832 files changed, 577651 insertions, 0 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
new file mode 100644
index 000000000..578a439e7
--- /dev/null
+++ b/drivers/usb/Kconfig
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB device configuration
+#
+
+config USB_OHCI_BIG_ENDIAN_DESC
+	bool
+
+config USB_OHCI_BIG_ENDIAN_MMIO
+	bool
+
+config USB_OHCI_LITTLE_ENDIAN
+	bool
+	default n if PPC_MPC52xx
+	default y
+
+config USB_EHCI_BIG_ENDIAN_MMIO
+	bool
+
+config USB_EHCI_BIG_ENDIAN_DESC
+	bool
+
+config USB_UHCI_BIG_ENDIAN_MMIO
+	bool
+
+config USB_UHCI_BIG_ENDIAN_DESC
+	bool
+
+menuconfig USB_SUPPORT
+	bool "USB support"
+	depends on HAS_IOMEM
+	default y
+	help
+	  This option adds core support for Universal Serial Bus (USB).
+	  You will also need drivers from the following menu to make use of it.
+
+if USB_SUPPORT
+
+source "drivers/usb/common/Kconfig"
+
+config USB_ARCH_HAS_HCD
+	def_bool y
+
+config USB
+	tristate "Support for Host-side USB"
+	depends on USB_ARCH_HAS_HCD
+	select GENERIC_ALLOCATOR
+	select USB_COMMON
+	select NLS  # for UTF-8 strings
+	help
+	  Universal Serial Bus (USB) is a specification for a serial bus
+	  subsystem which offers higher speeds and more features than the
+	  traditional PC serial port.  The bus supplies power to peripherals
+	  and allows for hot swapping.  Up to 127 USB peripherals can be
+	  connected to a single USB host in a tree structure.
+	  
+	  The USB host is the root of the tree, the peripherals are the
+	  leaves and the inner nodes are special USB devices called hubs.
+	  Most PCs now have USB host ports, used to connect peripherals
+	  such as scanners, keyboards, mice, modems, cameras, disks,
+	  flash memory, network links, and printers to the PC.
+
+	  Say Y here if your computer has a host-side USB port and you want
+	  to use USB devices.  You then need to say Y to at least one of the
+	  Host Controller Driver (HCD) options below.  Choose a USB 1.1
+	  controller, such as "UHCI HCD support" or "OHCI HCD support",
+	  and "EHCI HCD (USB 2.0) support" except for older systems that
+	  do not have USB 2.0 support.  It doesn't normally hurt to select
+	  them all if you are not certain.
+
+	  If your system has a device-side USB port, used in the peripheral
+	  side of the USB protocol, see the "USB Gadget" framework instead.
+
+	  After choosing your HCD, then select drivers for the USB peripherals
+	  you'll be using.  You may want to check out the information provided
+	  in <file:Documentation/usb/> and especially the links given in
+	  <file:Documentation/usb/usb-help.rst>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbcore.
+
+config USB_PCI
+	bool "PCI based USB host interface"
+	depends on PCI
+	default y
+	help
+	  Many embedded system SOCs (e.g. freescale T2080) have both
+	  PCI and USB modules with the USB module directly controlled by
+	  registers and having no relationship to the PCI module.
+
+	  If you have such a device you may say N here and PCI related code
+	  will not be built in the USB driver.
+
+if USB
+
+source "drivers/usb/core/Kconfig"
+
+source "drivers/usb/mon/Kconfig"
+
+source "drivers/usb/host/Kconfig"
+
+source "drivers/usb/renesas_usbhs/Kconfig"
+
+source "drivers/usb/class/Kconfig"
+
+source "drivers/usb/storage/Kconfig"
+
+source "drivers/usb/image/Kconfig"
+
+source "drivers/usb/usbip/Kconfig"
+
+endif
+
+source "drivers/usb/cdns3/Kconfig"
+
+source "drivers/usb/mtu3/Kconfig"
+
+source "drivers/usb/musb/Kconfig"
+
+source "drivers/usb/dwc3/Kconfig"
+
+source "drivers/usb/dwc2/Kconfig"
+
+source "drivers/usb/chipidea/Kconfig"
+
+source "drivers/usb/isp1760/Kconfig"
+
+comment "USB port drivers"
+
+if USB
+
+config USB_USS720
+	tristate "USS720 parport driver"
+	depends on PARPORT
+	select PARPORT_NOT_PC
+	help
+	  This driver is for USB parallel port adapters that use the Lucent
+	  Technologies USS-720 chip. These cables are plugged into your USB
+	  port and provide USB compatibility to peripherals designed with
+	  parallel port interfaces.
+
+	  The chip has two modes: automatic mode and manual mode. In automatic
+	  mode, it looks to the computer like a standard USB printer. Only
+	  printers may be connected to the USS-720 in this mode. The generic
+	  USB printer driver ("USB Printer support", above) may be used in
+	  that mode, and you can say N here if you want to use the chip only
+	  in this mode.
+
+	  Manual mode is not limited to printers, any parallel port
+	  device should work. This driver utilizes manual mode.
+	  Note however that some operations are three orders of magnitude
+	  slower than on a PCI/ISA Parallel Port, so timing critical
+	  applications might not work.
+
+	  Say Y here if you own an USS-720 USB->Parport cable and intend to
+	  connect anything other than a printer to it.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called uss720.
+
+source "drivers/usb/serial/Kconfig"
+
+source "drivers/usb/misc/Kconfig"
+
+source "drivers/usb/atm/Kconfig"
+
+endif # USB
+
+source "drivers/usb/phy/Kconfig"
+
+source "drivers/usb/gadget/Kconfig"
+
+source "drivers/usb/typec/Kconfig"
+
+source "drivers/usb/roles/Kconfig"
+
+endif # USB_SUPPORT
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
new file mode 100644
index 000000000..643edf5fe
--- /dev/null
+++ b/drivers/usb/Makefile
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the kernel USB device drivers.
+#
+
+# Object files in subdirectories
+
+obj-$(CONFIG_USB_COMMON)	+= common/
+obj-$(CONFIG_USB)		+= core/
+obj-$(CONFIG_USB_SUPPORT)	+= phy/
+
+obj-$(CONFIG_USB_DWC3)		+= dwc3/
+obj-$(CONFIG_USB_DWC2)		+= dwc2/
+obj-$(CONFIG_USB_ISP1760)	+= isp1760/
+
+obj-$(CONFIG_USB_CDNS_SUPPORT)	+= cdns3/
+obj-$(CONFIG_USB_CDNS3)		+= cdns3/
+obj-$(CONFIG_USB_CDNSP_PCI)	+= cdns3/
+
+obj-$(CONFIG_USB_MON)		+= mon/
+obj-$(CONFIG_USB_MTU3)		+= mtu3/
+
+obj-$(CONFIG_USB_PCI)		+= host/
+obj-$(CONFIG_USB_EHCI_HCD)	+= host/
+obj-$(CONFIG_USB_ISP116X_HCD)	+= host/
+obj-$(CONFIG_USB_OHCI_HCD)	+= host/
+obj-$(CONFIG_USB_UHCI_HCD)	+= host/
+obj-$(CONFIG_USB_FHCI_HCD)	+= host/
+obj-$(CONFIG_USB_XHCI_HCD)	+= host/
+obj-$(CONFIG_USB_SL811_HCD)	+= host/
+obj-$(CONFIG_USB_ISP1362_HCD)	+= host/
+obj-$(CONFIG_USB_U132_HCD)	+= host/
+obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
+obj-$(CONFIG_USB_FSL_USB2)	+= host/
+obj-$(CONFIG_USB_FOTG210_HCD)	+= host/
+obj-$(CONFIG_USB_MAX3421_HCD)	+= host/
+
+obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00/
+
+obj-$(CONFIG_USB_ACM)		+= class/
+obj-$(CONFIG_USB_PRINTER)	+= class/
+obj-$(CONFIG_USB_WDM)		+= class/
+obj-$(CONFIG_USB_TMC)		+= class/
+
+obj-$(CONFIG_USB_STORAGE)	+= storage/
+obj-$(CONFIG_USB)		+= storage/
+
+obj-$(CONFIG_USB_MDC800)	+= image/
+obj-$(CONFIG_USB_MICROTEK)	+= image/
+
+obj-$(CONFIG_USB_SERIAL)	+= serial/
+
+obj-$(CONFIG_USB)		+= misc/
+obj-$(CONFIG_EARLY_PRINTK_USB)	+= early/
+
+obj-$(CONFIG_USB_ATM)		+= atm/
+obj-$(CONFIG_USB_SPEEDTOUCH)	+= atm/
+
+obj-$(CONFIG_USB_MUSB_HDRC)	+= musb/
+obj-$(CONFIG_USB_CHIPIDEA)	+= chipidea/
+obj-$(CONFIG_USB_RENESAS_USBHS)	+= renesas_usbhs/
+obj-$(CONFIG_USB_GADGET)	+= gadget/
+
+obj-$(CONFIG_USBIP_CORE)	+= usbip/
+
+obj-$(CONFIG_TYPEC)		+= typec/
+
+obj-$(CONFIG_USB_ROLE_SWITCH)	+= roles/
diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig
new file mode 100644
index 000000000..3d958a1a1
--- /dev/null
+++ b/drivers/usb/atm/Kconfig
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB/ATM DSL configuration
+#
+
+menuconfig USB_ATM
+	tristate "USB DSL modem support"
+	depends on ATM
+	select CRC32
+	help
+	  Say Y here if you want to connect a USB Digital Subscriber Line (DSL)
+	  modem to your computer's USB port.  You will then need to choose your
+	  modem from the list below.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbatm.
+
+if USB_ATM
+
+config USB_SPEEDTOUCH
+	tristate "Speedtouch USB support"
+	select FW_LOADER
+	help
+	  Say Y here if you have an SpeedTouch USB or SpeedTouch 330
+	  modem.  In order to use your modem you will need to install the 
+	  two parts of the firmware, extracted by the user space tools; see
+	  <http://www.linux-usb.org/SpeedTouch/> for details.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called speedtch.
+
+config USB_CXACRU
+	tristate "Conexant AccessRunner USB support"
+	select FW_LOADER
+	help
+	  Say Y here if you have an ADSL USB modem based on the Conexant
+	  AccessRunner chipset.  In order to use your modem you will need to
+	  install the firmware, extracted by the user space tools; see
+	  <http://accessrunner.sourceforge.net/> for details.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cxacru.
+
+config USB_UEAGLEATM
+	tristate "ADI 930 and eagle USB DSL modem"
+	select FW_LOADER
+	help
+	  Say Y here if you have an ADSL USB modem based on the ADI 930
+	  or eagle chipset. In order to use your modem you will need to
+	  install firmwares and CMV (Command Management Variables); see
+	  <https://gna.org/projects/ueagleatm/> for details.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ueagle-atm.
+
+config USB_XUSBATM
+	tristate "Other USB DSL modem support"
+	help
+	  Say Y here if you have a DSL USB modem not explicitly supported by
+	  another USB DSL drivers.  In order to use your modem you will need to
+	  pass the vendor ID, product ID, and endpoint numbers for transmission
+	  and reception as module parameters.  You may need to initialize
+	  the modem using a user space utility (a firmware loader for example).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xusbatm.
+
+endif # USB_ATM
diff --git a/drivers/usb/atm/Makefile b/drivers/usb/atm/Makefile
new file mode 100644
index 000000000..7ac65ce1a
--- /dev/null
+++ b/drivers/usb/atm/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for USB ATM/xDSL drivers
+#
+obj-$(CONFIG_USB_CXACRU)	+= cxacru.o
+obj-$(CONFIG_USB_SPEEDTOUCH)	+= speedtch.o
+obj-$(CONFIG_USB_UEAGLEATM)	+= ueagle-atm.o
+obj-$(CONFIG_USB_ATM)		+= usbatm.o
+obj-$(CONFIG_USB_XUSBATM)	+= xusbatm.o
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
new file mode 100644
index 000000000..4ce7cba2b
--- /dev/null
+++ b/drivers/usb/atm/cxacru.c
@@ -0,0 +1,1378 @@
+// SPDX-License-Identifier: GPL-2.0+
+/******************************************************************************
+ *  cxacru.c  -  driver for USB ADSL modems based on
+ *               Conexant AccessRunner chipset
+ *
+ *  Copyright (C) 2004 David Woodhouse, Duncan Sands, Roman Kagan
+ *  Copyright (C) 2005 Duncan Sands, Roman Kagan (rkagan % mail ! ru)
+ *  Copyright (C) 2007 Simon Arlott
+ *  Copyright (C) 2009 Simon Arlott
+ ******************************************************************************/
+
+/*
+ *  Credit is due for Josep Comas, who created the original patch to speedtch.c
+ *  to support the different padding used by the AccessRunner (now generalized
+ *  into usbatm), and the userspace firmware loading utility.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/mutex.h>
+#include <asm/unaligned.h>
+
+#include "usbatm.h"
+
+#define DRIVER_AUTHOR	"Roman Kagan, David Woodhouse, Duncan Sands, Simon Arlott"
+#define DRIVER_DESC	"Conexant AccessRunner ADSL USB modem driver"
+
+static const char cxacru_driver_name[] = "cxacru";
+
+#define CXACRU_EP_CMD		0x01	/* Bulk/interrupt in/out */
+#define CXACRU_EP_DATA		0x02	/* Bulk in/out */
+
+#define CMD_PACKET_SIZE		64	/* Should be maxpacket(ep)? */
+#define CMD_MAX_CONFIG		((CMD_PACKET_SIZE / 4 - 1) / 2)
+
+/* Addresses */
+#define PLLFCLK_ADDR	0x00350068
+#define PLLBCLK_ADDR	0x0035006c
+#define SDRAMEN_ADDR	0x00350010
+#define FW_ADDR		0x00801000
+#define BR_ADDR		0x00180600
+#define SIG_ADDR	0x00180500
+#define BR_STACK_ADDR	0x00187f10
+
+/* Values */
+#define SDRAM_ENA	0x1
+
+#define CMD_TIMEOUT	2000	/* msecs */
+#define POLL_INTERVAL	1	/* secs */
+
+/* commands for interaction with the modem through the control channel before
+ * firmware is loaded  */
+enum cxacru_fw_request {
+	FW_CMD_ERR,
+	FW_GET_VER,
+	FW_READ_MEM,
+	FW_WRITE_MEM,
+	FW_RMW_MEM,
+	FW_CHECKSUM_MEM,
+	FW_GOTO_MEM,
+};
+
+/* commands for interaction with the modem through the control channel once
+ * firmware is loaded  */
+enum cxacru_cm_request {
+	CM_REQUEST_UNDEFINED = 0x80,
+	CM_REQUEST_TEST,
+	CM_REQUEST_CHIP_GET_MAC_ADDRESS,
+	CM_REQUEST_CHIP_GET_DP_VERSIONS,
+	CM_REQUEST_CHIP_ADSL_LINE_START,
+	CM_REQUEST_CHIP_ADSL_LINE_STOP,
+	CM_REQUEST_CHIP_ADSL_LINE_GET_STATUS,
+	CM_REQUEST_CHIP_ADSL_LINE_GET_SPEED,
+	CM_REQUEST_CARD_INFO_GET,
+	CM_REQUEST_CARD_DATA_GET,
+	CM_REQUEST_CARD_DATA_SET,
+	CM_REQUEST_COMMAND_HW_IO,
+	CM_REQUEST_INTERFACE_HW_IO,
+	CM_REQUEST_CARD_SERIAL_DATA_PATH_GET,
+	CM_REQUEST_CARD_SERIAL_DATA_PATH_SET,
+	CM_REQUEST_CARD_CONTROLLER_VERSION_GET,
+	CM_REQUEST_CARD_GET_STATUS,
+	CM_REQUEST_CARD_GET_MAC_ADDRESS,
+	CM_REQUEST_CARD_GET_DATA_LINK_STATUS,
+	CM_REQUEST_MAX,
+};
+
+/* commands for interaction with the flash memory
+ *
+ * read:  response is the contents of the first 60 bytes of flash memory
+ * write: request contains the 60 bytes of data to write to flash memory
+ *        response is the contents of the first 60 bytes of flash memory
+ *
+ * layout: PP PP VV VV  MM MM MM MM  MM MM ?? ??  SS SS SS SS  SS SS SS SS
+ *         SS SS SS SS  SS SS SS SS  00 00 00 00  00 00 00 00  00 00 00 00
+ *         00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00
+ *
+ *   P: le16  USB Product ID
+ *   V: le16  USB Vendor ID
+ *   M: be48  MAC Address
+ *   S: le16  ASCII Serial Number
+ */
+enum cxacru_cm_flash {
+	CM_FLASH_READ = 0xa1,
+	CM_FLASH_WRITE = 0xa2
+};
+
+/* reply codes to the commands above */
+enum cxacru_cm_status {
+	CM_STATUS_UNDEFINED,
+	CM_STATUS_SUCCESS,
+	CM_STATUS_ERROR,
+	CM_STATUS_UNSUPPORTED,
+	CM_STATUS_UNIMPLEMENTED,
+	CM_STATUS_PARAMETER_ERROR,
+	CM_STATUS_DBG_LOOPBACK,
+	CM_STATUS_MAX,
+};
+
+/* indices into CARD_INFO_GET return array */
+enum cxacru_info_idx {
+	CXINF_DOWNSTREAM_RATE,
+	CXINF_UPSTREAM_RATE,
+	CXINF_LINK_STATUS,
+	CXINF_LINE_STATUS,
+	CXINF_MAC_ADDRESS_HIGH,
+	CXINF_MAC_ADDRESS_LOW,
+	CXINF_UPSTREAM_SNR_MARGIN,
+	CXINF_DOWNSTREAM_SNR_MARGIN,
+	CXINF_UPSTREAM_ATTENUATION,
+	CXINF_DOWNSTREAM_ATTENUATION,
+	CXINF_TRANSMITTER_POWER,
+	CXINF_UPSTREAM_BITS_PER_FRAME,
+	CXINF_DOWNSTREAM_BITS_PER_FRAME,
+	CXINF_STARTUP_ATTEMPTS,
+	CXINF_UPSTREAM_CRC_ERRORS,
+	CXINF_DOWNSTREAM_CRC_ERRORS,
+	CXINF_UPSTREAM_FEC_ERRORS,
+	CXINF_DOWNSTREAM_FEC_ERRORS,
+	CXINF_UPSTREAM_HEC_ERRORS,
+	CXINF_DOWNSTREAM_HEC_ERRORS,
+	CXINF_LINE_STARTABLE,
+	CXINF_MODULATION,
+	CXINF_ADSL_HEADEND,
+	CXINF_ADSL_HEADEND_ENVIRONMENT,
+	CXINF_CONTROLLER_VERSION,
+	/* dunno what the missing two mean */
+	CXINF_MAX = 0x1c,
+};
+
+enum cxacru_poll_state {
+	CXPOLL_STOPPING,
+	CXPOLL_STOPPED,
+	CXPOLL_POLLING,
+	CXPOLL_SHUTDOWN
+};
+
+struct cxacru_modem_type {
+	u32 pll_f_clk;
+	u32 pll_b_clk;
+	int boot_rom_patch;
+};
+
+struct cxacru_data {
+	struct usbatm_data *usbatm;
+
+	const struct cxacru_modem_type *modem_type;
+
+	int line_status;
+	struct mutex adsl_state_serialize;
+	int adsl_status;
+	struct delayed_work poll_work;
+	u32 card_info[CXINF_MAX];
+	struct mutex poll_state_serialize;
+	enum cxacru_poll_state poll_state;
+
+	/* control handles */
+	struct mutex cm_serialize;
+	u8 *rcv_buf;
+	u8 *snd_buf;
+	struct urb *rcv_urb;
+	struct urb *snd_urb;
+	struct completion rcv_done;
+	struct completion snd_done;
+};
+
+static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
+	u8 *wdata, int wsize, u8 *rdata, int rsize);
+static void cxacru_poll_status(struct work_struct *work);
+
+/* Card info exported through sysfs */
+#define CXACRU__ATTR_INIT(_name) \
+static DEVICE_ATTR_RO(_name)
+
+#define CXACRU_CMD_INIT(_name) \
+static DEVICE_ATTR_RW(_name)
+
+#define CXACRU_SET_INIT(_name) \
+static DEVICE_ATTR_WO(_name)
+
+#define CXACRU_ATTR_INIT(_value, _type, _name) \
+static ssize_t _name##_show(struct device *dev, \
+	struct device_attribute *attr, char *buf) \
+{ \
+	struct cxacru_data *instance = to_usbatm_driver_data(\
+		to_usb_interface(dev)); \
+\
+	if (instance == NULL) \
+		return -ENODEV; \
+\
+	return cxacru_sysfs_showattr_##_type(instance->card_info[_value], buf); \
+} \
+CXACRU__ATTR_INIT(_name)
+
+#define CXACRU_ATTR_CREATE(_v, _t, _name) CXACRU_DEVICE_CREATE_FILE(_name)
+#define CXACRU_CMD_CREATE(_name)          CXACRU_DEVICE_CREATE_FILE(_name)
+#define CXACRU_SET_CREATE(_name)          CXACRU_DEVICE_CREATE_FILE(_name)
+#define CXACRU__ATTR_CREATE(_name)        CXACRU_DEVICE_CREATE_FILE(_name)
+
+#define CXACRU_ATTR_REMOVE(_v, _t, _name) CXACRU_DEVICE_REMOVE_FILE(_name)
+#define CXACRU_CMD_REMOVE(_name)          CXACRU_DEVICE_REMOVE_FILE(_name)
+#define CXACRU_SET_REMOVE(_name)          CXACRU_DEVICE_REMOVE_FILE(_name)
+#define CXACRU__ATTR_REMOVE(_name)        CXACRU_DEVICE_REMOVE_FILE(_name)
+
+static ssize_t cxacru_sysfs_showattr_u32(u32 value, char *buf)
+{
+	return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t cxacru_sysfs_showattr_s8(s8 value, char *buf)
+{
+	return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf)
+{
+	if (likely(value >= 0)) {
+		return snprintf(buf, PAGE_SIZE, "%u.%02u\n",
+					value / 100, value % 100);
+	} else {
+		value = -value;
+		return snprintf(buf, PAGE_SIZE, "-%u.%02u\n",
+					value / 100, value % 100);
+	}
+}
+
+static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf)
+{
+	static char *str[] = { "no", "yes" };
+
+	if (unlikely(value >= ARRAY_SIZE(str)))
+		return sprintf(buf, "%u\n", value);
+	return sprintf(buf, "%s\n", str[value]);
+}
+
+static ssize_t cxacru_sysfs_showattr_LINK(u32 value, char *buf)
+{
+	static char *str[] = { NULL, "not connected", "connected", "lost" };
+
+	if (unlikely(value >= ARRAY_SIZE(str) || str[value] == NULL))
+		return sprintf(buf, "%u\n", value);
+	return sprintf(buf, "%s\n", str[value]);
+}
+
+static ssize_t cxacru_sysfs_showattr_LINE(u32 value, char *buf)
+{
+	static char *str[] = { "down", "attempting to activate",
+		"training", "channel analysis", "exchange", "up",
+		"waiting", "initialising"
+	};
+	if (unlikely(value >= ARRAY_SIZE(str)))
+		return sprintf(buf, "%u\n", value);
+	return sprintf(buf, "%s\n", str[value]);
+}
+
+static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf)
+{
+	static char *str[] = {
+			"",
+			"ANSI T1.413",
+			"ITU-T G.992.1 (G.DMT)",
+			"ITU-T G.992.2 (G.LITE)"
+	};
+	if (unlikely(value >= ARRAY_SIZE(str)))
+		return sprintf(buf, "%u\n", value);
+	return sprintf(buf, "%s\n", str[value]);
+}
+
+/*
+ * This could use MAC_ADDRESS_HIGH and MAC_ADDRESS_LOW, but since
+ * this data is already in atm_dev there's no point.
+ *
+ * MAC_ADDRESS_HIGH = 0x????5544
+ * MAC_ADDRESS_LOW  = 0x33221100
+ * Where 00-55 are bytes 0-5 of the MAC.
+ */
+static ssize_t mac_address_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct cxacru_data *instance = to_usbatm_driver_data(
+			to_usb_interface(dev));
+
+	if (instance == NULL || instance->usbatm->atm_dev == NULL)
+		return -ENODEV;
+
+	return sprintf(buf, "%pM\n", instance->usbatm->atm_dev->esi);
+}
+
+static ssize_t adsl_state_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	static char *str[] = { "running", "stopped" };
+	struct cxacru_data *instance = to_usbatm_driver_data(
+			to_usb_interface(dev));
+	u32 value;
+
+	if (instance == NULL)
+		return -ENODEV;
+
+	value = instance->card_info[CXINF_LINE_STARTABLE];
+	if (unlikely(value >= ARRAY_SIZE(str)))
+		return sprintf(buf, "%u\n", value);
+	return sprintf(buf, "%s\n", str[value]);
+}
+
+static ssize_t adsl_state_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct cxacru_data *instance = to_usbatm_driver_data(
+			to_usb_interface(dev));
+	int ret;
+	int poll = -1;
+	char str_cmd[8];
+	int len = strlen(buf);
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EACCES;
+
+	ret = sscanf(buf, "%7s", str_cmd);
+	if (ret != 1)
+		return -EINVAL;
+	ret = 0;
+
+	if (instance == NULL)
+		return -ENODEV;
+
+	if (mutex_lock_interruptible(&instance->adsl_state_serialize))
+		return -ERESTARTSYS;
+
+	if (!strcmp(str_cmd, "stop") || !strcmp(str_cmd, "restart")) {
+		ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_STOP, NULL, 0, NULL, 0);
+		if (ret < 0) {
+			atm_err(instance->usbatm, "change adsl state:"
+				" CHIP_ADSL_LINE_STOP returned %d\n", ret);
+
+			ret = -EIO;
+		} else {
+			ret = len;
+			poll = CXPOLL_STOPPED;
+		}
+	}
+
+	/* Line status is only updated every second
+	 * and the device appears to only react to
+	 * START/STOP every second too. Wait 1.5s to
+	 * be sure that restart will have an effect. */
+	if (!strcmp(str_cmd, "restart"))
+		msleep(1500);
+
+	if (!strcmp(str_cmd, "start") || !strcmp(str_cmd, "restart")) {
+		ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0);
+		if (ret < 0) {
+			atm_err(instance->usbatm, "change adsl state:"
+				" CHIP_ADSL_LINE_START returned %d\n", ret);
+
+			ret = -EIO;
+		} else {
+			ret = len;
+			poll = CXPOLL_POLLING;
+		}
+	}
+
+	if (!strcmp(str_cmd, "poll")) {
+		ret = len;
+		poll = CXPOLL_POLLING;
+	}
+
+	if (ret == 0) {
+		ret = -EINVAL;
+		poll = -1;
+	}
+
+	if (poll == CXPOLL_POLLING) {
+		mutex_lock(&instance->poll_state_serialize);
+		switch (instance->poll_state) {
+		case CXPOLL_STOPPED:
+			/* start polling */
+			instance->poll_state = CXPOLL_POLLING;
+			break;
+
+		case CXPOLL_STOPPING:
+			/* abort stop request */
+			instance->poll_state = CXPOLL_POLLING;
+			fallthrough;
+		case CXPOLL_POLLING:
+		case CXPOLL_SHUTDOWN:
+			/* don't start polling */
+			poll = -1;
+		}
+		mutex_unlock(&instance->poll_state_serialize);
+	} else if (poll == CXPOLL_STOPPED) {
+		mutex_lock(&instance->poll_state_serialize);
+		/* request stop */
+		if (instance->poll_state == CXPOLL_POLLING)
+			instance->poll_state = CXPOLL_STOPPING;
+		mutex_unlock(&instance->poll_state_serialize);
+	}
+
+	mutex_unlock(&instance->adsl_state_serialize);
+
+	if (poll == CXPOLL_POLLING)
+		cxacru_poll_status(&instance->poll_work.work);
+
+	return ret;
+}
+
+/* CM_REQUEST_CARD_DATA_GET times out, so no show attribute */
+
+static ssize_t adsl_config_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct cxacru_data *instance = to_usbatm_driver_data(
+			to_usb_interface(dev));
+	int len = strlen(buf);
+	int ret, pos, num;
+	__le32 data[CMD_PACKET_SIZE / 4];
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EACCES;
+
+	if (instance == NULL)
+		return -ENODEV;
+
+	pos = 0;
+	num = 0;
+	while (pos < len) {
+		int tmp;
+		u32 index;
+		u32 value;
+
+		ret = sscanf(buf + pos, "%x=%x%n", &index, &value, &tmp);
+		if (ret < 2)
+			return -EINVAL;
+		if (index > 0x7f)
+			return -EINVAL;
+		if (tmp < 0 || tmp > len - pos)
+			return -EINVAL;
+		pos += tmp;
+
+		/* skip trailing newline */
+		if (buf[pos] == '\n' && pos == len-1)
+			pos++;
+
+		data[num * 2 + 1] = cpu_to_le32(index);
+		data[num * 2 + 2] = cpu_to_le32(value);
+		num++;
+
+		/* send config values when data buffer is full
+		 * or no more data
+		 */
+		if (pos >= len || num >= CMD_MAX_CONFIG) {
+			char log[CMD_MAX_CONFIG * 12 + 1]; /* %02x=%08x */
+
+			data[0] = cpu_to_le32(num);
+			ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET,
+				(u8 *) data, 4 + num * 8, NULL, 0);
+			if (ret < 0) {
+				atm_err(instance->usbatm,
+					"set card data returned %d\n", ret);
+				return -EIO;
+			}
+
+			for (tmp = 0; tmp < num; tmp++)
+				snprintf(log + tmp*12, 13, " %02x=%08x",
+					le32_to_cpu(data[tmp * 2 + 1]),
+					le32_to_cpu(data[tmp * 2 + 2]));
+			atm_info(instance->usbatm, "config%s\n", log);
+			num = 0;
+		}
+	}
+
+	return len;
+}
+
+/*
+ * All device attributes are included in CXACRU_ALL_FILES
+ * so that the same list can be used multiple times:
+ *     INIT   (define the device attributes)
+ *     CREATE (create all the device files)
+ *     REMOVE (remove all the device files)
+ *
+ * With the last two being defined as needed in the functions
+ * they are used in before calling CXACRU_ALL_FILES()
+ */
+#define CXACRU_ALL_FILES(_action) \
+CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_RATE,           u32,  downstream_rate); \
+CXACRU_ATTR_##_action(CXINF_UPSTREAM_RATE,             u32,  upstream_rate); \
+CXACRU_ATTR_##_action(CXINF_LINK_STATUS,               LINK, link_status); \
+CXACRU_ATTR_##_action(CXINF_LINE_STATUS,               LINE, line_status); \
+CXACRU__ATTR_##_action(                                      mac_address); \
+CXACRU_ATTR_##_action(CXINF_UPSTREAM_SNR_MARGIN,       dB,   upstream_snr_margin); \
+CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_SNR_MARGIN,     dB,   downstream_snr_margin); \
+CXACRU_ATTR_##_action(CXINF_UPSTREAM_ATTENUATION,      dB,   upstream_attenuation); \
+CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_ATTENUATION,    dB,   downstream_attenuation); \
+CXACRU_ATTR_##_action(CXINF_TRANSMITTER_POWER,         s8,   transmitter_power); \
+CXACRU_ATTR_##_action(CXINF_UPSTREAM_BITS_PER_FRAME,   u32,  upstream_bits_per_frame); \
+CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_BITS_PER_FRAME, u32,  downstream_bits_per_frame); \
+CXACRU_ATTR_##_action(CXINF_STARTUP_ATTEMPTS,          u32,  startup_attempts); \
+CXACRU_ATTR_##_action(CXINF_UPSTREAM_CRC_ERRORS,       u32,  upstream_crc_errors); \
+CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_CRC_ERRORS,     u32,  downstream_crc_errors); \
+CXACRU_ATTR_##_action(CXINF_UPSTREAM_FEC_ERRORS,       u32,  upstream_fec_errors); \
+CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_FEC_ERRORS,     u32,  downstream_fec_errors); \
+CXACRU_ATTR_##_action(CXINF_UPSTREAM_HEC_ERRORS,       u32,  upstream_hec_errors); \
+CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_HEC_ERRORS,     u32,  downstream_hec_errors); \
+CXACRU_ATTR_##_action(CXINF_LINE_STARTABLE,            bool, line_startable); \
+CXACRU_ATTR_##_action(CXINF_MODULATION,                MODU, modulation); \
+CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND,              u32,  adsl_headend); \
+CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND_ENVIRONMENT,  u32,  adsl_headend_environment); \
+CXACRU_ATTR_##_action(CXINF_CONTROLLER_VERSION,        u32,  adsl_controller_version); \
+CXACRU_CMD_##_action(                                        adsl_state); \
+CXACRU_SET_##_action(                                        adsl_config);
+
+CXACRU_ALL_FILES(INIT);
+
+static struct attribute *cxacru_attrs[] = {
+	&dev_attr_adsl_config.attr,
+	&dev_attr_adsl_state.attr,
+	&dev_attr_adsl_controller_version.attr,
+	&dev_attr_adsl_headend_environment.attr,
+	&dev_attr_adsl_headend.attr,
+	&dev_attr_modulation.attr,
+	&dev_attr_line_startable.attr,
+	&dev_attr_downstream_hec_errors.attr,
+	&dev_attr_upstream_hec_errors.attr,
+	&dev_attr_downstream_fec_errors.attr,
+	&dev_attr_upstream_fec_errors.attr,
+	&dev_attr_downstream_crc_errors.attr,
+	&dev_attr_upstream_crc_errors.attr,
+	&dev_attr_startup_attempts.attr,
+	&dev_attr_downstream_bits_per_frame.attr,
+	&dev_attr_upstream_bits_per_frame.attr,
+	&dev_attr_transmitter_power.attr,
+	&dev_attr_downstream_attenuation.attr,
+	&dev_attr_upstream_attenuation.attr,
+	&dev_attr_downstream_snr_margin.attr,
+	&dev_attr_upstream_snr_margin.attr,
+	&dev_attr_mac_address.attr,
+	&dev_attr_line_status.attr,
+	&dev_attr_link_status.attr,
+	&dev_attr_upstream_rate.attr,
+	&dev_attr_downstream_rate.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(cxacru);
+
+/* the following three functions are stolen from drivers/usb/core/message.c */
+static void cxacru_blocking_completion(struct urb *urb)
+{
+	complete(urb->context);
+}
+
+struct cxacru_timer {
+	struct timer_list timer;
+	struct urb *urb;
+};
+
+static void cxacru_timeout_kill(struct timer_list *t)
+{
+	struct cxacru_timer *timer = from_timer(timer, t, timer);
+
+	usb_unlink_urb(timer->urb);
+}
+
+static int cxacru_start_wait_urb(struct urb *urb, struct completion *done,
+				 int *actual_length)
+{
+	struct cxacru_timer timer = {
+		.urb = urb,
+	};
+
+	timer_setup_on_stack(&timer.timer, cxacru_timeout_kill, 0);
+	mod_timer(&timer.timer, jiffies + msecs_to_jiffies(CMD_TIMEOUT));
+	wait_for_completion(done);
+	del_timer_sync(&timer.timer);
+	destroy_timer_on_stack(&timer.timer);
+
+	if (actual_length)
+		*actual_length = urb->actual_length;
+	return urb->status; /* must read status after completion */
+}
+
+static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
+		     u8 *wdata, int wsize, u8 *rdata, int rsize)
+{
+	int ret, actlen;
+	int offb, offd;
+	const int stride = CMD_PACKET_SIZE - 4;
+	u8 *wbuf = instance->snd_buf;
+	u8 *rbuf = instance->rcv_buf;
+	int wbuflen = ((wsize - 1) / stride + 1) * CMD_PACKET_SIZE;
+	int rbuflen = ((rsize - 1) / stride + 1) * CMD_PACKET_SIZE;
+
+	if (wbuflen > PAGE_SIZE || rbuflen > PAGE_SIZE) {
+		if (printk_ratelimit())
+			usb_err(instance->usbatm, "requested transfer size too large (%d, %d)\n",
+				wbuflen, rbuflen);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	mutex_lock(&instance->cm_serialize);
+
+	/* submit reading urb before the writing one */
+	init_completion(&instance->rcv_done);
+	ret = usb_submit_urb(instance->rcv_urb, GFP_KERNEL);
+	if (ret < 0) {
+		if (printk_ratelimit())
+			usb_err(instance->usbatm, "submit of read urb for cm %#x failed (%d)\n",
+				cm, ret);
+		goto fail;
+	}
+
+	memset(wbuf, 0, wbuflen);
+	/* handle wsize == 0 */
+	wbuf[0] = cm;
+	for (offb = offd = 0; offd < wsize; offd += stride, offb += CMD_PACKET_SIZE) {
+		wbuf[offb] = cm;
+		memcpy(wbuf + offb + 4, wdata + offd, min_t(int, stride, wsize - offd));
+	}
+
+	instance->snd_urb->transfer_buffer_length = wbuflen;
+	init_completion(&instance->snd_done);
+	ret = usb_submit_urb(instance->snd_urb, GFP_KERNEL);
+	if (ret < 0) {
+		if (printk_ratelimit())
+			usb_err(instance->usbatm, "submit of write urb for cm %#x failed (%d)\n",
+				cm, ret);
+		goto fail;
+	}
+
+	ret = cxacru_start_wait_urb(instance->snd_urb, &instance->snd_done, NULL);
+	if (ret < 0) {
+		if (printk_ratelimit())
+			usb_err(instance->usbatm, "send of cm %#x failed (%d)\n", cm, ret);
+		goto fail;
+	}
+
+	ret = cxacru_start_wait_urb(instance->rcv_urb, &instance->rcv_done, &actlen);
+	if (ret < 0) {
+		if (printk_ratelimit())
+			usb_err(instance->usbatm, "receive of cm %#x failed (%d)\n", cm, ret);
+		goto fail;
+	}
+	if (actlen % CMD_PACKET_SIZE || !actlen) {
+		if (printk_ratelimit())
+			usb_err(instance->usbatm, "invalid response length to cm %#x: %d\n",
+				cm, actlen);
+		ret = -EIO;
+		goto fail;
+	}
+
+	/* check the return status and copy the data to the output buffer, if needed */
+	for (offb = offd = 0; offd < rsize && offb < actlen; offb += CMD_PACKET_SIZE) {
+		if (rbuf[offb] != cm) {
+			if (printk_ratelimit())
+				usb_err(instance->usbatm, "wrong cm %#x in response to cm %#x\n",
+					rbuf[offb], cm);
+			ret = -EIO;
+			goto fail;
+		}
+		if (rbuf[offb + 1] != CM_STATUS_SUCCESS) {
+			if (printk_ratelimit())
+				usb_err(instance->usbatm, "response to cm %#x failed: %#x\n",
+					cm, rbuf[offb + 1]);
+			ret = -EIO;
+			goto fail;
+		}
+		if (offd >= rsize)
+			break;
+		memcpy(rdata + offd, rbuf + offb + 4, min_t(int, stride, rsize - offd));
+		offd += stride;
+	}
+
+	ret = offd;
+	usb_dbg(instance->usbatm, "cm %#x\n", cm);
+fail:
+	mutex_unlock(&instance->cm_serialize);
+err:
+	return ret;
+}
+
+static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_request cm,
+			       u32 *data, int size)
+{
+	int ret, len;
+	__le32 *buf;
+	int offb;
+	unsigned int offd;
+	const int stride = CMD_PACKET_SIZE / (4 * 2) - 1;
+	int buflen =  ((size - 1) / stride + 1 + size * 2) * 4;
+
+	buf = kmalloc(buflen, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = cxacru_cm(instance, cm, NULL, 0, (u8 *) buf, buflen);
+	if (ret < 0)
+		goto cleanup;
+
+	/* len > 0 && len % 4 == 0 guaranteed by cxacru_cm() */
+	len = ret / 4;
+	for (offb = 0; offb < len; ) {
+		int l = le32_to_cpu(buf[offb++]);
+
+		if (l < 0 || l > stride || l > (len - offb) / 2) {
+			if (printk_ratelimit())
+				usb_err(instance->usbatm, "invalid data length from cm %#x: %d\n",
+					cm, l);
+			ret = -EIO;
+			goto cleanup;
+		}
+		while (l--) {
+			offd = le32_to_cpu(buf[offb++]);
+			if (offd >= size) {
+				if (printk_ratelimit())
+					usb_err(instance->usbatm, "wrong index %#x in response to cm %#x\n",
+						offd, cm);
+				ret = -EIO;
+				goto cleanup;
+			}
+			data[offd] = le32_to_cpu(buf[offb++]);
+		}
+	}
+
+	ret = 0;
+
+cleanup:
+	kfree(buf);
+	return ret;
+}
+
+static int cxacru_card_status(struct cxacru_data *instance)
+{
+	int ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0);
+
+	if (ret < 0) {		/* firmware not loaded */
+		usb_dbg(instance->usbatm, "cxacru_adsl_start: CARD_GET_STATUS returned %d\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
+		struct atm_dev *atm_dev)
+{
+	struct cxacru_data *instance = usbatm_instance->driver_data;
+	struct usb_interface *intf = usbatm_instance->usb_intf;
+	int ret;
+	int start_polling = 1;
+
+	dev_dbg(&intf->dev, "%s\n", __func__);
+
+	/* Read MAC address */
+	ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_MAC_ADDRESS, NULL, 0,
+			atm_dev->esi, sizeof(atm_dev->esi));
+	if (ret < 0) {
+		atm_err(usbatm_instance, "cxacru_atm_start: CARD_GET_MAC_ADDRESS returned %d\n", ret);
+		return ret;
+	}
+
+	/* start ADSL */
+	mutex_lock(&instance->adsl_state_serialize);
+	ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0);
+	if (ret < 0)
+		atm_err(usbatm_instance, "cxacru_atm_start: CHIP_ADSL_LINE_START returned %d\n", ret);
+
+	/* Start status polling */
+	mutex_lock(&instance->poll_state_serialize);
+	switch (instance->poll_state) {
+	case CXPOLL_STOPPED:
+		/* start polling */
+		instance->poll_state = CXPOLL_POLLING;
+		break;
+
+	case CXPOLL_STOPPING:
+		/* abort stop request */
+		instance->poll_state = CXPOLL_POLLING;
+		fallthrough;
+	case CXPOLL_POLLING:
+	case CXPOLL_SHUTDOWN:
+		/* don't start polling */
+		start_polling = 0;
+	}
+	mutex_unlock(&instance->poll_state_serialize);
+	mutex_unlock(&instance->adsl_state_serialize);
+
+	if (start_polling)
+		cxacru_poll_status(&instance->poll_work.work);
+	return 0;
+}
+
+static void cxacru_poll_status(struct work_struct *work)
+{
+	struct cxacru_data *instance =
+		container_of(work, struct cxacru_data, poll_work.work);
+	u32 buf[CXINF_MAX] = {};
+	struct usbatm_data *usbatm = instance->usbatm;
+	struct atm_dev *atm_dev = usbatm->atm_dev;
+	int keep_polling = 1;
+	int ret;
+
+	ret = cxacru_cm_get_array(instance, CM_REQUEST_CARD_INFO_GET, buf, CXINF_MAX);
+	if (ret < 0) {
+		if (ret != -ESHUTDOWN)
+			atm_warn(usbatm, "poll status: error %d\n", ret);
+
+		mutex_lock(&instance->poll_state_serialize);
+		if (instance->poll_state != CXPOLL_SHUTDOWN) {
+			instance->poll_state = CXPOLL_STOPPED;
+
+			if (ret != -ESHUTDOWN)
+				atm_warn(usbatm, "polling disabled, set adsl_state"
+						" to 'start' or 'poll' to resume\n");
+		}
+		mutex_unlock(&instance->poll_state_serialize);
+		goto reschedule;
+	}
+
+	memcpy(instance->card_info, buf, sizeof(instance->card_info));
+
+	if (instance->adsl_status != buf[CXINF_LINE_STARTABLE]) {
+		instance->adsl_status = buf[CXINF_LINE_STARTABLE];
+
+		switch (instance->adsl_status) {
+		case 0:
+			atm_info(usbatm, "ADSL state: running\n");
+			break;
+
+		case 1:
+			atm_info(usbatm, "ADSL state: stopped\n");
+			break;
+
+		default:
+			atm_info(usbatm, "Unknown adsl status %02x\n", instance->adsl_status);
+			break;
+		}
+	}
+
+	if (instance->line_status == buf[CXINF_LINE_STATUS])
+		goto reschedule;
+
+	instance->line_status = buf[CXINF_LINE_STATUS];
+	switch (instance->line_status) {
+	case 0:
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
+		atm_info(usbatm, "ADSL line: down\n");
+		break;
+
+	case 1:
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
+		atm_info(usbatm, "ADSL line: attempting to activate\n");
+		break;
+
+	case 2:
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
+		atm_info(usbatm, "ADSL line: training\n");
+		break;
+
+	case 3:
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
+		atm_info(usbatm, "ADSL line: channel analysis\n");
+		break;
+
+	case 4:
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
+		atm_info(usbatm, "ADSL line: exchange\n");
+		break;
+
+	case 5:
+		atm_dev->link_rate = buf[CXINF_DOWNSTREAM_RATE] * 1000 / 424;
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_FOUND);
+
+		atm_info(usbatm, "ADSL line: up (%d kb/s down | %d kb/s up)\n",
+		     buf[CXINF_DOWNSTREAM_RATE], buf[CXINF_UPSTREAM_RATE]);
+		break;
+
+	case 6:
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
+		atm_info(usbatm, "ADSL line: waiting\n");
+		break;
+
+	case 7:
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
+		atm_info(usbatm, "ADSL line: initializing\n");
+		break;
+
+	default:
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN);
+		atm_info(usbatm, "Unknown line state %02x\n", instance->line_status);
+		break;
+	}
+reschedule:
+
+	mutex_lock(&instance->poll_state_serialize);
+	if (instance->poll_state == CXPOLL_STOPPING &&
+				instance->adsl_status == 1 && /* stopped */
+				instance->line_status == 0) /* down */
+		instance->poll_state = CXPOLL_STOPPED;
+
+	if (instance->poll_state == CXPOLL_STOPPED)
+		keep_polling = 0;
+	mutex_unlock(&instance->poll_state_serialize);
+
+	if (keep_polling)
+		schedule_delayed_work(&instance->poll_work,
+				round_jiffies_relative(POLL_INTERVAL*HZ));
+}
+
+static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw,
+		     u8 code1, u8 code2, u32 addr, const u8 *data, int size)
+{
+	int ret;
+	u8 *buf;
+	int offd, offb;
+	const int stride = CMD_PACKET_SIZE - 8;
+
+	buf = (u8 *) __get_free_page(GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	offb = offd = 0;
+	do {
+		int l = min_t(int, stride, size - offd);
+
+		buf[offb++] = fw;
+		buf[offb++] = l;
+		buf[offb++] = code1;
+		buf[offb++] = code2;
+		put_unaligned(cpu_to_le32(addr), (__le32 *)(buf + offb));
+		offb += 4;
+		addr += l;
+		if (l)
+			memcpy(buf + offb, data + offd, l);
+		if (l < stride)
+			memset(buf + offb + l, 0, stride - l);
+		offb += stride;
+		offd += stride;
+		if ((offb >= PAGE_SIZE) || (offd >= size)) {
+			ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD),
+					   buf, offb, NULL, CMD_TIMEOUT);
+			if (ret < 0) {
+				dev_dbg(&usb_dev->dev, "sending fw %#x failed\n", fw);
+				goto cleanup;
+			}
+			offb = 0;
+		}
+	} while (offd < size);
+	dev_dbg(&usb_dev->dev, "sent fw %#x\n", fw);
+
+	ret = 0;
+
+cleanup:
+	free_page((unsigned long) buf);
+	return ret;
+}
+
+static void cxacru_upload_firmware(struct cxacru_data *instance,
+				   const struct firmware *fw,
+				   const struct firmware *bp)
+{
+	int ret;
+	struct usbatm_data *usbatm = instance->usbatm;
+	struct usb_device *usb_dev = usbatm->usb_dev;
+	__le16 signature[] = { usb_dev->descriptor.idVendor,
+			       usb_dev->descriptor.idProduct };
+	__le32 val;
+
+	usb_dbg(usbatm, "%s\n", __func__);
+
+	/* FirmwarePllFClkValue */
+	val = cpu_to_le32(instance->modem_type->pll_f_clk);
+	ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLFCLK_ADDR, (u8 *) &val, 4);
+	if (ret) {
+		usb_err(usbatm, "FirmwarePllFClkValue failed: %d\n", ret);
+		return;
+	}
+
+	/* FirmwarePllBClkValue */
+	val = cpu_to_le32(instance->modem_type->pll_b_clk);
+	ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLBCLK_ADDR, (u8 *) &val, 4);
+	if (ret) {
+		usb_err(usbatm, "FirmwarePllBClkValue failed: %d\n", ret);
+		return;
+	}
+
+	/* Enable SDRAM */
+	val = cpu_to_le32(SDRAM_ENA);
+	ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SDRAMEN_ADDR, (u8 *) &val, 4);
+	if (ret) {
+		usb_err(usbatm, "Enable SDRAM failed: %d\n", ret);
+		return;
+	}
+
+	/* Firmware */
+	usb_info(usbatm, "loading firmware\n");
+	ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, FW_ADDR, fw->data, fw->size);
+	if (ret) {
+		usb_err(usbatm, "Firmware upload failed: %d\n", ret);
+		return;
+	}
+
+	/* Boot ROM patch */
+	if (instance->modem_type->boot_rom_patch) {
+		usb_info(usbatm, "loading boot ROM patch\n");
+		ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_ADDR, bp->data, bp->size);
+		if (ret) {
+			usb_err(usbatm, "Boot ROM patching failed: %d\n", ret);
+			return;
+		}
+	}
+
+	/* Signature */
+	ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SIG_ADDR, (u8 *) signature, 4);
+	if (ret) {
+		usb_err(usbatm, "Signature storing failed: %d\n", ret);
+		return;
+	}
+
+	usb_info(usbatm, "starting device\n");
+	if (instance->modem_type->boot_rom_patch) {
+		val = cpu_to_le32(BR_ADDR);
+		ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_STACK_ADDR, (u8 *) &val, 4);
+	} else {
+		ret = cxacru_fw(usb_dev, FW_GOTO_MEM, 0x0, 0x0, FW_ADDR, NULL, 0);
+	}
+	if (ret) {
+		usb_err(usbatm, "Passing control to firmware failed: %d\n", ret);
+		return;
+	}
+
+	/* Delay to allow firmware to start up. */
+	msleep_interruptible(1000);
+
+	usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD));
+	usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD));
+	usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_DATA));
+	usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_DATA));
+
+	ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0);
+	if (ret < 0) {
+		usb_err(usbatm, "modem failed to initialize: %d\n", ret);
+		return;
+	}
+}
+
+static int cxacru_find_firmware(struct cxacru_data *instance,
+				char *phase, const struct firmware **fw_p)
+{
+	struct usbatm_data *usbatm = instance->usbatm;
+	struct device *dev = &usbatm->usb_intf->dev;
+	char buf[16];
+
+	sprintf(buf, "cxacru-%s.bin", phase);
+	usb_dbg(usbatm, "cxacru_find_firmware: looking for %s\n", buf);
+
+	if (request_firmware(fw_p, buf, dev)) {
+		usb_dbg(usbatm, "no stage %s firmware found\n", phase);
+		return -ENOENT;
+	}
+
+	usb_info(usbatm, "found firmware %s\n", buf);
+
+	return 0;
+}
+
+static int cxacru_heavy_init(struct usbatm_data *usbatm_instance,
+			     struct usb_interface *usb_intf)
+{
+	const struct firmware *fw, *bp;
+	struct cxacru_data *instance = usbatm_instance->driver_data;
+	int ret = cxacru_find_firmware(instance, "fw", &fw);
+
+	if (ret) {
+		usb_warn(usbatm_instance, "firmware (cxacru-fw.bin) unavailable (system misconfigured?)\n");
+		return ret;
+	}
+
+	if (instance->modem_type->boot_rom_patch) {
+		ret = cxacru_find_firmware(instance, "bp", &bp);
+		if (ret) {
+			usb_warn(usbatm_instance, "boot ROM patch (cxacru-bp.bin) unavailable (system misconfigured?)\n");
+			release_firmware(fw);
+			return ret;
+		}
+	}
+
+	cxacru_upload_firmware(instance, fw, bp);
+
+	if (instance->modem_type->boot_rom_patch)
+		release_firmware(bp);
+	release_firmware(fw);
+
+	ret = cxacru_card_status(instance);
+	if (ret)
+		usb_dbg(usbatm_instance, "modem initialisation failed\n");
+	else
+		usb_dbg(usbatm_instance, "done setting up the modem\n");
+
+	return ret;
+}
+
+static int cxacru_bind(struct usbatm_data *usbatm_instance,
+		       struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct cxacru_data *instance;
+	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	struct usb_host_endpoint *cmd_ep = usb_dev->ep_in[CXACRU_EP_CMD];
+	int ret;
+
+	/* instance init */
+	instance = kzalloc(sizeof(*instance), GFP_KERNEL);
+	if (!instance)
+		return -ENOMEM;
+
+	instance->usbatm = usbatm_instance;
+	instance->modem_type = (struct cxacru_modem_type *) id->driver_info;
+
+	mutex_init(&instance->poll_state_serialize);
+	instance->poll_state = CXPOLL_STOPPED;
+	instance->line_status = -1;
+	instance->adsl_status = -1;
+
+	mutex_init(&instance->adsl_state_serialize);
+
+	instance->rcv_buf = (u8 *) __get_free_page(GFP_KERNEL);
+	if (!instance->rcv_buf) {
+		usb_dbg(usbatm_instance, "cxacru_bind: no memory for rcv_buf\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+	instance->snd_buf = (u8 *) __get_free_page(GFP_KERNEL);
+	if (!instance->snd_buf) {
+		usb_dbg(usbatm_instance, "cxacru_bind: no memory for snd_buf\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+	instance->rcv_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!instance->rcv_urb) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+	instance->snd_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!instance->snd_urb) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	if (!cmd_ep) {
+		usb_dbg(usbatm_instance, "cxacru_bind: no command endpoint\n");
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	if ((cmd_ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+			== USB_ENDPOINT_XFER_INT) {
+		usb_fill_int_urb(instance->rcv_urb,
+			usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD),
+			instance->rcv_buf, PAGE_SIZE,
+			cxacru_blocking_completion, &instance->rcv_done, 1);
+
+		usb_fill_int_urb(instance->snd_urb,
+			usb_dev, usb_sndintpipe(usb_dev, CXACRU_EP_CMD),
+			instance->snd_buf, PAGE_SIZE,
+			cxacru_blocking_completion, &instance->snd_done, 4);
+	} else {
+		usb_fill_bulk_urb(instance->rcv_urb,
+			usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD),
+			instance->rcv_buf, PAGE_SIZE,
+			cxacru_blocking_completion, &instance->rcv_done);
+
+		usb_fill_bulk_urb(instance->snd_urb,
+			usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD),
+			instance->snd_buf, PAGE_SIZE,
+			cxacru_blocking_completion, &instance->snd_done);
+	}
+
+	mutex_init(&instance->cm_serialize);
+
+	INIT_DELAYED_WORK(&instance->poll_work, cxacru_poll_status);
+
+	usbatm_instance->driver_data = instance;
+
+	usbatm_instance->flags = (cxacru_card_status(instance) ? 0 : UDSL_SKIP_HEAVY_INIT);
+
+	return 0;
+
+ fail:
+	free_page((unsigned long) instance->snd_buf);
+	free_page((unsigned long) instance->rcv_buf);
+	usb_free_urb(instance->snd_urb);
+	usb_free_urb(instance->rcv_urb);
+	kfree(instance);
+
+	return ret;
+}
+
+static void cxacru_unbind(struct usbatm_data *usbatm_instance,
+		struct usb_interface *intf)
+{
+	struct cxacru_data *instance = usbatm_instance->driver_data;
+	int is_polling = 1;
+
+	usb_dbg(usbatm_instance, "cxacru_unbind entered\n");
+
+	if (!instance) {
+		usb_dbg(usbatm_instance, "cxacru_unbind: NULL instance!\n");
+		return;
+	}
+
+	mutex_lock(&instance->poll_state_serialize);
+	BUG_ON(instance->poll_state == CXPOLL_SHUTDOWN);
+
+	/* ensure that status polling continues unless
+	 * it has already stopped */
+	if (instance->poll_state == CXPOLL_STOPPED)
+		is_polling = 0;
+
+	/* stop polling from being stopped or started */
+	instance->poll_state = CXPOLL_SHUTDOWN;
+	mutex_unlock(&instance->poll_state_serialize);
+
+	if (is_polling)
+		cancel_delayed_work_sync(&instance->poll_work);
+
+	usb_kill_urb(instance->snd_urb);
+	usb_kill_urb(instance->rcv_urb);
+	usb_free_urb(instance->snd_urb);
+	usb_free_urb(instance->rcv_urb);
+
+	free_page((unsigned long) instance->snd_buf);
+	free_page((unsigned long) instance->rcv_buf);
+
+	kfree(instance);
+
+	usbatm_instance->driver_data = NULL;
+}
+
+static const struct cxacru_modem_type cxacru_cafe = {
+	.pll_f_clk = 0x02d874df,
+	.pll_b_clk = 0x0196a51a,
+	.boot_rom_patch = 1,
+};
+
+static const struct cxacru_modem_type cxacru_cb00 = {
+	.pll_f_clk = 0x5,
+	.pll_b_clk = 0x3,
+	.boot_rom_patch = 0,
+};
+
+static const struct usb_device_id cxacru_usb_ids[] = {
+	{ /* V = Conexant			P = ADSL modem (Euphrates project)	*/
+		USB_DEVICE(0x0572, 0xcafe),	.driver_info = (unsigned long) &cxacru_cafe
+	},
+	{ /* V = Conexant			P = ADSL modem (Hasbani project)	*/
+		USB_DEVICE(0x0572, 0xcb00),	.driver_info = (unsigned long) &cxacru_cb00
+	},
+	{ /* V = Conexant			P = ADSL modem				*/
+		USB_DEVICE(0x0572, 0xcb01),	.driver_info = (unsigned long) &cxacru_cb00
+	},
+	{ /* V = Conexant			P = ADSL modem (Well PTI-800) */
+		USB_DEVICE(0x0572, 0xcb02),	.driver_info = (unsigned long) &cxacru_cb00
+	},
+	{ /* V = Conexant			P = ADSL modem				*/
+		USB_DEVICE(0x0572, 0xcb06),	.driver_info = (unsigned long) &cxacru_cb00
+	},
+	{ /* V = Conexant			P = ADSL modem (ZTE ZXDSL 852)		*/
+		USB_DEVICE(0x0572, 0xcb07),	.driver_info = (unsigned long) &cxacru_cb00
+	},
+	{ /* V = Olitec				P = ADSL modem version 2		*/
+		USB_DEVICE(0x08e3, 0x0100),	.driver_info = (unsigned long) &cxacru_cafe
+	},
+	{ /* V = Olitec				P = ADSL modem version 3		*/
+		USB_DEVICE(0x08e3, 0x0102),	.driver_info = (unsigned long) &cxacru_cb00
+	},
+	{ /* V = Trust/Amigo Technology Co.	P = AMX-CA86U				*/
+		USB_DEVICE(0x0eb0, 0x3457),	.driver_info = (unsigned long) &cxacru_cafe
+	},
+	{ /* V = Zoom				P = 5510				*/
+		USB_DEVICE(0x1803, 0x5510),	.driver_info = (unsigned long) &cxacru_cb00
+	},
+	{ /* V = Draytek			P = Vigor 318				*/
+		USB_DEVICE(0x0675, 0x0200),	.driver_info = (unsigned long) &cxacru_cb00
+	},
+	{ /* V = Zyxel				P = 630-C1 aka OMNI ADSL USB (Annex A)	*/
+		USB_DEVICE(0x0586, 0x330a),	.driver_info = (unsigned long) &cxacru_cb00
+	},
+	{ /* V = Zyxel				P = 630-C3 aka OMNI ADSL USB (Annex B)	*/
+		USB_DEVICE(0x0586, 0x330b),	.driver_info = (unsigned long) &cxacru_cb00
+	},
+	{ /* V = Aethra				P = Starmodem UM1020			*/
+		USB_DEVICE(0x0659, 0x0020),	.driver_info = (unsigned long) &cxacru_cb00
+	},
+	{ /* V = Aztech Systems			P = ? AKA Pirelli AUA-010		*/
+		USB_DEVICE(0x0509, 0x0812),	.driver_info = (unsigned long) &cxacru_cb00
+	},
+	{ /* V = Netopia			P = Cayman 3341(Annex A)/3351(Annex B)	*/
+		USB_DEVICE(0x100d, 0xcb01),	.driver_info = (unsigned long) &cxacru_cb00
+	},
+	{ /* V = Netopia			P = Cayman 3342(Annex A)/3352(Annex B)	*/
+		USB_DEVICE(0x100d, 0x3342),	.driver_info = (unsigned long) &cxacru_cb00
+	},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, cxacru_usb_ids);
+
+static struct usbatm_driver cxacru_driver = {
+	.driver_name	= cxacru_driver_name,
+	.bind		= cxacru_bind,
+	.heavy_init	= cxacru_heavy_init,
+	.unbind		= cxacru_unbind,
+	.atm_start	= cxacru_atm_start,
+	.bulk_in	= CXACRU_EP_DATA,
+	.bulk_out	= CXACRU_EP_DATA,
+	.rx_padding	= 3,
+	.tx_padding	= 11,
+};
+
+static int cxacru_usb_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	char buf[15];
+
+	/* Avoid ADSL routers (cx82310_eth).
+	 * Abort if bDeviceClass is 0xff and iProduct is "USB NET CARD".
+	 */
+	if (usb_dev->descriptor.bDeviceClass == USB_CLASS_VENDOR_SPEC
+			&& usb_string(usb_dev, usb_dev->descriptor.iProduct,
+				buf, sizeof(buf)) > 0) {
+		if (!strcmp(buf, "USB NET CARD")) {
+			dev_info(&intf->dev, "ignoring cx82310_eth device\n");
+			return -ENODEV;
+		}
+	}
+
+	return usbatm_usb_probe(intf, id, &cxacru_driver);
+}
+
+static struct usb_driver cxacru_usb_driver = {
+	.name		= cxacru_driver_name,
+	.probe		= cxacru_usb_probe,
+	.disconnect	= usbatm_usb_disconnect,
+	.id_table	= cxacru_usb_ids,
+	.dev_groups	= cxacru_groups,
+};
+
+module_usb_driver(cxacru_usb_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
new file mode 100644
index 000000000..973548b5c
--- /dev/null
+++ b/drivers/usb/atm/speedtch.c
@@ -0,0 +1,946 @@
+// SPDX-License-Identifier: GPL-2.0+
+/******************************************************************************
+ *  speedtch.c  -  Alcatel SpeedTouch USB xDSL modem driver
+ *
+ *  Copyright (C) 2001, Alcatel
+ *  Copyright (C) 2003, Duncan Sands
+ *  Copyright (C) 2004, David Woodhouse
+ *
+ *  Based on "modem_run.c", copyright (C) 2001, Benoit Papillault
+ ******************************************************************************/
+
+#include <asm/page.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/firmware.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/usb/ch9.h>
+#include <linux/workqueue.h>
+
+#include "usbatm.h"
+
+#define DRIVER_AUTHOR	"Johan Verrept, Duncan Sands <duncan.sands@free.fr>"
+#define DRIVER_DESC	"Alcatel SpeedTouch USB driver"
+
+static const char speedtch_driver_name[] = "speedtch";
+
+#define CTRL_TIMEOUT 2000	/* milliseconds */
+#define DATA_TIMEOUT 2000	/* milliseconds */
+
+#define OFFSET_7	0		/* size 1 */
+#define OFFSET_b	1		/* size 8 */
+#define OFFSET_d	9		/* size 4 */
+#define OFFSET_e	13		/* size 1 */
+#define OFFSET_f	14		/* size 1 */
+
+#define SIZE_7		1
+#define SIZE_b		8
+#define SIZE_d		4
+#define SIZE_e		1
+#define SIZE_f		1
+
+#define MIN_POLL_DELAY		5000	/* milliseconds */
+#define MAX_POLL_DELAY		60000	/* milliseconds */
+
+#define RESUBMIT_DELAY		1000	/* milliseconds */
+
+#define DEFAULT_BULK_ALTSETTING	1
+#define DEFAULT_ISOC_ALTSETTING	3
+#define DEFAULT_DL_512_FIRST	0
+#define DEFAULT_ENABLE_ISOC	0
+#define DEFAULT_SW_BUFFERING	0
+
+static unsigned int altsetting = 0; /* zero means: use the default */
+static bool dl_512_first = DEFAULT_DL_512_FIRST;
+static bool enable_isoc = DEFAULT_ENABLE_ISOC;
+static bool sw_buffering = DEFAULT_SW_BUFFERING;
+
+#define DEFAULT_B_MAX_DSL	8128
+#define DEFAULT_MODEM_MODE	11
+#define MODEM_OPTION_LENGTH	16
+static const unsigned char DEFAULT_MODEM_OPTION[MODEM_OPTION_LENGTH] = {
+	0x10, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+static unsigned int BMaxDSL = DEFAULT_B_MAX_DSL;
+static unsigned char ModemMode = DEFAULT_MODEM_MODE;
+static unsigned char ModemOption[MODEM_OPTION_LENGTH];
+static unsigned int num_ModemOption;
+
+module_param(altsetting, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(altsetting,
+		"Alternative setting for data interface (bulk_default: "
+		__MODULE_STRING(DEFAULT_BULK_ALTSETTING) "; isoc_default: "
+		__MODULE_STRING(DEFAULT_ISOC_ALTSETTING) ")");
+
+module_param(dl_512_first, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(dl_512_first,
+		 "Read 512 bytes before sending firmware (default: "
+		 __MODULE_STRING(DEFAULT_DL_512_FIRST) ")");
+
+module_param(enable_isoc, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(enable_isoc,
+		"Use isochronous transfers if available (default: "
+		__MODULE_STRING(DEFAULT_ENABLE_ISOC) ")");
+
+module_param(sw_buffering, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(sw_buffering,
+		 "Enable software buffering (default: "
+		 __MODULE_STRING(DEFAULT_SW_BUFFERING) ")");
+
+module_param(BMaxDSL, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(BMaxDSL,
+		"default: " __MODULE_STRING(DEFAULT_B_MAX_DSL));
+
+module_param(ModemMode, byte, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ModemMode,
+		"default: " __MODULE_STRING(DEFAULT_MODEM_MODE));
+
+module_param_array(ModemOption, byte, &num_ModemOption, S_IRUGO);
+MODULE_PARM_DESC(ModemOption, "default: 0x10,0x00,0x00,0x00,0x20");
+
+#define INTERFACE_DATA		1
+#define ENDPOINT_INT		0x81
+#define ENDPOINT_BULK_DATA	0x07
+#define ENDPOINT_ISOC_DATA	0x07
+#define ENDPOINT_FIRMWARE	0x05
+
+struct speedtch_params {
+	unsigned int altsetting;
+	unsigned int BMaxDSL;
+	unsigned char ModemMode;
+	unsigned char ModemOption[MODEM_OPTION_LENGTH];
+};
+
+struct speedtch_instance_data {
+	struct usbatm_data *usbatm;
+
+	struct speedtch_params params; /* set in probe, constant afterwards */
+
+	struct timer_list status_check_timer;
+	struct work_struct status_check_work;
+
+	unsigned char last_status;
+
+	int poll_delay; /* milliseconds */
+
+	struct timer_list resubmit_timer;
+	struct urb *int_urb;
+	unsigned char int_data[16];
+
+	unsigned char scratch_buffer[16];
+};
+
+/***************
+**  firmware  **
+***************/
+
+static void speedtch_set_swbuff(struct speedtch_instance_data *instance, int state)
+{
+	struct usbatm_data *usbatm = instance->usbatm;
+	struct usb_device *usb_dev = usbatm->usb_dev;
+	int ret;
+
+	ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+			      0x32, 0x40, state ? 0x01 : 0x00, 0x00, NULL, 0, CTRL_TIMEOUT);
+	if (ret < 0)
+		usb_warn(usbatm,
+			 "%sabling SW buffering: usb_control_msg returned %d\n",
+			 state ? "En" : "Dis", ret);
+	else
+		usb_dbg(usbatm, "speedtch_set_swbuff: %sbled SW buffering\n", state ? "En" : "Dis");
+}
+
+static void speedtch_test_sequence(struct speedtch_instance_data *instance)
+{
+	struct usbatm_data *usbatm = instance->usbatm;
+	struct usb_device *usb_dev = usbatm->usb_dev;
+	unsigned char *buf = instance->scratch_buffer;
+	int ret;
+
+	/* URB 147 */
+	buf[0] = 0x1c;
+	buf[1] = 0x50;
+	ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+			      0x01, 0x40, 0x0b, 0x00, buf, 2, CTRL_TIMEOUT);
+	if (ret < 0)
+		usb_warn(usbatm, "%s failed on URB147: %d\n", __func__, ret);
+
+	/* URB 148 */
+	buf[0] = 0x32;
+	buf[1] = 0x00;
+	ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+			      0x01, 0x40, 0x02, 0x00, buf, 2, CTRL_TIMEOUT);
+	if (ret < 0)
+		usb_warn(usbatm, "%s failed on URB148: %d\n", __func__, ret);
+
+	/* URB 149 */
+	buf[0] = 0x01;
+	buf[1] = 0x00;
+	buf[2] = 0x01;
+	ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+			      0x01, 0x40, 0x03, 0x00, buf, 3, CTRL_TIMEOUT);
+	if (ret < 0)
+		usb_warn(usbatm, "%s failed on URB149: %d\n", __func__, ret);
+
+	/* URB 150 */
+	buf[0] = 0x01;
+	buf[1] = 0x00;
+	buf[2] = 0x01;
+	ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+			      0x01, 0x40, 0x04, 0x00, buf, 3, CTRL_TIMEOUT);
+	if (ret < 0)
+		usb_warn(usbatm, "%s failed on URB150: %d\n", __func__, ret);
+
+	/* Extra initialisation in recent drivers - gives higher speeds */
+
+	/* URBext1 */
+	buf[0] = instance->params.ModemMode;
+	ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+			      0x01, 0x40, 0x11, 0x00, buf, 1, CTRL_TIMEOUT);
+	if (ret < 0)
+		usb_warn(usbatm, "%s failed on URBext1: %d\n", __func__, ret);
+
+	/* URBext2 */
+	/* This seems to be the one which actually triggers the higher sync
+	   rate -- it does require the new firmware too, although it works OK
+	   with older firmware */
+	ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+			      0x01, 0x40, 0x14, 0x00,
+			      instance->params.ModemOption,
+			      MODEM_OPTION_LENGTH, CTRL_TIMEOUT);
+	if (ret < 0)
+		usb_warn(usbatm, "%s failed on URBext2: %d\n", __func__, ret);
+
+	/* URBext3 */
+	buf[0] = instance->params.BMaxDSL & 0xff;
+	buf[1] = instance->params.BMaxDSL >> 8;
+	ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+			      0x01, 0x40, 0x12, 0x00, buf, 2, CTRL_TIMEOUT);
+	if (ret < 0)
+		usb_warn(usbatm, "%s failed on URBext3: %d\n", __func__, ret);
+}
+
+static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
+				     const struct firmware *fw1,
+				     const struct firmware *fw2)
+{
+	unsigned char *buffer;
+	struct usbatm_data *usbatm = instance->usbatm;
+	struct usb_device *usb_dev = usbatm->usb_dev;
+	int actual_length;
+	int ret = 0;
+	int offset;
+
+	usb_dbg(usbatm, "%s entered\n", __func__);
+
+	buffer = (unsigned char *)__get_free_page(GFP_KERNEL);
+	if (!buffer) {
+		ret = -ENOMEM;
+		usb_dbg(usbatm, "%s: no memory for buffer!\n", __func__);
+		goto out;
+	}
+
+	if (!usb_ifnum_to_if(usb_dev, 2)) {
+		ret = -ENODEV;
+		usb_dbg(usbatm, "%s: interface not found!\n", __func__);
+		goto out_free;
+	}
+
+	/* URB 7 */
+	if (dl_512_first) {	/* some modems need a read before writing the firmware */
+		ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
+				   buffer, 0x200, &actual_length, 2000);
+
+		if (ret < 0 && ret != -ETIMEDOUT)
+			usb_warn(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret);
+		else
+			usb_dbg(usbatm, "%s: BLOCK0 downloaded (%d bytes)\n", __func__, ret);
+	}
+
+	/* URB 8 : both leds are static green */
+	for (offset = 0; offset < fw1->size; offset += PAGE_SIZE) {
+		int thislen = min_t(int, PAGE_SIZE, fw1->size - offset);
+		memcpy(buffer, fw1->data + offset, thislen);
+
+		ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
+				   buffer, thislen, &actual_length, DATA_TIMEOUT);
+
+		if (ret < 0) {
+			usb_err(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret);
+			goto out_free;
+		}
+		usb_dbg(usbatm, "%s: BLOCK1 uploaded (%zu bytes)\n", __func__, fw1->size);
+	}
+
+	/* USB led blinking green, ADSL led off */
+
+	/* URB 11 */
+	ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
+			   buffer, 0x200, &actual_length, DATA_TIMEOUT);
+
+	if (ret < 0) {
+		usb_err(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret);
+		goto out_free;
+	}
+	usb_dbg(usbatm, "%s: BLOCK2 downloaded (%d bytes)\n", __func__, actual_length);
+
+	/* URBs 12 to 139 - USB led blinking green, ADSL led off */
+	for (offset = 0; offset < fw2->size; offset += PAGE_SIZE) {
+		int thislen = min_t(int, PAGE_SIZE, fw2->size - offset);
+		memcpy(buffer, fw2->data + offset, thislen);
+
+		ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
+				   buffer, thislen, &actual_length, DATA_TIMEOUT);
+
+		if (ret < 0) {
+			usb_err(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret);
+			goto out_free;
+		}
+	}
+	usb_dbg(usbatm, "%s: BLOCK3 uploaded (%zu bytes)\n", __func__, fw2->size);
+
+	/* USB led static green, ADSL led static red */
+
+	/* URB 142 */
+	ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
+			   buffer, 0x200, &actual_length, DATA_TIMEOUT);
+
+	if (ret < 0) {
+		usb_err(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret);
+		goto out_free;
+	}
+
+	/* success */
+	usb_dbg(usbatm, "%s: BLOCK4 downloaded (%d bytes)\n", __func__, actual_length);
+
+	/* Delay to allow firmware to start up. We can do this here
+	   because we're in our own kernel thread anyway. */
+	msleep_interruptible(1000);
+
+	if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->params.altsetting)) < 0) {
+		usb_err(usbatm, "%s: setting interface to %d failed (%d)!\n", __func__, instance->params.altsetting, ret);
+		goto out_free;
+	}
+
+	/* Enable software buffering, if requested */
+	if (sw_buffering)
+		speedtch_set_swbuff(instance, 1);
+
+	/* Magic spell; don't ask us what this does */
+	speedtch_test_sequence(instance);
+
+	ret = 0;
+
+out_free:
+	free_page((unsigned long)buffer);
+out:
+	return ret;
+}
+
+static int speedtch_find_firmware(struct usbatm_data *usbatm, struct usb_interface *intf,
+				  int phase, const struct firmware **fw_p)
+{
+	struct device *dev = &intf->dev;
+	const u16 bcdDevice = le16_to_cpu(interface_to_usbdev(intf)->descriptor.bcdDevice);
+	const u8 major_revision = bcdDevice >> 8;
+	const u8 minor_revision = bcdDevice & 0xff;
+	char buf[24];
+
+	sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision);
+	usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
+
+	if (request_firmware(fw_p, buf, dev)) {
+		sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision);
+		usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
+
+		if (request_firmware(fw_p, buf, dev)) {
+			sprintf(buf, "speedtch-%d.bin", phase);
+			usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
+
+			if (request_firmware(fw_p, buf, dev)) {
+				usb_err(usbatm, "%s: no stage %d firmware found!\n", __func__, phase);
+				return -ENOENT;
+			}
+		}
+	}
+
+	usb_info(usbatm, "found stage %d firmware %s\n", phase, buf);
+
+	return 0;
+}
+
+static int speedtch_heavy_init(struct usbatm_data *usbatm, struct usb_interface *intf)
+{
+	const struct firmware *fw1, *fw2;
+	struct speedtch_instance_data *instance = usbatm->driver_data;
+	int ret;
+
+	if ((ret = speedtch_find_firmware(usbatm, intf, 1, &fw1)) < 0)
+		return ret;
+
+	if ((ret = speedtch_find_firmware(usbatm, intf, 2, &fw2)) < 0) {
+		release_firmware(fw1);
+		return ret;
+	}
+
+	if ((ret = speedtch_upload_firmware(instance, fw1, fw2)) < 0)
+		usb_err(usbatm, "%s: firmware upload failed (%d)!\n", __func__, ret);
+
+	release_firmware(fw2);
+	release_firmware(fw1);
+
+	return ret;
+}
+
+
+/**********
+**  ATM  **
+**********/
+
+static int speedtch_read_status(struct speedtch_instance_data *instance)
+{
+	struct usbatm_data *usbatm = instance->usbatm;
+	struct usb_device *usb_dev = usbatm->usb_dev;
+	unsigned char *buf = instance->scratch_buffer;
+	int ret;
+
+	memset(buf, 0, 16);
+
+	ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+			      0x12, 0xc0, 0x07, 0x00, buf + OFFSET_7, SIZE_7,
+			      CTRL_TIMEOUT);
+	if (ret < 0) {
+		atm_dbg(usbatm, "%s: MSG 7 failed\n", __func__);
+		return ret;
+	}
+
+	ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+			      0x12, 0xc0, 0x0b, 0x00, buf + OFFSET_b, SIZE_b,
+			      CTRL_TIMEOUT);
+	if (ret < 0) {
+		atm_dbg(usbatm, "%s: MSG B failed\n", __func__);
+		return ret;
+	}
+
+	ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+			      0x12, 0xc0, 0x0d, 0x00, buf + OFFSET_d, SIZE_d,
+			      CTRL_TIMEOUT);
+	if (ret < 0) {
+		atm_dbg(usbatm, "%s: MSG D failed\n", __func__);
+		return ret;
+	}
+
+	ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+			      0x01, 0xc0, 0x0e, 0x00, buf + OFFSET_e, SIZE_e,
+			      CTRL_TIMEOUT);
+	if (ret < 0) {
+		atm_dbg(usbatm, "%s: MSG E failed\n", __func__);
+		return ret;
+	}
+
+	ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+			      0x01, 0xc0, 0x0f, 0x00, buf + OFFSET_f, SIZE_f,
+			      CTRL_TIMEOUT);
+	if (ret < 0) {
+		atm_dbg(usbatm, "%s: MSG F failed\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int speedtch_start_synchro(struct speedtch_instance_data *instance)
+{
+	struct usbatm_data *usbatm = instance->usbatm;
+	struct usb_device *usb_dev = usbatm->usb_dev;
+	unsigned char *buf = instance->scratch_buffer;
+	int ret;
+
+	atm_dbg(usbatm, "%s entered\n", __func__);
+
+	memset(buf, 0, 2);
+
+	ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+			      0x12, 0xc0, 0x04, 0x00,
+			      buf, 2, CTRL_TIMEOUT);
+
+	if (ret < 0)
+		atm_warn(usbatm, "failed to start ADSL synchronisation: %d\n", ret);
+	else
+		atm_dbg(usbatm, "%s: modem prodded. %d bytes returned: %02x %02x\n",
+			__func__, ret, buf[0], buf[1]);
+
+	return ret;
+}
+
+static void speedtch_check_status(struct work_struct *work)
+{
+	struct speedtch_instance_data *instance =
+		container_of(work, struct speedtch_instance_data,
+			     status_check_work);
+	struct usbatm_data *usbatm = instance->usbatm;
+	struct atm_dev *atm_dev = usbatm->atm_dev;
+	unsigned char *buf = instance->scratch_buffer;
+	int down_speed, up_speed, ret;
+	unsigned char status;
+
+#ifdef VERBOSE_DEBUG
+	atm_dbg(usbatm, "%s entered\n", __func__);
+#endif
+
+	ret = speedtch_read_status(instance);
+	if (ret < 0) {
+		atm_warn(usbatm, "error %d fetching device status\n", ret);
+		instance->poll_delay = min(2 * instance->poll_delay, MAX_POLL_DELAY);
+		return;
+	}
+
+	instance->poll_delay = max(instance->poll_delay / 2, MIN_POLL_DELAY);
+
+	status = buf[OFFSET_7];
+
+	if ((status != instance->last_status) || !status) {
+		atm_dbg(usbatm, "%s: line state 0x%02x\n", __func__, status);
+
+		switch (status) {
+		case 0:
+			atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
+			if (instance->last_status)
+				atm_info(usbatm, "ADSL line is down\n");
+			/* It may never resync again unless we ask it to... */
+			ret = speedtch_start_synchro(instance);
+			break;
+
+		case 0x08:
+			atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN);
+			atm_info(usbatm, "ADSL line is blocked?\n");
+			break;
+
+		case 0x10:
+			atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
+			atm_info(usbatm, "ADSL line is synchronising\n");
+			break;
+
+		case 0x20:
+			down_speed = buf[OFFSET_b] | (buf[OFFSET_b + 1] << 8)
+				| (buf[OFFSET_b + 2] << 16) | (buf[OFFSET_b + 3] << 24);
+			up_speed = buf[OFFSET_b + 4] | (buf[OFFSET_b + 5] << 8)
+				| (buf[OFFSET_b + 6] << 16) | (buf[OFFSET_b + 7] << 24);
+
+			if (!(down_speed & 0x0000ffff) && !(up_speed & 0x0000ffff)) {
+				down_speed >>= 16;
+				up_speed >>= 16;
+			}
+
+			atm_dev->link_rate = down_speed * 1000 / 424;
+			atm_dev_signal_change(atm_dev, ATM_PHY_SIG_FOUND);
+
+			atm_info(usbatm,
+				 "ADSL line is up (%d kb/s down | %d kb/s up)\n",
+				 down_speed, up_speed);
+			break;
+
+		default:
+			atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN);
+			atm_info(usbatm, "unknown line state %02x\n", status);
+			break;
+		}
+
+		instance->last_status = status;
+	}
+}
+
+static void speedtch_status_poll(struct timer_list *t)
+{
+	struct speedtch_instance_data *instance = from_timer(instance, t,
+						             status_check_timer);
+
+	schedule_work(&instance->status_check_work);
+
+	/* The following check is racy, but the race is harmless */
+	if (instance->poll_delay < MAX_POLL_DELAY)
+		mod_timer(&instance->status_check_timer, jiffies + msecs_to_jiffies(instance->poll_delay));
+	else
+		atm_warn(instance->usbatm, "Too many failures - disabling line status polling\n");
+}
+
+static void speedtch_resubmit_int(struct timer_list *t)
+{
+	struct speedtch_instance_data *instance = from_timer(instance, t,
+							     resubmit_timer);
+	struct urb *int_urb = instance->int_urb;
+	int ret;
+
+	atm_dbg(instance->usbatm, "%s entered\n", __func__);
+
+	if (int_urb) {
+		ret = usb_submit_urb(int_urb, GFP_ATOMIC);
+		if (!ret)
+			schedule_work(&instance->status_check_work);
+		else {
+			atm_dbg(instance->usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
+			mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY));
+		}
+	}
+}
+
+static void speedtch_handle_int(struct urb *int_urb)
+{
+	struct speedtch_instance_data *instance = int_urb->context;
+	struct usbatm_data *usbatm = instance->usbatm;
+	unsigned int count = int_urb->actual_length;
+	int status = int_urb->status;
+	int ret;
+
+	/* The magic interrupt for "up state" */
+	static const unsigned char up_int[6]   = { 0xa1, 0x00, 0x01, 0x00, 0x00, 0x00 };
+	/* The magic interrupt for "down state" */
+	static const unsigned char down_int[6] = { 0xa1, 0x00, 0x00, 0x00, 0x00, 0x00 };
+
+	atm_dbg(usbatm, "%s entered\n", __func__);
+
+	if (status < 0) {
+		atm_dbg(usbatm, "%s: nonzero urb status %d!\n", __func__, status);
+		goto fail;
+	}
+
+	if ((count == 6) && !memcmp(up_int, instance->int_data, 6)) {
+		del_timer(&instance->status_check_timer);
+		atm_info(usbatm, "DSL line goes up\n");
+	} else if ((count == 6) && !memcmp(down_int, instance->int_data, 6)) {
+		atm_info(usbatm, "DSL line goes down\n");
+	} else {
+		int i;
+
+		atm_dbg(usbatm, "%s: unknown interrupt packet of length %d:", __func__, count);
+		for (i = 0; i < count; i++)
+			printk(" %02x", instance->int_data[i]);
+		printk("\n");
+		goto fail;
+	}
+
+	int_urb = instance->int_urb;
+	if (int_urb) {
+		ret = usb_submit_urb(int_urb, GFP_ATOMIC);
+		schedule_work(&instance->status_check_work);
+		if (ret < 0) {
+			atm_dbg(usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
+			goto fail;
+		}
+	}
+
+	return;
+
+fail:
+	int_urb = instance->int_urb;
+	if (int_urb)
+		mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY));
+}
+
+static int speedtch_atm_start(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
+{
+	struct usb_device *usb_dev = usbatm->usb_dev;
+	struct speedtch_instance_data *instance = usbatm->driver_data;
+	int i, ret;
+	unsigned char mac_str[13];
+
+	atm_dbg(usbatm, "%s entered\n", __func__);
+
+	/* Set MAC address, it is stored in the serial number */
+	memset(atm_dev->esi, 0, sizeof(atm_dev->esi));
+	if (usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) {
+		for (i = 0; i < 6; i++)
+			atm_dev->esi[i] = (hex_to_bin(mac_str[i * 2]) << 4) +
+				hex_to_bin(mac_str[i * 2 + 1]);
+	}
+
+	/* Start modem synchronisation */
+	ret = speedtch_start_synchro(instance);
+
+	/* Set up interrupt endpoint */
+	if (instance->int_urb) {
+		ret = usb_submit_urb(instance->int_urb, GFP_KERNEL);
+		if (ret < 0) {
+			/* Doesn't matter; we'll poll anyway */
+			atm_dbg(usbatm, "%s: submission of interrupt URB failed (%d)!\n", __func__, ret);
+			usb_free_urb(instance->int_urb);
+			instance->int_urb = NULL;
+		}
+	}
+
+	/* Start status polling */
+	mod_timer(&instance->status_check_timer, jiffies + msecs_to_jiffies(1000));
+
+	return 0;
+}
+
+static void speedtch_atm_stop(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
+{
+	struct speedtch_instance_data *instance = usbatm->driver_data;
+	struct urb *int_urb = instance->int_urb;
+
+	atm_dbg(usbatm, "%s entered\n", __func__);
+
+	del_timer_sync(&instance->status_check_timer);
+
+	/*
+	 * Since resubmit_timer and int_urb can schedule themselves and
+	 * each other, shutting them down correctly takes some care
+	 */
+	instance->int_urb = NULL; /* signal shutdown */
+	mb();
+	usb_kill_urb(int_urb);
+	del_timer_sync(&instance->resubmit_timer);
+	/*
+	 * At this point, speedtch_handle_int and speedtch_resubmit_int
+	 * can run or be running, but instance->int_urb == NULL means that
+	 * they will not reschedule
+	 */
+	usb_kill_urb(int_urb);
+	del_timer_sync(&instance->resubmit_timer);
+	usb_free_urb(int_urb);
+
+	flush_work(&instance->status_check_work);
+}
+
+static int speedtch_pre_reset(struct usb_interface *intf)
+{
+	return 0;
+}
+
+static int speedtch_post_reset(struct usb_interface *intf)
+{
+	return 0;
+}
+
+
+/**********
+**  USB  **
+**********/
+
+static const struct usb_device_id speedtch_usb_ids[] = {
+	{USB_DEVICE(0x06b9, 0x4061)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, speedtch_usb_ids);
+
+static int speedtch_usb_probe(struct usb_interface *, const struct usb_device_id *);
+
+static struct usb_driver speedtch_usb_driver = {
+	.name		= speedtch_driver_name,
+	.probe		= speedtch_usb_probe,
+	.disconnect	= usbatm_usb_disconnect,
+	.pre_reset	= speedtch_pre_reset,
+	.post_reset	= speedtch_post_reset,
+	.id_table	= speedtch_usb_ids
+};
+
+static void speedtch_release_interfaces(struct usb_device *usb_dev,
+					int num_interfaces)
+{
+	struct usb_interface *cur_intf;
+	int i;
+
+	for (i = 0; i < num_interfaces; i++) {
+		cur_intf = usb_ifnum_to_if(usb_dev, i);
+		if (cur_intf) {
+			usb_set_intfdata(cur_intf, NULL);
+			usb_driver_release_interface(&speedtch_usb_driver, cur_intf);
+		}
+	}
+}
+
+static int speedtch_bind(struct usbatm_data *usbatm,
+			 struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	struct usb_interface *cur_intf, *data_intf;
+	struct speedtch_instance_data *instance;
+	int ifnum = intf->altsetting->desc.bInterfaceNumber;
+	int num_interfaces = usb_dev->actconfig->desc.bNumInterfaces;
+	int i, ret;
+	int use_isoc;
+
+	usb_dbg(usbatm, "%s entered\n", __func__);
+
+	/* sanity checks */
+
+	if (usb_dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) {
+		usb_err(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass);
+		return -ENODEV;
+	}
+
+	data_intf = usb_ifnum_to_if(usb_dev, INTERFACE_DATA);
+	if (!data_intf) {
+		usb_err(usbatm, "%s: data interface not found!\n", __func__);
+		return -ENODEV;
+	}
+
+	/* claim all interfaces */
+
+	for (i = 0; i < num_interfaces; i++) {
+		cur_intf = usb_ifnum_to_if(usb_dev, i);
+
+		if ((i != ifnum) && cur_intf) {
+			ret = usb_driver_claim_interface(&speedtch_usb_driver, cur_intf, usbatm);
+
+			if (ret < 0) {
+				usb_err(usbatm, "%s: failed to claim interface %2d (%d)!\n", __func__, i, ret);
+				speedtch_release_interfaces(usb_dev, i);
+				return ret;
+			}
+		}
+	}
+
+	instance = kzalloc(sizeof(*instance), GFP_KERNEL);
+
+	if (!instance) {
+		ret = -ENOMEM;
+		goto fail_release;
+	}
+
+	instance->usbatm = usbatm;
+
+	/* module parameters may change at any moment, so take a snapshot */
+	instance->params.altsetting = altsetting;
+	instance->params.BMaxDSL = BMaxDSL;
+	instance->params.ModemMode = ModemMode;
+	memcpy(instance->params.ModemOption, DEFAULT_MODEM_OPTION, MODEM_OPTION_LENGTH);
+	memcpy(instance->params.ModemOption, ModemOption, num_ModemOption);
+	use_isoc = enable_isoc;
+
+	if (instance->params.altsetting)
+		if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->params.altsetting)) < 0) {
+			usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, instance->params.altsetting, ret);
+			instance->params.altsetting = 0; /* fall back to default */
+		}
+
+	if (!instance->params.altsetting && use_isoc)
+		if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_ISOC_ALTSETTING)) < 0) {
+			usb_dbg(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_ISOC_ALTSETTING, ret);
+			use_isoc = 0; /* fall back to bulk */
+		}
+
+	if (use_isoc) {
+		const struct usb_host_interface *desc = data_intf->cur_altsetting;
+		const __u8 target_address = USB_DIR_IN | usbatm->driver->isoc_in;
+
+		use_isoc = 0; /* fall back to bulk if endpoint not found */
+
+		for (i = 0; i < desc->desc.bNumEndpoints; i++) {
+			const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc;
+
+			if ((endpoint_desc->bEndpointAddress == target_address)) {
+				use_isoc =
+					usb_endpoint_xfer_isoc(endpoint_desc);
+				break;
+			}
+		}
+
+		if (!use_isoc)
+			usb_info(usbatm, "isochronous transfer not supported - using bulk\n");
+	}
+
+	if (!use_isoc && !instance->params.altsetting)
+		if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_BULK_ALTSETTING)) < 0) {
+			usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_BULK_ALTSETTING, ret);
+			goto fail_free;
+		}
+
+	if (!instance->params.altsetting)
+		instance->params.altsetting = use_isoc ? DEFAULT_ISOC_ALTSETTING : DEFAULT_BULK_ALTSETTING;
+
+	usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0);
+
+	INIT_WORK(&instance->status_check_work, speedtch_check_status);
+	timer_setup(&instance->status_check_timer, speedtch_status_poll, 0);
+	instance->last_status = 0xff;
+	instance->poll_delay = MIN_POLL_DELAY;
+
+	timer_setup(&instance->resubmit_timer, speedtch_resubmit_int, 0);
+
+	instance->int_urb = usb_alloc_urb(0, GFP_KERNEL);
+
+	if (instance->int_urb)
+		usb_fill_int_urb(instance->int_urb, usb_dev,
+				 usb_rcvintpipe(usb_dev, ENDPOINT_INT),
+				 instance->int_data, sizeof(instance->int_data),
+				 speedtch_handle_int, instance, 16);
+	else
+		usb_dbg(usbatm, "%s: no memory for interrupt urb!\n", __func__);
+
+	/* check whether the modem already seems to be alive */
+	ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+			      0x12, 0xc0, 0x07, 0x00,
+			      instance->scratch_buffer + OFFSET_7, SIZE_7, 500);
+
+	usbatm->flags |= (ret == SIZE_7 ? UDSL_SKIP_HEAVY_INIT : 0);
+
+	usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, usbatm->flags & UDSL_SKIP_HEAVY_INIT ? "already" : "not");
+
+	if (!(usbatm->flags & UDSL_SKIP_HEAVY_INIT))
+		if ((ret = usb_reset_device(usb_dev)) < 0) {
+			usb_err(usbatm, "%s: device reset failed (%d)!\n", __func__, ret);
+			goto fail_free;
+		}
+
+        usbatm->driver_data = instance;
+
+	return 0;
+
+fail_free:
+	usb_free_urb(instance->int_urb);
+	kfree(instance);
+fail_release:
+	speedtch_release_interfaces(usb_dev, num_interfaces);
+	return ret;
+}
+
+static void speedtch_unbind(struct usbatm_data *usbatm, struct usb_interface *intf)
+{
+	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	struct speedtch_instance_data *instance = usbatm->driver_data;
+
+	usb_dbg(usbatm, "%s entered\n", __func__);
+
+	speedtch_release_interfaces(usb_dev, usb_dev->actconfig->desc.bNumInterfaces);
+	usb_free_urb(instance->int_urb);
+	kfree(instance);
+}
+
+
+/***********
+**  init  **
+***********/
+
+static struct usbatm_driver speedtch_usbatm_driver = {
+	.driver_name	= speedtch_driver_name,
+	.bind		= speedtch_bind,
+	.heavy_init	= speedtch_heavy_init,
+	.unbind		= speedtch_unbind,
+	.atm_start	= speedtch_atm_start,
+	.atm_stop	= speedtch_atm_stop,
+	.bulk_in	= ENDPOINT_BULK_DATA,
+	.bulk_out	= ENDPOINT_BULK_DATA,
+	.isoc_in	= ENDPOINT_ISOC_DATA
+};
+
+static int speedtch_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	return usbatm_usb_probe(intf, id, &speedtch_usbatm_driver);
+}
+
+module_usb_driver(speedtch_usb_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
new file mode 100644
index 000000000..5812f7ea7
--- /dev/null
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -0,0 +1,2755 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+/*
+ * Copyright (c) 2003, 2004
+ *	Damien Bergamini <damien.bergamini@free.fr>. All rights reserved.
+ *
+ * Copyright (c) 2005-2007 Matthieu Castet <castet.matthieu@free.fr>
+ * Copyright (c) 2005-2007 Stanislaw Gruszka <stf_xl@wp.pl>
+ *
+ * HISTORY : some part of the code was base on ueagle 1.3 BSD driver,
+ * Damien Bergamini agree to put his code under a DUAL GPL/BSD license.
+ *
+ * The rest of the code was rewritten from scratch.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/crc32.h>
+#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/ctype.h>
+#include <linux/sched.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/freezer.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+
+#include <asm/unaligned.h>
+
+#include "usbatm.h"
+
+#define EAGLEUSBVERSION "ueagle 1.4"
+
+
+/*
+ * Debug macros
+ */
+#define uea_dbg(usb_dev, format, args...)	\
+	do { \
+		if (debug >= 1) \
+			dev_dbg(&(usb_dev)->dev, \
+				"[ueagle-atm dbg] %s: " format, \
+					__func__, ##args); \
+	} while (0)
+
+#define uea_vdbg(usb_dev, format, args...)	\
+	do { \
+		if (debug >= 2) \
+			dev_dbg(&(usb_dev)->dev, \
+				"[ueagle-atm vdbg]  " format, ##args); \
+	} while (0)
+
+#define uea_enters(usb_dev) \
+	uea_vdbg(usb_dev, "entering %s\n" , __func__)
+
+#define uea_leaves(usb_dev) \
+	uea_vdbg(usb_dev, "leaving  %s\n" , __func__)
+
+#define uea_err(usb_dev, format, args...) \
+	dev_err(&(usb_dev)->dev , "[UEAGLE-ATM] " format , ##args)
+
+#define uea_warn(usb_dev, format, args...) \
+	dev_warn(&(usb_dev)->dev , "[Ueagle-atm] " format, ##args)
+
+#define uea_info(usb_dev, format, args...) \
+	dev_info(&(usb_dev)->dev , "[ueagle-atm] " format, ##args)
+
+struct intr_pkt;
+
+/* cmv's from firmware */
+struct uea_cmvs_v1 {
+	u32 address;
+	u16 offset;
+	u32 data;
+} __packed;
+
+struct uea_cmvs_v2 {
+	u32 group;
+	u32 address;
+	u32 offset;
+	u32 data;
+} __packed;
+
+/* information about currently processed cmv */
+struct cmv_dsc_e1 {
+	u8 function;
+	u16 idx;
+	u32 address;
+	u16 offset;
+};
+
+struct cmv_dsc_e4 {
+	u16 function;
+	u16 offset;
+	u16 address;
+	u16 group;
+};
+
+union cmv_dsc {
+	struct cmv_dsc_e1 e1;
+	struct cmv_dsc_e4 e4;
+};
+
+struct uea_softc {
+	struct usb_device *usb_dev;
+	struct usbatm_data *usbatm;
+
+	int modem_index;
+	unsigned int driver_info;
+	int annex;
+#define ANNEXA 0
+#define ANNEXB 1
+
+	int booting;
+	int reset;
+
+	wait_queue_head_t sync_q;
+
+	struct task_struct *kthread;
+	u32 data;
+	u32 data1;
+
+	int cmv_ack;
+	union cmv_dsc cmv_dsc;
+
+	struct work_struct task;
+	u16 pageno;
+	u16 ovl;
+
+	const struct firmware *dsp_firm;
+	struct urb *urb_int;
+
+	void (*dispatch_cmv)(struct uea_softc *, struct intr_pkt *);
+	void (*schedule_load_page)(struct uea_softc *, struct intr_pkt *);
+	int (*stat)(struct uea_softc *);
+	int (*send_cmvs)(struct uea_softc *);
+
+	/* keep in sync with eaglectl */
+	struct uea_stats {
+		struct {
+			u32 state;
+			u32 flags;
+			u32 mflags;
+			u32 vidcpe;
+			u32 vidco;
+			u32 dsrate;
+			u32 usrate;
+			u32 dsunc;
+			u32 usunc;
+			u32 dscorr;
+			u32 uscorr;
+			u32 txflow;
+			u32 rxflow;
+			u32 usattenuation;
+			u32 dsattenuation;
+			u32 dsmargin;
+			u32 usmargin;
+			u32 firmid;
+		} phy;
+	} stats;
+};
+
+/*
+ * Elsa IDs
+ */
+#define ELSA_VID		0x05CC
+#define ELSA_PID_PSTFIRM	0x3350
+#define ELSA_PID_PREFIRM	0x3351
+
+#define ELSA_PID_A_PREFIRM	0x3352
+#define ELSA_PID_A_PSTFIRM	0x3353
+#define ELSA_PID_B_PREFIRM	0x3362
+#define ELSA_PID_B_PSTFIRM	0x3363
+
+/*
+ * Devolo IDs : pots if (pid & 0x10)
+ */
+#define DEVOLO_VID			0x1039
+#define DEVOLO_EAGLE_I_A_PID_PSTFIRM	0x2110
+#define DEVOLO_EAGLE_I_A_PID_PREFIRM	0x2111
+
+#define DEVOLO_EAGLE_I_B_PID_PSTFIRM	0x2100
+#define DEVOLO_EAGLE_I_B_PID_PREFIRM	0x2101
+
+#define DEVOLO_EAGLE_II_A_PID_PSTFIRM	0x2130
+#define DEVOLO_EAGLE_II_A_PID_PREFIRM	0x2131
+
+#define DEVOLO_EAGLE_II_B_PID_PSTFIRM	0x2120
+#define DEVOLO_EAGLE_II_B_PID_PREFIRM	0x2121
+
+/*
+ * Reference design USB IDs
+ */
+#define ANALOG_VID		0x1110
+#define ADI930_PID_PREFIRM	0x9001
+#define ADI930_PID_PSTFIRM	0x9000
+
+#define EAGLE_I_PID_PREFIRM	0x9010	/* Eagle I */
+#define EAGLE_I_PID_PSTFIRM	0x900F	/* Eagle I */
+
+#define EAGLE_IIC_PID_PREFIRM	0x9024	/* Eagle IIC */
+#define EAGLE_IIC_PID_PSTFIRM	0x9023	/* Eagle IIC */
+
+#define EAGLE_II_PID_PREFIRM	0x9022	/* Eagle II */
+#define EAGLE_II_PID_PSTFIRM	0x9021	/* Eagle II */
+
+#define EAGLE_III_PID_PREFIRM	0x9032	/* Eagle III */
+#define EAGLE_III_PID_PSTFIRM	0x9031	/* Eagle III */
+
+#define EAGLE_IV_PID_PREFIRM	0x9042  /* Eagle IV */
+#define EAGLE_IV_PID_PSTFIRM	0x9041  /* Eagle IV */
+
+/*
+ * USR USB IDs
+ */
+#define USR_VID			0x0BAF
+#define MILLER_A_PID_PREFIRM	0x00F2
+#define MILLER_A_PID_PSTFIRM	0x00F1
+#define MILLER_B_PID_PREFIRM	0x00FA
+#define MILLER_B_PID_PSTFIRM	0x00F9
+#define HEINEKEN_A_PID_PREFIRM	0x00F6
+#define HEINEKEN_A_PID_PSTFIRM	0x00F5
+#define HEINEKEN_B_PID_PREFIRM	0x00F8
+#define HEINEKEN_B_PID_PSTFIRM	0x00F7
+
+#define PREFIRM 0
+#define PSTFIRM (1<<7)
+#define AUTO_ANNEX_A (1<<8)
+#define AUTO_ANNEX_B (1<<9)
+
+enum {
+	ADI930 = 0,
+	EAGLE_I,
+	EAGLE_II,
+	EAGLE_III,
+	EAGLE_IV
+};
+
+/* macros for both struct usb_device_id and struct uea_softc */
+#define UEA_IS_PREFIRM(x) \
+	(!((x)->driver_info & PSTFIRM))
+#define UEA_CHIP_VERSION(x) \
+	((x)->driver_info & 0xf)
+
+#define IS_ISDN(x) \
+	((x)->annex & ANNEXB)
+
+#define INS_TO_USBDEV(ins) (ins->usb_dev)
+
+#define GET_STATUS(data) \
+	((data >> 8) & 0xf)
+
+#define IS_OPERATIONAL(sc) \
+	((UEA_CHIP_VERSION(sc) != EAGLE_IV) ? \
+	(GET_STATUS(sc->stats.phy.state) == 2) : \
+	(sc->stats.phy.state == 7))
+
+/*
+ * Set of macros to handle unaligned data in the firmware blob.
+ * The FW_GET_BYTE() macro is provided only for consistency.
+ */
+
+#define FW_GET_BYTE(p) (*((__u8 *) (p)))
+
+#define FW_DIR "ueagle-atm/"
+#define EAGLE_FIRMWARE FW_DIR "eagle.fw"
+#define ADI930_FIRMWARE FW_DIR "adi930.fw"
+#define EAGLE_I_FIRMWARE FW_DIR "eagleI.fw"
+#define EAGLE_II_FIRMWARE FW_DIR "eagleII.fw"
+#define EAGLE_III_FIRMWARE FW_DIR "eagleIII.fw"
+#define EAGLE_IV_FIRMWARE FW_DIR "eagleIV.fw"
+
+#define DSP4I_FIRMWARE FW_DIR "DSP4i.bin"
+#define DSP4P_FIRMWARE FW_DIR "DSP4p.bin"
+#define DSP9I_FIRMWARE FW_DIR "DSP9i.bin"
+#define DSP9P_FIRMWARE FW_DIR "DSP9p.bin"
+#define DSPEI_FIRMWARE FW_DIR "DSPei.bin"
+#define DSPEP_FIRMWARE FW_DIR "DSPep.bin"
+#define FPGA930_FIRMWARE FW_DIR "930-fpga.bin"
+
+#define CMV4P_FIRMWARE FW_DIR "CMV4p.bin"
+#define CMV4PV2_FIRMWARE FW_DIR "CMV4p.bin.v2"
+#define CMV4I_FIRMWARE FW_DIR "CMV4i.bin"
+#define CMV4IV2_FIRMWARE FW_DIR "CMV4i.bin.v2"
+#define CMV9P_FIRMWARE FW_DIR "CMV9p.bin"
+#define CMV9PV2_FIRMWARE FW_DIR "CMV9p.bin.v2"
+#define CMV9I_FIRMWARE FW_DIR "CMV9i.bin"
+#define CMV9IV2_FIRMWARE FW_DIR "CMV9i.bin.v2"
+#define CMVEP_FIRMWARE FW_DIR "CMVep.bin"
+#define CMVEPV2_FIRMWARE FW_DIR "CMVep.bin.v2"
+#define CMVEI_FIRMWARE FW_DIR "CMVei.bin"
+#define CMVEIV2_FIRMWARE FW_DIR "CMVei.bin.v2"
+
+#define UEA_FW_NAME_MAX 30
+#define NB_MODEM 4
+
+#define BULK_TIMEOUT 300
+#define CTRL_TIMEOUT 1000
+
+#define ACK_TIMEOUT msecs_to_jiffies(3000)
+
+#define UEA_INTR_IFACE_NO	0
+#define UEA_US_IFACE_NO		1
+#define UEA_DS_IFACE_NO		2
+
+#define FASTEST_ISO_INTF	8
+
+#define UEA_BULK_DATA_PIPE	0x02
+#define UEA_IDMA_PIPE		0x04
+#define UEA_INTR_PIPE		0x04
+#define UEA_ISO_DATA_PIPE	0x08
+
+#define UEA_E1_SET_BLOCK	0x0001
+#define UEA_E4_SET_BLOCK	0x002c
+#define UEA_SET_MODE		0x0003
+#define UEA_SET_2183_DATA	0x0004
+#define UEA_SET_TIMEOUT		0x0011
+
+#define UEA_LOOPBACK_OFF	0x0002
+#define UEA_LOOPBACK_ON		0x0003
+#define UEA_BOOT_IDMA		0x0006
+#define UEA_START_RESET		0x0007
+#define UEA_END_RESET		0x0008
+
+#define UEA_SWAP_MAILBOX	(0x3fcd | 0x4000)
+#define UEA_MPTX_START		(0x3fce | 0x4000)
+#define UEA_MPTX_MAILBOX	(0x3fd6 | 0x4000)
+#define UEA_MPRX_MAILBOX	(0x3fdf | 0x4000)
+
+/* block information in eagle4 dsp firmware  */
+struct block_index {
+	__le32 PageOffset;
+	__le32 NotLastBlock;
+	__le32 dummy;
+	__le32 PageSize;
+	__le32 PageAddress;
+	__le16 dummy1;
+	__le16 PageNumber;
+} __packed;
+
+#define E4_IS_BOOT_PAGE(PageSize) ((le32_to_cpu(PageSize)) & 0x80000000)
+#define E4_PAGE_BYTES(PageSize) ((le32_to_cpu(PageSize) & 0x7fffffff) * 4)
+
+#define E4_L1_STRING_HEADER 0x10
+#define E4_MAX_PAGE_NUMBER 0x58
+#define E4_NO_SWAPPAGE_HEADERS 0x31
+
+/* l1_code is eagle4 dsp firmware format */
+struct l1_code {
+	u8 string_header[E4_L1_STRING_HEADER];
+	u8 page_number_to_block_index[E4_MAX_PAGE_NUMBER];
+	struct block_index page_header[E4_NO_SWAPPAGE_HEADERS];
+	u8 code[];
+} __packed;
+
+/* structures describing a block within a DSP page */
+struct block_info_e1 {
+	__le16 wHdr;
+	__le16 wAddress;
+	__le16 wSize;
+	__le16 wOvlOffset;
+	__le16 wOvl;		/* overlay */
+	__le16 wLast;
+} __packed;
+#define E1_BLOCK_INFO_SIZE 12
+
+struct block_info_e4 {
+	__be16 wHdr;
+	__u8 bBootPage;
+	__u8 bPageNumber;
+	__be32 dwSize;
+	__be32 dwAddress;
+	__be16 wReserved;
+} __packed;
+#define E4_BLOCK_INFO_SIZE 14
+
+#define UEA_BIHDR 0xabcd
+#define UEA_RESERVED 0xffff
+
+/* constants describing cmv type */
+#define E1_PREAMBLE 0x535c
+#define E1_MODEMTOHOST 0x01
+#define E1_HOSTTOMODEM 0x10
+
+#define E1_MEMACCESS 0x1
+#define E1_ADSLDIRECTIVE 0x7
+#define E1_FUNCTION_TYPE(f) ((f) >> 4)
+#define E1_FUNCTION_SUBTYPE(f) ((f) & 0x0f)
+
+#define E4_MEMACCESS 0
+#define E4_ADSLDIRECTIVE 0xf
+#define E4_FUNCTION_TYPE(f) ((f) >> 8)
+#define E4_FUNCTION_SIZE(f) ((f) & 0x0f)
+#define E4_FUNCTION_SUBTYPE(f) (((f) >> 4) & 0x0f)
+
+/* for MEMACCESS */
+#define E1_REQUESTREAD	0x0
+#define E1_REQUESTWRITE	0x1
+#define E1_REPLYREAD	0x2
+#define E1_REPLYWRITE	0x3
+
+#define E4_REQUESTREAD	0x0
+#define E4_REQUESTWRITE	0x4
+#define E4_REPLYREAD	(E4_REQUESTREAD | 1)
+#define E4_REPLYWRITE	(E4_REQUESTWRITE | 1)
+
+/* for ADSLDIRECTIVE */
+#define E1_KERNELREADY 0x0
+#define E1_MODEMREADY  0x1
+
+#define E4_KERNELREADY 0x0
+#define E4_MODEMREADY  0x1
+
+#define E1_MAKEFUNCTION(t, s) (((t) & 0xf) << 4 | ((s) & 0xf))
+#define E4_MAKEFUNCTION(t, st, s) (((t) & 0xf) << 8 | \
+	((st) & 0xf) << 4 | ((s) & 0xf))
+
+#define E1_MAKESA(a, b, c, d)						\
+	(((c) & 0xff) << 24 |						\
+	 ((d) & 0xff) << 16 |						\
+	 ((a) & 0xff) << 8  |						\
+	 ((b) & 0xff))
+
+#define E1_GETSA1(a) ((a >> 8) & 0xff)
+#define E1_GETSA2(a) (a & 0xff)
+#define E1_GETSA3(a) ((a >> 24) & 0xff)
+#define E1_GETSA4(a) ((a >> 16) & 0xff)
+
+#define E1_SA_CNTL E1_MAKESA('C', 'N', 'T', 'L')
+#define E1_SA_DIAG E1_MAKESA('D', 'I', 'A', 'G')
+#define E1_SA_INFO E1_MAKESA('I', 'N', 'F', 'O')
+#define E1_SA_OPTN E1_MAKESA('O', 'P', 'T', 'N')
+#define E1_SA_RATE E1_MAKESA('R', 'A', 'T', 'E')
+#define E1_SA_STAT E1_MAKESA('S', 'T', 'A', 'T')
+
+#define E4_SA_CNTL 1
+#define E4_SA_STAT 2
+#define E4_SA_INFO 3
+#define E4_SA_TEST 4
+#define E4_SA_OPTN 5
+#define E4_SA_RATE 6
+#define E4_SA_DIAG 7
+#define E4_SA_CNFG 8
+
+/* structures representing a CMV (Configuration and Management Variable) */
+struct cmv_e1 {
+	__le16 wPreamble;
+	__u8 bDirection;
+	__u8 bFunction;
+	__le16 wIndex;
+	__le32 dwSymbolicAddress;
+	__le16 wOffsetAddress;
+	__le32 dwData;
+} __packed;
+
+struct cmv_e4 {
+	__be16 wGroup;
+	__be16 wFunction;
+	__be16 wOffset;
+	__be16 wAddress;
+	__be32 dwData[6];
+} __packed;
+
+/* structures representing swap information */
+struct swap_info_e1 {
+	__u8 bSwapPageNo;
+	__u8 bOvl;		/* overlay */
+} __packed;
+
+struct swap_info_e4 {
+	__u8 bSwapPageNo;
+} __packed;
+
+/* structures representing interrupt data */
+#define e1_bSwapPageNo	u.e1.s1.swapinfo.bSwapPageNo
+#define e1_bOvl		u.e1.s1.swapinfo.bOvl
+#define e4_bSwapPageNo  u.e4.s1.swapinfo.bSwapPageNo
+
+#define INT_LOADSWAPPAGE 0x0001
+#define INT_INCOMINGCMV  0x0002
+
+union intr_data_e1 {
+	struct {
+		struct swap_info_e1 swapinfo;
+		__le16 wDataSize;
+	} __packed s1;
+	struct {
+		struct cmv_e1 cmv;
+		__le16 wDataSize;
+	} __packed s2;
+} __packed;
+
+union intr_data_e4 {
+	struct {
+		struct swap_info_e4 swapinfo;
+		__le16 wDataSize;
+	} __packed s1;
+	struct {
+		struct cmv_e4 cmv;
+		__le16 wDataSize;
+	} __packed s2;
+} __packed;
+
+struct intr_pkt {
+	__u8 bType;
+	__u8 bNotification;
+	__le16 wValue;
+	__le16 wIndex;
+	__le16 wLength;
+	__le16 wInterrupt;
+	union {
+		union intr_data_e1 e1;
+		union intr_data_e4 e4;
+	} u;
+} __packed;
+
+#define E1_INTR_PKT_SIZE 28
+#define E4_INTR_PKT_SIZE 64
+
+static struct usb_driver uea_driver;
+static DEFINE_MUTEX(uea_mutex);
+static const char * const chip_name[] = {
+	"ADI930", "Eagle I", "Eagle II", "Eagle III", "Eagle IV"};
+
+static int modem_index;
+static unsigned int debug;
+static unsigned int altsetting[NB_MODEM] = {
+				[0 ... (NB_MODEM - 1)] = FASTEST_ISO_INTF};
+static bool sync_wait[NB_MODEM];
+static char *cmv_file[NB_MODEM];
+static int annex[NB_MODEM];
+
+module_param(debug, uint, 0644);
+MODULE_PARM_DESC(debug, "module debug level (0=off,1=on,2=verbose)");
+module_param_array(altsetting, uint, NULL, 0644);
+MODULE_PARM_DESC(altsetting, "alternate setting for incoming traffic: 0=bulk, "
+			     "1=isoc slowest, ... , 8=isoc fastest (default)");
+module_param_array(sync_wait, bool, NULL, 0644);
+MODULE_PARM_DESC(sync_wait, "wait the synchronisation before starting ATM");
+module_param_array(cmv_file, charp, NULL, 0644);
+MODULE_PARM_DESC(cmv_file,
+		"file name with configuration and management variables");
+module_param_array(annex, uint, NULL, 0644);
+MODULE_PARM_DESC(annex,
+		"manually set annex a/b (0=auto, 1=annex a, 2=annex b)");
+
+#define uea_wait(sc, cond, timeo) \
+({ \
+	int _r = wait_event_interruptible_timeout(sc->sync_q, \
+			(cond) || kthread_should_stop(), timeo); \
+	if (kthread_should_stop()) \
+		_r = -ENODEV; \
+	_r; \
+})
+
+#define UPDATE_ATM_STAT(type, val) \
+	do { \
+		if (sc->usbatm->atm_dev) \
+			sc->usbatm->atm_dev->type = val; \
+	} while (0)
+
+#define UPDATE_ATM_SIGNAL(val) \
+	do { \
+		if (sc->usbatm->atm_dev) \
+			atm_dev_signal_change(sc->usbatm->atm_dev, val); \
+	} while (0)
+
+
+/* Firmware loading */
+#define LOAD_INTERNAL     0xA0
+#define F8051_USBCS       0x7f92
+
+/*
+ * uea_send_modem_cmd - Send a command for pre-firmware devices.
+ */
+static int uea_send_modem_cmd(struct usb_device *usb,
+			      u16 addr, u16 size, const u8 *buff)
+{
+	int ret = -ENOMEM;
+	u8 *xfer_buff;
+
+	xfer_buff = kmemdup(buff, size, GFP_KERNEL);
+	if (xfer_buff) {
+		ret = usb_control_msg(usb,
+				      usb_sndctrlpipe(usb, 0),
+				      LOAD_INTERNAL,
+				      USB_DIR_OUT | USB_TYPE_VENDOR |
+				      USB_RECIP_DEVICE, addr, 0, xfer_buff,
+				      size, CTRL_TIMEOUT);
+		kfree(xfer_buff);
+	}
+
+	if (ret < 0)
+		return ret;
+
+	return (ret == size) ? 0 : -EIO;
+}
+
+static void uea_upload_pre_firmware(const struct firmware *fw_entry,
+								void *context)
+{
+	struct usb_device *usb = context;
+	const u8 *pfw;
+	u8 value;
+	u32 crc = 0;
+	int ret, size;
+
+	uea_enters(usb);
+	if (!fw_entry) {
+		uea_err(usb, "firmware is not available\n");
+		goto err;
+	}
+
+	pfw = fw_entry->data;
+	size = fw_entry->size;
+	if (size < 4)
+		goto err_fw_corrupted;
+
+	crc = get_unaligned_le32(pfw);
+	pfw += 4;
+	size -= 4;
+	if (crc32_be(0, pfw, size) != crc)
+		goto err_fw_corrupted;
+
+	/*
+	 * Start to upload firmware : send reset
+	 */
+	value = 1;
+	ret = uea_send_modem_cmd(usb, F8051_USBCS, sizeof(value), &value);
+
+	if (ret < 0) {
+		uea_err(usb, "modem reset failed with error %d\n", ret);
+		goto err;
+	}
+
+	while (size > 3) {
+		u8 len = FW_GET_BYTE(pfw);
+		u16 add = get_unaligned_le16(pfw + 1);
+
+		size -= len + 3;
+		if (size < 0)
+			goto err_fw_corrupted;
+
+		ret = uea_send_modem_cmd(usb, add, len, pfw + 3);
+		if (ret < 0) {
+			uea_err(usb, "uploading firmware data failed "
+					"with error %d\n", ret);
+			goto err;
+		}
+		pfw += len + 3;
+	}
+
+	if (size != 0)
+		goto err_fw_corrupted;
+
+	/*
+	 * Tell the modem we finish : de-assert reset
+	 */
+	value = 0;
+	ret = uea_send_modem_cmd(usb, F8051_USBCS, 1, &value);
+	if (ret < 0)
+		uea_err(usb, "modem de-assert failed with error %d\n", ret);
+	else
+		uea_info(usb, "firmware uploaded\n");
+
+	goto err;
+
+err_fw_corrupted:
+	uea_err(usb, "firmware is corrupted\n");
+err:
+	release_firmware(fw_entry);
+	uea_leaves(usb);
+}
+
+/*
+ * uea_load_firmware - Load usb firmware for pre-firmware devices.
+ */
+static int uea_load_firmware(struct usb_device *usb, unsigned int ver)
+{
+	int ret;
+	char *fw_name = EAGLE_FIRMWARE;
+
+	uea_enters(usb);
+	uea_info(usb, "pre-firmware device, uploading firmware\n");
+
+	switch (ver) {
+	case ADI930:
+		fw_name = ADI930_FIRMWARE;
+		break;
+	case EAGLE_I:
+		fw_name = EAGLE_I_FIRMWARE;
+		break;
+	case EAGLE_II:
+		fw_name = EAGLE_II_FIRMWARE;
+		break;
+	case EAGLE_III:
+		fw_name = EAGLE_III_FIRMWARE;
+		break;
+	case EAGLE_IV:
+		fw_name = EAGLE_IV_FIRMWARE;
+		break;
+	}
+
+	ret = request_firmware_nowait(THIS_MODULE, 1, fw_name, &usb->dev,
+					GFP_KERNEL, usb,
+					uea_upload_pre_firmware);
+	if (ret)
+		uea_err(usb, "firmware %s is not available\n", fw_name);
+	else
+		uea_info(usb, "loading firmware %s\n", fw_name);
+
+	uea_leaves(usb);
+	return ret;
+}
+
+/* modem management : dsp firmware, send/read CMV, monitoring statistic
+ */
+
+/*
+ * Make sure that the DSP code provided is safe to use.
+ */
+static int check_dsp_e1(const u8 *dsp, unsigned int len)
+{
+	u8 pagecount, blockcount;
+	u16 blocksize;
+	u32 pageoffset;
+	unsigned int i, j, p, pp;
+
+	pagecount = FW_GET_BYTE(dsp);
+	p = 1;
+
+	/* enough space for page offsets? */
+	if (p + 4 * pagecount > len)
+		return 1;
+
+	for (i = 0; i < pagecount; i++) {
+
+		pageoffset = get_unaligned_le32(dsp + p);
+		p += 4;
+
+		if (pageoffset == 0)
+			continue;
+
+		/* enough space for blockcount? */
+		if (pageoffset >= len)
+			return 1;
+
+		pp = pageoffset;
+		blockcount = FW_GET_BYTE(dsp + pp);
+		pp += 1;
+
+		for (j = 0; j < blockcount; j++) {
+
+			/* enough space for block header? */
+			if (pp + 4 > len)
+				return 1;
+
+			pp += 2;	/* skip blockaddr */
+			blocksize = get_unaligned_le16(dsp + pp);
+			pp += 2;
+
+			/* enough space for block data? */
+			if (pp + blocksize > len)
+				return 1;
+
+			pp += blocksize;
+		}
+	}
+
+	return 0;
+}
+
+static int check_dsp_e4(const u8 *dsp, int len)
+{
+	int i;
+	struct l1_code *p = (struct l1_code *) dsp;
+	unsigned int sum = p->code - dsp;
+
+	if (len < sum)
+		return 1;
+
+	if (strcmp("STRATIPHY ANEXA", p->string_header) != 0 &&
+	    strcmp("STRATIPHY ANEXB", p->string_header) != 0)
+		return 1;
+
+	for (i = 0; i < E4_MAX_PAGE_NUMBER; i++) {
+		struct block_index *blockidx;
+		u8 blockno = p->page_number_to_block_index[i];
+		if (blockno >= E4_NO_SWAPPAGE_HEADERS)
+			continue;
+
+		do {
+			u64 l;
+
+			if (blockno >= E4_NO_SWAPPAGE_HEADERS)
+				return 1;
+
+			blockidx = &p->page_header[blockno++];
+			if ((u8 *)(blockidx + 1) - dsp  >= len)
+				return 1;
+
+			if (le16_to_cpu(blockidx->PageNumber) != i)
+				return 1;
+
+			l = E4_PAGE_BYTES(blockidx->PageSize);
+			sum += l;
+			l += le32_to_cpu(blockidx->PageOffset);
+			if (l > len)
+				return 1;
+
+		/* zero is zero regardless endianes */
+		} while (blockidx->NotLastBlock);
+	}
+
+	return (sum == len) ? 0 : 1;
+}
+
+/*
+ * send data to the idma pipe
+ * */
+static int uea_idma_write(struct uea_softc *sc, const void *data, u32 size)
+{
+	int ret = -ENOMEM;
+	u8 *xfer_buff;
+	int bytes_read;
+
+	xfer_buff = kmemdup(data, size, GFP_KERNEL);
+	if (!xfer_buff) {
+		uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n");
+		return ret;
+	}
+
+	ret = usb_bulk_msg(sc->usb_dev,
+			 usb_sndbulkpipe(sc->usb_dev, UEA_IDMA_PIPE),
+			 xfer_buff, size, &bytes_read, BULK_TIMEOUT);
+
+	kfree(xfer_buff);
+	if (ret < 0)
+		return ret;
+	if (size != bytes_read) {
+		uea_err(INS_TO_USBDEV(sc), "size != bytes_read %d %d\n", size,
+		       bytes_read);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int request_dsp(struct uea_softc *sc)
+{
+	int ret;
+	char *dsp_name;
+
+	if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
+		if (IS_ISDN(sc))
+			dsp_name = DSP4I_FIRMWARE;
+		else
+			dsp_name = DSP4P_FIRMWARE;
+	} else if (UEA_CHIP_VERSION(sc) == ADI930) {
+		if (IS_ISDN(sc))
+			dsp_name = DSP9I_FIRMWARE;
+		else
+			dsp_name = DSP9P_FIRMWARE;
+	} else {
+		if (IS_ISDN(sc))
+			dsp_name = DSPEI_FIRMWARE;
+		else
+			dsp_name = DSPEP_FIRMWARE;
+	}
+
+	ret = request_firmware(&sc->dsp_firm, dsp_name, &sc->usb_dev->dev);
+	if (ret < 0) {
+		uea_err(INS_TO_USBDEV(sc),
+		       "requesting firmware %s failed with error %d\n",
+			dsp_name, ret);
+		return ret;
+	}
+
+	if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
+		ret = check_dsp_e4(sc->dsp_firm->data, sc->dsp_firm->size);
+	else
+		ret = check_dsp_e1(sc->dsp_firm->data, sc->dsp_firm->size);
+
+	if (ret) {
+		uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
+		       dsp_name);
+		release_firmware(sc->dsp_firm);
+		sc->dsp_firm = NULL;
+		return -EILSEQ;
+	}
+
+	return 0;
+}
+
+/*
+ * The uea_load_page() function must be called within a process context
+ */
+static void uea_load_page_e1(struct work_struct *work)
+{
+	struct uea_softc *sc = container_of(work, struct uea_softc, task);
+	u16 pageno = sc->pageno;
+	u16 ovl = sc->ovl;
+	struct block_info_e1 bi;
+
+	const u8 *p;
+	u8 pagecount, blockcount;
+	u16 blockaddr, blocksize;
+	u32 pageoffset;
+	int i;
+
+	/* reload firmware when reboot start and it's loaded already */
+	if (ovl == 0 && pageno == 0) {
+		release_firmware(sc->dsp_firm);
+		sc->dsp_firm = NULL;
+	}
+
+	if (sc->dsp_firm == NULL && request_dsp(sc) < 0)
+		return;
+
+	p = sc->dsp_firm->data;
+	pagecount = FW_GET_BYTE(p);
+	p += 1;
+
+	if (pageno >= pagecount)
+		goto bad1;
+
+	p += 4 * pageno;
+	pageoffset = get_unaligned_le32(p);
+
+	if (pageoffset == 0)
+		goto bad1;
+
+	p = sc->dsp_firm->data + pageoffset;
+	blockcount = FW_GET_BYTE(p);
+	p += 1;
+
+	uea_dbg(INS_TO_USBDEV(sc),
+	       "sending %u blocks for DSP page %u\n", blockcount, pageno);
+
+	bi.wHdr = cpu_to_le16(UEA_BIHDR);
+	bi.wOvl = cpu_to_le16(ovl);
+	bi.wOvlOffset = cpu_to_le16(ovl | 0x8000);
+
+	for (i = 0; i < blockcount; i++) {
+		blockaddr = get_unaligned_le16(p);
+		p += 2;
+
+		blocksize = get_unaligned_le16(p);
+		p += 2;
+
+		bi.wSize = cpu_to_le16(blocksize);
+		bi.wAddress = cpu_to_le16(blockaddr);
+		bi.wLast = cpu_to_le16((i == blockcount - 1) ? 1 : 0);
+
+		/* send block info through the IDMA pipe */
+		if (uea_idma_write(sc, &bi, E1_BLOCK_INFO_SIZE))
+			goto bad2;
+
+		/* send block data through the IDMA pipe */
+		if (uea_idma_write(sc, p, blocksize))
+			goto bad2;
+
+		p += blocksize;
+	}
+
+	return;
+
+bad2:
+	uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", i);
+	return;
+bad1:
+	uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n", pageno);
+}
+
+static void __uea_load_page_e4(struct uea_softc *sc, u8 pageno, int boot)
+{
+	struct block_info_e4 bi;
+	struct block_index *blockidx;
+	struct l1_code *p = (struct l1_code *) sc->dsp_firm->data;
+	u8 blockno = p->page_number_to_block_index[pageno];
+
+	bi.wHdr = cpu_to_be16(UEA_BIHDR);
+	bi.bBootPage = boot;
+	bi.bPageNumber = pageno;
+	bi.wReserved = cpu_to_be16(UEA_RESERVED);
+
+	do {
+		const u8 *blockoffset;
+		unsigned int blocksize;
+
+		blockidx = &p->page_header[blockno];
+		blocksize = E4_PAGE_BYTES(blockidx->PageSize);
+		blockoffset = sc->dsp_firm->data + le32_to_cpu(
+							blockidx->PageOffset);
+
+		bi.dwSize = cpu_to_be32(blocksize);
+		bi.dwAddress = cpu_to_be32(le32_to_cpu(blockidx->PageAddress));
+
+		uea_dbg(INS_TO_USBDEV(sc),
+			"sending block %u for DSP page "
+			"%u size %u address %x\n",
+			blockno, pageno, blocksize,
+			le32_to_cpu(blockidx->PageAddress));
+
+		/* send block info through the IDMA pipe */
+		if (uea_idma_write(sc, &bi, E4_BLOCK_INFO_SIZE))
+			goto bad;
+
+		/* send block data through the IDMA pipe */
+		if (uea_idma_write(sc, blockoffset, blocksize))
+			goto bad;
+
+		blockno++;
+	} while (blockidx->NotLastBlock);
+
+	return;
+
+bad:
+	uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", blockno);
+	return;
+}
+
+static void uea_load_page_e4(struct work_struct *work)
+{
+	struct uea_softc *sc = container_of(work, struct uea_softc, task);
+	u8 pageno = sc->pageno;
+	int i;
+	struct block_info_e4 bi;
+	struct l1_code *p;
+
+	uea_dbg(INS_TO_USBDEV(sc), "sending DSP page %u\n", pageno);
+
+	/* reload firmware when reboot start and it's loaded already */
+	if (pageno == 0) {
+		release_firmware(sc->dsp_firm);
+		sc->dsp_firm = NULL;
+	}
+
+	if (sc->dsp_firm == NULL && request_dsp(sc) < 0)
+		return;
+
+	p = (struct l1_code *) sc->dsp_firm->data;
+	if (pageno >= le16_to_cpu(p->page_header[0].PageNumber)) {
+		uea_err(INS_TO_USBDEV(sc), "invalid DSP "
+						"page %u requested\n", pageno);
+		return;
+	}
+
+	if (pageno != 0) {
+		__uea_load_page_e4(sc, pageno, 0);
+		return;
+	}
+
+	uea_dbg(INS_TO_USBDEV(sc),
+	       "sending Main DSP page %u\n", p->page_header[0].PageNumber);
+
+	for (i = 0; i < le16_to_cpu(p->page_header[0].PageNumber); i++) {
+		if (E4_IS_BOOT_PAGE(p->page_header[i].PageSize))
+			__uea_load_page_e4(sc, i, 1);
+	}
+
+	uea_dbg(INS_TO_USBDEV(sc) , "sending start bi\n");
+
+	bi.wHdr = cpu_to_be16(UEA_BIHDR);
+	bi.bBootPage = 0;
+	bi.bPageNumber = 0xff;
+	bi.wReserved = cpu_to_be16(UEA_RESERVED);
+	bi.dwSize = cpu_to_be32(E4_PAGE_BYTES(p->page_header[0].PageSize));
+	bi.dwAddress = cpu_to_be32(le32_to_cpu(p->page_header[0].PageAddress));
+
+	/* send block info through the IDMA pipe */
+	if (uea_idma_write(sc, &bi, E4_BLOCK_INFO_SIZE))
+		uea_err(INS_TO_USBDEV(sc), "sending DSP start bi failed\n");
+}
+
+static inline void wake_up_cmv_ack(struct uea_softc *sc)
+{
+	BUG_ON(sc->cmv_ack);
+	sc->cmv_ack = 1;
+	wake_up(&sc->sync_q);
+}
+
+static inline int wait_cmv_ack(struct uea_softc *sc)
+{
+	int ret = uea_wait(sc, sc->cmv_ack , ACK_TIMEOUT);
+
+	sc->cmv_ack = 0;
+
+	uea_dbg(INS_TO_USBDEV(sc), "wait_event_timeout : %d ms\n",
+			jiffies_to_msecs(ret));
+
+	if (ret < 0)
+		return ret;
+
+	return (ret == 0) ? -ETIMEDOUT : 0;
+}
+
+#define UCDC_SEND_ENCAPSULATED_COMMAND 0x00
+
+static int uea_request(struct uea_softc *sc,
+		u16 value, u16 index, u16 size, const void *data)
+{
+	u8 *xfer_buff;
+	int ret = -ENOMEM;
+
+	xfer_buff = kmemdup(data, size, GFP_KERNEL);
+	if (!xfer_buff) {
+		uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n");
+		return ret;
+	}
+
+	ret = usb_control_msg(sc->usb_dev, usb_sndctrlpipe(sc->usb_dev, 0),
+			      UCDC_SEND_ENCAPSULATED_COMMAND,
+			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      value, index, xfer_buff, size, CTRL_TIMEOUT);
+
+	kfree(xfer_buff);
+	if (ret < 0) {
+		uea_err(INS_TO_USBDEV(sc), "usb_control_msg error %d\n", ret);
+		return ret;
+	}
+
+	if (ret != size) {
+		uea_err(INS_TO_USBDEV(sc),
+		       "usb_control_msg send only %d bytes (instead of %d)\n",
+		       ret, size);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int uea_cmv_e1(struct uea_softc *sc,
+		u8 function, u32 address, u16 offset, u32 data)
+{
+	struct cmv_e1 cmv;
+	int ret;
+
+	uea_enters(INS_TO_USBDEV(sc));
+	uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Address : %c%c%c%c, "
+			"offset : 0x%04x, data : 0x%08x\n",
+			E1_FUNCTION_TYPE(function),
+			E1_FUNCTION_SUBTYPE(function),
+			E1_GETSA1(address), E1_GETSA2(address),
+			E1_GETSA3(address),
+			E1_GETSA4(address), offset, data);
+
+	/* we send a request, but we expect a reply */
+	sc->cmv_dsc.e1.function = function | 0x2;
+	sc->cmv_dsc.e1.idx++;
+	sc->cmv_dsc.e1.address = address;
+	sc->cmv_dsc.e1.offset = offset;
+
+	cmv.wPreamble = cpu_to_le16(E1_PREAMBLE);
+	cmv.bDirection = E1_HOSTTOMODEM;
+	cmv.bFunction = function;
+	cmv.wIndex = cpu_to_le16(sc->cmv_dsc.e1.idx);
+	put_unaligned_le32(address, &cmv.dwSymbolicAddress);
+	cmv.wOffsetAddress = cpu_to_le16(offset);
+	put_unaligned_le32(data >> 16 | data << 16, &cmv.dwData);
+
+	ret = uea_request(sc, UEA_E1_SET_BLOCK, UEA_MPTX_START,
+							sizeof(cmv), &cmv);
+	if (ret < 0)
+		return ret;
+	ret = wait_cmv_ack(sc);
+	uea_leaves(INS_TO_USBDEV(sc));
+	return ret;
+}
+
+static int uea_cmv_e4(struct uea_softc *sc,
+		u16 function, u16 group, u16 address, u16 offset, u32 data)
+{
+	struct cmv_e4 cmv;
+	int ret;
+
+	uea_enters(INS_TO_USBDEV(sc));
+	memset(&cmv, 0, sizeof(cmv));
+
+	uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Group : 0x%04x, "
+		 "Address : 0x%04x, offset : 0x%04x, data : 0x%08x\n",
+		 E4_FUNCTION_TYPE(function), E4_FUNCTION_SUBTYPE(function),
+		 group, address, offset, data);
+
+	/* we send a request, but we expect a reply */
+	sc->cmv_dsc.e4.function = function | (0x1 << 4);
+	sc->cmv_dsc.e4.offset = offset;
+	sc->cmv_dsc.e4.address = address;
+	sc->cmv_dsc.e4.group = group;
+
+	cmv.wFunction = cpu_to_be16(function);
+	cmv.wGroup = cpu_to_be16(group);
+	cmv.wAddress = cpu_to_be16(address);
+	cmv.wOffset = cpu_to_be16(offset);
+	cmv.dwData[0] = cpu_to_be32(data);
+
+	ret = uea_request(sc, UEA_E4_SET_BLOCK, UEA_MPTX_START,
+							sizeof(cmv), &cmv);
+	if (ret < 0)
+		return ret;
+	ret = wait_cmv_ack(sc);
+	uea_leaves(INS_TO_USBDEV(sc));
+	return ret;
+}
+
+static inline int uea_read_cmv_e1(struct uea_softc *sc,
+		u32 address, u16 offset, u32 *data)
+{
+	int ret = uea_cmv_e1(sc, E1_MAKEFUNCTION(E1_MEMACCESS, E1_REQUESTREAD),
+			  address, offset, 0);
+	if (ret < 0)
+		uea_err(INS_TO_USBDEV(sc),
+			"reading cmv failed with error %d\n", ret);
+	else
+		*data = sc->data;
+
+	return ret;
+}
+
+static inline int uea_read_cmv_e4(struct uea_softc *sc,
+		u8 size, u16 group, u16 address, u16 offset, u32 *data)
+{
+	int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS,
+							E4_REQUESTREAD, size),
+			  group, address, offset, 0);
+	if (ret < 0)
+		uea_err(INS_TO_USBDEV(sc),
+			"reading cmv failed with error %d\n", ret);
+	else {
+		*data = sc->data;
+		/* size is in 16-bit word quantities */
+		if (size > 2)
+			*(data + 1) = sc->data1;
+	}
+	return ret;
+}
+
+static inline int uea_write_cmv_e1(struct uea_softc *sc,
+		u32 address, u16 offset, u32 data)
+{
+	int ret = uea_cmv_e1(sc, E1_MAKEFUNCTION(E1_MEMACCESS, E1_REQUESTWRITE),
+			  address, offset, data);
+	if (ret < 0)
+		uea_err(INS_TO_USBDEV(sc),
+			"writing cmv failed with error %d\n", ret);
+
+	return ret;
+}
+
+static inline int uea_write_cmv_e4(struct uea_softc *sc,
+		u8 size, u16 group, u16 address, u16 offset, u32 data)
+{
+	int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS,
+							E4_REQUESTWRITE, size),
+			  group, address, offset, data);
+	if (ret < 0)
+		uea_err(INS_TO_USBDEV(sc),
+			"writing cmv failed with error %d\n", ret);
+
+	return ret;
+}
+
+static void uea_set_bulk_timeout(struct uea_softc *sc, u32 dsrate)
+{
+	int ret;
+	u16 timeout;
+
+	/* in bulk mode the modem have problem with high rate
+	 * changing internal timing could improve things, but the
+	 * value is mysterious.
+	 * ADI930 don't support it (-EPIPE error).
+	 */
+
+	if (UEA_CHIP_VERSION(sc) == ADI930 ||
+	    altsetting[sc->modem_index] > 0 ||
+	    sc->stats.phy.dsrate == dsrate)
+		return;
+
+	/* Original timming (1Mbit/s) from ADI (used in windows driver) */
+	timeout = (dsrate <= 1024*1024) ? 0 : 1;
+	ret = uea_request(sc, UEA_SET_TIMEOUT, timeout, 0, NULL);
+	uea_info(INS_TO_USBDEV(sc), "setting new timeout %d%s\n",
+		 timeout,  ret < 0 ? " failed" : "");
+
+}
+
+/*
+ * Monitor the modem and update the stat
+ * return 0 if everything is ok
+ * return < 0 if an error occurs (-EAGAIN reboot needed)
+ */
+static int uea_stat_e1(struct uea_softc *sc)
+{
+	u32 data;
+	int ret;
+
+	uea_enters(INS_TO_USBDEV(sc));
+	data = sc->stats.phy.state;
+
+	ret = uea_read_cmv_e1(sc, E1_SA_STAT, 0, &sc->stats.phy.state);
+	if (ret < 0)
+		return ret;
+
+	switch (GET_STATUS(sc->stats.phy.state)) {
+	case 0:		/* not yet synchronized */
+		uea_dbg(INS_TO_USBDEV(sc),
+		       "modem not yet synchronized\n");
+		return 0;
+
+	case 1:		/* initialization */
+		uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n");
+		return 0;
+
+	case 2:		/* operational */
+		uea_vdbg(INS_TO_USBDEV(sc), "modem operational\n");
+		break;
+
+	case 3:		/* fail ... */
+		uea_info(INS_TO_USBDEV(sc), "modem synchronization failed"
+					" (may be try other cmv/dsp)\n");
+		return -EAGAIN;
+
+	case 4 ... 6:	/* test state */
+		uea_warn(INS_TO_USBDEV(sc),
+				"modem in test mode - not supported\n");
+		return -EAGAIN;
+
+	case 7:		/* fast-retain ... */
+		uea_info(INS_TO_USBDEV(sc), "modem in fast-retain mode\n");
+		return 0;
+	default:
+		uea_err(INS_TO_USBDEV(sc), "modem invalid SW mode %d\n",
+			GET_STATUS(sc->stats.phy.state));
+		return -EAGAIN;
+	}
+
+	if (GET_STATUS(data) != 2) {
+		uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_OFF, 0, NULL);
+		uea_info(INS_TO_USBDEV(sc), "modem operational\n");
+
+		/* release the dsp firmware as it is not needed until
+		 * the next failure
+		 */
+		release_firmware(sc->dsp_firm);
+		sc->dsp_firm = NULL;
+	}
+
+	/* always update it as atm layer could not be init when we switch to
+	 * operational state
+	 */
+	UPDATE_ATM_SIGNAL(ATM_PHY_SIG_FOUND);
+
+	/* wake up processes waiting for synchronization */
+	wake_up(&sc->sync_q);
+
+	ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 2, &sc->stats.phy.flags);
+	if (ret < 0)
+		return ret;
+	sc->stats.phy.mflags |= sc->stats.phy.flags;
+
+	/* in case of a flags ( for example delineation LOSS (& 0x10)),
+	 * we check the status again in order to detect the failure earlier
+	 */
+	if (sc->stats.phy.flags) {
+		uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n",
+		       sc->stats.phy.flags);
+		return 0;
+	}
+
+	ret = uea_read_cmv_e1(sc, E1_SA_RATE, 0, &data);
+	if (ret < 0)
+		return ret;
+
+	uea_set_bulk_timeout(sc, (data >> 16) * 32);
+	sc->stats.phy.dsrate = (data >> 16) * 32;
+	sc->stats.phy.usrate = (data & 0xffff) * 32;
+	UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424);
+
+	ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 23, &data);
+	if (ret < 0)
+		return ret;
+	sc->stats.phy.dsattenuation = (data & 0xff) / 2;
+
+	ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 47, &data);
+	if (ret < 0)
+		return ret;
+	sc->stats.phy.usattenuation = (data & 0xff) / 2;
+
+	ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 25, &sc->stats.phy.dsmargin);
+	if (ret < 0)
+		return ret;
+
+	ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 49, &sc->stats.phy.usmargin);
+	if (ret < 0)
+		return ret;
+
+	ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 51, &sc->stats.phy.rxflow);
+	if (ret < 0)
+		return ret;
+
+	ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 52, &sc->stats.phy.txflow);
+	if (ret < 0)
+		return ret;
+
+	ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 54, &sc->stats.phy.dsunc);
+	if (ret < 0)
+		return ret;
+
+	/* only for atu-c */
+	ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 58, &sc->stats.phy.usunc);
+	if (ret < 0)
+		return ret;
+
+	ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 53, &sc->stats.phy.dscorr);
+	if (ret < 0)
+		return ret;
+
+	/* only for atu-c */
+	ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 57, &sc->stats.phy.uscorr);
+	if (ret < 0)
+		return ret;
+
+	ret = uea_read_cmv_e1(sc, E1_SA_INFO, 8, &sc->stats.phy.vidco);
+	if (ret < 0)
+		return ret;
+
+	ret = uea_read_cmv_e1(sc, E1_SA_INFO, 13, &sc->stats.phy.vidcpe);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int uea_stat_e4(struct uea_softc *sc)
+{
+	u32 data;
+	u32 tmp_arr[2];
+	int ret;
+
+	uea_enters(INS_TO_USBDEV(sc));
+	data = sc->stats.phy.state;
+
+	/* XXX only need to be done before operationnal... */
+	ret = uea_read_cmv_e4(sc, 1, E4_SA_STAT, 0, 0, &sc->stats.phy.state);
+	if (ret < 0)
+		return ret;
+
+	switch (sc->stats.phy.state) {
+	case 0x0:	/* not yet synchronized */
+	case 0x1:
+	case 0x3:
+	case 0x4:
+		uea_dbg(INS_TO_USBDEV(sc), "modem not yet "
+						"synchronized\n");
+		return 0;
+	case 0x5:	/* initialization */
+	case 0x6:
+	case 0x9:
+	case 0xa:
+		uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n");
+		return 0;
+	case 0x2:	/* fail ... */
+		uea_info(INS_TO_USBDEV(sc), "modem synchronization "
+				"failed (may be try other cmv/dsp)\n");
+		return -EAGAIN;
+	case 0x7:	/* operational */
+		break;
+	default:
+		uea_warn(INS_TO_USBDEV(sc), "unknown state: %x\n",
+						sc->stats.phy.state);
+		return 0;
+	}
+
+	if (data != 7) {
+		uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_OFF, 0, NULL);
+		uea_info(INS_TO_USBDEV(sc), "modem operational\n");
+
+		/* release the dsp firmware as it is not needed until
+		 * the next failure
+		 */
+		release_firmware(sc->dsp_firm);
+		sc->dsp_firm = NULL;
+	}
+
+	/* always update it as atm layer could not be init when we switch to
+	 * operational state
+	 */
+	UPDATE_ATM_SIGNAL(ATM_PHY_SIG_FOUND);
+
+	/* wake up processes waiting for synchronization */
+	wake_up(&sc->sync_q);
+
+	/* TODO improve this state machine :
+	 * we need some CMV info : what they do and their unit
+	 * we should find the equivalent of eagle3- CMV
+	 */
+	/* check flags */
+	ret = uea_read_cmv_e4(sc, 1, E4_SA_DIAG, 0, 0, &sc->stats.phy.flags);
+	if (ret < 0)
+		return ret;
+	sc->stats.phy.mflags |= sc->stats.phy.flags;
+
+	/* in case of a flags ( for example delineation LOSS (& 0x10)),
+	 * we check the status again in order to detect the failure earlier
+	 */
+	if (sc->stats.phy.flags) {
+		uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n",
+		       sc->stats.phy.flags);
+		if (sc->stats.phy.flags & 1) /* delineation LOSS */
+			return -EAGAIN;
+		if (sc->stats.phy.flags & 0x4000) /* Reset Flag */
+			return -EAGAIN;
+		return 0;
+	}
+
+	/* rate data may be in upper or lower half of 64 bit word, strange */
+	ret = uea_read_cmv_e4(sc, 4, E4_SA_RATE, 0, 0, tmp_arr);
+	if (ret < 0)
+		return ret;
+	data = (tmp_arr[0]) ? tmp_arr[0] : tmp_arr[1];
+	sc->stats.phy.usrate = data / 1000;
+
+	ret = uea_read_cmv_e4(sc, 4, E4_SA_RATE, 1, 0, tmp_arr);
+	if (ret < 0)
+		return ret;
+	data = (tmp_arr[0]) ? tmp_arr[0] : tmp_arr[1];
+	uea_set_bulk_timeout(sc, data / 1000);
+	sc->stats.phy.dsrate = data / 1000;
+	UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424);
+
+	ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 68, 1, &data);
+	if (ret < 0)
+		return ret;
+	sc->stats.phy.dsattenuation = data / 10;
+
+	ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 69, 1, &data);
+	if (ret < 0)
+		return ret;
+	sc->stats.phy.usattenuation = data / 10;
+
+	ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 68, 3, &data);
+	if (ret < 0)
+		return ret;
+	sc->stats.phy.dsmargin = data / 2;
+
+	ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 69, 3, &data);
+	if (ret < 0)
+		return ret;
+	sc->stats.phy.usmargin = data / 10;
+
+	return 0;
+}
+
+static void cmvs_file_name(struct uea_softc *sc, char *const cmv_name, int ver)
+{
+	char file_arr[] = "CMVxy.bin";
+	char *file;
+
+	kernel_param_lock(THIS_MODULE);
+	/* set proper name corresponding modem version and line type */
+	if (cmv_file[sc->modem_index] == NULL) {
+		if (UEA_CHIP_VERSION(sc) == ADI930)
+			file_arr[3] = '9';
+		else if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
+			file_arr[3] = '4';
+		else
+			file_arr[3] = 'e';
+
+		file_arr[4] = IS_ISDN(sc) ? 'i' : 'p';
+		file = file_arr;
+	} else
+		file = cmv_file[sc->modem_index];
+
+	strcpy(cmv_name, FW_DIR);
+	strlcat(cmv_name, file, UEA_FW_NAME_MAX);
+	if (ver == 2)
+		strlcat(cmv_name, ".v2", UEA_FW_NAME_MAX);
+	kernel_param_unlock(THIS_MODULE);
+}
+
+static int request_cmvs_old(struct uea_softc *sc,
+		 void **cmvs, const struct firmware **fw)
+{
+	int ret, size;
+	u8 *data;
+	char cmv_name[UEA_FW_NAME_MAX]; /* 30 bytes stack variable */
+
+	cmvs_file_name(sc, cmv_name, 1);
+	ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev);
+	if (ret < 0) {
+		uea_err(INS_TO_USBDEV(sc),
+		       "requesting firmware %s failed with error %d\n",
+		       cmv_name, ret);
+		return ret;
+	}
+
+	data = (u8 *) (*fw)->data;
+	size = (*fw)->size;
+	if (size < 1)
+		goto err_fw_corrupted;
+
+	if (size != *data * sizeof(struct uea_cmvs_v1) + 1)
+		goto err_fw_corrupted;
+
+	*cmvs = (void *)(data + 1);
+	return *data;
+
+err_fw_corrupted:
+	uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", cmv_name);
+	release_firmware(*fw);
+	return -EILSEQ;
+}
+
+static int request_cmvs(struct uea_softc *sc,
+		 void **cmvs, const struct firmware **fw, int *ver)
+{
+	int ret, size;
+	u32 crc;
+	u8 *data;
+	char cmv_name[UEA_FW_NAME_MAX]; /* 30 bytes stack variable */
+
+	cmvs_file_name(sc, cmv_name, 2);
+	ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev);
+	if (ret < 0) {
+		/* if caller can handle old version, try to provide it */
+		if (*ver == 1) {
+			uea_warn(INS_TO_USBDEV(sc), "requesting "
+							"firmware %s failed, "
+				"try to get older cmvs\n", cmv_name);
+			return request_cmvs_old(sc, cmvs, fw);
+		}
+		uea_err(INS_TO_USBDEV(sc),
+		       "requesting firmware %s failed with error %d\n",
+		       cmv_name, ret);
+		return ret;
+	}
+
+	size = (*fw)->size;
+	data = (u8 *) (*fw)->data;
+	if (size < 4 || strncmp(data, "cmv2", 4) != 0) {
+		if (*ver == 1) {
+			uea_warn(INS_TO_USBDEV(sc), "firmware %s is corrupted,"
+				" try to get older cmvs\n", cmv_name);
+			release_firmware(*fw);
+			return request_cmvs_old(sc, cmvs, fw);
+		}
+		goto err_fw_corrupted;
+	}
+
+	*ver = 2;
+
+	data += 4;
+	size -= 4;
+	if (size < 5)
+		goto err_fw_corrupted;
+
+	crc = get_unaligned_le32(data);
+	data += 4;
+	size -= 4;
+	if (crc32_be(0, data, size) != crc)
+		goto err_fw_corrupted;
+
+	if (size != *data * sizeof(struct uea_cmvs_v2) + 1)
+		goto err_fw_corrupted;
+
+	*cmvs = (void *) (data + 1);
+	return *data;
+
+err_fw_corrupted:
+	uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", cmv_name);
+	release_firmware(*fw);
+	return -EILSEQ;
+}
+
+static int uea_send_cmvs_e1(struct uea_softc *sc)
+{
+	int i, ret, len;
+	void *cmvs_ptr;
+	const struct firmware *cmvs_fw;
+	int ver = 1; /* we can handle v1 cmv firmware version; */
+
+	/* Enter in R-IDLE (cmv) until instructed otherwise */
+	ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 1);
+	if (ret < 0)
+		return ret;
+
+	/* Dump firmware version */
+	ret = uea_read_cmv_e1(sc, E1_SA_INFO, 10, &sc->stats.phy.firmid);
+	if (ret < 0)
+		return ret;
+	uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n",
+			sc->stats.phy.firmid);
+
+	/* get options */
+	ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
+	if (ret < 0)
+		return ret;
+
+	/* send options */
+	if (ver == 1) {
+		struct uea_cmvs_v1 *cmvs_v1 = cmvs_ptr;
+
+		uea_warn(INS_TO_USBDEV(sc), "use deprecated cmvs version, "
+			"please update your firmware\n");
+
+		for (i = 0; i < len; i++) {
+			ret = uea_write_cmv_e1(sc,
+				get_unaligned_le32(&cmvs_v1[i].address),
+				get_unaligned_le16(&cmvs_v1[i].offset),
+				get_unaligned_le32(&cmvs_v1[i].data));
+			if (ret < 0)
+				goto out;
+		}
+	} else if (ver == 2) {
+		struct uea_cmvs_v2 *cmvs_v2 = cmvs_ptr;
+
+		for (i = 0; i < len; i++) {
+			ret = uea_write_cmv_e1(sc,
+				get_unaligned_le32(&cmvs_v2[i].address),
+				(u16) get_unaligned_le32(&cmvs_v2[i].offset),
+				get_unaligned_le32(&cmvs_v2[i].data));
+			if (ret < 0)
+				goto out;
+		}
+	} else {
+		/* This really should not happen */
+		uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
+		goto out;
+	}
+
+	/* Enter in R-ACT-REQ */
+	ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 2);
+	uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
+	uea_info(INS_TO_USBDEV(sc), "modem started, waiting "
+						"synchronization...\n");
+out:
+	release_firmware(cmvs_fw);
+	return ret;
+}
+
+static int uea_send_cmvs_e4(struct uea_softc *sc)
+{
+	int i, ret, len;
+	void *cmvs_ptr;
+	const struct firmware *cmvs_fw;
+	int ver = 2; /* we can only handle v2 cmv firmware version; */
+
+	/* Enter in R-IDLE (cmv) until instructed otherwise */
+	ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 1);
+	if (ret < 0)
+		return ret;
+
+	/* Dump firmware version */
+	/* XXX don't read the 3th byte as it is always 6 */
+	ret = uea_read_cmv_e4(sc, 2, E4_SA_INFO, 55, 0, &sc->stats.phy.firmid);
+	if (ret < 0)
+		return ret;
+	uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n",
+			sc->stats.phy.firmid);
+
+
+	/* get options */
+	ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
+	if (ret < 0)
+		return ret;
+
+	/* send options */
+	if (ver == 2) {
+		struct uea_cmvs_v2 *cmvs_v2 = cmvs_ptr;
+
+		for (i = 0; i < len; i++) {
+			ret = uea_write_cmv_e4(sc, 1,
+				get_unaligned_le32(&cmvs_v2[i].group),
+				get_unaligned_le32(&cmvs_v2[i].address),
+				get_unaligned_le32(&cmvs_v2[i].offset),
+				get_unaligned_le32(&cmvs_v2[i].data));
+			if (ret < 0)
+				goto out;
+		}
+	} else {
+		/* This really should not happen */
+		uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
+		goto out;
+	}
+
+	/* Enter in R-ACT-REQ */
+	ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 2);
+	uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
+	uea_info(INS_TO_USBDEV(sc), "modem started, waiting "
+						"synchronization...\n");
+out:
+	release_firmware(cmvs_fw);
+	return ret;
+}
+
+/* Start boot post firmware modem:
+ * - send reset commands through usb control pipe
+ * - start workqueue for DSP loading
+ * - send CMV options to modem
+ */
+
+static int uea_start_reset(struct uea_softc *sc)
+{
+	u16 zero = 0;	/* ;-) */
+	int ret;
+
+	uea_enters(INS_TO_USBDEV(sc));
+	uea_info(INS_TO_USBDEV(sc), "(re)booting started\n");
+
+	/* mask interrupt */
+	sc->booting = 1;
+	/* We need to set this here because, a ack timeout could have occurred,
+	 * but before we start the reboot, the ack occurs and set this to 1.
+	 * So we will failed to wait Ready CMV.
+	 */
+	sc->cmv_ack = 0;
+	UPDATE_ATM_SIGNAL(ATM_PHY_SIG_LOST);
+
+	/* reset statistics */
+	memset(&sc->stats, 0, sizeof(struct uea_stats));
+
+	/* tell the modem that we want to boot in IDMA mode */
+	uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL);
+	uea_request(sc, UEA_SET_MODE, UEA_BOOT_IDMA, 0, NULL);
+
+	/* enter reset mode */
+	uea_request(sc, UEA_SET_MODE, UEA_START_RESET, 0, NULL);
+
+	/* original driver use 200ms, but windows driver use 100ms */
+	ret = uea_wait(sc, 0, msecs_to_jiffies(100));
+	if (ret < 0)
+		return ret;
+
+	/* leave reset mode */
+	uea_request(sc, UEA_SET_MODE, UEA_END_RESET, 0, NULL);
+
+	if (UEA_CHIP_VERSION(sc) != EAGLE_IV) {
+		/* clear tx and rx mailboxes */
+		uea_request(sc, UEA_SET_2183_DATA, UEA_MPTX_MAILBOX, 2, &zero);
+		uea_request(sc, UEA_SET_2183_DATA, UEA_MPRX_MAILBOX, 2, &zero);
+		uea_request(sc, UEA_SET_2183_DATA, UEA_SWAP_MAILBOX, 2, &zero);
+	}
+
+	ret = uea_wait(sc, 0, msecs_to_jiffies(1000));
+	if (ret < 0)
+		return ret;
+
+	if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
+		sc->cmv_dsc.e4.function = E4_MAKEFUNCTION(E4_ADSLDIRECTIVE,
+							E4_MODEMREADY, 1);
+	else
+		sc->cmv_dsc.e1.function = E1_MAKEFUNCTION(E1_ADSLDIRECTIVE,
+							E1_MODEMREADY);
+
+	/* demask interrupt */
+	sc->booting = 0;
+
+	/* start loading DSP */
+	sc->pageno = 0;
+	sc->ovl = 0;
+	schedule_work(&sc->task);
+
+	/* wait for modem ready CMV */
+	ret = wait_cmv_ack(sc);
+	if (ret < 0)
+		return ret;
+
+	uea_vdbg(INS_TO_USBDEV(sc), "Ready CMV received\n");
+
+	ret = sc->send_cmvs(sc);
+	if (ret < 0)
+		return ret;
+
+	sc->reset = 0;
+	uea_leaves(INS_TO_USBDEV(sc));
+	return ret;
+}
+
+/*
+ * In case of an error wait 1s before rebooting the modem
+ * if the modem don't request reboot (-EAGAIN).
+ * Monitor the modem every 1s.
+ */
+
+static int uea_kthread(void *data)
+{
+	struct uea_softc *sc = data;
+	int ret = -EAGAIN;
+
+	set_freezable();
+	uea_enters(INS_TO_USBDEV(sc));
+	while (!kthread_should_stop()) {
+		if (ret < 0 || sc->reset)
+			ret = uea_start_reset(sc);
+		if (!ret)
+			ret = sc->stat(sc);
+		if (ret != -EAGAIN)
+			uea_wait(sc, 0, msecs_to_jiffies(1000));
+		try_to_freeze();
+	}
+	uea_leaves(INS_TO_USBDEV(sc));
+	return ret;
+}
+
+/* Load second usb firmware for ADI930 chip */
+static int load_XILINX_firmware(struct uea_softc *sc)
+{
+	const struct firmware *fw_entry;
+	int ret, size, u, ln;
+	const u8 *pfw;
+	u8 value;
+	char *fw_name = FPGA930_FIRMWARE;
+
+	uea_enters(INS_TO_USBDEV(sc));
+
+	ret = request_firmware(&fw_entry, fw_name, &sc->usb_dev->dev);
+	if (ret) {
+		uea_err(INS_TO_USBDEV(sc), "firmware %s is not available\n",
+		       fw_name);
+		goto err0;
+	}
+
+	pfw = fw_entry->data;
+	size = fw_entry->size;
+	if (size != 0x577B) {
+		uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
+		       fw_name);
+		ret = -EILSEQ;
+		goto err1;
+	}
+	for (u = 0; u < size; u += ln) {
+		ln = min(size - u, 64);
+		ret = uea_request(sc, 0xe, 0, ln, pfw + u);
+		if (ret < 0) {
+			uea_err(INS_TO_USBDEV(sc),
+			       "elsa download data failed (%d)\n", ret);
+			goto err1;
+		}
+	}
+
+	/* finish to send the fpga */
+	ret = uea_request(sc, 0xe, 1, 0, NULL);
+	if (ret < 0) {
+		uea_err(INS_TO_USBDEV(sc),
+				"elsa download data failed (%d)\n", ret);
+		goto err1;
+	}
+
+	/* Tell the modem we finish : de-assert reset */
+	value = 0;
+	ret = uea_send_modem_cmd(sc->usb_dev, 0xe, 1, &value);
+	if (ret < 0)
+		uea_err(sc->usb_dev, "elsa de-assert failed with error"
+								" %d\n", ret);
+
+err1:
+	release_firmware(fw_entry);
+err0:
+	uea_leaves(INS_TO_USBDEV(sc));
+	return ret;
+}
+
+/* The modem send us an ack. First with check if it right */
+static void uea_dispatch_cmv_e1(struct uea_softc *sc, struct intr_pkt *intr)
+{
+	struct cmv_dsc_e1 *dsc = &sc->cmv_dsc.e1;
+	struct cmv_e1 *cmv = &intr->u.e1.s2.cmv;
+
+	uea_enters(INS_TO_USBDEV(sc));
+	if (le16_to_cpu(cmv->wPreamble) != E1_PREAMBLE)
+		goto bad1;
+
+	if (cmv->bDirection != E1_MODEMTOHOST)
+		goto bad1;
+
+	/* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to
+	 * the first MEMACCESS cmv. Ignore it...
+	 */
+	if (cmv->bFunction != dsc->function) {
+		if (UEA_CHIP_VERSION(sc) == ADI930
+				&& cmv->bFunction ==  E1_MAKEFUNCTION(2, 2)) {
+			cmv->wIndex = cpu_to_le16(dsc->idx);
+			put_unaligned_le32(dsc->address,
+						&cmv->dwSymbolicAddress);
+			cmv->wOffsetAddress = cpu_to_le16(dsc->offset);
+		} else
+			goto bad2;
+	}
+
+	if (cmv->bFunction == E1_MAKEFUNCTION(E1_ADSLDIRECTIVE,
+							E1_MODEMREADY)) {
+		wake_up_cmv_ack(sc);
+		uea_leaves(INS_TO_USBDEV(sc));
+		return;
+	}
+
+	/* in case of MEMACCESS */
+	if (le16_to_cpu(cmv->wIndex) != dsc->idx ||
+	    get_unaligned_le32(&cmv->dwSymbolicAddress) != dsc->address ||
+	    le16_to_cpu(cmv->wOffsetAddress) != dsc->offset)
+		goto bad2;
+
+	sc->data = get_unaligned_le32(&cmv->dwData);
+	sc->data = sc->data << 16 | sc->data >> 16;
+
+	wake_up_cmv_ack(sc);
+	uea_leaves(INS_TO_USBDEV(sc));
+	return;
+
+bad2:
+	uea_err(INS_TO_USBDEV(sc), "unexpected cmv received, "
+			"Function : %d, Subfunction : %d\n",
+			E1_FUNCTION_TYPE(cmv->bFunction),
+			E1_FUNCTION_SUBTYPE(cmv->bFunction));
+	uea_leaves(INS_TO_USBDEV(sc));
+	return;
+
+bad1:
+	uea_err(INS_TO_USBDEV(sc), "invalid cmv received, "
+			"wPreamble %d, bDirection %d\n",
+			le16_to_cpu(cmv->wPreamble), cmv->bDirection);
+	uea_leaves(INS_TO_USBDEV(sc));
+}
+
+/* The modem send us an ack. First with check if it right */
+static void uea_dispatch_cmv_e4(struct uea_softc *sc, struct intr_pkt *intr)
+{
+	struct cmv_dsc_e4 *dsc = &sc->cmv_dsc.e4;
+	struct cmv_e4 *cmv = &intr->u.e4.s2.cmv;
+
+	uea_enters(INS_TO_USBDEV(sc));
+	uea_dbg(INS_TO_USBDEV(sc), "cmv %x %x %x %x %x %x\n",
+		be16_to_cpu(cmv->wGroup), be16_to_cpu(cmv->wFunction),
+		be16_to_cpu(cmv->wOffset), be16_to_cpu(cmv->wAddress),
+		be32_to_cpu(cmv->dwData[0]), be32_to_cpu(cmv->dwData[1]));
+
+	if (be16_to_cpu(cmv->wFunction) != dsc->function)
+		goto bad2;
+
+	if (be16_to_cpu(cmv->wFunction) == E4_MAKEFUNCTION(E4_ADSLDIRECTIVE,
+						E4_MODEMREADY, 1)) {
+		wake_up_cmv_ack(sc);
+		uea_leaves(INS_TO_USBDEV(sc));
+		return;
+	}
+
+	/* in case of MEMACCESS */
+	if (be16_to_cpu(cmv->wOffset) != dsc->offset ||
+	    be16_to_cpu(cmv->wGroup) != dsc->group ||
+	    be16_to_cpu(cmv->wAddress) != dsc->address)
+		goto bad2;
+
+	sc->data = be32_to_cpu(cmv->dwData[0]);
+	sc->data1 = be32_to_cpu(cmv->dwData[1]);
+	wake_up_cmv_ack(sc);
+	uea_leaves(INS_TO_USBDEV(sc));
+	return;
+
+bad2:
+	uea_err(INS_TO_USBDEV(sc), "unexpected cmv received, "
+			"Function : %d, Subfunction : %d\n",
+			E4_FUNCTION_TYPE(cmv->wFunction),
+			E4_FUNCTION_SUBTYPE(cmv->wFunction));
+	uea_leaves(INS_TO_USBDEV(sc));
+	return;
+}
+
+static void uea_schedule_load_page_e1(struct uea_softc *sc,
+						struct intr_pkt *intr)
+{
+	sc->pageno = intr->e1_bSwapPageNo;
+	sc->ovl = intr->e1_bOvl >> 4 | intr->e1_bOvl << 4;
+	schedule_work(&sc->task);
+}
+
+static void uea_schedule_load_page_e4(struct uea_softc *sc,
+						struct intr_pkt *intr)
+{
+	sc->pageno = intr->e4_bSwapPageNo;
+	schedule_work(&sc->task);
+}
+
+/*
+ * interrupt handler
+ */
+static void uea_intr(struct urb *urb)
+{
+	struct uea_softc *sc = urb->context;
+	struct intr_pkt *intr = urb->transfer_buffer;
+	int status = urb->status;
+
+	uea_enters(INS_TO_USBDEV(sc));
+
+	if (unlikely(status < 0)) {
+		uea_err(INS_TO_USBDEV(sc), "uea_intr() failed with %d\n",
+		       status);
+		return;
+	}
+
+	/* device-to-host interrupt */
+	if (intr->bType != 0x08 || sc->booting) {
+		uea_err(INS_TO_USBDEV(sc), "wrong interrupt\n");
+		goto resubmit;
+	}
+
+	switch (le16_to_cpu(intr->wInterrupt)) {
+	case INT_LOADSWAPPAGE:
+		sc->schedule_load_page(sc, intr);
+		break;
+
+	case INT_INCOMINGCMV:
+		sc->dispatch_cmv(sc, intr);
+		break;
+
+	default:
+		uea_err(INS_TO_USBDEV(sc), "unknown interrupt %u\n",
+		       le16_to_cpu(intr->wInterrupt));
+	}
+
+resubmit:
+	usb_submit_urb(sc->urb_int, GFP_ATOMIC);
+}
+
+/*
+ * Start the modem : init the data and start kernel thread
+ */
+static int uea_boot(struct uea_softc *sc, struct usb_interface *intf)
+{
+	struct intr_pkt *intr;
+	int ret = -ENOMEM;
+	int size;
+
+	uea_enters(INS_TO_USBDEV(sc));
+
+	if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
+		size = E4_INTR_PKT_SIZE;
+		sc->dispatch_cmv = uea_dispatch_cmv_e4;
+		sc->schedule_load_page = uea_schedule_load_page_e4;
+		sc->stat = uea_stat_e4;
+		sc->send_cmvs = uea_send_cmvs_e4;
+		INIT_WORK(&sc->task, uea_load_page_e4);
+	} else {
+		size = E1_INTR_PKT_SIZE;
+		sc->dispatch_cmv = uea_dispatch_cmv_e1;
+		sc->schedule_load_page = uea_schedule_load_page_e1;
+		sc->stat = uea_stat_e1;
+		sc->send_cmvs = uea_send_cmvs_e1;
+		INIT_WORK(&sc->task, uea_load_page_e1);
+	}
+
+	init_waitqueue_head(&sc->sync_q);
+
+	if (UEA_CHIP_VERSION(sc) == ADI930)
+		load_XILINX_firmware(sc);
+
+	if (intf->cur_altsetting->desc.bNumEndpoints < 1) {
+		ret = -ENODEV;
+		goto err0;
+	}
+
+	intr = kmalloc(size, GFP_KERNEL);
+	if (!intr)
+		goto err0;
+
+	sc->urb_int = usb_alloc_urb(0, GFP_KERNEL);
+	if (!sc->urb_int)
+		goto err1;
+
+	usb_fill_int_urb(sc->urb_int, sc->usb_dev,
+			 usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE),
+			 intr, size, uea_intr, sc,
+			 intf->cur_altsetting->endpoint[0].desc.bInterval);
+
+	ret = usb_submit_urb(sc->urb_int, GFP_KERNEL);
+	if (ret < 0) {
+		uea_err(INS_TO_USBDEV(sc),
+		       "urb submission failed with error %d\n", ret);
+		goto err1;
+	}
+
+	/* Create worker thread, but don't start it here.  Start it after
+	 * all usbatm generic initialization is done.
+	 */
+	sc->kthread = kthread_create(uea_kthread, sc, "ueagle-atm");
+	if (IS_ERR(sc->kthread)) {
+		uea_err(INS_TO_USBDEV(sc), "failed to create thread\n");
+		ret = PTR_ERR(sc->kthread);
+		goto err2;
+	}
+
+	uea_leaves(INS_TO_USBDEV(sc));
+	return 0;
+
+err2:
+	usb_kill_urb(sc->urb_int);
+err1:
+	usb_free_urb(sc->urb_int);
+	sc->urb_int = NULL;
+	kfree(intr);
+err0:
+	uea_leaves(INS_TO_USBDEV(sc));
+	return ret;
+}
+
+/*
+ * Stop the modem : kill kernel thread and free data
+ */
+static void uea_stop(struct uea_softc *sc)
+{
+	int ret;
+	uea_enters(INS_TO_USBDEV(sc));
+	ret = kthread_stop(sc->kthread);
+	uea_dbg(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret);
+
+	uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL);
+
+	usb_kill_urb(sc->urb_int);
+	kfree(sc->urb_int->transfer_buffer);
+	usb_free_urb(sc->urb_int);
+
+	/* flush the work item, when no one can schedule it */
+	flush_work(&sc->task);
+
+	release_firmware(sc->dsp_firm);
+	uea_leaves(INS_TO_USBDEV(sc));
+}
+
+/* syfs interface */
+static struct uea_softc *dev_to_uea(struct device *dev)
+{
+	struct usb_interface *intf;
+	struct usbatm_data *usbatm;
+
+	intf = to_usb_interface(dev);
+	if (!intf)
+		return NULL;
+
+	usbatm = usb_get_intfdata(intf);
+	if (!usbatm)
+		return NULL;
+
+	return usbatm->driver_data;
+}
+
+static ssize_t stat_status_show(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	int ret = -ENODEV;
+	struct uea_softc *sc;
+
+	mutex_lock(&uea_mutex);
+	sc = dev_to_uea(dev);
+	if (!sc)
+		goto out;
+	ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.state);
+out:
+	mutex_unlock(&uea_mutex);
+	return ret;
+}
+
+static ssize_t stat_status_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	int ret = -ENODEV;
+	struct uea_softc *sc;
+
+	mutex_lock(&uea_mutex);
+	sc = dev_to_uea(dev);
+	if (!sc)
+		goto out;
+	sc->reset = 1;
+	ret = count;
+out:
+	mutex_unlock(&uea_mutex);
+	return ret;
+}
+
+static DEVICE_ATTR_RW(stat_status);
+
+static ssize_t stat_human_status_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	int ret = -ENODEV;
+	int modem_state;
+	struct uea_softc *sc;
+
+	mutex_lock(&uea_mutex);
+	sc = dev_to_uea(dev);
+	if (!sc)
+		goto out;
+
+	if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
+		switch (sc->stats.phy.state) {
+		case 0x0:	/* not yet synchronized */
+		case 0x1:
+		case 0x3:
+		case 0x4:
+			modem_state = 0;
+			break;
+		case 0x5:	/* initialization */
+		case 0x6:
+		case 0x9:
+		case 0xa:
+			modem_state = 1;
+			break;
+		case 0x7:	/* operational */
+			modem_state = 2;
+			break;
+		case 0x2:	/* fail ... */
+			modem_state = 3;
+			break;
+		default:	/* unknown */
+			modem_state = 4;
+			break;
+		}
+	} else
+		modem_state = GET_STATUS(sc->stats.phy.state);
+
+	switch (modem_state) {
+	case 0:
+		ret = sprintf(buf, "Modem is booting\n");
+		break;
+	case 1:
+		ret = sprintf(buf, "Modem is initializing\n");
+		break;
+	case 2:
+		ret = sprintf(buf, "Modem is operational\n");
+		break;
+	case 3:
+		ret = sprintf(buf, "Modem synchronization failed\n");
+		break;
+	default:
+		ret = sprintf(buf, "Modem state is unknown\n");
+		break;
+	}
+out:
+	mutex_unlock(&uea_mutex);
+	return ret;
+}
+
+static DEVICE_ATTR_RO(stat_human_status);
+
+static ssize_t stat_delin_show(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	int ret = -ENODEV;
+	struct uea_softc *sc;
+	char *delin = "GOOD";
+
+	mutex_lock(&uea_mutex);
+	sc = dev_to_uea(dev);
+	if (!sc)
+		goto out;
+
+	if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
+		if (sc->stats.phy.flags & 0x4000)
+			delin = "RESET";
+		else if (sc->stats.phy.flags & 0x0001)
+			delin = "LOSS";
+	} else {
+		if (sc->stats.phy.flags & 0x0C00)
+			delin = "ERROR";
+		else if (sc->stats.phy.flags & 0x0030)
+			delin = "LOSS";
+	}
+
+	ret = sprintf(buf, "%s\n", delin);
+out:
+	mutex_unlock(&uea_mutex);
+	return ret;
+}
+
+static DEVICE_ATTR_RO(stat_delin);
+
+#define UEA_ATTR(name, reset)					\
+								\
+static ssize_t stat_##name##_show(struct device *dev,		\
+		struct device_attribute *attr, char *buf)	\
+{								\
+	int ret = -ENODEV;					\
+	struct uea_softc *sc;					\
+								\
+	mutex_lock(&uea_mutex);					\
+	sc = dev_to_uea(dev);					\
+	if (!sc)						\
+		goto out;					\
+	ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.name);	\
+	if (reset)						\
+		sc->stats.phy.name = 0;				\
+out:								\
+	mutex_unlock(&uea_mutex);				\
+	return ret;						\
+}								\
+								\
+static DEVICE_ATTR_RO(stat_##name)
+
+UEA_ATTR(mflags, 1);
+UEA_ATTR(vidcpe, 0);
+UEA_ATTR(usrate, 0);
+UEA_ATTR(dsrate, 0);
+UEA_ATTR(usattenuation, 0);
+UEA_ATTR(dsattenuation, 0);
+UEA_ATTR(usmargin, 0);
+UEA_ATTR(dsmargin, 0);
+UEA_ATTR(txflow, 0);
+UEA_ATTR(rxflow, 0);
+UEA_ATTR(uscorr, 0);
+UEA_ATTR(dscorr, 0);
+UEA_ATTR(usunc, 0);
+UEA_ATTR(dsunc, 0);
+UEA_ATTR(firmid, 0);
+
+/* Retrieve the device End System Identifier (MAC) */
+
+static int uea_getesi(struct uea_softc *sc, u_char *esi)
+{
+	unsigned char mac_str[2 * ETH_ALEN + 1];
+	int i;
+	if (usb_string
+	    (sc->usb_dev, sc->usb_dev->descriptor.iSerialNumber, mac_str,
+	     sizeof(mac_str)) != 2 * ETH_ALEN)
+		return 1;
+
+	for (i = 0; i < ETH_ALEN; i++)
+		esi[i] = hex_to_bin(mac_str[2 * i]) * 16 +
+			 hex_to_bin(mac_str[2 * i + 1]);
+
+	return 0;
+}
+
+/* ATM stuff */
+static int uea_atm_open(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
+{
+	struct uea_softc *sc = usbatm->driver_data;
+
+	return uea_getesi(sc, atm_dev->esi);
+}
+
+static int uea_heavy(struct usbatm_data *usbatm, struct usb_interface *intf)
+{
+	struct uea_softc *sc = usbatm->driver_data;
+
+	wait_event_interruptible(sc->sync_q, IS_OPERATIONAL(sc));
+
+	return 0;
+
+}
+
+static int claim_interface(struct usb_device *usb_dev,
+			   struct usbatm_data *usbatm, int ifnum)
+{
+	int ret;
+	struct usb_interface *intf = usb_ifnum_to_if(usb_dev, ifnum);
+
+	if (!intf) {
+		uea_err(usb_dev, "interface %d not found\n", ifnum);
+		return -ENODEV;
+	}
+
+	ret = usb_driver_claim_interface(&uea_driver, intf, usbatm);
+	if (ret != 0)
+		uea_err(usb_dev, "can't claim interface %d, error %d\n", ifnum,
+		       ret);
+	return ret;
+}
+
+static struct attribute *uea_attrs[] = {
+	&dev_attr_stat_status.attr,
+	&dev_attr_stat_mflags.attr,
+	&dev_attr_stat_human_status.attr,
+	&dev_attr_stat_delin.attr,
+	&dev_attr_stat_vidcpe.attr,
+	&dev_attr_stat_usrate.attr,
+	&dev_attr_stat_dsrate.attr,
+	&dev_attr_stat_usattenuation.attr,
+	&dev_attr_stat_dsattenuation.attr,
+	&dev_attr_stat_usmargin.attr,
+	&dev_attr_stat_dsmargin.attr,
+	&dev_attr_stat_txflow.attr,
+	&dev_attr_stat_rxflow.attr,
+	&dev_attr_stat_uscorr.attr,
+	&dev_attr_stat_dscorr.attr,
+	&dev_attr_stat_usunc.attr,
+	&dev_attr_stat_dsunc.attr,
+	&dev_attr_stat_firmid.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(uea);
+
+static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
+		   const struct usb_device_id *id)
+{
+	struct usb_device *usb = interface_to_usbdev(intf);
+	struct uea_softc *sc;
+	int ret, ifnum = intf->altsetting->desc.bInterfaceNumber;
+	unsigned int alt;
+
+	uea_enters(usb);
+
+	/* interface 0 is for firmware/monitoring */
+	if (ifnum != UEA_INTR_IFACE_NO)
+		return -ENODEV;
+
+	usbatm->flags = (sync_wait[modem_index] ? 0 : UDSL_SKIP_HEAVY_INIT);
+
+	/* interface 1 is for outbound traffic */
+	ret = claim_interface(usb, usbatm, UEA_US_IFACE_NO);
+	if (ret < 0)
+		return ret;
+
+	/* ADI930 has only 2 interfaces and inbound traffic is on interface 1 */
+	if (UEA_CHIP_VERSION(id) != ADI930) {
+		/* interface 2 is for inbound traffic */
+		ret = claim_interface(usb, usbatm, UEA_DS_IFACE_NO);
+		if (ret < 0)
+			return ret;
+	}
+
+	sc = kzalloc(sizeof(struct uea_softc), GFP_KERNEL);
+	if (!sc)
+		return -ENOMEM;
+
+	sc->usb_dev = usb;
+	usbatm->driver_data = sc;
+	sc->usbatm = usbatm;
+	sc->modem_index = (modem_index < NB_MODEM) ? modem_index++ : 0;
+	sc->driver_info = id->driver_info;
+
+	/* first try to use module parameter */
+	if (annex[sc->modem_index] == 1)
+		sc->annex = ANNEXA;
+	else if (annex[sc->modem_index] == 2)
+		sc->annex = ANNEXB;
+	/* try to autodetect annex */
+	else if (sc->driver_info & AUTO_ANNEX_A)
+		sc->annex = ANNEXA;
+	else if (sc->driver_info & AUTO_ANNEX_B)
+		sc->annex = ANNEXB;
+	else
+		sc->annex = (le16_to_cpu
+		(sc->usb_dev->descriptor.bcdDevice) & 0x80) ? ANNEXB : ANNEXA;
+
+	alt = altsetting[sc->modem_index];
+	/* ADI930 don't support iso */
+	if (UEA_CHIP_VERSION(id) != ADI930 && alt > 0) {
+		if (alt <= 8 &&
+			usb_set_interface(usb, UEA_DS_IFACE_NO, alt) == 0) {
+			uea_dbg(usb, "set alternate %u for 2 interface\n", alt);
+			uea_info(usb, "using iso mode\n");
+			usbatm->flags |= UDSL_USE_ISOC | UDSL_IGNORE_EILSEQ;
+		} else {
+			uea_err(usb, "setting alternate %u failed for "
+					"2 interface, using bulk mode\n", alt);
+		}
+	}
+
+	ret = uea_boot(sc, intf);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	kfree(sc);
+	return ret;
+}
+
+static void uea_unbind(struct usbatm_data *usbatm, struct usb_interface *intf)
+{
+	struct uea_softc *sc = usbatm->driver_data;
+
+	uea_stop(sc);
+	kfree(sc);
+}
+
+static struct usbatm_driver uea_usbatm_driver = {
+	.driver_name = "ueagle-atm",
+	.bind = uea_bind,
+	.atm_start = uea_atm_open,
+	.unbind = uea_unbind,
+	.heavy_init = uea_heavy,
+	.bulk_in = UEA_BULK_DATA_PIPE,
+	.bulk_out = UEA_BULK_DATA_PIPE,
+	.isoc_in = UEA_ISO_DATA_PIPE,
+};
+
+static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *usb = interface_to_usbdev(intf);
+	int ret;
+
+	uea_enters(usb);
+	uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) Rev (%#X): %s\n",
+		le16_to_cpu(usb->descriptor.idVendor),
+		le16_to_cpu(usb->descriptor.idProduct),
+		le16_to_cpu(usb->descriptor.bcdDevice),
+		chip_name[UEA_CHIP_VERSION(id)]);
+
+	usb_reset_device(usb);
+
+	if (UEA_IS_PREFIRM(id))
+		return uea_load_firmware(usb, UEA_CHIP_VERSION(id));
+
+	ret = usbatm_usb_probe(intf, id, &uea_usbatm_driver);
+	if (ret == 0) {
+		struct usbatm_data *usbatm = usb_get_intfdata(intf);
+		struct uea_softc *sc = usbatm->driver_data;
+
+		/* Ensure carrier is initialized to off as early as possible */
+		UPDATE_ATM_SIGNAL(ATM_PHY_SIG_LOST);
+
+		/* Only start the worker thread when all init is done */
+		wake_up_process(sc->kthread);
+	}
+
+	return ret;
+}
+
+static void uea_disconnect(struct usb_interface *intf)
+{
+	struct usb_device *usb = interface_to_usbdev(intf);
+	int ifnum = intf->altsetting->desc.bInterfaceNumber;
+	uea_enters(usb);
+
+	/* ADI930 has 2 interfaces and eagle 3 interfaces.
+	 * Pre-firmware device has one interface
+	 */
+	if (usb->config->desc.bNumInterfaces != 1 && ifnum == 0) {
+		mutex_lock(&uea_mutex);
+		usbatm_usb_disconnect(intf);
+		mutex_unlock(&uea_mutex);
+		uea_info(usb, "ADSL device removed\n");
+	}
+
+	uea_leaves(usb);
+}
+
+/*
+ * List of supported VID/PID
+ */
+static const struct usb_device_id uea_ids[] = {
+	{USB_DEVICE(ANALOG_VID,	ADI930_PID_PREFIRM),
+		.driver_info = ADI930 | PREFIRM},
+	{USB_DEVICE(ANALOG_VID,	ADI930_PID_PSTFIRM),
+		.driver_info = ADI930 | PSTFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_I_PID_PREFIRM),
+		.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_I_PID_PSTFIRM),
+		.driver_info = EAGLE_I | PSTFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_II_PID_PREFIRM),
+		.driver_info = EAGLE_II | PREFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_II_PID_PSTFIRM),
+		.driver_info = EAGLE_II | PSTFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_IIC_PID_PREFIRM),
+		.driver_info = EAGLE_II | PREFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_IIC_PID_PSTFIRM),
+		.driver_info = EAGLE_II | PSTFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_III_PID_PREFIRM),
+		.driver_info = EAGLE_III | PREFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_III_PID_PSTFIRM),
+		.driver_info = EAGLE_III | PSTFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_IV_PID_PREFIRM),
+		.driver_info = EAGLE_IV | PREFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_IV_PID_PSTFIRM),
+		.driver_info = EAGLE_IV | PSTFIRM},
+	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_I_A_PID_PREFIRM),
+		.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_I_A_PID_PSTFIRM),
+		.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
+	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_I_B_PID_PREFIRM),
+		.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_I_B_PID_PSTFIRM),
+		.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
+	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_II_A_PID_PREFIRM),
+		.driver_info = EAGLE_II | PREFIRM},
+	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_II_A_PID_PSTFIRM),
+		.driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_A},
+	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_II_B_PID_PREFIRM),
+		.driver_info = EAGLE_II | PREFIRM},
+	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_II_B_PID_PSTFIRM),
+		.driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_B},
+	{USB_DEVICE(ELSA_VID,	ELSA_PID_PREFIRM),
+		.driver_info = ADI930 | PREFIRM},
+	{USB_DEVICE(ELSA_VID,	ELSA_PID_PSTFIRM),
+		.driver_info = ADI930 | PSTFIRM},
+	{USB_DEVICE(ELSA_VID,	ELSA_PID_A_PREFIRM),
+		.driver_info = ADI930 | PREFIRM},
+	{USB_DEVICE(ELSA_VID,	ELSA_PID_A_PSTFIRM),
+		.driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_A},
+	{USB_DEVICE(ELSA_VID,	ELSA_PID_B_PREFIRM),
+		.driver_info = ADI930 | PREFIRM},
+	{USB_DEVICE(ELSA_VID,	ELSA_PID_B_PSTFIRM),
+		.driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_B},
+	{USB_DEVICE(USR_VID,	MILLER_A_PID_PREFIRM),
+		.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(USR_VID,	MILLER_A_PID_PSTFIRM),
+		.driver_info = EAGLE_I | PSTFIRM  | AUTO_ANNEX_A},
+	{USB_DEVICE(USR_VID,	MILLER_B_PID_PREFIRM),
+		.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(USR_VID,	MILLER_B_PID_PSTFIRM),
+		.driver_info = EAGLE_I | PSTFIRM  | AUTO_ANNEX_B},
+	{USB_DEVICE(USR_VID,	HEINEKEN_A_PID_PREFIRM),
+		.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(USR_VID,	HEINEKEN_A_PID_PSTFIRM),
+		.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
+	{USB_DEVICE(USR_VID,	HEINEKEN_B_PID_PREFIRM),
+		.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(USR_VID,	HEINEKEN_B_PID_PSTFIRM),
+		.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
+	{}
+};
+
+/*
+ * USB driver descriptor
+ */
+static struct usb_driver uea_driver = {
+	.name = "ueagle-atm",
+	.id_table = uea_ids,
+	.probe = uea_probe,
+	.disconnect = uea_disconnect,
+	.dev_groups = uea_groups,
+};
+
+MODULE_DEVICE_TABLE(usb, uea_ids);
+
+module_usb_driver(uea_driver);
+
+MODULE_AUTHOR("Damien Bergamini/Matthieu Castet/Stanislaw W. Gruszka");
+MODULE_DESCRIPTION("ADI 930/Eagle USB ADSL Modem driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_FIRMWARE(EAGLE_FIRMWARE);
+MODULE_FIRMWARE(ADI930_FIRMWARE);
+MODULE_FIRMWARE(EAGLE_I_FIRMWARE);
+MODULE_FIRMWARE(EAGLE_II_FIRMWARE);
+MODULE_FIRMWARE(EAGLE_III_FIRMWARE);
+MODULE_FIRMWARE(EAGLE_IV_FIRMWARE);
+MODULE_FIRMWARE(DSP4I_FIRMWARE);
+MODULE_FIRMWARE(DSP4P_FIRMWARE);
+MODULE_FIRMWARE(DSP9I_FIRMWARE);
+MODULE_FIRMWARE(DSP9P_FIRMWARE);
+MODULE_FIRMWARE(DSPEI_FIRMWARE);
+MODULE_FIRMWARE(DSPEP_FIRMWARE);
+MODULE_FIRMWARE(FPGA930_FIRMWARE);
+MODULE_FIRMWARE(CMV4P_FIRMWARE);
+MODULE_FIRMWARE(CMV4PV2_FIRMWARE);
+MODULE_FIRMWARE(CMV4I_FIRMWARE);
+MODULE_FIRMWARE(CMV4IV2_FIRMWARE);
+MODULE_FIRMWARE(CMV9P_FIRMWARE);
+MODULE_FIRMWARE(CMV9PV2_FIRMWARE);
+MODULE_FIRMWARE(CMV9I_FIRMWARE);
+MODULE_FIRMWARE(CMV9IV2_FIRMWARE);
+MODULE_FIRMWARE(CMVEP_FIRMWARE);
+MODULE_FIRMWARE(CMVEPV2_FIRMWARE);
+MODULE_FIRMWARE(CMVEI_FIRMWARE);
+MODULE_FIRMWARE(CMVEIV2_FIRMWARE);
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
new file mode 100644
index 000000000..1cdb8758a
--- /dev/null
+++ b/drivers/usb/atm/usbatm.c
@@ -0,0 +1,1328 @@
+// SPDX-License-Identifier: GPL-2.0+
+/******************************************************************************
+ *  usbatm.c - Generic USB xDSL driver core
+ *
+ *  Copyright (C) 2001, Alcatel
+ *  Copyright (C) 2003, Duncan Sands, SolNegro, Josep Comas
+ *  Copyright (C) 2004, David Woodhouse, Roman Kagan
+ ******************************************************************************/
+
+/*
+ *  Written by Johan Verrept, Duncan Sands (duncan.sands@free.fr) and David Woodhouse
+ *
+ *  1.7+:	- See the check-in logs
+ *
+ *  1.6:	- No longer opens a connection if the firmware is not loaded
+ *  		- Added support for the speedtouch 330
+ *  		- Removed the limit on the number of devices
+ *  		- Module now autoloads on device plugin
+ *  		- Merged relevant parts of sarlib
+ *  		- Replaced the kernel thread with a tasklet
+ *  		- New packet transmission code
+ *  		- Changed proc file contents
+ *  		- Fixed all known SMP races
+ *  		- Many fixes and cleanups
+ *  		- Various fixes by Oliver Neukum (oliver@neukum.name)
+ *
+ *  1.5A:	- Version for inclusion in 2.5 series kernel
+ *		- Modifications by Richard Purdie (rpurdie@rpsys.net)
+ *		- made compatible with kernel 2.5.6 onwards by changing
+ *		usbatm_usb_send_data_context->urb to a pointer and adding code
+ *		to alloc and free it
+ *		- remove_wait_queue() added to usbatm_atm_processqueue_thread()
+ *
+ *  1.5:	- fixed memory leak when atmsar_decode_aal5 returned NULL.
+ *		(reported by stephen.robinson@zen.co.uk)
+ *
+ *  1.4:	- changed the spin_lock() under interrupt to spin_lock_irqsave()
+ *		- unlink all active send urbs of a vcc that is being closed.
+ *
+ *  1.3.1:	- added the version number
+ *
+ *  1.3:	- Added multiple send urb support
+ *		- fixed memory leak and vcc->tx_inuse starvation bug
+ *		  when not enough memory left in vcc.
+ *
+ *  1.2:	- Fixed race condition in usbatm_usb_send_data()
+ *  1.1:	- Turned off packet debugging
+ *
+ */
+
+#include "usbatm.h"
+
+#include <linux/uaccess.h>
+#include <linux/crc32.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/netdevice.h>
+#include <linux/proc_fs.h>
+#include <linux/sched/signal.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/kthread.h>
+#include <linux/ratelimit.h>
+
+#ifdef VERBOSE_DEBUG
+static int usbatm_print_packet(struct usbatm_data *instance, const unsigned char *data, int len);
+#define PACKETDEBUG(arg...)	usbatm_print_packet(arg)
+#define vdbg(arg...)		dev_dbg(arg)
+#else
+#define PACKETDEBUG(arg...)
+#define vdbg(arg...)
+#endif
+
+#define DRIVER_AUTHOR	"Johan Verrept, Duncan Sands <duncan.sands@free.fr>"
+#define DRIVER_DESC	"Generic USB ATM/DSL I/O"
+
+static const char usbatm_driver_name[] = "usbatm";
+
+#define UDSL_MAX_RCV_URBS		16
+#define UDSL_MAX_SND_URBS		16
+#define UDSL_MAX_BUF_SIZE		65536
+#define UDSL_DEFAULT_RCV_URBS		4
+#define UDSL_DEFAULT_SND_URBS		4
+#define UDSL_DEFAULT_RCV_BUF_SIZE	3392	/* 64 * ATM_CELL_SIZE */
+#define UDSL_DEFAULT_SND_BUF_SIZE	3392	/* 64 * ATM_CELL_SIZE */
+
+#define ATM_CELL_HEADER			(ATM_CELL_SIZE - ATM_CELL_PAYLOAD)
+
+#define THROTTLE_MSECS			100	/* delay to recover processing after urb submission fails */
+
+static unsigned int num_rcv_urbs = UDSL_DEFAULT_RCV_URBS;
+static unsigned int num_snd_urbs = UDSL_DEFAULT_SND_URBS;
+static unsigned int rcv_buf_bytes = UDSL_DEFAULT_RCV_BUF_SIZE;
+static unsigned int snd_buf_bytes = UDSL_DEFAULT_SND_BUF_SIZE;
+
+module_param(num_rcv_urbs, uint, S_IRUGO);
+MODULE_PARM_DESC(num_rcv_urbs,
+		 "Number of urbs used for reception (range: 0-"
+		 __MODULE_STRING(UDSL_MAX_RCV_URBS) ", default: "
+		 __MODULE_STRING(UDSL_DEFAULT_RCV_URBS) ")");
+
+module_param(num_snd_urbs, uint, S_IRUGO);
+MODULE_PARM_DESC(num_snd_urbs,
+		 "Number of urbs used for transmission (range: 0-"
+		 __MODULE_STRING(UDSL_MAX_SND_URBS) ", default: "
+		 __MODULE_STRING(UDSL_DEFAULT_SND_URBS) ")");
+
+module_param(rcv_buf_bytes, uint, S_IRUGO);
+MODULE_PARM_DESC(rcv_buf_bytes,
+		 "Size of the buffers used for reception, in bytes (range: 1-"
+		 __MODULE_STRING(UDSL_MAX_BUF_SIZE) ", default: "
+		 __MODULE_STRING(UDSL_DEFAULT_RCV_BUF_SIZE) ")");
+
+module_param(snd_buf_bytes, uint, S_IRUGO);
+MODULE_PARM_DESC(snd_buf_bytes,
+		 "Size of the buffers used for transmission, in bytes (range: 1-"
+		 __MODULE_STRING(UDSL_MAX_BUF_SIZE) ", default: "
+		 __MODULE_STRING(UDSL_DEFAULT_SND_BUF_SIZE) ")");
+
+
+/* receive */
+
+struct usbatm_vcc_data {
+	/* vpi/vci lookup */
+	struct list_head list;
+	short vpi;
+	int vci;
+	struct atm_vcc *vcc;
+
+	/* raw cell reassembly */
+	struct sk_buff *sarb;
+};
+
+
+/* send */
+
+struct usbatm_control {
+	struct atm_skb_data atm;
+	u32 len;
+	u32 crc;
+};
+
+#define UDSL_SKB(x)		((struct usbatm_control *)(x)->cb)
+
+
+/* ATM */
+
+static void usbatm_atm_dev_close(struct atm_dev *atm_dev);
+static int usbatm_atm_open(struct atm_vcc *vcc);
+static void usbatm_atm_close(struct atm_vcc *vcc);
+static int usbatm_atm_ioctl(struct atm_dev *atm_dev, unsigned int cmd, void __user *arg);
+static int usbatm_atm_send(struct atm_vcc *vcc, struct sk_buff *skb);
+static int usbatm_atm_proc_read(struct atm_dev *atm_dev, loff_t *pos, char *page);
+
+static const struct atmdev_ops usbatm_atm_devops = {
+	.dev_close	= usbatm_atm_dev_close,
+	.open		= usbatm_atm_open,
+	.close		= usbatm_atm_close,
+	.ioctl		= usbatm_atm_ioctl,
+	.send		= usbatm_atm_send,
+	.proc_read	= usbatm_atm_proc_read,
+	.owner		= THIS_MODULE,
+};
+
+
+/***********
+**  misc  **
+***********/
+
+static inline unsigned int usbatm_pdu_length(unsigned int length)
+{
+	length += ATM_CELL_PAYLOAD - 1 + ATM_AAL5_TRAILER;
+	return length - length % ATM_CELL_PAYLOAD;
+}
+
+static inline void usbatm_pop(struct atm_vcc *vcc, struct sk_buff *skb)
+{
+	if (vcc->pop)
+		vcc->pop(vcc, skb);
+	else
+		dev_kfree_skb_any(skb);
+}
+
+
+/***********
+**  urbs  **
+************/
+
+static struct urb *usbatm_pop_urb(struct usbatm_channel *channel)
+{
+	struct urb *urb;
+
+	spin_lock_irq(&channel->lock);
+	if (list_empty(&channel->list)) {
+		spin_unlock_irq(&channel->lock);
+		return NULL;
+	}
+
+	urb = list_entry(channel->list.next, struct urb, urb_list);
+	list_del(&urb->urb_list);
+	spin_unlock_irq(&channel->lock);
+
+	return urb;
+}
+
+static int usbatm_submit_urb(struct urb *urb)
+{
+	struct usbatm_channel *channel = urb->context;
+	int ret;
+
+	/* vdbg("%s: submitting urb 0x%p, size %u",
+	     __func__, urb, urb->transfer_buffer_length); */
+
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	if (ret) {
+		if (printk_ratelimit())
+			atm_warn(channel->usbatm, "%s: urb 0x%p submission failed (%d)!\n",
+				__func__, urb, ret);
+
+		/* consider all errors transient and return the buffer back to the queue */
+		urb->status = -EAGAIN;
+		spin_lock_irq(&channel->lock);
+
+		/* must add to the front when sending; doesn't matter when receiving */
+		list_add(&urb->urb_list, &channel->list);
+
+		spin_unlock_irq(&channel->lock);
+
+		/* make sure the channel doesn't stall */
+		mod_timer(&channel->delay, jiffies + msecs_to_jiffies(THROTTLE_MSECS));
+	}
+
+	return ret;
+}
+
+static void usbatm_complete(struct urb *urb)
+{
+	struct usbatm_channel *channel = urb->context;
+	unsigned long flags;
+	int status = urb->status;
+
+	/* vdbg("%s: urb 0x%p, status %d, actual_length %d",
+	     __func__, urb, status, urb->actual_length); */
+
+	/* Can be invoked from task context, protect against interrupts */
+	spin_lock_irqsave(&channel->lock, flags);
+
+	/* must add to the back when receiving; doesn't matter when sending */
+	list_add_tail(&urb->urb_list, &channel->list);
+
+	spin_unlock_irqrestore(&channel->lock, flags);
+
+	if (unlikely(status) &&
+			(!(channel->usbatm->flags & UDSL_IGNORE_EILSEQ) ||
+			 status != -EILSEQ)) {
+		if (status == -ESHUTDOWN)
+			return;
+
+		if (printk_ratelimit())
+			atm_warn(channel->usbatm, "%s: urb 0x%p failed (%d)!\n",
+				__func__, urb, status);
+		/* throttle processing in case of an error */
+		mod_timer(&channel->delay, jiffies + msecs_to_jiffies(THROTTLE_MSECS));
+	} else
+		tasklet_schedule(&channel->tasklet);
+}
+
+
+/*************
+**  decode  **
+*************/
+
+static inline struct usbatm_vcc_data *usbatm_find_vcc(struct usbatm_data *instance,
+						  short vpi, int vci)
+{
+	struct usbatm_vcc_data *vcc_data;
+
+	list_for_each_entry(vcc_data, &instance->vcc_list, list)
+		if ((vcc_data->vci == vci) && (vcc_data->vpi == vpi))
+			return vcc_data;
+	return NULL;
+}
+
+static void usbatm_extract_one_cell(struct usbatm_data *instance, unsigned char *source)
+{
+	struct atm_vcc *vcc;
+	struct sk_buff *sarb;
+	short vpi = ((source[0] & 0x0f) << 4)  | (source[1] >> 4);
+	int vci = ((source[1] & 0x0f) << 12) | (source[2] << 4) | (source[3] >> 4);
+	u8 pti = ((source[3] & 0xe) >> 1);
+
+	if ((vci != instance->cached_vci) || (vpi != instance->cached_vpi)) {
+		instance->cached_vpi = vpi;
+		instance->cached_vci = vci;
+
+		instance->cached_vcc = usbatm_find_vcc(instance, vpi, vci);
+
+		if (!instance->cached_vcc)
+			atm_rldbg(instance, "%s: unknown vpi/vci (%hd/%d)!\n", __func__, vpi, vci);
+	}
+
+	if (!instance->cached_vcc)
+		return;
+
+	vcc = instance->cached_vcc->vcc;
+
+	/* OAM F5 end-to-end */
+	if (pti == ATM_PTI_E2EF5) {
+		if (printk_ratelimit())
+			atm_warn(instance, "%s: OAM not supported (vpi %d, vci %d)!\n",
+				__func__, vpi, vci);
+		atomic_inc(&vcc->stats->rx_err);
+		return;
+	}
+
+	sarb = instance->cached_vcc->sarb;
+
+	if (sarb->tail + ATM_CELL_PAYLOAD > sarb->end) {
+		atm_rldbg(instance, "%s: buffer overrun (sarb->len %u, vcc: 0x%p)!\n",
+				__func__, sarb->len, vcc);
+		/* discard cells already received */
+		skb_trim(sarb, 0);
+	}
+
+	memcpy(skb_tail_pointer(sarb), source + ATM_CELL_HEADER, ATM_CELL_PAYLOAD);
+	__skb_put(sarb, ATM_CELL_PAYLOAD);
+
+	if (pti & 1) {
+		struct sk_buff *skb;
+		unsigned int length;
+		unsigned int pdu_length;
+
+		length = (source[ATM_CELL_SIZE - 6] << 8) + source[ATM_CELL_SIZE - 5];
+
+		/* guard against overflow */
+		if (length > ATM_MAX_AAL5_PDU) {
+			atm_rldbg(instance, "%s: bogus length %u (vcc: 0x%p)!\n",
+				  __func__, length, vcc);
+			atomic_inc(&vcc->stats->rx_err);
+			goto out;
+		}
+
+		pdu_length = usbatm_pdu_length(length);
+
+		if (sarb->len < pdu_length) {
+			atm_rldbg(instance, "%s: bogus pdu_length %u (sarb->len: %u, vcc: 0x%p)!\n",
+				  __func__, pdu_length, sarb->len, vcc);
+			atomic_inc(&vcc->stats->rx_err);
+			goto out;
+		}
+
+		if (crc32_be(~0, skb_tail_pointer(sarb) - pdu_length, pdu_length) != 0xc704dd7b) {
+			atm_rldbg(instance, "%s: packet failed crc check (vcc: 0x%p)!\n",
+				  __func__, vcc);
+			atomic_inc(&vcc->stats->rx_err);
+			goto out;
+		}
+
+		vdbg(&instance->usb_intf->dev,
+		     "%s: got packet (length: %u, pdu_length: %u, vcc: 0x%p)",
+		     __func__, length, pdu_length, vcc);
+
+		skb = dev_alloc_skb(length);
+		if (!skb) {
+			if (printk_ratelimit())
+				atm_err(instance, "%s: no memory for skb (length: %u)!\n",
+					__func__, length);
+			atomic_inc(&vcc->stats->rx_drop);
+			goto out;
+		}
+
+		vdbg(&instance->usb_intf->dev,
+		     "%s: allocated new sk_buff (skb: 0x%p, skb->truesize: %u)",
+		     __func__, skb, skb->truesize);
+
+		if (!atm_charge(vcc, skb->truesize)) {
+			atm_rldbg(instance, "%s: failed atm_charge (skb->truesize: %u)!\n",
+				  __func__, skb->truesize);
+			dev_kfree_skb_any(skb);
+			goto out;	/* atm_charge increments rx_drop */
+		}
+
+		skb_copy_to_linear_data(skb,
+					skb_tail_pointer(sarb) - pdu_length,
+					length);
+		__skb_put(skb, length);
+
+		vdbg(&instance->usb_intf->dev,
+		     "%s: sending skb 0x%p, skb->len %u, skb->truesize %u",
+		     __func__, skb, skb->len, skb->truesize);
+
+		PACKETDEBUG(instance, skb->data, skb->len);
+
+		vcc->push(vcc, skb);
+
+		atomic_inc(&vcc->stats->rx);
+	out:
+		skb_trim(sarb, 0);
+	}
+}
+
+static void usbatm_extract_cells(struct usbatm_data *instance,
+		unsigned char *source, unsigned int avail_data)
+{
+	unsigned int stride = instance->rx_channel.stride;
+	unsigned int buf_usage = instance->buf_usage;
+
+	/* extract cells from incoming data, taking into account that
+	 * the length of avail data may not be a multiple of stride */
+
+	if (buf_usage > 0) {
+		/* we have a partially received atm cell */
+		unsigned char *cell_buf = instance->cell_buf;
+		unsigned int space_left = stride - buf_usage;
+
+		if (avail_data >= space_left) {
+			/* add new data and process cell */
+			memcpy(cell_buf + buf_usage, source, space_left);
+			source += space_left;
+			avail_data -= space_left;
+			usbatm_extract_one_cell(instance, cell_buf);
+			instance->buf_usage = 0;
+		} else {
+			/* not enough data to fill the cell */
+			memcpy(cell_buf + buf_usage, source, avail_data);
+			instance->buf_usage = buf_usage + avail_data;
+			return;
+		}
+	}
+
+	for (; avail_data >= stride; avail_data -= stride, source += stride)
+		usbatm_extract_one_cell(instance, source);
+
+	if (avail_data > 0) {
+		/* length was not a multiple of stride -
+		 * save remaining data for next call */
+		memcpy(instance->cell_buf, source, avail_data);
+		instance->buf_usage = avail_data;
+	}
+}
+
+
+/*************
+**  encode  **
+*************/
+
+static unsigned int usbatm_write_cells(struct usbatm_data *instance,
+				       struct sk_buff *skb,
+				       u8 *target, unsigned int avail_space)
+{
+	struct usbatm_control *ctrl = UDSL_SKB(skb);
+	struct atm_vcc *vcc = ctrl->atm.vcc;
+	unsigned int bytes_written;
+	unsigned int stride = instance->tx_channel.stride;
+
+	for (bytes_written = 0; bytes_written < avail_space && ctrl->len;
+	     bytes_written += stride, target += stride) {
+		unsigned int data_len = min_t(unsigned int, skb->len, ATM_CELL_PAYLOAD);
+		unsigned int left = ATM_CELL_PAYLOAD - data_len;
+		u8 *ptr = target;
+
+		ptr[0] = vcc->vpi >> 4;
+		ptr[1] = (vcc->vpi << 4) | (vcc->vci >> 12);
+		ptr[2] = vcc->vci >> 4;
+		ptr[3] = vcc->vci << 4;
+		ptr[4] = 0xec;
+		ptr += ATM_CELL_HEADER;
+
+		skb_copy_from_linear_data(skb, ptr, data_len);
+		ptr += data_len;
+		__skb_pull(skb, data_len);
+
+		if (!left)
+			continue;
+
+		memset(ptr, 0, left);
+
+		if (left >= ATM_AAL5_TRAILER) {	/* trailer will go in this cell */
+			u8 *trailer = target + ATM_CELL_SIZE - ATM_AAL5_TRAILER;
+			/* trailer[0] = 0;		UU = 0 */
+			/* trailer[1] = 0;		CPI = 0 */
+			trailer[2] = ctrl->len >> 8;
+			trailer[3] = ctrl->len;
+
+			ctrl->crc = ~crc32_be(ctrl->crc, ptr, left - 4);
+
+			trailer[4] = ctrl->crc >> 24;
+			trailer[5] = ctrl->crc >> 16;
+			trailer[6] = ctrl->crc >> 8;
+			trailer[7] = ctrl->crc;
+
+			target[3] |= 0x2;	/* adjust PTI */
+
+			ctrl->len = 0;		/* tag this skb finished */
+		} else
+			ctrl->crc = crc32_be(ctrl->crc, ptr, left);
+	}
+
+	return bytes_written;
+}
+
+
+/**************
+**  receive  **
+**************/
+
+static void usbatm_rx_process(struct tasklet_struct *t)
+{
+	struct usbatm_data *instance = from_tasklet(instance, t,
+						    rx_channel.tasklet);
+	struct urb *urb;
+
+	while ((urb = usbatm_pop_urb(&instance->rx_channel))) {
+		vdbg(&instance->usb_intf->dev,
+		     "%s: processing urb 0x%p", __func__, urb);
+
+		if (usb_pipeisoc(urb->pipe)) {
+			unsigned char *merge_start = NULL;
+			unsigned int merge_length = 0;
+			const unsigned int packet_size = instance->rx_channel.packet_size;
+			int i;
+
+			for (i = 0; i < urb->number_of_packets; i++) {
+				if (!urb->iso_frame_desc[i].status) {
+					unsigned int actual_length = urb->iso_frame_desc[i].actual_length;
+
+					if (!merge_length)
+						merge_start = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+					merge_length += actual_length;
+					if (merge_length && (actual_length < packet_size)) {
+						usbatm_extract_cells(instance, merge_start, merge_length);
+						merge_length = 0;
+					}
+				} else {
+					atm_rldbg(instance, "%s: status %d in frame %d!\n", __func__, urb->status, i);
+					if (merge_length)
+						usbatm_extract_cells(instance, merge_start, merge_length);
+					merge_length = 0;
+					instance->buf_usage = 0;
+				}
+			}
+
+			if (merge_length)
+				usbatm_extract_cells(instance, merge_start, merge_length);
+		} else
+			if (!urb->status)
+				usbatm_extract_cells(instance, urb->transfer_buffer, urb->actual_length);
+			else
+				instance->buf_usage = 0;
+
+		if (usbatm_submit_urb(urb))
+			return;
+	}
+}
+
+
+/***********
+**  send  **
+***********/
+
+static void usbatm_tx_process(struct tasklet_struct *t)
+{
+	struct usbatm_data *instance = from_tasklet(instance, t,
+						    tx_channel.tasklet);
+	struct sk_buff *skb = instance->current_skb;
+	struct urb *urb = NULL;
+	const unsigned int buf_size = instance->tx_channel.buf_size;
+	unsigned int bytes_written = 0;
+	u8 *buffer = NULL;
+
+	if (!skb)
+		skb = skb_dequeue(&instance->sndqueue);
+
+	while (skb) {
+		if (!urb) {
+			urb = usbatm_pop_urb(&instance->tx_channel);
+			if (!urb)
+				break;		/* no more senders */
+			buffer = urb->transfer_buffer;
+			bytes_written = (urb->status == -EAGAIN) ?
+				urb->transfer_buffer_length : 0;
+		}
+
+		bytes_written += usbatm_write_cells(instance, skb,
+						  buffer + bytes_written,
+						  buf_size - bytes_written);
+
+		vdbg(&instance->usb_intf->dev,
+		     "%s: wrote %u bytes from skb 0x%p to urb 0x%p",
+		     __func__, bytes_written, skb, urb);
+
+		if (!UDSL_SKB(skb)->len) {
+			struct atm_vcc *vcc = UDSL_SKB(skb)->atm.vcc;
+
+			usbatm_pop(vcc, skb);
+			atomic_inc(&vcc->stats->tx);
+
+			skb = skb_dequeue(&instance->sndqueue);
+		}
+
+		if (bytes_written == buf_size || (!skb && bytes_written)) {
+			urb->transfer_buffer_length = bytes_written;
+
+			if (usbatm_submit_urb(urb))
+				break;
+			urb = NULL;
+		}
+	}
+
+	instance->current_skb = skb;
+}
+
+static void usbatm_cancel_send(struct usbatm_data *instance,
+			       struct atm_vcc *vcc)
+{
+	struct sk_buff *skb, *n;
+
+	spin_lock_irq(&instance->sndqueue.lock);
+	skb_queue_walk_safe(&instance->sndqueue, skb, n) {
+		if (UDSL_SKB(skb)->atm.vcc == vcc) {
+			atm_dbg(instance, "%s: popping skb 0x%p\n", __func__, skb);
+			__skb_unlink(skb, &instance->sndqueue);
+			usbatm_pop(vcc, skb);
+		}
+	}
+	spin_unlock_irq(&instance->sndqueue.lock);
+
+	tasklet_disable(&instance->tx_channel.tasklet);
+	if ((skb = instance->current_skb) && (UDSL_SKB(skb)->atm.vcc == vcc)) {
+		atm_dbg(instance, "%s: popping current skb (0x%p)\n", __func__, skb);
+		instance->current_skb = NULL;
+		usbatm_pop(vcc, skb);
+	}
+	tasklet_enable(&instance->tx_channel.tasklet);
+}
+
+static int usbatm_atm_send(struct atm_vcc *vcc, struct sk_buff *skb)
+{
+	struct usbatm_data *instance = vcc->dev->dev_data;
+	struct usbatm_control *ctrl = UDSL_SKB(skb);
+	int err;
+
+	/* racy disconnection check - fine */
+	if (!instance || instance->disconnected) {
+#ifdef VERBOSE_DEBUG
+		printk_ratelimited(KERN_DEBUG "%s: %s!\n", __func__, instance ? "disconnected" : "NULL instance");
+#endif
+		err = -ENODEV;
+		goto fail;
+	}
+
+	if (vcc->qos.aal != ATM_AAL5) {
+		atm_rldbg(instance, "%s: unsupported ATM type %d!\n", __func__, vcc->qos.aal);
+		err = -EINVAL;
+		goto fail;
+	}
+
+	if (skb->len > ATM_MAX_AAL5_PDU) {
+		atm_rldbg(instance, "%s: packet too long (%d vs %d)!\n",
+				__func__, skb->len, ATM_MAX_AAL5_PDU);
+		err = -EINVAL;
+		goto fail;
+	}
+
+	PACKETDEBUG(instance, skb->data, skb->len);
+
+	/* initialize the control block */
+	ctrl->atm.vcc = vcc;
+	ctrl->len = skb->len;
+	ctrl->crc = crc32_be(~0, skb->data, skb->len);
+
+	skb_queue_tail(&instance->sndqueue, skb);
+	tasklet_schedule(&instance->tx_channel.tasklet);
+
+	return 0;
+
+ fail:
+	usbatm_pop(vcc, skb);
+	return err;
+}
+
+
+/********************
+**  bean counting  **
+********************/
+
+static void usbatm_destroy_instance(struct kref *kref)
+{
+	struct usbatm_data *instance = container_of(kref, struct usbatm_data, refcount);
+
+	tasklet_kill(&instance->rx_channel.tasklet);
+	tasklet_kill(&instance->tx_channel.tasklet);
+	usb_put_dev(instance->usb_dev);
+	kfree(instance);
+}
+
+static void usbatm_get_instance(struct usbatm_data *instance)
+{
+	kref_get(&instance->refcount);
+}
+
+static void usbatm_put_instance(struct usbatm_data *instance)
+{
+	kref_put(&instance->refcount, usbatm_destroy_instance);
+}
+
+
+/**********
+**  ATM  **
+**********/
+
+static void usbatm_atm_dev_close(struct atm_dev *atm_dev)
+{
+	struct usbatm_data *instance = atm_dev->dev_data;
+
+	if (!instance)
+		return;
+
+	atm_dev->dev_data = NULL; /* catch bugs */
+	usbatm_put_instance(instance);	/* taken in usbatm_atm_init */
+}
+
+static int usbatm_atm_proc_read(struct atm_dev *atm_dev, loff_t *pos, char *page)
+{
+	struct usbatm_data *instance = atm_dev->dev_data;
+	int left = *pos;
+
+	if (!instance)
+		return -ENODEV;
+
+	if (!left--)
+		return sprintf(page, "%s\n", instance->description);
+
+	if (!left--)
+		return sprintf(page, "MAC: %pM\n", atm_dev->esi);
+
+	if (!left--)
+		return sprintf(page,
+			       "AAL5: tx %d ( %d err ), rx %d ( %d err, %d drop )\n",
+			       atomic_read(&atm_dev->stats.aal5.tx),
+			       atomic_read(&atm_dev->stats.aal5.tx_err),
+			       atomic_read(&atm_dev->stats.aal5.rx),
+			       atomic_read(&atm_dev->stats.aal5.rx_err),
+			       atomic_read(&atm_dev->stats.aal5.rx_drop));
+
+	if (!left--) {
+		if (instance->disconnected)
+			return sprintf(page, "Disconnected\n");
+		else
+			switch (atm_dev->signal) {
+			case ATM_PHY_SIG_FOUND:
+				return sprintf(page, "Line up\n");
+			case ATM_PHY_SIG_LOST:
+				return sprintf(page, "Line down\n");
+			default:
+				return sprintf(page, "Line state unknown\n");
+			}
+	}
+
+	return 0;
+}
+
+static int usbatm_atm_open(struct atm_vcc *vcc)
+{
+	struct usbatm_data *instance = vcc->dev->dev_data;
+	struct usbatm_vcc_data *new = NULL;
+	int ret;
+	int vci = vcc->vci;
+	short vpi = vcc->vpi;
+
+	if (!instance)
+		return -ENODEV;
+
+	/* only support AAL5 */
+	if ((vcc->qos.aal != ATM_AAL5)) {
+		atm_warn(instance, "%s: unsupported ATM type %d!\n", __func__, vcc->qos.aal);
+		return -EINVAL;
+	}
+
+	/* sanity checks */
+	if ((vcc->qos.rxtp.max_sdu < 0) || (vcc->qos.rxtp.max_sdu > ATM_MAX_AAL5_PDU)) {
+		atm_dbg(instance, "%s: max_sdu %d out of range!\n", __func__, vcc->qos.rxtp.max_sdu);
+		return -EINVAL;
+	}
+
+	mutex_lock(&instance->serialize);	/* vs self, usbatm_atm_close, usbatm_usb_disconnect */
+
+	if (instance->disconnected) {
+		atm_dbg(instance, "%s: disconnected!\n", __func__);
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	if (usbatm_find_vcc(instance, vpi, vci)) {
+		atm_dbg(instance, "%s: %hd/%d already in use!\n", __func__, vpi, vci);
+		ret = -EADDRINUSE;
+		goto fail;
+	}
+
+	new = kzalloc(sizeof(struct usbatm_vcc_data), GFP_KERNEL);
+	if (!new) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	new->vcc = vcc;
+	new->vpi = vpi;
+	new->vci = vci;
+
+	new->sarb = alloc_skb(usbatm_pdu_length(vcc->qos.rxtp.max_sdu), GFP_KERNEL);
+	if (!new->sarb) {
+		atm_err(instance, "%s: no memory for SAR buffer!\n", __func__);
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	vcc->dev_data = new;
+
+	tasklet_disable(&instance->rx_channel.tasklet);
+	instance->cached_vcc = new;
+	instance->cached_vpi = vpi;
+	instance->cached_vci = vci;
+	list_add(&new->list, &instance->vcc_list);
+	tasklet_enable(&instance->rx_channel.tasklet);
+
+	set_bit(ATM_VF_ADDR, &vcc->flags);
+	set_bit(ATM_VF_PARTIAL, &vcc->flags);
+	set_bit(ATM_VF_READY, &vcc->flags);
+
+	mutex_unlock(&instance->serialize);
+
+	atm_dbg(instance, "%s: allocated vcc data 0x%p\n", __func__, new);
+
+	return 0;
+
+fail:
+	kfree(new);
+	mutex_unlock(&instance->serialize);
+	return ret;
+}
+
+static void usbatm_atm_close(struct atm_vcc *vcc)
+{
+	struct usbatm_data *instance = vcc->dev->dev_data;
+	struct usbatm_vcc_data *vcc_data = vcc->dev_data;
+
+	if (!instance || !vcc_data)
+		return;
+
+	usbatm_cancel_send(instance, vcc);
+
+	mutex_lock(&instance->serialize);	/* vs self, usbatm_atm_open, usbatm_usb_disconnect */
+
+	tasklet_disable(&instance->rx_channel.tasklet);
+	if (instance->cached_vcc == vcc_data) {
+		instance->cached_vcc = NULL;
+		instance->cached_vpi = ATM_VPI_UNSPEC;
+		instance->cached_vci = ATM_VCI_UNSPEC;
+	}
+	list_del(&vcc_data->list);
+	tasklet_enable(&instance->rx_channel.tasklet);
+
+	kfree_skb(vcc_data->sarb);
+	vcc_data->sarb = NULL;
+
+	kfree(vcc_data);
+	vcc->dev_data = NULL;
+
+	vcc->vpi = ATM_VPI_UNSPEC;
+	vcc->vci = ATM_VCI_UNSPEC;
+	clear_bit(ATM_VF_READY, &vcc->flags);
+	clear_bit(ATM_VF_PARTIAL, &vcc->flags);
+	clear_bit(ATM_VF_ADDR, &vcc->flags);
+
+	mutex_unlock(&instance->serialize);
+}
+
+static int usbatm_atm_ioctl(struct atm_dev *atm_dev, unsigned int cmd,
+			  void __user *arg)
+{
+	struct usbatm_data *instance = atm_dev->dev_data;
+
+	if (!instance || instance->disconnected)
+		return -ENODEV;
+
+	switch (cmd) {
+	case ATM_QUERYLOOP:
+		return put_user(ATM_LM_NONE, (int __user *)arg) ? -EFAULT : 0;
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+static int usbatm_atm_init(struct usbatm_data *instance)
+{
+	struct atm_dev *atm_dev;
+	int ret, i;
+
+	/* ATM init.  The ATM initialization scheme suffers from an intrinsic race
+	 * condition: callbacks we register can be executed at once, before we have
+	 * initialized the struct atm_dev.  To protect against this, all callbacks
+	 * abort if atm_dev->dev_data is NULL. */
+	atm_dev = atm_dev_register(instance->driver_name,
+				   &instance->usb_intf->dev, &usbatm_atm_devops,
+				   -1, NULL);
+	if (!atm_dev) {
+		usb_err(instance, "%s: failed to register ATM device!\n", __func__);
+		return -1;
+	}
+
+	instance->atm_dev = atm_dev;
+
+	atm_dev->ci_range.vpi_bits = ATM_CI_MAX;
+	atm_dev->ci_range.vci_bits = ATM_CI_MAX;
+	atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
+
+	/* temp init ATM device, set to 128kbit */
+	atm_dev->link_rate = 128 * 1000 / 424;
+
+	if (instance->driver->atm_start && ((ret = instance->driver->atm_start(instance, atm_dev)) < 0)) {
+		atm_err(instance, "%s: atm_start failed: %d!\n", __func__, ret);
+		goto fail;
+	}
+
+	usbatm_get_instance(instance);	/* dropped in usbatm_atm_dev_close */
+
+	/* ready for ATM callbacks */
+	mb();
+	atm_dev->dev_data = instance;
+
+	/* submit all rx URBs */
+	for (i = 0; i < num_rcv_urbs; i++)
+		usbatm_submit_urb(instance->urbs[i]);
+
+	return 0;
+
+ fail:
+	instance->atm_dev = NULL;
+	atm_dev_deregister(atm_dev); /* usbatm_atm_dev_close will eventually be called */
+	return ret;
+}
+
+
+/**********
+**  USB  **
+**********/
+
+static int usbatm_do_heavy_init(void *arg)
+{
+	struct usbatm_data *instance = arg;
+	int ret;
+
+	allow_signal(SIGTERM);
+	complete(&instance->thread_started);
+
+	ret = instance->driver->heavy_init(instance, instance->usb_intf);
+
+	if (!ret)
+		ret = usbatm_atm_init(instance);
+
+	mutex_lock(&instance->serialize);
+	instance->thread = NULL;
+	mutex_unlock(&instance->serialize);
+
+	kthread_complete_and_exit(&instance->thread_exited, ret);
+}
+
+static int usbatm_heavy_init(struct usbatm_data *instance)
+{
+	struct task_struct *t;
+
+	t = kthread_create(usbatm_do_heavy_init, instance, "%s",
+			instance->driver->driver_name);
+	if (IS_ERR(t)) {
+		usb_err(instance, "%s: failed to create kernel_thread (%ld)!\n",
+				__func__, PTR_ERR(t));
+		return PTR_ERR(t);
+	}
+
+	instance->thread = t;
+	wake_up_process(t);
+	wait_for_completion(&instance->thread_started);
+
+	return 0;
+}
+
+static void usbatm_tasklet_schedule(struct timer_list *t)
+{
+	struct usbatm_channel *channel = from_timer(channel, t, delay);
+
+	tasklet_schedule(&channel->tasklet);
+}
+
+static void usbatm_init_channel(struct usbatm_channel *channel)
+{
+	spin_lock_init(&channel->lock);
+	INIT_LIST_HEAD(&channel->list);
+	timer_setup(&channel->delay, usbatm_tasklet_schedule, 0);
+}
+
+int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
+		     struct usbatm_driver *driver)
+{
+	struct device *dev = &intf->dev;
+	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	struct usbatm_data *instance;
+	char *buf;
+	int error = -ENOMEM;
+	int i, length;
+	unsigned int maxpacket, num_packets;
+	size_t size;
+
+	/* instance init */
+	size = struct_size(instance, urbs, num_rcv_urbs + num_snd_urbs);
+	instance = kzalloc(size, GFP_KERNEL);
+	if (!instance)
+		return -ENOMEM;
+
+	/* public fields */
+
+	instance->driver = driver;
+	strscpy(instance->driver_name, driver->driver_name,
+		sizeof(instance->driver_name));
+
+	instance->usb_dev = usb_dev;
+	instance->usb_intf = intf;
+
+	buf = instance->description;
+	length = sizeof(instance->description);
+
+	if ((i = usb_string(usb_dev, usb_dev->descriptor.iProduct, buf, length)) < 0)
+		goto bind;
+
+	buf += i;
+	length -= i;
+
+	i = scnprintf(buf, length, " (");
+	buf += i;
+	length -= i;
+
+	if (length <= 0 || (i = usb_make_path(usb_dev, buf, length)) < 0)
+		goto bind;
+
+	buf += i;
+	length -= i;
+
+	snprintf(buf, length, ")");
+
+ bind:
+	if (driver->bind && (error = driver->bind(instance, intf, id)) < 0) {
+			dev_err(dev, "%s: bind failed: %d!\n", __func__, error);
+			goto fail_free;
+	}
+
+	/* private fields */
+
+	kref_init(&instance->refcount);		/* dropped in usbatm_usb_disconnect */
+	mutex_init(&instance->serialize);
+
+	instance->thread = NULL;
+	init_completion(&instance->thread_started);
+	init_completion(&instance->thread_exited);
+
+	INIT_LIST_HEAD(&instance->vcc_list);
+	skb_queue_head_init(&instance->sndqueue);
+
+	usbatm_init_channel(&instance->rx_channel);
+	usbatm_init_channel(&instance->tx_channel);
+	tasklet_setup(&instance->rx_channel.tasklet, usbatm_rx_process);
+	tasklet_setup(&instance->tx_channel.tasklet, usbatm_tx_process);
+	instance->rx_channel.stride = ATM_CELL_SIZE + driver->rx_padding;
+	instance->tx_channel.stride = ATM_CELL_SIZE + driver->tx_padding;
+	instance->rx_channel.usbatm = instance->tx_channel.usbatm = instance;
+
+	if ((instance->flags & UDSL_USE_ISOC) && driver->isoc_in)
+		instance->rx_channel.endpoint = usb_rcvisocpipe(usb_dev, driver->isoc_in);
+	else
+		instance->rx_channel.endpoint = usb_rcvbulkpipe(usb_dev, driver->bulk_in);
+
+	instance->tx_channel.endpoint = usb_sndbulkpipe(usb_dev, driver->bulk_out);
+
+	/* tx buffer size must be a positive multiple of the stride */
+	instance->tx_channel.buf_size = max(instance->tx_channel.stride,
+			snd_buf_bytes - (snd_buf_bytes % instance->tx_channel.stride));
+
+	/* rx buffer size must be a positive multiple of the endpoint maxpacket */
+	maxpacket = usb_maxpacket(usb_dev, instance->rx_channel.endpoint);
+
+	if ((maxpacket < 1) || (maxpacket > UDSL_MAX_BUF_SIZE)) {
+		dev_err(dev, "%s: invalid endpoint %02x!\n", __func__,
+				usb_pipeendpoint(instance->rx_channel.endpoint));
+		error = -EINVAL;
+		goto fail_unbind;
+	}
+
+	num_packets = max(1U, (rcv_buf_bytes + maxpacket / 2) / maxpacket); /* round */
+
+	if (num_packets * maxpacket > UDSL_MAX_BUF_SIZE)
+		num_packets--;
+
+	instance->rx_channel.buf_size = num_packets * maxpacket;
+	instance->rx_channel.packet_size = maxpacket;
+
+	for (i = 0; i < 2; i++) {
+		struct usbatm_channel *channel = i ?
+			&instance->tx_channel : &instance->rx_channel;
+
+		dev_dbg(dev, "%s: using %d byte buffer for %s channel 0x%p\n",
+			__func__, channel->buf_size, i ? "tx" : "rx", channel);
+	}
+
+	/* initialize urbs */
+
+	for (i = 0; i < num_rcv_urbs + num_snd_urbs; i++) {
+		u8 *buffer;
+		struct usbatm_channel *channel = i < num_rcv_urbs ?
+			&instance->rx_channel : &instance->tx_channel;
+		struct urb *urb;
+		unsigned int iso_packets = usb_pipeisoc(channel->endpoint) ? channel->buf_size / channel->packet_size : 0;
+
+		urb = usb_alloc_urb(iso_packets, GFP_KERNEL);
+		if (!urb) {
+			error = -ENOMEM;
+			goto fail_unbind;
+		}
+
+		instance->urbs[i] = urb;
+
+		/* zero the tx padding to avoid leaking information */
+		buffer = kzalloc(channel->buf_size, GFP_KERNEL);
+		if (!buffer) {
+			error = -ENOMEM;
+			goto fail_unbind;
+		}
+
+		usb_fill_bulk_urb(urb, instance->usb_dev, channel->endpoint,
+				  buffer, channel->buf_size, usbatm_complete, channel);
+		if (iso_packets) {
+			int j;
+			urb->interval = 1;
+			urb->transfer_flags = URB_ISO_ASAP;
+			urb->number_of_packets = iso_packets;
+			for (j = 0; j < iso_packets; j++) {
+				urb->iso_frame_desc[j].offset = channel->packet_size * j;
+				urb->iso_frame_desc[j].length = channel->packet_size;
+			}
+		}
+
+		/* put all tx URBs on the list of spares */
+		if (i >= num_rcv_urbs)
+			list_add_tail(&urb->urb_list, &channel->list);
+
+		vdbg(&intf->dev, "%s: alloced buffer 0x%p buf size %u urb 0x%p",
+		     __func__, urb->transfer_buffer, urb->transfer_buffer_length, urb);
+	}
+
+	instance->cached_vpi = ATM_VPI_UNSPEC;
+	instance->cached_vci = ATM_VCI_UNSPEC;
+	instance->cell_buf = kmalloc(instance->rx_channel.stride, GFP_KERNEL);
+
+	if (!instance->cell_buf) {
+		error = -ENOMEM;
+		goto fail_unbind;
+	}
+
+	if (!(instance->flags & UDSL_SKIP_HEAVY_INIT) && driver->heavy_init) {
+		error = usbatm_heavy_init(instance);
+	} else {
+		complete(&instance->thread_exited);	/* pretend that heavy_init was run */
+		error = usbatm_atm_init(instance);
+	}
+
+	if (error < 0)
+		goto fail_unbind;
+
+	usb_get_dev(usb_dev);
+	usb_set_intfdata(intf, instance);
+
+	return 0;
+
+ fail_unbind:
+	if (instance->driver->unbind)
+		instance->driver->unbind(instance, intf);
+ fail_free:
+	kfree(instance->cell_buf);
+
+	for (i = 0; i < num_rcv_urbs + num_snd_urbs; i++) {
+		if (instance->urbs[i])
+			kfree(instance->urbs[i]->transfer_buffer);
+		usb_free_urb(instance->urbs[i]);
+	}
+
+	kfree(instance);
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(usbatm_usb_probe);
+
+void usbatm_usb_disconnect(struct usb_interface *intf)
+{
+	struct device *dev = &intf->dev;
+	struct usbatm_data *instance = usb_get_intfdata(intf);
+	struct usbatm_vcc_data *vcc_data;
+	int i;
+
+	if (!instance) {
+		dev_dbg(dev, "%s: NULL instance!\n", __func__);
+		return;
+	}
+
+	usb_set_intfdata(intf, NULL);
+
+	mutex_lock(&instance->serialize);
+	instance->disconnected = 1;
+	if (instance->thread != NULL)
+		send_sig(SIGTERM, instance->thread, 1);
+	mutex_unlock(&instance->serialize);
+
+	wait_for_completion(&instance->thread_exited);
+
+	mutex_lock(&instance->serialize);
+	list_for_each_entry(vcc_data, &instance->vcc_list, list)
+		vcc_release_async(vcc_data->vcc, -EPIPE);
+	mutex_unlock(&instance->serialize);
+
+	tasklet_disable(&instance->rx_channel.tasklet);
+	tasklet_disable(&instance->tx_channel.tasklet);
+
+	for (i = 0; i < num_rcv_urbs + num_snd_urbs; i++)
+		usb_kill_urb(instance->urbs[i]);
+
+	del_timer_sync(&instance->rx_channel.delay);
+	del_timer_sync(&instance->tx_channel.delay);
+
+	/* turn usbatm_[rt]x_process into something close to a no-op */
+	/* no need to take the spinlock */
+	INIT_LIST_HEAD(&instance->rx_channel.list);
+	INIT_LIST_HEAD(&instance->tx_channel.list);
+
+	tasklet_enable(&instance->rx_channel.tasklet);
+	tasklet_enable(&instance->tx_channel.tasklet);
+
+	if (instance->atm_dev && instance->driver->atm_stop)
+		instance->driver->atm_stop(instance, instance->atm_dev);
+
+	if (instance->driver->unbind)
+		instance->driver->unbind(instance, intf);
+
+	instance->driver_data = NULL;
+
+	for (i = 0; i < num_rcv_urbs + num_snd_urbs; i++) {
+		kfree(instance->urbs[i]->transfer_buffer);
+		usb_free_urb(instance->urbs[i]);
+	}
+
+	kfree(instance->cell_buf);
+
+	/* ATM finalize */
+	if (instance->atm_dev) {
+		atm_dev_deregister(instance->atm_dev);
+		instance->atm_dev = NULL;
+	}
+
+	usbatm_put_instance(instance);	/* taken in usbatm_usb_probe */
+}
+EXPORT_SYMBOL_GPL(usbatm_usb_disconnect);
+
+
+/***********
+**  init  **
+***********/
+
+static int __init usbatm_usb_init(void)
+{
+	if (sizeof(struct usbatm_control) > sizeof_field(struct sk_buff, cb)) {
+		pr_err("%s unusable with this kernel!\n", usbatm_driver_name);
+		return -EIO;
+	}
+
+	if ((num_rcv_urbs > UDSL_MAX_RCV_URBS)
+	    || (num_snd_urbs > UDSL_MAX_SND_URBS)
+	    || (rcv_buf_bytes < 1)
+	    || (rcv_buf_bytes > UDSL_MAX_BUF_SIZE)
+	    || (snd_buf_bytes < 1)
+	    || (snd_buf_bytes > UDSL_MAX_BUF_SIZE))
+		return -EINVAL;
+
+	return 0;
+}
+module_init(usbatm_usb_init);
+
+static void __exit usbatm_usb_exit(void)
+{
+}
+module_exit(usbatm_usb_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/************
+**  debug  **
+************/
+
+#ifdef VERBOSE_DEBUG
+static int usbatm_print_packet(struct usbatm_data *instance,
+			       const unsigned char *data, int len)
+{
+	unsigned char buffer[256];
+	int i = 0, j = 0;
+
+	for (i = 0; i < len;) {
+		buffer[0] = '\0';
+		sprintf(buffer, "%.3d :", i);
+		for (j = 0; (j < 16) && (i < len); j++, i++)
+			sprintf(buffer, "%s %2.2x", buffer, data[i]);
+		dev_dbg(&instance->usb_intf->dev, "%s", buffer);
+	}
+	return i;
+}
+#endif
diff --git a/drivers/usb/atm/usbatm.h b/drivers/usb/atm/usbatm.h
new file mode 100644
index 000000000..d96658e2e
--- /dev/null
+++ b/drivers/usb/atm/usbatm.h
@@ -0,0 +1,185 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/******************************************************************************
+ *  usbatm.h - Generic USB xDSL driver core
+ *
+ *  Copyright (C) 2001, Alcatel
+ *  Copyright (C) 2003, Duncan Sands, SolNegro, Josep Comas
+ *  Copyright (C) 2004, David Woodhouse
+ ******************************************************************************/
+
+#ifndef	_USBATM_H_
+#define	_USBATM_H_
+
+#include <linux/atm.h>
+#include <linux/atmdev.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/stringify.h>
+#include <linux/usb.h>
+#include <linux/mutex.h>
+#include <linux/ratelimit.h>
+
+/*
+#define VERBOSE_DEBUG
+*/
+
+#define usb_err(instance, format, arg...)	\
+	dev_err(&(instance)->usb_intf->dev , format , ## arg)
+#define usb_info(instance, format, arg...)	\
+	dev_info(&(instance)->usb_intf->dev , format , ## arg)
+#define usb_warn(instance, format, arg...)	\
+	dev_warn(&(instance)->usb_intf->dev , format , ## arg)
+#define usb_dbg(instance, format, arg...)	\
+	dev_dbg(&(instance)->usb_intf->dev , format , ## arg)
+
+/* FIXME: move to dev_* once ATM is driver model aware */
+#define atm_printk(level, instance, format, arg...)	\
+	printk(level "ATM dev %d: " format ,		\
+	(instance)->atm_dev->number , ## arg)
+
+#define atm_err(instance, format, arg...)	\
+	atm_printk(KERN_ERR, instance , format , ## arg)
+#define atm_info(instance, format, arg...)	\
+	atm_printk(KERN_INFO, instance , format , ## arg)
+#define atm_warn(instance, format, arg...)	\
+	atm_printk(KERN_WARNING, instance , format , ## arg)
+#define atm_dbg(instance, format, ...)					\
+	pr_debug("ATM dev %d: " format,					\
+		 (instance)->atm_dev->number, ##__VA_ARGS__)
+#define atm_rldbg(instance, format, ...)				\
+	pr_debug_ratelimited("ATM dev %d: " format,			\
+			     (instance)->atm_dev->number, ##__VA_ARGS__)
+
+/* flags, set by mini-driver in bind() */
+
+#define UDSL_SKIP_HEAVY_INIT	(1<<0)
+#define UDSL_USE_ISOC		(1<<1)
+#define UDSL_IGNORE_EILSEQ	(1<<2)
+
+
+/* mini driver */
+
+struct usbatm_data;
+
+/*
+*  Assuming all methods exist and succeed, they are called in this order:
+*
+*	bind, heavy_init, atm_start, ..., atm_stop, unbind
+*/
+
+struct usbatm_driver {
+	const char *driver_name;
+
+	/* init device ... can sleep, or cause probe() failure */
+	int (*bind) (struct usbatm_data *, struct usb_interface *,
+		     const struct usb_device_id *id);
+
+	/* additional device initialization that is too slow to be done in probe() */
+	int (*heavy_init) (struct usbatm_data *, struct usb_interface *);
+
+	/* cleanup device ... can sleep, but can't fail */
+	void (*unbind) (struct usbatm_data *, struct usb_interface *);
+
+	/* init ATM device ... can sleep, or cause ATM initialization failure */
+	int (*atm_start) (struct usbatm_data *, struct atm_dev *);
+
+	/* cleanup ATM device ... can sleep, but can't fail */
+	void (*atm_stop) (struct usbatm_data *, struct atm_dev *);
+
+	int bulk_in;	/* bulk rx endpoint */
+	int isoc_in;	/* isochronous rx endpoint */
+	int bulk_out;	/* bulk tx endpoint */
+
+	unsigned rx_padding;
+	unsigned tx_padding;
+};
+
+extern int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
+		struct usbatm_driver *driver);
+extern void usbatm_usb_disconnect(struct usb_interface *intf);
+
+
+struct usbatm_channel {
+	int endpoint;			/* usb pipe */
+	unsigned int stride;		/* ATM cell size + padding */
+	unsigned int buf_size;		/* urb buffer size */
+	unsigned int packet_size;	/* endpoint maxpacket */
+	spinlock_t lock;
+	struct list_head list;
+	struct tasklet_struct tasklet;
+	struct timer_list delay;
+	struct usbatm_data *usbatm;
+};
+
+/* main driver data */
+
+struct usbatm_data {
+	/******************
+	*  public fields  *
+	******************/
+
+	/* mini driver */
+	struct usbatm_driver *driver;
+	void *driver_data;
+	char driver_name[16];
+	unsigned int flags; /* set by mini-driver in bind() */
+
+	/* USB device */
+	struct usb_device *usb_dev;
+	struct usb_interface *usb_intf;
+	char description[64];
+
+	/* ATM device */
+	struct atm_dev *atm_dev;
+
+	/********************************
+	*  private fields - do not use  *
+	********************************/
+
+	struct kref refcount;
+	struct mutex serialize;
+	int disconnected;
+
+	/* heavy init */
+	struct task_struct *thread;
+	struct completion thread_started;
+	struct completion thread_exited;
+
+	/* ATM device */
+	struct list_head vcc_list;
+
+	struct usbatm_channel rx_channel;
+	struct usbatm_channel tx_channel;
+
+	struct sk_buff_head sndqueue;
+	struct sk_buff *current_skb;	/* being emptied */
+
+	struct usbatm_vcc_data *cached_vcc;
+	int cached_vci;
+	short cached_vpi;
+
+	unsigned char *cell_buf;	/* holds partial rx cell */
+	unsigned int buf_usage;
+
+	struct urb *urbs[];
+};
+
+static inline void *to_usbatm_driver_data(struct usb_interface *intf)
+{
+	struct usbatm_data *usbatm_instance;
+
+	if (intf == NULL)
+		return NULL;
+
+	usbatm_instance = usb_get_intfdata(intf);
+
+	if (usbatm_instance == NULL) /* set NULL before unbind() */
+		return NULL;
+
+	return usbatm_instance->driver_data; /* set NULL after unbind() */
+}
+
+#endif	/* _USBATM_H_ */
diff --git a/drivers/usb/atm/xusbatm.c b/drivers/usb/atm/xusbatm.c
new file mode 100644
index 000000000..0befbf63d
--- /dev/null
+++ b/drivers/usb/atm/xusbatm.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0+
+/******************************************************************************
+ *  xusbatm.c -	dumb usbatm-based driver for modems initialized in userspace
+ *
+ *  Copyright (C) 2005 Duncan Sands, Roman Kagan (rkagan % mail ! ru)
+ ******************************************************************************/
+
+#include <linux/module.h>
+#include <linux/etherdevice.h>		/* for eth_random_addr() */
+
+#include "usbatm.h"
+
+
+#define XUSBATM_DRIVERS_MAX	8
+
+#define XUSBATM_PARM(name, type, parmtype, desc) \
+	static type name[XUSBATM_DRIVERS_MAX]; \
+	static unsigned int num_##name; \
+	module_param_array(name, parmtype, &num_##name, 0444); \
+	MODULE_PARM_DESC(name, desc)
+
+XUSBATM_PARM(vendor, unsigned short, ushort, "USB device vendor");
+XUSBATM_PARM(product, unsigned short, ushort, "USB device product");
+
+XUSBATM_PARM(rx_endpoint, unsigned char, byte, "rx endpoint number");
+XUSBATM_PARM(tx_endpoint, unsigned char, byte, "tx endpoint number");
+XUSBATM_PARM(rx_padding, unsigned char, byte, "rx padding (default 0)");
+XUSBATM_PARM(tx_padding, unsigned char, byte, "tx padding (default 0)");
+XUSBATM_PARM(rx_altsetting, unsigned char, byte, "rx altsetting (default 0)");
+XUSBATM_PARM(tx_altsetting, unsigned char, byte, "rx altsetting (default 0)");
+
+static const char xusbatm_driver_name[] = "xusbatm";
+
+static struct usbatm_driver xusbatm_drivers[XUSBATM_DRIVERS_MAX];
+static struct usb_device_id xusbatm_usb_ids[XUSBATM_DRIVERS_MAX + 1];
+static struct usb_driver xusbatm_usb_driver;
+
+static struct usb_interface *xusbatm_find_intf(struct usb_device *usb_dev, int altsetting, u8 ep)
+{
+	struct usb_host_interface *alt;
+	struct usb_interface *intf;
+	int i, j;
+
+	for (i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++)
+		if ((intf = usb_dev->actconfig->interface[i]) && (alt = usb_altnum_to_altsetting(intf, altsetting)))
+			for (j = 0; j < alt->desc.bNumEndpoints; j++)
+				if (alt->endpoint[j].desc.bEndpointAddress == ep)
+					return intf;
+	return NULL;
+}
+
+static int xusbatm_capture_intf(struct usbatm_data *usbatm, struct usb_device *usb_dev,
+		struct usb_interface *intf, int altsetting, int claim)
+{
+	int ifnum = intf->altsetting->desc.bInterfaceNumber;
+	int ret;
+
+	if (claim && (ret = usb_driver_claim_interface(&xusbatm_usb_driver, intf, usbatm))) {
+		usb_err(usbatm, "%s: failed to claim interface %2d (%d)!\n", __func__, ifnum, ret);
+		return ret;
+	}
+	ret = usb_set_interface(usb_dev, ifnum, altsetting);
+	if (ret) {
+		usb_err(usbatm, "%s: altsetting %2d for interface %2d failed (%d)!\n", __func__, altsetting, ifnum, ret);
+		return ret;
+	}
+	return 0;
+}
+
+static void xusbatm_release_intf(struct usb_device *usb_dev, struct usb_interface *intf, int claimed)
+{
+	if (claimed) {
+		usb_set_intfdata(intf, NULL);
+		usb_driver_release_interface(&xusbatm_usb_driver, intf);
+	}
+}
+
+static int xusbatm_bind(struct usbatm_data *usbatm,
+			struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	int drv_ix = id - xusbatm_usb_ids;
+	int rx_alt = rx_altsetting[drv_ix];
+	int tx_alt = tx_altsetting[drv_ix];
+	struct usb_interface *rx_intf = xusbatm_find_intf(usb_dev, rx_alt, rx_endpoint[drv_ix]);
+	struct usb_interface *tx_intf = xusbatm_find_intf(usb_dev, tx_alt, tx_endpoint[drv_ix]);
+	int ret;
+
+	usb_dbg(usbatm, "%s: binding driver %d: vendor %04x product %04x"
+		" rx: ep %02x padd %d alt %2d tx: ep %02x padd %d alt %2d\n",
+		__func__, drv_ix, vendor[drv_ix], product[drv_ix],
+		rx_endpoint[drv_ix], rx_padding[drv_ix], rx_alt,
+		tx_endpoint[drv_ix], tx_padding[drv_ix], tx_alt);
+
+	if (!rx_intf || !tx_intf) {
+		if (!rx_intf)
+			usb_dbg(usbatm, "%s: no interface contains endpoint %02x in altsetting %2d\n",
+				__func__, rx_endpoint[drv_ix], rx_alt);
+		if (!tx_intf)
+			usb_dbg(usbatm, "%s: no interface contains endpoint %02x in altsetting %2d\n",
+				__func__, tx_endpoint[drv_ix], tx_alt);
+		return -ENODEV;
+	}
+
+	if ((rx_intf != intf) && (tx_intf != intf))
+		return -ENODEV;
+
+	if ((rx_intf == tx_intf) && (rx_alt != tx_alt)) {
+		usb_err(usbatm, "%s: altsettings clash on interface %2d (%2d vs %2d)!\n", __func__,
+				rx_intf->altsetting->desc.bInterfaceNumber, rx_alt, tx_alt);
+		return -EINVAL;
+	}
+
+	usb_dbg(usbatm, "%s: rx If#=%2d; tx If#=%2d\n", __func__,
+			rx_intf->altsetting->desc.bInterfaceNumber,
+			tx_intf->altsetting->desc.bInterfaceNumber);
+
+	ret = xusbatm_capture_intf(usbatm, usb_dev, rx_intf, rx_alt, rx_intf != intf);
+	if (ret)
+		return ret;
+
+	if ((tx_intf != rx_intf) && (ret = xusbatm_capture_intf(usbatm, usb_dev, tx_intf, tx_alt, tx_intf != intf))) {
+		xusbatm_release_intf(usb_dev, rx_intf, rx_intf != intf);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void xusbatm_unbind(struct usbatm_data *usbatm,
+			   struct usb_interface *intf)
+{
+	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	int i;
+
+	usb_dbg(usbatm, "%s entered\n", __func__);
+
+	for (i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) {
+		struct usb_interface *cur_intf = usb_dev->actconfig->interface[i];
+
+		if (cur_intf && (usb_get_intfdata(cur_intf) == usbatm)) {
+			usb_set_intfdata(cur_intf, NULL);
+			usb_driver_release_interface(&xusbatm_usb_driver, cur_intf);
+		}
+	}
+}
+
+static int xusbatm_atm_start(struct usbatm_data *usbatm,
+			     struct atm_dev *atm_dev)
+{
+	atm_dbg(usbatm, "%s entered\n", __func__);
+
+	/* use random MAC as we've no way to get it from the device */
+	eth_random_addr(atm_dev->esi);
+
+	return 0;
+}
+
+
+static int xusbatm_usb_probe(struct usb_interface *intf,
+			     const struct usb_device_id *id)
+{
+	return usbatm_usb_probe(intf, id,
+				xusbatm_drivers + (id - xusbatm_usb_ids));
+}
+
+static struct usb_driver xusbatm_usb_driver = {
+	.name		= xusbatm_driver_name,
+	.probe		= xusbatm_usb_probe,
+	.disconnect	= usbatm_usb_disconnect,
+	.id_table	= xusbatm_usb_ids
+};
+
+static int __init xusbatm_init(void)
+{
+	int i;
+
+	if (!num_vendor ||
+	    num_vendor != num_product ||
+	    num_vendor != num_rx_endpoint ||
+	    num_vendor != num_tx_endpoint) {
+		pr_warn("xusbatm: malformed module parameters\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < num_vendor; i++) {
+		rx_endpoint[i] |= USB_DIR_IN;
+		tx_endpoint[i] &= USB_ENDPOINT_NUMBER_MASK;
+
+		xusbatm_usb_ids[i].match_flags	= USB_DEVICE_ID_MATCH_DEVICE;
+		xusbatm_usb_ids[i].idVendor	= vendor[i];
+		xusbatm_usb_ids[i].idProduct	= product[i];
+
+		xusbatm_drivers[i].driver_name	= xusbatm_driver_name;
+		xusbatm_drivers[i].bind		= xusbatm_bind;
+		xusbatm_drivers[i].unbind	= xusbatm_unbind;
+		xusbatm_drivers[i].atm_start	= xusbatm_atm_start;
+		xusbatm_drivers[i].bulk_in	= rx_endpoint[i];
+		xusbatm_drivers[i].bulk_out	= tx_endpoint[i];
+		xusbatm_drivers[i].rx_padding	= rx_padding[i];
+		xusbatm_drivers[i].tx_padding	= tx_padding[i];
+	}
+
+	return usb_register(&xusbatm_usb_driver);
+}
+module_init(xusbatm_init);
+
+static void __exit xusbatm_exit(void)
+{
+	usb_deregister(&xusbatm_usb_driver);
+}
+module_exit(xusbatm_exit);
+
+MODULE_AUTHOR("Roman Kagan, Duncan Sands");
+MODULE_DESCRIPTION("Driver for USB ADSL modems initialized in userspace");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/c67x00/Makefile b/drivers/usb/c67x00/Makefile
new file mode 100644
index 000000000..0cde62d06
--- /dev/null
+++ b/drivers/usb/c67x00/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Cypress C67X00 USB Controller
+#
+
+obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00.o
+
+c67x00-y := c67x00-drv.o c67x00-ll-hpi.o c67x00-hcd.o c67x00-sched.o
diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c
new file mode 100644
index 000000000..6db5cb1b2
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-drv.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * c67x00-drv.c: Cypress C67X00 USB Common infrastructure
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ */
+
+/*
+ * This file implements the common infrastructure for using the c67x00.
+ * It is both the link between the platform configuration and subdrivers and
+ * the link between the common hardware parts and the subdrivers (e.g.
+ * interrupt handling).
+ *
+ * The c67x00 has 2 SIE's (serial interface engine) which can be configured
+ * to be host, device or OTG (with some limitations, E.G. only SIE1 can be OTG).
+ *
+ * Depending on the platform configuration, the SIE's are created and
+ * the corresponding subdriver is initialized (c67x00_probe_sie).
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/c67x00.h>
+
+#include "c67x00.h"
+#include "c67x00-hcd.h"
+
+static void c67x00_probe_sie(struct c67x00_sie *sie,
+			     struct c67x00_device *dev, int sie_num)
+{
+	spin_lock_init(&sie->lock);
+	sie->dev = dev;
+	sie->sie_num = sie_num;
+	sie->mode = c67x00_sie_config(dev->pdata->sie_config, sie_num);
+
+	switch (sie->mode) {
+	case C67X00_SIE_HOST:
+		c67x00_hcd_probe(sie);
+		break;
+
+	case C67X00_SIE_UNUSED:
+		dev_info(sie_dev(sie),
+			 "Not using SIE %d as requested\n", sie->sie_num);
+		break;
+
+	default:
+		dev_err(sie_dev(sie),
+			"Unsupported configuration: 0x%x for SIE %d\n",
+			sie->mode, sie->sie_num);
+		break;
+	}
+}
+
+static void c67x00_remove_sie(struct c67x00_sie *sie)
+{
+	switch (sie->mode) {
+	case C67X00_SIE_HOST:
+		c67x00_hcd_remove(sie);
+		break;
+
+	default:
+		break;
+	}
+}
+
+static irqreturn_t c67x00_irq(int irq, void *__dev)
+{
+	struct c67x00_device *c67x00 = __dev;
+	struct c67x00_sie *sie;
+	u16 msg, int_status;
+	int i, count = 8;
+
+	int_status = c67x00_ll_hpi_status(c67x00);
+	if (!int_status)
+		return IRQ_NONE;
+
+	while (int_status != 0 && (count-- >= 0)) {
+		c67x00_ll_irq(c67x00, int_status);
+		for (i = 0; i < C67X00_SIES; i++) {
+			sie = &c67x00->sie[i];
+			msg = 0;
+			if (int_status & SIEMSG_FLG(i))
+				msg = c67x00_ll_fetch_siemsg(c67x00, i);
+			if (sie->irq)
+				sie->irq(sie, int_status, msg);
+		}
+		int_status = c67x00_ll_hpi_status(c67x00);
+	}
+
+	if (int_status)
+		dev_warn(&c67x00->pdev->dev, "Not all interrupts handled! "
+			 "status = 0x%04x\n", int_status);
+
+	return IRQ_HANDLED;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int c67x00_drv_probe(struct platform_device *pdev)
+{
+	struct c67x00_device *c67x00;
+	struct c67x00_platform_data *pdata;
+	struct resource *res, *res2;
+	int ret, i;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res2)
+		return -ENODEV;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata)
+		return -ENODEV;
+
+	c67x00 = kzalloc(sizeof(*c67x00), GFP_KERNEL);
+	if (!c67x00)
+		return -ENOMEM;
+
+	if (!request_mem_region(res->start, resource_size(res),
+				pdev->name)) {
+		dev_err(&pdev->dev, "Memory region busy\n");
+		ret = -EBUSY;
+		goto request_mem_failed;
+	}
+	c67x00->hpi.base = ioremap(res->start, resource_size(res));
+	if (!c67x00->hpi.base) {
+		dev_err(&pdev->dev, "Unable to map HPI registers\n");
+		ret = -EIO;
+		goto map_failed;
+	}
+
+	spin_lock_init(&c67x00->hpi.lock);
+	c67x00->hpi.regstep = pdata->hpi_regstep;
+	c67x00->pdata = dev_get_platdata(&pdev->dev);
+	c67x00->pdev = pdev;
+
+	c67x00_ll_init(c67x00);
+	c67x00_ll_hpi_reg_init(c67x00);
+
+	ret = request_irq(res2->start, c67x00_irq, 0, pdev->name, c67x00);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot claim IRQ\n");
+		goto request_irq_failed;
+	}
+
+	ret = c67x00_ll_reset(c67x00);
+	if (ret) {
+		dev_err(&pdev->dev, "Device reset failed\n");
+		goto reset_failed;
+	}
+
+	for (i = 0; i < C67X00_SIES; i++)
+		c67x00_probe_sie(&c67x00->sie[i], c67x00, i);
+
+	platform_set_drvdata(pdev, c67x00);
+
+	return 0;
+
+ reset_failed:
+	free_irq(res2->start, c67x00);
+ request_irq_failed:
+	iounmap(c67x00->hpi.base);
+ map_failed:
+	release_mem_region(res->start, resource_size(res));
+ request_mem_failed:
+	kfree(c67x00);
+
+	return ret;
+}
+
+static int c67x00_drv_remove(struct platform_device *pdev)
+{
+	struct c67x00_device *c67x00 = platform_get_drvdata(pdev);
+	struct resource *res;
+	int i;
+
+	for (i = 0; i < C67X00_SIES; i++)
+		c67x00_remove_sie(&c67x00->sie[i]);
+
+	c67x00_ll_release(c67x00);
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	free_irq(res->start, c67x00);
+
+	iounmap(c67x00->hpi.base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	kfree(c67x00);
+
+	return 0;
+}
+
+static struct platform_driver c67x00_driver = {
+	.probe	= c67x00_drv_probe,
+	.remove	= c67x00_drv_remove,
+	.driver	= {
+		.name = "c67x00",
+	},
+};
+
+module_platform_driver(c67x00_driver);
+
+MODULE_AUTHOR("Peter Korsgaard, Jan Veldeman, Grant Likely");
+MODULE_DESCRIPTION("Cypress C67X00 USB Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:c67x00");
diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c
new file mode 100644
index 000000000..39f237666
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-hcd.c
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * c67x00-hcd.c: Cypress C67X00 USB Host Controller Driver
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+
+#include "c67x00.h"
+#include "c67x00-hcd.h"
+
+/* --------------------------------------------------------------------------
+ * Root Hub Support
+ */
+
+static __u8 c67x00_hub_des[] = {
+	0x09,			/*  __u8  bLength; */
+	USB_DT_HUB,		/*  __u8  bDescriptorType; Hub-descriptor */
+	0x02,			/*  __u8  bNbrPorts; */
+	0x00,			/* __u16  wHubCharacteristics; */
+	0x00,			/*   (per-port OC, no power switching) */
+	0x32,			/*  __u8  bPwrOn2pwrGood; 2ms */
+	0x00,			/*  __u8  bHubContrCurrent; 0 mA */
+	0x00,			/*  __u8  DeviceRemovable; ** 7 Ports max ** */
+	0xff,			/*  __u8  PortPwrCtrlMask; ** 7 ports max ** */
+};
+
+static void c67x00_hub_reset_host_port(struct c67x00_sie *sie, int port)
+{
+	struct c67x00_hcd *c67x00 = sie->private_data;
+	unsigned long flags;
+
+	c67x00_ll_husb_reset(sie, port);
+
+	spin_lock_irqsave(&c67x00->lock, flags);
+	c67x00_ll_husb_reset_port(sie, port);
+	spin_unlock_irqrestore(&c67x00->lock, flags);
+
+	c67x00_ll_set_husb_eot(sie->dev, DEFAULT_EOT);
+}
+
+static int c67x00_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+	struct c67x00_sie *sie = c67x00->sie;
+	u16 status;
+	int i;
+
+	*buf = 0;
+	status = c67x00_ll_usb_get_status(sie);
+	for (i = 0; i < C67X00_PORTS; i++)
+		if (status & PORT_CONNECT_CHANGE(i))
+			*buf |= (1 << i);
+
+	/* bit 0 denotes hub change, b1..n port change */
+	*buf <<= 1;
+
+	return !!*buf;
+}
+
+static int c67x00_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+			      u16 wIndex, char *buf, u16 wLength)
+{
+	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+	struct c67x00_sie *sie = c67x00->sie;
+	u16 status, usb_status;
+	int len = 0;
+	unsigned int port = wIndex-1;
+	u16 wPortChange, wPortStatus;
+
+	switch (typeReq) {
+
+	case GetHubStatus:
+		*(__le32 *) buf = cpu_to_le32(0);
+		len = 4;		/* hub power */
+		break;
+
+	case GetPortStatus:
+		if (wIndex > C67X00_PORTS)
+			return -EPIPE;
+
+		status = c67x00_ll_usb_get_status(sie);
+		usb_status = c67x00_ll_get_usb_ctl(sie);
+
+		wPortChange = 0;
+		if (status & PORT_CONNECT_CHANGE(port))
+			wPortChange |= USB_PORT_STAT_C_CONNECTION;
+
+		wPortStatus = USB_PORT_STAT_POWER;
+		if (!(status & PORT_SE0_STATUS(port)))
+			wPortStatus |= USB_PORT_STAT_CONNECTION;
+		if (usb_status & LOW_SPEED_PORT(port)) {
+			wPortStatus |= USB_PORT_STAT_LOW_SPEED;
+			c67x00->low_speed_ports |= (1 << port);
+		} else
+			c67x00->low_speed_ports &= ~(1 << port);
+
+		if (usb_status & SOF_EOP_EN(port))
+			wPortStatus |= USB_PORT_STAT_ENABLE;
+
+		*(__le16 *) buf = cpu_to_le16(wPortStatus);
+		*(__le16 *) (buf + 2) = cpu_to_le16(wPortChange);
+		len = 4;
+		break;
+
+	case SetHubFeature:	/* We don't implement these */
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			len = 0;
+			break;
+
+		default:
+			return -EPIPE;
+		}
+		break;
+
+	case SetPortFeature:
+		if (wIndex > C67X00_PORTS)
+			return -EPIPE;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"SetPortFeature %d (SUSPEND)\n", port);
+			len = 0;
+			break;
+
+		case USB_PORT_FEAT_RESET:
+			c67x00_hub_reset_host_port(sie, port);
+			len = 0;
+			break;
+
+		case USB_PORT_FEAT_POWER:
+			/* Power always enabled */
+			len = 0;
+			break;
+
+		default:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"%s: SetPortFeature %d (0x%04x) Error!\n",
+				__func__, port, wValue);
+			return -EPIPE;
+		}
+		break;
+
+	case ClearPortFeature:
+		if (wIndex > C67X00_PORTS)
+			return -EPIPE;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			/* Reset the port so that the c67x00 also notices the
+			 * disconnect */
+			c67x00_hub_reset_host_port(sie, port);
+			len = 0;
+			break;
+
+		case USB_PORT_FEAT_C_ENABLE:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"ClearPortFeature (%d): C_ENABLE\n", port);
+			len = 0;
+			break;
+
+		case USB_PORT_FEAT_SUSPEND:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"ClearPortFeature (%d): SUSPEND\n", port);
+			len = 0;
+			break;
+
+		case USB_PORT_FEAT_C_SUSPEND:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"ClearPortFeature (%d): C_SUSPEND\n", port);
+			len = 0;
+			break;
+
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"ClearPortFeature (%d): POWER\n", port);
+			return -EPIPE;
+
+		case USB_PORT_FEAT_C_CONNECTION:
+			c67x00_ll_usb_clear_status(sie,
+						   PORT_CONNECT_CHANGE(port));
+			len = 0;
+			break;
+
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"ClearPortFeature (%d): OVER_CURRENT\n", port);
+			len = 0;
+			break;
+
+		case USB_PORT_FEAT_C_RESET:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"ClearPortFeature (%d): C_RESET\n", port);
+			len = 0;
+			break;
+
+		default:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"%s: ClearPortFeature %d (0x%04x) Error!\n",
+				__func__, port, wValue);
+			return -EPIPE;
+		}
+		break;
+
+	case GetHubDescriptor:
+		len = min_t(unsigned int, sizeof(c67x00_hub_des), wLength);
+		memcpy(buf, c67x00_hub_des, len);
+		break;
+
+	default:
+		dev_dbg(c67x00_hcd_dev(c67x00), "%s: unknown\n", __func__);
+		return -EPIPE;
+	}
+
+	return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * Main part of host controller driver
+ */
+
+/*
+ * c67x00_hcd_irq
+ *
+ * This function is called from the interrupt handler in c67x00-drv.c
+ */
+static void c67x00_hcd_irq(struct c67x00_sie *sie, u16 int_status, u16 msg)
+{
+	struct c67x00_hcd *c67x00 = sie->private_data;
+	struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00);
+
+	/* Handle sie message flags */
+	if (msg) {
+		if (msg & HUSB_TDListDone)
+			c67x00_sched_kick(c67x00);
+		else
+			dev_warn(c67x00_hcd_dev(c67x00),
+				 "Unknown SIE msg flag(s): 0x%04x\n", msg);
+	}
+
+	if (unlikely(hcd->state == HC_STATE_HALT))
+		return;
+
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		return;
+
+	/* Handle Start of frame events */
+	if (int_status & SOFEOP_FLG(sie->sie_num)) {
+		c67x00_ll_usb_clear_status(sie, SOF_EOP_IRQ_FLG);
+		c67x00_sched_kick(c67x00);
+	}
+}
+
+/*
+ * c67x00_hcd_start: Host controller start hook
+ */
+static int c67x00_hcd_start(struct usb_hcd *hcd)
+{
+	hcd->uses_new_polling = 1;
+	hcd->state = HC_STATE_RUNNING;
+	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+	return 0;
+}
+
+/*
+ * c67x00_hcd_stop: Host controller stop hook
+ */
+static void c67x00_hcd_stop(struct usb_hcd *hcd)
+{
+	/* Nothing to do */
+}
+
+static int c67x00_hcd_get_frame(struct usb_hcd *hcd)
+{
+	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+	u16 temp_val;
+
+	dev_dbg(c67x00_hcd_dev(c67x00), "%s\n", __func__);
+	temp_val = c67x00_ll_husb_get_frame(c67x00->sie);
+	temp_val &= HOST_FRAME_MASK;
+	return temp_val ? (temp_val - 1) : HOST_FRAME_MASK;
+}
+
+static const struct hc_driver c67x00_hc_driver = {
+	.description	= "c67x00-hcd",
+	.product_desc	= "Cypress C67X00 Host Controller",
+	.hcd_priv_size	= sizeof(struct c67x00_hcd),
+	.flags		= HCD_USB11 | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.start		= c67x00_hcd_start,
+	.stop		= c67x00_hcd_stop,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue	= c67x00_urb_enqueue,
+	.urb_dequeue	= c67x00_urb_dequeue,
+	.endpoint_disable = c67x00_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number = c67x00_hcd_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data = c67x00_hub_status_data,
+	.hub_control	= c67x00_hub_control,
+};
+
+/* ---------------------------------------------------------------------
+ * Setup/Teardown routines
+ */
+
+int c67x00_hcd_probe(struct c67x00_sie *sie)
+{
+	struct c67x00_hcd *c67x00;
+	struct usb_hcd *hcd;
+	unsigned long flags;
+	int retval;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	hcd = usb_create_hcd(&c67x00_hc_driver, sie_dev(sie), "c67x00_sie");
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err0;
+	}
+	c67x00 = hcd_to_c67x00_hcd(hcd);
+
+	spin_lock_init(&c67x00->lock);
+	c67x00->sie = sie;
+
+	INIT_LIST_HEAD(&c67x00->list[PIPE_ISOCHRONOUS]);
+	INIT_LIST_HEAD(&c67x00->list[PIPE_INTERRUPT]);
+	INIT_LIST_HEAD(&c67x00->list[PIPE_CONTROL]);
+	INIT_LIST_HEAD(&c67x00->list[PIPE_BULK]);
+	c67x00->urb_count = 0;
+	INIT_LIST_HEAD(&c67x00->td_list);
+	c67x00->td_base_addr = CY_HCD_BUF_ADDR + SIE_TD_OFFSET(sie->sie_num);
+	c67x00->buf_base_addr = CY_HCD_BUF_ADDR + SIE_BUF_OFFSET(sie->sie_num);
+	c67x00->max_frame_bw = MAX_FRAME_BW_STD;
+
+	c67x00_ll_husb_init_host_port(sie);
+
+	init_completion(&c67x00->endpoint_disable);
+	retval = c67x00_sched_start_scheduler(c67x00);
+	if (retval)
+		goto err1;
+
+	retval = usb_add_hcd(hcd, 0, 0);
+	if (retval) {
+		dev_dbg(sie_dev(sie), "%s: usb_add_hcd returned %d\n",
+			__func__, retval);
+		goto err2;
+	}
+
+	device_wakeup_enable(hcd->self.controller);
+
+	spin_lock_irqsave(&sie->lock, flags);
+	sie->private_data = c67x00;
+	sie->irq = c67x00_hcd_irq;
+	spin_unlock_irqrestore(&sie->lock, flags);
+
+	return retval;
+
+ err2:
+	c67x00_sched_stop_scheduler(c67x00);
+ err1:
+	usb_put_hcd(hcd);
+ err0:
+	return retval;
+}
+
+/* may be called with controller, bus, and devices active */
+void c67x00_hcd_remove(struct c67x00_sie *sie)
+{
+	struct c67x00_hcd *c67x00 = sie->private_data;
+	struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00);
+
+	c67x00_sched_stop_scheduler(c67x00);
+	usb_remove_hcd(hcd);
+	usb_put_hcd(hcd);
+}
diff --git a/drivers/usb/c67x00/c67x00-hcd.h b/drivers/usb/c67x00/c67x00-hcd.h
new file mode 100644
index 000000000..6332a6b5d
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-hcd.h
@@ -0,0 +1,119 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * c67x00-hcd.h: Cypress C67X00 USB HCD
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ */
+
+#ifndef _USB_C67X00_HCD_H
+#define _USB_C67X00_HCD_H
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include "c67x00.h"
+
+/*
+ * The following parameters depend on the CPU speed, bus speed, ...
+ * These can be tuned for specific use cases, e.g. if isochronous transfers
+ * are very important, bandwidth can be sacrificed to guarantee that the
+ * 1ms deadline will be met.
+ * If bulk transfers are important, the MAX_FRAME_BW can be increased,
+ * but some (or many) isochronous deadlines might not be met.
+ *
+ * The values are specified in bittime.
+ */
+
+/*
+ * The current implementation switches between _STD (default) and _ISO (when
+ * isochronous transfers are scheduled), in order to optimize the throughput
+ * in normal circumstances, but also provide good isochronous behaviour.
+ *
+ * Bandwidth is described in bit time so with a 12MHz USB clock and 1ms
+ * frames; there are 12000 bit times per frame.
+ */
+
+#define TOTAL_FRAME_BW		12000
+#define DEFAULT_EOT		2250
+
+#define MAX_FRAME_BW_STD	(TOTAL_FRAME_BW - DEFAULT_EOT)
+#define MAX_FRAME_BW_ISO	2400
+
+/*
+ * Periodic transfers may only use 90% of the full frame, but as
+ * we currently don't even use 90% of the full frame, we may
+ * use the full usable time for periodic transfers.
+ */
+#define MAX_PERIODIC_BW(full_bw)	full_bw
+
+/* -------------------------------------------------------------------------- */
+
+struct c67x00_hcd {
+	spinlock_t lock;
+	struct c67x00_sie *sie;
+	unsigned int low_speed_ports;	/* bitmask of low speed ports */
+	unsigned int urb_count;
+	unsigned int urb_iso_count;
+
+	struct list_head list[4];	/* iso, int, ctrl, bulk */
+#if PIPE_BULK != 3
+#error "Sanity check failed, this code presumes PIPE_... to range from 0 to 3"
+#endif
+
+	/* USB bandwidth allocated to td_list */
+	int bandwidth_allocated;
+	/* USB bandwidth allocated for isoc/int transfer */
+	int periodic_bw_allocated;
+	struct list_head td_list;
+	int max_frame_bw;
+
+	u16 td_base_addr;
+	u16 buf_base_addr;
+	u16 next_td_addr;
+	u16 next_buf_addr;
+
+	struct work_struct work;
+
+	struct completion endpoint_disable;
+
+	u16 current_frame;
+	u16 last_frame;
+};
+
+static inline struct c67x00_hcd *hcd_to_c67x00_hcd(struct usb_hcd *hcd)
+{
+	return (struct c67x00_hcd *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *c67x00_hcd_to_hcd(struct c67x00_hcd *c67x00)
+{
+	return container_of((void *)c67x00, struct usb_hcd, hcd_priv);
+}
+
+/* ---------------------------------------------------------------------
+ * Functions used by c67x00-drv
+ */
+
+int c67x00_hcd_probe(struct c67x00_sie *sie);
+void c67x00_hcd_remove(struct c67x00_sie *sie);
+
+/* ---------------------------------------------------------------------
+ * Transfer Descriptor scheduling functions
+ */
+int c67x00_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
+int c67x00_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
+void c67x00_endpoint_disable(struct usb_hcd *hcd,
+			     struct usb_host_endpoint *ep);
+
+void c67x00_hcd_msg_received(struct c67x00_sie *sie, u16 msg);
+void c67x00_sched_kick(struct c67x00_hcd *c67x00);
+int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00);
+void c67x00_sched_stop_scheduler(struct c67x00_hcd *c67x00);
+
+#define c67x00_hcd_dev(x)	(c67x00_hcd_to_hcd(x)->self.controller)
+
+#endif				/* _USB_C67X00_HCD_H */
diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c
new file mode 100644
index 000000000..7a214a3a6
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-ll-hpi.c
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * c67x00-ll-hpi.c: Cypress C67X00 USB Low level interface using HPI
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ */
+
+#include <asm/byteorder.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/usb/c67x00.h>
+#include "c67x00.h"
+
+#define COMM_REGS 14
+
+struct c67x00_lcp_int_data {
+	u16 regs[COMM_REGS];
+};
+
+/* -------------------------------------------------------------------------- */
+/* Interface definitions */
+
+#define COMM_ACK			0x0FED
+#define COMM_NAK			0xDEAD
+
+#define COMM_RESET			0xFA50
+#define COMM_EXEC_INT			0xCE01
+#define COMM_INT_NUM			0x01C2
+
+/* Registers 0 to COMM_REGS-1 */
+#define COMM_R(x)			(0x01C4 + 2 * (x))
+
+#define HUSB_SIE_pCurrentTDPtr(x)	((x) ? 0x01B2 : 0x01B0)
+#define HUSB_SIE_pTDListDone_Sem(x)	((x) ? 0x01B8 : 0x01B6)
+#define HUSB_pEOT			0x01B4
+
+/* Software interrupts */
+/* 114, 115: */
+#define HUSB_SIE_INIT_INT(x)		((x) ? 0x0073 : 0x0072)
+#define HUSB_RESET_INT			0x0074
+
+#define SUSB_INIT_INT			0x0071
+#define SUSB_INIT_INT_LOC		(SUSB_INIT_INT * 2)
+
+/* -----------------------------------------------------------------------
+ * HPI implementation
+ *
+ * The c67x00 chip also support control via SPI or HSS serial
+ * interfaces. However, this driver assumes that register access can
+ * be performed from IRQ context. While this is a safe assumption with
+ * the HPI interface, it is not true for the serial interfaces.
+ */
+
+/* HPI registers */
+#define HPI_DATA	0
+#define HPI_MAILBOX	1
+#define HPI_ADDR	2
+#define HPI_STATUS	3
+
+/*
+ * According to CY7C67300 specification (tables 140 and 141) HPI read and
+ * write cycle duration Tcyc must be at least 6T long, where T is 1/48MHz,
+ * which is 125ns.
+ */
+#define HPI_T_CYC_NS	125
+
+static inline u16 hpi_read_reg(struct c67x00_device *dev, int reg)
+{
+	ndelay(HPI_T_CYC_NS);
+	return __raw_readw(dev->hpi.base + reg * dev->hpi.regstep);
+}
+
+static inline void hpi_write_reg(struct c67x00_device *dev, int reg, u16 value)
+{
+	ndelay(HPI_T_CYC_NS);
+	__raw_writew(value, dev->hpi.base + reg * dev->hpi.regstep);
+}
+
+static inline u16 hpi_read_word_nolock(struct c67x00_device *dev, u16 reg)
+{
+	hpi_write_reg(dev, HPI_ADDR, reg);
+	return hpi_read_reg(dev, HPI_DATA);
+}
+
+static u16 hpi_read_word(struct c67x00_device *dev, u16 reg)
+{
+	u16 value;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+	value = hpi_read_word_nolock(dev, reg);
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+	return value;
+}
+
+static void hpi_write_word_nolock(struct c67x00_device *dev, u16 reg, u16 value)
+{
+	hpi_write_reg(dev, HPI_ADDR, reg);
+	hpi_write_reg(dev, HPI_DATA, value);
+}
+
+static void hpi_write_word(struct c67x00_device *dev, u16 reg, u16 value)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+	hpi_write_word_nolock(dev, reg, value);
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+/*
+ * Only data is little endian, addr has cpu endianess
+ */
+static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr,
+				 __le16 *data, u16 count)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+
+	hpi_write_reg(dev, HPI_ADDR, addr);
+	for (i = 0; i < count; i++)
+		hpi_write_reg(dev, HPI_DATA, le16_to_cpu(*data++));
+
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+/*
+ * Only data is little endian, addr has cpu endianess
+ */
+static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr,
+				__le16 *data, u16 count)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+	hpi_write_reg(dev, HPI_ADDR, addr);
+	for (i = 0; i < count; i++)
+		*data++ = cpu_to_le16(hpi_read_reg(dev, HPI_DATA));
+
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+static void hpi_set_bits(struct c67x00_device *dev, u16 reg, u16 mask)
+{
+	u16 value;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+	value = hpi_read_word_nolock(dev, reg);
+	hpi_write_word_nolock(dev, reg, value | mask);
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+static void hpi_clear_bits(struct c67x00_device *dev, u16 reg, u16 mask)
+{
+	u16 value;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+	value = hpi_read_word_nolock(dev, reg);
+	hpi_write_word_nolock(dev, reg, value & ~mask);
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+static u16 hpi_recv_mbox(struct c67x00_device *dev)
+{
+	u16 value;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+	value = hpi_read_reg(dev, HPI_MAILBOX);
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+	return value;
+}
+
+static u16 hpi_send_mbox(struct c67x00_device *dev, u16 value)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+	hpi_write_reg(dev, HPI_MAILBOX, value);
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+	return value;
+}
+
+u16 c67x00_ll_hpi_status(struct c67x00_device *dev)
+{
+	u16 value;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+	value = hpi_read_reg(dev, HPI_STATUS);
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+	return value;
+}
+
+void c67x00_ll_hpi_reg_init(struct c67x00_device *dev)
+{
+	int i;
+
+	hpi_recv_mbox(dev);
+	c67x00_ll_hpi_status(dev);
+	hpi_write_word(dev, HPI_IRQ_ROUTING_REG, 0);
+
+	for (i = 0; i < C67X00_SIES; i++) {
+		hpi_write_word(dev, SIEMSG_REG(i), 0);
+		hpi_read_word(dev, SIEMSG_REG(i));
+	}
+}
+
+void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie)
+{
+	hpi_set_bits(sie->dev, HPI_IRQ_ROUTING_REG,
+		     SOFEOP_TO_HPI_EN(sie->sie_num));
+}
+
+void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie)
+{
+	hpi_clear_bits(sie->dev, HPI_IRQ_ROUTING_REG,
+		       SOFEOP_TO_HPI_EN(sie->sie_num));
+}
+
+/* -------------------------------------------------------------------------- */
+/* Transactions */
+
+static inline int ll_recv_msg(struct c67x00_device *dev)
+{
+	u16 res;
+
+	res = wait_for_completion_timeout(&dev->hpi.lcp.msg_received, 5 * HZ);
+	WARN_ON(!res);
+
+	return (res == 0) ? -EIO : 0;
+}
+
+/* -------------------------------------------------------------------------- */
+/* General functions */
+
+u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num)
+{
+	u16 val;
+
+	val = hpi_read_word(dev, SIEMSG_REG(sie_num));
+	/* clear register to allow next message */
+	hpi_write_word(dev, SIEMSG_REG(sie_num), 0);
+
+	return val;
+}
+
+u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie)
+{
+	return hpi_read_word(sie->dev, USB_CTL_REG(sie->sie_num));
+}
+
+/*
+ * c67x00_ll_usb_clear_status - clear the USB status bits
+ */
+void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits)
+{
+	hpi_write_word(sie->dev, USB_STAT_REG(sie->sie_num), bits);
+}
+
+u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie)
+{
+	return hpi_read_word(sie->dev, USB_STAT_REG(sie->sie_num));
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int c67x00_comm_exec_int(struct c67x00_device *dev, u16 nr,
+				struct c67x00_lcp_int_data *data)
+{
+	int i, rc;
+
+	mutex_lock(&dev->hpi.lcp.mutex);
+	hpi_write_word(dev, COMM_INT_NUM, nr);
+	for (i = 0; i < COMM_REGS; i++)
+		hpi_write_word(dev, COMM_R(i), data->regs[i]);
+	hpi_send_mbox(dev, COMM_EXEC_INT);
+	rc = ll_recv_msg(dev);
+	mutex_unlock(&dev->hpi.lcp.mutex);
+
+	return rc;
+}
+
+/* -------------------------------------------------------------------------- */
+/* Host specific functions */
+
+void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value)
+{
+	mutex_lock(&dev->hpi.lcp.mutex);
+	hpi_write_word(dev, HUSB_pEOT, value);
+	mutex_unlock(&dev->hpi.lcp.mutex);
+}
+
+static inline void c67x00_ll_husb_sie_init(struct c67x00_sie *sie)
+{
+	struct c67x00_device *dev = sie->dev;
+	struct c67x00_lcp_int_data data;
+	int rc;
+
+	rc = c67x00_comm_exec_int(dev, HUSB_SIE_INIT_INT(sie->sie_num), &data);
+	BUG_ON(rc); /* No return path for error code; crash spectacularly */
+}
+
+void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port)
+{
+	struct c67x00_device *dev = sie->dev;
+	struct c67x00_lcp_int_data data;
+	int rc;
+
+	data.regs[0] = 50;	/* Reset USB port for 50ms */
+	data.regs[1] = port | (sie->sie_num << 1);
+	rc = c67x00_comm_exec_int(dev, HUSB_RESET_INT, &data);
+	BUG_ON(rc); /* No return path for error code; crash spectacularly */
+}
+
+void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr)
+{
+	hpi_write_word(sie->dev, HUSB_SIE_pCurrentTDPtr(sie->sie_num), addr);
+}
+
+u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie)
+{
+	return hpi_read_word(sie->dev, HUSB_SIE_pCurrentTDPtr(sie->sie_num));
+}
+
+u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie)
+{
+	return hpi_read_word(sie->dev, HOST_FRAME_REG(sie->sie_num));
+}
+
+void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie)
+{
+	/* Set port into host mode */
+	hpi_set_bits(sie->dev, USB_CTL_REG(sie->sie_num), HOST_MODE);
+	c67x00_ll_husb_sie_init(sie);
+	/* Clear interrupts */
+	c67x00_ll_usb_clear_status(sie, HOST_STAT_MASK);
+	/* Check */
+	if (!(hpi_read_word(sie->dev, USB_CTL_REG(sie->sie_num)) & HOST_MODE))
+		dev_warn(sie_dev(sie),
+			 "SIE %d not set to host mode\n", sie->sie_num);
+}
+
+void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port)
+{
+	/* Clear connect change */
+	c67x00_ll_usb_clear_status(sie, PORT_CONNECT_CHANGE(port));
+
+	/* Enable interrupts */
+	hpi_set_bits(sie->dev, HPI_IRQ_ROUTING_REG,
+		     SOFEOP_TO_CPU_EN(sie->sie_num));
+	hpi_set_bits(sie->dev, HOST_IRQ_EN_REG(sie->sie_num),
+		     SOF_EOP_IRQ_EN | DONE_IRQ_EN);
+
+	/* Enable pull down transistors */
+	hpi_set_bits(sie->dev, USB_CTL_REG(sie->sie_num), PORT_RES_EN(port));
+}
+
+/* -------------------------------------------------------------------------- */
+
+void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status)
+{
+	if ((int_status & MBX_OUT_FLG) == 0)
+		return;
+
+	dev->hpi.lcp.last_msg = hpi_recv_mbox(dev);
+	complete(&dev->hpi.lcp.msg_received);
+}
+
+/* -------------------------------------------------------------------------- */
+
+int c67x00_ll_reset(struct c67x00_device *dev)
+{
+	int rc;
+
+	mutex_lock(&dev->hpi.lcp.mutex);
+	hpi_send_mbox(dev, COMM_RESET);
+	rc = ll_recv_msg(dev);
+	mutex_unlock(&dev->hpi.lcp.mutex);
+
+	return rc;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * c67x00_ll_write_mem_le16 - write into c67x00 memory
+ * Only data is little endian, addr has cpu endianess.
+ */
+void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
+			      void *data, int len)
+{
+	u8 *buf = data;
+
+	/* Sanity check */
+	if (addr + len > 0xffff) {
+		dev_err(&dev->pdev->dev,
+			"Trying to write beyond writable region!\n");
+		return;
+	}
+
+	if (addr & 0x01) {
+		/* unaligned access */
+		u16 tmp;
+		tmp = hpi_read_word(dev, addr - 1);
+		tmp = (tmp & 0x00ff) | (*buf++ << 8);
+		hpi_write_word(dev, addr - 1, tmp);
+		addr++;
+		len--;
+	}
+
+	hpi_write_words_le16(dev, addr, (__le16 *)buf, len / 2);
+	buf += len & ~0x01;
+	addr += len & ~0x01;
+	len &= 0x01;
+
+	if (len) {
+		u16 tmp;
+		tmp = hpi_read_word(dev, addr);
+		tmp = (tmp & 0xff00) | *buf;
+		hpi_write_word(dev, addr, tmp);
+	}
+}
+
+/*
+ * c67x00_ll_read_mem_le16 - read from c67x00 memory
+ * Only data is little endian, addr has cpu endianess.
+ */
+void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
+			     void *data, int len)
+{
+	u8 *buf = data;
+
+	if (addr & 0x01) {
+		/* unaligned access */
+		u16 tmp;
+		tmp = hpi_read_word(dev, addr - 1);
+		*buf++ = (tmp >> 8) & 0x00ff;
+		addr++;
+		len--;
+	}
+
+	hpi_read_words_le16(dev, addr, (__le16 *)buf, len / 2);
+	buf += len & ~0x01;
+	addr += len & ~0x01;
+	len &= 0x01;
+
+	if (len) {
+		u16 tmp;
+		tmp = hpi_read_word(dev, addr);
+		*buf = tmp & 0x00ff;
+	}
+}
+
+/* -------------------------------------------------------------------------- */
+
+void c67x00_ll_init(struct c67x00_device *dev)
+{
+	mutex_init(&dev->hpi.lcp.mutex);
+	init_completion(&dev->hpi.lcp.msg_received);
+}
+
+void c67x00_ll_release(struct c67x00_device *dev)
+{
+}
diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c
new file mode 100644
index 000000000..a09fa68a6
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-sched.c
@@ -0,0 +1,1148 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * c67x00-sched.c: Cypress C67X00 USB Host Controller Driver - TD scheduling
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ */
+
+#include <linux/kthread.h>
+#include <linux/slab.h>
+
+#include "c67x00.h"
+#include "c67x00-hcd.h"
+
+/*
+ * These are the stages for a control urb, they are kept
+ * in both urb->interval and td->privdata.
+ */
+#define SETUP_STAGE		0
+#define DATA_STAGE		1
+#define STATUS_STAGE		2
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * struct c67x00_ep_data: Host endpoint data structure
+ */
+struct c67x00_ep_data {
+	struct list_head queue;
+	struct list_head node;
+	struct usb_host_endpoint *hep;
+	struct usb_device *dev;
+	u16 next_frame;		/* For int/isoc transactions */
+};
+
+/*
+ * struct c67x00_td
+ *
+ * Hardware parts are little endiannes, SW in CPU endianess.
+ */
+struct c67x00_td {
+	/* HW specific part */
+	__le16 ly_base_addr;	/* Bytes 0-1 */
+	__le16 port_length;	/* Bytes 2-3 */
+	u8 pid_ep;		/* Byte 4 */
+	u8 dev_addr;		/* Byte 5 */
+	u8 ctrl_reg;		/* Byte 6 */
+	u8 status;		/* Byte 7 */
+	u8 retry_cnt;		/* Byte 8 */
+#define TT_OFFSET		2
+#define TT_CONTROL		0
+#define TT_ISOCHRONOUS		1
+#define TT_BULK			2
+#define TT_INTERRUPT		3
+	u8 residue;		/* Byte 9 */
+	__le16 next_td_addr;	/* Bytes 10-11 */
+	/* SW part */
+	struct list_head td_list;
+	u16 td_addr;
+	void *data;
+	struct urb *urb;
+	unsigned long privdata;
+
+	/* These are needed for handling the toggle bits:
+	 * an urb can be dequeued while a td is in progress
+	 * after checking the td, the toggle bit might need to
+	 * be fixed */
+	struct c67x00_ep_data *ep_data;
+	unsigned int pipe;
+};
+
+struct c67x00_urb_priv {
+	struct list_head hep_node;
+	struct urb *urb;
+	int port;
+	int cnt;		/* packet number for isoc */
+	int status;
+	struct c67x00_ep_data *ep_data;
+};
+
+#define td_udev(td)	((td)->ep_data->dev)
+
+#define CY_TD_SIZE		12
+
+#define TD_PIDEP_OFFSET		0x04
+#define TD_PIDEPMASK_PID	0xF0
+#define TD_PIDEPMASK_EP		0x0F
+#define TD_PORTLENMASK_DL	0x03FF
+#define TD_PORTLENMASK_PN	0xC000
+
+#define TD_STATUS_OFFSET	0x07
+#define TD_STATUSMASK_ACK	0x01
+#define TD_STATUSMASK_ERR	0x02
+#define TD_STATUSMASK_TMOUT	0x04
+#define TD_STATUSMASK_SEQ	0x08
+#define TD_STATUSMASK_SETUP	0x10
+#define TD_STATUSMASK_OVF	0x20
+#define TD_STATUSMASK_NAK	0x40
+#define TD_STATUSMASK_STALL	0x80
+
+#define TD_ERROR_MASK		(TD_STATUSMASK_ERR | TD_STATUSMASK_TMOUT | \
+				 TD_STATUSMASK_STALL)
+
+#define TD_RETRYCNT_OFFSET	0x08
+#define TD_RETRYCNTMASK_ACT_FLG	0x10
+#define TD_RETRYCNTMASK_TX_TYPE	0x0C
+#define TD_RETRYCNTMASK_RTY_CNT	0x03
+
+#define TD_RESIDUE_OVERFLOW	0x80
+
+#define TD_PID_IN		0x90
+
+/* Residue: signed 8bits, neg -> OVERFLOW, pos -> UNDERFLOW */
+#define td_residue(td)		((__s8)(td->residue))
+#define td_ly_base_addr(td)	(__le16_to_cpu((td)->ly_base_addr))
+#define td_port_length(td)	(__le16_to_cpu((td)->port_length))
+#define td_next_td_addr(td)	(__le16_to_cpu((td)->next_td_addr))
+
+#define td_active(td)		((td)->retry_cnt & TD_RETRYCNTMASK_ACT_FLG)
+#define td_length(td)		(td_port_length(td) & TD_PORTLENMASK_DL)
+
+#define td_sequence_ok(td)	(!td->status || \
+				 (!(td->status & TD_STATUSMASK_SEQ) ==	\
+				  !(td->ctrl_reg & SEQ_SEL)))
+
+#define td_acked(td)		(!td->status || \
+				 (td->status & TD_STATUSMASK_ACK))
+#define td_actual_bytes(td)	(td_length(td) - td_residue(td))
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * dbg_td - Dump the contents of the TD
+ */
+static void dbg_td(struct c67x00_hcd *c67x00, struct c67x00_td *td, char *msg)
+{
+	struct device *dev = c67x00_hcd_dev(c67x00);
+
+	dev_dbg(dev, "### %s at 0x%04x\n", msg, td->td_addr);
+	dev_dbg(dev, "urb:      0x%p\n", td->urb);
+	dev_dbg(dev, "endpoint:   %4d\n", usb_pipeendpoint(td->pipe));
+	dev_dbg(dev, "pipeout:    %4d\n", usb_pipeout(td->pipe));
+	dev_dbg(dev, "ly_base_addr: 0x%04x\n", td_ly_base_addr(td));
+	dev_dbg(dev, "port_length:  0x%04x\n", td_port_length(td));
+	dev_dbg(dev, "pid_ep:         0x%02x\n", td->pid_ep);
+	dev_dbg(dev, "dev_addr:       0x%02x\n", td->dev_addr);
+	dev_dbg(dev, "ctrl_reg:       0x%02x\n", td->ctrl_reg);
+	dev_dbg(dev, "status:         0x%02x\n", td->status);
+	dev_dbg(dev, "retry_cnt:      0x%02x\n", td->retry_cnt);
+	dev_dbg(dev, "residue:        0x%02x\n", td->residue);
+	dev_dbg(dev, "next_td_addr: 0x%04x\n", td_next_td_addr(td));
+	dev_dbg(dev, "data: %*ph\n", td_length(td), td->data);
+}
+
+/* -------------------------------------------------------------------------- */
+/* Helper functions */
+
+static inline u16 c67x00_get_current_frame_number(struct c67x00_hcd *c67x00)
+{
+	return c67x00_ll_husb_get_frame(c67x00->sie) & HOST_FRAME_MASK;
+}
+
+/*
+ * frame_add
+ * Software wraparound for framenumbers.
+ */
+static inline u16 frame_add(u16 a, u16 b)
+{
+	return (a + b) & HOST_FRAME_MASK;
+}
+
+/*
+ * frame_after - is frame a after frame b
+ */
+static inline int frame_after(u16 a, u16 b)
+{
+	return ((HOST_FRAME_MASK + a - b) & HOST_FRAME_MASK) <
+	    (HOST_FRAME_MASK / 2);
+}
+
+/*
+ * frame_after_eq - is frame a after or equal to frame b
+ */
+static inline int frame_after_eq(u16 a, u16 b)
+{
+	return ((HOST_FRAME_MASK + 1 + a - b) & HOST_FRAME_MASK) <
+	    (HOST_FRAME_MASK / 2);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * c67x00_release_urb - remove link from all tds to this urb
+ * Disconnects the urb from it's tds, so that it can be given back.
+ * pre: urb->hcpriv != NULL
+ */
+static void c67x00_release_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+	struct c67x00_td *td;
+	struct c67x00_urb_priv *urbp;
+
+	BUG_ON(!urb);
+
+	c67x00->urb_count--;
+
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+		c67x00->urb_iso_count--;
+		if (c67x00->urb_iso_count == 0)
+			c67x00->max_frame_bw = MAX_FRAME_BW_STD;
+	}
+
+	/* TODO this might be not so efficient when we've got many urbs!
+	 * Alternatives:
+	 *   * only clear when needed
+	 *   * keep a list of tds with each urbp
+	 */
+	list_for_each_entry(td, &c67x00->td_list, td_list)
+		if (urb == td->urb)
+			td->urb = NULL;
+
+	urbp = urb->hcpriv;
+	urb->hcpriv = NULL;
+	list_del(&urbp->hep_node);
+	kfree(urbp);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static struct c67x00_ep_data *
+c67x00_ep_data_alloc(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+	struct usb_host_endpoint *hep = urb->ep;
+	struct c67x00_ep_data *ep_data;
+	int type;
+
+	c67x00->current_frame = c67x00_get_current_frame_number(c67x00);
+
+	/* Check if endpoint already has a c67x00_ep_data struct allocated */
+	if (hep->hcpriv) {
+		ep_data = hep->hcpriv;
+		if (frame_after(c67x00->current_frame, ep_data->next_frame))
+			ep_data->next_frame =
+			    frame_add(c67x00->current_frame, 1);
+		return hep->hcpriv;
+	}
+
+	/* Allocate and initialize a new c67x00 endpoint data structure */
+	ep_data = kzalloc(sizeof(*ep_data), GFP_ATOMIC);
+	if (!ep_data)
+		return NULL;
+
+	INIT_LIST_HEAD(&ep_data->queue);
+	INIT_LIST_HEAD(&ep_data->node);
+	ep_data->hep = hep;
+
+	/* hold a reference to udev as long as this endpoint lives,
+	 * this is needed to possibly fix the data toggle */
+	ep_data->dev = usb_get_dev(urb->dev);
+	hep->hcpriv = ep_data;
+
+	/* For ISOC and INT endpoints, start ASAP: */
+	ep_data->next_frame = frame_add(c67x00->current_frame, 1);
+
+	/* Add the endpoint data to one of the pipe lists; must be added
+	   in order of endpoint address */
+	type = usb_pipetype(urb->pipe);
+	if (list_empty(&ep_data->node)) {
+		list_add(&ep_data->node, &c67x00->list[type]);
+	} else {
+		struct c67x00_ep_data *prev;
+
+		list_for_each_entry(prev, &c67x00->list[type], node) {
+			if (prev->hep->desc.bEndpointAddress >
+			    hep->desc.bEndpointAddress) {
+				list_add(&ep_data->node, prev->node.prev);
+				break;
+			}
+		}
+	}
+
+	return ep_data;
+}
+
+static int c67x00_ep_data_free(struct usb_host_endpoint *hep)
+{
+	struct c67x00_ep_data *ep_data = hep->hcpriv;
+
+	if (!ep_data)
+		return 0;
+
+	if (!list_empty(&ep_data->queue))
+		return -EBUSY;
+
+	usb_put_dev(ep_data->dev);
+	list_del(&ep_data->queue);
+	list_del(&ep_data->node);
+
+	kfree(ep_data);
+	hep->hcpriv = NULL;
+
+	return 0;
+}
+
+void c67x00_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+	unsigned long flags;
+
+	if (!list_empty(&ep->urb_list))
+		dev_warn(c67x00_hcd_dev(c67x00), "error: urb list not empty\n");
+
+	spin_lock_irqsave(&c67x00->lock, flags);
+
+	/* loop waiting for all transfers in the endpoint queue to complete */
+	while (c67x00_ep_data_free(ep)) {
+		/* Drop the lock so we can sleep waiting for the hardware */
+		spin_unlock_irqrestore(&c67x00->lock, flags);
+
+		/* it could happen that we reinitialize this completion, while
+		 * somebody was waiting for that completion.  The timeout and
+		 * while loop handle such cases, but this might be improved */
+		reinit_completion(&c67x00->endpoint_disable);
+		c67x00_sched_kick(c67x00);
+		wait_for_completion_timeout(&c67x00->endpoint_disable, 1 * HZ);
+
+		spin_lock_irqsave(&c67x00->lock, flags);
+	}
+
+	spin_unlock_irqrestore(&c67x00->lock, flags);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static inline int get_root_port(struct usb_device *dev)
+{
+	while (dev->parent->parent)
+		dev = dev->parent;
+	return dev->portnum;
+}
+
+int c67x00_urb_enqueue(struct usb_hcd *hcd,
+		       struct urb *urb, gfp_t mem_flags)
+{
+	int ret;
+	unsigned long flags;
+	struct c67x00_urb_priv *urbp;
+	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+	int port = get_root_port(urb->dev)-1;
+
+	/* Allocate and initialize urb private data */
+	urbp = kzalloc(sizeof(*urbp), mem_flags);
+	if (!urbp) {
+		ret = -ENOMEM;
+		goto err_urbp;
+	}
+
+	spin_lock_irqsave(&c67x00->lock, flags);
+
+	/* Make sure host controller is running */
+	if (!HC_IS_RUNNING(hcd->state)) {
+		ret = -ENODEV;
+		goto err_not_linked;
+	}
+
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret)
+		goto err_not_linked;
+
+	INIT_LIST_HEAD(&urbp->hep_node);
+	urbp->urb = urb;
+	urbp->port = port;
+
+	urbp->ep_data = c67x00_ep_data_alloc(c67x00, urb);
+
+	if (!urbp->ep_data) {
+		ret = -ENOMEM;
+		goto err_epdata;
+	}
+
+	/* TODO claim bandwidth with usb_claim_bandwidth?
+	 * also release it somewhere! */
+
+	urb->hcpriv = urbp;
+
+	urb->actual_length = 0;	/* Nothing received/transmitted yet */
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_CONTROL:
+		urb->interval = SETUP_STAGE;
+		break;
+	case PIPE_INTERRUPT:
+		break;
+	case PIPE_BULK:
+		break;
+	case PIPE_ISOCHRONOUS:
+		if (c67x00->urb_iso_count == 0)
+			c67x00->max_frame_bw = MAX_FRAME_BW_ISO;
+		c67x00->urb_iso_count++;
+		/* Assume always URB_ISO_ASAP, FIXME */
+		if (list_empty(&urbp->ep_data->queue))
+			urb->start_frame = urbp->ep_data->next_frame;
+		else {
+			/* Go right after the last one */
+			struct urb *last_urb;
+
+			last_urb = list_entry(urbp->ep_data->queue.prev,
+					      struct c67x00_urb_priv,
+					      hep_node)->urb;
+			urb->start_frame =
+			    frame_add(last_urb->start_frame,
+				      last_urb->number_of_packets *
+				      last_urb->interval);
+		}
+		urbp->cnt = 0;
+		break;
+	}
+
+	/* Add the URB to the endpoint queue */
+	list_add_tail(&urbp->hep_node, &urbp->ep_data->queue);
+
+	/* If this is the only URB, kick start the controller */
+	if (!c67x00->urb_count++)
+		c67x00_ll_hpi_enable_sofeop(c67x00->sie);
+
+	c67x00_sched_kick(c67x00);
+	spin_unlock_irqrestore(&c67x00->lock, flags);
+
+	return 0;
+
+err_epdata:
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+err_not_linked:
+	spin_unlock_irqrestore(&c67x00->lock, flags);
+	kfree(urbp);
+err_urbp:
+
+	return ret;
+}
+
+int c67x00_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&c67x00->lock, flags);
+	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (rc)
+		goto done;
+
+	c67x00_release_urb(c67x00, urb);
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+	spin_unlock(&c67x00->lock);
+	usb_hcd_giveback_urb(hcd, urb, status);
+	spin_lock(&c67x00->lock);
+
+	spin_unlock_irqrestore(&c67x00->lock, flags);
+
+	return 0;
+
+ done:
+	spin_unlock_irqrestore(&c67x00->lock, flags);
+	return rc;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * pre: c67x00 locked, urb unlocked
+ */
+static void
+c67x00_giveback_urb(struct c67x00_hcd *c67x00, struct urb *urb, int status)
+{
+	struct c67x00_urb_priv *urbp;
+
+	if (!urb)
+		return;
+
+	urbp = urb->hcpriv;
+	urbp->status = status;
+
+	list_del_init(&urbp->hep_node);
+
+	c67x00_release_urb(c67x00, urb);
+	usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb);
+	spin_unlock(&c67x00->lock);
+	usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, status);
+	spin_lock(&c67x00->lock);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int c67x00_claim_frame_bw(struct c67x00_hcd *c67x00, struct urb *urb,
+				 int len, int periodic)
+{
+	struct c67x00_urb_priv *urbp = urb->hcpriv;
+	int bit_time;
+
+	/* According to the C67x00 BIOS user manual, page 3-18,19, the
+	 * following calculations provide the full speed bit times for
+	 * a transaction.
+	 *
+	 * FS(in)	= 112.5 +  9.36*BC + HOST_DELAY
+	 * FS(in,iso)	=  90.5 +  9.36*BC + HOST_DELAY
+	 * FS(out)	= 112.5 +  9.36*BC + HOST_DELAY
+	 * FS(out,iso)	=  78.4 +  9.36*BC + HOST_DELAY
+	 * LS(in)	= 802.4 + 75.78*BC + HOST_DELAY
+	 * LS(out)	= 802.6 + 74.67*BC + HOST_DELAY
+	 *
+	 * HOST_DELAY == 106 for the c67200 and c67300.
+	 */
+
+	/* make calculations in 1/100 bit times to maintain resolution */
+	if (urbp->ep_data->dev->speed == USB_SPEED_LOW) {
+		/* Low speed pipe */
+		if (usb_pipein(urb->pipe))
+			bit_time = 80240 + 7578*len;
+		else
+			bit_time = 80260 + 7467*len;
+	} else {
+		/* FS pipes */
+		if (usb_pipeisoc(urb->pipe))
+			bit_time = usb_pipein(urb->pipe) ? 9050 : 7840;
+		else
+			bit_time = 11250;
+		bit_time += 936*len;
+	}
+
+	/* Scale back down to integer bit times.  Use a host delay of 106.
+	 * (this is the only place it is used) */
+	bit_time = ((bit_time+50) / 100) + 106;
+
+	if (unlikely(bit_time + c67x00->bandwidth_allocated >=
+		     c67x00->max_frame_bw))
+		return -EMSGSIZE;
+
+	if (unlikely(c67x00->next_td_addr + CY_TD_SIZE >=
+		     c67x00->td_base_addr + SIE_TD_SIZE))
+		return -EMSGSIZE;
+
+	if (unlikely(c67x00->next_buf_addr + len >=
+		     c67x00->buf_base_addr + SIE_TD_BUF_SIZE))
+		return -EMSGSIZE;
+
+	if (periodic) {
+		if (unlikely(bit_time + c67x00->periodic_bw_allocated >=
+			     MAX_PERIODIC_BW(c67x00->max_frame_bw)))
+			return -EMSGSIZE;
+		c67x00->periodic_bw_allocated += bit_time;
+	}
+
+	c67x00->bandwidth_allocated += bit_time;
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * td_addr and buf_addr must be word aligned
+ */
+static int c67x00_create_td(struct c67x00_hcd *c67x00, struct urb *urb,
+			    void *data, int len, int pid, int toggle,
+			    unsigned long privdata)
+{
+	struct c67x00_td *td;
+	struct c67x00_urb_priv *urbp = urb->hcpriv;
+	const __u8 active_flag = 1, retry_cnt = 3;
+	__u8 cmd = 0;
+	int tt = 0;
+
+	if (c67x00_claim_frame_bw(c67x00, urb, len, usb_pipeisoc(urb->pipe)
+				  || usb_pipeint(urb->pipe)))
+		return -EMSGSIZE;	/* Not really an error, but expected */
+
+	td = kzalloc(sizeof(*td), GFP_ATOMIC);
+	if (!td)
+		return -ENOMEM;
+
+	td->pipe = urb->pipe;
+	td->ep_data = urbp->ep_data;
+
+	if ((td_udev(td)->speed == USB_SPEED_LOW) &&
+	    !(c67x00->low_speed_ports & (1 << urbp->port)))
+		cmd |= PREAMBLE_EN;
+
+	switch (usb_pipetype(td->pipe)) {
+	case PIPE_ISOCHRONOUS:
+		tt = TT_ISOCHRONOUS;
+		cmd |= ISO_EN;
+		break;
+	case PIPE_CONTROL:
+		tt = TT_CONTROL;
+		break;
+	case PIPE_BULK:
+		tt = TT_BULK;
+		break;
+	case PIPE_INTERRUPT:
+		tt = TT_INTERRUPT;
+		break;
+	}
+
+	if (toggle)
+		cmd |= SEQ_SEL;
+
+	cmd |= ARM_EN;
+
+	/* SW part */
+	td->td_addr = c67x00->next_td_addr;
+	c67x00->next_td_addr = c67x00->next_td_addr + CY_TD_SIZE;
+
+	/* HW part */
+	td->ly_base_addr = __cpu_to_le16(c67x00->next_buf_addr);
+	td->port_length = __cpu_to_le16((c67x00->sie->sie_num << 15) |
+					(urbp->port << 14) | (len & 0x3FF));
+	td->pid_ep = ((pid & 0xF) << TD_PIDEP_OFFSET) |
+	    (usb_pipeendpoint(td->pipe) & 0xF);
+	td->dev_addr = usb_pipedevice(td->pipe) & 0x7F;
+	td->ctrl_reg = cmd;
+	td->status = 0;
+	td->retry_cnt = (tt << TT_OFFSET) | (active_flag << 4) | retry_cnt;
+	td->residue = 0;
+	td->next_td_addr = __cpu_to_le16(c67x00->next_td_addr);
+
+	/* SW part */
+	td->data = data;
+	td->urb = urb;
+	td->privdata = privdata;
+
+	c67x00->next_buf_addr += (len + 1) & ~0x01;	/* properly align */
+
+	list_add_tail(&td->td_list, &c67x00->td_list);
+	return 0;
+}
+
+static inline void c67x00_release_td(struct c67x00_td *td)
+{
+	list_del_init(&td->td_list);
+	kfree(td);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int c67x00_add_data_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+	int remaining;
+	int toggle;
+	int pid;
+	int ret = 0;
+	int maxps;
+	int need_empty;
+
+	toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			       usb_pipeout(urb->pipe));
+	remaining = urb->transfer_buffer_length - urb->actual_length;
+
+	maxps = usb_maxpacket(urb->dev, urb->pipe);
+
+	need_empty = (urb->transfer_flags & URB_ZERO_PACKET) &&
+	    usb_pipeout(urb->pipe) && !(remaining % maxps);
+
+	while (remaining || need_empty) {
+		int len;
+		char *td_buf;
+
+		len = (remaining > maxps) ? maxps : remaining;
+		if (!len)
+			need_empty = 0;
+
+		pid = usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
+		td_buf = urb->transfer_buffer + urb->transfer_buffer_length -
+		    remaining;
+		ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, toggle,
+				       DATA_STAGE);
+		if (ret)
+			return ret;	/* td wasn't created */
+
+		toggle ^= 1;
+		remaining -= len;
+		if (usb_pipecontrol(urb->pipe))
+			break;
+	}
+
+	return 0;
+}
+
+/*
+ * return 0 in case more bandwidth is available, else errorcode
+ */
+static int c67x00_add_ctrl_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+	int ret;
+	int pid;
+
+	switch (urb->interval) {
+	default:
+	case SETUP_STAGE:
+		ret = c67x00_create_td(c67x00, urb, urb->setup_packet,
+				       8, USB_PID_SETUP, 0, SETUP_STAGE);
+		if (ret)
+			return ret;
+		urb->interval = SETUP_STAGE;
+		usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			      usb_pipeout(urb->pipe), 1);
+		break;
+	case DATA_STAGE:
+		if (urb->transfer_buffer_length) {
+			ret = c67x00_add_data_urb(c67x00, urb);
+			if (ret)
+				return ret;
+			break;
+		}
+		fallthrough;
+	case STATUS_STAGE:
+		pid = !usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
+		ret = c67x00_create_td(c67x00, urb, NULL, 0, pid, 1,
+				       STATUS_STAGE);
+		if (ret)
+			return ret;
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ * return 0 in case more bandwidth is available, else errorcode
+ */
+static int c67x00_add_int_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+	struct c67x00_urb_priv *urbp = urb->hcpriv;
+
+	if (frame_after_eq(c67x00->current_frame, urbp->ep_data->next_frame)) {
+		urbp->ep_data->next_frame =
+		    frame_add(urbp->ep_data->next_frame, urb->interval);
+		return c67x00_add_data_urb(c67x00, urb);
+	}
+	return 0;
+}
+
+static int c67x00_add_iso_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+	struct c67x00_urb_priv *urbp = urb->hcpriv;
+
+	if (frame_after_eq(c67x00->current_frame, urbp->ep_data->next_frame)) {
+		char *td_buf;
+		int len, pid, ret;
+
+		BUG_ON(urbp->cnt >= urb->number_of_packets);
+
+		td_buf = urb->transfer_buffer +
+		    urb->iso_frame_desc[urbp->cnt].offset;
+		len = urb->iso_frame_desc[urbp->cnt].length;
+		pid = usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
+
+		ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, 0,
+				       urbp->cnt);
+		if (ret) {
+			dev_dbg(c67x00_hcd_dev(c67x00), "create failed: %d\n",
+				ret);
+			urb->iso_frame_desc[urbp->cnt].actual_length = 0;
+			urb->iso_frame_desc[urbp->cnt].status = ret;
+			if (urbp->cnt + 1 == urb->number_of_packets)
+				c67x00_giveback_urb(c67x00, urb, 0);
+		}
+
+		urbp->ep_data->next_frame =
+		    frame_add(urbp->ep_data->next_frame, urb->interval);
+		urbp->cnt++;
+	}
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static void c67x00_fill_from_list(struct c67x00_hcd *c67x00, int type,
+				  int (*add)(struct c67x00_hcd *, struct urb *))
+{
+	struct c67x00_ep_data *ep_data;
+	struct urb *urb;
+
+	/* traverse every endpoint on the list */
+	list_for_each_entry(ep_data, &c67x00->list[type], node) {
+		if (!list_empty(&ep_data->queue)) {
+			/* and add the first urb */
+			/* isochronous transfer rely on this */
+			urb = list_entry(ep_data->queue.next,
+					 struct c67x00_urb_priv,
+					 hep_node)->urb;
+			add(c67x00, urb);
+		}
+	}
+}
+
+static void c67x00_fill_frame(struct c67x00_hcd *c67x00)
+{
+	struct c67x00_td *td, *ttd;
+
+	/* Check if we can proceed */
+	if (!list_empty(&c67x00->td_list)) {
+		dev_warn(c67x00_hcd_dev(c67x00),
+			 "TD list not empty! This should not happen!\n");
+		list_for_each_entry_safe(td, ttd, &c67x00->td_list, td_list) {
+			dbg_td(c67x00, td, "Unprocessed td");
+			c67x00_release_td(td);
+		}
+	}
+
+	/* Reinitialize variables */
+	c67x00->bandwidth_allocated = 0;
+	c67x00->periodic_bw_allocated = 0;
+
+	c67x00->next_td_addr = c67x00->td_base_addr;
+	c67x00->next_buf_addr = c67x00->buf_base_addr;
+
+	/* Fill the list */
+	c67x00_fill_from_list(c67x00, PIPE_ISOCHRONOUS, c67x00_add_iso_urb);
+	c67x00_fill_from_list(c67x00, PIPE_INTERRUPT, c67x00_add_int_urb);
+	c67x00_fill_from_list(c67x00, PIPE_CONTROL, c67x00_add_ctrl_urb);
+	c67x00_fill_from_list(c67x00, PIPE_BULK, c67x00_add_data_urb);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * Get TD from C67X00
+ */
+static inline void
+c67x00_parse_td(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+	c67x00_ll_read_mem_le16(c67x00->sie->dev,
+				td->td_addr, td, CY_TD_SIZE);
+
+	if (usb_pipein(td->pipe) && td_actual_bytes(td))
+		c67x00_ll_read_mem_le16(c67x00->sie->dev, td_ly_base_addr(td),
+					td->data, td_actual_bytes(td));
+}
+
+static int c67x00_td_to_error(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+	if (td->status & TD_STATUSMASK_ERR) {
+		dbg_td(c67x00, td, "ERROR_FLAG");
+		return -EILSEQ;
+	}
+	if (td->status & TD_STATUSMASK_STALL) {
+		/* dbg_td(c67x00, td, "STALL"); */
+		return -EPIPE;
+	}
+	if (td->status & TD_STATUSMASK_TMOUT) {
+		dbg_td(c67x00, td, "TIMEOUT");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static inline int c67x00_end_of_data(struct c67x00_td *td)
+{
+	int maxps, need_empty, remaining;
+	struct urb *urb = td->urb;
+	int act_bytes;
+
+	act_bytes = td_actual_bytes(td);
+
+	if (unlikely(!act_bytes))
+		return 1;	/* This was an empty packet */
+
+	maxps = usb_maxpacket(td_udev(td), td->pipe);
+
+	if (unlikely(act_bytes < maxps))
+		return 1;	/* Smaller then full packet */
+
+	remaining = urb->transfer_buffer_length - urb->actual_length;
+	need_empty = (urb->transfer_flags & URB_ZERO_PACKET) &&
+	    usb_pipeout(urb->pipe) && !(remaining % maxps);
+
+	if (unlikely(!remaining && !need_empty))
+		return 1;
+
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/* Remove all td's from the list which come
+ * after last_td and are meant for the same pipe.
+ * This is used when a short packet has occurred */
+static inline void c67x00_clear_pipe(struct c67x00_hcd *c67x00,
+				     struct c67x00_td *last_td)
+{
+	struct c67x00_td *td, *tmp;
+	td = last_td;
+	tmp = last_td;
+	while (td->td_list.next != &c67x00->td_list) {
+		td = list_entry(td->td_list.next, struct c67x00_td, td_list);
+		if (td->pipe == last_td->pipe) {
+			c67x00_release_td(td);
+			td = tmp;
+		}
+		tmp = td;
+	}
+}
+
+/* -------------------------------------------------------------------------- */
+
+static void c67x00_handle_successful_td(struct c67x00_hcd *c67x00,
+					struct c67x00_td *td)
+{
+	struct urb *urb = td->urb;
+
+	if (!urb)
+		return;
+
+	urb->actual_length += td_actual_bytes(td);
+
+	switch (usb_pipetype(td->pipe)) {
+		/* isochronous tds are handled separately */
+	case PIPE_CONTROL:
+		switch (td->privdata) {
+		case SETUP_STAGE:
+			urb->interval =
+			    urb->transfer_buffer_length ?
+			    DATA_STAGE : STATUS_STAGE;
+			/* Don't count setup_packet with normal data: */
+			urb->actual_length = 0;
+			break;
+
+		case DATA_STAGE:
+			if (c67x00_end_of_data(td)) {
+				urb->interval = STATUS_STAGE;
+				c67x00_clear_pipe(c67x00, td);
+			}
+			break;
+
+		case STATUS_STAGE:
+			urb->interval = 0;
+			c67x00_giveback_urb(c67x00, urb, 0);
+			break;
+		}
+		break;
+
+	case PIPE_INTERRUPT:
+	case PIPE_BULK:
+		if (unlikely(c67x00_end_of_data(td))) {
+			c67x00_clear_pipe(c67x00, td);
+			c67x00_giveback_urb(c67x00, urb, 0);
+		}
+		break;
+	}
+}
+
+static void c67x00_handle_isoc(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+	struct urb *urb = td->urb;
+	int cnt;
+
+	if (!urb)
+		return;
+
+	cnt = td->privdata;
+
+	if (td->status & TD_ERROR_MASK)
+		urb->error_count++;
+
+	urb->iso_frame_desc[cnt].actual_length = td_actual_bytes(td);
+	urb->iso_frame_desc[cnt].status = c67x00_td_to_error(c67x00, td);
+	if (cnt + 1 == urb->number_of_packets)	/* Last packet */
+		c67x00_giveback_urb(c67x00, urb, 0);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * c67x00_check_td_list - handle tds which have been processed by the c67x00
+ * pre: current_td == 0
+ */
+static inline void c67x00_check_td_list(struct c67x00_hcd *c67x00)
+{
+	struct c67x00_td *td, *tmp;
+	struct urb *urb;
+	int ack_ok;
+	int clear_endpoint;
+
+	list_for_each_entry_safe(td, tmp, &c67x00->td_list, td_list) {
+		/* get the TD */
+		c67x00_parse_td(c67x00, td);
+		urb = td->urb;	/* urb can be NULL! */
+		ack_ok = 0;
+		clear_endpoint = 1;
+
+		/* Handle isochronous transfers separately */
+		if (usb_pipeisoc(td->pipe)) {
+			clear_endpoint = 0;
+			c67x00_handle_isoc(c67x00, td);
+			goto cont;
+		}
+
+		/* When an error occurs, all td's for that pipe go into an
+		 * inactive state. This state matches successful transfers so
+		 * we must make sure not to service them. */
+		if (td->status & TD_ERROR_MASK) {
+			c67x00_giveback_urb(c67x00, urb,
+					    c67x00_td_to_error(c67x00, td));
+			goto cont;
+		}
+
+		if ((td->status & TD_STATUSMASK_NAK) || !td_sequence_ok(td) ||
+		    !td_acked(td))
+			goto cont;
+
+		/* Sequence ok and acked, don't need to fix toggle */
+		ack_ok = 1;
+
+		if (unlikely(td->status & TD_STATUSMASK_OVF)) {
+			if (td_residue(td) & TD_RESIDUE_OVERFLOW) {
+				/* Overflow */
+				c67x00_giveback_urb(c67x00, urb, -EOVERFLOW);
+				goto cont;
+			}
+		}
+
+		clear_endpoint = 0;
+		c67x00_handle_successful_td(c67x00, td);
+
+cont:
+		if (clear_endpoint)
+			c67x00_clear_pipe(c67x00, td);
+		if (ack_ok)
+			usb_settoggle(td_udev(td), usb_pipeendpoint(td->pipe),
+				      usb_pipeout(td->pipe),
+				      !(td->ctrl_reg & SEQ_SEL));
+		/* next in list could have been removed, due to clear_pipe! */
+		tmp = list_entry(td->td_list.next, typeof(*td), td_list);
+		c67x00_release_td(td);
+	}
+}
+
+/* -------------------------------------------------------------------------- */
+
+static inline int c67x00_all_tds_processed(struct c67x00_hcd *c67x00)
+{
+	/* If all tds are processed, we can check the previous frame (if
+	 * there was any) and start our next frame.
+	 */
+	return !c67x00_ll_husb_get_current_td(c67x00->sie);
+}
+
+/*
+ * Send td to C67X00
+ */
+static void c67x00_send_td(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+	int len = td_length(td);
+
+	if (len && ((td->pid_ep & TD_PIDEPMASK_PID) != TD_PID_IN))
+		c67x00_ll_write_mem_le16(c67x00->sie->dev, td_ly_base_addr(td),
+					 td->data, len);
+
+	c67x00_ll_write_mem_le16(c67x00->sie->dev,
+				 td->td_addr, td, CY_TD_SIZE);
+}
+
+static void c67x00_send_frame(struct c67x00_hcd *c67x00)
+{
+	struct c67x00_td *td;
+
+	if (list_empty(&c67x00->td_list))
+		dev_warn(c67x00_hcd_dev(c67x00),
+			 "%s: td list should not be empty here!\n",
+			 __func__);
+
+	list_for_each_entry(td, &c67x00->td_list, td_list) {
+		if (td->td_list.next == &c67x00->td_list)
+			td->next_td_addr = 0;	/* Last td in list */
+
+		c67x00_send_td(c67x00, td);
+	}
+
+	c67x00_ll_husb_set_current_td(c67x00->sie, c67x00->td_base_addr);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * c67x00_do_work - Schedulers state machine
+ */
+static void c67x00_do_work(struct c67x00_hcd *c67x00)
+{
+	spin_lock(&c67x00->lock);
+	/* Make sure all tds are processed */
+	if (!c67x00_all_tds_processed(c67x00))
+		goto out;
+
+	c67x00_check_td_list(c67x00);
+
+	/* no td's are being processed (current == 0)
+	 * and all have been "checked" */
+	complete(&c67x00->endpoint_disable);
+
+	if (!list_empty(&c67x00->td_list))
+		goto out;
+
+	c67x00->current_frame = c67x00_get_current_frame_number(c67x00);
+	if (c67x00->current_frame == c67x00->last_frame)
+		goto out;	/* Don't send tds in same frame */
+	c67x00->last_frame = c67x00->current_frame;
+
+	/* If no urbs are scheduled, our work is done */
+	if (!c67x00->urb_count) {
+		c67x00_ll_hpi_disable_sofeop(c67x00->sie);
+		goto out;
+	}
+
+	c67x00_fill_frame(c67x00);
+	if (!list_empty(&c67x00->td_list))
+		/* TD's have been added to the frame */
+		c67x00_send_frame(c67x00);
+
+ out:
+	spin_unlock(&c67x00->lock);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static void c67x00_sched_work(struct work_struct *work)
+{
+	struct c67x00_hcd *c67x00;
+
+	c67x00 = container_of(work, struct c67x00_hcd, work);
+	c67x00_do_work(c67x00);
+}
+
+void c67x00_sched_kick(struct c67x00_hcd *c67x00)
+{
+	queue_work(system_highpri_wq, &c67x00->work);
+}
+
+int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00)
+{
+	INIT_WORK(&c67x00->work, c67x00_sched_work);
+	return 0;
+}
+
+void c67x00_sched_stop_scheduler(struct c67x00_hcd *c67x00)
+{
+	cancel_work_sync(&c67x00->work);
+}
diff --git a/drivers/usb/c67x00/c67x00.h b/drivers/usb/c67x00/c67x00.h
new file mode 100644
index 000000000..a4456d0ff
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00.h
@@ -0,0 +1,280 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * c67x00.h: Cypress C67X00 USB register and field definitions
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ */
+
+#ifndef _USB_C67X00_H
+#define _USB_C67X00_H
+
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+
+/* ---------------------------------------------------------------------
+ * Cypress C67x00 register definitions
+ */
+
+/* Hardware Revision Register */
+#define HW_REV_REG		0xC004
+
+/* General USB registers */
+/* ===================== */
+
+/* USB Control Register */
+#define USB_CTL_REG(x)		((x) ? 0xC0AA : 0xC08A)
+
+#define LOW_SPEED_PORT(x)	((x) ? 0x0800 : 0x0400)
+#define HOST_MODE		0x0200
+#define PORT_RES_EN(x)		((x) ? 0x0100 : 0x0080)
+#define SOF_EOP_EN(x)		((x) ? 0x0002 : 0x0001)
+
+/* USB status register - Notice it has different content in hcd/udc mode */
+#define USB_STAT_REG(x)		((x) ? 0xC0B0 : 0xC090)
+
+#define EP0_IRQ_FLG		0x0001
+#define EP1_IRQ_FLG		0x0002
+#define EP2_IRQ_FLG		0x0004
+#define EP3_IRQ_FLG		0x0008
+#define EP4_IRQ_FLG		0x0010
+#define EP5_IRQ_FLG		0x0020
+#define EP6_IRQ_FLG		0x0040
+#define EP7_IRQ_FLG		0x0080
+#define RESET_IRQ_FLG		0x0100
+#define SOF_EOP_IRQ_FLG		0x0200
+#define ID_IRQ_FLG		0x4000
+#define VBUS_IRQ_FLG		0x8000
+
+/* USB Host only registers */
+/* ======================= */
+
+/* Host n Control Register */
+#define HOST_CTL_REG(x)		((x) ? 0xC0A0 : 0xC080)
+
+#define PREAMBLE_EN		0x0080	/* Preamble enable */
+#define SEQ_SEL			0x0040	/* Data Toggle Sequence Bit Select */
+#define ISO_EN			0x0010	/* Isochronous enable  */
+#define ARM_EN			0x0001	/* Arm operation */
+
+/* Host n Interrupt Enable Register */
+#define HOST_IRQ_EN_REG(x)	((x) ? 0xC0AC : 0xC08C)
+
+#define SOF_EOP_IRQ_EN		0x0200	/* SOF/EOP Interrupt Enable  */
+#define SOF_EOP_TMOUT_IRQ_EN	0x0800	/* SOF/EOP Timeout Interrupt Enable  */
+#define ID_IRQ_EN		0x4000	/* ID interrupt enable */
+#define VBUS_IRQ_EN		0x8000	/* VBUS interrupt enable */
+#define DONE_IRQ_EN		0x0001	/* Done Interrupt Enable  */
+
+/* USB status register */
+#define HOST_STAT_MASK		0x02FD
+#define PORT_CONNECT_CHANGE(x)	((x) ? 0x0020 : 0x0010)
+#define PORT_SE0_STATUS(x)	((x) ? 0x0008 : 0x0004)
+
+/* Host Frame Register */
+#define HOST_FRAME_REG(x)	((x) ? 0xC0B6 : 0xC096)
+
+#define HOST_FRAME_MASK		0x07FF
+
+/* USB Peripheral only registers */
+/* ============================= */
+
+/* Device n Port Sel reg */
+#define DEVICE_N_PORT_SEL(x)	((x) ? 0xC0A4 : 0xC084)
+
+/* Device n Interrupt Enable Register */
+#define DEVICE_N_IRQ_EN_REG(x)	((x) ? 0xC0AC : 0xC08C)
+
+#define DEVICE_N_ENDPOINT_N_CTL_REG(dev, ep)	((dev)  		\
+						 ? (0x0280 + (ep << 4)) \
+						 : (0x0200 + (ep << 4)))
+#define DEVICE_N_ENDPOINT_N_STAT_REG(dev, ep)	((dev)			\
+						 ? (0x0286 + (ep << 4)) \
+						 : (0x0206 + (ep << 4)))
+
+#define DEVICE_N_ADDRESS(dev)	((dev) ? (0xC0AE) : (0xC08E))
+
+/* HPI registers */
+/* ============= */
+
+/* HPI Status register */
+#define SOFEOP_FLG(x)		(1 << ((x) ? 12 : 10))
+#define SIEMSG_FLG(x)		(1 << (4 + (x)))
+#define RESET_FLG(x)		((x) ? 0x0200 : 0x0002)
+#define DONE_FLG(x)		(1 << (2 + (x)))
+#define RESUME_FLG(x)		(1 << (6 + (x)))
+#define MBX_OUT_FLG		0x0001	/* Message out available */
+#define MBX_IN_FLG		0x0100
+#define ID_FLG			0x4000
+#define VBUS_FLG		0x8000
+
+/* Interrupt routing register */
+#define HPI_IRQ_ROUTING_REG	0x0142
+
+#define HPI_SWAP_ENABLE(x)	((x) ? 0x0100 : 0x0001)
+#define RESET_TO_HPI_ENABLE(x)	((x) ? 0x0200 : 0x0002)
+#define DONE_TO_HPI_ENABLE(x)	((x) ? 0x0008 : 0x0004)
+#define RESUME_TO_HPI_ENABLE(x)	((x) ? 0x0080 : 0x0040)
+#define SOFEOP_TO_HPI_EN(x)	((x) ? 0x2000 : 0x0800)
+#define SOFEOP_TO_CPU_EN(x)	((x) ? 0x1000 : 0x0400)
+#define ID_TO_HPI_ENABLE	0x4000
+#define VBUS_TO_HPI_ENABLE	0x8000
+
+/* SIE msg registers */
+#define SIEMSG_REG(x)		((x) ? 0x0148 : 0x0144)
+
+#define HUSB_TDListDone		0x1000
+
+#define SUSB_EP0_MSG		0x0001
+#define SUSB_EP1_MSG		0x0002
+#define SUSB_EP2_MSG		0x0004
+#define SUSB_EP3_MSG		0x0008
+#define SUSB_EP4_MSG		0x0010
+#define SUSB_EP5_MSG		0x0020
+#define SUSB_EP6_MSG		0x0040
+#define SUSB_EP7_MSG		0x0080
+#define SUSB_RST_MSG		0x0100
+#define SUSB_SOF_MSG		0x0200
+#define SUSB_CFG_MSG		0x0400
+#define SUSB_SUS_MSG		0x0800
+#define SUSB_ID_MSG	       	0x4000
+#define SUSB_VBUS_MSG		0x8000
+
+/* BIOS interrupt routines */
+
+#define SUSBx_RECEIVE_INT(x)	((x) ? 97 : 81)
+#define SUSBx_SEND_INT(x)	((x) ? 96 : 80)
+
+#define SUSBx_DEV_DESC_VEC(x)	((x) ? 0x00D4 : 0x00B4)
+#define SUSBx_CONF_DESC_VEC(x)	((x) ? 0x00D6 : 0x00B6)
+#define SUSBx_STRING_DESC_VEC(x) ((x) ? 0x00D8 : 0x00B8)
+
+#define CY_HCD_BUF_ADDR		0x500	/* Base address for host */
+#define SIE_TD_SIZE		0x200	/* size of the td list */
+#define SIE_TD_BUF_SIZE		0x400	/* size of the data buffer */
+
+#define SIE_TD_OFFSET(host)	((host) ? (SIE_TD_SIZE+SIE_TD_BUF_SIZE) : 0)
+#define SIE_BUF_OFFSET(host)	(SIE_TD_OFFSET(host) + SIE_TD_SIZE)
+
+/* Base address of HCD + 2 x TD_SIZE + 2 x TD_BUF_SIZE */
+#define CY_UDC_REQ_HEADER_BASE	0x1100
+/* 8- byte request headers for IN/OUT transfers */
+#define CY_UDC_REQ_HEADER_SIZE	8
+
+#define CY_UDC_REQ_HEADER_ADDR(ep_num)	(CY_UDC_REQ_HEADER_BASE + \
+					 ((ep_num) * CY_UDC_REQ_HEADER_SIZE))
+#define CY_UDC_DESC_BASE_ADDRESS	(CY_UDC_REQ_HEADER_ADDR(8))
+
+#define CY_UDC_BIOS_REPLACE_BASE	0x1800
+#define CY_UDC_REQ_BUFFER_BASE		0x2000
+#define CY_UDC_REQ_BUFFER_SIZE		0x0400
+#define CY_UDC_REQ_BUFFER_ADDR(ep_num)	(CY_UDC_REQ_BUFFER_BASE + \
+					 ((ep_num) * CY_UDC_REQ_BUFFER_SIZE))
+
+/* ---------------------------------------------------------------------
+ * Driver data structures
+ */
+
+struct c67x00_device;
+
+/**
+ * struct c67x00_sie - Common data associated with a SIE
+ * @lock: lock to protect this struct and the associated chip registers
+ * @private_data: subdriver dependent data
+ * @irq: subdriver dependent irq handler, set NULL when not used
+ * @dev: link to common driver structure
+ * @sie_num: SIE number on chip, starting from 0
+ * @mode: SIE mode (host/peripheral/otg/not used)
+ */
+struct c67x00_sie {
+	/* Entries to be used by the subdrivers */
+	spinlock_t lock;	/* protect this structure */
+	void *private_data;
+	void (*irq) (struct c67x00_sie *sie, u16 int_status, u16 msg);
+
+	/* Read only: */
+	struct c67x00_device *dev;
+	int sie_num;
+	int mode;
+};
+
+#define sie_dev(s)	(&(s)->dev->pdev->dev)
+
+/**
+ * struct c67x00_lcp
+ */
+struct c67x00_lcp {
+	/* Internal use only */
+	struct mutex mutex;
+	struct completion msg_received;
+	u16 last_msg;
+};
+
+/*
+ * struct c67x00_hpi
+ */
+struct c67x00_hpi {
+	void __iomem *base;
+	int regstep;
+	spinlock_t lock;
+	struct c67x00_lcp lcp;
+};
+
+#define C67X00_SIES	2
+#define C67X00_PORTS	2
+
+/**
+ * struct c67x00_device - Common data associated with a c67x00 instance
+ * @hpi: hpi addresses
+ * @sie: array of sie's on this chip
+ * @pdev: platform device of instance
+ * @pdata: configuration provided by the platform
+ */
+struct c67x00_device {
+	struct c67x00_hpi hpi;
+	struct c67x00_sie sie[C67X00_SIES];
+	struct platform_device *pdev;
+	struct c67x00_platform_data *pdata;
+};
+
+/* ---------------------------------------------------------------------
+ * Low level interface functions
+ */
+
+/* Host Port Interface (HPI) functions */
+u16 c67x00_ll_hpi_status(struct c67x00_device *dev);
+void c67x00_ll_hpi_reg_init(struct c67x00_device *dev);
+void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie);
+void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie);
+
+/* General functions */
+u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num);
+u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie);
+void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits);
+u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie);
+void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
+			      void *data, int len);
+void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
+			     void *data, int len);
+
+/* Host specific functions */
+void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value);
+void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port);
+void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr);
+u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie);
+u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie);
+void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie);
+void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port);
+
+/* Called by c67x00_irq to handle lcp interrupts */
+void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status);
+
+/* Setup and teardown */
+void c67x00_ll_init(struct c67x00_device *dev);
+void c67x00_ll_release(struct c67x00_device *dev);
+int c67x00_ll_reset(struct c67x00_device *dev);
+
+#endif				/* _USB_C67X00_H */
diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
new file mode 100644
index 000000000..b98ca0a13
--- /dev/null
+++ b/drivers/usb/cdns3/Kconfig
@@ -0,0 +1,122 @@
+config USB_CDNS_SUPPORT
+	tristate "Cadence USB Support"
+	depends on USB_SUPPORT && (USB || USB_GADGET) && HAS_DMA
+	select USB_XHCI_PLATFORM if USB_XHCI_HCD
+	select USB_ROLE_SWITCH
+	help
+	  Say Y here if your system has a Cadence USBSS or USBSSP
+	  dual-role controller.
+	  It supports: dual-role switch, Host-only, and Peripheral-only.
+
+config USB_CDNS_HOST
+	bool
+
+if USB_CDNS_SUPPORT
+
+config USB_CDNS3
+	tristate "Cadence USB3 Dual-Role Controller"
+	depends on USB_CDNS_SUPPORT
+	help
+	  Say Y here if your system has a Cadence USB3 dual-role controller.
+	  It supports: dual-role switch, Host-only, and Peripheral-only.
+
+	  If you choose to build this driver is a dynamically linked
+	  as module, the module will be called cdns3.ko.
+endif
+
+if USB_CDNS3
+
+config USB_CDNS3_GADGET
+	bool "Cadence USB3 device controller"
+	depends on USB_GADGET=y || USB_GADGET=USB_CDNS3
+	help
+	  Say Y here to enable device controller functionality of the
+	  Cadence USBSS-DEV driver.
+
+	  This controller supports FF, HS and SS mode. It doesn't support
+	  LS and SSP mode.
+
+config USB_CDNS3_HOST
+	bool "Cadence USB3 host controller"
+	depends on USB=y || USB=USB_CDNS3
+	select USB_CDNS_HOST
+	help
+	  Say Y here to enable host controller functionality of the
+	  Cadence driver.
+
+	  Host controller is compliant with XHCI so it will use
+	  standard XHCI driver.
+
+config USB_CDNS3_PCI_WRAP
+	tristate "Cadence USB3 support on PCIe-based platforms"
+	depends on USB_PCI && ACPI
+	default USB_CDNS3
+	help
+	  If you're using the USBSS Core IP with a PCIe, please say
+	  'Y' or 'M' here.
+
+	  If you choose to build this driver as module it will
+	  be dynamically linked and module will be called cdns3-pci.ko
+
+config USB_CDNS3_TI
+	tristate "Cadence USB3 support on TI platforms"
+	depends on ARCH_K3 || COMPILE_TEST
+	default USB_CDNS3
+	help
+	  Say 'Y' or 'M' here if you are building for Texas Instruments
+	  platforms that contain Cadence USB3 controller core.
+
+	  e.g. J721e.
+
+config USB_CDNS3_IMX
+	tristate "Cadence USB3 support on NXP i.MX platforms"
+	depends on ARCH_MXC || COMPILE_TEST
+	default USB_CDNS3
+	help
+	  Say 'Y' or 'M' here if you are building for NXP i.MX
+	  platforms that contain Cadence USB3 controller core.
+
+	  For example, imx8qm and imx8qxp.
+
+endif
+
+if USB_CDNS_SUPPORT
+
+config USB_CDNSP_PCI
+	tristate "Cadence CDNSP Dual-Role Controller"
+	depends on USB_CDNS_SUPPORT && USB_PCI && ACPI
+	help
+	  Say Y here if your system has a Cadence CDNSP dual-role controller.
+	  It supports: dual-role switch Host-only, and Peripheral-only.
+
+	  If you choose to build this driver is a dynamically linked
+	  module, the module will be called cdnsp.ko.
+endif
+
+if USB_CDNSP_PCI
+
+config USB_CDNSP_GADGET
+	bool "Cadence CDNSP device controller"
+	depends on USB_GADGET=y || USB_GADGET=USB_CDNSP_PCI
+	help
+	  Say Y here to enable device controller functionality of the
+	  Cadence CDNSP-DEV driver.
+
+	  Cadence CDNSP Device Controller in device mode is
+	  very similar to XHCI controller. Therefore some algorithms
+	  used has been taken from host driver.
+	  This controller supports FF, HS, SS and SSP mode.
+	  It doesn't support LS.
+
+config USB_CDNSP_HOST
+	bool "Cadence CDNSP host controller"
+	depends on USB=y || USB=USB_CDNSP_PCI
+	select USB_CDNS_HOST
+	help
+	  Say Y here to enable host controller functionality of the
+	  Cadence driver.
+
+	  Host controller is compliant with XHCI so it uses
+	  standard XHCI driver.
+
+endif
diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
new file mode 100644
index 000000000..61edb2f89
--- /dev/null
+++ b/drivers/usb/cdns3/Makefile
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+# define_trace.h needs to know how to find our header
+CFLAGS_cdns3-trace.o				:= -I$(src)
+CFLAGS_cdnsp-trace.o				:= -I$(src)
+
+cdns-usb-common-y				:= core.o drd.o
+cdns3-y						:= cdns3-plat.o
+
+ifeq ($(CONFIG_USB),m)
+obj-m						+= cdns-usb-common.o
+obj-m						+= cdns3.o
+else
+obj-$(CONFIG_USB_CDNS_SUPPORT)			+= cdns-usb-common.o
+obj-$(CONFIG_USB_CDNS3)				+= cdns3.o
+endif
+
+cdns-usb-common-$(CONFIG_USB_CDNS_HOST) 	+= host.o
+cdns3-$(CONFIG_USB_CDNS3_GADGET)		+= cdns3-gadget.o cdns3-ep0.o
+
+ifneq ($(CONFIG_USB_CDNS3_GADGET),)
+cdns3-$(CONFIG_TRACING)				+= cdns3-trace.o
+endif
+
+obj-$(CONFIG_USB_CDNS3_PCI_WRAP)		+= cdns3-pci-wrap.o
+obj-$(CONFIG_USB_CDNS3_TI)			+= cdns3-ti.o
+obj-$(CONFIG_USB_CDNS3_IMX)			+= cdns3-imx.o
+
+cdnsp-udc-pci-y					:= cdnsp-pci.o
+
+ifdef CONFIG_USB_CDNSP_PCI
+ifeq ($(CONFIG_USB),m)
+obj-m						+= cdnsp-udc-pci.o
+else
+obj-$(CONFIG_USB_CDNSP_PCI) 			+= cdnsp-udc-pci.o
+endif
+endif
+
+cdnsp-udc-pci-$(CONFIG_USB_CDNSP_GADGET)	+= cdnsp-ring.o cdnsp-gadget.o \
+						   cdnsp-mem.o cdnsp-ep0.o
+
+ifneq ($(CONFIG_USB_CDNSP_GADGET),)
+cdnsp-udc-pci-$(CONFIG_TRACING)			+= cdnsp-trace.o
+endif
diff --git a/drivers/usb/cdns3/cdns3-debug.h b/drivers/usb/cdns3/cdns3-debug.h
new file mode 100644
index 000000000..a5c6a29e1
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-debug.h
@@ -0,0 +1,161 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence USBSS DRD Driver.
+ * Debug header file.
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+#ifndef __LINUX_CDNS3_DEBUG
+#define __LINUX_CDNS3_DEBUG
+
+#include "core.h"
+
+static inline char *cdns3_decode_usb_irq(char *str,
+					 enum usb_device_speed speed,
+					 u32 usb_ists)
+{
+	int ret;
+
+	ret = sprintf(str, "IRQ %08x = ", usb_ists);
+
+	if (usb_ists & (USB_ISTS_CON2I | USB_ISTS_CONI)) {
+		ret += sprintf(str + ret, "Connection %s\n",
+			       usb_speed_string(speed));
+	}
+	if (usb_ists & USB_ISTS_DIS2I || usb_ists & USB_ISTS_DISI)
+		ret += sprintf(str + ret, "Disconnection ");
+	if (usb_ists & USB_ISTS_L2ENTI)
+		ret += sprintf(str + ret, "suspended ");
+	if (usb_ists & USB_ISTS_L1ENTI)
+		ret += sprintf(str + ret, "L1 enter ");
+	if (usb_ists & USB_ISTS_L1EXTI)
+		ret += sprintf(str + ret, "L1 exit ");
+	if (usb_ists & USB_ISTS_L2ENTI)
+		ret += sprintf(str + ret, "L2 enter ");
+	if (usb_ists & USB_ISTS_L2EXTI)
+		ret += sprintf(str + ret, "L2 exit ");
+	if (usb_ists & USB_ISTS_U3EXTI)
+		ret += sprintf(str + ret, "U3 exit ");
+	if (usb_ists & USB_ISTS_UWRESI)
+		ret += sprintf(str + ret, "Warm Reset ");
+	if (usb_ists & USB_ISTS_UHRESI)
+		ret += sprintf(str + ret, "Hot Reset ");
+	if (usb_ists & USB_ISTS_U2RESI)
+		ret += sprintf(str + ret, "Reset");
+
+	return str;
+}
+
+static inline  char *cdns3_decode_ep_irq(char *str,
+					 u32 ep_sts,
+					 const char *ep_name)
+{
+	int ret;
+
+	ret = sprintf(str, "IRQ for %s: %08x ", ep_name, ep_sts);
+
+	if (ep_sts & EP_STS_SETUP)
+		ret += sprintf(str + ret, "SETUP ");
+	if (ep_sts & EP_STS_IOC)
+		ret += sprintf(str + ret, "IOC ");
+	if (ep_sts & EP_STS_ISP)
+		ret += sprintf(str + ret, "ISP ");
+	if (ep_sts & EP_STS_DESCMIS)
+		ret += sprintf(str + ret, "DESCMIS ");
+	if (ep_sts & EP_STS_STREAMR)
+		ret += sprintf(str + ret, "STREAMR ");
+	if (ep_sts & EP_STS_MD_EXIT)
+		ret += sprintf(str + ret, "MD_EXIT ");
+	if (ep_sts & EP_STS_TRBERR)
+		ret += sprintf(str + ret, "TRBERR ");
+	if (ep_sts & EP_STS_NRDY)
+		ret += sprintf(str + ret, "NRDY ");
+	if (ep_sts & EP_STS_PRIME)
+		ret += sprintf(str + ret, "PRIME ");
+	if (ep_sts & EP_STS_SIDERR)
+		ret += sprintf(str + ret, "SIDERRT ");
+	if (ep_sts & EP_STS_OUTSMM)
+		ret += sprintf(str + ret, "OUTSMM ");
+	if (ep_sts & EP_STS_ISOERR)
+		ret += sprintf(str + ret, "ISOERR ");
+	if (ep_sts & EP_STS_IOT)
+		ret += sprintf(str + ret, "IOT ");
+
+	return str;
+}
+
+static inline char *cdns3_decode_epx_irq(char *str,
+					 char *ep_name,
+					 u32 ep_sts)
+{
+	return cdns3_decode_ep_irq(str, ep_sts, ep_name);
+}
+
+static inline char *cdns3_decode_ep0_irq(char *str,
+					 int dir,
+					 u32 ep_sts)
+{
+	return cdns3_decode_ep_irq(str, ep_sts,
+				   dir ? "ep0IN" : "ep0OUT");
+}
+
+/**
+ * Debug a transfer ring.
+ *
+ * Prints out all TRBs in the endpoint ring, even those after the Link TRB.
+ *.
+ */
+static inline char *cdns3_dbg_ring(struct cdns3_endpoint *priv_ep,
+				   struct cdns3_trb *ring, char *str)
+{
+	dma_addr_t addr = priv_ep->trb_pool_dma;
+	struct cdns3_trb *trb;
+	int trb_per_sector;
+	int ret = 0;
+	int i;
+
+	trb_per_sector = GET_TRBS_PER_SEGMENT(priv_ep->type);
+
+	trb = &priv_ep->trb_pool[priv_ep->dequeue];
+	ret += sprintf(str + ret, "\n\t\tRing contents for %s:", priv_ep->name);
+
+	ret += sprintf(str + ret,
+		       "\n\t\tRing deq index: %d, trb: %p (virt), 0x%llx (dma)\n",
+		       priv_ep->dequeue, trb,
+		       (unsigned long long)cdns3_trb_virt_to_dma(priv_ep, trb));
+
+	trb = &priv_ep->trb_pool[priv_ep->enqueue];
+	ret += sprintf(str + ret,
+		       "\t\tRing enq index: %d, trb: %p (virt), 0x%llx (dma)\n",
+		       priv_ep->enqueue, trb,
+		       (unsigned long long)cdns3_trb_virt_to_dma(priv_ep, trb));
+
+	ret += sprintf(str + ret,
+		       "\t\tfree trbs: %d, CCS=%d, PCS=%d\n",
+		       priv_ep->free_trbs, priv_ep->ccs, priv_ep->pcs);
+
+	if (trb_per_sector > TRBS_PER_SEGMENT)
+		trb_per_sector = TRBS_PER_SEGMENT;
+
+	if (trb_per_sector > TRBS_PER_SEGMENT) {
+		sprintf(str + ret, "\t\tTransfer ring %d too big\n",
+			trb_per_sector);
+		return str;
+	}
+
+	for (i = 0; i < trb_per_sector; ++i) {
+		trb = &ring[i];
+		ret += sprintf(str + ret,
+			"\t\t@%pad %08x %08x %08x\n", &addr,
+			le32_to_cpu(trb->buffer),
+			le32_to_cpu(trb->length),
+			le32_to_cpu(trb->control));
+		addr += sizeof(*trb);
+	}
+
+	return str;
+}
+
+#endif /*__LINUX_CDNS3_DEBUG*/
diff --git a/drivers/usb/cdns3/cdns3-ep0.c b/drivers/usb/cdns3/cdns3-ep0.c
new file mode 100644
index 000000000..e29989d57
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-ep0.c
@@ -0,0 +1,895 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS DRD Driver - gadget side.
+ *
+ * Copyright (C) 2018 Cadence Design Systems.
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Pawel Jez <pjez@cadence.com>,
+ *          Pawel Laszczak <pawell@cadence.com>
+ *          Peter Chen <peter.chen@nxp.com>
+ */
+
+#include <linux/usb/composite.h>
+#include <linux/iopoll.h>
+
+#include "cdns3-gadget.h"
+#include "cdns3-trace.h"
+
+static struct usb_endpoint_descriptor cdns3_gadget_ep0_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+	.bmAttributes =	USB_ENDPOINT_XFER_CONTROL,
+};
+
+/**
+ * cdns3_ep0_run_transfer - Do transfer on default endpoint hardware
+ * @priv_dev: extended gadget object
+ * @dma_addr: physical address where data is/will be stored
+ * @length: data length
+ * @erdy: set it to 1 when ERDY packet should be sent -
+ *        exit from flow control state
+ * @zlp: add zero length packet
+ */
+static void cdns3_ep0_run_transfer(struct cdns3_device *priv_dev,
+				   dma_addr_t dma_addr,
+				   unsigned int length, int erdy, int zlp)
+{
+	struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
+	struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
+
+	priv_ep->trb_pool[0].buffer = cpu_to_le32(TRB_BUFFER(dma_addr));
+	priv_ep->trb_pool[0].length = cpu_to_le32(TRB_LEN(length));
+
+	if (zlp) {
+		priv_ep->trb_pool[0].control = cpu_to_le32(TRB_CYCLE | TRB_TYPE(TRB_NORMAL));
+		priv_ep->trb_pool[1].buffer = cpu_to_le32(TRB_BUFFER(dma_addr));
+		priv_ep->trb_pool[1].length = cpu_to_le32(TRB_LEN(0));
+		priv_ep->trb_pool[1].control = cpu_to_le32(TRB_CYCLE | TRB_IOC |
+		    TRB_TYPE(TRB_NORMAL));
+	} else {
+		priv_ep->trb_pool[0].control = cpu_to_le32(TRB_CYCLE | TRB_IOC |
+		    TRB_TYPE(TRB_NORMAL));
+		priv_ep->trb_pool[1].control = 0;
+	}
+
+	trace_cdns3_prepare_trb(priv_ep, priv_ep->trb_pool);
+
+	cdns3_select_ep(priv_dev, priv_dev->ep0_data_dir);
+
+	writel(EP_STS_TRBERR, &regs->ep_sts);
+	writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma), &regs->ep_traddr);
+	trace_cdns3_doorbell_ep0(priv_dev->ep0_data_dir ? "ep0in" : "ep0out",
+				 readl(&regs->ep_traddr));
+
+	/* TRB should be prepared before starting transfer. */
+	writel(EP_CMD_DRDY, &regs->ep_cmd);
+
+	/* Resume controller before arming transfer. */
+	__cdns3_gadget_wakeup(priv_dev);
+
+	if (erdy)
+		writel(EP_CMD_ERDY, &priv_dev->regs->ep_cmd);
+}
+
+/**
+ * cdns3_ep0_delegate_req - Returns status of handling setup packet
+ * Setup is handled by gadget driver
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns zero on success or negative value on failure
+ */
+static int cdns3_ep0_delegate_req(struct cdns3_device *priv_dev,
+				  struct usb_ctrlrequest *ctrl_req)
+{
+	int ret;
+
+	spin_unlock(&priv_dev->lock);
+	priv_dev->setup_pending = 1;
+	ret = priv_dev->gadget_driver->setup(&priv_dev->gadget, ctrl_req);
+	priv_dev->setup_pending = 0;
+	spin_lock(&priv_dev->lock);
+	return ret;
+}
+
+static void cdns3_prepare_setup_packet(struct cdns3_device *priv_dev)
+{
+	priv_dev->ep0_data_dir = 0;
+	priv_dev->ep0_stage = CDNS3_SETUP_STAGE;
+	cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma,
+			       sizeof(struct usb_ctrlrequest), 0, 0);
+}
+
+static void cdns3_ep0_complete_setup(struct cdns3_device *priv_dev,
+				     u8 send_stall, u8 send_erdy)
+{
+	struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
+	struct usb_request *request;
+
+	request = cdns3_next_request(&priv_ep->pending_req_list);
+	if (request)
+		list_del_init(&request->list);
+
+	if (send_stall) {
+		trace_cdns3_halt(priv_ep, send_stall, 0);
+		/* set_stall on ep0 */
+		cdns3_select_ep(priv_dev, 0x00);
+		writel(EP_CMD_SSTALL, &priv_dev->regs->ep_cmd);
+	} else {
+		cdns3_prepare_setup_packet(priv_dev);
+	}
+
+	priv_dev->ep0_stage = CDNS3_SETUP_STAGE;
+	writel((send_erdy ? EP_CMD_ERDY : 0) | EP_CMD_REQ_CMPL,
+	       &priv_dev->regs->ep_cmd);
+}
+
+/**
+ * cdns3_req_ep0_set_configuration - Handling of SET_CONFIG standard USB request
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns 0 if success, USB_GADGET_DELAYED_STATUS on deferred status stage,
+ * error code on error
+ */
+static int cdns3_req_ep0_set_configuration(struct cdns3_device *priv_dev,
+					   struct usb_ctrlrequest *ctrl_req)
+{
+	enum usb_device_state device_state = priv_dev->gadget.state;
+	u32 config = le16_to_cpu(ctrl_req->wValue);
+	int result = 0;
+
+	switch (device_state) {
+	case USB_STATE_ADDRESS:
+		result = cdns3_ep0_delegate_req(priv_dev, ctrl_req);
+
+		if (result || !config)
+			goto reset_config;
+
+		break;
+	case USB_STATE_CONFIGURED:
+		result = cdns3_ep0_delegate_req(priv_dev, ctrl_req);
+		if (!config && !result)
+			goto reset_config;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+
+reset_config:
+	if (result != USB_GADGET_DELAYED_STATUS)
+		cdns3_hw_reset_eps_config(priv_dev);
+
+	usb_gadget_set_state(&priv_dev->gadget,
+			     USB_STATE_ADDRESS);
+
+	return result;
+}
+
+/**
+ * cdns3_req_ep0_set_address - Handling of SET_ADDRESS standard USB request
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_req_ep0_set_address(struct cdns3_device *priv_dev,
+				     struct usb_ctrlrequest *ctrl_req)
+{
+	enum usb_device_state device_state = priv_dev->gadget.state;
+	u32 reg;
+	u32 addr;
+
+	addr = le16_to_cpu(ctrl_req->wValue);
+
+	if (addr > USB_DEVICE_MAX_ADDRESS) {
+		dev_err(priv_dev->dev,
+			"Device address (%d) cannot be greater than %d\n",
+			addr, USB_DEVICE_MAX_ADDRESS);
+		return -EINVAL;
+	}
+
+	if (device_state == USB_STATE_CONFIGURED) {
+		dev_err(priv_dev->dev,
+			"can't set_address from configured state\n");
+		return -EINVAL;
+	}
+
+	reg = readl(&priv_dev->regs->usb_cmd);
+
+	writel(reg | USB_CMD_FADDR(addr) | USB_CMD_SET_ADDR,
+	       &priv_dev->regs->usb_cmd);
+
+	usb_gadget_set_state(&priv_dev->gadget,
+			     (addr ? USB_STATE_ADDRESS : USB_STATE_DEFAULT));
+
+	return 0;
+}
+
+/**
+ * cdns3_req_ep0_get_status - Handling of GET_STATUS standard USB request
+ * @priv_dev: extended gadget object
+ * @ctrl: pointer to received setup packet
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_req_ep0_get_status(struct cdns3_device *priv_dev,
+				    struct usb_ctrlrequest *ctrl)
+{
+	struct cdns3_endpoint *priv_ep;
+	__le16 *response_pkt;
+	u16 usb_status = 0;
+	u32 recip;
+	u8 index;
+
+	recip = ctrl->bRequestType & USB_RECIP_MASK;
+
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		/* self powered */
+		if (priv_dev->is_selfpowered)
+			usb_status = BIT(USB_DEVICE_SELF_POWERED);
+
+		if (priv_dev->wake_up_flag)
+			usb_status |= BIT(USB_DEVICE_REMOTE_WAKEUP);
+
+		if (priv_dev->gadget.speed != USB_SPEED_SUPER)
+			break;
+
+		if (priv_dev->u1_allowed)
+			usb_status |= BIT(USB_DEV_STAT_U1_ENABLED);
+
+		if (priv_dev->u2_allowed)
+			usb_status |= BIT(USB_DEV_STAT_U2_ENABLED);
+
+		break;
+	case USB_RECIP_INTERFACE:
+		return cdns3_ep0_delegate_req(priv_dev, ctrl);
+	case USB_RECIP_ENDPOINT:
+		index = cdns3_ep_addr_to_index(le16_to_cpu(ctrl->wIndex));
+		priv_ep = priv_dev->eps[index];
+
+		/* check if endpoint is stalled or stall is pending */
+		cdns3_select_ep(priv_dev, le16_to_cpu(ctrl->wIndex));
+		if (EP_STS_STALL(readl(&priv_dev->regs->ep_sts)) ||
+		    (priv_ep->flags & EP_STALL_PENDING))
+			usb_status =  BIT(USB_ENDPOINT_HALT);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	response_pkt = (__le16 *)priv_dev->setup_buf;
+	*response_pkt = cpu_to_le16(usb_status);
+
+	cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma,
+			       sizeof(*response_pkt), 1, 0);
+	return 0;
+}
+
+static int cdns3_ep0_feature_handle_device(struct cdns3_device *priv_dev,
+					   struct usb_ctrlrequest *ctrl,
+					   int set)
+{
+	enum usb_device_state state;
+	enum usb_device_speed speed;
+	int ret = 0;
+	u32 wValue;
+	u16 tmode;
+
+	wValue = le16_to_cpu(ctrl->wValue);
+	state = priv_dev->gadget.state;
+	speed = priv_dev->gadget.speed;
+
+	switch (wValue) {
+	case USB_DEVICE_REMOTE_WAKEUP:
+		priv_dev->wake_up_flag = !!set;
+		break;
+	case USB_DEVICE_U1_ENABLE:
+		if (state != USB_STATE_CONFIGURED || speed != USB_SPEED_SUPER)
+			return -EINVAL;
+
+		priv_dev->u1_allowed = !!set;
+		break;
+	case USB_DEVICE_U2_ENABLE:
+		if (state != USB_STATE_CONFIGURED || speed != USB_SPEED_SUPER)
+			return -EINVAL;
+
+		priv_dev->u2_allowed = !!set;
+		break;
+	case USB_DEVICE_LTM_ENABLE:
+		ret = -EINVAL;
+		break;
+	case USB_DEVICE_TEST_MODE:
+		if (state != USB_STATE_CONFIGURED || speed > USB_SPEED_HIGH)
+			return -EINVAL;
+
+		tmode = le16_to_cpu(ctrl->wIndex);
+
+		if (!set || (tmode & 0xff) != 0)
+			return -EINVAL;
+
+		tmode >>= 8;
+		switch (tmode) {
+		case USB_TEST_J:
+		case USB_TEST_K:
+		case USB_TEST_SE0_NAK:
+		case USB_TEST_PACKET:
+			cdns3_set_register_bit(&priv_dev->regs->usb_cmd,
+					       USB_CMD_STMODE |
+					       USB_STS_TMODE_SEL(tmode - 1));
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int cdns3_ep0_feature_handle_intf(struct cdns3_device *priv_dev,
+					 struct usb_ctrlrequest *ctrl,
+					 int set)
+{
+	u32 wValue;
+	int ret = 0;
+
+	wValue = le16_to_cpu(ctrl->wValue);
+
+	switch (wValue) {
+	case USB_INTRF_FUNC_SUSPEND:
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int cdns3_ep0_feature_handle_endpoint(struct cdns3_device *priv_dev,
+					     struct usb_ctrlrequest *ctrl,
+					     int set)
+{
+	struct cdns3_endpoint *priv_ep;
+	int ret = 0;
+	u8 index;
+
+	if (le16_to_cpu(ctrl->wValue) != USB_ENDPOINT_HALT)
+		return -EINVAL;
+
+	if (!(le16_to_cpu(ctrl->wIndex) & ~USB_DIR_IN))
+		return 0;
+
+	index = cdns3_ep_addr_to_index(le16_to_cpu(ctrl->wIndex));
+	priv_ep = priv_dev->eps[index];
+
+	cdns3_select_ep(priv_dev, le16_to_cpu(ctrl->wIndex));
+
+	if (set)
+		__cdns3_gadget_ep_set_halt(priv_ep);
+	else if (!(priv_ep->flags & EP_WEDGE))
+		ret = __cdns3_gadget_ep_clear_halt(priv_ep);
+
+	cdns3_select_ep(priv_dev, 0x00);
+
+	return ret;
+}
+
+/**
+ * cdns3_req_ep0_handle_feature -
+ * Handling of GET/SET_FEATURE standard USB request
+ *
+ * @priv_dev: extended gadget object
+ * @ctrl: pointer to received setup packet
+ * @set: must be set to 1 for SET_FEATURE request
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_req_ep0_handle_feature(struct cdns3_device *priv_dev,
+					struct usb_ctrlrequest *ctrl,
+					int set)
+{
+	int ret = 0;
+	u32 recip;
+
+	recip = ctrl->bRequestType & USB_RECIP_MASK;
+
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		ret = cdns3_ep0_feature_handle_device(priv_dev, ctrl, set);
+		break;
+	case USB_RECIP_INTERFACE:
+		ret = cdns3_ep0_feature_handle_intf(priv_dev, ctrl, set);
+		break;
+	case USB_RECIP_ENDPOINT:
+		ret = cdns3_ep0_feature_handle_endpoint(priv_dev, ctrl, set);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+/**
+ * cdns3_req_ep0_set_sel - Handling of SET_SEL standard USB request
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_req_ep0_set_sel(struct cdns3_device *priv_dev,
+				 struct usb_ctrlrequest *ctrl_req)
+{
+	if (priv_dev->gadget.state < USB_STATE_ADDRESS)
+		return -EINVAL;
+
+	if (le16_to_cpu(ctrl_req->wLength) != 6) {
+		dev_err(priv_dev->dev, "Set SEL should be 6 bytes, got %d\n",
+			ctrl_req->wLength);
+		return -EINVAL;
+	}
+
+	cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma, 6, 1, 0);
+	return 0;
+}
+
+/**
+ * cdns3_req_ep0_set_isoch_delay -
+ * Handling of GET_ISOCH_DELAY standard USB request
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_req_ep0_set_isoch_delay(struct cdns3_device *priv_dev,
+					 struct usb_ctrlrequest *ctrl_req)
+{
+	if (ctrl_req->wIndex || ctrl_req->wLength)
+		return -EINVAL;
+
+	priv_dev->isoch_delay = le16_to_cpu(ctrl_req->wValue);
+
+	return 0;
+}
+
+/**
+ * cdns3_ep0_standard_request - Handling standard USB requests
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_ep0_standard_request(struct cdns3_device *priv_dev,
+				      struct usb_ctrlrequest *ctrl_req)
+{
+	int ret;
+
+	switch (ctrl_req->bRequest) {
+	case USB_REQ_SET_ADDRESS:
+		ret = cdns3_req_ep0_set_address(priv_dev, ctrl_req);
+		break;
+	case USB_REQ_SET_CONFIGURATION:
+		ret = cdns3_req_ep0_set_configuration(priv_dev, ctrl_req);
+		break;
+	case USB_REQ_GET_STATUS:
+		ret = cdns3_req_ep0_get_status(priv_dev, ctrl_req);
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+		ret = cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 0);
+		break;
+	case USB_REQ_SET_FEATURE:
+		ret = cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 1);
+		break;
+	case USB_REQ_SET_SEL:
+		ret = cdns3_req_ep0_set_sel(priv_dev, ctrl_req);
+		break;
+	case USB_REQ_SET_ISOCH_DELAY:
+		ret = cdns3_req_ep0_set_isoch_delay(priv_dev, ctrl_req);
+		break;
+	default:
+		ret = cdns3_ep0_delegate_req(priv_dev, ctrl_req);
+		break;
+	}
+
+	return ret;
+}
+
+static void __pending_setup_status_handler(struct cdns3_device *priv_dev)
+{
+	struct usb_request *request = priv_dev->pending_status_request;
+
+	if (priv_dev->status_completion_no_call && request &&
+	    request->complete) {
+		request->complete(&priv_dev->eps[0]->endpoint, request);
+		priv_dev->status_completion_no_call = 0;
+	}
+}
+
+void cdns3_pending_setup_status_handler(struct work_struct *work)
+{
+	struct cdns3_device *priv_dev = container_of(work, struct cdns3_device,
+			pending_status_wq);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+	__pending_setup_status_handler(priv_dev);
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+}
+
+/**
+ * cdns3_ep0_setup_phase - Handling setup USB requests
+ * @priv_dev: extended gadget object
+ */
+static void cdns3_ep0_setup_phase(struct cdns3_device *priv_dev)
+{
+	struct usb_ctrlrequest *ctrl = priv_dev->setup_buf;
+	struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
+	int result;
+
+	priv_dev->ep0_data_dir = ctrl->bRequestType & USB_DIR_IN;
+
+	trace_cdns3_ctrl_req(ctrl);
+
+	if (!list_empty(&priv_ep->pending_req_list)) {
+		struct usb_request *request;
+
+		request = cdns3_next_request(&priv_ep->pending_req_list);
+		priv_ep->dir = priv_dev->ep0_data_dir;
+		cdns3_gadget_giveback(priv_ep, to_cdns3_request(request),
+				      -ECONNRESET);
+	}
+
+	if (le16_to_cpu(ctrl->wLength))
+		priv_dev->ep0_stage = CDNS3_DATA_STAGE;
+	else
+		priv_dev->ep0_stage = CDNS3_STATUS_STAGE;
+
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+		result = cdns3_ep0_standard_request(priv_dev, ctrl);
+	else
+		result = cdns3_ep0_delegate_req(priv_dev, ctrl);
+
+	if (result == USB_GADGET_DELAYED_STATUS)
+		return;
+
+	if (result < 0)
+		cdns3_ep0_complete_setup(priv_dev, 1, 1);
+	else if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE)
+		cdns3_ep0_complete_setup(priv_dev, 0, 1);
+}
+
+static void cdns3_transfer_completed(struct cdns3_device *priv_dev)
+{
+	struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
+
+	if (!list_empty(&priv_ep->pending_req_list)) {
+		struct usb_request *request;
+
+		trace_cdns3_complete_trb(priv_ep, priv_ep->trb_pool);
+		request = cdns3_next_request(&priv_ep->pending_req_list);
+
+		request->actual =
+			TRB_LEN(le32_to_cpu(priv_ep->trb_pool->length));
+
+		priv_ep->dir = priv_dev->ep0_data_dir;
+		cdns3_gadget_giveback(priv_ep, to_cdns3_request(request), 0);
+	}
+
+	cdns3_ep0_complete_setup(priv_dev, 0, 0);
+}
+
+/**
+ * cdns3_check_new_setup - Check if controller receive new SETUP packet.
+ * @priv_dev: extended gadget object
+ *
+ * The SETUP packet can be kept in on-chip memory or in system memory.
+ */
+static bool cdns3_check_new_setup(struct cdns3_device *priv_dev)
+{
+	u32 ep_sts_reg;
+
+	cdns3_select_ep(priv_dev, USB_DIR_OUT);
+	ep_sts_reg = readl(&priv_dev->regs->ep_sts);
+
+	return !!(ep_sts_reg & (EP_STS_SETUP | EP_STS_STPWAIT));
+}
+
+/**
+ * cdns3_check_ep0_interrupt_proceed - Processes interrupt related to endpoint 0
+ * @priv_dev: extended gadget object
+ * @dir: USB_DIR_IN for IN direction, USB_DIR_OUT for OUT direction
+ */
+void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir)
+{
+	u32 ep_sts_reg;
+
+	cdns3_select_ep(priv_dev, dir);
+
+	ep_sts_reg = readl(&priv_dev->regs->ep_sts);
+	writel(ep_sts_reg, &priv_dev->regs->ep_sts);
+
+	trace_cdns3_ep0_irq(priv_dev, ep_sts_reg);
+
+	__pending_setup_status_handler(priv_dev);
+
+	if (ep_sts_reg & EP_STS_SETUP)
+		priv_dev->wait_for_setup = 1;
+
+	if (priv_dev->wait_for_setup && ep_sts_reg & EP_STS_IOC) {
+		priv_dev->wait_for_setup = 0;
+		cdns3_ep0_setup_phase(priv_dev);
+	} else if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) {
+		priv_dev->ep0_data_dir = dir;
+		cdns3_transfer_completed(priv_dev);
+	}
+
+	if (ep_sts_reg & EP_STS_DESCMIS) {
+		if (dir == 0 && !priv_dev->setup_pending)
+			cdns3_prepare_setup_packet(priv_dev);
+	}
+}
+
+/**
+ * cdns3_gadget_ep0_enable
+ * @ep: pointer to endpoint zero object
+ * @desc: pointer to usb endpoint descriptor
+ *
+ * Function shouldn't be called by gadget driver,
+ * endpoint 0 is allways active
+ */
+static int cdns3_gadget_ep0_enable(struct usb_ep *ep,
+				   const struct usb_endpoint_descriptor *desc)
+{
+	return -EINVAL;
+}
+
+/**
+ * cdns3_gadget_ep0_disable
+ * @ep: pointer to endpoint zero object
+ *
+ * Function shouldn't be called by gadget driver,
+ * endpoint 0 is allways active
+ */
+static int cdns3_gadget_ep0_disable(struct usb_ep *ep)
+{
+	return -EINVAL;
+}
+
+/**
+ * cdns3_gadget_ep0_set_halt
+ * @ep: pointer to endpoint zero object
+ * @value: 1 for set stall, 0 for clear stall
+ *
+ * Returns 0
+ */
+static int cdns3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
+{
+	/* TODO */
+	return 0;
+}
+
+/**
+ * cdns3_gadget_ep0_queue - Transfer data on endpoint zero
+ * @ep: pointer to endpoint zero object
+ * @request: pointer to request object
+ * @gfp_flags: gfp flags
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int cdns3_gadget_ep0_queue(struct usb_ep *ep,
+				  struct usb_request *request,
+				  gfp_t gfp_flags)
+{
+	struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	unsigned long flags;
+	int ret = 0;
+	u8 zlp = 0;
+	int i;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+	trace_cdns3_ep0_queue(priv_dev, request);
+
+	/* cancel the request if controller receive new SETUP packet. */
+	if (cdns3_check_new_setup(priv_dev)) {
+		spin_unlock_irqrestore(&priv_dev->lock, flags);
+		return -ECONNRESET;
+	}
+
+	/* send STATUS stage. Should be called only for SET_CONFIGURATION */
+	if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE) {
+		u32 val;
+
+		cdns3_select_ep(priv_dev, 0x00);
+
+		/*
+		 * Configure all non-control EPs which are not enabled by class driver
+		 */
+		for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) {
+			priv_ep = priv_dev->eps[i];
+			if (priv_ep && priv_ep->flags & EP_CLAIMED &&
+			    !(priv_ep->flags & EP_ENABLED))
+				cdns3_ep_config(priv_ep, 0);
+		}
+
+		cdns3_set_hw_configuration(priv_dev);
+		cdns3_ep0_complete_setup(priv_dev, 0, 1);
+		/* wait until configuration set */
+		ret = readl_poll_timeout_atomic(&priv_dev->regs->usb_sts, val,
+					  val & USB_STS_CFGSTS_MASK, 1, 100);
+		if (ret == -ETIMEDOUT)
+			dev_warn(priv_dev->dev, "timeout for waiting configuration set\n");
+
+		request->actual = 0;
+		priv_dev->status_completion_no_call = true;
+		priv_dev->pending_status_request = request;
+		usb_gadget_set_state(&priv_dev->gadget, USB_STATE_CONFIGURED);
+		spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+		/*
+		 * Since there is no completion interrupt for status stage,
+		 * it needs to call ->completion in software after
+		 * ep0_queue is back.
+		 */
+		queue_work(system_freezable_wq, &priv_dev->pending_status_wq);
+		return ret;
+	}
+
+	if (!list_empty(&priv_ep->pending_req_list)) {
+		dev_err(priv_dev->dev,
+			"can't handle multiple requests for ep0\n");
+		spin_unlock_irqrestore(&priv_dev->lock, flags);
+		return -EBUSY;
+	}
+
+	ret = usb_gadget_map_request_by_dev(priv_dev->sysdev, request,
+					    priv_dev->ep0_data_dir);
+	if (ret) {
+		spin_unlock_irqrestore(&priv_dev->lock, flags);
+		dev_err(priv_dev->dev, "failed to map request\n");
+		return -EINVAL;
+	}
+
+	request->status = -EINPROGRESS;
+	list_add_tail(&request->list, &priv_ep->pending_req_list);
+
+	if (request->zero && request->length &&
+	    (request->length % ep->maxpacket == 0))
+		zlp = 1;
+
+	cdns3_ep0_run_transfer(priv_dev, request->dma, request->length, 1, zlp);
+
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+	return ret;
+}
+
+/**
+ * cdns3_gadget_ep_set_wedge - Set wedge on selected endpoint
+ * @ep: endpoint object
+ *
+ * Returns 0
+ */
+int cdns3_gadget_ep_set_wedge(struct usb_ep *ep)
+{
+	struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+	dev_dbg(priv_dev->dev, "Wedge for %s\n", ep->name);
+	cdns3_gadget_ep_set_halt(ep, 1);
+	priv_ep->flags |= EP_WEDGE;
+
+	return 0;
+}
+
+static const struct usb_ep_ops cdns3_gadget_ep0_ops = {
+	.enable = cdns3_gadget_ep0_enable,
+	.disable = cdns3_gadget_ep0_disable,
+	.alloc_request = cdns3_gadget_ep_alloc_request,
+	.free_request = cdns3_gadget_ep_free_request,
+	.queue = cdns3_gadget_ep0_queue,
+	.dequeue = cdns3_gadget_ep_dequeue,
+	.set_halt = cdns3_gadget_ep0_set_halt,
+	.set_wedge = cdns3_gadget_ep_set_wedge,
+};
+
+/**
+ * cdns3_ep0_config - Configures default endpoint
+ * @priv_dev: extended gadget object
+ *
+ * Functions sets parameters: maximal packet size and enables interrupts
+ */
+void cdns3_ep0_config(struct cdns3_device *priv_dev)
+{
+	struct cdns3_usb_regs __iomem *regs;
+	struct cdns3_endpoint *priv_ep;
+	u32 max_packet_size = 64;
+	u32 ep_cfg;
+
+	regs = priv_dev->regs;
+
+	if (priv_dev->gadget.speed == USB_SPEED_SUPER)
+		max_packet_size = 512;
+
+	priv_ep = priv_dev->eps[0];
+
+	if (!list_empty(&priv_ep->pending_req_list)) {
+		struct usb_request *request;
+
+		request = cdns3_next_request(&priv_ep->pending_req_list);
+		list_del_init(&request->list);
+	}
+
+	priv_dev->u1_allowed = 0;
+	priv_dev->u2_allowed = 0;
+
+	priv_dev->gadget.ep0->maxpacket = max_packet_size;
+	cdns3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(max_packet_size);
+
+	/* init ep out */
+	cdns3_select_ep(priv_dev, USB_DIR_OUT);
+
+	if (priv_dev->dev_ver >= DEV_VER_V3) {
+		cdns3_set_register_bit(&priv_dev->regs->dtrans,
+				       BIT(0) | BIT(16));
+		cdns3_set_register_bit(&priv_dev->regs->tdl_from_trb,
+				       BIT(0) | BIT(16));
+	}
+
+	ep_cfg = EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size);
+
+	if (!(priv_ep->flags & EP_CONFIGURED))
+		writel(ep_cfg, &regs->ep_cfg);
+
+	writel(EP_STS_EN_SETUPEN | EP_STS_EN_DESCMISEN | EP_STS_EN_TRBERREN,
+	       &regs->ep_sts_en);
+
+	/* init ep in */
+	cdns3_select_ep(priv_dev, USB_DIR_IN);
+
+	if (!(priv_ep->flags & EP_CONFIGURED))
+		writel(ep_cfg, &regs->ep_cfg);
+
+	priv_ep->flags |= EP_CONFIGURED;
+
+	writel(EP_STS_EN_SETUPEN | EP_STS_EN_TRBERREN, &regs->ep_sts_en);
+
+	cdns3_set_register_bit(&regs->usb_conf, USB_CONF_U1DS | USB_CONF_U2DS);
+}
+
+/**
+ * cdns3_init_ep0 - Initializes software endpoint 0 of gadget
+ * @priv_dev: extended gadget object
+ * @priv_ep: extended endpoint object
+ *
+ * Returns 0 on success else error code.
+ */
+int cdns3_init_ep0(struct cdns3_device *priv_dev,
+		   struct cdns3_endpoint *priv_ep)
+{
+	sprintf(priv_ep->name, "ep0");
+
+	/* fill linux fields */
+	priv_ep->endpoint.ops = &cdns3_gadget_ep0_ops;
+	priv_ep->endpoint.maxburst = 1;
+	usb_ep_set_maxpacket_limit(&priv_ep->endpoint,
+				   CDNS3_EP0_MAX_PACKET_LIMIT);
+	priv_ep->endpoint.address = 0;
+	priv_ep->endpoint.caps.type_control = 1;
+	priv_ep->endpoint.caps.dir_in = 1;
+	priv_ep->endpoint.caps.dir_out = 1;
+	priv_ep->endpoint.name = priv_ep->name;
+	priv_ep->endpoint.desc = &cdns3_gadget_ep0_desc;
+	priv_dev->gadget.ep0 = &priv_ep->endpoint;
+	priv_ep->type = USB_ENDPOINT_XFER_CONTROL;
+
+	return cdns3_allocate_trb_pool(priv_ep);
+}
diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c
new file mode 100644
index 000000000..ccdd525bd
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-gadget.c
@@ -0,0 +1,3500 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS DRD Driver - gadget side.
+ *
+ * Copyright (C) 2018-2019 Cadence Design Systems.
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Pawel Jez <pjez@cadence.com>,
+ *          Pawel Laszczak <pawell@cadence.com>
+ *          Peter Chen <peter.chen@nxp.com>
+ */
+
+/*
+ * Work around 1:
+ * At some situations, the controller may get stale data address in TRB
+ * at below sequences:
+ * 1. Controller read TRB includes data address
+ * 2. Software updates TRBs includes data address and Cycle bit
+ * 3. Controller read TRB which includes Cycle bit
+ * 4. DMA run with stale data address
+ *
+ * To fix this problem, driver needs to make the first TRB in TD as invalid.
+ * After preparing all TRBs driver needs to check the position of DMA and
+ * if the DMA point to the first just added TRB and doorbell is 1,
+ * then driver must defer making this TRB as valid. This TRB will be make
+ * as valid during adding next TRB only if DMA is stopped or at TRBERR
+ * interrupt.
+ *
+ * Issue has been fixed in DEV_VER_V3 version of controller.
+ *
+ * Work around 2:
+ * Controller for OUT endpoints has shared on-chip buffers for all incoming
+ * packets, including ep0out. It's FIFO buffer, so packets must be handle by DMA
+ * in correct order. If the first packet in the buffer will not be handled,
+ * then the following packets directed for other endpoints and  functions
+ * will be blocked.
+ * Additionally the packets directed to one endpoint can block entire on-chip
+ * buffers. In this case transfer to other endpoints also will blocked.
+ *
+ * To resolve this issue after raising the descriptor missing interrupt
+ * driver prepares internal usb_request object and use it to arm DMA transfer.
+ *
+ * The problematic situation was observed in case when endpoint has been enabled
+ * but no usb_request were queued. Driver try detects such endpoints and will
+ * use this workaround only for these endpoint.
+ *
+ * Driver use limited number of buffer. This number can be set by macro
+ * CDNS3_WA2_NUM_BUFFERS.
+ *
+ * Such blocking situation was observed on ACM gadget. For this function
+ * host send OUT data packet but ACM function is not prepared for this packet.
+ * It's cause that buffer placed in on chip memory block transfer to other
+ * endpoints.
+ *
+ * Issue has been fixed in DEV_VER_V2 version of controller.
+ *
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/usb/gadget.h>
+#include <linux/module.h>
+#include <linux/dmapool.h>
+#include <linux/iopoll.h>
+
+#include "core.h"
+#include "gadget-export.h"
+#include "cdns3-gadget.h"
+#include "cdns3-trace.h"
+#include "drd.h"
+
+static int __cdns3_gadget_ep_queue(struct usb_ep *ep,
+				   struct usb_request *request,
+				   gfp_t gfp_flags);
+
+static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
+				 struct usb_request *request);
+
+static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep,
+					struct usb_request *request);
+
+/**
+ * cdns3_clear_register_bit - clear bit in given register.
+ * @ptr: address of device controller register to be read and changed
+ * @mask: bits requested to clar
+ */
+static void cdns3_clear_register_bit(void __iomem *ptr, u32 mask)
+{
+	mask = readl(ptr) & ~mask;
+	writel(mask, ptr);
+}
+
+/**
+ * cdns3_set_register_bit - set bit in given register.
+ * @ptr: address of device controller register to be read and changed
+ * @mask: bits requested to set
+ */
+void cdns3_set_register_bit(void __iomem *ptr, u32 mask)
+{
+	mask = readl(ptr) | mask;
+	writel(mask, ptr);
+}
+
+/**
+ * cdns3_ep_addr_to_index - Macro converts endpoint address to
+ * index of endpoint object in cdns3_device.eps[] container
+ * @ep_addr: endpoint address for which endpoint object is required
+ *
+ */
+u8 cdns3_ep_addr_to_index(u8 ep_addr)
+{
+	return (((ep_addr & 0x7F)) + ((ep_addr & USB_DIR_IN) ? 16 : 0));
+}
+
+static int cdns3_get_dma_pos(struct cdns3_device *priv_dev,
+			     struct cdns3_endpoint *priv_ep)
+{
+	int dma_index;
+
+	dma_index = readl(&priv_dev->regs->ep_traddr) - priv_ep->trb_pool_dma;
+
+	return dma_index / TRB_SIZE;
+}
+
+/**
+ * cdns3_next_request - returns next request from list
+ * @list: list containing requests
+ *
+ * Returns request or NULL if no requests in list
+ */
+struct usb_request *cdns3_next_request(struct list_head *list)
+{
+	return list_first_entry_or_null(list, struct usb_request, list);
+}
+
+/**
+ * cdns3_next_align_buf - returns next buffer from list
+ * @list: list containing buffers
+ *
+ * Returns buffer or NULL if no buffers in list
+ */
+static struct cdns3_aligned_buf *cdns3_next_align_buf(struct list_head *list)
+{
+	return list_first_entry_or_null(list, struct cdns3_aligned_buf, list);
+}
+
+/**
+ * cdns3_next_priv_request - returns next request from list
+ * @list: list containing requests
+ *
+ * Returns request or NULL if no requests in list
+ */
+static struct cdns3_request *cdns3_next_priv_request(struct list_head *list)
+{
+	return list_first_entry_or_null(list, struct cdns3_request, list);
+}
+
+/**
+ * cdns3_select_ep - selects endpoint
+ * @priv_dev:  extended gadget object
+ * @ep: endpoint address
+ */
+void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep)
+{
+	if (priv_dev->selected_ep == ep)
+		return;
+
+	priv_dev->selected_ep = ep;
+	writel(ep, &priv_dev->regs->ep_sel);
+}
+
+/**
+ * cdns3_get_tdl - gets current tdl for selected endpoint.
+ * @priv_dev:  extended gadget object
+ *
+ * Before calling this function the appropriate endpoint must
+ * be selected by means of cdns3_select_ep function.
+ */
+static int cdns3_get_tdl(struct cdns3_device *priv_dev)
+{
+	if (priv_dev->dev_ver < DEV_VER_V3)
+		return EP_CMD_TDL_GET(readl(&priv_dev->regs->ep_cmd));
+	else
+		return readl(&priv_dev->regs->ep_tdl);
+}
+
+dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep,
+				 struct cdns3_trb *trb)
+{
+	u32 offset = (char *)trb - (char *)priv_ep->trb_pool;
+
+	return priv_ep->trb_pool_dma + offset;
+}
+
+static void cdns3_free_trb_pool(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+	if (priv_ep->trb_pool) {
+		dma_pool_free(priv_dev->eps_dma_pool,
+			      priv_ep->trb_pool, priv_ep->trb_pool_dma);
+		priv_ep->trb_pool = NULL;
+	}
+}
+
+/**
+ * cdns3_allocate_trb_pool - Allocates TRB's pool for selected endpoint
+ * @priv_ep:  endpoint object
+ *
+ * Function will return 0 on success or -ENOMEM on allocation error
+ */
+int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	int ring_size = TRB_RING_SIZE;
+	int num_trbs = ring_size / TRB_SIZE;
+	struct cdns3_trb *link_trb;
+
+	if (priv_ep->trb_pool && priv_ep->alloc_ring_size < ring_size)
+		cdns3_free_trb_pool(priv_ep);
+
+	if (!priv_ep->trb_pool) {
+		priv_ep->trb_pool = dma_pool_alloc(priv_dev->eps_dma_pool,
+						   GFP_ATOMIC,
+						   &priv_ep->trb_pool_dma);
+
+		if (!priv_ep->trb_pool)
+			return -ENOMEM;
+
+		priv_ep->alloc_ring_size = ring_size;
+	}
+
+	memset(priv_ep->trb_pool, 0, ring_size);
+
+	priv_ep->num_trbs = num_trbs;
+
+	if (!priv_ep->num)
+		return 0;
+
+	/* Initialize the last TRB as Link TRB */
+	link_trb = (priv_ep->trb_pool + (priv_ep->num_trbs - 1));
+
+	if (priv_ep->use_streams) {
+		/*
+		 * For stream capable endpoints driver use single correct TRB.
+		 * The last trb has zeroed cycle bit
+		 */
+		link_trb->control = 0;
+	} else {
+		link_trb->buffer = cpu_to_le32(TRB_BUFFER(priv_ep->trb_pool_dma));
+		link_trb->control = cpu_to_le32(TRB_CYCLE | TRB_TYPE(TRB_LINK) | TRB_TOGGLE);
+	}
+	return 0;
+}
+
+/**
+ * cdns3_ep_stall_flush - Stalls and flushes selected endpoint
+ * @priv_ep: endpoint object
+ *
+ * Endpoint must be selected before call to this function
+ */
+static void cdns3_ep_stall_flush(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	int val;
+
+	trace_cdns3_halt(priv_ep, 1, 1);
+
+	writel(EP_CMD_DFLUSH | EP_CMD_ERDY | EP_CMD_SSTALL,
+	       &priv_dev->regs->ep_cmd);
+
+	/* wait for DFLUSH cleared */
+	readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+				  !(val & EP_CMD_DFLUSH), 1, 1000);
+	priv_ep->flags |= EP_STALLED;
+	priv_ep->flags &= ~EP_STALL_PENDING;
+}
+
+/**
+ * cdns3_hw_reset_eps_config - reset endpoints configuration kept by controller.
+ * @priv_dev: extended gadget object
+ */
+void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev)
+{
+	int i;
+
+	writel(USB_CONF_CFGRST, &priv_dev->regs->usb_conf);
+
+	cdns3_allow_enable_l1(priv_dev, 0);
+	priv_dev->hw_configured_flag = 0;
+	priv_dev->onchip_used_size = 0;
+	priv_dev->out_mem_is_allocated = 0;
+	priv_dev->wait_for_setup = 0;
+	priv_dev->using_streams = 0;
+
+	for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++)
+		if (priv_dev->eps[i])
+			priv_dev->eps[i]->flags &= ~EP_CONFIGURED;
+}
+
+/**
+ * cdns3_ep_inc_trb - increment a trb index.
+ * @index: Pointer to the TRB index to increment.
+ * @cs: Cycle state
+ * @trb_in_seg: number of TRBs in segment
+ *
+ * The index should never point to the link TRB. After incrementing,
+ * if it is point to the link TRB, wrap around to the beginning and revert
+ * cycle state bit The
+ * link TRB is always at the last TRB entry.
+ */
+static void cdns3_ep_inc_trb(int *index, u8 *cs, int trb_in_seg)
+{
+	(*index)++;
+	if (*index == (trb_in_seg - 1)) {
+		*index = 0;
+		*cs ^=  1;
+	}
+}
+
+/**
+ * cdns3_ep_inc_enq - increment endpoint's enqueue pointer
+ * @priv_ep: The endpoint whose enqueue pointer we're incrementing
+ */
+static void cdns3_ep_inc_enq(struct cdns3_endpoint *priv_ep)
+{
+	priv_ep->free_trbs--;
+	cdns3_ep_inc_trb(&priv_ep->enqueue, &priv_ep->pcs, priv_ep->num_trbs);
+}
+
+/**
+ * cdns3_ep_inc_deq - increment endpoint's dequeue pointer
+ * @priv_ep: The endpoint whose dequeue pointer we're incrementing
+ */
+static void cdns3_ep_inc_deq(struct cdns3_endpoint *priv_ep)
+{
+	priv_ep->free_trbs++;
+	cdns3_ep_inc_trb(&priv_ep->dequeue, &priv_ep->ccs, priv_ep->num_trbs);
+}
+
+/**
+ * cdns3_allow_enable_l1 - enable/disable permits to transition to L1.
+ * @priv_dev: Extended gadget object
+ * @enable: Enable/disable permit to transition to L1.
+ *
+ * If bit USB_CONF_L1EN is set and device receive Extended Token packet,
+ * then controller answer with ACK handshake.
+ * If bit USB_CONF_L1DS is set and device receive Extended Token packet,
+ * then controller answer with NYET handshake.
+ */
+void cdns3_allow_enable_l1(struct cdns3_device *priv_dev, int enable)
+{
+	if (enable)
+		writel(USB_CONF_L1EN, &priv_dev->regs->usb_conf);
+	else
+		writel(USB_CONF_L1DS, &priv_dev->regs->usb_conf);
+}
+
+enum usb_device_speed cdns3_get_speed(struct cdns3_device *priv_dev)
+{
+	u32 reg;
+
+	reg = readl(&priv_dev->regs->usb_sts);
+
+	if (DEV_SUPERSPEED(reg))
+		return USB_SPEED_SUPER;
+	else if (DEV_HIGHSPEED(reg))
+		return USB_SPEED_HIGH;
+	else if (DEV_FULLSPEED(reg))
+		return USB_SPEED_FULL;
+	else if (DEV_LOWSPEED(reg))
+		return USB_SPEED_LOW;
+	return USB_SPEED_UNKNOWN;
+}
+
+/**
+ * cdns3_start_all_request - add to ring all request not started
+ * @priv_dev: Extended gadget object
+ * @priv_ep: The endpoint for whom request will be started.
+ *
+ * Returns return ENOMEM if transfer ring i not enough TRBs to start
+ *         all requests.
+ */
+static int cdns3_start_all_request(struct cdns3_device *priv_dev,
+				   struct cdns3_endpoint *priv_ep)
+{
+	struct usb_request *request;
+	int ret = 0;
+	u8 pending_empty = list_empty(&priv_ep->pending_req_list);
+
+	/*
+	 * If the last pending transfer is INTERNAL
+	 * OR streams are enabled for this endpoint
+	 * do NOT start new transfer till the last one is pending
+	 */
+	if (!pending_empty) {
+		struct cdns3_request *priv_req;
+
+		request = cdns3_next_request(&priv_ep->pending_req_list);
+		priv_req = to_cdns3_request(request);
+		if ((priv_req->flags & REQUEST_INTERNAL) ||
+		    (priv_ep->flags & EP_TDLCHK_EN) ||
+			priv_ep->use_streams) {
+			dev_dbg(priv_dev->dev, "Blocking external request\n");
+			return ret;
+		}
+	}
+
+	while (!list_empty(&priv_ep->deferred_req_list)) {
+		request = cdns3_next_request(&priv_ep->deferred_req_list);
+
+		if (!priv_ep->use_streams) {
+			ret = cdns3_ep_run_transfer(priv_ep, request);
+		} else {
+			priv_ep->stream_sg_idx = 0;
+			ret = cdns3_ep_run_stream_transfer(priv_ep, request);
+		}
+		if (ret)
+			return ret;
+
+		list_move_tail(&request->list, &priv_ep->pending_req_list);
+		if (request->stream_id != 0 || (priv_ep->flags & EP_TDLCHK_EN))
+			break;
+	}
+
+	priv_ep->flags &= ~EP_RING_FULL;
+	return ret;
+}
+
+/*
+ * WA2: Set flag for all not ISOC OUT endpoints. If this flag is set
+ * driver try to detect whether endpoint need additional internal
+ * buffer for unblocking on-chip FIFO buffer. This flag will be cleared
+ * if before first DESCMISS interrupt the DMA will be armed.
+ */
+#define cdns3_wa2_enable_detection(priv_dev, priv_ep, reg) do { \
+	if (!priv_ep->dir && priv_ep->type != USB_ENDPOINT_XFER_ISOC) { \
+		priv_ep->flags |= EP_QUIRK_EXTRA_BUF_DET; \
+		(reg) |= EP_STS_EN_DESCMISEN; \
+	} } while (0)
+
+static void __cdns3_descmiss_copy_data(struct usb_request *request,
+	struct usb_request *descmiss_req)
+{
+	int length = request->actual + descmiss_req->actual;
+	struct scatterlist *s = request->sg;
+
+	if (!s) {
+		if (length <= request->length) {
+			memcpy(&((u8 *)request->buf)[request->actual],
+			       descmiss_req->buf,
+			       descmiss_req->actual);
+			request->actual = length;
+		} else {
+			/* It should never occures */
+			request->status = -ENOMEM;
+		}
+	} else {
+		if (length <= sg_dma_len(s)) {
+			void *p = phys_to_virt(sg_dma_address(s));
+
+			memcpy(&((u8 *)p)[request->actual],
+				descmiss_req->buf,
+				descmiss_req->actual);
+			request->actual = length;
+		} else {
+			request->status = -ENOMEM;
+		}
+	}
+}
+
+/**
+ * cdns3_wa2_descmiss_copy_data - copy data from internal requests to
+ * request queued by class driver.
+ * @priv_ep: extended endpoint object
+ * @request: request object
+ */
+static void cdns3_wa2_descmiss_copy_data(struct cdns3_endpoint *priv_ep,
+					 struct usb_request *request)
+{
+	struct usb_request *descmiss_req;
+	struct cdns3_request *descmiss_priv_req;
+
+	while (!list_empty(&priv_ep->wa2_descmiss_req_list)) {
+		int chunk_end;
+
+		descmiss_priv_req =
+			cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list);
+		descmiss_req = &descmiss_priv_req->request;
+
+		/* driver can't touch pending request */
+		if (descmiss_priv_req->flags & REQUEST_PENDING)
+			break;
+
+		chunk_end = descmiss_priv_req->flags & REQUEST_INTERNAL_CH;
+		request->status = descmiss_req->status;
+		__cdns3_descmiss_copy_data(request, descmiss_req);
+		list_del_init(&descmiss_priv_req->list);
+		kfree(descmiss_req->buf);
+		cdns3_gadget_ep_free_request(&priv_ep->endpoint, descmiss_req);
+		--priv_ep->wa2_counter;
+
+		if (!chunk_end)
+			break;
+	}
+}
+
+static struct usb_request *cdns3_wa2_gadget_giveback(struct cdns3_device *priv_dev,
+						     struct cdns3_endpoint *priv_ep,
+						     struct cdns3_request *priv_req)
+{
+	if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN &&
+	    priv_req->flags & REQUEST_INTERNAL) {
+		struct usb_request *req;
+
+		req = cdns3_next_request(&priv_ep->deferred_req_list);
+
+		priv_ep->descmis_req = NULL;
+
+		if (!req)
+			return NULL;
+
+		/* unmap the gadget request before copying data */
+		usb_gadget_unmap_request_by_dev(priv_dev->sysdev, req,
+						priv_ep->dir);
+
+		cdns3_wa2_descmiss_copy_data(priv_ep, req);
+		if (!(priv_ep->flags & EP_QUIRK_END_TRANSFER) &&
+		    req->length != req->actual) {
+			/* wait for next part of transfer */
+			/* re-map the gadget request buffer*/
+			usb_gadget_map_request_by_dev(priv_dev->sysdev, req,
+				usb_endpoint_dir_in(priv_ep->endpoint.desc));
+			return NULL;
+		}
+
+		if (req->status == -EINPROGRESS)
+			req->status = 0;
+
+		list_del_init(&req->list);
+		cdns3_start_all_request(priv_dev, priv_ep);
+		return req;
+	}
+
+	return &priv_req->request;
+}
+
+static int cdns3_wa2_gadget_ep_queue(struct cdns3_device *priv_dev,
+				     struct cdns3_endpoint *priv_ep,
+				     struct cdns3_request *priv_req)
+{
+	int deferred = 0;
+
+	/*
+	 * If transfer was queued before DESCMISS appear than we
+	 * can disable handling of DESCMISS interrupt. Driver assumes that it
+	 * can disable special treatment for this endpoint.
+	 */
+	if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) {
+		u32 reg;
+
+		cdns3_select_ep(priv_dev, priv_ep->num | priv_ep->dir);
+		priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET;
+		reg = readl(&priv_dev->regs->ep_sts_en);
+		reg &= ~EP_STS_EN_DESCMISEN;
+		trace_cdns3_wa2(priv_ep, "workaround disabled\n");
+		writel(reg, &priv_dev->regs->ep_sts_en);
+	}
+
+	if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) {
+		u8 pending_empty = list_empty(&priv_ep->pending_req_list);
+		u8 descmiss_empty = list_empty(&priv_ep->wa2_descmiss_req_list);
+
+		/*
+		 *  DESCMISS transfer has been finished, so data will be
+		 *  directly copied from internal allocated usb_request
+		 *  objects.
+		 */
+		if (pending_empty && !descmiss_empty &&
+		    !(priv_req->flags & REQUEST_INTERNAL)) {
+			cdns3_wa2_descmiss_copy_data(priv_ep,
+						     &priv_req->request);
+
+			trace_cdns3_wa2(priv_ep, "get internal stored data");
+
+			list_add_tail(&priv_req->request.list,
+				      &priv_ep->pending_req_list);
+			cdns3_gadget_giveback(priv_ep, priv_req,
+					      priv_req->request.status);
+
+			/*
+			 * Intentionally driver returns positive value as
+			 * correct value. It informs that transfer has
+			 * been finished.
+			 */
+			return EINPROGRESS;
+		}
+
+		/*
+		 * Driver will wait for completion DESCMISS transfer,
+		 * before starts new, not DESCMISS transfer.
+		 */
+		if (!pending_empty && !descmiss_empty) {
+			trace_cdns3_wa2(priv_ep, "wait for pending transfer\n");
+			deferred = 1;
+		}
+
+		if (priv_req->flags & REQUEST_INTERNAL)
+			list_add_tail(&priv_req->list,
+				      &priv_ep->wa2_descmiss_req_list);
+	}
+
+	return deferred;
+}
+
+static void cdns3_wa2_remove_old_request(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_request *priv_req;
+
+	while (!list_empty(&priv_ep->wa2_descmiss_req_list)) {
+		u8 chain;
+
+		priv_req = cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list);
+		chain = !!(priv_req->flags & REQUEST_INTERNAL_CH);
+
+		trace_cdns3_wa2(priv_ep, "removes eldest request");
+
+		kfree(priv_req->request.buf);
+		list_del_init(&priv_req->list);
+		cdns3_gadget_ep_free_request(&priv_ep->endpoint,
+					     &priv_req->request);
+		--priv_ep->wa2_counter;
+
+		if (!chain)
+			break;
+	}
+}
+
+/**
+ * cdns3_wa2_descmissing_packet - handles descriptor missing event.
+ * @priv_ep: extended gadget object
+ *
+ * This function is used only for WA2. For more information see Work around 2
+ * description.
+ */
+static void cdns3_wa2_descmissing_packet(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_request *priv_req;
+	struct usb_request *request;
+	u8 pending_empty = list_empty(&priv_ep->pending_req_list);
+
+	/* check for pending transfer */
+	if (!pending_empty) {
+		trace_cdns3_wa2(priv_ep, "Ignoring Descriptor missing IRQ\n");
+		return;
+	}
+
+	if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) {
+		priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET;
+		priv_ep->flags |= EP_QUIRK_EXTRA_BUF_EN;
+	}
+
+	trace_cdns3_wa2(priv_ep, "Description Missing detected\n");
+
+	if (priv_ep->wa2_counter >= CDNS3_WA2_NUM_BUFFERS) {
+		trace_cdns3_wa2(priv_ep, "WA2 overflow\n");
+		cdns3_wa2_remove_old_request(priv_ep);
+	}
+
+	request = cdns3_gadget_ep_alloc_request(&priv_ep->endpoint,
+						GFP_ATOMIC);
+	if (!request)
+		goto err;
+
+	priv_req = to_cdns3_request(request);
+	priv_req->flags |= REQUEST_INTERNAL;
+
+	/* if this field is still assigned it indicate that transfer related
+	 * with this request has not been finished yet. Driver in this
+	 * case simply allocate next request and assign flag REQUEST_INTERNAL_CH
+	 * flag to previous one. It will indicate that current request is
+	 * part of the previous one.
+	 */
+	if (priv_ep->descmis_req)
+		priv_ep->descmis_req->flags |= REQUEST_INTERNAL_CH;
+
+	priv_req->request.buf = kzalloc(CDNS3_DESCMIS_BUF_SIZE,
+					GFP_ATOMIC);
+	priv_ep->wa2_counter++;
+
+	if (!priv_req->request.buf) {
+		cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
+		goto err;
+	}
+
+	priv_req->request.length = CDNS3_DESCMIS_BUF_SIZE;
+	priv_ep->descmis_req = priv_req;
+
+	__cdns3_gadget_ep_queue(&priv_ep->endpoint,
+				&priv_ep->descmis_req->request,
+				GFP_ATOMIC);
+
+	return;
+
+err:
+	dev_err(priv_ep->cdns3_dev->dev,
+		"Failed: No sufficient memory for DESCMIS\n");
+}
+
+static void cdns3_wa2_reset_tdl(struct cdns3_device *priv_dev)
+{
+	u16 tdl = EP_CMD_TDL_GET(readl(&priv_dev->regs->ep_cmd));
+
+	if (tdl) {
+		u16 reset_val = EP_CMD_TDL_MAX + 1 - tdl;
+
+		writel(EP_CMD_TDL_SET(reset_val) | EP_CMD_STDL,
+		       &priv_dev->regs->ep_cmd);
+	}
+}
+
+static void cdns3_wa2_check_outq_status(struct cdns3_device *priv_dev)
+{
+	u32 ep_sts_reg;
+
+	/* select EP0-out */
+	cdns3_select_ep(priv_dev, 0);
+
+	ep_sts_reg = readl(&priv_dev->regs->ep_sts);
+
+	if (EP_STS_OUTQ_VAL(ep_sts_reg)) {
+		u32 outq_ep_num = EP_STS_OUTQ_NO(ep_sts_reg);
+		struct cdns3_endpoint *outq_ep = priv_dev->eps[outq_ep_num];
+
+		if ((outq_ep->flags & EP_ENABLED) && !(outq_ep->use_streams) &&
+		    outq_ep->type != USB_ENDPOINT_XFER_ISOC && outq_ep_num) {
+			u8 pending_empty = list_empty(&outq_ep->pending_req_list);
+
+			if ((outq_ep->flags & EP_QUIRK_EXTRA_BUF_DET) ||
+			    (outq_ep->flags & EP_QUIRK_EXTRA_BUF_EN) ||
+			    !pending_empty) {
+			} else {
+				u32 ep_sts_en_reg;
+				u32 ep_cmd_reg;
+
+				cdns3_select_ep(priv_dev, outq_ep->num |
+						outq_ep->dir);
+				ep_sts_en_reg = readl(&priv_dev->regs->ep_sts_en);
+				ep_cmd_reg = readl(&priv_dev->regs->ep_cmd);
+
+				outq_ep->flags |= EP_TDLCHK_EN;
+				cdns3_set_register_bit(&priv_dev->regs->ep_cfg,
+						       EP_CFG_TDL_CHK);
+
+				cdns3_wa2_enable_detection(priv_dev, outq_ep,
+							   ep_sts_en_reg);
+				writel(ep_sts_en_reg,
+				       &priv_dev->regs->ep_sts_en);
+				/* reset tdl value to zero */
+				cdns3_wa2_reset_tdl(priv_dev);
+				/*
+				 * Memory barrier - Reset tdl before ringing the
+				 * doorbell.
+				 */
+				wmb();
+				if (EP_CMD_DRDY & ep_cmd_reg) {
+					trace_cdns3_wa2(outq_ep, "Enabling WA2 skipping doorbell\n");
+
+				} else {
+					trace_cdns3_wa2(outq_ep, "Enabling WA2 ringing doorbell\n");
+					/*
+					 * ring doorbell to generate DESCMIS irq
+					 */
+					writel(EP_CMD_DRDY,
+					       &priv_dev->regs->ep_cmd);
+				}
+			}
+		}
+	}
+}
+
+/**
+ * cdns3_gadget_giveback - call struct usb_request's ->complete callback
+ * @priv_ep: The endpoint to whom the request belongs to
+ * @priv_req: The request we're giving back
+ * @status: completion code for the request
+ *
+ * Must be called with controller's lock held and interrupts disabled. This
+ * function will unmap @req and call its ->complete() callback to notify upper
+ * layers that it has completed.
+ */
+void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep,
+			   struct cdns3_request *priv_req,
+			   int status)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	struct usb_request *request = &priv_req->request;
+
+	list_del_init(&request->list);
+
+	if (request->status == -EINPROGRESS)
+		request->status = status;
+
+	usb_gadget_unmap_request_by_dev(priv_dev->sysdev, request,
+					priv_ep->dir);
+
+	if ((priv_req->flags & REQUEST_UNALIGNED) &&
+	    priv_ep->dir == USB_DIR_OUT && !request->status) {
+		/* Make DMA buffer CPU accessible */
+		dma_sync_single_for_cpu(priv_dev->sysdev,
+			priv_req->aligned_buf->dma,
+			priv_req->aligned_buf->size,
+			priv_req->aligned_buf->dir);
+		memcpy(request->buf, priv_req->aligned_buf->buf,
+		       request->length);
+	}
+
+	priv_req->flags &= ~(REQUEST_PENDING | REQUEST_UNALIGNED);
+	/* All TRBs have finished, clear the counter */
+	priv_req->finished_trb = 0;
+	trace_cdns3_gadget_giveback(priv_req);
+
+	if (priv_dev->dev_ver < DEV_VER_V2) {
+		request = cdns3_wa2_gadget_giveback(priv_dev, priv_ep,
+						    priv_req);
+		if (!request)
+			return;
+	}
+
+	if (request->complete) {
+		spin_unlock(&priv_dev->lock);
+		usb_gadget_giveback_request(&priv_ep->endpoint,
+					    request);
+		spin_lock(&priv_dev->lock);
+	}
+
+	if (request->buf == priv_dev->zlp_buf)
+		cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
+}
+
+static void cdns3_wa1_restore_cycle_bit(struct cdns3_endpoint *priv_ep)
+{
+	/* Work around for stale data address in TRB*/
+	if (priv_ep->wa1_set) {
+		trace_cdns3_wa1(priv_ep, "restore cycle bit");
+
+		priv_ep->wa1_set = 0;
+		priv_ep->wa1_trb_index = 0xFFFF;
+		if (priv_ep->wa1_cycle_bit) {
+			priv_ep->wa1_trb->control =
+				priv_ep->wa1_trb->control | cpu_to_le32(0x1);
+		} else {
+			priv_ep->wa1_trb->control =
+				priv_ep->wa1_trb->control & cpu_to_le32(~0x1);
+		}
+	}
+}
+
+static void cdns3_free_aligned_request_buf(struct work_struct *work)
+{
+	struct cdns3_device *priv_dev = container_of(work, struct cdns3_device,
+					aligned_buf_wq);
+	struct cdns3_aligned_buf *buf, *tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+
+	list_for_each_entry_safe(buf, tmp, &priv_dev->aligned_buf_list, list) {
+		if (!buf->in_use) {
+			list_del(&buf->list);
+
+			/*
+			 * Re-enable interrupts to free DMA capable memory.
+			 * Driver can't free this memory with disabled
+			 * interrupts.
+			 */
+			spin_unlock_irqrestore(&priv_dev->lock, flags);
+			dma_free_noncoherent(priv_dev->sysdev, buf->size,
+					  buf->buf, buf->dma, buf->dir);
+			kfree(buf);
+			spin_lock_irqsave(&priv_dev->lock, flags);
+		}
+	}
+
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+}
+
+static int cdns3_prepare_aligned_request_buf(struct cdns3_request *priv_req)
+{
+	struct cdns3_endpoint *priv_ep = priv_req->priv_ep;
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	struct cdns3_aligned_buf *buf;
+
+	/* check if buffer is aligned to 8. */
+	if (!((uintptr_t)priv_req->request.buf & 0x7))
+		return 0;
+
+	buf = priv_req->aligned_buf;
+
+	if (!buf || priv_req->request.length > buf->size) {
+		buf = kzalloc(sizeof(*buf), GFP_ATOMIC);
+		if (!buf)
+			return -ENOMEM;
+
+		buf->size = priv_req->request.length;
+		buf->dir = usb_endpoint_dir_in(priv_ep->endpoint.desc) ?
+			DMA_TO_DEVICE : DMA_FROM_DEVICE;
+
+		buf->buf = dma_alloc_noncoherent(priv_dev->sysdev,
+					      buf->size,
+					      &buf->dma,
+					      buf->dir,
+					      GFP_ATOMIC);
+		if (!buf->buf) {
+			kfree(buf);
+			return -ENOMEM;
+		}
+
+		if (priv_req->aligned_buf) {
+			trace_cdns3_free_aligned_request(priv_req);
+			priv_req->aligned_buf->in_use = 0;
+			queue_work(system_freezable_wq,
+				   &priv_dev->aligned_buf_wq);
+		}
+
+		buf->in_use = 1;
+		priv_req->aligned_buf = buf;
+
+		list_add_tail(&buf->list,
+			      &priv_dev->aligned_buf_list);
+	}
+
+	if (priv_ep->dir == USB_DIR_IN) {
+		/* Make DMA buffer CPU accessible */
+		dma_sync_single_for_cpu(priv_dev->sysdev,
+			buf->dma, buf->size, buf->dir);
+		memcpy(buf->buf, priv_req->request.buf,
+		       priv_req->request.length);
+	}
+
+	/* Transfer DMA buffer ownership back to device */
+	dma_sync_single_for_device(priv_dev->sysdev,
+			buf->dma, buf->size, buf->dir);
+
+	priv_req->flags |= REQUEST_UNALIGNED;
+	trace_cdns3_prepare_aligned_request(priv_req);
+
+	return 0;
+}
+
+static int cdns3_wa1_update_guard(struct cdns3_endpoint *priv_ep,
+				  struct cdns3_trb *trb)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+	if (!priv_ep->wa1_set) {
+		u32 doorbell;
+
+		doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
+
+		if (doorbell) {
+			priv_ep->wa1_cycle_bit = priv_ep->pcs ? TRB_CYCLE : 0;
+			priv_ep->wa1_set = 1;
+			priv_ep->wa1_trb = trb;
+			priv_ep->wa1_trb_index = priv_ep->enqueue;
+			trace_cdns3_wa1(priv_ep, "set guard");
+			return 0;
+		}
+	}
+	return 1;
+}
+
+static void cdns3_wa1_tray_restore_cycle_bit(struct cdns3_device *priv_dev,
+					     struct cdns3_endpoint *priv_ep)
+{
+	int dma_index;
+	u32 doorbell;
+
+	doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
+	dma_index = cdns3_get_dma_pos(priv_dev, priv_ep);
+
+	if (!doorbell || dma_index != priv_ep->wa1_trb_index)
+		cdns3_wa1_restore_cycle_bit(priv_ep);
+}
+
+static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep,
+					struct usb_request *request)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	struct cdns3_request *priv_req;
+	struct cdns3_trb *trb;
+	dma_addr_t trb_dma;
+	int address;
+	u32 control;
+	u32 length;
+	u32 tdl;
+	unsigned int sg_idx = priv_ep->stream_sg_idx;
+
+	priv_req = to_cdns3_request(request);
+	address = priv_ep->endpoint.desc->bEndpointAddress;
+
+	priv_ep->flags |= EP_PENDING_REQUEST;
+
+	/* must allocate buffer aligned to 8 */
+	if (priv_req->flags & REQUEST_UNALIGNED)
+		trb_dma = priv_req->aligned_buf->dma;
+	else
+		trb_dma = request->dma;
+
+	/*  For stream capable endpoints driver use only single TD. */
+	trb = priv_ep->trb_pool + priv_ep->enqueue;
+	priv_req->start_trb = priv_ep->enqueue;
+	priv_req->end_trb = priv_req->start_trb;
+	priv_req->trb = trb;
+
+	cdns3_select_ep(priv_ep->cdns3_dev, address);
+
+	control = TRB_TYPE(TRB_NORMAL) | TRB_CYCLE |
+		  TRB_STREAM_ID(priv_req->request.stream_id) | TRB_ISP;
+
+	if (!request->num_sgs) {
+		trb->buffer = cpu_to_le32(TRB_BUFFER(trb_dma));
+		length = request->length;
+	} else {
+		trb->buffer = cpu_to_le32(TRB_BUFFER(request->sg[sg_idx].dma_address));
+		length = request->sg[sg_idx].length;
+	}
+
+	tdl = DIV_ROUND_UP(length, priv_ep->endpoint.maxpacket);
+
+	trb->length = cpu_to_le32(TRB_BURST_LEN(16) | TRB_LEN(length));
+
+	/*
+	 * For DEV_VER_V2 controller version we have enabled
+	 * USB_CONF2_EN_TDL_TRB in DMULT configuration.
+	 * This enables TDL calculation based on TRB, hence setting TDL in TRB.
+	 */
+	if (priv_dev->dev_ver >= DEV_VER_V2) {
+		if (priv_dev->gadget.speed == USB_SPEED_SUPER)
+			trb->length |= cpu_to_le32(TRB_TDL_SS_SIZE(tdl));
+	}
+	priv_req->flags |= REQUEST_PENDING;
+
+	trb->control = cpu_to_le32(control);
+
+	trace_cdns3_prepare_trb(priv_ep, priv_req->trb);
+
+	/*
+	 * Memory barrier - Cycle Bit must be set before trb->length  and
+	 * trb->buffer fields.
+	 */
+	wmb();
+
+	/* always first element */
+	writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma),
+	       &priv_dev->regs->ep_traddr);
+
+	if (!(priv_ep->flags & EP_STALLED)) {
+		trace_cdns3_ring(priv_ep);
+		/*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/
+		writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts);
+
+		priv_ep->prime_flag = false;
+
+		/*
+		 * Controller version DEV_VER_V2 tdl calculation
+		 * is based on TRB
+		 */
+
+		if (priv_dev->dev_ver < DEV_VER_V2)
+			writel(EP_CMD_TDL_SET(tdl) | EP_CMD_STDL,
+			       &priv_dev->regs->ep_cmd);
+		else if (priv_dev->dev_ver > DEV_VER_V2)
+			writel(tdl, &priv_dev->regs->ep_tdl);
+
+		priv_ep->last_stream_id = priv_req->request.stream_id;
+		writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
+		writel(EP_CMD_ERDY_SID(priv_req->request.stream_id) |
+		       EP_CMD_ERDY, &priv_dev->regs->ep_cmd);
+
+		trace_cdns3_doorbell_epx(priv_ep->name,
+					 readl(&priv_dev->regs->ep_traddr));
+	}
+
+	/* WORKAROUND for transition to L0 */
+	__cdns3_gadget_wakeup(priv_dev);
+
+	return 0;
+}
+
+static void cdns3_rearm_drdy_if_needed(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+	if (priv_dev->dev_ver < DEV_VER_V3)
+		return;
+
+	if (readl(&priv_dev->regs->ep_sts) & EP_STS_TRBERR) {
+		writel(EP_STS_TRBERR, &priv_dev->regs->ep_sts);
+		writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
+	}
+}
+
+/**
+ * cdns3_ep_run_transfer - start transfer on no-default endpoint hardware
+ * @priv_ep: endpoint object
+ * @request: request object
+ *
+ * Returns zero on success or negative value on failure
+ */
+static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
+				 struct usb_request *request)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	struct cdns3_request *priv_req;
+	struct cdns3_trb *trb;
+	struct cdns3_trb *link_trb = NULL;
+	dma_addr_t trb_dma;
+	u32 togle_pcs = 1;
+	int sg_iter = 0;
+	int num_trb_req;
+	int trb_burst;
+	int num_trb;
+	int address;
+	u32 control;
+	int pcs;
+	u16 total_tdl = 0;
+	struct scatterlist *s = NULL;
+	bool sg_supported = !!(request->num_mapped_sgs);
+
+	num_trb_req = sg_supported ? request->num_mapped_sgs : 1;
+
+	/* ISO transfer require each SOF have a TD, each TD include some TRBs */
+	if (priv_ep->type == USB_ENDPOINT_XFER_ISOC)
+		num_trb = priv_ep->interval * num_trb_req;
+	else
+		num_trb = num_trb_req;
+
+	priv_req = to_cdns3_request(request);
+	address = priv_ep->endpoint.desc->bEndpointAddress;
+
+	priv_ep->flags |= EP_PENDING_REQUEST;
+
+	/* must allocate buffer aligned to 8 */
+	if (priv_req->flags & REQUEST_UNALIGNED)
+		trb_dma = priv_req->aligned_buf->dma;
+	else
+		trb_dma = request->dma;
+
+	trb = priv_ep->trb_pool + priv_ep->enqueue;
+	priv_req->start_trb = priv_ep->enqueue;
+	priv_req->trb = trb;
+
+	cdns3_select_ep(priv_ep->cdns3_dev, address);
+
+	/* prepare ring */
+	if ((priv_ep->enqueue + num_trb)  >= (priv_ep->num_trbs - 1)) {
+		int doorbell, dma_index;
+		u32 ch_bit = 0;
+
+		doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
+		dma_index = cdns3_get_dma_pos(priv_dev, priv_ep);
+
+		/* Driver can't update LINK TRB if it is current processed. */
+		if (doorbell && dma_index == priv_ep->num_trbs - 1) {
+			priv_ep->flags |= EP_DEFERRED_DRDY;
+			return -ENOBUFS;
+		}
+
+		/*updating C bt in  Link TRB before starting DMA*/
+		link_trb = priv_ep->trb_pool + (priv_ep->num_trbs - 1);
+		/*
+		 * For TRs size equal 2 enabling TRB_CHAIN for epXin causes
+		 * that DMA stuck at the LINK TRB.
+		 * On the other hand, removing TRB_CHAIN for longer TRs for
+		 * epXout cause that DMA stuck after handling LINK TRB.
+		 * To eliminate this strange behavioral driver set TRB_CHAIN
+		 * bit only for TR size > 2.
+		 */
+		if (priv_ep->type == USB_ENDPOINT_XFER_ISOC ||
+		    TRBS_PER_SEGMENT > 2)
+			ch_bit = TRB_CHAIN;
+
+		link_trb->control = cpu_to_le32(((priv_ep->pcs) ? TRB_CYCLE : 0) |
+				    TRB_TYPE(TRB_LINK) | TRB_TOGGLE | ch_bit);
+
+		if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) {
+			/*
+			 * ISO require LINK TRB must be first one of TD.
+			 * Fill LINK TRBs for left trb space to simply software process logic.
+			 */
+			while (priv_ep->enqueue) {
+				*trb = *link_trb;
+				trace_cdns3_prepare_trb(priv_ep, trb);
+
+				cdns3_ep_inc_enq(priv_ep);
+				trb = priv_ep->trb_pool + priv_ep->enqueue;
+				priv_req->trb = trb;
+			}
+		}
+	}
+
+	if (num_trb > priv_ep->free_trbs) {
+		priv_ep->flags |= EP_RING_FULL;
+		return -ENOBUFS;
+	}
+
+	if (priv_dev->dev_ver <= DEV_VER_V2)
+		togle_pcs = cdns3_wa1_update_guard(priv_ep, trb);
+
+	/* set incorrect Cycle Bit for first trb*/
+	control = priv_ep->pcs ? 0 : TRB_CYCLE;
+	trb->length = 0;
+	if (priv_dev->dev_ver >= DEV_VER_V2) {
+		u16 td_size;
+
+		td_size = DIV_ROUND_UP(request->length,
+				       priv_ep->endpoint.maxpacket);
+		if (priv_dev->gadget.speed == USB_SPEED_SUPER)
+			trb->length = cpu_to_le32(TRB_TDL_SS_SIZE(td_size));
+		else
+			control |= TRB_TDL_HS_SIZE(td_size);
+	}
+
+	do {
+		u32 length;
+
+		if (!(sg_iter % num_trb_req) && sg_supported)
+			s = request->sg;
+
+		/* fill TRB */
+		control |= TRB_TYPE(TRB_NORMAL);
+		if (sg_supported) {
+			trb->buffer = cpu_to_le32(TRB_BUFFER(sg_dma_address(s)));
+			length = sg_dma_len(s);
+		} else {
+			trb->buffer = cpu_to_le32(TRB_BUFFER(trb_dma));
+			length = request->length;
+		}
+
+		if (priv_ep->flags & EP_TDLCHK_EN)
+			total_tdl += DIV_ROUND_UP(length,
+					       priv_ep->endpoint.maxpacket);
+
+		trb_burst = priv_ep->trb_burst_size;
+
+		/*
+		 * Supposed DMA cross 4k bounder problem should be fixed at DEV_VER_V2, but still
+		 * met problem when do ISO transfer if sg enabled.
+		 *
+		 * Data pattern likes below when sg enabled, package size is 1k and mult is 2
+		 *       [UVC Header(8B) ] [data(3k - 8)] ...
+		 *
+		 * The received data at offset 0xd000 will get 0xc000 data, len 0x70. Error happen
+		 * as below pattern:
+		 *	0xd000: wrong
+		 *	0xe000: wrong
+		 *	0xf000: correct
+		 *	0x10000: wrong
+		 *	0x11000: wrong
+		 *	0x12000: correct
+		 *	...
+		 *
+		 * But it is still unclear about why error have not happen below 0xd000, it should
+		 * cross 4k bounder. But anyway, the below code can fix this problem.
+		 *
+		 * To avoid DMA cross 4k bounder at ISO transfer, reduce burst len according to 16.
+		 */
+		if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && priv_dev->dev_ver <= DEV_VER_V2)
+			if (ALIGN_DOWN(trb->buffer, SZ_4K) !=
+			    ALIGN_DOWN(trb->buffer + length, SZ_4K))
+				trb_burst = 16;
+
+		trb->length |= cpu_to_le32(TRB_BURST_LEN(trb_burst) |
+					TRB_LEN(length));
+		pcs = priv_ep->pcs ? TRB_CYCLE : 0;
+
+		/*
+		 * first trb should be prepared as last to avoid processing
+		 *  transfer to early
+		 */
+		if (sg_iter != 0)
+			control |= pcs;
+
+		if (priv_ep->type == USB_ENDPOINT_XFER_ISOC  && !priv_ep->dir) {
+			control |= TRB_IOC | TRB_ISP;
+		} else {
+			/* for last element in TD or in SG list */
+			if (sg_iter == (num_trb - 1) && sg_iter != 0)
+				control |= pcs | TRB_IOC | TRB_ISP;
+		}
+
+		if (sg_iter)
+			trb->control = cpu_to_le32(control);
+		else
+			priv_req->trb->control = cpu_to_le32(control);
+
+		if (sg_supported) {
+			trb->control |= cpu_to_le32(TRB_ISP);
+			/* Don't set chain bit for last TRB */
+			if ((sg_iter % num_trb_req) < num_trb_req - 1)
+				trb->control |= cpu_to_le32(TRB_CHAIN);
+
+			s = sg_next(s);
+		}
+
+		control = 0;
+		++sg_iter;
+		priv_req->end_trb = priv_ep->enqueue;
+		cdns3_ep_inc_enq(priv_ep);
+		trb = priv_ep->trb_pool + priv_ep->enqueue;
+		trb->length = 0;
+	} while (sg_iter < num_trb);
+
+	trb = priv_req->trb;
+
+	priv_req->flags |= REQUEST_PENDING;
+	priv_req->num_of_trb = num_trb;
+
+	if (sg_iter == 1)
+		trb->control |= cpu_to_le32(TRB_IOC | TRB_ISP);
+
+	if (priv_dev->dev_ver < DEV_VER_V2 &&
+	    (priv_ep->flags & EP_TDLCHK_EN)) {
+		u16 tdl = total_tdl;
+		u16 old_tdl = EP_CMD_TDL_GET(readl(&priv_dev->regs->ep_cmd));
+
+		if (tdl > EP_CMD_TDL_MAX) {
+			tdl = EP_CMD_TDL_MAX;
+			priv_ep->pending_tdl = total_tdl - EP_CMD_TDL_MAX;
+		}
+
+		if (old_tdl < tdl) {
+			tdl -= old_tdl;
+			writel(EP_CMD_TDL_SET(tdl) | EP_CMD_STDL,
+			       &priv_dev->regs->ep_cmd);
+		}
+	}
+
+	/*
+	 * Memory barrier - cycle bit must be set before other filds in trb.
+	 */
+	wmb();
+
+	/* give the TD to the consumer*/
+	if (togle_pcs)
+		trb->control = trb->control ^ cpu_to_le32(1);
+
+	if (priv_dev->dev_ver <= DEV_VER_V2)
+		cdns3_wa1_tray_restore_cycle_bit(priv_dev, priv_ep);
+
+	if (num_trb > 1) {
+		int i = 0;
+
+		while (i < num_trb) {
+			trace_cdns3_prepare_trb(priv_ep, trb + i);
+			if (trb + i == link_trb) {
+				trb = priv_ep->trb_pool;
+				num_trb = num_trb - i;
+				i = 0;
+			} else {
+				i++;
+			}
+		}
+	} else {
+		trace_cdns3_prepare_trb(priv_ep, priv_req->trb);
+	}
+
+	/*
+	 * Memory barrier - Cycle Bit must be set before trb->length  and
+	 * trb->buffer fields.
+	 */
+	wmb();
+
+	/*
+	 * For DMULT mode we can set address to transfer ring only once after
+	 * enabling endpoint.
+	 */
+	if (priv_ep->flags & EP_UPDATE_EP_TRBADDR) {
+		/*
+		 * Until SW is not ready to handle the OUT transfer the ISO OUT
+		 * Endpoint should be disabled (EP_CFG.ENABLE = 0).
+		 * EP_CFG_ENABLE must be set before updating ep_traddr.
+		 */
+		if (priv_ep->type == USB_ENDPOINT_XFER_ISOC  && !priv_ep->dir &&
+		    !(priv_ep->flags & EP_QUIRK_ISO_OUT_EN)) {
+			priv_ep->flags |= EP_QUIRK_ISO_OUT_EN;
+			cdns3_set_register_bit(&priv_dev->regs->ep_cfg,
+					       EP_CFG_ENABLE);
+		}
+
+		writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma +
+					priv_req->start_trb * TRB_SIZE),
+					&priv_dev->regs->ep_traddr);
+
+		priv_ep->flags &= ~EP_UPDATE_EP_TRBADDR;
+	}
+
+	if (!priv_ep->wa1_set && !(priv_ep->flags & EP_STALLED)) {
+		trace_cdns3_ring(priv_ep);
+		/*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/
+		writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts);
+		writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
+		cdns3_rearm_drdy_if_needed(priv_ep);
+		trace_cdns3_doorbell_epx(priv_ep->name,
+					 readl(&priv_dev->regs->ep_traddr));
+	}
+
+	/* WORKAROUND for transition to L0 */
+	__cdns3_gadget_wakeup(priv_dev);
+
+	return 0;
+}
+
+void cdns3_set_hw_configuration(struct cdns3_device *priv_dev)
+{
+	struct cdns3_endpoint *priv_ep;
+	struct usb_ep *ep;
+
+	if (priv_dev->hw_configured_flag)
+		return;
+
+	writel(USB_CONF_CFGSET, &priv_dev->regs->usb_conf);
+
+	cdns3_set_register_bit(&priv_dev->regs->usb_conf,
+			       USB_CONF_U1EN | USB_CONF_U2EN);
+
+	priv_dev->hw_configured_flag = 1;
+
+	list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
+		if (ep->enabled) {
+			priv_ep = ep_to_cdns3_ep(ep);
+			cdns3_start_all_request(priv_dev, priv_ep);
+		}
+	}
+
+	cdns3_allow_enable_l1(priv_dev, 1);
+}
+
+/**
+ * cdns3_trb_handled - check whether trb has been handled by DMA
+ *
+ * @priv_ep: extended endpoint object.
+ * @priv_req: request object for checking
+ *
+ * Endpoint must be selected before invoking this function.
+ *
+ * Returns false if request has not been handled by DMA, else returns true.
+ *
+ * SR - start ring
+ * ER -  end ring
+ * DQ = priv_ep->dequeue - dequeue position
+ * EQ = priv_ep->enqueue -  enqueue position
+ * ST = priv_req->start_trb - index of first TRB in transfer ring
+ * ET = priv_req->end_trb - index of last TRB in transfer ring
+ * CI = current_index - index of processed TRB by DMA.
+ *
+ * As first step, we check if the TRB between the ST and ET.
+ * Then, we check if cycle bit for index priv_ep->dequeue
+ * is correct.
+ *
+ * some rules:
+ * 1. priv_ep->dequeue never equals to current_index.
+ * 2  priv_ep->enqueue never exceed priv_ep->dequeue
+ * 3. exception: priv_ep->enqueue == priv_ep->dequeue
+ *    and priv_ep->free_trbs is zero.
+ *    This case indicate that TR is full.
+ *
+ * At below two cases, the request have been handled.
+ * Case 1 - priv_ep->dequeue < current_index
+ *      SR ... EQ ... DQ ... CI ... ER
+ *      SR ... DQ ... CI ... EQ ... ER
+ *
+ * Case 2 - priv_ep->dequeue > current_index
+ * This situation takes place when CI go through the LINK TRB at the end of
+ * transfer ring.
+ *      SR ... CI ... EQ ... DQ ... ER
+ */
+static bool cdns3_trb_handled(struct cdns3_endpoint *priv_ep,
+				  struct cdns3_request *priv_req)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	struct cdns3_trb *trb;
+	int current_index = 0;
+	int handled = 0;
+	int doorbell;
+
+	current_index = cdns3_get_dma_pos(priv_dev, priv_ep);
+	doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
+
+	/* current trb doesn't belong to this request */
+	if (priv_req->start_trb < priv_req->end_trb) {
+		if (priv_ep->dequeue > priv_req->end_trb)
+			goto finish;
+
+		if (priv_ep->dequeue < priv_req->start_trb)
+			goto finish;
+	}
+
+	if ((priv_req->start_trb > priv_req->end_trb) &&
+		(priv_ep->dequeue > priv_req->end_trb) &&
+		(priv_ep->dequeue < priv_req->start_trb))
+		goto finish;
+
+	if ((priv_req->start_trb == priv_req->end_trb) &&
+		(priv_ep->dequeue != priv_req->end_trb))
+		goto finish;
+
+	trb = &priv_ep->trb_pool[priv_ep->dequeue];
+
+	if ((le32_to_cpu(trb->control) & TRB_CYCLE) != priv_ep->ccs)
+		goto finish;
+
+	if (doorbell == 1 && current_index == priv_ep->dequeue)
+		goto finish;
+
+	/* The corner case for TRBS_PER_SEGMENT equal 2). */
+	if (TRBS_PER_SEGMENT == 2 && priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
+		handled = 1;
+		goto finish;
+	}
+
+	if (priv_ep->enqueue == priv_ep->dequeue &&
+	    priv_ep->free_trbs == 0) {
+		handled = 1;
+	} else if (priv_ep->dequeue < current_index) {
+		if ((current_index == (priv_ep->num_trbs - 1)) &&
+		    !priv_ep->dequeue)
+			goto finish;
+
+		handled = 1;
+	} else if (priv_ep->dequeue  > current_index) {
+			handled = 1;
+	}
+
+finish:
+	trace_cdns3_request_handled(priv_req, current_index, handled);
+
+	return handled;
+}
+
+static void cdns3_transfer_completed(struct cdns3_device *priv_dev,
+				     struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_request *priv_req;
+	struct usb_request *request;
+	struct cdns3_trb *trb;
+	bool request_handled = false;
+	bool transfer_end = false;
+
+	while (!list_empty(&priv_ep->pending_req_list)) {
+		request = cdns3_next_request(&priv_ep->pending_req_list);
+		priv_req = to_cdns3_request(request);
+
+		trb = priv_ep->trb_pool + priv_ep->dequeue;
+
+		/* The TRB was changed as link TRB, and the request was handled at ep_dequeue */
+		while (TRB_FIELD_TO_TYPE(le32_to_cpu(trb->control)) == TRB_LINK) {
+
+			/* ISO ep_traddr may stop at LINK TRB */
+			if (priv_ep->dequeue == cdns3_get_dma_pos(priv_dev, priv_ep) &&
+			    priv_ep->type == USB_ENDPOINT_XFER_ISOC)
+				break;
+
+			trace_cdns3_complete_trb(priv_ep, trb);
+			cdns3_ep_inc_deq(priv_ep);
+			trb = priv_ep->trb_pool + priv_ep->dequeue;
+		}
+
+		if (!request->stream_id) {
+			/* Re-select endpoint. It could be changed by other CPU
+			 * during handling usb_gadget_giveback_request.
+			 */
+			cdns3_select_ep(priv_dev, priv_ep->endpoint.address);
+
+			while (cdns3_trb_handled(priv_ep, priv_req)) {
+				priv_req->finished_trb++;
+				if (priv_req->finished_trb >= priv_req->num_of_trb)
+					request_handled = true;
+
+				trb = priv_ep->trb_pool + priv_ep->dequeue;
+				trace_cdns3_complete_trb(priv_ep, trb);
+
+				if (!transfer_end)
+					request->actual +=
+						TRB_LEN(le32_to_cpu(trb->length));
+
+				if (priv_req->num_of_trb > 1 &&
+					le32_to_cpu(trb->control) & TRB_SMM &&
+					le32_to_cpu(trb->control) & TRB_CHAIN)
+					transfer_end = true;
+
+				cdns3_ep_inc_deq(priv_ep);
+			}
+
+			if (request_handled) {
+				/* TRBs are duplicated by priv_ep->interval time for ISO IN */
+				if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && priv_ep->dir)
+					request->actual /= priv_ep->interval;
+
+				cdns3_gadget_giveback(priv_ep, priv_req, 0);
+				request_handled = false;
+				transfer_end = false;
+			} else {
+				goto prepare_next_td;
+			}
+
+			if (priv_ep->type != USB_ENDPOINT_XFER_ISOC &&
+			    TRBS_PER_SEGMENT == 2)
+				break;
+		} else {
+			/* Re-select endpoint. It could be changed by other CPU
+			 * during handling usb_gadget_giveback_request.
+			 */
+			cdns3_select_ep(priv_dev, priv_ep->endpoint.address);
+
+			trb = priv_ep->trb_pool;
+			trace_cdns3_complete_trb(priv_ep, trb);
+
+			if (trb != priv_req->trb)
+				dev_warn(priv_dev->dev,
+					 "request_trb=0x%p, queue_trb=0x%p\n",
+					 priv_req->trb, trb);
+
+			request->actual += TRB_LEN(le32_to_cpu(trb->length));
+
+			if (!request->num_sgs ||
+			    (request->num_sgs == (priv_ep->stream_sg_idx + 1))) {
+				priv_ep->stream_sg_idx = 0;
+				cdns3_gadget_giveback(priv_ep, priv_req, 0);
+			} else {
+				priv_ep->stream_sg_idx++;
+				cdns3_ep_run_stream_transfer(priv_ep, request);
+			}
+			break;
+		}
+	}
+	priv_ep->flags &= ~EP_PENDING_REQUEST;
+
+prepare_next_td:
+	if (!(priv_ep->flags & EP_STALLED) &&
+	    !(priv_ep->flags & EP_STALL_PENDING))
+		cdns3_start_all_request(priv_dev, priv_ep);
+}
+
+void cdns3_rearm_transfer(struct cdns3_endpoint *priv_ep, u8 rearm)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+	cdns3_wa1_restore_cycle_bit(priv_ep);
+
+	if (rearm) {
+		trace_cdns3_ring(priv_ep);
+
+		/* Cycle Bit must be updated before arming DMA. */
+		wmb();
+		writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
+
+		__cdns3_gadget_wakeup(priv_dev);
+
+		trace_cdns3_doorbell_epx(priv_ep->name,
+					 readl(&priv_dev->regs->ep_traddr));
+	}
+}
+
+static void cdns3_reprogram_tdl(struct cdns3_endpoint *priv_ep)
+{
+	u16 tdl = priv_ep->pending_tdl;
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+	if (tdl > EP_CMD_TDL_MAX) {
+		tdl = EP_CMD_TDL_MAX;
+		priv_ep->pending_tdl -= EP_CMD_TDL_MAX;
+	} else {
+		priv_ep->pending_tdl = 0;
+	}
+
+	writel(EP_CMD_TDL_SET(tdl) | EP_CMD_STDL, &priv_dev->regs->ep_cmd);
+}
+
+/**
+ * cdns3_check_ep_interrupt_proceed - Processes interrupt related to endpoint
+ * @priv_ep: endpoint object
+ *
+ * Returns 0
+ */
+static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	u32 ep_sts_reg;
+	struct usb_request *deferred_request;
+	struct usb_request *pending_request;
+	u32 tdl = 0;
+
+	cdns3_select_ep(priv_dev, priv_ep->endpoint.address);
+
+	trace_cdns3_epx_irq(priv_dev, priv_ep);
+
+	ep_sts_reg = readl(&priv_dev->regs->ep_sts);
+	writel(ep_sts_reg, &priv_dev->regs->ep_sts);
+
+	if ((ep_sts_reg & EP_STS_PRIME) && priv_ep->use_streams) {
+		bool dbusy = !!(ep_sts_reg & EP_STS_DBUSY);
+
+		tdl = cdns3_get_tdl(priv_dev);
+
+		/*
+		 * Continue the previous transfer:
+		 * There is some racing between ERDY and PRIME. The device send
+		 * ERDY and almost in the same time Host send PRIME. It cause
+		 * that host ignore the ERDY packet and driver has to send it
+		 * again.
+		 */
+		if (tdl && (dbusy || !EP_STS_BUFFEMPTY(ep_sts_reg) ||
+		    EP_STS_HOSTPP(ep_sts_reg))) {
+			writel(EP_CMD_ERDY |
+			       EP_CMD_ERDY_SID(priv_ep->last_stream_id),
+			       &priv_dev->regs->ep_cmd);
+			ep_sts_reg &= ~(EP_STS_MD_EXIT | EP_STS_IOC);
+		} else {
+			priv_ep->prime_flag = true;
+
+			pending_request = cdns3_next_request(&priv_ep->pending_req_list);
+			deferred_request = cdns3_next_request(&priv_ep->deferred_req_list);
+
+			if (deferred_request && !pending_request) {
+				cdns3_start_all_request(priv_dev, priv_ep);
+			}
+		}
+	}
+
+	if (ep_sts_reg & EP_STS_TRBERR) {
+		if (priv_ep->flags & EP_STALL_PENDING &&
+		    !(ep_sts_reg & EP_STS_DESCMIS &&
+		    priv_dev->dev_ver < DEV_VER_V2)) {
+			cdns3_ep_stall_flush(priv_ep);
+		}
+
+		/*
+		 * For isochronous transfer driver completes request on
+		 * IOC or on TRBERR. IOC appears only when device receive
+		 * OUT data packet. If host disable stream or lost some packet
+		 * then the only way to finish all queued transfer is to do it
+		 * on TRBERR event.
+		 */
+		if (priv_ep->type == USB_ENDPOINT_XFER_ISOC &&
+		    !priv_ep->wa1_set) {
+			if (!priv_ep->dir) {
+				u32 ep_cfg = readl(&priv_dev->regs->ep_cfg);
+
+				ep_cfg &= ~EP_CFG_ENABLE;
+				writel(ep_cfg, &priv_dev->regs->ep_cfg);
+				priv_ep->flags &= ~EP_QUIRK_ISO_OUT_EN;
+				priv_ep->flags |= EP_UPDATE_EP_TRBADDR;
+			}
+			cdns3_transfer_completed(priv_dev, priv_ep);
+		} else if (!(priv_ep->flags & EP_STALLED) &&
+			  !(priv_ep->flags & EP_STALL_PENDING)) {
+			if (priv_ep->flags & EP_DEFERRED_DRDY) {
+				priv_ep->flags &= ~EP_DEFERRED_DRDY;
+				cdns3_start_all_request(priv_dev, priv_ep);
+			} else {
+				cdns3_rearm_transfer(priv_ep,
+						     priv_ep->wa1_set);
+			}
+		}
+	}
+
+	if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP) ||
+	    (ep_sts_reg & EP_STS_IOT)) {
+		if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) {
+			if (ep_sts_reg & EP_STS_ISP)
+				priv_ep->flags |= EP_QUIRK_END_TRANSFER;
+			else
+				priv_ep->flags &= ~EP_QUIRK_END_TRANSFER;
+		}
+
+		if (!priv_ep->use_streams) {
+			if ((ep_sts_reg & EP_STS_IOC) ||
+			    (ep_sts_reg & EP_STS_ISP)) {
+				cdns3_transfer_completed(priv_dev, priv_ep);
+			} else if ((priv_ep->flags & EP_TDLCHK_EN) &
+				   priv_ep->pending_tdl) {
+				/* handle IOT with pending tdl */
+				cdns3_reprogram_tdl(priv_ep);
+			}
+		} else if (priv_ep->dir == USB_DIR_OUT) {
+			priv_ep->ep_sts_pending |= ep_sts_reg;
+		} else if (ep_sts_reg & EP_STS_IOT) {
+			cdns3_transfer_completed(priv_dev, priv_ep);
+		}
+	}
+
+	/*
+	 * MD_EXIT interrupt sets when stream capable endpoint exits
+	 * from MOVE DATA state of Bulk IN/OUT stream protocol state machine
+	 */
+	if (priv_ep->dir == USB_DIR_OUT && (ep_sts_reg & EP_STS_MD_EXIT) &&
+	    (priv_ep->ep_sts_pending & EP_STS_IOT) && priv_ep->use_streams) {
+		priv_ep->ep_sts_pending = 0;
+		cdns3_transfer_completed(priv_dev, priv_ep);
+	}
+
+	/*
+	 * WA2: this condition should only be meet when
+	 * priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET or
+	 * priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN.
+	 * In other cases this interrupt will be disabled.
+	 */
+	if (ep_sts_reg & EP_STS_DESCMIS && priv_dev->dev_ver < DEV_VER_V2 &&
+	    !(priv_ep->flags & EP_STALLED))
+		cdns3_wa2_descmissing_packet(priv_ep);
+
+	return 0;
+}
+
+static void cdns3_disconnect_gadget(struct cdns3_device *priv_dev)
+{
+	if (priv_dev->gadget_driver && priv_dev->gadget_driver->disconnect)
+		priv_dev->gadget_driver->disconnect(&priv_dev->gadget);
+}
+
+/**
+ * cdns3_check_usb_interrupt_proceed - Processes interrupt related to device
+ * @priv_dev: extended gadget object
+ * @usb_ists: bitmap representation of device's reported interrupts
+ * (usb_ists register value)
+ */
+static void cdns3_check_usb_interrupt_proceed(struct cdns3_device *priv_dev,
+					      u32 usb_ists)
+__must_hold(&priv_dev->lock)
+{
+	int speed = 0;
+
+	trace_cdns3_usb_irq(priv_dev, usb_ists);
+	if (usb_ists & USB_ISTS_L1ENTI) {
+		/*
+		 * WORKAROUND: CDNS3 controller has issue with hardware resuming
+		 * from L1. To fix it, if any DMA transfer is pending driver
+		 * must starts driving resume signal immediately.
+		 */
+		if (readl(&priv_dev->regs->drbl))
+			__cdns3_gadget_wakeup(priv_dev);
+	}
+
+	/* Connection detected */
+	if (usb_ists & (USB_ISTS_CON2I | USB_ISTS_CONI)) {
+		speed = cdns3_get_speed(priv_dev);
+		priv_dev->gadget.speed = speed;
+		usb_gadget_set_state(&priv_dev->gadget, USB_STATE_POWERED);
+		cdns3_ep0_config(priv_dev);
+	}
+
+	/* Disconnection detected */
+	if (usb_ists & (USB_ISTS_DIS2I | USB_ISTS_DISI)) {
+		spin_unlock(&priv_dev->lock);
+		cdns3_disconnect_gadget(priv_dev);
+		spin_lock(&priv_dev->lock);
+		priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
+		usb_gadget_set_state(&priv_dev->gadget, USB_STATE_NOTATTACHED);
+		cdns3_hw_reset_eps_config(priv_dev);
+	}
+
+	if (usb_ists & (USB_ISTS_L2ENTI | USB_ISTS_U3ENTI)) {
+		if (priv_dev->gadget_driver &&
+		    priv_dev->gadget_driver->suspend) {
+			spin_unlock(&priv_dev->lock);
+			priv_dev->gadget_driver->suspend(&priv_dev->gadget);
+			spin_lock(&priv_dev->lock);
+		}
+	}
+
+	if (usb_ists & (USB_ISTS_L2EXTI | USB_ISTS_U3EXTI)) {
+		if (priv_dev->gadget_driver &&
+		    priv_dev->gadget_driver->resume) {
+			spin_unlock(&priv_dev->lock);
+			priv_dev->gadget_driver->resume(&priv_dev->gadget);
+			spin_lock(&priv_dev->lock);
+		}
+	}
+
+	/* reset*/
+	if (usb_ists & (USB_ISTS_UWRESI | USB_ISTS_UHRESI | USB_ISTS_U2RESI)) {
+		if (priv_dev->gadget_driver) {
+			spin_unlock(&priv_dev->lock);
+			usb_gadget_udc_reset(&priv_dev->gadget,
+					     priv_dev->gadget_driver);
+			spin_lock(&priv_dev->lock);
+
+			/*read again to check the actual speed*/
+			speed = cdns3_get_speed(priv_dev);
+			priv_dev->gadget.speed = speed;
+			cdns3_hw_reset_eps_config(priv_dev);
+			cdns3_ep0_config(priv_dev);
+		}
+	}
+}
+
+/**
+ * cdns3_device_irq_handler - interrupt handler for device part of controller
+ *
+ * @irq: irq number for cdns3 core device
+ * @data: structure of cdns3
+ *
+ * Returns IRQ_HANDLED or IRQ_NONE
+ */
+static irqreturn_t cdns3_device_irq_handler(int irq, void *data)
+{
+	struct cdns3_device *priv_dev = data;
+	struct cdns *cdns = dev_get_drvdata(priv_dev->dev);
+	irqreturn_t ret = IRQ_NONE;
+	u32 reg;
+
+	if (cdns->in_lpm)
+		return ret;
+
+	/* check USB device interrupt */
+	reg = readl(&priv_dev->regs->usb_ists);
+	if (reg) {
+		/* After masking interrupts the new interrupts won't be
+		 * reported in usb_ists/ep_ists. In order to not lose some
+		 * of them driver disables only detected interrupts.
+		 * They will be enabled ASAP after clearing source of
+		 * interrupt. This an unusual behavior only applies to
+		 * usb_ists register.
+		 */
+		reg = ~reg & readl(&priv_dev->regs->usb_ien);
+		/* mask deferred interrupt. */
+		writel(reg, &priv_dev->regs->usb_ien);
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	/* check endpoint interrupt */
+	reg = readl(&priv_dev->regs->ep_ists);
+	if (reg) {
+		writel(0, &priv_dev->regs->ep_ien);
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	return ret;
+}
+
+/**
+ * cdns3_device_thread_irq_handler - interrupt handler for device part
+ * of controller
+ *
+ * @irq: irq number for cdns3 core device
+ * @data: structure of cdns3
+ *
+ * Returns IRQ_HANDLED or IRQ_NONE
+ */
+static irqreturn_t cdns3_device_thread_irq_handler(int irq, void *data)
+{
+	struct cdns3_device *priv_dev = data;
+	irqreturn_t ret = IRQ_NONE;
+	unsigned long flags;
+	unsigned int bit;
+	unsigned long reg;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+
+	reg = readl(&priv_dev->regs->usb_ists);
+	if (reg) {
+		writel(reg, &priv_dev->regs->usb_ists);
+		writel(USB_IEN_INIT, &priv_dev->regs->usb_ien);
+		cdns3_check_usb_interrupt_proceed(priv_dev, reg);
+		ret = IRQ_HANDLED;
+	}
+
+	reg = readl(&priv_dev->regs->ep_ists);
+
+	/* handle default endpoint OUT */
+	if (reg & EP_ISTS_EP_OUT0) {
+		cdns3_check_ep0_interrupt_proceed(priv_dev, USB_DIR_OUT);
+		ret = IRQ_HANDLED;
+	}
+
+	/* handle default endpoint IN */
+	if (reg & EP_ISTS_EP_IN0) {
+		cdns3_check_ep0_interrupt_proceed(priv_dev, USB_DIR_IN);
+		ret = IRQ_HANDLED;
+	}
+
+	/* check if interrupt from non default endpoint, if no exit */
+	reg &= ~(EP_ISTS_EP_OUT0 | EP_ISTS_EP_IN0);
+	if (!reg)
+		goto irqend;
+
+	for_each_set_bit(bit, &reg,
+			 sizeof(u32) * BITS_PER_BYTE) {
+		cdns3_check_ep_interrupt_proceed(priv_dev->eps[bit]);
+		ret = IRQ_HANDLED;
+	}
+
+	if (priv_dev->dev_ver < DEV_VER_V2 && priv_dev->using_streams)
+		cdns3_wa2_check_outq_status(priv_dev);
+
+irqend:
+	writel(~0, &priv_dev->regs->ep_ien);
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+	return ret;
+}
+
+/**
+ * cdns3_ep_onchip_buffer_reserve - Try to reserve onchip buf for EP
+ *
+ * The real reservation will occur during write to EP_CFG register,
+ * this function is used to check if the 'size' reservation is allowed.
+ *
+ * @priv_dev: extended gadget object
+ * @size: the size (KB) for EP would like to allocate
+ * @is_in: endpoint direction
+ *
+ * Return 0 if the required size can met or negative value on failure
+ */
+static int cdns3_ep_onchip_buffer_reserve(struct cdns3_device *priv_dev,
+					  int size, int is_in)
+{
+	int remained;
+
+	/* 2KB are reserved for EP0*/
+	remained = priv_dev->onchip_buffers - priv_dev->onchip_used_size - 2;
+
+	if (is_in) {
+		if (remained < size)
+			return -EPERM;
+
+		priv_dev->onchip_used_size += size;
+	} else {
+		int required;
+
+		/**
+		 *  ALL OUT EPs are shared the same chunk onchip memory, so
+		 * driver checks if it already has assigned enough buffers
+		 */
+		if (priv_dev->out_mem_is_allocated >= size)
+			return 0;
+
+		required = size - priv_dev->out_mem_is_allocated;
+
+		if (required > remained)
+			return -EPERM;
+
+		priv_dev->out_mem_is_allocated += required;
+		priv_dev->onchip_used_size += required;
+	}
+
+	return 0;
+}
+
+static void cdns3_configure_dmult(struct cdns3_device *priv_dev,
+				  struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
+
+	/* For dev_ver > DEV_VER_V2 DMULT is configured per endpoint */
+	if (priv_dev->dev_ver <= DEV_VER_V2)
+		writel(USB_CONF_DMULT, &regs->usb_conf);
+
+	if (priv_dev->dev_ver == DEV_VER_V2)
+		writel(USB_CONF2_EN_TDL_TRB, &regs->usb_conf2);
+
+	if (priv_dev->dev_ver >= DEV_VER_V3 && priv_ep) {
+		u32 mask;
+
+		if (priv_ep->dir)
+			mask = BIT(priv_ep->num + 16);
+		else
+			mask = BIT(priv_ep->num);
+
+		if (priv_ep->type != USB_ENDPOINT_XFER_ISOC  && !priv_ep->dir) {
+			cdns3_set_register_bit(&regs->tdl_from_trb, mask);
+			cdns3_set_register_bit(&regs->tdl_beh, mask);
+			cdns3_set_register_bit(&regs->tdl_beh2, mask);
+			cdns3_set_register_bit(&regs->dma_adv_td, mask);
+		}
+
+		if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir)
+			cdns3_set_register_bit(&regs->tdl_from_trb, mask);
+
+		cdns3_set_register_bit(&regs->dtrans, mask);
+	}
+}
+
+/**
+ * cdns3_ep_config - Configure hardware endpoint
+ * @priv_ep: extended endpoint object
+ * @enable: set EP_CFG_ENABLE bit in ep_cfg register.
+ */
+int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable)
+{
+	bool is_iso_ep = (priv_ep->type == USB_ENDPOINT_XFER_ISOC);
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	u32 bEndpointAddress = priv_ep->num | priv_ep->dir;
+	u32 max_packet_size = priv_ep->wMaxPacketSize;
+	u8 maxburst = priv_ep->bMaxBurst;
+	u32 ep_cfg = 0;
+	u8 buffering;
+	int ret;
+
+	buffering = priv_dev->ep_buf_size - 1;
+
+	cdns3_configure_dmult(priv_dev, priv_ep);
+
+	switch (priv_ep->type) {
+	case USB_ENDPOINT_XFER_INT:
+		ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT);
+
+		if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
+			ep_cfg |= EP_CFG_TDL_CHK;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK);
+
+		if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
+			ep_cfg |= EP_CFG_TDL_CHK;
+		break;
+	default:
+		ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_ISOC);
+		buffering = (priv_ep->bMaxBurst + 1) * (priv_ep->mult + 1) - 1;
+	}
+
+	switch (priv_dev->gadget.speed) {
+	case USB_SPEED_FULL:
+		max_packet_size = is_iso_ep ? 1023 : 64;
+		break;
+	case USB_SPEED_HIGH:
+		max_packet_size = is_iso_ep ? 1024 : 512;
+		break;
+	case USB_SPEED_SUPER:
+		if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
+			max_packet_size = 1024;
+			maxburst = priv_dev->ep_buf_size - 1;
+		}
+		break;
+	default:
+		/* all other speed are not supported */
+		return -EINVAL;
+	}
+
+	if (max_packet_size == 1024)
+		priv_ep->trb_burst_size = 128;
+	else if (max_packet_size >= 512)
+		priv_ep->trb_burst_size = 64;
+	else
+		priv_ep->trb_burst_size = 16;
+
+	/*
+	 * In versions preceding DEV_VER_V2, for example, iMX8QM, there exit the bugs
+	 * in the DMA. These bugs occur when the trb_burst_size exceeds 16 and the
+	 * address is not aligned to 128 Bytes (which is a product of the 64-bit AXI
+	 * and AXI maximum burst length of 16 or 0xF+1, dma_axi_ctrl0[3:0]). This
+	 * results in data corruption when it crosses the 4K border. The corruption
+	 * specifically occurs from the position (4K - (address & 0x7F)) to 4K.
+	 *
+	 * So force trb_burst_size to 16 at such platform.
+	 */
+	if (priv_dev->dev_ver < DEV_VER_V2)
+		priv_ep->trb_burst_size = 16;
+
+	buffering = min_t(u8, buffering, EP_CFG_BUFFERING_MAX);
+	maxburst = min_t(u8, maxburst, EP_CFG_MAXBURST_MAX);
+
+	/* onchip buffer is only allocated before configuration */
+	if (!priv_dev->hw_configured_flag) {
+		ret = cdns3_ep_onchip_buffer_reserve(priv_dev, buffering + 1,
+						     !!priv_ep->dir);
+		if (ret) {
+			dev_err(priv_dev->dev, "onchip mem is full, ep is invalid\n");
+			return ret;
+		}
+	}
+
+	if (enable)
+		ep_cfg |= EP_CFG_ENABLE;
+
+	if (priv_ep->use_streams && priv_dev->gadget.speed >= USB_SPEED_SUPER) {
+		if (priv_dev->dev_ver >= DEV_VER_V3) {
+			u32 mask = BIT(priv_ep->num + (priv_ep->dir ? 16 : 0));
+
+			/*
+			 * Stream capable endpoints are handled by using ep_tdl
+			 * register. Other endpoints use TDL from TRB feature.
+			 */
+			cdns3_clear_register_bit(&priv_dev->regs->tdl_from_trb,
+						 mask);
+		}
+
+		/*  Enable Stream Bit TDL chk and SID chk */
+		ep_cfg |=  EP_CFG_STREAM_EN | EP_CFG_TDL_CHK | EP_CFG_SID_CHK;
+	}
+
+	ep_cfg |= EP_CFG_MAXPKTSIZE(max_packet_size) |
+		  EP_CFG_MULT(priv_ep->mult) |			/* must match EP setting */
+		  EP_CFG_BUFFERING(buffering) |
+		  EP_CFG_MAXBURST(maxburst);
+
+	cdns3_select_ep(priv_dev, bEndpointAddress);
+	writel(ep_cfg, &priv_dev->regs->ep_cfg);
+	priv_ep->flags |= EP_CONFIGURED;
+
+	dev_dbg(priv_dev->dev, "Configure %s: with val %08x\n",
+		priv_ep->name, ep_cfg);
+
+	return 0;
+}
+
+/* Find correct direction for HW endpoint according to description */
+static int cdns3_ep_dir_is_correct(struct usb_endpoint_descriptor *desc,
+				   struct cdns3_endpoint *priv_ep)
+{
+	return (priv_ep->endpoint.caps.dir_in && usb_endpoint_dir_in(desc)) ||
+	       (priv_ep->endpoint.caps.dir_out && usb_endpoint_dir_out(desc));
+}
+
+static struct
+cdns3_endpoint *cdns3_find_available_ep(struct cdns3_device *priv_dev,
+					struct usb_endpoint_descriptor *desc)
+{
+	struct usb_ep *ep;
+	struct cdns3_endpoint *priv_ep;
+
+	list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
+		unsigned long num;
+		int ret;
+		/* ep name pattern likes epXin or epXout */
+		char c[2] = {ep->name[2], '\0'};
+
+		ret = kstrtoul(c, 10, &num);
+		if (ret)
+			return ERR_PTR(ret);
+
+		priv_ep = ep_to_cdns3_ep(ep);
+		if (cdns3_ep_dir_is_correct(desc, priv_ep)) {
+			if (!(priv_ep->flags & EP_CLAIMED)) {
+				priv_ep->num  = num;
+				return priv_ep;
+			}
+		}
+	}
+
+	return ERR_PTR(-ENOENT);
+}
+
+/*
+ *  Cadence IP has one limitation that all endpoints must be configured
+ * (Type & MaxPacketSize) before setting configuration through hardware
+ * register, it means we can't change endpoints configuration after
+ * set_configuration.
+ *
+ * This function set EP_CLAIMED flag which is added when the gadget driver
+ * uses usb_ep_autoconfig to configure specific endpoint;
+ * When the udc driver receives set_configurion request,
+ * it goes through all claimed endpoints, and configure all endpoints
+ * accordingly.
+ *
+ * At usb_ep_ops.enable/disable, we only enable and disable endpoint through
+ * ep_cfg register which can be changed after set_configuration, and do
+ * some software operation accordingly.
+ */
+static struct
+usb_ep *cdns3_gadget_match_ep(struct usb_gadget *gadget,
+			      struct usb_endpoint_descriptor *desc,
+			      struct usb_ss_ep_comp_descriptor *comp_desc)
+{
+	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+	struct cdns3_endpoint *priv_ep;
+	unsigned long flags;
+
+	priv_ep = cdns3_find_available_ep(priv_dev, desc);
+	if (IS_ERR(priv_ep)) {
+		dev_err(priv_dev->dev, "no available ep\n");
+		return NULL;
+	}
+
+	dev_dbg(priv_dev->dev, "match endpoint: %s\n", priv_ep->name);
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+	priv_ep->endpoint.desc = desc;
+	priv_ep->dir  = usb_endpoint_dir_in(desc) ? USB_DIR_IN : USB_DIR_OUT;
+	priv_ep->type = usb_endpoint_type(desc);
+	priv_ep->flags |= EP_CLAIMED;
+	priv_ep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0;
+	priv_ep->wMaxPacketSize =  usb_endpoint_maxp(desc);
+	priv_ep->mult = USB_EP_MAXP_MULT(priv_ep->wMaxPacketSize);
+	priv_ep->wMaxPacketSize &= USB_ENDPOINT_MAXP_MASK;
+	if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && comp_desc) {
+		priv_ep->mult =  USB_SS_MULT(comp_desc->bmAttributes) - 1;
+		priv_ep->bMaxBurst = comp_desc->bMaxBurst;
+	}
+
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+	return &priv_ep->endpoint;
+}
+
+/**
+ * cdns3_gadget_ep_alloc_request - Allocates request
+ * @ep: endpoint object associated with request
+ * @gfp_flags: gfp flags
+ *
+ * Returns allocated request address, NULL on allocation error
+ */
+struct usb_request *cdns3_gadget_ep_alloc_request(struct usb_ep *ep,
+						  gfp_t gfp_flags)
+{
+	struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+	struct cdns3_request *priv_req;
+
+	priv_req = kzalloc(sizeof(*priv_req), gfp_flags);
+	if (!priv_req)
+		return NULL;
+
+	priv_req->priv_ep = priv_ep;
+
+	trace_cdns3_alloc_request(priv_req);
+	return &priv_req->request;
+}
+
+/**
+ * cdns3_gadget_ep_free_request - Free memory occupied by request
+ * @ep: endpoint object associated with request
+ * @request: request to free memory
+ */
+void cdns3_gadget_ep_free_request(struct usb_ep *ep,
+				  struct usb_request *request)
+{
+	struct cdns3_request *priv_req = to_cdns3_request(request);
+
+	if (priv_req->aligned_buf)
+		priv_req->aligned_buf->in_use = 0;
+
+	trace_cdns3_free_request(priv_req);
+	kfree(priv_req);
+}
+
+/**
+ * cdns3_gadget_ep_enable - Enable endpoint
+ * @ep: endpoint object
+ * @desc: endpoint descriptor
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int cdns3_gadget_ep_enable(struct usb_ep *ep,
+				  const struct usb_endpoint_descriptor *desc)
+{
+	struct cdns3_endpoint *priv_ep;
+	struct cdns3_device *priv_dev;
+	const struct usb_ss_ep_comp_descriptor *comp_desc;
+	u32 reg = EP_STS_EN_TRBERREN;
+	u32 bEndpointAddress;
+	unsigned long flags;
+	int enable = 1;
+	int ret = 0;
+	int val;
+
+	if (!ep) {
+		pr_debug("usbss: ep not configured?\n");
+		return -EINVAL;
+	}
+
+	priv_ep = ep_to_cdns3_ep(ep);
+	priv_dev = priv_ep->cdns3_dev;
+	comp_desc = priv_ep->endpoint.comp_desc;
+
+	if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
+		dev_dbg(priv_dev->dev, "usbss: invalid parameters\n");
+		return -EINVAL;
+	}
+
+	if (!desc->wMaxPacketSize) {
+		dev_err(priv_dev->dev, "usbss: missing wMaxPacketSize\n");
+		return -EINVAL;
+	}
+
+	if (dev_WARN_ONCE(priv_dev->dev, priv_ep->flags & EP_ENABLED,
+			  "%s is already enabled\n", priv_ep->name))
+		return 0;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+
+	priv_ep->endpoint.desc = desc;
+	priv_ep->type = usb_endpoint_type(desc);
+	priv_ep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0;
+
+	if (priv_ep->interval > ISO_MAX_INTERVAL &&
+	    priv_ep->type == USB_ENDPOINT_XFER_ISOC) {
+		dev_err(priv_dev->dev, "Driver is limited to %d period\n",
+			ISO_MAX_INTERVAL);
+
+		ret =  -EINVAL;
+		goto exit;
+	}
+
+	bEndpointAddress = priv_ep->num | priv_ep->dir;
+	cdns3_select_ep(priv_dev, bEndpointAddress);
+
+	/*
+	 * For some versions of controller at some point during ISO OUT traffic
+	 * DMA reads Transfer Ring for the EP which has never got doorbell.
+	 * This issue was detected only on simulation, but to avoid this issue
+	 * driver add protection against it. To fix it driver enable ISO OUT
+	 * endpoint before setting DRBL. This special treatment of ISO OUT
+	 * endpoints are recommended by controller specification.
+	 */
+	if (priv_ep->type == USB_ENDPOINT_XFER_ISOC  && !priv_ep->dir)
+		enable = 0;
+
+	if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) {
+		/*
+		 * Enable stream support (SS mode) related interrupts
+		 * in EP_STS_EN Register
+		 */
+		if (priv_dev->gadget.speed >= USB_SPEED_SUPER) {
+			reg |= EP_STS_EN_IOTEN | EP_STS_EN_PRIMEEEN |
+				EP_STS_EN_SIDERREN | EP_STS_EN_MD_EXITEN |
+				EP_STS_EN_STREAMREN;
+			priv_ep->use_streams = true;
+			ret = cdns3_ep_config(priv_ep, enable);
+			priv_dev->using_streams |= true;
+		}
+	} else {
+		ret = cdns3_ep_config(priv_ep, enable);
+	}
+
+	if (ret)
+		goto exit;
+
+	ret = cdns3_allocate_trb_pool(priv_ep);
+	if (ret)
+		goto exit;
+
+	bEndpointAddress = priv_ep->num | priv_ep->dir;
+	cdns3_select_ep(priv_dev, bEndpointAddress);
+
+	trace_cdns3_gadget_ep_enable(priv_ep);
+
+	writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
+
+	ret = readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+					!(val & (EP_CMD_CSTALL | EP_CMD_EPRST)),
+					1, 1000);
+
+	if (unlikely(ret)) {
+		cdns3_free_trb_pool(priv_ep);
+		ret =  -EINVAL;
+		goto exit;
+	}
+
+	/* enable interrupt for selected endpoint */
+	cdns3_set_register_bit(&priv_dev->regs->ep_ien,
+			       BIT(cdns3_ep_addr_to_index(bEndpointAddress)));
+
+	if (priv_dev->dev_ver < DEV_VER_V2)
+		cdns3_wa2_enable_detection(priv_dev, priv_ep, reg);
+
+	writel(reg, &priv_dev->regs->ep_sts_en);
+
+	ep->desc = desc;
+	priv_ep->flags &= ~(EP_PENDING_REQUEST | EP_STALLED | EP_STALL_PENDING |
+			    EP_QUIRK_ISO_OUT_EN | EP_QUIRK_EXTRA_BUF_EN);
+	priv_ep->flags |= EP_ENABLED | EP_UPDATE_EP_TRBADDR;
+	priv_ep->wa1_set = 0;
+	priv_ep->enqueue = 0;
+	priv_ep->dequeue = 0;
+	reg = readl(&priv_dev->regs->ep_sts);
+	priv_ep->pcs = !!EP_STS_CCS(reg);
+	priv_ep->ccs = !!EP_STS_CCS(reg);
+	/* one TRB is reserved for link TRB used in DMULT mode*/
+	priv_ep->free_trbs = priv_ep->num_trbs - 1;
+exit:
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+	return ret;
+}
+
+/**
+ * cdns3_gadget_ep_disable - Disable endpoint
+ * @ep: endpoint object
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int cdns3_gadget_ep_disable(struct usb_ep *ep)
+{
+	struct cdns3_endpoint *priv_ep;
+	struct cdns3_request *priv_req;
+	struct cdns3_device *priv_dev;
+	struct usb_request *request;
+	unsigned long flags;
+	int ret = 0;
+	u32 ep_cfg;
+	int val;
+
+	if (!ep) {
+		pr_err("usbss: invalid parameters\n");
+		return -EINVAL;
+	}
+
+	priv_ep = ep_to_cdns3_ep(ep);
+	priv_dev = priv_ep->cdns3_dev;
+
+	if (dev_WARN_ONCE(priv_dev->dev, !(priv_ep->flags & EP_ENABLED),
+			  "%s is already disabled\n", priv_ep->name))
+		return 0;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+
+	trace_cdns3_gadget_ep_disable(priv_ep);
+
+	cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress);
+
+	ep_cfg = readl(&priv_dev->regs->ep_cfg);
+	ep_cfg &= ~EP_CFG_ENABLE;
+	writel(ep_cfg, &priv_dev->regs->ep_cfg);
+
+	/**
+	 * Driver needs some time before resetting endpoint.
+	 * It need waits for clearing DBUSY bit or for timeout expired.
+	 * 10us is enough time for controller to stop transfer.
+	 */
+	readl_poll_timeout_atomic(&priv_dev->regs->ep_sts, val,
+				  !(val & EP_STS_DBUSY), 1, 10);
+	writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
+
+	readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+				  !(val & (EP_CMD_CSTALL | EP_CMD_EPRST)),
+				  1, 1000);
+	if (unlikely(ret))
+		dev_err(priv_dev->dev, "Timeout: %s resetting failed.\n",
+			priv_ep->name);
+
+	while (!list_empty(&priv_ep->pending_req_list)) {
+		request = cdns3_next_request(&priv_ep->pending_req_list);
+
+		cdns3_gadget_giveback(priv_ep, to_cdns3_request(request),
+				      -ESHUTDOWN);
+	}
+
+	while (!list_empty(&priv_ep->wa2_descmiss_req_list)) {
+		priv_req = cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list);
+
+		kfree(priv_req->request.buf);
+		cdns3_gadget_ep_free_request(&priv_ep->endpoint,
+					     &priv_req->request);
+		list_del_init(&priv_req->list);
+		--priv_ep->wa2_counter;
+	}
+
+	while (!list_empty(&priv_ep->deferred_req_list)) {
+		request = cdns3_next_request(&priv_ep->deferred_req_list);
+
+		cdns3_gadget_giveback(priv_ep, to_cdns3_request(request),
+				      -ESHUTDOWN);
+	}
+
+	priv_ep->descmis_req = NULL;
+
+	ep->desc = NULL;
+	priv_ep->flags &= ~EP_ENABLED;
+	priv_ep->use_streams = false;
+
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+	return ret;
+}
+
+/**
+ * __cdns3_gadget_ep_queue - Transfer data on endpoint
+ * @ep: endpoint object
+ * @request: request object
+ * @gfp_flags: gfp flags
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int __cdns3_gadget_ep_queue(struct usb_ep *ep,
+				   struct usb_request *request,
+				   gfp_t gfp_flags)
+{
+	struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	struct cdns3_request *priv_req;
+	int ret = 0;
+
+	request->actual = 0;
+	request->status = -EINPROGRESS;
+	priv_req = to_cdns3_request(request);
+	trace_cdns3_ep_queue(priv_req);
+
+	if (priv_dev->dev_ver < DEV_VER_V2) {
+		ret = cdns3_wa2_gadget_ep_queue(priv_dev, priv_ep,
+						priv_req);
+
+		if (ret == EINPROGRESS)
+			return 0;
+	}
+
+	ret = cdns3_prepare_aligned_request_buf(priv_req);
+	if (ret < 0)
+		return ret;
+
+	ret = usb_gadget_map_request_by_dev(priv_dev->sysdev, request,
+					    usb_endpoint_dir_in(ep->desc));
+	if (ret)
+		return ret;
+
+	list_add_tail(&request->list, &priv_ep->deferred_req_list);
+
+	/*
+	 * For stream capable endpoint if prime irq flag is set then only start
+	 * request.
+	 * If hardware endpoint configuration has not been set yet then
+	 * just queue request in deferred list. Transfer will be started in
+	 * cdns3_set_hw_configuration.
+	 */
+	if (!request->stream_id) {
+		if (priv_dev->hw_configured_flag &&
+		    !(priv_ep->flags & EP_STALLED) &&
+		    !(priv_ep->flags & EP_STALL_PENDING))
+			cdns3_start_all_request(priv_dev, priv_ep);
+	} else {
+		if (priv_dev->hw_configured_flag && priv_ep->prime_flag)
+			cdns3_start_all_request(priv_dev, priv_ep);
+	}
+
+	return 0;
+}
+
+static int cdns3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
+				 gfp_t gfp_flags)
+{
+	struct usb_request *zlp_request;
+	struct cdns3_endpoint *priv_ep;
+	struct cdns3_device *priv_dev;
+	unsigned long flags;
+	int ret;
+
+	if (!request || !ep)
+		return -EINVAL;
+
+	priv_ep = ep_to_cdns3_ep(ep);
+	priv_dev = priv_ep->cdns3_dev;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+
+	ret = __cdns3_gadget_ep_queue(ep, request, gfp_flags);
+
+	if (ret == 0 && request->zero && request->length &&
+	    (request->length % ep->maxpacket == 0)) {
+		struct cdns3_request *priv_req;
+
+		zlp_request = cdns3_gadget_ep_alloc_request(ep, GFP_ATOMIC);
+		zlp_request->buf = priv_dev->zlp_buf;
+		zlp_request->length = 0;
+
+		priv_req = to_cdns3_request(zlp_request);
+		priv_req->flags |= REQUEST_ZLP;
+
+		dev_dbg(priv_dev->dev, "Queuing ZLP for endpoint: %s\n",
+			priv_ep->name);
+		ret = __cdns3_gadget_ep_queue(ep, zlp_request, gfp_flags);
+	}
+
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+	return ret;
+}
+
+/**
+ * cdns3_gadget_ep_dequeue - Remove request from transfer queue
+ * @ep: endpoint object associated with request
+ * @request: request object
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+int cdns3_gadget_ep_dequeue(struct usb_ep *ep,
+			    struct usb_request *request)
+{
+	struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+	struct cdns3_device *priv_dev;
+	struct usb_request *req, *req_temp;
+	struct cdns3_request *priv_req;
+	struct cdns3_trb *link_trb;
+	u8 req_on_hw_ring = 0;
+	unsigned long flags;
+	int ret = 0;
+	int val;
+
+	if (!ep || !request || !ep->desc)
+		return -EINVAL;
+
+	priv_dev = priv_ep->cdns3_dev;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+
+	priv_req = to_cdns3_request(request);
+
+	trace_cdns3_ep_dequeue(priv_req);
+
+	cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress);
+
+	list_for_each_entry_safe(req, req_temp, &priv_ep->pending_req_list,
+				 list) {
+		if (request == req) {
+			req_on_hw_ring = 1;
+			goto found;
+		}
+	}
+
+	list_for_each_entry_safe(req, req_temp, &priv_ep->deferred_req_list,
+				 list) {
+		if (request == req)
+			goto found;
+	}
+
+	goto not_found;
+
+found:
+	link_trb = priv_req->trb;
+
+	/* Update ring only if removed request is on pending_req_list list */
+	if (req_on_hw_ring && link_trb) {
+		/* Stop DMA */
+		writel(EP_CMD_DFLUSH, &priv_dev->regs->ep_cmd);
+
+		/* wait for DFLUSH cleared */
+		readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+					  !(val & EP_CMD_DFLUSH), 1, 1000);
+
+		link_trb->buffer = cpu_to_le32(TRB_BUFFER(priv_ep->trb_pool_dma +
+			((priv_req->end_trb + 1) * TRB_SIZE)));
+		link_trb->control = cpu_to_le32((le32_to_cpu(link_trb->control) & TRB_CYCLE) |
+				    TRB_TYPE(TRB_LINK) | TRB_CHAIN);
+
+		if (priv_ep->wa1_trb == priv_req->trb)
+			cdns3_wa1_restore_cycle_bit(priv_ep);
+	}
+
+	cdns3_gadget_giveback(priv_ep, priv_req, -ECONNRESET);
+
+	req = cdns3_next_request(&priv_ep->pending_req_list);
+	if (req)
+		cdns3_rearm_transfer(priv_ep, 1);
+
+not_found:
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+	return ret;
+}
+
+/**
+ * __cdns3_gadget_ep_set_halt - Sets stall on selected endpoint
+ * Should be called after acquiring spin_lock and selecting ep
+ * @priv_ep: endpoint object to set stall on.
+ */
+void __cdns3_gadget_ep_set_halt(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+	trace_cdns3_halt(priv_ep, 1, 0);
+
+	if (!(priv_ep->flags & EP_STALLED)) {
+		u32 ep_sts_reg = readl(&priv_dev->regs->ep_sts);
+
+		if (!(ep_sts_reg & EP_STS_DBUSY))
+			cdns3_ep_stall_flush(priv_ep);
+		else
+			priv_ep->flags |= EP_STALL_PENDING;
+	}
+}
+
+/**
+ * __cdns3_gadget_ep_clear_halt - Clears stall on selected endpoint
+ * Should be called after acquiring spin_lock and selecting ep
+ * @priv_ep: endpoint object to clear stall on
+ */
+int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	struct usb_request *request;
+	struct cdns3_request *priv_req;
+	struct cdns3_trb *trb = NULL;
+	struct cdns3_trb trb_tmp;
+	int ret;
+	int val;
+
+	trace_cdns3_halt(priv_ep, 0, 0);
+
+	request = cdns3_next_request(&priv_ep->pending_req_list);
+	if (request) {
+		priv_req = to_cdns3_request(request);
+		trb = priv_req->trb;
+		if (trb) {
+			trb_tmp = *trb;
+			trb->control = trb->control ^ cpu_to_le32(TRB_CYCLE);
+		}
+	}
+
+	writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
+
+	/* wait for EPRST cleared */
+	ret = readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+					!(val & EP_CMD_EPRST), 1, 100);
+	if (ret)
+		return -EINVAL;
+
+	priv_ep->flags &= ~(EP_STALLED | EP_STALL_PENDING);
+
+	if (request) {
+		if (trb)
+			*trb = trb_tmp;
+
+		cdns3_rearm_transfer(priv_ep, 1);
+	}
+
+	cdns3_start_all_request(priv_dev, priv_ep);
+	return ret;
+}
+
+/**
+ * cdns3_gadget_ep_set_halt - Sets/clears stall on selected endpoint
+ * @ep: endpoint object to set/clear stall on
+ * @value: 1 for set stall, 0 for clear stall
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+int cdns3_gadget_ep_set_halt(struct usb_ep *ep, int value)
+{
+	struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	unsigned long flags;
+	int ret = 0;
+
+	if (!(priv_ep->flags & EP_ENABLED))
+		return -EPERM;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+
+	cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress);
+
+	if (!value) {
+		priv_ep->flags &= ~EP_WEDGE;
+		ret = __cdns3_gadget_ep_clear_halt(priv_ep);
+	} else {
+		__cdns3_gadget_ep_set_halt(priv_ep);
+	}
+
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+	return ret;
+}
+
+extern const struct usb_ep_ops cdns3_gadget_ep0_ops;
+
+static const struct usb_ep_ops cdns3_gadget_ep_ops = {
+	.enable = cdns3_gadget_ep_enable,
+	.disable = cdns3_gadget_ep_disable,
+	.alloc_request = cdns3_gadget_ep_alloc_request,
+	.free_request = cdns3_gadget_ep_free_request,
+	.queue = cdns3_gadget_ep_queue,
+	.dequeue = cdns3_gadget_ep_dequeue,
+	.set_halt = cdns3_gadget_ep_set_halt,
+	.set_wedge = cdns3_gadget_ep_set_wedge,
+};
+
+/**
+ * cdns3_gadget_get_frame - Returns number of actual ITP frame
+ * @gadget: gadget object
+ *
+ * Returns number of actual ITP frame
+ */
+static int cdns3_gadget_get_frame(struct usb_gadget *gadget)
+{
+	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+
+	return readl(&priv_dev->regs->usb_itpn);
+}
+
+int __cdns3_gadget_wakeup(struct cdns3_device *priv_dev)
+{
+	enum usb_device_speed speed;
+
+	speed = cdns3_get_speed(priv_dev);
+
+	if (speed >= USB_SPEED_SUPER)
+		return 0;
+
+	/* Start driving resume signaling to indicate remote wakeup. */
+	writel(USB_CONF_LGO_L0, &priv_dev->regs->usb_conf);
+
+	return 0;
+}
+
+static int cdns3_gadget_wakeup(struct usb_gadget *gadget)
+{
+	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+	ret = __cdns3_gadget_wakeup(priv_dev);
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+	return ret;
+}
+
+static int cdns3_gadget_set_selfpowered(struct usb_gadget *gadget,
+					int is_selfpowered)
+{
+	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+	priv_dev->is_selfpowered = !!is_selfpowered;
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+	return 0;
+}
+
+static int cdns3_gadget_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+
+	if (is_on) {
+		writel(USB_CONF_DEVEN, &priv_dev->regs->usb_conf);
+	} else {
+		writel(~0, &priv_dev->regs->ep_ists);
+		writel(~0, &priv_dev->regs->usb_ists);
+		writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
+	}
+
+	return 0;
+}
+
+static void cdns3_gadget_config(struct cdns3_device *priv_dev)
+{
+	struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
+	u32 reg;
+
+	cdns3_ep0_config(priv_dev);
+
+	/* enable interrupts for endpoint 0 (in and out) */
+	writel(EP_IEN_EP_OUT0 | EP_IEN_EP_IN0, &regs->ep_ien);
+
+	/*
+	 * Driver needs to modify LFPS minimal U1 Exit time for DEV_VER_TI_V1
+	 * revision of controller.
+	 */
+	if (priv_dev->dev_ver == DEV_VER_TI_V1) {
+		reg = readl(&regs->dbg_link1);
+
+		reg &= ~DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_MASK;
+		reg |= DBG_LINK1_LFPS_MIN_GEN_U1_EXIT(0x55) |
+		       DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_SET;
+		writel(reg, &regs->dbg_link1);
+	}
+
+	/*
+	 * By default some platforms has set protected access to memory.
+	 * This cause problem with cache, so driver restore non-secure
+	 * access to memory.
+	 */
+	reg = readl(&regs->dma_axi_ctrl);
+	reg |= DMA_AXI_CTRL_MARPROT(DMA_AXI_CTRL_NON_SECURE) |
+	       DMA_AXI_CTRL_MAWPROT(DMA_AXI_CTRL_NON_SECURE);
+	writel(reg, &regs->dma_axi_ctrl);
+
+	/* enable generic interrupt*/
+	writel(USB_IEN_INIT, &regs->usb_ien);
+	writel(USB_CONF_CLK2OFFDS | USB_CONF_L1DS, &regs->usb_conf);
+	/*  keep Fast Access bit */
+	writel(PUSB_PWR_FST_REG_ACCESS, &priv_dev->regs->usb_pwr);
+
+	cdns3_configure_dmult(priv_dev, NULL);
+}
+
+/**
+ * cdns3_gadget_udc_start - Gadget start
+ * @gadget: gadget object
+ * @driver: driver which operates on this gadget
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int cdns3_gadget_udc_start(struct usb_gadget *gadget,
+				  struct usb_gadget_driver *driver)
+{
+	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+	unsigned long flags;
+	enum usb_device_speed max_speed = driver->max_speed;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+	priv_dev->gadget_driver = driver;
+
+	/* limit speed if necessary */
+	max_speed = min(driver->max_speed, gadget->max_speed);
+
+	switch (max_speed) {
+	case USB_SPEED_FULL:
+		writel(USB_CONF_SFORCE_FS, &priv_dev->regs->usb_conf);
+		writel(USB_CONF_USB3DIS, &priv_dev->regs->usb_conf);
+		break;
+	case USB_SPEED_HIGH:
+		writel(USB_CONF_USB3DIS, &priv_dev->regs->usb_conf);
+		break;
+	case USB_SPEED_SUPER:
+		break;
+	default:
+		dev_err(priv_dev->dev,
+			"invalid maximum_speed parameter %d\n",
+			max_speed);
+		fallthrough;
+	case USB_SPEED_UNKNOWN:
+		/* default to superspeed */
+		max_speed = USB_SPEED_SUPER;
+		break;
+	}
+
+	cdns3_gadget_config(priv_dev);
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+	return 0;
+}
+
+/**
+ * cdns3_gadget_udc_stop - Stops gadget
+ * @gadget: gadget object
+ *
+ * Returns 0
+ */
+static int cdns3_gadget_udc_stop(struct usb_gadget *gadget)
+{
+	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+	struct cdns3_endpoint *priv_ep;
+	u32 bEndpointAddress;
+	struct usb_ep *ep;
+	int val;
+
+	priv_dev->gadget_driver = NULL;
+
+	priv_dev->onchip_used_size = 0;
+	priv_dev->out_mem_is_allocated = 0;
+	priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
+
+	list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
+		priv_ep = ep_to_cdns3_ep(ep);
+		bEndpointAddress = priv_ep->num | priv_ep->dir;
+		cdns3_select_ep(priv_dev, bEndpointAddress);
+		writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
+		readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+					  !(val & EP_CMD_EPRST), 1, 100);
+
+		priv_ep->flags &= ~EP_CLAIMED;
+	}
+
+	/* disable interrupt for device */
+	writel(0, &priv_dev->regs->usb_ien);
+	writel(0, &priv_dev->regs->usb_pwr);
+	writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
+
+	return 0;
+}
+
+/**
+ * cdns3_gadget_check_config - ensure cdns3 can support the USB configuration
+ * @gadget: pointer to the USB gadget
+ *
+ * Used to record the maximum number of endpoints being used in a USB composite
+ * device. (across all configurations)  This is to be used in the calculation
+ * of the TXFIFO sizes when resizing internal memory for individual endpoints.
+ * It will help ensured that the resizing logic reserves enough space for at
+ * least one max packet.
+ */
+static int cdns3_gadget_check_config(struct usb_gadget *gadget)
+{
+	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+	struct cdns3_endpoint *priv_ep;
+	struct usb_ep *ep;
+	int n_in = 0;
+	int iso = 0;
+	int out = 1;
+	int total;
+	int n;
+
+	list_for_each_entry(ep, &gadget->ep_list, ep_list) {
+		priv_ep = ep_to_cdns3_ep(ep);
+		if (!(priv_ep->flags & EP_CLAIMED))
+			continue;
+
+		n = (priv_ep->mult + 1) * (priv_ep->bMaxBurst + 1);
+		if (ep->address & USB_DIR_IN) {
+			/*
+			 * ISO transfer: DMA start move data when get ISO, only transfer
+			 * data as min(TD size, iso). No benefit for allocate bigger
+			 * internal memory than 'iso'.
+			 */
+			if (priv_ep->type == USB_ENDPOINT_XFER_ISOC)
+				iso += n;
+			else
+				n_in++;
+		} else {
+			if (priv_ep->type == USB_ENDPOINT_XFER_ISOC)
+				out = max_t(int, out, n);
+		}
+	}
+
+	/* 2KB are reserved for EP0, 1KB for out*/
+	total = 2 + n_in + out + iso;
+
+	if (total > priv_dev->onchip_buffers)
+		return -ENOMEM;
+
+	priv_dev->ep_buf_size = (priv_dev->onchip_buffers - 2 - iso) / (n_in + out);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops cdns3_gadget_ops = {
+	.get_frame = cdns3_gadget_get_frame,
+	.wakeup = cdns3_gadget_wakeup,
+	.set_selfpowered = cdns3_gadget_set_selfpowered,
+	.pullup = cdns3_gadget_pullup,
+	.udc_start = cdns3_gadget_udc_start,
+	.udc_stop = cdns3_gadget_udc_stop,
+	.match_ep = cdns3_gadget_match_ep,
+	.check_config = cdns3_gadget_check_config,
+};
+
+static void cdns3_free_all_eps(struct cdns3_device *priv_dev)
+{
+	int i;
+
+	/* ep0 OUT point to ep0 IN. */
+	priv_dev->eps[16] = NULL;
+
+	for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++)
+		if (priv_dev->eps[i]) {
+			cdns3_free_trb_pool(priv_dev->eps[i]);
+			devm_kfree(priv_dev->dev, priv_dev->eps[i]);
+		}
+}
+
+/**
+ * cdns3_init_eps - Initializes software endpoints of gadget
+ * @priv_dev: extended gadget object
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int cdns3_init_eps(struct cdns3_device *priv_dev)
+{
+	u32 ep_enabled_reg, iso_ep_reg;
+	struct cdns3_endpoint *priv_ep;
+	int ep_dir, ep_number;
+	u32 ep_mask;
+	int ret = 0;
+	int i;
+
+	/* Read it from USB_CAP3 to USB_CAP5 */
+	ep_enabled_reg = readl(&priv_dev->regs->usb_cap3);
+	iso_ep_reg = readl(&priv_dev->regs->usb_cap4);
+
+	dev_dbg(priv_dev->dev, "Initializing non-zero endpoints\n");
+
+	for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) {
+		ep_dir = i >> 4;	/* i div 16 */
+		ep_number = i & 0xF;	/* i % 16 */
+		ep_mask = BIT(i);
+
+		if (!(ep_enabled_reg & ep_mask))
+			continue;
+
+		if (ep_dir && !ep_number) {
+			priv_dev->eps[i] = priv_dev->eps[0];
+			continue;
+		}
+
+		priv_ep = devm_kzalloc(priv_dev->dev, sizeof(*priv_ep),
+				       GFP_KERNEL);
+		if (!priv_ep)
+			goto err;
+
+		/* set parent of endpoint object */
+		priv_ep->cdns3_dev = priv_dev;
+		priv_dev->eps[i] = priv_ep;
+		priv_ep->num = ep_number;
+		priv_ep->dir = ep_dir ? USB_DIR_IN : USB_DIR_OUT;
+
+		if (!ep_number) {
+			ret = cdns3_init_ep0(priv_dev, priv_ep);
+			if (ret) {
+				dev_err(priv_dev->dev, "Failed to init ep0\n");
+				goto err;
+			}
+		} else {
+			snprintf(priv_ep->name, sizeof(priv_ep->name), "ep%d%s",
+				 ep_number, !!ep_dir ? "in" : "out");
+			priv_ep->endpoint.name = priv_ep->name;
+
+			usb_ep_set_maxpacket_limit(&priv_ep->endpoint,
+						   CDNS3_EP_MAX_PACKET_LIMIT);
+			priv_ep->endpoint.max_streams = CDNS3_EP_MAX_STREAMS;
+			priv_ep->endpoint.ops = &cdns3_gadget_ep_ops;
+			if (ep_dir)
+				priv_ep->endpoint.caps.dir_in = 1;
+			else
+				priv_ep->endpoint.caps.dir_out = 1;
+
+			if (iso_ep_reg & ep_mask)
+				priv_ep->endpoint.caps.type_iso = 1;
+
+			priv_ep->endpoint.caps.type_bulk = 1;
+			priv_ep->endpoint.caps.type_int = 1;
+
+			list_add_tail(&priv_ep->endpoint.ep_list,
+				      &priv_dev->gadget.ep_list);
+		}
+
+		priv_ep->flags = 0;
+
+		dev_dbg(priv_dev->dev, "Initialized  %s support: %s %s\n",
+			 priv_ep->name,
+			 priv_ep->endpoint.caps.type_bulk ? "BULK, INT" : "",
+			 priv_ep->endpoint.caps.type_iso ? "ISO" : "");
+
+		INIT_LIST_HEAD(&priv_ep->pending_req_list);
+		INIT_LIST_HEAD(&priv_ep->deferred_req_list);
+		INIT_LIST_HEAD(&priv_ep->wa2_descmiss_req_list);
+	}
+
+	return 0;
+err:
+	cdns3_free_all_eps(priv_dev);
+	return -ENOMEM;
+}
+
+static void cdns3_gadget_release(struct device *dev)
+{
+	struct cdns3_device *priv_dev = container_of(dev,
+			struct cdns3_device, gadget.dev);
+
+	kfree(priv_dev);
+}
+
+static void cdns3_gadget_exit(struct cdns *cdns)
+{
+	struct cdns3_device *priv_dev;
+
+	priv_dev = cdns->gadget_dev;
+
+
+	pm_runtime_mark_last_busy(cdns->dev);
+	pm_runtime_put_autosuspend(cdns->dev);
+
+	usb_del_gadget(&priv_dev->gadget);
+	devm_free_irq(cdns->dev, cdns->dev_irq, priv_dev);
+
+	cdns3_free_all_eps(priv_dev);
+
+	while (!list_empty(&priv_dev->aligned_buf_list)) {
+		struct cdns3_aligned_buf *buf;
+
+		buf = cdns3_next_align_buf(&priv_dev->aligned_buf_list);
+		dma_free_noncoherent(priv_dev->sysdev, buf->size,
+				  buf->buf,
+				  buf->dma,
+				  buf->dir);
+
+		list_del(&buf->list);
+		kfree(buf);
+	}
+
+	dma_free_coherent(priv_dev->sysdev, 8, priv_dev->setup_buf,
+			  priv_dev->setup_dma);
+	dma_pool_destroy(priv_dev->eps_dma_pool);
+
+	kfree(priv_dev->zlp_buf);
+	usb_put_gadget(&priv_dev->gadget);
+	cdns->gadget_dev = NULL;
+	cdns_drd_gadget_off(cdns);
+}
+
+static int cdns3_gadget_start(struct cdns *cdns)
+{
+	struct cdns3_device *priv_dev;
+	u32 max_speed;
+	int ret;
+
+	priv_dev = kzalloc(sizeof(*priv_dev), GFP_KERNEL);
+	if (!priv_dev)
+		return -ENOMEM;
+
+	usb_initialize_gadget(cdns->dev, &priv_dev->gadget,
+			cdns3_gadget_release);
+	cdns->gadget_dev = priv_dev;
+	priv_dev->sysdev = cdns->dev;
+	priv_dev->dev = cdns->dev;
+	priv_dev->regs = cdns->dev_regs;
+
+	device_property_read_u16(priv_dev->dev, "cdns,on-chip-buff-size",
+				 &priv_dev->onchip_buffers);
+
+	if (priv_dev->onchip_buffers <=  0) {
+		u32 reg = readl(&priv_dev->regs->usb_cap2);
+
+		priv_dev->onchip_buffers = USB_CAP2_ACTUAL_MEM_SIZE(reg);
+	}
+
+	if (!priv_dev->onchip_buffers)
+		priv_dev->onchip_buffers = 256;
+
+	max_speed = usb_get_maximum_speed(cdns->dev);
+
+	/* Check the maximum_speed parameter */
+	switch (max_speed) {
+	case USB_SPEED_FULL:
+	case USB_SPEED_HIGH:
+	case USB_SPEED_SUPER:
+		break;
+	default:
+		dev_err(cdns->dev, "invalid maximum_speed parameter %d\n",
+			max_speed);
+		fallthrough;
+	case USB_SPEED_UNKNOWN:
+		/* default to superspeed */
+		max_speed = USB_SPEED_SUPER;
+		break;
+	}
+
+	/* fill gadget fields */
+	priv_dev->gadget.max_speed = max_speed;
+	priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
+	priv_dev->gadget.ops = &cdns3_gadget_ops;
+	priv_dev->gadget.name = "usb-ss-gadget";
+	priv_dev->gadget.quirk_avoids_skb_reserve = 1;
+	priv_dev->gadget.irq = cdns->dev_irq;
+
+	spin_lock_init(&priv_dev->lock);
+	INIT_WORK(&priv_dev->pending_status_wq,
+		  cdns3_pending_setup_status_handler);
+
+	INIT_WORK(&priv_dev->aligned_buf_wq,
+		  cdns3_free_aligned_request_buf);
+
+	/* initialize endpoint container */
+	INIT_LIST_HEAD(&priv_dev->gadget.ep_list);
+	INIT_LIST_HEAD(&priv_dev->aligned_buf_list);
+	priv_dev->eps_dma_pool = dma_pool_create("cdns3_eps_dma_pool",
+						 priv_dev->sysdev,
+						 TRB_RING_SIZE, 8, 0);
+	if (!priv_dev->eps_dma_pool) {
+		dev_err(priv_dev->dev, "Failed to create TRB dma pool\n");
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	ret = cdns3_init_eps(priv_dev);
+	if (ret) {
+		dev_err(priv_dev->dev, "Failed to create endpoints\n");
+		goto err1;
+	}
+
+	/* allocate memory for setup packet buffer */
+	priv_dev->setup_buf = dma_alloc_coherent(priv_dev->sysdev, 8,
+						 &priv_dev->setup_dma, GFP_DMA);
+	if (!priv_dev->setup_buf) {
+		ret = -ENOMEM;
+		goto err2;
+	}
+
+	priv_dev->dev_ver = readl(&priv_dev->regs->usb_cap6);
+
+	dev_dbg(priv_dev->dev, "Device Controller version: %08x\n",
+		readl(&priv_dev->regs->usb_cap6));
+	dev_dbg(priv_dev->dev, "USB Capabilities:: %08x\n",
+		readl(&priv_dev->regs->usb_cap1));
+	dev_dbg(priv_dev->dev, "On-Chip memory configuration: %08x\n",
+		readl(&priv_dev->regs->usb_cap2));
+
+	priv_dev->dev_ver = GET_DEV_BASE_VERSION(priv_dev->dev_ver);
+	if (priv_dev->dev_ver >= DEV_VER_V2)
+		priv_dev->gadget.sg_supported = 1;
+
+	priv_dev->zlp_buf = kzalloc(CDNS3_EP_ZLP_BUF_SIZE, GFP_KERNEL);
+	if (!priv_dev->zlp_buf) {
+		ret = -ENOMEM;
+		goto err3;
+	}
+
+	/* add USB gadget device */
+	ret = usb_add_gadget(&priv_dev->gadget);
+	if (ret < 0) {
+		dev_err(priv_dev->dev, "Failed to add gadget\n");
+		goto err4;
+	}
+
+	return 0;
+err4:
+	kfree(priv_dev->zlp_buf);
+err3:
+	dma_free_coherent(priv_dev->sysdev, 8, priv_dev->setup_buf,
+			  priv_dev->setup_dma);
+err2:
+	cdns3_free_all_eps(priv_dev);
+err1:
+	dma_pool_destroy(priv_dev->eps_dma_pool);
+
+	usb_put_gadget(&priv_dev->gadget);
+	cdns->gadget_dev = NULL;
+	return ret;
+}
+
+static int __cdns3_gadget_init(struct cdns *cdns)
+{
+	int ret = 0;
+
+	/* Ensure 32-bit DMA Mask in case we switched back from Host mode */
+	ret = dma_set_mask_and_coherent(cdns->dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(cdns->dev, "Failed to set dma mask: %d\n", ret);
+		return ret;
+	}
+
+	cdns_drd_gadget_on(cdns);
+	pm_runtime_get_sync(cdns->dev);
+
+	ret = cdns3_gadget_start(cdns);
+	if (ret) {
+		pm_runtime_put_sync(cdns->dev);
+		return ret;
+	}
+
+	/*
+	 * Because interrupt line can be shared with other components in
+	 * driver it can't use IRQF_ONESHOT flag here.
+	 */
+	ret = devm_request_threaded_irq(cdns->dev, cdns->dev_irq,
+					cdns3_device_irq_handler,
+					cdns3_device_thread_irq_handler,
+					IRQF_SHARED, dev_name(cdns->dev),
+					cdns->gadget_dev);
+
+	if (ret)
+		goto err0;
+
+	return 0;
+err0:
+	cdns3_gadget_exit(cdns);
+	return ret;
+}
+
+static int cdns3_gadget_suspend(struct cdns *cdns, bool do_wakeup)
+__must_hold(&cdns->lock)
+{
+	struct cdns3_device *priv_dev = cdns->gadget_dev;
+
+	spin_unlock(&cdns->lock);
+	cdns3_disconnect_gadget(priv_dev);
+	spin_lock(&cdns->lock);
+
+	priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
+	usb_gadget_set_state(&priv_dev->gadget, USB_STATE_NOTATTACHED);
+	cdns3_hw_reset_eps_config(priv_dev);
+
+	/* disable interrupt for device */
+	writel(0, &priv_dev->regs->usb_ien);
+
+	return 0;
+}
+
+static int cdns3_gadget_resume(struct cdns *cdns, bool hibernated)
+{
+	struct cdns3_device *priv_dev = cdns->gadget_dev;
+
+	if (!priv_dev->gadget_driver)
+		return 0;
+
+	cdns3_gadget_config(priv_dev);
+	if (hibernated)
+		writel(USB_CONF_DEVEN, &priv_dev->regs->usb_conf);
+
+	return 0;
+}
+
+/**
+ * cdns3_gadget_init - initialize device structure
+ *
+ * @cdns: cdns instance
+ *
+ * This function initializes the gadget.
+ */
+int cdns3_gadget_init(struct cdns *cdns)
+{
+	struct cdns_role_driver *rdrv;
+
+	rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
+	if (!rdrv)
+		return -ENOMEM;
+
+	rdrv->start	= __cdns3_gadget_init;
+	rdrv->stop	= cdns3_gadget_exit;
+	rdrv->suspend	= cdns3_gadget_suspend;
+	rdrv->resume	= cdns3_gadget_resume;
+	rdrv->state	= CDNS_ROLE_STATE_INACTIVE;
+	rdrv->name	= "gadget";
+	cdns->roles[USB_ROLE_DEVICE] = rdrv;
+
+	return 0;
+}
diff --git a/drivers/usb/cdns3/cdns3-gadget.h b/drivers/usb/cdns3/cdns3-gadget.h
new file mode 100644
index 000000000..086a7bb83
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-gadget.h
@@ -0,0 +1,1377 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * USBSS device controller driver header file
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *         Pawel Jez <pjez@cadence.com>
+ *         Peter Chen <peter.chen@nxp.com>
+ */
+#ifndef __LINUX_CDNS3_GADGET
+#define __LINUX_CDNS3_GADGET
+#include <linux/usb/gadget.h>
+#include <linux/dma-direction.h>
+
+/*
+ * USBSS-DEV register interface.
+ * This corresponds to the USBSS Device Controller Interface
+ */
+
+/**
+ * struct cdns3_usb_regs - device controller registers.
+ * @usb_conf:      Global Configuration.
+ * @usb_sts:       Global Status.
+ * @usb_cmd:       Global Command.
+ * @usb_itpn:      ITP/SOF number.
+ * @usb_lpm:       Global Command.
+ * @usb_ien:       USB Interrupt Enable.
+ * @usb_ists:      USB Interrupt Status.
+ * @ep_sel:        Endpoint Select.
+ * @ep_traddr:     Endpoint Transfer Ring Address.
+ * @ep_cfg:        Endpoint Configuration.
+ * @ep_cmd:        Endpoint Command.
+ * @ep_sts:        Endpoint Status.
+ * @ep_sts_sid:    Endpoint Status.
+ * @ep_sts_en:     Endpoint Status Enable.
+ * @drbl:          Doorbell.
+ * @ep_ien:        EP Interrupt Enable.
+ * @ep_ists:       EP Interrupt Status.
+ * @usb_pwr:       Global Power Configuration.
+ * @usb_conf2:     Global Configuration 2.
+ * @usb_cap1:      Capability 1.
+ * @usb_cap2:      Capability 2.
+ * @usb_cap3:      Capability 3.
+ * @usb_cap4:      Capability 4.
+ * @usb_cap5:      Capability 5.
+ * @usb_cap6:      Capability 6.
+ * @usb_cpkt1:     Custom Packet 1.
+ * @usb_cpkt2:     Custom Packet 2.
+ * @usb_cpkt3:     Custom Packet 3.
+ * @ep_dma_ext_addr: Upper address for DMA operations.
+ * @buf_addr:      Address for On-chip Buffer operations.
+ * @buf_data:      Data for On-chip Buffer operations.
+ * @buf_ctrl:      On-chip Buffer Access Control.
+ * @dtrans:        DMA Transfer Mode.
+ * @tdl_from_trb:  Source of TD Configuration.
+ * @tdl_beh:       TDL Behavior Configuration.
+ * @ep_tdl:        Endpoint TDL.
+ * @tdl_beh2:      TDL Behavior 2 Configuration.
+ * @dma_adv_td:    DMA Advance TD Configuration.
+ * @reserved1:     Reserved.
+ * @cfg_regs:      Configuration.
+ * @reserved2:     Reserved.
+ * @dma_axi_ctrl:  AXI Control.
+ * @dma_axi_id:    AXI ID register.
+ * @dma_axi_cap:   AXI Capability.
+ * @dma_axi_ctrl0: AXI Control 0.
+ * @dma_axi_ctrl1: AXI Control 1.
+ */
+struct cdns3_usb_regs {
+	__le32 usb_conf;
+	__le32 usb_sts;
+	__le32 usb_cmd;
+	__le32 usb_itpn;
+	__le32 usb_lpm;
+	__le32 usb_ien;
+	__le32 usb_ists;
+	__le32 ep_sel;
+	__le32 ep_traddr;
+	__le32 ep_cfg;
+	__le32 ep_cmd;
+	__le32 ep_sts;
+	__le32 ep_sts_sid;
+	__le32 ep_sts_en;
+	__le32 drbl;
+	__le32 ep_ien;
+	__le32 ep_ists;
+	__le32 usb_pwr;
+	__le32 usb_conf2;
+	__le32 usb_cap1;
+	__le32 usb_cap2;
+	__le32 usb_cap3;
+	__le32 usb_cap4;
+	__le32 usb_cap5;
+	__le32 usb_cap6;
+	__le32 usb_cpkt1;
+	__le32 usb_cpkt2;
+	__le32 usb_cpkt3;
+	__le32 ep_dma_ext_addr;
+	__le32 buf_addr;
+	__le32 buf_data;
+	__le32 buf_ctrl;
+	__le32 dtrans;
+	__le32 tdl_from_trb;
+	__le32 tdl_beh;
+	__le32 ep_tdl;
+	__le32 tdl_beh2;
+	__le32 dma_adv_td;
+	__le32 reserved1[26];
+	__le32 cfg_reg1;
+	__le32 dbg_link1;
+	__le32 dbg_link2;
+	__le32 cfg_regs[74];
+	__le32 reserved2[51];
+	__le32 dma_axi_ctrl;
+	__le32 dma_axi_id;
+	__le32 dma_axi_cap;
+	__le32 dma_axi_ctrl0;
+	__le32 dma_axi_ctrl1;
+};
+
+/* USB_CONF - bitmasks */
+/* Reset USB device configuration. */
+#define USB_CONF_CFGRST		BIT(0)
+/* Set Configuration. */
+#define USB_CONF_CFGSET		BIT(1)
+/* Disconnect USB device in SuperSpeed. */
+#define USB_CONF_USB3DIS	BIT(3)
+/* Disconnect USB device in HS/FS */
+#define USB_CONF_USB2DIS	BIT(4)
+/* Little Endian access - default */
+#define USB_CONF_LENDIAN	BIT(5)
+/*
+ * Big Endian access. Driver assume that byte order for
+ * SFRs access always is as Little Endian so this bit
+ * is not used.
+ */
+#define USB_CONF_BENDIAN	BIT(6)
+/* Device software reset. */
+#define USB_CONF_SWRST		BIT(7)
+/* Singular DMA transfer mode. Only for VER < DEV_VER_V3*/
+#define USB_CONF_DSING		BIT(8)
+/* Multiple DMA transfers mode. Only for VER < DEV_VER_V3 */
+#define USB_CONF_DMULT		BIT(9)
+/* DMA clock turn-off enable. */
+#define USB_CONF_DMAOFFEN	BIT(10)
+/* DMA clock turn-off disable. */
+#define USB_CONF_DMAOFFDS	BIT(11)
+/* Clear Force Full Speed. */
+#define USB_CONF_CFORCE_FS	BIT(12)
+/* Set Force Full Speed. */
+#define USB_CONF_SFORCE_FS	BIT(13)
+/* Device enable. */
+#define USB_CONF_DEVEN		BIT(14)
+/* Device disable. */
+#define USB_CONF_DEVDS		BIT(15)
+/* L1 LPM state entry enable (used in HS/FS mode). */
+#define USB_CONF_L1EN		BIT(16)
+/* L1 LPM state entry disable (used in HS/FS mode). */
+#define USB_CONF_L1DS		BIT(17)
+/* USB 2.0 clock gate disable. */
+#define USB_CONF_CLK2OFFEN	BIT(18)
+/* USB 2.0 clock gate enable. */
+#define USB_CONF_CLK2OFFDS	BIT(19)
+/* L0 LPM state entry request (used in HS/FS mode). */
+#define USB_CONF_LGO_L0		BIT(20)
+/* USB 3.0 clock gate disable. */
+#define USB_CONF_CLK3OFFEN	BIT(21)
+/* USB 3.0 clock gate enable. */
+#define USB_CONF_CLK3OFFDS	BIT(22)
+/* Bit 23 is reserved*/
+/* U1 state entry enable (used in SS mode). */
+#define USB_CONF_U1EN		BIT(24)
+/* U1 state entry disable (used in SS mode). */
+#define USB_CONF_U1DS		BIT(25)
+/* U2 state entry enable (used in SS mode). */
+#define USB_CONF_U2EN		BIT(26)
+/* U2 state entry disable (used in SS mode). */
+#define USB_CONF_U2DS		BIT(27)
+/* U0 state entry request (used in SS mode). */
+#define USB_CONF_LGO_U0		BIT(28)
+/* U1 state entry request (used in SS mode). */
+#define USB_CONF_LGO_U1		BIT(29)
+/* U2 state entry request (used in SS mode). */
+#define USB_CONF_LGO_U2		BIT(30)
+/* SS.Inactive state entry request (used in SS mode) */
+#define USB_CONF_LGO_SSINACT	BIT(31)
+
+/* USB_STS - bitmasks */
+/*
+ * Configuration status.
+ * 1 - device is in the configured state.
+ * 0 - device is not configured.
+ */
+#define USB_STS_CFGSTS_MASK	BIT(0)
+#define USB_STS_CFGSTS(p)	((p) & USB_STS_CFGSTS_MASK)
+/*
+ * On-chip memory overflow.
+ * 0 - On-chip memory status OK.
+ * 1 - On-chip memory overflow.
+ */
+#define USB_STS_OV_MASK		BIT(1)
+#define USB_STS_OV(p)		((p) & USB_STS_OV_MASK)
+/*
+ * SuperSpeed connection status.
+ * 0 - USB in SuperSpeed mode disconnected.
+ * 1 - USB in SuperSpeed mode connected.
+ */
+#define USB_STS_USB3CONS_MASK	BIT(2)
+#define USB_STS_USB3CONS(p)	((p) & USB_STS_USB3CONS_MASK)
+/*
+ * DMA transfer configuration status.
+ * 0 - single request.
+ * 1 - multiple TRB chain
+ * Supported only for controller version <  DEV_VER_V3
+ */
+#define USB_STS_DTRANS_MASK	BIT(3)
+#define USB_STS_DTRANS(p)	((p) & USB_STS_DTRANS_MASK)
+/*
+ * Device speed.
+ * 0 - Undefined (value after reset).
+ * 1 - Low speed
+ * 2 - Full speed
+ * 3 - High speed
+ * 4 - Super speed
+ */
+#define USB_STS_USBSPEED_MASK	GENMASK(6, 4)
+#define USB_STS_USBSPEED(p)	(((p) & USB_STS_USBSPEED_MASK) >> 4)
+#define USB_STS_LS		(0x1 << 4)
+#define USB_STS_FS		(0x2 << 4)
+#define USB_STS_HS		(0x3 << 4)
+#define USB_STS_SS		(0x4 << 4)
+#define DEV_UNDEFSPEED(p)	(((p) & USB_STS_USBSPEED_MASK) == (0x0 << 4))
+#define DEV_LOWSPEED(p)		(((p) & USB_STS_USBSPEED_MASK) == USB_STS_LS)
+#define DEV_FULLSPEED(p)	(((p) & USB_STS_USBSPEED_MASK) == USB_STS_FS)
+#define DEV_HIGHSPEED(p)	(((p) & USB_STS_USBSPEED_MASK) == USB_STS_HS)
+#define DEV_SUPERSPEED(p)	(((p) & USB_STS_USBSPEED_MASK) == USB_STS_SS)
+/*
+ * Endianness for SFR access.
+ * 0 - Little Endian order (default after hardware reset).
+ * 1 - Big Endian order
+ */
+#define USB_STS_ENDIAN_MASK	BIT(7)
+#define USB_STS_ENDIAN(p)	((p) & USB_STS_ENDIAN_MASK)
+/*
+ * HS/FS clock turn-off status.
+ * 0 - hsfs clock is always on.
+ * 1 - hsfs clock turn-off in L2 (HS/FS mode) is enabled
+ *          (default after hardware reset).
+ */
+#define USB_STS_CLK2OFF_MASK	BIT(8)
+#define USB_STS_CLK2OFF(p)	((p) & USB_STS_CLK2OFF_MASK)
+/*
+ * PCLK clock turn-off status.
+ * 0 - pclk clock is always on.
+ * 1 - pclk clock turn-off in U3 (SS mode) is enabled
+ *          (default after hardware reset).
+ */
+#define USB_STS_CLK3OFF_MASK	BIT(9)
+#define USB_STS_CLK3OFF(p)	((p) & USB_STS_CLK3OFF_MASK)
+/*
+ * Controller in reset state.
+ * 0 - Internal reset is active.
+ * 1 - Internal reset is not active and controller is fully operational.
+ */
+#define USB_STS_IN_RST_MASK	BIT(10)
+#define USB_STS_IN_RST(p)	((p) & USB_STS_IN_RST_MASK)
+/*
+ * Status of the "TDL calculation basing on TRB" feature.
+ * 0 - disabled
+ * 1 - enabled
+ * Supported only for DEV_VER_V2 controller version.
+ */
+#define USB_STS_TDL_TRB_ENABLED	BIT(11)
+/*
+ * Device enable Status.
+ * 0 - USB device is disabled (VBUS input is disconnected from internal logic).
+ * 1 - USB device is enabled (VBUS input is connected to the internal logic).
+ */
+#define USB_STS_DEVS_MASK	BIT(14)
+#define USB_STS_DEVS(p)		((p) & USB_STS_DEVS_MASK)
+/*
+ * Address status.
+ * 0 - USB device is default state.
+ * 1 - USB device is at least in address state.
+ */
+#define USB_STS_ADDRESSED_MASK	BIT(15)
+#define USB_STS_ADDRESSED(p)	((p) & USB_STS_ADDRESSED_MASK)
+/*
+ * L1 LPM state enable status (used in HS/FS mode).
+ * 0 - Entering to L1 LPM state disabled.
+ * 1 - Entering to L1 LPM state enabled.
+ */
+#define USB_STS_L1ENS_MASK	BIT(16)
+#define USB_STS_L1ENS(p)	((p) & USB_STS_L1ENS_MASK)
+/*
+ * Internal VBUS connection status (used both in HS/FS  and SS mode).
+ * 0 - internal VBUS is not detected.
+ * 1 - internal VBUS is detected.
+ */
+#define USB_STS_VBUSS_MASK	BIT(17)
+#define USB_STS_VBUSS(p)	((p) & USB_STS_VBUSS_MASK)
+/*
+ * HS/FS LPM  state (used in FS/HS mode).
+ * 0 - L0 State
+ * 1 - L1 State
+ * 2 - L2 State
+ * 3 - L3 State
+ */
+#define USB_STS_LPMST_MASK	GENMASK(19, 18)
+#define DEV_L0_STATE(p)		(((p) & USB_STS_LPMST_MASK) == (0x0 << 18))
+#define DEV_L1_STATE(p)		(((p) & USB_STS_LPMST_MASK) == (0x1 << 18))
+#define DEV_L2_STATE(p)		(((p) & USB_STS_LPMST_MASK) == (0x2 << 18))
+#define DEV_L3_STATE(p)		(((p) & USB_STS_LPMST_MASK) == (0x3 << 18))
+/*
+ * Disable HS status (used in FS/HS mode).
+ * 0 - the disconnect bit for HS/FS mode is set .
+ * 1 - the disconnect bit for HS/FS mode is not set.
+ */
+#define USB_STS_USB2CONS_MASK	BIT(20)
+#define USB_STS_USB2CONS(p)	((p) & USB_STS_USB2CONS_MASK)
+/*
+ * HS/FS mode connection status (used in FS/HS mode).
+ * 0 - High Speed operations in USB2.0 (FS/HS) mode not disabled.
+ * 1 - High Speed operations in USB2.0 (FS/HS).
+ */
+#define USB_STS_DISABLE_HS_MASK	BIT(21)
+#define USB_STS_DISABLE_HS(p)	((p) & USB_STS_DISABLE_HS_MASK)
+/*
+ * U1 state enable status (used in SS mode).
+ * 0 - Entering to  U1 state disabled.
+ * 1 - Entering to  U1 state enabled.
+ */
+#define USB_STS_U1ENS_MASK	BIT(24)
+#define USB_STS_U1ENS(p)	((p) & USB_STS_U1ENS_MASK)
+/*
+ * U2 state enable status (used in SS mode).
+ * 0 - Entering to  U2 state disabled.
+ * 1 - Entering to  U2 state enabled.
+ */
+#define USB_STS_U2ENS_MASK	BIT(25)
+#define USB_STS_U2ENS(p)	((p) & USB_STS_U2ENS_MASK)
+/*
+ * SuperSpeed Link LTSSM state. This field reflects USBSS-DEV current
+ * SuperSpeed link state
+ */
+#define USB_STS_LST_MASK	GENMASK(29, 26)
+#define DEV_LST_U0		(((p) & USB_STS_LST_MASK) == (0x0 << 26))
+#define DEV_LST_U1		(((p) & USB_STS_LST_MASK) == (0x1 << 26))
+#define DEV_LST_U2		(((p) & USB_STS_LST_MASK) == (0x2 << 26))
+#define DEV_LST_U3		(((p) & USB_STS_LST_MASK) == (0x3 << 26))
+#define DEV_LST_DISABLED	(((p) & USB_STS_LST_MASK) == (0x4 << 26))
+#define DEV_LST_RXDETECT	(((p) & USB_STS_LST_MASK) == (0x5 << 26))
+#define DEV_LST_INACTIVE	(((p) & USB_STS_LST_MASK) == (0x6 << 26))
+#define DEV_LST_POLLING		(((p) & USB_STS_LST_MASK) == (0x7 << 26))
+#define DEV_LST_RECOVERY	(((p) & USB_STS_LST_MASK) == (0x8 << 26))
+#define DEV_LST_HOT_RESET	(((p) & USB_STS_LST_MASK) == (0x9 << 26))
+#define DEV_LST_COMP_MODE	(((p) & USB_STS_LST_MASK) == (0xa << 26))
+#define DEV_LST_LB_STATE	(((p) & USB_STS_LST_MASK) == (0xb << 26))
+/*
+ * DMA clock turn-off status.
+ * 0 - DMA clock is always on (default after hardware reset).
+ * 1 - DMA clock turn-off in U1, U2 and U3 (SS mode) is enabled.
+ */
+#define USB_STS_DMAOFF_MASK	BIT(30)
+#define USB_STS_DMAOFF(p)	((p) & USB_STS_DMAOFF_MASK)
+/*
+ * SFR Endian status.
+ * 0 - Little Endian order (default after hardware reset).
+ * 1 - Big Endian order.
+ */
+#define USB_STS_ENDIAN2_MASK	BIT(31)
+#define USB_STS_ENDIAN2(p)	((p) & USB_STS_ENDIAN2_MASK)
+
+/* USB_CMD -  bitmasks */
+/* Set Function Address */
+#define USB_CMD_SET_ADDR	BIT(0)
+/*
+ * Function Address This field is saved to the device only when the field
+ * SET_ADDR is set '1 ' during write to USB_CMD register.
+ * Software is responsible for entering the address of the device during
+ * SET_ADDRESS request service. This field should be set immediately after
+ * the SETUP packet is decoded, and prior to confirmation of the status phase
+ */
+#define USB_CMD_FADDR_MASK	GENMASK(7, 1)
+#define USB_CMD_FADDR(p)	(((p) << 1) & USB_CMD_FADDR_MASK)
+/* Send Function Wake Device Notification TP (used only in SS mode). */
+#define USB_CMD_SDNFW		BIT(8)
+/* Set Test Mode (used only in HS/FS mode). */
+#define USB_CMD_STMODE		BIT(9)
+/* Test mode selector (used only in HS/FS mode) */
+#define USB_STS_TMODE_SEL_MASK	GENMASK(11, 10)
+#define USB_STS_TMODE_SEL(p)	(((p) << 10) & USB_STS_TMODE_SEL_MASK)
+/*
+ *  Send Latency Tolerance Message Device Notification TP (used only
+ *  in SS mode).
+ */
+#define USB_CMD_SDNLTM		BIT(12)
+/* Send Custom Transaction Packet (used only in SS mode) */
+#define USB_CMD_SPKT		BIT(13)
+/*Device Notification 'Function Wake' - Interface value (only in SS mode. */
+#define USB_CMD_DNFW_INT_MASK	GENMASK(23, 16)
+#define USB_STS_DNFW_INT(p)	(((p) << 16) & USB_CMD_DNFW_INT_MASK)
+/*
+ * Device Notification 'Latency Tolerance Message' -373 BELT value [7:0]
+ * (used only in SS mode).
+ */
+#define USB_CMD_DNLTM_BELT_MASK	GENMASK(27, 16)
+#define USB_STS_DNLTM_BELT(p)	(((p) << 16) & USB_CMD_DNLTM_BELT_MASK)
+
+/* USB_ITPN - bitmasks */
+/*
+ * ITP(SS) / SOF (HS/FS) number
+ * In SS mode this field represent number of last ITP received from host.
+ * In HS/FS mode this field represent number of last SOF received from host.
+ */
+#define USB_ITPN_MASK		GENMASK(13, 0)
+#define USB_ITPN(p)		((p) & USB_ITPN_MASK)
+
+/* USB_LPM - bitmasks */
+/* Host Initiated Resume Duration. */
+#define USB_LPM_HIRD_MASK	GENMASK(3, 0)
+#define USB_LPM_HIRD(p)		((p) & USB_LPM_HIRD_MASK)
+/* Remote Wakeup Enable (bRemoteWake). */
+#define USB_LPM_BRW		BIT(4)
+
+/* USB_IEN - bitmasks */
+/* SS connection interrupt enable */
+#define USB_IEN_CONIEN		BIT(0)
+/* SS disconnection interrupt enable. */
+#define USB_IEN_DISIEN		BIT(1)
+/* USB SS warm reset interrupt enable. */
+#define USB_IEN_UWRESIEN	BIT(2)
+/* USB SS hot reset interrupt enable */
+#define USB_IEN_UHRESIEN	BIT(3)
+/* SS link U3 state enter interrupt enable (suspend).*/
+#define USB_IEN_U3ENTIEN	BIT(4)
+/* SS link U3 state exit interrupt enable (wakeup). */
+#define USB_IEN_U3EXTIEN	BIT(5)
+/* SS link U2 state enter interrupt enable.*/
+#define USB_IEN_U2ENTIEN	BIT(6)
+/* SS link U2 state exit interrupt enable.*/
+#define USB_IEN_U2EXTIEN	BIT(7)
+/* SS link U1 state enter interrupt enable.*/
+#define USB_IEN_U1ENTIEN	BIT(8)
+/* SS link U1 state exit interrupt enable.*/
+#define USB_IEN_U1EXTIEN	BIT(9)
+/* ITP/SOF packet detected interrupt enable.*/
+#define USB_IEN_ITPIEN		BIT(10)
+/* Wakeup interrupt enable.*/
+#define USB_IEN_WAKEIEN		BIT(11)
+/* Send Custom Packet interrupt enable.*/
+#define USB_IEN_SPKTIEN		BIT(12)
+/* HS/FS mode connection interrupt enable.*/
+#define USB_IEN_CON2IEN		BIT(16)
+/* HS/FS mode disconnection interrupt enable.*/
+#define USB_IEN_DIS2IEN		BIT(17)
+/* USB reset (HS/FS mode) interrupt enable.*/
+#define USB_IEN_U2RESIEN	BIT(18)
+/* LPM L2 state enter interrupt enable.*/
+#define USB_IEN_L2ENTIEN	BIT(20)
+/* LPM  L2 state exit interrupt enable.*/
+#define USB_IEN_L2EXTIEN	BIT(21)
+/* LPM L1 state enter interrupt enable.*/
+#define USB_IEN_L1ENTIEN	BIT(24)
+/* LPM  L1 state exit interrupt enable.*/
+#define USB_IEN_L1EXTIEN	BIT(25)
+/* Configuration reset interrupt enable.*/
+#define USB_IEN_CFGRESIEN	BIT(26)
+/* Start of the USB SS warm reset interrupt enable.*/
+#define USB_IEN_UWRESSIEN	BIT(28)
+/* End of the USB SS warm reset interrupt enable.*/
+#define USB_IEN_UWRESEIEN	BIT(29)
+
+#define USB_IEN_INIT  (USB_IEN_U2RESIEN | USB_ISTS_DIS2I | USB_IEN_CON2IEN \
+		       | USB_IEN_UHRESIEN | USB_IEN_UWRESIEN | USB_IEN_DISIEN \
+		       | USB_IEN_CONIEN | USB_IEN_U3EXTIEN | USB_IEN_L2ENTIEN \
+		       | USB_IEN_L2EXTIEN | USB_IEN_L1ENTIEN | USB_IEN_U3ENTIEN)
+
+/* USB_ISTS - bitmasks */
+/* SS Connection detected. */
+#define USB_ISTS_CONI		BIT(0)
+/* SS Disconnection detected. */
+#define USB_ISTS_DISI		BIT(1)
+/* UUSB warm reset detectede. */
+#define USB_ISTS_UWRESI		BIT(2)
+/* USB hot reset detected. */
+#define USB_ISTS_UHRESI		BIT(3)
+/* U3 link state enter detected (suspend).*/
+#define USB_ISTS_U3ENTI		BIT(4)
+/* U3 link state exit detected (wakeup). */
+#define USB_ISTS_U3EXTI		BIT(5)
+/* U2 link state enter detected.*/
+#define USB_ISTS_U2ENTI		BIT(6)
+/* U2 link state exit detected.*/
+#define USB_ISTS_U2EXTI		BIT(7)
+/* U1 link state enter detected.*/
+#define USB_ISTS_U1ENTI		BIT(8)
+/* U1 link state exit detected.*/
+#define USB_ISTS_U1EXTI		BIT(9)
+/* ITP/SOF packet detected.*/
+#define USB_ISTS_ITPI		BIT(10)
+/* Wakeup detected.*/
+#define USB_ISTS_WAKEI		BIT(11)
+/* Send Custom Packet detected.*/
+#define USB_ISTS_SPKTI		BIT(12)
+/* HS/FS mode connection detected.*/
+#define USB_ISTS_CON2I		BIT(16)
+/* HS/FS mode disconnection detected.*/
+#define USB_ISTS_DIS2I		BIT(17)
+/* USB reset (HS/FS mode) detected.*/
+#define USB_ISTS_U2RESI		BIT(18)
+/* LPM L2 state enter detected.*/
+#define USB_ISTS_L2ENTI		BIT(20)
+/* LPM  L2 state exit detected.*/
+#define USB_ISTS_L2EXTI		BIT(21)
+/* LPM L1 state enter detected.*/
+#define USB_ISTS_L1ENTI		BIT(24)
+/* LPM L1 state exit detected.*/
+#define USB_ISTS_L1EXTI		BIT(25)
+/* USB configuration reset detected.*/
+#define USB_ISTS_CFGRESI	BIT(26)
+/* Start of the USB warm reset detected.*/
+#define USB_ISTS_UWRESSI	BIT(28)
+/* End of the USB warm reset detected.*/
+#define USB_ISTS_UWRESEI	BIT(29)
+
+/* USB_SEL - bitmasks */
+#define EP_SEL_EPNO_MASK	GENMASK(3, 0)
+/* Endpoint number. */
+#define EP_SEL_EPNO(p)		((p) & EP_SEL_EPNO_MASK)
+/* Endpoint direction bit - 0 - OUT, 1 - IN. */
+#define EP_SEL_DIR		BIT(7)
+
+#define select_ep_in(nr)	(EP_SEL_EPNO(p) | EP_SEL_DIR)
+#define select_ep_out		(EP_SEL_EPNO(p))
+
+/* EP_TRADDR - bitmasks */
+/* Transfer Ring address. */
+#define EP_TRADDR_TRADDR(p)	((p))
+
+/* EP_CFG - bitmasks */
+/* Endpoint enable */
+#define EP_CFG_ENABLE		BIT(0)
+/*
+ *  Endpoint type.
+ * 1 - isochronous
+ * 2 - bulk
+ * 3 - interrupt
+ */
+#define EP_CFG_EPTYPE_MASK	GENMASK(2, 1)
+#define EP_CFG_EPTYPE(p)	(((p) << 1)  & EP_CFG_EPTYPE_MASK)
+/* Stream support enable (only in SS mode). */
+#define EP_CFG_STREAM_EN	BIT(3)
+/* TDL check (only in SS mode for BULK EP). */
+#define EP_CFG_TDL_CHK		BIT(4)
+/* SID check (only in SS mode for BULK OUT EP). */
+#define EP_CFG_SID_CHK		BIT(5)
+/* DMA transfer endianness. */
+#define EP_CFG_EPENDIAN		BIT(7)
+/* Max burst size (used only in SS mode). */
+#define EP_CFG_MAXBURST_MASK	GENMASK(11, 8)
+#define EP_CFG_MAXBURST(p)	(((p) << 8) & EP_CFG_MAXBURST_MASK)
+#define EP_CFG_MAXBURST_MAX	15
+/* ISO max burst. */
+#define EP_CFG_MULT_MASK	GENMASK(15, 14)
+#define EP_CFG_MULT(p)		(((p) << 14) & EP_CFG_MULT_MASK)
+#define EP_CFG_MULT_MAX		2
+/* ISO max burst. */
+#define EP_CFG_MAXPKTSIZE_MASK	GENMASK(26, 16)
+#define EP_CFG_MAXPKTSIZE(p)	(((p) << 16) & EP_CFG_MAXPKTSIZE_MASK)
+/* Max number of buffered packets. */
+#define EP_CFG_BUFFERING_MASK	GENMASK(31, 27)
+#define EP_CFG_BUFFERING(p)	(((p) << 27) & EP_CFG_BUFFERING_MASK)
+#define EP_CFG_BUFFERING_MAX	15
+
+/* EP_CMD - bitmasks */
+/* Endpoint reset. */
+#define EP_CMD_EPRST		BIT(0)
+/* Endpoint STALL set. */
+#define EP_CMD_SSTALL		BIT(1)
+/* Endpoint STALL clear. */
+#define EP_CMD_CSTALL		BIT(2)
+/* Send ERDY TP. */
+#define EP_CMD_ERDY		BIT(3)
+/* Request complete. */
+#define EP_CMD_REQ_CMPL		BIT(5)
+/* Transfer descriptor ready. */
+#define EP_CMD_DRDY		BIT(6)
+/* Data flush. */
+#define EP_CMD_DFLUSH		BIT(7)
+/*
+ * Transfer Descriptor Length write  (used only for Bulk Stream capable
+ * endpoints in SS mode).
+ * Bit Removed from DEV_VER_V3 controller version.
+ */
+#define EP_CMD_STDL		BIT(8)
+/*
+ * Transfer Descriptor Length (used only in SS mode for bulk endpoints).
+ * Bits Removed from DEV_VER_V3 controller version.
+ */
+#define EP_CMD_TDL_MASK		GENMASK(15, 9)
+#define EP_CMD_TDL_SET(p)	(((p) << 9) & EP_CMD_TDL_MASK)
+#define EP_CMD_TDL_GET(p)	(((p) & EP_CMD_TDL_MASK) >> 9)
+#define EP_CMD_TDL_MAX		(EP_CMD_TDL_MASK >> 9)
+
+/* ERDY Stream ID value (used in SS mode). */
+#define EP_CMD_ERDY_SID_MASK	GENMASK(31, 16)
+#define EP_CMD_ERDY_SID(p)	(((p) << 16) & EP_CMD_ERDY_SID_MASK)
+
+/* EP_STS - bitmasks */
+/* Setup transfer complete. */
+#define EP_STS_SETUP		BIT(0)
+/* Endpoint STALL status. */
+#define EP_STS_STALL(p)		((p) & BIT(1))
+/* Interrupt On Complete. */
+#define EP_STS_IOC		BIT(2)
+/* Interrupt on Short Packet. */
+#define EP_STS_ISP		BIT(3)
+/* Transfer descriptor missing. */
+#define EP_STS_DESCMIS		BIT(4)
+/* Stream Rejected (used only in SS mode) */
+#define EP_STS_STREAMR		BIT(5)
+/* EXIT from MOVE DATA State (used only for stream transfers in SS mode). */
+#define EP_STS_MD_EXIT		BIT(6)
+/* TRB error. */
+#define EP_STS_TRBERR		BIT(7)
+/* Not ready (used only in SS mode). */
+#define EP_STS_NRDY		BIT(8)
+/* DMA busy bit. */
+#define EP_STS_DBUSY		BIT(9)
+/* Endpoint Buffer Empty */
+#define EP_STS_BUFFEMPTY(p)	((p) & BIT(10))
+/* Current Cycle Status */
+#define EP_STS_CCS(p)		((p) & BIT(11))
+/* Prime (used only in SS mode. */
+#define EP_STS_PRIME		BIT(12)
+/* Stream error (used only in SS mode). */
+#define EP_STS_SIDERR		BIT(13)
+/* OUT size mismatch. */
+#define EP_STS_OUTSMM		BIT(14)
+/* ISO transmission error. */
+#define EP_STS_ISOERR		BIT(15)
+/* Host Packet Pending (only for SS mode). */
+#define EP_STS_HOSTPP(p)	((p) & BIT(16))
+/* Stream Protocol State Machine State (only for Bulk stream endpoints). */
+#define EP_STS_SPSMST_MASK		GENMASK(18, 17)
+#define EP_STS_SPSMST_DISABLED(p)	(((p) & EP_STS_SPSMST_MASK) >> 17)
+#define EP_STS_SPSMST_IDLE(p)		(((p) & EP_STS_SPSMST_MASK) >> 17)
+#define EP_STS_SPSMST_START_STREAM(p)	(((p) & EP_STS_SPSMST_MASK) >> 17)
+#define EP_STS_SPSMST_MOVE_DATA(p)	(((p) & EP_STS_SPSMST_MASK) >> 17)
+/* Interrupt On Transfer complete. */
+#define EP_STS_IOT		BIT(19)
+/* OUT queue endpoint number. */
+#define EP_STS_OUTQ_NO_MASK	GENMASK(27, 24)
+#define EP_STS_OUTQ_NO(p)	(((p) & EP_STS_OUTQ_NO_MASK) >> 24)
+/* OUT queue valid flag. */
+#define EP_STS_OUTQ_VAL_MASK	BIT(28)
+#define EP_STS_OUTQ_VAL(p)	((p) & EP_STS_OUTQ_VAL_MASK)
+/* SETUP WAIT. */
+#define EP_STS_STPWAIT		BIT(31)
+
+/* EP_STS_SID - bitmasks */
+/* Stream ID (used only in SS mode). */
+#define EP_STS_SID_MASK		GENMASK(15, 0)
+#define EP_STS_SID(p)		((p) & EP_STS_SID_MASK)
+
+/* EP_STS_EN - bitmasks */
+/* SETUP interrupt enable. */
+#define EP_STS_EN_SETUPEN	BIT(0)
+/* OUT transfer missing descriptor enable. */
+#define EP_STS_EN_DESCMISEN	BIT(4)
+/* Stream Rejected enable. */
+#define EP_STS_EN_STREAMREN	BIT(5)
+/* Move Data Exit enable.*/
+#define EP_STS_EN_MD_EXITEN	BIT(6)
+/* TRB enable. */
+#define EP_STS_EN_TRBERREN	BIT(7)
+/* NRDY enable. */
+#define EP_STS_EN_NRDYEN	BIT(8)
+/* Prime enable. */
+#define EP_STS_EN_PRIMEEEN	BIT(12)
+/* Stream error enable. */
+#define EP_STS_EN_SIDERREN	BIT(13)
+/* OUT size mismatch enable. */
+#define EP_STS_EN_OUTSMMEN	BIT(14)
+/* ISO transmission error enable. */
+#define EP_STS_EN_ISOERREN	BIT(15)
+/* Interrupt on Transmission complete enable. */
+#define EP_STS_EN_IOTEN		BIT(19)
+/* Setup Wait interrupt enable. */
+#define EP_STS_EN_STPWAITEN	BIT(31)
+
+/* DRBL- bitmasks */
+#define DB_VALUE_BY_INDEX(index) (1 << (index))
+#define DB_VALUE_EP0_OUT	BIT(0)
+#define DB_VALUE_EP0_IN		BIT(16)
+
+/* EP_IEN - bitmasks */
+#define EP_IEN(index)		(1 << (index))
+#define EP_IEN_EP_OUT0		BIT(0)
+#define EP_IEN_EP_IN0		BIT(16)
+
+/* EP_ISTS - bitmasks */
+#define EP_ISTS(index)		(1 << (index))
+#define EP_ISTS_EP_OUT0		BIT(0)
+#define EP_ISTS_EP_IN0		BIT(16)
+
+/* USB_PWR- bitmasks */
+/*Power Shut Off capability enable*/
+#define PUSB_PWR_PSO_EN		BIT(0)
+/*Power Shut Off capability disable*/
+#define PUSB_PWR_PSO_DS		BIT(1)
+/*
+ * Enables turning-off Reference Clock.
+ * This bit is optional and implemented only when support for OTG is
+ * implemented (indicated by OTG_READY bit set to '1').
+ */
+#define PUSB_PWR_STB_CLK_SWITCH_EN	BIT(8)
+/*
+ * Status bit indicating that operation required by STB_CLK_SWITCH_EN write
+ * is completed
+ */
+#define PUSB_PWR_STB_CLK_SWITCH_DONE	BIT(9)
+/* This bit informs if Fast Registers Access is enabled. */
+#define PUSB_PWR_FST_REG_ACCESS_STAT	BIT(30)
+/* Fast Registers Access Enable. */
+#define PUSB_PWR_FST_REG_ACCESS		BIT(31)
+
+/* USB_CONF2- bitmasks */
+/*
+ * Writing 1 disables TDL calculation basing on TRB feature in controller
+ * for DMULT mode.
+ * Bit supported only for DEV_VER_V2 version.
+ */
+#define USB_CONF2_DIS_TDL_TRB		BIT(1)
+/*
+ * Writing 1 enables TDL calculation basing on TRB feature in controller
+ * for DMULT mode.
+ * Bit supported only for DEV_VER_V2 version.
+ */
+#define USB_CONF2_EN_TDL_TRB		BIT(2)
+
+/* USB_CAP1- bitmasks */
+/*
+ * SFR Interface type
+ * These field reflects type of SFR interface implemented:
+ * 0x0 - OCP
+ * 0x1 - AHB,
+ * 0x2 - PLB
+ * 0x3 - AXI
+ * 0x4-0xF - reserved
+ */
+#define USB_CAP1_SFR_TYPE_MASK	GENMASK(3, 0)
+#define DEV_SFR_TYPE_OCP(p)	(((p) & USB_CAP1_SFR_TYPE_MASK) == 0x0)
+#define DEV_SFR_TYPE_AHB(p)	(((p) & USB_CAP1_SFR_TYPE_MASK) == 0x1)
+#define DEV_SFR_TYPE_PLB(p)	(((p) & USB_CAP1_SFR_TYPE_MASK) == 0x2)
+#define DEV_SFR_TYPE_AXI(p)	(((p) & USB_CAP1_SFR_TYPE_MASK) == 0x3)
+/*
+ * SFR Interface width
+ * These field reflects width of SFR interface implemented:
+ * 0x0 - 8 bit interface,
+ * 0x1 - 16 bit interface,
+ * 0x2 - 32 bit interface
+ * 0x3 - 64 bit interface
+ * 0x4-0xF - reserved
+ */
+#define USB_CAP1_SFR_WIDTH_MASK	GENMASK(7, 4)
+#define DEV_SFR_WIDTH_8(p)	(((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x0 << 4))
+#define DEV_SFR_WIDTH_16(p)	(((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x1 << 4))
+#define DEV_SFR_WIDTH_32(p)	(((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x2 << 4))
+#define DEV_SFR_WIDTH_64(p)	(((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x3 << 4))
+/*
+ * DMA Interface type
+ * These field reflects type of DMA interface implemented:
+ * 0x0 - OCP
+ * 0x1 - AHB,
+ * 0x2 - PLB
+ * 0x3 - AXI
+ * 0x4-0xF - reserved
+ */
+#define USB_CAP1_DMA_TYPE_MASK	GENMASK(11, 8)
+#define DEV_DMA_TYPE_OCP(p)	(((p) & USB_CAP1_DMA_TYPE_MASK) == (0x0 << 8))
+#define DEV_DMA_TYPE_AHB(p)	(((p) & USB_CAP1_DMA_TYPE_MASK) == (0x1 << 8))
+#define DEV_DMA_TYPE_PLB(p)	(((p) & USB_CAP1_DMA_TYPE_MASK) == (0x2 << 8))
+#define DEV_DMA_TYPE_AXI(p)	(((p) & USB_CAP1_DMA_TYPE_MASK) == (0x3 << 8))
+/*
+ * DMA Interface width
+ * These field reflects width of DMA interface implemented:
+ * 0x0 - reserved,
+ * 0x1 - reserved,
+ * 0x2 - 32 bit interface
+ * 0x3 - 64 bit interface
+ * 0x4-0xF - reserved
+ */
+#define USB_CAP1_DMA_WIDTH_MASK	GENMASK(15, 12)
+#define DEV_DMA_WIDTH_32(p)	(((p) & USB_CAP1_DMA_WIDTH_MASK) == (0x2 << 12))
+#define DEV_DMA_WIDTH_64(p)	(((p) & USB_CAP1_DMA_WIDTH_MASK) == (0x3 << 12))
+/*
+ * USB3 PHY Interface type
+ * These field reflects type of USB3 PHY interface implemented:
+ * 0x0 - USB PIPE,
+ * 0x1 - RMMI,
+ * 0x2-0xF - reserved
+ */
+#define USB_CAP1_U3PHY_TYPE_MASK GENMASK(19, 16)
+#define DEV_U3PHY_PIPE(p) (((p) & USB_CAP1_U3PHY_TYPE_MASK) == (0x0 << 16))
+#define DEV_U3PHY_RMMI(p) (((p) & USB_CAP1_U3PHY_TYPE_MASK) == (0x1 << 16))
+/*
+ * USB3 PHY Interface width
+ * These field reflects width of USB3 PHY interface implemented:
+ * 0x0 - 8 bit PIPE interface,
+ * 0x1 - 16 bit PIPE interface,
+ * 0x2 - 32 bit PIPE interface,
+ * 0x3 - 64 bit PIPE interface
+ * 0x4-0xF - reserved
+ * Note: When SSIC interface is implemented this field shows the width of
+ * internal PIPE interface. The RMMI interface is always 20bit wide.
+ */
+#define USB_CAP1_U3PHY_WIDTH_MASK GENMASK(23, 20)
+#define DEV_U3PHY_WIDTH_8(p) \
+	(((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x0 << 20))
+#define DEV_U3PHY_WIDTH_16(p) \
+	(((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x1 << 16))
+#define DEV_U3PHY_WIDTH_32(p) \
+	(((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x2 << 20))
+#define DEV_U3PHY_WIDTH_64(p) \
+	(((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x3 << 16))
+
+/*
+ * USB2 PHY Interface enable
+ * These field informs if USB2 PHY interface is implemented:
+ * 0x0 - interface NOT implemented,
+ * 0x1 - interface implemented
+ */
+#define USB_CAP1_U2PHY_EN(p)	((p) & BIT(24))
+/*
+ * USB2 PHY Interface type
+ * These field reflects type of USB2 PHY interface implemented:
+ * 0x0 - UTMI,
+ * 0x1 - ULPI
+ */
+#define DEV_U2PHY_ULPI(p)	((p) & BIT(25))
+/*
+ * USB2 PHY Interface width
+ * These field reflects width of USB2 PHY interface implemented:
+ * 0x0 - 8 bit interface,
+ * 0x1 - 16 bit interface,
+ * Note: The ULPI interface is always 8bit wide.
+ */
+#define DEV_U2PHY_WIDTH_16(p)	((p) & BIT(26))
+/*
+ * OTG Ready
+ * 0x0 - pure device mode
+ * 0x1 - some features and ports for CDNS USB OTG controller are implemented.
+ */
+#define USB_CAP1_OTG_READY(p)	((p) & BIT(27))
+
+/*
+ * When set, indicates that controller supports automatic internal TDL
+ * calculation basing on the size provided in TRB (TRB[22:17]) for DMULT mode
+ * Supported only for DEV_VER_V2 controller version.
+ */
+#define USB_CAP1_TDL_FROM_TRB(p)	((p) & BIT(28))
+
+/* USB_CAP2- bitmasks */
+/*
+ * The actual size of the connected On-chip RAM memory in kB:
+ * - 0 means 256 kB (max supported mem size)
+ * - value other than 0 reflects the mem size in kB
+ */
+#define USB_CAP2_ACTUAL_MEM_SIZE(p) ((p) & GENMASK(7, 0))
+/*
+ * Max supported mem size
+ * These field reflects width of on-chip RAM address bus width,
+ * which determines max supported mem size:
+ * 0x0-0x7 - reserved,
+ * 0x8 - support for 4kB mem,
+ * 0x9 - support for 8kB mem,
+ * 0xA - support for 16kB mem,
+ * 0xB - support for 32kB mem,
+ * 0xC - support for 64kB mem,
+ * 0xD - support for 128kB mem,
+ * 0xE - support for 256kB mem,
+ * 0xF - reserved
+ */
+#define USB_CAP2_MAX_MEM_SIZE(p) ((p) & GENMASK(11, 8))
+
+/* USB_CAP3- bitmasks */
+#define EP_IS_IMPLEMENTED(reg, index) ((reg) & (1 << (index)))
+
+/* USB_CAP4- bitmasks */
+#define EP_SUPPORT_ISO(reg, index) ((reg) & (1 << (index)))
+
+/* USB_CAP5- bitmasks */
+#define EP_SUPPORT_STREAM(reg, index) ((reg) & (1 << (index)))
+
+/* USB_CAP6- bitmasks */
+/* The USBSS-DEV Controller  Internal build number. */
+#define GET_DEV_BASE_VERSION(p) ((p) & GENMASK(23, 0))
+/* The USBSS-DEV Controller version number. */
+#define GET_DEV_CUSTOM_VERSION(p) ((p) & GENMASK(31, 24))
+
+#define DEV_VER_NXP_V1		0x00024502
+#define DEV_VER_TI_V1		0x00024509
+#define DEV_VER_V2		0x0002450C
+#define DEV_VER_V3		0x0002450d
+
+/* DBG_LINK1- bitmasks */
+/*
+ * LFPS_MIN_DET_U1_EXIT value This parameter configures the minimum
+ * time required for decoding the received LFPS as an LFPS.U1_Exit.
+ */
+#define DBG_LINK1_LFPS_MIN_DET_U1_EXIT(p)	((p) & GENMASK(7, 0))
+/*
+ * LFPS_MIN_GEN_U1_EXIT value This parameter configures the minimum time for
+ * phytxelecidle deassertion when LFPS.U1_Exit
+ */
+#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_MASK	GENMASK(15, 8)
+#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT(p)	(((p) << 8) & GENMASK(15, 8))
+/*
+ * RXDET_BREAK_DIS value This parameter configures terminating the Far-end
+ * Receiver termination detection sequence:
+ * 0: it is possible that USBSS_DEV will terminate Farend receiver
+ *    termination detection sequence
+ * 1: USBSS_DEV will not terminate Far-end receiver termination
+ *    detection sequence
+ */
+#define DBG_LINK1_RXDET_BREAK_DIS		BIT(16)
+/* LFPS_GEN_PING value This parameter configures the LFPS.Ping generation */
+#define DBG_LINK1_LFPS_GEN_PING(p)		(((p) << 17) & GENMASK(21, 17))
+/*
+ * Set the LFPS_MIN_DET_U1_EXIT value Writing '1' to this bit writes the
+ * LFPS_MIN_DET_U1_EXIT field value to the device. This bit is automatically
+ * cleared. Writing '0' has no effect
+ */
+#define DBG_LINK1_LFPS_MIN_DET_U1_EXIT_SET	BIT(24)
+/*
+ * Set the LFPS_MIN_GEN_U1_EXIT value. Writing '1' to this bit writes the
+ * LFPS_MIN_GEN_U1_EXIT field value to the device. This bit is automatically
+ * cleared. Writing '0' has no effect
+ */
+#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_SET	BIT(25)
+/*
+ * Set the RXDET_BREAK_DIS value Writing '1' to this bit writes
+ * the RXDET_BREAK_DIS field value to the device. This bit is automatically
+ * cleared. Writing '0' has no effect
+ */
+#define DBG_LINK1_RXDET_BREAK_DIS_SET		BIT(26)
+/*
+ * Set the LFPS_GEN_PING_SET value Writing '1' to this bit writes
+ * the LFPS_GEN_PING field value to the device. This bit is automatically
+ * cleared. Writing '0' has no effect."
+ */
+#define DBG_LINK1_LFPS_GEN_PING_SET		BIT(27)
+
+/* DMA_AXI_CTRL- bitmasks */
+/* The mawprot pin configuration. */
+#define DMA_AXI_CTRL_MARPROT(p) ((p) & GENMASK(2, 0))
+/* The marprot pin configuration. */
+#define DMA_AXI_CTRL_MAWPROT(p) (((p) & GENMASK(2, 0)) << 16)
+#define DMA_AXI_CTRL_NON_SECURE 0x02
+
+#define gadget_to_cdns3_device(g) (container_of(g, struct cdns3_device, gadget))
+
+#define ep_to_cdns3_ep(ep) (container_of(ep, struct cdns3_endpoint, endpoint))
+
+/*-------------------------------------------------------------------------*/
+/*
+ * USBSS-DEV DMA interface.
+ */
+#define TRBS_PER_SEGMENT	600
+
+#define ISO_MAX_INTERVAL	10
+
+#define MAX_TRB_LENGTH          BIT(16)
+
+#if TRBS_PER_SEGMENT < 2
+#error "Incorrect TRBS_PER_SEGMENT. Minimal Transfer Ring size is 2."
+#endif
+
+#define TRBS_PER_STREAM_SEGMENT 2
+
+#if TRBS_PER_STREAM_SEGMENT < 2
+#error "Incorrect TRBS_PER_STREAMS_SEGMENT. Minimal Transfer Ring size is 2."
+#endif
+
+/*
+ *Only for ISOC endpoints - maximum number of TRBs is calculated as
+ * pow(2, bInterval-1) * number of usb requests. It is limitation made by
+ * driver to save memory. Controller must prepare TRB for each ITP even
+ * if bInterval > 1. It's the reason why driver needs so many TRBs for
+ * isochronous endpoints.
+ */
+#define TRBS_PER_ISOC_SEGMENT	(ISO_MAX_INTERVAL * 8)
+
+#define GET_TRBS_PER_SEGMENT(ep_type) ((ep_type) == USB_ENDPOINT_XFER_ISOC ? \
+				      TRBS_PER_ISOC_SEGMENT : TRBS_PER_SEGMENT)
+/**
+ * struct cdns3_trb - represent Transfer Descriptor block.
+ * @buffer:	pointer to buffer data
+ * @length:	length of data
+ * @control:	control flags.
+ *
+ * This structure describes transfer block serviced by DMA module.
+ */
+struct cdns3_trb {
+	__le32 buffer;
+	__le32 length;
+	__le32 control;
+};
+
+#define TRB_SIZE		(sizeof(struct cdns3_trb))
+#define TRB_RING_SIZE		(TRB_SIZE * TRBS_PER_SEGMENT)
+#define TRB_STREAM_RING_SIZE	(TRB_SIZE * TRBS_PER_STREAM_SEGMENT)
+#define TRB_ISO_RING_SIZE	(TRB_SIZE * TRBS_PER_ISOC_SEGMENT)
+#define TRB_CTRL_RING_SIZE	(TRB_SIZE * 2)
+
+/* TRB bit mask */
+#define TRB_TYPE_BITMASK	GENMASK(15, 10)
+#define TRB_TYPE(p)		((p) << 10)
+#define TRB_FIELD_TO_TYPE(p)	(((p) & TRB_TYPE_BITMASK) >> 10)
+
+/* TRB type IDs */
+/* bulk, interrupt, isoc , and control data stage */
+#define TRB_NORMAL		1
+/* TRB for linking ring segments */
+#define TRB_LINK		6
+
+/* Cycle bit - indicates TRB ownership by driver or hw*/
+#define TRB_CYCLE		BIT(0)
+/*
+ * When set to '1', the device will toggle its interpretation of the Cycle bit
+ */
+#define TRB_TOGGLE		BIT(1)
+/*
+ * The controller will set it if OUTSMM (OUT size mismatch) is detected,
+ * this bit is for normal TRB
+ */
+#define TRB_SMM			BIT(1)
+
+/*
+ * Short Packet (SP). OUT EPs at DMULT=1 only. Indicates if the TRB was
+ * processed while USB short packet was received. No more buffers defined by
+ * the TD will be used. DMA will automatically advance to next TD.
+ * - Shall be set to 0 by Software when putting TRB on the Transfer Ring
+ * - Shall be set to 1 by Controller when Short Packet condition for this TRB
+ *   is detected independent if ISP is set or not.
+ */
+#define TRB_SP			BIT(1)
+
+/* Interrupt on short packet*/
+#define TRB_ISP			BIT(2)
+/*Setting this bit enables FIFO DMA operation mode*/
+#define TRB_FIFO_MODE		BIT(3)
+/* Set PCIe no snoop attribute */
+#define TRB_CHAIN		BIT(4)
+/* Interrupt on completion */
+#define TRB_IOC			BIT(5)
+
+/* stream ID bitmasks. */
+#define TRB_STREAM_ID_BITMASK		GENMASK(31, 16)
+#define TRB_STREAM_ID(p)		((p) << 16)
+#define TRB_FIELD_TO_STREAMID(p)	(((p) & TRB_STREAM_ID_BITMASK) >> 16)
+
+/* Size of TD expressed in USB packets for HS/FS mode. */
+#define TRB_TDL_HS_SIZE(p)	(((p) << 16) & GENMASK(31, 16))
+#define TRB_TDL_HS_SIZE_GET(p)	(((p) & GENMASK(31, 16)) >> 16)
+
+/* transfer_len bitmasks. */
+#define TRB_LEN(p)		((p) & GENMASK(16, 0))
+
+/* Size of TD expressed in USB packets for SS mode. */
+#define TRB_TDL_SS_SIZE(p)	(((p) << 17) & GENMASK(23, 17))
+#define TRB_TDL_SS_SIZE_GET(p)	(((p) & GENMASK(23, 17)) >> 17)
+
+/* transfer_len bitmasks - bits 31:24 */
+#define TRB_BURST_LEN(p)	((unsigned int)((p) << 24) & GENMASK(31, 24))
+#define TRB_BURST_LEN_GET(p)	(((p) & GENMASK(31, 24)) >> 24)
+
+/* Data buffer pointer bitmasks*/
+#define TRB_BUFFER(p)		((p) & GENMASK(31, 0))
+
+/*-------------------------------------------------------------------------*/
+/* Driver numeric constants */
+
+/* Such declaration should be added to ch9.h */
+#define USB_DEVICE_MAX_ADDRESS		127
+
+/* Endpoint init values */
+#define CDNS3_EP_MAX_PACKET_LIMIT	1024
+#define CDNS3_EP_MAX_STREAMS		15
+#define CDNS3_EP0_MAX_PACKET_LIMIT	512
+
+/* All endpoints including EP0 */
+#define CDNS3_ENDPOINTS_MAX_COUNT	32
+#define CDNS3_EP_ZLP_BUF_SIZE		1024
+
+#define CDNS3_MAX_NUM_DESCMISS_BUF	32
+#define CDNS3_DESCMIS_BUF_SIZE		2048	/* Bytes */
+#define CDNS3_WA2_NUM_BUFFERS		128
+/*-------------------------------------------------------------------------*/
+/* Used structs */
+
+struct cdns3_device;
+
+/**
+ * struct cdns3_endpoint - extended device side representation of USB endpoint.
+ * @endpoint: usb endpoint
+ * @pending_req_list: list of requests queuing on transfer ring.
+ * @deferred_req_list: list of requests waiting for queuing on transfer ring.
+ * @wa2_descmiss_req_list: list of requests internally allocated by driver.
+ * @trb_pool: transfer ring - array of transaction buffers
+ * @trb_pool_dma: dma address of transfer ring
+ * @cdns3_dev: device associated with this endpoint
+ * @name: a human readable name e.g. ep1out
+ * @flags: specify the current state of endpoint
+ * @descmis_req: internal transfer object used for getting data from on-chip
+ *     buffer. It can happen only if function driver doesn't send usb_request
+ *     object on time.
+ * @dir: endpoint direction
+ * @num: endpoint number (1 - 15)
+ * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK
+ * @interval: interval between packets used for ISOC endpoint.
+ * @free_trbs: number of free TRBs in transfer ring
+ * @num_trbs: number of all TRBs in transfer ring
+ * @alloc_ring_size: size of the allocated TRB ring
+ * @pcs: producer cycle state
+ * @ccs: consumer cycle state
+ * @enqueue: enqueue index in transfer ring
+ * @dequeue: dequeue index in transfer ring
+ * @trb_burst_size: number of burst used in trb.
+ */
+struct cdns3_endpoint {
+	struct usb_ep		endpoint;
+	struct list_head	pending_req_list;
+	struct list_head	deferred_req_list;
+	struct list_head	wa2_descmiss_req_list;
+	int			wa2_counter;
+
+	struct cdns3_trb	*trb_pool;
+	dma_addr_t		trb_pool_dma;
+
+	struct cdns3_device	*cdns3_dev;
+	char			name[20];
+
+#define EP_ENABLED		BIT(0)
+#define EP_STALLED		BIT(1)
+#define EP_STALL_PENDING	BIT(2)
+#define EP_WEDGE		BIT(3)
+#define EP_TRANSFER_STARTED	BIT(4)
+#define EP_UPDATE_EP_TRBADDR	BIT(5)
+#define EP_PENDING_REQUEST	BIT(6)
+#define EP_RING_FULL		BIT(7)
+#define EP_CLAIMED		BIT(8)
+#define EP_DEFERRED_DRDY	BIT(9)
+#define EP_QUIRK_ISO_OUT_EN	BIT(10)
+#define EP_QUIRK_END_TRANSFER	BIT(11)
+#define EP_QUIRK_EXTRA_BUF_DET	BIT(12)
+#define EP_QUIRK_EXTRA_BUF_EN	BIT(13)
+#define EP_TDLCHK_EN		BIT(15)
+#define EP_CONFIGURED		BIT(16)
+	u32			flags;
+
+	struct cdns3_request	*descmis_req;
+
+	u8			dir;
+	u8			num;
+	u8			type;
+	u8			mult;
+	u8			bMaxBurst;
+	u16			wMaxPacketSize;
+	int			interval;
+
+	int			free_trbs;
+	int			num_trbs;
+	int			alloc_ring_size;
+	u8			pcs;
+	u8			ccs;
+	int			enqueue;
+	int			dequeue;
+	u8			trb_burst_size;
+
+	unsigned int		wa1_set:1;
+	struct cdns3_trb	*wa1_trb;
+	unsigned int		wa1_trb_index;
+	unsigned int		wa1_cycle_bit:1;
+
+	/* Stream related */
+	unsigned int		use_streams:1;
+	unsigned int		prime_flag:1;
+	u32			ep_sts_pending;
+	u16			last_stream_id;
+	u16			pending_tdl;
+	unsigned int		stream_sg_idx;
+};
+
+/**
+ * struct cdns3_aligned_buf - represent aligned buffer used for DMA transfer
+ * @buf: aligned to 8 bytes data buffer. Buffer address used in
+ *       TRB shall be aligned to 8.
+ * @dma: dma address
+ * @size: size of buffer
+ * @in_use: inform if this buffer is associated with usb_request
+ * @list: used to adding instance of this object to list
+ */
+struct cdns3_aligned_buf {
+	void			*buf;
+	dma_addr_t		dma;
+	u32			size;
+	enum dma_data_direction dir;
+	unsigned		in_use:1;
+	struct list_head	list;
+};
+
+/**
+ * struct cdns3_request - extended device side representation of usb_request
+ *                        object .
+ * @request: generic usb_request object describing single I/O request.
+ * @priv_ep: extended representation of usb_ep object
+ * @trb: the first TRB association with this request
+ * @start_trb: number of the first TRB in transfer ring
+ * @end_trb: number of the last TRB in transfer ring
+ * @aligned_buf: object holds information about aligned buffer associated whit
+ *               this endpoint
+ * @flags: flag specifying special usage of request
+ * @list: used by internally allocated request to add to wa2_descmiss_req_list.
+ * @finished_trb: number of trb has already finished per request
+ * @num_of_trb: how many trbs in this request
+ */
+struct cdns3_request {
+	struct usb_request		request;
+	struct cdns3_endpoint		*priv_ep;
+	struct cdns3_trb		*trb;
+	int				start_trb;
+	int				end_trb;
+	struct cdns3_aligned_buf	*aligned_buf;
+#define REQUEST_PENDING			BIT(0)
+#define REQUEST_INTERNAL		BIT(1)
+#define REQUEST_INTERNAL_CH		BIT(2)
+#define REQUEST_ZLP			BIT(3)
+#define REQUEST_UNALIGNED		BIT(4)
+	u32				flags;
+	struct list_head		list;
+	int				finished_trb;
+	int				num_of_trb;
+};
+
+#define to_cdns3_request(r) (container_of(r, struct cdns3_request, request))
+
+/*Stages used during enumeration process.*/
+#define CDNS3_SETUP_STAGE		0x0
+#define CDNS3_DATA_STAGE		0x1
+#define CDNS3_STATUS_STAGE		0x2
+
+/**
+ * struct cdns3_device - represent USB device.
+ * @dev: pointer to device structure associated whit this controller
+ * @sysdev: pointer to the DMA capable device
+ * @gadget: device side representation of the peripheral controller
+ * @gadget_driver: pointer to the gadget driver
+ * @dev_ver: device controller version.
+ * @lock: for synchronizing
+ * @regs: base address for device side registers
+ * @setup_buf: used while processing usb control requests
+ * @setup_dma: dma address for setup_buf
+ * @zlp_buf - zlp buffer
+ * @ep0_stage: ep0 stage during enumeration process.
+ * @ep0_data_dir: direction for control transfer
+ * @eps: array of pointers to all endpoints with exclusion ep0
+ * @aligned_buf_list: list of aligned buffers internally allocated by driver
+ * @aligned_buf_wq: workqueue freeing  no longer used aligned buf.
+ * @selected_ep: actually selected endpoint. It's used only to improve
+ *               performance.
+ * @isoch_delay: value from Set Isoch Delay request. Only valid on SS/SSP.
+ * @u1_allowed: allow device transition to u1 state
+ * @u2_allowed: allow device transition to u2 state
+ * @is_selfpowered: device is self powered
+ * @setup_pending: setup packet is processing by gadget driver
+ * @hw_configured_flag: hardware endpoint configuration was set.
+ * @wake_up_flag: allow device to remote up the host
+ * @status_completion_no_call: indicate that driver is waiting for status s
+ *     stage completion. It's used in deferred SET_CONFIGURATION request.
+ * @onchip_buffers: number of available on-chip buffers.
+ * @onchip_used_size: actual size of on-chip memory assigned to endpoints.
+ * @pending_status_wq: workqueue handling status stage for deferred requests.
+ * @pending_status_request: request for which status stage was deferred
+ */
+struct cdns3_device {
+	struct device			*dev;
+	struct device			*sysdev;
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*gadget_driver;
+
+#define CDNS_REVISION_V0		0x00024501
+#define CDNS_REVISION_V1		0x00024509
+	u32				dev_ver;
+
+	/* generic spin-lock for drivers */
+	spinlock_t			lock;
+
+	struct cdns3_usb_regs		__iomem *regs;
+
+	struct dma_pool			*eps_dma_pool;
+	struct usb_ctrlrequest		*setup_buf;
+	dma_addr_t			setup_dma;
+	void				*zlp_buf;
+
+	u8				ep0_stage;
+	int				ep0_data_dir;
+
+	struct cdns3_endpoint		*eps[CDNS3_ENDPOINTS_MAX_COUNT];
+
+	struct list_head		aligned_buf_list;
+	struct work_struct		aligned_buf_wq;
+
+	u32				selected_ep;
+	u16				isoch_delay;
+
+	unsigned			wait_for_setup:1;
+	unsigned			u1_allowed:1;
+	unsigned			u2_allowed:1;
+	unsigned			is_selfpowered:1;
+	unsigned			setup_pending:1;
+	unsigned			hw_configured_flag:1;
+	unsigned			wake_up_flag:1;
+	unsigned			status_completion_no_call:1;
+	unsigned			using_streams:1;
+	int				out_mem_is_allocated;
+
+	struct work_struct		pending_status_wq;
+	struct usb_request		*pending_status_request;
+
+	/*in KB */
+	u16				onchip_buffers;
+	u16				onchip_used_size;
+
+	u16				ep_buf_size;
+	u16				ep_iso_burst;
+};
+
+void cdns3_set_register_bit(void __iomem *ptr, u32 mask);
+dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep,
+				 struct cdns3_trb *trb);
+enum usb_device_speed cdns3_get_speed(struct cdns3_device *priv_dev);
+void cdns3_pending_setup_status_handler(struct work_struct *work);
+void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev);
+void cdns3_set_hw_configuration(struct cdns3_device *priv_dev);
+void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep);
+void cdns3_allow_enable_l1(struct cdns3_device *priv_dev, int enable);
+struct usb_request *cdns3_next_request(struct list_head *list);
+void cdns3_rearm_transfer(struct cdns3_endpoint *priv_ep, u8 rearm);
+int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep);
+u8 cdns3_ep_addr_to_index(u8 ep_addr);
+int cdns3_gadget_ep_set_wedge(struct usb_ep *ep);
+int cdns3_gadget_ep_set_halt(struct usb_ep *ep, int value);
+void __cdns3_gadget_ep_set_halt(struct cdns3_endpoint *priv_ep);
+int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep);
+struct usb_request *cdns3_gadget_ep_alloc_request(struct usb_ep *ep,
+						  gfp_t gfp_flags);
+void cdns3_gadget_ep_free_request(struct usb_ep *ep,
+				  struct usb_request *request);
+int cdns3_gadget_ep_dequeue(struct usb_ep *ep, struct usb_request *request);
+void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep,
+			   struct cdns3_request *priv_req,
+			   int status);
+
+int cdns3_init_ep0(struct cdns3_device *priv_dev,
+		   struct cdns3_endpoint *priv_ep);
+void cdns3_ep0_config(struct cdns3_device *priv_dev);
+int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable);
+void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir);
+int __cdns3_gadget_wakeup(struct cdns3_device *priv_dev);
+
+#endif /* __LINUX_CDNS3_GADGET */
diff --git a/drivers/usb/cdns3/cdns3-imx.c b/drivers/usb/cdns3/cdns3-imx.c
new file mode 100644
index 000000000..59860d175
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-imx.c
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cdns3-imx.c - NXP i.MX specific Glue layer for Cadence USB Controller
+ *
+ * Copyright (C) 2019 NXP
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/iopoll.h>
+#include <linux/pm_runtime.h>
+#include "core.h"
+
+#define USB3_CORE_CTRL1    0x00
+#define USB3_CORE_CTRL2    0x04
+#define USB3_INT_REG       0x08
+#define USB3_CORE_STATUS   0x0c
+#define XHCI_DEBUG_LINK_ST 0x10
+#define XHCI_DEBUG_BUS     0x14
+#define USB3_SSPHY_CTRL1   0x40
+#define USB3_SSPHY_CTRL2   0x44
+#define USB3_SSPHY_STATUS  0x4c
+#define USB2_PHY_CTRL1     0x50
+#define USB2_PHY_CTRL2     0x54
+#define USB2_PHY_STATUS    0x5c
+
+/* Register bits definition */
+
+/* USB3_CORE_CTRL1 */
+#define SW_RESET_MASK	GENMASK(31, 26)
+#define PWR_SW_RESET	BIT(31)
+#define APB_SW_RESET	BIT(30)
+#define AXI_SW_RESET	BIT(29)
+#define RW_SW_RESET	BIT(28)
+#define PHY_SW_RESET	BIT(27)
+#define PHYAHB_SW_RESET	BIT(26)
+#define ALL_SW_RESET	(PWR_SW_RESET | APB_SW_RESET | AXI_SW_RESET | \
+		RW_SW_RESET | PHY_SW_RESET | PHYAHB_SW_RESET)
+#define OC_DISABLE	BIT(9)
+#define MDCTRL_CLK_SEL	BIT(7)
+#define MODE_STRAP_MASK	(0x7)
+#define DEV_MODE	(1 << 2)
+#define HOST_MODE	(1 << 1)
+#define OTG_MODE	(1 << 0)
+
+/* USB3_INT_REG */
+#define CLK_125_REQ	BIT(29)
+#define LPM_CLK_REQ	BIT(28)
+#define DEVU3_WAEKUP_EN	BIT(14)
+#define OTG_WAKEUP_EN	BIT(12)
+#define DEV_INT_EN	(3 << 8) /* DEV INT b9:8 */
+#define HOST_INT1_EN	(1 << 0) /* HOST INT b7:0 */
+
+/* USB3_CORE_STATUS */
+#define MDCTRL_CLK_STATUS	BIT(15)
+#define DEV_POWER_ON_READY	BIT(13)
+#define HOST_POWER_ON_READY	BIT(12)
+
+/* USB3_SSPHY_STATUS */
+#define CLK_VALID_MASK		(0x3f << 26)
+#define CLK_VALID_COMPARE_BITS	(0xf << 28)
+#define PHY_REFCLK_REQ		(1 << 0)
+
+/* OTG registers definition */
+#define OTGSTS		0x4
+/* OTGSTS */
+#define OTG_NRDY	BIT(11)
+
+/* xHCI registers definition  */
+#define XECP_PM_PMCSR		0x8018
+#define XECP_AUX_CTRL_REG1	0x8120
+
+/* Register bits definition */
+/* XECP_AUX_CTRL_REG1 */
+#define CFG_RXDET_P3_EN		BIT(15)
+
+/* XECP_PM_PMCSR */
+#define PS_MASK			GENMASK(1, 0)
+#define PS_D0			0
+#define PS_D1			1
+
+struct cdns_imx {
+	struct device *dev;
+	void __iomem *noncore;
+	struct clk_bulk_data *clks;
+	int num_clks;
+	struct platform_device *cdns3_pdev;
+};
+
+static inline u32 cdns_imx_readl(struct cdns_imx *data, u32 offset)
+{
+	return readl(data->noncore + offset);
+}
+
+static inline void cdns_imx_writel(struct cdns_imx *data, u32 offset, u32 value)
+{
+	writel(value, data->noncore + offset);
+}
+
+static const struct clk_bulk_data imx_cdns3_core_clks[] = {
+	{ .id = "usb3_lpm_clk" },
+	{ .id = "usb3_bus_clk" },
+	{ .id = "usb3_aclk" },
+	{ .id = "usb3_ipg_clk" },
+	{ .id = "usb3_core_pclk" },
+};
+
+static int cdns_imx_noncore_init(struct cdns_imx *data)
+{
+	u32 value;
+	int ret;
+	struct device *dev = data->dev;
+
+	cdns_imx_writel(data, USB3_SSPHY_STATUS, CLK_VALID_MASK);
+	udelay(1);
+	ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
+		(value & CLK_VALID_COMPARE_BITS) == CLK_VALID_COMPARE_BITS,
+		10, 100000);
+	if (ret) {
+		dev_err(dev, "wait clkvld timeout\n");
+		return ret;
+	}
+
+	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+	value |= ALL_SW_RESET;
+	cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+	udelay(1);
+
+	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+	value = (value & ~MODE_STRAP_MASK) | OTG_MODE | OC_DISABLE;
+	cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+
+	value = cdns_imx_readl(data, USB3_INT_REG);
+	value |= HOST_INT1_EN | DEV_INT_EN;
+	cdns_imx_writel(data, USB3_INT_REG, value);
+
+	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+	value &= ~ALL_SW_RESET;
+	cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+	return ret;
+}
+
+static int cdns_imx_platform_suspend(struct device *dev,
+	bool suspend, bool wakeup);
+static struct cdns3_platform_data cdns_imx_pdata = {
+	.platform_suspend = cdns_imx_platform_suspend,
+	.quirks		  = CDNS3_DEFAULT_PM_RUNTIME_ALLOW,
+};
+
+static const struct of_dev_auxdata cdns_imx_auxdata[] = {
+	{
+		.compatible = "cdns,usb3",
+		.platform_data = &cdns_imx_pdata,
+	},
+	{},
+};
+
+static int cdns_imx_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct cdns_imx *data;
+	int ret;
+
+	if (!node)
+		return -ENODEV;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, data);
+	data->dev = dev;
+	data->noncore = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(data->noncore)) {
+		dev_err(dev, "can't map IOMEM resource\n");
+		return PTR_ERR(data->noncore);
+	}
+
+	data->num_clks = ARRAY_SIZE(imx_cdns3_core_clks);
+	data->clks = devm_kmemdup(dev, imx_cdns3_core_clks,
+				sizeof(imx_cdns3_core_clks), GFP_KERNEL);
+	if (!data->clks)
+		return -ENOMEM;
+
+	ret = devm_clk_bulk_get(dev, data->num_clks, data->clks);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
+	if (ret)
+		return ret;
+
+	ret = cdns_imx_noncore_init(data);
+	if (ret)
+		goto err;
+
+	ret = of_platform_populate(node, NULL, cdns_imx_auxdata, dev);
+	if (ret) {
+		dev_err(dev, "failed to create children: %d\n", ret);
+		goto err;
+	}
+
+	device_set_wakeup_capable(dev, true);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return ret;
+err:
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+	return ret;
+}
+
+static int cdns_imx_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cdns_imx *data = dev_get_drvdata(dev);
+
+	pm_runtime_get_sync(dev);
+	of_platform_depopulate(dev);
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static void cdns3_set_wakeup(struct cdns_imx *data, bool enable)
+{
+	u32 value;
+
+	value = cdns_imx_readl(data, USB3_INT_REG);
+	if (enable)
+		value |= OTG_WAKEUP_EN | DEVU3_WAEKUP_EN;
+	else
+		value &= ~(OTG_WAKEUP_EN | DEVU3_WAEKUP_EN);
+
+	cdns_imx_writel(data, USB3_INT_REG, value);
+}
+
+static int cdns_imx_platform_suspend(struct device *dev,
+		bool suspend, bool wakeup)
+{
+	struct cdns *cdns = dev_get_drvdata(dev);
+	struct device *parent = dev->parent;
+	struct cdns_imx *data = dev_get_drvdata(parent);
+	void __iomem *otg_regs = (void __iomem *)(cdns->otg_regs);
+	void __iomem *xhci_regs = cdns->xhci_regs;
+	u32 value;
+	int ret = 0;
+
+	if (cdns->role != USB_ROLE_HOST)
+		return 0;
+
+	if (suspend) {
+		/* SW request low power when all usb ports allow to it ??? */
+		value = readl(xhci_regs + XECP_PM_PMCSR);
+		value &= ~PS_MASK;
+		value |= PS_D1;
+		writel(value, xhci_regs + XECP_PM_PMCSR);
+
+		/* mdctrl_clk_sel */
+		value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+		value |= MDCTRL_CLK_SEL;
+		cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+
+		/* wait for mdctrl_clk_status */
+		value = cdns_imx_readl(data, USB3_CORE_STATUS);
+		ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value,
+			(value & MDCTRL_CLK_STATUS) == MDCTRL_CLK_STATUS,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait mdctrl_clk_status timeout\n");
+
+		/* wait lpm_clk_req to be 0 */
+		value = cdns_imx_readl(data, USB3_INT_REG);
+		ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value,
+			(value & LPM_CLK_REQ) != LPM_CLK_REQ,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait lpm_clk_req timeout\n");
+
+		/* wait phy_refclk_req to be 0 */
+		value = cdns_imx_readl(data, USB3_SSPHY_STATUS);
+		ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
+			(value & PHY_REFCLK_REQ) != PHY_REFCLK_REQ,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait phy_refclk_req timeout\n");
+
+		cdns3_set_wakeup(data, wakeup);
+	} else {
+		cdns3_set_wakeup(data, false);
+
+		/* SW request D0 */
+		value = readl(xhci_regs + XECP_PM_PMCSR);
+		value &= ~PS_MASK;
+		value |= PS_D0;
+		writel(value, xhci_regs + XECP_PM_PMCSR);
+
+		/* clr CFG_RXDET_P3_EN */
+		value = readl(xhci_regs + XECP_AUX_CTRL_REG1);
+		value &= ~CFG_RXDET_P3_EN;
+		writel(value, xhci_regs + XECP_AUX_CTRL_REG1);
+
+		/* clear mdctrl_clk_sel */
+		value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+		value &= ~MDCTRL_CLK_SEL;
+		cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+
+		/* wait CLK_125_REQ to be 1 */
+		value = cdns_imx_readl(data, USB3_INT_REG);
+		ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value,
+			(value & CLK_125_REQ) == CLK_125_REQ,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait CLK_125_REQ timeout\n");
+
+		/* wait for mdctrl_clk_status is cleared */
+		value = cdns_imx_readl(data, USB3_CORE_STATUS);
+		ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value,
+			(value & MDCTRL_CLK_STATUS) != MDCTRL_CLK_STATUS,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait mdctrl_clk_status cleared timeout\n");
+
+		/* Wait until OTG_NRDY is 0 */
+		value = readl(otg_regs + OTGSTS);
+		ret = readl_poll_timeout(otg_regs + OTGSTS, value,
+			(value & OTG_NRDY) != OTG_NRDY,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait OTG ready timeout\n");
+	}
+
+	return ret;
+
+}
+
+static int cdns_imx_resume(struct device *dev)
+{
+	struct cdns_imx *data = dev_get_drvdata(dev);
+
+	return clk_bulk_prepare_enable(data->num_clks, data->clks);
+}
+
+static int cdns_imx_suspend(struct device *dev)
+{
+	struct cdns_imx *data = dev_get_drvdata(dev);
+
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+
+	return 0;
+}
+
+
+/* Indicate if the controller was power lost before */
+static inline bool cdns_imx_is_power_lost(struct cdns_imx *data)
+{
+	u32 value;
+
+	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+	if ((value & SW_RESET_MASK) == ALL_SW_RESET)
+		return true;
+	else
+		return false;
+}
+
+static int __maybe_unused cdns_imx_system_resume(struct device *dev)
+{
+	struct cdns_imx *data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = cdns_imx_resume(dev);
+	if (ret)
+		return ret;
+
+	if (cdns_imx_is_power_lost(data)) {
+		dev_dbg(dev, "resume from power lost\n");
+		ret = cdns_imx_noncore_init(data);
+		if (ret)
+			cdns_imx_suspend(dev);
+	}
+
+	return ret;
+}
+
+#else
+static int cdns_imx_platform_suspend(struct device *dev,
+	bool suspend, bool wakeup)
+{
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops cdns_imx_pm_ops = {
+	SET_RUNTIME_PM_OPS(cdns_imx_suspend, cdns_imx_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(cdns_imx_suspend, cdns_imx_system_resume)
+};
+
+static const struct of_device_id cdns_imx_of_match[] = {
+	{ .compatible = "fsl,imx8qm-usb3", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cdns_imx_of_match);
+
+static struct platform_driver cdns_imx_driver = {
+	.probe		= cdns_imx_probe,
+	.remove		= cdns_imx_remove,
+	.driver		= {
+		.name	= "cdns3-imx",
+		.of_match_table	= cdns_imx_of_match,
+		.pm	= &cdns_imx_pm_ops,
+	},
+};
+module_platform_driver(cdns_imx_driver);
+
+MODULE_ALIAS("platform:cdns3-imx");
+MODULE_AUTHOR("Peter Chen <peter.chen@nxp.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence USB3 i.MX Glue Layer");
diff --git a/drivers/usb/cdns3/cdns3-pci-wrap.c b/drivers/usb/cdns3/cdns3-pci-wrap.c
new file mode 100644
index 000000000..1f6320d98
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-pci-wrap.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS PCI Glue driver
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+struct cdns3_wrap {
+	struct platform_device *plat_dev;
+	struct resource dev_res[6];
+	int devfn;
+};
+
+#define RES_IRQ_HOST_ID		0
+#define RES_IRQ_PERIPHERAL_ID	1
+#define RES_IRQ_OTG_ID		2
+#define RES_HOST_ID		3
+#define RES_DEV_ID		4
+#define RES_DRD_ID		5
+
+#define PCI_BAR_HOST		0
+#define PCI_BAR_DEV		2
+#define PCI_BAR_OTG		0
+
+#define PCI_DEV_FN_HOST_DEVICE	0
+#define PCI_DEV_FN_OTG		1
+
+#define PCI_DRIVER_NAME		"cdns3-pci-usbss"
+#define PLAT_DRIVER_NAME	"cdns-usb3"
+
+#define CDNS_VENDOR_ID		0x17cd
+#define CDNS_DEVICE_ID		0x0100
+
+static struct pci_dev *cdns3_get_second_fun(struct pci_dev *pdev)
+{
+	struct pci_dev *func;
+
+	/*
+	 * Gets the second function.
+	 * It's little tricky, but this platform has two function.
+	 * The fist keeps resources for Host/Device while the second
+	 * keeps resources for DRD/OTG.
+	 */
+	func = pci_get_device(pdev->vendor, pdev->device, NULL);
+	if (unlikely(!func))
+		return NULL;
+
+	if (func->devfn == pdev->devfn) {
+		func = pci_get_device(pdev->vendor, pdev->device, func);
+		if (unlikely(!func))
+			return NULL;
+	}
+
+	if (func->devfn != PCI_DEV_FN_HOST_DEVICE &&
+	    func->devfn != PCI_DEV_FN_OTG) {
+		return NULL;
+	}
+
+	return func;
+}
+
+static int cdns3_pci_probe(struct pci_dev *pdev,
+			   const struct pci_device_id *id)
+{
+	struct platform_device_info plat_info;
+	struct cdns3_wrap *wrap;
+	struct resource *res;
+	struct pci_dev *func;
+	int err;
+
+	/*
+	 * for GADGET/HOST PCI (devfn) function number is 0,
+	 * for OTG PCI (devfn) function number is 1
+	 */
+	if (!id || (pdev->devfn != PCI_DEV_FN_HOST_DEVICE &&
+		    pdev->devfn != PCI_DEV_FN_OTG))
+		return -EINVAL;
+
+	func = cdns3_get_second_fun(pdev);
+	if (unlikely(!func))
+		return -EINVAL;
+
+	err = pcim_enable_device(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "Enabling PCI device has failed %d\n", err);
+		return err;
+	}
+
+	pci_set_master(pdev);
+
+	if (pci_is_enabled(func)) {
+		wrap = pci_get_drvdata(func);
+	} else {
+		wrap = kzalloc(sizeof(*wrap), GFP_KERNEL);
+		if (!wrap) {
+			pci_disable_device(pdev);
+			return -ENOMEM;
+		}
+	}
+
+	res = wrap->dev_res;
+
+	if (pdev->devfn == PCI_DEV_FN_HOST_DEVICE) {
+		/* function 0: host(BAR_0) + device(BAR_1).*/
+		dev_dbg(&pdev->dev, "Initialize Device resources\n");
+		res[RES_DEV_ID].start = pci_resource_start(pdev, PCI_BAR_DEV);
+		res[RES_DEV_ID].end =   pci_resource_end(pdev, PCI_BAR_DEV);
+		res[RES_DEV_ID].name = "dev";
+		res[RES_DEV_ID].flags = IORESOURCE_MEM;
+		dev_dbg(&pdev->dev, "USBSS-DEV physical base addr: %pa\n",
+			&res[RES_DEV_ID].start);
+
+		res[RES_HOST_ID].start = pci_resource_start(pdev, PCI_BAR_HOST);
+		res[RES_HOST_ID].end = pci_resource_end(pdev, PCI_BAR_HOST);
+		res[RES_HOST_ID].name = "xhci";
+		res[RES_HOST_ID].flags = IORESOURCE_MEM;
+		dev_dbg(&pdev->dev, "USBSS-XHCI physical base addr: %pa\n",
+			&res[RES_HOST_ID].start);
+
+		/* Interrupt for XHCI */
+		wrap->dev_res[RES_IRQ_HOST_ID].start = pdev->irq;
+		wrap->dev_res[RES_IRQ_HOST_ID].name = "host";
+		wrap->dev_res[RES_IRQ_HOST_ID].flags = IORESOURCE_IRQ;
+
+		/* Interrupt device. It's the same as for HOST. */
+		wrap->dev_res[RES_IRQ_PERIPHERAL_ID].start = pdev->irq;
+		wrap->dev_res[RES_IRQ_PERIPHERAL_ID].name = "peripheral";
+		wrap->dev_res[RES_IRQ_PERIPHERAL_ID].flags = IORESOURCE_IRQ;
+	} else {
+		res[RES_DRD_ID].start = pci_resource_start(pdev, PCI_BAR_OTG);
+		res[RES_DRD_ID].end =   pci_resource_end(pdev, PCI_BAR_OTG);
+		res[RES_DRD_ID].name = "otg";
+		res[RES_DRD_ID].flags = IORESOURCE_MEM;
+		dev_dbg(&pdev->dev, "USBSS-DRD physical base addr: %pa\n",
+			&res[RES_DRD_ID].start);
+
+		/* Interrupt for OTG/DRD. */
+		wrap->dev_res[RES_IRQ_OTG_ID].start = pdev->irq;
+		wrap->dev_res[RES_IRQ_OTG_ID].name = "otg";
+		wrap->dev_res[RES_IRQ_OTG_ID].flags = IORESOURCE_IRQ;
+	}
+
+	if (pci_is_enabled(func)) {
+		/* set up platform device info */
+		memset(&plat_info, 0, sizeof(plat_info));
+		plat_info.parent = &pdev->dev;
+		plat_info.fwnode = pdev->dev.fwnode;
+		plat_info.name = PLAT_DRIVER_NAME;
+		plat_info.id = pdev->devfn;
+		wrap->devfn  = pdev->devfn;
+		plat_info.res = wrap->dev_res;
+		plat_info.num_res = ARRAY_SIZE(wrap->dev_res);
+		plat_info.dma_mask = pdev->dma_mask;
+		/* register platform device */
+		wrap->plat_dev = platform_device_register_full(&plat_info);
+		if (IS_ERR(wrap->plat_dev)) {
+			pci_disable_device(pdev);
+			err = PTR_ERR(wrap->plat_dev);
+			kfree(wrap);
+			return err;
+		}
+	}
+
+	pci_set_drvdata(pdev, wrap);
+	return err;
+}
+
+static void cdns3_pci_remove(struct pci_dev *pdev)
+{
+	struct cdns3_wrap *wrap;
+	struct pci_dev *func;
+
+	func = cdns3_get_second_fun(pdev);
+
+	wrap = (struct cdns3_wrap *)pci_get_drvdata(pdev);
+	if (wrap->devfn == pdev->devfn)
+		platform_device_unregister(wrap->plat_dev);
+
+	if (!pci_is_enabled(func))
+		kfree(wrap);
+}
+
+static const struct pci_device_id cdns3_pci_ids[] = {
+	{ PCI_DEVICE(CDNS_VENDOR_ID, CDNS_DEVICE_ID), },
+	{ 0, }
+};
+
+static struct pci_driver cdns3_pci_driver = {
+	.name = PCI_DRIVER_NAME,
+	.id_table = cdns3_pci_ids,
+	.probe = cdns3_pci_probe,
+	.remove = cdns3_pci_remove,
+};
+
+module_pci_driver(cdns3_pci_driver);
+MODULE_DEVICE_TABLE(pci, cdns3_pci_ids);
+
+MODULE_AUTHOR("Pawel Laszczak <pawell@cadence.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence USBSS PCI wrapper");
diff --git a/drivers/usb/cdns3/cdns3-plat.c b/drivers/usb/cdns3/cdns3-plat.c
new file mode 100644
index 000000000..726b2e4f6
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-plat.c
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS DRD Driver.
+ *
+ * Copyright (C) 2018-2020 Cadence.
+ * Copyright (C) 2017-2018 NXP
+ * Copyright (C) 2019 Texas Instruments
+ *
+ *
+ * Author: Peter Chen <peter.chen@nxp.com>
+ *         Pawel Laszczak <pawell@cadence.com>
+ *         Roger Quadros <rogerq@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include "core.h"
+#include "gadget-export.h"
+#include "drd.h"
+
+static int set_phy_power_on(struct cdns *cdns)
+{
+	int ret;
+
+	ret = phy_power_on(cdns->usb2_phy);
+	if (ret)
+		return ret;
+
+	ret = phy_power_on(cdns->usb3_phy);
+	if (ret)
+		phy_power_off(cdns->usb2_phy);
+
+	return ret;
+}
+
+static void set_phy_power_off(struct cdns *cdns)
+{
+	phy_power_off(cdns->usb3_phy);
+	phy_power_off(cdns->usb2_phy);
+}
+
+/**
+ * cdns3_plat_probe - probe for cdns3 core device
+ * @pdev: Pointer to cdns3 core platform device
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+static int cdns3_plat_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource	*res;
+	struct cdns *cdns;
+	void __iomem *regs;
+	int ret;
+
+	cdns = devm_kzalloc(dev, sizeof(*cdns), GFP_KERNEL);
+	if (!cdns)
+		return -ENOMEM;
+
+	cdns->dev = dev;
+	cdns->pdata = dev_get_platdata(dev);
+
+	platform_set_drvdata(pdev, cdns);
+
+	ret = platform_get_irq_byname(pdev, "host");
+	if (ret < 0)
+		return ret;
+
+	cdns->xhci_res[0].start = ret;
+	cdns->xhci_res[0].end = ret;
+	cdns->xhci_res[0].flags = IORESOURCE_IRQ | irq_get_trigger_type(ret);
+	cdns->xhci_res[0].name = "host";
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "xhci");
+	if (!res) {
+		dev_err(dev, "couldn't get xhci resource\n");
+		return -ENXIO;
+	}
+
+	cdns->xhci_res[1] = *res;
+
+	cdns->dev_irq = platform_get_irq_byname(pdev, "peripheral");
+
+	if (cdns->dev_irq < 0)
+		return cdns->dev_irq;
+
+	regs = devm_platform_ioremap_resource_byname(pdev, "dev");
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+	cdns->dev_regs	= regs;
+
+	cdns->otg_irq = platform_get_irq_byname(pdev, "otg");
+	if (cdns->otg_irq < 0)
+		return cdns->otg_irq;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otg");
+	if (!res) {
+		dev_err(dev, "couldn't get otg resource\n");
+		return -ENXIO;
+	}
+
+	cdns->phyrst_a_enable = device_property_read_bool(dev, "cdns,phyrst-a-enable");
+
+	cdns->otg_res = *res;
+
+	cdns->wakeup_irq = platform_get_irq_byname_optional(pdev, "wakeup");
+	if (cdns->wakeup_irq == -EPROBE_DEFER)
+		return cdns->wakeup_irq;
+
+	if (cdns->wakeup_irq < 0) {
+		dev_dbg(dev, "couldn't get wakeup irq\n");
+		cdns->wakeup_irq = 0x0;
+	}
+
+	cdns->usb2_phy = devm_phy_optional_get(dev, "cdns3,usb2-phy");
+	if (IS_ERR(cdns->usb2_phy))
+		return PTR_ERR(cdns->usb2_phy);
+
+	ret = phy_init(cdns->usb2_phy);
+	if (ret)
+		return ret;
+
+	cdns->usb3_phy = devm_phy_optional_get(dev, "cdns3,usb3-phy");
+	if (IS_ERR(cdns->usb3_phy))
+		return PTR_ERR(cdns->usb3_phy);
+
+	ret = phy_init(cdns->usb3_phy);
+	if (ret)
+		goto err_phy3_init;
+
+	ret = set_phy_power_on(cdns);
+	if (ret)
+		goto err_phy_power_on;
+
+	cdns->gadget_init = cdns3_gadget_init;
+
+	ret = cdns_init(cdns);
+	if (ret)
+		goto err_cdns_init;
+
+	device_set_wakeup_capable(dev, true);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	if (!(cdns->pdata && (cdns->pdata->quirks & CDNS3_DEFAULT_PM_RUNTIME_ALLOW)))
+		pm_runtime_forbid(dev);
+
+	/*
+	 * The controller needs less time between bus and controller suspend,
+	 * and we also needs a small delay to avoid frequently entering low
+	 * power mode.
+	 */
+	pm_runtime_set_autosuspend_delay(dev, 20);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_use_autosuspend(dev);
+
+	return 0;
+
+err_cdns_init:
+	set_phy_power_off(cdns);
+err_phy_power_on:
+	phy_exit(cdns->usb3_phy);
+err_phy3_init:
+	phy_exit(cdns->usb2_phy);
+
+	return ret;
+}
+
+/**
+ * cdns3_plat_remove() - unbind drd driver and clean up
+ * @pdev: Pointer to Linux platform device
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+static int cdns3_plat_remove(struct platform_device *pdev)
+{
+	struct cdns *cdns = platform_get_drvdata(pdev);
+	struct device *dev = cdns->dev;
+
+	pm_runtime_get_sync(dev);
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
+	cdns_remove(cdns);
+	set_phy_power_off(cdns);
+	phy_exit(cdns->usb2_phy);
+	phy_exit(cdns->usb3_phy);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int cdns3_set_platform_suspend(struct device *dev,
+				      bool suspend, bool wakeup)
+{
+	struct cdns *cdns = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (cdns->pdata && cdns->pdata->platform_suspend)
+		ret = cdns->pdata->platform_suspend(dev, suspend, wakeup);
+
+	return ret;
+}
+
+static int cdns3_controller_suspend(struct device *dev, pm_message_t msg)
+{
+	struct cdns *cdns = dev_get_drvdata(dev);
+	bool wakeup;
+	unsigned long flags;
+
+	if (cdns->in_lpm)
+		return 0;
+
+	if (PMSG_IS_AUTO(msg))
+		wakeup = true;
+	else
+		wakeup = device_may_wakeup(dev);
+
+	cdns3_set_platform_suspend(cdns->dev, true, wakeup);
+	set_phy_power_off(cdns);
+	spin_lock_irqsave(&cdns->lock, flags);
+	cdns->in_lpm = true;
+	spin_unlock_irqrestore(&cdns->lock, flags);
+	dev_dbg(cdns->dev, "%s ends\n", __func__);
+
+	return 0;
+}
+
+static int cdns3_controller_resume(struct device *dev, pm_message_t msg)
+{
+	struct cdns *cdns = dev_get_drvdata(dev);
+	int ret;
+	unsigned long flags;
+
+	if (!cdns->in_lpm)
+		return 0;
+
+	if (cdns_power_is_lost(cdns)) {
+		phy_exit(cdns->usb2_phy);
+		ret = phy_init(cdns->usb2_phy);
+		if (ret)
+			return ret;
+
+		phy_exit(cdns->usb3_phy);
+		ret = phy_init(cdns->usb3_phy);
+		if (ret)
+			return ret;
+	}
+
+	ret = set_phy_power_on(cdns);
+	if (ret)
+		return ret;
+
+	cdns3_set_platform_suspend(cdns->dev, false, false);
+
+	spin_lock_irqsave(&cdns->lock, flags);
+	cdns_resume(cdns);
+	cdns->in_lpm = false;
+	spin_unlock_irqrestore(&cdns->lock, flags);
+	cdns_set_active(cdns, !PMSG_IS_AUTO(msg));
+	if (cdns->wakeup_pending) {
+		cdns->wakeup_pending = false;
+		enable_irq(cdns->wakeup_irq);
+	}
+	dev_dbg(cdns->dev, "%s ends\n", __func__);
+
+	return ret;
+}
+
+static int cdns3_plat_runtime_suspend(struct device *dev)
+{
+	return cdns3_controller_suspend(dev, PMSG_AUTO_SUSPEND);
+}
+
+static int cdns3_plat_runtime_resume(struct device *dev)
+{
+	return cdns3_controller_resume(dev, PMSG_AUTO_RESUME);
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int cdns3_plat_suspend(struct device *dev)
+{
+	struct cdns *cdns = dev_get_drvdata(dev);
+	int ret;
+
+	cdns_suspend(cdns);
+
+	ret = cdns3_controller_suspend(dev, PMSG_SUSPEND);
+	if (ret)
+		return ret;
+
+	if (device_may_wakeup(dev) && cdns->wakeup_irq)
+		enable_irq_wake(cdns->wakeup_irq);
+
+	return ret;
+}
+
+static int cdns3_plat_resume(struct device *dev)
+{
+	return cdns3_controller_resume(dev, PMSG_RESUME);
+}
+#endif /* CONFIG_PM_SLEEP */
+#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops cdns3_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(cdns3_plat_suspend, cdns3_plat_resume)
+	SET_RUNTIME_PM_OPS(cdns3_plat_runtime_suspend,
+			   cdns3_plat_runtime_resume, NULL)
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_cdns3_match[] = {
+	{ .compatible = "cdns,usb3" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_cdns3_match);
+#endif
+
+static struct platform_driver cdns3_driver = {
+	.probe		= cdns3_plat_probe,
+	.remove		= cdns3_plat_remove,
+	.driver		= {
+		.name	= "cdns-usb3",
+		.of_match_table	= of_match_ptr(of_cdns3_match),
+		.pm	= &cdns3_pm_ops,
+	},
+};
+
+module_platform_driver(cdns3_driver);
+
+MODULE_ALIAS("platform:cdns3");
+MODULE_AUTHOR("Pawel Laszczak <pawell@cadence.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence USB3 DRD Controller Driver");
diff --git a/drivers/usb/cdns3/cdns3-ti.c b/drivers/usb/cdns3/cdns3-ti.c
new file mode 100644
index 000000000..07c318770
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-ti.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cdns3-ti.c - TI specific Glue layer for Cadence USB Controller
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+
+/* USB Wrapper register offsets */
+#define USBSS_PID		0x0
+#define	USBSS_W1		0x4
+#define USBSS_STATIC_CONFIG	0x8
+#define USBSS_PHY_TEST		0xc
+#define	USBSS_DEBUG_CTRL	0x10
+#define	USBSS_DEBUG_INFO	0x14
+#define	USBSS_DEBUG_LINK_STATE	0x18
+#define	USBSS_DEVICE_CTRL	0x1c
+
+/* Wrapper 1 register bits */
+#define USBSS_W1_PWRUP_RST		BIT(0)
+#define USBSS_W1_OVERCURRENT_SEL	BIT(8)
+#define USBSS_W1_MODESTRAP_SEL		BIT(9)
+#define USBSS_W1_OVERCURRENT		BIT(16)
+#define USBSS_W1_MODESTRAP_MASK		GENMASK(18, 17)
+#define USBSS_W1_MODESTRAP_SHIFT	17
+#define USBSS_W1_USB2_ONLY		BIT(19)
+
+/* Static config register bits */
+#define USBSS1_STATIC_PLL_REF_SEL_MASK	GENMASK(8, 5)
+#define USBSS1_STATIC_PLL_REF_SEL_SHIFT	5
+#define USBSS1_STATIC_LOOPBACK_MODE_MASK	GENMASK(4, 3)
+#define USBSS1_STATIC_LOOPBACK_MODE_SHIFT	3
+#define USBSS1_STATIC_VBUS_SEL_MASK	GENMASK(2, 1)
+#define USBSS1_STATIC_VBUS_SEL_SHIFT	1
+#define USBSS1_STATIC_LANE_REVERSE	BIT(0)
+
+/* Modestrap modes */
+enum modestrap_mode { USBSS_MODESTRAP_MODE_NONE,
+		      USBSS_MODESTRAP_MODE_HOST,
+		      USBSS_MODESTRAP_MODE_PERIPHERAL};
+
+struct cdns_ti {
+	struct device *dev;
+	void __iomem *usbss;
+	unsigned usb2_only:1;
+	unsigned vbus_divider:1;
+	struct clk *usb2_refclk;
+	struct clk *lpm_clk;
+};
+
+static const int cdns_ti_rate_table[] = {	/* in KHZ */
+	9600,
+	10000,
+	12000,
+	19200,
+	20000,
+	24000,
+	25000,
+	26000,
+	38400,
+	40000,
+	58000,
+	50000,
+	52000,
+};
+
+static inline u32 cdns_ti_readl(struct cdns_ti *data, u32 offset)
+{
+	return readl(data->usbss + offset);
+}
+
+static inline void cdns_ti_writel(struct cdns_ti *data, u32 offset, u32 value)
+{
+	writel(value, data->usbss + offset);
+}
+
+static int cdns_ti_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = pdev->dev.of_node;
+	struct cdns_ti *data;
+	int error;
+	u32 reg;
+	int rate_code, i;
+	unsigned long rate;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, data);
+
+	data->dev = dev;
+
+	data->usbss = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(data->usbss)) {
+		dev_err(dev, "can't map IOMEM resource\n");
+		return PTR_ERR(data->usbss);
+	}
+
+	data->usb2_refclk = devm_clk_get(dev, "ref");
+	if (IS_ERR(data->usb2_refclk)) {
+		dev_err(dev, "can't get usb2_refclk\n");
+		return PTR_ERR(data->usb2_refclk);
+	}
+
+	data->lpm_clk = devm_clk_get(dev, "lpm");
+	if (IS_ERR(data->lpm_clk)) {
+		dev_err(dev, "can't get lpm_clk\n");
+		return PTR_ERR(data->lpm_clk);
+	}
+
+	rate = clk_get_rate(data->usb2_refclk);
+	rate /= 1000;	/* To KHz */
+	for (i = 0; i < ARRAY_SIZE(cdns_ti_rate_table); i++) {
+		if (cdns_ti_rate_table[i] == rate)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(cdns_ti_rate_table)) {
+		dev_err(dev, "unsupported usb2_refclk rate: %lu KHz\n", rate);
+		return -EINVAL;
+	}
+
+	rate_code = i;
+
+	pm_runtime_enable(dev);
+	error = pm_runtime_get_sync(dev);
+	if (error < 0) {
+		dev_err(dev, "pm_runtime_get_sync failed: %d\n", error);
+		goto err;
+	}
+
+	/* assert RESET */
+	reg = cdns_ti_readl(data, USBSS_W1);
+	reg &= ~USBSS_W1_PWRUP_RST;
+	cdns_ti_writel(data, USBSS_W1, reg);
+
+	/* set static config */
+	reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG);
+	reg &= ~USBSS1_STATIC_PLL_REF_SEL_MASK;
+	reg |= rate_code << USBSS1_STATIC_PLL_REF_SEL_SHIFT;
+
+	reg &= ~USBSS1_STATIC_VBUS_SEL_MASK;
+	data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
+	if (data->vbus_divider)
+		reg |= 1 << USBSS1_STATIC_VBUS_SEL_SHIFT;
+
+	cdns_ti_writel(data, USBSS_STATIC_CONFIG, reg);
+	reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG);
+
+	/* set USB2_ONLY mode if requested */
+	reg = cdns_ti_readl(data, USBSS_W1);
+	data->usb2_only = device_property_read_bool(dev, "ti,usb2-only");
+	if (data->usb2_only)
+		reg |= USBSS_W1_USB2_ONLY;
+
+	/* set default modestrap */
+	reg |= USBSS_W1_MODESTRAP_SEL;
+	reg &= ~USBSS_W1_MODESTRAP_MASK;
+	reg |= USBSS_MODESTRAP_MODE_NONE << USBSS_W1_MODESTRAP_SHIFT;
+	cdns_ti_writel(data, USBSS_W1, reg);
+
+	/* de-assert RESET */
+	reg |= USBSS_W1_PWRUP_RST;
+	cdns_ti_writel(data, USBSS_W1, reg);
+
+	error = of_platform_populate(node, NULL, NULL, dev);
+	if (error) {
+		dev_err(dev, "failed to create children: %d\n", error);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	pm_runtime_put_sync(data->dev);
+	pm_runtime_disable(data->dev);
+
+	return error;
+}
+
+static int cdns_ti_remove_core(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
+static int cdns_ti_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	device_for_each_child(dev, NULL, cdns_ti_remove_core);
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id cdns_ti_of_match[] = {
+	{ .compatible = "ti,j721e-usb", },
+	{ .compatible = "ti,am64-usb", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cdns_ti_of_match);
+
+static struct platform_driver cdns_ti_driver = {
+	.probe		= cdns_ti_probe,
+	.remove		= cdns_ti_remove,
+	.driver		= {
+		.name	= "cdns3-ti",
+		.of_match_table	= cdns_ti_of_match,
+	},
+};
+
+module_platform_driver(cdns_ti_driver);
+
+MODULE_ALIAS("platform:cdns3-ti");
+MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence USB3 TI Glue Layer");
diff --git a/drivers/usb/cdns3/cdns3-trace.c b/drivers/usb/cdns3/cdns3-trace.c
new file mode 100644
index 000000000..b9858acae
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-trace.c
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USBSS device controller driver Trace Support
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+
+#define CREATE_TRACE_POINTS
+#include "cdns3-trace.h"
diff --git a/drivers/usb/cdns3/cdns3-trace.h b/drivers/usb/cdns3/cdns3-trace.h
new file mode 100644
index 000000000..7574b4a62
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-trace.h
@@ -0,0 +1,567 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * USBSS device controller driver.
+ * Trace support header file.
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM cdns3
+
+#if !defined(__LINUX_CDNS3_TRACE) || defined(TRACE_HEADER_MULTI_READ)
+#define __LINUX_CDNS3_TRACE
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+#include <asm/byteorder.h>
+#include <linux/usb/ch9.h>
+#include "core.h"
+#include "cdns3-gadget.h"
+#include "cdns3-debug.h"
+
+#define CDNS3_MSG_MAX	500
+
+TRACE_EVENT(cdns3_halt,
+	TP_PROTO(struct cdns3_endpoint *ep_priv, u8 halt, u8 flush),
+	TP_ARGS(ep_priv, halt, flush),
+	TP_STRUCT__entry(
+		__string(name, ep_priv->name)
+		__field(u8, halt)
+		__field(u8, flush)
+	),
+	TP_fast_assign(
+		__assign_str(name, ep_priv->name);
+		__entry->halt = halt;
+		__entry->flush = flush;
+	),
+	TP_printk("Halt %s for %s: %s", __entry->flush ? " and flush" : "",
+		  __get_str(name), __entry->halt ? "set" : "cleared")
+);
+
+TRACE_EVENT(cdns3_wa1,
+	TP_PROTO(struct cdns3_endpoint *ep_priv, char *msg),
+	TP_ARGS(ep_priv, msg),
+	TP_STRUCT__entry(
+		__string(ep_name, ep_priv->name)
+		__string(msg, msg)
+	),
+	TP_fast_assign(
+		__assign_str(ep_name, ep_priv->name);
+		__assign_str(msg, msg);
+	),
+	TP_printk("WA1: %s %s", __get_str(ep_name), __get_str(msg))
+);
+
+TRACE_EVENT(cdns3_wa2,
+	TP_PROTO(struct cdns3_endpoint *ep_priv, char *msg),
+	TP_ARGS(ep_priv, msg),
+	TP_STRUCT__entry(
+		__string(ep_name, ep_priv->name)
+		__string(msg, msg)
+	),
+	TP_fast_assign(
+		__assign_str(ep_name, ep_priv->name);
+		__assign_str(msg, msg);
+	),
+	TP_printk("WA2: %s %s", __get_str(ep_name), __get_str(msg))
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_doorbell,
+	TP_PROTO(const char *ep_name, u32 ep_trbaddr),
+	TP_ARGS(ep_name, ep_trbaddr),
+	TP_STRUCT__entry(
+		__string(name, ep_name)
+		__field(u32, ep_trbaddr)
+	),
+	TP_fast_assign(
+		__assign_str(name, ep_name);
+		__entry->ep_trbaddr = ep_trbaddr;
+	),
+	TP_printk("%s, ep_trbaddr %08x", __get_str(name),
+		  __entry->ep_trbaddr)
+);
+
+DEFINE_EVENT(cdns3_log_doorbell, cdns3_doorbell_ep0,
+	TP_PROTO(const char *ep_name, u32 ep_trbaddr),
+	TP_ARGS(ep_name, ep_trbaddr)
+);
+
+DEFINE_EVENT(cdns3_log_doorbell, cdns3_doorbell_epx,
+	TP_PROTO(const char *ep_name, u32 ep_trbaddr),
+	TP_ARGS(ep_name, ep_trbaddr)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_usb_irq,
+	TP_PROTO(struct cdns3_device *priv_dev, u32 usb_ists),
+	TP_ARGS(priv_dev, usb_ists),
+	TP_STRUCT__entry(
+		__field(enum usb_device_speed, speed)
+		__field(u32, usb_ists)
+		__dynamic_array(char, str, CDNS3_MSG_MAX)
+	),
+	TP_fast_assign(
+		__entry->speed = cdns3_get_speed(priv_dev);
+		__entry->usb_ists = usb_ists;
+	),
+	TP_printk("%s", cdns3_decode_usb_irq(__get_str(str), __entry->speed,
+					     __entry->usb_ists))
+);
+
+DEFINE_EVENT(cdns3_log_usb_irq, cdns3_usb_irq,
+	TP_PROTO(struct cdns3_device *priv_dev, u32 usb_ists),
+	TP_ARGS(priv_dev, usb_ists)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_epx_irq,
+	TP_PROTO(struct cdns3_device *priv_dev, struct cdns3_endpoint *priv_ep),
+	TP_ARGS(priv_dev, priv_ep),
+	TP_STRUCT__entry(
+		__string(ep_name, priv_ep->name)
+		__field(u32, ep_sts)
+		__field(u32, ep_traddr)
+		__field(u32, ep_last_sid)
+		__field(u32, use_streams)
+		__dynamic_array(char, str, CDNS3_MSG_MAX)
+	),
+	TP_fast_assign(
+		__assign_str(ep_name, priv_ep->name);
+		__entry->ep_sts = readl(&priv_dev->regs->ep_sts);
+		__entry->ep_traddr = readl(&priv_dev->regs->ep_traddr);
+		__entry->ep_last_sid = priv_ep->last_stream_id;
+		__entry->use_streams = priv_ep->use_streams;
+	),
+	TP_printk("%s, ep_traddr: %08x ep_last_sid: %08x use_streams: %d",
+		  cdns3_decode_epx_irq(__get_str(str),
+				       __get_str(ep_name),
+				       __entry->ep_sts),
+		  __entry->ep_traddr,
+		  __entry->ep_last_sid,
+		  __entry->use_streams)
+);
+
+DEFINE_EVENT(cdns3_log_epx_irq, cdns3_epx_irq,
+	TP_PROTO(struct cdns3_device *priv_dev, struct cdns3_endpoint *priv_ep),
+	TP_ARGS(priv_dev, priv_ep)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_ep0_irq,
+	TP_PROTO(struct cdns3_device *priv_dev,  u32 ep_sts),
+	TP_ARGS(priv_dev, ep_sts),
+	TP_STRUCT__entry(
+		__field(int, ep_dir)
+		__field(u32, ep_sts)
+		__dynamic_array(char, str, CDNS3_MSG_MAX)
+	),
+	TP_fast_assign(
+		__entry->ep_dir = priv_dev->selected_ep;
+		__entry->ep_sts = ep_sts;
+	),
+	TP_printk("%s", cdns3_decode_ep0_irq(__get_str(str),
+					     __entry->ep_dir,
+					     __entry->ep_sts))
+);
+
+DEFINE_EVENT(cdns3_log_ep0_irq, cdns3_ep0_irq,
+	TP_PROTO(struct cdns3_device *priv_dev, u32 ep_sts),
+	TP_ARGS(priv_dev, ep_sts)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_ctrl,
+	TP_PROTO(struct usb_ctrlrequest *ctrl),
+	TP_ARGS(ctrl),
+	TP_STRUCT__entry(
+		__field(u8, bRequestType)
+		__field(u8, bRequest)
+		__field(u16, wValue)
+		__field(u16, wIndex)
+		__field(u16, wLength)
+		__dynamic_array(char, str, CDNS3_MSG_MAX)
+	),
+	TP_fast_assign(
+		__entry->bRequestType = ctrl->bRequestType;
+		__entry->bRequest = ctrl->bRequest;
+		__entry->wValue = le16_to_cpu(ctrl->wValue);
+		__entry->wIndex = le16_to_cpu(ctrl->wIndex);
+		__entry->wLength = le16_to_cpu(ctrl->wLength);
+	),
+	TP_printk("%s", usb_decode_ctrl(__get_str(str), CDNS3_MSG_MAX,
+					__entry->bRequestType,
+					__entry->bRequest, __entry->wValue,
+					__entry->wIndex, __entry->wLength)
+	)
+);
+
+DEFINE_EVENT(cdns3_log_ctrl, cdns3_ctrl_req,
+	TP_PROTO(struct usb_ctrlrequest *ctrl),
+	TP_ARGS(ctrl)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_request,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req),
+	TP_STRUCT__entry(
+		__string(name, req->priv_ep->name)
+		__field(struct cdns3_request *, req)
+		__field(void *, buf)
+		__field(unsigned int, actual)
+		__field(unsigned int, length)
+		__field(int, status)
+		__field(int, zero)
+		__field(int, short_not_ok)
+		__field(int, no_interrupt)
+		__field(int, start_trb)
+		__field(int, end_trb)
+		__field(int, flags)
+		__field(unsigned int, stream_id)
+	),
+	TP_fast_assign(
+		__assign_str(name, req->priv_ep->name);
+		__entry->req = req;
+		__entry->buf = req->request.buf;
+		__entry->actual = req->request.actual;
+		__entry->length = req->request.length;
+		__entry->status = req->request.status;
+		__entry->zero = req->request.zero;
+		__entry->short_not_ok = req->request.short_not_ok;
+		__entry->no_interrupt = req->request.no_interrupt;
+		__entry->start_trb = req->start_trb;
+		__entry->end_trb = req->end_trb;
+		__entry->flags = req->flags;
+		__entry->stream_id = req->request.stream_id;
+	),
+	TP_printk("%s: req: %p, req buff %p, length: %u/%u %s%s%s, status: %d,"
+		  " trb: [start:%d, end:%d], flags:%x SID: %u",
+		__get_str(name), __entry->req, __entry->buf, __entry->actual,
+		__entry->length,
+		__entry->zero ? "Z" : "z",
+		__entry->short_not_ok ? "S" : "s",
+		__entry->no_interrupt ? "I" : "i",
+		__entry->status,
+		__entry->start_trb,
+		__entry->end_trb,
+		__entry->flags,
+		__entry->stream_id
+	)
+);
+
+DEFINE_EVENT(cdns3_log_request, cdns3_alloc_request,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdns3_log_request, cdns3_free_request,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdns3_log_request, cdns3_ep_queue,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdns3_log_request, cdns3_ep_dequeue,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdns3_log_request, cdns3_gadget_giveback,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req)
+);
+
+TRACE_EVENT(cdns3_ep0_queue,
+	TP_PROTO(struct cdns3_device *dev_priv, struct usb_request *request),
+	TP_ARGS(dev_priv, request),
+	TP_STRUCT__entry(
+		__field(int, dir)
+		__field(int, length)
+	),
+	TP_fast_assign(
+		__entry->dir = dev_priv->ep0_data_dir;
+		__entry->length = request->length;
+	),
+	TP_printk("Queue to ep0%s length: %u", __entry->dir ? "in" : "out",
+		  __entry->length)
+);
+
+DECLARE_EVENT_CLASS(cdns3_stream_split_transfer_len,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req),
+	TP_STRUCT__entry(
+		__string(name, req->priv_ep->name)
+		__field(struct cdns3_request *, req)
+		__field(unsigned int, length)
+		__field(unsigned int, actual)
+		__field(unsigned int, stream_id)
+	),
+	TP_fast_assign(
+		__assign_str(name, req->priv_ep->name);
+		__entry->req = req;
+		__entry->actual = req->request.length;
+		__entry->length = req->request.actual;
+		__entry->stream_id = req->request.stream_id;
+	),
+	TP_printk("%s: req: %p,request length: %u actual length: %u  SID: %u",
+		  __get_str(name), __entry->req, __entry->length,
+		  __entry->actual, __entry->stream_id)
+);
+
+DEFINE_EVENT(cdns3_stream_split_transfer_len, cdns3_stream_transfer_split,
+	     TP_PROTO(struct cdns3_request *req),
+	     TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdns3_stream_split_transfer_len,
+	     cdns3_stream_transfer_split_next_part,
+	     TP_PROTO(struct cdns3_request *req),
+	     TP_ARGS(req)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_aligned_request,
+	TP_PROTO(struct cdns3_request *priv_req),
+	TP_ARGS(priv_req),
+	TP_STRUCT__entry(
+		__string(name, priv_req->priv_ep->name)
+		__field(struct usb_request *, req)
+		__field(void *, buf)
+		__field(dma_addr_t, dma)
+		__field(void *, aligned_buf)
+		__field(dma_addr_t, aligned_dma)
+		__field(u32, aligned_buf_size)
+	),
+	TP_fast_assign(
+		__assign_str(name, priv_req->priv_ep->name);
+		__entry->req = &priv_req->request;
+		__entry->buf = priv_req->request.buf;
+		__entry->dma = priv_req->request.dma;
+		__entry->aligned_buf = priv_req->aligned_buf->buf;
+		__entry->aligned_dma = priv_req->aligned_buf->dma;
+		__entry->aligned_buf_size = priv_req->aligned_buf->size;
+	),
+	TP_printk("%s: req: %p, req buf %p, dma %pad a_buf %p a_dma %pad, size %d",
+		__get_str(name), __entry->req, __entry->buf, &__entry->dma,
+		__entry->aligned_buf, &__entry->aligned_dma,
+		__entry->aligned_buf_size
+	)
+);
+
+DEFINE_EVENT(cdns3_log_aligned_request, cdns3_free_aligned_request,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdns3_log_aligned_request, cdns3_prepare_aligned_request,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_map_request,
+	TP_PROTO(struct cdns3_request *priv_req),
+	TP_ARGS(priv_req),
+	TP_STRUCT__entry(
+		__string(name, priv_req->priv_ep->name)
+		__field(struct usb_request *, req)
+		__field(void *, buf)
+		__field(dma_addr_t, dma)
+	),
+	TP_fast_assign(
+		__assign_str(name, priv_req->priv_ep->name);
+		__entry->req = &priv_req->request;
+		__entry->buf = priv_req->request.buf;
+		__entry->dma = priv_req->request.dma;
+	),
+	TP_printk("%s: req: %p, req buf %p, dma %p",
+		  __get_str(name), __entry->req, __entry->buf, &__entry->dma
+	)
+);
+DEFINE_EVENT(cdns3_log_map_request, cdns3_map_request,
+	     TP_PROTO(struct cdns3_request *req),
+	     TP_ARGS(req)
+);
+DEFINE_EVENT(cdns3_log_map_request, cdns3_mapped_request,
+	     TP_PROTO(struct cdns3_request *req),
+	     TP_ARGS(req)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_trb,
+	TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb),
+	TP_ARGS(priv_ep, trb),
+	TP_STRUCT__entry(
+		__string(name, priv_ep->name)
+		__field(struct cdns3_trb *, trb)
+		__field(u32, buffer)
+		__field(u32, length)
+		__field(u32, control)
+		__field(u32, type)
+		__field(unsigned int, last_stream_id)
+	),
+	TP_fast_assign(
+		__assign_str(name, priv_ep->name);
+		__entry->trb = trb;
+		__entry->buffer = le32_to_cpu(trb->buffer);
+		__entry->length = le32_to_cpu(trb->length);
+		__entry->control = le32_to_cpu(trb->control);
+		__entry->type = usb_endpoint_type(priv_ep->endpoint.desc);
+		__entry->last_stream_id = priv_ep->last_stream_id;
+	),
+	TP_printk("%s: trb %p, dma buf: 0x%08x, size: %ld, burst: %d ctrl: 0x%08x (%s%s%s%s%s%s%s) SID:%lu LAST_SID:%u",
+		__get_str(name), __entry->trb, __entry->buffer,
+		TRB_LEN(__entry->length),
+		(u8)TRB_BURST_LEN_GET(__entry->length),
+		__entry->control,
+		__entry->control & TRB_CYCLE ? "C=1, " : "C=0, ",
+		__entry->control & TRB_TOGGLE ? "T=1, " : "T=0, ",
+		__entry->control & TRB_ISP ? "ISP, " : "",
+		__entry->control & TRB_FIFO_MODE ? "FIFO, " : "",
+		__entry->control & TRB_CHAIN ? "CHAIN, " : "",
+		__entry->control & TRB_IOC ? "IOC, " : "",
+		TRB_FIELD_TO_TYPE(__entry->control) == TRB_NORMAL ? "Normal" : "LINK",
+		TRB_FIELD_TO_STREAMID(__entry->control),
+		__entry->last_stream_id
+	)
+);
+
+DEFINE_EVENT(cdns3_log_trb, cdns3_prepare_trb,
+	TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb),
+	TP_ARGS(priv_ep, trb)
+);
+
+DEFINE_EVENT(cdns3_log_trb, cdns3_complete_trb,
+	TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb),
+	TP_ARGS(priv_ep, trb)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_ring,
+	TP_PROTO(struct cdns3_endpoint *priv_ep),
+	TP_ARGS(priv_ep),
+	TP_STRUCT__entry(
+		__dynamic_array(u8, ring, TRB_RING_SIZE)
+		__dynamic_array(u8, priv_ep, sizeof(struct cdns3_endpoint))
+		__dynamic_array(char, buffer,
+				(TRBS_PER_SEGMENT * 65) + CDNS3_MSG_MAX)
+	),
+	TP_fast_assign(
+		memcpy(__get_dynamic_array(priv_ep), priv_ep,
+		       sizeof(struct cdns3_endpoint));
+		memcpy(__get_dynamic_array(ring), priv_ep->trb_pool,
+		       TRB_RING_SIZE);
+	),
+
+	TP_printk("%s",
+		  cdns3_dbg_ring((struct cdns3_endpoint *)__get_str(priv_ep),
+				 (struct cdns3_trb *)__get_str(ring),
+				 __get_str(buffer)))
+);
+
+DEFINE_EVENT(cdns3_log_ring, cdns3_ring,
+	TP_PROTO(struct cdns3_endpoint *priv_ep),
+	TP_ARGS(priv_ep)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_ep,
+	TP_PROTO(struct cdns3_endpoint *priv_ep),
+	TP_ARGS(priv_ep),
+	TP_STRUCT__entry(
+		__string(name, priv_ep->name)
+		__field(unsigned int, maxpacket)
+		__field(unsigned int, maxpacket_limit)
+		__field(unsigned int, max_streams)
+		__field(unsigned int, use_streams)
+		__field(unsigned int, maxburst)
+		__field(unsigned int, flags)
+		__field(unsigned int, dir)
+		__field(u8, enqueue)
+		__field(u8, dequeue)
+	),
+	TP_fast_assign(
+		__assign_str(name, priv_ep->name);
+		__entry->maxpacket = priv_ep->endpoint.maxpacket;
+		__entry->maxpacket_limit = priv_ep->endpoint.maxpacket_limit;
+		__entry->max_streams = priv_ep->endpoint.max_streams;
+		__entry->use_streams = priv_ep->use_streams;
+		__entry->maxburst = priv_ep->endpoint.maxburst;
+		__entry->flags = priv_ep->flags;
+		__entry->dir = priv_ep->dir;
+		__entry->enqueue = priv_ep->enqueue;
+		__entry->dequeue = priv_ep->dequeue;
+	),
+	TP_printk("%s: mps: %d/%d. streams: %d, stream enable: %d, burst: %d, "
+		  "enq idx: %d, deq idx: %d, flags %s%s%s%s%s%s%s%s, dir: %s",
+		__get_str(name), __entry->maxpacket,
+		__entry->maxpacket_limit, __entry->max_streams,
+		__entry->use_streams,
+		__entry->maxburst, __entry->enqueue,
+		__entry->dequeue,
+		__entry->flags & EP_ENABLED ? "EN | " : "",
+		__entry->flags & EP_STALLED ? "STALLED | " : "",
+		__entry->flags & EP_WEDGE ? "WEDGE | " : "",
+		__entry->flags & EP_TRANSFER_STARTED ? "STARTED | " : "",
+		__entry->flags & EP_UPDATE_EP_TRBADDR ? "UPD TRB | " : "",
+		__entry->flags & EP_PENDING_REQUEST ? "REQ PEN | " : "",
+		__entry->flags & EP_RING_FULL ? "RING FULL |" : "",
+		__entry->flags & EP_CLAIMED ?  "CLAIMED " : "",
+		__entry->dir ? "IN" : "OUT"
+	)
+);
+
+DEFINE_EVENT(cdns3_log_ep, cdns3_gadget_ep_enable,
+	TP_PROTO(struct cdns3_endpoint *priv_ep),
+	TP_ARGS(priv_ep)
+);
+
+DEFINE_EVENT(cdns3_log_ep, cdns3_gadget_ep_disable,
+	TP_PROTO(struct cdns3_endpoint *priv_ep),
+	TP_ARGS(priv_ep)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_request_handled,
+	TP_PROTO(struct cdns3_request *priv_req, int current_index,
+		 int handled),
+	TP_ARGS(priv_req, current_index, handled),
+	TP_STRUCT__entry(
+		__field(struct cdns3_request *, priv_req)
+		__field(unsigned int, dma_position)
+		__field(unsigned int, handled)
+		__field(unsigned int, dequeue_idx)
+		__field(unsigned int, enqueue_idx)
+		__field(unsigned int, start_trb)
+		__field(unsigned int, end_trb)
+	),
+	TP_fast_assign(
+		__entry->priv_req = priv_req;
+		__entry->dma_position = current_index;
+		__entry->handled = handled;
+		__entry->dequeue_idx = priv_req->priv_ep->dequeue;
+		__entry->enqueue_idx = priv_req->priv_ep->enqueue;
+		__entry->start_trb = priv_req->start_trb;
+		__entry->end_trb = priv_req->end_trb;
+	),
+	TP_printk("Req: %p %s, DMA pos: %d, ep deq: %d, ep enq: %d,"
+		  " start trb: %d, end trb: %d",
+		__entry->priv_req,
+		__entry->handled ? "handled" : "not handled",
+		__entry->dma_position, __entry->dequeue_idx,
+		__entry->enqueue_idx, __entry->start_trb,
+		__entry->end_trb
+	)
+);
+
+DEFINE_EVENT(cdns3_log_request_handled, cdns3_request_handled,
+	TP_PROTO(struct cdns3_request *priv_req, int current_index,
+		 int handled),
+	TP_ARGS(priv_req, current_index, handled)
+);
+#endif /* __LINUX_CDNS3_TRACE */
+
+/* this part must be outside header guard */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE cdns3-trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/usb/cdns3/cdnsp-debug.h b/drivers/usb/cdns3/cdnsp-debug.h
new file mode 100644
index 000000000..f0ca865cc
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-debug.h
@@ -0,0 +1,586 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence CDNSP DRD Driver.
+ *
+ * Copyright (C) 2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ */
+#ifndef __LINUX_CDNSP_DEBUG
+#define __LINUX_CDNSP_DEBUG
+
+static inline const char *cdnsp_trb_comp_code_string(u8 status)
+{
+	switch (status) {
+	case COMP_INVALID:
+		return "Invalid";
+	case COMP_SUCCESS:
+		return "Success";
+	case COMP_DATA_BUFFER_ERROR:
+		return "Data Buffer Error";
+	case COMP_BABBLE_DETECTED_ERROR:
+		return "Babble Detected";
+	case COMP_TRB_ERROR:
+		return "TRB Error";
+	case COMP_RESOURCE_ERROR:
+		return "Resource Error";
+	case COMP_NO_SLOTS_AVAILABLE_ERROR:
+		return "No Slots Available Error";
+	case COMP_INVALID_STREAM_TYPE_ERROR:
+		return "Invalid Stream Type Error";
+	case COMP_SLOT_NOT_ENABLED_ERROR:
+		return "Slot Not Enabled Error";
+	case COMP_ENDPOINT_NOT_ENABLED_ERROR:
+		return "Endpoint Not Enabled Error";
+	case COMP_SHORT_PACKET:
+		return "Short Packet";
+	case COMP_RING_UNDERRUN:
+		return "Ring Underrun";
+	case COMP_RING_OVERRUN:
+		return "Ring Overrun";
+	case COMP_VF_EVENT_RING_FULL_ERROR:
+		return "VF Event Ring Full Error";
+	case COMP_PARAMETER_ERROR:
+		return "Parameter Error";
+	case COMP_CONTEXT_STATE_ERROR:
+		return "Context State Error";
+	case COMP_EVENT_RING_FULL_ERROR:
+		return "Event Ring Full Error";
+	case COMP_INCOMPATIBLE_DEVICE_ERROR:
+		return "Incompatible Device Error";
+	case COMP_MISSED_SERVICE_ERROR:
+		return "Missed Service Error";
+	case COMP_COMMAND_RING_STOPPED:
+		return "Command Ring Stopped";
+	case COMP_COMMAND_ABORTED:
+		return "Command Aborted";
+	case COMP_STOPPED:
+		return "Stopped";
+	case COMP_STOPPED_LENGTH_INVALID:
+		return "Stopped - Length Invalid";
+	case COMP_STOPPED_SHORT_PACKET:
+		return "Stopped - Short Packet";
+	case COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR:
+		return "Max Exit Latency Too Large Error";
+	case COMP_ISOCH_BUFFER_OVERRUN:
+		return "Isoch Buffer Overrun";
+	case COMP_EVENT_LOST_ERROR:
+		return "Event Lost Error";
+	case COMP_UNDEFINED_ERROR:
+		return "Undefined Error";
+	case COMP_INVALID_STREAM_ID_ERROR:
+		return "Invalid Stream ID Error";
+	default:
+		return "Unknown!!";
+	}
+}
+
+static inline const char *cdnsp_trb_type_string(u8 type)
+{
+	switch (type) {
+	case TRB_NORMAL:
+		return "Normal";
+	case TRB_SETUP:
+		return "Setup Stage";
+	case TRB_DATA:
+		return "Data Stage";
+	case TRB_STATUS:
+		return "Status Stage";
+	case TRB_ISOC:
+		return "Isoch";
+	case TRB_LINK:
+		return "Link";
+	case TRB_EVENT_DATA:
+		return "Event Data";
+	case TRB_TR_NOOP:
+		return "No-Op";
+	case TRB_ENABLE_SLOT:
+		return "Enable Slot Command";
+	case TRB_DISABLE_SLOT:
+		return "Disable Slot Command";
+	case TRB_ADDR_DEV:
+		return "Address Device Command";
+	case TRB_CONFIG_EP:
+		return "Configure Endpoint Command";
+	case TRB_EVAL_CONTEXT:
+		return "Evaluate Context Command";
+	case TRB_RESET_EP:
+		return "Reset Endpoint Command";
+	case TRB_STOP_RING:
+		return "Stop Ring Command";
+	case TRB_SET_DEQ:
+		return "Set TR Dequeue Pointer Command";
+	case TRB_RESET_DEV:
+		return "Reset Device Command";
+	case TRB_FORCE_HEADER:
+		return "Force Header Command";
+	case TRB_CMD_NOOP:
+		return "No-Op Command";
+	case TRB_TRANSFER:
+		return "Transfer Event";
+	case TRB_COMPLETION:
+		return "Command Completion Event";
+	case TRB_PORT_STATUS:
+		return "Port Status Change Event";
+	case TRB_HC_EVENT:
+		return "Device Controller Event";
+	case TRB_MFINDEX_WRAP:
+		return "MFINDEX Wrap Event";
+	case TRB_ENDPOINT_NRDY:
+		return "Endpoint Not ready";
+	case TRB_HALT_ENDPOINT:
+		return "Halt Endpoint";
+	case TRB_FLUSH_ENDPOINT:
+		return "FLush Endpoint";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static inline const char *cdnsp_ring_type_string(enum cdnsp_ring_type type)
+{
+	switch (type) {
+	case TYPE_CTRL:
+		return "CTRL";
+	case TYPE_ISOC:
+		return "ISOC";
+	case TYPE_BULK:
+		return "BULK";
+	case TYPE_INTR:
+		return "INTR";
+	case TYPE_STREAM:
+		return "STREAM";
+	case TYPE_COMMAND:
+		return "CMD";
+	case TYPE_EVENT:
+		return "EVENT";
+	}
+
+	return "UNKNOWN";
+}
+
+static inline char *cdnsp_slot_state_string(u32 state)
+{
+	switch (state) {
+	case SLOT_STATE_ENABLED:
+		return "enabled/disabled";
+	case SLOT_STATE_DEFAULT:
+		return "default";
+	case SLOT_STATE_ADDRESSED:
+		return "addressed";
+	case SLOT_STATE_CONFIGURED:
+		return "configured";
+	default:
+		return "reserved";
+	}
+}
+
+static inline const char *cdnsp_decode_trb(char *str, size_t size, u32 field0,
+					   u32 field1, u32 field2, u32 field3)
+{
+	int ep_id = TRB_TO_EP_INDEX(field3) - 1;
+	int type = TRB_FIELD_TO_TYPE(field3);
+	unsigned int ep_num;
+	int ret;
+	u32 temp;
+
+	ep_num = DIV_ROUND_UP(ep_id, 2);
+
+	switch (type) {
+	case TRB_LINK:
+		ret = snprintf(str, size,
+			       "LINK %08x%08x intr %ld type '%s' flags %c:%c:%c:%c",
+			       field1, field0, GET_INTR_TARGET(field2),
+			       cdnsp_trb_type_string(type),
+			       field3 & TRB_IOC ? 'I' : 'i',
+			       field3 & TRB_CHAIN ? 'C' : 'c',
+			       field3 & TRB_TC ? 'T' : 't',
+			       field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_TRANSFER:
+	case TRB_COMPLETION:
+	case TRB_PORT_STATUS:
+	case TRB_HC_EVENT:
+		ret = snprintf(str, size,
+			       "ep%d%s(%d) type '%s' TRB %08x%08x status '%s'"
+			       " len %ld slot %ld flags %c:%c",
+			       ep_num, ep_id % 2 ? "out" : "in",
+			       TRB_TO_EP_INDEX(field3),
+			       cdnsp_trb_type_string(type), field1, field0,
+			       cdnsp_trb_comp_code_string(GET_COMP_CODE(field2)),
+			       EVENT_TRB_LEN(field2), TRB_TO_SLOT_ID(field3),
+			       field3 & EVENT_DATA ? 'E' : 'e',
+			       field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_MFINDEX_WRAP:
+		ret = snprintf(str, size, "%s: flags %c",
+			       cdnsp_trb_type_string(type),
+			       field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_SETUP:
+		ret = snprintf(str, size,
+			       "type '%s' bRequestType %02x bRequest %02x "
+			       "wValue %02x%02x wIndex %02x%02x wLength %d "
+			       "length %ld TD size %ld intr %ld Setup ID %ld "
+			       "flags %c:%c:%c",
+			       cdnsp_trb_type_string(type),
+			       field0 & 0xff,
+			       (field0 & 0xff00) >> 8,
+			       (field0 & 0xff000000) >> 24,
+			       (field0 & 0xff0000) >> 16,
+			       (field1 & 0xff00) >> 8,
+			       field1 & 0xff,
+			       (field1 & 0xff000000) >> 16 |
+			       (field1 & 0xff0000) >> 16,
+			       TRB_LEN(field2), GET_TD_SIZE(field2),
+			       GET_INTR_TARGET(field2),
+			       TRB_SETUPID_TO_TYPE(field3),
+			       field3 & TRB_IDT ? 'D' : 'd',
+			       field3 & TRB_IOC ? 'I' : 'i',
+			       field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_DATA:
+		ret = snprintf(str, size,
+			       "type '%s' Buffer %08x%08x length %ld TD size %ld "
+			       "intr %ld flags %c:%c:%c:%c:%c:%c:%c",
+			       cdnsp_trb_type_string(type),
+			       field1, field0, TRB_LEN(field2),
+			       GET_TD_SIZE(field2),
+			       GET_INTR_TARGET(field2),
+			       field3 & TRB_IDT ? 'D' : 'i',
+			       field3 & TRB_IOC ? 'I' : 'i',
+			       field3 & TRB_CHAIN ? 'C' : 'c',
+			       field3 & TRB_NO_SNOOP ? 'S' : 's',
+			       field3 & TRB_ISP ? 'I' : 'i',
+			       field3 & TRB_ENT ? 'E' : 'e',
+			       field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_STATUS:
+		ret = snprintf(str, size,
+			       "Buffer %08x%08x length %ld TD size %ld intr"
+			       "%ld type '%s' flags %c:%c:%c:%c",
+			       field1, field0, TRB_LEN(field2),
+			       GET_TD_SIZE(field2),
+			       GET_INTR_TARGET(field2),
+			       cdnsp_trb_type_string(type),
+			       field3 & TRB_IOC ? 'I' : 'i',
+			       field3 & TRB_CHAIN ? 'C' : 'c',
+			       field3 & TRB_ENT ? 'E' : 'e',
+			       field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_NORMAL:
+	case TRB_ISOC:
+	case TRB_EVENT_DATA:
+	case TRB_TR_NOOP:
+		ret = snprintf(str, size,
+			       "type '%s' Buffer %08x%08x length %ld "
+			       "TD size %ld intr %ld "
+			       "flags %c:%c:%c:%c:%c:%c:%c:%c:%c",
+			       cdnsp_trb_type_string(type),
+			       field1, field0, TRB_LEN(field2),
+			       GET_TD_SIZE(field2),
+			       GET_INTR_TARGET(field2),
+			       field3 & TRB_BEI ? 'B' : 'b',
+			       field3 & TRB_IDT ? 'T' : 't',
+			       field3 & TRB_IOC ? 'I' : 'i',
+			       field3 & TRB_CHAIN ? 'C' : 'c',
+			       field3 & TRB_NO_SNOOP ? 'S' : 's',
+			       field3 & TRB_ISP ? 'I' : 'i',
+			       field3 & TRB_ENT ? 'E' : 'e',
+			       field3 & TRB_CYCLE ? 'C' : 'c',
+			       !(field3 & TRB_EVENT_INVALIDATE) ? 'V' : 'v');
+		break;
+	case TRB_CMD_NOOP:
+	case TRB_ENABLE_SLOT:
+		ret = snprintf(str, size, "%s: flags %c",
+			       cdnsp_trb_type_string(type),
+			       field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_DISABLE_SLOT:
+		ret = snprintf(str, size, "%s: slot %ld flags %c",
+			       cdnsp_trb_type_string(type),
+			       TRB_TO_SLOT_ID(field3),
+			       field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_ADDR_DEV:
+		ret = snprintf(str, size,
+			       "%s: ctx %08x%08x slot %ld flags %c:%c",
+			       cdnsp_trb_type_string(type), field1, field0,
+			       TRB_TO_SLOT_ID(field3),
+			       field3 & TRB_BSR ? 'B' : 'b',
+			       field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_CONFIG_EP:
+		ret = snprintf(str, size,
+			       "%s: ctx %08x%08x slot %ld flags %c:%c",
+			       cdnsp_trb_type_string(type), field1, field0,
+			       TRB_TO_SLOT_ID(field3),
+			       field3 & TRB_DC ? 'D' : 'd',
+			       field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_EVAL_CONTEXT:
+		ret = snprintf(str, size,
+			       "%s: ctx %08x%08x slot %ld flags %c",
+			       cdnsp_trb_type_string(type), field1, field0,
+			       TRB_TO_SLOT_ID(field3),
+			       field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_RESET_EP:
+	case TRB_HALT_ENDPOINT:
+	case TRB_FLUSH_ENDPOINT:
+		ret = snprintf(str, size,
+			       "%s: ep%d%s(%d) ctx %08x%08x slot %ld flags %c",
+			       cdnsp_trb_type_string(type),
+			       ep_num, ep_id % 2 ? "out" : "in",
+			       TRB_TO_EP_INDEX(field3), field1, field0,
+			       TRB_TO_SLOT_ID(field3),
+			       field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_STOP_RING:
+		ret = snprintf(str, size,
+			       "%s: ep%d%s(%d) slot %ld sp %d flags %c",
+			       cdnsp_trb_type_string(type),
+			       ep_num, ep_id % 2 ? "out" : "in",
+			       TRB_TO_EP_INDEX(field3),
+			       TRB_TO_SLOT_ID(field3),
+			       TRB_TO_SUSPEND_PORT(field3),
+			       field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_SET_DEQ:
+		ret = snprintf(str, size,
+			       "%s: ep%d%s(%d) deq %08x%08x stream %ld slot %ld  flags %c",
+			       cdnsp_trb_type_string(type),
+			       ep_num, ep_id % 2 ? "out" : "in",
+			       TRB_TO_EP_INDEX(field3), field1, field0,
+			       TRB_TO_STREAM_ID(field2),
+			       TRB_TO_SLOT_ID(field3),
+			       field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_RESET_DEV:
+		ret = snprintf(str, size, "%s: slot %ld flags %c",
+			       cdnsp_trb_type_string(type),
+			       TRB_TO_SLOT_ID(field3),
+			       field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_ENDPOINT_NRDY:
+		temp = TRB_TO_HOST_STREAM(field2);
+
+		ret = snprintf(str, size,
+			       "%s: ep%d%s(%d) H_SID %x%s%s D_SID %lx flags %c:%c",
+			       cdnsp_trb_type_string(type),
+			       ep_num, ep_id % 2 ? "out" : "in",
+			       TRB_TO_EP_INDEX(field3), temp,
+			       temp == STREAM_PRIME_ACK ? "(PRIME)" : "",
+			       temp == STREAM_REJECTED ? "(REJECTED)" : "",
+			       TRB_TO_DEV_STREAM(field0),
+			       field3 & TRB_STAT ? 'S' : 's',
+			       field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	default:
+		ret = snprintf(str, size,
+			       "type '%s' -> raw %08x %08x %08x %08x",
+			       cdnsp_trb_type_string(type),
+			       field0, field1, field2, field3);
+	}
+
+	if (ret >= size)
+		pr_info("CDNSP: buffer overflowed.\n");
+
+	return str;
+}
+
+static inline const char *cdnsp_decode_slot_context(u32 info, u32 info2,
+						    u32 int_target, u32 state)
+{
+	static char str[1024];
+	int ret = 0;
+	u32 speed;
+	char *s;
+
+	speed = info & DEV_SPEED;
+
+	switch (speed) {
+	case SLOT_SPEED_FS:
+		s = "full-speed";
+		break;
+	case SLOT_SPEED_HS:
+		s = "high-speed";
+		break;
+	case SLOT_SPEED_SS:
+		s = "super-speed";
+		break;
+	case SLOT_SPEED_SSP:
+		s = "super-speed plus";
+		break;
+	default:
+		s = "UNKNOWN speed";
+	}
+
+	ret = sprintf(str, "%s Ctx Entries %d",
+		      s, (info & LAST_CTX_MASK) >> 27);
+
+	ret += sprintf(str + ret, " [Intr %ld] Addr %ld State %s",
+		       GET_INTR_TARGET(int_target), state & DEV_ADDR_MASK,
+		       cdnsp_slot_state_string(GET_SLOT_STATE(state)));
+
+	return str;
+}
+
+static inline const char *cdnsp_portsc_link_state_string(u32 portsc)
+{
+	switch (portsc & PORT_PLS_MASK) {
+	case XDEV_U0:
+		return "U0";
+	case XDEV_U1:
+		return "U1";
+	case XDEV_U2:
+		return "U2";
+	case XDEV_U3:
+		return "U3";
+	case XDEV_DISABLED:
+		return "Disabled";
+	case XDEV_RXDETECT:
+		return "RxDetect";
+	case XDEV_INACTIVE:
+		return "Inactive";
+	case XDEV_POLLING:
+		return "Polling";
+	case XDEV_RECOVERY:
+		return "Recovery";
+	case XDEV_HOT_RESET:
+		return "Hot Reset";
+	case XDEV_COMP_MODE:
+		return "Compliance mode";
+	case XDEV_TEST_MODE:
+		return "Test mode";
+	case XDEV_RESUME:
+		return "Resume";
+	default:
+		break;
+	}
+
+	return "Unknown";
+}
+
+static inline const char *cdnsp_decode_portsc(char *str, size_t size,
+					      u32 portsc)
+{
+	int ret;
+
+	ret = snprintf(str, size, "%s %s %s Link:%s PortSpeed:%d ",
+		       portsc & PORT_POWER ? "Powered" : "Powered-off",
+		       portsc & PORT_CONNECT ? "Connected" : "Not-connected",
+		       portsc & PORT_PED ? "Enabled" : "Disabled",
+		       cdnsp_portsc_link_state_string(portsc),
+		       DEV_PORT_SPEED(portsc));
+
+	if (portsc & PORT_RESET)
+		ret += snprintf(str + ret, size - ret, "In-Reset ");
+
+	ret += snprintf(str + ret, size - ret, "Change: ");
+	if (portsc & PORT_CSC)
+		ret += snprintf(str + ret, size - ret, "CSC ");
+	if (portsc & PORT_WRC)
+		ret += snprintf(str + ret, size - ret, "WRC ");
+	if (portsc & PORT_RC)
+		ret += snprintf(str + ret, size - ret, "PRC ");
+	if (portsc & PORT_PLC)
+		ret += snprintf(str + ret, size - ret, "PLC ");
+	if (portsc & PORT_CEC)
+		ret += snprintf(str + ret, size - ret, "CEC ");
+	ret += snprintf(str + ret, size - ret, "Wake: ");
+	if (portsc & PORT_WKCONN_E)
+		ret += snprintf(str + ret, size - ret, "WCE ");
+	if (portsc & PORT_WKDISC_E)
+		ret += snprintf(str + ret, size - ret, "WDE ");
+
+	return str;
+}
+
+static inline const char *cdnsp_ep_state_string(u8 state)
+{
+	switch (state) {
+	case EP_STATE_DISABLED:
+		return "disabled";
+	case EP_STATE_RUNNING:
+		return "running";
+	case EP_STATE_HALTED:
+		return "halted";
+	case EP_STATE_STOPPED:
+		return "stopped";
+	case EP_STATE_ERROR:
+		return "error";
+	default:
+		return "INVALID";
+	}
+}
+
+static inline const char *cdnsp_ep_type_string(u8 type)
+{
+	switch (type) {
+	case ISOC_OUT_EP:
+		return "Isoc OUT";
+	case BULK_OUT_EP:
+		return "Bulk OUT";
+	case INT_OUT_EP:
+		return "Int OUT";
+	case CTRL_EP:
+		return "Ctrl";
+	case ISOC_IN_EP:
+		return "Isoc IN";
+	case BULK_IN_EP:
+		return "Bulk IN";
+	case INT_IN_EP:
+		return "Int IN";
+	default:
+		return "INVALID";
+	}
+}
+
+static inline const char *cdnsp_decode_ep_context(char *str, size_t size,
+						  u32 info, u32 info2,
+						  u64 deq, u32 tx_info)
+{
+	u8 max_pstr, ep_state, interval, ep_type, burst, cerr, mult;
+	bool lsa, hid;
+	u16 maxp, avg;
+	u32 esit;
+	int ret;
+
+	esit = CTX_TO_MAX_ESIT_PAYLOAD_HI(info) << 16 |
+	       CTX_TO_MAX_ESIT_PAYLOAD_LO(tx_info);
+
+	ep_state = info & EP_STATE_MASK;
+	max_pstr = CTX_TO_EP_MAXPSTREAMS(info);
+	interval = CTX_TO_EP_INTERVAL(info);
+	mult = CTX_TO_EP_MULT(info) + 1;
+	lsa = !!(info & EP_HAS_LSA);
+
+	cerr = (info2 & (3 << 1)) >> 1;
+	ep_type = CTX_TO_EP_TYPE(info2);
+	hid = !!(info2 & (1 << 7));
+	burst = CTX_TO_MAX_BURST(info2);
+	maxp = MAX_PACKET_DECODED(info2);
+
+	avg = EP_AVG_TRB_LENGTH(tx_info);
+
+	ret = snprintf(str, size, "State %s mult %d max P. Streams %d %s",
+		       cdnsp_ep_state_string(ep_state), mult,
+		       max_pstr, lsa ? "LSA " : "");
+
+	ret += snprintf(str + ret, size - ret,
+			"interval %d us max ESIT payload %d CErr %d ",
+			(1 << interval) * 125, esit, cerr);
+
+	ret += snprintf(str + ret, size - ret,
+			"Type %s %sburst %d maxp %d deq %016llx ",
+			cdnsp_ep_type_string(ep_type), hid ? "HID" : "",
+			burst, maxp, deq);
+
+	ret += snprintf(str + ret, size - ret, "avg trb len %d", avg);
+
+	return str;
+}
+
+#endif /*__LINUX_CDNSP_DEBUG*/
diff --git a/drivers/usb/cdns3/cdnsp-ep0.c b/drivers/usb/cdns3/cdnsp-ep0.c
new file mode 100644
index 000000000..f317d3c84
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-ep0.c
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence CDNSP DRD Driver.
+ *
+ * Copyright (C) 2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ */
+
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+#include <linux/list.h>
+
+#include "cdnsp-gadget.h"
+#include "cdnsp-trace.h"
+
+static void cdnsp_ep0_stall(struct cdnsp_device *pdev)
+{
+	struct cdnsp_request *preq;
+	struct cdnsp_ep *pep;
+
+	pep = &pdev->eps[0];
+	preq = next_request(&pep->pending_list);
+
+	if (pdev->three_stage_setup) {
+		cdnsp_halt_endpoint(pdev, pep, true);
+
+		if (preq)
+			cdnsp_gadget_giveback(pep, preq, -ECONNRESET);
+	} else {
+		pep->ep_state |= EP0_HALTED_STATUS;
+
+		if (preq)
+			list_del(&preq->list);
+
+		cdnsp_status_stage(pdev);
+	}
+}
+
+static int cdnsp_ep0_delegate_req(struct cdnsp_device *pdev,
+				  struct usb_ctrlrequest *ctrl)
+{
+	int ret;
+
+	spin_unlock(&pdev->lock);
+	ret = pdev->gadget_driver->setup(&pdev->gadget, ctrl);
+	spin_lock(&pdev->lock);
+
+	return ret;
+}
+
+static int cdnsp_ep0_set_config(struct cdnsp_device *pdev,
+				struct usb_ctrlrequest *ctrl)
+{
+	enum usb_device_state state = pdev->gadget.state;
+	u32 cfg;
+	int ret;
+
+	cfg = le16_to_cpu(ctrl->wValue);
+
+	switch (state) {
+	case USB_STATE_ADDRESS:
+		trace_cdnsp_ep0_set_config("from Address state");
+		break;
+	case USB_STATE_CONFIGURED:
+		trace_cdnsp_ep0_set_config("from Configured state");
+		break;
+	default:
+		dev_err(pdev->dev, "Set Configuration - bad device state\n");
+		return -EINVAL;
+	}
+
+	ret = cdnsp_ep0_delegate_req(pdev, ctrl);
+	if (ret)
+		return ret;
+
+	if (!cfg)
+		usb_gadget_set_state(&pdev->gadget, USB_STATE_ADDRESS);
+
+	return 0;
+}
+
+static int cdnsp_ep0_set_address(struct cdnsp_device *pdev,
+				 struct usb_ctrlrequest *ctrl)
+{
+	enum usb_device_state state = pdev->gadget.state;
+	struct cdnsp_slot_ctx *slot_ctx;
+	unsigned int slot_state;
+	int ret;
+	u32 addr;
+
+	addr = le16_to_cpu(ctrl->wValue);
+
+	if (addr > 127) {
+		dev_err(pdev->dev, "Invalid device address %d\n", addr);
+		return -EINVAL;
+	}
+
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->out_ctx);
+
+	if (state == USB_STATE_CONFIGURED) {
+		dev_err(pdev->dev, "Can't Set Address from Configured State\n");
+		return -EINVAL;
+	}
+
+	pdev->device_address = le16_to_cpu(ctrl->wValue);
+
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->out_ctx);
+	slot_state = GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state));
+	if (slot_state == SLOT_STATE_ADDRESSED)
+		cdnsp_reset_device(pdev);
+
+	/*set device address*/
+	ret = cdnsp_setup_device(pdev, SETUP_CONTEXT_ADDRESS);
+	if (ret)
+		return ret;
+
+	if (addr)
+		usb_gadget_set_state(&pdev->gadget, USB_STATE_ADDRESS);
+	else
+		usb_gadget_set_state(&pdev->gadget, USB_STATE_DEFAULT);
+
+	return 0;
+}
+
+int cdnsp_status_stage(struct cdnsp_device *pdev)
+{
+	pdev->ep0_stage = CDNSP_STATUS_STAGE;
+	pdev->ep0_preq.request.length = 0;
+
+	return cdnsp_ep_enqueue(pdev->ep0_preq.pep, &pdev->ep0_preq);
+}
+
+static int cdnsp_w_index_to_ep_index(u16 wIndex)
+{
+	if (!(wIndex & USB_ENDPOINT_NUMBER_MASK))
+		return 0;
+
+	return ((wIndex & USB_ENDPOINT_NUMBER_MASK) * 2) +
+		(wIndex & USB_ENDPOINT_DIR_MASK ? 1 : 0) - 1;
+}
+
+static int cdnsp_ep0_handle_status(struct cdnsp_device *pdev,
+				   struct usb_ctrlrequest *ctrl)
+{
+	struct cdnsp_ep *pep;
+	__le16 *response;
+	int ep_sts = 0;
+	u16 status = 0;
+	u32 recipient;
+
+	recipient = ctrl->bRequestType & USB_RECIP_MASK;
+
+	switch (recipient) {
+	case USB_RECIP_DEVICE:
+		status = pdev->gadget.is_selfpowered;
+		status |= pdev->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+
+		if (pdev->gadget.speed >= USB_SPEED_SUPER) {
+			status |= pdev->u1_allowed << USB_DEV_STAT_U1_ENABLED;
+			status |= pdev->u2_allowed << USB_DEV_STAT_U2_ENABLED;
+		}
+		break;
+	case USB_RECIP_INTERFACE:
+		/*
+		 * Function Remote Wake Capable	D0
+		 * Function Remote Wakeup	D1
+		 */
+		return cdnsp_ep0_delegate_req(pdev, ctrl);
+	case USB_RECIP_ENDPOINT:
+		ep_sts = cdnsp_w_index_to_ep_index(le16_to_cpu(ctrl->wIndex));
+		pep = &pdev->eps[ep_sts];
+		ep_sts = GET_EP_CTX_STATE(pep->out_ctx);
+
+		/* check if endpoint is stalled */
+		if (ep_sts == EP_STATE_HALTED)
+			status =  BIT(USB_ENDPOINT_HALT);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	response = (__le16 *)pdev->setup_buf;
+	*response = cpu_to_le16(status);
+
+	pdev->ep0_preq.request.length = sizeof(*response);
+	pdev->ep0_preq.request.buf = pdev->setup_buf;
+
+	return cdnsp_ep_enqueue(pdev->ep0_preq.pep, &pdev->ep0_preq);
+}
+
+static void cdnsp_enter_test_mode(struct cdnsp_device *pdev)
+{
+	u32 temp;
+
+	temp = readl(&pdev->active_port->regs->portpmsc) & ~GENMASK(31, 28);
+	temp |= PORT_TEST_MODE(pdev->test_mode);
+	writel(temp, &pdev->active_port->regs->portpmsc);
+}
+
+static int cdnsp_ep0_handle_feature_device(struct cdnsp_device *pdev,
+					   struct usb_ctrlrequest *ctrl,
+					   int set)
+{
+	enum usb_device_state state;
+	enum usb_device_speed speed;
+	u16 tmode;
+
+	state = pdev->gadget.state;
+	speed = pdev->gadget.speed;
+
+	switch (le16_to_cpu(ctrl->wValue)) {
+	case USB_DEVICE_REMOTE_WAKEUP:
+		pdev->may_wakeup = !!set;
+		trace_cdnsp_may_wakeup(set);
+		break;
+	case USB_DEVICE_U1_ENABLE:
+		if (state != USB_STATE_CONFIGURED || speed < USB_SPEED_SUPER)
+			return -EINVAL;
+
+		pdev->u1_allowed = !!set;
+		trace_cdnsp_u1(set);
+		break;
+	case USB_DEVICE_U2_ENABLE:
+		if (state != USB_STATE_CONFIGURED || speed < USB_SPEED_SUPER)
+			return -EINVAL;
+
+		pdev->u2_allowed = !!set;
+		trace_cdnsp_u2(set);
+		break;
+	case USB_DEVICE_LTM_ENABLE:
+		return -EINVAL;
+	case USB_DEVICE_TEST_MODE:
+		if (state != USB_STATE_CONFIGURED || speed > USB_SPEED_HIGH)
+			return -EINVAL;
+
+		tmode = le16_to_cpu(ctrl->wIndex);
+
+		if (!set || (tmode & 0xff) != 0)
+			return -EINVAL;
+
+		tmode = tmode >> 8;
+
+		if (tmode > USB_TEST_FORCE_ENABLE || tmode < USB_TEST_J)
+			return -EINVAL;
+
+		pdev->test_mode = tmode;
+
+		/*
+		 * Test mode must be set before Status Stage but controller
+		 * will start testing sequence after Status Stage.
+		 */
+		cdnsp_enter_test_mode(pdev);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cdnsp_ep0_handle_feature_intf(struct cdnsp_device *pdev,
+					 struct usb_ctrlrequest *ctrl,
+					 int set)
+{
+	u16 wValue, wIndex;
+	int ret;
+
+	wValue = le16_to_cpu(ctrl->wValue);
+	wIndex = le16_to_cpu(ctrl->wIndex);
+
+	switch (wValue) {
+	case USB_INTRF_FUNC_SUSPEND:
+		ret = cdnsp_ep0_delegate_req(pdev, ctrl);
+		if (ret)
+			return ret;
+
+		/*
+		 * Remote wakeup is enabled when any function within a device
+		 * is enabled for function remote wakeup.
+		 */
+		if (wIndex & USB_INTRF_FUNC_SUSPEND_RW)
+			pdev->may_wakeup++;
+		else
+			if (pdev->may_wakeup > 0)
+				pdev->may_wakeup--;
+
+		return 0;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cdnsp_ep0_handle_feature_endpoint(struct cdnsp_device *pdev,
+					     struct usb_ctrlrequest *ctrl,
+					     int set)
+{
+	struct cdnsp_ep *pep;
+	u16 wValue;
+
+	wValue = le16_to_cpu(ctrl->wValue);
+	pep = &pdev->eps[cdnsp_w_index_to_ep_index(le16_to_cpu(ctrl->wIndex))];
+
+	switch (wValue) {
+	case USB_ENDPOINT_HALT:
+		if (!set && (pep->ep_state & EP_WEDGE)) {
+			/* Resets Sequence Number */
+			cdnsp_halt_endpoint(pdev, pep, 0);
+			cdnsp_halt_endpoint(pdev, pep, 1);
+			break;
+		}
+
+		return cdnsp_halt_endpoint(pdev, pep, set);
+	default:
+		dev_warn(pdev->dev, "WARN Incorrect wValue %04x\n", wValue);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cdnsp_ep0_handle_feature(struct cdnsp_device *pdev,
+				    struct usb_ctrlrequest *ctrl,
+				    int set)
+{
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		return cdnsp_ep0_handle_feature_device(pdev, ctrl, set);
+	case USB_RECIP_INTERFACE:
+		return cdnsp_ep0_handle_feature_intf(pdev, ctrl, set);
+	case USB_RECIP_ENDPOINT:
+		return cdnsp_ep0_handle_feature_endpoint(pdev, ctrl, set);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int cdnsp_ep0_set_sel(struct cdnsp_device *pdev,
+			     struct usb_ctrlrequest *ctrl)
+{
+	enum usb_device_state state = pdev->gadget.state;
+	u16 wLength;
+
+	if (state == USB_STATE_DEFAULT)
+		return -EINVAL;
+
+	wLength = le16_to_cpu(ctrl->wLength);
+
+	if (wLength != 6) {
+		dev_err(pdev->dev, "Set SEL should be 6 bytes, got %d\n",
+			wLength);
+		return -EINVAL;
+	}
+
+	/*
+	 * To handle Set SEL we need to receive 6 bytes from Host. So let's
+	 * queue a usb_request for 6 bytes.
+	 */
+	pdev->ep0_preq.request.length = 6;
+	pdev->ep0_preq.request.buf = pdev->setup_buf;
+
+	return cdnsp_ep_enqueue(pdev->ep0_preq.pep, &pdev->ep0_preq);
+}
+
+static int cdnsp_ep0_set_isoch_delay(struct cdnsp_device *pdev,
+				     struct usb_ctrlrequest *ctrl)
+{
+	if (le16_to_cpu(ctrl->wIndex) || le16_to_cpu(ctrl->wLength))
+		return -EINVAL;
+
+	pdev->gadget.isoch_delay = le16_to_cpu(ctrl->wValue);
+
+	return 0;
+}
+
+static int cdnsp_ep0_std_request(struct cdnsp_device *pdev,
+				 struct usb_ctrlrequest *ctrl)
+{
+	int ret;
+
+	switch (ctrl->bRequest) {
+	case USB_REQ_GET_STATUS:
+		ret = cdnsp_ep0_handle_status(pdev, ctrl);
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+		ret = cdnsp_ep0_handle_feature(pdev, ctrl, 0);
+		break;
+	case USB_REQ_SET_FEATURE:
+		ret = cdnsp_ep0_handle_feature(pdev, ctrl, 1);
+		break;
+	case USB_REQ_SET_ADDRESS:
+		ret = cdnsp_ep0_set_address(pdev, ctrl);
+		break;
+	case USB_REQ_SET_CONFIGURATION:
+		ret = cdnsp_ep0_set_config(pdev, ctrl);
+		break;
+	case USB_REQ_SET_SEL:
+		ret = cdnsp_ep0_set_sel(pdev, ctrl);
+		break;
+	case USB_REQ_SET_ISOCH_DELAY:
+		ret = cdnsp_ep0_set_isoch_delay(pdev, ctrl);
+		break;
+	default:
+		ret = cdnsp_ep0_delegate_req(pdev, ctrl);
+		break;
+	}
+
+	return ret;
+}
+
+void cdnsp_setup_analyze(struct cdnsp_device *pdev)
+{
+	struct usb_ctrlrequest *ctrl = &pdev->setup;
+	int ret = -EINVAL;
+	u16 len;
+
+	trace_cdnsp_ctrl_req(ctrl);
+
+	if (!pdev->gadget_driver)
+		goto out;
+
+	if (pdev->gadget.state == USB_STATE_NOTATTACHED) {
+		dev_err(pdev->dev, "ERR: Setup detected in unattached state\n");
+		goto out;
+	}
+
+	/* Restore the ep0 to Stopped/Running state. */
+	if (pdev->eps[0].ep_state & EP_HALTED) {
+		trace_cdnsp_ep0_halted("Restore to normal state");
+		cdnsp_halt_endpoint(pdev, &pdev->eps[0], 0);
+	}
+
+	/*
+	 * Finishing previous SETUP transfer by removing request from
+	 * list and informing upper layer
+	 */
+	if (!list_empty(&pdev->eps[0].pending_list)) {
+		struct cdnsp_request	*req;
+
+		trace_cdnsp_ep0_request("Remove previous");
+		req = next_request(&pdev->eps[0].pending_list);
+		cdnsp_ep_dequeue(&pdev->eps[0], req);
+	}
+
+	len = le16_to_cpu(ctrl->wLength);
+	if (!len) {
+		pdev->three_stage_setup = false;
+		pdev->ep0_expect_in = false;
+	} else {
+		pdev->three_stage_setup = true;
+		pdev->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN);
+	}
+
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+		ret = cdnsp_ep0_std_request(pdev, ctrl);
+	else
+		ret = cdnsp_ep0_delegate_req(pdev, ctrl);
+
+	if (ret == USB_GADGET_DELAYED_STATUS) {
+		trace_cdnsp_ep0_status_stage("delayed");
+		return;
+	}
+out:
+	if (ret < 0)
+		cdnsp_ep0_stall(pdev);
+	else if (!len && pdev->ep0_stage != CDNSP_STATUS_STAGE)
+		cdnsp_status_stage(pdev);
+}
diff --git a/drivers/usb/cdns3/cdnsp-gadget.c b/drivers/usb/cdns3/cdnsp-gadget.c
new file mode 100644
index 000000000..0044897ee
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-gadget.c
@@ -0,0 +1,2029 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence CDNSP DRD Driver.
+ *
+ * Copyright (C) 2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ */
+
+#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/iopoll.h>
+#include <linux/delay.h>
+#include <linux/log2.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/dmi.h>
+
+#include "core.h"
+#include "gadget-export.h"
+#include "drd.h"
+#include "cdnsp-gadget.h"
+#include "cdnsp-trace.h"
+
+unsigned int cdnsp_port_speed(unsigned int port_status)
+{
+	/*Detect gadget speed based on PORTSC register*/
+	if (DEV_SUPERSPEEDPLUS(port_status))
+		return USB_SPEED_SUPER_PLUS;
+	else if (DEV_SUPERSPEED(port_status))
+		return USB_SPEED_SUPER;
+	else if (DEV_HIGHSPEED(port_status))
+		return USB_SPEED_HIGH;
+	else if (DEV_FULLSPEED(port_status))
+		return USB_SPEED_FULL;
+
+	/* If device is detached then speed will be USB_SPEED_UNKNOWN.*/
+	return USB_SPEED_UNKNOWN;
+}
+
+/*
+ * Given a port state, this function returns a value that would result in the
+ * port being in the same state, if the value was written to the port status
+ * control register.
+ * Save Read Only (RO) bits and save read/write bits where
+ * writing a 0 clears the bit and writing a 1 sets the bit (RWS).
+ * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
+ */
+u32 cdnsp_port_state_to_neutral(u32 state)
+{
+	/* Save read-only status and port state. */
+	return (state & CDNSP_PORT_RO) | (state & CDNSP_PORT_RWS);
+}
+
+/**
+ * cdnsp_find_next_ext_cap - Find the offset of the extended capabilities
+ *                           with capability ID id.
+ * @base: PCI MMIO registers base address.
+ * @start: Address at which to start looking, (0 or HCC_PARAMS to start at
+ *         beginning of list)
+ * @id: Extended capability ID to search for.
+ *
+ * Returns the offset of the next matching extended capability structure.
+ * Some capabilities can occur several times,
+ * e.g., the EXT_CAPS_PROTOCOL, and this provides a way to find them all.
+ */
+int cdnsp_find_next_ext_cap(void __iomem *base, u32 start, int id)
+{
+	u32 offset = start;
+	u32 next;
+	u32 val;
+
+	if (!start || start == HCC_PARAMS_OFFSET) {
+		val = readl(base + HCC_PARAMS_OFFSET);
+		if (val == ~0)
+			return 0;
+
+		offset = HCC_EXT_CAPS(val) << 2;
+		if (!offset)
+			return 0;
+	}
+
+	do {
+		val = readl(base + offset);
+		if (val == ~0)
+			return 0;
+
+		if (EXT_CAPS_ID(val) == id && offset != start)
+			return offset;
+
+		next = EXT_CAPS_NEXT(val);
+		offset += next << 2;
+	} while (next);
+
+	return 0;
+}
+
+void cdnsp_set_link_state(struct cdnsp_device *pdev,
+			  __le32 __iomem *port_regs,
+			  u32 link_state)
+{
+	int port_num = 0xFF;
+	u32 temp;
+
+	temp = readl(port_regs);
+	temp = cdnsp_port_state_to_neutral(temp);
+	temp |= PORT_WKCONN_E | PORT_WKDISC_E;
+	writel(temp, port_regs);
+
+	temp &= ~PORT_PLS_MASK;
+	temp |= PORT_LINK_STROBE | link_state;
+
+	if (pdev->active_port)
+		port_num = pdev->active_port->port_num;
+
+	trace_cdnsp_handle_port_status(port_num, readl(port_regs));
+	writel(temp, port_regs);
+	trace_cdnsp_link_state_changed(port_num, readl(port_regs));
+}
+
+static void cdnsp_disable_port(struct cdnsp_device *pdev,
+			       __le32 __iomem *port_regs)
+{
+	u32 temp = cdnsp_port_state_to_neutral(readl(port_regs));
+
+	writel(temp | PORT_PED, port_regs);
+}
+
+static void cdnsp_clear_port_change_bit(struct cdnsp_device *pdev,
+					__le32 __iomem *port_regs)
+{
+	u32 portsc = readl(port_regs);
+
+	writel(cdnsp_port_state_to_neutral(portsc) |
+	       (portsc & PORT_CHANGE_BITS), port_regs);
+}
+
+static void cdnsp_set_chicken_bits_2(struct cdnsp_device *pdev, u32 bit)
+{
+	__le32 __iomem *reg;
+	void __iomem *base;
+	u32 offset = 0;
+
+	base = &pdev->cap_regs->hc_capbase;
+	offset = cdnsp_find_next_ext_cap(base, offset, D_XEC_PRE_REGS_CAP);
+	reg = base + offset + REG_CHICKEN_BITS_2_OFFSET;
+
+	bit = readl(reg) | bit;
+	writel(bit, reg);
+}
+
+static void cdnsp_clear_chicken_bits_2(struct cdnsp_device *pdev, u32 bit)
+{
+	__le32 __iomem *reg;
+	void __iomem *base;
+	u32 offset = 0;
+
+	base = &pdev->cap_regs->hc_capbase;
+	offset = cdnsp_find_next_ext_cap(base, offset, D_XEC_PRE_REGS_CAP);
+	reg = base + offset + REG_CHICKEN_BITS_2_OFFSET;
+
+	bit = readl(reg) & ~bit;
+	writel(bit, reg);
+}
+
+/*
+ * Disable interrupts and begin the controller halting process.
+ */
+static void cdnsp_quiesce(struct cdnsp_device *pdev)
+{
+	u32 halted;
+	u32 mask;
+	u32 cmd;
+
+	mask = ~(u32)(CDNSP_IRQS);
+
+	halted = readl(&pdev->op_regs->status) & STS_HALT;
+	if (!halted)
+		mask &= ~(CMD_R_S | CMD_DEVEN);
+
+	cmd = readl(&pdev->op_regs->command);
+	cmd &= mask;
+	writel(cmd, &pdev->op_regs->command);
+}
+
+/*
+ * Force controller into halt state.
+ *
+ * Disable any IRQs and clear the run/stop bit.
+ * Controller will complete any current and actively pipelined transactions, and
+ * should halt within 16 ms of the run/stop bit being cleared.
+ * Read controller Halted bit in the status register to see when the
+ * controller is finished.
+ */
+int cdnsp_halt(struct cdnsp_device *pdev)
+{
+	int ret;
+	u32 val;
+
+	cdnsp_quiesce(pdev);
+
+	ret = readl_poll_timeout_atomic(&pdev->op_regs->status, val,
+					val & STS_HALT, 1,
+					CDNSP_MAX_HALT_USEC);
+	if (ret) {
+		dev_err(pdev->dev, "ERROR: Device halt failed\n");
+		return ret;
+	}
+
+	pdev->cdnsp_state |= CDNSP_STATE_HALTED;
+
+	return 0;
+}
+
+/*
+ * device controller died, register read returns 0xffffffff, or command never
+ * ends.
+ */
+void cdnsp_died(struct cdnsp_device *pdev)
+{
+	dev_err(pdev->dev, "ERROR: CDNSP controller not responding\n");
+	pdev->cdnsp_state |= CDNSP_STATE_DYING;
+	cdnsp_halt(pdev);
+}
+
+/*
+ * Set the run bit and wait for the device to be running.
+ */
+static int cdnsp_start(struct cdnsp_device *pdev)
+{
+	u32 temp;
+	int ret;
+
+	temp = readl(&pdev->op_regs->command);
+	temp |= (CMD_R_S | CMD_DEVEN);
+	writel(temp, &pdev->op_regs->command);
+
+	pdev->cdnsp_state = 0;
+
+	/*
+	 * Wait for the STS_HALT Status bit to be 0 to indicate the device is
+	 * running.
+	 */
+	ret = readl_poll_timeout_atomic(&pdev->op_regs->status, temp,
+					!(temp & STS_HALT), 1,
+					CDNSP_MAX_HALT_USEC);
+	if (ret) {
+		pdev->cdnsp_state = CDNSP_STATE_DYING;
+		dev_err(pdev->dev, "ERROR: Controller run failed\n");
+	}
+
+	return ret;
+}
+
+/*
+ * Reset a halted controller.
+ *
+ * This resets pipelines, timers, counters, state machines, etc.
+ * Transactions will be terminated immediately, and operational registers
+ * will be set to their defaults.
+ */
+int cdnsp_reset(struct cdnsp_device *pdev)
+{
+	u32 command;
+	u32 temp;
+	int ret;
+
+	temp = readl(&pdev->op_regs->status);
+
+	if (temp == ~(u32)0) {
+		dev_err(pdev->dev, "Device not accessible, reset failed.\n");
+		return -ENODEV;
+	}
+
+	if ((temp & STS_HALT) == 0) {
+		dev_err(pdev->dev, "Controller not halted, aborting reset.\n");
+		return -EINVAL;
+	}
+
+	command = readl(&pdev->op_regs->command);
+	command |= CMD_RESET;
+	writel(command, &pdev->op_regs->command);
+
+	ret = readl_poll_timeout_atomic(&pdev->op_regs->command, temp,
+					!(temp & CMD_RESET), 1,
+					10 * 1000);
+	if (ret) {
+		dev_err(pdev->dev, "ERROR: Controller reset failed\n");
+		return ret;
+	}
+
+	/*
+	 * CDNSP cannot write any doorbells or operational registers other
+	 * than status until the "Controller Not Ready" flag is cleared.
+	 */
+	ret = readl_poll_timeout_atomic(&pdev->op_regs->status, temp,
+					!(temp & STS_CNR), 1,
+					10 * 1000);
+
+	if (ret) {
+		dev_err(pdev->dev, "ERROR: Controller not ready to work\n");
+		return ret;
+	}
+
+	dev_dbg(pdev->dev, "Controller ready to work");
+
+	return ret;
+}
+
+/*
+ * cdnsp_get_endpoint_index - Find the index for an endpoint given its
+ * descriptor.Use the return value to right shift 1 for the bitmask.
+ *
+ * Index = (epnum * 2) + direction - 1,
+ * where direction = 0 for OUT, 1 for IN.
+ * For control endpoints, the IN index is used (OUT index is unused), so
+ * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2)
+ */
+static unsigned int
+	cdnsp_get_endpoint_index(const struct usb_endpoint_descriptor *desc)
+{
+	unsigned int index = (unsigned int)usb_endpoint_num(desc);
+
+	if (usb_endpoint_xfer_control(desc))
+		return index * 2;
+
+	return (index * 2) + (usb_endpoint_dir_in(desc) ? 1 : 0) - 1;
+}
+
+/*
+ * Find the flag for this endpoint (for use in the control context). Use the
+ * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is
+ * bit 1, etc.
+ */
+static unsigned int
+	cdnsp_get_endpoint_flag(const struct usb_endpoint_descriptor *desc)
+{
+	return 1 << (cdnsp_get_endpoint_index(desc) + 1);
+}
+
+int cdnsp_ep_enqueue(struct cdnsp_ep *pep, struct cdnsp_request *preq)
+{
+	struct cdnsp_device *pdev = pep->pdev;
+	struct usb_request *request;
+	int ret;
+
+	if (preq->epnum == 0 && !list_empty(&pep->pending_list)) {
+		trace_cdnsp_request_enqueue_busy(preq);
+		return -EBUSY;
+	}
+
+	request = &preq->request;
+	request->actual = 0;
+	request->status = -EINPROGRESS;
+	preq->direction = pep->direction;
+	preq->epnum = pep->number;
+	preq->td.drbl = 0;
+
+	ret = usb_gadget_map_request_by_dev(pdev->dev, request, pep->direction);
+	if (ret) {
+		trace_cdnsp_request_enqueue_error(preq);
+		return ret;
+	}
+
+	list_add_tail(&preq->list, &pep->pending_list);
+
+	trace_cdnsp_request_enqueue(preq);
+
+	switch (usb_endpoint_type(pep->endpoint.desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		ret = cdnsp_queue_ctrl_tx(pdev, preq);
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_INT:
+		ret = cdnsp_queue_bulk_tx(pdev, preq);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		ret = cdnsp_queue_isoc_tx_prepare(pdev, preq);
+	}
+
+	if (ret)
+		goto unmap;
+
+	return 0;
+
+unmap:
+	usb_gadget_unmap_request_by_dev(pdev->dev, &preq->request,
+					pep->direction);
+	list_del(&preq->list);
+	trace_cdnsp_request_enqueue_error(preq);
+
+	return ret;
+}
+
+/*
+ * Remove the request's TD from the endpoint ring. This may cause the
+ * controller to stop USB transfers, potentially stopping in the middle of a
+ * TRB buffer. The controller should pick up where it left off in the TD,
+ * unless a Set Transfer Ring Dequeue Pointer is issued.
+ *
+ * The TRBs that make up the buffers for the canceled request will be "removed"
+ * from the ring. Since the ring is a contiguous structure, they can't be
+ * physically removed. Instead, there are two options:
+ *
+ *  1) If the controller is in the middle of processing the request to be
+ *     canceled, we simply move the ring's dequeue pointer past those TRBs
+ *     using the Set Transfer Ring Dequeue Pointer command. This will be
+ *     the common case, when drivers timeout on the last submitted request
+ *     and attempt to cancel.
+ *
+ *  2) If the controller is in the middle of a different TD, we turn the TRBs
+ *     into a series of 1-TRB transfer no-op TDs. No-ops shouldn't be chained.
+ *     The controller will need to invalidate the any TRBs it has cached after
+ *     the stop endpoint command.
+ *
+ *  3) The TD may have completed by the time the Stop Endpoint Command
+ *     completes, so software needs to handle that case too.
+ *
+ */
+int cdnsp_ep_dequeue(struct cdnsp_ep *pep, struct cdnsp_request *preq)
+{
+	struct cdnsp_device *pdev = pep->pdev;
+	int ret_stop = 0;
+	int ret_rem;
+
+	trace_cdnsp_request_dequeue(preq);
+
+	if (GET_EP_CTX_STATE(pep->out_ctx) == EP_STATE_RUNNING)
+		ret_stop = cdnsp_cmd_stop_ep(pdev, pep);
+
+	ret_rem = cdnsp_remove_request(pdev, preq, pep);
+
+	return ret_rem ? ret_rem : ret_stop;
+}
+
+static void cdnsp_zero_in_ctx(struct cdnsp_device *pdev)
+{
+	struct cdnsp_input_control_ctx *ctrl_ctx;
+	struct cdnsp_slot_ctx *slot_ctx;
+	struct cdnsp_ep_ctx *ep_ctx;
+	int i;
+
+	ctrl_ctx = cdnsp_get_input_control_ctx(&pdev->in_ctx);
+
+	/*
+	 * When a device's add flag and drop flag are zero, any subsequent
+	 * configure endpoint command will leave that endpoint's state
+	 * untouched. Make sure we don't leave any old state in the input
+	 * endpoint contexts.
+	 */
+	ctrl_ctx->drop_flags = 0;
+	ctrl_ctx->add_flags = 0;
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->in_ctx);
+	slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
+
+	/* Endpoint 0 is always valid */
+	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1));
+	for (i = 1; i < CDNSP_ENDPOINTS_NUM; ++i) {
+		ep_ctx = cdnsp_get_ep_ctx(&pdev->in_ctx, i);
+		ep_ctx->ep_info = 0;
+		ep_ctx->ep_info2 = 0;
+		ep_ctx->deq = 0;
+		ep_ctx->tx_info = 0;
+	}
+}
+
+/* Issue a configure endpoint command and wait for it to finish. */
+static int cdnsp_configure_endpoint(struct cdnsp_device *pdev)
+{
+	int ret;
+
+	cdnsp_queue_configure_endpoint(pdev, pdev->cmd.in_ctx->dma);
+	cdnsp_ring_cmd_db(pdev);
+	ret = cdnsp_wait_for_cmd_compl(pdev);
+	if (ret) {
+		dev_err(pdev->dev,
+			"ERR: unexpected command completion code 0x%x.\n", ret);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static void cdnsp_invalidate_ep_events(struct cdnsp_device *pdev,
+				       struct cdnsp_ep *pep)
+{
+	struct cdnsp_segment *segment;
+	union cdnsp_trb *event;
+	u32 cycle_state;
+	u32  data;
+
+	event = pdev->event_ring->dequeue;
+	segment = pdev->event_ring->deq_seg;
+	cycle_state = pdev->event_ring->cycle_state;
+
+	while (1) {
+		data = le32_to_cpu(event->trans_event.flags);
+
+		/* Check the owner of the TRB. */
+		if ((data & TRB_CYCLE) != cycle_state)
+			break;
+
+		if (TRB_FIELD_TO_TYPE(data) == TRB_TRANSFER &&
+		    TRB_TO_EP_ID(data) == (pep->idx + 1)) {
+			data |= TRB_EVENT_INVALIDATE;
+			event->trans_event.flags = cpu_to_le32(data);
+		}
+
+		if (cdnsp_last_trb_on_seg(segment, event)) {
+			cycle_state ^= 1;
+			segment = pdev->event_ring->deq_seg->next;
+			event = segment->trbs;
+		} else {
+			event++;
+		}
+	}
+}
+
+int cdnsp_wait_for_cmd_compl(struct cdnsp_device *pdev)
+{
+	struct cdnsp_segment *event_deq_seg;
+	union cdnsp_trb *cmd_trb;
+	dma_addr_t cmd_deq_dma;
+	union cdnsp_trb *event;
+	u32 cycle_state;
+	int ret, val;
+	u64 cmd_dma;
+	u32  flags;
+
+	cmd_trb = pdev->cmd.command_trb;
+	pdev->cmd.status = 0;
+
+	trace_cdnsp_cmd_wait_for_compl(pdev->cmd_ring, &cmd_trb->generic);
+
+	ret = readl_poll_timeout_atomic(&pdev->op_regs->cmd_ring, val,
+					!CMD_RING_BUSY(val), 1,
+					CDNSP_CMD_TIMEOUT);
+	if (ret) {
+		dev_err(pdev->dev, "ERR: Timeout while waiting for command\n");
+		trace_cdnsp_cmd_timeout(pdev->cmd_ring, &cmd_trb->generic);
+		pdev->cdnsp_state = CDNSP_STATE_DYING;
+		return -ETIMEDOUT;
+	}
+
+	event = pdev->event_ring->dequeue;
+	event_deq_seg = pdev->event_ring->deq_seg;
+	cycle_state = pdev->event_ring->cycle_state;
+
+	cmd_deq_dma = cdnsp_trb_virt_to_dma(pdev->cmd_ring->deq_seg, cmd_trb);
+	if (!cmd_deq_dma)
+		return -EINVAL;
+
+	while (1) {
+		flags = le32_to_cpu(event->event_cmd.flags);
+
+		/* Check the owner of the TRB. */
+		if ((flags & TRB_CYCLE) != cycle_state)
+			return -EINVAL;
+
+		cmd_dma = le64_to_cpu(event->event_cmd.cmd_trb);
+
+		/*
+		 * Check whether the completion event is for last queued
+		 * command.
+		 */
+		if (TRB_FIELD_TO_TYPE(flags) != TRB_COMPLETION ||
+		    cmd_dma != (u64)cmd_deq_dma) {
+			if (!cdnsp_last_trb_on_seg(event_deq_seg, event)) {
+				event++;
+				continue;
+			}
+
+			if (cdnsp_last_trb_on_ring(pdev->event_ring,
+						   event_deq_seg, event))
+				cycle_state ^= 1;
+
+			event_deq_seg = event_deq_seg->next;
+			event = event_deq_seg->trbs;
+			continue;
+		}
+
+		trace_cdnsp_handle_command(pdev->cmd_ring, &cmd_trb->generic);
+
+		pdev->cmd.status = GET_COMP_CODE(le32_to_cpu(event->event_cmd.status));
+		if (pdev->cmd.status == COMP_SUCCESS)
+			return 0;
+
+		return -pdev->cmd.status;
+	}
+}
+
+int cdnsp_halt_endpoint(struct cdnsp_device *pdev,
+			struct cdnsp_ep *pep,
+			int value)
+{
+	int ret;
+
+	trace_cdnsp_ep_halt(value ? "Set" : "Clear");
+
+	ret = cdnsp_cmd_stop_ep(pdev, pep);
+	if (ret)
+		return ret;
+
+	if (value) {
+		if (GET_EP_CTX_STATE(pep->out_ctx) == EP_STATE_STOPPED) {
+			cdnsp_queue_halt_endpoint(pdev, pep->idx);
+			cdnsp_ring_cmd_db(pdev);
+			ret = cdnsp_wait_for_cmd_compl(pdev);
+		}
+
+		pep->ep_state |= EP_HALTED;
+	} else {
+		cdnsp_queue_reset_ep(pdev, pep->idx);
+		cdnsp_ring_cmd_db(pdev);
+		ret = cdnsp_wait_for_cmd_compl(pdev);
+		trace_cdnsp_handle_cmd_reset_ep(pep->out_ctx);
+
+		if (ret)
+			return ret;
+
+		pep->ep_state &= ~EP_HALTED;
+
+		if (pep->idx != 0 && !(pep->ep_state & EP_WEDGE))
+			cdnsp_ring_doorbell_for_active_rings(pdev, pep);
+
+		pep->ep_state &= ~EP_WEDGE;
+	}
+
+	return 0;
+}
+
+static int cdnsp_update_eps_configuration(struct cdnsp_device *pdev,
+					  struct cdnsp_ep *pep)
+{
+	struct cdnsp_input_control_ctx *ctrl_ctx;
+	struct cdnsp_slot_ctx *slot_ctx;
+	int ret = 0;
+	u32 ep_sts;
+	int i;
+
+	ctrl_ctx = cdnsp_get_input_control_ctx(&pdev->in_ctx);
+
+	/* Don't issue the command if there's no endpoints to update. */
+	if (ctrl_ctx->add_flags == 0 && ctrl_ctx->drop_flags == 0)
+		return 0;
+
+	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+	ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG);
+	ctrl_ctx->drop_flags &= cpu_to_le32(~(SLOT_FLAG | EP0_FLAG));
+
+	/* Fix up Context Entries field. Minimum value is EP0 == BIT(1). */
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->in_ctx);
+	for (i = CDNSP_ENDPOINTS_NUM; i >= 1; i--) {
+		__le32 le32 = cpu_to_le32(BIT(i));
+
+		if ((pdev->eps[i - 1].ring && !(ctrl_ctx->drop_flags & le32)) ||
+		    (ctrl_ctx->add_flags & le32) || i == 1) {
+			slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
+			slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(i));
+			break;
+		}
+	}
+
+	ep_sts = GET_EP_CTX_STATE(pep->out_ctx);
+
+	if ((ctrl_ctx->add_flags != cpu_to_le32(SLOT_FLAG) &&
+	     ep_sts == EP_STATE_DISABLED) ||
+	    (ep_sts != EP_STATE_DISABLED && ctrl_ctx->drop_flags))
+		ret = cdnsp_configure_endpoint(pdev);
+
+	trace_cdnsp_configure_endpoint(cdnsp_get_slot_ctx(&pdev->out_ctx));
+	trace_cdnsp_handle_cmd_config_ep(pep->out_ctx);
+
+	cdnsp_zero_in_ctx(pdev);
+
+	return ret;
+}
+
+/*
+ * This submits a Reset Device Command, which will set the device state to 0,
+ * set the device address to 0, and disable all the endpoints except the default
+ * control endpoint. The USB core should come back and call
+ * cdnsp_setup_device(), and then re-set up the configuration.
+ */
+int cdnsp_reset_device(struct cdnsp_device *pdev)
+{
+	struct cdnsp_slot_ctx *slot_ctx;
+	int slot_state;
+	int ret, i;
+
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->in_ctx);
+	slot_ctx->dev_info = 0;
+	pdev->device_address = 0;
+
+	/* If device is not setup, there is no point in resetting it. */
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->out_ctx);
+	slot_state = GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state));
+	trace_cdnsp_reset_device(slot_ctx);
+
+	if (slot_state <= SLOT_STATE_DEFAULT &&
+	    pdev->eps[0].ep_state & EP_HALTED) {
+		cdnsp_halt_endpoint(pdev, &pdev->eps[0], 0);
+	}
+
+	/*
+	 * During Reset Device command controller shall transition the
+	 * endpoint ep0 to the Running State.
+	 */
+	pdev->eps[0].ep_state &= ~(EP_STOPPED | EP_HALTED);
+	pdev->eps[0].ep_state |= EP_ENABLED;
+
+	if (slot_state <= SLOT_STATE_DEFAULT)
+		return 0;
+
+	cdnsp_queue_reset_device(pdev);
+	cdnsp_ring_cmd_db(pdev);
+	ret = cdnsp_wait_for_cmd_compl(pdev);
+
+	/*
+	 * After Reset Device command all not default endpoints
+	 * are in Disabled state.
+	 */
+	for (i = 1; i < CDNSP_ENDPOINTS_NUM; ++i)
+		pdev->eps[i].ep_state |= EP_STOPPED | EP_UNCONFIGURED;
+
+	trace_cdnsp_handle_cmd_reset_dev(slot_ctx);
+
+	if (ret)
+		dev_err(pdev->dev, "Reset device failed with error code %d",
+			ret);
+
+	return ret;
+}
+
+/*
+ * Sets the MaxPStreams field and the Linear Stream Array field.
+ * Sets the dequeue pointer to the stream context array.
+ */
+static void cdnsp_setup_streams_ep_input_ctx(struct cdnsp_device *pdev,
+					     struct cdnsp_ep_ctx *ep_ctx,
+					     struct cdnsp_stream_info *stream_info)
+{
+	u32 max_primary_streams;
+
+	/* MaxPStreams is the number of stream context array entries, not the
+	 * number we're actually using. Must be in 2^(MaxPstreams + 1) format.
+	 * fls(0) = 0, fls(0x1) = 1, fls(0x10) = 2, fls(0x100) = 3, etc.
+	 */
+	max_primary_streams = fls(stream_info->num_stream_ctxs) - 2;
+	ep_ctx->ep_info &= cpu_to_le32(~EP_MAXPSTREAMS_MASK);
+	ep_ctx->ep_info |= cpu_to_le32(EP_MAXPSTREAMS(max_primary_streams)
+				       | EP_HAS_LSA);
+	ep_ctx->deq  = cpu_to_le64(stream_info->ctx_array_dma);
+}
+
+/*
+ * The drivers use this function to prepare a bulk endpoints to use streams.
+ *
+ * Don't allow the call to succeed if endpoint only supports one stream
+ * (which means it doesn't support streams at all).
+ */
+int cdnsp_alloc_streams(struct cdnsp_device *pdev, struct cdnsp_ep *pep)
+{
+	unsigned int num_streams = usb_ss_max_streams(pep->endpoint.comp_desc);
+	unsigned int num_stream_ctxs;
+	int ret;
+
+	if (num_streams ==  0)
+		return 0;
+
+	if (num_streams > STREAM_NUM_STREAMS)
+		return -EINVAL;
+
+	/*
+	 * Add two to the number of streams requested to account for
+	 * stream 0 that is reserved for controller usage and one additional
+	 * for TASK SET FULL response.
+	 */
+	num_streams += 2;
+
+	/* The stream context array size must be a power of two */
+	num_stream_ctxs = roundup_pow_of_two(num_streams);
+
+	trace_cdnsp_stream_number(pep, num_stream_ctxs, num_streams);
+
+	ret = cdnsp_alloc_stream_info(pdev, pep, num_stream_ctxs, num_streams);
+	if (ret)
+		return ret;
+
+	cdnsp_setup_streams_ep_input_ctx(pdev, pep->in_ctx, &pep->stream_info);
+
+	pep->ep_state |= EP_HAS_STREAMS;
+	pep->stream_info.td_count = 0;
+	pep->stream_info.first_prime_det = 0;
+
+	/* Subtract 1 for stream 0, which drivers can't use. */
+	return num_streams - 1;
+}
+
+int cdnsp_disable_slot(struct cdnsp_device *pdev)
+{
+	int ret;
+
+	cdnsp_queue_slot_control(pdev, TRB_DISABLE_SLOT);
+	cdnsp_ring_cmd_db(pdev);
+	ret = cdnsp_wait_for_cmd_compl(pdev);
+
+	pdev->slot_id = 0;
+	pdev->active_port = NULL;
+
+	trace_cdnsp_handle_cmd_disable_slot(cdnsp_get_slot_ctx(&pdev->out_ctx));
+
+	memset(pdev->in_ctx.bytes, 0, CDNSP_CTX_SIZE);
+	memset(pdev->out_ctx.bytes, 0, CDNSP_CTX_SIZE);
+
+	return ret;
+}
+
+int cdnsp_enable_slot(struct cdnsp_device *pdev)
+{
+	struct cdnsp_slot_ctx *slot_ctx;
+	int slot_state;
+	int ret;
+
+	/* If device is not setup, there is no point in resetting it */
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->out_ctx);
+	slot_state = GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state));
+
+	if (slot_state != SLOT_STATE_DISABLED)
+		return 0;
+
+	cdnsp_queue_slot_control(pdev, TRB_ENABLE_SLOT);
+	cdnsp_ring_cmd_db(pdev);
+	ret = cdnsp_wait_for_cmd_compl(pdev);
+	if (ret)
+		goto show_trace;
+
+	pdev->slot_id = 1;
+
+show_trace:
+	trace_cdnsp_handle_cmd_enable_slot(cdnsp_get_slot_ctx(&pdev->out_ctx));
+
+	return ret;
+}
+
+/*
+ * Issue an Address Device command with BSR=0 if setup is SETUP_CONTEXT_ONLY
+ * or with BSR = 1 if set_address is SETUP_CONTEXT_ADDRESS.
+ */
+int cdnsp_setup_device(struct cdnsp_device *pdev, enum cdnsp_setup_dev setup)
+{
+	struct cdnsp_input_control_ctx *ctrl_ctx;
+	struct cdnsp_slot_ctx *slot_ctx;
+	int dev_state = 0;
+	int ret;
+
+	if (!pdev->slot_id) {
+		trace_cdnsp_slot_id("incorrect");
+		return -EINVAL;
+	}
+
+	if (!pdev->active_port->port_num)
+		return -EINVAL;
+
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->out_ctx);
+	dev_state = GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state));
+
+	if (setup == SETUP_CONTEXT_ONLY && dev_state == SLOT_STATE_DEFAULT) {
+		trace_cdnsp_slot_already_in_default(slot_ctx);
+		return 0;
+	}
+
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->in_ctx);
+	ctrl_ctx = cdnsp_get_input_control_ctx(&pdev->in_ctx);
+
+	if (!slot_ctx->dev_info || dev_state == SLOT_STATE_DEFAULT) {
+		ret = cdnsp_setup_addressable_priv_dev(pdev);
+		if (ret)
+			return ret;
+	}
+
+	cdnsp_copy_ep0_dequeue_into_input_ctx(pdev);
+
+	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
+	ctrl_ctx->drop_flags = 0;
+
+	trace_cdnsp_setup_device_slot(slot_ctx);
+
+	cdnsp_queue_address_device(pdev, pdev->in_ctx.dma, setup);
+	cdnsp_ring_cmd_db(pdev);
+	ret = cdnsp_wait_for_cmd_compl(pdev);
+
+	trace_cdnsp_handle_cmd_addr_dev(cdnsp_get_slot_ctx(&pdev->out_ctx));
+
+	/* Zero the input context control for later use. */
+	ctrl_ctx->add_flags = 0;
+	ctrl_ctx->drop_flags = 0;
+
+	return ret;
+}
+
+void cdnsp_set_usb2_hardware_lpm(struct cdnsp_device *pdev,
+				 struct usb_request *req,
+				 int enable)
+{
+	if (pdev->active_port != &pdev->usb2_port || !pdev->gadget.lpm_capable)
+		return;
+
+	trace_cdnsp_lpm(enable);
+
+	if (enable)
+		writel(PORT_BESL(CDNSP_DEFAULT_BESL) | PORT_L1S_NYET | PORT_HLE,
+		       &pdev->active_port->regs->portpmsc);
+	else
+		writel(PORT_L1S_NYET, &pdev->active_port->regs->portpmsc);
+}
+
+static int cdnsp_get_frame(struct cdnsp_device *pdev)
+{
+	return readl(&pdev->run_regs->microframe_index) >> 3;
+}
+
+static int cdnsp_gadget_ep_enable(struct usb_ep *ep,
+				  const struct usb_endpoint_descriptor *desc)
+{
+	struct cdnsp_input_control_ctx *ctrl_ctx;
+	struct cdnsp_device *pdev;
+	struct cdnsp_ep *pep;
+	unsigned long flags;
+	u32 added_ctxs;
+	int ret;
+
+	if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT ||
+	    !desc->wMaxPacketSize)
+		return -EINVAL;
+
+	pep = to_cdnsp_ep(ep);
+	pdev = pep->pdev;
+	pep->ep_state &= ~EP_UNCONFIGURED;
+
+	if (dev_WARN_ONCE(pdev->dev, pep->ep_state & EP_ENABLED,
+			  "%s is already enabled\n", pep->name))
+		return 0;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+
+	added_ctxs = cdnsp_get_endpoint_flag(desc);
+	if (added_ctxs == SLOT_FLAG || added_ctxs == EP0_FLAG) {
+		dev_err(pdev->dev, "ERROR: Bad endpoint number\n");
+		ret = -EINVAL;
+		goto unlock;
+	}
+
+	pep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0;
+
+	if (pdev->gadget.speed == USB_SPEED_FULL) {
+		if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT)
+			pep->interval = desc->bInterval << 3;
+		if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_ISOC)
+			pep->interval = BIT(desc->bInterval - 1) << 3;
+	}
+
+	if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_ISOC) {
+		if (pep->interval > BIT(12)) {
+			dev_err(pdev->dev, "bInterval %d not supported\n",
+				desc->bInterval);
+			ret = -EINVAL;
+			goto unlock;
+		}
+		cdnsp_set_chicken_bits_2(pdev, CHICKEN_XDMA_2_TP_CACHE_DIS);
+	}
+
+	ret = cdnsp_endpoint_init(pdev, pep, GFP_ATOMIC);
+	if (ret)
+		goto unlock;
+
+	ctrl_ctx = cdnsp_get_input_control_ctx(&pdev->in_ctx);
+	ctrl_ctx->add_flags = cpu_to_le32(added_ctxs);
+	ctrl_ctx->drop_flags = 0;
+
+	ret = cdnsp_update_eps_configuration(pdev, pep);
+	if (ret) {
+		cdnsp_free_endpoint_rings(pdev, pep);
+		goto unlock;
+	}
+
+	pep->ep_state |= EP_ENABLED;
+	pep->ep_state &= ~EP_STOPPED;
+
+unlock:
+	trace_cdnsp_ep_enable_end(pep, 0);
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return ret;
+}
+
+static int cdnsp_gadget_ep_disable(struct usb_ep *ep)
+{
+	struct cdnsp_input_control_ctx *ctrl_ctx;
+	struct cdnsp_request *preq;
+	struct cdnsp_device *pdev;
+	struct cdnsp_ep *pep;
+	unsigned long flags;
+	u32 drop_flag;
+	int ret = 0;
+
+	if (!ep)
+		return -EINVAL;
+
+	pep = to_cdnsp_ep(ep);
+	pdev = pep->pdev;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+
+	if (!(pep->ep_state & EP_ENABLED)) {
+		dev_err(pdev->dev, "%s is already disabled\n", pep->name);
+		ret = -EINVAL;
+		goto finish;
+	}
+
+	pep->ep_state |= EP_DIS_IN_RROGRESS;
+
+	/* Endpoint was unconfigured by Reset Device command. */
+	if (!(pep->ep_state & EP_UNCONFIGURED)) {
+		cdnsp_cmd_stop_ep(pdev, pep);
+		cdnsp_cmd_flush_ep(pdev, pep);
+	}
+
+	/* Remove all queued USB requests. */
+	while (!list_empty(&pep->pending_list)) {
+		preq = next_request(&pep->pending_list);
+		cdnsp_ep_dequeue(pep, preq);
+	}
+
+	cdnsp_invalidate_ep_events(pdev, pep);
+
+	pep->ep_state &= ~EP_DIS_IN_RROGRESS;
+	drop_flag = cdnsp_get_endpoint_flag(pep->endpoint.desc);
+	ctrl_ctx = cdnsp_get_input_control_ctx(&pdev->in_ctx);
+	ctrl_ctx->drop_flags = cpu_to_le32(drop_flag);
+	ctrl_ctx->add_flags = 0;
+
+	cdnsp_endpoint_zero(pdev, pep);
+
+	if (!(pep->ep_state & EP_UNCONFIGURED))
+		ret = cdnsp_update_eps_configuration(pdev, pep);
+
+	cdnsp_free_endpoint_rings(pdev, pep);
+
+	pep->ep_state &= ~(EP_ENABLED | EP_UNCONFIGURED);
+	pep->ep_state |= EP_STOPPED;
+
+finish:
+	trace_cdnsp_ep_disable_end(pep, 0);
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return ret;
+}
+
+static struct usb_request *cdnsp_gadget_ep_alloc_request(struct usb_ep *ep,
+							 gfp_t gfp_flags)
+{
+	struct cdnsp_ep *pep = to_cdnsp_ep(ep);
+	struct cdnsp_request *preq;
+
+	preq = kzalloc(sizeof(*preq), gfp_flags);
+	if (!preq)
+		return NULL;
+
+	preq->epnum = pep->number;
+	preq->pep = pep;
+
+	trace_cdnsp_alloc_request(preq);
+
+	return &preq->request;
+}
+
+static void cdnsp_gadget_ep_free_request(struct usb_ep *ep,
+					 struct usb_request *request)
+{
+	struct cdnsp_request *preq = to_cdnsp_request(request);
+
+	trace_cdnsp_free_request(preq);
+	kfree(preq);
+}
+
+static int cdnsp_gadget_ep_queue(struct usb_ep *ep,
+				 struct usb_request *request,
+				 gfp_t gfp_flags)
+{
+	struct cdnsp_request *preq;
+	struct cdnsp_device *pdev;
+	struct cdnsp_ep *pep;
+	unsigned long flags;
+	int ret;
+
+	if (!request || !ep)
+		return -EINVAL;
+
+	pep = to_cdnsp_ep(ep);
+	pdev = pep->pdev;
+
+	if (!(pep->ep_state & EP_ENABLED)) {
+		dev_err(pdev->dev, "%s: can't queue to disabled endpoint\n",
+			pep->name);
+		return -EINVAL;
+	}
+
+	preq = to_cdnsp_request(request);
+	spin_lock_irqsave(&pdev->lock, flags);
+	ret = cdnsp_ep_enqueue(pep, preq);
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return ret;
+}
+
+static int cdnsp_gadget_ep_dequeue(struct usb_ep *ep,
+				   struct usb_request *request)
+{
+	struct cdnsp_ep *pep = to_cdnsp_ep(ep);
+	struct cdnsp_device *pdev = pep->pdev;
+	unsigned long flags;
+	int ret;
+
+	if (request->status != -EINPROGRESS)
+		return 0;
+
+	if (!pep->endpoint.desc) {
+		dev_err(pdev->dev,
+			"%s: can't dequeue to disabled endpoint\n",
+			pep->name);
+		return -ESHUTDOWN;
+	}
+
+	/* Requests has been dequeued during disabling endpoint. */
+	if (!(pep->ep_state & EP_ENABLED))
+		return 0;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+	ret = cdnsp_ep_dequeue(pep, to_cdnsp_request(request));
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return ret;
+}
+
+static int cdnsp_gadget_ep_set_halt(struct usb_ep *ep, int value)
+{
+	struct cdnsp_ep *pep = to_cdnsp_ep(ep);
+	struct cdnsp_device *pdev = pep->pdev;
+	struct cdnsp_request *preq;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+
+	preq = next_request(&pep->pending_list);
+	if (value) {
+		if (preq) {
+			trace_cdnsp_ep_busy_try_halt_again(pep, 0);
+			ret = -EAGAIN;
+			goto done;
+		}
+	}
+
+	ret = cdnsp_halt_endpoint(pdev, pep, value);
+
+done:
+	spin_unlock_irqrestore(&pdev->lock, flags);
+	return ret;
+}
+
+static int cdnsp_gadget_ep_set_wedge(struct usb_ep *ep)
+{
+	struct cdnsp_ep *pep = to_cdnsp_ep(ep);
+	struct cdnsp_device *pdev = pep->pdev;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+	pep->ep_state |= EP_WEDGE;
+	ret = cdnsp_halt_endpoint(pdev, pep, 1);
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return ret;
+}
+
+static const struct usb_ep_ops cdnsp_gadget_ep0_ops = {
+	.enable		= cdnsp_gadget_ep_enable,
+	.disable	= cdnsp_gadget_ep_disable,
+	.alloc_request	= cdnsp_gadget_ep_alloc_request,
+	.free_request	= cdnsp_gadget_ep_free_request,
+	.queue		= cdnsp_gadget_ep_queue,
+	.dequeue	= cdnsp_gadget_ep_dequeue,
+	.set_halt	= cdnsp_gadget_ep_set_halt,
+	.set_wedge	= cdnsp_gadget_ep_set_wedge,
+};
+
+static const struct usb_ep_ops cdnsp_gadget_ep_ops = {
+	.enable		= cdnsp_gadget_ep_enable,
+	.disable	= cdnsp_gadget_ep_disable,
+	.alloc_request	= cdnsp_gadget_ep_alloc_request,
+	.free_request	= cdnsp_gadget_ep_free_request,
+	.queue		= cdnsp_gadget_ep_queue,
+	.dequeue	= cdnsp_gadget_ep_dequeue,
+	.set_halt	= cdnsp_gadget_ep_set_halt,
+	.set_wedge	= cdnsp_gadget_ep_set_wedge,
+};
+
+void cdnsp_gadget_giveback(struct cdnsp_ep *pep,
+			   struct cdnsp_request *preq,
+			   int status)
+{
+	struct cdnsp_device *pdev = pep->pdev;
+
+	list_del(&preq->list);
+
+	if (preq->request.status == -EINPROGRESS)
+		preq->request.status = status;
+
+	usb_gadget_unmap_request_by_dev(pdev->dev, &preq->request,
+					preq->direction);
+
+	trace_cdnsp_request_giveback(preq);
+
+	if (preq != &pdev->ep0_preq) {
+		spin_unlock(&pdev->lock);
+		usb_gadget_giveback_request(&pep->endpoint, &preq->request);
+		spin_lock(&pdev->lock);
+	}
+}
+
+static struct usb_endpoint_descriptor cdnsp_gadget_ep0_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_CONTROL,
+};
+
+static int cdnsp_run(struct cdnsp_device *pdev,
+		     enum usb_device_speed speed)
+{
+	u32 fs_speed = 0;
+	u32 temp;
+	int ret;
+
+	temp = readl(&pdev->ir_set->irq_control);
+	temp &= ~IMOD_INTERVAL_MASK;
+	temp |= ((IMOD_DEFAULT_INTERVAL / 250) & IMOD_INTERVAL_MASK);
+	writel(temp, &pdev->ir_set->irq_control);
+
+	temp = readl(&pdev->port3x_regs->mode_addr);
+
+	switch (speed) {
+	case USB_SPEED_SUPER_PLUS:
+		temp |= CFG_3XPORT_SSP_SUPPORT;
+		break;
+	case USB_SPEED_SUPER:
+		temp &= ~CFG_3XPORT_SSP_SUPPORT;
+		break;
+	case USB_SPEED_HIGH:
+		break;
+	case USB_SPEED_FULL:
+		fs_speed = PORT_REG6_FORCE_FS;
+		break;
+	default:
+		dev_err(pdev->dev, "invalid maximum_speed parameter %d\n",
+			speed);
+		fallthrough;
+	case USB_SPEED_UNKNOWN:
+		/* Default to superspeed. */
+		speed = USB_SPEED_SUPER;
+		break;
+	}
+
+	if (speed >= USB_SPEED_SUPER) {
+		writel(temp, &pdev->port3x_regs->mode_addr);
+		cdnsp_set_link_state(pdev, &pdev->usb3_port.regs->portsc,
+				     XDEV_RXDETECT);
+	} else {
+		cdnsp_disable_port(pdev, &pdev->usb3_port.regs->portsc);
+	}
+
+	cdnsp_set_link_state(pdev, &pdev->usb2_port.regs->portsc,
+			     XDEV_RXDETECT);
+
+	cdnsp_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
+
+	writel(PORT_REG6_L1_L0_HW_EN | fs_speed, &pdev->port20_regs->port_reg6);
+
+	ret = cdnsp_start(pdev);
+	if (ret) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	temp = readl(&pdev->op_regs->command);
+	temp |= (CMD_INTE);
+	writel(temp, &pdev->op_regs->command);
+
+	temp = readl(&pdev->ir_set->irq_pending);
+	writel(IMAN_IE_SET(temp), &pdev->ir_set->irq_pending);
+
+	trace_cdnsp_init("Controller ready to work");
+	return 0;
+err:
+	cdnsp_halt(pdev);
+	return ret;
+}
+
+static int cdnsp_gadget_udc_start(struct usb_gadget *g,
+				  struct usb_gadget_driver *driver)
+{
+	enum usb_device_speed max_speed = driver->max_speed;
+	struct cdnsp_device *pdev = gadget_to_cdnsp(g);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+	pdev->gadget_driver = driver;
+
+	/* limit speed if necessary */
+	max_speed = min(driver->max_speed, g->max_speed);
+	ret = cdnsp_run(pdev, max_speed);
+
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return ret;
+}
+
+/*
+ * Update Event Ring Dequeue Pointer:
+ * - When all events have finished
+ * - To avoid "Event Ring Full Error" condition
+ */
+void cdnsp_update_erst_dequeue(struct cdnsp_device *pdev,
+			       union cdnsp_trb *event_ring_deq,
+			       u8 clear_ehb)
+{
+	u64 temp_64;
+	dma_addr_t deq;
+
+	temp_64 = cdnsp_read_64(&pdev->ir_set->erst_dequeue);
+
+	/* If necessary, update the HW's version of the event ring deq ptr. */
+	if (event_ring_deq != pdev->event_ring->dequeue) {
+		deq = cdnsp_trb_virt_to_dma(pdev->event_ring->deq_seg,
+					    pdev->event_ring->dequeue);
+		temp_64 &= ERST_PTR_MASK;
+		temp_64 |= ((u64)deq & (u64)~ERST_PTR_MASK);
+	}
+
+	/* Clear the event handler busy flag (RW1C). */
+	if (clear_ehb)
+		temp_64 |= ERST_EHB;
+	else
+		temp_64 &= ~ERST_EHB;
+
+	cdnsp_write_64(temp_64, &pdev->ir_set->erst_dequeue);
+}
+
+static void cdnsp_clear_cmd_ring(struct cdnsp_device *pdev)
+{
+	struct cdnsp_segment *seg;
+	u64 val_64;
+	int i;
+
+	cdnsp_initialize_ring_info(pdev->cmd_ring);
+
+	seg = pdev->cmd_ring->first_seg;
+	for (i = 0; i < pdev->cmd_ring->num_segs; i++) {
+		memset(seg->trbs, 0,
+		       sizeof(union cdnsp_trb) * (TRBS_PER_SEGMENT - 1));
+		seg = seg->next;
+	}
+
+	/* Set the address in the Command Ring Control register. */
+	val_64 = cdnsp_read_64(&pdev->op_regs->cmd_ring);
+	val_64 = (val_64 & (u64)CMD_RING_RSVD_BITS) |
+		 (pdev->cmd_ring->first_seg->dma & (u64)~CMD_RING_RSVD_BITS) |
+		 pdev->cmd_ring->cycle_state;
+	cdnsp_write_64(val_64, &pdev->op_regs->cmd_ring);
+}
+
+static void cdnsp_consume_all_events(struct cdnsp_device *pdev)
+{
+	struct cdnsp_segment *event_deq_seg;
+	union cdnsp_trb *event_ring_deq;
+	union cdnsp_trb *event;
+	u32 cycle_bit;
+
+	event_ring_deq = pdev->event_ring->dequeue;
+	event_deq_seg = pdev->event_ring->deq_seg;
+	event = pdev->event_ring->dequeue;
+
+	/* Update ring dequeue pointer. */
+	while (1) {
+		cycle_bit = (le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE);
+
+		/* Does the controller or driver own the TRB? */
+		if (cycle_bit != pdev->event_ring->cycle_state)
+			break;
+
+		cdnsp_inc_deq(pdev, pdev->event_ring);
+
+		if (!cdnsp_last_trb_on_seg(event_deq_seg, event)) {
+			event++;
+			continue;
+		}
+
+		if (cdnsp_last_trb_on_ring(pdev->event_ring, event_deq_seg,
+					   event))
+			cycle_bit ^= 1;
+
+		event_deq_seg = event_deq_seg->next;
+		event = event_deq_seg->trbs;
+	}
+
+	cdnsp_update_erst_dequeue(pdev,  event_ring_deq, 1);
+}
+
+static void cdnsp_stop(struct cdnsp_device *pdev)
+{
+	u32 temp;
+
+	cdnsp_cmd_flush_ep(pdev, &pdev->eps[0]);
+
+	/* Remove internally queued request for ep0. */
+	if (!list_empty(&pdev->eps[0].pending_list)) {
+		struct cdnsp_request *req;
+
+		req = next_request(&pdev->eps[0].pending_list);
+		if (req == &pdev->ep0_preq)
+			cdnsp_ep_dequeue(&pdev->eps[0], req);
+	}
+
+	cdnsp_disable_port(pdev, &pdev->usb2_port.regs->portsc);
+	cdnsp_disable_port(pdev, &pdev->usb3_port.regs->portsc);
+	cdnsp_disable_slot(pdev);
+	cdnsp_halt(pdev);
+
+	temp = readl(&pdev->op_regs->status);
+	writel((temp & ~0x1fff) | STS_EINT, &pdev->op_regs->status);
+	temp = readl(&pdev->ir_set->irq_pending);
+	writel(IMAN_IE_CLEAR(temp), &pdev->ir_set->irq_pending);
+
+	cdnsp_clear_port_change_bit(pdev, &pdev->usb2_port.regs->portsc);
+	cdnsp_clear_port_change_bit(pdev, &pdev->usb3_port.regs->portsc);
+
+	/* Clear interrupt line */
+	temp = readl(&pdev->ir_set->irq_pending);
+	temp |= IMAN_IP;
+	writel(temp, &pdev->ir_set->irq_pending);
+
+	cdnsp_consume_all_events(pdev);
+	cdnsp_clear_cmd_ring(pdev);
+
+	trace_cdnsp_exit("Controller stopped.");
+}
+
+/*
+ * Stop controller.
+ * This function is called by the gadget core when the driver is removed.
+ * Disable slot, disable IRQs, and quiesce the controller.
+ */
+static int cdnsp_gadget_udc_stop(struct usb_gadget *g)
+{
+	struct cdnsp_device *pdev = gadget_to_cdnsp(g);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+	cdnsp_stop(pdev);
+	pdev->gadget_driver = NULL;
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return 0;
+}
+
+static int cdnsp_gadget_get_frame(struct usb_gadget *g)
+{
+	struct cdnsp_device *pdev = gadget_to_cdnsp(g);
+
+	return cdnsp_get_frame(pdev);
+}
+
+static void __cdnsp_gadget_wakeup(struct cdnsp_device *pdev)
+{
+	struct cdnsp_port_regs __iomem *port_regs;
+	u32 portpm, portsc;
+
+	port_regs = pdev->active_port->regs;
+	portsc = readl(&port_regs->portsc) & PORT_PLS_MASK;
+
+	/* Remote wakeup feature is not enabled by host. */
+	if (pdev->gadget.speed < USB_SPEED_SUPER && portsc == XDEV_U2) {
+		portpm = readl(&port_regs->portpmsc);
+
+		if (!(portpm & PORT_RWE))
+			return;
+	}
+
+	if (portsc == XDEV_U3 && !pdev->may_wakeup)
+		return;
+
+	cdnsp_set_link_state(pdev, &port_regs->portsc, XDEV_U0);
+
+	pdev->cdnsp_state |= CDNSP_WAKEUP_PENDING;
+}
+
+static int cdnsp_gadget_wakeup(struct usb_gadget *g)
+{
+	struct cdnsp_device *pdev = gadget_to_cdnsp(g);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+	__cdnsp_gadget_wakeup(pdev);
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return 0;
+}
+
+static int cdnsp_gadget_set_selfpowered(struct usb_gadget *g,
+					int is_selfpowered)
+{
+	struct cdnsp_device *pdev = gadget_to_cdnsp(g);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+	g->is_selfpowered = !!is_selfpowered;
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return 0;
+}
+
+static int cdnsp_gadget_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct cdnsp_device *pdev = gadget_to_cdnsp(gadget);
+	struct cdns *cdns = dev_get_drvdata(pdev->dev);
+	unsigned long flags;
+
+	trace_cdnsp_pullup(is_on);
+
+	/*
+	 * Disable events handling while controller is being
+	 * enabled/disabled.
+	 */
+	disable_irq(cdns->dev_irq);
+	spin_lock_irqsave(&pdev->lock, flags);
+
+	if (!is_on) {
+		cdnsp_reset_device(pdev);
+		cdns_clear_vbus(cdns);
+	} else {
+		cdns_set_vbus(cdns);
+	}
+
+	spin_unlock_irqrestore(&pdev->lock, flags);
+	enable_irq(cdns->dev_irq);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops cdnsp_gadget_ops = {
+	.get_frame		= cdnsp_gadget_get_frame,
+	.wakeup			= cdnsp_gadget_wakeup,
+	.set_selfpowered	= cdnsp_gadget_set_selfpowered,
+	.pullup			= cdnsp_gadget_pullup,
+	.udc_start		= cdnsp_gadget_udc_start,
+	.udc_stop		= cdnsp_gadget_udc_stop,
+};
+
+static void cdnsp_get_ep_buffering(struct cdnsp_device *pdev,
+				   struct cdnsp_ep *pep)
+{
+	void __iomem *reg = &pdev->cap_regs->hc_capbase;
+	int endpoints;
+
+	reg += cdnsp_find_next_ext_cap(reg, 0, XBUF_CAP_ID);
+
+	if (!pep->direction) {
+		pep->buffering = readl(reg + XBUF_RX_TAG_MASK_0_OFFSET);
+		pep->buffering_period = readl(reg + XBUF_RX_TAG_MASK_1_OFFSET);
+		pep->buffering = (pep->buffering + 1) / 2;
+		pep->buffering_period = (pep->buffering_period + 1) / 2;
+		return;
+	}
+
+	endpoints = HCS_ENDPOINTS(pdev->hcs_params1) / 2;
+
+	/* Set to XBUF_TX_TAG_MASK_0 register. */
+	reg += XBUF_TX_CMD_OFFSET + (endpoints * 2 + 2) * sizeof(u32);
+	/* Set reg to XBUF_TX_TAG_MASK_N related with this endpoint. */
+	reg += pep->number * sizeof(u32) * 2;
+
+	pep->buffering = (readl(reg) + 1) / 2;
+	pep->buffering_period = pep->buffering;
+}
+
+static int cdnsp_gadget_init_endpoints(struct cdnsp_device *pdev)
+{
+	int max_streams = HCC_MAX_PSA(pdev->hcc_params);
+	struct cdnsp_ep *pep;
+	int i;
+
+	INIT_LIST_HEAD(&pdev->gadget.ep_list);
+
+	if (max_streams < STREAM_LOG_STREAMS) {
+		dev_err(pdev->dev, "Stream size %d not supported\n",
+			max_streams);
+		return -EINVAL;
+	}
+
+	max_streams = STREAM_LOG_STREAMS;
+
+	for (i = 0; i < CDNSP_ENDPOINTS_NUM; i++) {
+		bool direction = !(i & 1); /* Start from OUT endpoint. */
+		u8 epnum = ((i + 1) >> 1);
+
+		if (!CDNSP_IF_EP_EXIST(pdev, epnum, direction))
+			continue;
+
+		pep = &pdev->eps[i];
+		pep->pdev = pdev;
+		pep->number = epnum;
+		pep->direction = direction; /* 0 for OUT, 1 for IN. */
+
+		/*
+		 * Ep0 is bidirectional, so ep0in and ep0out are represented by
+		 * pdev->eps[0]
+		 */
+		if (epnum == 0) {
+			snprintf(pep->name, sizeof(pep->name), "ep%d%s",
+				 epnum, "BiDir");
+
+			pep->idx = 0;
+			usb_ep_set_maxpacket_limit(&pep->endpoint, 512);
+			pep->endpoint.maxburst = 1;
+			pep->endpoint.ops = &cdnsp_gadget_ep0_ops;
+			pep->endpoint.desc = &cdnsp_gadget_ep0_desc;
+			pep->endpoint.comp_desc = NULL;
+			pep->endpoint.caps.type_control = true;
+			pep->endpoint.caps.dir_in = true;
+			pep->endpoint.caps.dir_out = true;
+
+			pdev->ep0_preq.epnum = pep->number;
+			pdev->ep0_preq.pep = pep;
+			pdev->gadget.ep0 = &pep->endpoint;
+		} else {
+			snprintf(pep->name, sizeof(pep->name), "ep%d%s",
+				 epnum, (pep->direction) ? "in" : "out");
+
+			pep->idx =  (epnum * 2 + (direction ? 1 : 0)) - 1;
+			usb_ep_set_maxpacket_limit(&pep->endpoint, 1024);
+
+			pep->endpoint.max_streams = max_streams;
+			pep->endpoint.ops = &cdnsp_gadget_ep_ops;
+			list_add_tail(&pep->endpoint.ep_list,
+				      &pdev->gadget.ep_list);
+
+			pep->endpoint.caps.type_iso = true;
+			pep->endpoint.caps.type_bulk = true;
+			pep->endpoint.caps.type_int = true;
+
+			pep->endpoint.caps.dir_in = direction;
+			pep->endpoint.caps.dir_out = !direction;
+		}
+
+		pep->endpoint.name = pep->name;
+		pep->in_ctx = cdnsp_get_ep_ctx(&pdev->in_ctx, pep->idx);
+		pep->out_ctx = cdnsp_get_ep_ctx(&pdev->out_ctx, pep->idx);
+		cdnsp_get_ep_buffering(pdev, pep);
+
+		dev_dbg(pdev->dev, "Init %s, MPS: %04x SupType: "
+			"CTRL: %s, INT: %s, BULK: %s, ISOC %s, "
+			"SupDir IN: %s, OUT: %s\n",
+			pep->name, 1024,
+			(pep->endpoint.caps.type_control) ? "yes" : "no",
+			(pep->endpoint.caps.type_int) ? "yes" : "no",
+			(pep->endpoint.caps.type_bulk) ? "yes" : "no",
+			(pep->endpoint.caps.type_iso) ? "yes" : "no",
+			(pep->endpoint.caps.dir_in) ? "yes" : "no",
+			(pep->endpoint.caps.dir_out) ? "yes" : "no");
+
+		INIT_LIST_HEAD(&pep->pending_list);
+	}
+
+	return 0;
+}
+
+static void cdnsp_gadget_free_endpoints(struct cdnsp_device *pdev)
+{
+	struct cdnsp_ep *pep;
+	int i;
+
+	for (i = 0; i < CDNSP_ENDPOINTS_NUM; i++) {
+		pep = &pdev->eps[i];
+		if (pep->number != 0 && pep->out_ctx)
+			list_del(&pep->endpoint.ep_list);
+	}
+}
+
+void cdnsp_disconnect_gadget(struct cdnsp_device *pdev)
+{
+	pdev->cdnsp_state |= CDNSP_STATE_DISCONNECT_PENDING;
+
+	if (pdev->gadget_driver && pdev->gadget_driver->disconnect) {
+		spin_unlock(&pdev->lock);
+		pdev->gadget_driver->disconnect(&pdev->gadget);
+		spin_lock(&pdev->lock);
+	}
+
+	pdev->gadget.speed = USB_SPEED_UNKNOWN;
+	usb_gadget_set_state(&pdev->gadget, USB_STATE_NOTATTACHED);
+
+	pdev->cdnsp_state &= ~CDNSP_STATE_DISCONNECT_PENDING;
+}
+
+void cdnsp_suspend_gadget(struct cdnsp_device *pdev)
+{
+	if (pdev->gadget_driver && pdev->gadget_driver->suspend) {
+		spin_unlock(&pdev->lock);
+		pdev->gadget_driver->suspend(&pdev->gadget);
+		spin_lock(&pdev->lock);
+	}
+}
+
+void cdnsp_resume_gadget(struct cdnsp_device *pdev)
+{
+	if (pdev->gadget_driver && pdev->gadget_driver->resume) {
+		spin_unlock(&pdev->lock);
+		pdev->gadget_driver->resume(&pdev->gadget);
+		spin_lock(&pdev->lock);
+	}
+}
+
+void cdnsp_irq_reset(struct cdnsp_device *pdev)
+{
+	struct cdnsp_port_regs __iomem *port_regs;
+
+	cdnsp_reset_device(pdev);
+
+	port_regs = pdev->active_port->regs;
+	pdev->gadget.speed = cdnsp_port_speed(readl(port_regs));
+
+	spin_unlock(&pdev->lock);
+	usb_gadget_udc_reset(&pdev->gadget, pdev->gadget_driver);
+	spin_lock(&pdev->lock);
+
+	switch (pdev->gadget.speed) {
+	case USB_SPEED_SUPER_PLUS:
+	case USB_SPEED_SUPER:
+		cdnsp_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
+		pdev->gadget.ep0->maxpacket = 512;
+		break;
+	case USB_SPEED_HIGH:
+	case USB_SPEED_FULL:
+		cdnsp_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
+		pdev->gadget.ep0->maxpacket = 64;
+		break;
+	default:
+		/* Low speed is not supported. */
+		dev_err(pdev->dev, "Unknown device speed\n");
+		break;
+	}
+
+	cdnsp_clear_chicken_bits_2(pdev, CHICKEN_XDMA_2_TP_CACHE_DIS);
+	cdnsp_setup_device(pdev, SETUP_CONTEXT_ONLY);
+	usb_gadget_set_state(&pdev->gadget, USB_STATE_DEFAULT);
+}
+
+static void cdnsp_get_rev_cap(struct cdnsp_device *pdev)
+{
+	void __iomem *reg = &pdev->cap_regs->hc_capbase;
+
+	reg += cdnsp_find_next_ext_cap(reg, 0, RTL_REV_CAP);
+	pdev->rev_cap  = reg;
+
+	dev_info(pdev->dev, "Rev: %08x/%08x, eps: %08x, buff: %08x/%08x\n",
+		 readl(&pdev->rev_cap->ctrl_revision),
+		 readl(&pdev->rev_cap->rtl_revision),
+		 readl(&pdev->rev_cap->ep_supported),
+		 readl(&pdev->rev_cap->rx_buff_size),
+		 readl(&pdev->rev_cap->tx_buff_size));
+}
+
+static int cdnsp_gen_setup(struct cdnsp_device *pdev)
+{
+	int ret;
+	u32 reg;
+
+	pdev->cap_regs = pdev->regs;
+	pdev->op_regs = pdev->regs +
+		HC_LENGTH(readl(&pdev->cap_regs->hc_capbase));
+	pdev->run_regs = pdev->regs +
+		(readl(&pdev->cap_regs->run_regs_off) & RTSOFF_MASK);
+
+	/* Cache read-only capability registers */
+	pdev->hcs_params1 = readl(&pdev->cap_regs->hcs_params1);
+	pdev->hcc_params = readl(&pdev->cap_regs->hc_capbase);
+	pdev->hci_version = HC_VERSION(pdev->hcc_params);
+	pdev->hcc_params = readl(&pdev->cap_regs->hcc_params);
+
+	cdnsp_get_rev_cap(pdev);
+
+	/* Make sure the Device Controller is halted. */
+	ret = cdnsp_halt(pdev);
+	if (ret)
+		return ret;
+
+	/* Reset the internal controller memory state and registers. */
+	ret = cdnsp_reset(pdev);
+	if (ret)
+		return ret;
+
+	/*
+	 * Set dma_mask and coherent_dma_mask to 64-bits,
+	 * if controller supports 64-bit addressing.
+	 */
+	if (HCC_64BIT_ADDR(pdev->hcc_params) &&
+	    !dma_set_mask(pdev->dev, DMA_BIT_MASK(64))) {
+		dev_dbg(pdev->dev, "Enabling 64-bit DMA addresses.\n");
+		dma_set_coherent_mask(pdev->dev, DMA_BIT_MASK(64));
+	} else {
+		/*
+		 * This is to avoid error in cases where a 32-bit USB
+		 * controller is used on a 64-bit capable system.
+		 */
+		ret = dma_set_mask(pdev->dev, DMA_BIT_MASK(32));
+		if (ret)
+			return ret;
+
+		dev_dbg(pdev->dev, "Enabling 32-bit DMA addresses.\n");
+		dma_set_coherent_mask(pdev->dev, DMA_BIT_MASK(32));
+	}
+
+	spin_lock_init(&pdev->lock);
+
+	ret = cdnsp_mem_init(pdev);
+	if (ret)
+		return ret;
+
+	/*
+	 * Software workaround for U1: after transition
+	 * to U1 the controller starts gating clock, and in some cases,
+	 * it causes that controller stack.
+	 */
+	reg = readl(&pdev->port3x_regs->mode_2);
+	reg &= ~CFG_3XPORT_U1_PIPE_CLK_GATE_EN;
+	writel(reg, &pdev->port3x_regs->mode_2);
+
+	return 0;
+}
+
+static int __cdnsp_gadget_init(struct cdns *cdns)
+{
+	struct cdnsp_device *pdev;
+	u32 max_speed;
+	int ret = -ENOMEM;
+
+	cdns_drd_gadget_on(cdns);
+
+	pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
+	if (!pdev)
+		return -ENOMEM;
+
+	pm_runtime_get_sync(cdns->dev);
+
+	cdns->gadget_dev = pdev;
+	pdev->dev = cdns->dev;
+	pdev->regs = cdns->dev_regs;
+	max_speed = usb_get_maximum_speed(cdns->dev);
+
+	switch (max_speed) {
+	case USB_SPEED_FULL:
+	case USB_SPEED_HIGH:
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+		break;
+	default:
+		dev_err(cdns->dev, "invalid speed parameter %d\n", max_speed);
+		fallthrough;
+	case USB_SPEED_UNKNOWN:
+		/* Default to SSP */
+		max_speed = USB_SPEED_SUPER_PLUS;
+		break;
+	}
+
+	pdev->gadget.ops = &cdnsp_gadget_ops;
+	pdev->gadget.name = "cdnsp-gadget";
+	pdev->gadget.speed = USB_SPEED_UNKNOWN;
+	pdev->gadget.sg_supported = 1;
+	pdev->gadget.max_speed = max_speed;
+	pdev->gadget.lpm_capable = 1;
+
+	pdev->setup_buf = kzalloc(CDNSP_EP0_SETUP_SIZE, GFP_KERNEL);
+	if (!pdev->setup_buf)
+		goto free_pdev;
+
+	/*
+	 * Controller supports not aligned buffer but it should improve
+	 * performance.
+	 */
+	pdev->gadget.quirk_ep_out_aligned_size = true;
+
+	ret = cdnsp_gen_setup(pdev);
+	if (ret) {
+		dev_err(pdev->dev, "Generic initialization failed %d\n", ret);
+		goto free_setup;
+	}
+
+	ret = cdnsp_gadget_init_endpoints(pdev);
+	if (ret) {
+		dev_err(pdev->dev, "failed to initialize endpoints\n");
+		goto halt_pdev;
+	}
+
+	ret = usb_add_gadget_udc(pdev->dev, &pdev->gadget);
+	if (ret) {
+		dev_err(pdev->dev, "failed to register udc\n");
+		goto free_endpoints;
+	}
+
+	ret = devm_request_threaded_irq(pdev->dev, cdns->dev_irq,
+					cdnsp_irq_handler,
+					cdnsp_thread_irq_handler, IRQF_SHARED,
+					dev_name(pdev->dev), pdev);
+	if (ret)
+		goto del_gadget;
+
+	return 0;
+
+del_gadget:
+	usb_del_gadget_udc(&pdev->gadget);
+free_endpoints:
+	cdnsp_gadget_free_endpoints(pdev);
+halt_pdev:
+	cdnsp_halt(pdev);
+	cdnsp_reset(pdev);
+	cdnsp_mem_cleanup(pdev);
+free_setup:
+	kfree(pdev->setup_buf);
+free_pdev:
+	kfree(pdev);
+
+	return ret;
+}
+
+static void cdnsp_gadget_exit(struct cdns *cdns)
+{
+	struct cdnsp_device *pdev = cdns->gadget_dev;
+
+	devm_free_irq(pdev->dev, cdns->dev_irq, pdev);
+	pm_runtime_mark_last_busy(cdns->dev);
+	pm_runtime_put_autosuspend(cdns->dev);
+	usb_del_gadget_udc(&pdev->gadget);
+	cdnsp_gadget_free_endpoints(pdev);
+	cdnsp_mem_cleanup(pdev);
+	kfree(pdev);
+	cdns->gadget_dev = NULL;
+	cdns_drd_gadget_off(cdns);
+}
+
+static int cdnsp_gadget_suspend(struct cdns *cdns, bool do_wakeup)
+{
+	struct cdnsp_device *pdev = cdns->gadget_dev;
+	unsigned long flags;
+
+	if (pdev->link_state == XDEV_U3)
+		return 0;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+	cdnsp_disconnect_gadget(pdev);
+	cdnsp_stop(pdev);
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return 0;
+}
+
+static int cdnsp_gadget_resume(struct cdns *cdns, bool hibernated)
+{
+	struct cdnsp_device *pdev = cdns->gadget_dev;
+	enum usb_device_speed max_speed;
+	unsigned long flags;
+	int ret;
+
+	if (!pdev->gadget_driver)
+		return 0;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+	max_speed = pdev->gadget_driver->max_speed;
+
+	/* Limit speed if necessary. */
+	max_speed = min(max_speed, pdev->gadget.max_speed);
+
+	ret = cdnsp_run(pdev, max_speed);
+
+	if (pdev->link_state == XDEV_U3)
+		__cdnsp_gadget_wakeup(pdev);
+
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return ret;
+}
+
+/**
+ * cdnsp_gadget_init - initialize device structure
+ * @cdns: cdnsp instance
+ *
+ * This function initializes the gadget.
+ */
+int cdnsp_gadget_init(struct cdns *cdns)
+{
+	struct cdns_role_driver *rdrv;
+
+	rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
+	if (!rdrv)
+		return -ENOMEM;
+
+	rdrv->start	= __cdnsp_gadget_init;
+	rdrv->stop	= cdnsp_gadget_exit;
+	rdrv->suspend	= cdnsp_gadget_suspend;
+	rdrv->resume	= cdnsp_gadget_resume;
+	rdrv->state	= CDNS_ROLE_STATE_INACTIVE;
+	rdrv->name	= "gadget";
+	cdns->roles[USB_ROLE_DEVICE] = rdrv;
+
+	return 0;
+}
diff --git a/drivers/usb/cdns3/cdnsp-gadget.h b/drivers/usb/cdns3/cdnsp-gadget.h
new file mode 100644
index 000000000..f740fa608
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-gadget.h
@@ -0,0 +1,1602 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence CDNSP DRD Driver.
+ *
+ * Copyright (C) 2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ * Code based on Linux XHCI driver.
+ * Origin: Copyright (C) 2008 Intel Corp.
+ */
+#ifndef __LINUX_CDNSP_GADGET_H
+#define __LINUX_CDNSP_GADGET_H
+
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/usb/gadget.h>
+#include <linux/irq.h>
+
+/* Max number slots - only 1 is allowed. */
+#define CDNSP_DEV_MAX_SLOTS	1
+
+#define CDNSP_EP0_SETUP_SIZE	512
+
+/* One control and 15 for in and 15 for out endpoints. */
+#define CDNSP_ENDPOINTS_NUM	31
+
+/* Best Effort Service Latency. */
+#define CDNSP_DEFAULT_BESL	0
+
+/* Device Controller command default timeout value in us */
+#define CDNSP_CMD_TIMEOUT	(15 * 1000)
+
+/* Up to 16 ms to halt an device controller */
+#define CDNSP_MAX_HALT_USEC	(16 * 1000)
+
+#define CDNSP_CTX_SIZE	2112
+
+/*
+ * Controller register interface.
+ */
+
+/**
+ * struct cdnsp_cap_regs - CDNSP Registers.
+ * @hc_capbase:	Length of the capabilities register and controller
+ *              version number
+ * @hcs_params1: HCSPARAMS1 - Structural Parameters 1
+ * @hcs_params2: HCSPARAMS2 - Structural Parameters 2
+ * @hcs_params3: HCSPARAMS3 - Structural Parameters 3
+ * @hcc_params: HCCPARAMS - Capability Parameters
+ * @db_off: DBOFF - Doorbell array offset
+ * @run_regs_off: RTSOFF - Runtime register space offset
+ * @hcc_params2: HCCPARAMS2 Capability Parameters 2,
+ */
+struct cdnsp_cap_regs {
+	__le32 hc_capbase;
+	__le32 hcs_params1;
+	__le32 hcs_params2;
+	__le32 hcs_params3;
+	__le32 hcc_params;
+	__le32 db_off;
+	__le32 run_regs_off;
+	__le32 hcc_params2;
+	/* Reserved up to (CAPLENGTH - 0x1C) */
+};
+
+/* hc_capbase bitmasks. */
+/* bits 7:0 - how long is the Capabilities register. */
+#define HC_LENGTH(p)		(((p) >> 00) & GENMASK(7, 0))
+/* bits 31:16	*/
+#define HC_VERSION(p)		(((p) >> 16) & GENMASK(15, 1))
+
+/* HCSPARAMS1 - hcs_params1 - bitmasks */
+/* bits 0:7, Max Device Endpoints */
+#define HCS_ENDPOINTS_MASK	GENMASK(7, 0)
+#define HCS_ENDPOINTS(p)	(((p) & HCS_ENDPOINTS_MASK) >> 0)
+
+/* HCCPARAMS offset from PCI base address */
+#define HCC_PARAMS_OFFSET	0x10
+
+/* HCCPARAMS - hcc_params - bitmasks */
+/* 1: device controller can use 64-bit address pointers. */
+#define HCC_64BIT_ADDR(p)	((p) & BIT(0))
+/* 1: device controller uses 64-byte Device Context structures. */
+#define HCC_64BYTE_CONTEXT(p)	((p) & BIT(2))
+/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15. */
+#define HCC_MAX_PSA(p)		((((p) >> 12) & 0xf) + 1)
+/* Extended Capabilities pointer from PCI base. */
+#define HCC_EXT_CAPS(p)		(((p) & GENMASK(31, 16)) >> 16)
+
+#define CTX_SIZE(_hcc)		(HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
+
+/* db_off bitmask - bits 0:1 reserved. */
+#define DBOFF_MASK	GENMASK(31, 2)
+
+/* run_regs_off bitmask - bits 0:4 reserved. */
+#define RTSOFF_MASK	GENMASK(31, 5)
+
+/**
+ * struct cdnsp_op_regs - Device Controller Operational Registers.
+ * @command: USBCMD - Controller command register.
+ * @status: USBSTS - Controller status register.
+ * @page_size: This indicates the page size that the device controller supports.
+ *             If bit n is set, the controller supports a page size of 2^(n+12),
+ *             up to a 128MB page size. 4K is the minimum page size.
+ * @dnctrl: DNCTRL - Device notification control register.
+ * @cmd_ring: CRP - 64-bit Command Ring Pointer.
+ * @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer.
+ * @config_reg: CONFIG - Configure Register
+ * @port_reg_base: PORTSCn - base address for Port Status and Control
+ *                 Each port has a Port Status and Control register,
+ *                 followed by a Port Power Management Status and Control
+ *                 register, a Port Link Info register, and a reserved
+ *                 register.
+ */
+struct cdnsp_op_regs {
+	__le32 command;
+	__le32 status;
+	__le32 page_size;
+	__le32 reserved1;
+	__le32 reserved2;
+	__le32 dnctrl;
+	__le64 cmd_ring;
+	/* rsvd: offset 0x20-2F. */
+	__le32 reserved3[4];
+	__le64 dcbaa_ptr;
+	__le32 config_reg;
+	/* rsvd: offset 0x3C-3FF. */
+	__le32 reserved4[241];
+	/* port 1 registers, which serve as a base address for other ports. */
+	__le32 port_reg_base;
+};
+
+/* Number of registers per port. */
+#define NUM_PORT_REGS	4
+
+/**
+ * struct cdnsp_port_regs - Port Registers.
+ * @portsc: PORTSC - Port Status and Control Register.
+ * @portpmsc: PORTPMSC - Port Power Managements Status and Control Register.
+ * @portli: PORTLI - Port Link Info register.
+ */
+struct cdnsp_port_regs {
+	__le32 portsc;
+	__le32 portpmsc;
+	__le32 portli;
+	__le32 reserved;
+};
+
+/*
+ * These bits are Read Only (RO) and should be saved and written to the
+ * registers: 0 (connect status) and  10:13 (port speed).
+ * These bits are also sticky - meaning they're in the AUX well and they aren't
+ * changed by a hot and warm.
+ */
+#define CDNSP_PORT_RO	(PORT_CONNECT | DEV_SPEED_MASK)
+
+/*
+ * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
+ * bits 5:8 (link state), 25:26  ("wake on" enable state)
+ */
+#define CDNSP_PORT_RWS	(PORT_PLS_MASK | PORT_WKCONN_E | PORT_WKDISC_E)
+
+/*
+ * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
+ * bits 1 (port enable/disable), 17  ( connect changed),
+ * 21 (port reset changed) , 22 (Port Link State Change),
+ */
+#define CDNSP_PORT_RW1CS (PORT_PED | PORT_CSC | PORT_RC | PORT_PLC)
+
+/* USBCMD - USB command - bitmasks. */
+/* Run/Stop, controller execution - do not write unless controller is halted.*/
+#define CMD_R_S		BIT(0)
+/*
+ * Reset device controller - resets internal controller state machine and all
+ * registers (except PCI config regs).
+ */
+#define CMD_RESET	BIT(1)
+/* Event Interrupt Enable - a '1' allows interrupts from the controller. */
+#define CMD_INTE	BIT(2)
+/*
+ * Device System Error Interrupt Enable - get out-of-band signal for
+ * controller errors.
+ */
+#define CMD_DSEIE	BIT(3)
+/* device controller save/restore state. */
+#define CMD_CSS		BIT(8)
+#define CMD_CRS		BIT(9)
+/*
+ * Enable Wrap Event - '1' means device controller generates an event
+ * when MFINDEX wraps.
+ */
+#define CMD_EWE		BIT(10)
+/* 1: device enabled */
+#define CMD_DEVEN	BIT(17)
+/* bits 18:31 are reserved (and should be preserved on writes). */
+
+/* Command register values to disable interrupts. */
+#define CDNSP_IRQS	(CMD_INTE | CMD_DSEIE | CMD_EWE)
+
+/* USBSTS - USB status - bitmasks */
+/* controller not running - set to 1 when run/stop bit is cleared. */
+#define STS_HALT	BIT(0)
+/*
+ * serious error, e.g. PCI parity error. The controller will clear
+ * the run/stop bit.
+ */
+#define STS_FATAL	BIT(2)
+/* event interrupt - clear this prior to clearing any IP flags in IR set.*/
+#define STS_EINT	BIT(3)
+/* port change detect */
+#define STS_PCD		BIT(4)
+/* save state status - '1' means device controller is saving state. */
+#define STS_SSS		BIT(8)
+/* restore state status - '1' means controllers is restoring state. */
+#define STS_RSS		BIT(9)
+/* 1: save or restore error */
+#define STS_SRE		BIT(10)
+/* 1: device Not Ready to accept doorbell or op reg writes after reset. */
+#define STS_CNR		BIT(11)
+/* 1: internal Device Controller Error.*/
+#define STS_HCE		BIT(12)
+
+/* CRCR - Command Ring Control Register - cmd_ring bitmasks. */
+/* bit 0 is the command ring cycle state. */
+#define CMD_RING_CS		BIT(0)
+/* stop ring immediately - abort the currently executing command. */
+#define CMD_RING_ABORT		BIT(2)
+/*
+ * Command Ring Busy.
+ * Set when Doorbell register is written with DB for command and cleared when
+ * the controller reached end of CR.
+ */
+#define CMD_RING_BUSY(p)	((p) & BIT(4))
+/* 1: command ring is running */
+#define CMD_RING_RUNNING	BIT(3)
+/* Command Ring pointer - bit mask for the lower 32 bits. */
+#define CMD_RING_RSVD_BITS	GENMASK(5, 0)
+
+/* CONFIG - Configure Register - config_reg bitmasks. */
+/* bits 0:7 - maximum number of device slots enabled. */
+#define MAX_DEVS		GENMASK(7, 0)
+/* bit 8: U3 Entry Enabled, assert PLC when controller enters U3. */
+#define CONFIG_U3E		BIT(8)
+
+/* PORTSC - Port Status and Control Register - port_reg_base bitmasks */
+/* 1: device connected. */
+#define PORT_CONNECT		BIT(0)
+/* 1: port enabled. */
+#define PORT_PED		BIT(1)
+/* 1: port reset signaling asserted. */
+#define PORT_RESET		BIT(4)
+/*
+ * Port Link State - bits 5:8
+ * A read gives the current link PM state of the port,
+ * a write with Link State Write Strobe sets the link state.
+ */
+#define PORT_PLS_MASK		GENMASK(8, 5)
+#define XDEV_U0			(0x0 << 5)
+#define XDEV_U1			(0x1 << 5)
+#define XDEV_U2			(0x2 << 5)
+#define XDEV_U3			(0x3 << 5)
+#define XDEV_DISABLED		(0x4 << 5)
+#define XDEV_RXDETECT		(0x5 << 5)
+#define XDEV_INACTIVE		(0x6 << 5)
+#define XDEV_POLLING		(0x7 << 5)
+#define XDEV_RECOVERY		(0x8 << 5)
+#define XDEV_HOT_RESET		(0x9 << 5)
+#define XDEV_COMP_MODE		(0xa << 5)
+#define XDEV_TEST_MODE		(0xb << 5)
+#define XDEV_RESUME		(0xf << 5)
+/* 1: port has power. */
+#define PORT_POWER		BIT(9)
+/*
+ * bits 10:13 indicate device speed:
+ * 0 - undefined speed - port hasn't be initialized by a reset yet
+ * 1 - full speed
+ * 2 - Reserved (Low Speed not supported
+ * 3 - high speed
+ * 4 - super speed
+ * 5 - super speed
+ * 6-15 reserved
+ */
+#define DEV_SPEED_MASK		GENMASK(13, 10)
+#define XDEV_FS			(0x1 << 10)
+#define XDEV_HS			(0x3 << 10)
+#define XDEV_SS			(0x4 << 10)
+#define XDEV_SSP		(0x5 << 10)
+#define DEV_UNDEFSPEED(p)	(((p) & DEV_SPEED_MASK) == (0x0 << 10))
+#define DEV_FULLSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_FS)
+#define DEV_HIGHSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_HS)
+#define DEV_SUPERSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_SS)
+#define DEV_SUPERSPEEDPLUS(p)	(((p) & DEV_SPEED_MASK) == XDEV_SSP)
+#define DEV_SUPERSPEED_ANY(p)	(((p) & DEV_SPEED_MASK) >= XDEV_SS)
+#define DEV_PORT_SPEED(p)	(((p) >> 10) & 0x0f)
+/* Port Link State Write Strobe - set this when changing link state */
+#define PORT_LINK_STROBE	BIT(16)
+/* 1: connect status change */
+#define PORT_CSC		BIT(17)
+/* 1: warm reset for a USB 3.0 device is done. */
+#define PORT_WRC		BIT(19)
+/* 1: reset change - 1 to 0 transition of PORT_RESET */
+#define PORT_RC			BIT(21)
+/*
+ * port link status change - set on some port link state transitions:
+ * Transition			Reason
+ * ----------------------------------------------------------------------------
+ * - U3 to Resume		Wakeup signaling from a device
+ * - Resume to Recovery to U0	USB 3.0 device resume
+ * - Resume to U0		USB 2.0 device resume
+ * - U3 to Recovery to U0	Software resume of USB 3.0 device complete
+ * - U3 to U0			Software resume of USB 2.0 device complete
+ * - U2 to U0			L1 resume of USB 2.1 device complete
+ * - U0 to U0			L1 entry rejection by USB 2.1 device
+ * - U0 to disabled		L1 entry error with USB 2.1 device
+ * - Any state to inactive	Error on USB 3.0 port
+ */
+#define PORT_PLC		BIT(22)
+/* Port configure error change - port failed to configure its link partner. */
+#define PORT_CEC		BIT(23)
+/* Wake on connect (enable). */
+#define PORT_WKCONN_E		BIT(25)
+/* Wake on disconnect (enable). */
+#define PORT_WKDISC_E		BIT(26)
+/* Indicates if Warm Reset is being received. */
+#define PORT_WR			BIT(31)
+
+#define PORT_CHANGE_BITS (PORT_CSC | PORT_WRC | PORT_RC | PORT_PLC | PORT_CEC)
+
+/* PORTPMSCUSB3 - Port Power Management Status and Control - bitmasks. */
+/*  Enables U1 entry. */
+#define PORT_U1_TIMEOUT_MASK	GENMASK(7, 0)
+#define PORT_U1_TIMEOUT(p)	((p) & PORT_U1_TIMEOUT_MASK)
+/* Enables U2 entry .*/
+#define PORT_U2_TIMEOUT_MASK	GENMASK(14, 8)
+#define PORT_U2_TIMEOUT(p)	(((p) << 8) & PORT_U2_TIMEOUT_MASK)
+
+/* PORTPMSCUSB2 - Port Power Management Status and Control - bitmasks. */
+#define PORT_L1S_MASK		GENMASK(2, 0)
+#define PORT_L1S(p)		((p) & PORT_L1S_MASK)
+#define PORT_L1S_ACK		PORT_L1S(1)
+#define PORT_L1S_NYET		PORT_L1S(2)
+#define PORT_L1S_STALL		PORT_L1S(3)
+#define PORT_L1S_TIMEOUT	PORT_L1S(4)
+/* Remote Wake Enable. */
+#define PORT_RWE		BIT(3)
+/* Best Effort Service Latency (BESL). */
+#define PORT_BESL(p)		(((p) << 4) & GENMASK(7, 4))
+/* Hardware LPM Enable (HLE). */
+#define PORT_HLE		BIT(16)
+/* Received Best Effort Service Latency (BESL). */
+#define PORT_RRBESL(p)		(((p) & GENMASK(20, 17)) >> 17)
+/* Port Test Control. */
+#define PORT_TEST_MODE_MASK	GENMASK(31, 28)
+#define PORT_TEST_MODE(p)	(((p) << 28) & PORT_TEST_MODE_MASK)
+
+/**
+ * struct cdnsp_intr_reg - Interrupt Register Set.
+ * @irq_pending: IMAN - Interrupt Management Register. Used to enable
+ *               interrupts and check for pending interrupts.
+ * @irq_control: IMOD - Interrupt Moderation Register.
+ *               Used to throttle interrupts.
+ * @erst_size: Number of segments in the Event Ring Segment Table (ERST).
+ * @erst_base: ERST base address.
+ * @erst_dequeue: Event ring dequeue pointer.
+ *
+ * Each interrupter (defined by a MSI-X vector) has an event ring and an Event
+ * Ring Segment Table (ERST) associated with it. The event ring is comprised of
+ * multiple segments of the same size. The controller places events on the ring
+ * and "updates the Cycle bit in the TRBs to indicate to software the current
+ * position of the Enqueue Pointer." The driver processes those events and
+ * updates the dequeue pointer.
+ */
+struct cdnsp_intr_reg {
+	__le32 irq_pending;
+	__le32 irq_control;
+	__le32 erst_size;
+	__le32 rsvd;
+	__le64 erst_base;
+	__le64 erst_dequeue;
+};
+
+/* IMAN - Interrupt Management Register - irq_pending bitmasks l. */
+#define IMAN_IE			BIT(1)
+#define IMAN_IP			BIT(0)
+/* bits 2:31 need to be preserved */
+#define IMAN_IE_SET(p)		((p) | IMAN_IE)
+#define IMAN_IE_CLEAR(p)	((p) & ~IMAN_IE)
+
+/* IMOD - Interrupter Moderation Register - irq_control bitmasks. */
+/*
+ * Minimum interval between interrupts (in 250ns intervals). The interval
+ * between interrupts will be longer if there are no events on the event ring.
+ * Default is 4000 (1 ms).
+ */
+#define IMOD_INTERVAL_MASK	GENMASK(15, 0)
+/* Counter used to count down the time to the next interrupt - HW use only */
+#define IMOD_COUNTER_MASK	GENMASK(31, 16)
+#define IMOD_DEFAULT_INTERVAL	0
+
+/* erst_size bitmasks. */
+/* Preserve bits 16:31 of erst_size. */
+#define ERST_SIZE_MASK		GENMASK(31, 16)
+
+/* erst_dequeue bitmasks. */
+/*
+ * Dequeue ERST Segment Index (DESI) - Segment number (or alias)
+ * where the current dequeue pointer lies. This is an optional HW hint.
+ */
+#define ERST_DESI_MASK		GENMASK(2, 0)
+/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced. */
+#define ERST_EHB		BIT(3)
+#define ERST_PTR_MASK		GENMASK(3, 0)
+
+/**
+ * struct cdnsp_run_regs
+ * @microframe_index: MFINDEX - current microframe number.
+ * @ir_set: Array of Interrupter registers.
+ *
+ * Device Controller Runtime Registers:
+ * "Software should read and write these registers using only Dword (32 bit)
+ * or larger accesses"
+ */
+struct cdnsp_run_regs {
+	__le32 microframe_index;
+	__le32 rsvd[7];
+	struct cdnsp_intr_reg ir_set[128];
+};
+
+/**
+ * USB2.0 Port Peripheral Configuration Registers.
+ * @ext_cap: Header register for Extended Capability.
+ * @port_reg1: Timer Configuration Register.
+ * @port_reg2: Timer Configuration Register.
+ * @port_reg3: Timer Configuration Register.
+ * @port_reg4: Timer Configuration Register.
+ * @port_reg5: Timer Configuration Register.
+ * @port_reg6: Chicken bits for USB20PPP.
+ */
+struct cdnsp_20port_cap {
+	__le32 ext_cap;
+	__le32 port_reg1;
+	__le32 port_reg2;
+	__le32 port_reg3;
+	__le32 port_reg4;
+	__le32 port_reg5;
+	__le32 port_reg6;
+};
+
+/* Extended capability register fields */
+#define EXT_CAPS_ID(p)			(((p) >> 0) & GENMASK(7, 0))
+#define EXT_CAPS_NEXT(p)		(((p) >> 8) & GENMASK(7, 0))
+/* Extended capability IDs - ID 0 reserved */
+#define EXT_CAPS_PROTOCOL		2
+
+/* USB 2.0 Port Peripheral Configuration Extended Capability */
+#define EXT_CAP_CFG_DEV_20PORT_CAP_ID	0xC1
+/*
+ * Setting this bit to '1' enables automatic wakeup from L1 state on transfer
+ * TRB prepared when USBSSP operates in USB2.0 mode.
+ */
+#define PORT_REG6_L1_L0_HW_EN		BIT(1)
+/*
+ * Setting this bit to '1' forces Full Speed when USBSSP operates in USB2.0
+ * mode (disables High Speed).
+ */
+#define PORT_REG6_FORCE_FS		BIT(0)
+
+/**
+ * USB3.x Port Peripheral Configuration Registers.
+ * @ext_cap: Header register for Extended Capability.
+ * @mode_addr: Miscellaneous 3xPORT operation mode configuration register.
+ * @mode_2: 3x Port Control Register 2.
+ */
+struct cdnsp_3xport_cap {
+	__le32 ext_cap;
+	__le32 mode_addr;
+	__le32 reserved[52];
+	__le32 mode_2;
+};
+
+/* Extended Capability Header for 3XPort Configuration Registers. */
+#define D_XEC_CFG_3XPORT_CAP		0xC0
+#define CFG_3XPORT_SSP_SUPPORT		BIT(31)
+#define CFG_3XPORT_U1_PIPE_CLK_GATE_EN	BIT(0)
+
+/* Revision Extended Capability ID */
+#define RTL_REV_CAP			0xC4
+#define RTL_REV_CAP_RX_BUFF_CMD_SIZE	BITMASK(31, 24)
+#define RTL_REV_CAP_RX_BUFF_SIZE	BITMASK(15, 0)
+#define RTL_REV_CAP_TX_BUFF_CMD_SIZE	BITMASK(31, 24)
+#define RTL_REV_CAP_TX_BUFF_SIZE	BITMASK(15, 0)
+
+#define CDNSP_VER_1 0x00000000
+#define CDNSP_VER_2 0x10000000
+
+#define CDNSP_IF_EP_EXIST(pdev, ep_num, dir) \
+			 (readl(&(pdev)->rev_cap->ep_supported) & \
+			 (BIT(ep_num) << ((dir) ? 0 : 16)))
+
+/**
+ * struct cdnsp_rev_cap - controller capabilities.
+ * @ext_cap: Header for RTL Revision Extended Capability.
+ * @rtl_revision: RTL revision.
+ * @rx_buff_size: Rx buffer sizes.
+ * @tx_buff_size: Tx buffer sizes.
+ * @ep_supported: Supported endpoints.
+ * @ctrl_revision: Controller revision ID.
+ */
+struct cdnsp_rev_cap {
+	__le32 ext_cap;
+	__le32 rtl_revision;
+	__le32 rx_buff_size;
+	__le32 tx_buff_size;
+	__le32 ep_supported;
+	__le32 ctrl_revision;
+};
+
+/* USB2.0 Port Peripheral Configuration Registers. */
+#define D_XEC_PRE_REGS_CAP		0xC8
+#define REG_CHICKEN_BITS_2_OFFSET	0x48
+#define CHICKEN_XDMA_2_TP_CACHE_DIS	BIT(28)
+
+/* XBUF Extended Capability ID. */
+#define XBUF_CAP_ID			0xCB
+#define XBUF_RX_TAG_MASK_0_OFFSET	0x1C
+#define XBUF_RX_TAG_MASK_1_OFFSET	0x24
+#define XBUF_TX_CMD_OFFSET		0x2C
+
+/**
+ * struct cdnsp_doorbell_array.
+ * @cmd_db: Command ring doorbell register.
+ * @ep_db: Endpoint ring doorbell register.
+ *         Bits 0 - 7: Endpoint target.
+ *         Bits 8 - 15: RsvdZ.
+ *         Bits 16 - 31: Stream ID.
+ */
+struct cdnsp_doorbell_array {
+	__le32 cmd_db;
+	__le32 ep_db;
+};
+
+#define DB_VALUE(ep, stream)		((((ep) + 1) & 0xff) | ((stream) << 16))
+#define DB_VALUE_EP0_OUT(ep, stream)	((ep) & 0xff)
+#define DB_VALUE_CMD			0x00000000
+
+/**
+ * struct cdnsp_container_ctx.
+ * @type: Type of context. Used to calculated offsets to contained contexts.
+ * @size: Size of the context data.
+ * @ctx_size: context data structure size - 64 or 32 bits.
+ * @dma: dma address of the bytes.
+ * @bytes: The raw context data given to HW.
+ *
+ * Represents either a Device or Input context. Holds a pointer to the raw
+ * memory used for the context (bytes) and dma address of it (dma).
+ */
+struct cdnsp_container_ctx {
+	unsigned int type;
+#define CDNSP_CTX_TYPE_DEVICE	0x1
+#define CDNSP_CTX_TYPE_INPUT	0x2
+	int size;
+	int ctx_size;
+	dma_addr_t dma;
+	u8 *bytes;
+};
+
+/**
+ * struct cdnsp_slot_ctx
+ * @dev_info: Device speed, and last valid endpoint.
+ * @dev_port: Device port number that is needed to access the USB device.
+ * @int_target: Interrupter target number.
+ * @dev_state: Slot state and device address.
+ *
+ * Slot Context - This assumes the controller uses 32-byte context
+ * structures. If the controller uses 64-byte contexts, there is an additional
+ * 32 bytes reserved at the end of the slot context for controller internal use.
+ */
+struct cdnsp_slot_ctx {
+	__le32 dev_info;
+	__le32 dev_port;
+	__le32 int_target;
+	__le32 dev_state;
+	/* offset 0x10 to 0x1f reserved for controller internal use. */
+	__le32 reserved[4];
+};
+
+/* Bits 20:23 in the Slot Context are the speed for the device. */
+#define SLOT_SPEED_FS		(XDEV_FS << 10)
+#define SLOT_SPEED_HS		(XDEV_HS << 10)
+#define SLOT_SPEED_SS		(XDEV_SS << 10)
+#define SLOT_SPEED_SSP		(XDEV_SSP << 10)
+
+/* dev_info bitmasks. */
+/* Device speed - values defined by PORTSC Device Speed field - 20:23. */
+#define DEV_SPEED		GENMASK(23, 20)
+#define GET_DEV_SPEED(n)	(((n) & DEV_SPEED) >> 20)
+/* Index of the last valid endpoint context in this device context - 27:31. */
+#define LAST_CTX_MASK		((unsigned int)GENMASK(31, 27))
+#define LAST_CTX(p)		((p) << 27)
+#define LAST_CTX_TO_EP_NUM(p)	(((p) >> 27) - 1)
+#define SLOT_FLAG		BIT(0)
+#define EP0_FLAG		BIT(1)
+
+/* dev_port bitmasks */
+/* Device port number that is needed to access the USB device. */
+#define DEV_PORT(p)		(((p) & 0xff) << 16)
+
+/* dev_state bitmasks */
+/* USB device address - assigned by the controller. */
+#define DEV_ADDR_MASK		GENMASK(7, 0)
+/* Slot state */
+#define SLOT_STATE		GENMASK(31, 27)
+#define GET_SLOT_STATE(p)	(((p) & SLOT_STATE) >> 27)
+
+#define SLOT_STATE_DISABLED	0
+#define SLOT_STATE_ENABLED	SLOT_STATE_DISABLED
+#define SLOT_STATE_DEFAULT	1
+#define SLOT_STATE_ADDRESSED	2
+#define SLOT_STATE_CONFIGURED	3
+
+/**
+ * struct cdnsp_ep_ctx.
+ * @ep_info: Endpoint state, streams, mult, and interval information.
+ * @ep_info2: Information on endpoint type, max packet size, max burst size,
+ *            error count, and whether the controller will force an event for
+ *            all transactions.
+ * @deq: 64-bit ring dequeue pointer address. If the endpoint only
+ *       defines one stream, this points to the endpoint transfer ring.
+ *       Otherwise, it points to a stream context array, which has a
+ *       ring pointer for each flow.
+ * @tx_info: Average TRB lengths for the endpoint ring and
+ *	     max payload within an Endpoint Service Interval Time (ESIT).
+ *
+ * Endpoint Context - This assumes the controller uses 32-byte context
+ * structures. If the controller uses 64-byte contexts, there is an additional
+ * 32 bytes reserved at the end of the endpoint context for controller internal
+ * use.
+ */
+struct cdnsp_ep_ctx {
+	__le32 ep_info;
+	__le32 ep_info2;
+	__le64 deq;
+	__le32 tx_info;
+	/* offset 0x14 - 0x1f reserved for controller internal use. */
+	__le32 reserved[3];
+};
+
+/* ep_info bitmasks. */
+/*
+ * Endpoint State - bits 0:2:
+ * 0 - disabled
+ * 1 - running
+ * 2 - halted due to halt condition
+ * 3 - stopped
+ * 4 - TRB error
+ * 5-7 - reserved
+ */
+#define EP_STATE_MASK		GENMASK(3, 0)
+#define EP_STATE_DISABLED	0
+#define EP_STATE_RUNNING	1
+#define EP_STATE_HALTED		2
+#define EP_STATE_STOPPED	3
+#define EP_STATE_ERROR		4
+#define GET_EP_CTX_STATE(ctx)	(le32_to_cpu((ctx)->ep_info) & EP_STATE_MASK)
+
+/* Mult - Max number of burst within an interval, in EP companion desc. */
+#define EP_MULT(p)			(((p) << 8) & GENMASK(9, 8))
+#define CTX_TO_EP_MULT(p)		(((p) & GENMASK(9, 8)) >> 8)
+/* bits 10:14 are Max Primary Streams. */
+/* bit 15 is Linear Stream Array. */
+/* Interval - period between requests to an endpoint - 125u increments. */
+#define EP_INTERVAL(p)			(((p) << 16) & GENMASK(23, 16))
+#define EP_INTERVAL_TO_UFRAMES(p)	(1 << (((p) & GENMASK(23, 16)) >> 16))
+#define CTX_TO_EP_INTERVAL(p)		(((p) & GENMASK(23, 16)) >> 16)
+#define EP_MAXPSTREAMS_MASK		GENMASK(14, 10)
+#define EP_MAXPSTREAMS(p)		(((p) << 10) & EP_MAXPSTREAMS_MASK)
+#define CTX_TO_EP_MAXPSTREAMS(p)	(((p) & EP_MAXPSTREAMS_MASK) >> 10)
+/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
+#define EP_HAS_LSA			BIT(15)
+
+/* ep_info2 bitmasks */
+#define ERROR_COUNT(p)		(((p) & 0x3) << 1)
+#define CTX_TO_EP_TYPE(p)	(((p) >> 3) & 0x7)
+#define EP_TYPE(p)		((p) << 3)
+#define ISOC_OUT_EP		1
+#define BULK_OUT_EP		2
+#define INT_OUT_EP		3
+#define CTRL_EP			4
+#define ISOC_IN_EP		5
+#define BULK_IN_EP		6
+#define INT_IN_EP		7
+/* bit 6 reserved. */
+/* bit 7 is Device Initiate Disable - for disabling stream selection. */
+#define MAX_BURST(p)		(((p) << 8) & GENMASK(15, 8))
+#define CTX_TO_MAX_BURST(p)	(((p) & GENMASK(15, 8)) >> 8)
+#define MAX_PACKET(p)		(((p) << 16) & GENMASK(31, 16))
+#define MAX_PACKET_MASK		GENMASK(31, 16)
+#define MAX_PACKET_DECODED(p)	(((p) & GENMASK(31, 16)) >> 16)
+
+/* tx_info bitmasks. */
+#define EP_AVG_TRB_LENGTH(p)		((p) & GENMASK(15, 0))
+#define EP_MAX_ESIT_PAYLOAD_LO(p)	(((p) << 16) & GENMASK(31, 16))
+#define EP_MAX_ESIT_PAYLOAD_HI(p)	((((p) & GENMASK(23, 16)) >> 16) << 24)
+#define CTX_TO_MAX_ESIT_PAYLOAD_LO(p)	(((p) & GENMASK(31, 16)) >> 16)
+#define CTX_TO_MAX_ESIT_PAYLOAD_HI(p)	(((p) & GENMASK(31, 24)) >> 24)
+
+/* deq bitmasks. */
+#define EP_CTX_CYCLE_MASK		BIT(0)
+#define CTX_DEQ_MASK			(~0xfL)
+
+/**
+ * struct cdnsp_input_control_context
+ * Input control context;
+ *
+ * @drop_context: Set the bit of the endpoint context you want to disable.
+ * @add_context: Set the bit of the endpoint context you want to enable.
+ */
+struct cdnsp_input_control_ctx {
+	__le32 drop_flags;
+	__le32 add_flags;
+	__le32 rsvd2[6];
+};
+
+/**
+ * Represents everything that is needed to issue a command on the command ring.
+ *
+ * @in_ctx: Pointer to input context structure.
+ * @status: Command Completion Code for last command.
+ * @command_trb: Pointer to command TRB.
+ */
+struct cdnsp_command {
+	/* Input context for changing device state. */
+	struct cdnsp_container_ctx *in_ctx;
+	u32 status;
+	union cdnsp_trb *command_trb;
+};
+
+/**
+ * Stream context structure.
+ *
+ * @stream_ring: 64-bit stream ring address, cycle state, and stream type.
+ * @reserved: offset 0x14 - 0x1f reserved for controller internal use.
+ */
+struct cdnsp_stream_ctx {
+	__le64 stream_ring;
+	__le32 reserved[2];
+};
+
+/* Stream Context Types - bits 3:1 of stream ctx deq ptr. */
+#define SCT_FOR_CTX(p)		(((p) << 1) & GENMASK(3, 1))
+/* Secondary stream array type, dequeue pointer is to a transfer ring. */
+#define SCT_SEC_TR		0
+/* Primary stream array type, dequeue pointer is to a transfer ring. */
+#define SCT_PRI_TR		1
+
+/**
+ *  struct cdnsp_stream_info: Representing everything that is needed to
+ *                            supports stream capable endpoints.
+ *  @stream_rings: Array of pointers containing Transfer rings for all
+ *                 supported streams.
+ *  @num_streams: Number of streams, including stream 0.
+ *  @stream_ctx_array: The stream context array may be bigger than the number
+ *                     of streams the driver asked for.
+ *  @num_stream_ctxs: Number of streams.
+ *  @ctx_array_dma: Dma address of Context Stream Array.
+ *  @trb_address_map: For mapping physical TRB addresses to segments in
+ *                    stream rings.
+ *  @td_count: Number of TDs associated with endpoint.
+ *  @first_prime_det: First PRIME packet detected.
+ *  @drbls_count: Number of allowed doorbells.
+ */
+struct cdnsp_stream_info {
+	struct cdnsp_ring **stream_rings;
+	unsigned int num_streams;
+	struct cdnsp_stream_ctx *stream_ctx_array;
+	unsigned int num_stream_ctxs;
+	dma_addr_t ctx_array_dma;
+	struct radix_tree_root trb_address_map;
+	int td_count;
+	u8 first_prime_det;
+#define STREAM_DRBL_FIFO_DEPTH 2
+	u8 drbls_count;
+};
+
+#define STREAM_LOG_STREAMS 4
+#define STREAM_NUM_STREAMS BIT(STREAM_LOG_STREAMS)
+
+#if STREAM_LOG_STREAMS > 16 && STREAM_LOG_STREAMS < 1
+#error "Not suupported stream value"
+#endif
+
+/**
+ * struct cdnsp_ep - extended device side representation of USB endpoint.
+ * @endpoint: usb endpoint
+ * @pending_req_list: List of requests queuing on transfer ring.
+ * @pdev: Device associated with this endpoint.
+ * @number: Endpoint number (1 - 15).
+ * idx: The device context index (DCI).
+ * interval: Interval between packets used for ISOC endpoint.
+ * @name: A human readable name e.g. ep1out.
+ * @direction: Endpoint direction.
+ * @buffering: Number of on-chip buffers related to endpoint.
+ * @buffering_period; Number of on-chip buffers related to periodic endpoint.
+ * @in_ctx: Pointer to input endpoint context structure.
+ * @out_ctx: Pointer to output endpoint context structure.
+ * @ring: Pointer to transfer ring.
+ * @stream_info: Hold stream information.
+ * @ep_state: Current state of endpoint.
+ * @skip: Sometimes the controller can not process isochronous endpoint ring
+ *        quickly enough, and it will miss some isoc tds on the ring and
+ *        generate Missed Service Error Event.
+ *        Set skip flag when receive a Missed Service Error Event and
+ *        process the missed tds on the endpoint ring.
+ */
+struct cdnsp_ep {
+	struct usb_ep endpoint;
+	struct list_head pending_list;
+	struct cdnsp_device *pdev;
+	u8 number;
+	u8 idx;
+	u32 interval;
+	char name[20];
+	u8 direction;
+	u8 buffering;
+	u8 buffering_period;
+	struct cdnsp_ep_ctx *in_ctx;
+	struct cdnsp_ep_ctx *out_ctx;
+	struct cdnsp_ring *ring;
+	struct cdnsp_stream_info stream_info;
+	unsigned int ep_state;
+#define EP_ENABLED		BIT(0)
+#define EP_DIS_IN_RROGRESS	BIT(1)
+#define EP_HALTED		BIT(2)
+#define EP_STOPPED		BIT(3)
+#define EP_WEDGE		BIT(4)
+#define EP0_HALTED_STATUS	BIT(5)
+#define EP_HAS_STREAMS		BIT(6)
+#define EP_UNCONFIGURED		BIT(7)
+
+	bool skip;
+};
+
+/**
+ * struct cdnsp_device_context_array
+ * @dev_context_ptr: Array of 64-bit DMA addresses for device contexts.
+ * @dma: DMA address for device contexts structure.
+ */
+struct cdnsp_device_context_array {
+	__le64 dev_context_ptrs[CDNSP_DEV_MAX_SLOTS + 1];
+	dma_addr_t dma;
+};
+
+/**
+ * struct cdnsp_transfer_event.
+ * @buffer: 64-bit buffer address, or immediate data.
+ * @transfer_len: Data length transferred.
+ * @flags: Field is interpreted differently based on the type of TRB.
+ */
+struct cdnsp_transfer_event {
+	__le64 buffer;
+	__le32 transfer_len;
+	__le32 flags;
+};
+
+/* Invalidate event after disabling endpoint. */
+#define TRB_EVENT_INVALIDATE 8
+
+/* Transfer event TRB length bit mask. */
+/* bits 0:23 */
+#define EVENT_TRB_LEN(p)			((p) & GENMASK(23, 0))
+/* Completion Code - only applicable for some types of TRBs */
+#define COMP_CODE_MASK				(0xff << 24)
+#define GET_COMP_CODE(p)			(((p) & COMP_CODE_MASK) >> 24)
+#define COMP_INVALID				0
+#define COMP_SUCCESS				1
+#define COMP_DATA_BUFFER_ERROR			2
+#define COMP_BABBLE_DETECTED_ERROR		3
+#define COMP_TRB_ERROR				5
+#define COMP_RESOURCE_ERROR			7
+#define COMP_NO_SLOTS_AVAILABLE_ERROR		9
+#define COMP_INVALID_STREAM_TYPE_ERROR		10
+#define COMP_SLOT_NOT_ENABLED_ERROR		11
+#define COMP_ENDPOINT_NOT_ENABLED_ERROR		12
+#define COMP_SHORT_PACKET			13
+#define COMP_RING_UNDERRUN			14
+#define COMP_RING_OVERRUN			15
+#define COMP_VF_EVENT_RING_FULL_ERROR		16
+#define COMP_PARAMETER_ERROR			17
+#define COMP_CONTEXT_STATE_ERROR		19
+#define COMP_EVENT_RING_FULL_ERROR		21
+#define COMP_INCOMPATIBLE_DEVICE_ERROR		22
+#define COMP_MISSED_SERVICE_ERROR		23
+#define COMP_COMMAND_RING_STOPPED		24
+#define COMP_COMMAND_ABORTED			25
+#define COMP_STOPPED				26
+#define COMP_STOPPED_LENGTH_INVALID		27
+#define COMP_STOPPED_SHORT_PACKET		28
+#define COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR	29
+#define COMP_ISOCH_BUFFER_OVERRUN		31
+#define COMP_EVENT_LOST_ERROR			32
+#define COMP_UNDEFINED_ERROR			33
+#define COMP_INVALID_STREAM_ID_ERROR		34
+
+/*Transfer Event NRDY bit fields */
+#define TRB_TO_DEV_STREAM(p)			((p) & GENMASK(16, 0))
+#define TRB_TO_HOST_STREAM(p)			((p) & GENMASK(16, 0))
+#define STREAM_PRIME_ACK			0xFFFE
+#define STREAM_REJECTED				0xFFFF
+
+/** Transfer Event bit fields **/
+#define TRB_TO_EP_ID(p)				(((p) & GENMASK(20, 16)) >> 16)
+
+/**
+ * struct cdnsp_link_trb
+ * @segment_ptr: 64-bit segment pointer.
+ * @intr_target: Interrupter target.
+ * @control: Flags.
+ */
+struct cdnsp_link_trb {
+	__le64 segment_ptr;
+	__le32 intr_target;
+	__le32 control;
+};
+
+/* control bitfields */
+#define LINK_TOGGLE	BIT(1)
+
+/**
+ * struct cdnsp_event_cmd - Command completion event TRB.
+ * cmd_trb: Pointer to command TRB, or the value passed by the event data trb
+ * status: Command completion parameters and error code.
+ * flags: Flags.
+ */
+struct cdnsp_event_cmd {
+	__le64 cmd_trb;
+	__le32 status;
+	__le32 flags;
+};
+
+/* flags bitmasks */
+
+/* Address device - disable SetAddress. */
+#define TRB_BSR		BIT(9)
+
+/* Configure Endpoint - Deconfigure. */
+#define TRB_DC		BIT(9)
+
+/* Force Header */
+#define TRB_FH_TO_PACKET_TYPE(p)	((p) & GENMASK(4, 0))
+#define TRB_FH_TR_PACKET		0x4
+#define TRB_FH_TO_DEVICE_ADDRESS(p)	(((p) << 25) & GENMASK(31, 25))
+#define TRB_FH_TR_PACKET_DEV_NOT	0x6
+#define TRB_FH_TO_NOT_TYPE(p)		(((p) << 4) & GENMASK(7, 4))
+#define TRB_FH_TR_PACKET_FUNCTION_WAKE	0x1
+#define TRB_FH_TO_INTERFACE(p)		(((p) << 8) & GENMASK(15, 8))
+
+enum cdnsp_setup_dev {
+	SETUP_CONTEXT_ONLY,
+	SETUP_CONTEXT_ADDRESS,
+};
+
+/* bits 24:31 are the slot ID. */
+#define TRB_TO_SLOT_ID(p)		(((p) & GENMASK(31, 24)) >> 24)
+#define SLOT_ID_FOR_TRB(p)		(((p) << 24) & GENMASK(31, 24))
+
+/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB. */
+#define TRB_TO_EP_INDEX(p)		(((p) >> 16) & 0x1f)
+
+#define EP_ID_FOR_TRB(p)		((((p) + 1) << 16) & GENMASK(20, 16))
+
+#define SUSPEND_PORT_FOR_TRB(p)		(((p) & 1) << 23)
+#define TRB_TO_SUSPEND_PORT(p)		(((p) >> 23) & 0x1)
+#define LAST_EP_INDEX			30
+
+/* Set TR Dequeue Pointer command TRB fields. */
+#define TRB_TO_STREAM_ID(p)		((((p) & GENMASK(31, 16)) >> 16))
+#define STREAM_ID_FOR_TRB(p)		((((p)) << 16) & GENMASK(31, 16))
+#define SCT_FOR_TRB(p)			(((p) << 1) & 0x7)
+
+/* Link TRB specific fields. */
+#define TRB_TC				BIT(1)
+
+/* Port Status Change Event TRB fields. */
+/* Port ID - bits 31:24. */
+#define GET_PORT_ID(p)			(((p) & GENMASK(31, 24)) >> 24)
+#define SET_PORT_ID(p)			(((p) << 24) & GENMASK(31, 24))
+#define EVENT_DATA			BIT(2)
+
+/* Normal TRB fields. */
+/* transfer_len bitmasks - bits 0:16. */
+#define TRB_LEN(p)			((p) & GENMASK(16, 0))
+/* TD Size, packets remaining in this TD, bits 21:17 (5 bits, so max 31). */
+#define TRB_TD_SIZE(p)			(min((p), (u32)31) << 17)
+#define GET_TD_SIZE(p)			(((p) & GENMASK(21, 17)) >> 17)
+/*
+ * Controller uses the TD_SIZE field for TBC if Extended TBC
+ * is enabled (ETE).
+ */
+#define TRB_TD_SIZE_TBC(p)		(min((p), (u32)31) << 17)
+/* Interrupter Target - which MSI-X vector to target the completion event at. */
+#define TRB_INTR_TARGET(p)		(((p) << 22) & GENMASK(31, 22))
+#define GET_INTR_TARGET(p)		(((p) & GENMASK(31, 22)) >> 22)
+/*
+ * Total burst count field, Rsvdz on controller with Extended TBC
+ * enabled (ETE).
+ */
+#define TRB_TBC(p)			(((p) & 0x3) << 7)
+#define TRB_TLBPC(p)			(((p) & 0xf) << 16)
+
+/* Cycle bit - indicates TRB ownership by driver or driver.*/
+#define TRB_CYCLE			BIT(0)
+/*
+ * Force next event data TRB to be evaluated before task switch.
+ * Used to pass OS data back after a TD completes.
+ */
+#define TRB_ENT				BIT(1)
+/* Interrupt on short packet. */
+#define TRB_ISP				BIT(2)
+/* Set PCIe no snoop attribute. */
+#define TRB_NO_SNOOP			BIT(3)
+/* Chain multiple TRBs into a TD. */
+#define TRB_CHAIN			BIT(4)
+/* Interrupt on completion. */
+#define TRB_IOC				BIT(5)
+/* The buffer pointer contains immediate data. */
+#define TRB_IDT				BIT(6)
+/* 0 - NRDY during data stage, 1 - NRDY during status stage (only control). */
+#define TRB_STAT			BIT(7)
+/* Block Event Interrupt. */
+#define TRB_BEI				BIT(9)
+
+/* Control transfer TRB specific fields. */
+#define TRB_DIR_IN			BIT(16)
+
+/* TRB bit mask in Data Stage TRB */
+#define TRB_SETUPID_BITMASK		GENMASK(9, 8)
+#define TRB_SETUPID(p)			((p) << 8)
+#define TRB_SETUPID_TO_TYPE(p)		(((p) & TRB_SETUPID_BITMASK) >> 8)
+
+#define TRB_SETUP_SPEEDID_USB3		0x1
+#define TRB_SETUP_SPEEDID_USB2		0x0
+#define TRB_SETUP_SPEEDID(p)		((p) & (1 << 7))
+
+#define TRB_SETUPSTAT_ACK		0x1
+#define TRB_SETUPSTAT_STALL		0x0
+#define TRB_SETUPSTAT(p)		((p) << 6)
+
+/* Isochronous TRB specific fields */
+#define TRB_SIA				BIT(31)
+#define TRB_FRAME_ID(p)			(((p) << 20) & GENMASK(30, 20))
+
+struct cdnsp_generic_trb {
+	__le32 field[4];
+};
+
+union cdnsp_trb {
+	struct cdnsp_link_trb link;
+	struct cdnsp_transfer_event trans_event;
+	struct cdnsp_event_cmd event_cmd;
+	struct cdnsp_generic_trb generic;
+};
+
+/* TRB bit mask. */
+#define TRB_TYPE_BITMASK	GENMASK(15, 10)
+#define TRB_TYPE(p)		((p) << 10)
+#define TRB_FIELD_TO_TYPE(p)	(((p) & TRB_TYPE_BITMASK) >> 10)
+
+/* TRB type IDs. */
+/* bulk, interrupt, isoc scatter/gather, and control data stage. */
+#define TRB_NORMAL		1
+/* Setup Stage for control transfers. */
+#define TRB_SETUP		2
+/* Data Stage for control transfers. */
+#define TRB_DATA		3
+/* Status Stage for control transfers. */
+#define TRB_STATUS		4
+/* ISOC transfers. */
+#define TRB_ISOC		5
+/* TRB for linking ring segments. */
+#define TRB_LINK		6
+#define TRB_EVENT_DATA		7
+/* Transfer Ring No-op (not for the command ring). */
+#define TRB_TR_NOOP		8
+
+/* Command TRBs */
+/* Enable Slot Command. */
+#define TRB_ENABLE_SLOT		9
+/* Disable Slot Command. */
+#define TRB_DISABLE_SLOT	10
+/* Address Device Command. */
+#define TRB_ADDR_DEV		11
+/* Configure Endpoint Command. */
+#define TRB_CONFIG_EP		12
+/* Evaluate Context Command. */
+#define TRB_EVAL_CONTEXT	13
+/* Reset Endpoint Command. */
+#define TRB_RESET_EP		14
+/* Stop Transfer Ring Command. */
+#define TRB_STOP_RING		15
+/* Set Transfer Ring Dequeue Pointer Command. */
+#define TRB_SET_DEQ		16
+/* Reset Device Command. */
+#define TRB_RESET_DEV		17
+/* Force Event Command (opt). */
+#define TRB_FORCE_EVENT		18
+/* Force Header Command - generate a transaction or link management packet. */
+#define TRB_FORCE_HEADER	22
+/* No-op Command - not for transfer rings. */
+#define TRB_CMD_NOOP		23
+/* TRB IDs 24-31 reserved. */
+
+/* Event TRBS. */
+/* Transfer Event. */
+#define TRB_TRANSFER		32
+/* Command Completion Event. */
+#define TRB_COMPLETION		33
+/* Port Status Change Event. */
+#define TRB_PORT_STATUS		34
+/* Device Controller Event. */
+#define TRB_HC_EVENT		37
+/* MFINDEX Wrap Event - microframe counter wrapped. */
+#define TRB_MFINDEX_WRAP	39
+/* TRB IDs 40-47 reserved. */
+/* Endpoint Not Ready Event. */
+#define TRB_ENDPOINT_NRDY	48
+/* TRB IDs 49-53 reserved. */
+/* Halt Endpoint Command. */
+#define TRB_HALT_ENDPOINT	54
+/* Doorbell Overflow Event. */
+#define TRB_DRB_OVERFLOW	57
+/* Flush Endpoint Command. */
+#define TRB_FLUSH_ENDPOINT	58
+
+#define TRB_TYPE_LINK(x)	(((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
+#define TRB_TYPE_LINK_LE32(x)	(((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
+					cpu_to_le32(TRB_TYPE(TRB_LINK)))
+#define TRB_TYPE_NOOP_LE32(x)	(((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
+					cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
+
+/*
+ * TRBS_PER_SEGMENT must be a multiple of 4.
+ * The command ring is 64-byte aligned, so it must also be greater than 16.
+ */
+#define TRBS_PER_SEGMENT		256
+#define TRBS_PER_EVENT_SEGMENT		256
+#define TRBS_PER_EV_DEQ_UPDATE		100
+#define TRB_SEGMENT_SIZE		(TRBS_PER_SEGMENT * 16)
+#define TRB_SEGMENT_SHIFT		(ilog2(TRB_SEGMENT_SIZE))
+/* TRB buffer pointers can't cross 64KB boundaries. */
+#define TRB_MAX_BUFF_SHIFT		16
+#define TRB_MAX_BUFF_SIZE		BIT(TRB_MAX_BUFF_SHIFT)
+/* How much data is left before the 64KB boundary? */
+#define TRB_BUFF_LEN_UP_TO_BOUNDARY(addr) (TRB_MAX_BUFF_SIZE - \
+					((addr) & (TRB_MAX_BUFF_SIZE - 1)))
+
+/**
+ * struct cdnsp_segment - segment related data.
+ * @trbs: Array of Transfer Request Blocks.
+ * @next: Pointer to the next segment.
+ * @dma: DMA address of current segment.
+ * @bounce_dma: Bounce  buffer DMA address .
+ * @bounce_buf: Bounce buffer virtual address.
+ * bounce_offs: Bounce buffer offset.
+ * bounce_len: Bounce buffer length.
+ */
+struct cdnsp_segment {
+	union cdnsp_trb *trbs;
+	struct cdnsp_segment *next;
+	dma_addr_t dma;
+	/* Max packet sized bounce buffer for td-fragmant alignment */
+	dma_addr_t bounce_dma;
+	void *bounce_buf;
+	unsigned int bounce_offs;
+	unsigned int bounce_len;
+};
+
+/**
+ * struct cdnsp_td - Transfer Descriptor object.
+ * @td_list: Used for binding TD with ep_ring->td_list.
+ * @preq: Request associated with this TD
+ * @start_seg: Segment containing the first_trb in TD.
+ * @first_trb: First TRB for this TD.
+ * @last_trb: Last TRB related with TD.
+ * @bounce_seg: Bounce segment for this TD.
+ * @request_length_set: actual_length of the request has already been set.
+ * @drbl - TD has been added to HW scheduler - only for stream capable
+ *         endpoints.
+ */
+struct cdnsp_td {
+	struct list_head td_list;
+	struct cdnsp_request *preq;
+	struct cdnsp_segment *start_seg;
+	union cdnsp_trb *first_trb;
+	union cdnsp_trb *last_trb;
+	struct cdnsp_segment *bounce_seg;
+	bool request_length_set;
+	bool drbl;
+};
+
+/**
+ * struct cdnsp_dequeue_state - New dequeue pointer for Transfer Ring.
+ * @new_deq_seg: New dequeue segment.
+ * @new_deq_ptr: New dequeue pointer.
+ * @new_cycle_state: New cycle state.
+ * @stream_id: stream id for which new dequeue pointer has been selected.
+ */
+struct cdnsp_dequeue_state {
+	struct cdnsp_segment *new_deq_seg;
+	union cdnsp_trb *new_deq_ptr;
+	int new_cycle_state;
+	unsigned int stream_id;
+};
+
+enum cdnsp_ring_type {
+	TYPE_CTRL = 0,
+	TYPE_ISOC,
+	TYPE_BULK,
+	TYPE_INTR,
+	TYPE_STREAM,
+	TYPE_COMMAND,
+	TYPE_EVENT,
+};
+
+/**
+ * struct cdnsp_ring - information describing transfer, command or event ring.
+ * @first_seg: First segment on transfer ring.
+ * @last_seg: Last segment on transfer ring.
+ * @enqueue: SW enqueue pointer address.
+ * @enq_seg: SW enqueue segment address.
+ * @dequeue: SW dequeue pointer address.
+ * @deq_seg: SW dequeue segment address.
+ * @td_list: transfer descriptor list associated with this ring.
+ * @cycle_state: Current cycle bit. Write the cycle state into the TRB cycle
+ *               field to give ownership of the TRB to the device controller
+ *               (if we are the producer) or to check if we own the TRB
+ *               (if we are the consumer).
+ * @stream_id: Stream id
+ * @stream_active: Stream is active - PRIME packet has been detected.
+ * @stream_rejected: This ring has been rejected by host.
+ * @num_tds: Number of TDs associated with ring.
+ * @num_segs: Number of segments.
+ * @num_trbs_free: Number of free TRBs on the ring.
+ * @bounce_buf_len: Length of bounce buffer.
+ * @type: Ring type - event, transfer, or command ring.
+ * @last_td_was_short - TD is short TD.
+ * @trb_address_map: For mapping physical TRB addresses to segments in
+ *                   stream rings.
+ */
+struct cdnsp_ring {
+	struct cdnsp_segment *first_seg;
+	struct cdnsp_segment *last_seg;
+	union cdnsp_trb	 *enqueue;
+	struct cdnsp_segment *enq_seg;
+	union cdnsp_trb	 *dequeue;
+	struct cdnsp_segment *deq_seg;
+	struct list_head td_list;
+	u32 cycle_state;
+	unsigned int stream_id;
+	unsigned int stream_active;
+	unsigned int stream_rejected;
+	int num_tds;
+	unsigned int num_segs;
+	unsigned int num_trbs_free;
+	unsigned int bounce_buf_len;
+	enum cdnsp_ring_type type;
+	bool last_td_was_short;
+	struct radix_tree_root *trb_address_map;
+};
+
+/**
+ * struct cdnsp_erst_entry - even ring segment table entry object.
+ * @seg_addr: 64-bit event ring segment address.
+ * seg_size: Number of TRBs in segment.;
+ */
+struct cdnsp_erst_entry {
+	__le64 seg_addr;
+	__le32 seg_size;
+	/* Set to zero */
+	__le32 rsvd;
+};
+
+/**
+ * struct cdnsp_erst - even ring segment table for event ring.
+ * @entries: Array of event ring segments
+ * @num_entries: Number of segments in entries array.
+ * @erst_dma_addr: DMA address for entries array.
+ */
+struct cdnsp_erst {
+	struct cdnsp_erst_entry *entries;
+	unsigned int num_entries;
+	dma_addr_t erst_dma_addr;
+};
+
+/**
+ * struct cdnsp_request - extended device side representation of usb_request
+ *                        object .
+ * @td: Transfer descriptor associated with this request.
+ * @request: Generic usb_request object describing single I/O request.
+ * @list: Used to adding request to endpoint pending_list.
+ * @pep: Extended representation of usb_ep object
+ * @epnum: Endpoint number associated with usb request.
+ * @direction: Endpoint direction for usb request.
+ */
+struct cdnsp_request {
+	struct	cdnsp_td td;
+	struct usb_request request;
+	struct list_head list;
+	struct cdnsp_ep	 *pep;
+	u8 epnum;
+	unsigned direction:1;
+};
+
+#define	ERST_NUM_SEGS	1
+
+/* Stages used during enumeration process.*/
+enum cdnsp_ep0_stage {
+	CDNSP_SETUP_STAGE,
+	CDNSP_DATA_STAGE,
+	CDNSP_STATUS_STAGE,
+};
+
+/**
+ * struct cdnsp_port - holds information about detected ports.
+ * @port_num: Port number.
+ * @exist: Indicate if port exist.
+ * maj_rev: Major revision.
+ * min_rev: Minor revision.
+ */
+struct cdnsp_port {
+	struct cdnsp_port_regs __iomem *regs;
+	u8 port_num;
+	u8 exist;
+	u8 maj_rev;
+	u8 min_rev;
+};
+
+#define CDNSP_EXT_PORT_MAJOR(x)		(((x) >> 24) & 0xff)
+#define CDNSP_EXT_PORT_MINOR(x)		(((x) >> 16) & 0xff)
+#define CDNSP_EXT_PORT_OFF(x)		((x) & 0xff)
+#define CDNSP_EXT_PORT_COUNT(x)		(((x) >> 8) & 0xff)
+
+/**
+ * struct cdnsp_device - represent USB device.
+ * @dev: Pointer to device structure associated whit this controller.
+ * @gadget: Device side representation of the peripheral controller.
+ * @gadget_driver: Pointer to the gadget driver.
+ * @irq: IRQ line number used by device side.
+ * @regs:IO device memory.
+ * @cap_regs: Capability registers.
+ * @op_regs: Operational registers.
+ * @run_regs: Runtime registers.
+ * @dba: Device base address register.
+ * @ir_set: Current interrupter register set.
+ * @port20_regs: Port 2.0 Peripheral Configuration Registers.
+ * @port3x_regs: USB3.x Port Peripheral Configuration Registers.
+ * @rev_cap: Controller Capabilities Registers.
+ * @hcs_params1: Cached register copies of read-only HCSPARAMS1
+ * @hcc_params: Cached register copies of read-only HCCPARAMS1
+ * @setup: Temporary buffer for setup packet.
+ * @ep0_preq: Internal allocated request used during enumeration.
+ * @ep0_stage: ep0 stage during enumeration process.
+ * @three_stage_setup: Three state or two state setup.
+ * @ep0_expect_in: Data IN expected for control transfer.
+ * @setup_id: Setup identifier.
+ * @setup_speed - Speed detected for current SETUP packet.
+ * @setup_buf: Buffer for SETUP packet.
+ * @device_address: Current device address.
+ * @may_wakeup: remote wakeup enabled/disabled.
+ * @lock: Lock used in interrupt thread context.
+ * @hci_version: device controller version.
+ * @dcbaa: Device context base address array.
+ * @cmd_ring: Command ring.
+ * @cmd: Represent all what is needed to issue command on Command Ring.
+ * @event_ring: Event ring.
+ * @erst: Event Ring Segment table
+ * @slot_id: Current Slot ID. Should be 0 or 1.
+ * @out_ctx: Output context.
+ * @in_ctx: Input context.
+ * @eps: array of endpoints object associated with device.
+ * @usb2_hw_lpm_capable: hardware lpm is enabled;
+ * @u1_allowed: Allow device transition to U1 state.
+ * @u2_allowed: Allow device transition to U2 state
+ * @device_pool: DMA pool for allocating input and output context.
+ * @segment_pool: DMA pool for allocating new segments.
+ * @cdnsp_state: Current state of controller.
+ * @link_state: Current link state.
+ * @usb2_port - Port USB 2.0.
+ * @usb3_port - Port USB 3.0.
+ * @active_port - Current selected Port.
+ * @test_mode: selected Test Mode.
+ */
+struct cdnsp_device {
+	struct device *dev;
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *gadget_driver;
+	unsigned int irq;
+	void __iomem *regs;
+
+	/* Registers map */
+	struct cdnsp_cap_regs __iomem *cap_regs;
+	struct cdnsp_op_regs __iomem *op_regs;
+	struct cdnsp_run_regs __iomem *run_regs;
+	struct cdnsp_doorbell_array __iomem *dba;
+	struct	cdnsp_intr_reg __iomem *ir_set;
+	struct cdnsp_20port_cap __iomem *port20_regs;
+	struct cdnsp_3xport_cap __iomem *port3x_regs;
+	struct cdnsp_rev_cap __iomem *rev_cap;
+
+	/* Cached register copies of read-only CDNSP data */
+	__u32 hcs_params1;
+	__u32 hcs_params3;
+	__u32 hcc_params;
+	/* Lock used in interrupt thread context. */
+	spinlock_t lock;
+	struct usb_ctrlrequest setup;
+	struct cdnsp_request ep0_preq;
+	enum cdnsp_ep0_stage ep0_stage;
+	u8 three_stage_setup;
+	u8 ep0_expect_in;
+	u8 setup_id;
+	u8 setup_speed;
+	void *setup_buf;
+	u8 device_address;
+	int may_wakeup;
+	u16 hci_version;
+
+	/* data structures */
+	struct cdnsp_device_context_array *dcbaa;
+	struct cdnsp_ring *cmd_ring;
+	struct cdnsp_command cmd;
+	struct cdnsp_ring *event_ring;
+	struct cdnsp_erst erst;
+	int slot_id;
+
+	/*
+	 * Commands to the hardware are passed an "input context" that
+	 * tells the hardware what to change in its data structures.
+	 * The hardware will return changes in an "output context" that
+	 * software must allocate for the hardware. .
+	 */
+	struct cdnsp_container_ctx out_ctx;
+	struct cdnsp_container_ctx in_ctx;
+	struct cdnsp_ep eps[CDNSP_ENDPOINTS_NUM];
+	u8 usb2_hw_lpm_capable:1;
+	u8 u1_allowed:1;
+	u8 u2_allowed:1;
+
+	/* DMA pools */
+	struct dma_pool *device_pool;
+	struct dma_pool	*segment_pool;
+
+#define CDNSP_STATE_HALTED		BIT(1)
+#define CDNSP_STATE_DYING		BIT(2)
+#define CDNSP_STATE_DISCONNECT_PENDING	BIT(3)
+#define CDNSP_WAKEUP_PENDING		BIT(4)
+	unsigned int cdnsp_state;
+	unsigned int link_state;
+
+	struct cdnsp_port usb2_port;
+	struct cdnsp_port usb3_port;
+	struct cdnsp_port *active_port;
+	u16 test_mode;
+};
+
+/*
+ * Registers should always be accessed with double word or quad word accesses.
+ *
+ * Registers with 64-bit address pointers should be written to with
+ * dword accesses by writing the low dword first (ptr[0]), then the high dword
+ * (ptr[1]) second. controller implementations that do not support 64-bit
+ * address pointers will ignore the high dword, and write order is irrelevant.
+ */
+static inline u64 cdnsp_read_64(__le64 __iomem *regs)
+{
+	return lo_hi_readq(regs);
+}
+
+static inline void cdnsp_write_64(const u64 val, __le64 __iomem *regs)
+{
+	lo_hi_writeq(val, regs);
+}
+
+/* CDNSP memory management functions. */
+void cdnsp_mem_cleanup(struct cdnsp_device *pdev);
+int cdnsp_mem_init(struct cdnsp_device *pdev);
+int cdnsp_setup_addressable_priv_dev(struct cdnsp_device *pdev);
+void cdnsp_copy_ep0_dequeue_into_input_ctx(struct cdnsp_device *pdev);
+void cdnsp_endpoint_zero(struct cdnsp_device *pdev, struct cdnsp_ep *ep);
+int cdnsp_endpoint_init(struct cdnsp_device *pdev,
+			struct cdnsp_ep *pep,
+			gfp_t mem_flags);
+int cdnsp_ring_expansion(struct cdnsp_device *pdev,
+			 struct cdnsp_ring *ring,
+			 unsigned int num_trbs, gfp_t flags);
+struct cdnsp_ring *cdnsp_dma_to_transfer_ring(struct cdnsp_ep *ep, u64 address);
+int cdnsp_alloc_stream_info(struct cdnsp_device *pdev,
+			    struct cdnsp_ep *pep,
+			    unsigned int num_stream_ctxs,
+			    unsigned int num_streams);
+int cdnsp_alloc_streams(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
+void cdnsp_free_endpoint_rings(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
+
+/* Device controller glue. */
+int cdnsp_find_next_ext_cap(void __iomem *base, u32 start, int id);
+int cdnsp_halt(struct cdnsp_device *pdev);
+void cdnsp_died(struct cdnsp_device *pdev);
+int cdnsp_reset(struct cdnsp_device *pdev);
+irqreturn_t cdnsp_irq_handler(int irq, void *priv);
+int cdnsp_setup_device(struct cdnsp_device *pdev, enum cdnsp_setup_dev setup);
+void cdnsp_set_usb2_hardware_lpm(struct cdnsp_device *usbsssp_data,
+				 struct usb_request *req, int enable);
+irqreturn_t cdnsp_thread_irq_handler(int irq, void *data);
+
+/* Ring, segment, TRB, and TD functions. */
+dma_addr_t cdnsp_trb_virt_to_dma(struct cdnsp_segment *seg,
+				 union cdnsp_trb *trb);
+bool cdnsp_last_trb_on_seg(struct cdnsp_segment *seg, union cdnsp_trb *trb);
+bool cdnsp_last_trb_on_ring(struct cdnsp_ring *ring,
+			    struct cdnsp_segment *seg,
+			    union cdnsp_trb *trb);
+int cdnsp_wait_for_cmd_compl(struct cdnsp_device *pdev);
+void cdnsp_update_erst_dequeue(struct cdnsp_device *pdev,
+			       union cdnsp_trb *event_ring_deq,
+			       u8 clear_ehb);
+void cdnsp_initialize_ring_info(struct cdnsp_ring *ring);
+void cdnsp_ring_cmd_db(struct cdnsp_device *pdev);
+void cdnsp_queue_slot_control(struct cdnsp_device *pdev, u32 trb_type);
+void cdnsp_queue_address_device(struct cdnsp_device *pdev,
+				dma_addr_t in_ctx_ptr,
+				enum cdnsp_setup_dev setup);
+void cdnsp_queue_stop_endpoint(struct cdnsp_device *pdev,
+			       unsigned int ep_index);
+int cdnsp_queue_ctrl_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq);
+int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq);
+int cdnsp_queue_isoc_tx_prepare(struct cdnsp_device *pdev,
+				struct cdnsp_request *preq);
+void cdnsp_queue_configure_endpoint(struct cdnsp_device *pdev,
+				    dma_addr_t in_ctx_ptr);
+void cdnsp_queue_reset_ep(struct cdnsp_device *pdev, unsigned int ep_index);
+void cdnsp_queue_halt_endpoint(struct cdnsp_device *pdev,
+			       unsigned int ep_index);
+void cdnsp_queue_flush_endpoint(struct cdnsp_device *pdev,
+				unsigned int ep_index);
+void cdnsp_force_header_wakeup(struct cdnsp_device *pdev, int intf_num);
+void cdnsp_queue_reset_device(struct cdnsp_device *pdev);
+void cdnsp_queue_new_dequeue_state(struct cdnsp_device *pdev,
+				   struct cdnsp_ep *pep,
+				   struct cdnsp_dequeue_state *deq_state);
+void cdnsp_ring_doorbell_for_active_rings(struct cdnsp_device *pdev,
+					  struct cdnsp_ep *pep);
+void cdnsp_inc_deq(struct cdnsp_device *pdev, struct cdnsp_ring *ring);
+void cdnsp_set_link_state(struct cdnsp_device *pdev,
+			  __le32 __iomem *port_regs, u32 link_state);
+u32 cdnsp_port_state_to_neutral(u32 state);
+
+/* CDNSP device controller contexts. */
+int cdnsp_enable_slot(struct cdnsp_device *pdev);
+int cdnsp_disable_slot(struct cdnsp_device *pdev);
+struct cdnsp_input_control_ctx
+	*cdnsp_get_input_control_ctx(struct cdnsp_container_ctx *ctx);
+struct cdnsp_slot_ctx *cdnsp_get_slot_ctx(struct cdnsp_container_ctx *ctx);
+struct cdnsp_ep_ctx *cdnsp_get_ep_ctx(struct cdnsp_container_ctx *ctx,
+				      unsigned int ep_index);
+/* CDNSP gadget interface. */
+void cdnsp_suspend_gadget(struct cdnsp_device *pdev);
+void cdnsp_resume_gadget(struct cdnsp_device *pdev);
+void cdnsp_disconnect_gadget(struct cdnsp_device *pdev);
+void cdnsp_gadget_giveback(struct cdnsp_ep *pep, struct cdnsp_request *preq,
+			   int status);
+int cdnsp_ep_enqueue(struct cdnsp_ep *pep, struct cdnsp_request *preq);
+int cdnsp_ep_dequeue(struct cdnsp_ep *pep, struct cdnsp_request *preq);
+unsigned int cdnsp_port_speed(unsigned int port_status);
+void cdnsp_irq_reset(struct cdnsp_device *pdev);
+int cdnsp_halt_endpoint(struct cdnsp_device *pdev,
+			struct cdnsp_ep *pep, int value);
+int cdnsp_cmd_stop_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
+int cdnsp_cmd_flush_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
+void cdnsp_setup_analyze(struct cdnsp_device *pdev);
+int cdnsp_status_stage(struct cdnsp_device *pdev);
+int cdnsp_reset_device(struct cdnsp_device *pdev);
+
+/**
+ * next_request - gets the next request on the given list
+ * @list: the request list to operate on
+ *
+ * Caller should take care of locking. This function return NULL or the first
+ * request available on list.
+ */
+static inline struct cdnsp_request *next_request(struct list_head *list)
+{
+	return list_first_entry_or_null(list, struct cdnsp_request, list);
+}
+
+#define to_cdnsp_ep(ep) (container_of(ep, struct cdnsp_ep, endpoint))
+#define gadget_to_cdnsp(g) (container_of(g, struct cdnsp_device, gadget))
+#define request_to_cdnsp_request(r) (container_of(r, struct cdnsp_request, \
+				     request))
+#define to_cdnsp_request(r) (container_of(r, struct cdnsp_request, request))
+int cdnsp_remove_request(struct cdnsp_device *pdev, struct cdnsp_request *preq,
+			 struct cdnsp_ep *pep);
+
+#endif /* __LINUX_CDNSP_GADGET_H */
diff --git a/drivers/usb/cdns3/cdnsp-mem.c b/drivers/usb/cdns3/cdnsp-mem.c
new file mode 100644
index 000000000..97866bfb2
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-mem.c
@@ -0,0 +1,1337 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence CDNSP DRD Driver.
+ *
+ * Copyright (C) 2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ * Code based on Linux XHCI driver.
+ * Origin: Copyright (C) 2008 Intel Corp.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include "cdnsp-gadget.h"
+#include "cdnsp-trace.h"
+
+static void cdnsp_free_stream_info(struct cdnsp_device *pdev,
+				   struct cdnsp_ep *pep);
+/*
+ * Allocates a generic ring segment from the ring pool, sets the dma address,
+ * initializes the segment to zero, and sets the private next pointer to NULL.
+ *
+ * "All components of all Command and Transfer TRBs shall be initialized to '0'"
+ */
+static struct cdnsp_segment *cdnsp_segment_alloc(struct cdnsp_device *pdev,
+						 unsigned int cycle_state,
+						 unsigned int max_packet,
+						 gfp_t flags)
+{
+	struct cdnsp_segment *seg;
+	dma_addr_t dma;
+	int i;
+
+	seg = kzalloc(sizeof(*seg), flags);
+	if (!seg)
+		return NULL;
+
+	seg->trbs = dma_pool_zalloc(pdev->segment_pool, flags, &dma);
+	if (!seg->trbs) {
+		kfree(seg);
+		return NULL;
+	}
+
+	if (max_packet) {
+		seg->bounce_buf = kzalloc(max_packet, flags | GFP_DMA);
+		if (!seg->bounce_buf)
+			goto free_dma;
+	}
+
+	/* If the cycle state is 0, set the cycle bit to 1 for all the TRBs. */
+	if (cycle_state == 0) {
+		for (i = 0; i < TRBS_PER_SEGMENT; i++)
+			seg->trbs[i].link.control |= cpu_to_le32(TRB_CYCLE);
+	}
+	seg->dma = dma;
+	seg->next = NULL;
+
+	return seg;
+
+free_dma:
+	dma_pool_free(pdev->segment_pool, seg->trbs, dma);
+	kfree(seg);
+
+	return NULL;
+}
+
+static void cdnsp_segment_free(struct cdnsp_device *pdev,
+			       struct cdnsp_segment *seg)
+{
+	if (seg->trbs)
+		dma_pool_free(pdev->segment_pool, seg->trbs, seg->dma);
+
+	kfree(seg->bounce_buf);
+	kfree(seg);
+}
+
+static void cdnsp_free_segments_for_ring(struct cdnsp_device *pdev,
+					 struct cdnsp_segment *first)
+{
+	struct cdnsp_segment *seg;
+
+	seg = first->next;
+
+	while (seg != first) {
+		struct cdnsp_segment *next = seg->next;
+
+		cdnsp_segment_free(pdev, seg);
+		seg = next;
+	}
+
+	cdnsp_segment_free(pdev, first);
+}
+
+/*
+ * Make the prev segment point to the next segment.
+ *
+ * Change the last TRB in the prev segment to be a Link TRB which points to the
+ * DMA address of the next segment. The caller needs to set any Link TRB
+ * related flags, such as End TRB, Toggle Cycle, and no snoop.
+ */
+static void cdnsp_link_segments(struct cdnsp_device *pdev,
+				struct cdnsp_segment *prev,
+				struct cdnsp_segment *next,
+				enum cdnsp_ring_type type)
+{
+	struct cdnsp_link_trb *link;
+	u32 val;
+
+	if (!prev || !next)
+		return;
+
+	prev->next = next;
+	if (type != TYPE_EVENT) {
+		link = &prev->trbs[TRBS_PER_SEGMENT - 1].link;
+		link->segment_ptr = cpu_to_le64(next->dma);
+
+		/*
+		 * Set the last TRB in the segment to have a TRB type ID
+		 * of Link TRB
+		 */
+		val = le32_to_cpu(link->control);
+		val &= ~TRB_TYPE_BITMASK;
+		val |= TRB_TYPE(TRB_LINK);
+		link->control = cpu_to_le32(val);
+	}
+}
+
+/*
+ * Link the ring to the new segments.
+ * Set Toggle Cycle for the new ring if needed.
+ */
+static void cdnsp_link_rings(struct cdnsp_device *pdev,
+			     struct cdnsp_ring *ring,
+			     struct cdnsp_segment *first,
+			     struct cdnsp_segment *last,
+			     unsigned int num_segs)
+{
+	struct cdnsp_segment *next;
+
+	if (!ring || !first || !last)
+		return;
+
+	next = ring->enq_seg->next;
+	cdnsp_link_segments(pdev, ring->enq_seg, first, ring->type);
+	cdnsp_link_segments(pdev, last, next, ring->type);
+	ring->num_segs += num_segs;
+	ring->num_trbs_free += (TRBS_PER_SEGMENT - 1) * num_segs;
+
+	if (ring->type != TYPE_EVENT && ring->enq_seg == ring->last_seg) {
+		ring->last_seg->trbs[TRBS_PER_SEGMENT - 1].link.control &=
+			~cpu_to_le32(LINK_TOGGLE);
+		last->trbs[TRBS_PER_SEGMENT - 1].link.control |=
+			cpu_to_le32(LINK_TOGGLE);
+		ring->last_seg = last;
+	}
+}
+
+/*
+ * We need a radix tree for mapping physical addresses of TRBs to which stream
+ * ID they belong to. We need to do this because the device controller won't
+ * tell us which stream ring the TRB came from. We could store the stream ID
+ * in an event data TRB, but that doesn't help us for the cancellation case,
+ * since the endpoint may stop before it reaches that event data TRB.
+ *
+ * The radix tree maps the upper portion of the TRB DMA address to a ring
+ * segment that has the same upper portion of DMA addresses. For example,
+ * say I have segments of size 1KB, that are always 1KB aligned. A segment may
+ * start at 0x10c91000 and end at 0x10c913f0. If I use the upper 10 bits, the
+ * key to the stream ID is 0x43244. I can use the DMA address of the TRB to
+ * pass the radix tree a key to get the right stream ID:
+ *
+ *	0x10c90fff >> 10 = 0x43243
+ *	0x10c912c0 >> 10 = 0x43244
+ *	0x10c91400 >> 10 = 0x43245
+ *
+ * Obviously, only those TRBs with DMA addresses that are within the segment
+ * will make the radix tree return the stream ID for that ring.
+ *
+ * Caveats for the radix tree:
+ *
+ * The radix tree uses an unsigned long as a key pair. On 32-bit systems, an
+ * unsigned long will be 32-bits; on a 64-bit system an unsigned long will be
+ * 64-bits. Since we only request 32-bit DMA addresses, we can use that as the
+ * key on 32-bit or 64-bit systems (it would also be fine if we asked for 64-bit
+ * PCI DMA addresses on a 64-bit system). There might be a problem on 32-bit
+ * extended systems (where the DMA address can be bigger than 32-bits),
+ * if we allow the PCI dma mask to be bigger than 32-bits. So don't do that.
+ */
+static int cdnsp_insert_segment_mapping(struct radix_tree_root *trb_address_map,
+					struct cdnsp_ring *ring,
+					struct cdnsp_segment *seg,
+					gfp_t mem_flags)
+{
+	unsigned long key;
+	int ret;
+
+	key = (unsigned long)(seg->dma >> TRB_SEGMENT_SHIFT);
+
+	/* Skip any segments that were already added. */
+	if (radix_tree_lookup(trb_address_map, key))
+		return 0;
+
+	ret = radix_tree_maybe_preload(mem_flags);
+	if (ret)
+		return ret;
+
+	ret = radix_tree_insert(trb_address_map, key, ring);
+	radix_tree_preload_end();
+
+	return ret;
+}
+
+static void cdnsp_remove_segment_mapping(struct radix_tree_root *trb_address_map,
+					 struct cdnsp_segment *seg)
+{
+	unsigned long key;
+
+	key = (unsigned long)(seg->dma >> TRB_SEGMENT_SHIFT);
+	if (radix_tree_lookup(trb_address_map, key))
+		radix_tree_delete(trb_address_map, key);
+}
+
+static int cdnsp_update_stream_segment_mapping(struct radix_tree_root *trb_address_map,
+					       struct cdnsp_ring *ring,
+					       struct cdnsp_segment *first_seg,
+					       struct cdnsp_segment *last_seg,
+					       gfp_t mem_flags)
+{
+	struct cdnsp_segment *failed_seg;
+	struct cdnsp_segment *seg;
+	int ret;
+
+	seg = first_seg;
+	do {
+		ret = cdnsp_insert_segment_mapping(trb_address_map, ring, seg,
+						   mem_flags);
+		if (ret)
+			goto remove_streams;
+		if (seg == last_seg)
+			return 0;
+		seg = seg->next;
+	} while (seg != first_seg);
+
+	return 0;
+
+remove_streams:
+	failed_seg = seg;
+	seg = first_seg;
+	do {
+		cdnsp_remove_segment_mapping(trb_address_map, seg);
+		if (seg == failed_seg)
+			return ret;
+		seg = seg->next;
+	} while (seg != first_seg);
+
+	return ret;
+}
+
+static void cdnsp_remove_stream_mapping(struct cdnsp_ring *ring)
+{
+	struct cdnsp_segment *seg;
+
+	seg = ring->first_seg;
+	do {
+		cdnsp_remove_segment_mapping(ring->trb_address_map, seg);
+		seg = seg->next;
+	} while (seg != ring->first_seg);
+}
+
+static int cdnsp_update_stream_mapping(struct cdnsp_ring *ring)
+{
+	return cdnsp_update_stream_segment_mapping(ring->trb_address_map, ring,
+			ring->first_seg, ring->last_seg, GFP_ATOMIC);
+}
+
+static void cdnsp_ring_free(struct cdnsp_device *pdev, struct cdnsp_ring *ring)
+{
+	if (!ring)
+		return;
+
+	trace_cdnsp_ring_free(ring);
+
+	if (ring->first_seg) {
+		if (ring->type == TYPE_STREAM)
+			cdnsp_remove_stream_mapping(ring);
+
+		cdnsp_free_segments_for_ring(pdev, ring->first_seg);
+	}
+
+	kfree(ring);
+}
+
+void cdnsp_initialize_ring_info(struct cdnsp_ring *ring)
+{
+	ring->enqueue = ring->first_seg->trbs;
+	ring->enq_seg = ring->first_seg;
+	ring->dequeue = ring->enqueue;
+	ring->deq_seg = ring->first_seg;
+
+	/*
+	 * The ring is initialized to 0. The producer must write 1 to the cycle
+	 * bit to handover ownership of the TRB, so PCS = 1. The consumer must
+	 * compare CCS to the cycle bit to check ownership, so CCS = 1.
+	 *
+	 * New rings are initialized with cycle state equal to 1; if we are
+	 * handling ring expansion, set the cycle state equal to the old ring.
+	 */
+	ring->cycle_state = 1;
+
+	/*
+	 * Each segment has a link TRB, and leave an extra TRB for SW
+	 * accounting purpose
+	 */
+	ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1;
+}
+
+/* Allocate segments and link them for a ring. */
+static int cdnsp_alloc_segments_for_ring(struct cdnsp_device *pdev,
+					 struct cdnsp_segment **first,
+					 struct cdnsp_segment **last,
+					 unsigned int num_segs,
+					 unsigned int cycle_state,
+					 enum cdnsp_ring_type type,
+					 unsigned int max_packet,
+					 gfp_t flags)
+{
+	struct cdnsp_segment *prev;
+
+	/* Allocate first segment. */
+	prev = cdnsp_segment_alloc(pdev, cycle_state, max_packet, flags);
+	if (!prev)
+		return -ENOMEM;
+
+	num_segs--;
+	*first = prev;
+
+	/* Allocate all other segments. */
+	while (num_segs > 0) {
+		struct cdnsp_segment	*next;
+
+		next = cdnsp_segment_alloc(pdev, cycle_state,
+					   max_packet, flags);
+		if (!next) {
+			cdnsp_free_segments_for_ring(pdev, *first);
+			return -ENOMEM;
+		}
+
+		cdnsp_link_segments(pdev, prev, next, type);
+
+		prev = next;
+		num_segs--;
+	}
+
+	cdnsp_link_segments(pdev, prev, *first, type);
+	*last = prev;
+
+	return 0;
+}
+
+/*
+ * Create a new ring with zero or more segments.
+ *
+ * Link each segment together into a ring.
+ * Set the end flag and the cycle toggle bit on the last segment.
+ */
+static struct cdnsp_ring *cdnsp_ring_alloc(struct cdnsp_device *pdev,
+					   unsigned int num_segs,
+					   enum cdnsp_ring_type type,
+					   unsigned int max_packet,
+					   gfp_t flags)
+{
+	struct cdnsp_ring *ring;
+	int ret;
+
+	ring = kzalloc(sizeof *(ring), flags);
+	if (!ring)
+		return NULL;
+
+	ring->num_segs = num_segs;
+	ring->bounce_buf_len = max_packet;
+	INIT_LIST_HEAD(&ring->td_list);
+	ring->type = type;
+
+	if (num_segs == 0)
+		return ring;
+
+	ret = cdnsp_alloc_segments_for_ring(pdev, &ring->first_seg,
+					    &ring->last_seg, num_segs,
+					    1, type, max_packet, flags);
+	if (ret)
+		goto fail;
+
+	/* Only event ring does not use link TRB. */
+	if (type != TYPE_EVENT)
+		ring->last_seg->trbs[TRBS_PER_SEGMENT - 1].link.control |=
+			cpu_to_le32(LINK_TOGGLE);
+
+	cdnsp_initialize_ring_info(ring);
+	trace_cdnsp_ring_alloc(ring);
+	return ring;
+fail:
+	kfree(ring);
+	return NULL;
+}
+
+void cdnsp_free_endpoint_rings(struct cdnsp_device *pdev, struct cdnsp_ep *pep)
+{
+	cdnsp_ring_free(pdev, pep->ring);
+	pep->ring = NULL;
+	cdnsp_free_stream_info(pdev, pep);
+}
+
+/*
+ * Expand an existing ring.
+ * Allocate a new ring which has same segment numbers and link the two rings.
+ */
+int cdnsp_ring_expansion(struct cdnsp_device *pdev,
+			 struct cdnsp_ring *ring,
+			 unsigned int num_trbs,
+			 gfp_t flags)
+{
+	unsigned int num_segs_needed;
+	struct cdnsp_segment *first;
+	struct cdnsp_segment *last;
+	unsigned int num_segs;
+	int ret;
+
+	num_segs_needed = (num_trbs + (TRBS_PER_SEGMENT - 1) - 1) /
+			(TRBS_PER_SEGMENT - 1);
+
+	/* Allocate number of segments we needed, or double the ring size. */
+	num_segs = max(ring->num_segs, num_segs_needed);
+
+	ret = cdnsp_alloc_segments_for_ring(pdev, &first, &last, num_segs,
+					    ring->cycle_state, ring->type,
+					    ring->bounce_buf_len, flags);
+	if (ret)
+		return -ENOMEM;
+
+	if (ring->type == TYPE_STREAM)
+		ret = cdnsp_update_stream_segment_mapping(ring->trb_address_map,
+							  ring, first,
+							  last, flags);
+
+	if (ret) {
+		cdnsp_free_segments_for_ring(pdev, first);
+
+		return ret;
+	}
+
+	cdnsp_link_rings(pdev, ring, first, last, num_segs);
+	trace_cdnsp_ring_expansion(ring);
+
+	return 0;
+}
+
+static int cdnsp_init_device_ctx(struct cdnsp_device *pdev)
+{
+	int size = HCC_64BYTE_CONTEXT(pdev->hcc_params) ? 2048 : 1024;
+
+	pdev->out_ctx.type = CDNSP_CTX_TYPE_DEVICE;
+	pdev->out_ctx.size = size;
+	pdev->out_ctx.ctx_size = CTX_SIZE(pdev->hcc_params);
+	pdev->out_ctx.bytes = dma_pool_zalloc(pdev->device_pool, GFP_ATOMIC,
+					      &pdev->out_ctx.dma);
+
+	if (!pdev->out_ctx.bytes)
+		return -ENOMEM;
+
+	pdev->in_ctx.type = CDNSP_CTX_TYPE_INPUT;
+	pdev->in_ctx.ctx_size = pdev->out_ctx.ctx_size;
+	pdev->in_ctx.size = size + pdev->out_ctx.ctx_size;
+	pdev->in_ctx.bytes = dma_pool_zalloc(pdev->device_pool, GFP_ATOMIC,
+					     &pdev->in_ctx.dma);
+
+	if (!pdev->in_ctx.bytes) {
+		dma_pool_free(pdev->device_pool, pdev->out_ctx.bytes,
+			      pdev->out_ctx.dma);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+struct cdnsp_input_control_ctx
+	*cdnsp_get_input_control_ctx(struct cdnsp_container_ctx *ctx)
+{
+	if (ctx->type != CDNSP_CTX_TYPE_INPUT)
+		return NULL;
+
+	return (struct cdnsp_input_control_ctx *)ctx->bytes;
+}
+
+struct cdnsp_slot_ctx *cdnsp_get_slot_ctx(struct cdnsp_container_ctx *ctx)
+{
+	if (ctx->type == CDNSP_CTX_TYPE_DEVICE)
+		return (struct cdnsp_slot_ctx *)ctx->bytes;
+
+	return (struct cdnsp_slot_ctx *)(ctx->bytes + ctx->ctx_size);
+}
+
+struct cdnsp_ep_ctx *cdnsp_get_ep_ctx(struct cdnsp_container_ctx *ctx,
+				      unsigned int ep_index)
+{
+	/* Increment ep index by offset of start of ep ctx array. */
+	ep_index++;
+	if (ctx->type == CDNSP_CTX_TYPE_INPUT)
+		ep_index++;
+
+	return (struct cdnsp_ep_ctx *)(ctx->bytes + (ep_index * ctx->ctx_size));
+}
+
+static void cdnsp_free_stream_ctx(struct cdnsp_device *pdev,
+				  struct cdnsp_ep *pep)
+{
+	dma_pool_free(pdev->device_pool, pep->stream_info.stream_ctx_array,
+		      pep->stream_info.ctx_array_dma);
+}
+
+/* The stream context array must be a power of 2. */
+static struct cdnsp_stream_ctx
+	*cdnsp_alloc_stream_ctx(struct cdnsp_device *pdev, struct cdnsp_ep *pep)
+{
+	size_t size = sizeof(struct cdnsp_stream_ctx) *
+		      pep->stream_info.num_stream_ctxs;
+
+	if (size > CDNSP_CTX_SIZE)
+		return NULL;
+
+	/**
+	 * Driver uses intentionally the device_pool to allocated stream
+	 * context array. Device Pool has 2048 bytes of size what gives us
+	 * 128 entries.
+	 */
+	return dma_pool_zalloc(pdev->device_pool, GFP_DMA32 | GFP_ATOMIC,
+			       &pep->stream_info.ctx_array_dma);
+}
+
+struct cdnsp_ring *cdnsp_dma_to_transfer_ring(struct cdnsp_ep *pep, u64 address)
+{
+	if (pep->ep_state & EP_HAS_STREAMS)
+		return radix_tree_lookup(&pep->stream_info.trb_address_map,
+					 address >> TRB_SEGMENT_SHIFT);
+
+	return pep->ring;
+}
+
+/*
+ * Change an endpoint's internal structure so it supports stream IDs.
+ * The number of requested streams includes stream 0, which cannot be used by
+ * driver.
+ *
+ * The number of stream contexts in the stream context array may be bigger than
+ * the number of streams the driver wants to use. This is because the number of
+ * stream context array entries must be a power of two.
+ */
+int cdnsp_alloc_stream_info(struct cdnsp_device *pdev,
+			    struct cdnsp_ep *pep,
+			    unsigned int num_stream_ctxs,
+			    unsigned int num_streams)
+{
+	struct cdnsp_stream_info *stream_info;
+	struct cdnsp_ring *cur_ring;
+	u32 cur_stream;
+	u64 addr;
+	int ret;
+	int mps;
+
+	stream_info = &pep->stream_info;
+	stream_info->num_streams = num_streams;
+	stream_info->num_stream_ctxs = num_stream_ctxs;
+
+	/* Initialize the array of virtual pointers to stream rings. */
+	stream_info->stream_rings = kcalloc(num_streams,
+					    sizeof(struct cdnsp_ring *),
+					    GFP_ATOMIC);
+	if (!stream_info->stream_rings)
+		return -ENOMEM;
+
+	/* Initialize the array of DMA addresses for stream rings for the HW. */
+	stream_info->stream_ctx_array = cdnsp_alloc_stream_ctx(pdev, pep);
+	if (!stream_info->stream_ctx_array)
+		goto cleanup_stream_rings;
+
+	memset(stream_info->stream_ctx_array, 0,
+	       sizeof(struct cdnsp_stream_ctx) * num_stream_ctxs);
+	INIT_RADIX_TREE(&stream_info->trb_address_map, GFP_ATOMIC);
+	mps = usb_endpoint_maxp(pep->endpoint.desc);
+
+	/*
+	 * Allocate rings for all the streams that the driver will use,
+	 * and add their segment DMA addresses to the radix tree.
+	 * Stream 0 is reserved.
+	 */
+	for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
+		cur_ring = cdnsp_ring_alloc(pdev, 2, TYPE_STREAM, mps,
+					    GFP_ATOMIC);
+		stream_info->stream_rings[cur_stream] = cur_ring;
+
+		if (!cur_ring)
+			goto cleanup_rings;
+
+		cur_ring->stream_id = cur_stream;
+		cur_ring->trb_address_map = &stream_info->trb_address_map;
+
+		/* Set deq ptr, cycle bit, and stream context type. */
+		addr = cur_ring->first_seg->dma | SCT_FOR_CTX(SCT_PRI_TR) |
+		       cur_ring->cycle_state;
+
+		stream_info->stream_ctx_array[cur_stream].stream_ring =
+			cpu_to_le64(addr);
+
+		trace_cdnsp_set_stream_ring(cur_ring);
+
+		ret = cdnsp_update_stream_mapping(cur_ring);
+		if (ret)
+			goto cleanup_rings;
+	}
+
+	return 0;
+
+cleanup_rings:
+	for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
+		cur_ring = stream_info->stream_rings[cur_stream];
+		if (cur_ring) {
+			cdnsp_ring_free(pdev, cur_ring);
+			stream_info->stream_rings[cur_stream] = NULL;
+		}
+	}
+
+cleanup_stream_rings:
+	kfree(pep->stream_info.stream_rings);
+
+	return -ENOMEM;
+}
+
+/* Frees all stream contexts associated with the endpoint. */
+static void cdnsp_free_stream_info(struct cdnsp_device *pdev,
+				   struct cdnsp_ep *pep)
+{
+	struct cdnsp_stream_info *stream_info = &pep->stream_info;
+	struct cdnsp_ring *cur_ring;
+	int cur_stream;
+
+	if (!(pep->ep_state & EP_HAS_STREAMS))
+		return;
+
+	for (cur_stream = 1; cur_stream < stream_info->num_streams;
+	     cur_stream++) {
+		cur_ring = stream_info->stream_rings[cur_stream];
+		if (cur_ring) {
+			cdnsp_ring_free(pdev, cur_ring);
+			stream_info->stream_rings[cur_stream] = NULL;
+		}
+	}
+
+	if (stream_info->stream_ctx_array)
+		cdnsp_free_stream_ctx(pdev, pep);
+
+	kfree(stream_info->stream_rings);
+	pep->ep_state &= ~EP_HAS_STREAMS;
+}
+
+/* All the cdnsp_tds in the ring's TD list should be freed at this point.*/
+static void cdnsp_free_priv_device(struct cdnsp_device *pdev)
+{
+	pdev->dcbaa->dev_context_ptrs[1] = 0;
+
+	cdnsp_free_endpoint_rings(pdev, &pdev->eps[0]);
+
+	if (pdev->in_ctx.bytes)
+		dma_pool_free(pdev->device_pool, pdev->in_ctx.bytes,
+			      pdev->in_ctx.dma);
+
+	if (pdev->out_ctx.bytes)
+		dma_pool_free(pdev->device_pool, pdev->out_ctx.bytes,
+			      pdev->out_ctx.dma);
+
+	pdev->in_ctx.bytes = NULL;
+	pdev->out_ctx.bytes = NULL;
+}
+
+static int cdnsp_alloc_priv_device(struct cdnsp_device *pdev)
+{
+	int ret;
+
+	ret = cdnsp_init_device_ctx(pdev);
+	if (ret)
+		return ret;
+
+	/* Allocate endpoint 0 ring. */
+	pdev->eps[0].ring = cdnsp_ring_alloc(pdev, 2, TYPE_CTRL, 0, GFP_ATOMIC);
+	if (!pdev->eps[0].ring)
+		goto fail;
+
+	/* Point to output device context in dcbaa. */
+	pdev->dcbaa->dev_context_ptrs[1] = cpu_to_le64(pdev->out_ctx.dma);
+	pdev->cmd.in_ctx = &pdev->in_ctx;
+
+	trace_cdnsp_alloc_priv_device(pdev);
+	return 0;
+fail:
+	dma_pool_free(pdev->device_pool, pdev->out_ctx.bytes,
+		      pdev->out_ctx.dma);
+	dma_pool_free(pdev->device_pool, pdev->in_ctx.bytes,
+		      pdev->in_ctx.dma);
+
+	return ret;
+}
+
+void cdnsp_copy_ep0_dequeue_into_input_ctx(struct cdnsp_device *pdev)
+{
+	struct cdnsp_ep_ctx *ep0_ctx = pdev->eps[0].in_ctx;
+	struct cdnsp_ring *ep_ring = pdev->eps[0].ring;
+	dma_addr_t dma;
+
+	dma = cdnsp_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue);
+	ep0_ctx->deq = cpu_to_le64(dma | ep_ring->cycle_state);
+}
+
+/* Setup an controller private device for a Set Address command. */
+int cdnsp_setup_addressable_priv_dev(struct cdnsp_device *pdev)
+{
+	struct cdnsp_slot_ctx *slot_ctx;
+	struct cdnsp_ep_ctx *ep0_ctx;
+	u32 max_packets, port;
+
+	ep0_ctx = cdnsp_get_ep_ctx(&pdev->in_ctx, 0);
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->in_ctx);
+
+	/* Only the control endpoint is valid - one endpoint context. */
+	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1));
+
+	switch (pdev->gadget.speed) {
+	case USB_SPEED_SUPER_PLUS:
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SSP);
+		max_packets = MAX_PACKET(512);
+		break;
+	case USB_SPEED_SUPER:
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SS);
+		max_packets = MAX_PACKET(512);
+		break;
+	case USB_SPEED_HIGH:
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_HS);
+		max_packets = MAX_PACKET(64);
+		break;
+	case USB_SPEED_FULL:
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_FS);
+		max_packets = MAX_PACKET(64);
+		break;
+	default:
+		/* Speed was not set , this shouldn't happen. */
+		return -EINVAL;
+	}
+
+	port = DEV_PORT(pdev->active_port->port_num);
+	slot_ctx->dev_port |= cpu_to_le32(port);
+	slot_ctx->dev_state = cpu_to_le32((pdev->device_address &
+					   DEV_ADDR_MASK));
+	ep0_ctx->tx_info = cpu_to_le32(EP_AVG_TRB_LENGTH(0x8));
+	ep0_ctx->ep_info2 = cpu_to_le32(EP_TYPE(CTRL_EP));
+	ep0_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(0) | ERROR_COUNT(3) |
+					 max_packets);
+
+	ep0_ctx->deq = cpu_to_le64(pdev->eps[0].ring->first_seg->dma |
+				   pdev->eps[0].ring->cycle_state);
+
+	trace_cdnsp_setup_addressable_priv_device(pdev);
+
+	return 0;
+}
+
+/*
+ * Convert interval expressed as 2^(bInterval - 1) == interval into
+ * straight exponent value 2^n == interval.
+ */
+static unsigned int cdnsp_parse_exponent_interval(struct usb_gadget *g,
+						  struct cdnsp_ep *pep)
+{
+	unsigned int interval;
+
+	interval = clamp_val(pep->endpoint.desc->bInterval, 1, 16) - 1;
+	if (interval != pep->endpoint.desc->bInterval - 1)
+		dev_warn(&g->dev, "ep %s - rounding interval to %d %sframes\n",
+			 pep->name, 1 << interval,
+			 g->speed == USB_SPEED_FULL ? "" : "micro");
+
+	/*
+	 * Full speed isoc endpoints specify interval in frames,
+	 * not microframes. We are using microframes everywhere,
+	 * so adjust accordingly.
+	 */
+	if (g->speed == USB_SPEED_FULL)
+		interval += 3;	/* 1 frame = 2^3 uframes */
+
+	/* Controller handles only up to 512ms (2^12). */
+	if (interval > 12)
+		interval = 12;
+
+	return interval;
+}
+
+/*
+ * Convert bInterval expressed in microframes (in 1-255 range) to exponent of
+ * microframes, rounded down to nearest power of 2.
+ */
+static unsigned int cdnsp_microframes_to_exponent(struct usb_gadget *g,
+						  struct cdnsp_ep *pep,
+						  unsigned int desc_interval,
+						  unsigned int min_exponent,
+						  unsigned int max_exponent)
+{
+	unsigned int interval;
+
+	interval = fls(desc_interval) - 1;
+	return clamp_val(interval, min_exponent, max_exponent);
+}
+
+/*
+ * Return the polling interval.
+ *
+ * The polling interval is expressed in "microframes". If controllers's Interval
+ * field is set to N, it will service the endpoint every 2^(Interval)*125us.
+ */
+static unsigned int cdnsp_get_endpoint_interval(struct usb_gadget *g,
+						struct cdnsp_ep *pep)
+{
+	unsigned int interval = 0;
+
+	switch (g->speed) {
+	case USB_SPEED_HIGH:
+	case USB_SPEED_SUPER_PLUS:
+	case USB_SPEED_SUPER:
+		if (usb_endpoint_xfer_int(pep->endpoint.desc) ||
+		    usb_endpoint_xfer_isoc(pep->endpoint.desc))
+			interval = cdnsp_parse_exponent_interval(g, pep);
+		break;
+	case USB_SPEED_FULL:
+		if (usb_endpoint_xfer_isoc(pep->endpoint.desc)) {
+			interval = cdnsp_parse_exponent_interval(g, pep);
+		} else if (usb_endpoint_xfer_int(pep->endpoint.desc)) {
+			interval = pep->endpoint.desc->bInterval << 3;
+			interval = cdnsp_microframes_to_exponent(g, pep,
+								 interval,
+								 3, 10);
+		}
+
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	return interval;
+}
+
+/*
+ * The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
+ * High speed endpoint descriptors can define "the number of additional
+ * transaction opportunities per microframe", but that goes in the Max Burst
+ * endpoint context field.
+ */
+static u32 cdnsp_get_endpoint_mult(struct usb_gadget *g, struct cdnsp_ep *pep)
+{
+	if (g->speed < USB_SPEED_SUPER ||
+	    !usb_endpoint_xfer_isoc(pep->endpoint.desc))
+		return 0;
+
+	return pep->endpoint.comp_desc->bmAttributes;
+}
+
+static u32 cdnsp_get_endpoint_max_burst(struct usb_gadget *g,
+					struct cdnsp_ep *pep)
+{
+	/* Super speed and Plus have max burst in ep companion desc */
+	if (g->speed >= USB_SPEED_SUPER)
+		return pep->endpoint.comp_desc->bMaxBurst;
+
+	if (g->speed == USB_SPEED_HIGH &&
+	    (usb_endpoint_xfer_isoc(pep->endpoint.desc) ||
+	     usb_endpoint_xfer_int(pep->endpoint.desc)))
+		return usb_endpoint_maxp_mult(pep->endpoint.desc) - 1;
+
+	return 0;
+}
+
+static u32 cdnsp_get_endpoint_type(const struct usb_endpoint_descriptor *desc)
+{
+	int in;
+
+	in = usb_endpoint_dir_in(desc);
+
+	switch (usb_endpoint_type(desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		return CTRL_EP;
+	case USB_ENDPOINT_XFER_BULK:
+		return in ? BULK_IN_EP : BULK_OUT_EP;
+	case USB_ENDPOINT_XFER_ISOC:
+		return in ? ISOC_IN_EP : ISOC_OUT_EP;
+	case USB_ENDPOINT_XFER_INT:
+		return in ? INT_IN_EP : INT_OUT_EP;
+	}
+
+	return 0;
+}
+
+/*
+ * Return the maximum endpoint service interval time (ESIT) payload.
+ * Basically, this is the maxpacket size, multiplied by the burst size
+ * and mult size.
+ */
+static u32 cdnsp_get_max_esit_payload(struct usb_gadget *g,
+				      struct cdnsp_ep *pep)
+{
+	int max_packet;
+	int max_burst;
+
+	/* Only applies for interrupt or isochronous endpoints*/
+	if (usb_endpoint_xfer_control(pep->endpoint.desc) ||
+	    usb_endpoint_xfer_bulk(pep->endpoint.desc))
+		return 0;
+
+	/* SuperSpeedPlus Isoc ep sending over 48k per EIST. */
+	if (g->speed >= USB_SPEED_SUPER_PLUS &&
+	    USB_SS_SSP_ISOC_COMP(pep->endpoint.desc->bmAttributes))
+		return le16_to_cpu(pep->endpoint.comp_desc->wBytesPerInterval);
+	/* SuperSpeed or SuperSpeedPlus Isoc ep with less than 48k per esit */
+	else if (g->speed >= USB_SPEED_SUPER)
+		return le16_to_cpu(pep->endpoint.comp_desc->wBytesPerInterval);
+
+	max_packet = usb_endpoint_maxp(pep->endpoint.desc);
+	max_burst = usb_endpoint_maxp_mult(pep->endpoint.desc);
+
+	/* A 0 in max burst means 1 transfer per ESIT */
+	return max_packet * max_burst;
+}
+
+int cdnsp_endpoint_init(struct cdnsp_device *pdev,
+			struct cdnsp_ep *pep,
+			gfp_t mem_flags)
+{
+	enum cdnsp_ring_type ring_type;
+	struct cdnsp_ep_ctx *ep_ctx;
+	unsigned int err_count = 0;
+	unsigned int avg_trb_len;
+	unsigned int max_packet;
+	unsigned int max_burst;
+	unsigned int interval;
+	u32 max_esit_payload;
+	unsigned int mult;
+	u32 endpoint_type;
+	int ret;
+
+	ep_ctx = pep->in_ctx;
+
+	endpoint_type = cdnsp_get_endpoint_type(pep->endpoint.desc);
+	if (!endpoint_type)
+		return -EINVAL;
+
+	ring_type = usb_endpoint_type(pep->endpoint.desc);
+
+	/*
+	 * Get values to fill the endpoint context, mostly from ep descriptor.
+	 * The average TRB buffer length for bulk endpoints is unclear as we
+	 * have no clue on scatter gather list entry size. For Isoc and Int,
+	 * set it to max available.
+	 */
+	max_esit_payload = cdnsp_get_max_esit_payload(&pdev->gadget, pep);
+	interval = cdnsp_get_endpoint_interval(&pdev->gadget, pep);
+	mult = cdnsp_get_endpoint_mult(&pdev->gadget, pep);
+	max_packet = usb_endpoint_maxp(pep->endpoint.desc);
+	max_burst = cdnsp_get_endpoint_max_burst(&pdev->gadget, pep);
+	avg_trb_len = max_esit_payload;
+
+	/* Allow 3 retries for everything but isoc, set CErr = 3. */
+	if (!usb_endpoint_xfer_isoc(pep->endpoint.desc))
+		err_count = 3;
+	if (usb_endpoint_xfer_bulk(pep->endpoint.desc) &&
+	    pdev->gadget.speed == USB_SPEED_HIGH)
+		max_packet = 512;
+	/* Controller spec indicates that ctrl ep avg TRB Length should be 8. */
+	if (usb_endpoint_xfer_control(pep->endpoint.desc))
+		avg_trb_len = 8;
+
+	/* Set up the endpoint ring. */
+	pep->ring = cdnsp_ring_alloc(pdev, 2, ring_type, max_packet, mem_flags);
+	if (!pep->ring)
+		return -ENOMEM;
+
+	pep->skip = false;
+
+	/* Fill the endpoint context */
+	ep_ctx->ep_info = cpu_to_le32(EP_MAX_ESIT_PAYLOAD_HI(max_esit_payload) |
+				EP_INTERVAL(interval) | EP_MULT(mult));
+	ep_ctx->ep_info2 = cpu_to_le32(EP_TYPE(endpoint_type) |
+				MAX_PACKET(max_packet) | MAX_BURST(max_burst) |
+				ERROR_COUNT(err_count));
+	ep_ctx->deq = cpu_to_le64(pep->ring->first_seg->dma |
+				  pep->ring->cycle_state);
+
+	ep_ctx->tx_info = cpu_to_le32(EP_MAX_ESIT_PAYLOAD_LO(max_esit_payload) |
+				EP_AVG_TRB_LENGTH(avg_trb_len));
+
+	if (usb_endpoint_xfer_bulk(pep->endpoint.desc) &&
+	    pdev->gadget.speed > USB_SPEED_HIGH) {
+		ret = cdnsp_alloc_streams(pdev, pep);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+void cdnsp_endpoint_zero(struct cdnsp_device *pdev, struct cdnsp_ep *pep)
+{
+	pep->in_ctx->ep_info = 0;
+	pep->in_ctx->ep_info2 = 0;
+	pep->in_ctx->deq = 0;
+	pep->in_ctx->tx_info = 0;
+}
+
+static int cdnsp_alloc_erst(struct cdnsp_device *pdev,
+			    struct cdnsp_ring *evt_ring,
+			    struct cdnsp_erst *erst)
+{
+	struct cdnsp_erst_entry *entry;
+	struct cdnsp_segment *seg;
+	unsigned int val;
+	size_t size;
+
+	size = sizeof(struct cdnsp_erst_entry) * evt_ring->num_segs;
+	erst->entries = dma_alloc_coherent(pdev->dev, size,
+					   &erst->erst_dma_addr, GFP_KERNEL);
+	if (!erst->entries)
+		return -ENOMEM;
+
+	erst->num_entries = evt_ring->num_segs;
+
+	seg = evt_ring->first_seg;
+	for (val = 0; val < evt_ring->num_segs; val++) {
+		entry = &erst->entries[val];
+		entry->seg_addr = cpu_to_le64(seg->dma);
+		entry->seg_size = cpu_to_le32(TRBS_PER_SEGMENT);
+		entry->rsvd = 0;
+		seg = seg->next;
+	}
+
+	return 0;
+}
+
+static void cdnsp_free_erst(struct cdnsp_device *pdev, struct cdnsp_erst *erst)
+{
+	size_t size = sizeof(struct cdnsp_erst_entry) * (erst->num_entries);
+	struct device *dev = pdev->dev;
+
+	if (erst->entries)
+		dma_free_coherent(dev, size, erst->entries,
+				  erst->erst_dma_addr);
+
+	erst->entries = NULL;
+}
+
+void cdnsp_mem_cleanup(struct cdnsp_device *pdev)
+{
+	struct device *dev = pdev->dev;
+
+	cdnsp_free_priv_device(pdev);
+	cdnsp_free_erst(pdev, &pdev->erst);
+
+	if (pdev->event_ring)
+		cdnsp_ring_free(pdev, pdev->event_ring);
+
+	pdev->event_ring = NULL;
+
+	if (pdev->cmd_ring)
+		cdnsp_ring_free(pdev, pdev->cmd_ring);
+
+	pdev->cmd_ring = NULL;
+
+	dma_pool_destroy(pdev->segment_pool);
+	pdev->segment_pool = NULL;
+	dma_pool_destroy(pdev->device_pool);
+	pdev->device_pool = NULL;
+
+	dma_free_coherent(dev, sizeof(*pdev->dcbaa),
+			  pdev->dcbaa, pdev->dcbaa->dma);
+
+	pdev->dcbaa = NULL;
+
+	pdev->usb2_port.exist = 0;
+	pdev->usb3_port.exist = 0;
+	pdev->usb2_port.port_num = 0;
+	pdev->usb3_port.port_num = 0;
+	pdev->active_port = NULL;
+}
+
+static void cdnsp_set_event_deq(struct cdnsp_device *pdev)
+{
+	dma_addr_t deq;
+	u64 temp;
+
+	deq = cdnsp_trb_virt_to_dma(pdev->event_ring->deq_seg,
+				    pdev->event_ring->dequeue);
+
+	/* Update controller event ring dequeue pointer */
+	temp = cdnsp_read_64(&pdev->ir_set->erst_dequeue);
+	temp &= ERST_PTR_MASK;
+
+	/*
+	 * Don't clear the EHB bit (which is RW1C) because
+	 * there might be more events to service.
+	 */
+	temp &= ~ERST_EHB;
+
+	cdnsp_write_64(((u64)deq & (u64)~ERST_PTR_MASK) | temp,
+		       &pdev->ir_set->erst_dequeue);
+}
+
+static void cdnsp_add_in_port(struct cdnsp_device *pdev,
+			      struct cdnsp_port *port,
+			      __le32 __iomem *addr)
+{
+	u32 temp, port_offset, port_count;
+
+	temp = readl(addr);
+	port->maj_rev = CDNSP_EXT_PORT_MAJOR(temp);
+	port->min_rev = CDNSP_EXT_PORT_MINOR(temp);
+
+	/* Port offset and count in the third dword.*/
+	temp = readl(addr + 2);
+	port_offset = CDNSP_EXT_PORT_OFF(temp);
+	port_count = CDNSP_EXT_PORT_COUNT(temp);
+
+	trace_cdnsp_port_info(addr, port_offset, port_count, port->maj_rev);
+
+	port->port_num = port_offset;
+	port->exist = 1;
+}
+
+/*
+ * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
+ * specify what speeds each port is supposed to be.
+ */
+static int cdnsp_setup_port_arrays(struct cdnsp_device *pdev)
+{
+	void __iomem *base;
+	u32 offset;
+	int i;
+
+	base = &pdev->cap_regs->hc_capbase;
+	offset = cdnsp_find_next_ext_cap(base, 0,
+					 EXT_CAP_CFG_DEV_20PORT_CAP_ID);
+	pdev->port20_regs = base + offset;
+
+	offset = cdnsp_find_next_ext_cap(base, 0, D_XEC_CFG_3XPORT_CAP);
+	pdev->port3x_regs =  base + offset;
+
+	offset = 0;
+	base = &pdev->cap_regs->hc_capbase;
+
+	/* Driver expects max 2 extended protocol capability. */
+	for (i = 0; i < 2; i++) {
+		u32 temp;
+
+		offset = cdnsp_find_next_ext_cap(base, offset,
+						 EXT_CAPS_PROTOCOL);
+		temp = readl(base + offset);
+
+		if (CDNSP_EXT_PORT_MAJOR(temp) == 0x03 &&
+		    !pdev->usb3_port.port_num)
+			cdnsp_add_in_port(pdev, &pdev->usb3_port,
+					  base + offset);
+
+		if (CDNSP_EXT_PORT_MAJOR(temp) == 0x02 &&
+		    !pdev->usb2_port.port_num)
+			cdnsp_add_in_port(pdev, &pdev->usb2_port,
+					  base + offset);
+	}
+
+	if (!pdev->usb2_port.exist || !pdev->usb3_port.exist) {
+		dev_err(pdev->dev, "Error: Only one port detected\n");
+		return -ENODEV;
+	}
+
+	trace_cdnsp_init("Found USB 2.0 ports and  USB 3.0 ports.");
+
+	pdev->usb2_port.regs = (struct cdnsp_port_regs __iomem *)
+			       (&pdev->op_regs->port_reg_base + NUM_PORT_REGS *
+				(pdev->usb2_port.port_num - 1));
+
+	pdev->usb3_port.regs = (struct cdnsp_port_regs __iomem *)
+			       (&pdev->op_regs->port_reg_base + NUM_PORT_REGS *
+				(pdev->usb3_port.port_num - 1));
+
+	return 0;
+}
+
+/*
+ * Initialize memory for CDNSP (one-time init).
+ *
+ * Program the PAGESIZE register, initialize the device context array, create
+ * device contexts, set up a command ring segment, create event
+ * ring (one for now).
+ */
+int cdnsp_mem_init(struct cdnsp_device *pdev)
+{
+	struct device *dev = pdev->dev;
+	int ret = -ENOMEM;
+	unsigned int val;
+	dma_addr_t dma;
+	u32 page_size;
+	u64 val_64;
+
+	/*
+	 * Use 4K pages, since that's common and the minimum the
+	 * controller supports
+	 */
+	page_size = 1 << 12;
+
+	val = readl(&pdev->op_regs->config_reg);
+	val |= ((val & ~MAX_DEVS) | CDNSP_DEV_MAX_SLOTS) | CONFIG_U3E;
+	writel(val, &pdev->op_regs->config_reg);
+
+	/*
+	 * Doorbell array must be physically contiguous
+	 * and 64-byte (cache line) aligned.
+	 */
+	pdev->dcbaa = dma_alloc_coherent(dev, sizeof(*pdev->dcbaa),
+					 &dma, GFP_KERNEL);
+	if (!pdev->dcbaa)
+		return -ENOMEM;
+
+	pdev->dcbaa->dma = dma;
+
+	cdnsp_write_64(dma, &pdev->op_regs->dcbaa_ptr);
+
+	/*
+	 * Initialize the ring segment pool.  The ring must be a contiguous
+	 * structure comprised of TRBs. The TRBs must be 16 byte aligned,
+	 * however, the command ring segment needs 64-byte aligned segments
+	 * and our use of dma addresses in the trb_address_map radix tree needs
+	 * TRB_SEGMENT_SIZE alignment, so driver pick the greater alignment
+	 * need.
+	 */
+	pdev->segment_pool = dma_pool_create("CDNSP ring segments", dev,
+					     TRB_SEGMENT_SIZE, TRB_SEGMENT_SIZE,
+					     page_size);
+	if (!pdev->segment_pool)
+		goto release_dcbaa;
+
+	pdev->device_pool = dma_pool_create("CDNSP input/output contexts", dev,
+					    CDNSP_CTX_SIZE, 64, page_size);
+	if (!pdev->device_pool)
+		goto destroy_segment_pool;
+
+
+	/* Set up the command ring to have one segments for now. */
+	pdev->cmd_ring = cdnsp_ring_alloc(pdev, 1, TYPE_COMMAND, 0, GFP_KERNEL);
+	if (!pdev->cmd_ring)
+		goto destroy_device_pool;
+
+	/* Set the address in the Command Ring Control register */
+	val_64 = cdnsp_read_64(&pdev->op_regs->cmd_ring);
+	val_64 = (val_64 & (u64)CMD_RING_RSVD_BITS) |
+		 (pdev->cmd_ring->first_seg->dma & (u64)~CMD_RING_RSVD_BITS) |
+		 pdev->cmd_ring->cycle_state;
+	cdnsp_write_64(val_64, &pdev->op_regs->cmd_ring);
+
+	val = readl(&pdev->cap_regs->db_off);
+	val &= DBOFF_MASK;
+	pdev->dba = (void __iomem *)pdev->cap_regs + val;
+
+	/* Set ir_set to interrupt register set 0 */
+	pdev->ir_set = &pdev->run_regs->ir_set[0];
+
+	/*
+	 * Event ring setup: Allocate a normal ring, but also setup
+	 * the event ring segment table (ERST).
+	 */
+	pdev->event_ring = cdnsp_ring_alloc(pdev, ERST_NUM_SEGS, TYPE_EVENT,
+					    0, GFP_KERNEL);
+	if (!pdev->event_ring)
+		goto free_cmd_ring;
+
+	ret = cdnsp_alloc_erst(pdev, pdev->event_ring, &pdev->erst);
+	if (ret)
+		goto free_event_ring;
+
+	/* Set ERST count with the number of entries in the segment table. */
+	val = readl(&pdev->ir_set->erst_size);
+	val &= ERST_SIZE_MASK;
+	val |= ERST_NUM_SEGS;
+	writel(val, &pdev->ir_set->erst_size);
+
+	/* Set the segment table base address. */
+	val_64 = cdnsp_read_64(&pdev->ir_set->erst_base);
+	val_64 &= ERST_PTR_MASK;
+	val_64 |= (pdev->erst.erst_dma_addr & (u64)~ERST_PTR_MASK);
+	cdnsp_write_64(val_64, &pdev->ir_set->erst_base);
+
+	/* Set the event ring dequeue address. */
+	cdnsp_set_event_deq(pdev);
+
+	ret = cdnsp_setup_port_arrays(pdev);
+	if (ret)
+		goto free_erst;
+
+	ret = cdnsp_alloc_priv_device(pdev);
+	if (ret) {
+		dev_err(pdev->dev,
+			"Could not allocate cdnsp_device data structures\n");
+		goto free_erst;
+	}
+
+	return 0;
+
+free_erst:
+	cdnsp_free_erst(pdev, &pdev->erst);
+free_event_ring:
+	cdnsp_ring_free(pdev, pdev->event_ring);
+free_cmd_ring:
+	cdnsp_ring_free(pdev, pdev->cmd_ring);
+destroy_device_pool:
+	dma_pool_destroy(pdev->device_pool);
+destroy_segment_pool:
+	dma_pool_destroy(pdev->segment_pool);
+release_dcbaa:
+	dma_free_coherent(dev, sizeof(*pdev->dcbaa), pdev->dcbaa,
+			  pdev->dcbaa->dma);
+
+	cdnsp_reset(pdev);
+
+	return ret;
+}
diff --git a/drivers/usb/cdns3/cdnsp-pci.c b/drivers/usb/cdns3/cdnsp-pci.c
new file mode 100644
index 000000000..a85db23fa
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-pci.c
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence PCI Glue driver.
+ *
+ * Copyright (C) 2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+
+#include "core.h"
+#include "gadget-export.h"
+
+#define PCI_BAR_HOST		0
+#define PCI_BAR_OTG		0
+#define PCI_BAR_DEV		2
+
+#define PCI_DEV_FN_HOST_DEVICE	0
+#define PCI_DEV_FN_OTG		1
+
+#define PCI_DRIVER_NAME		"cdns-pci-usbssp"
+#define PLAT_DRIVER_NAME	"cdns-usbssp"
+
+#define CDNS_VENDOR_ID		0x17cd
+#define CDNS_DEVICE_ID		0x0200
+#define CDNS_DRD_ID		0x0100
+#define CDNS_DRD_IF		(PCI_CLASS_SERIAL_USB << 8 | 0x80)
+
+static struct pci_dev *cdnsp_get_second_fun(struct pci_dev *pdev)
+{
+	/*
+	 * Gets the second function.
+	 * Platform has two function. The fist keeps resources for
+	 * Host/Device while the secon keeps resources for DRD/OTG.
+	 */
+	if (pdev->device == CDNS_DEVICE_ID)
+		return  pci_get_device(pdev->vendor, CDNS_DRD_ID, NULL);
+	else if (pdev->device == CDNS_DRD_ID)
+		return pci_get_device(pdev->vendor, CDNS_DEVICE_ID, NULL);
+
+	return NULL;
+}
+
+static int cdnsp_pci_probe(struct pci_dev *pdev,
+			   const struct pci_device_id *id)
+{
+	struct device *dev = &pdev->dev;
+	struct pci_dev *func;
+	struct resource *res;
+	struct cdns *cdnsp;
+	int ret;
+
+	/*
+	 * For GADGET/HOST PCI (devfn) function number is 0,
+	 * for OTG PCI (devfn) function number is 1.
+	 */
+	if (!id || (pdev->devfn != PCI_DEV_FN_HOST_DEVICE &&
+		    pdev->devfn != PCI_DEV_FN_OTG))
+		return -EINVAL;
+
+	func = cdnsp_get_second_fun(pdev);
+	if (!func)
+		return -EINVAL;
+
+	if (func->class == PCI_CLASS_SERIAL_USB_XHCI ||
+	    pdev->class == PCI_CLASS_SERIAL_USB_XHCI) {
+		ret = -EINVAL;
+		goto put_pci;
+	}
+
+	ret = pcim_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Enabling PCI device has failed %d\n", ret);
+		goto put_pci;
+	}
+
+	pci_set_master(pdev);
+	if (pci_is_enabled(func)) {
+		cdnsp = pci_get_drvdata(func);
+	} else {
+		cdnsp = kzalloc(sizeof(*cdnsp), GFP_KERNEL);
+		if (!cdnsp) {
+			ret = -ENOMEM;
+			goto disable_pci;
+		}
+	}
+
+	/* For GADGET device function number is 0. */
+	if (pdev->devfn == 0) {
+		resource_size_t rsrc_start, rsrc_len;
+
+		/* Function 0: host(BAR_0) + device(BAR_1).*/
+		dev_dbg(dev, "Initialize resources\n");
+		rsrc_start = pci_resource_start(pdev, PCI_BAR_DEV);
+		rsrc_len = pci_resource_len(pdev, PCI_BAR_DEV);
+		res = devm_request_mem_region(dev, rsrc_start, rsrc_len, "dev");
+		if (!res) {
+			dev_dbg(dev, "controller already in use\n");
+			ret = -EBUSY;
+			goto free_cdnsp;
+		}
+
+		cdnsp->dev_regs = devm_ioremap(dev, rsrc_start, rsrc_len);
+		if (!cdnsp->dev_regs) {
+			dev_dbg(dev, "error mapping memory\n");
+			ret = -EFAULT;
+			goto free_cdnsp;
+		}
+
+		cdnsp->dev_irq = pdev->irq;
+		dev_dbg(dev, "USBSS-DEV physical base addr: %pa\n",
+			&rsrc_start);
+
+		res = &cdnsp->xhci_res[0];
+		res->start = pci_resource_start(pdev, PCI_BAR_HOST);
+		res->end = pci_resource_end(pdev, PCI_BAR_HOST);
+		res->name = "xhci";
+		res->flags = IORESOURCE_MEM;
+		dev_dbg(dev, "USBSS-XHCI physical base addr: %pa\n",
+			&res->start);
+
+		/* Interrupt for XHCI, */
+		res = &cdnsp->xhci_res[1];
+		res->start = pdev->irq;
+		res->name = "host";
+		res->flags = IORESOURCE_IRQ;
+	} else {
+		res = &cdnsp->otg_res;
+		res->start = pci_resource_start(pdev, PCI_BAR_OTG);
+		res->end =   pci_resource_end(pdev, PCI_BAR_OTG);
+		res->name = "otg";
+		res->flags = IORESOURCE_MEM;
+		dev_dbg(dev, "CDNSP-DRD physical base addr: %pa\n",
+			&res->start);
+
+		/* Interrupt for OTG/DRD. */
+		cdnsp->otg_irq = pdev->irq;
+	}
+
+	if (pci_is_enabled(func)) {
+		cdnsp->dev = dev;
+		cdnsp->gadget_init = cdnsp_gadget_init;
+
+		ret = cdns_init(cdnsp);
+		if (ret)
+			goto free_cdnsp;
+	}
+
+	pci_set_drvdata(pdev, cdnsp);
+
+	device_wakeup_enable(&pdev->dev);
+	if (pci_dev_run_wake(pdev))
+		pm_runtime_put_noidle(&pdev->dev);
+
+	return 0;
+
+free_cdnsp:
+	if (!pci_is_enabled(func))
+		kfree(cdnsp);
+
+disable_pci:
+	pci_disable_device(pdev);
+
+put_pci:
+	pci_dev_put(func);
+
+	return ret;
+}
+
+static void cdnsp_pci_remove(struct pci_dev *pdev)
+{
+	struct cdns *cdnsp;
+	struct pci_dev *func;
+
+	func = cdnsp_get_second_fun(pdev);
+	cdnsp = (struct cdns *)pci_get_drvdata(pdev);
+
+	if (pci_dev_run_wake(pdev))
+		pm_runtime_get_noresume(&pdev->dev);
+
+	if (!pci_is_enabled(func)) {
+		kfree(cdnsp);
+		goto pci_put;
+	}
+
+	cdns_remove(cdnsp);
+
+pci_put:
+	pci_dev_put(func);
+}
+
+static int __maybe_unused cdnsp_pci_suspend(struct device *dev)
+{
+	struct cdns *cdns = dev_get_drvdata(dev);
+
+	return cdns_suspend(cdns);
+}
+
+static int __maybe_unused cdnsp_pci_resume(struct device *dev)
+{
+	struct cdns *cdns = dev_get_drvdata(dev);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&cdns->lock, flags);
+	ret = cdns_resume(cdns);
+	spin_unlock_irqrestore(&cdns->lock, flags);
+	cdns_set_active(cdns, 1);
+
+	return ret;
+}
+
+static const struct dev_pm_ops cdnsp_pci_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(cdnsp_pci_suspend, cdnsp_pci_resume)
+};
+
+static const struct pci_device_id cdnsp_pci_ids[] = {
+	{ PCI_VENDOR_ID_CDNS, CDNS_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
+	  PCI_CLASS_SERIAL_USB_DEVICE, PCI_ANY_ID },
+	{ PCI_VENDOR_ID_CDNS, CDNS_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
+	  CDNS_DRD_IF, PCI_ANY_ID },
+	{ PCI_VENDOR_ID_CDNS, CDNS_DRD_ID, PCI_ANY_ID, PCI_ANY_ID,
+	  CDNS_DRD_IF, PCI_ANY_ID },
+	{ 0, }
+};
+
+static struct pci_driver cdnsp_pci_driver = {
+	.name = "cdnsp-pci",
+	.id_table = &cdnsp_pci_ids[0],
+	.probe = cdnsp_pci_probe,
+	.remove = cdnsp_pci_remove,
+	.driver = {
+		.pm = &cdnsp_pci_pm_ops,
+	}
+};
+
+module_pci_driver(cdnsp_pci_driver);
+MODULE_DEVICE_TABLE(pci, cdnsp_pci_ids);
+
+MODULE_ALIAS("pci:cdnsp");
+MODULE_AUTHOR("Pawel Laszczak <pawell@cadence.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence CDNSP PCI driver");
diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c
new file mode 100644
index 000000000..8a2cc0405
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-ring.c
@@ -0,0 +1,2484 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence CDNSP DRD Driver.
+ *
+ * Copyright (C) 2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ * Code based on Linux XHCI driver.
+ * Origin: Copyright (C) 2008 Intel Corp
+ */
+
+/*
+ * Ring initialization rules:
+ * 1. Each segment is initialized to zero, except for link TRBs.
+ * 2. Ring cycle state = 0. This represents Producer Cycle State (PCS) or
+ *    Consumer Cycle State (CCS), depending on ring function.
+ * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment.
+ *
+ * Ring behavior rules:
+ * 1. A ring is empty if enqueue == dequeue. This means there will always be at
+ *    least one free TRB in the ring. This is useful if you want to turn that
+ *    into a link TRB and expand the ring.
+ * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a
+ *    link TRB, then load the pointer with the address in the link TRB. If the
+ *    link TRB had its toggle bit set, you may need to update the ring cycle
+ *    state (see cycle bit rules). You may have to do this multiple times
+ *    until you reach a non-link TRB.
+ * 3. A ring is full if enqueue++ (for the definition of increment above)
+ *    equals the dequeue pointer.
+ *
+ * Cycle bit rules:
+ * 1. When a consumer increments a dequeue pointer and encounters a toggle bit
+ *    in a link TRB, it must toggle the ring cycle state.
+ * 2. When a producer increments an enqueue pointer and encounters a toggle bit
+ *    in a link TRB, it must toggle the ring cycle state.
+ *
+ * Producer rules:
+ * 1. Check if ring is full before you enqueue.
+ * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing.
+ *    Update enqueue pointer between each write (which may update the ring
+ *    cycle state).
+ * 3. Notify consumer. If SW is producer, it rings the doorbell for command
+ *    and endpoint rings. If controller is the producer for the event ring,
+ *    and it generates an interrupt according to interrupt modulation rules.
+ *
+ * Consumer rules:
+ * 1. Check if TRB belongs to you. If the cycle bit == your ring cycle state,
+ *    the TRB is owned by the consumer.
+ * 2. Update dequeue pointer (which may update the ring cycle state) and
+ *    continue processing TRBs until you reach a TRB which is not owned by you.
+ * 3. Notify the producer. SW is the consumer for the event ring, and it
+ *    updates event ring dequeue pointer. Controller is the consumer for the
+ *    command and endpoint rings; it generates events on the event ring
+ *    for these.
+ */
+
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+
+#include "cdnsp-trace.h"
+#include "cdnsp-gadget.h"
+
+/*
+ * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
+ * address of the TRB.
+ */
+dma_addr_t cdnsp_trb_virt_to_dma(struct cdnsp_segment *seg,
+				 union cdnsp_trb *trb)
+{
+	unsigned long segment_offset = trb - seg->trbs;
+
+	if (trb < seg->trbs || segment_offset >= TRBS_PER_SEGMENT)
+		return 0;
+
+	return seg->dma + (segment_offset * sizeof(*trb));
+}
+
+static bool cdnsp_trb_is_noop(union cdnsp_trb *trb)
+{
+	return TRB_TYPE_NOOP_LE32(trb->generic.field[3]);
+}
+
+static bool cdnsp_trb_is_link(union cdnsp_trb *trb)
+{
+	return TRB_TYPE_LINK_LE32(trb->link.control);
+}
+
+bool cdnsp_last_trb_on_seg(struct cdnsp_segment *seg, union cdnsp_trb *trb)
+{
+	return trb == &seg->trbs[TRBS_PER_SEGMENT - 1];
+}
+
+bool cdnsp_last_trb_on_ring(struct cdnsp_ring *ring,
+			    struct cdnsp_segment *seg,
+			    union cdnsp_trb *trb)
+{
+	return cdnsp_last_trb_on_seg(seg, trb) && (seg->next == ring->first_seg);
+}
+
+static bool cdnsp_link_trb_toggles_cycle(union cdnsp_trb *trb)
+{
+	return le32_to_cpu(trb->link.control) & LINK_TOGGLE;
+}
+
+static void cdnsp_trb_to_noop(union cdnsp_trb *trb, u32 noop_type)
+{
+	if (cdnsp_trb_is_link(trb)) {
+		/* Unchain chained link TRBs. */
+		trb->link.control &= cpu_to_le32(~TRB_CHAIN);
+	} else {
+		trb->generic.field[0] = 0;
+		trb->generic.field[1] = 0;
+		trb->generic.field[2] = 0;
+		/* Preserve only the cycle bit of this TRB. */
+		trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE);
+		trb->generic.field[3] |= cpu_to_le32(TRB_TYPE(noop_type));
+	}
+}
+
+/*
+ * Updates trb to point to the next TRB in the ring, and updates seg if the next
+ * TRB is in a new segment. This does not skip over link TRBs, and it does not
+ * effect the ring dequeue or enqueue pointers.
+ */
+static void cdnsp_next_trb(struct cdnsp_device *pdev,
+			   struct cdnsp_ring *ring,
+			   struct cdnsp_segment **seg,
+			   union cdnsp_trb **trb)
+{
+	if (cdnsp_trb_is_link(*trb)) {
+		*seg = (*seg)->next;
+		*trb = ((*seg)->trbs);
+	} else {
+		(*trb)++;
+	}
+}
+
+/*
+ * See Cycle bit rules. SW is the consumer for the event ring only.
+ * Don't make a ring full of link TRBs. That would be dumb and this would loop.
+ */
+void cdnsp_inc_deq(struct cdnsp_device *pdev, struct cdnsp_ring *ring)
+{
+	/* event ring doesn't have link trbs, check for last trb. */
+	if (ring->type == TYPE_EVENT) {
+		if (!cdnsp_last_trb_on_seg(ring->deq_seg, ring->dequeue)) {
+			ring->dequeue++;
+			goto out;
+		}
+
+		if (cdnsp_last_trb_on_ring(ring, ring->deq_seg, ring->dequeue))
+			ring->cycle_state ^= 1;
+
+		ring->deq_seg = ring->deq_seg->next;
+		ring->dequeue = ring->deq_seg->trbs;
+		goto out;
+	}
+
+	/* All other rings have link trbs. */
+	if (!cdnsp_trb_is_link(ring->dequeue)) {
+		ring->dequeue++;
+		ring->num_trbs_free++;
+	}
+	while (cdnsp_trb_is_link(ring->dequeue)) {
+		ring->deq_seg = ring->deq_seg->next;
+		ring->dequeue = ring->deq_seg->trbs;
+	}
+out:
+	trace_cdnsp_inc_deq(ring);
+}
+
+/*
+ * See Cycle bit rules. SW is the consumer for the event ring only.
+ * Don't make a ring full of link TRBs. That would be dumb and this would loop.
+ *
+ * If we've just enqueued a TRB that is in the middle of a TD (meaning the
+ * chain bit is set), then set the chain bit in all the following link TRBs.
+ * If we've enqueued the last TRB in a TD, make sure the following link TRBs
+ * have their chain bit cleared (so that each Link TRB is a separate TD).
+ *
+ * @more_trbs_coming:	Will you enqueue more TRBs before ringing the doorbell.
+ */
+static void cdnsp_inc_enq(struct cdnsp_device *pdev,
+			  struct cdnsp_ring *ring,
+			  bool more_trbs_coming)
+{
+	union cdnsp_trb *next;
+	u32 chain;
+
+	chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN;
+
+	/* If this is not event ring, there is one less usable TRB. */
+	if (!cdnsp_trb_is_link(ring->enqueue))
+		ring->num_trbs_free--;
+	next = ++(ring->enqueue);
+
+	/* Update the dequeue pointer further if that was a link TRB */
+	while (cdnsp_trb_is_link(next)) {
+		/*
+		 * If the caller doesn't plan on enqueuing more TDs before
+		 * ringing the doorbell, then we don't want to give the link TRB
+		 * to the hardware just yet. We'll give the link TRB back in
+		 * cdnsp_prepare_ring() just before we enqueue the TD at the
+		 * top of the ring.
+		 */
+		if (!chain && !more_trbs_coming)
+			break;
+
+		next->link.control &= cpu_to_le32(~TRB_CHAIN);
+		next->link.control |= cpu_to_le32(chain);
+
+		/* Give this link TRB to the hardware */
+		wmb();
+		next->link.control ^= cpu_to_le32(TRB_CYCLE);
+
+		/* Toggle the cycle bit after the last ring segment. */
+		if (cdnsp_link_trb_toggles_cycle(next))
+			ring->cycle_state ^= 1;
+
+		ring->enq_seg = ring->enq_seg->next;
+		ring->enqueue = ring->enq_seg->trbs;
+		next = ring->enqueue;
+	}
+
+	trace_cdnsp_inc_enq(ring);
+}
+
+/*
+ * Check to see if there's room to enqueue num_trbs on the ring and make sure
+ * enqueue pointer will not advance into dequeue segment.
+ */
+static bool cdnsp_room_on_ring(struct cdnsp_device *pdev,
+			       struct cdnsp_ring *ring,
+			       unsigned int num_trbs)
+{
+	int num_trbs_in_deq_seg;
+
+	if (ring->num_trbs_free < num_trbs)
+		return false;
+
+	if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) {
+		num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs;
+
+		if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg)
+			return false;
+	}
+
+	return true;
+}
+
+/*
+ * Workaround for L1: controller has issue with resuming from L1 after
+ * setting doorbell for endpoint during L1 state. This function forces
+ * resume signal in such case.
+ */
+static void cdnsp_force_l0_go(struct cdnsp_device *pdev)
+{
+	if (pdev->active_port == &pdev->usb2_port && pdev->gadget.lpm_capable)
+		cdnsp_set_link_state(pdev, &pdev->active_port->regs->portsc, XDEV_U0);
+}
+
+/* Ring the doorbell after placing a command on the ring. */
+void cdnsp_ring_cmd_db(struct cdnsp_device *pdev)
+{
+	writel(DB_VALUE_CMD, &pdev->dba->cmd_db);
+}
+
+/*
+ * Ring the doorbell after placing a transfer on the ring.
+ * Returns true if doorbell was set, otherwise false.
+ */
+static bool cdnsp_ring_ep_doorbell(struct cdnsp_device *pdev,
+				   struct cdnsp_ep *pep,
+				   unsigned int stream_id)
+{
+	__le32 __iomem *reg_addr = &pdev->dba->ep_db;
+	unsigned int ep_state = pep->ep_state;
+	unsigned int db_value;
+
+	/*
+	 * Don't ring the doorbell for this endpoint if endpoint is halted or
+	 * disabled.
+	 */
+	if (ep_state & EP_HALTED || !(ep_state & EP_ENABLED))
+		return false;
+
+	/* For stream capable endpoints driver can ring doorbell only twice. */
+	if (pep->ep_state & EP_HAS_STREAMS) {
+		if (pep->stream_info.drbls_count >= 2)
+			return false;
+
+		pep->stream_info.drbls_count++;
+	}
+
+	pep->ep_state &= ~EP_STOPPED;
+
+	if (pep->idx == 0 && pdev->ep0_stage == CDNSP_DATA_STAGE &&
+	    !pdev->ep0_expect_in)
+		db_value = DB_VALUE_EP0_OUT(pep->idx, stream_id);
+	else
+		db_value = DB_VALUE(pep->idx, stream_id);
+
+	trace_cdnsp_tr_drbl(pep, stream_id);
+
+	writel(db_value, reg_addr);
+
+	cdnsp_force_l0_go(pdev);
+
+	/* Doorbell was set. */
+	return true;
+}
+
+/*
+ * Get the right ring for the given pep and stream_id.
+ * If the endpoint supports streams, boundary check the USB request's stream ID.
+ * If the endpoint doesn't support streams, return the singular endpoint ring.
+ */
+static struct cdnsp_ring *cdnsp_get_transfer_ring(struct cdnsp_device *pdev,
+						  struct cdnsp_ep *pep,
+						  unsigned int stream_id)
+{
+	if (!(pep->ep_state & EP_HAS_STREAMS))
+		return pep->ring;
+
+	if (stream_id == 0 || stream_id >= pep->stream_info.num_streams) {
+		dev_err(pdev->dev, "ERR: %s ring doesn't exist for SID: %d.\n",
+			pep->name, stream_id);
+		return NULL;
+	}
+
+	return pep->stream_info.stream_rings[stream_id];
+}
+
+static struct cdnsp_ring *
+	cdnsp_request_to_transfer_ring(struct cdnsp_device *pdev,
+				       struct cdnsp_request *preq)
+{
+	return cdnsp_get_transfer_ring(pdev, preq->pep,
+				       preq->request.stream_id);
+}
+
+/* Ring the doorbell for any rings with pending requests. */
+void cdnsp_ring_doorbell_for_active_rings(struct cdnsp_device *pdev,
+					  struct cdnsp_ep *pep)
+{
+	struct cdnsp_stream_info *stream_info;
+	unsigned int stream_id;
+	int ret;
+
+	if (pep->ep_state & EP_DIS_IN_RROGRESS)
+		return;
+
+	/* A ring has pending Request if its TD list is not empty. */
+	if (!(pep->ep_state & EP_HAS_STREAMS) && pep->number) {
+		if (pep->ring && !list_empty(&pep->ring->td_list))
+			cdnsp_ring_ep_doorbell(pdev, pep, 0);
+		return;
+	}
+
+	stream_info = &pep->stream_info;
+
+	for (stream_id = 1; stream_id < stream_info->num_streams; stream_id++) {
+		struct cdnsp_td *td, *td_temp;
+		struct cdnsp_ring *ep_ring;
+
+		if (stream_info->drbls_count >= 2)
+			return;
+
+		ep_ring = cdnsp_get_transfer_ring(pdev, pep, stream_id);
+		if (!ep_ring)
+			continue;
+
+		if (!ep_ring->stream_active || ep_ring->stream_rejected)
+			continue;
+
+		list_for_each_entry_safe(td, td_temp, &ep_ring->td_list,
+					 td_list) {
+			if (td->drbl)
+				continue;
+
+			ret = cdnsp_ring_ep_doorbell(pdev, pep, stream_id);
+			if (ret)
+				td->drbl = 1;
+		}
+	}
+}
+
+/*
+ * Get the hw dequeue pointer controller stopped on, either directly from the
+ * endpoint context, or if streams are in use from the stream context.
+ * The returned hw_dequeue contains the lowest four bits with cycle state
+ * and possible stream context type.
+ */
+static u64 cdnsp_get_hw_deq(struct cdnsp_device *pdev,
+			    unsigned int ep_index,
+			    unsigned int stream_id)
+{
+	struct cdnsp_stream_ctx *st_ctx;
+	struct cdnsp_ep *pep;
+
+	pep = &pdev->eps[stream_id];
+
+	if (pep->ep_state & EP_HAS_STREAMS) {
+		st_ctx = &pep->stream_info.stream_ctx_array[stream_id];
+		return le64_to_cpu(st_ctx->stream_ring);
+	}
+
+	return le64_to_cpu(pep->out_ctx->deq);
+}
+
+/*
+ * Move the controller endpoint ring dequeue pointer past cur_td.
+ * Record the new state of the controller endpoint ring dequeue segment,
+ * dequeue pointer, and new consumer cycle state in state.
+ * Update internal representation of the ring's dequeue pointer.
+ *
+ * We do this in three jumps:
+ *  - First we update our new ring state to be the same as when the
+ *    controller stopped.
+ *  - Then we traverse the ring to find the segment that contains
+ *    the last TRB in the TD. We toggle the controller new cycle state
+ *    when we pass any link TRBs with the toggle cycle bit set.
+ *  - Finally we move the dequeue state one TRB further, toggling the cycle bit
+ *    if we've moved it past a link TRB with the toggle cycle bit set.
+ */
+static void cdnsp_find_new_dequeue_state(struct cdnsp_device *pdev,
+					 struct cdnsp_ep *pep,
+					 unsigned int stream_id,
+					 struct cdnsp_td *cur_td,
+					 struct cdnsp_dequeue_state *state)
+{
+	bool td_last_trb_found = false;
+	struct cdnsp_segment *new_seg;
+	struct cdnsp_ring *ep_ring;
+	union cdnsp_trb *new_deq;
+	bool cycle_found = false;
+	u64 hw_dequeue;
+
+	ep_ring = cdnsp_get_transfer_ring(pdev, pep, stream_id);
+	if (!ep_ring)
+		return;
+
+	/*
+	 * Dig out the cycle state saved by the controller during the
+	 * stop endpoint command.
+	 */
+	hw_dequeue = cdnsp_get_hw_deq(pdev, pep->idx, stream_id);
+	new_seg = ep_ring->deq_seg;
+	new_deq = ep_ring->dequeue;
+	state->new_cycle_state = hw_dequeue & 0x1;
+	state->stream_id = stream_id;
+
+	/*
+	 * We want to find the pointer, segment and cycle state of the new trb
+	 * (the one after current TD's last_trb). We know the cycle state at
+	 * hw_dequeue, so walk the ring until both hw_dequeue and last_trb are
+	 * found.
+	 */
+	do {
+		if (!cycle_found && cdnsp_trb_virt_to_dma(new_seg, new_deq)
+		    == (dma_addr_t)(hw_dequeue & ~0xf)) {
+			cycle_found = true;
+
+			if (td_last_trb_found)
+				break;
+		}
+
+		if (new_deq == cur_td->last_trb)
+			td_last_trb_found = true;
+
+		if (cycle_found && cdnsp_trb_is_link(new_deq) &&
+		    cdnsp_link_trb_toggles_cycle(new_deq))
+			state->new_cycle_state ^= 0x1;
+
+		cdnsp_next_trb(pdev, ep_ring, &new_seg, &new_deq);
+
+		/* Search wrapped around, bail out. */
+		if (new_deq == pep->ring->dequeue) {
+			dev_err(pdev->dev,
+				"Error: Failed finding new dequeue state\n");
+			state->new_deq_seg = NULL;
+			state->new_deq_ptr = NULL;
+			return;
+		}
+
+	} while (!cycle_found || !td_last_trb_found);
+
+	state->new_deq_seg = new_seg;
+	state->new_deq_ptr = new_deq;
+
+	trace_cdnsp_new_deq_state(state);
+}
+
+/*
+ * flip_cycle means flip the cycle bit of all but the first and last TRB.
+ * (The last TRB actually points to the ring enqueue pointer, which is not part
+ * of this TD.) This is used to remove partially enqueued isoc TDs from a ring.
+ */
+static void cdnsp_td_to_noop(struct cdnsp_device *pdev,
+			     struct cdnsp_ring *ep_ring,
+			     struct cdnsp_td *td,
+			     bool flip_cycle)
+{
+	struct cdnsp_segment *seg = td->start_seg;
+	union cdnsp_trb *trb = td->first_trb;
+
+	while (1) {
+		cdnsp_trb_to_noop(trb, TRB_TR_NOOP);
+
+		/* flip cycle if asked to */
+		if (flip_cycle && trb != td->first_trb && trb != td->last_trb)
+			trb->generic.field[3] ^= cpu_to_le32(TRB_CYCLE);
+
+		if (trb == td->last_trb)
+			break;
+
+		cdnsp_next_trb(pdev, ep_ring, &seg, &trb);
+	}
+}
+
+/*
+ * This TD is defined by the TRBs starting at start_trb in start_seg and ending
+ * at end_trb, which may be in another segment. If the suspect DMA address is a
+ * TRB in this TD, this function returns that TRB's segment. Otherwise it
+ * returns 0.
+ */
+static struct cdnsp_segment *cdnsp_trb_in_td(struct cdnsp_device *pdev,
+					     struct cdnsp_segment *start_seg,
+					     union cdnsp_trb *start_trb,
+					     union cdnsp_trb *end_trb,
+					     dma_addr_t suspect_dma)
+{
+	struct cdnsp_segment *cur_seg;
+	union cdnsp_trb *temp_trb;
+	dma_addr_t end_seg_dma;
+	dma_addr_t end_trb_dma;
+	dma_addr_t start_dma;
+
+	start_dma = cdnsp_trb_virt_to_dma(start_seg, start_trb);
+	cur_seg = start_seg;
+
+	do {
+		if (start_dma == 0)
+			return NULL;
+
+		temp_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1];
+		/* We may get an event for a Link TRB in the middle of a TD */
+		end_seg_dma = cdnsp_trb_virt_to_dma(cur_seg, temp_trb);
+		/* If the end TRB isn't in this segment, this is set to 0 */
+		end_trb_dma = cdnsp_trb_virt_to_dma(cur_seg, end_trb);
+
+		trace_cdnsp_looking_trb_in_td(suspect_dma, start_dma,
+					      end_trb_dma, cur_seg->dma,
+					      end_seg_dma);
+
+		if (end_trb_dma > 0) {
+			/*
+			 * The end TRB is in this segment, so suspect should
+			 * be here
+			 */
+			if (start_dma <= end_trb_dma) {
+				if (suspect_dma >= start_dma &&
+				    suspect_dma <= end_trb_dma) {
+					return cur_seg;
+				}
+			} else {
+				/*
+				 * Case for one segment with a
+				 * TD wrapped around to the top
+				 */
+				if ((suspect_dma >= start_dma &&
+				     suspect_dma <= end_seg_dma) ||
+				    (suspect_dma >= cur_seg->dma &&
+				     suspect_dma <= end_trb_dma)) {
+					return cur_seg;
+				}
+			}
+
+			return NULL;
+		}
+
+		/* Might still be somewhere in this segment */
+		if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
+			return cur_seg;
+
+		cur_seg = cur_seg->next;
+		start_dma = cdnsp_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
+	} while (cur_seg != start_seg);
+
+	return NULL;
+}
+
+static void cdnsp_unmap_td_bounce_buffer(struct cdnsp_device *pdev,
+					 struct cdnsp_ring *ring,
+					 struct cdnsp_td *td)
+{
+	struct cdnsp_segment *seg = td->bounce_seg;
+	struct cdnsp_request *preq;
+	size_t len;
+
+	if (!seg)
+		return;
+
+	preq = td->preq;
+
+	trace_cdnsp_bounce_unmap(td->preq, seg->bounce_len, seg->bounce_offs,
+				 seg->bounce_dma, 0);
+
+	if (!preq->direction) {
+		dma_unmap_single(pdev->dev, seg->bounce_dma,
+				 ring->bounce_buf_len,  DMA_TO_DEVICE);
+		return;
+	}
+
+	dma_unmap_single(pdev->dev, seg->bounce_dma, ring->bounce_buf_len,
+			 DMA_FROM_DEVICE);
+
+	/* For in transfers we need to copy the data from bounce to sg */
+	len = sg_pcopy_from_buffer(preq->request.sg, preq->request.num_sgs,
+				   seg->bounce_buf, seg->bounce_len,
+				   seg->bounce_offs);
+	if (len != seg->bounce_len)
+		dev_warn(pdev->dev, "WARN Wrong bounce buffer read length: %zu != %d\n",
+			 len, seg->bounce_len);
+
+	seg->bounce_len = 0;
+	seg->bounce_offs = 0;
+}
+
+static int cdnsp_cmd_set_deq(struct cdnsp_device *pdev,
+			     struct cdnsp_ep *pep,
+			     struct cdnsp_dequeue_state *deq_state)
+{
+	struct cdnsp_ring *ep_ring;
+	int ret;
+
+	if (!deq_state->new_deq_ptr || !deq_state->new_deq_seg) {
+		cdnsp_ring_doorbell_for_active_rings(pdev, pep);
+		return 0;
+	}
+
+	cdnsp_queue_new_dequeue_state(pdev, pep, deq_state);
+	cdnsp_ring_cmd_db(pdev);
+	ret = cdnsp_wait_for_cmd_compl(pdev);
+
+	trace_cdnsp_handle_cmd_set_deq(cdnsp_get_slot_ctx(&pdev->out_ctx));
+	trace_cdnsp_handle_cmd_set_deq_ep(pep->out_ctx);
+
+	/*
+	 * Update the ring's dequeue segment and dequeue pointer
+	 * to reflect the new position.
+	 */
+	ep_ring = cdnsp_get_transfer_ring(pdev, pep, deq_state->stream_id);
+
+	if (cdnsp_trb_is_link(ep_ring->dequeue)) {
+		ep_ring->deq_seg = ep_ring->deq_seg->next;
+		ep_ring->dequeue = ep_ring->deq_seg->trbs;
+	}
+
+	while (ep_ring->dequeue != deq_state->new_deq_ptr) {
+		ep_ring->num_trbs_free++;
+		ep_ring->dequeue++;
+
+		if (cdnsp_trb_is_link(ep_ring->dequeue)) {
+			if (ep_ring->dequeue == deq_state->new_deq_ptr)
+				break;
+
+			ep_ring->deq_seg = ep_ring->deq_seg->next;
+			ep_ring->dequeue = ep_ring->deq_seg->trbs;
+		}
+	}
+
+	/*
+	 * Probably there was TIMEOUT during handling Set Dequeue Pointer
+	 * command. It's critical error and controller will be stopped.
+	 */
+	if (ret)
+		return -ESHUTDOWN;
+
+	/* Restart any rings with pending requests */
+	cdnsp_ring_doorbell_for_active_rings(pdev, pep);
+
+	return 0;
+}
+
+int cdnsp_remove_request(struct cdnsp_device *pdev,
+			 struct cdnsp_request *preq,
+			 struct cdnsp_ep *pep)
+{
+	struct cdnsp_dequeue_state deq_state;
+	struct cdnsp_td *cur_td = NULL;
+	struct cdnsp_ring *ep_ring;
+	struct cdnsp_segment *seg;
+	int status = -ECONNRESET;
+	int ret = 0;
+	u64 hw_deq;
+
+	memset(&deq_state, 0, sizeof(deq_state));
+
+	trace_cdnsp_remove_request(pep->out_ctx);
+	trace_cdnsp_remove_request_td(preq);
+
+	cur_td = &preq->td;
+	ep_ring = cdnsp_request_to_transfer_ring(pdev, preq);
+
+	/*
+	 * If we stopped on the TD we need to cancel, then we have to
+	 * move the controller endpoint ring dequeue pointer past
+	 * this TD.
+	 */
+	hw_deq = cdnsp_get_hw_deq(pdev, pep->idx, preq->request.stream_id);
+	hw_deq &= ~0xf;
+
+	seg = cdnsp_trb_in_td(pdev, cur_td->start_seg, cur_td->first_trb,
+			      cur_td->last_trb, hw_deq);
+
+	if (seg && (pep->ep_state & EP_ENABLED))
+		cdnsp_find_new_dequeue_state(pdev, pep, preq->request.stream_id,
+					     cur_td, &deq_state);
+	else
+		cdnsp_td_to_noop(pdev, ep_ring, cur_td, false);
+
+	/*
+	 * The event handler won't see a completion for this TD anymore,
+	 * so remove it from the endpoint ring's TD list.
+	 */
+	list_del_init(&cur_td->td_list);
+	ep_ring->num_tds--;
+	pep->stream_info.td_count--;
+
+	/*
+	 * During disconnecting all endpoint will be disabled so we don't
+	 * have to worry about updating dequeue pointer.
+	 */
+	if (pdev->cdnsp_state & CDNSP_STATE_DISCONNECT_PENDING) {
+		status = -ESHUTDOWN;
+		ret = cdnsp_cmd_set_deq(pdev, pep, &deq_state);
+	}
+
+	cdnsp_unmap_td_bounce_buffer(pdev, ep_ring, cur_td);
+	cdnsp_gadget_giveback(pep, cur_td->preq, status);
+
+	return ret;
+}
+
+static int cdnsp_update_port_id(struct cdnsp_device *pdev, u32 port_id)
+{
+	struct cdnsp_port *port = pdev->active_port;
+	u8 old_port = 0;
+
+	if (port && port->port_num == port_id)
+		return 0;
+
+	if (port)
+		old_port = port->port_num;
+
+	if (port_id == pdev->usb2_port.port_num) {
+		port = &pdev->usb2_port;
+	} else if (port_id == pdev->usb3_port.port_num) {
+		port  = &pdev->usb3_port;
+	} else {
+		dev_err(pdev->dev, "Port event with invalid port ID %d\n",
+			port_id);
+		return -EINVAL;
+	}
+
+	if (port_id != old_port) {
+		cdnsp_disable_slot(pdev);
+		pdev->active_port = port;
+		cdnsp_enable_slot(pdev);
+	}
+
+	if (port_id == pdev->usb2_port.port_num)
+		cdnsp_set_usb2_hardware_lpm(pdev, NULL, 1);
+	else
+		writel(PORT_U1_TIMEOUT(1) | PORT_U2_TIMEOUT(1),
+		       &pdev->usb3_port.regs->portpmsc);
+
+	return 0;
+}
+
+static void cdnsp_handle_port_status(struct cdnsp_device *pdev,
+				     union cdnsp_trb *event)
+{
+	struct cdnsp_port_regs __iomem *port_regs;
+	u32 portsc, cmd_regs;
+	bool port2 = false;
+	u32 link_state;
+	u32 port_id;
+
+	/* Port status change events always have a successful completion code */
+	if (GET_COMP_CODE(le32_to_cpu(event->generic.field[2])) != COMP_SUCCESS)
+		dev_err(pdev->dev, "ERR: incorrect PSC event\n");
+
+	port_id = GET_PORT_ID(le32_to_cpu(event->generic.field[0]));
+
+	if (cdnsp_update_port_id(pdev, port_id))
+		goto cleanup;
+
+	port_regs = pdev->active_port->regs;
+
+	if (port_id == pdev->usb2_port.port_num)
+		port2 = true;
+
+new_event:
+	portsc = readl(&port_regs->portsc);
+	writel(cdnsp_port_state_to_neutral(portsc) |
+	       (portsc & PORT_CHANGE_BITS), &port_regs->portsc);
+
+	trace_cdnsp_handle_port_status(pdev->active_port->port_num, portsc);
+
+	pdev->gadget.speed = cdnsp_port_speed(portsc);
+	link_state = portsc & PORT_PLS_MASK;
+
+	/* Port Link State change detected. */
+	if ((portsc & PORT_PLC)) {
+		if (!(pdev->cdnsp_state & CDNSP_WAKEUP_PENDING)  &&
+		    link_state == XDEV_RESUME) {
+			cmd_regs = readl(&pdev->op_regs->command);
+			if (!(cmd_regs & CMD_R_S))
+				goto cleanup;
+
+			if (DEV_SUPERSPEED_ANY(portsc)) {
+				cdnsp_set_link_state(pdev, &port_regs->portsc,
+						     XDEV_U0);
+
+				cdnsp_resume_gadget(pdev);
+			}
+		}
+
+		if ((pdev->cdnsp_state & CDNSP_WAKEUP_PENDING) &&
+		    link_state == XDEV_U0) {
+			pdev->cdnsp_state &= ~CDNSP_WAKEUP_PENDING;
+
+			cdnsp_force_header_wakeup(pdev, 1);
+			cdnsp_ring_cmd_db(pdev);
+			cdnsp_wait_for_cmd_compl(pdev);
+		}
+
+		if (link_state == XDEV_U0 && pdev->link_state == XDEV_U3 &&
+		    !DEV_SUPERSPEED_ANY(portsc))
+			cdnsp_resume_gadget(pdev);
+
+		if (link_state == XDEV_U3 &&  pdev->link_state != XDEV_U3)
+			cdnsp_suspend_gadget(pdev);
+
+		pdev->link_state = link_state;
+	}
+
+	if (portsc & PORT_CSC) {
+		/* Detach device. */
+		if (pdev->gadget.connected && !(portsc & PORT_CONNECT))
+			cdnsp_disconnect_gadget(pdev);
+
+		/* Attach device. */
+		if (portsc & PORT_CONNECT) {
+			if (!port2)
+				cdnsp_irq_reset(pdev);
+
+			usb_gadget_set_state(&pdev->gadget, USB_STATE_ATTACHED);
+		}
+	}
+
+	/* Port reset. */
+	if ((portsc & (PORT_RC | PORT_WRC)) && (portsc & PORT_CONNECT)) {
+		cdnsp_irq_reset(pdev);
+		pdev->u1_allowed = 0;
+		pdev->u2_allowed = 0;
+		pdev->may_wakeup = 0;
+	}
+
+	if (portsc & PORT_CEC)
+		dev_err(pdev->dev, "Port Over Current detected\n");
+
+	if (portsc & PORT_CEC)
+		dev_err(pdev->dev, "Port Configure Error detected\n");
+
+	if (readl(&port_regs->portsc) & PORT_CHANGE_BITS)
+		goto new_event;
+
+cleanup:
+	cdnsp_inc_deq(pdev, pdev->event_ring);
+}
+
+static void cdnsp_td_cleanup(struct cdnsp_device *pdev,
+			     struct cdnsp_td *td,
+			     struct cdnsp_ring *ep_ring,
+			     int *status)
+{
+	struct cdnsp_request *preq = td->preq;
+
+	/* if a bounce buffer was used to align this td then unmap it */
+	cdnsp_unmap_td_bounce_buffer(pdev, ep_ring, td);
+
+	/*
+	 * If the controller said we transferred more data than the buffer
+	 * length, Play it safe and say we didn't transfer anything.
+	 */
+	if (preq->request.actual > preq->request.length) {
+		preq->request.actual = 0;
+		*status = 0;
+	}
+
+	list_del_init(&td->td_list);
+	ep_ring->num_tds--;
+	preq->pep->stream_info.td_count--;
+
+	cdnsp_gadget_giveback(preq->pep, preq, *status);
+}
+
+static void cdnsp_finish_td(struct cdnsp_device *pdev,
+			    struct cdnsp_td *td,
+			    struct cdnsp_transfer_event *event,
+			    struct cdnsp_ep *ep,
+			    int *status)
+{
+	struct cdnsp_ring *ep_ring;
+	u32 trb_comp_code;
+
+	ep_ring = cdnsp_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
+	trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
+
+	if (trb_comp_code == COMP_STOPPED_LENGTH_INVALID ||
+	    trb_comp_code == COMP_STOPPED ||
+	    trb_comp_code == COMP_STOPPED_SHORT_PACKET) {
+		/*
+		 * The Endpoint Stop Command completion will take care of any
+		 * stopped TDs. A stopped TD may be restarted, so don't update
+		 * the ring dequeue pointer or take this TD off any lists yet.
+		 */
+		return;
+	}
+
+	/* Update ring dequeue pointer */
+	while (ep_ring->dequeue != td->last_trb)
+		cdnsp_inc_deq(pdev, ep_ring);
+
+	cdnsp_inc_deq(pdev, ep_ring);
+
+	cdnsp_td_cleanup(pdev, td, ep_ring, status);
+}
+
+/* sum trb lengths from ring dequeue up to stop_trb, _excluding_ stop_trb */
+static int cdnsp_sum_trb_lengths(struct cdnsp_device *pdev,
+				 struct cdnsp_ring *ring,
+				 union cdnsp_trb *stop_trb)
+{
+	struct cdnsp_segment *seg = ring->deq_seg;
+	union cdnsp_trb *trb = ring->dequeue;
+	u32 sum;
+
+	for (sum = 0; trb != stop_trb; cdnsp_next_trb(pdev, ring, &seg, &trb)) {
+		if (!cdnsp_trb_is_noop(trb) && !cdnsp_trb_is_link(trb))
+			sum += TRB_LEN(le32_to_cpu(trb->generic.field[2]));
+	}
+	return sum;
+}
+
+static int cdnsp_giveback_first_trb(struct cdnsp_device *pdev,
+				    struct cdnsp_ep *pep,
+				    unsigned int stream_id,
+				    int start_cycle,
+				    struct cdnsp_generic_trb *start_trb)
+{
+	/*
+	 * Pass all the TRBs to the hardware at once and make sure this write
+	 * isn't reordered.
+	 */
+	wmb();
+
+	if (start_cycle)
+		start_trb->field[3] |= cpu_to_le32(start_cycle);
+	else
+		start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
+
+	if ((pep->ep_state & EP_HAS_STREAMS) &&
+	    !pep->stream_info.first_prime_det) {
+		trace_cdnsp_wait_for_prime(pep, stream_id);
+		return 0;
+	}
+
+	return cdnsp_ring_ep_doorbell(pdev, pep, stream_id);
+}
+
+/*
+ * Process control tds, update USB request status and actual_length.
+ */
+static void cdnsp_process_ctrl_td(struct cdnsp_device *pdev,
+				  struct cdnsp_td *td,
+				  union cdnsp_trb *event_trb,
+				  struct cdnsp_transfer_event *event,
+				  struct cdnsp_ep *pep,
+				  int *status)
+{
+	struct cdnsp_ring *ep_ring;
+	u32 remaining;
+	u32 trb_type;
+
+	trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(event_trb->generic.field[3]));
+	ep_ring = cdnsp_dma_to_transfer_ring(pep, le64_to_cpu(event->buffer));
+	remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
+
+	/*
+	 * if on data stage then update the actual_length of the USB
+	 * request and flag it as set, so it won't be overwritten in the event
+	 * for the last TRB.
+	 */
+	if (trb_type == TRB_DATA) {
+		td->request_length_set = true;
+		td->preq->request.actual = td->preq->request.length - remaining;
+	}
+
+	/* at status stage */
+	if (!td->request_length_set)
+		td->preq->request.actual = td->preq->request.length;
+
+	if (pdev->ep0_stage == CDNSP_DATA_STAGE && pep->number == 0 &&
+	    pdev->three_stage_setup) {
+		td = list_entry(ep_ring->td_list.next, struct cdnsp_td,
+				td_list);
+		pdev->ep0_stage = CDNSP_STATUS_STAGE;
+
+		cdnsp_giveback_first_trb(pdev, pep, 0, ep_ring->cycle_state,
+					 &td->last_trb->generic);
+		return;
+	}
+
+	*status = 0;
+
+	cdnsp_finish_td(pdev, td, event, pep, status);
+}
+
+/*
+ * Process isochronous tds, update usb request status and actual_length.
+ */
+static void cdnsp_process_isoc_td(struct cdnsp_device *pdev,
+				  struct cdnsp_td *td,
+				  union cdnsp_trb *ep_trb,
+				  struct cdnsp_transfer_event *event,
+				  struct cdnsp_ep *pep,
+				  int status)
+{
+	struct cdnsp_request *preq = td->preq;
+	u32 remaining, requested, ep_trb_len;
+	bool sum_trbs_for_length = false;
+	struct cdnsp_ring *ep_ring;
+	u32 trb_comp_code;
+	u32 td_length;
+
+	ep_ring = cdnsp_dma_to_transfer_ring(pep, le64_to_cpu(event->buffer));
+	trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
+	remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
+	ep_trb_len = TRB_LEN(le32_to_cpu(ep_trb->generic.field[2]));
+
+	requested = preq->request.length;
+
+	/* handle completion code */
+	switch (trb_comp_code) {
+	case COMP_SUCCESS:
+		preq->request.status = 0;
+		break;
+	case COMP_SHORT_PACKET:
+		preq->request.status = 0;
+		sum_trbs_for_length = true;
+		break;
+	case COMP_ISOCH_BUFFER_OVERRUN:
+	case COMP_BABBLE_DETECTED_ERROR:
+		preq->request.status = -EOVERFLOW;
+		break;
+	case COMP_STOPPED:
+		sum_trbs_for_length = true;
+		break;
+	case COMP_STOPPED_SHORT_PACKET:
+		/* field normally containing residue now contains transferred */
+		preq->request.status  = 0;
+		requested = remaining;
+		break;
+	case COMP_STOPPED_LENGTH_INVALID:
+		requested = 0;
+		remaining = 0;
+		break;
+	default:
+		sum_trbs_for_length = true;
+		preq->request.status = -1;
+		break;
+	}
+
+	if (sum_trbs_for_length) {
+		td_length = cdnsp_sum_trb_lengths(pdev, ep_ring, ep_trb);
+		td_length += ep_trb_len - remaining;
+	} else {
+		td_length = requested;
+	}
+
+	td->preq->request.actual += td_length;
+
+	cdnsp_finish_td(pdev, td, event, pep, &status);
+}
+
+static void cdnsp_skip_isoc_td(struct cdnsp_device *pdev,
+			       struct cdnsp_td *td,
+			       struct cdnsp_transfer_event *event,
+			       struct cdnsp_ep *pep,
+			       int status)
+{
+	struct cdnsp_ring *ep_ring;
+
+	ep_ring = cdnsp_dma_to_transfer_ring(pep, le64_to_cpu(event->buffer));
+	td->preq->request.status = -EXDEV;
+	td->preq->request.actual = 0;
+
+	/* Update ring dequeue pointer */
+	while (ep_ring->dequeue != td->last_trb)
+		cdnsp_inc_deq(pdev, ep_ring);
+
+	cdnsp_inc_deq(pdev, ep_ring);
+
+	cdnsp_td_cleanup(pdev, td, ep_ring, &status);
+}
+
+/*
+ * Process bulk and interrupt tds, update usb request status and actual_length.
+ */
+static void cdnsp_process_bulk_intr_td(struct cdnsp_device *pdev,
+				       struct cdnsp_td *td,
+				       union cdnsp_trb *ep_trb,
+				       struct cdnsp_transfer_event *event,
+				       struct cdnsp_ep *ep,
+				       int *status)
+{
+	u32 remaining, requested, ep_trb_len;
+	struct cdnsp_ring *ep_ring;
+	u32 trb_comp_code;
+
+	ep_ring = cdnsp_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
+	trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
+	remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
+	ep_trb_len = TRB_LEN(le32_to_cpu(ep_trb->generic.field[2]));
+	requested = td->preq->request.length;
+
+	switch (trb_comp_code) {
+	case COMP_SUCCESS:
+	case COMP_SHORT_PACKET:
+		*status = 0;
+		break;
+	case COMP_STOPPED_SHORT_PACKET:
+		td->preq->request.actual = remaining;
+		goto finish_td;
+	case COMP_STOPPED_LENGTH_INVALID:
+		/* Stopped on ep trb with invalid length, exclude it. */
+		ep_trb_len = 0;
+		remaining = 0;
+		break;
+	}
+
+	if (ep_trb == td->last_trb)
+		ep_trb_len = requested - remaining;
+	else
+		ep_trb_len = cdnsp_sum_trb_lengths(pdev, ep_ring, ep_trb) +
+						   ep_trb_len - remaining;
+	td->preq->request.actual = ep_trb_len;
+
+finish_td:
+	ep->stream_info.drbls_count--;
+
+	cdnsp_finish_td(pdev, td, event, ep, status);
+}
+
+static void cdnsp_handle_tx_nrdy(struct cdnsp_device *pdev,
+				 struct cdnsp_transfer_event *event)
+{
+	struct cdnsp_generic_trb *generic;
+	struct cdnsp_ring *ep_ring;
+	struct cdnsp_ep *pep;
+	int cur_stream;
+	int ep_index;
+	int host_sid;
+	int dev_sid;
+
+	generic = (struct cdnsp_generic_trb *)event;
+	ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
+	dev_sid = TRB_TO_DEV_STREAM(le32_to_cpu(generic->field[0]));
+	host_sid = TRB_TO_HOST_STREAM(le32_to_cpu(generic->field[2]));
+
+	pep = &pdev->eps[ep_index];
+
+	if (!(pep->ep_state & EP_HAS_STREAMS))
+		return;
+
+	if (host_sid == STREAM_PRIME_ACK) {
+		pep->stream_info.first_prime_det = 1;
+		for (cur_stream = 1; cur_stream < pep->stream_info.num_streams;
+		    cur_stream++) {
+			ep_ring = pep->stream_info.stream_rings[cur_stream];
+			ep_ring->stream_active = 1;
+			ep_ring->stream_rejected = 0;
+		}
+	}
+
+	if (host_sid == STREAM_REJECTED) {
+		struct cdnsp_td *td, *td_temp;
+
+		pep->stream_info.drbls_count--;
+		ep_ring = pep->stream_info.stream_rings[dev_sid];
+		ep_ring->stream_active = 0;
+		ep_ring->stream_rejected = 1;
+
+		list_for_each_entry_safe(td, td_temp, &ep_ring->td_list,
+					 td_list) {
+			td->drbl = 0;
+		}
+	}
+
+	cdnsp_ring_doorbell_for_active_rings(pdev, pep);
+}
+
+/*
+ * If this function returns an error condition, it means it got a Transfer
+ * event with a corrupted TRB DMA address or endpoint is disabled.
+ */
+static int cdnsp_handle_tx_event(struct cdnsp_device *pdev,
+				 struct cdnsp_transfer_event *event)
+{
+	const struct usb_endpoint_descriptor *desc;
+	bool handling_skipped_tds = false;
+	struct cdnsp_segment *ep_seg;
+	struct cdnsp_ring *ep_ring;
+	int status = -EINPROGRESS;
+	union cdnsp_trb *ep_trb;
+	dma_addr_t ep_trb_dma;
+	struct cdnsp_ep *pep;
+	struct cdnsp_td *td;
+	u32 trb_comp_code;
+	int invalidate;
+	int ep_index;
+
+	invalidate = le32_to_cpu(event->flags) & TRB_EVENT_INVALIDATE;
+	ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
+	trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
+	ep_trb_dma = le64_to_cpu(event->buffer);
+
+	pep = &pdev->eps[ep_index];
+	ep_ring = cdnsp_dma_to_transfer_ring(pep, le64_to_cpu(event->buffer));
+
+	/*
+	 * If device is disconnect then all requests will be dequeued
+	 * by upper layers as part of disconnect sequence.
+	 * We don't want handle such event to avoid racing.
+	 */
+	if (invalidate || !pdev->gadget.connected)
+		goto cleanup;
+
+	if (GET_EP_CTX_STATE(pep->out_ctx) == EP_STATE_DISABLED) {
+		trace_cdnsp_ep_disabled(pep->out_ctx);
+		goto err_out;
+	}
+
+	/* Some transfer events don't always point to a trb*/
+	if (!ep_ring) {
+		switch (trb_comp_code) {
+		case COMP_INVALID_STREAM_TYPE_ERROR:
+		case COMP_INVALID_STREAM_ID_ERROR:
+		case COMP_RING_UNDERRUN:
+		case COMP_RING_OVERRUN:
+			goto cleanup;
+		default:
+			dev_err(pdev->dev, "ERROR: %s event for unknown ring\n",
+				pep->name);
+			goto err_out;
+		}
+	}
+
+	/* Look for some error cases that need special treatment. */
+	switch (trb_comp_code) {
+	case COMP_BABBLE_DETECTED_ERROR:
+		status = -EOVERFLOW;
+		break;
+	case COMP_RING_UNDERRUN:
+	case COMP_RING_OVERRUN:
+		/*
+		 * When the Isoch ring is empty, the controller will generate
+		 * a Ring Overrun Event for IN Isoch endpoint or Ring
+		 * Underrun Event for OUT Isoch endpoint.
+		 */
+		goto cleanup;
+	case COMP_MISSED_SERVICE_ERROR:
+		/*
+		 * When encounter missed service error, one or more isoc tds
+		 * may be missed by controller.
+		 * Set skip flag of the ep_ring; Complete the missed tds as
+		 * short transfer when process the ep_ring next time.
+		 */
+		pep->skip = true;
+		break;
+	}
+
+	do {
+		/*
+		 * This TRB should be in the TD at the head of this ring's TD
+		 * list.
+		 */
+		if (list_empty(&ep_ring->td_list)) {
+			/*
+			 * Don't print warnings if it's due to a stopped
+			 * endpoint generating an extra completion event, or
+			 * a event for the last TRB of a short TD we already
+			 * got a short event for.
+			 * The short TD is already removed from the TD list.
+			 */
+			if (!(trb_comp_code == COMP_STOPPED ||
+			      trb_comp_code == COMP_STOPPED_LENGTH_INVALID ||
+			      ep_ring->last_td_was_short))
+				trace_cdnsp_trb_without_td(ep_ring,
+					(struct cdnsp_generic_trb *)event);
+
+			if (pep->skip) {
+				pep->skip = false;
+				trace_cdnsp_ep_list_empty_with_skip(pep, 0);
+			}
+
+			goto cleanup;
+		}
+
+		td = list_entry(ep_ring->td_list.next, struct cdnsp_td,
+				td_list);
+
+		/* Is this a TRB in the currently executing TD? */
+		ep_seg = cdnsp_trb_in_td(pdev, ep_ring->deq_seg,
+					 ep_ring->dequeue, td->last_trb,
+					 ep_trb_dma);
+
+		/*
+		 * Skip the Force Stopped Event. The event_trb(ep_trb_dma)
+		 * of FSE is not in the current TD pointed by ep_ring->dequeue
+		 * because that the hardware dequeue pointer still at the
+		 * previous TRB of the current TD. The previous TRB maybe a
+		 * Link TD or the last TRB of the previous TD. The command
+		 * completion handle will take care the rest.
+		 */
+		if (!ep_seg && (trb_comp_code == COMP_STOPPED ||
+				trb_comp_code == COMP_STOPPED_LENGTH_INVALID)) {
+			pep->skip = false;
+			goto cleanup;
+		}
+
+		desc = td->preq->pep->endpoint.desc;
+		if (!ep_seg) {
+			if (!pep->skip || !usb_endpoint_xfer_isoc(desc)) {
+				/* Something is busted, give up! */
+				dev_err(pdev->dev,
+					"ERROR Transfer event TRB DMA ptr not "
+					"part of current TD ep_index %d "
+					"comp_code %u\n", ep_index,
+					trb_comp_code);
+				return -EINVAL;
+			}
+
+			cdnsp_skip_isoc_td(pdev, td, event, pep, status);
+			goto cleanup;
+		}
+
+		if (trb_comp_code == COMP_SHORT_PACKET)
+			ep_ring->last_td_was_short = true;
+		else
+			ep_ring->last_td_was_short = false;
+
+		if (pep->skip) {
+			pep->skip = false;
+			cdnsp_skip_isoc_td(pdev, td, event, pep, status);
+			goto cleanup;
+		}
+
+		ep_trb = &ep_seg->trbs[(ep_trb_dma - ep_seg->dma)
+				       / sizeof(*ep_trb)];
+
+		trace_cdnsp_handle_transfer(ep_ring,
+					    (struct cdnsp_generic_trb *)ep_trb);
+
+		if (cdnsp_trb_is_noop(ep_trb))
+			goto cleanup;
+
+		if (usb_endpoint_xfer_control(desc))
+			cdnsp_process_ctrl_td(pdev, td, ep_trb, event, pep,
+					      &status);
+		else if (usb_endpoint_xfer_isoc(desc))
+			cdnsp_process_isoc_td(pdev, td, ep_trb, event, pep,
+					      status);
+		else
+			cdnsp_process_bulk_intr_td(pdev, td, ep_trb, event, pep,
+						   &status);
+cleanup:
+		handling_skipped_tds = pep->skip;
+
+		/*
+		 * Do not update event ring dequeue pointer if we're in a loop
+		 * processing missed tds.
+		 */
+		if (!handling_skipped_tds)
+			cdnsp_inc_deq(pdev, pdev->event_ring);
+
+	/*
+	 * If ep->skip is set, it means there are missed tds on the
+	 * endpoint ring need to take care of.
+	 * Process them as short transfer until reach the td pointed by
+	 * the event.
+	 */
+	} while (handling_skipped_tds);
+	return 0;
+
+err_out:
+	dev_err(pdev->dev, "@%016llx %08x %08x %08x %08x\n",
+		(unsigned long long)
+		cdnsp_trb_virt_to_dma(pdev->event_ring->deq_seg,
+				      pdev->event_ring->dequeue),
+		 lower_32_bits(le64_to_cpu(event->buffer)),
+		 upper_32_bits(le64_to_cpu(event->buffer)),
+		 le32_to_cpu(event->transfer_len),
+		 le32_to_cpu(event->flags));
+	return -EINVAL;
+}
+
+/*
+ * This function handles all events on the event ring.
+ * Returns true for "possibly more events to process" (caller should call
+ * again), otherwise false if done.
+ */
+static bool cdnsp_handle_event(struct cdnsp_device *pdev)
+{
+	unsigned int comp_code;
+	union cdnsp_trb *event;
+	bool update_ptrs = true;
+	u32 cycle_bit;
+	int ret = 0;
+	u32 flags;
+
+	event = pdev->event_ring->dequeue;
+	flags = le32_to_cpu(event->event_cmd.flags);
+	cycle_bit = (flags & TRB_CYCLE);
+
+	/* Does the controller or driver own the TRB? */
+	if (cycle_bit != pdev->event_ring->cycle_state)
+		return false;
+
+	trace_cdnsp_handle_event(pdev->event_ring, &event->generic);
+
+	/*
+	 * Barrier between reading the TRB_CYCLE (valid) flag above and any
+	 * reads of the event's flags/data below.
+	 */
+	rmb();
+
+	switch (flags & TRB_TYPE_BITMASK) {
+	case TRB_TYPE(TRB_COMPLETION):
+		/*
+		 * Command can't be handled in interrupt context so just
+		 * increment command ring dequeue pointer.
+		 */
+		cdnsp_inc_deq(pdev, pdev->cmd_ring);
+		break;
+	case TRB_TYPE(TRB_PORT_STATUS):
+		cdnsp_handle_port_status(pdev, event);
+		update_ptrs = false;
+		break;
+	case TRB_TYPE(TRB_TRANSFER):
+		ret = cdnsp_handle_tx_event(pdev, &event->trans_event);
+		if (ret >= 0)
+			update_ptrs = false;
+		break;
+	case TRB_TYPE(TRB_SETUP):
+		pdev->ep0_stage = CDNSP_SETUP_STAGE;
+		pdev->setup_id = TRB_SETUPID_TO_TYPE(flags);
+		pdev->setup_speed = TRB_SETUP_SPEEDID(flags);
+		pdev->setup = *((struct usb_ctrlrequest *)
+				&event->trans_event.buffer);
+
+		cdnsp_setup_analyze(pdev);
+		break;
+	case TRB_TYPE(TRB_ENDPOINT_NRDY):
+		cdnsp_handle_tx_nrdy(pdev, &event->trans_event);
+		break;
+	case TRB_TYPE(TRB_HC_EVENT): {
+		comp_code = GET_COMP_CODE(le32_to_cpu(event->generic.field[2]));
+
+		switch (comp_code) {
+		case COMP_EVENT_RING_FULL_ERROR:
+			dev_err(pdev->dev, "Event Ring Full\n");
+			break;
+		default:
+			dev_err(pdev->dev, "Controller error code 0x%02x\n",
+				comp_code);
+		}
+
+		break;
+	}
+	case TRB_TYPE(TRB_MFINDEX_WRAP):
+	case TRB_TYPE(TRB_DRB_OVERFLOW):
+		break;
+	default:
+		dev_warn(pdev->dev, "ERROR unknown event type %ld\n",
+			 TRB_FIELD_TO_TYPE(flags));
+	}
+
+	if (update_ptrs)
+		/* Update SW event ring dequeue pointer. */
+		cdnsp_inc_deq(pdev, pdev->event_ring);
+
+	/*
+	 * Caller will call us again to check if there are more items
+	 * on the event ring.
+	 */
+	return true;
+}
+
+irqreturn_t cdnsp_thread_irq_handler(int irq, void *data)
+{
+	struct cdnsp_device *pdev = (struct cdnsp_device *)data;
+	union cdnsp_trb *event_ring_deq;
+	unsigned long flags;
+	int counter = 0;
+
+	local_bh_disable();
+	spin_lock_irqsave(&pdev->lock, flags);
+
+	if (pdev->cdnsp_state & (CDNSP_STATE_HALTED | CDNSP_STATE_DYING)) {
+		/*
+		 * While removing or stopping driver there may still be deferred
+		 * not handled interrupt which should not be treated as error.
+		 * Driver should simply ignore it.
+		 */
+		if (pdev->gadget_driver)
+			cdnsp_died(pdev);
+
+		spin_unlock_irqrestore(&pdev->lock, flags);
+		local_bh_enable();
+		return IRQ_HANDLED;
+	}
+
+	event_ring_deq = pdev->event_ring->dequeue;
+
+	while (cdnsp_handle_event(pdev)) {
+		if (++counter >= TRBS_PER_EV_DEQ_UPDATE) {
+			cdnsp_update_erst_dequeue(pdev, event_ring_deq, 0);
+			event_ring_deq = pdev->event_ring->dequeue;
+			counter = 0;
+		}
+	}
+
+	cdnsp_update_erst_dequeue(pdev, event_ring_deq, 1);
+
+	spin_unlock_irqrestore(&pdev->lock, flags);
+	local_bh_enable();
+
+	return IRQ_HANDLED;
+}
+
+irqreturn_t cdnsp_irq_handler(int irq, void *priv)
+{
+	struct cdnsp_device *pdev = (struct cdnsp_device *)priv;
+	u32 irq_pending;
+	u32 status;
+
+	status = readl(&pdev->op_regs->status);
+
+	if (status == ~(u32)0) {
+		cdnsp_died(pdev);
+		return IRQ_HANDLED;
+	}
+
+	if (!(status & STS_EINT))
+		return IRQ_NONE;
+
+	writel(status | STS_EINT, &pdev->op_regs->status);
+	irq_pending = readl(&pdev->ir_set->irq_pending);
+	irq_pending |= IMAN_IP;
+	writel(irq_pending, &pdev->ir_set->irq_pending);
+
+	if (status & STS_FATAL) {
+		cdnsp_died(pdev);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_WAKE_THREAD;
+}
+
+/*
+ * Generic function for queuing a TRB on a ring.
+ * The caller must have checked to make sure there's room on the ring.
+ *
+ * @more_trbs_coming:	Will you enqueue more TRBs before setting doorbell?
+ */
+static void cdnsp_queue_trb(struct cdnsp_device *pdev, struct cdnsp_ring *ring,
+			    bool more_trbs_coming, u32 field1, u32 field2,
+			    u32 field3, u32 field4)
+{
+	struct cdnsp_generic_trb *trb;
+
+	trb = &ring->enqueue->generic;
+
+	trb->field[0] = cpu_to_le32(field1);
+	trb->field[1] = cpu_to_le32(field2);
+	trb->field[2] = cpu_to_le32(field3);
+	trb->field[3] = cpu_to_le32(field4);
+
+	trace_cdnsp_queue_trb(ring, trb);
+	cdnsp_inc_enq(pdev, ring, more_trbs_coming);
+}
+
+/*
+ * Does various checks on the endpoint ring, and makes it ready to
+ * queue num_trbs.
+ */
+static int cdnsp_prepare_ring(struct cdnsp_device *pdev,
+			      struct cdnsp_ring *ep_ring,
+			      u32 ep_state, unsigned
+			      int num_trbs,
+			      gfp_t mem_flags)
+{
+	unsigned int num_trbs_needed;
+
+	/* Make sure the endpoint has been added to controller schedule. */
+	switch (ep_state) {
+	case EP_STATE_STOPPED:
+	case EP_STATE_RUNNING:
+	case EP_STATE_HALTED:
+		break;
+	default:
+		dev_err(pdev->dev, "ERROR: incorrect endpoint state\n");
+		return -EINVAL;
+	}
+
+	while (1) {
+		if (cdnsp_room_on_ring(pdev, ep_ring, num_trbs))
+			break;
+
+		trace_cdnsp_no_room_on_ring("try ring expansion");
+
+		num_trbs_needed = num_trbs - ep_ring->num_trbs_free;
+		if (cdnsp_ring_expansion(pdev, ep_ring, num_trbs_needed,
+					 mem_flags)) {
+			dev_err(pdev->dev, "Ring expansion failed\n");
+			return -ENOMEM;
+		}
+	}
+
+	while (cdnsp_trb_is_link(ep_ring->enqueue)) {
+		ep_ring->enqueue->link.control |= cpu_to_le32(TRB_CHAIN);
+		/* The cycle bit must be set as the last operation. */
+		wmb();
+		ep_ring->enqueue->link.control ^= cpu_to_le32(TRB_CYCLE);
+
+		/* Toggle the cycle bit after the last ring segment. */
+		if (cdnsp_link_trb_toggles_cycle(ep_ring->enqueue))
+			ep_ring->cycle_state ^= 1;
+		ep_ring->enq_seg = ep_ring->enq_seg->next;
+		ep_ring->enqueue = ep_ring->enq_seg->trbs;
+	}
+	return 0;
+}
+
+static int cdnsp_prepare_transfer(struct cdnsp_device *pdev,
+				  struct cdnsp_request *preq,
+				  unsigned int num_trbs)
+{
+	struct cdnsp_ring *ep_ring;
+	int ret;
+
+	ep_ring = cdnsp_get_transfer_ring(pdev, preq->pep,
+					  preq->request.stream_id);
+	if (!ep_ring)
+		return -EINVAL;
+
+	ret = cdnsp_prepare_ring(pdev, ep_ring,
+				 GET_EP_CTX_STATE(preq->pep->out_ctx),
+				 num_trbs, GFP_ATOMIC);
+	if (ret)
+		return ret;
+
+	INIT_LIST_HEAD(&preq->td.td_list);
+	preq->td.preq = preq;
+
+	/* Add this TD to the tail of the endpoint ring's TD list. */
+	list_add_tail(&preq->td.td_list, &ep_ring->td_list);
+	ep_ring->num_tds++;
+	preq->pep->stream_info.td_count++;
+
+	preq->td.start_seg = ep_ring->enq_seg;
+	preq->td.first_trb = ep_ring->enqueue;
+
+	return 0;
+}
+
+static unsigned int cdnsp_count_trbs(u64 addr, u64 len)
+{
+	unsigned int num_trbs;
+
+	num_trbs = DIV_ROUND_UP(len + (addr & (TRB_MAX_BUFF_SIZE - 1)),
+				TRB_MAX_BUFF_SIZE);
+	if (num_trbs == 0)
+		num_trbs++;
+
+	return num_trbs;
+}
+
+static unsigned int count_trbs_needed(struct cdnsp_request *preq)
+{
+	return cdnsp_count_trbs(preq->request.dma, preq->request.length);
+}
+
+static unsigned int count_sg_trbs_needed(struct cdnsp_request *preq)
+{
+	unsigned int i, len, full_len, num_trbs = 0;
+	struct scatterlist *sg;
+
+	full_len = preq->request.length;
+
+	for_each_sg(preq->request.sg, sg, preq->request.num_sgs, i) {
+		len = sg_dma_len(sg);
+		num_trbs += cdnsp_count_trbs(sg_dma_address(sg), len);
+		len = min(len, full_len);
+		full_len -= len;
+		if (full_len == 0)
+			break;
+	}
+
+	return num_trbs;
+}
+
+static unsigned int count_isoc_trbs_needed(struct cdnsp_request *preq)
+{
+	return cdnsp_count_trbs(preq->request.dma, preq->request.length);
+}
+
+static void cdnsp_check_trb_math(struct cdnsp_request *preq, int running_total)
+{
+	if (running_total != preq->request.length)
+		dev_err(preq->pep->pdev->dev,
+			"%s - Miscalculated tx length, "
+			"queued %#x, asked for %#x (%d)\n",
+			preq->pep->name, running_total,
+			preq->request.length, preq->request.actual);
+}
+
+/*
+ * TD size is the number of max packet sized packets remaining in the TD
+ * (*not* including this TRB).
+ *
+ * Total TD packet count = total_packet_count =
+ *     DIV_ROUND_UP(TD size in bytes / wMaxPacketSize)
+ *
+ * Packets transferred up to and including this TRB = packets_transferred =
+ *     rounddown(total bytes transferred including this TRB / wMaxPacketSize)
+ *
+ * TD size = total_packet_count - packets_transferred
+ *
+ * It must fit in bits 21:17, so it can't be bigger than 31.
+ * This is taken care of in the TRB_TD_SIZE() macro
+ *
+ * The last TRB in a TD must have the TD size set to zero.
+ */
+static u32 cdnsp_td_remainder(struct cdnsp_device *pdev,
+			      int transferred,
+			      int trb_buff_len,
+			      unsigned int td_total_len,
+			      struct cdnsp_request *preq,
+			      bool more_trbs_coming,
+			      bool zlp)
+{
+	u32 maxp, total_packet_count;
+
+	/* Before ZLP driver needs set TD_SIZE = 1. */
+	if (zlp)
+		return 1;
+
+	/* One TRB with a zero-length data packet. */
+	if (!more_trbs_coming || (transferred == 0 && trb_buff_len == 0) ||
+	    trb_buff_len == td_total_len)
+		return 0;
+
+	maxp = usb_endpoint_maxp(preq->pep->endpoint.desc);
+	total_packet_count = DIV_ROUND_UP(td_total_len, maxp);
+
+	/* Queuing functions don't count the current TRB into transferred. */
+	return (total_packet_count - ((transferred + trb_buff_len) / maxp));
+}
+
+static int cdnsp_align_td(struct cdnsp_device *pdev,
+			  struct cdnsp_request *preq, u32 enqd_len,
+			  u32 *trb_buff_len, struct cdnsp_segment *seg)
+{
+	struct device *dev = pdev->dev;
+	unsigned int unalign;
+	unsigned int max_pkt;
+	u32 new_buff_len;
+
+	max_pkt = usb_endpoint_maxp(preq->pep->endpoint.desc);
+	unalign = (enqd_len + *trb_buff_len) % max_pkt;
+
+	/* We got lucky, last normal TRB data on segment is packet aligned. */
+	if (unalign == 0)
+		return 0;
+
+	/* Is the last nornal TRB alignable by splitting it. */
+	if (*trb_buff_len > unalign) {
+		*trb_buff_len -= unalign;
+		trace_cdnsp_bounce_align_td_split(preq, *trb_buff_len,
+						  enqd_len, 0, unalign);
+		return 0;
+	}
+
+	/*
+	 * We want enqd_len + trb_buff_len to sum up to a number aligned to
+	 * number which is divisible by the endpoint's wMaxPacketSize. IOW:
+	 * (size of currently enqueued TRBs + remainder) % wMaxPacketSize == 0.
+	 */
+	new_buff_len = max_pkt - (enqd_len % max_pkt);
+
+	if (new_buff_len > (preq->request.length - enqd_len))
+		new_buff_len = (preq->request.length - enqd_len);
+
+	/* Create a max max_pkt sized bounce buffer pointed to by last trb. */
+	if (preq->direction) {
+		sg_pcopy_to_buffer(preq->request.sg,
+				   preq->request.num_mapped_sgs,
+				   seg->bounce_buf, new_buff_len, enqd_len);
+		seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
+						 max_pkt, DMA_TO_DEVICE);
+	} else {
+		seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
+						 max_pkt, DMA_FROM_DEVICE);
+	}
+
+	if (dma_mapping_error(dev, seg->bounce_dma)) {
+		/* Try without aligning.*/
+		dev_warn(pdev->dev,
+			 "Failed mapping bounce buffer, not aligning\n");
+		return 0;
+	}
+
+	*trb_buff_len = new_buff_len;
+	seg->bounce_len = new_buff_len;
+	seg->bounce_offs = enqd_len;
+
+	trace_cdnsp_bounce_map(preq, new_buff_len, enqd_len, seg->bounce_dma,
+			       unalign);
+
+	/*
+	 * Bounce buffer successful aligned and seg->bounce_dma will be used
+	 * in transfer TRB as new transfer buffer address.
+	 */
+	return 1;
+}
+
+int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
+{
+	unsigned int enqd_len, block_len, trb_buff_len, full_len;
+	unsigned int start_cycle, num_sgs = 0;
+	struct cdnsp_generic_trb *start_trb;
+	u32 field, length_field, remainder;
+	struct scatterlist *sg = NULL;
+	bool more_trbs_coming = true;
+	bool need_zero_pkt = false;
+	bool zero_len_trb = false;
+	struct cdnsp_ring *ring;
+	bool first_trb = true;
+	unsigned int num_trbs;
+	struct cdnsp_ep *pep;
+	u64 addr, send_addr;
+	int sent_len, ret;
+
+	ring = cdnsp_request_to_transfer_ring(pdev, preq);
+	if (!ring)
+		return -EINVAL;
+
+	full_len = preq->request.length;
+
+	if (preq->request.num_sgs) {
+		num_sgs = preq->request.num_sgs;
+		sg = preq->request.sg;
+		addr = (u64)sg_dma_address(sg);
+		block_len = sg_dma_len(sg);
+		num_trbs = count_sg_trbs_needed(preq);
+	} else {
+		num_trbs = count_trbs_needed(preq);
+		addr = (u64)preq->request.dma;
+		block_len = full_len;
+	}
+
+	pep = preq->pep;
+
+	/* Deal with request.zero - need one more td/trb. */
+	if (preq->request.zero && preq->request.length &&
+	    IS_ALIGNED(full_len, usb_endpoint_maxp(pep->endpoint.desc))) {
+		need_zero_pkt = true;
+		num_trbs++;
+	}
+
+	ret = cdnsp_prepare_transfer(pdev, preq, num_trbs);
+	if (ret)
+		return ret;
+
+	/*
+	 * Don't give the first TRB to the hardware (by toggling the cycle bit)
+	 * until we've finished creating all the other TRBs. The ring's cycle
+	 * state may change as we enqueue the other TRBs, so save it too.
+	 */
+	start_trb = &ring->enqueue->generic;
+	start_cycle = ring->cycle_state;
+	send_addr = addr;
+
+	/* Queue the TRBs, even if they are zero-length */
+	for (enqd_len = 0; zero_len_trb || first_trb || enqd_len < full_len;
+	     enqd_len += trb_buff_len) {
+		field = TRB_TYPE(TRB_NORMAL);
+
+		/* TRB buffer should not cross 64KB boundaries */
+		trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
+		trb_buff_len = min(trb_buff_len, block_len);
+		if (enqd_len + trb_buff_len > full_len)
+			trb_buff_len = full_len - enqd_len;
+
+		/* Don't change the cycle bit of the first TRB until later */
+		if (first_trb) {
+			first_trb = false;
+			if (start_cycle == 0)
+				field |= TRB_CYCLE;
+		} else {
+			field |= ring->cycle_state;
+		}
+
+		/*
+		 * Chain all the TRBs together; clear the chain bit in the last
+		 * TRB to indicate it's the last TRB in the chain.
+		 */
+		if (enqd_len + trb_buff_len < full_len || need_zero_pkt) {
+			field |= TRB_CHAIN;
+			if (cdnsp_trb_is_link(ring->enqueue + 1)) {
+				if (cdnsp_align_td(pdev, preq, enqd_len,
+						   &trb_buff_len,
+						   ring->enq_seg)) {
+					send_addr = ring->enq_seg->bounce_dma;
+					/* Assuming TD won't span 2 segs */
+					preq->td.bounce_seg = ring->enq_seg;
+				}
+			}
+		}
+
+		if (enqd_len + trb_buff_len >= full_len) {
+			if (need_zero_pkt && !zero_len_trb) {
+				zero_len_trb = true;
+			} else {
+				zero_len_trb = false;
+				field &= ~TRB_CHAIN;
+				field |= TRB_IOC;
+				more_trbs_coming = false;
+				need_zero_pkt = false;
+				preq->td.last_trb = ring->enqueue;
+			}
+		}
+
+		/* Only set interrupt on short packet for OUT endpoints. */
+		if (!preq->direction)
+			field |= TRB_ISP;
+
+		/* Set the TRB length, TD size, and interrupter fields. */
+		remainder = cdnsp_td_remainder(pdev, enqd_len, trb_buff_len,
+					       full_len, preq,
+					       more_trbs_coming,
+					       zero_len_trb);
+
+		length_field = TRB_LEN(trb_buff_len) | TRB_TD_SIZE(remainder) |
+			TRB_INTR_TARGET(0);
+
+		cdnsp_queue_trb(pdev, ring, more_trbs_coming,
+				lower_32_bits(send_addr),
+				upper_32_bits(send_addr),
+				length_field,
+				field);
+
+		addr += trb_buff_len;
+		sent_len = trb_buff_len;
+		while (sg && sent_len >= block_len) {
+			/* New sg entry */
+			--num_sgs;
+			sent_len -= block_len;
+			if (num_sgs != 0) {
+				sg = sg_next(sg);
+				block_len = sg_dma_len(sg);
+				addr = (u64)sg_dma_address(sg);
+				addr += sent_len;
+			}
+		}
+		block_len -= sent_len;
+		send_addr = addr;
+	}
+
+	cdnsp_check_trb_math(preq, enqd_len);
+	ret = cdnsp_giveback_first_trb(pdev, pep, preq->request.stream_id,
+				       start_cycle, start_trb);
+
+	if (ret)
+		preq->td.drbl = 1;
+
+	return 0;
+}
+
+int cdnsp_queue_ctrl_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
+{
+	u32 field, length_field, zlp = 0;
+	struct cdnsp_ep *pep = preq->pep;
+	struct cdnsp_ring *ep_ring;
+	int num_trbs;
+	u32 maxp;
+	int ret;
+
+	ep_ring = cdnsp_request_to_transfer_ring(pdev, preq);
+	if (!ep_ring)
+		return -EINVAL;
+
+	/* 1 TRB for data, 1 for status */
+	num_trbs = (pdev->three_stage_setup) ? 2 : 1;
+
+	maxp = usb_endpoint_maxp(pep->endpoint.desc);
+
+	if (preq->request.zero && preq->request.length &&
+	    (preq->request.length % maxp == 0)) {
+		num_trbs++;
+		zlp = 1;
+	}
+
+	ret = cdnsp_prepare_transfer(pdev, preq, num_trbs);
+	if (ret)
+		return ret;
+
+	/* If there's data, queue data TRBs */
+	if (preq->request.length > 0) {
+		field = TRB_TYPE(TRB_DATA);
+
+		if (zlp)
+			field |= TRB_CHAIN;
+		else
+			field |= TRB_IOC | (pdev->ep0_expect_in ? 0 : TRB_ISP);
+
+		if (pdev->ep0_expect_in)
+			field |= TRB_DIR_IN;
+
+		length_field = TRB_LEN(preq->request.length) |
+			       TRB_TD_SIZE(zlp) | TRB_INTR_TARGET(0);
+
+		cdnsp_queue_trb(pdev, ep_ring, true,
+				lower_32_bits(preq->request.dma),
+				upper_32_bits(preq->request.dma), length_field,
+				field | ep_ring->cycle_state |
+				TRB_SETUPID(pdev->setup_id) |
+				pdev->setup_speed);
+
+		if (zlp) {
+			field = TRB_TYPE(TRB_NORMAL) | TRB_IOC;
+
+			if (!pdev->ep0_expect_in)
+				field = TRB_ISP;
+
+			cdnsp_queue_trb(pdev, ep_ring, true,
+					lower_32_bits(preq->request.dma),
+					upper_32_bits(preq->request.dma), 0,
+					field | ep_ring->cycle_state |
+					TRB_SETUPID(pdev->setup_id) |
+					pdev->setup_speed);
+		}
+
+		pdev->ep0_stage = CDNSP_DATA_STAGE;
+	}
+
+	/* Save the DMA address of the last TRB in the TD. */
+	preq->td.last_trb = ep_ring->enqueue;
+
+	/* Queue status TRB. */
+	if (preq->request.length == 0)
+		field = ep_ring->cycle_state;
+	else
+		field = (ep_ring->cycle_state ^ 1);
+
+	if (preq->request.length > 0 && pdev->ep0_expect_in)
+		field |= TRB_DIR_IN;
+
+	if (pep->ep_state & EP0_HALTED_STATUS) {
+		pep->ep_state &= ~EP0_HALTED_STATUS;
+		field |= TRB_SETUPSTAT(TRB_SETUPSTAT_STALL);
+	} else {
+		field |= TRB_SETUPSTAT(TRB_SETUPSTAT_ACK);
+	}
+
+	cdnsp_queue_trb(pdev, ep_ring, false, 0, 0, TRB_INTR_TARGET(0),
+			field | TRB_IOC | TRB_SETUPID(pdev->setup_id) |
+			TRB_TYPE(TRB_STATUS) | pdev->setup_speed);
+
+	cdnsp_ring_ep_doorbell(pdev, pep, preq->request.stream_id);
+
+	return 0;
+}
+
+int cdnsp_cmd_stop_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep)
+{
+	u32 ep_state = GET_EP_CTX_STATE(pep->out_ctx);
+	int ret = 0;
+
+	if (ep_state == EP_STATE_STOPPED || ep_state == EP_STATE_DISABLED ||
+	    ep_state == EP_STATE_HALTED) {
+		trace_cdnsp_ep_stopped_or_disabled(pep->out_ctx);
+		goto ep_stopped;
+	}
+
+	cdnsp_queue_stop_endpoint(pdev, pep->idx);
+	cdnsp_ring_cmd_db(pdev);
+	ret = cdnsp_wait_for_cmd_compl(pdev);
+
+	trace_cdnsp_handle_cmd_stop_ep(pep->out_ctx);
+
+ep_stopped:
+	pep->ep_state |= EP_STOPPED;
+	return ret;
+}
+
+int cdnsp_cmd_flush_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep)
+{
+	int ret;
+
+	cdnsp_queue_flush_endpoint(pdev, pep->idx);
+	cdnsp_ring_cmd_db(pdev);
+	ret = cdnsp_wait_for_cmd_compl(pdev);
+
+	trace_cdnsp_handle_cmd_flush_ep(pep->out_ctx);
+
+	return ret;
+}
+
+/*
+ * The transfer burst count field of the isochronous TRB defines the number of
+ * bursts that are required to move all packets in this TD. Only SuperSpeed
+ * devices can burst up to bMaxBurst number of packets per service interval.
+ * This field is zero based, meaning a value of zero in the field means one
+ * burst. Basically, for everything but SuperSpeed devices, this field will be
+ * zero.
+ */
+static unsigned int cdnsp_get_burst_count(struct cdnsp_device *pdev,
+					  struct cdnsp_request *preq,
+					  unsigned int total_packet_count)
+{
+	unsigned int max_burst;
+
+	if (pdev->gadget.speed < USB_SPEED_SUPER)
+		return 0;
+
+	max_burst = preq->pep->endpoint.comp_desc->bMaxBurst;
+	return DIV_ROUND_UP(total_packet_count, max_burst + 1) - 1;
+}
+
+/*
+ * Returns the number of packets in the last "burst" of packets. This field is
+ * valid for all speeds of devices. USB 2.0 devices can only do one "burst", so
+ * the last burst packet count is equal to the total number of packets in the
+ * TD. SuperSpeed endpoints can have up to 3 bursts. All but the last burst
+ * must contain (bMaxBurst + 1) number of packets, but the last burst can
+ * contain 1 to (bMaxBurst + 1) packets.
+ */
+static unsigned int
+	cdnsp_get_last_burst_packet_count(struct cdnsp_device *pdev,
+					  struct cdnsp_request *preq,
+					  unsigned int total_packet_count)
+{
+	unsigned int max_burst;
+	unsigned int residue;
+
+	if (pdev->gadget.speed >= USB_SPEED_SUPER) {
+		/* bMaxBurst is zero based: 0 means 1 packet per burst. */
+		max_burst = preq->pep->endpoint.comp_desc->bMaxBurst;
+		residue = total_packet_count % (max_burst + 1);
+
+		/*
+		 * If residue is zero, the last burst contains (max_burst + 1)
+		 * number of packets, but the TLBPC field is zero-based.
+		 */
+		if (residue == 0)
+			return max_burst;
+
+		return residue - 1;
+	}
+	if (total_packet_count == 0)
+		return 0;
+
+	return total_packet_count - 1;
+}
+
+/* Queue function isoc transfer */
+static int cdnsp_queue_isoc_tx(struct cdnsp_device *pdev,
+			       struct cdnsp_request *preq)
+{
+	int trb_buff_len, td_len, td_remain_len, ret;
+	unsigned int burst_count, last_burst_pkt;
+	unsigned int total_pkt_count, max_pkt;
+	struct cdnsp_generic_trb *start_trb;
+	bool more_trbs_coming = true;
+	struct cdnsp_ring *ep_ring;
+	int running_total = 0;
+	u32 field, length_field;
+	int start_cycle;
+	int trbs_per_td;
+	u64 addr;
+	int i;
+
+	ep_ring = preq->pep->ring;
+	start_trb = &ep_ring->enqueue->generic;
+	start_cycle = ep_ring->cycle_state;
+	td_len = preq->request.length;
+	addr = (u64)preq->request.dma;
+	td_remain_len = td_len;
+
+	max_pkt = usb_endpoint_maxp(preq->pep->endpoint.desc);
+	total_pkt_count = DIV_ROUND_UP(td_len, max_pkt);
+
+	/* A zero-length transfer still involves at least one packet. */
+	if (total_pkt_count == 0)
+		total_pkt_count++;
+
+	burst_count = cdnsp_get_burst_count(pdev, preq, total_pkt_count);
+	last_burst_pkt = cdnsp_get_last_burst_packet_count(pdev, preq,
+							   total_pkt_count);
+	trbs_per_td = count_isoc_trbs_needed(preq);
+
+	ret = cdnsp_prepare_transfer(pdev, preq, trbs_per_td);
+	if (ret)
+		goto cleanup;
+
+	/*
+	 * Set isoc specific data for the first TRB in a TD.
+	 * Prevent HW from getting the TRBs by keeping the cycle state
+	 * inverted in the first TDs isoc TRB.
+	 */
+	field = TRB_TYPE(TRB_ISOC) | TRB_TLBPC(last_burst_pkt) |
+		TRB_SIA | TRB_TBC(burst_count);
+
+	if (!start_cycle)
+		field |= TRB_CYCLE;
+
+	/* Fill the rest of the TRB fields, and remaining normal TRBs. */
+	for (i = 0; i < trbs_per_td; i++) {
+		u32 remainder;
+
+		/* Calculate TRB length. */
+		trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
+		if (trb_buff_len > td_remain_len)
+			trb_buff_len = td_remain_len;
+
+		/* Set the TRB length, TD size, & interrupter fields. */
+		remainder = cdnsp_td_remainder(pdev, running_total,
+					       trb_buff_len, td_len, preq,
+					       more_trbs_coming, 0);
+
+		length_field = TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0);
+
+		/* Only first TRB is isoc, overwrite otherwise. */
+		if (i) {
+			field = TRB_TYPE(TRB_NORMAL) | ep_ring->cycle_state;
+			length_field |= TRB_TD_SIZE(remainder);
+		} else {
+			length_field |= TRB_TD_SIZE_TBC(burst_count);
+		}
+
+		/* Only set interrupt on short packet for OUT EPs. */
+		if (usb_endpoint_dir_out(preq->pep->endpoint.desc))
+			field |= TRB_ISP;
+
+		/* Set the chain bit for all except the last TRB. */
+		if (i < trbs_per_td - 1) {
+			more_trbs_coming = true;
+			field |= TRB_CHAIN;
+		} else {
+			more_trbs_coming = false;
+			preq->td.last_trb = ep_ring->enqueue;
+			field |= TRB_IOC;
+		}
+
+		cdnsp_queue_trb(pdev, ep_ring, more_trbs_coming,
+				lower_32_bits(addr), upper_32_bits(addr),
+				length_field, field);
+
+		running_total += trb_buff_len;
+		addr += trb_buff_len;
+		td_remain_len -= trb_buff_len;
+	}
+
+	/* Check TD length */
+	if (running_total != td_len) {
+		dev_err(pdev->dev, "ISOC TD length unmatch\n");
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	cdnsp_giveback_first_trb(pdev, preq->pep, preq->request.stream_id,
+				 start_cycle, start_trb);
+
+	return 0;
+
+cleanup:
+	/* Clean up a partially enqueued isoc transfer. */
+	list_del_init(&preq->td.td_list);
+	ep_ring->num_tds--;
+
+	/*
+	 * Use the first TD as a temporary variable to turn the TDs we've
+	 * queued into No-ops with a software-owned cycle bit.
+	 * That way the hardware won't accidentally start executing bogus TDs
+	 * when we partially overwrite them.
+	 * td->first_trb and td->start_seg are already set.
+	 */
+	preq->td.last_trb = ep_ring->enqueue;
+	/* Every TRB except the first & last will have its cycle bit flipped. */
+	cdnsp_td_to_noop(pdev, ep_ring, &preq->td, true);
+
+	/* Reset the ring enqueue back to the first TRB and its cycle bit. */
+	ep_ring->enqueue = preq->td.first_trb;
+	ep_ring->enq_seg = preq->td.start_seg;
+	ep_ring->cycle_state = start_cycle;
+	return ret;
+}
+
+int cdnsp_queue_isoc_tx_prepare(struct cdnsp_device *pdev,
+				struct cdnsp_request *preq)
+{
+	struct cdnsp_ring *ep_ring;
+	u32 ep_state;
+	int num_trbs;
+	int ret;
+
+	ep_ring = preq->pep->ring;
+	ep_state = GET_EP_CTX_STATE(preq->pep->out_ctx);
+	num_trbs = count_isoc_trbs_needed(preq);
+
+	/*
+	 * Check the ring to guarantee there is enough room for the whole
+	 * request. Do not insert any td of the USB Request to the ring if the
+	 * check failed.
+	 */
+	ret = cdnsp_prepare_ring(pdev, ep_ring, ep_state, num_trbs, GFP_ATOMIC);
+	if (ret)
+		return ret;
+
+	return cdnsp_queue_isoc_tx(pdev, preq);
+}
+
+/****		Command Ring Operations		****/
+/*
+ * Generic function for queuing a command TRB on the command ring.
+ * Driver queue only one command to ring in the moment.
+ */
+static void cdnsp_queue_command(struct cdnsp_device *pdev,
+				u32 field1,
+				u32 field2,
+				u32 field3,
+				u32 field4)
+{
+	cdnsp_prepare_ring(pdev, pdev->cmd_ring, EP_STATE_RUNNING, 1,
+			   GFP_ATOMIC);
+
+	pdev->cmd.command_trb = pdev->cmd_ring->enqueue;
+
+	cdnsp_queue_trb(pdev, pdev->cmd_ring, false, field1, field2,
+			field3, field4 | pdev->cmd_ring->cycle_state);
+}
+
+/* Queue a slot enable or disable request on the command ring */
+void cdnsp_queue_slot_control(struct cdnsp_device *pdev, u32 trb_type)
+{
+	cdnsp_queue_command(pdev, 0, 0, 0, TRB_TYPE(trb_type) |
+			    SLOT_ID_FOR_TRB(pdev->slot_id));
+}
+
+/* Queue an address device command TRB */
+void cdnsp_queue_address_device(struct cdnsp_device *pdev,
+				dma_addr_t in_ctx_ptr,
+				enum cdnsp_setup_dev setup)
+{
+	cdnsp_queue_command(pdev, lower_32_bits(in_ctx_ptr),
+			    upper_32_bits(in_ctx_ptr), 0,
+			    TRB_TYPE(TRB_ADDR_DEV) |
+			    SLOT_ID_FOR_TRB(pdev->slot_id) |
+			    (setup == SETUP_CONTEXT_ONLY ? TRB_BSR : 0));
+}
+
+/* Queue a reset device command TRB */
+void cdnsp_queue_reset_device(struct cdnsp_device *pdev)
+{
+	cdnsp_queue_command(pdev, 0, 0, 0, TRB_TYPE(TRB_RESET_DEV) |
+			    SLOT_ID_FOR_TRB(pdev->slot_id));
+}
+
+/* Queue a configure endpoint command TRB */
+void cdnsp_queue_configure_endpoint(struct cdnsp_device *pdev,
+				    dma_addr_t in_ctx_ptr)
+{
+	cdnsp_queue_command(pdev, lower_32_bits(in_ctx_ptr),
+			    upper_32_bits(in_ctx_ptr), 0,
+			    TRB_TYPE(TRB_CONFIG_EP) |
+			    SLOT_ID_FOR_TRB(pdev->slot_id));
+}
+
+/*
+ * Suspend is set to indicate "Stop Endpoint Command" is being issued to stop
+ * activity on an endpoint that is about to be suspended.
+ */
+void cdnsp_queue_stop_endpoint(struct cdnsp_device *pdev, unsigned int ep_index)
+{
+	cdnsp_queue_command(pdev, 0, 0, 0, SLOT_ID_FOR_TRB(pdev->slot_id) |
+			    EP_ID_FOR_TRB(ep_index) | TRB_TYPE(TRB_STOP_RING));
+}
+
+/* Set Transfer Ring Dequeue Pointer command. */
+void cdnsp_queue_new_dequeue_state(struct cdnsp_device *pdev,
+				   struct cdnsp_ep *pep,
+				   struct cdnsp_dequeue_state *deq_state)
+{
+	u32 trb_stream_id = STREAM_ID_FOR_TRB(deq_state->stream_id);
+	u32 trb_slot_id = SLOT_ID_FOR_TRB(pdev->slot_id);
+	u32 type = TRB_TYPE(TRB_SET_DEQ);
+	u32 trb_sct = 0;
+	dma_addr_t addr;
+
+	addr = cdnsp_trb_virt_to_dma(deq_state->new_deq_seg,
+				     deq_state->new_deq_ptr);
+
+	if (deq_state->stream_id)
+		trb_sct = SCT_FOR_TRB(SCT_PRI_TR);
+
+	cdnsp_queue_command(pdev, lower_32_bits(addr) | trb_sct |
+			    deq_state->new_cycle_state, upper_32_bits(addr),
+			    trb_stream_id, trb_slot_id |
+			    EP_ID_FOR_TRB(pep->idx) | type);
+}
+
+void cdnsp_queue_reset_ep(struct cdnsp_device *pdev, unsigned int ep_index)
+{
+	return cdnsp_queue_command(pdev, 0, 0, 0,
+				   SLOT_ID_FOR_TRB(pdev->slot_id) |
+				   EP_ID_FOR_TRB(ep_index) |
+				   TRB_TYPE(TRB_RESET_EP));
+}
+
+/*
+ * Queue a halt endpoint request on the command ring.
+ */
+void cdnsp_queue_halt_endpoint(struct cdnsp_device *pdev, unsigned int ep_index)
+{
+	cdnsp_queue_command(pdev, 0, 0, 0, TRB_TYPE(TRB_HALT_ENDPOINT) |
+			    SLOT_ID_FOR_TRB(pdev->slot_id) |
+			    EP_ID_FOR_TRB(ep_index));
+}
+
+/*
+ * Queue a flush endpoint request on the command ring.
+ */
+void  cdnsp_queue_flush_endpoint(struct cdnsp_device *pdev,
+				 unsigned int ep_index)
+{
+	cdnsp_queue_command(pdev, 0, 0, 0, TRB_TYPE(TRB_FLUSH_ENDPOINT) |
+			    SLOT_ID_FOR_TRB(pdev->slot_id) |
+			    EP_ID_FOR_TRB(ep_index));
+}
+
+void cdnsp_force_header_wakeup(struct cdnsp_device *pdev, int intf_num)
+{
+	u32 lo, mid;
+
+	lo = TRB_FH_TO_PACKET_TYPE(TRB_FH_TR_PACKET) |
+	     TRB_FH_TO_DEVICE_ADDRESS(pdev->device_address);
+	mid = TRB_FH_TR_PACKET_DEV_NOT |
+	      TRB_FH_TO_NOT_TYPE(TRB_FH_TR_PACKET_FUNCTION_WAKE) |
+	      TRB_FH_TO_INTERFACE(intf_num);
+
+	cdnsp_queue_command(pdev, lo, mid, 0,
+			    TRB_TYPE(TRB_FORCE_HEADER) | SET_PORT_ID(2));
+}
diff --git a/drivers/usb/cdns3/cdnsp-trace.c b/drivers/usb/cdns3/cdnsp-trace.c
new file mode 100644
index 000000000..e50ab799a
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-trace.c
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence CDNSP DRD Driver.
+ *
+ * Copyright (C) 2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ */
+
+#define CREATE_TRACE_POINTS
+#include "cdnsp-trace.h"
diff --git a/drivers/usb/cdns3/cdnsp-trace.h b/drivers/usb/cdns3/cdnsp-trace.h
new file mode 100644
index 000000000..5983dfb99
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-trace.h
@@ -0,0 +1,830 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence CDNSP DRD Driver.
+ * Trace support header file
+ *
+ * Copyright (C) 2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM cdnsp-dev
+
+/*
+ * The TRACE_SYSTEM_VAR defaults to TRACE_SYSTEM, but must be a
+ * legitimate C variable. It is not exported to user space.
+ */
+#undef TRACE_SYSTEM_VAR
+#define TRACE_SYSTEM_VAR cdnsp_dev
+
+#if !defined(__CDNSP_DEV_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define __CDNSP_DEV_TRACE_H
+
+#include <linux/tracepoint.h>
+#include "cdnsp-gadget.h"
+#include "cdnsp-debug.h"
+
+/*
+ * There is limitation for single buffer size in TRACEPOINT subsystem.
+ * By default TRACE_BUF_SIZE is 1024, so no all data will be logged.
+ * To show more data this must be increased. In most cases the default
+ * value is sufficient.
+ */
+#define CDNSP_MSG_MAX 500
+
+DECLARE_EVENT_CLASS(cdnsp_log_ep,
+	TP_PROTO(struct cdnsp_ep *pep, u32 stream_id),
+	TP_ARGS(pep, stream_id),
+	TP_STRUCT__entry(
+		__string(name, pep->name)
+		__field(unsigned int, state)
+		__field(u32, stream_id)
+		__field(u8, enabled)
+		__field(unsigned int, num_streams)
+		__field(int, td_count)
+		__field(u8, first_prime_det)
+		__field(u8, drbls_count)
+	),
+	TP_fast_assign(
+		__assign_str(name, pep->name);
+		__entry->state = pep->ep_state;
+		__entry->stream_id = stream_id;
+		__entry->enabled = pep->ep_state & EP_HAS_STREAMS;
+		__entry->num_streams = pep->stream_info.num_streams;
+		__entry->td_count = pep->stream_info.td_count;
+		__entry->first_prime_det = pep->stream_info.first_prime_det;
+		__entry->drbls_count = pep->stream_info.drbls_count;
+	),
+	TP_printk("%s: SID: %08x, ep state: %x, stream: enabled: %d num %d "
+		  "tds %d, first prime: %d drbls %d",
+		  __get_str(name), __entry->stream_id, __entry->state,
+		  __entry->enabled, __entry->num_streams, __entry->td_count,
+		  __entry->first_prime_det, __entry->drbls_count)
+);
+
+DEFINE_EVENT(cdnsp_log_ep, cdnsp_tr_drbl,
+	TP_PROTO(struct cdnsp_ep *pep, u32 stream_id),
+	TP_ARGS(pep, stream_id)
+);
+
+DEFINE_EVENT(cdnsp_log_ep, cdnsp_wait_for_prime,
+	TP_PROTO(struct cdnsp_ep *pep, u32 stream_id),
+	TP_ARGS(pep, stream_id)
+);
+
+DEFINE_EVENT(cdnsp_log_ep, cdnsp_ep_list_empty_with_skip,
+	TP_PROTO(struct cdnsp_ep *pep, u32 stream_id),
+	TP_ARGS(pep, stream_id)
+);
+
+DEFINE_EVENT(cdnsp_log_ep, cdnsp_ep_enable_end,
+	TP_PROTO(struct cdnsp_ep *pep, u32 stream_id),
+	TP_ARGS(pep, stream_id)
+);
+
+DEFINE_EVENT(cdnsp_log_ep, cdnsp_ep_disable_end,
+	TP_PROTO(struct cdnsp_ep *pep, u32 stream_id),
+	TP_ARGS(pep, stream_id)
+);
+
+DEFINE_EVENT(cdnsp_log_ep, cdnsp_ep_busy_try_halt_again,
+	TP_PROTO(struct cdnsp_ep *pep, u32 stream_id),
+	TP_ARGS(pep, stream_id)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_enable_disable,
+	TP_PROTO(int set),
+	TP_ARGS(set),
+	TP_STRUCT__entry(
+		__field(int, set)
+	),
+	TP_fast_assign(
+		__entry->set = set;
+	),
+	TP_printk("%s", __entry->set ? "enabled" : "disabled")
+);
+
+DEFINE_EVENT(cdnsp_log_enable_disable, cdnsp_pullup,
+	TP_PROTO(int set),
+	TP_ARGS(set)
+);
+
+DEFINE_EVENT(cdnsp_log_enable_disable, cdnsp_u1,
+	TP_PROTO(int set),
+	TP_ARGS(set)
+);
+
+DEFINE_EVENT(cdnsp_log_enable_disable, cdnsp_u2,
+	TP_PROTO(int set),
+	TP_ARGS(set)
+);
+
+DEFINE_EVENT(cdnsp_log_enable_disable, cdnsp_lpm,
+	TP_PROTO(int set),
+	TP_ARGS(set)
+);
+
+DEFINE_EVENT(cdnsp_log_enable_disable, cdnsp_may_wakeup,
+	TP_PROTO(int set),
+	TP_ARGS(set)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_simple,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg),
+	TP_STRUCT__entry(
+		__string(text, msg)
+	),
+	TP_fast_assign(
+		__assign_str(text, msg);
+	),
+	TP_printk("%s", __get_str(text))
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_exit,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_init,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_slot_id,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_no_room_on_ring,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_ep0_status_stage,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_ep0_request,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_ep0_set_config,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_ep0_halted,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_ep_halt,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+TRACE_EVENT(cdnsp_looking_trb_in_td,
+	TP_PROTO(dma_addr_t suspect, dma_addr_t trb_start, dma_addr_t trb_end,
+		 dma_addr_t curr_seg, dma_addr_t end_seg),
+	TP_ARGS(suspect, trb_start, trb_end, curr_seg, end_seg),
+	TP_STRUCT__entry(
+		__field(dma_addr_t, suspect)
+		__field(dma_addr_t, trb_start)
+		__field(dma_addr_t, trb_end)
+		__field(dma_addr_t, curr_seg)
+		__field(dma_addr_t, end_seg)
+	),
+	TP_fast_assign(
+		__entry->suspect = suspect;
+		__entry->trb_start = trb_start;
+		__entry->trb_end = trb_end;
+		__entry->curr_seg = curr_seg;
+		__entry->end_seg = end_seg;
+	),
+	TP_printk("DMA: suspect event: %pad, trb-start: %pad, trb-end %pad, "
+		  "seg-start %pad, seg-end %pad",
+		  &__entry->suspect, &__entry->trb_start, &__entry->trb_end,
+		  &__entry->curr_seg, &__entry->end_seg)
+);
+
+TRACE_EVENT(cdnsp_port_info,
+	TP_PROTO(__le32 __iomem *addr, u32 offset, u32 count, u32 rev),
+	TP_ARGS(addr, offset, count, rev),
+	TP_STRUCT__entry(
+		__field(__le32 __iomem *, addr)
+		__field(u32, offset)
+		__field(u32, count)
+		__field(u32, rev)
+	),
+	TP_fast_assign(
+		__entry->addr = addr;
+		__entry->offset = offset;
+		__entry->count = count;
+		__entry->rev = rev;
+	),
+	TP_printk("Ext Cap %p, port offset = %u, count = %u, rev = 0x%x",
+		  __entry->addr, __entry->offset, __entry->count, __entry->rev)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_deq_state,
+	TP_PROTO(struct cdnsp_dequeue_state *state),
+	TP_ARGS(state),
+	TP_STRUCT__entry(
+		__field(int, new_cycle_state)
+		__field(struct cdnsp_segment *, new_deq_seg)
+		__field(dma_addr_t, deq_seg_dma)
+		__field(union cdnsp_trb	*, new_deq_ptr)
+		__field(dma_addr_t, deq_ptr_dma)
+	),
+	TP_fast_assign(
+		__entry->new_cycle_state = state->new_cycle_state;
+		__entry->new_deq_seg = state->new_deq_seg;
+		__entry->deq_seg_dma = state->new_deq_seg->dma;
+		__entry->new_deq_ptr = state->new_deq_ptr,
+		__entry->deq_ptr_dma = cdnsp_trb_virt_to_dma(state->new_deq_seg,
+							     state->new_deq_ptr);
+	),
+	TP_printk("New cycle state = 0x%x, New dequeue segment = %p (0x%pad dma), "
+		  "New dequeue pointer = %p (0x%pad dma)",
+		  __entry->new_cycle_state, __entry->new_deq_seg,
+		  &__entry->deq_seg_dma, __entry->new_deq_ptr,
+		  &__entry->deq_ptr_dma
+	)
+);
+
+DEFINE_EVENT(cdnsp_log_deq_state, cdnsp_new_deq_state,
+	TP_PROTO(struct cdnsp_dequeue_state *state),
+	TP_ARGS(state)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_ctrl,
+	TP_PROTO(struct usb_ctrlrequest *ctrl),
+	TP_ARGS(ctrl),
+	TP_STRUCT__entry(
+		__field(u8, bRequestType)
+		__field(u8, bRequest)
+		__field(u16, wValue)
+		__field(u16, wIndex)
+		__field(u16, wLength)
+		__dynamic_array(char, str, CDNSP_MSG_MAX)
+	),
+	TP_fast_assign(
+		__entry->bRequestType = ctrl->bRequestType;
+		__entry->bRequest = ctrl->bRequest;
+		__entry->wValue = le16_to_cpu(ctrl->wValue);
+		__entry->wIndex = le16_to_cpu(ctrl->wIndex);
+		__entry->wLength = le16_to_cpu(ctrl->wLength);
+	),
+	TP_printk("%s", usb_decode_ctrl(__get_str(str), CDNSP_MSG_MAX,
+					__entry->bRequestType,
+					__entry->bRequest, __entry->wValue,
+					__entry->wIndex, __entry->wLength)
+	)
+);
+
+DEFINE_EVENT(cdnsp_log_ctrl, cdnsp_ctrl_req,
+	TP_PROTO(struct usb_ctrlrequest *ctrl),
+	TP_ARGS(ctrl)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_bounce,
+	TP_PROTO(struct cdnsp_request *preq, u32 new_buf_len, u32 offset,
+		 dma_addr_t dma, unsigned int unalign),
+	TP_ARGS(preq, new_buf_len, offset, dma, unalign),
+	TP_STRUCT__entry(
+		__string(name, preq->pep->name)
+		__field(u32, new_buf_len)
+		__field(u32, offset)
+		__field(dma_addr_t, dma)
+		__field(unsigned int, unalign)
+	),
+	TP_fast_assign(
+		__assign_str(name, preq->pep->name);
+		__entry->new_buf_len = new_buf_len;
+		__entry->offset = offset;
+		__entry->dma = dma;
+		__entry->unalign = unalign;
+	),
+	TP_printk("%s buf len %d, offset %d, dma %pad, unalign %d",
+		  __get_str(name), __entry->new_buf_len,
+		  __entry->offset, &__entry->dma, __entry->unalign
+	)
+);
+
+DEFINE_EVENT(cdnsp_log_bounce, cdnsp_bounce_align_td_split,
+	TP_PROTO(struct cdnsp_request *preq, u32 new_buf_len, u32 offset,
+		 dma_addr_t dma, unsigned int unalign),
+	TP_ARGS(preq, new_buf_len, offset, dma, unalign)
+);
+
+DEFINE_EVENT(cdnsp_log_bounce, cdnsp_bounce_map,
+	TP_PROTO(struct cdnsp_request *preq, u32 new_buf_len, u32 offset,
+		 dma_addr_t dma, unsigned int unalign),
+	TP_ARGS(preq, new_buf_len, offset, dma, unalign)
+);
+
+DEFINE_EVENT(cdnsp_log_bounce, cdnsp_bounce_unmap,
+	TP_PROTO(struct cdnsp_request *preq, u32 new_buf_len, u32 offset,
+		 dma_addr_t dma, unsigned int unalign),
+	TP_ARGS(preq, new_buf_len, offset, dma, unalign)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_trb,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb),
+	TP_STRUCT__entry(
+		__field(u32, type)
+		__field(u32, field0)
+		__field(u32, field1)
+		__field(u32, field2)
+		__field(u32, field3)
+		__field(union cdnsp_trb *, trb)
+		__field(dma_addr_t, trb_dma)
+		__dynamic_array(char, str, CDNSP_MSG_MAX)
+	),
+	TP_fast_assign(
+		__entry->type = ring->type;
+		__entry->field0 = le32_to_cpu(trb->field[0]);
+		__entry->field1 = le32_to_cpu(trb->field[1]);
+		__entry->field2 = le32_to_cpu(trb->field[2]);
+		__entry->field3 = le32_to_cpu(trb->field[3]);
+		__entry->trb = (union cdnsp_trb *)trb;
+		__entry->trb_dma = cdnsp_trb_virt_to_dma(ring->deq_seg,
+							 (union cdnsp_trb *)trb);
+
+	),
+	TP_printk("%s: %s trb: %p(%pad)", cdnsp_ring_type_string(__entry->type),
+		  cdnsp_decode_trb(__get_str(str), CDNSP_MSG_MAX,
+				   __entry->field0, __entry->field1,
+				   __entry->field2, __entry->field3),
+				   __entry->trb, &__entry->trb_dma
+	)
+);
+
+DEFINE_EVENT(cdnsp_log_trb, cdnsp_handle_event,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(cdnsp_log_trb, cdnsp_trb_without_td,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(cdnsp_log_trb, cdnsp_handle_command,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(cdnsp_log_trb, cdnsp_handle_transfer,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(cdnsp_log_trb, cdnsp_queue_trb,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(cdnsp_log_trb, cdnsp_cmd_wait_for_compl,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(cdnsp_log_trb, cdnsp_cmd_timeout,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(cdnsp_log_trb, cdnsp_defered_event,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_pdev,
+	TP_PROTO(struct cdnsp_device *pdev),
+	TP_ARGS(pdev),
+	TP_STRUCT__entry(
+		__field(struct cdnsp_device *, pdev)
+		__field(struct usb_gadget *, gadget)
+		__field(dma_addr_t, out_ctx)
+		__field(dma_addr_t, in_ctx)
+		__field(u8, port_num)
+	),
+	TP_fast_assign(
+		__entry->pdev = pdev;
+		__entry->gadget = &pdev->gadget;
+		__entry->in_ctx = pdev->in_ctx.dma;
+		__entry->out_ctx = pdev->out_ctx.dma;
+		__entry->port_num = pdev->active_port ?
+				pdev->active_port->port_num : 0xFF;
+	),
+	TP_printk("pdev %p gadget %p ctx %pad | %pad, port %d ",
+		  __entry->pdev, __entry->gadget, &__entry->in_ctx,
+		  &__entry->out_ctx, __entry->port_num
+	)
+);
+
+DEFINE_EVENT(cdnsp_log_pdev, cdnsp_alloc_priv_device,
+	TP_PROTO(struct cdnsp_device *vdev),
+	TP_ARGS(vdev)
+);
+
+DEFINE_EVENT(cdnsp_log_pdev, cdnsp_free_priv_device,
+	TP_PROTO(struct cdnsp_device *vdev),
+	TP_ARGS(vdev)
+);
+
+DEFINE_EVENT(cdnsp_log_pdev, cdnsp_setup_device,
+	TP_PROTO(struct cdnsp_device *vdev),
+	TP_ARGS(vdev)
+);
+
+DEFINE_EVENT(cdnsp_log_pdev, cdnsp_setup_addressable_priv_device,
+	TP_PROTO(struct cdnsp_device *vdev),
+	TP_ARGS(vdev)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_request,
+	TP_PROTO(struct cdnsp_request *req),
+	TP_ARGS(req),
+	TP_STRUCT__entry(
+		__string(name, req->pep->name)
+		__field(struct usb_request *, request)
+		__field(struct cdnsp_request *, preq)
+		__field(void *, buf)
+		__field(unsigned int, actual)
+		__field(unsigned int, length)
+		__field(int, status)
+		__field(dma_addr_t, dma)
+		__field(unsigned int, stream_id)
+		__field(unsigned int, zero)
+		__field(unsigned int, short_not_ok)
+		__field(unsigned int, no_interrupt)
+		__field(struct scatterlist*, sg)
+		__field(unsigned int, num_sgs)
+		__field(unsigned int, num_mapped_sgs)
+
+	),
+	TP_fast_assign(
+		__assign_str(name, req->pep->name);
+		__entry->request = &req->request;
+		__entry->preq = req;
+		__entry->buf = req->request.buf;
+		__entry->actual = req->request.actual;
+		__entry->length = req->request.length;
+		__entry->status = req->request.status;
+		__entry->dma = req->request.dma;
+		__entry->stream_id = req->request.stream_id;
+		__entry->zero = req->request.zero;
+		__entry->short_not_ok = req->request.short_not_ok;
+		__entry->no_interrupt = req->request.no_interrupt;
+		__entry->sg = req->request.sg;
+		__entry->num_sgs = req->request.num_sgs;
+		__entry->num_mapped_sgs = req->request.num_mapped_sgs;
+	),
+	TP_printk("%s; req U:%p/P:%p, req buf %p, length %u/%u, status %d, "
+		  "buf dma (%pad), SID %u, %s%s%s, sg %p, num_sg %d,"
+		  " num_m_sg %d",
+		  __get_str(name), __entry->request, __entry->preq,
+		  __entry->buf, __entry->actual, __entry->length,
+		  __entry->status, &__entry->dma,
+		  __entry->stream_id, __entry->zero ? "Z" : "z",
+		  __entry->short_not_ok ? "S" : "s",
+		  __entry->no_interrupt ? "I" : "i",
+		  __entry->sg, __entry->num_sgs, __entry->num_mapped_sgs
+		)
+);
+
+DEFINE_EVENT(cdnsp_log_request, cdnsp_request_enqueue,
+	TP_PROTO(struct cdnsp_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdnsp_log_request, cdnsp_request_enqueue_busy,
+	TP_PROTO(struct cdnsp_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdnsp_log_request, cdnsp_request_enqueue_error,
+	TP_PROTO(struct cdnsp_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdnsp_log_request, cdnsp_request_dequeue,
+	TP_PROTO(struct cdnsp_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdnsp_log_request, cdnsp_request_giveback,
+	TP_PROTO(struct cdnsp_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdnsp_log_request, cdnsp_alloc_request,
+	TP_PROTO(struct cdnsp_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdnsp_log_request, cdnsp_free_request,
+	TP_PROTO(struct cdnsp_request *req),
+	TP_ARGS(req)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_ep_ctx,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx),
+	TP_STRUCT__entry(
+		__field(u32, info)
+		__field(u32, info2)
+		__field(u64, deq)
+		__field(u32, tx_info)
+		__dynamic_array(char, str, CDNSP_MSG_MAX)
+	),
+	TP_fast_assign(
+		__entry->info = le32_to_cpu(ctx->ep_info);
+		__entry->info2 = le32_to_cpu(ctx->ep_info2);
+		__entry->deq = le64_to_cpu(ctx->deq);
+		__entry->tx_info = le32_to_cpu(ctx->tx_info);
+	),
+	TP_printk("%s", cdnsp_decode_ep_context(__get_str(str), CDNSP_MSG_MAX,
+						__entry->info, __entry->info2,
+						__entry->deq, __entry->tx_info)
+	)
+);
+
+DEFINE_EVENT(cdnsp_log_ep_ctx, cdnsp_ep_disabled,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_ep_ctx, cdnsp_ep_stopped_or_disabled,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_ep_ctx, cdnsp_remove_request,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_ep_ctx, cdnsp_handle_cmd_stop_ep,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_ep_ctx, cdnsp_handle_cmd_flush_ep,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_ep_ctx, cdnsp_handle_cmd_set_deq_ep,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_ep_ctx, cdnsp_handle_cmd_reset_ep,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_ep_ctx, cdnsp_handle_cmd_config_ep,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_slot_ctx,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx),
+	TP_STRUCT__entry(
+		__field(u32, info)
+		__field(u32, info2)
+		__field(u32, int_target)
+		__field(u32, state)
+	),
+	TP_fast_assign(
+		__entry->info = le32_to_cpu(ctx->dev_info);
+		__entry->info2 = le32_to_cpu(ctx->dev_port);
+		__entry->int_target = le32_to_cpu(ctx->int_target);
+		__entry->state = le32_to_cpu(ctx->dev_state);
+	),
+	TP_printk("%s", cdnsp_decode_slot_context(__entry->info,
+						  __entry->info2,
+						  __entry->int_target,
+						  __entry->state)
+	)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_slot_already_in_default,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_handle_cmd_enable_slot,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_handle_cmd_disable_slot,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_reset_device,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_setup_device_slot,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_handle_cmd_addr_dev,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_handle_cmd_reset_dev,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_handle_cmd_set_deq,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_configure_endpoint,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_td_info,
+	TP_PROTO(struct cdnsp_request *preq),
+	TP_ARGS(preq),
+	TP_STRUCT__entry(
+		__string(name, preq->pep->name)
+		__field(struct usb_request *, request)
+		__field(struct cdnsp_request *, preq)
+		__field(union cdnsp_trb *, first_trb)
+		__field(union cdnsp_trb *, last_trb)
+		__field(dma_addr_t, trb_dma)
+	),
+	TP_fast_assign(
+		__assign_str(name, preq->pep->name);
+		__entry->request = &preq->request;
+		__entry->preq = preq;
+		__entry->first_trb = preq->td.first_trb;
+		__entry->last_trb = preq->td.last_trb;
+		__entry->trb_dma = cdnsp_trb_virt_to_dma(preq->td.start_seg,
+							 preq->td.first_trb)
+	),
+	TP_printk("%s req/preq:  %p/%p, first trb %p[vir]/%pad(dma), last trb %p",
+		  __get_str(name), __entry->request, __entry->preq,
+		  __entry->first_trb, &__entry->trb_dma,
+		  __entry->last_trb
+		)
+);
+
+DEFINE_EVENT(cdnsp_log_td_info, cdnsp_remove_request_td,
+	TP_PROTO(struct cdnsp_request *preq),
+	TP_ARGS(preq)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_ring,
+	TP_PROTO(struct cdnsp_ring *ring),
+	TP_ARGS(ring),
+	TP_STRUCT__entry(
+		__field(u32, type)
+		__field(void *, ring)
+		__field(dma_addr_t, enq)
+		__field(dma_addr_t, deq)
+		__field(dma_addr_t, enq_seg)
+		__field(dma_addr_t, deq_seg)
+		__field(unsigned int, num_segs)
+		__field(unsigned int, stream_id)
+		__field(unsigned int, cycle_state)
+		__field(unsigned int, num_trbs_free)
+		__field(unsigned int, bounce_buf_len)
+	),
+	TP_fast_assign(
+		__entry->ring = ring;
+		__entry->type = ring->type;
+		__entry->num_segs = ring->num_segs;
+		__entry->stream_id = ring->stream_id;
+		__entry->enq_seg = ring->enq_seg->dma;
+		__entry->deq_seg = ring->deq_seg->dma;
+		__entry->cycle_state = ring->cycle_state;
+		__entry->num_trbs_free = ring->num_trbs_free;
+		__entry->bounce_buf_len = ring->bounce_buf_len;
+		__entry->enq = cdnsp_trb_virt_to_dma(ring->enq_seg,
+						     ring->enqueue);
+		__entry->deq = cdnsp_trb_virt_to_dma(ring->deq_seg,
+						     ring->dequeue);
+	),
+	TP_printk("%s %p: enq %pad(%pad) deq %pad(%pad) segs %d stream %d"
+		  " free_trbs %d bounce %d cycle %d",
+		  cdnsp_ring_type_string(__entry->type), __entry->ring,
+		  &__entry->enq, &__entry->enq_seg,
+		  &__entry->deq, &__entry->deq_seg,
+		  __entry->num_segs,
+		  __entry->stream_id,
+		  __entry->num_trbs_free,
+		  __entry->bounce_buf_len,
+		  __entry->cycle_state
+		)
+);
+
+DEFINE_EVENT(cdnsp_log_ring, cdnsp_ring_alloc,
+	TP_PROTO(struct cdnsp_ring *ring),
+	TP_ARGS(ring)
+);
+
+DEFINE_EVENT(cdnsp_log_ring, cdnsp_ring_free,
+	TP_PROTO(struct cdnsp_ring *ring),
+	TP_ARGS(ring)
+);
+
+DEFINE_EVENT(cdnsp_log_ring, cdnsp_set_stream_ring,
+	TP_PROTO(struct cdnsp_ring *ring),
+	TP_ARGS(ring)
+);
+
+DEFINE_EVENT(cdnsp_log_ring, cdnsp_ring_expansion,
+	TP_PROTO(struct cdnsp_ring *ring),
+	TP_ARGS(ring)
+);
+
+DEFINE_EVENT(cdnsp_log_ring, cdnsp_inc_enq,
+	TP_PROTO(struct cdnsp_ring *ring),
+	TP_ARGS(ring)
+);
+
+DEFINE_EVENT(cdnsp_log_ring, cdnsp_inc_deq,
+	TP_PROTO(struct cdnsp_ring *ring),
+	TP_ARGS(ring)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_portsc,
+		TP_PROTO(u32 portnum, u32 portsc),
+		TP_ARGS(portnum, portsc),
+		TP_STRUCT__entry(
+				__field(u32, portnum)
+				__field(u32, portsc)
+				__dynamic_array(char, str, CDNSP_MSG_MAX)
+				),
+		TP_fast_assign(
+				__entry->portnum = portnum;
+				__entry->portsc = portsc;
+				),
+		TP_printk("port-%d: %s",
+			  __entry->portnum,
+			  cdnsp_decode_portsc(__get_str(str), CDNSP_MSG_MAX,
+					      __entry->portsc)
+			)
+);
+
+DEFINE_EVENT(cdnsp_log_portsc, cdnsp_handle_port_status,
+		TP_PROTO(u32 portnum, u32 portsc),
+		TP_ARGS(portnum, portsc)
+);
+
+DEFINE_EVENT(cdnsp_log_portsc, cdnsp_link_state_changed,
+		TP_PROTO(u32 portnum, u32 portsc),
+		TP_ARGS(portnum, portsc)
+);
+
+TRACE_EVENT(cdnsp_stream_number,
+	TP_PROTO(struct cdnsp_ep *pep, int num_stream_ctxs, int num_streams),
+	TP_ARGS(pep, num_stream_ctxs, num_streams),
+	TP_STRUCT__entry(
+		__string(name, pep->name)
+		__field(int, num_stream_ctxs)
+		__field(int, num_streams)
+	),
+	TP_fast_assign(
+		__entry->num_stream_ctxs = num_stream_ctxs;
+		__entry->num_streams = num_streams;
+	),
+	TP_printk("%s Need %u stream ctx entries for %u stream IDs.",
+		  __get_str(name), __entry->num_stream_ctxs,
+		  __entry->num_streams)
+);
+
+#endif /* __CDNSP_TRACE_H */
+
+/* this part must be outside header guard */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE cdnsp-trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
new file mode 100644
index 000000000..7b20d2d5c
--- /dev/null
+++ b/drivers/usb/cdns3/core.c
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS and USBSSP DRD Driver.
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ * Copyright (C) 2017-2018 NXP
+ * Copyright (C) 2019 Texas Instruments
+ *
+ * Author: Peter Chen <peter.chen@nxp.com>
+ *         Pawel Laszczak <pawell@cadence.com>
+ *         Roger Quadros <rogerq@ti.com>
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+
+#include "core.h"
+#include "host-export.h"
+#include "drd.h"
+
+static int cdns_idle_init(struct cdns *cdns);
+
+static int cdns_role_start(struct cdns *cdns, enum usb_role role)
+{
+	int ret;
+
+	if (WARN_ON(role > USB_ROLE_DEVICE))
+		return 0;
+
+	mutex_lock(&cdns->mutex);
+	cdns->role = role;
+	mutex_unlock(&cdns->mutex);
+
+	if (!cdns->roles[role])
+		return -ENXIO;
+
+	if (cdns->roles[role]->state == CDNS_ROLE_STATE_ACTIVE)
+		return 0;
+
+	mutex_lock(&cdns->mutex);
+	ret = cdns->roles[role]->start(cdns);
+	if (!ret)
+		cdns->roles[role]->state = CDNS_ROLE_STATE_ACTIVE;
+	mutex_unlock(&cdns->mutex);
+
+	return ret;
+}
+
+static void cdns_role_stop(struct cdns *cdns)
+{
+	enum usb_role role = cdns->role;
+
+	if (WARN_ON(role > USB_ROLE_DEVICE))
+		return;
+
+	if (cdns->roles[role]->state == CDNS_ROLE_STATE_INACTIVE)
+		return;
+
+	mutex_lock(&cdns->mutex);
+	cdns->roles[role]->stop(cdns);
+	cdns->roles[role]->state = CDNS_ROLE_STATE_INACTIVE;
+	mutex_unlock(&cdns->mutex);
+}
+
+static void cdns_exit_roles(struct cdns *cdns)
+{
+	cdns_role_stop(cdns);
+	cdns_drd_exit(cdns);
+}
+
+/**
+ * cdns_core_init_role - initialize role of operation
+ * @cdns: Pointer to cdns structure
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+static int cdns_core_init_role(struct cdns *cdns)
+{
+	struct device *dev = cdns->dev;
+	enum usb_dr_mode best_dr_mode;
+	enum usb_dr_mode dr_mode;
+	int ret;
+
+	dr_mode = usb_get_dr_mode(dev);
+	cdns->role = USB_ROLE_NONE;
+
+	/*
+	 * If driver can't read mode by means of usb_get_dr_mode function then
+	 * chooses mode according with Kernel configuration. This setting
+	 * can be restricted later depending on strap pin configuration.
+	 */
+	if (dr_mode == USB_DR_MODE_UNKNOWN) {
+		if (cdns->version == CDNSP_CONTROLLER_V2) {
+			if (IS_ENABLED(CONFIG_USB_CDNSP_HOST) &&
+			    IS_ENABLED(CONFIG_USB_CDNSP_GADGET))
+				dr_mode = USB_DR_MODE_OTG;
+			else if (IS_ENABLED(CONFIG_USB_CDNSP_HOST))
+				dr_mode = USB_DR_MODE_HOST;
+			else if (IS_ENABLED(CONFIG_USB_CDNSP_GADGET))
+				dr_mode = USB_DR_MODE_PERIPHERAL;
+		} else {
+			if (IS_ENABLED(CONFIG_USB_CDNS3_HOST) &&
+			    IS_ENABLED(CONFIG_USB_CDNS3_GADGET))
+				dr_mode = USB_DR_MODE_OTG;
+			else if (IS_ENABLED(CONFIG_USB_CDNS3_HOST))
+				dr_mode = USB_DR_MODE_HOST;
+			else if (IS_ENABLED(CONFIG_USB_CDNS3_GADGET))
+				dr_mode = USB_DR_MODE_PERIPHERAL;
+		}
+	}
+
+	/*
+	 * At this point cdns->dr_mode contains strap configuration.
+	 * Driver try update this setting considering kernel configuration
+	 */
+	best_dr_mode = cdns->dr_mode;
+
+	ret = cdns_idle_init(cdns);
+	if (ret)
+		return ret;
+
+	if (dr_mode == USB_DR_MODE_OTG) {
+		best_dr_mode = cdns->dr_mode;
+	} else if (cdns->dr_mode == USB_DR_MODE_OTG) {
+		best_dr_mode = dr_mode;
+	} else if (cdns->dr_mode != dr_mode) {
+		dev_err(dev, "Incorrect DRD configuration\n");
+		return -EINVAL;
+	}
+
+	dr_mode = best_dr_mode;
+
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
+		if ((cdns->version == CDNSP_CONTROLLER_V2 &&
+		     IS_ENABLED(CONFIG_USB_CDNSP_HOST)) ||
+		    (cdns->version < CDNSP_CONTROLLER_V2 &&
+		     IS_ENABLED(CONFIG_USB_CDNS3_HOST)))
+			ret = cdns_host_init(cdns);
+		else
+			ret = -ENXIO;
+
+		if (ret) {
+			dev_err(dev, "Host initialization failed with %d\n",
+				ret);
+			goto err;
+		}
+	}
+
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
+		if (cdns->gadget_init)
+			ret = cdns->gadget_init(cdns);
+		else
+			ret = -ENXIO;
+
+		if (ret) {
+			dev_err(dev, "Device initialization failed with %d\n",
+				ret);
+			goto err;
+		}
+	}
+
+	cdns->dr_mode = dr_mode;
+
+	ret = cdns_drd_update_mode(cdns);
+	if (ret)
+		goto err;
+
+	/* Initialize idle role to start with */
+	ret = cdns_role_start(cdns, USB_ROLE_NONE);
+	if (ret)
+		goto err;
+
+	switch (cdns->dr_mode) {
+	case USB_DR_MODE_OTG:
+		ret = cdns_hw_role_switch(cdns);
+		if (ret)
+			goto err;
+		break;
+	case USB_DR_MODE_PERIPHERAL:
+		ret = cdns_role_start(cdns, USB_ROLE_DEVICE);
+		if (ret)
+			goto err;
+		break;
+	case USB_DR_MODE_HOST:
+		ret = cdns_role_start(cdns, USB_ROLE_HOST);
+		if (ret)
+			goto err;
+		break;
+	default:
+		ret = -EINVAL;
+		goto err;
+	}
+
+	return 0;
+err:
+	cdns_exit_roles(cdns);
+	return ret;
+}
+
+/**
+ * cdns_hw_role_state_machine  - role switch state machine based on hw events.
+ * @cdns: Pointer to controller structure.
+ *
+ * Returns next role to be entered based on hw events.
+ */
+static enum usb_role cdns_hw_role_state_machine(struct cdns *cdns)
+{
+	enum usb_role role = USB_ROLE_NONE;
+	int id, vbus;
+
+	if (cdns->dr_mode != USB_DR_MODE_OTG) {
+		if (cdns_is_host(cdns))
+			role = USB_ROLE_HOST;
+		if (cdns_is_device(cdns))
+			role = USB_ROLE_DEVICE;
+
+		return role;
+	}
+
+	id = cdns_get_id(cdns);
+	vbus = cdns_get_vbus(cdns);
+
+	/*
+	 * Role change state machine
+	 * Inputs: ID, VBUS
+	 * Previous state: cdns->role
+	 * Next state: role
+	 */
+	role = cdns->role;
+
+	switch (role) {
+	case USB_ROLE_NONE:
+		/*
+		 * Driver treats USB_ROLE_NONE synonymous to IDLE state from
+		 * controller specification.
+		 */
+		if (!id)
+			role = USB_ROLE_HOST;
+		else if (vbus)
+			role = USB_ROLE_DEVICE;
+		break;
+	case USB_ROLE_HOST: /* from HOST, we can only change to NONE */
+		if (id)
+			role = USB_ROLE_NONE;
+		break;
+	case USB_ROLE_DEVICE: /* from GADGET, we can only change to NONE*/
+		if (!vbus)
+			role = USB_ROLE_NONE;
+		break;
+	}
+
+	dev_dbg(cdns->dev, "role %d -> %d\n", cdns->role, role);
+
+	return role;
+}
+
+static int cdns_idle_role_start(struct cdns *cdns)
+{
+	return 0;
+}
+
+static void cdns_idle_role_stop(struct cdns *cdns)
+{
+	/* Program Lane swap and bring PHY out of RESET */
+	phy_reset(cdns->usb3_phy);
+}
+
+static int cdns_idle_init(struct cdns *cdns)
+{
+	struct cdns_role_driver *rdrv;
+
+	rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
+	if (!rdrv)
+		return -ENOMEM;
+
+	rdrv->start = cdns_idle_role_start;
+	rdrv->stop = cdns_idle_role_stop;
+	rdrv->state = CDNS_ROLE_STATE_INACTIVE;
+	rdrv->suspend = NULL;
+	rdrv->resume = NULL;
+	rdrv->name = "idle";
+
+	cdns->roles[USB_ROLE_NONE] = rdrv;
+
+	return 0;
+}
+
+/**
+ * cdns_hw_role_switch - switch roles based on HW state
+ * @cdns: controller
+ */
+int cdns_hw_role_switch(struct cdns *cdns)
+{
+	enum usb_role real_role, current_role;
+	int ret = 0;
+
+	/* Depends on role switch class */
+	if (cdns->role_sw)
+		return 0;
+
+	pm_runtime_get_sync(cdns->dev);
+
+	current_role = cdns->role;
+	real_role = cdns_hw_role_state_machine(cdns);
+
+	/* Do nothing if nothing changed */
+	if (current_role == real_role)
+		goto exit;
+
+	cdns_role_stop(cdns);
+
+	dev_dbg(cdns->dev, "Switching role %d -> %d", current_role, real_role);
+
+	ret = cdns_role_start(cdns, real_role);
+	if (ret) {
+		/* Back to current role */
+		dev_err(cdns->dev, "set %d has failed, back to %d\n",
+			real_role, current_role);
+		ret = cdns_role_start(cdns, current_role);
+		if (ret)
+			dev_err(cdns->dev, "back to %d failed too\n",
+				current_role);
+	}
+exit:
+	pm_runtime_put_sync(cdns->dev);
+	return ret;
+}
+
+/**
+ * cdns_role_get - get current role of controller.
+ *
+ * @sw: pointer to USB role switch structure
+ *
+ * Returns role
+ */
+static enum usb_role cdns_role_get(struct usb_role_switch *sw)
+{
+	struct cdns *cdns = usb_role_switch_get_drvdata(sw);
+
+	return cdns->role;
+}
+
+/**
+ * cdns_role_set - set current role of controller.
+ *
+ * @sw: pointer to USB role switch structure
+ * @role: the previous role
+ * Handles below events:
+ * - Role switch for dual-role devices
+ * - USB_ROLE_GADGET <--> USB_ROLE_NONE for peripheral-only devices
+ */
+static int cdns_role_set(struct usb_role_switch *sw, enum usb_role role)
+{
+	struct cdns *cdns = usb_role_switch_get_drvdata(sw);
+	int ret = 0;
+
+	pm_runtime_get_sync(cdns->dev);
+
+	if (cdns->role == role)
+		goto pm_put;
+
+	if (cdns->dr_mode == USB_DR_MODE_HOST) {
+		switch (role) {
+		case USB_ROLE_NONE:
+		case USB_ROLE_HOST:
+			break;
+		default:
+			goto pm_put;
+		}
+	}
+
+	if (cdns->dr_mode == USB_DR_MODE_PERIPHERAL) {
+		switch (role) {
+		case USB_ROLE_NONE:
+		case USB_ROLE_DEVICE:
+			break;
+		default:
+			goto pm_put;
+		}
+	}
+
+	cdns_role_stop(cdns);
+	ret = cdns_role_start(cdns, role);
+	if (ret)
+		dev_err(cdns->dev, "set role %d has failed\n", role);
+
+pm_put:
+	pm_runtime_put_sync(cdns->dev);
+	return ret;
+}
+
+
+/**
+ * cdns_wakeup_irq - interrupt handler for wakeup events
+ * @irq: irq number for cdns3/cdnsp core device
+ * @data: structure of cdns
+ *
+ * Returns IRQ_HANDLED or IRQ_NONE
+ */
+static irqreturn_t cdns_wakeup_irq(int irq, void *data)
+{
+	struct cdns *cdns = data;
+
+	if (cdns->in_lpm) {
+		disable_irq_nosync(irq);
+		cdns->wakeup_pending = true;
+		if ((cdns->role == USB_ROLE_HOST) && cdns->host_dev)
+			pm_request_resume(&cdns->host_dev->dev);
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+/**
+ * cdns_init - probe for cdns3/cdnsp core device
+ * @cdns: Pointer to cdns structure.
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns_init(struct cdns *cdns)
+{
+	struct device *dev = cdns->dev;
+	int ret;
+
+	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(dev, "error setting dma mask: %d\n", ret);
+		return ret;
+	}
+
+	mutex_init(&cdns->mutex);
+
+	if (device_property_read_bool(dev, "usb-role-switch")) {
+		struct usb_role_switch_desc sw_desc = { };
+
+		sw_desc.set = cdns_role_set;
+		sw_desc.get = cdns_role_get;
+		sw_desc.allow_userspace_control = true;
+		sw_desc.driver_data = cdns;
+		sw_desc.fwnode = dev->fwnode;
+
+		cdns->role_sw = usb_role_switch_register(dev, &sw_desc);
+		if (IS_ERR(cdns->role_sw)) {
+			dev_warn(dev, "Unable to register Role Switch\n");
+			return PTR_ERR(cdns->role_sw);
+		}
+	}
+
+	if (cdns->wakeup_irq) {
+		ret = devm_request_irq(cdns->dev, cdns->wakeup_irq,
+						cdns_wakeup_irq,
+						IRQF_SHARED,
+						dev_name(cdns->dev), cdns);
+
+		if (ret) {
+			dev_err(cdns->dev, "couldn't register wakeup irq handler\n");
+			goto role_switch_unregister;
+		}
+	}
+
+	ret = cdns_drd_init(cdns);
+	if (ret)
+		goto init_failed;
+
+	ret = cdns_core_init_role(cdns);
+	if (ret)
+		goto init_failed;
+
+	spin_lock_init(&cdns->lock);
+
+	dev_dbg(dev, "Cadence USB3 core: probe succeed\n");
+
+	return 0;
+init_failed:
+	cdns_drd_exit(cdns);
+role_switch_unregister:
+	if (cdns->role_sw)
+		usb_role_switch_unregister(cdns->role_sw);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cdns_init);
+
+/**
+ * cdns_remove - unbind drd driver and clean up
+ * @cdns: Pointer to cdns structure.
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns_remove(struct cdns *cdns)
+{
+	cdns_exit_roles(cdns);
+	usb_role_switch_unregister(cdns->role_sw);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cdns_remove);
+
+#ifdef CONFIG_PM_SLEEP
+int cdns_suspend(struct cdns *cdns)
+{
+	struct device *dev = cdns->dev;
+	unsigned long flags;
+
+	if (pm_runtime_status_suspended(dev))
+		pm_runtime_resume(dev);
+
+	if (cdns->roles[cdns->role]->suspend) {
+		spin_lock_irqsave(&cdns->lock, flags);
+		cdns->roles[cdns->role]->suspend(cdns, false);
+		spin_unlock_irqrestore(&cdns->lock, flags);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cdns_suspend);
+
+int cdns_resume(struct cdns *cdns)
+{
+	enum usb_role real_role;
+	bool role_changed = false;
+	int ret = 0;
+
+	if (cdns_power_is_lost(cdns)) {
+		if (cdns->role_sw) {
+			cdns->role = cdns_role_get(cdns->role_sw);
+		} else {
+			real_role = cdns_hw_role_state_machine(cdns);
+			if (real_role != cdns->role) {
+				ret = cdns_hw_role_switch(cdns);
+				if (ret)
+					return ret;
+				role_changed = true;
+			}
+		}
+
+		if (!role_changed) {
+			if (cdns->role == USB_ROLE_HOST)
+				ret = cdns_drd_host_on(cdns);
+			else if (cdns->role == USB_ROLE_DEVICE)
+				ret = cdns_drd_gadget_on(cdns);
+
+			if (ret)
+				return ret;
+		}
+	}
+
+	if (cdns->roles[cdns->role]->resume)
+		cdns->roles[cdns->role]->resume(cdns, cdns_power_is_lost(cdns));
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cdns_resume);
+
+void cdns_set_active(struct cdns *cdns, u8 set_active)
+{
+	struct device *dev = cdns->dev;
+
+	if (set_active) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return;
+}
+EXPORT_SYMBOL_GPL(cdns_set_active);
+#endif /* CONFIG_PM_SLEEP */
+
+MODULE_AUTHOR("Peter Chen <peter.chen@nxp.com>");
+MODULE_AUTHOR("Pawel Laszczak <pawell@cadence.com>");
+MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
+MODULE_DESCRIPTION("Cadence USBSS and USBSSP DRD Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
new file mode 100644
index 000000000..81a9c9d6b
--- /dev/null
+++ b/drivers/usb/cdns3/core.h
@@ -0,0 +1,138 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence USBSS and USBSSP DRD Header File.
+ *
+ * Copyright (C) 2017-2018 NXP
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Authors: Peter Chen <peter.chen@nxp.com>
+ *          Pawel Laszczak <pawell@cadence.com>
+ */
+#ifndef __LINUX_CDNS3_CORE_H
+#define __LINUX_CDNS3_CORE_H
+
+#include <linux/usb/otg.h>
+#include <linux/usb/role.h>
+
+struct cdns;
+
+/**
+ * struct cdns_role_driver - host/gadget role driver
+ * @start: start this role
+ * @stop: stop this role
+ * @suspend: suspend callback for this role
+ * @resume: resume callback for this role
+ * @irq: irq handler for this role
+ * @name: role name string (host/gadget)
+ * @state: current state
+ */
+struct cdns_role_driver {
+	int (*start)(struct cdns *cdns);
+	void (*stop)(struct cdns *cdns);
+	int (*suspend)(struct cdns *cdns, bool do_wakeup);
+	int (*resume)(struct cdns *cdns, bool hibernated);
+	const char *name;
+#define CDNS_ROLE_STATE_INACTIVE	0
+#define CDNS_ROLE_STATE_ACTIVE		1
+	int state;
+};
+
+#define CDNS_XHCI_RESOURCES_NUM	2
+
+struct cdns3_platform_data {
+	int (*platform_suspend)(struct device *dev,
+			bool suspend, bool wakeup);
+	unsigned long quirks;
+#define CDNS3_DEFAULT_PM_RUNTIME_ALLOW	BIT(0)
+};
+
+/**
+ * struct cdns - Representation of Cadence USB3 DRD controller.
+ * @dev: pointer to Cadence device struct
+ * @xhci_regs: pointer to base of xhci registers
+ * @xhci_res: the resource for xhci
+ * @dev_regs: pointer to base of dev registers
+ * @otg_res: the resource for otg
+ * @otg_v0_regs: pointer to base of v0 otg registers
+ * @otg_v1_regs: pointer to base of v1 otg registers
+ * @otg_cdnsp_regs: pointer to base of CDNSP otg registers
+ * @otg_regs: pointer to base of otg registers
+ * @otg_irq_regs: pointer to interrupt registers
+ * @otg_irq: irq number for otg controller
+ * @dev_irq: irq number for device controller
+ * @wakeup_irq: irq number for wakeup event, it is optional
+ * @roles: array of supported roles for this controller
+ * @role: current role
+ * @host_dev: the child host device pointer for cdns core
+ * @gadget_dev: the child gadget device pointer
+ * @usb2_phy: pointer to USB2 PHY
+ * @usb3_phy: pointer to USB3 PHY
+ * @mutex: the mutex for concurrent code at driver
+ * @dr_mode: supported mode of operation it can be only Host, only Device
+ *           or OTG mode that allow to switch between Device and Host mode.
+ *           This field based on firmware setting, kernel configuration
+ *           and hardware configuration.
+ * @role_sw: pointer to role switch object.
+ * @in_lpm: indicate the controller is in low power mode
+ * @wakeup_pending: wakeup interrupt pending
+ * @pdata: platform data from glue layer
+ * @lock: spinlock structure
+ * @xhci_plat_data: xhci private data structure pointer
+ * @gadget_init: pointer to gadget initialization function
+ */
+struct cdns {
+	struct device			*dev;
+	void __iomem			*xhci_regs;
+	struct resource			xhci_res[CDNS_XHCI_RESOURCES_NUM];
+	struct cdns3_usb_regs __iomem	*dev_regs;
+
+	struct resource				otg_res;
+	struct cdns3_otg_legacy_regs __iomem	*otg_v0_regs;
+	struct cdns3_otg_regs __iomem		*otg_v1_regs;
+	struct cdnsp_otg_regs __iomem		*otg_cdnsp_regs;
+	struct cdns_otg_common_regs __iomem	*otg_regs;
+	struct cdns_otg_irq_regs __iomem	*otg_irq_regs;
+#define CDNS3_CONTROLLER_V0	0
+#define CDNS3_CONTROLLER_V1	1
+#define CDNSP_CONTROLLER_V2	2
+	u32				version;
+	bool				phyrst_a_enable;
+
+	int				otg_irq;
+	int				dev_irq;
+	int				wakeup_irq;
+	struct cdns_role_driver	*roles[USB_ROLE_DEVICE + 1];
+	enum usb_role			role;
+	struct platform_device		*host_dev;
+	void				*gadget_dev;
+	struct phy			*usb2_phy;
+	struct phy			*usb3_phy;
+	/* mutext used in workqueue*/
+	struct mutex			mutex;
+	enum usb_dr_mode		dr_mode;
+	struct usb_role_switch		*role_sw;
+	bool				in_lpm;
+	bool				wakeup_pending;
+	struct cdns3_platform_data	*pdata;
+	spinlock_t			lock;
+	struct xhci_plat_priv		*xhci_plat_data;
+
+	int (*gadget_init)(struct cdns *cdns);
+};
+
+int cdns_hw_role_switch(struct cdns *cdns);
+int cdns_init(struct cdns *cdns);
+int cdns_remove(struct cdns *cdns);
+
+#ifdef CONFIG_PM_SLEEP
+int cdns_resume(struct cdns *cdns);
+int cdns_suspend(struct cdns *cdns);
+void cdns_set_active(struct cdns *cdns, u8 set_active);
+#else /* CONFIG_PM_SLEEP */
+static inline int cdns_resume(struct cdns *cdns)
+{ return 0; }
+static inline void cdns_set_active(struct cdns *cdns, u8 set_active) { }
+static inline int cdns_suspend(struct cdns *cdns)
+{ return 0; }
+#endif /* CONFIG_PM_SLEEP */
+#endif /* __LINUX_CDNS3_CORE_H */
diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c
new file mode 100644
index 000000000..d00ff98df
--- /dev/null
+++ b/drivers/usb/cdns3/drd.c
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS and USBSSP DRD Driver.
+ *
+ * Copyright (C) 2018-2020 Cadence.
+ * Copyright (C) 2019 Texas Instruments
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *         Roger Quadros <rogerq@ti.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/usb/otg.h>
+
+#include "drd.h"
+#include "core.h"
+
+/**
+ * cdns_set_mode - change mode of OTG Core
+ * @cdns: pointer to context structure
+ * @mode: selected mode from cdns_role
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+static int cdns_set_mode(struct cdns *cdns, enum usb_dr_mode mode)
+{
+	void __iomem  *override_reg;
+	u32 reg;
+
+	switch (mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		break;
+	case USB_DR_MODE_HOST:
+		break;
+	case USB_DR_MODE_OTG:
+		dev_dbg(cdns->dev, "Set controller to OTG mode\n");
+
+		if (cdns->version == CDNSP_CONTROLLER_V2)
+			override_reg = &cdns->otg_cdnsp_regs->override;
+		else if (cdns->version == CDNS3_CONTROLLER_V1)
+			override_reg = &cdns->otg_v1_regs->override;
+		else
+			override_reg = &cdns->otg_v0_regs->ctrl1;
+
+		reg = readl(override_reg);
+
+		if (cdns->version != CDNS3_CONTROLLER_V0)
+			reg |= OVERRIDE_IDPULLUP;
+		else
+			reg |= OVERRIDE_IDPULLUP_V0;
+
+		writel(reg, override_reg);
+
+		if (cdns->version == CDNS3_CONTROLLER_V1) {
+			/*
+			 * Enable work around feature built into the
+			 * controller to address issue with RX Sensitivity
+			 * est (EL_17) for USB2 PHY. The issue only occures
+			 * for 0x0002450D controller version.
+			 */
+			if (cdns->phyrst_a_enable) {
+				reg = readl(&cdns->otg_v1_regs->phyrst_cfg);
+				reg |= PHYRST_CFG_PHYRST_A_ENABLE;
+				writel(reg, &cdns->otg_v1_regs->phyrst_cfg);
+			}
+		}
+
+		/*
+		 * Hardware specification says: "ID_VALUE must be valid within
+		 * 50ms after idpullup is set to '1" so driver must wait
+		 * 50ms before reading this pin.
+		 */
+		usleep_range(50000, 60000);
+		break;
+	default:
+		dev_err(cdns->dev, "Unsupported mode of operation %d\n", mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int cdns_get_id(struct cdns *cdns)
+{
+	int id;
+
+	id = readl(&cdns->otg_regs->sts) & OTGSTS_ID_VALUE;
+	dev_dbg(cdns->dev, "OTG ID: %d", id);
+
+	return id;
+}
+
+int cdns_get_vbus(struct cdns *cdns)
+{
+	int vbus;
+
+	vbus = !!(readl(&cdns->otg_regs->sts) & OTGSTS_VBUS_VALID);
+	dev_dbg(cdns->dev, "OTG VBUS: %d", vbus);
+
+	return vbus;
+}
+
+void cdns_clear_vbus(struct cdns *cdns)
+{
+	u32 reg;
+
+	if (cdns->version != CDNSP_CONTROLLER_V2)
+		return;
+
+	reg = readl(&cdns->otg_cdnsp_regs->override);
+	reg |= OVERRIDE_SESS_VLD_SEL;
+	writel(reg, &cdns->otg_cdnsp_regs->override);
+}
+EXPORT_SYMBOL_GPL(cdns_clear_vbus);
+
+void cdns_set_vbus(struct cdns *cdns)
+{
+	u32 reg;
+
+	if (cdns->version != CDNSP_CONTROLLER_V2)
+		return;
+
+	reg = readl(&cdns->otg_cdnsp_regs->override);
+	reg &= ~OVERRIDE_SESS_VLD_SEL;
+	writel(reg, &cdns->otg_cdnsp_regs->override);
+}
+EXPORT_SYMBOL_GPL(cdns_set_vbus);
+
+bool cdns_is_host(struct cdns *cdns)
+{
+	if (cdns->dr_mode == USB_DR_MODE_HOST)
+		return true;
+	else if (cdns_get_id(cdns) == CDNS3_ID_HOST)
+		return true;
+
+	return false;
+}
+
+bool cdns_is_device(struct cdns *cdns)
+{
+	if (cdns->dr_mode == USB_DR_MODE_PERIPHERAL)
+		return true;
+	else if (cdns->dr_mode == USB_DR_MODE_OTG)
+		if (cdns_get_id(cdns) == CDNS3_ID_PERIPHERAL)
+			return true;
+
+	return false;
+}
+
+/**
+ * cdns_otg_disable_irq - Disable all OTG interrupts
+ * @cdns: Pointer to controller context structure
+ */
+static void cdns_otg_disable_irq(struct cdns *cdns)
+{
+	writel(0, &cdns->otg_irq_regs->ien);
+}
+
+/**
+ * cdns_otg_enable_irq - enable id and sess_valid interrupts
+ * @cdns: Pointer to controller context structure
+ */
+static void cdns_otg_enable_irq(struct cdns *cdns)
+{
+	writel(OTGIEN_ID_CHANGE_INT | OTGIEN_VBUSVALID_RISE_INT |
+	       OTGIEN_VBUSVALID_FALL_INT, &cdns->otg_irq_regs->ien);
+}
+
+/**
+ * cdns_drd_host_on - start host.
+ * @cdns: Pointer to controller context structure.
+ *
+ * Returns 0 on success otherwise negative errno.
+ */
+int cdns_drd_host_on(struct cdns *cdns)
+{
+	u32 val, ready_bit;
+	int ret;
+
+	/* Enable host mode. */
+	writel(OTGCMD_HOST_BUS_REQ | OTGCMD_OTG_DIS,
+	       &cdns->otg_regs->cmd);
+
+	if (cdns->version == CDNSP_CONTROLLER_V2)
+		ready_bit = OTGSTS_CDNSP_XHCI_READY;
+	else
+		ready_bit = OTGSTS_CDNS3_XHCI_READY;
+
+	dev_dbg(cdns->dev, "Waiting till Host mode is turned on\n");
+	ret = readl_poll_timeout_atomic(&cdns->otg_regs->sts, val,
+					val & ready_bit, 1, 100000);
+
+	if (ret)
+		dev_err(cdns->dev, "timeout waiting for xhci_ready\n");
+
+	phy_set_mode(cdns->usb3_phy, PHY_MODE_USB_HOST);
+	return ret;
+}
+
+/**
+ * cdns_drd_host_off - stop host.
+ * @cdns: Pointer to controller context structure.
+ */
+void cdns_drd_host_off(struct cdns *cdns)
+{
+	u32 val;
+
+	writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP |
+	       OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF,
+	       &cdns->otg_regs->cmd);
+
+	/* Waiting till H_IDLE state.*/
+	readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
+				  !(val & OTGSTATE_HOST_STATE_MASK),
+				  1, 2000000);
+	phy_set_mode(cdns->usb3_phy, PHY_MODE_INVALID);
+}
+
+/**
+ * cdns_drd_gadget_on - start gadget.
+ * @cdns: Pointer to controller context structure.
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns_drd_gadget_on(struct cdns *cdns)
+{
+	u32 reg = OTGCMD_OTG_DIS;
+	u32 ready_bit;
+	int ret, val;
+
+	/* switch OTG core */
+	writel(OTGCMD_DEV_BUS_REQ | reg, &cdns->otg_regs->cmd);
+
+	dev_dbg(cdns->dev, "Waiting till Device mode is turned on\n");
+
+	if (cdns->version == CDNSP_CONTROLLER_V2)
+		ready_bit = OTGSTS_CDNSP_DEV_READY;
+	else
+		ready_bit = OTGSTS_CDNS3_DEV_READY;
+
+	ret = readl_poll_timeout_atomic(&cdns->otg_regs->sts, val,
+					val & ready_bit, 1, 100000);
+	if (ret) {
+		dev_err(cdns->dev, "timeout waiting for dev_ready\n");
+		return ret;
+	}
+
+	phy_set_mode(cdns->usb3_phy, PHY_MODE_USB_DEVICE);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cdns_drd_gadget_on);
+
+/**
+ * cdns_drd_gadget_off - stop gadget.
+ * @cdns: Pointer to controller context structure.
+ */
+void cdns_drd_gadget_off(struct cdns *cdns)
+{
+	u32 val;
+
+	/*
+	 * Driver should wait at least 10us after disabling Device
+	 * before turning-off Device (DEV_BUS_DROP).
+	 */
+	usleep_range(20, 30);
+	writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP |
+	       OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF,
+	       &cdns->otg_regs->cmd);
+	/* Waiting till DEV_IDLE state.*/
+	readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
+				  !(val & OTGSTATE_DEV_STATE_MASK),
+				  1, 2000000);
+	phy_set_mode(cdns->usb3_phy, PHY_MODE_INVALID);
+}
+EXPORT_SYMBOL_GPL(cdns_drd_gadget_off);
+
+/**
+ * cdns_init_otg_mode - initialize drd controller
+ * @cdns: Pointer to controller context structure
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+static int cdns_init_otg_mode(struct cdns *cdns)
+{
+	int ret;
+
+	cdns_otg_disable_irq(cdns);
+	/* clear all interrupts */
+	writel(~0, &cdns->otg_irq_regs->ivect);
+
+	ret = cdns_set_mode(cdns, USB_DR_MODE_OTG);
+	if (ret)
+		return ret;
+
+	cdns_otg_enable_irq(cdns);
+
+	return 0;
+}
+
+/**
+ * cdns_drd_update_mode - initialize mode of operation
+ * @cdns: Pointer to controller context structure
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns_drd_update_mode(struct cdns *cdns)
+{
+	int ret;
+
+	switch (cdns->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		ret = cdns_set_mode(cdns, USB_DR_MODE_PERIPHERAL);
+		break;
+	case USB_DR_MODE_HOST:
+		ret = cdns_set_mode(cdns, USB_DR_MODE_HOST);
+		break;
+	case USB_DR_MODE_OTG:
+		ret = cdns_init_otg_mode(cdns);
+		break;
+	default:
+		dev_err(cdns->dev, "Unsupported mode of operation %d\n",
+			cdns->dr_mode);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static irqreturn_t cdns_drd_thread_irq(int irq, void *data)
+{
+	struct cdns *cdns = data;
+
+	cdns_hw_role_switch(cdns);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * cdns_drd_irq - interrupt handler for OTG events
+ *
+ * @irq: irq number for cdns core device
+ * @data: structure of cdns
+ *
+ * Returns IRQ_HANDLED or IRQ_NONE
+ */
+static irqreturn_t cdns_drd_irq(int irq, void *data)
+{
+	irqreturn_t ret = IRQ_NONE;
+	struct cdns *cdns = data;
+	u32 reg;
+
+	if (cdns->dr_mode != USB_DR_MODE_OTG)
+		return IRQ_NONE;
+
+	if (cdns->in_lpm)
+		return ret;
+
+	reg = readl(&cdns->otg_irq_regs->ivect);
+
+	if (!reg)
+		return IRQ_NONE;
+
+	if (reg & OTGIEN_ID_CHANGE_INT) {
+		dev_dbg(cdns->dev, "OTG IRQ: new ID: %d\n",
+			cdns_get_id(cdns));
+
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	if (reg & (OTGIEN_VBUSVALID_RISE_INT | OTGIEN_VBUSVALID_FALL_INT)) {
+		dev_dbg(cdns->dev, "OTG IRQ: new VBUS: %d\n",
+			cdns_get_vbus(cdns));
+
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	writel(~0, &cdns->otg_irq_regs->ivect);
+	return ret;
+}
+
+int cdns_drd_init(struct cdns *cdns)
+{
+	void __iomem *regs;
+	u32 state;
+	int ret;
+
+	regs = devm_ioremap_resource(cdns->dev, &cdns->otg_res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	/* Detection of DRD version. Controller has been released
+	 * in three versions. All are very similar and are software compatible,
+	 * but they have same changes in register maps.
+	 * The first register in oldest version is command register and it's
+	 * read only. Driver should read 0 from it. On the other hand, in v1
+	 * and v2 the first register contains device ID number which is not
+	 * set to 0. Driver uses this fact to detect the proper version of
+	 * controller.
+	 */
+	cdns->otg_v0_regs = regs;
+	if (!readl(&cdns->otg_v0_regs->cmd)) {
+		cdns->version  = CDNS3_CONTROLLER_V0;
+		cdns->otg_v1_regs = NULL;
+		cdns->otg_cdnsp_regs = NULL;
+		cdns->otg_regs = regs;
+		cdns->otg_irq_regs = (struct cdns_otg_irq_regs __iomem  *)
+				     &cdns->otg_v0_regs->ien;
+		writel(1, &cdns->otg_v0_regs->simulate);
+		dev_dbg(cdns->dev, "DRD version v0 (%08x)\n",
+			 readl(&cdns->otg_v0_regs->version));
+	} else {
+		cdns->otg_v0_regs = NULL;
+		cdns->otg_v1_regs = regs;
+		cdns->otg_cdnsp_regs = regs;
+
+		cdns->otg_regs = (void __iomem *)&cdns->otg_v1_regs->cmd;
+
+		if (readl(&cdns->otg_cdnsp_regs->did) == OTG_CDNSP_DID) {
+			cdns->otg_irq_regs = (struct cdns_otg_irq_regs __iomem *)
+					      &cdns->otg_cdnsp_regs->ien;
+			cdns->version  = CDNSP_CONTROLLER_V2;
+		} else {
+			cdns->otg_irq_regs = (struct cdns_otg_irq_regs __iomem *)
+					      &cdns->otg_v1_regs->ien;
+			writel(1, &cdns->otg_v1_regs->simulate);
+			cdns->version  = CDNS3_CONTROLLER_V1;
+		}
+
+		dev_dbg(cdns->dev, "DRD version v1 (ID: %08x, rev: %08x)\n",
+			 readl(&cdns->otg_v1_regs->did),
+			 readl(&cdns->otg_v1_regs->rid));
+	}
+
+	state = OTGSTS_STRAP(readl(&cdns->otg_regs->sts));
+
+	/* Update dr_mode according to STRAP configuration. */
+	cdns->dr_mode = USB_DR_MODE_OTG;
+
+	if ((cdns->version == CDNSP_CONTROLLER_V2 &&
+	     state == OTGSTS_CDNSP_STRAP_HOST) ||
+	    (cdns->version != CDNSP_CONTROLLER_V2 &&
+	     state == OTGSTS_STRAP_HOST)) {
+		dev_dbg(cdns->dev, "Controller strapped to HOST\n");
+		cdns->dr_mode = USB_DR_MODE_HOST;
+	} else if ((cdns->version == CDNSP_CONTROLLER_V2 &&
+		    state == OTGSTS_CDNSP_STRAP_GADGET) ||
+		   (cdns->version != CDNSP_CONTROLLER_V2 &&
+		    state == OTGSTS_STRAP_GADGET)) {
+		dev_dbg(cdns->dev, "Controller strapped to PERIPHERAL\n");
+		cdns->dr_mode = USB_DR_MODE_PERIPHERAL;
+	}
+
+	ret = devm_request_threaded_irq(cdns->dev, cdns->otg_irq,
+					cdns_drd_irq,
+					cdns_drd_thread_irq,
+					IRQF_SHARED,
+					dev_name(cdns->dev), cdns);
+	if (ret) {
+		dev_err(cdns->dev, "couldn't get otg_irq\n");
+		return ret;
+	}
+
+	state = readl(&cdns->otg_regs->sts);
+	if (OTGSTS_OTG_NRDY(state)) {
+		dev_err(cdns->dev, "Cadence USB3 OTG device not ready\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+int cdns_drd_exit(struct cdns *cdns)
+{
+	cdns_otg_disable_irq(cdns);
+
+	return 0;
+}
+
+
+/* Indicate the cdns3 core was power lost before */
+bool cdns_power_is_lost(struct cdns *cdns)
+{
+	if (cdns->version == CDNS3_CONTROLLER_V0) {
+		if (!(readl(&cdns->otg_v0_regs->simulate) & BIT(0)))
+			return true;
+	} else {
+		if (!(readl(&cdns->otg_v1_regs->simulate) & BIT(0)))
+			return true;
+	}
+	return false;
+}
+EXPORT_SYMBOL_GPL(cdns_power_is_lost);
diff --git a/drivers/usb/cdns3/drd.h b/drivers/usb/cdns3/drd.h
new file mode 100644
index 000000000..cbdf94f73
--- /dev/null
+++ b/drivers/usb/cdns3/drd.h
@@ -0,0 +1,219 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence USB3 and USBSSP DRD header file.
+ *
+ * Copyright (C) 2018-2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+#ifndef __LINUX_CDNS3_DRD
+#define __LINUX_CDNS3_DRD
+
+#include <linux/usb/otg.h>
+#include "core.h"
+
+/*  DRD register interface for version v1 of cdns3 driver. */
+struct cdns3_otg_regs {
+	__le32 did;
+	__le32 rid;
+	__le32 capabilities;
+	__le32 reserved1;
+	__le32 cmd;
+	__le32 sts;
+	__le32 state;
+	__le32 reserved2;
+	__le32 ien;
+	__le32 ivect;
+	__le32 refclk;
+	__le32 tmr;
+	__le32 reserved3[4];
+	__le32 simulate;
+	__le32 override;
+	__le32 susp_ctrl;
+	__le32 phyrst_cfg;
+	__le32 anasts;
+	__le32 adp_ramp_time;
+	__le32 ctrl1;
+	__le32 ctrl2;
+};
+
+/*  DRD register interface for version v0 of cdns3 driver. */
+struct cdns3_otg_legacy_regs {
+	__le32 cmd;
+	__le32 sts;
+	__le32 state;
+	__le32 refclk;
+	__le32 ien;
+	__le32 ivect;
+	__le32 reserved1[3];
+	__le32 tmr;
+	__le32 reserved2[2];
+	__le32 version;
+	__le32 capabilities;
+	__le32 reserved3[2];
+	__le32 simulate;
+	__le32 reserved4[5];
+	__le32 ctrl1;
+};
+
+/* DRD register interface for cdnsp driver */
+struct cdnsp_otg_regs {
+	__le32 did;
+	__le32 rid;
+	__le32 cfgs1;
+	__le32 cfgs2;
+	__le32 cmd;
+	__le32 sts;
+	__le32 state;
+	__le32 ien;
+	__le32 ivect;
+	__le32 tmr;
+	__le32 simulate;
+	__le32 adpbc_sts;
+	__le32 adp_ramp_time;
+	__le32 adpbc_ctrl1;
+	__le32 adpbc_ctrl2;
+	__le32 override;
+	__le32 vbusvalid_dbnc_cfg;
+	__le32 sessvalid_dbnc_cfg;
+	__le32 susp_timing_ctrl;
+};
+
+#define OTG_CDNSP_DID	0x0004034E
+
+/*
+ * Common registers interface for both CDNS3 and CDNSP version of DRD.
+ */
+struct cdns_otg_common_regs {
+	__le32 cmd;
+	__le32 sts;
+	__le32 state;
+};
+
+/*
+ * Interrupt related registers. This registers are mapped in different
+ * location for CDNSP controller.
+ */
+struct cdns_otg_irq_regs {
+	__le32 ien;
+	__le32 ivect;
+};
+
+/* CDNS_RID - bitmasks */
+#define CDNS_RID(p)			((p) & GENMASK(15, 0))
+
+/* CDNS_VID - bitmasks */
+#define CDNS_DID(p)			((p) & GENMASK(31, 0))
+
+/* OTGCMD - bitmasks */
+/* "Request the bus for Device mode. */
+#define OTGCMD_DEV_BUS_REQ		BIT(0)
+/* Request the bus for Host mode */
+#define OTGCMD_HOST_BUS_REQ		BIT(1)
+/* Enable OTG mode. */
+#define OTGCMD_OTG_EN			BIT(2)
+/* Disable OTG mode */
+#define OTGCMD_OTG_DIS			BIT(3)
+/*"Configure OTG as A-Device. */
+#define OTGCMD_A_DEV_EN			BIT(4)
+/*"Configure OTG as A-Device. */
+#define OTGCMD_A_DEV_DIS		BIT(5)
+/* Drop the bus for Device mod	e. */
+#define OTGCMD_DEV_BUS_DROP		BIT(8)
+/* Drop the bus for Host mode*/
+#define OTGCMD_HOST_BUS_DROP		BIT(9)
+/* Power Down USBSS-DEV - only for CDNS3.*/
+#define OTGCMD_DEV_POWER_OFF		BIT(11)
+/* Power Down CDNSXHCI - only for CDNS3. */
+#define OTGCMD_HOST_POWER_OFF		BIT(12)
+
+/* OTGIEN - bitmasks */
+/* ID change interrupt enable */
+#define OTGIEN_ID_CHANGE_INT		BIT(0)
+/* Vbusvalid fall detected interrupt enable.*/
+#define OTGIEN_VBUSVALID_RISE_INT	BIT(4)
+/* Vbusvalid fall detected interrupt enable */
+#define OTGIEN_VBUSVALID_FALL_INT	BIT(5)
+
+/* OTGSTS - bitmasks */
+/*
+ * Current value of the ID pin. It is only valid when idpullup in
+ *  OTGCTRL1_TYPE register is set to '1'.
+ */
+#define OTGSTS_ID_VALUE			BIT(0)
+/* Current value of the vbus_valid */
+#define OTGSTS_VBUS_VALID		BIT(1)
+/* Current value of the b_sess_vld */
+#define OTGSTS_SESSION_VALID		BIT(2)
+/*Device mode is active*/
+#define OTGSTS_DEV_ACTIVE		BIT(3)
+/* Host mode is active. */
+#define OTGSTS_HOST_ACTIVE		BIT(4)
+/* OTG Controller not ready. */
+#define OTGSTS_OTG_NRDY_MASK		BIT(11)
+#define OTGSTS_OTG_NRDY(p)		((p) & OTGSTS_OTG_NRDY_MASK)
+/*
+ * Value of the strap pins for:
+ * CDNS3:
+ * 000 - no default configuration
+ * 010 - Controller initiall configured as Host
+ * 100 - Controller initially configured as Device
+ * CDNSP:
+ * 000 - No default configuration.
+ * 010 - Controller initiall configured as Host.
+ * 100 - Controller initially configured as Device.
+ */
+#define OTGSTS_STRAP(p)			(((p) & GENMASK(14, 12)) >> 12)
+#define OTGSTS_STRAP_NO_DEFAULT_CFG	0x00
+#define OTGSTS_STRAP_HOST_OTG		0x01
+#define OTGSTS_STRAP_HOST		0x02
+#define OTGSTS_STRAP_GADGET		0x04
+#define OTGSTS_CDNSP_STRAP_HOST		0x01
+#define OTGSTS_CDNSP_STRAP_GADGET	0x02
+
+/* Host mode is turned on. */
+#define OTGSTS_CDNS3_XHCI_READY		BIT(26)
+#define OTGSTS_CDNSP_XHCI_READY		BIT(27)
+
+/* "Device mode is turned on .*/
+#define OTGSTS_CDNS3_DEV_READY		BIT(27)
+#define OTGSTS_CDNSP_DEV_READY		BIT(26)
+
+/* OTGSTATE- bitmasks */
+#define OTGSTATE_DEV_STATE_MASK		GENMASK(2, 0)
+#define OTGSTATE_HOST_STATE_MASK	GENMASK(5, 3)
+#define OTGSTATE_HOST_STATE_IDLE	0x0
+#define OTGSTATE_HOST_STATE_VBUS_FALL	0x7
+#define OTGSTATE_HOST_STATE(p)		(((p) & OTGSTATE_HOST_STATE_MASK) >> 3)
+
+/* OTGREFCLK - bitmasks */
+#define OTGREFCLK_STB_CLK_SWITCH_EN	BIT(31)
+
+/* OVERRIDE - bitmasks */
+#define OVERRIDE_IDPULLUP		BIT(0)
+/* Only for CDNS3_CONTROLLER_V0 version */
+#define OVERRIDE_IDPULLUP_V0		BIT(24)
+/* Vbusvalid/Sesvalid override select. */
+#define OVERRIDE_SESS_VLD_SEL		BIT(10)
+
+/* PHYRST_CFG - bitmasks */
+#define PHYRST_CFG_PHYRST_A_ENABLE     BIT(0)
+
+#define CDNS3_ID_PERIPHERAL		1
+#define CDNS3_ID_HOST			0
+
+bool cdns_is_host(struct cdns *cdns);
+bool cdns_is_device(struct cdns *cdns);
+int cdns_get_id(struct cdns *cdns);
+int cdns_get_vbus(struct cdns *cdns);
+void cdns_clear_vbus(struct cdns *cdns);
+void cdns_set_vbus(struct cdns *cdns);
+int cdns_drd_init(struct cdns *cdns);
+int cdns_drd_exit(struct cdns *cdns);
+int cdns_drd_update_mode(struct cdns *cdns);
+int cdns_drd_gadget_on(struct cdns *cdns);
+void cdns_drd_gadget_off(struct cdns *cdns);
+int cdns_drd_host_on(struct cdns *cdns);
+void cdns_drd_host_off(struct cdns *cdns);
+bool cdns_power_is_lost(struct cdns *cdns);
+#endif /* __LINUX_CDNS3_DRD */
diff --git a/drivers/usb/cdns3/gadget-export.h b/drivers/usb/cdns3/gadget-export.h
new file mode 100644
index 000000000..c37b6269b
--- /dev/null
+++ b/drivers/usb/cdns3/gadget-export.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence USBSS and USBSSP DRD Driver - Gadget Export APIs.
+ *
+ * Copyright (C) 2017 NXP
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Peter Chen <peter.chen@nxp.com>
+ */
+#ifndef __LINUX_CDNS3_GADGET_EXPORT
+#define __LINUX_CDNS3_GADGET_EXPORT
+
+#if IS_ENABLED(CONFIG_USB_CDNSP_GADGET)
+
+int cdnsp_gadget_init(struct cdns *cdns);
+#else
+
+static inline int cdnsp_gadget_init(struct cdns *cdns)
+{
+	return -ENXIO;
+}
+
+#endif /* CONFIG_USB_CDNSP_GADGET */
+
+#if IS_ENABLED(CONFIG_USB_CDNS3_GADGET)
+
+int cdns3_gadget_init(struct cdns *cdns);
+#else
+
+static inline int cdns3_gadget_init(struct cdns *cdns)
+{
+	return -ENXIO;
+}
+
+#endif /* CONFIG_USB_CDNS3_GADGET */
+
+#endif /* __LINUX_CDNS3_GADGET_EXPORT */
diff --git a/drivers/usb/cdns3/host-export.h b/drivers/usb/cdns3/host-export.h
new file mode 100644
index 000000000..cf92173ec
--- /dev/null
+++ b/drivers/usb/cdns3/host-export.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence USBSS and USBSSP DRD Driver - Host Export APIs
+ *
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Peter Chen <peter.chen@nxp.com>
+ */
+#ifndef __LINUX_CDNS3_HOST_EXPORT
+#define __LINUX_CDNS3_HOST_EXPORT
+
+#if IS_ENABLED(CONFIG_USB_CDNS_HOST)
+
+int cdns_host_init(struct cdns *cdns);
+
+#else
+
+static inline int cdns_host_init(struct cdns *cdns)
+{
+	return -ENXIO;
+}
+
+static inline void cdns_host_exit(struct cdns *cdns) { }
+
+#endif /* USB_CDNS_HOST */
+
+#endif /* __LINUX_CDNS3_HOST_EXPORT */
diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c
new file mode 100644
index 000000000..6164fc4c9
--- /dev/null
+++ b/drivers/usb/cdns3/host.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS and USBSSP DRD Driver - host side
+ *
+ * Copyright (C) 2018-2019 Cadence Design Systems.
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Peter Chen <peter.chen@nxp.com>
+ *          Pawel Laszczak <pawell@cadence.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include "core.h"
+#include "drd.h"
+#include "host-export.h"
+#include <linux/usb/hcd.h>
+#include "../host/xhci.h"
+#include "../host/xhci-plat.h"
+
+#define XECP_PORT_CAP_REG	0x8000
+#define XECP_AUX_CTRL_REG1	0x8120
+
+#define CFG_RXDET_P3_EN		BIT(15)
+#define LPM_2_STB_SWITCH_EN	BIT(25)
+
+static void xhci_cdns3_plat_start(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	u32 value;
+
+	/* set usbcmd.EU3S */
+	value = readl(&xhci->op_regs->command);
+	value |= CMD_PM_INDEX;
+	writel(value, &xhci->op_regs->command);
+
+	if (hcd->regs) {
+		value = readl(hcd->regs + XECP_AUX_CTRL_REG1);
+		value |= CFG_RXDET_P3_EN;
+		writel(value, hcd->regs + XECP_AUX_CTRL_REG1);
+
+		value = readl(hcd->regs + XECP_PORT_CAP_REG);
+		value |= LPM_2_STB_SWITCH_EN;
+		writel(value, hcd->regs + XECP_PORT_CAP_REG);
+	}
+}
+
+static int xhci_cdns3_resume_quirk(struct usb_hcd *hcd)
+{
+	xhci_cdns3_plat_start(hcd);
+	return 0;
+}
+
+static const struct xhci_plat_priv xhci_plat_cdns3_xhci = {
+	.quirks = XHCI_SKIP_PHY_INIT | XHCI_AVOID_BEI,
+	.plat_start = xhci_cdns3_plat_start,
+	.resume_quirk = xhci_cdns3_resume_quirk,
+};
+
+static int __cdns_host_init(struct cdns *cdns)
+{
+	struct platform_device *xhci;
+	int ret;
+	struct usb_hcd *hcd;
+
+	cdns_drd_host_on(cdns);
+
+	xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
+	if (!xhci) {
+		dev_err(cdns->dev, "couldn't allocate xHCI device\n");
+		return -ENOMEM;
+	}
+
+	xhci->dev.parent = cdns->dev;
+	cdns->host_dev = xhci;
+
+	ret = platform_device_add_resources(xhci, cdns->xhci_res,
+					    CDNS_XHCI_RESOURCES_NUM);
+	if (ret) {
+		dev_err(cdns->dev, "couldn't add resources to xHCI device\n");
+		goto err1;
+	}
+
+	cdns->xhci_plat_data = kmemdup(&xhci_plat_cdns3_xhci,
+			sizeof(struct xhci_plat_priv), GFP_KERNEL);
+	if (!cdns->xhci_plat_data) {
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	if (cdns->pdata && (cdns->pdata->quirks & CDNS3_DEFAULT_PM_RUNTIME_ALLOW))
+		cdns->xhci_plat_data->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
+
+	ret = platform_device_add_data(xhci, cdns->xhci_plat_data,
+			sizeof(struct xhci_plat_priv));
+	if (ret)
+		goto free_memory;
+
+	ret = platform_device_add(xhci);
+	if (ret) {
+		dev_err(cdns->dev, "failed to register xHCI device\n");
+		goto free_memory;
+	}
+
+	/* Glue needs to access xHCI region register for Power management */
+	hcd = platform_get_drvdata(xhci);
+	if (hcd)
+		cdns->xhci_regs = hcd->regs;
+
+	return 0;
+
+free_memory:
+	kfree(cdns->xhci_plat_data);
+err1:
+	platform_device_put(xhci);
+	return ret;
+}
+
+static void cdns_host_exit(struct cdns *cdns)
+{
+	kfree(cdns->xhci_plat_data);
+	platform_device_unregister(cdns->host_dev);
+	cdns->host_dev = NULL;
+	cdns_drd_host_off(cdns);
+}
+
+int cdns_host_init(struct cdns *cdns)
+{
+	struct cdns_role_driver *rdrv;
+
+	rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
+	if (!rdrv)
+		return -ENOMEM;
+
+	rdrv->start	= __cdns_host_init;
+	rdrv->stop	= cdns_host_exit;
+	rdrv->state	= CDNS_ROLE_STATE_INACTIVE;
+	rdrv->name	= "host";
+
+	cdns->roles[USB_ROLE_HOST] = rdrv;
+
+	return 0;
+}
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
new file mode 100644
index 000000000..c815824a0
--- /dev/null
+++ b/drivers/usb/chipidea/Kconfig
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config USB_CHIPIDEA
+	tristate "ChipIdea Highspeed Dual Role Controller"
+	depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA
+	select EXTCON
+	select RESET_CONTROLLER
+	select USB_ULPI_BUS
+	select USB_ROLE_SWITCH
+	select USB_TEGRA_PHY if ARCH_TEGRA
+	help
+	  Say Y here if your system has a dual role high speed USB
+	  controller based on ChipIdea silicon IP. It supports:
+	  Dual-role switch (ID, OTG FSM, sysfs), Host-only, and
+	  Peripheral-only.
+
+	  When compiled dynamically, the module will be called ci_hdrc.ko.
+
+if USB_CHIPIDEA
+
+config USB_CHIPIDEA_UDC
+	bool "ChipIdea device controller"
+	depends on USB_GADGET
+	help
+	  Say Y here to enable device controller functionality of the
+	  ChipIdea driver.
+
+config USB_CHIPIDEA_HOST
+	bool "ChipIdea host controller"
+	depends on USB_EHCI_HCD
+	select USB_EHCI_ROOT_HUB_TT
+	help
+	  Say Y here to enable host controller functionality of the
+	  ChipIdea driver.
+
+config USB_CHIPIDEA_PCI
+	tristate "Enable PCI glue driver" if EXPERT
+	depends on USB_PCI
+	depends on NOP_USB_XCEIV
+	default USB_CHIPIDEA
+
+config USB_CHIPIDEA_MSM
+	tristate "Enable MSM hsusb glue driver" if EXPERT
+	default USB_CHIPIDEA
+
+config USB_CHIPIDEA_IMX
+	tristate "Enable i.MX USB glue driver" if EXPERT
+	depends on OF
+	default USB_CHIPIDEA
+
+config USB_CHIPIDEA_GENERIC
+	tristate "Enable generic USB2 glue driver" if EXPERT
+	default USB_CHIPIDEA
+
+config USB_CHIPIDEA_TEGRA
+	tristate "Enable Tegra USB glue driver" if EXPERT
+	depends on OF
+	default USB_CHIPIDEA
+
+endif
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
new file mode 100644
index 000000000..6f4a3dece
--- /dev/null
+++ b/drivers/usb/chipidea/Makefile
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# define_trace.h needs to know how to find our header
+CFLAGS_trace.o			:= -I$(src)
+obj-$(CONFIG_USB_CHIPIDEA)		+= ci_hdrc.o
+
+ci_hdrc-y				:= core.o otg.o debug.o ulpi.o
+ci_hdrc-$(CONFIG_USB_CHIPIDEA_UDC)	+= udc.o trace.o
+ci_hdrc-$(CONFIG_USB_CHIPIDEA_HOST)	+= host.o
+ci_hdrc-$(CONFIG_USB_OTG_FSM)		+= otg_fsm.o
+
+# Glue/Bridge layers go here
+
+obj-$(CONFIG_USB_CHIPIDEA_GENERIC)	+= ci_hdrc_usb2.o
+obj-$(CONFIG_USB_CHIPIDEA_MSM)		+= ci_hdrc_msm.o
+obj-$(CONFIG_USB_CHIPIDEA_PCI)		+= ci_hdrc_pci.o
+obj-$(CONFIG_USB_CHIPIDEA_IMX)		+= ci_hdrc_imx.o usbmisc_imx.o
+obj-$(CONFIG_USB_CHIPIDEA_TEGRA)	+= ci_hdrc_tegra.o
diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
new file mode 100644
index 000000000..b1540ce93
--- /dev/null
+++ b/drivers/usb/chipidea/bits.h
@@ -0,0 +1,147 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * bits.h - register bits of the ChipIdea USB IP core
+ *
+ * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ *
+ * Author: David Lopo
+ */
+
+#ifndef __DRIVERS_USB_CHIPIDEA_BITS_H
+#define __DRIVERS_USB_CHIPIDEA_BITS_H
+
+#include <linux/usb/ehci_def.h>
+
+/*
+ * ID
+ * For 1.x revision, bit24 - bit31 are reserved
+ * For 2.x revision, bit25 - bit28 are 0x2
+ */
+#define TAG		      (0x1F << 16)
+#define REVISION	      (0xF << 21)
+#define VERSION		      (0xF << 25)
+#define CIVERSION	      (0x7 << 29)
+
+/* SBUSCFG */
+#define AHBBRST_MASK		0x7
+
+/* HCCPARAMS */
+#define HCCPARAMS_LEN         BIT(17)
+
+/* DCCPARAMS */
+#define DCCPARAMS_DEN         (0x1F << 0)
+#define DCCPARAMS_DC          BIT(7)
+#define DCCPARAMS_HC          BIT(8)
+
+/* TESTMODE */
+#define TESTMODE_FORCE        BIT(0)
+
+/* USBCMD */
+#define USBCMD_RS             BIT(0)
+#define USBCMD_RST            BIT(1)
+#define USBCMD_SUTW           BIT(13)
+#define USBCMD_ATDTW          BIT(14)
+
+/* USBSTS & USBINTR */
+#define USBi_UI               BIT(0)
+#define USBi_UEI              BIT(1)
+#define USBi_PCI              BIT(2)
+#define USBi_URI              BIT(6)
+#define USBi_SLI              BIT(8)
+
+/* DEVICEADDR */
+#define DEVICEADDR_USBADRA    BIT(24)
+#define DEVICEADDR_USBADR     (0x7FUL << 25)
+
+/* TTCTRL */
+#define TTCTRL_TTHA_MASK	(0x7fUL << 24)
+/* Set non-zero value for internal TT Hub address representation */
+#define TTCTRL_TTHA		(0x7fUL << 24)
+
+/* BURSTSIZE */
+#define RX_BURST_MASK		0xff
+#define TX_BURST_MASK		0xff00
+
+/* PORTSC */
+#define PORTSC_CCS            BIT(0)
+#define PORTSC_CSC            BIT(1)
+#define PORTSC_PEC            BIT(3)
+#define PORTSC_OCC            BIT(5)
+#define PORTSC_FPR            BIT(6)
+#define PORTSC_SUSP           BIT(7)
+#define PORTSC_HSP            BIT(9)
+#define PORTSC_PP             BIT(12)
+#define PORTSC_PTC            (0x0FUL << 16)
+#define PORTSC_WKCN           BIT(20)
+#define PORTSC_PHCD(d)	      ((d) ? BIT(22) : BIT(23))
+/* PTS and PTW for non lpm version only */
+#define PORTSC_PFSC           BIT(24)
+#define PORTSC_PTS(d)						\
+	(u32)((((d) & 0x3) << 30) | (((d) & 0x4) ? BIT(25) : 0))
+#define PORTSC_PTW            BIT(28)
+#define PORTSC_STS            BIT(29)
+
+#define PORTSC_W1C_BITS						\
+	(PORTSC_CSC | PORTSC_PEC | PORTSC_OCC)
+
+/* DEVLC */
+#define DEVLC_PFSC            BIT(23)
+#define DEVLC_PSPD            (0x03UL << 25)
+#define DEVLC_PSPD_HS         (0x02UL << 25)
+#define DEVLC_PTW             BIT(27)
+#define DEVLC_STS             BIT(28)
+#define DEVLC_PTS(d)          (u32)(((d) & 0x7) << 29)
+
+/* Encoding for DEVLC_PTS and PORTSC_PTS */
+#define PTS_UTMI              0
+#define PTS_ULPI              2
+#define PTS_SERIAL            3
+#define PTS_HSIC              4
+
+/* OTGSC */
+#define OTGSC_IDPU	      BIT(5)
+#define OTGSC_HADP	      BIT(6)
+#define OTGSC_HABA	      BIT(7)
+#define OTGSC_ID	      BIT(8)
+#define OTGSC_AVV	      BIT(9)
+#define OTGSC_ASV	      BIT(10)
+#define OTGSC_BSV	      BIT(11)
+#define OTGSC_BSE	      BIT(12)
+#define OTGSC_IDIS	      BIT(16)
+#define OTGSC_AVVIS	      BIT(17)
+#define OTGSC_ASVIS	      BIT(18)
+#define OTGSC_BSVIS	      BIT(19)
+#define OTGSC_BSEIS	      BIT(20)
+#define OTGSC_1MSIS	      BIT(21)
+#define OTGSC_DPIS	      BIT(22)
+#define OTGSC_IDIE	      BIT(24)
+#define OTGSC_AVVIE	      BIT(25)
+#define OTGSC_ASVIE	      BIT(26)
+#define OTGSC_BSVIE	      BIT(27)
+#define OTGSC_BSEIE	      BIT(28)
+#define OTGSC_1MSIE	      BIT(29)
+#define OTGSC_DPIE	      BIT(30)
+#define OTGSC_INT_EN_BITS	(OTGSC_IDIE | OTGSC_AVVIE | OTGSC_ASVIE \
+				| OTGSC_BSVIE | OTGSC_BSEIE | OTGSC_1MSIE \
+				| OTGSC_DPIE)
+#define OTGSC_INT_STATUS_BITS	(OTGSC_IDIS | OTGSC_AVVIS | OTGSC_ASVIS	\
+				| OTGSC_BSVIS | OTGSC_BSEIS | OTGSC_1MSIS \
+				| OTGSC_DPIS)
+
+/* USBMODE */
+#define USBMODE_CM            (0x03UL <<  0)
+#define USBMODE_CM_DC         (0x02UL <<  0)
+#define USBMODE_SLOM          BIT(3)
+#define USBMODE_CI_SDIS       BIT(4)
+
+/* ENDPTCTRL */
+#define ENDPTCTRL_RXS         BIT(0)
+#define ENDPTCTRL_RXT         (0x03UL <<  2)
+#define ENDPTCTRL_RXR         BIT(6)         /* reserved for port 0 */
+#define ENDPTCTRL_RXE         BIT(7)
+#define ENDPTCTRL_TXS         BIT(16)
+#define ENDPTCTRL_TXT         (0x03UL << 18)
+#define ENDPTCTRL_TXR         BIT(22)        /* reserved for port 0 */
+#define ENDPTCTRL_TXE         BIT(23)
+
+#endif /* __DRIVERS_USB_CHIPIDEA_BITS_H */
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
new file mode 100644
index 000000000..2ff839112
--- /dev/null
+++ b/drivers/usb/chipidea/ci.h
@@ -0,0 +1,473 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ci.h - common structures, functions, and macros of the ChipIdea driver
+ *
+ * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ *
+ * Author: David Lopo
+ */
+
+#ifndef __DRIVERS_USB_CHIPIDEA_CI_H
+#define __DRIVERS_USB_CHIPIDEA_CI_H
+
+#include <linux/list.h>
+#include <linux/irqreturn.h>
+#include <linux/usb.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg-fsm.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/role.h>
+#include <linux/ulpi/interface.h>
+
+/******************************************************************************
+ * DEFINE
+ *****************************************************************************/
+#define TD_PAGE_COUNT      5
+#define CI_HDRC_PAGE_SIZE  4096ul /* page size for TD's */
+#define ENDPT_MAX          32
+#define CI_MAX_BUF_SIZE	(TD_PAGE_COUNT * CI_HDRC_PAGE_SIZE)
+
+/******************************************************************************
+ * REGISTERS
+ *****************************************************************************/
+/* Identification Registers */
+#define ID_ID				0x0
+#define ID_HWGENERAL			0x4
+#define ID_HWHOST			0x8
+#define ID_HWDEVICE			0xc
+#define ID_HWTXBUF			0x10
+#define ID_HWRXBUF			0x14
+#define ID_SBUSCFG			0x90
+
+/* register indices */
+enum ci_hw_regs {
+	CAP_CAPLENGTH,
+	CAP_HCCPARAMS,
+	CAP_DCCPARAMS,
+	CAP_TESTMODE,
+	CAP_LAST = CAP_TESTMODE,
+	OP_USBCMD,
+	OP_USBSTS,
+	OP_USBINTR,
+	OP_FRINDEX,
+	OP_DEVICEADDR,
+	OP_ENDPTLISTADDR,
+	OP_TTCTRL,
+	OP_BURSTSIZE,
+	OP_ULPI_VIEWPORT,
+	OP_PORTSC,
+	OP_DEVLC,
+	OP_OTGSC,
+	OP_USBMODE,
+	OP_ENDPTSETUPSTAT,
+	OP_ENDPTPRIME,
+	OP_ENDPTFLUSH,
+	OP_ENDPTSTAT,
+	OP_ENDPTCOMPLETE,
+	OP_ENDPTCTRL,
+	/* endptctrl1..15 follow */
+	OP_LAST = OP_ENDPTCTRL + ENDPT_MAX / 2,
+};
+
+/******************************************************************************
+ * STRUCTURES
+ *****************************************************************************/
+/**
+ * struct ci_hw_ep - endpoint representation
+ * @ep: endpoint structure for gadget drivers
+ * @dir: endpoint direction (TX/RX)
+ * @num: endpoint number
+ * @type: endpoint type
+ * @name: string description of the endpoint
+ * @qh: queue head for this endpoint
+ * @wedge: is the endpoint wedged
+ * @ci: pointer to the controller
+ * @lock: pointer to controller's spinlock
+ * @td_pool: pointer to controller's TD pool
+ */
+struct ci_hw_ep {
+	struct usb_ep				ep;
+	u8					dir;
+	u8					num;
+	u8					type;
+	char					name[16];
+	struct {
+		struct list_head	queue;
+		struct ci_hw_qh		*ptr;
+		dma_addr_t		dma;
+	}					qh;
+	int					wedge;
+
+	/* global resources */
+	struct ci_hdrc				*ci;
+	spinlock_t				*lock;
+	struct dma_pool				*td_pool;
+	struct td_node				*pending_td;
+};
+
+enum ci_role {
+	CI_ROLE_HOST = 0,
+	CI_ROLE_GADGET,
+	CI_ROLE_END,
+};
+
+enum ci_revision {
+	CI_REVISION_1X = 10,	/* Revision 1.x */
+	CI_REVISION_20 = 20, /* Revision 2.0 */
+	CI_REVISION_21, /* Revision 2.1 */
+	CI_REVISION_22, /* Revision 2.2 */
+	CI_REVISION_23, /* Revision 2.3 */
+	CI_REVISION_24, /* Revision 2.4 */
+	CI_REVISION_25, /* Revision 2.5 */
+	CI_REVISION_25_PLUS, /* Revision above than 2.5 */
+	CI_REVISION_UNKNOWN = 99, /* Unknown Revision */
+};
+
+/**
+ * struct ci_role_driver - host/gadget role driver
+ * @start: start this role
+ * @stop: stop this role
+ * @irq: irq handler for this role
+ * @name: role name string (host/gadget)
+ */
+struct ci_role_driver {
+	int		(*start)(struct ci_hdrc *);
+	void		(*stop)(struct ci_hdrc *);
+	irqreturn_t	(*irq)(struct ci_hdrc *);
+	const char	*name;
+};
+
+/**
+ * struct hw_bank - hardware register mapping representation
+ * @lpm: set if the device is LPM capable
+ * @phys: physical address of the controller's registers
+ * @abs: absolute address of the beginning of register window
+ * @cap: capability registers
+ * @op: operational registers
+ * @size: size of the register window
+ * @regmap: register lookup table
+ */
+struct hw_bank {
+	unsigned	lpm;
+	resource_size_t	phys;
+	void __iomem	*abs;
+	void __iomem	*cap;
+	void __iomem	*op;
+	size_t		size;
+	void __iomem	*regmap[OP_LAST + 1];
+};
+
+/**
+ * struct ci_hdrc - chipidea device representation
+ * @dev: pointer to parent device
+ * @lock: access synchronization
+ * @hw_bank: hardware register mapping
+ * @irq: IRQ number
+ * @roles: array of supported roles for this controller
+ * @role: current role
+ * @is_otg: if the device is otg-capable
+ * @fsm: otg finite state machine
+ * @otg_fsm_hrtimer: hrtimer for otg fsm timers
+ * @hr_timeouts: time out list for active otg fsm timers
+ * @enabled_otg_timer_bits: bits of enabled otg timers
+ * @next_otg_timer: next nearest enabled timer to be expired
+ * @work: work for role changing
+ * @wq: workqueue thread
+ * @qh_pool: allocation pool for queue heads
+ * @td_pool: allocation pool for transfer descriptors
+ * @gadget: device side representation for peripheral controller
+ * @driver: gadget driver
+ * @resume_state: save the state of gadget suspend from
+ * @hw_ep_max: total number of endpoints supported by hardware
+ * @ci_hw_ep: array of endpoints
+ * @ep0_dir: ep0 direction
+ * @ep0out: pointer to ep0 OUT endpoint
+ * @ep0in: pointer to ep0 IN endpoint
+ * @status: ep0 status request
+ * @setaddr: if we should set the address on status completion
+ * @address: usb address received from the host
+ * @remote_wakeup: host-enabled remote wakeup
+ * @suspended: suspended by host
+ * @test_mode: the selected test mode
+ * @platdata: platform specific information supplied by parent device
+ * @vbus_active: is VBUS active
+ * @ulpi: pointer to ULPI device, if any
+ * @ulpi_ops: ULPI read/write ops for this device
+ * @phy: pointer to PHY, if any
+ * @usb_phy: pointer to USB PHY, if any and if using the USB PHY framework
+ * @hcd: pointer to usb_hcd for ehci host driver
+ * @id_event: indicates there is an id event, and handled at ci_otg_work
+ * @b_sess_valid_event: indicates there is a vbus event, and handled
+ * at ci_otg_work
+ * @imx28_write_fix: Freescale imx28 needs swp instruction for writing
+ * @supports_runtime_pm: if runtime pm is supported
+ * @in_lpm: if the core in low power mode
+ * @wakeup_int: if wakeup interrupt occur
+ * @rev: The revision number for controller
+ * @mutex: protect code from concorrent running when doing role switch
+ */
+struct ci_hdrc {
+	struct device			*dev;
+	spinlock_t			lock;
+	struct hw_bank			hw_bank;
+	int				irq;
+	struct ci_role_driver		*roles[CI_ROLE_END];
+	enum ci_role			role;
+	bool				is_otg;
+	struct usb_otg			otg;
+	struct otg_fsm			fsm;
+	struct hrtimer			otg_fsm_hrtimer;
+	ktime_t				hr_timeouts[NUM_OTG_FSM_TIMERS];
+	unsigned			enabled_otg_timer_bits;
+	enum otg_fsm_timer		next_otg_timer;
+	struct usb_role_switch		*role_switch;
+	struct work_struct		work;
+	struct workqueue_struct		*wq;
+
+	struct dma_pool			*qh_pool;
+	struct dma_pool			*td_pool;
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	enum usb_device_state		resume_state;
+	unsigned			hw_ep_max;
+	struct ci_hw_ep			ci_hw_ep[ENDPT_MAX];
+	u32				ep0_dir;
+	struct ci_hw_ep			*ep0out, *ep0in;
+
+	struct usb_request		*status;
+	bool				setaddr;
+	u8				address;
+	u8				remote_wakeup;
+	u8				suspended;
+	u8				test_mode;
+
+	struct ci_hdrc_platform_data	*platdata;
+	int				vbus_active;
+	struct ulpi			*ulpi;
+	struct ulpi_ops 		ulpi_ops;
+	struct phy			*phy;
+	/* old usb_phy interface */
+	struct usb_phy			*usb_phy;
+	struct usb_hcd			*hcd;
+	bool				id_event;
+	bool				b_sess_valid_event;
+	bool				imx28_write_fix;
+	bool				has_portsc_pec_bug;
+	bool				supports_runtime_pm;
+	bool				in_lpm;
+	bool				wakeup_int;
+	enum ci_revision		rev;
+	struct mutex                    mutex;
+};
+
+static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
+{
+	BUG_ON(ci->role >= CI_ROLE_END || !ci->roles[ci->role]);
+	return ci->roles[ci->role];
+}
+
+static inline int ci_role_start(struct ci_hdrc *ci, enum ci_role role)
+{
+	int ret;
+
+	if (role >= CI_ROLE_END)
+		return -EINVAL;
+
+	if (!ci->roles[role])
+		return -ENXIO;
+
+	ret = ci->roles[role]->start(ci);
+	if (!ret)
+		ci->role = role;
+	return ret;
+}
+
+static inline void ci_role_stop(struct ci_hdrc *ci)
+{
+	enum ci_role role = ci->role;
+
+	if (role == CI_ROLE_END)
+		return;
+
+	ci->role = CI_ROLE_END;
+
+	ci->roles[role]->stop(ci);
+}
+
+static inline enum usb_role ci_role_to_usb_role(struct ci_hdrc *ci)
+{
+	if (ci->role == CI_ROLE_HOST)
+		return USB_ROLE_HOST;
+	else if (ci->role == CI_ROLE_GADGET && ci->vbus_active)
+		return USB_ROLE_DEVICE;
+	else
+		return USB_ROLE_NONE;
+}
+
+static inline enum ci_role usb_role_to_ci_role(enum usb_role role)
+{
+	if (role == USB_ROLE_HOST)
+		return CI_ROLE_HOST;
+	else if (role == USB_ROLE_DEVICE)
+		return CI_ROLE_GADGET;
+	else
+		return CI_ROLE_END;
+}
+
+/**
+ * hw_read_id_reg: reads from a identification register
+ * @ci: the controller
+ * @offset: offset from the beginning of identification registers region
+ * @mask: bitfield mask
+ *
+ * This function returns register contents
+ */
+static inline u32 hw_read_id_reg(struct ci_hdrc *ci, u32 offset, u32 mask)
+{
+	return ioread32(ci->hw_bank.abs + offset) & mask;
+}
+
+/**
+ * hw_write_id_reg: writes to a identification register
+ * @ci: the controller
+ * @offset: offset from the beginning of identification registers region
+ * @mask: bitfield mask
+ * @data: new value
+ */
+static inline void hw_write_id_reg(struct ci_hdrc *ci, u32 offset,
+			    u32 mask, u32 data)
+{
+	if (~mask)
+		data = (ioread32(ci->hw_bank.abs + offset) & ~mask)
+			| (data & mask);
+
+	iowrite32(data, ci->hw_bank.abs + offset);
+}
+
+/**
+ * hw_read: reads from a hw register
+ * @ci: the controller
+ * @reg:  register index
+ * @mask: bitfield mask
+ *
+ * This function returns register contents
+ */
+static inline u32 hw_read(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask)
+{
+	return ioread32(ci->hw_bank.regmap[reg]) & mask;
+}
+
+#ifdef CONFIG_SOC_IMX28
+static inline void imx28_ci_writel(u32 val, volatile void __iomem *addr)
+{
+	__asm__ ("swp %0, %0, [%1]" : : "r"(val), "r"(addr));
+}
+#else
+static inline void imx28_ci_writel(u32 val, volatile void __iomem *addr)
+{
+}
+#endif
+
+static inline void __hw_write(struct ci_hdrc *ci, u32 val,
+		void __iomem *addr)
+{
+	if (ci->imx28_write_fix)
+		imx28_ci_writel(val, addr);
+	else
+		iowrite32(val, addr);
+}
+
+/**
+ * hw_write: writes to a hw register
+ * @ci: the controller
+ * @reg:  register index
+ * @mask: bitfield mask
+ * @data: new value
+ */
+static inline void hw_write(struct ci_hdrc *ci, enum ci_hw_regs reg,
+			    u32 mask, u32 data)
+{
+	if (~mask)
+		data = (ioread32(ci->hw_bank.regmap[reg]) & ~mask)
+			| (data & mask);
+
+	__hw_write(ci, data, ci->hw_bank.regmap[reg]);
+}
+
+/**
+ * hw_test_and_clear: tests & clears a hw register
+ * @ci: the controller
+ * @reg:  register index
+ * @mask: bitfield mask
+ *
+ * This function returns register contents
+ */
+static inline u32 hw_test_and_clear(struct ci_hdrc *ci, enum ci_hw_regs reg,
+				    u32 mask)
+{
+	u32 val = ioread32(ci->hw_bank.regmap[reg]) & mask;
+
+	__hw_write(ci, val, ci->hw_bank.regmap[reg]);
+	return val;
+}
+
+/**
+ * hw_test_and_write: tests & writes a hw register
+ * @ci: the controller
+ * @reg:  register index
+ * @mask: bitfield mask
+ * @data: new value
+ *
+ * This function returns register contents
+ */
+static inline u32 hw_test_and_write(struct ci_hdrc *ci, enum ci_hw_regs reg,
+				    u32 mask, u32 data)
+{
+	u32 val = hw_read(ci, reg, ~0);
+
+	hw_write(ci, reg, mask, data);
+	return (val & mask) >> __ffs(mask);
+}
+
+/**
+ * ci_otg_is_fsm_mode: runtime check if otg controller
+ * is in otg fsm mode.
+ *
+ * @ci: chipidea device
+ */
+static inline bool ci_otg_is_fsm_mode(struct ci_hdrc *ci)
+{
+#ifdef CONFIG_USB_OTG_FSM
+	struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps;
+
+	return ci->is_otg && ci->roles[CI_ROLE_HOST] &&
+		ci->roles[CI_ROLE_GADGET] && (otg_caps->srp_support ||
+		otg_caps->hnp_support || otg_caps->adp_support);
+#else
+	return false;
+#endif
+}
+
+int ci_ulpi_init(struct ci_hdrc *ci);
+void ci_ulpi_exit(struct ci_hdrc *ci);
+int ci_ulpi_resume(struct ci_hdrc *ci);
+
+u32 hw_read_intr_enable(struct ci_hdrc *ci);
+
+u32 hw_read_intr_status(struct ci_hdrc *ci);
+
+int hw_device_reset(struct ci_hdrc *ci);
+
+int hw_port_test_set(struct ci_hdrc *ci, u8 mode);
+
+u8 hw_port_test_get(struct ci_hdrc *ci);
+
+void hw_phymode_configure(struct ci_hdrc *ci);
+
+void ci_platform_configure(struct ci_hdrc *ci);
+
+void dbg_create_files(struct ci_hdrc *ci);
+
+void dbg_remove_files(struct ci_hdrc *ci);
+#endif	/* __DRIVERS_USB_CHIPIDEA_CI_H */
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
new file mode 100644
index 000000000..984087bbf
--- /dev/null
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -0,0 +1,692 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/usb/chipidea.h>
+#include <linux/usb/of.h>
+#include <linux/clk.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pm_qos.h>
+
+#include "ci.h"
+#include "ci_hdrc_imx.h"
+
+struct ci_hdrc_imx_platform_flag {
+	unsigned int flags;
+};
+
+static const struct ci_hdrc_imx_platform_flag imx23_usb_data = {
+	.flags = CI_HDRC_TURN_VBUS_EARLY_ON |
+		CI_HDRC_DISABLE_STREAMING,
+};
+
+static const struct ci_hdrc_imx_platform_flag imx27_usb_data = {
+	.flags = CI_HDRC_DISABLE_STREAMING,
+};
+
+static const struct ci_hdrc_imx_platform_flag imx28_usb_data = {
+	.flags = CI_HDRC_IMX28_WRITE_FIX |
+		CI_HDRC_TURN_VBUS_EARLY_ON |
+		CI_HDRC_DISABLE_STREAMING,
+};
+
+static const struct ci_hdrc_imx_platform_flag imx6q_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+		CI_HDRC_TURN_VBUS_EARLY_ON |
+		CI_HDRC_DISABLE_STREAMING,
+};
+
+static const struct ci_hdrc_imx_platform_flag imx6sl_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+		CI_HDRC_TURN_VBUS_EARLY_ON |
+		CI_HDRC_DISABLE_HOST_STREAMING,
+};
+
+static const struct ci_hdrc_imx_platform_flag imx6sx_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+		CI_HDRC_TURN_VBUS_EARLY_ON |
+		CI_HDRC_DISABLE_HOST_STREAMING,
+};
+
+static const struct ci_hdrc_imx_platform_flag imx6ul_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+		CI_HDRC_TURN_VBUS_EARLY_ON |
+		CI_HDRC_DISABLE_DEVICE_STREAMING,
+};
+
+static const struct ci_hdrc_imx_platform_flag imx7d_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM,
+};
+
+static const struct ci_hdrc_imx_platform_flag imx7ulp_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+		CI_HDRC_HAS_PORTSC_PEC_MISSED |
+		CI_HDRC_PMQOS,
+};
+
+static const struct ci_hdrc_imx_platform_flag imx8ulp_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+		CI_HDRC_HAS_PORTSC_PEC_MISSED,
+};
+
+static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
+	{ .compatible = "fsl,imx23-usb", .data = &imx23_usb_data},
+	{ .compatible = "fsl,imx28-usb", .data = &imx28_usb_data},
+	{ .compatible = "fsl,imx27-usb", .data = &imx27_usb_data},
+	{ .compatible = "fsl,imx6q-usb", .data = &imx6q_usb_data},
+	{ .compatible = "fsl,imx6sl-usb", .data = &imx6sl_usb_data},
+	{ .compatible = "fsl,imx6sx-usb", .data = &imx6sx_usb_data},
+	{ .compatible = "fsl,imx6ul-usb", .data = &imx6ul_usb_data},
+	{ .compatible = "fsl,imx7d-usb", .data = &imx7d_usb_data},
+	{ .compatible = "fsl,imx7ulp-usb", .data = &imx7ulp_usb_data},
+	{ .compatible = "fsl,imx8ulp-usb", .data = &imx8ulp_usb_data},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
+
+struct ci_hdrc_imx_data {
+	struct usb_phy *phy;
+	struct platform_device *ci_pdev;
+	struct clk *clk;
+	struct imx_usbmisc_data *usbmisc_data;
+	bool supports_runtime_pm;
+	bool override_phy_control;
+	bool in_lpm;
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *pinctrl_hsic_active;
+	struct regulator *hsic_pad_regulator;
+	/* SoC before i.mx6 (except imx23/imx28) needs three clks */
+	bool need_three_clks;
+	struct clk *clk_ipg;
+	struct clk *clk_ahb;
+	struct clk *clk_per;
+	/* --------------------------------- */
+	struct pm_qos_request pm_qos_req;
+	const struct ci_hdrc_imx_platform_flag *plat_data;
+};
+
+/* Common functions shared by usbmisc drivers */
+
+static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
+{
+	struct platform_device *misc_pdev;
+	struct device_node *np = dev->of_node;
+	struct of_phandle_args args;
+	struct imx_usbmisc_data *data;
+	int ret;
+
+	/*
+	 * In case the fsl,usbmisc property is not present this device doesn't
+	 * need usbmisc. Return NULL (which is no error here)
+	 */
+	if (!of_get_property(np, "fsl,usbmisc", NULL))
+		return NULL;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return ERR_PTR(-ENOMEM);
+
+	ret = of_parse_phandle_with_args(np, "fsl,usbmisc", "#index-cells",
+					0, &args);
+	if (ret) {
+		dev_err(dev, "Failed to parse property fsl,usbmisc, errno %d\n",
+			ret);
+		return ERR_PTR(ret);
+	}
+
+	data->index = args.args[0];
+
+	misc_pdev = of_find_device_by_node(args.np);
+	of_node_put(args.np);
+
+	if (!misc_pdev)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	if (!platform_get_drvdata(misc_pdev)) {
+		put_device(&misc_pdev->dev);
+		return ERR_PTR(-EPROBE_DEFER);
+	}
+	data->dev = &misc_pdev->dev;
+
+	/*
+	 * Check the various over current related properties. If over current
+	 * detection is disabled we're not interested in the polarity.
+	 */
+	if (of_find_property(np, "disable-over-current", NULL)) {
+		data->disable_oc = 1;
+	} else if (of_find_property(np, "over-current-active-high", NULL)) {
+		data->oc_pol_active_low = 0;
+		data->oc_pol_configured = 1;
+	} else if (of_find_property(np, "over-current-active-low", NULL)) {
+		data->oc_pol_active_low = 1;
+		data->oc_pol_configured = 1;
+	} else {
+		dev_warn(dev, "No over current polarity defined\n");
+	}
+
+	data->pwr_pol = of_property_read_bool(np, "power-active-high");
+	data->evdo = of_property_read_bool(np, "external-vbus-divider");
+
+	if (of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI)
+		data->ulpi = 1;
+
+	if (of_property_read_u32(np, "samsung,picophy-pre-emp-curr-control",
+			&data->emp_curr_control))
+		data->emp_curr_control = -1;
+	if (of_property_read_u32(np, "samsung,picophy-dc-vol-level-adjust",
+			&data->dc_vol_level_adjust))
+		data->dc_vol_level_adjust = -1;
+
+	return data;
+}
+
+/* End of common functions shared by usbmisc drivers*/
+static int imx_get_clks(struct device *dev)
+{
+	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+	int ret = 0;
+
+	data->clk_ipg = devm_clk_get(dev, "ipg");
+	if (IS_ERR(data->clk_ipg)) {
+		/* If the platform only needs one clocks */
+		data->clk = devm_clk_get(dev, NULL);
+		if (IS_ERR(data->clk)) {
+			ret = PTR_ERR(data->clk);
+			dev_err(dev,
+				"Failed to get clks, err=%ld,%ld\n",
+				PTR_ERR(data->clk), PTR_ERR(data->clk_ipg));
+			return ret;
+		}
+		return ret;
+	}
+
+	data->clk_ahb = devm_clk_get(dev, "ahb");
+	if (IS_ERR(data->clk_ahb)) {
+		ret = PTR_ERR(data->clk_ahb);
+		dev_err(dev,
+			"Failed to get ahb clock, err=%d\n", ret);
+		return ret;
+	}
+
+	data->clk_per = devm_clk_get(dev, "per");
+	if (IS_ERR(data->clk_per)) {
+		ret = PTR_ERR(data->clk_per);
+		dev_err(dev,
+			"Failed to get per clock, err=%d\n", ret);
+		return ret;
+	}
+
+	data->need_three_clks = true;
+	return ret;
+}
+
+static int imx_prepare_enable_clks(struct device *dev)
+{
+	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (data->need_three_clks) {
+		ret = clk_prepare_enable(data->clk_ipg);
+		if (ret) {
+			dev_err(dev,
+				"Failed to prepare/enable ipg clk, err=%d\n",
+				ret);
+			return ret;
+		}
+
+		ret = clk_prepare_enable(data->clk_ahb);
+		if (ret) {
+			dev_err(dev,
+				"Failed to prepare/enable ahb clk, err=%d\n",
+				ret);
+			clk_disable_unprepare(data->clk_ipg);
+			return ret;
+		}
+
+		ret = clk_prepare_enable(data->clk_per);
+		if (ret) {
+			dev_err(dev,
+				"Failed to prepare/enable per clk, err=%d\n",
+				ret);
+			clk_disable_unprepare(data->clk_ahb);
+			clk_disable_unprepare(data->clk_ipg);
+			return ret;
+		}
+	} else {
+		ret = clk_prepare_enable(data->clk);
+		if (ret) {
+			dev_err(dev,
+				"Failed to prepare/enable clk, err=%d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+static void imx_disable_unprepare_clks(struct device *dev)
+{
+	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+
+	if (data->need_three_clks) {
+		clk_disable_unprepare(data->clk_per);
+		clk_disable_unprepare(data->clk_ahb);
+		clk_disable_unprepare(data->clk_ipg);
+	} else {
+		clk_disable_unprepare(data->clk);
+	}
+}
+
+static int ci_hdrc_imx_notify_event(struct ci_hdrc *ci, unsigned int event)
+{
+	struct device *dev = ci->dev->parent;
+	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+	int ret = 0;
+	struct imx_usbmisc_data *mdata = data->usbmisc_data;
+
+	switch (event) {
+	case CI_HDRC_IMX_HSIC_ACTIVE_EVENT:
+		if (data->pinctrl) {
+			ret = pinctrl_select_state(data->pinctrl,
+					data->pinctrl_hsic_active);
+			if (ret)
+				dev_err(dev,
+					"hsic_active select failed, err=%d\n",
+					ret);
+		}
+		break;
+	case CI_HDRC_IMX_HSIC_SUSPEND_EVENT:
+		ret = imx_usbmisc_hsic_set_connect(mdata);
+		if (ret)
+			dev_err(dev,
+				"hsic_set_connect failed, err=%d\n", ret);
+		break;
+	case CI_HDRC_CONTROLLER_VBUS_EVENT:
+		if (ci->vbus_active)
+			ret = imx_usbmisc_charger_detection(mdata, true);
+		else
+			ret = imx_usbmisc_charger_detection(mdata, false);
+		if (ci->usb_phy)
+			schedule_work(&ci->usb_phy->chg_work);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static int ci_hdrc_imx_probe(struct platform_device *pdev)
+{
+	struct ci_hdrc_imx_data *data;
+	struct ci_hdrc_platform_data pdata = {
+		.name		= dev_name(&pdev->dev),
+		.capoffset	= DEF_CAPOFFSET,
+		.notify_event	= ci_hdrc_imx_notify_event,
+	};
+	int ret;
+	const struct ci_hdrc_imx_platform_flag *imx_platform_flag;
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+
+	imx_platform_flag = of_device_get_match_data(&pdev->dev);
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->plat_data = imx_platform_flag;
+	pdata.flags |= imx_platform_flag->flags;
+	platform_set_drvdata(pdev, data);
+	data->usbmisc_data = usbmisc_get_init_data(dev);
+	if (IS_ERR(data->usbmisc_data))
+		return PTR_ERR(data->usbmisc_data);
+
+	if ((of_usb_get_phy_mode(dev->of_node) == USBPHY_INTERFACE_MODE_HSIC)
+		&& data->usbmisc_data) {
+		pdata.flags |= CI_HDRC_IMX_IS_HSIC;
+		data->usbmisc_data->hsic = 1;
+		data->pinctrl = devm_pinctrl_get(dev);
+		if (PTR_ERR(data->pinctrl) == -ENODEV)
+			data->pinctrl = NULL;
+		else if (IS_ERR(data->pinctrl))
+			return dev_err_probe(dev, PTR_ERR(data->pinctrl),
+					     "pinctrl get failed\n");
+
+		data->hsic_pad_regulator =
+				devm_regulator_get_optional(dev, "hsic");
+		if (PTR_ERR(data->hsic_pad_regulator) == -ENODEV) {
+			/* no pad regualator is needed */
+			data->hsic_pad_regulator = NULL;
+		} else if (IS_ERR(data->hsic_pad_regulator))
+			return dev_err_probe(dev, PTR_ERR(data->hsic_pad_regulator),
+					     "Get HSIC pad regulator error\n");
+
+		if (data->hsic_pad_regulator) {
+			ret = regulator_enable(data->hsic_pad_regulator);
+			if (ret) {
+				dev_err(dev,
+					"Failed to enable HSIC pad regulator\n");
+				return ret;
+			}
+		}
+	}
+
+	/* HSIC pinctrl handling */
+	if (data->pinctrl) {
+		struct pinctrl_state *pinctrl_hsic_idle;
+
+		pinctrl_hsic_idle = pinctrl_lookup_state(data->pinctrl, "idle");
+		if (IS_ERR(pinctrl_hsic_idle)) {
+			dev_err(dev,
+				"pinctrl_hsic_idle lookup failed, err=%ld\n",
+					PTR_ERR(pinctrl_hsic_idle));
+			return PTR_ERR(pinctrl_hsic_idle);
+		}
+
+		ret = pinctrl_select_state(data->pinctrl, pinctrl_hsic_idle);
+		if (ret) {
+			dev_err(dev, "hsic_idle select failed, err=%d\n", ret);
+			return ret;
+		}
+
+		data->pinctrl_hsic_active = pinctrl_lookup_state(data->pinctrl,
+								"active");
+		if (IS_ERR(data->pinctrl_hsic_active)) {
+			dev_err(dev,
+				"pinctrl_hsic_active lookup failed, err=%ld\n",
+					PTR_ERR(data->pinctrl_hsic_active));
+			return PTR_ERR(data->pinctrl_hsic_active);
+		}
+	}
+
+	if (pdata.flags & CI_HDRC_PMQOS)
+		cpu_latency_qos_add_request(&data->pm_qos_req, 0);
+
+	ret = imx_get_clks(dev);
+	if (ret)
+		goto disable_hsic_regulator;
+
+	ret = imx_prepare_enable_clks(dev);
+	if (ret)
+		goto disable_hsic_regulator;
+
+	data->phy = devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0);
+	if (IS_ERR(data->phy)) {
+		ret = PTR_ERR(data->phy);
+		if (ret != -ENODEV)
+			goto err_clk;
+		data->phy = devm_usb_get_phy_by_phandle(dev, "phys", 0);
+		if (IS_ERR(data->phy)) {
+			ret = PTR_ERR(data->phy);
+			if (ret == -ENODEV)
+				data->phy = NULL;
+			else
+				goto err_clk;
+		}
+	}
+
+	pdata.usb_phy = data->phy;
+	if (data->usbmisc_data)
+		data->usbmisc_data->usb_phy = data->phy;
+
+	if ((of_device_is_compatible(np, "fsl,imx53-usb") ||
+	     of_device_is_compatible(np, "fsl,imx51-usb")) && pdata.usb_phy &&
+	    of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI) {
+		pdata.flags |= CI_HDRC_OVERRIDE_PHY_CONTROL;
+		data->override_phy_control = true;
+		usb_phy_init(pdata.usb_phy);
+	}
+
+	if (pdata.flags & CI_HDRC_SUPPORTS_RUNTIME_PM)
+		data->supports_runtime_pm = true;
+
+	ret = imx_usbmisc_init(data->usbmisc_data);
+	if (ret) {
+		dev_err(dev, "usbmisc init failed, ret=%d\n", ret);
+		goto err_clk;
+	}
+
+	data->ci_pdev = ci_hdrc_add_device(dev,
+				pdev->resource, pdev->num_resources,
+				&pdata);
+	if (IS_ERR(data->ci_pdev)) {
+		ret = PTR_ERR(data->ci_pdev);
+		dev_err_probe(dev, ret, "ci_hdrc_add_device failed\n");
+		goto err_clk;
+	}
+
+	if (data->usbmisc_data) {
+		if (!IS_ERR(pdata.id_extcon.edev) ||
+		    of_property_read_bool(np, "usb-role-switch"))
+			data->usbmisc_data->ext_id = 1;
+
+		if (!IS_ERR(pdata.vbus_extcon.edev) ||
+		    of_property_read_bool(np, "usb-role-switch"))
+			data->usbmisc_data->ext_vbus = 1;
+
+		/* usbmisc needs to know dr mode to choose wakeup setting */
+		data->usbmisc_data->available_role =
+			ci_hdrc_query_available_role(data->ci_pdev);
+	}
+
+	ret = imx_usbmisc_init_post(data->usbmisc_data);
+	if (ret) {
+		dev_err(dev, "usbmisc post failed, ret=%d\n", ret);
+		goto disable_device;
+	}
+
+	if (data->supports_runtime_pm) {
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	device_set_wakeup_capable(dev, true);
+
+	return 0;
+
+disable_device:
+	ci_hdrc_remove_device(data->ci_pdev);
+err_clk:
+	imx_disable_unprepare_clks(dev);
+disable_hsic_regulator:
+	if (data->hsic_pad_regulator)
+		/* don't overwrite original ret (cf. EPROBE_DEFER) */
+		regulator_disable(data->hsic_pad_regulator);
+	if (pdata.flags & CI_HDRC_PMQOS)
+		cpu_latency_qos_remove_request(&data->pm_qos_req);
+	data->ci_pdev = NULL;
+	return ret;
+}
+
+static int ci_hdrc_imx_remove(struct platform_device *pdev)
+{
+	struct ci_hdrc_imx_data *data = platform_get_drvdata(pdev);
+
+	if (data->supports_runtime_pm) {
+		pm_runtime_get_sync(&pdev->dev);
+		pm_runtime_disable(&pdev->dev);
+		pm_runtime_put_noidle(&pdev->dev);
+	}
+	if (data->ci_pdev)
+		ci_hdrc_remove_device(data->ci_pdev);
+	if (data->override_phy_control)
+		usb_phy_shutdown(data->phy);
+	if (data->ci_pdev) {
+		imx_disable_unprepare_clks(&pdev->dev);
+		if (data->plat_data->flags & CI_HDRC_PMQOS)
+			cpu_latency_qos_remove_request(&data->pm_qos_req);
+		if (data->hsic_pad_regulator)
+			regulator_disable(data->hsic_pad_regulator);
+	}
+
+	return 0;
+}
+
+static void ci_hdrc_imx_shutdown(struct platform_device *pdev)
+{
+	ci_hdrc_imx_remove(pdev);
+}
+
+static int __maybe_unused imx_controller_suspend(struct device *dev)
+{
+	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+	int ret = 0;
+
+	dev_dbg(dev, "at %s\n", __func__);
+
+	ret = imx_usbmisc_hsic_set_clk(data->usbmisc_data, false);
+	if (ret) {
+		dev_err(dev, "usbmisc hsic_set_clk failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	imx_disable_unprepare_clks(dev);
+	if (data->plat_data->flags & CI_HDRC_PMQOS)
+		cpu_latency_qos_remove_request(&data->pm_qos_req);
+
+	data->in_lpm = true;
+
+	return 0;
+}
+
+static int __maybe_unused imx_controller_resume(struct device *dev)
+{
+	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+	int ret = 0;
+
+	dev_dbg(dev, "at %s\n", __func__);
+
+	if (!data->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	if (data->plat_data->flags & CI_HDRC_PMQOS)
+		cpu_latency_qos_add_request(&data->pm_qos_req, 0);
+
+	ret = imx_prepare_enable_clks(dev);
+	if (ret)
+		return ret;
+
+	data->in_lpm = false;
+
+	ret = imx_usbmisc_set_wakeup(data->usbmisc_data, false);
+	if (ret) {
+		dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n", ret);
+		goto clk_disable;
+	}
+
+	ret = imx_usbmisc_hsic_set_clk(data->usbmisc_data, true);
+	if (ret) {
+		dev_err(dev, "usbmisc hsic_set_clk failed, ret=%d\n", ret);
+		goto hsic_set_clk_fail;
+	}
+
+	return 0;
+
+hsic_set_clk_fail:
+	imx_usbmisc_set_wakeup(data->usbmisc_data, true);
+clk_disable:
+	imx_disable_unprepare_clks(dev);
+	return ret;
+}
+
+static int __maybe_unused ci_hdrc_imx_suspend(struct device *dev)
+{
+	int ret;
+
+	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+
+	if (data->in_lpm)
+		/* The core's suspend doesn't run */
+		return 0;
+
+	if (device_may_wakeup(dev)) {
+		ret = imx_usbmisc_set_wakeup(data->usbmisc_data, true);
+		if (ret) {
+			dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n",
+					ret);
+			return ret;
+		}
+	}
+
+	ret = imx_controller_suspend(dev);
+	if (ret)
+		return ret;
+
+	pinctrl_pm_select_sleep_state(dev);
+	return ret;
+}
+
+static int __maybe_unused ci_hdrc_imx_resume(struct device *dev)
+{
+	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	pinctrl_pm_select_default_state(dev);
+	ret = imx_controller_resume(dev);
+	if (!ret && data->supports_runtime_pm) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return ret;
+}
+
+static int __maybe_unused ci_hdrc_imx_runtime_suspend(struct device *dev)
+{
+	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	if (data->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	ret = imx_usbmisc_set_wakeup(data->usbmisc_data, true);
+	if (ret) {
+		dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	return imx_controller_suspend(dev);
+}
+
+static int __maybe_unused ci_hdrc_imx_runtime_resume(struct device *dev)
+{
+	return imx_controller_resume(dev);
+}
+
+static const struct dev_pm_ops ci_hdrc_imx_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(ci_hdrc_imx_suspend, ci_hdrc_imx_resume)
+	SET_RUNTIME_PM_OPS(ci_hdrc_imx_runtime_suspend,
+			ci_hdrc_imx_runtime_resume, NULL)
+};
+static struct platform_driver ci_hdrc_imx_driver = {
+	.probe = ci_hdrc_imx_probe,
+	.remove = ci_hdrc_imx_remove,
+	.shutdown = ci_hdrc_imx_shutdown,
+	.driver = {
+		.name = "imx_usb",
+		.of_match_table = ci_hdrc_imx_dt_ids,
+		.pm = &ci_hdrc_imx_pm_ops,
+	 },
+};
+
+module_platform_driver(ci_hdrc_imx_driver);
+
+MODULE_ALIAS("platform:imx-usb");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("CI HDRC i.MX USB binding");
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h
new file mode 100644
index 000000000..7daccb9c5
--- /dev/null
+++ b/drivers/usb/chipidea/ci_hdrc_imx.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H
+#define __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H
+
+struct imx_usbmisc_data {
+	struct device *dev;
+	int index;
+
+	unsigned int disable_oc:1; /* over current detect disabled */
+
+	/* true if over-current polarity is active low */
+	unsigned int oc_pol_active_low:1;
+
+	/* true if dt specifies polarity */
+	unsigned int oc_pol_configured:1;
+
+	unsigned int pwr_pol:1; /* power polarity */
+	unsigned int evdo:1; /* set external vbus divider option */
+	unsigned int ulpi:1; /* connected to an ULPI phy */
+	unsigned int hsic:1; /* HSIC controller */
+	unsigned int ext_id:1; /* ID from exteranl event */
+	unsigned int ext_vbus:1; /* Vbus from exteranl event */
+	struct usb_phy *usb_phy;
+	enum usb_dr_mode available_role; /* runtime usb dr mode */
+	int emp_curr_control;
+	int dc_vol_level_adjust;
+};
+
+int imx_usbmisc_init(struct imx_usbmisc_data *data);
+int imx_usbmisc_init_post(struct imx_usbmisc_data *data);
+int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled);
+int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data);
+int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on);
+int imx_usbmisc_charger_detection(struct imx_usbmisc_data *data, bool connect);
+
+#endif /* __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H */
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
new file mode 100644
index 000000000..46105457e
--- /dev/null
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/usb/chipidea.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/io.h>
+#include <linux/reset-controller.h>
+#include <linux/extcon.h>
+#include <linux/of.h>
+
+#include "ci.h"
+
+#define HS_PHY_AHB_MODE			0x0098
+
+#define HS_PHY_GENCONFIG		0x009c
+#define HS_PHY_TXFIFO_IDLE_FORCE_DIS	BIT(4)
+
+#define HS_PHY_GENCONFIG_2		0x00a0
+#define HS_PHY_SESS_VLD_CTRL_EN		BIT(7)
+#define HS_PHY_ULPI_TX_PKT_EN_CLR_FIX	BIT(19)
+
+#define HSPHY_SESS_VLD_CTRL		BIT(25)
+
+/* Vendor base starts at 0x200 beyond CI base */
+#define HS_PHY_CTRL			0x0040
+#define HS_PHY_SEC_CTRL			0x0078
+#define HS_PHY_DIG_CLAMP_N		BIT(16)
+#define HS_PHY_POR_ASSERT		BIT(0)
+
+struct ci_hdrc_msm {
+	struct platform_device *ci;
+	struct clk *core_clk;
+	struct clk *iface_clk;
+	struct clk *fs_clk;
+	struct ci_hdrc_platform_data pdata;
+	struct reset_controller_dev rcdev;
+	bool secondary_phy;
+	bool hsic;
+	void __iomem *base;
+};
+
+static int
+ci_hdrc_msm_por_reset(struct reset_controller_dev *r, unsigned long id)
+{
+	struct ci_hdrc_msm *ci_msm = container_of(r, struct ci_hdrc_msm, rcdev);
+	void __iomem *addr = ci_msm->base;
+	u32 val;
+
+	if (id)
+		addr += HS_PHY_SEC_CTRL;
+	else
+		addr += HS_PHY_CTRL;
+
+	val = readl_relaxed(addr);
+	val |= HS_PHY_POR_ASSERT;
+	writel(val, addr);
+	/*
+	 * wait for minimum 10 microseconds as suggested by manual.
+	 * Use a slightly larger value since the exact value didn't
+	 * work 100% of the time.
+	 */
+	udelay(12);
+	val &= ~HS_PHY_POR_ASSERT;
+	writel(val, addr);
+
+	return 0;
+}
+
+static const struct reset_control_ops ci_hdrc_msm_reset_ops = {
+	.reset = ci_hdrc_msm_por_reset,
+};
+
+static int ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
+{
+	struct device *dev = ci->dev->parent;
+	struct ci_hdrc_msm *msm_ci = dev_get_drvdata(dev);
+	int ret;
+
+	switch (event) {
+	case CI_HDRC_CONTROLLER_RESET_EVENT:
+		dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
+
+		hw_phymode_configure(ci);
+		if (msm_ci->secondary_phy) {
+			u32 val = readl_relaxed(msm_ci->base + HS_PHY_SEC_CTRL);
+			val |= HS_PHY_DIG_CLAMP_N;
+			writel_relaxed(val, msm_ci->base + HS_PHY_SEC_CTRL);
+		}
+
+		ret = phy_init(ci->phy);
+		if (ret)
+			return ret;
+
+		ret = phy_power_on(ci->phy);
+		if (ret) {
+			phy_exit(ci->phy);
+			return ret;
+		}
+
+		/* use AHB transactor, allow posted data writes */
+		hw_write_id_reg(ci, HS_PHY_AHB_MODE, 0xffffffff, 0x8);
+
+		/* workaround for rx buffer collision issue */
+		hw_write_id_reg(ci, HS_PHY_GENCONFIG,
+				HS_PHY_TXFIFO_IDLE_FORCE_DIS, 0);
+
+		if (!msm_ci->hsic)
+			hw_write_id_reg(ci, HS_PHY_GENCONFIG_2,
+					HS_PHY_ULPI_TX_PKT_EN_CLR_FIX, 0);
+
+		if (!IS_ERR(ci->platdata->vbus_extcon.edev) || ci->role_switch) {
+			hw_write_id_reg(ci, HS_PHY_GENCONFIG_2,
+					HS_PHY_SESS_VLD_CTRL_EN,
+					HS_PHY_SESS_VLD_CTRL_EN);
+			hw_write(ci, OP_USBCMD, HSPHY_SESS_VLD_CTRL,
+				 HSPHY_SESS_VLD_CTRL);
+
+		}
+		break;
+	case CI_HDRC_CONTROLLER_STOPPED_EVENT:
+		dev_dbg(dev, "CI_HDRC_CONTROLLER_STOPPED_EVENT received\n");
+		phy_power_off(ci->phy);
+		phy_exit(ci->phy);
+		break;
+	default:
+		dev_dbg(dev, "unknown ci_hdrc event\n");
+		break;
+	}
+
+	return 0;
+}
+
+static int ci_hdrc_msm_mux_phy(struct ci_hdrc_msm *ci,
+			       struct platform_device *pdev)
+{
+	struct regmap *regmap;
+	struct device *dev = &pdev->dev;
+	struct of_phandle_args args;
+	u32 val;
+	int ret;
+
+	ret = of_parse_phandle_with_fixed_args(dev->of_node, "phy-select", 2, 0,
+					       &args);
+	if (ret)
+		return 0;
+
+	regmap = syscon_node_to_regmap(args.np);
+	of_node_put(args.np);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	ret = regmap_write(regmap, args.args[0], args.args[1]);
+	if (ret)
+		return ret;
+
+	ci->secondary_phy = !!args.args[1];
+	if (ci->secondary_phy) {
+		val = readl_relaxed(ci->base + HS_PHY_SEC_CTRL);
+		val |= HS_PHY_DIG_CLAMP_N;
+		writel_relaxed(val, ci->base + HS_PHY_SEC_CTRL);
+	}
+
+	return 0;
+}
+
+static int ci_hdrc_msm_probe(struct platform_device *pdev)
+{
+	struct ci_hdrc_msm *ci;
+	struct platform_device *plat_ci;
+	struct clk *clk;
+	struct reset_control *reset;
+	int ret;
+	struct device_node *ulpi_node, *phy_node;
+
+	dev_dbg(&pdev->dev, "ci_hdrc_msm_probe\n");
+
+	ci = devm_kzalloc(&pdev->dev, sizeof(*ci), GFP_KERNEL);
+	if (!ci)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, ci);
+
+	ci->pdata.name = "ci_hdrc_msm";
+	ci->pdata.capoffset = DEF_CAPOFFSET;
+	ci->pdata.flags	= CI_HDRC_REGS_SHARED | CI_HDRC_DISABLE_STREAMING |
+			  CI_HDRC_OVERRIDE_AHB_BURST |
+			  CI_HDRC_OVERRIDE_PHY_CONTROL;
+	ci->pdata.notify_event = ci_hdrc_msm_notify_event;
+
+	reset = devm_reset_control_get(&pdev->dev, "core");
+	if (IS_ERR(reset))
+		return PTR_ERR(reset);
+
+	ci->core_clk = clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	ci->iface_clk = clk = devm_clk_get(&pdev->dev, "iface");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	ci->fs_clk = clk = devm_clk_get_optional(&pdev->dev, "fs");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	ci->base = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(ci->base))
+		return PTR_ERR(ci->base);
+
+	ci->rcdev.owner = THIS_MODULE;
+	ci->rcdev.ops = &ci_hdrc_msm_reset_ops;
+	ci->rcdev.of_node = pdev->dev.of_node;
+	ci->rcdev.nr_resets = 2;
+	ret = devm_reset_controller_register(&pdev->dev, &ci->rcdev);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(ci->fs_clk);
+	if (ret)
+		return ret;
+
+	reset_control_assert(reset);
+	usleep_range(10000, 12000);
+	reset_control_deassert(reset);
+
+	clk_disable_unprepare(ci->fs_clk);
+
+	ret = clk_prepare_enable(ci->core_clk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(ci->iface_clk);
+	if (ret)
+		goto err_iface;
+
+	ret = ci_hdrc_msm_mux_phy(ci, pdev);
+	if (ret)
+		goto err_mux;
+
+	ulpi_node = of_get_child_by_name(pdev->dev.of_node, "ulpi");
+	if (ulpi_node) {
+		phy_node = of_get_next_available_child(ulpi_node, NULL);
+		ci->hsic = of_device_is_compatible(phy_node, "qcom,usb-hsic-phy");
+		of_node_put(phy_node);
+	}
+	of_node_put(ulpi_node);
+
+	plat_ci = ci_hdrc_add_device(&pdev->dev, pdev->resource,
+				     pdev->num_resources, &ci->pdata);
+	if (IS_ERR(plat_ci)) {
+		ret = PTR_ERR(plat_ci);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
+		goto err_mux;
+	}
+
+	ci->ci = plat_ci;
+
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_no_callbacks(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+
+err_mux:
+	clk_disable_unprepare(ci->iface_clk);
+err_iface:
+	clk_disable_unprepare(ci->core_clk);
+	return ret;
+}
+
+static int ci_hdrc_msm_remove(struct platform_device *pdev)
+{
+	struct ci_hdrc_msm *ci = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(&pdev->dev);
+	ci_hdrc_remove_device(ci->ci);
+	clk_disable_unprepare(ci->iface_clk);
+	clk_disable_unprepare(ci->core_clk);
+
+	return 0;
+}
+
+static const struct of_device_id msm_ci_dt_match[] = {
+	{ .compatible = "qcom,ci-hdrc", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, msm_ci_dt_match);
+
+static struct platform_driver ci_hdrc_msm_driver = {
+	.probe = ci_hdrc_msm_probe,
+	.remove = ci_hdrc_msm_remove,
+	.driver = {
+		.name = "msm_hsusb",
+		.of_match_table = msm_ci_dt_match,
+	},
+};
+
+module_platform_driver(ci_hdrc_msm_driver);
+
+MODULE_ALIAS("platform:msm_hsusb");
+MODULE_ALIAS("platform:ci13xxx_msm");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/chipidea/ci_hdrc_pci.c b/drivers/usb/chipidea/ci_hdrc_pci.c
new file mode 100644
index 000000000..d63479e1a
--- /dev/null
+++ b/drivers/usb/chipidea/ci_hdrc_pci.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ci_hdrc_pci.c - MIPS USB IP core family device controller
+ *
+ * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ *
+ * Author: David Lopo
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/chipidea.h>
+#include <linux/usb/usb_phy_generic.h>
+
+/* driver name */
+#define UDC_DRIVER_NAME   "ci_hdrc_pci"
+
+struct ci_hdrc_pci {
+	struct platform_device	*ci;
+	struct platform_device	*phy;
+};
+
+/******************************************************************************
+ * PCI block
+ *****************************************************************************/
+static struct ci_hdrc_platform_data pci_platdata = {
+	.name		= UDC_DRIVER_NAME,
+	.capoffset	= DEF_CAPOFFSET,
+};
+
+static struct ci_hdrc_platform_data langwell_pci_platdata = {
+	.name		= UDC_DRIVER_NAME,
+	.capoffset	= 0,
+};
+
+static struct ci_hdrc_platform_data penwell_pci_platdata = {
+	.name		= UDC_DRIVER_NAME,
+	.capoffset	= 0,
+	.power_budget	= 200,
+};
+
+/**
+ * ci_hdrc_pci_probe: PCI probe
+ * @pdev: USB device controller being probed
+ * @id:   PCI hotplug ID connecting controller to UDC framework
+ *
+ * This function returns an error code
+ * Allocates basic PCI resources for this USB device controller, and then
+ * invokes the udc_probe() method to start the UDC associated with it
+ */
+static int ci_hdrc_pci_probe(struct pci_dev *pdev,
+				       const struct pci_device_id *id)
+{
+	struct ci_hdrc_platform_data *platdata = (void *)id->driver_data;
+	struct ci_hdrc_pci *ci;
+	struct resource res[3];
+	int retval = 0, nres = 2;
+
+	if (!platdata) {
+		dev_err(&pdev->dev, "device doesn't provide driver data\n");
+		return -ENODEV;
+	}
+
+	ci = devm_kzalloc(&pdev->dev, sizeof(*ci), GFP_KERNEL);
+	if (!ci)
+		return -ENOMEM;
+
+	retval = pcim_enable_device(pdev);
+	if (retval)
+		return retval;
+
+	if (!pdev->irq) {
+		dev_err(&pdev->dev, "No IRQ, check BIOS/PCI setup!");
+		return -ENODEV;
+	}
+
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
+	/* register a nop PHY */
+	ci->phy = usb_phy_generic_register();
+	if (IS_ERR(ci->phy))
+		return PTR_ERR(ci->phy);
+
+	memset(res, 0, sizeof(res));
+	res[0].start	= pci_resource_start(pdev, 0);
+	res[0].end	= pci_resource_end(pdev, 0);
+	res[0].flags	= IORESOURCE_MEM;
+	res[1].start	= pdev->irq;
+	res[1].flags	= IORESOURCE_IRQ;
+
+	ci->ci = ci_hdrc_add_device(&pdev->dev, res, nres, platdata);
+	if (IS_ERR(ci->ci)) {
+		dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
+		usb_phy_generic_unregister(ci->phy);
+		return PTR_ERR(ci->ci);
+	}
+
+	pci_set_drvdata(pdev, ci);
+
+	return 0;
+}
+
+/**
+ * ci_hdrc_pci_remove: PCI remove
+ * @pdev: USB Device Controller being removed
+ *
+ * Reverses the effect of ci_hdrc_pci_probe(),
+ * first invoking the udc_remove() and then releases
+ * all PCI resources allocated for this USB device controller
+ */
+static void ci_hdrc_pci_remove(struct pci_dev *pdev)
+{
+	struct ci_hdrc_pci *ci = pci_get_drvdata(pdev);
+
+	ci_hdrc_remove_device(ci->ci);
+	usb_phy_generic_unregister(ci->phy);
+}
+
+/*
+ * PCI device table
+ * PCI device structure
+ *
+ * Check "pci.h" for details
+ *
+ * Note: ehci-pci driver may try to probe the device first. You have to add an
+ * ID to the bypass_pci_id_table in ehci-pci driver to prevent this.
+ */
+static const struct pci_device_id ci_hdrc_pci_id_table[] = {
+	{
+		PCI_DEVICE(0x153F, 0x1004),
+		.driver_data = (kernel_ulong_t)&pci_platdata,
+	},
+	{
+		PCI_DEVICE(0x153F, 0x1006),
+		.driver_data = (kernel_ulong_t)&pci_platdata,
+	},
+	{
+		PCI_VDEVICE(INTEL, 0x0811),
+		.driver_data = (kernel_ulong_t)&langwell_pci_platdata,
+	},
+	{
+		PCI_VDEVICE(INTEL, 0x0829),
+		.driver_data = (kernel_ulong_t)&penwell_pci_platdata,
+	},
+	{
+		/* Intel Clovertrail */
+		PCI_VDEVICE(INTEL, 0xe006),
+		.driver_data = (kernel_ulong_t)&penwell_pci_platdata,
+	},
+	{ 0 } /* end: all zeroes */
+};
+MODULE_DEVICE_TABLE(pci, ci_hdrc_pci_id_table);
+
+static struct pci_driver ci_hdrc_pci_driver = {
+	.name         =	UDC_DRIVER_NAME,
+	.id_table     =	ci_hdrc_pci_id_table,
+	.probe        =	ci_hdrc_pci_probe,
+	.remove       =	ci_hdrc_pci_remove,
+};
+
+module_pci_driver(ci_hdrc_pci_driver);
+
+MODULE_AUTHOR("MIPS - David Lopo <dlopo@chipidea.mips.com>");
+MODULE_DESCRIPTION("MIPS CI13XXX USB Peripheral Controller");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ci13xxx_pci");
diff --git a/drivers/usb/chipidea/ci_hdrc_tegra.c b/drivers/usb/chipidea/ci_hdrc_tegra.c
new file mode 100644
index 000000000..a72a9474a
--- /dev/null
+++ b/drivers/usb/chipidea/ci_hdrc_tegra.c
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2016, NVIDIA Corporation
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#include <linux/usb.h>
+#include <linux/usb/chipidea.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/of.h>
+#include <linux/usb/phy.h>
+
+#include <soc/tegra/common.h>
+
+#include "../host/ehci.h"
+
+#include "ci.h"
+
+struct tegra_usb {
+	struct ci_hdrc_platform_data data;
+	struct platform_device *dev;
+
+	const struct tegra_usb_soc_info *soc;
+	struct usb_phy *phy;
+	struct clk *clk;
+
+	bool needs_double_reset;
+};
+
+struct tegra_usb_soc_info {
+	unsigned long flags;
+	unsigned int txfifothresh;
+	enum usb_dr_mode dr_mode;
+};
+
+static const struct tegra_usb_soc_info tegra20_ehci_soc_info = {
+	.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
+		 CI_HDRC_OVERRIDE_PHY_CONTROL |
+		 CI_HDRC_SUPPORTS_RUNTIME_PM,
+	.dr_mode = USB_DR_MODE_HOST,
+	.txfifothresh = 10,
+};
+
+static const struct tegra_usb_soc_info tegra30_ehci_soc_info = {
+	.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
+		 CI_HDRC_OVERRIDE_PHY_CONTROL |
+		 CI_HDRC_SUPPORTS_RUNTIME_PM,
+	.dr_mode = USB_DR_MODE_HOST,
+	.txfifothresh = 16,
+};
+
+static const struct tegra_usb_soc_info tegra20_udc_soc_info = {
+	.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
+		 CI_HDRC_OVERRIDE_PHY_CONTROL |
+		 CI_HDRC_SUPPORTS_RUNTIME_PM,
+	.dr_mode = USB_DR_MODE_UNKNOWN,
+	.txfifothresh = 10,
+};
+
+static const struct tegra_usb_soc_info tegra30_udc_soc_info = {
+	.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
+		 CI_HDRC_OVERRIDE_PHY_CONTROL |
+		 CI_HDRC_SUPPORTS_RUNTIME_PM,
+	.dr_mode = USB_DR_MODE_UNKNOWN,
+	.txfifothresh = 16,
+};
+
+static const struct of_device_id tegra_usb_of_match[] = {
+	{
+		.compatible = "nvidia,tegra20-ehci",
+		.data = &tegra20_ehci_soc_info,
+	}, {
+		.compatible = "nvidia,tegra30-ehci",
+		.data = &tegra30_ehci_soc_info,
+	}, {
+		.compatible = "nvidia,tegra20-udc",
+		.data = &tegra20_udc_soc_info,
+	}, {
+		.compatible = "nvidia,tegra30-udc",
+		.data = &tegra30_udc_soc_info,
+	}, {
+		.compatible = "nvidia,tegra114-udc",
+		.data = &tegra30_udc_soc_info,
+	}, {
+		.compatible = "nvidia,tegra124-udc",
+		.data = &tegra30_udc_soc_info,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, tegra_usb_of_match);
+
+static int tegra_usb_reset_controller(struct device *dev)
+{
+	struct reset_control *rst, *rst_utmi;
+	struct device_node *phy_np;
+	int err;
+
+	rst = devm_reset_control_get_shared(dev, "usb");
+	if (IS_ERR(rst)) {
+		dev_err(dev, "can't get ehci reset: %pe\n", rst);
+		return PTR_ERR(rst);
+	}
+
+	phy_np = of_parse_phandle(dev->of_node, "nvidia,phy", 0);
+	if (!phy_np)
+		return -ENOENT;
+
+	/*
+	 * The 1st USB controller contains some UTMI pad registers that are
+	 * global for all the controllers on the chip. Those registers are
+	 * also cleared when reset is asserted to the 1st controller.
+	 */
+	rst_utmi = of_reset_control_get_shared(phy_np, "utmi-pads");
+	if (IS_ERR(rst_utmi)) {
+		dev_warn(dev, "can't get utmi-pads reset from the PHY\n");
+		dev_warn(dev, "continuing, but please update your DT\n");
+	} else {
+		/*
+		 * PHY driver performs UTMI-pads reset in a case of a
+		 * non-legacy DT.
+		 */
+		reset_control_put(rst_utmi);
+	}
+
+	of_node_put(phy_np);
+
+	/* reset control is shared, hence initialize it first */
+	err = reset_control_deassert(rst);
+	if (err)
+		return err;
+
+	err = reset_control_assert(rst);
+	if (err)
+		return err;
+
+	udelay(1);
+
+	err = reset_control_deassert(rst);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int tegra_usb_notify_event(struct ci_hdrc *ci, unsigned int event)
+{
+	struct tegra_usb *usb = dev_get_drvdata(ci->dev->parent);
+	struct ehci_hcd *ehci;
+
+	switch (event) {
+	case CI_HDRC_CONTROLLER_RESET_EVENT:
+		if (ci->hcd) {
+			ehci = hcd_to_ehci(ci->hcd);
+			ehci->has_tdi_phy_lpm = false;
+			ehci_writel(ehci, usb->soc->txfifothresh << 16,
+				    &ehci->regs->txfill_tuning);
+		}
+		break;
+	}
+
+	return 0;
+}
+
+static int tegra_usb_internal_port_reset(struct ehci_hcd *ehci,
+					 u32 __iomem *portsc_reg,
+					 unsigned long *flags)
+{
+	u32 saved_usbintr, temp;
+	unsigned int i, tries;
+	int retval = 0;
+
+	saved_usbintr = ehci_readl(ehci, &ehci->regs->intr_enable);
+	/* disable USB interrupt */
+	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+	spin_unlock_irqrestore(&ehci->lock, *flags);
+
+	/*
+	 * Here we have to do Port Reset at most twice for
+	 * Port Enable bit to be set.
+	 */
+	for (i = 0; i < 2; i++) {
+		temp = ehci_readl(ehci, portsc_reg);
+		temp |= PORT_RESET;
+		ehci_writel(ehci, temp, portsc_reg);
+		fsleep(10000);
+		temp &= ~PORT_RESET;
+		ehci_writel(ehci, temp, portsc_reg);
+		fsleep(1000);
+		tries = 100;
+		do {
+			fsleep(1000);
+			/*
+			 * Up to this point, Port Enable bit is
+			 * expected to be set after 2 ms waiting.
+			 * USB1 usually takes extra 45 ms, for safety,
+			 * we take 100 ms as timeout.
+			 */
+			temp = ehci_readl(ehci, portsc_reg);
+		} while (!(temp & PORT_PE) && tries--);
+		if (temp & PORT_PE)
+			break;
+	}
+	if (i == 2)
+		retval = -ETIMEDOUT;
+
+	/*
+	 * Clear Connect Status Change bit if it's set.
+	 * We can't clear PORT_PEC. It will also cause PORT_PE to be cleared.
+	 */
+	if (temp & PORT_CSC)
+		ehci_writel(ehci, PORT_CSC, portsc_reg);
+
+	/*
+	 * Write to clear any interrupt status bits that might be set
+	 * during port reset.
+	 */
+	temp = ehci_readl(ehci, &ehci->regs->status);
+	ehci_writel(ehci, temp, &ehci->regs->status);
+
+	/* restore original interrupt-enable bits */
+	spin_lock_irqsave(&ehci->lock, *flags);
+	ehci_writel(ehci, saved_usbintr, &ehci->regs->intr_enable);
+
+	return retval;
+}
+
+static int tegra_ehci_hub_control(struct ci_hdrc *ci, u16 typeReq, u16 wValue,
+				  u16 wIndex, char *buf, u16 wLength,
+				  bool *done, unsigned long *flags)
+{
+	struct tegra_usb *usb = dev_get_drvdata(ci->dev->parent);
+	struct ehci_hcd *ehci = hcd_to_ehci(ci->hcd);
+	u32 __iomem *status_reg;
+	int retval = 0;
+
+	status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
+
+	switch (typeReq) {
+	case SetPortFeature:
+		if (wValue != USB_PORT_FEAT_RESET || !usb->needs_double_reset)
+			break;
+
+		/* for USB1 port we need to issue Port Reset twice internally */
+		retval = tegra_usb_internal_port_reset(ehci, status_reg, flags);
+		*done  = true;
+		break;
+	}
+
+	return retval;
+}
+
+static void tegra_usb_enter_lpm(struct ci_hdrc *ci, bool enable)
+{
+	/*
+	 * Touching any register which belongs to AHB clock domain will
+	 * hang CPU if USB controller is put into low power mode because
+	 * AHB USB clock is gated on Tegra in the LPM.
+	 *
+	 * Tegra PHY has a separate register for checking the clock status
+	 * and usb_phy_set_suspend() takes care of gating/ungating the clocks
+	 * and restoring the PHY state on Tegra. Hence DEVLC/PORTSC registers
+	 * shouldn't be touched directly by the CI driver.
+	 */
+	usb_phy_set_suspend(ci->usb_phy, enable);
+}
+
+static int tegra_usb_probe(struct platform_device *pdev)
+{
+	const struct tegra_usb_soc_info *soc;
+	struct tegra_usb *usb;
+	int err;
+
+	usb = devm_kzalloc(&pdev->dev, sizeof(*usb), GFP_KERNEL);
+	if (!usb)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, usb);
+
+	soc = of_device_get_match_data(&pdev->dev);
+	if (!soc) {
+		dev_err(&pdev->dev, "failed to match OF data\n");
+		return -EINVAL;
+	}
+
+	usb->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0);
+	if (IS_ERR(usb->phy))
+		return dev_err_probe(&pdev->dev, PTR_ERR(usb->phy),
+				     "failed to get PHY\n");
+
+	usb->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(usb->clk)) {
+		err = PTR_ERR(usb->clk);
+		dev_err(&pdev->dev, "failed to get clock: %d\n", err);
+		return err;
+	}
+
+	err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev);
+	if (err)
+		return err;
+
+	pm_runtime_enable(&pdev->dev);
+	err = pm_runtime_resume_and_get(&pdev->dev);
+	if (err)
+		return err;
+
+	if (device_property_present(&pdev->dev, "nvidia,needs-double-reset"))
+		usb->needs_double_reset = true;
+
+	err = tegra_usb_reset_controller(&pdev->dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to reset controller: %d\n", err);
+		goto fail_power_off;
+	}
+
+	/*
+	 * USB controller registers shouldn't be touched before PHY is
+	 * initialized, otherwise CPU will hang because clocks are gated.
+	 * PHY driver controls gating of internal USB clocks on Tegra.
+	 */
+	err = usb_phy_init(usb->phy);
+	if (err)
+		goto fail_power_off;
+
+	/* setup and register ChipIdea HDRC device */
+	usb->soc = soc;
+	usb->data.name = "tegra-usb";
+	usb->data.flags = soc->flags;
+	usb->data.usb_phy = usb->phy;
+	usb->data.dr_mode = soc->dr_mode;
+	usb->data.capoffset = DEF_CAPOFFSET;
+	usb->data.enter_lpm = tegra_usb_enter_lpm;
+	usb->data.hub_control = tegra_ehci_hub_control;
+	usb->data.notify_event = tegra_usb_notify_event;
+
+	/* Tegra PHY driver currently doesn't support LPM for ULPI */
+	if (of_usb_get_phy_mode(pdev->dev.of_node) == USBPHY_INTERFACE_MODE_ULPI)
+		usb->data.flags &= ~CI_HDRC_SUPPORTS_RUNTIME_PM;
+
+	usb->dev = ci_hdrc_add_device(&pdev->dev, pdev->resource,
+				      pdev->num_resources, &usb->data);
+	if (IS_ERR(usb->dev)) {
+		err = PTR_ERR(usb->dev);
+		dev_err(&pdev->dev, "failed to add HDRC device: %d\n", err);
+		goto phy_shutdown;
+	}
+
+	return 0;
+
+phy_shutdown:
+	usb_phy_shutdown(usb->phy);
+fail_power_off:
+	pm_runtime_put_sync_suspend(&pdev->dev);
+	pm_runtime_force_suspend(&pdev->dev);
+
+	return err;
+}
+
+static int tegra_usb_remove(struct platform_device *pdev)
+{
+	struct tegra_usb *usb = platform_get_drvdata(pdev);
+
+	ci_hdrc_remove_device(usb->dev);
+	usb_phy_shutdown(usb->phy);
+
+	pm_runtime_put_sync_suspend(&pdev->dev);
+	pm_runtime_force_suspend(&pdev->dev);
+
+	return 0;
+}
+
+static int __maybe_unused tegra_usb_runtime_resume(struct device *dev)
+{
+	struct tegra_usb *usb = dev_get_drvdata(dev);
+	int err;
+
+	err = clk_prepare_enable(usb->clk);
+	if (err < 0) {
+		dev_err(dev, "failed to enable clock: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused tegra_usb_runtime_suspend(struct device *dev)
+{
+	struct tegra_usb *usb = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(usb->clk);
+
+	return 0;
+}
+
+static const struct dev_pm_ops tegra_usb_pm = {
+	SET_RUNTIME_PM_OPS(tegra_usb_runtime_suspend, tegra_usb_runtime_resume,
+			   NULL)
+};
+
+static struct platform_driver tegra_usb_driver = {
+	.driver = {
+		.name = "tegra-usb",
+		.of_match_table = tegra_usb_of_match,
+		.pm = &tegra_usb_pm,
+	},
+	.probe = tegra_usb_probe,
+	.remove = tegra_usb_remove,
+};
+module_platform_driver(tegra_usb_driver);
+
+MODULE_DESCRIPTION("NVIDIA Tegra USB driver");
+MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
new file mode 100644
index 000000000..dc86b1206
--- /dev/null
+++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014 Marvell Technology Group Ltd.
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/usb/chipidea.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/ulpi.h>
+
+#include "ci.h"
+
+struct ci_hdrc_usb2_priv {
+	struct platform_device	*ci_pdev;
+	struct clk		*clk;
+};
+
+static const struct ci_hdrc_platform_data ci_default_pdata = {
+	.capoffset	= DEF_CAPOFFSET,
+	.flags		= CI_HDRC_DISABLE_STREAMING,
+};
+
+static const struct ci_hdrc_platform_data ci_zynq_pdata = {
+	.capoffset	= DEF_CAPOFFSET,
+	.flags          = CI_HDRC_PHY_VBUS_CONTROL,
+};
+
+static const struct ci_hdrc_platform_data ci_zevio_pdata = {
+	.capoffset	= DEF_CAPOFFSET,
+	.flags		= CI_HDRC_REGS_SHARED | CI_HDRC_FORCE_FULLSPEED,
+};
+
+static const struct of_device_id ci_hdrc_usb2_of_match[] = {
+	{ .compatible = "chipidea,usb2" },
+	{ .compatible = "xlnx,zynq-usb-2.20a", .data = &ci_zynq_pdata },
+	{ .compatible = "lsi,zevio-usb", .data = &ci_zevio_pdata },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
+
+static int ci_hdrc_usb2_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ci_hdrc_usb2_priv *priv;
+	struct ci_hdrc_platform_data *ci_pdata = dev_get_platdata(dev);
+	int ret;
+	const struct of_device_id *match;
+
+	if (!ci_pdata) {
+		ci_pdata = devm_kmalloc(dev, sizeof(*ci_pdata), GFP_KERNEL);
+		if (!ci_pdata)
+			return -ENOMEM;
+		*ci_pdata = ci_default_pdata;	/* struct copy */
+	}
+
+	match = of_match_device(ci_hdrc_usb2_of_match, &pdev->dev);
+	if (match && match->data) {
+		/* struct copy */
+		*ci_pdata = *(struct ci_hdrc_platform_data *)match->data;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->clk = devm_clk_get_optional(dev, NULL);
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable the clock: %d\n", ret);
+		return ret;
+	}
+
+	ci_pdata->name = dev_name(dev);
+
+	priv->ci_pdev = ci_hdrc_add_device(dev, pdev->resource,
+					   pdev->num_resources, ci_pdata);
+	if (IS_ERR(priv->ci_pdev)) {
+		ret = PTR_ERR(priv->ci_pdev);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev,
+				"failed to register ci_hdrc platform device: %d\n",
+				ret);
+		goto clk_err;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	pm_runtime_no_callbacks(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+
+clk_err:
+	clk_disable_unprepare(priv->clk);
+	return ret;
+}
+
+static int ci_hdrc_usb2_remove(struct platform_device *pdev)
+{
+	struct ci_hdrc_usb2_priv *priv = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(&pdev->dev);
+	ci_hdrc_remove_device(priv->ci_pdev);
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static struct platform_driver ci_hdrc_usb2_driver = {
+	.probe	= ci_hdrc_usb2_probe,
+	.remove	= ci_hdrc_usb2_remove,
+	.driver	= {
+		.name		= "chipidea-usb2",
+		.of_match_table	= of_match_ptr(ci_hdrc_usb2_of_match),
+	},
+};
+module_platform_driver(ci_hdrc_usb2_driver);
+
+MODULE_DESCRIPTION("ChipIdea HDRC USB2 binding for ci13xxx");
+MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
new file mode 100644
index 000000000..763d6858a
--- /dev/null
+++ b/drivers/usb/chipidea/core.c
@@ -0,0 +1,1486 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * core.c - ChipIdea USB IP core family device controller
+ *
+ * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2020 NXP
+ *
+ * Author: David Lopo
+ *	   Peter Chen <peter.chen@nxp.com>
+ *
+ * Main Features:
+ * - Four transfers are supported, usbtest is passed
+ * - USB Certification for gadget: CH9 and Mass Storage are passed
+ * - Low power mode
+ * - USB wakeup
+ */
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/extcon.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/idr.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/chipidea.h>
+#include <linux/usb/of.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/ehci_def.h>
+
+#include "ci.h"
+#include "udc.h"
+#include "bits.h"
+#include "host.h"
+#include "otg.h"
+#include "otg_fsm.h"
+
+/* Controller register map */
+static const u8 ci_regs_nolpm[] = {
+	[CAP_CAPLENGTH]		= 0x00U,
+	[CAP_HCCPARAMS]		= 0x08U,
+	[CAP_DCCPARAMS]		= 0x24U,
+	[CAP_TESTMODE]		= 0x38U,
+	[OP_USBCMD]		= 0x00U,
+	[OP_USBSTS]		= 0x04U,
+	[OP_USBINTR]		= 0x08U,
+	[OP_FRINDEX]		= 0x0CU,
+	[OP_DEVICEADDR]		= 0x14U,
+	[OP_ENDPTLISTADDR]	= 0x18U,
+	[OP_TTCTRL]		= 0x1CU,
+	[OP_BURSTSIZE]		= 0x20U,
+	[OP_ULPI_VIEWPORT]	= 0x30U,
+	[OP_PORTSC]		= 0x44U,
+	[OP_DEVLC]		= 0x84U,
+	[OP_OTGSC]		= 0x64U,
+	[OP_USBMODE]		= 0x68U,
+	[OP_ENDPTSETUPSTAT]	= 0x6CU,
+	[OP_ENDPTPRIME]		= 0x70U,
+	[OP_ENDPTFLUSH]		= 0x74U,
+	[OP_ENDPTSTAT]		= 0x78U,
+	[OP_ENDPTCOMPLETE]	= 0x7CU,
+	[OP_ENDPTCTRL]		= 0x80U,
+};
+
+static const u8 ci_regs_lpm[] = {
+	[CAP_CAPLENGTH]		= 0x00U,
+	[CAP_HCCPARAMS]		= 0x08U,
+	[CAP_DCCPARAMS]		= 0x24U,
+	[CAP_TESTMODE]		= 0xFCU,
+	[OP_USBCMD]		= 0x00U,
+	[OP_USBSTS]		= 0x04U,
+	[OP_USBINTR]		= 0x08U,
+	[OP_FRINDEX]		= 0x0CU,
+	[OP_DEVICEADDR]		= 0x14U,
+	[OP_ENDPTLISTADDR]	= 0x18U,
+	[OP_TTCTRL]		= 0x1CU,
+	[OP_BURSTSIZE]		= 0x20U,
+	[OP_ULPI_VIEWPORT]	= 0x30U,
+	[OP_PORTSC]		= 0x44U,
+	[OP_DEVLC]		= 0x84U,
+	[OP_OTGSC]		= 0xC4U,
+	[OP_USBMODE]		= 0xC8U,
+	[OP_ENDPTSETUPSTAT]	= 0xD8U,
+	[OP_ENDPTPRIME]		= 0xDCU,
+	[OP_ENDPTFLUSH]		= 0xE0U,
+	[OP_ENDPTSTAT]		= 0xE4U,
+	[OP_ENDPTCOMPLETE]	= 0xE8U,
+	[OP_ENDPTCTRL]		= 0xECU,
+};
+
+static void hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm)
+{
+	int i;
+
+	for (i = 0; i < OP_ENDPTCTRL; i++)
+		ci->hw_bank.regmap[i] =
+			(i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) +
+			(is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]);
+
+	for (; i <= OP_LAST; i++)
+		ci->hw_bank.regmap[i] = ci->hw_bank.op +
+			4 * (i - OP_ENDPTCTRL) +
+			(is_lpm
+			 ? ci_regs_lpm[OP_ENDPTCTRL]
+			 : ci_regs_nolpm[OP_ENDPTCTRL]);
+
+}
+
+static enum ci_revision ci_get_revision(struct ci_hdrc *ci)
+{
+	int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION);
+	enum ci_revision rev = CI_REVISION_UNKNOWN;
+
+	if (ver == 0x2) {
+		rev = hw_read_id_reg(ci, ID_ID, REVISION)
+			>> __ffs(REVISION);
+		rev += CI_REVISION_20;
+	} else if (ver == 0x0) {
+		rev = CI_REVISION_1X;
+	}
+
+	return rev;
+}
+
+/**
+ * hw_read_intr_enable: returns interrupt enable register
+ *
+ * @ci: the controller
+ *
+ * This function returns register data
+ */
+u32 hw_read_intr_enable(struct ci_hdrc *ci)
+{
+	return hw_read(ci, OP_USBINTR, ~0);
+}
+
+/**
+ * hw_read_intr_status: returns interrupt status register
+ *
+ * @ci: the controller
+ *
+ * This function returns register data
+ */
+u32 hw_read_intr_status(struct ci_hdrc *ci)
+{
+	return hw_read(ci, OP_USBSTS, ~0);
+}
+
+/**
+ * hw_port_test_set: writes port test mode (execute without interruption)
+ * @ci: the controller
+ * @mode: new value
+ *
+ * This function returns an error code
+ */
+int hw_port_test_set(struct ci_hdrc *ci, u8 mode)
+{
+	const u8 TEST_MODE_MAX = 7;
+
+	if (mode > TEST_MODE_MAX)
+		return -EINVAL;
+
+	hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC));
+	return 0;
+}
+
+/**
+ * hw_port_test_get: reads port test mode value
+ *
+ * @ci: the controller
+ *
+ * This function returns port test mode value
+ */
+u8 hw_port_test_get(struct ci_hdrc *ci)
+{
+	return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC);
+}
+
+static void hw_wait_phy_stable(void)
+{
+	/*
+	 * The phy needs some delay to output the stable status from low
+	 * power mode. And for OTGSC, the status inputs are debounced
+	 * using a 1 ms time constant, so, delay 2ms for controller to get
+	 * the stable status, like vbus and id when the phy leaves low power.
+	 */
+	usleep_range(2000, 2500);
+}
+
+/* The PHY enters/leaves low power mode */
+static void ci_hdrc_enter_lpm_common(struct ci_hdrc *ci, bool enable)
+{
+	enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC;
+	bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm)));
+
+	if (enable && !lpm)
+		hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
+				PORTSC_PHCD(ci->hw_bank.lpm));
+	else if (!enable && lpm)
+		hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
+				0);
+}
+
+static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable)
+{
+	return ci->platdata->enter_lpm(ci, enable);
+}
+
+static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
+{
+	u32 reg;
+
+	/* bank is a module variable */
+	ci->hw_bank.abs = base;
+
+	ci->hw_bank.cap = ci->hw_bank.abs;
+	ci->hw_bank.cap += ci->platdata->capoffset;
+	ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff);
+
+	hw_alloc_regmap(ci, false);
+	reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >>
+		__ffs(HCCPARAMS_LEN);
+	ci->hw_bank.lpm  = reg;
+	if (reg)
+		hw_alloc_regmap(ci, !!reg);
+	ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs;
+	ci->hw_bank.size += OP_LAST;
+	ci->hw_bank.size /= sizeof(u32);
+
+	reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >>
+		__ffs(DCCPARAMS_DEN);
+	ci->hw_ep_max = reg * 2;   /* cache hw ENDPT_MAX */
+
+	if (ci->hw_ep_max > ENDPT_MAX)
+		return -ENODEV;
+
+	ci_hdrc_enter_lpm(ci, false);
+
+	/* Disable all interrupts bits */
+	hw_write(ci, OP_USBINTR, 0xffffffff, 0);
+
+	/* Clear all interrupts status bits*/
+	hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
+
+	ci->rev = ci_get_revision(ci);
+
+	dev_dbg(ci->dev,
+		"revision: %d, lpm: %d; cap: %px op: %px\n",
+		ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
+
+	/* setup lock mode ? */
+
+	/* ENDPTSETUPSTAT is '0' by default */
+
+	/* HCSPARAMS.bf.ppc SHOULD BE zero for device */
+
+	return 0;
+}
+
+void hw_phymode_configure(struct ci_hdrc *ci)
+{
+	u32 portsc, lpm, sts = 0;
+
+	switch (ci->platdata->phy_mode) {
+	case USBPHY_INTERFACE_MODE_UTMI:
+		portsc = PORTSC_PTS(PTS_UTMI);
+		lpm = DEVLC_PTS(PTS_UTMI);
+		break;
+	case USBPHY_INTERFACE_MODE_UTMIW:
+		portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
+		lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
+		break;
+	case USBPHY_INTERFACE_MODE_ULPI:
+		portsc = PORTSC_PTS(PTS_ULPI);
+		lpm = DEVLC_PTS(PTS_ULPI);
+		break;
+	case USBPHY_INTERFACE_MODE_SERIAL:
+		portsc = PORTSC_PTS(PTS_SERIAL);
+		lpm = DEVLC_PTS(PTS_SERIAL);
+		sts = 1;
+		break;
+	case USBPHY_INTERFACE_MODE_HSIC:
+		portsc = PORTSC_PTS(PTS_HSIC);
+		lpm = DEVLC_PTS(PTS_HSIC);
+		break;
+	default:
+		return;
+	}
+
+	if (ci->hw_bank.lpm) {
+		hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
+		if (sts)
+			hw_write(ci, OP_DEVLC, DEVLC_STS, DEVLC_STS);
+	} else {
+		hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
+		if (sts)
+			hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS);
+	}
+}
+EXPORT_SYMBOL_GPL(hw_phymode_configure);
+
+/**
+ * _ci_usb_phy_init: initialize phy taking in account both phy and usb_phy
+ * interfaces
+ * @ci: the controller
+ *
+ * This function returns an error code if the phy failed to init
+ */
+static int _ci_usb_phy_init(struct ci_hdrc *ci)
+{
+	int ret;
+
+	if (ci->phy) {
+		ret = phy_init(ci->phy);
+		if (ret)
+			return ret;
+
+		ret = phy_power_on(ci->phy);
+		if (ret) {
+			phy_exit(ci->phy);
+			return ret;
+		}
+	} else {
+		ret = usb_phy_init(ci->usb_phy);
+	}
+
+	return ret;
+}
+
+/**
+ * ci_usb_phy_exit: deinitialize phy taking in account both phy and usb_phy
+ * interfaces
+ * @ci: the controller
+ */
+static void ci_usb_phy_exit(struct ci_hdrc *ci)
+{
+	if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
+		return;
+
+	if (ci->phy) {
+		phy_power_off(ci->phy);
+		phy_exit(ci->phy);
+	} else {
+		usb_phy_shutdown(ci->usb_phy);
+	}
+}
+
+/**
+ * ci_usb_phy_init: initialize phy according to different phy type
+ * @ci: the controller
+ *
+ * This function returns an error code if usb_phy_init has failed
+ */
+static int ci_usb_phy_init(struct ci_hdrc *ci)
+{
+	int ret;
+
+	if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
+		return 0;
+
+	switch (ci->platdata->phy_mode) {
+	case USBPHY_INTERFACE_MODE_UTMI:
+	case USBPHY_INTERFACE_MODE_UTMIW:
+	case USBPHY_INTERFACE_MODE_HSIC:
+		ret = _ci_usb_phy_init(ci);
+		if (!ret)
+			hw_wait_phy_stable();
+		else
+			return ret;
+		hw_phymode_configure(ci);
+		break;
+	case USBPHY_INTERFACE_MODE_ULPI:
+	case USBPHY_INTERFACE_MODE_SERIAL:
+		hw_phymode_configure(ci);
+		ret = _ci_usb_phy_init(ci);
+		if (ret)
+			return ret;
+		break;
+	default:
+		ret = _ci_usb_phy_init(ci);
+		if (!ret)
+			hw_wait_phy_stable();
+	}
+
+	return ret;
+}
+
+
+/**
+ * ci_platform_configure: do controller configure
+ * @ci: the controller
+ *
+ */
+void ci_platform_configure(struct ci_hdrc *ci)
+{
+	bool is_device_mode, is_host_mode;
+
+	is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC;
+	is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC;
+
+	if (is_device_mode) {
+		phy_set_mode(ci->phy, PHY_MODE_USB_DEVICE);
+
+		if (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING)
+			hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS,
+				 USBMODE_CI_SDIS);
+	}
+
+	if (is_host_mode) {
+		phy_set_mode(ci->phy, PHY_MODE_USB_HOST);
+
+		if (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING)
+			hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS,
+				 USBMODE_CI_SDIS);
+	}
+
+	if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) {
+		if (ci->hw_bank.lpm)
+			hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC);
+		else
+			hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
+	}
+
+	if (ci->platdata->flags & CI_HDRC_SET_NON_ZERO_TTHA)
+		hw_write(ci, OP_TTCTRL, TTCTRL_TTHA_MASK, TTCTRL_TTHA);
+
+	hw_write(ci, OP_USBCMD, 0xff0000, ci->platdata->itc_setting << 16);
+
+	if (ci->platdata->flags & CI_HDRC_OVERRIDE_AHB_BURST)
+		hw_write_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK,
+			ci->platdata->ahb_burst_config);
+
+	/* override burst size, take effect only when ahb_burst_config is 0 */
+	if (!hw_read_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK)) {
+		if (ci->platdata->flags & CI_HDRC_OVERRIDE_TX_BURST)
+			hw_write(ci, OP_BURSTSIZE, TX_BURST_MASK,
+			ci->platdata->tx_burst_size << __ffs(TX_BURST_MASK));
+
+		if (ci->platdata->flags & CI_HDRC_OVERRIDE_RX_BURST)
+			hw_write(ci, OP_BURSTSIZE, RX_BURST_MASK,
+				ci->platdata->rx_burst_size);
+	}
+}
+
+/**
+ * hw_controller_reset: do controller reset
+ * @ci: the controller
+  *
+ * This function returns an error code
+ */
+static int hw_controller_reset(struct ci_hdrc *ci)
+{
+	int count = 0;
+
+	hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST);
+	while (hw_read(ci, OP_USBCMD, USBCMD_RST)) {
+		udelay(10);
+		if (count++ > 1000)
+			return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+/**
+ * hw_device_reset: resets chip (execute without interruption)
+ * @ci: the controller
+ *
+ * This function returns an error code
+ */
+int hw_device_reset(struct ci_hdrc *ci)
+{
+	int ret;
+
+	/* should flush & stop before reset */
+	hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
+	hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+
+	ret = hw_controller_reset(ci);
+	if (ret) {
+		dev_err(ci->dev, "error resetting controller, ret=%d\n", ret);
+		return ret;
+	}
+
+	if (ci->platdata->notify_event) {
+		ret = ci->platdata->notify_event(ci,
+			CI_HDRC_CONTROLLER_RESET_EVENT);
+		if (ret)
+			return ret;
+	}
+
+	/* USBMODE should be configured step by step */
+	hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
+	hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_DC);
+	/* HW >= 2.3 */
+	hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM);
+
+	if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) {
+		dev_err(ci->dev, "cannot enter in %s device mode\n",
+			ci_role(ci)->name);
+		dev_err(ci->dev, "lpm = %i\n", ci->hw_bank.lpm);
+		return -ENODEV;
+	}
+
+	ci_platform_configure(ci);
+
+	return 0;
+}
+
+static irqreturn_t ci_irq_handler(int irq, void *data)
+{
+	struct ci_hdrc *ci = data;
+	irqreturn_t ret = IRQ_NONE;
+	u32 otgsc = 0;
+
+	if (ci->in_lpm) {
+		/*
+		 * If we already have a wakeup irq pending there,
+		 * let's just return to wait resume finished firstly.
+		 */
+		if (ci->wakeup_int)
+			return IRQ_HANDLED;
+
+		disable_irq_nosync(irq);
+		ci->wakeup_int = true;
+		pm_runtime_get(ci->dev);
+		return IRQ_HANDLED;
+	}
+
+	if (ci->is_otg) {
+		otgsc = hw_read_otgsc(ci, ~0);
+		if (ci_otg_is_fsm_mode(ci)) {
+			ret = ci_otg_fsm_irq(ci);
+			if (ret == IRQ_HANDLED)
+				return ret;
+		}
+	}
+
+	/*
+	 * Handle id change interrupt, it indicates device/host function
+	 * switch.
+	 */
+	if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) {
+		ci->id_event = true;
+		/* Clear ID change irq status */
+		hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS);
+		ci_otg_queue_work(ci);
+		return IRQ_HANDLED;
+	}
+
+	/*
+	 * Handle vbus change interrupt, it indicates device connection
+	 * and disconnection events.
+	 */
+	if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) {
+		ci->b_sess_valid_event = true;
+		/* Clear BSV irq */
+		hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS);
+		ci_otg_queue_work(ci);
+		return IRQ_HANDLED;
+	}
+
+	/* Handle device/host interrupt */
+	if (ci->role != CI_ROLE_END)
+		ret = ci_role(ci)->irq(ci);
+
+	return ret;
+}
+
+static void ci_irq(struct ci_hdrc *ci)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ci_irq_handler(ci->irq, ci);
+	local_irq_restore(flags);
+}
+
+static int ci_cable_notifier(struct notifier_block *nb, unsigned long event,
+			     void *ptr)
+{
+	struct ci_hdrc_cable *cbl = container_of(nb, struct ci_hdrc_cable, nb);
+	struct ci_hdrc *ci = cbl->ci;
+
+	cbl->connected = event;
+	cbl->changed = true;
+
+	ci_irq(ci);
+	return NOTIFY_DONE;
+}
+
+static enum usb_role ci_usb_role_switch_get(struct usb_role_switch *sw)
+{
+	struct ci_hdrc *ci = usb_role_switch_get_drvdata(sw);
+	enum usb_role role;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ci->lock, flags);
+	role = ci_role_to_usb_role(ci);
+	spin_unlock_irqrestore(&ci->lock, flags);
+
+	return role;
+}
+
+static int ci_usb_role_switch_set(struct usb_role_switch *sw,
+				  enum usb_role role)
+{
+	struct ci_hdrc *ci = usb_role_switch_get_drvdata(sw);
+	struct ci_hdrc_cable *cable = NULL;
+	enum usb_role current_role = ci_role_to_usb_role(ci);
+	enum ci_role ci_role = usb_role_to_ci_role(role);
+	unsigned long flags;
+
+	if ((ci_role != CI_ROLE_END && !ci->roles[ci_role]) ||
+	    (current_role == role))
+		return 0;
+
+	pm_runtime_get_sync(ci->dev);
+	/* Stop current role */
+	spin_lock_irqsave(&ci->lock, flags);
+	if (current_role == USB_ROLE_DEVICE)
+		cable = &ci->platdata->vbus_extcon;
+	else if (current_role == USB_ROLE_HOST)
+		cable = &ci->platdata->id_extcon;
+
+	if (cable) {
+		cable->changed = true;
+		cable->connected = false;
+		ci_irq(ci);
+		spin_unlock_irqrestore(&ci->lock, flags);
+		if (ci->wq && role != USB_ROLE_NONE)
+			flush_workqueue(ci->wq);
+		spin_lock_irqsave(&ci->lock, flags);
+	}
+
+	cable = NULL;
+
+	/* Start target role */
+	if (role == USB_ROLE_DEVICE)
+		cable = &ci->platdata->vbus_extcon;
+	else if (role == USB_ROLE_HOST)
+		cable = &ci->platdata->id_extcon;
+
+	if (cable) {
+		cable->changed = true;
+		cable->connected = true;
+		ci_irq(ci);
+	}
+	spin_unlock_irqrestore(&ci->lock, flags);
+	pm_runtime_put_sync(ci->dev);
+
+	return 0;
+}
+
+static struct usb_role_switch_desc ci_role_switch = {
+	.set = ci_usb_role_switch_set,
+	.get = ci_usb_role_switch_get,
+	.allow_userspace_control = true,
+};
+
+static int ci_get_platdata(struct device *dev,
+		struct ci_hdrc_platform_data *platdata)
+{
+	struct extcon_dev *ext_vbus, *ext_id;
+	struct ci_hdrc_cable *cable;
+	int ret;
+
+	if (!platdata->phy_mode)
+		platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
+
+	if (!platdata->dr_mode)
+		platdata->dr_mode = usb_get_dr_mode(dev);
+
+	if (platdata->dr_mode == USB_DR_MODE_UNKNOWN)
+		platdata->dr_mode = USB_DR_MODE_OTG;
+
+	if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) {
+		/* Get the vbus regulator */
+		platdata->reg_vbus = devm_regulator_get_optional(dev, "vbus");
+		if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
+			return -EPROBE_DEFER;
+		} else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
+			/* no vbus regulator is needed */
+			platdata->reg_vbus = NULL;
+		} else if (IS_ERR(platdata->reg_vbus)) {
+			dev_err(dev, "Getting regulator error: %ld\n",
+				PTR_ERR(platdata->reg_vbus));
+			return PTR_ERR(platdata->reg_vbus);
+		}
+		/* Get TPL support */
+		if (!platdata->tpl_support)
+			platdata->tpl_support =
+				of_usb_host_tpl_support(dev->of_node);
+	}
+
+	if (platdata->dr_mode == USB_DR_MODE_OTG) {
+		/* We can support HNP and SRP of OTG 2.0 */
+		platdata->ci_otg_caps.otg_rev = 0x0200;
+		platdata->ci_otg_caps.hnp_support = true;
+		platdata->ci_otg_caps.srp_support = true;
+
+		/* Update otg capabilities by DT properties */
+		ret = of_usb_update_otg_caps(dev->of_node,
+					&platdata->ci_otg_caps);
+		if (ret)
+			return ret;
+	}
+
+	if (usb_get_maximum_speed(dev) == USB_SPEED_FULL)
+		platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
+
+	of_property_read_u32(dev->of_node, "phy-clkgate-delay-us",
+				     &platdata->phy_clkgate_delay_us);
+
+	platdata->itc_setting = 1;
+
+	of_property_read_u32(dev->of_node, "itc-setting",
+					&platdata->itc_setting);
+
+	ret = of_property_read_u32(dev->of_node, "ahb-burst-config",
+				&platdata->ahb_burst_config);
+	if (!ret) {
+		platdata->flags |= CI_HDRC_OVERRIDE_AHB_BURST;
+	} else if (ret != -EINVAL) {
+		dev_err(dev, "failed to get ahb-burst-config\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(dev->of_node, "tx-burst-size-dword",
+				&platdata->tx_burst_size);
+	if (!ret) {
+		platdata->flags |= CI_HDRC_OVERRIDE_TX_BURST;
+	} else if (ret != -EINVAL) {
+		dev_err(dev, "failed to get tx-burst-size-dword\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(dev->of_node, "rx-burst-size-dword",
+				&platdata->rx_burst_size);
+	if (!ret) {
+		platdata->flags |= CI_HDRC_OVERRIDE_RX_BURST;
+	} else if (ret != -EINVAL) {
+		dev_err(dev, "failed to get rx-burst-size-dword\n");
+		return ret;
+	}
+
+	if (of_find_property(dev->of_node, "non-zero-ttctrl-ttha", NULL))
+		platdata->flags |= CI_HDRC_SET_NON_ZERO_TTHA;
+
+	ext_id = ERR_PTR(-ENODEV);
+	ext_vbus = ERR_PTR(-ENODEV);
+	if (of_property_read_bool(dev->of_node, "extcon")) {
+		/* Each one of them is not mandatory */
+		ext_vbus = extcon_get_edev_by_phandle(dev, 0);
+		if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV)
+			return PTR_ERR(ext_vbus);
+
+		ext_id = extcon_get_edev_by_phandle(dev, 1);
+		if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV)
+			return PTR_ERR(ext_id);
+	}
+
+	cable = &platdata->vbus_extcon;
+	cable->nb.notifier_call = ci_cable_notifier;
+	cable->edev = ext_vbus;
+
+	if (!IS_ERR(ext_vbus)) {
+		ret = extcon_get_state(cable->edev, EXTCON_USB);
+		if (ret)
+			cable->connected = true;
+		else
+			cable->connected = false;
+	}
+
+	cable = &platdata->id_extcon;
+	cable->nb.notifier_call = ci_cable_notifier;
+	cable->edev = ext_id;
+
+	if (!IS_ERR(ext_id)) {
+		ret = extcon_get_state(cable->edev, EXTCON_USB_HOST);
+		if (ret)
+			cable->connected = true;
+		else
+			cable->connected = false;
+	}
+
+	if (device_property_read_bool(dev, "usb-role-switch"))
+		ci_role_switch.fwnode = dev->fwnode;
+
+	platdata->pctl = devm_pinctrl_get(dev);
+	if (!IS_ERR(platdata->pctl)) {
+		struct pinctrl_state *p;
+
+		p = pinctrl_lookup_state(platdata->pctl, "default");
+		if (!IS_ERR(p))
+			platdata->pins_default = p;
+
+		p = pinctrl_lookup_state(platdata->pctl, "host");
+		if (!IS_ERR(p))
+			platdata->pins_host = p;
+
+		p = pinctrl_lookup_state(platdata->pctl, "device");
+		if (!IS_ERR(p))
+			platdata->pins_device = p;
+	}
+
+	if (!platdata->enter_lpm)
+		platdata->enter_lpm = ci_hdrc_enter_lpm_common;
+
+	return 0;
+}
+
+static int ci_extcon_register(struct ci_hdrc *ci)
+{
+	struct ci_hdrc_cable *id, *vbus;
+	int ret;
+
+	id = &ci->platdata->id_extcon;
+	id->ci = ci;
+	if (!IS_ERR_OR_NULL(id->edev)) {
+		ret = devm_extcon_register_notifier(ci->dev, id->edev,
+						EXTCON_USB_HOST, &id->nb);
+		if (ret < 0) {
+			dev_err(ci->dev, "register ID failed\n");
+			return ret;
+		}
+	}
+
+	vbus = &ci->platdata->vbus_extcon;
+	vbus->ci = ci;
+	if (!IS_ERR_OR_NULL(vbus->edev)) {
+		ret = devm_extcon_register_notifier(ci->dev, vbus->edev,
+						EXTCON_USB, &vbus->nb);
+		if (ret < 0) {
+			dev_err(ci->dev, "register VBUS failed\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static DEFINE_IDA(ci_ida);
+
+struct platform_device *ci_hdrc_add_device(struct device *dev,
+			struct resource *res, int nres,
+			struct ci_hdrc_platform_data *platdata)
+{
+	struct platform_device *pdev;
+	int id, ret;
+
+	ret = ci_get_platdata(dev, platdata);
+	if (ret)
+		return ERR_PTR(ret);
+
+	id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL);
+	if (id < 0)
+		return ERR_PTR(id);
+
+	pdev = platform_device_alloc("ci_hdrc", id);
+	if (!pdev) {
+		ret = -ENOMEM;
+		goto put_id;
+	}
+
+	pdev->dev.parent = dev;
+	device_set_of_node_from_dev(&pdev->dev, dev);
+
+	ret = platform_device_add_resources(pdev, res, nres);
+	if (ret)
+		goto err;
+
+	ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
+	if (ret)
+		goto err;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+		goto err;
+
+	return pdev;
+
+err:
+	platform_device_put(pdev);
+put_id:
+	ida_simple_remove(&ci_ida, id);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(ci_hdrc_add_device);
+
+void ci_hdrc_remove_device(struct platform_device *pdev)
+{
+	int id = pdev->id;
+	platform_device_unregister(pdev);
+	ida_simple_remove(&ci_ida, id);
+}
+EXPORT_SYMBOL_GPL(ci_hdrc_remove_device);
+
+/**
+ * ci_hdrc_query_available_role: get runtime available operation mode
+ *
+ * The glue layer can get current operation mode (host/peripheral/otg)
+ * This function should be called after ci core device has created.
+ *
+ * @pdev: the platform device of ci core.
+ *
+ * Return runtime usb_dr_mode.
+ */
+enum usb_dr_mode ci_hdrc_query_available_role(struct platform_device *pdev)
+{
+	struct ci_hdrc *ci = platform_get_drvdata(pdev);
+
+	if (!ci)
+		return USB_DR_MODE_UNKNOWN;
+	if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET])
+		return USB_DR_MODE_OTG;
+	else if (ci->roles[CI_ROLE_HOST])
+		return USB_DR_MODE_HOST;
+	else if (ci->roles[CI_ROLE_GADGET])
+		return USB_DR_MODE_PERIPHERAL;
+	else
+		return USB_DR_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(ci_hdrc_query_available_role);
+
+static inline void ci_role_destroy(struct ci_hdrc *ci)
+{
+	ci_hdrc_gadget_destroy(ci);
+	ci_hdrc_host_destroy(ci);
+	if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
+		ci_hdrc_otg_destroy(ci);
+}
+
+static void ci_get_otg_capable(struct ci_hdrc *ci)
+{
+	if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG)
+		ci->is_otg = false;
+	else
+		ci->is_otg = (hw_read(ci, CAP_DCCPARAMS,
+				DCCPARAMS_DC | DCCPARAMS_HC)
+					== (DCCPARAMS_DC | DCCPARAMS_HC));
+	if (ci->is_otg) {
+		dev_dbg(ci->dev, "It is OTG capable controller\n");
+		/* Disable and clear all OTG irq */
+		hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
+							OTGSC_INT_STATUS_BITS);
+	}
+}
+
+static ssize_t role_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+
+	if (ci->role != CI_ROLE_END)
+		return sprintf(buf, "%s\n", ci_role(ci)->name);
+
+	return 0;
+}
+
+static ssize_t role_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t n)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+	enum ci_role role;
+	int ret;
+
+	if (!(ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET])) {
+		dev_warn(dev, "Current configuration is not dual-role, quit\n");
+		return -EPERM;
+	}
+
+	for (role = CI_ROLE_HOST; role < CI_ROLE_END; role++)
+		if (!strncmp(buf, ci->roles[role]->name,
+			     strlen(ci->roles[role]->name)))
+			break;
+
+	if (role == CI_ROLE_END)
+		return -EINVAL;
+
+	mutex_lock(&ci->mutex);
+
+	if (role == ci->role) {
+		mutex_unlock(&ci->mutex);
+		return n;
+	}
+
+	pm_runtime_get_sync(dev);
+	disable_irq(ci->irq);
+	ci_role_stop(ci);
+	ret = ci_role_start(ci, role);
+	if (!ret && ci->role == CI_ROLE_GADGET)
+		ci_handle_vbus_change(ci);
+	enable_irq(ci->irq);
+	pm_runtime_put_sync(dev);
+	mutex_unlock(&ci->mutex);
+
+	return (ret == 0) ? n : ret;
+}
+static DEVICE_ATTR_RW(role);
+
+static struct attribute *ci_attrs[] = {
+	&dev_attr_role.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(ci);
+
+static int ci_hdrc_probe(struct platform_device *pdev)
+{
+	struct device	*dev = &pdev->dev;
+	struct ci_hdrc	*ci;
+	struct resource	*res;
+	void __iomem	*base;
+	int		ret;
+	enum usb_dr_mode dr_mode;
+
+	if (!dev_get_platdata(dev)) {
+		dev_err(dev, "platform data missing\n");
+		return -ENODEV;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL);
+	if (!ci)
+		return -ENOMEM;
+
+	spin_lock_init(&ci->lock);
+	mutex_init(&ci->mutex);
+	ci->dev = dev;
+	ci->platdata = dev_get_platdata(dev);
+	ci->imx28_write_fix = !!(ci->platdata->flags &
+		CI_HDRC_IMX28_WRITE_FIX);
+	ci->supports_runtime_pm = !!(ci->platdata->flags &
+		CI_HDRC_SUPPORTS_RUNTIME_PM);
+	ci->has_portsc_pec_bug = !!(ci->platdata->flags &
+		CI_HDRC_HAS_PORTSC_PEC_MISSED);
+	platform_set_drvdata(pdev, ci);
+
+	ret = hw_device_init(ci, base);
+	if (ret < 0) {
+		dev_err(dev, "can't initialize hardware\n");
+		return -ENODEV;
+	}
+
+	ret = ci_ulpi_init(ci);
+	if (ret)
+		return ret;
+
+	if (ci->platdata->phy) {
+		ci->phy = ci->platdata->phy;
+	} else if (ci->platdata->usb_phy) {
+		ci->usb_phy = ci->platdata->usb_phy;
+	} else {
+		/* Look for a generic PHY first */
+		ci->phy = devm_phy_get(dev->parent, "usb-phy");
+
+		if (PTR_ERR(ci->phy) == -EPROBE_DEFER) {
+			ret = -EPROBE_DEFER;
+			goto ulpi_exit;
+		} else if (IS_ERR(ci->phy)) {
+			ci->phy = NULL;
+		}
+
+		/* Look for a legacy USB PHY from device-tree next */
+		if (!ci->phy) {
+			ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent,
+								  "phys", 0);
+
+			if (PTR_ERR(ci->usb_phy) == -EPROBE_DEFER) {
+				ret = -EPROBE_DEFER;
+				goto ulpi_exit;
+			} else if (IS_ERR(ci->usb_phy)) {
+				ci->usb_phy = NULL;
+			}
+		}
+
+		/* Look for any registered legacy USB PHY as last resort */
+		if (!ci->phy && !ci->usb_phy) {
+			ci->usb_phy = devm_usb_get_phy(dev->parent,
+						       USB_PHY_TYPE_USB2);
+
+			if (PTR_ERR(ci->usb_phy) == -EPROBE_DEFER) {
+				ret = -EPROBE_DEFER;
+				goto ulpi_exit;
+			} else if (IS_ERR(ci->usb_phy)) {
+				ci->usb_phy = NULL;
+			}
+		}
+
+		/* No USB PHY was found in the end */
+		if (!ci->phy && !ci->usb_phy) {
+			ret = -ENXIO;
+			goto ulpi_exit;
+		}
+	}
+
+	ret = ci_usb_phy_init(ci);
+	if (ret) {
+		dev_err(dev, "unable to init phy: %d\n", ret);
+		goto ulpi_exit;
+	}
+
+	ci->hw_bank.phys = res->start;
+
+	ci->irq = platform_get_irq(pdev, 0);
+	if (ci->irq < 0) {
+		ret = ci->irq;
+		goto deinit_phy;
+	}
+
+	ci_get_otg_capable(ci);
+
+	dr_mode = ci->platdata->dr_mode;
+	/* initialize role(s) before the interrupt is requested */
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
+		ret = ci_hdrc_host_init(ci);
+		if (ret) {
+			if (ret == -ENXIO)
+				dev_info(dev, "doesn't support host\n");
+			else
+				goto deinit_phy;
+		}
+	}
+
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
+		ret = ci_hdrc_gadget_init(ci);
+		if (ret) {
+			if (ret == -ENXIO)
+				dev_info(dev, "doesn't support gadget\n");
+			else
+				goto deinit_host;
+		}
+	}
+
+	if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
+		dev_err(dev, "no supported roles\n");
+		ret = -ENODEV;
+		goto deinit_gadget;
+	}
+
+	if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
+		ret = ci_hdrc_otg_init(ci);
+		if (ret) {
+			dev_err(dev, "init otg fails, ret = %d\n", ret);
+			goto deinit_gadget;
+		}
+	}
+
+	if (ci_role_switch.fwnode) {
+		ci_role_switch.driver_data = ci;
+		ci->role_switch = usb_role_switch_register(dev,
+					&ci_role_switch);
+		if (IS_ERR(ci->role_switch)) {
+			ret = PTR_ERR(ci->role_switch);
+			goto deinit_otg;
+		}
+	}
+
+	if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
+		if (ci->is_otg) {
+			ci->role = ci_otg_role(ci);
+			/* Enable ID change irq */
+			hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE);
+		} else {
+			/*
+			 * If the controller is not OTG capable, but support
+			 * role switch, the defalt role is gadget, and the
+			 * user can switch it through debugfs.
+			 */
+			ci->role = CI_ROLE_GADGET;
+		}
+	} else {
+		ci->role = ci->roles[CI_ROLE_HOST]
+			? CI_ROLE_HOST
+			: CI_ROLE_GADGET;
+	}
+
+	if (!ci_otg_is_fsm_mode(ci)) {
+		/* only update vbus status for peripheral */
+		if (ci->role == CI_ROLE_GADGET) {
+			/* Pull down DP for possible charger detection */
+			hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+			ci_handle_vbus_change(ci);
+		}
+
+		ret = ci_role_start(ci, ci->role);
+		if (ret) {
+			dev_err(dev, "can't start %s role\n",
+						ci_role(ci)->name);
+			goto stop;
+		}
+	}
+
+	ret = devm_request_irq(dev, ci->irq, ci_irq_handler, IRQF_SHARED,
+			ci->platdata->name, ci);
+	if (ret)
+		goto stop;
+
+	ret = ci_extcon_register(ci);
+	if (ret)
+		goto stop;
+
+	if (ci->supports_runtime_pm) {
+		pm_runtime_set_active(&pdev->dev);
+		pm_runtime_enable(&pdev->dev);
+		pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
+		pm_runtime_mark_last_busy(ci->dev);
+		pm_runtime_use_autosuspend(&pdev->dev);
+	}
+
+	if (ci_otg_is_fsm_mode(ci))
+		ci_hdrc_otg_fsm_start(ci);
+
+	device_set_wakeup_capable(&pdev->dev, true);
+	dbg_create_files(ci);
+
+	return 0;
+
+stop:
+	if (ci->role_switch)
+		usb_role_switch_unregister(ci->role_switch);
+deinit_otg:
+	if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
+		ci_hdrc_otg_destroy(ci);
+deinit_gadget:
+	ci_hdrc_gadget_destroy(ci);
+deinit_host:
+	ci_hdrc_host_destroy(ci);
+deinit_phy:
+	ci_usb_phy_exit(ci);
+ulpi_exit:
+	ci_ulpi_exit(ci);
+
+	return ret;
+}
+
+static int ci_hdrc_remove(struct platform_device *pdev)
+{
+	struct ci_hdrc *ci = platform_get_drvdata(pdev);
+
+	if (ci->role_switch)
+		usb_role_switch_unregister(ci->role_switch);
+
+	if (ci->supports_runtime_pm) {
+		pm_runtime_get_sync(&pdev->dev);
+		pm_runtime_disable(&pdev->dev);
+		pm_runtime_put_noidle(&pdev->dev);
+	}
+
+	dbg_remove_files(ci);
+	ci_role_destroy(ci);
+	ci_hdrc_enter_lpm(ci, true);
+	ci_usb_phy_exit(ci);
+	ci_ulpi_exit(ci);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+/* Prepare wakeup by SRP before suspend */
+static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
+{
+	if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
+				!hw_read_otgsc(ci, OTGSC_ID)) {
+		hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP,
+								PORTSC_PP);
+		hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_WKCN,
+								PORTSC_WKCN);
+	}
+}
+
+/* Handle SRP when wakeup by data pulse */
+static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
+{
+	if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
+		(ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) {
+		if (!hw_read_otgsc(ci, OTGSC_ID)) {
+			ci->fsm.a_srp_det = 1;
+			ci->fsm.a_bus_drop = 0;
+		} else {
+			ci->fsm.id = 1;
+		}
+		ci_otg_queue_work(ci);
+	}
+}
+
+static void ci_controller_suspend(struct ci_hdrc *ci)
+{
+	disable_irq(ci->irq);
+	ci_hdrc_enter_lpm(ci, true);
+	if (ci->platdata->phy_clkgate_delay_us)
+		usleep_range(ci->platdata->phy_clkgate_delay_us,
+			     ci->platdata->phy_clkgate_delay_us + 50);
+	usb_phy_set_suspend(ci->usb_phy, 1);
+	ci->in_lpm = true;
+	enable_irq(ci->irq);
+}
+
+/*
+ * Handle the wakeup interrupt triggered by extcon connector
+ * We need to call ci_irq again for extcon since the first
+ * interrupt (wakeup int) only let the controller be out of
+ * low power mode, but not handle any interrupts.
+ */
+static void ci_extcon_wakeup_int(struct ci_hdrc *ci)
+{
+	struct ci_hdrc_cable *cable_id, *cable_vbus;
+	u32 otgsc = hw_read_otgsc(ci, ~0);
+
+	cable_id = &ci->platdata->id_extcon;
+	cable_vbus = &ci->platdata->vbus_extcon;
+
+	if (!IS_ERR(cable_id->edev) && ci->is_otg &&
+		(otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS))
+		ci_irq(ci);
+
+	if (!IS_ERR(cable_vbus->edev) && ci->is_otg &&
+		(otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS))
+		ci_irq(ci);
+}
+
+static int ci_controller_resume(struct device *dev)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+	int ret;
+
+	dev_dbg(dev, "at %s\n", __func__);
+
+	if (!ci->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	ci_hdrc_enter_lpm(ci, false);
+
+	ret = ci_ulpi_resume(ci);
+	if (ret)
+		return ret;
+
+	if (ci->usb_phy) {
+		usb_phy_set_suspend(ci->usb_phy, 0);
+		usb_phy_set_wakeup(ci->usb_phy, false);
+		hw_wait_phy_stable();
+	}
+
+	ci->in_lpm = false;
+	if (ci->wakeup_int) {
+		ci->wakeup_int = false;
+		pm_runtime_mark_last_busy(ci->dev);
+		pm_runtime_put_autosuspend(ci->dev);
+		enable_irq(ci->irq);
+		if (ci_otg_is_fsm_mode(ci))
+			ci_otg_fsm_wakeup_by_srp(ci);
+		ci_extcon_wakeup_int(ci);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ci_suspend(struct device *dev)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+
+	if (ci->wq)
+		flush_workqueue(ci->wq);
+	/*
+	 * Controller needs to be active during suspend, otherwise the core
+	 * may run resume when the parent is at suspend if other driver's
+	 * suspend fails, it occurs before parent's suspend has not started,
+	 * but the core suspend has finished.
+	 */
+	if (ci->in_lpm)
+		pm_runtime_resume(dev);
+
+	if (ci->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	if (device_may_wakeup(dev)) {
+		if (ci_otg_is_fsm_mode(ci))
+			ci_otg_fsm_suspend_for_srp(ci);
+
+		usb_phy_set_wakeup(ci->usb_phy, true);
+		enable_irq_wake(ci->irq);
+	}
+
+	ci_controller_suspend(ci);
+
+	return 0;
+}
+
+static int ci_resume(struct device *dev)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+	int ret;
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(ci->irq);
+
+	ret = ci_controller_resume(dev);
+	if (ret)
+		return ret;
+
+	if (ci->supports_runtime_pm) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static int ci_runtime_suspend(struct device *dev)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "at %s\n", __func__);
+
+	if (ci->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	if (ci_otg_is_fsm_mode(ci))
+		ci_otg_fsm_suspend_for_srp(ci);
+
+	usb_phy_set_wakeup(ci->usb_phy, true);
+	ci_controller_suspend(ci);
+
+	return 0;
+}
+
+static int ci_runtime_resume(struct device *dev)
+{
+	return ci_controller_resume(dev);
+}
+
+#endif /* CONFIG_PM */
+static const struct dev_pm_ops ci_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume)
+	SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL)
+};
+
+static struct platform_driver ci_hdrc_driver = {
+	.probe	= ci_hdrc_probe,
+	.remove	= ci_hdrc_remove,
+	.driver	= {
+		.name	= "ci_hdrc",
+		.pm	= &ci_pm_ops,
+		.dev_groups = ci_groups,
+	},
+};
+
+static int __init ci_hdrc_platform_register(void)
+{
+	ci_hdrc_host_driver_init();
+	return platform_driver_register(&ci_hdrc_driver);
+}
+module_init(ci_hdrc_platform_register);
+
+static void __exit ci_hdrc_platform_unregister(void)
+{
+	platform_driver_unregister(&ci_hdrc_driver);
+}
+module_exit(ci_hdrc_platform_unregister);
+
+MODULE_ALIAS("platform:ci_hdrc");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>");
+MODULE_DESCRIPTION("ChipIdea HDRC Driver");
diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
new file mode 100644
index 000000000..bbc610e5b
--- /dev/null
+++ b/drivers/usb/chipidea/debug.c
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/otg-fsm.h>
+#include <linux/usb/chipidea.h>
+
+#include "ci.h"
+#include "udc.h"
+#include "bits.h"
+#include "otg.h"
+
+/*
+ * ci_device_show: prints information about device capabilities and status
+ */
+static int ci_device_show(struct seq_file *s, void *data)
+{
+	struct ci_hdrc *ci = s->private;
+	struct usb_gadget *gadget = &ci->gadget;
+
+	seq_printf(s, "speed             = %d\n", gadget->speed);
+	seq_printf(s, "max_speed         = %d\n", gadget->max_speed);
+	seq_printf(s, "is_otg            = %d\n", gadget->is_otg);
+	seq_printf(s, "is_a_peripheral   = %d\n", gadget->is_a_peripheral);
+	seq_printf(s, "b_hnp_enable      = %d\n", gadget->b_hnp_enable);
+	seq_printf(s, "a_hnp_support     = %d\n", gadget->a_hnp_support);
+	seq_printf(s, "a_alt_hnp_support = %d\n", gadget->a_alt_hnp_support);
+	seq_printf(s, "name              = %s\n",
+		   (gadget->name ? gadget->name : ""));
+
+	if (!ci->driver)
+		return 0;
+
+	seq_printf(s, "gadget function   = %s\n",
+		       (ci->driver->function ? ci->driver->function : ""));
+	seq_printf(s, "gadget max speed  = %d\n", ci->driver->max_speed);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(ci_device);
+
+/*
+ * ci_port_test_show: reads port test mode
+ */
+static int ci_port_test_show(struct seq_file *s, void *data)
+{
+	struct ci_hdrc *ci = s->private;
+	unsigned long flags;
+	unsigned mode;
+
+	pm_runtime_get_sync(ci->dev);
+	spin_lock_irqsave(&ci->lock, flags);
+	mode = hw_port_test_get(ci);
+	spin_unlock_irqrestore(&ci->lock, flags);
+	pm_runtime_put_sync(ci->dev);
+
+	seq_printf(s, "mode = %u\n", mode);
+
+	return 0;
+}
+
+/*
+ * ci_port_test_write: writes port test mode
+ */
+static ssize_t ci_port_test_write(struct file *file, const char __user *ubuf,
+				  size_t count, loff_t *ppos)
+{
+	struct seq_file *s = file->private_data;
+	struct ci_hdrc *ci = s->private;
+	unsigned long flags;
+	unsigned mode;
+	char buf[32];
+	int ret;
+
+	count = min_t(size_t, sizeof(buf) - 1, count);
+	if (copy_from_user(buf, ubuf, count))
+		return -EFAULT;
+
+	/* sscanf requires a zero terminated string */
+	buf[count] = '\0';
+
+	if (sscanf(buf, "%u", &mode) != 1)
+		return -EINVAL;
+
+	if (mode > 255)
+		return -EBADRQC;
+
+	pm_runtime_get_sync(ci->dev);
+	spin_lock_irqsave(&ci->lock, flags);
+	ret = hw_port_test_set(ci, mode);
+	spin_unlock_irqrestore(&ci->lock, flags);
+	pm_runtime_put_sync(ci->dev);
+
+	return ret ? ret : count;
+}
+
+static int ci_port_test_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ci_port_test_show, inode->i_private);
+}
+
+static const struct file_operations ci_port_test_fops = {
+	.open		= ci_port_test_open,
+	.write		= ci_port_test_write,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+/*
+ * ci_qheads_show: DMA contents of all queue heads
+ */
+static int ci_qheads_show(struct seq_file *s, void *data)
+{
+	struct ci_hdrc *ci = s->private;
+	unsigned long flags;
+	unsigned i, j;
+
+	if (ci->role != CI_ROLE_GADGET) {
+		seq_printf(s, "not in gadget mode\n");
+		return 0;
+	}
+
+	spin_lock_irqsave(&ci->lock, flags);
+	for (i = 0; i < ci->hw_ep_max/2; i++) {
+		struct ci_hw_ep *hweprx = &ci->ci_hw_ep[i];
+		struct ci_hw_ep *hweptx =
+			&ci->ci_hw_ep[i + ci->hw_ep_max/2];
+		seq_printf(s, "EP=%02i: RX=%08X TX=%08X\n",
+			   i, (u32)hweprx->qh.dma, (u32)hweptx->qh.dma);
+		for (j = 0; j < (sizeof(struct ci_hw_qh)/sizeof(u32)); j++)
+			seq_printf(s, " %04X:    %08X    %08X\n", j,
+				   *((u32 *)hweprx->qh.ptr + j),
+				   *((u32 *)hweptx->qh.ptr + j));
+	}
+	spin_unlock_irqrestore(&ci->lock, flags);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(ci_qheads);
+
+/*
+ * ci_requests_show: DMA contents of all requests currently queued (all endpts)
+ */
+static int ci_requests_show(struct seq_file *s, void *data)
+{
+	struct ci_hdrc *ci = s->private;
+	unsigned long flags;
+	struct ci_hw_req *req = NULL;
+	struct td_node *node, *tmpnode;
+	unsigned i, j, qsize = sizeof(struct ci_hw_td)/sizeof(u32);
+
+	if (ci->role != CI_ROLE_GADGET) {
+		seq_printf(s, "not in gadget mode\n");
+		return 0;
+	}
+
+	spin_lock_irqsave(&ci->lock, flags);
+	for (i = 0; i < ci->hw_ep_max; i++)
+		list_for_each_entry(req, &ci->ci_hw_ep[i].qh.queue, queue) {
+			list_for_each_entry_safe(node, tmpnode, &req->tds, td) {
+				seq_printf(s, "EP=%02i: TD=%08X %s\n",
+					   i % (ci->hw_ep_max / 2),
+					   (u32)node->dma,
+					   ((i < ci->hw_ep_max/2) ?
+					   "RX" : "TX"));
+
+				for (j = 0; j < qsize; j++)
+					seq_printf(s, " %04X:    %08X\n", j,
+						   *((u32 *)node->ptr + j));
+			}
+		}
+	spin_unlock_irqrestore(&ci->lock, flags);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(ci_requests);
+
+static int ci_otg_show(struct seq_file *s, void *unused)
+{
+	struct ci_hdrc *ci = s->private;
+	struct otg_fsm *fsm;
+
+	if (!ci || !ci_otg_is_fsm_mode(ci))
+		return 0;
+
+	fsm = &ci->fsm;
+
+	/* ------ State ----- */
+	seq_printf(s, "OTG state: %s\n\n",
+			usb_otg_state_string(ci->otg.state));
+
+	/* ------ State Machine Variables ----- */
+	seq_printf(s, "a_bus_drop: %d\n", fsm->a_bus_drop);
+
+	seq_printf(s, "a_bus_req: %d\n", fsm->a_bus_req);
+
+	seq_printf(s, "a_srp_det: %d\n", fsm->a_srp_det);
+
+	seq_printf(s, "a_vbus_vld: %d\n", fsm->a_vbus_vld);
+
+	seq_printf(s, "b_conn: %d\n", fsm->b_conn);
+
+	seq_printf(s, "adp_change: %d\n", fsm->adp_change);
+
+	seq_printf(s, "power_up: %d\n", fsm->power_up);
+
+	seq_printf(s, "a_bus_resume: %d\n", fsm->a_bus_resume);
+
+	seq_printf(s, "a_bus_suspend: %d\n", fsm->a_bus_suspend);
+
+	seq_printf(s, "a_conn: %d\n", fsm->a_conn);
+
+	seq_printf(s, "b_bus_req: %d\n", fsm->b_bus_req);
+
+	seq_printf(s, "b_bus_suspend: %d\n", fsm->b_bus_suspend);
+
+	seq_printf(s, "b_se0_srp: %d\n", fsm->b_se0_srp);
+
+	seq_printf(s, "b_ssend_srp: %d\n", fsm->b_ssend_srp);
+
+	seq_printf(s, "b_sess_vld: %d\n", fsm->b_sess_vld);
+
+	seq_printf(s, "b_srp_done: %d\n", fsm->b_srp_done);
+
+	seq_printf(s, "drv_vbus: %d\n", fsm->drv_vbus);
+
+	seq_printf(s, "loc_conn: %d\n", fsm->loc_conn);
+
+	seq_printf(s, "loc_sof: %d\n", fsm->loc_sof);
+
+	seq_printf(s, "adp_prb: %d\n", fsm->adp_prb);
+
+	seq_printf(s, "id: %d\n", fsm->id);
+
+	seq_printf(s, "protocol: %d\n", fsm->protocol);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(ci_otg);
+
+static int ci_role_show(struct seq_file *s, void *data)
+{
+	struct ci_hdrc *ci = s->private;
+
+	if (ci->role != CI_ROLE_END)
+		seq_printf(s, "%s\n", ci_role(ci)->name);
+
+	return 0;
+}
+
+static ssize_t ci_role_write(struct file *file, const char __user *ubuf,
+			     size_t count, loff_t *ppos)
+{
+	struct seq_file *s = file->private_data;
+	struct ci_hdrc *ci = s->private;
+	enum ci_role role;
+	char buf[8];
+	int ret;
+
+	if (copy_from_user(buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	for (role = CI_ROLE_HOST; role < CI_ROLE_END; role++)
+		if (ci->roles[role] &&
+		    !strncmp(buf, ci->roles[role]->name,
+			     strlen(ci->roles[role]->name)))
+			break;
+
+	if (role == CI_ROLE_END || role == ci->role)
+		return -EINVAL;
+
+	pm_runtime_get_sync(ci->dev);
+	disable_irq(ci->irq);
+	ci_role_stop(ci);
+	ret = ci_role_start(ci, role);
+	enable_irq(ci->irq);
+	pm_runtime_put_sync(ci->dev);
+
+	return ret ? ret : count;
+}
+
+static int ci_role_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ci_role_show, inode->i_private);
+}
+
+static const struct file_operations ci_role_fops = {
+	.open		= ci_role_open,
+	.write		= ci_role_write,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int ci_registers_show(struct seq_file *s, void *unused)
+{
+	struct ci_hdrc *ci = s->private;
+	u32 tmp_reg;
+
+	if (!ci || ci->in_lpm)
+		return -EPERM;
+
+	/* ------ Registers ----- */
+	tmp_reg = hw_read_intr_enable(ci);
+	seq_printf(s, "USBINTR reg: %08x\n", tmp_reg);
+
+	tmp_reg = hw_read_intr_status(ci);
+	seq_printf(s, "USBSTS reg: %08x\n", tmp_reg);
+
+	tmp_reg = hw_read(ci, OP_USBMODE, ~0);
+	seq_printf(s, "USBMODE reg: %08x\n", tmp_reg);
+
+	tmp_reg = hw_read(ci, OP_USBCMD, ~0);
+	seq_printf(s, "USBCMD reg: %08x\n", tmp_reg);
+
+	tmp_reg = hw_read(ci, OP_PORTSC, ~0);
+	seq_printf(s, "PORTSC reg: %08x\n", tmp_reg);
+
+	if (ci->is_otg) {
+		tmp_reg = hw_read_otgsc(ci, ~0);
+		seq_printf(s, "OTGSC reg: %08x\n", tmp_reg);
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(ci_registers);
+
+/**
+ * dbg_create_files: initializes the attribute interface
+ * @ci: device
+ *
+ * This function returns an error code
+ */
+void dbg_create_files(struct ci_hdrc *ci)
+{
+	struct dentry *dir;
+
+	dir = debugfs_create_dir(dev_name(ci->dev), usb_debug_root);
+
+	debugfs_create_file("device", S_IRUGO, dir, ci, &ci_device_fops);
+	debugfs_create_file("port_test", S_IRUGO | S_IWUSR, dir, ci, &ci_port_test_fops);
+	debugfs_create_file("qheads", S_IRUGO, dir, ci, &ci_qheads_fops);
+	debugfs_create_file("requests", S_IRUGO, dir, ci, &ci_requests_fops);
+
+	if (ci_otg_is_fsm_mode(ci))
+		debugfs_create_file("otg", S_IRUGO, dir, ci, &ci_otg_fops);
+
+	debugfs_create_file("role", S_IRUGO | S_IWUSR, dir, ci, &ci_role_fops);
+	debugfs_create_file("registers", S_IRUGO, dir, ci, &ci_registers_fops);
+}
+
+/**
+ * dbg_remove_files: destroys the attribute interface
+ * @ci: device
+ */
+void dbg_remove_files(struct ci_hdrc *ci)
+{
+	debugfs_lookup_and_remove(dev_name(ci->dev), usb_debug_root);
+}
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
new file mode 100644
index 000000000..34bbdfadd
--- /dev/null
+++ b/drivers/usb/chipidea/host.c
@@ -0,0 +1,486 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * host.c - ChipIdea USB host controller driver
+ *
+ * Copyright (c) 2012 Intel Corporation
+ *
+ * Author: Alexander Shishkin
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/chipidea.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pinctrl/consumer.h>
+
+#include "../host/ehci.h"
+
+#include "ci.h"
+#include "bits.h"
+#include "host.h"
+
+static struct hc_driver __read_mostly ci_ehci_hc_driver;
+static int (*orig_bus_suspend)(struct usb_hcd *hcd);
+
+struct ehci_ci_priv {
+	struct regulator *reg_vbus;
+	bool enabled;
+};
+
+struct ci_hdrc_dma_aligned_buffer {
+	void *original_buffer;
+	u8 data[];
+};
+
+static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv;
+	struct device *dev = hcd->self.controller;
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+	int ret = 0;
+	int port = HCS_N_PORTS(ehci->hcs_params);
+
+	if (priv->reg_vbus && enable != priv->enabled) {
+		if (port > 1) {
+			dev_warn(dev,
+				"Not support multi-port regulator control\n");
+			return 0;
+		}
+		if (enable)
+			ret = regulator_enable(priv->reg_vbus);
+		else
+			ret = regulator_disable(priv->reg_vbus);
+		if (ret) {
+			dev_err(dev,
+				"Failed to %s vbus regulator, ret=%d\n",
+				enable ? "enable" : "disable", ret);
+			return ret;
+		}
+		priv->enabled = enable;
+	}
+
+	if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL) {
+		if (enable)
+			usb_phy_vbus_on(ci->usb_phy);
+		else
+			usb_phy_vbus_off(ci->usb_phy);
+	}
+
+	if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) {
+		/*
+		 * Marvell 28nm HSIC PHY requires forcing the port to HS mode.
+		 * As HSIC is always HS, this should be safe for others.
+		 */
+		hw_port_test_set(ci, 5);
+		hw_port_test_set(ci, 0);
+	}
+	return 0;
+};
+
+static int ehci_ci_reset(struct usb_hcd *hcd)
+{
+	struct device *dev = hcd->self.controller;
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int ret;
+
+	ret = ehci_setup(hcd);
+	if (ret)
+		return ret;
+
+	ehci->need_io_watchdog = 0;
+
+	if (ci->platdata->notify_event) {
+		ret = ci->platdata->notify_event(ci,
+				CI_HDRC_CONTROLLER_RESET_EVENT);
+		if (ret)
+			return ret;
+	}
+
+	ci_platform_configure(ci);
+
+	return ret;
+}
+
+static const struct ehci_driver_overrides ehci_ci_overrides = {
+	.extra_priv_size = sizeof(struct ehci_ci_priv),
+	.port_power	 = ehci_ci_portpower,
+	.reset		 = ehci_ci_reset,
+};
+
+static irqreturn_t host_irq(struct ci_hdrc *ci)
+{
+	return usb_hcd_irq(ci->irq, ci->hcd);
+}
+
+static int host_start(struct ci_hdrc *ci)
+{
+	struct usb_hcd *hcd;
+	struct ehci_hcd *ehci;
+	struct ehci_ci_priv *priv;
+	int ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	hcd = __usb_create_hcd(&ci_ehci_hc_driver, ci->dev->parent,
+			       ci->dev, dev_name(ci->dev), NULL);
+	if (!hcd)
+		return -ENOMEM;
+
+	dev_set_drvdata(ci->dev, ci);
+	hcd->rsrc_start = ci->hw_bank.phys;
+	hcd->rsrc_len = ci->hw_bank.size;
+	hcd->regs = ci->hw_bank.abs;
+	hcd->has_tt = 1;
+
+	hcd->power_budget = ci->platdata->power_budget;
+	hcd->tpl_support = ci->platdata->tpl_support;
+	if (ci->phy || ci->usb_phy) {
+		hcd->skip_phy_initialization = 1;
+		if (ci->usb_phy)
+			hcd->usb_phy = ci->usb_phy;
+	}
+
+	ehci = hcd_to_ehci(hcd);
+	ehci->caps = ci->hw_bank.cap;
+	ehci->has_hostpc = ci->hw_bank.lpm;
+	ehci->has_tdi_phy_lpm = ci->hw_bank.lpm;
+	ehci->imx28_write_fix = ci->imx28_write_fix;
+	ehci->has_ci_pec_bug = ci->has_portsc_pec_bug;
+
+	priv = (struct ehci_ci_priv *)ehci->priv;
+	priv->reg_vbus = NULL;
+
+	if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
+		if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) {
+			ret = regulator_enable(ci->platdata->reg_vbus);
+			if (ret) {
+				dev_err(ci->dev,
+				"Failed to enable vbus regulator, ret=%d\n",
+									ret);
+				goto put_hcd;
+			}
+		} else {
+			priv->reg_vbus = ci->platdata->reg_vbus;
+		}
+	}
+
+	if (ci->platdata->pins_host)
+		pinctrl_select_state(ci->platdata->pctl,
+				     ci->platdata->pins_host);
+
+	ci->hcd = hcd;
+
+	ret = usb_add_hcd(hcd, 0, 0);
+	if (ret) {
+		ci->hcd = NULL;
+		goto disable_reg;
+	} else {
+		struct usb_otg *otg = &ci->otg;
+
+		if (ci_otg_is_fsm_mode(ci)) {
+			otg->host = &hcd->self;
+			hcd->self.otg_port = 1;
+		}
+
+		if (ci->platdata->notify_event &&
+			(ci->platdata->flags & CI_HDRC_IMX_IS_HSIC))
+			ci->platdata->notify_event
+				(ci, CI_HDRC_IMX_HSIC_ACTIVE_EVENT);
+	}
+
+	return ret;
+
+disable_reg:
+	if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
+			(ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
+		regulator_disable(ci->platdata->reg_vbus);
+put_hcd:
+	usb_put_hcd(hcd);
+
+	return ret;
+}
+
+static void host_stop(struct ci_hdrc *ci)
+{
+	struct usb_hcd *hcd = ci->hcd;
+
+	if (hcd) {
+		if (ci->platdata->notify_event)
+			ci->platdata->notify_event(ci,
+				CI_HDRC_CONTROLLER_STOPPED_EVENT);
+		usb_remove_hcd(hcd);
+		ci->role = CI_ROLE_END;
+		synchronize_irq(ci->irq);
+		usb_put_hcd(hcd);
+		if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
+			(ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
+				regulator_disable(ci->platdata->reg_vbus);
+	}
+	ci->hcd = NULL;
+	ci->otg.host = NULL;
+
+	if (ci->platdata->pins_host && ci->platdata->pins_default)
+		pinctrl_select_state(ci->platdata->pctl,
+				     ci->platdata->pins_default);
+}
+
+
+void ci_hdrc_host_destroy(struct ci_hdrc *ci)
+{
+	if (ci->role == CI_ROLE_HOST && ci->hcd)
+		host_stop(ci);
+}
+
+/* The below code is based on tegra ehci driver */
+static int ci_ehci_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength
+)
+{
+	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
+	unsigned int	ports = HCS_N_PORTS(ehci->hcs_params);
+	u32 __iomem	*status_reg;
+	u32		temp, port_index;
+	unsigned long	flags;
+	int		retval = 0;
+	bool		done = false;
+	struct device *dev = hcd->self.controller;
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+
+	port_index = wIndex & 0xff;
+	port_index -= (port_index > 0);
+	status_reg = &ehci->regs->port_status[port_index];
+
+	spin_lock_irqsave(&ehci->lock, flags);
+
+	if (ci->platdata->hub_control) {
+		retval = ci->platdata->hub_control(ci, typeReq, wValue, wIndex,
+						   buf, wLength, &done, &flags);
+		if (done)
+			goto done;
+	}
+
+	if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
+		if (!wIndex || wIndex > ports) {
+			retval = -EPIPE;
+			goto done;
+		}
+
+		temp = ehci_readl(ehci, status_reg);
+		if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
+			retval = -EPIPE;
+			goto done;
+		}
+
+		temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E);
+		temp |= PORT_WKDISC_E | PORT_WKOC_E;
+		ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+
+		/*
+		 * If a transaction is in progress, there may be a delay in
+		 * suspending the port. Poll until the port is suspended.
+		 */
+		if (ehci_handshake(ehci, status_reg, PORT_SUSPEND,
+			PORT_SUSPEND, 5000))
+			ehci_err(ehci, "timeout waiting for SUSPEND\n");
+
+		if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) {
+			if (ci->platdata->notify_event)
+				ci->platdata->notify_event(ci,
+					CI_HDRC_IMX_HSIC_SUSPEND_EVENT);
+
+			temp = ehci_readl(ehci, status_reg);
+			temp &= ~(PORT_WKDISC_E | PORT_WKCONN_E);
+			ehci_writel(ehci, temp, status_reg);
+		}
+
+		set_bit(port_index, &ehci->suspended_ports);
+		goto done;
+	}
+
+	/*
+	 * After resume has finished, it needs do some post resume
+	 * operation for some SoCs.
+	 */
+	else if (typeReq == ClearPortFeature &&
+		wValue == USB_PORT_FEAT_C_SUSPEND) {
+		/* Make sure the resume has finished, it should be finished */
+		if (ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 25000))
+			ehci_err(ehci, "timeout waiting for resume\n");
+	}
+
+	spin_unlock_irqrestore(&ehci->lock, flags);
+
+	/* Handle the hub control events here */
+	return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+done:
+	spin_unlock_irqrestore(&ehci->lock, flags);
+	return retval;
+}
+static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	struct device *dev = hcd->self.controller;
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+	int port;
+	u32 tmp;
+
+	int ret = orig_bus_suspend(hcd);
+
+	if (ret)
+		return ret;
+
+	port = HCS_N_PORTS(ehci->hcs_params);
+	while (port--) {
+		u32 __iomem *reg = &ehci->regs->port_status[port];
+		u32 portsc = ehci_readl(ehci, reg);
+
+		if (portsc & PORT_CONNECT) {
+			/*
+			 * For chipidea, the resume signal will be ended
+			 * automatically, so for remote wakeup case, the
+			 * usbcmd.rs may not be set before the resume has
+			 * ended if other resume paths consumes too much
+			 * time (~24ms), in that case, the SOF will not
+			 * send out within 3ms after resume ends, then the
+			 * high speed device will enter full speed mode.
+			 */
+
+			tmp = ehci_readl(ehci, &ehci->regs->command);
+			tmp |= CMD_RUN;
+			ehci_writel(ehci, tmp, &ehci->regs->command);
+			/*
+			 * It needs a short delay between set RS bit and PHCD.
+			 */
+			usleep_range(150, 200);
+			/*
+			 * Need to clear WKCN and WKOC for imx HSIC,
+			 * otherwise, there will be wakeup event.
+			 */
+			if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) {
+				tmp = ehci_readl(ehci, reg);
+				tmp &= ~(PORT_WKDISC_E | PORT_WKCONN_E);
+				ehci_writel(ehci, tmp, reg);
+			}
+
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static void ci_hdrc_free_dma_aligned_buffer(struct urb *urb, bool copy_back)
+{
+	struct ci_hdrc_dma_aligned_buffer *temp;
+
+	if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
+		return;
+	urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
+
+	temp = container_of(urb->transfer_buffer,
+			    struct ci_hdrc_dma_aligned_buffer, data);
+	urb->transfer_buffer = temp->original_buffer;
+
+	if (copy_back && usb_urb_dir_in(urb)) {
+		size_t length;
+
+		if (usb_pipeisoc(urb->pipe))
+			length = urb->transfer_buffer_length;
+		else
+			length = urb->actual_length;
+
+		memcpy(temp->original_buffer, temp->data, length);
+	}
+
+	kfree(temp);
+}
+
+static int ci_hdrc_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
+{
+	struct ci_hdrc_dma_aligned_buffer *temp;
+
+	if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0)
+		return 0;
+	if (IS_ALIGNED((uintptr_t)urb->transfer_buffer, 4)
+	    && IS_ALIGNED(urb->transfer_buffer_length, 4))
+		return 0;
+
+	temp = kmalloc(sizeof(*temp) + ALIGN(urb->transfer_buffer_length, 4), mem_flags);
+	if (!temp)
+		return -ENOMEM;
+
+	if (usb_urb_dir_out(urb))
+		memcpy(temp->data, urb->transfer_buffer,
+		       urb->transfer_buffer_length);
+
+	temp->original_buffer = urb->transfer_buffer;
+	urb->transfer_buffer = temp->data;
+	urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;
+
+	return 0;
+}
+
+static int ci_hdrc_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+				   gfp_t mem_flags)
+{
+	int ret;
+
+	ret = ci_hdrc_alloc_dma_aligned_buffer(urb, mem_flags);
+	if (ret)
+		return ret;
+
+	ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+	if (ret)
+		ci_hdrc_free_dma_aligned_buffer(urb, false);
+
+	return ret;
+}
+
+static void ci_hdrc_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	usb_hcd_unmap_urb_for_dma(hcd, urb);
+	ci_hdrc_free_dma_aligned_buffer(urb, true);
+}
+
+int ci_hdrc_host_init(struct ci_hdrc *ci)
+{
+	struct ci_role_driver *rdrv;
+
+	if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_HC))
+		return -ENXIO;
+
+	rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
+	if (!rdrv)
+		return -ENOMEM;
+
+	rdrv->start	= host_start;
+	rdrv->stop	= host_stop;
+	rdrv->irq	= host_irq;
+	rdrv->name	= "host";
+	ci->roles[CI_ROLE_HOST] = rdrv;
+
+	if (ci->platdata->flags & CI_HDRC_REQUIRES_ALIGNED_DMA) {
+		ci_ehci_hc_driver.map_urb_for_dma = ci_hdrc_map_urb_for_dma;
+		ci_ehci_hc_driver.unmap_urb_for_dma = ci_hdrc_unmap_urb_for_dma;
+	}
+
+	return 0;
+}
+
+void ci_hdrc_host_driver_init(void)
+{
+	ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides);
+	orig_bus_suspend = ci_ehci_hc_driver.bus_suspend;
+	ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend;
+	ci_ehci_hc_driver.hub_control = ci_ehci_hub_control;
+}
diff --git a/drivers/usb/chipidea/host.h b/drivers/usb/chipidea/host.h
new file mode 100644
index 000000000..2625aa01a
--- /dev/null
+++ b/drivers/usb/chipidea/host.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DRIVERS_USB_CHIPIDEA_HOST_H
+#define __DRIVERS_USB_CHIPIDEA_HOST_H
+
+#ifdef CONFIG_USB_CHIPIDEA_HOST
+
+int ci_hdrc_host_init(struct ci_hdrc *ci);
+void ci_hdrc_host_destroy(struct ci_hdrc *ci);
+void ci_hdrc_host_driver_init(void);
+
+#else
+
+static inline int ci_hdrc_host_init(struct ci_hdrc *ci)
+{
+	return -ENXIO;
+}
+
+static inline void ci_hdrc_host_destroy(struct ci_hdrc *ci)
+{
+
+}
+
+static inline void ci_hdrc_host_driver_init(void)
+{
+
+}
+
+#endif
+
+#endif /* __DRIVERS_USB_CHIPIDEA_HOST_H */
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
new file mode 100644
index 000000000..10f8cc44a
--- /dev/null
+++ b/drivers/usb/chipidea/otg.c
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * otg.c - ChipIdea USB IP core OTG driver
+ *
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Peter Chen
+ */
+
+/*
+ * This file mainly handles otgsc register, OTG fsm operations for HNP and SRP
+ * are also included.
+ */
+
+#include <linux/usb/otg.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/chipidea.h>
+
+#include "ci.h"
+#include "bits.h"
+#include "otg.h"
+#include "otg_fsm.h"
+
+/**
+ * hw_read_otgsc - returns otgsc register bits value.
+ * @ci: the controller
+ * @mask: bitfield mask
+ */
+u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
+{
+	struct ci_hdrc_cable *cable;
+	u32 val = hw_read(ci, OP_OTGSC, mask);
+
+	/*
+	 * If using extcon framework for VBUS and/or ID signal
+	 * detection overwrite OTGSC register value
+	 */
+	cable = &ci->platdata->vbus_extcon;
+	if (!IS_ERR(cable->edev) || ci->role_switch) {
+		if (cable->changed)
+			val |= OTGSC_BSVIS;
+		else
+			val &= ~OTGSC_BSVIS;
+
+		if (cable->connected)
+			val |= OTGSC_BSV;
+		else
+			val &= ~OTGSC_BSV;
+
+		if (cable->enabled)
+			val |= OTGSC_BSVIE;
+		else
+			val &= ~OTGSC_BSVIE;
+	}
+
+	cable = &ci->platdata->id_extcon;
+	if (!IS_ERR(cable->edev) || ci->role_switch) {
+		if (cable->changed)
+			val |= OTGSC_IDIS;
+		else
+			val &= ~OTGSC_IDIS;
+
+		if (cable->connected)
+			val &= ~OTGSC_ID; /* host */
+		else
+			val |= OTGSC_ID; /* device */
+
+		if (cable->enabled)
+			val |= OTGSC_IDIE;
+		else
+			val &= ~OTGSC_IDIE;
+	}
+
+	return val & mask;
+}
+
+/**
+ * hw_write_otgsc - updates target bits of OTGSC register.
+ * @ci: the controller
+ * @mask: bitfield mask
+ * @data: to be written
+ */
+void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data)
+{
+	struct ci_hdrc_cable *cable;
+
+	cable = &ci->platdata->vbus_extcon;
+	if (!IS_ERR(cable->edev) || ci->role_switch) {
+		if (data & mask & OTGSC_BSVIS)
+			cable->changed = false;
+
+		/* Don't enable vbus interrupt if using external notifier */
+		if (data & mask & OTGSC_BSVIE) {
+			cable->enabled = true;
+			data &= ~OTGSC_BSVIE;
+		} else if (mask & OTGSC_BSVIE) {
+			cable->enabled = false;
+		}
+	}
+
+	cable = &ci->platdata->id_extcon;
+	if (!IS_ERR(cable->edev) || ci->role_switch) {
+		if (data & mask & OTGSC_IDIS)
+			cable->changed = false;
+
+		/* Don't enable id interrupt if using external notifier */
+		if (data & mask & OTGSC_IDIE) {
+			cable->enabled = true;
+			data &= ~OTGSC_IDIE;
+		} else if (mask & OTGSC_IDIE) {
+			cable->enabled = false;
+		}
+	}
+
+	hw_write(ci, OP_OTGSC, mask | OTGSC_INT_STATUS_BITS, data);
+}
+
+/**
+ * ci_otg_role - pick role based on ID pin state
+ * @ci: the controller
+ */
+enum ci_role ci_otg_role(struct ci_hdrc *ci)
+{
+	enum ci_role role = hw_read_otgsc(ci, OTGSC_ID)
+		? CI_ROLE_GADGET
+		: CI_ROLE_HOST;
+
+	return role;
+}
+
+void ci_handle_vbus_change(struct ci_hdrc *ci)
+{
+	if (!ci->is_otg)
+		return;
+
+	if (hw_read_otgsc(ci, OTGSC_BSV) && !ci->vbus_active)
+		usb_gadget_vbus_connect(&ci->gadget);
+	else if (!hw_read_otgsc(ci, OTGSC_BSV) && ci->vbus_active)
+		usb_gadget_vbus_disconnect(&ci->gadget);
+}
+
+/**
+ * hw_wait_vbus_lower_bsv - When we switch to device mode, the vbus value
+ *                          should be lower than OTGSC_BSV before connecting
+ *                          to host.
+ *
+ * @ci: the controller
+ *
+ * This function returns an error code if timeout
+ */
+static int hw_wait_vbus_lower_bsv(struct ci_hdrc *ci)
+{
+	unsigned long elapse = jiffies + msecs_to_jiffies(5000);
+	u32 mask = OTGSC_BSV;
+
+	while (hw_read_otgsc(ci, mask)) {
+		if (time_after(jiffies, elapse)) {
+			dev_err(ci->dev, "timeout waiting for %08x in OTGSC\n",
+					mask);
+			return -ETIMEDOUT;
+		}
+		msleep(20);
+	}
+
+	return 0;
+}
+
+static void ci_handle_id_switch(struct ci_hdrc *ci)
+{
+	enum ci_role role;
+
+	mutex_lock(&ci->mutex);
+	role = ci_otg_role(ci);
+	if (role != ci->role) {
+		dev_dbg(ci->dev, "switching from %s to %s\n",
+			ci_role(ci)->name, ci->roles[role]->name);
+
+		if (ci->vbus_active && ci->role == CI_ROLE_GADGET)
+			/*
+			 * vbus disconnect event is lost due to role
+			 * switch occurs during system suspend.
+			 */
+			usb_gadget_vbus_disconnect(&ci->gadget);
+
+		ci_role_stop(ci);
+
+		if (role == CI_ROLE_GADGET &&
+				IS_ERR(ci->platdata->vbus_extcon.edev))
+			/*
+			 * Wait vbus lower than OTGSC_BSV before connecting
+			 * to host. If connecting status is from an external
+			 * connector instead of register, we don't need to
+			 * care vbus on the board, since it will not affect
+			 * external connector status.
+			 */
+			hw_wait_vbus_lower_bsv(ci);
+
+		ci_role_start(ci, role);
+		/* vbus change may have already occurred */
+		if (role == CI_ROLE_GADGET)
+			ci_handle_vbus_change(ci);
+	}
+	mutex_unlock(&ci->mutex);
+}
+/**
+ * ci_otg_work - perform otg (vbus/id) event handle
+ * @work: work struct
+ */
+static void ci_otg_work(struct work_struct *work)
+{
+	struct ci_hdrc *ci = container_of(work, struct ci_hdrc, work);
+
+	if (ci_otg_is_fsm_mode(ci) && !ci_otg_fsm_work(ci)) {
+		enable_irq(ci->irq);
+		return;
+	}
+
+	pm_runtime_get_sync(ci->dev);
+
+	if (ci->id_event) {
+		ci->id_event = false;
+		ci_handle_id_switch(ci);
+	}
+
+	if (ci->b_sess_valid_event) {
+		ci->b_sess_valid_event = false;
+		ci_handle_vbus_change(ci);
+	}
+
+	pm_runtime_put_sync(ci->dev);
+
+	enable_irq(ci->irq);
+}
+
+
+/**
+ * ci_hdrc_otg_init - initialize otg struct
+ * @ci: the controller
+ */
+int ci_hdrc_otg_init(struct ci_hdrc *ci)
+{
+	INIT_WORK(&ci->work, ci_otg_work);
+	ci->wq = create_freezable_workqueue("ci_otg");
+	if (!ci->wq) {
+		dev_err(ci->dev, "can't create workqueue\n");
+		return -ENODEV;
+	}
+
+	if (ci_otg_is_fsm_mode(ci))
+		return ci_hdrc_otg_fsm_init(ci);
+
+	return 0;
+}
+
+/**
+ * ci_hdrc_otg_destroy - destroy otg struct
+ * @ci: the controller
+ */
+void ci_hdrc_otg_destroy(struct ci_hdrc *ci)
+{
+	if (ci->wq)
+		destroy_workqueue(ci->wq);
+
+	/* Disable all OTG irq and clear status */
+	hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
+						OTGSC_INT_STATUS_BITS);
+	if (ci_otg_is_fsm_mode(ci))
+		ci_hdrc_otg_fsm_remove(ci);
+}
diff --git a/drivers/usb/chipidea/otg.h b/drivers/usb/chipidea/otg.h
new file mode 100644
index 000000000..5e7a6e571
--- /dev/null
+++ b/drivers/usb/chipidea/otg.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * Author: Peter Chen
+ */
+
+#ifndef __DRIVERS_USB_CHIPIDEA_OTG_H
+#define __DRIVERS_USB_CHIPIDEA_OTG_H
+
+u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask);
+void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data);
+int ci_hdrc_otg_init(struct ci_hdrc *ci);
+void ci_hdrc_otg_destroy(struct ci_hdrc *ci);
+enum ci_role ci_otg_role(struct ci_hdrc *ci);
+void ci_handle_vbus_change(struct ci_hdrc *ci);
+static inline void ci_otg_queue_work(struct ci_hdrc *ci)
+{
+	disable_irq_nosync(ci->irq);
+	if (queue_work(ci->wq, &ci->work) == false)
+		enable_irq(ci->irq);
+}
+
+#endif /* __DRIVERS_USB_CHIPIDEA_OTG_H */
diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c
new file mode 100644
index 000000000..c17516c29
--- /dev/null
+++ b/drivers/usb/chipidea/otg_fsm.c
@@ -0,0 +1,853 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * otg_fsm.c - ChipIdea USB IP core OTG FSM driver
+ *
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * Author: Jun Li
+ */
+
+/*
+ * This file mainly handles OTG fsm, it includes OTG fsm operations
+ * for HNP and SRP.
+ *
+ * TODO List
+ * - ADP
+ * - OTG test device
+ */
+
+#include <linux/usb/otg.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/chipidea.h>
+#include <linux/regulator/consumer.h>
+
+#include "ci.h"
+#include "bits.h"
+#include "otg.h"
+#include "otg_fsm.h"
+
+/* Add for otg: interact with user space app */
+static ssize_t
+a_bus_req_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	char		*next;
+	unsigned	size, t;
+	struct ci_hdrc	*ci = dev_get_drvdata(dev);
+
+	next = buf;
+	size = PAGE_SIZE;
+	t = scnprintf(next, size, "%d\n", ci->fsm.a_bus_req);
+	size -= t;
+	next += t;
+
+	return PAGE_SIZE - size;
+}
+
+static ssize_t
+a_bus_req_store(struct device *dev, struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+
+	if (count > 2)
+		return -1;
+
+	mutex_lock(&ci->fsm.lock);
+	if (buf[0] == '0') {
+		ci->fsm.a_bus_req = 0;
+	} else if (buf[0] == '1') {
+		/* If a_bus_drop is TRUE, a_bus_req can't be set */
+		if (ci->fsm.a_bus_drop) {
+			mutex_unlock(&ci->fsm.lock);
+			return count;
+		}
+		ci->fsm.a_bus_req = 1;
+		if (ci->fsm.otg->state == OTG_STATE_A_PERIPHERAL) {
+			ci->gadget.host_request_flag = 1;
+			mutex_unlock(&ci->fsm.lock);
+			return count;
+		}
+	}
+
+	ci_otg_queue_work(ci);
+	mutex_unlock(&ci->fsm.lock);
+
+	return count;
+}
+static DEVICE_ATTR_RW(a_bus_req);
+
+static ssize_t
+a_bus_drop_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	char		*next;
+	unsigned	size, t;
+	struct ci_hdrc	*ci = dev_get_drvdata(dev);
+
+	next = buf;
+	size = PAGE_SIZE;
+	t = scnprintf(next, size, "%d\n", ci->fsm.a_bus_drop);
+	size -= t;
+	next += t;
+
+	return PAGE_SIZE - size;
+}
+
+static ssize_t
+a_bus_drop_store(struct device *dev, struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct ci_hdrc	*ci = dev_get_drvdata(dev);
+
+	if (count > 2)
+		return -1;
+
+	mutex_lock(&ci->fsm.lock);
+	if (buf[0] == '0') {
+		ci->fsm.a_bus_drop = 0;
+	} else if (buf[0] == '1') {
+		ci->fsm.a_bus_drop = 1;
+		ci->fsm.a_bus_req = 0;
+	}
+
+	ci_otg_queue_work(ci);
+	mutex_unlock(&ci->fsm.lock);
+
+	return count;
+}
+static DEVICE_ATTR_RW(a_bus_drop);
+
+static ssize_t
+b_bus_req_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	char		*next;
+	unsigned	size, t;
+	struct ci_hdrc	*ci = dev_get_drvdata(dev);
+
+	next = buf;
+	size = PAGE_SIZE;
+	t = scnprintf(next, size, "%d\n", ci->fsm.b_bus_req);
+	size -= t;
+	next += t;
+
+	return PAGE_SIZE - size;
+}
+
+static ssize_t
+b_bus_req_store(struct device *dev, struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct ci_hdrc	*ci = dev_get_drvdata(dev);
+
+	if (count > 2)
+		return -1;
+
+	mutex_lock(&ci->fsm.lock);
+	if (buf[0] == '0')
+		ci->fsm.b_bus_req = 0;
+	else if (buf[0] == '1') {
+		ci->fsm.b_bus_req = 1;
+		if (ci->fsm.otg->state == OTG_STATE_B_PERIPHERAL) {
+			ci->gadget.host_request_flag = 1;
+			mutex_unlock(&ci->fsm.lock);
+			return count;
+		}
+	}
+
+	ci_otg_queue_work(ci);
+	mutex_unlock(&ci->fsm.lock);
+
+	return count;
+}
+static DEVICE_ATTR_RW(b_bus_req);
+
+static ssize_t
+a_clr_err_store(struct device *dev, struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct ci_hdrc	*ci = dev_get_drvdata(dev);
+
+	if (count > 2)
+		return -1;
+
+	mutex_lock(&ci->fsm.lock);
+	if (buf[0] == '1')
+		ci->fsm.a_clr_err = 1;
+
+	ci_otg_queue_work(ci);
+	mutex_unlock(&ci->fsm.lock);
+
+	return count;
+}
+static DEVICE_ATTR_WO(a_clr_err);
+
+static struct attribute *inputs_attrs[] = {
+	&dev_attr_a_bus_req.attr,
+	&dev_attr_a_bus_drop.attr,
+	&dev_attr_b_bus_req.attr,
+	&dev_attr_a_clr_err.attr,
+	NULL,
+};
+
+static const struct attribute_group inputs_attr_group = {
+	.name = "inputs",
+	.attrs = inputs_attrs,
+};
+
+/*
+ * Keep this list in the same order as timers indexed
+ * by enum otg_fsm_timer in include/linux/usb/otg-fsm.h
+ */
+static unsigned otg_timer_ms[] = {
+	TA_WAIT_VRISE,
+	TA_WAIT_VFALL,
+	TA_WAIT_BCON,
+	TA_AIDL_BDIS,
+	TB_ASE0_BRST,
+	TA_BIDL_ADIS,
+	TB_AIDL_BDIS,
+	TB_SE0_SRP,
+	TB_SRP_FAIL,
+	0,
+	TB_DATA_PLS,
+	TB_SSEND_SRP,
+};
+
+/*
+ * Add timer to active timer list
+ */
+static void ci_otg_add_timer(struct ci_hdrc *ci, enum otg_fsm_timer t)
+{
+	unsigned long flags, timer_sec, timer_nsec;
+
+	if (t >= NUM_OTG_FSM_TIMERS)
+		return;
+
+	spin_lock_irqsave(&ci->lock, flags);
+	timer_sec = otg_timer_ms[t] / MSEC_PER_SEC;
+	timer_nsec = (otg_timer_ms[t] % MSEC_PER_SEC) * NSEC_PER_MSEC;
+	ci->hr_timeouts[t] = ktime_add(ktime_get(),
+				ktime_set(timer_sec, timer_nsec));
+	ci->enabled_otg_timer_bits |= (1 << t);
+	if ((ci->next_otg_timer == NUM_OTG_FSM_TIMERS) ||
+			ktime_after(ci->hr_timeouts[ci->next_otg_timer],
+						ci->hr_timeouts[t])) {
+			ci->next_otg_timer = t;
+			hrtimer_start_range_ns(&ci->otg_fsm_hrtimer,
+					ci->hr_timeouts[t], NSEC_PER_MSEC,
+							HRTIMER_MODE_ABS);
+	}
+	spin_unlock_irqrestore(&ci->lock, flags);
+}
+
+/*
+ * Remove timer from active timer list
+ */
+static void ci_otg_del_timer(struct ci_hdrc *ci, enum otg_fsm_timer t)
+{
+	unsigned long flags, enabled_timer_bits;
+	enum otg_fsm_timer cur_timer, next_timer = NUM_OTG_FSM_TIMERS;
+
+	if ((t >= NUM_OTG_FSM_TIMERS) ||
+			!(ci->enabled_otg_timer_bits & (1 << t)))
+		return;
+
+	spin_lock_irqsave(&ci->lock, flags);
+	ci->enabled_otg_timer_bits &= ~(1 << t);
+	if (ci->next_otg_timer == t) {
+		if (ci->enabled_otg_timer_bits == 0) {
+			spin_unlock_irqrestore(&ci->lock, flags);
+			/* No enabled timers after delete it */
+			hrtimer_cancel(&ci->otg_fsm_hrtimer);
+			spin_lock_irqsave(&ci->lock, flags);
+			ci->next_otg_timer = NUM_OTG_FSM_TIMERS;
+		} else {
+			/* Find the next timer */
+			enabled_timer_bits = ci->enabled_otg_timer_bits;
+			for_each_set_bit(cur_timer, &enabled_timer_bits,
+							NUM_OTG_FSM_TIMERS) {
+				if ((next_timer == NUM_OTG_FSM_TIMERS) ||
+					ktime_before(ci->hr_timeouts[next_timer],
+					 ci->hr_timeouts[cur_timer]))
+					next_timer = cur_timer;
+			}
+		}
+	}
+	if (next_timer != NUM_OTG_FSM_TIMERS) {
+		ci->next_otg_timer = next_timer;
+		hrtimer_start_range_ns(&ci->otg_fsm_hrtimer,
+			ci->hr_timeouts[next_timer], NSEC_PER_MSEC,
+							HRTIMER_MODE_ABS);
+	}
+	spin_unlock_irqrestore(&ci->lock, flags);
+}
+
+/* OTG FSM timer handlers */
+static int a_wait_vrise_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.a_wait_vrise_tmout = 1;
+	return 0;
+}
+
+static int a_wait_vfall_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.a_wait_vfall_tmout = 1;
+	return 0;
+}
+
+static int a_wait_bcon_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.a_wait_bcon_tmout = 1;
+	return 0;
+}
+
+static int a_aidl_bdis_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.a_aidl_bdis_tmout = 1;
+	return 0;
+}
+
+static int b_ase0_brst_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.b_ase0_brst_tmout = 1;
+	return 0;
+}
+
+static int a_bidl_adis_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.a_bidl_adis_tmout = 1;
+	return 0;
+}
+
+static int b_aidl_bdis_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.a_bus_suspend = 1;
+	return 0;
+}
+
+static int b_se0_srp_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.b_se0_srp = 1;
+	return 0;
+}
+
+static int b_srp_fail_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.b_srp_done = 1;
+	return 1;
+}
+
+static int b_data_pls_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.b_srp_done = 1;
+	ci->fsm.b_bus_req = 0;
+	if (ci->fsm.power_up)
+		ci->fsm.power_up = 0;
+	hw_write_otgsc(ci, OTGSC_HABA, 0);
+	pm_runtime_put(ci->dev);
+	return 0;
+}
+
+static int b_ssend_srp_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.b_ssend_srp = 1;
+	/* only vbus fall below B_sess_vld in b_idle state */
+	if (ci->fsm.otg->state == OTG_STATE_B_IDLE)
+		return 0;
+	else
+		return 1;
+}
+
+/*
+ * Keep this list in the same order as timers indexed
+ * by enum otg_fsm_timer in include/linux/usb/otg-fsm.h
+ */
+static int (*otg_timer_handlers[])(struct ci_hdrc *) = {
+	a_wait_vrise_tmout,	/* A_WAIT_VRISE */
+	a_wait_vfall_tmout,	/* A_WAIT_VFALL */
+	a_wait_bcon_tmout,	/* A_WAIT_BCON */
+	a_aidl_bdis_tmout,	/* A_AIDL_BDIS */
+	b_ase0_brst_tmout,	/* B_ASE0_BRST */
+	a_bidl_adis_tmout,	/* A_BIDL_ADIS */
+	b_aidl_bdis_tmout,	/* B_AIDL_BDIS */
+	b_se0_srp_tmout,	/* B_SE0_SRP */
+	b_srp_fail_tmout,	/* B_SRP_FAIL */
+	NULL,			/* A_WAIT_ENUM */
+	b_data_pls_tmout,	/* B_DATA_PLS */
+	b_ssend_srp_tmout,	/* B_SSEND_SRP */
+};
+
+/*
+ * Enable the next nearest enabled timer if have
+ */
+static enum hrtimer_restart ci_otg_hrtimer_func(struct hrtimer *t)
+{
+	struct ci_hdrc *ci = container_of(t, struct ci_hdrc, otg_fsm_hrtimer);
+	ktime_t	now, *timeout;
+	unsigned long   enabled_timer_bits;
+	unsigned long   flags;
+	enum otg_fsm_timer cur_timer, next_timer = NUM_OTG_FSM_TIMERS;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&ci->lock, flags);
+	enabled_timer_bits = ci->enabled_otg_timer_bits;
+	ci->next_otg_timer = NUM_OTG_FSM_TIMERS;
+
+	now = ktime_get();
+	for_each_set_bit(cur_timer, &enabled_timer_bits, NUM_OTG_FSM_TIMERS) {
+		if (ktime_compare(now, ci->hr_timeouts[cur_timer]) >= 0) {
+			ci->enabled_otg_timer_bits &= ~(1 << cur_timer);
+			if (otg_timer_handlers[cur_timer])
+				ret = otg_timer_handlers[cur_timer](ci);
+		} else {
+			if ((next_timer == NUM_OTG_FSM_TIMERS) ||
+				ktime_before(ci->hr_timeouts[cur_timer],
+					ci->hr_timeouts[next_timer]))
+				next_timer = cur_timer;
+		}
+	}
+	/* Enable the next nearest timer */
+	if (next_timer < NUM_OTG_FSM_TIMERS) {
+		timeout = &ci->hr_timeouts[next_timer];
+		hrtimer_start_range_ns(&ci->otg_fsm_hrtimer, *timeout,
+					NSEC_PER_MSEC, HRTIMER_MODE_ABS);
+		ci->next_otg_timer = next_timer;
+	}
+	spin_unlock_irqrestore(&ci->lock, flags);
+
+	if (!ret)
+		ci_otg_queue_work(ci);
+
+	return HRTIMER_NORESTART;
+}
+
+/* Initialize timers */
+static int ci_otg_init_timers(struct ci_hdrc *ci)
+{
+	hrtimer_init(&ci->otg_fsm_hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+	ci->otg_fsm_hrtimer.function = ci_otg_hrtimer_func;
+
+	return 0;
+}
+
+/* -------------------------------------------------------------*/
+/* Operations that will be called from OTG Finite State Machine */
+/* -------------------------------------------------------------*/
+static void ci_otg_fsm_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
+{
+	struct ci_hdrc	*ci = container_of(fsm, struct ci_hdrc, fsm);
+
+	if (t < NUM_OTG_FSM_TIMERS)
+		ci_otg_add_timer(ci, t);
+	return;
+}
+
+static void ci_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
+{
+	struct ci_hdrc	*ci = container_of(fsm, struct ci_hdrc, fsm);
+
+	if (t < NUM_OTG_FSM_TIMERS)
+		ci_otg_del_timer(ci, t);
+	return;
+}
+
+/*
+ * A-device drive vbus: turn on vbus regulator and enable port power
+ * Data pulse irq should be disabled while vbus is on.
+ */
+static void ci_otg_drv_vbus(struct otg_fsm *fsm, int on)
+{
+	int ret;
+	struct ci_hdrc	*ci = container_of(fsm, struct ci_hdrc, fsm);
+
+	if (on) {
+		/* Enable power */
+		hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP,
+							PORTSC_PP);
+		if (ci->platdata->reg_vbus) {
+			ret = regulator_enable(ci->platdata->reg_vbus);
+			if (ret) {
+				dev_err(ci->dev,
+				"Failed to enable vbus regulator, ret=%d\n",
+				ret);
+				return;
+			}
+		}
+
+		if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL)
+			usb_phy_vbus_on(ci->usb_phy);
+
+		/* Disable data pulse irq */
+		hw_write_otgsc(ci, OTGSC_DPIE, 0);
+
+		fsm->a_srp_det = 0;
+		fsm->power_up = 0;
+	} else {
+		if (ci->platdata->reg_vbus)
+			regulator_disable(ci->platdata->reg_vbus);
+
+		if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL)
+			usb_phy_vbus_off(ci->usb_phy);
+
+		fsm->a_bus_drop = 1;
+		fsm->a_bus_req = 0;
+	}
+}
+
+/*
+ * Control data line by Run Stop bit.
+ */
+static void ci_otg_loc_conn(struct otg_fsm *fsm, int on)
+{
+	struct ci_hdrc	*ci = container_of(fsm, struct ci_hdrc, fsm);
+
+	if (on)
+		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
+	else
+		hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+}
+
+/*
+ * Generate SOF by host.
+ * In host mode, controller will automatically send SOF.
+ * Suspend will block the data on the port.
+ *
+ * This is controlled through usbcore by usb autosuspend,
+ * so the usb device class driver need support autosuspend,
+ * otherwise the bus suspend will not happen.
+ */
+static void ci_otg_loc_sof(struct otg_fsm *fsm, int on)
+{
+	struct usb_device *udev;
+
+	if (!fsm->otg->host)
+		return;
+
+	udev = usb_hub_find_child(fsm->otg->host->root_hub, 1);
+	if (!udev)
+		return;
+
+	if (on) {
+		usb_disable_autosuspend(udev);
+	} else {
+		pm_runtime_set_autosuspend_delay(&udev->dev, 0);
+		usb_enable_autosuspend(udev);
+	}
+}
+
+/*
+ * Start SRP pulsing by data-line pulsing,
+ * no v-bus pulsing followed
+ */
+static void ci_otg_start_pulse(struct otg_fsm *fsm)
+{
+	struct ci_hdrc	*ci = container_of(fsm, struct ci_hdrc, fsm);
+
+	/* Hardware Assistant Data pulse */
+	hw_write_otgsc(ci, OTGSC_HADP, OTGSC_HADP);
+
+	pm_runtime_get(ci->dev);
+	ci_otg_add_timer(ci, B_DATA_PLS);
+}
+
+static int ci_otg_start_host(struct otg_fsm *fsm, int on)
+{
+	struct ci_hdrc	*ci = container_of(fsm, struct ci_hdrc, fsm);
+
+	if (on) {
+		ci_role_stop(ci);
+		ci_role_start(ci, CI_ROLE_HOST);
+	} else {
+		ci_role_stop(ci);
+		ci_role_start(ci, CI_ROLE_GADGET);
+	}
+	return 0;
+}
+
+static int ci_otg_start_gadget(struct otg_fsm *fsm, int on)
+{
+	struct ci_hdrc	*ci = container_of(fsm, struct ci_hdrc, fsm);
+
+	if (on)
+		usb_gadget_vbus_connect(&ci->gadget);
+	else
+		usb_gadget_vbus_disconnect(&ci->gadget);
+
+	return 0;
+}
+
+static struct otg_fsm_ops ci_otg_ops = {
+	.drv_vbus = ci_otg_drv_vbus,
+	.loc_conn = ci_otg_loc_conn,
+	.loc_sof = ci_otg_loc_sof,
+	.start_pulse = ci_otg_start_pulse,
+	.add_timer = ci_otg_fsm_add_timer,
+	.del_timer = ci_otg_fsm_del_timer,
+	.start_host = ci_otg_start_host,
+	.start_gadget = ci_otg_start_gadget,
+};
+
+int ci_otg_fsm_work(struct ci_hdrc *ci)
+{
+	/*
+	 * Don't do fsm transition for B device
+	 * when there is no gadget class driver
+	 */
+	if (ci->fsm.id && !(ci->driver) &&
+		ci->fsm.otg->state < OTG_STATE_A_IDLE)
+		return 0;
+
+	pm_runtime_get_sync(ci->dev);
+	if (otg_statemachine(&ci->fsm)) {
+		if (ci->fsm.otg->state == OTG_STATE_A_IDLE) {
+			/*
+			 * Further state change for cases:
+			 * a_idle to b_idle; or
+			 * a_idle to a_wait_vrise due to ID change(1->0), so
+			 * B-dev becomes A-dev can try to start new session
+			 * consequently; or
+			 * a_idle to a_wait_vrise when power up
+			 */
+			if ((ci->fsm.id) || (ci->id_event) ||
+						(ci->fsm.power_up)) {
+				ci_otg_queue_work(ci);
+			} else {
+				/* Enable data pulse irq */
+				hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS |
+								PORTSC_PP, 0);
+				hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS);
+				hw_write_otgsc(ci, OTGSC_DPIE, OTGSC_DPIE);
+			}
+			if (ci->id_event)
+				ci->id_event = false;
+		} else if (ci->fsm.otg->state == OTG_STATE_B_IDLE) {
+			if (ci->fsm.b_sess_vld) {
+				ci->fsm.power_up = 0;
+				/*
+				 * Further transite to b_periphearl state
+				 * when register gadget driver with vbus on
+				 */
+				ci_otg_queue_work(ci);
+			}
+		} else if (ci->fsm.otg->state == OTG_STATE_A_HOST) {
+			pm_runtime_mark_last_busy(ci->dev);
+			pm_runtime_put_autosuspend(ci->dev);
+			return 0;
+		}
+	}
+	pm_runtime_put_sync(ci->dev);
+	return 0;
+}
+
+/*
+ * Update fsm variables in each state if catching expected interrupts,
+ * called by otg fsm isr.
+ */
+static void ci_otg_fsm_event(struct ci_hdrc *ci)
+{
+	u32 intr_sts, otg_bsess_vld, port_conn;
+	struct otg_fsm *fsm = &ci->fsm;
+
+	intr_sts = hw_read_intr_status(ci);
+	otg_bsess_vld = hw_read_otgsc(ci, OTGSC_BSV);
+	port_conn = hw_read(ci, OP_PORTSC, PORTSC_CCS);
+
+	switch (ci->fsm.otg->state) {
+	case OTG_STATE_A_WAIT_BCON:
+		if (port_conn) {
+			fsm->b_conn = 1;
+			fsm->a_bus_req = 1;
+			ci_otg_queue_work(ci);
+		}
+		break;
+	case OTG_STATE_B_IDLE:
+		if (otg_bsess_vld && (intr_sts & USBi_PCI) && port_conn) {
+			fsm->b_sess_vld = 1;
+			ci_otg_queue_work(ci);
+		}
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		if ((intr_sts & USBi_SLI) && port_conn && otg_bsess_vld) {
+			ci_otg_add_timer(ci, B_AIDL_BDIS);
+		} else if (intr_sts & USBi_PCI) {
+			ci_otg_del_timer(ci, B_AIDL_BDIS);
+			if (fsm->a_bus_suspend == 1)
+				fsm->a_bus_suspend = 0;
+		}
+		break;
+	case OTG_STATE_B_HOST:
+		if ((intr_sts & USBi_PCI) && !port_conn) {
+			fsm->a_conn = 0;
+			fsm->b_bus_req = 0;
+			ci_otg_queue_work(ci);
+		}
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		if (intr_sts & USBi_SLI) {
+			 fsm->b_bus_suspend = 1;
+			/*
+			 * Init a timer to know how long this suspend
+			 * will continue, if time out, indicates B no longer
+			 * wants to be host role
+			 */
+			 ci_otg_add_timer(ci, A_BIDL_ADIS);
+		}
+
+		if (intr_sts & USBi_URI)
+			ci_otg_del_timer(ci, A_BIDL_ADIS);
+
+		if (intr_sts & USBi_PCI) {
+			if (fsm->b_bus_suspend == 1) {
+				ci_otg_del_timer(ci, A_BIDL_ADIS);
+				fsm->b_bus_suspend = 0;
+			}
+		}
+		break;
+	case OTG_STATE_A_SUSPEND:
+		if ((intr_sts & USBi_PCI) && !port_conn) {
+			fsm->b_conn = 0;
+
+			/* if gadget driver is binded */
+			if (ci->driver) {
+				/* A device to be peripheral mode */
+				ci->gadget.is_a_peripheral = 1;
+			}
+			ci_otg_queue_work(ci);
+		}
+		break;
+	case OTG_STATE_A_HOST:
+		if ((intr_sts & USBi_PCI) && !port_conn) {
+			fsm->b_conn = 0;
+			ci_otg_queue_work(ci);
+		}
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+		if ((intr_sts & USBi_PCI) && port_conn) {
+			fsm->a_conn = 1;
+			ci_otg_queue_work(ci);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+/*
+ * ci_otg_irq - otg fsm related irq handling
+ * and also update otg fsm variable by monitoring usb host and udc
+ * state change interrupts.
+ * @ci: ci_hdrc
+ */
+irqreturn_t ci_otg_fsm_irq(struct ci_hdrc *ci)
+{
+	irqreturn_t retval =  IRQ_NONE;
+	u32 otgsc, otg_int_src = 0;
+	struct otg_fsm *fsm = &ci->fsm;
+
+	otgsc = hw_read_otgsc(ci, ~0);
+	otg_int_src = otgsc & OTGSC_INT_STATUS_BITS & (otgsc >> 8);
+	fsm->id = (otgsc & OTGSC_ID) ? 1 : 0;
+
+	if (otg_int_src) {
+		if (otg_int_src & OTGSC_DPIS) {
+			hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS);
+			fsm->a_srp_det = 1;
+			fsm->a_bus_drop = 0;
+		} else if (otg_int_src & OTGSC_IDIS) {
+			hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS);
+			if (fsm->id == 0) {
+				fsm->a_bus_drop = 0;
+				fsm->a_bus_req = 1;
+				ci->id_event = true;
+			}
+		} else if (otg_int_src & OTGSC_BSVIS) {
+			hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS);
+			if (otgsc & OTGSC_BSV) {
+				fsm->b_sess_vld = 1;
+				ci_otg_del_timer(ci, B_SSEND_SRP);
+				ci_otg_del_timer(ci, B_SRP_FAIL);
+				fsm->b_ssend_srp = 0;
+			} else {
+				fsm->b_sess_vld = 0;
+				if (fsm->id)
+					ci_otg_add_timer(ci, B_SSEND_SRP);
+			}
+		} else if (otg_int_src & OTGSC_AVVIS) {
+			hw_write_otgsc(ci, OTGSC_AVVIS, OTGSC_AVVIS);
+			if (otgsc & OTGSC_AVV) {
+				fsm->a_vbus_vld = 1;
+			} else {
+				fsm->a_vbus_vld = 0;
+				fsm->b_conn = 0;
+			}
+		}
+		ci_otg_queue_work(ci);
+		return IRQ_HANDLED;
+	}
+
+	ci_otg_fsm_event(ci);
+
+	return retval;
+}
+
+void ci_hdrc_otg_fsm_start(struct ci_hdrc *ci)
+{
+	ci_otg_queue_work(ci);
+}
+
+int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci)
+{
+	int retval = 0;
+
+	if (ci->phy)
+		ci->otg.phy = ci->phy;
+	else
+		ci->otg.usb_phy = ci->usb_phy;
+
+	ci->otg.gadget = &ci->gadget;
+	ci->fsm.otg = &ci->otg;
+	ci->fsm.power_up = 1;
+	ci->fsm.id = hw_read_otgsc(ci, OTGSC_ID) ? 1 : 0;
+	ci->fsm.otg->state = OTG_STATE_UNDEFINED;
+	ci->fsm.ops = &ci_otg_ops;
+	ci->gadget.hnp_polling_support = 1;
+	ci->fsm.host_req_flag = devm_kzalloc(ci->dev, 1, GFP_KERNEL);
+	if (!ci->fsm.host_req_flag)
+		return -ENOMEM;
+
+	mutex_init(&ci->fsm.lock);
+
+	retval = ci_otg_init_timers(ci);
+	if (retval) {
+		dev_err(ci->dev, "Couldn't init OTG timers\n");
+		return retval;
+	}
+	ci->enabled_otg_timer_bits = 0;
+	ci->next_otg_timer = NUM_OTG_FSM_TIMERS;
+
+	retval = sysfs_create_group(&ci->dev->kobj, &inputs_attr_group);
+	if (retval < 0) {
+		dev_dbg(ci->dev,
+			"Can't register sysfs attr group: %d\n", retval);
+		return retval;
+	}
+
+	/* Enable A vbus valid irq */
+	hw_write_otgsc(ci, OTGSC_AVVIE, OTGSC_AVVIE);
+
+	if (ci->fsm.id) {
+		ci->fsm.b_ssend_srp =
+			hw_read_otgsc(ci, OTGSC_BSV) ? 0 : 1;
+		ci->fsm.b_sess_vld =
+			hw_read_otgsc(ci, OTGSC_BSV) ? 1 : 0;
+		/* Enable BSV irq */
+		hw_write_otgsc(ci, OTGSC_BSVIE, OTGSC_BSVIE);
+	}
+
+	return 0;
+}
+
+void ci_hdrc_otg_fsm_remove(struct ci_hdrc *ci)
+{
+	sysfs_remove_group(&ci->dev->kobj, &inputs_attr_group);
+}
diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h
new file mode 100644
index 000000000..1f5c5ae0e
--- /dev/null
+++ b/drivers/usb/chipidea/otg_fsm.h
@@ -0,0 +1,101 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * Author: Jun Li
+ */
+
+#ifndef __DRIVERS_USB_CHIPIDEA_OTG_FSM_H
+#define __DRIVERS_USB_CHIPIDEA_OTG_FSM_H
+
+#include <linux/usb/otg-fsm.h>
+
+/*
+ *  A-DEVICE timing  constants
+ */
+
+/* Wait for VBUS Rise  */
+#define TA_WAIT_VRISE        (100)	/* a_wait_vrise: section 7.1.2
+					 * a_wait_vrise_tmr: section 7.4.5.1
+					 * TA_VBUS_RISE <= 100ms, section 4.4
+					 * Table 4-1: Electrical Characteristics
+					 * ->DC Electrical Timing
+					 */
+/* Wait for VBUS Fall  */
+#define TA_WAIT_VFALL        (1000)	/* a_wait_vfall: section 7.1.7
+					 * a_wait_vfall_tmr: section: 7.4.5.2
+					 */
+/* Wait for B-Connect */
+#define TA_WAIT_BCON         (10000)	/* a_wait_bcon: section 7.1.3
+					 * TA_WAIT_BCON: should be between 1100
+					 * and 30000 ms, section 5.5, Table 5-1
+					 */
+/* A-Idle to B-Disconnect */
+#define TA_AIDL_BDIS         (5000)	/* a_suspend min 200 ms, section 5.2.1
+					 * TA_AIDL_BDIS: section 5.5, Table 5-1
+					 */
+/* B-Idle to A-Disconnect */
+#define TA_BIDL_ADIS         (500)	/* TA_BIDL_ADIS: section 5.2.1
+					 * 500ms is used for B switch to host
+					 * for safe
+					 */
+
+/*
+ * B-device timing constants
+ */
+
+/* Data-Line Pulse Time*/
+#define TB_DATA_PLS          (10)	/* b_srp_init,continue 5~10ms
+					 * section:5.1.3
+					 */
+/* SRP Fail Time  */
+#define TB_SRP_FAIL          (6000)	/* b_srp_init,fail time 5~6s
+					 * section:5.1.6
+					 */
+/* A-SE0 to B-Reset  */
+#define TB_ASE0_BRST         (155)	/* minimum 155 ms, section:5.3.1 */
+/* SE0 Time Before SRP */
+#define TB_SE0_SRP           (1000)	/* b_idle,minimum 1s, section:5.1.2 */
+/* SSEND time before SRP */
+#define TB_SSEND_SRP         (1500)	/* minimum 1.5 sec, section:5.1.2 */
+
+#define TB_AIDL_BDIS         (20)	/* 4ms ~ 150ms, section 5.2.1 */
+
+#if IS_ENABLED(CONFIG_USB_OTG_FSM)
+
+int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci);
+int ci_otg_fsm_work(struct ci_hdrc *ci);
+irqreturn_t ci_otg_fsm_irq(struct ci_hdrc *ci);
+void ci_hdrc_otg_fsm_start(struct ci_hdrc *ci);
+void ci_hdrc_otg_fsm_remove(struct ci_hdrc *ci);
+
+#else
+
+static inline int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci)
+{
+	return 0;
+}
+
+static inline int ci_otg_fsm_work(struct ci_hdrc *ci)
+{
+	return -ENXIO;
+}
+
+static inline irqreturn_t ci_otg_fsm_irq(struct ci_hdrc *ci)
+{
+	return IRQ_NONE;
+}
+
+static inline void ci_hdrc_otg_fsm_start(struct ci_hdrc *ci)
+{
+
+}
+
+static inline void ci_hdrc_otg_fsm_remove(struct ci_hdrc *ci)
+{
+
+}
+
+#endif
+
+#endif /* __DRIVERS_USB_CHIPIDEA_OTG_FSM_H */
diff --git a/drivers/usb/chipidea/trace.c b/drivers/usb/chipidea/trace.c
new file mode 100644
index 000000000..f6402630a
--- /dev/null
+++ b/drivers/usb/chipidea/trace.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Chipidea Device Mode Trace Support
+ *
+ * Copyright (C) 2020 NXP
+ *
+ * Author: Peter Chen <peter.chen@nxp.com>
+ */
+
+#define CREATE_TRACE_POINTS
+#include "trace.h"
+
+void ci_log(struct ci_hdrc *ci, const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+
+	va_start(args, fmt);
+	vaf.fmt = fmt;
+	vaf.va = &args;
+	trace_ci_log(ci, &vaf);
+	va_end(args);
+}
diff --git a/drivers/usb/chipidea/trace.h b/drivers/usb/chipidea/trace.h
new file mode 100644
index 000000000..ca0e65b48
--- /dev/null
+++ b/drivers/usb/chipidea/trace.h
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Trace support header file for device mode
+ *
+ * Copyright (C) 2020 NXP
+ *
+ * Author: Peter Chen <peter.chen@nxp.com>
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM chipidea
+
+#if !defined(__LINUX_CHIPIDEA_TRACE) || defined(TRACE_HEADER_MULTI_READ)
+#define __LINUX_CHIPIDEA_TRACE
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+#include <linux/usb/chipidea.h>
+#include "ci.h"
+#include "udc.h"
+
+#define CHIPIDEA_MSG_MAX	500
+
+void ci_log(struct ci_hdrc *ci, const char *fmt, ...);
+
+TRACE_EVENT(ci_log,
+	TP_PROTO(struct ci_hdrc *ci, struct va_format *vaf),
+	TP_ARGS(ci, vaf),
+	TP_STRUCT__entry(
+		__string(name, dev_name(ci->dev))
+		__vstring(msg, vaf->fmt, vaf->va)
+	),
+	TP_fast_assign(
+		__assign_str(name, dev_name(ci->dev));
+		__assign_vstr(msg, vaf->fmt, vaf->va);
+	),
+	TP_printk("%s: %s", __get_str(name), __get_str(msg))
+);
+
+DECLARE_EVENT_CLASS(ci_log_trb,
+	TP_PROTO(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq, struct td_node *td),
+	TP_ARGS(hwep, hwreq, td),
+	TP_STRUCT__entry(
+		__string(name, hwep->name)
+		__field(struct td_node *, td)
+		__field(struct usb_request *, req)
+		__field(dma_addr_t, dma)
+		__field(s32, td_remaining_size)
+		__field(u32, next)
+		__field(u32, token)
+		__field(u32, type)
+	),
+	TP_fast_assign(
+		__assign_str(name, hwep->name);
+		__entry->req = &hwreq->req;
+		__entry->td = td;
+		__entry->dma = td->dma;
+		__entry->td_remaining_size = td->td_remaining_size;
+		__entry->next = le32_to_cpu(td->ptr->next);
+		__entry->token = le32_to_cpu(td->ptr->token);
+		__entry->type = usb_endpoint_type(hwep->ep.desc);
+	),
+	TP_printk("%s: req: %p, td: %p, td_dma_address: %pad, remaining_size: %d, "
+	       "next: %x, total bytes: %d, status: %lx",
+		__get_str(name), __entry->req, __entry->td, &__entry->dma,
+		__entry->td_remaining_size, __entry->next,
+		(int)((__entry->token & TD_TOTAL_BYTES) >> __ffs(TD_TOTAL_BYTES)),
+		__entry->token & TD_STATUS
+	)
+);
+
+DEFINE_EVENT(ci_log_trb, ci_prepare_td,
+	TP_PROTO(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq, struct td_node *td),
+	TP_ARGS(hwep, hwreq, td)
+);
+
+DEFINE_EVENT(ci_log_trb, ci_complete_td,
+	TP_PROTO(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq, struct td_node *td),
+	TP_ARGS(hwep, hwreq, td)
+);
+
+#endif /* __LINUX_CHIPIDEA_TRACE */
+
+/* this part must be outside header guard */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
new file mode 100644
index 000000000..8c3e3a635
--- /dev/null
+++ b/drivers/usb/chipidea/udc.c
@@ -0,0 +1,2212 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * udc.c - ChipIdea UDC driver
+ *
+ * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ *
+ * Author: David Lopo
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/err.h>
+#include <linux/irqreturn.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg-fsm.h>
+#include <linux/usb/chipidea.h>
+
+#include "ci.h"
+#include "udc.h"
+#include "bits.h"
+#include "otg.h"
+#include "otg_fsm.h"
+#include "trace.h"
+
+/* control endpoint description */
+static const struct usb_endpoint_descriptor
+ctrl_endpt_out_desc = {
+	.bLength         = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bEndpointAddress = USB_DIR_OUT,
+	.bmAttributes    = USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
+};
+
+static const struct usb_endpoint_descriptor
+ctrl_endpt_in_desc = {
+	.bLength         = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bEndpointAddress = USB_DIR_IN,
+	.bmAttributes    = USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
+};
+
+static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
+		       struct td_node *node);
+/**
+ * hw_ep_bit: calculates the bit number
+ * @num: endpoint number
+ * @dir: endpoint direction
+ *
+ * This function returns bit number
+ */
+static inline int hw_ep_bit(int num, int dir)
+{
+	return num + ((dir == TX) ? 16 : 0);
+}
+
+static inline int ep_to_bit(struct ci_hdrc *ci, int n)
+{
+	int fill = 16 - ci->hw_ep_max / 2;
+
+	if (n >= ci->hw_ep_max / 2)
+		n += fill;
+
+	return n;
+}
+
+/**
+ * hw_device_state: enables/disables interrupts (execute without interruption)
+ * @ci: the controller
+ * @dma: 0 => disable, !0 => enable and set dma engine
+ *
+ * This function returns an error code
+ */
+static int hw_device_state(struct ci_hdrc *ci, u32 dma)
+{
+	if (dma) {
+		hw_write(ci, OP_ENDPTLISTADDR, ~0, dma);
+		/* interrupt, error, port change, reset, sleep/suspend */
+		hw_write(ci, OP_USBINTR, ~0,
+			     USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
+	} else {
+		hw_write(ci, OP_USBINTR, ~0, 0);
+	}
+	return 0;
+}
+
+/**
+ * hw_ep_flush: flush endpoint fifo (execute without interruption)
+ * @ci: the controller
+ * @num: endpoint number
+ * @dir: endpoint direction
+ *
+ * This function returns an error code
+ */
+static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir)
+{
+	int n = hw_ep_bit(num, dir);
+
+	do {
+		/* flush any pending transfer */
+		hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n));
+		while (hw_read(ci, OP_ENDPTFLUSH, BIT(n)))
+			cpu_relax();
+	} while (hw_read(ci, OP_ENDPTSTAT, BIT(n)));
+
+	return 0;
+}
+
+/**
+ * hw_ep_disable: disables endpoint (execute without interruption)
+ * @ci: the controller
+ * @num: endpoint number
+ * @dir: endpoint direction
+ *
+ * This function returns an error code
+ */
+static int hw_ep_disable(struct ci_hdrc *ci, int num, int dir)
+{
+	hw_write(ci, OP_ENDPTCTRL + num,
+		 (dir == TX) ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
+	return 0;
+}
+
+/**
+ * hw_ep_enable: enables endpoint (execute without interruption)
+ * @ci: the controller
+ * @num:  endpoint number
+ * @dir:  endpoint direction
+ * @type: endpoint type
+ *
+ * This function returns an error code
+ */
+static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type)
+{
+	u32 mask, data;
+
+	if (dir == TX) {
+		mask  = ENDPTCTRL_TXT;  /* type    */
+		data  = type << __ffs(mask);
+
+		mask |= ENDPTCTRL_TXS;  /* unstall */
+		mask |= ENDPTCTRL_TXR;  /* reset data toggle */
+		data |= ENDPTCTRL_TXR;
+		mask |= ENDPTCTRL_TXE;  /* enable  */
+		data |= ENDPTCTRL_TXE;
+	} else {
+		mask  = ENDPTCTRL_RXT;  /* type    */
+		data  = type << __ffs(mask);
+
+		mask |= ENDPTCTRL_RXS;  /* unstall */
+		mask |= ENDPTCTRL_RXR;  /* reset data toggle */
+		data |= ENDPTCTRL_RXR;
+		mask |= ENDPTCTRL_RXE;  /* enable  */
+		data |= ENDPTCTRL_RXE;
+	}
+	hw_write(ci, OP_ENDPTCTRL + num, mask, data);
+	return 0;
+}
+
+/**
+ * hw_ep_get_halt: return endpoint halt status
+ * @ci: the controller
+ * @num: endpoint number
+ * @dir: endpoint direction
+ *
+ * This function returns 1 if endpoint halted
+ */
+static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir)
+{
+	u32 mask = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
+
+	return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0;
+}
+
+/**
+ * hw_ep_prime: primes endpoint (execute without interruption)
+ * @ci: the controller
+ * @num:     endpoint number
+ * @dir:     endpoint direction
+ * @is_ctrl: true if control endpoint
+ *
+ * This function returns an error code
+ */
+static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl)
+{
+	int n = hw_ep_bit(num, dir);
+
+	/* Synchronize before ep prime */
+	wmb();
+
+	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
+		return -EAGAIN;
+
+	hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n));
+
+	while (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
+		cpu_relax();
+	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
+		return -EAGAIN;
+
+	/* status shoult be tested according with manual but it doesn't work */
+	return 0;
+}
+
+/**
+ * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute
+ *                 without interruption)
+ * @ci: the controller
+ * @num:   endpoint number
+ * @dir:   endpoint direction
+ * @value: true => stall, false => unstall
+ *
+ * This function returns an error code
+ */
+static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value)
+{
+	if (value != 0 && value != 1)
+		return -EINVAL;
+
+	do {
+		enum ci_hw_regs reg = OP_ENDPTCTRL + num;
+		u32 mask_xs = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
+		u32 mask_xr = (dir == TX) ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
+
+		/* data toggle - reserved for EP0 but it's in ESS */
+		hw_write(ci, reg, mask_xs|mask_xr,
+			  value ? mask_xs : mask_xr);
+	} while (value != hw_ep_get_halt(ci, num, dir));
+
+	return 0;
+}
+
+/**
+ * hw_port_is_high_speed: test if port is high speed
+ * @ci: the controller
+ *
+ * This function returns true if high speed port
+ */
+static int hw_port_is_high_speed(struct ci_hdrc *ci)
+{
+	return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) :
+		hw_read(ci, OP_PORTSC, PORTSC_HSP);
+}
+
+/**
+ * hw_test_and_clear_complete: test & clear complete status (execute without
+ *                             interruption)
+ * @ci: the controller
+ * @n: endpoint number
+ *
+ * This function returns complete status
+ */
+static int hw_test_and_clear_complete(struct ci_hdrc *ci, int n)
+{
+	n = ep_to_bit(ci, n);
+	return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n));
+}
+
+/**
+ * hw_test_and_clear_intr_active: test & clear active interrupts (execute
+ *                                without interruption)
+ * @ci: the controller
+ *
+ * This function returns active interrutps
+ */
+static u32 hw_test_and_clear_intr_active(struct ci_hdrc *ci)
+{
+	u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci);
+
+	hw_write(ci, OP_USBSTS, ~0, reg);
+	return reg;
+}
+
+/**
+ * hw_test_and_clear_setup_guard: test & clear setup guard (execute without
+ *                                interruption)
+ * @ci: the controller
+ *
+ * This function returns guard value
+ */
+static int hw_test_and_clear_setup_guard(struct ci_hdrc *ci)
+{
+	return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0);
+}
+
+/**
+ * hw_test_and_set_setup_guard: test & set setup guard (execute without
+ *                              interruption)
+ * @ci: the controller
+ *
+ * This function returns guard value
+ */
+static int hw_test_and_set_setup_guard(struct ci_hdrc *ci)
+{
+	return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
+}
+
+/**
+ * hw_usb_set_address: configures USB address (execute without interruption)
+ * @ci: the controller
+ * @value: new USB address
+ *
+ * This function explicitly sets the address, without the "USBADRA" (advance)
+ * feature, which is not supported by older versions of the controller.
+ */
+static void hw_usb_set_address(struct ci_hdrc *ci, u8 value)
+{
+	hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR,
+		 value << __ffs(DEVICEADDR_USBADR));
+}
+
+/**
+ * hw_usb_reset: restart device after a bus reset (execute without
+ *               interruption)
+ * @ci: the controller
+ *
+ * This function returns an error code
+ */
+static int hw_usb_reset(struct ci_hdrc *ci)
+{
+	hw_usb_set_address(ci, 0);
+
+	/* ESS flushes only at end?!? */
+	hw_write(ci, OP_ENDPTFLUSH,    ~0, ~0);
+
+	/* clear setup token semaphores */
+	hw_write(ci, OP_ENDPTSETUPSTAT, 0,  0);
+
+	/* clear complete status */
+	hw_write(ci, OP_ENDPTCOMPLETE,  0,  0);
+
+	/* wait until all bits cleared */
+	while (hw_read(ci, OP_ENDPTPRIME, ~0))
+		udelay(10);             /* not RTOS friendly */
+
+	/* reset all endpoints ? */
+
+	/* reset internal status and wait for further instructions
+	   no need to verify the port reset status (ESS does it) */
+
+	return 0;
+}
+
+/******************************************************************************
+ * UTIL block
+ *****************************************************************************/
+
+static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
+			unsigned int length, struct scatterlist *s)
+{
+	int i;
+	u32 temp;
+	struct td_node *lastnode, *node = kzalloc(sizeof(struct td_node),
+						  GFP_ATOMIC);
+
+	if (node == NULL)
+		return -ENOMEM;
+
+	node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC, &node->dma);
+	if (node->ptr == NULL) {
+		kfree(node);
+		return -ENOMEM;
+	}
+
+	node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
+	node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
+	node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
+	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) {
+		u32 mul = hwreq->req.length / hwep->ep.maxpacket;
+
+		if (hwreq->req.length == 0
+				|| hwreq->req.length % hwep->ep.maxpacket)
+			mul++;
+		node->ptr->token |= cpu_to_le32(mul << __ffs(TD_MULTO));
+	}
+
+	if (s) {
+		temp = (u32) (sg_dma_address(s) + hwreq->req.actual);
+		node->td_remaining_size = CI_MAX_BUF_SIZE - length;
+	} else {
+		temp = (u32) (hwreq->req.dma + hwreq->req.actual);
+	}
+
+	if (length) {
+		node->ptr->page[0] = cpu_to_le32(temp);
+		for (i = 1; i < TD_PAGE_COUNT; i++) {
+			u32 page = temp + i * CI_HDRC_PAGE_SIZE;
+			page &= ~TD_RESERVED_MASK;
+			node->ptr->page[i] = cpu_to_le32(page);
+		}
+	}
+
+	hwreq->req.actual += length;
+
+	if (!list_empty(&hwreq->tds)) {
+		/* get the last entry */
+		lastnode = list_entry(hwreq->tds.prev,
+				struct td_node, td);
+		lastnode->ptr->next = cpu_to_le32(node->dma);
+	}
+
+	INIT_LIST_HEAD(&node->td);
+	list_add_tail(&node->td, &hwreq->tds);
+
+	return 0;
+}
+
+/**
+ * _usb_addr: calculates endpoint address from direction & number
+ * @ep:  endpoint
+ */
+static inline u8 _usb_addr(struct ci_hw_ep *ep)
+{
+	return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num;
+}
+
+static int prepare_td_for_non_sg(struct ci_hw_ep *hwep,
+		struct ci_hw_req *hwreq)
+{
+	unsigned int rest = hwreq->req.length;
+	int pages = TD_PAGE_COUNT;
+	int ret = 0;
+
+	if (rest == 0) {
+		ret = add_td_to_list(hwep, hwreq, 0, NULL);
+		if (ret < 0)
+			return ret;
+	}
+
+	/*
+	 * The first buffer could be not page aligned.
+	 * In that case we have to span into one extra td.
+	 */
+	if (hwreq->req.dma % PAGE_SIZE)
+		pages--;
+
+	while (rest > 0) {
+		unsigned int count = min(hwreq->req.length - hwreq->req.actual,
+			(unsigned int)(pages * CI_HDRC_PAGE_SIZE));
+
+		ret = add_td_to_list(hwep, hwreq, count, NULL);
+		if (ret < 0)
+			return ret;
+
+		rest -= count;
+	}
+
+	if (hwreq->req.zero && hwreq->req.length && hwep->dir == TX
+	    && (hwreq->req.length % hwep->ep.maxpacket == 0)) {
+		ret = add_td_to_list(hwep, hwreq, 0, NULL);
+		if (ret < 0)
+			return ret;
+	}
+
+	return ret;
+}
+
+static int prepare_td_per_sg(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
+		struct scatterlist *s)
+{
+	unsigned int rest = sg_dma_len(s);
+	int ret = 0;
+
+	hwreq->req.actual = 0;
+	while (rest > 0) {
+		unsigned int count = min_t(unsigned int, rest,
+				CI_MAX_BUF_SIZE);
+
+		ret = add_td_to_list(hwep, hwreq, count, s);
+		if (ret < 0)
+			return ret;
+
+		rest -= count;
+	}
+
+	return ret;
+}
+
+static void ci_add_buffer_entry(struct td_node *node, struct scatterlist *s)
+{
+	int empty_td_slot_index = (CI_MAX_BUF_SIZE - node->td_remaining_size)
+			/ CI_HDRC_PAGE_SIZE;
+	int i;
+	u32 token;
+
+	token = le32_to_cpu(node->ptr->token) + (sg_dma_len(s) << __ffs(TD_TOTAL_BYTES));
+	node->ptr->token = cpu_to_le32(token);
+
+	for (i = empty_td_slot_index; i < TD_PAGE_COUNT; i++) {
+		u32 page = (u32) sg_dma_address(s) +
+			(i - empty_td_slot_index) * CI_HDRC_PAGE_SIZE;
+
+		page &= ~TD_RESERVED_MASK;
+		node->ptr->page[i] = cpu_to_le32(page);
+	}
+}
+
+static int prepare_td_for_sg(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
+{
+	struct usb_request *req = &hwreq->req;
+	struct scatterlist *s = req->sg;
+	int ret = 0, i = 0;
+	struct td_node *node = NULL;
+
+	if (!s || req->zero || req->length == 0) {
+		dev_err(hwep->ci->dev, "not supported operation for sg\n");
+		return -EINVAL;
+	}
+
+	while (i++ < req->num_mapped_sgs) {
+		if (sg_dma_address(s) % PAGE_SIZE) {
+			dev_err(hwep->ci->dev, "not page aligned sg buffer\n");
+			return -EINVAL;
+		}
+
+		if (node && (node->td_remaining_size >= sg_dma_len(s))) {
+			ci_add_buffer_entry(node, s);
+			node->td_remaining_size -= sg_dma_len(s);
+		} else {
+			ret = prepare_td_per_sg(hwep, hwreq, s);
+			if (ret)
+				return ret;
+
+			node = list_entry(hwreq->tds.prev,
+				struct td_node, td);
+		}
+
+		s = sg_next(s);
+	}
+
+	return ret;
+}
+
+/**
+ * _hardware_enqueue: configures a request at hardware level
+ * @hwep:   endpoint
+ * @hwreq:  request
+ *
+ * This function returns an error code
+ */
+static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
+{
+	struct ci_hdrc *ci = hwep->ci;
+	int ret = 0;
+	struct td_node *firstnode, *lastnode;
+
+	/* don't queue twice */
+	if (hwreq->req.status == -EALREADY)
+		return -EALREADY;
+
+	hwreq->req.status = -EALREADY;
+
+	ret = usb_gadget_map_request_by_dev(ci->dev->parent,
+					    &hwreq->req, hwep->dir);
+	if (ret)
+		return ret;
+
+	if (hwreq->req.num_mapped_sgs)
+		ret = prepare_td_for_sg(hwep, hwreq);
+	else
+		ret = prepare_td_for_non_sg(hwep, hwreq);
+
+	if (ret)
+		return ret;
+
+	lastnode = list_entry(hwreq->tds.prev,
+		struct td_node, td);
+
+	lastnode->ptr->next = cpu_to_le32(TD_TERMINATE);
+	if (!hwreq->req.no_interrupt)
+		lastnode->ptr->token |= cpu_to_le32(TD_IOC);
+
+	list_for_each_entry_safe(firstnode, lastnode, &hwreq->tds, td)
+		trace_ci_prepare_td(hwep, hwreq, firstnode);
+
+	firstnode = list_first_entry(&hwreq->tds, struct td_node, td);
+
+	wmb();
+
+	hwreq->req.actual = 0;
+	if (!list_empty(&hwep->qh.queue)) {
+		struct ci_hw_req *hwreqprev;
+		int n = hw_ep_bit(hwep->num, hwep->dir);
+		int tmp_stat;
+		struct td_node *prevlastnode;
+		u32 next = firstnode->dma & TD_ADDR_MASK;
+
+		hwreqprev = list_entry(hwep->qh.queue.prev,
+				struct ci_hw_req, queue);
+		prevlastnode = list_entry(hwreqprev->tds.prev,
+				struct td_node, td);
+
+		prevlastnode->ptr->next = cpu_to_le32(next);
+		wmb();
+
+		if (ci->rev == CI_REVISION_22) {
+			if (!hw_read(ci, OP_ENDPTSTAT, BIT(n)))
+				reprime_dtd(ci, hwep, prevlastnode);
+		}
+
+		if (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
+			goto done;
+		do {
+			hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
+			tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n));
+		} while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW));
+		hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0);
+		if (tmp_stat)
+			goto done;
+	}
+
+	/*  QH configuration */
+	hwep->qh.ptr->td.next = cpu_to_le32(firstnode->dma);
+	hwep->qh.ptr->td.token &=
+		cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE));
+
+	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == RX) {
+		u32 mul = hwreq->req.length / hwep->ep.maxpacket;
+
+		if (hwreq->req.length == 0
+				|| hwreq->req.length % hwep->ep.maxpacket)
+			mul++;
+		hwep->qh.ptr->cap |= cpu_to_le32(mul << __ffs(QH_MULT));
+	}
+
+	ret = hw_ep_prime(ci, hwep->num, hwep->dir,
+			   hwep->type == USB_ENDPOINT_XFER_CONTROL);
+done:
+	return ret;
+}
+
+/**
+ * free_pending_td: remove a pending request for the endpoint
+ * @hwep: endpoint
+ */
+static void free_pending_td(struct ci_hw_ep *hwep)
+{
+	struct td_node *pending = hwep->pending_td;
+
+	dma_pool_free(hwep->td_pool, pending->ptr, pending->dma);
+	hwep->pending_td = NULL;
+	kfree(pending);
+}
+
+static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
+					   struct td_node *node)
+{
+	hwep->qh.ptr->td.next = cpu_to_le32(node->dma);
+	hwep->qh.ptr->td.token &=
+		cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE));
+
+	return hw_ep_prime(ci, hwep->num, hwep->dir,
+				hwep->type == USB_ENDPOINT_XFER_CONTROL);
+}
+
+/**
+ * _hardware_dequeue: handles a request at hardware level
+ * @hwep: endpoint
+ * @hwreq:  request
+ *
+ * This function returns an error code
+ */
+static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
+{
+	u32 tmptoken;
+	struct td_node *node, *tmpnode;
+	unsigned remaining_length;
+	unsigned actual = hwreq->req.length;
+	struct ci_hdrc *ci = hwep->ci;
+
+	if (hwreq->req.status != -EALREADY)
+		return -EINVAL;
+
+	hwreq->req.status = 0;
+
+	list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
+		tmptoken = le32_to_cpu(node->ptr->token);
+		trace_ci_complete_td(hwep, hwreq, node);
+		if ((TD_STATUS_ACTIVE & tmptoken) != 0) {
+			int n = hw_ep_bit(hwep->num, hwep->dir);
+
+			if (ci->rev == CI_REVISION_24)
+				if (!hw_read(ci, OP_ENDPTSTAT, BIT(n)))
+					reprime_dtd(ci, hwep, node);
+			hwreq->req.status = -EALREADY;
+			return -EBUSY;
+		}
+
+		remaining_length = (tmptoken & TD_TOTAL_BYTES);
+		remaining_length >>= __ffs(TD_TOTAL_BYTES);
+		actual -= remaining_length;
+
+		hwreq->req.status = tmptoken & TD_STATUS;
+		if ((TD_STATUS_HALTED & hwreq->req.status)) {
+			hwreq->req.status = -EPIPE;
+			break;
+		} else if ((TD_STATUS_DT_ERR & hwreq->req.status)) {
+			hwreq->req.status = -EPROTO;
+			break;
+		} else if ((TD_STATUS_TR_ERR & hwreq->req.status)) {
+			hwreq->req.status = -EILSEQ;
+			break;
+		}
+
+		if (remaining_length) {
+			if (hwep->dir == TX) {
+				hwreq->req.status = -EPROTO;
+				break;
+			}
+		}
+		/*
+		 * As the hardware could still address the freed td
+		 * which will run the udc unusable, the cleanup of the
+		 * td has to be delayed by one.
+		 */
+		if (hwep->pending_td)
+			free_pending_td(hwep);
+
+		hwep->pending_td = node;
+		list_del_init(&node->td);
+	}
+
+	usb_gadget_unmap_request_by_dev(hwep->ci->dev->parent,
+					&hwreq->req, hwep->dir);
+
+	hwreq->req.actual += actual;
+
+	if (hwreq->req.status)
+		return hwreq->req.status;
+
+	return hwreq->req.actual;
+}
+
+/**
+ * _ep_nuke: dequeues all endpoint requests
+ * @hwep: endpoint
+ *
+ * This function returns an error code
+ * Caller must hold lock
+ */
+static int _ep_nuke(struct ci_hw_ep *hwep)
+__releases(hwep->lock)
+__acquires(hwep->lock)
+{
+	struct td_node *node, *tmpnode;
+	if (hwep == NULL)
+		return -EINVAL;
+
+	hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
+
+	while (!list_empty(&hwep->qh.queue)) {
+
+		/* pop oldest request */
+		struct ci_hw_req *hwreq = list_entry(hwep->qh.queue.next,
+						     struct ci_hw_req, queue);
+
+		list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
+			dma_pool_free(hwep->td_pool, node->ptr, node->dma);
+			list_del_init(&node->td);
+			node->ptr = NULL;
+			kfree(node);
+		}
+
+		list_del_init(&hwreq->queue);
+		hwreq->req.status = -ESHUTDOWN;
+
+		if (hwreq->req.complete != NULL) {
+			spin_unlock(hwep->lock);
+			usb_gadget_giveback_request(&hwep->ep, &hwreq->req);
+			spin_lock(hwep->lock);
+		}
+	}
+
+	if (hwep->pending_td)
+		free_pending_td(hwep);
+
+	return 0;
+}
+
+static int _ep_set_halt(struct usb_ep *ep, int value, bool check_transfer)
+{
+	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+	int direction, retval = 0;
+	unsigned long flags;
+
+	if (ep == NULL || hwep->ep.desc == NULL)
+		return -EINVAL;
+
+	if (usb_endpoint_xfer_isoc(hwep->ep.desc))
+		return -EOPNOTSUPP;
+
+	spin_lock_irqsave(hwep->lock, flags);
+
+	if (value && hwep->dir == TX && check_transfer &&
+		!list_empty(&hwep->qh.queue) &&
+			!usb_endpoint_xfer_control(hwep->ep.desc)) {
+		spin_unlock_irqrestore(hwep->lock, flags);
+		return -EAGAIN;
+	}
+
+	direction = hwep->dir;
+	do {
+		retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
+
+		if (!value)
+			hwep->wedge = 0;
+
+		if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
+			hwep->dir = (hwep->dir == TX) ? RX : TX;
+
+	} while (hwep->dir != direction);
+
+	spin_unlock_irqrestore(hwep->lock, flags);
+	return retval;
+}
+
+
+/**
+ * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
+ * @gadget: gadget
+ *
+ * This function returns an error code
+ */
+static int _gadget_stop_activity(struct usb_gadget *gadget)
+{
+	struct usb_ep *ep;
+	struct ci_hdrc    *ci = container_of(gadget, struct ci_hdrc, gadget);
+	unsigned long flags;
+
+	/* flush all endpoints */
+	gadget_for_each_ep(ep, gadget) {
+		usb_ep_fifo_flush(ep);
+	}
+	usb_ep_fifo_flush(&ci->ep0out->ep);
+	usb_ep_fifo_flush(&ci->ep0in->ep);
+
+	/* make sure to disable all endpoints */
+	gadget_for_each_ep(ep, gadget) {
+		usb_ep_disable(ep);
+	}
+
+	if (ci->status != NULL) {
+		usb_ep_free_request(&ci->ep0in->ep, ci->status);
+		ci->status = NULL;
+	}
+
+	spin_lock_irqsave(&ci->lock, flags);
+	ci->gadget.speed = USB_SPEED_UNKNOWN;
+	ci->remote_wakeup = 0;
+	ci->suspended = 0;
+	spin_unlock_irqrestore(&ci->lock, flags);
+
+	return 0;
+}
+
+/******************************************************************************
+ * ISR block
+ *****************************************************************************/
+/**
+ * isr_reset_handler: USB reset interrupt handler
+ * @ci: UDC device
+ *
+ * This function resets USB engine after a bus reset occurred
+ */
+static void isr_reset_handler(struct ci_hdrc *ci)
+__releases(ci->lock)
+__acquires(ci->lock)
+{
+	int retval;
+
+	spin_unlock(&ci->lock);
+	if (ci->gadget.speed != USB_SPEED_UNKNOWN)
+		usb_gadget_udc_reset(&ci->gadget, ci->driver);
+
+	retval = _gadget_stop_activity(&ci->gadget);
+	if (retval)
+		goto done;
+
+	retval = hw_usb_reset(ci);
+	if (retval)
+		goto done;
+
+	ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC);
+	if (ci->status == NULL)
+		retval = -ENOMEM;
+
+done:
+	spin_lock(&ci->lock);
+
+	if (retval)
+		dev_err(ci->dev, "error: %i\n", retval);
+}
+
+/**
+ * isr_get_status_complete: get_status request complete function
+ * @ep:  endpoint
+ * @req: request handled
+ *
+ * Caller must release lock
+ */
+static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	if (ep == NULL || req == NULL)
+		return;
+
+	kfree(req->buf);
+	usb_ep_free_request(ep, req);
+}
+
+/**
+ * _ep_queue: queues (submits) an I/O request to an endpoint
+ * @ep:        endpoint
+ * @req:       request
+ * @gfp_flags: GFP flags (not used)
+ *
+ * Caller must hold lock
+ * This function returns an error code
+ */
+static int _ep_queue(struct usb_ep *ep, struct usb_request *req,
+		    gfp_t __maybe_unused gfp_flags)
+{
+	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
+	struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
+	struct ci_hdrc *ci = hwep->ci;
+	int retval = 0;
+
+	if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
+		return -EINVAL;
+
+	if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
+		if (req->length)
+			hwep = (ci->ep0_dir == RX) ?
+			       ci->ep0out : ci->ep0in;
+		if (!list_empty(&hwep->qh.queue)) {
+			_ep_nuke(hwep);
+			dev_warn(hwep->ci->dev, "endpoint ctrl %X nuked\n",
+				 _usb_addr(hwep));
+		}
+	}
+
+	if (usb_endpoint_xfer_isoc(hwep->ep.desc) &&
+	    hwreq->req.length > hwep->ep.mult * hwep->ep.maxpacket) {
+		dev_err(hwep->ci->dev, "request length too big for isochronous\n");
+		return -EMSGSIZE;
+	}
+
+	/* first nuke then test link, e.g. previous status has not sent */
+	if (!list_empty(&hwreq->queue)) {
+		dev_err(hwep->ci->dev, "request already in queue\n");
+		return -EBUSY;
+	}
+
+	/* push request */
+	hwreq->req.status = -EINPROGRESS;
+	hwreq->req.actual = 0;
+
+	retval = _hardware_enqueue(hwep, hwreq);
+
+	if (retval == -EALREADY)
+		retval = 0;
+	if (!retval)
+		list_add_tail(&hwreq->queue, &hwep->qh.queue);
+
+	return retval;
+}
+
+/**
+ * isr_get_status_response: get_status request response
+ * @ci: ci struct
+ * @setup: setup request packet
+ *
+ * This function returns an error code
+ */
+static int isr_get_status_response(struct ci_hdrc *ci,
+				   struct usb_ctrlrequest *setup)
+__releases(hwep->lock)
+__acquires(hwep->lock)
+{
+	struct ci_hw_ep *hwep = ci->ep0in;
+	struct usb_request *req = NULL;
+	gfp_t gfp_flags = GFP_ATOMIC;
+	int dir, num, retval;
+
+	if (hwep == NULL || setup == NULL)
+		return -EINVAL;
+
+	spin_unlock(hwep->lock);
+	req = usb_ep_alloc_request(&hwep->ep, gfp_flags);
+	spin_lock(hwep->lock);
+	if (req == NULL)
+		return -ENOMEM;
+
+	req->complete = isr_get_status_complete;
+	req->length   = 2;
+	req->buf      = kzalloc(req->length, gfp_flags);
+	if (req->buf == NULL) {
+		retval = -ENOMEM;
+		goto err_free_req;
+	}
+
+	if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
+		*(u16 *)req->buf = (ci->remote_wakeup << 1) |
+			ci->gadget.is_selfpowered;
+	} else if ((setup->bRequestType & USB_RECIP_MASK) \
+		   == USB_RECIP_ENDPOINT) {
+		dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ?
+			TX : RX;
+		num =  le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK;
+		*(u16 *)req->buf = hw_ep_get_halt(ci, num, dir);
+	}
+	/* else do nothing; reserved for future use */
+
+	retval = _ep_queue(&hwep->ep, req, gfp_flags);
+	if (retval)
+		goto err_free_buf;
+
+	return 0;
+
+ err_free_buf:
+	kfree(req->buf);
+ err_free_req:
+	spin_unlock(hwep->lock);
+	usb_ep_free_request(&hwep->ep, req);
+	spin_lock(hwep->lock);
+	return retval;
+}
+
+/**
+ * isr_setup_status_complete: setup_status request complete function
+ * @ep:  endpoint
+ * @req: request handled
+ *
+ * Caller must release lock. Put the port in test mode if test mode
+ * feature is selected.
+ */
+static void
+isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct ci_hdrc *ci = req->context;
+	unsigned long flags;
+
+	if (req->status < 0)
+		return;
+
+	if (ci->setaddr) {
+		hw_usb_set_address(ci, ci->address);
+		ci->setaddr = false;
+		if (ci->address)
+			usb_gadget_set_state(&ci->gadget, USB_STATE_ADDRESS);
+	}
+
+	spin_lock_irqsave(&ci->lock, flags);
+	if (ci->test_mode)
+		hw_port_test_set(ci, ci->test_mode);
+	spin_unlock_irqrestore(&ci->lock, flags);
+}
+
+/**
+ * isr_setup_status_phase: queues the status phase of a setup transation
+ * @ci: ci struct
+ *
+ * This function returns an error code
+ */
+static int isr_setup_status_phase(struct ci_hdrc *ci)
+{
+	struct ci_hw_ep *hwep;
+
+	/*
+	 * Unexpected USB controller behavior, caused by bad signal integrity
+	 * or ground reference problems, can lead to isr_setup_status_phase
+	 * being called with ci->status equal to NULL.
+	 * If this situation occurs, you should review your USB hardware design.
+	 */
+	if (WARN_ON_ONCE(!ci->status))
+		return -EPIPE;
+
+	hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in;
+	ci->status->context = ci;
+	ci->status->complete = isr_setup_status_complete;
+
+	return _ep_queue(&hwep->ep, ci->status, GFP_ATOMIC);
+}
+
+/**
+ * isr_tr_complete_low: transaction complete low level handler
+ * @hwep: endpoint
+ *
+ * This function returns an error code
+ * Caller must hold lock
+ */
+static int isr_tr_complete_low(struct ci_hw_ep *hwep)
+__releases(hwep->lock)
+__acquires(hwep->lock)
+{
+	struct ci_hw_req *hwreq, *hwreqtemp;
+	struct ci_hw_ep *hweptemp = hwep;
+	int retval = 0;
+
+	list_for_each_entry_safe(hwreq, hwreqtemp, &hwep->qh.queue,
+			queue) {
+		retval = _hardware_dequeue(hwep, hwreq);
+		if (retval < 0)
+			break;
+		list_del_init(&hwreq->queue);
+		if (hwreq->req.complete != NULL) {
+			spin_unlock(hwep->lock);
+			if ((hwep->type == USB_ENDPOINT_XFER_CONTROL) &&
+					hwreq->req.length)
+				hweptemp = hwep->ci->ep0in;
+			usb_gadget_giveback_request(&hweptemp->ep, &hwreq->req);
+			spin_lock(hwep->lock);
+		}
+	}
+
+	if (retval == -EBUSY)
+		retval = 0;
+
+	return retval;
+}
+
+static int otg_a_alt_hnp_support(struct ci_hdrc *ci)
+{
+	dev_warn(&ci->gadget.dev,
+		"connect the device to an alternate port if you want HNP\n");
+	return isr_setup_status_phase(ci);
+}
+
+/**
+ * isr_setup_packet_handler: setup packet handler
+ * @ci: UDC descriptor
+ *
+ * This function handles setup packet 
+ */
+static void isr_setup_packet_handler(struct ci_hdrc *ci)
+__releases(ci->lock)
+__acquires(ci->lock)
+{
+	struct ci_hw_ep *hwep = &ci->ci_hw_ep[0];
+	struct usb_ctrlrequest req;
+	int type, num, dir, err = -EINVAL;
+	u8 tmode = 0;
+
+	/*
+	 * Flush data and handshake transactions of previous
+	 * setup packet.
+	 */
+	_ep_nuke(ci->ep0out);
+	_ep_nuke(ci->ep0in);
+
+	/* read_setup_packet */
+	do {
+		hw_test_and_set_setup_guard(ci);
+		memcpy(&req, &hwep->qh.ptr->setup, sizeof(req));
+	} while (!hw_test_and_clear_setup_guard(ci));
+
+	type = req.bRequestType;
+
+	ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
+
+	switch (req.bRequest) {
+	case USB_REQ_CLEAR_FEATURE:
+		if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
+				le16_to_cpu(req.wValue) ==
+				USB_ENDPOINT_HALT) {
+			if (req.wLength != 0)
+				break;
+			num  = le16_to_cpu(req.wIndex);
+			dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX;
+			num &= USB_ENDPOINT_NUMBER_MASK;
+			if (dir == TX)
+				num += ci->hw_ep_max / 2;
+			if (!ci->ci_hw_ep[num].wedge) {
+				spin_unlock(&ci->lock);
+				err = usb_ep_clear_halt(
+					&ci->ci_hw_ep[num].ep);
+				spin_lock(&ci->lock);
+				if (err)
+					break;
+			}
+			err = isr_setup_status_phase(ci);
+		} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
+				le16_to_cpu(req.wValue) ==
+				USB_DEVICE_REMOTE_WAKEUP) {
+			if (req.wLength != 0)
+				break;
+			ci->remote_wakeup = 0;
+			err = isr_setup_status_phase(ci);
+		} else {
+			goto delegate;
+		}
+		break;
+	case USB_REQ_GET_STATUS:
+		if ((type != (USB_DIR_IN|USB_RECIP_DEVICE) ||
+			le16_to_cpu(req.wIndex) == OTG_STS_SELECTOR) &&
+		    type != (USB_DIR_IN|USB_RECIP_ENDPOINT) &&
+		    type != (USB_DIR_IN|USB_RECIP_INTERFACE))
+			goto delegate;
+		if (le16_to_cpu(req.wLength) != 2 ||
+		    le16_to_cpu(req.wValue)  != 0)
+			break;
+		err = isr_get_status_response(ci, &req);
+		break;
+	case USB_REQ_SET_ADDRESS:
+		if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
+			goto delegate;
+		if (le16_to_cpu(req.wLength) != 0 ||
+		    le16_to_cpu(req.wIndex)  != 0)
+			break;
+		ci->address = (u8)le16_to_cpu(req.wValue);
+		ci->setaddr = true;
+		err = isr_setup_status_phase(ci);
+		break;
+	case USB_REQ_SET_FEATURE:
+		if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
+				le16_to_cpu(req.wValue) ==
+				USB_ENDPOINT_HALT) {
+			if (req.wLength != 0)
+				break;
+			num  = le16_to_cpu(req.wIndex);
+			dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX;
+			num &= USB_ENDPOINT_NUMBER_MASK;
+			if (dir == TX)
+				num += ci->hw_ep_max / 2;
+
+			spin_unlock(&ci->lock);
+			err = _ep_set_halt(&ci->ci_hw_ep[num].ep, 1, false);
+			spin_lock(&ci->lock);
+			if (!err)
+				isr_setup_status_phase(ci);
+		} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
+			if (req.wLength != 0)
+				break;
+			switch (le16_to_cpu(req.wValue)) {
+			case USB_DEVICE_REMOTE_WAKEUP:
+				ci->remote_wakeup = 1;
+				err = isr_setup_status_phase(ci);
+				break;
+			case USB_DEVICE_TEST_MODE:
+				tmode = le16_to_cpu(req.wIndex) >> 8;
+				switch (tmode) {
+				case USB_TEST_J:
+				case USB_TEST_K:
+				case USB_TEST_SE0_NAK:
+				case USB_TEST_PACKET:
+				case USB_TEST_FORCE_ENABLE:
+					ci->test_mode = tmode;
+					err = isr_setup_status_phase(
+							ci);
+					break;
+				default:
+					break;
+				}
+				break;
+			case USB_DEVICE_B_HNP_ENABLE:
+				if (ci_otg_is_fsm_mode(ci)) {
+					ci->gadget.b_hnp_enable = 1;
+					err = isr_setup_status_phase(
+							ci);
+				}
+				break;
+			case USB_DEVICE_A_ALT_HNP_SUPPORT:
+				if (ci_otg_is_fsm_mode(ci))
+					err = otg_a_alt_hnp_support(ci);
+				break;
+			case USB_DEVICE_A_HNP_SUPPORT:
+				if (ci_otg_is_fsm_mode(ci)) {
+					ci->gadget.a_hnp_support = 1;
+					err = isr_setup_status_phase(
+							ci);
+				}
+				break;
+			default:
+				goto delegate;
+			}
+		} else {
+			goto delegate;
+		}
+		break;
+	default:
+delegate:
+		if (req.wLength == 0)   /* no data phase */
+			ci->ep0_dir = TX;
+
+		spin_unlock(&ci->lock);
+		err = ci->driver->setup(&ci->gadget, &req);
+		spin_lock(&ci->lock);
+		break;
+	}
+
+	if (err < 0) {
+		spin_unlock(&ci->lock);
+		if (_ep_set_halt(&hwep->ep, 1, false))
+			dev_err(ci->dev, "error: _ep_set_halt\n");
+		spin_lock(&ci->lock);
+	}
+}
+
+/**
+ * isr_tr_complete_handler: transaction complete interrupt handler
+ * @ci: UDC descriptor
+ *
+ * This function handles traffic events
+ */
+static void isr_tr_complete_handler(struct ci_hdrc *ci)
+__releases(ci->lock)
+__acquires(ci->lock)
+{
+	unsigned i;
+	int err;
+
+	for (i = 0; i < ci->hw_ep_max; i++) {
+		struct ci_hw_ep *hwep  = &ci->ci_hw_ep[i];
+
+		if (hwep->ep.desc == NULL)
+			continue;   /* not configured */
+
+		if (hw_test_and_clear_complete(ci, i)) {
+			err = isr_tr_complete_low(hwep);
+			if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
+				if (err > 0)   /* needs status phase */
+					err = isr_setup_status_phase(ci);
+				if (err < 0) {
+					spin_unlock(&ci->lock);
+					if (_ep_set_halt(&hwep->ep, 1, false))
+						dev_err(ci->dev,
+						"error: _ep_set_halt\n");
+					spin_lock(&ci->lock);
+				}
+			}
+		}
+
+		/* Only handle setup packet below */
+		if (i == 0 &&
+			hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(0)))
+			isr_setup_packet_handler(ci);
+	}
+}
+
+/******************************************************************************
+ * ENDPT block
+ *****************************************************************************/
+/*
+ * ep_enable: configure endpoint, making it usable
+ *
+ * Check usb_ep_enable() at "usb_gadget.h" for details
+ */
+static int ep_enable(struct usb_ep *ep,
+		     const struct usb_endpoint_descriptor *desc)
+{
+	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+	int retval = 0;
+	unsigned long flags;
+	u32 cap = 0;
+
+	if (ep == NULL || desc == NULL)
+		return -EINVAL;
+
+	spin_lock_irqsave(hwep->lock, flags);
+
+	/* only internal SW should enable ctrl endpts */
+
+	if (!list_empty(&hwep->qh.queue)) {
+		dev_warn(hwep->ci->dev, "enabling a non-empty endpoint!\n");
+		spin_unlock_irqrestore(hwep->lock, flags);
+		return -EBUSY;
+	}
+
+	hwep->ep.desc = desc;
+
+	hwep->dir  = usb_endpoint_dir_in(desc) ? TX : RX;
+	hwep->num  = usb_endpoint_num(desc);
+	hwep->type = usb_endpoint_type(desc);
+
+	hwep->ep.maxpacket = usb_endpoint_maxp(desc);
+	hwep->ep.mult = usb_endpoint_maxp_mult(desc);
+
+	if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
+		cap |= QH_IOS;
+
+	cap |= QH_ZLT;
+	cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
+	/*
+	 * For ISO-TX, we set mult at QH as the largest value, and use
+	 * MultO at TD as real mult value.
+	 */
+	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX)
+		cap |= 3 << __ffs(QH_MULT);
+
+	hwep->qh.ptr->cap = cpu_to_le32(cap);
+
+	hwep->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE);   /* needed? */
+
+	if (hwep->num != 0 && hwep->type == USB_ENDPOINT_XFER_CONTROL) {
+		dev_err(hwep->ci->dev, "Set control xfer at non-ep0\n");
+		retval = -EINVAL;
+	}
+
+	/*
+	 * Enable endpoints in the HW other than ep0 as ep0
+	 * is always enabled
+	 */
+	if (hwep->num)
+		retval |= hw_ep_enable(hwep->ci, hwep->num, hwep->dir,
+				       hwep->type);
+
+	spin_unlock_irqrestore(hwep->lock, flags);
+	return retval;
+}
+
+/*
+ * ep_disable: endpoint is no longer usable
+ *
+ * Check usb_ep_disable() at "usb_gadget.h" for details
+ */
+static int ep_disable(struct usb_ep *ep)
+{
+	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+	int direction, retval = 0;
+	unsigned long flags;
+
+	if (ep == NULL)
+		return -EINVAL;
+	else if (hwep->ep.desc == NULL)
+		return -EBUSY;
+
+	spin_lock_irqsave(hwep->lock, flags);
+	if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) {
+		spin_unlock_irqrestore(hwep->lock, flags);
+		return 0;
+	}
+
+	/* only internal SW should disable ctrl endpts */
+
+	direction = hwep->dir;
+	do {
+		retval |= _ep_nuke(hwep);
+		retval |= hw_ep_disable(hwep->ci, hwep->num, hwep->dir);
+
+		if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
+			hwep->dir = (hwep->dir == TX) ? RX : TX;
+
+	} while (hwep->dir != direction);
+
+	hwep->ep.desc = NULL;
+
+	spin_unlock_irqrestore(hwep->lock, flags);
+	return retval;
+}
+
+/*
+ * ep_alloc_request: allocate a request object to use with this endpoint
+ *
+ * Check usb_ep_alloc_request() at "usb_gadget.h" for details
+ */
+static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
+{
+	struct ci_hw_req *hwreq = NULL;
+
+	if (ep == NULL)
+		return NULL;
+
+	hwreq = kzalloc(sizeof(struct ci_hw_req), gfp_flags);
+	if (hwreq != NULL) {
+		INIT_LIST_HEAD(&hwreq->queue);
+		INIT_LIST_HEAD(&hwreq->tds);
+	}
+
+	return (hwreq == NULL) ? NULL : &hwreq->req;
+}
+
+/*
+ * ep_free_request: frees a request object
+ *
+ * Check usb_ep_free_request() at "usb_gadget.h" for details
+ */
+static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
+{
+	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
+	struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
+	struct td_node *node, *tmpnode;
+	unsigned long flags;
+
+	if (ep == NULL || req == NULL) {
+		return;
+	} else if (!list_empty(&hwreq->queue)) {
+		dev_err(hwep->ci->dev, "freeing queued request\n");
+		return;
+	}
+
+	spin_lock_irqsave(hwep->lock, flags);
+
+	list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
+		dma_pool_free(hwep->td_pool, node->ptr, node->dma);
+		list_del_init(&node->td);
+		node->ptr = NULL;
+		kfree(node);
+	}
+
+	kfree(hwreq);
+
+	spin_unlock_irqrestore(hwep->lock, flags);
+}
+
+/*
+ * ep_queue: queues (submits) an I/O request to an endpoint
+ *
+ * Check usb_ep_queue()* at usb_gadget.h" for details
+ */
+static int ep_queue(struct usb_ep *ep, struct usb_request *req,
+		    gfp_t __maybe_unused gfp_flags)
+{
+	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
+	int retval = 0;
+	unsigned long flags;
+
+	if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
+		return -EINVAL;
+
+	spin_lock_irqsave(hwep->lock, flags);
+	if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) {
+		spin_unlock_irqrestore(hwep->lock, flags);
+		return 0;
+	}
+	retval = _ep_queue(ep, req, gfp_flags);
+	spin_unlock_irqrestore(hwep->lock, flags);
+	return retval;
+}
+
+/*
+ * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint
+ *
+ * Check usb_ep_dequeue() at "usb_gadget.h" for details
+ */
+static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
+	struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
+	unsigned long flags;
+	struct td_node *node, *tmpnode;
+
+	if (ep == NULL || req == NULL || hwreq->req.status != -EALREADY ||
+		hwep->ep.desc == NULL || list_empty(&hwreq->queue) ||
+		list_empty(&hwep->qh.queue))
+		return -EINVAL;
+
+	spin_lock_irqsave(hwep->lock, flags);
+	if (hwep->ci->gadget.speed != USB_SPEED_UNKNOWN)
+		hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
+
+	list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
+		dma_pool_free(hwep->td_pool, node->ptr, node->dma);
+		list_del(&node->td);
+		kfree(node);
+	}
+
+	/* pop request */
+	list_del_init(&hwreq->queue);
+
+	usb_gadget_unmap_request(&hwep->ci->gadget, req, hwep->dir);
+
+	req->status = -ECONNRESET;
+
+	if (hwreq->req.complete != NULL) {
+		spin_unlock(hwep->lock);
+		usb_gadget_giveback_request(&hwep->ep, &hwreq->req);
+		spin_lock(hwep->lock);
+	}
+
+	spin_unlock_irqrestore(hwep->lock, flags);
+	return 0;
+}
+
+/*
+ * ep_set_halt: sets the endpoint halt feature
+ *
+ * Check usb_ep_set_halt() at "usb_gadget.h" for details
+ */
+static int ep_set_halt(struct usb_ep *ep, int value)
+{
+	return _ep_set_halt(ep, value, true);
+}
+
+/*
+ * ep_set_wedge: sets the halt feature and ignores clear requests
+ *
+ * Check usb_ep_set_wedge() at "usb_gadget.h" for details
+ */
+static int ep_set_wedge(struct usb_ep *ep)
+{
+	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+	unsigned long flags;
+
+	if (ep == NULL || hwep->ep.desc == NULL)
+		return -EINVAL;
+
+	spin_lock_irqsave(hwep->lock, flags);
+	hwep->wedge = 1;
+	spin_unlock_irqrestore(hwep->lock, flags);
+
+	return usb_ep_set_halt(ep);
+}
+
+/*
+ * ep_fifo_flush: flushes contents of a fifo
+ *
+ * Check usb_ep_fifo_flush() at "usb_gadget.h" for details
+ */
+static void ep_fifo_flush(struct usb_ep *ep)
+{
+	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+	unsigned long flags;
+
+	if (ep == NULL) {
+		dev_err(hwep->ci->dev, "%02X: -EINVAL\n", _usb_addr(hwep));
+		return;
+	}
+
+	spin_lock_irqsave(hwep->lock, flags);
+	if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) {
+		spin_unlock_irqrestore(hwep->lock, flags);
+		return;
+	}
+
+	hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
+
+	spin_unlock_irqrestore(hwep->lock, flags);
+}
+
+/*
+ * Endpoint-specific part of the API to the USB controller hardware
+ * Check "usb_gadget.h" for details
+ */
+static const struct usb_ep_ops usb_ep_ops = {
+	.enable	       = ep_enable,
+	.disable       = ep_disable,
+	.alloc_request = ep_alloc_request,
+	.free_request  = ep_free_request,
+	.queue	       = ep_queue,
+	.dequeue       = ep_dequeue,
+	.set_halt      = ep_set_halt,
+	.set_wedge     = ep_set_wedge,
+	.fifo_flush    = ep_fifo_flush,
+};
+
+/******************************************************************************
+ * GADGET block
+ *****************************************************************************/
+
+static int ci_udc_get_frame(struct usb_gadget *_gadget)
+{
+	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&ci->lock, flags);
+	ret = hw_read(ci, OP_FRINDEX, 0x3fff);
+	spin_unlock_irqrestore(&ci->lock, flags);
+	return ret >> 3;
+}
+
+/*
+ * ci_hdrc_gadget_connect: caller makes sure gadget driver is binded
+ */
+static void ci_hdrc_gadget_connect(struct usb_gadget *_gadget, int is_active)
+{
+	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
+
+	if (is_active) {
+		pm_runtime_get_sync(ci->dev);
+		hw_device_reset(ci);
+		spin_lock_irq(&ci->lock);
+		if (ci->driver) {
+			hw_device_state(ci, ci->ep0out->qh.dma);
+			usb_gadget_set_state(_gadget, USB_STATE_POWERED);
+			spin_unlock_irq(&ci->lock);
+			usb_udc_vbus_handler(_gadget, true);
+		} else {
+			spin_unlock_irq(&ci->lock);
+		}
+	} else {
+		usb_udc_vbus_handler(_gadget, false);
+		if (ci->driver)
+			ci->driver->disconnect(&ci->gadget);
+		hw_device_state(ci, 0);
+		if (ci->platdata->notify_event)
+			ci->platdata->notify_event(ci,
+			CI_HDRC_CONTROLLER_STOPPED_EVENT);
+		_gadget_stop_activity(&ci->gadget);
+		pm_runtime_put_sync(ci->dev);
+		usb_gadget_set_state(_gadget, USB_STATE_NOTATTACHED);
+	}
+}
+
+static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
+{
+	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&ci->lock, flags);
+	ci->vbus_active = is_active;
+	spin_unlock_irqrestore(&ci->lock, flags);
+
+	if (ci->usb_phy)
+		usb_phy_set_charger_state(ci->usb_phy, is_active ?
+			USB_CHARGER_PRESENT : USB_CHARGER_ABSENT);
+
+	if (ci->platdata->notify_event)
+		ret = ci->platdata->notify_event(ci,
+				CI_HDRC_CONTROLLER_VBUS_EVENT);
+
+	if (ci->driver)
+		ci_hdrc_gadget_connect(_gadget, is_active);
+
+	return ret;
+}
+
+static int ci_udc_wakeup(struct usb_gadget *_gadget)
+{
+	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&ci->lock, flags);
+	if (ci->gadget.speed == USB_SPEED_UNKNOWN) {
+		spin_unlock_irqrestore(&ci->lock, flags);
+		return 0;
+	}
+	if (!ci->remote_wakeup) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+	if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) {
+		ret = -EINVAL;
+		goto out;
+	}
+	hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR);
+out:
+	spin_unlock_irqrestore(&ci->lock, flags);
+	return ret;
+}
+
+static int ci_udc_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
+{
+	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
+
+	if (ci->usb_phy)
+		return usb_phy_set_power(ci->usb_phy, ma);
+	return -ENOTSUPP;
+}
+
+static int ci_udc_selfpowered(struct usb_gadget *_gadget, int is_on)
+{
+	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
+	struct ci_hw_ep *hwep = ci->ep0in;
+	unsigned long flags;
+
+	spin_lock_irqsave(hwep->lock, flags);
+	_gadget->is_selfpowered = (is_on != 0);
+	spin_unlock_irqrestore(hwep->lock, flags);
+
+	return 0;
+}
+
+/* Change Data+ pullup status
+ * this func is used by usb_gadget_connect/disconnect
+ */
+static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on)
+{
+	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
+
+	/*
+	 * Data+ pullup controlled by OTG state machine in OTG fsm mode;
+	 * and don't touch Data+ in host mode for dual role config.
+	 */
+	if (ci_otg_is_fsm_mode(ci) || ci->role == CI_ROLE_HOST)
+		return 0;
+
+	pm_runtime_get_sync(ci->dev);
+	if (is_on)
+		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
+	else
+		hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+	pm_runtime_put_sync(ci->dev);
+
+	return 0;
+}
+
+static int ci_udc_start(struct usb_gadget *gadget,
+			 struct usb_gadget_driver *driver);
+static int ci_udc_stop(struct usb_gadget *gadget);
+
+/* Match ISOC IN from the highest endpoint */
+static struct usb_ep *ci_udc_match_ep(struct usb_gadget *gadget,
+			      struct usb_endpoint_descriptor *desc,
+			      struct usb_ss_ep_comp_descriptor *comp_desc)
+{
+	struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
+	struct usb_ep *ep;
+
+	if (usb_endpoint_xfer_isoc(desc) && usb_endpoint_dir_in(desc)) {
+		list_for_each_entry_reverse(ep, &ci->gadget.ep_list, ep_list) {
+			if (ep->caps.dir_in && !ep->claimed)
+				return ep;
+		}
+	}
+
+	return NULL;
+}
+
+/*
+ * Device operations part of the API to the USB controller hardware,
+ * which don't involve endpoints (or i/o)
+ * Check  "usb_gadget.h" for details
+ */
+static const struct usb_gadget_ops usb_gadget_ops = {
+	.get_frame	= ci_udc_get_frame,
+	.vbus_session	= ci_udc_vbus_session,
+	.wakeup		= ci_udc_wakeup,
+	.set_selfpowered	= ci_udc_selfpowered,
+	.pullup		= ci_udc_pullup,
+	.vbus_draw	= ci_udc_vbus_draw,
+	.udc_start	= ci_udc_start,
+	.udc_stop	= ci_udc_stop,
+	.match_ep 	= ci_udc_match_ep,
+};
+
+static int init_eps(struct ci_hdrc *ci)
+{
+	int retval = 0, i, j;
+
+	for (i = 0; i < ci->hw_ep_max/2; i++)
+		for (j = RX; j <= TX; j++) {
+			int k = i + j * ci->hw_ep_max/2;
+			struct ci_hw_ep *hwep = &ci->ci_hw_ep[k];
+
+			scnprintf(hwep->name, sizeof(hwep->name), "ep%i%s", i,
+					(j == TX)  ? "in" : "out");
+
+			hwep->ci          = ci;
+			hwep->lock         = &ci->lock;
+			hwep->td_pool      = ci->td_pool;
+
+			hwep->ep.name      = hwep->name;
+			hwep->ep.ops       = &usb_ep_ops;
+
+			if (i == 0) {
+				hwep->ep.caps.type_control = true;
+			} else {
+				hwep->ep.caps.type_iso = true;
+				hwep->ep.caps.type_bulk = true;
+				hwep->ep.caps.type_int = true;
+			}
+
+			if (j == TX)
+				hwep->ep.caps.dir_in = true;
+			else
+				hwep->ep.caps.dir_out = true;
+
+			/*
+			 * for ep0: maxP defined in desc, for other
+			 * eps, maxP is set by epautoconfig() called
+			 * by gadget layer
+			 */
+			usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0);
+
+			INIT_LIST_HEAD(&hwep->qh.queue);
+			hwep->qh.ptr = dma_pool_zalloc(ci->qh_pool, GFP_KERNEL,
+						       &hwep->qh.dma);
+			if (hwep->qh.ptr == NULL)
+				retval = -ENOMEM;
+
+			/*
+			 * set up shorthands for ep0 out and in endpoints,
+			 * don't add to gadget's ep_list
+			 */
+			if (i == 0) {
+				if (j == RX)
+					ci->ep0out = hwep;
+				else
+					ci->ep0in = hwep;
+
+				usb_ep_set_maxpacket_limit(&hwep->ep, CTRL_PAYLOAD_MAX);
+				continue;
+			}
+
+			list_add_tail(&hwep->ep.ep_list, &ci->gadget.ep_list);
+		}
+
+	return retval;
+}
+
+static void destroy_eps(struct ci_hdrc *ci)
+{
+	int i;
+
+	for (i = 0; i < ci->hw_ep_max; i++) {
+		struct ci_hw_ep *hwep = &ci->ci_hw_ep[i];
+
+		if (hwep->pending_td)
+			free_pending_td(hwep);
+		dma_pool_free(ci->qh_pool, hwep->qh.ptr, hwep->qh.dma);
+	}
+}
+
+/**
+ * ci_udc_start: register a gadget driver
+ * @gadget: our gadget
+ * @driver: the driver being registered
+ *
+ * Interrupts are enabled here.
+ */
+static int ci_udc_start(struct usb_gadget *gadget,
+			 struct usb_gadget_driver *driver)
+{
+	struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
+	int retval;
+
+	if (driver->disconnect == NULL)
+		return -EINVAL;
+
+	ci->ep0out->ep.desc = &ctrl_endpt_out_desc;
+	retval = usb_ep_enable(&ci->ep0out->ep);
+	if (retval)
+		return retval;
+
+	ci->ep0in->ep.desc = &ctrl_endpt_in_desc;
+	retval = usb_ep_enable(&ci->ep0in->ep);
+	if (retval)
+		return retval;
+
+	ci->driver = driver;
+
+	/* Start otg fsm for B-device */
+	if (ci_otg_is_fsm_mode(ci) && ci->fsm.id) {
+		ci_hdrc_otg_fsm_start(ci);
+		return retval;
+	}
+
+	if (ci->vbus_active)
+		ci_hdrc_gadget_connect(gadget, 1);
+	else
+		usb_udc_vbus_handler(&ci->gadget, false);
+
+	return retval;
+}
+
+static void ci_udc_stop_for_otg_fsm(struct ci_hdrc *ci)
+{
+	if (!ci_otg_is_fsm_mode(ci))
+		return;
+
+	mutex_lock(&ci->fsm.lock);
+	if (ci->fsm.otg->state == OTG_STATE_A_PERIPHERAL) {
+		ci->fsm.a_bidl_adis_tmout = 1;
+		ci_hdrc_otg_fsm_start(ci);
+	} else if (ci->fsm.otg->state == OTG_STATE_B_PERIPHERAL) {
+		ci->fsm.protocol = PROTO_UNDEF;
+		ci->fsm.otg->state = OTG_STATE_UNDEFINED;
+	}
+	mutex_unlock(&ci->fsm.lock);
+}
+
+/*
+ * ci_udc_stop: unregister a gadget driver
+ */
+static int ci_udc_stop(struct usb_gadget *gadget)
+{
+	struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ci->lock, flags);
+	ci->driver = NULL;
+
+	if (ci->vbus_active) {
+		hw_device_state(ci, 0);
+		spin_unlock_irqrestore(&ci->lock, flags);
+		if (ci->platdata->notify_event)
+			ci->platdata->notify_event(ci,
+			CI_HDRC_CONTROLLER_STOPPED_EVENT);
+		_gadget_stop_activity(&ci->gadget);
+		spin_lock_irqsave(&ci->lock, flags);
+		pm_runtime_put(ci->dev);
+	}
+
+	spin_unlock_irqrestore(&ci->lock, flags);
+
+	ci_udc_stop_for_otg_fsm(ci);
+	return 0;
+}
+
+/******************************************************************************
+ * BUS block
+ *****************************************************************************/
+/*
+ * udc_irq: ci interrupt handler
+ *
+ * This function returns IRQ_HANDLED if the IRQ has been handled
+ * It locks access to registers
+ */
+static irqreturn_t udc_irq(struct ci_hdrc *ci)
+{
+	irqreturn_t retval;
+	u32 intr;
+
+	if (ci == NULL)
+		return IRQ_HANDLED;
+
+	spin_lock(&ci->lock);
+
+	if (ci->platdata->flags & CI_HDRC_REGS_SHARED) {
+		if (hw_read(ci, OP_USBMODE, USBMODE_CM) !=
+				USBMODE_CM_DC) {
+			spin_unlock(&ci->lock);
+			return IRQ_NONE;
+		}
+	}
+	intr = hw_test_and_clear_intr_active(ci);
+
+	if (intr) {
+		/* order defines priority - do NOT change it */
+		if (USBi_URI & intr)
+			isr_reset_handler(ci);
+
+		if (USBi_PCI & intr) {
+			ci->gadget.speed = hw_port_is_high_speed(ci) ?
+				USB_SPEED_HIGH : USB_SPEED_FULL;
+			if (ci->suspended) {
+				if (ci->driver->resume) {
+					spin_unlock(&ci->lock);
+					ci->driver->resume(&ci->gadget);
+					spin_lock(&ci->lock);
+				}
+				ci->suspended = 0;
+				usb_gadget_set_state(&ci->gadget,
+						ci->resume_state);
+			}
+		}
+
+		if (USBi_UI  & intr)
+			isr_tr_complete_handler(ci);
+
+		if ((USBi_SLI & intr) && !(ci->suspended)) {
+			ci->suspended = 1;
+			ci->resume_state = ci->gadget.state;
+			if (ci->gadget.speed != USB_SPEED_UNKNOWN &&
+			    ci->driver->suspend) {
+				spin_unlock(&ci->lock);
+				ci->driver->suspend(&ci->gadget);
+				spin_lock(&ci->lock);
+			}
+			usb_gadget_set_state(&ci->gadget,
+					USB_STATE_SUSPENDED);
+		}
+		retval = IRQ_HANDLED;
+	} else {
+		retval = IRQ_NONE;
+	}
+	spin_unlock(&ci->lock);
+
+	return retval;
+}
+
+/**
+ * udc_start: initialize gadget role
+ * @ci: chipidea controller
+ */
+static int udc_start(struct ci_hdrc *ci)
+{
+	struct device *dev = ci->dev;
+	struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps;
+	int retval = 0;
+
+	ci->gadget.ops          = &usb_gadget_ops;
+	ci->gadget.speed        = USB_SPEED_UNKNOWN;
+	ci->gadget.max_speed    = USB_SPEED_HIGH;
+	ci->gadget.name         = ci->platdata->name;
+	ci->gadget.otg_caps	= otg_caps;
+	ci->gadget.sg_supported = 1;
+	ci->gadget.irq		= ci->irq;
+
+	if (ci->platdata->flags & CI_HDRC_REQUIRES_ALIGNED_DMA)
+		ci->gadget.quirk_avoids_skb_reserve = 1;
+
+	if (ci->is_otg && (otg_caps->hnp_support || otg_caps->srp_support ||
+						otg_caps->adp_support))
+		ci->gadget.is_otg = 1;
+
+	INIT_LIST_HEAD(&ci->gadget.ep_list);
+
+	/* alloc resources */
+	ci->qh_pool = dma_pool_create("ci_hw_qh", dev->parent,
+				       sizeof(struct ci_hw_qh),
+				       64, CI_HDRC_PAGE_SIZE);
+	if (ci->qh_pool == NULL)
+		return -ENOMEM;
+
+	ci->td_pool = dma_pool_create("ci_hw_td", dev->parent,
+				       sizeof(struct ci_hw_td),
+				       64, CI_HDRC_PAGE_SIZE);
+	if (ci->td_pool == NULL) {
+		retval = -ENOMEM;
+		goto free_qh_pool;
+	}
+
+	retval = init_eps(ci);
+	if (retval)
+		goto free_pools;
+
+	ci->gadget.ep0 = &ci->ep0in->ep;
+
+	retval = usb_add_gadget_udc(dev, &ci->gadget);
+	if (retval)
+		goto destroy_eps;
+
+	return retval;
+
+destroy_eps:
+	destroy_eps(ci);
+free_pools:
+	dma_pool_destroy(ci->td_pool);
+free_qh_pool:
+	dma_pool_destroy(ci->qh_pool);
+	return retval;
+}
+
+/*
+ * ci_hdrc_gadget_destroy: parent remove must call this to remove UDC
+ *
+ * No interrupts active, the IRQ has been released
+ */
+void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
+{
+	if (!ci->roles[CI_ROLE_GADGET])
+		return;
+
+	usb_del_gadget_udc(&ci->gadget);
+
+	destroy_eps(ci);
+
+	dma_pool_destroy(ci->td_pool);
+	dma_pool_destroy(ci->qh_pool);
+}
+
+static int udc_id_switch_for_device(struct ci_hdrc *ci)
+{
+	if (ci->platdata->pins_device)
+		pinctrl_select_state(ci->platdata->pctl,
+				     ci->platdata->pins_device);
+
+	if (ci->is_otg)
+		/* Clear and enable BSV irq */
+		hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE,
+					OTGSC_BSVIS | OTGSC_BSVIE);
+
+	return 0;
+}
+
+static void udc_id_switch_for_host(struct ci_hdrc *ci)
+{
+	/*
+	 * host doesn't care B_SESSION_VALID event
+	 * so clear and disable BSV irq
+	 */
+	if (ci->is_otg)
+		hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS);
+
+	ci->vbus_active = 0;
+
+	if (ci->platdata->pins_device && ci->platdata->pins_default)
+		pinctrl_select_state(ci->platdata->pctl,
+				     ci->platdata->pins_default);
+}
+
+/**
+ * ci_hdrc_gadget_init - initialize device related bits
+ * @ci: the controller
+ *
+ * This function initializes the gadget, if the device is "device capable".
+ */
+int ci_hdrc_gadget_init(struct ci_hdrc *ci)
+{
+	struct ci_role_driver *rdrv;
+	int ret;
+
+	if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC))
+		return -ENXIO;
+
+	rdrv = devm_kzalloc(ci->dev, sizeof(*rdrv), GFP_KERNEL);
+	if (!rdrv)
+		return -ENOMEM;
+
+	rdrv->start	= udc_id_switch_for_device;
+	rdrv->stop	= udc_id_switch_for_host;
+	rdrv->irq	= udc_irq;
+	rdrv->name	= "gadget";
+
+	ret = udc_start(ci);
+	if (!ret)
+		ci->roles[CI_ROLE_GADGET] = rdrv;
+
+	return ret;
+}
diff --git a/drivers/usb/chipidea/udc.h b/drivers/usb/chipidea/udc.h
new file mode 100644
index 000000000..5193df1e1
--- /dev/null
+++ b/drivers/usb/chipidea/udc.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * udc.h - ChipIdea UDC structures
+ *
+ * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ *
+ * Author: David Lopo
+ */
+
+#ifndef __DRIVERS_USB_CHIPIDEA_UDC_H
+#define __DRIVERS_USB_CHIPIDEA_UDC_H
+
+#include <linux/list.h>
+
+#define CTRL_PAYLOAD_MAX   64
+#define RX        0  /* similar to USB_DIR_OUT but can be used as an index */
+#define TX        1  /* similar to USB_DIR_IN  but can be used as an index */
+
+/* DMA layout of transfer descriptors */
+struct ci_hw_td {
+	/* 0 */
+	__le32 next;
+#define TD_TERMINATE          BIT(0)
+#define TD_ADDR_MASK          (0xFFFFFFEUL << 5)
+	/* 1 */
+	__le32 token;
+#define TD_STATUS             (0x00FFUL <<  0)
+#define TD_STATUS_TR_ERR      BIT(3)
+#define TD_STATUS_DT_ERR      BIT(5)
+#define TD_STATUS_HALTED      BIT(6)
+#define TD_STATUS_ACTIVE      BIT(7)
+#define TD_MULTO              (0x0003UL << 10)
+#define TD_IOC                BIT(15)
+#define TD_TOTAL_BYTES        (0x7FFFUL << 16)
+	/* 2 */
+	__le32 page[5];
+#define TD_CURR_OFFSET        (0x0FFFUL <<  0)
+#define TD_FRAME_NUM          (0x07FFUL <<  0)
+#define TD_RESERVED_MASK      (0x0FFFUL <<  0)
+} __attribute__ ((packed, aligned(4)));
+
+/* DMA layout of queue heads */
+struct ci_hw_qh {
+	/* 0 */
+	__le32 cap;
+#define QH_IOS                BIT(15)
+#define QH_MAX_PKT            (0x07FFUL << 16)
+#define QH_ZLT                BIT(29)
+#define QH_MULT               (0x0003UL << 30)
+#define QH_ISO_MULT(x)		((x >> 11) & 0x03)
+	/* 1 */
+	__le32 curr;
+	/* 2 - 8 */
+	struct ci_hw_td		td;
+	/* 9 */
+	__le32 RESERVED;
+	struct usb_ctrlrequest   setup;
+} __attribute__ ((packed, aligned(4)));
+
+struct td_node {
+	struct list_head	td;
+	dma_addr_t		dma;
+	struct ci_hw_td		*ptr;
+	int			td_remaining_size;
+};
+
+/**
+ * struct ci_hw_req - usb request representation
+ * @req: request structure for gadget drivers
+ * @queue: link to QH list
+ * @tds: link to TD list
+ */
+struct ci_hw_req {
+	struct usb_request	req;
+	struct list_head	queue;
+	struct list_head	tds;
+};
+
+#ifdef CONFIG_USB_CHIPIDEA_UDC
+
+int ci_hdrc_gadget_init(struct ci_hdrc *ci);
+void ci_hdrc_gadget_destroy(struct ci_hdrc *ci);
+
+#else
+
+static inline int ci_hdrc_gadget_init(struct ci_hdrc *ci)
+{
+	return -ENXIO;
+}
+
+static inline void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
+{
+
+}
+
+#endif
+
+#endif /* __DRIVERS_USB_CHIPIDEA_UDC_H */
diff --git a/drivers/usb/chipidea/ulpi.c b/drivers/usb/chipidea/ulpi.c
new file mode 100644
index 000000000..dfec07e8a
--- /dev/null
+++ b/drivers/usb/chipidea/ulpi.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2016 Linaro Ltd.
+ */
+
+#include <linux/device.h>
+#include <linux/usb/chipidea.h>
+#include <linux/ulpi/interface.h>
+
+#include "ci.h"
+
+#define ULPI_WAKEUP		BIT(31)
+#define ULPI_RUN		BIT(30)
+#define ULPI_WRITE		BIT(29)
+#define ULPI_SYNC_STATE		BIT(27)
+#define ULPI_ADDR(n)		((n) << 16)
+#define ULPI_DATA(n)		(n)
+
+static int ci_ulpi_wait(struct ci_hdrc *ci, u32 mask)
+{
+	unsigned long usec = 10000;
+
+	while (usec--) {
+		if (!hw_read(ci, OP_ULPI_VIEWPORT, mask))
+			return 0;
+
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int ci_ulpi_read(struct device *dev, u8 addr)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+	int ret;
+
+	hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, ULPI_WRITE | ULPI_WAKEUP);
+	ret = ci_ulpi_wait(ci, ULPI_WAKEUP);
+	if (ret)
+		return ret;
+
+	hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, ULPI_RUN | ULPI_ADDR(addr));
+	ret = ci_ulpi_wait(ci, ULPI_RUN);
+	if (ret)
+		return ret;
+
+	return hw_read(ci, OP_ULPI_VIEWPORT, GENMASK(15, 8)) >> 8;
+}
+
+static int ci_ulpi_write(struct device *dev, u8 addr, u8 val)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+	int ret;
+
+	hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, ULPI_WRITE | ULPI_WAKEUP);
+	ret = ci_ulpi_wait(ci, ULPI_WAKEUP);
+	if (ret)
+		return ret;
+
+	hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff,
+		 ULPI_RUN | ULPI_WRITE | ULPI_ADDR(addr) | val);
+	return ci_ulpi_wait(ci, ULPI_RUN);
+}
+
+int ci_ulpi_init(struct ci_hdrc *ci)
+{
+	if (ci->platdata->phy_mode != USBPHY_INTERFACE_MODE_ULPI)
+		return 0;
+
+	/*
+	 * Set PORTSC correctly so we can read/write ULPI registers for
+	 * identification purposes
+	 */
+	hw_phymode_configure(ci);
+
+	ci->ulpi_ops.read = ci_ulpi_read;
+	ci->ulpi_ops.write = ci_ulpi_write;
+	ci->ulpi = ulpi_register_interface(ci->dev, &ci->ulpi_ops);
+	if (IS_ERR(ci->ulpi))
+		dev_err(ci->dev, "failed to register ULPI interface");
+
+	return PTR_ERR_OR_ZERO(ci->ulpi);
+}
+
+void ci_ulpi_exit(struct ci_hdrc *ci)
+{
+	if (ci->ulpi) {
+		ulpi_unregister_interface(ci->ulpi);
+		ci->ulpi = NULL;
+	}
+}
+
+int ci_ulpi_resume(struct ci_hdrc *ci)
+{
+	int cnt = 100000;
+
+	if (ci->platdata->phy_mode != USBPHY_INTERFACE_MODE_ULPI)
+		return 0;
+
+	while (cnt-- > 0) {
+		if (hw_read(ci, OP_ULPI_VIEWPORT, ULPI_SYNC_STATE))
+			return 0;
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
new file mode 100644
index 000000000..a2cb4f48c
--- /dev/null
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -0,0 +1,1187 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/otg.h>
+
+#include "ci_hdrc_imx.h"
+
+#define MX25_USB_PHY_CTRL_OFFSET	0x08
+#define MX25_BM_EXTERNAL_VBUS_DIVIDER	BIT(23)
+
+#define MX25_EHCI_INTERFACE_SINGLE_UNI	(2 << 0)
+#define MX25_EHCI_INTERFACE_DIFF_UNI	(0 << 0)
+#define MX25_EHCI_INTERFACE_MASK	(0xf)
+
+#define MX25_OTG_SIC_SHIFT		29
+#define MX25_OTG_SIC_MASK		(0x3 << MX25_OTG_SIC_SHIFT)
+#define MX25_OTG_PM_BIT			BIT(24)
+#define MX25_OTG_PP_BIT			BIT(11)
+#define MX25_OTG_OCPOL_BIT		BIT(3)
+
+#define MX25_H1_SIC_SHIFT		21
+#define MX25_H1_SIC_MASK		(0x3 << MX25_H1_SIC_SHIFT)
+#define MX25_H1_PP_BIT			BIT(18)
+#define MX25_H1_PM_BIT			BIT(16)
+#define MX25_H1_IPPUE_UP_BIT		BIT(7)
+#define MX25_H1_IPPUE_DOWN_BIT		BIT(6)
+#define MX25_H1_TLL_BIT			BIT(5)
+#define MX25_H1_USBTE_BIT		BIT(4)
+#define MX25_H1_OCPOL_BIT		BIT(2)
+
+#define MX27_H1_PM_BIT			BIT(8)
+#define MX27_H2_PM_BIT			BIT(16)
+#define MX27_OTG_PM_BIT			BIT(24)
+
+#define MX53_USB_OTG_PHY_CTRL_0_OFFSET	0x08
+#define MX53_USB_OTG_PHY_CTRL_1_OFFSET	0x0c
+#define MX53_USB_CTRL_1_OFFSET	        0x10
+#define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK (0x11 << 2)
+#define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI BIT(2)
+#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK (0x11 << 6)
+#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI BIT(6)
+#define MX53_USB_UH2_CTRL_OFFSET	0x14
+#define MX53_USB_UH3_CTRL_OFFSET	0x18
+#define MX53_USB_CLKONOFF_CTRL_OFFSET	0x24
+#define MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF BIT(21)
+#define MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF BIT(22)
+#define MX53_BM_OVER_CUR_DIS_H1		BIT(5)
+#define MX53_BM_OVER_CUR_DIS_OTG	BIT(8)
+#define MX53_BM_OVER_CUR_DIS_UHx	BIT(30)
+#define MX53_USB_CTRL_1_UH2_ULPI_EN	BIT(26)
+#define MX53_USB_CTRL_1_UH3_ULPI_EN	BIT(27)
+#define MX53_USB_UHx_CTRL_WAKE_UP_EN	BIT(7)
+#define MX53_USB_UHx_CTRL_ULPI_INT_EN	BIT(8)
+#define MX53_USB_PHYCTRL1_PLLDIV_MASK	0x3
+#define MX53_USB_PLL_DIV_24_MHZ		0x01
+
+#define MX6_BM_NON_BURST_SETTING	BIT(1)
+#define MX6_BM_OVER_CUR_DIS		BIT(7)
+#define MX6_BM_OVER_CUR_POLARITY	BIT(8)
+#define MX6_BM_PWR_POLARITY		BIT(9)
+#define MX6_BM_WAKEUP_ENABLE		BIT(10)
+#define MX6_BM_UTMI_ON_CLOCK		BIT(13)
+#define MX6_BM_ID_WAKEUP		BIT(16)
+#define MX6_BM_VBUS_WAKEUP		BIT(17)
+#define MX6SX_BM_DPDM_WAKEUP_EN		BIT(29)
+#define MX6_BM_WAKEUP_INTR		BIT(31)
+
+#define MX6_USB_HSIC_CTRL_OFFSET	0x10
+/* Send resume signal without 480Mhz PHY clock */
+#define MX6SX_BM_HSIC_AUTO_RESUME	BIT(23)
+/* set before portsc.suspendM = 1 */
+#define MX6_BM_HSIC_DEV_CONN		BIT(21)
+/* HSIC enable */
+#define MX6_BM_HSIC_EN			BIT(12)
+/* Force HSIC module 480M clock on, even when in Host is in suspend mode */
+#define MX6_BM_HSIC_CLK_ON		BIT(11)
+
+#define MX6_USB_OTG1_PHY_CTRL		0x18
+/* For imx6dql, it is host-only controller, for later imx6, it is otg's */
+#define MX6_USB_OTG2_PHY_CTRL		0x1c
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE(v)	(v << 8)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_VBUS	MX6SX_USB_VBUS_WAKEUP_SOURCE(0)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_AVALID	MX6SX_USB_VBUS_WAKEUP_SOURCE(1)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID	MX6SX_USB_VBUS_WAKEUP_SOURCE(2)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_SESS_END	MX6SX_USB_VBUS_WAKEUP_SOURCE(3)
+
+#define VF610_OVER_CUR_DIS		BIT(7)
+
+#define MX7D_USBNC_USB_CTRL2		0x4
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_MASK	0x3
+#define MX7D_USB_VBUS_WAKEUP_SOURCE(v)		(v << 0)
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_VBUS	MX7D_USB_VBUS_WAKEUP_SOURCE(0)
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_AVALID	MX7D_USB_VBUS_WAKEUP_SOURCE(1)
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID	MX7D_USB_VBUS_WAKEUP_SOURCE(2)
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_SESS_END	MX7D_USB_VBUS_WAKEUP_SOURCE(3)
+#define MX7D_USBNC_AUTO_RESUME				BIT(2)
+/* The default DM/DP value is pull-down */
+#define MX7D_USBNC_USB_CTRL2_OPMODE(v)			(v << 6)
+#define MX7D_USBNC_USB_CTRL2_OPMODE_NON_DRIVING	MX7D_USBNC_USB_CTRL2_OPMODE(1)
+#define MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK	(BIT(7) | BIT(6))
+#define MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN		BIT(8)
+#define MX7D_USBNC_USB_CTRL2_DP_OVERRIDE_VAL		BIT(12)
+#define MX7D_USBNC_USB_CTRL2_DP_OVERRIDE_EN		BIT(13)
+#define MX7D_USBNC_USB_CTRL2_DM_OVERRIDE_VAL		BIT(14)
+#define MX7D_USBNC_USB_CTRL2_DM_OVERRIDE_EN		BIT(15)
+#define MX7D_USBNC_USB_CTRL2_DP_DM_MASK			(BIT(12) | BIT(13) | \
+							BIT(14) | BIT(15))
+
+#define MX7D_USB_OTG_PHY_CFG1		0x30
+#define MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL	BIT(0)
+#define MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0	BIT(1)
+#define MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0	BIT(2)
+#define MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB	BIT(3)
+#define MX7D_USB_OTG_PHY_CFG2_DRVVBUS0		BIT(16)
+
+#define MX7D_USB_OTG_PHY_CFG2		0x34
+
+#define MX7D_USB_OTG_PHY_STATUS		0x3c
+#define MX7D_USB_OTG_PHY_STATUS_LINE_STATE0	BIT(0)
+#define MX7D_USB_OTG_PHY_STATUS_LINE_STATE1	BIT(1)
+#define MX7D_USB_OTG_PHY_STATUS_VBUS_VLD	BIT(3)
+#define MX7D_USB_OTG_PHY_STATUS_CHRGDET		BIT(29)
+
+#define MX7D_USB_OTG_PHY_CFG1		0x30
+#define TXPREEMPAMPTUNE0_BIT		28
+#define TXPREEMPAMPTUNE0_MASK		(3 << 28)
+#define TXVREFTUNE0_BIT			20
+#define TXVREFTUNE0_MASK		(0xf << 20)
+
+#define MX6_USB_OTG_WAKEUP_BITS (MX6_BM_WAKEUP_ENABLE | MX6_BM_VBUS_WAKEUP | \
+				 MX6_BM_ID_WAKEUP | MX6SX_BM_DPDM_WAKEUP_EN)
+
+struct usbmisc_ops {
+	/* It's called once when probe a usb device */
+	int (*init)(struct imx_usbmisc_data *data);
+	/* It's called once after adding a usb device */
+	int (*post)(struct imx_usbmisc_data *data);
+	/* It's called when we need to enable/disable usb wakeup */
+	int (*set_wakeup)(struct imx_usbmisc_data *data, bool enabled);
+	/* It's called before setting portsc.suspendM */
+	int (*hsic_set_connect)(struct imx_usbmisc_data *data);
+	/* It's called during suspend/resume */
+	int (*hsic_set_clk)(struct imx_usbmisc_data *data, bool enabled);
+	/* usb charger detection */
+	int (*charger_detection)(struct imx_usbmisc_data *data);
+};
+
+struct imx_usbmisc {
+	void __iomem *base;
+	spinlock_t lock;
+	const struct usbmisc_ops *ops;
+};
+
+static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data);
+
+static int usbmisc_imx25_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val = 0;
+
+	if (data->index > 1)
+		return -EINVAL;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	switch (data->index) {
+	case 0:
+		val = readl(usbmisc->base);
+		val &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PP_BIT);
+		val |= (MX25_EHCI_INTERFACE_DIFF_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
+		val |= (MX25_OTG_PM_BIT | MX25_OTG_OCPOL_BIT);
+
+		/*
+		 * If the polarity is not configured assume active high for
+		 * historical reasons.
+		 */
+		if (data->oc_pol_configured && data->oc_pol_active_low)
+			val &= ~MX25_OTG_OCPOL_BIT;
+
+		writel(val, usbmisc->base);
+		break;
+	case 1:
+		val = readl(usbmisc->base);
+		val &= ~(MX25_H1_SIC_MASK | MX25_H1_PP_BIT |  MX25_H1_IPPUE_UP_BIT);
+		val |= (MX25_EHCI_INTERFACE_SINGLE_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
+		val |= (MX25_H1_PM_BIT | MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT |
+			MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT);
+
+		/*
+		 * If the polarity is not configured assume active high for
+		 * historical reasons.
+		 */
+		if (data->oc_pol_configured && data->oc_pol_active_low)
+			val &= ~MX25_H1_OCPOL_BIT;
+
+		writel(val, usbmisc->base);
+
+		break;
+	}
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return 0;
+}
+
+static int usbmisc_imx25_post(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	void __iomem *reg;
+	unsigned long flags;
+	u32 val;
+
+	if (data->index > 2)
+		return -EINVAL;
+
+	if (data->index)
+		return 0;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	reg = usbmisc->base + MX25_USB_PHY_CTRL_OFFSET;
+	val = readl(reg);
+
+	if (data->evdo)
+		val |= MX25_BM_EXTERNAL_VBUS_DIVIDER;
+	else
+		val &= ~MX25_BM_EXTERNAL_VBUS_DIVIDER;
+
+	writel(val, reg);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+	usleep_range(5000, 10000); /* needed to stabilize voltage */
+
+	return 0;
+}
+
+static int usbmisc_imx27_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val;
+
+	switch (data->index) {
+	case 0:
+		val = MX27_OTG_PM_BIT;
+		break;
+	case 1:
+		val = MX27_H1_PM_BIT;
+		break;
+	case 2:
+		val = MX27_H2_PM_BIT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	if (data->disable_oc)
+		val = readl(usbmisc->base) | val;
+	else
+		val = readl(usbmisc->base) & ~val;
+	writel(val, usbmisc->base);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return 0;
+}
+
+static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	void __iomem *reg = NULL;
+	unsigned long flags;
+	u32 val = 0;
+
+	if (data->index > 3)
+		return -EINVAL;
+
+	/* Select a 24 MHz reference clock for the PHY  */
+	val = readl(usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET);
+	val &= ~MX53_USB_PHYCTRL1_PLLDIV_MASK;
+	val |= MX53_USB_PLL_DIV_24_MHZ;
+	writel(val, usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET);
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+
+	switch (data->index) {
+	case 0:
+		if (data->disable_oc) {
+			reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
+			val = readl(reg) | MX53_BM_OVER_CUR_DIS_OTG;
+			writel(val, reg);
+		}
+		break;
+	case 1:
+		if (data->disable_oc) {
+			reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
+			val = readl(reg) | MX53_BM_OVER_CUR_DIS_H1;
+			writel(val, reg);
+		}
+		break;
+	case 2:
+		if (data->ulpi) {
+			/* set USBH2 into ULPI-mode. */
+			reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET;
+			val = readl(reg) | MX53_USB_CTRL_1_UH2_ULPI_EN;
+			/* select ULPI clock */
+			val &= ~MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK;
+			val |= MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI;
+			writel(val, reg);
+			/* Set interrupt wake up enable */
+			reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
+			val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
+				| MX53_USB_UHx_CTRL_ULPI_INT_EN;
+			writel(val, reg);
+			if (is_imx53_usbmisc(data)) {
+				/* Disable internal 60Mhz clock */
+				reg = usbmisc->base +
+					MX53_USB_CLKONOFF_CTRL_OFFSET;
+				val = readl(reg) |
+					MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF;
+				writel(val, reg);
+			}
+
+		}
+		if (data->disable_oc) {
+			reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
+			val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
+			writel(val, reg);
+		}
+		break;
+	case 3:
+		if (data->ulpi) {
+			/* set USBH3 into ULPI-mode. */
+			reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET;
+			val = readl(reg) | MX53_USB_CTRL_1_UH3_ULPI_EN;
+			/* select ULPI clock */
+			val &= ~MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK;
+			val |= MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI;
+			writel(val, reg);
+			/* Set interrupt wake up enable */
+			reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
+			val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
+				| MX53_USB_UHx_CTRL_ULPI_INT_EN;
+			writel(val, reg);
+
+			if (is_imx53_usbmisc(data)) {
+				/* Disable internal 60Mhz clock */
+				reg = usbmisc->base +
+					MX53_USB_CLKONOFF_CTRL_OFFSET;
+				val = readl(reg) |
+					MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF;
+				writel(val, reg);
+			}
+		}
+		if (data->disable_oc) {
+			reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
+			val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
+			writel(val, reg);
+		}
+		break;
+	}
+
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return 0;
+}
+
+static u32 usbmisc_wakeup_setting(struct imx_usbmisc_data *data)
+{
+	u32 wakeup_setting = MX6_USB_OTG_WAKEUP_BITS;
+
+	if (data->ext_id || data->available_role != USB_DR_MODE_OTG)
+		wakeup_setting &= ~MX6_BM_ID_WAKEUP;
+
+	if (data->ext_vbus || data->available_role == USB_DR_MODE_HOST)
+		wakeup_setting &= ~MX6_BM_VBUS_WAKEUP;
+
+	return wakeup_setting;
+}
+
+static int usbmisc_imx6q_set_wakeup
+	(struct imx_usbmisc_data *data, bool enabled)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val;
+	int ret = 0;
+
+	if (data->index > 3)
+		return -EINVAL;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + data->index * 4);
+	if (enabled) {
+		val &= ~MX6_USB_OTG_WAKEUP_BITS;
+		val |= usbmisc_wakeup_setting(data);
+	} else {
+		if (val & MX6_BM_WAKEUP_INTR)
+			pr_debug("wakeup int at ci_hdrc.%d\n", data->index);
+		val &= ~MX6_USB_OTG_WAKEUP_BITS;
+	}
+	writel(val, usbmisc->base + data->index * 4);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return ret;
+}
+
+static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 reg;
+
+	if (data->index > 3)
+		return -EINVAL;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+
+	reg = readl(usbmisc->base + data->index * 4);
+	if (data->disable_oc) {
+		reg |= MX6_BM_OVER_CUR_DIS;
+	} else {
+		reg &= ~MX6_BM_OVER_CUR_DIS;
+
+		/*
+		 * If the polarity is not configured keep it as setup by the
+		 * bootloader.
+		 */
+		if (data->oc_pol_configured && data->oc_pol_active_low)
+			reg |= MX6_BM_OVER_CUR_POLARITY;
+		else if (data->oc_pol_configured)
+			reg &= ~MX6_BM_OVER_CUR_POLARITY;
+	}
+	/* If the polarity is not set keep it as setup by the bootlader */
+	if (data->pwr_pol == 1)
+		reg |= MX6_BM_PWR_POLARITY;
+	writel(reg, usbmisc->base + data->index * 4);
+
+	/* SoC non-burst setting */
+	reg = readl(usbmisc->base + data->index * 4);
+	writel(reg | MX6_BM_NON_BURST_SETTING,
+			usbmisc->base + data->index * 4);
+
+	/* For HSIC controller */
+	if (data->hsic) {
+		reg = readl(usbmisc->base + data->index * 4);
+		writel(reg | MX6_BM_UTMI_ON_CLOCK,
+			usbmisc->base + data->index * 4);
+		reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET
+			+ (data->index - 2) * 4);
+		reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
+		writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET
+			+ (data->index - 2) * 4);
+	}
+
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	usbmisc_imx6q_set_wakeup(data, false);
+
+	return 0;
+}
+
+static int usbmisc_imx6_hsic_get_reg_offset(struct imx_usbmisc_data *data)
+{
+	int offset, ret = 0;
+
+	if (data->index == 2 || data->index == 3) {
+		offset = (data->index - 2) * 4;
+	} else if (data->index == 0) {
+		/*
+		 * For SoCs like i.MX7D and later, each USB controller has
+		 * its own non-core register region. For SoCs before i.MX7D,
+		 * the first two USB controllers are non-HSIC controllers.
+		 */
+		offset = 0;
+	} else {
+		dev_err(data->dev, "index is error for usbmisc\n");
+		ret = -EINVAL;
+	}
+
+	return ret ? ret : offset;
+}
+
+static int usbmisc_imx6_hsic_set_connect(struct imx_usbmisc_data *data)
+{
+	unsigned long flags;
+	u32 val;
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	int offset;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	offset = usbmisc_imx6_hsic_get_reg_offset(data);
+	if (offset < 0) {
+		spin_unlock_irqrestore(&usbmisc->lock, flags);
+		return offset;
+	}
+
+	val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
+	if (!(val & MX6_BM_HSIC_DEV_CONN))
+		writel(val | MX6_BM_HSIC_DEV_CONN,
+			usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
+
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return 0;
+}
+
+static int usbmisc_imx6_hsic_set_clk(struct imx_usbmisc_data *data, bool on)
+{
+	unsigned long flags;
+	u32 val;
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	int offset;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	offset = usbmisc_imx6_hsic_get_reg_offset(data);
+	if (offset < 0) {
+		spin_unlock_irqrestore(&usbmisc->lock, flags);
+		return offset;
+	}
+
+	val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
+	val |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
+	if (on)
+		val |= MX6_BM_HSIC_CLK_ON;
+	else
+		val &= ~MX6_BM_HSIC_CLK_ON;
+
+	writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return 0;
+}
+
+
+static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data)
+{
+	void __iomem *reg = NULL;
+	unsigned long flags;
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	u32 val;
+
+	usbmisc_imx6q_init(data);
+
+	if (data->index == 0 || data->index == 1) {
+		reg = usbmisc->base + MX6_USB_OTG1_PHY_CTRL + data->index * 4;
+		spin_lock_irqsave(&usbmisc->lock, flags);
+		/* Set vbus wakeup source as bvalid */
+		val = readl(reg);
+		writel(val | MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID, reg);
+		/*
+		 * Disable dp/dm wakeup in device mode when vbus is
+		 * not there.
+		 */
+		val = readl(usbmisc->base + data->index * 4);
+		writel(val & ~MX6SX_BM_DPDM_WAKEUP_EN,
+			usbmisc->base + data->index * 4);
+		spin_unlock_irqrestore(&usbmisc->lock, flags);
+	}
+
+	/* For HSIC controller */
+	if (data->hsic) {
+		val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+		val |= MX6SX_BM_HSIC_AUTO_RESUME;
+		writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+	}
+
+	return 0;
+}
+
+static int usbmisc_vf610_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	u32 reg;
+
+	/*
+	 * Vybrid only has one misc register set, but in two different
+	 * areas. These is reflected in two instances of this driver.
+	 */
+	if (data->index >= 1)
+		return -EINVAL;
+
+	if (data->disable_oc) {
+		reg = readl(usbmisc->base);
+		writel(reg | VF610_OVER_CUR_DIS, usbmisc->base);
+	}
+
+	return 0;
+}
+
+static int usbmisc_imx7d_set_wakeup
+	(struct imx_usbmisc_data *data, bool enabled)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base);
+	if (enabled) {
+		val &= ~MX6_USB_OTG_WAKEUP_BITS;
+		val |= usbmisc_wakeup_setting(data);
+		writel(val, usbmisc->base);
+	} else {
+		if (val & MX6_BM_WAKEUP_INTR)
+			dev_dbg(data->dev, "wakeup int\n");
+		writel(val & ~MX6_USB_OTG_WAKEUP_BITS, usbmisc->base);
+	}
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return 0;
+}
+
+static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 reg;
+
+	if (data->index >= 1)
+		return -EINVAL;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	reg = readl(usbmisc->base);
+	if (data->disable_oc) {
+		reg |= MX6_BM_OVER_CUR_DIS;
+	} else {
+		reg &= ~MX6_BM_OVER_CUR_DIS;
+
+		/*
+		 * If the polarity is not configured keep it as setup by the
+		 * bootloader.
+		 */
+		if (data->oc_pol_configured && data->oc_pol_active_low)
+			reg |= MX6_BM_OVER_CUR_POLARITY;
+		else if (data->oc_pol_configured)
+			reg &= ~MX6_BM_OVER_CUR_POLARITY;
+	}
+	/* If the polarity is not set keep it as setup by the bootlader */
+	if (data->pwr_pol == 1)
+		reg |= MX6_BM_PWR_POLARITY;
+	writel(reg, usbmisc->base);
+
+	/* SoC non-burst setting */
+	reg = readl(usbmisc->base);
+	writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base);
+
+	if (!data->hsic) {
+		reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+		reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
+		writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID
+			| MX7D_USBNC_AUTO_RESUME,
+			usbmisc->base + MX7D_USBNC_USB_CTRL2);
+		/* PHY tuning for signal quality */
+		reg = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
+		if (data->emp_curr_control >= 0 &&
+			data->emp_curr_control <=
+			(TXPREEMPAMPTUNE0_MASK >> TXPREEMPAMPTUNE0_BIT)) {
+			reg &= ~TXPREEMPAMPTUNE0_MASK;
+			reg |= (data->emp_curr_control << TXPREEMPAMPTUNE0_BIT);
+		}
+
+		if (data->dc_vol_level_adjust >= 0 &&
+			data->dc_vol_level_adjust <=
+			(TXVREFTUNE0_MASK >> TXVREFTUNE0_BIT)) {
+			reg &= ~TXVREFTUNE0_MASK;
+			reg |= (data->dc_vol_level_adjust << TXVREFTUNE0_BIT);
+		}
+
+		writel(reg, usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
+	}
+
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	usbmisc_imx7d_set_wakeup(data, false);
+
+	return 0;
+}
+
+static int imx7d_charger_secondary_detection(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	struct usb_phy *usb_phy = data->usb_phy;
+	int val;
+	unsigned long flags;
+
+	/* Clear VDATSRCENB0 to disable VDP_SRC and IDM_SNK required by BC 1.2 spec */
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	val &= ~MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0;
+	writel(val, usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	/* TVDMSRC_DIS */
+	msleep(20);
+
+	/* VDM_SRC is connected to D- and IDP_SINK is connected to D+ */
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 |
+			MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 |
+			MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL,
+				usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	/* TVDMSRC_ON */
+	msleep(40);
+
+	/*
+	 * Per BC 1.2, check voltage of D+:
+	 * DCP: if greater than VDAT_REF;
+	 * CDP: if less than VDAT_REF.
+	 */
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
+	if (val & MX7D_USB_OTG_PHY_STATUS_CHRGDET) {
+		dev_dbg(data->dev, "It is a dedicate charging port\n");
+		usb_phy->chg_type = DCP_TYPE;
+	} else {
+		dev_dbg(data->dev, "It is a charging downstream port\n");
+		usb_phy->chg_type = CDP_TYPE;
+	}
+
+	return 0;
+}
+
+static void imx7_disable_charger_detector(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	val &= ~(MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB |
+			MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 |
+			MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 |
+			MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL);
+	writel(val, usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+
+	/* Set OPMODE to be 2'b00 and disable its override */
+	val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	val &= ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK;
+	writel(val, usbmisc->base + MX7D_USBNC_USB_CTRL2);
+
+	val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	writel(val & ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN,
+			usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+}
+
+static int imx7d_charger_data_contact_detect(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val;
+	int i, data_pin_contact_count = 0;
+
+	/* Enable Data Contact Detect (DCD) per the USB BC 1.2 */
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB,
+			usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	for (i = 0; i < 100; i = i + 1) {
+		val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
+		if (!(val & MX7D_USB_OTG_PHY_STATUS_LINE_STATE0)) {
+			if (data_pin_contact_count++ > 5)
+				/* Data pin makes contact */
+				break;
+			usleep_range(5000, 10000);
+		} else {
+			data_pin_contact_count = 0;
+			usleep_range(5000, 6000);
+		}
+	}
+
+	/* Disable DCD after finished data contact check */
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	writel(val & ~MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB,
+			usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	if (i == 100) {
+		dev_err(data->dev,
+			"VBUS is coming from a dedicated power supply.\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static int imx7d_charger_primary_detection(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	struct usb_phy *usb_phy = data->usb_phy;
+	unsigned long flags;
+	u32 val;
+
+	/* VDP_SRC is connected to D+ and IDM_SINK is connected to D- */
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	val &= ~MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL;
+	writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 |
+			MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0,
+				usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	/* TVDPSRC_ON */
+	msleep(40);
+
+	/* Check if D- is less than VDAT_REF to determine an SDP per BC 1.2 */
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
+	if (!(val & MX7D_USB_OTG_PHY_STATUS_CHRGDET)) {
+		dev_dbg(data->dev, "It is a standard downstream port\n");
+		usb_phy->chg_type = SDP_TYPE;
+	}
+
+	return 0;
+}
+
+/*
+ * Whole charger detection process:
+ * 1. OPMODE override to be non-driving
+ * 2. Data contact check
+ * 3. Primary detection
+ * 4. Secondary detection
+ * 5. Disable charger detection
+ */
+static int imx7d_charger_detection(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	struct usb_phy *usb_phy = data->usb_phy;
+	unsigned long flags;
+	u32 val;
+	int ret;
+
+	/* Check if vbus is valid */
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
+	if (!(val & MX7D_USB_OTG_PHY_STATUS_VBUS_VLD)) {
+		dev_err(data->dev, "vbus is error\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Keep OPMODE to be non-driving mode during the whole
+	 * charger detection process.
+	 */
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	val &= ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK;
+	val |= MX7D_USBNC_USB_CTRL2_OPMODE_NON_DRIVING;
+	writel(val, usbmisc->base + MX7D_USBNC_USB_CTRL2);
+
+	val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	writel(val | MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN,
+			usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	ret = imx7d_charger_data_contact_detect(data);
+	if (ret)
+		return ret;
+
+	ret = imx7d_charger_primary_detection(data);
+	if (!ret && usb_phy->chg_type != SDP_TYPE)
+		ret = imx7d_charger_secondary_detection(data);
+
+	imx7_disable_charger_detector(data);
+
+	return ret;
+}
+
+static int usbmisc_imx7ulp_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 reg;
+
+	if (data->index >= 1)
+		return -EINVAL;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	reg = readl(usbmisc->base);
+	if (data->disable_oc) {
+		reg |= MX6_BM_OVER_CUR_DIS;
+	} else {
+		reg &= ~MX6_BM_OVER_CUR_DIS;
+
+		/*
+		 * If the polarity is not configured keep it as setup by the
+		 * bootloader.
+		 */
+		if (data->oc_pol_configured && data->oc_pol_active_low)
+			reg |= MX6_BM_OVER_CUR_POLARITY;
+		else if (data->oc_pol_configured)
+			reg &= ~MX6_BM_OVER_CUR_POLARITY;
+	}
+	/* If the polarity is not set keep it as setup by the bootlader */
+	if (data->pwr_pol == 1)
+		reg |= MX6_BM_PWR_POLARITY;
+
+	writel(reg, usbmisc->base);
+
+	/* SoC non-burst setting */
+	reg = readl(usbmisc->base);
+	writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base);
+
+	if (data->hsic) {
+		reg = readl(usbmisc->base);
+		writel(reg | MX6_BM_UTMI_ON_CLOCK, usbmisc->base);
+
+		reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+		reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
+		writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+
+		/*
+		 * For non-HSIC controller, the autoresume is enabled
+		 * at MXS PHY driver (usbphy_ctrl bit18).
+		 */
+		reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+		writel(reg | MX7D_USBNC_AUTO_RESUME,
+			usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	} else {
+		reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+		reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
+		writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID,
+			 usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	}
+
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	usbmisc_imx7d_set_wakeup(data, false);
+
+	return 0;
+}
+
+static const struct usbmisc_ops imx25_usbmisc_ops = {
+	.init = usbmisc_imx25_init,
+	.post = usbmisc_imx25_post,
+};
+
+static const struct usbmisc_ops imx27_usbmisc_ops = {
+	.init = usbmisc_imx27_init,
+};
+
+static const struct usbmisc_ops imx51_usbmisc_ops = {
+	.init = usbmisc_imx53_init,
+};
+
+static const struct usbmisc_ops imx53_usbmisc_ops = {
+	.init = usbmisc_imx53_init,
+};
+
+static const struct usbmisc_ops imx6q_usbmisc_ops = {
+	.set_wakeup = usbmisc_imx6q_set_wakeup,
+	.init = usbmisc_imx6q_init,
+	.hsic_set_connect = usbmisc_imx6_hsic_set_connect,
+	.hsic_set_clk   = usbmisc_imx6_hsic_set_clk,
+};
+
+static const struct usbmisc_ops vf610_usbmisc_ops = {
+	.init = usbmisc_vf610_init,
+};
+
+static const struct usbmisc_ops imx6sx_usbmisc_ops = {
+	.set_wakeup = usbmisc_imx6q_set_wakeup,
+	.init = usbmisc_imx6sx_init,
+	.hsic_set_connect = usbmisc_imx6_hsic_set_connect,
+	.hsic_set_clk = usbmisc_imx6_hsic_set_clk,
+};
+
+static const struct usbmisc_ops imx7d_usbmisc_ops = {
+	.init = usbmisc_imx7d_init,
+	.set_wakeup = usbmisc_imx7d_set_wakeup,
+	.charger_detection = imx7d_charger_detection,
+};
+
+static const struct usbmisc_ops imx7ulp_usbmisc_ops = {
+	.init = usbmisc_imx7ulp_init,
+	.set_wakeup = usbmisc_imx7d_set_wakeup,
+	.hsic_set_connect = usbmisc_imx6_hsic_set_connect,
+	.hsic_set_clk = usbmisc_imx6_hsic_set_clk,
+};
+
+static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+
+	return usbmisc->ops == &imx53_usbmisc_ops;
+}
+
+int imx_usbmisc_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc;
+
+	if (!data)
+		return 0;
+
+	usbmisc = dev_get_drvdata(data->dev);
+	if (!usbmisc->ops->init)
+		return 0;
+	return usbmisc->ops->init(data);
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_init);
+
+int imx_usbmisc_init_post(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc;
+
+	if (!data)
+		return 0;
+
+	usbmisc = dev_get_drvdata(data->dev);
+	if (!usbmisc->ops->post)
+		return 0;
+	return usbmisc->ops->post(data);
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_init_post);
+
+int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled)
+{
+	struct imx_usbmisc *usbmisc;
+
+	if (!data)
+		return 0;
+
+	usbmisc = dev_get_drvdata(data->dev);
+	if (!usbmisc->ops->set_wakeup)
+		return 0;
+	return usbmisc->ops->set_wakeup(data, enabled);
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_set_wakeup);
+
+int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc;
+
+	if (!data)
+		return 0;
+
+	usbmisc = dev_get_drvdata(data->dev);
+	if (!usbmisc->ops->hsic_set_connect || !data->hsic)
+		return 0;
+	return usbmisc->ops->hsic_set_connect(data);
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_connect);
+
+int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on)
+{
+	struct imx_usbmisc *usbmisc;
+
+	if (!data)
+		return 0;
+
+	usbmisc = dev_get_drvdata(data->dev);
+	if (!usbmisc->ops->hsic_set_clk || !data->hsic)
+		return 0;
+	return usbmisc->ops->hsic_set_clk(data, on);
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_clk);
+
+int imx_usbmisc_charger_detection(struct imx_usbmisc_data *data, bool connect)
+{
+	struct imx_usbmisc *usbmisc;
+	struct usb_phy *usb_phy;
+	int ret = 0;
+
+	if (!data)
+		return -EINVAL;
+
+	usbmisc = dev_get_drvdata(data->dev);
+	usb_phy = data->usb_phy;
+	if (!usbmisc->ops->charger_detection)
+		return -ENOTSUPP;
+
+	if (connect) {
+		ret = usbmisc->ops->charger_detection(data);
+		if (ret) {
+			dev_err(data->dev,
+					"Error occurs during detection: %d\n",
+					ret);
+			usb_phy->chg_state = USB_CHARGER_ABSENT;
+		} else {
+			usb_phy->chg_state = USB_CHARGER_PRESENT;
+		}
+	} else {
+		usb_phy->chg_state = USB_CHARGER_ABSENT;
+		usb_phy->chg_type = UNKNOWN_TYPE;
+	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_charger_detection);
+
+static const struct of_device_id usbmisc_imx_dt_ids[] = {
+	{
+		.compatible = "fsl,imx25-usbmisc",
+		.data = &imx25_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx35-usbmisc",
+		.data = &imx25_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx27-usbmisc",
+		.data = &imx27_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx51-usbmisc",
+		.data = &imx51_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx53-usbmisc",
+		.data = &imx53_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx6q-usbmisc",
+		.data = &imx6q_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,vf610-usbmisc",
+		.data = &vf610_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx6sx-usbmisc",
+		.data = &imx6sx_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx6ul-usbmisc",
+		.data = &imx6sx_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx7d-usbmisc",
+		.data = &imx7d_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx7ulp-usbmisc",
+		.data = &imx7ulp_usbmisc_ops,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
+
+static int usbmisc_imx_probe(struct platform_device *pdev)
+{
+	struct imx_usbmisc *data;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spin_lock_init(&data->lock);
+
+	data->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(data->base))
+		return PTR_ERR(data->base);
+
+	data->ops = of_device_get_match_data(&pdev->dev);
+	platform_set_drvdata(pdev, data);
+
+	return 0;
+}
+
+static int usbmisc_imx_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver usbmisc_imx_driver = {
+	.probe = usbmisc_imx_probe,
+	.remove = usbmisc_imx_remove,
+	.driver = {
+		.name = "usbmisc_imx",
+		.of_match_table = usbmisc_imx_dt_ids,
+	 },
+};
+
+module_platform_driver(usbmisc_imx_driver);
+
+MODULE_ALIAS("platform:usbmisc-imx");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for imx usb non-core registers");
+MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig
new file mode 100644
index 000000000..d3f5162bd
--- /dev/null
+++ b/drivers/usb/class/Kconfig
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Class driver configuration
+#
+comment "USB Device Class drivers"
+
+config USB_ACM
+	tristate "USB Modem (CDC ACM) support"
+	depends on TTY
+	help
+	  This driver supports USB modems and ISDN adapters which support the
+	  Communication Device Class Abstract Control Model interface.
+	  Please read <file:Documentation/usb/acm.rst> for details.
+
+	  If your modem only reports "Cls=ff(vend.)" in the descriptors in
+	  /sys/kernel/debug/usb/devices, then your modem will not work with this
+	  driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cdc-acm.
+
+config USB_PRINTER
+	tristate "USB Printer support"
+	help
+	  Say Y here if you want to connect a USB printer to your computer's
+	  USB port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usblp.
+
+config USB_WDM
+	tristate "USB Wireless Device Management support"
+	help
+	  This driver supports the WMC Device Management functionality
+	  of cell phones compliant to the CDC WMC specification. You can use
+	  AT commands over this device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cdc-wdm.
+
+config USB_TMC
+	tristate "USB Test and Measurement Class support"
+	help
+	  Say Y here if you want to connect a USB device that follows
+	  the USB.org specification for USB Test and Measurement devices
+	  to your computer's USB port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbtmc.
diff --git a/drivers/usb/class/Makefile b/drivers/usb/class/Makefile
new file mode 100644
index 000000000..5d393a28f
--- /dev/null
+++ b/drivers/usb/class/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for USB Class drivers
+# (one step up from the misc category)
+#
+
+obj-$(CONFIG_USB_ACM)		+= cdc-acm.o
+obj-$(CONFIG_USB_PRINTER)	+= usblp.o
+obj-$(CONFIG_USB_WDM)		+= cdc-wdm.o
+obj-$(CONFIG_USB_TMC)		+= usbtmc.o
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
new file mode 100644
index 000000000..2a7eea4e2
--- /dev/null
+++ b/drivers/usb/class/cdc-acm.c
@@ -0,0 +1,2089 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * cdc-acm.c
+ *
+ * Copyright (c) 1999 Armin Fuerst	<fuerst@in.tum.de>
+ * Copyright (c) 1999 Pavel Machek	<pavel@ucw.cz>
+ * Copyright (c) 1999 Johannes Erdfelt	<johannes@erdfelt.com>
+ * Copyright (c) 2000 Vojtech Pavlik	<vojtech@suse.cz>
+ * Copyright (c) 2004 Oliver Neukum	<oliver@neukum.name>
+ * Copyright (c) 2005 David Kubicek	<dave@awk.cz>
+ * Copyright (c) 2011 Johan Hovold	<jhovold@gmail.com>
+ *
+ * USB Abstract Control Model driver for USB modems and ISDN adapters
+ *
+ * Sponsored by SuSE
+ */
+
+#undef DEBUG
+#undef VERBOSE_DEBUG
+
+#include <linux/kernel.h>
+#include <linux/sched/signal.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/log2.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+#include <linux/idr.h>
+#include <linux/list.h>
+
+#include "cdc-acm.h"
+
+
+#define DRIVER_AUTHOR "Armin Fuerst, Pavel Machek, Johannes Erdfelt, Vojtech Pavlik, David Kubicek, Johan Hovold"
+#define DRIVER_DESC "USB Abstract Control Model driver for USB modems and ISDN adapters"
+
+static struct usb_driver acm_driver;
+static struct tty_driver *acm_tty_driver;
+
+static DEFINE_IDR(acm_minors);
+static DEFINE_MUTEX(acm_minors_lock);
+
+static void acm_tty_set_termios(struct tty_struct *tty,
+				const struct ktermios *termios_old);
+
+/*
+ * acm_minors accessors
+ */
+
+/*
+ * Look up an ACM structure by minor. If found and not disconnected, increment
+ * its refcount and return it with its mutex held.
+ */
+static struct acm *acm_get_by_minor(unsigned int minor)
+{
+	struct acm *acm;
+
+	mutex_lock(&acm_minors_lock);
+	acm = idr_find(&acm_minors, minor);
+	if (acm) {
+		mutex_lock(&acm->mutex);
+		if (acm->disconnected) {
+			mutex_unlock(&acm->mutex);
+			acm = NULL;
+		} else {
+			tty_port_get(&acm->port);
+			mutex_unlock(&acm->mutex);
+		}
+	}
+	mutex_unlock(&acm_minors_lock);
+	return acm;
+}
+
+/*
+ * Try to find an available minor number and if found, associate it with 'acm'.
+ */
+static int acm_alloc_minor(struct acm *acm)
+{
+	int minor;
+
+	mutex_lock(&acm_minors_lock);
+	minor = idr_alloc(&acm_minors, acm, 0, ACM_TTY_MINORS, GFP_KERNEL);
+	mutex_unlock(&acm_minors_lock);
+
+	return minor;
+}
+
+/* Release the minor number associated with 'acm'.  */
+static void acm_release_minor(struct acm *acm)
+{
+	mutex_lock(&acm_minors_lock);
+	idr_remove(&acm_minors, acm->minor);
+	mutex_unlock(&acm_minors_lock);
+}
+
+/*
+ * Functions for ACM control messages.
+ */
+
+static int acm_ctrl_msg(struct acm *acm, int request, int value,
+							void *buf, int len)
+{
+	int retval;
+
+	retval = usb_autopm_get_interface(acm->control);
+	if (retval)
+		return retval;
+
+	retval = usb_control_msg(acm->dev, usb_sndctrlpipe(acm->dev, 0),
+		request, USB_RT_ACM, value,
+		acm->control->altsetting[0].desc.bInterfaceNumber,
+		buf, len, USB_CTRL_SET_TIMEOUT);
+
+	dev_dbg(&acm->control->dev,
+		"%s - rq 0x%02x, val %#x, len %#x, result %d\n",
+		__func__, request, value, len, retval);
+
+	usb_autopm_put_interface(acm->control);
+
+	return retval < 0 ? retval : 0;
+}
+
+/* devices aren't required to support these requests.
+ * the cdc acm descriptor tells whether they do...
+ */
+static inline int acm_set_control(struct acm *acm, int control)
+{
+	if (acm->quirks & QUIRK_CONTROL_LINE_STATE)
+		return -EOPNOTSUPP;
+
+	return acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE,
+			control, NULL, 0);
+}
+
+#define acm_set_line(acm, line) \
+	acm_ctrl_msg(acm, USB_CDC_REQ_SET_LINE_CODING, 0, line, sizeof *(line))
+#define acm_send_break(acm, ms) \
+	acm_ctrl_msg(acm, USB_CDC_REQ_SEND_BREAK, ms, NULL, 0)
+
+static void acm_poison_urbs(struct acm *acm)
+{
+	int i;
+
+	usb_poison_urb(acm->ctrlurb);
+	for (i = 0; i < ACM_NW; i++)
+		usb_poison_urb(acm->wb[i].urb);
+	for (i = 0; i < acm->rx_buflimit; i++)
+		usb_poison_urb(acm->read_urbs[i]);
+}
+
+static void acm_unpoison_urbs(struct acm *acm)
+{
+	int i;
+
+	for (i = 0; i < acm->rx_buflimit; i++)
+		usb_unpoison_urb(acm->read_urbs[i]);
+	for (i = 0; i < ACM_NW; i++)
+		usb_unpoison_urb(acm->wb[i].urb);
+	usb_unpoison_urb(acm->ctrlurb);
+}
+
+
+/*
+ * Write buffer management.
+ * All of these assume proper locks taken by the caller.
+ */
+
+static int acm_wb_alloc(struct acm *acm)
+{
+	int i, wbn;
+	struct acm_wb *wb;
+
+	wbn = 0;
+	i = 0;
+	for (;;) {
+		wb = &acm->wb[wbn];
+		if (!wb->use) {
+			wb->use = true;
+			wb->len = 0;
+			return wbn;
+		}
+		wbn = (wbn + 1) % ACM_NW;
+		if (++i >= ACM_NW)
+			return -1;
+	}
+}
+
+static int acm_wb_is_avail(struct acm *acm)
+{
+	int i, n;
+	unsigned long flags;
+
+	n = ACM_NW;
+	spin_lock_irqsave(&acm->write_lock, flags);
+	for (i = 0; i < ACM_NW; i++)
+		if(acm->wb[i].use)
+			n--;
+	spin_unlock_irqrestore(&acm->write_lock, flags);
+	return n;
+}
+
+/*
+ * Finish write. Caller must hold acm->write_lock
+ */
+static void acm_write_done(struct acm *acm, struct acm_wb *wb)
+{
+	wb->use = false;
+	acm->transmitting--;
+	usb_autopm_put_interface_async(acm->control);
+}
+
+/*
+ * Poke write.
+ *
+ * the caller is responsible for locking
+ */
+
+static int acm_start_wb(struct acm *acm, struct acm_wb *wb)
+{
+	int rc;
+
+	acm->transmitting++;
+
+	wb->urb->transfer_buffer = wb->buf;
+	wb->urb->transfer_dma = wb->dmah;
+	wb->urb->transfer_buffer_length = wb->len;
+	wb->urb->dev = acm->dev;
+
+	rc = usb_submit_urb(wb->urb, GFP_ATOMIC);
+	if (rc < 0) {
+		if (rc != -EPERM)
+			dev_err(&acm->data->dev,
+				"%s - usb_submit_urb(write bulk) failed: %d\n",
+				__func__, rc);
+		acm_write_done(acm, wb);
+	}
+	return rc;
+}
+
+/*
+ * attributes exported through sysfs
+ */
+static ssize_t bmCapabilities_show
+(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct acm *acm = usb_get_intfdata(intf);
+
+	return sprintf(buf, "%d", acm->ctrl_caps);
+}
+static DEVICE_ATTR_RO(bmCapabilities);
+
+static ssize_t wCountryCodes_show
+(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct acm *acm = usb_get_intfdata(intf);
+
+	memcpy(buf, acm->country_codes, acm->country_code_size);
+	return acm->country_code_size;
+}
+
+static DEVICE_ATTR_RO(wCountryCodes);
+
+static ssize_t iCountryCodeRelDate_show
+(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct acm *acm = usb_get_intfdata(intf);
+
+	return sprintf(buf, "%d", acm->country_rel_date);
+}
+
+static DEVICE_ATTR_RO(iCountryCodeRelDate);
+/*
+ * Interrupt handlers for various ACM device responses
+ */
+
+static void acm_process_notification(struct acm *acm, unsigned char *buf)
+{
+	int newctrl;
+	int difference;
+	unsigned long flags;
+	struct usb_cdc_notification *dr = (struct usb_cdc_notification *)buf;
+	unsigned char *data = buf + sizeof(struct usb_cdc_notification);
+
+	switch (dr->bNotificationType) {
+	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+		dev_dbg(&acm->control->dev,
+			"%s - network connection: %d\n", __func__, dr->wValue);
+		break;
+
+	case USB_CDC_NOTIFY_SERIAL_STATE:
+		if (le16_to_cpu(dr->wLength) != 2) {
+			dev_dbg(&acm->control->dev,
+				"%s - malformed serial state\n", __func__);
+			break;
+		}
+
+		newctrl = get_unaligned_le16(data);
+		dev_dbg(&acm->control->dev,
+			"%s - serial state: 0x%x\n", __func__, newctrl);
+
+		if (!acm->clocal && (acm->ctrlin & ~newctrl & USB_CDC_SERIAL_STATE_DCD)) {
+			dev_dbg(&acm->control->dev,
+				"%s - calling hangup\n", __func__);
+			tty_port_tty_hangup(&acm->port, false);
+		}
+
+		difference = acm->ctrlin ^ newctrl;
+		spin_lock_irqsave(&acm->read_lock, flags);
+		acm->ctrlin = newctrl;
+		acm->oldcount = acm->iocount;
+
+		if (difference & USB_CDC_SERIAL_STATE_DSR)
+			acm->iocount.dsr++;
+		if (difference & USB_CDC_SERIAL_STATE_DCD)
+			acm->iocount.dcd++;
+		if (newctrl & USB_CDC_SERIAL_STATE_BREAK) {
+			acm->iocount.brk++;
+			tty_insert_flip_char(&acm->port, 0, TTY_BREAK);
+		}
+		if (newctrl & USB_CDC_SERIAL_STATE_RING_SIGNAL)
+			acm->iocount.rng++;
+		if (newctrl & USB_CDC_SERIAL_STATE_FRAMING)
+			acm->iocount.frame++;
+		if (newctrl & USB_CDC_SERIAL_STATE_PARITY)
+			acm->iocount.parity++;
+		if (newctrl & USB_CDC_SERIAL_STATE_OVERRUN)
+			acm->iocount.overrun++;
+		spin_unlock_irqrestore(&acm->read_lock, flags);
+
+		if (newctrl & USB_CDC_SERIAL_STATE_BREAK)
+			tty_flip_buffer_push(&acm->port);
+
+		if (difference)
+			wake_up_all(&acm->wioctl);
+
+		break;
+
+	default:
+		dev_dbg(&acm->control->dev,
+			"%s - unknown notification %d received: index %d len %d\n",
+			__func__,
+			dr->bNotificationType, dr->wIndex, dr->wLength);
+	}
+}
+
+/* control interface reports status changes with "interrupt" transfers */
+static void acm_ctrl_irq(struct urb *urb)
+{
+	struct acm *acm = urb->context;
+	struct usb_cdc_notification *dr = urb->transfer_buffer;
+	unsigned int current_size = urb->actual_length;
+	unsigned int expected_size, copy_size, alloc_size;
+	int retval;
+	int status = urb->status;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&acm->control->dev,
+			"%s - urb shutting down with status: %d\n",
+			__func__, status);
+		return;
+	default:
+		dev_dbg(&acm->control->dev,
+			"%s - nonzero urb status received: %d\n",
+			__func__, status);
+		goto exit;
+	}
+
+	usb_mark_last_busy(acm->dev);
+
+	if (acm->nb_index)
+		dr = (struct usb_cdc_notification *)acm->notification_buffer;
+
+	/* size = notification-header + (optional) data */
+	expected_size = sizeof(struct usb_cdc_notification) +
+					le16_to_cpu(dr->wLength);
+
+	if (current_size < expected_size) {
+		/* notification is transmitted fragmented, reassemble */
+		if (acm->nb_size < expected_size) {
+			u8 *new_buffer;
+			alloc_size = roundup_pow_of_two(expected_size);
+			/* Final freeing is done on disconnect. */
+			new_buffer = krealloc(acm->notification_buffer,
+					      alloc_size, GFP_ATOMIC);
+			if (!new_buffer) {
+				acm->nb_index = 0;
+				goto exit;
+			}
+
+			acm->notification_buffer = new_buffer;
+			acm->nb_size = alloc_size;
+			dr = (struct usb_cdc_notification *)acm->notification_buffer;
+		}
+
+		copy_size = min(current_size,
+				expected_size - acm->nb_index);
+
+		memcpy(&acm->notification_buffer[acm->nb_index],
+		       urb->transfer_buffer, copy_size);
+		acm->nb_index += copy_size;
+		current_size = acm->nb_index;
+	}
+
+	if (current_size >= expected_size) {
+		/* notification complete */
+		acm_process_notification(acm, (unsigned char *)dr);
+		acm->nb_index = 0;
+	}
+
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval && retval != -EPERM && retval != -ENODEV)
+		dev_err(&acm->control->dev,
+			"%s - usb_submit_urb failed: %d\n", __func__, retval);
+	else
+		dev_vdbg(&acm->control->dev,
+			"control resubmission terminated %d\n", retval);
+}
+
+static int acm_submit_read_urb(struct acm *acm, int index, gfp_t mem_flags)
+{
+	int res;
+
+	if (!test_and_clear_bit(index, &acm->read_urbs_free))
+		return 0;
+
+	res = usb_submit_urb(acm->read_urbs[index], mem_flags);
+	if (res) {
+		if (res != -EPERM && res != -ENODEV) {
+			dev_err(&acm->data->dev,
+				"urb %d failed submission with %d\n",
+				index, res);
+		} else {
+			dev_vdbg(&acm->data->dev, "intended failure %d\n", res);
+		}
+		set_bit(index, &acm->read_urbs_free);
+		return res;
+	} else {
+		dev_vdbg(&acm->data->dev, "submitted urb %d\n", index);
+	}
+
+	return 0;
+}
+
+static int acm_submit_read_urbs(struct acm *acm, gfp_t mem_flags)
+{
+	int res;
+	int i;
+
+	for (i = 0; i < acm->rx_buflimit; ++i) {
+		res = acm_submit_read_urb(acm, i, mem_flags);
+		if (res)
+			return res;
+	}
+
+	return 0;
+}
+
+static void acm_process_read_urb(struct acm *acm, struct urb *urb)
+{
+	unsigned long flags;
+
+	if (!urb->actual_length)
+		return;
+
+	spin_lock_irqsave(&acm->read_lock, flags);
+	tty_insert_flip_string(&acm->port, urb->transfer_buffer,
+			urb->actual_length);
+	spin_unlock_irqrestore(&acm->read_lock, flags);
+
+	tty_flip_buffer_push(&acm->port);
+}
+
+static void acm_read_bulk_callback(struct urb *urb)
+{
+	struct acm_rb *rb = urb->context;
+	struct acm *acm = rb->instance;
+	int status = urb->status;
+	bool stopped = false;
+	bool stalled = false;
+	bool cooldown = false;
+
+	dev_vdbg(&acm->data->dev, "got urb %d, len %d, status %d\n",
+		rb->index, urb->actual_length, status);
+
+	switch (status) {
+	case 0:
+		usb_mark_last_busy(acm->dev);
+		acm_process_read_urb(acm, urb);
+		break;
+	case -EPIPE:
+		set_bit(EVENT_RX_STALL, &acm->flags);
+		stalled = true;
+		break;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		dev_dbg(&acm->data->dev,
+			"%s - urb shutting down with status: %d\n",
+			__func__, status);
+		stopped = true;
+		break;
+	case -EOVERFLOW:
+	case -EPROTO:
+		dev_dbg(&acm->data->dev,
+			"%s - cooling babbling device\n", __func__);
+		usb_mark_last_busy(acm->dev);
+		set_bit(rb->index, &acm->urbs_in_error_delay);
+		set_bit(ACM_ERROR_DELAY, &acm->flags);
+		cooldown = true;
+		break;
+	default:
+		dev_dbg(&acm->data->dev,
+			"%s - nonzero urb status received: %d\n",
+			__func__, status);
+		break;
+	}
+
+	/*
+	 * Make sure URB processing is done before marking as free to avoid
+	 * racing with unthrottle() on another CPU. Matches the barriers
+	 * implied by the test_and_clear_bit() in acm_submit_read_urb().
+	 */
+	smp_mb__before_atomic();
+	set_bit(rb->index, &acm->read_urbs_free);
+	/*
+	 * Make sure URB is marked as free before checking the throttled flag
+	 * to avoid racing with unthrottle() on another CPU. Matches the
+	 * smp_mb() in unthrottle().
+	 */
+	smp_mb__after_atomic();
+
+	if (stopped || stalled || cooldown) {
+		if (stalled)
+			schedule_delayed_work(&acm->dwork, 0);
+		else if (cooldown)
+			schedule_delayed_work(&acm->dwork, HZ / 2);
+		return;
+	}
+
+	if (test_bit(ACM_THROTTLED, &acm->flags))
+		return;
+
+	acm_submit_read_urb(acm, rb->index, GFP_ATOMIC);
+}
+
+/* data interface wrote those outgoing bytes */
+static void acm_write_bulk(struct urb *urb)
+{
+	struct acm_wb *wb = urb->context;
+	struct acm *acm = wb->instance;
+	unsigned long flags;
+	int status = urb->status;
+
+	if (status || (urb->actual_length != urb->transfer_buffer_length))
+		dev_vdbg(&acm->data->dev, "wrote len %d/%d, status %d\n",
+			urb->actual_length,
+			urb->transfer_buffer_length,
+			status);
+
+	spin_lock_irqsave(&acm->write_lock, flags);
+	acm_write_done(acm, wb);
+	spin_unlock_irqrestore(&acm->write_lock, flags);
+	set_bit(EVENT_TTY_WAKEUP, &acm->flags);
+	schedule_delayed_work(&acm->dwork, 0);
+}
+
+static void acm_softint(struct work_struct *work)
+{
+	int i;
+	struct acm *acm = container_of(work, struct acm, dwork.work);
+
+	if (test_bit(EVENT_RX_STALL, &acm->flags)) {
+		smp_mb(); /* against acm_suspend() */
+		if (!acm->susp_count) {
+			for (i = 0; i < acm->rx_buflimit; i++)
+				usb_kill_urb(acm->read_urbs[i]);
+			usb_clear_halt(acm->dev, acm->in);
+			acm_submit_read_urbs(acm, GFP_KERNEL);
+			clear_bit(EVENT_RX_STALL, &acm->flags);
+		}
+	}
+
+	if (test_and_clear_bit(ACM_ERROR_DELAY, &acm->flags)) {
+		for (i = 0; i < acm->rx_buflimit; i++)
+			if (test_and_clear_bit(i, &acm->urbs_in_error_delay))
+				acm_submit_read_urb(acm, i, GFP_KERNEL);
+	}
+
+	if (test_and_clear_bit(EVENT_TTY_WAKEUP, &acm->flags))
+		tty_port_tty_wakeup(&acm->port);
+}
+
+/*
+ * TTY handlers
+ */
+
+static int acm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+	struct acm *acm;
+	int retval;
+
+	acm = acm_get_by_minor(tty->index);
+	if (!acm)
+		return -ENODEV;
+
+	retval = tty_standard_install(driver, tty);
+	if (retval)
+		goto error_init_termios;
+
+	/*
+	 * Suppress initial echoing for some devices which might send data
+	 * immediately after acm driver has been installed.
+	 */
+	if (acm->quirks & DISABLE_ECHO)
+		tty->termios.c_lflag &= ~ECHO;
+
+	tty->driver_data = acm;
+
+	return 0;
+
+error_init_termios:
+	tty_port_put(&acm->port);
+	return retval;
+}
+
+static int acm_tty_open(struct tty_struct *tty, struct file *filp)
+{
+	struct acm *acm = tty->driver_data;
+
+	return tty_port_open(&acm->port, tty, filp);
+}
+
+static void acm_port_dtr_rts(struct tty_port *port, int raise)
+{
+	struct acm *acm = container_of(port, struct acm, port);
+	int val;
+	int res;
+
+	if (raise)
+		val = USB_CDC_CTRL_DTR | USB_CDC_CTRL_RTS;
+	else
+		val = 0;
+
+	/* FIXME: add missing ctrlout locking throughout driver */
+	acm->ctrlout = val;
+
+	res = acm_set_control(acm, val);
+	if (res && (acm->ctrl_caps & USB_CDC_CAP_LINE))
+		/* This is broken in too many devices to spam the logs */
+		dev_dbg(&acm->control->dev, "failed to set dtr/rts\n");
+}
+
+static int acm_port_activate(struct tty_port *port, struct tty_struct *tty)
+{
+	struct acm *acm = container_of(port, struct acm, port);
+	int retval = -ENODEV;
+	int i;
+
+	mutex_lock(&acm->mutex);
+	if (acm->disconnected)
+		goto disconnected;
+
+	retval = usb_autopm_get_interface(acm->control);
+	if (retval)
+		goto error_get_interface;
+
+	set_bit(TTY_NO_WRITE_SPLIT, &tty->flags);
+	acm->control->needs_remote_wakeup = 1;
+
+	acm->ctrlurb->dev = acm->dev;
+	retval = usb_submit_urb(acm->ctrlurb, GFP_KERNEL);
+	if (retval) {
+		dev_err(&acm->control->dev,
+			"%s - usb_submit_urb(ctrl irq) failed\n", __func__);
+		goto error_submit_urb;
+	}
+
+	acm_tty_set_termios(tty, NULL);
+
+	/*
+	 * Unthrottle device in case the TTY was closed while throttled.
+	 */
+	clear_bit(ACM_THROTTLED, &acm->flags);
+
+	retval = acm_submit_read_urbs(acm, GFP_KERNEL);
+	if (retval)
+		goto error_submit_read_urbs;
+
+	usb_autopm_put_interface(acm->control);
+
+	mutex_unlock(&acm->mutex);
+
+	return 0;
+
+error_submit_read_urbs:
+	for (i = 0; i < acm->rx_buflimit; i++)
+		usb_kill_urb(acm->read_urbs[i]);
+	usb_kill_urb(acm->ctrlurb);
+error_submit_urb:
+	usb_autopm_put_interface(acm->control);
+error_get_interface:
+disconnected:
+	mutex_unlock(&acm->mutex);
+
+	return usb_translate_errors(retval);
+}
+
+static void acm_port_destruct(struct tty_port *port)
+{
+	struct acm *acm = container_of(port, struct acm, port);
+
+	if (acm->minor != ACM_MINOR_INVALID)
+		acm_release_minor(acm);
+	usb_put_intf(acm->control);
+	kfree(acm->country_codes);
+	kfree(acm);
+}
+
+static void acm_port_shutdown(struct tty_port *port)
+{
+	struct acm *acm = container_of(port, struct acm, port);
+	struct urb *urb;
+	struct acm_wb *wb;
+
+	/*
+	 * Need to grab write_lock to prevent race with resume, but no need to
+	 * hold it due to the tty-port initialised flag.
+	 */
+	acm_poison_urbs(acm);
+	spin_lock_irq(&acm->write_lock);
+	spin_unlock_irq(&acm->write_lock);
+
+	usb_autopm_get_interface_no_resume(acm->control);
+	acm->control->needs_remote_wakeup = 0;
+	usb_autopm_put_interface(acm->control);
+
+	for (;;) {
+		urb = usb_get_from_anchor(&acm->delayed);
+		if (!urb)
+			break;
+		wb = urb->context;
+		wb->use = false;
+		usb_autopm_put_interface_async(acm->control);
+	}
+
+	acm_unpoison_urbs(acm);
+
+}
+
+static void acm_tty_cleanup(struct tty_struct *tty)
+{
+	struct acm *acm = tty->driver_data;
+
+	tty_port_put(&acm->port);
+}
+
+static void acm_tty_hangup(struct tty_struct *tty)
+{
+	struct acm *acm = tty->driver_data;
+
+	tty_port_hangup(&acm->port);
+}
+
+static void acm_tty_close(struct tty_struct *tty, struct file *filp)
+{
+	struct acm *acm = tty->driver_data;
+
+	tty_port_close(&acm->port, tty, filp);
+}
+
+static int acm_tty_write(struct tty_struct *tty,
+					const unsigned char *buf, int count)
+{
+	struct acm *acm = tty->driver_data;
+	int stat;
+	unsigned long flags;
+	int wbn;
+	struct acm_wb *wb;
+
+	if (!count)
+		return 0;
+
+	dev_vdbg(&acm->data->dev, "%d bytes from tty layer\n", count);
+
+	spin_lock_irqsave(&acm->write_lock, flags);
+	wbn = acm_wb_alloc(acm);
+	if (wbn < 0) {
+		spin_unlock_irqrestore(&acm->write_lock, flags);
+		return 0;
+	}
+	wb = &acm->wb[wbn];
+
+	if (!acm->dev) {
+		wb->use = false;
+		spin_unlock_irqrestore(&acm->write_lock, flags);
+		return -ENODEV;
+	}
+
+	count = (count > acm->writesize) ? acm->writesize : count;
+	dev_vdbg(&acm->data->dev, "writing %d bytes\n", count);
+	memcpy(wb->buf, buf, count);
+	wb->len = count;
+
+	stat = usb_autopm_get_interface_async(acm->control);
+	if (stat) {
+		wb->use = false;
+		spin_unlock_irqrestore(&acm->write_lock, flags);
+		return stat;
+	}
+
+	if (acm->susp_count) {
+		usb_anchor_urb(wb->urb, &acm->delayed);
+		spin_unlock_irqrestore(&acm->write_lock, flags);
+		return count;
+	}
+
+	stat = acm_start_wb(acm, wb);
+	spin_unlock_irqrestore(&acm->write_lock, flags);
+
+	if (stat < 0)
+		return stat;
+	return count;
+}
+
+static unsigned int acm_tty_write_room(struct tty_struct *tty)
+{
+	struct acm *acm = tty->driver_data;
+	/*
+	 * Do not let the line discipline to know that we have a reserve,
+	 * or it might get too enthusiastic.
+	 */
+	return acm_wb_is_avail(acm) ? acm->writesize : 0;
+}
+
+static unsigned int acm_tty_chars_in_buffer(struct tty_struct *tty)
+{
+	struct acm *acm = tty->driver_data;
+	/*
+	 * if the device was unplugged then any remaining characters fell out
+	 * of the connector ;)
+	 */
+	if (acm->disconnected)
+		return 0;
+	/*
+	 * This is inaccurate (overcounts), but it works.
+	 */
+	return (ACM_NW - acm_wb_is_avail(acm)) * acm->writesize;
+}
+
+static void acm_tty_throttle(struct tty_struct *tty)
+{
+	struct acm *acm = tty->driver_data;
+
+	set_bit(ACM_THROTTLED, &acm->flags);
+}
+
+static void acm_tty_unthrottle(struct tty_struct *tty)
+{
+	struct acm *acm = tty->driver_data;
+
+	clear_bit(ACM_THROTTLED, &acm->flags);
+
+	/* Matches the smp_mb__after_atomic() in acm_read_bulk_callback(). */
+	smp_mb();
+
+	acm_submit_read_urbs(acm, GFP_KERNEL);
+}
+
+static int acm_tty_break_ctl(struct tty_struct *tty, int state)
+{
+	struct acm *acm = tty->driver_data;
+	int retval;
+
+	if (!(acm->ctrl_caps & USB_CDC_CAP_BRK))
+		return -EOPNOTSUPP;
+
+	retval = acm_send_break(acm, state ? 0xffff : 0);
+	if (retval < 0)
+		dev_dbg(&acm->control->dev,
+			"%s - send break failed\n", __func__);
+	return retval;
+}
+
+static int acm_tty_tiocmget(struct tty_struct *tty)
+{
+	struct acm *acm = tty->driver_data;
+
+	return (acm->ctrlout & USB_CDC_CTRL_DTR ? TIOCM_DTR : 0) |
+	       (acm->ctrlout & USB_CDC_CTRL_RTS ? TIOCM_RTS : 0) |
+	       (acm->ctrlin  & USB_CDC_SERIAL_STATE_DSR ? TIOCM_DSR : 0) |
+	       (acm->ctrlin  & USB_CDC_SERIAL_STATE_RING_SIGNAL ? TIOCM_RI : 0) |
+	       (acm->ctrlin  & USB_CDC_SERIAL_STATE_DCD ? TIOCM_CD : 0) |
+	       TIOCM_CTS;
+}
+
+static int acm_tty_tiocmset(struct tty_struct *tty,
+			    unsigned int set, unsigned int clear)
+{
+	struct acm *acm = tty->driver_data;
+	unsigned int newctrl;
+
+	newctrl = acm->ctrlout;
+	set = (set & TIOCM_DTR ? USB_CDC_CTRL_DTR : 0) |
+	      (set & TIOCM_RTS ? USB_CDC_CTRL_RTS : 0);
+	clear = (clear & TIOCM_DTR ? USB_CDC_CTRL_DTR : 0) |
+		(clear & TIOCM_RTS ? USB_CDC_CTRL_RTS : 0);
+
+	newctrl = (newctrl & ~clear) | set;
+
+	if (acm->ctrlout == newctrl)
+		return 0;
+	return acm_set_control(acm, acm->ctrlout = newctrl);
+}
+
+static int get_serial_info(struct tty_struct *tty, struct serial_struct *ss)
+{
+	struct acm *acm = tty->driver_data;
+
+	ss->line = acm->minor;
+	ss->close_delay	= jiffies_to_msecs(acm->port.close_delay) / 10;
+	ss->closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+				ASYNC_CLOSING_WAIT_NONE :
+				jiffies_to_msecs(acm->port.closing_wait) / 10;
+	return 0;
+}
+
+static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss)
+{
+	struct acm *acm = tty->driver_data;
+	unsigned int closing_wait, close_delay;
+	int retval = 0;
+
+	close_delay = msecs_to_jiffies(ss->close_delay * 10);
+	closing_wait = ss->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+			ASYNC_CLOSING_WAIT_NONE :
+			msecs_to_jiffies(ss->closing_wait * 10);
+
+	mutex_lock(&acm->port.mutex);
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		if ((close_delay != acm->port.close_delay) ||
+		    (closing_wait != acm->port.closing_wait))
+			retval = -EPERM;
+	} else {
+		acm->port.close_delay  = close_delay;
+		acm->port.closing_wait = closing_wait;
+	}
+
+	mutex_unlock(&acm->port.mutex);
+	return retval;
+}
+
+static int wait_serial_change(struct acm *acm, unsigned long arg)
+{
+	int rv = 0;
+	DECLARE_WAITQUEUE(wait, current);
+	struct async_icount old, new;
+
+	do {
+		spin_lock_irq(&acm->read_lock);
+		old = acm->oldcount;
+		new = acm->iocount;
+		acm->oldcount = new;
+		spin_unlock_irq(&acm->read_lock);
+
+		if ((arg & TIOCM_DSR) &&
+			old.dsr != new.dsr)
+			break;
+		if ((arg & TIOCM_CD)  &&
+			old.dcd != new.dcd)
+			break;
+		if ((arg & TIOCM_RI) &&
+			old.rng != new.rng)
+			break;
+
+		add_wait_queue(&acm->wioctl, &wait);
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule();
+		remove_wait_queue(&acm->wioctl, &wait);
+		if (acm->disconnected) {
+			if (arg & TIOCM_CD)
+				break;
+			else
+				rv = -ENODEV;
+		} else {
+			if (signal_pending(current))
+				rv = -ERESTARTSYS;
+		}
+	} while (!rv);
+
+	
+
+	return rv;
+}
+
+static int acm_tty_get_icount(struct tty_struct *tty,
+					struct serial_icounter_struct *icount)
+{
+	struct acm *acm = tty->driver_data;
+
+	icount->dsr = acm->iocount.dsr;
+	icount->rng = acm->iocount.rng;
+	icount->dcd = acm->iocount.dcd;
+	icount->frame = acm->iocount.frame;
+	icount->overrun = acm->iocount.overrun;
+	icount->parity = acm->iocount.parity;
+	icount->brk = acm->iocount.brk;
+
+	return 0;
+}
+
+static int acm_tty_ioctl(struct tty_struct *tty,
+					unsigned int cmd, unsigned long arg)
+{
+	struct acm *acm = tty->driver_data;
+	int rv = -ENOIOCTLCMD;
+
+	switch (cmd) {
+	case TIOCMIWAIT:
+		rv = usb_autopm_get_interface(acm->control);
+		if (rv < 0) {
+			rv = -EIO;
+			break;
+		}
+		rv = wait_serial_change(acm, arg);
+		usb_autopm_put_interface(acm->control);
+		break;
+	}
+
+	return rv;
+}
+
+static void acm_tty_set_termios(struct tty_struct *tty,
+				const struct ktermios *termios_old)
+{
+	struct acm *acm = tty->driver_data;
+	struct ktermios *termios = &tty->termios;
+	struct usb_cdc_line_coding newline;
+	int newctrl = acm->ctrlout;
+
+	newline.dwDTERate = cpu_to_le32(tty_get_baud_rate(tty));
+	newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0;
+	newline.bParityType = termios->c_cflag & PARENB ?
+				(termios->c_cflag & PARODD ? 1 : 2) +
+				(termios->c_cflag & CMSPAR ? 2 : 0) : 0;
+	newline.bDataBits = tty_get_char_size(termios->c_cflag);
+
+	/* FIXME: Needs to clear unsupported bits in the termios */
+	acm->clocal = ((termios->c_cflag & CLOCAL) != 0);
+
+	if (C_BAUD(tty) == B0) {
+		newline.dwDTERate = acm->line.dwDTERate;
+		newctrl &= ~USB_CDC_CTRL_DTR;
+	} else if (termios_old && (termios_old->c_cflag & CBAUD) == B0) {
+		newctrl |=  USB_CDC_CTRL_DTR;
+	}
+
+	if (newctrl != acm->ctrlout)
+		acm_set_control(acm, acm->ctrlout = newctrl);
+
+	if (memcmp(&acm->line, &newline, sizeof newline)) {
+		memcpy(&acm->line, &newline, sizeof newline);
+		dev_dbg(&acm->control->dev, "%s - set line: %d %d %d %d\n",
+			__func__,
+			le32_to_cpu(newline.dwDTERate),
+			newline.bCharFormat, newline.bParityType,
+			newline.bDataBits);
+		acm_set_line(acm, &acm->line);
+	}
+}
+
+static const struct tty_port_operations acm_port_ops = {
+	.dtr_rts = acm_port_dtr_rts,
+	.shutdown = acm_port_shutdown,
+	.activate = acm_port_activate,
+	.destruct = acm_port_destruct,
+};
+
+/*
+ * USB probe and disconnect routines.
+ */
+
+/* Little helpers: write/read buffers free */
+static void acm_write_buffers_free(struct acm *acm)
+{
+	int i;
+	struct acm_wb *wb;
+
+	for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++)
+		usb_free_coherent(acm->dev, acm->writesize, wb->buf, wb->dmah);
+}
+
+static void acm_read_buffers_free(struct acm *acm)
+{
+	int i;
+
+	for (i = 0; i < acm->rx_buflimit; i++)
+		usb_free_coherent(acm->dev, acm->readsize,
+			  acm->read_buffers[i].base, acm->read_buffers[i].dma);
+}
+
+/* Little helper: write buffers allocate */
+static int acm_write_buffers_alloc(struct acm *acm)
+{
+	int i;
+	struct acm_wb *wb;
+
+	for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) {
+		wb->buf = usb_alloc_coherent(acm->dev, acm->writesize, GFP_KERNEL,
+		    &wb->dmah);
+		if (!wb->buf) {
+			while (i != 0) {
+				--i;
+				--wb;
+				usb_free_coherent(acm->dev, acm->writesize,
+				    wb->buf, wb->dmah);
+			}
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+static int acm_probe(struct usb_interface *intf,
+		     const struct usb_device_id *id)
+{
+	struct usb_cdc_union_desc *union_header = NULL;
+	struct usb_cdc_call_mgmt_descriptor *cmgmd = NULL;
+	unsigned char *buffer = intf->altsetting->extra;
+	int buflen = intf->altsetting->extralen;
+	struct usb_interface *control_interface;
+	struct usb_interface *data_interface;
+	struct usb_endpoint_descriptor *epctrl = NULL;
+	struct usb_endpoint_descriptor *epread = NULL;
+	struct usb_endpoint_descriptor *epwrite = NULL;
+	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	struct usb_cdc_parsed_header h;
+	struct acm *acm;
+	int minor;
+	int ctrlsize, readsize;
+	u8 *buf;
+	int call_intf_num = -1;
+	int data_intf_num = -1;
+	unsigned long quirks;
+	int num_rx_buf;
+	int i;
+	int combined_interfaces = 0;
+	struct device *tty_dev;
+	int rv = -ENOMEM;
+	int res;
+
+	/* normal quirks */
+	quirks = (unsigned long)id->driver_info;
+
+	if (quirks == IGNORE_DEVICE)
+		return -ENODEV;
+
+	memset(&h, 0x00, sizeof(struct usb_cdc_parsed_header));
+
+	num_rx_buf = (quirks == SINGLE_RX_URB) ? 1 : ACM_NR;
+
+	/* handle quirks deadly to normal probing*/
+	if (quirks == NO_UNION_NORMAL) {
+		data_interface = usb_ifnum_to_if(usb_dev, 1);
+		control_interface = usb_ifnum_to_if(usb_dev, 0);
+		/* we would crash */
+		if (!data_interface || !control_interface)
+			return -ENODEV;
+		goto skip_normal_probe;
+	}
+
+	/* normal probing*/
+	if (!buffer) {
+		dev_err(&intf->dev, "Weird descriptor references\n");
+		return -EINVAL;
+	}
+
+	if (!buflen) {
+		if (intf->cur_altsetting->endpoint &&
+				intf->cur_altsetting->endpoint->extralen &&
+				intf->cur_altsetting->endpoint->extra) {
+			dev_dbg(&intf->dev,
+				"Seeking extra descriptors on endpoint\n");
+			buflen = intf->cur_altsetting->endpoint->extralen;
+			buffer = intf->cur_altsetting->endpoint->extra;
+		} else {
+			dev_err(&intf->dev,
+				"Zero length descriptor references\n");
+			return -EINVAL;
+		}
+	}
+
+	cdc_parse_cdc_header(&h, intf, buffer, buflen);
+	union_header = h.usb_cdc_union_desc;
+	cmgmd = h.usb_cdc_call_mgmt_descriptor;
+	if (cmgmd)
+		call_intf_num = cmgmd->bDataInterface;
+
+	if (!union_header) {
+		if (intf->cur_altsetting->desc.bNumEndpoints == 3) {
+			dev_dbg(&intf->dev, "No union descriptor, assuming single interface\n");
+			combined_interfaces = 1;
+			control_interface = data_interface = intf;
+			goto look_for_collapsed_interface;
+		} else if (call_intf_num > 0) {
+			dev_dbg(&intf->dev, "No union descriptor, using call management descriptor\n");
+			data_intf_num = call_intf_num;
+			data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
+			control_interface = intf;
+		} else {
+			dev_dbg(&intf->dev, "No union descriptor, giving up\n");
+			return -ENODEV;
+		}
+	} else {
+		int class = -1;
+
+		data_intf_num = union_header->bSlaveInterface0;
+		control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
+		data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
+
+		if (control_interface)
+			class = control_interface->cur_altsetting->desc.bInterfaceClass;
+
+		if (class != USB_CLASS_COMM && class != USB_CLASS_CDC_DATA) {
+			dev_dbg(&intf->dev, "Broken union descriptor, assuming single interface\n");
+			combined_interfaces = 1;
+			control_interface = data_interface = intf;
+			goto look_for_collapsed_interface;
+		}
+	}
+
+	if (!control_interface || !data_interface) {
+		dev_dbg(&intf->dev, "no interfaces\n");
+		return -ENODEV;
+	}
+
+	if (data_intf_num != call_intf_num)
+		dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n");
+
+	if (control_interface == data_interface) {
+		/* some broken devices designed for windows work this way */
+		dev_warn(&intf->dev,"Control and data interfaces are not separated!\n");
+		combined_interfaces = 1;
+		/* a popular other OS doesn't use it */
+		quirks |= NO_CAP_LINE;
+		if (data_interface->cur_altsetting->desc.bNumEndpoints != 3) {
+			dev_err(&intf->dev, "This needs exactly 3 endpoints\n");
+			return -EINVAL;
+		}
+look_for_collapsed_interface:
+		res = usb_find_common_endpoints(data_interface->cur_altsetting,
+				&epread, &epwrite, &epctrl, NULL);
+		if (res)
+			return res;
+
+		goto made_compressed_probe;
+	}
+
+skip_normal_probe:
+
+	/*workaround for switched interfaces */
+	if (data_interface->cur_altsetting->desc.bInterfaceClass != USB_CLASS_CDC_DATA) {
+		if (control_interface->cur_altsetting->desc.bInterfaceClass == USB_CLASS_CDC_DATA) {
+			dev_dbg(&intf->dev,
+				"Your device has switched interfaces.\n");
+			swap(control_interface, data_interface);
+		} else {
+			return -EINVAL;
+		}
+	}
+
+	/* Accept probe requests only for the control interface */
+	if (!combined_interfaces && intf != control_interface)
+		return -ENODEV;
+
+	if (data_interface->cur_altsetting->desc.bNumEndpoints < 2 ||
+	    control_interface->cur_altsetting->desc.bNumEndpoints == 0)
+		return -EINVAL;
+
+	epctrl = &control_interface->cur_altsetting->endpoint[0].desc;
+	epread = &data_interface->cur_altsetting->endpoint[0].desc;
+	epwrite = &data_interface->cur_altsetting->endpoint[1].desc;
+
+
+	/* workaround for switched endpoints */
+	if (!usb_endpoint_dir_in(epread)) {
+		/* descriptors are swapped */
+		dev_dbg(&intf->dev,
+			"The data interface has switched endpoints\n");
+		swap(epread, epwrite);
+	}
+made_compressed_probe:
+	dev_dbg(&intf->dev, "interfaces are valid\n");
+
+	acm = kzalloc(sizeof(struct acm), GFP_KERNEL);
+	if (!acm)
+		return -ENOMEM;
+
+	tty_port_init(&acm->port);
+	acm->port.ops = &acm_port_ops;
+
+	ctrlsize = usb_endpoint_maxp(epctrl);
+	readsize = usb_endpoint_maxp(epread) *
+				(quirks == SINGLE_RX_URB ? 1 : 2);
+	acm->combined_interfaces = combined_interfaces;
+	acm->writesize = usb_endpoint_maxp(epwrite) * 20;
+	acm->control = control_interface;
+	acm->data = data_interface;
+
+	usb_get_intf(acm->control); /* undone in destruct() */
+
+	minor = acm_alloc_minor(acm);
+	if (minor < 0) {
+		acm->minor = ACM_MINOR_INVALID;
+		goto err_put_port;
+	}
+
+	acm->minor = minor;
+	acm->dev = usb_dev;
+	if (h.usb_cdc_acm_descriptor)
+		acm->ctrl_caps = h.usb_cdc_acm_descriptor->bmCapabilities;
+	if (quirks & NO_CAP_LINE)
+		acm->ctrl_caps &= ~USB_CDC_CAP_LINE;
+	acm->ctrlsize = ctrlsize;
+	acm->readsize = readsize;
+	acm->rx_buflimit = num_rx_buf;
+	INIT_DELAYED_WORK(&acm->dwork, acm_softint);
+	init_waitqueue_head(&acm->wioctl);
+	spin_lock_init(&acm->write_lock);
+	spin_lock_init(&acm->read_lock);
+	mutex_init(&acm->mutex);
+	if (usb_endpoint_xfer_int(epread)) {
+		acm->bInterval = epread->bInterval;
+		acm->in = usb_rcvintpipe(usb_dev, epread->bEndpointAddress);
+	} else {
+		acm->in = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
+	}
+	if (usb_endpoint_xfer_int(epwrite))
+		acm->out = usb_sndintpipe(usb_dev, epwrite->bEndpointAddress);
+	else
+		acm->out = usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress);
+	init_usb_anchor(&acm->delayed);
+	acm->quirks = quirks;
+
+	buf = usb_alloc_coherent(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
+	if (!buf)
+		goto err_put_port;
+	acm->ctrl_buffer = buf;
+
+	if (acm_write_buffers_alloc(acm) < 0)
+		goto err_free_ctrl_buffer;
+
+	acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!acm->ctrlurb)
+		goto err_free_write_buffers;
+
+	for (i = 0; i < num_rx_buf; i++) {
+		struct acm_rb *rb = &(acm->read_buffers[i]);
+		struct urb *urb;
+
+		rb->base = usb_alloc_coherent(acm->dev, readsize, GFP_KERNEL,
+								&rb->dma);
+		if (!rb->base)
+			goto err_free_read_urbs;
+		rb->index = i;
+		rb->instance = acm;
+
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb)
+			goto err_free_read_urbs;
+
+		urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+		urb->transfer_dma = rb->dma;
+		if (usb_endpoint_xfer_int(epread))
+			usb_fill_int_urb(urb, acm->dev, acm->in, rb->base,
+					 acm->readsize,
+					 acm_read_bulk_callback, rb,
+					 acm->bInterval);
+		else
+			usb_fill_bulk_urb(urb, acm->dev, acm->in, rb->base,
+					  acm->readsize,
+					  acm_read_bulk_callback, rb);
+
+		acm->read_urbs[i] = urb;
+		__set_bit(i, &acm->read_urbs_free);
+	}
+	for (i = 0; i < ACM_NW; i++) {
+		struct acm_wb *snd = &(acm->wb[i]);
+
+		snd->urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!snd->urb)
+			goto err_free_write_urbs;
+
+		if (usb_endpoint_xfer_int(epwrite))
+			usb_fill_int_urb(snd->urb, usb_dev, acm->out,
+				NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval);
+		else
+			usb_fill_bulk_urb(snd->urb, usb_dev, acm->out,
+				NULL, acm->writesize, acm_write_bulk, snd);
+		snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+		if (quirks & SEND_ZERO_PACKET)
+			snd->urb->transfer_flags |= URB_ZERO_PACKET;
+		snd->instance = acm;
+	}
+
+	usb_set_intfdata(intf, acm);
+
+	i = device_create_file(&intf->dev, &dev_attr_bmCapabilities);
+	if (i < 0)
+		goto err_free_write_urbs;
+
+	if (h.usb_cdc_country_functional_desc) { /* export the country data */
+		struct usb_cdc_country_functional_desc * cfd =
+					h.usb_cdc_country_functional_desc;
+
+		acm->country_codes = kmalloc(cfd->bLength - 4, GFP_KERNEL);
+		if (!acm->country_codes)
+			goto skip_countries;
+		acm->country_code_size = cfd->bLength - 4;
+		memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0,
+							cfd->bLength - 4);
+		acm->country_rel_date = cfd->iCountryCodeRelDate;
+
+		i = device_create_file(&intf->dev, &dev_attr_wCountryCodes);
+		if (i < 0) {
+			kfree(acm->country_codes);
+			acm->country_codes = NULL;
+			acm->country_code_size = 0;
+			goto skip_countries;
+		}
+
+		i = device_create_file(&intf->dev,
+						&dev_attr_iCountryCodeRelDate);
+		if (i < 0) {
+			device_remove_file(&intf->dev, &dev_attr_wCountryCodes);
+			kfree(acm->country_codes);
+			acm->country_codes = NULL;
+			acm->country_code_size = 0;
+			goto skip_countries;
+		}
+	}
+
+skip_countries:
+	usb_fill_int_urb(acm->ctrlurb, usb_dev,
+			 usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
+			 acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm,
+			 /* works around buggy devices */
+			 epctrl->bInterval ? epctrl->bInterval : 16);
+	acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	acm->ctrlurb->transfer_dma = acm->ctrl_dma;
+	acm->notification_buffer = NULL;
+	acm->nb_index = 0;
+	acm->nb_size = 0;
+
+	acm->line.dwDTERate = cpu_to_le32(9600);
+	acm->line.bDataBits = 8;
+	acm_set_line(acm, &acm->line);
+
+	if (!acm->combined_interfaces) {
+		rv = usb_driver_claim_interface(&acm_driver, data_interface, acm);
+		if (rv)
+			goto err_remove_files;
+	}
+
+	tty_dev = tty_port_register_device(&acm->port, acm_tty_driver, minor,
+			&control_interface->dev);
+	if (IS_ERR(tty_dev)) {
+		rv = PTR_ERR(tty_dev);
+		goto err_release_data_interface;
+	}
+
+	if (quirks & CLEAR_HALT_CONDITIONS) {
+		usb_clear_halt(usb_dev, acm->in);
+		usb_clear_halt(usb_dev, acm->out);
+	}
+
+	dev_info(&intf->dev, "ttyACM%d: USB ACM device\n", minor);
+
+	return 0;
+
+err_release_data_interface:
+	if (!acm->combined_interfaces) {
+		/* Clear driver data so that disconnect() returns early. */
+		usb_set_intfdata(data_interface, NULL);
+		usb_driver_release_interface(&acm_driver, data_interface);
+	}
+err_remove_files:
+	if (acm->country_codes) {
+		device_remove_file(&acm->control->dev,
+				&dev_attr_wCountryCodes);
+		device_remove_file(&acm->control->dev,
+				&dev_attr_iCountryCodeRelDate);
+	}
+	device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities);
+err_free_write_urbs:
+	for (i = 0; i < ACM_NW; i++)
+		usb_free_urb(acm->wb[i].urb);
+err_free_read_urbs:
+	for (i = 0; i < num_rx_buf; i++)
+		usb_free_urb(acm->read_urbs[i]);
+	acm_read_buffers_free(acm);
+	usb_free_urb(acm->ctrlurb);
+err_free_write_buffers:
+	acm_write_buffers_free(acm);
+err_free_ctrl_buffer:
+	usb_free_coherent(usb_dev, ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
+err_put_port:
+	tty_port_put(&acm->port);
+
+	return rv;
+}
+
+static void acm_disconnect(struct usb_interface *intf)
+{
+	struct acm *acm = usb_get_intfdata(intf);
+	struct tty_struct *tty;
+	int i;
+
+	/* sibling interface is already cleaning up */
+	if (!acm)
+		return;
+
+	acm->disconnected = true;
+	/*
+	 * there is a circular dependency. acm_softint() can resubmit
+	 * the URBs in error handling so we need to block any
+	 * submission right away
+	 */
+	acm_poison_urbs(acm);
+	mutex_lock(&acm->mutex);
+	if (acm->country_codes) {
+		device_remove_file(&acm->control->dev,
+				&dev_attr_wCountryCodes);
+		device_remove_file(&acm->control->dev,
+				&dev_attr_iCountryCodeRelDate);
+	}
+	wake_up_all(&acm->wioctl);
+	device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities);
+	usb_set_intfdata(acm->control, NULL);
+	usb_set_intfdata(acm->data, NULL);
+	mutex_unlock(&acm->mutex);
+
+	tty = tty_port_tty_get(&acm->port);
+	if (tty) {
+		tty_vhangup(tty);
+		tty_kref_put(tty);
+	}
+
+	cancel_delayed_work_sync(&acm->dwork);
+
+	tty_unregister_device(acm_tty_driver, acm->minor);
+
+	usb_free_urb(acm->ctrlurb);
+	for (i = 0; i < ACM_NW; i++)
+		usb_free_urb(acm->wb[i].urb);
+	for (i = 0; i < acm->rx_buflimit; i++)
+		usb_free_urb(acm->read_urbs[i]);
+	acm_write_buffers_free(acm);
+	usb_free_coherent(acm->dev, acm->ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
+	acm_read_buffers_free(acm);
+
+	kfree(acm->notification_buffer);
+
+	if (!acm->combined_interfaces)
+		usb_driver_release_interface(&acm_driver, intf == acm->control ?
+					acm->data : acm->control);
+
+	tty_port_put(&acm->port);
+}
+
+#ifdef CONFIG_PM
+static int acm_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct acm *acm = usb_get_intfdata(intf);
+	int cnt;
+
+	spin_lock_irq(&acm->write_lock);
+	if (PMSG_IS_AUTO(message)) {
+		if (acm->transmitting) {
+			spin_unlock_irq(&acm->write_lock);
+			return -EBUSY;
+		}
+	}
+	cnt = acm->susp_count++;
+	spin_unlock_irq(&acm->write_lock);
+
+	if (cnt)
+		return 0;
+
+	acm_poison_urbs(acm);
+	cancel_delayed_work_sync(&acm->dwork);
+	acm->urbs_in_error_delay = 0;
+
+	return 0;
+}
+
+static int acm_resume(struct usb_interface *intf)
+{
+	struct acm *acm = usb_get_intfdata(intf);
+	struct urb *urb;
+	int rv = 0;
+
+	spin_lock_irq(&acm->write_lock);
+
+	if (--acm->susp_count)
+		goto out;
+
+	acm_unpoison_urbs(acm);
+
+	if (tty_port_initialized(&acm->port)) {
+		rv = usb_submit_urb(acm->ctrlurb, GFP_ATOMIC);
+
+		for (;;) {
+			urb = usb_get_from_anchor(&acm->delayed);
+			if (!urb)
+				break;
+
+			acm_start_wb(acm, urb->context);
+		}
+
+		/*
+		 * delayed error checking because we must
+		 * do the write path at all cost
+		 */
+		if (rv < 0)
+			goto out;
+
+		rv = acm_submit_read_urbs(acm, GFP_ATOMIC);
+	}
+out:
+	spin_unlock_irq(&acm->write_lock);
+
+	return rv;
+}
+
+static int acm_reset_resume(struct usb_interface *intf)
+{
+	struct acm *acm = usb_get_intfdata(intf);
+
+	if (tty_port_initialized(&acm->port))
+		tty_port_tty_hangup(&acm->port, false);
+
+	return acm_resume(intf);
+}
+
+#endif /* CONFIG_PM */
+
+static int acm_pre_reset(struct usb_interface *intf)
+{
+	struct acm *acm = usb_get_intfdata(intf);
+
+	clear_bit(EVENT_RX_STALL, &acm->flags);
+	acm->nb_index = 0; /* pending control transfers are lost */
+
+	return 0;
+}
+
+#define NOKIA_PCSUITE_ACM_INFO(x) \
+		USB_DEVICE_AND_INTERFACE_INFO(0x0421, x, \
+		USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, \
+		USB_CDC_ACM_PROTO_VENDOR)
+
+#define SAMSUNG_PCSUITE_ACM_INFO(x) \
+		USB_DEVICE_AND_INTERFACE_INFO(0x04e7, x, \
+		USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, \
+		USB_CDC_ACM_PROTO_VENDOR)
+
+/*
+ * USB driver structure.
+ */
+
+static const struct usb_device_id acm_ids[] = {
+	/* quirky and broken devices */
+	{ USB_DEVICE(0x0424, 0x274e), /* Microchip Technology, Inc. (formerly SMSC) */
+	  .driver_info = DISABLE_ECHO, }, /* DISABLE ECHO in termios flag */
+	{ USB_DEVICE(0x076d, 0x0006), /* Denso Cradle CU-321 */
+	.driver_info = NO_UNION_NORMAL, },/* has no union descriptor */
+	{ USB_DEVICE(0x17ef, 0x7000), /* Lenovo USB modem */
+	.driver_info = NO_UNION_NORMAL, },/* has no union descriptor */
+	{ USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+	{ USB_DEVICE(0x045b, 0x023c),	/* Renesas USB Download mode */
+	.driver_info = DISABLE_ECHO,	/* Don't echo banner */
+	},
+	{ USB_DEVICE(0x045b, 0x0248),	/* Renesas USB Download mode */
+	.driver_info = DISABLE_ECHO,	/* Don't echo banner */
+	},
+	{ USB_DEVICE(0x045b, 0x024D),	/* Renesas USB Download mode */
+	.driver_info = DISABLE_ECHO,	/* Don't echo banner */
+	},
+	{ USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+	{ USB_DEVICE(0x0e8d, 0x2000), /* MediaTek Inc Preloader */
+	.driver_info = DISABLE_ECHO, /* DISABLE ECHO in termios flag */
+	},
+	{ USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+	{ USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+	{ USB_DEVICE(0x079b, 0x000f), /* BT On-Air USB MODEM */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+	{ USB_DEVICE(0x0ace, 0x1602), /* ZyDAS 56K USB MODEM */
+	.driver_info = SINGLE_RX_URB,
+	},
+	{ USB_DEVICE(0x0ace, 0x1608), /* ZyDAS 56K USB MODEM */
+	.driver_info = SINGLE_RX_URB, /* firmware bug */
+	},
+	{ USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */
+	.driver_info = SINGLE_RX_URB, /* firmware bug */
+	},
+	{ USB_DEVICE(0x11ca, 0x0201), /* VeriFone Mx870 Gadget Serial */
+	.driver_info = SINGLE_RX_URB,
+	},
+	{ USB_DEVICE(0x1965, 0x0018), /* Uniden UBC125XLT */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+	{ USB_DEVICE(0x22b8, 0x7000), /* Motorola Q Phone */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+	{ USB_DEVICE(0x0803, 0x3095), /* Zoom Telephonics Model 3095F USB MODEM */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+	{ USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+	{ USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+	{ USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+	{ USB_DEVICE(0x0572, 0x1349), /* Hiro (Conexant) USB MODEM H50228 */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+	{ USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */
+	.driver_info = QUIRK_CONTROL_LINE_STATE, },
+	{ USB_DEVICE(0x2184, 0x001c) },	/* GW Instek AFG-2225 */
+	{ USB_DEVICE(0x2184, 0x0036) },	/* GW Instek AFG-125 */
+	{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
+	},
+	/* Motorola H24 HSPA module: */
+	{ USB_DEVICE(0x22b8, 0x2d91) }, /* modem                                */
+	{ USB_DEVICE(0x22b8, 0x2d92),   /* modem           + diagnostics        */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d93),   /* modem + AT port                      */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d95),   /* modem + AT port + diagnostics        */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d96),   /* modem                         + NMEA */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d97),   /* modem           + diagnostics + NMEA */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d99),   /* modem + AT port               + NMEA */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d9a),   /* modem + AT port + diagnostics + NMEA */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+
+	{ USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
+	.driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on
+					   data interface instead of
+					   communications interface.
+					   Maybe we should define a new
+					   quirk for this. */
+	},
+	{ USB_DEVICE(0x0572, 0x1340), /* Conexant CX93010-2x UCMxx */
+	.driver_info = NO_UNION_NORMAL,
+	},
+	{ USB_DEVICE(0x05f9, 0x4002), /* PSC Scanning, Magellan 800i */
+	.driver_info = NO_UNION_NORMAL,
+	},
+	{ USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
+	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+	},
+	{ USB_DEVICE(0x1576, 0x03b1), /* Maretron USB100 */
+	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+	},
+	{ USB_DEVICE(0xfff0, 0x0100), /* DATECS FP-2000 */
+	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+	},
+	{ USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */
+	.driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */
+	},
+	{ USB_DEVICE(0x0c26, 0x0020), /* Icom ICF3400 Serie */
+	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+	},
+	{ USB_DEVICE(0x0ca6, 0xa050), /* Castles VEGA3000 */
+	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+	},
+
+	{ USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */
+	.driver_info = CLEAR_HALT_CONDITIONS,
+	},
+
+	/* Nokia S60 phones expose two ACM channels. The first is
+	 * a modem and is picked up by the standard AT-command
+	 * information below. The second is 'vendor-specific' but
+	 * is treated as a serial device at the S60 end, so we want
+	 * to expose it on Linux too. */
+	{ NOKIA_PCSUITE_ACM_INFO(0x042D), }, /* Nokia 3250 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x04D8), }, /* Nokia 5500 Sport */
+	{ NOKIA_PCSUITE_ACM_INFO(0x04C9), }, /* Nokia E50 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0419), }, /* Nokia E60 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x044D), }, /* Nokia E61 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0001), }, /* Nokia E61i */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0475), }, /* Nokia E62 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0508), }, /* Nokia E65 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0418), }, /* Nokia E70 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0425), }, /* Nokia N71 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0486), }, /* Nokia N73 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x04DF), }, /* Nokia N75 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x000e), }, /* Nokia N77 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0445), }, /* Nokia N80 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x042F), }, /* Nokia N91 & N91 8GB */
+	{ NOKIA_PCSUITE_ACM_INFO(0x048E), }, /* Nokia N92 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0420), }, /* Nokia N93 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x04E6), }, /* Nokia N93i  */
+	{ NOKIA_PCSUITE_ACM_INFO(0x04B2), }, /* Nokia 5700 XpressMusic */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0134), }, /* Nokia 6110 Navigator (China) */
+	{ NOKIA_PCSUITE_ACM_INFO(0x046E), }, /* Nokia 6110 Navigator */
+	{ NOKIA_PCSUITE_ACM_INFO(0x002f), }, /* Nokia 6120 classic &  */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0088), }, /* Nokia 6121 classic */
+	{ NOKIA_PCSUITE_ACM_INFO(0x00fc), }, /* Nokia 6124 classic */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0042), }, /* Nokia E51 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x00b0), }, /* Nokia E66 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x00ab), }, /* Nokia E71 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0481), }, /* Nokia N76 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0007), }, /* Nokia N81 & N81 8GB */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0071), }, /* Nokia N82 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x04F0), }, /* Nokia N95 & N95-3 NAM */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0070), }, /* Nokia N95 8GB  */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0099), }, /* Nokia 6210 Navigator, RM-367 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0128), }, /* Nokia 6210 Navigator, RM-419 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x008f), }, /* Nokia 6220 Classic */
+	{ NOKIA_PCSUITE_ACM_INFO(0x00a0), }, /* Nokia 6650 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x007b), }, /* Nokia N78 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0094), }, /* Nokia N85 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x003a), }, /* Nokia N96 & N96-3  */
+	{ NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */
+	{ NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x02e3), }, /* Nokia 5230, RM-588 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0178), }, /* Nokia E63 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x010e), }, /* Nokia E75 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x02d9), }, /* Nokia 6760 Slide */
+	{ NOKIA_PCSUITE_ACM_INFO(0x01d0), }, /* Nokia E52 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0223), }, /* Nokia E72 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0275), }, /* Nokia X6 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x026c), }, /* Nokia N97 Mini */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0154), }, /* Nokia 5800 XpressMusic */
+	{ NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0335), }, /* Nokia E7 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x03cd), }, /* Nokia C7 */
+	{ SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
+
+	/* Support for Owen devices */
+	{ USB_DEVICE(0x03eb, 0x0030), }, /* Owen SI30 */
+
+	/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
+
+#if IS_ENABLED(CONFIG_INPUT_IMS_PCU)
+	{ USB_DEVICE(0x04d8, 0x0082),	/* Application mode */
+	.driver_info = IGNORE_DEVICE,
+	},
+	{ USB_DEVICE(0x04d8, 0x0083),	/* Bootloader mode */
+	.driver_info = IGNORE_DEVICE,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_IR_TOY)
+	{ USB_DEVICE(0x04d8, 0xfd08),
+	.driver_info = IGNORE_DEVICE,
+	},
+
+	{ USB_DEVICE(0x04d8, 0xf58b),
+	.driver_info = IGNORE_DEVICE,
+	},
+#endif
+
+#if IS_ENABLED(CONFIG_USB_SERIAL_XR)
+	{ USB_DEVICE(0x04e2, 0x1400), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1401), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1402), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1403), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1410), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1411), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1412), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1414), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1420), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1422), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1424), .driver_info = IGNORE_DEVICE },
+#endif
+
+	/*Samsung phone in firmware update mode */
+	{ USB_DEVICE(0x04e8, 0x685d),
+	.driver_info = IGNORE_DEVICE,
+	},
+
+	/* Exclude Infineon Flash Loader utility */
+	{ USB_DEVICE(0x058b, 0x0041),
+	.driver_info = IGNORE_DEVICE,
+	},
+
+	/* Exclude ETAS ES58x */
+	{ USB_DEVICE(0x108c, 0x0159), /* ES581.4 */
+	.driver_info = IGNORE_DEVICE,
+	},
+	{ USB_DEVICE(0x108c, 0x0168), /* ES582.1 */
+	.driver_info = IGNORE_DEVICE,
+	},
+	{ USB_DEVICE(0x108c, 0x0169), /* ES584.1 */
+	.driver_info = IGNORE_DEVICE,
+	},
+
+	{ USB_DEVICE(0x1bc7, 0x0021), /* Telit 3G ACM only composition */
+	.driver_info = SEND_ZERO_PACKET,
+	},
+	{ USB_DEVICE(0x1bc7, 0x0023), /* Telit 3G ACM + ECM composition */
+	.driver_info = SEND_ZERO_PACKET,
+	},
+
+	/* Exclude Goodix Fingerprint Reader */
+	{ USB_DEVICE(0x27c6, 0x5395),
+	.driver_info = IGNORE_DEVICE,
+	},
+
+	/* Exclude Heimann Sensor GmbH USB appset demo */
+	{ USB_DEVICE(0x32a7, 0x0000),
+	.driver_info = IGNORE_DEVICE,
+	},
+
+	/* control interfaces without any protocol set */
+	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+		USB_CDC_PROTO_NONE) },
+
+	/* control interfaces with various AT-command sets */
+	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+		USB_CDC_ACM_PROTO_AT_V25TER) },
+	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+		USB_CDC_ACM_PROTO_AT_PCCA101) },
+	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+		USB_CDC_ACM_PROTO_AT_PCCA101_WAKE) },
+	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+		USB_CDC_ACM_PROTO_AT_GSM) },
+	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+		USB_CDC_ACM_PROTO_AT_3G) },
+	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+		USB_CDC_ACM_PROTO_AT_CDMA) },
+
+	{ USB_DEVICE(0x1519, 0x0452), /* Intel 7260 modem */
+	.driver_info = SEND_ZERO_PACKET,
+	},
+
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, acm_ids);
+
+static struct usb_driver acm_driver = {
+	.name =		"cdc_acm",
+	.probe =	acm_probe,
+	.disconnect =	acm_disconnect,
+#ifdef CONFIG_PM
+	.suspend =	acm_suspend,
+	.resume =	acm_resume,
+	.reset_resume =	acm_reset_resume,
+#endif
+	.pre_reset =	acm_pre_reset,
+	.id_table =	acm_ids,
+#ifdef CONFIG_PM
+	.supports_autosuspend = 1,
+#endif
+	.disable_hub_initiated_lpm = 1,
+};
+
+/*
+ * TTY driver structures.
+ */
+
+static const struct tty_operations acm_ops = {
+	.install =		acm_tty_install,
+	.open =			acm_tty_open,
+	.close =		acm_tty_close,
+	.cleanup =		acm_tty_cleanup,
+	.hangup =		acm_tty_hangup,
+	.write =		acm_tty_write,
+	.write_room =		acm_tty_write_room,
+	.ioctl =		acm_tty_ioctl,
+	.throttle =		acm_tty_throttle,
+	.unthrottle =		acm_tty_unthrottle,
+	.chars_in_buffer =	acm_tty_chars_in_buffer,
+	.break_ctl =		acm_tty_break_ctl,
+	.set_termios =		acm_tty_set_termios,
+	.tiocmget =		acm_tty_tiocmget,
+	.tiocmset =		acm_tty_tiocmset,
+	.get_serial =		get_serial_info,
+	.set_serial =		set_serial_info,
+	.get_icount =		acm_tty_get_icount,
+};
+
+/*
+ * Init / exit.
+ */
+
+static int __init acm_init(void)
+{
+	int retval;
+	acm_tty_driver = tty_alloc_driver(ACM_TTY_MINORS, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(acm_tty_driver))
+		return PTR_ERR(acm_tty_driver);
+	acm_tty_driver->driver_name = "acm",
+	acm_tty_driver->name = "ttyACM",
+	acm_tty_driver->major = ACM_TTY_MAJOR,
+	acm_tty_driver->minor_start = 0,
+	acm_tty_driver->type = TTY_DRIVER_TYPE_SERIAL,
+	acm_tty_driver->subtype = SERIAL_TYPE_NORMAL,
+	acm_tty_driver->init_termios = tty_std_termios;
+	acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD |
+								HUPCL | CLOCAL;
+	tty_set_operations(acm_tty_driver, &acm_ops);
+
+	retval = tty_register_driver(acm_tty_driver);
+	if (retval) {
+		tty_driver_kref_put(acm_tty_driver);
+		return retval;
+	}
+
+	retval = usb_register(&acm_driver);
+	if (retval) {
+		tty_unregister_driver(acm_tty_driver);
+		tty_driver_kref_put(acm_tty_driver);
+		return retval;
+	}
+
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
+
+	return 0;
+}
+
+static void __exit acm_exit(void)
+{
+	usb_deregister(&acm_driver);
+	tty_unregister_driver(acm_tty_driver);
+	tty_driver_kref_put(acm_tty_driver);
+	idr_destroy(&acm_minors);
+}
+
+module_init(acm_init);
+module_exit(acm_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(ACM_TTY_MAJOR);
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
new file mode 100644
index 000000000..759ac1563
--- /dev/null
+++ b/drivers/usb/class/cdc-acm.h
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *
+ * Includes for cdc-acm.c
+ *
+ * Mainly take from usbnet's cdc-ether part
+ *
+ */
+
+/*
+ * Major and minor numbers.
+ */
+
+#define ACM_TTY_MAJOR		166
+#define ACM_TTY_MINORS		256
+
+#define ACM_MINOR_INVALID	ACM_TTY_MINORS
+
+/*
+ * Requests.
+ */
+
+#define USB_RT_ACM		(USB_TYPE_CLASS | USB_RECIP_INTERFACE)
+
+/*
+ * Internal driver structures.
+ */
+
+/*
+ * The only reason to have several buffers is to accommodate assumptions
+ * in line disciplines. They ask for empty space amount, receive our URB size,
+ * and proceed to issue several 1-character writes, assuming they will fit.
+ * The very first write takes a complete URB. Fortunately, this only happens
+ * when processing onlcr, so we only need 2 buffers. These values must be
+ * powers of 2.
+ */
+#define ACM_NW  16
+#define ACM_NR  16
+
+struct acm_wb {
+	u8 *buf;
+	dma_addr_t dmah;
+	unsigned int len;
+	struct urb		*urb;
+	struct acm		*instance;
+	bool use;
+};
+
+struct acm_rb {
+	int			size;
+	unsigned char		*base;
+	dma_addr_t		dma;
+	int			index;
+	struct acm		*instance;
+};
+
+struct acm {
+	struct usb_device *dev;				/* the corresponding usb device */
+	struct usb_interface *control;			/* control interface */
+	struct usb_interface *data;			/* data interface */
+	unsigned in, out;				/* i/o pipes */
+	struct tty_port port;			 	/* our tty port data */
+	struct urb *ctrlurb;				/* urbs */
+	u8 *ctrl_buffer;				/* buffers of urbs */
+	dma_addr_t ctrl_dma;				/* dma handles of buffers */
+	u8 *country_codes;				/* country codes from device */
+	unsigned int country_code_size;			/* size of this buffer */
+	unsigned int country_rel_date;			/* release date of version */
+	struct acm_wb wb[ACM_NW];
+	unsigned long read_urbs_free;
+	struct urb *read_urbs[ACM_NR];
+	struct acm_rb read_buffers[ACM_NR];
+	int rx_buflimit;
+	spinlock_t read_lock;
+	u8 *notification_buffer;			/* to reassemble fragmented notifications */
+	unsigned int nb_index;
+	unsigned int nb_size;
+	int transmitting;
+	spinlock_t write_lock;
+	struct mutex mutex;
+	bool disconnected;
+	unsigned long flags;
+#		define EVENT_TTY_WAKEUP	0
+#		define EVENT_RX_STALL	1
+#		define ACM_THROTTLED	2
+#		define ACM_ERROR_DELAY	3
+	unsigned long urbs_in_error_delay;		/* these need to be restarted after a delay */
+	struct usb_cdc_line_coding line;		/* bits, stop, parity */
+	struct delayed_work dwork;		        /* work queue entry for various purposes */
+	unsigned int ctrlin;				/* input control lines (DCD, DSR, RI, break, overruns) */
+	unsigned int ctrlout;				/* output control lines (DTR, RTS) */
+	struct async_icount iocount;			/* counters for control line changes */
+	struct async_icount oldcount;			/* for comparison of counter */
+	wait_queue_head_t wioctl;			/* for ioctl */
+	unsigned int writesize;				/* max packet size for the output bulk endpoint */
+	unsigned int readsize,ctrlsize;			/* buffer sizes for freeing */
+	unsigned int minor;				/* acm minor number */
+	unsigned char clocal;				/* termios CLOCAL */
+	unsigned int ctrl_caps;				/* control capabilities from the class specific header */
+	unsigned int susp_count;			/* number of suspended interfaces */
+	unsigned int combined_interfaces:1;		/* control and data collapsed */
+	u8 bInterval;
+	struct usb_anchor delayed;			/* writes queued for a device about to be woken */
+	unsigned long quirks;
+};
+
+/* constants describing various quirks and errors */
+#define NO_UNION_NORMAL			BIT(0)
+#define SINGLE_RX_URB			BIT(1)
+#define NO_CAP_LINE			BIT(2)
+#define IGNORE_DEVICE			BIT(3)
+#define QUIRK_CONTROL_LINE_STATE	BIT(4)
+#define CLEAR_HALT_CONDITIONS		BIT(5)
+#define SEND_ZERO_PACKET		BIT(6)
+#define DISABLE_ECHO			BIT(7)
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
new file mode 100644
index 000000000..1f0951be1
--- /dev/null
+++ b/drivers/usb/class/cdc-wdm.c
@@ -0,0 +1,1371 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cdc-wdm.c
+ *
+ * This driver supports USB CDC WCM Device Management.
+ *
+ * Copyright (c) 2007-2009 Oliver Neukum
+ *
+ * Some code taken from cdc-acm.c
+ *
+ * Released under the GPLv2.
+ *
+ * Many thanks to Carl Nordbeck
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ioctl.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/bitops.h>
+#include <linux/poll.h>
+#include <linux/skbuff.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/wwan.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+#include <linux/usb/cdc-wdm.h>
+
+#define DRIVER_AUTHOR "Oliver Neukum"
+#define DRIVER_DESC "USB Abstract Control Model driver for USB WCM Device Management"
+
+static const struct usb_device_id wdm_ids[] = {
+	{
+		.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS |
+				 USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+		.bInterfaceClass = USB_CLASS_COMM,
+		.bInterfaceSubClass = USB_CDC_SUBCLASS_DMM
+	},
+	{ }
+};
+
+MODULE_DEVICE_TABLE (usb, wdm_ids);
+
+#define WDM_MINOR_BASE	176
+
+
+#define WDM_IN_USE		1
+#define WDM_DISCONNECTING	2
+#define WDM_RESULT		3
+#define WDM_READ		4
+#define WDM_INT_STALL		5
+#define WDM_POLL_RUNNING	6
+#define WDM_RESPONDING		7
+#define WDM_SUSPENDING		8
+#define WDM_RESETTING		9
+#define WDM_OVERFLOW		10
+#define WDM_WWAN_IN_USE		11
+
+#define WDM_MAX			16
+
+/* we cannot wait forever at flush() */
+#define WDM_FLUSH_TIMEOUT	(30 * HZ)
+
+/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */
+#define WDM_DEFAULT_BUFSIZE	256
+
+static DEFINE_MUTEX(wdm_mutex);
+static DEFINE_SPINLOCK(wdm_device_list_lock);
+static LIST_HEAD(wdm_device_list);
+
+/* --- method tables --- */
+
+struct wdm_device {
+	u8			*inbuf; /* buffer for response */
+	u8			*outbuf; /* buffer for command */
+	u8			*sbuf; /* buffer for status */
+	u8			*ubuf; /* buffer for copy to user space */
+
+	struct urb		*command;
+	struct urb		*response;
+	struct urb		*validity;
+	struct usb_interface	*intf;
+	struct usb_ctrlrequest	*orq;
+	struct usb_ctrlrequest	*irq;
+	spinlock_t		iuspin;
+
+	unsigned long		flags;
+	u16			bufsize;
+	u16			wMaxCommand;
+	u16			wMaxPacketSize;
+	__le16			inum;
+	int			reslength;
+	int			length;
+	int			read;
+	int			count;
+	dma_addr_t		shandle;
+	dma_addr_t		ihandle;
+	struct mutex		wlock;
+	struct mutex		rlock;
+	wait_queue_head_t	wait;
+	struct work_struct	rxwork;
+	struct work_struct	service_outs_intr;
+	int			werr;
+	int			rerr;
+	int                     resp_count;
+
+	struct list_head	device_list;
+	int			(*manage_power)(struct usb_interface *, int);
+
+	enum wwan_port_type	wwanp_type;
+	struct wwan_port	*wwanp;
+};
+
+static struct usb_driver wdm_driver;
+
+/* return intfdata if we own the interface, else look up intf in the list */
+static struct wdm_device *wdm_find_device(struct usb_interface *intf)
+{
+	struct wdm_device *desc;
+
+	spin_lock(&wdm_device_list_lock);
+	list_for_each_entry(desc, &wdm_device_list, device_list)
+		if (desc->intf == intf)
+			goto found;
+	desc = NULL;
+found:
+	spin_unlock(&wdm_device_list_lock);
+
+	return desc;
+}
+
+static struct wdm_device *wdm_find_device_by_minor(int minor)
+{
+	struct wdm_device *desc;
+
+	spin_lock(&wdm_device_list_lock);
+	list_for_each_entry(desc, &wdm_device_list, device_list)
+		if (desc->intf->minor == minor)
+			goto found;
+	desc = NULL;
+found:
+	spin_unlock(&wdm_device_list_lock);
+
+	return desc;
+}
+
+/* --- callbacks --- */
+static void wdm_out_callback(struct urb *urb)
+{
+	struct wdm_device *desc;
+	unsigned long flags;
+
+	desc = urb->context;
+	spin_lock_irqsave(&desc->iuspin, flags);
+	desc->werr = urb->status;
+	spin_unlock_irqrestore(&desc->iuspin, flags);
+	kfree(desc->outbuf);
+	desc->outbuf = NULL;
+	clear_bit(WDM_IN_USE, &desc->flags);
+	wake_up_all(&desc->wait);
+}
+
+static void wdm_wwan_rx(struct wdm_device *desc, int length);
+
+static void wdm_in_callback(struct urb *urb)
+{
+	unsigned long flags;
+	struct wdm_device *desc = urb->context;
+	int status = urb->status;
+	int length = urb->actual_length;
+
+	spin_lock_irqsave(&desc->iuspin, flags);
+	clear_bit(WDM_RESPONDING, &desc->flags);
+
+	if (status) {
+		switch (status) {
+		case -ENOENT:
+			dev_dbg(&desc->intf->dev,
+				"nonzero urb status received: -ENOENT\n");
+			goto skip_error;
+		case -ECONNRESET:
+			dev_dbg(&desc->intf->dev,
+				"nonzero urb status received: -ECONNRESET\n");
+			goto skip_error;
+		case -ESHUTDOWN:
+			dev_dbg(&desc->intf->dev,
+				"nonzero urb status received: -ESHUTDOWN\n");
+			goto skip_error;
+		case -EPIPE:
+			dev_err(&desc->intf->dev,
+				"nonzero urb status received: -EPIPE\n");
+			break;
+		default:
+			dev_err(&desc->intf->dev,
+				"Unexpected error %d\n", status);
+			break;
+		}
+	}
+
+	if (test_bit(WDM_WWAN_IN_USE, &desc->flags)) {
+		wdm_wwan_rx(desc, length);
+		goto out;
+	}
+
+	/*
+	 * only set a new error if there is no previous error.
+	 * Errors are only cleared during read/open
+	 * Avoid propagating -EPIPE (stall) to userspace since it is
+	 * better handled as an empty read
+	 */
+	if (desc->rerr == 0 && status != -EPIPE)
+		desc->rerr = status;
+
+	if (length + desc->length > desc->wMaxCommand) {
+		/* The buffer would overflow */
+		set_bit(WDM_OVERFLOW, &desc->flags);
+	} else {
+		/* we may already be in overflow */
+		if (!test_bit(WDM_OVERFLOW, &desc->flags)) {
+			memmove(desc->ubuf + desc->length, desc->inbuf, length);
+			desc->length += length;
+			desc->reslength = length;
+		}
+	}
+skip_error:
+
+	if (desc->rerr) {
+		/*
+		 * Since there was an error, userspace may decide to not read
+		 * any data after poll'ing.
+		 * We should respond to further attempts from the device to send
+		 * data, so that we can get unstuck.
+		 */
+		schedule_work(&desc->service_outs_intr);
+	} else {
+		set_bit(WDM_READ, &desc->flags);
+		wake_up(&desc->wait);
+	}
+out:
+	spin_unlock_irqrestore(&desc->iuspin, flags);
+}
+
+static void wdm_int_callback(struct urb *urb)
+{
+	unsigned long flags;
+	int rv = 0;
+	int responding;
+	int status = urb->status;
+	struct wdm_device *desc;
+	struct usb_cdc_notification *dr;
+
+	desc = urb->context;
+	dr = (struct usb_cdc_notification *)desc->sbuf;
+
+	if (status) {
+		switch (status) {
+		case -ESHUTDOWN:
+		case -ENOENT:
+		case -ECONNRESET:
+			return; /* unplug */
+		case -EPIPE:
+			set_bit(WDM_INT_STALL, &desc->flags);
+			dev_err(&desc->intf->dev, "Stall on int endpoint\n");
+			goto sw; /* halt is cleared in work */
+		default:
+			dev_err(&desc->intf->dev,
+				"nonzero urb status received: %d\n", status);
+			break;
+		}
+	}
+
+	if (urb->actual_length < sizeof(struct usb_cdc_notification)) {
+		dev_err(&desc->intf->dev, "wdm_int_callback - %d bytes\n",
+			urb->actual_length);
+		goto exit;
+	}
+
+	switch (dr->bNotificationType) {
+	case USB_CDC_NOTIFY_RESPONSE_AVAILABLE:
+		dev_dbg(&desc->intf->dev,
+			"NOTIFY_RESPONSE_AVAILABLE received: index %d len %d\n",
+			le16_to_cpu(dr->wIndex), le16_to_cpu(dr->wLength));
+		break;
+
+	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+
+		dev_dbg(&desc->intf->dev,
+			"NOTIFY_NETWORK_CONNECTION %s network\n",
+			dr->wValue ? "connected to" : "disconnected from");
+		goto exit;
+	case USB_CDC_NOTIFY_SPEED_CHANGE:
+		dev_dbg(&desc->intf->dev, "SPEED_CHANGE received (len %u)\n",
+			urb->actual_length);
+		goto exit;
+	default:
+		clear_bit(WDM_POLL_RUNNING, &desc->flags);
+		dev_err(&desc->intf->dev,
+			"unknown notification %d received: index %d len %d\n",
+			dr->bNotificationType,
+			le16_to_cpu(dr->wIndex),
+			le16_to_cpu(dr->wLength));
+		goto exit;
+	}
+
+	spin_lock_irqsave(&desc->iuspin, flags);
+	responding = test_and_set_bit(WDM_RESPONDING, &desc->flags);
+	if (!desc->resp_count++ && !responding
+		&& !test_bit(WDM_DISCONNECTING, &desc->flags)
+		&& !test_bit(WDM_SUSPENDING, &desc->flags)) {
+		rv = usb_submit_urb(desc->response, GFP_ATOMIC);
+		dev_dbg(&desc->intf->dev, "submit response URB %d\n", rv);
+	}
+	spin_unlock_irqrestore(&desc->iuspin, flags);
+	if (rv < 0) {
+		clear_bit(WDM_RESPONDING, &desc->flags);
+		if (rv == -EPERM)
+			return;
+		if (rv == -ENOMEM) {
+sw:
+			rv = schedule_work(&desc->rxwork);
+			if (rv)
+				dev_err(&desc->intf->dev,
+					"Cannot schedule work\n");
+		}
+	}
+exit:
+	rv = usb_submit_urb(urb, GFP_ATOMIC);
+	if (rv)
+		dev_err(&desc->intf->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			__func__, rv);
+
+}
+
+static void poison_urbs(struct wdm_device *desc)
+{
+	/* the order here is essential */
+	usb_poison_urb(desc->command);
+	usb_poison_urb(desc->validity);
+	usb_poison_urb(desc->response);
+}
+
+static void unpoison_urbs(struct wdm_device *desc)
+{
+	/*
+	 *  the order here is not essential
+	 *  it is symmetrical just to be nice
+	 */
+	usb_unpoison_urb(desc->response);
+	usb_unpoison_urb(desc->validity);
+	usb_unpoison_urb(desc->command);
+}
+
+static void free_urbs(struct wdm_device *desc)
+{
+	usb_free_urb(desc->validity);
+	usb_free_urb(desc->response);
+	usb_free_urb(desc->command);
+}
+
+static void cleanup(struct wdm_device *desc)
+{
+	kfree(desc->sbuf);
+	kfree(desc->inbuf);
+	kfree(desc->orq);
+	kfree(desc->irq);
+	kfree(desc->ubuf);
+	free_urbs(desc);
+	kfree(desc);
+}
+
+static ssize_t wdm_write
+(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
+{
+	u8 *buf;
+	int rv = -EMSGSIZE, r, we;
+	struct wdm_device *desc = file->private_data;
+	struct usb_ctrlrequest *req;
+
+	if (count > desc->wMaxCommand)
+		count = desc->wMaxCommand;
+
+	spin_lock_irq(&desc->iuspin);
+	we = desc->werr;
+	desc->werr = 0;
+	spin_unlock_irq(&desc->iuspin);
+	if (we < 0)
+		return usb_translate_errors(we);
+
+	buf = memdup_user(buffer, count);
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
+
+	/* concurrent writes and disconnect */
+	r = mutex_lock_interruptible(&desc->wlock);
+	rv = -ERESTARTSYS;
+	if (r)
+		goto out_free_mem;
+
+	if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+		rv = -ENODEV;
+		goto out_free_mem_lock;
+	}
+
+	r = usb_autopm_get_interface(desc->intf);
+	if (r < 0) {
+		rv = usb_translate_errors(r);
+		goto out_free_mem_lock;
+	}
+
+	if (!(file->f_flags & O_NONBLOCK))
+		r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE,
+								&desc->flags));
+	else
+		if (test_bit(WDM_IN_USE, &desc->flags))
+			r = -EAGAIN;
+
+	if (test_bit(WDM_RESETTING, &desc->flags))
+		r = -EIO;
+
+	if (test_bit(WDM_DISCONNECTING, &desc->flags))
+		r = -ENODEV;
+
+	if (r < 0) {
+		rv = r;
+		goto out_free_mem_pm;
+	}
+
+	req = desc->orq;
+	usb_fill_control_urb(
+		desc->command,
+		interface_to_usbdev(desc->intf),
+		/* using common endpoint 0 */
+		usb_sndctrlpipe(interface_to_usbdev(desc->intf), 0),
+		(unsigned char *)req,
+		buf,
+		count,
+		wdm_out_callback,
+		desc
+	);
+
+	req->bRequestType = (USB_DIR_OUT | USB_TYPE_CLASS |
+			     USB_RECIP_INTERFACE);
+	req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
+	req->wValue = 0;
+	req->wIndex = desc->inum; /* already converted */
+	req->wLength = cpu_to_le16(count);
+	set_bit(WDM_IN_USE, &desc->flags);
+	desc->outbuf = buf;
+
+	rv = usb_submit_urb(desc->command, GFP_KERNEL);
+	if (rv < 0) {
+		desc->outbuf = NULL;
+		clear_bit(WDM_IN_USE, &desc->flags);
+		wake_up_all(&desc->wait); /* for wdm_wait_for_response() */
+		dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
+		rv = usb_translate_errors(rv);
+		goto out_free_mem_pm;
+	} else {
+		dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d\n",
+			le16_to_cpu(req->wIndex));
+	}
+
+	usb_autopm_put_interface(desc->intf);
+	mutex_unlock(&desc->wlock);
+	return count;
+
+out_free_mem_pm:
+	usb_autopm_put_interface(desc->intf);
+out_free_mem_lock:
+	mutex_unlock(&desc->wlock);
+out_free_mem:
+	kfree(buf);
+	return rv;
+}
+
+/*
+ * Submit the read urb if resp_count is non-zero.
+ *
+ * Called with desc->iuspin locked
+ */
+static int service_outstanding_interrupt(struct wdm_device *desc)
+{
+	int rv = 0;
+
+	/* submit read urb only if the device is waiting for it */
+	if (!desc->resp_count || !--desc->resp_count)
+		goto out;
+
+	if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+		rv = -ENODEV;
+		goto out;
+	}
+	if (test_bit(WDM_RESETTING, &desc->flags)) {
+		rv = -EIO;
+		goto out;
+	}
+
+	set_bit(WDM_RESPONDING, &desc->flags);
+	spin_unlock_irq(&desc->iuspin);
+	rv = usb_submit_urb(desc->response, GFP_KERNEL);
+	spin_lock_irq(&desc->iuspin);
+	if (rv) {
+		if (!test_bit(WDM_DISCONNECTING, &desc->flags))
+			dev_err(&desc->intf->dev,
+				"usb_submit_urb failed with result %d\n", rv);
+
+		/* make sure the next notification trigger a submit */
+		clear_bit(WDM_RESPONDING, &desc->flags);
+		desc->resp_count = 0;
+	}
+out:
+	return rv;
+}
+
+static ssize_t wdm_read
+(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
+{
+	int rv, cntr;
+	int i = 0;
+	struct wdm_device *desc = file->private_data;
+
+
+	rv = mutex_lock_interruptible(&desc->rlock); /*concurrent reads */
+	if (rv < 0)
+		return -ERESTARTSYS;
+
+	cntr = READ_ONCE(desc->length);
+	if (cntr == 0) {
+		desc->read = 0;
+retry:
+		if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+			rv = -ENODEV;
+			goto err;
+		}
+		if (test_bit(WDM_OVERFLOW, &desc->flags)) {
+			clear_bit(WDM_OVERFLOW, &desc->flags);
+			rv = -ENOBUFS;
+			goto err;
+		}
+		i++;
+		if (file->f_flags & O_NONBLOCK) {
+			if (!test_bit(WDM_READ, &desc->flags)) {
+				rv = -EAGAIN;
+				goto err;
+			}
+			rv = 0;
+		} else {
+			rv = wait_event_interruptible(desc->wait,
+				test_bit(WDM_READ, &desc->flags));
+		}
+
+		/* may have happened while we slept */
+		if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+			rv = -ENODEV;
+			goto err;
+		}
+		if (test_bit(WDM_RESETTING, &desc->flags)) {
+			rv = -EIO;
+			goto err;
+		}
+		usb_mark_last_busy(interface_to_usbdev(desc->intf));
+		if (rv < 0) {
+			rv = -ERESTARTSYS;
+			goto err;
+		}
+
+		spin_lock_irq(&desc->iuspin);
+
+		if (desc->rerr) { /* read completed, error happened */
+			rv = usb_translate_errors(desc->rerr);
+			desc->rerr = 0;
+			spin_unlock_irq(&desc->iuspin);
+			goto err;
+		}
+		/*
+		 * recheck whether we've lost the race
+		 * against the completion handler
+		 */
+		if (!test_bit(WDM_READ, &desc->flags)) { /* lost race */
+			spin_unlock_irq(&desc->iuspin);
+			goto retry;
+		}
+
+		if (!desc->reslength) { /* zero length read */
+			dev_dbg(&desc->intf->dev, "zero length - clearing WDM_READ\n");
+			clear_bit(WDM_READ, &desc->flags);
+			rv = service_outstanding_interrupt(desc);
+			spin_unlock_irq(&desc->iuspin);
+			if (rv < 0)
+				goto err;
+			goto retry;
+		}
+		cntr = desc->length;
+		spin_unlock_irq(&desc->iuspin);
+	}
+
+	if (cntr > count)
+		cntr = count;
+	rv = copy_to_user(buffer, desc->ubuf, cntr);
+	if (rv > 0) {
+		rv = -EFAULT;
+		goto err;
+	}
+
+	spin_lock_irq(&desc->iuspin);
+
+	for (i = 0; i < desc->length - cntr; i++)
+		desc->ubuf[i] = desc->ubuf[i + cntr];
+
+	desc->length -= cntr;
+	/* in case we had outstanding data */
+	if (!desc->length) {
+		clear_bit(WDM_READ, &desc->flags);
+		service_outstanding_interrupt(desc);
+	}
+	spin_unlock_irq(&desc->iuspin);
+	rv = cntr;
+
+err:
+	mutex_unlock(&desc->rlock);
+	return rv;
+}
+
+static int wdm_wait_for_response(struct file *file, long timeout)
+{
+	struct wdm_device *desc = file->private_data;
+	long rv; /* Use long here because (int) MAX_SCHEDULE_TIMEOUT < 0. */
+
+	/*
+	 * Needs both flags. We cannot do with one because resetting it would
+	 * cause a race with write() yet we need to signal a disconnect.
+	 */
+	rv = wait_event_interruptible_timeout(desc->wait,
+			      !test_bit(WDM_IN_USE, &desc->flags) ||
+			      test_bit(WDM_DISCONNECTING, &desc->flags),
+			      timeout);
+
+	/*
+	 * To report the correct error. This is best effort.
+	 * We are inevitably racing with the hardware.
+	 */
+	if (test_bit(WDM_DISCONNECTING, &desc->flags))
+		return -ENODEV;
+	if (!rv)
+		return -EIO;
+	if (rv < 0)
+		return -EINTR;
+
+	spin_lock_irq(&desc->iuspin);
+	rv = desc->werr;
+	desc->werr = 0;
+	spin_unlock_irq(&desc->iuspin);
+
+	return usb_translate_errors(rv);
+
+}
+
+/*
+ * You need to send a signal when you react to malicious or defective hardware.
+ * Also, don't abort when fsync() returned -EINVAL, for older kernels which do
+ * not implement wdm_flush() will return -EINVAL.
+ */
+static int wdm_fsync(struct file *file, loff_t start, loff_t end, int datasync)
+{
+	return wdm_wait_for_response(file, MAX_SCHEDULE_TIMEOUT);
+}
+
+/*
+ * Same with wdm_fsync(), except it uses finite timeout in order to react to
+ * malicious or defective hardware which ceased communication after close() was
+ * implicitly called due to process termination.
+ */
+static int wdm_flush(struct file *file, fl_owner_t id)
+{
+	return wdm_wait_for_response(file, WDM_FLUSH_TIMEOUT);
+}
+
+static __poll_t wdm_poll(struct file *file, struct poll_table_struct *wait)
+{
+	struct wdm_device *desc = file->private_data;
+	unsigned long flags;
+	__poll_t mask = 0;
+
+	spin_lock_irqsave(&desc->iuspin, flags);
+	if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+		mask = EPOLLHUP | EPOLLERR;
+		spin_unlock_irqrestore(&desc->iuspin, flags);
+		goto desc_out;
+	}
+	if (test_bit(WDM_READ, &desc->flags))
+		mask = EPOLLIN | EPOLLRDNORM;
+	if (desc->rerr || desc->werr)
+		mask |= EPOLLERR;
+	if (!test_bit(WDM_IN_USE, &desc->flags))
+		mask |= EPOLLOUT | EPOLLWRNORM;
+	spin_unlock_irqrestore(&desc->iuspin, flags);
+
+	poll_wait(file, &desc->wait, wait);
+
+desc_out:
+	return mask;
+}
+
+static int wdm_open(struct inode *inode, struct file *file)
+{
+	int minor = iminor(inode);
+	int rv = -ENODEV;
+	struct usb_interface *intf;
+	struct wdm_device *desc;
+
+	mutex_lock(&wdm_mutex);
+	desc = wdm_find_device_by_minor(minor);
+	if (!desc)
+		goto out;
+
+	intf = desc->intf;
+	if (test_bit(WDM_DISCONNECTING, &desc->flags))
+		goto out;
+	file->private_data = desc;
+
+	if (test_bit(WDM_WWAN_IN_USE, &desc->flags)) {
+		rv = -EBUSY;
+		goto out;
+	}
+
+	rv = usb_autopm_get_interface(desc->intf);
+	if (rv < 0) {
+		dev_err(&desc->intf->dev, "Error autopm - %d\n", rv);
+		goto out;
+	}
+
+	/* using write lock to protect desc->count */
+	mutex_lock(&desc->wlock);
+	if (!desc->count++) {
+		desc->werr = 0;
+		desc->rerr = 0;
+		rv = usb_submit_urb(desc->validity, GFP_KERNEL);
+		if (rv < 0) {
+			desc->count--;
+			dev_err(&desc->intf->dev,
+				"Error submitting int urb - %d\n", rv);
+			rv = usb_translate_errors(rv);
+		}
+	} else {
+		rv = 0;
+	}
+	mutex_unlock(&desc->wlock);
+	if (desc->count == 1)
+		desc->manage_power(intf, 1);
+	usb_autopm_put_interface(desc->intf);
+out:
+	mutex_unlock(&wdm_mutex);
+	return rv;
+}
+
+static int wdm_release(struct inode *inode, struct file *file)
+{
+	struct wdm_device *desc = file->private_data;
+
+	mutex_lock(&wdm_mutex);
+
+	/* using write lock to protect desc->count */
+	mutex_lock(&desc->wlock);
+	desc->count--;
+	mutex_unlock(&desc->wlock);
+
+	if (!desc->count) {
+		if (!test_bit(WDM_DISCONNECTING, &desc->flags)) {
+			dev_dbg(&desc->intf->dev, "wdm_release: cleanup\n");
+			poison_urbs(desc);
+			spin_lock_irq(&desc->iuspin);
+			desc->resp_count = 0;
+			clear_bit(WDM_RESPONDING, &desc->flags);
+			spin_unlock_irq(&desc->iuspin);
+			desc->manage_power(desc->intf, 0);
+			unpoison_urbs(desc);
+		} else {
+			/* must avoid dev_printk here as desc->intf is invalid */
+			pr_debug(KBUILD_MODNAME " %s: device gone - cleaning up\n", __func__);
+			cleanup(desc);
+		}
+	}
+	mutex_unlock(&wdm_mutex);
+	return 0;
+}
+
+static long wdm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct wdm_device *desc = file->private_data;
+	int rv = 0;
+
+	switch (cmd) {
+	case IOCTL_WDM_MAX_COMMAND:
+		if (copy_to_user((void __user *)arg, &desc->wMaxCommand, sizeof(desc->wMaxCommand)))
+			rv = -EFAULT;
+		break;
+	default:
+		rv = -ENOTTY;
+	}
+	return rv;
+}
+
+static const struct file_operations wdm_fops = {
+	.owner =	THIS_MODULE,
+	.read =		wdm_read,
+	.write =	wdm_write,
+	.fsync =	wdm_fsync,
+	.open =		wdm_open,
+	.flush =	wdm_flush,
+	.release =	wdm_release,
+	.poll =		wdm_poll,
+	.unlocked_ioctl = wdm_ioctl,
+	.compat_ioctl = compat_ptr_ioctl,
+	.llseek =	noop_llseek,
+};
+
+static struct usb_class_driver wdm_class = {
+	.name =		"cdc-wdm%d",
+	.fops =		&wdm_fops,
+	.minor_base =	WDM_MINOR_BASE,
+};
+
+/* --- WWAN framework integration --- */
+#ifdef CONFIG_WWAN
+static int wdm_wwan_port_start(struct wwan_port *port)
+{
+	struct wdm_device *desc = wwan_port_get_drvdata(port);
+
+	/* The interface is both exposed via the WWAN framework and as a
+	 * legacy usbmisc chardev. If chardev is already open, just fail
+	 * to prevent concurrent usage. Otherwise, switch to WWAN mode.
+	 */
+	mutex_lock(&wdm_mutex);
+	if (desc->count) {
+		mutex_unlock(&wdm_mutex);
+		return -EBUSY;
+	}
+	set_bit(WDM_WWAN_IN_USE, &desc->flags);
+	mutex_unlock(&wdm_mutex);
+
+	desc->manage_power(desc->intf, 1);
+
+	/* tx is allowed */
+	wwan_port_txon(port);
+
+	/* Start getting events */
+	return usb_submit_urb(desc->validity, GFP_KERNEL);
+}
+
+static void wdm_wwan_port_stop(struct wwan_port *port)
+{
+	struct wdm_device *desc = wwan_port_get_drvdata(port);
+
+	/* Stop all transfers and disable WWAN mode */
+	poison_urbs(desc);
+	desc->manage_power(desc->intf, 0);
+	clear_bit(WDM_READ, &desc->flags);
+	clear_bit(WDM_WWAN_IN_USE, &desc->flags);
+	unpoison_urbs(desc);
+}
+
+static void wdm_wwan_port_tx_complete(struct urb *urb)
+{
+	struct sk_buff *skb = urb->context;
+	struct wdm_device *desc = skb_shinfo(skb)->destructor_arg;
+
+	usb_autopm_put_interface(desc->intf);
+	wwan_port_txon(desc->wwanp);
+	kfree_skb(skb);
+}
+
+static int wdm_wwan_port_tx(struct wwan_port *port, struct sk_buff *skb)
+{
+	struct wdm_device *desc = wwan_port_get_drvdata(port);
+	struct usb_interface *intf = desc->intf;
+	struct usb_ctrlrequest *req = desc->orq;
+	int rv;
+
+	rv = usb_autopm_get_interface(intf);
+	if (rv)
+		return rv;
+
+	usb_fill_control_urb(
+		desc->command,
+		interface_to_usbdev(intf),
+		usb_sndctrlpipe(interface_to_usbdev(intf), 0),
+		(unsigned char *)req,
+		skb->data,
+		skb->len,
+		wdm_wwan_port_tx_complete,
+		skb
+	);
+
+	req->bRequestType = (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE);
+	req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
+	req->wValue = 0;
+	req->wIndex = desc->inum;
+	req->wLength = cpu_to_le16(skb->len);
+
+	skb_shinfo(skb)->destructor_arg = desc;
+
+	rv = usb_submit_urb(desc->command, GFP_KERNEL);
+	if (rv)
+		usb_autopm_put_interface(intf);
+	else /* One transfer at a time, stop TX until URB completion */
+		wwan_port_txoff(port);
+
+	return rv;
+}
+
+static const struct wwan_port_ops wdm_wwan_port_ops = {
+	.start = wdm_wwan_port_start,
+	.stop = wdm_wwan_port_stop,
+	.tx = wdm_wwan_port_tx,
+};
+
+static void wdm_wwan_init(struct wdm_device *desc)
+{
+	struct usb_interface *intf = desc->intf;
+	struct wwan_port *port;
+
+	/* Only register to WWAN core if protocol/type is known */
+	if (desc->wwanp_type == WWAN_PORT_UNKNOWN) {
+		dev_info(&intf->dev, "Unknown control protocol\n");
+		return;
+	}
+
+	port = wwan_create_port(&intf->dev, desc->wwanp_type, &wdm_wwan_port_ops, desc);
+	if (IS_ERR(port)) {
+		dev_err(&intf->dev, "%s: Unable to create WWAN port\n",
+			dev_name(intf->usb_dev));
+		return;
+	}
+
+	desc->wwanp = port;
+}
+
+static void wdm_wwan_deinit(struct wdm_device *desc)
+{
+	if (!desc->wwanp)
+		return;
+
+	wwan_remove_port(desc->wwanp);
+	desc->wwanp = NULL;
+}
+
+static void wdm_wwan_rx(struct wdm_device *desc, int length)
+{
+	struct wwan_port *port = desc->wwanp;
+	struct sk_buff *skb;
+
+	/* Forward data to WWAN port */
+	skb = alloc_skb(length, GFP_ATOMIC);
+	if (!skb)
+		return;
+
+	skb_put_data(skb, desc->inbuf, length);
+	wwan_port_rx(port, skb);
+
+	/* inbuf has been copied, it is safe to check for outstanding data */
+	schedule_work(&desc->service_outs_intr);
+}
+#else /* CONFIG_WWAN */
+static void wdm_wwan_init(struct wdm_device *desc) {}
+static void wdm_wwan_deinit(struct wdm_device *desc) {}
+static void wdm_wwan_rx(struct wdm_device *desc, int length) {}
+#endif /* CONFIG_WWAN */
+
+/* --- error handling --- */
+static void wdm_rxwork(struct work_struct *work)
+{
+	struct wdm_device *desc = container_of(work, struct wdm_device, rxwork);
+	unsigned long flags;
+	int rv = 0;
+	int responding;
+
+	spin_lock_irqsave(&desc->iuspin, flags);
+	if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+		spin_unlock_irqrestore(&desc->iuspin, flags);
+	} else {
+		responding = test_and_set_bit(WDM_RESPONDING, &desc->flags);
+		spin_unlock_irqrestore(&desc->iuspin, flags);
+		if (!responding)
+			rv = usb_submit_urb(desc->response, GFP_KERNEL);
+		if (rv < 0 && rv != -EPERM) {
+			spin_lock_irqsave(&desc->iuspin, flags);
+			clear_bit(WDM_RESPONDING, &desc->flags);
+			if (!test_bit(WDM_DISCONNECTING, &desc->flags))
+				schedule_work(&desc->rxwork);
+			spin_unlock_irqrestore(&desc->iuspin, flags);
+		}
+	}
+}
+
+static void service_interrupt_work(struct work_struct *work)
+{
+	struct wdm_device *desc;
+
+	desc = container_of(work, struct wdm_device, service_outs_intr);
+
+	spin_lock_irq(&desc->iuspin);
+	service_outstanding_interrupt(desc);
+	if (!desc->resp_count) {
+		set_bit(WDM_READ, &desc->flags);
+		wake_up(&desc->wait);
+	}
+	spin_unlock_irq(&desc->iuspin);
+}
+
+/* --- hotplug --- */
+
+static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor *ep,
+		      u16 bufsize, enum wwan_port_type type,
+		      int (*manage_power)(struct usb_interface *, int))
+{
+	int rv = -ENOMEM;
+	struct wdm_device *desc;
+
+	desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL);
+	if (!desc)
+		goto out;
+	INIT_LIST_HEAD(&desc->device_list);
+	mutex_init(&desc->rlock);
+	mutex_init(&desc->wlock);
+	spin_lock_init(&desc->iuspin);
+	init_waitqueue_head(&desc->wait);
+	desc->wMaxCommand = bufsize;
+	/* this will be expanded and needed in hardware endianness */
+	desc->inum = cpu_to_le16((u16)intf->cur_altsetting->desc.bInterfaceNumber);
+	desc->intf = intf;
+	desc->wwanp_type = type;
+	INIT_WORK(&desc->rxwork, wdm_rxwork);
+	INIT_WORK(&desc->service_outs_intr, service_interrupt_work);
+
+	if (!usb_endpoint_is_int_in(ep)) {
+		rv = -EINVAL;
+		goto err;
+	}
+
+	desc->wMaxPacketSize = usb_endpoint_maxp(ep);
+
+	desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+	if (!desc->orq)
+		goto err;
+	desc->irq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+	if (!desc->irq)
+		goto err;
+
+	desc->validity = usb_alloc_urb(0, GFP_KERNEL);
+	if (!desc->validity)
+		goto err;
+
+	desc->response = usb_alloc_urb(0, GFP_KERNEL);
+	if (!desc->response)
+		goto err;
+
+	desc->command = usb_alloc_urb(0, GFP_KERNEL);
+	if (!desc->command)
+		goto err;
+
+	desc->ubuf = kmalloc(desc->wMaxCommand, GFP_KERNEL);
+	if (!desc->ubuf)
+		goto err;
+
+	desc->sbuf = kmalloc(desc->wMaxPacketSize, GFP_KERNEL);
+	if (!desc->sbuf)
+		goto err;
+
+	desc->inbuf = kmalloc(desc->wMaxCommand, GFP_KERNEL);
+	if (!desc->inbuf)
+		goto err;
+
+	usb_fill_int_urb(
+		desc->validity,
+		interface_to_usbdev(intf),
+		usb_rcvintpipe(interface_to_usbdev(intf), ep->bEndpointAddress),
+		desc->sbuf,
+		desc->wMaxPacketSize,
+		wdm_int_callback,
+		desc,
+		ep->bInterval
+	);
+
+	desc->irq->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE);
+	desc->irq->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
+	desc->irq->wValue = 0;
+	desc->irq->wIndex = desc->inum; /* already converted */
+	desc->irq->wLength = cpu_to_le16(desc->wMaxCommand);
+
+	usb_fill_control_urb(
+		desc->response,
+		interface_to_usbdev(intf),
+		/* using common endpoint 0 */
+		usb_rcvctrlpipe(interface_to_usbdev(desc->intf), 0),
+		(unsigned char *)desc->irq,
+		desc->inbuf,
+		desc->wMaxCommand,
+		wdm_in_callback,
+		desc
+	);
+
+	desc->manage_power = manage_power;
+
+	spin_lock(&wdm_device_list_lock);
+	list_add(&desc->device_list, &wdm_device_list);
+	spin_unlock(&wdm_device_list_lock);
+
+	rv = usb_register_dev(intf, &wdm_class);
+	if (rv < 0)
+		goto err;
+	else
+		dev_info(&intf->dev, "%s: USB WDM device\n", dev_name(intf->usb_dev));
+
+	wdm_wwan_init(desc);
+
+out:
+	return rv;
+err:
+	spin_lock(&wdm_device_list_lock);
+	list_del(&desc->device_list);
+	spin_unlock(&wdm_device_list_lock);
+	cleanup(desc);
+	return rv;
+}
+
+static int wdm_manage_power(struct usb_interface *intf, int on)
+{
+	/* need autopm_get/put here to ensure the usbcore sees the new value */
+	int rv = usb_autopm_get_interface(intf);
+
+	intf->needs_remote_wakeup = on;
+	if (!rv)
+		usb_autopm_put_interface(intf);
+	return 0;
+}
+
+static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	int rv = -EINVAL;
+	struct usb_host_interface *iface;
+	struct usb_endpoint_descriptor *ep;
+	struct usb_cdc_parsed_header hdr;
+	u8 *buffer = intf->altsetting->extra;
+	int buflen = intf->altsetting->extralen;
+	u16 maxcom = WDM_DEFAULT_BUFSIZE;
+
+	if (!buffer)
+		goto err;
+
+	cdc_parse_cdc_header(&hdr, intf, buffer, buflen);
+
+	if (hdr.usb_cdc_dmm_desc)
+		maxcom = le16_to_cpu(hdr.usb_cdc_dmm_desc->wMaxCommand);
+
+	iface = intf->cur_altsetting;
+	if (iface->desc.bNumEndpoints != 1)
+		goto err;
+	ep = &iface->endpoint[0].desc;
+
+	rv = wdm_create(intf, ep, maxcom, WWAN_PORT_UNKNOWN, &wdm_manage_power);
+
+err:
+	return rv;
+}
+
+/**
+ * usb_cdc_wdm_register - register a WDM subdriver
+ * @intf: usb interface the subdriver will associate with
+ * @ep: interrupt endpoint to monitor for notifications
+ * @bufsize: maximum message size to support for read/write
+ * @type: Type/protocol of the transported data (MBIM, QMI...)
+ * @manage_power: call-back invoked during open and release to
+ *                manage the device's power
+ * Create WDM usb class character device and associate it with intf
+ * without binding, allowing another driver to manage the interface.
+ *
+ * The subdriver will manage the given interrupt endpoint exclusively
+ * and will issue control requests referring to the given intf. It
+ * will otherwise avoid interferring, and in particular not do
+ * usb_set_intfdata/usb_get_intfdata on intf.
+ *
+ * The return value is a pointer to the subdriver's struct usb_driver.
+ * The registering driver is responsible for calling this subdriver's
+ * disconnect, suspend, resume, pre_reset and post_reset methods from
+ * its own.
+ */
+struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf,
+					struct usb_endpoint_descriptor *ep,
+					int bufsize, enum wwan_port_type type,
+					int (*manage_power)(struct usb_interface *, int))
+{
+	int rv;
+
+	rv = wdm_create(intf, ep, bufsize, type, manage_power);
+	if (rv < 0)
+		goto err;
+
+	return &wdm_driver;
+err:
+	return ERR_PTR(rv);
+}
+EXPORT_SYMBOL(usb_cdc_wdm_register);
+
+static void wdm_disconnect(struct usb_interface *intf)
+{
+	struct wdm_device *desc;
+	unsigned long flags;
+
+	usb_deregister_dev(intf, &wdm_class);
+	desc = wdm_find_device(intf);
+	mutex_lock(&wdm_mutex);
+
+	wdm_wwan_deinit(desc);
+
+	/* the spinlock makes sure no new urbs are generated in the callbacks */
+	spin_lock_irqsave(&desc->iuspin, flags);
+	set_bit(WDM_DISCONNECTING, &desc->flags);
+	set_bit(WDM_READ, &desc->flags);
+	spin_unlock_irqrestore(&desc->iuspin, flags);
+	wake_up_all(&desc->wait);
+	mutex_lock(&desc->rlock);
+	mutex_lock(&desc->wlock);
+	poison_urbs(desc);
+	cancel_work_sync(&desc->rxwork);
+	cancel_work_sync(&desc->service_outs_intr);
+	mutex_unlock(&desc->wlock);
+	mutex_unlock(&desc->rlock);
+
+	/* the desc->intf pointer used as list key is now invalid */
+	spin_lock(&wdm_device_list_lock);
+	list_del(&desc->device_list);
+	spin_unlock(&wdm_device_list_lock);
+
+	if (!desc->count)
+		cleanup(desc);
+	else
+		dev_dbg(&intf->dev, "%d open files - postponing cleanup\n", desc->count);
+	mutex_unlock(&wdm_mutex);
+}
+
+#ifdef CONFIG_PM
+static int wdm_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct wdm_device *desc = wdm_find_device(intf);
+	int rv = 0;
+
+	dev_dbg(&desc->intf->dev, "wdm%d_suspend\n", intf->minor);
+
+	/* if this is an autosuspend the caller does the locking */
+	if (!PMSG_IS_AUTO(message)) {
+		mutex_lock(&desc->rlock);
+		mutex_lock(&desc->wlock);
+	}
+	spin_lock_irq(&desc->iuspin);
+
+	if (PMSG_IS_AUTO(message) &&
+			(test_bit(WDM_IN_USE, &desc->flags)
+			|| test_bit(WDM_RESPONDING, &desc->flags))) {
+		spin_unlock_irq(&desc->iuspin);
+		rv = -EBUSY;
+	} else {
+
+		set_bit(WDM_SUSPENDING, &desc->flags);
+		spin_unlock_irq(&desc->iuspin);
+		/* callback submits work - order is essential */
+		poison_urbs(desc);
+		cancel_work_sync(&desc->rxwork);
+		cancel_work_sync(&desc->service_outs_intr);
+		unpoison_urbs(desc);
+	}
+	if (!PMSG_IS_AUTO(message)) {
+		mutex_unlock(&desc->wlock);
+		mutex_unlock(&desc->rlock);
+	}
+
+	return rv;
+}
+#endif
+
+static int recover_from_urb_loss(struct wdm_device *desc)
+{
+	int rv = 0;
+
+	if (desc->count) {
+		rv = usb_submit_urb(desc->validity, GFP_NOIO);
+		if (rv < 0)
+			dev_err(&desc->intf->dev,
+				"Error resume submitting int urb - %d\n", rv);
+	}
+	return rv;
+}
+
+#ifdef CONFIG_PM
+static int wdm_resume(struct usb_interface *intf)
+{
+	struct wdm_device *desc = wdm_find_device(intf);
+	int rv;
+
+	dev_dbg(&desc->intf->dev, "wdm%d_resume\n", intf->minor);
+
+	clear_bit(WDM_SUSPENDING, &desc->flags);
+	rv = recover_from_urb_loss(desc);
+
+	return rv;
+}
+#endif
+
+static int wdm_pre_reset(struct usb_interface *intf)
+{
+	struct wdm_device *desc = wdm_find_device(intf);
+
+	/*
+	 * we notify everybody using poll of
+	 * an exceptional situation
+	 * must be done before recovery lest a spontaneous
+	 * message from the device is lost
+	 */
+	spin_lock_irq(&desc->iuspin);
+	set_bit(WDM_RESETTING, &desc->flags);	/* inform read/write */
+	set_bit(WDM_READ, &desc->flags);	/* unblock read */
+	clear_bit(WDM_IN_USE, &desc->flags);	/* unblock write */
+	desc->rerr = -EINTR;
+	spin_unlock_irq(&desc->iuspin);
+	wake_up_all(&desc->wait);
+	mutex_lock(&desc->rlock);
+	mutex_lock(&desc->wlock);
+	poison_urbs(desc);
+	cancel_work_sync(&desc->rxwork);
+	cancel_work_sync(&desc->service_outs_intr);
+	return 0;
+}
+
+static int wdm_post_reset(struct usb_interface *intf)
+{
+	struct wdm_device *desc = wdm_find_device(intf);
+	int rv;
+
+	unpoison_urbs(desc);
+	clear_bit(WDM_OVERFLOW, &desc->flags);
+	clear_bit(WDM_RESETTING, &desc->flags);
+	rv = recover_from_urb_loss(desc);
+	mutex_unlock(&desc->wlock);
+	mutex_unlock(&desc->rlock);
+	return rv;
+}
+
+static struct usb_driver wdm_driver = {
+	.name =		"cdc_wdm",
+	.probe =	wdm_probe,
+	.disconnect =	wdm_disconnect,
+#ifdef CONFIG_PM
+	.suspend =	wdm_suspend,
+	.resume =	wdm_resume,
+	.reset_resume =	wdm_resume,
+#endif
+	.pre_reset =	wdm_pre_reset,
+	.post_reset =	wdm_post_reset,
+	.id_table =	wdm_ids,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(wdm_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
new file mode 100644
index 000000000..f27b4aecf
--- /dev/null
+++ b/drivers/usb/class/usblp.c
@@ -0,0 +1,1474 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * usblp.c
+ *
+ * Copyright (c) 1999 Michael Gee	<michael@linuxspecific.com>
+ * Copyright (c) 1999 Pavel Machek	<pavel@ucw.cz>
+ * Copyright (c) 2000 Randy Dunlap	<rdunlap@xenotime.net>
+ * Copyright (c) 2000 Vojtech Pavlik	<vojtech@suse.cz>
+ # Copyright (c) 2001 Pete Zaitcev	<zaitcev@redhat.com>
+ # Copyright (c) 2001 David Paschal	<paschal@rcsis.com>
+ * Copyright (c) 2006 Oliver Neukum	<oliver@neukum.name>
+ *
+ * USB Printer Device Class driver for USB printers and printer cables
+ *
+ * Sponsored by SuSE
+ *
+ * ChangeLog:
+ *	v0.1 - thorough cleaning, URBification, almost a rewrite
+ *	v0.2 - some more cleanups
+ *	v0.3 - cleaner again, waitqueue fixes
+ *	v0.4 - fixes in unidirectional mode
+ *	v0.5 - add DEVICE_ID string support
+ *	v0.6 - never time out
+ *	v0.7 - fixed bulk-IN read and poll (David Paschal)
+ *	v0.8 - add devfs support
+ *	v0.9 - fix unplug-while-open paths
+ *	v0.10- remove sleep_on, fix error on oom (oliver@neukum.org)
+ *	v0.11 - add proto_bias option (Pete Zaitcev)
+ *	v0.12 - add hpoj.sourceforge.net ioctls (David Paschal)
+ *	v0.13 - alloc space for statusbuf (<status> not on stack);
+ *		use usb_alloc_coherent() for read buf & write buf;
+ *      none  - Maintained in Linux kernel after v0.13
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched/signal.h>
+#include <linux/signal.h>
+#include <linux/poll.h>
+#include <linux/slab.h>
+#include <linux/lp.h>
+#include <linux/mutex.h>
+#undef DEBUG
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/ratelimit.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
+#define DRIVER_DESC "USB Printer Device Class driver"
+
+#define USBLP_BUF_SIZE		8192
+#define USBLP_BUF_SIZE_IN	1024
+#define USBLP_DEVICE_ID_SIZE	1024
+
+/* ioctls: */
+#define IOCNR_GET_DEVICE_ID		1
+#define IOCNR_GET_PROTOCOLS		2
+#define IOCNR_SET_PROTOCOL		3
+#define IOCNR_HP_SET_CHANNEL		4
+#define IOCNR_GET_BUS_ADDRESS		5
+#define IOCNR_GET_VID_PID		6
+#define IOCNR_SOFT_RESET		7
+/* Get device_id string: */
+#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
+/* The following ioctls were added for http://hpoj.sourceforge.net:
+ * Get two-int array:
+ * [0]=current protocol
+ *     (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2,
+ *         3=USB_CLASS_PRINTER/1/3),
+ * [1]=supported protocol mask (mask&(1<<n)!=0 means
+ *     USB_CLASS_PRINTER/1/n supported):
+ */
+#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
+/*
+ * Set protocol
+ *     (arg: 1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2,
+ *         3=USB_CLASS_PRINTER/1/3):
+ */
+#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
+/* Set channel number (HP Vendor-specific command): */
+#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
+/* Get two-int array: [0]=bus number, [1]=device address: */
+#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
+/* Get two-int array: [0]=vendor ID, [1]=product ID: */
+#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
+/* Perform class specific soft reset */
+#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
+
+/*
+ * A DEVICE_ID string may include the printer's serial number.
+ * It should end with a semi-colon (';').
+ * An example from an HP 970C DeskJet printer is (this is one long string,
+ * with the serial number changed):
+MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet 970C;SERN:US970CSEPROF;VSTATUS:$HB0$NC0,ff,DN,IDLE,CUT,K1,C0,DP,NR,KP000,CP027;VP:0800,FL,B0;VJ:                    ;
+ */
+
+/*
+ * USB Printer Requests
+ */
+
+#define USBLP_REQ_GET_ID			0x00
+#define USBLP_REQ_GET_STATUS			0x01
+#define USBLP_REQ_RESET				0x02
+#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST	0x00	/* HP Vendor-specific */
+
+#define USBLP_MINORS		16
+#define USBLP_MINOR_BASE	0
+
+#define USBLP_CTL_TIMEOUT	5000			/* 5 seconds */
+
+#define USBLP_FIRST_PROTOCOL	1
+#define USBLP_LAST_PROTOCOL	3
+#define USBLP_MAX_PROTOCOLS	(USBLP_LAST_PROTOCOL+1)
+
+/*
+ * some arbitrary status buffer size;
+ * need a status buffer that is allocated via kmalloc(), not on stack
+ */
+#define STATUS_BUF_SIZE		8
+
+/*
+ * Locks down the locking order:
+ * ->wmut locks wstatus.
+ * ->mut locks the whole usblp, except [rw]complete, and thus, by indirection,
+ * [rw]status. We only touch status when we know the side idle.
+ * ->lock locks what interrupt accesses.
+ */
+struct usblp {
+	struct usb_device	*dev;			/* USB device */
+	struct mutex		wmut;
+	struct mutex		mut;
+	spinlock_t		lock;		/* locks rcomplete, wcomplete */
+	char			*readbuf;		/* read transfer_buffer */
+	char			*statusbuf;		/* status transfer_buffer */
+	struct usb_anchor	urbs;
+	wait_queue_head_t	rwait, wwait;
+	int			readcount;		/* Counter for reads */
+	int			ifnum;			/* Interface number */
+	struct usb_interface	*intf;			/* The interface */
+	/*
+	 * Alternate-setting numbers and endpoints for each protocol
+	 * (USB_CLASS_PRINTER/1/{index=1,2,3}) that the device supports:
+	 */
+	struct {
+		int				alt_setting;
+		struct usb_endpoint_descriptor	*epwrite;
+		struct usb_endpoint_descriptor	*epread;
+	}			protocol[USBLP_MAX_PROTOCOLS];
+	int			current_protocol;
+	int			minor;			/* minor number of device */
+	int			wcomplete, rcomplete;
+	int			wstatus;	/* bytes written or error */
+	int			rstatus;	/* bytes ready or error */
+	unsigned int		quirks;			/* quirks flags */
+	unsigned int		flags;			/* mode flags */
+	unsigned char		used;			/* True if open */
+	unsigned char		present;		/* True if not disconnected */
+	unsigned char		bidir;			/* interface is bidirectional */
+	unsigned char		no_paper;		/* Paper Out happened */
+	unsigned char		*device_id_string;	/* IEEE 1284 DEVICE ID string (ptr) */
+							/* first 2 bytes are (big-endian) length */
+};
+
+#ifdef DEBUG
+static void usblp_dump(struct usblp *usblp)
+{
+	struct device *dev = &usblp->intf->dev;
+	int p;
+
+	dev_dbg(dev, "usblp=0x%p\n", usblp);
+	dev_dbg(dev, "dev=0x%p\n", usblp->dev);
+	dev_dbg(dev, "present=%d\n", usblp->present);
+	dev_dbg(dev, "readbuf=0x%p\n", usblp->readbuf);
+	dev_dbg(dev, "readcount=%d\n", usblp->readcount);
+	dev_dbg(dev, "ifnum=%d\n", usblp->ifnum);
+	for (p = USBLP_FIRST_PROTOCOL; p <= USBLP_LAST_PROTOCOL; p++) {
+		dev_dbg(dev, "protocol[%d].alt_setting=%d\n", p,
+			usblp->protocol[p].alt_setting);
+		dev_dbg(dev, "protocol[%d].epwrite=%p\n", p,
+			usblp->protocol[p].epwrite);
+		dev_dbg(dev, "protocol[%d].epread=%p\n", p,
+			usblp->protocol[p].epread);
+	}
+	dev_dbg(dev, "current_protocol=%d\n", usblp->current_protocol);
+	dev_dbg(dev, "minor=%d\n", usblp->minor);
+	dev_dbg(dev, "wstatus=%d\n", usblp->wstatus);
+	dev_dbg(dev, "rstatus=%d\n", usblp->rstatus);
+	dev_dbg(dev, "quirks=%d\n", usblp->quirks);
+	dev_dbg(dev, "used=%d\n", usblp->used);
+	dev_dbg(dev, "bidir=%d\n", usblp->bidir);
+	dev_dbg(dev, "device_id_string=\"%s\"\n",
+		usblp->device_id_string ?
+			usblp->device_id_string + 2 :
+			(unsigned char *)"(null)");
+}
+#endif
+
+/* Quirks: various printer quirks are handled by this table & its flags. */
+
+struct quirk_printer_struct {
+	__u16 vendorId;
+	__u16 productId;
+	unsigned int quirks;
+};
+
+#define USBLP_QUIRK_BIDIR	0x1	/* reports bidir but requires unidirectional mode (no INs/reads) */
+#define USBLP_QUIRK_USB_INIT	0x2	/* needs vendor USB init string */
+#define USBLP_QUIRK_BAD_CLASS	0x4	/* descriptor uses vendor-specific Class or SubClass */
+
+static const struct quirk_printer_struct quirk_printers[] = {
+	{ 0x03f0, 0x0004, USBLP_QUIRK_BIDIR }, /* HP DeskJet 895C */
+	{ 0x03f0, 0x0104, USBLP_QUIRK_BIDIR }, /* HP DeskJet 880C */
+	{ 0x03f0, 0x0204, USBLP_QUIRK_BIDIR }, /* HP DeskJet 815C */
+	{ 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */
+	{ 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */
+	{ 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */
+	{ 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */
+	{ 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */
+	{ 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */
+	{ 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */
+	{ 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */
+	{ 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */
+	{ 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */
+	{ 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */
+	{ 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */
+	{ 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */
+	{ 0, 0 }
+};
+
+static int usblp_wwait(struct usblp *usblp, int nonblock);
+static int usblp_wtest(struct usblp *usblp, int nonblock);
+static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock);
+static int usblp_rtest(struct usblp *usblp, int nonblock);
+static int usblp_submit_read(struct usblp *usblp);
+static int usblp_select_alts(struct usblp *usblp);
+static int usblp_set_protocol(struct usblp *usblp, int protocol);
+static int usblp_cache_device_id_string(struct usblp *usblp);
+
+/* forward reference to make our lives easier */
+static struct usb_driver usblp_driver;
+static DEFINE_MUTEX(usblp_mutex);	/* locks the existence of usblp's */
+
+/*
+ * Functions for usblp control messages.
+ */
+
+static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, int recip, int value, void *buf, int len)
+{
+	int retval;
+	int index = usblp->ifnum;
+
+	/* High byte has the interface index.
+	   Low byte has the alternate setting.
+	 */
+	if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS))
+		index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting;
+
+	retval = usb_control_msg(usblp->dev,
+		dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0),
+		request, type | dir | recip, value, index, buf, len, USBLP_CTL_TIMEOUT);
+	dev_dbg(&usblp->intf->dev,
+		"usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d\n",
+		request, !!dir, recip, value, index, len, retval);
+	return retval < 0 ? retval : 0;
+}
+
+#define usblp_read_status(usblp, status)\
+	usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
+#define usblp_get_id(usblp, config, id, maxlen)\
+	usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
+#define usblp_reset(usblp)\
+	usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
+
+static int usblp_hp_channel_change_request(struct usblp *usblp, int channel, u8 *new_channel)
+{
+	u8 *buf;
+	int ret;
+
+	buf = kzalloc(1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST,
+			USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE,
+			channel, buf, 1);
+	if (ret == 0)
+		*new_channel = buf[0];
+
+	kfree(buf);
+
+	return ret;
+}
+
+/*
+ * See the description for usblp_select_alts() below for the usage
+ * explanation.  Look into your /sys/kernel/debug/usb/devices and dmesg in
+ * case of any trouble.
+ */
+static int proto_bias = -1;
+
+/*
+ * URB callback.
+ */
+
+static void usblp_bulk_read(struct urb *urb)
+{
+	struct usblp *usblp = urb->context;
+	int status = urb->status;
+	unsigned long flags;
+
+	if (usblp->present && usblp->used) {
+		if (status)
+			printk(KERN_WARNING "usblp%d: "
+			    "nonzero read bulk status received: %d\n",
+			    usblp->minor, status);
+	}
+	spin_lock_irqsave(&usblp->lock, flags);
+	if (status < 0)
+		usblp->rstatus = status;
+	else
+		usblp->rstatus = urb->actual_length;
+	usblp->rcomplete = 1;
+	wake_up(&usblp->rwait);
+	spin_unlock_irqrestore(&usblp->lock, flags);
+
+	usb_free_urb(urb);
+}
+
+static void usblp_bulk_write(struct urb *urb)
+{
+	struct usblp *usblp = urb->context;
+	int status = urb->status;
+	unsigned long flags;
+
+	if (usblp->present && usblp->used) {
+		if (status)
+			printk(KERN_WARNING "usblp%d: "
+			    "nonzero write bulk status received: %d\n",
+			    usblp->minor, status);
+	}
+	spin_lock_irqsave(&usblp->lock, flags);
+	if (status < 0)
+		usblp->wstatus = status;
+	else
+		usblp->wstatus = urb->actual_length;
+	usblp->no_paper = 0;
+	usblp->wcomplete = 1;
+	wake_up(&usblp->wwait);
+	spin_unlock_irqrestore(&usblp->lock, flags);
+
+	usb_free_urb(urb);
+}
+
+/*
+ * Get and print printer errors.
+ */
+
+static const char *usblp_messages[] = { "ok", "out of paper", "off-line", "on fire" };
+
+static int usblp_check_status(struct usblp *usblp, int err)
+{
+	unsigned char status, newerr = 0;
+	int error;
+
+	mutex_lock(&usblp->mut);
+	if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) {
+		mutex_unlock(&usblp->mut);
+		printk_ratelimited(KERN_ERR
+				"usblp%d: error %d reading printer status\n",
+				usblp->minor, error);
+		return 0;
+	}
+	status = *usblp->statusbuf;
+	mutex_unlock(&usblp->mut);
+
+	if (~status & LP_PERRORP)
+		newerr = 3;
+	if (status & LP_POUTPA)
+		newerr = 1;
+	if (~status & LP_PSELECD)
+		newerr = 2;
+
+	if (newerr != err) {
+		printk(KERN_INFO "usblp%d: %s\n",
+		   usblp->minor, usblp_messages[newerr]);
+	}
+
+	return newerr;
+}
+
+static int handle_bidir(struct usblp *usblp)
+{
+	if (usblp->bidir && usblp->used) {
+		if (usblp_submit_read(usblp) < 0)
+			return -EIO;
+	}
+	return 0;
+}
+
+/*
+ * File op functions.
+ */
+
+static int usblp_open(struct inode *inode, struct file *file)
+{
+	int minor = iminor(inode);
+	struct usblp *usblp;
+	struct usb_interface *intf;
+	int retval;
+
+	if (minor < 0)
+		return -ENODEV;
+
+	mutex_lock(&usblp_mutex);
+
+	retval = -ENODEV;
+	intf = usb_find_interface(&usblp_driver, minor);
+	if (!intf)
+		goto out;
+	usblp = usb_get_intfdata(intf);
+	if (!usblp || !usblp->dev || !usblp->present)
+		goto out;
+
+	retval = -EBUSY;
+	if (usblp->used)
+		goto out;
+
+	/*
+	 * We do not implement LP_ABORTOPEN/LPABORTOPEN for two reasons:
+	 *  - We do not want persistent state which close(2) does not clear
+	 *  - It is not used anyway, according to CUPS people
+	 */
+
+	retval = usb_autopm_get_interface(intf);
+	if (retval < 0)
+		goto out;
+	usblp->used = 1;
+	file->private_data = usblp;
+
+	usblp->wcomplete = 1; /* we begin writeable */
+	usblp->wstatus = 0;
+	usblp->rcomplete = 0;
+
+	if (handle_bidir(usblp) < 0) {
+		usb_autopm_put_interface(intf);
+		usblp->used = 0;
+		file->private_data = NULL;
+		retval = -EIO;
+	}
+out:
+	mutex_unlock(&usblp_mutex);
+	return retval;
+}
+
+static void usblp_cleanup(struct usblp *usblp)
+{
+	printk(KERN_INFO "usblp%d: removed\n", usblp->minor);
+
+	kfree(usblp->readbuf);
+	kfree(usblp->device_id_string);
+	kfree(usblp->statusbuf);
+	usb_put_intf(usblp->intf);
+	kfree(usblp);
+}
+
+static void usblp_unlink_urbs(struct usblp *usblp)
+{
+	usb_kill_anchored_urbs(&usblp->urbs);
+}
+
+static int usblp_release(struct inode *inode, struct file *file)
+{
+	struct usblp *usblp = file->private_data;
+
+	usblp->flags &= ~LP_ABORT;
+
+	mutex_lock(&usblp_mutex);
+	usblp->used = 0;
+	if (usblp->present)
+		usblp_unlink_urbs(usblp);
+
+	usb_autopm_put_interface(usblp->intf);
+
+	if (!usblp->present)		/* finish cleanup from disconnect */
+		usblp_cleanup(usblp);	/* any URBs must be dead */
+
+	mutex_unlock(&usblp_mutex);
+	return 0;
+}
+
+/* No kernel lock - fine */
+static __poll_t usblp_poll(struct file *file, struct poll_table_struct *wait)
+{
+	struct usblp *usblp = file->private_data;
+	__poll_t ret = 0;
+	unsigned long flags;
+
+	/* Should we check file->f_mode & FMODE_WRITE before poll_wait()? */
+	poll_wait(file, &usblp->rwait, wait);
+	poll_wait(file, &usblp->wwait, wait);
+
+	mutex_lock(&usblp->mut);
+	if (!usblp->present)
+		ret |= EPOLLHUP;
+	mutex_unlock(&usblp->mut);
+
+	spin_lock_irqsave(&usblp->lock, flags);
+	if (usblp->bidir && usblp->rcomplete)
+		ret |= EPOLLIN  | EPOLLRDNORM;
+	if (usblp->no_paper || usblp->wcomplete)
+		ret |= EPOLLOUT | EPOLLWRNORM;
+	spin_unlock_irqrestore(&usblp->lock, flags);
+	return ret;
+}
+
+static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct usblp *usblp = file->private_data;
+	int length, err, i;
+	unsigned char newChannel;
+	int status;
+	int twoints[2];
+	int retval = 0;
+
+	mutex_lock(&usblp->mut);
+	if (!usblp->present) {
+		retval = -ENODEV;
+		goto done;
+	}
+
+	dev_dbg(&usblp->intf->dev,
+		"usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)\n", cmd,
+		_IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd));
+
+	if (_IOC_TYPE(cmd) == 'P')	/* new-style ioctl number */
+
+		switch (_IOC_NR(cmd)) {
+
+		case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */
+			if (_IOC_DIR(cmd) != _IOC_READ) {
+				retval = -EINVAL;
+				goto done;
+			}
+
+			length = usblp_cache_device_id_string(usblp);
+			if (length < 0) {
+				retval = length;
+				goto done;
+			}
+			if (length > _IOC_SIZE(cmd))
+				length = _IOC_SIZE(cmd); /* truncate */
+
+			if (copy_to_user((void __user *) arg,
+					usblp->device_id_string,
+					(unsigned long) length)) {
+				retval = -EFAULT;
+				goto done;
+			}
+
+			break;
+
+		case IOCNR_GET_PROTOCOLS:
+			if (_IOC_DIR(cmd) != _IOC_READ ||
+			    _IOC_SIZE(cmd) < sizeof(twoints)) {
+				retval = -EINVAL;
+				goto done;
+			}
+
+			twoints[0] = usblp->current_protocol;
+			twoints[1] = 0;
+			for (i = USBLP_FIRST_PROTOCOL;
+			     i <= USBLP_LAST_PROTOCOL; i++) {
+				if (usblp->protocol[i].alt_setting >= 0)
+					twoints[1] |= (1<<i);
+			}
+
+			if (copy_to_user((void __user *)arg,
+					(unsigned char *)twoints,
+					sizeof(twoints))) {
+				retval = -EFAULT;
+				goto done;
+			}
+
+			break;
+
+		case IOCNR_SET_PROTOCOL:
+			if (_IOC_DIR(cmd) != _IOC_WRITE) {
+				retval = -EINVAL;
+				goto done;
+			}
+
+#ifdef DEBUG
+			if (arg == -10) {
+				usblp_dump(usblp);
+				break;
+			}
+#endif
+
+			usblp_unlink_urbs(usblp);
+			retval = usblp_set_protocol(usblp, arg);
+			if (retval < 0) {
+				usblp_set_protocol(usblp,
+					usblp->current_protocol);
+			}
+			break;
+
+		case IOCNR_HP_SET_CHANNEL:
+			if (_IOC_DIR(cmd) != _IOC_WRITE ||
+			    le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 ||
+			    usblp->quirks & USBLP_QUIRK_BIDIR) {
+				retval = -EINVAL;
+				goto done;
+			}
+
+			err = usblp_hp_channel_change_request(usblp,
+				arg, &newChannel);
+			if (err < 0) {
+				dev_err(&usblp->dev->dev,
+					"usblp%d: error = %d setting "
+					"HP channel\n",
+					usblp->minor, err);
+				retval = -EIO;
+				goto done;
+			}
+
+			dev_dbg(&usblp->intf->dev,
+				"usblp%d requested/got HP channel %ld/%d\n",
+				usblp->minor, arg, newChannel);
+			break;
+
+		case IOCNR_GET_BUS_ADDRESS:
+			if (_IOC_DIR(cmd) != _IOC_READ ||
+			    _IOC_SIZE(cmd) < sizeof(twoints)) {
+				retval = -EINVAL;
+				goto done;
+			}
+
+			twoints[0] = usblp->dev->bus->busnum;
+			twoints[1] = usblp->dev->devnum;
+			if (copy_to_user((void __user *)arg,
+					(unsigned char *)twoints,
+					sizeof(twoints))) {
+				retval = -EFAULT;
+				goto done;
+			}
+
+			dev_dbg(&usblp->intf->dev,
+				"usblp%d is bus=%d, device=%d\n",
+				usblp->minor, twoints[0], twoints[1]);
+			break;
+
+		case IOCNR_GET_VID_PID:
+			if (_IOC_DIR(cmd) != _IOC_READ ||
+			    _IOC_SIZE(cmd) < sizeof(twoints)) {
+				retval = -EINVAL;
+				goto done;
+			}
+
+			twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor);
+			twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct);
+			if (copy_to_user((void __user *)arg,
+					(unsigned char *)twoints,
+					sizeof(twoints))) {
+				retval = -EFAULT;
+				goto done;
+			}
+
+			dev_dbg(&usblp->intf->dev,
+				"usblp%d is VID=0x%4.4X, PID=0x%4.4X\n",
+				usblp->minor, twoints[0], twoints[1]);
+			break;
+
+		case IOCNR_SOFT_RESET:
+			if (_IOC_DIR(cmd) != _IOC_NONE) {
+				retval = -EINVAL;
+				goto done;
+			}
+			retval = usblp_reset(usblp);
+			break;
+		default:
+			retval = -ENOTTY;
+		}
+	else	/* old-style ioctl value */
+		switch (cmd) {
+
+		case LPGETSTATUS:
+			retval = usblp_read_status(usblp, usblp->statusbuf);
+			if (retval) {
+				printk_ratelimited(KERN_ERR "usblp%d:"
+					    "failed reading printer status (%d)\n",
+					    usblp->minor, retval);
+				retval = -EIO;
+				goto done;
+			}
+			status = *usblp->statusbuf;
+			if (copy_to_user((void __user *)arg, &status, sizeof(int)))
+				retval = -EFAULT;
+			break;
+
+		case LPABORT:
+			if (arg)
+				usblp->flags |= LP_ABORT;
+			else
+				usblp->flags &= ~LP_ABORT;
+			break;
+
+		default:
+			retval = -ENOTTY;
+		}
+
+done:
+	mutex_unlock(&usblp->mut);
+	return retval;
+}
+
+static struct urb *usblp_new_writeurb(struct usblp *usblp, int transfer_length)
+{
+	struct urb *urb;
+	char *writebuf;
+
+	writebuf = kmalloc(transfer_length, GFP_KERNEL);
+	if (writebuf == NULL)
+		return NULL;
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (urb == NULL) {
+		kfree(writebuf);
+		return NULL;
+	}
+
+	usb_fill_bulk_urb(urb, usblp->dev,
+		usb_sndbulkpipe(usblp->dev,
+		 usblp->protocol[usblp->current_protocol].epwrite->bEndpointAddress),
+		writebuf, transfer_length, usblp_bulk_write, usblp);
+	urb->transfer_flags |= URB_FREE_BUFFER;
+
+	return urb;
+}
+
+static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
+{
+	struct usblp *usblp = file->private_data;
+	struct urb *writeurb;
+	int rv;
+	int transfer_length;
+	ssize_t writecount = 0;
+
+	if (mutex_lock_interruptible(&usblp->wmut)) {
+		rv = -EINTR;
+		goto raise_biglock;
+	}
+	if ((rv = usblp_wwait(usblp, !!(file->f_flags & O_NONBLOCK))) < 0)
+		goto raise_wait;
+
+	while (writecount < count) {
+		/*
+		 * Step 1: Submit next block.
+		 */
+		if ((transfer_length = count - writecount) > USBLP_BUF_SIZE)
+			transfer_length = USBLP_BUF_SIZE;
+
+		rv = -ENOMEM;
+		writeurb = usblp_new_writeurb(usblp, transfer_length);
+		if (writeurb == NULL)
+			goto raise_urb;
+		usb_anchor_urb(writeurb, &usblp->urbs);
+
+		if (copy_from_user(writeurb->transfer_buffer,
+				   buffer + writecount, transfer_length)) {
+			rv = -EFAULT;
+			goto raise_badaddr;
+		}
+
+		spin_lock_irq(&usblp->lock);
+		usblp->wcomplete = 0;
+		spin_unlock_irq(&usblp->lock);
+		if ((rv = usb_submit_urb(writeurb, GFP_KERNEL)) < 0) {
+			usblp->wstatus = 0;
+			spin_lock_irq(&usblp->lock);
+			usblp->no_paper = 0;
+			usblp->wcomplete = 1;
+			wake_up(&usblp->wwait);
+			spin_unlock_irq(&usblp->lock);
+			if (rv != -ENOMEM)
+				rv = -EIO;
+			goto raise_submit;
+		}
+
+		/*
+		 * Step 2: Wait for transfer to end, collect results.
+		 */
+		rv = usblp_wwait(usblp, !!(file->f_flags&O_NONBLOCK));
+		if (rv < 0) {
+			if (rv == -EAGAIN) {
+				/* Presume that it's going to complete well. */
+				writecount += transfer_length;
+			}
+			if (rv == -ENOSPC) {
+				spin_lock_irq(&usblp->lock);
+				usblp->no_paper = 1;	/* Mark for poll(2) */
+				spin_unlock_irq(&usblp->lock);
+				writecount += transfer_length;
+			}
+			/* Leave URB dangling, to be cleaned on close. */
+			goto collect_error;
+		}
+
+		if (usblp->wstatus < 0) {
+			rv = -EIO;
+			goto collect_error;
+		}
+		/*
+		 * This is critical: it must be our URB, not other writer's.
+		 * The wmut exists mainly to cover us here.
+		 */
+		writecount += usblp->wstatus;
+	}
+
+	mutex_unlock(&usblp->wmut);
+	return writecount;
+
+raise_submit:
+raise_badaddr:
+	usb_unanchor_urb(writeurb);
+	usb_free_urb(writeurb);
+raise_urb:
+raise_wait:
+collect_error:		/* Out of raise sequence */
+	mutex_unlock(&usblp->wmut);
+raise_biglock:
+	return writecount ? writecount : rv;
+}
+
+/*
+ * Notice that we fail to restart in a few cases: on EFAULT, on restart
+ * error, etc. This is the historical behaviour. In all such cases we return
+ * EIO, and applications loop in order to get the new read going.
+ */
+static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, loff_t *ppos)
+{
+	struct usblp *usblp = file->private_data;
+	ssize_t count;
+	ssize_t avail;
+	int rv;
+
+	if (!usblp->bidir)
+		return -EINVAL;
+
+	rv = usblp_rwait_and_lock(usblp, !!(file->f_flags & O_NONBLOCK));
+	if (rv < 0)
+		return rv;
+
+	if (!usblp->present) {
+		count = -ENODEV;
+		goto done;
+	}
+
+	if ((avail = usblp->rstatus) < 0) {
+		printk(KERN_ERR "usblp%d: error %d reading from printer\n",
+		    usblp->minor, (int)avail);
+		usblp_submit_read(usblp);
+		count = -EIO;
+		goto done;
+	}
+
+	count = len < avail - usblp->readcount ? len : avail - usblp->readcount;
+	if (count != 0 &&
+	    copy_to_user(buffer, usblp->readbuf + usblp->readcount, count)) {
+		count = -EFAULT;
+		goto done;
+	}
+
+	if ((usblp->readcount += count) == avail) {
+		if (usblp_submit_read(usblp) < 0) {
+			/* We don't want to leak USB return codes into errno. */
+			if (count == 0)
+				count = -EIO;
+			goto done;
+		}
+	}
+
+done:
+	mutex_unlock(&usblp->mut);
+	return count;
+}
+
+/*
+ * Wait for the write path to come idle.
+ * This is called under the ->wmut, so the idle path stays idle.
+ *
+ * Our write path has a peculiar property: it does not buffer like a tty,
+ * but waits for the write to succeed. This allows our ->release to bug out
+ * without waiting for writes to drain. But it obviously does not work
+ * when O_NONBLOCK is set. So, applications setting O_NONBLOCK must use
+ * select(2) or poll(2) to wait for the buffer to drain before closing.
+ * Alternatively, set blocking mode with fcntl and issue a zero-size write.
+ */
+static int usblp_wwait(struct usblp *usblp, int nonblock)
+{
+	DECLARE_WAITQUEUE(waita, current);
+	int rc;
+	int err = 0;
+
+	add_wait_queue(&usblp->wwait, &waita);
+	for (;;) {
+		if (mutex_lock_interruptible(&usblp->mut)) {
+			rc = -EINTR;
+			break;
+		}
+		set_current_state(TASK_INTERRUPTIBLE);
+		rc = usblp_wtest(usblp, nonblock);
+		mutex_unlock(&usblp->mut);
+		if (rc <= 0)
+			break;
+
+		if (schedule_timeout(msecs_to_jiffies(1500)) == 0) {
+			if (usblp->flags & LP_ABORT) {
+				err = usblp_check_status(usblp, err);
+				if (err == 1) {	/* Paper out */
+					rc = -ENOSPC;
+					break;
+				}
+			} else {
+				/* Prod the printer, Gentoo#251237. */
+				mutex_lock(&usblp->mut);
+				usblp_read_status(usblp, usblp->statusbuf);
+				mutex_unlock(&usblp->mut);
+			}
+		}
+	}
+	set_current_state(TASK_RUNNING);
+	remove_wait_queue(&usblp->wwait, &waita);
+	return rc;
+}
+
+static int usblp_wtest(struct usblp *usblp, int nonblock)
+{
+	unsigned long flags;
+
+	if (!usblp->present)
+		return -ENODEV;
+	if (signal_pending(current))
+		return -EINTR;
+	spin_lock_irqsave(&usblp->lock, flags);
+	if (usblp->wcomplete) {
+		spin_unlock_irqrestore(&usblp->lock, flags);
+		return 0;
+	}
+	spin_unlock_irqrestore(&usblp->lock, flags);
+	if (nonblock)
+		return -EAGAIN;
+	return 1;
+}
+
+/*
+ * Wait for read bytes to become available. This probably should have been
+ * called usblp_r_lock_and_wait(), because we lock first. But it's a traditional
+ * name for functions which lock and return.
+ *
+ * We do not use wait_event_interruptible because it makes locking iffy.
+ */
+static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock)
+{
+	DECLARE_WAITQUEUE(waita, current);
+	int rc;
+
+	add_wait_queue(&usblp->rwait, &waita);
+	for (;;) {
+		if (mutex_lock_interruptible(&usblp->mut)) {
+			rc = -EINTR;
+			break;
+		}
+		set_current_state(TASK_INTERRUPTIBLE);
+		if ((rc = usblp_rtest(usblp, nonblock)) < 0) {
+			mutex_unlock(&usblp->mut);
+			break;
+		}
+		if (rc == 0)	/* Keep it locked */
+			break;
+		mutex_unlock(&usblp->mut);
+		schedule();
+	}
+	set_current_state(TASK_RUNNING);
+	remove_wait_queue(&usblp->rwait, &waita);
+	return rc;
+}
+
+static int usblp_rtest(struct usblp *usblp, int nonblock)
+{
+	unsigned long flags;
+
+	if (!usblp->present)
+		return -ENODEV;
+	if (signal_pending(current))
+		return -EINTR;
+	spin_lock_irqsave(&usblp->lock, flags);
+	if (usblp->rcomplete) {
+		spin_unlock_irqrestore(&usblp->lock, flags);
+		return 0;
+	}
+	spin_unlock_irqrestore(&usblp->lock, flags);
+	if (nonblock)
+		return -EAGAIN;
+	return 1;
+}
+
+/*
+ * Please check ->bidir and other such things outside for now.
+ */
+static int usblp_submit_read(struct usblp *usblp)
+{
+	struct urb *urb;
+	unsigned long flags;
+	int rc;
+
+	rc = -ENOMEM;
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (urb == NULL)
+		goto raise_urb;
+
+	usb_fill_bulk_urb(urb, usblp->dev,
+		usb_rcvbulkpipe(usblp->dev,
+		  usblp->protocol[usblp->current_protocol].epread->bEndpointAddress),
+		usblp->readbuf, USBLP_BUF_SIZE_IN,
+		usblp_bulk_read, usblp);
+	usb_anchor_urb(urb, &usblp->urbs);
+
+	spin_lock_irqsave(&usblp->lock, flags);
+	usblp->readcount = 0; /* XXX Why here? */
+	usblp->rcomplete = 0;
+	spin_unlock_irqrestore(&usblp->lock, flags);
+	if ((rc = usb_submit_urb(urb, GFP_KERNEL)) < 0) {
+		dev_dbg(&usblp->intf->dev, "error submitting urb (%d)\n", rc);
+		spin_lock_irqsave(&usblp->lock, flags);
+		usblp->rstatus = rc;
+		usblp->rcomplete = 1;
+		spin_unlock_irqrestore(&usblp->lock, flags);
+		goto raise_submit;
+	}
+
+	return 0;
+
+raise_submit:
+	usb_unanchor_urb(urb);
+	usb_free_urb(urb);
+raise_urb:
+	return rc;
+}
+
+/*
+ * Checks for printers that have quirks, such as requiring unidirectional
+ * communication but reporting bidirectional; currently some HP printers
+ * have this flaw (HP 810, 880, 895, etc.), or needing an init string
+ * sent at each open (like some Epsons).
+ * Returns 1 if found, 0 if not found.
+ *
+ * HP recommended that we use the bidirectional interface but
+ * don't attempt any bulk IN transfers from the IN endpoint.
+ * Here's some more detail on the problem:
+ * The problem is not that it isn't bidirectional though. The problem
+ * is that if you request a device ID, or status information, while
+ * the buffers are full, the return data will end up in the print data
+ * buffer. For example if you make sure you never request the device ID
+ * while you are sending print data, and you don't try to query the
+ * printer status every couple of milliseconds, you will probably be OK.
+ */
+static unsigned int usblp_quirks(__u16 vendor, __u16 product)
+{
+	int i;
+
+	for (i = 0; quirk_printers[i].vendorId; i++) {
+		if (vendor == quirk_printers[i].vendorId &&
+		    product == quirk_printers[i].productId)
+			return quirk_printers[i].quirks;
+	}
+	return 0;
+}
+
+static const struct file_operations usblp_fops = {
+	.owner =	THIS_MODULE,
+	.read =		usblp_read,
+	.write =	usblp_write,
+	.poll =		usblp_poll,
+	.unlocked_ioctl =	usblp_ioctl,
+	.compat_ioctl =		usblp_ioctl,
+	.open =		usblp_open,
+	.release =	usblp_release,
+	.llseek =	noop_llseek,
+};
+
+static char *usblp_devnode(struct device *dev, umode_t *mode)
+{
+	return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
+}
+
+static struct usb_class_driver usblp_class = {
+	.name =		"lp%d",
+	.devnode =	usblp_devnode,
+	.fops =		&usblp_fops,
+	.minor_base =	USBLP_MINOR_BASE,
+};
+
+static ssize_t ieee1284_id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usblp *usblp = usb_get_intfdata(intf);
+
+	if (usblp->device_id_string[0] == 0 &&
+	    usblp->device_id_string[1] == 0)
+		return 0;
+
+	return sprintf(buf, "%s", usblp->device_id_string+2);
+}
+
+static DEVICE_ATTR_RO(ieee1284_id);
+
+static struct attribute *usblp_attrs[] = {
+	&dev_attr_ieee1284_id.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(usblp);
+
+static int usblp_probe(struct usb_interface *intf,
+		       const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usblp *usblp;
+	int protocol;
+	int retval;
+
+	/* Malloc and start initializing usblp structure so we can use it
+	 * directly. */
+	usblp = kzalloc(sizeof(struct usblp), GFP_KERNEL);
+	if (!usblp) {
+		retval = -ENOMEM;
+		goto abort_ret;
+	}
+	usblp->dev = dev;
+	mutex_init(&usblp->wmut);
+	mutex_init(&usblp->mut);
+	spin_lock_init(&usblp->lock);
+	init_waitqueue_head(&usblp->rwait);
+	init_waitqueue_head(&usblp->wwait);
+	init_usb_anchor(&usblp->urbs);
+	usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+	usblp->intf = usb_get_intf(intf);
+
+	/* Malloc device ID string buffer to the largest expected length,
+	 * since we can re-query it on an ioctl and a dynamic string
+	 * could change in length. */
+	if (!(usblp->device_id_string = kmalloc(USBLP_DEVICE_ID_SIZE, GFP_KERNEL))) {
+		retval = -ENOMEM;
+		goto abort;
+	}
+
+	/*
+	 * Allocate read buffer. We somewhat wastefully
+	 * malloc both regardless of bidirectionality, because the
+	 * alternate setting can be changed later via an ioctl.
+	 */
+	if (!(usblp->readbuf = kmalloc(USBLP_BUF_SIZE_IN, GFP_KERNEL))) {
+		retval = -ENOMEM;
+		goto abort;
+	}
+
+	/* Allocate buffer for printer status */
+	usblp->statusbuf = kmalloc(STATUS_BUF_SIZE, GFP_KERNEL);
+	if (!usblp->statusbuf) {
+		retval = -ENOMEM;
+		goto abort;
+	}
+
+	/* Lookup quirks for this printer. */
+	usblp->quirks = usblp_quirks(
+		le16_to_cpu(dev->descriptor.idVendor),
+		le16_to_cpu(dev->descriptor.idProduct));
+
+	/* Analyze and pick initial alternate settings and endpoints. */
+	protocol = usblp_select_alts(usblp);
+	if (protocol < 0) {
+		dev_dbg(&intf->dev,
+			"incompatible printer-class device 0x%4.4X/0x%4.4X\n",
+			le16_to_cpu(dev->descriptor.idVendor),
+			le16_to_cpu(dev->descriptor.idProduct));
+		retval = -ENODEV;
+		goto abort;
+	}
+
+	/* Setup the selected alternate setting and endpoints. */
+	if (usblp_set_protocol(usblp, protocol) < 0) {
+		retval = -ENODEV;	/* ->probe isn't ->ioctl */
+		goto abort;
+	}
+
+	/* Retrieve and store the device ID string. */
+	usblp_cache_device_id_string(usblp);
+
+#ifdef DEBUG
+	usblp_check_status(usblp, 0);
+#endif
+
+	usb_set_intfdata(intf, usblp);
+
+	usblp->present = 1;
+
+	retval = usb_register_dev(intf, &usblp_class);
+	if (retval) {
+		dev_err(&intf->dev,
+			"usblp: Not able to get a minor (base %u, slice default): %d\n",
+			USBLP_MINOR_BASE, retval);
+		goto abort_intfdata;
+	}
+	usblp->minor = intf->minor;
+	dev_info(&intf->dev,
+		"usblp%d: USB %sdirectional printer dev %d if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X\n",
+		usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum,
+		usblp->ifnum,
+		usblp->protocol[usblp->current_protocol].alt_setting,
+		usblp->current_protocol,
+		le16_to_cpu(usblp->dev->descriptor.idVendor),
+		le16_to_cpu(usblp->dev->descriptor.idProduct));
+
+	return 0;
+
+abort_intfdata:
+	usb_set_intfdata(intf, NULL);
+abort:
+	kfree(usblp->readbuf);
+	kfree(usblp->statusbuf);
+	kfree(usblp->device_id_string);
+	usb_put_intf(usblp->intf);
+	kfree(usblp);
+abort_ret:
+	return retval;
+}
+
+/*
+ * We are a "new" style driver with usb_device_id table,
+ * but our requirements are too intricate for simple match to handle.
+ *
+ * The "proto_bias" option may be used to specify the preferred protocol
+ * for all USB printers (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2,
+ * 3=USB_CLASS_PRINTER/1/3).  If the device supports the preferred protocol,
+ * then we bind to it.
+ *
+ * The best interface for us is USB_CLASS_PRINTER/1/2, because it
+ * is compatible with a stream of characters. If we find it, we bind to it.
+ *
+ * Note that the people from hpoj.sourceforge.net need to be able to
+ * bind to USB_CLASS_PRINTER/1/3 (MLC/1284.4), so we provide them ioctls
+ * for this purpose.
+ *
+ * Failing USB_CLASS_PRINTER/1/2, we look for USB_CLASS_PRINTER/1/3,
+ * even though it's probably not stream-compatible, because this matches
+ * the behaviour of the old code.
+ *
+ * If nothing else, we bind to USB_CLASS_PRINTER/1/1
+ * - the unidirectional interface.
+ */
+static int usblp_select_alts(struct usblp *usblp)
+{
+	struct usb_interface *if_alt;
+	struct usb_host_interface *ifd;
+	struct usb_endpoint_descriptor *epwrite, *epread;
+	int p, i;
+	int res;
+
+	if_alt = usblp->intf;
+
+	for (p = 0; p < USBLP_MAX_PROTOCOLS; p++)
+		usblp->protocol[p].alt_setting = -1;
+
+	/* Find out what we have. */
+	for (i = 0; i < if_alt->num_altsetting; i++) {
+		ifd = &if_alt->altsetting[i];
+
+		if (ifd->desc.bInterfaceClass != USB_CLASS_PRINTER ||
+		    ifd->desc.bInterfaceSubClass != 1)
+			if (!(usblp->quirks & USBLP_QUIRK_BAD_CLASS))
+				continue;
+
+		if (ifd->desc.bInterfaceProtocol < USBLP_FIRST_PROTOCOL ||
+		    ifd->desc.bInterfaceProtocol > USBLP_LAST_PROTOCOL)
+			continue;
+
+		/* Look for the expected bulk endpoints. */
+		if (ifd->desc.bInterfaceProtocol > 1) {
+			res = usb_find_common_endpoints(ifd,
+					&epread, &epwrite, NULL, NULL);
+		} else {
+			epread = NULL;
+			res = usb_find_bulk_out_endpoint(ifd, &epwrite);
+		}
+
+		/* Ignore buggy hardware without the right endpoints. */
+		if (res)
+			continue;
+
+		/* Turn off reads for buggy bidirectional printers. */
+		if (usblp->quirks & USBLP_QUIRK_BIDIR) {
+			printk(KERN_INFO "usblp%d: Disabling reads from "
+			    "problematic bidirectional printer\n",
+			    usblp->minor);
+			epread = NULL;
+		}
+
+		usblp->protocol[ifd->desc.bInterfaceProtocol].alt_setting =
+				ifd->desc.bAlternateSetting;
+		usblp->protocol[ifd->desc.bInterfaceProtocol].epwrite = epwrite;
+		usblp->protocol[ifd->desc.bInterfaceProtocol].epread = epread;
+	}
+
+	/* If our requested protocol is supported, then use it. */
+	if (proto_bias >= USBLP_FIRST_PROTOCOL &&
+	    proto_bias <= USBLP_LAST_PROTOCOL &&
+	    usblp->protocol[proto_bias].alt_setting != -1)
+		return proto_bias;
+
+	/* Ordering is important here. */
+	if (usblp->protocol[2].alt_setting != -1)
+		return 2;
+	if (usblp->protocol[1].alt_setting != -1)
+		return 1;
+	if (usblp->protocol[3].alt_setting != -1)
+		return 3;
+
+	/* If nothing is available, then don't bind to this device. */
+	return -1;
+}
+
+static int usblp_set_protocol(struct usblp *usblp, int protocol)
+{
+	int r, alts;
+
+	if (protocol < USBLP_FIRST_PROTOCOL || protocol > USBLP_LAST_PROTOCOL)
+		return -EINVAL;
+
+	/* Don't unnecessarily set the interface if there's a single alt. */
+	if (usblp->intf->num_altsetting > 1) {
+		alts = usblp->protocol[protocol].alt_setting;
+		if (alts < 0)
+			return -EINVAL;
+		r = usb_set_interface(usblp->dev, usblp->ifnum, alts);
+		if (r < 0) {
+			printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n",
+				alts, usblp->ifnum);
+			return r;
+		}
+	}
+
+	usblp->bidir = (usblp->protocol[protocol].epread != NULL);
+	usblp->current_protocol = protocol;
+	dev_dbg(&usblp->intf->dev, "usblp%d set protocol %d\n",
+		usblp->minor, protocol);
+	return 0;
+}
+
+/* Retrieves and caches device ID string.
+ * Returns length, including length bytes but not null terminator.
+ * On error, returns a negative errno value. */
+static int usblp_cache_device_id_string(struct usblp *usblp)
+{
+	int err, length;
+
+	err = usblp_get_id(usblp, 0, usblp->device_id_string, USBLP_DEVICE_ID_SIZE - 1);
+	if (err < 0) {
+		dev_dbg(&usblp->intf->dev,
+			"usblp%d: error = %d reading IEEE-1284 Device ID string\n",
+			usblp->minor, err);
+		usblp->device_id_string[0] = usblp->device_id_string[1] = '\0';
+		return -EIO;
+	}
+
+	/* First two bytes are length in big-endian.
+	 * They count themselves, and we copy them into
+	 * the user's buffer. */
+	length = be16_to_cpu(*((__be16 *)usblp->device_id_string));
+	if (length < 2)
+		length = 2;
+	else if (length >= USBLP_DEVICE_ID_SIZE)
+		length = USBLP_DEVICE_ID_SIZE - 1;
+	usblp->device_id_string[length] = '\0';
+
+	dev_dbg(&usblp->intf->dev, "usblp%d Device ID string [len=%d]=\"%s\"\n",
+		usblp->minor, length, &usblp->device_id_string[2]);
+
+	return length;
+}
+
+static void usblp_disconnect(struct usb_interface *intf)
+{
+	struct usblp *usblp = usb_get_intfdata(intf);
+
+	usb_deregister_dev(intf, &usblp_class);
+
+	if (!usblp || !usblp->dev) {
+		dev_err(&intf->dev, "bogus disconnect\n");
+		BUG();
+	}
+
+	mutex_lock(&usblp_mutex);
+	mutex_lock(&usblp->mut);
+	usblp->present = 0;
+	wake_up(&usblp->wwait);
+	wake_up(&usblp->rwait);
+	usb_set_intfdata(intf, NULL);
+
+	usblp_unlink_urbs(usblp);
+	mutex_unlock(&usblp->mut);
+	usb_poison_anchored_urbs(&usblp->urbs);
+
+	if (!usblp->used)
+		usblp_cleanup(usblp);
+
+	mutex_unlock(&usblp_mutex);
+}
+
+static int usblp_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usblp *usblp = usb_get_intfdata(intf);
+
+	usblp_unlink_urbs(usblp);
+#if 0 /* XXX Do we want this? What if someone is reading, should we fail? */
+	/* not strictly necessary, but just in case */
+	wake_up(&usblp->wwait);
+	wake_up(&usblp->rwait);
+#endif
+
+	return 0;
+}
+
+static int usblp_resume(struct usb_interface *intf)
+{
+	struct usblp *usblp = usb_get_intfdata(intf);
+	int r;
+
+	r = handle_bidir(usblp);
+
+	return r;
+}
+
+static const struct usb_device_id usblp_ids[] = {
+	{ USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 1) },
+	{ USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 2) },
+	{ USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 3) },
+	{ USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 1) },
+	{ USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 2) },
+	{ USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 3) },
+	{ USB_DEVICE(0x04b8, 0x0202) },	/* Seiko Epson Receipt Printer M129C */
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, usblp_ids);
+
+static struct usb_driver usblp_driver = {
+	.name =		"usblp",
+	.probe =	usblp_probe,
+	.disconnect =	usblp_disconnect,
+	.suspend =	usblp_suspend,
+	.resume =	usblp_resume,
+	.id_table =	usblp_ids,
+	.dev_groups =	usblp_groups,
+	.supports_autosuspend =	1,
+};
+
+module_usb_driver(usblp_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+module_param(proto_bias, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(proto_bias, "Favourite protocol number");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
new file mode 100644
index 000000000..311007b1d
--- /dev/null
+++ b/drivers/usb/class/usbtmc.c
@@ -0,0 +1,2595 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * drivers/usb/class/usbtmc.c - USB Test & Measurement class driver
+ *
+ * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany
+ * Copyright (C) 2008 Novell, Inc.
+ * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
+ * Copyright (C) 2018 IVI Foundation, Inc.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/kref.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/mutex.h>
+#include <linux/usb.h>
+#include <linux/compat.h>
+#include <linux/usb/tmc.h>
+
+/* Increment API VERSION when changing tmc.h with new flags or ioctls
+ * or when changing a significant behavior of the driver.
+ */
+#define USBTMC_API_VERSION (3)
+
+#define USBTMC_HEADER_SIZE	12
+#define USBTMC_MINOR_BASE	176
+
+/* Minimum USB timeout (in milliseconds) */
+#define USBTMC_MIN_TIMEOUT	100
+/* Default USB timeout (in milliseconds) */
+#define USBTMC_TIMEOUT		5000
+
+/* Max number of urbs used in write transfers */
+#define MAX_URBS_IN_FLIGHT	16
+/* I/O buffer size used in generic read/write functions */
+#define USBTMC_BUFSIZE		(4096)
+
+/*
+ * Maximum number of read cycles to empty bulk in endpoint during CLEAR and
+ * ABORT_BULK_IN requests. Ends the loop if (for whatever reason) a short
+ * packet is never read.
+ */
+#define USBTMC_MAX_READS_TO_CLEAR_BULK_IN	100
+
+static const struct usb_device_id usbtmc_devices[] = {
+	{ USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), },
+	{ USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 1), },
+	{ 0, } /* terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, usbtmc_devices);
+
+/*
+ * This structure is the capabilities for the device
+ * See section 4.2.1.8 of the USBTMC specification,
+ * and section 4.2.2 of the USBTMC usb488 subclass
+ * specification for details.
+ */
+struct usbtmc_dev_capabilities {
+	__u8 interface_capabilities;
+	__u8 device_capabilities;
+	__u8 usb488_interface_capabilities;
+	__u8 usb488_device_capabilities;
+};
+
+/* This structure holds private data for each USBTMC device. One copy is
+ * allocated for each USBTMC device in the driver's probe function.
+ */
+struct usbtmc_device_data {
+	const struct usb_device_id *id;
+	struct usb_device *usb_dev;
+	struct usb_interface *intf;
+	struct list_head file_list;
+
+	unsigned int bulk_in;
+	unsigned int bulk_out;
+
+	u8 bTag;
+	u8 bTag_last_write;	/* needed for abort */
+	u8 bTag_last_read;	/* needed for abort */
+
+	/* packet size of IN bulk */
+	u16            wMaxPacketSize;
+
+	/* data for interrupt in endpoint handling */
+	u8             bNotify1;
+	u8             bNotify2;
+	u16            ifnum;
+	u8             iin_bTag;
+	u8            *iin_buffer;
+	atomic_t       iin_data_valid;
+	unsigned int   iin_ep;
+	int            iin_ep_present;
+	int            iin_interval;
+	struct urb    *iin_urb;
+	u16            iin_wMaxPacketSize;
+
+	/* coalesced usb488_caps from usbtmc_dev_capabilities */
+	__u8 usb488_caps;
+
+	bool zombie; /* fd of disconnected device */
+
+	struct usbtmc_dev_capabilities	capabilities;
+	struct kref kref;
+	struct mutex io_mutex;	/* only one i/o function running at a time */
+	wait_queue_head_t waitq;
+	struct fasync_struct *fasync;
+	spinlock_t dev_lock; /* lock for file_list */
+};
+#define to_usbtmc_data(d) container_of(d, struct usbtmc_device_data, kref)
+
+/*
+ * This structure holds private data for each USBTMC file handle.
+ */
+struct usbtmc_file_data {
+	struct usbtmc_device_data *data;
+	struct list_head file_elem;
+
+	u32            timeout;
+	u8             srq_byte;
+	atomic_t       srq_asserted;
+	atomic_t       closing;
+	u8             bmTransferAttributes; /* member of DEV_DEP_MSG_IN */
+
+	u8             eom_val;
+	u8             term_char;
+	bool           term_char_enabled;
+	bool           auto_abort;
+
+	spinlock_t     err_lock; /* lock for errors */
+
+	struct usb_anchor submitted;
+
+	/* data for generic_write */
+	struct semaphore limit_write_sem;
+	u32 out_transfer_size;
+	int out_status;
+
+	/* data for generic_read */
+	u32 in_transfer_size;
+	int in_status;
+	int in_urbs_used;
+	struct usb_anchor in_anchor;
+	wait_queue_head_t wait_bulk_in;
+};
+
+/* Forward declarations */
+static struct usb_driver usbtmc_driver;
+static void usbtmc_draw_down(struct usbtmc_file_data *file_data);
+
+static void usbtmc_delete(struct kref *kref)
+{
+	struct usbtmc_device_data *data = to_usbtmc_data(kref);
+
+	usb_put_dev(data->usb_dev);
+	kfree(data);
+}
+
+static int usbtmc_open(struct inode *inode, struct file *filp)
+{
+	struct usb_interface *intf;
+	struct usbtmc_device_data *data;
+	struct usbtmc_file_data *file_data;
+
+	intf = usb_find_interface(&usbtmc_driver, iminor(inode));
+	if (!intf) {
+		pr_err("can not find device for minor %d", iminor(inode));
+		return -ENODEV;
+	}
+
+	file_data = kzalloc(sizeof(*file_data), GFP_KERNEL);
+	if (!file_data)
+		return -ENOMEM;
+
+	spin_lock_init(&file_data->err_lock);
+	sema_init(&file_data->limit_write_sem, MAX_URBS_IN_FLIGHT);
+	init_usb_anchor(&file_data->submitted);
+	init_usb_anchor(&file_data->in_anchor);
+	init_waitqueue_head(&file_data->wait_bulk_in);
+
+	data = usb_get_intfdata(intf);
+	/* Protect reference to data from file structure until release */
+	kref_get(&data->kref);
+
+	mutex_lock(&data->io_mutex);
+	file_data->data = data;
+
+	atomic_set(&file_data->closing, 0);
+
+	file_data->timeout = USBTMC_TIMEOUT;
+	file_data->term_char = '\n';
+	file_data->term_char_enabled = 0;
+	file_data->auto_abort = 0;
+	file_data->eom_val = 1;
+
+	INIT_LIST_HEAD(&file_data->file_elem);
+	spin_lock_irq(&data->dev_lock);
+	list_add_tail(&file_data->file_elem, &data->file_list);
+	spin_unlock_irq(&data->dev_lock);
+	mutex_unlock(&data->io_mutex);
+
+	/* Store pointer in file structure's private data field */
+	filp->private_data = file_data;
+
+	return 0;
+}
+
+/*
+ * usbtmc_flush - called before file handle is closed
+ */
+static int usbtmc_flush(struct file *file, fl_owner_t id)
+{
+	struct usbtmc_file_data *file_data;
+	struct usbtmc_device_data *data;
+
+	file_data = file->private_data;
+	if (file_data == NULL)
+		return -ENODEV;
+
+	atomic_set(&file_data->closing, 1);
+	data = file_data->data;
+
+	/* wait for io to stop */
+	mutex_lock(&data->io_mutex);
+
+	usbtmc_draw_down(file_data);
+
+	spin_lock_irq(&file_data->err_lock);
+	file_data->in_status = 0;
+	file_data->in_transfer_size = 0;
+	file_data->in_urbs_used = 0;
+	file_data->out_status = 0;
+	file_data->out_transfer_size = 0;
+	spin_unlock_irq(&file_data->err_lock);
+
+	wake_up_interruptible_all(&data->waitq);
+	mutex_unlock(&data->io_mutex);
+
+	return 0;
+}
+
+static int usbtmc_release(struct inode *inode, struct file *file)
+{
+	struct usbtmc_file_data *file_data = file->private_data;
+
+	/* prevent IO _AND_ usbtmc_interrupt */
+	mutex_lock(&file_data->data->io_mutex);
+	spin_lock_irq(&file_data->data->dev_lock);
+
+	list_del(&file_data->file_elem);
+
+	spin_unlock_irq(&file_data->data->dev_lock);
+	mutex_unlock(&file_data->data->io_mutex);
+
+	kref_put(&file_data->data->kref, usbtmc_delete);
+	file_data->data = NULL;
+	kfree(file_data);
+	return 0;
+}
+
+static int usbtmc_ioctl_abort_bulk_in_tag(struct usbtmc_device_data *data,
+					  u8 tag)
+{
+	u8 *buffer;
+	struct device *dev;
+	int rv;
+	int n;
+	int actual;
+
+	dev = &data->intf->dev;
+	buffer = kmalloc(USBTMC_BUFSIZE, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	rv = usb_control_msg(data->usb_dev,
+			     usb_rcvctrlpipe(data->usb_dev, 0),
+			     USBTMC_REQUEST_INITIATE_ABORT_BULK_IN,
+			     USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
+			     tag, data->bulk_in,
+			     buffer, 2, USB_CTRL_GET_TIMEOUT);
+
+	if (rv < 0) {
+		dev_err(dev, "usb_control_msg returned %d\n", rv);
+		goto exit;
+	}
+
+	dev_dbg(dev, "INITIATE_ABORT_BULK_IN returned %x with tag %02x\n",
+		buffer[0], buffer[1]);
+
+	if (buffer[0] == USBTMC_STATUS_FAILED) {
+		/* No transfer in progress and the Bulk-OUT FIFO is empty. */
+		rv = 0;
+		goto exit;
+	}
+
+	if (buffer[0] == USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS) {
+		/* The device returns this status if either:
+		 * - There is a transfer in progress, but the specified bTag
+		 *   does not match.
+		 * - There is no transfer in progress, but the Bulk-OUT FIFO
+		 *   is not empty.
+		 */
+		rv = -ENOMSG;
+		goto exit;
+	}
+
+	if (buffer[0] != USBTMC_STATUS_SUCCESS) {
+		dev_err(dev, "INITIATE_ABORT_BULK_IN returned %x\n",
+			buffer[0]);
+		rv = -EPERM;
+		goto exit;
+	}
+
+	n = 0;
+
+usbtmc_abort_bulk_in_status:
+	dev_dbg(dev, "Reading from bulk in EP\n");
+
+	/* Data must be present. So use low timeout 300 ms */
+	actual = 0;
+	rv = usb_bulk_msg(data->usb_dev,
+			  usb_rcvbulkpipe(data->usb_dev,
+					  data->bulk_in),
+			  buffer, USBTMC_BUFSIZE,
+			  &actual, 300);
+
+	print_hex_dump_debug("usbtmc ", DUMP_PREFIX_NONE, 16, 1,
+			     buffer, actual, true);
+
+	n++;
+
+	if (rv < 0) {
+		dev_err(dev, "usb_bulk_msg returned %d\n", rv);
+		if (rv != -ETIMEDOUT)
+			goto exit;
+	}
+
+	if (actual == USBTMC_BUFSIZE)
+		goto usbtmc_abort_bulk_in_status;
+
+	if (n >= USBTMC_MAX_READS_TO_CLEAR_BULK_IN) {
+		dev_err(dev, "Couldn't clear device buffer within %d cycles\n",
+			USBTMC_MAX_READS_TO_CLEAR_BULK_IN);
+		rv = -EPERM;
+		goto exit;
+	}
+
+	rv = usb_control_msg(data->usb_dev,
+			     usb_rcvctrlpipe(data->usb_dev, 0),
+			     USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS,
+			     USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
+			     0, data->bulk_in, buffer, 0x08,
+			     USB_CTRL_GET_TIMEOUT);
+
+	if (rv < 0) {
+		dev_err(dev, "usb_control_msg returned %d\n", rv);
+		goto exit;
+	}
+
+	dev_dbg(dev, "CHECK_ABORT_BULK_IN returned %x\n", buffer[0]);
+
+	if (buffer[0] == USBTMC_STATUS_SUCCESS) {
+		rv = 0;
+		goto exit;
+	}
+
+	if (buffer[0] != USBTMC_STATUS_PENDING) {
+		dev_err(dev, "CHECK_ABORT_BULK_IN returned %x\n", buffer[0]);
+		rv = -EPERM;
+		goto exit;
+	}
+
+	if ((buffer[1] & 1) > 0) {
+		/* The device has 1 or more queued packets the Host can read */
+		goto usbtmc_abort_bulk_in_status;
+	}
+
+	/* The Host must send CHECK_ABORT_BULK_IN_STATUS at a later time. */
+	rv = -EAGAIN;
+exit:
+	kfree(buffer);
+	return rv;
+}
+
+static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data)
+{
+	return usbtmc_ioctl_abort_bulk_in_tag(data, data->bTag_last_read);
+}
+
+static int usbtmc_ioctl_abort_bulk_out_tag(struct usbtmc_device_data *data,
+					   u8 tag)
+{
+	struct device *dev;
+	u8 *buffer;
+	int rv;
+	int n;
+
+	dev = &data->intf->dev;
+
+	buffer = kmalloc(8, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	rv = usb_control_msg(data->usb_dev,
+			     usb_rcvctrlpipe(data->usb_dev, 0),
+			     USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT,
+			     USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
+			     tag, data->bulk_out,
+			     buffer, 2, USB_CTRL_GET_TIMEOUT);
+
+	if (rv < 0) {
+		dev_err(dev, "usb_control_msg returned %d\n", rv);
+		goto exit;
+	}
+
+	dev_dbg(dev, "INITIATE_ABORT_BULK_OUT returned %x\n", buffer[0]);
+
+	if (buffer[0] != USBTMC_STATUS_SUCCESS) {
+		dev_err(dev, "INITIATE_ABORT_BULK_OUT returned %x\n",
+			buffer[0]);
+		rv = -EPERM;
+		goto exit;
+	}
+
+	n = 0;
+
+usbtmc_abort_bulk_out_check_status:
+	/* do not stress device with subsequent requests */
+	msleep(50);
+	rv = usb_control_msg(data->usb_dev,
+			     usb_rcvctrlpipe(data->usb_dev, 0),
+			     USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS,
+			     USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
+			     0, data->bulk_out, buffer, 0x08,
+			     USB_CTRL_GET_TIMEOUT);
+	n++;
+	if (rv < 0) {
+		dev_err(dev, "usb_control_msg returned %d\n", rv);
+		goto exit;
+	}
+
+	dev_dbg(dev, "CHECK_ABORT_BULK_OUT returned %x\n", buffer[0]);
+
+	if (buffer[0] == USBTMC_STATUS_SUCCESS)
+		goto usbtmc_abort_bulk_out_clear_halt;
+
+	if ((buffer[0] == USBTMC_STATUS_PENDING) &&
+	    (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN))
+		goto usbtmc_abort_bulk_out_check_status;
+
+	rv = -EPERM;
+	goto exit;
+
+usbtmc_abort_bulk_out_clear_halt:
+	rv = usb_clear_halt(data->usb_dev,
+			    usb_sndbulkpipe(data->usb_dev, data->bulk_out));
+
+	if (rv < 0) {
+		dev_err(dev, "usb_control_msg returned %d\n", rv);
+		goto exit;
+	}
+	rv = 0;
+
+exit:
+	kfree(buffer);
+	return rv;
+}
+
+static int usbtmc_ioctl_abort_bulk_out(struct usbtmc_device_data *data)
+{
+	return usbtmc_ioctl_abort_bulk_out_tag(data, data->bTag_last_write);
+}
+
+static int usbtmc_get_stb(struct usbtmc_file_data *file_data, __u8 *stb)
+{
+	struct usbtmc_device_data *data = file_data->data;
+	struct device *dev = &data->intf->dev;
+	u8 *buffer;
+	u8 tag;
+	int rv;
+
+	dev_dbg(dev, "Enter ioctl_read_stb iin_ep_present: %d\n",
+		data->iin_ep_present);
+
+	buffer = kmalloc(8, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	atomic_set(&data->iin_data_valid, 0);
+
+	rv = usb_control_msg(data->usb_dev,
+			usb_rcvctrlpipe(data->usb_dev, 0),
+			USBTMC488_REQUEST_READ_STATUS_BYTE,
+			USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			data->iin_bTag,
+			data->ifnum,
+			buffer, 0x03, USB_CTRL_GET_TIMEOUT);
+	if (rv < 0) {
+		dev_err(dev, "stb usb_control_msg returned %d\n", rv);
+		goto exit;
+	}
+
+	if (buffer[0] != USBTMC_STATUS_SUCCESS) {
+		dev_err(dev, "control status returned %x\n", buffer[0]);
+		rv = -EIO;
+		goto exit;
+	}
+
+	if (data->iin_ep_present) {
+		rv = wait_event_interruptible_timeout(
+			data->waitq,
+			atomic_read(&data->iin_data_valid) != 0,
+			file_data->timeout);
+		if (rv < 0) {
+			dev_dbg(dev, "wait interrupted %d\n", rv);
+			goto exit;
+		}
+
+		if (rv == 0) {
+			dev_dbg(dev, "wait timed out\n");
+			rv = -ETIMEDOUT;
+			goto exit;
+		}
+
+		tag = data->bNotify1 & 0x7f;
+		if (tag != data->iin_bTag) {
+			dev_err(dev, "expected bTag %x got %x\n",
+				data->iin_bTag, tag);
+		}
+
+		*stb = data->bNotify2;
+	} else {
+		*stb = buffer[2];
+	}
+
+	dev_dbg(dev, "stb:0x%02x received %d\n", (unsigned int)*stb, rv);
+
+ exit:
+	/* bump interrupt bTag */
+	data->iin_bTag += 1;
+	if (data->iin_bTag > 127)
+		/* 1 is for SRQ see USBTMC-USB488 subclass spec section 4.3.1 */
+		data->iin_bTag = 2;
+
+	kfree(buffer);
+	return rv;
+}
+
+static int usbtmc488_ioctl_read_stb(struct usbtmc_file_data *file_data,
+				void __user *arg)
+{
+	int srq_asserted = 0;
+	__u8 stb;
+	int rv;
+
+	rv = usbtmc_get_stb(file_data, &stb);
+
+	if (rv > 0) {
+		srq_asserted = atomic_xchg(&file_data->srq_asserted,
+					srq_asserted);
+		if (srq_asserted)
+			stb |= 0x40; /* Set RQS bit */
+
+		rv = put_user(stb, (__u8 __user *)arg);
+	}
+	return rv;
+
+}
+
+static int usbtmc_ioctl_get_srq_stb(struct usbtmc_file_data *file_data,
+				void __user *arg)
+{
+	struct usbtmc_device_data *data = file_data->data;
+	struct device *dev = &data->intf->dev;
+	int srq_asserted = 0;
+	__u8 stb = 0;
+	int rv;
+
+	spin_lock_irq(&data->dev_lock);
+	srq_asserted  = atomic_xchg(&file_data->srq_asserted, srq_asserted);
+
+	if (srq_asserted) {
+		stb = file_data->srq_byte;
+		spin_unlock_irq(&data->dev_lock);
+		rv = put_user(stb, (__u8 __user *)arg);
+	} else {
+		spin_unlock_irq(&data->dev_lock);
+		rv = -ENOMSG;
+	}
+
+	dev_dbg(dev, "stb:0x%02x with srq received %d\n", (unsigned int)stb, rv);
+
+	return rv;
+}
+
+static int usbtmc488_ioctl_wait_srq(struct usbtmc_file_data *file_data,
+				    __u32 __user *arg)
+{
+	struct usbtmc_device_data *data = file_data->data;
+	struct device *dev = &data->intf->dev;
+	int rv;
+	u32 timeout;
+	unsigned long expire;
+
+	if (!data->iin_ep_present) {
+		dev_dbg(dev, "no interrupt endpoint present\n");
+		return -EFAULT;
+	}
+
+	if (get_user(timeout, arg))
+		return -EFAULT;
+
+	expire = msecs_to_jiffies(timeout);
+
+	mutex_unlock(&data->io_mutex);
+
+	rv = wait_event_interruptible_timeout(
+			data->waitq,
+			atomic_read(&file_data->srq_asserted) != 0 ||
+			atomic_read(&file_data->closing),
+			expire);
+
+	mutex_lock(&data->io_mutex);
+
+	/* Note! disconnect or close could be called in the meantime */
+	if (atomic_read(&file_data->closing) || data->zombie)
+		rv = -ENODEV;
+
+	if (rv < 0) {
+		/* dev can be invalid now! */
+		pr_debug("%s - wait interrupted %d\n", __func__, rv);
+		return rv;
+	}
+
+	if (rv == 0) {
+		dev_dbg(dev, "%s - wait timed out\n", __func__);
+		return -ETIMEDOUT;
+	}
+
+	dev_dbg(dev, "%s - srq asserted\n", __func__);
+	return 0;
+}
+
+static int usbtmc488_ioctl_simple(struct usbtmc_device_data *data,
+				void __user *arg, unsigned int cmd)
+{
+	struct device *dev = &data->intf->dev;
+	__u8 val;
+	u8 *buffer;
+	u16 wValue;
+	int rv;
+
+	if (!(data->usb488_caps & USBTMC488_CAPABILITY_SIMPLE))
+		return -EINVAL;
+
+	buffer = kmalloc(8, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	if (cmd == USBTMC488_REQUEST_REN_CONTROL) {
+		rv = copy_from_user(&val, arg, sizeof(val));
+		if (rv) {
+			rv = -EFAULT;
+			goto exit;
+		}
+		wValue = val ? 1 : 0;
+	} else {
+		wValue = 0;
+	}
+
+	rv = usb_control_msg(data->usb_dev,
+			usb_rcvctrlpipe(data->usb_dev, 0),
+			cmd,
+			USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			wValue,
+			data->ifnum,
+			buffer, 0x01, USB_CTRL_GET_TIMEOUT);
+	if (rv < 0) {
+		dev_err(dev, "simple usb_control_msg failed %d\n", rv);
+		goto exit;
+	} else if (rv != 1) {
+		dev_warn(dev, "simple usb_control_msg returned %d\n", rv);
+		rv = -EIO;
+		goto exit;
+	}
+
+	if (buffer[0] != USBTMC_STATUS_SUCCESS) {
+		dev_err(dev, "simple control status returned %x\n", buffer[0]);
+		rv = -EIO;
+		goto exit;
+	}
+	rv = 0;
+
+ exit:
+	kfree(buffer);
+	return rv;
+}
+
+/*
+ * Sends a TRIGGER Bulk-OUT command message
+ * See the USBTMC-USB488 specification, Table 2.
+ *
+ * Also updates bTag_last_write.
+ */
+static int usbtmc488_ioctl_trigger(struct usbtmc_file_data *file_data)
+{
+	struct usbtmc_device_data *data = file_data->data;
+	int retval;
+	u8 *buffer;
+	int actual;
+
+	buffer = kzalloc(USBTMC_HEADER_SIZE, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	buffer[0] = 128;
+	buffer[1] = data->bTag;
+	buffer[2] = ~data->bTag;
+
+	retval = usb_bulk_msg(data->usb_dev,
+			      usb_sndbulkpipe(data->usb_dev,
+					      data->bulk_out),
+			      buffer, USBTMC_HEADER_SIZE,
+			      &actual, file_data->timeout);
+
+	/* Store bTag (in case we need to abort) */
+	data->bTag_last_write = data->bTag;
+
+	/* Increment bTag -- and increment again if zero */
+	data->bTag++;
+	if (!data->bTag)
+		data->bTag++;
+
+	kfree(buffer);
+	if (retval < 0) {
+		dev_err(&data->intf->dev, "%s returned %d\n",
+			__func__, retval);
+		return retval;
+	}
+
+	return 0;
+}
+
+static struct urb *usbtmc_create_urb(void)
+{
+	const size_t bufsize = USBTMC_BUFSIZE;
+	u8 *dmabuf = NULL;
+	struct urb *urb = usb_alloc_urb(0, GFP_KERNEL);
+
+	if (!urb)
+		return NULL;
+
+	dmabuf = kmalloc(bufsize, GFP_KERNEL);
+	if (!dmabuf) {
+		usb_free_urb(urb);
+		return NULL;
+	}
+
+	urb->transfer_buffer = dmabuf;
+	urb->transfer_buffer_length = bufsize;
+	urb->transfer_flags |= URB_FREE_BUFFER;
+	return urb;
+}
+
+static void usbtmc_read_bulk_cb(struct urb *urb)
+{
+	struct usbtmc_file_data *file_data = urb->context;
+	int status = urb->status;
+	unsigned long flags;
+
+	/* sync/async unlink faults aren't errors */
+	if (status) {
+		if (!(/* status == -ENOENT || */
+			status == -ECONNRESET ||
+			status == -EREMOTEIO || /* Short packet */
+			status == -ESHUTDOWN))
+			dev_err(&file_data->data->intf->dev,
+			"%s - nonzero read bulk status received: %d\n",
+			__func__, status);
+
+		spin_lock_irqsave(&file_data->err_lock, flags);
+		if (!file_data->in_status)
+			file_data->in_status = status;
+		spin_unlock_irqrestore(&file_data->err_lock, flags);
+	}
+
+	spin_lock_irqsave(&file_data->err_lock, flags);
+	file_data->in_transfer_size += urb->actual_length;
+	dev_dbg(&file_data->data->intf->dev,
+		"%s - total size: %u current: %d status: %d\n",
+		__func__, file_data->in_transfer_size,
+		urb->actual_length, status);
+	spin_unlock_irqrestore(&file_data->err_lock, flags);
+	usb_anchor_urb(urb, &file_data->in_anchor);
+
+	wake_up_interruptible(&file_data->wait_bulk_in);
+	wake_up_interruptible(&file_data->data->waitq);
+}
+
+static inline bool usbtmc_do_transfer(struct usbtmc_file_data *file_data)
+{
+	bool data_or_error;
+
+	spin_lock_irq(&file_data->err_lock);
+	data_or_error = !usb_anchor_empty(&file_data->in_anchor)
+			|| file_data->in_status;
+	spin_unlock_irq(&file_data->err_lock);
+	dev_dbg(&file_data->data->intf->dev, "%s: returns %d\n", __func__,
+		data_or_error);
+	return data_or_error;
+}
+
+static ssize_t usbtmc_generic_read(struct usbtmc_file_data *file_data,
+				   void __user *user_buffer,
+				   u32 transfer_size,
+				   u32 *transferred,
+				   u32 flags)
+{
+	struct usbtmc_device_data *data = file_data->data;
+	struct device *dev = &data->intf->dev;
+	u32 done = 0;
+	u32 remaining;
+	const u32 bufsize = USBTMC_BUFSIZE;
+	int retval = 0;
+	u32 max_transfer_size;
+	unsigned long expire;
+	int bufcount = 1;
+	int again = 0;
+
+	/* mutex already locked */
+
+	*transferred = done;
+
+	max_transfer_size = transfer_size;
+
+	if (flags & USBTMC_FLAG_IGNORE_TRAILER) {
+		/* The device may send extra alignment bytes (up to
+		 * wMaxPacketSize – 1) to avoid sending a zero-length
+		 * packet
+		 */
+		remaining = transfer_size;
+		if ((max_transfer_size % data->wMaxPacketSize) == 0)
+			max_transfer_size += (data->wMaxPacketSize - 1);
+	} else {
+		/* round down to bufsize to avoid truncated data left */
+		if (max_transfer_size > bufsize) {
+			max_transfer_size =
+				roundup(max_transfer_size + 1 - bufsize,
+					bufsize);
+		}
+		remaining = max_transfer_size;
+	}
+
+	spin_lock_irq(&file_data->err_lock);
+
+	if (file_data->in_status) {
+		/* return the very first error */
+		retval = file_data->in_status;
+		spin_unlock_irq(&file_data->err_lock);
+		goto error;
+	}
+
+	if (flags & USBTMC_FLAG_ASYNC) {
+		if (usb_anchor_empty(&file_data->in_anchor))
+			again = 1;
+
+		if (file_data->in_urbs_used == 0) {
+			file_data->in_transfer_size = 0;
+			file_data->in_status = 0;
+		}
+	} else {
+		file_data->in_transfer_size = 0;
+		file_data->in_status = 0;
+	}
+
+	if (max_transfer_size == 0) {
+		bufcount = 0;
+	} else {
+		bufcount = roundup(max_transfer_size, bufsize) / bufsize;
+		if (bufcount > file_data->in_urbs_used)
+			bufcount -= file_data->in_urbs_used;
+		else
+			bufcount = 0;
+
+		if (bufcount + file_data->in_urbs_used > MAX_URBS_IN_FLIGHT) {
+			bufcount = MAX_URBS_IN_FLIGHT -
+					file_data->in_urbs_used;
+		}
+	}
+	spin_unlock_irq(&file_data->err_lock);
+
+	dev_dbg(dev, "%s: requested=%u flags=0x%X size=%u bufs=%d used=%d\n",
+		__func__, transfer_size, flags,
+		max_transfer_size, bufcount, file_data->in_urbs_used);
+
+	while (bufcount > 0) {
+		u8 *dmabuf = NULL;
+		struct urb *urb = usbtmc_create_urb();
+
+		if (!urb) {
+			retval = -ENOMEM;
+			goto error;
+		}
+
+		dmabuf = urb->transfer_buffer;
+
+		usb_fill_bulk_urb(urb, data->usb_dev,
+			usb_rcvbulkpipe(data->usb_dev, data->bulk_in),
+			dmabuf, bufsize,
+			usbtmc_read_bulk_cb, file_data);
+
+		usb_anchor_urb(urb, &file_data->submitted);
+		retval = usb_submit_urb(urb, GFP_KERNEL);
+		/* urb is anchored. We can release our reference. */
+		usb_free_urb(urb);
+		if (unlikely(retval)) {
+			usb_unanchor_urb(urb);
+			goto error;
+		}
+		file_data->in_urbs_used++;
+		bufcount--;
+	}
+
+	if (again) {
+		dev_dbg(dev, "%s: ret=again\n", __func__);
+		return -EAGAIN;
+	}
+
+	if (user_buffer == NULL)
+		return -EINVAL;
+
+	expire = msecs_to_jiffies(file_data->timeout);
+
+	while (max_transfer_size > 0) {
+		u32 this_part;
+		struct urb *urb = NULL;
+
+		if (!(flags & USBTMC_FLAG_ASYNC)) {
+			dev_dbg(dev, "%s: before wait time %lu\n",
+				__func__, expire);
+			retval = wait_event_interruptible_timeout(
+				file_data->wait_bulk_in,
+				usbtmc_do_transfer(file_data),
+				expire);
+
+			dev_dbg(dev, "%s: wait returned %d\n",
+				__func__, retval);
+
+			if (retval <= 0) {
+				if (retval == 0)
+					retval = -ETIMEDOUT;
+				goto error;
+			}
+		}
+
+		urb = usb_get_from_anchor(&file_data->in_anchor);
+		if (!urb) {
+			if (!(flags & USBTMC_FLAG_ASYNC)) {
+				/* synchronous case: must not happen */
+				retval = -EFAULT;
+				goto error;
+			}
+
+			/* asynchronous case: ready, do not block or wait */
+			*transferred = done;
+			dev_dbg(dev, "%s: (async) done=%u ret=0\n",
+				__func__, done);
+			return 0;
+		}
+
+		file_data->in_urbs_used--;
+
+		if (max_transfer_size > urb->actual_length)
+			max_transfer_size -= urb->actual_length;
+		else
+			max_transfer_size = 0;
+
+		if (remaining > urb->actual_length)
+			this_part = urb->actual_length;
+		else
+			this_part = remaining;
+
+		print_hex_dump_debug("usbtmc ", DUMP_PREFIX_NONE, 16, 1,
+			urb->transfer_buffer, urb->actual_length, true);
+
+		if (copy_to_user(user_buffer + done,
+				 urb->transfer_buffer, this_part)) {
+			usb_free_urb(urb);
+			retval = -EFAULT;
+			goto error;
+		}
+
+		remaining -= this_part;
+		done += this_part;
+
+		spin_lock_irq(&file_data->err_lock);
+		if (urb->status) {
+			/* return the very first error */
+			retval = file_data->in_status;
+			spin_unlock_irq(&file_data->err_lock);
+			usb_free_urb(urb);
+			goto error;
+		}
+		spin_unlock_irq(&file_data->err_lock);
+
+		if (urb->actual_length < bufsize) {
+			/* short packet or ZLP received => ready */
+			usb_free_urb(urb);
+			retval = 1;
+			break;
+		}
+
+		if (!(flags & USBTMC_FLAG_ASYNC) &&
+		    max_transfer_size > (bufsize * file_data->in_urbs_used)) {
+			/* resubmit, since other buffers still not enough */
+			usb_anchor_urb(urb, &file_data->submitted);
+			retval = usb_submit_urb(urb, GFP_KERNEL);
+			if (unlikely(retval)) {
+				usb_unanchor_urb(urb);
+				usb_free_urb(urb);
+				goto error;
+			}
+			file_data->in_urbs_used++;
+		}
+		usb_free_urb(urb);
+		retval = 0;
+	}
+
+error:
+	*transferred = done;
+
+	dev_dbg(dev, "%s: before kill\n", __func__);
+	/* Attention: killing urbs can take long time (2 ms) */
+	usb_kill_anchored_urbs(&file_data->submitted);
+	dev_dbg(dev, "%s: after kill\n", __func__);
+	usb_scuttle_anchored_urbs(&file_data->in_anchor);
+	file_data->in_urbs_used = 0;
+	file_data->in_status = 0; /* no spinlock needed here */
+	dev_dbg(dev, "%s: done=%u ret=%d\n", __func__, done, retval);
+
+	return retval;
+}
+
+static ssize_t usbtmc_ioctl_generic_read(struct usbtmc_file_data *file_data,
+					 void __user *arg)
+{
+	struct usbtmc_message msg;
+	ssize_t retval = 0;
+
+	/* mutex already locked */
+
+	if (copy_from_user(&msg, arg, sizeof(struct usbtmc_message)))
+		return -EFAULT;
+
+	retval = usbtmc_generic_read(file_data, msg.message,
+				     msg.transfer_size, &msg.transferred,
+				     msg.flags);
+
+	if (put_user(msg.transferred,
+		     &((struct usbtmc_message __user *)arg)->transferred))
+		return -EFAULT;
+
+	return retval;
+}
+
+static void usbtmc_write_bulk_cb(struct urb *urb)
+{
+	struct usbtmc_file_data *file_data = urb->context;
+	int wakeup = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&file_data->err_lock, flags);
+	file_data->out_transfer_size += urb->actual_length;
+
+	/* sync/async unlink faults aren't errors */
+	if (urb->status) {
+		if (!(urb->status == -ENOENT ||
+			urb->status == -ECONNRESET ||
+			urb->status == -ESHUTDOWN))
+			dev_err(&file_data->data->intf->dev,
+				"%s - nonzero write bulk status received: %d\n",
+				__func__, urb->status);
+
+		if (!file_data->out_status) {
+			file_data->out_status = urb->status;
+			wakeup = 1;
+		}
+	}
+	spin_unlock_irqrestore(&file_data->err_lock, flags);
+
+	dev_dbg(&file_data->data->intf->dev,
+		"%s - write bulk total size: %u\n",
+		__func__, file_data->out_transfer_size);
+
+	up(&file_data->limit_write_sem);
+	if (usb_anchor_empty(&file_data->submitted) || wakeup)
+		wake_up_interruptible(&file_data->data->waitq);
+}
+
+static ssize_t usbtmc_generic_write(struct usbtmc_file_data *file_data,
+				    const void __user *user_buffer,
+				    u32 transfer_size,
+				    u32 *transferred,
+				    u32 flags)
+{
+	struct usbtmc_device_data *data = file_data->data;
+	struct device *dev;
+	u32 done = 0;
+	u32 remaining;
+	unsigned long expire;
+	const u32 bufsize = USBTMC_BUFSIZE;
+	struct urb *urb = NULL;
+	int retval = 0;
+	u32 timeout;
+
+	*transferred = 0;
+
+	/* Get pointer to private data structure */
+	dev = &data->intf->dev;
+
+	dev_dbg(dev, "%s: size=%u flags=0x%X sema=%u\n",
+		__func__, transfer_size, flags,
+		file_data->limit_write_sem.count);
+
+	if (flags & USBTMC_FLAG_APPEND) {
+		spin_lock_irq(&file_data->err_lock);
+		retval = file_data->out_status;
+		spin_unlock_irq(&file_data->err_lock);
+		if (retval < 0)
+			return retval;
+	} else {
+		spin_lock_irq(&file_data->err_lock);
+		file_data->out_transfer_size = 0;
+		file_data->out_status = 0;
+		spin_unlock_irq(&file_data->err_lock);
+	}
+
+	remaining = transfer_size;
+	if (remaining > INT_MAX)
+		remaining = INT_MAX;
+
+	timeout = file_data->timeout;
+	expire = msecs_to_jiffies(timeout);
+
+	while (remaining > 0) {
+		u32 this_part, aligned;
+		u8 *buffer = NULL;
+
+		if (flags & USBTMC_FLAG_ASYNC) {
+			if (down_trylock(&file_data->limit_write_sem)) {
+				retval = (done)?(0):(-EAGAIN);
+				goto exit;
+			}
+		} else {
+			retval = down_timeout(&file_data->limit_write_sem,
+					      expire);
+			if (retval < 0) {
+				retval = -ETIMEDOUT;
+				goto error;
+			}
+		}
+
+		spin_lock_irq(&file_data->err_lock);
+		retval = file_data->out_status;
+		spin_unlock_irq(&file_data->err_lock);
+		if (retval < 0) {
+			up(&file_data->limit_write_sem);
+			goto error;
+		}
+
+		/* prepare next urb to send */
+		urb = usbtmc_create_urb();
+		if (!urb) {
+			retval = -ENOMEM;
+			up(&file_data->limit_write_sem);
+			goto error;
+		}
+		buffer = urb->transfer_buffer;
+
+		if (remaining > bufsize)
+			this_part = bufsize;
+		else
+			this_part = remaining;
+
+		if (copy_from_user(buffer, user_buffer + done, this_part)) {
+			retval = -EFAULT;
+			up(&file_data->limit_write_sem);
+			goto error;
+		}
+
+		print_hex_dump_debug("usbtmc ", DUMP_PREFIX_NONE,
+			16, 1, buffer, this_part, true);
+
+		/* fill bulk with 32 bit alignment to meet USBTMC specification
+		 * (size + 3 & ~3) rounds up and simplifies user code
+		 */
+		aligned = (this_part + 3) & ~3;
+		dev_dbg(dev, "write(size:%u align:%u done:%u)\n",
+			(unsigned int)this_part,
+			(unsigned int)aligned,
+			(unsigned int)done);
+
+		usb_fill_bulk_urb(urb, data->usb_dev,
+			usb_sndbulkpipe(data->usb_dev, data->bulk_out),
+			urb->transfer_buffer, aligned,
+			usbtmc_write_bulk_cb, file_data);
+
+		usb_anchor_urb(urb, &file_data->submitted);
+		retval = usb_submit_urb(urb, GFP_KERNEL);
+		if (unlikely(retval)) {
+			usb_unanchor_urb(urb);
+			up(&file_data->limit_write_sem);
+			goto error;
+		}
+
+		usb_free_urb(urb);
+		urb = NULL; /* urb will be finally released by usb driver */
+
+		remaining -= this_part;
+		done += this_part;
+	}
+
+	/* All urbs are on the fly */
+	if (!(flags & USBTMC_FLAG_ASYNC)) {
+		if (!usb_wait_anchor_empty_timeout(&file_data->submitted,
+						   timeout)) {
+			retval = -ETIMEDOUT;
+			goto error;
+		}
+	}
+
+	retval = 0;
+	goto exit;
+
+error:
+	usb_kill_anchored_urbs(&file_data->submitted);
+exit:
+	usb_free_urb(urb);
+
+	spin_lock_irq(&file_data->err_lock);
+	if (!(flags & USBTMC_FLAG_ASYNC))
+		done = file_data->out_transfer_size;
+	if (!retval && file_data->out_status)
+		retval = file_data->out_status;
+	spin_unlock_irq(&file_data->err_lock);
+
+	*transferred = done;
+
+	dev_dbg(dev, "%s: done=%u, retval=%d, urbstat=%d\n",
+		__func__, done, retval, file_data->out_status);
+
+	return retval;
+}
+
+static ssize_t usbtmc_ioctl_generic_write(struct usbtmc_file_data *file_data,
+					  void __user *arg)
+{
+	struct usbtmc_message msg;
+	ssize_t retval = 0;
+
+	/* mutex already locked */
+
+	if (copy_from_user(&msg, arg, sizeof(struct usbtmc_message)))
+		return -EFAULT;
+
+	retval = usbtmc_generic_write(file_data, msg.message,
+				      msg.transfer_size, &msg.transferred,
+				      msg.flags);
+
+	if (put_user(msg.transferred,
+		     &((struct usbtmc_message __user *)arg)->transferred))
+		return -EFAULT;
+
+	return retval;
+}
+
+/*
+ * Get the generic write result
+ */
+static ssize_t usbtmc_ioctl_write_result(struct usbtmc_file_data *file_data,
+				void __user *arg)
+{
+	u32 transferred;
+	int retval;
+
+	spin_lock_irq(&file_data->err_lock);
+	transferred = file_data->out_transfer_size;
+	retval = file_data->out_status;
+	spin_unlock_irq(&file_data->err_lock);
+
+	if (put_user(transferred, (__u32 __user *)arg))
+		return -EFAULT;
+
+	return retval;
+}
+
+/*
+ * Sends a REQUEST_DEV_DEP_MSG_IN message on the Bulk-OUT endpoint.
+ * @transfer_size: number of bytes to request from the device.
+ *
+ * See the USBTMC specification, Table 4.
+ *
+ * Also updates bTag_last_write.
+ */
+static int send_request_dev_dep_msg_in(struct usbtmc_file_data *file_data,
+				       u32 transfer_size)
+{
+	struct usbtmc_device_data *data = file_data->data;
+	int retval;
+	u8 *buffer;
+	int actual;
+
+	buffer = kmalloc(USBTMC_HEADER_SIZE, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+	/* Setup IO buffer for REQUEST_DEV_DEP_MSG_IN message
+	 * Refer to class specs for details
+	 */
+	buffer[0] = 2;
+	buffer[1] = data->bTag;
+	buffer[2] = ~data->bTag;
+	buffer[3] = 0; /* Reserved */
+	buffer[4] = transfer_size >> 0;
+	buffer[5] = transfer_size >> 8;
+	buffer[6] = transfer_size >> 16;
+	buffer[7] = transfer_size >> 24;
+	buffer[8] = file_data->term_char_enabled * 2;
+	/* Use term character? */
+	buffer[9] = file_data->term_char;
+	buffer[10] = 0; /* Reserved */
+	buffer[11] = 0; /* Reserved */
+
+	/* Send bulk URB */
+	retval = usb_bulk_msg(data->usb_dev,
+			      usb_sndbulkpipe(data->usb_dev,
+					      data->bulk_out),
+			      buffer, USBTMC_HEADER_SIZE,
+			      &actual, file_data->timeout);
+
+	/* Store bTag (in case we need to abort) */
+	data->bTag_last_write = data->bTag;
+
+	/* Increment bTag -- and increment again if zero */
+	data->bTag++;
+	if (!data->bTag)
+		data->bTag++;
+
+	kfree(buffer);
+	if (retval < 0)
+		dev_err(&data->intf->dev, "%s returned %d\n",
+			__func__, retval);
+
+	return retval;
+}
+
+static ssize_t usbtmc_read(struct file *filp, char __user *buf,
+			   size_t count, loff_t *f_pos)
+{
+	struct usbtmc_file_data *file_data;
+	struct usbtmc_device_data *data;
+	struct device *dev;
+	const u32 bufsize = USBTMC_BUFSIZE;
+	u32 n_characters;
+	u8 *buffer;
+	int actual;
+	u32 done = 0;
+	u32 remaining;
+	int retval;
+
+	/* Get pointer to private data structure */
+	file_data = filp->private_data;
+	data = file_data->data;
+	dev = &data->intf->dev;
+
+	buffer = kmalloc(bufsize, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	mutex_lock(&data->io_mutex);
+	if (data->zombie) {
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	if (count > INT_MAX)
+		count = INT_MAX;
+
+	dev_dbg(dev, "%s(count:%zu)\n", __func__, count);
+
+	retval = send_request_dev_dep_msg_in(file_data, count);
+
+	if (retval < 0) {
+		if (file_data->auto_abort)
+			usbtmc_ioctl_abort_bulk_out(data);
+		goto exit;
+	}
+
+	/* Loop until we have fetched everything we requested */
+	remaining = count;
+	actual = 0;
+
+	/* Send bulk URB */
+	retval = usb_bulk_msg(data->usb_dev,
+			      usb_rcvbulkpipe(data->usb_dev,
+					      data->bulk_in),
+			      buffer, bufsize, &actual,
+			      file_data->timeout);
+
+	dev_dbg(dev, "%s: bulk_msg retval(%u), actual(%d)\n",
+		__func__, retval, actual);
+
+	/* Store bTag (in case we need to abort) */
+	data->bTag_last_read = data->bTag;
+
+	if (retval < 0) {
+		if (file_data->auto_abort)
+			usbtmc_ioctl_abort_bulk_in(data);
+		goto exit;
+	}
+
+	/* Sanity checks for the header */
+	if (actual < USBTMC_HEADER_SIZE) {
+		dev_err(dev, "Device sent too small first packet: %u < %u\n",
+			actual, USBTMC_HEADER_SIZE);
+		if (file_data->auto_abort)
+			usbtmc_ioctl_abort_bulk_in(data);
+		goto exit;
+	}
+
+	if (buffer[0] != 2) {
+		dev_err(dev, "Device sent reply with wrong MsgID: %u != 2\n",
+			buffer[0]);
+		if (file_data->auto_abort)
+			usbtmc_ioctl_abort_bulk_in(data);
+		goto exit;
+	}
+
+	if (buffer[1] != data->bTag_last_write) {
+		dev_err(dev, "Device sent reply with wrong bTag: %u != %u\n",
+		buffer[1], data->bTag_last_write);
+		if (file_data->auto_abort)
+			usbtmc_ioctl_abort_bulk_in(data);
+		goto exit;
+	}
+
+	/* How many characters did the instrument send? */
+	n_characters = buffer[4] +
+		       (buffer[5] << 8) +
+		       (buffer[6] << 16) +
+		       (buffer[7] << 24);
+
+	file_data->bmTransferAttributes = buffer[8];
+
+	dev_dbg(dev, "Bulk-IN header: N_characters(%u), bTransAttr(%u)\n",
+		n_characters, buffer[8]);
+
+	if (n_characters > remaining) {
+		dev_err(dev, "Device wants to return more data than requested: %u > %zu\n",
+			n_characters, count);
+		if (file_data->auto_abort)
+			usbtmc_ioctl_abort_bulk_in(data);
+		goto exit;
+	}
+
+	print_hex_dump_debug("usbtmc ", DUMP_PREFIX_NONE,
+			     16, 1, buffer, actual, true);
+
+	remaining = n_characters;
+
+	/* Remove the USBTMC header */
+	actual -= USBTMC_HEADER_SIZE;
+
+	/* Remove padding if it exists */
+	if (actual > remaining)
+		actual = remaining;
+
+	remaining -= actual;
+
+	/* Copy buffer to user space */
+	if (copy_to_user(buf, &buffer[USBTMC_HEADER_SIZE], actual)) {
+		/* There must have been an addressing problem */
+		retval = -EFAULT;
+		goto exit;
+	}
+
+	if ((actual + USBTMC_HEADER_SIZE) == bufsize) {
+		retval = usbtmc_generic_read(file_data, buf + actual,
+					     remaining,
+					     &done,
+					     USBTMC_FLAG_IGNORE_TRAILER);
+		if (retval < 0)
+			goto exit;
+	}
+	done += actual;
+
+	/* Update file position value */
+	*f_pos = *f_pos + done;
+	retval = done;
+
+exit:
+	mutex_unlock(&data->io_mutex);
+	kfree(buffer);
+	return retval;
+}
+
+static ssize_t usbtmc_write(struct file *filp, const char __user *buf,
+			    size_t count, loff_t *f_pos)
+{
+	struct usbtmc_file_data *file_data;
+	struct usbtmc_device_data *data;
+	struct urb *urb = NULL;
+	ssize_t retval = 0;
+	u8 *buffer;
+	u32 remaining, done;
+	u32 transfersize, aligned, buflen;
+
+	file_data = filp->private_data;
+	data = file_data->data;
+
+	mutex_lock(&data->io_mutex);
+
+	if (data->zombie) {
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	done = 0;
+
+	spin_lock_irq(&file_data->err_lock);
+	file_data->out_transfer_size = 0;
+	file_data->out_status = 0;
+	spin_unlock_irq(&file_data->err_lock);
+
+	if (!count)
+		goto exit;
+
+	if (down_trylock(&file_data->limit_write_sem)) {
+		/* previous calls were async */
+		retval = -EBUSY;
+		goto exit;
+	}
+
+	urb = usbtmc_create_urb();
+	if (!urb) {
+		retval = -ENOMEM;
+		up(&file_data->limit_write_sem);
+		goto exit;
+	}
+
+	buffer = urb->transfer_buffer;
+	buflen = urb->transfer_buffer_length;
+
+	if (count > INT_MAX) {
+		transfersize = INT_MAX;
+		buffer[8] = 0;
+	} else {
+		transfersize = count;
+		buffer[8] = file_data->eom_val;
+	}
+
+	/* Setup IO buffer for DEV_DEP_MSG_OUT message */
+	buffer[0] = 1;
+	buffer[1] = data->bTag;
+	buffer[2] = ~data->bTag;
+	buffer[3] = 0; /* Reserved */
+	buffer[4] = transfersize >> 0;
+	buffer[5] = transfersize >> 8;
+	buffer[6] = transfersize >> 16;
+	buffer[7] = transfersize >> 24;
+	/* buffer[8] is set above... */
+	buffer[9] = 0; /* Reserved */
+	buffer[10] = 0; /* Reserved */
+	buffer[11] = 0; /* Reserved */
+
+	remaining = transfersize;
+
+	if (transfersize + USBTMC_HEADER_SIZE > buflen) {
+		transfersize = buflen - USBTMC_HEADER_SIZE;
+		aligned = buflen;
+	} else {
+		aligned = (transfersize + (USBTMC_HEADER_SIZE + 3)) & ~3;
+	}
+
+	if (copy_from_user(&buffer[USBTMC_HEADER_SIZE], buf, transfersize)) {
+		retval = -EFAULT;
+		up(&file_data->limit_write_sem);
+		goto exit;
+	}
+
+	dev_dbg(&data->intf->dev, "%s(size:%u align:%u)\n", __func__,
+		(unsigned int)transfersize, (unsigned int)aligned);
+
+	print_hex_dump_debug("usbtmc ", DUMP_PREFIX_NONE,
+			     16, 1, buffer, aligned, true);
+
+	usb_fill_bulk_urb(urb, data->usb_dev,
+		usb_sndbulkpipe(data->usb_dev, data->bulk_out),
+		urb->transfer_buffer, aligned,
+		usbtmc_write_bulk_cb, file_data);
+
+	usb_anchor_urb(urb, &file_data->submitted);
+	retval = usb_submit_urb(urb, GFP_KERNEL);
+	if (unlikely(retval)) {
+		usb_unanchor_urb(urb);
+		up(&file_data->limit_write_sem);
+		goto exit;
+	}
+
+	remaining -= transfersize;
+
+	data->bTag_last_write = data->bTag;
+	data->bTag++;
+
+	if (!data->bTag)
+		data->bTag++;
+
+	/* call generic_write even when remaining = 0 */
+	retval = usbtmc_generic_write(file_data, buf + transfersize, remaining,
+				      &done, USBTMC_FLAG_APPEND);
+	/* truncate alignment bytes */
+	if (done > remaining)
+		done = remaining;
+
+	/*add size of first urb*/
+	done += transfersize;
+
+	if (retval < 0) {
+		usb_kill_anchored_urbs(&file_data->submitted);
+
+		dev_err(&data->intf->dev,
+			"Unable to send data, error %d\n", (int)retval);
+		if (file_data->auto_abort)
+			usbtmc_ioctl_abort_bulk_out(data);
+		goto exit;
+	}
+
+	retval = done;
+exit:
+	usb_free_urb(urb);
+	mutex_unlock(&data->io_mutex);
+	return retval;
+}
+
+static int usbtmc_ioctl_clear(struct usbtmc_device_data *data)
+{
+	struct device *dev;
+	u8 *buffer;
+	int rv;
+	int n;
+	int actual = 0;
+
+	dev = &data->intf->dev;
+
+	dev_dbg(dev, "Sending INITIATE_CLEAR request\n");
+
+	buffer = kmalloc(USBTMC_BUFSIZE, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	rv = usb_control_msg(data->usb_dev,
+			     usb_rcvctrlpipe(data->usb_dev, 0),
+			     USBTMC_REQUEST_INITIATE_CLEAR,
+			     USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			     0, 0, buffer, 1, USB_CTRL_GET_TIMEOUT);
+	if (rv < 0) {
+		dev_err(dev, "usb_control_msg returned %d\n", rv);
+		goto exit;
+	}
+
+	dev_dbg(dev, "INITIATE_CLEAR returned %x\n", buffer[0]);
+
+	if (buffer[0] != USBTMC_STATUS_SUCCESS) {
+		dev_err(dev, "INITIATE_CLEAR returned %x\n", buffer[0]);
+		rv = -EPERM;
+		goto exit;
+	}
+
+	n = 0;
+
+usbtmc_clear_check_status:
+
+	dev_dbg(dev, "Sending CHECK_CLEAR_STATUS request\n");
+
+	rv = usb_control_msg(data->usb_dev,
+			     usb_rcvctrlpipe(data->usb_dev, 0),
+			     USBTMC_REQUEST_CHECK_CLEAR_STATUS,
+			     USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			     0, 0, buffer, 2, USB_CTRL_GET_TIMEOUT);
+	if (rv < 0) {
+		dev_err(dev, "usb_control_msg returned %d\n", rv);
+		goto exit;
+	}
+
+	dev_dbg(dev, "CHECK_CLEAR_STATUS returned %x\n", buffer[0]);
+
+	if (buffer[0] == USBTMC_STATUS_SUCCESS)
+		goto usbtmc_clear_bulk_out_halt;
+
+	if (buffer[0] != USBTMC_STATUS_PENDING) {
+		dev_err(dev, "CHECK_CLEAR_STATUS returned %x\n", buffer[0]);
+		rv = -EPERM;
+		goto exit;
+	}
+
+	if ((buffer[1] & 1) != 0) {
+		do {
+			dev_dbg(dev, "Reading from bulk in EP\n");
+
+			actual = 0;
+			rv = usb_bulk_msg(data->usb_dev,
+					  usb_rcvbulkpipe(data->usb_dev,
+							  data->bulk_in),
+					  buffer, USBTMC_BUFSIZE,
+					  &actual, USB_CTRL_GET_TIMEOUT);
+
+			print_hex_dump_debug("usbtmc ", DUMP_PREFIX_NONE,
+					     16, 1, buffer, actual, true);
+
+			n++;
+
+			if (rv < 0) {
+				dev_err(dev, "usb_control_msg returned %d\n",
+					rv);
+				goto exit;
+			}
+		} while ((actual == USBTMC_BUFSIZE) &&
+			  (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN));
+	} else {
+		/* do not stress device with subsequent requests */
+		msleep(50);
+		n++;
+	}
+
+	if (n >= USBTMC_MAX_READS_TO_CLEAR_BULK_IN) {
+		dev_err(dev, "Couldn't clear device buffer within %d cycles\n",
+			USBTMC_MAX_READS_TO_CLEAR_BULK_IN);
+		rv = -EPERM;
+		goto exit;
+	}
+
+	goto usbtmc_clear_check_status;
+
+usbtmc_clear_bulk_out_halt:
+
+	rv = usb_clear_halt(data->usb_dev,
+			    usb_sndbulkpipe(data->usb_dev, data->bulk_out));
+	if (rv < 0) {
+		dev_err(dev, "usb_clear_halt returned %d\n", rv);
+		goto exit;
+	}
+	rv = 0;
+
+exit:
+	kfree(buffer);
+	return rv;
+}
+
+static int usbtmc_ioctl_clear_out_halt(struct usbtmc_device_data *data)
+{
+	int rv;
+
+	rv = usb_clear_halt(data->usb_dev,
+			    usb_sndbulkpipe(data->usb_dev, data->bulk_out));
+
+	if (rv < 0)
+		dev_err(&data->usb_dev->dev, "%s returned %d\n", __func__, rv);
+	return rv;
+}
+
+static int usbtmc_ioctl_clear_in_halt(struct usbtmc_device_data *data)
+{
+	int rv;
+
+	rv = usb_clear_halt(data->usb_dev,
+			    usb_rcvbulkpipe(data->usb_dev, data->bulk_in));
+
+	if (rv < 0)
+		dev_err(&data->usb_dev->dev, "%s returned %d\n", __func__, rv);
+	return rv;
+}
+
+static int usbtmc_ioctl_cancel_io(struct usbtmc_file_data *file_data)
+{
+	spin_lock_irq(&file_data->err_lock);
+	file_data->in_status = -ECANCELED;
+	file_data->out_status = -ECANCELED;
+	spin_unlock_irq(&file_data->err_lock);
+	usb_kill_anchored_urbs(&file_data->submitted);
+	return 0;
+}
+
+static int usbtmc_ioctl_cleanup_io(struct usbtmc_file_data *file_data)
+{
+	usb_kill_anchored_urbs(&file_data->submitted);
+	usb_scuttle_anchored_urbs(&file_data->in_anchor);
+	spin_lock_irq(&file_data->err_lock);
+	file_data->in_status = 0;
+	file_data->in_transfer_size = 0;
+	file_data->out_status = 0;
+	file_data->out_transfer_size = 0;
+	spin_unlock_irq(&file_data->err_lock);
+
+	file_data->in_urbs_used = 0;
+	return 0;
+}
+
+static int get_capabilities(struct usbtmc_device_data *data)
+{
+	struct device *dev = &data->usb_dev->dev;
+	char *buffer;
+	int rv = 0;
+
+	buffer = kmalloc(0x18, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	rv = usb_control_msg(data->usb_dev, usb_rcvctrlpipe(data->usb_dev, 0),
+			     USBTMC_REQUEST_GET_CAPABILITIES,
+			     USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			     0, 0, buffer, 0x18, USB_CTRL_GET_TIMEOUT);
+	if (rv < 0) {
+		dev_err(dev, "usb_control_msg returned %d\n", rv);
+		goto err_out;
+	}
+
+	dev_dbg(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
+	if (buffer[0] != USBTMC_STATUS_SUCCESS) {
+		dev_err(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
+		rv = -EPERM;
+		goto err_out;
+	}
+	dev_dbg(dev, "Interface capabilities are %x\n", buffer[4]);
+	dev_dbg(dev, "Device capabilities are %x\n", buffer[5]);
+	dev_dbg(dev, "USB488 interface capabilities are %x\n", buffer[14]);
+	dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]);
+
+	data->capabilities.interface_capabilities = buffer[4];
+	data->capabilities.device_capabilities = buffer[5];
+	data->capabilities.usb488_interface_capabilities = buffer[14];
+	data->capabilities.usb488_device_capabilities = buffer[15];
+	data->usb488_caps = (buffer[14] & 0x07) | ((buffer[15] & 0x0f) << 4);
+	rv = 0;
+
+err_out:
+	kfree(buffer);
+	return rv;
+}
+
+#define capability_attribute(name)					\
+static ssize_t name##_show(struct device *dev,				\
+			   struct device_attribute *attr, char *buf)	\
+{									\
+	struct usb_interface *intf = to_usb_interface(dev);		\
+	struct usbtmc_device_data *data = usb_get_intfdata(intf);	\
+									\
+	return sprintf(buf, "%d\n", data->capabilities.name);		\
+}									\
+static DEVICE_ATTR_RO(name)
+
+capability_attribute(interface_capabilities);
+capability_attribute(device_capabilities);
+capability_attribute(usb488_interface_capabilities);
+capability_attribute(usb488_device_capabilities);
+
+static struct attribute *usbtmc_attrs[] = {
+	&dev_attr_interface_capabilities.attr,
+	&dev_attr_device_capabilities.attr,
+	&dev_attr_usb488_interface_capabilities.attr,
+	&dev_attr_usb488_device_capabilities.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(usbtmc);
+
+static int usbtmc_ioctl_indicator_pulse(struct usbtmc_device_data *data)
+{
+	struct device *dev;
+	u8 *buffer;
+	int rv;
+
+	dev = &data->intf->dev;
+
+	buffer = kmalloc(2, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	rv = usb_control_msg(data->usb_dev,
+			     usb_rcvctrlpipe(data->usb_dev, 0),
+			     USBTMC_REQUEST_INDICATOR_PULSE,
+			     USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			     0, 0, buffer, 0x01, USB_CTRL_GET_TIMEOUT);
+
+	if (rv < 0) {
+		dev_err(dev, "usb_control_msg returned %d\n", rv);
+		goto exit;
+	}
+
+	dev_dbg(dev, "INDICATOR_PULSE returned %x\n", buffer[0]);
+
+	if (buffer[0] != USBTMC_STATUS_SUCCESS) {
+		dev_err(dev, "INDICATOR_PULSE returned %x\n", buffer[0]);
+		rv = -EPERM;
+		goto exit;
+	}
+	rv = 0;
+
+exit:
+	kfree(buffer);
+	return rv;
+}
+
+static int usbtmc_ioctl_request(struct usbtmc_device_data *data,
+				void __user *arg)
+{
+	struct device *dev = &data->intf->dev;
+	struct usbtmc_ctrlrequest request;
+	u8 *buffer = NULL;
+	int rv;
+	unsigned int is_in, pipe;
+	unsigned long res;
+
+	res = copy_from_user(&request, arg, sizeof(struct usbtmc_ctrlrequest));
+	if (res)
+		return -EFAULT;
+
+	if (request.req.wLength > USBTMC_BUFSIZE)
+		return -EMSGSIZE;
+	if (request.req.wLength == 0)	/* Length-0 requests are never IN */
+		request.req.bRequestType &= ~USB_DIR_IN;
+
+	is_in = request.req.bRequestType & USB_DIR_IN;
+
+	if (request.req.wLength) {
+		buffer = kmalloc(request.req.wLength, GFP_KERNEL);
+		if (!buffer)
+			return -ENOMEM;
+
+		if (!is_in) {
+			/* Send control data to device */
+			res = copy_from_user(buffer, request.data,
+					     request.req.wLength);
+			if (res) {
+				rv = -EFAULT;
+				goto exit;
+			}
+		}
+	}
+
+	if (is_in)
+		pipe = usb_rcvctrlpipe(data->usb_dev, 0);
+	else
+		pipe = usb_sndctrlpipe(data->usb_dev, 0);
+	rv = usb_control_msg(data->usb_dev,
+			pipe,
+			request.req.bRequest,
+			request.req.bRequestType,
+			request.req.wValue,
+			request.req.wIndex,
+			buffer, request.req.wLength, USB_CTRL_GET_TIMEOUT);
+
+	if (rv < 0) {
+		dev_err(dev, "%s failed %d\n", __func__, rv);
+		goto exit;
+	}
+
+	if (rv && is_in) {
+		/* Read control data from device */
+		res = copy_to_user(request.data, buffer, rv);
+		if (res)
+			rv = -EFAULT;
+	}
+
+ exit:
+	kfree(buffer);
+	return rv;
+}
+
+/*
+ * Get the usb timeout value
+ */
+static int usbtmc_ioctl_get_timeout(struct usbtmc_file_data *file_data,
+				void __user *arg)
+{
+	u32 timeout;
+
+	timeout = file_data->timeout;
+
+	return put_user(timeout, (__u32 __user *)arg);
+}
+
+/*
+ * Set the usb timeout value
+ */
+static int usbtmc_ioctl_set_timeout(struct usbtmc_file_data *file_data,
+				void __user *arg)
+{
+	u32 timeout;
+
+	if (get_user(timeout, (__u32 __user *)arg))
+		return -EFAULT;
+
+	/* Note that timeout = 0 means
+	 * MAX_SCHEDULE_TIMEOUT in usb_control_msg
+	 */
+	if (timeout < USBTMC_MIN_TIMEOUT)
+		return -EINVAL;
+
+	file_data->timeout = timeout;
+
+	return 0;
+}
+
+/*
+ * enables/disables sending EOM on write
+ */
+static int usbtmc_ioctl_eom_enable(struct usbtmc_file_data *file_data,
+				void __user *arg)
+{
+	u8 eom_enable;
+
+	if (copy_from_user(&eom_enable, arg, sizeof(eom_enable)))
+		return -EFAULT;
+
+	if (eom_enable > 1)
+		return -EINVAL;
+
+	file_data->eom_val = eom_enable;
+
+	return 0;
+}
+
+/*
+ * Configure termination character for read()
+ */
+static int usbtmc_ioctl_config_termc(struct usbtmc_file_data *file_data,
+				void __user *arg)
+{
+	struct usbtmc_termchar termc;
+
+	if (copy_from_user(&termc, arg, sizeof(termc)))
+		return -EFAULT;
+
+	if ((termc.term_char_enabled > 1) ||
+		(termc.term_char_enabled &&
+		!(file_data->data->capabilities.device_capabilities & 1)))
+		return -EINVAL;
+
+	file_data->term_char = termc.term_char;
+	file_data->term_char_enabled = termc.term_char_enabled;
+
+	return 0;
+}
+
+static long usbtmc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct usbtmc_file_data *file_data;
+	struct usbtmc_device_data *data;
+	int retval = -EBADRQC;
+	__u8 tmp_byte;
+
+	file_data = file->private_data;
+	data = file_data->data;
+
+	mutex_lock(&data->io_mutex);
+	if (data->zombie) {
+		retval = -ENODEV;
+		goto skip_io_on_zombie;
+	}
+
+	switch (cmd) {
+	case USBTMC_IOCTL_CLEAR_OUT_HALT:
+		retval = usbtmc_ioctl_clear_out_halt(data);
+		break;
+
+	case USBTMC_IOCTL_CLEAR_IN_HALT:
+		retval = usbtmc_ioctl_clear_in_halt(data);
+		break;
+
+	case USBTMC_IOCTL_INDICATOR_PULSE:
+		retval = usbtmc_ioctl_indicator_pulse(data);
+		break;
+
+	case USBTMC_IOCTL_CLEAR:
+		retval = usbtmc_ioctl_clear(data);
+		break;
+
+	case USBTMC_IOCTL_ABORT_BULK_OUT:
+		retval = usbtmc_ioctl_abort_bulk_out(data);
+		break;
+
+	case USBTMC_IOCTL_ABORT_BULK_IN:
+		retval = usbtmc_ioctl_abort_bulk_in(data);
+		break;
+
+	case USBTMC_IOCTL_CTRL_REQUEST:
+		retval = usbtmc_ioctl_request(data, (void __user *)arg);
+		break;
+
+	case USBTMC_IOCTL_GET_TIMEOUT:
+		retval = usbtmc_ioctl_get_timeout(file_data,
+						  (void __user *)arg);
+		break;
+
+	case USBTMC_IOCTL_SET_TIMEOUT:
+		retval = usbtmc_ioctl_set_timeout(file_data,
+						  (void __user *)arg);
+		break;
+
+	case USBTMC_IOCTL_EOM_ENABLE:
+		retval = usbtmc_ioctl_eom_enable(file_data,
+						 (void __user *)arg);
+		break;
+
+	case USBTMC_IOCTL_CONFIG_TERMCHAR:
+		retval = usbtmc_ioctl_config_termc(file_data,
+						   (void __user *)arg);
+		break;
+
+	case USBTMC_IOCTL_WRITE:
+		retval = usbtmc_ioctl_generic_write(file_data,
+						    (void __user *)arg);
+		break;
+
+	case USBTMC_IOCTL_READ:
+		retval = usbtmc_ioctl_generic_read(file_data,
+						   (void __user *)arg);
+		break;
+
+	case USBTMC_IOCTL_WRITE_RESULT:
+		retval = usbtmc_ioctl_write_result(file_data,
+						   (void __user *)arg);
+		break;
+
+	case USBTMC_IOCTL_API_VERSION:
+		retval = put_user(USBTMC_API_VERSION,
+				  (__u32 __user *)arg);
+		break;
+
+	case USBTMC488_IOCTL_GET_CAPS:
+		retval = put_user(data->usb488_caps,
+				  (unsigned char __user *)arg);
+		break;
+
+	case USBTMC488_IOCTL_READ_STB:
+		retval = usbtmc488_ioctl_read_stb(file_data,
+						  (void __user *)arg);
+		break;
+
+	case USBTMC488_IOCTL_REN_CONTROL:
+		retval = usbtmc488_ioctl_simple(data, (void __user *)arg,
+						USBTMC488_REQUEST_REN_CONTROL);
+		break;
+
+	case USBTMC488_IOCTL_GOTO_LOCAL:
+		retval = usbtmc488_ioctl_simple(data, (void __user *)arg,
+						USBTMC488_REQUEST_GOTO_LOCAL);
+		break;
+
+	case USBTMC488_IOCTL_LOCAL_LOCKOUT:
+		retval = usbtmc488_ioctl_simple(data, (void __user *)arg,
+						USBTMC488_REQUEST_LOCAL_LOCKOUT);
+		break;
+
+	case USBTMC488_IOCTL_TRIGGER:
+		retval = usbtmc488_ioctl_trigger(file_data);
+		break;
+
+	case USBTMC488_IOCTL_WAIT_SRQ:
+		retval = usbtmc488_ioctl_wait_srq(file_data,
+						  (__u32 __user *)arg);
+		break;
+
+	case USBTMC_IOCTL_MSG_IN_ATTR:
+		retval = put_user(file_data->bmTransferAttributes,
+				  (__u8 __user *)arg);
+		break;
+
+	case USBTMC_IOCTL_AUTO_ABORT:
+		retval = get_user(tmp_byte, (unsigned char __user *)arg);
+		if (retval == 0)
+			file_data->auto_abort = !!tmp_byte;
+		break;
+
+	case USBTMC_IOCTL_GET_STB:
+		retval = usbtmc_get_stb(file_data, &tmp_byte);
+		if (retval > 0)
+			retval = put_user(tmp_byte, (__u8 __user *)arg);
+		break;
+
+	case USBTMC_IOCTL_GET_SRQ_STB:
+		retval = usbtmc_ioctl_get_srq_stb(file_data,
+						  (void __user *)arg);
+		break;
+
+	case USBTMC_IOCTL_CANCEL_IO:
+		retval = usbtmc_ioctl_cancel_io(file_data);
+		break;
+
+	case USBTMC_IOCTL_CLEANUP_IO:
+		retval = usbtmc_ioctl_cleanup_io(file_data);
+		break;
+	}
+
+skip_io_on_zombie:
+	mutex_unlock(&data->io_mutex);
+	return retval;
+}
+
+static int usbtmc_fasync(int fd, struct file *file, int on)
+{
+	struct usbtmc_file_data *file_data = file->private_data;
+
+	return fasync_helper(fd, file, on, &file_data->data->fasync);
+}
+
+static __poll_t usbtmc_poll(struct file *file, poll_table *wait)
+{
+	struct usbtmc_file_data *file_data = file->private_data;
+	struct usbtmc_device_data *data = file_data->data;
+	__poll_t mask;
+
+	mutex_lock(&data->io_mutex);
+
+	if (data->zombie) {
+		mask = EPOLLHUP | EPOLLERR;
+		goto no_poll;
+	}
+
+	poll_wait(file, &data->waitq, wait);
+
+	/* Note that EPOLLPRI is now assigned to SRQ, and
+	 * EPOLLIN|EPOLLRDNORM to normal read data.
+	 */
+	mask = 0;
+	if (atomic_read(&file_data->srq_asserted))
+		mask |= EPOLLPRI;
+
+	/* Note that the anchor submitted includes all urbs for BULK IN
+	 * and OUT. So EPOLLOUT is signaled when BULK OUT is empty and
+	 * all BULK IN urbs are completed and moved to in_anchor.
+	 */
+	if (usb_anchor_empty(&file_data->submitted))
+		mask |= (EPOLLOUT | EPOLLWRNORM);
+	if (!usb_anchor_empty(&file_data->in_anchor))
+		mask |= (EPOLLIN | EPOLLRDNORM);
+
+	spin_lock_irq(&file_data->err_lock);
+	if (file_data->in_status || file_data->out_status)
+		mask |= EPOLLERR;
+	spin_unlock_irq(&file_data->err_lock);
+
+	dev_dbg(&data->intf->dev, "poll mask = %x\n", mask);
+
+no_poll:
+	mutex_unlock(&data->io_mutex);
+	return mask;
+}
+
+static const struct file_operations fops = {
+	.owner		= THIS_MODULE,
+	.read		= usbtmc_read,
+	.write		= usbtmc_write,
+	.open		= usbtmc_open,
+	.release	= usbtmc_release,
+	.flush		= usbtmc_flush,
+	.unlocked_ioctl	= usbtmc_ioctl,
+	.compat_ioctl	= compat_ptr_ioctl,
+	.fasync         = usbtmc_fasync,
+	.poll           = usbtmc_poll,
+	.llseek		= default_llseek,
+};
+
+static struct usb_class_driver usbtmc_class = {
+	.name =		"usbtmc%d",
+	.fops =		&fops,
+	.minor_base =	USBTMC_MINOR_BASE,
+};
+
+static void usbtmc_interrupt(struct urb *urb)
+{
+	struct usbtmc_device_data *data = urb->context;
+	struct device *dev = &data->intf->dev;
+	int status = urb->status;
+	int rv;
+
+	dev_dbg(&data->intf->dev, "int status: %d len %d\n",
+		status, urb->actual_length);
+
+	switch (status) {
+	case 0: /* SUCCESS */
+		/* check for valid STB notification */
+		if (data->iin_buffer[0] > 0x81) {
+			data->bNotify1 = data->iin_buffer[0];
+			data->bNotify2 = data->iin_buffer[1];
+			atomic_set(&data->iin_data_valid, 1);
+			wake_up_interruptible(&data->waitq);
+			goto exit;
+		}
+		/* check for SRQ notification */
+		if (data->iin_buffer[0] == 0x81) {
+			unsigned long flags;
+			struct list_head *elem;
+
+			if (data->fasync)
+				kill_fasync(&data->fasync,
+					SIGIO, POLL_PRI);
+
+			spin_lock_irqsave(&data->dev_lock, flags);
+			list_for_each(elem, &data->file_list) {
+				struct usbtmc_file_data *file_data;
+
+				file_data = list_entry(elem,
+						       struct usbtmc_file_data,
+						       file_elem);
+				file_data->srq_byte = data->iin_buffer[1];
+				atomic_set(&file_data->srq_asserted, 1);
+			}
+			spin_unlock_irqrestore(&data->dev_lock, flags);
+
+			dev_dbg(dev, "srq received bTag %x stb %x\n",
+				(unsigned int)data->iin_buffer[0],
+				(unsigned int)data->iin_buffer[1]);
+			wake_up_interruptible_all(&data->waitq);
+			goto exit;
+		}
+		dev_warn(dev, "invalid notification: %x\n",
+			 data->iin_buffer[0]);
+		break;
+	case -EOVERFLOW:
+		dev_err(dev, "overflow with length %d, actual length is %d\n",
+			data->iin_wMaxPacketSize, urb->actual_length);
+		fallthrough;
+	default:
+		/* urb terminated, clean up */
+		dev_dbg(dev, "urb terminated, status: %d\n", status);
+		return;
+	}
+exit:
+	rv = usb_submit_urb(urb, GFP_ATOMIC);
+	if (rv)
+		dev_err(dev, "usb_submit_urb failed: %d\n", rv);
+}
+
+static void usbtmc_free_int(struct usbtmc_device_data *data)
+{
+	if (!data->iin_ep_present || !data->iin_urb)
+		return;
+	usb_kill_urb(data->iin_urb);
+	kfree(data->iin_buffer);
+	data->iin_buffer = NULL;
+	usb_free_urb(data->iin_urb);
+	data->iin_urb = NULL;
+	kref_put(&data->kref, usbtmc_delete);
+}
+
+static int usbtmc_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	struct usbtmc_device_data *data;
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *bulk_in, *bulk_out, *int_in;
+	int retcode;
+
+	dev_dbg(&intf->dev, "%s called\n", __func__);
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->intf = intf;
+	data->id = id;
+	data->usb_dev = usb_get_dev(interface_to_usbdev(intf));
+	usb_set_intfdata(intf, data);
+	kref_init(&data->kref);
+	mutex_init(&data->io_mutex);
+	init_waitqueue_head(&data->waitq);
+	atomic_set(&data->iin_data_valid, 0);
+	INIT_LIST_HEAD(&data->file_list);
+	spin_lock_init(&data->dev_lock);
+
+	data->zombie = 0;
+
+	/* Initialize USBTMC bTag and other fields */
+	data->bTag	= 1;
+	/*  2 <= bTag <= 127   USBTMC-USB488 subclass specification 4.3.1 */
+	data->iin_bTag = 2;
+
+	/* USBTMC devices have only one setting, so use that */
+	iface_desc = data->intf->cur_altsetting;
+	data->ifnum = iface_desc->desc.bInterfaceNumber;
+
+	/* Find bulk endpoints */
+	retcode = usb_find_common_endpoints(iface_desc,
+			&bulk_in, &bulk_out, NULL, NULL);
+	if (retcode) {
+		dev_err(&intf->dev, "bulk endpoints not found\n");
+		goto err_put;
+	}
+
+	retcode = -EINVAL;
+	data->bulk_in = bulk_in->bEndpointAddress;
+	data->wMaxPacketSize = usb_endpoint_maxp(bulk_in);
+	if (!data->wMaxPacketSize)
+		goto err_put;
+	dev_dbg(&intf->dev, "Found bulk in endpoint at %u\n", data->bulk_in);
+
+	data->bulk_out = bulk_out->bEndpointAddress;
+	dev_dbg(&intf->dev, "Found Bulk out endpoint at %u\n", data->bulk_out);
+
+	/* Find int endpoint */
+	retcode = usb_find_int_in_endpoint(iface_desc, &int_in);
+	if (!retcode) {
+		data->iin_ep_present = 1;
+		data->iin_ep = int_in->bEndpointAddress;
+		data->iin_wMaxPacketSize = usb_endpoint_maxp(int_in);
+		data->iin_interval = int_in->bInterval;
+		dev_dbg(&intf->dev, "Found Int in endpoint at %u\n",
+				data->iin_ep);
+	}
+
+	retcode = get_capabilities(data);
+	if (retcode)
+		dev_err(&intf->dev, "can't read capabilities\n");
+
+	if (data->iin_ep_present) {
+		/* allocate int urb */
+		data->iin_urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!data->iin_urb) {
+			retcode = -ENOMEM;
+			goto error_register;
+		}
+
+		/* Protect interrupt in endpoint data until iin_urb is freed */
+		kref_get(&data->kref);
+
+		/* allocate buffer for interrupt in */
+		data->iin_buffer = kmalloc(data->iin_wMaxPacketSize,
+					GFP_KERNEL);
+		if (!data->iin_buffer) {
+			retcode = -ENOMEM;
+			goto error_register;
+		}
+
+		/* fill interrupt urb */
+		usb_fill_int_urb(data->iin_urb, data->usb_dev,
+				usb_rcvintpipe(data->usb_dev, data->iin_ep),
+				data->iin_buffer, data->iin_wMaxPacketSize,
+				usbtmc_interrupt,
+				data, data->iin_interval);
+
+		retcode = usb_submit_urb(data->iin_urb, GFP_KERNEL);
+		if (retcode) {
+			dev_err(&intf->dev, "Failed to submit iin_urb\n");
+			goto error_register;
+		}
+	}
+
+	retcode = usb_register_dev(intf, &usbtmc_class);
+	if (retcode) {
+		dev_err(&intf->dev, "Not able to get a minor (base %u, slice default): %d\n",
+			USBTMC_MINOR_BASE,
+			retcode);
+		goto error_register;
+	}
+	dev_dbg(&intf->dev, "Using minor number %d\n", intf->minor);
+
+	return 0;
+
+error_register:
+	usbtmc_free_int(data);
+err_put:
+	kref_put(&data->kref, usbtmc_delete);
+	return retcode;
+}
+
+static void usbtmc_disconnect(struct usb_interface *intf)
+{
+	struct usbtmc_device_data *data  = usb_get_intfdata(intf);
+	struct list_head *elem;
+
+	usb_deregister_dev(intf, &usbtmc_class);
+	mutex_lock(&data->io_mutex);
+	data->zombie = 1;
+	wake_up_interruptible_all(&data->waitq);
+	list_for_each(elem, &data->file_list) {
+		struct usbtmc_file_data *file_data;
+
+		file_data = list_entry(elem,
+				       struct usbtmc_file_data,
+				       file_elem);
+		usb_kill_anchored_urbs(&file_data->submitted);
+		usb_scuttle_anchored_urbs(&file_data->in_anchor);
+	}
+	mutex_unlock(&data->io_mutex);
+	usbtmc_free_int(data);
+	kref_put(&data->kref, usbtmc_delete);
+}
+
+static void usbtmc_draw_down(struct usbtmc_file_data *file_data)
+{
+	int time;
+
+	time = usb_wait_anchor_empty_timeout(&file_data->submitted, 1000);
+	if (!time)
+		usb_kill_anchored_urbs(&file_data->submitted);
+	usb_scuttle_anchored_urbs(&file_data->in_anchor);
+}
+
+static int usbtmc_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbtmc_device_data *data = usb_get_intfdata(intf);
+	struct list_head *elem;
+
+	if (!data)
+		return 0;
+
+	mutex_lock(&data->io_mutex);
+	list_for_each(elem, &data->file_list) {
+		struct usbtmc_file_data *file_data;
+
+		file_data = list_entry(elem,
+				       struct usbtmc_file_data,
+				       file_elem);
+		usbtmc_draw_down(file_data);
+	}
+
+	if (data->iin_ep_present && data->iin_urb)
+		usb_kill_urb(data->iin_urb);
+
+	mutex_unlock(&data->io_mutex);
+	return 0;
+}
+
+static int usbtmc_resume(struct usb_interface *intf)
+{
+	struct usbtmc_device_data *data = usb_get_intfdata(intf);
+	int retcode = 0;
+
+	if (data->iin_ep_present && data->iin_urb)
+		retcode = usb_submit_urb(data->iin_urb, GFP_KERNEL);
+	if (retcode)
+		dev_err(&intf->dev, "Failed to submit iin_urb\n");
+
+	return retcode;
+}
+
+static int usbtmc_pre_reset(struct usb_interface *intf)
+{
+	struct usbtmc_device_data *data  = usb_get_intfdata(intf);
+	struct list_head *elem;
+
+	if (!data)
+		return 0;
+
+	mutex_lock(&data->io_mutex);
+
+	list_for_each(elem, &data->file_list) {
+		struct usbtmc_file_data *file_data;
+
+		file_data = list_entry(elem,
+				       struct usbtmc_file_data,
+				       file_elem);
+		usbtmc_ioctl_cancel_io(file_data);
+	}
+
+	return 0;
+}
+
+static int usbtmc_post_reset(struct usb_interface *intf)
+{
+	struct usbtmc_device_data *data  = usb_get_intfdata(intf);
+
+	mutex_unlock(&data->io_mutex);
+
+	return 0;
+}
+
+static struct usb_driver usbtmc_driver = {
+	.name		= "usbtmc",
+	.id_table	= usbtmc_devices,
+	.probe		= usbtmc_probe,
+	.disconnect	= usbtmc_disconnect,
+	.suspend	= usbtmc_suspend,
+	.resume		= usbtmc_resume,
+	.pre_reset	= usbtmc_pre_reset,
+	.post_reset	= usbtmc_post_reset,
+	.dev_groups	= usbtmc_groups,
+};
+
+module_usb_driver(usbtmc_driver);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/common/Kconfig b/drivers/usb/common/Kconfig
new file mode 100644
index 000000000..b85662243
--- /dev/null
+++ b/drivers/usb/common/Kconfig
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config USB_COMMON
+	tristate
+
+
+config USB_LED_TRIG
+	bool "USB LED Triggers"
+	depends on LEDS_CLASS && USB_COMMON && LEDS_TRIGGERS
+	help
+	  This option adds LED triggers for USB host and/or gadget activity.
+
+	  Say Y here if you are working on a system with led-class supported
+	  LEDs and you want to use them as activity indicators for USB host or
+	  gadget.
+
+config USB_ULPI_BUS
+	tristate "USB ULPI PHY interface support"
+	select USB_COMMON
+	help
+	  UTMI+ Low Pin Interface (ULPI) is specification for a commonly used
+	  USB 2.0 PHY interface. The ULPI specification defines a standard set
+	  of registers that can be used to detect the vendor and product which
+	  allows ULPI to be handled as a bus. This module is the driver for that
+	  bus.
+
+	  The ULPI interfaces (the buses) are registered by the drivers for USB
+	  controllers which support ULPI register access and have ULPI PHY
+	  attached to them. The ULPI PHY drivers themselves are normal PHY
+	  drivers.
+
+	  ULPI PHYs provide often functions such as ADP sensing/probing (OTG
+	  protocol) and USB charger detection.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called ulpi.
+
+config USB_CONN_GPIO
+	tristate "USB GPIO Based Connection Detection Driver"
+	depends on GPIOLIB
+	select USB_ROLE_SWITCH
+	select POWER_SUPPLY
+	help
+	  The driver supports USB role switch between host and device via GPIO
+	  based USB cable detection, used typically if an input GPIO is used
+	  to detect USB ID pin, and another input GPIO may be also used to detect
+	  Vbus pin at the same time, it also can be used to enable/disable
+	  device if an input GPIO is only used to detect Vbus pin.
+
+	  To compile the driver as a module, choose M here: the module will
+	  be called usb-conn-gpio.ko
diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
new file mode 100644
index 000000000..8ac4d21ef
--- /dev/null
+++ b/drivers/usb/common/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the usb common parts.
+#
+
+obj-$(CONFIG_USB_COMMON)	  += usb-common.o
+usb-common-y			  += common.o
+usb-common-$(CONFIG_TRACING)	  += debug.o
+usb-common-$(CONFIG_USB_LED_TRIG) += led.o
+
+obj-$(CONFIG_USB_CONN_GPIO)	+= usb-conn-gpio.o
+obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o
+obj-$(CONFIG_USB_ULPI_BUS)	+= ulpi.o
diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
new file mode 100644
index 000000000..c9bdeb4dd
--- /dev/null
+++ b/drivers/usb/common/common.c
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Provides code common for host and device side USB.
+ *
+ * If either host side (ie. CONFIG_USB=y) or device side USB stack
+ * (ie. CONFIG_USB_GADGET=y) is compiled in the kernel, this module is
+ * compiled-in as well.  Otherwise, if either of the two stacks is
+ * compiled as module, this file is compiled as module as well.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+#include <linux/of_platform.h>
+#include <linux/debugfs.h>
+#include "common.h"
+
+static const char *const ep_type_names[] = {
+	[USB_ENDPOINT_XFER_CONTROL] = "ctrl",
+	[USB_ENDPOINT_XFER_ISOC] = "isoc",
+	[USB_ENDPOINT_XFER_BULK] = "bulk",
+	[USB_ENDPOINT_XFER_INT] = "intr",
+};
+
+/**
+ * usb_ep_type_string() - Returns human readable-name of the endpoint type.
+ * @ep_type: The endpoint type to return human-readable name for.  If it's not
+ *   any of the types: USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT},
+ *   usually got by usb_endpoint_type(), the string 'unknown' will be returned.
+ */
+const char *usb_ep_type_string(int ep_type)
+{
+	if (ep_type < 0 || ep_type >= ARRAY_SIZE(ep_type_names))
+		return "unknown";
+
+	return ep_type_names[ep_type];
+}
+EXPORT_SYMBOL_GPL(usb_ep_type_string);
+
+const char *usb_otg_state_string(enum usb_otg_state state)
+{
+	static const char *const names[] = {
+		[OTG_STATE_A_IDLE] = "a_idle",
+		[OTG_STATE_A_WAIT_VRISE] = "a_wait_vrise",
+		[OTG_STATE_A_WAIT_BCON] = "a_wait_bcon",
+		[OTG_STATE_A_HOST] = "a_host",
+		[OTG_STATE_A_SUSPEND] = "a_suspend",
+		[OTG_STATE_A_PERIPHERAL] = "a_peripheral",
+		[OTG_STATE_A_WAIT_VFALL] = "a_wait_vfall",
+		[OTG_STATE_A_VBUS_ERR] = "a_vbus_err",
+		[OTG_STATE_B_IDLE] = "b_idle",
+		[OTG_STATE_B_SRP_INIT] = "b_srp_init",
+		[OTG_STATE_B_PERIPHERAL] = "b_peripheral",
+		[OTG_STATE_B_WAIT_ACON] = "b_wait_acon",
+		[OTG_STATE_B_HOST] = "b_host",
+	};
+
+	if (state < 0 || state >= ARRAY_SIZE(names))
+		return "UNDEFINED";
+
+	return names[state];
+}
+EXPORT_SYMBOL_GPL(usb_otg_state_string);
+
+static const char *const speed_names[] = {
+	[USB_SPEED_UNKNOWN] = "UNKNOWN",
+	[USB_SPEED_LOW] = "low-speed",
+	[USB_SPEED_FULL] = "full-speed",
+	[USB_SPEED_HIGH] = "high-speed",
+	[USB_SPEED_WIRELESS] = "wireless",
+	[USB_SPEED_SUPER] = "super-speed",
+	[USB_SPEED_SUPER_PLUS] = "super-speed-plus",
+};
+
+static const char *const ssp_rate[] = {
+	[USB_SSP_GEN_UNKNOWN] = "UNKNOWN",
+	[USB_SSP_GEN_2x1] = "super-speed-plus-gen2x1",
+	[USB_SSP_GEN_1x2] = "super-speed-plus-gen1x2",
+	[USB_SSP_GEN_2x2] = "super-speed-plus-gen2x2",
+};
+
+/**
+ * usb_speed_string() - Returns human readable-name of the speed.
+ * @speed: The speed to return human-readable name for.  If it's not
+ *   any of the speeds defined in usb_device_speed enum, string for
+ *   USB_SPEED_UNKNOWN will be returned.
+ */
+const char *usb_speed_string(enum usb_device_speed speed)
+{
+	if (speed < 0 || speed >= ARRAY_SIZE(speed_names))
+		speed = USB_SPEED_UNKNOWN;
+	return speed_names[speed];
+}
+EXPORT_SYMBOL_GPL(usb_speed_string);
+
+/**
+ * usb_get_maximum_speed - Get maximum requested speed for a given USB
+ * controller.
+ * @dev: Pointer to the given USB controller device
+ *
+ * The function gets the maximum speed string from property "maximum-speed",
+ * and returns the corresponding enum usb_device_speed.
+ */
+enum usb_device_speed usb_get_maximum_speed(struct device *dev)
+{
+	const char *maximum_speed;
+	int ret;
+
+	ret = device_property_read_string(dev, "maximum-speed", &maximum_speed);
+	if (ret < 0)
+		return USB_SPEED_UNKNOWN;
+
+	ret = match_string(ssp_rate, ARRAY_SIZE(ssp_rate), maximum_speed);
+	if (ret > 0)
+		return USB_SPEED_SUPER_PLUS;
+
+	ret = match_string(speed_names, ARRAY_SIZE(speed_names), maximum_speed);
+	return (ret < 0) ? USB_SPEED_UNKNOWN : ret;
+}
+EXPORT_SYMBOL_GPL(usb_get_maximum_speed);
+
+/**
+ * usb_get_maximum_ssp_rate - Get the signaling rate generation and lane count
+ *	of a SuperSpeed Plus capable device.
+ * @dev: Pointer to the given USB controller device
+ *
+ * If the string from "maximum-speed" property is super-speed-plus-genXxY where
+ * 'X' is the generation number and 'Y' is the number of lanes, then this
+ * function returns the corresponding enum usb_ssp_rate.
+ */
+enum usb_ssp_rate usb_get_maximum_ssp_rate(struct device *dev)
+{
+	const char *maximum_speed;
+	int ret;
+
+	ret = device_property_read_string(dev, "maximum-speed", &maximum_speed);
+	if (ret < 0)
+		return USB_SSP_GEN_UNKNOWN;
+
+	ret = match_string(ssp_rate, ARRAY_SIZE(ssp_rate), maximum_speed);
+	return (ret < 0) ? USB_SSP_GEN_UNKNOWN : ret;
+}
+EXPORT_SYMBOL_GPL(usb_get_maximum_ssp_rate);
+
+/**
+ * usb_state_string - Returns human readable name for the state.
+ * @state: The state to return a human-readable name for. If it's not
+ *	any of the states devices in usb_device_state_string enum,
+ *	the string UNKNOWN will be returned.
+ */
+const char *usb_state_string(enum usb_device_state state)
+{
+	static const char *const names[] = {
+		[USB_STATE_NOTATTACHED] = "not attached",
+		[USB_STATE_ATTACHED] = "attached",
+		[USB_STATE_POWERED] = "powered",
+		[USB_STATE_RECONNECTING] = "reconnecting",
+		[USB_STATE_UNAUTHENTICATED] = "unauthenticated",
+		[USB_STATE_DEFAULT] = "default",
+		[USB_STATE_ADDRESS] = "addressed",
+		[USB_STATE_CONFIGURED] = "configured",
+		[USB_STATE_SUSPENDED] = "suspended",
+	};
+
+	if (state < 0 || state >= ARRAY_SIZE(names))
+		return "UNKNOWN";
+
+	return names[state];
+}
+EXPORT_SYMBOL_GPL(usb_state_string);
+
+static const char *const usb_dr_modes[] = {
+	[USB_DR_MODE_UNKNOWN]		= "",
+	[USB_DR_MODE_HOST]		= "host",
+	[USB_DR_MODE_PERIPHERAL]	= "peripheral",
+	[USB_DR_MODE_OTG]		= "otg",
+};
+
+static enum usb_dr_mode usb_get_dr_mode_from_string(const char *str)
+{
+	int ret;
+
+	ret = match_string(usb_dr_modes, ARRAY_SIZE(usb_dr_modes), str);
+	return (ret < 0) ? USB_DR_MODE_UNKNOWN : ret;
+}
+
+enum usb_dr_mode usb_get_dr_mode(struct device *dev)
+{
+	const char *dr_mode;
+	int err;
+
+	err = device_property_read_string(dev, "dr_mode", &dr_mode);
+	if (err < 0)
+		return USB_DR_MODE_UNKNOWN;
+
+	return usb_get_dr_mode_from_string(dr_mode);
+}
+EXPORT_SYMBOL_GPL(usb_get_dr_mode);
+
+/**
+ * usb_get_role_switch_default_mode - Get default mode for given device
+ * @dev: Pointer to the given device
+ *
+ * The function gets string from property 'role-switch-default-mode',
+ * and returns the corresponding enum usb_dr_mode.
+ */
+enum usb_dr_mode usb_get_role_switch_default_mode(struct device *dev)
+{
+	const char *str;
+	int ret;
+
+	ret = device_property_read_string(dev, "role-switch-default-mode", &str);
+	if (ret < 0)
+		return USB_DR_MODE_UNKNOWN;
+
+	return usb_get_dr_mode_from_string(str);
+}
+EXPORT_SYMBOL_GPL(usb_get_role_switch_default_mode);
+
+/**
+ * usb_decode_interval - Decode bInterval into the time expressed in 1us unit
+ * @epd: The descriptor of the endpoint
+ * @speed: The speed that the endpoint works as
+ *
+ * Function returns the interval expressed in 1us unit for servicing
+ * endpoint for data transfers.
+ */
+unsigned int usb_decode_interval(const struct usb_endpoint_descriptor *epd,
+				 enum usb_device_speed speed)
+{
+	unsigned int interval = 0;
+
+	switch (usb_endpoint_type(epd)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* uframes per NAK */
+		if (speed == USB_SPEED_HIGH)
+			interval = epd->bInterval;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		interval = 1 << (epd->bInterval - 1);
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		/* uframes per NAK */
+		if (speed == USB_SPEED_HIGH && usb_endpoint_dir_out(epd))
+			interval = epd->bInterval;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		if (speed >= USB_SPEED_HIGH)
+			interval = 1 << (epd->bInterval - 1);
+		else
+			interval = epd->bInterval;
+		break;
+	}
+
+	interval *= (speed >= USB_SPEED_HIGH) ? 125 : 1000;
+
+	return interval;
+}
+EXPORT_SYMBOL_GPL(usb_decode_interval);
+
+#ifdef CONFIG_OF
+/**
+ * of_usb_get_dr_mode_by_phy - Get dual role mode for the controller device
+ * which is associated with the given phy device_node
+ * @np:	Pointer to the given phy device_node
+ * @arg0: phandle args[0] for phy's with #phy-cells >= 1, or -1 for
+ *        phys which do not have phy-cells
+ *
+ * In dts a usb controller associates with phy devices.  The function gets
+ * the string from property 'dr_mode' of the controller associated with the
+ * given phy device node, and returns the correspondig enum usb_dr_mode.
+ */
+enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0)
+{
+	struct device_node *controller = NULL;
+	struct of_phandle_args args;
+	const char *dr_mode;
+	int index;
+	int err;
+
+	do {
+		controller = of_find_node_with_property(controller, "phys");
+		if (!of_device_is_available(controller))
+			continue;
+		index = 0;
+		do {
+			if (arg0 == -1) {
+				args.np = of_parse_phandle(controller, "phys",
+							index);
+				args.args_count = 0;
+			} else {
+				err = of_parse_phandle_with_args(controller,
+							"phys", "#phy-cells",
+							index, &args);
+				if (err)
+					break;
+			}
+
+			of_node_put(args.np);
+			if (args.np == np && (args.args_count == 0 ||
+					      args.args[0] == arg0))
+				goto finish;
+			index++;
+		} while (args.np);
+	} while (controller);
+
+finish:
+	err = of_property_read_string(controller, "dr_mode", &dr_mode);
+	of_node_put(controller);
+
+	if (err < 0)
+		return USB_DR_MODE_UNKNOWN;
+
+	return usb_get_dr_mode_from_string(dr_mode);
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode_by_phy);
+
+/**
+ * of_usb_host_tpl_support - to get if Targeted Peripheral List is supported
+ * for given targeted hosts (non-PC hosts)
+ * @np: Pointer to the given device_node
+ *
+ * The function gets if the targeted hosts support TPL or not
+ */
+bool of_usb_host_tpl_support(struct device_node *np)
+{
+	return of_property_read_bool(np, "tpl-support");
+}
+EXPORT_SYMBOL_GPL(of_usb_host_tpl_support);
+
+/**
+ * of_usb_update_otg_caps - to update usb otg capabilities according to
+ * the passed properties in DT.
+ * @np: Pointer to the given device_node
+ * @otg_caps: Pointer to the target usb_otg_caps to be set
+ *
+ * The function updates the otg capabilities
+ */
+int of_usb_update_otg_caps(struct device_node *np,
+			struct usb_otg_caps *otg_caps)
+{
+	u32 otg_rev;
+
+	if (!otg_caps)
+		return -EINVAL;
+
+	if (!of_property_read_u32(np, "otg-rev", &otg_rev)) {
+		switch (otg_rev) {
+		case 0x0100:
+		case 0x0120:
+		case 0x0130:
+		case 0x0200:
+			/* Choose the lesser one if it's already been set */
+			if (otg_caps->otg_rev)
+				otg_caps->otg_rev = min_t(u16, otg_rev,
+							otg_caps->otg_rev);
+			else
+				otg_caps->otg_rev = otg_rev;
+			break;
+		default:
+			pr_err("%pOF: unsupported otg-rev: 0x%x\n",
+						np, otg_rev);
+			return -EINVAL;
+		}
+	} else {
+		/*
+		 * otg-rev is mandatory for otg properties, if not passed
+		 * we set it to be 0 and assume it's a legacy otg device.
+		 * Non-dt platform can set it afterwards.
+		 */
+		otg_caps->otg_rev = 0;
+	}
+
+	if (of_property_read_bool(np, "hnp-disable"))
+		otg_caps->hnp_support = false;
+	if (of_property_read_bool(np, "srp-disable"))
+		otg_caps->srp_support = false;
+	if (of_property_read_bool(np, "adp-disable") ||
+				(otg_caps->otg_rev < 0x0200))
+		otg_caps->adp_support = false;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(of_usb_update_otg_caps);
+
+/**
+ * usb_of_get_companion_dev - Find the companion device
+ * @dev: the device pointer to find a companion
+ *
+ * Find the companion device from platform bus.
+ *
+ * Takes a reference to the returned struct device which needs to be dropped
+ * after use.
+ *
+ * Return: On success, a pointer to the companion device, %NULL on failure.
+ */
+struct device *usb_of_get_companion_dev(struct device *dev)
+{
+	struct device_node *node;
+	struct platform_device *pdev = NULL;
+
+	node = of_parse_phandle(dev->of_node, "companion", 0);
+	if (node)
+		pdev = of_find_device_by_node(node);
+
+	of_node_put(node);
+
+	return pdev ? &pdev->dev : NULL;
+}
+EXPORT_SYMBOL_GPL(usb_of_get_companion_dev);
+#endif
+
+struct dentry *usb_debug_root;
+EXPORT_SYMBOL_GPL(usb_debug_root);
+
+static int __init usb_common_init(void)
+{
+	usb_debug_root = debugfs_create_dir("usb", NULL);
+	ledtrig_usb_init();
+	return 0;
+}
+
+static void __exit usb_common_exit(void)
+{
+	ledtrig_usb_exit();
+	debugfs_remove_recursive(usb_debug_root);
+}
+
+subsys_initcall(usb_common_init);
+module_exit(usb_common_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/common/common.h b/drivers/usb/common/common.h
new file mode 100644
index 000000000..424a91316
--- /dev/null
+++ b/drivers/usb/common/common.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __LINUX_USB_COMMON_H
+#define __LINUX_USB_COMMON_H
+
+#if defined(CONFIG_USB_LED_TRIG)
+void ledtrig_usb_init(void);
+void ledtrig_usb_exit(void);
+#else
+static inline void ledtrig_usb_init(void) { }
+static inline void ledtrig_usb_exit(void) { }
+#endif
+
+#endif	/* __LINUX_USB_COMMON_H */
diff --git a/drivers/usb/common/debug.c b/drivers/usb/common/debug.c
new file mode 100644
index 000000000..f204cec8d
--- /dev/null
+++ b/drivers/usb/common/debug.c
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common USB debugging functions
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ */
+
+#include <linux/kernel.h>
+#include <linux/usb/ch9.h>
+
+static void usb_decode_get_status(__u8 bRequestType, __u16 wIndex,
+				  __u16 wLength, char *str, size_t size)
+{
+	switch (bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		snprintf(str, size, "Get Device Status(Length = %d)", wLength);
+		break;
+	case USB_RECIP_INTERFACE:
+		snprintf(str, size,
+			 "Get Interface Status(Intf = %d, Length = %d)",
+			 wIndex, wLength);
+		break;
+	case USB_RECIP_ENDPOINT:
+		snprintf(str, size, "Get Endpoint Status(ep%d%s)",
+			 wIndex & ~USB_DIR_IN,
+			 wIndex & USB_DIR_IN ? "in" : "out");
+		break;
+	}
+}
+
+static const char *usb_decode_device_feature(u16 wValue)
+{
+	switch (wValue) {
+	case USB_DEVICE_SELF_POWERED:
+		return "Self Powered";
+	case USB_DEVICE_REMOTE_WAKEUP:
+		return "Remote Wakeup";
+	case USB_DEVICE_TEST_MODE:
+		return "Test Mode";
+	case USB_DEVICE_U1_ENABLE:
+		return "U1 Enable";
+	case USB_DEVICE_U2_ENABLE:
+		return "U2 Enable";
+	case USB_DEVICE_LTM_ENABLE:
+		return "LTM Enable";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static const char *usb_decode_test_mode(u16 wIndex)
+{
+	switch (wIndex) {
+	case USB_TEST_J:
+		return ": TEST_J";
+	case USB_TEST_K:
+		return ": TEST_K";
+	case USB_TEST_SE0_NAK:
+		return ": TEST_SE0_NAK";
+	case USB_TEST_PACKET:
+		return ": TEST_PACKET";
+	case USB_TEST_FORCE_ENABLE:
+		return ": TEST_FORCE_EN";
+	default:
+		return ": UNKNOWN";
+	}
+}
+
+static void usb_decode_set_clear_feature(__u8 bRequestType,
+					 __u8 bRequest, __u16 wValue,
+					 __u16 wIndex, char *str, size_t size)
+{
+	switch (bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		snprintf(str, size, "%s Device Feature(%s%s)",
+			 bRequest == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
+			 usb_decode_device_feature(wValue),
+			 wValue == USB_DEVICE_TEST_MODE ?
+			 usb_decode_test_mode(wIndex) : "");
+		break;
+	case USB_RECIP_INTERFACE:
+		snprintf(str, size, "%s Interface Feature(%s)",
+			 bRequest == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
+			 wValue == USB_INTRF_FUNC_SUSPEND ?
+			 "Function Suspend" : "UNKNOWN");
+		break;
+	case USB_RECIP_ENDPOINT:
+		snprintf(str, size, "%s Endpoint Feature(%s ep%d%s)",
+			 bRequest == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
+			 wValue == USB_ENDPOINT_HALT ? "Halt" : "UNKNOWN",
+			 wIndex & ~USB_DIR_IN,
+			 wIndex & USB_DIR_IN ? "in" : "out");
+		break;
+	}
+}
+
+static void usb_decode_set_address(__u16 wValue, char *str, size_t size)
+{
+	snprintf(str, size, "Set Address(Addr = %02x)", wValue);
+}
+
+static void usb_decode_get_set_descriptor(__u8 bRequestType, __u8 bRequest,
+					  __u16 wValue, __u16 wIndex,
+					  __u16 wLength, char *str, size_t size)
+{
+	char *s;
+
+	switch (wValue >> 8) {
+	case USB_DT_DEVICE:
+		s = "Device";
+		break;
+	case USB_DT_CONFIG:
+		s = "Configuration";
+		break;
+	case USB_DT_STRING:
+		s = "String";
+		break;
+	case USB_DT_INTERFACE:
+		s = "Interface";
+		break;
+	case USB_DT_ENDPOINT:
+		s = "Endpoint";
+		break;
+	case USB_DT_DEVICE_QUALIFIER:
+		s = "Device Qualifier";
+		break;
+	case USB_DT_OTHER_SPEED_CONFIG:
+		s = "Other Speed Config";
+		break;
+	case USB_DT_INTERFACE_POWER:
+		s = "Interface Power";
+		break;
+	case USB_DT_OTG:
+		s = "OTG";
+		break;
+	case USB_DT_DEBUG:
+		s = "Debug";
+		break;
+	case USB_DT_INTERFACE_ASSOCIATION:
+		s = "Interface Association";
+		break;
+	case USB_DT_BOS:
+		s = "BOS";
+		break;
+	case USB_DT_DEVICE_CAPABILITY:
+		s = "Device Capability";
+		break;
+	case USB_DT_PIPE_USAGE:
+		s = "Pipe Usage";
+		break;
+	case USB_DT_SS_ENDPOINT_COMP:
+		s = "SS Endpoint Companion";
+		break;
+	case USB_DT_SSP_ISOC_ENDPOINT_COMP:
+		s = "SSP Isochronous Endpoint Companion";
+		break;
+	default:
+		s = "UNKNOWN";
+		break;
+	}
+
+	snprintf(str, size, "%s %s Descriptor(Index = %d, Length = %d)",
+		bRequest == USB_REQ_GET_DESCRIPTOR ? "Get" : "Set",
+		s, wValue & 0xff, wLength);
+}
+
+static void usb_decode_get_configuration(__u16 wLength, char *str, size_t size)
+{
+	snprintf(str, size, "Get Configuration(Length = %d)", wLength);
+}
+
+static void usb_decode_set_configuration(__u8 wValue, char *str, size_t size)
+{
+	snprintf(str, size, "Set Configuration(Config = %d)", wValue);
+}
+
+static void usb_decode_get_intf(__u16 wIndex, __u16 wLength, char *str,
+				size_t size)
+{
+	snprintf(str, size, "Get Interface(Intf = %d, Length = %d)",
+		 wIndex, wLength);
+}
+
+static void usb_decode_set_intf(__u8 wValue, __u16 wIndex, char *str,
+				size_t size)
+{
+	snprintf(str, size, "Set Interface(Intf = %d, Alt.Setting = %d)",
+		 wIndex, wValue);
+}
+
+static void usb_decode_synch_frame(__u16 wIndex, __u16 wLength,
+				   char *str, size_t size)
+{
+	snprintf(str, size, "Synch Frame(Endpoint = %d, Length = %d)",
+		 wIndex, wLength);
+}
+
+static void usb_decode_set_sel(__u16 wLength, char *str, size_t size)
+{
+	snprintf(str, size, "Set SEL(Length = %d)", wLength);
+}
+
+static void usb_decode_set_isoch_delay(__u8 wValue, char *str, size_t size)
+{
+	snprintf(str, size, "Set Isochronous Delay(Delay = %d ns)", wValue);
+}
+
+static void usb_decode_ctrl_generic(char *str, size_t size, __u8 bRequestType,
+				    __u8 bRequest, __u16 wValue, __u16 wIndex,
+				    __u16 wLength)
+{
+	u8 recip = bRequestType & USB_RECIP_MASK;
+	u8 type = bRequestType & USB_TYPE_MASK;
+
+	snprintf(str, size,
+		 "Type=%s Recipient=%s Dir=%s bRequest=%u wValue=%u wIndex=%u wLength=%u",
+		 (type == USB_TYPE_STANDARD)    ? "Standard" :
+		 (type == USB_TYPE_VENDOR)      ? "Vendor" :
+		 (type == USB_TYPE_CLASS)       ? "Class" : "Unknown",
+		 (recip == USB_RECIP_DEVICE)    ? "Device" :
+		 (recip == USB_RECIP_INTERFACE) ? "Interface" :
+		 (recip == USB_RECIP_ENDPOINT)  ? "Endpoint" : "Unknown",
+		 (bRequestType & USB_DIR_IN)    ? "IN" : "OUT",
+		 bRequest, wValue, wIndex, wLength);
+}
+
+static void usb_decode_ctrl_standard(char *str, size_t size, __u8 bRequestType,
+				     __u8 bRequest, __u16 wValue, __u16 wIndex,
+				     __u16 wLength)
+{
+	switch (bRequest) {
+	case USB_REQ_GET_STATUS:
+		usb_decode_get_status(bRequestType, wIndex, wLength, str, size);
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+	case USB_REQ_SET_FEATURE:
+		usb_decode_set_clear_feature(bRequestType, bRequest, wValue,
+					     wIndex, str, size);
+		break;
+	case USB_REQ_SET_ADDRESS:
+		usb_decode_set_address(wValue, str, size);
+		break;
+	case USB_REQ_GET_DESCRIPTOR:
+	case USB_REQ_SET_DESCRIPTOR:
+		usb_decode_get_set_descriptor(bRequestType, bRequest, wValue,
+					      wIndex, wLength, str, size);
+		break;
+	case USB_REQ_GET_CONFIGURATION:
+		usb_decode_get_configuration(wLength, str, size);
+		break;
+	case USB_REQ_SET_CONFIGURATION:
+		usb_decode_set_configuration(wValue, str, size);
+		break;
+	case USB_REQ_GET_INTERFACE:
+		usb_decode_get_intf(wIndex, wLength, str, size);
+		break;
+	case USB_REQ_SET_INTERFACE:
+		usb_decode_set_intf(wValue, wIndex, str, size);
+		break;
+	case USB_REQ_SYNCH_FRAME:
+		usb_decode_synch_frame(wIndex, wLength, str, size);
+		break;
+	case USB_REQ_SET_SEL:
+		usb_decode_set_sel(wLength, str, size);
+		break;
+	case USB_REQ_SET_ISOCH_DELAY:
+		usb_decode_set_isoch_delay(wValue, str, size);
+		break;
+	default:
+		usb_decode_ctrl_generic(str, size, bRequestType, bRequest,
+					wValue, wIndex, wLength);
+		break;
+	}
+}
+
+/**
+ * usb_decode_ctrl - Returns human readable representation of control request.
+ * @str: buffer to return a human-readable representation of control request.
+ *       This buffer should have about 200 bytes.
+ * @size: size of str buffer.
+ * @bRequestType: matches the USB bmRequestType field
+ * @bRequest: matches the USB bRequest field
+ * @wValue: matches the USB wValue field (CPU byte order)
+ * @wIndex: matches the USB wIndex field (CPU byte order)
+ * @wLength: matches the USB wLength field (CPU byte order)
+ *
+ * Function returns decoded, formatted and human-readable description of
+ * control request packet.
+ *
+ * The usage scenario for this is for tracepoints, so function as a return
+ * use the same value as in parameters. This approach allows to use this
+ * function in TP_printk
+ *
+ * Important: wValue, wIndex, wLength parameters before invoking this function
+ * should be processed by le16_to_cpu macro.
+ */
+const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType,
+			    __u8 bRequest, __u16 wValue, __u16 wIndex,
+			    __u16 wLength)
+{
+	switch (bRequestType & USB_TYPE_MASK) {
+	case USB_TYPE_STANDARD:
+		usb_decode_ctrl_standard(str, size, bRequestType, bRequest,
+					 wValue, wIndex, wLength);
+		break;
+	case USB_TYPE_VENDOR:
+	case USB_TYPE_CLASS:
+	default:
+		usb_decode_ctrl_generic(str, size, bRequestType, bRequest,
+					wValue, wIndex, wLength);
+		break;
+	}
+
+	return str;
+}
+EXPORT_SYMBOL_GPL(usb_decode_ctrl);
diff --git a/drivers/usb/common/led.c b/drivers/usb/common/led.c
new file mode 100644
index 000000000..0865dd44a
--- /dev/null
+++ b/drivers/usb/common/led.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * LED Triggers for USB Activity
+ *
+ * Copyright 2014 Michal Sojka <sojka@merica.cz>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/usb.h>
+#include "common.h"
+
+#define BLINK_DELAY 30
+
+static unsigned long usb_blink_delay = BLINK_DELAY;
+
+DEFINE_LED_TRIGGER(ledtrig_usb_gadget);
+DEFINE_LED_TRIGGER(ledtrig_usb_host);
+
+void usb_led_activity(enum usb_led_event ev)
+{
+	struct led_trigger *trig = NULL;
+
+	switch (ev) {
+	case USB_LED_EVENT_GADGET:
+		trig = ledtrig_usb_gadget;
+		break;
+	case USB_LED_EVENT_HOST:
+		trig = ledtrig_usb_host;
+		break;
+	}
+	/* led_trigger_blink_oneshot() handles trig == NULL gracefully */
+	led_trigger_blink_oneshot(trig, &usb_blink_delay, &usb_blink_delay, 0);
+}
+EXPORT_SYMBOL_GPL(usb_led_activity);
+
+
+void __init ledtrig_usb_init(void)
+{
+	led_trigger_register_simple("usb-gadget", &ledtrig_usb_gadget);
+	led_trigger_register_simple("usb-host", &ledtrig_usb_host);
+}
+
+void __exit ledtrig_usb_exit(void)
+{
+	led_trigger_unregister_simple(ledtrig_usb_gadget);
+	led_trigger_unregister_simple(ledtrig_usb_host);
+}
diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c
new file mode 100644
index 000000000..38703781e
--- /dev/null
+++ b/drivers/usb/common/ulpi.c
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ulpi.c - USB ULPI PHY bus
+ *
+ * Copyright (C) 2015 Intel Corporation
+ *
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/ulpi/interface.h>
+#include <linux/ulpi/driver.h>
+#include <linux/ulpi/regs.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/debugfs.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk/clk-conf.h>
+
+/* -------------------------------------------------------------------------- */
+
+int ulpi_read(struct ulpi *ulpi, u8 addr)
+{
+	return ulpi->ops->read(ulpi->dev.parent, addr);
+}
+EXPORT_SYMBOL_GPL(ulpi_read);
+
+int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val)
+{
+	return ulpi->ops->write(ulpi->dev.parent, addr, val);
+}
+EXPORT_SYMBOL_GPL(ulpi_write);
+
+/* -------------------------------------------------------------------------- */
+
+static int ulpi_match(struct device *dev, struct device_driver *driver)
+{
+	struct ulpi_driver *drv = to_ulpi_driver(driver);
+	struct ulpi *ulpi = to_ulpi_dev(dev);
+	const struct ulpi_device_id *id;
+
+	/*
+	 * Some ULPI devices don't have a vendor id
+	 * or provide an id_table so rely on OF match.
+	 */
+	if (ulpi->id.vendor == 0 || !drv->id_table)
+		return of_driver_match_device(dev, driver);
+
+	for (id = drv->id_table; id->vendor; id++)
+		if (id->vendor == ulpi->id.vendor &&
+		    id->product == ulpi->id.product)
+			return 1;
+
+	return 0;
+}
+
+static int ulpi_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct ulpi *ulpi = to_ulpi_dev(dev);
+	int ret;
+
+	ret = of_device_uevent_modalias(dev, env);
+	if (ret != -ENODEV)
+		return ret;
+
+	if (add_uevent_var(env, "MODALIAS=ulpi:v%04xp%04x",
+			   ulpi->id.vendor, ulpi->id.product))
+		return -ENOMEM;
+	return 0;
+}
+
+static int ulpi_probe(struct device *dev)
+{
+	struct ulpi_driver *drv = to_ulpi_driver(dev->driver);
+	int ret;
+
+	ret = of_clk_set_defaults(dev->of_node, false);
+	if (ret < 0)
+		return ret;
+
+	return drv->probe(to_ulpi_dev(dev));
+}
+
+static void ulpi_remove(struct device *dev)
+{
+	struct ulpi_driver *drv = to_ulpi_driver(dev->driver);
+
+	if (drv->remove)
+		drv->remove(to_ulpi_dev(dev));
+}
+
+static struct bus_type ulpi_bus = {
+	.name = "ulpi",
+	.match = ulpi_match,
+	.uevent = ulpi_uevent,
+	.probe = ulpi_probe,
+	.remove = ulpi_remove,
+};
+
+/* -------------------------------------------------------------------------- */
+
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	int len;
+	struct ulpi *ulpi = to_ulpi_dev(dev);
+
+	len = of_device_modalias(dev, buf, PAGE_SIZE);
+	if (len != -ENODEV)
+		return len;
+
+	return sprintf(buf, "ulpi:v%04xp%04x\n",
+		       ulpi->id.vendor, ulpi->id.product);
+}
+static DEVICE_ATTR_RO(modalias);
+
+static struct attribute *ulpi_dev_attrs[] = {
+	&dev_attr_modalias.attr,
+	NULL
+};
+
+static const struct attribute_group ulpi_dev_attr_group = {
+	.attrs = ulpi_dev_attrs,
+};
+
+static const struct attribute_group *ulpi_dev_attr_groups[] = {
+	&ulpi_dev_attr_group,
+	NULL
+};
+
+static void ulpi_dev_release(struct device *dev)
+{
+	of_node_put(dev->of_node);
+	kfree(to_ulpi_dev(dev));
+}
+
+static const struct device_type ulpi_dev_type = {
+	.name = "ulpi_device",
+	.groups = ulpi_dev_attr_groups,
+	.release = ulpi_dev_release,
+};
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * __ulpi_register_driver - register a driver with the ULPI bus
+ * @drv: driver being registered
+ * @module: ends up being THIS_MODULE
+ *
+ * Registers a driver with the ULPI bus.
+ */
+int __ulpi_register_driver(struct ulpi_driver *drv, struct module *module)
+{
+	if (!drv->probe)
+		return -EINVAL;
+
+	drv->driver.owner = module;
+	drv->driver.bus = &ulpi_bus;
+
+	return driver_register(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(__ulpi_register_driver);
+
+/**
+ * ulpi_unregister_driver - unregister a driver with the ULPI bus
+ * @drv: driver to unregister
+ *
+ * Unregisters a driver with the ULPI bus.
+ */
+void ulpi_unregister_driver(struct ulpi_driver *drv)
+{
+	driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(ulpi_unregister_driver);
+
+/* -------------------------------------------------------------------------- */
+
+static int ulpi_of_register(struct ulpi *ulpi)
+{
+	struct device_node *np = NULL, *child;
+	struct device *parent;
+
+	/* Find a ulpi bus underneath the parent or the grandparent */
+	parent = ulpi->dev.parent;
+	if (parent->of_node)
+		np = of_get_child_by_name(parent->of_node, "ulpi");
+	else if (parent->parent && parent->parent->of_node)
+		np = of_get_child_by_name(parent->parent->of_node, "ulpi");
+	if (!np)
+		return 0;
+
+	child = of_get_next_available_child(np, NULL);
+	of_node_put(np);
+	if (!child)
+		return -EINVAL;
+
+	ulpi->dev.of_node = child;
+
+	return 0;
+}
+
+static int ulpi_read_id(struct ulpi *ulpi)
+{
+	int ret;
+
+	/* Test the interface */
+	ret = ulpi_write(ulpi, ULPI_SCRATCH, 0xaa);
+	if (ret < 0)
+		goto err;
+
+	ret = ulpi_read(ulpi, ULPI_SCRATCH);
+	if (ret < 0)
+		return ret;
+
+	if (ret != 0xaa)
+		goto err;
+
+	ulpi->id.vendor = ulpi_read(ulpi, ULPI_VENDOR_ID_LOW);
+	ulpi->id.vendor |= ulpi_read(ulpi, ULPI_VENDOR_ID_HIGH) << 8;
+
+	ulpi->id.product = ulpi_read(ulpi, ULPI_PRODUCT_ID_LOW);
+	ulpi->id.product |= ulpi_read(ulpi, ULPI_PRODUCT_ID_HIGH) << 8;
+
+	/* Some ULPI devices don't have a vendor id so rely on OF match */
+	if (ulpi->id.vendor == 0)
+		goto err;
+
+	request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product);
+	return 0;
+err:
+	of_device_request_module(&ulpi->dev);
+	return 0;
+}
+
+static int ulpi_regs_show(struct seq_file *seq, void *data)
+{
+	struct ulpi *ulpi = seq->private;
+
+#define ulpi_print(name, reg) do { \
+	int ret = ulpi_read(ulpi, reg); \
+	if (ret < 0) \
+		return ret; \
+	seq_printf(seq, name " %.02x\n", ret); \
+} while (0)
+
+	ulpi_print("Vendor ID Low               ", ULPI_VENDOR_ID_LOW);
+	ulpi_print("Vendor ID High              ", ULPI_VENDOR_ID_HIGH);
+	ulpi_print("Product ID Low              ", ULPI_PRODUCT_ID_LOW);
+	ulpi_print("Product ID High             ", ULPI_PRODUCT_ID_HIGH);
+	ulpi_print("Function Control            ", ULPI_FUNC_CTRL);
+	ulpi_print("Interface Control           ", ULPI_IFC_CTRL);
+	ulpi_print("OTG Control                 ", ULPI_OTG_CTRL);
+	ulpi_print("USB Interrupt Enable Rising ", ULPI_USB_INT_EN_RISE);
+	ulpi_print("USB Interrupt Enable Falling", ULPI_USB_INT_EN_FALL);
+	ulpi_print("USB Interrupt Status        ", ULPI_USB_INT_STS);
+	ulpi_print("USB Interrupt Latch         ", ULPI_USB_INT_LATCH);
+	ulpi_print("Debug                       ", ULPI_DEBUG);
+	ulpi_print("Scratch Register            ", ULPI_SCRATCH);
+	ulpi_print("Carkit Control              ", ULPI_CARKIT_CTRL);
+	ulpi_print("Carkit Interrupt Delay      ", ULPI_CARKIT_INT_DELAY);
+	ulpi_print("Carkit Interrupt Enable     ", ULPI_CARKIT_INT_EN);
+	ulpi_print("Carkit Interrupt Status     ", ULPI_CARKIT_INT_STS);
+	ulpi_print("Carkit Interrupt Latch      ", ULPI_CARKIT_INT_LATCH);
+	ulpi_print("Carkit Pulse Control        ", ULPI_CARKIT_PLS_CTRL);
+	ulpi_print("Transmit Positive Width     ", ULPI_TX_POS_WIDTH);
+	ulpi_print("Transmit Negative Width     ", ULPI_TX_NEG_WIDTH);
+	ulpi_print("Receive Polarity Recovery   ", ULPI_POLARITY_RECOVERY);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(ulpi_regs);
+
+static struct dentry *ulpi_root;
+
+static int ulpi_register(struct device *dev, struct ulpi *ulpi)
+{
+	int ret;
+	struct dentry *root;
+
+	ulpi->dev.parent = dev; /* needed early for ops */
+	ulpi->dev.bus = &ulpi_bus;
+	ulpi->dev.type = &ulpi_dev_type;
+	dev_set_name(&ulpi->dev, "%s.ulpi", dev_name(dev));
+
+	ACPI_COMPANION_SET(&ulpi->dev, ACPI_COMPANION(dev));
+
+	ret = ulpi_of_register(ulpi);
+	if (ret)
+		return ret;
+
+	ret = ulpi_read_id(ulpi);
+	if (ret) {
+		of_node_put(ulpi->dev.of_node);
+		return ret;
+	}
+
+	ret = device_register(&ulpi->dev);
+	if (ret) {
+		put_device(&ulpi->dev);
+		return ret;
+	}
+
+	root = debugfs_create_dir(dev_name(dev), ulpi_root);
+	debugfs_create_file("regs", 0444, root, ulpi, &ulpi_regs_fops);
+
+	dev_dbg(&ulpi->dev, "registered ULPI PHY: vendor %04x, product %04x\n",
+		ulpi->id.vendor, ulpi->id.product);
+
+	return 0;
+}
+
+/**
+ * ulpi_register_interface - instantiate new ULPI device
+ * @dev: USB controller's device interface
+ * @ops: ULPI register access
+ *
+ * Allocates and registers a ULPI device and an interface for it. Called from
+ * the USB controller that provides the ULPI interface.
+ */
+struct ulpi *ulpi_register_interface(struct device *dev,
+				     const struct ulpi_ops *ops)
+{
+	struct ulpi *ulpi;
+	int ret;
+
+	ulpi = kzalloc(sizeof(*ulpi), GFP_KERNEL);
+	if (!ulpi)
+		return ERR_PTR(-ENOMEM);
+
+	ulpi->ops = ops;
+
+	ret = ulpi_register(dev, ulpi);
+	if (ret) {
+		kfree(ulpi);
+		return ERR_PTR(ret);
+	}
+
+	return ulpi;
+}
+EXPORT_SYMBOL_GPL(ulpi_register_interface);
+
+/**
+ * ulpi_unregister_interface - unregister ULPI interface
+ * @ulpi: struct ulpi_interface
+ *
+ * Unregisters a ULPI device and it's interface that was created with
+ * ulpi_create_interface().
+ */
+void ulpi_unregister_interface(struct ulpi *ulpi)
+{
+	debugfs_lookup_and_remove(dev_name(&ulpi->dev), ulpi_root);
+	device_unregister(&ulpi->dev);
+}
+EXPORT_SYMBOL_GPL(ulpi_unregister_interface);
+
+/* -------------------------------------------------------------------------- */
+
+static int __init ulpi_init(void)
+{
+	int ret;
+
+	ulpi_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
+	ret = bus_register(&ulpi_bus);
+	if (ret)
+		debugfs_remove(ulpi_root);
+	return ret;
+}
+subsys_initcall(ulpi_init);
+
+static void __exit ulpi_exit(void)
+{
+	bus_unregister(&ulpi_bus);
+	debugfs_remove(ulpi_root);
+}
+module_exit(ulpi_exit);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("USB ULPI PHY bus");
diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c
new file mode 100644
index 000000000..3f5180d64
--- /dev/null
+++ b/drivers/usb/common/usb-conn-gpio.c
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB GPIO Based Connection Detection Driver
+ *
+ * Copyright (C) 2019 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ *
+ * Some code borrowed from drivers/extcon/extcon-usb-gpio.c
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/role.h>
+
+#define USB_GPIO_DEB_MS		20	/* ms */
+#define USB_GPIO_DEB_US		((USB_GPIO_DEB_MS) * 1000)	/* us */
+
+#define USB_CONN_IRQF	\
+	(IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT)
+
+struct usb_conn_info {
+	struct device *dev;
+	struct usb_role_switch *role_sw;
+	enum usb_role last_role;
+	struct regulator *vbus;
+	struct delayed_work dw_det;
+	unsigned long debounce_jiffies;
+
+	struct gpio_desc *id_gpiod;
+	struct gpio_desc *vbus_gpiod;
+	int id_irq;
+	int vbus_irq;
+
+	struct power_supply_desc desc;
+	struct power_supply *charger;
+	bool initial_detection;
+};
+
+/*
+ * "DEVICE" = VBUS and "HOST" = !ID, so we have:
+ * Both "DEVICE" and "HOST" can't be set as active at the same time
+ * so if "HOST" is active (i.e. ID is 0)  we keep "DEVICE" inactive
+ * even if VBUS is on.
+ *
+ *  Role          |   ID  |  VBUS
+ * ------------------------------------
+ *  [1] DEVICE    |   H   |   H
+ *  [2] NONE      |   H   |   L
+ *  [3] HOST      |   L   |   H
+ *  [4] HOST      |   L   |   L
+ *
+ * In case we have only one of these signals:
+ * - VBUS only - we want to distinguish between [1] and [2], so ID is always 1
+ * - ID only - we want to distinguish between [1] and [4], so VBUS = ID
+ */
+static void usb_conn_detect_cable(struct work_struct *work)
+{
+	struct usb_conn_info *info;
+	enum usb_role role;
+	int id, vbus, ret;
+
+	info = container_of(to_delayed_work(work),
+			    struct usb_conn_info, dw_det);
+
+	/* check ID and VBUS */
+	id = info->id_gpiod ?
+		gpiod_get_value_cansleep(info->id_gpiod) : 1;
+	vbus = info->vbus_gpiod ?
+		gpiod_get_value_cansleep(info->vbus_gpiod) : id;
+
+	if (!id)
+		role = USB_ROLE_HOST;
+	else if (vbus)
+		role = USB_ROLE_DEVICE;
+	else
+		role = USB_ROLE_NONE;
+
+	dev_dbg(info->dev, "role %s -> %s, gpios: id %d, vbus %d\n",
+		usb_role_string(info->last_role), usb_role_string(role), id, vbus);
+
+	if (!info->initial_detection && info->last_role == role) {
+		dev_warn(info->dev, "repeated role: %s\n", usb_role_string(role));
+		return;
+	}
+
+	info->initial_detection = false;
+
+	if (info->last_role == USB_ROLE_HOST && info->vbus)
+		regulator_disable(info->vbus);
+
+	ret = usb_role_switch_set_role(info->role_sw, role);
+	if (ret)
+		dev_err(info->dev, "failed to set role: %d\n", ret);
+
+	if (role == USB_ROLE_HOST && info->vbus) {
+		ret = regulator_enable(info->vbus);
+		if (ret)
+			dev_err(info->dev, "enable vbus regulator failed\n");
+	}
+
+	info->last_role = role;
+
+	if (info->vbus)
+		dev_dbg(info->dev, "vbus regulator is %s\n",
+			regulator_is_enabled(info->vbus) ? "enabled" : "disabled");
+
+	power_supply_changed(info->charger);
+}
+
+static void usb_conn_queue_dwork(struct usb_conn_info *info,
+				 unsigned long delay)
+{
+	queue_delayed_work(system_power_efficient_wq, &info->dw_det, delay);
+}
+
+static irqreturn_t usb_conn_isr(int irq, void *dev_id)
+{
+	struct usb_conn_info *info = dev_id;
+
+	usb_conn_queue_dwork(info, info->debounce_jiffies);
+
+	return IRQ_HANDLED;
+}
+
+static enum power_supply_property usb_charger_properties[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int usb_charger_get_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    union power_supply_propval *val)
+{
+	struct usb_conn_info *info = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = info->last_role == USB_ROLE_DEVICE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int usb_conn_psy_register(struct usb_conn_info *info)
+{
+	struct device *dev = info->dev;
+	struct power_supply_desc *desc = &info->desc;
+	struct power_supply_config cfg = {
+		.of_node = dev->of_node,
+	};
+
+	desc->name = "usb-charger";
+	desc->properties = usb_charger_properties;
+	desc->num_properties = ARRAY_SIZE(usb_charger_properties);
+	desc->get_property = usb_charger_get_property;
+	desc->type = POWER_SUPPLY_TYPE_USB;
+	cfg.drv_data = info;
+
+	info->charger = devm_power_supply_register(dev, desc, &cfg);
+	if (IS_ERR(info->charger))
+		dev_err(dev, "Unable to register charger\n");
+
+	return PTR_ERR_OR_ZERO(info->charger);
+}
+
+static int usb_conn_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_conn_info *info;
+	int ret = 0;
+
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->dev = dev;
+	info->id_gpiod = devm_gpiod_get_optional(dev, "id", GPIOD_IN);
+	if (IS_ERR(info->id_gpiod))
+		return PTR_ERR(info->id_gpiod);
+
+	info->vbus_gpiod = devm_gpiod_get_optional(dev, "vbus", GPIOD_IN);
+	if (IS_ERR(info->vbus_gpiod))
+		return PTR_ERR(info->vbus_gpiod);
+
+	if (!info->id_gpiod && !info->vbus_gpiod) {
+		dev_err(dev, "failed to get gpios\n");
+		return -ENODEV;
+	}
+
+	if (info->id_gpiod)
+		ret = gpiod_set_debounce(info->id_gpiod, USB_GPIO_DEB_US);
+	if (!ret && info->vbus_gpiod)
+		ret = gpiod_set_debounce(info->vbus_gpiod, USB_GPIO_DEB_US);
+	if (ret < 0)
+		info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEB_MS);
+
+	INIT_DELAYED_WORK(&info->dw_det, usb_conn_detect_cable);
+
+	info->vbus = devm_regulator_get_optional(dev, "vbus");
+	if (PTR_ERR(info->vbus) == -ENODEV)
+		info->vbus = NULL;
+
+	if (IS_ERR(info->vbus))
+		return dev_err_probe(dev, PTR_ERR(info->vbus), "failed to get vbus\n");
+
+	info->role_sw = usb_role_switch_get(dev);
+	if (IS_ERR(info->role_sw))
+		return dev_err_probe(dev, PTR_ERR(info->role_sw),
+				     "failed to get role switch\n");
+
+	ret = usb_conn_psy_register(info);
+	if (ret)
+		goto put_role_sw;
+
+	if (info->id_gpiod) {
+		info->id_irq = gpiod_to_irq(info->id_gpiod);
+		if (info->id_irq < 0) {
+			dev_err(dev, "failed to get ID IRQ\n");
+			ret = info->id_irq;
+			goto put_role_sw;
+		}
+
+		ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
+						usb_conn_isr, USB_CONN_IRQF,
+						pdev->name, info);
+		if (ret < 0) {
+			dev_err(dev, "failed to request ID IRQ\n");
+			goto put_role_sw;
+		}
+	}
+
+	if (info->vbus_gpiod) {
+		info->vbus_irq = gpiod_to_irq(info->vbus_gpiod);
+		if (info->vbus_irq < 0) {
+			dev_err(dev, "failed to get VBUS IRQ\n");
+			ret = info->vbus_irq;
+			goto put_role_sw;
+		}
+
+		ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL,
+						usb_conn_isr, USB_CONN_IRQF,
+						pdev->name, info);
+		if (ret < 0) {
+			dev_err(dev, "failed to request VBUS IRQ\n");
+			goto put_role_sw;
+		}
+	}
+
+	platform_set_drvdata(pdev, info);
+	device_set_wakeup_capable(&pdev->dev, true);
+
+	/* Perform initial detection */
+	info->initial_detection = true;
+	usb_conn_queue_dwork(info, 0);
+
+	return 0;
+
+put_role_sw:
+	usb_role_switch_put(info->role_sw);
+	return ret;
+}
+
+static int usb_conn_remove(struct platform_device *pdev)
+{
+	struct usb_conn_info *info = platform_get_drvdata(pdev);
+
+	cancel_delayed_work_sync(&info->dw_det);
+
+	if (info->last_role == USB_ROLE_HOST && info->vbus)
+		regulator_disable(info->vbus);
+
+	usb_role_switch_put(info->role_sw);
+
+	return 0;
+}
+
+static int __maybe_unused usb_conn_suspend(struct device *dev)
+{
+	struct usb_conn_info *info = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev)) {
+		if (info->id_gpiod)
+			enable_irq_wake(info->id_irq);
+		if (info->vbus_gpiod)
+			enable_irq_wake(info->vbus_irq);
+		return 0;
+	}
+
+	if (info->id_gpiod)
+		disable_irq(info->id_irq);
+	if (info->vbus_gpiod)
+		disable_irq(info->vbus_irq);
+
+	pinctrl_pm_select_sleep_state(dev);
+
+	return 0;
+}
+
+static int __maybe_unused usb_conn_resume(struct device *dev)
+{
+	struct usb_conn_info *info = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev)) {
+		if (info->id_gpiod)
+			disable_irq_wake(info->id_irq);
+		if (info->vbus_gpiod)
+			disable_irq_wake(info->vbus_irq);
+		return 0;
+	}
+
+	pinctrl_pm_select_default_state(dev);
+
+	if (info->id_gpiod)
+		enable_irq(info->id_irq);
+	if (info->vbus_gpiod)
+		enable_irq(info->vbus_irq);
+
+	usb_conn_queue_dwork(info, 0);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(usb_conn_pm_ops,
+			 usb_conn_suspend, usb_conn_resume);
+
+static const struct of_device_id usb_conn_dt_match[] = {
+	{ .compatible = "gpio-usb-b-connector", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, usb_conn_dt_match);
+
+static struct platform_driver usb_conn_driver = {
+	.probe		= usb_conn_probe,
+	.remove		= usb_conn_remove,
+	.driver		= {
+		.name	= "usb-conn-gpio",
+		.pm	= &usb_conn_pm_ops,
+		.of_match_table = usb_conn_dt_match,
+	},
+};
+
+module_platform_driver(usb_conn_driver);
+
+MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
+MODULE_DESCRIPTION("USB GPIO based connection detection driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c
new file mode 100644
index 000000000..0697fde51
--- /dev/null
+++ b/drivers/usb/common/usb-otg-fsm.c
@@ -0,0 +1,452 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * OTG Finite State Machine from OTG spec
+ *
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc.
+ *
+ * Author:	Li Yang <LeoLi@freescale.com>
+ *		Jerry Huang <Chang-Ming.Huang@freescale.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/usb.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/otg-fsm.h>
+
+#ifdef VERBOSE
+#define VDBG(fmt, args...) pr_debug("[%s]  " fmt, \
+				 __func__, ## args)
+#else
+#define VDBG(stuff...)	do {} while (0)
+#endif
+
+/* Change USB protocol when there is a protocol change */
+static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
+{
+	int ret = 0;
+
+	if (fsm->protocol != protocol) {
+		VDBG("Changing role fsm->protocol= %d; new protocol= %d\n",
+			fsm->protocol, protocol);
+		/* stop old protocol */
+		if (fsm->protocol == PROTO_HOST)
+			ret = otg_start_host(fsm, 0);
+		else if (fsm->protocol == PROTO_GADGET)
+			ret = otg_start_gadget(fsm, 0);
+		if (ret)
+			return ret;
+
+		/* start new protocol */
+		if (protocol == PROTO_HOST)
+			ret = otg_start_host(fsm, 1);
+		else if (protocol == PROTO_GADGET)
+			ret = otg_start_gadget(fsm, 1);
+		if (ret)
+			return ret;
+
+		fsm->protocol = protocol;
+		return 0;
+	}
+
+	return 0;
+}
+
+/* Called when leaving a state.  Do state clean up jobs here */
+static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
+{
+	switch (old_state) {
+	case OTG_STATE_B_IDLE:
+		otg_del_timer(fsm, B_SE0_SRP);
+		fsm->b_se0_srp = 0;
+		fsm->adp_sns = 0;
+		fsm->adp_prb = 0;
+		break;
+	case OTG_STATE_B_SRP_INIT:
+		fsm->data_pulse = 0;
+		fsm->b_srp_done = 0;
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		if (fsm->otg->gadget)
+			fsm->otg->gadget->host_request_flag = 0;
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+		otg_del_timer(fsm, B_ASE0_BRST);
+		fsm->b_ase0_brst_tmout = 0;
+		break;
+	case OTG_STATE_B_HOST:
+		break;
+	case OTG_STATE_A_IDLE:
+		fsm->adp_prb = 0;
+		break;
+	case OTG_STATE_A_WAIT_VRISE:
+		otg_del_timer(fsm, A_WAIT_VRISE);
+		fsm->a_wait_vrise_tmout = 0;
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		otg_del_timer(fsm, A_WAIT_BCON);
+		fsm->a_wait_bcon_tmout = 0;
+		break;
+	case OTG_STATE_A_HOST:
+		otg_del_timer(fsm, A_WAIT_ENUM);
+		break;
+	case OTG_STATE_A_SUSPEND:
+		otg_del_timer(fsm, A_AIDL_BDIS);
+		fsm->a_aidl_bdis_tmout = 0;
+		fsm->a_suspend_req_inf = 0;
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		otg_del_timer(fsm, A_BIDL_ADIS);
+		fsm->a_bidl_adis_tmout = 0;
+		if (fsm->otg->gadget)
+			fsm->otg->gadget->host_request_flag = 0;
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		otg_del_timer(fsm, A_WAIT_VFALL);
+		fsm->a_wait_vfall_tmout = 0;
+		otg_del_timer(fsm, A_WAIT_VRISE);
+		break;
+	case OTG_STATE_A_VBUS_ERR:
+		break;
+	default:
+		break;
+	}
+}
+
+static void otg_hnp_polling_work(struct work_struct *work)
+{
+	struct otg_fsm *fsm = container_of(to_delayed_work(work),
+				struct otg_fsm, hnp_polling_work);
+	struct usb_device *udev;
+	enum usb_otg_state state = fsm->otg->state;
+	u8 flag;
+	int retval;
+
+	if (state != OTG_STATE_A_HOST && state != OTG_STATE_B_HOST)
+		return;
+
+	udev = usb_hub_find_child(fsm->otg->host->root_hub, 1);
+	if (!udev) {
+		dev_err(fsm->otg->host->controller,
+			"no usb dev connected, can't start HNP polling\n");
+		return;
+	}
+
+	*fsm->host_req_flag = 0;
+	/* Get host request flag from connected USB device */
+	retval = usb_control_msg(udev,
+				usb_rcvctrlpipe(udev, 0),
+				USB_REQ_GET_STATUS,
+				USB_DIR_IN | USB_RECIP_DEVICE,
+				0,
+				OTG_STS_SELECTOR,
+				fsm->host_req_flag,
+				1,
+				USB_CTRL_GET_TIMEOUT);
+	if (retval != 1) {
+		dev_err(&udev->dev, "Get one byte OTG status failed\n");
+		return;
+	}
+
+	flag = *fsm->host_req_flag;
+	if (flag == 0) {
+		/* Continue HNP polling */
+		schedule_delayed_work(&fsm->hnp_polling_work,
+					msecs_to_jiffies(T_HOST_REQ_POLL));
+		return;
+	} else if (flag != HOST_REQUEST_FLAG) {
+		dev_err(&udev->dev, "host request flag %d is invalid\n", flag);
+		return;
+	}
+
+	/* Host request flag is set */
+	if (state == OTG_STATE_A_HOST) {
+		/* Set b_hnp_enable */
+		if (!fsm->otg->host->b_hnp_enable) {
+			retval = usb_control_msg(udev,
+					usb_sndctrlpipe(udev, 0),
+					USB_REQ_SET_FEATURE, 0,
+					USB_DEVICE_B_HNP_ENABLE,
+					0, NULL, 0,
+					USB_CTRL_SET_TIMEOUT);
+			if (retval >= 0)
+				fsm->otg->host->b_hnp_enable = 1;
+		}
+		fsm->a_bus_req = 0;
+	} else if (state == OTG_STATE_B_HOST) {
+		fsm->b_bus_req = 0;
+	}
+
+	otg_statemachine(fsm);
+}
+
+static void otg_start_hnp_polling(struct otg_fsm *fsm)
+{
+	/*
+	 * The memory of host_req_flag should be allocated by
+	 * controller driver, otherwise, hnp polling is not started.
+	 */
+	if (!fsm->host_req_flag)
+		return;
+
+	if (!fsm->hnp_work_inited) {
+		INIT_DELAYED_WORK(&fsm->hnp_polling_work, otg_hnp_polling_work);
+		fsm->hnp_work_inited = true;
+	}
+
+	schedule_delayed_work(&fsm->hnp_polling_work,
+					msecs_to_jiffies(T_HOST_REQ_POLL));
+}
+
+/* Called when entering a state */
+static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
+{
+	if (fsm->otg->state == new_state)
+		return 0;
+	VDBG("Set state: %s\n", usb_otg_state_string(new_state));
+	otg_leave_state(fsm, fsm->otg->state);
+	switch (new_state) {
+	case OTG_STATE_B_IDLE:
+		otg_drv_vbus(fsm, 0);
+		otg_chrg_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		/*
+		 * Driver is responsible for starting ADP probing
+		 * if ADP sensing times out.
+		 */
+		otg_start_adp_sns(fsm);
+		otg_set_protocol(fsm, PROTO_UNDEF);
+		otg_add_timer(fsm, B_SE0_SRP);
+		break;
+	case OTG_STATE_B_SRP_INIT:
+		otg_start_pulse(fsm);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_UNDEF);
+		otg_add_timer(fsm, B_SRP_FAIL);
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		otg_chrg_vbus(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_GADGET);
+		otg_loc_conn(fsm, 1);
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+		otg_chrg_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_HOST);
+		otg_add_timer(fsm, B_ASE0_BRST);
+		fsm->a_bus_suspend = 0;
+		break;
+	case OTG_STATE_B_HOST:
+		otg_chrg_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 1);
+		otg_set_protocol(fsm, PROTO_HOST);
+		usb_bus_start_enum(fsm->otg->host,
+				fsm->otg->host->otg_port);
+		otg_start_hnp_polling(fsm);
+		break;
+	case OTG_STATE_A_IDLE:
+		otg_drv_vbus(fsm, 0);
+		otg_chrg_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_start_adp_prb(fsm);
+		otg_set_protocol(fsm, PROTO_HOST);
+		break;
+	case OTG_STATE_A_WAIT_VRISE:
+		otg_drv_vbus(fsm, 1);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_HOST);
+		otg_add_timer(fsm, A_WAIT_VRISE);
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		otg_drv_vbus(fsm, 1);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_HOST);
+		otg_add_timer(fsm, A_WAIT_BCON);
+		break;
+	case OTG_STATE_A_HOST:
+		otg_drv_vbus(fsm, 1);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 1);
+		otg_set_protocol(fsm, PROTO_HOST);
+		/*
+		 * When HNP is triggered while a_bus_req = 0, a_host will
+		 * suspend too fast to complete a_set_b_hnp_en
+		 */
+		if (!fsm->a_bus_req || fsm->a_suspend_req_inf)
+			otg_add_timer(fsm, A_WAIT_ENUM);
+		otg_start_hnp_polling(fsm);
+		break;
+	case OTG_STATE_A_SUSPEND:
+		otg_drv_vbus(fsm, 1);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_HOST);
+		otg_add_timer(fsm, A_AIDL_BDIS);
+
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_GADGET);
+		otg_drv_vbus(fsm, 1);
+		otg_loc_conn(fsm, 1);
+		otg_add_timer(fsm, A_BIDL_ADIS);
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		otg_drv_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_HOST);
+		otg_add_timer(fsm, A_WAIT_VFALL);
+		break;
+	case OTG_STATE_A_VBUS_ERR:
+		otg_drv_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_UNDEF);
+		break;
+	default:
+		break;
+	}
+
+	fsm->otg->state = new_state;
+	fsm->state_changed = 1;
+	return 0;
+}
+
+/* State change judgement */
+int otg_statemachine(struct otg_fsm *fsm)
+{
+	enum usb_otg_state state;
+
+	mutex_lock(&fsm->lock);
+
+	state = fsm->otg->state;
+	fsm->state_changed = 0;
+	/* State machine state change judgement */
+
+	switch (state) {
+	case OTG_STATE_UNDEFINED:
+		VDBG("fsm->id = %d\n", fsm->id);
+		if (fsm->id)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		else
+			otg_set_state(fsm, OTG_STATE_A_IDLE);
+		break;
+	case OTG_STATE_B_IDLE:
+		if (!fsm->id)
+			otg_set_state(fsm, OTG_STATE_A_IDLE);
+		else if (fsm->b_sess_vld && fsm->otg->gadget)
+			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
+		else if ((fsm->b_bus_req || fsm->adp_change || fsm->power_up) &&
+				fsm->b_ssend_srp && fsm->b_se0_srp)
+			otg_set_state(fsm, OTG_STATE_B_SRP_INIT);
+		break;
+	case OTG_STATE_B_SRP_INIT:
+		if (!fsm->id || fsm->b_srp_done)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		if (!fsm->id || !fsm->b_sess_vld)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		else if (fsm->b_bus_req && fsm->otg->
+				gadget->b_hnp_enable && fsm->a_bus_suspend)
+			otg_set_state(fsm, OTG_STATE_B_WAIT_ACON);
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+		if (fsm->a_conn)
+			otg_set_state(fsm, OTG_STATE_B_HOST);
+		else if (!fsm->id || !fsm->b_sess_vld)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		else if (fsm->a_bus_resume || fsm->b_ase0_brst_tmout) {
+			fsm->b_ase0_brst_tmout = 0;
+			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
+		}
+		break;
+	case OTG_STATE_B_HOST:
+		if (!fsm->id || !fsm->b_sess_vld)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		else if (!fsm->b_bus_req || !fsm->a_conn || fsm->test_device)
+			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
+		break;
+	case OTG_STATE_A_IDLE:
+		if (fsm->id)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		else if (!fsm->a_bus_drop && (fsm->a_bus_req ||
+			  fsm->a_srp_det || fsm->adp_change || fsm->power_up))
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE);
+		break;
+	case OTG_STATE_A_WAIT_VRISE:
+		if (fsm->a_vbus_vld)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
+		else if (fsm->id || fsm->a_bus_drop ||
+				fsm->a_wait_vrise_tmout)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		if (!fsm->a_vbus_vld)
+			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
+		else if (fsm->b_conn)
+			otg_set_state(fsm, OTG_STATE_A_HOST);
+		else if (fsm->id || fsm->a_bus_drop || fsm->a_wait_bcon_tmout)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		break;
+	case OTG_STATE_A_HOST:
+		if (fsm->id || fsm->a_bus_drop)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		else if ((!fsm->a_bus_req || fsm->a_suspend_req_inf) &&
+				fsm->otg->host->b_hnp_enable)
+			otg_set_state(fsm, OTG_STATE_A_SUSPEND);
+		else if (!fsm->b_conn)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
+		else if (!fsm->a_vbus_vld)
+			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
+		break;
+	case OTG_STATE_A_SUSPEND:
+		if (!fsm->b_conn && fsm->otg->host->b_hnp_enable)
+			otg_set_state(fsm, OTG_STATE_A_PERIPHERAL);
+		else if (!fsm->b_conn && !fsm->otg->host->b_hnp_enable)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
+		else if (fsm->a_bus_req || fsm->b_bus_resume)
+			otg_set_state(fsm, OTG_STATE_A_HOST);
+		else if (fsm->id || fsm->a_bus_drop || fsm->a_aidl_bdis_tmout)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		else if (!fsm->a_vbus_vld)
+			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		if (fsm->id || fsm->a_bus_drop)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		else if (fsm->a_bidl_adis_tmout || fsm->b_bus_suspend)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
+		else if (!fsm->a_vbus_vld)
+			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		if (fsm->a_wait_vfall_tmout)
+			otg_set_state(fsm, OTG_STATE_A_IDLE);
+		break;
+	case OTG_STATE_A_VBUS_ERR:
+		if (fsm->id || fsm->a_bus_drop || fsm->a_clr_err)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		break;
+	default:
+		break;
+	}
+	mutex_unlock(&fsm->lock);
+
+	VDBG("quit statemachine, changed = %d\n", fsm->state_changed);
+	return fsm->state_changed;
+}
+EXPORT_SYMBOL_GPL(otg_statemachine);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
new file mode 100644
index 000000000..351ede4b5
--- /dev/null
+++ b/drivers/usb/core/Kconfig
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Core configuration
+#
+config USB_ANNOUNCE_NEW_DEVICES
+	bool "USB announce new devices"
+	help
+	  Say Y here if you want the USB core to always announce the
+	  idVendor, idProduct, Manufacturer, Product, and SerialNumber
+	  strings for every new USB device to the syslog.  This option is
+	  usually used by distro vendors to help with debugging and to
+	  let users know what specific device was added to the machine
+	  in what location.
+
+	  If you do not want this kind of information sent to the system
+	  log, or have any doubts about this, say N here.
+
+comment "Miscellaneous USB options"
+
+config USB_DEFAULT_PERSIST
+	bool "Enable USB persist by default"
+	default y
+	help
+	  Say N here if you don't want USB power session persistence
+	  enabled by default.  If you say N it will make suspended USB
+	  devices that lose power get reenumerated as if they had been
+	  unplugged, causing any mounted filesystems to be lost.  The
+	  persist feature can still be enabled for individual devices
+	  through the power/persist sysfs node. See
+	  Documentation/driver-api/usb/persist.rst for more info.
+
+	  If you have any questions about this, say Y here, only say N
+	  if you know exactly what you are doing.
+
+config USB_FEW_INIT_RETRIES
+	bool "Limit USB device initialization to only a few retries"
+	help
+	  When a new USB device is detected, the kernel tries very hard
+	  to initialize and enumerate it, with lots of nested retry loops.
+	  This almost always works, but when it fails it can take a long time.
+	  This option tells the kernel to make only a few retry attempts,
+	  so that the total time required for a failed initialization is
+	  no more than 30 seconds (as required by the USB OTG spec).
+
+	  Say N here unless you require new-device enumeration failure to
+	  occur within 30 seconds (as might be needed in an embedded
+	  application).
+
+config USB_DYNAMIC_MINORS
+	bool "Dynamic USB minor allocation"
+	help
+	  If you say Y here, the USB subsystem will use dynamic minor
+	  allocation for any device that uses the USB major number.
+	  This means that you can have more than 16 of a single type
+	  of device (like USB printers).
+
+	  If you are unsure about this, say N here.
+
+config USB_OTG
+	bool "OTG support"
+	depends on PM
+	help
+	  The most notable feature of USB OTG is support for a
+	  "Dual-Role" device, which can act as either a device
+	  or a host. The initial role is decided by the type of
+	  plug inserted and can be changed later when two dual
+	  role devices talk to each other.
+
+	  Select this only if your board has Mini-AB/Micro-AB
+	  connector.
+
+config USB_OTG_PRODUCTLIST
+	bool "Rely on OTG and EH Targeted Peripherals List"
+	depends on USB
+	help
+	  If you say Y here, the "otg_productlist.h" file will be used as a
+	  product list, so USB peripherals not listed there will be
+	  rejected during enumeration.  This behavior is required by the
+	  USB OTG and EH specification for all devices not on your product's
+	  "Targeted Peripherals List".  "Embedded Hosts" are likewise
+	  allowed to support only a limited number of peripherals.
+
+config USB_OTG_DISABLE_EXTERNAL_HUB
+	bool "Disable external hubs"
+	depends on USB_OTG || EXPERT
+	help
+	  If you say Y here, then Linux will refuse to enumerate
+	  external hubs.  OTG hosts are allowed to reduce hardware
+	  and software costs by not supporting external hubs.  So
+	  are "Embedded Hosts" that don't offer OTG support.
+
+config USB_OTG_FSM
+	tristate "USB 2.0 OTG FSM implementation"
+	depends on USB && USB_OTG
+	select USB_PHY
+	help
+	  Implements OTG Finite State Machine as specified in On-The-Go
+	  and Embedded Host Supplement to the USB Revision 2.0 Specification.
+
+config USB_LEDS_TRIGGER_USBPORT
+	tristate "USB port LED trigger"
+	depends on USB && LEDS_TRIGGERS
+	help
+	  This driver allows LEDs to be controlled by USB events. Enabling this
+	  trigger allows specifying list of USB ports that should turn on LED
+	  when some USB device gets connected.
+
+config USB_AUTOSUSPEND_DELAY
+	int "Default autosuspend delay"
+	depends on USB
+	default 2
+	help
+	  The default autosuspend delay in seconds.  Can be overridden
+	  with the usbcore.autosuspend command line or module parameter.
+
+	  The default value Linux has always had is 2 seconds.  Change
+	  this value if you want a different delay and cannot modify
+	  the command line or module parameter.
diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
new file mode 100644
index 000000000..7d338e9c0
--- /dev/null
+++ b/drivers/usb/core/Makefile
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for USB Core files and filesystem
+#
+
+usbcore-y := usb.o hub.o hcd.o urb.o message.o driver.o
+usbcore-y += config.o file.o buffer.o sysfs.o endpoint.o
+usbcore-y += devio.o notify.o generic.o quirks.o devices.o
+usbcore-y += phy.o port.o
+
+usbcore-$(CONFIG_OF)		+= of.o
+usbcore-$(CONFIG_USB_PCI)		+= hcd-pci.o
+usbcore-$(CONFIG_ACPI)		+= usb-acpi.o
+
+ifdef CONFIG_USB_ONBOARD_HUB
+usbcore-y			+= ../misc/onboard_usb_hub_pdevs.o
+endif
+
+obj-$(CONFIG_USB)		+= usbcore.o
+
+obj-$(CONFIG_USB_LEDS_TRIGGER_USBPORT)	+= ledtrig-usbport.o
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
new file mode 100644
index 000000000..268ccbec8
--- /dev/null
+++ b/drivers/usb/core/buffer.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DMA memory management for framework level HCD code (hc_driver)
+ *
+ * This implementation plugs in through generic "usb_bus" level methods,
+ * and should work with all USB controllers, regardless of bus type.
+ *
+ * Released under the GPLv2 only.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/genalloc.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+
+/*
+ * DMA-Coherent Buffers
+ */
+
+/* FIXME tune these based on pool statistics ... */
+static size_t pool_max[HCD_BUFFER_POOLS] = {
+	32, 128, 512, 2048,
+};
+
+void __init usb_init_pool_max(void)
+{
+	/*
+	 * The pool_max values must never be smaller than
+	 * ARCH_KMALLOC_MINALIGN.
+	 */
+	if (ARCH_KMALLOC_MINALIGN <= 32)
+		;			/* Original value is okay */
+	else if (ARCH_KMALLOC_MINALIGN <= 64)
+		pool_max[0] = 64;
+	else if (ARCH_KMALLOC_MINALIGN <= 128)
+		pool_max[0] = 0;	/* Don't use this pool */
+	else
+		BUILD_BUG();		/* We don't allow this */
+}
+
+/* SETUP primitives */
+
+/**
+ * hcd_buffer_create - initialize buffer pools
+ * @hcd: the bus whose buffer pools are to be initialized
+ *
+ * Context: task context, might sleep
+ *
+ * Call this as part of initializing a host controller that uses the dma
+ * memory allocators.  It initializes some pools of dma-coherent memory that
+ * will be shared by all drivers using that controller.
+ *
+ * Call hcd_buffer_destroy() to clean up after using those pools.
+ *
+ * Return: 0 if successful. A negative errno value otherwise.
+ */
+int hcd_buffer_create(struct usb_hcd *hcd)
+{
+	char		name[16];
+	int		i, size;
+
+	if (hcd->localmem_pool || !hcd_uses_dma(hcd))
+		return 0;
+
+	for (i = 0; i < HCD_BUFFER_POOLS; i++) {
+		size = pool_max[i];
+		if (!size)
+			continue;
+		snprintf(name, sizeof(name), "buffer-%d", size);
+		hcd->pool[i] = dma_pool_create(name, hcd->self.sysdev,
+				size, size, 0);
+		if (!hcd->pool[i]) {
+			hcd_buffer_destroy(hcd);
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+
+/**
+ * hcd_buffer_destroy - deallocate buffer pools
+ * @hcd: the bus whose buffer pools are to be destroyed
+ *
+ * Context: task context, might sleep
+ *
+ * This frees the buffer pools created by hcd_buffer_create().
+ */
+void hcd_buffer_destroy(struct usb_hcd *hcd)
+{
+	int i;
+
+	if (!IS_ENABLED(CONFIG_HAS_DMA))
+		return;
+
+	for (i = 0; i < HCD_BUFFER_POOLS; i++) {
+		dma_pool_destroy(hcd->pool[i]);
+		hcd->pool[i] = NULL;
+	}
+}
+
+
+/* sometimes alloc/free could use kmalloc with GFP_DMA, for
+ * better sharing and to leverage mm/slab.c intelligence.
+ */
+
+void *hcd_buffer_alloc(
+	struct usb_bus		*bus,
+	size_t			size,
+	gfp_t			mem_flags,
+	dma_addr_t		*dma
+)
+{
+	struct usb_hcd		*hcd = bus_to_hcd(bus);
+	int			i;
+
+	if (size == 0)
+		return NULL;
+
+	if (hcd->localmem_pool)
+		return gen_pool_dma_alloc(hcd->localmem_pool, size, dma);
+
+	/* some USB hosts just use PIO */
+	if (!hcd_uses_dma(hcd)) {
+		*dma = ~(dma_addr_t) 0;
+		return kmalloc(size, mem_flags);
+	}
+
+	for (i = 0; i < HCD_BUFFER_POOLS; i++) {
+		if (size <= pool_max[i])
+			return dma_pool_alloc(hcd->pool[i], mem_flags, dma);
+	}
+	return dma_alloc_coherent(hcd->self.sysdev, size, dma, mem_flags);
+}
+
+void hcd_buffer_free(
+	struct usb_bus		*bus,
+	size_t			size,
+	void			*addr,
+	dma_addr_t		dma
+)
+{
+	struct usb_hcd		*hcd = bus_to_hcd(bus);
+	int			i;
+
+	if (!addr)
+		return;
+
+	if (hcd->localmem_pool) {
+		gen_pool_free(hcd->localmem_pool, (unsigned long)addr, size);
+		return;
+	}
+
+	if (!hcd_uses_dma(hcd)) {
+		kfree(addr);
+		return;
+	}
+
+	for (i = 0; i < HCD_BUFFER_POOLS; i++) {
+		if (size <= pool_max[i]) {
+			dma_pool_free(hcd->pool[i], addr, dma);
+			return;
+		}
+	}
+	dma_free_coherent(hcd->self.sysdev, size, addr, dma);
+}
+
+void *hcd_buffer_alloc_pages(struct usb_hcd *hcd,
+		size_t size, gfp_t mem_flags, dma_addr_t *dma)
+{
+	if (size == 0)
+		return NULL;
+
+	if (hcd->localmem_pool)
+		return gen_pool_dma_alloc_align(hcd->localmem_pool,
+				size, dma, PAGE_SIZE);
+
+	/* some USB hosts just use PIO */
+	if (!hcd_uses_dma(hcd)) {
+		*dma = DMA_MAPPING_ERROR;
+		return (void *)__get_free_pages(mem_flags,
+				get_order(size));
+	}
+
+	return dma_alloc_coherent(hcd->self.sysdev,
+			size, dma, mem_flags);
+}
+
+void hcd_buffer_free_pages(struct usb_hcd *hcd,
+		size_t size, void *addr, dma_addr_t dma)
+{
+	if (!addr)
+		return;
+
+	if (hcd->localmem_pool) {
+		gen_pool_free(hcd->localmem_pool,
+				(unsigned long)addr, size);
+		return;
+	}
+
+	if (!hcd_uses_dma(hcd)) {
+		free_pages((unsigned long)addr, get_order(size));
+		return;
+	}
+
+	dma_free_coherent(hcd->self.sysdev, size, addr, dma);
+}
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
new file mode 100644
index 000000000..d396ac8b9
--- /dev/null
+++ b/drivers/usb/core/config.c
@@ -0,0 +1,1095 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Released under the GPLv2 only.
+ */
+
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/quirks.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <asm/byteorder.h>
+#include "usb.h"
+
+
+#define USB_MAXALTSETTING		128	/* Hard limit */
+
+#define USB_MAXCONFIG			8	/* Arbitrary limit */
+
+
+static inline const char *plural(int n)
+{
+	return (n == 1 ? "" : "s");
+}
+
+static int find_next_descriptor(unsigned char *buffer, int size,
+    int dt1, int dt2, int *num_skipped)
+{
+	struct usb_descriptor_header *h;
+	int n = 0;
+	unsigned char *buffer0 = buffer;
+
+	/* Find the next descriptor of type dt1 or dt2 */
+	while (size > 0) {
+		h = (struct usb_descriptor_header *) buffer;
+		if (h->bDescriptorType == dt1 || h->bDescriptorType == dt2)
+			break;
+		buffer += h->bLength;
+		size -= h->bLength;
+		++n;
+	}
+
+	/* Store the number of descriptors skipped and return the
+	 * number of bytes skipped */
+	if (num_skipped)
+		*num_skipped = n;
+	return buffer - buffer0;
+}
+
+static void usb_parse_ssp_isoc_endpoint_companion(struct device *ddev,
+		int cfgno, int inum, int asnum, struct usb_host_endpoint *ep,
+		unsigned char *buffer, int size)
+{
+	struct usb_ssp_isoc_ep_comp_descriptor *desc;
+
+	/*
+	 * The SuperSpeedPlus Isoc endpoint companion descriptor immediately
+	 * follows the SuperSpeed Endpoint Companion descriptor
+	 */
+	desc = (struct usb_ssp_isoc_ep_comp_descriptor *) buffer;
+	if (desc->bDescriptorType != USB_DT_SSP_ISOC_ENDPOINT_COMP ||
+	    size < USB_DT_SSP_ISOC_EP_COMP_SIZE) {
+		dev_notice(ddev, "Invalid SuperSpeedPlus isoc endpoint companion"
+			 "for config %d interface %d altsetting %d ep %d.\n",
+			 cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		return;
+	}
+	memcpy(&ep->ssp_isoc_ep_comp, desc, USB_DT_SSP_ISOC_EP_COMP_SIZE);
+}
+
+static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
+		int inum, int asnum, struct usb_host_endpoint *ep,
+		unsigned char *buffer, int size)
+{
+	struct usb_ss_ep_comp_descriptor *desc;
+	int max_tx;
+
+	/* The SuperSpeed endpoint companion descriptor is supposed to
+	 * be the first thing immediately following the endpoint descriptor.
+	 */
+	desc = (struct usb_ss_ep_comp_descriptor *) buffer;
+
+	if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP ||
+			size < USB_DT_SS_EP_COMP_SIZE) {
+		dev_notice(ddev, "No SuperSpeed endpoint companion for config %d "
+				" interface %d altsetting %d ep %d: "
+				"using minimum values\n",
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+
+		/* Fill in some default values.
+		 * Leave bmAttributes as zero, which will mean no streams for
+		 * bulk, and isoc won't support multiple bursts of packets.
+		 * With bursts of only one packet, and a Mult of 1, the max
+		 * amount of data moved per endpoint service interval is one
+		 * packet.
+		 */
+		ep->ss_ep_comp.bLength = USB_DT_SS_EP_COMP_SIZE;
+		ep->ss_ep_comp.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
+		if (usb_endpoint_xfer_isoc(&ep->desc) ||
+				usb_endpoint_xfer_int(&ep->desc))
+			ep->ss_ep_comp.wBytesPerInterval =
+					ep->desc.wMaxPacketSize;
+		return;
+	}
+	buffer += desc->bLength;
+	size -= desc->bLength;
+	memcpy(&ep->ss_ep_comp, desc, USB_DT_SS_EP_COMP_SIZE);
+
+	/* Check the various values */
+	if (usb_endpoint_xfer_control(&ep->desc) && desc->bMaxBurst != 0) {
+		dev_notice(ddev, "Control endpoint with bMaxBurst = %d in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to zero\n", desc->bMaxBurst,
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		ep->ss_ep_comp.bMaxBurst = 0;
+	} else if (desc->bMaxBurst > 15) {
+		dev_notice(ddev, "Endpoint with bMaxBurst = %d in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to 15\n", desc->bMaxBurst,
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		ep->ss_ep_comp.bMaxBurst = 15;
+	}
+
+	if ((usb_endpoint_xfer_control(&ep->desc) ||
+			usb_endpoint_xfer_int(&ep->desc)) &&
+				desc->bmAttributes != 0) {
+		dev_notice(ddev, "%s endpoint with bmAttributes = %d in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to zero\n",
+				usb_endpoint_xfer_control(&ep->desc) ? "Control" : "Bulk",
+				desc->bmAttributes,
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		ep->ss_ep_comp.bmAttributes = 0;
+	} else if (usb_endpoint_xfer_bulk(&ep->desc) &&
+			desc->bmAttributes > 16) {
+		dev_notice(ddev, "Bulk endpoint with more than 65536 streams in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to max\n",
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		ep->ss_ep_comp.bmAttributes = 16;
+	} else if (usb_endpoint_xfer_isoc(&ep->desc) &&
+		   !USB_SS_SSP_ISOC_COMP(desc->bmAttributes) &&
+		   USB_SS_MULT(desc->bmAttributes) > 3) {
+		dev_notice(ddev, "Isoc endpoint has Mult of %d in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to 3\n",
+				USB_SS_MULT(desc->bmAttributes),
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		ep->ss_ep_comp.bmAttributes = 2;
+	}
+
+	if (usb_endpoint_xfer_isoc(&ep->desc))
+		max_tx = (desc->bMaxBurst + 1) *
+			(USB_SS_MULT(desc->bmAttributes)) *
+			usb_endpoint_maxp(&ep->desc);
+	else if (usb_endpoint_xfer_int(&ep->desc))
+		max_tx = usb_endpoint_maxp(&ep->desc) *
+			(desc->bMaxBurst + 1);
+	else
+		max_tx = 999999;
+	if (le16_to_cpu(desc->wBytesPerInterval) > max_tx) {
+		dev_notice(ddev, "%s endpoint with wBytesPerInterval of %d in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to %d\n",
+				usb_endpoint_xfer_isoc(&ep->desc) ? "Isoc" : "Int",
+				le16_to_cpu(desc->wBytesPerInterval),
+				cfgno, inum, asnum, ep->desc.bEndpointAddress,
+				max_tx);
+		ep->ss_ep_comp.wBytesPerInterval = cpu_to_le16(max_tx);
+	}
+	/* Parse a possible SuperSpeedPlus isoc ep companion descriptor */
+	if (usb_endpoint_xfer_isoc(&ep->desc) &&
+	    USB_SS_SSP_ISOC_COMP(desc->bmAttributes))
+		usb_parse_ssp_isoc_endpoint_companion(ddev, cfgno, inum, asnum,
+							ep, buffer, size);
+}
+
+static const unsigned short low_speed_maxpacket_maxes[4] = {
+	[USB_ENDPOINT_XFER_CONTROL] = 8,
+	[USB_ENDPOINT_XFER_ISOC] = 0,
+	[USB_ENDPOINT_XFER_BULK] = 0,
+	[USB_ENDPOINT_XFER_INT] = 8,
+};
+static const unsigned short full_speed_maxpacket_maxes[4] = {
+	[USB_ENDPOINT_XFER_CONTROL] = 64,
+	[USB_ENDPOINT_XFER_ISOC] = 1023,
+	[USB_ENDPOINT_XFER_BULK] = 64,
+	[USB_ENDPOINT_XFER_INT] = 64,
+};
+static const unsigned short high_speed_maxpacket_maxes[4] = {
+	[USB_ENDPOINT_XFER_CONTROL] = 64,
+	[USB_ENDPOINT_XFER_ISOC] = 1024,
+
+	/* Bulk should be 512, but some devices use 1024: we will warn below */
+	[USB_ENDPOINT_XFER_BULK] = 1024,
+	[USB_ENDPOINT_XFER_INT] = 1024,
+};
+static const unsigned short super_speed_maxpacket_maxes[4] = {
+	[USB_ENDPOINT_XFER_CONTROL] = 512,
+	[USB_ENDPOINT_XFER_ISOC] = 1024,
+	[USB_ENDPOINT_XFER_BULK] = 1024,
+	[USB_ENDPOINT_XFER_INT] = 1024,
+};
+
+static bool endpoint_is_duplicate(struct usb_endpoint_descriptor *e1,
+		struct usb_endpoint_descriptor *e2)
+{
+	if (e1->bEndpointAddress == e2->bEndpointAddress)
+		return true;
+
+	if (usb_endpoint_xfer_control(e1) || usb_endpoint_xfer_control(e2)) {
+		if (usb_endpoint_num(e1) == usb_endpoint_num(e2))
+			return true;
+	}
+
+	return false;
+}
+
+/*
+ * Check for duplicate endpoint addresses in other interfaces and in the
+ * altsetting currently being parsed.
+ */
+static bool config_endpoint_is_duplicate(struct usb_host_config *config,
+		int inum, int asnum, struct usb_endpoint_descriptor *d)
+{
+	struct usb_endpoint_descriptor *epd;
+	struct usb_interface_cache *intfc;
+	struct usb_host_interface *alt;
+	int i, j, k;
+
+	for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+		intfc = config->intf_cache[i];
+
+		for (j = 0; j < intfc->num_altsetting; ++j) {
+			alt = &intfc->altsetting[j];
+
+			if (alt->desc.bInterfaceNumber == inum &&
+					alt->desc.bAlternateSetting != asnum)
+				continue;
+
+			for (k = 0; k < alt->desc.bNumEndpoints; ++k) {
+				epd = &alt->endpoint[k].desc;
+
+				if (endpoint_is_duplicate(epd, d))
+					return true;
+			}
+		}
+	}
+
+	return false;
+}
+
+static int usb_parse_endpoint(struct device *ddev, int cfgno,
+		struct usb_host_config *config, int inum, int asnum,
+		struct usb_host_interface *ifp, int num_ep,
+		unsigned char *buffer, int size)
+{
+	struct usb_device *udev = to_usb_device(ddev);
+	unsigned char *buffer0 = buffer;
+	struct usb_endpoint_descriptor *d;
+	struct usb_host_endpoint *endpoint;
+	int n, i, j, retval;
+	unsigned int maxp;
+	const unsigned short *maxpacket_maxes;
+
+	d = (struct usb_endpoint_descriptor *) buffer;
+	buffer += d->bLength;
+	size -= d->bLength;
+
+	if (d->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE)
+		n = USB_DT_ENDPOINT_AUDIO_SIZE;
+	else if (d->bLength >= USB_DT_ENDPOINT_SIZE)
+		n = USB_DT_ENDPOINT_SIZE;
+	else {
+		dev_notice(ddev, "config %d interface %d altsetting %d has an "
+		    "invalid endpoint descriptor of length %d, skipping\n",
+		    cfgno, inum, asnum, d->bLength);
+		goto skip_to_next_endpoint_or_interface_descriptor;
+	}
+
+	i = d->bEndpointAddress & ~USB_ENDPOINT_DIR_MASK;
+	if (i >= 16 || i == 0) {
+		dev_notice(ddev, "config %d interface %d altsetting %d has an "
+		    "invalid endpoint with address 0x%X, skipping\n",
+		    cfgno, inum, asnum, d->bEndpointAddress);
+		goto skip_to_next_endpoint_or_interface_descriptor;
+	}
+
+	/* Only store as many endpoints as we have room for */
+	if (ifp->desc.bNumEndpoints >= num_ep)
+		goto skip_to_next_endpoint_or_interface_descriptor;
+
+	/* Check for duplicate endpoint addresses */
+	if (config_endpoint_is_duplicate(config, inum, asnum, d)) {
+		dev_notice(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
+				cfgno, inum, asnum, d->bEndpointAddress);
+		goto skip_to_next_endpoint_or_interface_descriptor;
+	}
+
+	/* Ignore some endpoints */
+	if (udev->quirks & USB_QUIRK_ENDPOINT_IGNORE) {
+		if (usb_endpoint_is_ignored(udev, ifp, d)) {
+			dev_notice(ddev, "config %d interface %d altsetting %d has an ignored endpoint with address 0x%X, skipping\n",
+					cfgno, inum, asnum,
+					d->bEndpointAddress);
+			goto skip_to_next_endpoint_or_interface_descriptor;
+		}
+	}
+
+	endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
+	++ifp->desc.bNumEndpoints;
+
+	memcpy(&endpoint->desc, d, n);
+	INIT_LIST_HEAD(&endpoint->urb_list);
+
+	/*
+	 * Fix up bInterval values outside the legal range.
+	 * Use 10 or 8 ms if no proper value can be guessed.
+	 */
+	i = 0;		/* i = min, j = max, n = default */
+	j = 255;
+	if (usb_endpoint_xfer_int(d)) {
+		i = 1;
+		switch (udev->speed) {
+		case USB_SPEED_SUPER_PLUS:
+		case USB_SPEED_SUPER:
+		case USB_SPEED_HIGH:
+			/*
+			 * Many device manufacturers are using full-speed
+			 * bInterval values in high-speed interrupt endpoint
+			 * descriptors. Try to fix those and fall back to an
+			 * 8-ms default value otherwise.
+			 */
+			n = fls(d->bInterval*8);
+			if (n == 0)
+				n = 7;	/* 8 ms = 2^(7-1) uframes */
+			j = 16;
+
+			/*
+			 * Adjust bInterval for quirked devices.
+			 */
+			/*
+			 * This quirk fixes bIntervals reported in ms.
+			 */
+			if (udev->quirks & USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL) {
+				n = clamp(fls(d->bInterval) + 3, i, j);
+				i = j = n;
+			}
+			/*
+			 * This quirk fixes bIntervals reported in
+			 * linear microframes.
+			 */
+			if (udev->quirks & USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL) {
+				n = clamp(fls(d->bInterval), i, j);
+				i = j = n;
+			}
+			break;
+		default:		/* USB_SPEED_FULL or _LOW */
+			/*
+			 * For low-speed, 10 ms is the official minimum.
+			 * But some "overclocked" devices might want faster
+			 * polling so we'll allow it.
+			 */
+			n = 10;
+			break;
+		}
+	} else if (usb_endpoint_xfer_isoc(d)) {
+		i = 1;
+		j = 16;
+		switch (udev->speed) {
+		case USB_SPEED_HIGH:
+			n = 7;		/* 8 ms = 2^(7-1) uframes */
+			break;
+		default:		/* USB_SPEED_FULL */
+			n = 4;		/* 8 ms = 2^(4-1) frames */
+			break;
+		}
+	}
+	if (d->bInterval < i || d->bInterval > j) {
+		dev_notice(ddev, "config %d interface %d altsetting %d "
+		    "endpoint 0x%X has an invalid bInterval %d, "
+		    "changing to %d\n",
+		    cfgno, inum, asnum,
+		    d->bEndpointAddress, d->bInterval, n);
+		endpoint->desc.bInterval = n;
+	}
+
+	/* Some buggy low-speed devices have Bulk endpoints, which is
+	 * explicitly forbidden by the USB spec.  In an attempt to make
+	 * them usable, we will try treating them as Interrupt endpoints.
+	 */
+	if (udev->speed == USB_SPEED_LOW && usb_endpoint_xfer_bulk(d)) {
+		dev_notice(ddev, "config %d interface %d altsetting %d "
+		    "endpoint 0x%X is Bulk; changing to Interrupt\n",
+		    cfgno, inum, asnum, d->bEndpointAddress);
+		endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT;
+		endpoint->desc.bInterval = 1;
+		if (usb_endpoint_maxp(&endpoint->desc) > 8)
+			endpoint->desc.wMaxPacketSize = cpu_to_le16(8);
+	}
+
+	/*
+	 * Validate the wMaxPacketSize field.
+	 * Some devices have isochronous endpoints in altsetting 0;
+	 * the USB-2 spec requires such endpoints to have wMaxPacketSize = 0
+	 * (see the end of section 5.6.3), so don't warn about them.
+	 */
+	maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize);
+	if (maxp == 0 && !(usb_endpoint_xfer_isoc(d) && asnum == 0)) {
+		dev_notice(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid wMaxPacketSize 0\n",
+		    cfgno, inum, asnum, d->bEndpointAddress);
+	}
+
+	/* Find the highest legal maxpacket size for this endpoint */
+	i = 0;		/* additional transactions per microframe */
+	switch (udev->speed) {
+	case USB_SPEED_LOW:
+		maxpacket_maxes = low_speed_maxpacket_maxes;
+		break;
+	case USB_SPEED_FULL:
+		maxpacket_maxes = full_speed_maxpacket_maxes;
+		break;
+	case USB_SPEED_HIGH:
+		/* Multiple-transactions bits are allowed only for HS periodic endpoints */
+		if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) {
+			i = maxp & USB_EP_MAXP_MULT_MASK;
+			maxp &= ~i;
+		}
+		fallthrough;
+	default:
+		maxpacket_maxes = high_speed_maxpacket_maxes;
+		break;
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+		maxpacket_maxes = super_speed_maxpacket_maxes;
+		break;
+	}
+	j = maxpacket_maxes[usb_endpoint_type(&endpoint->desc)];
+
+	if (maxp > j) {
+		dev_notice(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid maxpacket %d, setting to %d\n",
+		    cfgno, inum, asnum, d->bEndpointAddress, maxp, j);
+		maxp = j;
+		endpoint->desc.wMaxPacketSize = cpu_to_le16(i | maxp);
+	}
+
+	/*
+	 * Some buggy high speed devices have bulk endpoints using
+	 * maxpacket sizes other than 512.  High speed HCDs may not
+	 * be able to handle that particular bug, so let's warn...
+	 */
+	if (udev->speed == USB_SPEED_HIGH && usb_endpoint_xfer_bulk(d)) {
+		if (maxp != 512)
+			dev_notice(ddev, "config %d interface %d altsetting %d "
+				"bulk endpoint 0x%X has invalid maxpacket %d\n",
+				cfgno, inum, asnum, d->bEndpointAddress,
+				maxp);
+	}
+
+	/* Parse a possible SuperSpeed endpoint companion descriptor */
+	if (udev->speed >= USB_SPEED_SUPER)
+		usb_parse_ss_endpoint_companion(ddev, cfgno,
+				inum, asnum, endpoint, buffer, size);
+
+	/* Skip over any Class Specific or Vendor Specific descriptors;
+	 * find the next endpoint or interface descriptor */
+	endpoint->extra = buffer;
+	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
+			USB_DT_INTERFACE, &n);
+	endpoint->extralen = i;
+	retval = buffer - buffer0 + i;
+	if (n > 0)
+		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
+		    n, plural(n), "endpoint");
+	return retval;
+
+skip_to_next_endpoint_or_interface_descriptor:
+	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
+	    USB_DT_INTERFACE, NULL);
+	return buffer - buffer0 + i;
+}
+
+void usb_release_interface_cache(struct kref *ref)
+{
+	struct usb_interface_cache *intfc = ref_to_usb_interface_cache(ref);
+	int j;
+
+	for (j = 0; j < intfc->num_altsetting; j++) {
+		struct usb_host_interface *alt = &intfc->altsetting[j];
+
+		kfree(alt->endpoint);
+		kfree(alt->string);
+	}
+	kfree(intfc);
+}
+
+static int usb_parse_interface(struct device *ddev, int cfgno,
+    struct usb_host_config *config, unsigned char *buffer, int size,
+    u8 inums[], u8 nalts[])
+{
+	unsigned char *buffer0 = buffer;
+	struct usb_interface_descriptor	*d;
+	int inum, asnum;
+	struct usb_interface_cache *intfc;
+	struct usb_host_interface *alt;
+	int i, n;
+	int len, retval;
+	int num_ep, num_ep_orig;
+
+	d = (struct usb_interface_descriptor *) buffer;
+	buffer += d->bLength;
+	size -= d->bLength;
+
+	if (d->bLength < USB_DT_INTERFACE_SIZE)
+		goto skip_to_next_interface_descriptor;
+
+	/* Which interface entry is this? */
+	intfc = NULL;
+	inum = d->bInterfaceNumber;
+	for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+		if (inums[i] == inum) {
+			intfc = config->intf_cache[i];
+			break;
+		}
+	}
+	if (!intfc || intfc->num_altsetting >= nalts[i])
+		goto skip_to_next_interface_descriptor;
+
+	/* Check for duplicate altsetting entries */
+	asnum = d->bAlternateSetting;
+	for ((i = 0, alt = &intfc->altsetting[0]);
+	      i < intfc->num_altsetting;
+	     (++i, ++alt)) {
+		if (alt->desc.bAlternateSetting == asnum) {
+			dev_notice(ddev, "Duplicate descriptor for config %d "
+			    "interface %d altsetting %d, skipping\n",
+			    cfgno, inum, asnum);
+			goto skip_to_next_interface_descriptor;
+		}
+	}
+
+	++intfc->num_altsetting;
+	memcpy(&alt->desc, d, USB_DT_INTERFACE_SIZE);
+
+	/* Skip over any Class Specific or Vendor Specific descriptors;
+	 * find the first endpoint or interface descriptor */
+	alt->extra = buffer;
+	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
+	    USB_DT_INTERFACE, &n);
+	alt->extralen = i;
+	if (n > 0)
+		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
+		    n, plural(n), "interface");
+	buffer += i;
+	size -= i;
+
+	/* Allocate space for the right(?) number of endpoints */
+	num_ep = num_ep_orig = alt->desc.bNumEndpoints;
+	alt->desc.bNumEndpoints = 0;		/* Use as a counter */
+	if (num_ep > USB_MAXENDPOINTS) {
+		dev_notice(ddev, "too many endpoints for config %d interface %d "
+		    "altsetting %d: %d, using maximum allowed: %d\n",
+		    cfgno, inum, asnum, num_ep, USB_MAXENDPOINTS);
+		num_ep = USB_MAXENDPOINTS;
+	}
+
+	if (num_ep > 0) {
+		/* Can't allocate 0 bytes */
+		len = sizeof(struct usb_host_endpoint) * num_ep;
+		alt->endpoint = kzalloc(len, GFP_KERNEL);
+		if (!alt->endpoint)
+			return -ENOMEM;
+	}
+
+	/* Parse all the endpoint descriptors */
+	n = 0;
+	while (size > 0) {
+		if (((struct usb_descriptor_header *) buffer)->bDescriptorType
+		     == USB_DT_INTERFACE)
+			break;
+		retval = usb_parse_endpoint(ddev, cfgno, config, inum, asnum,
+				alt, num_ep, buffer, size);
+		if (retval < 0)
+			return retval;
+		++n;
+
+		buffer += retval;
+		size -= retval;
+	}
+
+	if (n != num_ep_orig)
+		dev_notice(ddev, "config %d interface %d altsetting %d has %d "
+		    "endpoint descriptor%s, different from the interface "
+		    "descriptor's value: %d\n",
+		    cfgno, inum, asnum, n, plural(n), num_ep_orig);
+	return buffer - buffer0;
+
+skip_to_next_interface_descriptor:
+	i = find_next_descriptor(buffer, size, USB_DT_INTERFACE,
+	    USB_DT_INTERFACE, NULL);
+	return buffer - buffer0 + i;
+}
+
+static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
+    struct usb_host_config *config, unsigned char *buffer, int size)
+{
+	struct device *ddev = &dev->dev;
+	unsigned char *buffer0 = buffer;
+	int cfgno;
+	int nintf, nintf_orig;
+	int i, j, n;
+	struct usb_interface_cache *intfc;
+	unsigned char *buffer2;
+	int size2;
+	struct usb_descriptor_header *header;
+	int retval;
+	u8 inums[USB_MAXINTERFACES], nalts[USB_MAXINTERFACES];
+	unsigned iad_num = 0;
+
+	memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE);
+	nintf = nintf_orig = config->desc.bNumInterfaces;
+	config->desc.bNumInterfaces = 0;	// Adjusted later
+
+	if (config->desc.bDescriptorType != USB_DT_CONFIG ||
+	    config->desc.bLength < USB_DT_CONFIG_SIZE ||
+	    config->desc.bLength > size) {
+		dev_notice(ddev, "invalid descriptor for config index %d: "
+		    "type = 0x%X, length = %d\n", cfgidx,
+		    config->desc.bDescriptorType, config->desc.bLength);
+		return -EINVAL;
+	}
+	cfgno = config->desc.bConfigurationValue;
+
+	buffer += config->desc.bLength;
+	size -= config->desc.bLength;
+
+	if (nintf > USB_MAXINTERFACES) {
+		dev_notice(ddev, "config %d has too many interfaces: %d, "
+		    "using maximum allowed: %d\n",
+		    cfgno, nintf, USB_MAXINTERFACES);
+		nintf = USB_MAXINTERFACES;
+	}
+
+	/* Go through the descriptors, checking their length and counting the
+	 * number of altsettings for each interface */
+	n = 0;
+	for ((buffer2 = buffer, size2 = size);
+	      size2 > 0;
+	     (buffer2 += header->bLength, size2 -= header->bLength)) {
+
+		if (size2 < sizeof(struct usb_descriptor_header)) {
+			dev_notice(ddev, "config %d descriptor has %d excess "
+			    "byte%s, ignoring\n",
+			    cfgno, size2, plural(size2));
+			break;
+		}
+
+		header = (struct usb_descriptor_header *) buffer2;
+		if ((header->bLength > size2) || (header->bLength < 2)) {
+			dev_notice(ddev, "config %d has an invalid descriptor "
+			    "of length %d, skipping remainder of the config\n",
+			    cfgno, header->bLength);
+			break;
+		}
+
+		if (header->bDescriptorType == USB_DT_INTERFACE) {
+			struct usb_interface_descriptor *d;
+			int inum;
+
+			d = (struct usb_interface_descriptor *) header;
+			if (d->bLength < USB_DT_INTERFACE_SIZE) {
+				dev_notice(ddev, "config %d has an invalid "
+				    "interface descriptor of length %d, "
+				    "skipping\n", cfgno, d->bLength);
+				continue;
+			}
+
+			inum = d->bInterfaceNumber;
+
+			if ((dev->quirks & USB_QUIRK_HONOR_BNUMINTERFACES) &&
+			    n >= nintf_orig) {
+				dev_notice(ddev, "config %d has more interface "
+				    "descriptors, than it declares in "
+				    "bNumInterfaces, ignoring interface "
+				    "number: %d\n", cfgno, inum);
+				continue;
+			}
+
+			if (inum >= nintf_orig)
+				dev_notice(ddev, "config %d has an invalid "
+				    "interface number: %d but max is %d\n",
+				    cfgno, inum, nintf_orig - 1);
+
+			/* Have we already encountered this interface?
+			 * Count its altsettings */
+			for (i = 0; i < n; ++i) {
+				if (inums[i] == inum)
+					break;
+			}
+			if (i < n) {
+				if (nalts[i] < 255)
+					++nalts[i];
+			} else if (n < USB_MAXINTERFACES) {
+				inums[n] = inum;
+				nalts[n] = 1;
+				++n;
+			}
+
+		} else if (header->bDescriptorType ==
+				USB_DT_INTERFACE_ASSOCIATION) {
+			struct usb_interface_assoc_descriptor *d;
+
+			d = (struct usb_interface_assoc_descriptor *)header;
+			if (d->bLength < USB_DT_INTERFACE_ASSOCIATION_SIZE) {
+				dev_notice(ddev,
+					 "config %d has an invalid interface association descriptor of length %d, skipping\n",
+					 cfgno, d->bLength);
+				continue;
+			}
+
+			if (iad_num == USB_MAXIADS) {
+				dev_notice(ddev, "found more Interface "
+					       "Association Descriptors "
+					       "than allocated for in "
+					       "configuration %d\n", cfgno);
+			} else {
+				config->intf_assoc[iad_num] = d;
+				iad_num++;
+			}
+
+		} else if (header->bDescriptorType == USB_DT_DEVICE ||
+			    header->bDescriptorType == USB_DT_CONFIG)
+			dev_notice(ddev, "config %d contains an unexpected "
+			    "descriptor of type 0x%X, skipping\n",
+			    cfgno, header->bDescriptorType);
+
+	}	/* for ((buffer2 = buffer, size2 = size); ...) */
+	size = buffer2 - buffer;
+	config->desc.wTotalLength = cpu_to_le16(buffer2 - buffer0);
+
+	if (n != nintf)
+		dev_notice(ddev, "config %d has %d interface%s, different from "
+		    "the descriptor's value: %d\n",
+		    cfgno, n, plural(n), nintf_orig);
+	else if (n == 0)
+		dev_notice(ddev, "config %d has no interfaces?\n", cfgno);
+	config->desc.bNumInterfaces = nintf = n;
+
+	/* Check for missing interface numbers */
+	for (i = 0; i < nintf; ++i) {
+		for (j = 0; j < nintf; ++j) {
+			if (inums[j] == i)
+				break;
+		}
+		if (j >= nintf)
+			dev_notice(ddev, "config %d has no interface number "
+			    "%d\n", cfgno, i);
+	}
+
+	/* Allocate the usb_interface_caches and altsetting arrays */
+	for (i = 0; i < nintf; ++i) {
+		j = nalts[i];
+		if (j > USB_MAXALTSETTING) {
+			dev_notice(ddev, "too many alternate settings for "
+			    "config %d interface %d: %d, "
+			    "using maximum allowed: %d\n",
+			    cfgno, inums[i], j, USB_MAXALTSETTING);
+			nalts[i] = j = USB_MAXALTSETTING;
+		}
+
+		intfc = kzalloc(struct_size(intfc, altsetting, j), GFP_KERNEL);
+		config->intf_cache[i] = intfc;
+		if (!intfc)
+			return -ENOMEM;
+		kref_init(&intfc->ref);
+	}
+
+	/* FIXME: parse the BOS descriptor */
+
+	/* Skip over any Class Specific or Vendor Specific descriptors;
+	 * find the first interface descriptor */
+	config->extra = buffer;
+	i = find_next_descriptor(buffer, size, USB_DT_INTERFACE,
+	    USB_DT_INTERFACE, &n);
+	config->extralen = i;
+	if (n > 0)
+		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
+		    n, plural(n), "configuration");
+	buffer += i;
+	size -= i;
+
+	/* Parse all the interface/altsetting descriptors */
+	while (size > 0) {
+		retval = usb_parse_interface(ddev, cfgno, config,
+		    buffer, size, inums, nalts);
+		if (retval < 0)
+			return retval;
+
+		buffer += retval;
+		size -= retval;
+	}
+
+	/* Check for missing altsettings */
+	for (i = 0; i < nintf; ++i) {
+		intfc = config->intf_cache[i];
+		for (j = 0; j < intfc->num_altsetting; ++j) {
+			for (n = 0; n < intfc->num_altsetting; ++n) {
+				if (intfc->altsetting[n].desc.
+				    bAlternateSetting == j)
+					break;
+			}
+			if (n >= intfc->num_altsetting)
+				dev_notice(ddev, "config %d interface %d has no "
+				    "altsetting %d\n", cfgno, inums[i], j);
+		}
+	}
+
+	return 0;
+}
+
+/* hub-only!! ... and only exported for reset/reinit path.
+ * otherwise used internally on disconnect/destroy path
+ */
+void usb_destroy_configuration(struct usb_device *dev)
+{
+	int c, i;
+
+	if (!dev->config)
+		return;
+
+	if (dev->rawdescriptors) {
+		for (i = 0; i < dev->descriptor.bNumConfigurations; i++)
+			kfree(dev->rawdescriptors[i]);
+
+		kfree(dev->rawdescriptors);
+		dev->rawdescriptors = NULL;
+	}
+
+	for (c = 0; c < dev->descriptor.bNumConfigurations; c++) {
+		struct usb_host_config *cf = &dev->config[c];
+
+		kfree(cf->string);
+		for (i = 0; i < cf->desc.bNumInterfaces; i++) {
+			if (cf->intf_cache[i])
+				kref_put(&cf->intf_cache[i]->ref,
+					  usb_release_interface_cache);
+		}
+	}
+	kfree(dev->config);
+	dev->config = NULL;
+}
+
+
+/*
+ * Get the USB config descriptors, cache and parse'em
+ *
+ * hub-only!! ... and only in reset path, or usb_new_device()
+ * (used by real hubs and virtual root hubs)
+ */
+int usb_get_configuration(struct usb_device *dev)
+{
+	struct device *ddev = &dev->dev;
+	int ncfg = dev->descriptor.bNumConfigurations;
+	unsigned int cfgno, length;
+	unsigned char *bigbuffer;
+	struct usb_config_descriptor *desc;
+	int result;
+
+	if (ncfg > USB_MAXCONFIG) {
+		dev_notice(ddev, "too many configurations: %d, "
+		    "using maximum allowed: %d\n", ncfg, USB_MAXCONFIG);
+		dev->descriptor.bNumConfigurations = ncfg = USB_MAXCONFIG;
+	}
+
+	if (ncfg < 1) {
+		dev_err(ddev, "no configurations\n");
+		return -EINVAL;
+	}
+
+	length = ncfg * sizeof(struct usb_host_config);
+	dev->config = kzalloc(length, GFP_KERNEL);
+	if (!dev->config)
+		return -ENOMEM;
+
+	length = ncfg * sizeof(char *);
+	dev->rawdescriptors = kzalloc(length, GFP_KERNEL);
+	if (!dev->rawdescriptors)
+		return -ENOMEM;
+
+	desc = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL);
+	if (!desc)
+		return -ENOMEM;
+
+	for (cfgno = 0; cfgno < ncfg; cfgno++) {
+		/* We grab just the first descriptor so we know how long
+		 * the whole configuration is */
+		result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
+		    desc, USB_DT_CONFIG_SIZE);
+		if (result < 0) {
+			dev_err(ddev, "unable to read config index %d "
+			    "descriptor/%s: %d\n", cfgno, "start", result);
+			if (result != -EPIPE)
+				goto err;
+			dev_notice(ddev, "chopping to %d config(s)\n", cfgno);
+			dev->descriptor.bNumConfigurations = cfgno;
+			break;
+		} else if (result < 4) {
+			dev_err(ddev, "config index %d descriptor too short "
+			    "(expected %i, got %i)\n", cfgno,
+			    USB_DT_CONFIG_SIZE, result);
+			result = -EINVAL;
+			goto err;
+		}
+		length = max((int) le16_to_cpu(desc->wTotalLength),
+		    USB_DT_CONFIG_SIZE);
+
+		/* Now that we know the length, get the whole thing */
+		bigbuffer = kmalloc(length, GFP_KERNEL);
+		if (!bigbuffer) {
+			result = -ENOMEM;
+			goto err;
+		}
+
+		if (dev->quirks & USB_QUIRK_DELAY_INIT)
+			msleep(200);
+
+		result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
+		    bigbuffer, length);
+		if (result < 0) {
+			dev_err(ddev, "unable to read config index %d "
+			    "descriptor/%s\n", cfgno, "all");
+			kfree(bigbuffer);
+			goto err;
+		}
+		if (result < length) {
+			dev_notice(ddev, "config index %d descriptor too short "
+			    "(expected %i, got %i)\n", cfgno, length, result);
+			length = result;
+		}
+
+		dev->rawdescriptors[cfgno] = bigbuffer;
+
+		result = usb_parse_configuration(dev, cfgno,
+		    &dev->config[cfgno], bigbuffer, length);
+		if (result < 0) {
+			++cfgno;
+			goto err;
+		}
+	}
+
+err:
+	kfree(desc);
+	dev->descriptor.bNumConfigurations = cfgno;
+
+	return result;
+}
+
+void usb_release_bos_descriptor(struct usb_device *dev)
+{
+	if (dev->bos) {
+		kfree(dev->bos->desc);
+		kfree(dev->bos);
+		dev->bos = NULL;
+	}
+}
+
+static const __u8 bos_desc_len[256] = {
+	[USB_CAP_TYPE_WIRELESS_USB] = USB_DT_USB_WIRELESS_CAP_SIZE,
+	[USB_CAP_TYPE_EXT]          = USB_DT_USB_EXT_CAP_SIZE,
+	[USB_SS_CAP_TYPE]           = USB_DT_USB_SS_CAP_SIZE,
+	[USB_SSP_CAP_TYPE]          = USB_DT_USB_SSP_CAP_SIZE(1),
+	[CONTAINER_ID_TYPE]         = USB_DT_USB_SS_CONTN_ID_SIZE,
+	[USB_PTM_CAP_TYPE]          = USB_DT_USB_PTM_ID_SIZE,
+};
+
+/* Get BOS descriptor set */
+int usb_get_bos_descriptor(struct usb_device *dev)
+{
+	struct device *ddev = &dev->dev;
+	struct usb_bos_descriptor *bos;
+	struct usb_dev_cap_header *cap;
+	struct usb_ssp_cap_descriptor *ssp_cap;
+	unsigned char *buffer, *buffer0;
+	int length, total_len, num, i, ssac;
+	__u8 cap_type;
+	int ret;
+
+	bos = kzalloc(sizeof(*bos), GFP_KERNEL);
+	if (!bos)
+		return -ENOMEM;
+
+	/* Get BOS descriptor */
+	ret = usb_get_descriptor(dev, USB_DT_BOS, 0, bos, USB_DT_BOS_SIZE);
+	if (ret < USB_DT_BOS_SIZE || bos->bLength < USB_DT_BOS_SIZE) {
+		dev_notice(ddev, "unable to get BOS descriptor or descriptor too short\n");
+		if (ret >= 0)
+			ret = -ENOMSG;
+		kfree(bos);
+		return ret;
+	}
+
+	length = bos->bLength;
+	total_len = le16_to_cpu(bos->wTotalLength);
+	num = bos->bNumDeviceCaps;
+	kfree(bos);
+	if (total_len < length)
+		return -EINVAL;
+
+	dev->bos = kzalloc(sizeof(*dev->bos), GFP_KERNEL);
+	if (!dev->bos)
+		return -ENOMEM;
+
+	/* Now let's get the whole BOS descriptor set */
+	buffer = kzalloc(total_len, GFP_KERNEL);
+	if (!buffer) {
+		ret = -ENOMEM;
+		goto err;
+	}
+	dev->bos->desc = (struct usb_bos_descriptor *)buffer;
+
+	ret = usb_get_descriptor(dev, USB_DT_BOS, 0, buffer, total_len);
+	if (ret < total_len) {
+		dev_notice(ddev, "unable to get BOS descriptor set\n");
+		if (ret >= 0)
+			ret = -ENOMSG;
+		goto err;
+	}
+
+	buffer0 = buffer;
+	total_len -= length;
+	buffer += length;
+
+	for (i = 0; i < num; i++) {
+		cap = (struct usb_dev_cap_header *)buffer;
+
+		if (total_len < sizeof(*cap) || total_len < cap->bLength) {
+			dev->bos->desc->bNumDeviceCaps = i;
+			break;
+		}
+		cap_type = cap->bDevCapabilityType;
+		length = cap->bLength;
+		if (bos_desc_len[cap_type] && length < bos_desc_len[cap_type]) {
+			dev->bos->desc->bNumDeviceCaps = i;
+			break;
+		}
+
+		if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) {
+			dev_notice(ddev, "descriptor type invalid, skip\n");
+			goto skip_to_next_descriptor;
+		}
+
+		switch (cap_type) {
+		case USB_CAP_TYPE_WIRELESS_USB:
+			/* Wireless USB cap descriptor is handled by wusb */
+			break;
+		case USB_CAP_TYPE_EXT:
+			dev->bos->ext_cap =
+				(struct usb_ext_cap_descriptor *)buffer;
+			break;
+		case USB_SS_CAP_TYPE:
+			dev->bos->ss_cap =
+				(struct usb_ss_cap_descriptor *)buffer;
+			break;
+		case USB_SSP_CAP_TYPE:
+			ssp_cap = (struct usb_ssp_cap_descriptor *)buffer;
+			ssac = (le32_to_cpu(ssp_cap->bmAttributes) &
+				USB_SSP_SUBLINK_SPEED_ATTRIBS);
+			if (length >= USB_DT_USB_SSP_CAP_SIZE(ssac))
+				dev->bos->ssp_cap = ssp_cap;
+			break;
+		case CONTAINER_ID_TYPE:
+			dev->bos->ss_id =
+				(struct usb_ss_container_id_descriptor *)buffer;
+			break;
+		case USB_PTM_CAP_TYPE:
+			dev->bos->ptm_cap =
+				(struct usb_ptm_cap_descriptor *)buffer;
+			break;
+		default:
+			break;
+		}
+
+skip_to_next_descriptor:
+		total_len -= length;
+		buffer += length;
+	}
+	dev->bos->desc->wTotalLength = cpu_to_le16(buffer - buffer0);
+
+	return 0;
+
+err:
+	usb_release_bos_descriptor(dev);
+	return ret;
+}
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
new file mode 100644
index 000000000..2c14a9636
--- /dev/null
+++ b/drivers/usb/core/devices.c
@@ -0,0 +1,546 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * devices.c
+ * (C) Copyright 1999 Randy Dunlap.
+ * (C) Copyright 1999,2000 Thomas Sailer <sailer@ife.ee.ethz.ch>.
+ *     (proc file per device)
+ * (C) Copyright 1999 Deti Fliegl (new USB architecture)
+ *
+ *************************************************************
+ *
+ * <mountpoint>/devices contains USB topology, device, config, class,
+ * interface, & endpoint data.
+ *
+ * I considered using /dev/bus/usb/device# for each device
+ * as it is attached or detached, but I didn't like this for some
+ * reason -- maybe it's just too deep of a directory structure.
+ * I also don't like looking in multiple places to gather and view
+ * the data.  Having only one file for ./devices also prevents race
+ * conditions that could arise if a program was reading device info
+ * for devices that are being removed (unplugged).  (That is, the
+ * program may find a directory for devnum_12 then try to open it,
+ * but it was just unplugged, so the directory is now deleted.
+ * But programs would just have to be prepared for situations like
+ * this in any plug-and-play environment.)
+ *
+ * 1999-12-16: Thomas Sailer <sailer@ife.ee.ethz.ch>
+ *   Converted the whole proc stuff to real
+ *   read methods. Now not the whole device list needs to fit
+ *   into one page, only the device list for one bus.
+ *   Added a poll method to /sys/kernel/debug/usb/devices, to wake
+ *   up an eventual usbd
+ * 2000-01-04: Thomas Sailer <sailer@ife.ee.ethz.ch>
+ *   Turned into its own filesystem
+ * 2000-07-05: Ashley Montanaro <ashley@compsoc.man.ac.uk>
+ *   Converted file reading routine to dump to buffer once
+ *   per device, not per bus
+ */
+
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/gfp.h>
+#include <linux/usb.h>
+#include <linux/usbdevice_fs.h>
+#include <linux/usb/hcd.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+
+#include "usb.h"
+
+/* Define ALLOW_SERIAL_NUMBER if you want to see the serial number of devices */
+#define ALLOW_SERIAL_NUMBER
+
+static const char format_topo[] =
+/* T:  Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=dddd MxCh=dd */
+"\nT:  Bus=%2.2d Lev=%2.2d Prnt=%2.2d Port=%2.2d Cnt=%2.2d Dev#=%3d Spd=%-4s MxCh=%2d\n";
+
+static const char format_string_manufacturer[] =
+/* S:  Manufacturer=xxxx */
+  "S:  Manufacturer=%.100s\n";
+
+static const char format_string_product[] =
+/* S:  Product=xxxx */
+  "S:  Product=%.100s\n";
+
+#ifdef ALLOW_SERIAL_NUMBER
+static const char format_string_serialnumber[] =
+/* S:  SerialNumber=xxxx */
+  "S:  SerialNumber=%.100s\n";
+#endif
+
+static const char format_bandwidth[] =
+/* B:  Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd */
+  "B:  Alloc=%3d/%3d us (%2d%%), #Int=%3d, #Iso=%3d\n";
+
+static const char format_device1[] =
+/* D:  Ver=xx.xx Cls=xx(sssss) Sub=xx Prot=xx MxPS=dd #Cfgs=dd */
+  "D:  Ver=%2x.%02x Cls=%02x(%-5s) Sub=%02x Prot=%02x MxPS=%2d #Cfgs=%3d\n";
+
+static const char format_device2[] =
+/* P:  Vendor=xxxx ProdID=xxxx Rev=xx.xx */
+  "P:  Vendor=%04x ProdID=%04x Rev=%2x.%02x\n";
+
+static const char format_config[] =
+/* C:  #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA */
+  "C:%c #Ifs=%2d Cfg#=%2d Atr=%02x MxPwr=%3dmA\n";
+
+static const char format_iad[] =
+/* A:  FirstIf#=dd IfCount=dd Cls=xx(sssss) Sub=xx Prot=xx */
+  "A:  FirstIf#=%2d IfCount=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x\n";
+
+static const char format_iface[] =
+/* I:  If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=xxxx*/
+  "I:%c If#=%2d Alt=%2d #EPs=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x Driver=%s\n";
+
+static const char format_endpt[] =
+/* E:  Ad=xx(s) Atr=xx(ssss) MxPS=dddd Ivl=D?s */
+  "E:  Ad=%02x(%c) Atr=%02x(%-4s) MxPS=%4d Ivl=%d%cs\n";
+
+struct class_info {
+	int class;
+	char *class_name;
+};
+
+static const struct class_info clas_info[] = {
+	/* max. 5 chars. per name string */
+	{USB_CLASS_PER_INTERFACE,	">ifc"},
+	{USB_CLASS_AUDIO,		"audio"},
+	{USB_CLASS_COMM,		"comm."},
+	{USB_CLASS_HID,			"HID"},
+	{USB_CLASS_PHYSICAL,		"PID"},
+	{USB_CLASS_STILL_IMAGE,		"still"},
+	{USB_CLASS_PRINTER,		"print"},
+	{USB_CLASS_MASS_STORAGE,	"stor."},
+	{USB_CLASS_HUB,			"hub"},
+	{USB_CLASS_CDC_DATA,		"data"},
+	{USB_CLASS_CSCID,		"scard"},
+	{USB_CLASS_CONTENT_SEC,		"c-sec"},
+	{USB_CLASS_VIDEO,		"video"},
+	{USB_CLASS_PERSONAL_HEALTHCARE,	"perhc"},
+	{USB_CLASS_AUDIO_VIDEO,		"av"},
+	{USB_CLASS_BILLBOARD,		"blbrd"},
+	{USB_CLASS_USB_TYPE_C_BRIDGE,	"bridg"},
+	{USB_CLASS_WIRELESS_CONTROLLER,	"wlcon"},
+	{USB_CLASS_MISC,		"misc"},
+	{USB_CLASS_APP_SPEC,		"app."},
+	{USB_CLASS_VENDOR_SPEC,		"vend."},
+	{-1,				"unk."}		/* leave as last */
+};
+
+/*****************************************************************/
+
+static const char *class_decode(const int class)
+{
+	int ix;
+
+	for (ix = 0; clas_info[ix].class != -1; ix++)
+		if (clas_info[ix].class == class)
+			break;
+	return clas_info[ix].class_name;
+}
+
+static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
+				const struct usb_endpoint_descriptor *desc)
+{
+	char dir, unit, *type;
+	unsigned interval, bandwidth = 1;
+
+	if (start > end)
+		return start;
+
+	dir = usb_endpoint_dir_in(desc) ? 'I' : 'O';
+
+	if (speed == USB_SPEED_HIGH)
+		bandwidth = usb_endpoint_maxp_mult(desc);
+
+	/* this isn't checking for illegal values */
+	switch (usb_endpoint_type(desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		type = "Ctrl";
+		dir = 'B';			/* ctrl is bidirectional */
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		type = "Isoc";
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		type = "Bulk";
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		type = "Int.";
+		break;
+	default:	/* "can't happen" */
+		return start;
+	}
+
+	interval = usb_decode_interval(desc, speed);
+	if (interval % 1000) {
+		unit = 'u';
+	} else {
+		unit = 'm';
+		interval /= 1000;
+	}
+
+	start += sprintf(start, format_endpt, desc->bEndpointAddress, dir,
+			 desc->bmAttributes, type,
+			 usb_endpoint_maxp(desc) *
+			 bandwidth,
+			 interval, unit);
+	return start;
+}
+
+static char *usb_dump_interface_descriptor(char *start, char *end,
+					const struct usb_interface_cache *intfc,
+					const struct usb_interface *iface,
+					int setno)
+{
+	const struct usb_interface_descriptor *desc;
+	const char *driver_name = "";
+	int active = 0;
+
+	if (start > end)
+		return start;
+	desc = &intfc->altsetting[setno].desc;
+	if (iface) {
+		driver_name = (iface->dev.driver
+				? iface->dev.driver->name
+				: "(none)");
+		active = (desc == &iface->cur_altsetting->desc);
+	}
+	start += sprintf(start, format_iface,
+			 active ? '*' : ' ',	/* mark active altsetting */
+			 desc->bInterfaceNumber,
+			 desc->bAlternateSetting,
+			 desc->bNumEndpoints,
+			 desc->bInterfaceClass,
+			 class_decode(desc->bInterfaceClass),
+			 desc->bInterfaceSubClass,
+			 desc->bInterfaceProtocol,
+			 driver_name);
+	return start;
+}
+
+static char *usb_dump_interface(int speed, char *start, char *end,
+				const struct usb_interface_cache *intfc,
+				const struct usb_interface *iface, int setno)
+{
+	const struct usb_host_interface *desc = &intfc->altsetting[setno];
+	int i;
+
+	start = usb_dump_interface_descriptor(start, end, intfc, iface, setno);
+	for (i = 0; i < desc->desc.bNumEndpoints; i++) {
+		start = usb_dump_endpoint_descriptor(speed,
+				start, end, &desc->endpoint[i].desc);
+	}
+	return start;
+}
+
+static char *usb_dump_iad_descriptor(char *start, char *end,
+			const struct usb_interface_assoc_descriptor *iad)
+{
+	if (start > end)
+		return start;
+	start += sprintf(start, format_iad,
+			 iad->bFirstInterface,
+			 iad->bInterfaceCount,
+			 iad->bFunctionClass,
+			 class_decode(iad->bFunctionClass),
+			 iad->bFunctionSubClass,
+			 iad->bFunctionProtocol);
+	return start;
+}
+
+/* TBD:
+ * 0. TBDs
+ * 1. marking active interface altsettings (code lists all, but should mark
+ *    which ones are active, if any)
+ */
+static char *usb_dump_config_descriptor(char *start, char *end,
+				const struct usb_config_descriptor *desc,
+				int active, int speed)
+{
+	int mul;
+
+	if (start > end)
+		return start;
+	if (speed >= USB_SPEED_SUPER)
+		mul = 8;
+	else
+		mul = 2;
+	start += sprintf(start, format_config,
+			 /* mark active/actual/current cfg. */
+			 active ? '*' : ' ',
+			 desc->bNumInterfaces,
+			 desc->bConfigurationValue,
+			 desc->bmAttributes,
+			 desc->bMaxPower * mul);
+	return start;
+}
+
+static char *usb_dump_config(int speed, char *start, char *end,
+			     const struct usb_host_config *config, int active)
+{
+	int i, j;
+	struct usb_interface_cache *intfc;
+	struct usb_interface *interface;
+
+	if (start > end)
+		return start;
+	if (!config)
+		/* getting these some in 2.3.7; none in 2.3.6 */
+		return start + sprintf(start, "(null Cfg. desc.)\n");
+	start = usb_dump_config_descriptor(start, end, &config->desc, active,
+			speed);
+	for (i = 0; i < USB_MAXIADS; i++) {
+		if (config->intf_assoc[i] == NULL)
+			break;
+		start = usb_dump_iad_descriptor(start, end,
+					config->intf_assoc[i]);
+	}
+	for (i = 0; i < config->desc.bNumInterfaces; i++) {
+		intfc = config->intf_cache[i];
+		interface = config->interface[i];
+		for (j = 0; j < intfc->num_altsetting; j++) {
+			start = usb_dump_interface(speed,
+				start, end, intfc, interface, j);
+		}
+	}
+	return start;
+}
+
+/*
+ * Dump the different USB descriptors.
+ */
+static char *usb_dump_device_descriptor(char *start, char *end,
+				const struct usb_device_descriptor *desc)
+{
+	u16 bcdUSB = le16_to_cpu(desc->bcdUSB);
+	u16 bcdDevice = le16_to_cpu(desc->bcdDevice);
+
+	if (start > end)
+		return start;
+	start += sprintf(start, format_device1,
+			  bcdUSB >> 8, bcdUSB & 0xff,
+			  desc->bDeviceClass,
+			  class_decode(desc->bDeviceClass),
+			  desc->bDeviceSubClass,
+			  desc->bDeviceProtocol,
+			  desc->bMaxPacketSize0,
+			  desc->bNumConfigurations);
+	if (start > end)
+		return start;
+	start += sprintf(start, format_device2,
+			 le16_to_cpu(desc->idVendor),
+			 le16_to_cpu(desc->idProduct),
+			 bcdDevice >> 8, bcdDevice & 0xff);
+	return start;
+}
+
+/*
+ * Dump the different strings that this device holds.
+ */
+static char *usb_dump_device_strings(char *start, char *end,
+				     struct usb_device *dev)
+{
+	if (start > end)
+		return start;
+	if (dev->manufacturer)
+		start += sprintf(start, format_string_manufacturer,
+				 dev->manufacturer);
+	if (start > end)
+		goto out;
+	if (dev->product)
+		start += sprintf(start, format_string_product, dev->product);
+	if (start > end)
+		goto out;
+#ifdef ALLOW_SERIAL_NUMBER
+	if (dev->serial)
+		start += sprintf(start, format_string_serialnumber,
+				 dev->serial);
+#endif
+ out:
+	return start;
+}
+
+static char *usb_dump_desc(char *start, char *end, struct usb_device *dev)
+{
+	int i;
+
+	start = usb_dump_device_descriptor(start, end, &dev->descriptor);
+
+	start = usb_dump_device_strings(start, end, dev);
+
+	for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
+		start = usb_dump_config(dev->speed,
+				start, end, dev->config + i,
+				/* active ? */
+				(dev->config + i) == dev->actconfig);
+	}
+	return start;
+}
+
+/*****************************************************************/
+
+/* This is a recursive function. Parameters:
+ * buffer - the user-space buffer to write data into
+ * nbytes - the maximum number of bytes to write
+ * skip_bytes - the number of bytes to skip before writing anything
+ * file_offset - the offset into the devices file on completion
+ * The caller must own the device lock.
+ */
+static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes,
+			       loff_t *skip_bytes, loff_t *file_offset,
+			       struct usb_device *usbdev, struct usb_bus *bus,
+			       int level, int index, int count)
+{
+	int chix;
+	int ret, cnt = 0;
+	int parent_devnum = 0;
+	char *pages_start, *data_end, *speed;
+	unsigned int length;
+	ssize_t total_written = 0;
+	struct usb_device *childdev = NULL;
+
+	/* don't bother with anything else if we're not writing any data */
+	if (*nbytes <= 0)
+		return 0;
+
+	if (level > MAX_TOPO_LEVEL)
+		return 0;
+	/* allocate 2^1 pages = 8K (on i386);
+	 * should be more than enough for one device */
+	pages_start = (char *)__get_free_pages(GFP_NOIO, 1);
+	if (!pages_start)
+		return -ENOMEM;
+
+	if (usbdev->parent && usbdev->parent->devnum != -1)
+		parent_devnum = usbdev->parent->devnum;
+	/*
+	 * So the root hub's parent is 0 and any device that is
+	 * plugged into the root hub has a parent of 0.
+	 */
+	switch (usbdev->speed) {
+	case USB_SPEED_LOW:
+		speed = "1.5"; break;
+	case USB_SPEED_UNKNOWN:		/* usb 1.1 root hub code */
+	case USB_SPEED_FULL:
+		speed = "12"; break;
+	case USB_SPEED_WIRELESS:	/* Wireless has no real fixed speed */
+	case USB_SPEED_HIGH:
+		speed = "480"; break;
+	case USB_SPEED_SUPER:
+		speed = "5000"; break;
+	case USB_SPEED_SUPER_PLUS:
+		speed = "10000"; break;
+	default:
+		speed = "??";
+	}
+	data_end = pages_start + sprintf(pages_start, format_topo,
+			bus->busnum, level, parent_devnum,
+			index, count, usbdev->devnum,
+			speed, usbdev->maxchild);
+	/*
+	 * level = topology-tier level;
+	 * parent_devnum = parent device number;
+	 * index = parent's connector number;
+	 * count = device count at this level
+	 */
+	/* If this is the root hub, display the bandwidth information */
+	if (level == 0) {
+		int	max;
+
+		/* super/high speed reserves 80%, full/low reserves 90% */
+		if (usbdev->speed == USB_SPEED_HIGH ||
+		    usbdev->speed >= USB_SPEED_SUPER)
+			max = 800;
+		else
+			max = FRAME_TIME_MAX_USECS_ALLOC;
+
+		/* report "average" periodic allocation over a microsecond.
+		 * the schedules are actually bursty, HCDs need to deal with
+		 * that and just compute/report this average.
+		 */
+		data_end += sprintf(data_end, format_bandwidth,
+				bus->bandwidth_allocated, max,
+				(100 * bus->bandwidth_allocated + max / 2)
+					/ max,
+				bus->bandwidth_int_reqs,
+				bus->bandwidth_isoc_reqs);
+
+	}
+	data_end = usb_dump_desc(data_end, pages_start + (2 * PAGE_SIZE) - 256,
+				 usbdev);
+
+	if (data_end > (pages_start + (2 * PAGE_SIZE) - 256))
+		data_end += sprintf(data_end, "(truncated)\n");
+
+	length = data_end - pages_start;
+	/* if we can start copying some data to the user */
+	if (length > *skip_bytes) {
+		length -= *skip_bytes;
+		if (length > *nbytes)
+			length = *nbytes;
+		if (copy_to_user(*buffer, pages_start + *skip_bytes, length)) {
+			free_pages((unsigned long)pages_start, 1);
+			return -EFAULT;
+		}
+		*nbytes -= length;
+		*file_offset += length;
+		total_written += length;
+		*buffer += length;
+		*skip_bytes = 0;
+	} else
+		*skip_bytes -= length;
+
+	free_pages((unsigned long)pages_start, 1);
+
+	/* Now look at all of this device's children. */
+	usb_hub_for_each_child(usbdev, chix, childdev) {
+		usb_lock_device(childdev);
+		ret = usb_device_dump(buffer, nbytes, skip_bytes,
+				      file_offset, childdev, bus,
+				      level + 1, chix - 1, ++cnt);
+		usb_unlock_device(childdev);
+		if (ret == -EFAULT)
+			return total_written;
+		total_written += ret;
+	}
+	return total_written;
+}
+
+static ssize_t usb_device_read(struct file *file, char __user *buf,
+			       size_t nbytes, loff_t *ppos)
+{
+	struct usb_bus *bus;
+	ssize_t ret, total_written = 0;
+	loff_t skip_bytes = *ppos;
+	int id;
+
+	if (*ppos < 0)
+		return -EINVAL;
+	if (nbytes <= 0)
+		return 0;
+
+	mutex_lock(&usb_bus_idr_lock);
+	/* print devices for all busses */
+	idr_for_each_entry(&usb_bus_idr, bus, id) {
+		/* recurse through all children of the root hub */
+		if (!bus_to_hcd(bus)->rh_registered)
+			continue;
+		usb_lock_device(bus->root_hub);
+		ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos,
+				      bus->root_hub, bus, 0, 0, 0);
+		usb_unlock_device(bus->root_hub);
+		if (ret < 0) {
+			mutex_unlock(&usb_bus_idr_lock);
+			return ret;
+		}
+		total_written += ret;
+	}
+	mutex_unlock(&usb_bus_idr_lock);
+	return total_written;
+}
+
+const struct file_operations usbfs_devices_fops = {
+	.llseek =	no_seek_end_llseek,
+	.read =		usb_device_read,
+};
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
new file mode 100644
index 000000000..4184cd65a
--- /dev/null
+++ b/drivers/usb/core/devio.c
@@ -0,0 +1,2921 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*****************************************************************************/
+
+/*
+ *      devio.c  --  User space communication with USB devices.
+ *
+ *      Copyright (C) 1999-2000  Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ *  This file implements the usbfs/x/y files, where
+ *  x is the bus number and y the device number.
+ *
+ *  It allows user space programs/"drivers" to communicate directly
+ *  with USB devices without intervening kernel driver.
+ *
+ *  Revision history
+ *    22.12.1999   0.1   Initial release (split from proc_usb.c)
+ *    04.01.2000   0.2   Turned into its own filesystem
+ *    30.09.2005   0.3   Fix user-triggerable oops in async URB delivery
+ *    			 (CAN-2005-3055)
+ */
+
+/*****************************************************************************/
+
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/sched/signal.h>
+#include <linux/slab.h>
+#include <linux/signal.h>
+#include <linux/poll.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/usb.h>
+#include <linux/usbdevice_fs.h>
+#include <linux/usb/hcd.h>	/* for usbcore internals */
+#include <linux/usb/quirks.h>
+#include <linux/cdev.h>
+#include <linux/notifier.h>
+#include <linux/security.h>
+#include <linux/user_namespace.h>
+#include <linux/scatterlist.h>
+#include <linux/uaccess.h>
+#include <linux/dma-mapping.h>
+#include <asm/byteorder.h>
+#include <linux/moduleparam.h>
+
+#include "usb.h"
+
+#ifdef CONFIG_PM
+#define MAYBE_CAP_SUSPEND	USBDEVFS_CAP_SUSPEND
+#else
+#define MAYBE_CAP_SUSPEND	0
+#endif
+
+#define USB_MAXBUS			64
+#define USB_DEVICE_MAX			(USB_MAXBUS * 128)
+#define USB_SG_SIZE			16384 /* split-size for large txs */
+
+/* Mutual exclusion for ps->list in resume vs. release and remove */
+static DEFINE_MUTEX(usbfs_mutex);
+
+struct usb_dev_state {
+	struct list_head list;      /* state list */
+	struct usb_device *dev;
+	struct file *file;
+	spinlock_t lock;            /* protects the async urb lists */
+	struct list_head async_pending;
+	struct list_head async_completed;
+	struct list_head memory_list;
+	wait_queue_head_t wait;     /* wake up if a request completed */
+	wait_queue_head_t wait_for_resume;   /* wake up upon runtime resume */
+	unsigned int discsignr;
+	struct pid *disc_pid;
+	const struct cred *cred;
+	sigval_t disccontext;
+	unsigned long ifclaimed;
+	u32 disabled_bulk_eps;
+	unsigned long interface_allowed_mask;
+	int not_yet_resumed;
+	bool suspend_allowed;
+	bool privileges_dropped;
+};
+
+struct usb_memory {
+	struct list_head memlist;
+	int vma_use_count;
+	int urb_use_count;
+	u32 size;
+	void *mem;
+	dma_addr_t dma_handle;
+	unsigned long vm_start;
+	struct usb_dev_state *ps;
+};
+
+struct async {
+	struct list_head asynclist;
+	struct usb_dev_state *ps;
+	struct pid *pid;
+	const struct cred *cred;
+	unsigned int signr;
+	unsigned int ifnum;
+	void __user *userbuffer;
+	void __user *userurb;
+	sigval_t userurb_sigval;
+	struct urb *urb;
+	struct usb_memory *usbm;
+	unsigned int mem_usage;
+	int status;
+	u8 bulk_addr;
+	u8 bulk_status;
+};
+
+static bool usbfs_snoop;
+module_param(usbfs_snoop, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic");
+
+static unsigned usbfs_snoop_max = 65536;
+module_param(usbfs_snoop_max, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(usbfs_snoop_max,
+		"maximum number of bytes to print while snooping");
+
+#define snoop(dev, format, arg...)				\
+	do {							\
+		if (usbfs_snoop)				\
+			dev_info(dev, format, ## arg);		\
+	} while (0)
+
+enum snoop_when {
+	SUBMIT, COMPLETE
+};
+
+#define USB_DEVICE_DEV		MKDEV(USB_DEVICE_MAJOR, 0)
+
+/* Limit on the total amount of memory we can allocate for transfers */
+static u32 usbfs_memory_mb = 16;
+module_param(usbfs_memory_mb, uint, 0644);
+MODULE_PARM_DESC(usbfs_memory_mb,
+		"maximum MB allowed for usbfs buffers (0 = no limit)");
+
+/* Hard limit, necessary to avoid arithmetic overflow */
+#define USBFS_XFER_MAX         (UINT_MAX / 2 - 1000000)
+
+static DEFINE_SPINLOCK(usbfs_memory_usage_lock);
+static u64 usbfs_memory_usage;	/* Total memory currently allocated */
+
+/* Check whether it's okay to allocate more memory for a transfer */
+static int usbfs_increase_memory_usage(u64 amount)
+{
+	u64 lim, total_mem;
+	unsigned long flags;
+	int ret;
+
+	lim = READ_ONCE(usbfs_memory_mb);
+	lim <<= 20;
+
+	ret = 0;
+	spin_lock_irqsave(&usbfs_memory_usage_lock, flags);
+	total_mem = usbfs_memory_usage + amount;
+	if (lim > 0 && total_mem > lim)
+		ret = -ENOMEM;
+	else
+		usbfs_memory_usage = total_mem;
+	spin_unlock_irqrestore(&usbfs_memory_usage_lock, flags);
+
+	return ret;
+}
+
+/* Memory for a transfer is being deallocated */
+static void usbfs_decrease_memory_usage(u64 amount)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&usbfs_memory_usage_lock, flags);
+	if (amount > usbfs_memory_usage)
+		usbfs_memory_usage = 0;
+	else
+		usbfs_memory_usage -= amount;
+	spin_unlock_irqrestore(&usbfs_memory_usage_lock, flags);
+}
+
+static int connected(struct usb_dev_state *ps)
+{
+	return (!list_empty(&ps->list) &&
+			ps->dev->state != USB_STATE_NOTATTACHED);
+}
+
+static void dec_usb_memory_use_count(struct usb_memory *usbm, int *count)
+{
+	struct usb_dev_state *ps = usbm->ps;
+	struct usb_hcd *hcd = bus_to_hcd(ps->dev->bus);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ps->lock, flags);
+	--*count;
+	if (usbm->urb_use_count == 0 && usbm->vma_use_count == 0) {
+		list_del(&usbm->memlist);
+		spin_unlock_irqrestore(&ps->lock, flags);
+
+		hcd_buffer_free_pages(hcd, usbm->size,
+				usbm->mem, usbm->dma_handle);
+		usbfs_decrease_memory_usage(
+			usbm->size + sizeof(struct usb_memory));
+		kfree(usbm);
+	} else {
+		spin_unlock_irqrestore(&ps->lock, flags);
+	}
+}
+
+static void usbdev_vm_open(struct vm_area_struct *vma)
+{
+	struct usb_memory *usbm = vma->vm_private_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&usbm->ps->lock, flags);
+	++usbm->vma_use_count;
+	spin_unlock_irqrestore(&usbm->ps->lock, flags);
+}
+
+static void usbdev_vm_close(struct vm_area_struct *vma)
+{
+	struct usb_memory *usbm = vma->vm_private_data;
+
+	dec_usb_memory_use_count(usbm, &usbm->vma_use_count);
+}
+
+static const struct vm_operations_struct usbdev_vm_ops = {
+	.open = usbdev_vm_open,
+	.close = usbdev_vm_close
+};
+
+static int usbdev_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct usb_memory *usbm = NULL;
+	struct usb_dev_state *ps = file->private_data;
+	struct usb_hcd *hcd = bus_to_hcd(ps->dev->bus);
+	size_t size = vma->vm_end - vma->vm_start;
+	void *mem;
+	unsigned long flags;
+	dma_addr_t dma_handle = DMA_MAPPING_ERROR;
+	int ret;
+
+	ret = usbfs_increase_memory_usage(size + sizeof(struct usb_memory));
+	if (ret)
+		goto error;
+
+	usbm = kzalloc(sizeof(struct usb_memory), GFP_KERNEL);
+	if (!usbm) {
+		ret = -ENOMEM;
+		goto error_decrease_mem;
+	}
+
+	mem = hcd_buffer_alloc_pages(hcd,
+			size, GFP_USER | __GFP_NOWARN, &dma_handle);
+	if (!mem) {
+		ret = -ENOMEM;
+		goto error_free_usbm;
+	}
+
+	memset(mem, 0, size);
+
+	usbm->mem = mem;
+	usbm->dma_handle = dma_handle;
+	usbm->size = size;
+	usbm->ps = ps;
+	usbm->vm_start = vma->vm_start;
+	usbm->vma_use_count = 1;
+	INIT_LIST_HEAD(&usbm->memlist);
+
+	/*
+	 * In DMA-unavailable cases, hcd_buffer_alloc_pages allocates
+	 * normal pages and assigns DMA_MAPPING_ERROR to dma_handle. Check
+	 * whether we are in such cases, and then use remap_pfn_range (or
+	 * dma_mmap_coherent) to map normal (or DMA) pages into the user
+	 * space, respectively.
+	 */
+	if (dma_handle == DMA_MAPPING_ERROR) {
+		if (remap_pfn_range(vma, vma->vm_start,
+				    virt_to_phys(usbm->mem) >> PAGE_SHIFT,
+				    size, vma->vm_page_prot) < 0) {
+			dec_usb_memory_use_count(usbm, &usbm->vma_use_count);
+			return -EAGAIN;
+		}
+	} else {
+		if (dma_mmap_coherent(hcd->self.sysdev, vma, mem, dma_handle,
+				      size)) {
+			dec_usb_memory_use_count(usbm, &usbm->vma_use_count);
+			return -EAGAIN;
+		}
+	}
+
+	vma->vm_flags |= VM_IO;
+	vma->vm_flags |= (VM_DONTEXPAND | VM_DONTDUMP);
+	vma->vm_ops = &usbdev_vm_ops;
+	vma->vm_private_data = usbm;
+
+	spin_lock_irqsave(&ps->lock, flags);
+	list_add_tail(&usbm->memlist, &ps->memory_list);
+	spin_unlock_irqrestore(&ps->lock, flags);
+
+	return 0;
+
+error_free_usbm:
+	kfree(usbm);
+error_decrease_mem:
+	usbfs_decrease_memory_usage(size + sizeof(struct usb_memory));
+error:
+	return ret;
+}
+
+static ssize_t usbdev_read(struct file *file, char __user *buf, size_t nbytes,
+			   loff_t *ppos)
+{
+	struct usb_dev_state *ps = file->private_data;
+	struct usb_device *dev = ps->dev;
+	ssize_t ret = 0;
+	unsigned len;
+	loff_t pos;
+	int i;
+
+	pos = *ppos;
+	usb_lock_device(dev);
+	if (!connected(ps)) {
+		ret = -ENODEV;
+		goto err;
+	} else if (pos < 0) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (pos < sizeof(struct usb_device_descriptor)) {
+		/* 18 bytes - fits on the stack */
+		struct usb_device_descriptor temp_desc;
+
+		memcpy(&temp_desc, &dev->descriptor, sizeof(dev->descriptor));
+		le16_to_cpus(&temp_desc.bcdUSB);
+		le16_to_cpus(&temp_desc.idVendor);
+		le16_to_cpus(&temp_desc.idProduct);
+		le16_to_cpus(&temp_desc.bcdDevice);
+
+		len = sizeof(struct usb_device_descriptor) - pos;
+		if (len > nbytes)
+			len = nbytes;
+		if (copy_to_user(buf, ((char *)&temp_desc) + pos, len)) {
+			ret = -EFAULT;
+			goto err;
+		}
+
+		*ppos += len;
+		buf += len;
+		nbytes -= len;
+		ret += len;
+	}
+
+	pos = sizeof(struct usb_device_descriptor);
+	for (i = 0; nbytes && i < dev->descriptor.bNumConfigurations; i++) {
+		struct usb_config_descriptor *config =
+			(struct usb_config_descriptor *)dev->rawdescriptors[i];
+		unsigned int length = le16_to_cpu(config->wTotalLength);
+
+		if (*ppos < pos + length) {
+
+			/* The descriptor may claim to be longer than it
+			 * really is.  Here is the actual allocated length. */
+			unsigned alloclen =
+				le16_to_cpu(dev->config[i].desc.wTotalLength);
+
+			len = length - (*ppos - pos);
+			if (len > nbytes)
+				len = nbytes;
+
+			/* Simply don't write (skip over) unallocated parts */
+			if (alloclen > (*ppos - pos)) {
+				alloclen -= (*ppos - pos);
+				if (copy_to_user(buf,
+				    dev->rawdescriptors[i] + (*ppos - pos),
+				    min(len, alloclen))) {
+					ret = -EFAULT;
+					goto err;
+				}
+			}
+
+			*ppos += len;
+			buf += len;
+			nbytes -= len;
+			ret += len;
+		}
+
+		pos += length;
+	}
+
+err:
+	usb_unlock_device(dev);
+	return ret;
+}
+
+/*
+ * async list handling
+ */
+
+static struct async *alloc_async(unsigned int numisoframes)
+{
+	struct async *as;
+
+	as = kzalloc(sizeof(struct async), GFP_KERNEL);
+	if (!as)
+		return NULL;
+	as->urb = usb_alloc_urb(numisoframes, GFP_KERNEL);
+	if (!as->urb) {
+		kfree(as);
+		return NULL;
+	}
+	return as;
+}
+
+static void free_async(struct async *as)
+{
+	int i;
+
+	put_pid(as->pid);
+	if (as->cred)
+		put_cred(as->cred);
+	for (i = 0; i < as->urb->num_sgs; i++) {
+		if (sg_page(&as->urb->sg[i]))
+			kfree(sg_virt(&as->urb->sg[i]));
+	}
+
+	kfree(as->urb->sg);
+	if (as->usbm == NULL)
+		kfree(as->urb->transfer_buffer);
+	else
+		dec_usb_memory_use_count(as->usbm, &as->usbm->urb_use_count);
+
+	kfree(as->urb->setup_packet);
+	usb_free_urb(as->urb);
+	usbfs_decrease_memory_usage(as->mem_usage);
+	kfree(as);
+}
+
+static void async_newpending(struct async *as)
+{
+	struct usb_dev_state *ps = as->ps;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ps->lock, flags);
+	list_add_tail(&as->asynclist, &ps->async_pending);
+	spin_unlock_irqrestore(&ps->lock, flags);
+}
+
+static void async_removepending(struct async *as)
+{
+	struct usb_dev_state *ps = as->ps;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ps->lock, flags);
+	list_del_init(&as->asynclist);
+	spin_unlock_irqrestore(&ps->lock, flags);
+}
+
+static struct async *async_getcompleted(struct usb_dev_state *ps)
+{
+	unsigned long flags;
+	struct async *as = NULL;
+
+	spin_lock_irqsave(&ps->lock, flags);
+	if (!list_empty(&ps->async_completed)) {
+		as = list_entry(ps->async_completed.next, struct async,
+				asynclist);
+		list_del_init(&as->asynclist);
+	}
+	spin_unlock_irqrestore(&ps->lock, flags);
+	return as;
+}
+
+static struct async *async_getpending(struct usb_dev_state *ps,
+					     void __user *userurb)
+{
+	struct async *as;
+
+	list_for_each_entry(as, &ps->async_pending, asynclist)
+		if (as->userurb == userurb) {
+			list_del_init(&as->asynclist);
+			return as;
+		}
+
+	return NULL;
+}
+
+static void snoop_urb(struct usb_device *udev,
+		void __user *userurb, int pipe, unsigned length,
+		int timeout_or_status, enum snoop_when when,
+		unsigned char *data, unsigned data_len)
+{
+	static const char *types[] = {"isoc", "int", "ctrl", "bulk"};
+	static const char *dirs[] = {"out", "in"};
+	int ep;
+	const char *t, *d;
+
+	if (!usbfs_snoop)
+		return;
+
+	ep = usb_pipeendpoint(pipe);
+	t = types[usb_pipetype(pipe)];
+	d = dirs[!!usb_pipein(pipe)];
+
+	if (userurb) {		/* Async */
+		if (when == SUBMIT)
+			dev_info(&udev->dev, "userurb %px, ep%d %s-%s, "
+					"length %u\n",
+					userurb, ep, t, d, length);
+		else
+			dev_info(&udev->dev, "userurb %px, ep%d %s-%s, "
+					"actual_length %u status %d\n",
+					userurb, ep, t, d, length,
+					timeout_or_status);
+	} else {
+		if (when == SUBMIT)
+			dev_info(&udev->dev, "ep%d %s-%s, length %u, "
+					"timeout %d\n",
+					ep, t, d, length, timeout_or_status);
+		else
+			dev_info(&udev->dev, "ep%d %s-%s, actual_length %u, "
+					"status %d\n",
+					ep, t, d, length, timeout_or_status);
+	}
+
+	data_len = min(data_len, usbfs_snoop_max);
+	if (data && data_len > 0) {
+		print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, 32, 1,
+			data, data_len, 1);
+	}
+}
+
+static void snoop_urb_data(struct urb *urb, unsigned len)
+{
+	int i, size;
+
+	len = min(len, usbfs_snoop_max);
+	if (!usbfs_snoop || len == 0)
+		return;
+
+	if (urb->num_sgs == 0) {
+		print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, 32, 1,
+			urb->transfer_buffer, len, 1);
+		return;
+	}
+
+	for (i = 0; i < urb->num_sgs && len; i++) {
+		size = (len > USB_SG_SIZE) ? USB_SG_SIZE : len;
+		print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, 32, 1,
+			sg_virt(&urb->sg[i]), size, 1);
+		len -= size;
+	}
+}
+
+static int copy_urb_data_to_user(u8 __user *userbuffer, struct urb *urb)
+{
+	unsigned i, len, size;
+
+	if (urb->number_of_packets > 0)		/* Isochronous */
+		len = urb->transfer_buffer_length;
+	else					/* Non-Isoc */
+		len = urb->actual_length;
+
+	if (urb->num_sgs == 0) {
+		if (copy_to_user(userbuffer, urb->transfer_buffer, len))
+			return -EFAULT;
+		return 0;
+	}
+
+	for (i = 0; i < urb->num_sgs && len; i++) {
+		size = (len > USB_SG_SIZE) ? USB_SG_SIZE : len;
+		if (copy_to_user(userbuffer, sg_virt(&urb->sg[i]), size))
+			return -EFAULT;
+		userbuffer += size;
+		len -= size;
+	}
+
+	return 0;
+}
+
+#define AS_CONTINUATION	1
+#define AS_UNLINK	2
+
+static void cancel_bulk_urbs(struct usb_dev_state *ps, unsigned bulk_addr)
+__releases(ps->lock)
+__acquires(ps->lock)
+{
+	struct urb *urb;
+	struct async *as;
+
+	/* Mark all the pending URBs that match bulk_addr, up to but not
+	 * including the first one without AS_CONTINUATION.  If such an
+	 * URB is encountered then a new transfer has already started so
+	 * the endpoint doesn't need to be disabled; otherwise it does.
+	 */
+	list_for_each_entry(as, &ps->async_pending, asynclist) {
+		if (as->bulk_addr == bulk_addr) {
+			if (as->bulk_status != AS_CONTINUATION)
+				goto rescan;
+			as->bulk_status = AS_UNLINK;
+			as->bulk_addr = 0;
+		}
+	}
+	ps->disabled_bulk_eps |= (1 << bulk_addr);
+
+	/* Now carefully unlink all the marked pending URBs */
+ rescan:
+	list_for_each_entry_reverse(as, &ps->async_pending, asynclist) {
+		if (as->bulk_status == AS_UNLINK) {
+			as->bulk_status = 0;		/* Only once */
+			urb = as->urb;
+			usb_get_urb(urb);
+			spin_unlock(&ps->lock);		/* Allow completions */
+			usb_unlink_urb(urb);
+			usb_put_urb(urb);
+			spin_lock(&ps->lock);
+			goto rescan;
+		}
+	}
+}
+
+static void async_completed(struct urb *urb)
+{
+	struct async *as = urb->context;
+	struct usb_dev_state *ps = as->ps;
+	struct pid *pid = NULL;
+	const struct cred *cred = NULL;
+	unsigned long flags;
+	sigval_t addr;
+	int signr, errno;
+
+	spin_lock_irqsave(&ps->lock, flags);
+	list_move_tail(&as->asynclist, &ps->async_completed);
+	as->status = urb->status;
+	signr = as->signr;
+	if (signr) {
+		errno = as->status;
+		addr = as->userurb_sigval;
+		pid = get_pid(as->pid);
+		cred = get_cred(as->cred);
+	}
+	snoop(&urb->dev->dev, "urb complete\n");
+	snoop_urb(urb->dev, as->userurb, urb->pipe, urb->actual_length,
+			as->status, COMPLETE, NULL, 0);
+	if (usb_urb_dir_in(urb))
+		snoop_urb_data(urb, urb->actual_length);
+
+	if (as->status < 0 && as->bulk_addr && as->status != -ECONNRESET &&
+			as->status != -ENOENT)
+		cancel_bulk_urbs(ps, as->bulk_addr);
+
+	wake_up(&ps->wait);
+	spin_unlock_irqrestore(&ps->lock, flags);
+
+	if (signr) {
+		kill_pid_usb_asyncio(signr, errno, addr, pid, cred);
+		put_pid(pid);
+		put_cred(cred);
+	}
+}
+
+static void destroy_async(struct usb_dev_state *ps, struct list_head *list)
+{
+	struct urb *urb;
+	struct async *as;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ps->lock, flags);
+	while (!list_empty(list)) {
+		as = list_last_entry(list, struct async, asynclist);
+		list_del_init(&as->asynclist);
+		urb = as->urb;
+		usb_get_urb(urb);
+
+		/* drop the spinlock so the completion handler can run */
+		spin_unlock_irqrestore(&ps->lock, flags);
+		usb_kill_urb(urb);
+		usb_put_urb(urb);
+		spin_lock_irqsave(&ps->lock, flags);
+	}
+	spin_unlock_irqrestore(&ps->lock, flags);
+}
+
+static void destroy_async_on_interface(struct usb_dev_state *ps,
+				       unsigned int ifnum)
+{
+	struct list_head *p, *q, hitlist;
+	unsigned long flags;
+
+	INIT_LIST_HEAD(&hitlist);
+	spin_lock_irqsave(&ps->lock, flags);
+	list_for_each_safe(p, q, &ps->async_pending)
+		if (ifnum == list_entry(p, struct async, asynclist)->ifnum)
+			list_move_tail(p, &hitlist);
+	spin_unlock_irqrestore(&ps->lock, flags);
+	destroy_async(ps, &hitlist);
+}
+
+static void destroy_all_async(struct usb_dev_state *ps)
+{
+	destroy_async(ps, &ps->async_pending);
+}
+
+/*
+ * interface claims are made only at the request of user level code,
+ * which can also release them (explicitly or by closing files).
+ * they're also undone when devices disconnect.
+ */
+
+static int driver_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	return -ENODEV;
+}
+
+static void driver_disconnect(struct usb_interface *intf)
+{
+	struct usb_dev_state *ps = usb_get_intfdata(intf);
+	unsigned int ifnum = intf->altsetting->desc.bInterfaceNumber;
+
+	if (!ps)
+		return;
+
+	/* NOTE:  this relies on usbcore having canceled and completed
+	 * all pending I/O requests; 2.6 does that.
+	 */
+
+	if (likely(ifnum < 8*sizeof(ps->ifclaimed)))
+		clear_bit(ifnum, &ps->ifclaimed);
+	else
+		dev_warn(&intf->dev, "interface number %u out of range\n",
+			 ifnum);
+
+	usb_set_intfdata(intf, NULL);
+
+	/* force async requests to complete */
+	destroy_async_on_interface(ps, ifnum);
+}
+
+/* We don't care about suspend/resume of claimed interfaces */
+static int driver_suspend(struct usb_interface *intf, pm_message_t msg)
+{
+	return 0;
+}
+
+static int driver_resume(struct usb_interface *intf)
+{
+	return 0;
+}
+
+#ifdef CONFIG_PM
+/* The following routines apply to the entire device, not interfaces */
+void usbfs_notify_suspend(struct usb_device *udev)
+{
+	/* We don't need to handle this */
+}
+
+void usbfs_notify_resume(struct usb_device *udev)
+{
+	struct usb_dev_state *ps;
+
+	/* Protect against simultaneous remove or release */
+	mutex_lock(&usbfs_mutex);
+	list_for_each_entry(ps, &udev->filelist, list) {
+		WRITE_ONCE(ps->not_yet_resumed, 0);
+		wake_up_all(&ps->wait_for_resume);
+	}
+	mutex_unlock(&usbfs_mutex);
+}
+#endif
+
+struct usb_driver usbfs_driver = {
+	.name =		"usbfs",
+	.probe =	driver_probe,
+	.disconnect =	driver_disconnect,
+	.suspend =	driver_suspend,
+	.resume =	driver_resume,
+	.supports_autosuspend = 1,
+};
+
+static int claimintf(struct usb_dev_state *ps, unsigned int ifnum)
+{
+	struct usb_device *dev = ps->dev;
+	struct usb_interface *intf;
+	int err;
+
+	if (ifnum >= 8*sizeof(ps->ifclaimed))
+		return -EINVAL;
+	/* already claimed */
+	if (test_bit(ifnum, &ps->ifclaimed))
+		return 0;
+
+	if (ps->privileges_dropped &&
+			!test_bit(ifnum, &ps->interface_allowed_mask))
+		return -EACCES;
+
+	intf = usb_ifnum_to_if(dev, ifnum);
+	if (!intf)
+		err = -ENOENT;
+	else {
+		unsigned int old_suppress;
+
+		/* suppress uevents while claiming interface */
+		old_suppress = dev_get_uevent_suppress(&intf->dev);
+		dev_set_uevent_suppress(&intf->dev, 1);
+		err = usb_driver_claim_interface(&usbfs_driver, intf, ps);
+		dev_set_uevent_suppress(&intf->dev, old_suppress);
+	}
+	if (err == 0)
+		set_bit(ifnum, &ps->ifclaimed);
+	return err;
+}
+
+static int releaseintf(struct usb_dev_state *ps, unsigned int ifnum)
+{
+	struct usb_device *dev;
+	struct usb_interface *intf;
+	int err;
+
+	err = -EINVAL;
+	if (ifnum >= 8*sizeof(ps->ifclaimed))
+		return err;
+	dev = ps->dev;
+	intf = usb_ifnum_to_if(dev, ifnum);
+	if (!intf)
+		err = -ENOENT;
+	else if (test_and_clear_bit(ifnum, &ps->ifclaimed)) {
+		unsigned int old_suppress;
+
+		/* suppress uevents while releasing interface */
+		old_suppress = dev_get_uevent_suppress(&intf->dev);
+		dev_set_uevent_suppress(&intf->dev, 1);
+		usb_driver_release_interface(&usbfs_driver, intf);
+		dev_set_uevent_suppress(&intf->dev, old_suppress);
+		err = 0;
+	}
+	return err;
+}
+
+static int checkintf(struct usb_dev_state *ps, unsigned int ifnum)
+{
+	if (ps->dev->state != USB_STATE_CONFIGURED)
+		return -EHOSTUNREACH;
+	if (ifnum >= 8*sizeof(ps->ifclaimed))
+		return -EINVAL;
+	if (test_bit(ifnum, &ps->ifclaimed))
+		return 0;
+	/* if not yet claimed, claim it for the driver */
+	dev_warn(&ps->dev->dev, "usbfs: process %d (%s) did not claim "
+		 "interface %u before use\n", task_pid_nr(current),
+		 current->comm, ifnum);
+	return claimintf(ps, ifnum);
+}
+
+static int findintfep(struct usb_device *dev, unsigned int ep)
+{
+	unsigned int i, j, e;
+	struct usb_interface *intf;
+	struct usb_host_interface *alts;
+	struct usb_endpoint_descriptor *endpt;
+
+	if (ep & ~(USB_DIR_IN|0xf))
+		return -EINVAL;
+	if (!dev->actconfig)
+		return -ESRCH;
+	for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) {
+		intf = dev->actconfig->interface[i];
+		for (j = 0; j < intf->num_altsetting; j++) {
+			alts = &intf->altsetting[j];
+			for (e = 0; e < alts->desc.bNumEndpoints; e++) {
+				endpt = &alts->endpoint[e].desc;
+				if (endpt->bEndpointAddress == ep)
+					return alts->desc.bInterfaceNumber;
+			}
+		}
+	}
+	return -ENOENT;
+}
+
+static int check_ctrlrecip(struct usb_dev_state *ps, unsigned int requesttype,
+			   unsigned int request, unsigned int index)
+{
+	int ret = 0;
+	struct usb_host_interface *alt_setting;
+
+	if (ps->dev->state != USB_STATE_UNAUTHENTICATED
+	 && ps->dev->state != USB_STATE_ADDRESS
+	 && ps->dev->state != USB_STATE_CONFIGURED)
+		return -EHOSTUNREACH;
+	if (USB_TYPE_VENDOR == (USB_TYPE_MASK & requesttype))
+		return 0;
+
+	/*
+	 * check for the special corner case 'get_device_id' in the printer
+	 * class specification, which we always want to allow as it is used
+	 * to query things like ink level, etc.
+	 */
+	if (requesttype == 0xa1 && request == 0) {
+		alt_setting = usb_find_alt_setting(ps->dev->actconfig,
+						   index >> 8, index & 0xff);
+		if (alt_setting
+		 && alt_setting->desc.bInterfaceClass == USB_CLASS_PRINTER)
+			return 0;
+	}
+
+	index &= 0xff;
+	switch (requesttype & USB_RECIP_MASK) {
+	case USB_RECIP_ENDPOINT:
+		if ((index & ~USB_DIR_IN) == 0)
+			return 0;
+		ret = findintfep(ps->dev, index);
+		if (ret < 0) {
+			/*
+			 * Some not fully compliant Win apps seem to get
+			 * index wrong and have the endpoint number here
+			 * rather than the endpoint address (with the
+			 * correct direction). Win does let this through,
+			 * so we'll not reject it here but leave it to
+			 * the device to not break KVM. But we warn.
+			 */
+			ret = findintfep(ps->dev, index ^ 0x80);
+			if (ret >= 0)
+				dev_info(&ps->dev->dev,
+					"%s: process %i (%s) requesting ep %02x but needs %02x\n",
+					__func__, task_pid_nr(current),
+					current->comm, index, index ^ 0x80);
+		}
+		if (ret >= 0)
+			ret = checkintf(ps, ret);
+		break;
+
+	case USB_RECIP_INTERFACE:
+		ret = checkintf(ps, index);
+		break;
+	}
+	return ret;
+}
+
+static struct usb_host_endpoint *ep_to_host_endpoint(struct usb_device *dev,
+						     unsigned char ep)
+{
+	if (ep & USB_ENDPOINT_DIR_MASK)
+		return dev->ep_in[ep & USB_ENDPOINT_NUMBER_MASK];
+	else
+		return dev->ep_out[ep & USB_ENDPOINT_NUMBER_MASK];
+}
+
+static int parse_usbdevfs_streams(struct usb_dev_state *ps,
+				  struct usbdevfs_streams __user *streams,
+				  unsigned int *num_streams_ret,
+				  unsigned int *num_eps_ret,
+				  struct usb_host_endpoint ***eps_ret,
+				  struct usb_interface **intf_ret)
+{
+	unsigned int i, num_streams, num_eps;
+	struct usb_host_endpoint **eps;
+	struct usb_interface *intf = NULL;
+	unsigned char ep;
+	int ifnum, ret;
+
+	if (get_user(num_streams, &streams->num_streams) ||
+	    get_user(num_eps, &streams->num_eps))
+		return -EFAULT;
+
+	if (num_eps < 1 || num_eps > USB_MAXENDPOINTS)
+		return -EINVAL;
+
+	/* The XHCI controller allows max 2 ^ 16 streams */
+	if (num_streams_ret && (num_streams < 2 || num_streams > 65536))
+		return -EINVAL;
+
+	eps = kmalloc_array(num_eps, sizeof(*eps), GFP_KERNEL);
+	if (!eps)
+		return -ENOMEM;
+
+	for (i = 0; i < num_eps; i++) {
+		if (get_user(ep, &streams->eps[i])) {
+			ret = -EFAULT;
+			goto error;
+		}
+		eps[i] = ep_to_host_endpoint(ps->dev, ep);
+		if (!eps[i]) {
+			ret = -EINVAL;
+			goto error;
+		}
+
+		/* usb_alloc/free_streams operate on an usb_interface */
+		ifnum = findintfep(ps->dev, ep);
+		if (ifnum < 0) {
+			ret = ifnum;
+			goto error;
+		}
+
+		if (i == 0) {
+			ret = checkintf(ps, ifnum);
+			if (ret < 0)
+				goto error;
+			intf = usb_ifnum_to_if(ps->dev, ifnum);
+		} else {
+			/* Verify all eps belong to the same interface */
+			if (ifnum != intf->altsetting->desc.bInterfaceNumber) {
+				ret = -EINVAL;
+				goto error;
+			}
+		}
+	}
+
+	if (num_streams_ret)
+		*num_streams_ret = num_streams;
+	*num_eps_ret = num_eps;
+	*eps_ret = eps;
+	*intf_ret = intf;
+
+	return 0;
+
+error:
+	kfree(eps);
+	return ret;
+}
+
+static struct usb_device *usbdev_lookup_by_devt(dev_t devt)
+{
+	struct device *dev;
+
+	dev = bus_find_device_by_devt(&usb_bus_type, devt);
+	if (!dev)
+		return NULL;
+	return to_usb_device(dev);
+}
+
+/*
+ * file operations
+ */
+static int usbdev_open(struct inode *inode, struct file *file)
+{
+	struct usb_device *dev = NULL;
+	struct usb_dev_state *ps;
+	int ret;
+
+	ret = -ENOMEM;
+	ps = kzalloc(sizeof(struct usb_dev_state), GFP_KERNEL);
+	if (!ps)
+		goto out_free_ps;
+
+	ret = -ENODEV;
+
+	/* usbdev device-node */
+	if (imajor(inode) == USB_DEVICE_MAJOR)
+		dev = usbdev_lookup_by_devt(inode->i_rdev);
+	if (!dev)
+		goto out_free_ps;
+
+	usb_lock_device(dev);
+	if (dev->state == USB_STATE_NOTATTACHED)
+		goto out_unlock_device;
+
+	ret = usb_autoresume_device(dev);
+	if (ret)
+		goto out_unlock_device;
+
+	ps->dev = dev;
+	ps->file = file;
+	ps->interface_allowed_mask = 0xFFFFFFFF; /* 32 bits */
+	spin_lock_init(&ps->lock);
+	INIT_LIST_HEAD(&ps->list);
+	INIT_LIST_HEAD(&ps->async_pending);
+	INIT_LIST_HEAD(&ps->async_completed);
+	INIT_LIST_HEAD(&ps->memory_list);
+	init_waitqueue_head(&ps->wait);
+	init_waitqueue_head(&ps->wait_for_resume);
+	ps->disc_pid = get_pid(task_pid(current));
+	ps->cred = get_current_cred();
+	smp_wmb();
+
+	/* Can't race with resume; the device is already active */
+	list_add_tail(&ps->list, &dev->filelist);
+	file->private_data = ps;
+	usb_unlock_device(dev);
+	snoop(&dev->dev, "opened by process %d: %s\n", task_pid_nr(current),
+			current->comm);
+	return ret;
+
+ out_unlock_device:
+	usb_unlock_device(dev);
+	usb_put_dev(dev);
+ out_free_ps:
+	kfree(ps);
+	return ret;
+}
+
+static int usbdev_release(struct inode *inode, struct file *file)
+{
+	struct usb_dev_state *ps = file->private_data;
+	struct usb_device *dev = ps->dev;
+	unsigned int ifnum;
+	struct async *as;
+
+	usb_lock_device(dev);
+	usb_hub_release_all_ports(dev, ps);
+
+	/* Protect against simultaneous resume */
+	mutex_lock(&usbfs_mutex);
+	list_del_init(&ps->list);
+	mutex_unlock(&usbfs_mutex);
+
+	for (ifnum = 0; ps->ifclaimed && ifnum < 8*sizeof(ps->ifclaimed);
+			ifnum++) {
+		if (test_bit(ifnum, &ps->ifclaimed))
+			releaseintf(ps, ifnum);
+	}
+	destroy_all_async(ps);
+	if (!ps->suspend_allowed)
+		usb_autosuspend_device(dev);
+	usb_unlock_device(dev);
+	usb_put_dev(dev);
+	put_pid(ps->disc_pid);
+	put_cred(ps->cred);
+
+	as = async_getcompleted(ps);
+	while (as) {
+		free_async(as);
+		as = async_getcompleted(ps);
+	}
+
+	kfree(ps);
+	return 0;
+}
+
+static void usbfs_blocking_completion(struct urb *urb)
+{
+	complete((struct completion *) urb->context);
+}
+
+/*
+ * Much like usb_start_wait_urb, but returns status separately from
+ * actual_length and uses a killable wait.
+ */
+static int usbfs_start_wait_urb(struct urb *urb, int timeout,
+		unsigned int *actlen)
+{
+	DECLARE_COMPLETION_ONSTACK(ctx);
+	unsigned long expire;
+	int rc;
+
+	urb->context = &ctx;
+	urb->complete = usbfs_blocking_completion;
+	*actlen = 0;
+	rc = usb_submit_urb(urb, GFP_KERNEL);
+	if (unlikely(rc))
+		return rc;
+
+	expire = (timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT);
+	rc = wait_for_completion_killable_timeout(&ctx, expire);
+	if (rc <= 0) {
+		usb_kill_urb(urb);
+		*actlen = urb->actual_length;
+		if (urb->status != -ENOENT)
+			;	/* Completed before it was killed */
+		else if (rc < 0)
+			return -EINTR;
+		else
+			return -ETIMEDOUT;
+	}
+	*actlen = urb->actual_length;
+	return urb->status;
+}
+
+static int do_proc_control(struct usb_dev_state *ps,
+		struct usbdevfs_ctrltransfer *ctrl)
+{
+	struct usb_device *dev = ps->dev;
+	unsigned int tmo;
+	unsigned char *tbuf;
+	unsigned int wLength, actlen;
+	int i, pipe, ret;
+	struct urb *urb = NULL;
+	struct usb_ctrlrequest *dr = NULL;
+
+	ret = check_ctrlrecip(ps, ctrl->bRequestType, ctrl->bRequest,
+			      ctrl->wIndex);
+	if (ret)
+		return ret;
+	wLength = ctrl->wLength;	/* To suppress 64k PAGE_SIZE warning */
+	if (wLength > PAGE_SIZE)
+		return -EINVAL;
+	ret = usbfs_increase_memory_usage(PAGE_SIZE + sizeof(struct urb) +
+			sizeof(struct usb_ctrlrequest));
+	if (ret)
+		return ret;
+
+	ret = -ENOMEM;
+	tbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
+	if (!tbuf)
+		goto done;
+	urb = usb_alloc_urb(0, GFP_NOIO);
+	if (!urb)
+		goto done;
+	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
+	if (!dr)
+		goto done;
+
+	dr->bRequestType = ctrl->bRequestType;
+	dr->bRequest = ctrl->bRequest;
+	dr->wValue = cpu_to_le16(ctrl->wValue);
+	dr->wIndex = cpu_to_le16(ctrl->wIndex);
+	dr->wLength = cpu_to_le16(ctrl->wLength);
+
+	tmo = ctrl->timeout;
+	snoop(&dev->dev, "control urb: bRequestType=%02x "
+		"bRequest=%02x wValue=%04x "
+		"wIndex=%04x wLength=%04x\n",
+		ctrl->bRequestType, ctrl->bRequest, ctrl->wValue,
+		ctrl->wIndex, ctrl->wLength);
+
+	if ((ctrl->bRequestType & USB_DIR_IN) && wLength) {
+		pipe = usb_rcvctrlpipe(dev, 0);
+		usb_fill_control_urb(urb, dev, pipe, (unsigned char *) dr, tbuf,
+				wLength, NULL, NULL);
+		snoop_urb(dev, NULL, pipe, wLength, tmo, SUBMIT, NULL, 0);
+
+		usb_unlock_device(dev);
+		i = usbfs_start_wait_urb(urb, tmo, &actlen);
+
+		/* Linger a bit, prior to the next control message. */
+		if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG)
+			msleep(200);
+		usb_lock_device(dev);
+		snoop_urb(dev, NULL, pipe, actlen, i, COMPLETE, tbuf, actlen);
+		if (!i && actlen) {
+			if (copy_to_user(ctrl->data, tbuf, actlen)) {
+				ret = -EFAULT;
+				goto done;
+			}
+		}
+	} else {
+		if (wLength) {
+			if (copy_from_user(tbuf, ctrl->data, wLength)) {
+				ret = -EFAULT;
+				goto done;
+			}
+		}
+		pipe = usb_sndctrlpipe(dev, 0);
+		usb_fill_control_urb(urb, dev, pipe, (unsigned char *) dr, tbuf,
+				wLength, NULL, NULL);
+		snoop_urb(dev, NULL, pipe, wLength, tmo, SUBMIT, tbuf, wLength);
+
+		usb_unlock_device(dev);
+		i = usbfs_start_wait_urb(urb, tmo, &actlen);
+
+		/* Linger a bit, prior to the next control message. */
+		if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG)
+			msleep(200);
+		usb_lock_device(dev);
+		snoop_urb(dev, NULL, pipe, actlen, i, COMPLETE, NULL, 0);
+	}
+	if (i < 0 && i != -EPIPE) {
+		dev_printk(KERN_DEBUG, &dev->dev, "usbfs: USBDEVFS_CONTROL "
+			   "failed cmd %s rqt %u rq %u len %u ret %d\n",
+			   current->comm, ctrl->bRequestType, ctrl->bRequest,
+			   ctrl->wLength, i);
+	}
+	ret = (i < 0 ? i : actlen);
+
+ done:
+	kfree(dr);
+	usb_free_urb(urb);
+	free_page((unsigned long) tbuf);
+	usbfs_decrease_memory_usage(PAGE_SIZE + sizeof(struct urb) +
+			sizeof(struct usb_ctrlrequest));
+	return ret;
+}
+
+static int proc_control(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_ctrltransfer ctrl;
+
+	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+		return -EFAULT;
+	return do_proc_control(ps, &ctrl);
+}
+
+static int do_proc_bulk(struct usb_dev_state *ps,
+		struct usbdevfs_bulktransfer *bulk)
+{
+	struct usb_device *dev = ps->dev;
+	unsigned int tmo, len1, len2, pipe;
+	unsigned char *tbuf;
+	int i, ret;
+	struct urb *urb = NULL;
+	struct usb_host_endpoint *ep;
+
+	ret = findintfep(ps->dev, bulk->ep);
+	if (ret < 0)
+		return ret;
+	ret = checkintf(ps, ret);
+	if (ret)
+		return ret;
+
+	len1 = bulk->len;
+	if (len1 < 0 || len1 >= (INT_MAX - sizeof(struct urb)))
+		return -EINVAL;
+
+	if (bulk->ep & USB_DIR_IN)
+		pipe = usb_rcvbulkpipe(dev, bulk->ep & 0x7f);
+	else
+		pipe = usb_sndbulkpipe(dev, bulk->ep & 0x7f);
+	ep = usb_pipe_endpoint(dev, pipe);
+	if (!ep || !usb_endpoint_maxp(&ep->desc))
+		return -EINVAL;
+	ret = usbfs_increase_memory_usage(len1 + sizeof(struct urb));
+	if (ret)
+		return ret;
+
+	/*
+	 * len1 can be almost arbitrarily large.  Don't WARN if it's
+	 * too big, just fail the request.
+	 */
+	ret = -ENOMEM;
+	tbuf = kmalloc(len1, GFP_KERNEL | __GFP_NOWARN);
+	if (!tbuf)
+		goto done;
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		goto done;
+
+	if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+			USB_ENDPOINT_XFER_INT) {
+		pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
+		usb_fill_int_urb(urb, dev, pipe, tbuf, len1,
+				NULL, NULL, ep->desc.bInterval);
+	} else {
+		usb_fill_bulk_urb(urb, dev, pipe, tbuf, len1, NULL, NULL);
+	}
+
+	tmo = bulk->timeout;
+	if (bulk->ep & 0x80) {
+		snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, NULL, 0);
+
+		usb_unlock_device(dev);
+		i = usbfs_start_wait_urb(urb, tmo, &len2);
+		usb_lock_device(dev);
+		snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, tbuf, len2);
+
+		if (!i && len2) {
+			if (copy_to_user(bulk->data, tbuf, len2)) {
+				ret = -EFAULT;
+				goto done;
+			}
+		}
+	} else {
+		if (len1) {
+			if (copy_from_user(tbuf, bulk->data, len1)) {
+				ret = -EFAULT;
+				goto done;
+			}
+		}
+		snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, tbuf, len1);
+
+		usb_unlock_device(dev);
+		i = usbfs_start_wait_urb(urb, tmo, &len2);
+		usb_lock_device(dev);
+		snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, NULL, 0);
+	}
+	ret = (i < 0 ? i : len2);
+ done:
+	usb_free_urb(urb);
+	kfree(tbuf);
+	usbfs_decrease_memory_usage(len1 + sizeof(struct urb));
+	return ret;
+}
+
+static int proc_bulk(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_bulktransfer bulk;
+
+	if (copy_from_user(&bulk, arg, sizeof(bulk)))
+		return -EFAULT;
+	return do_proc_bulk(ps, &bulk);
+}
+
+static void check_reset_of_active_ep(struct usb_device *udev,
+		unsigned int epnum, char *ioctl_name)
+{
+	struct usb_host_endpoint **eps;
+	struct usb_host_endpoint *ep;
+
+	eps = (epnum & USB_DIR_IN) ? udev->ep_in : udev->ep_out;
+	ep = eps[epnum & 0x0f];
+	if (ep && !list_empty(&ep->urb_list))
+		dev_warn(&udev->dev, "Process %d (%s) called USBDEVFS_%s for active endpoint 0x%02x\n",
+				task_pid_nr(current), current->comm,
+				ioctl_name, epnum);
+}
+
+static int proc_resetep(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned int ep;
+	int ret;
+
+	if (get_user(ep, (unsigned int __user *)arg))
+		return -EFAULT;
+	ret = findintfep(ps->dev, ep);
+	if (ret < 0)
+		return ret;
+	ret = checkintf(ps, ret);
+	if (ret)
+		return ret;
+	check_reset_of_active_ep(ps->dev, ep, "RESETEP");
+	usb_reset_endpoint(ps->dev, ep);
+	return 0;
+}
+
+static int proc_clearhalt(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned int ep;
+	int pipe;
+	int ret;
+
+	if (get_user(ep, (unsigned int __user *)arg))
+		return -EFAULT;
+	ret = findintfep(ps->dev, ep);
+	if (ret < 0)
+		return ret;
+	ret = checkintf(ps, ret);
+	if (ret)
+		return ret;
+	check_reset_of_active_ep(ps->dev, ep, "CLEAR_HALT");
+	if (ep & USB_DIR_IN)
+		pipe = usb_rcvbulkpipe(ps->dev, ep & 0x7f);
+	else
+		pipe = usb_sndbulkpipe(ps->dev, ep & 0x7f);
+
+	return usb_clear_halt(ps->dev, pipe);
+}
+
+static int proc_getdriver(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_getdriver gd;
+	struct usb_interface *intf;
+	int ret;
+
+	if (copy_from_user(&gd, arg, sizeof(gd)))
+		return -EFAULT;
+	intf = usb_ifnum_to_if(ps->dev, gd.interface);
+	if (!intf || !intf->dev.driver)
+		ret = -ENODATA;
+	else {
+		strscpy(gd.driver, intf->dev.driver->name,
+				sizeof(gd.driver));
+		ret = (copy_to_user(arg, &gd, sizeof(gd)) ? -EFAULT : 0);
+	}
+	return ret;
+}
+
+static int proc_connectinfo(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_connectinfo ci;
+
+	memset(&ci, 0, sizeof(ci));
+	ci.devnum = ps->dev->devnum;
+	ci.slow = ps->dev->speed == USB_SPEED_LOW;
+
+	if (copy_to_user(arg, &ci, sizeof(ci)))
+		return -EFAULT;
+	return 0;
+}
+
+static int proc_conninfo_ex(struct usb_dev_state *ps,
+			    void __user *arg, size_t size)
+{
+	struct usbdevfs_conninfo_ex ci;
+	struct usb_device *udev = ps->dev;
+
+	if (size < sizeof(ci.size))
+		return -EINVAL;
+
+	memset(&ci, 0, sizeof(ci));
+	ci.size = sizeof(ci);
+	ci.busnum = udev->bus->busnum;
+	ci.devnum = udev->devnum;
+	ci.speed = udev->speed;
+
+	while (udev && udev->portnum != 0) {
+		if (++ci.num_ports <= ARRAY_SIZE(ci.ports))
+			ci.ports[ARRAY_SIZE(ci.ports) - ci.num_ports] =
+					udev->portnum;
+		udev = udev->parent;
+	}
+
+	if (ci.num_ports < ARRAY_SIZE(ci.ports))
+		memmove(&ci.ports[0],
+			&ci.ports[ARRAY_SIZE(ci.ports) - ci.num_ports],
+			ci.num_ports);
+
+	if (copy_to_user(arg, &ci, min(sizeof(ci), size)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int proc_resetdevice(struct usb_dev_state *ps)
+{
+	struct usb_host_config *actconfig = ps->dev->actconfig;
+	struct usb_interface *interface;
+	int i, number;
+
+	/* Don't allow a device reset if the process has dropped the
+	 * privilege to do such things and any of the interfaces are
+	 * currently claimed.
+	 */
+	if (ps->privileges_dropped && actconfig) {
+		for (i = 0; i < actconfig->desc.bNumInterfaces; ++i) {
+			interface = actconfig->interface[i];
+			number = interface->cur_altsetting->desc.bInterfaceNumber;
+			if (usb_interface_claimed(interface) &&
+					!test_bit(number, &ps->ifclaimed)) {
+				dev_warn(&ps->dev->dev,
+					"usbfs: interface %d claimed by %s while '%s' resets device\n",
+					number,	interface->dev.driver->name, current->comm);
+				return -EACCES;
+			}
+		}
+	}
+
+	return usb_reset_device(ps->dev);
+}
+
+static int proc_setintf(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_setinterface setintf;
+	int ret;
+
+	if (copy_from_user(&setintf, arg, sizeof(setintf)))
+		return -EFAULT;
+	ret = checkintf(ps, setintf.interface);
+	if (ret)
+		return ret;
+
+	destroy_async_on_interface(ps, setintf.interface);
+
+	return usb_set_interface(ps->dev, setintf.interface,
+			setintf.altsetting);
+}
+
+static int proc_setconfig(struct usb_dev_state *ps, void __user *arg)
+{
+	int u;
+	int status = 0;
+	struct usb_host_config *actconfig;
+
+	if (get_user(u, (int __user *)arg))
+		return -EFAULT;
+
+	actconfig = ps->dev->actconfig;
+
+	/* Don't touch the device if any interfaces are claimed.
+	 * It could interfere with other drivers' operations, and if
+	 * an interface is claimed by usbfs it could easily deadlock.
+	 */
+	if (actconfig) {
+		int i;
+
+		for (i = 0; i < actconfig->desc.bNumInterfaces; ++i) {
+			if (usb_interface_claimed(actconfig->interface[i])) {
+				dev_warn(&ps->dev->dev,
+					"usbfs: interface %d claimed by %s "
+					"while '%s' sets config #%d\n",
+					actconfig->interface[i]
+						->cur_altsetting
+						->desc.bInterfaceNumber,
+					actconfig->interface[i]
+						->dev.driver->name,
+					current->comm, u);
+				status = -EBUSY;
+				break;
+			}
+		}
+	}
+
+	/* SET_CONFIGURATION is often abused as a "cheap" driver reset,
+	 * so avoid usb_set_configuration()'s kick to sysfs
+	 */
+	if (status == 0) {
+		if (actconfig && actconfig->desc.bConfigurationValue == u)
+			status = usb_reset_configuration(ps->dev);
+		else
+			status = usb_set_configuration(ps->dev, u);
+	}
+
+	return status;
+}
+
+static struct usb_memory *
+find_memory_area(struct usb_dev_state *ps, const struct usbdevfs_urb *uurb)
+{
+	struct usb_memory *usbm = NULL, *iter;
+	unsigned long flags;
+	unsigned long uurb_start = (unsigned long)uurb->buffer;
+
+	spin_lock_irqsave(&ps->lock, flags);
+	list_for_each_entry(iter, &ps->memory_list, memlist) {
+		if (uurb_start >= iter->vm_start &&
+				uurb_start < iter->vm_start + iter->size) {
+			if (uurb->buffer_length > iter->vm_start + iter->size -
+					uurb_start) {
+				usbm = ERR_PTR(-EINVAL);
+			} else {
+				usbm = iter;
+				usbm->urb_use_count++;
+			}
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&ps->lock, flags);
+	return usbm;
+}
+
+static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb,
+			struct usbdevfs_iso_packet_desc __user *iso_frame_desc,
+			void __user *arg, sigval_t userurb_sigval)
+{
+	struct usbdevfs_iso_packet_desc *isopkt = NULL;
+	struct usb_host_endpoint *ep;
+	struct async *as = NULL;
+	struct usb_ctrlrequest *dr = NULL;
+	unsigned int u, totlen, isofrmlen;
+	int i, ret, num_sgs = 0, ifnum = -1;
+	int number_of_packets = 0;
+	unsigned int stream_id = 0;
+	void *buf;
+	bool is_in;
+	bool allow_short = false;
+	bool allow_zero = false;
+	unsigned long mask =	USBDEVFS_URB_SHORT_NOT_OK |
+				USBDEVFS_URB_BULK_CONTINUATION |
+				USBDEVFS_URB_NO_FSBR |
+				USBDEVFS_URB_ZERO_PACKET |
+				USBDEVFS_URB_NO_INTERRUPT;
+	/* USBDEVFS_URB_ISO_ASAP is a special case */
+	if (uurb->type == USBDEVFS_URB_TYPE_ISO)
+		mask |= USBDEVFS_URB_ISO_ASAP;
+
+	if (uurb->flags & ~mask)
+			return -EINVAL;
+
+	if ((unsigned int)uurb->buffer_length >= USBFS_XFER_MAX)
+		return -EINVAL;
+	if (uurb->buffer_length > 0 && !uurb->buffer)
+		return -EINVAL;
+	if (!(uurb->type == USBDEVFS_URB_TYPE_CONTROL &&
+	    (uurb->endpoint & ~USB_ENDPOINT_DIR_MASK) == 0)) {
+		ifnum = findintfep(ps->dev, uurb->endpoint);
+		if (ifnum < 0)
+			return ifnum;
+		ret = checkintf(ps, ifnum);
+		if (ret)
+			return ret;
+	}
+	ep = ep_to_host_endpoint(ps->dev, uurb->endpoint);
+	if (!ep)
+		return -ENOENT;
+	is_in = (uurb->endpoint & USB_ENDPOINT_DIR_MASK) != 0;
+
+	u = 0;
+	switch (uurb->type) {
+	case USBDEVFS_URB_TYPE_CONTROL:
+		if (!usb_endpoint_xfer_control(&ep->desc))
+			return -EINVAL;
+		/* min 8 byte setup packet */
+		if (uurb->buffer_length < 8)
+			return -EINVAL;
+		dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+		if (!dr)
+			return -ENOMEM;
+		if (copy_from_user(dr, uurb->buffer, 8)) {
+			ret = -EFAULT;
+			goto error;
+		}
+		if (uurb->buffer_length < (le16_to_cpu(dr->wLength) + 8)) {
+			ret = -EINVAL;
+			goto error;
+		}
+		ret = check_ctrlrecip(ps, dr->bRequestType, dr->bRequest,
+				      le16_to_cpu(dr->wIndex));
+		if (ret)
+			goto error;
+		uurb->buffer_length = le16_to_cpu(dr->wLength);
+		uurb->buffer += 8;
+		if ((dr->bRequestType & USB_DIR_IN) && uurb->buffer_length) {
+			is_in = true;
+			uurb->endpoint |= USB_DIR_IN;
+		} else {
+			is_in = false;
+			uurb->endpoint &= ~USB_DIR_IN;
+		}
+		if (is_in)
+			allow_short = true;
+		snoop(&ps->dev->dev, "control urb: bRequestType=%02x "
+			"bRequest=%02x wValue=%04x "
+			"wIndex=%04x wLength=%04x\n",
+			dr->bRequestType, dr->bRequest,
+			__le16_to_cpu(dr->wValue),
+			__le16_to_cpu(dr->wIndex),
+			__le16_to_cpu(dr->wLength));
+		u = sizeof(struct usb_ctrlrequest);
+		break;
+
+	case USBDEVFS_URB_TYPE_BULK:
+		if (!is_in)
+			allow_zero = true;
+		else
+			allow_short = true;
+		switch (usb_endpoint_type(&ep->desc)) {
+		case USB_ENDPOINT_XFER_CONTROL:
+		case USB_ENDPOINT_XFER_ISOC:
+			return -EINVAL;
+		case USB_ENDPOINT_XFER_INT:
+			/* allow single-shot interrupt transfers */
+			uurb->type = USBDEVFS_URB_TYPE_INTERRUPT;
+			goto interrupt_urb;
+		}
+		num_sgs = DIV_ROUND_UP(uurb->buffer_length, USB_SG_SIZE);
+		if (num_sgs == 1 || num_sgs > ps->dev->bus->sg_tablesize)
+			num_sgs = 0;
+		if (ep->streams)
+			stream_id = uurb->stream_id;
+		break;
+
+	case USBDEVFS_URB_TYPE_INTERRUPT:
+		if (!usb_endpoint_xfer_int(&ep->desc))
+			return -EINVAL;
+ interrupt_urb:
+		if (!is_in)
+			allow_zero = true;
+		else
+			allow_short = true;
+		break;
+
+	case USBDEVFS_URB_TYPE_ISO:
+		/* arbitrary limit */
+		if (uurb->number_of_packets < 1 ||
+		    uurb->number_of_packets > 128)
+			return -EINVAL;
+		if (!usb_endpoint_xfer_isoc(&ep->desc))
+			return -EINVAL;
+		number_of_packets = uurb->number_of_packets;
+		isofrmlen = sizeof(struct usbdevfs_iso_packet_desc) *
+				   number_of_packets;
+		isopkt = memdup_user(iso_frame_desc, isofrmlen);
+		if (IS_ERR(isopkt)) {
+			ret = PTR_ERR(isopkt);
+			isopkt = NULL;
+			goto error;
+		}
+		for (totlen = u = 0; u < number_of_packets; u++) {
+			/*
+			 * arbitrary limit need for USB 3.1 Gen2
+			 * sizemax: 96 DPs at SSP, 96 * 1024 = 98304
+			 */
+			if (isopkt[u].length > 98304) {
+				ret = -EINVAL;
+				goto error;
+			}
+			totlen += isopkt[u].length;
+		}
+		u *= sizeof(struct usb_iso_packet_descriptor);
+		uurb->buffer_length = totlen;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (uurb->buffer_length > 0 &&
+			!access_ok(uurb->buffer, uurb->buffer_length)) {
+		ret = -EFAULT;
+		goto error;
+	}
+	as = alloc_async(number_of_packets);
+	if (!as) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	as->usbm = find_memory_area(ps, uurb);
+	if (IS_ERR(as->usbm)) {
+		ret = PTR_ERR(as->usbm);
+		as->usbm = NULL;
+		goto error;
+	}
+
+	/* do not use SG buffers when memory mapped segments
+	 * are in use
+	 */
+	if (as->usbm)
+		num_sgs = 0;
+
+	u += sizeof(struct async) + sizeof(struct urb) +
+	     (as->usbm ? 0 : uurb->buffer_length) +
+	     num_sgs * sizeof(struct scatterlist);
+	ret = usbfs_increase_memory_usage(u);
+	if (ret)
+		goto error;
+	as->mem_usage = u;
+
+	if (num_sgs) {
+		as->urb->sg = kmalloc_array(num_sgs,
+					    sizeof(struct scatterlist),
+					    GFP_KERNEL | __GFP_NOWARN);
+		if (!as->urb->sg) {
+			ret = -ENOMEM;
+			goto error;
+		}
+		as->urb->num_sgs = num_sgs;
+		sg_init_table(as->urb->sg, as->urb->num_sgs);
+
+		totlen = uurb->buffer_length;
+		for (i = 0; i < as->urb->num_sgs; i++) {
+			u = (totlen > USB_SG_SIZE) ? USB_SG_SIZE : totlen;
+			buf = kmalloc(u, GFP_KERNEL);
+			if (!buf) {
+				ret = -ENOMEM;
+				goto error;
+			}
+			sg_set_buf(&as->urb->sg[i], buf, u);
+
+			if (!is_in) {
+				if (copy_from_user(buf, uurb->buffer, u)) {
+					ret = -EFAULT;
+					goto error;
+				}
+				uurb->buffer += u;
+			}
+			totlen -= u;
+		}
+	} else if (uurb->buffer_length > 0) {
+		if (as->usbm) {
+			unsigned long uurb_start = (unsigned long)uurb->buffer;
+
+			as->urb->transfer_buffer = as->usbm->mem +
+					(uurb_start - as->usbm->vm_start);
+		} else {
+			as->urb->transfer_buffer = kmalloc(uurb->buffer_length,
+					GFP_KERNEL | __GFP_NOWARN);
+			if (!as->urb->transfer_buffer) {
+				ret = -ENOMEM;
+				goto error;
+			}
+			if (!is_in) {
+				if (copy_from_user(as->urb->transfer_buffer,
+						   uurb->buffer,
+						   uurb->buffer_length)) {
+					ret = -EFAULT;
+					goto error;
+				}
+			} else if (uurb->type == USBDEVFS_URB_TYPE_ISO) {
+				/*
+				 * Isochronous input data may end up being
+				 * discontiguous if some of the packets are
+				 * short. Clear the buffer so that the gaps
+				 * don't leak kernel data to userspace.
+				 */
+				memset(as->urb->transfer_buffer, 0,
+						uurb->buffer_length);
+			}
+		}
+	}
+	as->urb->dev = ps->dev;
+	as->urb->pipe = (uurb->type << 30) |
+			__create_pipe(ps->dev, uurb->endpoint & 0xf) |
+			(uurb->endpoint & USB_DIR_IN);
+
+	/* This tedious sequence is necessary because the URB_* flags
+	 * are internal to the kernel and subject to change, whereas
+	 * the USBDEVFS_URB_* flags are a user API and must not be changed.
+	 */
+	u = (is_in ? URB_DIR_IN : URB_DIR_OUT);
+	if (uurb->flags & USBDEVFS_URB_ISO_ASAP)
+		u |= URB_ISO_ASAP;
+	if (allow_short && uurb->flags & USBDEVFS_URB_SHORT_NOT_OK)
+		u |= URB_SHORT_NOT_OK;
+	if (allow_zero && uurb->flags & USBDEVFS_URB_ZERO_PACKET)
+		u |= URB_ZERO_PACKET;
+	if (uurb->flags & USBDEVFS_URB_NO_INTERRUPT)
+		u |= URB_NO_INTERRUPT;
+	as->urb->transfer_flags = u;
+
+	if (!allow_short && uurb->flags & USBDEVFS_URB_SHORT_NOT_OK)
+		dev_warn(&ps->dev->dev, "Requested nonsensical USBDEVFS_URB_SHORT_NOT_OK.\n");
+	if (!allow_zero && uurb->flags & USBDEVFS_URB_ZERO_PACKET)
+		dev_warn(&ps->dev->dev, "Requested nonsensical USBDEVFS_URB_ZERO_PACKET.\n");
+
+	as->urb->transfer_buffer_length = uurb->buffer_length;
+	as->urb->setup_packet = (unsigned char *)dr;
+	dr = NULL;
+	as->urb->start_frame = uurb->start_frame;
+	as->urb->number_of_packets = number_of_packets;
+	as->urb->stream_id = stream_id;
+
+	if (ep->desc.bInterval) {
+		if (uurb->type == USBDEVFS_URB_TYPE_ISO ||
+				ps->dev->speed == USB_SPEED_HIGH ||
+				ps->dev->speed >= USB_SPEED_SUPER)
+			as->urb->interval = 1 <<
+					min(15, ep->desc.bInterval - 1);
+		else
+			as->urb->interval = ep->desc.bInterval;
+	}
+
+	as->urb->context = as;
+	as->urb->complete = async_completed;
+	for (totlen = u = 0; u < number_of_packets; u++) {
+		as->urb->iso_frame_desc[u].offset = totlen;
+		as->urb->iso_frame_desc[u].length = isopkt[u].length;
+		totlen += isopkt[u].length;
+	}
+	kfree(isopkt);
+	isopkt = NULL;
+	as->ps = ps;
+	as->userurb = arg;
+	as->userurb_sigval = userurb_sigval;
+	if (as->usbm) {
+		unsigned long uurb_start = (unsigned long)uurb->buffer;
+
+		as->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+		as->urb->transfer_dma = as->usbm->dma_handle +
+				(uurb_start - as->usbm->vm_start);
+	} else if (is_in && uurb->buffer_length > 0)
+		as->userbuffer = uurb->buffer;
+	as->signr = uurb->signr;
+	as->ifnum = ifnum;
+	as->pid = get_pid(task_pid(current));
+	as->cred = get_current_cred();
+	snoop_urb(ps->dev, as->userurb, as->urb->pipe,
+			as->urb->transfer_buffer_length, 0, SUBMIT,
+			NULL, 0);
+	if (!is_in)
+		snoop_urb_data(as->urb, as->urb->transfer_buffer_length);
+
+	async_newpending(as);
+
+	if (usb_endpoint_xfer_bulk(&ep->desc)) {
+		spin_lock_irq(&ps->lock);
+
+		/* Not exactly the endpoint address; the direction bit is
+		 * shifted to the 0x10 position so that the value will be
+		 * between 0 and 31.
+		 */
+		as->bulk_addr = usb_endpoint_num(&ep->desc) |
+			((ep->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+				>> 3);
+
+		/* If this bulk URB is the start of a new transfer, re-enable
+		 * the endpoint.  Otherwise mark it as a continuation URB.
+		 */
+		if (uurb->flags & USBDEVFS_URB_BULK_CONTINUATION)
+			as->bulk_status = AS_CONTINUATION;
+		else
+			ps->disabled_bulk_eps &= ~(1 << as->bulk_addr);
+
+		/* Don't accept continuation URBs if the endpoint is
+		 * disabled because of an earlier error.
+		 */
+		if (ps->disabled_bulk_eps & (1 << as->bulk_addr))
+			ret = -EREMOTEIO;
+		else
+			ret = usb_submit_urb(as->urb, GFP_ATOMIC);
+		spin_unlock_irq(&ps->lock);
+	} else {
+		ret = usb_submit_urb(as->urb, GFP_KERNEL);
+	}
+
+	if (ret) {
+		dev_printk(KERN_DEBUG, &ps->dev->dev,
+			   "usbfs: usb_submit_urb returned %d\n", ret);
+		snoop_urb(ps->dev, as->userurb, as->urb->pipe,
+				0, ret, COMPLETE, NULL, 0);
+		async_removepending(as);
+		goto error;
+	}
+	return 0;
+
+ error:
+	kfree(isopkt);
+	kfree(dr);
+	if (as)
+		free_async(as);
+	return ret;
+}
+
+static int proc_submiturb(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_urb uurb;
+	sigval_t userurb_sigval;
+
+	if (copy_from_user(&uurb, arg, sizeof(uurb)))
+		return -EFAULT;
+
+	memset(&userurb_sigval, 0, sizeof(userurb_sigval));
+	userurb_sigval.sival_ptr = arg;
+
+	return proc_do_submiturb(ps, &uurb,
+			(((struct usbdevfs_urb __user *)arg)->iso_frame_desc),
+			arg, userurb_sigval);
+}
+
+static int proc_unlinkurb(struct usb_dev_state *ps, void __user *arg)
+{
+	struct urb *urb;
+	struct async *as;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ps->lock, flags);
+	as = async_getpending(ps, arg);
+	if (!as) {
+		spin_unlock_irqrestore(&ps->lock, flags);
+		return -EINVAL;
+	}
+
+	urb = as->urb;
+	usb_get_urb(urb);
+	spin_unlock_irqrestore(&ps->lock, flags);
+
+	usb_kill_urb(urb);
+	usb_put_urb(urb);
+
+	return 0;
+}
+
+static void compute_isochronous_actual_length(struct urb *urb)
+{
+	unsigned int i;
+
+	if (urb->number_of_packets > 0) {
+		urb->actual_length = 0;
+		for (i = 0; i < urb->number_of_packets; i++)
+			urb->actual_length +=
+					urb->iso_frame_desc[i].actual_length;
+	}
+}
+
+static int processcompl(struct async *as, void __user * __user *arg)
+{
+	struct urb *urb = as->urb;
+	struct usbdevfs_urb __user *userurb = as->userurb;
+	void __user *addr = as->userurb;
+	unsigned int i;
+
+	compute_isochronous_actual_length(urb);
+	if (as->userbuffer && urb->actual_length) {
+		if (copy_urb_data_to_user(as->userbuffer, urb))
+			goto err_out;
+	}
+	if (put_user(as->status, &userurb->status))
+		goto err_out;
+	if (put_user(urb->actual_length, &userurb->actual_length))
+		goto err_out;
+	if (put_user(urb->error_count, &userurb->error_count))
+		goto err_out;
+
+	if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
+		for (i = 0; i < urb->number_of_packets; i++) {
+			if (put_user(urb->iso_frame_desc[i].actual_length,
+				     &userurb->iso_frame_desc[i].actual_length))
+				goto err_out;
+			if (put_user(urb->iso_frame_desc[i].status,
+				     &userurb->iso_frame_desc[i].status))
+				goto err_out;
+		}
+	}
+
+	if (put_user(addr, (void __user * __user *)arg))
+		return -EFAULT;
+	return 0;
+
+err_out:
+	return -EFAULT;
+}
+
+static struct async *reap_as(struct usb_dev_state *ps)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	struct async *as = NULL;
+	struct usb_device *dev = ps->dev;
+
+	add_wait_queue(&ps->wait, &wait);
+	for (;;) {
+		__set_current_state(TASK_INTERRUPTIBLE);
+		as = async_getcompleted(ps);
+		if (as || !connected(ps))
+			break;
+		if (signal_pending(current))
+			break;
+		usb_unlock_device(dev);
+		schedule();
+		usb_lock_device(dev);
+	}
+	remove_wait_queue(&ps->wait, &wait);
+	set_current_state(TASK_RUNNING);
+	return as;
+}
+
+static int proc_reapurb(struct usb_dev_state *ps, void __user *arg)
+{
+	struct async *as = reap_as(ps);
+
+	if (as) {
+		int retval;
+
+		snoop(&ps->dev->dev, "reap %px\n", as->userurb);
+		retval = processcompl(as, (void __user * __user *)arg);
+		free_async(as);
+		return retval;
+	}
+	if (signal_pending(current))
+		return -EINTR;
+	return -ENODEV;
+}
+
+static int proc_reapurbnonblock(struct usb_dev_state *ps, void __user *arg)
+{
+	int retval;
+	struct async *as;
+
+	as = async_getcompleted(ps);
+	if (as) {
+		snoop(&ps->dev->dev, "reap %px\n", as->userurb);
+		retval = processcompl(as, (void __user * __user *)arg);
+		free_async(as);
+	} else {
+		retval = (connected(ps) ? -EAGAIN : -ENODEV);
+	}
+	return retval;
+}
+
+#ifdef CONFIG_COMPAT
+static int proc_control_compat(struct usb_dev_state *ps,
+				struct usbdevfs_ctrltransfer32 __user *p32)
+{
+	struct usbdevfs_ctrltransfer ctrl;
+	u32 udata;
+
+	if (copy_from_user(&ctrl, p32, sizeof(*p32) - sizeof(compat_caddr_t)) ||
+	    get_user(udata, &p32->data))
+		return -EFAULT;
+	ctrl.data = compat_ptr(udata);
+	return do_proc_control(ps, &ctrl);
+}
+
+static int proc_bulk_compat(struct usb_dev_state *ps,
+			struct usbdevfs_bulktransfer32 __user *p32)
+{
+	struct usbdevfs_bulktransfer bulk;
+	compat_caddr_t addr;
+
+	if (get_user(bulk.ep, &p32->ep) ||
+	    get_user(bulk.len, &p32->len) ||
+	    get_user(bulk.timeout, &p32->timeout) ||
+	    get_user(addr, &p32->data))
+		return -EFAULT;
+	bulk.data = compat_ptr(addr);
+	return do_proc_bulk(ps, &bulk);
+}
+
+static int proc_disconnectsignal_compat(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_disconnectsignal32 ds;
+
+	if (copy_from_user(&ds, arg, sizeof(ds)))
+		return -EFAULT;
+	ps->discsignr = ds.signr;
+	ps->disccontext.sival_int = ds.context;
+	return 0;
+}
+
+static int get_urb32(struct usbdevfs_urb *kurb,
+		     struct usbdevfs_urb32 __user *uurb)
+{
+	struct usbdevfs_urb32 urb32;
+	if (copy_from_user(&urb32, uurb, sizeof(*uurb)))
+		return -EFAULT;
+	kurb->type = urb32.type;
+	kurb->endpoint = urb32.endpoint;
+	kurb->status = urb32.status;
+	kurb->flags = urb32.flags;
+	kurb->buffer = compat_ptr(urb32.buffer);
+	kurb->buffer_length = urb32.buffer_length;
+	kurb->actual_length = urb32.actual_length;
+	kurb->start_frame = urb32.start_frame;
+	kurb->number_of_packets = urb32.number_of_packets;
+	kurb->error_count = urb32.error_count;
+	kurb->signr = urb32.signr;
+	kurb->usercontext = compat_ptr(urb32.usercontext);
+	return 0;
+}
+
+static int proc_submiturb_compat(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_urb uurb;
+	sigval_t userurb_sigval;
+
+	if (get_urb32(&uurb, (struct usbdevfs_urb32 __user *)arg))
+		return -EFAULT;
+
+	memset(&userurb_sigval, 0, sizeof(userurb_sigval));
+	userurb_sigval.sival_int = ptr_to_compat(arg);
+
+	return proc_do_submiturb(ps, &uurb,
+			((struct usbdevfs_urb32 __user *)arg)->iso_frame_desc,
+			arg, userurb_sigval);
+}
+
+static int processcompl_compat(struct async *as, void __user * __user *arg)
+{
+	struct urb *urb = as->urb;
+	struct usbdevfs_urb32 __user *userurb = as->userurb;
+	void __user *addr = as->userurb;
+	unsigned int i;
+
+	compute_isochronous_actual_length(urb);
+	if (as->userbuffer && urb->actual_length) {
+		if (copy_urb_data_to_user(as->userbuffer, urb))
+			return -EFAULT;
+	}
+	if (put_user(as->status, &userurb->status))
+		return -EFAULT;
+	if (put_user(urb->actual_length, &userurb->actual_length))
+		return -EFAULT;
+	if (put_user(urb->error_count, &userurb->error_count))
+		return -EFAULT;
+
+	if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
+		for (i = 0; i < urb->number_of_packets; i++) {
+			if (put_user(urb->iso_frame_desc[i].actual_length,
+				     &userurb->iso_frame_desc[i].actual_length))
+				return -EFAULT;
+			if (put_user(urb->iso_frame_desc[i].status,
+				     &userurb->iso_frame_desc[i].status))
+				return -EFAULT;
+		}
+	}
+
+	if (put_user(ptr_to_compat(addr), (u32 __user *)arg))
+		return -EFAULT;
+	return 0;
+}
+
+static int proc_reapurb_compat(struct usb_dev_state *ps, void __user *arg)
+{
+	struct async *as = reap_as(ps);
+
+	if (as) {
+		int retval;
+
+		snoop(&ps->dev->dev, "reap %px\n", as->userurb);
+		retval = processcompl_compat(as, (void __user * __user *)arg);
+		free_async(as);
+		return retval;
+	}
+	if (signal_pending(current))
+		return -EINTR;
+	return -ENODEV;
+}
+
+static int proc_reapurbnonblock_compat(struct usb_dev_state *ps, void __user *arg)
+{
+	int retval;
+	struct async *as;
+
+	as = async_getcompleted(ps);
+	if (as) {
+		snoop(&ps->dev->dev, "reap %px\n", as->userurb);
+		retval = processcompl_compat(as, (void __user * __user *)arg);
+		free_async(as);
+	} else {
+		retval = (connected(ps) ? -EAGAIN : -ENODEV);
+	}
+	return retval;
+}
+
+
+#endif
+
+static int proc_disconnectsignal(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_disconnectsignal ds;
+
+	if (copy_from_user(&ds, arg, sizeof(ds)))
+		return -EFAULT;
+	ps->discsignr = ds.signr;
+	ps->disccontext.sival_ptr = ds.context;
+	return 0;
+}
+
+static int proc_claiminterface(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned int ifnum;
+
+	if (get_user(ifnum, (unsigned int __user *)arg))
+		return -EFAULT;
+	return claimintf(ps, ifnum);
+}
+
+static int proc_releaseinterface(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned int ifnum;
+	int ret;
+
+	if (get_user(ifnum, (unsigned int __user *)arg))
+		return -EFAULT;
+	ret = releaseintf(ps, ifnum);
+	if (ret < 0)
+		return ret;
+	destroy_async_on_interface(ps, ifnum);
+	return 0;
+}
+
+static int proc_ioctl(struct usb_dev_state *ps, struct usbdevfs_ioctl *ctl)
+{
+	int			size;
+	void			*buf = NULL;
+	int			retval = 0;
+	struct usb_interface    *intf = NULL;
+	struct usb_driver       *driver = NULL;
+
+	if (ps->privileges_dropped)
+		return -EACCES;
+
+	if (!connected(ps))
+		return -ENODEV;
+
+	/* alloc buffer */
+	size = _IOC_SIZE(ctl->ioctl_code);
+	if (size > 0) {
+		buf = kmalloc(size, GFP_KERNEL);
+		if (buf == NULL)
+			return -ENOMEM;
+		if ((_IOC_DIR(ctl->ioctl_code) & _IOC_WRITE)) {
+			if (copy_from_user(buf, ctl->data, size)) {
+				kfree(buf);
+				return -EFAULT;
+			}
+		} else {
+			memset(buf, 0, size);
+		}
+	}
+
+	if (ps->dev->state != USB_STATE_CONFIGURED)
+		retval = -EHOSTUNREACH;
+	else if (!(intf = usb_ifnum_to_if(ps->dev, ctl->ifno)))
+		retval = -EINVAL;
+	else switch (ctl->ioctl_code) {
+
+	/* disconnect kernel driver from interface */
+	case USBDEVFS_DISCONNECT:
+		if (intf->dev.driver) {
+			driver = to_usb_driver(intf->dev.driver);
+			dev_dbg(&intf->dev, "disconnect by usbfs\n");
+			usb_driver_release_interface(driver, intf);
+		} else
+			retval = -ENODATA;
+		break;
+
+	/* let kernel drivers try to (re)bind to the interface */
+	case USBDEVFS_CONNECT:
+		if (!intf->dev.driver)
+			retval = device_attach(&intf->dev);
+		else
+			retval = -EBUSY;
+		break;
+
+	/* talk directly to the interface's driver */
+	default:
+		if (intf->dev.driver)
+			driver = to_usb_driver(intf->dev.driver);
+		if (driver == NULL || driver->unlocked_ioctl == NULL) {
+			retval = -ENOTTY;
+		} else {
+			retval = driver->unlocked_ioctl(intf, ctl->ioctl_code, buf);
+			if (retval == -ENOIOCTLCMD)
+				retval = -ENOTTY;
+		}
+	}
+
+	/* cleanup and return */
+	if (retval >= 0
+			&& (_IOC_DIR(ctl->ioctl_code) & _IOC_READ) != 0
+			&& size > 0
+			&& copy_to_user(ctl->data, buf, size) != 0)
+		retval = -EFAULT;
+
+	kfree(buf);
+	return retval;
+}
+
+static int proc_ioctl_default(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_ioctl	ctrl;
+
+	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+		return -EFAULT;
+	return proc_ioctl(ps, &ctrl);
+}
+
+#ifdef CONFIG_COMPAT
+static int proc_ioctl_compat(struct usb_dev_state *ps, compat_uptr_t arg)
+{
+	struct usbdevfs_ioctl32 ioc32;
+	struct usbdevfs_ioctl ctrl;
+
+	if (copy_from_user(&ioc32, compat_ptr(arg), sizeof(ioc32)))
+		return -EFAULT;
+	ctrl.ifno = ioc32.ifno;
+	ctrl.ioctl_code = ioc32.ioctl_code;
+	ctrl.data = compat_ptr(ioc32.data);
+	return proc_ioctl(ps, &ctrl);
+}
+#endif
+
+static int proc_claim_port(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned portnum;
+	int rc;
+
+	if (get_user(portnum, (unsigned __user *) arg))
+		return -EFAULT;
+	rc = usb_hub_claim_port(ps->dev, portnum, ps);
+	if (rc == 0)
+		snoop(&ps->dev->dev, "port %d claimed by process %d: %s\n",
+			portnum, task_pid_nr(current), current->comm);
+	return rc;
+}
+
+static int proc_release_port(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned portnum;
+
+	if (get_user(portnum, (unsigned __user *) arg))
+		return -EFAULT;
+	return usb_hub_release_port(ps->dev, portnum, ps);
+}
+
+static int proc_get_capabilities(struct usb_dev_state *ps, void __user *arg)
+{
+	__u32 caps;
+
+	caps = USBDEVFS_CAP_ZERO_PACKET | USBDEVFS_CAP_NO_PACKET_SIZE_LIM |
+			USBDEVFS_CAP_REAP_AFTER_DISCONNECT | USBDEVFS_CAP_MMAP |
+			USBDEVFS_CAP_DROP_PRIVILEGES |
+			USBDEVFS_CAP_CONNINFO_EX | MAYBE_CAP_SUSPEND;
+	if (!ps->dev->bus->no_stop_on_short)
+		caps |= USBDEVFS_CAP_BULK_CONTINUATION;
+	if (ps->dev->bus->sg_tablesize)
+		caps |= USBDEVFS_CAP_BULK_SCATTER_GATHER;
+
+	if (put_user(caps, (__u32 __user *)arg))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int proc_disconnect_claim(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_disconnect_claim dc;
+	struct usb_interface *intf;
+
+	if (copy_from_user(&dc, arg, sizeof(dc)))
+		return -EFAULT;
+
+	intf = usb_ifnum_to_if(ps->dev, dc.interface);
+	if (!intf)
+		return -EINVAL;
+
+	if (intf->dev.driver) {
+		struct usb_driver *driver = to_usb_driver(intf->dev.driver);
+
+		if (ps->privileges_dropped)
+			return -EACCES;
+
+		if ((dc.flags & USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER) &&
+				strncmp(dc.driver, intf->dev.driver->name,
+					sizeof(dc.driver)) != 0)
+			return -EBUSY;
+
+		if ((dc.flags & USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER) &&
+				strncmp(dc.driver, intf->dev.driver->name,
+					sizeof(dc.driver)) == 0)
+			return -EBUSY;
+
+		dev_dbg(&intf->dev, "disconnect by usbfs\n");
+		usb_driver_release_interface(driver, intf);
+	}
+
+	return claimintf(ps, dc.interface);
+}
+
+static int proc_alloc_streams(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned num_streams, num_eps;
+	struct usb_host_endpoint **eps;
+	struct usb_interface *intf;
+	int r;
+
+	r = parse_usbdevfs_streams(ps, arg, &num_streams, &num_eps,
+				   &eps, &intf);
+	if (r)
+		return r;
+
+	destroy_async_on_interface(ps,
+				   intf->altsetting[0].desc.bInterfaceNumber);
+
+	r = usb_alloc_streams(intf, eps, num_eps, num_streams, GFP_KERNEL);
+	kfree(eps);
+	return r;
+}
+
+static int proc_free_streams(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned num_eps;
+	struct usb_host_endpoint **eps;
+	struct usb_interface *intf;
+	int r;
+
+	r = parse_usbdevfs_streams(ps, arg, NULL, &num_eps, &eps, &intf);
+	if (r)
+		return r;
+
+	destroy_async_on_interface(ps,
+				   intf->altsetting[0].desc.bInterfaceNumber);
+
+	r = usb_free_streams(intf, eps, num_eps, GFP_KERNEL);
+	kfree(eps);
+	return r;
+}
+
+static int proc_drop_privileges(struct usb_dev_state *ps, void __user *arg)
+{
+	u32 data;
+
+	if (copy_from_user(&data, arg, sizeof(data)))
+		return -EFAULT;
+
+	/* This is a one way operation. Once privileges are
+	 * dropped, you cannot regain them. You may however reissue
+	 * this ioctl to shrink the allowed interfaces mask.
+	 */
+	ps->interface_allowed_mask &= data;
+	ps->privileges_dropped = true;
+
+	return 0;
+}
+
+static int proc_forbid_suspend(struct usb_dev_state *ps)
+{
+	int ret = 0;
+
+	if (ps->suspend_allowed) {
+		ret = usb_autoresume_device(ps->dev);
+		if (ret == 0)
+			ps->suspend_allowed = false;
+		else if (ret != -ENODEV)
+			ret = -EIO;
+	}
+	return ret;
+}
+
+static int proc_allow_suspend(struct usb_dev_state *ps)
+{
+	if (!connected(ps))
+		return -ENODEV;
+
+	WRITE_ONCE(ps->not_yet_resumed, 1);
+	if (!ps->suspend_allowed) {
+		usb_autosuspend_device(ps->dev);
+		ps->suspend_allowed = true;
+	}
+	return 0;
+}
+
+static int proc_wait_for_resume(struct usb_dev_state *ps)
+{
+	int ret;
+
+	usb_unlock_device(ps->dev);
+	ret = wait_event_interruptible(ps->wait_for_resume,
+			READ_ONCE(ps->not_yet_resumed) == 0);
+	usb_lock_device(ps->dev);
+
+	if (ret != 0)
+		return -EINTR;
+	return proc_forbid_suspend(ps);
+}
+
+/*
+ * NOTE:  All requests here that have interface numbers as parameters
+ * are assuming that somehow the configuration has been prevented from
+ * changing.  But there's no mechanism to ensure that...
+ */
+static long usbdev_do_ioctl(struct file *file, unsigned int cmd,
+				void __user *p)
+{
+	struct usb_dev_state *ps = file->private_data;
+	struct inode *inode = file_inode(file);
+	struct usb_device *dev = ps->dev;
+	int ret = -ENOTTY;
+
+	if (!(file->f_mode & FMODE_WRITE))
+		return -EPERM;
+
+	usb_lock_device(dev);
+
+	/* Reap operations are allowed even after disconnection */
+	switch (cmd) {
+	case USBDEVFS_REAPURB:
+		snoop(&dev->dev, "%s: REAPURB\n", __func__);
+		ret = proc_reapurb(ps, p);
+		goto done;
+
+	case USBDEVFS_REAPURBNDELAY:
+		snoop(&dev->dev, "%s: REAPURBNDELAY\n", __func__);
+		ret = proc_reapurbnonblock(ps, p);
+		goto done;
+
+#ifdef CONFIG_COMPAT
+	case USBDEVFS_REAPURB32:
+		snoop(&dev->dev, "%s: REAPURB32\n", __func__);
+		ret = proc_reapurb_compat(ps, p);
+		goto done;
+
+	case USBDEVFS_REAPURBNDELAY32:
+		snoop(&dev->dev, "%s: REAPURBNDELAY32\n", __func__);
+		ret = proc_reapurbnonblock_compat(ps, p);
+		goto done;
+#endif
+	}
+
+	if (!connected(ps)) {
+		usb_unlock_device(dev);
+		return -ENODEV;
+	}
+
+	switch (cmd) {
+	case USBDEVFS_CONTROL:
+		snoop(&dev->dev, "%s: CONTROL\n", __func__);
+		ret = proc_control(ps, p);
+		if (ret >= 0)
+			inode->i_mtime = current_time(inode);
+		break;
+
+	case USBDEVFS_BULK:
+		snoop(&dev->dev, "%s: BULK\n", __func__);
+		ret = proc_bulk(ps, p);
+		if (ret >= 0)
+			inode->i_mtime = current_time(inode);
+		break;
+
+	case USBDEVFS_RESETEP:
+		snoop(&dev->dev, "%s: RESETEP\n", __func__);
+		ret = proc_resetep(ps, p);
+		if (ret >= 0)
+			inode->i_mtime = current_time(inode);
+		break;
+
+	case USBDEVFS_RESET:
+		snoop(&dev->dev, "%s: RESET\n", __func__);
+		ret = proc_resetdevice(ps);
+		break;
+
+	case USBDEVFS_CLEAR_HALT:
+		snoop(&dev->dev, "%s: CLEAR_HALT\n", __func__);
+		ret = proc_clearhalt(ps, p);
+		if (ret >= 0)
+			inode->i_mtime = current_time(inode);
+		break;
+
+	case USBDEVFS_GETDRIVER:
+		snoop(&dev->dev, "%s: GETDRIVER\n", __func__);
+		ret = proc_getdriver(ps, p);
+		break;
+
+	case USBDEVFS_CONNECTINFO:
+		snoop(&dev->dev, "%s: CONNECTINFO\n", __func__);
+		ret = proc_connectinfo(ps, p);
+		break;
+
+	case USBDEVFS_SETINTERFACE:
+		snoop(&dev->dev, "%s: SETINTERFACE\n", __func__);
+		ret = proc_setintf(ps, p);
+		break;
+
+	case USBDEVFS_SETCONFIGURATION:
+		snoop(&dev->dev, "%s: SETCONFIGURATION\n", __func__);
+		ret = proc_setconfig(ps, p);
+		break;
+
+	case USBDEVFS_SUBMITURB:
+		snoop(&dev->dev, "%s: SUBMITURB\n", __func__);
+		ret = proc_submiturb(ps, p);
+		if (ret >= 0)
+			inode->i_mtime = current_time(inode);
+		break;
+
+#ifdef CONFIG_COMPAT
+	case USBDEVFS_CONTROL32:
+		snoop(&dev->dev, "%s: CONTROL32\n", __func__);
+		ret = proc_control_compat(ps, p);
+		if (ret >= 0)
+			inode->i_mtime = current_time(inode);
+		break;
+
+	case USBDEVFS_BULK32:
+		snoop(&dev->dev, "%s: BULK32\n", __func__);
+		ret = proc_bulk_compat(ps, p);
+		if (ret >= 0)
+			inode->i_mtime = current_time(inode);
+		break;
+
+	case USBDEVFS_DISCSIGNAL32:
+		snoop(&dev->dev, "%s: DISCSIGNAL32\n", __func__);
+		ret = proc_disconnectsignal_compat(ps, p);
+		break;
+
+	case USBDEVFS_SUBMITURB32:
+		snoop(&dev->dev, "%s: SUBMITURB32\n", __func__);
+		ret = proc_submiturb_compat(ps, p);
+		if (ret >= 0)
+			inode->i_mtime = current_time(inode);
+		break;
+
+	case USBDEVFS_IOCTL32:
+		snoop(&dev->dev, "%s: IOCTL32\n", __func__);
+		ret = proc_ioctl_compat(ps, ptr_to_compat(p));
+		break;
+#endif
+
+	case USBDEVFS_DISCARDURB:
+		snoop(&dev->dev, "%s: DISCARDURB %px\n", __func__, p);
+		ret = proc_unlinkurb(ps, p);
+		break;
+
+	case USBDEVFS_DISCSIGNAL:
+		snoop(&dev->dev, "%s: DISCSIGNAL\n", __func__);
+		ret = proc_disconnectsignal(ps, p);
+		break;
+
+	case USBDEVFS_CLAIMINTERFACE:
+		snoop(&dev->dev, "%s: CLAIMINTERFACE\n", __func__);
+		ret = proc_claiminterface(ps, p);
+		break;
+
+	case USBDEVFS_RELEASEINTERFACE:
+		snoop(&dev->dev, "%s: RELEASEINTERFACE\n", __func__);
+		ret = proc_releaseinterface(ps, p);
+		break;
+
+	case USBDEVFS_IOCTL:
+		snoop(&dev->dev, "%s: IOCTL\n", __func__);
+		ret = proc_ioctl_default(ps, p);
+		break;
+
+	case USBDEVFS_CLAIM_PORT:
+		snoop(&dev->dev, "%s: CLAIM_PORT\n", __func__);
+		ret = proc_claim_port(ps, p);
+		break;
+
+	case USBDEVFS_RELEASE_PORT:
+		snoop(&dev->dev, "%s: RELEASE_PORT\n", __func__);
+		ret = proc_release_port(ps, p);
+		break;
+	case USBDEVFS_GET_CAPABILITIES:
+		ret = proc_get_capabilities(ps, p);
+		break;
+	case USBDEVFS_DISCONNECT_CLAIM:
+		ret = proc_disconnect_claim(ps, p);
+		break;
+	case USBDEVFS_ALLOC_STREAMS:
+		ret = proc_alloc_streams(ps, p);
+		break;
+	case USBDEVFS_FREE_STREAMS:
+		ret = proc_free_streams(ps, p);
+		break;
+	case USBDEVFS_DROP_PRIVILEGES:
+		ret = proc_drop_privileges(ps, p);
+		break;
+	case USBDEVFS_GET_SPEED:
+		ret = ps->dev->speed;
+		break;
+	case USBDEVFS_FORBID_SUSPEND:
+		ret = proc_forbid_suspend(ps);
+		break;
+	case USBDEVFS_ALLOW_SUSPEND:
+		ret = proc_allow_suspend(ps);
+		break;
+	case USBDEVFS_WAIT_FOR_RESUME:
+		ret = proc_wait_for_resume(ps);
+		break;
+	}
+
+	/* Handle variable-length commands */
+	switch (cmd & ~IOCSIZE_MASK) {
+	case USBDEVFS_CONNINFO_EX(0):
+		ret = proc_conninfo_ex(ps, p, _IOC_SIZE(cmd));
+		break;
+	}
+
+ done:
+	usb_unlock_device(dev);
+	if (ret >= 0)
+		inode->i_atime = current_time(inode);
+	return ret;
+}
+
+static long usbdev_ioctl(struct file *file, unsigned int cmd,
+			unsigned long arg)
+{
+	int ret;
+
+	ret = usbdev_do_ioctl(file, cmd, (void __user *)arg);
+
+	return ret;
+}
+
+/* No kernel lock - fine */
+static __poll_t usbdev_poll(struct file *file,
+				struct poll_table_struct *wait)
+{
+	struct usb_dev_state *ps = file->private_data;
+	__poll_t mask = 0;
+
+	poll_wait(file, &ps->wait, wait);
+	if (file->f_mode & FMODE_WRITE && !list_empty(&ps->async_completed))
+		mask |= EPOLLOUT | EPOLLWRNORM;
+	if (!connected(ps))
+		mask |= EPOLLHUP;
+	if (list_empty(&ps->list))
+		mask |= EPOLLERR;
+	return mask;
+}
+
+const struct file_operations usbdev_file_operations = {
+	.owner =	  THIS_MODULE,
+	.llseek =	  no_seek_end_llseek,
+	.read =		  usbdev_read,
+	.poll =		  usbdev_poll,
+	.unlocked_ioctl = usbdev_ioctl,
+	.compat_ioctl =   compat_ptr_ioctl,
+	.mmap =           usbdev_mmap,
+	.open =		  usbdev_open,
+	.release =	  usbdev_release,
+};
+
+static void usbdev_remove(struct usb_device *udev)
+{
+	struct usb_dev_state *ps;
+
+	/* Protect against simultaneous resume */
+	mutex_lock(&usbfs_mutex);
+	while (!list_empty(&udev->filelist)) {
+		ps = list_entry(udev->filelist.next, struct usb_dev_state, list);
+		destroy_all_async(ps);
+		wake_up_all(&ps->wait);
+		WRITE_ONCE(ps->not_yet_resumed, 0);
+		wake_up_all(&ps->wait_for_resume);
+		list_del_init(&ps->list);
+		if (ps->discsignr)
+			kill_pid_usb_asyncio(ps->discsignr, EPIPE, ps->disccontext,
+					     ps->disc_pid, ps->cred);
+	}
+	mutex_unlock(&usbfs_mutex);
+}
+
+static int usbdev_notify(struct notifier_block *self,
+			       unsigned long action, void *dev)
+{
+	switch (action) {
+	case USB_DEVICE_ADD:
+		break;
+	case USB_DEVICE_REMOVE:
+		usbdev_remove(dev);
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block usbdev_nb = {
+	.notifier_call =	usbdev_notify,
+};
+
+static struct cdev usb_device_cdev;
+
+int __init usb_devio_init(void)
+{
+	int retval;
+
+	retval = register_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX,
+					"usb_device");
+	if (retval) {
+		printk(KERN_ERR "Unable to register minors for usb_device\n");
+		goto out;
+	}
+	cdev_init(&usb_device_cdev, &usbdev_file_operations);
+	retval = cdev_add(&usb_device_cdev, USB_DEVICE_DEV, USB_DEVICE_MAX);
+	if (retval) {
+		printk(KERN_ERR "Unable to get usb_device major %d\n",
+		       USB_DEVICE_MAJOR);
+		goto error_cdev;
+	}
+	usb_register_notify(&usbdev_nb);
+out:
+	return retval;
+
+error_cdev:
+	unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
+	goto out;
+}
+
+void usb_devio_cleanup(void)
+{
+	usb_unregister_notify(&usbdev_nb);
+	cdev_del(&usb_device_cdev);
+	unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
+}
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
new file mode 100644
index 000000000..7e7e119c2
--- /dev/null
+++ b/drivers/usb/core/driver.c
@@ -0,0 +1,2033 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * drivers/usb/core/driver.c - most of the driver model stuff for usb
+ *
+ * (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * based on drivers/usb/usb.c which had the following copyrights:
+ *	(C) Copyright Linus Torvalds 1999
+ *	(C) Copyright Johannes Erdfelt 1999-2001
+ *	(C) Copyright Andreas Gal 1999
+ *	(C) Copyright Gregory P. Smith 1999
+ *	(C) Copyright Deti Fliegl 1999 (new USB architecture)
+ *	(C) Copyright Randy Dunlap 2000
+ *	(C) Copyright David Brownell 2000-2004
+ *	(C) Copyright Yggdrasil Computing, Inc. 2000
+ *		(usb_device_id matching changes by Adam J. Richter)
+ *	(C) Copyright Greg Kroah-Hartman 2002-2003
+ *
+ * Released under the GPLv2 only.
+ *
+ * NOTE! This is not actually a driver at all, rather this is
+ * just a collection of helper routines that implement the
+ * matching, probing, releasing, suspending and resuming for
+ * real drivers.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/usb.h>
+#include <linux/usb/quirks.h>
+#include <linux/usb/hcd.h>
+
+#include "usb.h"
+
+
+/*
+ * Adds a new dynamic USBdevice ID to this driver,
+ * and cause the driver to probe for all devices again.
+ */
+ssize_t usb_store_new_id(struct usb_dynids *dynids,
+			 const struct usb_device_id *id_table,
+			 struct device_driver *driver,
+			 const char *buf, size_t count)
+{
+	struct usb_dynid *dynid;
+	u32 idVendor = 0;
+	u32 idProduct = 0;
+	unsigned int bInterfaceClass = 0;
+	u32 refVendor, refProduct;
+	int fields = 0;
+	int retval = 0;
+
+	fields = sscanf(buf, "%x %x %x %x %x", &idVendor, &idProduct,
+			&bInterfaceClass, &refVendor, &refProduct);
+	if (fields < 2)
+		return -EINVAL;
+
+	dynid = kzalloc(sizeof(*dynid), GFP_KERNEL);
+	if (!dynid)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&dynid->node);
+	dynid->id.idVendor = idVendor;
+	dynid->id.idProduct = idProduct;
+	dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+	if (fields > 2 && bInterfaceClass) {
+		if (bInterfaceClass > 255) {
+			retval = -EINVAL;
+			goto fail;
+		}
+
+		dynid->id.bInterfaceClass = (u8)bInterfaceClass;
+		dynid->id.match_flags |= USB_DEVICE_ID_MATCH_INT_CLASS;
+	}
+
+	if (fields > 4) {
+		const struct usb_device_id *id = id_table;
+
+		if (!id) {
+			retval = -ENODEV;
+			goto fail;
+		}
+
+		for (; id->match_flags; id++)
+			if (id->idVendor == refVendor && id->idProduct == refProduct)
+				break;
+
+		if (id->match_flags) {
+			dynid->id.driver_info = id->driver_info;
+		} else {
+			retval = -ENODEV;
+			goto fail;
+		}
+	}
+
+	spin_lock(&dynids->lock);
+	list_add_tail(&dynid->node, &dynids->list);
+	spin_unlock(&dynids->lock);
+
+	retval = driver_attach(driver);
+
+	if (retval)
+		return retval;
+	return count;
+
+fail:
+	kfree(dynid);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(usb_store_new_id);
+
+ssize_t usb_show_dynids(struct usb_dynids *dynids, char *buf)
+{
+	struct usb_dynid *dynid;
+	size_t count = 0;
+
+	list_for_each_entry(dynid, &dynids->list, node)
+		if (dynid->id.bInterfaceClass != 0)
+			count += scnprintf(&buf[count], PAGE_SIZE - count, "%04x %04x %02x\n",
+					   dynid->id.idVendor, dynid->id.idProduct,
+					   dynid->id.bInterfaceClass);
+		else
+			count += scnprintf(&buf[count], PAGE_SIZE - count, "%04x %04x\n",
+					   dynid->id.idVendor, dynid->id.idProduct);
+	return count;
+}
+EXPORT_SYMBOL_GPL(usb_show_dynids);
+
+static ssize_t new_id_show(struct device_driver *driver, char *buf)
+{
+	struct usb_driver *usb_drv = to_usb_driver(driver);
+
+	return usb_show_dynids(&usb_drv->dynids, buf);
+}
+
+static ssize_t new_id_store(struct device_driver *driver,
+			    const char *buf, size_t count)
+{
+	struct usb_driver *usb_drv = to_usb_driver(driver);
+
+	return usb_store_new_id(&usb_drv->dynids, usb_drv->id_table, driver, buf, count);
+}
+static DRIVER_ATTR_RW(new_id);
+
+/*
+ * Remove a USB device ID from this driver
+ */
+static ssize_t remove_id_store(struct device_driver *driver, const char *buf,
+			       size_t count)
+{
+	struct usb_dynid *dynid, *n;
+	struct usb_driver *usb_driver = to_usb_driver(driver);
+	u32 idVendor;
+	u32 idProduct;
+	int fields;
+
+	fields = sscanf(buf, "%x %x", &idVendor, &idProduct);
+	if (fields < 2)
+		return -EINVAL;
+
+	spin_lock(&usb_driver->dynids.lock);
+	list_for_each_entry_safe(dynid, n, &usb_driver->dynids.list, node) {
+		struct usb_device_id *id = &dynid->id;
+
+		if ((id->idVendor == idVendor) &&
+		    (id->idProduct == idProduct)) {
+			list_del(&dynid->node);
+			kfree(dynid);
+			break;
+		}
+	}
+	spin_unlock(&usb_driver->dynids.lock);
+	return count;
+}
+
+static ssize_t remove_id_show(struct device_driver *driver, char *buf)
+{
+	return new_id_show(driver, buf);
+}
+static DRIVER_ATTR_RW(remove_id);
+
+static int usb_create_newid_files(struct usb_driver *usb_drv)
+{
+	int error = 0;
+
+	if (usb_drv->no_dynamic_id)
+		goto exit;
+
+	if (usb_drv->probe != NULL) {
+		error = driver_create_file(&usb_drv->drvwrap.driver,
+					   &driver_attr_new_id);
+		if (error == 0) {
+			error = driver_create_file(&usb_drv->drvwrap.driver,
+					&driver_attr_remove_id);
+			if (error)
+				driver_remove_file(&usb_drv->drvwrap.driver,
+						&driver_attr_new_id);
+		}
+	}
+exit:
+	return error;
+}
+
+static void usb_remove_newid_files(struct usb_driver *usb_drv)
+{
+	if (usb_drv->no_dynamic_id)
+		return;
+
+	if (usb_drv->probe != NULL) {
+		driver_remove_file(&usb_drv->drvwrap.driver,
+				&driver_attr_remove_id);
+		driver_remove_file(&usb_drv->drvwrap.driver,
+				   &driver_attr_new_id);
+	}
+}
+
+static void usb_free_dynids(struct usb_driver *usb_drv)
+{
+	struct usb_dynid *dynid, *n;
+
+	spin_lock(&usb_drv->dynids.lock);
+	list_for_each_entry_safe(dynid, n, &usb_drv->dynids.list, node) {
+		list_del(&dynid->node);
+		kfree(dynid);
+	}
+	spin_unlock(&usb_drv->dynids.lock);
+}
+
+static const struct usb_device_id *usb_match_dynamic_id(struct usb_interface *intf,
+							struct usb_driver *drv)
+{
+	struct usb_dynid *dynid;
+
+	spin_lock(&drv->dynids.lock);
+	list_for_each_entry(dynid, &drv->dynids.list, node) {
+		if (usb_match_one_id(intf, &dynid->id)) {
+			spin_unlock(&drv->dynids.lock);
+			return &dynid->id;
+		}
+	}
+	spin_unlock(&drv->dynids.lock);
+	return NULL;
+}
+
+
+/* called from driver core with dev locked */
+static int usb_probe_device(struct device *dev)
+{
+	struct usb_device_driver *udriver = to_usb_device_driver(dev->driver);
+	struct usb_device *udev = to_usb_device(dev);
+	int error = 0;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	/* TODO: Add real matching code */
+
+	/* The device should always appear to be in use
+	 * unless the driver supports autosuspend.
+	 */
+	if (!udriver->supports_autosuspend)
+		error = usb_autoresume_device(udev);
+	if (error)
+		return error;
+
+	if (udriver->generic_subclass)
+		error = usb_generic_driver_probe(udev);
+	if (error)
+		return error;
+
+	/* Probe the USB device with the driver in hand, but only
+	 * defer to a generic driver in case the current USB
+	 * device driver has an id_table or a match function; i.e.,
+	 * when the device driver was explicitly matched against
+	 * a device.
+	 *
+	 * If the device driver does not have either of these,
+	 * then we assume that it can bind to any device and is
+	 * not truly a more specialized/non-generic driver, so a
+	 * return value of -ENODEV should not force the device
+	 * to be handled by the generic USB driver, as there
+	 * can still be another, more specialized, device driver.
+	 *
+	 * This accommodates the usbip driver.
+	 *
+	 * TODO: What if, in the future, there are multiple
+	 * specialized USB device drivers for a particular device?
+	 * In such cases, there is a need to try all matching
+	 * specialised device drivers prior to setting the
+	 * use_generic_driver bit.
+	 */
+	error = udriver->probe(udev);
+	if (error == -ENODEV && udriver != &usb_generic_driver &&
+	    (udriver->id_table || udriver->match)) {
+		udev->use_generic_driver = 1;
+		return -EPROBE_DEFER;
+	}
+	return error;
+}
+
+/* called from driver core with dev locked */
+static int usb_unbind_device(struct device *dev)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	struct usb_device_driver *udriver = to_usb_device_driver(dev->driver);
+
+	if (udriver->disconnect)
+		udriver->disconnect(udev);
+	if (udriver->generic_subclass)
+		usb_generic_driver_disconnect(udev);
+	if (!udriver->supports_autosuspend)
+		usb_autosuspend_device(udev);
+	return 0;
+}
+
+/* called from driver core with dev locked */
+static int usb_probe_interface(struct device *dev)
+{
+	struct usb_driver *driver = to_usb_driver(dev->driver);
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *udev = interface_to_usbdev(intf);
+	const struct usb_device_id *id;
+	int error = -ENODEV;
+	int lpm_disable_error = -ENODEV;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	intf->needs_binding = 0;
+
+	if (usb_device_is_owned(udev))
+		return error;
+
+	if (udev->authorized == 0) {
+		dev_err(&intf->dev, "Device is not authorized for usage\n");
+		return error;
+	} else if (intf->authorized == 0) {
+		dev_err(&intf->dev, "Interface %d is not authorized for usage\n",
+				intf->altsetting->desc.bInterfaceNumber);
+		return error;
+	}
+
+	id = usb_match_dynamic_id(intf, driver);
+	if (!id)
+		id = usb_match_id(intf, driver->id_table);
+	if (!id)
+		return error;
+
+	dev_dbg(dev, "%s - got id\n", __func__);
+
+	error = usb_autoresume_device(udev);
+	if (error)
+		return error;
+
+	intf->condition = USB_INTERFACE_BINDING;
+
+	/* Probed interfaces are initially active.  They are
+	 * runtime-PM-enabled only if the driver has autosuspend support.
+	 * They are sensitive to their children's power states.
+	 */
+	pm_runtime_set_active(dev);
+	pm_suspend_ignore_children(dev, false);
+	if (driver->supports_autosuspend)
+		pm_runtime_enable(dev);
+
+	/* If the new driver doesn't allow hub-initiated LPM, and we can't
+	 * disable hub-initiated LPM, then fail the probe.
+	 *
+	 * Otherwise, leaving LPM enabled should be harmless, because the
+	 * endpoint intervals should remain the same, and the U1/U2 timeouts
+	 * should remain the same.
+	 *
+	 * If we need to install alt setting 0 before probe, or another alt
+	 * setting during probe, that should also be fine.  usb_set_interface()
+	 * will attempt to disable LPM, and fail if it can't disable it.
+	 */
+	if (driver->disable_hub_initiated_lpm) {
+		lpm_disable_error = usb_unlocked_disable_lpm(udev);
+		if (lpm_disable_error) {
+			dev_err(&intf->dev, "%s Failed to disable LPM for driver %s\n",
+				__func__, driver->name);
+			error = lpm_disable_error;
+			goto err;
+		}
+	}
+
+	/* Carry out a deferred switch to altsetting 0 */
+	if (intf->needs_altsetting0) {
+		error = usb_set_interface(udev, intf->altsetting[0].
+				desc.bInterfaceNumber, 0);
+		if (error < 0)
+			goto err;
+		intf->needs_altsetting0 = 0;
+	}
+
+	error = driver->probe(intf, id);
+	if (error)
+		goto err;
+
+	intf->condition = USB_INTERFACE_BOUND;
+
+	/* If the LPM disable succeeded, balance the ref counts. */
+	if (!lpm_disable_error)
+		usb_unlocked_enable_lpm(udev);
+
+	usb_autosuspend_device(udev);
+	return error;
+
+ err:
+	usb_set_intfdata(intf, NULL);
+	intf->needs_remote_wakeup = 0;
+	intf->condition = USB_INTERFACE_UNBOUND;
+
+	/* If the LPM disable succeeded, balance the ref counts. */
+	if (!lpm_disable_error)
+		usb_unlocked_enable_lpm(udev);
+
+	/* Unbound interfaces are always runtime-PM-disabled and -suspended */
+	if (driver->supports_autosuspend)
+		pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+
+	usb_autosuspend_device(udev);
+	return error;
+}
+
+/* called from driver core with dev locked */
+static int usb_unbind_interface(struct device *dev)
+{
+	struct usb_driver *driver = to_usb_driver(dev->driver);
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_host_endpoint *ep, **eps = NULL;
+	struct usb_device *udev;
+	int i, j, error, r;
+	int lpm_disable_error = -ENODEV;
+
+	intf->condition = USB_INTERFACE_UNBINDING;
+
+	/* Autoresume for set_interface call below */
+	udev = interface_to_usbdev(intf);
+	error = usb_autoresume_device(udev);
+
+	/* If hub-initiated LPM policy may change, attempt to disable LPM until
+	 * the driver is unbound.  If LPM isn't disabled, that's fine because it
+	 * wouldn't be enabled unless all the bound interfaces supported
+	 * hub-initiated LPM.
+	 */
+	if (driver->disable_hub_initiated_lpm)
+		lpm_disable_error = usb_unlocked_disable_lpm(udev);
+
+	/*
+	 * Terminate all URBs for this interface unless the driver
+	 * supports "soft" unbinding and the device is still present.
+	 */
+	if (!driver->soft_unbind || udev->state == USB_STATE_NOTATTACHED)
+		usb_disable_interface(udev, intf, false);
+
+	driver->disconnect(intf);
+
+	/* Free streams */
+	for (i = 0, j = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
+		ep = &intf->cur_altsetting->endpoint[i];
+		if (ep->streams == 0)
+			continue;
+		if (j == 0) {
+			eps = kmalloc_array(USB_MAXENDPOINTS, sizeof(void *),
+				      GFP_KERNEL);
+			if (!eps)
+				break;
+		}
+		eps[j++] = ep;
+	}
+	if (j) {
+		usb_free_streams(intf, eps, j, GFP_KERNEL);
+		kfree(eps);
+	}
+
+	/* Reset other interface state.
+	 * We cannot do a Set-Interface if the device is suspended or
+	 * if it is prepared for a system sleep (since installing a new
+	 * altsetting means creating new endpoint device entries).
+	 * When either of these happens, defer the Set-Interface.
+	 */
+	if (intf->cur_altsetting->desc.bAlternateSetting == 0) {
+		/* Already in altsetting 0 so skip Set-Interface.
+		 * Just re-enable it without affecting the endpoint toggles.
+		 */
+		usb_enable_interface(udev, intf, false);
+	} else if (!error && !intf->dev.power.is_prepared) {
+		r = usb_set_interface(udev, intf->altsetting[0].
+				desc.bInterfaceNumber, 0);
+		if (r < 0)
+			intf->needs_altsetting0 = 1;
+	} else {
+		intf->needs_altsetting0 = 1;
+	}
+	usb_set_intfdata(intf, NULL);
+
+	intf->condition = USB_INTERFACE_UNBOUND;
+	intf->needs_remote_wakeup = 0;
+
+	/* Attempt to re-enable USB3 LPM, if the disable succeeded. */
+	if (!lpm_disable_error)
+		usb_unlocked_enable_lpm(udev);
+
+	/* Unbound interfaces are always runtime-PM-disabled and -suspended */
+	if (driver->supports_autosuspend)
+		pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+
+	if (!error)
+		usb_autosuspend_device(udev);
+
+	return 0;
+}
+
+/**
+ * usb_driver_claim_interface - bind a driver to an interface
+ * @driver: the driver to be bound
+ * @iface: the interface to which it will be bound; must be in the
+ *	usb device's active configuration
+ * @data: driver data associated with that interface
+ *
+ * This is used by usb device drivers that need to claim more than one
+ * interface on a device when probing (audio and acm are current examples).
+ * No device driver should directly modify internal usb_interface or
+ * usb_device structure members.
+ *
+ * Callers must own the device lock, so driver probe() entries don't need
+ * extra locking, but other call contexts may need to explicitly claim that
+ * lock.
+ *
+ * Return: 0 on success.
+ */
+int usb_driver_claim_interface(struct usb_driver *driver,
+				struct usb_interface *iface, void *data)
+{
+	struct device *dev;
+	int retval = 0;
+
+	if (!iface)
+		return -ENODEV;
+
+	dev = &iface->dev;
+	if (dev->driver)
+		return -EBUSY;
+
+	/* reject claim if interface is not authorized */
+	if (!iface->authorized)
+		return -ENODEV;
+
+	dev->driver = &driver->drvwrap.driver;
+	usb_set_intfdata(iface, data);
+	iface->needs_binding = 0;
+
+	iface->condition = USB_INTERFACE_BOUND;
+
+	/* Claimed interfaces are initially inactive (suspended) and
+	 * runtime-PM-enabled, but only if the driver has autosuspend
+	 * support.  Otherwise they are marked active, to prevent the
+	 * device from being autosuspended, but left disabled.  In either
+	 * case they are sensitive to their children's power states.
+	 */
+	pm_suspend_ignore_children(dev, false);
+	if (driver->supports_autosuspend)
+		pm_runtime_enable(dev);
+	else
+		pm_runtime_set_active(dev);
+
+	/* if interface was already added, bind now; else let
+	 * the future device_add() bind it, bypassing probe()
+	 */
+	if (device_is_registered(dev))
+		retval = device_bind_driver(dev);
+
+	if (retval) {
+		dev->driver = NULL;
+		usb_set_intfdata(iface, NULL);
+		iface->needs_remote_wakeup = 0;
+		iface->condition = USB_INTERFACE_UNBOUND;
+
+		/*
+		 * Unbound interfaces are always runtime-PM-disabled
+		 * and runtime-PM-suspended
+		 */
+		if (driver->supports_autosuspend)
+			pm_runtime_disable(dev);
+		pm_runtime_set_suspended(dev);
+	}
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(usb_driver_claim_interface);
+
+/**
+ * usb_driver_release_interface - unbind a driver from an interface
+ * @driver: the driver to be unbound
+ * @iface: the interface from which it will be unbound
+ *
+ * This can be used by drivers to release an interface without waiting
+ * for their disconnect() methods to be called.  In typical cases this
+ * also causes the driver disconnect() method to be called.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ * Callers must own the device lock, so driver disconnect() entries don't
+ * need extra locking, but other call contexts may need to explicitly claim
+ * that lock.
+ */
+void usb_driver_release_interface(struct usb_driver *driver,
+					struct usb_interface *iface)
+{
+	struct device *dev = &iface->dev;
+
+	/* this should never happen, don't release something that's not ours */
+	if (!dev->driver || dev->driver != &driver->drvwrap.driver)
+		return;
+
+	/* don't release from within disconnect() */
+	if (iface->condition != USB_INTERFACE_BOUND)
+		return;
+	iface->condition = USB_INTERFACE_UNBINDING;
+
+	/* Release via the driver core only if the interface
+	 * has already been registered
+	 */
+	if (device_is_registered(dev)) {
+		device_release_driver(dev);
+	} else {
+		device_lock(dev);
+		usb_unbind_interface(dev);
+		dev->driver = NULL;
+		device_unlock(dev);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_driver_release_interface);
+
+/* returns 0 if no match, 1 if match */
+int usb_match_device(struct usb_device *dev, const struct usb_device_id *id)
+{
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
+	    id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
+	    id->idProduct != le16_to_cpu(dev->descriptor.idProduct))
+		return 0;
+
+	/* No need to test id->bcdDevice_lo != 0, since 0 is never
+	   greater than any unsigned number. */
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
+	    (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice)))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
+	    (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice)))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
+	    (id->bDeviceClass != dev->descriptor.bDeviceClass))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
+	    (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
+	    (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
+		return 0;
+
+	return 1;
+}
+
+/* returns 0 if no match, 1 if match */
+int usb_match_one_id_intf(struct usb_device *dev,
+			  struct usb_host_interface *intf,
+			  const struct usb_device_id *id)
+{
+	/* The interface class, subclass, protocol and number should never be
+	 * checked for a match if the device class is Vendor Specific,
+	 * unless the match record specifies the Vendor ID. */
+	if (dev->descriptor.bDeviceClass == USB_CLASS_VENDOR_SPEC &&
+			!(id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
+			(id->match_flags & (USB_DEVICE_ID_MATCH_INT_CLASS |
+				USB_DEVICE_ID_MATCH_INT_SUBCLASS |
+				USB_DEVICE_ID_MATCH_INT_PROTOCOL |
+				USB_DEVICE_ID_MATCH_INT_NUMBER)))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) &&
+	    (id->bInterfaceClass != intf->desc.bInterfaceClass))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) &&
+	    (id->bInterfaceSubClass != intf->desc.bInterfaceSubClass))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) &&
+	    (id->bInterfaceProtocol != intf->desc.bInterfaceProtocol))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_NUMBER) &&
+	    (id->bInterfaceNumber != intf->desc.bInterfaceNumber))
+		return 0;
+
+	return 1;
+}
+
+/* returns 0 if no match, 1 if match */
+int usb_match_one_id(struct usb_interface *interface,
+		     const struct usb_device_id *id)
+{
+	struct usb_host_interface *intf;
+	struct usb_device *dev;
+
+	/* proc_connectinfo in devio.c may call us with id == NULL. */
+	if (id == NULL)
+		return 0;
+
+	intf = interface->cur_altsetting;
+	dev = interface_to_usbdev(interface);
+
+	if (!usb_match_device(dev, id))
+		return 0;
+
+	return usb_match_one_id_intf(dev, intf, id);
+}
+EXPORT_SYMBOL_GPL(usb_match_one_id);
+
+/**
+ * usb_match_id - find first usb_device_id matching device or interface
+ * @interface: the interface of interest
+ * @id: array of usb_device_id structures, terminated by zero entry
+ *
+ * usb_match_id searches an array of usb_device_id's and returns
+ * the first one matching the device or interface, or null.
+ * This is used when binding (or rebinding) a driver to an interface.
+ * Most USB device drivers will use this indirectly, through the usb core,
+ * but some layered driver frameworks use it directly.
+ * These device tables are exported with MODULE_DEVICE_TABLE, through
+ * modutils, to support the driver loading functionality of USB hotplugging.
+ *
+ * Return: The first matching usb_device_id, or %NULL.
+ *
+ * What Matches:
+ *
+ * The "match_flags" element in a usb_device_id controls which
+ * members are used.  If the corresponding bit is set, the
+ * value in the device_id must match its corresponding member
+ * in the device or interface descriptor, or else the device_id
+ * does not match.
+ *
+ * "driver_info" is normally used only by device drivers,
+ * but you can create a wildcard "matches anything" usb_device_id
+ * as a driver's "modules.usbmap" entry if you provide an id with
+ * only a nonzero "driver_info" field.  If you do this, the USB device
+ * driver's probe() routine should use additional intelligence to
+ * decide whether to bind to the specified interface.
+ *
+ * What Makes Good usb_device_id Tables:
+ *
+ * The match algorithm is very simple, so that intelligence in
+ * driver selection must come from smart driver id records.
+ * Unless you have good reasons to use another selection policy,
+ * provide match elements only in related groups, and order match
+ * specifiers from specific to general.  Use the macros provided
+ * for that purpose if you can.
+ *
+ * The most specific match specifiers use device descriptor
+ * data.  These are commonly used with product-specific matches;
+ * the USB_DEVICE macro lets you provide vendor and product IDs,
+ * and you can also match against ranges of product revisions.
+ * These are widely used for devices with application or vendor
+ * specific bDeviceClass values.
+ *
+ * Matches based on device class/subclass/protocol specifications
+ * are slightly more general; use the USB_DEVICE_INFO macro, or
+ * its siblings.  These are used with single-function devices
+ * where bDeviceClass doesn't specify that each interface has
+ * its own class.
+ *
+ * Matches based on interface class/subclass/protocol are the
+ * most general; they let drivers bind to any interface on a
+ * multiple-function device.  Use the USB_INTERFACE_INFO
+ * macro, or its siblings, to match class-per-interface style
+ * devices (as recorded in bInterfaceClass).
+ *
+ * Note that an entry created by USB_INTERFACE_INFO won't match
+ * any interface if the device class is set to Vendor-Specific.
+ * This is deliberate; according to the USB spec the meanings of
+ * the interface class/subclass/protocol for these devices are also
+ * vendor-specific, and hence matching against a standard product
+ * class wouldn't work anyway.  If you really want to use an
+ * interface-based match for such a device, create a match record
+ * that also specifies the vendor ID.  (Unforunately there isn't a
+ * standard macro for creating records like this.)
+ *
+ * Within those groups, remember that not all combinations are
+ * meaningful.  For example, don't give a product version range
+ * without vendor and product IDs; or specify a protocol without
+ * its associated class and subclass.
+ */
+const struct usb_device_id *usb_match_id(struct usb_interface *interface,
+					 const struct usb_device_id *id)
+{
+	/* proc_connectinfo in devio.c may call us with id == NULL. */
+	if (id == NULL)
+		return NULL;
+
+	/* It is important to check that id->driver_info is nonzero,
+	   since an entry that is all zeroes except for a nonzero
+	   id->driver_info is the way to create an entry that
+	   indicates that the driver want to examine every
+	   device and interface. */
+	for (; id->idVendor || id->idProduct || id->bDeviceClass ||
+	       id->bInterfaceClass || id->driver_info; id++) {
+		if (usb_match_one_id(interface, id))
+			return id;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(usb_match_id);
+
+const struct usb_device_id *usb_device_match_id(struct usb_device *udev,
+				const struct usb_device_id *id)
+{
+	if (!id)
+		return NULL;
+
+	for (; id->idVendor || id->idProduct ; id++) {
+		if (usb_match_device(udev, id))
+			return id;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(usb_device_match_id);
+
+bool usb_driver_applicable(struct usb_device *udev,
+			   struct usb_device_driver *udrv)
+{
+	if (udrv->id_table && udrv->match)
+		return usb_device_match_id(udev, udrv->id_table) != NULL &&
+		       udrv->match(udev);
+
+	if (udrv->id_table)
+		return usb_device_match_id(udev, udrv->id_table) != NULL;
+
+	if (udrv->match)
+		return udrv->match(udev);
+
+	return false;
+}
+
+static int usb_device_match(struct device *dev, struct device_driver *drv)
+{
+	/* devices and interfaces are handled separately */
+	if (is_usb_device(dev)) {
+		struct usb_device *udev;
+		struct usb_device_driver *udrv;
+
+		/* interface drivers never match devices */
+		if (!is_usb_device_driver(drv))
+			return 0;
+
+		udev = to_usb_device(dev);
+		udrv = to_usb_device_driver(drv);
+
+		/* If the device driver under consideration does not have a
+		 * id_table or a match function, then let the driver's probe
+		 * function decide.
+		 */
+		if (!udrv->id_table && !udrv->match)
+			return 1;
+
+		return usb_driver_applicable(udev, udrv);
+
+	} else if (is_usb_interface(dev)) {
+		struct usb_interface *intf;
+		struct usb_driver *usb_drv;
+		const struct usb_device_id *id;
+
+		/* device drivers never match interfaces */
+		if (is_usb_device_driver(drv))
+			return 0;
+
+		intf = to_usb_interface(dev);
+		usb_drv = to_usb_driver(drv);
+
+		id = usb_match_id(intf, usb_drv->id_table);
+		if (id)
+			return 1;
+
+		id = usb_match_dynamic_id(intf, usb_drv);
+		if (id)
+			return 1;
+	}
+
+	return 0;
+}
+
+static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct usb_device *usb_dev;
+
+	if (is_usb_device(dev)) {
+		usb_dev = to_usb_device(dev);
+	} else if (is_usb_interface(dev)) {
+		struct usb_interface *intf = to_usb_interface(dev);
+
+		usb_dev = interface_to_usbdev(intf);
+	} else {
+		return 0;
+	}
+
+	if (usb_dev->devnum < 0) {
+		/* driver is often null here; dev_dbg() would oops */
+		pr_debug("usb %s: already deleted?\n", dev_name(dev));
+		return -ENODEV;
+	}
+	if (!usb_dev->bus) {
+		pr_debug("usb %s: bus removed?\n", dev_name(dev));
+		return -ENODEV;
+	}
+
+	/* per-device configurations are common */
+	if (add_uevent_var(env, "PRODUCT=%x/%x/%x",
+			   le16_to_cpu(usb_dev->descriptor.idVendor),
+			   le16_to_cpu(usb_dev->descriptor.idProduct),
+			   le16_to_cpu(usb_dev->descriptor.bcdDevice)))
+		return -ENOMEM;
+
+	/* class-based driver binding models */
+	if (add_uevent_var(env, "TYPE=%d/%d/%d",
+			   usb_dev->descriptor.bDeviceClass,
+			   usb_dev->descriptor.bDeviceSubClass,
+			   usb_dev->descriptor.bDeviceProtocol))
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int __usb_bus_reprobe_drivers(struct device *dev, void *data)
+{
+	struct usb_device_driver *new_udriver = data;
+	struct usb_device *udev;
+	int ret;
+
+	/* Don't reprobe if current driver isn't usb_generic_driver */
+	if (dev->driver != &usb_generic_driver.drvwrap.driver)
+		return 0;
+
+	udev = to_usb_device(dev);
+	if (!usb_driver_applicable(udev, new_udriver))
+		return 0;
+
+	ret = device_reprobe(dev);
+	if (ret && ret != -EPROBE_DEFER)
+		dev_err(dev, "Failed to reprobe device (error %d)\n", ret);
+
+	return 0;
+}
+
+/**
+ * usb_register_device_driver - register a USB device (not interface) driver
+ * @new_udriver: USB operations for the device driver
+ * @owner: module owner of this driver.
+ *
+ * Registers a USB device driver with the USB core.  The list of
+ * unattached devices will be rescanned whenever a new driver is
+ * added, allowing the new driver to attach to any recognized devices.
+ *
+ * Return: A negative error code on failure and 0 on success.
+ */
+int usb_register_device_driver(struct usb_device_driver *new_udriver,
+		struct module *owner)
+{
+	int retval = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	new_udriver->drvwrap.for_devices = 1;
+	new_udriver->drvwrap.driver.name = new_udriver->name;
+	new_udriver->drvwrap.driver.bus = &usb_bus_type;
+	new_udriver->drvwrap.driver.probe = usb_probe_device;
+	new_udriver->drvwrap.driver.remove = usb_unbind_device;
+	new_udriver->drvwrap.driver.owner = owner;
+	new_udriver->drvwrap.driver.dev_groups = new_udriver->dev_groups;
+
+	retval = driver_register(&new_udriver->drvwrap.driver);
+
+	if (!retval) {
+		pr_info("%s: registered new device driver %s\n",
+			usbcore_name, new_udriver->name);
+		/*
+		 * Check whether any device could be better served with
+		 * this new driver
+		 */
+		bus_for_each_dev(&usb_bus_type, NULL, new_udriver,
+				 __usb_bus_reprobe_drivers);
+	} else {
+		pr_err("%s: error %d registering device driver %s\n",
+			usbcore_name, retval, new_udriver->name);
+	}
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(usb_register_device_driver);
+
+/**
+ * usb_deregister_device_driver - unregister a USB device (not interface) driver
+ * @udriver: USB operations of the device driver to unregister
+ * Context: must be able to sleep
+ *
+ * Unlinks the specified driver from the internal USB driver list.
+ */
+void usb_deregister_device_driver(struct usb_device_driver *udriver)
+{
+	pr_info("%s: deregistering device driver %s\n",
+			usbcore_name, udriver->name);
+
+	driver_unregister(&udriver->drvwrap.driver);
+}
+EXPORT_SYMBOL_GPL(usb_deregister_device_driver);
+
+/**
+ * usb_register_driver - register a USB interface driver
+ * @new_driver: USB operations for the interface driver
+ * @owner: module owner of this driver.
+ * @mod_name: module name string
+ *
+ * Registers a USB interface driver with the USB core.  The list of
+ * unattached interfaces will be rescanned whenever a new driver is
+ * added, allowing the new driver to attach to any recognized interfaces.
+ *
+ * Return: A negative error code on failure and 0 on success.
+ *
+ * NOTE: if you want your driver to use the USB major number, you must call
+ * usb_register_dev() to enable that functionality.  This function no longer
+ * takes care of that.
+ */
+int usb_register_driver(struct usb_driver *new_driver, struct module *owner,
+			const char *mod_name)
+{
+	int retval = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	new_driver->drvwrap.for_devices = 0;
+	new_driver->drvwrap.driver.name = new_driver->name;
+	new_driver->drvwrap.driver.bus = &usb_bus_type;
+	new_driver->drvwrap.driver.probe = usb_probe_interface;
+	new_driver->drvwrap.driver.remove = usb_unbind_interface;
+	new_driver->drvwrap.driver.owner = owner;
+	new_driver->drvwrap.driver.mod_name = mod_name;
+	new_driver->drvwrap.driver.dev_groups = new_driver->dev_groups;
+	spin_lock_init(&new_driver->dynids.lock);
+	INIT_LIST_HEAD(&new_driver->dynids.list);
+
+	retval = driver_register(&new_driver->drvwrap.driver);
+	if (retval)
+		goto out;
+
+	retval = usb_create_newid_files(new_driver);
+	if (retval)
+		goto out_newid;
+
+	pr_info("%s: registered new interface driver %s\n",
+			usbcore_name, new_driver->name);
+
+out:
+	return retval;
+
+out_newid:
+	driver_unregister(&new_driver->drvwrap.driver);
+
+	pr_err("%s: error %d registering interface driver %s\n",
+		usbcore_name, retval, new_driver->name);
+	goto out;
+}
+EXPORT_SYMBOL_GPL(usb_register_driver);
+
+/**
+ * usb_deregister - unregister a USB interface driver
+ * @driver: USB operations of the interface driver to unregister
+ * Context: must be able to sleep
+ *
+ * Unlinks the specified driver from the internal USB driver list.
+ *
+ * NOTE: If you called usb_register_dev(), you still need to call
+ * usb_deregister_dev() to clean up your driver's allocated minor numbers,
+ * this * call will no longer do it for you.
+ */
+void usb_deregister(struct usb_driver *driver)
+{
+	pr_info("%s: deregistering interface driver %s\n",
+			usbcore_name, driver->name);
+
+	usb_remove_newid_files(driver);
+	driver_unregister(&driver->drvwrap.driver);
+	usb_free_dynids(driver);
+}
+EXPORT_SYMBOL_GPL(usb_deregister);
+
+/* Forced unbinding of a USB interface driver, either because
+ * it doesn't support pre_reset/post_reset/reset_resume or
+ * because it doesn't support suspend/resume.
+ *
+ * The caller must hold @intf's device's lock, but not @intf's lock.
+ */
+void usb_forced_unbind_intf(struct usb_interface *intf)
+{
+	struct usb_driver *driver = to_usb_driver(intf->dev.driver);
+
+	dev_dbg(&intf->dev, "forced unbind\n");
+	usb_driver_release_interface(driver, intf);
+
+	/* Mark the interface for later rebinding */
+	intf->needs_binding = 1;
+}
+
+/*
+ * Unbind drivers for @udev's marked interfaces.  These interfaces have
+ * the needs_binding flag set, for example by usb_resume_interface().
+ *
+ * The caller must hold @udev's device lock.
+ */
+static void unbind_marked_interfaces(struct usb_device *udev)
+{
+	struct usb_host_config	*config;
+	int			i;
+	struct usb_interface	*intf;
+
+	config = udev->actconfig;
+	if (config) {
+		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+			intf = config->interface[i];
+			if (intf->dev.driver && intf->needs_binding)
+				usb_forced_unbind_intf(intf);
+		}
+	}
+}
+
+/* Delayed forced unbinding of a USB interface driver and scan
+ * for rebinding.
+ *
+ * The caller must hold @intf's device's lock, but not @intf's lock.
+ *
+ * Note: Rebinds will be skipped if a system sleep transition is in
+ * progress and the PM "complete" callback hasn't occurred yet.
+ */
+static void usb_rebind_intf(struct usb_interface *intf)
+{
+	int rc;
+
+	/* Delayed unbind of an existing driver */
+	if (intf->dev.driver)
+		usb_forced_unbind_intf(intf);
+
+	/* Try to rebind the interface */
+	if (!intf->dev.power.is_prepared) {
+		intf->needs_binding = 0;
+		rc = device_attach(&intf->dev);
+		if (rc < 0 && rc != -EPROBE_DEFER)
+			dev_warn(&intf->dev, "rebind failed: %d\n", rc);
+	}
+}
+
+/*
+ * Rebind drivers to @udev's marked interfaces.  These interfaces have
+ * the needs_binding flag set.
+ *
+ * The caller must hold @udev's device lock.
+ */
+static void rebind_marked_interfaces(struct usb_device *udev)
+{
+	struct usb_host_config	*config;
+	int			i;
+	struct usb_interface	*intf;
+
+	config = udev->actconfig;
+	if (config) {
+		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+			intf = config->interface[i];
+			if (intf->needs_binding)
+				usb_rebind_intf(intf);
+		}
+	}
+}
+
+/*
+ * Unbind all of @udev's marked interfaces and then rebind all of them.
+ * This ordering is necessary because some drivers claim several interfaces
+ * when they are first probed.
+ *
+ * The caller must hold @udev's device lock.
+ */
+void usb_unbind_and_rebind_marked_interfaces(struct usb_device *udev)
+{
+	unbind_marked_interfaces(udev);
+	rebind_marked_interfaces(udev);
+}
+
+#ifdef CONFIG_PM
+
+/* Unbind drivers for @udev's interfaces that don't support suspend/resume
+ * There is no check for reset_resume here because it can be determined
+ * only during resume whether reset_resume is needed.
+ *
+ * The caller must hold @udev's device lock.
+ */
+static void unbind_no_pm_drivers_interfaces(struct usb_device *udev)
+{
+	struct usb_host_config	*config;
+	int			i;
+	struct usb_interface	*intf;
+	struct usb_driver	*drv;
+
+	config = udev->actconfig;
+	if (config) {
+		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+			intf = config->interface[i];
+
+			if (intf->dev.driver) {
+				drv = to_usb_driver(intf->dev.driver);
+				if (!drv->suspend || !drv->resume)
+					usb_forced_unbind_intf(intf);
+			}
+		}
+	}
+}
+
+static int usb_suspend_device(struct usb_device *udev, pm_message_t msg)
+{
+	struct usb_device_driver	*udriver;
+	int				status = 0;
+
+	if (udev->state == USB_STATE_NOTATTACHED ||
+			udev->state == USB_STATE_SUSPENDED)
+		goto done;
+
+	/* For devices that don't have a driver, we do a generic suspend. */
+	if (udev->dev.driver)
+		udriver = to_usb_device_driver(udev->dev.driver);
+	else {
+		udev->do_remote_wakeup = 0;
+		udriver = &usb_generic_driver;
+	}
+	if (udriver->suspend)
+		status = udriver->suspend(udev, msg);
+	if (status == 0 && udriver->generic_subclass)
+		status = usb_generic_driver_suspend(udev, msg);
+
+ done:
+	dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status);
+	return status;
+}
+
+static int usb_resume_device(struct usb_device *udev, pm_message_t msg)
+{
+	struct usb_device_driver	*udriver;
+	int				status = 0;
+
+	if (udev->state == USB_STATE_NOTATTACHED)
+		goto done;
+
+	/* Can't resume it if it doesn't have a driver. */
+	if (udev->dev.driver == NULL) {
+		status = -ENOTCONN;
+		goto done;
+	}
+
+	/* Non-root devices on a full/low-speed bus must wait for their
+	 * companion high-speed root hub, in case a handoff is needed.
+	 */
+	if (!PMSG_IS_AUTO(msg) && udev->parent && udev->bus->hs_companion)
+		device_pm_wait_for_dev(&udev->dev,
+				&udev->bus->hs_companion->root_hub->dev);
+
+	if (udev->quirks & USB_QUIRK_RESET_RESUME)
+		udev->reset_resume = 1;
+
+	udriver = to_usb_device_driver(udev->dev.driver);
+	if (udriver->generic_subclass)
+		status = usb_generic_driver_resume(udev, msg);
+	if (status == 0 && udriver->resume)
+		status = udriver->resume(udev, msg);
+
+ done:
+	dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status);
+	return status;
+}
+
+static int usb_suspend_interface(struct usb_device *udev,
+		struct usb_interface *intf, pm_message_t msg)
+{
+	struct usb_driver	*driver;
+	int			status = 0;
+
+	if (udev->state == USB_STATE_NOTATTACHED ||
+			intf->condition == USB_INTERFACE_UNBOUND)
+		goto done;
+	driver = to_usb_driver(intf->dev.driver);
+
+	/* at this time we know the driver supports suspend */
+	status = driver->suspend(intf, msg);
+	if (status && !PMSG_IS_AUTO(msg))
+		dev_err(&intf->dev, "suspend error %d\n", status);
+
+ done:
+	dev_vdbg(&intf->dev, "%s: status %d\n", __func__, status);
+	return status;
+}
+
+static int usb_resume_interface(struct usb_device *udev,
+		struct usb_interface *intf, pm_message_t msg, int reset_resume)
+{
+	struct usb_driver	*driver;
+	int			status = 0;
+
+	if (udev->state == USB_STATE_NOTATTACHED)
+		goto done;
+
+	/* Don't let autoresume interfere with unbinding */
+	if (intf->condition == USB_INTERFACE_UNBINDING)
+		goto done;
+
+	/* Can't resume it if it doesn't have a driver. */
+	if (intf->condition == USB_INTERFACE_UNBOUND) {
+
+		/* Carry out a deferred switch to altsetting 0 */
+		if (intf->needs_altsetting0 && !intf->dev.power.is_prepared) {
+			usb_set_interface(udev, intf->altsetting[0].
+					desc.bInterfaceNumber, 0);
+			intf->needs_altsetting0 = 0;
+		}
+		goto done;
+	}
+
+	/* Don't resume if the interface is marked for rebinding */
+	if (intf->needs_binding)
+		goto done;
+	driver = to_usb_driver(intf->dev.driver);
+
+	if (reset_resume) {
+		if (driver->reset_resume) {
+			status = driver->reset_resume(intf);
+			if (status)
+				dev_err(&intf->dev, "%s error %d\n",
+						"reset_resume", status);
+		} else {
+			intf->needs_binding = 1;
+			dev_dbg(&intf->dev, "no reset_resume for driver %s?\n",
+					driver->name);
+		}
+	} else {
+		status = driver->resume(intf);
+		if (status)
+			dev_err(&intf->dev, "resume error %d\n", status);
+	}
+
+done:
+	dev_vdbg(&intf->dev, "%s: status %d\n", __func__, status);
+
+	/* Later we will unbind the driver and/or reprobe, if necessary */
+	return status;
+}
+
+/**
+ * usb_suspend_both - suspend a USB device and its interfaces
+ * @udev: the usb_device to suspend
+ * @msg: Power Management message describing this state transition
+ *
+ * This is the central routine for suspending USB devices.  It calls the
+ * suspend methods for all the interface drivers in @udev and then calls
+ * the suspend method for @udev itself.  When the routine is called in
+ * autosuspend, if an error occurs at any stage, all the interfaces
+ * which were suspended are resumed so that they remain in the same
+ * state as the device, but when called from system sleep, all error
+ * from suspend methods of interfaces and the non-root-hub device itself
+ * are simply ignored, so all suspended interfaces are only resumed
+ * to the device's state when @udev is root-hub and its suspend method
+ * returns failure.
+ *
+ * Autosuspend requests originating from a child device or an interface
+ * driver may be made without the protection of @udev's device lock, but
+ * all other suspend calls will hold the lock.  Usbcore will insure that
+ * method calls do not arrive during bind, unbind, or reset operations.
+ * However drivers must be prepared to handle suspend calls arriving at
+ * unpredictable times.
+ *
+ * This routine can run only in process context.
+ *
+ * Return: 0 if the suspend succeeded.
+ */
+static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
+{
+	int			status = 0;
+	int			i = 0, n = 0;
+	struct usb_interface	*intf;
+
+	if (udev->state == USB_STATE_NOTATTACHED ||
+			udev->state == USB_STATE_SUSPENDED)
+		goto done;
+
+	/* Suspend all the interfaces and then udev itself */
+	if (udev->actconfig) {
+		n = udev->actconfig->desc.bNumInterfaces;
+		for (i = n - 1; i >= 0; --i) {
+			intf = udev->actconfig->interface[i];
+			status = usb_suspend_interface(udev, intf, msg);
+
+			/* Ignore errors during system sleep transitions */
+			if (!PMSG_IS_AUTO(msg))
+				status = 0;
+			if (status != 0)
+				break;
+		}
+	}
+	if (status == 0) {
+		status = usb_suspend_device(udev, msg);
+
+		/*
+		 * Ignore errors from non-root-hub devices during
+		 * system sleep transitions.  For the most part,
+		 * these devices should go to low power anyway when
+		 * the entire bus is suspended.
+		 */
+		if (udev->parent && !PMSG_IS_AUTO(msg))
+			status = 0;
+
+		/*
+		 * If the device is inaccessible, don't try to resume
+		 * suspended interfaces and just return the error.
+		 */
+		if (status && status != -EBUSY) {
+			int err;
+			u16 devstat;
+
+			err = usb_get_std_status(udev, USB_RECIP_DEVICE, 0,
+						 &devstat);
+			if (err) {
+				dev_err(&udev->dev,
+					"Failed to suspend device, error %d\n",
+					status);
+				goto done;
+			}
+		}
+	}
+
+	/* If the suspend failed, resume interfaces that did get suspended */
+	if (status != 0) {
+		if (udev->actconfig) {
+			msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME);
+			while (++i < n) {
+				intf = udev->actconfig->interface[i];
+				usb_resume_interface(udev, intf, msg, 0);
+			}
+		}
+
+	/* If the suspend succeeded then prevent any more URB submissions
+	 * and flush any outstanding URBs.
+	 */
+	} else {
+		udev->can_submit = 0;
+		for (i = 0; i < 16; ++i) {
+			usb_hcd_flush_endpoint(udev, udev->ep_out[i]);
+			usb_hcd_flush_endpoint(udev, udev->ep_in[i]);
+		}
+	}
+
+ done:
+	dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status);
+	return status;
+}
+
+/**
+ * usb_resume_both - resume a USB device and its interfaces
+ * @udev: the usb_device to resume
+ * @msg: Power Management message describing this state transition
+ *
+ * This is the central routine for resuming USB devices.  It calls the
+ * resume method for @udev and then calls the resume methods for all
+ * the interface drivers in @udev.
+ *
+ * Autoresume requests originating from a child device or an interface
+ * driver may be made without the protection of @udev's device lock, but
+ * all other resume calls will hold the lock.  Usbcore will insure that
+ * method calls do not arrive during bind, unbind, or reset operations.
+ * However drivers must be prepared to handle resume calls arriving at
+ * unpredictable times.
+ *
+ * This routine can run only in process context.
+ *
+ * Return: 0 on success.
+ */
+static int usb_resume_both(struct usb_device *udev, pm_message_t msg)
+{
+	int			status = 0;
+	int			i;
+	struct usb_interface	*intf;
+
+	if (udev->state == USB_STATE_NOTATTACHED) {
+		status = -ENODEV;
+		goto done;
+	}
+	udev->can_submit = 1;
+
+	/* Resume the device */
+	if (udev->state == USB_STATE_SUSPENDED || udev->reset_resume)
+		status = usb_resume_device(udev, msg);
+
+	/* Resume the interfaces */
+	if (status == 0 && udev->actconfig) {
+		for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+			intf = udev->actconfig->interface[i];
+			usb_resume_interface(udev, intf, msg,
+					udev->reset_resume);
+		}
+	}
+	usb_mark_last_busy(udev);
+
+ done:
+	dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status);
+	if (!status)
+		udev->reset_resume = 0;
+	return status;
+}
+
+static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
+{
+	int	w;
+
+	/*
+	 * For FREEZE/QUIESCE, disable remote wakeups so no interrupts get
+	 * generated.
+	 */
+	if (msg.event == PM_EVENT_FREEZE || msg.event == PM_EVENT_QUIESCE) {
+		w = 0;
+
+	} else {
+		/*
+		 * Enable remote wakeup if it is allowed, even if no interface
+		 * drivers actually want it.
+		 */
+		w = device_may_wakeup(&udev->dev);
+	}
+
+	/*
+	 * If the device is autosuspended with the wrong wakeup setting,
+	 * autoresume now so the setting can be changed.
+	 */
+	if (udev->state == USB_STATE_SUSPENDED && w != udev->do_remote_wakeup)
+		pm_runtime_resume(&udev->dev);
+	udev->do_remote_wakeup = w;
+}
+
+/* The device lock is held by the PM core */
+int usb_suspend(struct device *dev, pm_message_t msg)
+{
+	struct usb_device	*udev = to_usb_device(dev);
+	int r;
+
+	unbind_no_pm_drivers_interfaces(udev);
+
+	/* From now on we are sure all drivers support suspend/resume
+	 * but not necessarily reset_resume()
+	 * so we may still need to unbind and rebind upon resume
+	 */
+	choose_wakeup(udev, msg);
+	r = usb_suspend_both(udev, msg);
+	if (r)
+		return r;
+
+	if (udev->quirks & USB_QUIRK_DISCONNECT_SUSPEND)
+		usb_port_disable(udev);
+
+	return 0;
+}
+
+/* The device lock is held by the PM core */
+int usb_resume_complete(struct device *dev)
+{
+	struct usb_device *udev = to_usb_device(dev);
+
+	/* For PM complete calls, all we do is rebind interfaces
+	 * whose needs_binding flag is set
+	 */
+	if (udev->state != USB_STATE_NOTATTACHED)
+		rebind_marked_interfaces(udev);
+	return 0;
+}
+
+/* The device lock is held by the PM core */
+int usb_resume(struct device *dev, pm_message_t msg)
+{
+	struct usb_device	*udev = to_usb_device(dev);
+	int			status;
+
+	/* For all calls, take the device back to full power and
+	 * tell the PM core in case it was autosuspended previously.
+	 * Unbind the interfaces that will need rebinding later,
+	 * because they fail to support reset_resume.
+	 * (This can't be done in usb_resume_interface()
+	 * above because it doesn't own the right set of locks.)
+	 */
+	status = usb_resume_both(udev, msg);
+	if (status == 0) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+		unbind_marked_interfaces(udev);
+	}
+
+	/* Avoid PM error messages for devices disconnected while suspended
+	 * as we'll display regular disconnect messages just a bit later.
+	 */
+	if (status == -ENODEV || status == -ESHUTDOWN)
+		status = 0;
+	return status;
+}
+
+/**
+ * usb_enable_autosuspend - allow a USB device to be autosuspended
+ * @udev: the USB device which may be autosuspended
+ *
+ * This routine allows @udev to be autosuspended.  An autosuspend won't
+ * take place until the autosuspend_delay has elapsed and all the other
+ * necessary conditions are satisfied.
+ *
+ * The caller must hold @udev's device lock.
+ */
+void usb_enable_autosuspend(struct usb_device *udev)
+{
+	pm_runtime_allow(&udev->dev);
+}
+EXPORT_SYMBOL_GPL(usb_enable_autosuspend);
+
+/**
+ * usb_disable_autosuspend - prevent a USB device from being autosuspended
+ * @udev: the USB device which may not be autosuspended
+ *
+ * This routine prevents @udev from being autosuspended and wakes it up
+ * if it is already autosuspended.
+ *
+ * The caller must hold @udev's device lock.
+ */
+void usb_disable_autosuspend(struct usb_device *udev)
+{
+	pm_runtime_forbid(&udev->dev);
+}
+EXPORT_SYMBOL_GPL(usb_disable_autosuspend);
+
+/**
+ * usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces
+ * @udev: the usb_device to autosuspend
+ *
+ * This routine should be called when a core subsystem is finished using
+ * @udev and wants to allow it to autosuspend.  Examples would be when
+ * @udev's device file in usbfs is closed or after a configuration change.
+ *
+ * @udev's usage counter is decremented; if it drops to 0 and all the
+ * interfaces are inactive then a delayed autosuspend will be attempted.
+ * The attempt may fail (see autosuspend_check()).
+ *
+ * The caller must hold @udev's device lock.
+ *
+ * This routine can run only in process context.
+ */
+void usb_autosuspend_device(struct usb_device *udev)
+{
+	int	status;
+
+	usb_mark_last_busy(udev);
+	status = pm_runtime_put_sync_autosuspend(&udev->dev);
+	dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&udev->dev.power.usage_count),
+			status);
+}
+
+/**
+ * usb_autoresume_device - immediately autoresume a USB device and its interfaces
+ * @udev: the usb_device to autoresume
+ *
+ * This routine should be called when a core subsystem wants to use @udev
+ * and needs to guarantee that it is not suspended.  No autosuspend will
+ * occur until usb_autosuspend_device() is called.  (Note that this will
+ * not prevent suspend events originating in the PM core.)  Examples would
+ * be when @udev's device file in usbfs is opened or when a remote-wakeup
+ * request is received.
+ *
+ * @udev's usage counter is incremented to prevent subsequent autosuspends.
+ * However if the autoresume fails then the usage counter is re-decremented.
+ *
+ * The caller must hold @udev's device lock.
+ *
+ * This routine can run only in process context.
+ *
+ * Return: 0 on success. A negative error code otherwise.
+ */
+int usb_autoresume_device(struct usb_device *udev)
+{
+	int	status;
+
+	status = pm_runtime_get_sync(&udev->dev);
+	if (status < 0)
+		pm_runtime_put_sync(&udev->dev);
+	dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&udev->dev.power.usage_count),
+			status);
+	if (status > 0)
+		status = 0;
+	return status;
+}
+
+/**
+ * usb_autopm_put_interface - decrement a USB interface's PM-usage counter
+ * @intf: the usb_interface whose counter should be decremented
+ *
+ * This routine should be called by an interface driver when it is
+ * finished using @intf and wants to allow it to autosuspend.  A typical
+ * example would be a character-device driver when its device file is
+ * closed.
+ *
+ * The routine decrements @intf's usage counter.  When the counter reaches
+ * 0, a delayed autosuspend request for @intf's device is attempted.  The
+ * attempt may fail (see autosuspend_check()).
+ *
+ * This routine can run only in process context.
+ */
+void usb_autopm_put_interface(struct usb_interface *intf)
+{
+	struct usb_device	*udev = interface_to_usbdev(intf);
+	int			status;
+
+	usb_mark_last_busy(udev);
+	status = pm_runtime_put_sync(&intf->dev);
+	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&intf->dev.power.usage_count),
+			status);
+}
+EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
+
+/**
+ * usb_autopm_put_interface_async - decrement a USB interface's PM-usage counter
+ * @intf: the usb_interface whose counter should be decremented
+ *
+ * This routine does much the same thing as usb_autopm_put_interface():
+ * It decrements @intf's usage counter and schedules a delayed
+ * autosuspend request if the counter is <= 0.  The difference is that it
+ * does not perform any synchronization; callers should hold a private
+ * lock and handle all synchronization issues themselves.
+ *
+ * Typically a driver would call this routine during an URB's completion
+ * handler, if no more URBs were pending.
+ *
+ * This routine can run in atomic context.
+ */
+void usb_autopm_put_interface_async(struct usb_interface *intf)
+{
+	struct usb_device	*udev = interface_to_usbdev(intf);
+	int			status;
+
+	usb_mark_last_busy(udev);
+	status = pm_runtime_put(&intf->dev);
+	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&intf->dev.power.usage_count),
+			status);
+}
+EXPORT_SYMBOL_GPL(usb_autopm_put_interface_async);
+
+/**
+ * usb_autopm_put_interface_no_suspend - decrement a USB interface's PM-usage counter
+ * @intf: the usb_interface whose counter should be decremented
+ *
+ * This routine decrements @intf's usage counter but does not carry out an
+ * autosuspend.
+ *
+ * This routine can run in atomic context.
+ */
+void usb_autopm_put_interface_no_suspend(struct usb_interface *intf)
+{
+	struct usb_device	*udev = interface_to_usbdev(intf);
+
+	usb_mark_last_busy(udev);
+	pm_runtime_put_noidle(&intf->dev);
+}
+EXPORT_SYMBOL_GPL(usb_autopm_put_interface_no_suspend);
+
+/**
+ * usb_autopm_get_interface - increment a USB interface's PM-usage counter
+ * @intf: the usb_interface whose counter should be incremented
+ *
+ * This routine should be called by an interface driver when it wants to
+ * use @intf and needs to guarantee that it is not suspended.  In addition,
+ * the routine prevents @intf from being autosuspended subsequently.  (Note
+ * that this will not prevent suspend events originating in the PM core.)
+ * This prevention will persist until usb_autopm_put_interface() is called
+ * or @intf is unbound.  A typical example would be a character-device
+ * driver when its device file is opened.
+ *
+ * @intf's usage counter is incremented to prevent subsequent autosuspends.
+ * However if the autoresume fails then the counter is re-decremented.
+ *
+ * This routine can run only in process context.
+ *
+ * Return: 0 on success.
+ */
+int usb_autopm_get_interface(struct usb_interface *intf)
+{
+	int	status;
+
+	status = pm_runtime_get_sync(&intf->dev);
+	if (status < 0)
+		pm_runtime_put_sync(&intf->dev);
+	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&intf->dev.power.usage_count),
+			status);
+	if (status > 0)
+		status = 0;
+	return status;
+}
+EXPORT_SYMBOL_GPL(usb_autopm_get_interface);
+
+/**
+ * usb_autopm_get_interface_async - increment a USB interface's PM-usage counter
+ * @intf: the usb_interface whose counter should be incremented
+ *
+ * This routine does much the same thing as
+ * usb_autopm_get_interface(): It increments @intf's usage counter and
+ * queues an autoresume request if the device is suspended.  The
+ * differences are that it does not perform any synchronization (callers
+ * should hold a private lock and handle all synchronization issues
+ * themselves), and it does not autoresume the device directly (it only
+ * queues a request).  After a successful call, the device may not yet be
+ * resumed.
+ *
+ * This routine can run in atomic context.
+ *
+ * Return: 0 on success. A negative error code otherwise.
+ */
+int usb_autopm_get_interface_async(struct usb_interface *intf)
+{
+	int	status;
+
+	status = pm_runtime_get(&intf->dev);
+	if (status < 0 && status != -EINPROGRESS)
+		pm_runtime_put_noidle(&intf->dev);
+	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&intf->dev.power.usage_count),
+			status);
+	if (status > 0 || status == -EINPROGRESS)
+		status = 0;
+	return status;
+}
+EXPORT_SYMBOL_GPL(usb_autopm_get_interface_async);
+
+/**
+ * usb_autopm_get_interface_no_resume - increment a USB interface's PM-usage counter
+ * @intf: the usb_interface whose counter should be incremented
+ *
+ * This routine increments @intf's usage counter but does not carry out an
+ * autoresume.
+ *
+ * This routine can run in atomic context.
+ */
+void usb_autopm_get_interface_no_resume(struct usb_interface *intf)
+{
+	struct usb_device	*udev = interface_to_usbdev(intf);
+
+	usb_mark_last_busy(udev);
+	pm_runtime_get_noresume(&intf->dev);
+}
+EXPORT_SYMBOL_GPL(usb_autopm_get_interface_no_resume);
+
+/* Internal routine to check whether we may autosuspend a device. */
+static int autosuspend_check(struct usb_device *udev)
+{
+	int			w, i;
+	struct usb_interface	*intf;
+
+	if (udev->state == USB_STATE_NOTATTACHED)
+		return -ENODEV;
+
+	/* Fail if autosuspend is disabled, or any interfaces are in use, or
+	 * any interface drivers require remote wakeup but it isn't available.
+	 */
+	w = 0;
+	if (udev->actconfig) {
+		for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+			intf = udev->actconfig->interface[i];
+
+			/* We don't need to check interfaces that are
+			 * disabled for runtime PM.  Either they are unbound
+			 * or else their drivers don't support autosuspend
+			 * and so they are permanently active.
+			 */
+			if (intf->dev.power.disable_depth)
+				continue;
+			if (atomic_read(&intf->dev.power.usage_count) > 0)
+				return -EBUSY;
+			w |= intf->needs_remote_wakeup;
+
+			/* Don't allow autosuspend if the device will need
+			 * a reset-resume and any of its interface drivers
+			 * doesn't include support or needs remote wakeup.
+			 */
+			if (udev->quirks & USB_QUIRK_RESET_RESUME) {
+				struct usb_driver *driver;
+
+				driver = to_usb_driver(intf->dev.driver);
+				if (!driver->reset_resume ||
+						intf->needs_remote_wakeup)
+					return -EOPNOTSUPP;
+			}
+		}
+	}
+	if (w && !device_can_wakeup(&udev->dev)) {
+		dev_dbg(&udev->dev, "remote wakeup needed for autosuspend\n");
+		return -EOPNOTSUPP;
+	}
+
+	/*
+	 * If the device is a direct child of the root hub and the HCD
+	 * doesn't handle wakeup requests, don't allow autosuspend when
+	 * wakeup is needed.
+	 */
+	if (w && udev->parent == udev->bus->root_hub &&
+			bus_to_hcd(udev->bus)->cant_recv_wakeups) {
+		dev_dbg(&udev->dev, "HCD doesn't handle wakeup requests\n");
+		return -EOPNOTSUPP;
+	}
+
+	udev->do_remote_wakeup = w;
+	return 0;
+}
+
+int usb_runtime_suspend(struct device *dev)
+{
+	struct usb_device	*udev = to_usb_device(dev);
+	int			status;
+
+	/* A USB device can be suspended if it passes the various autosuspend
+	 * checks.  Runtime suspend for a USB device means suspending all the
+	 * interfaces and then the device itself.
+	 */
+	if (autosuspend_check(udev) != 0)
+		return -EAGAIN;
+
+	status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND);
+
+	/* Allow a retry if autosuspend failed temporarily */
+	if (status == -EAGAIN || status == -EBUSY)
+		usb_mark_last_busy(udev);
+
+	/*
+	 * The PM core reacts badly unless the return code is 0,
+	 * -EAGAIN, or -EBUSY, so always return -EBUSY on an error
+	 * (except for root hubs, because they don't suspend through
+	 * an upstream port like other USB devices).
+	 */
+	if (status != 0 && udev->parent)
+		return -EBUSY;
+	return status;
+}
+
+int usb_runtime_resume(struct device *dev)
+{
+	struct usb_device	*udev = to_usb_device(dev);
+	int			status;
+
+	/* Runtime resume for a USB device means resuming both the device
+	 * and all its interfaces.
+	 */
+	status = usb_resume_both(udev, PMSG_AUTO_RESUME);
+	return status;
+}
+
+int usb_runtime_idle(struct device *dev)
+{
+	struct usb_device	*udev = to_usb_device(dev);
+
+	/* An idle USB device can be suspended if it passes the various
+	 * autosuspend checks.
+	 */
+	if (autosuspend_check(udev) == 0)
+		pm_runtime_autosuspend(dev);
+	/* Tell the core not to suspend it, though. */
+	return -EBUSY;
+}
+
+static int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+	int ret = -EPERM;
+
+	if (hcd->driver->set_usb2_hw_lpm) {
+		ret = hcd->driver->set_usb2_hw_lpm(hcd, udev, enable);
+		if (!ret)
+			udev->usb2_hw_lpm_enabled = enable;
+	}
+
+	return ret;
+}
+
+int usb_enable_usb2_hardware_lpm(struct usb_device *udev)
+{
+	if (!udev->usb2_hw_lpm_capable ||
+	    !udev->usb2_hw_lpm_allowed ||
+	    udev->usb2_hw_lpm_enabled)
+		return 0;
+
+	return usb_set_usb2_hardware_lpm(udev, 1);
+}
+
+int usb_disable_usb2_hardware_lpm(struct usb_device *udev)
+{
+	if (!udev->usb2_hw_lpm_enabled)
+		return 0;
+
+	return usb_set_usb2_hardware_lpm(udev, 0);
+}
+
+#endif /* CONFIG_PM */
+
+struct bus_type usb_bus_type = {
+	.name =		"usb",
+	.match =	usb_device_match,
+	.uevent =	usb_uevent,
+	.need_parent_lock =	true,
+};
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
new file mode 100644
index 000000000..a2530811c
--- /dev/null
+++ b/drivers/usb/core/endpoint.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * drivers/usb/core/endpoint.c
+ *
+ * (C) Copyright 2002,2004,2006 Greg Kroah-Hartman
+ * (C) Copyright 2002,2004 IBM Corp.
+ * (C) Copyright 2006 Novell Inc.
+ *
+ * Released under the GPLv2 only.
+ *
+ * Endpoint sysfs stuff
+ */
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include "usb.h"
+
+struct ep_device {
+	struct usb_endpoint_descriptor *desc;
+	struct usb_device *udev;
+	struct device dev;
+};
+#define to_ep_device(_dev) \
+	container_of(_dev, struct ep_device, dev)
+
+struct ep_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct usb_device *,
+			struct usb_endpoint_descriptor *, char *);
+};
+#define to_ep_attribute(_attr) \
+	container_of(_attr, struct ep_attribute, attr)
+
+#define usb_ep_attr(field, format_string)			\
+static ssize_t field##_show(struct device *dev,			\
+			       struct device_attribute *attr,	\
+			       char *buf)			\
+{								\
+	struct ep_device *ep = to_ep_device(dev);		\
+	return sprintf(buf, format_string, ep->desc->field);	\
+}								\
+static DEVICE_ATTR_RO(field)
+
+usb_ep_attr(bLength, "%02x\n");
+usb_ep_attr(bEndpointAddress, "%02x\n");
+usb_ep_attr(bmAttributes, "%02x\n");
+usb_ep_attr(bInterval, "%02x\n");
+
+static ssize_t wMaxPacketSize_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct ep_device *ep = to_ep_device(dev);
+	return sprintf(buf, "%04x\n", usb_endpoint_maxp(ep->desc));
+}
+static DEVICE_ATTR_RO(wMaxPacketSize);
+
+static ssize_t type_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct ep_device *ep = to_ep_device(dev);
+	char *type = "unknown";
+
+	switch (usb_endpoint_type(ep->desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		type = "Control";
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		type = "Isoc";
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		type = "Bulk";
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		type = "Interrupt";
+		break;
+	}
+	return sprintf(buf, "%s\n", type);
+}
+static DEVICE_ATTR_RO(type);
+
+static ssize_t interval_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct ep_device *ep = to_ep_device(dev);
+	unsigned int interval;
+	char unit;
+
+	interval = usb_decode_interval(ep->desc, ep->udev->speed);
+	if (interval % 1000) {
+		unit = 'u';
+	} else {
+		unit = 'm';
+		interval /= 1000;
+	}
+
+	return sprintf(buf, "%d%cs\n", interval, unit);
+}
+static DEVICE_ATTR_RO(interval);
+
+static ssize_t direction_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct ep_device *ep = to_ep_device(dev);
+	char *direction;
+
+	if (usb_endpoint_xfer_control(ep->desc))
+		direction = "both";
+	else if (usb_endpoint_dir_in(ep->desc))
+		direction = "in";
+	else
+		direction = "out";
+	return sprintf(buf, "%s\n", direction);
+}
+static DEVICE_ATTR_RO(direction);
+
+static struct attribute *ep_dev_attrs[] = {
+	&dev_attr_bLength.attr,
+	&dev_attr_bEndpointAddress.attr,
+	&dev_attr_bmAttributes.attr,
+	&dev_attr_bInterval.attr,
+	&dev_attr_wMaxPacketSize.attr,
+	&dev_attr_interval.attr,
+	&dev_attr_type.attr,
+	&dev_attr_direction.attr,
+	NULL,
+};
+static const struct attribute_group ep_dev_attr_grp = {
+	.attrs = ep_dev_attrs,
+};
+static const struct attribute_group *ep_dev_groups[] = {
+	&ep_dev_attr_grp,
+	NULL
+};
+
+static void ep_device_release(struct device *dev)
+{
+	struct ep_device *ep_dev = to_ep_device(dev);
+
+	kfree(ep_dev);
+}
+
+struct device_type usb_ep_device_type = {
+	.name =		"usb_endpoint",
+	.release = ep_device_release,
+};
+
+int usb_create_ep_devs(struct device *parent,
+			struct usb_host_endpoint *endpoint,
+			struct usb_device *udev)
+{
+	struct ep_device *ep_dev;
+	int retval;
+
+	ep_dev = kzalloc(sizeof(*ep_dev), GFP_KERNEL);
+	if (!ep_dev) {
+		retval = -ENOMEM;
+		goto exit;
+	}
+
+	ep_dev->desc = &endpoint->desc;
+	ep_dev->udev = udev;
+	ep_dev->dev.groups = ep_dev_groups;
+	ep_dev->dev.type = &usb_ep_device_type;
+	ep_dev->dev.parent = parent;
+	dev_set_name(&ep_dev->dev, "ep_%02x", endpoint->desc.bEndpointAddress);
+
+	retval = device_register(&ep_dev->dev);
+	if (retval)
+		goto error_register;
+
+	device_enable_async_suspend(&ep_dev->dev);
+	endpoint->ep_dev = ep_dev;
+	return retval;
+
+error_register:
+	put_device(&ep_dev->dev);
+exit:
+	return retval;
+}
+
+void usb_remove_ep_devs(struct usb_host_endpoint *endpoint)
+{
+	struct ep_device *ep_dev = endpoint->ep_dev;
+
+	if (ep_dev) {
+		device_unregister(&ep_dev->dev);
+		endpoint->ep_dev = NULL;
+	}
+}
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
new file mode 100644
index 000000000..558890ada
--- /dev/null
+++ b/drivers/usb/core/file.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * drivers/usb/core/file.c
+ *
+ * (C) Copyright Linus Torvalds 1999
+ * (C) Copyright Johannes Erdfelt 1999-2001
+ * (C) Copyright Andreas Gal 1999
+ * (C) Copyright Gregory P. Smith 1999
+ * (C) Copyright Deti Fliegl 1999 (new USB architecture)
+ * (C) Copyright Randy Dunlap 2000
+ * (C) Copyright David Brownell 2000-2001 (kernel hotplug, usb_device_id,
+ *	more docs, etc)
+ * (C) Copyright Yggdrasil Computing, Inc. 2000
+ *     (usb_device_id matching changes by Adam J. Richter)
+ * (C) Copyright Greg Kroah-Hartman 2002-2003
+ *
+ * Released under the GPLv2 only.
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/usb.h>
+
+#include "usb.h"
+
+#define MAX_USB_MINORS	256
+static const struct file_operations *usb_minors[MAX_USB_MINORS];
+static DECLARE_RWSEM(minor_rwsem);
+static DEFINE_MUTEX(init_usb_class_mutex);
+
+static int usb_open(struct inode *inode, struct file *file)
+{
+	int err = -ENODEV;
+	const struct file_operations *new_fops;
+
+	down_read(&minor_rwsem);
+	new_fops = fops_get(usb_minors[iminor(inode)]);
+
+	if (!new_fops)
+		goto done;
+
+	replace_fops(file, new_fops);
+	/* Curiouser and curiouser... NULL ->open() as "no device" ? */
+	if (file->f_op->open)
+		err = file->f_op->open(inode, file);
+ done:
+	up_read(&minor_rwsem);
+	return err;
+}
+
+static const struct file_operations usb_fops = {
+	.owner =	THIS_MODULE,
+	.open =		usb_open,
+	.llseek =	noop_llseek,
+};
+
+static struct usb_class {
+	struct kref kref;
+	struct class *class;
+} *usb_class;
+
+static char *usb_devnode(struct device *dev, umode_t *mode)
+{
+	struct usb_class_driver *drv;
+
+	drv = dev_get_drvdata(dev);
+	if (!drv || !drv->devnode)
+		return NULL;
+	return drv->devnode(dev, mode);
+}
+
+static int init_usb_class(void)
+{
+	int result = 0;
+
+	if (usb_class != NULL) {
+		kref_get(&usb_class->kref);
+		goto exit;
+	}
+
+	usb_class = kmalloc(sizeof(*usb_class), GFP_KERNEL);
+	if (!usb_class) {
+		result = -ENOMEM;
+		goto exit;
+	}
+
+	kref_init(&usb_class->kref);
+	usb_class->class = class_create(THIS_MODULE, "usbmisc");
+	if (IS_ERR(usb_class->class)) {
+		result = PTR_ERR(usb_class->class);
+		printk(KERN_ERR "class_create failed for usb devices\n");
+		kfree(usb_class);
+		usb_class = NULL;
+		goto exit;
+	}
+	usb_class->class->devnode = usb_devnode;
+
+exit:
+	return result;
+}
+
+static void release_usb_class(struct kref *kref)
+{
+	/* Ok, we cheat as we know we only have one usb_class */
+	class_destroy(usb_class->class);
+	kfree(usb_class);
+	usb_class = NULL;
+}
+
+static void destroy_usb_class(void)
+{
+	mutex_lock(&init_usb_class_mutex);
+	kref_put(&usb_class->kref, release_usb_class);
+	mutex_unlock(&init_usb_class_mutex);
+}
+
+int usb_major_init(void)
+{
+	int error;
+
+	error = register_chrdev(USB_MAJOR, "usb", &usb_fops);
+	if (error)
+		printk(KERN_ERR "Unable to get major %d for usb devices\n",
+		       USB_MAJOR);
+
+	return error;
+}
+
+void usb_major_cleanup(void)
+{
+	unregister_chrdev(USB_MAJOR, "usb");
+}
+
+/**
+ * usb_register_dev - register a USB device, and ask for a minor number
+ * @intf: pointer to the usb_interface that is being registered
+ * @class_driver: pointer to the usb_class_driver for this device
+ *
+ * This should be called by all USB drivers that use the USB major number.
+ * If CONFIG_USB_DYNAMIC_MINORS is enabled, the minor number will be
+ * dynamically allocated out of the list of available ones.  If it is not
+ * enabled, the minor number will be based on the next available free minor,
+ * starting at the class_driver->minor_base.
+ *
+ * This function also creates a usb class device in the sysfs tree.
+ *
+ * usb_deregister_dev() must be called when the driver is done with
+ * the minor numbers given out by this function.
+ *
+ * Return: -EINVAL if something bad happens with trying to register a
+ * device, and 0 on success.
+ */
+int usb_register_dev(struct usb_interface *intf,
+		     struct usb_class_driver *class_driver)
+{
+	int retval;
+	int minor_base = class_driver->minor_base;
+	int minor;
+	char name[20];
+
+#ifdef CONFIG_USB_DYNAMIC_MINORS
+	/*
+	 * We don't care what the device tries to start at, we want to start
+	 * at zero to pack the devices into the smallest available space with
+	 * no holes in the minor range.
+	 */
+	minor_base = 0;
+#endif
+
+	if (class_driver->fops == NULL)
+		return -EINVAL;
+	if (intf->minor >= 0)
+		return -EADDRINUSE;
+
+	mutex_lock(&init_usb_class_mutex);
+	retval = init_usb_class();
+	mutex_unlock(&init_usb_class_mutex);
+
+	if (retval)
+		return retval;
+
+	dev_dbg(&intf->dev, "looking for a minor, starting at %d\n", minor_base);
+
+	down_write(&minor_rwsem);
+	for (minor = minor_base; minor < MAX_USB_MINORS; ++minor) {
+		if (usb_minors[minor])
+			continue;
+
+		usb_minors[minor] = class_driver->fops;
+		intf->minor = minor;
+		break;
+	}
+	if (intf->minor < 0) {
+		up_write(&minor_rwsem);
+		return -EXFULL;
+	}
+
+	/* create a usb class device for this usb interface */
+	snprintf(name, sizeof(name), class_driver->name, minor - minor_base);
+	intf->usb_dev = device_create(usb_class->class, &intf->dev,
+				      MKDEV(USB_MAJOR, minor), class_driver,
+				      "%s", kbasename(name));
+	if (IS_ERR(intf->usb_dev)) {
+		usb_minors[minor] = NULL;
+		intf->minor = -1;
+		retval = PTR_ERR(intf->usb_dev);
+	}
+	up_write(&minor_rwsem);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(usb_register_dev);
+
+/**
+ * usb_deregister_dev - deregister a USB device's dynamic minor.
+ * @intf: pointer to the usb_interface that is being deregistered
+ * @class_driver: pointer to the usb_class_driver for this device
+ *
+ * Used in conjunction with usb_register_dev().  This function is called
+ * when the USB driver is finished with the minor numbers gotten from a
+ * call to usb_register_dev() (usually when the device is disconnected
+ * from the system.)
+ *
+ * This function also removes the usb class device from the sysfs tree.
+ *
+ * This should be called by all drivers that use the USB major number.
+ */
+void usb_deregister_dev(struct usb_interface *intf,
+			struct usb_class_driver *class_driver)
+{
+	if (intf->minor == -1)
+		return;
+
+	dev_dbg(&intf->dev, "removing %d minor\n", intf->minor);
+	device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor));
+
+	down_write(&minor_rwsem);
+	usb_minors[intf->minor] = NULL;
+	up_write(&minor_rwsem);
+
+	intf->usb_dev = NULL;
+	intf->minor = -1;
+	destroy_usb_class();
+}
+EXPORT_SYMBOL_GPL(usb_deregister_dev);
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
new file mode 100644
index 000000000..740342a28
--- /dev/null
+++ b/drivers/usb/core/generic.c
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * drivers/usb/core/generic.c - generic driver for USB devices (not interfaces)
+ *
+ * (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * based on drivers/usb/usb.c which had the following copyrights:
+ *	(C) Copyright Linus Torvalds 1999
+ *	(C) Copyright Johannes Erdfelt 1999-2001
+ *	(C) Copyright Andreas Gal 1999
+ *	(C) Copyright Gregory P. Smith 1999
+ *	(C) Copyright Deti Fliegl 1999 (new USB architecture)
+ *	(C) Copyright Randy Dunlap 2000
+ *	(C) Copyright David Brownell 2000-2004
+ *	(C) Copyright Yggdrasil Computing, Inc. 2000
+ *		(usb_device_id matching changes by Adam J. Richter)
+ *	(C) Copyright Greg Kroah-Hartman 2002-2003
+ *
+ * Released under the GPLv2 only.
+ */
+
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <uapi/linux/usb/audio.h>
+#include "usb.h"
+
+static inline const char *plural(int n)
+{
+	return (n == 1 ? "" : "s");
+}
+
+static int is_rndis(struct usb_interface_descriptor *desc)
+{
+	return desc->bInterfaceClass == USB_CLASS_COMM
+		&& desc->bInterfaceSubClass == 2
+		&& desc->bInterfaceProtocol == 0xff;
+}
+
+static int is_activesync(struct usb_interface_descriptor *desc)
+{
+	return desc->bInterfaceClass == USB_CLASS_MISC
+		&& desc->bInterfaceSubClass == 1
+		&& desc->bInterfaceProtocol == 1;
+}
+
+static bool is_audio(struct usb_interface_descriptor *desc)
+{
+	return desc->bInterfaceClass == USB_CLASS_AUDIO;
+}
+
+static bool is_uac3_config(struct usb_interface_descriptor *desc)
+{
+	return desc->bInterfaceProtocol == UAC_VERSION_3;
+}
+
+int usb_choose_configuration(struct usb_device *udev)
+{
+	int i;
+	int num_configs;
+	int insufficient_power = 0;
+	struct usb_host_config *c, *best;
+
+	if (usb_device_is_owned(udev))
+		return 0;
+
+	best = NULL;
+	c = udev->config;
+	num_configs = udev->descriptor.bNumConfigurations;
+	for (i = 0; i < num_configs; (i++, c++)) {
+		struct usb_interface_descriptor	*desc = NULL;
+
+		/* It's possible that a config has no interfaces! */
+		if (c->desc.bNumInterfaces > 0)
+			desc = &c->intf_cache[0]->altsetting->desc;
+
+		/*
+		 * HP's USB bus-powered keyboard has only one configuration
+		 * and it claims to be self-powered; other devices may have
+		 * similar errors in their descriptors.  If the next test
+		 * were allowed to execute, such configurations would always
+		 * be rejected and the devices would not work as expected.
+		 * In the meantime, we run the risk of selecting a config
+		 * that requires external power at a time when that power
+		 * isn't available.  It seems to be the lesser of two evils.
+		 *
+		 * Bugzilla #6448 reports a device that appears to crash
+		 * when it receives a GET_DEVICE_STATUS request!  We don't
+		 * have any other way to tell whether a device is self-powered,
+		 * but since we don't use that information anywhere but here,
+		 * the call has been removed.
+		 *
+		 * Maybe the GET_DEVICE_STATUS call and the test below can
+		 * be reinstated when device firmwares become more reliable.
+		 * Don't hold your breath.
+		 */
+#if 0
+		/* Rule out self-powered configs for a bus-powered device */
+		if (bus_powered && (c->desc.bmAttributes &
+					USB_CONFIG_ATT_SELFPOWER))
+			continue;
+#endif
+
+		/*
+		 * The next test may not be as effective as it should be.
+		 * Some hubs have errors in their descriptor, claiming
+		 * to be self-powered when they are really bus-powered.
+		 * We will overestimate the amount of current such hubs
+		 * make available for each port.
+		 *
+		 * This is a fairly benign sort of failure.  It won't
+		 * cause us to reject configurations that we should have
+		 * accepted.
+		 */
+
+		/* Rule out configs that draw too much bus current */
+		if (usb_get_max_power(udev, c) > udev->bus_mA) {
+			insufficient_power++;
+			continue;
+		}
+
+		/*
+		 * Select first configuration as default for audio so that
+		 * devices that don't comply with UAC3 protocol are supported.
+		 * But, still iterate through other configurations and
+		 * select UAC3 compliant config if present.
+		 */
+		if (desc && is_audio(desc)) {
+			/* Always prefer the first found UAC3 config */
+			if (is_uac3_config(desc)) {
+				best = c;
+				break;
+			}
+
+			/* If there is no UAC3 config, prefer the first config */
+			else if (i == 0)
+				best = c;
+
+			/* Unconditional continue, because the rest of the code
+			 * in the loop is irrelevant for audio devices, and
+			 * because it can reassign best, which for audio devices
+			 * we don't want.
+			 */
+			continue;
+		}
+
+		/* When the first config's first interface is one of Microsoft's
+		 * pet nonstandard Ethernet-over-USB protocols, ignore it unless
+		 * this kernel has enabled the necessary host side driver.
+		 * But: Don't ignore it if it's the only config.
+		 */
+		if (i == 0 && num_configs > 1 && desc &&
+				(is_rndis(desc) || is_activesync(desc))) {
+#if !defined(CONFIG_USB_NET_RNDIS_HOST) && !defined(CONFIG_USB_NET_RNDIS_HOST_MODULE)
+			continue;
+#else
+			best = c;
+#endif
+		}
+
+		/* From the remaining configs, choose the first one whose
+		 * first interface is for a non-vendor-specific class.
+		 * Reason: Linux is more likely to have a class driver
+		 * than a vendor-specific driver. */
+		else if (udev->descriptor.bDeviceClass !=
+						USB_CLASS_VENDOR_SPEC &&
+				(desc && desc->bInterfaceClass !=
+						USB_CLASS_VENDOR_SPEC)) {
+			best = c;
+			break;
+		}
+
+		/* If all the remaining configs are vendor-specific,
+		 * choose the first one. */
+		else if (!best)
+			best = c;
+	}
+
+	if (insufficient_power > 0)
+		dev_info(&udev->dev, "rejected %d configuration%s "
+			"due to insufficient available bus power\n",
+			insufficient_power, plural(insufficient_power));
+
+	if (best) {
+		i = best->desc.bConfigurationValue;
+		dev_dbg(&udev->dev,
+			"configuration #%d chosen from %d choice%s\n",
+			i, num_configs, plural(num_configs));
+	} else {
+		i = -1;
+		dev_warn(&udev->dev,
+			"no configuration chosen from %d choice%s\n",
+			num_configs, plural(num_configs));
+	}
+	return i;
+}
+EXPORT_SYMBOL_GPL(usb_choose_configuration);
+
+static int __check_for_non_generic_match(struct device_driver *drv, void *data)
+{
+	struct usb_device *udev = data;
+	struct usb_device_driver *udrv;
+
+	if (!is_usb_device_driver(drv))
+		return 0;
+	udrv = to_usb_device_driver(drv);
+	if (udrv == &usb_generic_driver)
+		return 0;
+	return usb_driver_applicable(udev, udrv);
+}
+
+static bool usb_generic_driver_match(struct usb_device *udev)
+{
+	if (udev->use_generic_driver)
+		return true;
+
+	/*
+	 * If any other driver wants the device, leave the device to this other
+	 * driver.
+	 */
+	if (bus_for_each_drv(&usb_bus_type, NULL, udev, __check_for_non_generic_match))
+		return false;
+
+	return true;
+}
+
+int usb_generic_driver_probe(struct usb_device *udev)
+{
+	int err, c;
+
+	/* Choose and set the configuration.  This registers the interfaces
+	 * with the driver core and lets interface drivers bind to them.
+	 */
+	if (udev->authorized == 0)
+		dev_err(&udev->dev, "Device is not authorized for usage\n");
+	else {
+		c = usb_choose_configuration(udev);
+		if (c >= 0) {
+			err = usb_set_configuration(udev, c);
+			if (err && err != -ENODEV) {
+				dev_err(&udev->dev, "can't set config #%d, error %d\n",
+					c, err);
+				/* This need not be fatal.  The user can try to
+				 * set other configurations. */
+			}
+		}
+	}
+	/* USB device state == configured ... usable */
+	usb_notify_add_device(udev);
+
+	return 0;
+}
+
+void usb_generic_driver_disconnect(struct usb_device *udev)
+{
+	usb_notify_remove_device(udev);
+
+	/* if this is only an unbind, not a physical disconnect, then
+	 * unconfigure the device */
+	if (udev->actconfig)
+		usb_set_configuration(udev, -1);
+}
+
+#ifdef	CONFIG_PM
+
+int usb_generic_driver_suspend(struct usb_device *udev, pm_message_t msg)
+{
+	int rc;
+
+	/* Normal USB devices suspend through their upstream port.
+	 * Root hubs don't have upstream ports to suspend,
+	 * so we have to shut down their downstream HC-to-USB
+	 * interfaces manually by doing a bus (or "global") suspend.
+	 */
+	if (!udev->parent)
+		rc = hcd_bus_suspend(udev, msg);
+
+	/*
+	 * Non-root USB2 devices don't need to do anything for FREEZE
+	 * or PRETHAW. USB3 devices don't support global suspend and
+	 * needs to be selectively suspended.
+	 */
+	else if ((msg.event == PM_EVENT_FREEZE || msg.event == PM_EVENT_PRETHAW)
+		 && (udev->speed < USB_SPEED_SUPER))
+		rc = 0;
+	else
+		rc = usb_port_suspend(udev, msg);
+
+	if (rc == 0)
+		usbfs_notify_suspend(udev);
+	return rc;
+}
+
+int usb_generic_driver_resume(struct usb_device *udev, pm_message_t msg)
+{
+	int rc;
+
+	/* Normal USB devices resume/reset through their upstream port.
+	 * Root hubs don't have upstream ports to resume or reset,
+	 * so we have to start up their downstream HC-to-USB
+	 * interfaces manually by doing a bus (or "global") resume.
+	 */
+	if (!udev->parent)
+		rc = hcd_bus_resume(udev, msg);
+	else
+		rc = usb_port_resume(udev, msg);
+
+	if (rc == 0)
+		usbfs_notify_resume(udev);
+	return rc;
+}
+
+#endif	/* CONFIG_PM */
+
+struct usb_device_driver usb_generic_driver = {
+	.name =	"usb",
+	.match = usb_generic_driver_match,
+	.probe = usb_generic_driver_probe,
+	.disconnect = usb_generic_driver_disconnect,
+#ifdef	CONFIG_PM
+	.suspend = usb_generic_driver_suspend,
+	.resume = usb_generic_driver_resume,
+#endif
+	.supports_autosuspend = 1,
+};
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
new file mode 100644
index 000000000..9b77f49b3
--- /dev/null
+++ b/drivers/usb/core/hcd-pci.c
@@ -0,0 +1,626 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright David Brownell 2000-2002
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#ifdef CONFIG_PPC_PMAC
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#endif
+
+#include "usb.h"
+
+
+/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
+
+/*
+ * Coordinate handoffs between EHCI and companion controllers
+ * during EHCI probing and system resume.
+ */
+
+static DECLARE_RWSEM(companions_rwsem);
+
+#define CL_UHCI		PCI_CLASS_SERIAL_USB_UHCI
+#define CL_OHCI		PCI_CLASS_SERIAL_USB_OHCI
+#define CL_EHCI		PCI_CLASS_SERIAL_USB_EHCI
+
+static inline int is_ohci_or_uhci(struct pci_dev *pdev)
+{
+	return pdev->class == CL_OHCI || pdev->class == CL_UHCI;
+}
+
+typedef void (*companion_fn)(struct pci_dev *pdev, struct usb_hcd *hcd,
+		struct pci_dev *companion, struct usb_hcd *companion_hcd);
+
+/* Iterate over PCI devices in the same slot as pdev and call fn for each */
+static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd,
+		companion_fn fn)
+{
+	struct pci_dev		*companion;
+	struct usb_hcd		*companion_hcd;
+	unsigned int		slot = PCI_SLOT(pdev->devfn);
+
+	/*
+	 * Iterate through other PCI functions in the same slot.
+	 * If the function's drvdata isn't set then it isn't bound to
+	 * a USB host controller driver, so skip it.
+	 */
+	companion = NULL;
+	for_each_pci_dev(companion) {
+		if (companion->bus != pdev->bus ||
+				PCI_SLOT(companion->devfn) != slot)
+			continue;
+
+		/*
+		 * Companion device should be either UHCI,OHCI or EHCI host
+		 * controller, otherwise skip.
+		 */
+		if (companion->class != CL_UHCI && companion->class != CL_OHCI &&
+				companion->class != CL_EHCI)
+			continue;
+
+		companion_hcd = pci_get_drvdata(companion);
+		if (!companion_hcd || !companion_hcd->self.root_hub)
+			continue;
+		fn(pdev, hcd, companion, companion_hcd);
+	}
+}
+
+/*
+ * We're about to add an EHCI controller, which will unceremoniously grab
+ * all the port connections away from its companions.  To prevent annoying
+ * error messages, lock the companion's root hub and gracefully unconfigure
+ * it beforehand.  Leave it locked until the EHCI controller is all set.
+ */
+static void ehci_pre_add(struct pci_dev *pdev, struct usb_hcd *hcd,
+		struct pci_dev *companion, struct usb_hcd *companion_hcd)
+{
+	struct usb_device *udev;
+
+	if (is_ohci_or_uhci(companion)) {
+		udev = companion_hcd->self.root_hub;
+		usb_lock_device(udev);
+		usb_set_configuration(udev, 0);
+	}
+}
+
+/*
+ * Adding the EHCI controller has either succeeded or failed.  Set the
+ * companion pointer accordingly, and in either case, reconfigure and
+ * unlock the root hub.
+ */
+static void ehci_post_add(struct pci_dev *pdev, struct usb_hcd *hcd,
+		struct pci_dev *companion, struct usb_hcd *companion_hcd)
+{
+	struct usb_device *udev;
+
+	if (is_ohci_or_uhci(companion)) {
+		if (dev_get_drvdata(&pdev->dev)) {	/* Succeeded */
+			dev_dbg(&pdev->dev, "HS companion for %s\n",
+					dev_name(&companion->dev));
+			companion_hcd->self.hs_companion = &hcd->self;
+		}
+		udev = companion_hcd->self.root_hub;
+		usb_set_configuration(udev, 1);
+		usb_unlock_device(udev);
+	}
+}
+
+/*
+ * We just added a non-EHCI controller.  Find the EHCI controller to
+ * which it is a companion, and store a pointer to the bus structure.
+ */
+static void non_ehci_add(struct pci_dev *pdev, struct usb_hcd *hcd,
+		struct pci_dev *companion, struct usb_hcd *companion_hcd)
+{
+	if (is_ohci_or_uhci(pdev) && companion->class == CL_EHCI) {
+		dev_dbg(&pdev->dev, "FS/LS companion for %s\n",
+				dev_name(&companion->dev));
+		hcd->self.hs_companion = &companion_hcd->self;
+	}
+}
+
+/* We are removing an EHCI controller.  Clear the companions' pointers. */
+static void ehci_remove(struct pci_dev *pdev, struct usb_hcd *hcd,
+		struct pci_dev *companion, struct usb_hcd *companion_hcd)
+{
+	if (is_ohci_or_uhci(companion))
+		companion_hcd->self.hs_companion = NULL;
+}
+
+#ifdef	CONFIG_PM
+
+/* An EHCI controller must wait for its companions before resuming. */
+static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd,
+		struct pci_dev *companion, struct usb_hcd *companion_hcd)
+{
+	if (is_ohci_or_uhci(companion))
+		device_pm_wait_for_dev(&pdev->dev, &companion->dev);
+}
+
+#endif	/* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
+
+/**
+ * usb_hcd_pci_probe - initialize PCI-based HCDs
+ * @dev: USB Host Controller being probed
+ * @driver: USB HC driver handle
+ *
+ * Context: task context, might sleep
+ *
+ * Allocates basic PCI resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ *
+ * Store this function in the HCD's struct pci_driver as probe().
+ *
+ * Return: 0 if successful.
+ */
+int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver)
+{
+	struct usb_hcd		*hcd;
+	int			retval;
+	int			hcd_irq = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	if (!driver)
+		return -EINVAL;
+
+	if (pci_enable_device(dev) < 0)
+		return -ENODEV;
+
+	/*
+	 * The xHCI driver has its own irq management
+	 * make sure irq setup is not touched for xhci in generic hcd code
+	 */
+	if ((driver->flags & HCD_MASK) < HCD_USB3) {
+		retval = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY | PCI_IRQ_MSI);
+		if (retval < 0) {
+			dev_err(&dev->dev,
+			"Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
+				pci_name(dev));
+			retval = -ENODEV;
+			goto disable_pci;
+		}
+		hcd_irq = pci_irq_vector(dev, 0);
+	}
+
+	hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto free_irq_vectors;
+	}
+
+	hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
+			driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
+
+	if (driver->flags & HCD_MEMORY) {
+		/* EHCI, OHCI */
+		hcd->rsrc_start = pci_resource_start(dev, 0);
+		hcd->rsrc_len = pci_resource_len(dev, 0);
+		if (!devm_request_mem_region(&dev->dev, hcd->rsrc_start,
+				hcd->rsrc_len, driver->description)) {
+			dev_dbg(&dev->dev, "controller already in use\n");
+			retval = -EBUSY;
+			goto put_hcd;
+		}
+		hcd->regs = devm_ioremap(&dev->dev, hcd->rsrc_start,
+				hcd->rsrc_len);
+		if (hcd->regs == NULL) {
+			dev_dbg(&dev->dev, "error mapping memory\n");
+			retval = -EFAULT;
+			goto put_hcd;
+		}
+
+	} else {
+		/* UHCI */
+		int	region;
+
+		for (region = 0; region < PCI_STD_NUM_BARS; region++) {
+			if (!(pci_resource_flags(dev, region) &
+					IORESOURCE_IO))
+				continue;
+
+			hcd->rsrc_start = pci_resource_start(dev, region);
+			hcd->rsrc_len = pci_resource_len(dev, region);
+			if (devm_request_region(&dev->dev, hcd->rsrc_start,
+					hcd->rsrc_len, driver->description))
+				break;
+		}
+		if (region == PCI_STD_NUM_BARS) {
+			dev_dbg(&dev->dev, "no i/o regions available\n");
+			retval = -EBUSY;
+			goto put_hcd;
+		}
+	}
+
+	pci_set_master(dev);
+
+	/* Note: dev_set_drvdata must be called while holding the rwsem */
+	if (dev->class == CL_EHCI) {
+		down_write(&companions_rwsem);
+		dev_set_drvdata(&dev->dev, hcd);
+		for_each_companion(dev, hcd, ehci_pre_add);
+		retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
+		if (retval != 0)
+			dev_set_drvdata(&dev->dev, NULL);
+		for_each_companion(dev, hcd, ehci_post_add);
+		up_write(&companions_rwsem);
+	} else {
+		down_read(&companions_rwsem);
+		dev_set_drvdata(&dev->dev, hcd);
+		retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
+		if (retval != 0)
+			dev_set_drvdata(&dev->dev, NULL);
+		else
+			for_each_companion(dev, hcd, non_ehci_add);
+		up_read(&companions_rwsem);
+	}
+
+	if (retval != 0)
+		goto put_hcd;
+	device_wakeup_enable(hcd->self.controller);
+
+	if (pci_dev_run_wake(dev))
+		pm_runtime_put_noidle(&dev->dev);
+	return retval;
+
+put_hcd:
+	usb_put_hcd(hcd);
+free_irq_vectors:
+	if ((driver->flags & HCD_MASK) < HCD_USB3)
+		pci_free_irq_vectors(dev);
+disable_pci:
+	pci_disable_device(dev);
+	dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_pci_probe);
+
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+/**
+ * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
+ * @dev: USB Host Controller being removed
+ *
+ * Context: task context, might sleep
+ *
+ * Reverses the effect of usb_hcd_pci_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ *
+ * Store this function in the HCD's struct pci_driver as remove().
+ */
+void usb_hcd_pci_remove(struct pci_dev *dev)
+{
+	struct usb_hcd		*hcd;
+	int			hcd_driver_flags;
+
+	hcd = pci_get_drvdata(dev);
+	if (!hcd)
+		return;
+
+	hcd_driver_flags = hcd->driver->flags;
+
+	if (pci_dev_run_wake(dev))
+		pm_runtime_get_noresume(&dev->dev);
+
+	/* Fake an interrupt request in order to give the driver a chance
+	 * to test whether the controller hardware has been removed (e.g.,
+	 * cardbus physical eject).
+	 */
+	local_irq_disable();
+	usb_hcd_irq(0, hcd);
+	local_irq_enable();
+
+	/* Note: dev_set_drvdata must be called while holding the rwsem */
+	if (dev->class == CL_EHCI) {
+		down_write(&companions_rwsem);
+		for_each_companion(dev, hcd, ehci_remove);
+		usb_remove_hcd(hcd);
+		dev_set_drvdata(&dev->dev, NULL);
+		up_write(&companions_rwsem);
+	} else {
+		/* Not EHCI; just clear the companion pointer */
+		down_read(&companions_rwsem);
+		hcd->self.hs_companion = NULL;
+		usb_remove_hcd(hcd);
+		dev_set_drvdata(&dev->dev, NULL);
+		up_read(&companions_rwsem);
+	}
+	usb_put_hcd(hcd);
+	if ((hcd_driver_flags & HCD_MASK) < HCD_USB3)
+		pci_free_irq_vectors(dev);
+	pci_disable_device(dev);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
+
+/**
+ * usb_hcd_pci_shutdown - shutdown host controller
+ * @dev: USB Host Controller being shutdown
+ */
+void usb_hcd_pci_shutdown(struct pci_dev *dev)
+{
+	struct usb_hcd		*hcd;
+
+	hcd = pci_get_drvdata(dev);
+	if (!hcd)
+		return;
+
+	if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) &&
+			hcd->driver->shutdown) {
+		hcd->driver->shutdown(hcd);
+		if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
+			free_irq(hcd->irq, hcd);
+		pci_disable_device(dev);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
+
+#ifdef	CONFIG_PM
+
+#ifdef	CONFIG_PPC_PMAC
+static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
+{
+	/* Enanble or disable ASIC clocks for USB */
+	if (machine_is(powermac)) {
+		struct device_node	*of_node;
+
+		of_node = pci_device_to_OF_node(pci_dev);
+		if (of_node)
+			pmac_call_feature(PMAC_FTR_USB_ENABLE,
+					of_node, 0, enable);
+	}
+}
+
+#else
+
+static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable)
+{}
+
+#endif	/* CONFIG_PPC_PMAC */
+
+static int check_root_hub_suspended(struct device *dev)
+{
+	struct usb_hcd		*hcd = dev_get_drvdata(dev);
+
+	if (HCD_RH_RUNNING(hcd)) {
+		dev_warn(dev, "Root hub is not suspended\n");
+		return -EBUSY;
+	}
+	if (hcd->shared_hcd) {
+		hcd = hcd->shared_hcd;
+		if (HCD_RH_RUNNING(hcd)) {
+			dev_warn(dev, "Secondary root hub is not suspended\n");
+			return -EBUSY;
+		}
+	}
+	return 0;
+}
+
+static int suspend_common(struct device *dev, bool do_wakeup)
+{
+	struct pci_dev		*pci_dev = to_pci_dev(dev);
+	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
+	int			retval;
+
+	/* Root hub suspend should have stopped all downstream traffic,
+	 * and all bus master traffic.  And done so for both the interface
+	 * and the stub usb_device (which we check here).  But maybe it
+	 * didn't; writing sysfs power/state files ignores such rules...
+	 */
+	retval = check_root_hub_suspended(dev);
+	if (retval)
+		return retval;
+
+	if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) {
+		/* Optimization: Don't suspend if a root-hub wakeup is
+		 * pending and it would cause the HCD to wake up anyway.
+		 */
+		if (do_wakeup && HCD_WAKEUP_PENDING(hcd))
+			return -EBUSY;
+		if (do_wakeup && hcd->shared_hcd &&
+				HCD_WAKEUP_PENDING(hcd->shared_hcd))
+			return -EBUSY;
+		retval = hcd->driver->pci_suspend(hcd, do_wakeup);
+		suspend_report_result(dev, hcd->driver->pci_suspend, retval);
+
+		/* Check again in case wakeup raced with pci_suspend */
+		if ((retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) ||
+				(retval == 0 && do_wakeup && hcd->shared_hcd &&
+				 HCD_WAKEUP_PENDING(hcd->shared_hcd))) {
+			if (hcd->driver->pci_resume)
+				hcd->driver->pci_resume(hcd, false);
+			retval = -EBUSY;
+		}
+		if (retval)
+			return retval;
+	}
+
+	/* If MSI-X is enabled, the driver will have synchronized all vectors
+	 * in pci_suspend(). If MSI or legacy PCI is enabled, that will be
+	 * synchronized here.
+	 */
+	if (!hcd->msix_enabled)
+		synchronize_irq(pci_irq_vector(pci_dev, 0));
+
+	/* Downstream ports from this root hub should already be quiesced, so
+	 * there will be no DMA activity.  Now we can shut down the upstream
+	 * link (except maybe for PME# resume signaling).  We'll enter a
+	 * low power state during suspend_noirq, if the hardware allows.
+	 */
+	pci_disable_device(pci_dev);
+	return retval;
+}
+
+static int resume_common(struct device *dev, int event)
+{
+	struct pci_dev		*pci_dev = to_pci_dev(dev);
+	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
+	int			retval;
+
+	if (HCD_RH_RUNNING(hcd) ||
+			(hcd->shared_hcd &&
+			 HCD_RH_RUNNING(hcd->shared_hcd))) {
+		dev_dbg(dev, "can't resume, not suspended!\n");
+		return 0;
+	}
+
+	retval = pci_enable_device(pci_dev);
+	if (retval < 0) {
+		dev_err(dev, "can't re-enable after resume, %d!\n", retval);
+		return retval;
+	}
+
+	pci_set_master(pci_dev);
+
+	if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) {
+
+		/*
+		 * Only EHCI controllers have to wait for their companions.
+		 * No locking is needed because PCI controller drivers do not
+		 * get unbound during system resume.
+		 */
+		if (pci_dev->class == CL_EHCI && event != PM_EVENT_AUTO_RESUME)
+			for_each_companion(pci_dev, hcd,
+					ehci_wait_for_companions);
+
+		retval = hcd->driver->pci_resume(hcd,
+				event == PM_EVENT_RESTORE);
+		if (retval) {
+			dev_err(dev, "PCI post-resume error %d!\n", retval);
+			usb_hc_died(hcd);
+		}
+	}
+	return retval;
+}
+
+#ifdef	CONFIG_PM_SLEEP
+
+static int hcd_pci_suspend(struct device *dev)
+{
+	return suspend_common(dev, device_may_wakeup(dev));
+}
+
+static int hcd_pci_suspend_noirq(struct device *dev)
+{
+	struct pci_dev		*pci_dev = to_pci_dev(dev);
+	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
+	int			retval;
+
+	retval = check_root_hub_suspended(dev);
+	if (retval)
+		return retval;
+
+	pci_save_state(pci_dev);
+
+	/* If the root hub is dead rather than suspended, disallow remote
+	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
+	 * dying, so we only need to check the primary roothub.
+	 */
+	if (HCD_DEAD(hcd))
+		device_set_wakeup_enable(dev, 0);
+	dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
+
+	/* Possibly enable remote wakeup,
+	 * choose the appropriate low-power state, and go to that state.
+	 */
+	retval = pci_prepare_to_sleep(pci_dev);
+	if (retval == -EIO) {		/* Low-power not supported */
+		dev_dbg(dev, "--> PCI D0 legacy\n");
+		retval = 0;
+	} else if (retval == 0) {
+		dev_dbg(dev, "--> PCI %s\n",
+				pci_power_name(pci_dev->current_state));
+	} else {
+		suspend_report_result(dev, pci_prepare_to_sleep, retval);
+		return retval;
+	}
+
+	powermac_set_asic(pci_dev, 0);
+	return retval;
+}
+
+static int hcd_pci_resume_noirq(struct device *dev)
+{
+	powermac_set_asic(to_pci_dev(dev), 1);
+	return 0;
+}
+
+static int hcd_pci_resume(struct device *dev)
+{
+	return resume_common(dev, PM_EVENT_RESUME);
+}
+
+static int hcd_pci_restore(struct device *dev)
+{
+	return resume_common(dev, PM_EVENT_RESTORE);
+}
+
+#else
+
+#define hcd_pci_suspend		NULL
+#define hcd_pci_suspend_noirq	NULL
+#define hcd_pci_resume_noirq	NULL
+#define hcd_pci_resume		NULL
+#define hcd_pci_restore		NULL
+
+#endif	/* CONFIG_PM_SLEEP */
+
+static int hcd_pci_runtime_suspend(struct device *dev)
+{
+	int	retval;
+
+	retval = suspend_common(dev, true);
+	if (retval == 0)
+		powermac_set_asic(to_pci_dev(dev), 0);
+	dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval);
+	return retval;
+}
+
+static int hcd_pci_runtime_resume(struct device *dev)
+{
+	int	retval;
+
+	powermac_set_asic(to_pci_dev(dev), 1);
+	retval = resume_common(dev, PM_EVENT_AUTO_RESUME);
+	dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval);
+	return retval;
+}
+
+const struct dev_pm_ops usb_hcd_pci_pm_ops = {
+	.suspend	= hcd_pci_suspend,
+	.suspend_noirq	= hcd_pci_suspend_noirq,
+	.resume_noirq	= hcd_pci_resume_noirq,
+	.resume		= hcd_pci_resume,
+	.freeze		= hcd_pci_suspend,
+	.freeze_noirq	= check_root_hub_suspended,
+	.thaw_noirq	= NULL,
+	.thaw		= hcd_pci_resume,
+	.poweroff	= hcd_pci_suspend,
+	.poweroff_noirq	= hcd_pci_suspend_noirq,
+	.restore_noirq	= hcd_pci_resume_noirq,
+	.restore	= hcd_pci_restore,
+	.runtime_suspend = hcd_pci_runtime_suspend,
+	.runtime_resume	= hcd_pci_runtime_resume,
+};
+EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
+
+#endif	/* CONFIG_PM */
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
new file mode 100644
index 000000000..6af0a31ff
--- /dev/null
+++ b/drivers/usb/core/hcd.c
@@ -0,0 +1,3202 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright Linus Torvalds 1999
+ * (C) Copyright Johannes Erdfelt 1999-2001
+ * (C) Copyright Andreas Gal 1999
+ * (C) Copyright Gregory P. Smith 1999
+ * (C) Copyright Deti Fliegl 1999
+ * (C) Copyright Randy Dunlap 2000
+ * (C) Copyright David Brownell 2000-2002
+ */
+
+#include <linux/bcd.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/sched/task_stack.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+#include <linux/utsname.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/mutex.h>
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/pm_runtime.h>
+#include <linux/types.h>
+#include <linux/genalloc.h>
+#include <linux/io.h>
+#include <linux/kcov.h>
+
+#include <linux/phy/phy.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
+
+#include "usb.h"
+#include "phy.h"
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * USB Host Controller Driver framework
+ *
+ * Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
+ * HCD-specific behaviors/bugs.
+ *
+ * This does error checks, tracks devices and urbs, and delegates to a
+ * "hc_driver" only for code (and data) that really needs to know about
+ * hardware differences.  That includes root hub registers, i/o queues,
+ * and so on ... but as little else as possible.
+ *
+ * Shared code includes most of the "root hub" code (these are emulated,
+ * though each HC's hardware works differently) and PCI glue, plus request
+ * tracking overhead.  The HCD code should only block on spinlocks or on
+ * hardware handshaking; blocking on software events (such as other kernel
+ * threads releasing resources, or completing actions) is all generic.
+ *
+ * Happens the USB 2.0 spec says this would be invisible inside the "USBD",
+ * and includes mostly a "HCDI" (HCD Interface) along with some APIs used
+ * only by the hub driver ... and that neither should be seen or used by
+ * usb client device drivers.
+ *
+ * Contributors of ideas or unattributed patches include: David Brownell,
+ * Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
+ *
+ * HISTORY:
+ * 2002-02-21	Pull in most of the usb_bus support from usb.c; some
+ *		associated cleanup.  "usb_hcd" still != "usb_bus".
+ * 2001-12-12	Initial patch version for Linux 2.5.1 kernel.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* Keep track of which host controller drivers are loaded */
+unsigned long usb_hcds_loaded;
+EXPORT_SYMBOL_GPL(usb_hcds_loaded);
+
+/* host controllers we manage */
+DEFINE_IDR (usb_bus_idr);
+EXPORT_SYMBOL_GPL (usb_bus_idr);
+
+/* used when allocating bus numbers */
+#define USB_MAXBUS		64
+
+/* used when updating list of hcds */
+DEFINE_MUTEX(usb_bus_idr_lock);	/* exported only for usbfs */
+EXPORT_SYMBOL_GPL (usb_bus_idr_lock);
+
+/* used for controlling access to virtual root hubs */
+static DEFINE_SPINLOCK(hcd_root_hub_lock);
+
+/* used when updating an endpoint's URB list */
+static DEFINE_SPINLOCK(hcd_urb_list_lock);
+
+/* used to protect against unlinking URBs after the device is gone */
+static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
+
+/* wait queue for synchronous unlinks */
+DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Sharable chunks of root hub code.
+ */
+
+/*-------------------------------------------------------------------------*/
+#define KERNEL_REL	bin2bcd(LINUX_VERSION_MAJOR)
+#define KERNEL_VER	bin2bcd(LINUX_VERSION_PATCHLEVEL)
+
+/* usb 3.1 root hub device descriptor */
+static const u8 usb31_rh_dev_descriptor[18] = {
+	0x12,       /*  __u8  bLength; */
+	USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
+	0x10, 0x03, /*  __le16 bcdUSB; v3.1 */
+
+	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	    /*  __u8  bDeviceSubClass; */
+	0x03,       /*  __u8  bDeviceProtocol; USB 3 hub */
+	0x09,       /*  __u8  bMaxPacketSize0; 2^9 = 512 Bytes */
+
+	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
+	0x03, 0x00, /*  __le16 idProduct; device 0x0003 */
+	KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
+
+	0x03,       /*  __u8  iManufacturer; */
+	0x02,       /*  __u8  iProduct; */
+	0x01,       /*  __u8  iSerialNumber; */
+	0x01        /*  __u8  bNumConfigurations; */
+};
+
+/* usb 3.0 root hub device descriptor */
+static const u8 usb3_rh_dev_descriptor[18] = {
+	0x12,       /*  __u8  bLength; */
+	USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
+	0x00, 0x03, /*  __le16 bcdUSB; v3.0 */
+
+	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	    /*  __u8  bDeviceSubClass; */
+	0x03,       /*  __u8  bDeviceProtocol; USB 3.0 hub */
+	0x09,       /*  __u8  bMaxPacketSize0; 2^9 = 512 Bytes */
+
+	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
+	0x03, 0x00, /*  __le16 idProduct; device 0x0003 */
+	KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
+
+	0x03,       /*  __u8  iManufacturer; */
+	0x02,       /*  __u8  iProduct; */
+	0x01,       /*  __u8  iSerialNumber; */
+	0x01        /*  __u8  bNumConfigurations; */
+};
+
+/* usb 2.5 (wireless USB 1.0) root hub device descriptor */
+static const u8 usb25_rh_dev_descriptor[18] = {
+	0x12,       /*  __u8  bLength; */
+	USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
+	0x50, 0x02, /*  __le16 bcdUSB; v2.5 */
+
+	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	    /*  __u8  bDeviceSubClass; */
+	0x00,       /*  __u8  bDeviceProtocol; [ usb 2.0 no TT ] */
+	0xFF,       /*  __u8  bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */
+
+	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
+	0x02, 0x00, /*  __le16 idProduct; device 0x0002 */
+	KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
+
+	0x03,       /*  __u8  iManufacturer; */
+	0x02,       /*  __u8  iProduct; */
+	0x01,       /*  __u8  iSerialNumber; */
+	0x01        /*  __u8  bNumConfigurations; */
+};
+
+/* usb 2.0 root hub device descriptor */
+static const u8 usb2_rh_dev_descriptor[18] = {
+	0x12,       /*  __u8  bLength; */
+	USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
+	0x00, 0x02, /*  __le16 bcdUSB; v2.0 */
+
+	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	    /*  __u8  bDeviceSubClass; */
+	0x00,       /*  __u8  bDeviceProtocol; [ usb 2.0 no TT ] */
+	0x40,       /*  __u8  bMaxPacketSize0; 64 Bytes */
+
+	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
+	0x02, 0x00, /*  __le16 idProduct; device 0x0002 */
+	KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
+
+	0x03,       /*  __u8  iManufacturer; */
+	0x02,       /*  __u8  iProduct; */
+	0x01,       /*  __u8  iSerialNumber; */
+	0x01        /*  __u8  bNumConfigurations; */
+};
+
+/* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
+
+/* usb 1.1 root hub device descriptor */
+static const u8 usb11_rh_dev_descriptor[18] = {
+	0x12,       /*  __u8  bLength; */
+	USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
+	0x10, 0x01, /*  __le16 bcdUSB; v1.1 */
+
+	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	    /*  __u8  bDeviceSubClass; */
+	0x00,       /*  __u8  bDeviceProtocol; [ low/full speeds only ] */
+	0x40,       /*  __u8  bMaxPacketSize0; 64 Bytes */
+
+	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
+	0x01, 0x00, /*  __le16 idProduct; device 0x0001 */
+	KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
+
+	0x03,       /*  __u8  iManufacturer; */
+	0x02,       /*  __u8  iProduct; */
+	0x01,       /*  __u8  iSerialNumber; */
+	0x01        /*  __u8  bNumConfigurations; */
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Configuration descriptors for our root hubs */
+
+static const u8 fs_rh_config_descriptor[] = {
+
+	/* one configuration */
+	0x09,       /*  __u8  bLength; */
+	USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
+	0x19, 0x00, /*  __le16 wTotalLength; */
+	0x01,       /*  __u8  bNumInterfaces; (1) */
+	0x01,       /*  __u8  bConfigurationValue; */
+	0x00,       /*  __u8  iConfiguration; */
+	0xc0,       /*  __u8  bmAttributes;
+				 Bit 7: must be set,
+				     6: Self-powered,
+				     5: Remote wakeup,
+				     4..0: resvd */
+	0x00,       /*  __u8  MaxPower; */
+
+	/* USB 1.1:
+	 * USB 2.0, single TT organization (mandatory):
+	 *	one interface, protocol 0
+	 *
+	 * USB 2.0, multiple TT organization (optional):
+	 *	two interfaces, protocols 1 (like single TT)
+	 *	and 2 (multiple TT mode) ... config is
+	 *	sometimes settable
+	 *	NOT IMPLEMENTED
+	 */
+
+	/* one interface */
+	0x09,       /*  __u8  if_bLength; */
+	USB_DT_INTERFACE,  /* __u8 if_bDescriptorType; Interface */
+	0x00,       /*  __u8  if_bInterfaceNumber; */
+	0x00,       /*  __u8  if_bAlternateSetting; */
+	0x01,       /*  __u8  if_bNumEndpoints; */
+	0x09,       /*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
+	0x00,       /*  __u8  if_bInterfaceSubClass; */
+	0x00,       /*  __u8  if_bInterfaceProtocol; [usb1.1 or single tt] */
+	0x00,       /*  __u8  if_iInterface; */
+
+	/* one endpoint (status change endpoint) */
+	0x07,       /*  __u8  ep_bLength; */
+	USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
+	0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
+	0x03,       /*  __u8  ep_bmAttributes; Interrupt */
+	0x02, 0x00, /*  __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
+	0xff        /*  __u8  ep_bInterval; (255ms -- usb 2.0 spec) */
+};
+
+static const u8 hs_rh_config_descriptor[] = {
+
+	/* one configuration */
+	0x09,       /*  __u8  bLength; */
+	USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
+	0x19, 0x00, /*  __le16 wTotalLength; */
+	0x01,       /*  __u8  bNumInterfaces; (1) */
+	0x01,       /*  __u8  bConfigurationValue; */
+	0x00,       /*  __u8  iConfiguration; */
+	0xc0,       /*  __u8  bmAttributes;
+				 Bit 7: must be set,
+				     6: Self-powered,
+				     5: Remote wakeup,
+				     4..0: resvd */
+	0x00,       /*  __u8  MaxPower; */
+
+	/* USB 1.1:
+	 * USB 2.0, single TT organization (mandatory):
+	 *	one interface, protocol 0
+	 *
+	 * USB 2.0, multiple TT organization (optional):
+	 *	two interfaces, protocols 1 (like single TT)
+	 *	and 2 (multiple TT mode) ... config is
+	 *	sometimes settable
+	 *	NOT IMPLEMENTED
+	 */
+
+	/* one interface */
+	0x09,       /*  __u8  if_bLength; */
+	USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
+	0x00,       /*  __u8  if_bInterfaceNumber; */
+	0x00,       /*  __u8  if_bAlternateSetting; */
+	0x01,       /*  __u8  if_bNumEndpoints; */
+	0x09,       /*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
+	0x00,       /*  __u8  if_bInterfaceSubClass; */
+	0x00,       /*  __u8  if_bInterfaceProtocol; [usb1.1 or single tt] */
+	0x00,       /*  __u8  if_iInterface; */
+
+	/* one endpoint (status change endpoint) */
+	0x07,       /*  __u8  ep_bLength; */
+	USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
+	0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
+	0x03,       /*  __u8  ep_bmAttributes; Interrupt */
+		    /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
+		     * see hub.c:hub_configure() for details. */
+	(USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
+	0x0c        /*  __u8  ep_bInterval; (256ms -- usb 2.0 spec) */
+};
+
+static const u8 ss_rh_config_descriptor[] = {
+	/* one configuration */
+	0x09,       /*  __u8  bLength; */
+	USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
+	0x1f, 0x00, /*  __le16 wTotalLength; */
+	0x01,       /*  __u8  bNumInterfaces; (1) */
+	0x01,       /*  __u8  bConfigurationValue; */
+	0x00,       /*  __u8  iConfiguration; */
+	0xc0,       /*  __u8  bmAttributes;
+				 Bit 7: must be set,
+				     6: Self-powered,
+				     5: Remote wakeup,
+				     4..0: resvd */
+	0x00,       /*  __u8  MaxPower; */
+
+	/* one interface */
+	0x09,       /*  __u8  if_bLength; */
+	USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
+	0x00,       /*  __u8  if_bInterfaceNumber; */
+	0x00,       /*  __u8  if_bAlternateSetting; */
+	0x01,       /*  __u8  if_bNumEndpoints; */
+	0x09,       /*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
+	0x00,       /*  __u8  if_bInterfaceSubClass; */
+	0x00,       /*  __u8  if_bInterfaceProtocol; */
+	0x00,       /*  __u8  if_iInterface; */
+
+	/* one endpoint (status change endpoint) */
+	0x07,       /*  __u8  ep_bLength; */
+	USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
+	0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
+	0x03,       /*  __u8  ep_bmAttributes; Interrupt */
+		    /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
+		     * see hub.c:hub_configure() for details. */
+	(USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
+	0x0c,       /*  __u8  ep_bInterval; (256ms -- usb 2.0 spec) */
+
+	/* one SuperSpeed endpoint companion descriptor */
+	0x06,        /* __u8 ss_bLength */
+	USB_DT_SS_ENDPOINT_COMP, /* __u8 ss_bDescriptorType; SuperSpeed EP */
+		     /* Companion */
+	0x00,        /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
+	0x00,        /* __u8 ss_bmAttributes; 1 packet per service interval */
+	0x02, 0x00   /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
+};
+
+/* authorized_default behaviour:
+ * -1 is authorized for all devices except wireless (old behaviour)
+ * 0 is unauthorized for all devices
+ * 1 is authorized for all devices
+ * 2 is authorized for internal devices
+ */
+#define USB_AUTHORIZE_WIRED	-1
+#define USB_AUTHORIZE_NONE	0
+#define USB_AUTHORIZE_ALL	1
+#define USB_AUTHORIZE_INTERNAL	2
+
+static int authorized_default = USB_AUTHORIZE_WIRED;
+module_param(authorized_default, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(authorized_default,
+		"Default USB device authorization: 0 is not authorized, 1 is "
+		"authorized, 2 is authorized for internal devices, -1 is "
+		"authorized except for wireless USB (default, old behaviour)");
+/*-------------------------------------------------------------------------*/
+
+/**
+ * ascii2desc() - Helper routine for producing UTF-16LE string descriptors
+ * @s: Null-terminated ASCII (actually ISO-8859-1) string
+ * @buf: Buffer for USB string descriptor (header + UTF-16LE)
+ * @len: Length (in bytes; may be odd) of descriptor buffer.
+ *
+ * Return: The number of bytes filled in: 2 + 2*strlen(s) or @len,
+ * whichever is less.
+ *
+ * Note:
+ * USB String descriptors can contain at most 126 characters; input
+ * strings longer than that are truncated.
+ */
+static unsigned
+ascii2desc(char const *s, u8 *buf, unsigned len)
+{
+	unsigned n, t = 2 + 2*strlen(s);
+
+	if (t > 254)
+		t = 254;	/* Longest possible UTF string descriptor */
+	if (len > t)
+		len = t;
+
+	t += USB_DT_STRING << 8;	/* Now t is first 16 bits to store */
+
+	n = len;
+	while (n--) {
+		*buf++ = t;
+		if (!n--)
+			break;
+		*buf++ = t >> 8;
+		t = (unsigned char)*s++;
+	}
+	return len;
+}
+
+/**
+ * rh_string() - provides string descriptors for root hub
+ * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor)
+ * @hcd: the host controller for this root hub
+ * @data: buffer for output packet
+ * @len: length of the provided buffer
+ *
+ * Produces either a manufacturer, product or serial number string for the
+ * virtual root hub device.
+ *
+ * Return: The number of bytes filled in: the length of the descriptor or
+ * of the provided buffer, whichever is less.
+ */
+static unsigned
+rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
+{
+	char buf[100];
+	char const *s;
+	static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
+
+	/* language ids */
+	switch (id) {
+	case 0:
+		/* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
+		/* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */
+		if (len > 4)
+			len = 4;
+		memcpy(data, langids, len);
+		return len;
+	case 1:
+		/* Serial number */
+		s = hcd->self.bus_name;
+		break;
+	case 2:
+		/* Product name */
+		s = hcd->product_desc;
+		break;
+	case 3:
+		/* Manufacturer */
+		snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
+			init_utsname()->release, hcd->driver->description);
+		s = buf;
+		break;
+	default:
+		/* Can't happen; caller guarantees it */
+		return 0;
+	}
+
+	return ascii2desc(s, data, len);
+}
+
+
+/* Root hub control transfers execute synchronously */
+static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
+{
+	struct usb_ctrlrequest *cmd;
+	u16		typeReq, wValue, wIndex, wLength;
+	u8		*ubuf = urb->transfer_buffer;
+	unsigned	len = 0;
+	int		status;
+	u8		patch_wakeup = 0;
+	u8		patch_protocol = 0;
+	u16		tbuf_size;
+	u8		*tbuf = NULL;
+	const u8	*bufp;
+
+	might_sleep();
+
+	spin_lock_irq(&hcd_root_hub_lock);
+	status = usb_hcd_link_urb_to_ep(hcd, urb);
+	spin_unlock_irq(&hcd_root_hub_lock);
+	if (status)
+		return status;
+	urb->hcpriv = hcd;	/* Indicate it's queued */
+
+	cmd = (struct usb_ctrlrequest *) urb->setup_packet;
+	typeReq  = (cmd->bRequestType << 8) | cmd->bRequest;
+	wValue   = le16_to_cpu (cmd->wValue);
+	wIndex   = le16_to_cpu (cmd->wIndex);
+	wLength  = le16_to_cpu (cmd->wLength);
+
+	if (wLength > urb->transfer_buffer_length)
+		goto error;
+
+	/*
+	 * tbuf should be at least as big as the
+	 * USB hub descriptor.
+	 */
+	tbuf_size =  max_t(u16, sizeof(struct usb_hub_descriptor), wLength);
+	tbuf = kzalloc(tbuf_size, GFP_KERNEL);
+	if (!tbuf) {
+		status = -ENOMEM;
+		goto err_alloc;
+	}
+
+	bufp = tbuf;
+
+
+	urb->actual_length = 0;
+	switch (typeReq) {
+
+	/* DEVICE REQUESTS */
+
+	/* The root hub's remote wakeup enable bit is implemented using
+	 * driver model wakeup flags.  If this system supports wakeup
+	 * through USB, userspace may change the default "allow wakeup"
+	 * policy through sysfs or these calls.
+	 *
+	 * Most root hubs support wakeup from downstream devices, for
+	 * runtime power management (disabling USB clocks and reducing
+	 * VBUS power usage).  However, not all of them do so; silicon,
+	 * board, and BIOS bugs here are not uncommon, so these can't
+	 * be treated quite like external hubs.
+	 *
+	 * Likewise, not all root hubs will pass wakeup events upstream,
+	 * to wake up the whole system.  So don't assume root hub and
+	 * controller capabilities are identical.
+	 */
+
+	case DeviceRequest | USB_REQ_GET_STATUS:
+		tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev)
+					<< USB_DEVICE_REMOTE_WAKEUP)
+				| (1 << USB_DEVICE_SELF_POWERED);
+		tbuf[1] = 0;
+		len = 2;
+		break;
+	case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
+		if (wValue == USB_DEVICE_REMOTE_WAKEUP)
+			device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
+		else
+			goto error;
+		break;
+	case DeviceOutRequest | USB_REQ_SET_FEATURE:
+		if (device_can_wakeup(&hcd->self.root_hub->dev)
+				&& wValue == USB_DEVICE_REMOTE_WAKEUP)
+			device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
+		else
+			goto error;
+		break;
+	case DeviceRequest | USB_REQ_GET_CONFIGURATION:
+		tbuf[0] = 1;
+		len = 1;
+		fallthrough;
+	case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
+		break;
+	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+		switch (wValue & 0xff00) {
+		case USB_DT_DEVICE << 8:
+			switch (hcd->speed) {
+			case HCD_USB32:
+			case HCD_USB31:
+				bufp = usb31_rh_dev_descriptor;
+				break;
+			case HCD_USB3:
+				bufp = usb3_rh_dev_descriptor;
+				break;
+			case HCD_USB25:
+				bufp = usb25_rh_dev_descriptor;
+				break;
+			case HCD_USB2:
+				bufp = usb2_rh_dev_descriptor;
+				break;
+			case HCD_USB11:
+				bufp = usb11_rh_dev_descriptor;
+				break;
+			default:
+				goto error;
+			}
+			len = 18;
+			if (hcd->has_tt)
+				patch_protocol = 1;
+			break;
+		case USB_DT_CONFIG << 8:
+			switch (hcd->speed) {
+			case HCD_USB32:
+			case HCD_USB31:
+			case HCD_USB3:
+				bufp = ss_rh_config_descriptor;
+				len = sizeof ss_rh_config_descriptor;
+				break;
+			case HCD_USB25:
+			case HCD_USB2:
+				bufp = hs_rh_config_descriptor;
+				len = sizeof hs_rh_config_descriptor;
+				break;
+			case HCD_USB11:
+				bufp = fs_rh_config_descriptor;
+				len = sizeof fs_rh_config_descriptor;
+				break;
+			default:
+				goto error;
+			}
+			if (device_can_wakeup(&hcd->self.root_hub->dev))
+				patch_wakeup = 1;
+			break;
+		case USB_DT_STRING << 8:
+			if ((wValue & 0xff) < 4)
+				urb->actual_length = rh_string(wValue & 0xff,
+						hcd, ubuf, wLength);
+			else /* unsupported IDs --> "protocol stall" */
+				goto error;
+			break;
+		case USB_DT_BOS << 8:
+			goto nongeneric;
+		default:
+			goto error;
+		}
+		break;
+	case DeviceRequest | USB_REQ_GET_INTERFACE:
+		tbuf[0] = 0;
+		len = 1;
+		fallthrough;
+	case DeviceOutRequest | USB_REQ_SET_INTERFACE:
+		break;
+	case DeviceOutRequest | USB_REQ_SET_ADDRESS:
+		/* wValue == urb->dev->devaddr */
+		dev_dbg (hcd->self.controller, "root hub device address %d\n",
+			wValue);
+		break;
+
+	/* INTERFACE REQUESTS (no defined feature/status flags) */
+
+	/* ENDPOINT REQUESTS */
+
+	case EndpointRequest | USB_REQ_GET_STATUS:
+		/* ENDPOINT_HALT flag */
+		tbuf[0] = 0;
+		tbuf[1] = 0;
+		len = 2;
+		fallthrough;
+	case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
+	case EndpointOutRequest | USB_REQ_SET_FEATURE:
+		dev_dbg (hcd->self.controller, "no endpoint features yet\n");
+		break;
+
+	/* CLASS REQUESTS (and errors) */
+
+	default:
+nongeneric:
+		/* non-generic request */
+		switch (typeReq) {
+		case GetHubStatus:
+			len = 4;
+			break;
+		case GetPortStatus:
+			if (wValue == HUB_PORT_STATUS)
+				len = 4;
+			else
+				/* other port status types return 8 bytes */
+				len = 8;
+			break;
+		case GetHubDescriptor:
+			len = sizeof (struct usb_hub_descriptor);
+			break;
+		case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+			/* len is returned by hub_control */
+			break;
+		}
+		status = hcd->driver->hub_control (hcd,
+			typeReq, wValue, wIndex,
+			tbuf, wLength);
+
+		if (typeReq == GetHubDescriptor)
+			usb_hub_adjust_deviceremovable(hcd->self.root_hub,
+				(struct usb_hub_descriptor *)tbuf);
+		break;
+error:
+		/* "protocol stall" on error */
+		status = -EPIPE;
+	}
+
+	if (status < 0) {
+		len = 0;
+		if (status != -EPIPE) {
+			dev_dbg (hcd->self.controller,
+				"CTRL: TypeReq=0x%x val=0x%x "
+				"idx=0x%x len=%d ==> %d\n",
+				typeReq, wValue, wIndex,
+				wLength, status);
+		}
+	} else if (status > 0) {
+		/* hub_control may return the length of data copied. */
+		len = status;
+		status = 0;
+	}
+	if (len) {
+		if (urb->transfer_buffer_length < len)
+			len = urb->transfer_buffer_length;
+		urb->actual_length = len;
+		/* always USB_DIR_IN, toward host */
+		memcpy (ubuf, bufp, len);
+
+		/* report whether RH hardware supports remote wakeup */
+		if (patch_wakeup &&
+				len > offsetof (struct usb_config_descriptor,
+						bmAttributes))
+			((struct usb_config_descriptor *)ubuf)->bmAttributes
+				|= USB_CONFIG_ATT_WAKEUP;
+
+		/* report whether RH hardware has an integrated TT */
+		if (patch_protocol &&
+				len > offsetof(struct usb_device_descriptor,
+						bDeviceProtocol))
+			((struct usb_device_descriptor *) ubuf)->
+				bDeviceProtocol = USB_HUB_PR_HS_SINGLE_TT;
+	}
+
+	kfree(tbuf);
+ err_alloc:
+
+	/* any errors get returned through the urb completion */
+	spin_lock_irq(&hcd_root_hub_lock);
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+	usb_hcd_giveback_urb(hcd, urb, status);
+	spin_unlock_irq(&hcd_root_hub_lock);
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Root Hub interrupt transfers are polled using a timer if the
+ * driver requests it; otherwise the driver is responsible for
+ * calling usb_hcd_poll_rh_status() when an event occurs.
+ *
+ * Completion handler may not sleep. See usb_hcd_giveback_urb() for details.
+ */
+void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
+{
+	struct urb	*urb;
+	int		length;
+	int		status;
+	unsigned long	flags;
+	char		buffer[6];	/* Any root hubs with > 31 ports? */
+
+	if (unlikely(!hcd->rh_pollable))
+		return;
+	if (!hcd->uses_new_polling && !hcd->status_urb)
+		return;
+
+	length = hcd->driver->hub_status_data(hcd, buffer);
+	if (length > 0) {
+
+		/* try to complete the status urb */
+		spin_lock_irqsave(&hcd_root_hub_lock, flags);
+		urb = hcd->status_urb;
+		if (urb) {
+			clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
+			hcd->status_urb = NULL;
+			if (urb->transfer_buffer_length >= length) {
+				status = 0;
+			} else {
+				status = -EOVERFLOW;
+				length = urb->transfer_buffer_length;
+			}
+			urb->actual_length = length;
+			memcpy(urb->transfer_buffer, buffer, length);
+
+			usb_hcd_unlink_urb_from_ep(hcd, urb);
+			usb_hcd_giveback_urb(hcd, urb, status);
+		} else {
+			length = 0;
+			set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
+		}
+		spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
+	}
+
+	/* The USB 2.0 spec says 256 ms.  This is close enough and won't
+	 * exceed that limit if HZ is 100. The math is more clunky than
+	 * maybe expected, this is to make sure that all timers for USB devices
+	 * fire at the same time to give the CPU a break in between */
+	if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
+			(length == 0 && hcd->status_urb != NULL))
+		mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
+}
+EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
+
+/* timer callback */
+static void rh_timer_func (struct timer_list *t)
+{
+	struct usb_hcd *_hcd = from_timer(_hcd, t, rh_timer);
+
+	usb_hcd_poll_rh_status(_hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
+{
+	int		retval;
+	unsigned long	flags;
+	unsigned	len = 1 + (urb->dev->maxchild / 8);
+
+	spin_lock_irqsave (&hcd_root_hub_lock, flags);
+	if (hcd->status_urb || urb->transfer_buffer_length < len) {
+		dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
+		retval = -EINVAL;
+		goto done;
+	}
+
+	retval = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (retval)
+		goto done;
+
+	hcd->status_urb = urb;
+	urb->hcpriv = hcd;	/* indicate it's queued */
+	if (!hcd->uses_new_polling)
+		mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
+
+	/* If a status change has already occurred, report it ASAP */
+	else if (HCD_POLL_PENDING(hcd))
+		mod_timer(&hcd->rh_timer, jiffies);
+	retval = 0;
+ done:
+	spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
+	return retval;
+}
+
+static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
+{
+	if (usb_endpoint_xfer_int(&urb->ep->desc))
+		return rh_queue_status (hcd, urb);
+	if (usb_endpoint_xfer_control(&urb->ep->desc))
+		return rh_call_control (hcd, urb);
+	return -EINVAL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Unlinks of root-hub control URBs are legal, but they don't do anything
+ * since these URBs always execute synchronously.
+ */
+static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	unsigned long	flags;
+	int		rc;
+
+	spin_lock_irqsave(&hcd_root_hub_lock, flags);
+	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (rc)
+		goto done;
+
+	if (usb_endpoint_num(&urb->ep->desc) == 0) {	/* Control URB */
+		;	/* Do nothing */
+
+	} else {				/* Status URB */
+		if (!hcd->uses_new_polling)
+			del_timer (&hcd->rh_timer);
+		if (urb == hcd->status_urb) {
+			hcd->status_urb = NULL;
+			usb_hcd_unlink_urb_from_ep(hcd, urb);
+			usb_hcd_giveback_urb(hcd, urb, status);
+		}
+	}
+ done:
+	spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
+	return rc;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_bus_init - shared initialization code
+ * @bus: the bus structure being initialized
+ *
+ * This code is used to initialize a usb_bus structure, memory for which is
+ * separately managed.
+ */
+static void usb_bus_init (struct usb_bus *bus)
+{
+	memset (&bus->devmap, 0, sizeof(struct usb_devmap));
+
+	bus->devnum_next = 1;
+
+	bus->root_hub = NULL;
+	bus->busnum = -1;
+	bus->bandwidth_allocated = 0;
+	bus->bandwidth_int_reqs  = 0;
+	bus->bandwidth_isoc_reqs = 0;
+	mutex_init(&bus->devnum_next_mutex);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_register_bus - registers the USB host controller with the usb core
+ * @bus: pointer to the bus to register
+ *
+ * Context: task context, might sleep.
+ *
+ * Assigns a bus number, and links the controller into usbcore data
+ * structures so that it can be seen by scanning the bus list.
+ *
+ * Return: 0 if successful. A negative error code otherwise.
+ */
+static int usb_register_bus(struct usb_bus *bus)
+{
+	int result = -E2BIG;
+	int busnum;
+
+	mutex_lock(&usb_bus_idr_lock);
+	busnum = idr_alloc(&usb_bus_idr, bus, 1, USB_MAXBUS, GFP_KERNEL);
+	if (busnum < 0) {
+		pr_err("%s: failed to get bus number\n", usbcore_name);
+		goto error_find_busnum;
+	}
+	bus->busnum = busnum;
+	mutex_unlock(&usb_bus_idr_lock);
+
+	usb_notify_add_bus(bus);
+
+	dev_info (bus->controller, "new USB bus registered, assigned bus "
+		  "number %d\n", bus->busnum);
+	return 0;
+
+error_find_busnum:
+	mutex_unlock(&usb_bus_idr_lock);
+	return result;
+}
+
+/**
+ * usb_deregister_bus - deregisters the USB host controller
+ * @bus: pointer to the bus to deregister
+ *
+ * Context: task context, might sleep.
+ *
+ * Recycles the bus number, and unlinks the controller from usbcore data
+ * structures so that it won't be seen by scanning the bus list.
+ */
+static void usb_deregister_bus (struct usb_bus *bus)
+{
+	dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
+
+	/*
+	 * NOTE: make sure that all the devices are removed by the
+	 * controller code, as well as having it call this when cleaning
+	 * itself up
+	 */
+	mutex_lock(&usb_bus_idr_lock);
+	idr_remove(&usb_bus_idr, bus->busnum);
+	mutex_unlock(&usb_bus_idr_lock);
+
+	usb_notify_remove_bus(bus);
+}
+
+/**
+ * register_root_hub - called by usb_add_hcd() to register a root hub
+ * @hcd: host controller for this root hub
+ *
+ * This function registers the root hub with the USB subsystem.  It sets up
+ * the device properly in the device tree and then calls usb_new_device()
+ * to register the usb device.  It also assigns the root hub's USB address
+ * (always 1).
+ *
+ * Return: 0 if successful. A negative error code otherwise.
+ */
+static int register_root_hub(struct usb_hcd *hcd)
+{
+	struct device *parent_dev = hcd->self.controller;
+	struct usb_device *usb_dev = hcd->self.root_hub;
+	struct usb_device_descriptor *descr;
+	const int devnum = 1;
+	int retval;
+
+	usb_dev->devnum = devnum;
+	usb_dev->bus->devnum_next = devnum + 1;
+	set_bit (devnum, usb_dev->bus->devmap.devicemap);
+	usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
+
+	mutex_lock(&usb_bus_idr_lock);
+
+	usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
+	descr = usb_get_device_descriptor(usb_dev);
+	if (IS_ERR(descr)) {
+		retval = PTR_ERR(descr);
+		mutex_unlock(&usb_bus_idr_lock);
+		dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
+				dev_name(&usb_dev->dev), retval);
+		return retval;
+	}
+	usb_dev->descriptor = *descr;
+	kfree(descr);
+
+	if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) {
+		retval = usb_get_bos_descriptor(usb_dev);
+		if (!retval) {
+			usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
+		} else if (usb_dev->speed >= USB_SPEED_SUPER) {
+			mutex_unlock(&usb_bus_idr_lock);
+			dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
+					dev_name(&usb_dev->dev), retval);
+			return retval;
+		}
+	}
+
+	retval = usb_new_device (usb_dev);
+	if (retval) {
+		dev_err (parent_dev, "can't register root hub for %s, %d\n",
+				dev_name(&usb_dev->dev), retval);
+	} else {
+		spin_lock_irq (&hcd_root_hub_lock);
+		hcd->rh_registered = 1;
+		spin_unlock_irq (&hcd_root_hub_lock);
+
+		/* Did the HC die before the root hub was registered? */
+		if (HCD_DEAD(hcd))
+			usb_hc_died (hcd);	/* This time clean up */
+	}
+	mutex_unlock(&usb_bus_idr_lock);
+
+	return retval;
+}
+
+/*
+ * usb_hcd_start_port_resume - a root-hub port is sending a resume signal
+ * @bus: the bus which the root hub belongs to
+ * @portnum: the port which is being resumed
+ *
+ * HCDs should call this function when they know that a resume signal is
+ * being sent to a root-hub port.  The root hub will be prevented from
+ * going into autosuspend until usb_hcd_end_port_resume() is called.
+ *
+ * The bus's private lock must be held by the caller.
+ */
+void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum)
+{
+	unsigned bit = 1 << portnum;
+
+	if (!(bus->resuming_ports & bit)) {
+		bus->resuming_ports |= bit;
+		pm_runtime_get_noresume(&bus->root_hub->dev);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume);
+
+/*
+ * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal
+ * @bus: the bus which the root hub belongs to
+ * @portnum: the port which is being resumed
+ *
+ * HCDs should call this function when they know that a resume signal has
+ * stopped being sent to a root-hub port.  The root hub will be allowed to
+ * autosuspend again.
+ *
+ * The bus's private lock must be held by the caller.
+ */
+void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum)
+{
+	unsigned bit = 1 << portnum;
+
+	if (bus->resuming_ports & bit) {
+		bus->resuming_ports &= ~bit;
+		pm_runtime_put_noidle(&bus->root_hub->dev);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume);
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
+ * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
+ * @is_input: true iff the transaction sends data to the host
+ * @isoc: true for isochronous transactions, false for interrupt ones
+ * @bytecount: how many bytes in the transaction.
+ *
+ * Return: Approximate bus time in nanoseconds for a periodic transaction.
+ *
+ * Note:
+ * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
+ * scheduled in software, this function is only used for such scheduling.
+ */
+long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
+{
+	unsigned long	tmp;
+
+	switch (speed) {
+	case USB_SPEED_LOW: 	/* INTR only */
+		if (is_input) {
+			tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
+			return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
+		} else {
+			tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
+			return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
+		}
+	case USB_SPEED_FULL:	/* ISOC or INTR */
+		if (isoc) {
+			tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
+			return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp;
+		} else {
+			tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
+			return 9107L + BW_HOST_DELAY + tmp;
+		}
+	case USB_SPEED_HIGH:	/* ISOC or INTR */
+		/* FIXME adjust for input vs output */
+		if (isoc)
+			tmp = HS_NSECS_ISO (bytecount);
+		else
+			tmp = HS_NSECS (bytecount);
+		return tmp;
+	default:
+		pr_debug ("%s: bogus device speed!\n", usbcore_name);
+		return -1;
+	}
+}
+EXPORT_SYMBOL_GPL(usb_calc_bus_time);
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Generic HC operations.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being submitted
+ *
+ * Host controller drivers should call this routine in their enqueue()
+ * method.  The HCD's private spinlock must be held and interrupts must
+ * be disabled.  The actions carried out here are required for URB
+ * submission, as well as for endpoint shutdown and for usb_kill_urb.
+ *
+ * Return: 0 for no error, otherwise a negative error code (in which case
+ * the enqueue() method must fail).  If no error occurs but enqueue() fails
+ * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
+ * the private spinlock and returning.
+ */
+int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
+{
+	int		rc = 0;
+
+	spin_lock(&hcd_urb_list_lock);
+
+	/* Check that the URB isn't being killed */
+	if (unlikely(atomic_read(&urb->reject))) {
+		rc = -EPERM;
+		goto done;
+	}
+
+	if (unlikely(!urb->ep->enabled)) {
+		rc = -ENOENT;
+		goto done;
+	}
+
+	if (unlikely(!urb->dev->can_submit)) {
+		rc = -EHOSTUNREACH;
+		goto done;
+	}
+
+	/*
+	 * Check the host controller's state and add the URB to the
+	 * endpoint's queue.
+	 */
+	if (HCD_RH_RUNNING(hcd)) {
+		urb->unlinked = 0;
+		list_add_tail(&urb->urb_list, &urb->ep->urb_list);
+	} else {
+		rc = -ESHUTDOWN;
+		goto done;
+	}
+ done:
+	spin_unlock(&hcd_urb_list_lock);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
+
+/**
+ * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being checked for unlinkability
+ * @status: error code to store in @urb if the unlink succeeds
+ *
+ * Host controller drivers should call this routine in their dequeue()
+ * method.  The HCD's private spinlock must be held and interrupts must
+ * be disabled.  The actions carried out here are required for making
+ * sure than an unlink is valid.
+ *
+ * Return: 0 for no error, otherwise a negative error code (in which case
+ * the dequeue() method must fail).  The possible error codes are:
+ *
+ *	-EIDRM: @urb was not submitted or has already completed.
+ *		The completion function may not have been called yet.
+ *
+ *	-EBUSY: @urb has already been unlinked.
+ */
+int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
+		int status)
+{
+	struct list_head	*tmp;
+
+	/* insist the urb is still queued */
+	list_for_each(tmp, &urb->ep->urb_list) {
+		if (tmp == &urb->urb_list)
+			break;
+	}
+	if (tmp != &urb->urb_list)
+		return -EIDRM;
+
+	/* Any status except -EINPROGRESS means something already started to
+	 * unlink this URB from the hardware.  So there's no more work to do.
+	 */
+	if (urb->unlinked)
+		return -EBUSY;
+	urb->unlinked = status;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
+
+/**
+ * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being unlinked
+ *
+ * Host controller drivers should call this routine before calling
+ * usb_hcd_giveback_urb().  The HCD's private spinlock must be held and
+ * interrupts must be disabled.  The actions carried out here are required
+ * for URB completion.
+ */
+void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
+{
+	/* clear all state linking urb to this dev (and hcd) */
+	spin_lock(&hcd_urb_list_lock);
+	list_del_init(&urb->urb_list);
+	spin_unlock(&hcd_urb_list_lock);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
+
+/*
+ * Some usb host controllers can only perform dma using a small SRAM area,
+ * or have restrictions on addressable DRAM.
+ * The usb core itself is however optimized for host controllers that can dma
+ * using regular system memory - like pci devices doing bus mastering.
+ *
+ * To support host controllers with limited dma capabilities we provide dma
+ * bounce buffers. This feature can be enabled by initializing
+ * hcd->localmem_pool using usb_hcd_setup_local_mem().
+ *
+ * The initialized hcd->localmem_pool then tells the usb code to allocate all
+ * data for dma using the genalloc API.
+ *
+ * So, to summarize...
+ *
+ * - We need "local" memory, canonical example being
+ *   a small SRAM on a discrete controller being the
+ *   only memory that the controller can read ...
+ *   (a) "normal" kernel memory is no good, and
+ *   (b) there's not enough to share
+ *
+ * - So we use that, even though the primary requirement
+ *   is that the memory be "local" (hence addressable
+ *   by that device), not "coherent".
+ *
+ */
+
+static int hcd_alloc_coherent(struct usb_bus *bus,
+			      gfp_t mem_flags, dma_addr_t *dma_handle,
+			      void **vaddr_handle, size_t size,
+			      enum dma_data_direction dir)
+{
+	unsigned char *vaddr;
+
+	if (*vaddr_handle == NULL) {
+		WARN_ON_ONCE(1);
+		return -EFAULT;
+	}
+
+	vaddr = hcd_buffer_alloc(bus, size + sizeof(unsigned long),
+				 mem_flags, dma_handle);
+	if (!vaddr)
+		return -ENOMEM;
+
+	/*
+	 * Store the virtual address of the buffer at the end
+	 * of the allocated dma buffer. The size of the buffer
+	 * may be uneven so use unaligned functions instead
+	 * of just rounding up. It makes sense to optimize for
+	 * memory footprint over access speed since the amount
+	 * of memory available for dma may be limited.
+	 */
+	put_unaligned((unsigned long)*vaddr_handle,
+		      (unsigned long *)(vaddr + size));
+
+	if (dir == DMA_TO_DEVICE)
+		memcpy(vaddr, *vaddr_handle, size);
+
+	*vaddr_handle = vaddr;
+	return 0;
+}
+
+static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
+			      void **vaddr_handle, size_t size,
+			      enum dma_data_direction dir)
+{
+	unsigned char *vaddr = *vaddr_handle;
+
+	vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size));
+
+	if (dir == DMA_FROM_DEVICE)
+		memcpy(vaddr, *vaddr_handle, size);
+
+	hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle);
+
+	*vaddr_handle = vaddr;
+	*dma_handle = 0;
+}
+
+void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	if (IS_ENABLED(CONFIG_HAS_DMA) &&
+	    (urb->transfer_flags & URB_SETUP_MAP_SINGLE))
+		dma_unmap_single(hcd->self.sysdev,
+				urb->setup_dma,
+				sizeof(struct usb_ctrlrequest),
+				DMA_TO_DEVICE);
+	else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
+		hcd_free_coherent(urb->dev->bus,
+				&urb->setup_dma,
+				(void **) &urb->setup_packet,
+				sizeof(struct usb_ctrlrequest),
+				DMA_TO_DEVICE);
+
+	/* Make it safe to call this routine more than once */
+	urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma);
+
+static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	if (hcd->driver->unmap_urb_for_dma)
+		hcd->driver->unmap_urb_for_dma(hcd, urb);
+	else
+		usb_hcd_unmap_urb_for_dma(hcd, urb);
+}
+
+void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	enum dma_data_direction dir;
+
+	usb_hcd_unmap_urb_setup_for_dma(hcd, urb);
+
+	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+	if (IS_ENABLED(CONFIG_HAS_DMA) &&
+	    (urb->transfer_flags & URB_DMA_MAP_SG))
+		dma_unmap_sg(hcd->self.sysdev,
+				urb->sg,
+				urb->num_sgs,
+				dir);
+	else if (IS_ENABLED(CONFIG_HAS_DMA) &&
+		 (urb->transfer_flags & URB_DMA_MAP_PAGE))
+		dma_unmap_page(hcd->self.sysdev,
+				urb->transfer_dma,
+				urb->transfer_buffer_length,
+				dir);
+	else if (IS_ENABLED(CONFIG_HAS_DMA) &&
+		 (urb->transfer_flags & URB_DMA_MAP_SINGLE))
+		dma_unmap_single(hcd->self.sysdev,
+				urb->transfer_dma,
+				urb->transfer_buffer_length,
+				dir);
+	else if (urb->transfer_flags & URB_MAP_LOCAL)
+		hcd_free_coherent(urb->dev->bus,
+				&urb->transfer_dma,
+				&urb->transfer_buffer,
+				urb->transfer_buffer_length,
+				dir);
+
+	/* Make it safe to call this routine more than once */
+	urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
+			URB_DMA_MAP_SINGLE | URB_MAP_LOCAL);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma);
+
+static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+			   gfp_t mem_flags)
+{
+	if (hcd->driver->map_urb_for_dma)
+		return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags);
+	else
+		return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+}
+
+int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+			    gfp_t mem_flags)
+{
+	enum dma_data_direction dir;
+	int ret = 0;
+
+	/* Map the URB's buffers for DMA access.
+	 * Lower level HCD code should use *_dma exclusively,
+	 * unless it uses pio or talks to another transport,
+	 * or uses the provided scatter gather list for bulk.
+	 */
+
+	if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+		if (hcd->self.uses_pio_for_control)
+			return ret;
+		if (hcd->localmem_pool) {
+			ret = hcd_alloc_coherent(
+					urb->dev->bus, mem_flags,
+					&urb->setup_dma,
+					(void **)&urb->setup_packet,
+					sizeof(struct usb_ctrlrequest),
+					DMA_TO_DEVICE);
+			if (ret)
+				return ret;
+			urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
+		} else if (hcd_uses_dma(hcd)) {
+			if (object_is_on_stack(urb->setup_packet)) {
+				WARN_ONCE(1, "setup packet is on stack\n");
+				return -EAGAIN;
+			}
+
+			urb->setup_dma = dma_map_single(
+					hcd->self.sysdev,
+					urb->setup_packet,
+					sizeof(struct usb_ctrlrequest),
+					DMA_TO_DEVICE);
+			if (dma_mapping_error(hcd->self.sysdev,
+						urb->setup_dma))
+				return -EAGAIN;
+			urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
+		}
+	}
+
+	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+	if (urb->transfer_buffer_length != 0
+	    && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
+		if (hcd->localmem_pool) {
+			ret = hcd_alloc_coherent(
+					urb->dev->bus, mem_flags,
+					&urb->transfer_dma,
+					&urb->transfer_buffer,
+					urb->transfer_buffer_length,
+					dir);
+			if (ret == 0)
+				urb->transfer_flags |= URB_MAP_LOCAL;
+		} else if (hcd_uses_dma(hcd)) {
+			if (urb->num_sgs) {
+				int n;
+
+				/* We don't support sg for isoc transfers ! */
+				if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
+					WARN_ON(1);
+					return -EINVAL;
+				}
+
+				n = dma_map_sg(
+						hcd->self.sysdev,
+						urb->sg,
+						urb->num_sgs,
+						dir);
+				if (!n)
+					ret = -EAGAIN;
+				else
+					urb->transfer_flags |= URB_DMA_MAP_SG;
+				urb->num_mapped_sgs = n;
+				if (n != urb->num_sgs)
+					urb->transfer_flags |=
+							URB_DMA_SG_COMBINED;
+			} else if (urb->sg) {
+				struct scatterlist *sg = urb->sg;
+				urb->transfer_dma = dma_map_page(
+						hcd->self.sysdev,
+						sg_page(sg),
+						sg->offset,
+						urb->transfer_buffer_length,
+						dir);
+				if (dma_mapping_error(hcd->self.sysdev,
+						urb->transfer_dma))
+					ret = -EAGAIN;
+				else
+					urb->transfer_flags |= URB_DMA_MAP_PAGE;
+			} else if (object_is_on_stack(urb->transfer_buffer)) {
+				WARN_ONCE(1, "transfer buffer is on stack\n");
+				ret = -EAGAIN;
+			} else {
+				urb->transfer_dma = dma_map_single(
+						hcd->self.sysdev,
+						urb->transfer_buffer,
+						urb->transfer_buffer_length,
+						dir);
+				if (dma_mapping_error(hcd->self.sysdev,
+						urb->transfer_dma))
+					ret = -EAGAIN;
+				else
+					urb->transfer_flags |= URB_DMA_MAP_SINGLE;
+			}
+		}
+		if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
+				URB_SETUP_MAP_LOCAL)))
+			usb_hcd_unmap_urb_for_dma(hcd, urb);
+	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma);
+
+/*-------------------------------------------------------------------------*/
+
+/* may be called in any context with a valid urb->dev usecount
+ * caller surrenders "ownership" of urb
+ * expects usb_submit_urb() to have sanity checked and conditioned all
+ * inputs in the urb
+ */
+int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
+{
+	int			status;
+	struct usb_hcd		*hcd = bus_to_hcd(urb->dev->bus);
+
+	/* increment urb's reference count as part of giving it to the HCD
+	 * (which will control it).  HCD guarantees that it either returns
+	 * an error or calls giveback(), but not both.
+	 */
+	usb_get_urb(urb);
+	atomic_inc(&urb->use_count);
+	atomic_inc(&urb->dev->urbnum);
+	usbmon_urb_submit(&hcd->self, urb);
+
+	/* NOTE requirements on root-hub callers (usbfs and the hub
+	 * driver, for now):  URBs' urb->transfer_buffer must be
+	 * valid and usb_buffer_{sync,unmap}() not be needed, since
+	 * they could clobber root hub response data.  Also, control
+	 * URBs must be submitted in process context with interrupts
+	 * enabled.
+	 */
+
+	if (is_root_hub(urb->dev)) {
+		status = rh_urb_enqueue(hcd, urb);
+	} else {
+		status = map_urb_for_dma(hcd, urb, mem_flags);
+		if (likely(status == 0)) {
+			status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
+			if (unlikely(status))
+				unmap_urb_for_dma(hcd, urb);
+		}
+	}
+
+	if (unlikely(status)) {
+		usbmon_urb_submit_error(&hcd->self, urb, status);
+		urb->hcpriv = NULL;
+		INIT_LIST_HEAD(&urb->urb_list);
+		atomic_dec(&urb->use_count);
+		/*
+		 * Order the write of urb->use_count above before the read
+		 * of urb->reject below.  Pairs with the memory barriers in
+		 * usb_kill_urb() and usb_poison_urb().
+		 */
+		smp_mb__after_atomic();
+
+		atomic_dec(&urb->dev->urbnum);
+		if (atomic_read(&urb->reject))
+			wake_up(&usb_kill_urb_queue);
+		usb_put_urb(urb);
+	}
+	return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* this makes the hcd giveback() the urb more quickly, by kicking it
+ * off hardware queues (which may take a while) and returning it as
+ * soon as practical.  we've already set up the urb's return status,
+ * but we can't know if the callback completed already.
+ */
+static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	int		value;
+
+	if (is_root_hub(urb->dev))
+		value = usb_rh_urb_dequeue(hcd, urb, status);
+	else {
+
+		/* The only reason an HCD might fail this call is if
+		 * it has not yet fully queued the urb to begin with.
+		 * Such failures should be harmless. */
+		value = hcd->driver->urb_dequeue(hcd, urb, status);
+	}
+	return value;
+}
+
+/*
+ * called in any context
+ *
+ * caller guarantees urb won't be recycled till both unlink()
+ * and the urb's completion function return
+ */
+int usb_hcd_unlink_urb (struct urb *urb, int status)
+{
+	struct usb_hcd		*hcd;
+	struct usb_device	*udev = urb->dev;
+	int			retval = -EIDRM;
+	unsigned long		flags;
+
+	/* Prevent the device and bus from going away while
+	 * the unlink is carried out.  If they are already gone
+	 * then urb->use_count must be 0, since disconnected
+	 * devices can't have any active URBs.
+	 */
+	spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
+	if (atomic_read(&urb->use_count) > 0) {
+		retval = 0;
+		usb_get_dev(udev);
+	}
+	spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
+	if (retval == 0) {
+		hcd = bus_to_hcd(urb->dev->bus);
+		retval = unlink1(hcd, urb, status);
+		if (retval == 0)
+			retval = -EINPROGRESS;
+		else if (retval != -EIDRM && retval != -EBUSY)
+			dev_dbg(&udev->dev, "hcd_unlink_urb %pK fail %d\n",
+					urb, retval);
+		usb_put_dev(udev);
+	}
+	return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void __usb_hcd_giveback_urb(struct urb *urb)
+{
+	struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
+	struct usb_anchor *anchor = urb->anchor;
+	int status = urb->unlinked;
+
+	urb->hcpriv = NULL;
+	if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
+	    urb->actual_length < urb->transfer_buffer_length &&
+	    !status))
+		status = -EREMOTEIO;
+
+	unmap_urb_for_dma(hcd, urb);
+	usbmon_urb_complete(&hcd->self, urb, status);
+	usb_anchor_suspend_wakeups(anchor);
+	usb_unanchor_urb(urb);
+	if (likely(status == 0))
+		usb_led_activity(USB_LED_EVENT_HOST);
+
+	/* pass ownership to the completion handler */
+	urb->status = status;
+	/*
+	 * This function can be called in task context inside another remote
+	 * coverage collection section, but kcov doesn't support that kind of
+	 * recursion yet. Only collect coverage in softirq context for now.
+	 */
+	kcov_remote_start_usb_softirq((u64)urb->dev->bus->busnum);
+	urb->complete(urb);
+	kcov_remote_stop_softirq();
+
+	usb_anchor_resume_wakeups(anchor);
+	atomic_dec(&urb->use_count);
+	/*
+	 * Order the write of urb->use_count above before the read
+	 * of urb->reject below.  Pairs with the memory barriers in
+	 * usb_kill_urb() and usb_poison_urb().
+	 */
+	smp_mb__after_atomic();
+
+	if (unlikely(atomic_read(&urb->reject)))
+		wake_up(&usb_kill_urb_queue);
+	usb_put_urb(urb);
+}
+
+static void usb_giveback_urb_bh(struct tasklet_struct *t)
+{
+	struct giveback_urb_bh *bh = from_tasklet(bh, t, bh);
+	struct list_head local_list;
+
+	spin_lock_irq(&bh->lock);
+	bh->running = true;
+	list_replace_init(&bh->head, &local_list);
+	spin_unlock_irq(&bh->lock);
+
+	while (!list_empty(&local_list)) {
+		struct urb *urb;
+
+		urb = list_entry(local_list.next, struct urb, urb_list);
+		list_del_init(&urb->urb_list);
+		bh->completing_ep = urb->ep;
+		__usb_hcd_giveback_urb(urb);
+		bh->completing_ep = NULL;
+	}
+
+	/*
+	 * giveback new URBs next time to prevent this function
+	 * from not exiting for a long time.
+	 */
+	spin_lock_irq(&bh->lock);
+	if (!list_empty(&bh->head)) {
+		if (bh->high_prio)
+			tasklet_hi_schedule(&bh->bh);
+		else
+			tasklet_schedule(&bh->bh);
+	}
+	bh->running = false;
+	spin_unlock_irq(&bh->lock);
+}
+
+/**
+ * usb_hcd_giveback_urb - return URB from HCD to device driver
+ * @hcd: host controller returning the URB
+ * @urb: urb being returned to the USB device driver.
+ * @status: completion status code for the URB.
+ *
+ * Context: atomic. The completion callback is invoked in caller's context.
+ * For HCDs with HCD_BH flag set, the completion callback is invoked in tasklet
+ * context (except for URBs submitted to the root hub which always complete in
+ * caller's context).
+ *
+ * This hands the URB from HCD to its USB device driver, using its
+ * completion function.  The HCD has freed all per-urb resources
+ * (and is done using urb->hcpriv).  It also released all HCD locks;
+ * the device driver won't cause problems if it frees, modifies,
+ * or resubmits this URB.
+ *
+ * If @urb was unlinked, the value of @status will be overridden by
+ * @urb->unlinked.  Erroneous short transfers are detected in case
+ * the HCD hasn't checked for them.
+ */
+void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct giveback_urb_bh *bh;
+	bool running;
+
+	/* pass status to tasklet via unlinked */
+	if (likely(!urb->unlinked))
+		urb->unlinked = status;
+
+	if (!hcd_giveback_urb_in_bh(hcd) && !is_root_hub(urb->dev)) {
+		__usb_hcd_giveback_urb(urb);
+		return;
+	}
+
+	if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe))
+		bh = &hcd->high_prio_bh;
+	else
+		bh = &hcd->low_prio_bh;
+
+	spin_lock(&bh->lock);
+	list_add_tail(&urb->urb_list, &bh->head);
+	running = bh->running;
+	spin_unlock(&bh->lock);
+
+	if (running)
+		;
+	else if (bh->high_prio)
+		tasklet_hi_schedule(&bh->bh);
+	else
+		tasklet_schedule(&bh->bh);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
+
+/*-------------------------------------------------------------------------*/
+
+/* Cancel all URBs pending on this endpoint and wait for the endpoint's
+ * queue to drain completely.  The caller must first insure that no more
+ * URBs can be submitted for this endpoint.
+ */
+void usb_hcd_flush_endpoint(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	struct usb_hcd		*hcd;
+	struct urb		*urb;
+
+	if (!ep)
+		return;
+	might_sleep();
+	hcd = bus_to_hcd(udev->bus);
+
+	/* No more submits can occur */
+	spin_lock_irq(&hcd_urb_list_lock);
+rescan:
+	list_for_each_entry_reverse(urb, &ep->urb_list, urb_list) {
+		int	is_in;
+
+		if (urb->unlinked)
+			continue;
+		usb_get_urb (urb);
+		is_in = usb_urb_dir_in(urb);
+		spin_unlock(&hcd_urb_list_lock);
+
+		/* kick hcd */
+		unlink1(hcd, urb, -ESHUTDOWN);
+		dev_dbg (hcd->self.controller,
+			"shutdown urb %pK ep%d%s-%s\n",
+			urb, usb_endpoint_num(&ep->desc),
+			is_in ? "in" : "out",
+			usb_ep_type_string(usb_endpoint_type(&ep->desc)));
+		usb_put_urb (urb);
+
+		/* list contents may have changed */
+		spin_lock(&hcd_urb_list_lock);
+		goto rescan;
+	}
+	spin_unlock_irq(&hcd_urb_list_lock);
+
+	/* Wait until the endpoint queue is completely empty */
+	while (!list_empty (&ep->urb_list)) {
+		spin_lock_irq(&hcd_urb_list_lock);
+
+		/* The list may have changed while we acquired the spinlock */
+		urb = NULL;
+		if (!list_empty (&ep->urb_list)) {
+			urb = list_entry (ep->urb_list.prev, struct urb,
+					urb_list);
+			usb_get_urb (urb);
+		}
+		spin_unlock_irq(&hcd_urb_list_lock);
+
+		if (urb) {
+			usb_kill_urb (urb);
+			usb_put_urb (urb);
+		}
+	}
+}
+
+/**
+ * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds
+ *				the bus bandwidth
+ * @udev: target &usb_device
+ * @new_config: new configuration to install
+ * @cur_alt: the current alternate interface setting
+ * @new_alt: alternate interface setting that is being installed
+ *
+ * To change configurations, pass in the new configuration in new_config,
+ * and pass NULL for cur_alt and new_alt.
+ *
+ * To reset a device's configuration (put the device in the ADDRESSED state),
+ * pass in NULL for new_config, cur_alt, and new_alt.
+ *
+ * To change alternate interface settings, pass in NULL for new_config,
+ * pass in the current alternate interface setting in cur_alt,
+ * and pass in the new alternate interface setting in new_alt.
+ *
+ * Return: An error if the requested bandwidth change exceeds the
+ * bus bandwidth or host controller internal resources.
+ */
+int usb_hcd_alloc_bandwidth(struct usb_device *udev,
+		struct usb_host_config *new_config,
+		struct usb_host_interface *cur_alt,
+		struct usb_host_interface *new_alt)
+{
+	int num_intfs, i, j;
+	struct usb_host_interface *alt = NULL;
+	int ret = 0;
+	struct usb_hcd *hcd;
+	struct usb_host_endpoint *ep;
+
+	hcd = bus_to_hcd(udev->bus);
+	if (!hcd->driver->check_bandwidth)
+		return 0;
+
+	/* Configuration is being removed - set configuration 0 */
+	if (!new_config && !cur_alt) {
+		for (i = 1; i < 16; ++i) {
+			ep = udev->ep_out[i];
+			if (ep)
+				hcd->driver->drop_endpoint(hcd, udev, ep);
+			ep = udev->ep_in[i];
+			if (ep)
+				hcd->driver->drop_endpoint(hcd, udev, ep);
+		}
+		hcd->driver->check_bandwidth(hcd, udev);
+		return 0;
+	}
+	/* Check if the HCD says there's enough bandwidth.  Enable all endpoints
+	 * each interface's alt setting 0 and ask the HCD to check the bandwidth
+	 * of the bus.  There will always be bandwidth for endpoint 0, so it's
+	 * ok to exclude it.
+	 */
+	if (new_config) {
+		num_intfs = new_config->desc.bNumInterfaces;
+		/* Remove endpoints (except endpoint 0, which is always on the
+		 * schedule) from the old config from the schedule
+		 */
+		for (i = 1; i < 16; ++i) {
+			ep = udev->ep_out[i];
+			if (ep) {
+				ret = hcd->driver->drop_endpoint(hcd, udev, ep);
+				if (ret < 0)
+					goto reset;
+			}
+			ep = udev->ep_in[i];
+			if (ep) {
+				ret = hcd->driver->drop_endpoint(hcd, udev, ep);
+				if (ret < 0)
+					goto reset;
+			}
+		}
+		for (i = 0; i < num_intfs; ++i) {
+			struct usb_host_interface *first_alt;
+			int iface_num;
+
+			first_alt = &new_config->intf_cache[i]->altsetting[0];
+			iface_num = first_alt->desc.bInterfaceNumber;
+			/* Set up endpoints for alternate interface setting 0 */
+			alt = usb_find_alt_setting(new_config, iface_num, 0);
+			if (!alt)
+				/* No alt setting 0? Pick the first setting. */
+				alt = first_alt;
+
+			for (j = 0; j < alt->desc.bNumEndpoints; j++) {
+				ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
+				if (ret < 0)
+					goto reset;
+			}
+		}
+	}
+	if (cur_alt && new_alt) {
+		struct usb_interface *iface = usb_ifnum_to_if(udev,
+				cur_alt->desc.bInterfaceNumber);
+
+		if (!iface)
+			return -EINVAL;
+		if (iface->resetting_device) {
+			/*
+			 * The USB core just reset the device, so the xHCI host
+			 * and the device will think alt setting 0 is installed.
+			 * However, the USB core will pass in the alternate
+			 * setting installed before the reset as cur_alt.  Dig
+			 * out the alternate setting 0 structure, or the first
+			 * alternate setting if a broken device doesn't have alt
+			 * setting 0.
+			 */
+			cur_alt = usb_altnum_to_altsetting(iface, 0);
+			if (!cur_alt)
+				cur_alt = &iface->altsetting[0];
+		}
+
+		/* Drop all the endpoints in the current alt setting */
+		for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
+			ret = hcd->driver->drop_endpoint(hcd, udev,
+					&cur_alt->endpoint[i]);
+			if (ret < 0)
+				goto reset;
+		}
+		/* Add all the endpoints in the new alt setting */
+		for (i = 0; i < new_alt->desc.bNumEndpoints; i++) {
+			ret = hcd->driver->add_endpoint(hcd, udev,
+					&new_alt->endpoint[i]);
+			if (ret < 0)
+				goto reset;
+		}
+	}
+	ret = hcd->driver->check_bandwidth(hcd, udev);
+reset:
+	if (ret < 0)
+		hcd->driver->reset_bandwidth(hcd, udev);
+	return ret;
+}
+
+/* Disables the endpoint: synchronizes with the hcd to make sure all
+ * endpoint state is gone from hardware.  usb_hcd_flush_endpoint() must
+ * have been called previously.  Use for set_configuration, set_interface,
+ * driver removal, physical disconnect.
+ *
+ * example:  a qh stored in ep->hcpriv, holding state related to endpoint
+ * type, maxpacket size, toggle, halt status, and scheduling.
+ */
+void usb_hcd_disable_endpoint(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	struct usb_hcd		*hcd;
+
+	might_sleep();
+	hcd = bus_to_hcd(udev->bus);
+	if (hcd->driver->endpoint_disable)
+		hcd->driver->endpoint_disable(hcd, ep);
+}
+
+/**
+ * usb_hcd_reset_endpoint - reset host endpoint state
+ * @udev: USB device.
+ * @ep:   the endpoint to reset.
+ *
+ * Resets any host endpoint state such as the toggle bit, sequence
+ * number and current window.
+ */
+void usb_hcd_reset_endpoint(struct usb_device *udev,
+			    struct usb_host_endpoint *ep)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	if (hcd->driver->endpoint_reset)
+		hcd->driver->endpoint_reset(hcd, ep);
+	else {
+		int epnum = usb_endpoint_num(&ep->desc);
+		int is_out = usb_endpoint_dir_out(&ep->desc);
+		int is_control = usb_endpoint_xfer_control(&ep->desc);
+
+		usb_settoggle(udev, epnum, is_out, 0);
+		if (is_control)
+			usb_settoggle(udev, epnum, !is_out, 0);
+	}
+}
+
+/**
+ * usb_alloc_streams - allocate bulk endpoint stream IDs.
+ * @interface:		alternate setting that includes all endpoints.
+ * @eps:		array of endpoints that need streams.
+ * @num_eps:		number of endpoints in the array.
+ * @num_streams:	number of streams to allocate.
+ * @mem_flags:		flags hcd should use to allocate memory.
+ *
+ * Sets up a group of bulk endpoints to have @num_streams stream IDs available.
+ * Drivers may queue multiple transfers to different stream IDs, which may
+ * complete in a different order than they were queued.
+ *
+ * Return: On success, the number of allocated streams. On failure, a negative
+ * error code.
+ */
+int usb_alloc_streams(struct usb_interface *interface,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		unsigned int num_streams, gfp_t mem_flags)
+{
+	struct usb_hcd *hcd;
+	struct usb_device *dev;
+	int i, ret;
+
+	dev = interface_to_usbdev(interface);
+	hcd = bus_to_hcd(dev->bus);
+	if (!hcd->driver->alloc_streams || !hcd->driver->free_streams)
+		return -EINVAL;
+	if (dev->speed < USB_SPEED_SUPER)
+		return -EINVAL;
+	if (dev->state < USB_STATE_CONFIGURED)
+		return -ENODEV;
+
+	for (i = 0; i < num_eps; i++) {
+		/* Streams only apply to bulk endpoints. */
+		if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
+			return -EINVAL;
+		/* Re-alloc is not allowed */
+		if (eps[i]->streams)
+			return -EINVAL;
+	}
+
+	ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
+			num_streams, mem_flags);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < num_eps; i++)
+		eps[i]->streams = ret;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_alloc_streams);
+
+/**
+ * usb_free_streams - free bulk endpoint stream IDs.
+ * @interface:	alternate setting that includes all endpoints.
+ * @eps:	array of endpoints to remove streams from.
+ * @num_eps:	number of endpoints in the array.
+ * @mem_flags:	flags hcd should use to allocate memory.
+ *
+ * Reverts a group of bulk endpoints back to not using stream IDs.
+ * Can fail if we are given bad arguments, or HCD is broken.
+ *
+ * Return: 0 on success. On failure, a negative error code.
+ */
+int usb_free_streams(struct usb_interface *interface,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		gfp_t mem_flags)
+{
+	struct usb_hcd *hcd;
+	struct usb_device *dev;
+	int i, ret;
+
+	dev = interface_to_usbdev(interface);
+	hcd = bus_to_hcd(dev->bus);
+	if (dev->speed < USB_SPEED_SUPER)
+		return -EINVAL;
+
+	/* Double-free is not allowed */
+	for (i = 0; i < num_eps; i++)
+		if (!eps[i] || !eps[i]->streams)
+			return -EINVAL;
+
+	ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < num_eps; i++)
+		eps[i]->streams = 0;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_free_streams);
+
+/* Protect against drivers that try to unlink URBs after the device
+ * is gone, by waiting until all unlinks for @udev are finished.
+ * Since we don't currently track URBs by device, simply wait until
+ * nothing is running in the locked region of usb_hcd_unlink_urb().
+ */
+void usb_hcd_synchronize_unlinks(struct usb_device *udev)
+{
+	spin_lock_irq(&hcd_urb_unlink_lock);
+	spin_unlock_irq(&hcd_urb_unlink_lock);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* called in any context */
+int usb_hcd_get_frame_number (struct usb_device *udev)
+{
+	struct usb_hcd	*hcd = bus_to_hcd(udev->bus);
+
+	if (!HCD_RH_RUNNING(hcd))
+		return -ESHUTDOWN;
+	return hcd->driver->get_frame_number (hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+#ifdef CONFIG_USB_HCD_TEST_MODE
+
+static void usb_ehset_completion(struct urb *urb)
+{
+	struct completion  *done = urb->context;
+
+	complete(done);
+}
+/*
+ * Allocate and initialize a control URB. This request will be used by the
+ * EHSET SINGLE_STEP_SET_FEATURE test in which the DATA and STATUS stages
+ * of the GetDescriptor request are sent 15 seconds after the SETUP stage.
+ * Return NULL if failed.
+ */
+static struct urb *request_single_step_set_feature_urb(
+	struct usb_device	*udev,
+	void			*dr,
+	void			*buf,
+	struct completion	*done)
+{
+	struct urb *urb;
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return NULL;
+
+	urb->pipe = usb_rcvctrlpipe(udev, 0);
+
+	urb->ep = &udev->ep0;
+	urb->dev = udev;
+	urb->setup_packet = (void *)dr;
+	urb->transfer_buffer = buf;
+	urb->transfer_buffer_length = USB_DT_DEVICE_SIZE;
+	urb->complete = usb_ehset_completion;
+	urb->status = -EINPROGRESS;
+	urb->actual_length = 0;
+	urb->transfer_flags = URB_DIR_IN;
+	usb_get_urb(urb);
+	atomic_inc(&urb->use_count);
+	atomic_inc(&urb->dev->urbnum);
+	if (map_urb_for_dma(hcd, urb, GFP_KERNEL)) {
+		usb_put_urb(urb);
+		usb_free_urb(urb);
+		return NULL;
+	}
+
+	urb->context = done;
+	return urb;
+}
+
+int ehset_single_step_set_feature(struct usb_hcd *hcd, int port)
+{
+	int retval = -ENOMEM;
+	struct usb_ctrlrequest *dr;
+	struct urb *urb;
+	struct usb_device *udev;
+	struct usb_device_descriptor *buf;
+	DECLARE_COMPLETION_ONSTACK(done);
+
+	/* Obtain udev of the rhub's child port */
+	udev = usb_hub_find_child(hcd->self.root_hub, port);
+	if (!udev) {
+		dev_err(hcd->self.controller, "No device attached to the RootHub\n");
+		return -ENODEV;
+	}
+	buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+	if (!dr) {
+		kfree(buf);
+		return -ENOMEM;
+	}
+
+	/* Fill Setup packet for GetDescriptor */
+	dr->bRequestType = USB_DIR_IN;
+	dr->bRequest = USB_REQ_GET_DESCRIPTOR;
+	dr->wValue = cpu_to_le16(USB_DT_DEVICE << 8);
+	dr->wIndex = 0;
+	dr->wLength = cpu_to_le16(USB_DT_DEVICE_SIZE);
+	urb = request_single_step_set_feature_urb(udev, dr, buf, &done);
+	if (!urb)
+		goto cleanup;
+
+	/* Submit just the SETUP stage */
+	retval = hcd->driver->submit_single_step_set_feature(hcd, urb, 1);
+	if (retval)
+		goto out1;
+	if (!wait_for_completion_timeout(&done, msecs_to_jiffies(2000))) {
+		usb_kill_urb(urb);
+		retval = -ETIMEDOUT;
+		dev_err(hcd->self.controller,
+			"%s SETUP stage timed out on ep0\n", __func__);
+		goto out1;
+	}
+	msleep(15 * 1000);
+
+	/* Complete remaining DATA and STATUS stages using the same URB */
+	urb->status = -EINPROGRESS;
+	usb_get_urb(urb);
+	atomic_inc(&urb->use_count);
+	atomic_inc(&urb->dev->urbnum);
+	retval = hcd->driver->submit_single_step_set_feature(hcd, urb, 0);
+	if (!retval && !wait_for_completion_timeout(&done,
+						msecs_to_jiffies(2000))) {
+		usb_kill_urb(urb);
+		retval = -ETIMEDOUT;
+		dev_err(hcd->self.controller,
+			"%s IN stage timed out on ep0\n", __func__);
+	}
+out1:
+	usb_free_urb(urb);
+cleanup:
+	kfree(dr);
+	kfree(buf);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(ehset_single_step_set_feature);
+#endif /* CONFIG_USB_HCD_TEST_MODE */
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_PM
+
+int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
+{
+	struct usb_hcd	*hcd = bus_to_hcd(rhdev->bus);
+	int		status;
+	int		old_state = hcd->state;
+
+	dev_dbg(&rhdev->dev, "bus %ssuspend, wakeup %d\n",
+			(PMSG_IS_AUTO(msg) ? "auto-" : ""),
+			rhdev->do_remote_wakeup);
+	if (HCD_DEAD(hcd)) {
+		dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
+		return 0;
+	}
+
+	if (!hcd->driver->bus_suspend) {
+		status = -ENOENT;
+	} else {
+		clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+		hcd->state = HC_STATE_QUIESCING;
+		status = hcd->driver->bus_suspend(hcd);
+	}
+	if (status == 0) {
+		usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
+		hcd->state = HC_STATE_SUSPENDED;
+
+		if (!PMSG_IS_AUTO(msg))
+			usb_phy_roothub_suspend(hcd->self.sysdev,
+						hcd->phy_roothub);
+
+		/* Did we race with a root-hub wakeup event? */
+		if (rhdev->do_remote_wakeup) {
+			char	buffer[6];
+
+			status = hcd->driver->hub_status_data(hcd, buffer);
+			if (status != 0) {
+				dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
+				hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
+				status = -EBUSY;
+			}
+		}
+	} else {
+		spin_lock_irq(&hcd_root_hub_lock);
+		if (!HCD_DEAD(hcd)) {
+			set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+			hcd->state = old_state;
+		}
+		spin_unlock_irq(&hcd_root_hub_lock);
+		dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
+				"suspend", status);
+	}
+	return status;
+}
+
+int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
+{
+	struct usb_hcd	*hcd = bus_to_hcd(rhdev->bus);
+	int		status;
+	int		old_state = hcd->state;
+
+	dev_dbg(&rhdev->dev, "usb %sresume\n",
+			(PMSG_IS_AUTO(msg) ? "auto-" : ""));
+	if (HCD_DEAD(hcd)) {
+		dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
+		return 0;
+	}
+
+	if (!PMSG_IS_AUTO(msg)) {
+		status = usb_phy_roothub_resume(hcd->self.sysdev,
+						hcd->phy_roothub);
+		if (status)
+			return status;
+	}
+
+	if (!hcd->driver->bus_resume)
+		return -ENOENT;
+	if (HCD_RH_RUNNING(hcd))
+		return 0;
+
+	hcd->state = HC_STATE_RESUMING;
+	status = hcd->driver->bus_resume(hcd);
+	clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
+	if (status == 0)
+		status = usb_phy_roothub_calibrate(hcd->phy_roothub);
+
+	if (status == 0) {
+		struct usb_device *udev;
+		int port1;
+
+		spin_lock_irq(&hcd_root_hub_lock);
+		if (!HCD_DEAD(hcd)) {
+			usb_set_device_state(rhdev, rhdev->actconfig
+					? USB_STATE_CONFIGURED
+					: USB_STATE_ADDRESS);
+			set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+			hcd->state = HC_STATE_RUNNING;
+		}
+		spin_unlock_irq(&hcd_root_hub_lock);
+
+		/*
+		 * Check whether any of the enabled ports on the root hub are
+		 * unsuspended.  If they are then a TRSMRCY delay is needed
+		 * (this is what the USB-2 spec calls a "global resume").
+		 * Otherwise we can skip the delay.
+		 */
+		usb_hub_for_each_child(rhdev, port1, udev) {
+			if (udev->state != USB_STATE_NOTATTACHED &&
+					!udev->port_is_suspended) {
+				usleep_range(10000, 11000);	/* TRSMRCY */
+				break;
+			}
+		}
+	} else {
+		hcd->state = old_state;
+		usb_phy_roothub_suspend(hcd->self.sysdev, hcd->phy_roothub);
+		dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
+				"resume", status);
+		if (status != -ESHUTDOWN)
+			usb_hc_died(hcd);
+	}
+	return status;
+}
+
+/* Workqueue routine for root-hub remote wakeup */
+static void hcd_resume_work(struct work_struct *work)
+{
+	struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
+	struct usb_device *udev = hcd->self.root_hub;
+
+	usb_remote_wakeup(udev);
+}
+
+/**
+ * usb_hcd_resume_root_hub - called by HCD to resume its root hub
+ * @hcd: host controller for this root hub
+ *
+ * The USB host controller calls this function when its root hub is
+ * suspended (with the remote wakeup feature enabled) and a remote
+ * wakeup request is received.  The routine submits a workqueue request
+ * to resume the root hub (that is, manage its downstream ports again).
+ */
+void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave (&hcd_root_hub_lock, flags);
+	if (hcd->rh_registered) {
+		pm_wakeup_event(&hcd->self.root_hub->dev, 0);
+		set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
+		queue_work(pm_wq, &hcd->wakeup_work);
+	}
+	spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
+
+#endif	/* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_USB_OTG
+
+/**
+ * usb_bus_start_enum - start immediate enumeration (for OTG)
+ * @bus: the bus (must use hcd framework)
+ * @port_num: 1-based number of port; usually bus->otg_port
+ * Context: atomic
+ *
+ * Starts enumeration, with an immediate reset followed later by
+ * hub_wq identifying and possibly configuring the device.
+ * This is needed by OTG controller drivers, where it helps meet
+ * HNP protocol timing requirements for starting a port reset.
+ *
+ * Return: 0 if successful.
+ */
+int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
+{
+	struct usb_hcd		*hcd;
+	int			status = -EOPNOTSUPP;
+
+	/* NOTE: since HNP can't start by grabbing the bus's address0_sem,
+	 * boards with root hubs hooked up to internal devices (instead of
+	 * just the OTG port) may need more attention to resetting...
+	 */
+	hcd = bus_to_hcd(bus);
+	if (port_num && hcd->driver->start_port_reset)
+		status = hcd->driver->start_port_reset(hcd, port_num);
+
+	/* allocate hub_wq shortly after (first) root port reset finishes;
+	 * it may issue others, until at least 50 msecs have passed.
+	 */
+	if (status == 0)
+		mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
+	return status;
+}
+EXPORT_SYMBOL_GPL(usb_bus_start_enum);
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_hcd_irq - hook IRQs to HCD framework (bus glue)
+ * @irq: the IRQ being raised
+ * @__hcd: pointer to the HCD whose IRQ is being signaled
+ *
+ * If the controller isn't HALTed, calls the driver's irq handler.
+ * Checks whether the controller is now dead.
+ *
+ * Return: %IRQ_HANDLED if the IRQ was handled. %IRQ_NONE otherwise.
+ */
+irqreturn_t usb_hcd_irq (int irq, void *__hcd)
+{
+	struct usb_hcd		*hcd = __hcd;
+	irqreturn_t		rc;
+
+	if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
+		rc = IRQ_NONE;
+	else if (hcd->driver->irq(hcd) == IRQ_NONE)
+		rc = IRQ_NONE;
+	else
+		rc = IRQ_HANDLED;
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_irq);
+
+/*-------------------------------------------------------------------------*/
+
+/* Workqueue routine for when the root-hub has died. */
+static void hcd_died_work(struct work_struct *work)
+{
+	struct usb_hcd *hcd = container_of(work, struct usb_hcd, died_work);
+	static char *env[] = {
+		"ERROR=DEAD",
+		NULL
+	};
+
+	/* Notify user space that the host controller has died */
+	kobject_uevent_env(&hcd->self.root_hub->dev.kobj, KOBJ_OFFLINE, env);
+}
+
+/**
+ * usb_hc_died - report abnormal shutdown of a host controller (bus glue)
+ * @hcd: pointer to the HCD representing the controller
+ *
+ * This is called by bus glue to report a USB host controller that died
+ * while operations may still have been pending.  It's called automatically
+ * by the PCI glue, so only glue for non-PCI busses should need to call it.
+ *
+ * Only call this function with the primary HCD.
+ */
+void usb_hc_died (struct usb_hcd *hcd)
+{
+	unsigned long flags;
+
+	dev_err (hcd->self.controller, "HC died; cleaning up\n");
+
+	spin_lock_irqsave (&hcd_root_hub_lock, flags);
+	clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+	set_bit(HCD_FLAG_DEAD, &hcd->flags);
+	if (hcd->rh_registered) {
+		clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+		/* make hub_wq clean up old urbs and devices */
+		usb_set_device_state (hcd->self.root_hub,
+				USB_STATE_NOTATTACHED);
+		usb_kick_hub_wq(hcd->self.root_hub);
+	}
+	if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
+		hcd = hcd->shared_hcd;
+		clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+		set_bit(HCD_FLAG_DEAD, &hcd->flags);
+		if (hcd->rh_registered) {
+			clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+			/* make hub_wq clean up old urbs and devices */
+			usb_set_device_state(hcd->self.root_hub,
+					USB_STATE_NOTATTACHED);
+			usb_kick_hub_wq(hcd->self.root_hub);
+		}
+	}
+
+	/* Handle the case where this function gets called with a shared HCD */
+	if (usb_hcd_is_primary_hcd(hcd))
+		schedule_work(&hcd->died_work);
+	else
+		schedule_work(&hcd->primary_hcd->died_work);
+
+	spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
+	/* Make sure that the other roothub is also deallocated. */
+}
+EXPORT_SYMBOL_GPL (usb_hc_died);
+
+/*-------------------------------------------------------------------------*/
+
+static void init_giveback_urb_bh(struct giveback_urb_bh *bh)
+{
+
+	spin_lock_init(&bh->lock);
+	INIT_LIST_HEAD(&bh->head);
+	tasklet_setup(&bh->bh, usb_giveback_urb_bh);
+}
+
+struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
+		struct device *sysdev, struct device *dev, const char *bus_name,
+		struct usb_hcd *primary_hcd)
+{
+	struct usb_hcd *hcd;
+
+	hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
+	if (!hcd)
+		return NULL;
+	if (primary_hcd == NULL) {
+		hcd->address0_mutex = kmalloc(sizeof(*hcd->address0_mutex),
+				GFP_KERNEL);
+		if (!hcd->address0_mutex) {
+			kfree(hcd);
+			dev_dbg(dev, "hcd address0 mutex alloc failed\n");
+			return NULL;
+		}
+		mutex_init(hcd->address0_mutex);
+		hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
+				GFP_KERNEL);
+		if (!hcd->bandwidth_mutex) {
+			kfree(hcd->address0_mutex);
+			kfree(hcd);
+			dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
+			return NULL;
+		}
+		mutex_init(hcd->bandwidth_mutex);
+		dev_set_drvdata(dev, hcd);
+	} else {
+		mutex_lock(&usb_port_peer_mutex);
+		hcd->address0_mutex = primary_hcd->address0_mutex;
+		hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex;
+		hcd->primary_hcd = primary_hcd;
+		primary_hcd->primary_hcd = primary_hcd;
+		hcd->shared_hcd = primary_hcd;
+		primary_hcd->shared_hcd = hcd;
+		mutex_unlock(&usb_port_peer_mutex);
+	}
+
+	kref_init(&hcd->kref);
+
+	usb_bus_init(&hcd->self);
+	hcd->self.controller = dev;
+	hcd->self.sysdev = sysdev;
+	hcd->self.bus_name = bus_name;
+
+	timer_setup(&hcd->rh_timer, rh_timer_func, 0);
+#ifdef CONFIG_PM
+	INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
+#endif
+
+	INIT_WORK(&hcd->died_work, hcd_died_work);
+
+	hcd->driver = driver;
+	hcd->speed = driver->flags & HCD_MASK;
+	hcd->product_desc = (driver->product_desc) ? driver->product_desc :
+			"USB Host Controller";
+	return hcd;
+}
+EXPORT_SYMBOL_GPL(__usb_create_hcd);
+
+/**
+ * usb_create_shared_hcd - create and initialize an HCD structure
+ * @driver: HC driver that will use this hcd
+ * @dev: device for this HC, stored in hcd->self.controller
+ * @bus_name: value to store in hcd->self.bus_name
+ * @primary_hcd: a pointer to the usb_hcd structure that is sharing the
+ *              PCI device.  Only allocate certain resources for the primary HCD
+ *
+ * Context: task context, might sleep.
+ *
+ * Allocate a struct usb_hcd, with extra space at the end for the
+ * HC driver's private data.  Initialize the generic members of the
+ * hcd structure.
+ *
+ * Return: On success, a pointer to the created and initialized HCD structure.
+ * On failure (e.g. if memory is unavailable), %NULL.
+ */
+struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
+		struct device *dev, const char *bus_name,
+		struct usb_hcd *primary_hcd)
+{
+	return __usb_create_hcd(driver, dev, dev, bus_name, primary_hcd);
+}
+EXPORT_SYMBOL_GPL(usb_create_shared_hcd);
+
+/**
+ * usb_create_hcd - create and initialize an HCD structure
+ * @driver: HC driver that will use this hcd
+ * @dev: device for this HC, stored in hcd->self.controller
+ * @bus_name: value to store in hcd->self.bus_name
+ *
+ * Context: task context, might sleep.
+ *
+ * Allocate a struct usb_hcd, with extra space at the end for the
+ * HC driver's private data.  Initialize the generic members of the
+ * hcd structure.
+ *
+ * Return: On success, a pointer to the created and initialized HCD
+ * structure. On failure (e.g. if memory is unavailable), %NULL.
+ */
+struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
+		struct device *dev, const char *bus_name)
+{
+	return __usb_create_hcd(driver, dev, dev, bus_name, NULL);
+}
+EXPORT_SYMBOL_GPL(usb_create_hcd);
+
+/*
+ * Roothubs that share one PCI device must also share the bandwidth mutex.
+ * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is
+ * deallocated.
+ *
+ * Make sure to deallocate the bandwidth_mutex only when the last HCD is
+ * freed.  When hcd_release() is called for either hcd in a peer set,
+ * invalidate the peer's ->shared_hcd and ->primary_hcd pointers.
+ */
+static void hcd_release(struct kref *kref)
+{
+	struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
+
+	mutex_lock(&usb_port_peer_mutex);
+	if (hcd->shared_hcd) {
+		struct usb_hcd *peer = hcd->shared_hcd;
+
+		peer->shared_hcd = NULL;
+		peer->primary_hcd = NULL;
+	} else {
+		kfree(hcd->address0_mutex);
+		kfree(hcd->bandwidth_mutex);
+	}
+	mutex_unlock(&usb_port_peer_mutex);
+	kfree(hcd);
+}
+
+struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
+{
+	if (hcd)
+		kref_get (&hcd->kref);
+	return hcd;
+}
+EXPORT_SYMBOL_GPL(usb_get_hcd);
+
+void usb_put_hcd (struct usb_hcd *hcd)
+{
+	if (hcd)
+		kref_put (&hcd->kref, hcd_release);
+}
+EXPORT_SYMBOL_GPL(usb_put_hcd);
+
+int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
+{
+	if (!hcd->primary_hcd)
+		return 1;
+	return hcd == hcd->primary_hcd;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
+
+int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1)
+{
+	if (!hcd->driver->find_raw_port_number)
+		return port1;
+
+	return hcd->driver->find_raw_port_number(hcd, port1);
+}
+
+static int usb_hcd_request_irqs(struct usb_hcd *hcd,
+		unsigned int irqnum, unsigned long irqflags)
+{
+	int retval;
+
+	if (hcd->driver->irq) {
+
+		snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
+				hcd->driver->description, hcd->self.busnum);
+		retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
+				hcd->irq_descr, hcd);
+		if (retval != 0) {
+			dev_err(hcd->self.controller,
+					"request interrupt %d failed\n",
+					irqnum);
+			return retval;
+		}
+		hcd->irq = irqnum;
+		dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
+				(hcd->driver->flags & HCD_MEMORY) ?
+					"io mem" : "io port",
+				(unsigned long long)hcd->rsrc_start);
+	} else {
+		hcd->irq = 0;
+		if (hcd->rsrc_start)
+			dev_info(hcd->self.controller, "%s 0x%08llx\n",
+					(hcd->driver->flags & HCD_MEMORY) ?
+						"io mem" : "io port",
+					(unsigned long long)hcd->rsrc_start);
+	}
+	return 0;
+}
+
+/*
+ * Before we free this root hub, flush in-flight peering attempts
+ * and disable peer lookups
+ */
+static void usb_put_invalidate_rhdev(struct usb_hcd *hcd)
+{
+	struct usb_device *rhdev;
+
+	mutex_lock(&usb_port_peer_mutex);
+	rhdev = hcd->self.root_hub;
+	hcd->self.root_hub = NULL;
+	mutex_unlock(&usb_port_peer_mutex);
+	usb_put_dev(rhdev);
+}
+
+/**
+ * usb_stop_hcd - Halt the HCD
+ * @hcd: the usb_hcd that has to be halted
+ *
+ * Stop the root-hub polling timer and invoke the HCD's ->stop callback.
+ */
+static void usb_stop_hcd(struct usb_hcd *hcd)
+{
+	hcd->rh_pollable = 0;
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	del_timer_sync(&hcd->rh_timer);
+
+	hcd->driver->stop(hcd);
+	hcd->state = HC_STATE_HALT;
+
+	/* In case the HCD restarted the timer, stop it again. */
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	del_timer_sync(&hcd->rh_timer);
+}
+
+/**
+ * usb_add_hcd - finish generic HCD structure initialization and register
+ * @hcd: the usb_hcd structure to initialize
+ * @irqnum: Interrupt line to allocate
+ * @irqflags: Interrupt type flags
+ *
+ * Finish the remaining parts of generic HCD initialization: allocate the
+ * buffers of consistent memory, register the bus, request the IRQ line,
+ * and call the driver's reset() and start() routines.
+ */
+int usb_add_hcd(struct usb_hcd *hcd,
+		unsigned int irqnum, unsigned long irqflags)
+{
+	int retval;
+	struct usb_device *rhdev;
+	struct usb_hcd *shared_hcd;
+
+	if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) {
+		hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev);
+		if (IS_ERR(hcd->phy_roothub))
+			return PTR_ERR(hcd->phy_roothub);
+
+		retval = usb_phy_roothub_init(hcd->phy_roothub);
+		if (retval)
+			return retval;
+
+		retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
+						  PHY_MODE_USB_HOST_SS);
+		if (retval)
+			retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
+							  PHY_MODE_USB_HOST);
+		if (retval)
+			goto err_usb_phy_roothub_power_on;
+
+		retval = usb_phy_roothub_power_on(hcd->phy_roothub);
+		if (retval)
+			goto err_usb_phy_roothub_power_on;
+	}
+
+	dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
+
+	switch (authorized_default) {
+	case USB_AUTHORIZE_NONE:
+		hcd->dev_policy = USB_DEVICE_AUTHORIZE_NONE;
+		break;
+
+	case USB_AUTHORIZE_ALL:
+		hcd->dev_policy = USB_DEVICE_AUTHORIZE_ALL;
+		break;
+
+	case USB_AUTHORIZE_INTERNAL:
+		hcd->dev_policy = USB_DEVICE_AUTHORIZE_INTERNAL;
+		break;
+
+	case USB_AUTHORIZE_WIRED:
+	default:
+		hcd->dev_policy = hcd->wireless ?
+			USB_DEVICE_AUTHORIZE_NONE : USB_DEVICE_AUTHORIZE_ALL;
+		break;
+	}
+
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	/* per default all interfaces are authorized */
+	set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
+
+	/* HC is in reset state, but accessible.  Now do the one-time init,
+	 * bottom up so that hcds can customize the root hubs before hub_wq
+	 * starts talking to them.  (Note, bus id is assigned early too.)
+	 */
+	retval = hcd_buffer_create(hcd);
+	if (retval != 0) {
+		dev_dbg(hcd->self.sysdev, "pool alloc failed\n");
+		goto err_create_buf;
+	}
+
+	retval = usb_register_bus(&hcd->self);
+	if (retval < 0)
+		goto err_register_bus;
+
+	rhdev = usb_alloc_dev(NULL, &hcd->self, 0);
+	if (rhdev == NULL) {
+		dev_err(hcd->self.sysdev, "unable to allocate root hub\n");
+		retval = -ENOMEM;
+		goto err_allocate_root_hub;
+	}
+	mutex_lock(&usb_port_peer_mutex);
+	hcd->self.root_hub = rhdev;
+	mutex_unlock(&usb_port_peer_mutex);
+
+	rhdev->rx_lanes = 1;
+	rhdev->tx_lanes = 1;
+	rhdev->ssp_rate = USB_SSP_GEN_UNKNOWN;
+
+	switch (hcd->speed) {
+	case HCD_USB11:
+		rhdev->speed = USB_SPEED_FULL;
+		break;
+	case HCD_USB2:
+		rhdev->speed = USB_SPEED_HIGH;
+		break;
+	case HCD_USB25:
+		rhdev->speed = USB_SPEED_WIRELESS;
+		break;
+	case HCD_USB3:
+		rhdev->speed = USB_SPEED_SUPER;
+		break;
+	case HCD_USB32:
+		rhdev->rx_lanes = 2;
+		rhdev->tx_lanes = 2;
+		rhdev->ssp_rate = USB_SSP_GEN_2x2;
+		rhdev->speed = USB_SPEED_SUPER_PLUS;
+		break;
+	case HCD_USB31:
+		rhdev->ssp_rate = USB_SSP_GEN_2x1;
+		rhdev->speed = USB_SPEED_SUPER_PLUS;
+		break;
+	default:
+		retval = -EINVAL;
+		goto err_set_rh_speed;
+	}
+
+	/* wakeup flag init defaults to "everything works" for root hubs,
+	 * but drivers can override it in reset() if needed, along with
+	 * recording the overall controller's system wakeup capability.
+	 */
+	device_set_wakeup_capable(&rhdev->dev, 1);
+
+	/* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
+	 * registered.  But since the controller can die at any time,
+	 * let's initialize the flag before touching the hardware.
+	 */
+	set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+
+	/* "reset" is misnamed; its role is now one-time init. the controller
+	 * should already have been reset (and boot firmware kicked off etc).
+	 */
+	if (hcd->driver->reset) {
+		retval = hcd->driver->reset(hcd);
+		if (retval < 0) {
+			dev_err(hcd->self.controller, "can't setup: %d\n",
+					retval);
+			goto err_hcd_driver_setup;
+		}
+	}
+	hcd->rh_pollable = 1;
+
+	retval = usb_phy_roothub_calibrate(hcd->phy_roothub);
+	if (retval)
+		goto err_hcd_driver_setup;
+
+	/* NOTE: root hub and controller capabilities may not be the same */
+	if (device_can_wakeup(hcd->self.controller)
+			&& device_can_wakeup(&hcd->self.root_hub->dev))
+		dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
+
+	/* initialize tasklets */
+	init_giveback_urb_bh(&hcd->high_prio_bh);
+	hcd->high_prio_bh.high_prio = true;
+	init_giveback_urb_bh(&hcd->low_prio_bh);
+
+	/* enable irqs just before we start the controller,
+	 * if the BIOS provides legacy PCI irqs.
+	 */
+	if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
+		retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
+		if (retval)
+			goto err_request_irq;
+	}
+
+	hcd->state = HC_STATE_RUNNING;
+	retval = hcd->driver->start(hcd);
+	if (retval < 0) {
+		dev_err(hcd->self.controller, "startup error %d\n", retval);
+		goto err_hcd_driver_start;
+	}
+
+	/* starting here, usbcore will pay attention to the shared HCD roothub */
+	shared_hcd = hcd->shared_hcd;
+	if (!usb_hcd_is_primary_hcd(hcd) && shared_hcd && HCD_DEFER_RH_REGISTER(shared_hcd)) {
+		retval = register_root_hub(shared_hcd);
+		if (retval != 0)
+			goto err_register_root_hub;
+
+		if (shared_hcd->uses_new_polling && HCD_POLL_RH(shared_hcd))
+			usb_hcd_poll_rh_status(shared_hcd);
+	}
+
+	/* starting here, usbcore will pay attention to this root hub */
+	if (!HCD_DEFER_RH_REGISTER(hcd)) {
+		retval = register_root_hub(hcd);
+		if (retval != 0)
+			goto err_register_root_hub;
+
+		if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
+			usb_hcd_poll_rh_status(hcd);
+	}
+
+	return retval;
+
+err_register_root_hub:
+	usb_stop_hcd(hcd);
+err_hcd_driver_start:
+	if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
+		free_irq(irqnum, hcd);
+err_request_irq:
+err_hcd_driver_setup:
+err_set_rh_speed:
+	usb_put_invalidate_rhdev(hcd);
+err_allocate_root_hub:
+	usb_deregister_bus(&hcd->self);
+err_register_bus:
+	hcd_buffer_destroy(hcd);
+err_create_buf:
+	usb_phy_roothub_power_off(hcd->phy_roothub);
+err_usb_phy_roothub_power_on:
+	usb_phy_roothub_exit(hcd->phy_roothub);
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(usb_add_hcd);
+
+/**
+ * usb_remove_hcd - shutdown processing for generic HCDs
+ * @hcd: the usb_hcd structure to remove
+ *
+ * Context: task context, might sleep.
+ *
+ * Disconnects the root hub, then reverses the effects of usb_add_hcd(),
+ * invoking the HCD's stop() method.
+ */
+void usb_remove_hcd(struct usb_hcd *hcd)
+{
+	struct usb_device *rhdev;
+	bool rh_registered;
+
+	if (!hcd) {
+		pr_debug("%s: hcd is NULL\n", __func__);
+		return;
+	}
+	rhdev = hcd->self.root_hub;
+
+	dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
+
+	usb_get_dev(rhdev);
+	clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+	if (HC_IS_RUNNING (hcd->state))
+		hcd->state = HC_STATE_QUIESCING;
+
+	dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
+	spin_lock_irq (&hcd_root_hub_lock);
+	rh_registered = hcd->rh_registered;
+	hcd->rh_registered = 0;
+	spin_unlock_irq (&hcd_root_hub_lock);
+
+#ifdef CONFIG_PM
+	cancel_work_sync(&hcd->wakeup_work);
+#endif
+	cancel_work_sync(&hcd->died_work);
+
+	mutex_lock(&usb_bus_idr_lock);
+	if (rh_registered)
+		usb_disconnect(&rhdev);		/* Sets rhdev to NULL */
+	mutex_unlock(&usb_bus_idr_lock);
+
+	/*
+	 * tasklet_kill() isn't needed here because:
+	 * - driver's disconnect() called from usb_disconnect() should
+	 *   make sure its URBs are completed during the disconnect()
+	 *   callback
+	 *
+	 * - it is too late to run complete() here since driver may have
+	 *   been removed already now
+	 */
+
+	/* Prevent any more root-hub status calls from the timer.
+	 * The HCD might still restart the timer (if a port status change
+	 * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
+	 * the hub_status_data() callback.
+	 */
+	usb_stop_hcd(hcd);
+
+	if (usb_hcd_is_primary_hcd(hcd)) {
+		if (hcd->irq > 0)
+			free_irq(hcd->irq, hcd);
+	}
+
+	usb_deregister_bus(&hcd->self);
+	hcd_buffer_destroy(hcd);
+
+	usb_phy_roothub_power_off(hcd->phy_roothub);
+	usb_phy_roothub_exit(hcd->phy_roothub);
+
+	usb_put_invalidate_rhdev(hcd);
+	hcd->flags = 0;
+}
+EXPORT_SYMBOL_GPL(usb_remove_hcd);
+
+void
+usb_hcd_platform_shutdown(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+
+	/* No need for pm_runtime_put(), we're shutting down */
+	pm_runtime_get_sync(&dev->dev);
+
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
+
+int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr,
+			    dma_addr_t dma, size_t size)
+{
+	int err;
+	void *local_mem;
+
+	hcd->localmem_pool = devm_gen_pool_create(hcd->self.sysdev, 4,
+						  dev_to_node(hcd->self.sysdev),
+						  dev_name(hcd->self.sysdev));
+	if (IS_ERR(hcd->localmem_pool))
+		return PTR_ERR(hcd->localmem_pool);
+
+	/*
+	 * if a physical SRAM address was passed, map it, otherwise
+	 * allocate system memory as a buffer.
+	 */
+	if (phys_addr)
+		local_mem = devm_memremap(hcd->self.sysdev, phys_addr,
+					  size, MEMREMAP_WC);
+	else
+		local_mem = dmam_alloc_attrs(hcd->self.sysdev, size, &dma,
+					     GFP_KERNEL,
+					     DMA_ATTR_WRITE_COMBINE);
+
+	if (IS_ERR_OR_NULL(local_mem)) {
+		if (!local_mem)
+			return -ENOMEM;
+
+		return PTR_ERR(local_mem);
+	}
+
+	/*
+	 * Here we pass a dma_addr_t but the arg type is a phys_addr_t.
+	 * It's not backed by system memory and thus there's no kernel mapping
+	 * for it.
+	 */
+	err = gen_pool_add_virt(hcd->localmem_pool, (unsigned long)local_mem,
+				dma, size, dev_to_node(hcd->self.sysdev));
+	if (err < 0) {
+		dev_err(hcd->self.sysdev, "gen_pool_add_virt failed with %d\n",
+			err);
+		return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_setup_local_mem);
+
+/*-------------------------------------------------------------------------*/
+
+#if IS_ENABLED(CONFIG_USB_MON)
+
+const struct usb_mon_operations *mon_ops;
+
+/*
+ * The registration is unlocked.
+ * We do it this way because we do not want to lock in hot paths.
+ *
+ * Notice that the code is minimally error-proof. Because usbmon needs
+ * symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
+ */
+
+int usb_mon_register(const struct usb_mon_operations *ops)
+{
+
+	if (mon_ops)
+		return -EBUSY;
+
+	mon_ops = ops;
+	mb();
+	return 0;
+}
+EXPORT_SYMBOL_GPL (usb_mon_register);
+
+void usb_mon_deregister (void)
+{
+
+	if (mon_ops == NULL) {
+		printk(KERN_ERR "USB: monitor was not registered\n");
+		return;
+	}
+	mon_ops = NULL;
+	mb();
+}
+EXPORT_SYMBOL_GPL (usb_mon_deregister);
+
+#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
new file mode 100644
index 000000000..81c8f564c
--- /dev/null
+++ b/drivers/usb/core/hub.c
@@ -0,0 +1,6362 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB hub driver.
+ *
+ * (C) Copyright 1999 Linus Torvalds
+ * (C) Copyright 1999 Johannes Erdfelt
+ * (C) Copyright 1999 Gregory P. Smith
+ * (C) Copyright 2001 Brad Hards (bhards@bigpond.net.au)
+ *
+ * Released under the GPLv2 only.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/completion.h>
+#include <linux/sched/mm.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/kcov.h>
+#include <linux/ioctl.h>
+#include <linux/usb.h>
+#include <linux/usbdevice_fs.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/onboard_hub.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/quirks.h>
+#include <linux/workqueue.h>
+#include <linux/mutex.h>
+#include <linux/random.h>
+#include <linux/pm_qos.h>
+#include <linux/kobject.h>
+
+#include <linux/bitfield.h>
+#include <linux/uaccess.h>
+#include <asm/byteorder.h>
+
+#include "hub.h"
+#include "otg_productlist.h"
+
+#define USB_VENDOR_GENESYS_LOGIC		0x05e3
+#define USB_VENDOR_SMSC				0x0424
+#define USB_PRODUCT_USB5534B			0x5534
+#define USB_VENDOR_CYPRESS			0x04b4
+#define USB_PRODUCT_CY7C65632			0x6570
+#define USB_VENDOR_TEXAS_INSTRUMENTS		0x0451
+#define USB_PRODUCT_TUSB8041_USB3		0x8140
+#define USB_PRODUCT_TUSB8041_USB2		0x8142
+#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND	0x01
+#define HUB_QUIRK_DISABLE_AUTOSUSPEND		0x02
+
+#define USB_TP_TRANSMISSION_DELAY	40	/* ns */
+#define USB_TP_TRANSMISSION_DELAY_MAX	65535	/* ns */
+#define USB_PING_RESPONSE_TIME		400	/* ns */
+
+/* Protect struct usb_device->state and ->children members
+ * Note: Both are also protected by ->dev.sem, except that ->state can
+ * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */
+static DEFINE_SPINLOCK(device_state_lock);
+
+/* workqueue to process hub events */
+static struct workqueue_struct *hub_wq;
+static void hub_event(struct work_struct *work);
+
+/* synchronize hub-port add/remove and peering operations */
+DEFINE_MUTEX(usb_port_peer_mutex);
+
+/* cycle leds on hubs that aren't blinking for attention */
+static bool blinkenlights;
+module_param(blinkenlights, bool, S_IRUGO);
+MODULE_PARM_DESC(blinkenlights, "true to cycle leds on hubs");
+
+/*
+ * Device SATA8000 FW1.0 from DATAST0R Technology Corp requires about
+ * 10 seconds to send reply for the initial 64-byte descriptor request.
+ */
+/* define initial 64-byte descriptor request timeout in milliseconds */
+static int initial_descriptor_timeout = USB_CTRL_GET_TIMEOUT;
+module_param(initial_descriptor_timeout, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(initial_descriptor_timeout,
+		"initial 64-byte descriptor request timeout in milliseconds "
+		"(default 5000 - 5.0 seconds)");
+
+/*
+ * As of 2.6.10 we introduce a new USB device initialization scheme which
+ * closely resembles the way Windows works.  Hopefully it will be compatible
+ * with a wider range of devices than the old scheme.  However some previously
+ * working devices may start giving rise to "device not accepting address"
+ * errors; if that happens the user can try the old scheme by adjusting the
+ * following module parameters.
+ *
+ * For maximum flexibility there are two boolean parameters to control the
+ * hub driver's behavior.  On the first initialization attempt, if the
+ * "old_scheme_first" parameter is set then the old scheme will be used,
+ * otherwise the new scheme is used.  If that fails and "use_both_schemes"
+ * is set, then the driver will make another attempt, using the other scheme.
+ */
+static bool old_scheme_first;
+module_param(old_scheme_first, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(old_scheme_first,
+		 "start with the old device initialization scheme");
+
+static bool use_both_schemes = true;
+module_param(use_both_schemes, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(use_both_schemes,
+		"try the other device initialization scheme if the "
+		"first one fails");
+
+/* Mutual exclusion for EHCI CF initialization.  This interferes with
+ * port reset on some companion controllers.
+ */
+DECLARE_RWSEM(ehci_cf_port_reset_rwsem);
+EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
+
+#define HUB_DEBOUNCE_TIMEOUT	2000
+#define HUB_DEBOUNCE_STEP	  25
+#define HUB_DEBOUNCE_STABLE	 100
+
+static void hub_release(struct kref *kref);
+static int usb_reset_and_verify_device(struct usb_device *udev);
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state);
+static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1,
+		u16 portstatus);
+
+static inline char *portspeed(struct usb_hub *hub, int portstatus)
+{
+	if (hub_is_superspeedplus(hub->hdev))
+		return "10.0 Gb/s";
+	if (hub_is_superspeed(hub->hdev))
+		return "5.0 Gb/s";
+	if (portstatus & USB_PORT_STAT_HIGH_SPEED)
+		return "480 Mb/s";
+	else if (portstatus & USB_PORT_STAT_LOW_SPEED)
+		return "1.5 Mb/s";
+	else
+		return "12 Mb/s";
+}
+
+/* Note that hdev or one of its children must be locked! */
+struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev)
+{
+	if (!hdev || !hdev->actconfig || !hdev->maxchild)
+		return NULL;
+	return usb_get_intfdata(hdev->actconfig->interface[0]);
+}
+
+int usb_device_supports_lpm(struct usb_device *udev)
+{
+	/* Some devices have trouble with LPM */
+	if (udev->quirks & USB_QUIRK_NO_LPM)
+		return 0;
+
+	/* Skip if the device BOS descriptor couldn't be read */
+	if (!udev->bos)
+		return 0;
+
+	/* USB 2.1 (and greater) devices indicate LPM support through
+	 * their USB 2.0 Extended Capabilities BOS descriptor.
+	 */
+	if (udev->speed == USB_SPEED_HIGH || udev->speed == USB_SPEED_FULL) {
+		if (udev->bos->ext_cap &&
+			(USB_LPM_SUPPORT &
+			 le32_to_cpu(udev->bos->ext_cap->bmAttributes)))
+			return 1;
+		return 0;
+	}
+
+	/*
+	 * According to the USB 3.0 spec, all USB 3.0 devices must support LPM.
+	 * However, there are some that don't, and they set the U1/U2 exit
+	 * latencies to zero.
+	 */
+	if (!udev->bos->ss_cap) {
+		dev_info(&udev->dev, "No LPM exit latency info found, disabling LPM.\n");
+		return 0;
+	}
+
+	if (udev->bos->ss_cap->bU1devExitLat == 0 &&
+			udev->bos->ss_cap->bU2DevExitLat == 0) {
+		if (udev->parent)
+			dev_info(&udev->dev, "LPM exit latency is zeroed, disabling LPM.\n");
+		else
+			dev_info(&udev->dev, "We don't know the algorithms for LPM for this host, disabling LPM.\n");
+		return 0;
+	}
+
+	if (!udev->parent || udev->parent->lpm_capable)
+		return 1;
+	return 0;
+}
+
+/*
+ * Set the Maximum Exit Latency (MEL) for the host to wakup up the path from
+ * U1/U2, send a PING to the device and receive a PING_RESPONSE.
+ * See USB 3.1 section C.1.5.2
+ */
+static void usb_set_lpm_mel(struct usb_device *udev,
+		struct usb3_lpm_parameters *udev_lpm_params,
+		unsigned int udev_exit_latency,
+		struct usb_hub *hub,
+		struct usb3_lpm_parameters *hub_lpm_params,
+		unsigned int hub_exit_latency)
+{
+	unsigned int total_mel;
+
+	/*
+	 * tMEL1. time to transition path from host to device into U0.
+	 * MEL for parent already contains the delay up to parent, so only add
+	 * the exit latency for the last link (pick the slower exit latency),
+	 * and the hub header decode latency. See USB 3.1 section C 2.2.1
+	 * Store MEL in nanoseconds
+	 */
+	total_mel = hub_lpm_params->mel +
+		max(udev_exit_latency, hub_exit_latency) * 1000 +
+		hub->descriptor->u.ss.bHubHdrDecLat * 100;
+
+	/*
+	 * tMEL2. Time to submit PING packet. Sum of tTPTransmissionDelay for
+	 * each link + wHubDelay for each hub. Add only for last link.
+	 * tMEL4, the time for PING_RESPONSE to traverse upstream is similar.
+	 * Multiply by 2 to include it as well.
+	 */
+	total_mel += (__le16_to_cpu(hub->descriptor->u.ss.wHubDelay) +
+		      USB_TP_TRANSMISSION_DELAY) * 2;
+
+	/*
+	 * tMEL3, tPingResponse. Time taken by device to generate PING_RESPONSE
+	 * after receiving PING. Also add 2100ns as stated in USB 3.1 C 1.5.2.4
+	 * to cover the delay if the PING_RESPONSE is queued behind a Max Packet
+	 * Size DP.
+	 * Note these delays should be added only once for the entire path, so
+	 * add them to the MEL of the device connected to the roothub.
+	 */
+	if (!hub->hdev->parent)
+		total_mel += USB_PING_RESPONSE_TIME + 2100;
+
+	udev_lpm_params->mel = total_mel;
+}
+
+/*
+ * Set the maximum Device to Host Exit Latency (PEL) for the device to initiate
+ * a transition from either U1 or U2.
+ */
+static void usb_set_lpm_pel(struct usb_device *udev,
+		struct usb3_lpm_parameters *udev_lpm_params,
+		unsigned int udev_exit_latency,
+		struct usb_hub *hub,
+		struct usb3_lpm_parameters *hub_lpm_params,
+		unsigned int hub_exit_latency,
+		unsigned int port_to_port_exit_latency)
+{
+	unsigned int first_link_pel;
+	unsigned int hub_pel;
+
+	/*
+	 * First, the device sends an LFPS to transition the link between the
+	 * device and the parent hub into U0.  The exit latency is the bigger of
+	 * the device exit latency or the hub exit latency.
+	 */
+	if (udev_exit_latency > hub_exit_latency)
+		first_link_pel = udev_exit_latency * 1000;
+	else
+		first_link_pel = hub_exit_latency * 1000;
+
+	/*
+	 * When the hub starts to receive the LFPS, there is a slight delay for
+	 * it to figure out that one of the ports is sending an LFPS.  Then it
+	 * will forward the LFPS to its upstream link.  The exit latency is the
+	 * delay, plus the PEL that we calculated for this hub.
+	 */
+	hub_pel = port_to_port_exit_latency * 1000 + hub_lpm_params->pel;
+
+	/*
+	 * According to figure C-7 in the USB 3.0 spec, the PEL for this device
+	 * is the greater of the two exit latencies.
+	 */
+	if (first_link_pel > hub_pel)
+		udev_lpm_params->pel = first_link_pel;
+	else
+		udev_lpm_params->pel = hub_pel;
+}
+
+/*
+ * Set the System Exit Latency (SEL) to indicate the total worst-case time from
+ * when a device initiates a transition to U0, until when it will receive the
+ * first packet from the host controller.
+ *
+ * Section C.1.5.1 describes the four components to this:
+ *  - t1: device PEL
+ *  - t2: time for the ERDY to make it from the device to the host.
+ *  - t3: a host-specific delay to process the ERDY.
+ *  - t4: time for the packet to make it from the host to the device.
+ *
+ * t3 is specific to both the xHCI host and the platform the host is integrated
+ * into.  The Intel HW folks have said it's negligible, FIXME if a different
+ * vendor says otherwise.
+ */
+static void usb_set_lpm_sel(struct usb_device *udev,
+		struct usb3_lpm_parameters *udev_lpm_params)
+{
+	struct usb_device *parent;
+	unsigned int num_hubs;
+	unsigned int total_sel;
+
+	/* t1 = device PEL */
+	total_sel = udev_lpm_params->pel;
+	/* How many external hubs are in between the device & the root port. */
+	for (parent = udev->parent, num_hubs = 0; parent->parent;
+			parent = parent->parent)
+		num_hubs++;
+	/* t2 = 2.1us + 250ns * (num_hubs - 1) */
+	if (num_hubs > 0)
+		total_sel += 2100 + 250 * (num_hubs - 1);
+
+	/* t4 = 250ns * num_hubs */
+	total_sel += 250 * num_hubs;
+
+	udev_lpm_params->sel = total_sel;
+}
+
+static void usb_set_lpm_parameters(struct usb_device *udev)
+{
+	struct usb_hub *hub;
+	unsigned int port_to_port_delay;
+	unsigned int udev_u1_del;
+	unsigned int udev_u2_del;
+	unsigned int hub_u1_del;
+	unsigned int hub_u2_del;
+
+	if (!udev->lpm_capable || udev->speed < USB_SPEED_SUPER)
+		return;
+
+	/* Skip if the device BOS descriptor couldn't be read */
+	if (!udev->bos)
+		return;
+
+	hub = usb_hub_to_struct_hub(udev->parent);
+	/* It doesn't take time to transition the roothub into U0, since it
+	 * doesn't have an upstream link.
+	 */
+	if (!hub)
+		return;
+
+	udev_u1_del = udev->bos->ss_cap->bU1devExitLat;
+	udev_u2_del = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat);
+	hub_u1_del = udev->parent->bos->ss_cap->bU1devExitLat;
+	hub_u2_del = le16_to_cpu(udev->parent->bos->ss_cap->bU2DevExitLat);
+
+	usb_set_lpm_mel(udev, &udev->u1_params, udev_u1_del,
+			hub, &udev->parent->u1_params, hub_u1_del);
+
+	usb_set_lpm_mel(udev, &udev->u2_params, udev_u2_del,
+			hub, &udev->parent->u2_params, hub_u2_del);
+
+	/*
+	 * Appendix C, section C.2.2.2, says that there is a slight delay from
+	 * when the parent hub notices the downstream port is trying to
+	 * transition to U0 to when the hub initiates a U0 transition on its
+	 * upstream port.  The section says the delays are tPort2PortU1EL and
+	 * tPort2PortU2EL, but it doesn't define what they are.
+	 *
+	 * The hub chapter, sections 10.4.2.4 and 10.4.2.5 seem to be talking
+	 * about the same delays.  Use the maximum delay calculations from those
+	 * sections.  For U1, it's tHubPort2PortExitLat, which is 1us max.  For
+	 * U2, it's tHubPort2PortExitLat + U2DevExitLat - U1DevExitLat.  I
+	 * assume the device exit latencies they are talking about are the hub
+	 * exit latencies.
+	 *
+	 * What do we do if the U2 exit latency is less than the U1 exit
+	 * latency?  It's possible, although not likely...
+	 */
+	port_to_port_delay = 1;
+
+	usb_set_lpm_pel(udev, &udev->u1_params, udev_u1_del,
+			hub, &udev->parent->u1_params, hub_u1_del,
+			port_to_port_delay);
+
+	if (hub_u2_del > hub_u1_del)
+		port_to_port_delay = 1 + hub_u2_del - hub_u1_del;
+	else
+		port_to_port_delay = 1 + hub_u1_del;
+
+	usb_set_lpm_pel(udev, &udev->u2_params, udev_u2_del,
+			hub, &udev->parent->u2_params, hub_u2_del,
+			port_to_port_delay);
+
+	/* Now that we've got PEL, calculate SEL. */
+	usb_set_lpm_sel(udev, &udev->u1_params);
+	usb_set_lpm_sel(udev, &udev->u2_params);
+}
+
+/* USB 2.0 spec Section 11.24.4.5 */
+static int get_hub_descriptor(struct usb_device *hdev,
+		struct usb_hub_descriptor *desc)
+{
+	int i, ret, size;
+	unsigned dtype;
+
+	if (hub_is_superspeed(hdev)) {
+		dtype = USB_DT_SS_HUB;
+		size = USB_DT_SS_HUB_SIZE;
+	} else {
+		dtype = USB_DT_HUB;
+		size = sizeof(struct usb_hub_descriptor);
+	}
+
+	for (i = 0; i < 3; i++) {
+		ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+			USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
+			dtype << 8, 0, desc, size,
+			USB_CTRL_GET_TIMEOUT);
+		if (hub_is_superspeed(hdev)) {
+			if (ret == size)
+				return ret;
+		} else if (ret >= USB_DT_HUB_NONVAR_SIZE + 2) {
+			/* Make sure we have the DeviceRemovable field. */
+			size = USB_DT_HUB_NONVAR_SIZE + desc->bNbrPorts / 8 + 1;
+			if (ret < size)
+				return -EMSGSIZE;
+			return ret;
+		}
+	}
+	return -EINVAL;
+}
+
+/*
+ * USB 2.0 spec Section 11.24.2.1
+ */
+static int clear_hub_feature(struct usb_device *hdev, int feature)
+{
+	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+		USB_REQ_CLEAR_FEATURE, USB_RT_HUB, feature, 0, NULL, 0, 1000);
+}
+
+/*
+ * USB 2.0 spec Section 11.24.2.2
+ */
+int usb_clear_port_feature(struct usb_device *hdev, int port1, int feature)
+{
+	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+		USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port1,
+		NULL, 0, 1000);
+}
+
+/*
+ * USB 2.0 spec Section 11.24.2.13
+ */
+static int set_port_feature(struct usb_device *hdev, int port1, int feature)
+{
+	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+		USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port1,
+		NULL, 0, 1000);
+}
+
+static char *to_led_name(int selector)
+{
+	switch (selector) {
+	case HUB_LED_AMBER:
+		return "amber";
+	case HUB_LED_GREEN:
+		return "green";
+	case HUB_LED_OFF:
+		return "off";
+	case HUB_LED_AUTO:
+		return "auto";
+	default:
+		return "??";
+	}
+}
+
+/*
+ * USB 2.0 spec Section 11.24.2.7.1.10 and table 11-7
+ * for info about using port indicators
+ */
+static void set_port_led(struct usb_hub *hub, int port1, int selector)
+{
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	int status;
+
+	status = set_port_feature(hub->hdev, (selector << 8) | port1,
+			USB_PORT_FEAT_INDICATOR);
+	dev_dbg(&port_dev->dev, "indicator %s status %d\n",
+		to_led_name(selector), status);
+}
+
+#define	LED_CYCLE_PERIOD	((2*HZ)/3)
+
+static void led_work(struct work_struct *work)
+{
+	struct usb_hub		*hub =
+		container_of(work, struct usb_hub, leds.work);
+	struct usb_device	*hdev = hub->hdev;
+	unsigned		i;
+	unsigned		changed = 0;
+	int			cursor = -1;
+
+	if (hdev->state != USB_STATE_CONFIGURED || hub->quiescing)
+		return;
+
+	for (i = 0; i < hdev->maxchild; i++) {
+		unsigned	selector, mode;
+
+		/* 30%-50% duty cycle */
+
+		switch (hub->indicator[i]) {
+		/* cycle marker */
+		case INDICATOR_CYCLE:
+			cursor = i;
+			selector = HUB_LED_AUTO;
+			mode = INDICATOR_AUTO;
+			break;
+		/* blinking green = sw attention */
+		case INDICATOR_GREEN_BLINK:
+			selector = HUB_LED_GREEN;
+			mode = INDICATOR_GREEN_BLINK_OFF;
+			break;
+		case INDICATOR_GREEN_BLINK_OFF:
+			selector = HUB_LED_OFF;
+			mode = INDICATOR_GREEN_BLINK;
+			break;
+		/* blinking amber = hw attention */
+		case INDICATOR_AMBER_BLINK:
+			selector = HUB_LED_AMBER;
+			mode = INDICATOR_AMBER_BLINK_OFF;
+			break;
+		case INDICATOR_AMBER_BLINK_OFF:
+			selector = HUB_LED_OFF;
+			mode = INDICATOR_AMBER_BLINK;
+			break;
+		/* blink green/amber = reserved */
+		case INDICATOR_ALT_BLINK:
+			selector = HUB_LED_GREEN;
+			mode = INDICATOR_ALT_BLINK_OFF;
+			break;
+		case INDICATOR_ALT_BLINK_OFF:
+			selector = HUB_LED_AMBER;
+			mode = INDICATOR_ALT_BLINK;
+			break;
+		default:
+			continue;
+		}
+		if (selector != HUB_LED_AUTO)
+			changed = 1;
+		set_port_led(hub, i + 1, selector);
+		hub->indicator[i] = mode;
+	}
+	if (!changed && blinkenlights) {
+		cursor++;
+		cursor %= hdev->maxchild;
+		set_port_led(hub, cursor + 1, HUB_LED_GREEN);
+		hub->indicator[cursor] = INDICATOR_CYCLE;
+		changed++;
+	}
+	if (changed)
+		queue_delayed_work(system_power_efficient_wq,
+				&hub->leds, LED_CYCLE_PERIOD);
+}
+
+/* use a short timeout for hub/port status fetches */
+#define	USB_STS_TIMEOUT		1000
+#define	USB_STS_RETRIES		5
+
+/*
+ * USB 2.0 spec Section 11.24.2.6
+ */
+static int get_hub_status(struct usb_device *hdev,
+		struct usb_hub_status *data)
+{
+	int i, status = -ETIMEDOUT;
+
+	for (i = 0; i < USB_STS_RETRIES &&
+			(status == -ETIMEDOUT || status == -EPIPE); i++) {
+		status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+			USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
+			data, sizeof(*data), USB_STS_TIMEOUT);
+	}
+	return status;
+}
+
+/*
+ * USB 2.0 spec Section 11.24.2.7
+ * USB 3.1 takes into use the wValue and wLength fields, spec Section 10.16.2.6
+ */
+static int get_port_status(struct usb_device *hdev, int port1,
+			   void *data, u16 value, u16 length)
+{
+	int i, status = -ETIMEDOUT;
+
+	for (i = 0; i < USB_STS_RETRIES &&
+			(status == -ETIMEDOUT || status == -EPIPE); i++) {
+		status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+			USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, value,
+			port1, data, length, USB_STS_TIMEOUT);
+	}
+	return status;
+}
+
+static int hub_ext_port_status(struct usb_hub *hub, int port1, int type,
+			       u16 *status, u16 *change, u32 *ext_status)
+{
+	int ret;
+	int len = 4;
+
+	if (type != HUB_PORT_STATUS)
+		len = 8;
+
+	mutex_lock(&hub->status_mutex);
+	ret = get_port_status(hub->hdev, port1, &hub->status->port, type, len);
+	if (ret < len) {
+		if (ret != -ENODEV)
+			dev_err(hub->intfdev,
+				"%s failed (err = %d)\n", __func__, ret);
+		if (ret >= 0)
+			ret = -EIO;
+	} else {
+		*status = le16_to_cpu(hub->status->port.wPortStatus);
+		*change = le16_to_cpu(hub->status->port.wPortChange);
+		if (type != HUB_PORT_STATUS && ext_status)
+			*ext_status = le32_to_cpu(
+				hub->status->port.dwExtPortStatus);
+		ret = 0;
+	}
+	mutex_unlock(&hub->status_mutex);
+	return ret;
+}
+
+int usb_hub_port_status(struct usb_hub *hub, int port1,
+		u16 *status, u16 *change)
+{
+	return hub_ext_port_status(hub, port1, HUB_PORT_STATUS,
+				   status, change, NULL);
+}
+
+static void hub_resubmit_irq_urb(struct usb_hub *hub)
+{
+	unsigned long flags;
+	int status;
+
+	spin_lock_irqsave(&hub->irq_urb_lock, flags);
+
+	if (hub->quiescing) {
+		spin_unlock_irqrestore(&hub->irq_urb_lock, flags);
+		return;
+	}
+
+	status = usb_submit_urb(hub->urb, GFP_ATOMIC);
+	if (status && status != -ENODEV && status != -EPERM &&
+	    status != -ESHUTDOWN) {
+		dev_err(hub->intfdev, "resubmit --> %d\n", status);
+		mod_timer(&hub->irq_urb_retry, jiffies + HZ);
+	}
+
+	spin_unlock_irqrestore(&hub->irq_urb_lock, flags);
+}
+
+static void hub_retry_irq_urb(struct timer_list *t)
+{
+	struct usb_hub *hub = from_timer(hub, t, irq_urb_retry);
+
+	hub_resubmit_irq_urb(hub);
+}
+
+
+static void kick_hub_wq(struct usb_hub *hub)
+{
+	struct usb_interface *intf;
+
+	if (hub->disconnected || work_pending(&hub->events))
+		return;
+
+	/*
+	 * Suppress autosuspend until the event is proceed.
+	 *
+	 * Be careful and make sure that the symmetric operation is
+	 * always called. We are here only when there is no pending
+	 * work for this hub. Therefore put the interface either when
+	 * the new work is called or when it is canceled.
+	 */
+	intf = to_usb_interface(hub->intfdev);
+	usb_autopm_get_interface_no_resume(intf);
+	kref_get(&hub->kref);
+
+	if (queue_work(hub_wq, &hub->events))
+		return;
+
+	/* the work has already been scheduled */
+	usb_autopm_put_interface_async(intf);
+	kref_put(&hub->kref, hub_release);
+}
+
+void usb_kick_hub_wq(struct usb_device *hdev)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+
+	if (hub)
+		kick_hub_wq(hub);
+}
+
+/*
+ * Let the USB core know that a USB 3.0 device has sent a Function Wake Device
+ * Notification, which indicates it had initiated remote wakeup.
+ *
+ * USB 3.0 hubs do not report the port link state change from U3 to U0 when the
+ * device initiates resume, so the USB core will not receive notice of the
+ * resume through the normal hub interrupt URB.
+ */
+void usb_wakeup_notification(struct usb_device *hdev,
+		unsigned int portnum)
+{
+	struct usb_hub *hub;
+	struct usb_port *port_dev;
+
+	if (!hdev)
+		return;
+
+	hub = usb_hub_to_struct_hub(hdev);
+	if (hub) {
+		port_dev = hub->ports[portnum - 1];
+		if (port_dev && port_dev->child)
+			pm_wakeup_event(&port_dev->child->dev, 0);
+
+		set_bit(portnum, hub->wakeup_bits);
+		kick_hub_wq(hub);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_wakeup_notification);
+
+/* completion function, fires on port status changes and various faults */
+static void hub_irq(struct urb *urb)
+{
+	struct usb_hub *hub = urb->context;
+	int status = urb->status;
+	unsigned i;
+	unsigned long bits;
+
+	switch (status) {
+	case -ENOENT:		/* synchronous unlink */
+	case -ECONNRESET:	/* async unlink */
+	case -ESHUTDOWN:	/* hardware going away */
+		return;
+
+	default:		/* presumably an error */
+		/* Cause a hub reset after 10 consecutive errors */
+		dev_dbg(hub->intfdev, "transfer --> %d\n", status);
+		if ((++hub->nerrors < 10) || hub->error)
+			goto resubmit;
+		hub->error = status;
+		fallthrough;
+
+	/* let hub_wq handle things */
+	case 0:			/* we got data:  port status changed */
+		bits = 0;
+		for (i = 0; i < urb->actual_length; ++i)
+			bits |= ((unsigned long) ((*hub->buffer)[i]))
+					<< (i*8);
+		hub->event_bits[0] = bits;
+		break;
+	}
+
+	hub->nerrors = 0;
+
+	/* Something happened, let hub_wq figure it out */
+	kick_hub_wq(hub);
+
+resubmit:
+	hub_resubmit_irq_urb(hub);
+}
+
+/* USB 2.0 spec Section 11.24.2.3 */
+static inline int
+hub_clear_tt_buffer(struct usb_device *hdev, u16 devinfo, u16 tt)
+{
+	/* Need to clear both directions for control ep */
+	if (((devinfo >> 11) & USB_ENDPOINT_XFERTYPE_MASK) ==
+			USB_ENDPOINT_XFER_CONTROL) {
+		int status = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+				HUB_CLEAR_TT_BUFFER, USB_RT_PORT,
+				devinfo ^ 0x8000, tt, NULL, 0, 1000);
+		if (status)
+			return status;
+	}
+	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+			       HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo,
+			       tt, NULL, 0, 1000);
+}
+
+/*
+ * enumeration blocks hub_wq for a long time. we use keventd instead, since
+ * long blocking there is the exception, not the rule.  accordingly, HCDs
+ * talking to TTs must queue control transfers (not just bulk and iso), so
+ * both can talk to the same hub concurrently.
+ */
+static void hub_tt_work(struct work_struct *work)
+{
+	struct usb_hub		*hub =
+		container_of(work, struct usb_hub, tt.clear_work);
+	unsigned long		flags;
+
+	spin_lock_irqsave(&hub->tt.lock, flags);
+	while (!list_empty(&hub->tt.clear_list)) {
+		struct list_head	*next;
+		struct usb_tt_clear	*clear;
+		struct usb_device	*hdev = hub->hdev;
+		const struct hc_driver	*drv;
+		int			status;
+
+		next = hub->tt.clear_list.next;
+		clear = list_entry(next, struct usb_tt_clear, clear_list);
+		list_del(&clear->clear_list);
+
+		/* drop lock so HCD can concurrently report other TT errors */
+		spin_unlock_irqrestore(&hub->tt.lock, flags);
+		status = hub_clear_tt_buffer(hdev, clear->devinfo, clear->tt);
+		if (status && status != -ENODEV)
+			dev_err(&hdev->dev,
+				"clear tt %d (%04x) error %d\n",
+				clear->tt, clear->devinfo, status);
+
+		/* Tell the HCD, even if the operation failed */
+		drv = clear->hcd->driver;
+		if (drv->clear_tt_buffer_complete)
+			(drv->clear_tt_buffer_complete)(clear->hcd, clear->ep);
+
+		kfree(clear);
+		spin_lock_irqsave(&hub->tt.lock, flags);
+	}
+	spin_unlock_irqrestore(&hub->tt.lock, flags);
+}
+
+/**
+ * usb_hub_set_port_power - control hub port's power state
+ * @hdev: USB device belonging to the usb hub
+ * @hub: target hub
+ * @port1: port index
+ * @set: expected status
+ *
+ * call this function to control port's power via setting or
+ * clearing the port's PORT_POWER feature.
+ *
+ * Return: 0 if successful. A negative error code otherwise.
+ */
+int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
+			   int port1, bool set)
+{
+	int ret;
+
+	if (set)
+		ret = set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
+	else
+		ret = usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
+
+	if (ret)
+		return ret;
+
+	if (set)
+		set_bit(port1, hub->power_bits);
+	else
+		clear_bit(port1, hub->power_bits);
+	return 0;
+}
+
+/**
+ * usb_hub_clear_tt_buffer - clear control/bulk TT state in high speed hub
+ * @urb: an URB associated with the failed or incomplete split transaction
+ *
+ * High speed HCDs use this to tell the hub driver that some split control or
+ * bulk transaction failed in a way that requires clearing internal state of
+ * a transaction translator.  This is normally detected (and reported) from
+ * interrupt context.
+ *
+ * It may not be possible for that hub to handle additional full (or low)
+ * speed transactions until that state is fully cleared out.
+ *
+ * Return: 0 if successful. A negative error code otherwise.
+ */
+int usb_hub_clear_tt_buffer(struct urb *urb)
+{
+	struct usb_device	*udev = urb->dev;
+	int			pipe = urb->pipe;
+	struct usb_tt		*tt = udev->tt;
+	unsigned long		flags;
+	struct usb_tt_clear	*clear;
+
+	/* we've got to cope with an arbitrary number of pending TT clears,
+	 * since each TT has "at least two" buffers that can need it (and
+	 * there can be many TTs per hub).  even if they're uncommon.
+	 */
+	clear = kmalloc(sizeof *clear, GFP_ATOMIC);
+	if (clear == NULL) {
+		dev_err(&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
+		/* FIXME recover somehow ... RESET_TT? */
+		return -ENOMEM;
+	}
+
+	/* info that CLEAR_TT_BUFFER needs */
+	clear->tt = tt->multi ? udev->ttport : 1;
+	clear->devinfo = usb_pipeendpoint (pipe);
+	clear->devinfo |= ((u16)udev->devaddr) << 4;
+	clear->devinfo |= usb_pipecontrol(pipe)
+			? (USB_ENDPOINT_XFER_CONTROL << 11)
+			: (USB_ENDPOINT_XFER_BULK << 11);
+	if (usb_pipein(pipe))
+		clear->devinfo |= 1 << 15;
+
+	/* info for completion callback */
+	clear->hcd = bus_to_hcd(udev->bus);
+	clear->ep = urb->ep;
+
+	/* tell keventd to clear state for this TT */
+	spin_lock_irqsave(&tt->lock, flags);
+	list_add_tail(&clear->clear_list, &tt->clear_list);
+	schedule_work(&tt->clear_work);
+	spin_unlock_irqrestore(&tt->lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer);
+
+static void hub_power_on(struct usb_hub *hub, bool do_delay)
+{
+	int port1;
+
+	/* Enable power on each port.  Some hubs have reserved values
+	 * of LPSM (> 2) in their descriptors, even though they are
+	 * USB 2.0 hubs.  Some hubs do not implement port-power switching
+	 * but only emulate it.  In all cases, the ports won't work
+	 * unless we send these messages to the hub.
+	 */
+	if (hub_is_port_power_switchable(hub))
+		dev_dbg(hub->intfdev, "enabling power on all ports\n");
+	else
+		dev_dbg(hub->intfdev, "trying to enable port power on "
+				"non-switchable hub\n");
+	for (port1 = 1; port1 <= hub->hdev->maxchild; port1++)
+		if (test_bit(port1, hub->power_bits))
+			set_port_feature(hub->hdev, port1, USB_PORT_FEAT_POWER);
+		else
+			usb_clear_port_feature(hub->hdev, port1,
+						USB_PORT_FEAT_POWER);
+	if (do_delay)
+		msleep(hub_power_on_good_delay(hub));
+}
+
+static int hub_hub_status(struct usb_hub *hub,
+		u16 *status, u16 *change)
+{
+	int ret;
+
+	mutex_lock(&hub->status_mutex);
+	ret = get_hub_status(hub->hdev, &hub->status->hub);
+	if (ret < 0) {
+		if (ret != -ENODEV)
+			dev_err(hub->intfdev,
+				"%s failed (err = %d)\n", __func__, ret);
+	} else {
+		*status = le16_to_cpu(hub->status->hub.wHubStatus);
+		*change = le16_to_cpu(hub->status->hub.wHubChange);
+		ret = 0;
+	}
+	mutex_unlock(&hub->status_mutex);
+	return ret;
+}
+
+static int hub_set_port_link_state(struct usb_hub *hub, int port1,
+			unsigned int link_status)
+{
+	return set_port_feature(hub->hdev,
+			port1 | (link_status << 3),
+			USB_PORT_FEAT_LINK_STATE);
+}
+
+/*
+ * Disable a port and mark a logical connect-change event, so that some
+ * time later hub_wq will disconnect() any existing usb_device on the port
+ * and will re-enumerate if there actually is a device attached.
+ */
+static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
+{
+	dev_dbg(&hub->ports[port1 - 1]->dev, "logical disconnect\n");
+	hub_port_disable(hub, port1, 1);
+
+	/* FIXME let caller ask to power down the port:
+	 *  - some devices won't enumerate without a VBUS power cycle
+	 *  - SRP saves power that way
+	 *  - ... new call, TBD ...
+	 * That's easy if this hub can switch power per-port, and
+	 * hub_wq reactivates the port later (timer, SRP, etc).
+	 * Powerdown must be optional, because of reset/DFU.
+	 */
+
+	set_bit(port1, hub->change_bits);
+	kick_hub_wq(hub);
+}
+
+/**
+ * usb_remove_device - disable a device's port on its parent hub
+ * @udev: device to be disabled and removed
+ * Context: @udev locked, must be able to sleep.
+ *
+ * After @udev's port has been disabled, hub_wq is notified and it will
+ * see that the device has been disconnected.  When the device is
+ * physically unplugged and something is plugged in, the events will
+ * be received and processed normally.
+ *
+ * Return: 0 if successful. A negative error code otherwise.
+ */
+int usb_remove_device(struct usb_device *udev)
+{
+	struct usb_hub *hub;
+	struct usb_interface *intf;
+	int ret;
+
+	if (!udev->parent)	/* Can't remove a root hub */
+		return -EINVAL;
+	hub = usb_hub_to_struct_hub(udev->parent);
+	intf = to_usb_interface(hub->intfdev);
+
+	ret = usb_autopm_get_interface(intf);
+	if (ret < 0)
+		return ret;
+
+	set_bit(udev->portnum, hub->removed_bits);
+	hub_port_logical_disconnect(hub, udev->portnum);
+	usb_autopm_put_interface(intf);
+	return 0;
+}
+
+enum hub_activation_type {
+	HUB_INIT, HUB_INIT2, HUB_INIT3,		/* INITs must come first */
+	HUB_POST_RESET, HUB_RESUME, HUB_RESET_RESUME,
+};
+
+static void hub_init_func2(struct work_struct *ws);
+static void hub_init_func3(struct work_struct *ws);
+
+static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
+{
+	struct usb_device *hdev = hub->hdev;
+	struct usb_hcd *hcd;
+	int ret;
+	int port1;
+	int status;
+	bool need_debounce_delay = false;
+	unsigned delay;
+
+	/* Continue a partial initialization */
+	if (type == HUB_INIT2 || type == HUB_INIT3) {
+		device_lock(&hdev->dev);
+
+		/* Was the hub disconnected while we were waiting? */
+		if (hub->disconnected)
+			goto disconnected;
+		if (type == HUB_INIT2)
+			goto init2;
+		goto init3;
+	}
+	kref_get(&hub->kref);
+
+	/* The superspeed hub except for root hub has to use Hub Depth
+	 * value as an offset into the route string to locate the bits
+	 * it uses to determine the downstream port number. So hub driver
+	 * should send a set hub depth request to superspeed hub after
+	 * the superspeed hub is set configuration in initialization or
+	 * reset procedure.
+	 *
+	 * After a resume, port power should still be on.
+	 * For any other type of activation, turn it on.
+	 */
+	if (type != HUB_RESUME) {
+		if (hdev->parent && hub_is_superspeed(hdev)) {
+			ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+					HUB_SET_DEPTH, USB_RT_HUB,
+					hdev->level - 1, 0, NULL, 0,
+					USB_CTRL_SET_TIMEOUT);
+			if (ret < 0)
+				dev_err(hub->intfdev,
+						"set hub depth failed\n");
+		}
+
+		/* Speed up system boot by using a delayed_work for the
+		 * hub's initial power-up delays.  This is pretty awkward
+		 * and the implementation looks like a home-brewed sort of
+		 * setjmp/longjmp, but it saves at least 100 ms for each
+		 * root hub (assuming usbcore is compiled into the kernel
+		 * rather than as a module).  It adds up.
+		 *
+		 * This can't be done for HUB_RESUME or HUB_RESET_RESUME
+		 * because for those activation types the ports have to be
+		 * operational when we return.  In theory this could be done
+		 * for HUB_POST_RESET, but it's easier not to.
+		 */
+		if (type == HUB_INIT) {
+			delay = hub_power_on_good_delay(hub);
+
+			hub_power_on(hub, false);
+			INIT_DELAYED_WORK(&hub->init_work, hub_init_func2);
+			queue_delayed_work(system_power_efficient_wq,
+					&hub->init_work,
+					msecs_to_jiffies(delay));
+
+			/* Suppress autosuspend until init is done */
+			usb_autopm_get_interface_no_resume(
+					to_usb_interface(hub->intfdev));
+			return;		/* Continues at init2: below */
+		} else if (type == HUB_RESET_RESUME) {
+			/* The internal host controller state for the hub device
+			 * may be gone after a host power loss on system resume.
+			 * Update the device's info so the HW knows it's a hub.
+			 */
+			hcd = bus_to_hcd(hdev->bus);
+			if (hcd->driver->update_hub_device) {
+				ret = hcd->driver->update_hub_device(hcd, hdev,
+						&hub->tt, GFP_NOIO);
+				if (ret < 0) {
+					dev_err(hub->intfdev,
+						"Host not accepting hub info update\n");
+					dev_err(hub->intfdev,
+						"LS/FS devices and hubs may not work under this hub\n");
+				}
+			}
+			hub_power_on(hub, true);
+		} else {
+			hub_power_on(hub, true);
+		}
+	/* Give some time on remote wakeup to let links to transit to U0 */
+	} else if (hub_is_superspeed(hub->hdev))
+		msleep(20);
+
+ init2:
+
+	/*
+	 * Check each port and set hub->change_bits to let hub_wq know
+	 * which ports need attention.
+	 */
+	for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
+		struct usb_port *port_dev = hub->ports[port1 - 1];
+		struct usb_device *udev = port_dev->child;
+		u16 portstatus, portchange;
+
+		portstatus = portchange = 0;
+		status = usb_hub_port_status(hub, port1, &portstatus, &portchange);
+		if (status)
+			goto abort;
+
+		if (udev || (portstatus & USB_PORT_STAT_CONNECTION))
+			dev_dbg(&port_dev->dev, "status %04x change %04x\n",
+					portstatus, portchange);
+
+		/*
+		 * After anything other than HUB_RESUME (i.e., initialization
+		 * or any sort of reset), every port should be disabled.
+		 * Unconnected ports should likewise be disabled (paranoia),
+		 * and so should ports for which we have no usb_device.
+		 */
+		if ((portstatus & USB_PORT_STAT_ENABLE) && (
+				type != HUB_RESUME ||
+				!(portstatus & USB_PORT_STAT_CONNECTION) ||
+				!udev ||
+				udev->state == USB_STATE_NOTATTACHED)) {
+			/*
+			 * USB3 protocol ports will automatically transition
+			 * to Enabled state when detect an USB3.0 device attach.
+			 * Do not disable USB3 protocol ports, just pretend
+			 * power was lost
+			 */
+			portstatus &= ~USB_PORT_STAT_ENABLE;
+			if (!hub_is_superspeed(hdev))
+				usb_clear_port_feature(hdev, port1,
+						   USB_PORT_FEAT_ENABLE);
+		}
+
+		/* Make sure a warm-reset request is handled by port_event */
+		if (type == HUB_RESUME &&
+		    hub_port_warm_reset_required(hub, port1, portstatus))
+			set_bit(port1, hub->event_bits);
+
+		/*
+		 * Add debounce if USB3 link is in polling/link training state.
+		 * Link will automatically transition to Enabled state after
+		 * link training completes.
+		 */
+		if (hub_is_superspeed(hdev) &&
+		    ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+						USB_SS_PORT_LS_POLLING))
+			need_debounce_delay = true;
+
+		/* Clear status-change flags; we'll debounce later */
+		if (portchange & USB_PORT_STAT_C_CONNECTION) {
+			need_debounce_delay = true;
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_CONNECTION);
+		}
+		if (portchange & USB_PORT_STAT_C_ENABLE) {
+			need_debounce_delay = true;
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_ENABLE);
+		}
+		if (portchange & USB_PORT_STAT_C_RESET) {
+			need_debounce_delay = true;
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_RESET);
+		}
+		if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
+				hub_is_superspeed(hub->hdev)) {
+			need_debounce_delay = true;
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+		}
+		/* We can forget about a "removed" device when there's a
+		 * physical disconnect or the connect status changes.
+		 */
+		if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
+				(portchange & USB_PORT_STAT_C_CONNECTION))
+			clear_bit(port1, hub->removed_bits);
+
+		if (!udev || udev->state == USB_STATE_NOTATTACHED) {
+			/* Tell hub_wq to disconnect the device or
+			 * check for a new connection or over current condition.
+			 * Based on USB2.0 Spec Section 11.12.5,
+			 * C_PORT_OVER_CURRENT could be set while
+			 * PORT_OVER_CURRENT is not. So check for any of them.
+			 */
+			if (udev || (portstatus & USB_PORT_STAT_CONNECTION) ||
+			    (portchange & USB_PORT_STAT_C_CONNECTION) ||
+			    (portstatus & USB_PORT_STAT_OVERCURRENT) ||
+			    (portchange & USB_PORT_STAT_C_OVERCURRENT))
+				set_bit(port1, hub->change_bits);
+
+		} else if (portstatus & USB_PORT_STAT_ENABLE) {
+			bool port_resumed = (portstatus &
+					USB_PORT_STAT_LINK_STATE) ==
+				USB_SS_PORT_LS_U0;
+			/* The power session apparently survived the resume.
+			 * If there was an overcurrent or suspend change
+			 * (i.e., remote wakeup request), have hub_wq
+			 * take care of it.  Look at the port link state
+			 * for USB 3.0 hubs, since they don't have a suspend
+			 * change bit, and they don't set the port link change
+			 * bit on device-initiated resume.
+			 */
+			if (portchange || (hub_is_superspeed(hub->hdev) &&
+						port_resumed))
+				set_bit(port1, hub->event_bits);
+
+		} else if (udev->persist_enabled) {
+#ifdef CONFIG_PM
+			udev->reset_resume = 1;
+#endif
+			/* Don't set the change_bits when the device
+			 * was powered off.
+			 */
+			if (test_bit(port1, hub->power_bits))
+				set_bit(port1, hub->change_bits);
+
+		} else {
+			/* The power session is gone; tell hub_wq */
+			usb_set_device_state(udev, USB_STATE_NOTATTACHED);
+			set_bit(port1, hub->change_bits);
+		}
+	}
+
+	/* If no port-status-change flags were set, we don't need any
+	 * debouncing.  If flags were set we can try to debounce the
+	 * ports all at once right now, instead of letting hub_wq do them
+	 * one at a time later on.
+	 *
+	 * If any port-status changes do occur during this delay, hub_wq
+	 * will see them later and handle them normally.
+	 */
+	if (need_debounce_delay) {
+		delay = HUB_DEBOUNCE_STABLE;
+
+		/* Don't do a long sleep inside a workqueue routine */
+		if (type == HUB_INIT2) {
+			INIT_DELAYED_WORK(&hub->init_work, hub_init_func3);
+			queue_delayed_work(system_power_efficient_wq,
+					&hub->init_work,
+					msecs_to_jiffies(delay));
+			device_unlock(&hdev->dev);
+			return;		/* Continues at init3: below */
+		} else {
+			msleep(delay);
+		}
+	}
+ init3:
+	hub->quiescing = 0;
+
+	status = usb_submit_urb(hub->urb, GFP_NOIO);
+	if (status < 0)
+		dev_err(hub->intfdev, "activate --> %d\n", status);
+	if (hub->has_indicators && blinkenlights)
+		queue_delayed_work(system_power_efficient_wq,
+				&hub->leds, LED_CYCLE_PERIOD);
+
+	/* Scan all ports that need attention */
+	kick_hub_wq(hub);
+ abort:
+	if (type == HUB_INIT2 || type == HUB_INIT3) {
+		/* Allow autosuspend if it was suppressed */
+ disconnected:
+		usb_autopm_put_interface_async(to_usb_interface(hub->intfdev));
+		device_unlock(&hdev->dev);
+	}
+
+	kref_put(&hub->kref, hub_release);
+}
+
+/* Implement the continuations for the delays above */
+static void hub_init_func2(struct work_struct *ws)
+{
+	struct usb_hub *hub = container_of(ws, struct usb_hub, init_work.work);
+
+	hub_activate(hub, HUB_INIT2);
+}
+
+static void hub_init_func3(struct work_struct *ws)
+{
+	struct usb_hub *hub = container_of(ws, struct usb_hub, init_work.work);
+
+	hub_activate(hub, HUB_INIT3);
+}
+
+enum hub_quiescing_type {
+	HUB_DISCONNECT, HUB_PRE_RESET, HUB_SUSPEND
+};
+
+static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
+{
+	struct usb_device *hdev = hub->hdev;
+	unsigned long flags;
+	int i;
+
+	/* hub_wq and related activity won't re-trigger */
+	spin_lock_irqsave(&hub->irq_urb_lock, flags);
+	hub->quiescing = 1;
+	spin_unlock_irqrestore(&hub->irq_urb_lock, flags);
+
+	if (type != HUB_SUSPEND) {
+		/* Disconnect all the children */
+		for (i = 0; i < hdev->maxchild; ++i) {
+			if (hub->ports[i]->child)
+				usb_disconnect(&hub->ports[i]->child);
+		}
+	}
+
+	/* Stop hub_wq and related activity */
+	del_timer_sync(&hub->irq_urb_retry);
+	usb_kill_urb(hub->urb);
+	if (hub->has_indicators)
+		cancel_delayed_work_sync(&hub->leds);
+	if (hub->tt.hub)
+		flush_work(&hub->tt.clear_work);
+}
+
+static void hub_pm_barrier_for_all_ports(struct usb_hub *hub)
+{
+	int i;
+
+	for (i = 0; i < hub->hdev->maxchild; ++i)
+		pm_runtime_barrier(&hub->ports[i]->dev);
+}
+
+/* caller has locked the hub device */
+static int hub_pre_reset(struct usb_interface *intf)
+{
+	struct usb_hub *hub = usb_get_intfdata(intf);
+
+	hub_quiesce(hub, HUB_PRE_RESET);
+	hub->in_reset = 1;
+	hub_pm_barrier_for_all_ports(hub);
+	return 0;
+}
+
+/* caller has locked the hub device */
+static int hub_post_reset(struct usb_interface *intf)
+{
+	struct usb_hub *hub = usb_get_intfdata(intf);
+
+	hub->in_reset = 0;
+	hub_pm_barrier_for_all_ports(hub);
+	hub_activate(hub, HUB_POST_RESET);
+	return 0;
+}
+
+static int hub_configure(struct usb_hub *hub,
+	struct usb_endpoint_descriptor *endpoint)
+{
+	struct usb_hcd *hcd;
+	struct usb_device *hdev = hub->hdev;
+	struct device *hub_dev = hub->intfdev;
+	u16 hubstatus, hubchange;
+	u16 wHubCharacteristics;
+	unsigned int pipe;
+	int maxp, ret, i;
+	char *message = "out of memory";
+	unsigned unit_load;
+	unsigned full_load;
+	unsigned maxchild;
+
+	hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL);
+	if (!hub->buffer) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	hub->status = kmalloc(sizeof(*hub->status), GFP_KERNEL);
+	if (!hub->status) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+	mutex_init(&hub->status_mutex);
+
+	hub->descriptor = kzalloc(sizeof(*hub->descriptor), GFP_KERNEL);
+	if (!hub->descriptor) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	/* Request the entire hub descriptor.
+	 * hub->descriptor can handle USB_MAXCHILDREN ports,
+	 * but a (non-SS) hub can/will return fewer bytes here.
+	 */
+	ret = get_hub_descriptor(hdev, hub->descriptor);
+	if (ret < 0) {
+		message = "can't read hub descriptor";
+		goto fail;
+	}
+
+	maxchild = USB_MAXCHILDREN;
+	if (hub_is_superspeed(hdev))
+		maxchild = min_t(unsigned, maxchild, USB_SS_MAXPORTS);
+
+	if (hub->descriptor->bNbrPorts > maxchild) {
+		message = "hub has too many ports!";
+		ret = -ENODEV;
+		goto fail;
+	} else if (hub->descriptor->bNbrPorts == 0) {
+		message = "hub doesn't have any ports!";
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	/*
+	 * Accumulate wHubDelay + 40ns for every hub in the tree of devices.
+	 * The resulting value will be used for SetIsochDelay() request.
+	 */
+	if (hub_is_superspeed(hdev) || hub_is_superspeedplus(hdev)) {
+		u32 delay = __le16_to_cpu(hub->descriptor->u.ss.wHubDelay);
+
+		if (hdev->parent)
+			delay += hdev->parent->hub_delay;
+
+		delay += USB_TP_TRANSMISSION_DELAY;
+		hdev->hub_delay = min_t(u32, delay, USB_TP_TRANSMISSION_DELAY_MAX);
+	}
+
+	maxchild = hub->descriptor->bNbrPorts;
+	dev_info(hub_dev, "%d port%s detected\n", maxchild,
+			(maxchild == 1) ? "" : "s");
+
+	hub->ports = kcalloc(maxchild, sizeof(struct usb_port *), GFP_KERNEL);
+	if (!hub->ports) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
+	if (hub_is_superspeed(hdev)) {
+		unit_load = 150;
+		full_load = 900;
+	} else {
+		unit_load = 100;
+		full_load = 500;
+	}
+
+	/* FIXME for USB 3.0, skip for now */
+	if ((wHubCharacteristics & HUB_CHAR_COMPOUND) &&
+			!(hub_is_superspeed(hdev))) {
+		char	portstr[USB_MAXCHILDREN + 1];
+
+		for (i = 0; i < maxchild; i++)
+			portstr[i] = hub->descriptor->u.hs.DeviceRemovable
+				    [((i + 1) / 8)] & (1 << ((i + 1) % 8))
+				? 'F' : 'R';
+		portstr[maxchild] = 0;
+		dev_dbg(hub_dev, "compound device; port removable status: %s\n", portstr);
+	} else
+		dev_dbg(hub_dev, "standalone hub\n");
+
+	switch (wHubCharacteristics & HUB_CHAR_LPSM) {
+	case HUB_CHAR_COMMON_LPSM:
+		dev_dbg(hub_dev, "ganged power switching\n");
+		break;
+	case HUB_CHAR_INDV_PORT_LPSM:
+		dev_dbg(hub_dev, "individual port power switching\n");
+		break;
+	case HUB_CHAR_NO_LPSM:
+	case HUB_CHAR_LPSM:
+		dev_dbg(hub_dev, "no power switching (usb 1.0)\n");
+		break;
+	}
+
+	switch (wHubCharacteristics & HUB_CHAR_OCPM) {
+	case HUB_CHAR_COMMON_OCPM:
+		dev_dbg(hub_dev, "global over-current protection\n");
+		break;
+	case HUB_CHAR_INDV_PORT_OCPM:
+		dev_dbg(hub_dev, "individual port over-current protection\n");
+		break;
+	case HUB_CHAR_NO_OCPM:
+	case HUB_CHAR_OCPM:
+		dev_dbg(hub_dev, "no over-current protection\n");
+		break;
+	}
+
+	spin_lock_init(&hub->tt.lock);
+	INIT_LIST_HEAD(&hub->tt.clear_list);
+	INIT_WORK(&hub->tt.clear_work, hub_tt_work);
+	switch (hdev->descriptor.bDeviceProtocol) {
+	case USB_HUB_PR_FS:
+		break;
+	case USB_HUB_PR_HS_SINGLE_TT:
+		dev_dbg(hub_dev, "Single TT\n");
+		hub->tt.hub = hdev;
+		break;
+	case USB_HUB_PR_HS_MULTI_TT:
+		ret = usb_set_interface(hdev, 0, 1);
+		if (ret == 0) {
+			dev_dbg(hub_dev, "TT per port\n");
+			hub->tt.multi = 1;
+		} else
+			dev_err(hub_dev, "Using single TT (err %d)\n",
+				ret);
+		hub->tt.hub = hdev;
+		break;
+	case USB_HUB_PR_SS:
+		/* USB 3.0 hubs don't have a TT */
+		break;
+	default:
+		dev_dbg(hub_dev, "Unrecognized hub protocol %d\n",
+			hdev->descriptor.bDeviceProtocol);
+		break;
+	}
+
+	/* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
+	switch (wHubCharacteristics & HUB_CHAR_TTTT) {
+	case HUB_TTTT_8_BITS:
+		if (hdev->descriptor.bDeviceProtocol != 0) {
+			hub->tt.think_time = 666;
+			dev_dbg(hub_dev, "TT requires at most %d "
+					"FS bit times (%d ns)\n",
+				8, hub->tt.think_time);
+		}
+		break;
+	case HUB_TTTT_16_BITS:
+		hub->tt.think_time = 666 * 2;
+		dev_dbg(hub_dev, "TT requires at most %d "
+				"FS bit times (%d ns)\n",
+			16, hub->tt.think_time);
+		break;
+	case HUB_TTTT_24_BITS:
+		hub->tt.think_time = 666 * 3;
+		dev_dbg(hub_dev, "TT requires at most %d "
+				"FS bit times (%d ns)\n",
+			24, hub->tt.think_time);
+		break;
+	case HUB_TTTT_32_BITS:
+		hub->tt.think_time = 666 * 4;
+		dev_dbg(hub_dev, "TT requires at most %d "
+				"FS bit times (%d ns)\n",
+			32, hub->tt.think_time);
+		break;
+	}
+
+	/* probe() zeroes hub->indicator[] */
+	if (wHubCharacteristics & HUB_CHAR_PORTIND) {
+		hub->has_indicators = 1;
+		dev_dbg(hub_dev, "Port indicators are supported\n");
+	}
+
+	dev_dbg(hub_dev, "power on to power good time: %dms\n",
+		hub->descriptor->bPwrOn2PwrGood * 2);
+
+	/* power budgeting mostly matters with bus-powered hubs,
+	 * and battery-powered root hubs (may provide just 8 mA).
+	 */
+	ret = usb_get_std_status(hdev, USB_RECIP_DEVICE, 0, &hubstatus);
+	if (ret) {
+		message = "can't get hub status";
+		goto fail;
+	}
+	hcd = bus_to_hcd(hdev->bus);
+	if (hdev == hdev->bus->root_hub) {
+		if (hcd->power_budget > 0)
+			hdev->bus_mA = hcd->power_budget;
+		else
+			hdev->bus_mA = full_load * maxchild;
+		if (hdev->bus_mA >= full_load)
+			hub->mA_per_port = full_load;
+		else {
+			hub->mA_per_port = hdev->bus_mA;
+			hub->limited_power = 1;
+		}
+	} else if ((hubstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
+		int remaining = hdev->bus_mA -
+			hub->descriptor->bHubContrCurrent;
+
+		dev_dbg(hub_dev, "hub controller current requirement: %dmA\n",
+			hub->descriptor->bHubContrCurrent);
+		hub->limited_power = 1;
+
+		if (remaining < maxchild * unit_load)
+			dev_warn(hub_dev,
+					"insufficient power available "
+					"to use all downstream ports\n");
+		hub->mA_per_port = unit_load;	/* 7.2.1 */
+
+	} else {	/* Self-powered external hub */
+		/* FIXME: What about battery-powered external hubs that
+		 * provide less current per port? */
+		hub->mA_per_port = full_load;
+	}
+	if (hub->mA_per_port < full_load)
+		dev_dbg(hub_dev, "%umA bus power budget for each child\n",
+				hub->mA_per_port);
+
+	ret = hub_hub_status(hub, &hubstatus, &hubchange);
+	if (ret < 0) {
+		message = "can't get hub status";
+		goto fail;
+	}
+
+	/* local power status reports aren't always correct */
+	if (hdev->actconfig->desc.bmAttributes & USB_CONFIG_ATT_SELFPOWER)
+		dev_dbg(hub_dev, "local power source is %s\n",
+			(hubstatus & HUB_STATUS_LOCAL_POWER)
+			? "lost (inactive)" : "good");
+
+	if ((wHubCharacteristics & HUB_CHAR_OCPM) == 0)
+		dev_dbg(hub_dev, "%sover-current condition exists\n",
+			(hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no ");
+
+	/* set up the interrupt endpoint
+	 * We use the EP's maxpacket size instead of (PORTS+1+7)/8
+	 * bytes as USB2.0[11.12.3] says because some hubs are known
+	 * to send more data (and thus cause overflow). For root hubs,
+	 * maxpktsize is defined in hcd.c's fake endpoint descriptors
+	 * to be big enough for at least USB_MAXCHILDREN ports. */
+	pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress);
+	maxp = usb_maxpacket(hdev, pipe);
+
+	if (maxp > sizeof(*hub->buffer))
+		maxp = sizeof(*hub->buffer);
+
+	hub->urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!hub->urb) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	usb_fill_int_urb(hub->urb, hdev, pipe, *hub->buffer, maxp, hub_irq,
+		hub, endpoint->bInterval);
+
+	/* maybe cycle the hub leds */
+	if (hub->has_indicators && blinkenlights)
+		hub->indicator[0] = INDICATOR_CYCLE;
+
+	mutex_lock(&usb_port_peer_mutex);
+	for (i = 0; i < maxchild; i++) {
+		ret = usb_hub_create_port_device(hub, i + 1);
+		if (ret < 0) {
+			dev_err(hub->intfdev,
+				"couldn't create port%d device.\n", i + 1);
+			break;
+		}
+	}
+	hdev->maxchild = i;
+	for (i = 0; i < hdev->maxchild; i++) {
+		struct usb_port *port_dev = hub->ports[i];
+
+		pm_runtime_put(&port_dev->dev);
+	}
+
+	mutex_unlock(&usb_port_peer_mutex);
+	if (ret < 0)
+		goto fail;
+
+	/* Update the HCD's internal representation of this hub before hub_wq
+	 * starts getting port status changes for devices under the hub.
+	 */
+	if (hcd->driver->update_hub_device) {
+		ret = hcd->driver->update_hub_device(hcd, hdev,
+				&hub->tt, GFP_KERNEL);
+		if (ret < 0) {
+			message = "can't update HCD hub info";
+			goto fail;
+		}
+	}
+
+	usb_hub_adjust_deviceremovable(hdev, hub->descriptor);
+
+	hub_activate(hub, HUB_INIT);
+	return 0;
+
+fail:
+	dev_err(hub_dev, "config failed, %s (err %d)\n",
+			message, ret);
+	/* hub_disconnect() frees urb and descriptor */
+	return ret;
+}
+
+static void hub_release(struct kref *kref)
+{
+	struct usb_hub *hub = container_of(kref, struct usb_hub, kref);
+
+	usb_put_dev(hub->hdev);
+	usb_put_intf(to_usb_interface(hub->intfdev));
+	kfree(hub);
+}
+
+static unsigned highspeed_hubs;
+
+static void hub_disconnect(struct usb_interface *intf)
+{
+	struct usb_hub *hub = usb_get_intfdata(intf);
+	struct usb_device *hdev = interface_to_usbdev(intf);
+	int port1;
+
+	/*
+	 * Stop adding new hub events. We do not want to block here and thus
+	 * will not try to remove any pending work item.
+	 */
+	hub->disconnected = 1;
+
+	/* Disconnect all children and quiesce the hub */
+	hub->error = 0;
+	hub_quiesce(hub, HUB_DISCONNECT);
+
+	mutex_lock(&usb_port_peer_mutex);
+
+	/* Avoid races with recursively_mark_NOTATTACHED() */
+	spin_lock_irq(&device_state_lock);
+	port1 = hdev->maxchild;
+	hdev->maxchild = 0;
+	usb_set_intfdata(intf, NULL);
+	spin_unlock_irq(&device_state_lock);
+
+	for (; port1 > 0; --port1)
+		usb_hub_remove_port_device(hub, port1);
+
+	mutex_unlock(&usb_port_peer_mutex);
+
+	if (hub->hdev->speed == USB_SPEED_HIGH)
+		highspeed_hubs--;
+
+	usb_free_urb(hub->urb);
+	kfree(hub->ports);
+	kfree(hub->descriptor);
+	kfree(hub->status);
+	kfree(hub->buffer);
+
+	pm_suspend_ignore_children(&intf->dev, false);
+
+	if (hub->quirk_disable_autosuspend)
+		usb_autopm_put_interface(intf);
+
+	onboard_hub_destroy_pdevs(&hub->onboard_hub_devs);
+
+	kref_put(&hub->kref, hub_release);
+}
+
+static bool hub_descriptor_is_sane(struct usb_host_interface *desc)
+{
+	/* Some hubs have a subclass of 1, which AFAICT according to the */
+	/*  specs is not defined, but it works */
+	if (desc->desc.bInterfaceSubClass != 0 &&
+	    desc->desc.bInterfaceSubClass != 1)
+		return false;
+
+	/* Multiple endpoints? What kind of mutant ninja-hub is this? */
+	if (desc->desc.bNumEndpoints != 1)
+		return false;
+
+	/* If the first endpoint is not interrupt IN, we'd better punt! */
+	if (!usb_endpoint_is_int_in(&desc->endpoint[0].desc))
+		return false;
+
+        return true;
+}
+
+static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_host_interface *desc;
+	struct usb_device *hdev;
+	struct usb_hub *hub;
+
+	desc = intf->cur_altsetting;
+	hdev = interface_to_usbdev(intf);
+
+	/*
+	 * Set default autosuspend delay as 0 to speedup bus suspend,
+	 * based on the below considerations:
+	 *
+	 * - Unlike other drivers, the hub driver does not rely on the
+	 *   autosuspend delay to provide enough time to handle a wakeup
+	 *   event, and the submitted status URB is just to check future
+	 *   change on hub downstream ports, so it is safe to do it.
+	 *
+	 * - The patch might cause one or more auto supend/resume for
+	 *   below very rare devices when they are plugged into hub
+	 *   first time:
+	 *
+	 *   	devices having trouble initializing, and disconnect
+	 *   	themselves from the bus and then reconnect a second
+	 *   	or so later
+	 *
+	 *   	devices just for downloading firmware, and disconnects
+	 *   	themselves after completing it
+	 *
+	 *   For these quite rare devices, their drivers may change the
+	 *   autosuspend delay of their parent hub in the probe() to one
+	 *   appropriate value to avoid the subtle problem if someone
+	 *   does care it.
+	 *
+	 * - The patch may cause one or more auto suspend/resume on
+	 *   hub during running 'lsusb', but it is probably too
+	 *   infrequent to worry about.
+	 *
+	 * - Change autosuspend delay of hub can avoid unnecessary auto
+	 *   suspend timer for hub, also may decrease power consumption
+	 *   of USB bus.
+	 *
+	 * - If user has indicated to prevent autosuspend by passing
+	 *   usbcore.autosuspend = -1 then keep autosuspend disabled.
+	 */
+#ifdef CONFIG_PM
+	if (hdev->dev.power.autosuspend_delay >= 0)
+		pm_runtime_set_autosuspend_delay(&hdev->dev, 0);
+#endif
+
+	/*
+	 * Hubs have proper suspend/resume support, except for root hubs
+	 * where the controller driver doesn't have bus_suspend and
+	 * bus_resume methods.
+	 */
+	if (hdev->parent) {		/* normal device */
+		usb_enable_autosuspend(hdev);
+	} else {			/* root hub */
+		const struct hc_driver *drv = bus_to_hcd(hdev->bus)->driver;
+
+		if (drv->bus_suspend && drv->bus_resume)
+			usb_enable_autosuspend(hdev);
+	}
+
+	if (hdev->level == MAX_TOPO_LEVEL) {
+		dev_err(&intf->dev,
+			"Unsupported bus topology: hub nested too deep\n");
+		return -E2BIG;
+	}
+
+#ifdef	CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB
+	if (hdev->parent) {
+		dev_warn(&intf->dev, "ignoring external hub\n");
+		return -ENODEV;
+	}
+#endif
+
+	if (!hub_descriptor_is_sane(desc)) {
+		dev_err(&intf->dev, "bad descriptor, ignoring hub\n");
+		return -EIO;
+	}
+
+	/* We found a hub */
+	dev_info(&intf->dev, "USB hub found\n");
+
+	hub = kzalloc(sizeof(*hub), GFP_KERNEL);
+	if (!hub)
+		return -ENOMEM;
+
+	kref_init(&hub->kref);
+	hub->intfdev = &intf->dev;
+	hub->hdev = hdev;
+	INIT_DELAYED_WORK(&hub->leds, led_work);
+	INIT_DELAYED_WORK(&hub->init_work, NULL);
+	INIT_WORK(&hub->events, hub_event);
+	INIT_LIST_HEAD(&hub->onboard_hub_devs);
+	spin_lock_init(&hub->irq_urb_lock);
+	timer_setup(&hub->irq_urb_retry, hub_retry_irq_urb, 0);
+	usb_get_intf(intf);
+	usb_get_dev(hdev);
+
+	usb_set_intfdata(intf, hub);
+	intf->needs_remote_wakeup = 1;
+	pm_suspend_ignore_children(&intf->dev, true);
+
+	if (hdev->speed == USB_SPEED_HIGH)
+		highspeed_hubs++;
+
+	if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND)
+		hub->quirk_check_port_auto_suspend = 1;
+
+	if (id->driver_info & HUB_QUIRK_DISABLE_AUTOSUSPEND) {
+		hub->quirk_disable_autosuspend = 1;
+		usb_autopm_get_interface_no_resume(intf);
+	}
+
+	if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) {
+		onboard_hub_create_pdevs(hdev, &hub->onboard_hub_devs);
+
+		return 0;
+	}
+
+	hub_disconnect(intf);
+	return -ENODEV;
+}
+
+static int
+hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data)
+{
+	struct usb_device *hdev = interface_to_usbdev(intf);
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+
+	/* assert ifno == 0 (part of hub spec) */
+	switch (code) {
+	case USBDEVFS_HUB_PORTINFO: {
+		struct usbdevfs_hub_portinfo *info = user_data;
+		int i;
+
+		spin_lock_irq(&device_state_lock);
+		if (hdev->devnum <= 0)
+			info->nports = 0;
+		else {
+			info->nports = hdev->maxchild;
+			for (i = 0; i < info->nports; i++) {
+				if (hub->ports[i]->child == NULL)
+					info->port[i] = 0;
+				else
+					info->port[i] =
+						hub->ports[i]->child->devnum;
+			}
+		}
+		spin_unlock_irq(&device_state_lock);
+
+		return info->nports + 1;
+		}
+
+	default:
+		return -ENOSYS;
+	}
+}
+
+/*
+ * Allow user programs to claim ports on a hub.  When a device is attached
+ * to one of these "claimed" ports, the program will "own" the device.
+ */
+static int find_port_owner(struct usb_device *hdev, unsigned port1,
+		struct usb_dev_state ***ppowner)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+
+	if (hdev->state == USB_STATE_NOTATTACHED)
+		return -ENODEV;
+	if (port1 == 0 || port1 > hdev->maxchild)
+		return -EINVAL;
+
+	/* Devices not managed by the hub driver
+	 * will always have maxchild equal to 0.
+	 */
+	*ppowner = &(hub->ports[port1 - 1]->port_owner);
+	return 0;
+}
+
+/* In the following three functions, the caller must hold hdev's lock */
+int usb_hub_claim_port(struct usb_device *hdev, unsigned port1,
+		       struct usb_dev_state *owner)
+{
+	int rc;
+	struct usb_dev_state **powner;
+
+	rc = find_port_owner(hdev, port1, &powner);
+	if (rc)
+		return rc;
+	if (*powner)
+		return -EBUSY;
+	*powner = owner;
+	return rc;
+}
+EXPORT_SYMBOL_GPL(usb_hub_claim_port);
+
+int usb_hub_release_port(struct usb_device *hdev, unsigned port1,
+			 struct usb_dev_state *owner)
+{
+	int rc;
+	struct usb_dev_state **powner;
+
+	rc = find_port_owner(hdev, port1, &powner);
+	if (rc)
+		return rc;
+	if (*powner != owner)
+		return -ENOENT;
+	*powner = NULL;
+	return rc;
+}
+EXPORT_SYMBOL_GPL(usb_hub_release_port);
+
+void usb_hub_release_all_ports(struct usb_device *hdev, struct usb_dev_state *owner)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+	int n;
+
+	for (n = 0; n < hdev->maxchild; n++) {
+		if (hub->ports[n]->port_owner == owner)
+			hub->ports[n]->port_owner = NULL;
+	}
+
+}
+
+/* The caller must hold udev's lock */
+bool usb_device_is_owned(struct usb_device *udev)
+{
+	struct usb_hub *hub;
+
+	if (udev->state == USB_STATE_NOTATTACHED || !udev->parent)
+		return false;
+	hub = usb_hub_to_struct_hub(udev->parent);
+	return !!hub->ports[udev->portnum - 1]->port_owner;
+}
+
+static void recursively_mark_NOTATTACHED(struct usb_device *udev)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(udev);
+	int i;
+
+	for (i = 0; i < udev->maxchild; ++i) {
+		if (hub->ports[i]->child)
+			recursively_mark_NOTATTACHED(hub->ports[i]->child);
+	}
+	if (udev->state == USB_STATE_SUSPENDED)
+		udev->active_duration -= jiffies;
+	udev->state = USB_STATE_NOTATTACHED;
+}
+
+/**
+ * usb_set_device_state - change a device's current state (usbcore, hcds)
+ * @udev: pointer to device whose state should be changed
+ * @new_state: new state value to be stored
+ *
+ * udev->state is _not_ fully protected by the device lock.  Although
+ * most transitions are made only while holding the lock, the state can
+ * can change to USB_STATE_NOTATTACHED at almost any time.  This
+ * is so that devices can be marked as disconnected as soon as possible,
+ * without having to wait for any semaphores to be released.  As a result,
+ * all changes to any device's state must be protected by the
+ * device_state_lock spinlock.
+ *
+ * Once a device has been added to the device tree, all changes to its state
+ * should be made using this routine.  The state should _not_ be set directly.
+ *
+ * If udev->state is already USB_STATE_NOTATTACHED then no change is made.
+ * Otherwise udev->state is set to new_state, and if new_state is
+ * USB_STATE_NOTATTACHED then all of udev's descendants' states are also set
+ * to USB_STATE_NOTATTACHED.
+ */
+void usb_set_device_state(struct usb_device *udev,
+		enum usb_device_state new_state)
+{
+	unsigned long flags;
+	int wakeup = -1;
+
+	spin_lock_irqsave(&device_state_lock, flags);
+	if (udev->state == USB_STATE_NOTATTACHED)
+		;	/* do nothing */
+	else if (new_state != USB_STATE_NOTATTACHED) {
+
+		/* root hub wakeup capabilities are managed out-of-band
+		 * and may involve silicon errata ... ignore them here.
+		 */
+		if (udev->parent) {
+			if (udev->state == USB_STATE_SUSPENDED
+					|| new_state == USB_STATE_SUSPENDED)
+				;	/* No change to wakeup settings */
+			else if (new_state == USB_STATE_CONFIGURED)
+				wakeup = (udev->quirks &
+					USB_QUIRK_IGNORE_REMOTE_WAKEUP) ? 0 :
+					udev->actconfig->desc.bmAttributes &
+					USB_CONFIG_ATT_WAKEUP;
+			else
+				wakeup = 0;
+		}
+		if (udev->state == USB_STATE_SUSPENDED &&
+			new_state != USB_STATE_SUSPENDED)
+			udev->active_duration -= jiffies;
+		else if (new_state == USB_STATE_SUSPENDED &&
+				udev->state != USB_STATE_SUSPENDED)
+			udev->active_duration += jiffies;
+		udev->state = new_state;
+	} else
+		recursively_mark_NOTATTACHED(udev);
+	spin_unlock_irqrestore(&device_state_lock, flags);
+	if (wakeup >= 0)
+		device_set_wakeup_capable(&udev->dev, wakeup);
+}
+EXPORT_SYMBOL_GPL(usb_set_device_state);
+
+/*
+ * Choose a device number.
+ *
+ * Device numbers are used as filenames in usbfs.  On USB-1.1 and
+ * USB-2.0 buses they are also used as device addresses, however on
+ * USB-3.0 buses the address is assigned by the controller hardware
+ * and it usually is not the same as the device number.
+ *
+ * WUSB devices are simple: they have no hubs behind, so the mapping
+ * device <-> virtual port number becomes 1:1. Why? to simplify the
+ * life of the device connection logic in
+ * drivers/usb/wusbcore/devconnect.c. When we do the initial secret
+ * handshake we need to assign a temporary address in the unauthorized
+ * space. For simplicity we use the first virtual port number found to
+ * be free [drivers/usb/wusbcore/devconnect.c:wusbhc_devconnect_ack()]
+ * and that becomes it's address [X < 128] or its unauthorized address
+ * [X | 0x80].
+ *
+ * We add 1 as an offset to the one-based USB-stack port number
+ * (zero-based wusb virtual port index) for two reasons: (a) dev addr
+ * 0 is reserved by USB for default address; (b) Linux's USB stack
+ * uses always #1 for the root hub of the controller. So USB stack's
+ * port #1, which is wusb virtual-port #0 has address #2.
+ *
+ * Devices connected under xHCI are not as simple.  The host controller
+ * supports virtualization, so the hardware assigns device addresses and
+ * the HCD must setup data structures before issuing a set address
+ * command to the hardware.
+ */
+static void choose_devnum(struct usb_device *udev)
+{
+	int		devnum;
+	struct usb_bus	*bus = udev->bus;
+
+	/* be safe when more hub events are proceed in parallel */
+	mutex_lock(&bus->devnum_next_mutex);
+	if (udev->wusb) {
+		devnum = udev->portnum + 1;
+		BUG_ON(test_bit(devnum, bus->devmap.devicemap));
+	} else {
+		/* Try to allocate the next devnum beginning at
+		 * bus->devnum_next. */
+		devnum = find_next_zero_bit(bus->devmap.devicemap, 128,
+					    bus->devnum_next);
+		if (devnum >= 128)
+			devnum = find_next_zero_bit(bus->devmap.devicemap,
+						    128, 1);
+		bus->devnum_next = (devnum >= 127 ? 1 : devnum + 1);
+	}
+	if (devnum < 128) {
+		set_bit(devnum, bus->devmap.devicemap);
+		udev->devnum = devnum;
+	}
+	mutex_unlock(&bus->devnum_next_mutex);
+}
+
+static void release_devnum(struct usb_device *udev)
+{
+	if (udev->devnum > 0) {
+		clear_bit(udev->devnum, udev->bus->devmap.devicemap);
+		udev->devnum = -1;
+	}
+}
+
+static void update_devnum(struct usb_device *udev, int devnum)
+{
+	/* The address for a WUSB device is managed by wusbcore. */
+	if (!udev->wusb)
+		udev->devnum = devnum;
+	if (!udev->devaddr)
+		udev->devaddr = (u8)devnum;
+}
+
+static void hub_free_dev(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	/* Root hubs aren't real devices, so don't free HCD resources */
+	if (hcd->driver->free_dev && udev->parent)
+		hcd->driver->free_dev(hcd, udev);
+}
+
+static void hub_disconnect_children(struct usb_device *udev)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(udev);
+	int i;
+
+	/* Free up all the children before we remove this device */
+	for (i = 0; i < udev->maxchild; i++) {
+		if (hub->ports[i]->child)
+			usb_disconnect(&hub->ports[i]->child);
+	}
+}
+
+/**
+ * usb_disconnect - disconnect a device (usbcore-internal)
+ * @pdev: pointer to device being disconnected
+ *
+ * Context: task context, might sleep
+ *
+ * Something got disconnected. Get rid of it and all of its children.
+ *
+ * If *pdev is a normal device then the parent hub must already be locked.
+ * If *pdev is a root hub then the caller must hold the usb_bus_idr_lock,
+ * which protects the set of root hubs as well as the list of buses.
+ *
+ * Only hub drivers (including virtual root hub drivers for host
+ * controllers) should ever call this.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ */
+void usb_disconnect(struct usb_device **pdev)
+{
+	struct usb_port *port_dev = NULL;
+	struct usb_device *udev = *pdev;
+	struct usb_hub *hub = NULL;
+	int port1 = 1;
+
+	/* mark the device as inactive, so any further urb submissions for
+	 * this device (and any of its children) will fail immediately.
+	 * this quiesces everything except pending urbs.
+	 */
+	usb_set_device_state(udev, USB_STATE_NOTATTACHED);
+	dev_info(&udev->dev, "USB disconnect, device number %d\n",
+			udev->devnum);
+
+	/*
+	 * Ensure that the pm runtime code knows that the USB device
+	 * is in the process of being disconnected.
+	 */
+	pm_runtime_barrier(&udev->dev);
+
+	usb_lock_device(udev);
+
+	hub_disconnect_children(udev);
+
+	/* deallocate hcd/hardware state ... nuking all pending urbs and
+	 * cleaning up all state associated with the current configuration
+	 * so that the hardware is now fully quiesced.
+	 */
+	dev_dbg(&udev->dev, "unregistering device\n");
+	usb_disable_device(udev, 0);
+	usb_hcd_synchronize_unlinks(udev);
+
+	if (udev->parent) {
+		port1 = udev->portnum;
+		hub = usb_hub_to_struct_hub(udev->parent);
+		port_dev = hub->ports[port1 - 1];
+
+		sysfs_remove_link(&udev->dev.kobj, "port");
+		sysfs_remove_link(&port_dev->dev.kobj, "device");
+
+		/*
+		 * As usb_port_runtime_resume() de-references udev, make
+		 * sure no resumes occur during removal
+		 */
+		if (!test_and_set_bit(port1, hub->child_usage_bits))
+			pm_runtime_get_sync(&port_dev->dev);
+	}
+
+	usb_remove_ep_devs(&udev->ep0);
+	usb_unlock_device(udev);
+
+	/* Unregister the device.  The device driver is responsible
+	 * for de-configuring the device and invoking the remove-device
+	 * notifier chain (used by usbfs and possibly others).
+	 */
+	device_del(&udev->dev);
+
+	/* Free the device number and delete the parent's children[]
+	 * (or root_hub) pointer.
+	 */
+	release_devnum(udev);
+
+	/* Avoid races with recursively_mark_NOTATTACHED() */
+	spin_lock_irq(&device_state_lock);
+	*pdev = NULL;
+	spin_unlock_irq(&device_state_lock);
+
+	if (port_dev && test_and_clear_bit(port1, hub->child_usage_bits))
+		pm_runtime_put(&port_dev->dev);
+
+	hub_free_dev(udev);
+
+	put_device(&udev->dev);
+}
+
+#ifdef CONFIG_USB_ANNOUNCE_NEW_DEVICES
+static void show_string(struct usb_device *udev, char *id, char *string)
+{
+	if (!string)
+		return;
+	dev_info(&udev->dev, "%s: %s\n", id, string);
+}
+
+static void announce_device(struct usb_device *udev)
+{
+	u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);
+
+	dev_info(&udev->dev,
+		"New USB device found, idVendor=%04x, idProduct=%04x, bcdDevice=%2x.%02x\n",
+		le16_to_cpu(udev->descriptor.idVendor),
+		le16_to_cpu(udev->descriptor.idProduct),
+		bcdDevice >> 8, bcdDevice & 0xff);
+	dev_info(&udev->dev,
+		"New USB device strings: Mfr=%d, Product=%d, SerialNumber=%d\n",
+		udev->descriptor.iManufacturer,
+		udev->descriptor.iProduct,
+		udev->descriptor.iSerialNumber);
+	show_string(udev, "Product", udev->product);
+	show_string(udev, "Manufacturer", udev->manufacturer);
+	show_string(udev, "SerialNumber", udev->serial);
+}
+#else
+static inline void announce_device(struct usb_device *udev) { }
+#endif
+
+
+/**
+ * usb_enumerate_device_otg - FIXME (usbcore-internal)
+ * @udev: newly addressed device (in ADDRESS state)
+ *
+ * Finish enumeration for On-The-Go devices
+ *
+ * Return: 0 if successful. A negative error code otherwise.
+ */
+static int usb_enumerate_device_otg(struct usb_device *udev)
+{
+	int err = 0;
+
+#ifdef	CONFIG_USB_OTG
+	/*
+	 * OTG-aware devices on OTG-capable root hubs may be able to use SRP,
+	 * to wake us after we've powered off VBUS; and HNP, switching roles
+	 * "host" to "peripheral".  The OTG descriptor helps figure this out.
+	 */
+	if (!udev->bus->is_b_host
+			&& udev->config
+			&& udev->parent == udev->bus->root_hub) {
+		struct usb_otg_descriptor	*desc = NULL;
+		struct usb_bus			*bus = udev->bus;
+		unsigned			port1 = udev->portnum;
+
+		/* descriptor may appear anywhere in config */
+		err = __usb_get_extra_descriptor(udev->rawdescriptors[0],
+				le16_to_cpu(udev->config[0].desc.wTotalLength),
+				USB_DT_OTG, (void **) &desc, sizeof(*desc));
+		if (err || !(desc->bmAttributes & USB_OTG_HNP))
+			return 0;
+
+		dev_info(&udev->dev, "Dual-Role OTG device on %sHNP port\n",
+					(port1 == bus->otg_port) ? "" : "non-");
+
+		/* enable HNP before suspend, it's simpler */
+		if (port1 == bus->otg_port) {
+			bus->b_hnp_enable = 1;
+			err = usb_control_msg(udev,
+				usb_sndctrlpipe(udev, 0),
+				USB_REQ_SET_FEATURE, 0,
+				USB_DEVICE_B_HNP_ENABLE,
+				0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+			if (err < 0) {
+				/*
+				 * OTG MESSAGE: report errors here,
+				 * customize to match your product.
+				 */
+				dev_err(&udev->dev, "can't set HNP mode: %d\n",
+									err);
+				bus->b_hnp_enable = 0;
+			}
+		} else if (desc->bLength == sizeof
+				(struct usb_otg_descriptor)) {
+			/* Set a_alt_hnp_support for legacy otg device */
+			err = usb_control_msg(udev,
+				usb_sndctrlpipe(udev, 0),
+				USB_REQ_SET_FEATURE, 0,
+				USB_DEVICE_A_ALT_HNP_SUPPORT,
+				0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+			if (err < 0)
+				dev_err(&udev->dev,
+					"set a_alt_hnp_support failed: %d\n",
+					err);
+		}
+	}
+#endif
+	return err;
+}
+
+
+/**
+ * usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal)
+ * @udev: newly addressed device (in ADDRESS state)
+ *
+ * This is only called by usb_new_device() -- all comments that apply there
+ * apply here wrt to environment.
+ *
+ * If the device is WUSB and not authorized, we don't attempt to read
+ * the string descriptors, as they will be errored out by the device
+ * until it has been authorized.
+ *
+ * Return: 0 if successful. A negative error code otherwise.
+ */
+static int usb_enumerate_device(struct usb_device *udev)
+{
+	int err;
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	if (udev->config == NULL) {
+		err = usb_get_configuration(udev);
+		if (err < 0) {
+			if (err != -ENODEV)
+				dev_err(&udev->dev, "can't read configurations, error %d\n",
+						err);
+			return err;
+		}
+	}
+
+	/* read the standard strings and cache them if present */
+	udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
+	udev->manufacturer = usb_cache_string(udev,
+					      udev->descriptor.iManufacturer);
+	udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
+
+	err = usb_enumerate_device_otg(udev);
+	if (err < 0)
+		return err;
+
+	if (IS_ENABLED(CONFIG_USB_OTG_PRODUCTLIST) && hcd->tpl_support &&
+		!is_targeted(udev)) {
+		/* Maybe it can talk to us, though we can't talk to it.
+		 * (Includes HNP test device.)
+		 */
+		if (IS_ENABLED(CONFIG_USB_OTG) && (udev->bus->b_hnp_enable
+			|| udev->bus->is_b_host)) {
+			err = usb_port_suspend(udev, PMSG_AUTO_SUSPEND);
+			if (err < 0)
+				dev_dbg(&udev->dev, "HNP fail, %d\n", err);
+		}
+		return -ENOTSUPP;
+	}
+
+	usb_detect_interface_quirks(udev);
+
+	return 0;
+}
+
+static void set_usb_port_removable(struct usb_device *udev)
+{
+	struct usb_device *hdev = udev->parent;
+	struct usb_hub *hub;
+	u8 port = udev->portnum;
+	u16 wHubCharacteristics;
+	bool removable = true;
+
+	dev_set_removable(&udev->dev, DEVICE_REMOVABLE_UNKNOWN);
+
+	if (!hdev)
+		return;
+
+	hub = usb_hub_to_struct_hub(udev->parent);
+
+	/*
+	 * If the platform firmware has provided information about a port,
+	 * use that to determine whether it's removable.
+	 */
+	switch (hub->ports[udev->portnum - 1]->connect_type) {
+	case USB_PORT_CONNECT_TYPE_HOT_PLUG:
+		dev_set_removable(&udev->dev, DEVICE_REMOVABLE);
+		return;
+	case USB_PORT_CONNECT_TYPE_HARD_WIRED:
+	case USB_PORT_NOT_USED:
+		dev_set_removable(&udev->dev, DEVICE_FIXED);
+		return;
+	default:
+		break;
+	}
+
+	/*
+	 * Otherwise, check whether the hub knows whether a port is removable
+	 * or not
+	 */
+	wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
+
+	if (!(wHubCharacteristics & HUB_CHAR_COMPOUND))
+		return;
+
+	if (hub_is_superspeed(hdev)) {
+		if (le16_to_cpu(hub->descriptor->u.ss.DeviceRemovable)
+				& (1 << port))
+			removable = false;
+	} else {
+		if (hub->descriptor->u.hs.DeviceRemovable[port / 8] & (1 << (port % 8)))
+			removable = false;
+	}
+
+	if (removable)
+		dev_set_removable(&udev->dev, DEVICE_REMOVABLE);
+	else
+		dev_set_removable(&udev->dev, DEVICE_FIXED);
+
+}
+
+/**
+ * usb_new_device - perform initial device setup (usbcore-internal)
+ * @udev: newly addressed device (in ADDRESS state)
+ *
+ * This is called with devices which have been detected but not fully
+ * enumerated.  The device descriptor is available, but not descriptors
+ * for any device configuration.  The caller must have locked either
+ * the parent hub (if udev is a normal device) or else the
+ * usb_bus_idr_lock (if udev is a root hub).  The parent's pointer to
+ * udev has already been installed, but udev is not yet visible through
+ * sysfs or other filesystem code.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Only the hub driver or root-hub registrar should ever call this.
+ *
+ * Return: Whether the device is configured properly or not. Zero if the
+ * interface was registered with the driver core; else a negative errno
+ * value.
+ *
+ */
+int usb_new_device(struct usb_device *udev)
+{
+	int err;
+
+	if (udev->parent) {
+		/* Initialize non-root-hub device wakeup to disabled;
+		 * device (un)configuration controls wakeup capable
+		 * sysfs power/wakeup controls wakeup enabled/disabled
+		 */
+		device_init_wakeup(&udev->dev, 0);
+	}
+
+	/* Tell the runtime-PM framework the device is active */
+	pm_runtime_set_active(&udev->dev);
+	pm_runtime_get_noresume(&udev->dev);
+	pm_runtime_use_autosuspend(&udev->dev);
+	pm_runtime_enable(&udev->dev);
+
+	/* By default, forbid autosuspend for all devices.  It will be
+	 * allowed for hubs during binding.
+	 */
+	usb_disable_autosuspend(udev);
+
+	err = usb_enumerate_device(udev);	/* Read descriptors */
+	if (err < 0)
+		goto fail;
+	dev_dbg(&udev->dev, "udev %d, busnum %d, minor = %d\n",
+			udev->devnum, udev->bus->busnum,
+			(((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
+	/* export the usbdev device-node for libusb */
+	udev->dev.devt = MKDEV(USB_DEVICE_MAJOR,
+			(((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
+
+	/* Tell the world! */
+	announce_device(udev);
+
+	if (udev->serial)
+		add_device_randomness(udev->serial, strlen(udev->serial));
+	if (udev->product)
+		add_device_randomness(udev->product, strlen(udev->product));
+	if (udev->manufacturer)
+		add_device_randomness(udev->manufacturer,
+				      strlen(udev->manufacturer));
+
+	device_enable_async_suspend(&udev->dev);
+
+	/* check whether the hub or firmware marks this port as non-removable */
+	set_usb_port_removable(udev);
+
+	/* Register the device.  The device driver is responsible
+	 * for configuring the device and invoking the add-device
+	 * notifier chain (used by usbfs and possibly others).
+	 */
+	err = device_add(&udev->dev);
+	if (err) {
+		dev_err(&udev->dev, "can't device_add, error %d\n", err);
+		goto fail;
+	}
+
+	/* Create link files between child device and usb port device. */
+	if (udev->parent) {
+		struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
+		int port1 = udev->portnum;
+		struct usb_port	*port_dev = hub->ports[port1 - 1];
+
+		err = sysfs_create_link(&udev->dev.kobj,
+				&port_dev->dev.kobj, "port");
+		if (err)
+			goto fail;
+
+		err = sysfs_create_link(&port_dev->dev.kobj,
+				&udev->dev.kobj, "device");
+		if (err) {
+			sysfs_remove_link(&udev->dev.kobj, "port");
+			goto fail;
+		}
+
+		if (!test_and_set_bit(port1, hub->child_usage_bits))
+			pm_runtime_get_sync(&port_dev->dev);
+	}
+
+	(void) usb_create_ep_devs(&udev->dev, &udev->ep0, udev);
+	usb_mark_last_busy(udev);
+	pm_runtime_put_sync_autosuspend(&udev->dev);
+	return err;
+
+fail:
+	usb_set_device_state(udev, USB_STATE_NOTATTACHED);
+	pm_runtime_disable(&udev->dev);
+	pm_runtime_set_suspended(&udev->dev);
+	return err;
+}
+
+
+/**
+ * usb_deauthorize_device - deauthorize a device (usbcore-internal)
+ * @usb_dev: USB device
+ *
+ * Move the USB device to a very basic state where interfaces are disabled
+ * and the device is in fact unconfigured and unusable.
+ *
+ * We share a lock (that we have) with device_del(), so we need to
+ * defer its call.
+ *
+ * Return: 0.
+ */
+int usb_deauthorize_device(struct usb_device *usb_dev)
+{
+	usb_lock_device(usb_dev);
+	if (usb_dev->authorized == 0)
+		goto out_unauthorized;
+
+	usb_dev->authorized = 0;
+	usb_set_configuration(usb_dev, -1);
+
+out_unauthorized:
+	usb_unlock_device(usb_dev);
+	return 0;
+}
+
+
+int usb_authorize_device(struct usb_device *usb_dev)
+{
+	int result = 0, c;
+
+	usb_lock_device(usb_dev);
+	if (usb_dev->authorized == 1)
+		goto out_authorized;
+
+	result = usb_autoresume_device(usb_dev);
+	if (result < 0) {
+		dev_err(&usb_dev->dev,
+			"can't autoresume for authorization: %d\n", result);
+		goto error_autoresume;
+	}
+
+	if (usb_dev->wusb) {
+		struct usb_device_descriptor *descr;
+
+		descr = usb_get_device_descriptor(usb_dev);
+		if (IS_ERR(descr)) {
+			result = PTR_ERR(descr);
+			dev_err(&usb_dev->dev, "can't re-read device descriptor for "
+				"authorization: %d\n", result);
+			goto error_device_descriptor;
+		}
+		usb_dev->descriptor = *descr;
+		kfree(descr);
+	}
+
+	usb_dev->authorized = 1;
+	/* Choose and set the configuration.  This registers the interfaces
+	 * with the driver core and lets interface drivers bind to them.
+	 */
+	c = usb_choose_configuration(usb_dev);
+	if (c >= 0) {
+		result = usb_set_configuration(usb_dev, c);
+		if (result) {
+			dev_err(&usb_dev->dev,
+				"can't set config #%d, error %d\n", c, result);
+			/* This need not be fatal.  The user can try to
+			 * set other configurations. */
+		}
+	}
+	dev_info(&usb_dev->dev, "authorized to connect\n");
+
+error_device_descriptor:
+	usb_autosuspend_device(usb_dev);
+error_autoresume:
+out_authorized:
+	usb_unlock_device(usb_dev);	/* complements locktree */
+	return result;
+}
+
+/**
+ * get_port_ssp_rate - Match the extended port status to SSP rate
+ * @hdev: The hub device
+ * @ext_portstatus: extended port status
+ *
+ * Match the extended port status speed id to the SuperSpeed Plus sublink speed
+ * capability attributes. Base on the number of connected lanes and speed,
+ * return the corresponding enum usb_ssp_rate.
+ */
+static enum usb_ssp_rate get_port_ssp_rate(struct usb_device *hdev,
+					   u32 ext_portstatus)
+{
+	struct usb_ssp_cap_descriptor *ssp_cap;
+	u32 attr;
+	u8 speed_id;
+	u8 ssac;
+	u8 lanes;
+	int i;
+
+	if (!hdev->bos)
+		goto out;
+
+	ssp_cap = hdev->bos->ssp_cap;
+	if (!ssp_cap)
+		goto out;
+
+	speed_id = ext_portstatus & USB_EXT_PORT_STAT_RX_SPEED_ID;
+	lanes = USB_EXT_PORT_RX_LANES(ext_portstatus) + 1;
+
+	ssac = le32_to_cpu(ssp_cap->bmAttributes) &
+		USB_SSP_SUBLINK_SPEED_ATTRIBS;
+
+	for (i = 0; i <= ssac; i++) {
+		u8 ssid;
+
+		attr = le32_to_cpu(ssp_cap->bmSublinkSpeedAttr[i]);
+		ssid = FIELD_GET(USB_SSP_SUBLINK_SPEED_SSID, attr);
+		if (speed_id == ssid) {
+			u16 mantissa;
+			u8 lse;
+			u8 type;
+
+			/*
+			 * Note: currently asymmetric lane types are only
+			 * applicable for SSIC operate in SuperSpeed protocol
+			 */
+			type = FIELD_GET(USB_SSP_SUBLINK_SPEED_ST, attr);
+			if (type == USB_SSP_SUBLINK_SPEED_ST_ASYM_RX ||
+			    type == USB_SSP_SUBLINK_SPEED_ST_ASYM_TX)
+				goto out;
+
+			if (FIELD_GET(USB_SSP_SUBLINK_SPEED_LP, attr) !=
+			    USB_SSP_SUBLINK_SPEED_LP_SSP)
+				goto out;
+
+			lse = FIELD_GET(USB_SSP_SUBLINK_SPEED_LSE, attr);
+			mantissa = FIELD_GET(USB_SSP_SUBLINK_SPEED_LSM, attr);
+
+			/* Convert to Gbps */
+			for (; lse < USB_SSP_SUBLINK_SPEED_LSE_GBPS; lse++)
+				mantissa /= 1000;
+
+			if (mantissa >= 10 && lanes == 1)
+				return USB_SSP_GEN_2x1;
+
+			if (mantissa >= 10 && lanes == 2)
+				return USB_SSP_GEN_2x2;
+
+			if (mantissa >= 5 && lanes == 2)
+				return USB_SSP_GEN_1x2;
+
+			goto out;
+		}
+	}
+
+out:
+	return USB_SSP_GEN_UNKNOWN;
+}
+
+/* Returns 1 if @hub is a WUSB root hub, 0 otherwise */
+static unsigned hub_is_wusb(struct usb_hub *hub)
+{
+	struct usb_hcd *hcd;
+	if (hub->hdev->parent != NULL)  /* not a root hub? */
+		return 0;
+	hcd = bus_to_hcd(hub->hdev->bus);
+	return hcd->wireless;
+}
+
+
+#ifdef CONFIG_USB_FEW_INIT_RETRIES
+#define PORT_RESET_TRIES	2
+#define SET_ADDRESS_TRIES	1
+#define GET_DESCRIPTOR_TRIES	1
+#define GET_MAXPACKET0_TRIES	1
+#define PORT_INIT_TRIES		4
+
+#else
+#define PORT_RESET_TRIES	5
+#define SET_ADDRESS_TRIES	2
+#define GET_DESCRIPTOR_TRIES	2
+#define GET_MAXPACKET0_TRIES	3
+#define PORT_INIT_TRIES		4
+#endif	/* CONFIG_USB_FEW_INIT_RETRIES */
+
+#define DETECT_DISCONNECT_TRIES 5
+
+#define HUB_ROOT_RESET_TIME	60	/* times are in msec */
+#define HUB_SHORT_RESET_TIME	10
+#define HUB_BH_RESET_TIME	50
+#define HUB_LONG_RESET_TIME	200
+#define HUB_RESET_TIMEOUT	800
+
+static bool use_new_scheme(struct usb_device *udev, int retry,
+			   struct usb_port *port_dev)
+{
+	int old_scheme_first_port =
+		(port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME) ||
+		old_scheme_first;
+
+	/*
+	 * "New scheme" enumeration causes an extra state transition to be
+	 * exposed to an xhci host and causes USB3 devices to receive control
+	 * commands in the default state.  This has been seen to cause
+	 * enumeration failures, so disable this enumeration scheme for USB3
+	 * devices.
+	 */
+	if (udev->speed >= USB_SPEED_SUPER)
+		return false;
+
+	/*
+	 * If use_both_schemes is set, use the first scheme (whichever
+	 * it is) for the larger half of the retries, then use the other
+	 * scheme.  Otherwise, use the first scheme for all the retries.
+	 */
+	if (use_both_schemes && retry >= (PORT_INIT_TRIES + 1) / 2)
+		return old_scheme_first_port;	/* Second half */
+	return !old_scheme_first_port;		/* First half or all */
+}
+
+/* Is a USB 3.0 port in the Inactive or Compliance Mode state?
+ * Port warm reset is required to recover
+ */
+static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1,
+		u16 portstatus)
+{
+	u16 link_state;
+
+	if (!hub_is_superspeed(hub->hdev))
+		return false;
+
+	if (test_bit(port1, hub->warm_reset_bits))
+		return true;
+
+	link_state = portstatus & USB_PORT_STAT_LINK_STATE;
+	return link_state == USB_SS_PORT_LS_SS_INACTIVE
+		|| link_state == USB_SS_PORT_LS_COMP_MOD;
+}
+
+static int hub_port_wait_reset(struct usb_hub *hub, int port1,
+			struct usb_device *udev, unsigned int delay, bool warm)
+{
+	int delay_time, ret;
+	u16 portstatus;
+	u16 portchange;
+	u32 ext_portstatus = 0;
+
+	for (delay_time = 0;
+			delay_time < HUB_RESET_TIMEOUT;
+			delay_time += delay) {
+		/* wait to give the device a chance to reset */
+		msleep(delay);
+
+		/* read and decode port status */
+		if (hub_is_superspeedplus(hub->hdev))
+			ret = hub_ext_port_status(hub, port1,
+						  HUB_EXT_PORT_STATUS,
+						  &portstatus, &portchange,
+						  &ext_portstatus);
+		else
+			ret = usb_hub_port_status(hub, port1, &portstatus,
+					      &portchange);
+		if (ret < 0)
+			return ret;
+
+		/*
+		 * The port state is unknown until the reset completes.
+		 *
+		 * On top of that, some chips may require additional time
+		 * to re-establish a connection after the reset is complete,
+		 * so also wait for the connection to be re-established.
+		 */
+		if (!(portstatus & USB_PORT_STAT_RESET) &&
+		    (portstatus & USB_PORT_STAT_CONNECTION))
+			break;
+
+		/* switch to the long delay after two short delay failures */
+		if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
+			delay = HUB_LONG_RESET_TIME;
+
+		dev_dbg(&hub->ports[port1 - 1]->dev,
+				"not %sreset yet, waiting %dms\n",
+				warm ? "warm " : "", delay);
+	}
+
+	if ((portstatus & USB_PORT_STAT_RESET))
+		return -EBUSY;
+
+	if (hub_port_warm_reset_required(hub, port1, portstatus))
+		return -ENOTCONN;
+
+	/* Device went away? */
+	if (!(portstatus & USB_PORT_STAT_CONNECTION))
+		return -ENOTCONN;
+
+	/* Retry if connect change is set but status is still connected.
+	 * A USB 3.0 connection may bounce if multiple warm resets were issued,
+	 * but the device may have successfully re-connected. Ignore it.
+	 */
+	if (!hub_is_superspeed(hub->hdev) &&
+	    (portchange & USB_PORT_STAT_C_CONNECTION)) {
+		usb_clear_port_feature(hub->hdev, port1,
+				       USB_PORT_FEAT_C_CONNECTION);
+		return -EAGAIN;
+	}
+
+	if (!(portstatus & USB_PORT_STAT_ENABLE))
+		return -EBUSY;
+
+	if (!udev)
+		return 0;
+
+	if (hub_is_superspeedplus(hub->hdev)) {
+		/* extended portstatus Rx and Tx lane count are zero based */
+		udev->rx_lanes = USB_EXT_PORT_RX_LANES(ext_portstatus) + 1;
+		udev->tx_lanes = USB_EXT_PORT_TX_LANES(ext_portstatus) + 1;
+		udev->ssp_rate = get_port_ssp_rate(hub->hdev, ext_portstatus);
+	} else {
+		udev->rx_lanes = 1;
+		udev->tx_lanes = 1;
+		udev->ssp_rate = USB_SSP_GEN_UNKNOWN;
+	}
+	if (hub_is_wusb(hub))
+		udev->speed = USB_SPEED_WIRELESS;
+	else if (udev->ssp_rate != USB_SSP_GEN_UNKNOWN)
+		udev->speed = USB_SPEED_SUPER_PLUS;
+	else if (hub_is_superspeed(hub->hdev))
+		udev->speed = USB_SPEED_SUPER;
+	else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
+		udev->speed = USB_SPEED_HIGH;
+	else if (portstatus & USB_PORT_STAT_LOW_SPEED)
+		udev->speed = USB_SPEED_LOW;
+	else
+		udev->speed = USB_SPEED_FULL;
+	return 0;
+}
+
+/* Handle port reset and port warm(BH) reset (for USB3 protocol ports) */
+static int hub_port_reset(struct usb_hub *hub, int port1,
+			struct usb_device *udev, unsigned int delay, bool warm)
+{
+	int i, status;
+	u16 portchange, portstatus;
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	int reset_recovery_time;
+
+	if (!hub_is_superspeed(hub->hdev)) {
+		if (warm) {
+			dev_err(hub->intfdev, "only USB3 hub support "
+						"warm reset\n");
+			return -EINVAL;
+		}
+		/* Block EHCI CF initialization during the port reset.
+		 * Some companion controllers don't like it when they mix.
+		 */
+		down_read(&ehci_cf_port_reset_rwsem);
+	} else if (!warm) {
+		/*
+		 * If the caller hasn't explicitly requested a warm reset,
+		 * double check and see if one is needed.
+		 */
+		if (usb_hub_port_status(hub, port1, &portstatus,
+					&portchange) == 0)
+			if (hub_port_warm_reset_required(hub, port1,
+							portstatus))
+				warm = true;
+	}
+	clear_bit(port1, hub->warm_reset_bits);
+
+	/* Reset the port */
+	for (i = 0; i < PORT_RESET_TRIES; i++) {
+		status = set_port_feature(hub->hdev, port1, (warm ?
+					USB_PORT_FEAT_BH_PORT_RESET :
+					USB_PORT_FEAT_RESET));
+		if (status == -ENODEV) {
+			;	/* The hub is gone */
+		} else if (status) {
+			dev_err(&port_dev->dev,
+					"cannot %sreset (err = %d)\n",
+					warm ? "warm " : "", status);
+		} else {
+			status = hub_port_wait_reset(hub, port1, udev, delay,
+								warm);
+			if (status && status != -ENOTCONN && status != -ENODEV)
+				dev_dbg(hub->intfdev,
+						"port_wait_reset: err = %d\n",
+						status);
+		}
+
+		/*
+		 * Check for disconnect or reset, and bail out after several
+		 * reset attempts to avoid warm reset loop.
+		 */
+		if (status == 0 || status == -ENOTCONN || status == -ENODEV ||
+		    (status == -EBUSY && i == PORT_RESET_TRIES - 1)) {
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_RESET);
+
+			if (!hub_is_superspeed(hub->hdev))
+				goto done;
+
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_PORT_LINK_STATE);
+
+			if (udev)
+				usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_CONNECTION);
+
+			/*
+			 * If a USB 3.0 device migrates from reset to an error
+			 * state, re-issue the warm reset.
+			 */
+			if (usb_hub_port_status(hub, port1,
+					&portstatus, &portchange) < 0)
+				goto done;
+
+			if (!hub_port_warm_reset_required(hub, port1,
+					portstatus))
+				goto done;
+
+			/*
+			 * If the port is in SS.Inactive or Compliance Mode, the
+			 * hot or warm reset failed.  Try another warm reset.
+			 */
+			if (!warm) {
+				dev_dbg(&port_dev->dev,
+						"hot reset failed, warm reset\n");
+				warm = true;
+			}
+		}
+
+		dev_dbg(&port_dev->dev,
+				"not enabled, trying %sreset again...\n",
+				warm ? "warm " : "");
+		delay = HUB_LONG_RESET_TIME;
+	}
+
+	dev_err(&port_dev->dev, "Cannot enable. Maybe the USB cable is bad?\n");
+
+done:
+	if (status == 0) {
+		if (port_dev->quirks & USB_PORT_QUIRK_FAST_ENUM)
+			usleep_range(10000, 12000);
+		else {
+			/* TRSTRCY = 10 ms; plus some extra */
+			reset_recovery_time = 10 + 40;
+
+			/* Hub needs extra delay after resetting its port. */
+			if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET)
+				reset_recovery_time += 100;
+
+			msleep(reset_recovery_time);
+		}
+
+		if (udev) {
+			struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+			update_devnum(udev, 0);
+			/* The xHC may think the device is already reset,
+			 * so ignore the status.
+			 */
+			if (hcd->driver->reset_device)
+				hcd->driver->reset_device(hcd, udev);
+
+			usb_set_device_state(udev, USB_STATE_DEFAULT);
+		}
+	} else {
+		if (udev)
+			usb_set_device_state(udev, USB_STATE_NOTATTACHED);
+	}
+
+	if (!hub_is_superspeed(hub->hdev))
+		up_read(&ehci_cf_port_reset_rwsem);
+
+	return status;
+}
+
+/* Check if a port is power on */
+int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus)
+{
+	int ret = 0;
+
+	if (hub_is_superspeed(hub->hdev)) {
+		if (portstatus & USB_SS_PORT_STAT_POWER)
+			ret = 1;
+	} else {
+		if (portstatus & USB_PORT_STAT_POWER)
+			ret = 1;
+	}
+
+	return ret;
+}
+
+static void usb_lock_port(struct usb_port *port_dev)
+		__acquires(&port_dev->status_lock)
+{
+	mutex_lock(&port_dev->status_lock);
+	__acquire(&port_dev->status_lock);
+}
+
+static void usb_unlock_port(struct usb_port *port_dev)
+		__releases(&port_dev->status_lock)
+{
+	mutex_unlock(&port_dev->status_lock);
+	__release(&port_dev->status_lock);
+}
+
+#ifdef	CONFIG_PM
+
+/* Check if a port is suspended(USB2.0 port) or in U3 state(USB3.0 port) */
+static int port_is_suspended(struct usb_hub *hub, unsigned portstatus)
+{
+	int ret = 0;
+
+	if (hub_is_superspeed(hub->hdev)) {
+		if ((portstatus & USB_PORT_STAT_LINK_STATE)
+				== USB_SS_PORT_LS_U3)
+			ret = 1;
+	} else {
+		if (portstatus & USB_PORT_STAT_SUSPEND)
+			ret = 1;
+	}
+
+	return ret;
+}
+
+/* Determine whether the device on a port is ready for a normal resume,
+ * is ready for a reset-resume, or should be disconnected.
+ */
+static int check_port_resume_type(struct usb_device *udev,
+		struct usb_hub *hub, int port1,
+		int status, u16 portchange, u16 portstatus)
+{
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	int retries = 3;
+
+ retry:
+	/* Is a warm reset needed to recover the connection? */
+	if (status == 0 && udev->reset_resume
+		&& hub_port_warm_reset_required(hub, port1, portstatus)) {
+		/* pass */;
+	}
+	/* Is the device still present? */
+	else if (status || port_is_suspended(hub, portstatus) ||
+			!usb_port_is_power_on(hub, portstatus)) {
+		if (status >= 0)
+			status = -ENODEV;
+	} else if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
+		if (retries--) {
+			usleep_range(200, 300);
+			status = usb_hub_port_status(hub, port1, &portstatus,
+							     &portchange);
+			goto retry;
+		}
+		status = -ENODEV;
+	}
+
+	/* Can't do a normal resume if the port isn't enabled,
+	 * so try a reset-resume instead.
+	 */
+	else if (!(portstatus & USB_PORT_STAT_ENABLE) && !udev->reset_resume) {
+		if (udev->persist_enabled)
+			udev->reset_resume = 1;
+		else
+			status = -ENODEV;
+	}
+
+	if (status) {
+		dev_dbg(&port_dev->dev, "status %04x.%04x after resume, %d\n",
+				portchange, portstatus, status);
+	} else if (udev->reset_resume) {
+
+		/* Late port handoff can set status-change bits */
+		if (portchange & USB_PORT_STAT_C_CONNECTION)
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_CONNECTION);
+		if (portchange & USB_PORT_STAT_C_ENABLE)
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_ENABLE);
+
+		/*
+		 * Whatever made this reset-resume necessary may have
+		 * turned on the port1 bit in hub->change_bits.  But after
+		 * a successful reset-resume we want the bit to be clear;
+		 * if it was on it would indicate that something happened
+		 * following the reset-resume.
+		 */
+		clear_bit(port1, hub->change_bits);
+	}
+
+	return status;
+}
+
+int usb_disable_ltm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	/* Check if the roothub and device supports LTM. */
+	if (!usb_device_supports_ltm(hcd->self.root_hub) ||
+			!usb_device_supports_ltm(udev))
+		return 0;
+
+	/* Clear Feature LTM Enable can only be sent if the device is
+	 * configured.
+	 */
+	if (!udev->actconfig)
+		return 0;
+
+	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
+			USB_DEVICE_LTM_ENABLE, 0, NULL, 0,
+			USB_CTRL_SET_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(usb_disable_ltm);
+
+void usb_enable_ltm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	/* Check if the roothub and device supports LTM. */
+	if (!usb_device_supports_ltm(hcd->self.root_hub) ||
+			!usb_device_supports_ltm(udev))
+		return;
+
+	/* Set Feature LTM Enable can only be sent if the device is
+	 * configured.
+	 */
+	if (!udev->actconfig)
+		return;
+
+	usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+			USB_DEVICE_LTM_ENABLE, 0, NULL, 0,
+			USB_CTRL_SET_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(usb_enable_ltm);
+
+/*
+ * usb_enable_remote_wakeup - enable remote wakeup for a device
+ * @udev: target device
+ *
+ * For USB-2 devices: Set the device's remote wakeup feature.
+ *
+ * For USB-3 devices: Assume there's only one function on the device and
+ * enable remote wake for the first interface.  FIXME if the interface
+ * association descriptor shows there's more than one function.
+ */
+static int usb_enable_remote_wakeup(struct usb_device *udev)
+{
+	if (udev->speed < USB_SPEED_SUPER)
+		return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+				USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+	else
+		return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE,
+				USB_INTRF_FUNC_SUSPEND,
+				USB_INTRF_FUNC_SUSPEND_RW |
+					USB_INTRF_FUNC_SUSPEND_LP,
+				NULL, 0, USB_CTRL_SET_TIMEOUT);
+}
+
+/*
+ * usb_disable_remote_wakeup - disable remote wakeup for a device
+ * @udev: target device
+ *
+ * For USB-2 devices: Clear the device's remote wakeup feature.
+ *
+ * For USB-3 devices: Assume there's only one function on the device and
+ * disable remote wake for the first interface.  FIXME if the interface
+ * association descriptor shows there's more than one function.
+ */
+static int usb_disable_remote_wakeup(struct usb_device *udev)
+{
+	if (udev->speed < USB_SPEED_SUPER)
+		return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
+				USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+	else
+		return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE,
+				USB_INTRF_FUNC_SUSPEND,	0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+}
+
+/* Count of wakeup-enabled devices at or below udev */
+unsigned usb_wakeup_enabled_descendants(struct usb_device *udev)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(udev);
+
+	return udev->do_remote_wakeup +
+			(hub ? hub->wakeup_enabled_descendants : 0);
+}
+EXPORT_SYMBOL_GPL(usb_wakeup_enabled_descendants);
+
+/*
+ * usb_port_suspend - suspend a usb device's upstream port
+ * @udev: device that's no longer in active use, not a root hub
+ * Context: must be able to sleep; device not locked; pm locks held
+ *
+ * Suspends a USB device that isn't in active use, conserving power.
+ * Devices may wake out of a suspend, if anything important happens,
+ * using the remote wakeup mechanism.  They may also be taken out of
+ * suspend by the host, using usb_port_resume().  It's also routine
+ * to disconnect devices while they are suspended.
+ *
+ * This only affects the USB hardware for a device; its interfaces
+ * (and, for hubs, child devices) must already have been suspended.
+ *
+ * Selective port suspend reduces power; most suspended devices draw
+ * less than 500 uA.  It's also used in OTG, along with remote wakeup.
+ * All devices below the suspended port are also suspended.
+ *
+ * Devices leave suspend state when the host wakes them up.  Some devices
+ * also support "remote wakeup", where the device can activate the USB
+ * tree above them to deliver data, such as a keypress or packet.  In
+ * some cases, this wakes the USB host.
+ *
+ * Suspending OTG devices may trigger HNP, if that's been enabled
+ * between a pair of dual-role devices.  That will change roles, such
+ * as from A-Host to A-Peripheral or from B-Host back to B-Peripheral.
+ *
+ * Devices on USB hub ports have only one "suspend" state, corresponding
+ * to ACPI D2, "may cause the device to lose some context".
+ * State transitions include:
+ *
+ *   - suspend, resume ... when the VBUS power link stays live
+ *   - suspend, disconnect ... VBUS lost
+ *
+ * Once VBUS drop breaks the circuit, the port it's using has to go through
+ * normal re-enumeration procedures, starting with enabling VBUS power.
+ * Other than re-initializing the hub (plug/unplug, except for root hubs),
+ * Linux (2.6) currently has NO mechanisms to initiate that:  no hub_wq
+ * timer, no SRP, no requests through sysfs.
+ *
+ * If Runtime PM isn't enabled or used, non-SuperSpeed devices may not get
+ * suspended until their bus goes into global suspend (i.e., the root
+ * hub is suspended).  Nevertheless, we change @udev->state to
+ * USB_STATE_SUSPENDED as this is the device's "logical" state.  The actual
+ * upstream port setting is stored in @udev->port_is_suspended.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
+{
+	struct usb_hub	*hub = usb_hub_to_struct_hub(udev->parent);
+	struct usb_port *port_dev = hub->ports[udev->portnum - 1];
+	int		port1 = udev->portnum;
+	int		status;
+	bool		really_suspend = true;
+
+	usb_lock_port(port_dev);
+
+	/* enable remote wakeup when appropriate; this lets the device
+	 * wake up the upstream hub (including maybe the root hub).
+	 *
+	 * NOTE:  OTG devices may issue remote wakeup (or SRP) even when
+	 * we don't explicitly enable it here.
+	 */
+	if (udev->do_remote_wakeup) {
+		status = usb_enable_remote_wakeup(udev);
+		if (status) {
+			dev_dbg(&udev->dev, "won't remote wakeup, status %d\n",
+					status);
+			/* bail if autosuspend is requested */
+			if (PMSG_IS_AUTO(msg))
+				goto err_wakeup;
+		}
+	}
+
+	/* disable USB2 hardware LPM */
+	usb_disable_usb2_hardware_lpm(udev);
+
+	if (usb_disable_ltm(udev)) {
+		dev_err(&udev->dev, "Failed to disable LTM before suspend\n");
+		status = -ENOMEM;
+		if (PMSG_IS_AUTO(msg))
+			goto err_ltm;
+	}
+
+	/* see 7.1.7.6 */
+	if (hub_is_superspeed(hub->hdev))
+		status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U3);
+
+	/*
+	 * For system suspend, we do not need to enable the suspend feature
+	 * on individual USB-2 ports.  The devices will automatically go
+	 * into suspend a few ms after the root hub stops sending packets.
+	 * The USB 2.0 spec calls this "global suspend".
+	 *
+	 * However, many USB hubs have a bug: They don't relay wakeup requests
+	 * from a downstream port if the port's suspend feature isn't on.
+	 * Therefore we will turn on the suspend feature if udev or any of its
+	 * descendants is enabled for remote wakeup.
+	 */
+	else if (PMSG_IS_AUTO(msg) || usb_wakeup_enabled_descendants(udev) > 0)
+		status = set_port_feature(hub->hdev, port1,
+				USB_PORT_FEAT_SUSPEND);
+	else {
+		really_suspend = false;
+		status = 0;
+	}
+	if (status) {
+		/* Check if the port has been suspended for the timeout case
+		 * to prevent the suspended port from incorrect handling.
+		 */
+		if (status == -ETIMEDOUT) {
+			int ret;
+			u16 portstatus, portchange;
+
+			portstatus = portchange = 0;
+			ret = usb_hub_port_status(hub, port1, &portstatus,
+					&portchange);
+
+			dev_dbg(&port_dev->dev,
+				"suspend timeout, status %04x\n", portstatus);
+
+			if (ret == 0 && port_is_suspended(hub, portstatus)) {
+				status = 0;
+				goto suspend_done;
+			}
+		}
+
+		dev_dbg(&port_dev->dev, "can't suspend, status %d\n", status);
+
+		/* Try to enable USB3 LTM again */
+		usb_enable_ltm(udev);
+ err_ltm:
+		/* Try to enable USB2 hardware LPM again */
+		usb_enable_usb2_hardware_lpm(udev);
+
+		if (udev->do_remote_wakeup)
+			(void) usb_disable_remote_wakeup(udev);
+ err_wakeup:
+
+		/* System sleep transitions should never fail */
+		if (!PMSG_IS_AUTO(msg))
+			status = 0;
+	} else {
+ suspend_done:
+		dev_dbg(&udev->dev, "usb %ssuspend, wakeup %d\n",
+				(PMSG_IS_AUTO(msg) ? "auto-" : ""),
+				udev->do_remote_wakeup);
+		if (really_suspend) {
+			udev->port_is_suspended = 1;
+
+			/* device has up to 10 msec to fully suspend */
+			msleep(10);
+		}
+		usb_set_device_state(udev, USB_STATE_SUSPENDED);
+	}
+
+	if (status == 0 && !udev->do_remote_wakeup && udev->persist_enabled
+			&& test_and_clear_bit(port1, hub->child_usage_bits))
+		pm_runtime_put_sync(&port_dev->dev);
+
+	usb_mark_last_busy(hub->hdev);
+
+	usb_unlock_port(port_dev);
+	return status;
+}
+
+/*
+ * If the USB "suspend" state is in use (rather than "global suspend"),
+ * many devices will be individually taken out of suspend state using
+ * special "resume" signaling.  This routine kicks in shortly after
+ * hardware resume signaling is finished, either because of selective
+ * resume (by host) or remote wakeup (by device) ... now see what changed
+ * in the tree that's rooted at this device.
+ *
+ * If @udev->reset_resume is set then the device is reset before the
+ * status check is done.
+ */
+static int finish_port_resume(struct usb_device *udev)
+{
+	int	status = 0;
+	u16	devstatus = 0;
+
+	/* caller owns the udev device lock */
+	dev_dbg(&udev->dev, "%s\n",
+		udev->reset_resume ? "finish reset-resume" : "finish resume");
+
+	/* usb ch9 identifies four variants of SUSPENDED, based on what
+	 * state the device resumes to.  Linux currently won't see the
+	 * first two on the host side; they'd be inside hub_port_init()
+	 * during many timeouts, but hub_wq can't suspend until later.
+	 */
+	usb_set_device_state(udev, udev->actconfig
+			? USB_STATE_CONFIGURED
+			: USB_STATE_ADDRESS);
+
+	/* 10.5.4.5 says not to reset a suspended port if the attached
+	 * device is enabled for remote wakeup.  Hence the reset
+	 * operation is carried out here, after the port has been
+	 * resumed.
+	 */
+	if (udev->reset_resume) {
+		/*
+		 * If the device morphs or switches modes when it is reset,
+		 * we don't want to perform a reset-resume.  We'll fail the
+		 * resume, which will cause a logical disconnect, and then
+		 * the device will be rediscovered.
+		 */
+ retry_reset_resume:
+		if (udev->quirks & USB_QUIRK_RESET)
+			status = -ENODEV;
+		else
+			status = usb_reset_and_verify_device(udev);
+	}
+
+	/* 10.5.4.5 says be sure devices in the tree are still there.
+	 * For now let's assume the device didn't go crazy on resume,
+	 * and device drivers will know about any resume quirks.
+	 */
+	if (status == 0) {
+		devstatus = 0;
+		status = usb_get_std_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
+
+		/* If a normal resume failed, try doing a reset-resume */
+		if (status && !udev->reset_resume && udev->persist_enabled) {
+			dev_dbg(&udev->dev, "retry with reset-resume\n");
+			udev->reset_resume = 1;
+			goto retry_reset_resume;
+		}
+	}
+
+	if (status) {
+		dev_dbg(&udev->dev, "gone after usb resume? status %d\n",
+				status);
+	/*
+	 * There are a few quirky devices which violate the standard
+	 * by claiming to have remote wakeup enabled after a reset,
+	 * which crash if the feature is cleared, hence check for
+	 * udev->reset_resume
+	 */
+	} else if (udev->actconfig && !udev->reset_resume) {
+		if (udev->speed < USB_SPEED_SUPER) {
+			if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP))
+				status = usb_disable_remote_wakeup(udev);
+		} else {
+			status = usb_get_std_status(udev, USB_RECIP_INTERFACE, 0,
+					&devstatus);
+			if (!status && devstatus & (USB_INTRF_STAT_FUNC_RW_CAP
+					| USB_INTRF_STAT_FUNC_RW))
+				status = usb_disable_remote_wakeup(udev);
+		}
+
+		if (status)
+			dev_dbg(&udev->dev,
+				"disable remote wakeup, status %d\n",
+				status);
+		status = 0;
+	}
+	return status;
+}
+
+/*
+ * There are some SS USB devices which take longer time for link training.
+ * XHCI specs 4.19.4 says that when Link training is successful, port
+ * sets CCS bit to 1. So if SW reads port status before successful link
+ * training, then it will not find device to be present.
+ * USB Analyzer log with such buggy devices show that in some cases
+ * device switch on the RX termination after long delay of host enabling
+ * the VBUS. In few other cases it has been seen that device fails to
+ * negotiate link training in first attempt. It has been
+ * reported till now that few devices take as long as 2000 ms to train
+ * the link after host enabling its VBUS and termination. Following
+ * routine implements a 2000 ms timeout for link training. If in a case
+ * link trains before timeout, loop will exit earlier.
+ *
+ * There are also some 2.0 hard drive based devices and 3.0 thumb
+ * drives that, when plugged into a 2.0 only port, take a long
+ * time to set CCS after VBUS enable.
+ *
+ * FIXME: If a device was connected before suspend, but was removed
+ * while system was asleep, then the loop in the following routine will
+ * only exit at timeout.
+ *
+ * This routine should only be called when persist is enabled.
+ */
+static int wait_for_connected(struct usb_device *udev,
+		struct usb_hub *hub, int port1,
+		u16 *portchange, u16 *portstatus)
+{
+	int status = 0, delay_ms = 0;
+
+	while (delay_ms < 2000) {
+		if (status || *portstatus & USB_PORT_STAT_CONNECTION)
+			break;
+		if (!usb_port_is_power_on(hub, *portstatus)) {
+			status = -ENODEV;
+			break;
+		}
+		msleep(20);
+		delay_ms += 20;
+		status = usb_hub_port_status(hub, port1, portstatus, portchange);
+	}
+	dev_dbg(&udev->dev, "Waited %dms for CONNECT\n", delay_ms);
+	return status;
+}
+
+/*
+ * usb_port_resume - re-activate a suspended usb device's upstream port
+ * @udev: device to re-activate, not a root hub
+ * Context: must be able to sleep; device not locked; pm locks held
+ *
+ * This will re-activate the suspended device, increasing power usage
+ * while letting drivers communicate again with its endpoints.
+ * USB resume explicitly guarantees that the power session between
+ * the host and the device is the same as it was when the device
+ * suspended.
+ *
+ * If @udev->reset_resume is set then this routine won't check that the
+ * port is still enabled.  Furthermore, finish_port_resume() above will
+ * reset @udev.  The end result is that a broken power session can be
+ * recovered and @udev will appear to persist across a loss of VBUS power.
+ *
+ * For example, if a host controller doesn't maintain VBUS suspend current
+ * during a system sleep or is reset when the system wakes up, all the USB
+ * power sessions below it will be broken.  This is especially troublesome
+ * for mass-storage devices containing mounted filesystems, since the
+ * device will appear to have disconnected and all the memory mappings
+ * to it will be lost.  Using the USB_PERSIST facility, the device can be
+ * made to appear as if it had not disconnected.
+ *
+ * This facility can be dangerous.  Although usb_reset_and_verify_device() makes
+ * every effort to insure that the same device is present after the
+ * reset as before, it cannot provide a 100% guarantee.  Furthermore it's
+ * quite possible for a device to remain unaltered but its media to be
+ * changed.  If the user replaces a flash memory card while the system is
+ * asleep, he will have only himself to blame when the filesystem on the
+ * new card is corrupted and the system crashes.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int usb_port_resume(struct usb_device *udev, pm_message_t msg)
+{
+	struct usb_hub	*hub = usb_hub_to_struct_hub(udev->parent);
+	struct usb_port *port_dev = hub->ports[udev->portnum  - 1];
+	int		port1 = udev->portnum;
+	int		status;
+	u16		portchange, portstatus;
+
+	if (!test_and_set_bit(port1, hub->child_usage_bits)) {
+		status = pm_runtime_resume_and_get(&port_dev->dev);
+		if (status < 0) {
+			dev_dbg(&udev->dev, "can't resume usb port, status %d\n",
+					status);
+			return status;
+		}
+	}
+
+	usb_lock_port(port_dev);
+
+	/* Skip the initial Clear-Suspend step for a remote wakeup */
+	status = usb_hub_port_status(hub, port1, &portstatus, &portchange);
+	if (status == 0 && !port_is_suspended(hub, portstatus)) {
+		if (portchange & USB_PORT_STAT_C_SUSPEND)
+			pm_wakeup_event(&udev->dev, 0);
+		goto SuspendCleared;
+	}
+
+	/* see 7.1.7.7; affects power usage, but not budgeting */
+	if (hub_is_superspeed(hub->hdev))
+		status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U0);
+	else
+		status = usb_clear_port_feature(hub->hdev,
+				port1, USB_PORT_FEAT_SUSPEND);
+	if (status) {
+		dev_dbg(&port_dev->dev, "can't resume, status %d\n", status);
+	} else {
+		/* drive resume for USB_RESUME_TIMEOUT msec */
+		dev_dbg(&udev->dev, "usb %sresume\n",
+				(PMSG_IS_AUTO(msg) ? "auto-" : ""));
+		msleep(USB_RESUME_TIMEOUT);
+
+		/* Virtual root hubs can trigger on GET_PORT_STATUS to
+		 * stop resume signaling.  Then finish the resume
+		 * sequence.
+		 */
+		status = usb_hub_port_status(hub, port1, &portstatus, &portchange);
+	}
+
+ SuspendCleared:
+	if (status == 0) {
+		udev->port_is_suspended = 0;
+		if (hub_is_superspeed(hub->hdev)) {
+			if (portchange & USB_PORT_STAT_C_LINK_STATE)
+				usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_PORT_LINK_STATE);
+		} else {
+			if (portchange & USB_PORT_STAT_C_SUSPEND)
+				usb_clear_port_feature(hub->hdev, port1,
+						USB_PORT_FEAT_C_SUSPEND);
+		}
+
+		/* TRSMRCY = 10 msec */
+		msleep(10);
+	}
+
+	if (udev->persist_enabled)
+		status = wait_for_connected(udev, hub, port1, &portchange,
+				&portstatus);
+
+	status = check_port_resume_type(udev,
+			hub, port1, status, portchange, portstatus);
+	if (status == 0)
+		status = finish_port_resume(udev);
+	if (status < 0) {
+		dev_dbg(&udev->dev, "can't resume, status %d\n", status);
+		hub_port_logical_disconnect(hub, port1);
+	} else  {
+		/* Try to enable USB2 hardware LPM */
+		usb_enable_usb2_hardware_lpm(udev);
+
+		/* Try to enable USB3 LTM */
+		usb_enable_ltm(udev);
+	}
+
+	usb_unlock_port(port_dev);
+
+	return status;
+}
+
+int usb_remote_wakeup(struct usb_device *udev)
+{
+	int	status = 0;
+
+	usb_lock_device(udev);
+	if (udev->state == USB_STATE_SUSPENDED) {
+		dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
+		status = usb_autoresume_device(udev);
+		if (status == 0) {
+			/* Let the drivers do their thing, then... */
+			usb_autosuspend_device(udev);
+		}
+	}
+	usb_unlock_device(udev);
+	return status;
+}
+
+/* Returns 1 if there was a remote wakeup and a connect status change. */
+static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
+		u16 portstatus, u16 portchange)
+		__must_hold(&port_dev->status_lock)
+{
+	struct usb_port *port_dev = hub->ports[port - 1];
+	struct usb_device *hdev;
+	struct usb_device *udev;
+	int connect_change = 0;
+	u16 link_state;
+	int ret;
+
+	hdev = hub->hdev;
+	udev = port_dev->child;
+	if (!hub_is_superspeed(hdev)) {
+		if (!(portchange & USB_PORT_STAT_C_SUSPEND))
+			return 0;
+		usb_clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND);
+	} else {
+		link_state = portstatus & USB_PORT_STAT_LINK_STATE;
+		if (!udev || udev->state != USB_STATE_SUSPENDED ||
+				(link_state != USB_SS_PORT_LS_U0 &&
+				 link_state != USB_SS_PORT_LS_U1 &&
+				 link_state != USB_SS_PORT_LS_U2))
+			return 0;
+	}
+
+	if (udev) {
+		/* TRSMRCY = 10 msec */
+		msleep(10);
+
+		usb_unlock_port(port_dev);
+		ret = usb_remote_wakeup(udev);
+		usb_lock_port(port_dev);
+		if (ret < 0)
+			connect_change = 1;
+	} else {
+		ret = -ENODEV;
+		hub_port_disable(hub, port, 1);
+	}
+	dev_dbg(&port_dev->dev, "resume, status %d\n", ret);
+	return connect_change;
+}
+
+static int check_ports_changed(struct usb_hub *hub)
+{
+	int port1;
+
+	for (port1 = 1; port1 <= hub->hdev->maxchild; ++port1) {
+		u16 portstatus, portchange;
+		int status;
+
+		status = usb_hub_port_status(hub, port1, &portstatus, &portchange);
+		if (!status && portchange)
+			return 1;
+	}
+	return 0;
+}
+
+static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
+{
+	struct usb_hub		*hub = usb_get_intfdata(intf);
+	struct usb_device	*hdev = hub->hdev;
+	unsigned		port1;
+
+	/*
+	 * Warn if children aren't already suspended.
+	 * Also, add up the number of wakeup-enabled descendants.
+	 */
+	hub->wakeup_enabled_descendants = 0;
+	for (port1 = 1; port1 <= hdev->maxchild; port1++) {
+		struct usb_port *port_dev = hub->ports[port1 - 1];
+		struct usb_device *udev = port_dev->child;
+
+		if (udev && udev->can_submit) {
+			dev_warn(&port_dev->dev, "device %s not suspended yet\n",
+					dev_name(&udev->dev));
+			if (PMSG_IS_AUTO(msg))
+				return -EBUSY;
+		}
+		if (udev)
+			hub->wakeup_enabled_descendants +=
+					usb_wakeup_enabled_descendants(udev);
+	}
+
+	if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) {
+		/* check if there are changes pending on hub ports */
+		if (check_ports_changed(hub)) {
+			if (PMSG_IS_AUTO(msg))
+				return -EBUSY;
+			pm_wakeup_event(&hdev->dev, 2000);
+		}
+	}
+
+	if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) {
+		/* Enable hub to send remote wakeup for all ports. */
+		for (port1 = 1; port1 <= hdev->maxchild; port1++) {
+			set_port_feature(hdev,
+					 port1 |
+					 USB_PORT_FEAT_REMOTE_WAKE_CONNECT |
+					 USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT |
+					 USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT,
+					 USB_PORT_FEAT_REMOTE_WAKE_MASK);
+		}
+	}
+
+	dev_dbg(&intf->dev, "%s\n", __func__);
+
+	/* stop hub_wq and related activity */
+	hub_quiesce(hub, HUB_SUSPEND);
+	return 0;
+}
+
+/* Report wakeup requests from the ports of a resuming root hub */
+static void report_wakeup_requests(struct usb_hub *hub)
+{
+	struct usb_device	*hdev = hub->hdev;
+	struct usb_device	*udev;
+	struct usb_hcd		*hcd;
+	unsigned long		resuming_ports;
+	int			i;
+
+	if (hdev->parent)
+		return;		/* Not a root hub */
+
+	hcd = bus_to_hcd(hdev->bus);
+	if (hcd->driver->get_resuming_ports) {
+
+		/*
+		 * The get_resuming_ports() method returns a bitmap (origin 0)
+		 * of ports which have started wakeup signaling but have not
+		 * yet finished resuming.  During system resume we will
+		 * resume all the enabled ports, regardless of any wakeup
+		 * signals, which means the wakeup requests would be lost.
+		 * To prevent this, report them to the PM core here.
+		 */
+		resuming_ports = hcd->driver->get_resuming_ports(hcd);
+		for (i = 0; i < hdev->maxchild; ++i) {
+			if (test_bit(i, &resuming_ports)) {
+				udev = hub->ports[i]->child;
+				if (udev)
+					pm_wakeup_event(&udev->dev, 0);
+			}
+		}
+	}
+}
+
+static int hub_resume(struct usb_interface *intf)
+{
+	struct usb_hub *hub = usb_get_intfdata(intf);
+
+	dev_dbg(&intf->dev, "%s\n", __func__);
+	hub_activate(hub, HUB_RESUME);
+
+	/*
+	 * This should be called only for system resume, not runtime resume.
+	 * We can't tell the difference here, so some wakeup requests will be
+	 * reported at the wrong time or more than once.  This shouldn't
+	 * matter much, so long as they do get reported.
+	 */
+	report_wakeup_requests(hub);
+	return 0;
+}
+
+static int hub_reset_resume(struct usb_interface *intf)
+{
+	struct usb_hub *hub = usb_get_intfdata(intf);
+
+	dev_dbg(&intf->dev, "%s\n", __func__);
+	hub_activate(hub, HUB_RESET_RESUME);
+	return 0;
+}
+
+/**
+ * usb_root_hub_lost_power - called by HCD if the root hub lost Vbus power
+ * @rhdev: struct usb_device for the root hub
+ *
+ * The USB host controller driver calls this function when its root hub
+ * is resumed and Vbus power has been interrupted or the controller
+ * has been reset.  The routine marks @rhdev as having lost power.
+ * When the hub driver is resumed it will take notice and carry out
+ * power-session recovery for all the "USB-PERSIST"-enabled child devices;
+ * the others will be disconnected.
+ */
+void usb_root_hub_lost_power(struct usb_device *rhdev)
+{
+	dev_notice(&rhdev->dev, "root hub lost power or was reset\n");
+	rhdev->reset_resume = 1;
+}
+EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
+
+static const char * const usb3_lpm_names[]  = {
+	"U0",
+	"U1",
+	"U2",
+	"U3",
+};
+
+/*
+ * Send a Set SEL control transfer to the device, prior to enabling
+ * device-initiated U1 or U2.  This lets the device know the exit latencies from
+ * the time the device initiates a U1 or U2 exit, to the time it will receive a
+ * packet from the host.
+ *
+ * This function will fail if the SEL or PEL values for udev are greater than
+ * the maximum allowed values for the link state to be enabled.
+ */
+static int usb_req_set_sel(struct usb_device *udev)
+{
+	struct usb_set_sel_req *sel_values;
+	unsigned long long u1_sel;
+	unsigned long long u1_pel;
+	unsigned long long u2_sel;
+	unsigned long long u2_pel;
+	int ret;
+
+	if (!udev->parent || udev->speed < USB_SPEED_SUPER || !udev->lpm_capable)
+		return 0;
+
+	/* Convert SEL and PEL stored in ns to us */
+	u1_sel = DIV_ROUND_UP(udev->u1_params.sel, 1000);
+	u1_pel = DIV_ROUND_UP(udev->u1_params.pel, 1000);
+	u2_sel = DIV_ROUND_UP(udev->u2_params.sel, 1000);
+	u2_pel = DIV_ROUND_UP(udev->u2_params.pel, 1000);
+
+	/*
+	 * Make sure that the calculated SEL and PEL values for the link
+	 * state we're enabling aren't bigger than the max SEL/PEL
+	 * value that will fit in the SET SEL control transfer.
+	 * Otherwise the device would get an incorrect idea of the exit
+	 * latency for the link state, and could start a device-initiated
+	 * U1/U2 when the exit latencies are too high.
+	 */
+	if (u1_sel > USB3_LPM_MAX_U1_SEL_PEL ||
+	    u1_pel > USB3_LPM_MAX_U1_SEL_PEL ||
+	    u2_sel > USB3_LPM_MAX_U2_SEL_PEL ||
+	    u2_pel > USB3_LPM_MAX_U2_SEL_PEL) {
+		dev_dbg(&udev->dev, "Device-initiated U1/U2 disabled due to long SEL or PEL\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * usb_enable_lpm() can be called as part of a failed device reset,
+	 * which may be initiated by an error path of a mass storage driver.
+	 * Therefore, use GFP_NOIO.
+	 */
+	sel_values = kmalloc(sizeof *(sel_values), GFP_NOIO);
+	if (!sel_values)
+		return -ENOMEM;
+
+	sel_values->u1_sel = u1_sel;
+	sel_values->u1_pel = u1_pel;
+	sel_values->u2_sel = cpu_to_le16(u2_sel);
+	sel_values->u2_pel = cpu_to_le16(u2_pel);
+
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			USB_REQ_SET_SEL,
+			USB_RECIP_DEVICE,
+			0, 0,
+			sel_values, sizeof *(sel_values),
+			USB_CTRL_SET_TIMEOUT);
+	kfree(sel_values);
+
+	if (ret > 0)
+		udev->lpm_devinit_allow = 1;
+
+	return ret;
+}
+
+/*
+ * Enable or disable device-initiated U1 or U2 transitions.
+ */
+static int usb_set_device_initiated_lpm(struct usb_device *udev,
+		enum usb3_link_state state, bool enable)
+{
+	int ret;
+	int feature;
+
+	switch (state) {
+	case USB3_LPM_U1:
+		feature = USB_DEVICE_U1_ENABLE;
+		break;
+	case USB3_LPM_U2:
+		feature = USB_DEVICE_U2_ENABLE;
+		break;
+	default:
+		dev_warn(&udev->dev, "%s: Can't %s non-U1 or U2 state.\n",
+				__func__, enable ? "enable" : "disable");
+		return -EINVAL;
+	}
+
+	if (udev->state != USB_STATE_CONFIGURED) {
+		dev_dbg(&udev->dev, "%s: Can't %s %s state "
+				"for unconfigured device.\n",
+				__func__, enable ? "enable" : "disable",
+				usb3_lpm_names[state]);
+		return 0;
+	}
+
+	if (enable) {
+		/*
+		 * Now send the control transfer to enable device-initiated LPM
+		 * for either U1 or U2.
+		 */
+		ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				USB_REQ_SET_FEATURE,
+				USB_RECIP_DEVICE,
+				feature,
+				0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+	} else {
+		ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				USB_REQ_CLEAR_FEATURE,
+				USB_RECIP_DEVICE,
+				feature,
+				0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+	}
+	if (ret < 0) {
+		dev_warn(&udev->dev, "%s of device-initiated %s failed.\n",
+				enable ? "Enable" : "Disable",
+				usb3_lpm_names[state]);
+		return -EBUSY;
+	}
+	return 0;
+}
+
+static int usb_set_lpm_timeout(struct usb_device *udev,
+		enum usb3_link_state state, int timeout)
+{
+	int ret;
+	int feature;
+
+	switch (state) {
+	case USB3_LPM_U1:
+		feature = USB_PORT_FEAT_U1_TIMEOUT;
+		break;
+	case USB3_LPM_U2:
+		feature = USB_PORT_FEAT_U2_TIMEOUT;
+		break;
+	default:
+		dev_warn(&udev->dev, "%s: Can't set timeout for non-U1 or U2 state.\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	if (state == USB3_LPM_U1 && timeout > USB3_LPM_U1_MAX_TIMEOUT &&
+			timeout != USB3_LPM_DEVICE_INITIATED) {
+		dev_warn(&udev->dev, "Failed to set %s timeout to 0x%x, "
+				"which is a reserved value.\n",
+				usb3_lpm_names[state], timeout);
+		return -EINVAL;
+	}
+
+	ret = set_port_feature(udev->parent,
+			USB_PORT_LPM_TIMEOUT(timeout) | udev->portnum,
+			feature);
+	if (ret < 0) {
+		dev_warn(&udev->dev, "Failed to set %s timeout to 0x%x,"
+				"error code %i\n", usb3_lpm_names[state],
+				timeout, ret);
+		return -EBUSY;
+	}
+	if (state == USB3_LPM_U1)
+		udev->u1_params.timeout = timeout;
+	else
+		udev->u2_params.timeout = timeout;
+	return 0;
+}
+
+/*
+ * Don't allow device intiated U1/U2 if the system exit latency + one bus
+ * interval is greater than the minimum service interval of any active
+ * periodic endpoint. See USB 3.2 section 9.4.9
+ */
+static bool usb_device_may_initiate_lpm(struct usb_device *udev,
+					enum usb3_link_state state)
+{
+	unsigned int sel;		/* us */
+	int i, j;
+
+	if (!udev->lpm_devinit_allow)
+		return false;
+
+	if (state == USB3_LPM_U1)
+		sel = DIV_ROUND_UP(udev->u1_params.sel, 1000);
+	else if (state == USB3_LPM_U2)
+		sel = DIV_ROUND_UP(udev->u2_params.sel, 1000);
+	else
+		return false;
+
+	for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+		struct usb_interface *intf;
+		struct usb_endpoint_descriptor *desc;
+		unsigned int interval;
+
+		intf = udev->actconfig->interface[i];
+		if (!intf)
+			continue;
+
+		for (j = 0; j < intf->cur_altsetting->desc.bNumEndpoints; j++) {
+			desc = &intf->cur_altsetting->endpoint[j].desc;
+
+			if (usb_endpoint_xfer_int(desc) ||
+			    usb_endpoint_xfer_isoc(desc)) {
+				interval = (1 << (desc->bInterval - 1)) * 125;
+				if (sel + 125 > interval)
+					return false;
+			}
+		}
+	}
+	return true;
+}
+
+/*
+ * Enable the hub-initiated U1/U2 idle timeouts, and enable device-initiated
+ * U1/U2 entry.
+ *
+ * We will attempt to enable U1 or U2, but there are no guarantees that the
+ * control transfers to set the hub timeout or enable device-initiated U1/U2
+ * will be successful.
+ *
+ * If the control transfer to enable device-initiated U1/U2 entry fails, then
+ * hub-initiated U1/U2 will be disabled.
+ *
+ * If we cannot set the parent hub U1/U2 timeout, we attempt to let the xHCI
+ * driver know about it.  If that call fails, it should be harmless, and just
+ * take up more slightly more bus bandwidth for unnecessary U1/U2 exit latency.
+ */
+static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
+		enum usb3_link_state state)
+{
+	int timeout;
+	__u8 u1_mel;
+	__le16 u2_mel;
+
+	/* Skip if the device BOS descriptor couldn't be read */
+	if (!udev->bos)
+		return;
+
+	u1_mel = udev->bos->ss_cap->bU1devExitLat;
+	u2_mel = udev->bos->ss_cap->bU2DevExitLat;
+
+	/* If the device says it doesn't have *any* exit latency to come out of
+	 * U1 or U2, it's probably lying.  Assume it doesn't implement that link
+	 * state.
+	 */
+	if ((state == USB3_LPM_U1 && u1_mel == 0) ||
+			(state == USB3_LPM_U2 && u2_mel == 0))
+		return;
+
+	/* We allow the host controller to set the U1/U2 timeout internally
+	 * first, so that it can change its schedule to account for the
+	 * additional latency to send data to a device in a lower power
+	 * link state.
+	 */
+	timeout = hcd->driver->enable_usb3_lpm_timeout(hcd, udev, state);
+
+	/* xHCI host controller doesn't want to enable this LPM state. */
+	if (timeout == 0)
+		return;
+
+	if (timeout < 0) {
+		dev_warn(&udev->dev, "Could not enable %s link state, "
+				"xHCI error %i.\n", usb3_lpm_names[state],
+				timeout);
+		return;
+	}
+
+	if (usb_set_lpm_timeout(udev, state, timeout)) {
+		/* If we can't set the parent hub U1/U2 timeout,
+		 * device-initiated LPM won't be allowed either, so let the xHCI
+		 * host know that this link state won't be enabled.
+		 */
+		hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
+		return;
+	}
+
+	/* Only a configured device will accept the Set Feature
+	 * U1/U2_ENABLE
+	 */
+	if (udev->actconfig &&
+	    usb_device_may_initiate_lpm(udev, state)) {
+		if (usb_set_device_initiated_lpm(udev, state, true)) {
+			/*
+			 * Request to enable device initiated U1/U2 failed,
+			 * better to turn off lpm in this case.
+			 */
+			usb_set_lpm_timeout(udev, state, 0);
+			hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
+			return;
+		}
+	}
+
+	if (state == USB3_LPM_U1)
+		udev->usb3_lpm_u1_enabled = 1;
+	else if (state == USB3_LPM_U2)
+		udev->usb3_lpm_u2_enabled = 1;
+}
+/*
+ * Disable the hub-initiated U1/U2 idle timeouts, and disable device-initiated
+ * U1/U2 entry.
+ *
+ * If this function returns -EBUSY, the parent hub will still allow U1/U2 entry.
+ * If zero is returned, the parent will not allow the link to go into U1/U2.
+ *
+ * If zero is returned, device-initiated U1/U2 entry may still be enabled, but
+ * it won't have an effect on the bus link state because the parent hub will
+ * still disallow device-initiated U1/U2 entry.
+ *
+ * If zero is returned, the xHCI host controller may still think U1/U2 entry is
+ * possible.  The result will be slightly more bus bandwidth will be taken up
+ * (to account for U1/U2 exit latency), but it should be harmless.
+ */
+static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
+		enum usb3_link_state state)
+{
+	switch (state) {
+	case USB3_LPM_U1:
+	case USB3_LPM_U2:
+		break;
+	default:
+		dev_warn(&udev->dev, "%s: Can't disable non-U1 or U2 state.\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	if (usb_set_lpm_timeout(udev, state, 0))
+		return -EBUSY;
+
+	usb_set_device_initiated_lpm(udev, state, false);
+
+	if (hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state))
+		dev_warn(&udev->dev, "Could not disable xHCI %s timeout, "
+				"bus schedule bandwidth may be impacted.\n",
+				usb3_lpm_names[state]);
+
+	/* As soon as usb_set_lpm_timeout(0) return 0, hub initiated LPM
+	 * is disabled. Hub will disallows link to enter U1/U2 as well,
+	 * even device is initiating LPM. Hence LPM is disabled if hub LPM
+	 * timeout set to 0, no matter device-initiated LPM is disabled or
+	 * not.
+	 */
+	if (state == USB3_LPM_U1)
+		udev->usb3_lpm_u1_enabled = 0;
+	else if (state == USB3_LPM_U2)
+		udev->usb3_lpm_u2_enabled = 0;
+
+	return 0;
+}
+
+/*
+ * Disable hub-initiated and device-initiated U1 and U2 entry.
+ * Caller must own the bandwidth_mutex.
+ *
+ * This will call usb_enable_lpm() on failure, which will decrement
+ * lpm_disable_count, and will re-enable LPM if lpm_disable_count reaches zero.
+ */
+int usb_disable_lpm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd;
+
+	if (!udev || !udev->parent ||
+			udev->speed < USB_SPEED_SUPER ||
+			!udev->lpm_capable ||
+			udev->state < USB_STATE_CONFIGURED)
+		return 0;
+
+	hcd = bus_to_hcd(udev->bus);
+	if (!hcd || !hcd->driver->disable_usb3_lpm_timeout)
+		return 0;
+
+	udev->lpm_disable_count++;
+	if ((udev->u1_params.timeout == 0 && udev->u2_params.timeout == 0))
+		return 0;
+
+	/* If LPM is enabled, attempt to disable it. */
+	if (usb_disable_link_state(hcd, udev, USB3_LPM_U1))
+		goto enable_lpm;
+	if (usb_disable_link_state(hcd, udev, USB3_LPM_U2))
+		goto enable_lpm;
+
+	return 0;
+
+enable_lpm:
+	usb_enable_lpm(udev);
+	return -EBUSY;
+}
+EXPORT_SYMBOL_GPL(usb_disable_lpm);
+
+/* Grab the bandwidth_mutex before calling usb_disable_lpm() */
+int usb_unlocked_disable_lpm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+	int ret;
+
+	if (!hcd)
+		return -EINVAL;
+
+	mutex_lock(hcd->bandwidth_mutex);
+	ret = usb_disable_lpm(udev);
+	mutex_unlock(hcd->bandwidth_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_unlocked_disable_lpm);
+
+/*
+ * Attempt to enable device-initiated and hub-initiated U1 and U2 entry.  The
+ * xHCI host policy may prevent U1 or U2 from being enabled.
+ *
+ * Other callers may have disabled link PM, so U1 and U2 entry will be disabled
+ * until the lpm_disable_count drops to zero.  Caller must own the
+ * bandwidth_mutex.
+ */
+void usb_enable_lpm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd;
+	struct usb_hub *hub;
+	struct usb_port *port_dev;
+
+	if (!udev || !udev->parent ||
+			udev->speed < USB_SPEED_SUPER ||
+			!udev->lpm_capable ||
+			udev->state < USB_STATE_CONFIGURED)
+		return;
+
+	udev->lpm_disable_count--;
+	hcd = bus_to_hcd(udev->bus);
+	/* Double check that we can both enable and disable LPM.
+	 * Device must be configured to accept set feature U1/U2 timeout.
+	 */
+	if (!hcd || !hcd->driver->enable_usb3_lpm_timeout ||
+			!hcd->driver->disable_usb3_lpm_timeout)
+		return;
+
+	if (udev->lpm_disable_count > 0)
+		return;
+
+	hub = usb_hub_to_struct_hub(udev->parent);
+	if (!hub)
+		return;
+
+	port_dev = hub->ports[udev->portnum - 1];
+
+	if (port_dev->usb3_lpm_u1_permit)
+		usb_enable_link_state(hcd, udev, USB3_LPM_U1);
+
+	if (port_dev->usb3_lpm_u2_permit)
+		usb_enable_link_state(hcd, udev, USB3_LPM_U2);
+}
+EXPORT_SYMBOL_GPL(usb_enable_lpm);
+
+/* Grab the bandwidth_mutex before calling usb_enable_lpm() */
+void usb_unlocked_enable_lpm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	if (!hcd)
+		return;
+
+	mutex_lock(hcd->bandwidth_mutex);
+	usb_enable_lpm(udev);
+	mutex_unlock(hcd->bandwidth_mutex);
+}
+EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm);
+
+/* usb3 devices use U3 for disabled, make sure remote wakeup is disabled */
+static void hub_usb3_port_prepare_disable(struct usb_hub *hub,
+					  struct usb_port *port_dev)
+{
+	struct usb_device *udev = port_dev->child;
+	int ret;
+
+	if (udev && udev->port_is_suspended && udev->do_remote_wakeup) {
+		ret = hub_set_port_link_state(hub, port_dev->portnum,
+					      USB_SS_PORT_LS_U0);
+		if (!ret) {
+			msleep(USB_RESUME_TIMEOUT);
+			ret = usb_disable_remote_wakeup(udev);
+		}
+		if (ret)
+			dev_warn(&udev->dev,
+				 "Port disable: can't disable remote wake\n");
+		udev->do_remote_wakeup = 0;
+	}
+}
+
+#else	/* CONFIG_PM */
+
+#define hub_suspend		NULL
+#define hub_resume		NULL
+#define hub_reset_resume	NULL
+
+static inline void hub_usb3_port_prepare_disable(struct usb_hub *hub,
+						 struct usb_port *port_dev) { }
+
+int usb_disable_lpm(struct usb_device *udev)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_disable_lpm);
+
+void usb_enable_lpm(struct usb_device *udev) { }
+EXPORT_SYMBOL_GPL(usb_enable_lpm);
+
+int usb_unlocked_disable_lpm(struct usb_device *udev)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_unlocked_disable_lpm);
+
+void usb_unlocked_enable_lpm(struct usb_device *udev) { }
+EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm);
+
+int usb_disable_ltm(struct usb_device *udev)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_disable_ltm);
+
+void usb_enable_ltm(struct usb_device *udev) { }
+EXPORT_SYMBOL_GPL(usb_enable_ltm);
+
+static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
+		u16 portstatus, u16 portchange)
+{
+	return 0;
+}
+
+static int usb_req_set_sel(struct usb_device *udev)
+{
+	return 0;
+}
+
+#endif	/* CONFIG_PM */
+
+/*
+ * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
+ * a connection with a plugged-in cable but will signal the host when the cable
+ * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
+ */
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
+{
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	struct usb_device *hdev = hub->hdev;
+	int ret = 0;
+
+	if (!hub->error) {
+		if (hub_is_superspeed(hub->hdev)) {
+			hub_usb3_port_prepare_disable(hub, port_dev);
+			ret = hub_set_port_link_state(hub, port_dev->portnum,
+						      USB_SS_PORT_LS_U3);
+		} else {
+			ret = usb_clear_port_feature(hdev, port1,
+					USB_PORT_FEAT_ENABLE);
+		}
+	}
+	if (port_dev->child && set_state)
+		usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
+	if (ret && ret != -ENODEV)
+		dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
+	return ret;
+}
+
+/*
+ * usb_port_disable - disable a usb device's upstream port
+ * @udev: device to disable
+ * Context: @udev locked, must be able to sleep.
+ *
+ * Disables a USB device that isn't in active use.
+ */
+int usb_port_disable(struct usb_device *udev)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
+
+	return hub_port_disable(hub, udev->portnum, 0);
+}
+
+/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
+ *
+ * Between connect detection and reset signaling there must be a delay
+ * of 100ms at least for debounce and power-settling.  The corresponding
+ * timer shall restart whenever the downstream port detects a disconnect.
+ *
+ * Apparently there are some bluetooth and irda-dongles and a number of
+ * low-speed devices for which this debounce period may last over a second.
+ * Not covered by the spec - but easy to deal with.
+ *
+ * This implementation uses a 1500ms total debounce timeout; if the
+ * connection isn't stable by then it returns -ETIMEDOUT.  It checks
+ * every 25ms for transient disconnects.  When the port status has been
+ * unchanged for 100ms it returns the port status.
+ */
+int hub_port_debounce(struct usb_hub *hub, int port1, bool must_be_connected)
+{
+	int ret;
+	u16 portchange, portstatus;
+	unsigned connection = 0xffff;
+	int total_time, stable_time = 0;
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+
+	for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
+		ret = usb_hub_port_status(hub, port1, &portstatus, &portchange);
+		if (ret < 0)
+			return ret;
+
+		if (!(portchange & USB_PORT_STAT_C_CONNECTION) &&
+		     (portstatus & USB_PORT_STAT_CONNECTION) == connection) {
+			if (!must_be_connected ||
+			     (connection == USB_PORT_STAT_CONNECTION))
+				stable_time += HUB_DEBOUNCE_STEP;
+			if (stable_time >= HUB_DEBOUNCE_STABLE)
+				break;
+		} else {
+			stable_time = 0;
+			connection = portstatus & USB_PORT_STAT_CONNECTION;
+		}
+
+		if (portchange & USB_PORT_STAT_C_CONNECTION) {
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_CONNECTION);
+		}
+
+		if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+			break;
+		msleep(HUB_DEBOUNCE_STEP);
+	}
+
+	dev_dbg(&port_dev->dev, "debounce total %dms stable %dms status 0x%x\n",
+			total_time, stable_time, portstatus);
+
+	if (stable_time < HUB_DEBOUNCE_STABLE)
+		return -ETIMEDOUT;
+	return portstatus;
+}
+
+void usb_ep0_reinit(struct usb_device *udev)
+{
+	usb_disable_endpoint(udev, 0 + USB_DIR_IN, true);
+	usb_disable_endpoint(udev, 0 + USB_DIR_OUT, true);
+	usb_enable_endpoint(udev, &udev->ep0, true);
+}
+EXPORT_SYMBOL_GPL(usb_ep0_reinit);
+
+#define usb_sndaddr0pipe()	(PIPE_CONTROL << 30)
+#define usb_rcvaddr0pipe()	((PIPE_CONTROL << 30) | USB_DIR_IN)
+
+static int hub_set_address(struct usb_device *udev, int devnum)
+{
+	int retval;
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	/*
+	 * The host controller will choose the device address,
+	 * instead of the core having chosen it earlier
+	 */
+	if (!hcd->driver->address_device && devnum <= 1)
+		return -EINVAL;
+	if (udev->state == USB_STATE_ADDRESS)
+		return 0;
+	if (udev->state != USB_STATE_DEFAULT)
+		return -EINVAL;
+	if (hcd->driver->address_device)
+		retval = hcd->driver->address_device(hcd, udev);
+	else
+		retval = usb_control_msg(udev, usb_sndaddr0pipe(),
+				USB_REQ_SET_ADDRESS, 0, devnum, 0,
+				NULL, 0, USB_CTRL_SET_TIMEOUT);
+	if (retval == 0) {
+		update_devnum(udev, devnum);
+		/* Device now using proper address. */
+		usb_set_device_state(udev, USB_STATE_ADDRESS);
+		usb_ep0_reinit(udev);
+	}
+	return retval;
+}
+
+/*
+ * There are reports of USB 3.0 devices that say they support USB 2.0 Link PM
+ * when they're plugged into a USB 2.0 port, but they don't work when LPM is
+ * enabled.
+ *
+ * Only enable USB 2.0 Link PM if the port is internal (hardwired), or the
+ * device says it supports the new USB 2.0 Link PM errata by setting the BESL
+ * support bit in the BOS descriptor.
+ */
+static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
+	int connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN;
+
+	if (!udev->usb2_hw_lpm_capable || !udev->bos)
+		return;
+
+	if (hub)
+		connect_type = hub->ports[udev->portnum - 1]->connect_type;
+
+	if ((udev->bos->ext_cap->bmAttributes & cpu_to_le32(USB_BESL_SUPPORT)) ||
+			connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
+		udev->usb2_hw_lpm_allowed = 1;
+		usb_enable_usb2_hardware_lpm(udev);
+	}
+}
+
+static int hub_enable_device(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	if (!hcd->driver->enable_device)
+		return 0;
+	if (udev->state == USB_STATE_ADDRESS)
+		return 0;
+	if (udev->state != USB_STATE_DEFAULT)
+		return -EINVAL;
+
+	return hcd->driver->enable_device(hcd, udev);
+}
+
+/*
+ * Get the bMaxPacketSize0 value during initialization by reading the
+ * device's device descriptor.  Since we don't already know this value,
+ * the transfer is unsafe and it ignores I/O errors, only testing for
+ * reasonable received values.
+ *
+ * For "old scheme" initialization, size will be 8 so we read just the
+ * start of the device descriptor, which should work okay regardless of
+ * the actual bMaxPacketSize0 value.  For "new scheme" initialization,
+ * size will be 64 (and buf will point to a sufficiently large buffer),
+ * which might not be kosher according to the USB spec but it's what
+ * Windows does and what many devices expect.
+ *
+ * Returns: bMaxPacketSize0 or a negative error code.
+ */
+static int get_bMaxPacketSize0(struct usb_device *udev,
+		struct usb_device_descriptor *buf, int size, bool first_time)
+{
+	int i, rc;
+
+	/*
+	 * Retry on all errors; some devices are flakey.
+	 * 255 is for WUSB devices, we actually need to use
+	 * 512 (WUSB1.0[4.8.1]).
+	 */
+	for (i = 0; i < GET_MAXPACKET0_TRIES; ++i) {
+		/* Start with invalid values in case the transfer fails */
+		buf->bDescriptorType = buf->bMaxPacketSize0 = 0;
+		rc = usb_control_msg(udev, usb_rcvaddr0pipe(),
+				USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
+				USB_DT_DEVICE << 8, 0,
+				buf, size,
+				initial_descriptor_timeout);
+		switch (buf->bMaxPacketSize0) {
+		case 8: case 16: case 32: case 64: case 9:
+			if (buf->bDescriptorType == USB_DT_DEVICE) {
+				rc = buf->bMaxPacketSize0;
+				break;
+			}
+			fallthrough;
+		default:
+			if (rc >= 0)
+				rc = -EPROTO;
+			break;
+		}
+
+		/*
+		 * Some devices time out if they are powered on
+		 * when already connected. They need a second
+		 * reset, so return early. But only on the first
+		 * attempt, lest we get into a time-out/reset loop.
+		 */
+		if (rc > 0 || (rc == -ETIMEDOUT && first_time &&
+				udev->speed > USB_SPEED_FULL))
+			break;
+	}
+	return rc;
+}
+
+#define GET_DESCRIPTOR_BUFSIZE	64
+
+/* Reset device, (re)assign address, get device descriptor.
+ * Device connection must be stable, no more debouncing needed.
+ * Returns device in USB_STATE_ADDRESS, except on error.
+ *
+ * If this is called for an already-existing device (as part of
+ * usb_reset_and_verify_device), the caller must own the device lock and
+ * the port lock.  For a newly detected device that is not accessible
+ * through any global pointers, it's not necessary to lock the device,
+ * but it is still necessary to lock the port.
+ *
+ * For a newly detected device, @dev_descr must be NULL.  The device
+ * descriptor retrieved from the device will then be stored in
+ * @udev->descriptor.  For an already existing device, @dev_descr
+ * must be non-NULL.  The device descriptor will be stored there,
+ * not in @udev->descriptor, because descriptors for registered
+ * devices are meant to be immutable.
+ */
+static int
+hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
+		int retry_counter, struct usb_device_descriptor *dev_descr)
+{
+	struct usb_device	*hdev = hub->hdev;
+	struct usb_hcd		*hcd = bus_to_hcd(hdev->bus);
+	struct usb_port		*port_dev = hub->ports[port1 - 1];
+	int			retries, operations, retval, i;
+	unsigned		delay = HUB_SHORT_RESET_TIME;
+	enum usb_device_speed	oldspeed = udev->speed;
+	const char		*speed;
+	int			devnum = udev->devnum;
+	const char		*driver_name;
+	bool			do_new_scheme;
+	const bool		initial = !dev_descr;
+	int			maxp0;
+	struct usb_device_descriptor	*buf, *descr;
+
+	buf = kmalloc(GET_DESCRIPTOR_BUFSIZE, GFP_NOIO);
+	if (!buf)
+		return -ENOMEM;
+
+	/* root hub ports have a slightly longer reset period
+	 * (from USB 2.0 spec, section 7.1.7.5)
+	 */
+	if (!hdev->parent) {
+		delay = HUB_ROOT_RESET_TIME;
+		if (port1 == hdev->bus->otg_port)
+			hdev->bus->b_hnp_enable = 0;
+	}
+
+	/* Some low speed devices have problems with the quick delay, so */
+	/*  be a bit pessimistic with those devices. RHbug #23670 */
+	if (oldspeed == USB_SPEED_LOW)
+		delay = HUB_LONG_RESET_TIME;
+
+	/* Reset the device; full speed may morph to high speed */
+	/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
+	retval = hub_port_reset(hub, port1, udev, delay, false);
+	if (retval < 0)		/* error or disconnect */
+		goto fail;
+	/* success, speed is known */
+
+	retval = -ENODEV;
+
+	/* Don't allow speed changes at reset, except usb 3.0 to faster */
+	if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed &&
+	    !(oldspeed == USB_SPEED_SUPER && udev->speed > oldspeed)) {
+		dev_dbg(&udev->dev, "device reset changed speed!\n");
+		goto fail;
+	}
+	oldspeed = udev->speed;
+
+	if (initial) {
+		/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
+		 * it's fixed size except for full speed devices.
+		 * For Wireless USB devices, ep0 max packet is always 512 (tho
+		 * reported as 0xff in the device descriptor). WUSB1.0[4.8.1].
+		 */
+		switch (udev->speed) {
+		case USB_SPEED_SUPER_PLUS:
+		case USB_SPEED_SUPER:
+		case USB_SPEED_WIRELESS:	/* fixed at 512 */
+			udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
+			break;
+		case USB_SPEED_HIGH:		/* fixed at 64 */
+			udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
+			break;
+		case USB_SPEED_FULL:		/* 8, 16, 32, or 64 */
+			/* to determine the ep0 maxpacket size, try to read
+			 * the device descriptor to get bMaxPacketSize0 and
+			 * then correct our initial guess.
+			 */
+			udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
+			break;
+		case USB_SPEED_LOW:		/* fixed at 8 */
+			udev->ep0.desc.wMaxPacketSize = cpu_to_le16(8);
+			break;
+		default:
+			goto fail;
+		}
+	}
+
+	if (udev->speed == USB_SPEED_WIRELESS)
+		speed = "variable speed Wireless";
+	else
+		speed = usb_speed_string(udev->speed);
+
+	/*
+	 * The controller driver may be NULL if the controller device
+	 * is the middle device between platform device and roothub.
+	 * This middle device may not need a device driver due to
+	 * all hardware control can be at platform device driver, this
+	 * platform device is usually a dual-role USB controller device.
+	 */
+	if (udev->bus->controller->driver)
+		driver_name = udev->bus->controller->driver->name;
+	else
+		driver_name = udev->bus->sysdev->driver->name;
+
+	if (udev->speed < USB_SPEED_SUPER)
+		dev_info(&udev->dev,
+				"%s %s USB device number %d using %s\n",
+				(initial ? "new" : "reset"), speed,
+				devnum, driver_name);
+
+	if (initial) {
+		/* Set up TT records, if needed  */
+		if (hdev->tt) {
+			udev->tt = hdev->tt;
+			udev->ttport = hdev->ttport;
+		} else if (udev->speed != USB_SPEED_HIGH
+				&& hdev->speed == USB_SPEED_HIGH) {
+			if (!hub->tt.hub) {
+				dev_err(&udev->dev, "parent hub has no TT\n");
+				retval = -EINVAL;
+				goto fail;
+			}
+			udev->tt = &hub->tt;
+			udev->ttport = port1;
+		}
+	}
+
+	/* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
+	 * Because device hardware and firmware is sometimes buggy in
+	 * this area, and this is how Linux has done it for ages.
+	 * Change it cautiously.
+	 *
+	 * NOTE:  If use_new_scheme() is true we will start by issuing
+	 * a 64-byte GET_DESCRIPTOR request.  This is what Windows does,
+	 * so it may help with some non-standards-compliant devices.
+	 * Otherwise we start with SET_ADDRESS and then try to read the
+	 * first 8 bytes of the device descriptor to get the ep0 maxpacket
+	 * value.
+	 */
+	do_new_scheme = use_new_scheme(udev, retry_counter, port_dev);
+
+	for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) {
+		if (do_new_scheme) {
+			retval = hub_enable_device(udev);
+			if (retval < 0) {
+				dev_err(&udev->dev,
+					"hub failed to enable device, error %d\n",
+					retval);
+				goto fail;
+			}
+
+			maxp0 = get_bMaxPacketSize0(udev, buf,
+					GET_DESCRIPTOR_BUFSIZE, retries == 0);
+			if (maxp0 > 0 && !initial &&
+					maxp0 != udev->descriptor.bMaxPacketSize0) {
+				dev_err(&udev->dev, "device reset changed ep0 maxpacket size!\n");
+				retval = -ENODEV;
+				goto fail;
+			}
+
+			retval = hub_port_reset(hub, port1, udev, delay, false);
+			if (retval < 0)		/* error or disconnect */
+				goto fail;
+			if (oldspeed != udev->speed) {
+				dev_dbg(&udev->dev,
+					"device reset changed speed!\n");
+				retval = -ENODEV;
+				goto fail;
+			}
+			if (maxp0 < 0) {
+				if (maxp0 != -ENODEV)
+					dev_err(&udev->dev, "device descriptor read/64, error %d\n",
+							maxp0);
+				retval = maxp0;
+				continue;
+			}
+		}
+
+		/*
+		 * If device is WUSB, we already assigned an
+		 * unauthorized address in the Connect Ack sequence;
+		 * authorization will assign the final address.
+		 */
+		if (udev->wusb == 0) {
+			for (operations = 0; operations < SET_ADDRESS_TRIES; ++operations) {
+				retval = hub_set_address(udev, devnum);
+				if (retval >= 0)
+					break;
+				msleep(200);
+			}
+			if (retval < 0) {
+				if (retval != -ENODEV)
+					dev_err(&udev->dev, "device not accepting address %d, error %d\n",
+							devnum, retval);
+				goto fail;
+			}
+			if (udev->speed >= USB_SPEED_SUPER) {
+				devnum = udev->devnum;
+				dev_info(&udev->dev,
+						"%s SuperSpeed%s%s USB device number %d using %s\n",
+						(udev->config) ? "reset" : "new",
+					 (udev->speed == USB_SPEED_SUPER_PLUS) ?
+							" Plus" : "",
+					 (udev->ssp_rate == USB_SSP_GEN_2x2) ?
+							" Gen 2x2" :
+					 (udev->ssp_rate == USB_SSP_GEN_2x1) ?
+							" Gen 2x1" :
+					 (udev->ssp_rate == USB_SSP_GEN_1x2) ?
+							" Gen 1x2" : "",
+					 devnum, driver_name);
+			}
+
+			/* cope with hardware quirkiness:
+			 *  - let SET_ADDRESS settle, some device hardware wants it
+			 *  - read ep0 maxpacket even for high and low speed,
+			 */
+			msleep(10);
+			if (do_new_scheme)
+				break;
+		}
+
+		/* !do_new_scheme || wusb */
+		maxp0 = get_bMaxPacketSize0(udev, buf, 8, retries == 0);
+		if (maxp0 < 0) {
+			retval = maxp0;
+			if (retval != -ENODEV)
+				dev_err(&udev->dev,
+					"device descriptor read/8, error %d\n",
+					retval);
+		} else {
+			u32 delay;
+
+			if (!initial && maxp0 != udev->descriptor.bMaxPacketSize0) {
+				dev_err(&udev->dev, "device reset changed ep0 maxpacket size!\n");
+				retval = -ENODEV;
+				goto fail;
+			}
+
+			delay = udev->parent->hub_delay;
+			udev->hub_delay = min_t(u32, delay,
+						USB_TP_TRANSMISSION_DELAY_MAX);
+			retval = usb_set_isoch_delay(udev);
+			if (retval) {
+				dev_dbg(&udev->dev,
+					"Failed set isoch delay, error %d\n",
+					retval);
+				retval = 0;
+			}
+			break;
+		}
+	}
+	if (retval)
+		goto fail;
+
+	/*
+	 * Check the ep0 maxpacket guess and correct it if necessary.
+	 * maxp0 is the value stored in the device descriptor;
+	 * i is the value it encodes (logarithmic for SuperSpeed or greater).
+	 */
+	i = maxp0;
+	if (udev->speed >= USB_SPEED_SUPER) {
+		if (maxp0 <= 16)
+			i = 1 << maxp0;
+		else
+			i = 0;		/* Invalid */
+	}
+	if (usb_endpoint_maxp(&udev->ep0.desc) == i) {
+		;	/* Initial ep0 maxpacket guess is right */
+	} else if ((udev->speed == USB_SPEED_FULL ||
+				udev->speed == USB_SPEED_HIGH) &&
+			(i == 8 || i == 16 || i == 32 || i == 64)) {
+		/* Initial guess is wrong; use the descriptor's value */
+		if (udev->speed == USB_SPEED_FULL)
+			dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i);
+		else
+			dev_warn(&udev->dev, "Using ep0 maxpacket: %d\n", i);
+		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
+		usb_ep0_reinit(udev);
+	} else {
+		/* Initial guess is wrong and descriptor's value is invalid */
+		dev_err(&udev->dev, "Invalid ep0 maxpacket: %d\n", maxp0);
+		retval = -EMSGSIZE;
+		goto fail;
+	}
+
+	descr = usb_get_device_descriptor(udev);
+	if (IS_ERR(descr)) {
+		retval = PTR_ERR(descr);
+		if (retval != -ENODEV)
+			dev_err(&udev->dev, "device descriptor read/all, error %d\n",
+					retval);
+		goto fail;
+	}
+	if (initial)
+		udev->descriptor = *descr;
+	else
+		*dev_descr = *descr;
+	kfree(descr);
+
+	/*
+	 * Some superspeed devices have finished the link training process
+	 * and attached to a superspeed hub port, but the device descriptor
+	 * got from those devices show they aren't superspeed devices. Warm
+	 * reset the port attached by the devices can fix them.
+	 */
+	if ((udev->speed >= USB_SPEED_SUPER) &&
+			(le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) {
+		dev_err(&udev->dev, "got a wrong device descriptor, warm reset device\n");
+		hub_port_reset(hub, port1, udev, HUB_BH_RESET_TIME, true);
+		retval = -EINVAL;
+		goto fail;
+	}
+
+	usb_detect_quirks(udev);
+
+	if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
+		retval = usb_get_bos_descriptor(udev);
+		if (!retval) {
+			udev->lpm_capable = usb_device_supports_lpm(udev);
+			udev->lpm_disable_count = 1;
+			usb_set_lpm_parameters(udev);
+			usb_req_set_sel(udev);
+		}
+	}
+
+	retval = 0;
+	/* notify HCD that we have a device connected and addressed */
+	if (hcd->driver->update_device)
+		hcd->driver->update_device(hcd, udev);
+	hub_set_initial_usb2_lpm_policy(udev);
+fail:
+	if (retval) {
+		hub_port_disable(hub, port1, 0);
+		update_devnum(udev, devnum);	/* for disconnect processing */
+	}
+	kfree(buf);
+	return retval;
+}
+
+static void
+check_highspeed(struct usb_hub *hub, struct usb_device *udev, int port1)
+{
+	struct usb_qualifier_descriptor	*qual;
+	int				status;
+
+	if (udev->quirks & USB_QUIRK_DEVICE_QUALIFIER)
+		return;
+
+	qual = kmalloc(sizeof *qual, GFP_KERNEL);
+	if (qual == NULL)
+		return;
+
+	status = usb_get_descriptor(udev, USB_DT_DEVICE_QUALIFIER, 0,
+			qual, sizeof *qual);
+	if (status == sizeof *qual) {
+		dev_info(&udev->dev, "not running at top speed; "
+			"connect to a high speed hub\n");
+		/* hub LEDs are probably harder to miss than syslog */
+		if (hub->has_indicators) {
+			hub->indicator[port1-1] = INDICATOR_GREEN_BLINK;
+			queue_delayed_work(system_power_efficient_wq,
+					&hub->leds, 0);
+		}
+	}
+	kfree(qual);
+}
+
+static unsigned
+hub_power_remaining(struct usb_hub *hub)
+{
+	struct usb_device *hdev = hub->hdev;
+	int remaining;
+	int port1;
+
+	if (!hub->limited_power)
+		return 0;
+
+	remaining = hdev->bus_mA - hub->descriptor->bHubContrCurrent;
+	for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
+		struct usb_port *port_dev = hub->ports[port1 - 1];
+		struct usb_device *udev = port_dev->child;
+		unsigned unit_load;
+		int delta;
+
+		if (!udev)
+			continue;
+		if (hub_is_superspeed(udev))
+			unit_load = 150;
+		else
+			unit_load = 100;
+
+		/*
+		 * Unconfigured devices may not use more than one unit load,
+		 * or 8mA for OTG ports
+		 */
+		if (udev->actconfig)
+			delta = usb_get_max_power(udev, udev->actconfig);
+		else if (port1 != udev->bus->otg_port || hdev->parent)
+			delta = unit_load;
+		else
+			delta = 8;
+		if (delta > hub->mA_per_port)
+			dev_warn(&port_dev->dev, "%dmA is over %umA budget!\n",
+					delta, hub->mA_per_port);
+		remaining -= delta;
+	}
+	if (remaining < 0) {
+		dev_warn(hub->intfdev, "%dmA over power budget!\n",
+			-remaining);
+		remaining = 0;
+	}
+	return remaining;
+}
+
+
+static int descriptors_changed(struct usb_device *udev,
+		struct usb_device_descriptor *new_device_descriptor,
+		struct usb_host_bos *old_bos)
+{
+	int		changed = 0;
+	unsigned	index;
+	unsigned	serial_len = 0;
+	unsigned	len;
+	unsigned	old_length;
+	int		length;
+	char		*buf;
+
+	if (memcmp(&udev->descriptor, new_device_descriptor,
+			sizeof(*new_device_descriptor)) != 0)
+		return 1;
+
+	if ((old_bos && !udev->bos) || (!old_bos && udev->bos))
+		return 1;
+	if (udev->bos) {
+		len = le16_to_cpu(udev->bos->desc->wTotalLength);
+		if (len != le16_to_cpu(old_bos->desc->wTotalLength))
+			return 1;
+		if (memcmp(udev->bos->desc, old_bos->desc, len))
+			return 1;
+	}
+
+	/* Since the idVendor, idProduct, and bcdDevice values in the
+	 * device descriptor haven't changed, we will assume the
+	 * Manufacturer and Product strings haven't changed either.
+	 * But the SerialNumber string could be different (e.g., a
+	 * different flash card of the same brand).
+	 */
+	if (udev->serial)
+		serial_len = strlen(udev->serial) + 1;
+
+	len = serial_len;
+	for (index = 0; index < udev->descriptor.bNumConfigurations; index++) {
+		old_length = le16_to_cpu(udev->config[index].desc.wTotalLength);
+		len = max(len, old_length);
+	}
+
+	buf = kmalloc(len, GFP_NOIO);
+	if (!buf)
+		/* assume the worst */
+		return 1;
+
+	for (index = 0; index < udev->descriptor.bNumConfigurations; index++) {
+		old_length = le16_to_cpu(udev->config[index].desc.wTotalLength);
+		length = usb_get_descriptor(udev, USB_DT_CONFIG, index, buf,
+				old_length);
+		if (length != old_length) {
+			dev_dbg(&udev->dev, "config index %d, error %d\n",
+					index, length);
+			changed = 1;
+			break;
+		}
+		if (memcmp(buf, udev->rawdescriptors[index], old_length)
+				!= 0) {
+			dev_dbg(&udev->dev, "config index %d changed (#%d)\n",
+				index,
+				((struct usb_config_descriptor *) buf)->
+					bConfigurationValue);
+			changed = 1;
+			break;
+		}
+	}
+
+	if (!changed && serial_len) {
+		length = usb_string(udev, udev->descriptor.iSerialNumber,
+				buf, serial_len);
+		if (length + 1 != serial_len) {
+			dev_dbg(&udev->dev, "serial string error %d\n",
+					length);
+			changed = 1;
+		} else if (memcmp(buf, udev->serial, length) != 0) {
+			dev_dbg(&udev->dev, "serial string changed\n");
+			changed = 1;
+		}
+	}
+
+	kfree(buf);
+	return changed;
+}
+
+static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
+		u16 portchange)
+{
+	int status = -ENODEV;
+	int i;
+	unsigned unit_load;
+	struct usb_device *hdev = hub->hdev;
+	struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	struct usb_device *udev = port_dev->child;
+	static int unreliable_port = -1;
+	bool retry_locked;
+
+	/* Disconnect any existing devices under this port */
+	if (udev) {
+		if (hcd->usb_phy && !hdev->parent)
+			usb_phy_notify_disconnect(hcd->usb_phy, udev->speed);
+		usb_disconnect(&port_dev->child);
+	}
+
+	/* We can forget about a "removed" device when there's a physical
+	 * disconnect or the connect status changes.
+	 */
+	if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
+			(portchange & USB_PORT_STAT_C_CONNECTION))
+		clear_bit(port1, hub->removed_bits);
+
+	if (portchange & (USB_PORT_STAT_C_CONNECTION |
+				USB_PORT_STAT_C_ENABLE)) {
+		status = hub_port_debounce_be_stable(hub, port1);
+		if (status < 0) {
+			if (status != -ENODEV &&
+				port1 != unreliable_port &&
+				printk_ratelimit())
+				dev_err(&port_dev->dev, "connect-debounce failed\n");
+			portstatus &= ~USB_PORT_STAT_CONNECTION;
+			unreliable_port = port1;
+		} else {
+			portstatus = status;
+		}
+	}
+
+	/* Return now if debouncing failed or nothing is connected or
+	 * the device was "removed".
+	 */
+	if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
+			test_bit(port1, hub->removed_bits)) {
+
+		/*
+		 * maybe switch power back on (e.g. root hub was reset)
+		 * but only if the port isn't owned by someone else.
+		 */
+		if (hub_is_port_power_switchable(hub)
+				&& !usb_port_is_power_on(hub, portstatus)
+				&& !port_dev->port_owner)
+			set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
+
+		if (portstatus & USB_PORT_STAT_ENABLE)
+			goto done;
+		return;
+	}
+	if (hub_is_superspeed(hub->hdev))
+		unit_load = 150;
+	else
+		unit_load = 100;
+
+	status = 0;
+
+	for (i = 0; i < PORT_INIT_TRIES; i++) {
+		usb_lock_port(port_dev);
+		mutex_lock(hcd->address0_mutex);
+		retry_locked = true;
+		/* reallocate for each attempt, since references
+		 * to the previous one can escape in various ways
+		 */
+		udev = usb_alloc_dev(hdev, hdev->bus, port1);
+		if (!udev) {
+			dev_err(&port_dev->dev,
+					"couldn't allocate usb_device\n");
+			mutex_unlock(hcd->address0_mutex);
+			usb_unlock_port(port_dev);
+			goto done;
+		}
+
+		usb_set_device_state(udev, USB_STATE_POWERED);
+		udev->bus_mA = hub->mA_per_port;
+		udev->level = hdev->level + 1;
+		udev->wusb = hub_is_wusb(hub);
+
+		/* Devices connected to SuperSpeed hubs are USB 3.0 or later */
+		if (hub_is_superspeed(hub->hdev))
+			udev->speed = USB_SPEED_SUPER;
+		else
+			udev->speed = USB_SPEED_UNKNOWN;
+
+		choose_devnum(udev);
+		if (udev->devnum <= 0) {
+			status = -ENOTCONN;	/* Don't retry */
+			goto loop;
+		}
+
+		/* reset (non-USB 3.0 devices) and get descriptor */
+		status = hub_port_init(hub, udev, port1, i, NULL);
+		if (status < 0)
+			goto loop;
+
+		mutex_unlock(hcd->address0_mutex);
+		usb_unlock_port(port_dev);
+		retry_locked = false;
+
+		if (udev->quirks & USB_QUIRK_DELAY_INIT)
+			msleep(2000);
+
+		/* consecutive bus-powered hubs aren't reliable; they can
+		 * violate the voltage drop budget.  if the new child has
+		 * a "powered" LED, users should notice we didn't enable it
+		 * (without reading syslog), even without per-port LEDs
+		 * on the parent.
+		 */
+		if (udev->descriptor.bDeviceClass == USB_CLASS_HUB
+				&& udev->bus_mA <= unit_load) {
+			u16	devstat;
+
+			status = usb_get_std_status(udev, USB_RECIP_DEVICE, 0,
+					&devstat);
+			if (status) {
+				dev_dbg(&udev->dev, "get status %d ?\n", status);
+				goto loop_disable;
+			}
+			if ((devstat & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
+				dev_err(&udev->dev,
+					"can't connect bus-powered hub "
+					"to this port\n");
+				if (hub->has_indicators) {
+					hub->indicator[port1-1] =
+						INDICATOR_AMBER_BLINK;
+					queue_delayed_work(
+						system_power_efficient_wq,
+						&hub->leds, 0);
+				}
+				status = -ENOTCONN;	/* Don't retry */
+				goto loop_disable;
+			}
+		}
+
+		/* check for devices running slower than they could */
+		if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
+				&& udev->speed == USB_SPEED_FULL
+				&& highspeed_hubs != 0)
+			check_highspeed(hub, udev, port1);
+
+		/* Store the parent's children[] pointer.  At this point
+		 * udev becomes globally accessible, although presumably
+		 * no one will look at it until hdev is unlocked.
+		 */
+		status = 0;
+
+		mutex_lock(&usb_port_peer_mutex);
+
+		/* We mustn't add new devices if the parent hub has
+		 * been disconnected; we would race with the
+		 * recursively_mark_NOTATTACHED() routine.
+		 */
+		spin_lock_irq(&device_state_lock);
+		if (hdev->state == USB_STATE_NOTATTACHED)
+			status = -ENOTCONN;
+		else
+			port_dev->child = udev;
+		spin_unlock_irq(&device_state_lock);
+		mutex_unlock(&usb_port_peer_mutex);
+
+		/* Run it through the hoops (find a driver, etc) */
+		if (!status) {
+			status = usb_new_device(udev);
+			if (status) {
+				mutex_lock(&usb_port_peer_mutex);
+				spin_lock_irq(&device_state_lock);
+				port_dev->child = NULL;
+				spin_unlock_irq(&device_state_lock);
+				mutex_unlock(&usb_port_peer_mutex);
+			} else {
+				if (hcd->usb_phy && !hdev->parent)
+					usb_phy_notify_connect(hcd->usb_phy,
+							udev->speed);
+			}
+		}
+
+		if (status)
+			goto loop_disable;
+
+		status = hub_power_remaining(hub);
+		if (status)
+			dev_dbg(hub->intfdev, "%dmA power budget left\n", status);
+
+		return;
+
+loop_disable:
+		hub_port_disable(hub, port1, 1);
+loop:
+		usb_ep0_reinit(udev);
+		release_devnum(udev);
+		hub_free_dev(udev);
+		if (retry_locked) {
+			mutex_unlock(hcd->address0_mutex);
+			usb_unlock_port(port_dev);
+		}
+		usb_put_dev(udev);
+		if ((status == -ENOTCONN) || (status == -ENOTSUPP))
+			break;
+
+		/* When halfway through our retry count, power-cycle the port */
+		if (i == (PORT_INIT_TRIES - 1) / 2) {
+			dev_info(&port_dev->dev, "attempt power cycle\n");
+			usb_hub_set_port_power(hdev, hub, port1, false);
+			msleep(2 * hub_power_on_good_delay(hub));
+			usb_hub_set_port_power(hdev, hub, port1, true);
+			msleep(hub_power_on_good_delay(hub));
+		}
+	}
+	if (hub->hdev->parent ||
+			!hcd->driver->port_handed_over ||
+			!(hcd->driver->port_handed_over)(hcd, port1)) {
+		if (status != -ENOTCONN && status != -ENODEV)
+			dev_err(&port_dev->dev,
+					"unable to enumerate USB device\n");
+	}
+
+done:
+	hub_port_disable(hub, port1, 1);
+	if (hcd->driver->relinquish_port && !hub->hdev->parent) {
+		if (status != -ENOTCONN && status != -ENODEV)
+			hcd->driver->relinquish_port(hcd, port1);
+	}
+}
+
+/* Handle physical or logical connection change events.
+ * This routine is called when:
+ *	a port connection-change occurs;
+ *	a port enable-change occurs (often caused by EMI);
+ *	usb_reset_and_verify_device() encounters changed descriptors (as from
+ *		a firmware download)
+ * caller already locked the hub
+ */
+static void hub_port_connect_change(struct usb_hub *hub, int port1,
+					u16 portstatus, u16 portchange)
+		__must_hold(&port_dev->status_lock)
+{
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	struct usb_device *udev = port_dev->child;
+	struct usb_device_descriptor *descr;
+	int status = -ENODEV;
+
+	dev_dbg(&port_dev->dev, "status %04x, change %04x, %s\n", portstatus,
+			portchange, portspeed(hub, portstatus));
+
+	if (hub->has_indicators) {
+		set_port_led(hub, port1, HUB_LED_AUTO);
+		hub->indicator[port1-1] = INDICATOR_AUTO;
+	}
+
+#ifdef	CONFIG_USB_OTG
+	/* during HNP, don't repeat the debounce */
+	if (hub->hdev->bus->is_b_host)
+		portchange &= ~(USB_PORT_STAT_C_CONNECTION |
+				USB_PORT_STAT_C_ENABLE);
+#endif
+
+	/* Try to resuscitate an existing device */
+	if ((portstatus & USB_PORT_STAT_CONNECTION) && udev &&
+			udev->state != USB_STATE_NOTATTACHED) {
+		if (portstatus & USB_PORT_STAT_ENABLE) {
+			/*
+			 * USB-3 connections are initialized automatically by
+			 * the hostcontroller hardware. Therefore check for
+			 * changed device descriptors before resuscitating the
+			 * device.
+			 */
+			descr = usb_get_device_descriptor(udev);
+			if (IS_ERR(descr)) {
+				dev_dbg(&udev->dev,
+						"can't read device descriptor %ld\n",
+						PTR_ERR(descr));
+			} else {
+				if (descriptors_changed(udev, descr,
+						udev->bos)) {
+					dev_dbg(&udev->dev,
+							"device descriptor has changed\n");
+				} else {
+					status = 0; /* Nothing to do */
+				}
+				kfree(descr);
+			}
+#ifdef CONFIG_PM
+		} else if (udev->state == USB_STATE_SUSPENDED &&
+				udev->persist_enabled) {
+			/* For a suspended device, treat this as a
+			 * remote wakeup event.
+			 */
+			usb_unlock_port(port_dev);
+			status = usb_remote_wakeup(udev);
+			usb_lock_port(port_dev);
+#endif
+		} else {
+			/* Don't resuscitate */;
+		}
+	}
+	clear_bit(port1, hub->change_bits);
+
+	/* successfully revalidated the connection */
+	if (status == 0)
+		return;
+
+	usb_unlock_port(port_dev);
+	hub_port_connect(hub, port1, portstatus, portchange);
+	usb_lock_port(port_dev);
+}
+
+/* Handle notifying userspace about hub over-current events */
+static void port_over_current_notify(struct usb_port *port_dev)
+{
+	char *envp[3] = { NULL, NULL, NULL };
+	struct device *hub_dev;
+	char *port_dev_path;
+
+	sysfs_notify(&port_dev->dev.kobj, NULL, "over_current_count");
+
+	hub_dev = port_dev->dev.parent;
+
+	if (!hub_dev)
+		return;
+
+	port_dev_path = kobject_get_path(&port_dev->dev.kobj, GFP_KERNEL);
+	if (!port_dev_path)
+		return;
+
+	envp[0] = kasprintf(GFP_KERNEL, "OVER_CURRENT_PORT=%s", port_dev_path);
+	if (!envp[0])
+		goto exit;
+
+	envp[1] = kasprintf(GFP_KERNEL, "OVER_CURRENT_COUNT=%u",
+			port_dev->over_current_count);
+	if (!envp[1])
+		goto exit;
+
+	kobject_uevent_env(&hub_dev->kobj, KOBJ_CHANGE, envp);
+
+exit:
+	kfree(envp[1]);
+	kfree(envp[0]);
+	kfree(port_dev_path);
+}
+
+static void port_event(struct usb_hub *hub, int port1)
+		__must_hold(&port_dev->status_lock)
+{
+	int connect_change;
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	struct usb_device *udev = port_dev->child;
+	struct usb_device *hdev = hub->hdev;
+	u16 portstatus, portchange;
+	int i = 0;
+
+	connect_change = test_bit(port1, hub->change_bits);
+	clear_bit(port1, hub->event_bits);
+	clear_bit(port1, hub->wakeup_bits);
+
+	if (usb_hub_port_status(hub, port1, &portstatus, &portchange) < 0)
+		return;
+
+	if (portchange & USB_PORT_STAT_C_CONNECTION) {
+		usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
+		connect_change = 1;
+	}
+
+	if (portchange & USB_PORT_STAT_C_ENABLE) {
+		if (!connect_change)
+			dev_dbg(&port_dev->dev, "enable change, status %08x\n",
+					portstatus);
+		usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE);
+
+		/*
+		 * EM interference sometimes causes badly shielded USB devices
+		 * to be shutdown by the hub, this hack enables them again.
+		 * Works at least with mouse driver.
+		 */
+		if (!(portstatus & USB_PORT_STAT_ENABLE)
+		    && !connect_change && udev) {
+			dev_err(&port_dev->dev, "disabled by hub (EMI?), re-enabling...\n");
+			connect_change = 1;
+		}
+	}
+
+	if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
+		u16 status = 0, unused;
+		port_dev->over_current_count++;
+		port_over_current_notify(port_dev);
+
+		dev_dbg(&port_dev->dev, "over-current change #%u\n",
+			port_dev->over_current_count);
+		usb_clear_port_feature(hdev, port1,
+				USB_PORT_FEAT_C_OVER_CURRENT);
+		msleep(100);	/* Cool down */
+		hub_power_on(hub, true);
+		usb_hub_port_status(hub, port1, &status, &unused);
+		if (status & USB_PORT_STAT_OVERCURRENT)
+			dev_err(&port_dev->dev, "over-current condition\n");
+	}
+
+	if (portchange & USB_PORT_STAT_C_RESET) {
+		dev_dbg(&port_dev->dev, "reset change\n");
+		usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_RESET);
+	}
+	if ((portchange & USB_PORT_STAT_C_BH_RESET)
+	    && hub_is_superspeed(hdev)) {
+		dev_dbg(&port_dev->dev, "warm reset change\n");
+		usb_clear_port_feature(hdev, port1,
+				USB_PORT_FEAT_C_BH_PORT_RESET);
+	}
+	if (portchange & USB_PORT_STAT_C_LINK_STATE) {
+		dev_dbg(&port_dev->dev, "link state change\n");
+		usb_clear_port_feature(hdev, port1,
+				USB_PORT_FEAT_C_PORT_LINK_STATE);
+	}
+	if (portchange & USB_PORT_STAT_C_CONFIG_ERROR) {
+		dev_warn(&port_dev->dev, "config error\n");
+		usb_clear_port_feature(hdev, port1,
+				USB_PORT_FEAT_C_PORT_CONFIG_ERROR);
+	}
+
+	/* skip port actions that require the port to be powered on */
+	if (!pm_runtime_active(&port_dev->dev))
+		return;
+
+	if (hub_handle_remote_wakeup(hub, port1, portstatus, portchange))
+		connect_change = 1;
+
+	/*
+	 * Avoid trying to recover a USB3 SS.Inactive port with a warm reset if
+	 * the device was disconnected. A 12ms disconnect detect timer in
+	 * SS.Inactive state transitions the port to RxDetect automatically.
+	 * SS.Inactive link error state is common during device disconnect.
+	 */
+	while (hub_port_warm_reset_required(hub, port1, portstatus)) {
+		if ((i++ < DETECT_DISCONNECT_TRIES) && udev) {
+			u16 unused;
+
+			msleep(20);
+			usb_hub_port_status(hub, port1, &portstatus, &unused);
+			dev_dbg(&port_dev->dev, "Wait for inactive link disconnect detect\n");
+			continue;
+		} else if (!udev || !(portstatus & USB_PORT_STAT_CONNECTION)
+				|| udev->state == USB_STATE_NOTATTACHED) {
+			dev_dbg(&port_dev->dev, "do warm reset, port only\n");
+			if (hub_port_reset(hub, port1, NULL,
+					HUB_BH_RESET_TIME, true) < 0)
+				hub_port_disable(hub, port1, 1);
+		} else {
+			dev_dbg(&port_dev->dev, "do warm reset, full device\n");
+			usb_unlock_port(port_dev);
+			usb_lock_device(udev);
+			usb_reset_device(udev);
+			usb_unlock_device(udev);
+			usb_lock_port(port_dev);
+			connect_change = 0;
+		}
+		break;
+	}
+
+	if (connect_change)
+		hub_port_connect_change(hub, port1, portstatus, portchange);
+}
+
+static void hub_event(struct work_struct *work)
+{
+	struct usb_device *hdev;
+	struct usb_interface *intf;
+	struct usb_hub *hub;
+	struct device *hub_dev;
+	u16 hubstatus;
+	u16 hubchange;
+	int i, ret;
+
+	hub = container_of(work, struct usb_hub, events);
+	hdev = hub->hdev;
+	hub_dev = hub->intfdev;
+	intf = to_usb_interface(hub_dev);
+
+	kcov_remote_start_usb((u64)hdev->bus->busnum);
+
+	dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
+			hdev->state, hdev->maxchild,
+			/* NOTE: expects max 15 ports... */
+			(u16) hub->change_bits[0],
+			(u16) hub->event_bits[0]);
+
+	/* Lock the device, then check to see if we were
+	 * disconnected while waiting for the lock to succeed. */
+	usb_lock_device(hdev);
+	if (unlikely(hub->disconnected))
+		goto out_hdev_lock;
+
+	/* If the hub has died, clean up after it */
+	if (hdev->state == USB_STATE_NOTATTACHED) {
+		hub->error = -ENODEV;
+		hub_quiesce(hub, HUB_DISCONNECT);
+		goto out_hdev_lock;
+	}
+
+	/* Autoresume */
+	ret = usb_autopm_get_interface(intf);
+	if (ret) {
+		dev_dbg(hub_dev, "Can't autoresume: %d\n", ret);
+		goto out_hdev_lock;
+	}
+
+	/* If this is an inactive hub, do nothing */
+	if (hub->quiescing)
+		goto out_autopm;
+
+	if (hub->error) {
+		dev_dbg(hub_dev, "resetting for error %d\n", hub->error);
+
+		ret = usb_reset_device(hdev);
+		if (ret) {
+			dev_dbg(hub_dev, "error resetting hub: %d\n", ret);
+			goto out_autopm;
+		}
+
+		hub->nerrors = 0;
+		hub->error = 0;
+	}
+
+	/* deal with port status changes */
+	for (i = 1; i <= hdev->maxchild; i++) {
+		struct usb_port *port_dev = hub->ports[i - 1];
+
+		if (test_bit(i, hub->event_bits)
+				|| test_bit(i, hub->change_bits)
+				|| test_bit(i, hub->wakeup_bits)) {
+			/*
+			 * The get_noresume and barrier ensure that if
+			 * the port was in the process of resuming, we
+			 * flush that work and keep the port active for
+			 * the duration of the port_event().  However,
+			 * if the port is runtime pm suspended
+			 * (powered-off), we leave it in that state, run
+			 * an abbreviated port_event(), and move on.
+			 */
+			pm_runtime_get_noresume(&port_dev->dev);
+			pm_runtime_barrier(&port_dev->dev);
+			usb_lock_port(port_dev);
+			port_event(hub, i);
+			usb_unlock_port(port_dev);
+			pm_runtime_put_sync(&port_dev->dev);
+		}
+	}
+
+	/* deal with hub status changes */
+	if (test_and_clear_bit(0, hub->event_bits) == 0)
+		;	/* do nothing */
+	else if (hub_hub_status(hub, &hubstatus, &hubchange) < 0)
+		dev_err(hub_dev, "get_hub_status failed\n");
+	else {
+		if (hubchange & HUB_CHANGE_LOCAL_POWER) {
+			dev_dbg(hub_dev, "power change\n");
+			clear_hub_feature(hdev, C_HUB_LOCAL_POWER);
+			if (hubstatus & HUB_STATUS_LOCAL_POWER)
+				/* FIXME: Is this always true? */
+				hub->limited_power = 1;
+			else
+				hub->limited_power = 0;
+		}
+		if (hubchange & HUB_CHANGE_OVERCURRENT) {
+			u16 status = 0;
+			u16 unused;
+
+			dev_dbg(hub_dev, "over-current change\n");
+			clear_hub_feature(hdev, C_HUB_OVER_CURRENT);
+			msleep(500);	/* Cool down */
+			hub_power_on(hub, true);
+			hub_hub_status(hub, &status, &unused);
+			if (status & HUB_STATUS_OVERCURRENT)
+				dev_err(hub_dev, "over-current condition\n");
+		}
+	}
+
+out_autopm:
+	/* Balance the usb_autopm_get_interface() above */
+	usb_autopm_put_interface_no_suspend(intf);
+out_hdev_lock:
+	usb_unlock_device(hdev);
+
+	/* Balance the stuff in kick_hub_wq() and allow autosuspend */
+	usb_autopm_put_interface(intf);
+	kref_put(&hub->kref, hub_release);
+
+	kcov_remote_stop();
+}
+
+static const struct usb_device_id hub_id_table[] = {
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+                   | USB_DEVICE_ID_MATCH_PRODUCT
+                   | USB_DEVICE_ID_MATCH_INT_CLASS,
+      .idVendor = USB_VENDOR_SMSC,
+      .idProduct = USB_PRODUCT_USB5534B,
+      .bInterfaceClass = USB_CLASS_HUB,
+      .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+                   | USB_DEVICE_ID_MATCH_PRODUCT,
+      .idVendor = USB_VENDOR_CYPRESS,
+      .idProduct = USB_PRODUCT_CY7C65632,
+      .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+			| USB_DEVICE_ID_MATCH_INT_CLASS,
+      .idVendor = USB_VENDOR_GENESYS_LOGIC,
+      .bInterfaceClass = USB_CLASS_HUB,
+      .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND},
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+			| USB_DEVICE_ID_MATCH_PRODUCT,
+      .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS,
+      .idProduct = USB_PRODUCT_TUSB8041_USB2,
+      .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+			| USB_DEVICE_ID_MATCH_PRODUCT,
+      .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS,
+      .idProduct = USB_PRODUCT_TUSB8041_USB3,
+      .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
+    { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
+      .bDeviceClass = USB_CLASS_HUB},
+    { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
+      .bInterfaceClass = USB_CLASS_HUB},
+    { }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, hub_id_table);
+
+static struct usb_driver hub_driver = {
+	.name =		"hub",
+	.probe =	hub_probe,
+	.disconnect =	hub_disconnect,
+	.suspend =	hub_suspend,
+	.resume =	hub_resume,
+	.reset_resume =	hub_reset_resume,
+	.pre_reset =	hub_pre_reset,
+	.post_reset =	hub_post_reset,
+	.unlocked_ioctl = hub_ioctl,
+	.id_table =	hub_id_table,
+	.supports_autosuspend =	1,
+};
+
+int usb_hub_init(void)
+{
+	if (usb_register(&hub_driver) < 0) {
+		printk(KERN_ERR "%s: can't register hub driver\n",
+			usbcore_name);
+		return -1;
+	}
+
+	/*
+	 * The workqueue needs to be freezable to avoid interfering with
+	 * USB-PERSIST port handover. Otherwise it might see that a full-speed
+	 * device was gone before the EHCI controller had handed its port
+	 * over to the companion full-speed controller.
+	 */
+	hub_wq = alloc_workqueue("usb_hub_wq", WQ_FREEZABLE, 0);
+	if (hub_wq)
+		return 0;
+
+	/* Fall through if kernel_thread failed */
+	usb_deregister(&hub_driver);
+	pr_err("%s: can't allocate workqueue for usb hub\n", usbcore_name);
+
+	return -1;
+}
+
+void usb_hub_cleanup(void)
+{
+	destroy_workqueue(hub_wq);
+
+	/*
+	 * Hub resources are freed for us by usb_deregister. It calls
+	 * usb_driver_purge on every device which in turn calls that
+	 * devices disconnect function if it is using this driver.
+	 * The hub_disconnect function takes care of releasing the
+	 * individual hub resources. -greg
+	 */
+	usb_deregister(&hub_driver);
+} /* usb_hub_cleanup() */
+
+/**
+ * usb_reset_and_verify_device - perform a USB port reset to reinitialize a device
+ * @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
+ *
+ * WARNING - don't use this routine to reset a composite device
+ * (one with multiple interfaces owned by separate drivers)!
+ * Use usb_reset_device() instead.
+ *
+ * Do a port reset, reassign the device's address, and establish its
+ * former operating configuration.  If the reset fails, or the device's
+ * descriptors change from their values before the reset, or the original
+ * configuration and altsettings cannot be restored, a flag will be set
+ * telling hub_wq to pretend the device has been disconnected and then
+ * re-connected.  All drivers will be unbound, and the device will be
+ * re-enumerated and probed all over again.
+ *
+ * Return: 0 if the reset succeeded, -ENODEV if the device has been
+ * flagged for logical disconnection, or some other negative error code
+ * if the reset wasn't even attempted.
+ *
+ * Note:
+ * The caller must own the device lock and the port lock, the latter is
+ * taken by usb_reset_device().  For example, it's safe to use
+ * usb_reset_device() from a driver probe() routine after downloading
+ * new firmware.  For calls that might not occur during probe(), drivers
+ * should lock the device using usb_lock_device_for_reset().
+ *
+ * Locking exception: This routine may also be called from within an
+ * autoresume handler.  Such usage won't conflict with other tasks
+ * holding the device lock because these tasks should always call
+ * usb_autopm_resume_device(), thereby preventing any unwanted
+ * autoresume.  The autoresume handler is expected to have already
+ * acquired the port lock before calling this routine.
+ */
+static int usb_reset_and_verify_device(struct usb_device *udev)
+{
+	struct usb_device		*parent_hdev = udev->parent;
+	struct usb_hub			*parent_hub;
+	struct usb_hcd			*hcd = bus_to_hcd(udev->bus);
+	struct usb_device_descriptor	descriptor;
+	struct usb_host_bos		*bos;
+	int				i, j, ret = 0;
+	int				port1 = udev->portnum;
+
+	if (udev->state == USB_STATE_NOTATTACHED ||
+			udev->state == USB_STATE_SUSPENDED) {
+		dev_dbg(&udev->dev, "device reset not allowed in state %d\n",
+				udev->state);
+		return -EINVAL;
+	}
+
+	if (!parent_hdev)
+		return -EISDIR;
+
+	parent_hub = usb_hub_to_struct_hub(parent_hdev);
+
+	/* Disable USB2 hardware LPM.
+	 * It will be re-enabled by the enumeration process.
+	 */
+	usb_disable_usb2_hardware_lpm(udev);
+
+	bos = udev->bos;
+	udev->bos = NULL;
+
+	mutex_lock(hcd->address0_mutex);
+
+	for (i = 0; i < PORT_INIT_TRIES; ++i) {
+
+		/* ep0 maxpacket size may change; let the HCD know about it.
+		 * Other endpoints will be handled by re-enumeration. */
+		usb_ep0_reinit(udev);
+		ret = hub_port_init(parent_hub, udev, port1, i, &descriptor);
+		if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV)
+			break;
+	}
+	mutex_unlock(hcd->address0_mutex);
+
+	if (ret < 0)
+		goto re_enumerate;
+
+	/* Device might have changed firmware (DFU or similar) */
+	if (descriptors_changed(udev, &descriptor, bos)) {
+		dev_info(&udev->dev, "device firmware changed\n");
+		goto re_enumerate;
+	}
+
+	/* Restore the device's previous configuration */
+	if (!udev->actconfig)
+		goto done;
+
+	mutex_lock(hcd->bandwidth_mutex);
+	ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL);
+	if (ret < 0) {
+		dev_warn(&udev->dev,
+				"Busted HC?  Not enough HCD resources for "
+				"old configuration.\n");
+		mutex_unlock(hcd->bandwidth_mutex);
+		goto re_enumerate;
+	}
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			USB_REQ_SET_CONFIGURATION, 0,
+			udev->actconfig->desc.bConfigurationValue, 0,
+			NULL, 0, USB_CTRL_SET_TIMEOUT);
+	if (ret < 0) {
+		dev_err(&udev->dev,
+			"can't restore configuration #%d (error=%d)\n",
+			udev->actconfig->desc.bConfigurationValue, ret);
+		mutex_unlock(hcd->bandwidth_mutex);
+		goto re_enumerate;
+	}
+	mutex_unlock(hcd->bandwidth_mutex);
+	usb_set_device_state(udev, USB_STATE_CONFIGURED);
+
+	/* Put interfaces back into the same altsettings as before.
+	 * Don't bother to send the Set-Interface request for interfaces
+	 * that were already in altsetting 0; besides being unnecessary,
+	 * many devices can't handle it.  Instead just reset the host-side
+	 * endpoint state.
+	 */
+	for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+		struct usb_host_config *config = udev->actconfig;
+		struct usb_interface *intf = config->interface[i];
+		struct usb_interface_descriptor *desc;
+
+		desc = &intf->cur_altsetting->desc;
+		if (desc->bAlternateSetting == 0) {
+			usb_disable_interface(udev, intf, true);
+			usb_enable_interface(udev, intf, true);
+			ret = 0;
+		} else {
+			/* Let the bandwidth allocation function know that this
+			 * device has been reset, and it will have to use
+			 * alternate setting 0 as the current alternate setting.
+			 */
+			intf->resetting_device = 1;
+			ret = usb_set_interface(udev, desc->bInterfaceNumber,
+					desc->bAlternateSetting);
+			intf->resetting_device = 0;
+		}
+		if (ret < 0) {
+			dev_err(&udev->dev, "failed to restore interface %d "
+				"altsetting %d (error=%d)\n",
+				desc->bInterfaceNumber,
+				desc->bAlternateSetting,
+				ret);
+			goto re_enumerate;
+		}
+		/* Resetting also frees any allocated streams */
+		for (j = 0; j < intf->cur_altsetting->desc.bNumEndpoints; j++)
+			intf->cur_altsetting->endpoint[j].streams = 0;
+	}
+
+done:
+	/* Now that the alt settings are re-installed, enable LTM and LPM. */
+	usb_enable_usb2_hardware_lpm(udev);
+	usb_unlocked_enable_lpm(udev);
+	usb_enable_ltm(udev);
+	usb_release_bos_descriptor(udev);
+	udev->bos = bos;
+	return 0;
+
+re_enumerate:
+	usb_release_bos_descriptor(udev);
+	udev->bos = bos;
+	hub_port_logical_disconnect(parent_hub, port1);
+	return -ENODEV;
+}
+
+/**
+ * usb_reset_device - warn interface drivers and perform a USB port reset
+ * @udev: device to reset (not in NOTATTACHED state)
+ *
+ * Warns all drivers bound to registered interfaces (using their pre_reset
+ * method), performs the port reset, and then lets the drivers know that
+ * the reset is over (using their post_reset method).
+ *
+ * Return: The same as for usb_reset_and_verify_device().
+ * However, if a reset is already in progress (for instance, if a
+ * driver doesn't have pre_reset() or post_reset() callbacks, and while
+ * being unbound or re-bound during the ongoing reset its disconnect()
+ * or probe() routine tries to perform a second, nested reset), the
+ * routine returns -EINPROGRESS.
+ *
+ * Note:
+ * The caller must own the device lock.  For example, it's safe to use
+ * this from a driver probe() routine after downloading new firmware.
+ * For calls that might not occur during probe(), drivers should lock
+ * the device using usb_lock_device_for_reset().
+ *
+ * If an interface is currently being probed or disconnected, we assume
+ * its driver knows how to handle resets.  For all other interfaces,
+ * if the driver doesn't have pre_reset and post_reset methods then
+ * we attempt to unbind it and rebind afterward.
+ */
+int usb_reset_device(struct usb_device *udev)
+{
+	int ret;
+	int i;
+	unsigned int noio_flag;
+	struct usb_port *port_dev;
+	struct usb_host_config *config = udev->actconfig;
+	struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
+
+	if (udev->state == USB_STATE_NOTATTACHED) {
+		dev_dbg(&udev->dev, "device reset not allowed in state %d\n",
+				udev->state);
+		return -EINVAL;
+	}
+
+	if (!udev->parent) {
+		/* this requires hcd-specific logic; see ohci_restart() */
+		dev_dbg(&udev->dev, "%s for root hub!\n", __func__);
+		return -EISDIR;
+	}
+
+	if (udev->reset_in_progress)
+		return -EINPROGRESS;
+	udev->reset_in_progress = 1;
+
+	port_dev = hub->ports[udev->portnum - 1];
+
+	/*
+	 * Don't allocate memory with GFP_KERNEL in current
+	 * context to avoid possible deadlock if usb mass
+	 * storage interface or usbnet interface(iSCSI case)
+	 * is included in current configuration. The easist
+	 * approach is to do it for every device reset,
+	 * because the device 'memalloc_noio' flag may have
+	 * not been set before reseting the usb device.
+	 */
+	noio_flag = memalloc_noio_save();
+
+	/* Prevent autosuspend during the reset */
+	usb_autoresume_device(udev);
+
+	if (config) {
+		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+			struct usb_interface *cintf = config->interface[i];
+			struct usb_driver *drv;
+			int unbind = 0;
+
+			if (cintf->dev.driver) {
+				drv = to_usb_driver(cintf->dev.driver);
+				if (drv->pre_reset && drv->post_reset)
+					unbind = (drv->pre_reset)(cintf);
+				else if (cintf->condition ==
+						USB_INTERFACE_BOUND)
+					unbind = 1;
+				if (unbind)
+					usb_forced_unbind_intf(cintf);
+			}
+		}
+	}
+
+	usb_lock_port(port_dev);
+	ret = usb_reset_and_verify_device(udev);
+	usb_unlock_port(port_dev);
+
+	if (config) {
+		for (i = config->desc.bNumInterfaces - 1; i >= 0; --i) {
+			struct usb_interface *cintf = config->interface[i];
+			struct usb_driver *drv;
+			int rebind = cintf->needs_binding;
+
+			if (!rebind && cintf->dev.driver) {
+				drv = to_usb_driver(cintf->dev.driver);
+				if (drv->post_reset)
+					rebind = (drv->post_reset)(cintf);
+				else if (cintf->condition ==
+						USB_INTERFACE_BOUND)
+					rebind = 1;
+				if (rebind)
+					cintf->needs_binding = 1;
+			}
+		}
+
+		/* If the reset failed, hub_wq will unbind drivers later */
+		if (ret == 0)
+			usb_unbind_and_rebind_marked_interfaces(udev);
+	}
+
+	usb_autosuspend_device(udev);
+	memalloc_noio_restore(noio_flag);
+	udev->reset_in_progress = 0;
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_reset_device);
+
+
+/**
+ * usb_queue_reset_device - Reset a USB device from an atomic context
+ * @iface: USB interface belonging to the device to reset
+ *
+ * This function can be used to reset a USB device from an atomic
+ * context, where usb_reset_device() won't work (as it blocks).
+ *
+ * Doing a reset via this method is functionally equivalent to calling
+ * usb_reset_device(), except for the fact that it is delayed to a
+ * workqueue. This means that any drivers bound to other interfaces
+ * might be unbound, as well as users from usbfs in user space.
+ *
+ * Corner cases:
+ *
+ * - Scheduling two resets at the same time from two different drivers
+ *   attached to two different interfaces of the same device is
+ *   possible; depending on how the driver attached to each interface
+ *   handles ->pre_reset(), the second reset might happen or not.
+ *
+ * - If the reset is delayed so long that the interface is unbound from
+ *   its driver, the reset will be skipped.
+ *
+ * - This function can be called during .probe().  It can also be called
+ *   during .disconnect(), but doing so is pointless because the reset
+ *   will not occur.  If you really want to reset the device during
+ *   .disconnect(), call usb_reset_device() directly -- but watch out
+ *   for nested unbinding issues!
+ */
+void usb_queue_reset_device(struct usb_interface *iface)
+{
+	if (schedule_work(&iface->reset_ws))
+		usb_get_intf(iface);
+}
+EXPORT_SYMBOL_GPL(usb_queue_reset_device);
+
+/**
+ * usb_hub_find_child - Get the pointer of child device
+ * attached to the port which is specified by @port1.
+ * @hdev: USB device belonging to the usb hub
+ * @port1: port num to indicate which port the child device
+ *	is attached to.
+ *
+ * USB drivers call this function to get hub's child device
+ * pointer.
+ *
+ * Return: %NULL if input param is invalid and
+ * child's usb_device pointer if non-NULL.
+ */
+struct usb_device *usb_hub_find_child(struct usb_device *hdev,
+		int port1)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+
+	if (port1 < 1 || port1 > hdev->maxchild)
+		return NULL;
+	return hub->ports[port1 - 1]->child;
+}
+EXPORT_SYMBOL_GPL(usb_hub_find_child);
+
+void usb_hub_adjust_deviceremovable(struct usb_device *hdev,
+		struct usb_hub_descriptor *desc)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+	enum usb_port_connect_type connect_type;
+	int i;
+
+	if (!hub)
+		return;
+
+	if (!hub_is_superspeed(hdev)) {
+		for (i = 1; i <= hdev->maxchild; i++) {
+			struct usb_port *port_dev = hub->ports[i - 1];
+
+			connect_type = port_dev->connect_type;
+			if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
+				u8 mask = 1 << (i%8);
+
+				if (!(desc->u.hs.DeviceRemovable[i/8] & mask)) {
+					dev_dbg(&port_dev->dev, "DeviceRemovable is changed to 1 according to platform information.\n");
+					desc->u.hs.DeviceRemovable[i/8]	|= mask;
+				}
+			}
+		}
+	} else {
+		u16 port_removable = le16_to_cpu(desc->u.ss.DeviceRemovable);
+
+		for (i = 1; i <= hdev->maxchild; i++) {
+			struct usb_port *port_dev = hub->ports[i - 1];
+
+			connect_type = port_dev->connect_type;
+			if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
+				u16 mask = 1 << i;
+
+				if (!(port_removable & mask)) {
+					dev_dbg(&port_dev->dev, "DeviceRemovable is changed to 1 according to platform information.\n");
+					port_removable |= mask;
+				}
+			}
+		}
+
+		desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable);
+	}
+}
+
+#ifdef CONFIG_ACPI
+/**
+ * usb_get_hub_port_acpi_handle - Get the usb port's acpi handle
+ * @hdev: USB device belonging to the usb hub
+ * @port1: port num of the port
+ *
+ * Return: Port's acpi handle if successful, %NULL if params are
+ * invalid.
+ */
+acpi_handle usb_get_hub_port_acpi_handle(struct usb_device *hdev,
+	int port1)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+
+	if (!hub)
+		return NULL;
+
+	return ACPI_HANDLE(&hub->ports[port1 - 1]->dev);
+}
+#endif
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
new file mode 100644
index 000000000..bc66205ca
--- /dev/null
+++ b/drivers/usb/core/hub.h
@@ -0,0 +1,171 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * usb hub driver head file
+ *
+ * Copyright (C) 1999 Linus Torvalds
+ * Copyright (C) 1999 Johannes Erdfelt
+ * Copyright (C) 1999 Gregory P. Smith
+ * Copyright (C) 2001 Brad Hards (bhards@bigpond.net.au)
+ * Copyright (C) 2012 Intel Corp (tianyu.lan@intel.com)
+ *
+ *  move struct usb_hub to this file.
+ */
+
+#include <linux/usb.h>
+#include <linux/usb/ch11.h>
+#include <linux/usb/hcd.h>
+#include "usb.h"
+
+struct usb_hub {
+	struct device		*intfdev;	/* the "interface" device */
+	struct usb_device	*hdev;
+	struct kref		kref;
+	struct urb		*urb;		/* for interrupt polling pipe */
+
+	/* buffer for urb ... with extra space in case of babble */
+	u8			(*buffer)[8];
+	union {
+		struct usb_hub_status	hub;
+		struct usb_port_status	port;
+	}			*status;	/* buffer for status reports */
+	struct mutex		status_mutex;	/* for the status buffer */
+
+	int			error;		/* last reported error */
+	int			nerrors;	/* track consecutive errors */
+
+	unsigned long		event_bits[1];	/* status change bitmask */
+	unsigned long		change_bits[1];	/* ports with logical connect
+							status change */
+	unsigned long		removed_bits[1]; /* ports with a "removed"
+							device present */
+	unsigned long		wakeup_bits[1];	/* ports that have signaled
+							remote wakeup */
+	unsigned long		power_bits[1]; /* ports that are powered */
+	unsigned long		child_usage_bits[1]; /* ports powered on for
+							children */
+	unsigned long		warm_reset_bits[1]; /* ports requesting warm
+							reset recovery */
+#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */
+#error event_bits[] is too short!
+#endif
+
+	struct usb_hub_descriptor *descriptor;	/* class descriptor */
+	struct usb_tt		tt;		/* Transaction Translator */
+
+	unsigned		mA_per_port;	/* current for each child */
+#ifdef	CONFIG_PM
+	unsigned		wakeup_enabled_descendants;
+#endif
+
+	unsigned		limited_power:1;
+	unsigned		quiescing:1;
+	unsigned		disconnected:1;
+	unsigned		in_reset:1;
+	unsigned		quirk_disable_autosuspend:1;
+
+	unsigned		quirk_check_port_auto_suspend:1;
+
+	unsigned		has_indicators:1;
+	u8			indicator[USB_MAXCHILDREN];
+	struct delayed_work	leds;
+	struct delayed_work	init_work;
+	struct work_struct      events;
+	spinlock_t		irq_urb_lock;
+	struct timer_list	irq_urb_retry;
+	struct usb_port		**ports;
+	struct list_head        onboard_hub_devs;
+};
+
+/**
+ * struct usb port - kernel's representation of a usb port
+ * @child: usb device attached to the port
+ * @dev: generic device interface
+ * @port_owner: port's owner
+ * @peer: related usb2 and usb3 ports (share the same connector)
+ * @req: default pm qos request for hubs without port power control
+ * @connect_type: port's connect type
+ * @location: opaque representation of platform connector location
+ * @status_lock: synchronize port_event() vs usb_port_{suspend|resume}
+ * @portnum: port index num based one
+ * @is_superspeed cache super-speed status
+ * @usb3_lpm_u1_permit: whether USB3 U1 LPM is permitted.
+ * @usb3_lpm_u2_permit: whether USB3 U2 LPM is permitted.
+ */
+struct usb_port {
+	struct usb_device *child;
+	struct device dev;
+	struct usb_dev_state *port_owner;
+	struct usb_port *peer;
+	struct dev_pm_qos_request *req;
+	enum usb_port_connect_type connect_type;
+	usb_port_location_t location;
+	struct mutex status_lock;
+	u32 over_current_count;
+	u8 portnum;
+	u32 quirks;
+	unsigned int is_superspeed:1;
+	unsigned int usb3_lpm_u1_permit:1;
+	unsigned int usb3_lpm_u2_permit:1;
+};
+
+#define to_usb_port(_dev) \
+	container_of(_dev, struct usb_port, dev)
+
+extern int usb_hub_create_port_device(struct usb_hub *hub,
+		int port1);
+extern void usb_hub_remove_port_device(struct usb_hub *hub,
+		int port1);
+extern int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
+		int port1, bool set);
+extern struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev);
+extern int hub_port_debounce(struct usb_hub *hub, int port1,
+		bool must_be_connected);
+extern int usb_clear_port_feature(struct usb_device *hdev,
+		int port1, int feature);
+extern int usb_hub_port_status(struct usb_hub *hub, int port1,
+		u16 *status, u16 *change);
+extern int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus);
+
+static inline bool hub_is_port_power_switchable(struct usb_hub *hub)
+{
+	__le16 hcs;
+
+	if (!hub)
+		return false;
+	hcs = hub->descriptor->wHubCharacteristics;
+	return (le16_to_cpu(hcs) & HUB_CHAR_LPSM) < HUB_CHAR_NO_LPSM;
+}
+
+static inline int hub_is_superspeed(struct usb_device *hdev)
+{
+	return hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS;
+}
+
+static inline int hub_is_superspeedplus(struct usb_device *hdev)
+{
+	return (hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS &&
+		le16_to_cpu(hdev->descriptor.bcdUSB) >= 0x0310 &&
+		hdev->bos && hdev->bos->ssp_cap);
+}
+
+static inline unsigned hub_power_on_good_delay(struct usb_hub *hub)
+{
+	unsigned delay = hub->descriptor->bPwrOn2PwrGood * 2;
+
+	if (!hub->hdev->parent)	/* root hub */
+		return delay;
+	else /* Wait at least 100 msec for power to become stable */
+		return max(delay, 100U);
+}
+
+static inline int hub_port_debounce_be_connected(struct usb_hub *hub,
+		int port1)
+{
+	return hub_port_debounce(hub, port1, true);
+}
+
+static inline int hub_port_debounce_be_stable(struct usb_hub *hub,
+		int port1)
+{
+	return hub_port_debounce(hub, port1, false);
+}
diff --git a/drivers/usb/core/ledtrig-usbport.c b/drivers/usb/core/ledtrig-usbport.c
new file mode 100644
index 000000000..ba371a24f
--- /dev/null
+++ b/drivers/usb/core/ledtrig-usbport.c
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB port LED trigger
+ *
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/device.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/of.h>
+
+struct usbport_trig_data {
+	struct led_classdev *led_cdev;
+	struct list_head ports;
+	struct notifier_block nb;
+	int count; /* Amount of connected matching devices */
+};
+
+struct usbport_trig_port {
+	struct usbport_trig_data *data;
+	struct usb_device *hub;
+	int portnum;
+	char *port_name;
+	bool observed;
+	struct device_attribute attr;
+	struct list_head list;
+};
+
+/***************************************
+ * Helpers
+ ***************************************/
+
+/*
+ * usbport_trig_usb_dev_observed - Check if dev is connected to observed port
+ */
+static bool usbport_trig_usb_dev_observed(struct usbport_trig_data *usbport_data,
+					  struct usb_device *usb_dev)
+{
+	struct usbport_trig_port *port;
+
+	if (!usb_dev->parent)
+		return false;
+
+	list_for_each_entry(port, &usbport_data->ports, list) {
+		if (usb_dev->parent == port->hub &&
+		    usb_dev->portnum == port->portnum)
+			return port->observed;
+	}
+
+	return false;
+}
+
+static int usbport_trig_usb_dev_check(struct usb_device *usb_dev, void *data)
+{
+	struct usbport_trig_data *usbport_data = data;
+
+	if (usbport_trig_usb_dev_observed(usbport_data, usb_dev))
+		usbport_data->count++;
+
+	return 0;
+}
+
+/*
+ * usbport_trig_update_count - Recalculate amount of connected matching devices
+ */
+static void usbport_trig_update_count(struct usbport_trig_data *usbport_data)
+{
+	struct led_classdev *led_cdev = usbport_data->led_cdev;
+
+	usbport_data->count = 0;
+	usb_for_each_dev(usbport_data, usbport_trig_usb_dev_check);
+	led_set_brightness(led_cdev, usbport_data->count ? LED_FULL : LED_OFF);
+}
+
+/***************************************
+ * Device attr
+ ***************************************/
+
+static ssize_t usbport_trig_port_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct usbport_trig_port *port = container_of(attr,
+						      struct usbport_trig_port,
+						      attr);
+
+	return sprintf(buf, "%d\n", port->observed) + 1;
+}
+
+static ssize_t usbport_trig_port_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t size)
+{
+	struct usbport_trig_port *port = container_of(attr,
+						      struct usbport_trig_port,
+						      attr);
+
+	if (!strcmp(buf, "0") || !strcmp(buf, "0\n"))
+		port->observed = 0;
+	else if (!strcmp(buf, "1") || !strcmp(buf, "1\n"))
+		port->observed = 1;
+	else
+		return -EINVAL;
+
+	usbport_trig_update_count(port->data);
+
+	return size;
+}
+
+static struct attribute *ports_attrs[] = {
+	NULL,
+};
+
+static const struct attribute_group ports_group = {
+	.name = "ports",
+	.attrs = ports_attrs,
+};
+
+/***************************************
+ * Adding & removing ports
+ ***************************************/
+
+/*
+ * usbport_trig_port_observed - Check if port should be observed
+ */
+static bool usbport_trig_port_observed(struct usbport_trig_data *usbport_data,
+				       struct usb_device *usb_dev, int port1)
+{
+	struct device *dev = usbport_data->led_cdev->dev;
+	struct device_node *led_np = dev->of_node;
+	struct of_phandle_args args;
+	struct device_node *port_np;
+	int count, i;
+
+	if (!led_np)
+		return false;
+
+	/*
+	 * Get node of port being added
+	 *
+	 * FIXME: This is really the device node of the connected device
+	 */
+	port_np = usb_of_get_device_node(usb_dev, port1);
+	if (!port_np)
+		return false;
+
+	of_node_put(port_np);
+
+	/* Amount of trigger sources for this LED */
+	count = of_count_phandle_with_args(led_np, "trigger-sources",
+					   "#trigger-source-cells");
+	if (count < 0) {
+		dev_warn(dev, "Failed to get trigger sources for %pOF\n",
+			 led_np);
+		return false;
+	}
+
+	/* Check list of sources for this specific port */
+	for (i = 0; i < count; i++) {
+		int err;
+
+		err = of_parse_phandle_with_args(led_np, "trigger-sources",
+						 "#trigger-source-cells", i,
+						 &args);
+		if (err) {
+			dev_err(dev, "Failed to get trigger source phandle at index %d: %d\n",
+				i, err);
+			continue;
+		}
+
+		of_node_put(args.np);
+
+		if (args.np == port_np)
+			return true;
+	}
+
+	return false;
+}
+
+static int usbport_trig_add_port(struct usbport_trig_data *usbport_data,
+				 struct usb_device *usb_dev,
+				 const char *hub_name, int portnum)
+{
+	struct led_classdev *led_cdev = usbport_data->led_cdev;
+	struct usbport_trig_port *port;
+	size_t len;
+	int err;
+
+	port = kzalloc(sizeof(*port), GFP_KERNEL);
+	if (!port) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	port->data = usbport_data;
+	port->hub = usb_dev;
+	port->portnum = portnum;
+	port->observed = usbport_trig_port_observed(usbport_data, usb_dev,
+						    portnum);
+
+	len = strlen(hub_name) + 8;
+	port->port_name = kzalloc(len, GFP_KERNEL);
+	if (!port->port_name) {
+		err = -ENOMEM;
+		goto err_free_port;
+	}
+	snprintf(port->port_name, len, "%s-port%d", hub_name, portnum);
+
+	sysfs_attr_init(&port->attr.attr);
+	port->attr.attr.name = port->port_name;
+	port->attr.attr.mode = S_IRUSR | S_IWUSR;
+	port->attr.show = usbport_trig_port_show;
+	port->attr.store = usbport_trig_port_store;
+
+	err = sysfs_add_file_to_group(&led_cdev->dev->kobj, &port->attr.attr,
+				      ports_group.name);
+	if (err)
+		goto err_free_port_name;
+
+	list_add_tail(&port->list, &usbport_data->ports);
+
+	return 0;
+
+err_free_port_name:
+	kfree(port->port_name);
+err_free_port:
+	kfree(port);
+err_out:
+	return err;
+}
+
+static int usbport_trig_add_usb_dev_ports(struct usb_device *usb_dev,
+					  void *data)
+{
+	struct usbport_trig_data *usbport_data = data;
+	int i;
+
+	for (i = 1; i <= usb_dev->maxchild; i++)
+		usbport_trig_add_port(usbport_data, usb_dev,
+				      dev_name(&usb_dev->dev), i);
+
+	return 0;
+}
+
+static void usbport_trig_remove_port(struct usbport_trig_data *usbport_data,
+				     struct usbport_trig_port *port)
+{
+	struct led_classdev *led_cdev = usbport_data->led_cdev;
+
+	list_del(&port->list);
+	sysfs_remove_file_from_group(&led_cdev->dev->kobj, &port->attr.attr,
+				     ports_group.name);
+	kfree(port->port_name);
+	kfree(port);
+}
+
+static void usbport_trig_remove_usb_dev_ports(struct usbport_trig_data *usbport_data,
+					      struct usb_device *usb_dev)
+{
+	struct usbport_trig_port *port, *tmp;
+
+	list_for_each_entry_safe(port, tmp, &usbport_data->ports, list) {
+		if (port->hub == usb_dev)
+			usbport_trig_remove_port(usbport_data, port);
+	}
+}
+
+/***************************************
+ * Init, exit, etc.
+ ***************************************/
+
+static int usbport_trig_notify(struct notifier_block *nb, unsigned long action,
+			       void *data)
+{
+	struct usbport_trig_data *usbport_data =
+		container_of(nb, struct usbport_trig_data, nb);
+	struct led_classdev *led_cdev = usbport_data->led_cdev;
+	struct usb_device *usb_dev = data;
+	bool observed;
+
+	observed = usbport_trig_usb_dev_observed(usbport_data, usb_dev);
+
+	switch (action) {
+	case USB_DEVICE_ADD:
+		usbport_trig_add_usb_dev_ports(usb_dev, usbport_data);
+		if (observed && usbport_data->count++ == 0)
+			led_set_brightness(led_cdev, LED_FULL);
+		return NOTIFY_OK;
+	case USB_DEVICE_REMOVE:
+		usbport_trig_remove_usb_dev_ports(usbport_data, usb_dev);
+		if (observed && --usbport_data->count == 0)
+			led_set_brightness(led_cdev, LED_OFF);
+		return NOTIFY_OK;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static int usbport_trig_activate(struct led_classdev *led_cdev)
+{
+	struct usbport_trig_data *usbport_data;
+	int err;
+
+	usbport_data = kzalloc(sizeof(*usbport_data), GFP_KERNEL);
+	if (!usbport_data)
+		return -ENOMEM;
+	usbport_data->led_cdev = led_cdev;
+
+	/* List of ports */
+	INIT_LIST_HEAD(&usbport_data->ports);
+	err = sysfs_create_group(&led_cdev->dev->kobj, &ports_group);
+	if (err)
+		goto err_free;
+	usb_for_each_dev(usbport_data, usbport_trig_add_usb_dev_ports);
+	usbport_trig_update_count(usbport_data);
+
+	/* Notifications */
+	usbport_data->nb.notifier_call = usbport_trig_notify;
+	led_set_trigger_data(led_cdev, usbport_data);
+	usb_register_notify(&usbport_data->nb);
+	return 0;
+
+err_free:
+	kfree(usbport_data);
+	return err;
+}
+
+static void usbport_trig_deactivate(struct led_classdev *led_cdev)
+{
+	struct usbport_trig_data *usbport_data = led_get_trigger_data(led_cdev);
+	struct usbport_trig_port *port, *tmp;
+
+	list_for_each_entry_safe(port, tmp, &usbport_data->ports, list) {
+		usbport_trig_remove_port(usbport_data, port);
+	}
+
+	sysfs_remove_group(&led_cdev->dev->kobj, &ports_group);
+
+	usb_unregister_notify(&usbport_data->nb);
+
+	kfree(usbport_data);
+}
+
+static struct led_trigger usbport_led_trigger = {
+	.name     = "usbport",
+	.activate = usbport_trig_activate,
+	.deactivate = usbport_trig_deactivate,
+};
+
+static int __init usbport_trig_init(void)
+{
+	return led_trigger_register(&usbport_led_trigger);
+}
+
+static void __exit usbport_trig_exit(void)
+{
+	led_trigger_unregister(&usbport_led_trigger);
+}
+
+module_init(usbport_trig_init);
+module_exit(usbport_trig_exit);
+
+MODULE_AUTHOR("Rafał Miłecki <rafal@milecki.pl>");
+MODULE_DESCRIPTION("USB port trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
new file mode 100644
index 000000000..1673e5d08
--- /dev/null
+++ b/drivers/usb/core/message.c
@@ -0,0 +1,2418 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * message.c - synchronous message handling
+ *
+ * Released under the GPLv2 only.
+ */
+
+#include <linux/acpi.h>
+#include <linux/pci.h>	/* for scatterlist macros */
+#include <linux/usb.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/timer.h>
+#include <linux/ctype.h>
+#include <linux/nls.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/quirks.h>
+#include <linux/usb/hcd.h>	/* for usbcore internals */
+#include <linux/usb/of.h>
+#include <asm/byteorder.h>
+
+#include "usb.h"
+
+static void cancel_async_set_config(struct usb_device *udev);
+
+struct api_context {
+	struct completion	done;
+	int			status;
+};
+
+static void usb_api_blocking_completion(struct urb *urb)
+{
+	struct api_context *ctx = urb->context;
+
+	ctx->status = urb->status;
+	complete(&ctx->done);
+}
+
+
+/*
+ * Starts urb and waits for completion or timeout. Note that this call
+ * is NOT interruptible. Many device driver i/o requests should be
+ * interruptible and therefore these drivers should implement their
+ * own interruptible routines.
+ */
+static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length)
+{
+	struct api_context ctx;
+	unsigned long expire;
+	int retval;
+
+	init_completion(&ctx.done);
+	urb->context = &ctx;
+	urb->actual_length = 0;
+	retval = usb_submit_urb(urb, GFP_NOIO);
+	if (unlikely(retval))
+		goto out;
+
+	expire = timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT;
+	if (!wait_for_completion_timeout(&ctx.done, expire)) {
+		usb_kill_urb(urb);
+		retval = (ctx.status == -ENOENT ? -ETIMEDOUT : ctx.status);
+
+		dev_dbg(&urb->dev->dev,
+			"%s timed out on ep%d%s len=%u/%u\n",
+			current->comm,
+			usb_endpoint_num(&urb->ep->desc),
+			usb_urb_dir_in(urb) ? "in" : "out",
+			urb->actual_length,
+			urb->transfer_buffer_length);
+	} else
+		retval = ctx.status;
+out:
+	if (actual_length)
+		*actual_length = urb->actual_length;
+
+	usb_free_urb(urb);
+	return retval;
+}
+
+/*-------------------------------------------------------------------*/
+/* returns status (negative) or length (positive) */
+static int usb_internal_control_msg(struct usb_device *usb_dev,
+				    unsigned int pipe,
+				    struct usb_ctrlrequest *cmd,
+				    void *data, int len, int timeout)
+{
+	struct urb *urb;
+	int retv;
+	int length;
+
+	urb = usb_alloc_urb(0, GFP_NOIO);
+	if (!urb)
+		return -ENOMEM;
+
+	usb_fill_control_urb(urb, usb_dev, pipe, (unsigned char *)cmd, data,
+			     len, usb_api_blocking_completion, NULL);
+
+	retv = usb_start_wait_urb(urb, timeout, &length);
+	if (retv < 0)
+		return retv;
+	else
+		return length;
+}
+
+/**
+ * usb_control_msg - Builds a control urb, sends it off and waits for completion
+ * @dev: pointer to the usb device to send the message to
+ * @pipe: endpoint "pipe" to send the message to
+ * @request: USB message request value
+ * @requesttype: USB message request type value
+ * @value: USB message value
+ * @index: USB message index value
+ * @data: pointer to the data to send
+ * @size: length in bytes of the data to send
+ * @timeout: time in msecs to wait for the message to complete before timing
+ *	out (if 0 the wait is forever)
+ *
+ * Context: task context, might sleep.
+ *
+ * This function sends a simple control message to a specified endpoint and
+ * waits for the message to complete, or timeout.
+ *
+ * Don't use this function from within an interrupt context. If you need
+ * an asynchronous message, or need to send a message from within interrupt
+ * context, use usb_submit_urb(). If a thread in your driver uses this call,
+ * make sure your disconnect() method can wait for it to complete. Since you
+ * don't have a handle on the URB used, you can't cancel the request.
+ *
+ * Return: If successful, the number of bytes transferred. Otherwise, a negative
+ * error number.
+ */
+int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request,
+		    __u8 requesttype, __u16 value, __u16 index, void *data,
+		    __u16 size, int timeout)
+{
+	struct usb_ctrlrequest *dr;
+	int ret;
+
+	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
+	if (!dr)
+		return -ENOMEM;
+
+	dr->bRequestType = requesttype;
+	dr->bRequest = request;
+	dr->wValue = cpu_to_le16(value);
+	dr->wIndex = cpu_to_le16(index);
+	dr->wLength = cpu_to_le16(size);
+
+	ret = usb_internal_control_msg(dev, pipe, dr, data, size, timeout);
+
+	/* Linger a bit, prior to the next control message. */
+	if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG)
+		msleep(200);
+
+	kfree(dr);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_control_msg);
+
+/**
+ * usb_control_msg_send - Builds a control "send" message, sends it off and waits for completion
+ * @dev: pointer to the usb device to send the message to
+ * @endpoint: endpoint to send the message to
+ * @request: USB message request value
+ * @requesttype: USB message request type value
+ * @value: USB message value
+ * @index: USB message index value
+ * @driver_data: pointer to the data to send
+ * @size: length in bytes of the data to send
+ * @timeout: time in msecs to wait for the message to complete before timing
+ *	out (if 0 the wait is forever)
+ * @memflags: the flags for memory allocation for buffers
+ *
+ * Context: !in_interrupt ()
+ *
+ * This function sends a control message to a specified endpoint that is not
+ * expected to fill in a response (i.e. a "send message") and waits for the
+ * message to complete, or timeout.
+ *
+ * Do not use this function from within an interrupt context. If you need
+ * an asynchronous message, or need to send a message from within interrupt
+ * context, use usb_submit_urb(). If a thread in your driver uses this call,
+ * make sure your disconnect() method can wait for it to complete. Since you
+ * don't have a handle on the URB used, you can't cancel the request.
+ *
+ * The data pointer can be made to a reference on the stack, or anywhere else,
+ * as it will not be modified at all.  This does not have the restriction that
+ * usb_control_msg() has where the data pointer must be to dynamically allocated
+ * memory (i.e. memory that can be successfully DMAed to a device).
+ *
+ * Return: If successful, 0 is returned, Otherwise, a negative error number.
+ */
+int usb_control_msg_send(struct usb_device *dev, __u8 endpoint, __u8 request,
+			 __u8 requesttype, __u16 value, __u16 index,
+			 const void *driver_data, __u16 size, int timeout,
+			 gfp_t memflags)
+{
+	unsigned int pipe = usb_sndctrlpipe(dev, endpoint);
+	int ret;
+	u8 *data = NULL;
+
+	if (size) {
+		data = kmemdup(driver_data, size, memflags);
+		if (!data)
+			return -ENOMEM;
+	}
+
+	ret = usb_control_msg(dev, pipe, request, requesttype, value, index,
+			      data, size, timeout);
+	kfree(data);
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_control_msg_send);
+
+/**
+ * usb_control_msg_recv - Builds a control "receive" message, sends it off and waits for completion
+ * @dev: pointer to the usb device to send the message to
+ * @endpoint: endpoint to send the message to
+ * @request: USB message request value
+ * @requesttype: USB message request type value
+ * @value: USB message value
+ * @index: USB message index value
+ * @driver_data: pointer to the data to be filled in by the message
+ * @size: length in bytes of the data to be received
+ * @timeout: time in msecs to wait for the message to complete before timing
+ *	out (if 0 the wait is forever)
+ * @memflags: the flags for memory allocation for buffers
+ *
+ * Context: !in_interrupt ()
+ *
+ * This function sends a control message to a specified endpoint that is
+ * expected to fill in a response (i.e. a "receive message") and waits for the
+ * message to complete, or timeout.
+ *
+ * Do not use this function from within an interrupt context. If you need
+ * an asynchronous message, or need to send a message from within interrupt
+ * context, use usb_submit_urb(). If a thread in your driver uses this call,
+ * make sure your disconnect() method can wait for it to complete. Since you
+ * don't have a handle on the URB used, you can't cancel the request.
+ *
+ * The data pointer can be made to a reference on the stack, or anywhere else
+ * that can be successfully written to.  This function does not have the
+ * restriction that usb_control_msg() has where the data pointer must be to
+ * dynamically allocated memory (i.e. memory that can be successfully DMAed to a
+ * device).
+ *
+ * The "whole" message must be properly received from the device in order for
+ * this function to be successful.  If a device returns less than the expected
+ * amount of data, then the function will fail.  Do not use this for messages
+ * where a variable amount of data might be returned.
+ *
+ * Return: If successful, 0 is returned, Otherwise, a negative error number.
+ */
+int usb_control_msg_recv(struct usb_device *dev, __u8 endpoint, __u8 request,
+			 __u8 requesttype, __u16 value, __u16 index,
+			 void *driver_data, __u16 size, int timeout,
+			 gfp_t memflags)
+{
+	unsigned int pipe = usb_rcvctrlpipe(dev, endpoint);
+	int ret;
+	u8 *data;
+
+	if (!size || !driver_data)
+		return -EINVAL;
+
+	data = kmalloc(size, memflags);
+	if (!data)
+		return -ENOMEM;
+
+	ret = usb_control_msg(dev, pipe, request, requesttype, value, index,
+			      data, size, timeout);
+
+	if (ret < 0)
+		goto exit;
+
+	if (ret == size) {
+		memcpy(driver_data, data, size);
+		ret = 0;
+	} else {
+		ret = -EREMOTEIO;
+	}
+
+exit:
+	kfree(data);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_control_msg_recv);
+
+/**
+ * usb_interrupt_msg - Builds an interrupt urb, sends it off and waits for completion
+ * @usb_dev: pointer to the usb device to send the message to
+ * @pipe: endpoint "pipe" to send the message to
+ * @data: pointer to the data to send
+ * @len: length in bytes of the data to send
+ * @actual_length: pointer to a location to put the actual length transferred
+ *	in bytes
+ * @timeout: time in msecs to wait for the message to complete before
+ *	timing out (if 0 the wait is forever)
+ *
+ * Context: task context, might sleep.
+ *
+ * This function sends a simple interrupt message to a specified endpoint and
+ * waits for the message to complete, or timeout.
+ *
+ * Don't use this function from within an interrupt context. If you need
+ * an asynchronous message, or need to send a message from within interrupt
+ * context, use usb_submit_urb() If a thread in your driver uses this call,
+ * make sure your disconnect() method can wait for it to complete. Since you
+ * don't have a handle on the URB used, you can't cancel the request.
+ *
+ * Return:
+ * If successful, 0. Otherwise a negative error number. The number of actual
+ * bytes transferred will be stored in the @actual_length parameter.
+ */
+int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe,
+		      void *data, int len, int *actual_length, int timeout)
+{
+	return usb_bulk_msg(usb_dev, pipe, data, len, actual_length, timeout);
+}
+EXPORT_SYMBOL_GPL(usb_interrupt_msg);
+
+/**
+ * usb_bulk_msg - Builds a bulk urb, sends it off and waits for completion
+ * @usb_dev: pointer to the usb device to send the message to
+ * @pipe: endpoint "pipe" to send the message to
+ * @data: pointer to the data to send
+ * @len: length in bytes of the data to send
+ * @actual_length: pointer to a location to put the actual length transferred
+ *	in bytes
+ * @timeout: time in msecs to wait for the message to complete before
+ *	timing out (if 0 the wait is forever)
+ *
+ * Context: task context, might sleep.
+ *
+ * This function sends a simple bulk message to a specified endpoint
+ * and waits for the message to complete, or timeout.
+ *
+ * Don't use this function from within an interrupt context. If you need
+ * an asynchronous message, or need to send a message from within interrupt
+ * context, use usb_submit_urb() If a thread in your driver uses this call,
+ * make sure your disconnect() method can wait for it to complete. Since you
+ * don't have a handle on the URB used, you can't cancel the request.
+ *
+ * Because there is no usb_interrupt_msg() and no USBDEVFS_INTERRUPT ioctl,
+ * users are forced to abuse this routine by using it to submit URBs for
+ * interrupt endpoints.  We will take the liberty of creating an interrupt URB
+ * (with the default interval) if the target is an interrupt endpoint.
+ *
+ * Return:
+ * If successful, 0. Otherwise a negative error number. The number of actual
+ * bytes transferred will be stored in the @actual_length parameter.
+ *
+ */
+int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
+		 void *data, int len, int *actual_length, int timeout)
+{
+	struct urb *urb;
+	struct usb_host_endpoint *ep;
+
+	ep = usb_pipe_endpoint(usb_dev, pipe);
+	if (!ep || len < 0)
+		return -EINVAL;
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+
+	if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+			USB_ENDPOINT_XFER_INT) {
+		pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
+		usb_fill_int_urb(urb, usb_dev, pipe, data, len,
+				usb_api_blocking_completion, NULL,
+				ep->desc.bInterval);
+	} else
+		usb_fill_bulk_urb(urb, usb_dev, pipe, data, len,
+				usb_api_blocking_completion, NULL);
+
+	return usb_start_wait_urb(urb, timeout, actual_length);
+}
+EXPORT_SYMBOL_GPL(usb_bulk_msg);
+
+/*-------------------------------------------------------------------*/
+
+static void sg_clean(struct usb_sg_request *io)
+{
+	if (io->urbs) {
+		while (io->entries--)
+			usb_free_urb(io->urbs[io->entries]);
+		kfree(io->urbs);
+		io->urbs = NULL;
+	}
+	io->dev = NULL;
+}
+
+static void sg_complete(struct urb *urb)
+{
+	unsigned long flags;
+	struct usb_sg_request *io = urb->context;
+	int status = urb->status;
+
+	spin_lock_irqsave(&io->lock, flags);
+
+	/* In 2.5 we require hcds' endpoint queues not to progress after fault
+	 * reports, until the completion callback (this!) returns.  That lets
+	 * device driver code (like this routine) unlink queued urbs first,
+	 * if it needs to, since the HC won't work on them at all.  So it's
+	 * not possible for page N+1 to overwrite page N, and so on.
+	 *
+	 * That's only for "hard" faults; "soft" faults (unlinks) sometimes
+	 * complete before the HCD can get requests away from hardware,
+	 * though never during cleanup after a hard fault.
+	 */
+	if (io->status
+			&& (io->status != -ECONNRESET
+				|| status != -ECONNRESET)
+			&& urb->actual_length) {
+		dev_err(io->dev->bus->controller,
+			"dev %s ep%d%s scatterlist error %d/%d\n",
+			io->dev->devpath,
+			usb_endpoint_num(&urb->ep->desc),
+			usb_urb_dir_in(urb) ? "in" : "out",
+			status, io->status);
+		/* BUG (); */
+	}
+
+	if (io->status == 0 && status && status != -ECONNRESET) {
+		int i, found, retval;
+
+		io->status = status;
+
+		/* the previous urbs, and this one, completed already.
+		 * unlink pending urbs so they won't rx/tx bad data.
+		 * careful: unlink can sometimes be synchronous...
+		 */
+		spin_unlock_irqrestore(&io->lock, flags);
+		for (i = 0, found = 0; i < io->entries; i++) {
+			if (!io->urbs[i])
+				continue;
+			if (found) {
+				usb_block_urb(io->urbs[i]);
+				retval = usb_unlink_urb(io->urbs[i]);
+				if (retval != -EINPROGRESS &&
+				    retval != -ENODEV &&
+				    retval != -EBUSY &&
+				    retval != -EIDRM)
+					dev_err(&io->dev->dev,
+						"%s, unlink --> %d\n",
+						__func__, retval);
+			} else if (urb == io->urbs[i])
+				found = 1;
+		}
+		spin_lock_irqsave(&io->lock, flags);
+	}
+
+	/* on the last completion, signal usb_sg_wait() */
+	io->bytes += urb->actual_length;
+	io->count--;
+	if (!io->count)
+		complete(&io->complete);
+
+	spin_unlock_irqrestore(&io->lock, flags);
+}
+
+
+/**
+ * usb_sg_init - initializes scatterlist-based bulk/interrupt I/O request
+ * @io: request block being initialized.  until usb_sg_wait() returns,
+ *	treat this as a pointer to an opaque block of memory,
+ * @dev: the usb device that will send or receive the data
+ * @pipe: endpoint "pipe" used to transfer the data
+ * @period: polling rate for interrupt endpoints, in frames or
+ * 	(for high speed endpoints) microframes; ignored for bulk
+ * @sg: scatterlist entries
+ * @nents: how many entries in the scatterlist
+ * @length: how many bytes to send from the scatterlist, or zero to
+ * 	send every byte identified in the list.
+ * @mem_flags: SLAB_* flags affecting memory allocations in this call
+ *
+ * This initializes a scatter/gather request, allocating resources such as
+ * I/O mappings and urb memory (except maybe memory used by USB controller
+ * drivers).
+ *
+ * The request must be issued using usb_sg_wait(), which waits for the I/O to
+ * complete (or to be canceled) and then cleans up all resources allocated by
+ * usb_sg_init().
+ *
+ * The request may be canceled with usb_sg_cancel(), either before or after
+ * usb_sg_wait() is called.
+ *
+ * Return: Zero for success, else a negative errno value.
+ */
+int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
+		unsigned pipe, unsigned	period, struct scatterlist *sg,
+		int nents, size_t length, gfp_t mem_flags)
+{
+	int i;
+	int urb_flags;
+	int use_sg;
+
+	if (!io || !dev || !sg
+			|| usb_pipecontrol(pipe)
+			|| usb_pipeisoc(pipe)
+			|| nents <= 0)
+		return -EINVAL;
+
+	spin_lock_init(&io->lock);
+	io->dev = dev;
+	io->pipe = pipe;
+
+	if (dev->bus->sg_tablesize > 0) {
+		use_sg = true;
+		io->entries = 1;
+	} else {
+		use_sg = false;
+		io->entries = nents;
+	}
+
+	/* initialize all the urbs we'll use */
+	io->urbs = kmalloc_array(io->entries, sizeof(*io->urbs), mem_flags);
+	if (!io->urbs)
+		goto nomem;
+
+	urb_flags = URB_NO_INTERRUPT;
+	if (usb_pipein(pipe))
+		urb_flags |= URB_SHORT_NOT_OK;
+
+	for_each_sg(sg, sg, io->entries, i) {
+		struct urb *urb;
+		unsigned len;
+
+		urb = usb_alloc_urb(0, mem_flags);
+		if (!urb) {
+			io->entries = i;
+			goto nomem;
+		}
+		io->urbs[i] = urb;
+
+		urb->dev = NULL;
+		urb->pipe = pipe;
+		urb->interval = period;
+		urb->transfer_flags = urb_flags;
+		urb->complete = sg_complete;
+		urb->context = io;
+		urb->sg = sg;
+
+		if (use_sg) {
+			/* There is no single transfer buffer */
+			urb->transfer_buffer = NULL;
+			urb->num_sgs = nents;
+
+			/* A length of zero means transfer the whole sg list */
+			len = length;
+			if (len == 0) {
+				struct scatterlist	*sg2;
+				int			j;
+
+				for_each_sg(sg, sg2, nents, j)
+					len += sg2->length;
+			}
+		} else {
+			/*
+			 * Some systems can't use DMA; they use PIO instead.
+			 * For their sakes, transfer_buffer is set whenever
+			 * possible.
+			 */
+			if (!PageHighMem(sg_page(sg)))
+				urb->transfer_buffer = sg_virt(sg);
+			else
+				urb->transfer_buffer = NULL;
+
+			len = sg->length;
+			if (length) {
+				len = min_t(size_t, len, length);
+				length -= len;
+				if (length == 0)
+					io->entries = i + 1;
+			}
+		}
+		urb->transfer_buffer_length = len;
+	}
+	io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT;
+
+	/* transaction state */
+	io->count = io->entries;
+	io->status = 0;
+	io->bytes = 0;
+	init_completion(&io->complete);
+	return 0;
+
+nomem:
+	sg_clean(io);
+	return -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(usb_sg_init);
+
+/**
+ * usb_sg_wait - synchronously execute scatter/gather request
+ * @io: request block handle, as initialized with usb_sg_init().
+ * 	some fields become accessible when this call returns.
+ *
+ * Context: task context, might sleep.
+ *
+ * This function blocks until the specified I/O operation completes.  It
+ * leverages the grouping of the related I/O requests to get good transfer
+ * rates, by queueing the requests.  At higher speeds, such queuing can
+ * significantly improve USB throughput.
+ *
+ * There are three kinds of completion for this function.
+ *
+ * (1) success, where io->status is zero.  The number of io->bytes
+ *     transferred is as requested.
+ * (2) error, where io->status is a negative errno value.  The number
+ *     of io->bytes transferred before the error is usually less
+ *     than requested, and can be nonzero.
+ * (3) cancellation, a type of error with status -ECONNRESET that
+ *     is initiated by usb_sg_cancel().
+ *
+ * When this function returns, all memory allocated through usb_sg_init() or
+ * this call will have been freed.  The request block parameter may still be
+ * passed to usb_sg_cancel(), or it may be freed.  It could also be
+ * reinitialized and then reused.
+ *
+ * Data Transfer Rates:
+ *
+ * Bulk transfers are valid for full or high speed endpoints.
+ * The best full speed data rate is 19 packets of 64 bytes each
+ * per frame, or 1216 bytes per millisecond.
+ * The best high speed data rate is 13 packets of 512 bytes each
+ * per microframe, or 52 KBytes per millisecond.
+ *
+ * The reason to use interrupt transfers through this API would most likely
+ * be to reserve high speed bandwidth, where up to 24 KBytes per millisecond
+ * could be transferred.  That capability is less useful for low or full
+ * speed interrupt endpoints, which allow at most one packet per millisecond,
+ * of at most 8 or 64 bytes (respectively).
+ *
+ * It is not necessary to call this function to reserve bandwidth for devices
+ * under an xHCI host controller, as the bandwidth is reserved when the
+ * configuration or interface alt setting is selected.
+ */
+void usb_sg_wait(struct usb_sg_request *io)
+{
+	int i;
+	int entries = io->entries;
+
+	/* queue the urbs.  */
+	spin_lock_irq(&io->lock);
+	i = 0;
+	while (i < entries && !io->status) {
+		int retval;
+
+		io->urbs[i]->dev = io->dev;
+		spin_unlock_irq(&io->lock);
+
+		retval = usb_submit_urb(io->urbs[i], GFP_NOIO);
+
+		switch (retval) {
+			/* maybe we retrying will recover */
+		case -ENXIO:	/* hc didn't queue this one */
+		case -EAGAIN:
+		case -ENOMEM:
+			retval = 0;
+			yield();
+			break;
+
+			/* no error? continue immediately.
+			 *
+			 * NOTE: to work better with UHCI (4K I/O buffer may
+			 * need 3K of TDs) it may be good to limit how many
+			 * URBs are queued at once; N milliseconds?
+			 */
+		case 0:
+			++i;
+			cpu_relax();
+			break;
+
+			/* fail any uncompleted urbs */
+		default:
+			io->urbs[i]->status = retval;
+			dev_dbg(&io->dev->dev, "%s, submit --> %d\n",
+				__func__, retval);
+			usb_sg_cancel(io);
+		}
+		spin_lock_irq(&io->lock);
+		if (retval && (io->status == 0 || io->status == -ECONNRESET))
+			io->status = retval;
+	}
+	io->count -= entries - i;
+	if (io->count == 0)
+		complete(&io->complete);
+	spin_unlock_irq(&io->lock);
+
+	/* OK, yes, this could be packaged as non-blocking.
+	 * So could the submit loop above ... but it's easier to
+	 * solve neither problem than to solve both!
+	 */
+	wait_for_completion(&io->complete);
+
+	sg_clean(io);
+}
+EXPORT_SYMBOL_GPL(usb_sg_wait);
+
+/**
+ * usb_sg_cancel - stop scatter/gather i/o issued by usb_sg_wait()
+ * @io: request block, initialized with usb_sg_init()
+ *
+ * This stops a request after it has been started by usb_sg_wait().
+ * It can also prevents one initialized by usb_sg_init() from starting,
+ * so that call just frees resources allocated to the request.
+ */
+void usb_sg_cancel(struct usb_sg_request *io)
+{
+	unsigned long flags;
+	int i, retval;
+
+	spin_lock_irqsave(&io->lock, flags);
+	if (io->status || io->count == 0) {
+		spin_unlock_irqrestore(&io->lock, flags);
+		return;
+	}
+	/* shut everything down */
+	io->status = -ECONNRESET;
+	io->count++;		/* Keep the request alive until we're done */
+	spin_unlock_irqrestore(&io->lock, flags);
+
+	for (i = io->entries - 1; i >= 0; --i) {
+		usb_block_urb(io->urbs[i]);
+
+		retval = usb_unlink_urb(io->urbs[i]);
+		if (retval != -EINPROGRESS
+		    && retval != -ENODEV
+		    && retval != -EBUSY
+		    && retval != -EIDRM)
+			dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
+				 __func__, retval);
+	}
+
+	spin_lock_irqsave(&io->lock, flags);
+	io->count--;
+	if (!io->count)
+		complete(&io->complete);
+	spin_unlock_irqrestore(&io->lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_sg_cancel);
+
+/*-------------------------------------------------------------------*/
+
+/**
+ * usb_get_descriptor - issues a generic GET_DESCRIPTOR request
+ * @dev: the device whose descriptor is being retrieved
+ * @type: the descriptor type (USB_DT_*)
+ * @index: the number of the descriptor
+ * @buf: where to put the descriptor
+ * @size: how big is "buf"?
+ *
+ * Context: task context, might sleep.
+ *
+ * Gets a USB descriptor.  Convenience functions exist to simplify
+ * getting some types of descriptors.  Use
+ * usb_get_string() or usb_string() for USB_DT_STRING.
+ * Device (USB_DT_DEVICE) and configuration descriptors (USB_DT_CONFIG)
+ * are part of the device structure.
+ * In addition to a number of USB-standard descriptors, some
+ * devices also use class-specific or vendor-specific descriptors.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Return: The number of bytes received on success, or else the status code
+ * returned by the underlying usb_control_msg() call.
+ */
+int usb_get_descriptor(struct usb_device *dev, unsigned char type,
+		       unsigned char index, void *buf, int size)
+{
+	int i;
+	int result;
+
+	if (size <= 0)		/* No point in asking for no data */
+		return -EINVAL;
+
+	memset(buf, 0, size);	/* Make sure we parse really received data */
+
+	for (i = 0; i < 3; ++i) {
+		/* retry on length 0 or error; some devices are flakey */
+		result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+				USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
+				(type << 8) + index, 0, buf, size,
+				USB_CTRL_GET_TIMEOUT);
+		if (result <= 0 && result != -ETIMEDOUT)
+			continue;
+		if (result > 1 && ((u8 *)buf)[1] != type) {
+			result = -ENODATA;
+			continue;
+		}
+		break;
+	}
+	return result;
+}
+EXPORT_SYMBOL_GPL(usb_get_descriptor);
+
+/**
+ * usb_get_string - gets a string descriptor
+ * @dev: the device whose string descriptor is being retrieved
+ * @langid: code for language chosen (from string descriptor zero)
+ * @index: the number of the descriptor
+ * @buf: where to put the string
+ * @size: how big is "buf"?
+ *
+ * Context: task context, might sleep.
+ *
+ * Retrieves a string, encoded using UTF-16LE (Unicode, 16 bits per character,
+ * in little-endian byte order).
+ * The usb_string() function will often be a convenient way to turn
+ * these strings into kernel-printable form.
+ *
+ * Strings may be referenced in device, configuration, interface, or other
+ * descriptors, and could also be used in vendor-specific ways.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Return: The number of bytes received on success, or else the status code
+ * returned by the underlying usb_control_msg() call.
+ */
+static int usb_get_string(struct usb_device *dev, unsigned short langid,
+			  unsigned char index, void *buf, int size)
+{
+	int i;
+	int result;
+
+	if (size <= 0)		/* No point in asking for no data */
+		return -EINVAL;
+
+	for (i = 0; i < 3; ++i) {
+		/* retry on length 0 or stall; some devices are flakey */
+		result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
+			(USB_DT_STRING << 8) + index, langid, buf, size,
+			USB_CTRL_GET_TIMEOUT);
+		if (result == 0 || result == -EPIPE)
+			continue;
+		if (result > 1 && ((u8 *) buf)[1] != USB_DT_STRING) {
+			result = -ENODATA;
+			continue;
+		}
+		break;
+	}
+	return result;
+}
+
+static void usb_try_string_workarounds(unsigned char *buf, int *length)
+{
+	int newlength, oldlength = *length;
+
+	for (newlength = 2; newlength + 1 < oldlength; newlength += 2)
+		if (!isprint(buf[newlength]) || buf[newlength + 1])
+			break;
+
+	if (newlength > 2) {
+		buf[0] = newlength;
+		*length = newlength;
+	}
+}
+
+static int usb_string_sub(struct usb_device *dev, unsigned int langid,
+			  unsigned int index, unsigned char *buf)
+{
+	int rc;
+
+	/* Try to read the string descriptor by asking for the maximum
+	 * possible number of bytes */
+	if (dev->quirks & USB_QUIRK_STRING_FETCH_255)
+		rc = -EIO;
+	else
+		rc = usb_get_string(dev, langid, index, buf, 255);
+
+	/* If that failed try to read the descriptor length, then
+	 * ask for just that many bytes */
+	if (rc < 2) {
+		rc = usb_get_string(dev, langid, index, buf, 2);
+		if (rc == 2)
+			rc = usb_get_string(dev, langid, index, buf, buf[0]);
+	}
+
+	if (rc >= 2) {
+		if (!buf[0] && !buf[1])
+			usb_try_string_workarounds(buf, &rc);
+
+		/* There might be extra junk at the end of the descriptor */
+		if (buf[0] < rc)
+			rc = buf[0];
+
+		rc = rc - (rc & 1); /* force a multiple of two */
+	}
+
+	if (rc < 2)
+		rc = (rc < 0 ? rc : -EINVAL);
+
+	return rc;
+}
+
+static int usb_get_langid(struct usb_device *dev, unsigned char *tbuf)
+{
+	int err;
+
+	if (dev->have_langid)
+		return 0;
+
+	if (dev->string_langid < 0)
+		return -EPIPE;
+
+	err = usb_string_sub(dev, 0, 0, tbuf);
+
+	/* If the string was reported but is malformed, default to english
+	 * (0x0409) */
+	if (err == -ENODATA || (err > 0 && err < 4)) {
+		dev->string_langid = 0x0409;
+		dev->have_langid = 1;
+		dev_err(&dev->dev,
+			"language id specifier not provided by device, defaulting to English\n");
+		return 0;
+	}
+
+	/* In case of all other errors, we assume the device is not able to
+	 * deal with strings at all. Set string_langid to -1 in order to
+	 * prevent any string to be retrieved from the device */
+	if (err < 0) {
+		dev_info(&dev->dev, "string descriptor 0 read error: %d\n",
+					err);
+		dev->string_langid = -1;
+		return -EPIPE;
+	}
+
+	/* always use the first langid listed */
+	dev->string_langid = tbuf[2] | (tbuf[3] << 8);
+	dev->have_langid = 1;
+	dev_dbg(&dev->dev, "default language 0x%04x\n",
+				dev->string_langid);
+	return 0;
+}
+
+/**
+ * usb_string - returns UTF-8 version of a string descriptor
+ * @dev: the device whose string descriptor is being retrieved
+ * @index: the number of the descriptor
+ * @buf: where to put the string
+ * @size: how big is "buf"?
+ *
+ * Context: task context, might sleep.
+ *
+ * This converts the UTF-16LE encoded strings returned by devices, from
+ * usb_get_string_descriptor(), to null-terminated UTF-8 encoded ones
+ * that are more usable in most kernel contexts.  Note that this function
+ * chooses strings in the first language supported by the device.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Return: length of the string (>= 0) or usb_control_msg status (< 0).
+ */
+int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
+{
+	unsigned char *tbuf;
+	int err;
+
+	if (dev->state == USB_STATE_SUSPENDED)
+		return -EHOSTUNREACH;
+	if (size <= 0 || !buf)
+		return -EINVAL;
+	buf[0] = 0;
+	if (index <= 0 || index >= 256)
+		return -EINVAL;
+	tbuf = kmalloc(256, GFP_NOIO);
+	if (!tbuf)
+		return -ENOMEM;
+
+	err = usb_get_langid(dev, tbuf);
+	if (err < 0)
+		goto errout;
+
+	err = usb_string_sub(dev, dev->string_langid, index, tbuf);
+	if (err < 0)
+		goto errout;
+
+	size--;		/* leave room for trailing NULL char in output buffer */
+	err = utf16s_to_utf8s((wchar_t *) &tbuf[2], (err - 2) / 2,
+			UTF16_LITTLE_ENDIAN, buf, size);
+	buf[err] = 0;
+
+	if (tbuf[1] != USB_DT_STRING)
+		dev_dbg(&dev->dev,
+			"wrong descriptor type %02x for string %d (\"%s\")\n",
+			tbuf[1], index, buf);
+
+ errout:
+	kfree(tbuf);
+	return err;
+}
+EXPORT_SYMBOL_GPL(usb_string);
+
+/* one UTF-8-encoded 16-bit character has at most three bytes */
+#define MAX_USB_STRING_SIZE (127 * 3 + 1)
+
+/**
+ * usb_cache_string - read a string descriptor and cache it for later use
+ * @udev: the device whose string descriptor is being read
+ * @index: the descriptor index
+ *
+ * Return: A pointer to a kmalloc'ed buffer containing the descriptor string,
+ * or %NULL if the index is 0 or the string could not be read.
+ */
+char *usb_cache_string(struct usb_device *udev, int index)
+{
+	char *buf;
+	char *smallbuf = NULL;
+	int len;
+
+	if (index <= 0)
+		return NULL;
+
+	buf = kmalloc(MAX_USB_STRING_SIZE, GFP_NOIO);
+	if (buf) {
+		len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE);
+		if (len > 0) {
+			smallbuf = kmalloc(++len, GFP_NOIO);
+			if (!smallbuf)
+				return buf;
+			memcpy(smallbuf, buf, len);
+		}
+		kfree(buf);
+	}
+	return smallbuf;
+}
+
+/*
+ * usb_get_device_descriptor - read the device descriptor
+ * @udev: the device whose device descriptor should be read
+ *
+ * Context: task context, might sleep.
+ *
+ * Not exported, only for use by the core.  If drivers really want to read
+ * the device descriptor directly, they can call usb_get_descriptor() with
+ * type = USB_DT_DEVICE and index = 0.
+ *
+ * Returns: a pointer to a dynamically allocated usb_device_descriptor
+ * structure (which the caller must deallocate), or an ERR_PTR value.
+ */
+struct usb_device_descriptor *usb_get_device_descriptor(struct usb_device *udev)
+{
+	struct usb_device_descriptor *desc;
+	int ret;
+
+	desc = kmalloc(sizeof(*desc), GFP_NOIO);
+	if (!desc)
+		return ERR_PTR(-ENOMEM);
+
+	ret = usb_get_descriptor(udev, USB_DT_DEVICE, 0, desc, sizeof(*desc));
+	if (ret == sizeof(*desc))
+		return desc;
+
+	if (ret >= 0)
+		ret = -EMSGSIZE;
+	kfree(desc);
+	return ERR_PTR(ret);
+}
+
+/*
+ * usb_set_isoch_delay - informs the device of the packet transmit delay
+ * @dev: the device whose delay is to be informed
+ * Context: task context, might sleep
+ *
+ * Since this is an optional request, we don't bother if it fails.
+ */
+int usb_set_isoch_delay(struct usb_device *dev)
+{
+	/* skip hub devices */
+	if (dev->descriptor.bDeviceClass == USB_CLASS_HUB)
+		return 0;
+
+	/* skip non-SS/non-SSP devices */
+	if (dev->speed < USB_SPEED_SUPER)
+		return 0;
+
+	return usb_control_msg_send(dev, 0,
+			USB_REQ_SET_ISOCH_DELAY,
+			USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+			dev->hub_delay, 0, NULL, 0,
+			USB_CTRL_SET_TIMEOUT,
+			GFP_NOIO);
+}
+
+/**
+ * usb_get_status - issues a GET_STATUS call
+ * @dev: the device whose status is being checked
+ * @recip: USB_RECIP_*; for device, interface, or endpoint
+ * @type: USB_STATUS_TYPE_*; for standard or PTM status types
+ * @target: zero (for device), else interface or endpoint number
+ * @data: pointer to two bytes of bitmap data
+ *
+ * Context: task context, might sleep.
+ *
+ * Returns device, interface, or endpoint status.  Normally only of
+ * interest to see if the device is self powered, or has enabled the
+ * remote wakeup facility; or whether a bulk or interrupt endpoint
+ * is halted ("stalled").
+ *
+ * Bits in these status bitmaps are set using the SET_FEATURE request,
+ * and cleared using the CLEAR_FEATURE request.  The usb_clear_halt()
+ * function should be used to clear halt ("stall") status.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Returns 0 and the status value in *@data (in host byte order) on success,
+ * or else the status code from the underlying usb_control_msg() call.
+ */
+int usb_get_status(struct usb_device *dev, int recip, int type, int target,
+		void *data)
+{
+	int ret;
+	void *status;
+	int length;
+
+	switch (type) {
+	case USB_STATUS_TYPE_STANDARD:
+		length = 2;
+		break;
+	case USB_STATUS_TYPE_PTM:
+		if (recip != USB_RECIP_DEVICE)
+			return -EINVAL;
+
+		length = 4;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	status =  kmalloc(length, GFP_KERNEL);
+	if (!status)
+		return -ENOMEM;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+		USB_REQ_GET_STATUS, USB_DIR_IN | recip, USB_STATUS_TYPE_STANDARD,
+		target, status, length, USB_CTRL_GET_TIMEOUT);
+
+	switch (ret) {
+	case 4:
+		if (type != USB_STATUS_TYPE_PTM) {
+			ret = -EIO;
+			break;
+		}
+
+		*(u32 *) data = le32_to_cpu(*(__le32 *) status);
+		ret = 0;
+		break;
+	case 2:
+		if (type != USB_STATUS_TYPE_STANDARD) {
+			ret = -EIO;
+			break;
+		}
+
+		*(u16 *) data = le16_to_cpu(*(__le16 *) status);
+		ret = 0;
+		break;
+	default:
+		ret = -EIO;
+	}
+
+	kfree(status);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_get_status);
+
+/**
+ * usb_clear_halt - tells device to clear endpoint halt/stall condition
+ * @dev: device whose endpoint is halted
+ * @pipe: endpoint "pipe" being cleared
+ *
+ * Context: task context, might sleep.
+ *
+ * This is used to clear halt conditions for bulk and interrupt endpoints,
+ * as reported by URB completion status.  Endpoints that are halted are
+ * sometimes referred to as being "stalled".  Such endpoints are unable
+ * to transmit or receive data until the halt status is cleared.  Any URBs
+ * queued for such an endpoint should normally be unlinked by the driver
+ * before clearing the halt condition, as described in sections 5.7.5
+ * and 5.8.5 of the USB 2.0 spec.
+ *
+ * Note that control and isochronous endpoints don't halt, although control
+ * endpoints report "protocol stall" (for unsupported requests) using the
+ * same status code used to report a true stall.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Return: Zero on success, or else the status code returned by the
+ * underlying usb_control_msg() call.
+ */
+int usb_clear_halt(struct usb_device *dev, int pipe)
+{
+	int result;
+	int endp = usb_pipeendpoint(pipe);
+
+	if (usb_pipein(pipe))
+		endp |= USB_DIR_IN;
+
+	/* we don't care if it wasn't halted first. in fact some devices
+	 * (like some ibmcam model 1 units) seem to expect hosts to make
+	 * this request for iso endpoints, which can't halt!
+	 */
+	result = usb_control_msg_send(dev, 0,
+				      USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT,
+				      USB_ENDPOINT_HALT, endp, NULL, 0,
+				      USB_CTRL_SET_TIMEOUT, GFP_NOIO);
+
+	/* don't un-halt or force to DATA0 except on success */
+	if (result)
+		return result;
+
+	/* NOTE:  seems like Microsoft and Apple don't bother verifying
+	 * the clear "took", so some devices could lock up if you check...
+	 * such as the Hagiwara FlashGate DUAL.  So we won't bother.
+	 *
+	 * NOTE:  make sure the logic here doesn't diverge much from
+	 * the copy in usb-storage, for as long as we need two copies.
+	 */
+
+	usb_reset_endpoint(dev, endp);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_clear_halt);
+
+static int create_intf_ep_devs(struct usb_interface *intf)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usb_host_interface *alt = intf->cur_altsetting;
+	int i;
+
+	if (intf->ep_devs_created || intf->unregistering)
+		return 0;
+
+	for (i = 0; i < alt->desc.bNumEndpoints; ++i)
+		(void) usb_create_ep_devs(&intf->dev, &alt->endpoint[i], udev);
+	intf->ep_devs_created = 1;
+	return 0;
+}
+
+static void remove_intf_ep_devs(struct usb_interface *intf)
+{
+	struct usb_host_interface *alt = intf->cur_altsetting;
+	int i;
+
+	if (!intf->ep_devs_created)
+		return;
+
+	for (i = 0; i < alt->desc.bNumEndpoints; ++i)
+		usb_remove_ep_devs(&alt->endpoint[i]);
+	intf->ep_devs_created = 0;
+}
+
+/**
+ * usb_disable_endpoint -- Disable an endpoint by address
+ * @dev: the device whose endpoint is being disabled
+ * @epaddr: the endpoint's address.  Endpoint number for output,
+ *	endpoint number + USB_DIR_IN for input
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ *	controller hardware
+ *
+ * Disables the endpoint for URB submission and nukes all pending URBs.
+ * If @reset_hardware is set then also deallocates hcd/hardware state
+ * for the endpoint.
+ */
+void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+		bool reset_hardware)
+{
+	unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
+	struct usb_host_endpoint *ep;
+
+	if (!dev)
+		return;
+
+	if (usb_endpoint_out(epaddr)) {
+		ep = dev->ep_out[epnum];
+		if (reset_hardware && epnum != 0)
+			dev->ep_out[epnum] = NULL;
+	} else {
+		ep = dev->ep_in[epnum];
+		if (reset_hardware && epnum != 0)
+			dev->ep_in[epnum] = NULL;
+	}
+	if (ep) {
+		ep->enabled = 0;
+		usb_hcd_flush_endpoint(dev, ep);
+		if (reset_hardware)
+			usb_hcd_disable_endpoint(dev, ep);
+	}
+}
+
+/**
+ * usb_reset_endpoint - Reset an endpoint's state.
+ * @dev: the device whose endpoint is to be reset
+ * @epaddr: the endpoint's address.  Endpoint number for output,
+ *	endpoint number + USB_DIR_IN for input
+ *
+ * Resets any host-side endpoint state such as the toggle bit,
+ * sequence number or current window.
+ */
+void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr)
+{
+	unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
+	struct usb_host_endpoint *ep;
+
+	if (usb_endpoint_out(epaddr))
+		ep = dev->ep_out[epnum];
+	else
+		ep = dev->ep_in[epnum];
+	if (ep)
+		usb_hcd_reset_endpoint(dev, ep);
+}
+EXPORT_SYMBOL_GPL(usb_reset_endpoint);
+
+
+/**
+ * usb_disable_interface -- Disable all endpoints for an interface
+ * @dev: the device whose interface is being disabled
+ * @intf: pointer to the interface descriptor
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ *	controller hardware
+ *
+ * Disables all the endpoints for the interface's current altsetting.
+ */
+void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
+		bool reset_hardware)
+{
+	struct usb_host_interface *alt = intf->cur_altsetting;
+	int i;
+
+	for (i = 0; i < alt->desc.bNumEndpoints; ++i) {
+		usb_disable_endpoint(dev,
+				alt->endpoint[i].desc.bEndpointAddress,
+				reset_hardware);
+	}
+}
+
+/*
+ * usb_disable_device_endpoints -- Disable all endpoints for a device
+ * @dev: the device whose endpoints are being disabled
+ * @skip_ep0: 0 to disable endpoint 0, 1 to skip it.
+ */
+static void usb_disable_device_endpoints(struct usb_device *dev, int skip_ep0)
+{
+	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
+	int i;
+
+	if (hcd->driver->check_bandwidth) {
+		/* First pass: Cancel URBs, leave endpoint pointers intact. */
+		for (i = skip_ep0; i < 16; ++i) {
+			usb_disable_endpoint(dev, i, false);
+			usb_disable_endpoint(dev, i + USB_DIR_IN, false);
+		}
+		/* Remove endpoints from the host controller internal state */
+		mutex_lock(hcd->bandwidth_mutex);
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		mutex_unlock(hcd->bandwidth_mutex);
+	}
+	/* Second pass: remove endpoint pointers */
+	for (i = skip_ep0; i < 16; ++i) {
+		usb_disable_endpoint(dev, i, true);
+		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
+	}
+}
+
+/**
+ * usb_disable_device - Disable all the endpoints for a USB device
+ * @dev: the device whose endpoints are being disabled
+ * @skip_ep0: 0 to disable endpoint 0, 1 to skip it.
+ *
+ * Disables all the device's endpoints, potentially including endpoint 0.
+ * Deallocates hcd/hardware state for the endpoints (nuking all or most
+ * pending urbs) and usbcore state for the interfaces, so that usbcore
+ * must usb_set_configuration() before any interfaces could be used.
+ */
+void usb_disable_device(struct usb_device *dev, int skip_ep0)
+{
+	int i;
+
+	/* getting rid of interfaces will disconnect
+	 * any drivers bound to them (a key side effect)
+	 */
+	if (dev->actconfig) {
+		/*
+		 * FIXME: In order to avoid self-deadlock involving the
+		 * bandwidth_mutex, we have to mark all the interfaces
+		 * before unregistering any of them.
+		 */
+		for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++)
+			dev->actconfig->interface[i]->unregistering = 1;
+
+		for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) {
+			struct usb_interface	*interface;
+
+			/* remove this interface if it has been registered */
+			interface = dev->actconfig->interface[i];
+			if (!device_is_registered(&interface->dev))
+				continue;
+			dev_dbg(&dev->dev, "unregistering interface %s\n",
+				dev_name(&interface->dev));
+			remove_intf_ep_devs(interface);
+			device_del(&interface->dev);
+		}
+
+		/* Now that the interfaces are unbound, nobody should
+		 * try to access them.
+		 */
+		for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) {
+			put_device(&dev->actconfig->interface[i]->dev);
+			dev->actconfig->interface[i] = NULL;
+		}
+
+		usb_disable_usb2_hardware_lpm(dev);
+		usb_unlocked_disable_lpm(dev);
+		usb_disable_ltm(dev);
+
+		dev->actconfig = NULL;
+		if (dev->state == USB_STATE_CONFIGURED)
+			usb_set_device_state(dev, USB_STATE_ADDRESS);
+	}
+
+	dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
+		skip_ep0 ? "non-ep0" : "all");
+
+	usb_disable_device_endpoints(dev, skip_ep0);
+}
+
+/**
+ * usb_enable_endpoint - Enable an endpoint for USB communications
+ * @dev: the device whose interface is being enabled
+ * @ep: the endpoint
+ * @reset_ep: flag to reset the endpoint state
+ *
+ * Resets the endpoint state if asked, and sets dev->ep_{in,out} pointers.
+ * For control endpoints, both the input and output sides are handled.
+ */
+void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep,
+		bool reset_ep)
+{
+	int epnum = usb_endpoint_num(&ep->desc);
+	int is_out = usb_endpoint_dir_out(&ep->desc);
+	int is_control = usb_endpoint_xfer_control(&ep->desc);
+
+	if (reset_ep)
+		usb_hcd_reset_endpoint(dev, ep);
+	if (is_out || is_control)
+		dev->ep_out[epnum] = ep;
+	if (!is_out || is_control)
+		dev->ep_in[epnum] = ep;
+	ep->enabled = 1;
+}
+
+/**
+ * usb_enable_interface - Enable all the endpoints for an interface
+ * @dev: the device whose interface is being enabled
+ * @intf: pointer to the interface descriptor
+ * @reset_eps: flag to reset the endpoints' state
+ *
+ * Enables all the endpoints for the interface's current altsetting.
+ */
+void usb_enable_interface(struct usb_device *dev,
+		struct usb_interface *intf, bool reset_eps)
+{
+	struct usb_host_interface *alt = intf->cur_altsetting;
+	int i;
+
+	for (i = 0; i < alt->desc.bNumEndpoints; ++i)
+		usb_enable_endpoint(dev, &alt->endpoint[i], reset_eps);
+}
+
+/**
+ * usb_set_interface - Makes a particular alternate setting be current
+ * @dev: the device whose interface is being updated
+ * @interface: the interface being updated
+ * @alternate: the setting being chosen.
+ *
+ * Context: task context, might sleep.
+ *
+ * This is used to enable data transfers on interfaces that may not
+ * be enabled by default.  Not all devices support such configurability.
+ * Only the driver bound to an interface may change its setting.
+ *
+ * Within any given configuration, each interface may have several
+ * alternative settings.  These are often used to control levels of
+ * bandwidth consumption.  For example, the default setting for a high
+ * speed interrupt endpoint may not send more than 64 bytes per microframe,
+ * while interrupt transfers of up to 3KBytes per microframe are legal.
+ * Also, isochronous endpoints may never be part of an
+ * interface's default setting.  To access such bandwidth, alternate
+ * interface settings must be made current.
+ *
+ * Note that in the Linux USB subsystem, bandwidth associated with
+ * an endpoint in a given alternate setting is not reserved until an URB
+ * is submitted that needs that bandwidth.  Some other operating systems
+ * allocate bandwidth early, when a configuration is chosen.
+ *
+ * xHCI reserves bandwidth and configures the alternate setting in
+ * usb_hcd_alloc_bandwidth(). If it fails the original interface altsetting
+ * may be disabled. Drivers cannot rely on any particular alternate
+ * setting being in effect after a failure.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ * Also, drivers must not change altsettings while urbs are scheduled for
+ * endpoints in that interface; all such urbs must first be completed
+ * (perhaps forced by unlinking).
+ *
+ * Return: Zero on success, or else the status code returned by the
+ * underlying usb_control_msg() call.
+ */
+int usb_set_interface(struct usb_device *dev, int interface, int alternate)
+{
+	struct usb_interface *iface;
+	struct usb_host_interface *alt;
+	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
+	int i, ret, manual = 0;
+	unsigned int epaddr;
+	unsigned int pipe;
+
+	if (dev->state == USB_STATE_SUSPENDED)
+		return -EHOSTUNREACH;
+
+	iface = usb_ifnum_to_if(dev, interface);
+	if (!iface) {
+		dev_dbg(&dev->dev, "selecting invalid interface %d\n",
+			interface);
+		return -EINVAL;
+	}
+	if (iface->unregistering)
+		return -ENODEV;
+
+	alt = usb_altnum_to_altsetting(iface, alternate);
+	if (!alt) {
+		dev_warn(&dev->dev, "selecting invalid altsetting %d\n",
+			 alternate);
+		return -EINVAL;
+	}
+	/*
+	 * usb3 hosts configure the interface in usb_hcd_alloc_bandwidth,
+	 * including freeing dropped endpoint ring buffers.
+	 * Make sure the interface endpoints are flushed before that
+	 */
+	usb_disable_interface(dev, iface, false);
+
+	/* Make sure we have enough bandwidth for this alternate interface.
+	 * Remove the current alt setting and add the new alt setting.
+	 */
+	mutex_lock(hcd->bandwidth_mutex);
+	/* Disable LPM, and re-enable it once the new alt setting is installed,
+	 * so that the xHCI driver can recalculate the U1/U2 timeouts.
+	 */
+	if (usb_disable_lpm(dev)) {
+		dev_err(&iface->dev, "%s Failed to disable LPM\n", __func__);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return -ENOMEM;
+	}
+	/* Changing alt-setting also frees any allocated streams */
+	for (i = 0; i < iface->cur_altsetting->desc.bNumEndpoints; i++)
+		iface->cur_altsetting->endpoint[i].streams = 0;
+
+	ret = usb_hcd_alloc_bandwidth(dev, NULL, iface->cur_altsetting, alt);
+	if (ret < 0) {
+		dev_info(&dev->dev, "Not enough bandwidth for altsetting %d\n",
+				alternate);
+		usb_enable_lpm(dev);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return ret;
+	}
+
+	if (dev->quirks & USB_QUIRK_NO_SET_INTF)
+		ret = -EPIPE;
+	else
+		ret = usb_control_msg_send(dev, 0,
+					   USB_REQ_SET_INTERFACE,
+					   USB_RECIP_INTERFACE, alternate,
+					   interface, NULL, 0, 5000,
+					   GFP_NOIO);
+
+	/* 9.4.10 says devices don't need this and are free to STALL the
+	 * request if the interface only has one alternate setting.
+	 */
+	if (ret == -EPIPE && iface->num_altsetting == 1) {
+		dev_dbg(&dev->dev,
+			"manual set_interface for iface %d, alt %d\n",
+			interface, alternate);
+		manual = 1;
+	} else if (ret) {
+		/* Re-instate the old alt setting */
+		usb_hcd_alloc_bandwidth(dev, NULL, alt, iface->cur_altsetting);
+		usb_enable_lpm(dev);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return ret;
+	}
+	mutex_unlock(hcd->bandwidth_mutex);
+
+	/* FIXME drivers shouldn't need to replicate/bugfix the logic here
+	 * when they implement async or easily-killable versions of this or
+	 * other "should-be-internal" functions (like clear_halt).
+	 * should hcd+usbcore postprocess control requests?
+	 */
+
+	/* prevent submissions using previous endpoint settings */
+	if (iface->cur_altsetting != alt) {
+		remove_intf_ep_devs(iface);
+		usb_remove_sysfs_intf_files(iface);
+	}
+	usb_disable_interface(dev, iface, true);
+
+	iface->cur_altsetting = alt;
+
+	/* Now that the interface is installed, re-enable LPM. */
+	usb_unlocked_enable_lpm(dev);
+
+	/* If the interface only has one altsetting and the device didn't
+	 * accept the request, we attempt to carry out the equivalent action
+	 * by manually clearing the HALT feature for each endpoint in the
+	 * new altsetting.
+	 */
+	if (manual) {
+		for (i = 0; i < alt->desc.bNumEndpoints; i++) {
+			epaddr = alt->endpoint[i].desc.bEndpointAddress;
+			pipe = __create_pipe(dev,
+					USB_ENDPOINT_NUMBER_MASK & epaddr) |
+					(usb_endpoint_out(epaddr) ?
+					USB_DIR_OUT : USB_DIR_IN);
+
+			usb_clear_halt(dev, pipe);
+		}
+	}
+
+	/* 9.1.1.5: reset toggles for all endpoints in the new altsetting
+	 *
+	 * Note:
+	 * Despite EP0 is always present in all interfaces/AS, the list of
+	 * endpoints from the descriptor does not contain EP0. Due to its
+	 * omnipresence one might expect EP0 being considered "affected" by
+	 * any SetInterface request and hence assume toggles need to be reset.
+	 * However, EP0 toggles are re-synced for every individual transfer
+	 * during the SETUP stage - hence EP0 toggles are "don't care" here.
+	 * (Likewise, EP0 never "halts" on well designed devices.)
+	 */
+	usb_enable_interface(dev, iface, true);
+	if (device_is_registered(&iface->dev)) {
+		usb_create_sysfs_intf_files(iface);
+		create_intf_ep_devs(iface);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_set_interface);
+
+/**
+ * usb_reset_configuration - lightweight device reset
+ * @dev: the device whose configuration is being reset
+ *
+ * This issues a standard SET_CONFIGURATION request to the device using
+ * the current configuration.  The effect is to reset most USB-related
+ * state in the device, including interface altsettings (reset to zero),
+ * endpoint halts (cleared), and endpoint state (only for bulk and interrupt
+ * endpoints).  Other usbcore state is unchanged, including bindings of
+ * usb device drivers to interfaces.
+ *
+ * Because this affects multiple interfaces, avoid using this with composite
+ * (multi-interface) devices.  Instead, the driver for each interface may
+ * use usb_set_interface() on the interfaces it claims.  Be careful though;
+ * some devices don't support the SET_INTERFACE request, and others won't
+ * reset all the interface state (notably endpoint state).  Resetting the whole
+ * configuration would affect other drivers' interfaces.
+ *
+ * The caller must own the device lock.
+ *
+ * Return: Zero on success, else a negative error code.
+ *
+ * If this routine fails the device will probably be in an unusable state
+ * with endpoints disabled, and interfaces only partially enabled.
+ */
+int usb_reset_configuration(struct usb_device *dev)
+{
+	int			i, retval;
+	struct usb_host_config	*config;
+	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
+
+	if (dev->state == USB_STATE_SUSPENDED)
+		return -EHOSTUNREACH;
+
+	/* caller must have locked the device and must own
+	 * the usb bus readlock (so driver bindings are stable);
+	 * calls during probe() are fine
+	 */
+
+	usb_disable_device_endpoints(dev, 1); /* skip ep0*/
+
+	config = dev->actconfig;
+	retval = 0;
+	mutex_lock(hcd->bandwidth_mutex);
+	/* Disable LPM, and re-enable it once the configuration is reset, so
+	 * that the xHCI driver can recalculate the U1/U2 timeouts.
+	 */
+	if (usb_disable_lpm(dev)) {
+		dev_err(&dev->dev, "%s Failed to disable LPM\n", __func__);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return -ENOMEM;
+	}
+
+	/* xHCI adds all endpoints in usb_hcd_alloc_bandwidth */
+	retval = usb_hcd_alloc_bandwidth(dev, config, NULL, NULL);
+	if (retval < 0) {
+		usb_enable_lpm(dev);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return retval;
+	}
+	retval = usb_control_msg_send(dev, 0, USB_REQ_SET_CONFIGURATION, 0,
+				      config->desc.bConfigurationValue, 0,
+				      NULL, 0, USB_CTRL_SET_TIMEOUT,
+				      GFP_NOIO);
+	if (retval) {
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		usb_enable_lpm(dev);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return retval;
+	}
+	mutex_unlock(hcd->bandwidth_mutex);
+
+	/* re-init hc/hcd interface/endpoint state */
+	for (i = 0; i < config->desc.bNumInterfaces; i++) {
+		struct usb_interface *intf = config->interface[i];
+		struct usb_host_interface *alt;
+
+		alt = usb_altnum_to_altsetting(intf, 0);
+
+		/* No altsetting 0?  We'll assume the first altsetting.
+		 * We could use a GetInterface call, but if a device is
+		 * so non-compliant that it doesn't have altsetting 0
+		 * then I wouldn't trust its reply anyway.
+		 */
+		if (!alt)
+			alt = &intf->altsetting[0];
+
+		if (alt != intf->cur_altsetting) {
+			remove_intf_ep_devs(intf);
+			usb_remove_sysfs_intf_files(intf);
+		}
+		intf->cur_altsetting = alt;
+		usb_enable_interface(dev, intf, true);
+		if (device_is_registered(&intf->dev)) {
+			usb_create_sysfs_intf_files(intf);
+			create_intf_ep_devs(intf);
+		}
+	}
+	/* Now that the interfaces are installed, re-enable LPM. */
+	usb_unlocked_enable_lpm(dev);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_reset_configuration);
+
+static void usb_release_interface(struct device *dev)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_interface_cache *intfc =
+			altsetting_to_usb_interface_cache(intf->altsetting);
+
+	kref_put(&intfc->ref, usb_release_interface_cache);
+	usb_put_dev(interface_to_usbdev(intf));
+	of_node_put(dev->of_node);
+	kfree(intf);
+}
+
+/*
+ * usb_deauthorize_interface - deauthorize an USB interface
+ *
+ * @intf: USB interface structure
+ */
+void usb_deauthorize_interface(struct usb_interface *intf)
+{
+	struct device *dev = &intf->dev;
+
+	device_lock(dev->parent);
+
+	if (intf->authorized) {
+		device_lock(dev);
+		intf->authorized = 0;
+		device_unlock(dev);
+
+		usb_forced_unbind_intf(intf);
+	}
+
+	device_unlock(dev->parent);
+}
+
+/*
+ * usb_authorize_interface - authorize an USB interface
+ *
+ * @intf: USB interface structure
+ */
+void usb_authorize_interface(struct usb_interface *intf)
+{
+	struct device *dev = &intf->dev;
+
+	if (!intf->authorized) {
+		device_lock(dev);
+		intf->authorized = 1; /* authorize interface */
+		device_unlock(dev);
+	}
+}
+
+static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct usb_device *usb_dev;
+	struct usb_interface *intf;
+	struct usb_host_interface *alt;
+
+	intf = to_usb_interface(dev);
+	usb_dev = interface_to_usbdev(intf);
+	alt = intf->cur_altsetting;
+
+	if (add_uevent_var(env, "INTERFACE=%d/%d/%d",
+		   alt->desc.bInterfaceClass,
+		   alt->desc.bInterfaceSubClass,
+		   alt->desc.bInterfaceProtocol))
+		return -ENOMEM;
+
+	if (add_uevent_var(env,
+		   "MODALIAS=usb:"
+		   "v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02Xin%02X",
+		   le16_to_cpu(usb_dev->descriptor.idVendor),
+		   le16_to_cpu(usb_dev->descriptor.idProduct),
+		   le16_to_cpu(usb_dev->descriptor.bcdDevice),
+		   usb_dev->descriptor.bDeviceClass,
+		   usb_dev->descriptor.bDeviceSubClass,
+		   usb_dev->descriptor.bDeviceProtocol,
+		   alt->desc.bInterfaceClass,
+		   alt->desc.bInterfaceSubClass,
+		   alt->desc.bInterfaceProtocol,
+		   alt->desc.bInterfaceNumber))
+		return -ENOMEM;
+
+	return 0;
+}
+
+struct device_type usb_if_device_type = {
+	.name =		"usb_interface",
+	.release =	usb_release_interface,
+	.uevent =	usb_if_uevent,
+};
+
+static struct usb_interface_assoc_descriptor *find_iad(struct usb_device *dev,
+						struct usb_host_config *config,
+						u8 inum)
+{
+	struct usb_interface_assoc_descriptor *retval = NULL;
+	struct usb_interface_assoc_descriptor *intf_assoc;
+	int first_intf;
+	int last_intf;
+	int i;
+
+	for (i = 0; (i < USB_MAXIADS && config->intf_assoc[i]); i++) {
+		intf_assoc = config->intf_assoc[i];
+		if (intf_assoc->bInterfaceCount == 0)
+			continue;
+
+		first_intf = intf_assoc->bFirstInterface;
+		last_intf = first_intf + (intf_assoc->bInterfaceCount - 1);
+		if (inum >= first_intf && inum <= last_intf) {
+			if (!retval)
+				retval = intf_assoc;
+			else
+				dev_err(&dev->dev, "Interface #%d referenced"
+					" by multiple IADs\n", inum);
+		}
+	}
+
+	return retval;
+}
+
+
+/*
+ * Internal function to queue a device reset
+ * See usb_queue_reset_device() for more details
+ */
+static void __usb_queue_reset_device(struct work_struct *ws)
+{
+	int rc;
+	struct usb_interface *iface =
+		container_of(ws, struct usb_interface, reset_ws);
+	struct usb_device *udev = interface_to_usbdev(iface);
+
+	rc = usb_lock_device_for_reset(udev, iface);
+	if (rc >= 0) {
+		usb_reset_device(udev);
+		usb_unlock_device(udev);
+	}
+	usb_put_intf(iface);	/* Undo _get_ in usb_queue_reset_device() */
+}
+
+
+/*
+ * usb_set_configuration - Makes a particular device setting be current
+ * @dev: the device whose configuration is being updated
+ * @configuration: the configuration being chosen.
+ *
+ * Context: task context, might sleep. Caller holds device lock.
+ *
+ * This is used to enable non-default device modes.  Not all devices
+ * use this kind of configurability; many devices only have one
+ * configuration.
+ *
+ * @configuration is the value of the configuration to be installed.
+ * According to the USB spec (e.g. section 9.1.1.5), configuration values
+ * must be non-zero; a value of zero indicates that the device in
+ * unconfigured.  However some devices erroneously use 0 as one of their
+ * configuration values.  To help manage such devices, this routine will
+ * accept @configuration = -1 as indicating the device should be put in
+ * an unconfigured state.
+ *
+ * USB device configurations may affect Linux interoperability,
+ * power consumption and the functionality available.  For example,
+ * the default configuration is limited to using 100mA of bus power,
+ * so that when certain device functionality requires more power,
+ * and the device is bus powered, that functionality should be in some
+ * non-default device configuration.  Other device modes may also be
+ * reflected as configuration options, such as whether two ISDN
+ * channels are available independently; and choosing between open
+ * standard device protocols (like CDC) or proprietary ones.
+ *
+ * Note that a non-authorized device (dev->authorized == 0) will only
+ * be put in unconfigured mode.
+ *
+ * Note that USB has an additional level of device configurability,
+ * associated with interfaces.  That configurability is accessed using
+ * usb_set_interface().
+ *
+ * This call is synchronous. The calling context must be able to sleep,
+ * must own the device lock, and must not hold the driver model's USB
+ * bus mutex; usb interface driver probe() methods cannot use this routine.
+ *
+ * Returns zero on success, or else the status code returned by the
+ * underlying call that failed.  On successful completion, each interface
+ * in the original device configuration has been destroyed, and each one
+ * in the new configuration has been probed by all relevant usb device
+ * drivers currently known to the kernel.
+ */
+int usb_set_configuration(struct usb_device *dev, int configuration)
+{
+	int i, ret;
+	struct usb_host_config *cp = NULL;
+	struct usb_interface **new_interfaces = NULL;
+	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
+	int n, nintf;
+
+	if (dev->authorized == 0 || configuration == -1)
+		configuration = 0;
+	else {
+		for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
+			if (dev->config[i].desc.bConfigurationValue ==
+					configuration) {
+				cp = &dev->config[i];
+				break;
+			}
+		}
+	}
+	if ((!cp && configuration != 0))
+		return -EINVAL;
+
+	/* The USB spec says configuration 0 means unconfigured.
+	 * But if a device includes a configuration numbered 0,
+	 * we will accept it as a correctly configured state.
+	 * Use -1 if you really want to unconfigure the device.
+	 */
+	if (cp && configuration == 0)
+		dev_warn(&dev->dev, "config 0 descriptor??\n");
+
+	/* Allocate memory for new interfaces before doing anything else,
+	 * so that if we run out then nothing will have changed. */
+	n = nintf = 0;
+	if (cp) {
+		nintf = cp->desc.bNumInterfaces;
+		new_interfaces = kmalloc_array(nintf, sizeof(*new_interfaces),
+					       GFP_NOIO);
+		if (!new_interfaces)
+			return -ENOMEM;
+
+		for (; n < nintf; ++n) {
+			new_interfaces[n] = kzalloc(
+					sizeof(struct usb_interface),
+					GFP_NOIO);
+			if (!new_interfaces[n]) {
+				ret = -ENOMEM;
+free_interfaces:
+				while (--n >= 0)
+					kfree(new_interfaces[n]);
+				kfree(new_interfaces);
+				return ret;
+			}
+		}
+
+		i = dev->bus_mA - usb_get_max_power(dev, cp);
+		if (i < 0)
+			dev_warn(&dev->dev, "new config #%d exceeds power "
+					"limit by %dmA\n",
+					configuration, -i);
+	}
+
+	/* Wake up the device so we can send it the Set-Config request */
+	ret = usb_autoresume_device(dev);
+	if (ret)
+		goto free_interfaces;
+
+	/* if it's already configured, clear out old state first.
+	 * getting rid of old interfaces means unbinding their drivers.
+	 */
+	if (dev->state != USB_STATE_ADDRESS)
+		usb_disable_device(dev, 1);	/* Skip ep0 */
+
+	/* Get rid of pending async Set-Config requests for this device */
+	cancel_async_set_config(dev);
+
+	/* Make sure we have bandwidth (and available HCD resources) for this
+	 * configuration.  Remove endpoints from the schedule if we're dropping
+	 * this configuration to set configuration 0.  After this point, the
+	 * host controller will not allow submissions to dropped endpoints.  If
+	 * this call fails, the device state is unchanged.
+	 */
+	mutex_lock(hcd->bandwidth_mutex);
+	/* Disable LPM, and re-enable it once the new configuration is
+	 * installed, so that the xHCI driver can recalculate the U1/U2
+	 * timeouts.
+	 */
+	if (dev->actconfig && usb_disable_lpm(dev)) {
+		dev_err(&dev->dev, "%s Failed to disable LPM\n", __func__);
+		mutex_unlock(hcd->bandwidth_mutex);
+		ret = -ENOMEM;
+		goto free_interfaces;
+	}
+	ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
+	if (ret < 0) {
+		if (dev->actconfig)
+			usb_enable_lpm(dev);
+		mutex_unlock(hcd->bandwidth_mutex);
+		usb_autosuspend_device(dev);
+		goto free_interfaces;
+	}
+
+	/*
+	 * Initialize the new interface structures and the
+	 * hc/hcd/usbcore interface/endpoint state.
+	 */
+	for (i = 0; i < nintf; ++i) {
+		struct usb_interface_cache *intfc;
+		struct usb_interface *intf;
+		struct usb_host_interface *alt;
+		u8 ifnum;
+
+		cp->interface[i] = intf = new_interfaces[i];
+		intfc = cp->intf_cache[i];
+		intf->altsetting = intfc->altsetting;
+		intf->num_altsetting = intfc->num_altsetting;
+		intf->authorized = !!HCD_INTF_AUTHORIZED(hcd);
+		kref_get(&intfc->ref);
+
+		alt = usb_altnum_to_altsetting(intf, 0);
+
+		/* No altsetting 0?  We'll assume the first altsetting.
+		 * We could use a GetInterface call, but if a device is
+		 * so non-compliant that it doesn't have altsetting 0
+		 * then I wouldn't trust its reply anyway.
+		 */
+		if (!alt)
+			alt = &intf->altsetting[0];
+
+		ifnum = alt->desc.bInterfaceNumber;
+		intf->intf_assoc = find_iad(dev, cp, ifnum);
+		intf->cur_altsetting = alt;
+		usb_enable_interface(dev, intf, true);
+		intf->dev.parent = &dev->dev;
+		if (usb_of_has_combined_node(dev)) {
+			device_set_of_node_from_dev(&intf->dev, &dev->dev);
+		} else {
+			intf->dev.of_node = usb_of_get_interface_node(dev,
+					configuration, ifnum);
+		}
+		ACPI_COMPANION_SET(&intf->dev, ACPI_COMPANION(&dev->dev));
+		intf->dev.driver = NULL;
+		intf->dev.bus = &usb_bus_type;
+		intf->dev.type = &usb_if_device_type;
+		intf->dev.groups = usb_interface_groups;
+		INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
+		intf->minor = -1;
+		device_initialize(&intf->dev);
+		pm_runtime_no_callbacks(&intf->dev);
+		dev_set_name(&intf->dev, "%d-%s:%d.%d", dev->bus->busnum,
+				dev->devpath, configuration, ifnum);
+		usb_get_dev(dev);
+	}
+	kfree(new_interfaces);
+
+	ret = usb_control_msg_send(dev, 0, USB_REQ_SET_CONFIGURATION, 0,
+				   configuration, 0, NULL, 0,
+				   USB_CTRL_SET_TIMEOUT, GFP_NOIO);
+	if (ret && cp) {
+		/*
+		 * All the old state is gone, so what else can we do?
+		 * The device is probably useless now anyway.
+		 */
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		for (i = 0; i < nintf; ++i) {
+			usb_disable_interface(dev, cp->interface[i], true);
+			put_device(&cp->interface[i]->dev);
+			cp->interface[i] = NULL;
+		}
+		cp = NULL;
+	}
+
+	dev->actconfig = cp;
+	mutex_unlock(hcd->bandwidth_mutex);
+
+	if (!cp) {
+		usb_set_device_state(dev, USB_STATE_ADDRESS);
+
+		/* Leave LPM disabled while the device is unconfigured. */
+		usb_autosuspend_device(dev);
+		return ret;
+	}
+	usb_set_device_state(dev, USB_STATE_CONFIGURED);
+
+	if (cp->string == NULL &&
+			!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
+		cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
+
+	/* Now that the interfaces are installed, re-enable LPM. */
+	usb_unlocked_enable_lpm(dev);
+	/* Enable LTM if it was turned off by usb_disable_device. */
+	usb_enable_ltm(dev);
+
+	/* Now that all the interfaces are set up, register them
+	 * to trigger binding of drivers to interfaces.  probe()
+	 * routines may install different altsettings and may
+	 * claim() any interfaces not yet bound.  Many class drivers
+	 * need that: CDC, audio, video, etc.
+	 */
+	for (i = 0; i < nintf; ++i) {
+		struct usb_interface *intf = cp->interface[i];
+
+		if (intf->dev.of_node &&
+		    !of_device_is_available(intf->dev.of_node)) {
+			dev_info(&dev->dev, "skipping disabled interface %d\n",
+				 intf->cur_altsetting->desc.bInterfaceNumber);
+			continue;
+		}
+
+		dev_dbg(&dev->dev,
+			"adding %s (config #%d, interface %d)\n",
+			dev_name(&intf->dev), configuration,
+			intf->cur_altsetting->desc.bInterfaceNumber);
+		device_enable_async_suspend(&intf->dev);
+		ret = device_add(&intf->dev);
+		if (ret != 0) {
+			dev_err(&dev->dev, "device_add(%s) --> %d\n",
+				dev_name(&intf->dev), ret);
+			continue;
+		}
+		create_intf_ep_devs(intf);
+	}
+
+	usb_autosuspend_device(dev);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_set_configuration);
+
+static LIST_HEAD(set_config_list);
+static DEFINE_SPINLOCK(set_config_lock);
+
+struct set_config_request {
+	struct usb_device	*udev;
+	int			config;
+	struct work_struct	work;
+	struct list_head	node;
+};
+
+/* Worker routine for usb_driver_set_configuration() */
+static void driver_set_config_work(struct work_struct *work)
+{
+	struct set_config_request *req =
+		container_of(work, struct set_config_request, work);
+	struct usb_device *udev = req->udev;
+
+	usb_lock_device(udev);
+	spin_lock(&set_config_lock);
+	list_del(&req->node);
+	spin_unlock(&set_config_lock);
+
+	if (req->config >= -1)		/* Is req still valid? */
+		usb_set_configuration(udev, req->config);
+	usb_unlock_device(udev);
+	usb_put_dev(udev);
+	kfree(req);
+}
+
+/* Cancel pending Set-Config requests for a device whose configuration
+ * was just changed
+ */
+static void cancel_async_set_config(struct usb_device *udev)
+{
+	struct set_config_request *req;
+
+	spin_lock(&set_config_lock);
+	list_for_each_entry(req, &set_config_list, node) {
+		if (req->udev == udev)
+			req->config = -999;	/* Mark as cancelled */
+	}
+	spin_unlock(&set_config_lock);
+}
+
+/**
+ * usb_driver_set_configuration - Provide a way for drivers to change device configurations
+ * @udev: the device whose configuration is being updated
+ * @config: the configuration being chosen.
+ * Context: In process context, must be able to sleep
+ *
+ * Device interface drivers are not allowed to change device configurations.
+ * This is because changing configurations will destroy the interface the
+ * driver is bound to and create new ones; it would be like a floppy-disk
+ * driver telling the computer to replace the floppy-disk drive with a
+ * tape drive!
+ *
+ * Still, in certain specialized circumstances the need may arise.  This
+ * routine gets around the normal restrictions by using a work thread to
+ * submit the change-config request.
+ *
+ * Return: 0 if the request was successfully queued, error code otherwise.
+ * The caller has no way to know whether the queued request will eventually
+ * succeed.
+ */
+int usb_driver_set_configuration(struct usb_device *udev, int config)
+{
+	struct set_config_request *req;
+
+	req = kmalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+	req->udev = udev;
+	req->config = config;
+	INIT_WORK(&req->work, driver_set_config_work);
+
+	spin_lock(&set_config_lock);
+	list_add(&req->node, &set_config_list);
+	spin_unlock(&set_config_lock);
+
+	usb_get_dev(udev);
+	schedule_work(&req->work);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_driver_set_configuration);
+
+/**
+ * cdc_parse_cdc_header - parse the extra headers present in CDC devices
+ * @hdr: the place to put the results of the parsing
+ * @intf: the interface for which parsing is requested
+ * @buffer: pointer to the extra headers to be parsed
+ * @buflen: length of the extra headers
+ *
+ * This evaluates the extra headers present in CDC devices which
+ * bind the interfaces for data and control and provide details
+ * about the capabilities of the device.
+ *
+ * Return: number of descriptors parsed or -EINVAL
+ * if the header is contradictory beyond salvage
+ */
+
+int cdc_parse_cdc_header(struct usb_cdc_parsed_header *hdr,
+				struct usb_interface *intf,
+				u8 *buffer,
+				int buflen)
+{
+	/* duplicates are ignored */
+	struct usb_cdc_union_desc *union_header = NULL;
+
+	/* duplicates are not tolerated */
+	struct usb_cdc_header_desc *header = NULL;
+	struct usb_cdc_ether_desc *ether = NULL;
+	struct usb_cdc_mdlm_detail_desc *detail = NULL;
+	struct usb_cdc_mdlm_desc *desc = NULL;
+
+	unsigned int elength;
+	int cnt = 0;
+
+	memset(hdr, 0x00, sizeof(struct usb_cdc_parsed_header));
+	hdr->phonet_magic_present = false;
+	while (buflen > 0) {
+		elength = buffer[0];
+		if (!elength) {
+			dev_err(&intf->dev, "skipping garbage byte\n");
+			elength = 1;
+			goto next_desc;
+		}
+		if ((buflen < elength) || (elength < 3)) {
+			dev_err(&intf->dev, "invalid descriptor buffer length\n");
+			break;
+		}
+		if (buffer[1] != USB_DT_CS_INTERFACE) {
+			dev_err(&intf->dev, "skipping garbage\n");
+			goto next_desc;
+		}
+
+		switch (buffer[2]) {
+		case USB_CDC_UNION_TYPE: /* we've found it */
+			if (elength < sizeof(struct usb_cdc_union_desc))
+				goto next_desc;
+			if (union_header) {
+				dev_err(&intf->dev, "More than one union descriptor, skipping ...\n");
+				goto next_desc;
+			}
+			union_header = (struct usb_cdc_union_desc *)buffer;
+			break;
+		case USB_CDC_COUNTRY_TYPE:
+			if (elength < sizeof(struct usb_cdc_country_functional_desc))
+				goto next_desc;
+			hdr->usb_cdc_country_functional_desc =
+				(struct usb_cdc_country_functional_desc *)buffer;
+			break;
+		case USB_CDC_HEADER_TYPE:
+			if (elength != sizeof(struct usb_cdc_header_desc))
+				goto next_desc;
+			if (header)
+				return -EINVAL;
+			header = (struct usb_cdc_header_desc *)buffer;
+			break;
+		case USB_CDC_ACM_TYPE:
+			if (elength < sizeof(struct usb_cdc_acm_descriptor))
+				goto next_desc;
+			hdr->usb_cdc_acm_descriptor =
+				(struct usb_cdc_acm_descriptor *)buffer;
+			break;
+		case USB_CDC_ETHERNET_TYPE:
+			if (elength != sizeof(struct usb_cdc_ether_desc))
+				goto next_desc;
+			if (ether)
+				return -EINVAL;
+			ether = (struct usb_cdc_ether_desc *)buffer;
+			break;
+		case USB_CDC_CALL_MANAGEMENT_TYPE:
+			if (elength < sizeof(struct usb_cdc_call_mgmt_descriptor))
+				goto next_desc;
+			hdr->usb_cdc_call_mgmt_descriptor =
+				(struct usb_cdc_call_mgmt_descriptor *)buffer;
+			break;
+		case USB_CDC_DMM_TYPE:
+			if (elength < sizeof(struct usb_cdc_dmm_desc))
+				goto next_desc;
+			hdr->usb_cdc_dmm_desc =
+				(struct usb_cdc_dmm_desc *)buffer;
+			break;
+		case USB_CDC_MDLM_TYPE:
+			if (elength < sizeof(struct usb_cdc_mdlm_desc))
+				goto next_desc;
+			if (desc)
+				return -EINVAL;
+			desc = (struct usb_cdc_mdlm_desc *)buffer;
+			break;
+		case USB_CDC_MDLM_DETAIL_TYPE:
+			if (elength < sizeof(struct usb_cdc_mdlm_detail_desc))
+				goto next_desc;
+			if (detail)
+				return -EINVAL;
+			detail = (struct usb_cdc_mdlm_detail_desc *)buffer;
+			break;
+		case USB_CDC_NCM_TYPE:
+			if (elength < sizeof(struct usb_cdc_ncm_desc))
+				goto next_desc;
+			hdr->usb_cdc_ncm_desc = (struct usb_cdc_ncm_desc *)buffer;
+			break;
+		case USB_CDC_MBIM_TYPE:
+			if (elength < sizeof(struct usb_cdc_mbim_desc))
+				goto next_desc;
+
+			hdr->usb_cdc_mbim_desc = (struct usb_cdc_mbim_desc *)buffer;
+			break;
+		case USB_CDC_MBIM_EXTENDED_TYPE:
+			if (elength < sizeof(struct usb_cdc_mbim_extended_desc))
+				break;
+			hdr->usb_cdc_mbim_extended_desc =
+				(struct usb_cdc_mbim_extended_desc *)buffer;
+			break;
+		case CDC_PHONET_MAGIC_NUMBER:
+			hdr->phonet_magic_present = true;
+			break;
+		default:
+			/*
+			 * there are LOTS more CDC descriptors that
+			 * could legitimately be found here.
+			 */
+			dev_dbg(&intf->dev, "Ignoring descriptor: type %02x, length %ud\n",
+					buffer[2], elength);
+			goto next_desc;
+		}
+		cnt++;
+next_desc:
+		buflen -= elength;
+		buffer += elength;
+	}
+	hdr->usb_cdc_union_desc = union_header;
+	hdr->usb_cdc_header_desc = header;
+	hdr->usb_cdc_mdlm_detail_desc = detail;
+	hdr->usb_cdc_mdlm_desc = desc;
+	hdr->usb_cdc_ether_desc = ether;
+	return cnt;
+}
+
+EXPORT_SYMBOL(cdc_parse_cdc_header);
diff --git a/drivers/usb/core/notify.c b/drivers/usb/core/notify.c
new file mode 100644
index 000000000..e61436637
--- /dev/null
+++ b/drivers/usb/core/notify.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * All the USB notify logic
+ *
+ * (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * notifier functions originally based on those in kernel/sys.c
+ * but fixed up to not be so broken.
+ *
+ * Released under the GPLv2 only.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/notifier.h>
+#include <linux/usb.h>
+#include <linux/mutex.h>
+#include "usb.h"
+
+static BLOCKING_NOTIFIER_HEAD(usb_notifier_list);
+
+/**
+ * usb_register_notify - register a notifier callback whenever a usb change happens
+ * @nb: pointer to the notifier block for the callback events.
+ *
+ * These changes are either USB devices or busses being added or removed.
+ */
+void usb_register_notify(struct notifier_block *nb)
+{
+	blocking_notifier_chain_register(&usb_notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(usb_register_notify);
+
+/**
+ * usb_unregister_notify - unregister a notifier callback
+ * @nb: pointer to the notifier block for the callback events.
+ *
+ * usb_register_notify() must have been previously called for this function
+ * to work properly.
+ */
+void usb_unregister_notify(struct notifier_block *nb)
+{
+	blocking_notifier_chain_unregister(&usb_notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(usb_unregister_notify);
+
+
+void usb_notify_add_device(struct usb_device *udev)
+{
+	blocking_notifier_call_chain(&usb_notifier_list, USB_DEVICE_ADD, udev);
+}
+
+void usb_notify_remove_device(struct usb_device *udev)
+{
+	blocking_notifier_call_chain(&usb_notifier_list,
+			USB_DEVICE_REMOVE, udev);
+}
+
+void usb_notify_add_bus(struct usb_bus *ubus)
+{
+	blocking_notifier_call_chain(&usb_notifier_list, USB_BUS_ADD, ubus);
+}
+
+void usb_notify_remove_bus(struct usb_bus *ubus)
+{
+	blocking_notifier_call_chain(&usb_notifier_list, USB_BUS_REMOVE, ubus);
+}
diff --git a/drivers/usb/core/of.c b/drivers/usb/core/of.c
new file mode 100644
index 000000000..617e92569
--- /dev/null
+++ b/drivers/usb/core/of.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * of.c		The helpers for hcd device tree support
+ *
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *	Author: Peter Chen <peter.chen@freescale.com>
+ * Copyright (C) 2017 Johan Hovold <johan@kernel.org>
+ */
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/usb/of.h>
+
+/**
+ * usb_of_get_device_node() - get a USB device node
+ * @hub: hub to which device is connected
+ * @port1: one-based index of port
+ *
+ * Look up the node of a USB device given its parent hub device and one-based
+ * port number.
+ *
+ * Return: A pointer to the node with incremented refcount if found, or
+ * %NULL otherwise.
+ */
+struct device_node *usb_of_get_device_node(struct usb_device *hub, int port1)
+{
+	struct device_node *node;
+	u32 reg;
+
+	for_each_child_of_node(hub->dev.of_node, node) {
+		if (of_property_read_u32(node, "reg", &reg))
+			continue;
+
+		if (reg == port1)
+			return node;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(usb_of_get_device_node);
+
+/**
+ * usb_of_has_combined_node() - determine whether a device has a combined node
+ * @udev: USB device
+ *
+ * Determine whether a USB device has a so called combined node which is
+ * shared with its sole interface. This is the case if and only if the device
+ * has a node and its descriptors report the following:
+ *
+ *	1) bDeviceClass is 0 or 9, and
+ *	2) bNumConfigurations is 1, and
+ *	3) bNumInterfaces is 1.
+ *
+ * Return: True iff the device has a device node and its descriptors match the
+ * criteria for a combined node.
+ */
+bool usb_of_has_combined_node(struct usb_device *udev)
+{
+	struct usb_device_descriptor *ddesc = &udev->descriptor;
+	struct usb_config_descriptor *cdesc;
+
+	if (!udev->dev.of_node)
+		return false;
+
+	switch (ddesc->bDeviceClass) {
+	case USB_CLASS_PER_INTERFACE:
+	case USB_CLASS_HUB:
+		if (ddesc->bNumConfigurations == 1) {
+			cdesc = &udev->config->desc;
+			if (cdesc->bNumInterfaces == 1)
+				return true;
+		}
+	}
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(usb_of_has_combined_node);
+
+/**
+ * usb_of_get_interface_node() - get a USB interface node
+ * @udev: USB device of interface
+ * @config: configuration value
+ * @ifnum: interface number
+ *
+ * Look up the node of a USB interface given its USB device, configuration
+ * value and interface number.
+ *
+ * Return: A pointer to the node with incremented refcount if found, or
+ * %NULL otherwise.
+ */
+struct device_node *
+usb_of_get_interface_node(struct usb_device *udev, u8 config, u8 ifnum)
+{
+	struct device_node *node;
+	u32 reg[2];
+
+	for_each_child_of_node(udev->dev.of_node, node) {
+		if (of_property_read_u32_array(node, "reg", reg, 2))
+			continue;
+
+		if (reg[0] == ifnum && reg[1] == config)
+			return node;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(usb_of_get_interface_node);
diff --git a/drivers/usb/core/otg_productlist.h b/drivers/usb/core/otg_productlist.h
new file mode 100644
index 000000000..db67df29f
--- /dev/null
+++ b/drivers/usb/core/otg_productlist.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright (C) 2004 Texas Instruments */
+
+/*
+ * This OTG and Embedded Host list is "Targeted Peripheral List".
+ * It should mostly use of USB_DEVICE() or USB_DEVICE_VER() entries..
+ *
+ * YOU _SHOULD_ CHANGE THIS LIST TO MATCH YOUR PRODUCT AND ITS TESTING!
+ */
+
+static struct usb_device_id productlist_table[] = {
+
+/* hubs are optional in OTG, but very handy ... */
+{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), },
+{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), },
+
+#ifdef	CONFIG_USB_PRINTER		/* ignoring nonstatic linkage! */
+/* FIXME actually, printers are NOT supposed to use device classes;
+ * they're supposed to use interface classes...
+ */
+{ USB_DEVICE_INFO(7, 1, 1) },
+{ USB_DEVICE_INFO(7, 1, 2) },
+{ USB_DEVICE_INFO(7, 1, 3) },
+#endif
+
+#ifdef	CONFIG_USB_NET_CDCETHER
+/* Linux-USB CDC Ethernet gadget */
+{ USB_DEVICE(0x0525, 0xa4a1), },
+/* Linux-USB CDC Ethernet + RNDIS gadget */
+{ USB_DEVICE(0x0525, 0xa4a2), },
+#endif
+
+#if	IS_ENABLED(CONFIG_USB_TEST)
+/* gadget zero, for testing */
+{ USB_DEVICE(0x0525, 0xa4a0), },
+#endif
+
+{ }	/* Terminating entry */
+};
+
+static int is_targeted(struct usb_device *dev)
+{
+	struct usb_device_id	*id = productlist_table;
+
+	/* HNP test device is _never_ targeted (see OTG spec 6.6.6) */
+	if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a &&
+	     le16_to_cpu(dev->descriptor.idProduct) == 0xbadd))
+		return 0;
+
+	/* OTG PET device is always targeted (see OTG 2.0 ECN 6.4.2) */
+	if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a &&
+	     le16_to_cpu(dev->descriptor.idProduct) == 0x0200))
+		return 1;
+
+	/* NOTE: can't use usb_match_id() since interface caches
+	 * aren't set up yet. this is cut/paste from that code.
+	 */
+	for (id = productlist_table; id->match_flags; id++) {
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
+		    id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
+		    id->idProduct != le16_to_cpu(dev->descriptor.idProduct))
+			continue;
+
+		/* No need to test id->bcdDevice_lo != 0, since 0 is never
+		   greater than any unsigned number. */
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
+		    (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice)))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
+		    (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice)))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
+		    (id->bDeviceClass != dev->descriptor.bDeviceClass))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
+		    (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
+		    (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
+			continue;
+
+		return 1;
+	}
+
+	/* add other match criteria here ... */
+
+
+	/* OTG MESSAGE: report errors here, customize to match your product */
+	dev_err(&dev->dev, "device v%04x p%04x is not supported\n",
+		le16_to_cpu(dev->descriptor.idVendor),
+		le16_to_cpu(dev->descriptor.idProduct));
+
+	return 0;
+}
+
diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c
new file mode 100644
index 000000000..fb1588e7c
--- /dev/null
+++ b/drivers/usb/core/phy.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * A wrapper for multiple PHYs which passes all phy_* function calls to
+ * multiple (actual) PHY devices. This is comes handy when initializing
+ * all PHYs on a HCD and to keep them all in the same state.
+ *
+ * Copyright (C) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/phy/phy.h>
+#include <linux/of.h>
+
+#include "phy.h"
+
+struct usb_phy_roothub {
+	struct phy		*phy;
+	struct list_head	list;
+};
+
+static int usb_phy_roothub_add_phy(struct device *dev, int index,
+				   struct list_head *list)
+{
+	struct usb_phy_roothub *roothub_entry;
+	struct phy *phy;
+
+	phy = devm_of_phy_get_by_index(dev, dev->of_node, index);
+	if (IS_ERR(phy)) {
+		if (PTR_ERR(phy) == -ENODEV)
+			return 0;
+		else
+			return PTR_ERR(phy);
+	}
+
+	roothub_entry = devm_kzalloc(dev, sizeof(*roothub_entry), GFP_KERNEL);
+	if (!roothub_entry)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&roothub_entry->list);
+
+	roothub_entry->phy = phy;
+
+	list_add_tail(&roothub_entry->list, list);
+
+	return 0;
+}
+
+struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev)
+{
+	struct usb_phy_roothub *phy_roothub;
+	int i, num_phys, err;
+
+	if (!IS_ENABLED(CONFIG_GENERIC_PHY))
+		return NULL;
+
+	num_phys = of_count_phandle_with_args(dev->of_node, "phys",
+					      "#phy-cells");
+	if (num_phys <= 0)
+		return NULL;
+
+	phy_roothub = devm_kzalloc(dev, sizeof(*phy_roothub), GFP_KERNEL);
+	if (!phy_roothub)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_LIST_HEAD(&phy_roothub->list);
+
+	for (i = 0; i < num_phys; i++) {
+		err = usb_phy_roothub_add_phy(dev, i, &phy_roothub->list);
+		if (err)
+			return ERR_PTR(err);
+	}
+
+	return phy_roothub;
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_alloc);
+
+int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub)
+{
+	struct usb_phy_roothub *roothub_entry;
+	struct list_head *head;
+	int err;
+
+	if (!phy_roothub)
+		return 0;
+
+	head = &phy_roothub->list;
+
+	list_for_each_entry(roothub_entry, head, list) {
+		err = phy_init(roothub_entry->phy);
+		if (err)
+			goto err_exit_phys;
+	}
+
+	return 0;
+
+err_exit_phys:
+	list_for_each_entry_continue_reverse(roothub_entry, head, list)
+		phy_exit(roothub_entry->phy);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_init);
+
+int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub)
+{
+	struct usb_phy_roothub *roothub_entry;
+	struct list_head *head;
+	int err, ret = 0;
+
+	if (!phy_roothub)
+		return 0;
+
+	head = &phy_roothub->list;
+
+	list_for_each_entry(roothub_entry, head, list) {
+		err = phy_exit(roothub_entry->phy);
+		if (err)
+			ret = err;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_exit);
+
+int usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub,
+			     enum phy_mode mode)
+{
+	struct usb_phy_roothub *roothub_entry;
+	struct list_head *head;
+	int err;
+
+	if (!phy_roothub)
+		return 0;
+
+	head = &phy_roothub->list;
+
+	list_for_each_entry(roothub_entry, head, list) {
+		err = phy_set_mode(roothub_entry->phy, mode);
+		if (err)
+			goto err_out;
+	}
+
+	return 0;
+
+err_out:
+	list_for_each_entry_continue_reverse(roothub_entry, head, list)
+		phy_power_off(roothub_entry->phy);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_set_mode);
+
+int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub)
+{
+	struct usb_phy_roothub *roothub_entry;
+	struct list_head *head;
+	int err;
+
+	if (!phy_roothub)
+		return 0;
+
+	head = &phy_roothub->list;
+
+	list_for_each_entry(roothub_entry, head, list) {
+		err = phy_calibrate(roothub_entry->phy);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_calibrate);
+
+int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub)
+{
+	struct usb_phy_roothub *roothub_entry;
+	struct list_head *head;
+	int err;
+
+	if (!phy_roothub)
+		return 0;
+
+	head = &phy_roothub->list;
+
+	list_for_each_entry(roothub_entry, head, list) {
+		err = phy_power_on(roothub_entry->phy);
+		if (err)
+			goto err_out;
+	}
+
+	return 0;
+
+err_out:
+	list_for_each_entry_continue_reverse(roothub_entry, head, list)
+		phy_power_off(roothub_entry->phy);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_power_on);
+
+void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub)
+{
+	struct usb_phy_roothub *roothub_entry;
+
+	if (!phy_roothub)
+		return;
+
+	list_for_each_entry_reverse(roothub_entry, &phy_roothub->list, list)
+		phy_power_off(roothub_entry->phy);
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_power_off);
+
+int usb_phy_roothub_suspend(struct device *controller_dev,
+			    struct usb_phy_roothub *phy_roothub)
+{
+	usb_phy_roothub_power_off(phy_roothub);
+
+	/* keep the PHYs initialized so the device can wake up the system */
+	if (device_may_wakeup(controller_dev))
+		return 0;
+
+	return usb_phy_roothub_exit(phy_roothub);
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_suspend);
+
+int usb_phy_roothub_resume(struct device *controller_dev,
+			   struct usb_phy_roothub *phy_roothub)
+{
+	int err;
+
+	/* if the device can't wake up the system _exit was called */
+	if (!device_may_wakeup(controller_dev)) {
+		err = usb_phy_roothub_init(phy_roothub);
+		if (err)
+			return err;
+	}
+
+	err = usb_phy_roothub_power_on(phy_roothub);
+
+	/* undo _init if _power_on failed */
+	if (err && !device_may_wakeup(controller_dev))
+		usb_phy_roothub_exit(phy_roothub);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_resume);
diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h
new file mode 100644
index 000000000..20a267cd9
--- /dev/null
+++ b/drivers/usb/core/phy.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * USB roothub wrapper
+ *
+ * Copyright (C) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+#ifndef __USB_CORE_PHY_H_
+#define __USB_CORE_PHY_H_
+
+struct device;
+struct usb_phy_roothub;
+
+struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev);
+
+int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub);
+int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub);
+
+int usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub,
+			     enum phy_mode mode);
+int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub);
+int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub);
+void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub);
+
+int usb_phy_roothub_suspend(struct device *controller_dev,
+			    struct usb_phy_roothub *phy_roothub);
+int usb_phy_roothub_resume(struct device *controller_dev,
+			   struct usb_phy_roothub *phy_roothub);
+
+#endif /* __USB_CORE_PHY_H_ */
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
new file mode 100644
index 000000000..38c1a4f4f
--- /dev/null
+++ b/drivers/usb/core/port.c
@@ -0,0 +1,741 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * usb port device code
+ *
+ * Copyright (C) 2012 Intel Corp
+ *
+ * Author: Lan Tianyu <tianyu.lan@intel.com>
+ */
+
+#include <linux/slab.h>
+#include <linux/pm_qos.h>
+#include <linux/component.h>
+
+#include "hub.h"
+
+static int usb_port_block_power_off;
+
+static const struct attribute_group *port_dev_group[];
+
+static ssize_t disable_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+	struct usb_device *hdev = to_usb_device(dev->parent->parent);
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+	struct usb_interface *intf = to_usb_interface(hub->intfdev);
+	int port1 = port_dev->portnum;
+	u16 portstatus, unused;
+	bool disabled;
+	int rc;
+
+	rc = usb_autopm_get_interface(intf);
+	if (rc < 0)
+		return rc;
+
+	usb_lock_device(hdev);
+	if (hub->disconnected) {
+		rc = -ENODEV;
+		goto out_hdev_lock;
+	}
+
+	usb_hub_port_status(hub, port1, &portstatus, &unused);
+	disabled = !usb_port_is_power_on(hub, portstatus);
+
+out_hdev_lock:
+	usb_unlock_device(hdev);
+	usb_autopm_put_interface(intf);
+
+	if (rc)
+		return rc;
+
+	return sysfs_emit(buf, "%s\n", disabled ? "1" : "0");
+}
+
+static ssize_t disable_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+	struct usb_device *hdev = to_usb_device(dev->parent->parent);
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+	struct usb_interface *intf = to_usb_interface(hub->intfdev);
+	int port1 = port_dev->portnum;
+	bool disabled;
+	int rc;
+
+	rc = strtobool(buf, &disabled);
+	if (rc)
+		return rc;
+
+	rc = usb_autopm_get_interface(intf);
+	if (rc < 0)
+		return rc;
+
+	usb_lock_device(hdev);
+	if (hub->disconnected) {
+		rc = -ENODEV;
+		goto out_hdev_lock;
+	}
+
+	if (disabled && port_dev->child)
+		usb_disconnect(&port_dev->child);
+
+	rc = usb_hub_set_port_power(hdev, hub, port1, !disabled);
+
+	if (disabled) {
+		usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
+		if (!port_dev->is_superspeed)
+			usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE);
+	}
+
+	if (!rc)
+		rc = count;
+
+out_hdev_lock:
+	usb_unlock_device(hdev);
+	usb_autopm_put_interface(intf);
+
+	return rc;
+}
+static DEVICE_ATTR_RW(disable);
+
+static ssize_t location_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+
+	return sprintf(buf, "0x%08x\n", port_dev->location);
+}
+static DEVICE_ATTR_RO(location);
+
+static ssize_t connect_type_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+	char *result;
+
+	switch (port_dev->connect_type) {
+	case USB_PORT_CONNECT_TYPE_HOT_PLUG:
+		result = "hotplug";
+		break;
+	case USB_PORT_CONNECT_TYPE_HARD_WIRED:
+		result = "hardwired";
+		break;
+	case USB_PORT_NOT_USED:
+		result = "not used";
+		break;
+	default:
+		result = "unknown";
+		break;
+	}
+
+	return sprintf(buf, "%s\n", result);
+}
+static DEVICE_ATTR_RO(connect_type);
+
+static ssize_t over_current_count_show(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+
+	return sprintf(buf, "%u\n", port_dev->over_current_count);
+}
+static DEVICE_ATTR_RO(over_current_count);
+
+static ssize_t quirks_show(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+
+	return sprintf(buf, "%08x\n", port_dev->quirks);
+}
+
+static ssize_t quirks_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+	u32 value;
+
+	if (kstrtou32(buf, 16, &value))
+		return -EINVAL;
+
+	port_dev->quirks = value;
+	return count;
+}
+static DEVICE_ATTR_RW(quirks);
+
+static ssize_t usb3_lpm_permit_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+	const char *p;
+
+	if (port_dev->usb3_lpm_u1_permit) {
+		if (port_dev->usb3_lpm_u2_permit)
+			p = "u1_u2";
+		else
+			p = "u1";
+	} else {
+		if (port_dev->usb3_lpm_u2_permit)
+			p = "u2";
+		else
+			p = "0";
+	}
+
+	return sprintf(buf, "%s\n", p);
+}
+
+static ssize_t usb3_lpm_permit_store(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+	struct usb_device *udev = port_dev->child;
+	struct usb_hcd *hcd;
+
+	if (!strncmp(buf, "u1_u2", 5)) {
+		port_dev->usb3_lpm_u1_permit = 1;
+		port_dev->usb3_lpm_u2_permit = 1;
+
+	} else if (!strncmp(buf, "u1", 2)) {
+		port_dev->usb3_lpm_u1_permit = 1;
+		port_dev->usb3_lpm_u2_permit = 0;
+
+	} else if (!strncmp(buf, "u2", 2)) {
+		port_dev->usb3_lpm_u1_permit = 0;
+		port_dev->usb3_lpm_u2_permit = 1;
+
+	} else if (!strncmp(buf, "0", 1)) {
+		port_dev->usb3_lpm_u1_permit = 0;
+		port_dev->usb3_lpm_u2_permit = 0;
+	} else
+		return -EINVAL;
+
+	/* If device is connected to the port, disable or enable lpm
+	 * to make new u1 u2 setting take effect immediately.
+	 */
+	if (udev) {
+		hcd = bus_to_hcd(udev->bus);
+		if (!hcd)
+			return -EINVAL;
+		usb_lock_device(udev);
+		mutex_lock(hcd->bandwidth_mutex);
+		if (!usb_disable_lpm(udev))
+			usb_enable_lpm(udev);
+		mutex_unlock(hcd->bandwidth_mutex);
+		usb_unlock_device(udev);
+	}
+
+	return count;
+}
+static DEVICE_ATTR_RW(usb3_lpm_permit);
+
+static struct attribute *port_dev_attrs[] = {
+	&dev_attr_connect_type.attr,
+	&dev_attr_location.attr,
+	&dev_attr_quirks.attr,
+	&dev_attr_over_current_count.attr,
+	&dev_attr_disable.attr,
+	NULL,
+};
+
+static const struct attribute_group port_dev_attr_grp = {
+	.attrs = port_dev_attrs,
+};
+
+static const struct attribute_group *port_dev_group[] = {
+	&port_dev_attr_grp,
+	NULL,
+};
+
+static struct attribute *port_dev_usb3_attrs[] = {
+	&dev_attr_usb3_lpm_permit.attr,
+	NULL,
+};
+
+static const struct attribute_group port_dev_usb3_attr_grp = {
+	.attrs = port_dev_usb3_attrs,
+};
+
+static const struct attribute_group *port_dev_usb3_group[] = {
+	&port_dev_attr_grp,
+	&port_dev_usb3_attr_grp,
+	NULL,
+};
+
+static void usb_port_device_release(struct device *dev)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+
+	kfree(port_dev->req);
+	kfree(port_dev);
+}
+
+#ifdef CONFIG_PM
+static int usb_port_runtime_resume(struct device *dev)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+	struct usb_device *hdev = to_usb_device(dev->parent->parent);
+	struct usb_interface *intf = to_usb_interface(dev->parent);
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+	struct usb_device *udev = port_dev->child;
+	struct usb_port *peer = port_dev->peer;
+	int port1 = port_dev->portnum;
+	int retval;
+
+	if (!hub)
+		return -EINVAL;
+	if (hub->in_reset) {
+		set_bit(port1, hub->power_bits);
+		return 0;
+	}
+
+	/*
+	 * Power on our usb3 peer before this usb2 port to prevent a usb3
+	 * device from degrading to its usb2 connection
+	 */
+	if (!port_dev->is_superspeed && peer)
+		pm_runtime_get_sync(&peer->dev);
+
+	retval = usb_autopm_get_interface(intf);
+	if (retval < 0)
+		return retval;
+
+	retval = usb_hub_set_port_power(hdev, hub, port1, true);
+	msleep(hub_power_on_good_delay(hub));
+	if (udev && !retval) {
+		/*
+		 * Our preference is to simply wait for the port to reconnect,
+		 * as that is the lowest latency method to restart the port.
+		 * However, there are cases where toggling port power results in
+		 * the host port and the device port getting out of sync causing
+		 * a link training live lock.  Upon timeout, flag the port as
+		 * needing warm reset recovery (to be performed later by
+		 * usb_port_resume() as requested via usb_wakeup_notification())
+		 */
+		if (hub_port_debounce_be_connected(hub, port1) < 0) {
+			dev_dbg(&port_dev->dev, "reconnect timeout\n");
+			if (hub_is_superspeed(hdev))
+				set_bit(port1, hub->warm_reset_bits);
+		}
+
+		/* Force the child awake to revalidate after the power loss. */
+		if (!test_and_set_bit(port1, hub->child_usage_bits)) {
+			pm_runtime_get_noresume(&port_dev->dev);
+			pm_request_resume(&udev->dev);
+		}
+	}
+
+	usb_autopm_put_interface(intf);
+
+	return retval;
+}
+
+static int usb_port_runtime_suspend(struct device *dev)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+	struct usb_device *hdev = to_usb_device(dev->parent->parent);
+	struct usb_interface *intf = to_usb_interface(dev->parent);
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+	struct usb_port *peer = port_dev->peer;
+	int port1 = port_dev->portnum;
+	int retval;
+
+	if (!hub)
+		return -EINVAL;
+	if (hub->in_reset)
+		return -EBUSY;
+
+	if (dev_pm_qos_flags(&port_dev->dev, PM_QOS_FLAG_NO_POWER_OFF)
+			== PM_QOS_FLAGS_ALL)
+		return -EAGAIN;
+
+	if (usb_port_block_power_off)
+		return -EBUSY;
+
+	retval = usb_autopm_get_interface(intf);
+	if (retval < 0)
+		return retval;
+
+	retval = usb_hub_set_port_power(hdev, hub, port1, false);
+	usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
+	if (!port_dev->is_superspeed)
+		usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE);
+	usb_autopm_put_interface(intf);
+
+	/*
+	 * Our peer usb3 port may now be able to suspend, so
+	 * asynchronously queue a suspend request to observe that this
+	 * usb2 port is now off.
+	 */
+	if (!port_dev->is_superspeed && peer)
+		pm_runtime_put(&peer->dev);
+
+	return retval;
+}
+#endif
+
+static void usb_port_shutdown(struct device *dev)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+
+	if (port_dev->child)
+		usb_disable_usb2_hardware_lpm(port_dev->child);
+}
+
+static const struct dev_pm_ops usb_port_pm_ops = {
+#ifdef CONFIG_PM
+	.runtime_suspend =	usb_port_runtime_suspend,
+	.runtime_resume =	usb_port_runtime_resume,
+#endif
+};
+
+struct device_type usb_port_device_type = {
+	.name =		"usb_port",
+	.release =	usb_port_device_release,
+	.pm =		&usb_port_pm_ops,
+};
+
+static struct device_driver usb_port_driver = {
+	.name = "usb",
+	.owner = THIS_MODULE,
+	.shutdown = usb_port_shutdown,
+};
+
+static int link_peers(struct usb_port *left, struct usb_port *right)
+{
+	struct usb_port *ss_port, *hs_port;
+	int rc;
+
+	if (left->peer == right && right->peer == left)
+		return 0;
+
+	if (left->peer || right->peer) {
+		struct usb_port *lpeer = left->peer;
+		struct usb_port *rpeer = right->peer;
+		char *method;
+
+		if (left->location && left->location == right->location)
+			method = "location";
+		else
+			method = "default";
+
+		pr_debug("usb: failed to peer %s and %s by %s (%s:%s) (%s:%s)\n",
+			dev_name(&left->dev), dev_name(&right->dev), method,
+			dev_name(&left->dev),
+			lpeer ? dev_name(&lpeer->dev) : "none",
+			dev_name(&right->dev),
+			rpeer ? dev_name(&rpeer->dev) : "none");
+		return -EBUSY;
+	}
+
+	rc = sysfs_create_link(&left->dev.kobj, &right->dev.kobj, "peer");
+	if (rc)
+		return rc;
+	rc = sysfs_create_link(&right->dev.kobj, &left->dev.kobj, "peer");
+	if (rc) {
+		sysfs_remove_link(&left->dev.kobj, "peer");
+		return rc;
+	}
+
+	/*
+	 * We need to wake the HiSpeed port to make sure we don't race
+	 * setting ->peer with usb_port_runtime_suspend().  Otherwise we
+	 * may miss a suspend event for the SuperSpeed port.
+	 */
+	if (left->is_superspeed) {
+		ss_port = left;
+		WARN_ON(right->is_superspeed);
+		hs_port = right;
+	} else {
+		ss_port = right;
+		WARN_ON(!right->is_superspeed);
+		hs_port = left;
+	}
+	pm_runtime_get_sync(&hs_port->dev);
+
+	left->peer = right;
+	right->peer = left;
+
+	/*
+	 * The SuperSpeed reference is dropped when the HiSpeed port in
+	 * this relationship suspends, i.e. when it is safe to allow a
+	 * SuperSpeed connection to drop since there is no risk of a
+	 * device degrading to its powered-off HiSpeed connection.
+	 *
+	 * Also, drop the HiSpeed ref taken above.
+	 */
+	pm_runtime_get_sync(&ss_port->dev);
+	pm_runtime_put(&hs_port->dev);
+
+	return 0;
+}
+
+static void link_peers_report(struct usb_port *left, struct usb_port *right)
+{
+	int rc;
+
+	rc = link_peers(left, right);
+	if (rc == 0) {
+		dev_dbg(&left->dev, "peered to %s\n", dev_name(&right->dev));
+	} else {
+		dev_dbg(&left->dev, "failed to peer to %s (%d)\n",
+				dev_name(&right->dev), rc);
+		pr_warn_once("usb: port power management may be unreliable\n");
+		usb_port_block_power_off = 1;
+	}
+}
+
+static void unlink_peers(struct usb_port *left, struct usb_port *right)
+{
+	struct usb_port *ss_port, *hs_port;
+
+	WARN(right->peer != left || left->peer != right,
+			"%s and %s are not peers?\n",
+			dev_name(&left->dev), dev_name(&right->dev));
+
+	/*
+	 * We wake the HiSpeed port to make sure we don't race its
+	 * usb_port_runtime_resume() event which takes a SuperSpeed ref
+	 * when ->peer is !NULL.
+	 */
+	if (left->is_superspeed) {
+		ss_port = left;
+		hs_port = right;
+	} else {
+		ss_port = right;
+		hs_port = left;
+	}
+
+	pm_runtime_get_sync(&hs_port->dev);
+
+	sysfs_remove_link(&left->dev.kobj, "peer");
+	right->peer = NULL;
+	sysfs_remove_link(&right->dev.kobj, "peer");
+	left->peer = NULL;
+
+	/* Drop the SuperSpeed ref held on behalf of the active HiSpeed port */
+	pm_runtime_put(&ss_port->dev);
+
+	/* Drop the ref taken above */
+	pm_runtime_put(&hs_port->dev);
+}
+
+/*
+ * For each usb hub device in the system check to see if it is in the
+ * peer domain of the given port_dev, and if it is check to see if it
+ * has a port that matches the given port by location
+ */
+static int match_location(struct usb_device *peer_hdev, void *p)
+{
+	int port1;
+	struct usb_hcd *hcd, *peer_hcd;
+	struct usb_port *port_dev = p, *peer;
+	struct usb_hub *peer_hub = usb_hub_to_struct_hub(peer_hdev);
+	struct usb_device *hdev = to_usb_device(port_dev->dev.parent->parent);
+
+	if (!peer_hub)
+		return 0;
+
+	hcd = bus_to_hcd(hdev->bus);
+	peer_hcd = bus_to_hcd(peer_hdev->bus);
+	/* peer_hcd is provisional until we verify it against the known peer */
+	if (peer_hcd != hcd->shared_hcd)
+		return 0;
+
+	for (port1 = 1; port1 <= peer_hdev->maxchild; port1++) {
+		peer = peer_hub->ports[port1 - 1];
+		if (peer && peer->location == port_dev->location) {
+			link_peers_report(port_dev, peer);
+			return 1; /* done */
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Find the peer port either via explicit platform firmware "location"
+ * data, the peer hcd for root hubs, or the upstream peer relationship
+ * for all other hubs.
+ */
+static void find_and_link_peer(struct usb_hub *hub, int port1)
+{
+	struct usb_port *port_dev = hub->ports[port1 - 1], *peer;
+	struct usb_device *hdev = hub->hdev;
+	struct usb_device *peer_hdev;
+	struct usb_hub *peer_hub;
+
+	/*
+	 * If location data is available then we can only peer this port
+	 * by a location match, not the default peer (lest we create a
+	 * situation where we need to go back and undo a default peering
+	 * when the port is later peered by location data)
+	 */
+	if (port_dev->location) {
+		/* we link the peer in match_location() if found */
+		usb_for_each_dev(port_dev, match_location);
+		return;
+	} else if (!hdev->parent) {
+		struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
+		struct usb_hcd *peer_hcd = hcd->shared_hcd;
+
+		if (!peer_hcd)
+			return;
+
+		peer_hdev = peer_hcd->self.root_hub;
+	} else {
+		struct usb_port *upstream;
+		struct usb_device *parent = hdev->parent;
+		struct usb_hub *parent_hub = usb_hub_to_struct_hub(parent);
+
+		if (!parent_hub)
+			return;
+
+		upstream = parent_hub->ports[hdev->portnum - 1];
+		if (!upstream || !upstream->peer)
+			return;
+
+		peer_hdev = upstream->peer->child;
+	}
+
+	peer_hub = usb_hub_to_struct_hub(peer_hdev);
+	if (!peer_hub || port1 > peer_hdev->maxchild)
+		return;
+
+	/*
+	 * we found a valid default peer, last check is to make sure it
+	 * does not have location data
+	 */
+	peer = peer_hub->ports[port1 - 1];
+	if (peer && peer->location == 0)
+		link_peers_report(port_dev, peer);
+}
+
+static int connector_bind(struct device *dev, struct device *connector, void *data)
+{
+	int ret;
+
+	ret = sysfs_create_link(&dev->kobj, &connector->kobj, "connector");
+	if (ret)
+		return ret;
+
+	ret = sysfs_create_link(&connector->kobj, &dev->kobj, dev_name(dev));
+	if (ret)
+		sysfs_remove_link(&dev->kobj, "connector");
+
+	return ret;
+}
+
+static void connector_unbind(struct device *dev, struct device *connector, void *data)
+{
+	sysfs_remove_link(&connector->kobj, dev_name(dev));
+	sysfs_remove_link(&dev->kobj, "connector");
+}
+
+static const struct component_ops connector_ops = {
+	.bind = connector_bind,
+	.unbind = connector_unbind,
+};
+
+int usb_hub_create_port_device(struct usb_hub *hub, int port1)
+{
+	struct usb_port *port_dev;
+	struct usb_device *hdev = hub->hdev;
+	int retval;
+
+	port_dev = kzalloc(sizeof(*port_dev), GFP_KERNEL);
+	if (!port_dev)
+		return -ENOMEM;
+
+	port_dev->req = kzalloc(sizeof(*(port_dev->req)), GFP_KERNEL);
+	if (!port_dev->req) {
+		kfree(port_dev);
+		return -ENOMEM;
+	}
+
+	hub->ports[port1 - 1] = port_dev;
+	port_dev->portnum = port1;
+	set_bit(port1, hub->power_bits);
+	port_dev->dev.parent = hub->intfdev;
+	if (hub_is_superspeed(hdev)) {
+		port_dev->usb3_lpm_u1_permit = 1;
+		port_dev->usb3_lpm_u2_permit = 1;
+		port_dev->dev.groups = port_dev_usb3_group;
+	} else
+		port_dev->dev.groups = port_dev_group;
+	port_dev->dev.type = &usb_port_device_type;
+	port_dev->dev.driver = &usb_port_driver;
+	if (hub_is_superspeed(hub->hdev))
+		port_dev->is_superspeed = 1;
+	dev_set_name(&port_dev->dev, "%s-port%d", dev_name(&hub->hdev->dev),
+			port1);
+	mutex_init(&port_dev->status_lock);
+	retval = device_register(&port_dev->dev);
+	if (retval) {
+		put_device(&port_dev->dev);
+		return retval;
+	}
+
+	/* Set default policy of port-poweroff disabled. */
+	retval = dev_pm_qos_add_request(&port_dev->dev, port_dev->req,
+			DEV_PM_QOS_FLAGS, PM_QOS_FLAG_NO_POWER_OFF);
+	if (retval < 0) {
+		device_unregister(&port_dev->dev);
+		return retval;
+	}
+
+	retval = component_add(&port_dev->dev, &connector_ops);
+	if (retval) {
+		dev_warn(&port_dev->dev, "failed to add component\n");
+		device_unregister(&port_dev->dev);
+		return retval;
+	}
+
+	find_and_link_peer(hub, port1);
+
+	/*
+	 * Enable runtime pm and hold a refernce that hub_configure()
+	 * will drop once the PM_QOS_NO_POWER_OFF flag state has been set
+	 * and the hub has been fully registered (hdev->maxchild set).
+	 */
+	pm_runtime_set_active(&port_dev->dev);
+	pm_runtime_get_noresume(&port_dev->dev);
+	pm_runtime_enable(&port_dev->dev);
+	device_enable_async_suspend(&port_dev->dev);
+
+	/*
+	 * Keep hidden the ability to enable port-poweroff if the hub
+	 * does not support power switching.
+	 */
+	if (!hub_is_port_power_switchable(hub))
+		return 0;
+
+	/* Attempt to let userspace take over the policy. */
+	retval = dev_pm_qos_expose_flags(&port_dev->dev,
+			PM_QOS_FLAG_NO_POWER_OFF);
+	if (retval < 0) {
+		dev_warn(&port_dev->dev, "failed to expose pm_qos_no_poweroff\n");
+		return 0;
+	}
+
+	/* Userspace owns the policy, drop the kernel 'no_poweroff' request. */
+	retval = dev_pm_qos_remove_request(port_dev->req);
+	if (retval >= 0) {
+		kfree(port_dev->req);
+		port_dev->req = NULL;
+	}
+	return 0;
+}
+
+void usb_hub_remove_port_device(struct usb_hub *hub, int port1)
+{
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	struct usb_port *peer;
+
+	peer = port_dev->peer;
+	if (peer)
+		unlink_peers(port_dev, peer);
+	component_del(&port_dev->dev, &connector_ops);
+	device_unregister(&port_dev->dev);
+}
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
new file mode 100644
index 000000000..15e9bd180
--- /dev/null
+++ b/drivers/usb/core/quirks.c
@@ -0,0 +1,735 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB device quirk handling logic and table
+ *
+ * Copyright (c) 2007 Oliver Neukum
+ * Copyright (c) 2007 Greg Kroah-Hartman <gregkh@suse.de>
+ */
+
+#include <linux/moduleparam.h>
+#include <linux/usb.h>
+#include <linux/usb/quirks.h>
+#include <linux/usb/hcd.h>
+#include "usb.h"
+
+struct quirk_entry {
+	u16 vid;
+	u16 pid;
+	u32 flags;
+};
+
+static DEFINE_MUTEX(quirk_mutex);
+
+static struct quirk_entry *quirk_list;
+static unsigned int quirk_count;
+
+static char quirks_param[128];
+
+static int quirks_param_set(const char *value, const struct kernel_param *kp)
+{
+	char *val, *p, *field;
+	u16 vid, pid;
+	u32 flags;
+	size_t i;
+	int err;
+
+	val = kstrdup(value, GFP_KERNEL);
+	if (!val)
+		return -ENOMEM;
+
+	err = param_set_copystring(val, kp);
+	if (err) {
+		kfree(val);
+		return err;
+	}
+
+	mutex_lock(&quirk_mutex);
+
+	if (!*val) {
+		quirk_count = 0;
+		kfree(quirk_list);
+		quirk_list = NULL;
+		goto unlock;
+	}
+
+	for (quirk_count = 1, i = 0; val[i]; i++)
+		if (val[i] == ',')
+			quirk_count++;
+
+	if (quirk_list) {
+		kfree(quirk_list);
+		quirk_list = NULL;
+	}
+
+	quirk_list = kcalloc(quirk_count, sizeof(struct quirk_entry),
+			     GFP_KERNEL);
+	if (!quirk_list) {
+		quirk_count = 0;
+		mutex_unlock(&quirk_mutex);
+		kfree(val);
+		return -ENOMEM;
+	}
+
+	for (i = 0, p = val; p && *p;) {
+		/* Each entry consists of VID:PID:flags */
+		field = strsep(&p, ":");
+		if (!field)
+			break;
+
+		if (kstrtou16(field, 16, &vid))
+			break;
+
+		field = strsep(&p, ":");
+		if (!field)
+			break;
+
+		if (kstrtou16(field, 16, &pid))
+			break;
+
+		field = strsep(&p, ",");
+		if (!field || !*field)
+			break;
+
+		/* Collect the flags */
+		for (flags = 0; *field; field++) {
+			switch (*field) {
+			case 'a':
+				flags |= USB_QUIRK_STRING_FETCH_255;
+				break;
+			case 'b':
+				flags |= USB_QUIRK_RESET_RESUME;
+				break;
+			case 'c':
+				flags |= USB_QUIRK_NO_SET_INTF;
+				break;
+			case 'd':
+				flags |= USB_QUIRK_CONFIG_INTF_STRINGS;
+				break;
+			case 'e':
+				flags |= USB_QUIRK_RESET;
+				break;
+			case 'f':
+				flags |= USB_QUIRK_HONOR_BNUMINTERFACES;
+				break;
+			case 'g':
+				flags |= USB_QUIRK_DELAY_INIT;
+				break;
+			case 'h':
+				flags |= USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL;
+				break;
+			case 'i':
+				flags |= USB_QUIRK_DEVICE_QUALIFIER;
+				break;
+			case 'j':
+				flags |= USB_QUIRK_IGNORE_REMOTE_WAKEUP;
+				break;
+			case 'k':
+				flags |= USB_QUIRK_NO_LPM;
+				break;
+			case 'l':
+				flags |= USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL;
+				break;
+			case 'm':
+				flags |= USB_QUIRK_DISCONNECT_SUSPEND;
+				break;
+			case 'n':
+				flags |= USB_QUIRK_DELAY_CTRL_MSG;
+				break;
+			case 'o':
+				flags |= USB_QUIRK_HUB_SLOW_RESET;
+				break;
+			/* Ignore unrecognized flag characters */
+			}
+		}
+
+		quirk_list[i++] = (struct quirk_entry)
+			{ .vid = vid, .pid = pid, .flags = flags };
+	}
+
+	if (i < quirk_count)
+		quirk_count = i;
+
+unlock:
+	mutex_unlock(&quirk_mutex);
+	kfree(val);
+
+	return 0;
+}
+
+static const struct kernel_param_ops quirks_param_ops = {
+	.set = quirks_param_set,
+	.get = param_get_string,
+};
+
+static struct kparam_string quirks_param_string = {
+	.maxlen = sizeof(quirks_param),
+	.string = quirks_param,
+};
+
+device_param_cb(quirks, &quirks_param_ops, &quirks_param_string, 0644);
+MODULE_PARM_DESC(quirks, "Add/modify USB quirks by specifying quirks=vendorID:productID:quirks");
+
+/* Lists of quirky USB devices, split in device quirks and interface quirks.
+ * Device quirks are applied at the very beginning of the enumeration process,
+ * right after reading the device descriptor. They can thus only match on device
+ * information.
+ *
+ * Interface quirks are applied after reading all the configuration descriptors.
+ * They can match on both device and interface information.
+ *
+ * Note that the DELAY_INIT and HONOR_BNUMINTERFACES quirks do not make sense as
+ * interface quirks, as they only influence the enumeration process which is run
+ * before processing the interface quirks.
+ *
+ * Please keep the lists ordered by:
+ * 	1) Vendor ID
+ * 	2) Product ID
+ * 	3) Class ID
+ */
+static const struct usb_device_id usb_quirk_list[] = {
+	/* CBM - Flash disk */
+	{ USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* WORLDE Controller KS49 or Prodipe MIDI 49C USB controller */
+	{ USB_DEVICE(0x0218, 0x0201), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
+	/* WORLDE easy key (easykey.25) MIDI controller  */
+	{ USB_DEVICE(0x0218, 0x0401), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
+	/* HP 5300/5370C scanner */
+	{ USB_DEVICE(0x03f0, 0x0701), .driver_info =
+			USB_QUIRK_STRING_FETCH_255 },
+
+	/* HP v222w 16GB Mini USB Drive */
+	{ USB_DEVICE(0x03f0, 0x3f40), .driver_info = USB_QUIRK_DELAY_INIT },
+
+	/* Creative SB Audigy 2 NX */
+	{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* USB3503 */
+	{ USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Microsoft Wireless Laser Mouse 6000 Receiver */
+	{ USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Microsoft LifeCam-VX700 v2.0 */
+	{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Microsoft Surface Dock Ethernet (RTL8153 GigE) */
+	{ USB_DEVICE(0x045e, 0x07c6), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* Cherry Stream G230 2.0 (G85-231) and 3.0 (G85-232) */
+	{ USB_DEVICE(0x046a, 0x0023), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech HD Webcam C270 */
+	{ USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech HD Pro Webcams C920, C920-C, C922, C925e and C930e */
+	{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
+	{ USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT },
+	{ USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT },
+	{ USB_DEVICE(0x046d, 0x085b), .driver_info = USB_QUIRK_DELAY_INIT },
+	{ USB_DEVICE(0x046d, 0x085c), .driver_info = USB_QUIRK_DELAY_INIT },
+
+	/* Logitech ConferenceCam CC3000e */
+	{ USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT },
+	{ USB_DEVICE(0x046d, 0x0848), .driver_info = USB_QUIRK_DELAY_INIT },
+
+	/* Logitech PTZ Pro Camera */
+	{ USB_DEVICE(0x046d, 0x0853), .driver_info = USB_QUIRK_DELAY_INIT },
+
+	/* Logitech Screen Share */
+	{ USB_DEVICE(0x046d, 0x086c), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* Logitech Quickcam Fusion */
+	{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam Orbit MP */
+	{ USB_DEVICE(0x046d, 0x08c2), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam Pro for Notebook */
+	{ USB_DEVICE(0x046d, 0x08c3), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam Pro 5000 */
+	{ USB_DEVICE(0x046d, 0x08c5), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam OEM Dell Notebook */
+	{ USB_DEVICE(0x046d, 0x08c6), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam OEM Cisco VT Camera II */
+	{ USB_DEVICE(0x046d, 0x08c7), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Harmony 700-series */
+	{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
+
+	/* Philips PSC805 audio device */
+	{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Plantronic Audio 655 DSP */
+	{ USB_DEVICE(0x047f, 0xc008), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Plantronic Audio 648 USB */
+	{ USB_DEVICE(0x047f, 0xc013), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Artisman Watchdog Dongle */
+	{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
+	/* Microchip Joss Optical infrared touchboard device */
+	{ USB_DEVICE(0x04d8, 0x000c), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
+	/* CarrolTouch 4000U */
+	{ USB_DEVICE(0x04e7, 0x0009), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* CarrolTouch 4500U */
+	{ USB_DEVICE(0x04e7, 0x0030), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Samsung Android phone modem - ID conflict with SPH-I500 */
+	{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
+	/* Elan Touchscreen */
+	{ USB_DEVICE(0x04f3, 0x0089), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
+	{ USB_DEVICE(0x04f3, 0x009b), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
+	{ USB_DEVICE(0x04f3, 0x010c), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
+	{ USB_DEVICE(0x04f3, 0x0125), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
+	{ USB_DEVICE(0x04f3, 0x016f), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
+	{ USB_DEVICE(0x04f3, 0x0381), .driver_info =
+			USB_QUIRK_NO_LPM },
+
+	{ USB_DEVICE(0x04f3, 0x21b8), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
+	/* Roland SC-8820 */
+	{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Edirol SD-20 */
+	{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Alcor Micro Corp. Hub */
+	{ USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* appletouch */
+	{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Genesys Logic hub, internally used by KY-688 USB 3.1 Type-C Hub */
+	{ USB_DEVICE(0x05e3, 0x0612), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* ELSA MicroLink 56K */
+	{ USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */
+	{ USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* Avision AV600U */
+	{ USB_DEVICE(0x0638, 0x0a13), .driver_info =
+	  USB_QUIRK_STRING_FETCH_255 },
+
+	/* Saitek Cyborg Gold Joystick */
+	{ USB_DEVICE(0x06a3, 0x0006), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
+	/* Agfa SNAPSCAN 1212U */
+	{ USB_DEVICE(0x06bd, 0x0001), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Guillemot Webcam Hercules Dualpix Exchange (2nd ID) */
+	{ USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Guillemot Webcam Hercules Dualpix Exchange*/
+	{ USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Guillemot Hercules DJ Console audio card (BZ 208357) */
+	{ USB_DEVICE(0x06f8, 0xb000), .driver_info =
+			USB_QUIRK_ENDPOINT_IGNORE },
+
+	/* Midiman M-Audio Keystation 88es */
+	{ USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* SanDisk Ultra Fit and Ultra Flair */
+	{ USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM },
+	{ USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* Realforce 87U Keyboard */
+	{ USB_DEVICE(0x0853, 0x011b), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* M-Systems Flash Disk Pioneers */
+	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Baum Vario Ultra */
+	{ USB_DEVICE(0x0904, 0x6101), .driver_info =
+			USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL },
+	{ USB_DEVICE(0x0904, 0x6102), .driver_info =
+			USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL },
+	{ USB_DEVICE(0x0904, 0x6103), .driver_info =
+			USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL },
+
+	/* Sound Devices USBPre2 */
+	{ USB_DEVICE(0x0926, 0x0202), .driver_info =
+			USB_QUIRK_ENDPOINT_IGNORE },
+
+	/* Sound Devices MixPre-D */
+	{ USB_DEVICE(0x0926, 0x0208), .driver_info =
+			USB_QUIRK_ENDPOINT_IGNORE },
+
+	/* Keytouch QWERTY Panel keyboard */
+	{ USB_DEVICE(0x0926, 0x3333), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
+	/* Kingston DataTraveler 3.0 */
+	{ USB_DEVICE(0x0951, 0x1666), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* NVIDIA Jetson devices in Force Recovery mode */
+	{ USB_DEVICE(0x0955, 0x7018), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x0955, 0x7019), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x0955, 0x7418), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x0955, 0x7721), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x0955, 0x7c18), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x0955, 0x7e19), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x0955, 0x7f21), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
+	{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
+
+	/* ELMO L-12F document camera */
+	{ USB_DEVICE(0x09a1, 0x0028), .driver_info = USB_QUIRK_DELAY_CTRL_MSG },
+
+	/* Broadcom BCM92035DGROM BT dongle */
+	{ USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* MAYA44USB sound device */
+	{ USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* ASUS Base Station(T100) */
+	{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
+			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+
+	/* Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)*/
+	{ USB_DEVICE(0x0bda, 0x0151), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS },
+
+	/* Realtek hub in Dell WD19 (Type-C) */
+	{ USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* Generic RTL8153 based ethernet adapters */
+	{ USB_DEVICE(0x0bda, 0x8153), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* SONiX USB DEVICE Touchpad */
+	{ USB_DEVICE(0x0c45, 0x7056), .driver_info =
+			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+
+	/* Action Semiconductor flash disk */
+	{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
+			USB_QUIRK_STRING_FETCH_255 },
+
+	/* novation SoundControl XL */
+	{ USB_DEVICE(0x1235, 0x0061), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Focusrite Scarlett Solo USB */
+	{ USB_DEVICE(0x1235, 0x8211), .driver_info =
+			USB_QUIRK_DISCONNECT_SUSPEND },
+
+	/* Huawei 4G LTE module */
+	{ USB_DEVICE(0x12d1, 0x15bb), .driver_info =
+			USB_QUIRK_DISCONNECT_SUSPEND },
+	{ USB_DEVICE(0x12d1, 0x15c3), .driver_info =
+			USB_QUIRK_DISCONNECT_SUSPEND },
+
+	/* SKYMEDI USB_DRIVE */
+	{ USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Razer - Razer Blade Keyboard */
+	{ USB_DEVICE(0x1532, 0x0116), .driver_info =
+			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
+
+	/* Lenovo ThinkPad OneLink+ Dock twin hub controllers (VIA Labs VL812) */
+	{ USB_DEVICE(0x17ef, 0x1018), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x17ef, 0x1019), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Lenovo USB-C to Ethernet Adapter RTL8153-04 */
+	{ USB_DEVICE(0x17ef, 0x720c), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* Lenovo Powered USB-C Travel Hub (4X90S92381, RTL8153 GigE) */
+	{ USB_DEVICE(0x17ef, 0x721e), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* Lenovo ThinkCenter A630Z TI024Gen3 usb-audio */
+	{ USB_DEVICE(0x17ef, 0xa012), .driver_info =
+			USB_QUIRK_DISCONNECT_SUSPEND },
+
+	/* Lenovo ThinkPad USB-C Dock Gen2 Ethernet (RTL8153 GigE) */
+	{ USB_DEVICE(0x17ef, 0xa387), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* BUILDWIN Photo Frame */
+	{ USB_DEVICE(0x1908, 0x1315), .driver_info =
+			USB_QUIRK_HONOR_BNUMINTERFACES },
+
+	/* Protocol and OTG Electrical Test Device */
+	{ USB_DEVICE(0x1a0a, 0x0200), .driver_info =
+			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
+
+	/* Terminus Technology Inc. Hub */
+	{ USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET },
+
+	/* Corsair K70 RGB */
+	{ USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT |
+	  USB_QUIRK_DELAY_CTRL_MSG },
+
+	/* Corsair Strafe */
+	{ USB_DEVICE(0x1b1c, 0x1b15), .driver_info = USB_QUIRK_DELAY_INIT |
+	  USB_QUIRK_DELAY_CTRL_MSG },
+
+	/* Corsair Strafe RGB */
+	{ USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT |
+	  USB_QUIRK_DELAY_CTRL_MSG },
+
+	/* Corsair K70 LUX RGB */
+	{ USB_DEVICE(0x1b1c, 0x1b33), .driver_info = USB_QUIRK_DELAY_INIT },
+
+	/* Corsair K70 LUX */
+	{ USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT },
+
+	/* Corsair K70 RGB RAPDIFIRE */
+	{ USB_DEVICE(0x1b1c, 0x1b38), .driver_info = USB_QUIRK_DELAY_INIT |
+	  USB_QUIRK_DELAY_CTRL_MSG },
+
+	/* MIDI keyboard WORLDE MINI */
+	{ USB_DEVICE(0x1c75, 0x0204), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
+	/* Acer C120 LED Projector */
+	{ USB_DEVICE(0x1de1, 0xc102), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* Blackmagic Design Intensity Shuttle */
+	{ USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* Blackmagic Design UltraStudio SDI */
+	{ USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* Hauppauge HVR-950q */
+	{ USB_DEVICE(0x2040, 0x7200), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
+	/* Raydium Touchscreen */
+	{ USB_DEVICE(0x2386, 0x3114), .driver_info = USB_QUIRK_NO_LPM },
+
+	{ USB_DEVICE(0x2386, 0x3119), .driver_info = USB_QUIRK_NO_LPM },
+
+	{ USB_DEVICE(0x2386, 0x350e), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* DJI CineSSD */
+	{ USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* Alcor Link AK9563 SC Reader used in 2022 Lenovo ThinkPads */
+	{ USB_DEVICE(0x2ce3, 0x9563), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* DELL USB GEN2 */
+	{ USB_DEVICE(0x413c, 0xb062), .driver_info = USB_QUIRK_NO_LPM | USB_QUIRK_RESET_RESUME },
+
+	/* VCOM device */
+	{ USB_DEVICE(0x4296, 0x7570), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS },
+
+	/* INTEL VALUE SSD */
+	{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	{ }  /* terminating entry must be last */
+};
+
+static const struct usb_device_id usb_interface_quirk_list[] = {
+	/* Logitech UVC Cameras */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x046d, USB_CLASS_VIDEO, 1, 0),
+	  .driver_info = USB_QUIRK_RESET_RESUME },
+
+	{ }  /* terminating entry must be last */
+};
+
+static const struct usb_device_id usb_amd_resume_quirk_list[] = {
+	/* Lenovo Mouse with Pixart controller */
+	{ USB_DEVICE(0x17ef, 0x602e), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Pixart Mouse */
+	{ USB_DEVICE(0x093a, 0x2500), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x093a, 0x2510), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x093a, 0x2521), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x03f0, 0x2b4a), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Optical Mouse M90/M100 */
+	{ USB_DEVICE(0x046d, 0xc05a), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	{ }  /* terminating entry must be last */
+};
+
+/*
+ * Entries for endpoints that should be ignored when parsing configuration
+ * descriptors.
+ *
+ * Matched for devices with USB_QUIRK_ENDPOINT_IGNORE.
+ */
+static const struct usb_device_id usb_endpoint_ignore[] = {
+	{ USB_DEVICE_INTERFACE_NUMBER(0x06f8, 0xb000, 5), .driver_info = 0x01 },
+	{ USB_DEVICE_INTERFACE_NUMBER(0x06f8, 0xb000, 5), .driver_info = 0x81 },
+	{ USB_DEVICE_INTERFACE_NUMBER(0x0926, 0x0202, 1), .driver_info = 0x85 },
+	{ USB_DEVICE_INTERFACE_NUMBER(0x0926, 0x0208, 1), .driver_info = 0x85 },
+	{ }
+};
+
+bool usb_endpoint_is_ignored(struct usb_device *udev,
+			     struct usb_host_interface *intf,
+			     struct usb_endpoint_descriptor *epd)
+{
+	const struct usb_device_id *id;
+	unsigned int address;
+
+	for (id = usb_endpoint_ignore; id->match_flags; ++id) {
+		if (!usb_match_device(udev, id))
+			continue;
+
+		if (!usb_match_one_id_intf(udev, intf, id))
+			continue;
+
+		address = id->driver_info;
+		if (address == epd->bEndpointAddress)
+			return true;
+	}
+
+	return false;
+}
+
+static bool usb_match_any_interface(struct usb_device *udev,
+				    const struct usb_device_id *id)
+{
+	unsigned int i;
+
+	for (i = 0; i < udev->descriptor.bNumConfigurations; ++i) {
+		struct usb_host_config *cfg = &udev->config[i];
+		unsigned int j;
+
+		for (j = 0; j < cfg->desc.bNumInterfaces; ++j) {
+			struct usb_interface_cache *cache;
+			struct usb_host_interface *intf;
+
+			cache = cfg->intf_cache[j];
+			if (cache->num_altsetting == 0)
+				continue;
+
+			intf = &cache->altsetting[0];
+			if (usb_match_one_id_intf(udev, intf, id))
+				return true;
+		}
+	}
+
+	return false;
+}
+
+static int usb_amd_resume_quirk(struct usb_device *udev)
+{
+	struct usb_hcd *hcd;
+
+	hcd = bus_to_hcd(udev->bus);
+	/* The device should be attached directly to root hub */
+	if (udev->level == 1 && hcd->amd_resume_bug == 1)
+		return 1;
+
+	return 0;
+}
+
+static u32 usb_detect_static_quirks(struct usb_device *udev,
+				    const struct usb_device_id *id)
+{
+	u32 quirks = 0;
+
+	for (; id->match_flags; id++) {
+		if (!usb_match_device(udev, id))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_INFO) &&
+		    !usb_match_any_interface(udev, id))
+			continue;
+
+		quirks |= (u32)(id->driver_info);
+	}
+
+	return quirks;
+}
+
+static u32 usb_detect_dynamic_quirks(struct usb_device *udev)
+{
+	u16 vid = le16_to_cpu(udev->descriptor.idVendor);
+	u16 pid = le16_to_cpu(udev->descriptor.idProduct);
+	int i, flags = 0;
+
+	mutex_lock(&quirk_mutex);
+
+	for (i = 0; i < quirk_count; i++) {
+		if (vid == quirk_list[i].vid && pid == quirk_list[i].pid) {
+			flags = quirk_list[i].flags;
+			break;
+		}
+	}
+
+	mutex_unlock(&quirk_mutex);
+
+	return flags;
+}
+
+/*
+ * Detect any quirks the device has, and do any housekeeping for it if needed.
+ */
+void usb_detect_quirks(struct usb_device *udev)
+{
+	udev->quirks = usb_detect_static_quirks(udev, usb_quirk_list);
+
+	/*
+	 * Pixart-based mice would trigger remote wakeup issue on AMD
+	 * Yangtze chipset, so set them as RESET_RESUME flag.
+	 */
+	if (usb_amd_resume_quirk(udev))
+		udev->quirks |= usb_detect_static_quirks(udev,
+				usb_amd_resume_quirk_list);
+
+	udev->quirks ^= usb_detect_dynamic_quirks(udev);
+
+	if (udev->quirks)
+		dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
+			udev->quirks);
+
+#ifdef CONFIG_USB_DEFAULT_PERSIST
+	if (!(udev->quirks & USB_QUIRK_RESET))
+		udev->persist_enabled = 1;
+#else
+	/* Hubs are automatically enabled for USB-PERSIST */
+	if (udev->descriptor.bDeviceClass == USB_CLASS_HUB)
+		udev->persist_enabled = 1;
+#endif	/* CONFIG_USB_DEFAULT_PERSIST */
+}
+
+void usb_detect_interface_quirks(struct usb_device *udev)
+{
+	u32 quirks;
+
+	quirks = usb_detect_static_quirks(udev, usb_interface_quirk_list);
+	if (quirks == 0)
+		return;
+
+	dev_dbg(&udev->dev, "USB interface quirks for this device: %x\n",
+		quirks);
+	udev->quirks |= quirks;
+}
+
+void usb_release_quirk_list(void)
+{
+	mutex_lock(&quirk_mutex);
+	kfree(quirk_list);
+	quirk_list = NULL;
+	mutex_unlock(&quirk_mutex);
+}
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
new file mode 100644
index 000000000..ccf6cd972
--- /dev/null
+++ b/drivers/usb/core/sysfs.c
@@ -0,0 +1,1259 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * drivers/usb/core/sysfs.c
+ *
+ * (C) Copyright 2002 David Brownell
+ * (C) Copyright 2002,2004 Greg Kroah-Hartman
+ * (C) Copyright 2002,2004 IBM Corp.
+ *
+ * All of the sysfs file attributes for usb devices and interfaces.
+ *
+ * Released under the GPLv2 only.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/quirks.h>
+#include <linux/of.h>
+#include "usb.h"
+
+/* Active configuration fields */
+#define usb_actconfig_show(field, format_string)			\
+static ssize_t field##_show(struct device *dev,				\
+			    struct device_attribute *attr, char *buf)	\
+{									\
+	struct usb_device *udev;					\
+	struct usb_host_config *actconfig;				\
+	ssize_t rc;							\
+									\
+	udev = to_usb_device(dev);					\
+	rc = usb_lock_device_interruptible(udev);			\
+	if (rc < 0)							\
+		return -EINTR;						\
+	actconfig = udev->actconfig;					\
+	if (actconfig)							\
+		rc = sysfs_emit(buf, format_string,			\
+				actconfig->desc.field);			\
+	usb_unlock_device(udev);					\
+	return rc;							\
+}									\
+
+#define usb_actconfig_attr(field, format_string)		\
+	usb_actconfig_show(field, format_string)		\
+	static DEVICE_ATTR_RO(field)
+
+usb_actconfig_attr(bNumInterfaces, "%2d\n");
+usb_actconfig_attr(bmAttributes, "%2x\n");
+
+static ssize_t bMaxPower_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev;
+	struct usb_host_config *actconfig;
+	ssize_t rc;
+
+	udev = to_usb_device(dev);
+	rc = usb_lock_device_interruptible(udev);
+	if (rc < 0)
+		return -EINTR;
+	actconfig = udev->actconfig;
+	if (actconfig)
+		rc = sysfs_emit(buf, "%dmA\n", usb_get_max_power(udev, actconfig));
+	usb_unlock_device(udev);
+	return rc;
+}
+static DEVICE_ATTR_RO(bMaxPower);
+
+static ssize_t configuration_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev;
+	struct usb_host_config *actconfig;
+	ssize_t rc;
+
+	udev = to_usb_device(dev);
+	rc = usb_lock_device_interruptible(udev);
+	if (rc < 0)
+		return -EINTR;
+	actconfig = udev->actconfig;
+	if (actconfig && actconfig->string)
+		rc = sysfs_emit(buf, "%s\n", actconfig->string);
+	usb_unlock_device(udev);
+	return rc;
+}
+static DEVICE_ATTR_RO(configuration);
+
+/* configuration value is always present, and r/w */
+usb_actconfig_show(bConfigurationValue, "%u\n");
+
+static ssize_t bConfigurationValue_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	struct usb_device	*udev = to_usb_device(dev);
+	int			config, value, rc;
+
+	if (sscanf(buf, "%d", &config) != 1 || config < -1 || config > 255)
+		return -EINVAL;
+	rc = usb_lock_device_interruptible(udev);
+	if (rc < 0)
+		return -EINTR;
+	value = usb_set_configuration(udev, config);
+	usb_unlock_device(udev);
+	return (value < 0) ? value : count;
+}
+static DEVICE_ATTR_IGNORE_LOCKDEP(bConfigurationValue, S_IRUGO | S_IWUSR,
+		bConfigurationValue_show, bConfigurationValue_store);
+
+#ifdef CONFIG_OF
+static ssize_t devspec_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct device_node *of_node = dev->of_node;
+
+	return sysfs_emit(buf, "%pOF\n", of_node);
+}
+static DEVICE_ATTR_RO(devspec);
+#endif
+
+/* String fields */
+#define usb_string_attr(name)						\
+static ssize_t  name##_show(struct device *dev,				\
+		struct device_attribute *attr, char *buf)		\
+{									\
+	struct usb_device *udev;					\
+	int retval;							\
+									\
+	udev = to_usb_device(dev);					\
+	retval = usb_lock_device_interruptible(udev);			\
+	if (retval < 0)							\
+		return -EINTR;						\
+	retval = sysfs_emit(buf, "%s\n", udev->name);			\
+	usb_unlock_device(udev);					\
+	return retval;							\
+}									\
+static DEVICE_ATTR_RO(name)
+
+usb_string_attr(product);
+usb_string_attr(manufacturer);
+usb_string_attr(serial);
+
+static ssize_t speed_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct usb_device *udev;
+	char *speed;
+
+	udev = to_usb_device(dev);
+
+	switch (udev->speed) {
+	case USB_SPEED_LOW:
+		speed = "1.5";
+		break;
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_FULL:
+		speed = "12";
+		break;
+	case USB_SPEED_HIGH:
+		speed = "480";
+		break;
+	case USB_SPEED_WIRELESS:
+		speed = "480";
+		break;
+	case USB_SPEED_SUPER:
+		speed = "5000";
+		break;
+	case USB_SPEED_SUPER_PLUS:
+		if (udev->ssp_rate == USB_SSP_GEN_2x2)
+			speed = "20000";
+		else
+			speed = "10000";
+		break;
+	default:
+		speed = "unknown";
+	}
+	return sysfs_emit(buf, "%s\n", speed);
+}
+static DEVICE_ATTR_RO(speed);
+
+static ssize_t rx_lanes_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sysfs_emit(buf, "%d\n", udev->rx_lanes);
+}
+static DEVICE_ATTR_RO(rx_lanes);
+
+static ssize_t tx_lanes_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sysfs_emit(buf, "%d\n", udev->tx_lanes);
+}
+static DEVICE_ATTR_RO(tx_lanes);
+
+static ssize_t busnum_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sysfs_emit(buf, "%d\n", udev->bus->busnum);
+}
+static DEVICE_ATTR_RO(busnum);
+
+static ssize_t devnum_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sysfs_emit(buf, "%d\n", udev->devnum);
+}
+static DEVICE_ATTR_RO(devnum);
+
+static ssize_t devpath_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sysfs_emit(buf, "%s\n", udev->devpath);
+}
+static DEVICE_ATTR_RO(devpath);
+
+static ssize_t version_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct usb_device *udev;
+	u16 bcdUSB;
+
+	udev = to_usb_device(dev);
+	bcdUSB = le16_to_cpu(udev->descriptor.bcdUSB);
+	return sysfs_emit(buf, "%2x.%02x\n", bcdUSB >> 8, bcdUSB & 0xff);
+}
+static DEVICE_ATTR_RO(version);
+
+static ssize_t maxchild_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sysfs_emit(buf, "%d\n", udev->maxchild);
+}
+static DEVICE_ATTR_RO(maxchild);
+
+static ssize_t quirks_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sysfs_emit(buf, "0x%x\n", udev->quirks);
+}
+static DEVICE_ATTR_RO(quirks);
+
+static ssize_t avoid_reset_quirk_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sysfs_emit(buf, "%d\n", !!(udev->quirks & USB_QUIRK_RESET));
+}
+
+static ssize_t avoid_reset_quirk_store(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf, size_t count)
+{
+	struct usb_device	*udev = to_usb_device(dev);
+	int			val, rc;
+
+	if (sscanf(buf, "%d", &val) != 1 || val < 0 || val > 1)
+		return -EINVAL;
+	rc = usb_lock_device_interruptible(udev);
+	if (rc < 0)
+		return -EINTR;
+	if (val)
+		udev->quirks |= USB_QUIRK_RESET;
+	else
+		udev->quirks &= ~USB_QUIRK_RESET;
+	usb_unlock_device(udev);
+	return count;
+}
+static DEVICE_ATTR_RW(avoid_reset_quirk);
+
+static ssize_t urbnum_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sysfs_emit(buf, "%d\n", atomic_read(&udev->urbnum));
+}
+static DEVICE_ATTR_RO(urbnum);
+
+static ssize_t ltm_capable_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	if (usb_device_supports_ltm(to_usb_device(dev)))
+		return sysfs_emit(buf, "%s\n", "yes");
+	return sysfs_emit(buf, "%s\n", "no");
+}
+static DEVICE_ATTR_RO(ltm_capable);
+
+#ifdef	CONFIG_PM
+
+static ssize_t persist_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+
+	return sysfs_emit(buf, "%d\n", udev->persist_enabled);
+}
+
+static ssize_t persist_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	int value, rc;
+
+	/* Hubs are always enabled for USB_PERSIST */
+	if (udev->descriptor.bDeviceClass == USB_CLASS_HUB)
+		return -EPERM;
+
+	if (sscanf(buf, "%d", &value) != 1)
+		return -EINVAL;
+
+	rc = usb_lock_device_interruptible(udev);
+	if (rc < 0)
+		return -EINTR;
+	udev->persist_enabled = !!value;
+	usb_unlock_device(udev);
+	return count;
+}
+static DEVICE_ATTR_RW(persist);
+
+static int add_persist_attributes(struct device *dev)
+{
+	int rc = 0;
+
+	if (is_usb_device(dev)) {
+		struct usb_device *udev = to_usb_device(dev);
+
+		/* Hubs are automatically enabled for USB_PERSIST,
+		 * no point in creating the attribute file.
+		 */
+		if (udev->descriptor.bDeviceClass != USB_CLASS_HUB)
+			rc = sysfs_add_file_to_group(&dev->kobj,
+					&dev_attr_persist.attr,
+					power_group_name);
+	}
+	return rc;
+}
+
+static void remove_persist_attributes(struct device *dev)
+{
+	sysfs_remove_file_from_group(&dev->kobj,
+			&dev_attr_persist.attr,
+			power_group_name);
+}
+
+static ssize_t connected_duration_show(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+
+	return sysfs_emit(buf, "%u\n",
+			jiffies_to_msecs(jiffies - udev->connect_time));
+}
+static DEVICE_ATTR_RO(connected_duration);
+
+/*
+ * If the device is resumed, the last time the device was suspended has
+ * been pre-subtracted from active_duration.  We add the current time to
+ * get the duration that the device was actually active.
+ *
+ * If the device is suspended, the active_duration is up-to-date.
+ */
+static ssize_t active_duration_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	int duration;
+
+	if (udev->state != USB_STATE_SUSPENDED)
+		duration = jiffies_to_msecs(jiffies + udev->active_duration);
+	else
+		duration = jiffies_to_msecs(udev->active_duration);
+	return sysfs_emit(buf, "%u\n", duration);
+}
+static DEVICE_ATTR_RO(active_duration);
+
+static ssize_t autosuspend_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%d\n", dev->power.autosuspend_delay / 1000);
+}
+
+static ssize_t autosuspend_store(struct device *dev,
+				 struct device_attribute *attr, const char *buf,
+				 size_t count)
+{
+	int value;
+
+	if (sscanf(buf, "%d", &value) != 1 || value >= INT_MAX/1000 ||
+			value <= -INT_MAX/1000)
+		return -EINVAL;
+
+	pm_runtime_set_autosuspend_delay(dev, value * 1000);
+	return count;
+}
+static DEVICE_ATTR_RW(autosuspend);
+
+static const char on_string[] = "on";
+static const char auto_string[] = "auto";
+
+static void warn_level(void)
+{
+	static int level_warned;
+
+	if (!level_warned) {
+		level_warned = 1;
+		printk(KERN_WARNING "WARNING! power/level is deprecated; "
+				"use power/control instead\n");
+	}
+}
+
+static ssize_t level_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	const char *p = auto_string;
+
+	warn_level();
+	if (udev->state != USB_STATE_SUSPENDED && !udev->dev.power.runtime_auto)
+		p = on_string;
+	return sysfs_emit(buf, "%s\n", p);
+}
+
+static ssize_t level_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	int len = count;
+	char *cp;
+	int rc = count;
+	int rv;
+
+	warn_level();
+	cp = memchr(buf, '\n', count);
+	if (cp)
+		len = cp - buf;
+
+	rv = usb_lock_device_interruptible(udev);
+	if (rv < 0)
+		return -EINTR;
+
+	if (len == sizeof on_string - 1 &&
+			strncmp(buf, on_string, len) == 0)
+		usb_disable_autosuspend(udev);
+
+	else if (len == sizeof auto_string - 1 &&
+			strncmp(buf, auto_string, len) == 0)
+		usb_enable_autosuspend(udev);
+
+	else
+		rc = -EINVAL;
+
+	usb_unlock_device(udev);
+	return rc;
+}
+static DEVICE_ATTR_RW(level);
+
+static ssize_t usb2_hardware_lpm_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	const char *p;
+
+	if (udev->usb2_hw_lpm_allowed == 1)
+		p = "enabled";
+	else
+		p = "disabled";
+
+	return sysfs_emit(buf, "%s\n", p);
+}
+
+static ssize_t usb2_hardware_lpm_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t count)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	bool value;
+	int ret;
+
+	ret = usb_lock_device_interruptible(udev);
+	if (ret < 0)
+		return -EINTR;
+
+	ret = strtobool(buf, &value);
+
+	if (!ret) {
+		udev->usb2_hw_lpm_allowed = value;
+		if (value)
+			ret = usb_enable_usb2_hardware_lpm(udev);
+		else
+			ret = usb_disable_usb2_hardware_lpm(udev);
+	}
+
+	usb_unlock_device(udev);
+
+	if (!ret)
+		return count;
+
+	return ret;
+}
+static DEVICE_ATTR_RW(usb2_hardware_lpm);
+
+static ssize_t usb2_lpm_l1_timeout_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	return sysfs_emit(buf, "%d\n", udev->l1_params.timeout);
+}
+
+static ssize_t usb2_lpm_l1_timeout_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	u16 timeout;
+
+	if (kstrtou16(buf, 0, &timeout))
+		return -EINVAL;
+
+	udev->l1_params.timeout = timeout;
+
+	return count;
+}
+static DEVICE_ATTR_RW(usb2_lpm_l1_timeout);
+
+static ssize_t usb2_lpm_besl_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	return sysfs_emit(buf, "%d\n", udev->l1_params.besl);
+}
+
+static ssize_t usb2_lpm_besl_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t count)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	u8 besl;
+
+	if (kstrtou8(buf, 0, &besl) || besl > 15)
+		return -EINVAL;
+
+	udev->l1_params.besl = besl;
+
+	return count;
+}
+static DEVICE_ATTR_RW(usb2_lpm_besl);
+
+static ssize_t usb3_hardware_lpm_u1_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	const char *p;
+	int rc;
+
+	rc = usb_lock_device_interruptible(udev);
+	if (rc < 0)
+		return -EINTR;
+
+	if (udev->usb3_lpm_u1_enabled)
+		p = "enabled";
+	else
+		p = "disabled";
+
+	usb_unlock_device(udev);
+
+	return sysfs_emit(buf, "%s\n", p);
+}
+static DEVICE_ATTR_RO(usb3_hardware_lpm_u1);
+
+static ssize_t usb3_hardware_lpm_u2_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	const char *p;
+	int rc;
+
+	rc = usb_lock_device_interruptible(udev);
+	if (rc < 0)
+		return -EINTR;
+
+	if (udev->usb3_lpm_u2_enabled)
+		p = "enabled";
+	else
+		p = "disabled";
+
+	usb_unlock_device(udev);
+
+	return sysfs_emit(buf, "%s\n", p);
+}
+static DEVICE_ATTR_RO(usb3_hardware_lpm_u2);
+
+static struct attribute *usb2_hardware_lpm_attr[] = {
+	&dev_attr_usb2_hardware_lpm.attr,
+	&dev_attr_usb2_lpm_l1_timeout.attr,
+	&dev_attr_usb2_lpm_besl.attr,
+	NULL,
+};
+static const struct attribute_group usb2_hardware_lpm_attr_group = {
+	.name	= power_group_name,
+	.attrs	= usb2_hardware_lpm_attr,
+};
+
+static struct attribute *usb3_hardware_lpm_attr[] = {
+	&dev_attr_usb3_hardware_lpm_u1.attr,
+	&dev_attr_usb3_hardware_lpm_u2.attr,
+	NULL,
+};
+static const struct attribute_group usb3_hardware_lpm_attr_group = {
+	.name	= power_group_name,
+	.attrs	= usb3_hardware_lpm_attr,
+};
+
+static struct attribute *power_attrs[] = {
+	&dev_attr_autosuspend.attr,
+	&dev_attr_level.attr,
+	&dev_attr_connected_duration.attr,
+	&dev_attr_active_duration.attr,
+	NULL,
+};
+static const struct attribute_group power_attr_group = {
+	.name	= power_group_name,
+	.attrs	= power_attrs,
+};
+
+static int add_power_attributes(struct device *dev)
+{
+	int rc = 0;
+
+	if (is_usb_device(dev)) {
+		struct usb_device *udev = to_usb_device(dev);
+		rc = sysfs_merge_group(&dev->kobj, &power_attr_group);
+		if (udev->usb2_hw_lpm_capable == 1)
+			rc = sysfs_merge_group(&dev->kobj,
+					&usb2_hardware_lpm_attr_group);
+		if ((udev->speed == USB_SPEED_SUPER ||
+		     udev->speed == USB_SPEED_SUPER_PLUS) &&
+				udev->lpm_capable == 1)
+			rc = sysfs_merge_group(&dev->kobj,
+					&usb3_hardware_lpm_attr_group);
+	}
+
+	return rc;
+}
+
+static void remove_power_attributes(struct device *dev)
+{
+	sysfs_unmerge_group(&dev->kobj, &usb2_hardware_lpm_attr_group);
+	sysfs_unmerge_group(&dev->kobj, &power_attr_group);
+}
+
+#else
+
+#define add_persist_attributes(dev)	0
+#define remove_persist_attributes(dev)	do {} while (0)
+
+#define add_power_attributes(dev)	0
+#define remove_power_attributes(dev)	do {} while (0)
+
+#endif	/* CONFIG_PM */
+
+
+/* Descriptor fields */
+#define usb_descriptor_attr_le16(field, format_string)			\
+static ssize_t								\
+field##_show(struct device *dev, struct device_attribute *attr,	\
+		char *buf)						\
+{									\
+	struct usb_device *udev;					\
+									\
+	udev = to_usb_device(dev);					\
+	return sysfs_emit(buf, format_string,				\
+			le16_to_cpu(udev->descriptor.field));		\
+}									\
+static DEVICE_ATTR_RO(field)
+
+usb_descriptor_attr_le16(idVendor, "%04x\n");
+usb_descriptor_attr_le16(idProduct, "%04x\n");
+usb_descriptor_attr_le16(bcdDevice, "%04x\n");
+
+#define usb_descriptor_attr(field, format_string)			\
+static ssize_t								\
+field##_show(struct device *dev, struct device_attribute *attr,	\
+		char *buf)						\
+{									\
+	struct usb_device *udev;					\
+									\
+	udev = to_usb_device(dev);					\
+	return sysfs_emit(buf, format_string, udev->descriptor.field);	\
+}									\
+static DEVICE_ATTR_RO(field)
+
+usb_descriptor_attr(bDeviceClass, "%02x\n");
+usb_descriptor_attr(bDeviceSubClass, "%02x\n");
+usb_descriptor_attr(bDeviceProtocol, "%02x\n");
+usb_descriptor_attr(bNumConfigurations, "%d\n");
+usb_descriptor_attr(bMaxPacketSize0, "%d\n");
+
+
+/* show if the device is authorized (1) or not (0) */
+static ssize_t authorized_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct usb_device *usb_dev = to_usb_device(dev);
+	return sysfs_emit(buf, "%u\n", usb_dev->authorized);
+}
+
+/*
+ * Authorize a device to be used in the system
+ *
+ * Writing a 0 deauthorizes the device, writing a 1 authorizes it.
+ */
+static ssize_t authorized_store(struct device *dev,
+				struct device_attribute *attr, const char *buf,
+				size_t size)
+{
+	ssize_t result;
+	struct usb_device *usb_dev = to_usb_device(dev);
+	unsigned val;
+	result = sscanf(buf, "%u\n", &val);
+	if (result != 1)
+		result = -EINVAL;
+	else if (val == 0)
+		result = usb_deauthorize_device(usb_dev);
+	else
+		result = usb_authorize_device(usb_dev);
+	return result < 0 ? result : size;
+}
+static DEVICE_ATTR_IGNORE_LOCKDEP(authorized, S_IRUGO | S_IWUSR,
+				  authorized_show, authorized_store);
+
+/* "Safely remove a device" */
+static ssize_t remove_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	int rc = 0;
+
+	usb_lock_device(udev);
+	if (udev->state != USB_STATE_NOTATTACHED) {
+
+		/* To avoid races, first unconfigure and then remove */
+		usb_set_configuration(udev, -1);
+		rc = usb_remove_device(udev);
+	}
+	if (rc == 0)
+		rc = count;
+	usb_unlock_device(udev);
+	return rc;
+}
+static DEVICE_ATTR_IGNORE_LOCKDEP(remove, S_IWUSR, NULL, remove_store);
+
+
+static struct attribute *dev_attrs[] = {
+	/* current configuration's attributes */
+	&dev_attr_configuration.attr,
+	&dev_attr_bNumInterfaces.attr,
+	&dev_attr_bConfigurationValue.attr,
+	&dev_attr_bmAttributes.attr,
+	&dev_attr_bMaxPower.attr,
+	/* device attributes */
+	&dev_attr_urbnum.attr,
+	&dev_attr_idVendor.attr,
+	&dev_attr_idProduct.attr,
+	&dev_attr_bcdDevice.attr,
+	&dev_attr_bDeviceClass.attr,
+	&dev_attr_bDeviceSubClass.attr,
+	&dev_attr_bDeviceProtocol.attr,
+	&dev_attr_bNumConfigurations.attr,
+	&dev_attr_bMaxPacketSize0.attr,
+	&dev_attr_speed.attr,
+	&dev_attr_rx_lanes.attr,
+	&dev_attr_tx_lanes.attr,
+	&dev_attr_busnum.attr,
+	&dev_attr_devnum.attr,
+	&dev_attr_devpath.attr,
+	&dev_attr_version.attr,
+	&dev_attr_maxchild.attr,
+	&dev_attr_quirks.attr,
+	&dev_attr_avoid_reset_quirk.attr,
+	&dev_attr_authorized.attr,
+	&dev_attr_remove.attr,
+	&dev_attr_ltm_capable.attr,
+#ifdef CONFIG_OF
+	&dev_attr_devspec.attr,
+#endif
+	NULL,
+};
+static const struct attribute_group dev_attr_grp = {
+	.attrs = dev_attrs,
+};
+
+/* When modifying this list, be sure to modify dev_string_attrs_are_visible()
+ * accordingly.
+ */
+static struct attribute *dev_string_attrs[] = {
+	&dev_attr_manufacturer.attr,
+	&dev_attr_product.attr,
+	&dev_attr_serial.attr,
+	NULL
+};
+
+static umode_t dev_string_attrs_are_visible(struct kobject *kobj,
+		struct attribute *a, int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct usb_device *udev = to_usb_device(dev);
+
+	if (a == &dev_attr_manufacturer.attr) {
+		if (udev->manufacturer == NULL)
+			return 0;
+	} else if (a == &dev_attr_product.attr) {
+		if (udev->product == NULL)
+			return 0;
+	} else if (a == &dev_attr_serial.attr) {
+		if (udev->serial == NULL)
+			return 0;
+	}
+	return a->mode;
+}
+
+static const struct attribute_group dev_string_attr_grp = {
+	.attrs =	dev_string_attrs,
+	.is_visible =	dev_string_attrs_are_visible,
+};
+
+const struct attribute_group *usb_device_groups[] = {
+	&dev_attr_grp,
+	&dev_string_attr_grp,
+	NULL
+};
+
+/* Binary descriptors */
+
+static ssize_t
+read_descriptors(struct file *filp, struct kobject *kobj,
+		struct bin_attribute *attr,
+		char *buf, loff_t off, size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct usb_device *udev = to_usb_device(dev);
+	size_t nleft = count;
+	size_t srclen, n;
+	int cfgno;
+	void *src;
+
+	/* The binary attribute begins with the device descriptor.
+	 * Following that are the raw descriptor entries for all the
+	 * configurations (config plus subsidiary descriptors).
+	 */
+	for (cfgno = -1; cfgno < udev->descriptor.bNumConfigurations &&
+			nleft > 0; ++cfgno) {
+		if (cfgno < 0) {
+			src = &udev->descriptor;
+			srclen = sizeof(struct usb_device_descriptor);
+		} else {
+			src = udev->rawdescriptors[cfgno];
+			srclen = __le16_to_cpu(udev->config[cfgno].desc.
+					wTotalLength);
+		}
+		if (off < srclen) {
+			n = min(nleft, srclen - (size_t) off);
+			memcpy(buf, src + off, n);
+			nleft -= n;
+			buf += n;
+			off = 0;
+		} else {
+			off -= srclen;
+		}
+	}
+	return count - nleft;
+}
+
+static struct bin_attribute dev_bin_attr_descriptors = {
+	.attr = {.name = "descriptors", .mode = 0444},
+	.read = read_descriptors,
+	.size = 18 + 65535,	/* dev descr + max-size raw descriptor */
+};
+
+/*
+ * Show & store the current value of authorized_default
+ */
+static ssize_t authorized_default_show(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	struct usb_device *rh_usb_dev = to_usb_device(dev);
+	struct usb_bus *usb_bus = rh_usb_dev->bus;
+	struct usb_hcd *hcd;
+
+	hcd = bus_to_hcd(usb_bus);
+	return sysfs_emit(buf, "%u\n", hcd->dev_policy);
+}
+
+static ssize_t authorized_default_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t size)
+{
+	ssize_t result;
+	unsigned int val;
+	struct usb_device *rh_usb_dev = to_usb_device(dev);
+	struct usb_bus *usb_bus = rh_usb_dev->bus;
+	struct usb_hcd *hcd;
+
+	hcd = bus_to_hcd(usb_bus);
+	result = sscanf(buf, "%u\n", &val);
+	if (result == 1) {
+		hcd->dev_policy = val <= USB_DEVICE_AUTHORIZE_INTERNAL ?
+			val : USB_DEVICE_AUTHORIZE_ALL;
+		result = size;
+	} else {
+		result = -EINVAL;
+	}
+	return result;
+}
+static DEVICE_ATTR_RW(authorized_default);
+
+/*
+ * interface_authorized_default_show - show default authorization status
+ * for USB interfaces
+ *
+ * note: interface_authorized_default is the default value
+ *       for initializing the authorized attribute of interfaces
+ */
+static ssize_t interface_authorized_default_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct usb_device *usb_dev = to_usb_device(dev);
+	struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
+
+	return sysfs_emit(buf, "%u\n", !!HCD_INTF_AUTHORIZED(hcd));
+}
+
+/*
+ * interface_authorized_default_store - store default authorization status
+ * for USB interfaces
+ *
+ * note: interface_authorized_default is the default value
+ *       for initializing the authorized attribute of interfaces
+ */
+static ssize_t interface_authorized_default_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_device *usb_dev = to_usb_device(dev);
+	struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
+	int rc = count;
+	bool val;
+
+	if (strtobool(buf, &val) != 0)
+		return -EINVAL;
+
+	if (val)
+		set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
+	else
+		clear_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
+
+	return rc;
+}
+static DEVICE_ATTR_RW(interface_authorized_default);
+
+/* Group all the USB bus attributes */
+static struct attribute *usb_bus_attrs[] = {
+		&dev_attr_authorized_default.attr,
+		&dev_attr_interface_authorized_default.attr,
+		NULL,
+};
+
+static const struct attribute_group usb_bus_attr_group = {
+	.name = NULL,	/* we want them in the same directory */
+	.attrs = usb_bus_attrs,
+};
+
+
+static int add_default_authorized_attributes(struct device *dev)
+{
+	int rc = 0;
+
+	if (is_usb_device(dev))
+		rc = sysfs_create_group(&dev->kobj, &usb_bus_attr_group);
+
+	return rc;
+}
+
+static void remove_default_authorized_attributes(struct device *dev)
+{
+	if (is_usb_device(dev)) {
+		sysfs_remove_group(&dev->kobj, &usb_bus_attr_group);
+	}
+}
+
+int usb_create_sysfs_dev_files(struct usb_device *udev)
+{
+	struct device *dev = &udev->dev;
+	int retval;
+
+	retval = device_create_bin_file(dev, &dev_bin_attr_descriptors);
+	if (retval)
+		goto error;
+
+	retval = add_persist_attributes(dev);
+	if (retval)
+		goto error;
+
+	retval = add_power_attributes(dev);
+	if (retval)
+		goto error;
+
+	if (is_root_hub(udev)) {
+		retval = add_default_authorized_attributes(dev);
+		if (retval)
+			goto error;
+	}
+	return retval;
+
+error:
+	usb_remove_sysfs_dev_files(udev);
+	return retval;
+}
+
+void usb_remove_sysfs_dev_files(struct usb_device *udev)
+{
+	struct device *dev = &udev->dev;
+
+	if (is_root_hub(udev))
+		remove_default_authorized_attributes(dev);
+
+	remove_power_attributes(dev);
+	remove_persist_attributes(dev);
+	device_remove_bin_file(dev, &dev_bin_attr_descriptors);
+}
+
+/* Interface Association Descriptor fields */
+#define usb_intf_assoc_attr(field, format_string)			\
+static ssize_t								\
+iad_##field##_show(struct device *dev, struct device_attribute *attr,	\
+		char *buf)						\
+{									\
+	struct usb_interface *intf = to_usb_interface(dev);		\
+									\
+	return sysfs_emit(buf, format_string,				\
+			intf->intf_assoc->field); 			\
+}									\
+static DEVICE_ATTR_RO(iad_##field)
+
+usb_intf_assoc_attr(bFirstInterface, "%02x\n");
+usb_intf_assoc_attr(bInterfaceCount, "%02d\n");
+usb_intf_assoc_attr(bFunctionClass, "%02x\n");
+usb_intf_assoc_attr(bFunctionSubClass, "%02x\n");
+usb_intf_assoc_attr(bFunctionProtocol, "%02x\n");
+
+/* Interface fields */
+#define usb_intf_attr(field, format_string)				\
+static ssize_t								\
+field##_show(struct device *dev, struct device_attribute *attr,		\
+		char *buf)						\
+{									\
+	struct usb_interface *intf = to_usb_interface(dev);		\
+									\
+	return sysfs_emit(buf, format_string,				\
+			intf->cur_altsetting->desc.field); 		\
+}									\
+static DEVICE_ATTR_RO(field)
+
+usb_intf_attr(bInterfaceNumber, "%02x\n");
+usb_intf_attr(bAlternateSetting, "%2d\n");
+usb_intf_attr(bNumEndpoints, "%02x\n");
+usb_intf_attr(bInterfaceClass, "%02x\n");
+usb_intf_attr(bInterfaceSubClass, "%02x\n");
+usb_intf_attr(bInterfaceProtocol, "%02x\n");
+
+static ssize_t interface_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct usb_interface *intf;
+	char *string;
+
+	intf = to_usb_interface(dev);
+	string = READ_ONCE(intf->cur_altsetting->string);
+	if (!string)
+		return 0;
+	return sysfs_emit(buf, "%s\n", string);
+}
+static DEVICE_ATTR_RO(interface);
+
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct usb_interface *intf;
+	struct usb_device *udev;
+	struct usb_host_interface *alt;
+
+	intf = to_usb_interface(dev);
+	udev = interface_to_usbdev(intf);
+	alt = READ_ONCE(intf->cur_altsetting);
+
+	return sysfs_emit(buf,
+			"usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02X"
+			"ic%02Xisc%02Xip%02Xin%02X\n",
+			le16_to_cpu(udev->descriptor.idVendor),
+			le16_to_cpu(udev->descriptor.idProduct),
+			le16_to_cpu(udev->descriptor.bcdDevice),
+			udev->descriptor.bDeviceClass,
+			udev->descriptor.bDeviceSubClass,
+			udev->descriptor.bDeviceProtocol,
+			alt->desc.bInterfaceClass,
+			alt->desc.bInterfaceSubClass,
+			alt->desc.bInterfaceProtocol,
+			alt->desc.bInterfaceNumber);
+}
+static DEVICE_ATTR_RO(modalias);
+
+static ssize_t supports_autosuspend_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	int s;
+
+	s = device_lock_interruptible(dev);
+	if (s < 0)
+		return -EINTR;
+	/* Devices will be autosuspended even when an interface isn't claimed */
+	s = (!dev->driver || to_usb_driver(dev->driver)->supports_autosuspend);
+	device_unlock(dev);
+
+	return sysfs_emit(buf, "%u\n", s);
+}
+static DEVICE_ATTR_RO(supports_autosuspend);
+
+/*
+ * interface_authorized_show - show authorization status of an USB interface
+ * 1 is authorized, 0 is deauthorized
+ */
+static ssize_t interface_authorized_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+
+	return sysfs_emit(buf, "%u\n", intf->authorized);
+}
+
+/*
+ * interface_authorized_store - authorize or deauthorize an USB interface
+ */
+static ssize_t interface_authorized_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	bool val;
+
+	if (strtobool(buf, &val) != 0)
+		return -EINVAL;
+
+	if (val)
+		usb_authorize_interface(intf);
+	else
+		usb_deauthorize_interface(intf);
+
+	return count;
+}
+static struct device_attribute dev_attr_interface_authorized =
+		__ATTR(authorized, S_IRUGO | S_IWUSR,
+		interface_authorized_show, interface_authorized_store);
+
+static struct attribute *intf_attrs[] = {
+	&dev_attr_bInterfaceNumber.attr,
+	&dev_attr_bAlternateSetting.attr,
+	&dev_attr_bNumEndpoints.attr,
+	&dev_attr_bInterfaceClass.attr,
+	&dev_attr_bInterfaceSubClass.attr,
+	&dev_attr_bInterfaceProtocol.attr,
+	&dev_attr_modalias.attr,
+	&dev_attr_supports_autosuspend.attr,
+	&dev_attr_interface_authorized.attr,
+	NULL,
+};
+static const struct attribute_group intf_attr_grp = {
+	.attrs = intf_attrs,
+};
+
+static struct attribute *intf_assoc_attrs[] = {
+	&dev_attr_iad_bFirstInterface.attr,
+	&dev_attr_iad_bInterfaceCount.attr,
+	&dev_attr_iad_bFunctionClass.attr,
+	&dev_attr_iad_bFunctionSubClass.attr,
+	&dev_attr_iad_bFunctionProtocol.attr,
+	NULL,
+};
+
+static umode_t intf_assoc_attrs_are_visible(struct kobject *kobj,
+		struct attribute *a, int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct usb_interface *intf = to_usb_interface(dev);
+
+	if (intf->intf_assoc == NULL)
+		return 0;
+	return a->mode;
+}
+
+static const struct attribute_group intf_assoc_attr_grp = {
+	.attrs =	intf_assoc_attrs,
+	.is_visible =	intf_assoc_attrs_are_visible,
+};
+
+const struct attribute_group *usb_interface_groups[] = {
+	&intf_attr_grp,
+	&intf_assoc_attr_grp,
+	NULL
+};
+
+void usb_create_sysfs_intf_files(struct usb_interface *intf)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usb_host_interface *alt = intf->cur_altsetting;
+
+	if (intf->sysfs_files_created || intf->unregistering)
+		return;
+
+	if (!alt->string && !(udev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
+		alt->string = usb_cache_string(udev, alt->desc.iInterface);
+	if (alt->string && device_create_file(&intf->dev, &dev_attr_interface)) {
+		/* This is not a serious error */
+		dev_dbg(&intf->dev, "interface string descriptor file not created\n");
+	}
+	intf->sysfs_files_created = 1;
+}
+
+void usb_remove_sysfs_intf_files(struct usb_interface *intf)
+{
+	if (!intf->sysfs_files_created)
+		return;
+
+	device_remove_file(&intf->dev, &dev_attr_interface);
+	intf->sysfs_files_created = 0;
+}
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
new file mode 100644
index 000000000..9f3c54032
--- /dev/null
+++ b/drivers/usb/core/urb.c
@@ -0,0 +1,1054 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Released under the GPLv2 only.
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/log2.h>
+#include <linux/kmsan.h>
+#include <linux/usb.h>
+#include <linux/wait.h>
+#include <linux/usb/hcd.h>
+#include <linux/scatterlist.h>
+
+#define to_urb(d) container_of(d, struct urb, kref)
+
+
+static void urb_destroy(struct kref *kref)
+{
+	struct urb *urb = to_urb(kref);
+
+	if (urb->transfer_flags & URB_FREE_BUFFER)
+		kfree(urb->transfer_buffer);
+
+	kfree(urb);
+}
+
+/**
+ * usb_init_urb - initializes a urb so that it can be used by a USB driver
+ * @urb: pointer to the urb to initialize
+ *
+ * Initializes a urb so that the USB subsystem can use it properly.
+ *
+ * If a urb is created with a call to usb_alloc_urb() it is not
+ * necessary to call this function.  Only use this if you allocate the
+ * space for a struct urb on your own.  If you call this function, be
+ * careful when freeing the memory for your urb that it is no longer in
+ * use by the USB core.
+ *
+ * Only use this function if you _really_ understand what you are doing.
+ */
+void usb_init_urb(struct urb *urb)
+{
+	if (urb) {
+		memset(urb, 0, sizeof(*urb));
+		kref_init(&urb->kref);
+		INIT_LIST_HEAD(&urb->urb_list);
+		INIT_LIST_HEAD(&urb->anchor_list);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_init_urb);
+
+/**
+ * usb_alloc_urb - creates a new urb for a USB driver to use
+ * @iso_packets: number of iso packets for this urb
+ * @mem_flags: the type of memory to allocate, see kmalloc() for a list of
+ *	valid options for this.
+ *
+ * Creates an urb for the USB driver to use, initializes a few internal
+ * structures, increments the usage counter, and returns a pointer to it.
+ *
+ * If the driver want to use this urb for interrupt, control, or bulk
+ * endpoints, pass '0' as the number of iso packets.
+ *
+ * The driver must call usb_free_urb() when it is finished with the urb.
+ *
+ * Return: A pointer to the new urb, or %NULL if no memory is available.
+ */
+struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags)
+{
+	struct urb *urb;
+
+	urb = kmalloc(struct_size(urb, iso_frame_desc, iso_packets),
+		      mem_flags);
+	if (!urb)
+		return NULL;
+	usb_init_urb(urb);
+	return urb;
+}
+EXPORT_SYMBOL_GPL(usb_alloc_urb);
+
+/**
+ * usb_free_urb - frees the memory used by a urb when all users of it are finished
+ * @urb: pointer to the urb to free, may be NULL
+ *
+ * Must be called when a user of a urb is finished with it.  When the last user
+ * of the urb calls this function, the memory of the urb is freed.
+ *
+ * Note: The transfer buffer associated with the urb is not freed unless the
+ * URB_FREE_BUFFER transfer flag is set.
+ */
+void usb_free_urb(struct urb *urb)
+{
+	if (urb)
+		kref_put(&urb->kref, urb_destroy);
+}
+EXPORT_SYMBOL_GPL(usb_free_urb);
+
+/**
+ * usb_get_urb - increments the reference count of the urb
+ * @urb: pointer to the urb to modify, may be NULL
+ *
+ * This must be  called whenever a urb is transferred from a device driver to a
+ * host controller driver.  This allows proper reference counting to happen
+ * for urbs.
+ *
+ * Return: A pointer to the urb with the incremented reference counter.
+ */
+struct urb *usb_get_urb(struct urb *urb)
+{
+	if (urb)
+		kref_get(&urb->kref);
+	return urb;
+}
+EXPORT_SYMBOL_GPL(usb_get_urb);
+
+/**
+ * usb_anchor_urb - anchors an URB while it is processed
+ * @urb: pointer to the urb to anchor
+ * @anchor: pointer to the anchor
+ *
+ * This can be called to have access to URBs which are to be executed
+ * without bothering to track them
+ */
+void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&anchor->lock, flags);
+	usb_get_urb(urb);
+	list_add_tail(&urb->anchor_list, &anchor->urb_list);
+	urb->anchor = anchor;
+
+	if (unlikely(anchor->poisoned))
+		atomic_inc(&urb->reject);
+
+	spin_unlock_irqrestore(&anchor->lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_anchor_urb);
+
+static int usb_anchor_check_wakeup(struct usb_anchor *anchor)
+{
+	return atomic_read(&anchor->suspend_wakeups) == 0 &&
+		list_empty(&anchor->urb_list);
+}
+
+/* Callers must hold anchor->lock */
+static void __usb_unanchor_urb(struct urb *urb, struct usb_anchor *anchor)
+{
+	urb->anchor = NULL;
+	list_del(&urb->anchor_list);
+	usb_put_urb(urb);
+	if (usb_anchor_check_wakeup(anchor))
+		wake_up(&anchor->wait);
+}
+
+/**
+ * usb_unanchor_urb - unanchors an URB
+ * @urb: pointer to the urb to anchor
+ *
+ * Call this to stop the system keeping track of this URB
+ */
+void usb_unanchor_urb(struct urb *urb)
+{
+	unsigned long flags;
+	struct usb_anchor *anchor;
+
+	if (!urb)
+		return;
+
+	anchor = urb->anchor;
+	if (!anchor)
+		return;
+
+	spin_lock_irqsave(&anchor->lock, flags);
+	/*
+	 * At this point, we could be competing with another thread which
+	 * has the same intention. To protect the urb from being unanchored
+	 * twice, only the winner of the race gets the job.
+	 */
+	if (likely(anchor == urb->anchor))
+		__usb_unanchor_urb(urb, anchor);
+	spin_unlock_irqrestore(&anchor->lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_unanchor_urb);
+
+/*-------------------------------------------------------------------*/
+
+static const int pipetypes[4] = {
+	PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
+};
+
+/**
+ * usb_pipe_type_check - sanity check of a specific pipe for a usb device
+ * @dev: struct usb_device to be checked
+ * @pipe: pipe to check
+ *
+ * This performs a light-weight sanity check for the endpoint in the
+ * given usb device.  It returns 0 if the pipe is valid for the specific usb
+ * device, otherwise a negative error code.
+ */
+int usb_pipe_type_check(struct usb_device *dev, unsigned int pipe)
+{
+	const struct usb_host_endpoint *ep;
+
+	ep = usb_pipe_endpoint(dev, pipe);
+	if (!ep)
+		return -EINVAL;
+	if (usb_pipetype(pipe) != pipetypes[usb_endpoint_type(&ep->desc)])
+		return -EINVAL;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_pipe_type_check);
+
+/**
+ * usb_urb_ep_type_check - sanity check of endpoint in the given urb
+ * @urb: urb to be checked
+ *
+ * This performs a light-weight sanity check for the endpoint in the
+ * given urb.  It returns 0 if the urb contains a valid endpoint, otherwise
+ * a negative error code.
+ */
+int usb_urb_ep_type_check(const struct urb *urb)
+{
+	return usb_pipe_type_check(urb->dev, urb->pipe);
+}
+EXPORT_SYMBOL_GPL(usb_urb_ep_type_check);
+
+/**
+ * usb_submit_urb - issue an asynchronous transfer request for an endpoint
+ * @urb: pointer to the urb describing the request
+ * @mem_flags: the type of memory to allocate, see kmalloc() for a list
+ *	of valid options for this.
+ *
+ * This submits a transfer request, and transfers control of the URB
+ * describing that request to the USB subsystem.  Request completion will
+ * be indicated later, asynchronously, by calling the completion handler.
+ * The three types of completion are success, error, and unlink
+ * (a software-induced fault, also called "request cancellation").
+ *
+ * URBs may be submitted in interrupt context.
+ *
+ * The caller must have correctly initialized the URB before submitting
+ * it.  Functions such as usb_fill_bulk_urb() and usb_fill_control_urb() are
+ * available to ensure that most fields are correctly initialized, for
+ * the particular kind of transfer, although they will not initialize
+ * any transfer flags.
+ *
+ * If the submission is successful, the complete() callback from the URB
+ * will be called exactly once, when the USB core and Host Controller Driver
+ * (HCD) are finished with the URB.  When the completion function is called,
+ * control of the URB is returned to the device driver which issued the
+ * request.  The completion handler may then immediately free or reuse that
+ * URB.
+ *
+ * With few exceptions, USB device drivers should never access URB fields
+ * provided by usbcore or the HCD until its complete() is called.
+ * The exceptions relate to periodic transfer scheduling.  For both
+ * interrupt and isochronous urbs, as part of successful URB submission
+ * urb->interval is modified to reflect the actual transfer period used
+ * (normally some power of two units).  And for isochronous urbs,
+ * urb->start_frame is modified to reflect when the URB's transfers were
+ * scheduled to start.
+ *
+ * Not all isochronous transfer scheduling policies will work, but most
+ * host controller drivers should easily handle ISO queues going from now
+ * until 10-200 msec into the future.  Drivers should try to keep at
+ * least one or two msec of data in the queue; many controllers require
+ * that new transfers start at least 1 msec in the future when they are
+ * added.  If the driver is unable to keep up and the queue empties out,
+ * the behavior for new submissions is governed by the URB_ISO_ASAP flag.
+ * If the flag is set, or if the queue is idle, then the URB is always
+ * assigned to the first available (and not yet expired) slot in the
+ * endpoint's schedule.  If the flag is not set and the queue is active
+ * then the URB is always assigned to the next slot in the schedule
+ * following the end of the endpoint's previous URB, even if that slot is
+ * in the past.  When a packet is assigned in this way to a slot that has
+ * already expired, the packet is not transmitted and the corresponding
+ * usb_iso_packet_descriptor's status field will return -EXDEV.  If this
+ * would happen to all the packets in the URB, submission fails with a
+ * -EXDEV error code.
+ *
+ * For control endpoints, the synchronous usb_control_msg() call is
+ * often used (in non-interrupt context) instead of this call.
+ * That is often used through convenience wrappers, for the requests
+ * that are standardized in the USB 2.0 specification.  For bulk
+ * endpoints, a synchronous usb_bulk_msg() call is available.
+ *
+ * Return:
+ * 0 on successful submissions. A negative error number otherwise.
+ *
+ * Request Queuing:
+ *
+ * URBs may be submitted to endpoints before previous ones complete, to
+ * minimize the impact of interrupt latencies and system overhead on data
+ * throughput.  With that queuing policy, an endpoint's queue would never
+ * be empty.  This is required for continuous isochronous data streams,
+ * and may also be required for some kinds of interrupt transfers. Such
+ * queuing also maximizes bandwidth utilization by letting USB controllers
+ * start work on later requests before driver software has finished the
+ * completion processing for earlier (successful) requests.
+ *
+ * As of Linux 2.6, all USB endpoint transfer queues support depths greater
+ * than one.  This was previously a HCD-specific behavior, except for ISO
+ * transfers.  Non-isochronous endpoint queues are inactive during cleanup
+ * after faults (transfer errors or cancellation).
+ *
+ * Reserved Bandwidth Transfers:
+ *
+ * Periodic transfers (interrupt or isochronous) are performed repeatedly,
+ * using the interval specified in the urb.  Submitting the first urb to
+ * the endpoint reserves the bandwidth necessary to make those transfers.
+ * If the USB subsystem can't allocate sufficient bandwidth to perform
+ * the periodic request, submitting such a periodic request should fail.
+ *
+ * For devices under xHCI, the bandwidth is reserved at configuration time, or
+ * when the alt setting is selected.  If there is not enough bus bandwidth, the
+ * configuration/alt setting request will fail.  Therefore, submissions to
+ * periodic endpoints on devices under xHCI should never fail due to bandwidth
+ * constraints.
+ *
+ * Device drivers must explicitly request that repetition, by ensuring that
+ * some URB is always on the endpoint's queue (except possibly for short
+ * periods during completion callbacks).  When there is no longer an urb
+ * queued, the endpoint's bandwidth reservation is canceled.  This means
+ * drivers can use their completion handlers to ensure they keep bandwidth
+ * they need, by reinitializing and resubmitting the just-completed urb
+ * until the driver longer needs that periodic bandwidth.
+ *
+ * Memory Flags:
+ *
+ * The general rules for how to decide which mem_flags to use
+ * are the same as for kmalloc.  There are four
+ * different possible values; GFP_KERNEL, GFP_NOFS, GFP_NOIO and
+ * GFP_ATOMIC.
+ *
+ * GFP_NOFS is not ever used, as it has not been implemented yet.
+ *
+ * GFP_ATOMIC is used when
+ *   (a) you are inside a completion handler, an interrupt, bottom half,
+ *       tasklet or timer, or
+ *   (b) you are holding a spinlock or rwlock (does not apply to
+ *       semaphores), or
+ *   (c) current->state != TASK_RUNNING, this is the case only after
+ *       you've changed it.
+ *
+ * GFP_NOIO is used in the block io path and error handling of storage
+ * devices.
+ *
+ * All other situations use GFP_KERNEL.
+ *
+ * Some more specific rules for mem_flags can be inferred, such as
+ *  (1) start_xmit, timeout, and receive methods of network drivers must
+ *      use GFP_ATOMIC (they are called with a spinlock held);
+ *  (2) queuecommand methods of scsi drivers must use GFP_ATOMIC (also
+ *      called with a spinlock held);
+ *  (3) If you use a kernel thread with a network driver you must use
+ *      GFP_NOIO, unless (b) or (c) apply;
+ *  (4) after you have done a down() you can use GFP_KERNEL, unless (b) or (c)
+ *      apply or your are in a storage driver's block io path;
+ *  (5) USB probe and disconnect can use GFP_KERNEL unless (b) or (c) apply; and
+ *  (6) changing firmware on a running storage or net device uses
+ *      GFP_NOIO, unless b) or c) apply
+ *
+ */
+int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
+{
+	int				xfertype, max;
+	struct usb_device		*dev;
+	struct usb_host_endpoint	*ep;
+	int				is_out;
+	unsigned int			allowed;
+
+	if (!urb || !urb->complete)
+		return -EINVAL;
+	if (urb->hcpriv) {
+		WARN_ONCE(1, "URB %pK submitted while active\n", urb);
+		return -EBUSY;
+	}
+
+	dev = urb->dev;
+	if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED))
+		return -ENODEV;
+
+	/* For now, get the endpoint from the pipe.  Eventually drivers
+	 * will be required to set urb->ep directly and we will eliminate
+	 * urb->pipe.
+	 */
+	ep = usb_pipe_endpoint(dev, urb->pipe);
+	if (!ep)
+		return -ENOENT;
+
+	urb->ep = ep;
+	urb->status = -EINPROGRESS;
+	urb->actual_length = 0;
+
+	/* Lots of sanity checks, so HCDs can rely on clean data
+	 * and don't need to duplicate tests
+	 */
+	xfertype = usb_endpoint_type(&ep->desc);
+	if (xfertype == USB_ENDPOINT_XFER_CONTROL) {
+		struct usb_ctrlrequest *setup =
+				(struct usb_ctrlrequest *) urb->setup_packet;
+
+		if (!setup)
+			return -ENOEXEC;
+		is_out = !(setup->bRequestType & USB_DIR_IN) ||
+				!setup->wLength;
+		dev_WARN_ONCE(&dev->dev, (usb_pipeout(urb->pipe) != is_out),
+				"BOGUS control dir, pipe %x doesn't match bRequestType %x\n",
+				urb->pipe, setup->bRequestType);
+		if (le16_to_cpu(setup->wLength) != urb->transfer_buffer_length) {
+			dev_dbg(&dev->dev, "BOGUS control len %d doesn't match transfer length %d\n",
+					le16_to_cpu(setup->wLength),
+					urb->transfer_buffer_length);
+			return -EBADR;
+		}
+	} else {
+		is_out = usb_endpoint_dir_out(&ep->desc);
+	}
+
+	/* Clear the internal flags and cache the direction for later use */
+	urb->transfer_flags &= ~(URB_DIR_MASK | URB_DMA_MAP_SINGLE |
+			URB_DMA_MAP_PAGE | URB_DMA_MAP_SG | URB_MAP_LOCAL |
+			URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL |
+			URB_DMA_SG_COMBINED);
+	urb->transfer_flags |= (is_out ? URB_DIR_OUT : URB_DIR_IN);
+	kmsan_handle_urb(urb, is_out);
+
+	if (xfertype != USB_ENDPOINT_XFER_CONTROL &&
+			dev->state < USB_STATE_CONFIGURED)
+		return -ENODEV;
+
+	max = usb_endpoint_maxp(&ep->desc);
+	if (max <= 0) {
+		dev_dbg(&dev->dev,
+			"bogus endpoint ep%d%s in %s (bad maxpacket %d)\n",
+			usb_endpoint_num(&ep->desc), is_out ? "out" : "in",
+			__func__, max);
+		return -EMSGSIZE;
+	}
+
+	/* periodic transfers limit size per frame/uframe,
+	 * but drivers only control those sizes for ISO.
+	 * while we're checking, initialize return status.
+	 */
+	if (xfertype == USB_ENDPOINT_XFER_ISOC) {
+		int	n, len;
+
+		/* SuperSpeed isoc endpoints have up to 16 bursts of up to
+		 * 3 packets each
+		 */
+		if (dev->speed >= USB_SPEED_SUPER) {
+			int     burst = 1 + ep->ss_ep_comp.bMaxBurst;
+			int     mult = USB_SS_MULT(ep->ss_ep_comp.bmAttributes);
+			max *= burst;
+			max *= mult;
+		}
+
+		if (dev->speed == USB_SPEED_SUPER_PLUS &&
+		    USB_SS_SSP_ISOC_COMP(ep->ss_ep_comp.bmAttributes)) {
+			struct usb_ssp_isoc_ep_comp_descriptor *isoc_ep_comp;
+
+			isoc_ep_comp = &ep->ssp_isoc_ep_comp;
+			max = le32_to_cpu(isoc_ep_comp->dwBytesPerInterval);
+		}
+
+		/* "high bandwidth" mode, 1-3 packets/uframe? */
+		if (dev->speed == USB_SPEED_HIGH)
+			max *= usb_endpoint_maxp_mult(&ep->desc);
+
+		if (urb->number_of_packets <= 0)
+			return -EINVAL;
+		for (n = 0; n < urb->number_of_packets; n++) {
+			len = urb->iso_frame_desc[n].length;
+			if (len < 0 || len > max)
+				return -EMSGSIZE;
+			urb->iso_frame_desc[n].status = -EXDEV;
+			urb->iso_frame_desc[n].actual_length = 0;
+		}
+	} else if (urb->num_sgs && !urb->dev->bus->no_sg_constraint &&
+			dev->speed != USB_SPEED_WIRELESS) {
+		struct scatterlist *sg;
+		int i;
+
+		for_each_sg(urb->sg, sg, urb->num_sgs - 1, i)
+			if (sg->length % max)
+				return -EINVAL;
+	}
+
+	/* the I/O buffer must be mapped/unmapped, except when length=0 */
+	if (urb->transfer_buffer_length > INT_MAX)
+		return -EMSGSIZE;
+
+	/*
+	 * stuff that drivers shouldn't do, but which shouldn't
+	 * cause problems in HCDs if they get it wrong.
+	 */
+
+	/* Check that the pipe's type matches the endpoint's type */
+	if (usb_pipe_type_check(urb->dev, urb->pipe))
+		dev_WARN(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n",
+			usb_pipetype(urb->pipe), pipetypes[xfertype]);
+
+	/* Check against a simple/standard policy */
+	allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT | URB_DIR_MASK |
+			URB_FREE_BUFFER);
+	switch (xfertype) {
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_INT:
+		if (is_out)
+			allowed |= URB_ZERO_PACKET;
+		fallthrough;
+	default:			/* all non-iso endpoints */
+		if (!is_out)
+			allowed |= URB_SHORT_NOT_OK;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		allowed |= URB_ISO_ASAP;
+		break;
+	}
+	allowed &= urb->transfer_flags;
+
+	/* warn if submitter gave bogus flags */
+	if (allowed != urb->transfer_flags)
+		dev_WARN(&dev->dev, "BOGUS urb flags, %x --> %x\n",
+			urb->transfer_flags, allowed);
+
+	/*
+	 * Force periodic transfer intervals to be legal values that are
+	 * a power of two (so HCDs don't need to).
+	 *
+	 * FIXME want bus->{intr,iso}_sched_horizon values here.  Each HC
+	 * supports different values... this uses EHCI/UHCI defaults (and
+	 * EHCI can use smaller non-default values).
+	 */
+	switch (xfertype) {
+	case USB_ENDPOINT_XFER_ISOC:
+	case USB_ENDPOINT_XFER_INT:
+		/* too small? */
+		switch (dev->speed) {
+		case USB_SPEED_WIRELESS:
+			if ((urb->interval < 6)
+				&& (xfertype == USB_ENDPOINT_XFER_INT))
+				return -EINVAL;
+			fallthrough;
+		default:
+			if (urb->interval <= 0)
+				return -EINVAL;
+			break;
+		}
+		/* too big? */
+		switch (dev->speed) {
+		case USB_SPEED_SUPER_PLUS:
+		case USB_SPEED_SUPER:	/* units are 125us */
+			/* Handle up to 2^(16-1) microframes */
+			if (urb->interval > (1 << 15))
+				return -EINVAL;
+			max = 1 << 15;
+			break;
+		case USB_SPEED_WIRELESS:
+			if (urb->interval > 16)
+				return -EINVAL;
+			break;
+		case USB_SPEED_HIGH:	/* units are microframes */
+			/* NOTE usb handles 2^15 */
+			if (urb->interval > (1024 * 8))
+				urb->interval = 1024 * 8;
+			max = 1024 * 8;
+			break;
+		case USB_SPEED_FULL:	/* units are frames/msec */
+		case USB_SPEED_LOW:
+			if (xfertype == USB_ENDPOINT_XFER_INT) {
+				if (urb->interval > 255)
+					return -EINVAL;
+				/* NOTE ohci only handles up to 32 */
+				max = 128;
+			} else {
+				if (urb->interval > 1024)
+					urb->interval = 1024;
+				/* NOTE usb and ohci handle up to 2^15 */
+				max = 1024;
+			}
+			break;
+		default:
+			return -EINVAL;
+		}
+		if (dev->speed != USB_SPEED_WIRELESS) {
+			/* Round down to a power of 2, no more than max */
+			urb->interval = min(max, 1 << ilog2(urb->interval));
+		}
+	}
+
+	return usb_hcd_submit_urb(urb, mem_flags);
+}
+EXPORT_SYMBOL_GPL(usb_submit_urb);
+
+/*-------------------------------------------------------------------*/
+
+/**
+ * usb_unlink_urb - abort/cancel a transfer request for an endpoint
+ * @urb: pointer to urb describing a previously submitted request,
+ *	may be NULL
+ *
+ * This routine cancels an in-progress request.  URBs complete only once
+ * per submission, and may be canceled only once per submission.
+ * Successful cancellation means termination of @urb will be expedited
+ * and the completion handler will be called with a status code
+ * indicating that the request has been canceled (rather than any other
+ * code).
+ *
+ * Drivers should not call this routine or related routines, such as
+ * usb_kill_urb() or usb_unlink_anchored_urbs(), after their disconnect
+ * method has returned.  The disconnect function should synchronize with
+ * a driver's I/O routines to insure that all URB-related activity has
+ * completed before it returns.
+ *
+ * This request is asynchronous, however the HCD might call the ->complete()
+ * callback during unlink. Therefore when drivers call usb_unlink_urb(), they
+ * must not hold any locks that may be taken by the completion function.
+ * Success is indicated by returning -EINPROGRESS, at which time the URB will
+ * probably not yet have been given back to the device driver. When it is
+ * eventually called, the completion function will see @urb->status ==
+ * -ECONNRESET.
+ * Failure is indicated by usb_unlink_urb() returning any other value.
+ * Unlinking will fail when @urb is not currently "linked" (i.e., it was
+ * never submitted, or it was unlinked before, or the hardware is already
+ * finished with it), even if the completion handler has not yet run.
+ *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
+ * Return: -EINPROGRESS on success. See description for other values on
+ * failure.
+ *
+ * Unlinking and Endpoint Queues:
+ *
+ * [The behaviors and guarantees described below do not apply to virtual
+ * root hubs but only to endpoint queues for physical USB devices.]
+ *
+ * Host Controller Drivers (HCDs) place all the URBs for a particular
+ * endpoint in a queue.  Normally the queue advances as the controller
+ * hardware processes each request.  But when an URB terminates with an
+ * error its queue generally stops (see below), at least until that URB's
+ * completion routine returns.  It is guaranteed that a stopped queue
+ * will not restart until all its unlinked URBs have been fully retired,
+ * with their completion routines run, even if that's not until some time
+ * after the original completion handler returns.  The same behavior and
+ * guarantee apply when an URB terminates because it was unlinked.
+ *
+ * Bulk and interrupt endpoint queues are guaranteed to stop whenever an
+ * URB terminates with any sort of error, including -ECONNRESET, -ENOENT,
+ * and -EREMOTEIO.  Control endpoint queues behave the same way except
+ * that they are not guaranteed to stop for -EREMOTEIO errors.  Queues
+ * for isochronous endpoints are treated differently, because they must
+ * advance at fixed rates.  Such queues do not stop when an URB
+ * encounters an error or is unlinked.  An unlinked isochronous URB may
+ * leave a gap in the stream of packets; it is undefined whether such
+ * gaps can be filled in.
+ *
+ * Note that early termination of an URB because a short packet was
+ * received will generate a -EREMOTEIO error if and only if the
+ * URB_SHORT_NOT_OK flag is set.  By setting this flag, USB device
+ * drivers can build deep queues for large or complex bulk transfers
+ * and clean them up reliably after any sort of aborted transfer by
+ * unlinking all pending URBs at the first fault.
+ *
+ * When a control URB terminates with an error other than -EREMOTEIO, it
+ * is quite likely that the status stage of the transfer will not take
+ * place.
+ */
+int usb_unlink_urb(struct urb *urb)
+{
+	if (!urb)
+		return -EINVAL;
+	if (!urb->dev)
+		return -ENODEV;
+	if (!urb->ep)
+		return -EIDRM;
+	return usb_hcd_unlink_urb(urb, -ECONNRESET);
+}
+EXPORT_SYMBOL_GPL(usb_unlink_urb);
+
+/**
+ * usb_kill_urb - cancel a transfer request and wait for it to finish
+ * @urb: pointer to URB describing a previously submitted request,
+ *	may be NULL
+ *
+ * This routine cancels an in-progress request.  It is guaranteed that
+ * upon return all completion handlers will have finished and the URB
+ * will be totally idle and available for reuse.  These features make
+ * this an ideal way to stop I/O in a disconnect() callback or close()
+ * function.  If the request has not already finished or been unlinked
+ * the completion handler will see urb->status == -ENOENT.
+ *
+ * While the routine is running, attempts to resubmit the URB will fail
+ * with error -EPERM.  Thus even if the URB's completion handler always
+ * tries to resubmit, it will not succeed and the URB will become idle.
+ *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
+ * This routine may not be used in an interrupt context (such as a bottom
+ * half or a completion handler), or when holding a spinlock, or in other
+ * situations where the caller can't schedule().
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
+ */
+void usb_kill_urb(struct urb *urb)
+{
+	might_sleep();
+	if (!(urb && urb->dev && urb->ep))
+		return;
+	atomic_inc(&urb->reject);
+	/*
+	 * Order the write of urb->reject above before the read
+	 * of urb->use_count below.  Pairs with the barriers in
+	 * __usb_hcd_giveback_urb() and usb_hcd_submit_urb().
+	 */
+	smp_mb__after_atomic();
+
+	usb_hcd_unlink_urb(urb, -ENOENT);
+	wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0);
+
+	atomic_dec(&urb->reject);
+}
+EXPORT_SYMBOL_GPL(usb_kill_urb);
+
+/**
+ * usb_poison_urb - reliably kill a transfer and prevent further use of an URB
+ * @urb: pointer to URB describing a previously submitted request,
+ *	may be NULL
+ *
+ * This routine cancels an in-progress request.  It is guaranteed that
+ * upon return all completion handlers will have finished and the URB
+ * will be totally idle and cannot be reused.  These features make
+ * this an ideal way to stop I/O in a disconnect() callback.
+ * If the request has not already finished or been unlinked
+ * the completion handler will see urb->status == -ENOENT.
+ *
+ * After and while the routine runs, attempts to resubmit the URB will fail
+ * with error -EPERM.  Thus even if the URB's completion handler always
+ * tries to resubmit, it will not succeed and the URB will become idle.
+ *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
+ * This routine may not be used in an interrupt context (such as a bottom
+ * half or a completion handler), or when holding a spinlock, or in other
+ * situations where the caller can't schedule().
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
+ */
+void usb_poison_urb(struct urb *urb)
+{
+	might_sleep();
+	if (!urb)
+		return;
+	atomic_inc(&urb->reject);
+	/*
+	 * Order the write of urb->reject above before the read
+	 * of urb->use_count below.  Pairs with the barriers in
+	 * __usb_hcd_giveback_urb() and usb_hcd_submit_urb().
+	 */
+	smp_mb__after_atomic();
+
+	if (!urb->dev || !urb->ep)
+		return;
+
+	usb_hcd_unlink_urb(urb, -ENOENT);
+	wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0);
+}
+EXPORT_SYMBOL_GPL(usb_poison_urb);
+
+void usb_unpoison_urb(struct urb *urb)
+{
+	if (!urb)
+		return;
+
+	atomic_dec(&urb->reject);
+}
+EXPORT_SYMBOL_GPL(usb_unpoison_urb);
+
+/**
+ * usb_block_urb - reliably prevent further use of an URB
+ * @urb: pointer to URB to be blocked, may be NULL
+ *
+ * After the routine has run, attempts to resubmit the URB will fail
+ * with error -EPERM.  Thus even if the URB's completion handler always
+ * tries to resubmit, it will not succeed and the URB will become idle.
+ *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ */
+void usb_block_urb(struct urb *urb)
+{
+	if (!urb)
+		return;
+
+	atomic_inc(&urb->reject);
+}
+EXPORT_SYMBOL_GPL(usb_block_urb);
+
+/**
+ * usb_kill_anchored_urbs - kill all URBs associated with an anchor
+ * @anchor: anchor the requests are bound to
+ *
+ * This kills all outstanding URBs starting from the back of the queue,
+ * with guarantee that no completer callbacks will take place from the
+ * anchor after this function returns.
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
+ */
+void usb_kill_anchored_urbs(struct usb_anchor *anchor)
+{
+	struct urb *victim;
+	int surely_empty;
+
+	do {
+		spin_lock_irq(&anchor->lock);
+		while (!list_empty(&anchor->urb_list)) {
+			victim = list_entry(anchor->urb_list.prev,
+					    struct urb, anchor_list);
+			/* make sure the URB isn't freed before we kill it */
+			usb_get_urb(victim);
+			spin_unlock_irq(&anchor->lock);
+			/* this will unanchor the URB */
+			usb_kill_urb(victim);
+			usb_put_urb(victim);
+			spin_lock_irq(&anchor->lock);
+		}
+		surely_empty = usb_anchor_check_wakeup(anchor);
+
+		spin_unlock_irq(&anchor->lock);
+		cpu_relax();
+	} while (!surely_empty);
+}
+EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
+
+
+/**
+ * usb_poison_anchored_urbs - cease all traffic from an anchor
+ * @anchor: anchor the requests are bound to
+ *
+ * this allows all outstanding URBs to be poisoned starting
+ * from the back of the queue. Newly added URBs will also be
+ * poisoned
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
+ */
+void usb_poison_anchored_urbs(struct usb_anchor *anchor)
+{
+	struct urb *victim;
+	int surely_empty;
+
+	do {
+		spin_lock_irq(&anchor->lock);
+		anchor->poisoned = 1;
+		while (!list_empty(&anchor->urb_list)) {
+			victim = list_entry(anchor->urb_list.prev,
+					    struct urb, anchor_list);
+			/* make sure the URB isn't freed before we kill it */
+			usb_get_urb(victim);
+			spin_unlock_irq(&anchor->lock);
+			/* this will unanchor the URB */
+			usb_poison_urb(victim);
+			usb_put_urb(victim);
+			spin_lock_irq(&anchor->lock);
+		}
+		surely_empty = usb_anchor_check_wakeup(anchor);
+
+		spin_unlock_irq(&anchor->lock);
+		cpu_relax();
+	} while (!surely_empty);
+}
+EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs);
+
+/**
+ * usb_unpoison_anchored_urbs - let an anchor be used successfully again
+ * @anchor: anchor the requests are bound to
+ *
+ * Reverses the effect of usb_poison_anchored_urbs
+ * the anchor can be used normally after it returns
+ */
+void usb_unpoison_anchored_urbs(struct usb_anchor *anchor)
+{
+	unsigned long flags;
+	struct urb *lazarus;
+
+	spin_lock_irqsave(&anchor->lock, flags);
+	list_for_each_entry(lazarus, &anchor->urb_list, anchor_list) {
+		usb_unpoison_urb(lazarus);
+	}
+	anchor->poisoned = 0;
+	spin_unlock_irqrestore(&anchor->lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_unpoison_anchored_urbs);
+/**
+ * usb_unlink_anchored_urbs - asynchronously cancel transfer requests en masse
+ * @anchor: anchor the requests are bound to
+ *
+ * this allows all outstanding URBs to be unlinked starting
+ * from the back of the queue. This function is asynchronous.
+ * The unlinking is just triggered. It may happen after this
+ * function has returned.
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
+ */
+void usb_unlink_anchored_urbs(struct usb_anchor *anchor)
+{
+	struct urb *victim;
+
+	while ((victim = usb_get_from_anchor(anchor)) != NULL) {
+		usb_unlink_urb(victim);
+		usb_put_urb(victim);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs);
+
+/**
+ * usb_anchor_suspend_wakeups
+ * @anchor: the anchor you want to suspend wakeups on
+ *
+ * Call this to stop the last urb being unanchored from waking up any
+ * usb_wait_anchor_empty_timeout waiters. This is used in the hcd urb give-
+ * back path to delay waking up until after the completion handler has run.
+ */
+void usb_anchor_suspend_wakeups(struct usb_anchor *anchor)
+{
+	if (anchor)
+		atomic_inc(&anchor->suspend_wakeups);
+}
+EXPORT_SYMBOL_GPL(usb_anchor_suspend_wakeups);
+
+/**
+ * usb_anchor_resume_wakeups
+ * @anchor: the anchor you want to resume wakeups on
+ *
+ * Allow usb_wait_anchor_empty_timeout waiters to be woken up again, and
+ * wake up any current waiters if the anchor is empty.
+ */
+void usb_anchor_resume_wakeups(struct usb_anchor *anchor)
+{
+	if (!anchor)
+		return;
+
+	atomic_dec(&anchor->suspend_wakeups);
+	if (usb_anchor_check_wakeup(anchor))
+		wake_up(&anchor->wait);
+}
+EXPORT_SYMBOL_GPL(usb_anchor_resume_wakeups);
+
+/**
+ * usb_wait_anchor_empty_timeout - wait for an anchor to be unused
+ * @anchor: the anchor you want to become unused
+ * @timeout: how long you are willing to wait in milliseconds
+ *
+ * Call this is you want to be sure all an anchor's
+ * URBs have finished
+ *
+ * Return: Non-zero if the anchor became unused. Zero on timeout.
+ */
+int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor,
+				  unsigned int timeout)
+{
+	return wait_event_timeout(anchor->wait,
+				  usb_anchor_check_wakeup(anchor),
+				  msecs_to_jiffies(timeout));
+}
+EXPORT_SYMBOL_GPL(usb_wait_anchor_empty_timeout);
+
+/**
+ * usb_get_from_anchor - get an anchor's oldest urb
+ * @anchor: the anchor whose urb you want
+ *
+ * This will take the oldest urb from an anchor,
+ * unanchor and return it
+ *
+ * Return: The oldest urb from @anchor, or %NULL if @anchor has no
+ * urbs associated with it.
+ */
+struct urb *usb_get_from_anchor(struct usb_anchor *anchor)
+{
+	struct urb *victim;
+	unsigned long flags;
+
+	spin_lock_irqsave(&anchor->lock, flags);
+	if (!list_empty(&anchor->urb_list)) {
+		victim = list_entry(anchor->urb_list.next, struct urb,
+				    anchor_list);
+		usb_get_urb(victim);
+		__usb_unanchor_urb(victim, anchor);
+	} else {
+		victim = NULL;
+	}
+	spin_unlock_irqrestore(&anchor->lock, flags);
+
+	return victim;
+}
+
+EXPORT_SYMBOL_GPL(usb_get_from_anchor);
+
+/**
+ * usb_scuttle_anchored_urbs - unanchor all an anchor's urbs
+ * @anchor: the anchor whose urbs you want to unanchor
+ *
+ * use this to get rid of all an anchor's urbs
+ */
+void usb_scuttle_anchored_urbs(struct usb_anchor *anchor)
+{
+	struct urb *victim;
+	unsigned long flags;
+	int surely_empty;
+
+	do {
+		spin_lock_irqsave(&anchor->lock, flags);
+		while (!list_empty(&anchor->urb_list)) {
+			victim = list_entry(anchor->urb_list.prev,
+					    struct urb, anchor_list);
+			__usb_unanchor_urb(victim, anchor);
+		}
+		surely_empty = usb_anchor_check_wakeup(anchor);
+
+		spin_unlock_irqrestore(&anchor->lock, flags);
+		cpu_relax();
+	} while (!surely_empty);
+}
+
+EXPORT_SYMBOL_GPL(usb_scuttle_anchored_urbs);
+
+/**
+ * usb_anchor_empty - is an anchor empty
+ * @anchor: the anchor you want to query
+ *
+ * Return: 1 if the anchor has no urbs associated with it.
+ */
+int usb_anchor_empty(struct usb_anchor *anchor)
+{
+	return list_empty(&anchor->urb_list);
+}
+
+EXPORT_SYMBOL_GPL(usb_anchor_empty);
+
diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c
new file mode 100644
index 000000000..533baa850
--- /dev/null
+++ b/drivers/usb/core/usb-acpi.c
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB-ACPI glue code
+ *
+ * Copyright 2012 Red Hat <mjg@redhat.com>
+ */
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/pci.h>
+#include <linux/usb/hcd.h>
+
+#include "hub.h"
+
+/**
+ * usb_acpi_power_manageable - check whether usb port has
+ * acpi power resource.
+ * @hdev: USB device belonging to the usb hub
+ * @index: port index based zero
+ *
+ * Return true if the port has acpi power resource and false if no.
+ */
+bool usb_acpi_power_manageable(struct usb_device *hdev, int index)
+{
+	acpi_handle port_handle;
+	int port1 = index + 1;
+
+	port_handle = usb_get_hub_port_acpi_handle(hdev,
+		port1);
+	if (port_handle)
+		return acpi_bus_power_manageable(port_handle);
+	else
+		return false;
+}
+EXPORT_SYMBOL_GPL(usb_acpi_power_manageable);
+
+#define UUID_USB_CONTROLLER_DSM "ce2ee385-00e6-48cb-9f05-2edb927c4899"
+#define USB_DSM_DISABLE_U1_U2_FOR_PORT	5
+
+/**
+ * usb_acpi_port_lpm_incapable - check if lpm should be disabled for a port.
+ * @hdev: USB device belonging to the usb hub
+ * @index: zero based port index
+ *
+ * Some USB3 ports may not support USB3 link power management U1/U2 states
+ * due to different retimer setup. ACPI provides _DSM method which returns 0x01
+ * if U1 and U2 states should be disabled. Evaluate _DSM with:
+ * Arg0: UUID = ce2ee385-00e6-48cb-9f05-2edb927c4899
+ * Arg1: Revision ID = 0
+ * Arg2: Function Index = 5
+ * Arg3: (empty)
+ *
+ * Return 1 if USB3 port is LPM incapable, negative on error, otherwise 0
+ */
+
+int usb_acpi_port_lpm_incapable(struct usb_device *hdev, int index)
+{
+	union acpi_object *obj;
+	acpi_handle port_handle;
+	int port1 = index + 1;
+	guid_t guid;
+	int ret;
+
+	ret = guid_parse(UUID_USB_CONTROLLER_DSM, &guid);
+	if (ret)
+		return ret;
+
+	port_handle = usb_get_hub_port_acpi_handle(hdev, port1);
+	if (!port_handle) {
+		dev_dbg(&hdev->dev, "port-%d no acpi handle\n", port1);
+		return -ENODEV;
+	}
+
+	if (!acpi_check_dsm(port_handle, &guid, 0,
+			    BIT(USB_DSM_DISABLE_U1_U2_FOR_PORT))) {
+		dev_dbg(&hdev->dev, "port-%d no _DSM function %d\n",
+			port1, USB_DSM_DISABLE_U1_U2_FOR_PORT);
+		return -ENODEV;
+	}
+
+	obj = acpi_evaluate_dsm(port_handle, &guid, 0,
+				USB_DSM_DISABLE_U1_U2_FOR_PORT, NULL);
+
+	if (!obj)
+		return -ENODEV;
+
+	if (obj->type != ACPI_TYPE_INTEGER) {
+		dev_dbg(&hdev->dev, "evaluate port-%d _DSM failed\n", port1);
+		ACPI_FREE(obj);
+		return -EINVAL;
+	}
+
+	if (obj->integer.value == 0x01)
+		ret = 1;
+
+	ACPI_FREE(obj);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_acpi_port_lpm_incapable);
+
+/**
+ * usb_acpi_set_power_state - control usb port's power via acpi power
+ * resource
+ * @hdev: USB device belonging to the usb hub
+ * @index: port index based zero
+ * @enable: power state expected to be set
+ *
+ * Notice to use usb_acpi_power_manageable() to check whether the usb port
+ * has acpi power resource before invoking this function.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int usb_acpi_set_power_state(struct usb_device *hdev, int index, bool enable)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+	struct usb_port *port_dev;
+	acpi_handle port_handle;
+	unsigned char state;
+	int port1 = index + 1;
+	int error = -EINVAL;
+
+	if (!hub)
+		return -ENODEV;
+	port_dev = hub->ports[port1 - 1];
+
+	port_handle = (acpi_handle) usb_get_hub_port_acpi_handle(hdev, port1);
+	if (!port_handle)
+		return error;
+
+	if (enable)
+		state = ACPI_STATE_D0;
+	else
+		state = ACPI_STATE_D3_COLD;
+
+	error = acpi_bus_set_power(port_handle, state);
+	if (!error)
+		dev_dbg(&port_dev->dev, "acpi: power was set to %d\n", enable);
+	else
+		dev_dbg(&port_dev->dev, "acpi: power failed to be set\n");
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(usb_acpi_set_power_state);
+
+static enum usb_port_connect_type usb_acpi_get_connect_type(acpi_handle handle,
+		struct acpi_pld_info *pld)
+{
+	enum usb_port_connect_type connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *upc = NULL;
+	acpi_status status;
+
+	/*
+	 * According to 9.14 in ACPI Spec 6.2. _PLD indicates whether usb port
+	 * is user visible and _UPC indicates whether it is connectable. If
+	 * the port was visible and connectable, it could be freely connected
+	 * and disconnected with USB devices. If no visible and connectable,
+	 * a usb device is directly hard-wired to the port. If no visible and
+	 * no connectable, the port would be not used.
+	 */
+	status = acpi_evaluate_object(handle, "_UPC", NULL, &buffer);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	upc = buffer.pointer;
+	if (!upc || (upc->type != ACPI_TYPE_PACKAGE) || upc->package.count != 4)
+		goto out;
+
+	if (upc->package.elements[0].integer.value)
+		if (pld->user_visible)
+			connect_type = USB_PORT_CONNECT_TYPE_HOT_PLUG;
+		else
+			connect_type = USB_PORT_CONNECT_TYPE_HARD_WIRED;
+	else if (!pld->user_visible)
+		connect_type = USB_PORT_NOT_USED;
+out:
+	kfree(upc);
+	return connect_type;
+}
+
+
+/*
+ * Private to usb-acpi, all the core needs to know is that
+ * port_dev->location is non-zero when it has been set by the firmware.
+ */
+#define USB_ACPI_LOCATION_VALID (1 << 31)
+
+static struct acpi_device *
+usb_acpi_get_companion_for_port(struct usb_port *port_dev)
+{
+	struct usb_device *udev;
+	struct acpi_device *adev;
+	acpi_handle *parent_handle;
+	int port1;
+
+	/* Get the struct usb_device point of port's hub */
+	udev = to_usb_device(port_dev->dev.parent->parent);
+
+	/*
+	 * The root hub ports' parent is the root hub. The non-root-hub
+	 * ports' parent is the parent hub port which the hub is
+	 * connected to.
+	 */
+	if (!udev->parent) {
+		adev = ACPI_COMPANION(&udev->dev);
+		port1 = usb_hcd_find_raw_port_number(bus_to_hcd(udev->bus),
+						     port_dev->portnum);
+	} else {
+		parent_handle = usb_get_hub_port_acpi_handle(udev->parent,
+							     udev->portnum);
+		if (!parent_handle)
+			return NULL;
+
+		adev = acpi_fetch_acpi_dev(parent_handle);
+		port1 = port_dev->portnum;
+	}
+
+	return acpi_find_child_by_adr(adev, port1);
+}
+
+static struct acpi_device *
+usb_acpi_find_companion_for_port(struct usb_port *port_dev)
+{
+	struct acpi_device *adev;
+	struct acpi_pld_info *pld;
+	acpi_handle *handle;
+	acpi_status status;
+
+	adev = usb_acpi_get_companion_for_port(port_dev);
+	if (!adev)
+		return NULL;
+
+	handle = adev->handle;
+	status = acpi_get_physical_device_location(handle, &pld);
+	if (ACPI_SUCCESS(status) && pld) {
+		port_dev->location = USB_ACPI_LOCATION_VALID
+			| pld->group_token << 8 | pld->group_position;
+		port_dev->connect_type = usb_acpi_get_connect_type(handle, pld);
+		ACPI_FREE(pld);
+	}
+
+	return adev;
+}
+
+static struct acpi_device *
+usb_acpi_find_companion_for_device(struct usb_device *udev)
+{
+	struct acpi_device *adev;
+	struct usb_port *port_dev;
+	struct usb_hub *hub;
+
+	if (!udev->parent) {
+		/*
+		 * root hub is only child (_ADR=0) under its parent, the HC.
+		 * sysdev pointer is the HC as seen from firmware.
+		 */
+		adev = ACPI_COMPANION(udev->bus->sysdev);
+		return acpi_find_child_device(adev, 0, false);
+	}
+
+	hub = usb_hub_to_struct_hub(udev->parent);
+	if (!hub)
+		return NULL;
+
+	/*
+	 * This is an embedded USB device connected to a port and such
+	 * devices share port's ACPI companion.
+	 */
+	port_dev = hub->ports[udev->portnum - 1];
+	return usb_acpi_get_companion_for_port(port_dev);
+}
+
+static struct acpi_device *usb_acpi_find_companion(struct device *dev)
+{
+	/*
+	 * The USB hierarchy like following:
+	 *
+	 * Device (EHC1)
+	 *	Device (HUBN)
+	 *		Device (PR01)
+	 *			Device (PR11)
+	 *			Device (PR12)
+	 *				Device (FN12)
+	 *				Device (FN13)
+	 *			Device (PR13)
+	 *			...
+	 * where HUBN is root hub, and PRNN are USB ports and devices
+	 * connected to them, and FNNN are individualk functions for
+	 * connected composite USB devices. PRNN and FNNN may contain
+	 * _CRS and other methods describing sideband resources for
+	 * the connected device.
+	 *
+	 * On the kernel side both root hub and embedded USB devices are
+	 * represented as instances of usb_device structure, and ports
+	 * are represented as usb_port structures, so the whole process
+	 * is split into 2 parts: finding companions for devices and
+	 * finding companions for ports.
+	 *
+	 * Note that we do not handle individual functions of composite
+	 * devices yet, for that we would need to assign companions to
+	 * devices corresponding to USB interfaces.
+	 */
+	if (is_usb_device(dev))
+		return usb_acpi_find_companion_for_device(to_usb_device(dev));
+	else if (is_usb_port(dev))
+		return usb_acpi_find_companion_for_port(to_usb_port(dev));
+
+	return NULL;
+}
+
+static bool usb_acpi_bus_match(struct device *dev)
+{
+	return is_usb_device(dev) || is_usb_port(dev);
+}
+
+static struct acpi_bus_type usb_acpi_bus = {
+	.name = "USB",
+	.match = usb_acpi_bus_match,
+	.find_companion = usb_acpi_find_companion,
+};
+
+int usb_acpi_register(void)
+{
+	return register_acpi_bus_type(&usb_acpi_bus);
+}
+
+void usb_acpi_unregister(void)
+{
+	unregister_acpi_bus_type(&usb_acpi_bus);
+}
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
new file mode 100644
index 000000000..3500e3c94
--- /dev/null
+++ b/drivers/usb/core/usb.c
@@ -0,0 +1,1159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * drivers/usb/core/usb.c
+ *
+ * (C) Copyright Linus Torvalds 1999
+ * (C) Copyright Johannes Erdfelt 1999-2001
+ * (C) Copyright Andreas Gal 1999
+ * (C) Copyright Gregory P. Smith 1999
+ * (C) Copyright Deti Fliegl 1999 (new USB architecture)
+ * (C) Copyright Randy Dunlap 2000
+ * (C) Copyright David Brownell 2000-2004
+ * (C) Copyright Yggdrasil Computing, Inc. 2000
+ *     (usb_device_id matching changes by Adam J. Richter)
+ * (C) Copyright Greg Kroah-Hartman 2002-2003
+ *
+ * Released under the GPLv2 only.
+ *
+ * NOTE! This is not actually a driver at all, rather this is
+ * just a collection of helper routines that implement the
+ * generic USB things that the real drivers can use..
+ *
+ * Think of this as a "USB library" rather than anything else,
+ * with no callbacks.  Callbacks are evil.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/string.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/kmod.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/debugfs.h>
+#include <linux/usb/of.h>
+
+#include <asm/io.h>
+#include <linux/scatterlist.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+
+#include "hub.h"
+
+const char *usbcore_name = "usbcore";
+
+static bool nousb;	/* Disable USB when built into kernel image */
+
+module_param(nousb, bool, 0444);
+
+/*
+ * for external read access to <nousb>
+ */
+int usb_disabled(void)
+{
+	return nousb;
+}
+EXPORT_SYMBOL_GPL(usb_disabled);
+
+#ifdef	CONFIG_PM
+/* Default delay value, in seconds */
+static int usb_autosuspend_delay = CONFIG_USB_AUTOSUSPEND_DELAY;
+module_param_named(autosuspend, usb_autosuspend_delay, int, 0644);
+MODULE_PARM_DESC(autosuspend, "default autosuspend delay");
+
+#else
+#define usb_autosuspend_delay		0
+#endif
+
+static bool match_endpoint(struct usb_endpoint_descriptor *epd,
+		struct usb_endpoint_descriptor **bulk_in,
+		struct usb_endpoint_descriptor **bulk_out,
+		struct usb_endpoint_descriptor **int_in,
+		struct usb_endpoint_descriptor **int_out)
+{
+	switch (usb_endpoint_type(epd)) {
+	case USB_ENDPOINT_XFER_BULK:
+		if (usb_endpoint_dir_in(epd)) {
+			if (bulk_in && !*bulk_in) {
+				*bulk_in = epd;
+				break;
+			}
+		} else {
+			if (bulk_out && !*bulk_out) {
+				*bulk_out = epd;
+				break;
+			}
+		}
+
+		return false;
+	case USB_ENDPOINT_XFER_INT:
+		if (usb_endpoint_dir_in(epd)) {
+			if (int_in && !*int_in) {
+				*int_in = epd;
+				break;
+			}
+		} else {
+			if (int_out && !*int_out) {
+				*int_out = epd;
+				break;
+			}
+		}
+
+		return false;
+	default:
+		return false;
+	}
+
+	return (!bulk_in || *bulk_in) && (!bulk_out || *bulk_out) &&
+			(!int_in || *int_in) && (!int_out || *int_out);
+}
+
+/**
+ * usb_find_common_endpoints() -- look up common endpoint descriptors
+ * @alt:	alternate setting to search
+ * @bulk_in:	pointer to descriptor pointer, or NULL
+ * @bulk_out:	pointer to descriptor pointer, or NULL
+ * @int_in:	pointer to descriptor pointer, or NULL
+ * @int_out:	pointer to descriptor pointer, or NULL
+ *
+ * Search the alternate setting's endpoint descriptors for the first bulk-in,
+ * bulk-out, interrupt-in and interrupt-out endpoints and return them in the
+ * provided pointers (unless they are NULL).
+ *
+ * If a requested endpoint is not found, the corresponding pointer is set to
+ * NULL.
+ *
+ * Return: Zero if all requested descriptors were found, or -ENXIO otherwise.
+ */
+int usb_find_common_endpoints(struct usb_host_interface *alt,
+		struct usb_endpoint_descriptor **bulk_in,
+		struct usb_endpoint_descriptor **bulk_out,
+		struct usb_endpoint_descriptor **int_in,
+		struct usb_endpoint_descriptor **int_out)
+{
+	struct usb_endpoint_descriptor *epd;
+	int i;
+
+	if (bulk_in)
+		*bulk_in = NULL;
+	if (bulk_out)
+		*bulk_out = NULL;
+	if (int_in)
+		*int_in = NULL;
+	if (int_out)
+		*int_out = NULL;
+
+	for (i = 0; i < alt->desc.bNumEndpoints; ++i) {
+		epd = &alt->endpoint[i].desc;
+
+		if (match_endpoint(epd, bulk_in, bulk_out, int_in, int_out))
+			return 0;
+	}
+
+	return -ENXIO;
+}
+EXPORT_SYMBOL_GPL(usb_find_common_endpoints);
+
+/**
+ * usb_find_common_endpoints_reverse() -- look up common endpoint descriptors
+ * @alt:	alternate setting to search
+ * @bulk_in:	pointer to descriptor pointer, or NULL
+ * @bulk_out:	pointer to descriptor pointer, or NULL
+ * @int_in:	pointer to descriptor pointer, or NULL
+ * @int_out:	pointer to descriptor pointer, or NULL
+ *
+ * Search the alternate setting's endpoint descriptors for the last bulk-in,
+ * bulk-out, interrupt-in and interrupt-out endpoints and return them in the
+ * provided pointers (unless they are NULL).
+ *
+ * If a requested endpoint is not found, the corresponding pointer is set to
+ * NULL.
+ *
+ * Return: Zero if all requested descriptors were found, or -ENXIO otherwise.
+ */
+int usb_find_common_endpoints_reverse(struct usb_host_interface *alt,
+		struct usb_endpoint_descriptor **bulk_in,
+		struct usb_endpoint_descriptor **bulk_out,
+		struct usb_endpoint_descriptor **int_in,
+		struct usb_endpoint_descriptor **int_out)
+{
+	struct usb_endpoint_descriptor *epd;
+	int i;
+
+	if (bulk_in)
+		*bulk_in = NULL;
+	if (bulk_out)
+		*bulk_out = NULL;
+	if (int_in)
+		*int_in = NULL;
+	if (int_out)
+		*int_out = NULL;
+
+	for (i = alt->desc.bNumEndpoints - 1; i >= 0; --i) {
+		epd = &alt->endpoint[i].desc;
+
+		if (match_endpoint(epd, bulk_in, bulk_out, int_in, int_out))
+			return 0;
+	}
+
+	return -ENXIO;
+}
+EXPORT_SYMBOL_GPL(usb_find_common_endpoints_reverse);
+
+/**
+ * usb_find_endpoint() - Given an endpoint address, search for the endpoint's
+ * usb_host_endpoint structure in an interface's current altsetting.
+ * @intf: the interface whose current altsetting should be searched
+ * @ep_addr: the endpoint address (number and direction) to find
+ *
+ * Search the altsetting's list of endpoints for one with the specified address.
+ *
+ * Return: Pointer to the usb_host_endpoint if found, %NULL otherwise.
+ */
+static const struct usb_host_endpoint *usb_find_endpoint(
+		const struct usb_interface *intf, unsigned int ep_addr)
+{
+	int n;
+	const struct usb_host_endpoint *ep;
+
+	n = intf->cur_altsetting->desc.bNumEndpoints;
+	ep = intf->cur_altsetting->endpoint;
+	for (; n > 0; (--n, ++ep)) {
+		if (ep->desc.bEndpointAddress == ep_addr)
+			return ep;
+	}
+	return NULL;
+}
+
+/**
+ * usb_check_bulk_endpoints - Check whether an interface's current altsetting
+ * contains a set of bulk endpoints with the given addresses.
+ * @intf: the interface whose current altsetting should be searched
+ * @ep_addrs: 0-terminated array of the endpoint addresses (number and
+ * direction) to look for
+ *
+ * Search for endpoints with the specified addresses and check their types.
+ *
+ * Return: %true if all the endpoints are found and are bulk, %false otherwise.
+ */
+bool usb_check_bulk_endpoints(
+		const struct usb_interface *intf, const u8 *ep_addrs)
+{
+	const struct usb_host_endpoint *ep;
+
+	for (; *ep_addrs; ++ep_addrs) {
+		ep = usb_find_endpoint(intf, *ep_addrs);
+		if (!ep || !usb_endpoint_xfer_bulk(&ep->desc))
+			return false;
+	}
+	return true;
+}
+EXPORT_SYMBOL_GPL(usb_check_bulk_endpoints);
+
+/**
+ * usb_check_int_endpoints - Check whether an interface's current altsetting
+ * contains a set of interrupt endpoints with the given addresses.
+ * @intf: the interface whose current altsetting should be searched
+ * @ep_addrs: 0-terminated array of the endpoint addresses (number and
+ * direction) to look for
+ *
+ * Search for endpoints with the specified addresses and check their types.
+ *
+ * Return: %true if all the endpoints are found and are interrupt,
+ * %false otherwise.
+ */
+bool usb_check_int_endpoints(
+		const struct usb_interface *intf, const u8 *ep_addrs)
+{
+	const struct usb_host_endpoint *ep;
+
+	for (; *ep_addrs; ++ep_addrs) {
+		ep = usb_find_endpoint(intf, *ep_addrs);
+		if (!ep || !usb_endpoint_xfer_int(&ep->desc))
+			return false;
+	}
+	return true;
+}
+EXPORT_SYMBOL_GPL(usb_check_int_endpoints);
+
+/**
+ * usb_find_alt_setting() - Given a configuration, find the alternate setting
+ * for the given interface.
+ * @config: the configuration to search (not necessarily the current config).
+ * @iface_num: interface number to search in
+ * @alt_num: alternate interface setting number to search for.
+ *
+ * Search the configuration's interface cache for the given alt setting.
+ *
+ * Return: The alternate setting, if found. %NULL otherwise.
+ */
+struct usb_host_interface *usb_find_alt_setting(
+		struct usb_host_config *config,
+		unsigned int iface_num,
+		unsigned int alt_num)
+{
+	struct usb_interface_cache *intf_cache = NULL;
+	int i;
+
+	if (!config)
+		return NULL;
+	for (i = 0; i < config->desc.bNumInterfaces; i++) {
+		if (config->intf_cache[i]->altsetting[0].desc.bInterfaceNumber
+				== iface_num) {
+			intf_cache = config->intf_cache[i];
+			break;
+		}
+	}
+	if (!intf_cache)
+		return NULL;
+	for (i = 0; i < intf_cache->num_altsetting; i++)
+		if (intf_cache->altsetting[i].desc.bAlternateSetting == alt_num)
+			return &intf_cache->altsetting[i];
+
+	printk(KERN_DEBUG "Did not find alt setting %u for intf %u, "
+			"config %u\n", alt_num, iface_num,
+			config->desc.bConfigurationValue);
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(usb_find_alt_setting);
+
+/**
+ * usb_ifnum_to_if - get the interface object with a given interface number
+ * @dev: the device whose current configuration is considered
+ * @ifnum: the desired interface
+ *
+ * This walks the device descriptor for the currently active configuration
+ * to find the interface object with the particular interface number.
+ *
+ * Note that configuration descriptors are not required to assign interface
+ * numbers sequentially, so that it would be incorrect to assume that
+ * the first interface in that descriptor corresponds to interface zero.
+ * This routine helps device drivers avoid such mistakes.
+ * However, you should make sure that you do the right thing with any
+ * alternate settings available for this interfaces.
+ *
+ * Don't call this function unless you are bound to one of the interfaces
+ * on this device or you have locked the device!
+ *
+ * Return: A pointer to the interface that has @ifnum as interface number,
+ * if found. %NULL otherwise.
+ */
+struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev,
+				      unsigned ifnum)
+{
+	struct usb_host_config *config = dev->actconfig;
+	int i;
+
+	if (!config)
+		return NULL;
+	for (i = 0; i < config->desc.bNumInterfaces; i++)
+		if (config->interface[i]->altsetting[0]
+				.desc.bInterfaceNumber == ifnum)
+			return config->interface[i];
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(usb_ifnum_to_if);
+
+/**
+ * usb_altnum_to_altsetting - get the altsetting structure with a given alternate setting number.
+ * @intf: the interface containing the altsetting in question
+ * @altnum: the desired alternate setting number
+ *
+ * This searches the altsetting array of the specified interface for
+ * an entry with the correct bAlternateSetting value.
+ *
+ * Note that altsettings need not be stored sequentially by number, so
+ * it would be incorrect to assume that the first altsetting entry in
+ * the array corresponds to altsetting zero.  This routine helps device
+ * drivers avoid such mistakes.
+ *
+ * Don't call this function unless you are bound to the intf interface
+ * or you have locked the device!
+ *
+ * Return: A pointer to the entry of the altsetting array of @intf that
+ * has @altnum as the alternate setting number. %NULL if not found.
+ */
+struct usb_host_interface *usb_altnum_to_altsetting(
+					const struct usb_interface *intf,
+					unsigned int altnum)
+{
+	int i;
+
+	for (i = 0; i < intf->num_altsetting; i++) {
+		if (intf->altsetting[i].desc.bAlternateSetting == altnum)
+			return &intf->altsetting[i];
+	}
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(usb_altnum_to_altsetting);
+
+struct find_interface_arg {
+	int minor;
+	struct device_driver *drv;
+};
+
+static int __find_interface(struct device *dev, const void *data)
+{
+	const struct find_interface_arg *arg = data;
+	struct usb_interface *intf;
+
+	if (!is_usb_interface(dev))
+		return 0;
+
+	if (dev->driver != arg->drv)
+		return 0;
+	intf = to_usb_interface(dev);
+	return intf->minor == arg->minor;
+}
+
+/**
+ * usb_find_interface - find usb_interface pointer for driver and device
+ * @drv: the driver whose current configuration is considered
+ * @minor: the minor number of the desired device
+ *
+ * This walks the bus device list and returns a pointer to the interface
+ * with the matching minor and driver.  Note, this only works for devices
+ * that share the USB major number.
+ *
+ * Return: A pointer to the interface with the matching major and @minor.
+ */
+struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor)
+{
+	struct find_interface_arg argb;
+	struct device *dev;
+
+	argb.minor = minor;
+	argb.drv = &drv->drvwrap.driver;
+
+	dev = bus_find_device(&usb_bus_type, NULL, &argb, __find_interface);
+
+	/* Drop reference count from bus_find_device */
+	put_device(dev);
+
+	return dev ? to_usb_interface(dev) : NULL;
+}
+EXPORT_SYMBOL_GPL(usb_find_interface);
+
+struct each_dev_arg {
+	void *data;
+	int (*fn)(struct usb_device *, void *);
+};
+
+static int __each_dev(struct device *dev, void *data)
+{
+	struct each_dev_arg *arg = (struct each_dev_arg *)data;
+
+	/* There are struct usb_interface on the same bus, filter them out */
+	if (!is_usb_device(dev))
+		return 0;
+
+	return arg->fn(to_usb_device(dev), arg->data);
+}
+
+/**
+ * usb_for_each_dev - iterate over all USB devices in the system
+ * @data: data pointer that will be handed to the callback function
+ * @fn: callback function to be called for each USB device
+ *
+ * Iterate over all USB devices and call @fn for each, passing it @data. If it
+ * returns anything other than 0, we break the iteration prematurely and return
+ * that value.
+ */
+int usb_for_each_dev(void *data, int (*fn)(struct usb_device *, void *))
+{
+	struct each_dev_arg arg = {data, fn};
+
+	return bus_for_each_dev(&usb_bus_type, NULL, &arg, __each_dev);
+}
+EXPORT_SYMBOL_GPL(usb_for_each_dev);
+
+/**
+ * usb_release_dev - free a usb device structure when all users of it are finished.
+ * @dev: device that's been disconnected
+ *
+ * Will be called only by the device core when all users of this usb device are
+ * done.
+ */
+static void usb_release_dev(struct device *dev)
+{
+	struct usb_device *udev;
+	struct usb_hcd *hcd;
+
+	udev = to_usb_device(dev);
+	hcd = bus_to_hcd(udev->bus);
+
+	usb_destroy_configuration(udev);
+	usb_release_bos_descriptor(udev);
+	of_node_put(dev->of_node);
+	usb_put_hcd(hcd);
+	kfree(udev->product);
+	kfree(udev->manufacturer);
+	kfree(udev->serial);
+	kfree(udev);
+}
+
+static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct usb_device *usb_dev;
+
+	usb_dev = to_usb_device(dev);
+
+	if (add_uevent_var(env, "BUSNUM=%03d", usb_dev->bus->busnum))
+		return -ENOMEM;
+
+	if (add_uevent_var(env, "DEVNUM=%03d", usb_dev->devnum))
+		return -ENOMEM;
+
+	return 0;
+}
+
+#ifdef	CONFIG_PM
+
+/* USB device Power-Management thunks.
+ * There's no need to distinguish here between quiescing a USB device
+ * and powering it down; the generic_suspend() routine takes care of
+ * it by skipping the usb_port_suspend() call for a quiesce.  And for
+ * USB interfaces there's no difference at all.
+ */
+
+static int usb_dev_prepare(struct device *dev)
+{
+	return 0;		/* Implement eventually? */
+}
+
+static void usb_dev_complete(struct device *dev)
+{
+	/* Currently used only for rebinding interfaces */
+	usb_resume_complete(dev);
+}
+
+static int usb_dev_suspend(struct device *dev)
+{
+	return usb_suspend(dev, PMSG_SUSPEND);
+}
+
+static int usb_dev_resume(struct device *dev)
+{
+	return usb_resume(dev, PMSG_RESUME);
+}
+
+static int usb_dev_freeze(struct device *dev)
+{
+	return usb_suspend(dev, PMSG_FREEZE);
+}
+
+static int usb_dev_thaw(struct device *dev)
+{
+	return usb_resume(dev, PMSG_THAW);
+}
+
+static int usb_dev_poweroff(struct device *dev)
+{
+	return usb_suspend(dev, PMSG_HIBERNATE);
+}
+
+static int usb_dev_restore(struct device *dev)
+{
+	return usb_resume(dev, PMSG_RESTORE);
+}
+
+static const struct dev_pm_ops usb_device_pm_ops = {
+	.prepare =	usb_dev_prepare,
+	.complete =	usb_dev_complete,
+	.suspend =	usb_dev_suspend,
+	.resume =	usb_dev_resume,
+	.freeze =	usb_dev_freeze,
+	.thaw =		usb_dev_thaw,
+	.poweroff =	usb_dev_poweroff,
+	.restore =	usb_dev_restore,
+	.runtime_suspend =	usb_runtime_suspend,
+	.runtime_resume =	usb_runtime_resume,
+	.runtime_idle =		usb_runtime_idle,
+};
+
+#endif	/* CONFIG_PM */
+
+
+static char *usb_devnode(struct device *dev,
+			 umode_t *mode, kuid_t *uid, kgid_t *gid)
+{
+	struct usb_device *usb_dev;
+
+	usb_dev = to_usb_device(dev);
+	return kasprintf(GFP_KERNEL, "bus/usb/%03d/%03d",
+			 usb_dev->bus->busnum, usb_dev->devnum);
+}
+
+struct device_type usb_device_type = {
+	.name =		"usb_device",
+	.release =	usb_release_dev,
+	.uevent =	usb_dev_uevent,
+	.devnode = 	usb_devnode,
+#ifdef CONFIG_PM
+	.pm =		&usb_device_pm_ops,
+#endif
+};
+
+
+/* Returns 1 if @usb_bus is WUSB, 0 otherwise */
+static unsigned usb_bus_is_wusb(struct usb_bus *bus)
+{
+	struct usb_hcd *hcd = bus_to_hcd(bus);
+	return hcd->wireless;
+}
+
+static bool usb_dev_authorized(struct usb_device *dev, struct usb_hcd *hcd)
+{
+	struct usb_hub *hub;
+
+	if (!dev->parent)
+		return true; /* Root hub always ok [and always wired] */
+
+	switch (hcd->dev_policy) {
+	case USB_DEVICE_AUTHORIZE_NONE:
+	default:
+		return false;
+
+	case USB_DEVICE_AUTHORIZE_ALL:
+		return true;
+
+	case USB_DEVICE_AUTHORIZE_INTERNAL:
+		hub = usb_hub_to_struct_hub(dev->parent);
+		return hub->ports[dev->portnum - 1]->connect_type ==
+				USB_PORT_CONNECT_TYPE_HARD_WIRED;
+	}
+}
+
+/**
+ * usb_alloc_dev - usb device constructor (usbcore-internal)
+ * @parent: hub to which device is connected; null to allocate a root hub
+ * @bus: bus used to access the device
+ * @port1: one-based index of port; ignored for root hubs
+ *
+ * Context: task context, might sleep.
+ *
+ * Only hub drivers (including virtual root hub drivers for host
+ * controllers) should ever call this.
+ *
+ * This call may not be used in a non-sleeping context.
+ *
+ * Return: On success, a pointer to the allocated usb device. %NULL on
+ * failure.
+ */
+struct usb_device *usb_alloc_dev(struct usb_device *parent,
+				 struct usb_bus *bus, unsigned port1)
+{
+	struct usb_device *dev;
+	struct usb_hcd *usb_hcd = bus_to_hcd(bus);
+	unsigned root_hub = 0;
+	unsigned raw_port = port1;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return NULL;
+
+	if (!usb_get_hcd(usb_hcd)) {
+		kfree(dev);
+		return NULL;
+	}
+	/* Root hubs aren't true devices, so don't allocate HCD resources */
+	if (usb_hcd->driver->alloc_dev && parent &&
+		!usb_hcd->driver->alloc_dev(usb_hcd, dev)) {
+		usb_put_hcd(bus_to_hcd(bus));
+		kfree(dev);
+		return NULL;
+	}
+
+	device_initialize(&dev->dev);
+	dev->dev.bus = &usb_bus_type;
+	dev->dev.type = &usb_device_type;
+	dev->dev.groups = usb_device_groups;
+	set_dev_node(&dev->dev, dev_to_node(bus->sysdev));
+	dev->state = USB_STATE_ATTACHED;
+	dev->lpm_disable_count = 1;
+	atomic_set(&dev->urbnum, 0);
+
+	INIT_LIST_HEAD(&dev->ep0.urb_list);
+	dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
+	dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
+	/* ep0 maxpacket comes later, from device descriptor */
+	usb_enable_endpoint(dev, &dev->ep0, false);
+	dev->can_submit = 1;
+
+	/* Save readable and stable topology id, distinguishing devices
+	 * by location for diagnostics, tools, driver model, etc.  The
+	 * string is a path along hub ports, from the root.  Each device's
+	 * dev->devpath will be stable until USB is re-cabled, and hubs
+	 * are often labeled with these port numbers.  The name isn't
+	 * as stable:  bus->busnum changes easily from modprobe order,
+	 * cardbus or pci hotplugging, and so on.
+	 */
+	if (unlikely(!parent)) {
+		dev->devpath[0] = '0';
+		dev->route = 0;
+
+		dev->dev.parent = bus->controller;
+		device_set_of_node_from_dev(&dev->dev, bus->sysdev);
+		dev_set_name(&dev->dev, "usb%d", bus->busnum);
+		root_hub = 1;
+	} else {
+		/* match any labeling on the hubs; it's one-based */
+		if (parent->devpath[0] == '0') {
+			snprintf(dev->devpath, sizeof dev->devpath,
+				"%d", port1);
+			/* Root ports are not counted in route string */
+			dev->route = 0;
+		} else {
+			snprintf(dev->devpath, sizeof dev->devpath,
+				"%s.%d", parent->devpath, port1);
+			/* Route string assumes hubs have less than 16 ports */
+			if (port1 < 15)
+				dev->route = parent->route +
+					(port1 << ((parent->level - 1)*4));
+			else
+				dev->route = parent->route +
+					(15 << ((parent->level - 1)*4));
+		}
+
+		dev->dev.parent = &parent->dev;
+		dev_set_name(&dev->dev, "%d-%s", bus->busnum, dev->devpath);
+
+		if (!parent->parent) {
+			/* device under root hub's port */
+			raw_port = usb_hcd_find_raw_port_number(usb_hcd,
+				port1);
+		}
+		dev->dev.of_node = usb_of_get_device_node(parent, raw_port);
+
+		/* hub driver sets up TT records */
+	}
+
+	dev->portnum = port1;
+	dev->bus = bus;
+	dev->parent = parent;
+	INIT_LIST_HEAD(&dev->filelist);
+
+#ifdef	CONFIG_PM
+	pm_runtime_set_autosuspend_delay(&dev->dev,
+			usb_autosuspend_delay * 1000);
+	dev->connect_time = jiffies;
+	dev->active_duration = -jiffies;
+#endif
+
+	dev->authorized = usb_dev_authorized(dev, usb_hcd);
+	if (!root_hub)
+		dev->wusb = usb_bus_is_wusb(bus) ? 1 : 0;
+
+	return dev;
+}
+EXPORT_SYMBOL_GPL(usb_alloc_dev);
+
+/**
+ * usb_get_dev - increments the reference count of the usb device structure
+ * @dev: the device being referenced
+ *
+ * Each live reference to a device should be refcounted.
+ *
+ * Drivers for USB interfaces should normally record such references in
+ * their probe() methods, when they bind to an interface, and release
+ * them by calling usb_put_dev(), in their disconnect() methods.
+ * However, if a driver does not access the usb_device structure after
+ * its disconnect() method returns then refcounting is not necessary,
+ * because the USB core guarantees that a usb_device will not be
+ * deallocated until after all of its interface drivers have been unbound.
+ *
+ * Return: A pointer to the device with the incremented reference counter.
+ */
+struct usb_device *usb_get_dev(struct usb_device *dev)
+{
+	if (dev)
+		get_device(&dev->dev);
+	return dev;
+}
+EXPORT_SYMBOL_GPL(usb_get_dev);
+
+/**
+ * usb_put_dev - release a use of the usb device structure
+ * @dev: device that's been disconnected
+ *
+ * Must be called when a user of a device is finished with it.  When the last
+ * user of the device calls this function, the memory of the device is freed.
+ */
+void usb_put_dev(struct usb_device *dev)
+{
+	if (dev)
+		put_device(&dev->dev);
+}
+EXPORT_SYMBOL_GPL(usb_put_dev);
+
+/**
+ * usb_get_intf - increments the reference count of the usb interface structure
+ * @intf: the interface being referenced
+ *
+ * Each live reference to a interface must be refcounted.
+ *
+ * Drivers for USB interfaces should normally record such references in
+ * their probe() methods, when they bind to an interface, and release
+ * them by calling usb_put_intf(), in their disconnect() methods.
+ * However, if a driver does not access the usb_interface structure after
+ * its disconnect() method returns then refcounting is not necessary,
+ * because the USB core guarantees that a usb_interface will not be
+ * deallocated until after its driver has been unbound.
+ *
+ * Return: A pointer to the interface with the incremented reference counter.
+ */
+struct usb_interface *usb_get_intf(struct usb_interface *intf)
+{
+	if (intf)
+		get_device(&intf->dev);
+	return intf;
+}
+EXPORT_SYMBOL_GPL(usb_get_intf);
+
+/**
+ * usb_put_intf - release a use of the usb interface structure
+ * @intf: interface that's been decremented
+ *
+ * Must be called when a user of an interface is finished with it.  When the
+ * last user of the interface calls this function, the memory of the interface
+ * is freed.
+ */
+void usb_put_intf(struct usb_interface *intf)
+{
+	if (intf)
+		put_device(&intf->dev);
+}
+EXPORT_SYMBOL_GPL(usb_put_intf);
+
+/**
+ * usb_intf_get_dma_device - acquire a reference on the usb interface's DMA endpoint
+ * @intf: the usb interface
+ *
+ * While a USB device cannot perform DMA operations by itself, many USB
+ * controllers can. A call to usb_intf_get_dma_device() returns the DMA endpoint
+ * for the given USB interface, if any. The returned device structure must be
+ * released with put_device().
+ *
+ * See also usb_get_dma_device().
+ *
+ * Returns: A reference to the usb interface's DMA endpoint; or NULL if none
+ *          exists.
+ */
+struct device *usb_intf_get_dma_device(struct usb_interface *intf)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct device *dmadev;
+
+	if (!udev->bus)
+		return NULL;
+
+	dmadev = get_device(udev->bus->sysdev);
+	if (!dmadev || !dmadev->dma_mask) {
+		put_device(dmadev);
+		return NULL;
+	}
+
+	return dmadev;
+}
+EXPORT_SYMBOL_GPL(usb_intf_get_dma_device);
+
+/*			USB device locking
+ *
+ * USB devices and interfaces are locked using the semaphore in their
+ * embedded struct device.  The hub driver guarantees that whenever a
+ * device is connected or disconnected, drivers are called with the
+ * USB device locked as well as their particular interface.
+ *
+ * Complications arise when several devices are to be locked at the same
+ * time.  Only hub-aware drivers that are part of usbcore ever have to
+ * do this; nobody else needs to worry about it.  The rule for locking
+ * is simple:
+ *
+ *	When locking both a device and its parent, always lock the
+ *	parent first.
+ */
+
+/**
+ * usb_lock_device_for_reset - cautiously acquire the lock for a usb device structure
+ * @udev: device that's being locked
+ * @iface: interface bound to the driver making the request (optional)
+ *
+ * Attempts to acquire the device lock, but fails if the device is
+ * NOTATTACHED or SUSPENDED, or if iface is specified and the interface
+ * is neither BINDING nor BOUND.  Rather than sleeping to wait for the
+ * lock, the routine polls repeatedly.  This is to prevent deadlock with
+ * disconnect; in some drivers (such as usb-storage) the disconnect()
+ * or suspend() method will block waiting for a device reset to complete.
+ *
+ * Return: A negative error code for failure, otherwise 0.
+ */
+int usb_lock_device_for_reset(struct usb_device *udev,
+			      const struct usb_interface *iface)
+{
+	unsigned long jiffies_expire = jiffies + HZ;
+
+	if (udev->state == USB_STATE_NOTATTACHED)
+		return -ENODEV;
+	if (udev->state == USB_STATE_SUSPENDED)
+		return -EHOSTUNREACH;
+	if (iface && (iface->condition == USB_INTERFACE_UNBINDING ||
+			iface->condition == USB_INTERFACE_UNBOUND))
+		return -EINTR;
+
+	while (!usb_trylock_device(udev)) {
+
+		/* If we can't acquire the lock after waiting one second,
+		 * we're probably deadlocked */
+		if (time_after(jiffies, jiffies_expire))
+			return -EBUSY;
+
+		msleep(15);
+		if (udev->state == USB_STATE_NOTATTACHED)
+			return -ENODEV;
+		if (udev->state == USB_STATE_SUSPENDED)
+			return -EHOSTUNREACH;
+		if (iface && (iface->condition == USB_INTERFACE_UNBINDING ||
+				iface->condition == USB_INTERFACE_UNBOUND))
+			return -EINTR;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_lock_device_for_reset);
+
+/**
+ * usb_get_current_frame_number - return current bus frame number
+ * @dev: the device whose bus is being queried
+ *
+ * Return: The current frame number for the USB host controller used
+ * with the given USB device. This can be used when scheduling
+ * isochronous requests.
+ *
+ * Note: Different kinds of host controller have different "scheduling
+ * horizons". While one type might support scheduling only 32 frames
+ * into the future, others could support scheduling up to 1024 frames
+ * into the future.
+ *
+ */
+int usb_get_current_frame_number(struct usb_device *dev)
+{
+	return usb_hcd_get_frame_number(dev);
+}
+EXPORT_SYMBOL_GPL(usb_get_current_frame_number);
+
+/*-------------------------------------------------------------------*/
+/*
+ * __usb_get_extra_descriptor() finds a descriptor of specific type in the
+ * extra field of the interface and endpoint descriptor structs.
+ */
+
+int __usb_get_extra_descriptor(char *buffer, unsigned size,
+			       unsigned char type, void **ptr, size_t minsize)
+{
+	struct usb_descriptor_header *header;
+
+	while (size >= sizeof(struct usb_descriptor_header)) {
+		header = (struct usb_descriptor_header *)buffer;
+
+		if (header->bLength < 2 || header->bLength > size) {
+			printk(KERN_ERR
+				"%s: bogus descriptor, type %d length %d\n",
+				usbcore_name,
+				header->bDescriptorType,
+				header->bLength);
+			return -1;
+		}
+
+		if (header->bDescriptorType == type && header->bLength >= minsize) {
+			*ptr = header;
+			return 0;
+		}
+
+		buffer += header->bLength;
+		size -= header->bLength;
+	}
+	return -1;
+}
+EXPORT_SYMBOL_GPL(__usb_get_extra_descriptor);
+
+/**
+ * usb_alloc_coherent - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP
+ * @dev: device the buffer will be used with
+ * @size: requested buffer size
+ * @mem_flags: affect whether allocation may block
+ * @dma: used to return DMA address of buffer
+ *
+ * Return: Either null (indicating no buffer could be allocated), or the
+ * cpu-space pointer to a buffer that may be used to perform DMA to the
+ * specified device.  Such cpu-space buffers are returned along with the DMA
+ * address (through the pointer provided).
+ *
+ * Note:
+ * These buffers are used with URB_NO_xxx_DMA_MAP set in urb->transfer_flags
+ * to avoid behaviors like using "DMA bounce buffers", or thrashing IOMMU
+ * hardware during URB completion/resubmit.  The implementation varies between
+ * platforms, depending on details of how DMA will work to this device.
+ * Using these buffers also eliminates cacheline sharing problems on
+ * architectures where CPU caches are not DMA-coherent.  On systems without
+ * bus-snooping caches, these buffers are uncached.
+ *
+ * When the buffer is no longer used, free it with usb_free_coherent().
+ */
+void *usb_alloc_coherent(struct usb_device *dev, size_t size, gfp_t mem_flags,
+			 dma_addr_t *dma)
+{
+	if (!dev || !dev->bus)
+		return NULL;
+	return hcd_buffer_alloc(dev->bus, size, mem_flags, dma);
+}
+EXPORT_SYMBOL_GPL(usb_alloc_coherent);
+
+/**
+ * usb_free_coherent - free memory allocated with usb_alloc_coherent()
+ * @dev: device the buffer was used with
+ * @size: requested buffer size
+ * @addr: CPU address of buffer
+ * @dma: DMA address of buffer
+ *
+ * This reclaims an I/O buffer, letting it be reused.  The memory must have
+ * been allocated using usb_alloc_coherent(), and the parameters must match
+ * those provided in that allocation request.
+ */
+void usb_free_coherent(struct usb_device *dev, size_t size, void *addr,
+		       dma_addr_t dma)
+{
+	if (!dev || !dev->bus)
+		return;
+	if (!addr)
+		return;
+	hcd_buffer_free(dev->bus, size, addr, dma);
+}
+EXPORT_SYMBOL_GPL(usb_free_coherent);
+
+/*
+ * Notifications of device and interface registration
+ */
+static int usb_bus_notify(struct notifier_block *nb, unsigned long action,
+		void *data)
+{
+	struct device *dev = data;
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (dev->type == &usb_device_type)
+			(void) usb_create_sysfs_dev_files(to_usb_device(dev));
+		else if (dev->type == &usb_if_device_type)
+			usb_create_sysfs_intf_files(to_usb_interface(dev));
+		break;
+
+	case BUS_NOTIFY_DEL_DEVICE:
+		if (dev->type == &usb_device_type)
+			usb_remove_sysfs_dev_files(to_usb_device(dev));
+		else if (dev->type == &usb_if_device_type)
+			usb_remove_sysfs_intf_files(to_usb_interface(dev));
+		break;
+	}
+	return 0;
+}
+
+static struct notifier_block usb_bus_nb = {
+	.notifier_call = usb_bus_notify,
+};
+
+static void usb_debugfs_init(void)
+{
+	debugfs_create_file("devices", 0444, usb_debug_root, NULL,
+			    &usbfs_devices_fops);
+}
+
+static void usb_debugfs_cleanup(void)
+{
+	debugfs_lookup_and_remove("devices", usb_debug_root);
+}
+
+/*
+ * Init
+ */
+static int __init usb_init(void)
+{
+	int retval;
+	if (usb_disabled()) {
+		pr_info("%s: USB support disabled\n", usbcore_name);
+		return 0;
+	}
+	usb_init_pool_max();
+
+	usb_debugfs_init();
+
+	usb_acpi_register();
+	retval = bus_register(&usb_bus_type);
+	if (retval)
+		goto bus_register_failed;
+	retval = bus_register_notifier(&usb_bus_type, &usb_bus_nb);
+	if (retval)
+		goto bus_notifier_failed;
+	retval = usb_major_init();
+	if (retval)
+		goto major_init_failed;
+	retval = usb_register(&usbfs_driver);
+	if (retval)
+		goto driver_register_failed;
+	retval = usb_devio_init();
+	if (retval)
+		goto usb_devio_init_failed;
+	retval = usb_hub_init();
+	if (retval)
+		goto hub_init_failed;
+	retval = usb_register_device_driver(&usb_generic_driver, THIS_MODULE);
+	if (!retval)
+		goto out;
+
+	usb_hub_cleanup();
+hub_init_failed:
+	usb_devio_cleanup();
+usb_devio_init_failed:
+	usb_deregister(&usbfs_driver);
+driver_register_failed:
+	usb_major_cleanup();
+major_init_failed:
+	bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
+bus_notifier_failed:
+	bus_unregister(&usb_bus_type);
+bus_register_failed:
+	usb_acpi_unregister();
+	usb_debugfs_cleanup();
+out:
+	return retval;
+}
+
+/*
+ * Cleanup
+ */
+static void __exit usb_exit(void)
+{
+	/* This will matter if shutdown/reboot does exitcalls. */
+	if (usb_disabled())
+		return;
+
+	usb_release_quirk_list();
+	usb_deregister_device_driver(&usb_generic_driver);
+	usb_major_cleanup();
+	usb_deregister(&usbfs_driver);
+	usb_devio_cleanup();
+	usb_hub_cleanup();
+	bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
+	bus_unregister(&usb_bus_type);
+	usb_acpi_unregister();
+	usb_debugfs_cleanup();
+	idr_destroy(&usb_bus_idr);
+}
+
+subsys_initcall(usb_init);
+module_exit(usb_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
new file mode 100644
index 000000000..3bb2e1db4
--- /dev/null
+++ b/drivers/usb/core/usb.h
@@ -0,0 +1,222 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Released under the GPLv2 only.
+ */
+
+#include <linux/pm.h>
+#include <linux/acpi.h>
+
+struct usb_hub_descriptor;
+struct usb_dev_state;
+
+/* Functions local to drivers/usb/core/ */
+
+extern int usb_create_sysfs_dev_files(struct usb_device *dev);
+extern void usb_remove_sysfs_dev_files(struct usb_device *dev);
+extern void usb_create_sysfs_intf_files(struct usb_interface *intf);
+extern void usb_remove_sysfs_intf_files(struct usb_interface *intf);
+extern int usb_create_ep_devs(struct device *parent,
+				struct usb_host_endpoint *endpoint,
+				struct usb_device *udev);
+extern void usb_remove_ep_devs(struct usb_host_endpoint *endpoint);
+
+extern void usb_enable_endpoint(struct usb_device *dev,
+		struct usb_host_endpoint *ep, bool reset_toggle);
+extern void usb_enable_interface(struct usb_device *dev,
+		struct usb_interface *intf, bool reset_toggles);
+extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+		bool reset_hardware);
+extern void usb_disable_interface(struct usb_device *dev,
+		struct usb_interface *intf, bool reset_hardware);
+extern void usb_release_interface_cache(struct kref *ref);
+extern void usb_disable_device(struct usb_device *dev, int skip_ep0);
+extern int usb_deauthorize_device(struct usb_device *);
+extern int usb_authorize_device(struct usb_device *);
+extern void usb_deauthorize_interface(struct usb_interface *);
+extern void usb_authorize_interface(struct usb_interface *);
+extern void usb_detect_quirks(struct usb_device *udev);
+extern void usb_detect_interface_quirks(struct usb_device *udev);
+extern void usb_release_quirk_list(void);
+extern bool usb_endpoint_is_ignored(struct usb_device *udev,
+		struct usb_host_interface *intf,
+		struct usb_endpoint_descriptor *epd);
+extern int usb_remove_device(struct usb_device *udev);
+
+extern struct usb_device_descriptor *usb_get_device_descriptor(
+		struct usb_device *udev);
+extern int usb_set_isoch_delay(struct usb_device *dev);
+extern int usb_get_bos_descriptor(struct usb_device *dev);
+extern void usb_release_bos_descriptor(struct usb_device *dev);
+extern char *usb_cache_string(struct usb_device *udev, int index);
+extern int usb_set_configuration(struct usb_device *dev, int configuration);
+extern int usb_choose_configuration(struct usb_device *udev);
+extern int usb_generic_driver_probe(struct usb_device *udev);
+extern void usb_generic_driver_disconnect(struct usb_device *udev);
+extern int usb_generic_driver_suspend(struct usb_device *udev,
+		pm_message_t msg);
+extern int usb_generic_driver_resume(struct usb_device *udev,
+		pm_message_t msg);
+
+static inline unsigned usb_get_max_power(struct usb_device *udev,
+		struct usb_host_config *c)
+{
+	/* SuperSpeed power is in 8 mA units; others are in 2 mA units */
+	unsigned mul = (udev->speed >= USB_SPEED_SUPER ? 8 : 2);
+
+	return c->desc.bMaxPower * mul;
+}
+
+extern void usb_kick_hub_wq(struct usb_device *dev);
+extern int usb_match_one_id_intf(struct usb_device *dev,
+				 struct usb_host_interface *intf,
+				 const struct usb_device_id *id);
+extern int usb_match_device(struct usb_device *dev,
+			    const struct usb_device_id *id);
+extern const struct usb_device_id *usb_device_match_id(struct usb_device *udev,
+				const struct usb_device_id *id);
+extern bool usb_driver_applicable(struct usb_device *udev,
+				  struct usb_device_driver *udrv);
+extern void usb_forced_unbind_intf(struct usb_interface *intf);
+extern void usb_unbind_and_rebind_marked_interfaces(struct usb_device *udev);
+
+extern void usb_hub_release_all_ports(struct usb_device *hdev,
+		struct usb_dev_state *owner);
+extern bool usb_device_is_owned(struct usb_device *udev);
+
+extern int  usb_hub_init(void);
+extern void usb_hub_cleanup(void);
+extern int usb_major_init(void);
+extern void usb_major_cleanup(void);
+extern int usb_device_supports_lpm(struct usb_device *udev);
+extern int usb_port_disable(struct usb_device *udev);
+
+#ifdef	CONFIG_PM
+
+extern int usb_suspend(struct device *dev, pm_message_t msg);
+extern int usb_resume(struct device *dev, pm_message_t msg);
+extern int usb_resume_complete(struct device *dev);
+
+extern int usb_port_suspend(struct usb_device *dev, pm_message_t msg);
+extern int usb_port_resume(struct usb_device *dev, pm_message_t msg);
+
+extern void usb_autosuspend_device(struct usb_device *udev);
+extern int usb_autoresume_device(struct usb_device *udev);
+extern int usb_remote_wakeup(struct usb_device *dev);
+extern int usb_runtime_suspend(struct device *dev);
+extern int usb_runtime_resume(struct device *dev);
+extern int usb_runtime_idle(struct device *dev);
+extern int usb_enable_usb2_hardware_lpm(struct usb_device *udev);
+extern int usb_disable_usb2_hardware_lpm(struct usb_device *udev);
+
+extern void usbfs_notify_suspend(struct usb_device *udev);
+extern void usbfs_notify_resume(struct usb_device *udev);
+
+#else
+
+static inline int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
+{
+	return 0;
+}
+
+static inline int usb_port_resume(struct usb_device *udev, pm_message_t msg)
+{
+	return 0;
+}
+
+#define usb_autosuspend_device(udev)		do {} while (0)
+static inline int usb_autoresume_device(struct usb_device *udev)
+{
+	return 0;
+}
+
+static inline int usb_enable_usb2_hardware_lpm(struct usb_device *udev)
+{
+	return 0;
+}
+
+static inline int usb_disable_usb2_hardware_lpm(struct usb_device *udev)
+{
+	return 0;
+}
+
+#endif
+
+extern struct bus_type usb_bus_type;
+extern struct mutex usb_port_peer_mutex;
+extern struct device_type usb_device_type;
+extern struct device_type usb_if_device_type;
+extern struct device_type usb_ep_device_type;
+extern struct device_type usb_port_device_type;
+extern struct usb_device_driver usb_generic_driver;
+
+static inline int is_usb_device(const struct device *dev)
+{
+	return dev->type == &usb_device_type;
+}
+
+static inline int is_usb_interface(const struct device *dev)
+{
+	return dev->type == &usb_if_device_type;
+}
+
+static inline int is_usb_endpoint(const struct device *dev)
+{
+	return dev->type == &usb_ep_device_type;
+}
+
+static inline int is_usb_port(const struct device *dev)
+{
+	return dev->type == &usb_port_device_type;
+}
+
+static inline int is_root_hub(struct usb_device *udev)
+{
+	return (udev->parent == NULL);
+}
+
+/* Do the same for device drivers and interface drivers. */
+
+static inline int is_usb_device_driver(struct device_driver *drv)
+{
+	return container_of(drv, struct usbdrv_wrap, driver)->
+			for_devices;
+}
+
+/* for labeling diagnostics */
+extern const char *usbcore_name;
+
+/* sysfs stuff */
+extern const struct attribute_group *usb_device_groups[];
+extern const struct attribute_group *usb_interface_groups[];
+
+/* usbfs stuff */
+extern struct usb_driver usbfs_driver;
+extern const struct file_operations usbfs_devices_fops;
+extern const struct file_operations usbdev_file_operations;
+
+extern int usb_devio_init(void);
+extern void usb_devio_cleanup(void);
+
+/*
+ * Firmware specific cookie identifying a port's location. '0' == no location
+ * data available
+ */
+typedef u32 usb_port_location_t;
+
+/* internal notify stuff */
+extern void usb_notify_add_device(struct usb_device *udev);
+extern void usb_notify_remove_device(struct usb_device *udev);
+extern void usb_notify_add_bus(struct usb_bus *ubus);
+extern void usb_notify_remove_bus(struct usb_bus *ubus);
+extern void usb_hub_adjust_deviceremovable(struct usb_device *hdev,
+		struct usb_hub_descriptor *desc);
+
+#ifdef CONFIG_ACPI
+extern int usb_acpi_register(void);
+extern void usb_acpi_unregister(void);
+extern acpi_handle usb_get_hub_port_acpi_handle(struct usb_device *hdev,
+	int port1);
+#else
+static inline int usb_acpi_register(void) { return 0; };
+static inline void usb_acpi_unregister(void) { };
+#endif
diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig
new file mode 100644
index 000000000..c13171936
--- /dev/null
+++ b/drivers/usb/dwc2/Kconfig
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config USB_DWC2
+	tristate "DesignWare USB2 DRD Core Support"
+	depends on HAS_DMA
+	depends on USB || USB_GADGET
+	depends on HAS_IOMEM
+	select USB_ROLE_SWITCH
+	help
+	  Say Y here if your system has a Dual Role Hi-Speed USB
+	  controller based on the DesignWare HSOTG IP Core.
+
+	  For host mode, if you choose to build the driver as dynamically
+	  linked modules, the core module will be called dwc2.ko, the PCI
+	  bus interface module (if you have a PCI bus system) will be
+	  called dwc2_pci.ko, and the platform interface module (for
+	  controllers directly connected to the CPU) will be called
+	  dwc2_platform.ko. For all modes(host, gadget and dual-role), there
+	  will be an additional module named dwc2.ko.
+
+if USB_DWC2
+
+choice
+	bool "DWC2 Mode Selection"
+	default USB_DWC2_DUAL_ROLE if (USB && USB_GADGET)
+	default USB_DWC2_HOST if (USB && !USB_GADGET)
+	default USB_DWC2_PERIPHERAL if (!USB && USB_GADGET)
+
+config USB_DWC2_HOST
+	bool "Host only mode"
+	depends on USB=y || (USB_DWC2=m && USB)
+	help
+	  The Designware USB2.0 high-speed host controller
+	  integrated into many SoCs. Select this option if you want the
+	  driver to operate in Host-only mode.
+
+comment "Gadget/Dual-role mode requires USB Gadget support to be enabled"
+
+config USB_DWC2_PERIPHERAL
+	bool "Gadget only mode"
+	depends on USB_GADGET=y || USB_GADGET=USB_DWC2
+	help
+	  The Designware USB2.0 high-speed gadget controller
+	  integrated into many SoCs. Select this option if you want the
+	  driver to operate in Peripheral-only mode. This option requires
+	  USB_GADGET to be enabled.
+
+config USB_DWC2_DUAL_ROLE
+	bool "Dual Role mode"
+	depends on (USB=y && USB_GADGET=y) || (USB_DWC2=m && USB && USB_GADGET)
+	help
+	  Select this option if you want the driver to work in a dual-role
+	  mode. In this mode both host and gadget features are enabled, and
+	  the role will be determined by the cable that gets plugged-in. This
+	  option requires USB_GADGET to be enabled.
+endchoice
+
+config USB_DWC2_PCI
+	tristate "DWC2 PCI"
+	depends on USB_PCI
+	depends on USB_GADGET || !USB_GADGET
+	select NOP_USB_XCEIV
+	help
+	  The Designware USB2.0 PCI interface module for controllers
+	  connected to a PCI bus.
+
+config USB_DWC2_DEBUG
+	bool "Enable Debugging Messages"
+	help
+	  Say Y here to enable debugging messages in the DWC2 Driver.
+
+config USB_DWC2_VERBOSE
+	bool "Enable Verbose Debugging Messages"
+	depends on USB_DWC2_DEBUG
+	help
+	  Say Y here to enable verbose debugging messages in the DWC2 Driver.
+	  WARNING: Enabling this will quickly fill your message log.
+	  If in doubt, say N.
+
+config USB_DWC2_TRACK_MISSED_SOFS
+	bool "Enable Missed SOF Tracking"
+	help
+	  Say Y here to enable logging of missed SOF events to the dmesg log.
+	  WARNING: This feature is still experimental.
+	  If in doubt, say N.
+
+config USB_DWC2_DEBUG_PERIODIC
+	bool "Enable Debugging Messages For Periodic Transfers"
+	depends on USB_DWC2_DEBUG || USB_DWC2_VERBOSE
+	default y
+	help
+	  Say N here to disable (verbose) debugging messages to be
+	  logged for periodic transfers. This allows better debugging of
+	  non-periodic transfers, but of course the debug logs will be
+	  incomplete. Note that this also disables some debug messages
+	  for which the transfer type cannot be deduced.
+endif
diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile
new file mode 100644
index 000000000..2bcd6945d
--- /dev/null
+++ b/drivers/usb/dwc2/Makefile
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0
+ccflags-$(CONFIG_USB_DWC2_DEBUG)	+= -DDEBUG
+ccflags-$(CONFIG_USB_DWC2_VERBOSE)	+= -DVERBOSE_DEBUG
+
+obj-$(CONFIG_USB_DWC2)			+= dwc2.o
+dwc2-y					:= core.o core_intr.o platform.o drd.o
+dwc2-y					+= params.o
+
+ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),)
+	dwc2-y				+= hcd.o hcd_intr.o
+	dwc2-y				+= hcd_queue.o hcd_ddma.o
+endif
+
+ifneq ($(filter y,$(CONFIG_USB_DWC2_PERIPHERAL) $(CONFIG_USB_DWC2_DUAL_ROLE)),)
+	dwc2-y       			+= gadget.o
+endif
+
+ifneq ($(CONFIG_DEBUG_FS),)
+	dwc2-y				+= debugfs.o
+endif
+
+# NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to
+# this location and renamed gadget.c. When building for dynamically linked
+# modules, dwc2.ko will get built for host mode, peripheral mode, and dual-role
+# mode. The PCI bus interface module will called dwc2_pci.ko and the platform
+# interface module will be called dwc2_platform.ko.
+
+obj-$(CONFIG_USB_DWC2_PCI)		+= dwc2_pci.o
+dwc2_pci-y				:= pci.o
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
new file mode 100644
index 000000000..5635e4d7e
--- /dev/null
+++ b/drivers/usb/dwc2/core.c
@@ -0,0 +1,1174 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * core.c - DesignWare HS OTG Controller common routines
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ */
+
+/*
+ * The Core code provides basic services for accessing and managing the
+ * DWC_otg hardware. These services are used by both the Host Controller
+ * Driver and the Peripheral Controller Driver.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+
+#include "core.h"
+#include "hcd.h"
+
+/**
+ * dwc2_backup_global_registers() - Backup global controller registers.
+ * When suspending usb bus, registers needs to be backuped
+ * if controller power is disabled once suspended.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_backup_global_registers(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_gregs_backup *gr;
+
+	dev_dbg(hsotg->dev, "%s\n", __func__);
+
+	/* Backup global regs */
+	gr = &hsotg->gr_backup;
+
+	gr->gotgctl = dwc2_readl(hsotg, GOTGCTL);
+	gr->gintmsk = dwc2_readl(hsotg, GINTMSK);
+	gr->gahbcfg = dwc2_readl(hsotg, GAHBCFG);
+	gr->gusbcfg = dwc2_readl(hsotg, GUSBCFG);
+	gr->grxfsiz = dwc2_readl(hsotg, GRXFSIZ);
+	gr->gnptxfsiz = dwc2_readl(hsotg, GNPTXFSIZ);
+	gr->gdfifocfg = dwc2_readl(hsotg, GDFIFOCFG);
+	gr->pcgcctl1 = dwc2_readl(hsotg, PCGCCTL1);
+	gr->glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+	gr->gi2cctl = dwc2_readl(hsotg, GI2CCTL);
+	gr->pcgcctl = dwc2_readl(hsotg, PCGCTL);
+
+	gr->valid = true;
+	return 0;
+}
+
+/**
+ * dwc2_restore_global_registers() - Restore controller global registers.
+ * When resuming usb bus, device registers needs to be restored
+ * if controller power were disabled.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_restore_global_registers(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_gregs_backup *gr;
+
+	dev_dbg(hsotg->dev, "%s\n", __func__);
+
+	/* Restore global regs */
+	gr = &hsotg->gr_backup;
+	if (!gr->valid) {
+		dev_err(hsotg->dev, "%s: no global registers to restore\n",
+			__func__);
+		return -EINVAL;
+	}
+	gr->valid = false;
+
+	dwc2_writel(hsotg, 0xffffffff, GINTSTS);
+	dwc2_writel(hsotg, gr->gotgctl, GOTGCTL);
+	dwc2_writel(hsotg, gr->gintmsk, GINTMSK);
+	dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
+	dwc2_writel(hsotg, gr->gahbcfg, GAHBCFG);
+	dwc2_writel(hsotg, gr->grxfsiz, GRXFSIZ);
+	dwc2_writel(hsotg, gr->gnptxfsiz, GNPTXFSIZ);
+	dwc2_writel(hsotg, gr->gdfifocfg, GDFIFOCFG);
+	dwc2_writel(hsotg, gr->pcgcctl1, PCGCCTL1);
+	dwc2_writel(hsotg, gr->glpmcfg, GLPMCFG);
+	dwc2_writel(hsotg, gr->pcgcctl, PCGCTL);
+	dwc2_writel(hsotg, gr->gi2cctl, GI2CCTL);
+
+	return 0;
+}
+
+/**
+ * dwc2_exit_partial_power_down() - Exit controller from Partial Power Down.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @rem_wakeup: indicates whether resume is initiated by Reset.
+ * @restore: Controller registers need to be restored
+ */
+int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, int rem_wakeup,
+				 bool restore)
+{
+	struct dwc2_gregs_backup *gr;
+
+	gr = &hsotg->gr_backup;
+
+	/*
+	 * Restore host or device regisers with the same mode core enterted
+	 * to partial power down by checking "GOTGCTL_CURMODE_HOST" backup
+	 * value of the "gotgctl" register.
+	 */
+	if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
+		return dwc2_host_exit_partial_power_down(hsotg, rem_wakeup,
+							 restore);
+	else
+		return dwc2_gadget_exit_partial_power_down(hsotg, restore);
+}
+
+/**
+ * dwc2_enter_partial_power_down() - Put controller in Partial Power Down.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_enter_partial_power_down(struct dwc2_hsotg *hsotg)
+{
+	if (dwc2_is_host_mode(hsotg))
+		return dwc2_host_enter_partial_power_down(hsotg);
+	else
+		return dwc2_gadget_enter_partial_power_down(hsotg);
+}
+
+/**
+ * dwc2_restore_essential_regs() - Restore essiential regs of core.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @rmode: Restore mode, enabled in case of remote-wakeup.
+ * @is_host: Host or device mode.
+ */
+static void dwc2_restore_essential_regs(struct dwc2_hsotg *hsotg, int rmode,
+					int is_host)
+{
+	u32 pcgcctl;
+	struct dwc2_gregs_backup *gr;
+	struct dwc2_dregs_backup *dr;
+	struct dwc2_hregs_backup *hr;
+
+	gr = &hsotg->gr_backup;
+	dr = &hsotg->dr_backup;
+	hr = &hsotg->hr_backup;
+
+	dev_dbg(hsotg->dev, "%s: restoring essential regs\n", __func__);
+
+	/* Load restore values for [31:14] bits */
+	pcgcctl = (gr->pcgcctl & 0xffffc000);
+	/* If High Speed */
+	if (is_host) {
+		if (!(pcgcctl & PCGCTL_P2HD_PRT_SPD_MASK))
+			pcgcctl |= BIT(17);
+	} else {
+		if (!(pcgcctl & PCGCTL_P2HD_DEV_ENUM_SPD_MASK))
+			pcgcctl |= BIT(17);
+	}
+	dwc2_writel(hsotg, pcgcctl, PCGCTL);
+
+	/* Umnask global Interrupt in GAHBCFG and restore it */
+	dwc2_writel(hsotg, gr->gahbcfg | GAHBCFG_GLBL_INTR_EN, GAHBCFG);
+
+	/* Clear all pending interupts */
+	dwc2_writel(hsotg, 0xffffffff, GINTSTS);
+
+	/* Unmask restore done interrupt */
+	dwc2_writel(hsotg, GINTSTS_RESTOREDONE, GINTMSK);
+
+	/* Restore GUSBCFG and HCFG/DCFG */
+	dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
+
+	if (is_host) {
+		dwc2_writel(hsotg, hr->hcfg, HCFG);
+		if (rmode)
+			pcgcctl |= PCGCTL_RESTOREMODE;
+		dwc2_writel(hsotg, pcgcctl, PCGCTL);
+		udelay(10);
+
+		pcgcctl |= PCGCTL_ESS_REG_RESTORED;
+		dwc2_writel(hsotg, pcgcctl, PCGCTL);
+		udelay(10);
+	} else {
+		dwc2_writel(hsotg, dr->dcfg, DCFG);
+		if (!rmode)
+			pcgcctl |= PCGCTL_RESTOREMODE | PCGCTL_RSTPDWNMODULE;
+		dwc2_writel(hsotg, pcgcctl, PCGCTL);
+		udelay(10);
+
+		pcgcctl |= PCGCTL_ESS_REG_RESTORED;
+		dwc2_writel(hsotg, pcgcctl, PCGCTL);
+		udelay(10);
+	}
+}
+
+/**
+ * dwc2_hib_restore_common() - Common part of restore routine.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup.
+ * @is_host: Host or device mode.
+ */
+void dwc2_hib_restore_common(struct dwc2_hsotg *hsotg, int rem_wakeup,
+			     int is_host)
+{
+	u32 gpwrdn;
+
+	/* Switch-on voltage to the core */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn &= ~GPWRDN_PWRDNSWTCH;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Reset core */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn &= ~GPWRDN_PWRDNRSTN;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Enable restore from PMU */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn |= GPWRDN_RESTORE;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Disable Power Down Clamp */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn &= ~GPWRDN_PWRDNCLMP;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(50);
+
+	if (!is_host && rem_wakeup)
+		udelay(70);
+
+	/* Deassert reset core */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn |= GPWRDN_PWRDNRSTN;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Disable PMU interrupt */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn &= ~GPWRDN_PMUINTSEL;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Set Restore Essential Regs bit in PCGCCTL register */
+	dwc2_restore_essential_regs(hsotg, rem_wakeup, is_host);
+
+	/*
+	 * Wait For Restore_done Interrupt. This mechanism of polling the
+	 * interrupt is introduced to avoid any possible race conditions
+	 */
+	if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS, GINTSTS_RESTOREDONE,
+				    20000)) {
+		dev_dbg(hsotg->dev,
+			"%s: Restore Done wasn't generated here\n",
+			__func__);
+	} else {
+		dev_dbg(hsotg->dev, "restore done  generated here\n");
+
+		/*
+		 * To avoid restore done interrupt storm after restore is
+		 * generated clear GINTSTS_RESTOREDONE bit.
+		 */
+		dwc2_writel(hsotg, GINTSTS_RESTOREDONE, GINTSTS);
+	}
+}
+
+/**
+ * dwc2_wait_for_mode() - Waits for the controller mode.
+ * @hsotg:	Programming view of the DWC_otg controller.
+ * @host_mode:	If true, waits for host mode, otherwise device mode.
+ */
+static void dwc2_wait_for_mode(struct dwc2_hsotg *hsotg,
+			       bool host_mode)
+{
+	ktime_t start;
+	ktime_t end;
+	unsigned int timeout = 110;
+
+	dev_vdbg(hsotg->dev, "Waiting for %s mode\n",
+		 host_mode ? "host" : "device");
+
+	start = ktime_get();
+
+	while (1) {
+		s64 ms;
+
+		if (dwc2_is_host_mode(hsotg) == host_mode) {
+			dev_vdbg(hsotg->dev, "%s mode set\n",
+				 host_mode ? "Host" : "Device");
+			break;
+		}
+
+		end = ktime_get();
+		ms = ktime_to_ms(ktime_sub(end, start));
+
+		if (ms >= (s64)timeout) {
+			dev_warn(hsotg->dev, "%s: Couldn't set %s mode\n",
+				 __func__, host_mode ? "host" : "device");
+			break;
+		}
+
+		usleep_range(1000, 2000);
+	}
+}
+
+/**
+ * dwc2_iddig_filter_enabled() - Returns true if the IDDIG debounce
+ * filter is enabled.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static bool dwc2_iddig_filter_enabled(struct dwc2_hsotg *hsotg)
+{
+	u32 gsnpsid;
+	u32 ghwcfg4;
+
+	if (!dwc2_hw_is_otg(hsotg))
+		return false;
+
+	/* Check if core configuration includes the IDDIG filter. */
+	ghwcfg4 = dwc2_readl(hsotg, GHWCFG4);
+	if (!(ghwcfg4 & GHWCFG4_IDDIG_FILT_EN))
+		return false;
+
+	/*
+	 * Check if the IDDIG debounce filter is bypassed. Available
+	 * in core version >= 3.10a.
+	 */
+	gsnpsid = dwc2_readl(hsotg, GSNPSID);
+	if (gsnpsid >= DWC2_CORE_REV_3_10a) {
+		u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
+
+		if (gotgctl & GOTGCTL_DBNCE_FLTR_BYPASS)
+			return false;
+	}
+
+	return true;
+}
+
+/*
+ * dwc2_enter_hibernation() - Common function to enter hibernation.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @is_host: True if core is in host mode.
+ *
+ * Return: 0 if successful, negative error code otherwise
+ */
+int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg, int is_host)
+{
+	if (is_host)
+		return dwc2_host_enter_hibernation(hsotg);
+	else
+		return dwc2_gadget_enter_hibernation(hsotg);
+}
+
+/*
+ * dwc2_exit_hibernation() - Common function to exit from hibernation.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup.
+ * @reset: Enabled in case of restore with reset.
+ * @is_host: True if core is in host mode.
+ *
+ * Return: 0 if successful, negative error code otherwise
+ */
+int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
+			  int reset, int is_host)
+{
+	if (is_host)
+		return dwc2_host_exit_hibernation(hsotg, rem_wakeup, reset);
+	else
+		return dwc2_gadget_exit_hibernation(hsotg, rem_wakeup, reset);
+}
+
+/*
+ * Do core a soft reset of the core.  Be careful with this because it
+ * resets all the internal state machines of the core.
+ */
+int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait)
+{
+	u32 greset;
+	bool wait_for_host_mode = false;
+
+	dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	/*
+	 * If the current mode is host, either due to the force mode
+	 * bit being set (which persists after core reset) or the
+	 * connector id pin, a core soft reset will temporarily reset
+	 * the mode to device. A delay from the IDDIG debounce filter
+	 * will occur before going back to host mode.
+	 *
+	 * Determine whether we will go back into host mode after a
+	 * reset and account for this delay after the reset.
+	 */
+	if (dwc2_iddig_filter_enabled(hsotg)) {
+		u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
+		u32 gusbcfg = dwc2_readl(hsotg, GUSBCFG);
+
+		if (!(gotgctl & GOTGCTL_CONID_B) ||
+		    (gusbcfg & GUSBCFG_FORCEHOSTMODE)) {
+			wait_for_host_mode = true;
+		}
+	}
+
+	/* Core Soft Reset */
+	greset = dwc2_readl(hsotg, GRSTCTL);
+	greset |= GRSTCTL_CSFTRST;
+	dwc2_writel(hsotg, greset, GRSTCTL);
+
+	if ((hsotg->hw_params.snpsid & DWC2_CORE_REV_MASK) <
+		(DWC2_CORE_REV_4_20a & DWC2_CORE_REV_MASK)) {
+		if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL,
+					      GRSTCTL_CSFTRST, 10000)) {
+			dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL_CSFTRST\n",
+				 __func__);
+			return -EBUSY;
+		}
+	} else {
+		if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL,
+					    GRSTCTL_CSFTRST_DONE, 10000)) {
+			dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL_CSFTRST_DONE\n",
+				 __func__);
+			return -EBUSY;
+		}
+		greset = dwc2_readl(hsotg, GRSTCTL);
+		greset &= ~GRSTCTL_CSFTRST;
+		greset |= GRSTCTL_CSFTRST_DONE;
+		dwc2_writel(hsotg, greset, GRSTCTL);
+	}
+
+	/*
+	 * Switching from device mode to host mode by disconnecting
+	 * device cable core enters and exits form hibernation.
+	 * However, the fifo map remains not cleared. It results
+	 * to a WARNING (WARNING: CPU: 5 PID: 0 at drivers/usb/dwc2/
+	 * gadget.c:307 dwc2_hsotg_init_fifo+0x12/0x152 [dwc2])
+	 * if in host mode we disconnect the micro a to b host
+	 * cable. Because core reset occurs.
+	 * To avoid the WARNING, fifo_map should be cleared
+	 * in dwc2_core_reset() function by taking into account configs.
+	 * fifo_map must be cleared only if driver is configured in
+	 * "CONFIG_USB_DWC2_PERIPHERAL" or "CONFIG_USB_DWC2_DUAL_ROLE"
+	 * mode.
+	 */
+	dwc2_clear_fifo_map(hsotg);
+
+	/* Wait for AHB master IDLE state */
+	if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) {
+		dev_warn(hsotg->dev, "%s: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE\n",
+			 __func__);
+		return -EBUSY;
+	}
+
+	if (wait_for_host_mode && !skip_wait)
+		dwc2_wait_for_mode(hsotg, true);
+
+	return 0;
+}
+
+/**
+ * dwc2_force_mode() - Force the mode of the controller.
+ *
+ * Forcing the mode is needed for two cases:
+ *
+ * 1) If the dr_mode is set to either HOST or PERIPHERAL we force the
+ * controller to stay in a particular mode regardless of ID pin
+ * changes. We do this once during probe.
+ *
+ * 2) During probe we want to read reset values of the hw
+ * configuration registers that are only available in either host or
+ * device mode. We may need to force the mode if the current mode does
+ * not allow us to access the register in the mode that we want.
+ *
+ * In either case it only makes sense to force the mode if the
+ * controller hardware is OTG capable.
+ *
+ * Checks are done in this function to determine whether doing a force
+ * would be valid or not.
+ *
+ * If a force is done, it requires a IDDIG debounce filter delay if
+ * the filter is configured and enabled. We poll the current mode of
+ * the controller to account for this delay.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @host: Host mode flag
+ */
+void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
+{
+	u32 gusbcfg;
+	u32 set;
+	u32 clear;
+
+	dev_dbg(hsotg->dev, "Forcing mode to %s\n", host ? "host" : "device");
+
+	/*
+	 * Force mode has no effect if the hardware is not OTG.
+	 */
+	if (!dwc2_hw_is_otg(hsotg))
+		return;
+
+	/*
+	 * If dr_mode is either peripheral or host only, there is no
+	 * need to ever force the mode to the opposite mode.
+	 */
+	if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
+		return;
+
+	if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST))
+		return;
+
+	gusbcfg = dwc2_readl(hsotg, GUSBCFG);
+
+	set = host ? GUSBCFG_FORCEHOSTMODE : GUSBCFG_FORCEDEVMODE;
+	clear = host ? GUSBCFG_FORCEDEVMODE : GUSBCFG_FORCEHOSTMODE;
+
+	gusbcfg &= ~clear;
+	gusbcfg |= set;
+	dwc2_writel(hsotg, gusbcfg, GUSBCFG);
+
+	dwc2_wait_for_mode(hsotg, host);
+	return;
+}
+
+/**
+ * dwc2_clear_force_mode() - Clears the force mode bits.
+ *
+ * After clearing the bits, wait up to 100 ms to account for any
+ * potential IDDIG filter delay. We can't know if we expect this delay
+ * or not because the value of the connector ID status is affected by
+ * the force mode. We only need to call this once during probe if
+ * dr_mode == OTG.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
+{
+	u32 gusbcfg;
+
+	if (!dwc2_hw_is_otg(hsotg))
+		return;
+
+	dev_dbg(hsotg->dev, "Clearing force mode bits\n");
+
+	gusbcfg = dwc2_readl(hsotg, GUSBCFG);
+	gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
+	gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
+	dwc2_writel(hsotg, gusbcfg, GUSBCFG);
+
+	if (dwc2_iddig_filter_enabled(hsotg))
+		msleep(100);
+}
+
+/*
+ * Sets or clears force mode based on the dr_mode parameter.
+ */
+void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
+{
+	switch (hsotg->dr_mode) {
+	case USB_DR_MODE_HOST:
+		/*
+		 * NOTE: This is required for some rockchip soc based
+		 * platforms on their host-only dwc2.
+		 */
+		if (!dwc2_hw_is_otg(hsotg))
+			msleep(50);
+
+		break;
+	case USB_DR_MODE_PERIPHERAL:
+		dwc2_force_mode(hsotg, false);
+		break;
+	case USB_DR_MODE_OTG:
+		dwc2_clear_force_mode(hsotg);
+		break;
+	default:
+		dev_warn(hsotg->dev, "%s() Invalid dr_mode=%d\n",
+			 __func__, hsotg->dr_mode);
+		break;
+	}
+}
+
+/*
+ * dwc2_enable_acg - enable active clock gating feature
+ */
+void dwc2_enable_acg(struct dwc2_hsotg *hsotg)
+{
+	if (hsotg->params.acg_enable) {
+		u32 pcgcctl1 = dwc2_readl(hsotg, PCGCCTL1);
+
+		dev_dbg(hsotg->dev, "Enabling Active Clock Gating\n");
+		pcgcctl1 |= PCGCCTL1_GATEEN;
+		dwc2_writel(hsotg, pcgcctl1, PCGCCTL1);
+	}
+}
+
+/**
+ * dwc2_dump_host_registers() - Prints the host registers
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * NOTE: This function will be removed once the peripheral controller code
+ * is integrated and the driver is stable
+ */
+void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg)
+{
+#ifdef DEBUG
+	u32 __iomem *addr;
+	int i;
+
+	dev_dbg(hsotg->dev, "Host Global Registers\n");
+	addr = hsotg->regs + HCFG;
+	dev_dbg(hsotg->dev, "HCFG	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, HCFG));
+	addr = hsotg->regs + HFIR;
+	dev_dbg(hsotg->dev, "HFIR	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, HFIR));
+	addr = hsotg->regs + HFNUM;
+	dev_dbg(hsotg->dev, "HFNUM	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, HFNUM));
+	addr = hsotg->regs + HPTXSTS;
+	dev_dbg(hsotg->dev, "HPTXSTS	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, HPTXSTS));
+	addr = hsotg->regs + HAINT;
+	dev_dbg(hsotg->dev, "HAINT	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, HAINT));
+	addr = hsotg->regs + HAINTMSK;
+	dev_dbg(hsotg->dev, "HAINTMSK	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, HAINTMSK));
+	if (hsotg->params.dma_desc_enable) {
+		addr = hsotg->regs + HFLBADDR;
+		dev_dbg(hsotg->dev, "HFLBADDR @0x%08lX : 0x%08X\n",
+			(unsigned long)addr, dwc2_readl(hsotg, HFLBADDR));
+	}
+
+	addr = hsotg->regs + HPRT0;
+	dev_dbg(hsotg->dev, "HPRT0	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, HPRT0));
+
+	for (i = 0; i < hsotg->params.host_channels; i++) {
+		dev_dbg(hsotg->dev, "Host Channel %d Specific Registers\n", i);
+		addr = hsotg->regs + HCCHAR(i);
+		dev_dbg(hsotg->dev, "HCCHAR	 @0x%08lX : 0x%08X\n",
+			(unsigned long)addr, dwc2_readl(hsotg, HCCHAR(i)));
+		addr = hsotg->regs + HCSPLT(i);
+		dev_dbg(hsotg->dev, "HCSPLT	 @0x%08lX : 0x%08X\n",
+			(unsigned long)addr, dwc2_readl(hsotg, HCSPLT(i)));
+		addr = hsotg->regs + HCINT(i);
+		dev_dbg(hsotg->dev, "HCINT	 @0x%08lX : 0x%08X\n",
+			(unsigned long)addr, dwc2_readl(hsotg, HCINT(i)));
+		addr = hsotg->regs + HCINTMSK(i);
+		dev_dbg(hsotg->dev, "HCINTMSK	 @0x%08lX : 0x%08X\n",
+			(unsigned long)addr, dwc2_readl(hsotg, HCINTMSK(i)));
+		addr = hsotg->regs + HCTSIZ(i);
+		dev_dbg(hsotg->dev, "HCTSIZ	 @0x%08lX : 0x%08X\n",
+			(unsigned long)addr, dwc2_readl(hsotg, HCTSIZ(i)));
+		addr = hsotg->regs + HCDMA(i);
+		dev_dbg(hsotg->dev, "HCDMA	 @0x%08lX : 0x%08X\n",
+			(unsigned long)addr, dwc2_readl(hsotg, HCDMA(i)));
+		if (hsotg->params.dma_desc_enable) {
+			addr = hsotg->regs + HCDMAB(i);
+			dev_dbg(hsotg->dev, "HCDMAB	 @0x%08lX : 0x%08X\n",
+				(unsigned long)addr, dwc2_readl(hsotg,
+								HCDMAB(i)));
+		}
+	}
+#endif
+}
+
+/**
+ * dwc2_dump_global_registers() - Prints the core global registers
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * NOTE: This function will be removed once the peripheral controller code
+ * is integrated and the driver is stable
+ */
+void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg)
+{
+#ifdef DEBUG
+	u32 __iomem *addr;
+
+	dev_dbg(hsotg->dev, "Core Global Registers\n");
+	addr = hsotg->regs + GOTGCTL;
+	dev_dbg(hsotg->dev, "GOTGCTL	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GOTGCTL));
+	addr = hsotg->regs + GOTGINT;
+	dev_dbg(hsotg->dev, "GOTGINT	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GOTGINT));
+	addr = hsotg->regs + GAHBCFG;
+	dev_dbg(hsotg->dev, "GAHBCFG	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GAHBCFG));
+	addr = hsotg->regs + GUSBCFG;
+	dev_dbg(hsotg->dev, "GUSBCFG	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GUSBCFG));
+	addr = hsotg->regs + GRSTCTL;
+	dev_dbg(hsotg->dev, "GRSTCTL	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GRSTCTL));
+	addr = hsotg->regs + GINTSTS;
+	dev_dbg(hsotg->dev, "GINTSTS	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GINTSTS));
+	addr = hsotg->regs + GINTMSK;
+	dev_dbg(hsotg->dev, "GINTMSK	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GINTMSK));
+	addr = hsotg->regs + GRXSTSR;
+	dev_dbg(hsotg->dev, "GRXSTSR	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GRXSTSR));
+	addr = hsotg->regs + GRXFSIZ;
+	dev_dbg(hsotg->dev, "GRXFSIZ	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GRXFSIZ));
+	addr = hsotg->regs + GNPTXFSIZ;
+	dev_dbg(hsotg->dev, "GNPTXFSIZ	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GNPTXFSIZ));
+	addr = hsotg->regs + GNPTXSTS;
+	dev_dbg(hsotg->dev, "GNPTXSTS	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GNPTXSTS));
+	addr = hsotg->regs + GI2CCTL;
+	dev_dbg(hsotg->dev, "GI2CCTL	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GI2CCTL));
+	addr = hsotg->regs + GPVNDCTL;
+	dev_dbg(hsotg->dev, "GPVNDCTL	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GPVNDCTL));
+	addr = hsotg->regs + GGPIO;
+	dev_dbg(hsotg->dev, "GGPIO	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GGPIO));
+	addr = hsotg->regs + GUID;
+	dev_dbg(hsotg->dev, "GUID	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GUID));
+	addr = hsotg->regs + GSNPSID;
+	dev_dbg(hsotg->dev, "GSNPSID	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GSNPSID));
+	addr = hsotg->regs + GHWCFG1;
+	dev_dbg(hsotg->dev, "GHWCFG1	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GHWCFG1));
+	addr = hsotg->regs + GHWCFG2;
+	dev_dbg(hsotg->dev, "GHWCFG2	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GHWCFG2));
+	addr = hsotg->regs + GHWCFG3;
+	dev_dbg(hsotg->dev, "GHWCFG3	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GHWCFG3));
+	addr = hsotg->regs + GHWCFG4;
+	dev_dbg(hsotg->dev, "GHWCFG4	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GHWCFG4));
+	addr = hsotg->regs + GLPMCFG;
+	dev_dbg(hsotg->dev, "GLPMCFG	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GLPMCFG));
+	addr = hsotg->regs + GPWRDN;
+	dev_dbg(hsotg->dev, "GPWRDN	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GPWRDN));
+	addr = hsotg->regs + GDFIFOCFG;
+	dev_dbg(hsotg->dev, "GDFIFOCFG	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, GDFIFOCFG));
+	addr = hsotg->regs + HPTXFSIZ;
+	dev_dbg(hsotg->dev, "HPTXFSIZ	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, HPTXFSIZ));
+
+	addr = hsotg->regs + PCGCTL;
+	dev_dbg(hsotg->dev, "PCGCTL	 @0x%08lX : 0x%08X\n",
+		(unsigned long)addr, dwc2_readl(hsotg, PCGCTL));
+#endif
+}
+
+/**
+ * dwc2_flush_tx_fifo() - Flushes a Tx FIFO
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @num:   Tx FIFO to flush
+ */
+void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num)
+{
+	u32 greset;
+
+	dev_vdbg(hsotg->dev, "Flush Tx FIFO %d\n", num);
+
+	/* Wait for AHB master IDLE state */
+	if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000))
+		dev_warn(hsotg->dev, "%s:  HANG! AHB Idle GRSCTL\n",
+			 __func__);
+
+	greset = GRSTCTL_TXFFLSH;
+	greset |= num << GRSTCTL_TXFNUM_SHIFT & GRSTCTL_TXFNUM_MASK;
+	dwc2_writel(hsotg, greset, GRSTCTL);
+
+	if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_TXFFLSH, 10000))
+		dev_warn(hsotg->dev, "%s:  HANG! timeout GRSTCTL GRSTCTL_TXFFLSH\n",
+			 __func__);
+
+	/* Wait for at least 3 PHY Clocks */
+	udelay(1);
+}
+
+/**
+ * dwc2_flush_rx_fifo() - Flushes the Rx FIFO
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg)
+{
+	u32 greset;
+
+	dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	/* Wait for AHB master IDLE state */
+	if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000))
+		dev_warn(hsotg->dev, "%s:  HANG! AHB Idle GRSCTL\n",
+			 __func__);
+
+	greset = GRSTCTL_RXFFLSH;
+	dwc2_writel(hsotg, greset, GRSTCTL);
+
+	/* Wait for RxFIFO flush done */
+	if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_RXFFLSH, 10000))
+		dev_warn(hsotg->dev, "%s: HANG! timeout GRSTCTL GRSTCTL_RXFFLSH\n",
+			 __func__);
+
+	/* Wait for at least 3 PHY Clocks */
+	udelay(1);
+}
+
+bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg)
+{
+	if (dwc2_readl(hsotg, GSNPSID) == 0xffffffff)
+		return false;
+	else
+		return true;
+}
+
+/**
+ * dwc2_enable_global_interrupts() - Enables the controller's Global
+ * Interrupt in the AHB Config register
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+void dwc2_enable_global_interrupts(struct dwc2_hsotg *hsotg)
+{
+	u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);
+
+	ahbcfg |= GAHBCFG_GLBL_INTR_EN;
+	dwc2_writel(hsotg, ahbcfg, GAHBCFG);
+}
+
+/**
+ * dwc2_disable_global_interrupts() - Disables the controller's Global
+ * Interrupt in the AHB Config register
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg)
+{
+	u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);
+
+	ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
+	dwc2_writel(hsotg, ahbcfg, GAHBCFG);
+}
+
+/* Returns the controller's GHWCFG2.OTG_MODE. */
+unsigned int dwc2_op_mode(struct dwc2_hsotg *hsotg)
+{
+	u32 ghwcfg2 = dwc2_readl(hsotg, GHWCFG2);
+
+	return (ghwcfg2 & GHWCFG2_OP_MODE_MASK) >>
+		GHWCFG2_OP_MODE_SHIFT;
+}
+
+/* Returns true if the controller is capable of DRD. */
+bool dwc2_hw_is_otg(struct dwc2_hsotg *hsotg)
+{
+	unsigned int op_mode = dwc2_op_mode(hsotg);
+
+	return (op_mode == GHWCFG2_OP_MODE_HNP_SRP_CAPABLE) ||
+		(op_mode == GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE) ||
+		(op_mode == GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE);
+}
+
+/* Returns true if the controller is host-only. */
+bool dwc2_hw_is_host(struct dwc2_hsotg *hsotg)
+{
+	unsigned int op_mode = dwc2_op_mode(hsotg);
+
+	return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_HOST) ||
+		(op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST);
+}
+
+/* Returns true if the controller is device-only. */
+bool dwc2_hw_is_device(struct dwc2_hsotg *hsotg)
+{
+	unsigned int op_mode = dwc2_op_mode(hsotg);
+
+	return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
+		(op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE);
+}
+
+/**
+ * dwc2_hsotg_wait_bit_set - Waits for bit to be set.
+ * @hsotg: Programming view of DWC_otg controller.
+ * @offset: Register's offset where bit/bits must be set.
+ * @mask: Mask of the bit/bits which must be set.
+ * @timeout: Timeout to wait.
+ *
+ * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
+ */
+int dwc2_hsotg_wait_bit_set(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
+			    u32 timeout)
+{
+	u32 i;
+
+	for (i = 0; i < timeout; i++) {
+		if (dwc2_readl(hsotg, offset) & mask)
+			return 0;
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+/**
+ * dwc2_hsotg_wait_bit_clear - Waits for bit to be clear.
+ * @hsotg: Programming view of DWC_otg controller.
+ * @offset: Register's offset where bit/bits must be set.
+ * @mask: Mask of the bit/bits which must be set.
+ * @timeout: Timeout to wait.
+ *
+ * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
+ */
+int dwc2_hsotg_wait_bit_clear(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
+			      u32 timeout)
+{
+	u32 i;
+
+	for (i = 0; i < timeout; i++) {
+		if (!(dwc2_readl(hsotg, offset) & mask))
+			return 0;
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+/*
+ * Initializes the FSLSPClkSel field of the HCFG register depending on the
+ * PHY type
+ */
+void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
+{
+	u32 hcfg, val;
+
+	if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
+	     hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
+	     hsotg->params.ulpi_fs_ls) ||
+	    hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
+		/* Full speed PHY */
+		val = HCFG_FSLSPCLKSEL_48_MHZ;
+	} else {
+		/* High speed PHY running at full speed or high speed */
+		val = HCFG_FSLSPCLKSEL_30_60_MHZ;
+	}
+
+	dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
+	hcfg = dwc2_readl(hsotg, HCFG);
+	hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
+	hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
+	dwc2_writel(hsotg, hcfg, HCFG);
+}
+
+static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
+{
+	u32 usbcfg, ggpio, i2cctl;
+	int retval = 0;
+
+	/*
+	 * core_init() is now called on every switch so only call the
+	 * following for the first time through
+	 */
+	if (select_phy) {
+		dev_dbg(hsotg->dev, "FS PHY selected\n");
+
+		usbcfg = dwc2_readl(hsotg, GUSBCFG);
+		if (!(usbcfg & GUSBCFG_PHYSEL)) {
+			usbcfg |= GUSBCFG_PHYSEL;
+			dwc2_writel(hsotg, usbcfg, GUSBCFG);
+
+			/* Reset after a PHY select */
+			retval = dwc2_core_reset(hsotg, false);
+
+			if (retval) {
+				dev_err(hsotg->dev,
+					"%s: Reset failed, aborting", __func__);
+				return retval;
+			}
+		}
+
+		if (hsotg->params.activate_stm_fs_transceiver) {
+			ggpio = dwc2_readl(hsotg, GGPIO);
+			if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN)) {
+				dev_dbg(hsotg->dev, "Activating transceiver\n");
+				/*
+				 * STM32F4x9 uses the GGPIO register as general
+				 * core configuration register.
+				 */
+				ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN;
+				dwc2_writel(hsotg, ggpio, GGPIO);
+			}
+		}
+	}
+
+	/*
+	 * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
+	 * do this on HNP Dev/Host mode switches (done in dev_init and
+	 * host_init).
+	 */
+	if (dwc2_is_host_mode(hsotg))
+		dwc2_init_fs_ls_pclk_sel(hsotg);
+
+	if (hsotg->params.i2c_enable) {
+		dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");
+
+		/* Program GUSBCFG.OtgUtmiFsSel to I2C */
+		usbcfg = dwc2_readl(hsotg, GUSBCFG);
+		usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
+		dwc2_writel(hsotg, usbcfg, GUSBCFG);
+
+		/* Program GI2CCTL.I2CEn */
+		i2cctl = dwc2_readl(hsotg, GI2CCTL);
+		i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
+		i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
+		i2cctl &= ~GI2CCTL_I2CEN;
+		dwc2_writel(hsotg, i2cctl, GI2CCTL);
+		i2cctl |= GI2CCTL_I2CEN;
+		dwc2_writel(hsotg, i2cctl, GI2CCTL);
+	}
+
+	return retval;
+}
+
+static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
+{
+	u32 usbcfg, usbcfg_old;
+	int retval = 0;
+
+	if (!select_phy)
+		return 0;
+
+	usbcfg = dwc2_readl(hsotg, GUSBCFG);
+	usbcfg_old = usbcfg;
+
+	/*
+	 * HS PHY parameters. These parameters are preserved during soft reset
+	 * so only program the first time. Do a soft reset immediately after
+	 * setting phyif.
+	 */
+	switch (hsotg->params.phy_type) {
+	case DWC2_PHY_TYPE_PARAM_ULPI:
+		/* ULPI interface */
+		dev_dbg(hsotg->dev, "HS ULPI PHY selected\n");
+		usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
+		usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL);
+		if (hsotg->params.phy_ulpi_ddr)
+			usbcfg |= GUSBCFG_DDRSEL;
+
+		/* Set external VBUS indicator as needed. */
+		if (hsotg->params.oc_disable)
+			usbcfg |= (GUSBCFG_ULPI_INT_VBUS_IND |
+				   GUSBCFG_INDICATORPASSTHROUGH);
+		break;
+	case DWC2_PHY_TYPE_PARAM_UTMI:
+		/* UTMI+ interface */
+		dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n");
+		usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
+		if (hsotg->params.phy_utmi_width == 16)
+			usbcfg |= GUSBCFG_PHYIF16;
+		break;
+	default:
+		dev_err(hsotg->dev, "FS PHY selected at HS!\n");
+		break;
+	}
+
+	if (usbcfg != usbcfg_old) {
+		dwc2_writel(hsotg, usbcfg, GUSBCFG);
+
+		/* Reset after setting the PHY parameters */
+		retval = dwc2_core_reset(hsotg, false);
+		if (retval) {
+			dev_err(hsotg->dev,
+				"%s: Reset failed, aborting", __func__);
+			return retval;
+		}
+	}
+
+	return retval;
+}
+
+static void dwc2_set_turnaround_time(struct dwc2_hsotg *hsotg)
+{
+	u32 usbcfg;
+
+	if (hsotg->params.phy_type != DWC2_PHY_TYPE_PARAM_UTMI)
+		return;
+
+	usbcfg = dwc2_readl(hsotg, GUSBCFG);
+
+	usbcfg &= ~GUSBCFG_USBTRDTIM_MASK;
+	if (hsotg->params.phy_utmi_width == 16)
+		usbcfg |= 5 << GUSBCFG_USBTRDTIM_SHIFT;
+	else
+		usbcfg |= 9 << GUSBCFG_USBTRDTIM_SHIFT;
+
+	dwc2_writel(hsotg, usbcfg, GUSBCFG);
+}
+
+int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
+{
+	u32 usbcfg;
+	u32 otgctl;
+	int retval = 0;
+
+	if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
+	     hsotg->params.speed == DWC2_SPEED_PARAM_LOW) &&
+	    hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
+		/* If FS/LS mode with FS/LS PHY */
+		retval = dwc2_fs_phy_init(hsotg, select_phy);
+		if (retval)
+			return retval;
+	} else {
+		/* High speed PHY */
+		retval = dwc2_hs_phy_init(hsotg, select_phy);
+		if (retval)
+			return retval;
+
+		if (dwc2_is_device_mode(hsotg))
+			dwc2_set_turnaround_time(hsotg);
+	}
+
+	if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
+	    hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
+	    hsotg->params.ulpi_fs_ls) {
+		dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
+		usbcfg = dwc2_readl(hsotg, GUSBCFG);
+		usbcfg |= GUSBCFG_ULPI_FS_LS;
+		usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
+		dwc2_writel(hsotg, usbcfg, GUSBCFG);
+	} else {
+		usbcfg = dwc2_readl(hsotg, GUSBCFG);
+		usbcfg &= ~GUSBCFG_ULPI_FS_LS;
+		usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
+		dwc2_writel(hsotg, usbcfg, GUSBCFG);
+	}
+
+	if (!hsotg->params.activate_ingenic_overcurrent_detection) {
+		if (dwc2_is_host_mode(hsotg)) {
+			otgctl = readl(hsotg->regs + GOTGCTL);
+			otgctl |= GOTGCTL_VBVALOEN | GOTGCTL_VBVALOVAL;
+			writel(otgctl, hsotg->regs + GOTGCTL);
+		}
+	}
+
+	return retval;
+}
+
+MODULE_DESCRIPTION("DESIGNWARE HS OTG Core");
+MODULE_AUTHOR("Synopsys, Inc.");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
new file mode 100644
index 000000000..40cf2880d
--- /dev/null
+++ b/drivers/usb/dwc2/core.h
@@ -0,0 +1,1526 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * core.h - DesignWare HS OTG Controller common declarations
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ */
+
+#ifndef __DWC2_CORE_H__
+#define __DWC2_CORE_H__
+
+#include <linux/acpi.h>
+#include <linux/phy/phy.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/phy.h>
+#include "hw.h"
+
+/*
+ * Suggested defines for tracers:
+ * - no_printk:    Disable tracing
+ * - pr_info:      Print this info to the console
+ * - trace_printk: Print this info to trace buffer (good for verbose logging)
+ */
+
+#define DWC2_TRACE_SCHEDULER		no_printk
+#define DWC2_TRACE_SCHEDULER_VB		no_printk
+
+/* Detailed scheduler tracing, but won't overwhelm console */
+#define dwc2_sch_dbg(hsotg, fmt, ...)					\
+	DWC2_TRACE_SCHEDULER(pr_fmt("%s: SCH: " fmt),			\
+			     dev_name(hsotg->dev), ##__VA_ARGS__)
+
+/* Verbose scheduler tracing */
+#define dwc2_sch_vdbg(hsotg, fmt, ...)					\
+	DWC2_TRACE_SCHEDULER_VB(pr_fmt("%s: SCH: " fmt),		\
+				dev_name(hsotg->dev), ##__VA_ARGS__)
+
+/* Maximum number of Endpoints/HostChannels */
+#define MAX_EPS_CHANNELS	16
+
+/* dwc2-hsotg declarations */
+static const char * const dwc2_hsotg_supply_names[] = {
+	"vusb_d",               /* digital USB supply, 1.2V */
+	"vusb_a",               /* analog USB supply, 1.1V */
+};
+
+#define DWC2_NUM_SUPPLIES ARRAY_SIZE(dwc2_hsotg_supply_names)
+
+/*
+ * EP0_MPS_LIMIT
+ *
+ * Unfortunately there seems to be a limit of the amount of data that can
+ * be transferred by IN transactions on EP0. This is either 127 bytes or 3
+ * packets (which practically means 1 packet and 63 bytes of data) when the
+ * MPS is set to 64.
+ *
+ * This means if we are wanting to move >127 bytes of data, we need to
+ * split the transactions up, but just doing one packet at a time does
+ * not work (this may be an implicit DATA0 PID on first packet of the
+ * transaction) and doing 2 packets is outside the controller's limits.
+ *
+ * If we try to lower the MPS size for EP0, then no transfers work properly
+ * for EP0, and the system will fail basic enumeration. As no cause for this
+ * has currently been found, we cannot support any large IN transfers for
+ * EP0.
+ */
+#define EP0_MPS_LIMIT   64
+
+struct dwc2_hsotg;
+struct dwc2_hsotg_req;
+
+/**
+ * struct dwc2_hsotg_ep - driver endpoint definition.
+ * @ep: The gadget layer representation of the endpoint.
+ * @name: The driver generated name for the endpoint.
+ * @queue: Queue of requests for this endpoint.
+ * @parent: Reference back to the parent device structure.
+ * @req: The current request that the endpoint is processing. This is
+ *       used to indicate an request has been loaded onto the endpoint
+ *       and has yet to be completed (maybe due to data move, or simply
+ *       awaiting an ack from the core all the data has been completed).
+ * @debugfs: File entry for debugfs file for this endpoint.
+ * @dir_in: Set to true if this endpoint is of the IN direction, which
+ *          means that it is sending data to the Host.
+ * @map_dir: Set to the value of dir_in when the DMA buffer is mapped.
+ * @index: The index for the endpoint registers.
+ * @mc: Multi Count - number of transactions per microframe
+ * @interval: Interval for periodic endpoints, in frames or microframes.
+ * @name: The name array passed to the USB core.
+ * @halted: Set if the endpoint has been halted.
+ * @periodic: Set if this is a periodic ep, such as Interrupt
+ * @isochronous: Set if this is a isochronous ep
+ * @send_zlp: Set if we need to send a zero-length packet.
+ * @wedged: Set if ep is wedged.
+ * @desc_list_dma: The DMA address of descriptor chain currently in use.
+ * @desc_list: Pointer to descriptor DMA chain head currently in use.
+ * @desc_count: Count of entries within the DMA descriptor chain of EP.
+ * @next_desc: index of next free descriptor in the ISOC chain under SW control.
+ * @compl_desc: index of next descriptor to be completed by xFerComplete
+ * @total_data: The total number of data bytes done.
+ * @fifo_size: The size of the FIFO (for periodic IN endpoints)
+ * @fifo_index: For Dedicated FIFO operation, only FIFO0 can be used for EP0.
+ * @fifo_load: The amount of data loaded into the FIFO (periodic IN)
+ * @last_load: The offset of data for the last start of request.
+ * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN
+ * @target_frame: Targeted frame num to setup next ISOC transfer
+ * @frame_overrun: Indicates SOF number overrun in DSTS
+ *
+ * This is the driver's state for each registered endpoint, allowing it
+ * to keep track of transactions that need doing. Each endpoint has a
+ * lock to protect the state, to try and avoid using an overall lock
+ * for the host controller as much as possible.
+ *
+ * For periodic IN endpoints, we have fifo_size and fifo_load to try
+ * and keep track of the amount of data in the periodic FIFO for each
+ * of these as we don't have a status register that tells us how much
+ * is in each of them. (note, this may actually be useless information
+ * as in shared-fifo mode periodic in acts like a single-frame packet
+ * buffer than a fifo)
+ */
+struct dwc2_hsotg_ep {
+	struct usb_ep           ep;
+	struct list_head        queue;
+	struct dwc2_hsotg       *parent;
+	struct dwc2_hsotg_req    *req;
+	struct dentry           *debugfs;
+
+	unsigned long           total_data;
+	unsigned int            size_loaded;
+	unsigned int            last_load;
+	unsigned int            fifo_load;
+	unsigned short          fifo_size;
+	unsigned short		fifo_index;
+
+	unsigned char           dir_in;
+	unsigned char           map_dir;
+	unsigned char           index;
+	unsigned char           mc;
+	u16                     interval;
+
+	unsigned int            halted:1;
+	unsigned int            periodic:1;
+	unsigned int            isochronous:1;
+	unsigned int            send_zlp:1;
+	unsigned int            wedged:1;
+	unsigned int            target_frame;
+#define TARGET_FRAME_INITIAL   0xFFFFFFFF
+	bool			frame_overrun;
+
+	dma_addr_t		desc_list_dma;
+	struct dwc2_dma_desc	*desc_list;
+	u8			desc_count;
+
+	unsigned int		next_desc;
+	unsigned int		compl_desc;
+
+	char                    name[10];
+};
+
+/**
+ * struct dwc2_hsotg_req - data transfer request
+ * @req: The USB gadget request
+ * @queue: The list of requests for the endpoint this is queued for.
+ * @saved_req_buf: variable to save req.buf when bounce buffers are used.
+ */
+struct dwc2_hsotg_req {
+	struct usb_request      req;
+	struct list_head        queue;
+	void *saved_req_buf;
+};
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+#define call_gadget(_hs, _entry) \
+do { \
+	if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \
+		(_hs)->driver && (_hs)->driver->_entry) { \
+		spin_unlock(&_hs->lock); \
+		(_hs)->driver->_entry(&(_hs)->gadget); \
+		spin_lock(&_hs->lock); \
+	} \
+} while (0)
+#else
+#define call_gadget(_hs, _entry)	do {} while (0)
+#endif
+
+struct dwc2_hsotg;
+struct dwc2_host_chan;
+
+/* Device States */
+enum dwc2_lx_state {
+	DWC2_L0,	/* On state */
+	DWC2_L1,	/* LPM sleep state */
+	DWC2_L2,	/* USB suspend state */
+	DWC2_L3,	/* Off state */
+};
+
+/* Gadget ep0 states */
+enum dwc2_ep0_state {
+	DWC2_EP0_SETUP,
+	DWC2_EP0_DATA_IN,
+	DWC2_EP0_DATA_OUT,
+	DWC2_EP0_STATUS_IN,
+	DWC2_EP0_STATUS_OUT,
+};
+
+/**
+ * struct dwc2_core_params - Parameters for configuring the core
+ *
+ * @otg_caps:           Specifies the OTG capabilities. OTG caps from the platform parameters,
+ *                      used to setup the:
+ *                       - HNP and SRP capable
+ *                       - SRP Only capable
+ *                       - No HNP/SRP capable (always available)
+ *                       Defaults to best available option
+ *                       - OTG revision number the device is compliant with, in binary-coded
+ *                         decimal (i.e. 2.0 is 0200H). (see struct usb_otg_caps)
+ * @host_dma:           Specifies whether to use slave or DMA mode for accessing
+ *                      the data FIFOs. The driver will automatically detect the
+ *                      value for this parameter if none is specified.
+ *                       0 - Slave (always available)
+ *                       1 - DMA (default, if available)
+ * @dma_desc_enable:    When DMA mode is enabled, specifies whether to use
+ *                      address DMA mode or descriptor DMA mode for accessing
+ *                      the data FIFOs. The driver will automatically detect the
+ *                      value for this if none is specified.
+ *                       0 - Address DMA
+ *                       1 - Descriptor DMA (default, if available)
+ * @dma_desc_fs_enable: When DMA mode is enabled, specifies whether to use
+ *                      address DMA mode or descriptor DMA mode for accessing
+ *                      the data FIFOs in Full Speed mode only. The driver
+ *                      will automatically detect the value for this if none is
+ *                      specified.
+ *                       0 - Address DMA
+ *                       1 - Descriptor DMA in FS (default, if available)
+ * @speed:              Specifies the maximum speed of operation in host and
+ *                      device mode. The actual speed depends on the speed of
+ *                      the attached device and the value of phy_type.
+ *                       0 - High Speed
+ *                           (default when phy_type is UTMI+ or ULPI)
+ *                       1 - Full Speed
+ *                           (default when phy_type is Full Speed)
+ * @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters
+ *                       1 - Allow dynamic FIFO sizing (default, if available)
+ * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs
+ *                      are enabled for non-periodic IN endpoints in device
+ *                      mode.
+ * @host_rx_fifo_size:  Number of 4-byte words in the Rx FIFO in host mode when
+ *                      dynamic FIFO sizing is enabled
+ *                       16 to 32768
+ *                      Actual maximum value is autodetected and also
+ *                      the default.
+ * @host_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO
+ *                      in host mode when dynamic FIFO sizing is enabled
+ *                       16 to 32768
+ *                      Actual maximum value is autodetected and also
+ *                      the default.
+ * @host_perio_tx_fifo_size: Number of 4-byte words in the periodic Tx FIFO in
+ *                      host mode when dynamic FIFO sizing is enabled
+ *                       16 to 32768
+ *                      Actual maximum value is autodetected and also
+ *                      the default.
+ * @max_transfer_size:  The maximum transfer size supported, in bytes
+ *                       2047 to 65,535
+ *                      Actual maximum value is autodetected and also
+ *                      the default.
+ * @max_packet_count:   The maximum number of packets in a transfer
+ *                       15 to 511
+ *                      Actual maximum value is autodetected and also
+ *                      the default.
+ * @host_channels:      The number of host channel registers to use
+ *                       1 to 16
+ *                      Actual maximum value is autodetected and also
+ *                      the default.
+ * @phy_type:           Specifies the type of PHY interface to use. By default,
+ *                      the driver will automatically detect the phy_type.
+ *                       0 - Full Speed Phy
+ *                       1 - UTMI+ Phy
+ *                       2 - ULPI Phy
+ *                      Defaults to best available option (2, 1, then 0)
+ * @phy_utmi_width:     Specifies the UTMI+ Data Width (in bits). This parameter
+ *                      is applicable for a phy_type of UTMI+ or ULPI. (For a
+ *                      ULPI phy_type, this parameter indicates the data width
+ *                      between the MAC and the ULPI Wrapper.) Also, this
+ *                      parameter is applicable only if the OTG_HSPHY_WIDTH cC
+ *                      parameter was set to "8 and 16 bits", meaning that the
+ *                      core has been configured to work at either data path
+ *                      width.
+ *                       8 or 16 (default 16 if available)
+ * @phy_ulpi_ddr:       Specifies whether the ULPI operates at double or single
+ *                      data rate. This parameter is only applicable if phy_type
+ *                      is ULPI.
+ *                       0 - single data rate ULPI interface with 8 bit wide
+ *                           data bus (default)
+ *                       1 - double data rate ULPI interface with 4 bit wide
+ *                           data bus
+ * @phy_ulpi_ext_vbus:  For a ULPI phy, specifies whether to use the internal or
+ *                      external supply to drive the VBus
+ *                       0 - Internal supply (default)
+ *                       1 - External supply
+ * @i2c_enable:         Specifies whether to use the I2Cinterface for a full
+ *                      speed PHY. This parameter is only applicable if phy_type
+ *                      is FS.
+ *                       0 - No (default)
+ *                       1 - Yes
+ * @ipg_isoc_en:        Indicates the IPG supports is enabled or disabled.
+ *                       0 - Disable (default)
+ *                       1 - Enable
+ * @acg_enable:		For enabling Active Clock Gating in the controller
+ *                       0 - No
+ *                       1 - Yes
+ * @ulpi_fs_ls:         Make ULPI phy operate in FS/LS mode only
+ *                       0 - No (default)
+ *                       1 - Yes
+ * @host_support_fs_ls_low_power: Specifies whether low power mode is supported
+ *                      when attached to a Full Speed or Low Speed device in
+ *                      host mode.
+ *                       0 - Don't support low power mode (default)
+ *                       1 - Support low power mode
+ * @host_ls_low_power_phy_clk: Specifies the PHY clock rate in low power mode
+ *                      when connected to a Low Speed device in host
+ *                      mode. This parameter is applicable only if
+ *                      host_support_fs_ls_low_power is enabled.
+ *                       0 - 48 MHz
+ *                           (default when phy_type is UTMI+ or ULPI)
+ *                       1 - 6 MHz
+ *                           (default when phy_type is Full Speed)
+ * @oc_disable:		Flag to disable overcurrent condition.
+ *			0 - Allow overcurrent condition to get detected
+ *			1 - Disable overcurrent condtion to get detected
+ * @ts_dline:           Enable Term Select Dline pulsing
+ *                       0 - No (default)
+ *                       1 - Yes
+ * @reload_ctl:         Allow dynamic reloading of HFIR register during runtime
+ *                       0 - No (default for core < 2.92a)
+ *                       1 - Yes (default for core >= 2.92a)
+ * @ahbcfg:             This field allows the default value of the GAHBCFG
+ *                      register to be overridden
+ *                       -1         - GAHBCFG value will be set to 0x06
+ *                                    (INCR, default)
+ *                       all others - GAHBCFG value will be overridden with
+ *                                    this value
+ *                      Not all bits can be controlled like this, the
+ *                      bits defined by GAHBCFG_CTRL_MASK are controlled
+ *                      by the driver and are ignored in this
+ *                      configuration value.
+ * @uframe_sched:       True to enable the microframe scheduler
+ * @external_id_pin_ctl: Specifies whether ID pin is handled externally.
+ *                      Disable CONIDSTSCHNG controller interrupt in such
+ *                      case.
+ *                      0 - No (default)
+ *                      1 - Yes
+ * @power_down:         Specifies whether the controller support power_down.
+ *			If power_down is enabled, the controller will enter
+ *			power_down in both peripheral and host mode when
+ *			needed.
+ *			0 - No (default)
+ *			1 - Partial power down
+ *			2 - Hibernation
+ * @no_clock_gating:	Specifies whether to avoid clock gating feature.
+ *			0 - No (use clock gating)
+ *			1 - Yes (avoid it)
+ * @lpm:		Enable LPM support.
+ *			0 - No
+ *			1 - Yes
+ * @lpm_clock_gating:		Enable core PHY clock gating.
+ *			0 - No
+ *			1 - Yes
+ * @besl:		Enable LPM Errata support.
+ *			0 - No
+ *			1 - Yes
+ * @hird_threshold_en:	HIRD or HIRD Threshold enable.
+ *			0 - No
+ *			1 - Yes
+ * @hird_threshold:	Value of BESL or HIRD Threshold.
+ * @ref_clk_per:        Indicates in terms of pico seconds the period
+ *                      of ref_clk.
+ *			62500 - 16MHz
+ *                      58823 - 17MHz
+ *                      52083 - 19.2MHz
+ *			50000 - 20MHz
+ *			41666 - 24MHz
+ *			33333 - 30MHz (default)
+ *			25000 - 40MHz
+ * @sof_cnt_wkup_alert: Indicates in term of number of SOF's after which
+ *                      the controller should generate an interrupt if the
+ *                      device had been in L1 state until that period.
+ *                      This is used by SW to initiate Remote WakeUp in the
+ *                      controller so as to sync to the uF number from the host.
+ * @activate_stm_fs_transceiver: Activate internal transceiver using GGPIO
+ *			register.
+ *			0 - Deactivate the transceiver (default)
+ *			1 - Activate the transceiver
+ * @activate_stm_id_vb_detection: Activate external ID pin and Vbus level
+ *			detection using GGPIO register.
+ *			0 - Deactivate the external level detection (default)
+ *			1 - Activate the external level detection
+ * @activate_ingenic_overcurrent_detection: Activate Ingenic overcurrent
+ *			detection.
+ *			0 - Deactivate the overcurrent detection
+ *			1 - Activate the overcurrent detection (default)
+ * @g_dma:              Enables gadget dma usage (default: autodetect).
+ * @g_dma_desc:         Enables gadget descriptor DMA (default: autodetect).
+ * @g_rx_fifo_size:	The periodic rx fifo size for the device, in
+ *			DWORDS from 16-32768 (default: 2048 if
+ *			possible, otherwise autodetect).
+ * @g_np_tx_fifo_size:	The non-periodic tx fifo size for the device in
+ *			DWORDS from 16-32768 (default: 1024 if
+ *			possible, otherwise autodetect).
+ * @g_tx_fifo_size:	An array of TX fifo sizes in dedicated fifo
+ *			mode. Each value corresponds to one EP
+ *			starting from EP1 (max 15 values). Sizes are
+ *			in DWORDS with possible values from
+ *			16-32768 (default: 256, 256, 256, 256, 768,
+ *			768, 768, 768, 0, 0, 0, 0, 0, 0, 0).
+ * @change_speed_quirk: Change speed configuration to DWC2_SPEED_PARAM_FULL
+ *                      while full&low speed device connect. And change speed
+ *                      back to DWC2_SPEED_PARAM_HIGH while device is gone.
+ *			0 - No (default)
+ *			1 - Yes
+ * @service_interval:   Enable service interval based scheduling.
+ *                      0 - No
+ *                      1 - Yes
+ *
+ * The following parameters may be specified when starting the module. These
+ * parameters define how the DWC_otg controller should be configured. A
+ * value of -1 (or any other out of range value) for any parameter means
+ * to read the value from hardware (if possible) or use the builtin
+ * default described above.
+ */
+struct dwc2_core_params {
+	struct usb_otg_caps otg_caps;
+	u8 phy_type;
+#define DWC2_PHY_TYPE_PARAM_FS		0
+#define DWC2_PHY_TYPE_PARAM_UTMI	1
+#define DWC2_PHY_TYPE_PARAM_ULPI	2
+
+	u8 speed;
+#define DWC2_SPEED_PARAM_HIGH	0
+#define DWC2_SPEED_PARAM_FULL	1
+#define DWC2_SPEED_PARAM_LOW	2
+
+	u8 phy_utmi_width;
+	bool phy_ulpi_ddr;
+	bool phy_ulpi_ext_vbus;
+	bool enable_dynamic_fifo;
+	bool en_multiple_tx_fifo;
+	bool i2c_enable;
+	bool acg_enable;
+	bool ulpi_fs_ls;
+	bool ts_dline;
+	bool reload_ctl;
+	bool uframe_sched;
+	bool external_id_pin_ctl;
+
+	int power_down;
+#define DWC2_POWER_DOWN_PARAM_NONE		0
+#define DWC2_POWER_DOWN_PARAM_PARTIAL		1
+#define DWC2_POWER_DOWN_PARAM_HIBERNATION	2
+	bool no_clock_gating;
+
+	bool lpm;
+	bool lpm_clock_gating;
+	bool besl;
+	bool hird_threshold_en;
+	bool service_interval;
+	u8 hird_threshold;
+	bool activate_stm_fs_transceiver;
+	bool activate_stm_id_vb_detection;
+	bool activate_ingenic_overcurrent_detection;
+	bool ipg_isoc_en;
+	u16 max_packet_count;
+	u32 max_transfer_size;
+	u32 ahbcfg;
+
+	/* GREFCLK parameters */
+	u32 ref_clk_per;
+	u16 sof_cnt_wkup_alert;
+
+	/* Host parameters */
+	bool host_dma;
+	bool dma_desc_enable;
+	bool dma_desc_fs_enable;
+	bool host_support_fs_ls_low_power;
+	bool host_ls_low_power_phy_clk;
+	bool oc_disable;
+
+	u8 host_channels;
+	u16 host_rx_fifo_size;
+	u16 host_nperio_tx_fifo_size;
+	u16 host_perio_tx_fifo_size;
+
+	/* Gadget parameters */
+	bool g_dma;
+	bool g_dma_desc;
+	u32 g_rx_fifo_size;
+	u32 g_np_tx_fifo_size;
+	u32 g_tx_fifo_size[MAX_EPS_CHANNELS];
+
+	bool change_speed_quirk;
+};
+
+/**
+ * struct dwc2_hw_params - Autodetected parameters.
+ *
+ * These parameters are the various parameters read from hardware
+ * registers during initialization. They typically contain the best
+ * supported or maximum value that can be configured in the
+ * corresponding dwc2_core_params value.
+ *
+ * The values that are not in dwc2_core_params are documented below.
+ *
+ * @op_mode:             Mode of Operation
+ *                       0 - HNP- and SRP-Capable OTG (Host & Device)
+ *                       1 - SRP-Capable OTG (Host & Device)
+ *                       2 - Non-HNP and Non-SRP Capable OTG (Host & Device)
+ *                       3 - SRP-Capable Device
+ *                       4 - Non-OTG Device
+ *                       5 - SRP-Capable Host
+ *                       6 - Non-OTG Host
+ * @arch:                Architecture
+ *                       0 - Slave only
+ *                       1 - External DMA
+ *                       2 - Internal DMA
+ * @ipg_isoc_en:        This feature indicates that the controller supports
+ *                      the worst-case scenario of Rx followed by Rx
+ *                      Interpacket Gap (IPG) (32 bitTimes) as per the utmi
+ *                      specification for any token following ISOC OUT token.
+ *                       0 - Don't support
+ *                       1 - Support
+ * @power_optimized:    Are power optimizations enabled?
+ * @num_dev_ep:         Number of device endpoints available
+ * @num_dev_in_eps:     Number of device IN endpoints available
+ * @num_dev_perio_in_ep: Number of device periodic IN endpoints
+ *                       available
+ * @dev_token_q_depth:  Device Mode IN Token Sequence Learning Queue
+ *                      Depth
+ *                       0 to 30
+ * @host_perio_tx_q_depth:
+ *                      Host Mode Periodic Request Queue Depth
+ *                       2, 4 or 8
+ * @nperio_tx_q_depth:
+ *                      Non-Periodic Request Queue Depth
+ *                       2, 4 or 8
+ * @hs_phy_type:         High-speed PHY interface type
+ *                       0 - High-speed interface not supported
+ *                       1 - UTMI+
+ *                       2 - ULPI
+ *                       3 - UTMI+ and ULPI
+ * @fs_phy_type:         Full-speed PHY interface type
+ *                       0 - Full speed interface not supported
+ *                       1 - Dedicated full speed interface
+ *                       2 - FS pins shared with UTMI+ pins
+ *                       3 - FS pins shared with ULPI pins
+ * @total_fifo_size:    Total internal RAM for FIFOs (bytes)
+ * @hibernation:	Is hibernation enabled?
+ * @utmi_phy_data_width: UTMI+ PHY data width
+ *                       0 - 8 bits
+ *                       1 - 16 bits
+ *                       2 - 8 or 16 bits
+ * @snpsid:             Value from SNPSID register
+ * @dev_ep_dirs:        Direction of device endpoints (GHWCFG1)
+ * @g_tx_fifo_size:	Power-on values of TxFIFO sizes
+ * @dma_desc_enable:    When DMA mode is enabled, specifies whether to use
+ *                      address DMA mode or descriptor DMA mode for accessing
+ *                      the data FIFOs. The driver will automatically detect the
+ *                      value for this if none is specified.
+ *                       0 - Address DMA
+ *                       1 - Descriptor DMA (default, if available)
+ * @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters
+ *                       1 - Allow dynamic FIFO sizing (default, if available)
+ * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs
+ *                      are enabled for non-periodic IN endpoints in device
+ *                      mode.
+ * @host_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO
+ *                      in host mode when dynamic FIFO sizing is enabled
+ *                       16 to 32768
+ *                      Actual maximum value is autodetected and also
+ *                      the default.
+ * @host_perio_tx_fifo_size: Number of 4-byte words in the periodic Tx FIFO in
+ *                      host mode when dynamic FIFO sizing is enabled
+ *                       16 to 32768
+ *                      Actual maximum value is autodetected and also
+ *                      the default.
+ * @max_transfer_size:  The maximum transfer size supported, in bytes
+ *                       2047 to 65,535
+ *                      Actual maximum value is autodetected and also
+ *                      the default.
+ * @max_packet_count:   The maximum number of packets in a transfer
+ *                       15 to 511
+ *                      Actual maximum value is autodetected and also
+ *                      the default.
+ * @host_channels:      The number of host channel registers to use
+ *                       1 to 16
+ *                      Actual maximum value is autodetected and also
+ *                      the default.
+ * @dev_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO
+ *			     in device mode when dynamic FIFO sizing is enabled
+ *			     16 to 32768
+ *			     Actual maximum value is autodetected and also
+ *			     the default.
+ * @i2c_enable:         Specifies whether to use the I2Cinterface for a full
+ *                      speed PHY. This parameter is only applicable if phy_type
+ *                      is FS.
+ *                       0 - No (default)
+ *                       1 - Yes
+ * @acg_enable:		For enabling Active Clock Gating in the controller
+ *                       0 - Disable
+ *                       1 - Enable
+ * @lpm_mode:		For enabling Link Power Management in the controller
+ *                       0 - Disable
+ *                       1 - Enable
+ * @rx_fifo_size:	Number of 4-byte words in the  Rx FIFO when dynamic
+ *			FIFO sizing is enabled 16 to 32768
+ *			Actual maximum value is autodetected and also
+ *			the default.
+ * @service_interval_mode: For enabling service interval based scheduling in the
+ *                         controller.
+ *                           0 - Disable
+ *                           1 - Enable
+ */
+struct dwc2_hw_params {
+	unsigned op_mode:3;
+	unsigned arch:2;
+	unsigned dma_desc_enable:1;
+	unsigned enable_dynamic_fifo:1;
+	unsigned en_multiple_tx_fifo:1;
+	unsigned rx_fifo_size:16;
+	unsigned host_nperio_tx_fifo_size:16;
+	unsigned dev_nperio_tx_fifo_size:16;
+	unsigned host_perio_tx_fifo_size:16;
+	unsigned nperio_tx_q_depth:3;
+	unsigned host_perio_tx_q_depth:3;
+	unsigned dev_token_q_depth:5;
+	unsigned max_transfer_size:26;
+	unsigned max_packet_count:11;
+	unsigned host_channels:5;
+	unsigned hs_phy_type:2;
+	unsigned fs_phy_type:2;
+	unsigned i2c_enable:1;
+	unsigned acg_enable:1;
+	unsigned num_dev_ep:4;
+	unsigned num_dev_in_eps : 4;
+	unsigned num_dev_perio_in_ep:4;
+	unsigned total_fifo_size:16;
+	unsigned power_optimized:1;
+	unsigned hibernation:1;
+	unsigned utmi_phy_data_width:2;
+	unsigned lpm_mode:1;
+	unsigned ipg_isoc_en:1;
+	unsigned service_interval_mode:1;
+	u32 snpsid;
+	u32 dev_ep_dirs;
+	u32 g_tx_fifo_size[MAX_EPS_CHANNELS];
+};
+
+/* Size of control and EP0 buffers */
+#define DWC2_CTRL_BUFF_SIZE 8
+
+/**
+ * struct dwc2_gregs_backup - Holds global registers state before
+ * entering partial power down
+ * @gotgctl:		Backup of GOTGCTL register
+ * @gintmsk:		Backup of GINTMSK register
+ * @gahbcfg:		Backup of GAHBCFG register
+ * @gusbcfg:		Backup of GUSBCFG register
+ * @grxfsiz:		Backup of GRXFSIZ register
+ * @gnptxfsiz:		Backup of GNPTXFSIZ register
+ * @gi2cctl:		Backup of GI2CCTL register
+ * @glpmcfg:		Backup of GLPMCFG register
+ * @gdfifocfg:		Backup of GDFIFOCFG register
+ * @pcgcctl:		Backup of PCGCCTL register
+ * @pcgcctl1:		Backup of PCGCCTL1 register
+ * @dtxfsiz:		Backup of DTXFSIZ registers for each endpoint
+ * @gpwrdn:		Backup of GPWRDN register
+ * @valid:		True if registers values backuped.
+ */
+struct dwc2_gregs_backup {
+	u32 gotgctl;
+	u32 gintmsk;
+	u32 gahbcfg;
+	u32 gusbcfg;
+	u32 grxfsiz;
+	u32 gnptxfsiz;
+	u32 gi2cctl;
+	u32 glpmcfg;
+	u32 pcgcctl;
+	u32 pcgcctl1;
+	u32 gdfifocfg;
+	u32 gpwrdn;
+	bool valid;
+};
+
+/**
+ * struct dwc2_dregs_backup - Holds device registers state before
+ * entering partial power down
+ * @dcfg:		Backup of DCFG register
+ * @dctl:		Backup of DCTL register
+ * @daintmsk:		Backup of DAINTMSK register
+ * @diepmsk:		Backup of DIEPMSK register
+ * @doepmsk:		Backup of DOEPMSK register
+ * @diepctl:		Backup of DIEPCTL register
+ * @dieptsiz:		Backup of DIEPTSIZ register
+ * @diepdma:		Backup of DIEPDMA register
+ * @doepctl:		Backup of DOEPCTL register
+ * @doeptsiz:		Backup of DOEPTSIZ register
+ * @doepdma:		Backup of DOEPDMA register
+ * @dtxfsiz:		Backup of DTXFSIZ registers for each endpoint
+ * @valid:      True if registers values backuped.
+ */
+struct dwc2_dregs_backup {
+	u32 dcfg;
+	u32 dctl;
+	u32 daintmsk;
+	u32 diepmsk;
+	u32 doepmsk;
+	u32 diepctl[MAX_EPS_CHANNELS];
+	u32 dieptsiz[MAX_EPS_CHANNELS];
+	u32 diepdma[MAX_EPS_CHANNELS];
+	u32 doepctl[MAX_EPS_CHANNELS];
+	u32 doeptsiz[MAX_EPS_CHANNELS];
+	u32 doepdma[MAX_EPS_CHANNELS];
+	u32 dtxfsiz[MAX_EPS_CHANNELS];
+	bool valid;
+};
+
+/**
+ * struct dwc2_hregs_backup - Holds host registers state before
+ * entering partial power down
+ * @hcfg:		Backup of HCFG register
+ * @haintmsk:		Backup of HAINTMSK register
+ * @hcintmsk:		Backup of HCINTMSK register
+ * @hprt0:		Backup of HPTR0 register
+ * @hfir:		Backup of HFIR register
+ * @hptxfsiz:		Backup of HPTXFSIZ register
+ * @valid:      True if registers values backuped.
+ */
+struct dwc2_hregs_backup {
+	u32 hcfg;
+	u32 haintmsk;
+	u32 hcintmsk[MAX_EPS_CHANNELS];
+	u32 hprt0;
+	u32 hfir;
+	u32 hptxfsiz;
+	bool valid;
+};
+
+/*
+ * Constants related to high speed periodic scheduling
+ *
+ * We have a periodic schedule that is DWC2_HS_SCHEDULE_UFRAMES long.  From a
+ * reservation point of view it's assumed that the schedule goes right back to
+ * the beginning after the end of the schedule.
+ *
+ * What does that mean for scheduling things with a long interval?  It means
+ * we'll reserve time for them in every possible microframe that they could
+ * ever be scheduled in.  ...but we'll still only actually schedule them as
+ * often as they were requested.
+ *
+ * We keep our schedule in a "bitmap" structure.  This simplifies having
+ * to keep track of and merge intervals: we just let the bitmap code do most
+ * of the heavy lifting.  In a way scheduling is much like memory allocation.
+ *
+ * We schedule 100us per uframe or 80% of 125us (the maximum amount you're
+ * supposed to schedule for periodic transfers).  That's according to spec.
+ *
+ * Note that though we only schedule 80% of each microframe, the bitmap that we
+ * keep the schedule in is tightly packed (AKA it doesn't have 100us worth of
+ * space for each uFrame).
+ *
+ * Requirements:
+ * - DWC2_HS_SCHEDULE_UFRAMES must even divide 0x4000 (HFNUM_MAX_FRNUM + 1)
+ * - DWC2_HS_SCHEDULE_UFRAMES must be 8 times DWC2_LS_SCHEDULE_FRAMES (probably
+ *   could be any multiple of 8 times DWC2_LS_SCHEDULE_FRAMES, but there might
+ *   be bugs).  The 8 comes from the USB spec: number of microframes per frame.
+ */
+#define DWC2_US_PER_UFRAME		125
+#define DWC2_HS_PERIODIC_US_PER_UFRAME	100
+
+#define DWC2_HS_SCHEDULE_UFRAMES	8
+#define DWC2_HS_SCHEDULE_US		(DWC2_HS_SCHEDULE_UFRAMES * \
+					 DWC2_HS_PERIODIC_US_PER_UFRAME)
+
+/*
+ * Constants related to low speed scheduling
+ *
+ * For high speed we schedule every 1us.  For low speed that's a bit overkill,
+ * so we make up a unit called a "slice" that's worth 25us.  There are 40
+ * slices in a full frame and we can schedule 36 of those (90%) for periodic
+ * transfers.
+ *
+ * Our low speed schedule can be as short as 1 frame or could be longer.  When
+ * we only schedule 1 frame it means that we'll need to reserve a time every
+ * frame even for things that only transfer very rarely, so something that runs
+ * every 2048 frames will get time reserved in every frame.  Our low speed
+ * schedule can be longer and we'll be able to handle more overlap, but that
+ * will come at increased memory cost and increased time to schedule.
+ *
+ * Note: one other advantage of a short low speed schedule is that if we mess
+ * up and miss scheduling we can jump in and use any of the slots that we
+ * happened to reserve.
+ *
+ * With 25 us per slice and 1 frame in the schedule, we only need 4 bytes for
+ * the schedule.  There will be one schedule per TT.
+ *
+ * Requirements:
+ * - DWC2_US_PER_SLICE must evenly divide DWC2_LS_PERIODIC_US_PER_FRAME.
+ */
+#define DWC2_US_PER_SLICE	25
+#define DWC2_SLICES_PER_UFRAME	(DWC2_US_PER_UFRAME / DWC2_US_PER_SLICE)
+
+#define DWC2_ROUND_US_TO_SLICE(us) \
+				(DIV_ROUND_UP((us), DWC2_US_PER_SLICE) * \
+				 DWC2_US_PER_SLICE)
+
+#define DWC2_LS_PERIODIC_US_PER_FRAME \
+				900
+#define DWC2_LS_PERIODIC_SLICES_PER_FRAME \
+				(DWC2_LS_PERIODIC_US_PER_FRAME / \
+				 DWC2_US_PER_SLICE)
+
+#define DWC2_LS_SCHEDULE_FRAMES	1
+#define DWC2_LS_SCHEDULE_SLICES	(DWC2_LS_SCHEDULE_FRAMES * \
+				 DWC2_LS_PERIODIC_SLICES_PER_FRAME)
+
+/**
+ * struct dwc2_hsotg - Holds the state of the driver, including the non-periodic
+ * and periodic schedules
+ *
+ * These are common for both host and peripheral modes:
+ *
+ * @dev:                The struct device pointer
+ * @regs:		Pointer to controller regs
+ * @hw_params:          Parameters that were autodetected from the
+ *                      hardware registers
+ * @params:	Parameters that define how the core should be configured
+ * @op_state:           The operational State, during transitions (a_host=>
+ *                      a_peripheral and b_device=>b_host) this may not match
+ *                      the core, but allows the software to determine
+ *                      transitions
+ * @dr_mode:            Requested mode of operation, one of following:
+ *                      - USB_DR_MODE_PERIPHERAL
+ *                      - USB_DR_MODE_HOST
+ *                      - USB_DR_MODE_OTG
+ * @role_sw:		usb_role_switch handle
+ * @role_sw_default_mode: default operation mode of controller while usb role
+ *			is USB_ROLE_NONE
+ * @hcd_enabled:	Host mode sub-driver initialization indicator.
+ * @gadget_enabled:	Peripheral mode sub-driver initialization indicator.
+ * @ll_hw_enabled:	Status of low-level hardware resources.
+ * @hibernated:		True if core is hibernated
+ * @in_ppd:		True if core is partial power down mode.
+ * @bus_suspended:	True if bus is suspended
+ * @reset_phy_on_wake:	Quirk saying that we should assert PHY reset on a
+ *			remote wakeup.
+ * @phy_off_for_suspend: Status of whether we turned the PHY off at suspend.
+ * @need_phy_for_wake:	Quirk saying that we should keep the PHY on at
+ *			suspend if we need USB to wake us up.
+ * @frame_number:       Frame number read from the core. For both device
+ *			and host modes. The value ranges are from 0
+ *			to HFNUM_MAX_FRNUM.
+ * @phy:                The otg phy transceiver structure for phy control.
+ * @uphy:               The otg phy transceiver structure for old USB phy
+ *                      control.
+ * @plat:               The platform specific configuration data. This can be
+ *                      removed once all SoCs support usb transceiver.
+ * @supplies:           Definition of USB power supplies
+ * @vbus_supply:        Regulator supplying vbus.
+ * @usb33d:		Optional 3.3v regulator used on some stm32 devices to
+ *			supply ID and VBUS detection hardware.
+ * @lock:		Spinlock that protects all the driver data structures
+ * @priv:		Stores a pointer to the struct usb_hcd
+ * @queuing_high_bandwidth: True if multiple packets of a high-bandwidth
+ *                      transfer are in process of being queued
+ * @srp_success:        Stores status of SRP request in the case of a FS PHY
+ *                      with an I2C interface
+ * @wq_otg:             Workqueue object used for handling of some interrupts
+ * @wf_otg:             Work object for handling Connector ID Status Change
+ *                      interrupt
+ * @wkp_timer:          Timer object for handling Wakeup Detected interrupt
+ * @lx_state:           Lx state of connected device
+ * @gr_backup: Backup of global registers during suspend
+ * @dr_backup: Backup of device registers during suspend
+ * @hr_backup: Backup of host registers during suspend
+ * @needs_byte_swap:		Specifies whether the opposite endianness.
+ *
+ * These are for host mode:
+ *
+ * @flags:              Flags for handling root port state changes
+ * @flags.d32:          Contain all root port flags
+ * @flags.b:            Separate root port flags from each other
+ * @flags.b.port_connect_status_change: True if root port connect status
+ *                      changed
+ * @flags.b.port_connect_status: True if device connected to root port
+ * @flags.b.port_reset_change: True if root port reset status changed
+ * @flags.b.port_enable_change: True if root port enable status changed
+ * @flags.b.port_suspend_change: True if root port suspend status changed
+ * @flags.b.port_over_current_change: True if root port over current state
+ *                       changed.
+ * @flags.b.port_l1_change: True if root port l1 status changed
+ * @flags.b.reserved:   Reserved bits of root port register
+ * @non_periodic_sched_inactive: Inactive QHs in the non-periodic schedule.
+ *                      Transfers associated with these QHs are not currently
+ *                      assigned to a host channel.
+ * @non_periodic_sched_active: Active QHs in the non-periodic schedule.
+ *                      Transfers associated with these QHs are currently
+ *                      assigned to a host channel.
+ * @non_periodic_qh_ptr: Pointer to next QH to process in the active
+ *                      non-periodic schedule
+ * @non_periodic_sched_waiting: Waiting QHs in the non-periodic schedule.
+ *                      Transfers associated with these QHs are not currently
+ *                      assigned to a host channel.
+ * @periodic_sched_inactive: Inactive QHs in the periodic schedule. This is a
+ *                      list of QHs for periodic transfers that are _not_
+ *                      scheduled for the next frame. Each QH in the list has an
+ *                      interval counter that determines when it needs to be
+ *                      scheduled for execution. This scheduling mechanism
+ *                      allows only a simple calculation for periodic bandwidth
+ *                      used (i.e. must assume that all periodic transfers may
+ *                      need to execute in the same frame). However, it greatly
+ *                      simplifies scheduling and should be sufficient for the
+ *                      vast majority of OTG hosts, which need to connect to a
+ *                      small number of peripherals at one time. Items move from
+ *                      this list to periodic_sched_ready when the QH interval
+ *                      counter is 0 at SOF.
+ * @periodic_sched_ready:  List of periodic QHs that are ready for execution in
+ *                      the next frame, but have not yet been assigned to host
+ *                      channels. Items move from this list to
+ *                      periodic_sched_assigned as host channels become
+ *                      available during the current frame.
+ * @periodic_sched_assigned: List of periodic QHs to be executed in the next
+ *                      frame that are assigned to host channels. Items move
+ *                      from this list to periodic_sched_queued as the
+ *                      transactions for the QH are queued to the DWC_otg
+ *                      controller.
+ * @periodic_sched_queued: List of periodic QHs that have been queued for
+ *                      execution. Items move from this list to either
+ *                      periodic_sched_inactive or periodic_sched_ready when the
+ *                      channel associated with the transfer is released. If the
+ *                      interval for the QH is 1, the item moves to
+ *                      periodic_sched_ready because it must be rescheduled for
+ *                      the next frame. Otherwise, the item moves to
+ *                      periodic_sched_inactive.
+ * @split_order:        List keeping track of channels doing splits, in order.
+ * @periodic_usecs:     Total bandwidth claimed so far for periodic transfers.
+ *                      This value is in microseconds per (micro)frame. The
+ *                      assumption is that all periodic transfers may occur in
+ *                      the same (micro)frame.
+ * @hs_periodic_bitmap: Bitmap used by the microframe scheduler any time the
+ *                      host is in high speed mode; low speed schedules are
+ *                      stored elsewhere since we need one per TT.
+ * @periodic_qh_count:  Count of periodic QHs, if using several eps. Used for
+ *                      SOF enable/disable.
+ * @free_hc_list:       Free host channels in the controller. This is a list of
+ *                      struct dwc2_host_chan items.
+ * @periodic_channels:  Number of host channels assigned to periodic transfers.
+ *                      Currently assuming that there is a dedicated host
+ *                      channel for each periodic transaction and at least one
+ *                      host channel is available for non-periodic transactions.
+ * @non_periodic_channels: Number of host channels assigned to non-periodic
+ *                      transfers
+ * @available_host_channels: Number of host channels available for the
+ *			     microframe scheduler to use
+ * @hc_ptr_array:       Array of pointers to the host channel descriptors.
+ *                      Allows accessing a host channel descriptor given the
+ *                      host channel number. This is useful in interrupt
+ *                      handlers.
+ * @status_buf:         Buffer used for data received during the status phase of
+ *                      a control transfer.
+ * @status_buf_dma:     DMA address for status_buf
+ * @start_work:         Delayed work for handling host A-cable connection
+ * @reset_work:         Delayed work for handling a port reset
+ * @phy_reset_work:     Work structure for doing a PHY reset
+ * @otg_port:           OTG port number
+ * @frame_list:         Frame list
+ * @frame_list_dma:     Frame list DMA address
+ * @frame_list_sz:      Frame list size
+ * @desc_gen_cache:     Kmem cache for generic descriptors
+ * @desc_hsisoc_cache:  Kmem cache for hs isochronous descriptors
+ * @unaligned_cache:    Kmem cache for DMA mode to handle non-aligned buf
+ *
+ * These are for peripheral mode:
+ *
+ * @driver:             USB gadget driver
+ * @dedicated_fifos:    Set if the hardware has dedicated IN-EP fifos.
+ * @num_of_eps:         Number of available EPs (excluding EP0)
+ * @debug_root:         Root directrory for debugfs.
+ * @ep0_reply:          Request used for ep0 reply.
+ * @ep0_buff:           Buffer for EP0 reply data, if needed.
+ * @ctrl_buff:          Buffer for EP0 control requests.
+ * @ctrl_req:           Request for EP0 control packets.
+ * @ep0_state:          EP0 control transfers state
+ * @delayed_status:		true when gadget driver asks for delayed status
+ * @test_mode:          USB test mode requested by the host
+ * @remote_wakeup_allowed: True if device is allowed to wake-up host by
+ *                      remote-wakeup signalling
+ * @setup_desc_dma:	EP0 setup stage desc chain DMA address
+ * @setup_desc:		EP0 setup stage desc chain pointer
+ * @ctrl_in_desc_dma:	EP0 IN data phase desc chain DMA address
+ * @ctrl_in_desc:	EP0 IN data phase desc chain pointer
+ * @ctrl_out_desc_dma:	EP0 OUT data phase desc chain DMA address
+ * @ctrl_out_desc:	EP0 OUT data phase desc chain pointer
+ * @irq:		Interrupt request line number
+ * @clk:		Pointer to otg clock
+ * @reset:		Pointer to dwc2 reset controller
+ * @reset_ecc:          Pointer to dwc2 optional reset controller in Stratix10.
+ * @regset:		A pointer to a struct debugfs_regset32, which contains
+ *			a pointer to an array of register definitions, the
+ *			array size and the base address where the register bank
+ *			is to be found.
+ * @last_frame_num:	Number of last frame. Range from 0 to  32768
+ * @frame_num_array:    Used only  if CONFIG_USB_DWC2_TRACK_MISSED_SOFS is
+ *			defined, for missed SOFs tracking. Array holds that
+ *			frame numbers, which not equal to last_frame_num +1
+ * @last_frame_num_array:   Used only  if CONFIG_USB_DWC2_TRACK_MISSED_SOFS is
+ *			    defined, for missed SOFs tracking.
+ *			    If current_frame_number != last_frame_num+1
+ *			    then last_frame_num added to this array
+ * @frame_num_idx:	Actual size of frame_num_array and last_frame_num_array
+ * @dumped_frame_num_array:	1 - if missed SOFs frame numbers dumbed
+ *				0 - if missed SOFs frame numbers not dumbed
+ * @fifo_mem:			Total internal RAM for FIFOs (bytes)
+ * @fifo_map:		Each bit intend for concrete fifo. If that bit is set,
+ *			then that fifo is used
+ * @gadget:		Represents a usb gadget device
+ * @connected:		Used in slave mode. True if device connected with host
+ * @eps_in:		The IN endpoints being supplied to the gadget framework
+ * @eps_out:		The OUT endpoints being supplied to the gadget framework
+ * @new_connection:	Used in host mode. True if there are new connected
+ *			device
+ * @enabled:		Indicates the enabling state of controller
+ *
+ */
+struct dwc2_hsotg {
+	struct device *dev;
+	void __iomem *regs;
+	/** Params detected from hardware */
+	struct dwc2_hw_params hw_params;
+	/** Params to actually use */
+	struct dwc2_core_params params;
+	enum usb_otg_state op_state;
+	enum usb_dr_mode dr_mode;
+	struct usb_role_switch *role_sw;
+	enum usb_dr_mode role_sw_default_mode;
+	unsigned int hcd_enabled:1;
+	unsigned int gadget_enabled:1;
+	unsigned int ll_hw_enabled:1;
+	unsigned int hibernated:1;
+	unsigned int in_ppd:1;
+	bool bus_suspended;
+	unsigned int reset_phy_on_wake:1;
+	unsigned int need_phy_for_wake:1;
+	unsigned int phy_off_for_suspend:1;
+	u16 frame_number;
+
+	struct phy *phy;
+	struct usb_phy *uphy;
+	struct dwc2_hsotg_plat *plat;
+	struct regulator_bulk_data supplies[DWC2_NUM_SUPPLIES];
+	struct regulator *vbus_supply;
+	struct regulator *usb33d;
+
+	spinlock_t lock;
+	void *priv;
+	int     irq;
+	struct clk *clk;
+	struct reset_control *reset;
+	struct reset_control *reset_ecc;
+
+	unsigned int queuing_high_bandwidth:1;
+	unsigned int srp_success:1;
+
+	struct workqueue_struct *wq_otg;
+	struct work_struct wf_otg;
+	struct timer_list wkp_timer;
+	enum dwc2_lx_state lx_state;
+	struct dwc2_gregs_backup gr_backup;
+	struct dwc2_dregs_backup dr_backup;
+	struct dwc2_hregs_backup hr_backup;
+
+	struct dentry *debug_root;
+	struct debugfs_regset32 *regset;
+	bool needs_byte_swap;
+
+	/* DWC OTG HW Release versions */
+#define DWC2_CORE_REV_2_71a	0x4f54271a
+#define DWC2_CORE_REV_2_72a     0x4f54272a
+#define DWC2_CORE_REV_2_80a	0x4f54280a
+#define DWC2_CORE_REV_2_90a	0x4f54290a
+#define DWC2_CORE_REV_2_91a	0x4f54291a
+#define DWC2_CORE_REV_2_92a	0x4f54292a
+#define DWC2_CORE_REV_2_94a	0x4f54294a
+#define DWC2_CORE_REV_3_00a	0x4f54300a
+#define DWC2_CORE_REV_3_10a	0x4f54310a
+#define DWC2_CORE_REV_4_00a	0x4f54400a
+#define DWC2_CORE_REV_4_20a	0x4f54420a
+#define DWC2_FS_IOT_REV_1_00a	0x5531100a
+#define DWC2_HS_IOT_REV_1_00a	0x5532100a
+#define DWC2_CORE_REV_MASK	0x0000ffff
+
+	/* DWC OTG HW Core ID */
+#define DWC2_OTG_ID		0x4f540000
+#define DWC2_FS_IOT_ID		0x55310000
+#define DWC2_HS_IOT_ID		0x55320000
+
+#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+	union dwc2_hcd_internal_flags {
+		u32 d32;
+		struct {
+			unsigned port_connect_status_change:1;
+			unsigned port_connect_status:1;
+			unsigned port_reset_change:1;
+			unsigned port_enable_change:1;
+			unsigned port_suspend_change:1;
+			unsigned port_over_current_change:1;
+			unsigned port_l1_change:1;
+			unsigned reserved:25;
+		} b;
+	} flags;
+
+	struct list_head non_periodic_sched_inactive;
+	struct list_head non_periodic_sched_waiting;
+	struct list_head non_periodic_sched_active;
+	struct list_head *non_periodic_qh_ptr;
+	struct list_head periodic_sched_inactive;
+	struct list_head periodic_sched_ready;
+	struct list_head periodic_sched_assigned;
+	struct list_head periodic_sched_queued;
+	struct list_head split_order;
+	u16 periodic_usecs;
+	DECLARE_BITMAP(hs_periodic_bitmap, DWC2_HS_SCHEDULE_US);
+	u16 periodic_qh_count;
+	bool new_connection;
+
+	u16 last_frame_num;
+
+#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
+#define FRAME_NUM_ARRAY_SIZE 1000
+	u16 *frame_num_array;
+	u16 *last_frame_num_array;
+	int frame_num_idx;
+	int dumped_frame_num_array;
+#endif
+
+	struct list_head free_hc_list;
+	int periodic_channels;
+	int non_periodic_channels;
+	int available_host_channels;
+	struct dwc2_host_chan *hc_ptr_array[MAX_EPS_CHANNELS];
+	u8 *status_buf;
+	dma_addr_t status_buf_dma;
+#define DWC2_HCD_STATUS_BUF_SIZE 64
+
+	struct delayed_work start_work;
+	struct delayed_work reset_work;
+	struct work_struct phy_reset_work;
+	u8 otg_port;
+	u32 *frame_list;
+	dma_addr_t frame_list_dma;
+	u32 frame_list_sz;
+	struct kmem_cache *desc_gen_cache;
+	struct kmem_cache *desc_hsisoc_cache;
+	struct kmem_cache *unaligned_cache;
+#define DWC2_KMEM_UNALIGNED_BUF_SIZE 1024
+
+#endif /* CONFIG_USB_DWC2_HOST || CONFIG_USB_DWC2_DUAL_ROLE */
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+	/* Gadget structures */
+	struct usb_gadget_driver *driver;
+	int fifo_mem;
+	unsigned int dedicated_fifos:1;
+	unsigned char num_of_eps;
+	u32 fifo_map;
+
+	struct usb_request *ep0_reply;
+	struct usb_request *ctrl_req;
+	void *ep0_buff;
+	void *ctrl_buff;
+	enum dwc2_ep0_state ep0_state;
+	unsigned delayed_status : 1;
+	u8 test_mode;
+
+	dma_addr_t setup_desc_dma[2];
+	struct dwc2_dma_desc *setup_desc[2];
+	dma_addr_t ctrl_in_desc_dma;
+	struct dwc2_dma_desc *ctrl_in_desc;
+	dma_addr_t ctrl_out_desc_dma;
+	struct dwc2_dma_desc *ctrl_out_desc;
+
+	struct usb_gadget gadget;
+	unsigned int enabled:1;
+	unsigned int connected:1;
+	unsigned int remote_wakeup_allowed:1;
+	struct dwc2_hsotg_ep *eps_in[MAX_EPS_CHANNELS];
+	struct dwc2_hsotg_ep *eps_out[MAX_EPS_CHANNELS];
+#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
+};
+
+/* Normal architectures just use readl/write */
+static inline u32 dwc2_readl(struct dwc2_hsotg *hsotg, u32 offset)
+{
+	u32 val;
+
+	val = readl(hsotg->regs + offset);
+	if (hsotg->needs_byte_swap)
+		return swab32(val);
+	else
+		return val;
+}
+
+static inline void dwc2_writel(struct dwc2_hsotg *hsotg, u32 value, u32 offset)
+{
+	if (hsotg->needs_byte_swap)
+		writel(swab32(value), hsotg->regs + offset);
+	else
+		writel(value, hsotg->regs + offset);
+
+#ifdef DWC2_LOG_WRITES
+	pr_info("info:: wrote %08x to %p\n", value, hsotg->regs + offset);
+#endif
+}
+
+static inline void dwc2_readl_rep(struct dwc2_hsotg *hsotg, u32 offset,
+				  void *buffer, unsigned int count)
+{
+	if (count) {
+		u32 *buf = buffer;
+
+		do {
+			u32 x = dwc2_readl(hsotg, offset);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+
+static inline void dwc2_writel_rep(struct dwc2_hsotg *hsotg, u32 offset,
+				   const void *buffer, unsigned int count)
+{
+	if (count) {
+		const u32 *buf = buffer;
+
+		do {
+			dwc2_writel(hsotg, *buf++, offset);
+		} while (--count);
+	}
+}
+
+/* Reasons for halting a host channel */
+enum dwc2_halt_status {
+	DWC2_HC_XFER_NO_HALT_STATUS,
+	DWC2_HC_XFER_COMPLETE,
+	DWC2_HC_XFER_URB_COMPLETE,
+	DWC2_HC_XFER_ACK,
+	DWC2_HC_XFER_NAK,
+	DWC2_HC_XFER_NYET,
+	DWC2_HC_XFER_STALL,
+	DWC2_HC_XFER_XACT_ERR,
+	DWC2_HC_XFER_FRAME_OVERRUN,
+	DWC2_HC_XFER_BABBLE_ERR,
+	DWC2_HC_XFER_DATA_TOGGLE_ERR,
+	DWC2_HC_XFER_AHB_ERR,
+	DWC2_HC_XFER_PERIODIC_INCOMPLETE,
+	DWC2_HC_XFER_URB_DEQUEUE,
+};
+
+/* Core version information */
+static inline bool dwc2_is_iot(struct dwc2_hsotg *hsotg)
+{
+	return (hsotg->hw_params.snpsid & 0xfff00000) == 0x55300000;
+}
+
+static inline bool dwc2_is_fs_iot(struct dwc2_hsotg *hsotg)
+{
+	return (hsotg->hw_params.snpsid & 0xffff0000) == 0x55310000;
+}
+
+static inline bool dwc2_is_hs_iot(struct dwc2_hsotg *hsotg)
+{
+	return (hsotg->hw_params.snpsid & 0xffff0000) == 0x55320000;
+}
+
+/*
+ * The following functions support initialization of the core driver component
+ * and the DWC_otg controller
+ */
+int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait);
+int dwc2_enter_partial_power_down(struct dwc2_hsotg *hsotg);
+int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, int rem_wakeup,
+				 bool restore);
+int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg, int is_host);
+int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
+		int reset, int is_host);
+void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg);
+int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy);
+
+void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host);
+void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg);
+
+bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg);
+
+int dwc2_check_core_version(struct dwc2_hsotg *hsotg);
+
+/*
+ * Common core Functions.
+ * The following functions support managing the DWC_otg controller in either
+ * device or host mode.
+ */
+void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes);
+void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num);
+void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg);
+
+void dwc2_enable_global_interrupts(struct dwc2_hsotg *hcd);
+void dwc2_disable_global_interrupts(struct dwc2_hsotg *hcd);
+
+void dwc2_hib_restore_common(struct dwc2_hsotg *hsotg, int rem_wakeup,
+			     int is_host);
+int dwc2_backup_global_registers(struct dwc2_hsotg *hsotg);
+int dwc2_restore_global_registers(struct dwc2_hsotg *hsotg);
+
+void dwc2_enable_acg(struct dwc2_hsotg *hsotg);
+
+/* This function should be called on every hardware interrupt. */
+irqreturn_t dwc2_handle_common_intr(int irq, void *dev);
+
+/* The device ID match table */
+extern const struct of_device_id dwc2_of_match_table[];
+extern const struct acpi_device_id dwc2_acpi_match[];
+
+int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg);
+int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg);
+
+/* Common polling functions */
+int dwc2_hsotg_wait_bit_set(struct dwc2_hsotg *hs_otg, u32 reg, u32 bit,
+			    u32 timeout);
+int dwc2_hsotg_wait_bit_clear(struct dwc2_hsotg *hs_otg, u32 reg, u32 bit,
+			      u32 timeout);
+/* Parameters */
+int dwc2_get_hwparams(struct dwc2_hsotg *hsotg);
+int dwc2_init_params(struct dwc2_hsotg *hsotg);
+
+/*
+ * The following functions check the controller's OTG operation mode
+ * capability (GHWCFG2.OTG_MODE).
+ *
+ * These functions can be used before the internal hsotg->hw_params
+ * are read in and cached so they always read directly from the
+ * GHWCFG2 register.
+ */
+unsigned int dwc2_op_mode(struct dwc2_hsotg *hsotg);
+bool dwc2_hw_is_otg(struct dwc2_hsotg *hsotg);
+bool dwc2_hw_is_host(struct dwc2_hsotg *hsotg);
+bool dwc2_hw_is_device(struct dwc2_hsotg *hsotg);
+
+/*
+ * Returns the mode of operation, host or device
+ */
+static inline int dwc2_is_host_mode(struct dwc2_hsotg *hsotg)
+{
+	return (dwc2_readl(hsotg, GINTSTS) & GINTSTS_CURMODE_HOST) != 0;
+}
+
+static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg)
+{
+	return (dwc2_readl(hsotg, GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
+}
+
+int dwc2_drd_init(struct dwc2_hsotg *hsotg);
+void dwc2_drd_suspend(struct dwc2_hsotg *hsotg);
+void dwc2_drd_resume(struct dwc2_hsotg *hsotg);
+void dwc2_drd_exit(struct dwc2_hsotg *hsotg);
+
+/*
+ * Dump core registers and SPRAM
+ */
+void dwc2_dump_dev_registers(struct dwc2_hsotg *hsotg);
+void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg);
+void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg);
+
+/* Gadget defines */
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+int dwc2_hsotg_remove(struct dwc2_hsotg *hsotg);
+int dwc2_hsotg_suspend(struct dwc2_hsotg *dwc2);
+int dwc2_hsotg_resume(struct dwc2_hsotg *dwc2);
+int dwc2_gadget_init(struct dwc2_hsotg *hsotg);
+void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2,
+				       bool reset);
+void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg);
+void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg);
+void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2);
+int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode);
+#define dwc2_is_device_connected(hsotg) (hsotg->connected)
+#define dwc2_is_device_enabled(hsotg) (hsotg->enabled)
+int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg);
+int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg, int remote_wakeup);
+int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg);
+int dwc2_gadget_exit_hibernation(struct dwc2_hsotg *hsotg,
+				 int rem_wakeup, int reset);
+int dwc2_gadget_enter_partial_power_down(struct dwc2_hsotg *hsotg);
+int dwc2_gadget_exit_partial_power_down(struct dwc2_hsotg *hsotg,
+					bool restore);
+void dwc2_gadget_enter_clock_gating(struct dwc2_hsotg *hsotg);
+void dwc2_gadget_exit_clock_gating(struct dwc2_hsotg *hsotg,
+				   int rem_wakeup);
+int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg);
+int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg);
+int dwc2_hsotg_tx_fifo_average_depth(struct dwc2_hsotg *hsotg);
+void dwc2_gadget_init_lpm(struct dwc2_hsotg *hsotg);
+void dwc2_gadget_program_ref_clk(struct dwc2_hsotg *hsotg);
+static inline void dwc2_clear_fifo_map(struct dwc2_hsotg *hsotg)
+{ hsotg->fifo_map = 0; }
+#else
+static inline int dwc2_hsotg_remove(struct dwc2_hsotg *dwc2)
+{ return 0; }
+static inline int dwc2_hsotg_suspend(struct dwc2_hsotg *dwc2)
+{ return 0; }
+static inline int dwc2_hsotg_resume(struct dwc2_hsotg *dwc2)
+{ return 0; }
+static inline int dwc2_gadget_init(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2,
+						     bool reset) {}
+static inline void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2) {}
+static inline int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg,
+					   int testmode)
+{ return 0; }
+#define dwc2_is_device_connected(hsotg) (0)
+#define dwc2_is_device_enabled(hsotg) (0)
+static inline int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg,
+						int remote_wakeup)
+{ return 0; }
+static inline int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline int dwc2_gadget_exit_hibernation(struct dwc2_hsotg *hsotg,
+					       int rem_wakeup, int reset)
+{ return 0; }
+static inline int dwc2_gadget_enter_partial_power_down(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline int dwc2_gadget_exit_partial_power_down(struct dwc2_hsotg *hsotg,
+						      bool restore)
+{ return 0; }
+static inline void dwc2_gadget_enter_clock_gating(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_gadget_exit_clock_gating(struct dwc2_hsotg *hsotg,
+						 int rem_wakeup) {}
+static inline int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline int dwc2_hsotg_tx_fifo_average_depth(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline void dwc2_gadget_init_lpm(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_gadget_program_ref_clk(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_clear_fifo_map(struct dwc2_hsotg *hsotg) {}
+#endif
+
+#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg);
+int dwc2_hcd_get_future_frame_number(struct dwc2_hsotg *hsotg, int us);
+void dwc2_hcd_connect(struct dwc2_hsotg *hsotg);
+void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force);
+void dwc2_hcd_start(struct dwc2_hsotg *hsotg);
+int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup);
+int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex);
+int dwc2_port_resume(struct dwc2_hsotg *hsotg);
+int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg);
+int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg);
+int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg);
+int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg,
+			       int rem_wakeup, int reset);
+int dwc2_host_enter_partial_power_down(struct dwc2_hsotg *hsotg);
+int dwc2_host_exit_partial_power_down(struct dwc2_hsotg *hsotg,
+				      int rem_wakeup, bool restore);
+void dwc2_host_enter_clock_gating(struct dwc2_hsotg *hsotg);
+void dwc2_host_exit_clock_gating(struct dwc2_hsotg *hsotg, int rem_wakeup);
+bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2);
+static inline void dwc2_host_schedule_phy_reset(struct dwc2_hsotg *hsotg)
+{ schedule_work(&hsotg->phy_reset_work); }
+#else
+static inline int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline int dwc2_hcd_get_future_frame_number(struct dwc2_hsotg *hsotg,
+						   int us)
+{ return 0; }
+static inline void dwc2_hcd_connect(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force) {}
+static inline void dwc2_hcd_start(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) {}
+static inline int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup)
+{ return 0; }
+static inline int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex)
+{ return 0; }
+static inline int dwc2_port_resume(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline int dwc2_hcd_init(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg,
+					     int rem_wakeup, int reset)
+{ return 0; }
+static inline int dwc2_host_enter_partial_power_down(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline int dwc2_host_exit_partial_power_down(struct dwc2_hsotg *hsotg,
+						    int rem_wakeup, bool restore)
+{ return 0; }
+static inline void dwc2_host_enter_clock_gating(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_host_exit_clock_gating(struct dwc2_hsotg *hsotg,
+					       int rem_wakeup) {}
+static inline bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2)
+{ return false; }
+static inline void dwc2_host_schedule_phy_reset(struct dwc2_hsotg *hsotg) {}
+
+#endif
+
+#endif /* __DWC2_CORE_H__ */
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
new file mode 100644
index 000000000..158ede753
--- /dev/null
+++ b/drivers/usb/dwc2/core_intr.c
@@ -0,0 +1,865 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * core_intr.c - DesignWare HS OTG Controller common interrupt handling
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ */
+
+/*
+ * This file contains the common interrupt handlers
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+
+#include "core.h"
+#include "hcd.h"
+
+static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg)
+{
+	switch (hsotg->op_state) {
+	case OTG_STATE_A_HOST:
+		return "a_host";
+	case OTG_STATE_A_SUSPEND:
+		return "a_suspend";
+	case OTG_STATE_A_PERIPHERAL:
+		return "a_peripheral";
+	case OTG_STATE_B_PERIPHERAL:
+		return "b_peripheral";
+	case OTG_STATE_B_HOST:
+		return "b_host";
+	default:
+		return "unknown";
+	}
+}
+
+/**
+ * dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts.
+ * When the PRTINT interrupt fires, there are certain status bits in the Host
+ * Port that needs to get cleared.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 hprt0 = dwc2_readl(hsotg, HPRT0);
+
+	if (hprt0 & HPRT0_ENACHG) {
+		hprt0 &= ~HPRT0_ENA;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+	}
+}
+
+/**
+ * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg)
+{
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_MODEMIS, GINTSTS);
+
+	dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n",
+		 dwc2_is_host_mode(hsotg) ? "Host" : "Device");
+}
+
+/**
+ * dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG
+ * Interrupt Register (GOTGINT) to determine what interrupt has occurred.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 gotgint;
+	u32 gotgctl;
+	u32 gintmsk;
+
+	gotgint = dwc2_readl(hsotg, GOTGINT);
+	gotgctl = dwc2_readl(hsotg, GOTGCTL);
+	dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint,
+		dwc2_op_state_str(hsotg));
+
+	if (gotgint & GOTGINT_SES_END_DET) {
+		dev_dbg(hsotg->dev,
+			" ++OTG Interrupt: Session End Detected++ (%s)\n",
+			dwc2_op_state_str(hsotg));
+		gotgctl = dwc2_readl(hsotg, GOTGCTL);
+
+		if (dwc2_is_device_mode(hsotg))
+			dwc2_hsotg_disconnect(hsotg);
+
+		if (hsotg->op_state == OTG_STATE_B_HOST) {
+			hsotg->op_state = OTG_STATE_B_PERIPHERAL;
+		} else {
+			/*
+			 * If not B_HOST and Device HNP still set, HNP did
+			 * not succeed!
+			 */
+			if (gotgctl & GOTGCTL_DEVHNPEN) {
+				dev_dbg(hsotg->dev, "Session End Detected\n");
+				dev_err(hsotg->dev,
+					"Device Not Connected/Responding!\n");
+			}
+
+			/*
+			 * If Session End Detected the B-Cable has been
+			 * disconnected
+			 */
+			/* Reset to a clean state */
+			hsotg->lx_state = DWC2_L0;
+		}
+
+		gotgctl = dwc2_readl(hsotg, GOTGCTL);
+		gotgctl &= ~GOTGCTL_DEVHNPEN;
+		dwc2_writel(hsotg, gotgctl, GOTGCTL);
+	}
+
+	if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) {
+		dev_dbg(hsotg->dev,
+			" ++OTG Interrupt: Session Request Success Status Change++\n");
+		gotgctl = dwc2_readl(hsotg, GOTGCTL);
+		if (gotgctl & GOTGCTL_SESREQSCS) {
+			if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS &&
+			    hsotg->params.i2c_enable) {
+				hsotg->srp_success = 1;
+			} else {
+				/* Clear Session Request */
+				gotgctl = dwc2_readl(hsotg, GOTGCTL);
+				gotgctl &= ~GOTGCTL_SESREQ;
+				dwc2_writel(hsotg, gotgctl, GOTGCTL);
+			}
+		}
+	}
+
+	if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) {
+		/*
+		 * Print statements during the HNP interrupt handling
+		 * can cause it to fail
+		 */
+		gotgctl = dwc2_readl(hsotg, GOTGCTL);
+		/*
+		 * WA for 3.00a- HW is not setting cur_mode, even sometimes
+		 * this does not help
+		 */
+		if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a)
+			udelay(100);
+		if (gotgctl & GOTGCTL_HSTNEGSCS) {
+			if (dwc2_is_host_mode(hsotg)) {
+				hsotg->op_state = OTG_STATE_B_HOST;
+				/*
+				 * Need to disable SOF interrupt immediately.
+				 * When switching from device to host, the PCD
+				 * interrupt handler won't handle the interrupt
+				 * if host mode is already set. The HCD
+				 * interrupt handler won't get called if the
+				 * HCD state is HALT. This means that the
+				 * interrupt does not get handled and Linux
+				 * complains loudly.
+				 */
+				gintmsk = dwc2_readl(hsotg, GINTMSK);
+				gintmsk &= ~GINTSTS_SOF;
+				dwc2_writel(hsotg, gintmsk, GINTMSK);
+
+				/*
+				 * Call callback function with spin lock
+				 * released
+				 */
+				spin_unlock(&hsotg->lock);
+
+				/* Initialize the Core for Host mode */
+				dwc2_hcd_start(hsotg);
+				spin_lock(&hsotg->lock);
+				hsotg->op_state = OTG_STATE_B_HOST;
+			}
+		} else {
+			gotgctl = dwc2_readl(hsotg, GOTGCTL);
+			gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN);
+			dwc2_writel(hsotg, gotgctl, GOTGCTL);
+			dev_dbg(hsotg->dev, "HNP Failed\n");
+			dev_err(hsotg->dev,
+				"Device Not Connected/Responding\n");
+		}
+	}
+
+	if (gotgint & GOTGINT_HST_NEG_DET) {
+		/*
+		 * The disconnect interrupt is set at the same time as
+		 * Host Negotiation Detected. During the mode switch all
+		 * interrupts are cleared so the disconnect interrupt
+		 * handler will not get executed.
+		 */
+		dev_dbg(hsotg->dev,
+			" ++OTG Interrupt: Host Negotiation Detected++ (%s)\n",
+			(dwc2_is_host_mode(hsotg) ? "Host" : "Device"));
+		if (dwc2_is_device_mode(hsotg)) {
+			dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n",
+				hsotg->op_state);
+			spin_unlock(&hsotg->lock);
+			dwc2_hcd_disconnect(hsotg, false);
+			spin_lock(&hsotg->lock);
+			hsotg->op_state = OTG_STATE_A_PERIPHERAL;
+		} else {
+			/* Need to disable SOF interrupt immediately */
+			gintmsk = dwc2_readl(hsotg, GINTMSK);
+			gintmsk &= ~GINTSTS_SOF;
+			dwc2_writel(hsotg, gintmsk, GINTMSK);
+			spin_unlock(&hsotg->lock);
+			dwc2_hcd_start(hsotg);
+			spin_lock(&hsotg->lock);
+			hsotg->op_state = OTG_STATE_A_HOST;
+		}
+	}
+
+	if (gotgint & GOTGINT_A_DEV_TOUT_CHG)
+		dev_dbg(hsotg->dev,
+			" ++OTG Interrupt: A-Device Timeout Change++\n");
+	if (gotgint & GOTGINT_DBNCE_DONE)
+		dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n");
+
+	/* Clear GOTGINT */
+	dwc2_writel(hsotg, gotgint, GOTGINT);
+}
+
+/**
+ * dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status
+ * Change Interrupt
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a
+ * Device to Host Mode transition or a Host to Device Mode transition. This only
+ * occurs when the cable is connected/removed from the PHY connector.
+ */
+static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 gintmsk;
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_CONIDSTSCHNG, GINTSTS);
+
+	/* Need to disable SOF interrupt immediately */
+	gintmsk = dwc2_readl(hsotg, GINTMSK);
+	gintmsk &= ~GINTSTS_SOF;
+	dwc2_writel(hsotg, gintmsk, GINTMSK);
+
+	dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++  (%s)\n",
+		dwc2_is_host_mode(hsotg) ? "Host" : "Device");
+
+	/*
+	 * Need to schedule a work, as there are possible DELAY function calls.
+	 */
+	if (hsotg->wq_otg)
+		queue_work(hsotg->wq_otg, &hsotg->wf_otg);
+}
+
+/**
+ * dwc2_handle_session_req_intr() - This interrupt indicates that a device is
+ * initiating the Session Request Protocol to request the host to turn on bus
+ * power so a new session can begin
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * This handler responds by turning on bus power. If the DWC_otg controller is
+ * in low power mode, this handler brings the controller out of low power mode
+ * before turning on bus power.
+ */
+static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
+{
+	int ret;
+	u32 hprt0;
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_SESSREQINT, GINTSTS);
+
+	dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n",
+		hsotg->lx_state);
+
+	if (dwc2_is_device_mode(hsotg)) {
+		if (hsotg->lx_state == DWC2_L2) {
+			if (hsotg->in_ppd) {
+				ret = dwc2_exit_partial_power_down(hsotg, 0,
+								   true);
+				if (ret)
+					dev_err(hsotg->dev,
+						"exit power_down failed\n");
+			}
+
+			/* Exit gadget mode clock gating. */
+			if (hsotg->params.power_down ==
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
+				dwc2_gadget_exit_clock_gating(hsotg, 0);
+		}
+
+		/*
+		 * Report disconnect if there is any previous session
+		 * established
+		 */
+		dwc2_hsotg_disconnect(hsotg);
+	} else {
+		/* Turn on the port power bit. */
+		hprt0 = dwc2_read_hprt0(hsotg);
+		hprt0 |= HPRT0_PWR;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+		/* Connect hcd after port power is set. */
+		dwc2_hcd_connect(hsotg);
+	}
+}
+
+/**
+ * dwc2_wakeup_from_lpm_l1 - Exit the device from LPM L1 state
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ */
+static void dwc2_wakeup_from_lpm_l1(struct dwc2_hsotg *hsotg)
+{
+	u32 glpmcfg;
+	u32 i = 0;
+
+	if (hsotg->lx_state != DWC2_L1) {
+		dev_err(hsotg->dev, "Core isn't in DWC2_L1 state\n");
+		return;
+	}
+
+	glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+	if (dwc2_is_device_mode(hsotg)) {
+		dev_dbg(hsotg->dev, "Exit from L1 state\n");
+		glpmcfg &= ~GLPMCFG_ENBLSLPM;
+		glpmcfg &= ~GLPMCFG_HIRD_THRES_EN;
+		dwc2_writel(hsotg, glpmcfg, GLPMCFG);
+
+		do {
+			glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+
+			if (!(glpmcfg & (GLPMCFG_COREL1RES_MASK |
+					 GLPMCFG_L1RESUMEOK | GLPMCFG_SLPSTS)))
+				break;
+
+			udelay(1);
+		} while (++i < 200);
+
+		if (i == 200) {
+			dev_err(hsotg->dev, "Failed to exit L1 sleep state in 200us.\n");
+			return;
+		}
+		dwc2_gadget_init_lpm(hsotg);
+	} else {
+		/* TODO */
+		dev_err(hsotg->dev, "Host side LPM is not supported.\n");
+		return;
+	}
+
+	/* Change to L0 state */
+	hsotg->lx_state = DWC2_L0;
+
+	/* Inform gadget to exit from L1 */
+	call_gadget(hsotg, resume);
+}
+
+/*
+ * This interrupt indicates that the DWC_otg controller has detected a
+ * resume or remote wakeup sequence. If the DWC_otg controller is in
+ * low power mode, the handler must brings the controller out of low
+ * power mode. The controller automatically begins resume signaling.
+ * The handler schedules a time to stop resume signaling.
+ */
+static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
+{
+	int ret;
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_WKUPINT, GINTSTS);
+
+	dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n");
+	dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state);
+
+	if (hsotg->lx_state == DWC2_L1) {
+		dwc2_wakeup_from_lpm_l1(hsotg);
+		return;
+	}
+
+	if (dwc2_is_device_mode(hsotg)) {
+		dev_dbg(hsotg->dev, "DSTS=0x%0x\n",
+			dwc2_readl(hsotg, DSTS));
+		if (hsotg->lx_state == DWC2_L2) {
+			if (hsotg->in_ppd) {
+				u32 dctl = dwc2_readl(hsotg, DCTL);
+				/* Clear Remote Wakeup Signaling */
+				dctl &= ~DCTL_RMTWKUPSIG;
+				dwc2_writel(hsotg, dctl, DCTL);
+				ret = dwc2_exit_partial_power_down(hsotg, 1,
+								   true);
+				if (ret)
+					dev_err(hsotg->dev,
+						"exit partial_power_down failed\n");
+				call_gadget(hsotg, resume);
+			}
+
+			/* Exit gadget mode clock gating. */
+			if (hsotg->params.power_down ==
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
+				dwc2_gadget_exit_clock_gating(hsotg, 0);
+		} else {
+			/* Change to L0 state */
+			hsotg->lx_state = DWC2_L0;
+		}
+	} else {
+		if (hsotg->lx_state == DWC2_L2) {
+			if (hsotg->in_ppd) {
+				ret = dwc2_exit_partial_power_down(hsotg, 1,
+								   true);
+				if (ret)
+					dev_err(hsotg->dev,
+						"exit partial_power_down failed\n");
+			}
+
+			if (hsotg->params.power_down ==
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
+				dwc2_host_exit_clock_gating(hsotg, 1);
+
+			/*
+			 * If we've got this quirk then the PHY is stuck upon
+			 * wakeup.  Assert reset.  This will propagate out and
+			 * eventually we'll re-enumerate the device.  Not great
+			 * but the best we can do.  We can't call phy_reset()
+			 * at interrupt time but there's no hurry, so we'll
+			 * schedule it for later.
+			 */
+			if (hsotg->reset_phy_on_wake)
+				dwc2_host_schedule_phy_reset(hsotg);
+
+			mod_timer(&hsotg->wkp_timer,
+				  jiffies + msecs_to_jiffies(71));
+		} else {
+			/* Change to L0 state */
+			hsotg->lx_state = DWC2_L0;
+		}
+	}
+}
+
+/*
+ * This interrupt indicates that a device has been disconnected from the
+ * root port
+ */
+static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg)
+{
+	dwc2_writel(hsotg, GINTSTS_DISCONNINT, GINTSTS);
+
+	dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n",
+		dwc2_is_host_mode(hsotg) ? "Host" : "Device",
+		dwc2_op_state_str(hsotg));
+
+	if (hsotg->op_state == OTG_STATE_A_HOST)
+		dwc2_hcd_disconnect(hsotg, false);
+}
+
+/*
+ * This interrupt indicates that SUSPEND state has been detected on the USB.
+ *
+ * For HNP the USB Suspend interrupt signals the change from "a_peripheral"
+ * to "a_host".
+ *
+ * When power management is enabled the core will be put in low power mode.
+ */
+static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 dsts;
+	int ret;
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_USBSUSP, GINTSTS);
+
+	dev_dbg(hsotg->dev, "USB SUSPEND\n");
+
+	if (dwc2_is_device_mode(hsotg)) {
+		/*
+		 * Check the Device status register to determine if the Suspend
+		 * state is active
+		 */
+		dsts = dwc2_readl(hsotg, DSTS);
+		dev_dbg(hsotg->dev, "%s: DSTS=0x%0x\n", __func__, dsts);
+		dev_dbg(hsotg->dev,
+			"DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d HWCFG4.Hibernation=%d\n",
+			!!(dsts & DSTS_SUSPSTS),
+			hsotg->hw_params.power_optimized,
+			hsotg->hw_params.hibernation);
+
+		/* Ignore suspend request before enumeration */
+		if (!dwc2_is_device_connected(hsotg)) {
+			dev_dbg(hsotg->dev,
+				"ignore suspend request before enumeration\n");
+			return;
+		}
+		if (dsts & DSTS_SUSPSTS) {
+			switch (hsotg->params.power_down) {
+			case DWC2_POWER_DOWN_PARAM_PARTIAL:
+				ret = dwc2_enter_partial_power_down(hsotg);
+				if (ret)
+					dev_err(hsotg->dev,
+						"enter partial_power_down failed\n");
+
+				udelay(100);
+
+				/* Ask phy to be suspended */
+				if (!IS_ERR_OR_NULL(hsotg->uphy))
+					usb_phy_set_suspend(hsotg->uphy, true);
+				break;
+			case DWC2_POWER_DOWN_PARAM_HIBERNATION:
+				ret = dwc2_enter_hibernation(hsotg, 0);
+				if (ret)
+					dev_err(hsotg->dev,
+						"enter hibernation failed\n");
+				break;
+			case DWC2_POWER_DOWN_PARAM_NONE:
+				/*
+				 * If neither hibernation nor partial power down are supported,
+				 * clock gating is used to save power.
+				 */
+				if (!hsotg->params.no_clock_gating)
+					dwc2_gadget_enter_clock_gating(hsotg);
+			}
+
+			/*
+			 * Change to L2 (suspend) state before releasing
+			 * spinlock
+			 */
+			hsotg->lx_state = DWC2_L2;
+
+			/* Call gadget suspend callback */
+			call_gadget(hsotg, suspend);
+		}
+	} else {
+		if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) {
+			dev_dbg(hsotg->dev, "a_peripheral->a_host\n");
+
+			/* Change to L2 (suspend) state */
+			hsotg->lx_state = DWC2_L2;
+			/* Clear the a_peripheral flag, back to a_host */
+			spin_unlock(&hsotg->lock);
+			dwc2_hcd_start(hsotg);
+			spin_lock(&hsotg->lock);
+			hsotg->op_state = OTG_STATE_A_HOST;
+		}
+	}
+}
+
+/**
+ * dwc2_handle_lpm_intr - GINTSTS_LPMTRANRCVD Interrupt handler
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ */
+static void dwc2_handle_lpm_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 glpmcfg;
+	u32 pcgcctl;
+	u32 hird;
+	u32 hird_thres;
+	u32 hird_thres_en;
+	u32 enslpm;
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_LPMTRANRCVD, GINTSTS);
+
+	glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+
+	if (!(glpmcfg & GLPMCFG_LPMCAP)) {
+		dev_err(hsotg->dev, "Unexpected LPM interrupt\n");
+		return;
+	}
+
+	hird = (glpmcfg & GLPMCFG_HIRD_MASK) >> GLPMCFG_HIRD_SHIFT;
+	hird_thres = (glpmcfg & GLPMCFG_HIRD_THRES_MASK &
+			~GLPMCFG_HIRD_THRES_EN) >> GLPMCFG_HIRD_THRES_SHIFT;
+	hird_thres_en = glpmcfg & GLPMCFG_HIRD_THRES_EN;
+	enslpm = glpmcfg & GLPMCFG_ENBLSLPM;
+
+	if (dwc2_is_device_mode(hsotg)) {
+		dev_dbg(hsotg->dev, "HIRD_THRES_EN = %d\n", hird_thres_en);
+
+		if (hird_thres_en && hird >= hird_thres) {
+			dev_dbg(hsotg->dev, "L1 with utmi_l1_suspend_n\n");
+		} else if (enslpm) {
+			dev_dbg(hsotg->dev, "L1 with utmi_sleep_n\n");
+		} else {
+			dev_dbg(hsotg->dev, "Entering Sleep with L1 Gating\n");
+
+			pcgcctl = dwc2_readl(hsotg, PCGCTL);
+			pcgcctl |= PCGCTL_ENBL_SLEEP_GATING;
+			dwc2_writel(hsotg, pcgcctl, PCGCTL);
+		}
+		/**
+		 * Examine prt_sleep_sts after TL1TokenTetry period max (10 us)
+		 */
+		udelay(10);
+
+		glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+
+		if (glpmcfg & GLPMCFG_SLPSTS) {
+			/* Save the current state */
+			hsotg->lx_state = DWC2_L1;
+			dev_dbg(hsotg->dev,
+				"Core is in L1 sleep glpmcfg=%08x\n", glpmcfg);
+
+			/* Inform gadget that we are in L1 state */
+			call_gadget(hsotg, suspend);
+		}
+	}
+}
+
+#define GINTMSK_COMMON	(GINTSTS_WKUPINT | GINTSTS_SESSREQINT |		\
+			 GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT |	\
+			 GINTSTS_MODEMIS | GINTSTS_DISCONNINT |		\
+			 GINTSTS_USBSUSP | GINTSTS_PRTINT |		\
+			 GINTSTS_LPMTRANRCVD)
+
+/*
+ * This function returns the Core Interrupt register
+ */
+static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 gintsts;
+	u32 gintmsk;
+	u32 gahbcfg;
+	u32 gintmsk_common = GINTMSK_COMMON;
+
+	gintsts = dwc2_readl(hsotg, GINTSTS);
+	gintmsk = dwc2_readl(hsotg, GINTMSK);
+	gahbcfg = dwc2_readl(hsotg, GAHBCFG);
+
+	/* If any common interrupts set */
+	if (gintsts & gintmsk_common)
+		dev_dbg(hsotg->dev, "gintsts=%08x  gintmsk=%08x\n",
+			gintsts, gintmsk);
+
+	if (gahbcfg & GAHBCFG_GLBL_INTR_EN)
+		return gintsts & gintmsk & gintmsk_common;
+	else
+		return 0;
+}
+
+/**
+ * dwc_handle_gpwrdn_disc_det() - Handles the gpwrdn disconnect detect.
+ * Exits hibernation without restoring registers.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @gpwrdn: GPWRDN register
+ */
+static inline void dwc_handle_gpwrdn_disc_det(struct dwc2_hsotg *hsotg,
+					      u32 gpwrdn)
+{
+	u32 gpwrdn_tmp;
+
+	/* Switch-on voltage to the core */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp &= ~GPWRDN_PWRDNSWTCH;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+	udelay(5);
+
+	/* Reset core */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp &= ~GPWRDN_PWRDNRSTN;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+	udelay(5);
+
+	/* Disable Power Down Clamp */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp &= ~GPWRDN_PWRDNCLMP;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+	udelay(5);
+
+	/* Deassert reset core */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp |= GPWRDN_PWRDNRSTN;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+	udelay(5);
+
+	/* Disable PMU interrupt */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp &= ~GPWRDN_PMUINTSEL;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+
+	/* De-assert Wakeup Logic */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp &= ~GPWRDN_PMUACTV;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+
+	hsotg->hibernated = 0;
+	hsotg->bus_suspended = 0;
+
+	if (gpwrdn & GPWRDN_IDSTS) {
+		hsotg->op_state = OTG_STATE_B_PERIPHERAL;
+		dwc2_core_init(hsotg, false);
+		dwc2_enable_global_interrupts(hsotg);
+		dwc2_hsotg_core_init_disconnected(hsotg, false);
+		dwc2_hsotg_core_connect(hsotg);
+	} else {
+		hsotg->op_state = OTG_STATE_A_HOST;
+
+		/* Initialize the Core for Host mode */
+		dwc2_core_init(hsotg, false);
+		dwc2_enable_global_interrupts(hsotg);
+		dwc2_hcd_start(hsotg);
+	}
+}
+
+/*
+ * GPWRDN interrupt handler.
+ *
+ * The GPWRDN interrupts are those that occur in both Host and
+ * Device mode while core is in hibernated state.
+ */
+static int dwc2_handle_gpwrdn_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 gpwrdn;
+	int linestate;
+	int ret = 0;
+
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	/* clear all interrupt */
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	linestate = (gpwrdn & GPWRDN_LINESTATE_MASK) >> GPWRDN_LINESTATE_SHIFT;
+	dev_dbg(hsotg->dev,
+		"%s: dwc2_handle_gpwrdwn_intr called gpwrdn= %08x\n", __func__,
+		gpwrdn);
+
+	if ((gpwrdn & GPWRDN_DISCONN_DET) &&
+	    (gpwrdn & GPWRDN_DISCONN_DET_MSK) && !linestate) {
+		dev_dbg(hsotg->dev, "%s: GPWRDN_DISCONN_DET\n", __func__);
+		/*
+		 * Call disconnect detect function to exit from
+		 * hibernation
+		 */
+		dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn);
+	} else if ((gpwrdn & GPWRDN_LNSTSCHG) &&
+		   (gpwrdn & GPWRDN_LNSTSCHG_MSK) && linestate) {
+		dev_dbg(hsotg->dev, "%s: GPWRDN_LNSTSCHG\n", __func__);
+		if (hsotg->hw_params.hibernation &&
+		    hsotg->hibernated) {
+			if (gpwrdn & GPWRDN_IDSTS) {
+				ret = dwc2_exit_hibernation(hsotg, 0, 0, 0);
+				if (ret)
+					dev_err(hsotg->dev,
+						"exit hibernation failed.\n");
+				call_gadget(hsotg, resume);
+			} else {
+				ret = dwc2_exit_hibernation(hsotg, 1, 0, 1);
+				if (ret)
+					dev_err(hsotg->dev,
+						"exit hibernation failed.\n");
+			}
+		}
+	} else if ((gpwrdn & GPWRDN_RST_DET) &&
+		   (gpwrdn & GPWRDN_RST_DET_MSK)) {
+		dev_dbg(hsotg->dev, "%s: GPWRDN_RST_DET\n", __func__);
+		if (!linestate) {
+			ret = dwc2_exit_hibernation(hsotg, 0, 1, 0);
+			if (ret)
+				dev_err(hsotg->dev,
+					"exit hibernation failed.\n");
+		}
+	} else if ((gpwrdn & GPWRDN_STS_CHGINT) &&
+		   (gpwrdn & GPWRDN_STS_CHGINT_MSK)) {
+		dev_dbg(hsotg->dev, "%s: GPWRDN_STS_CHGINT\n", __func__);
+		/*
+		 * As GPWRDN_STS_CHGINT exit from hibernation flow is
+		 * the same as in GPWRDN_DISCONN_DET flow. Call
+		 * disconnect detect helper function to exit from
+		 * hibernation.
+		 */
+		dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn);
+	}
+
+	return ret;
+}
+
+/*
+ * Common interrupt handler
+ *
+ * The common interrupts are those that occur in both Host and Device mode.
+ * This handler handles the following interrupts:
+ * - Mode Mismatch Interrupt
+ * - OTG Interrupt
+ * - Connector ID Status Change Interrupt
+ * - Disconnect Interrupt
+ * - Session Request Interrupt
+ * - Resume / Remote Wakeup Detected Interrupt
+ * - Suspend Interrupt
+ */
+irqreturn_t dwc2_handle_common_intr(int irq, void *dev)
+{
+	struct dwc2_hsotg *hsotg = dev;
+	u32 gintsts;
+	irqreturn_t retval = IRQ_NONE;
+
+	spin_lock(&hsotg->lock);
+
+	if (!dwc2_is_controller_alive(hsotg)) {
+		dev_warn(hsotg->dev, "Controller is dead\n");
+		goto out;
+	}
+
+	/* Reading current frame number value in device or host modes. */
+	if (dwc2_is_device_mode(hsotg))
+		hsotg->frame_number = (dwc2_readl(hsotg, DSTS)
+				       & DSTS_SOFFN_MASK) >> DSTS_SOFFN_SHIFT;
+	else
+		hsotg->frame_number = (dwc2_readl(hsotg, HFNUM)
+				       & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT;
+
+	gintsts = dwc2_read_common_intr(hsotg);
+	if (gintsts & ~GINTSTS_PRTINT)
+		retval = IRQ_HANDLED;
+
+	/* In case of hibernated state gintsts must not work */
+	if (hsotg->hibernated) {
+		dwc2_handle_gpwrdn_intr(hsotg);
+		retval = IRQ_HANDLED;
+		goto out;
+	}
+
+	if (gintsts & GINTSTS_MODEMIS)
+		dwc2_handle_mode_mismatch_intr(hsotg);
+	if (gintsts & GINTSTS_OTGINT)
+		dwc2_handle_otg_intr(hsotg);
+	if (gintsts & GINTSTS_CONIDSTSCHNG)
+		dwc2_handle_conn_id_status_change_intr(hsotg);
+	if (gintsts & GINTSTS_DISCONNINT)
+		dwc2_handle_disconnect_intr(hsotg);
+	if (gintsts & GINTSTS_SESSREQINT)
+		dwc2_handle_session_req_intr(hsotg);
+	if (gintsts & GINTSTS_WKUPINT)
+		dwc2_handle_wakeup_detected_intr(hsotg);
+	if (gintsts & GINTSTS_USBSUSP)
+		dwc2_handle_usb_suspend_intr(hsotg);
+	if (gintsts & GINTSTS_LPMTRANRCVD)
+		dwc2_handle_lpm_intr(hsotg);
+
+	if (gintsts & GINTSTS_PRTINT) {
+		/*
+		 * The port interrupt occurs while in device mode with HPRT0
+		 * Port Enable/Disable
+		 */
+		if (dwc2_is_device_mode(hsotg)) {
+			dev_dbg(hsotg->dev,
+				" --Port interrupt received in Device mode--\n");
+			dwc2_handle_usb_port_intr(hsotg);
+			retval = IRQ_HANDLED;
+		}
+	}
+
+out:
+	spin_unlock(&hsotg->lock);
+	return retval;
+}
diff --git a/drivers/usb/dwc2/debug.h b/drivers/usb/dwc2/debug.h
new file mode 100644
index 000000000..47252c56d
--- /dev/null
+++ b/drivers/usb/dwc2/debug.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * debug.h - Designware USB2 DRD controller debug header
+ *
+ * Copyright (C) 2015 Intel Corporation
+ * Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
+ */
+
+#include "core.h"
+
+#ifdef CONFIG_DEBUG_FS
+int dwc2_debugfs_init(struct dwc2_hsotg *hsotg);
+void dwc2_debugfs_exit(struct dwc2_hsotg *hsotg);
+#else
+static inline int dwc2_debugfs_init(struct dwc2_hsotg *hsotg)
+{  return 0;  }
+static inline void dwc2_debugfs_exit(struct dwc2_hsotg *hsotg)
+{  }
+#endif
diff --git a/drivers/usb/dwc2/debugfs.c b/drivers/usb/dwc2/debugfs.c
new file mode 100644
index 000000000..1d72ece9c
--- /dev/null
+++ b/drivers/usb/dwc2/debugfs.c
@@ -0,0 +1,811 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * debugfs.c - Designware USB2 DRD controller debugfs
+ *
+ * Copyright (C) 2015 Intel Corporation
+ * Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
+ */
+
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+
+#include "core.h"
+#include "debug.h"
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+
+/**
+ * testmode_write() - change usb test mode state.
+ * @file: The  file to write to.
+ * @ubuf: The buffer where user wrote.
+ * @count: The ubuf size.
+ * @ppos: Unused parameter.
+ */
+static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t
+		count, loff_t *ppos)
+{
+	struct seq_file		*s = file->private_data;
+	struct dwc2_hsotg	*hsotg = s->private;
+	unsigned long		flags;
+	u32			testmode = 0;
+	char			buf[32];
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	if (!strncmp(buf, "test_j", 6))
+		testmode = USB_TEST_J;
+	else if (!strncmp(buf, "test_k", 6))
+		testmode = USB_TEST_K;
+	else if (!strncmp(buf, "test_se0_nak", 12))
+		testmode = USB_TEST_SE0_NAK;
+	else if (!strncmp(buf, "test_packet", 11))
+		testmode = USB_TEST_PACKET;
+	else if (!strncmp(buf, "test_force_enable", 17))
+		testmode = USB_TEST_FORCE_ENABLE;
+	else
+		testmode = 0;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	dwc2_hsotg_set_test_mode(hsotg, testmode);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	return count;
+}
+
+/**
+ * testmode_show() - debugfs: show usb test mode state
+ * @s: The seq file to write to.
+ * @unused: Unused parameter.
+ *
+ * This debugfs entry shows which usb test mode is currently enabled.
+ */
+static int testmode_show(struct seq_file *s, void *unused)
+{
+	struct dwc2_hsotg *hsotg = s->private;
+	unsigned long flags;
+	int dctl;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	dctl = dwc2_readl(hsotg, DCTL);
+	dctl &= DCTL_TSTCTL_MASK;
+	dctl >>= DCTL_TSTCTL_SHIFT;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	switch (dctl) {
+	case 0:
+		seq_puts(s, "no test\n");
+		break;
+	case USB_TEST_J:
+		seq_puts(s, "test_j\n");
+		break;
+	case USB_TEST_K:
+		seq_puts(s, "test_k\n");
+		break;
+	case USB_TEST_SE0_NAK:
+		seq_puts(s, "test_se0_nak\n");
+		break;
+	case USB_TEST_PACKET:
+		seq_puts(s, "test_packet\n");
+		break;
+	case USB_TEST_FORCE_ENABLE:
+		seq_puts(s, "test_force_enable\n");
+		break;
+	default:
+		seq_printf(s, "UNKNOWN %d\n", dctl);
+	}
+
+	return 0;
+}
+
+static int testmode_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, testmode_show, inode->i_private);
+}
+
+static const struct file_operations testmode_fops = {
+	.owner		= THIS_MODULE,
+	.open		= testmode_open,
+	.write		= testmode_write,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+/**
+ * state_show - debugfs: show overall driver and device state.
+ * @seq: The seq file to write to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows the overall state of the hardware and
+ * some general information about each of the endpoints available
+ * to the system.
+ */
+static int state_show(struct seq_file *seq, void *v)
+{
+	struct dwc2_hsotg *hsotg = seq->private;
+	int idx;
+
+	seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
+		   dwc2_readl(hsotg, DCFG),
+		 dwc2_readl(hsotg, DCTL),
+		 dwc2_readl(hsotg, DSTS));
+
+	seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
+		   dwc2_readl(hsotg, DIEPMSK), dwc2_readl(hsotg, DOEPMSK));
+
+	seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
+		   dwc2_readl(hsotg, GINTMSK),
+		   dwc2_readl(hsotg, GINTSTS));
+
+	seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
+		   dwc2_readl(hsotg, DAINTMSK),
+		   dwc2_readl(hsotg, DAINT));
+
+	seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
+		   dwc2_readl(hsotg, GNPTXSTS),
+		   dwc2_readl(hsotg, GRXSTSR));
+
+	seq_puts(seq, "\nEndpoint status:\n");
+
+	for (idx = 0; idx < hsotg->num_of_eps; idx++) {
+		u32 in, out;
+
+		in = dwc2_readl(hsotg, DIEPCTL(idx));
+		out = dwc2_readl(hsotg, DOEPCTL(idx));
+
+		seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
+			   idx, in, out);
+
+		in = dwc2_readl(hsotg, DIEPTSIZ(idx));
+		out = dwc2_readl(hsotg, DOEPTSIZ(idx));
+
+		seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
+			   in, out);
+
+		seq_puts(seq, "\n");
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(state);
+
+/**
+ * fifo_show - debugfs: show the fifo information
+ * @seq: The seq_file to write data to.
+ * @v: Unused parameter.
+ *
+ * Show the FIFO information for the overall fifo and all the
+ * periodic transmission FIFOs.
+ */
+static int fifo_show(struct seq_file *seq, void *v)
+{
+	struct dwc2_hsotg *hsotg = seq->private;
+	int fifo_count = dwc2_hsotg_tx_fifo_count(hsotg);
+	u32 val;
+	int idx;
+
+	seq_puts(seq, "Non-periodic FIFOs:\n");
+	seq_printf(seq, "RXFIFO: Size %d\n", dwc2_readl(hsotg, GRXFSIZ));
+
+	val = dwc2_readl(hsotg, GNPTXFSIZ);
+	seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
+		   val >> FIFOSIZE_DEPTH_SHIFT,
+		   val & FIFOSIZE_STARTADDR_MASK);
+
+	seq_puts(seq, "\nPeriodic TXFIFOs:\n");
+
+	for (idx = 1; idx <= fifo_count; idx++) {
+		val = dwc2_readl(hsotg, DPTXFSIZN(idx));
+
+		seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
+			   val >> FIFOSIZE_DEPTH_SHIFT,
+			   val & FIFOSIZE_STARTADDR_MASK);
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(fifo);
+
+static const char *decode_direction(int is_in)
+{
+	return is_in ? "in" : "out";
+}
+
+/**
+ * ep_show - debugfs: show the state of an endpoint.
+ * @seq: The seq_file to write data to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows the state of the given endpoint (one is
+ * registered for each available).
+ */
+static int ep_show(struct seq_file *seq, void *v)
+{
+	struct dwc2_hsotg_ep *ep = seq->private;
+	struct dwc2_hsotg *hsotg = ep->parent;
+	struct dwc2_hsotg_req *req;
+	int index = ep->index;
+	int show_limit = 15;
+	unsigned long flags;
+
+	seq_printf(seq, "Endpoint index %d, named %s,  dir %s:\n",
+		   ep->index, ep->ep.name, decode_direction(ep->dir_in));
+
+	/* first show the register state */
+
+	seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
+		   dwc2_readl(hsotg, DIEPCTL(index)),
+		   dwc2_readl(hsotg, DOEPCTL(index)));
+
+	seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
+		   dwc2_readl(hsotg, DIEPDMA(index)),
+		   dwc2_readl(hsotg, DOEPDMA(index)));
+
+	seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
+		   dwc2_readl(hsotg, DIEPINT(index)),
+		   dwc2_readl(hsotg, DOEPINT(index)));
+
+	seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
+		   dwc2_readl(hsotg, DIEPTSIZ(index)),
+		   dwc2_readl(hsotg, DOEPTSIZ(index)));
+
+	seq_puts(seq, "\n");
+	seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
+	seq_printf(seq, "total_data=%ld\n", ep->total_data);
+
+	seq_printf(seq, "request list (%p,%p):\n",
+		   ep->queue.next, ep->queue.prev);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (--show_limit < 0) {
+			seq_puts(seq, "not showing more requests...\n");
+			break;
+		}
+
+		seq_printf(seq, "%c req %p: %d bytes @%p, ",
+			   req == ep->req ? '*' : ' ',
+			   req, req->req.length, req->req.buf);
+		seq_printf(seq, "%d done, res %d\n",
+			   req->req.actual, req->req.status);
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(ep);
+
+/**
+ * dwc2_hsotg_create_debug - create debugfs directory and files
+ * @hsotg: The driver state
+ *
+ * Create the debugfs files to allow the user to get information
+ * about the state of the system. The directory name is created
+ * with the same name as the device itself, in case we end up
+ * with multiple blocks in future systems.
+ */
+static void dwc2_hsotg_create_debug(struct dwc2_hsotg *hsotg)
+{
+	struct dentry *root;
+	unsigned int epidx;
+
+	root = hsotg->debug_root;
+
+	/* create general state file */
+	debugfs_create_file("state", 0444, root, hsotg, &state_fops);
+	debugfs_create_file("testmode", 0644, root, hsotg, &testmode_fops);
+	debugfs_create_file("fifo", 0444, root, hsotg, &fifo_fops);
+
+	/* Create one file for each out endpoint */
+	for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) {
+		struct dwc2_hsotg_ep *ep;
+
+		ep = hsotg->eps_out[epidx];
+		if (ep)
+			debugfs_create_file(ep->name, 0444, root, ep, &ep_fops);
+	}
+	/* Create one file for each in endpoint. EP0 is handled with out eps */
+	for (epidx = 1; epidx < hsotg->num_of_eps; epidx++) {
+		struct dwc2_hsotg_ep *ep;
+
+		ep = hsotg->eps_in[epidx];
+		if (ep)
+			debugfs_create_file(ep->name, 0444, root, ep, &ep_fops);
+	}
+}
+#else
+static inline void dwc2_hsotg_create_debug(struct dwc2_hsotg *hsotg) {}
+#endif
+
+/* dwc2_hsotg_delete_debug is removed as cleanup in done in dwc2_debugfs_exit */
+
+#define dump_register(nm)	\
+{				\
+	.name	= #nm,		\
+	.offset	= nm,		\
+}
+
+static const struct debugfs_reg32 dwc2_regs[] = {
+	/*
+	 * Accessing registers like this can trigger mode mismatch interrupt.
+	 * However, according to dwc2 databook, the register access, in this
+	 * case, is completed on the processor bus but is ignored by the core
+	 * and does not affect its operation.
+	 */
+	dump_register(GOTGCTL),
+	dump_register(GOTGINT),
+	dump_register(GAHBCFG),
+	dump_register(GUSBCFG),
+	dump_register(GRSTCTL),
+	dump_register(GINTSTS),
+	dump_register(GINTMSK),
+	dump_register(GRXSTSR),
+	/* Omit GRXSTSP */
+	dump_register(GRXFSIZ),
+	dump_register(GNPTXFSIZ),
+	dump_register(GNPTXSTS),
+	dump_register(GI2CCTL),
+	dump_register(GPVNDCTL),
+	dump_register(GGPIO),
+	dump_register(GUID),
+	dump_register(GSNPSID),
+	dump_register(GHWCFG1),
+	dump_register(GHWCFG2),
+	dump_register(GHWCFG3),
+	dump_register(GHWCFG4),
+	dump_register(GLPMCFG),
+	dump_register(GPWRDN),
+	dump_register(GDFIFOCFG),
+	dump_register(ADPCTL),
+	dump_register(HPTXFSIZ),
+	dump_register(DPTXFSIZN(1)),
+	dump_register(DPTXFSIZN(2)),
+	dump_register(DPTXFSIZN(3)),
+	dump_register(DPTXFSIZN(4)),
+	dump_register(DPTXFSIZN(5)),
+	dump_register(DPTXFSIZN(6)),
+	dump_register(DPTXFSIZN(7)),
+	dump_register(DPTXFSIZN(8)),
+	dump_register(DPTXFSIZN(9)),
+	dump_register(DPTXFSIZN(10)),
+	dump_register(DPTXFSIZN(11)),
+	dump_register(DPTXFSIZN(12)),
+	dump_register(DPTXFSIZN(13)),
+	dump_register(DPTXFSIZN(14)),
+	dump_register(DPTXFSIZN(15)),
+	dump_register(DCFG),
+	dump_register(DCTL),
+	dump_register(DSTS),
+	dump_register(DIEPMSK),
+	dump_register(DOEPMSK),
+	dump_register(DAINT),
+	dump_register(DAINTMSK),
+	dump_register(DTKNQR1),
+	dump_register(DTKNQR2),
+	dump_register(DTKNQR3),
+	dump_register(DTKNQR4),
+	dump_register(DVBUSDIS),
+	dump_register(DVBUSPULSE),
+	dump_register(DIEPCTL(0)),
+	dump_register(DIEPCTL(1)),
+	dump_register(DIEPCTL(2)),
+	dump_register(DIEPCTL(3)),
+	dump_register(DIEPCTL(4)),
+	dump_register(DIEPCTL(5)),
+	dump_register(DIEPCTL(6)),
+	dump_register(DIEPCTL(7)),
+	dump_register(DIEPCTL(8)),
+	dump_register(DIEPCTL(9)),
+	dump_register(DIEPCTL(10)),
+	dump_register(DIEPCTL(11)),
+	dump_register(DIEPCTL(12)),
+	dump_register(DIEPCTL(13)),
+	dump_register(DIEPCTL(14)),
+	dump_register(DIEPCTL(15)),
+	dump_register(DOEPCTL(0)),
+	dump_register(DOEPCTL(1)),
+	dump_register(DOEPCTL(2)),
+	dump_register(DOEPCTL(3)),
+	dump_register(DOEPCTL(4)),
+	dump_register(DOEPCTL(5)),
+	dump_register(DOEPCTL(6)),
+	dump_register(DOEPCTL(7)),
+	dump_register(DOEPCTL(8)),
+	dump_register(DOEPCTL(9)),
+	dump_register(DOEPCTL(10)),
+	dump_register(DOEPCTL(11)),
+	dump_register(DOEPCTL(12)),
+	dump_register(DOEPCTL(13)),
+	dump_register(DOEPCTL(14)),
+	dump_register(DOEPCTL(15)),
+	dump_register(DIEPINT(0)),
+	dump_register(DIEPINT(1)),
+	dump_register(DIEPINT(2)),
+	dump_register(DIEPINT(3)),
+	dump_register(DIEPINT(4)),
+	dump_register(DIEPINT(5)),
+	dump_register(DIEPINT(6)),
+	dump_register(DIEPINT(7)),
+	dump_register(DIEPINT(8)),
+	dump_register(DIEPINT(9)),
+	dump_register(DIEPINT(10)),
+	dump_register(DIEPINT(11)),
+	dump_register(DIEPINT(12)),
+	dump_register(DIEPINT(13)),
+	dump_register(DIEPINT(14)),
+	dump_register(DIEPINT(15)),
+	dump_register(DOEPINT(0)),
+	dump_register(DOEPINT(1)),
+	dump_register(DOEPINT(2)),
+	dump_register(DOEPINT(3)),
+	dump_register(DOEPINT(4)),
+	dump_register(DOEPINT(5)),
+	dump_register(DOEPINT(6)),
+	dump_register(DOEPINT(7)),
+	dump_register(DOEPINT(8)),
+	dump_register(DOEPINT(9)),
+	dump_register(DOEPINT(10)),
+	dump_register(DOEPINT(11)),
+	dump_register(DOEPINT(12)),
+	dump_register(DOEPINT(13)),
+	dump_register(DOEPINT(14)),
+	dump_register(DOEPINT(15)),
+	dump_register(DIEPTSIZ(0)),
+	dump_register(DIEPTSIZ(1)),
+	dump_register(DIEPTSIZ(2)),
+	dump_register(DIEPTSIZ(3)),
+	dump_register(DIEPTSIZ(4)),
+	dump_register(DIEPTSIZ(5)),
+	dump_register(DIEPTSIZ(6)),
+	dump_register(DIEPTSIZ(7)),
+	dump_register(DIEPTSIZ(8)),
+	dump_register(DIEPTSIZ(9)),
+	dump_register(DIEPTSIZ(10)),
+	dump_register(DIEPTSIZ(11)),
+	dump_register(DIEPTSIZ(12)),
+	dump_register(DIEPTSIZ(13)),
+	dump_register(DIEPTSIZ(14)),
+	dump_register(DIEPTSIZ(15)),
+	dump_register(DOEPTSIZ(0)),
+	dump_register(DOEPTSIZ(1)),
+	dump_register(DOEPTSIZ(2)),
+	dump_register(DOEPTSIZ(3)),
+	dump_register(DOEPTSIZ(4)),
+	dump_register(DOEPTSIZ(5)),
+	dump_register(DOEPTSIZ(6)),
+	dump_register(DOEPTSIZ(7)),
+	dump_register(DOEPTSIZ(8)),
+	dump_register(DOEPTSIZ(9)),
+	dump_register(DOEPTSIZ(10)),
+	dump_register(DOEPTSIZ(11)),
+	dump_register(DOEPTSIZ(12)),
+	dump_register(DOEPTSIZ(13)),
+	dump_register(DOEPTSIZ(14)),
+	dump_register(DOEPTSIZ(15)),
+	dump_register(DIEPDMA(0)),
+	dump_register(DIEPDMA(1)),
+	dump_register(DIEPDMA(2)),
+	dump_register(DIEPDMA(3)),
+	dump_register(DIEPDMA(4)),
+	dump_register(DIEPDMA(5)),
+	dump_register(DIEPDMA(6)),
+	dump_register(DIEPDMA(7)),
+	dump_register(DIEPDMA(8)),
+	dump_register(DIEPDMA(9)),
+	dump_register(DIEPDMA(10)),
+	dump_register(DIEPDMA(11)),
+	dump_register(DIEPDMA(12)),
+	dump_register(DIEPDMA(13)),
+	dump_register(DIEPDMA(14)),
+	dump_register(DIEPDMA(15)),
+	dump_register(DOEPDMA(0)),
+	dump_register(DOEPDMA(1)),
+	dump_register(DOEPDMA(2)),
+	dump_register(DOEPDMA(3)),
+	dump_register(DOEPDMA(4)),
+	dump_register(DOEPDMA(5)),
+	dump_register(DOEPDMA(6)),
+	dump_register(DOEPDMA(7)),
+	dump_register(DOEPDMA(8)),
+	dump_register(DOEPDMA(9)),
+	dump_register(DOEPDMA(10)),
+	dump_register(DOEPDMA(11)),
+	dump_register(DOEPDMA(12)),
+	dump_register(DOEPDMA(13)),
+	dump_register(DOEPDMA(14)),
+	dump_register(DOEPDMA(15)),
+	dump_register(DTXFSTS(0)),
+	dump_register(DTXFSTS(1)),
+	dump_register(DTXFSTS(2)),
+	dump_register(DTXFSTS(3)),
+	dump_register(DTXFSTS(4)),
+	dump_register(DTXFSTS(5)),
+	dump_register(DTXFSTS(6)),
+	dump_register(DTXFSTS(7)),
+	dump_register(DTXFSTS(8)),
+	dump_register(DTXFSTS(9)),
+	dump_register(DTXFSTS(10)),
+	dump_register(DTXFSTS(11)),
+	dump_register(DTXFSTS(12)),
+	dump_register(DTXFSTS(13)),
+	dump_register(DTXFSTS(14)),
+	dump_register(DTXFSTS(15)),
+	dump_register(PCGCTL),
+	dump_register(HCFG),
+	dump_register(HFIR),
+	dump_register(HFNUM),
+	dump_register(HPTXSTS),
+	dump_register(HAINT),
+	dump_register(HAINTMSK),
+	dump_register(HFLBADDR),
+	dump_register(HPRT0),
+	dump_register(HCCHAR(0)),
+	dump_register(HCCHAR(1)),
+	dump_register(HCCHAR(2)),
+	dump_register(HCCHAR(3)),
+	dump_register(HCCHAR(4)),
+	dump_register(HCCHAR(5)),
+	dump_register(HCCHAR(6)),
+	dump_register(HCCHAR(7)),
+	dump_register(HCCHAR(8)),
+	dump_register(HCCHAR(9)),
+	dump_register(HCCHAR(10)),
+	dump_register(HCCHAR(11)),
+	dump_register(HCCHAR(12)),
+	dump_register(HCCHAR(13)),
+	dump_register(HCCHAR(14)),
+	dump_register(HCCHAR(15)),
+	dump_register(HCSPLT(0)),
+	dump_register(HCSPLT(1)),
+	dump_register(HCSPLT(2)),
+	dump_register(HCSPLT(3)),
+	dump_register(HCSPLT(4)),
+	dump_register(HCSPLT(5)),
+	dump_register(HCSPLT(6)),
+	dump_register(HCSPLT(7)),
+	dump_register(HCSPLT(8)),
+	dump_register(HCSPLT(9)),
+	dump_register(HCSPLT(10)),
+	dump_register(HCSPLT(11)),
+	dump_register(HCSPLT(12)),
+	dump_register(HCSPLT(13)),
+	dump_register(HCSPLT(14)),
+	dump_register(HCSPLT(15)),
+	dump_register(HCINT(0)),
+	dump_register(HCINT(1)),
+	dump_register(HCINT(2)),
+	dump_register(HCINT(3)),
+	dump_register(HCINT(4)),
+	dump_register(HCINT(5)),
+	dump_register(HCINT(6)),
+	dump_register(HCINT(7)),
+	dump_register(HCINT(8)),
+	dump_register(HCINT(9)),
+	dump_register(HCINT(10)),
+	dump_register(HCINT(11)),
+	dump_register(HCINT(12)),
+	dump_register(HCINT(13)),
+	dump_register(HCINT(14)),
+	dump_register(HCINT(15)),
+	dump_register(HCINTMSK(0)),
+	dump_register(HCINTMSK(1)),
+	dump_register(HCINTMSK(2)),
+	dump_register(HCINTMSK(3)),
+	dump_register(HCINTMSK(4)),
+	dump_register(HCINTMSK(5)),
+	dump_register(HCINTMSK(6)),
+	dump_register(HCINTMSK(7)),
+	dump_register(HCINTMSK(8)),
+	dump_register(HCINTMSK(9)),
+	dump_register(HCINTMSK(10)),
+	dump_register(HCINTMSK(11)),
+	dump_register(HCINTMSK(12)),
+	dump_register(HCINTMSK(13)),
+	dump_register(HCINTMSK(14)),
+	dump_register(HCINTMSK(15)),
+	dump_register(HCTSIZ(0)),
+	dump_register(HCTSIZ(1)),
+	dump_register(HCTSIZ(2)),
+	dump_register(HCTSIZ(3)),
+	dump_register(HCTSIZ(4)),
+	dump_register(HCTSIZ(5)),
+	dump_register(HCTSIZ(6)),
+	dump_register(HCTSIZ(7)),
+	dump_register(HCTSIZ(8)),
+	dump_register(HCTSIZ(9)),
+	dump_register(HCTSIZ(10)),
+	dump_register(HCTSIZ(11)),
+	dump_register(HCTSIZ(12)),
+	dump_register(HCTSIZ(13)),
+	dump_register(HCTSIZ(14)),
+	dump_register(HCTSIZ(15)),
+	dump_register(HCDMA(0)),
+	dump_register(HCDMA(1)),
+	dump_register(HCDMA(2)),
+	dump_register(HCDMA(3)),
+	dump_register(HCDMA(4)),
+	dump_register(HCDMA(5)),
+	dump_register(HCDMA(6)),
+	dump_register(HCDMA(7)),
+	dump_register(HCDMA(8)),
+	dump_register(HCDMA(9)),
+	dump_register(HCDMA(10)),
+	dump_register(HCDMA(11)),
+	dump_register(HCDMA(12)),
+	dump_register(HCDMA(13)),
+	dump_register(HCDMA(14)),
+	dump_register(HCDMA(15)),
+	dump_register(HCDMAB(0)),
+	dump_register(HCDMAB(1)),
+	dump_register(HCDMAB(2)),
+	dump_register(HCDMAB(3)),
+	dump_register(HCDMAB(4)),
+	dump_register(HCDMAB(5)),
+	dump_register(HCDMAB(6)),
+	dump_register(HCDMAB(7)),
+	dump_register(HCDMAB(8)),
+	dump_register(HCDMAB(9)),
+	dump_register(HCDMAB(10)),
+	dump_register(HCDMAB(11)),
+	dump_register(HCDMAB(12)),
+	dump_register(HCDMAB(13)),
+	dump_register(HCDMAB(14)),
+	dump_register(HCDMAB(15)),
+};
+
+#define print_param(_seq, _ptr, _param) \
+seq_printf((_seq), "%-30s: %d\n", #_param, (_ptr)->_param)
+
+#define print_param_hex(_seq, _ptr, _param) \
+seq_printf((_seq), "%-30s: 0x%x\n", #_param, (_ptr)->_param)
+
+static int params_show(struct seq_file *seq, void *v)
+{
+	struct dwc2_hsotg *hsotg = seq->private;
+	struct dwc2_core_params *p = &hsotg->params;
+	int i;
+
+	print_param(seq, p, otg_caps.hnp_support);
+	print_param(seq, p, otg_caps.srp_support);
+	print_param(seq, p, otg_caps.otg_rev);
+	print_param(seq, p, dma_desc_enable);
+	print_param(seq, p, dma_desc_fs_enable);
+	print_param(seq, p, speed);
+	print_param(seq, p, enable_dynamic_fifo);
+	print_param(seq, p, en_multiple_tx_fifo);
+	print_param(seq, p, host_rx_fifo_size);
+	print_param(seq, p, host_nperio_tx_fifo_size);
+	print_param(seq, p, host_perio_tx_fifo_size);
+	print_param(seq, p, max_transfer_size);
+	print_param(seq, p, max_packet_count);
+	print_param(seq, p, host_channels);
+	print_param(seq, p, phy_type);
+	print_param(seq, p, phy_utmi_width);
+	print_param(seq, p, phy_ulpi_ddr);
+	print_param(seq, p, phy_ulpi_ext_vbus);
+	print_param(seq, p, i2c_enable);
+	print_param(seq, p, ipg_isoc_en);
+	print_param(seq, p, ulpi_fs_ls);
+	print_param(seq, p, host_support_fs_ls_low_power);
+	print_param(seq, p, host_ls_low_power_phy_clk);
+	print_param(seq, p, activate_stm_fs_transceiver);
+	print_param(seq, p, activate_stm_id_vb_detection);
+	print_param(seq, p, ts_dline);
+	print_param(seq, p, reload_ctl);
+	print_param_hex(seq, p, ahbcfg);
+	print_param(seq, p, uframe_sched);
+	print_param(seq, p, external_id_pin_ctl);
+	print_param(seq, p, power_down);
+	print_param(seq, p, lpm);
+	print_param(seq, p, lpm_clock_gating);
+	print_param(seq, p, besl);
+	print_param(seq, p, hird_threshold_en);
+	print_param(seq, p, hird_threshold);
+	print_param(seq, p, service_interval);
+	print_param(seq, p, host_dma);
+	print_param(seq, p, g_dma);
+	print_param(seq, p, g_dma_desc);
+	print_param(seq, p, g_rx_fifo_size);
+	print_param(seq, p, g_np_tx_fifo_size);
+
+	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
+		char str[32];
+
+		snprintf(str, 32, "g_tx_fifo_size[%d]", i);
+		seq_printf(seq, "%-30s: %d\n", str, p->g_tx_fifo_size[i]);
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(params);
+
+static int hw_params_show(struct seq_file *seq, void *v)
+{
+	struct dwc2_hsotg *hsotg = seq->private;
+	struct dwc2_hw_params *hw = &hsotg->hw_params;
+
+	print_param(seq, hw, op_mode);
+	print_param(seq, hw, arch);
+	print_param(seq, hw, dma_desc_enable);
+	print_param(seq, hw, enable_dynamic_fifo);
+	print_param(seq, hw, en_multiple_tx_fifo);
+	print_param(seq, hw, rx_fifo_size);
+	print_param(seq, hw, host_nperio_tx_fifo_size);
+	print_param(seq, hw, dev_nperio_tx_fifo_size);
+	print_param(seq, hw, host_perio_tx_fifo_size);
+	print_param(seq, hw, nperio_tx_q_depth);
+	print_param(seq, hw, host_perio_tx_q_depth);
+	print_param(seq, hw, dev_token_q_depth);
+	print_param(seq, hw, max_transfer_size);
+	print_param(seq, hw, max_packet_count);
+	print_param(seq, hw, host_channels);
+	print_param(seq, hw, hs_phy_type);
+	print_param(seq, hw, fs_phy_type);
+	print_param(seq, hw, i2c_enable);
+	print_param(seq, hw, num_dev_ep);
+	print_param(seq, hw, num_dev_perio_in_ep);
+	print_param(seq, hw, total_fifo_size);
+	print_param(seq, hw, power_optimized);
+	print_param(seq, hw, utmi_phy_data_width);
+	print_param_hex(seq, hw, snpsid);
+	print_param_hex(seq, hw, dev_ep_dirs);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(hw_params);
+
+static int dr_mode_show(struct seq_file *seq, void *v)
+{
+	struct dwc2_hsotg *hsotg = seq->private;
+	const char *dr_mode = "";
+
+	device_property_read_string(hsotg->dev, "dr_mode", &dr_mode);
+	seq_printf(seq, "%s\n", dr_mode);
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(dr_mode);
+
+int dwc2_debugfs_init(struct dwc2_hsotg *hsotg)
+{
+	int			ret;
+	struct dentry		*root;
+
+	root = debugfs_create_dir(dev_name(hsotg->dev), usb_debug_root);
+	hsotg->debug_root = root;
+
+	debugfs_create_file("params", 0444, root, hsotg, &params_fops);
+	debugfs_create_file("hw_params", 0444, root, hsotg, &hw_params_fops);
+	debugfs_create_file("dr_mode", 0444, root, hsotg, &dr_mode_fops);
+
+	/* Add gadget debugfs nodes */
+	dwc2_hsotg_create_debug(hsotg);
+
+	hsotg->regset = devm_kzalloc(hsotg->dev, sizeof(*hsotg->regset),
+								GFP_KERNEL);
+	if (!hsotg->regset) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	hsotg->regset->regs = dwc2_regs;
+	hsotg->regset->nregs = ARRAY_SIZE(dwc2_regs);
+	hsotg->regset->base = hsotg->regs;
+
+	debugfs_create_regset32("regdump", 0444, root, hsotg->regset);
+
+	return 0;
+err:
+	debugfs_remove_recursive(hsotg->debug_root);
+	return ret;
+}
+
+void dwc2_debugfs_exit(struct dwc2_hsotg *hsotg)
+{
+	debugfs_remove_recursive(hsotg->debug_root);
+	hsotg->debug_root = NULL;
+}
diff --git a/drivers/usb/dwc2/drd.c b/drivers/usb/dwc2/drd.c
new file mode 100644
index 000000000..a8605b021
--- /dev/null
+++ b/drivers/usb/dwc2/drd.c
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * drd.c - DesignWare USB2 DRD Controller Dual-role support
+ *
+ * Copyright (C) 2020 STMicroelectronics
+ *
+ * Author(s): Amelie Delaunay <amelie.delaunay@st.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/platform_device.h>
+#include <linux/usb/role.h>
+#include "core.h"
+
+#define dwc2_ovr_gotgctl(gotgctl) \
+	((gotgctl) |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN | GOTGCTL_VBVALOEN | \
+	 GOTGCTL_DBNCE_FLTR_BYPASS)
+
+static void dwc2_ovr_init(struct dwc2_hsotg *hsotg)
+{
+	unsigned long flags;
+	u32 gotgctl;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	gotgctl = dwc2_readl(hsotg, GOTGCTL);
+	dwc2_ovr_gotgctl(gotgctl);
+	gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL);
+	if (hsotg->role_sw_default_mode == USB_DR_MODE_HOST)
+		gotgctl |= GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL;
+	else if (hsotg->role_sw_default_mode == USB_DR_MODE_PERIPHERAL)
+		gotgctl |= GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL;
+	dwc2_writel(hsotg, gotgctl, GOTGCTL);
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	dwc2_force_mode(hsotg, (hsotg->dr_mode == USB_DR_MODE_HOST) ||
+				(hsotg->role_sw_default_mode == USB_DR_MODE_HOST));
+}
+
+static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid)
+{
+	u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
+
+	/* Check if A-Session is already in the right state */
+	if ((valid && (gotgctl & GOTGCTL_ASESVLD)) ||
+	    (!valid && !(gotgctl & GOTGCTL_ASESVLD)))
+		return -EALREADY;
+
+	/* Always enable overrides to handle the resume case */
+	dwc2_ovr_gotgctl(gotgctl);
+
+	gotgctl &= ~GOTGCTL_BVALOVAL;
+	if (valid)
+		gotgctl |= GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL;
+	else
+		gotgctl &= ~(GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL);
+	dwc2_writel(hsotg, gotgctl, GOTGCTL);
+
+	return 0;
+}
+
+static int dwc2_ovr_bvalid(struct dwc2_hsotg *hsotg, bool valid)
+{
+	u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
+
+	/* Check if B-Session is already in the right state */
+	if ((valid && (gotgctl & GOTGCTL_BSESVLD)) ||
+	    (!valid && !(gotgctl & GOTGCTL_BSESVLD)))
+		return -EALREADY;
+
+	/* Always enable overrides to handle the resume case */
+	dwc2_ovr_gotgctl(gotgctl);
+
+	gotgctl &= ~GOTGCTL_AVALOVAL;
+	if (valid)
+		gotgctl |= GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL;
+	else
+		gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL);
+	dwc2_writel(hsotg, gotgctl, GOTGCTL);
+
+	return 0;
+}
+
+static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
+{
+	struct dwc2_hsotg *hsotg = usb_role_switch_get_drvdata(sw);
+	unsigned long flags;
+	int already = 0;
+
+	/* Skip session not in line with dr_mode */
+	if ((role == USB_ROLE_DEVICE && hsotg->dr_mode == USB_DR_MODE_HOST) ||
+	    (role == USB_ROLE_HOST && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
+		return -EINVAL;
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+	/* Skip session if core is in test mode */
+	if (role == USB_ROLE_NONE && hsotg->test_mode) {
+		dev_dbg(hsotg->dev, "Core is in test mode\n");
+		return -EBUSY;
+	}
+#endif
+
+	/*
+	 * In case of USB_DR_MODE_PERIPHERAL, clock is disabled at the end of
+	 * the probe and enabled on udc_start.
+	 * If role-switch set is called before the udc_start, we need to enable
+	 * the clock to read/write GOTGCTL and GUSBCFG registers to override
+	 * mode and sessions. It is the case if cable is plugged at boot.
+	 */
+	if (!hsotg->ll_hw_enabled && hsotg->clk) {
+		int ret = clk_prepare_enable(hsotg->clk);
+
+		if (ret)
+			return ret;
+	}
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	if (role == USB_ROLE_NONE) {
+		/* default operation mode when usb role is USB_ROLE_NONE */
+		if (hsotg->role_sw_default_mode == USB_DR_MODE_HOST)
+			role = USB_ROLE_HOST;
+		else if (hsotg->role_sw_default_mode == USB_DR_MODE_PERIPHERAL)
+			role = USB_ROLE_DEVICE;
+	}
+
+	if (role == USB_ROLE_HOST) {
+		already = dwc2_ovr_avalid(hsotg, true);
+	} else if (role == USB_ROLE_DEVICE) {
+		already = dwc2_ovr_bvalid(hsotg, true);
+		if (dwc2_is_device_enabled(hsotg)) {
+			/* This clear DCTL.SFTDISCON bit */
+			dwc2_hsotg_core_connect(hsotg);
+		}
+	} else {
+		if (dwc2_is_device_mode(hsotg)) {
+			if (!dwc2_ovr_bvalid(hsotg, false))
+				/* This set DCTL.SFTDISCON bit */
+				dwc2_hsotg_core_disconnect(hsotg);
+		} else {
+			dwc2_ovr_avalid(hsotg, false);
+		}
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	if (!already && hsotg->dr_mode == USB_DR_MODE_OTG)
+		/* This will raise a Connector ID Status Change Interrupt */
+		dwc2_force_mode(hsotg, role == USB_ROLE_HOST);
+
+	if (!hsotg->ll_hw_enabled && hsotg->clk)
+		clk_disable_unprepare(hsotg->clk);
+
+	dev_dbg(hsotg->dev, "%s-session valid\n",
+		role == USB_ROLE_NONE ? "No" :
+		role == USB_ROLE_HOST ? "A" : "B");
+
+	return 0;
+}
+
+int dwc2_drd_init(struct dwc2_hsotg *hsotg)
+{
+	struct usb_role_switch_desc role_sw_desc = {0};
+	struct usb_role_switch *role_sw;
+	int ret;
+
+	if (!device_property_read_bool(hsotg->dev, "usb-role-switch"))
+		return 0;
+
+	hsotg->role_sw_default_mode = usb_get_role_switch_default_mode(hsotg->dev);
+	role_sw_desc.driver_data = hsotg;
+	role_sw_desc.fwnode = dev_fwnode(hsotg->dev);
+	role_sw_desc.set = dwc2_drd_role_sw_set;
+	role_sw_desc.allow_userspace_control = true;
+
+	role_sw = usb_role_switch_register(hsotg->dev, &role_sw_desc);
+	if (IS_ERR(role_sw)) {
+		ret = PTR_ERR(role_sw);
+		dev_err(hsotg->dev,
+			"failed to register role switch: %d\n", ret);
+		return ret;
+	}
+
+	hsotg->role_sw = role_sw;
+
+	/* Enable override and initialize values */
+	dwc2_ovr_init(hsotg);
+
+	return 0;
+}
+
+void dwc2_drd_suspend(struct dwc2_hsotg *hsotg)
+{
+	u32 gintsts, gintmsk;
+
+	if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) {
+		gintmsk = dwc2_readl(hsotg, GINTMSK);
+		gintmsk &= ~GINTSTS_CONIDSTSCHNG;
+		dwc2_writel(hsotg, gintmsk, GINTMSK);
+		gintsts = dwc2_readl(hsotg, GINTSTS);
+		dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS);
+	}
+}
+
+void dwc2_drd_resume(struct dwc2_hsotg *hsotg)
+{
+	u32 gintsts, gintmsk;
+	enum usb_role role;
+
+	if (hsotg->role_sw) {
+		/* get last known role (as the get ops isn't implemented by this driver) */
+		role = usb_role_switch_get_role(hsotg->role_sw);
+
+		if (role == USB_ROLE_NONE) {
+			if (hsotg->role_sw_default_mode == USB_DR_MODE_HOST)
+				role = USB_ROLE_HOST;
+			else if (hsotg->role_sw_default_mode == USB_DR_MODE_PERIPHERAL)
+				role = USB_ROLE_DEVICE;
+		}
+
+		/* restore last role that may have been lost */
+		if (role == USB_ROLE_HOST)
+			dwc2_ovr_avalid(hsotg, true);
+		else if (role == USB_ROLE_DEVICE)
+			dwc2_ovr_bvalid(hsotg, true);
+
+		dwc2_force_mode(hsotg, role == USB_ROLE_HOST);
+
+		dev_dbg(hsotg->dev, "resuming %s-session valid\n",
+			role == USB_ROLE_NONE ? "No" :
+			role == USB_ROLE_HOST ? "A" : "B");
+	}
+
+	if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) {
+		gintsts = dwc2_readl(hsotg, GINTSTS);
+		dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS);
+		gintmsk = dwc2_readl(hsotg, GINTMSK);
+		gintmsk |= GINTSTS_CONIDSTSCHNG;
+		dwc2_writel(hsotg, gintmsk, GINTMSK);
+	}
+}
+
+void dwc2_drd_exit(struct dwc2_hsotg *hsotg)
+{
+	if (hsotg->role_sw)
+		usb_role_switch_unregister(hsotg->role_sw);
+}
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
new file mode 100644
index 000000000..8b15742d9
--- /dev/null
+++ b/drivers/usb/dwc2/gadget.c
@@ -0,0 +1,5677 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG driver
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/mutex.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of_platform.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/composite.h>
+
+
+#include "core.h"
+#include "hw.h"
+
+/* conversion functions */
+static inline struct dwc2_hsotg_req *our_req(struct usb_request *req)
+{
+	return container_of(req, struct dwc2_hsotg_req, req);
+}
+
+static inline struct dwc2_hsotg_ep *our_ep(struct usb_ep *ep)
+{
+	return container_of(ep, struct dwc2_hsotg_ep, ep);
+}
+
+static inline struct dwc2_hsotg *to_hsotg(struct usb_gadget *gadget)
+{
+	return container_of(gadget, struct dwc2_hsotg, gadget);
+}
+
+static inline void dwc2_set_bit(struct dwc2_hsotg *hsotg, u32 offset, u32 val)
+{
+	dwc2_writel(hsotg, dwc2_readl(hsotg, offset) | val, offset);
+}
+
+static inline void dwc2_clear_bit(struct dwc2_hsotg *hsotg, u32 offset, u32 val)
+{
+	dwc2_writel(hsotg, dwc2_readl(hsotg, offset) & ~val, offset);
+}
+
+static inline struct dwc2_hsotg_ep *index_to_ep(struct dwc2_hsotg *hsotg,
+						u32 ep_index, u32 dir_in)
+{
+	if (dir_in)
+		return hsotg->eps_in[ep_index];
+	else
+		return hsotg->eps_out[ep_index];
+}
+
+/* forward declaration of functions */
+static void dwc2_hsotg_dump(struct dwc2_hsotg *hsotg);
+
+/**
+ * using_dma - return the DMA status of the driver.
+ * @hsotg: The driver state.
+ *
+ * Return true if we're using DMA.
+ *
+ * Currently, we have the DMA support code worked into everywhere
+ * that needs it, but the AMBA DMA implementation in the hardware can
+ * only DMA from 32bit aligned addresses. This means that gadgets such
+ * as the CDC Ethernet cannot work as they often pass packets which are
+ * not 32bit aligned.
+ *
+ * Unfortunately the choice to use DMA or not is global to the controller
+ * and seems to be only settable when the controller is being put through
+ * a core reset. This means we either need to fix the gadgets to take
+ * account of DMA alignment, or add bounce buffers (yuerk).
+ *
+ * g_using_dma is set depending on dts flag.
+ */
+static inline bool using_dma(struct dwc2_hsotg *hsotg)
+{
+	return hsotg->params.g_dma;
+}
+
+/*
+ * using_desc_dma - return the descriptor DMA status of the driver.
+ * @hsotg: The driver state.
+ *
+ * Return true if we're using descriptor DMA.
+ */
+static inline bool using_desc_dma(struct dwc2_hsotg *hsotg)
+{
+	return hsotg->params.g_dma_desc;
+}
+
+/**
+ * dwc2_gadget_incr_frame_num - Increments the targeted frame number.
+ * @hs_ep: The endpoint
+ *
+ * This function will also check if the frame number overruns DSTS_SOFFN_LIMIT.
+ * If an overrun occurs it will wrap the value and set the frame_overrun flag.
+ */
+static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	u16 limit = DSTS_SOFFN_LIMIT;
+
+	if (hsotg->gadget.speed != USB_SPEED_HIGH)
+		limit >>= 3;
+
+	hs_ep->target_frame += hs_ep->interval;
+	if (hs_ep->target_frame > limit) {
+		hs_ep->frame_overrun = true;
+		hs_ep->target_frame &= limit;
+	} else {
+		hs_ep->frame_overrun = false;
+	}
+}
+
+/**
+ * dwc2_gadget_dec_frame_num_by_one - Decrements the targeted frame number
+ *                                    by one.
+ * @hs_ep: The endpoint.
+ *
+ * This function used in service interval based scheduling flow to calculate
+ * descriptor frame number filed value. For service interval mode frame
+ * number in descriptor should point to last (u)frame in the interval.
+ *
+ */
+static inline void dwc2_gadget_dec_frame_num_by_one(struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	u16 limit = DSTS_SOFFN_LIMIT;
+
+	if (hsotg->gadget.speed != USB_SPEED_HIGH)
+		limit >>= 3;
+
+	if (hs_ep->target_frame)
+		hs_ep->target_frame -= 1;
+	else
+		hs_ep->target_frame = limit;
+}
+
+/**
+ * dwc2_hsotg_en_gsint - enable one or more of the general interrupt
+ * @hsotg: The device state
+ * @ints: A bitmask of the interrupts to enable
+ */
+static void dwc2_hsotg_en_gsint(struct dwc2_hsotg *hsotg, u32 ints)
+{
+	u32 gsintmsk = dwc2_readl(hsotg, GINTMSK);
+	u32 new_gsintmsk;
+
+	new_gsintmsk = gsintmsk | ints;
+
+	if (new_gsintmsk != gsintmsk) {
+		dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk);
+		dwc2_writel(hsotg, new_gsintmsk, GINTMSK);
+	}
+}
+
+/**
+ * dwc2_hsotg_disable_gsint - disable one or more of the general interrupt
+ * @hsotg: The device state
+ * @ints: A bitmask of the interrupts to enable
+ */
+static void dwc2_hsotg_disable_gsint(struct dwc2_hsotg *hsotg, u32 ints)
+{
+	u32 gsintmsk = dwc2_readl(hsotg, GINTMSK);
+	u32 new_gsintmsk;
+
+	new_gsintmsk = gsintmsk & ~ints;
+
+	if (new_gsintmsk != gsintmsk)
+		dwc2_writel(hsotg, new_gsintmsk, GINTMSK);
+}
+
+/**
+ * dwc2_hsotg_ctrl_epint - enable/disable an endpoint irq
+ * @hsotg: The device state
+ * @ep: The endpoint index
+ * @dir_in: True if direction is in.
+ * @en: The enable value, true to enable
+ *
+ * Set or clear the mask for an individual endpoint's interrupt
+ * request.
+ */
+static void dwc2_hsotg_ctrl_epint(struct dwc2_hsotg *hsotg,
+				  unsigned int ep, unsigned int dir_in,
+				 unsigned int en)
+{
+	unsigned long flags;
+	u32 bit = 1 << ep;
+	u32 daint;
+
+	if (!dir_in)
+		bit <<= 16;
+
+	local_irq_save(flags);
+	daint = dwc2_readl(hsotg, DAINTMSK);
+	if (en)
+		daint |= bit;
+	else
+		daint &= ~bit;
+	dwc2_writel(hsotg, daint, DAINTMSK);
+	local_irq_restore(flags);
+}
+
+/**
+ * dwc2_hsotg_tx_fifo_count - return count of TX FIFOs in device mode
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg)
+{
+	if (hsotg->hw_params.en_multiple_tx_fifo)
+		/* In dedicated FIFO mode we need count of IN EPs */
+		return hsotg->hw_params.num_dev_in_eps;
+	else
+		/* In shared FIFO mode we need count of Periodic IN EPs */
+		return hsotg->hw_params.num_dev_perio_in_ep;
+}
+
+/**
+ * dwc2_hsotg_tx_fifo_total_depth - return total FIFO depth available for
+ * device mode TX FIFOs
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg)
+{
+	int addr;
+	int tx_addr_max;
+	u32 np_tx_fifo_size;
+
+	np_tx_fifo_size = min_t(u32, hsotg->hw_params.dev_nperio_tx_fifo_size,
+				hsotg->params.g_np_tx_fifo_size);
+
+	/* Get Endpoint Info Control block size in DWORDs. */
+	tx_addr_max = hsotg->hw_params.total_fifo_size;
+
+	addr = hsotg->params.g_rx_fifo_size + np_tx_fifo_size;
+	if (tx_addr_max <= addr)
+		return 0;
+
+	return tx_addr_max - addr;
+}
+
+/**
+ * dwc2_gadget_wkup_alert_handler - Handler for WKUP_ALERT interrupt
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ */
+static void dwc2_gadget_wkup_alert_handler(struct dwc2_hsotg *hsotg)
+{
+	u32 gintsts2;
+	u32 gintmsk2;
+
+	gintsts2 = dwc2_readl(hsotg, GINTSTS2);
+	gintmsk2 = dwc2_readl(hsotg, GINTMSK2);
+	gintsts2 &= gintmsk2;
+
+	if (gintsts2 & GINTSTS2_WKUP_ALERT_INT) {
+		dev_dbg(hsotg->dev, "%s: Wkup_Alert_Int\n", __func__);
+		dwc2_set_bit(hsotg, GINTSTS2, GINTSTS2_WKUP_ALERT_INT);
+		dwc2_set_bit(hsotg, DCTL, DCTL_RMTWKUPSIG);
+	}
+}
+
+/**
+ * dwc2_hsotg_tx_fifo_average_depth - returns average depth of device mode
+ * TX FIFOs
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_hsotg_tx_fifo_average_depth(struct dwc2_hsotg *hsotg)
+{
+	int tx_fifo_count;
+	int tx_fifo_depth;
+
+	tx_fifo_depth = dwc2_hsotg_tx_fifo_total_depth(hsotg);
+
+	tx_fifo_count = dwc2_hsotg_tx_fifo_count(hsotg);
+
+	if (!tx_fifo_count)
+		return tx_fifo_depth;
+	else
+		return tx_fifo_depth / tx_fifo_count;
+}
+
+/**
+ * dwc2_hsotg_init_fifo - initialise non-periodic FIFOs
+ * @hsotg: The device instance.
+ */
+static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
+{
+	unsigned int ep;
+	unsigned int addr;
+	int timeout;
+
+	u32 val;
+	u32 *txfsz = hsotg->params.g_tx_fifo_size;
+
+	/* Reset fifo map if not correctly cleared during previous session */
+	WARN_ON(hsotg->fifo_map);
+	hsotg->fifo_map = 0;
+
+	/* set RX/NPTX FIFO sizes */
+	dwc2_writel(hsotg, hsotg->params.g_rx_fifo_size, GRXFSIZ);
+	dwc2_writel(hsotg, (hsotg->params.g_rx_fifo_size <<
+		    FIFOSIZE_STARTADDR_SHIFT) |
+		    (hsotg->params.g_np_tx_fifo_size << FIFOSIZE_DEPTH_SHIFT),
+		    GNPTXFSIZ);
+
+	/*
+	 * arange all the rest of the TX FIFOs, as some versions of this
+	 * block have overlapping default addresses. This also ensures
+	 * that if the settings have been changed, then they are set to
+	 * known values.
+	 */
+
+	/* start at the end of the GNPTXFSIZ, rounded up */
+	addr = hsotg->params.g_rx_fifo_size + hsotg->params.g_np_tx_fifo_size;
+
+	/*
+	 * Configure fifos sizes from provided configuration and assign
+	 * them to endpoints dynamically according to maxpacket size value of
+	 * given endpoint.
+	 */
+	for (ep = 1; ep < MAX_EPS_CHANNELS; ep++) {
+		if (!txfsz[ep])
+			continue;
+		val = addr;
+		val |= txfsz[ep] << FIFOSIZE_DEPTH_SHIFT;
+		WARN_ONCE(addr + txfsz[ep] > hsotg->fifo_mem,
+			  "insufficient fifo memory");
+		addr += txfsz[ep];
+
+		dwc2_writel(hsotg, val, DPTXFSIZN(ep));
+		val = dwc2_readl(hsotg, DPTXFSIZN(ep));
+	}
+
+	dwc2_writel(hsotg, hsotg->hw_params.total_fifo_size |
+		    addr << GDFIFOCFG_EPINFOBASE_SHIFT,
+		    GDFIFOCFG);
+	/*
+	 * according to p428 of the design guide, we need to ensure that
+	 * all fifos are flushed before continuing
+	 */
+
+	dwc2_writel(hsotg, GRSTCTL_TXFNUM(0x10) | GRSTCTL_TXFFLSH |
+	       GRSTCTL_RXFFLSH, GRSTCTL);
+
+	/* wait until the fifos are both flushed */
+	timeout = 100;
+	while (1) {
+		val = dwc2_readl(hsotg, GRSTCTL);
+
+		if ((val & (GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH)) == 0)
+			break;
+
+		if (--timeout == 0) {
+			dev_err(hsotg->dev,
+				"%s: timeout flushing fifos (GRSTCTL=%08x)\n",
+				__func__, val);
+			break;
+		}
+
+		udelay(1);
+	}
+
+	dev_dbg(hsotg->dev, "FIFOs reset, timeout at %d\n", timeout);
+}
+
+/**
+ * dwc2_hsotg_ep_alloc_request - allocate USB rerequest structure
+ * @ep: USB endpoint to allocate request for.
+ * @flags: Allocation flags
+ *
+ * Allocate a new USB request structure appropriate for the specified endpoint
+ */
+static struct usb_request *dwc2_hsotg_ep_alloc_request(struct usb_ep *ep,
+						       gfp_t flags)
+{
+	struct dwc2_hsotg_req *req;
+
+	req = kzalloc(sizeof(*req), flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+/**
+ * is_ep_periodic - return true if the endpoint is in periodic mode.
+ * @hs_ep: The endpoint to query.
+ *
+ * Returns true if the endpoint is in periodic mode, meaning it is being
+ * used for an Interrupt or ISO transfer.
+ */
+static inline int is_ep_periodic(struct dwc2_hsotg_ep *hs_ep)
+{
+	return hs_ep->periodic;
+}
+
+/**
+ * dwc2_hsotg_unmap_dma - unmap the DMA memory being used for the request
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint for the request
+ * @hs_req: The request being processed.
+ *
+ * This is the reverse of dwc2_hsotg_map_dma(), called for the completion
+ * of a request to ensure the buffer is ready for access by the caller.
+ */
+static void dwc2_hsotg_unmap_dma(struct dwc2_hsotg *hsotg,
+				 struct dwc2_hsotg_ep *hs_ep,
+				struct dwc2_hsotg_req *hs_req)
+{
+	struct usb_request *req = &hs_req->req;
+
+	usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->map_dir);
+}
+
+/*
+ * dwc2_gadget_alloc_ctrl_desc_chains - allocate DMA descriptor chains
+ * for Control endpoint
+ * @hsotg: The device state.
+ *
+ * This function will allocate 4 descriptor chains for EP 0: 2 for
+ * Setup stage, per one for IN and OUT data/status transactions.
+ */
+static int dwc2_gadget_alloc_ctrl_desc_chains(struct dwc2_hsotg *hsotg)
+{
+	hsotg->setup_desc[0] =
+		dmam_alloc_coherent(hsotg->dev,
+				    sizeof(struct dwc2_dma_desc),
+				    &hsotg->setup_desc_dma[0],
+				    GFP_KERNEL);
+	if (!hsotg->setup_desc[0])
+		goto fail;
+
+	hsotg->setup_desc[1] =
+		dmam_alloc_coherent(hsotg->dev,
+				    sizeof(struct dwc2_dma_desc),
+				    &hsotg->setup_desc_dma[1],
+				    GFP_KERNEL);
+	if (!hsotg->setup_desc[1])
+		goto fail;
+
+	hsotg->ctrl_in_desc =
+		dmam_alloc_coherent(hsotg->dev,
+				    sizeof(struct dwc2_dma_desc),
+				    &hsotg->ctrl_in_desc_dma,
+				    GFP_KERNEL);
+	if (!hsotg->ctrl_in_desc)
+		goto fail;
+
+	hsotg->ctrl_out_desc =
+		dmam_alloc_coherent(hsotg->dev,
+				    sizeof(struct dwc2_dma_desc),
+				    &hsotg->ctrl_out_desc_dma,
+				    GFP_KERNEL);
+	if (!hsotg->ctrl_out_desc)
+		goto fail;
+
+	return 0;
+
+fail:
+	return -ENOMEM;
+}
+
+/**
+ * dwc2_hsotg_write_fifo - write packet Data to the TxFIFO
+ * @hsotg: The controller state.
+ * @hs_ep: The endpoint we're going to write for.
+ * @hs_req: The request to write data for.
+ *
+ * This is called when the TxFIFO has some space in it to hold a new
+ * transmission and we have something to give it. The actual setup of
+ * the data size is done elsewhere, so all we have to do is to actually
+ * write the data.
+ *
+ * The return value is zero if there is more space (or nothing was done)
+ * otherwise -ENOSPC is returned if the FIFO space was used up.
+ *
+ * This routine is only needed for PIO
+ */
+static int dwc2_hsotg_write_fifo(struct dwc2_hsotg *hsotg,
+				 struct dwc2_hsotg_ep *hs_ep,
+				struct dwc2_hsotg_req *hs_req)
+{
+	bool periodic = is_ep_periodic(hs_ep);
+	u32 gnptxsts = dwc2_readl(hsotg, GNPTXSTS);
+	int buf_pos = hs_req->req.actual;
+	int to_write = hs_ep->size_loaded;
+	void *data;
+	int can_write;
+	int pkt_round;
+	int max_transfer;
+
+	to_write -= (buf_pos - hs_ep->last_load);
+
+	/* if there's nothing to write, get out early */
+	if (to_write == 0)
+		return 0;
+
+	if (periodic && !hsotg->dedicated_fifos) {
+		u32 epsize = dwc2_readl(hsotg, DIEPTSIZ(hs_ep->index));
+		int size_left;
+		int size_done;
+
+		/*
+		 * work out how much data was loaded so we can calculate
+		 * how much data is left in the fifo.
+		 */
+
+		size_left = DXEPTSIZ_XFERSIZE_GET(epsize);
+
+		/*
+		 * if shared fifo, we cannot write anything until the
+		 * previous data has been completely sent.
+		 */
+		if (hs_ep->fifo_load != 0) {
+			dwc2_hsotg_en_gsint(hsotg, GINTSTS_PTXFEMP);
+			return -ENOSPC;
+		}
+
+		dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n",
+			__func__, size_left,
+			hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size);
+
+		/* how much of the data has moved */
+		size_done = hs_ep->size_loaded - size_left;
+
+		/* how much data is left in the fifo */
+		can_write = hs_ep->fifo_load - size_done;
+		dev_dbg(hsotg->dev, "%s: => can_write1=%d\n",
+			__func__, can_write);
+
+		can_write = hs_ep->fifo_size - can_write;
+		dev_dbg(hsotg->dev, "%s: => can_write2=%d\n",
+			__func__, can_write);
+
+		if (can_write <= 0) {
+			dwc2_hsotg_en_gsint(hsotg, GINTSTS_PTXFEMP);
+			return -ENOSPC;
+		}
+	} else if (hsotg->dedicated_fifos && hs_ep->index != 0) {
+		can_write = dwc2_readl(hsotg,
+				       DTXFSTS(hs_ep->fifo_index));
+
+		can_write &= 0xffff;
+		can_write *= 4;
+	} else {
+		if (GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(gnptxsts) == 0) {
+			dev_dbg(hsotg->dev,
+				"%s: no queue slots available (0x%08x)\n",
+				__func__, gnptxsts);
+
+			dwc2_hsotg_en_gsint(hsotg, GINTSTS_NPTXFEMP);
+			return -ENOSPC;
+		}
+
+		can_write = GNPTXSTS_NP_TXF_SPC_AVAIL_GET(gnptxsts);
+		can_write *= 4;	/* fifo size is in 32bit quantities. */
+	}
+
+	max_transfer = hs_ep->ep.maxpacket * hs_ep->mc;
+
+	dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, max_transfer %d\n",
+		__func__, gnptxsts, can_write, to_write, max_transfer);
+
+	/*
+	 * limit to 512 bytes of data, it seems at least on the non-periodic
+	 * FIFO, requests of >512 cause the endpoint to get stuck with a
+	 * fragment of the end of the transfer in it.
+	 */
+	if (can_write > 512 && !periodic)
+		can_write = 512;
+
+	/*
+	 * limit the write to one max-packet size worth of data, but allow
+	 * the transfer to return that it did not run out of fifo space
+	 * doing it.
+	 */
+	if (to_write > max_transfer) {
+		to_write = max_transfer;
+
+		/* it's needed only when we do not use dedicated fifos */
+		if (!hsotg->dedicated_fifos)
+			dwc2_hsotg_en_gsint(hsotg,
+					    periodic ? GINTSTS_PTXFEMP :
+					   GINTSTS_NPTXFEMP);
+	}
+
+	/* see if we can write data */
+
+	if (to_write > can_write) {
+		to_write = can_write;
+		pkt_round = to_write % max_transfer;
+
+		/*
+		 * Round the write down to an
+		 * exact number of packets.
+		 *
+		 * Note, we do not currently check to see if we can ever
+		 * write a full packet or not to the FIFO.
+		 */
+
+		if (pkt_round)
+			to_write -= pkt_round;
+
+		/*
+		 * enable correct FIFO interrupt to alert us when there
+		 * is more room left.
+		 */
+
+		/* it's needed only when we do not use dedicated fifos */
+		if (!hsotg->dedicated_fifos)
+			dwc2_hsotg_en_gsint(hsotg,
+					    periodic ? GINTSTS_PTXFEMP :
+					   GINTSTS_NPTXFEMP);
+	}
+
+	dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n",
+		to_write, hs_req->req.length, can_write, buf_pos);
+
+	if (to_write <= 0)
+		return -ENOSPC;
+
+	hs_req->req.actual = buf_pos + to_write;
+	hs_ep->total_data += to_write;
+
+	if (periodic)
+		hs_ep->fifo_load += to_write;
+
+	to_write = DIV_ROUND_UP(to_write, 4);
+	data = hs_req->req.buf + buf_pos;
+
+	dwc2_writel_rep(hsotg, EPFIFO(hs_ep->index), data, to_write);
+
+	return (to_write >= can_write) ? -ENOSPC : 0;
+}
+
+/**
+ * get_ep_limit - get the maximum data legnth for this endpoint
+ * @hs_ep: The endpoint
+ *
+ * Return the maximum data that can be queued in one go on a given endpoint
+ * so that transfers that are too long can be split.
+ */
+static unsigned int get_ep_limit(struct dwc2_hsotg_ep *hs_ep)
+{
+	int index = hs_ep->index;
+	unsigned int maxsize;
+	unsigned int maxpkt;
+
+	if (index != 0) {
+		maxsize = DXEPTSIZ_XFERSIZE_LIMIT + 1;
+		maxpkt = DXEPTSIZ_PKTCNT_LIMIT + 1;
+	} else {
+		maxsize = 64 + 64;
+		if (hs_ep->dir_in)
+			maxpkt = DIEPTSIZ0_PKTCNT_LIMIT + 1;
+		else
+			maxpkt = 2;
+	}
+
+	/* we made the constant loading easier above by using +1 */
+	maxpkt--;
+	maxsize--;
+
+	/*
+	 * constrain by packet count if maxpkts*pktsize is greater
+	 * than the length register size.
+	 */
+
+	if ((maxpkt * hs_ep->ep.maxpacket) < maxsize)
+		maxsize = maxpkt * hs_ep->ep.maxpacket;
+
+	return maxsize;
+}
+
+/**
+ * dwc2_hsotg_read_frameno - read current frame number
+ * @hsotg: The device instance
+ *
+ * Return the current frame number
+ */
+static u32 dwc2_hsotg_read_frameno(struct dwc2_hsotg *hsotg)
+{
+	u32 dsts;
+
+	dsts = dwc2_readl(hsotg, DSTS);
+	dsts &= DSTS_SOFFN_MASK;
+	dsts >>= DSTS_SOFFN_SHIFT;
+
+	return dsts;
+}
+
+/**
+ * dwc2_gadget_get_chain_limit - get the maximum data payload value of the
+ * DMA descriptor chain prepared for specific endpoint
+ * @hs_ep: The endpoint
+ *
+ * Return the maximum data that can be queued in one go on a given endpoint
+ * depending on its descriptor chain capacity so that transfers that
+ * are too long can be split.
+ */
+static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
+{
+	const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
+	int is_isoc = hs_ep->isochronous;
+	unsigned int maxsize;
+	u32 mps = hs_ep->ep.maxpacket;
+	int dir_in = hs_ep->dir_in;
+
+	if (is_isoc)
+		maxsize = (hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_LIMIT :
+					   DEV_DMA_ISOC_RX_NBYTES_LIMIT) *
+					   MAX_DMA_DESC_NUM_HS_ISOC;
+	else
+		maxsize = DEV_DMA_NBYTES_LIMIT * MAX_DMA_DESC_NUM_GENERIC;
+
+	/* Interrupt OUT EP with mps not multiple of 4 */
+	if (hs_ep->index)
+		if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4))
+			maxsize = mps * MAX_DMA_DESC_NUM_GENERIC;
+
+	return maxsize;
+}
+
+/*
+ * dwc2_gadget_get_desc_params - get DMA descriptor parameters.
+ * @hs_ep: The endpoint
+ * @mask: RX/TX bytes mask to be defined
+ *
+ * Returns maximum data payload for one descriptor after analyzing endpoint
+ * characteristics.
+ * DMA descriptor transfer bytes limit depends on EP type:
+ * Control out - MPS,
+ * Isochronous - descriptor rx/tx bytes bitfield limit,
+ * Control In/Bulk/Interrupt - multiple of mps. This will allow to not
+ * have concatenations from various descriptors within one packet.
+ * Interrupt OUT - if mps not multiple of 4 then a single packet corresponds
+ * to a single descriptor.
+ *
+ * Selects corresponding mask for RX/TX bytes as well.
+ */
+static u32 dwc2_gadget_get_desc_params(struct dwc2_hsotg_ep *hs_ep, u32 *mask)
+{
+	const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
+	u32 mps = hs_ep->ep.maxpacket;
+	int dir_in = hs_ep->dir_in;
+	u32 desc_size = 0;
+
+	if (!hs_ep->index && !dir_in) {
+		desc_size = mps;
+		*mask = DEV_DMA_NBYTES_MASK;
+	} else if (hs_ep->isochronous) {
+		if (dir_in) {
+			desc_size = DEV_DMA_ISOC_TX_NBYTES_LIMIT;
+			*mask = DEV_DMA_ISOC_TX_NBYTES_MASK;
+		} else {
+			desc_size = DEV_DMA_ISOC_RX_NBYTES_LIMIT;
+			*mask = DEV_DMA_ISOC_RX_NBYTES_MASK;
+		}
+	} else {
+		desc_size = DEV_DMA_NBYTES_LIMIT;
+		*mask = DEV_DMA_NBYTES_MASK;
+
+		/* Round down desc_size to be mps multiple */
+		desc_size -= desc_size % mps;
+	}
+
+	/* Interrupt OUT EP with mps not multiple of 4 */
+	if (hs_ep->index)
+		if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4)) {
+			desc_size = mps;
+			*mask = DEV_DMA_NBYTES_MASK;
+		}
+
+	return desc_size;
+}
+
+static void dwc2_gadget_fill_nonisoc_xfer_ddma_one(struct dwc2_hsotg_ep *hs_ep,
+						 struct dwc2_dma_desc **desc,
+						 dma_addr_t dma_buff,
+						 unsigned int len,
+						 bool true_last)
+{
+	int dir_in = hs_ep->dir_in;
+	u32 mps = hs_ep->ep.maxpacket;
+	u32 maxsize = 0;
+	u32 offset = 0;
+	u32 mask = 0;
+	int i;
+
+	maxsize = dwc2_gadget_get_desc_params(hs_ep, &mask);
+
+	hs_ep->desc_count = (len / maxsize) +
+				((len % maxsize) ? 1 : 0);
+	if (len == 0)
+		hs_ep->desc_count = 1;
+
+	for (i = 0; i < hs_ep->desc_count; ++i) {
+		(*desc)->status = 0;
+		(*desc)->status |= (DEV_DMA_BUFF_STS_HBUSY
+				 << DEV_DMA_BUFF_STS_SHIFT);
+
+		if (len > maxsize) {
+			if (!hs_ep->index && !dir_in)
+				(*desc)->status |= (DEV_DMA_L | DEV_DMA_IOC);
+
+			(*desc)->status |=
+				maxsize << DEV_DMA_NBYTES_SHIFT & mask;
+			(*desc)->buf = dma_buff + offset;
+
+			len -= maxsize;
+			offset += maxsize;
+		} else {
+			if (true_last)
+				(*desc)->status |= (DEV_DMA_L | DEV_DMA_IOC);
+
+			if (dir_in)
+				(*desc)->status |= (len % mps) ? DEV_DMA_SHORT :
+					((hs_ep->send_zlp && true_last) ?
+					DEV_DMA_SHORT : 0);
+
+			(*desc)->status |=
+				len << DEV_DMA_NBYTES_SHIFT & mask;
+			(*desc)->buf = dma_buff + offset;
+		}
+
+		(*desc)->status &= ~DEV_DMA_BUFF_STS_MASK;
+		(*desc)->status |= (DEV_DMA_BUFF_STS_HREADY
+				 << DEV_DMA_BUFF_STS_SHIFT);
+		(*desc)++;
+	}
+}
+
+/*
+ * dwc2_gadget_config_nonisoc_xfer_ddma - prepare non ISOC DMA desc chain.
+ * @hs_ep: The endpoint
+ * @ureq: Request to transfer
+ * @offset: offset in bytes
+ * @len: Length of the transfer
+ *
+ * This function will iterate over descriptor chain and fill its entries
+ * with corresponding information based on transfer data.
+ */
+static void dwc2_gadget_config_nonisoc_xfer_ddma(struct dwc2_hsotg_ep *hs_ep,
+						 dma_addr_t dma_buff,
+						 unsigned int len)
+{
+	struct usb_request *ureq = NULL;
+	struct dwc2_dma_desc *desc = hs_ep->desc_list;
+	struct scatterlist *sg;
+	int i;
+	u8 desc_count = 0;
+
+	if (hs_ep->req)
+		ureq = &hs_ep->req->req;
+
+	/* non-DMA sg buffer */
+	if (!ureq || !ureq->num_sgs) {
+		dwc2_gadget_fill_nonisoc_xfer_ddma_one(hs_ep, &desc,
+			dma_buff, len, true);
+		return;
+	}
+
+	/* DMA sg buffer */
+	for_each_sg(ureq->sg, sg, ureq->num_sgs, i) {
+		dwc2_gadget_fill_nonisoc_xfer_ddma_one(hs_ep, &desc,
+			sg_dma_address(sg) + sg->offset, sg_dma_len(sg),
+			sg_is_last(sg));
+		desc_count += hs_ep->desc_count;
+	}
+
+	hs_ep->desc_count = desc_count;
+}
+
+/*
+ * dwc2_gadget_fill_isoc_desc - fills next isochronous descriptor in chain.
+ * @hs_ep: The isochronous endpoint.
+ * @dma_buff: usb requests dma buffer.
+ * @len: usb request transfer length.
+ *
+ * Fills next free descriptor with the data of the arrived usb request,
+ * frame info, sets Last and IOC bits increments next_desc. If filled
+ * descriptor is not the first one, removes L bit from the previous descriptor
+ * status.
+ */
+static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep,
+				      dma_addr_t dma_buff, unsigned int len)
+{
+	struct dwc2_dma_desc *desc;
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	u32 index;
+	u32 mask = 0;
+	u8 pid = 0;
+
+	dwc2_gadget_get_desc_params(hs_ep, &mask);
+
+	index = hs_ep->next_desc;
+	desc = &hs_ep->desc_list[index];
+
+	/* Check if descriptor chain full */
+	if ((desc->status >> DEV_DMA_BUFF_STS_SHIFT) ==
+	    DEV_DMA_BUFF_STS_HREADY) {
+		dev_dbg(hsotg->dev, "%s: desc chain full\n", __func__);
+		return 1;
+	}
+
+	/* Clear L bit of previous desc if more than one entries in the chain */
+	if (hs_ep->next_desc)
+		hs_ep->desc_list[index - 1].status &= ~DEV_DMA_L;
+
+	dev_dbg(hsotg->dev, "%s: Filling ep %d, dir %s isoc desc # %d\n",
+		__func__, hs_ep->index, hs_ep->dir_in ? "in" : "out", index);
+
+	desc->status = 0;
+	desc->status |= (DEV_DMA_BUFF_STS_HBUSY	<< DEV_DMA_BUFF_STS_SHIFT);
+
+	desc->buf = dma_buff;
+	desc->status |= (DEV_DMA_L | DEV_DMA_IOC |
+			 ((len << DEV_DMA_NBYTES_SHIFT) & mask));
+
+	if (hs_ep->dir_in) {
+		if (len)
+			pid = DIV_ROUND_UP(len, hs_ep->ep.maxpacket);
+		else
+			pid = 1;
+		desc->status |= ((pid << DEV_DMA_ISOC_PID_SHIFT) &
+				 DEV_DMA_ISOC_PID_MASK) |
+				((len % hs_ep->ep.maxpacket) ?
+				 DEV_DMA_SHORT : 0) |
+				((hs_ep->target_frame <<
+				  DEV_DMA_ISOC_FRNUM_SHIFT) &
+				 DEV_DMA_ISOC_FRNUM_MASK);
+	}
+
+	desc->status &= ~DEV_DMA_BUFF_STS_MASK;
+	desc->status |= (DEV_DMA_BUFF_STS_HREADY << DEV_DMA_BUFF_STS_SHIFT);
+
+	/* Increment frame number by interval for IN */
+	if (hs_ep->dir_in)
+		dwc2_gadget_incr_frame_num(hs_ep);
+
+	/* Update index of last configured entry in the chain */
+	hs_ep->next_desc++;
+	if (hs_ep->next_desc >= MAX_DMA_DESC_NUM_HS_ISOC)
+		hs_ep->next_desc = 0;
+
+	return 0;
+}
+
+/*
+ * dwc2_gadget_start_isoc_ddma - start isochronous transfer in DDMA
+ * @hs_ep: The isochronous endpoint.
+ *
+ * Prepare descriptor chain for isochronous endpoints. Afterwards
+ * write DMA address to HW and enable the endpoint.
+ */
+static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	struct dwc2_hsotg_req *hs_req, *treq;
+	int index = hs_ep->index;
+	int ret;
+	int i;
+	u32 dma_reg;
+	u32 depctl;
+	u32 ctrl;
+	struct dwc2_dma_desc *desc;
+
+	if (list_empty(&hs_ep->queue)) {
+		hs_ep->target_frame = TARGET_FRAME_INITIAL;
+		dev_dbg(hsotg->dev, "%s: No requests in queue\n", __func__);
+		return;
+	}
+
+	/* Initialize descriptor chain by Host Busy status */
+	for (i = 0; i < MAX_DMA_DESC_NUM_HS_ISOC; i++) {
+		desc = &hs_ep->desc_list[i];
+		desc->status = 0;
+		desc->status |= (DEV_DMA_BUFF_STS_HBUSY
+				    << DEV_DMA_BUFF_STS_SHIFT);
+	}
+
+	hs_ep->next_desc = 0;
+	list_for_each_entry_safe(hs_req, treq, &hs_ep->queue, queue) {
+		dma_addr_t dma_addr = hs_req->req.dma;
+
+		if (hs_req->req.num_sgs) {
+			WARN_ON(hs_req->req.num_sgs > 1);
+			dma_addr = sg_dma_address(hs_req->req.sg);
+		}
+		ret = dwc2_gadget_fill_isoc_desc(hs_ep, dma_addr,
+						 hs_req->req.length);
+		if (ret)
+			break;
+	}
+
+	hs_ep->compl_desc = 0;
+	depctl = hs_ep->dir_in ? DIEPCTL(index) : DOEPCTL(index);
+	dma_reg = hs_ep->dir_in ? DIEPDMA(index) : DOEPDMA(index);
+
+	/* write descriptor chain address to control register */
+	dwc2_writel(hsotg, hs_ep->desc_list_dma, dma_reg);
+
+	ctrl = dwc2_readl(hsotg, depctl);
+	ctrl |= DXEPCTL_EPENA | DXEPCTL_CNAK;
+	dwc2_writel(hsotg, ctrl, depctl);
+}
+
+static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep);
+static void dwc2_hsotg_complete_request(struct dwc2_hsotg *hsotg,
+					struct dwc2_hsotg_ep *hs_ep,
+				       struct dwc2_hsotg_req *hs_req,
+				       int result);
+
+/**
+ * dwc2_hsotg_start_req - start a USB request from an endpoint's queue
+ * @hsotg: The controller state.
+ * @hs_ep: The endpoint to process a request for
+ * @hs_req: The request to start.
+ * @continuing: True if we are doing more for the current request.
+ *
+ * Start the given request running by setting the endpoint registers
+ * appropriately, and writing any data to the FIFOs.
+ */
+static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg,
+				 struct dwc2_hsotg_ep *hs_ep,
+				struct dwc2_hsotg_req *hs_req,
+				bool continuing)
+{
+	struct usb_request *ureq = &hs_req->req;
+	int index = hs_ep->index;
+	int dir_in = hs_ep->dir_in;
+	u32 epctrl_reg;
+	u32 epsize_reg;
+	u32 epsize;
+	u32 ctrl;
+	unsigned int length;
+	unsigned int packets;
+	unsigned int maxreq;
+	unsigned int dma_reg;
+
+	if (index != 0) {
+		if (hs_ep->req && !continuing) {
+			dev_err(hsotg->dev, "%s: active request\n", __func__);
+			WARN_ON(1);
+			return;
+		} else if (hs_ep->req != hs_req && continuing) {
+			dev_err(hsotg->dev,
+				"%s: continue different req\n", __func__);
+			WARN_ON(1);
+			return;
+		}
+	}
+
+	dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index);
+	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
+	epsize_reg = dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index);
+
+	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n",
+		__func__, dwc2_readl(hsotg, epctrl_reg), index,
+		hs_ep->dir_in ? "in" : "out");
+
+	/* If endpoint is stalled, we will restart request later */
+	ctrl = dwc2_readl(hsotg, epctrl_reg);
+
+	if (index && ctrl & DXEPCTL_STALL) {
+		dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index);
+		return;
+	}
+
+	length = ureq->length - ureq->actual;
+	dev_dbg(hsotg->dev, "ureq->length:%d ureq->actual:%d\n",
+		ureq->length, ureq->actual);
+
+	if (!using_desc_dma(hsotg))
+		maxreq = get_ep_limit(hs_ep);
+	else
+		maxreq = dwc2_gadget_get_chain_limit(hs_ep);
+
+	if (length > maxreq) {
+		int round = maxreq % hs_ep->ep.maxpacket;
+
+		dev_dbg(hsotg->dev, "%s: length %d, max-req %d, r %d\n",
+			__func__, length, maxreq, round);
+
+		/* round down to multiple of packets */
+		if (round)
+			maxreq -= round;
+
+		length = maxreq;
+	}
+
+	if (length)
+		packets = DIV_ROUND_UP(length, hs_ep->ep.maxpacket);
+	else
+		packets = 1;	/* send one packet if length is zero. */
+
+	if (dir_in && index != 0)
+		if (hs_ep->isochronous)
+			epsize = DXEPTSIZ_MC(packets);
+		else
+			epsize = DXEPTSIZ_MC(1);
+	else
+		epsize = 0;
+
+	/*
+	 * zero length packet should be programmed on its own and should not
+	 * be counted in DIEPTSIZ.PktCnt with other packets.
+	 */
+	if (dir_in && ureq->zero && !continuing) {
+		/* Test if zlp is actually required. */
+		if ((ureq->length >= hs_ep->ep.maxpacket) &&
+		    !(ureq->length % hs_ep->ep.maxpacket))
+			hs_ep->send_zlp = 1;
+	}
+
+	epsize |= DXEPTSIZ_PKTCNT(packets);
+	epsize |= DXEPTSIZ_XFERSIZE(length);
+
+	dev_dbg(hsotg->dev, "%s: %d@%d/%d, 0x%08x => 0x%08x\n",
+		__func__, packets, length, ureq->length, epsize, epsize_reg);
+
+	/* store the request as the current one we're doing */
+	hs_ep->req = hs_req;
+
+	if (using_desc_dma(hsotg)) {
+		u32 offset = 0;
+		u32 mps = hs_ep->ep.maxpacket;
+
+		/* Adjust length: EP0 - MPS, other OUT EPs - multiple of MPS */
+		if (!dir_in) {
+			if (!index)
+				length = mps;
+			else if (length % mps)
+				length += (mps - (length % mps));
+		}
+
+		if (continuing)
+			offset = ureq->actual;
+
+		/* Fill DDMA chain entries */
+		dwc2_gadget_config_nonisoc_xfer_ddma(hs_ep, ureq->dma + offset,
+						     length);
+
+		/* write descriptor chain address to control register */
+		dwc2_writel(hsotg, hs_ep->desc_list_dma, dma_reg);
+
+		dev_dbg(hsotg->dev, "%s: %08x pad => 0x%08x\n",
+			__func__, (u32)hs_ep->desc_list_dma, dma_reg);
+	} else {
+		/* write size / packets */
+		dwc2_writel(hsotg, epsize, epsize_reg);
+
+		if (using_dma(hsotg) && !continuing && (length != 0)) {
+			/*
+			 * write DMA address to control register, buffer
+			 * already synced by dwc2_hsotg_ep_queue().
+			 */
+
+			dwc2_writel(hsotg, ureq->dma, dma_reg);
+
+			dev_dbg(hsotg->dev, "%s: %pad => 0x%08x\n",
+				__func__, &ureq->dma, dma_reg);
+		}
+	}
+
+	if (hs_ep->isochronous) {
+		if (!dwc2_gadget_target_frame_elapsed(hs_ep)) {
+			if (hs_ep->interval == 1) {
+				if (hs_ep->target_frame & 0x1)
+					ctrl |= DXEPCTL_SETODDFR;
+				else
+					ctrl |= DXEPCTL_SETEVENFR;
+			}
+			ctrl |= DXEPCTL_CNAK;
+		} else {
+			hs_req->req.frame_number = hs_ep->target_frame;
+			hs_req->req.actual = 0;
+			dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA);
+			return;
+		}
+	}
+
+	ctrl |= DXEPCTL_EPENA;	/* ensure ep enabled */
+
+	dev_dbg(hsotg->dev, "ep0 state:%d\n", hsotg->ep0_state);
+
+	/* For Setup request do not clear NAK */
+	if (!(index == 0 && hsotg->ep0_state == DWC2_EP0_SETUP))
+		ctrl |= DXEPCTL_CNAK;	/* clear NAK set by core */
+
+	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
+	dwc2_writel(hsotg, ctrl, epctrl_reg);
+
+	/*
+	 * set these, it seems that DMA support increments past the end
+	 * of the packet buffer so we need to calculate the length from
+	 * this information.
+	 */
+	hs_ep->size_loaded = length;
+	hs_ep->last_load = ureq->actual;
+
+	if (dir_in && !using_dma(hsotg)) {
+		/* set these anyway, we may need them for non-periodic in */
+		hs_ep->fifo_load = 0;
+
+		dwc2_hsotg_write_fifo(hsotg, hs_ep, hs_req);
+	}
+
+	/*
+	 * Note, trying to clear the NAK here causes problems with transmit
+	 * on the S3C6400 ending up with the TXFIFO becoming full.
+	 */
+
+	/* check ep is enabled */
+	if (!(dwc2_readl(hsotg, epctrl_reg) & DXEPCTL_EPENA))
+		dev_dbg(hsotg->dev,
+			"ep%d: failed to become enabled (DXEPCTL=0x%08x)?\n",
+			 index, dwc2_readl(hsotg, epctrl_reg));
+
+	dev_dbg(hsotg->dev, "%s: DXEPCTL=0x%08x\n",
+		__func__, dwc2_readl(hsotg, epctrl_reg));
+
+	/* enable ep interrupts */
+	dwc2_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 1);
+}
+
+/**
+ * dwc2_hsotg_map_dma - map the DMA memory being used for the request
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint the request is on.
+ * @req: The request being processed.
+ *
+ * We've been asked to queue a request, so ensure that the memory buffer
+ * is correctly setup for DMA. If we've been passed an extant DMA address
+ * then ensure the buffer has been synced to memory. If our buffer has no
+ * DMA memory, then we map the memory and mark our request to allow us to
+ * cleanup on completion.
+ */
+static int dwc2_hsotg_map_dma(struct dwc2_hsotg *hsotg,
+			      struct dwc2_hsotg_ep *hs_ep,
+			     struct usb_request *req)
+{
+	int ret;
+
+	hs_ep->map_dir = hs_ep->dir_in;
+	ret = usb_gadget_map_request(&hsotg->gadget, req, hs_ep->dir_in);
+	if (ret)
+		goto dma_error;
+
+	return 0;
+
+dma_error:
+	dev_err(hsotg->dev, "%s: failed to map buffer %p, %d bytes\n",
+		__func__, req->buf, req->length);
+
+	return -EIO;
+}
+
+static int dwc2_hsotg_handle_unaligned_buf_start(struct dwc2_hsotg *hsotg,
+						 struct dwc2_hsotg_ep *hs_ep,
+						 struct dwc2_hsotg_req *hs_req)
+{
+	void *req_buf = hs_req->req.buf;
+
+	/* If dma is not being used or buffer is aligned */
+	if (!using_dma(hsotg) || !((long)req_buf & 3))
+		return 0;
+
+	WARN_ON(hs_req->saved_req_buf);
+
+	dev_dbg(hsotg->dev, "%s: %s: buf=%p length=%d\n", __func__,
+		hs_ep->ep.name, req_buf, hs_req->req.length);
+
+	hs_req->req.buf = kmalloc(hs_req->req.length, GFP_ATOMIC);
+	if (!hs_req->req.buf) {
+		hs_req->req.buf = req_buf;
+		dev_err(hsotg->dev,
+			"%s: unable to allocate memory for bounce buffer\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	/* Save actual buffer */
+	hs_req->saved_req_buf = req_buf;
+
+	if (hs_ep->dir_in)
+		memcpy(hs_req->req.buf, req_buf, hs_req->req.length);
+	return 0;
+}
+
+static void
+dwc2_hsotg_handle_unaligned_buf_complete(struct dwc2_hsotg *hsotg,
+					 struct dwc2_hsotg_ep *hs_ep,
+					 struct dwc2_hsotg_req *hs_req)
+{
+	/* If dma is not being used or buffer was aligned */
+	if (!using_dma(hsotg) || !hs_req->saved_req_buf)
+		return;
+
+	dev_dbg(hsotg->dev, "%s: %s: status=%d actual-length=%d\n", __func__,
+		hs_ep->ep.name, hs_req->req.status, hs_req->req.actual);
+
+	/* Copy data from bounce buffer on successful out transfer */
+	if (!hs_ep->dir_in && !hs_req->req.status)
+		memcpy(hs_req->saved_req_buf, hs_req->req.buf,
+		       hs_req->req.actual);
+
+	/* Free bounce buffer */
+	kfree(hs_req->req.buf);
+
+	hs_req->req.buf = hs_req->saved_req_buf;
+	hs_req->saved_req_buf = NULL;
+}
+
+/**
+ * dwc2_gadget_target_frame_elapsed - Checks target frame
+ * @hs_ep: The driver endpoint to check
+ *
+ * Returns 1 if targeted frame elapsed. If returned 1 then we need to drop
+ * corresponding transfer.
+ */
+static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	u32 target_frame = hs_ep->target_frame;
+	u32 current_frame = hsotg->frame_number;
+	bool frame_overrun = hs_ep->frame_overrun;
+	u16 limit = DSTS_SOFFN_LIMIT;
+
+	if (hsotg->gadget.speed != USB_SPEED_HIGH)
+		limit >>= 3;
+
+	if (!frame_overrun && current_frame >= target_frame)
+		return true;
+
+	if (frame_overrun && current_frame >= target_frame &&
+	    ((current_frame - target_frame) < limit / 2))
+		return true;
+
+	return false;
+}
+
+/*
+ * dwc2_gadget_set_ep0_desc_chain - Set EP's desc chain pointers
+ * @hsotg: The driver state
+ * @hs_ep: the ep descriptor chain is for
+ *
+ * Called to update EP0 structure's pointers depend on stage of
+ * control transfer.
+ */
+static int dwc2_gadget_set_ep0_desc_chain(struct dwc2_hsotg *hsotg,
+					  struct dwc2_hsotg_ep *hs_ep)
+{
+	switch (hsotg->ep0_state) {
+	case DWC2_EP0_SETUP:
+	case DWC2_EP0_STATUS_OUT:
+		hs_ep->desc_list = hsotg->setup_desc[0];
+		hs_ep->desc_list_dma = hsotg->setup_desc_dma[0];
+		break;
+	case DWC2_EP0_DATA_IN:
+	case DWC2_EP0_STATUS_IN:
+		hs_ep->desc_list = hsotg->ctrl_in_desc;
+		hs_ep->desc_list_dma = hsotg->ctrl_in_desc_dma;
+		break;
+	case DWC2_EP0_DATA_OUT:
+		hs_ep->desc_list = hsotg->ctrl_out_desc;
+		hs_ep->desc_list_dma = hsotg->ctrl_out_desc_dma;
+		break;
+	default:
+		dev_err(hsotg->dev, "invalid EP 0 state in queue %d\n",
+			hsotg->ep0_state);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
+			       gfp_t gfp_flags)
+{
+	struct dwc2_hsotg_req *hs_req = our_req(req);
+	struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hs = hs_ep->parent;
+	bool first;
+	int ret;
+	u32 maxsize = 0;
+	u32 mask = 0;
+
+
+	dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n",
+		ep->name, req, req->length, req->buf, req->no_interrupt,
+		req->zero, req->short_not_ok);
+
+	/* Prevent new request submission when controller is suspended */
+	if (hs->lx_state != DWC2_L0) {
+		dev_dbg(hs->dev, "%s: submit request only in active state\n",
+			__func__);
+		return -EAGAIN;
+	}
+
+	/* initialise status of the request */
+	INIT_LIST_HEAD(&hs_req->queue);
+	req->actual = 0;
+	req->status = -EINPROGRESS;
+
+	/* Don't queue ISOC request if length greater than mps*mc */
+	if (hs_ep->isochronous &&
+	    req->length > (hs_ep->mc * hs_ep->ep.maxpacket)) {
+		dev_err(hs->dev, "req length > maxpacket*mc\n");
+		return -EINVAL;
+	}
+
+	/* In DDMA mode for ISOC's don't queue request if length greater
+	 * than descriptor limits.
+	 */
+	if (using_desc_dma(hs) && hs_ep->isochronous) {
+		maxsize = dwc2_gadget_get_desc_params(hs_ep, &mask);
+		if (hs_ep->dir_in && req->length > maxsize) {
+			dev_err(hs->dev, "wrong length %d (maxsize=%d)\n",
+				req->length, maxsize);
+			return -EINVAL;
+		}
+
+		if (!hs_ep->dir_in && req->length > hs_ep->ep.maxpacket) {
+			dev_err(hs->dev, "ISOC OUT: wrong length %d (mps=%d)\n",
+				req->length, hs_ep->ep.maxpacket);
+			return -EINVAL;
+		}
+	}
+
+	ret = dwc2_hsotg_handle_unaligned_buf_start(hs, hs_ep, hs_req);
+	if (ret)
+		return ret;
+
+	/* if we're using DMA, sync the buffers as necessary */
+	if (using_dma(hs)) {
+		ret = dwc2_hsotg_map_dma(hs, hs_ep, req);
+		if (ret)
+			return ret;
+	}
+	/* If using descriptor DMA configure EP0 descriptor chain pointers */
+	if (using_desc_dma(hs) && !hs_ep->index) {
+		ret = dwc2_gadget_set_ep0_desc_chain(hs, hs_ep);
+		if (ret)
+			return ret;
+	}
+
+	first = list_empty(&hs_ep->queue);
+	list_add_tail(&hs_req->queue, &hs_ep->queue);
+
+	/*
+	 * Handle DDMA isochronous transfers separately - just add new entry
+	 * to the descriptor chain.
+	 * Transfer will be started once SW gets either one of NAK or
+	 * OutTknEpDis interrupts.
+	 */
+	if (using_desc_dma(hs) && hs_ep->isochronous) {
+		if (hs_ep->target_frame != TARGET_FRAME_INITIAL) {
+			dma_addr_t dma_addr = hs_req->req.dma;
+
+			if (hs_req->req.num_sgs) {
+				WARN_ON(hs_req->req.num_sgs > 1);
+				dma_addr = sg_dma_address(hs_req->req.sg);
+			}
+			dwc2_gadget_fill_isoc_desc(hs_ep, dma_addr,
+						   hs_req->req.length);
+		}
+		return 0;
+	}
+
+	/* Change EP direction if status phase request is after data out */
+	if (!hs_ep->index && !req->length && !hs_ep->dir_in &&
+	    hs->ep0_state == DWC2_EP0_DATA_OUT)
+		hs_ep->dir_in = 1;
+
+	if (first) {
+		if (!hs_ep->isochronous) {
+			dwc2_hsotg_start_req(hs, hs_ep, hs_req, false);
+			return 0;
+		}
+
+		/* Update current frame number value. */
+		hs->frame_number = dwc2_hsotg_read_frameno(hs);
+		while (dwc2_gadget_target_frame_elapsed(hs_ep)) {
+			dwc2_gadget_incr_frame_num(hs_ep);
+			/* Update current frame number value once more as it
+			 * changes here.
+			 */
+			hs->frame_number = dwc2_hsotg_read_frameno(hs);
+		}
+
+		if (hs_ep->target_frame != TARGET_FRAME_INITIAL)
+			dwc2_hsotg_start_req(hs, hs_ep, hs_req, false);
+	}
+	return 0;
+}
+
+static int dwc2_hsotg_ep_queue_lock(struct usb_ep *ep, struct usb_request *req,
+				    gfp_t gfp_flags)
+{
+	struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hs = hs_ep->parent;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&hs->lock, flags);
+	ret = dwc2_hsotg_ep_queue(ep, req, gfp_flags);
+	spin_unlock_irqrestore(&hs->lock, flags);
+
+	return ret;
+}
+
+static void dwc2_hsotg_ep_free_request(struct usb_ep *ep,
+				       struct usb_request *req)
+{
+	struct dwc2_hsotg_req *hs_req = our_req(req);
+
+	kfree(hs_req);
+}
+
+/**
+ * dwc2_hsotg_complete_oursetup - setup completion callback
+ * @ep: The endpoint the request was on.
+ * @req: The request completed.
+ *
+ * Called on completion of any requests the driver itself
+ * submitted that need cleaning up.
+ */
+static void dwc2_hsotg_complete_oursetup(struct usb_ep *ep,
+					 struct usb_request *req)
+{
+	struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+
+	dev_dbg(hsotg->dev, "%s: ep %p, req %p\n", __func__, ep, req);
+
+	dwc2_hsotg_ep_free_request(ep, req);
+}
+
+/**
+ * ep_from_windex - convert control wIndex value to endpoint
+ * @hsotg: The driver state.
+ * @windex: The control request wIndex field (in host order).
+ *
+ * Convert the given wIndex into a pointer to an driver endpoint
+ * structure, or return NULL if it is not a valid endpoint.
+ */
+static struct dwc2_hsotg_ep *ep_from_windex(struct dwc2_hsotg *hsotg,
+					    u32 windex)
+{
+	int dir = (windex & USB_DIR_IN) ? 1 : 0;
+	int idx = windex & 0x7F;
+
+	if (windex >= 0x100)
+		return NULL;
+
+	if (idx > hsotg->num_of_eps)
+		return NULL;
+
+	return index_to_ep(hsotg, idx, dir);
+}
+
+/**
+ * dwc2_hsotg_set_test_mode - Enable usb Test Modes
+ * @hsotg: The driver state.
+ * @testmode: requested usb test mode
+ * Enable usb Test Mode requested by the Host.
+ */
+int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode)
+{
+	int dctl = dwc2_readl(hsotg, DCTL);
+
+	dctl &= ~DCTL_TSTCTL_MASK;
+	switch (testmode) {
+	case USB_TEST_J:
+	case USB_TEST_K:
+	case USB_TEST_SE0_NAK:
+	case USB_TEST_PACKET:
+	case USB_TEST_FORCE_ENABLE:
+		dctl |= testmode << DCTL_TSTCTL_SHIFT;
+		break;
+	default:
+		return -EINVAL;
+	}
+	dwc2_writel(hsotg, dctl, DCTL);
+	return 0;
+}
+
+/**
+ * dwc2_hsotg_send_reply - send reply to control request
+ * @hsotg: The device state
+ * @ep: Endpoint 0
+ * @buff: Buffer for request
+ * @length: Length of reply.
+ *
+ * Create a request and queue it on the given endpoint. This is useful as
+ * an internal method of sending replies to certain control requests, etc.
+ */
+static int dwc2_hsotg_send_reply(struct dwc2_hsotg *hsotg,
+				 struct dwc2_hsotg_ep *ep,
+				void *buff,
+				int length)
+{
+	struct usb_request *req;
+	int ret;
+
+	dev_dbg(hsotg->dev, "%s: buff %p, len %d\n", __func__, buff, length);
+
+	req = dwc2_hsotg_ep_alloc_request(&ep->ep, GFP_ATOMIC);
+	hsotg->ep0_reply = req;
+	if (!req) {
+		dev_warn(hsotg->dev, "%s: cannot alloc req\n", __func__);
+		return -ENOMEM;
+	}
+
+	req->buf = hsotg->ep0_buff;
+	req->length = length;
+	/*
+	 * zero flag is for sending zlp in DATA IN stage. It has no impact on
+	 * STATUS stage.
+	 */
+	req->zero = 0;
+	req->complete = dwc2_hsotg_complete_oursetup;
+
+	if (length)
+		memcpy(req->buf, buff, length);
+
+	ret = dwc2_hsotg_ep_queue(&ep->ep, req, GFP_ATOMIC);
+	if (ret) {
+		dev_warn(hsotg->dev, "%s: cannot queue req\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * dwc2_hsotg_process_req_status - process request GET_STATUS
+ * @hsotg: The device state
+ * @ctrl: USB control request
+ */
+static int dwc2_hsotg_process_req_status(struct dwc2_hsotg *hsotg,
+					 struct usb_ctrlrequest *ctrl)
+{
+	struct dwc2_hsotg_ep *ep0 = hsotg->eps_out[0];
+	struct dwc2_hsotg_ep *ep;
+	__le16 reply;
+	u16 status;
+	int ret;
+
+	dev_dbg(hsotg->dev, "%s: USB_REQ_GET_STATUS\n", __func__);
+
+	if (!ep0->dir_in) {
+		dev_warn(hsotg->dev, "%s: direction out?\n", __func__);
+		return -EINVAL;
+	}
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		status = hsotg->gadget.is_selfpowered <<
+			 USB_DEVICE_SELF_POWERED;
+		status |= hsotg->remote_wakeup_allowed <<
+			  USB_DEVICE_REMOTE_WAKEUP;
+		reply = cpu_to_le16(status);
+		break;
+
+	case USB_RECIP_INTERFACE:
+		/* currently, the data result should be zero */
+		reply = cpu_to_le16(0);
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex));
+		if (!ep)
+			return -ENOENT;
+
+		reply = cpu_to_le16(ep->halted ? 1 : 0);
+		break;
+
+	default:
+		return 0;
+	}
+
+	if (le16_to_cpu(ctrl->wLength) != 2)
+		return -EINVAL;
+
+	ret = dwc2_hsotg_send_reply(hsotg, ep0, &reply, 2);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to send reply\n", __func__);
+		return ret;
+	}
+
+	return 1;
+}
+
+static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value, bool now);
+
+/**
+ * get_ep_head - return the first request on the endpoint
+ * @hs_ep: The controller endpoint to get
+ *
+ * Get the first request on the endpoint.
+ */
+static struct dwc2_hsotg_req *get_ep_head(struct dwc2_hsotg_ep *hs_ep)
+{
+	return list_first_entry_or_null(&hs_ep->queue, struct dwc2_hsotg_req,
+					queue);
+}
+
+/**
+ * dwc2_gadget_start_next_request - Starts next request from ep queue
+ * @hs_ep: Endpoint structure
+ *
+ * If queue is empty and EP is ISOC-OUT - unmasks OUTTKNEPDIS which is masked
+ * in its handler. Hence we need to unmask it here to be able to do
+ * resynchronization.
+ */
+static void dwc2_gadget_start_next_request(struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	int dir_in = hs_ep->dir_in;
+	struct dwc2_hsotg_req *hs_req;
+
+	if (!list_empty(&hs_ep->queue)) {
+		hs_req = get_ep_head(hs_ep);
+		dwc2_hsotg_start_req(hsotg, hs_ep, hs_req, false);
+		return;
+	}
+	if (!hs_ep->isochronous)
+		return;
+
+	if (dir_in) {
+		dev_dbg(hsotg->dev, "%s: No more ISOC-IN requests\n",
+			__func__);
+	} else {
+		dev_dbg(hsotg->dev, "%s: No more ISOC-OUT requests\n",
+			__func__);
+	}
+}
+
+/**
+ * dwc2_hsotg_process_req_feature - process request {SET,CLEAR}_FEATURE
+ * @hsotg: The device state
+ * @ctrl: USB control request
+ */
+static int dwc2_hsotg_process_req_feature(struct dwc2_hsotg *hsotg,
+					  struct usb_ctrlrequest *ctrl)
+{
+	struct dwc2_hsotg_ep *ep0 = hsotg->eps_out[0];
+	struct dwc2_hsotg_req *hs_req;
+	bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
+	struct dwc2_hsotg_ep *ep;
+	int ret;
+	bool halted;
+	u32 recip;
+	u32 wValue;
+	u32 wIndex;
+
+	dev_dbg(hsotg->dev, "%s: %s_FEATURE\n",
+		__func__, set ? "SET" : "CLEAR");
+
+	wValue = le16_to_cpu(ctrl->wValue);
+	wIndex = le16_to_cpu(ctrl->wIndex);
+	recip = ctrl->bRequestType & USB_RECIP_MASK;
+
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		switch (wValue) {
+		case USB_DEVICE_REMOTE_WAKEUP:
+			if (set)
+				hsotg->remote_wakeup_allowed = 1;
+			else
+				hsotg->remote_wakeup_allowed = 0;
+			break;
+
+		case USB_DEVICE_TEST_MODE:
+			if ((wIndex & 0xff) != 0)
+				return -EINVAL;
+			if (!set)
+				return -EINVAL;
+
+			hsotg->test_mode = wIndex >> 8;
+			break;
+		default:
+			return -ENOENT;
+		}
+
+		ret = dwc2_hsotg_send_reply(hsotg, ep0, NULL, 0);
+		if (ret) {
+			dev_err(hsotg->dev,
+				"%s: failed to send reply\n", __func__);
+			return ret;
+		}
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		ep = ep_from_windex(hsotg, wIndex);
+		if (!ep) {
+			dev_dbg(hsotg->dev, "%s: no endpoint for 0x%04x\n",
+				__func__, wIndex);
+			return -ENOENT;
+		}
+
+		switch (wValue) {
+		case USB_ENDPOINT_HALT:
+			halted = ep->halted;
+
+			if (!ep->wedged)
+				dwc2_hsotg_ep_sethalt(&ep->ep, set, true);
+
+			ret = dwc2_hsotg_send_reply(hsotg, ep0, NULL, 0);
+			if (ret) {
+				dev_err(hsotg->dev,
+					"%s: failed to send reply\n", __func__);
+				return ret;
+			}
+
+			/*
+			 * we have to complete all requests for ep if it was
+			 * halted, and the halt was cleared by CLEAR_FEATURE
+			 */
+
+			if (!set && halted) {
+				/*
+				 * If we have request in progress,
+				 * then complete it
+				 */
+				if (ep->req) {
+					hs_req = ep->req;
+					ep->req = NULL;
+					list_del_init(&hs_req->queue);
+					if (hs_req->req.complete) {
+						spin_unlock(&hsotg->lock);
+						usb_gadget_giveback_request(
+							&ep->ep, &hs_req->req);
+						spin_lock(&hsotg->lock);
+					}
+				}
+
+				/* If we have pending request, then start it */
+				if (!ep->req)
+					dwc2_gadget_start_next_request(ep);
+			}
+
+			break;
+
+		default:
+			return -ENOENT;
+		}
+		break;
+	default:
+		return -ENOENT;
+	}
+	return 1;
+}
+
+static void dwc2_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg);
+
+/**
+ * dwc2_hsotg_stall_ep0 - stall ep0
+ * @hsotg: The device state
+ *
+ * Set stall for ep0 as response for setup request.
+ */
+static void dwc2_hsotg_stall_ep0(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hsotg_ep *ep0 = hsotg->eps_out[0];
+	u32 reg;
+	u32 ctrl;
+
+	dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in);
+	reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0;
+
+	/*
+	 * DxEPCTL_Stall will be cleared by EP once it has
+	 * taken effect, so no need to clear later.
+	 */
+
+	ctrl = dwc2_readl(hsotg, reg);
+	ctrl |= DXEPCTL_STALL;
+	ctrl |= DXEPCTL_CNAK;
+	dwc2_writel(hsotg, ctrl, reg);
+
+	dev_dbg(hsotg->dev,
+		"written DXEPCTL=0x%08x to %08x (DXEPCTL=0x%08x)\n",
+		ctrl, reg, dwc2_readl(hsotg, reg));
+
+	 /*
+	  * complete won't be called, so we enqueue
+	  * setup request here
+	  */
+	 dwc2_hsotg_enqueue_setup(hsotg);
+}
+
+/**
+ * dwc2_hsotg_process_control - process a control request
+ * @hsotg: The device state
+ * @ctrl: The control request received
+ *
+ * The controller has received the SETUP phase of a control request, and
+ * needs to work out what to do next (and whether to pass it on to the
+ * gadget driver).
+ */
+static void dwc2_hsotg_process_control(struct dwc2_hsotg *hsotg,
+				       struct usb_ctrlrequest *ctrl)
+{
+	struct dwc2_hsotg_ep *ep0 = hsotg->eps_out[0];
+	int ret = 0;
+	u32 dcfg;
+
+	dev_dbg(hsotg->dev,
+		"ctrl Type=%02x, Req=%02x, V=%04x, I=%04x, L=%04x\n",
+		ctrl->bRequestType, ctrl->bRequest, ctrl->wValue,
+		ctrl->wIndex, ctrl->wLength);
+
+	if (ctrl->wLength == 0) {
+		ep0->dir_in = 1;
+		hsotg->ep0_state = DWC2_EP0_STATUS_IN;
+	} else if (ctrl->bRequestType & USB_DIR_IN) {
+		ep0->dir_in = 1;
+		hsotg->ep0_state = DWC2_EP0_DATA_IN;
+	} else {
+		ep0->dir_in = 0;
+		hsotg->ep0_state = DWC2_EP0_DATA_OUT;
+	}
+
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (ctrl->bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			hsotg->connected = 1;
+			dcfg = dwc2_readl(hsotg, DCFG);
+			dcfg &= ~DCFG_DEVADDR_MASK;
+			dcfg |= (le16_to_cpu(ctrl->wValue) <<
+				 DCFG_DEVADDR_SHIFT) & DCFG_DEVADDR_MASK;
+			dwc2_writel(hsotg, dcfg, DCFG);
+
+			dev_info(hsotg->dev, "new address %d\n", ctrl->wValue);
+
+			ret = dwc2_hsotg_send_reply(hsotg, ep0, NULL, 0);
+			return;
+
+		case USB_REQ_GET_STATUS:
+			ret = dwc2_hsotg_process_req_status(hsotg, ctrl);
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+		case USB_REQ_SET_FEATURE:
+			ret = dwc2_hsotg_process_req_feature(hsotg, ctrl);
+			break;
+		}
+	}
+
+	/* as a fallback, try delivering it to the driver to deal with */
+
+	if (ret == 0 && hsotg->driver) {
+		spin_unlock(&hsotg->lock);
+		ret = hsotg->driver->setup(&hsotg->gadget, ctrl);
+		spin_lock(&hsotg->lock);
+		if (ret < 0)
+			dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret);
+	}
+
+	hsotg->delayed_status = false;
+	if (ret == USB_GADGET_DELAYED_STATUS)
+		hsotg->delayed_status = true;
+
+	/*
+	 * the request is either unhandlable, or is not formatted correctly
+	 * so respond with a STALL for the status stage to indicate failure.
+	 */
+
+	if (ret < 0)
+		dwc2_hsotg_stall_ep0(hsotg);
+}
+
+/**
+ * dwc2_hsotg_complete_setup - completion of a setup transfer
+ * @ep: The endpoint the request was on.
+ * @req: The request completed.
+ *
+ * Called on completion of any requests the driver itself submitted for
+ * EP0 setup packets
+ */
+static void dwc2_hsotg_complete_setup(struct usb_ep *ep,
+				      struct usb_request *req)
+{
+	struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+
+	if (req->status < 0) {
+		dev_dbg(hsotg->dev, "%s: failed %d\n", __func__, req->status);
+		return;
+	}
+
+	spin_lock(&hsotg->lock);
+	if (req->actual == 0)
+		dwc2_hsotg_enqueue_setup(hsotg);
+	else
+		dwc2_hsotg_process_control(hsotg, req->buf);
+	spin_unlock(&hsotg->lock);
+}
+
+/**
+ * dwc2_hsotg_enqueue_setup - start a request for EP0 packets
+ * @hsotg: The device state.
+ *
+ * Enqueue a request on EP0 if necessary to received any SETUP packets
+ * received from the host.
+ */
+static void dwc2_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg)
+{
+	struct usb_request *req = hsotg->ctrl_req;
+	struct dwc2_hsotg_req *hs_req = our_req(req);
+	int ret;
+
+	dev_dbg(hsotg->dev, "%s: queueing setup request\n", __func__);
+
+	req->zero = 0;
+	req->length = 8;
+	req->buf = hsotg->ctrl_buff;
+	req->complete = dwc2_hsotg_complete_setup;
+
+	if (!list_empty(&hs_req->queue)) {
+		dev_dbg(hsotg->dev, "%s already queued???\n", __func__);
+		return;
+	}
+
+	hsotg->eps_out[0]->dir_in = 0;
+	hsotg->eps_out[0]->send_zlp = 0;
+	hsotg->ep0_state = DWC2_EP0_SETUP;
+
+	ret = dwc2_hsotg_ep_queue(&hsotg->eps_out[0]->ep, req, GFP_ATOMIC);
+	if (ret < 0) {
+		dev_err(hsotg->dev, "%s: failed queue (%d)\n", __func__, ret);
+		/*
+		 * Don't think there's much we can do other than watch the
+		 * driver fail.
+		 */
+	}
+}
+
+static void dwc2_hsotg_program_zlp(struct dwc2_hsotg *hsotg,
+				   struct dwc2_hsotg_ep *hs_ep)
+{
+	u32 ctrl;
+	u8 index = hs_ep->index;
+	u32 epctl_reg = hs_ep->dir_in ? DIEPCTL(index) : DOEPCTL(index);
+	u32 epsiz_reg = hs_ep->dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index);
+
+	if (hs_ep->dir_in)
+		dev_dbg(hsotg->dev, "Sending zero-length packet on ep%d\n",
+			index);
+	else
+		dev_dbg(hsotg->dev, "Receiving zero-length packet on ep%d\n",
+			index);
+	if (using_desc_dma(hsotg)) {
+		/* Not specific buffer needed for ep0 ZLP */
+		dma_addr_t dma = hs_ep->desc_list_dma;
+
+		if (!index)
+			dwc2_gadget_set_ep0_desc_chain(hsotg, hs_ep);
+
+		dwc2_gadget_config_nonisoc_xfer_ddma(hs_ep, dma, 0);
+	} else {
+		dwc2_writel(hsotg, DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
+			    DXEPTSIZ_XFERSIZE(0),
+			    epsiz_reg);
+	}
+
+	ctrl = dwc2_readl(hsotg, epctl_reg);
+	ctrl |= DXEPCTL_CNAK;  /* clear NAK set by core */
+	ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */
+	ctrl |= DXEPCTL_USBACTEP;
+	dwc2_writel(hsotg, ctrl, epctl_reg);
+}
+
+/**
+ * dwc2_hsotg_complete_request - complete a request given to us
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint the request was on.
+ * @hs_req: The request to complete.
+ * @result: The result code (0 => Ok, otherwise errno)
+ *
+ * The given request has finished, so call the necessary completion
+ * if it has one and then look to see if we can start a new request
+ * on the endpoint.
+ *
+ * Note, expects the ep to already be locked as appropriate.
+ */
+static void dwc2_hsotg_complete_request(struct dwc2_hsotg *hsotg,
+					struct dwc2_hsotg_ep *hs_ep,
+				       struct dwc2_hsotg_req *hs_req,
+				       int result)
+{
+	if (!hs_req) {
+		dev_dbg(hsotg->dev, "%s: nothing to complete?\n", __func__);
+		return;
+	}
+
+	dev_dbg(hsotg->dev, "complete: ep %p %s, req %p, %d => %p\n",
+		hs_ep, hs_ep->ep.name, hs_req, result, hs_req->req.complete);
+
+	/*
+	 * only replace the status if we've not already set an error
+	 * from a previous transaction
+	 */
+
+	if (hs_req->req.status == -EINPROGRESS)
+		hs_req->req.status = result;
+
+	if (using_dma(hsotg))
+		dwc2_hsotg_unmap_dma(hsotg, hs_ep, hs_req);
+
+	dwc2_hsotg_handle_unaligned_buf_complete(hsotg, hs_ep, hs_req);
+
+	hs_ep->req = NULL;
+	list_del_init(&hs_req->queue);
+
+	/*
+	 * call the complete request with the locks off, just in case the
+	 * request tries to queue more work for this endpoint.
+	 */
+
+	if (hs_req->req.complete) {
+		spin_unlock(&hsotg->lock);
+		usb_gadget_giveback_request(&hs_ep->ep, &hs_req->req);
+		spin_lock(&hsotg->lock);
+	}
+
+	/* In DDMA don't need to proceed to starting of next ISOC request */
+	if (using_desc_dma(hsotg) && hs_ep->isochronous)
+		return;
+
+	/*
+	 * Look to see if there is anything else to do. Note, the completion
+	 * of the previous request may have caused a new request to be started
+	 * so be careful when doing this.
+	 */
+
+	if (!hs_ep->req && result >= 0)
+		dwc2_gadget_start_next_request(hs_ep);
+}
+
+/*
+ * dwc2_gadget_complete_isoc_request_ddma - complete an isoc request in DDMA
+ * @hs_ep: The endpoint the request was on.
+ *
+ * Get first request from the ep queue, determine descriptor on which complete
+ * happened. SW discovers which descriptor currently in use by HW, adjusts
+ * dma_address and calculates index of completed descriptor based on the value
+ * of DEPDMA register. Update actual length of request, giveback to gadget.
+ */
+static void dwc2_gadget_complete_isoc_request_ddma(struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	struct dwc2_hsotg_req *hs_req;
+	struct usb_request *ureq;
+	u32 desc_sts;
+	u32 mask;
+
+	desc_sts = hs_ep->desc_list[hs_ep->compl_desc].status;
+
+	/* Process only descriptors with buffer status set to DMA done */
+	while ((desc_sts & DEV_DMA_BUFF_STS_MASK) >>
+		DEV_DMA_BUFF_STS_SHIFT == DEV_DMA_BUFF_STS_DMADONE) {
+
+		hs_req = get_ep_head(hs_ep);
+		if (!hs_req) {
+			dev_warn(hsotg->dev, "%s: ISOC EP queue empty\n", __func__);
+			return;
+		}
+		ureq = &hs_req->req;
+
+		/* Check completion status */
+		if ((desc_sts & DEV_DMA_STS_MASK) >> DEV_DMA_STS_SHIFT ==
+			DEV_DMA_STS_SUCC) {
+			mask = hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_MASK :
+				DEV_DMA_ISOC_RX_NBYTES_MASK;
+			ureq->actual = ureq->length - ((desc_sts & mask) >>
+				DEV_DMA_ISOC_NBYTES_SHIFT);
+
+			/* Adjust actual len for ISOC Out if len is
+			 * not align of 4
+			 */
+			if (!hs_ep->dir_in && ureq->length & 0x3)
+				ureq->actual += 4 - (ureq->length & 0x3);
+
+			/* Set actual frame number for completed transfers */
+			ureq->frame_number =
+				(desc_sts & DEV_DMA_ISOC_FRNUM_MASK) >>
+				DEV_DMA_ISOC_FRNUM_SHIFT;
+		}
+
+		dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
+
+		hs_ep->compl_desc++;
+		if (hs_ep->compl_desc > (MAX_DMA_DESC_NUM_HS_ISOC - 1))
+			hs_ep->compl_desc = 0;
+		desc_sts = hs_ep->desc_list[hs_ep->compl_desc].status;
+	}
+}
+
+/*
+ * dwc2_gadget_handle_isoc_bna - handle BNA interrupt for ISOC.
+ * @hs_ep: The isochronous endpoint.
+ *
+ * If EP ISOC OUT then need to flush RX FIFO to remove source of BNA
+ * interrupt. Reset target frame and next_desc to allow to start
+ * ISOC's on NAK interrupt for IN direction or on OUTTKNEPDIS
+ * interrupt for OUT direction.
+ */
+static void dwc2_gadget_handle_isoc_bna(struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+
+	if (!hs_ep->dir_in)
+		dwc2_flush_rx_fifo(hsotg);
+	dwc2_hsotg_complete_request(hsotg, hs_ep, get_ep_head(hs_ep), 0);
+
+	hs_ep->target_frame = TARGET_FRAME_INITIAL;
+	hs_ep->next_desc = 0;
+	hs_ep->compl_desc = 0;
+}
+
+/**
+ * dwc2_hsotg_rx_data - receive data from the FIFO for an endpoint
+ * @hsotg: The device state.
+ * @ep_idx: The endpoint index for the data
+ * @size: The size of data in the fifo, in bytes
+ *
+ * The FIFO status shows there is data to read from the FIFO for a given
+ * endpoint, so sort out whether we need to read the data into a request
+ * that has been made for that endpoint.
+ */
+static void dwc2_hsotg_rx_data(struct dwc2_hsotg *hsotg, int ep_idx, int size)
+{
+	struct dwc2_hsotg_ep *hs_ep = hsotg->eps_out[ep_idx];
+	struct dwc2_hsotg_req *hs_req = hs_ep->req;
+	int to_read;
+	int max_req;
+	int read_ptr;
+
+	if (!hs_req) {
+		u32 epctl = dwc2_readl(hsotg, DOEPCTL(ep_idx));
+		int ptr;
+
+		dev_dbg(hsotg->dev,
+			"%s: FIFO %d bytes on ep%d but no req (DXEPCTl=0x%08x)\n",
+			 __func__, size, ep_idx, epctl);
+
+		/* dump the data from the FIFO, we've nothing we can do */
+		for (ptr = 0; ptr < size; ptr += 4)
+			(void)dwc2_readl(hsotg, EPFIFO(ep_idx));
+
+		return;
+	}
+
+	to_read = size;
+	read_ptr = hs_req->req.actual;
+	max_req = hs_req->req.length - read_ptr;
+
+	dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n",
+		__func__, to_read, max_req, read_ptr, hs_req->req.length);
+
+	if (to_read > max_req) {
+		/*
+		 * more data appeared than we where willing
+		 * to deal with in this request.
+		 */
+
+		/* currently we don't deal this */
+		WARN_ON_ONCE(1);
+	}
+
+	hs_ep->total_data += to_read;
+	hs_req->req.actual += to_read;
+	to_read = DIV_ROUND_UP(to_read, 4);
+
+	/*
+	 * note, we might over-write the buffer end by 3 bytes depending on
+	 * alignment of the data.
+	 */
+	dwc2_readl_rep(hsotg, EPFIFO(ep_idx),
+		       hs_req->req.buf + read_ptr, to_read);
+}
+
+/**
+ * dwc2_hsotg_ep0_zlp - send/receive zero-length packet on control endpoint
+ * @hsotg: The device instance
+ * @dir_in: If IN zlp
+ *
+ * Generate a zero-length IN packet request for terminating a SETUP
+ * transaction.
+ *
+ * Note, since we don't write any data to the TxFIFO, then it is
+ * currently believed that we do not need to wait for any space in
+ * the TxFIFO.
+ */
+static void dwc2_hsotg_ep0_zlp(struct dwc2_hsotg *hsotg, bool dir_in)
+{
+	/* eps_out[0] is used in both directions */
+	hsotg->eps_out[0]->dir_in = dir_in;
+	hsotg->ep0_state = dir_in ? DWC2_EP0_STATUS_IN : DWC2_EP0_STATUS_OUT;
+
+	dwc2_hsotg_program_zlp(hsotg, hsotg->eps_out[0]);
+}
+
+/*
+ * dwc2_gadget_get_xfersize_ddma - get transferred bytes amount from desc
+ * @hs_ep - The endpoint on which transfer went
+ *
+ * Iterate over endpoints descriptor chain and get info on bytes remained
+ * in DMA descriptors after transfer has completed. Used for non isoc EPs.
+ */
+static unsigned int dwc2_gadget_get_xfersize_ddma(struct dwc2_hsotg_ep *hs_ep)
+{
+	const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	unsigned int bytes_rem = 0;
+	unsigned int bytes_rem_correction = 0;
+	struct dwc2_dma_desc *desc = hs_ep->desc_list;
+	int i;
+	u32 status;
+	u32 mps = hs_ep->ep.maxpacket;
+	int dir_in = hs_ep->dir_in;
+
+	if (!desc)
+		return -EINVAL;
+
+	/* Interrupt OUT EP with mps not multiple of 4 */
+	if (hs_ep->index)
+		if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4))
+			bytes_rem_correction = 4 - (mps % 4);
+
+	for (i = 0; i < hs_ep->desc_count; ++i) {
+		status = desc->status;
+		bytes_rem += status & DEV_DMA_NBYTES_MASK;
+		bytes_rem -= bytes_rem_correction;
+
+		if (status & DEV_DMA_STS_MASK)
+			dev_err(hsotg->dev, "descriptor %d closed with %x\n",
+				i, status & DEV_DMA_STS_MASK);
+
+		if (status & DEV_DMA_L)
+			break;
+
+		desc++;
+	}
+
+	return bytes_rem;
+}
+
+/**
+ * dwc2_hsotg_handle_outdone - handle receiving OutDone/SetupDone from RXFIFO
+ * @hsotg: The device instance
+ * @epnum: The endpoint received from
+ *
+ * The RXFIFO has delivered an OutDone event, which means that the data
+ * transfer for an OUT endpoint has been completed, either by a short
+ * packet or by the finish of a transfer.
+ */
+static void dwc2_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum)
+{
+	u32 epsize = dwc2_readl(hsotg, DOEPTSIZ(epnum));
+	struct dwc2_hsotg_ep *hs_ep = hsotg->eps_out[epnum];
+	struct dwc2_hsotg_req *hs_req = hs_ep->req;
+	struct usb_request *req = &hs_req->req;
+	unsigned int size_left = DXEPTSIZ_XFERSIZE_GET(epsize);
+	int result = 0;
+
+	if (!hs_req) {
+		dev_dbg(hsotg->dev, "%s: no request active\n", __func__);
+		return;
+	}
+
+	if (epnum == 0 && hsotg->ep0_state == DWC2_EP0_STATUS_OUT) {
+		dev_dbg(hsotg->dev, "zlp packet received\n");
+		dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
+		dwc2_hsotg_enqueue_setup(hsotg);
+		return;
+	}
+
+	if (using_desc_dma(hsotg))
+		size_left = dwc2_gadget_get_xfersize_ddma(hs_ep);
+
+	if (using_dma(hsotg)) {
+		unsigned int size_done;
+
+		/*
+		 * Calculate the size of the transfer by checking how much
+		 * is left in the endpoint size register and then working it
+		 * out from the amount we loaded for the transfer.
+		 *
+		 * We need to do this as DMA pointers are always 32bit aligned
+		 * so may overshoot/undershoot the transfer.
+		 */
+
+		size_done = hs_ep->size_loaded - size_left;
+		size_done += hs_ep->last_load;
+
+		req->actual = size_done;
+	}
+
+	/* if there is more request to do, schedule new transfer */
+	if (req->actual < req->length && size_left == 0) {
+		dwc2_hsotg_start_req(hsotg, hs_ep, hs_req, true);
+		return;
+	}
+
+	if (req->actual < req->length && req->short_not_ok) {
+		dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n",
+			__func__, req->actual, req->length);
+
+		/*
+		 * todo - what should we return here? there's no one else
+		 * even bothering to check the status.
+		 */
+	}
+
+	/* DDMA IN status phase will start from StsPhseRcvd interrupt */
+	if (!using_desc_dma(hsotg) && epnum == 0 &&
+	    hsotg->ep0_state == DWC2_EP0_DATA_OUT) {
+		/* Move to STATUS IN */
+		if (!hsotg->delayed_status)
+			dwc2_hsotg_ep0_zlp(hsotg, true);
+	}
+
+	/* Set actual frame number for completed transfers */
+	if (!using_desc_dma(hsotg) && hs_ep->isochronous) {
+		req->frame_number = hs_ep->target_frame;
+		dwc2_gadget_incr_frame_num(hs_ep);
+	}
+
+	dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
+}
+
+/**
+ * dwc2_hsotg_handle_rx - RX FIFO has data
+ * @hsotg: The device instance
+ *
+ * The IRQ handler has detected that the RX FIFO has some data in it
+ * that requires processing, so find out what is in there and do the
+ * appropriate read.
+ *
+ * The RXFIFO is a true FIFO, the packets coming out are still in packet
+ * chunks, so if you have x packets received on an endpoint you'll get x
+ * FIFO events delivered, each with a packet's worth of data in it.
+ *
+ * When using DMA, we should not be processing events from the RXFIFO
+ * as the actual data should be sent to the memory directly and we turn
+ * on the completion interrupts to get notifications of transfer completion.
+ */
+static void dwc2_hsotg_handle_rx(struct dwc2_hsotg *hsotg)
+{
+	u32 grxstsr = dwc2_readl(hsotg, GRXSTSP);
+	u32 epnum, status, size;
+
+	WARN_ON(using_dma(hsotg));
+
+	epnum = grxstsr & GRXSTS_EPNUM_MASK;
+	status = grxstsr & GRXSTS_PKTSTS_MASK;
+
+	size = grxstsr & GRXSTS_BYTECNT_MASK;
+	size >>= GRXSTS_BYTECNT_SHIFT;
+
+	dev_dbg(hsotg->dev, "%s: GRXSTSP=0x%08x (%d@%d)\n",
+		__func__, grxstsr, size, epnum);
+
+	switch ((status & GRXSTS_PKTSTS_MASK) >> GRXSTS_PKTSTS_SHIFT) {
+	case GRXSTS_PKTSTS_GLOBALOUTNAK:
+		dev_dbg(hsotg->dev, "GLOBALOUTNAK\n");
+		break;
+
+	case GRXSTS_PKTSTS_OUTDONE:
+		dev_dbg(hsotg->dev, "OutDone (Frame=0x%08x)\n",
+			dwc2_hsotg_read_frameno(hsotg));
+
+		if (!using_dma(hsotg))
+			dwc2_hsotg_handle_outdone(hsotg, epnum);
+		break;
+
+	case GRXSTS_PKTSTS_SETUPDONE:
+		dev_dbg(hsotg->dev,
+			"SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
+			dwc2_hsotg_read_frameno(hsotg),
+			dwc2_readl(hsotg, DOEPCTL(0)));
+		/*
+		 * Call dwc2_hsotg_handle_outdone here if it was not called from
+		 * GRXSTS_PKTSTS_OUTDONE. That is, if the core didn't
+		 * generate GRXSTS_PKTSTS_OUTDONE for setup packet.
+		 */
+		if (hsotg->ep0_state == DWC2_EP0_SETUP)
+			dwc2_hsotg_handle_outdone(hsotg, epnum);
+		break;
+
+	case GRXSTS_PKTSTS_OUTRX:
+		dwc2_hsotg_rx_data(hsotg, epnum, size);
+		break;
+
+	case GRXSTS_PKTSTS_SETUPRX:
+		dev_dbg(hsotg->dev,
+			"SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
+			dwc2_hsotg_read_frameno(hsotg),
+			dwc2_readl(hsotg, DOEPCTL(0)));
+
+		WARN_ON(hsotg->ep0_state != DWC2_EP0_SETUP);
+
+		dwc2_hsotg_rx_data(hsotg, epnum, size);
+		break;
+
+	default:
+		dev_warn(hsotg->dev, "%s: unknown status %08x\n",
+			 __func__, grxstsr);
+
+		dwc2_hsotg_dump(hsotg);
+		break;
+	}
+}
+
+/**
+ * dwc2_hsotg_ep0_mps - turn max packet size into register setting
+ * @mps: The maximum packet size in bytes.
+ */
+static u32 dwc2_hsotg_ep0_mps(unsigned int mps)
+{
+	switch (mps) {
+	case 64:
+		return D0EPCTL_MPS_64;
+	case 32:
+		return D0EPCTL_MPS_32;
+	case 16:
+		return D0EPCTL_MPS_16;
+	case 8:
+		return D0EPCTL_MPS_8;
+	}
+
+	/* bad max packet size, warn and return invalid result */
+	WARN_ON(1);
+	return (u32)-1;
+}
+
+/**
+ * dwc2_hsotg_set_ep_maxpacket - set endpoint's max-packet field
+ * @hsotg: The driver state.
+ * @ep: The index number of the endpoint
+ * @mps: The maximum packet size in bytes
+ * @mc: The multicount value
+ * @dir_in: True if direction is in.
+ *
+ * Configure the maximum packet size for the given endpoint, updating
+ * the hardware control registers to reflect this.
+ */
+static void dwc2_hsotg_set_ep_maxpacket(struct dwc2_hsotg *hsotg,
+					unsigned int ep, unsigned int mps,
+					unsigned int mc, unsigned int dir_in)
+{
+	struct dwc2_hsotg_ep *hs_ep;
+	u32 reg;
+
+	hs_ep = index_to_ep(hsotg, ep, dir_in);
+	if (!hs_ep)
+		return;
+
+	if (ep == 0) {
+		u32 mps_bytes = mps;
+
+		/* EP0 is a special case */
+		mps = dwc2_hsotg_ep0_mps(mps_bytes);
+		if (mps > 3)
+			goto bad_mps;
+		hs_ep->ep.maxpacket = mps_bytes;
+		hs_ep->mc = 1;
+	} else {
+		if (mps > 1024)
+			goto bad_mps;
+		hs_ep->mc = mc;
+		if (mc > 3)
+			goto bad_mps;
+		hs_ep->ep.maxpacket = mps;
+	}
+
+	if (dir_in) {
+		reg = dwc2_readl(hsotg, DIEPCTL(ep));
+		reg &= ~DXEPCTL_MPS_MASK;
+		reg |= mps;
+		dwc2_writel(hsotg, reg, DIEPCTL(ep));
+	} else {
+		reg = dwc2_readl(hsotg, DOEPCTL(ep));
+		reg &= ~DXEPCTL_MPS_MASK;
+		reg |= mps;
+		dwc2_writel(hsotg, reg, DOEPCTL(ep));
+	}
+
+	return;
+
+bad_mps:
+	dev_err(hsotg->dev, "ep%d: bad mps of %d\n", ep, mps);
+}
+
+/**
+ * dwc2_hsotg_txfifo_flush - flush Tx FIFO
+ * @hsotg: The driver state
+ * @idx: The index for the endpoint (0..15)
+ */
+static void dwc2_hsotg_txfifo_flush(struct dwc2_hsotg *hsotg, unsigned int idx)
+{
+	dwc2_writel(hsotg, GRSTCTL_TXFNUM(idx) | GRSTCTL_TXFFLSH,
+		    GRSTCTL);
+
+	/* wait until the fifo is flushed */
+	if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_TXFFLSH, 100))
+		dev_warn(hsotg->dev, "%s: timeout flushing fifo GRSTCTL_TXFFLSH\n",
+			 __func__);
+}
+
+/**
+ * dwc2_hsotg_trytx - check to see if anything needs transmitting
+ * @hsotg: The driver state
+ * @hs_ep: The driver endpoint to check.
+ *
+ * Check to see if there is a request that has data to send, and if so
+ * make an attempt to write data into the FIFO.
+ */
+static int dwc2_hsotg_trytx(struct dwc2_hsotg *hsotg,
+			    struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg_req *hs_req = hs_ep->req;
+
+	if (!hs_ep->dir_in || !hs_req) {
+		/**
+		 * if request is not enqueued, we disable interrupts
+		 * for endpoints, excepting ep0
+		 */
+		if (hs_ep->index != 0)
+			dwc2_hsotg_ctrl_epint(hsotg, hs_ep->index,
+					      hs_ep->dir_in, 0);
+		return 0;
+	}
+
+	if (hs_req->req.actual < hs_req->req.length) {
+		dev_dbg(hsotg->dev, "trying to write more for ep%d\n",
+			hs_ep->index);
+		return dwc2_hsotg_write_fifo(hsotg, hs_ep, hs_req);
+	}
+
+	return 0;
+}
+
+/**
+ * dwc2_hsotg_complete_in - complete IN transfer
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint that has just completed.
+ *
+ * An IN transfer has been completed, update the transfer's state and then
+ * call the relevant completion routines.
+ */
+static void dwc2_hsotg_complete_in(struct dwc2_hsotg *hsotg,
+				   struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg_req *hs_req = hs_ep->req;
+	u32 epsize = dwc2_readl(hsotg, DIEPTSIZ(hs_ep->index));
+	int size_left, size_done;
+
+	if (!hs_req) {
+		dev_dbg(hsotg->dev, "XferCompl but no req\n");
+		return;
+	}
+
+	/* Finish ZLP handling for IN EP0 transactions */
+	if (hs_ep->index == 0 && hsotg->ep0_state == DWC2_EP0_STATUS_IN) {
+		dev_dbg(hsotg->dev, "zlp packet sent\n");
+
+		/*
+		 * While send zlp for DWC2_EP0_STATUS_IN EP direction was
+		 * changed to IN. Change back to complete OUT transfer request
+		 */
+		hs_ep->dir_in = 0;
+
+		dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
+		if (hsotg->test_mode) {
+			int ret;
+
+			ret = dwc2_hsotg_set_test_mode(hsotg, hsotg->test_mode);
+			if (ret < 0) {
+				dev_dbg(hsotg->dev, "Invalid Test #%d\n",
+					hsotg->test_mode);
+				dwc2_hsotg_stall_ep0(hsotg);
+				return;
+			}
+		}
+		dwc2_hsotg_enqueue_setup(hsotg);
+		return;
+	}
+
+	/*
+	 * Calculate the size of the transfer by checking how much is left
+	 * in the endpoint size register and then working it out from
+	 * the amount we loaded for the transfer.
+	 *
+	 * We do this even for DMA, as the transfer may have incremented
+	 * past the end of the buffer (DMA transfers are always 32bit
+	 * aligned).
+	 */
+	if (using_desc_dma(hsotg)) {
+		size_left = dwc2_gadget_get_xfersize_ddma(hs_ep);
+		if (size_left < 0)
+			dev_err(hsotg->dev, "error parsing DDMA results %d\n",
+				size_left);
+	} else {
+		size_left = DXEPTSIZ_XFERSIZE_GET(epsize);
+	}
+
+	size_done = hs_ep->size_loaded - size_left;
+	size_done += hs_ep->last_load;
+
+	if (hs_req->req.actual != size_done)
+		dev_dbg(hsotg->dev, "%s: adjusting size done %d => %d\n",
+			__func__, hs_req->req.actual, size_done);
+
+	hs_req->req.actual = size_done;
+	dev_dbg(hsotg->dev, "req->length:%d req->actual:%d req->zero:%d\n",
+		hs_req->req.length, hs_req->req.actual, hs_req->req.zero);
+
+	if (!size_left && hs_req->req.actual < hs_req->req.length) {
+		dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__);
+		dwc2_hsotg_start_req(hsotg, hs_ep, hs_req, true);
+		return;
+	}
+
+	/* Zlp for all endpoints in non DDMA, for ep0 only in DATA IN stage */
+	if (hs_ep->send_zlp) {
+		hs_ep->send_zlp = 0;
+		if (!using_desc_dma(hsotg)) {
+			dwc2_hsotg_program_zlp(hsotg, hs_ep);
+			/* transfer will be completed on next complete interrupt */
+			return;
+		}
+	}
+
+	if (hs_ep->index == 0 && hsotg->ep0_state == DWC2_EP0_DATA_IN) {
+		/* Move to STATUS OUT */
+		dwc2_hsotg_ep0_zlp(hsotg, false);
+		return;
+	}
+
+	/* Set actual frame number for completed transfers */
+	if (!using_desc_dma(hsotg) && hs_ep->isochronous) {
+		hs_req->req.frame_number = hs_ep->target_frame;
+		dwc2_gadget_incr_frame_num(hs_ep);
+	}
+
+	dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
+}
+
+/**
+ * dwc2_gadget_read_ep_interrupts - reads interrupts for given ep
+ * @hsotg: The device state.
+ * @idx: Index of ep.
+ * @dir_in: Endpoint direction 1-in 0-out.
+ *
+ * Reads for endpoint with given index and direction, by masking
+ * epint_reg with coresponding mask.
+ */
+static u32 dwc2_gadget_read_ep_interrupts(struct dwc2_hsotg *hsotg,
+					  unsigned int idx, int dir_in)
+{
+	u32 epmsk_reg = dir_in ? DIEPMSK : DOEPMSK;
+	u32 epint_reg = dir_in ? DIEPINT(idx) : DOEPINT(idx);
+	u32 ints;
+	u32 mask;
+	u32 diepempmsk;
+
+	mask = dwc2_readl(hsotg, epmsk_reg);
+	diepempmsk = dwc2_readl(hsotg, DIEPEMPMSK);
+	mask |= ((diepempmsk >> idx) & 0x1) ? DIEPMSK_TXFIFOEMPTY : 0;
+	mask |= DXEPINT_SETUP_RCVD;
+
+	ints = dwc2_readl(hsotg, epint_reg);
+	ints &= mask;
+	return ints;
+}
+
+/**
+ * dwc2_gadget_handle_ep_disabled - handle DXEPINT_EPDISBLD
+ * @hs_ep: The endpoint on which interrupt is asserted.
+ *
+ * This interrupt indicates that the endpoint has been disabled per the
+ * application's request.
+ *
+ * For IN endpoints flushes txfifo, in case of BULK clears DCTL_CGNPINNAK,
+ * in case of ISOC completes current request.
+ *
+ * For ISOC-OUT endpoints completes expired requests. If there is remaining
+ * request starts it.
+ */
+static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	struct dwc2_hsotg_req *hs_req;
+	unsigned char idx = hs_ep->index;
+	int dir_in = hs_ep->dir_in;
+	u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx);
+	int dctl = dwc2_readl(hsotg, DCTL);
+
+	dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__);
+
+	if (dir_in) {
+		int epctl = dwc2_readl(hsotg, epctl_reg);
+
+		dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index);
+
+		if ((epctl & DXEPCTL_STALL) && (epctl & DXEPCTL_EPTYPE_BULK)) {
+			int dctl = dwc2_readl(hsotg, DCTL);
+
+			dctl |= DCTL_CGNPINNAK;
+			dwc2_writel(hsotg, dctl, DCTL);
+		}
+	} else {
+
+		if (dctl & DCTL_GOUTNAKSTS) {
+			dctl |= DCTL_CGOUTNAK;
+			dwc2_writel(hsotg, dctl, DCTL);
+		}
+	}
+
+	if (!hs_ep->isochronous)
+		return;
+
+	if (list_empty(&hs_ep->queue)) {
+		dev_dbg(hsotg->dev, "%s: complete_ep 0x%p, ep->queue empty!\n",
+			__func__, hs_ep);
+		return;
+	}
+
+	do {
+		hs_req = get_ep_head(hs_ep);
+		if (hs_req) {
+			hs_req->req.frame_number = hs_ep->target_frame;
+			hs_req->req.actual = 0;
+			dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req,
+						    -ENODATA);
+		}
+		dwc2_gadget_incr_frame_num(hs_ep);
+		/* Update current frame number value. */
+		hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg);
+	} while (dwc2_gadget_target_frame_elapsed(hs_ep));
+}
+
+/**
+ * dwc2_gadget_handle_out_token_ep_disabled - handle DXEPINT_OUTTKNEPDIS
+ * @ep: The endpoint on which interrupt is asserted.
+ *
+ * This is starting point for ISOC-OUT transfer, synchronization done with
+ * first out token received from host while corresponding EP is disabled.
+ *
+ * Device does not know initial frame in which out token will come. For this
+ * HW generates OUTTKNEPDIS - out token is received while EP is disabled. Upon
+ * getting this interrupt SW starts calculation for next transfer frame.
+ */
+static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep)
+{
+	struct dwc2_hsotg *hsotg = ep->parent;
+	struct dwc2_hsotg_req *hs_req;
+	int dir_in = ep->dir_in;
+
+	if (dir_in || !ep->isochronous)
+		return;
+
+	if (using_desc_dma(hsotg)) {
+		if (ep->target_frame == TARGET_FRAME_INITIAL) {
+			/* Start first ISO Out */
+			ep->target_frame = hsotg->frame_number;
+			dwc2_gadget_start_isoc_ddma(ep);
+		}
+		return;
+	}
+
+	if (ep->target_frame == TARGET_FRAME_INITIAL) {
+		u32 ctrl;
+
+		ep->target_frame = hsotg->frame_number;
+		if (ep->interval > 1) {
+			ctrl = dwc2_readl(hsotg, DOEPCTL(ep->index));
+			if (ep->target_frame & 0x1)
+				ctrl |= DXEPCTL_SETODDFR;
+			else
+				ctrl |= DXEPCTL_SETEVENFR;
+
+			dwc2_writel(hsotg, ctrl, DOEPCTL(ep->index));
+		}
+	}
+
+	while (dwc2_gadget_target_frame_elapsed(ep)) {
+		hs_req = get_ep_head(ep);
+		if (hs_req) {
+			hs_req->req.frame_number = ep->target_frame;
+			hs_req->req.actual = 0;
+			dwc2_hsotg_complete_request(hsotg, ep, hs_req, -ENODATA);
+		}
+
+		dwc2_gadget_incr_frame_num(ep);
+		/* Update current frame number value. */
+		hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg);
+	}
+
+	if (!ep->req)
+		dwc2_gadget_start_next_request(ep);
+
+}
+
+static void dwc2_hsotg_ep_stop_xfr(struct dwc2_hsotg *hsotg,
+				   struct dwc2_hsotg_ep *hs_ep);
+
+/**
+ * dwc2_gadget_handle_nak - handle NAK interrupt
+ * @hs_ep: The endpoint on which interrupt is asserted.
+ *
+ * This is starting point for ISOC-IN transfer, synchronization done with
+ * first IN token received from host while corresponding EP is disabled.
+ *
+ * Device does not know when first one token will arrive from host. On first
+ * token arrival HW generates 2 interrupts: 'in token received while FIFO empty'
+ * and 'NAK'. NAK interrupt for ISOC-IN means that token has arrived and ZLP was
+ * sent in response to that as there was no data in FIFO. SW is basing on this
+ * interrupt to obtain frame in which token has come and then based on the
+ * interval calculates next frame for transfer.
+ */
+static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	struct dwc2_hsotg_req *hs_req;
+	int dir_in = hs_ep->dir_in;
+	u32 ctrl;
+
+	if (!dir_in || !hs_ep->isochronous)
+		return;
+
+	if (hs_ep->target_frame == TARGET_FRAME_INITIAL) {
+
+		if (using_desc_dma(hsotg)) {
+			hs_ep->target_frame = hsotg->frame_number;
+			dwc2_gadget_incr_frame_num(hs_ep);
+
+			/* In service interval mode target_frame must
+			 * be set to last (u)frame of the service interval.
+			 */
+			if (hsotg->params.service_interval) {
+				/* Set target_frame to the first (u)frame of
+				 * the service interval
+				 */
+				hs_ep->target_frame &= ~hs_ep->interval + 1;
+
+				/* Set target_frame to the last (u)frame of
+				 * the service interval
+				 */
+				dwc2_gadget_incr_frame_num(hs_ep);
+				dwc2_gadget_dec_frame_num_by_one(hs_ep);
+			}
+
+			dwc2_gadget_start_isoc_ddma(hs_ep);
+			return;
+		}
+
+		hs_ep->target_frame = hsotg->frame_number;
+		if (hs_ep->interval > 1) {
+			u32 ctrl = dwc2_readl(hsotg,
+					      DIEPCTL(hs_ep->index));
+			if (hs_ep->target_frame & 0x1)
+				ctrl |= DXEPCTL_SETODDFR;
+			else
+				ctrl |= DXEPCTL_SETEVENFR;
+
+			dwc2_writel(hsotg, ctrl, DIEPCTL(hs_ep->index));
+		}
+	}
+
+	if (using_desc_dma(hsotg))
+		return;
+
+	ctrl = dwc2_readl(hsotg, DIEPCTL(hs_ep->index));
+	if (ctrl & DXEPCTL_EPENA)
+		dwc2_hsotg_ep_stop_xfr(hsotg, hs_ep);
+	else
+		dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index);
+
+	while (dwc2_gadget_target_frame_elapsed(hs_ep)) {
+		hs_req = get_ep_head(hs_ep);
+		if (hs_req) {
+			hs_req->req.frame_number = hs_ep->target_frame;
+			hs_req->req.actual = 0;
+			dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA);
+		}
+
+		dwc2_gadget_incr_frame_num(hs_ep);
+		/* Update current frame number value. */
+		hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg);
+	}
+
+	if (!hs_ep->req)
+		dwc2_gadget_start_next_request(hs_ep);
+}
+
+/**
+ * dwc2_hsotg_epint - handle an in/out endpoint interrupt
+ * @hsotg: The driver state
+ * @idx: The index for the endpoint (0..15)
+ * @dir_in: Set if this is an IN endpoint
+ *
+ * Process and clear any interrupt pending for an individual endpoint
+ */
+static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx,
+			     int dir_in)
+{
+	struct dwc2_hsotg_ep *hs_ep = index_to_ep(hsotg, idx, dir_in);
+	u32 epint_reg = dir_in ? DIEPINT(idx) : DOEPINT(idx);
+	u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx);
+	u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx);
+	u32 ints;
+
+	ints = dwc2_gadget_read_ep_interrupts(hsotg, idx, dir_in);
+
+	/* Clear endpoint interrupts */
+	dwc2_writel(hsotg, ints, epint_reg);
+
+	if (!hs_ep) {
+		dev_err(hsotg->dev, "%s:Interrupt for unconfigured ep%d(%s)\n",
+			__func__, idx, dir_in ? "in" : "out");
+		return;
+	}
+
+	dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n",
+		__func__, idx, dir_in ? "in" : "out", ints);
+
+	/* Don't process XferCompl interrupt if it is a setup packet */
+	if (idx == 0 && (ints & (DXEPINT_SETUP | DXEPINT_SETUP_RCVD)))
+		ints &= ~DXEPINT_XFERCOMPL;
+
+	/*
+	 * Don't process XferCompl interrupt in DDMA if EP0 is still in SETUP
+	 * stage and xfercomplete was generated without SETUP phase done
+	 * interrupt. SW should parse received setup packet only after host's
+	 * exit from setup phase of control transfer.
+	 */
+	if (using_desc_dma(hsotg) && idx == 0 && !hs_ep->dir_in &&
+	    hsotg->ep0_state == DWC2_EP0_SETUP && !(ints & DXEPINT_SETUP))
+		ints &= ~DXEPINT_XFERCOMPL;
+
+	if (ints & DXEPINT_XFERCOMPL) {
+		dev_dbg(hsotg->dev,
+			"%s: XferCompl: DxEPCTL=0x%08x, DXEPTSIZ=%08x\n",
+			__func__, dwc2_readl(hsotg, epctl_reg),
+			dwc2_readl(hsotg, epsiz_reg));
+
+		/* In DDMA handle isochronous requests separately */
+		if (using_desc_dma(hsotg) && hs_ep->isochronous) {
+			dwc2_gadget_complete_isoc_request_ddma(hs_ep);
+		} else if (dir_in) {
+			/*
+			 * We get OutDone from the FIFO, so we only
+			 * need to look at completing IN requests here
+			 * if operating slave mode
+			 */
+			if (!hs_ep->isochronous || !(ints & DXEPINT_NAKINTRPT))
+				dwc2_hsotg_complete_in(hsotg, hs_ep);
+
+			if (idx == 0 && !hs_ep->req)
+				dwc2_hsotg_enqueue_setup(hsotg);
+		} else if (using_dma(hsotg)) {
+			/*
+			 * We're using DMA, we need to fire an OutDone here
+			 * as we ignore the RXFIFO.
+			 */
+			if (!hs_ep->isochronous || !(ints & DXEPINT_OUTTKNEPDIS))
+				dwc2_hsotg_handle_outdone(hsotg, idx);
+		}
+	}
+
+	if (ints & DXEPINT_EPDISBLD)
+		dwc2_gadget_handle_ep_disabled(hs_ep);
+
+	if (ints & DXEPINT_OUTTKNEPDIS)
+		dwc2_gadget_handle_out_token_ep_disabled(hs_ep);
+
+	if (ints & DXEPINT_NAKINTRPT)
+		dwc2_gadget_handle_nak(hs_ep);
+
+	if (ints & DXEPINT_AHBERR)
+		dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__);
+
+	if (ints & DXEPINT_SETUP) {  /* Setup or Timeout */
+		dev_dbg(hsotg->dev, "%s: Setup/Timeout\n",  __func__);
+
+		if (using_dma(hsotg) && idx == 0) {
+			/*
+			 * this is the notification we've received a
+			 * setup packet. In non-DMA mode we'd get this
+			 * from the RXFIFO, instead we need to process
+			 * the setup here.
+			 */
+
+			if (dir_in)
+				WARN_ON_ONCE(1);
+			else
+				dwc2_hsotg_handle_outdone(hsotg, 0);
+		}
+	}
+
+	if (ints & DXEPINT_STSPHSERCVD) {
+		dev_dbg(hsotg->dev, "%s: StsPhseRcvd\n", __func__);
+
+		/* Safety check EP0 state when STSPHSERCVD asserted */
+		if (hsotg->ep0_state == DWC2_EP0_DATA_OUT) {
+			/* Move to STATUS IN for DDMA */
+			if (using_desc_dma(hsotg)) {
+				if (!hsotg->delayed_status)
+					dwc2_hsotg_ep0_zlp(hsotg, true);
+				else
+				/* In case of 3 stage Control Write with delayed
+				 * status, when Status IN transfer started
+				 * before STSPHSERCVD asserted, NAKSTS bit not
+				 * cleared by CNAK in dwc2_hsotg_start_req()
+				 * function. Clear now NAKSTS to allow complete
+				 * transfer.
+				 */
+					dwc2_set_bit(hsotg, DIEPCTL(0),
+						     DXEPCTL_CNAK);
+			}
+		}
+
+	}
+
+	if (ints & DXEPINT_BACK2BACKSETUP)
+		dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);
+
+	if (ints & DXEPINT_BNAINTR) {
+		dev_dbg(hsotg->dev, "%s: BNA interrupt\n", __func__);
+		if (hs_ep->isochronous)
+			dwc2_gadget_handle_isoc_bna(hs_ep);
+	}
+
+	if (dir_in && !hs_ep->isochronous) {
+		/* not sure if this is important, but we'll clear it anyway */
+		if (ints & DXEPINT_INTKNTXFEMP) {
+			dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n",
+				__func__, idx);
+		}
+
+		/* this probably means something bad is happening */
+		if (ints & DXEPINT_INTKNEPMIS) {
+			dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n",
+				 __func__, idx);
+		}
+
+		/* FIFO has space or is empty (see GAHBCFG) */
+		if (hsotg->dedicated_fifos &&
+		    ints & DXEPINT_TXFEMP) {
+			dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n",
+				__func__, idx);
+			if (!using_dma(hsotg))
+				dwc2_hsotg_trytx(hsotg, hs_ep);
+		}
+	}
+}
+
+/**
+ * dwc2_hsotg_irq_enumdone - Handle EnumDone interrupt (enumeration done)
+ * @hsotg: The device state.
+ *
+ * Handle updating the device settings after the enumeration phase has
+ * been completed.
+ */
+static void dwc2_hsotg_irq_enumdone(struct dwc2_hsotg *hsotg)
+{
+	u32 dsts = dwc2_readl(hsotg, DSTS);
+	int ep0_mps = 0, ep_mps = 8;
+
+	/*
+	 * This should signal the finish of the enumeration phase
+	 * of the USB handshaking, so we should now know what rate
+	 * we connected at.
+	 */
+
+	dev_dbg(hsotg->dev, "EnumDone (DSTS=0x%08x)\n", dsts);
+
+	/*
+	 * note, since we're limited by the size of transfer on EP0, and
+	 * it seems IN transfers must be a even number of packets we do
+	 * not advertise a 64byte MPS on EP0.
+	 */
+
+	/* catch both EnumSpd_FS and EnumSpd_FS48 */
+	switch ((dsts & DSTS_ENUMSPD_MASK) >> DSTS_ENUMSPD_SHIFT) {
+	case DSTS_ENUMSPD_FS:
+	case DSTS_ENUMSPD_FS48:
+		hsotg->gadget.speed = USB_SPEED_FULL;
+		ep0_mps = EP0_MPS_LIMIT;
+		ep_mps = 1023;
+		break;
+
+	case DSTS_ENUMSPD_HS:
+		hsotg->gadget.speed = USB_SPEED_HIGH;
+		ep0_mps = EP0_MPS_LIMIT;
+		ep_mps = 1024;
+		break;
+
+	case DSTS_ENUMSPD_LS:
+		hsotg->gadget.speed = USB_SPEED_LOW;
+		ep0_mps = 8;
+		ep_mps = 8;
+		/*
+		 * note, we don't actually support LS in this driver at the
+		 * moment, and the documentation seems to imply that it isn't
+		 * supported by the PHYs on some of the devices.
+		 */
+		break;
+	}
+	dev_info(hsotg->dev, "new device is %s\n",
+		 usb_speed_string(hsotg->gadget.speed));
+
+	/*
+	 * we should now know the maximum packet size for an
+	 * endpoint, so set the endpoints to a default value.
+	 */
+
+	if (ep0_mps) {
+		int i;
+		/* Initialize ep0 for both in and out directions */
+		dwc2_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps, 0, 1);
+		dwc2_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps, 0, 0);
+		for (i = 1; i < hsotg->num_of_eps; i++) {
+			if (hsotg->eps_in[i])
+				dwc2_hsotg_set_ep_maxpacket(hsotg, i, ep_mps,
+							    0, 1);
+			if (hsotg->eps_out[i])
+				dwc2_hsotg_set_ep_maxpacket(hsotg, i, ep_mps,
+							    0, 0);
+		}
+	}
+
+	/* ensure after enumeration our EP0 is active */
+
+	dwc2_hsotg_enqueue_setup(hsotg);
+
+	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+		dwc2_readl(hsotg, DIEPCTL0),
+		dwc2_readl(hsotg, DOEPCTL0));
+}
+
+/**
+ * kill_all_requests - remove all requests from the endpoint's queue
+ * @hsotg: The device state.
+ * @ep: The endpoint the requests may be on.
+ * @result: The result code to use.
+ *
+ * Go through the requests on the given endpoint and mark them
+ * completed with the given result code.
+ */
+static void kill_all_requests(struct dwc2_hsotg *hsotg,
+			      struct dwc2_hsotg_ep *ep,
+			      int result)
+{
+	unsigned int size;
+
+	ep->req = NULL;
+
+	while (!list_empty(&ep->queue)) {
+		struct dwc2_hsotg_req *req = get_ep_head(ep);
+
+		dwc2_hsotg_complete_request(hsotg, ep, req, result);
+	}
+
+	if (!hsotg->dedicated_fifos)
+		return;
+	size = (dwc2_readl(hsotg, DTXFSTS(ep->fifo_index)) & 0xffff) * 4;
+	if (size < ep->fifo_size)
+		dwc2_hsotg_txfifo_flush(hsotg, ep->fifo_index);
+}
+
+/**
+ * dwc2_hsotg_disconnect - disconnect service
+ * @hsotg: The device state.
+ *
+ * The device has been disconnected. Remove all current
+ * transactions and signal the gadget driver that this
+ * has happened.
+ */
+void dwc2_hsotg_disconnect(struct dwc2_hsotg *hsotg)
+{
+	unsigned int ep;
+
+	if (!hsotg->connected)
+		return;
+
+	hsotg->connected = 0;
+	hsotg->test_mode = 0;
+
+	/* all endpoints should be shutdown */
+	for (ep = 0; ep < hsotg->num_of_eps; ep++) {
+		if (hsotg->eps_in[ep])
+			kill_all_requests(hsotg, hsotg->eps_in[ep],
+					  -ESHUTDOWN);
+		if (hsotg->eps_out[ep])
+			kill_all_requests(hsotg, hsotg->eps_out[ep],
+					  -ESHUTDOWN);
+	}
+
+	call_gadget(hsotg, disconnect);
+	hsotg->lx_state = DWC2_L3;
+
+	usb_gadget_set_state(&hsotg->gadget, USB_STATE_NOTATTACHED);
+}
+
+/**
+ * dwc2_hsotg_irq_fifoempty - TX FIFO empty interrupt handler
+ * @hsotg: The device state:
+ * @periodic: True if this is a periodic FIFO interrupt
+ */
+static void dwc2_hsotg_irq_fifoempty(struct dwc2_hsotg *hsotg, bool periodic)
+{
+	struct dwc2_hsotg_ep *ep;
+	int epno, ret;
+
+	/* look through for any more data to transmit */
+	for (epno = 0; epno < hsotg->num_of_eps; epno++) {
+		ep = index_to_ep(hsotg, epno, 1);
+
+		if (!ep)
+			continue;
+
+		if (!ep->dir_in)
+			continue;
+
+		if ((periodic && !ep->periodic) ||
+		    (!periodic && ep->periodic))
+			continue;
+
+		ret = dwc2_hsotg_trytx(hsotg, ep);
+		if (ret < 0)
+			break;
+	}
+}
+
+/* IRQ flags which will trigger a retry around the IRQ loop */
+#define IRQ_RETRY_MASK (GINTSTS_NPTXFEMP | \
+			GINTSTS_PTXFEMP |  \
+			GINTSTS_RXFLVL)
+
+static int dwc2_hsotg_ep_disable(struct usb_ep *ep);
+/**
+ * dwc2_hsotg_core_init_disconnected - issue softreset to the core
+ * @hsotg: The device state
+ * @is_usb_reset: Usb resetting flag
+ *
+ * Issue a soft reset to the core, and await the core finishing it.
+ */
+void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
+				       bool is_usb_reset)
+{
+	u32 intmsk;
+	u32 val;
+	u32 usbcfg;
+	u32 dcfg = 0;
+	int ep;
+
+	/* Kill any ep0 requests as controller will be reinitialized */
+	kill_all_requests(hsotg, hsotg->eps_out[0], -ECONNRESET);
+
+	if (!is_usb_reset) {
+		if (dwc2_core_reset(hsotg, true))
+			return;
+	} else {
+		/* all endpoints should be shutdown */
+		for (ep = 1; ep < hsotg->num_of_eps; ep++) {
+			if (hsotg->eps_in[ep])
+				dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep);
+			if (hsotg->eps_out[ep])
+				dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep);
+		}
+	}
+
+	/*
+	 * we must now enable ep0 ready for host detection and then
+	 * set configuration.
+	 */
+
+	/* keep other bits untouched (so e.g. forced modes are not lost) */
+	usbcfg = dwc2_readl(hsotg, GUSBCFG);
+	usbcfg &= ~GUSBCFG_TOUTCAL_MASK;
+	usbcfg |= GUSBCFG_TOUTCAL(7);
+
+	/* remove the HNP/SRP and set the PHY */
+	usbcfg &= ~(GUSBCFG_SRPCAP | GUSBCFG_HNPCAP);
+        dwc2_writel(hsotg, usbcfg, GUSBCFG);
+
+	dwc2_phy_init(hsotg, true);
+
+	dwc2_hsotg_init_fifo(hsotg);
+
+	if (!is_usb_reset)
+		dwc2_set_bit(hsotg, DCTL, DCTL_SFTDISCON);
+
+	dcfg |= DCFG_EPMISCNT(1);
+
+	switch (hsotg->params.speed) {
+	case DWC2_SPEED_PARAM_LOW:
+		dcfg |= DCFG_DEVSPD_LS;
+		break;
+	case DWC2_SPEED_PARAM_FULL:
+		if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS)
+			dcfg |= DCFG_DEVSPD_FS48;
+		else
+			dcfg |= DCFG_DEVSPD_FS;
+		break;
+	default:
+		dcfg |= DCFG_DEVSPD_HS;
+	}
+
+	if (hsotg->params.ipg_isoc_en)
+		dcfg |= DCFG_IPG_ISOC_SUPPORDED;
+
+	dwc2_writel(hsotg, dcfg,  DCFG);
+
+	/* Clear any pending OTG interrupts */
+	dwc2_writel(hsotg, 0xffffffff, GOTGINT);
+
+	/* Clear any pending interrupts */
+	dwc2_writel(hsotg, 0xffffffff, GINTSTS);
+	intmsk = GINTSTS_ERLYSUSP | GINTSTS_SESSREQINT |
+		GINTSTS_GOUTNAKEFF | GINTSTS_GINNAKEFF |
+		GINTSTS_USBRST | GINTSTS_RESETDET |
+		GINTSTS_ENUMDONE | GINTSTS_OTGINT |
+		GINTSTS_USBSUSP | GINTSTS_WKUPINT |
+		GINTSTS_LPMTRANRCVD;
+
+	if (!using_desc_dma(hsotg))
+		intmsk |= GINTSTS_INCOMPL_SOIN | GINTSTS_INCOMPL_SOOUT;
+
+	if (!hsotg->params.external_id_pin_ctl)
+		intmsk |= GINTSTS_CONIDSTSCHNG;
+
+	dwc2_writel(hsotg, intmsk, GINTMSK);
+
+	if (using_dma(hsotg)) {
+		dwc2_writel(hsotg, GAHBCFG_GLBL_INTR_EN | GAHBCFG_DMA_EN |
+			    hsotg->params.ahbcfg,
+			    GAHBCFG);
+
+		/* Set DDMA mode support in the core if needed */
+		if (using_desc_dma(hsotg))
+			dwc2_set_bit(hsotg, DCFG, DCFG_DESCDMA_EN);
+
+	} else {
+		dwc2_writel(hsotg, ((hsotg->dedicated_fifos) ?
+						(GAHBCFG_NP_TXF_EMP_LVL |
+						 GAHBCFG_P_TXF_EMP_LVL) : 0) |
+			    GAHBCFG_GLBL_INTR_EN, GAHBCFG);
+	}
+
+	/*
+	 * If INTknTXFEmpMsk is enabled, it's important to disable ep interrupts
+	 * when we have no data to transfer. Otherwise we get being flooded by
+	 * interrupts.
+	 */
+
+	dwc2_writel(hsotg, ((hsotg->dedicated_fifos && !using_dma(hsotg)) ?
+		DIEPMSK_TXFIFOEMPTY | DIEPMSK_INTKNTXFEMPMSK : 0) |
+		DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK |
+		DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK,
+		DIEPMSK);
+
+	/*
+	 * don't need XferCompl, we get that from RXFIFO in slave mode. In
+	 * DMA mode we may need this and StsPhseRcvd.
+	 */
+	dwc2_writel(hsotg, (using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK |
+		DOEPMSK_STSPHSERCVDMSK) : 0) |
+		DOEPMSK_EPDISBLDMSK | DOEPMSK_AHBERRMSK |
+		DOEPMSK_SETUPMSK,
+		DOEPMSK);
+
+	/* Enable BNA interrupt for DDMA */
+	if (using_desc_dma(hsotg)) {
+		dwc2_set_bit(hsotg, DOEPMSK, DOEPMSK_BNAMSK);
+		dwc2_set_bit(hsotg, DIEPMSK, DIEPMSK_BNAININTRMSK);
+	}
+
+	/* Enable Service Interval mode if supported */
+	if (using_desc_dma(hsotg) && hsotg->params.service_interval)
+		dwc2_set_bit(hsotg, DCTL, DCTL_SERVICE_INTERVAL_SUPPORTED);
+
+	dwc2_writel(hsotg, 0, DAINTMSK);
+
+	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+		dwc2_readl(hsotg, DIEPCTL0),
+		dwc2_readl(hsotg, DOEPCTL0));
+
+	/* enable in and out endpoint interrupts */
+	dwc2_hsotg_en_gsint(hsotg, GINTSTS_OEPINT | GINTSTS_IEPINT);
+
+	/*
+	 * Enable the RXFIFO when in slave mode, as this is how we collect
+	 * the data. In DMA mode, we get events from the FIFO but also
+	 * things we cannot process, so do not use it.
+	 */
+	if (!using_dma(hsotg))
+		dwc2_hsotg_en_gsint(hsotg, GINTSTS_RXFLVL);
+
+	/* Enable interrupts for EP0 in and out */
+	dwc2_hsotg_ctrl_epint(hsotg, 0, 0, 1);
+	dwc2_hsotg_ctrl_epint(hsotg, 0, 1, 1);
+
+	if (!is_usb_reset) {
+		dwc2_set_bit(hsotg, DCTL, DCTL_PWRONPRGDONE);
+		udelay(10);  /* see openiboot */
+		dwc2_clear_bit(hsotg, DCTL, DCTL_PWRONPRGDONE);
+	}
+
+	dev_dbg(hsotg->dev, "DCTL=0x%08x\n", dwc2_readl(hsotg, DCTL));
+
+	/*
+	 * DxEPCTL_USBActEp says RO in manual, but seems to be set by
+	 * writing to the EPCTL register..
+	 */
+
+	/* set to read 1 8byte packet */
+	dwc2_writel(hsotg, DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
+	       DXEPTSIZ_XFERSIZE(8), DOEPTSIZ0);
+
+	dwc2_writel(hsotg, dwc2_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) |
+	       DXEPCTL_CNAK | DXEPCTL_EPENA |
+	       DXEPCTL_USBACTEP,
+	       DOEPCTL0);
+
+	/* enable, but don't activate EP0in */
+	dwc2_writel(hsotg, dwc2_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) |
+	       DXEPCTL_USBACTEP, DIEPCTL0);
+
+	/* clear global NAKs */
+	val = DCTL_CGOUTNAK | DCTL_CGNPINNAK;
+	if (!is_usb_reset)
+		val |= DCTL_SFTDISCON;
+	dwc2_set_bit(hsotg, DCTL, val);
+
+	/* configure the core to support LPM */
+	dwc2_gadget_init_lpm(hsotg);
+
+	/* program GREFCLK register if needed */
+	if (using_desc_dma(hsotg) && hsotg->params.service_interval)
+		dwc2_gadget_program_ref_clk(hsotg);
+
+	/* must be at-least 3ms to allow bus to see disconnect */
+	mdelay(3);
+
+	hsotg->lx_state = DWC2_L0;
+
+	dwc2_hsotg_enqueue_setup(hsotg);
+
+	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+		dwc2_readl(hsotg, DIEPCTL0),
+		dwc2_readl(hsotg, DOEPCTL0));
+}
+
+void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg)
+{
+	/* set the soft-disconnect bit */
+	dwc2_set_bit(hsotg, DCTL, DCTL_SFTDISCON);
+}
+
+void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg)
+{
+	/* remove the soft-disconnect and let's go */
+	if (!hsotg->role_sw || (dwc2_readl(hsotg, GOTGCTL) & GOTGCTL_BSESVLD))
+		dwc2_clear_bit(hsotg, DCTL, DCTL_SFTDISCON);
+}
+
+/**
+ * dwc2_gadget_handle_incomplete_isoc_in - handle incomplete ISO IN Interrupt.
+ * @hsotg: The device state:
+ *
+ * This interrupt indicates one of the following conditions occurred while
+ * transmitting an ISOC transaction.
+ * - Corrupted IN Token for ISOC EP.
+ * - Packet not complete in FIFO.
+ *
+ * The following actions will be taken:
+ * - Determine the EP
+ * - Disable EP; when 'Endpoint Disabled' interrupt is received Flush FIFO
+ */
+static void dwc2_gadget_handle_incomplete_isoc_in(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hsotg_ep *hs_ep;
+	u32 epctrl;
+	u32 daintmsk;
+	u32 idx;
+
+	dev_dbg(hsotg->dev, "Incomplete isoc in interrupt received:\n");
+
+	daintmsk = dwc2_readl(hsotg, DAINTMSK);
+
+	for (idx = 1; idx < hsotg->num_of_eps; idx++) {
+		hs_ep = hsotg->eps_in[idx];
+		/* Proceed only unmasked ISOC EPs */
+		if ((BIT(idx) & ~daintmsk) || !hs_ep->isochronous)
+			continue;
+
+		epctrl = dwc2_readl(hsotg, DIEPCTL(idx));
+		if ((epctrl & DXEPCTL_EPENA) &&
+		    dwc2_gadget_target_frame_elapsed(hs_ep)) {
+			epctrl |= DXEPCTL_SNAK;
+			epctrl |= DXEPCTL_EPDIS;
+			dwc2_writel(hsotg, epctrl, DIEPCTL(idx));
+		}
+	}
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_INCOMPL_SOIN, GINTSTS);
+}
+
+/**
+ * dwc2_gadget_handle_incomplete_isoc_out - handle incomplete ISO OUT Interrupt
+ * @hsotg: The device state:
+ *
+ * This interrupt indicates one of the following conditions occurred while
+ * transmitting an ISOC transaction.
+ * - Corrupted OUT Token for ISOC EP.
+ * - Packet not complete in FIFO.
+ *
+ * The following actions will be taken:
+ * - Determine the EP
+ * - Set DCTL_SGOUTNAK and unmask GOUTNAKEFF if target frame elapsed.
+ */
+static void dwc2_gadget_handle_incomplete_isoc_out(struct dwc2_hsotg *hsotg)
+{
+	u32 gintsts;
+	u32 gintmsk;
+	u32 daintmsk;
+	u32 epctrl;
+	struct dwc2_hsotg_ep *hs_ep;
+	int idx;
+
+	dev_dbg(hsotg->dev, "%s: GINTSTS_INCOMPL_SOOUT\n", __func__);
+
+	daintmsk = dwc2_readl(hsotg, DAINTMSK);
+	daintmsk >>= DAINT_OUTEP_SHIFT;
+
+	for (idx = 1; idx < hsotg->num_of_eps; idx++) {
+		hs_ep = hsotg->eps_out[idx];
+		/* Proceed only unmasked ISOC EPs */
+		if ((BIT(idx) & ~daintmsk) || !hs_ep->isochronous)
+			continue;
+
+		epctrl = dwc2_readl(hsotg, DOEPCTL(idx));
+		if ((epctrl & DXEPCTL_EPENA) &&
+		    dwc2_gadget_target_frame_elapsed(hs_ep)) {
+			/* Unmask GOUTNAKEFF interrupt */
+			gintmsk = dwc2_readl(hsotg, GINTMSK);
+			gintmsk |= GINTSTS_GOUTNAKEFF;
+			dwc2_writel(hsotg, gintmsk, GINTMSK);
+
+			gintsts = dwc2_readl(hsotg, GINTSTS);
+			if (!(gintsts & GINTSTS_GOUTNAKEFF)) {
+				dwc2_set_bit(hsotg, DCTL, DCTL_SGOUTNAK);
+				break;
+			}
+		}
+	}
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_INCOMPL_SOOUT, GINTSTS);
+}
+
+/**
+ * dwc2_hsotg_irq - handle device interrupt
+ * @irq: The IRQ number triggered
+ * @pw: The pw value when registered the handler.
+ */
+static irqreturn_t dwc2_hsotg_irq(int irq, void *pw)
+{
+	struct dwc2_hsotg *hsotg = pw;
+	int retry_count = 8;
+	u32 gintsts;
+	u32 gintmsk;
+
+	if (!dwc2_is_device_mode(hsotg))
+		return IRQ_NONE;
+
+	spin_lock(&hsotg->lock);
+irq_retry:
+	gintsts = dwc2_readl(hsotg, GINTSTS);
+	gintmsk = dwc2_readl(hsotg, GINTMSK);
+
+	dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n",
+		__func__, gintsts, gintsts & gintmsk, gintmsk, retry_count);
+
+	gintsts &= gintmsk;
+
+	if (gintsts & GINTSTS_RESETDET) {
+		dev_dbg(hsotg->dev, "%s: USBRstDet\n", __func__);
+
+		dwc2_writel(hsotg, GINTSTS_RESETDET, GINTSTS);
+
+		/* This event must be used only if controller is suspended */
+		if (hsotg->in_ppd && hsotg->lx_state == DWC2_L2)
+			dwc2_exit_partial_power_down(hsotg, 0, true);
+
+		hsotg->lx_state = DWC2_L0;
+	}
+
+	if (gintsts & (GINTSTS_USBRST | GINTSTS_RESETDET)) {
+		u32 usb_status = dwc2_readl(hsotg, GOTGCTL);
+		u32 connected = hsotg->connected;
+
+		dev_dbg(hsotg->dev, "%s: USBRst\n", __func__);
+		dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
+			dwc2_readl(hsotg, GNPTXSTS));
+
+		dwc2_writel(hsotg, GINTSTS_USBRST, GINTSTS);
+
+		/* Report disconnection if it is not already done. */
+		dwc2_hsotg_disconnect(hsotg);
+
+		/* Reset device address to zero */
+		dwc2_clear_bit(hsotg, DCFG, DCFG_DEVADDR_MASK);
+
+		if (usb_status & GOTGCTL_BSESVLD && connected)
+			dwc2_hsotg_core_init_disconnected(hsotg, true);
+	}
+
+	if (gintsts & GINTSTS_ENUMDONE) {
+		dwc2_writel(hsotg, GINTSTS_ENUMDONE, GINTSTS);
+
+		dwc2_hsotg_irq_enumdone(hsotg);
+	}
+
+	if (gintsts & (GINTSTS_OEPINT | GINTSTS_IEPINT)) {
+		u32 daint = dwc2_readl(hsotg, DAINT);
+		u32 daintmsk = dwc2_readl(hsotg, DAINTMSK);
+		u32 daint_out, daint_in;
+		int ep;
+
+		daint &= daintmsk;
+		daint_out = daint >> DAINT_OUTEP_SHIFT;
+		daint_in = daint & ~(daint_out << DAINT_OUTEP_SHIFT);
+
+		dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint);
+
+		for (ep = 0; ep < hsotg->num_of_eps && daint_out;
+						ep++, daint_out >>= 1) {
+			if (daint_out & 1)
+				dwc2_hsotg_epint(hsotg, ep, 0);
+		}
+
+		for (ep = 0; ep < hsotg->num_of_eps  && daint_in;
+						ep++, daint_in >>= 1) {
+			if (daint_in & 1)
+				dwc2_hsotg_epint(hsotg, ep, 1);
+		}
+	}
+
+	/* check both FIFOs */
+
+	if (gintsts & GINTSTS_NPTXFEMP) {
+		dev_dbg(hsotg->dev, "NPTxFEmp\n");
+
+		/*
+		 * Disable the interrupt to stop it happening again
+		 * unless one of these endpoint routines decides that
+		 * it needs re-enabling
+		 */
+
+		dwc2_hsotg_disable_gsint(hsotg, GINTSTS_NPTXFEMP);
+		dwc2_hsotg_irq_fifoempty(hsotg, false);
+	}
+
+	if (gintsts & GINTSTS_PTXFEMP) {
+		dev_dbg(hsotg->dev, "PTxFEmp\n");
+
+		/* See note in GINTSTS_NPTxFEmp */
+
+		dwc2_hsotg_disable_gsint(hsotg, GINTSTS_PTXFEMP);
+		dwc2_hsotg_irq_fifoempty(hsotg, true);
+	}
+
+	if (gintsts & GINTSTS_RXFLVL) {
+		/*
+		 * note, since GINTSTS_RxFLvl doubles as FIFO-not-empty,
+		 * we need to retry dwc2_hsotg_handle_rx if this is still
+		 * set.
+		 */
+
+		dwc2_hsotg_handle_rx(hsotg);
+	}
+
+	if (gintsts & GINTSTS_ERLYSUSP) {
+		dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n");
+		dwc2_writel(hsotg, GINTSTS_ERLYSUSP, GINTSTS);
+	}
+
+	/*
+	 * these next two seem to crop-up occasionally causing the core
+	 * to shutdown the USB transfer, so try clearing them and logging
+	 * the occurrence.
+	 */
+
+	if (gintsts & GINTSTS_GOUTNAKEFF) {
+		u8 idx;
+		u32 epctrl;
+		u32 gintmsk;
+		u32 daintmsk;
+		struct dwc2_hsotg_ep *hs_ep;
+
+		daintmsk = dwc2_readl(hsotg, DAINTMSK);
+		daintmsk >>= DAINT_OUTEP_SHIFT;
+		/* Mask this interrupt */
+		gintmsk = dwc2_readl(hsotg, GINTMSK);
+		gintmsk &= ~GINTSTS_GOUTNAKEFF;
+		dwc2_writel(hsotg, gintmsk, GINTMSK);
+
+		dev_dbg(hsotg->dev, "GOUTNakEff triggered\n");
+		for (idx = 1; idx < hsotg->num_of_eps; idx++) {
+			hs_ep = hsotg->eps_out[idx];
+			/* Proceed only unmasked ISOC EPs */
+			if (BIT(idx) & ~daintmsk)
+				continue;
+
+			epctrl = dwc2_readl(hsotg, DOEPCTL(idx));
+
+			//ISOC Ep's only
+			if ((epctrl & DXEPCTL_EPENA) && hs_ep->isochronous) {
+				epctrl |= DXEPCTL_SNAK;
+				epctrl |= DXEPCTL_EPDIS;
+				dwc2_writel(hsotg, epctrl, DOEPCTL(idx));
+				continue;
+			}
+
+			//Non-ISOC EP's
+			if (hs_ep->halted) {
+				if (!(epctrl & DXEPCTL_EPENA))
+					epctrl |= DXEPCTL_EPENA;
+				epctrl |= DXEPCTL_EPDIS;
+				epctrl |= DXEPCTL_STALL;
+				dwc2_writel(hsotg, epctrl, DOEPCTL(idx));
+			}
+		}
+
+		/* This interrupt bit is cleared in DXEPINT_EPDISBLD handler */
+	}
+
+	if (gintsts & GINTSTS_GINNAKEFF) {
+		dev_info(hsotg->dev, "GINNakEff triggered\n");
+
+		dwc2_set_bit(hsotg, DCTL, DCTL_CGNPINNAK);
+
+		dwc2_hsotg_dump(hsotg);
+	}
+
+	if (gintsts & GINTSTS_INCOMPL_SOIN)
+		dwc2_gadget_handle_incomplete_isoc_in(hsotg);
+
+	if (gintsts & GINTSTS_INCOMPL_SOOUT)
+		dwc2_gadget_handle_incomplete_isoc_out(hsotg);
+
+	/*
+	 * if we've had fifo events, we should try and go around the
+	 * loop again to see if there's any point in returning yet.
+	 */
+
+	if (gintsts & IRQ_RETRY_MASK && --retry_count > 0)
+		goto irq_retry;
+
+	/* Check WKUP_ALERT interrupt*/
+	if (hsotg->params.service_interval)
+		dwc2_gadget_wkup_alert_handler(hsotg);
+
+	spin_unlock(&hsotg->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void dwc2_hsotg_ep_stop_xfr(struct dwc2_hsotg *hsotg,
+				   struct dwc2_hsotg_ep *hs_ep)
+{
+	u32 epctrl_reg;
+	u32 epint_reg;
+
+	epctrl_reg = hs_ep->dir_in ? DIEPCTL(hs_ep->index) :
+		DOEPCTL(hs_ep->index);
+	epint_reg = hs_ep->dir_in ? DIEPINT(hs_ep->index) :
+		DOEPINT(hs_ep->index);
+
+	dev_dbg(hsotg->dev, "%s: stopping transfer on %s\n", __func__,
+		hs_ep->name);
+
+	if (hs_ep->dir_in) {
+		if (hsotg->dedicated_fifos || hs_ep->periodic) {
+			dwc2_set_bit(hsotg, epctrl_reg, DXEPCTL_SNAK);
+			/* Wait for Nak effect */
+			if (dwc2_hsotg_wait_bit_set(hsotg, epint_reg,
+						    DXEPINT_INEPNAKEFF, 100))
+				dev_warn(hsotg->dev,
+					 "%s: timeout DIEPINT.NAKEFF\n",
+					 __func__);
+		} else {
+			dwc2_set_bit(hsotg, DCTL, DCTL_SGNPINNAK);
+			/* Wait for Nak effect */
+			if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS,
+						    GINTSTS_GINNAKEFF, 100))
+				dev_warn(hsotg->dev,
+					 "%s: timeout GINTSTS.GINNAKEFF\n",
+					 __func__);
+		}
+	} else {
+		/* Mask GINTSTS_GOUTNAKEFF interrupt */
+		dwc2_hsotg_disable_gsint(hsotg, GINTSTS_GOUTNAKEFF);
+
+		if (!(dwc2_readl(hsotg, GINTSTS) & GINTSTS_GOUTNAKEFF))
+			dwc2_set_bit(hsotg, DCTL, DCTL_SGOUTNAK);
+
+		if (!using_dma(hsotg)) {
+			/* Wait for GINTSTS_RXFLVL interrupt */
+			if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS,
+						    GINTSTS_RXFLVL, 100)) {
+				dev_warn(hsotg->dev, "%s: timeout GINTSTS.RXFLVL\n",
+					 __func__);
+			} else {
+				/*
+				 * Pop GLOBAL OUT NAK status packet from RxFIFO
+				 * to assert GOUTNAKEFF interrupt
+				 */
+				dwc2_readl(hsotg, GRXSTSP);
+			}
+		}
+
+		/* Wait for global nak to take effect */
+		if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS,
+					    GINTSTS_GOUTNAKEFF, 100))
+			dev_warn(hsotg->dev, "%s: timeout GINTSTS.GOUTNAKEFF\n",
+				 __func__);
+	}
+
+	/* Disable ep */
+	dwc2_set_bit(hsotg, epctrl_reg, DXEPCTL_EPDIS | DXEPCTL_SNAK);
+
+	/* Wait for ep to be disabled */
+	if (dwc2_hsotg_wait_bit_set(hsotg, epint_reg, DXEPINT_EPDISBLD, 100))
+		dev_warn(hsotg->dev,
+			 "%s: timeout DOEPCTL.EPDisable\n", __func__);
+
+	/* Clear EPDISBLD interrupt */
+	dwc2_set_bit(hsotg, epint_reg, DXEPINT_EPDISBLD);
+
+	if (hs_ep->dir_in) {
+		unsigned short fifo_index;
+
+		if (hsotg->dedicated_fifos || hs_ep->periodic)
+			fifo_index = hs_ep->fifo_index;
+		else
+			fifo_index = 0;
+
+		/* Flush TX FIFO */
+		dwc2_flush_tx_fifo(hsotg, fifo_index);
+
+		/* Clear Global In NP NAK in Shared FIFO for non periodic ep */
+		if (!hsotg->dedicated_fifos && !hs_ep->periodic)
+			dwc2_set_bit(hsotg, DCTL, DCTL_CGNPINNAK);
+
+	} else {
+		/* Remove global NAKs */
+		dwc2_set_bit(hsotg, DCTL, DCTL_CGOUTNAK);
+	}
+}
+
+/**
+ * dwc2_hsotg_ep_enable - enable the given endpoint
+ * @ep: The USB endpint to configure
+ * @desc: The USB endpoint descriptor to configure with.
+ *
+ * This is called from the USB gadget code's usb_ep_enable().
+ */
+static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
+				const struct usb_endpoint_descriptor *desc)
+{
+	struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	unsigned long flags;
+	unsigned int index = hs_ep->index;
+	u32 epctrl_reg;
+	u32 epctrl;
+	u32 mps;
+	u32 mc;
+	u32 mask;
+	unsigned int dir_in;
+	unsigned int i, val, size;
+	int ret = 0;
+	unsigned char ep_type;
+	int desc_num;
+
+	dev_dbg(hsotg->dev,
+		"%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n",
+		__func__, ep->name, desc->bEndpointAddress, desc->bmAttributes,
+		desc->wMaxPacketSize, desc->bInterval);
+
+	/* not to be called for EP0 */
+	if (index == 0) {
+		dev_err(hsotg->dev, "%s: called for EP 0\n", __func__);
+		return -EINVAL;
+	}
+
+	dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0;
+	if (dir_in != hs_ep->dir_in) {
+		dev_err(hsotg->dev, "%s: direction mismatch!\n", __func__);
+		return -EINVAL;
+	}
+
+	ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	mps = usb_endpoint_maxp(desc);
+	mc = usb_endpoint_maxp_mult(desc);
+
+	/* ISOC IN in DDMA supported bInterval up to 10 */
+	if (using_desc_dma(hsotg) && ep_type == USB_ENDPOINT_XFER_ISOC &&
+	    dir_in && desc->bInterval > 10) {
+		dev_err(hsotg->dev,
+			"%s: ISOC IN, DDMA: bInterval>10 not supported!\n", __func__);
+		return -EINVAL;
+	}
+
+	/* High bandwidth ISOC OUT in DDMA not supported */
+	if (using_desc_dma(hsotg) && ep_type == USB_ENDPOINT_XFER_ISOC &&
+	    !dir_in && mc > 1) {
+		dev_err(hsotg->dev,
+			"%s: ISOC OUT, DDMA: HB not supported!\n", __func__);
+		return -EINVAL;
+	}
+
+	/* note, we handle this here instead of dwc2_hsotg_set_ep_maxpacket */
+
+	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
+	epctrl = dwc2_readl(hsotg, epctrl_reg);
+
+	dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
+		__func__, epctrl, epctrl_reg);
+
+	if (using_desc_dma(hsotg) && ep_type == USB_ENDPOINT_XFER_ISOC)
+		desc_num = MAX_DMA_DESC_NUM_HS_ISOC;
+	else
+		desc_num = MAX_DMA_DESC_NUM_GENERIC;
+
+	/* Allocate DMA descriptor chain for non-ctrl endpoints */
+	if (using_desc_dma(hsotg) && !hs_ep->desc_list) {
+		hs_ep->desc_list = dmam_alloc_coherent(hsotg->dev,
+			desc_num * sizeof(struct dwc2_dma_desc),
+			&hs_ep->desc_list_dma, GFP_ATOMIC);
+		if (!hs_ep->desc_list) {
+			ret = -ENOMEM;
+			goto error2;
+		}
+	}
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	epctrl &= ~(DXEPCTL_EPTYPE_MASK | DXEPCTL_MPS_MASK);
+	epctrl |= DXEPCTL_MPS(mps);
+
+	/*
+	 * mark the endpoint as active, otherwise the core may ignore
+	 * transactions entirely for this endpoint
+	 */
+	epctrl |= DXEPCTL_USBACTEP;
+
+	/* update the endpoint state */
+	dwc2_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps, mc, dir_in);
+
+	/* default, set to non-periodic */
+	hs_ep->isochronous = 0;
+	hs_ep->periodic = 0;
+	hs_ep->halted = 0;
+	hs_ep->wedged = 0;
+	hs_ep->interval = desc->bInterval;
+
+	switch (ep_type) {
+	case USB_ENDPOINT_XFER_ISOC:
+		epctrl |= DXEPCTL_EPTYPE_ISO;
+		epctrl |= DXEPCTL_SETEVENFR;
+		hs_ep->isochronous = 1;
+		hs_ep->interval = 1 << (desc->bInterval - 1);
+		hs_ep->target_frame = TARGET_FRAME_INITIAL;
+		hs_ep->next_desc = 0;
+		hs_ep->compl_desc = 0;
+		if (dir_in) {
+			hs_ep->periodic = 1;
+			mask = dwc2_readl(hsotg, DIEPMSK);
+			mask |= DIEPMSK_NAKMSK;
+			dwc2_writel(hsotg, mask, DIEPMSK);
+		} else {
+			epctrl |= DXEPCTL_SNAK;
+			mask = dwc2_readl(hsotg, DOEPMSK);
+			mask |= DOEPMSK_OUTTKNEPDISMSK;
+			dwc2_writel(hsotg, mask, DOEPMSK);
+		}
+		break;
+
+	case USB_ENDPOINT_XFER_BULK:
+		epctrl |= DXEPCTL_EPTYPE_BULK;
+		break;
+
+	case USB_ENDPOINT_XFER_INT:
+		if (dir_in)
+			hs_ep->periodic = 1;
+
+		if (hsotg->gadget.speed == USB_SPEED_HIGH)
+			hs_ep->interval = 1 << (desc->bInterval - 1);
+
+		epctrl |= DXEPCTL_EPTYPE_INTERRUPT;
+		break;
+
+	case USB_ENDPOINT_XFER_CONTROL:
+		epctrl |= DXEPCTL_EPTYPE_CONTROL;
+		break;
+	}
+
+	/*
+	 * if the hardware has dedicated fifos, we must give each IN EP
+	 * a unique tx-fifo even if it is non-periodic.
+	 */
+	if (dir_in && hsotg->dedicated_fifos) {
+		unsigned fifo_count = dwc2_hsotg_tx_fifo_count(hsotg);
+		u32 fifo_index = 0;
+		u32 fifo_size = UINT_MAX;
+
+		size = hs_ep->ep.maxpacket * hs_ep->mc;
+		for (i = 1; i <= fifo_count; ++i) {
+			if (hsotg->fifo_map & (1 << i))
+				continue;
+			val = dwc2_readl(hsotg, DPTXFSIZN(i));
+			val = (val >> FIFOSIZE_DEPTH_SHIFT) * 4;
+			if (val < size)
+				continue;
+			/* Search for smallest acceptable fifo */
+			if (val < fifo_size) {
+				fifo_size = val;
+				fifo_index = i;
+			}
+		}
+		if (!fifo_index) {
+			dev_err(hsotg->dev,
+				"%s: No suitable fifo found\n", __func__);
+			ret = -ENOMEM;
+			goto error1;
+		}
+		epctrl &= ~(DXEPCTL_TXFNUM_LIMIT << DXEPCTL_TXFNUM_SHIFT);
+		hsotg->fifo_map |= 1 << fifo_index;
+		epctrl |= DXEPCTL_TXFNUM(fifo_index);
+		hs_ep->fifo_index = fifo_index;
+		hs_ep->fifo_size = fifo_size;
+	}
+
+	/* for non control endpoints, set PID to D0 */
+	if (index && !hs_ep->isochronous)
+		epctrl |= DXEPCTL_SETD0PID;
+
+	/* WA for Full speed ISOC IN in DDMA mode.
+	 * By Clear NAK status of EP, core will send ZLP
+	 * to IN token and assert NAK interrupt relying
+	 * on TxFIFO status only
+	 */
+
+	if (hsotg->gadget.speed == USB_SPEED_FULL &&
+	    hs_ep->isochronous && dir_in) {
+		/* The WA applies only to core versions from 2.72a
+		 * to 4.00a (including both). Also for FS_IOT_1.00a
+		 * and HS_IOT_1.00a.
+		 */
+		u32 gsnpsid = dwc2_readl(hsotg, GSNPSID);
+
+		if ((gsnpsid >= DWC2_CORE_REV_2_72a &&
+		     gsnpsid <= DWC2_CORE_REV_4_00a) ||
+		     gsnpsid == DWC2_FS_IOT_REV_1_00a ||
+		     gsnpsid == DWC2_HS_IOT_REV_1_00a)
+			epctrl |= DXEPCTL_CNAK;
+	}
+
+	dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n",
+		__func__, epctrl);
+
+	dwc2_writel(hsotg, epctrl, epctrl_reg);
+	dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x\n",
+		__func__, dwc2_readl(hsotg, epctrl_reg));
+
+	/* enable the endpoint interrupt */
+	dwc2_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
+
+error1:
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+error2:
+	if (ret && using_desc_dma(hsotg) && hs_ep->desc_list) {
+		dmam_free_coherent(hsotg->dev, desc_num *
+			sizeof(struct dwc2_dma_desc),
+			hs_ep->desc_list, hs_ep->desc_list_dma);
+		hs_ep->desc_list = NULL;
+	}
+
+	return ret;
+}
+
+/**
+ * dwc2_hsotg_ep_disable - disable given endpoint
+ * @ep: The endpoint to disable.
+ */
+static int dwc2_hsotg_ep_disable(struct usb_ep *ep)
+{
+	struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	int dir_in = hs_ep->dir_in;
+	int index = hs_ep->index;
+	u32 epctrl_reg;
+	u32 ctrl;
+
+	dev_dbg(hsotg->dev, "%s(ep %p)\n", __func__, ep);
+
+	if (ep == &hsotg->eps_out[0]->ep) {
+		dev_err(hsotg->dev, "%s: called for ep0\n", __func__);
+		return -EINVAL;
+	}
+
+	if (hsotg->op_state != OTG_STATE_B_PERIPHERAL) {
+		dev_err(hsotg->dev, "%s: called in host mode?\n", __func__);
+		return -EINVAL;
+	}
+
+	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
+
+	ctrl = dwc2_readl(hsotg, epctrl_reg);
+
+	if (ctrl & DXEPCTL_EPENA)
+		dwc2_hsotg_ep_stop_xfr(hsotg, hs_ep);
+
+	ctrl &= ~DXEPCTL_EPENA;
+	ctrl &= ~DXEPCTL_USBACTEP;
+	ctrl |= DXEPCTL_SNAK;
+
+	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
+	dwc2_writel(hsotg, ctrl, epctrl_reg);
+
+	/* disable endpoint interrupts */
+	dwc2_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0);
+
+	/* terminate all requests with shutdown */
+	kill_all_requests(hsotg, hs_ep, -ESHUTDOWN);
+
+	hsotg->fifo_map &= ~(1 << hs_ep->fifo_index);
+	hs_ep->fifo_index = 0;
+	hs_ep->fifo_size = 0;
+
+	return 0;
+}
+
+static int dwc2_hsotg_ep_disable_lock(struct usb_ep *ep)
+{
+	struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	ret = dwc2_hsotg_ep_disable(ep);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	return ret;
+}
+
+/**
+ * on_list - check request is on the given endpoint
+ * @ep: The endpoint to check.
+ * @test: The request to test if it is on the endpoint.
+ */
+static bool on_list(struct dwc2_hsotg_ep *ep, struct dwc2_hsotg_req *test)
+{
+	struct dwc2_hsotg_req *req, *treq;
+
+	list_for_each_entry_safe(req, treq, &ep->queue, queue) {
+		if (req == test)
+			return true;
+	}
+
+	return false;
+}
+
+/**
+ * dwc2_hsotg_ep_dequeue - dequeue given endpoint
+ * @ep: The endpoint to dequeue.
+ * @req: The request to be removed from a queue.
+ */
+static int dwc2_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	struct dwc2_hsotg_req *hs_req = our_req(req);
+	struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hs = hs_ep->parent;
+	unsigned long flags;
+
+	dev_dbg(hs->dev, "ep_dequeue(%p,%p)\n", ep, req);
+
+	spin_lock_irqsave(&hs->lock, flags);
+
+	if (!on_list(hs_ep, hs_req)) {
+		spin_unlock_irqrestore(&hs->lock, flags);
+		return -EINVAL;
+	}
+
+	/* Dequeue already started request */
+	if (req == &hs_ep->req->req)
+		dwc2_hsotg_ep_stop_xfr(hs, hs_ep);
+
+	dwc2_hsotg_complete_request(hs, hs_ep, hs_req, -ECONNRESET);
+	spin_unlock_irqrestore(&hs->lock, flags);
+
+	return 0;
+}
+
+/**
+ * dwc2_gadget_ep_set_wedge - set wedge on a given endpoint
+ * @ep: The endpoint to be wedged.
+ *
+ */
+static int dwc2_gadget_ep_set_wedge(struct usb_ep *ep)
+{
+	struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hs = hs_ep->parent;
+
+	unsigned long	flags;
+	int		ret;
+
+	spin_lock_irqsave(&hs->lock, flags);
+	hs_ep->wedged = 1;
+	ret = dwc2_hsotg_ep_sethalt(ep, 1, false);
+	spin_unlock_irqrestore(&hs->lock, flags);
+
+	return ret;
+}
+
+/**
+ * dwc2_hsotg_ep_sethalt - set halt on a given endpoint
+ * @ep: The endpoint to set halt.
+ * @value: Set or unset the halt.
+ * @now: If true, stall the endpoint now. Otherwise return -EAGAIN if
+ *       the endpoint is busy processing requests.
+ *
+ * We need to stall the endpoint immediately if request comes from set_feature
+ * protocol command handler.
+ */
+static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value, bool now)
+{
+	struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hs = hs_ep->parent;
+	int index = hs_ep->index;
+	u32 epreg;
+	u32 epctl;
+	u32 xfertype;
+
+	dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value);
+
+	if (index == 0) {
+		if (value)
+			dwc2_hsotg_stall_ep0(hs);
+		else
+			dev_warn(hs->dev,
+				 "%s: can't clear halt on ep0\n", __func__);
+		return 0;
+	}
+
+	if (hs_ep->isochronous) {
+		dev_err(hs->dev, "%s is Isochronous Endpoint\n", ep->name);
+		return -EINVAL;
+	}
+
+	if (!now && value && !list_empty(&hs_ep->queue)) {
+		dev_dbg(hs->dev, "%s request is pending, cannot halt\n",
+			ep->name);
+		return -EAGAIN;
+	}
+
+	if (hs_ep->dir_in) {
+		epreg = DIEPCTL(index);
+		epctl = dwc2_readl(hs, epreg);
+
+		if (value) {
+			epctl |= DXEPCTL_STALL | DXEPCTL_SNAK;
+			if (epctl & DXEPCTL_EPENA)
+				epctl |= DXEPCTL_EPDIS;
+		} else {
+			epctl &= ~DXEPCTL_STALL;
+			hs_ep->wedged = 0;
+			xfertype = epctl & DXEPCTL_EPTYPE_MASK;
+			if (xfertype == DXEPCTL_EPTYPE_BULK ||
+			    xfertype == DXEPCTL_EPTYPE_INTERRUPT)
+				epctl |= DXEPCTL_SETD0PID;
+		}
+		dwc2_writel(hs, epctl, epreg);
+	} else {
+		epreg = DOEPCTL(index);
+		epctl = dwc2_readl(hs, epreg);
+
+		if (value) {
+			/* Unmask GOUTNAKEFF interrupt */
+			dwc2_hsotg_en_gsint(hs, GINTSTS_GOUTNAKEFF);
+
+			if (!(dwc2_readl(hs, GINTSTS) & GINTSTS_GOUTNAKEFF))
+				dwc2_set_bit(hs, DCTL, DCTL_SGOUTNAK);
+			// STALL bit will be set in GOUTNAKEFF interrupt handler
+		} else {
+			epctl &= ~DXEPCTL_STALL;
+			hs_ep->wedged = 0;
+			xfertype = epctl & DXEPCTL_EPTYPE_MASK;
+			if (xfertype == DXEPCTL_EPTYPE_BULK ||
+			    xfertype == DXEPCTL_EPTYPE_INTERRUPT)
+				epctl |= DXEPCTL_SETD0PID;
+			dwc2_writel(hs, epctl, epreg);
+		}
+	}
+
+	hs_ep->halted = value;
+	return 0;
+}
+
+/**
+ * dwc2_hsotg_ep_sethalt_lock - set halt on a given endpoint with lock held
+ * @ep: The endpoint to set halt.
+ * @value: Set or unset the halt.
+ */
+static int dwc2_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value)
+{
+	struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hs = hs_ep->parent;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&hs->lock, flags);
+	ret = dwc2_hsotg_ep_sethalt(ep, value, false);
+	spin_unlock_irqrestore(&hs->lock, flags);
+
+	return ret;
+}
+
+static const struct usb_ep_ops dwc2_hsotg_ep_ops = {
+	.enable		= dwc2_hsotg_ep_enable,
+	.disable	= dwc2_hsotg_ep_disable_lock,
+	.alloc_request	= dwc2_hsotg_ep_alloc_request,
+	.free_request	= dwc2_hsotg_ep_free_request,
+	.queue		= dwc2_hsotg_ep_queue_lock,
+	.dequeue	= dwc2_hsotg_ep_dequeue,
+	.set_halt	= dwc2_hsotg_ep_sethalt_lock,
+	.set_wedge	= dwc2_gadget_ep_set_wedge,
+	/* note, don't believe we have any call for the fifo routines */
+};
+
+/**
+ * dwc2_hsotg_init - initialize the usb core
+ * @hsotg: The driver state
+ */
+static void dwc2_hsotg_init(struct dwc2_hsotg *hsotg)
+{
+	/* unmask subset of endpoint interrupts */
+
+	dwc2_writel(hsotg, DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
+		    DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK,
+		    DIEPMSK);
+
+	dwc2_writel(hsotg, DOEPMSK_SETUPMSK | DOEPMSK_AHBERRMSK |
+		    DOEPMSK_EPDISBLDMSK | DOEPMSK_XFERCOMPLMSK,
+		    DOEPMSK);
+
+	dwc2_writel(hsotg, 0, DAINTMSK);
+
+	/* Be in disconnected state until gadget is registered */
+	dwc2_set_bit(hsotg, DCTL, DCTL_SFTDISCON);
+
+	/* setup fifos */
+
+	dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
+		dwc2_readl(hsotg, GRXFSIZ),
+		dwc2_readl(hsotg, GNPTXFSIZ));
+
+	dwc2_hsotg_init_fifo(hsotg);
+
+	if (using_dma(hsotg))
+		dwc2_set_bit(hsotg, GAHBCFG, GAHBCFG_DMA_EN);
+}
+
+/**
+ * dwc2_hsotg_udc_start - prepare the udc for work
+ * @gadget: The usb gadget state
+ * @driver: The usb gadget driver
+ *
+ * Perform initialization to prepare udc device and driver
+ * to work.
+ */
+static int dwc2_hsotg_udc_start(struct usb_gadget *gadget,
+				struct usb_gadget_driver *driver)
+{
+	struct dwc2_hsotg *hsotg = to_hsotg(gadget);
+	unsigned long flags;
+	int ret;
+
+	if (!hsotg) {
+		pr_err("%s: called with no device\n", __func__);
+		return -ENODEV;
+	}
+
+	if (!driver) {
+		dev_err(hsotg->dev, "%s: no driver\n", __func__);
+		return -EINVAL;
+	}
+
+	if (driver->max_speed < USB_SPEED_FULL)
+		dev_err(hsotg->dev, "%s: bad speed\n", __func__);
+
+	if (!driver->setup) {
+		dev_err(hsotg->dev, "%s: missing entry points\n", __func__);
+		return -EINVAL;
+	}
+
+	WARN_ON(hsotg->driver);
+
+	hsotg->driver = driver;
+	hsotg->gadget.dev.of_node = hsotg->dev->of_node;
+	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+
+	if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) {
+		ret = dwc2_lowlevel_hw_enable(hsotg);
+		if (ret)
+			goto err;
+	}
+
+	if (!IS_ERR_OR_NULL(hsotg->uphy))
+		otg_set_peripheral(hsotg->uphy->otg, &hsotg->gadget);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	if (dwc2_hw_is_device(hsotg)) {
+		dwc2_hsotg_init(hsotg);
+		dwc2_hsotg_core_init_disconnected(hsotg, false);
+	}
+
+	hsotg->enabled = 0;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	gadget->sg_supported = using_desc_dma(hsotg);
+	dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name);
+
+	return 0;
+
+err:
+	hsotg->driver = NULL;
+	return ret;
+}
+
+/**
+ * dwc2_hsotg_udc_stop - stop the udc
+ * @gadget: The usb gadget state
+ *
+ * Stop udc hw block and stay tunned for future transmissions
+ */
+static int dwc2_hsotg_udc_stop(struct usb_gadget *gadget)
+{
+	struct dwc2_hsotg *hsotg = to_hsotg(gadget);
+	unsigned long flags;
+	int ep;
+
+	if (!hsotg)
+		return -ENODEV;
+
+	/* all endpoints should be shutdown */
+	for (ep = 1; ep < hsotg->num_of_eps; ep++) {
+		if (hsotg->eps_in[ep])
+			dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep);
+		if (hsotg->eps_out[ep])
+			dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep);
+	}
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	hsotg->driver = NULL;
+	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+	hsotg->enabled = 0;
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	if (!IS_ERR_OR_NULL(hsotg->uphy))
+		otg_set_peripheral(hsotg->uphy->otg, NULL);
+
+	if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
+		dwc2_lowlevel_hw_disable(hsotg);
+
+	return 0;
+}
+
+/**
+ * dwc2_hsotg_gadget_getframe - read the frame number
+ * @gadget: The usb gadget state
+ *
+ * Read the {micro} frame number
+ */
+static int dwc2_hsotg_gadget_getframe(struct usb_gadget *gadget)
+{
+	return dwc2_hsotg_read_frameno(to_hsotg(gadget));
+}
+
+/**
+ * dwc2_hsotg_set_selfpowered - set if device is self/bus powered
+ * @gadget: The usb gadget state
+ * @is_selfpowered: Whether the device is self-powered
+ *
+ * Set if the device is self or bus powered.
+ */
+static int dwc2_hsotg_set_selfpowered(struct usb_gadget *gadget,
+				      int is_selfpowered)
+{
+	struct dwc2_hsotg *hsotg = to_hsotg(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	gadget->is_selfpowered = !!is_selfpowered;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return 0;
+}
+
+/**
+ * dwc2_hsotg_pullup - connect/disconnect the USB PHY
+ * @gadget: The usb gadget state
+ * @is_on: Current state of the USB PHY
+ *
+ * Connect/Disconnect the USB PHY pullup
+ */
+static int dwc2_hsotg_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct dwc2_hsotg *hsotg = to_hsotg(gadget);
+	unsigned long flags;
+
+	dev_dbg(hsotg->dev, "%s: is_on: %d op_state: %d\n", __func__, is_on,
+		hsotg->op_state);
+
+	/* Don't modify pullup state while in host mode */
+	if (hsotg->op_state != OTG_STATE_B_PERIPHERAL) {
+		hsotg->enabled = is_on;
+		return 0;
+	}
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	if (is_on) {
+		hsotg->enabled = 1;
+		dwc2_hsotg_core_init_disconnected(hsotg, false);
+		/* Enable ACG feature in device mode,if supported */
+		dwc2_enable_acg(hsotg);
+		dwc2_hsotg_core_connect(hsotg);
+	} else {
+		dwc2_hsotg_core_disconnect(hsotg);
+		dwc2_hsotg_disconnect(hsotg);
+		hsotg->enabled = 0;
+	}
+
+	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return 0;
+}
+
+static int dwc2_hsotg_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct dwc2_hsotg *hsotg = to_hsotg(gadget);
+	unsigned long flags;
+
+	dev_dbg(hsotg->dev, "%s: is_active: %d\n", __func__, is_active);
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	/*
+	 * If controller is in partial power down state, it must exit from
+	 * that state before being initialized / de-initialized
+	 */
+	if (hsotg->lx_state == DWC2_L2 && hsotg->in_ppd)
+		/*
+		 * No need to check the return value as
+		 * registers are not being restored.
+		 */
+		dwc2_exit_partial_power_down(hsotg, 0, false);
+
+	if (is_active) {
+		hsotg->op_state = OTG_STATE_B_PERIPHERAL;
+
+		dwc2_hsotg_core_init_disconnected(hsotg, false);
+		if (hsotg->enabled) {
+			/* Enable ACG feature in device mode,if supported */
+			dwc2_enable_acg(hsotg);
+			dwc2_hsotg_core_connect(hsotg);
+		}
+	} else {
+		dwc2_hsotg_core_disconnect(hsotg);
+		dwc2_hsotg_disconnect(hsotg);
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	return 0;
+}
+
+/**
+ * dwc2_hsotg_vbus_draw - report bMaxPower field
+ * @gadget: The usb gadget state
+ * @mA: Amount of current
+ *
+ * Report how much power the device may consume to the phy.
+ */
+static int dwc2_hsotg_vbus_draw(struct usb_gadget *gadget, unsigned int mA)
+{
+	struct dwc2_hsotg *hsotg = to_hsotg(gadget);
+
+	if (IS_ERR_OR_NULL(hsotg->uphy))
+		return -ENOTSUPP;
+	return usb_phy_set_power(hsotg->uphy, mA);
+}
+
+static void dwc2_gadget_set_speed(struct usb_gadget *g, enum usb_device_speed speed)
+{
+	struct dwc2_hsotg *hsotg = to_hsotg(g);
+	unsigned long		flags;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	switch (speed) {
+	case USB_SPEED_HIGH:
+		hsotg->params.speed = DWC2_SPEED_PARAM_HIGH;
+		break;
+	case USB_SPEED_FULL:
+		hsotg->params.speed = DWC2_SPEED_PARAM_FULL;
+		break;
+	case USB_SPEED_LOW:
+		hsotg->params.speed = DWC2_SPEED_PARAM_LOW;
+		break;
+	default:
+		dev_err(hsotg->dev, "invalid speed (%d)\n", speed);
+	}
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+static const struct usb_gadget_ops dwc2_hsotg_gadget_ops = {
+	.get_frame	= dwc2_hsotg_gadget_getframe,
+	.set_selfpowered	= dwc2_hsotg_set_selfpowered,
+	.udc_start		= dwc2_hsotg_udc_start,
+	.udc_stop		= dwc2_hsotg_udc_stop,
+	.pullup                 = dwc2_hsotg_pullup,
+	.udc_set_speed		= dwc2_gadget_set_speed,
+	.vbus_session		= dwc2_hsotg_vbus_session,
+	.vbus_draw		= dwc2_hsotg_vbus_draw,
+};
+
+/**
+ * dwc2_hsotg_initep - initialise a single endpoint
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint to be initialised.
+ * @epnum: The endpoint number
+ * @dir_in: True if direction is in.
+ *
+ * Initialise the given endpoint (as part of the probe and device state
+ * creation) to give to the gadget driver. Setup the endpoint name, any
+ * direction information and other state that may be required.
+ */
+static void dwc2_hsotg_initep(struct dwc2_hsotg *hsotg,
+			      struct dwc2_hsotg_ep *hs_ep,
+				       int epnum,
+				       bool dir_in)
+{
+	char *dir;
+
+	if (epnum == 0)
+		dir = "";
+	else if (dir_in)
+		dir = "in";
+	else
+		dir = "out";
+
+	hs_ep->dir_in = dir_in;
+	hs_ep->index = epnum;
+
+	snprintf(hs_ep->name, sizeof(hs_ep->name), "ep%d%s", epnum, dir);
+
+	INIT_LIST_HEAD(&hs_ep->queue);
+	INIT_LIST_HEAD(&hs_ep->ep.ep_list);
+
+	/* add to the list of endpoints known by the gadget driver */
+	if (epnum)
+		list_add_tail(&hs_ep->ep.ep_list, &hsotg->gadget.ep_list);
+
+	hs_ep->parent = hsotg;
+	hs_ep->ep.name = hs_ep->name;
+
+	if (hsotg->params.speed == DWC2_SPEED_PARAM_LOW)
+		usb_ep_set_maxpacket_limit(&hs_ep->ep, 8);
+	else
+		usb_ep_set_maxpacket_limit(&hs_ep->ep,
+					   epnum ? 1024 : EP0_MPS_LIMIT);
+	hs_ep->ep.ops = &dwc2_hsotg_ep_ops;
+
+	if (epnum == 0) {
+		hs_ep->ep.caps.type_control = true;
+	} else {
+		if (hsotg->params.speed != DWC2_SPEED_PARAM_LOW) {
+			hs_ep->ep.caps.type_iso = true;
+			hs_ep->ep.caps.type_bulk = true;
+		}
+		hs_ep->ep.caps.type_int = true;
+	}
+
+	if (dir_in)
+		hs_ep->ep.caps.dir_in = true;
+	else
+		hs_ep->ep.caps.dir_out = true;
+
+	/*
+	 * if we're using dma, we need to set the next-endpoint pointer
+	 * to be something valid.
+	 */
+
+	if (using_dma(hsotg)) {
+		u32 next = DXEPCTL_NEXTEP((epnum + 1) % 15);
+
+		if (dir_in)
+			dwc2_writel(hsotg, next, DIEPCTL(epnum));
+		else
+			dwc2_writel(hsotg, next, DOEPCTL(epnum));
+	}
+}
+
+/**
+ * dwc2_hsotg_hw_cfg - read HW configuration registers
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ * Read the USB core HW configuration registers
+ */
+static int dwc2_hsotg_hw_cfg(struct dwc2_hsotg *hsotg)
+{
+	u32 cfg;
+	u32 ep_type;
+	u32 i;
+
+	/* check hardware configuration */
+
+	hsotg->num_of_eps = hsotg->hw_params.num_dev_ep;
+
+	/* Add ep0 */
+	hsotg->num_of_eps++;
+
+	hsotg->eps_in[0] = devm_kzalloc(hsotg->dev,
+					sizeof(struct dwc2_hsotg_ep),
+					GFP_KERNEL);
+	if (!hsotg->eps_in[0])
+		return -ENOMEM;
+	/* Same dwc2_hsotg_ep is used in both directions for ep0 */
+	hsotg->eps_out[0] = hsotg->eps_in[0];
+
+	cfg = hsotg->hw_params.dev_ep_dirs;
+	for (i = 1, cfg >>= 2; i < hsotg->num_of_eps; i++, cfg >>= 2) {
+		ep_type = cfg & 3;
+		/* Direction in or both */
+		if (!(ep_type & 2)) {
+			hsotg->eps_in[i] = devm_kzalloc(hsotg->dev,
+				sizeof(struct dwc2_hsotg_ep), GFP_KERNEL);
+			if (!hsotg->eps_in[i])
+				return -ENOMEM;
+		}
+		/* Direction out or both */
+		if (!(ep_type & 1)) {
+			hsotg->eps_out[i] = devm_kzalloc(hsotg->dev,
+				sizeof(struct dwc2_hsotg_ep), GFP_KERNEL);
+			if (!hsotg->eps_out[i])
+				return -ENOMEM;
+		}
+	}
+
+	hsotg->fifo_mem = hsotg->hw_params.total_fifo_size;
+	hsotg->dedicated_fifos = hsotg->hw_params.en_multiple_tx_fifo;
+
+	dev_info(hsotg->dev, "EPs: %d, %s fifos, %d entries in SPRAM\n",
+		 hsotg->num_of_eps,
+		 hsotg->dedicated_fifos ? "dedicated" : "shared",
+		 hsotg->fifo_mem);
+	return 0;
+}
+
+/**
+ * dwc2_hsotg_dump - dump state of the udc
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ */
+static void dwc2_hsotg_dump(struct dwc2_hsotg *hsotg)
+{
+#ifdef DEBUG
+	struct device *dev = hsotg->dev;
+	u32 val;
+	int idx;
+
+	dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n",
+		 dwc2_readl(hsotg, DCFG), dwc2_readl(hsotg, DCTL),
+		 dwc2_readl(hsotg, DIEPMSK));
+
+	dev_info(dev, "GAHBCFG=0x%08x, GHWCFG1=0x%08x\n",
+		 dwc2_readl(hsotg, GAHBCFG), dwc2_readl(hsotg, GHWCFG1));
+
+	dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
+		 dwc2_readl(hsotg, GRXFSIZ), dwc2_readl(hsotg, GNPTXFSIZ));
+
+	/* show periodic fifo settings */
+
+	for (idx = 1; idx < hsotg->num_of_eps; idx++) {
+		val = dwc2_readl(hsotg, DPTXFSIZN(idx));
+		dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx,
+			 val >> FIFOSIZE_DEPTH_SHIFT,
+			 val & FIFOSIZE_STARTADDR_MASK);
+	}
+
+	for (idx = 0; idx < hsotg->num_of_eps; idx++) {
+		dev_info(dev,
+			 "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx,
+			 dwc2_readl(hsotg, DIEPCTL(idx)),
+			 dwc2_readl(hsotg, DIEPTSIZ(idx)),
+			 dwc2_readl(hsotg, DIEPDMA(idx)));
+
+		val = dwc2_readl(hsotg, DOEPCTL(idx));
+		dev_info(dev,
+			 "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n",
+			 idx, dwc2_readl(hsotg, DOEPCTL(idx)),
+			 dwc2_readl(hsotg, DOEPTSIZ(idx)),
+			 dwc2_readl(hsotg, DOEPDMA(idx)));
+	}
+
+	dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n",
+		 dwc2_readl(hsotg, DVBUSDIS), dwc2_readl(hsotg, DVBUSPULSE));
+#endif
+}
+
+/**
+ * dwc2_gadget_init - init function for gadget
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ */
+int dwc2_gadget_init(struct dwc2_hsotg *hsotg)
+{
+	struct device *dev = hsotg->dev;
+	int epnum;
+	int ret;
+
+	/* Dump fifo information */
+	dev_dbg(dev, "NonPeriodic TXFIFO size: %d\n",
+		hsotg->params.g_np_tx_fifo_size);
+	dev_dbg(dev, "RXFIFO size: %d\n", hsotg->params.g_rx_fifo_size);
+
+	switch (hsotg->params.speed) {
+	case DWC2_SPEED_PARAM_LOW:
+		hsotg->gadget.max_speed = USB_SPEED_LOW;
+		break;
+	case DWC2_SPEED_PARAM_FULL:
+		hsotg->gadget.max_speed = USB_SPEED_FULL;
+		break;
+	default:
+		hsotg->gadget.max_speed = USB_SPEED_HIGH;
+		break;
+	}
+
+	hsotg->gadget.ops = &dwc2_hsotg_gadget_ops;
+	hsotg->gadget.name = dev_name(dev);
+	hsotg->gadget.otg_caps = &hsotg->params.otg_caps;
+	hsotg->remote_wakeup_allowed = 0;
+
+	if (hsotg->params.lpm)
+		hsotg->gadget.lpm_capable = true;
+
+	if (hsotg->dr_mode == USB_DR_MODE_OTG)
+		hsotg->gadget.is_otg = 1;
+	else if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
+		hsotg->op_state = OTG_STATE_B_PERIPHERAL;
+
+	ret = dwc2_hsotg_hw_cfg(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "Hardware configuration failed: %d\n", ret);
+		return ret;
+	}
+
+	hsotg->ctrl_buff = devm_kzalloc(hsotg->dev,
+			DWC2_CTRL_BUFF_SIZE, GFP_KERNEL);
+	if (!hsotg->ctrl_buff)
+		return -ENOMEM;
+
+	hsotg->ep0_buff = devm_kzalloc(hsotg->dev,
+			DWC2_CTRL_BUFF_SIZE, GFP_KERNEL);
+	if (!hsotg->ep0_buff)
+		return -ENOMEM;
+
+	if (using_desc_dma(hsotg)) {
+		ret = dwc2_gadget_alloc_ctrl_desc_chains(hsotg);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = devm_request_irq(hsotg->dev, hsotg->irq, dwc2_hsotg_irq,
+			       IRQF_SHARED, dev_name(hsotg->dev), hsotg);
+	if (ret < 0) {
+		dev_err(dev, "cannot claim IRQ for gadget\n");
+		return ret;
+	}
+
+	/* hsotg->num_of_eps holds number of EPs other than ep0 */
+
+	if (hsotg->num_of_eps == 0) {
+		dev_err(dev, "wrong number of EPs (zero)\n");
+		return -EINVAL;
+	}
+
+	/* setup endpoint information */
+
+	INIT_LIST_HEAD(&hsotg->gadget.ep_list);
+	hsotg->gadget.ep0 = &hsotg->eps_out[0]->ep;
+
+	/* allocate EP0 request */
+
+	hsotg->ctrl_req = dwc2_hsotg_ep_alloc_request(&hsotg->eps_out[0]->ep,
+						     GFP_KERNEL);
+	if (!hsotg->ctrl_req) {
+		dev_err(dev, "failed to allocate ctrl req\n");
+		return -ENOMEM;
+	}
+
+	/* initialise the endpoints now the core has been initialised */
+	for (epnum = 0; epnum < hsotg->num_of_eps; epnum++) {
+		if (hsotg->eps_in[epnum])
+			dwc2_hsotg_initep(hsotg, hsotg->eps_in[epnum],
+					  epnum, 1);
+		if (hsotg->eps_out[epnum])
+			dwc2_hsotg_initep(hsotg, hsotg->eps_out[epnum],
+					  epnum, 0);
+	}
+
+	dwc2_hsotg_dump(hsotg);
+
+	return 0;
+}
+
+/**
+ * dwc2_hsotg_remove - remove function for hsotg driver
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ */
+int dwc2_hsotg_remove(struct dwc2_hsotg *hsotg)
+{
+	usb_del_gadget_udc(&hsotg->gadget);
+	dwc2_hsotg_ep_free_request(&hsotg->eps_out[0]->ep, hsotg->ctrl_req);
+
+	return 0;
+}
+
+int dwc2_hsotg_suspend(struct dwc2_hsotg *hsotg)
+{
+	unsigned long flags;
+
+	if (hsotg->lx_state != DWC2_L0)
+		return 0;
+
+	if (hsotg->driver) {
+		int ep;
+
+		dev_info(hsotg->dev, "suspending usb gadget %s\n",
+			 hsotg->driver->driver.name);
+
+		spin_lock_irqsave(&hsotg->lock, flags);
+		if (hsotg->enabled)
+			dwc2_hsotg_core_disconnect(hsotg);
+		dwc2_hsotg_disconnect(hsotg);
+		hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+
+		for (ep = 1; ep < hsotg->num_of_eps; ep++) {
+			if (hsotg->eps_in[ep])
+				dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep);
+			if (hsotg->eps_out[ep])
+				dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep);
+		}
+	}
+
+	return 0;
+}
+
+int dwc2_hsotg_resume(struct dwc2_hsotg *hsotg)
+{
+	unsigned long flags;
+
+	if (hsotg->lx_state == DWC2_L2)
+		return 0;
+
+	if (hsotg->driver) {
+		dev_info(hsotg->dev, "resuming usb gadget %s\n",
+			 hsotg->driver->driver.name);
+
+		spin_lock_irqsave(&hsotg->lock, flags);
+		dwc2_hsotg_core_init_disconnected(hsotg, false);
+		if (hsotg->enabled) {
+			/* Enable ACG feature in device mode,if supported */
+			dwc2_enable_acg(hsotg);
+			dwc2_hsotg_core_connect(hsotg);
+		}
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+	}
+
+	return 0;
+}
+
+/**
+ * dwc2_backup_device_registers() - Backup controller device registers.
+ * When suspending usb bus, registers needs to be backuped
+ * if controller power is disabled once suspended.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_dregs_backup *dr;
+	int i;
+
+	dev_dbg(hsotg->dev, "%s\n", __func__);
+
+	/* Backup dev regs */
+	dr = &hsotg->dr_backup;
+
+	dr->dcfg = dwc2_readl(hsotg, DCFG);
+	dr->dctl = dwc2_readl(hsotg, DCTL);
+	dr->daintmsk = dwc2_readl(hsotg, DAINTMSK);
+	dr->diepmsk = dwc2_readl(hsotg, DIEPMSK);
+	dr->doepmsk = dwc2_readl(hsotg, DOEPMSK);
+
+	for (i = 0; i < hsotg->num_of_eps; i++) {
+		/* Backup IN EPs */
+		dr->diepctl[i] = dwc2_readl(hsotg, DIEPCTL(i));
+
+		/* Ensure DATA PID is correctly configured */
+		if (dr->diepctl[i] & DXEPCTL_DPID)
+			dr->diepctl[i] |= DXEPCTL_SETD1PID;
+		else
+			dr->diepctl[i] |= DXEPCTL_SETD0PID;
+
+		dr->dieptsiz[i] = dwc2_readl(hsotg, DIEPTSIZ(i));
+		dr->diepdma[i] = dwc2_readl(hsotg, DIEPDMA(i));
+
+		/* Backup OUT EPs */
+		dr->doepctl[i] = dwc2_readl(hsotg, DOEPCTL(i));
+
+		/* Ensure DATA PID is correctly configured */
+		if (dr->doepctl[i] & DXEPCTL_DPID)
+			dr->doepctl[i] |= DXEPCTL_SETD1PID;
+		else
+			dr->doepctl[i] |= DXEPCTL_SETD0PID;
+
+		dr->doeptsiz[i] = dwc2_readl(hsotg, DOEPTSIZ(i));
+		dr->doepdma[i] = dwc2_readl(hsotg, DOEPDMA(i));
+		dr->dtxfsiz[i] = dwc2_readl(hsotg, DPTXFSIZN(i));
+	}
+	dr->valid = true;
+	return 0;
+}
+
+/**
+ * dwc2_restore_device_registers() - Restore controller device registers.
+ * When resuming usb bus, device registers needs to be restored
+ * if controller power were disabled.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @remote_wakeup: Indicates whether resume is initiated by Device or Host.
+ *
+ * Return: 0 if successful, negative error code otherwise
+ */
+int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg, int remote_wakeup)
+{
+	struct dwc2_dregs_backup *dr;
+	int i;
+
+	dev_dbg(hsotg->dev, "%s\n", __func__);
+
+	/* Restore dev regs */
+	dr = &hsotg->dr_backup;
+	if (!dr->valid) {
+		dev_err(hsotg->dev, "%s: no device registers to restore\n",
+			__func__);
+		return -EINVAL;
+	}
+	dr->valid = false;
+
+	if (!remote_wakeup)
+		dwc2_writel(hsotg, dr->dctl, DCTL);
+
+	dwc2_writel(hsotg, dr->daintmsk, DAINTMSK);
+	dwc2_writel(hsotg, dr->diepmsk, DIEPMSK);
+	dwc2_writel(hsotg, dr->doepmsk, DOEPMSK);
+
+	for (i = 0; i < hsotg->num_of_eps; i++) {
+		/* Restore IN EPs */
+		dwc2_writel(hsotg, dr->dieptsiz[i], DIEPTSIZ(i));
+		dwc2_writel(hsotg, dr->diepdma[i], DIEPDMA(i));
+		dwc2_writel(hsotg, dr->doeptsiz[i], DOEPTSIZ(i));
+		/** WA for enabled EPx's IN in DDMA mode. On entering to
+		 * hibernation wrong value read and saved from DIEPDMAx,
+		 * as result BNA interrupt asserted on hibernation exit
+		 * by restoring from saved area.
+		 */
+		if (using_desc_dma(hsotg) &&
+		    (dr->diepctl[i] & DXEPCTL_EPENA))
+			dr->diepdma[i] = hsotg->eps_in[i]->desc_list_dma;
+		dwc2_writel(hsotg, dr->dtxfsiz[i], DPTXFSIZN(i));
+		dwc2_writel(hsotg, dr->diepctl[i], DIEPCTL(i));
+		/* Restore OUT EPs */
+		dwc2_writel(hsotg, dr->doeptsiz[i], DOEPTSIZ(i));
+		/* WA for enabled EPx's OUT in DDMA mode. On entering to
+		 * hibernation wrong value read and saved from DOEPDMAx,
+		 * as result BNA interrupt asserted on hibernation exit
+		 * by restoring from saved area.
+		 */
+		if (using_desc_dma(hsotg) &&
+		    (dr->doepctl[i] & DXEPCTL_EPENA))
+			dr->doepdma[i] = hsotg->eps_out[i]->desc_list_dma;
+		dwc2_writel(hsotg, dr->doepdma[i], DOEPDMA(i));
+		dwc2_writel(hsotg, dr->doepctl[i], DOEPCTL(i));
+	}
+
+	return 0;
+}
+
+/**
+ * dwc2_gadget_init_lpm - Configure the core to support LPM in device mode
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ */
+void dwc2_gadget_init_lpm(struct dwc2_hsotg *hsotg)
+{
+	u32 val;
+
+	if (!hsotg->params.lpm)
+		return;
+
+	val = GLPMCFG_LPMCAP | GLPMCFG_APPL1RES;
+	val |= hsotg->params.hird_threshold_en ? GLPMCFG_HIRD_THRES_EN : 0;
+	val |= hsotg->params.lpm_clock_gating ? GLPMCFG_ENBLSLPM : 0;
+	val |= hsotg->params.hird_threshold << GLPMCFG_HIRD_THRES_SHIFT;
+	val |= hsotg->params.besl ? GLPMCFG_ENBESL : 0;
+	val |= GLPMCFG_LPM_REJECT_CTRL_CONTROL;
+	val |= GLPMCFG_LPM_ACCEPT_CTRL_ISOC;
+	dwc2_writel(hsotg, val, GLPMCFG);
+	dev_dbg(hsotg->dev, "GLPMCFG=0x%08x\n", dwc2_readl(hsotg, GLPMCFG));
+
+	/* Unmask WKUP_ALERT Interrupt */
+	if (hsotg->params.service_interval)
+		dwc2_set_bit(hsotg, GINTMSK2, GINTMSK2_WKUP_ALERT_INT_MSK);
+}
+
+/**
+ * dwc2_gadget_program_ref_clk - Program GREFCLK register in device mode
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ */
+void dwc2_gadget_program_ref_clk(struct dwc2_hsotg *hsotg)
+{
+	u32 val = 0;
+
+	val |= GREFCLK_REF_CLK_MODE;
+	val |= hsotg->params.ref_clk_per << GREFCLK_REFCLKPER_SHIFT;
+	val |= hsotg->params.sof_cnt_wkup_alert <<
+	       GREFCLK_SOF_CNT_WKUP_ALERT_SHIFT;
+
+	dwc2_writel(hsotg, val, GREFCLK);
+	dev_dbg(hsotg->dev, "GREFCLK=0x%08x\n", dwc2_readl(hsotg, GREFCLK));
+}
+
+/**
+ * dwc2_gadget_enter_hibernation() - Put controller in Hibernation.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ * Return non-zero if failed to enter to hibernation.
+ */
+int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg)
+{
+	u32 gpwrdn;
+	int ret = 0;
+
+	/* Change to L2(suspend) state */
+	hsotg->lx_state = DWC2_L2;
+	dev_dbg(hsotg->dev, "Start of hibernation completed\n");
+	ret = dwc2_backup_global_registers(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to backup global registers\n",
+			__func__);
+		return ret;
+	}
+	ret = dwc2_backup_device_registers(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to backup device registers\n",
+			__func__);
+		return ret;
+	}
+
+	gpwrdn = GPWRDN_PWRDNRSTN;
+	gpwrdn |= GPWRDN_PMUACTV;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Set flag to indicate that we are in hibernation */
+	hsotg->hibernated = 1;
+
+	/* Enable interrupts from wake up logic */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn |= GPWRDN_PMUINTSEL;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Unmask device mode interrupts in GPWRDN */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn |= GPWRDN_RST_DET_MSK;
+	gpwrdn |= GPWRDN_LNSTSCHG_MSK;
+	gpwrdn |= GPWRDN_STS_CHGINT_MSK;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Enable Power Down Clamp */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn |= GPWRDN_PWRDNCLMP;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Switch off VDD */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn |= GPWRDN_PWRDNSWTCH;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Save gpwrdn register for further usage if stschng interrupt */
+	hsotg->gr_backup.gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	dev_dbg(hsotg->dev, "Hibernation completed\n");
+
+	return ret;
+}
+
+/**
+ * dwc2_gadget_exit_hibernation()
+ * This function is for exiting from Device mode hibernation by host initiated
+ * resume/reset and device initiated remote-wakeup.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @rem_wakeup: indicates whether resume is initiated by Device or Host.
+ * @reset: indicates whether resume is initiated by Reset.
+ *
+ * Return non-zero if failed to exit from hibernation.
+ */
+int dwc2_gadget_exit_hibernation(struct dwc2_hsotg *hsotg,
+				 int rem_wakeup, int reset)
+{
+	u32 pcgcctl;
+	u32 gpwrdn;
+	u32 dctl;
+	int ret = 0;
+	struct dwc2_gregs_backup *gr;
+	struct dwc2_dregs_backup *dr;
+
+	gr = &hsotg->gr_backup;
+	dr = &hsotg->dr_backup;
+
+	if (!hsotg->hibernated) {
+		dev_dbg(hsotg->dev, "Already exited from Hibernation\n");
+		return 1;
+	}
+	dev_dbg(hsotg->dev,
+		"%s: called with rem_wakeup = %d reset = %d\n",
+		__func__, rem_wakeup, reset);
+
+	dwc2_hib_restore_common(hsotg, rem_wakeup, 0);
+
+	if (!reset) {
+		/* Clear all pending interupts */
+		dwc2_writel(hsotg, 0xffffffff, GINTSTS);
+	}
+
+	/* De-assert Restore */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn &= ~GPWRDN_RESTORE;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	if (!rem_wakeup) {
+		pcgcctl = dwc2_readl(hsotg, PCGCTL);
+		pcgcctl &= ~PCGCTL_RSTPDWNMODULE;
+		dwc2_writel(hsotg, pcgcctl, PCGCTL);
+	}
+
+	/* Restore GUSBCFG, DCFG and DCTL */
+	dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
+	dwc2_writel(hsotg, dr->dcfg, DCFG);
+	dwc2_writel(hsotg, dr->dctl, DCTL);
+
+	/* On USB Reset, reset device address to zero */
+	if (reset)
+		dwc2_clear_bit(hsotg, DCFG, DCFG_DEVADDR_MASK);
+
+	/* De-assert Wakeup Logic */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn &= ~GPWRDN_PMUACTV;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+
+	if (rem_wakeup) {
+		udelay(10);
+		/* Start Remote Wakeup Signaling */
+		dwc2_writel(hsotg, dr->dctl | DCTL_RMTWKUPSIG, DCTL);
+	} else {
+		udelay(50);
+		/* Set Device programming done bit */
+		dctl = dwc2_readl(hsotg, DCTL);
+		dctl |= DCTL_PWRONPRGDONE;
+		dwc2_writel(hsotg, dctl, DCTL);
+	}
+	/* Wait for interrupts which must be cleared */
+	mdelay(2);
+	/* Clear all pending interupts */
+	dwc2_writel(hsotg, 0xffffffff, GINTSTS);
+
+	/* Restore global registers */
+	ret = dwc2_restore_global_registers(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to restore registers\n",
+			__func__);
+		return ret;
+	}
+
+	/* Restore device registers */
+	ret = dwc2_restore_device_registers(hsotg, rem_wakeup);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to restore device registers\n",
+			__func__);
+		return ret;
+	}
+
+	if (rem_wakeup) {
+		mdelay(10);
+		dctl = dwc2_readl(hsotg, DCTL);
+		dctl &= ~DCTL_RMTWKUPSIG;
+		dwc2_writel(hsotg, dctl, DCTL);
+	}
+
+	hsotg->hibernated = 0;
+	hsotg->lx_state = DWC2_L0;
+	dev_dbg(hsotg->dev, "Hibernation recovery completes here\n");
+
+	return ret;
+}
+
+/**
+ * dwc2_gadget_enter_partial_power_down() - Put controller in partial
+ * power down.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ * Return: non-zero if failed to enter device partial power down.
+ *
+ * This function is for entering device mode partial power down.
+ */
+int dwc2_gadget_enter_partial_power_down(struct dwc2_hsotg *hsotg)
+{
+	u32 pcgcctl;
+	int ret = 0;
+
+	dev_dbg(hsotg->dev, "Entering device partial power down started.\n");
+
+	/* Backup all registers */
+	ret = dwc2_backup_global_registers(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to backup global registers\n",
+			__func__);
+		return ret;
+	}
+
+	ret = dwc2_backup_device_registers(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to backup device registers\n",
+			__func__);
+		return ret;
+	}
+
+	/*
+	 * Clear any pending interrupts since dwc2 will not be able to
+	 * clear them after entering partial_power_down.
+	 */
+	dwc2_writel(hsotg, 0xffffffff, GINTSTS);
+
+	/* Put the controller in low power state */
+	pcgcctl = dwc2_readl(hsotg, PCGCTL);
+
+	pcgcctl |= PCGCTL_PWRCLMP;
+	dwc2_writel(hsotg, pcgcctl, PCGCTL);
+	udelay(5);
+
+	pcgcctl |= PCGCTL_RSTPDWNMODULE;
+	dwc2_writel(hsotg, pcgcctl, PCGCTL);
+	udelay(5);
+
+	pcgcctl |= PCGCTL_STOPPCLK;
+	dwc2_writel(hsotg, pcgcctl, PCGCTL);
+
+	/* Set in_ppd flag to 1 as here core enters suspend. */
+	hsotg->in_ppd = 1;
+	hsotg->lx_state = DWC2_L2;
+
+	dev_dbg(hsotg->dev, "Entering device partial power down completed.\n");
+
+	return ret;
+}
+
+/*
+ * dwc2_gadget_exit_partial_power_down() - Exit controller from device partial
+ * power down.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @restore: indicates whether need to restore the registers or not.
+ *
+ * Return: non-zero if failed to exit device partial power down.
+ *
+ * This function is for exiting from device mode partial power down.
+ */
+int dwc2_gadget_exit_partial_power_down(struct dwc2_hsotg *hsotg,
+					bool restore)
+{
+	u32 pcgcctl;
+	u32 dctl;
+	struct dwc2_dregs_backup *dr;
+	int ret = 0;
+
+	dr = &hsotg->dr_backup;
+
+	dev_dbg(hsotg->dev, "Exiting device partial Power Down started.\n");
+
+	pcgcctl = dwc2_readl(hsotg, PCGCTL);
+	pcgcctl &= ~PCGCTL_STOPPCLK;
+	dwc2_writel(hsotg, pcgcctl, PCGCTL);
+
+	pcgcctl = dwc2_readl(hsotg, PCGCTL);
+	pcgcctl &= ~PCGCTL_PWRCLMP;
+	dwc2_writel(hsotg, pcgcctl, PCGCTL);
+
+	pcgcctl = dwc2_readl(hsotg, PCGCTL);
+	pcgcctl &= ~PCGCTL_RSTPDWNMODULE;
+	dwc2_writel(hsotg, pcgcctl, PCGCTL);
+
+	udelay(100);
+	if (restore) {
+		ret = dwc2_restore_global_registers(hsotg);
+		if (ret) {
+			dev_err(hsotg->dev, "%s: failed to restore registers\n",
+				__func__);
+			return ret;
+		}
+		/* Restore DCFG */
+		dwc2_writel(hsotg, dr->dcfg, DCFG);
+
+		ret = dwc2_restore_device_registers(hsotg, 0);
+		if (ret) {
+			dev_err(hsotg->dev, "%s: failed to restore device registers\n",
+				__func__);
+			return ret;
+		}
+	}
+
+	/* Set the Power-On Programming done bit */
+	dctl = dwc2_readl(hsotg, DCTL);
+	dctl |= DCTL_PWRONPRGDONE;
+	dwc2_writel(hsotg, dctl, DCTL);
+
+	/* Set in_ppd flag to 0 as here core exits from suspend. */
+	hsotg->in_ppd = 0;
+	hsotg->lx_state = DWC2_L0;
+
+	dev_dbg(hsotg->dev, "Exiting device partial Power Down completed.\n");
+	return ret;
+}
+
+/**
+ * dwc2_gadget_enter_clock_gating() - Put controller in clock gating.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ * Return: non-zero if failed to enter device partial power down.
+ *
+ * This function is for entering device mode clock gating.
+ */
+void dwc2_gadget_enter_clock_gating(struct dwc2_hsotg *hsotg)
+{
+	u32 pcgctl;
+
+	dev_dbg(hsotg->dev, "Entering device clock gating.\n");
+
+	/* Set the Phy Clock bit as suspend is received. */
+	pcgctl = dwc2_readl(hsotg, PCGCTL);
+	pcgctl |= PCGCTL_STOPPCLK;
+	dwc2_writel(hsotg, pcgctl, PCGCTL);
+	udelay(5);
+
+	/* Set the Gate hclk as suspend is received. */
+	pcgctl = dwc2_readl(hsotg, PCGCTL);
+	pcgctl |= PCGCTL_GATEHCLK;
+	dwc2_writel(hsotg, pcgctl, PCGCTL);
+	udelay(5);
+
+	hsotg->lx_state = DWC2_L2;
+	hsotg->bus_suspended = true;
+}
+
+/*
+ * dwc2_gadget_exit_clock_gating() - Exit controller from device clock gating.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @rem_wakeup: indicates whether remote wake up is enabled.
+ *
+ * This function is for exiting from device mode clock gating.
+ */
+void dwc2_gadget_exit_clock_gating(struct dwc2_hsotg *hsotg, int rem_wakeup)
+{
+	u32 pcgctl;
+	u32 dctl;
+
+	dev_dbg(hsotg->dev, "Exiting device clock gating.\n");
+
+	/* Clear the Gate hclk. */
+	pcgctl = dwc2_readl(hsotg, PCGCTL);
+	pcgctl &= ~PCGCTL_GATEHCLK;
+	dwc2_writel(hsotg, pcgctl, PCGCTL);
+	udelay(5);
+
+	/* Phy Clock bit. */
+	pcgctl = dwc2_readl(hsotg, PCGCTL);
+	pcgctl &= ~PCGCTL_STOPPCLK;
+	dwc2_writel(hsotg, pcgctl, PCGCTL);
+	udelay(5);
+
+	if (rem_wakeup) {
+		/* Set Remote Wakeup Signaling */
+		dctl = dwc2_readl(hsotg, DCTL);
+		dctl |= DCTL_RMTWKUPSIG;
+		dwc2_writel(hsotg, dctl, DCTL);
+	}
+
+	/* Change to L0 state */
+	call_gadget(hsotg, resume);
+	hsotg->lx_state = DWC2_L0;
+	hsotg->bus_suspended = false;
+}
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
new file mode 100644
index 000000000..35c7a4df8
--- /dev/null
+++ b/drivers/usb/dwc2/hcd.c
@@ -0,0 +1,5954 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * hcd.c - DesignWare HS OTG Controller host-mode routines
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ */
+
+/*
+ * This file contains the core HCD code, and implements the Linux hc_driver
+ * API
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+#include <linux/usb/of.h>
+
+#include "core.h"
+#include "hcd.h"
+
+/*
+ * =========================================================================
+ *  Host Core Layer Functions
+ * =========================================================================
+ */
+
+/**
+ * dwc2_enable_common_interrupts() - Initializes the commmon interrupts,
+ * used in both device and host modes
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg)
+{
+	u32 intmsk;
+
+	/* Clear any pending OTG Interrupts */
+	dwc2_writel(hsotg, 0xffffffff, GOTGINT);
+
+	/* Clear any pending interrupts */
+	dwc2_writel(hsotg, 0xffffffff, GINTSTS);
+
+	/* Enable the interrupts in the GINTMSK */
+	intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT;
+
+	if (!hsotg->params.host_dma)
+		intmsk |= GINTSTS_RXFLVL;
+	if (!hsotg->params.external_id_pin_ctl)
+		intmsk |= GINTSTS_CONIDSTSCHNG;
+
+	intmsk |= GINTSTS_WKUPINT | GINTSTS_USBSUSP |
+		  GINTSTS_SESSREQINT;
+
+	if (dwc2_is_device_mode(hsotg) && hsotg->params.lpm)
+		intmsk |= GINTSTS_LPMTRANRCVD;
+
+	dwc2_writel(hsotg, intmsk, GINTMSK);
+}
+
+static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg)
+{
+	u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);
+
+	switch (hsotg->hw_params.arch) {
+	case GHWCFG2_EXT_DMA_ARCH:
+		dev_err(hsotg->dev, "External DMA Mode not supported\n");
+		return -EINVAL;
+
+	case GHWCFG2_INT_DMA_ARCH:
+		dev_dbg(hsotg->dev, "Internal DMA Mode\n");
+		if (hsotg->params.ahbcfg != -1) {
+			ahbcfg &= GAHBCFG_CTRL_MASK;
+			ahbcfg |= hsotg->params.ahbcfg &
+				  ~GAHBCFG_CTRL_MASK;
+		}
+		break;
+
+	case GHWCFG2_SLAVE_ONLY_ARCH:
+	default:
+		dev_dbg(hsotg->dev, "Slave Only Mode\n");
+		break;
+	}
+
+	if (hsotg->params.host_dma)
+		ahbcfg |= GAHBCFG_DMA_EN;
+	else
+		hsotg->params.dma_desc_enable = false;
+
+	dwc2_writel(hsotg, ahbcfg, GAHBCFG);
+
+	return 0;
+}
+
+static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg)
+{
+	u32 usbcfg;
+
+	usbcfg = dwc2_readl(hsotg, GUSBCFG);
+	usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP);
+
+	switch (hsotg->hw_params.op_mode) {
+	case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
+		if (hsotg->params.otg_caps.hnp_support &&
+		    hsotg->params.otg_caps.srp_support)
+			usbcfg |= GUSBCFG_HNPCAP;
+		fallthrough;
+
+	case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
+	case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
+	case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
+		if (hsotg->params.otg_caps.srp_support)
+			usbcfg |= GUSBCFG_SRPCAP;
+		break;
+
+	case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE:
+	case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE:
+	case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST:
+	default:
+		break;
+	}
+
+	dwc2_writel(hsotg, usbcfg, GUSBCFG);
+}
+
+static int dwc2_vbus_supply_init(struct dwc2_hsotg *hsotg)
+{
+	if (hsotg->vbus_supply)
+		return regulator_enable(hsotg->vbus_supply);
+
+	return 0;
+}
+
+static int dwc2_vbus_supply_exit(struct dwc2_hsotg *hsotg)
+{
+	if (hsotg->vbus_supply)
+		return regulator_disable(hsotg->vbus_supply);
+
+	return 0;
+}
+
+/**
+ * dwc2_enable_host_interrupts() - Enables the Host mode interrupts
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg)
+{
+	u32 intmsk;
+
+	dev_dbg(hsotg->dev, "%s()\n", __func__);
+
+	/* Disable all interrupts */
+	dwc2_writel(hsotg, 0, GINTMSK);
+	dwc2_writel(hsotg, 0, HAINTMSK);
+
+	/* Enable the common interrupts */
+	dwc2_enable_common_interrupts(hsotg);
+
+	/* Enable host mode interrupts without disturbing common interrupts */
+	intmsk = dwc2_readl(hsotg, GINTMSK);
+	intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT;
+	dwc2_writel(hsotg, intmsk, GINTMSK);
+}
+
+/**
+ * dwc2_disable_host_interrupts() - Disables the Host Mode interrupts
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg)
+{
+	u32 intmsk = dwc2_readl(hsotg, GINTMSK);
+
+	/* Disable host mode interrupts without disturbing common interrupts */
+	intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT |
+		    GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | GINTSTS_DISCONNINT);
+	dwc2_writel(hsotg, intmsk, GINTMSK);
+}
+
+/*
+ * dwc2_calculate_dynamic_fifo() - Calculates the default fifo size
+ * For system that have a total fifo depth that is smaller than the default
+ * RX + TX fifo size.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_calculate_dynamic_fifo(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *params = &hsotg->params;
+	struct dwc2_hw_params *hw = &hsotg->hw_params;
+	u32 rxfsiz, nptxfsiz, ptxfsiz, total_fifo_size;
+
+	total_fifo_size = hw->total_fifo_size;
+	rxfsiz = params->host_rx_fifo_size;
+	nptxfsiz = params->host_nperio_tx_fifo_size;
+	ptxfsiz = params->host_perio_tx_fifo_size;
+
+	/*
+	 * Will use Method 2 defined in the DWC2 spec: minimum FIFO depth
+	 * allocation with support for high bandwidth endpoints. Synopsys
+	 * defines MPS(Max Packet size) for a periodic EP=1024, and for
+	 * non-periodic as 512.
+	 */
+	if (total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)) {
+		/*
+		 * For Buffer DMA mode/Scatter Gather DMA mode
+		 * 2 * ((Largest Packet size / 4) + 1 + 1) + n
+		 * with n = number of host channel.
+		 * 2 * ((1024/4) + 2) = 516
+		 */
+		rxfsiz = 516 + hw->host_channels;
+
+		/*
+		 * min non-periodic tx fifo depth
+		 * 2 * (largest non-periodic USB packet used / 4)
+		 * 2 * (512/4) = 256
+		 */
+		nptxfsiz = 256;
+
+		/*
+		 * min periodic tx fifo depth
+		 * (largest packet size*MC)/4
+		 * (1024 * 3)/4 = 768
+		 */
+		ptxfsiz = 768;
+
+		params->host_rx_fifo_size = rxfsiz;
+		params->host_nperio_tx_fifo_size = nptxfsiz;
+		params->host_perio_tx_fifo_size = ptxfsiz;
+	}
+
+	/*
+	 * If the summation of RX, NPTX and PTX fifo sizes is still
+	 * bigger than the total_fifo_size, then we have a problem.
+	 *
+	 * We won't be able to allocate as many endpoints. Right now,
+	 * we're just printing an error message, but ideally this FIFO
+	 * allocation algorithm would be improved in the future.
+	 *
+	 * FIXME improve this FIFO allocation algorithm.
+	 */
+	if (unlikely(total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)))
+		dev_err(hsotg->dev, "invalid fifo sizes\n");
+}
+
+static void dwc2_config_fifos(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *params = &hsotg->params;
+	u32 nptxfsiz, hptxfsiz, dfifocfg, grxfsiz;
+
+	if (!params->enable_dynamic_fifo)
+		return;
+
+	dwc2_calculate_dynamic_fifo(hsotg);
+
+	/* Rx FIFO */
+	grxfsiz = dwc2_readl(hsotg, GRXFSIZ);
+	dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz);
+	grxfsiz &= ~GRXFSIZ_DEPTH_MASK;
+	grxfsiz |= params->host_rx_fifo_size <<
+		   GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK;
+	dwc2_writel(hsotg, grxfsiz, GRXFSIZ);
+	dev_dbg(hsotg->dev, "new grxfsiz=%08x\n",
+		dwc2_readl(hsotg, GRXFSIZ));
+
+	/* Non-periodic Tx FIFO */
+	dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n",
+		dwc2_readl(hsotg, GNPTXFSIZ));
+	nptxfsiz = params->host_nperio_tx_fifo_size <<
+		   FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
+	nptxfsiz |= params->host_rx_fifo_size <<
+		    FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
+	dwc2_writel(hsotg, nptxfsiz, GNPTXFSIZ);
+	dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n",
+		dwc2_readl(hsotg, GNPTXFSIZ));
+
+	/* Periodic Tx FIFO */
+	dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n",
+		dwc2_readl(hsotg, HPTXFSIZ));
+	hptxfsiz = params->host_perio_tx_fifo_size <<
+		   FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
+	hptxfsiz |= (params->host_rx_fifo_size +
+		     params->host_nperio_tx_fifo_size) <<
+		    FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
+	dwc2_writel(hsotg, hptxfsiz, HPTXFSIZ);
+	dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n",
+		dwc2_readl(hsotg, HPTXFSIZ));
+
+	if (hsotg->params.en_multiple_tx_fifo &&
+	    hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_91a) {
+		/*
+		 * This feature was implemented in 2.91a version
+		 * Global DFIFOCFG calculation for Host mode -
+		 * include RxFIFO, NPTXFIFO and HPTXFIFO
+		 */
+		dfifocfg = dwc2_readl(hsotg, GDFIFOCFG);
+		dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK;
+		dfifocfg |= (params->host_rx_fifo_size +
+			     params->host_nperio_tx_fifo_size +
+			     params->host_perio_tx_fifo_size) <<
+			    GDFIFOCFG_EPINFOBASE_SHIFT &
+			    GDFIFOCFG_EPINFOBASE_MASK;
+		dwc2_writel(hsotg, dfifocfg, GDFIFOCFG);
+	}
+}
+
+/**
+ * dwc2_calc_frame_interval() - Calculates the correct frame Interval value for
+ * the HFIR register according to PHY type and speed
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * NOTE: The caller can modify the value of the HFIR register only after the
+ * Port Enable bit of the Host Port Control and Status register (HPRT.EnaPort)
+ * has been set
+ */
+u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg)
+{
+	u32 usbcfg;
+	u32 hprt0;
+	int clock = 60;	/* default value */
+
+	usbcfg = dwc2_readl(hsotg, GUSBCFG);
+	hprt0 = dwc2_readl(hsotg, HPRT0);
+
+	if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) &&
+	    !(usbcfg & GUSBCFG_PHYIF16))
+		clock = 60;
+	if ((usbcfg & GUSBCFG_PHYSEL) && hsotg->hw_params.fs_phy_type ==
+	    GHWCFG2_FS_PHY_TYPE_SHARED_ULPI)
+		clock = 48;
+	if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
+	    !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16))
+		clock = 30;
+	if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
+	    !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && !(usbcfg & GUSBCFG_PHYIF16))
+		clock = 60;
+	if ((usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
+	    !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16))
+		clock = 48;
+	if ((usbcfg & GUSBCFG_PHYSEL) && !(usbcfg & GUSBCFG_PHYIF16) &&
+	    hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_SHARED_UTMI)
+		clock = 48;
+	if ((usbcfg & GUSBCFG_PHYSEL) &&
+	    hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED)
+		clock = 48;
+
+	if ((hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT == HPRT0_SPD_HIGH_SPEED)
+		/* High speed case */
+		return 125 * clock - 1;
+
+	/* FS/LS case */
+	return 1000 * clock - 1;
+}
+
+/**
+ * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination
+ * buffer
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @dest:    Destination buffer for the packet
+ * @bytes:   Number of bytes to copy to the destination
+ */
+void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes)
+{
+	u32 *data_buf = (u32 *)dest;
+	int word_count = (bytes + 3) / 4;
+	int i;
+
+	/*
+	 * Todo: Account for the case where dest is not dword aligned. This
+	 * requires reading data from the FIFO into a u32 temp buffer, then
+	 * moving it into the data buffer.
+	 */
+
+	dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes);
+
+	for (i = 0; i < word_count; i++, data_buf++)
+		*data_buf = dwc2_readl(hsotg, HCFIFO(0));
+}
+
+/**
+ * dwc2_dump_channel_info() - Prints the state of a host channel
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan:  Pointer to the channel to dump
+ *
+ * Must be called with interrupt disabled and spinlock held
+ *
+ * NOTE: This function will be removed once the peripheral controller code
+ * is integrated and the driver is stable
+ */
+static void dwc2_dump_channel_info(struct dwc2_hsotg *hsotg,
+				   struct dwc2_host_chan *chan)
+{
+#ifdef VERBOSE_DEBUG
+	int num_channels = hsotg->params.host_channels;
+	struct dwc2_qh *qh;
+	u32 hcchar;
+	u32 hcsplt;
+	u32 hctsiz;
+	u32 hc_dma;
+	int i;
+
+	if (!chan)
+		return;
+
+	hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
+	hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num));
+	hctsiz = dwc2_readl(hsotg, HCTSIZ(chan->hc_num));
+	hc_dma = dwc2_readl(hsotg, HCDMA(chan->hc_num));
+
+	dev_dbg(hsotg->dev, "  Assigned to channel %p:\n", chan);
+	dev_dbg(hsotg->dev, "    hcchar 0x%08x, hcsplt 0x%08x\n",
+		hcchar, hcsplt);
+	dev_dbg(hsotg->dev, "    hctsiz 0x%08x, hc_dma 0x%08x\n",
+		hctsiz, hc_dma);
+	dev_dbg(hsotg->dev, "    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
+		chan->dev_addr, chan->ep_num, chan->ep_is_in);
+	dev_dbg(hsotg->dev, "    ep_type: %d\n", chan->ep_type);
+	dev_dbg(hsotg->dev, "    max_packet: %d\n", chan->max_packet);
+	dev_dbg(hsotg->dev, "    data_pid_start: %d\n", chan->data_pid_start);
+	dev_dbg(hsotg->dev, "    xfer_started: %d\n", chan->xfer_started);
+	dev_dbg(hsotg->dev, "    halt_status: %d\n", chan->halt_status);
+	dev_dbg(hsotg->dev, "    xfer_buf: %p\n", chan->xfer_buf);
+	dev_dbg(hsotg->dev, "    xfer_dma: %08lx\n",
+		(unsigned long)chan->xfer_dma);
+	dev_dbg(hsotg->dev, "    xfer_len: %d\n", chan->xfer_len);
+	dev_dbg(hsotg->dev, "    qh: %p\n", chan->qh);
+	dev_dbg(hsotg->dev, "  NP inactive sched:\n");
+	list_for_each_entry(qh, &hsotg->non_periodic_sched_inactive,
+			    qh_list_entry)
+		dev_dbg(hsotg->dev, "    %p\n", qh);
+	dev_dbg(hsotg->dev, "  NP waiting sched:\n");
+	list_for_each_entry(qh, &hsotg->non_periodic_sched_waiting,
+			    qh_list_entry)
+		dev_dbg(hsotg->dev, "    %p\n", qh);
+	dev_dbg(hsotg->dev, "  NP active sched:\n");
+	list_for_each_entry(qh, &hsotg->non_periodic_sched_active,
+			    qh_list_entry)
+		dev_dbg(hsotg->dev, "    %p\n", qh);
+	dev_dbg(hsotg->dev, "  Channels:\n");
+	for (i = 0; i < num_channels; i++) {
+		struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i];
+
+		dev_dbg(hsotg->dev, "    %2d: %p\n", i, chan);
+	}
+#endif /* VERBOSE_DEBUG */
+}
+
+static int _dwc2_hcd_start(struct usb_hcd *hcd);
+
+static void dwc2_host_start(struct dwc2_hsotg *hsotg)
+{
+	struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg);
+
+	hcd->self.is_b_host = dwc2_hcd_is_b_host(hsotg);
+	_dwc2_hcd_start(hcd);
+}
+
+static void dwc2_host_disconnect(struct dwc2_hsotg *hsotg)
+{
+	struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg);
+
+	hcd->self.is_b_host = 0;
+}
+
+static void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context,
+			       int *hub_addr, int *hub_port)
+{
+	struct urb *urb = context;
+
+	if (urb->dev->tt)
+		*hub_addr = urb->dev->tt->hub->devnum;
+	else
+		*hub_addr = 0;
+	*hub_port = urb->dev->ttport;
+}
+
+/*
+ * =========================================================================
+ *  Low Level Host Channel Access Functions
+ * =========================================================================
+ */
+
+static void dwc2_hc_enable_slave_ints(struct dwc2_hsotg *hsotg,
+				      struct dwc2_host_chan *chan)
+{
+	u32 hcintmsk = HCINTMSK_CHHLTD;
+
+	switch (chan->ep_type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+	case USB_ENDPOINT_XFER_BULK:
+		dev_vdbg(hsotg->dev, "control/bulk\n");
+		hcintmsk |= HCINTMSK_XFERCOMPL;
+		hcintmsk |= HCINTMSK_STALL;
+		hcintmsk |= HCINTMSK_XACTERR;
+		hcintmsk |= HCINTMSK_DATATGLERR;
+		if (chan->ep_is_in) {
+			hcintmsk |= HCINTMSK_BBLERR;
+		} else {
+			hcintmsk |= HCINTMSK_NAK;
+			hcintmsk |= HCINTMSK_NYET;
+			if (chan->do_ping)
+				hcintmsk |= HCINTMSK_ACK;
+		}
+
+		if (chan->do_split) {
+			hcintmsk |= HCINTMSK_NAK;
+			if (chan->complete_split)
+				hcintmsk |= HCINTMSK_NYET;
+			else
+				hcintmsk |= HCINTMSK_ACK;
+		}
+
+		if (chan->error_state)
+			hcintmsk |= HCINTMSK_ACK;
+		break;
+
+	case USB_ENDPOINT_XFER_INT:
+		if (dbg_perio())
+			dev_vdbg(hsotg->dev, "intr\n");
+		hcintmsk |= HCINTMSK_XFERCOMPL;
+		hcintmsk |= HCINTMSK_NAK;
+		hcintmsk |= HCINTMSK_STALL;
+		hcintmsk |= HCINTMSK_XACTERR;
+		hcintmsk |= HCINTMSK_DATATGLERR;
+		hcintmsk |= HCINTMSK_FRMOVRUN;
+
+		if (chan->ep_is_in)
+			hcintmsk |= HCINTMSK_BBLERR;
+		if (chan->error_state)
+			hcintmsk |= HCINTMSK_ACK;
+		if (chan->do_split) {
+			if (chan->complete_split)
+				hcintmsk |= HCINTMSK_NYET;
+			else
+				hcintmsk |= HCINTMSK_ACK;
+		}
+		break;
+
+	case USB_ENDPOINT_XFER_ISOC:
+		if (dbg_perio())
+			dev_vdbg(hsotg->dev, "isoc\n");
+		hcintmsk |= HCINTMSK_XFERCOMPL;
+		hcintmsk |= HCINTMSK_FRMOVRUN;
+		hcintmsk |= HCINTMSK_ACK;
+
+		if (chan->ep_is_in) {
+			hcintmsk |= HCINTMSK_XACTERR;
+			hcintmsk |= HCINTMSK_BBLERR;
+		}
+		break;
+	default:
+		dev_err(hsotg->dev, "## Unknown EP type ##\n");
+		break;
+	}
+
+	dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num));
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
+}
+
+static void dwc2_hc_enable_dma_ints(struct dwc2_hsotg *hsotg,
+				    struct dwc2_host_chan *chan)
+{
+	u32 hcintmsk = HCINTMSK_CHHLTD;
+
+	/*
+	 * For Descriptor DMA mode core halts the channel on AHB error.
+	 * Interrupt is not required.
+	 */
+	if (!hsotg->params.dma_desc_enable) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "desc DMA disabled\n");
+		hcintmsk |= HCINTMSK_AHBERR;
+	} else {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "desc DMA enabled\n");
+		if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+			hcintmsk |= HCINTMSK_XFERCOMPL;
+	}
+
+	if (chan->error_state && !chan->do_split &&
+	    chan->ep_type != USB_ENDPOINT_XFER_ISOC) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "setting ACK\n");
+		hcintmsk |= HCINTMSK_ACK;
+		if (chan->ep_is_in) {
+			hcintmsk |= HCINTMSK_DATATGLERR;
+			if (chan->ep_type != USB_ENDPOINT_XFER_INT)
+				hcintmsk |= HCINTMSK_NAK;
+		}
+	}
+
+	dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num));
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
+}
+
+static void dwc2_hc_enable_ints(struct dwc2_hsotg *hsotg,
+				struct dwc2_host_chan *chan)
+{
+	u32 intmsk;
+
+	if (hsotg->params.host_dma) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "DMA enabled\n");
+		dwc2_hc_enable_dma_ints(hsotg, chan);
+	} else {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "DMA disabled\n");
+		dwc2_hc_enable_slave_ints(hsotg, chan);
+	}
+
+	/* Enable the top level host channel interrupt */
+	intmsk = dwc2_readl(hsotg, HAINTMSK);
+	intmsk |= 1 << chan->hc_num;
+	dwc2_writel(hsotg, intmsk, HAINTMSK);
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk);
+
+	/* Make sure host channel interrupts are enabled */
+	intmsk = dwc2_readl(hsotg, GINTMSK);
+	intmsk |= GINTSTS_HCHINT;
+	dwc2_writel(hsotg, intmsk, GINTMSK);
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk);
+}
+
+/**
+ * dwc2_hc_init() - Prepares a host channel for transferring packets to/from
+ * a specific endpoint
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan:  Information needed to initialize the host channel
+ *
+ * The HCCHARn register is set up with the characteristics specified in chan.
+ * Host channel interrupts that may need to be serviced while this transfer is
+ * in progress are enabled.
+ */
+static void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
+{
+	u8 hc_num = chan->hc_num;
+	u32 hcintmsk;
+	u32 hcchar;
+	u32 hcsplt = 0;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	/* Clear old interrupt conditions for this host channel */
+	hcintmsk = 0xffffffff;
+	hcintmsk &= ~HCINTMSK_RESERVED14_31;
+	dwc2_writel(hsotg, hcintmsk, HCINT(hc_num));
+
+	/* Enable channel interrupts required for this transfer */
+	dwc2_hc_enable_ints(hsotg, chan);
+
+	/*
+	 * Program the HCCHARn register with the endpoint characteristics for
+	 * the current transfer
+	 */
+	hcchar = chan->dev_addr << HCCHAR_DEVADDR_SHIFT & HCCHAR_DEVADDR_MASK;
+	hcchar |= chan->ep_num << HCCHAR_EPNUM_SHIFT & HCCHAR_EPNUM_MASK;
+	if (chan->ep_is_in)
+		hcchar |= HCCHAR_EPDIR;
+	if (chan->speed == USB_SPEED_LOW)
+		hcchar |= HCCHAR_LSPDDEV;
+	hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK;
+	hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK;
+	dwc2_writel(hsotg, hcchar, HCCHAR(hc_num));
+	if (dbg_hc(chan)) {
+		dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n",
+			 hc_num, hcchar);
+
+		dev_vdbg(hsotg->dev, "%s: Channel %d\n",
+			 __func__, hc_num);
+		dev_vdbg(hsotg->dev, "	 Dev Addr: %d\n",
+			 chan->dev_addr);
+		dev_vdbg(hsotg->dev, "	 Ep Num: %d\n",
+			 chan->ep_num);
+		dev_vdbg(hsotg->dev, "	 Is In: %d\n",
+			 chan->ep_is_in);
+		dev_vdbg(hsotg->dev, "	 Is Low Speed: %d\n",
+			 chan->speed == USB_SPEED_LOW);
+		dev_vdbg(hsotg->dev, "	 Ep Type: %d\n",
+			 chan->ep_type);
+		dev_vdbg(hsotg->dev, "	 Max Pkt: %d\n",
+			 chan->max_packet);
+	}
+
+	/* Program the HCSPLT register for SPLITs */
+	if (chan->do_split) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev,
+				 "Programming HC %d with split --> %s\n",
+				 hc_num,
+				 chan->complete_split ? "CSPLIT" : "SSPLIT");
+		if (chan->complete_split)
+			hcsplt |= HCSPLT_COMPSPLT;
+		hcsplt |= chan->xact_pos << HCSPLT_XACTPOS_SHIFT &
+			  HCSPLT_XACTPOS_MASK;
+		hcsplt |= chan->hub_addr << HCSPLT_HUBADDR_SHIFT &
+			  HCSPLT_HUBADDR_MASK;
+		hcsplt |= chan->hub_port << HCSPLT_PRTADDR_SHIFT &
+			  HCSPLT_PRTADDR_MASK;
+		if (dbg_hc(chan)) {
+			dev_vdbg(hsotg->dev, "	  comp split %d\n",
+				 chan->complete_split);
+			dev_vdbg(hsotg->dev, "	  xact pos %d\n",
+				 chan->xact_pos);
+			dev_vdbg(hsotg->dev, "	  hub addr %d\n",
+				 chan->hub_addr);
+			dev_vdbg(hsotg->dev, "	  hub port %d\n",
+				 chan->hub_port);
+			dev_vdbg(hsotg->dev, "	  is_in %d\n",
+				 chan->ep_is_in);
+			dev_vdbg(hsotg->dev, "	  Max Pkt %d\n",
+				 chan->max_packet);
+			dev_vdbg(hsotg->dev, "	  xferlen %d\n",
+				 chan->xfer_len);
+		}
+	}
+
+	dwc2_writel(hsotg, hcsplt, HCSPLT(hc_num));
+}
+
+/**
+ * dwc2_hc_halt() - Attempts to halt a host channel
+ *
+ * @hsotg:       Controller register interface
+ * @chan:        Host channel to halt
+ * @halt_status: Reason for halting the channel
+ *
+ * This function should only be called in Slave mode or to abort a transfer in
+ * either Slave mode or DMA mode. Under normal circumstances in DMA mode, the
+ * controller halts the channel when the transfer is complete or a condition
+ * occurs that requires application intervention.
+ *
+ * In slave mode, checks for a free request queue entry, then sets the Channel
+ * Enable and Channel Disable bits of the Host Channel Characteristics
+ * register of the specified channel to intiate the halt. If there is no free
+ * request queue entry, sets only the Channel Disable bit of the HCCHARn
+ * register to flush requests for this channel. In the latter case, sets a
+ * flag to indicate that the host channel needs to be halted when a request
+ * queue slot is open.
+ *
+ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
+ * HCCHARn register. The controller ensures there is space in the request
+ * queue before submitting the halt request.
+ *
+ * Some time may elapse before the core flushes any posted requests for this
+ * host channel and halts. The Channel Halted interrupt handler completes the
+ * deactivation of the host channel.
+ */
+void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
+		  enum dwc2_halt_status halt_status)
+{
+	u32 nptxsts, hptxsts, hcchar;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	/*
+	 * In buffer DMA or external DMA mode channel can't be halted
+	 * for non-split periodic channels. At the end of the next
+	 * uframe/frame (in the worst case), the core generates a channel
+	 * halted and disables the channel automatically.
+	 */
+	if ((hsotg->params.g_dma && !hsotg->params.g_dma_desc) ||
+	    hsotg->hw_params.arch == GHWCFG2_EXT_DMA_ARCH) {
+		if (!chan->do_split &&
+		    (chan->ep_type == USB_ENDPOINT_XFER_ISOC ||
+		     chan->ep_type == USB_ENDPOINT_XFER_INT)) {
+			dev_err(hsotg->dev, "%s() Channel can't be halted\n",
+				__func__);
+			return;
+		}
+	}
+
+	if (halt_status == DWC2_HC_XFER_NO_HALT_STATUS)
+		dev_err(hsotg->dev, "!!! halt_status = %d !!!\n", halt_status);
+
+	if (halt_status == DWC2_HC_XFER_URB_DEQUEUE ||
+	    halt_status == DWC2_HC_XFER_AHB_ERR) {
+		/*
+		 * Disable all channel interrupts except Ch Halted. The QTD
+		 * and QH state associated with this transfer has been cleared
+		 * (in the case of URB_DEQUEUE), so the channel needs to be
+		 * shut down carefully to prevent crashes.
+		 */
+		u32 hcintmsk = HCINTMSK_CHHLTD;
+
+		dev_vdbg(hsotg->dev, "dequeue/error\n");
+		dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num));
+
+		/*
+		 * Make sure no other interrupts besides halt are currently
+		 * pending. Handling another interrupt could cause a crash due
+		 * to the QTD and QH state.
+		 */
+		dwc2_writel(hsotg, ~hcintmsk, HCINT(chan->hc_num));
+
+		/*
+		 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
+		 * even if the channel was already halted for some other
+		 * reason
+		 */
+		chan->halt_status = halt_status;
+
+		hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
+		if (!(hcchar & HCCHAR_CHENA)) {
+			/*
+			 * The channel is either already halted or it hasn't
+			 * started yet. In DMA mode, the transfer may halt if
+			 * it finishes normally or a condition occurs that
+			 * requires driver intervention. Don't want to halt
+			 * the channel again. In either Slave or DMA mode,
+			 * it's possible that the transfer has been assigned
+			 * to a channel, but not started yet when an URB is
+			 * dequeued. Don't want to halt a channel that hasn't
+			 * started yet.
+			 */
+			return;
+		}
+	}
+	if (chan->halt_pending) {
+		/*
+		 * A halt has already been issued for this channel. This might
+		 * happen when a transfer is aborted by a higher level in
+		 * the stack.
+		 */
+		dev_vdbg(hsotg->dev,
+			 "*** %s: Channel %d, chan->halt_pending already set ***\n",
+			 __func__, chan->hc_num);
+		return;
+	}
+
+	hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
+
+	/* No need to set the bit in DDMA for disabling the channel */
+	/* TODO check it everywhere channel is disabled */
+	if (!hsotg->params.dma_desc_enable) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "desc DMA disabled\n");
+		hcchar |= HCCHAR_CHENA;
+	} else {
+		if (dbg_hc(chan))
+			dev_dbg(hsotg->dev, "desc DMA enabled\n");
+	}
+	hcchar |= HCCHAR_CHDIS;
+
+	if (!hsotg->params.host_dma) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "DMA not enabled\n");
+		hcchar |= HCCHAR_CHENA;
+
+		/* Check for space in the request queue to issue the halt */
+		if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
+		    chan->ep_type == USB_ENDPOINT_XFER_BULK) {
+			dev_vdbg(hsotg->dev, "control/bulk\n");
+			nptxsts = dwc2_readl(hsotg, GNPTXSTS);
+			if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) {
+				dev_vdbg(hsotg->dev, "Disabling channel\n");
+				hcchar &= ~HCCHAR_CHENA;
+			}
+		} else {
+			if (dbg_perio())
+				dev_vdbg(hsotg->dev, "isoc/intr\n");
+			hptxsts = dwc2_readl(hsotg, HPTXSTS);
+			if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 ||
+			    hsotg->queuing_high_bandwidth) {
+				if (dbg_perio())
+					dev_vdbg(hsotg->dev, "Disabling channel\n");
+				hcchar &= ~HCCHAR_CHENA;
+			}
+		}
+	} else {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "DMA enabled\n");
+	}
+
+	dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
+	chan->halt_status = halt_status;
+
+	if (hcchar & HCCHAR_CHENA) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "Channel enabled\n");
+		chan->halt_pending = 1;
+		chan->halt_on_queue = 0;
+	} else {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "Channel disabled\n");
+		chan->halt_on_queue = 1;
+	}
+
+	if (dbg_hc(chan)) {
+		dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+			 chan->hc_num);
+		dev_vdbg(hsotg->dev, "	 hcchar: 0x%08x\n",
+			 hcchar);
+		dev_vdbg(hsotg->dev, "	 halt_pending: %d\n",
+			 chan->halt_pending);
+		dev_vdbg(hsotg->dev, "	 halt_on_queue: %d\n",
+			 chan->halt_on_queue);
+		dev_vdbg(hsotg->dev, "	 halt_status: %d\n",
+			 chan->halt_status);
+	}
+}
+
+/**
+ * dwc2_hc_cleanup() - Clears the transfer state for a host channel
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan:  Identifies the host channel to clean up
+ *
+ * This function is normally called after a transfer is done and the host
+ * channel is being released
+ */
+void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
+{
+	u32 hcintmsk;
+
+	chan->xfer_started = 0;
+
+	list_del_init(&chan->split_order_list_entry);
+
+	/*
+	 * Clear channel interrupt enables and any unhandled channel interrupt
+	 * conditions
+	 */
+	dwc2_writel(hsotg, 0, HCINTMSK(chan->hc_num));
+	hcintmsk = 0xffffffff;
+	hcintmsk &= ~HCINTMSK_RESERVED14_31;
+	dwc2_writel(hsotg, hcintmsk, HCINT(chan->hc_num));
+}
+
+/**
+ * dwc2_hc_set_even_odd_frame() - Sets the channel property that indicates in
+ * which frame a periodic transfer should occur
+ *
+ * @hsotg:  Programming view of DWC_otg controller
+ * @chan:   Identifies the host channel to set up and its properties
+ * @hcchar: Current value of the HCCHAR register for the specified host channel
+ *
+ * This function has no effect on non-periodic transfers
+ */
+static void dwc2_hc_set_even_odd_frame(struct dwc2_hsotg *hsotg,
+				       struct dwc2_host_chan *chan, u32 *hcchar)
+{
+	if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+	    chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+		int host_speed;
+		int xfer_ns;
+		int xfer_us;
+		int bytes_in_fifo;
+		u16 fifo_space;
+		u16 frame_number;
+		u16 wire_frame;
+
+		/*
+		 * Try to figure out if we're an even or odd frame. If we set
+		 * even and the current frame number is even the transfer
+		 * will happen immediately.  Similar if both are odd. If one is
+		 * even and the other is odd then the transfer will happen when
+		 * the frame number ticks.
+		 *
+		 * There's a bit of a balancing act to get this right.
+		 * Sometimes we may want to send data in the current frame (AK
+		 * right away).  We might want to do this if the frame number
+		 * _just_ ticked, but we might also want to do this in order
+		 * to continue a split transaction that happened late in a
+		 * microframe (so we didn't know to queue the next transfer
+		 * until the frame number had ticked).  The problem is that we
+		 * need a lot of knowledge to know if there's actually still
+		 * time to send things or if it would be better to wait until
+		 * the next frame.
+		 *
+		 * We can look at how much time is left in the current frame
+		 * and make a guess about whether we'll have time to transfer.
+		 * We'll do that.
+		 */
+
+		/* Get speed host is running at */
+		host_speed = (chan->speed != USB_SPEED_HIGH &&
+			      !chan->do_split) ? chan->speed : USB_SPEED_HIGH;
+
+		/* See how many bytes are in the periodic FIFO right now */
+		fifo_space = (dwc2_readl(hsotg, HPTXSTS) &
+			      TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT;
+		bytes_in_fifo = sizeof(u32) *
+				(hsotg->params.host_perio_tx_fifo_size -
+				 fifo_space);
+
+		/*
+		 * Roughly estimate bus time for everything in the periodic
+		 * queue + our new transfer.  This is "rough" because we're
+		 * using a function that makes takes into account IN/OUT
+		 * and INT/ISO and we're just slamming in one value for all
+		 * transfers.  This should be an over-estimate and that should
+		 * be OK, but we can probably tighten it.
+		 */
+		xfer_ns = usb_calc_bus_time(host_speed, false, false,
+					    chan->xfer_len + bytes_in_fifo);
+		xfer_us = NS_TO_US(xfer_ns);
+
+		/* See what frame number we'll be at by the time we finish */
+		frame_number = dwc2_hcd_get_future_frame_number(hsotg, xfer_us);
+
+		/* This is when we were scheduled to be on the wire */
+		wire_frame = dwc2_frame_num_inc(chan->qh->next_active_frame, 1);
+
+		/*
+		 * If we'd finish _after_ the frame we're scheduled in then
+		 * it's hopeless.  Just schedule right away and hope for the
+		 * best.  Note that it _might_ be wise to call back into the
+		 * scheduler to pick a better frame, but this is better than
+		 * nothing.
+		 */
+		if (dwc2_frame_num_gt(frame_number, wire_frame)) {
+			dwc2_sch_vdbg(hsotg,
+				      "QH=%p EO MISS fr=%04x=>%04x (%+d)\n",
+				      chan->qh, wire_frame, frame_number,
+				      dwc2_frame_num_dec(frame_number,
+							 wire_frame));
+			wire_frame = frame_number;
+
+			/*
+			 * We picked a different frame number; communicate this
+			 * back to the scheduler so it doesn't try to schedule
+			 * another in the same frame.
+			 *
+			 * Remember that next_active_frame is 1 before the wire
+			 * frame.
+			 */
+			chan->qh->next_active_frame =
+				dwc2_frame_num_dec(frame_number, 1);
+		}
+
+		if (wire_frame & 1)
+			*hcchar |= HCCHAR_ODDFRM;
+		else
+			*hcchar &= ~HCCHAR_ODDFRM;
+	}
+}
+
+static void dwc2_set_pid_isoc(struct dwc2_host_chan *chan)
+{
+	/* Set up the initial PID for the transfer */
+	if (chan->speed == USB_SPEED_HIGH) {
+		if (chan->ep_is_in) {
+			if (chan->multi_count == 1)
+				chan->data_pid_start = DWC2_HC_PID_DATA0;
+			else if (chan->multi_count == 2)
+				chan->data_pid_start = DWC2_HC_PID_DATA1;
+			else
+				chan->data_pid_start = DWC2_HC_PID_DATA2;
+		} else {
+			if (chan->multi_count == 1)
+				chan->data_pid_start = DWC2_HC_PID_DATA0;
+			else
+				chan->data_pid_start = DWC2_HC_PID_MDATA;
+		}
+	} else {
+		chan->data_pid_start = DWC2_HC_PID_DATA0;
+	}
+}
+
+/**
+ * dwc2_hc_write_packet() - Writes a packet into the Tx FIFO associated with
+ * the Host Channel
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan:  Information needed to initialize the host channel
+ *
+ * This function should only be called in Slave mode. For a channel associated
+ * with a non-periodic EP, the non-periodic Tx FIFO is written. For a channel
+ * associated with a periodic EP, the periodic Tx FIFO is written.
+ *
+ * Upon return the xfer_buf and xfer_count fields in chan are incremented by
+ * the number of bytes written to the Tx FIFO.
+ */
+static void dwc2_hc_write_packet(struct dwc2_hsotg *hsotg,
+				 struct dwc2_host_chan *chan)
+{
+	u32 i;
+	u32 remaining_count;
+	u32 byte_count;
+	u32 dword_count;
+	u32 *data_buf = (u32 *)chan->xfer_buf;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	remaining_count = chan->xfer_len - chan->xfer_count;
+	if (remaining_count > chan->max_packet)
+		byte_count = chan->max_packet;
+	else
+		byte_count = remaining_count;
+
+	dword_count = (byte_count + 3) / 4;
+
+	if (((unsigned long)data_buf & 0x3) == 0) {
+		/* xfer_buf is DWORD aligned */
+		for (i = 0; i < dword_count; i++, data_buf++)
+			dwc2_writel(hsotg, *data_buf, HCFIFO(chan->hc_num));
+	} else {
+		/* xfer_buf is not DWORD aligned */
+		for (i = 0; i < dword_count; i++, data_buf++) {
+			u32 data = data_buf[0] | data_buf[1] << 8 |
+				   data_buf[2] << 16 | data_buf[3] << 24;
+			dwc2_writel(hsotg, data, HCFIFO(chan->hc_num));
+		}
+	}
+
+	chan->xfer_count += byte_count;
+	chan->xfer_buf += byte_count;
+}
+
+/**
+ * dwc2_hc_do_ping() - Starts a PING transfer
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan:  Information needed to initialize the host channel
+ *
+ * This function should only be called in Slave mode. The Do Ping bit is set in
+ * the HCTSIZ register, then the channel is enabled.
+ */
+static void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg,
+			    struct dwc2_host_chan *chan)
+{
+	u32 hcchar;
+	u32 hctsiz;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+			 chan->hc_num);
+
+	hctsiz = TSIZ_DOPNG;
+	hctsiz |= 1 << TSIZ_PKTCNT_SHIFT;
+	dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num));
+
+	hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
+	hcchar |= HCCHAR_CHENA;
+	hcchar &= ~HCCHAR_CHDIS;
+	dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
+}
+
+/**
+ * dwc2_hc_start_transfer() - Does the setup for a data transfer for a host
+ * channel and starts the transfer
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan:  Information needed to initialize the host channel. The xfer_len value
+ *         may be reduced to accommodate the max widths of the XferSize and
+ *         PktCnt fields in the HCTSIZn register. The multi_count value may be
+ *         changed to reflect the final xfer_len value.
+ *
+ * This function may be called in either Slave mode or DMA mode. In Slave mode,
+ * the caller must ensure that there is sufficient space in the request queue
+ * and Tx Data FIFO.
+ *
+ * For an OUT transfer in Slave mode, it loads a data packet into the
+ * appropriate FIFO. If necessary, additional data packets are loaded in the
+ * Host ISR.
+ *
+ * For an IN transfer in Slave mode, a data packet is requested. The data
+ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
+ * additional data packets are requested in the Host ISR.
+ *
+ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
+ * register along with a packet count of 1 and the channel is enabled. This
+ * causes a single PING transaction to occur. Other fields in HCTSIZ are
+ * simply set to 0 since no data transfer occurs in this case.
+ *
+ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
+ * all the information required to perform the subsequent data transfer. In
+ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
+ * controller performs the entire PING protocol, then starts the data
+ * transfer.
+ */
+static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
+				   struct dwc2_host_chan *chan)
+{
+	u32 max_hc_xfer_size = hsotg->params.max_transfer_size;
+	u16 max_hc_pkt_count = hsotg->params.max_packet_count;
+	u32 hcchar;
+	u32 hctsiz = 0;
+	u16 num_packets;
+	u32 ec_mc;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	if (chan->do_ping) {
+		if (!hsotg->params.host_dma) {
+			if (dbg_hc(chan))
+				dev_vdbg(hsotg->dev, "ping, no DMA\n");
+			dwc2_hc_do_ping(hsotg, chan);
+			chan->xfer_started = 1;
+			return;
+		}
+
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "ping, DMA\n");
+
+		hctsiz |= TSIZ_DOPNG;
+	}
+
+	if (chan->do_split) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "split\n");
+		num_packets = 1;
+
+		if (chan->complete_split && !chan->ep_is_in)
+			/*
+			 * For CSPLIT OUT Transfer, set the size to 0 so the
+			 * core doesn't expect any data written to the FIFO
+			 */
+			chan->xfer_len = 0;
+		else if (chan->ep_is_in || chan->xfer_len > chan->max_packet)
+			chan->xfer_len = chan->max_packet;
+		else if (!chan->ep_is_in && chan->xfer_len > 188)
+			chan->xfer_len = 188;
+
+		hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
+			  TSIZ_XFERSIZE_MASK;
+
+		/* For split set ec_mc for immediate retries */
+		if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+		    chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+			ec_mc = 3;
+		else
+			ec_mc = 1;
+	} else {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "no split\n");
+		/*
+		 * Ensure that the transfer length and packet count will fit
+		 * in the widths allocated for them in the HCTSIZn register
+		 */
+		if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+		    chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+			/*
+			 * Make sure the transfer size is no larger than one
+			 * (micro)frame's worth of data. (A check was done
+			 * when the periodic transfer was accepted to ensure
+			 * that a (micro)frame's worth of data can be
+			 * programmed into a channel.)
+			 */
+			u32 max_periodic_len =
+				chan->multi_count * chan->max_packet;
+
+			if (chan->xfer_len > max_periodic_len)
+				chan->xfer_len = max_periodic_len;
+		} else if (chan->xfer_len > max_hc_xfer_size) {
+			/*
+			 * Make sure that xfer_len is a multiple of max packet
+			 * size
+			 */
+			chan->xfer_len =
+				max_hc_xfer_size - chan->max_packet + 1;
+		}
+
+		if (chan->xfer_len > 0) {
+			num_packets = (chan->xfer_len + chan->max_packet - 1) /
+					chan->max_packet;
+			if (num_packets > max_hc_pkt_count) {
+				num_packets = max_hc_pkt_count;
+				chan->xfer_len = num_packets * chan->max_packet;
+			} else if (chan->ep_is_in) {
+				/*
+				 * Always program an integral # of max packets
+				 * for IN transfers.
+				 * Note: This assumes that the input buffer is
+				 * aligned and sized accordingly.
+				 */
+				chan->xfer_len = num_packets * chan->max_packet;
+			}
+		} else {
+			/* Need 1 packet for transfer length of 0 */
+			num_packets = 1;
+		}
+
+		if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+		    chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+			/*
+			 * Make sure that the multi_count field matches the
+			 * actual transfer length
+			 */
+			chan->multi_count = num_packets;
+
+		if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+			dwc2_set_pid_isoc(chan);
+
+		hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
+			  TSIZ_XFERSIZE_MASK;
+
+		/* The ec_mc gets the multi_count for non-split */
+		ec_mc = chan->multi_count;
+	}
+
+	chan->start_pkt_count = num_packets;
+	hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK;
+	hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
+		  TSIZ_SC_MC_PID_MASK;
+	dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num));
+	if (dbg_hc(chan)) {
+		dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n",
+			 hctsiz, chan->hc_num);
+
+		dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+			 chan->hc_num);
+		dev_vdbg(hsotg->dev, "	 Xfer Size: %d\n",
+			 (hctsiz & TSIZ_XFERSIZE_MASK) >>
+			 TSIZ_XFERSIZE_SHIFT);
+		dev_vdbg(hsotg->dev, "	 Num Pkts: %d\n",
+			 (hctsiz & TSIZ_PKTCNT_MASK) >>
+			 TSIZ_PKTCNT_SHIFT);
+		dev_vdbg(hsotg->dev, "	 Start PID: %d\n",
+			 (hctsiz & TSIZ_SC_MC_PID_MASK) >>
+			 TSIZ_SC_MC_PID_SHIFT);
+	}
+
+	if (hsotg->params.host_dma) {
+		dma_addr_t dma_addr;
+
+		if (chan->align_buf) {
+			if (dbg_hc(chan))
+				dev_vdbg(hsotg->dev, "align_buf\n");
+			dma_addr = chan->align_buf;
+		} else {
+			dma_addr = chan->xfer_dma;
+		}
+		dwc2_writel(hsotg, (u32)dma_addr, HCDMA(chan->hc_num));
+
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n",
+				 (unsigned long)dma_addr, chan->hc_num);
+	}
+
+	/* Start the split */
+	if (chan->do_split) {
+		u32 hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num));
+
+		hcsplt |= HCSPLT_SPLTENA;
+		dwc2_writel(hsotg, hcsplt, HCSPLT(chan->hc_num));
+	}
+
+	hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
+	hcchar &= ~HCCHAR_MULTICNT_MASK;
+	hcchar |= (ec_mc << HCCHAR_MULTICNT_SHIFT) & HCCHAR_MULTICNT_MASK;
+	dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
+
+	if (hcchar & HCCHAR_CHDIS)
+		dev_warn(hsotg->dev,
+			 "%s: chdis set, channel %d, hcchar 0x%08x\n",
+			 __func__, chan->hc_num, hcchar);
+
+	/* Set host channel enable after all other setup is complete */
+	hcchar |= HCCHAR_CHENA;
+	hcchar &= ~HCCHAR_CHDIS;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "	 Multi Cnt: %d\n",
+			 (hcchar & HCCHAR_MULTICNT_MASK) >>
+			 HCCHAR_MULTICNT_SHIFT);
+
+	dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
+			 chan->hc_num);
+
+	chan->xfer_started = 1;
+	chan->requests++;
+
+	if (!hsotg->params.host_dma &&
+	    !chan->ep_is_in && chan->xfer_len > 0)
+		/* Load OUT packet into the appropriate Tx FIFO */
+		dwc2_hc_write_packet(hsotg, chan);
+}
+
+/**
+ * dwc2_hc_start_transfer_ddma() - Does the setup for a data transfer for a
+ * host channel and starts the transfer in Descriptor DMA mode
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan:  Information needed to initialize the host channel
+ *
+ * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set.
+ * Sets PID and NTD values. For periodic transfers initializes SCHED_INFO field
+ * with micro-frame bitmap.
+ *
+ * Initializes HCDMA register with descriptor list address and CTD value then
+ * starts the transfer via enabling the channel.
+ */
+void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
+				 struct dwc2_host_chan *chan)
+{
+	u32 hcchar;
+	u32 hctsiz = 0;
+
+	if (chan->do_ping)
+		hctsiz |= TSIZ_DOPNG;
+
+	if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+		dwc2_set_pid_isoc(chan);
+
+	/* Packet Count and Xfer Size are not used in Descriptor DMA mode */
+	hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
+		  TSIZ_SC_MC_PID_MASK;
+
+	/* 0 - 1 descriptor, 1 - 2 descriptors, etc */
+	hctsiz |= (chan->ntd - 1) << TSIZ_NTD_SHIFT & TSIZ_NTD_MASK;
+
+	/* Non-zero only for high-speed interrupt endpoints */
+	hctsiz |= chan->schinfo << TSIZ_SCHINFO_SHIFT & TSIZ_SCHINFO_MASK;
+
+	if (dbg_hc(chan)) {
+		dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+			 chan->hc_num);
+		dev_vdbg(hsotg->dev, "	 Start PID: %d\n",
+			 chan->data_pid_start);
+		dev_vdbg(hsotg->dev, "	 NTD: %d\n", chan->ntd - 1);
+	}
+
+	dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num));
+
+	dma_sync_single_for_device(hsotg->dev, chan->desc_list_addr,
+				   chan->desc_list_sz, DMA_TO_DEVICE);
+
+	dwc2_writel(hsotg, chan->desc_list_addr, HCDMA(chan->hc_num));
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "Wrote %pad to HCDMA(%d)\n",
+			 &chan->desc_list_addr, chan->hc_num);
+
+	hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
+	hcchar &= ~HCCHAR_MULTICNT_MASK;
+	hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT &
+		  HCCHAR_MULTICNT_MASK;
+
+	if (hcchar & HCCHAR_CHDIS)
+		dev_warn(hsotg->dev,
+			 "%s: chdis set, channel %d, hcchar 0x%08x\n",
+			 __func__, chan->hc_num, hcchar);
+
+	/* Set host channel enable after all other setup is complete */
+	hcchar |= HCCHAR_CHENA;
+	hcchar &= ~HCCHAR_CHDIS;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "	 Multi Cnt: %d\n",
+			 (hcchar & HCCHAR_MULTICNT_MASK) >>
+			 HCCHAR_MULTICNT_SHIFT);
+
+	dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
+			 chan->hc_num);
+
+	chan->xfer_started = 1;
+	chan->requests++;
+}
+
+/**
+ * dwc2_hc_continue_transfer() - Continues a data transfer that was started by
+ * a previous call to dwc2_hc_start_transfer()
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan:  Information needed to initialize the host channel
+ *
+ * The caller must ensure there is sufficient space in the request queue and Tx
+ * Data FIFO. This function should only be called in Slave mode. In DMA mode,
+ * the controller acts autonomously to complete transfers programmed to a host
+ * channel.
+ *
+ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
+ * if there is any data remaining to be queued. For an IN transfer, another
+ * data packet is always requested. For the SETUP phase of a control transfer,
+ * this function does nothing.
+ *
+ * Return: 1 if a new request is queued, 0 if no more requests are required
+ * for this transfer
+ */
+static int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg,
+				     struct dwc2_host_chan *chan)
+{
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+			 chan->hc_num);
+
+	if (chan->do_split)
+		/* SPLITs always queue just once per channel */
+		return 0;
+
+	if (chan->data_pid_start == DWC2_HC_PID_SETUP)
+		/* SETUPs are queued only once since they can't be NAK'd */
+		return 0;
+
+	if (chan->ep_is_in) {
+		/*
+		 * Always queue another request for other IN transfers. If
+		 * back-to-back INs are issued and NAKs are received for both,
+		 * the driver may still be processing the first NAK when the
+		 * second NAK is received. When the interrupt handler clears
+		 * the NAK interrupt for the first NAK, the second NAK will
+		 * not be seen. So we can't depend on the NAK interrupt
+		 * handler to requeue a NAK'd request. Instead, IN requests
+		 * are issued each time this function is called. When the
+		 * transfer completes, the extra requests for the channel will
+		 * be flushed.
+		 */
+		u32 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
+
+		dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
+		hcchar |= HCCHAR_CHENA;
+		hcchar &= ~HCCHAR_CHDIS;
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "	 IN xfer: hcchar = 0x%08x\n",
+				 hcchar);
+		dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
+		chan->requests++;
+		return 1;
+	}
+
+	/* OUT transfers */
+
+	if (chan->xfer_count < chan->xfer_len) {
+		if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+		    chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+			u32 hcchar = dwc2_readl(hsotg,
+						HCCHAR(chan->hc_num));
+
+			dwc2_hc_set_even_odd_frame(hsotg, chan,
+						   &hcchar);
+		}
+
+		/* Load OUT packet into the appropriate Tx FIFO */
+		dwc2_hc_write_packet(hsotg, chan);
+		chan->requests++;
+		return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * =========================================================================
+ *  HCD
+ * =========================================================================
+ */
+
+/*
+ * Processes all the URBs in a single list of QHs. Completes them with
+ * -ETIMEDOUT and frees the QTD.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static void dwc2_kill_urbs_in_qh_list(struct dwc2_hsotg *hsotg,
+				      struct list_head *qh_list)
+{
+	struct dwc2_qh *qh, *qh_tmp;
+	struct dwc2_qtd *qtd, *qtd_tmp;
+
+	list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) {
+		list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list,
+					 qtd_list_entry) {
+			dwc2_host_complete(hsotg, qtd, -ECONNRESET);
+			dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
+		}
+	}
+}
+
+static void dwc2_qh_list_free(struct dwc2_hsotg *hsotg,
+			      struct list_head *qh_list)
+{
+	struct dwc2_qtd *qtd, *qtd_tmp;
+	struct dwc2_qh *qh, *qh_tmp;
+	unsigned long flags;
+
+	if (!qh_list->next)
+		/* The list hasn't been initialized yet */
+		return;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	/* Ensure there are no QTDs or URBs left */
+	dwc2_kill_urbs_in_qh_list(hsotg, qh_list);
+
+	list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) {
+		dwc2_hcd_qh_unlink(hsotg, qh);
+
+		/* Free each QTD in the QH's QTD list */
+		list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list,
+					 qtd_list_entry)
+			dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
+
+		if (qh->channel && qh->channel->qh == qh)
+			qh->channel->qh = NULL;
+
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		dwc2_hcd_qh_free(hsotg, qh);
+		spin_lock_irqsave(&hsotg->lock, flags);
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+/*
+ * Responds with an error status of -ETIMEDOUT to all URBs in the non-periodic
+ * and periodic schedules. The QTD associated with each URB is removed from
+ * the schedule and freed. This function may be called when a disconnect is
+ * detected or when the HCD is being stopped.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static void dwc2_kill_all_urbs(struct dwc2_hsotg *hsotg)
+{
+	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_inactive);
+	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_waiting);
+	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_active);
+	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_inactive);
+	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_ready);
+	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_assigned);
+	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_queued);
+}
+
+/**
+ * dwc2_hcd_start() - Starts the HCD when switching to Host mode
+ *
+ * @hsotg: Pointer to struct dwc2_hsotg
+ */
+void dwc2_hcd_start(struct dwc2_hsotg *hsotg)
+{
+	u32 hprt0;
+
+	if (hsotg->op_state == OTG_STATE_B_HOST) {
+		/*
+		 * Reset the port. During a HNP mode switch the reset
+		 * needs to occur within 1ms and have a duration of at
+		 * least 50ms.
+		 */
+		hprt0 = dwc2_read_hprt0(hsotg);
+		hprt0 |= HPRT0_RST;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+	}
+
+	queue_delayed_work(hsotg->wq_otg, &hsotg->start_work,
+			   msecs_to_jiffies(50));
+}
+
+/* Must be called with interrupt disabled and spinlock held */
+static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg)
+{
+	int num_channels = hsotg->params.host_channels;
+	struct dwc2_host_chan *channel;
+	u32 hcchar;
+	int i;
+
+	if (!hsotg->params.host_dma) {
+		/* Flush out any channel requests in slave mode */
+		for (i = 0; i < num_channels; i++) {
+			channel = hsotg->hc_ptr_array[i];
+			if (!list_empty(&channel->hc_list_entry))
+				continue;
+			hcchar = dwc2_readl(hsotg, HCCHAR(i));
+			if (hcchar & HCCHAR_CHENA) {
+				hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR);
+				hcchar |= HCCHAR_CHDIS;
+				dwc2_writel(hsotg, hcchar, HCCHAR(i));
+			}
+		}
+	}
+
+	for (i = 0; i < num_channels; i++) {
+		channel = hsotg->hc_ptr_array[i];
+		if (!list_empty(&channel->hc_list_entry))
+			continue;
+		hcchar = dwc2_readl(hsotg, HCCHAR(i));
+		if (hcchar & HCCHAR_CHENA) {
+			/* Halt the channel */
+			hcchar |= HCCHAR_CHDIS;
+			dwc2_writel(hsotg, hcchar, HCCHAR(i));
+		}
+
+		dwc2_hc_cleanup(hsotg, channel);
+		list_add_tail(&channel->hc_list_entry, &hsotg->free_hc_list);
+		/*
+		 * Added for Descriptor DMA to prevent channel double cleanup in
+		 * release_channel_ddma(), which is called from ep_disable when
+		 * device disconnects
+		 */
+		channel->qh = NULL;
+	}
+	/* All channels have been freed, mark them available */
+	if (hsotg->params.uframe_sched) {
+		hsotg->available_host_channels =
+			hsotg->params.host_channels;
+	} else {
+		hsotg->non_periodic_channels = 0;
+		hsotg->periodic_channels = 0;
+	}
+}
+
+/**
+ * dwc2_hcd_connect() - Handles connect of the HCD
+ *
+ * @hsotg: Pointer to struct dwc2_hsotg
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+void dwc2_hcd_connect(struct dwc2_hsotg *hsotg)
+{
+	if (hsotg->lx_state != DWC2_L0)
+		usb_hcd_resume_root_hub(hsotg->priv);
+
+	hsotg->flags.b.port_connect_status_change = 1;
+	hsotg->flags.b.port_connect_status = 1;
+}
+
+/**
+ * dwc2_hcd_disconnect() - Handles disconnect of the HCD
+ *
+ * @hsotg: Pointer to struct dwc2_hsotg
+ * @force: If true, we won't try to reconnect even if we see device connected.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force)
+{
+	u32 intr;
+	u32 hprt0;
+
+	/* Set status flags for the hub driver */
+	hsotg->flags.b.port_connect_status_change = 1;
+	hsotg->flags.b.port_connect_status = 0;
+
+	/*
+	 * Shutdown any transfers in process by clearing the Tx FIFO Empty
+	 * interrupt mask and status bits and disabling subsequent host
+	 * channel interrupts.
+	 */
+	intr = dwc2_readl(hsotg, GINTMSK);
+	intr &= ~(GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT);
+	dwc2_writel(hsotg, intr, GINTMSK);
+	intr = GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT;
+	dwc2_writel(hsotg, intr, GINTSTS);
+
+	/*
+	 * Turn off the vbus power only if the core has transitioned to device
+	 * mode. If still in host mode, need to keep power on to detect a
+	 * reconnection.
+	 */
+	if (dwc2_is_device_mode(hsotg)) {
+		if (hsotg->op_state != OTG_STATE_A_SUSPEND) {
+			dev_dbg(hsotg->dev, "Disconnect: PortPower off\n");
+			dwc2_writel(hsotg, 0, HPRT0);
+		}
+
+		dwc2_disable_host_interrupts(hsotg);
+	}
+
+	/* Respond with an error status to all URBs in the schedule */
+	dwc2_kill_all_urbs(hsotg);
+
+	if (dwc2_is_host_mode(hsotg))
+		/* Clean up any host channels that were in use */
+		dwc2_hcd_cleanup_channels(hsotg);
+
+	dwc2_host_disconnect(hsotg);
+
+	/*
+	 * Add an extra check here to see if we're actually connected but
+	 * we don't have a detection interrupt pending.  This can happen if:
+	 *   1. hardware sees connect
+	 *   2. hardware sees disconnect
+	 *   3. hardware sees connect
+	 *   4. dwc2_port_intr() - clears connect interrupt
+	 *   5. dwc2_handle_common_intr() - calls here
+	 *
+	 * Without the extra check here we will end calling disconnect
+	 * and won't get any future interrupts to handle the connect.
+	 */
+	if (!force) {
+		hprt0 = dwc2_readl(hsotg, HPRT0);
+		if (!(hprt0 & HPRT0_CONNDET) && (hprt0 & HPRT0_CONNSTS))
+			dwc2_hcd_connect(hsotg);
+	}
+}
+
+/**
+ * dwc2_hcd_rem_wakeup() - Handles Remote Wakeup
+ *
+ * @hsotg: Pointer to struct dwc2_hsotg
+ */
+static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg)
+{
+	if (hsotg->bus_suspended) {
+		hsotg->flags.b.port_suspend_change = 1;
+		usb_hcd_resume_root_hub(hsotg->priv);
+	}
+
+	if (hsotg->lx_state == DWC2_L1)
+		hsotg->flags.b.port_l1_change = 1;
+}
+
+/**
+ * dwc2_hcd_stop() - Halts the DWC_otg host mode operations in a clean manner
+ *
+ * @hsotg: Pointer to struct dwc2_hsotg
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+void dwc2_hcd_stop(struct dwc2_hsotg *hsotg)
+{
+	dev_dbg(hsotg->dev, "DWC OTG HCD STOP\n");
+
+	/*
+	 * The root hub should be disconnected before this function is called.
+	 * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
+	 * and the QH lists (via ..._hcd_endpoint_disable).
+	 */
+
+	/* Turn off all host-specific interrupts */
+	dwc2_disable_host_interrupts(hsotg);
+
+	/* Turn off the vbus power */
+	dev_dbg(hsotg->dev, "PortPower off\n");
+	dwc2_writel(hsotg, 0, HPRT0);
+}
+
+/* Caller must hold driver lock */
+static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg,
+				struct dwc2_hcd_urb *urb, struct dwc2_qh *qh,
+				struct dwc2_qtd *qtd)
+{
+	u32 intr_mask;
+	int retval;
+	int dev_speed;
+
+	if (!hsotg->flags.b.port_connect_status) {
+		/* No longer connected */
+		dev_err(hsotg->dev, "Not connected\n");
+		return -ENODEV;
+	}
+
+	dev_speed = dwc2_host_get_speed(hsotg, urb->priv);
+
+	/* Some configurations cannot support LS traffic on a FS root port */
+	if ((dev_speed == USB_SPEED_LOW) &&
+	    (hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) &&
+	    (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI)) {
+		u32 hprt0 = dwc2_readl(hsotg, HPRT0);
+		u32 prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
+
+		if (prtspd == HPRT0_SPD_FULL_SPEED)
+			return -ENODEV;
+	}
+
+	if (!qtd)
+		return -EINVAL;
+
+	dwc2_hcd_qtd_init(qtd, urb);
+	retval = dwc2_hcd_qtd_add(hsotg, qtd, qh);
+	if (retval) {
+		dev_err(hsotg->dev,
+			"DWC OTG HCD URB Enqueue failed adding QTD. Error status %d\n",
+			retval);
+		return retval;
+	}
+
+	intr_mask = dwc2_readl(hsotg, GINTMSK);
+	if (!(intr_mask & GINTSTS_SOF)) {
+		enum dwc2_transaction_type tr_type;
+
+		if (qtd->qh->ep_type == USB_ENDPOINT_XFER_BULK &&
+		    !(qtd->urb->flags & URB_GIVEBACK_ASAP))
+			/*
+			 * Do not schedule SG transactions until qtd has
+			 * URB_GIVEBACK_ASAP set
+			 */
+			return 0;
+
+		tr_type = dwc2_hcd_select_transactions(hsotg);
+		if (tr_type != DWC2_TRANSACTION_NONE)
+			dwc2_hcd_queue_transactions(hsotg, tr_type);
+	}
+
+	return 0;
+}
+
+/* Must be called with interrupt disabled and spinlock held */
+static int dwc2_hcd_urb_dequeue(struct dwc2_hsotg *hsotg,
+				struct dwc2_hcd_urb *urb)
+{
+	struct dwc2_qh *qh;
+	struct dwc2_qtd *urb_qtd;
+
+	urb_qtd = urb->qtd;
+	if (!urb_qtd) {
+		dev_dbg(hsotg->dev, "## Urb QTD is NULL ##\n");
+		return -EINVAL;
+	}
+
+	qh = urb_qtd->qh;
+	if (!qh) {
+		dev_dbg(hsotg->dev, "## Urb QTD QH is NULL ##\n");
+		return -EINVAL;
+	}
+
+	urb->priv = NULL;
+
+	if (urb_qtd->in_process && qh->channel) {
+		dwc2_dump_channel_info(hsotg, qh->channel);
+
+		/* The QTD is in process (it has been assigned to a channel) */
+		if (hsotg->flags.b.port_connect_status)
+			/*
+			 * If still connected (i.e. in host mode), halt the
+			 * channel so it can be used for other transfers. If
+			 * no longer connected, the host registers can't be
+			 * written to halt the channel since the core is in
+			 * device mode.
+			 */
+			dwc2_hc_halt(hsotg, qh->channel,
+				     DWC2_HC_XFER_URB_DEQUEUE);
+	}
+
+	/*
+	 * Free the QTD and clean up the associated QH. Leave the QH in the
+	 * schedule if it has any remaining QTDs.
+	 */
+	if (!hsotg->params.dma_desc_enable) {
+		u8 in_process = urb_qtd->in_process;
+
+		dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh);
+		if (in_process) {
+			dwc2_hcd_qh_deactivate(hsotg, qh, 0);
+			qh->channel = NULL;
+		} else if (list_empty(&qh->qtd_list)) {
+			dwc2_hcd_qh_unlink(hsotg, qh);
+		}
+	} else {
+		dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh);
+	}
+
+	return 0;
+}
+
+/* Must NOT be called with interrupt disabled or spinlock held */
+static int dwc2_hcd_endpoint_disable(struct dwc2_hsotg *hsotg,
+				     struct usb_host_endpoint *ep, int retry)
+{
+	struct dwc2_qtd *qtd, *qtd_tmp;
+	struct dwc2_qh *qh;
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	qh = ep->hcpriv;
+	if (!qh) {
+		rc = -EINVAL;
+		goto err;
+	}
+
+	while (!list_empty(&qh->qtd_list) && retry--) {
+		if (retry == 0) {
+			dev_err(hsotg->dev,
+				"## timeout in dwc2_hcd_endpoint_disable() ##\n");
+			rc = -EBUSY;
+			goto err;
+		}
+
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		msleep(20);
+		spin_lock_irqsave(&hsotg->lock, flags);
+		qh = ep->hcpriv;
+		if (!qh) {
+			rc = -EINVAL;
+			goto err;
+		}
+	}
+
+	dwc2_hcd_qh_unlink(hsotg, qh);
+
+	/* Free each QTD in the QH's QTD list */
+	list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry)
+		dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
+
+	ep->hcpriv = NULL;
+
+	if (qh->channel && qh->channel->qh == qh)
+		qh->channel->qh = NULL;
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	dwc2_hcd_qh_free(hsotg, qh);
+
+	return 0;
+
+err:
+	ep->hcpriv = NULL;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return rc;
+}
+
+/* Must be called with interrupt disabled and spinlock held */
+static int dwc2_hcd_endpoint_reset(struct dwc2_hsotg *hsotg,
+				   struct usb_host_endpoint *ep)
+{
+	struct dwc2_qh *qh = ep->hcpriv;
+
+	if (!qh)
+		return -EINVAL;
+
+	qh->data_toggle = DWC2_HC_PID_DATA0;
+
+	return 0;
+}
+
+/**
+ * dwc2_core_init() - Initializes the DWC_otg controller registers and
+ * prepares the core for device mode or host mode operation
+ *
+ * @hsotg:         Programming view of the DWC_otg controller
+ * @initial_setup: If true then this is the first init for this instance.
+ */
+int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup)
+{
+	u32 usbcfg, otgctl;
+	int retval;
+
+	dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
+
+	usbcfg = dwc2_readl(hsotg, GUSBCFG);
+
+	/* Set ULPI External VBUS bit if needed */
+	usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV;
+	if (hsotg->params.phy_ulpi_ext_vbus)
+		usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV;
+
+	/* Set external TS Dline pulsing bit if needed */
+	usbcfg &= ~GUSBCFG_TERMSELDLPULSE;
+	if (hsotg->params.ts_dline)
+		usbcfg |= GUSBCFG_TERMSELDLPULSE;
+
+	dwc2_writel(hsotg, usbcfg, GUSBCFG);
+
+	/*
+	 * Reset the Controller
+	 *
+	 * We only need to reset the controller if this is a re-init.
+	 * For the first init we know for sure that earlier code reset us (it
+	 * needed to in order to properly detect various parameters).
+	 */
+	if (!initial_setup) {
+		retval = dwc2_core_reset(hsotg, false);
+		if (retval) {
+			dev_err(hsotg->dev, "%s(): Reset failed, aborting\n",
+				__func__);
+			return retval;
+		}
+	}
+
+	/*
+	 * This needs to happen in FS mode before any other programming occurs
+	 */
+	retval = dwc2_phy_init(hsotg, initial_setup);
+	if (retval)
+		return retval;
+
+	/* Program the GAHBCFG Register */
+	retval = dwc2_gahbcfg_init(hsotg);
+	if (retval)
+		return retval;
+
+	/* Program the GUSBCFG register */
+	dwc2_gusbcfg_init(hsotg);
+
+	/* Program the GOTGCTL register */
+	otgctl = dwc2_readl(hsotg, GOTGCTL);
+	otgctl &= ~GOTGCTL_OTGVER;
+	dwc2_writel(hsotg, otgctl, GOTGCTL);
+
+	/* Clear the SRP success bit for FS-I2c */
+	hsotg->srp_success = 0;
+
+	/* Enable common interrupts */
+	dwc2_enable_common_interrupts(hsotg);
+
+	/*
+	 * Do device or host initialization based on mode during PCD and
+	 * HCD initialization
+	 */
+	if (dwc2_is_host_mode(hsotg)) {
+		dev_dbg(hsotg->dev, "Host Mode\n");
+		hsotg->op_state = OTG_STATE_A_HOST;
+	} else {
+		dev_dbg(hsotg->dev, "Device Mode\n");
+		hsotg->op_state = OTG_STATE_B_PERIPHERAL;
+	}
+
+	return 0;
+}
+
+/**
+ * dwc2_core_host_init() - Initializes the DWC_otg controller registers for
+ * Host mode
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * This function flushes the Tx and Rx FIFOs and flushes any entries in the
+ * request queues. Host channels are reset to ensure that they are ready for
+ * performing transfers.
+ */
+static void dwc2_core_host_init(struct dwc2_hsotg *hsotg)
+{
+	u32 hcfg, hfir, otgctl, usbcfg;
+
+	dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
+
+	/* Set HS/FS Timeout Calibration to 7 (max available value).
+	 * The number of PHY clocks that the application programs in
+	 * this field is added to the high/full speed interpacket timeout
+	 * duration in the core to account for any additional delays
+	 * introduced by the PHY. This can be required, because the delay
+	 * introduced by the PHY in generating the linestate condition
+	 * can vary from one PHY to another.
+	 */
+	usbcfg = dwc2_readl(hsotg, GUSBCFG);
+	usbcfg |= GUSBCFG_TOUTCAL(7);
+	dwc2_writel(hsotg, usbcfg, GUSBCFG);
+
+	/* Restart the Phy Clock */
+	dwc2_writel(hsotg, 0, PCGCTL);
+
+	/* Initialize Host Configuration Register */
+	dwc2_init_fs_ls_pclk_sel(hsotg);
+	if (hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
+	    hsotg->params.speed == DWC2_SPEED_PARAM_LOW) {
+		hcfg = dwc2_readl(hsotg, HCFG);
+		hcfg |= HCFG_FSLSSUPP;
+		dwc2_writel(hsotg, hcfg, HCFG);
+	}
+
+	/*
+	 * This bit allows dynamic reloading of the HFIR register during
+	 * runtime. This bit needs to be programmed during initial configuration
+	 * and its value must not be changed during runtime.
+	 */
+	if (hsotg->params.reload_ctl) {
+		hfir = dwc2_readl(hsotg, HFIR);
+		hfir |= HFIR_RLDCTRL;
+		dwc2_writel(hsotg, hfir, HFIR);
+	}
+
+	if (hsotg->params.dma_desc_enable) {
+		u32 op_mode = hsotg->hw_params.op_mode;
+
+		if (hsotg->hw_params.snpsid < DWC2_CORE_REV_2_90a ||
+		    !hsotg->hw_params.dma_desc_enable ||
+		    op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE ||
+		    op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE ||
+		    op_mode == GHWCFG2_OP_MODE_UNDEFINED) {
+			dev_err(hsotg->dev,
+				"Hardware does not support descriptor DMA mode -\n");
+			dev_err(hsotg->dev,
+				"falling back to buffer DMA mode.\n");
+			hsotg->params.dma_desc_enable = false;
+		} else {
+			hcfg = dwc2_readl(hsotg, HCFG);
+			hcfg |= HCFG_DESCDMA;
+			dwc2_writel(hsotg, hcfg, HCFG);
+		}
+	}
+
+	/* Configure data FIFO sizes */
+	dwc2_config_fifos(hsotg);
+
+	/* TODO - check this */
+	/* Clear Host Set HNP Enable in the OTG Control Register */
+	otgctl = dwc2_readl(hsotg, GOTGCTL);
+	otgctl &= ~GOTGCTL_HSTSETHNPEN;
+	dwc2_writel(hsotg, otgctl, GOTGCTL);
+
+	/* Make sure the FIFOs are flushed */
+	dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */);
+	dwc2_flush_rx_fifo(hsotg);
+
+	/* Clear Host Set HNP Enable in the OTG Control Register */
+	otgctl = dwc2_readl(hsotg, GOTGCTL);
+	otgctl &= ~GOTGCTL_HSTSETHNPEN;
+	dwc2_writel(hsotg, otgctl, GOTGCTL);
+
+	if (!hsotg->params.dma_desc_enable) {
+		int num_channels, i;
+		u32 hcchar;
+
+		/* Flush out any leftover queued requests */
+		num_channels = hsotg->params.host_channels;
+		for (i = 0; i < num_channels; i++) {
+			hcchar = dwc2_readl(hsotg, HCCHAR(i));
+			if (hcchar & HCCHAR_CHENA) {
+				hcchar &= ~HCCHAR_CHENA;
+				hcchar |= HCCHAR_CHDIS;
+				hcchar &= ~HCCHAR_EPDIR;
+				dwc2_writel(hsotg, hcchar, HCCHAR(i));
+			}
+		}
+
+		/* Halt all channels to put them into a known state */
+		for (i = 0; i < num_channels; i++) {
+			hcchar = dwc2_readl(hsotg, HCCHAR(i));
+			if (hcchar & HCCHAR_CHENA) {
+				hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS;
+				hcchar &= ~HCCHAR_EPDIR;
+				dwc2_writel(hsotg, hcchar, HCCHAR(i));
+				dev_dbg(hsotg->dev, "%s: Halt channel %d\n",
+					__func__, i);
+
+				if (dwc2_hsotg_wait_bit_clear(hsotg, HCCHAR(i),
+							      HCCHAR_CHENA,
+							      1000)) {
+					dev_warn(hsotg->dev,
+						 "Unable to clear enable on channel %d\n",
+						 i);
+				}
+			}
+		}
+	}
+
+	/* Enable ACG feature in host mode, if supported */
+	dwc2_enable_acg(hsotg);
+
+	/* Turn on the vbus power */
+	dev_dbg(hsotg->dev, "Init: Port Power? op_state=%d\n", hsotg->op_state);
+	if (hsotg->op_state == OTG_STATE_A_HOST) {
+		u32 hprt0 = dwc2_read_hprt0(hsotg);
+
+		dev_dbg(hsotg->dev, "Init: Power Port (%d)\n",
+			!!(hprt0 & HPRT0_PWR));
+		if (!(hprt0 & HPRT0_PWR)) {
+			hprt0 |= HPRT0_PWR;
+			dwc2_writel(hsotg, hprt0, HPRT0);
+		}
+	}
+
+	dwc2_enable_host_interrupts(hsotg);
+}
+
+/*
+ * Initializes dynamic portions of the DWC_otg HCD state
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static void dwc2_hcd_reinit(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_host_chan *chan, *chan_tmp;
+	int num_channels;
+	int i;
+
+	hsotg->flags.d32 = 0;
+	hsotg->non_periodic_qh_ptr = &hsotg->non_periodic_sched_active;
+
+	if (hsotg->params.uframe_sched) {
+		hsotg->available_host_channels =
+			hsotg->params.host_channels;
+	} else {
+		hsotg->non_periodic_channels = 0;
+		hsotg->periodic_channels = 0;
+	}
+
+	/*
+	 * Put all channels in the free channel list and clean up channel
+	 * states
+	 */
+	list_for_each_entry_safe(chan, chan_tmp, &hsotg->free_hc_list,
+				 hc_list_entry)
+		list_del_init(&chan->hc_list_entry);
+
+	num_channels = hsotg->params.host_channels;
+	for (i = 0; i < num_channels; i++) {
+		chan = hsotg->hc_ptr_array[i];
+		list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list);
+		dwc2_hc_cleanup(hsotg, chan);
+	}
+
+	/* Initialize the DWC core for host mode operation */
+	dwc2_core_host_init(hsotg);
+}
+
+static void dwc2_hc_init_split(struct dwc2_hsotg *hsotg,
+			       struct dwc2_host_chan *chan,
+			       struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb)
+{
+	int hub_addr, hub_port;
+
+	chan->do_split = 1;
+	chan->xact_pos = qtd->isoc_split_pos;
+	chan->complete_split = qtd->complete_split;
+	dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port);
+	chan->hub_addr = (u8)hub_addr;
+	chan->hub_port = (u8)hub_port;
+}
+
+static void dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg,
+			      struct dwc2_host_chan *chan,
+			      struct dwc2_qtd *qtd)
+{
+	struct dwc2_hcd_urb *urb = qtd->urb;
+	struct dwc2_hcd_iso_packet_desc *frame_desc;
+
+	switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		chan->ep_type = USB_ENDPOINT_XFER_CONTROL;
+
+		switch (qtd->control_phase) {
+		case DWC2_CONTROL_SETUP:
+			dev_vdbg(hsotg->dev, "  Control setup transaction\n");
+			chan->do_ping = 0;
+			chan->ep_is_in = 0;
+			chan->data_pid_start = DWC2_HC_PID_SETUP;
+			if (hsotg->params.host_dma)
+				chan->xfer_dma = urb->setup_dma;
+			else
+				chan->xfer_buf = urb->setup_packet;
+			chan->xfer_len = 8;
+			break;
+
+		case DWC2_CONTROL_DATA:
+			dev_vdbg(hsotg->dev, "  Control data transaction\n");
+			chan->data_pid_start = qtd->data_toggle;
+			break;
+
+		case DWC2_CONTROL_STATUS:
+			/*
+			 * Direction is opposite of data direction or IN if no
+			 * data
+			 */
+			dev_vdbg(hsotg->dev, "  Control status transaction\n");
+			if (urb->length == 0)
+				chan->ep_is_in = 1;
+			else
+				chan->ep_is_in =
+					dwc2_hcd_is_pipe_out(&urb->pipe_info);
+			if (chan->ep_is_in)
+				chan->do_ping = 0;
+			chan->data_pid_start = DWC2_HC_PID_DATA1;
+			chan->xfer_len = 0;
+			if (hsotg->params.host_dma)
+				chan->xfer_dma = hsotg->status_buf_dma;
+			else
+				chan->xfer_buf = hsotg->status_buf;
+			break;
+		}
+		break;
+
+	case USB_ENDPOINT_XFER_BULK:
+		chan->ep_type = USB_ENDPOINT_XFER_BULK;
+		break;
+
+	case USB_ENDPOINT_XFER_INT:
+		chan->ep_type = USB_ENDPOINT_XFER_INT;
+		break;
+
+	case USB_ENDPOINT_XFER_ISOC:
+		chan->ep_type = USB_ENDPOINT_XFER_ISOC;
+		if (hsotg->params.dma_desc_enable)
+			break;
+
+		frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
+		frame_desc->status = 0;
+
+		if (hsotg->params.host_dma) {
+			chan->xfer_dma = urb->dma;
+			chan->xfer_dma += frame_desc->offset +
+					qtd->isoc_split_offset;
+		} else {
+			chan->xfer_buf = urb->buf;
+			chan->xfer_buf += frame_desc->offset +
+					qtd->isoc_split_offset;
+		}
+
+		chan->xfer_len = frame_desc->length - qtd->isoc_split_offset;
+
+		if (chan->xact_pos == DWC2_HCSPLT_XACTPOS_ALL) {
+			if (chan->xfer_len <= 188)
+				chan->xact_pos = DWC2_HCSPLT_XACTPOS_ALL;
+			else
+				chan->xact_pos = DWC2_HCSPLT_XACTPOS_BEGIN;
+		}
+		break;
+	}
+}
+
+static int dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg *hsotg,
+					    struct dwc2_qh *qh,
+					    struct dwc2_host_chan *chan)
+{
+	if (!hsotg->unaligned_cache ||
+	    chan->max_packet > DWC2_KMEM_UNALIGNED_BUF_SIZE)
+		return -ENOMEM;
+
+	if (!qh->dw_align_buf) {
+		qh->dw_align_buf = kmem_cache_alloc(hsotg->unaligned_cache,
+						    GFP_ATOMIC | GFP_DMA);
+		if (!qh->dw_align_buf)
+			return -ENOMEM;
+	}
+
+	qh->dw_align_buf_dma = dma_map_single(hsotg->dev, qh->dw_align_buf,
+					      DWC2_KMEM_UNALIGNED_BUF_SIZE,
+					      DMA_FROM_DEVICE);
+
+	if (dma_mapping_error(hsotg->dev, qh->dw_align_buf_dma)) {
+		dev_err(hsotg->dev, "can't map align_buf\n");
+		chan->align_buf = 0;
+		return -EINVAL;
+	}
+
+	chan->align_buf = qh->dw_align_buf_dma;
+	return 0;
+}
+
+#define DWC2_USB_DMA_ALIGN 4
+
+static void dwc2_free_dma_aligned_buffer(struct urb *urb)
+{
+	void *stored_xfer_buffer;
+	size_t length;
+
+	if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
+		return;
+
+	/* Restore urb->transfer_buffer from the end of the allocated area */
+	memcpy(&stored_xfer_buffer,
+	       PTR_ALIGN(urb->transfer_buffer + urb->transfer_buffer_length,
+			 dma_get_cache_alignment()),
+	       sizeof(urb->transfer_buffer));
+
+	if (usb_urb_dir_in(urb)) {
+		if (usb_pipeisoc(urb->pipe))
+			length = urb->transfer_buffer_length;
+		else
+			length = urb->actual_length;
+
+		memcpy(stored_xfer_buffer, urb->transfer_buffer, length);
+	}
+	kfree(urb->transfer_buffer);
+	urb->transfer_buffer = stored_xfer_buffer;
+
+	urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
+}
+
+static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
+{
+	void *kmalloc_ptr;
+	size_t kmalloc_size;
+
+	if (urb->num_sgs || urb->sg ||
+	    urb->transfer_buffer_length == 0 ||
+	    !((uintptr_t)urb->transfer_buffer & (DWC2_USB_DMA_ALIGN - 1)))
+		return 0;
+
+	/*
+	 * Allocate a buffer with enough padding for original transfer_buffer
+	 * pointer. This allocation is guaranteed to be aligned properly for
+	 * DMA
+	 */
+	kmalloc_size = urb->transfer_buffer_length +
+		(dma_get_cache_alignment() - 1) +
+		sizeof(urb->transfer_buffer);
+
+	kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
+	if (!kmalloc_ptr)
+		return -ENOMEM;
+
+	/*
+	 * Position value of original urb->transfer_buffer pointer to the end
+	 * of allocation for later referencing
+	 */
+	memcpy(PTR_ALIGN(kmalloc_ptr + urb->transfer_buffer_length,
+			 dma_get_cache_alignment()),
+	       &urb->transfer_buffer, sizeof(urb->transfer_buffer));
+
+	if (usb_urb_dir_out(urb))
+		memcpy(kmalloc_ptr, urb->transfer_buffer,
+		       urb->transfer_buffer_length);
+	urb->transfer_buffer = kmalloc_ptr;
+
+	urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;
+
+	return 0;
+}
+
+static int dwc2_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+				gfp_t mem_flags)
+{
+	int ret;
+
+	/* We assume setup_dma is always aligned; warn if not */
+	WARN_ON_ONCE(urb->setup_dma &&
+		     (urb->setup_dma & (DWC2_USB_DMA_ALIGN - 1)));
+
+	ret = dwc2_alloc_dma_aligned_buffer(urb, mem_flags);
+	if (ret)
+		return ret;
+
+	ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+	if (ret)
+		dwc2_free_dma_aligned_buffer(urb);
+
+	return ret;
+}
+
+static void dwc2_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	usb_hcd_unmap_urb_for_dma(hcd, urb);
+	dwc2_free_dma_aligned_buffer(urb);
+}
+
+/**
+ * dwc2_assign_and_init_hc() - Assigns transactions from a QTD to a free host
+ * channel and initializes the host channel to perform the transactions. The
+ * host channel is removed from the free list.
+ *
+ * @hsotg: The HCD state structure
+ * @qh:    Transactions from the first QTD for this QH are selected and assigned
+ *         to a free host channel
+ */
+static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	struct dwc2_host_chan *chan;
+	struct dwc2_hcd_urb *urb;
+	struct dwc2_qtd *qtd;
+
+	if (dbg_qh(qh))
+		dev_vdbg(hsotg->dev, "%s(%p,%p)\n", __func__, hsotg, qh);
+
+	if (list_empty(&qh->qtd_list)) {
+		dev_dbg(hsotg->dev, "No QTDs in QH list\n");
+		return -ENOMEM;
+	}
+
+	if (list_empty(&hsotg->free_hc_list)) {
+		dev_dbg(hsotg->dev, "No free channel to assign\n");
+		return -ENOMEM;
+	}
+
+	chan = list_first_entry(&hsotg->free_hc_list, struct dwc2_host_chan,
+				hc_list_entry);
+
+	/* Remove host channel from free list */
+	list_del_init(&chan->hc_list_entry);
+
+	qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry);
+	urb = qtd->urb;
+	qh->channel = chan;
+	qtd->in_process = 1;
+
+	/*
+	 * Use usb_pipedevice to determine device address. This address is
+	 * 0 before the SET_ADDRESS command and the correct address afterward.
+	 */
+	chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info);
+	chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info);
+	chan->speed = qh->dev_speed;
+	chan->max_packet = qh->maxp;
+
+	chan->xfer_started = 0;
+	chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS;
+	chan->error_state = (qtd->error_count > 0);
+	chan->halt_on_queue = 0;
+	chan->halt_pending = 0;
+	chan->requests = 0;
+
+	/*
+	 * The following values may be modified in the transfer type section
+	 * below. The xfer_len value may be reduced when the transfer is
+	 * started to accommodate the max widths of the XferSize and PktCnt
+	 * fields in the HCTSIZn register.
+	 */
+
+	chan->ep_is_in = (dwc2_hcd_is_pipe_in(&urb->pipe_info) != 0);
+	if (chan->ep_is_in)
+		chan->do_ping = 0;
+	else
+		chan->do_ping = qh->ping_state;
+
+	chan->data_pid_start = qh->data_toggle;
+	chan->multi_count = 1;
+
+	if (urb->actual_length > urb->length &&
+	    !dwc2_hcd_is_pipe_in(&urb->pipe_info))
+		urb->actual_length = urb->length;
+
+	if (hsotg->params.host_dma)
+		chan->xfer_dma = urb->dma + urb->actual_length;
+	else
+		chan->xfer_buf = (u8 *)urb->buf + urb->actual_length;
+
+	chan->xfer_len = urb->length - urb->actual_length;
+	chan->xfer_count = 0;
+
+	/* Set the split attributes if required */
+	if (qh->do_split)
+		dwc2_hc_init_split(hsotg, chan, qtd, urb);
+	else
+		chan->do_split = 0;
+
+	/* Set the transfer attributes */
+	dwc2_hc_init_xfer(hsotg, chan, qtd);
+
+	/* For non-dword aligned buffers */
+	if (hsotg->params.host_dma && qh->do_split &&
+	    chan->ep_is_in && (chan->xfer_dma & 0x3)) {
+		dev_vdbg(hsotg->dev, "Non-aligned buffer\n");
+		if (dwc2_alloc_split_dma_aligned_buf(hsotg, qh, chan)) {
+			dev_err(hsotg->dev,
+				"Failed to allocate memory to handle non-aligned buffer\n");
+			/* Add channel back to free list */
+			chan->align_buf = 0;
+			chan->multi_count = 0;
+			list_add_tail(&chan->hc_list_entry,
+				      &hsotg->free_hc_list);
+			qtd->in_process = 0;
+			qh->channel = NULL;
+			return -ENOMEM;
+		}
+	} else {
+		/*
+		 * We assume that DMA is always aligned in non-split
+		 * case or split out case. Warn if not.
+		 */
+		WARN_ON_ONCE(hsotg->params.host_dma &&
+			     (chan->xfer_dma & 0x3));
+		chan->align_buf = 0;
+	}
+
+	if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+	    chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+		/*
+		 * This value may be modified when the transfer is started
+		 * to reflect the actual transfer length
+		 */
+		chan->multi_count = qh->maxp_mult;
+
+	if (hsotg->params.dma_desc_enable) {
+		chan->desc_list_addr = qh->desc_list_dma;
+		chan->desc_list_sz = qh->desc_list_sz;
+	}
+
+	dwc2_hc_init(hsotg, chan);
+	chan->qh = qh;
+
+	return 0;
+}
+
+/**
+ * dwc2_hcd_select_transactions() - Selects transactions from the HCD transfer
+ * schedule and assigns them to available host channels. Called from the HCD
+ * interrupt handler functions.
+ *
+ * @hsotg: The HCD state structure
+ *
+ * Return: The types of new transactions that were assigned to host channels
+ */
+enum dwc2_transaction_type dwc2_hcd_select_transactions(
+		struct dwc2_hsotg *hsotg)
+{
+	enum dwc2_transaction_type ret_val = DWC2_TRANSACTION_NONE;
+	struct list_head *qh_ptr;
+	struct dwc2_qh *qh;
+	int num_channels;
+
+#ifdef DWC2_DEBUG_SOF
+	dev_vdbg(hsotg->dev, "  Select Transactions\n");
+#endif
+
+	/* Process entries in the periodic ready list */
+	qh_ptr = hsotg->periodic_sched_ready.next;
+	while (qh_ptr != &hsotg->periodic_sched_ready) {
+		if (list_empty(&hsotg->free_hc_list))
+			break;
+		if (hsotg->params.uframe_sched) {
+			if (hsotg->available_host_channels <= 1)
+				break;
+			hsotg->available_host_channels--;
+		}
+		qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
+		if (dwc2_assign_and_init_hc(hsotg, qh))
+			break;
+
+		/*
+		 * Move the QH from the periodic ready schedule to the
+		 * periodic assigned schedule
+		 */
+		qh_ptr = qh_ptr->next;
+		list_move_tail(&qh->qh_list_entry,
+			       &hsotg->periodic_sched_assigned);
+		ret_val = DWC2_TRANSACTION_PERIODIC;
+	}
+
+	/*
+	 * Process entries in the inactive portion of the non-periodic
+	 * schedule. Some free host channels may not be used if they are
+	 * reserved for periodic transfers.
+	 */
+	num_channels = hsotg->params.host_channels;
+	qh_ptr = hsotg->non_periodic_sched_inactive.next;
+	while (qh_ptr != &hsotg->non_periodic_sched_inactive) {
+		if (!hsotg->params.uframe_sched &&
+		    hsotg->non_periodic_channels >= num_channels -
+						hsotg->periodic_channels)
+			break;
+		if (list_empty(&hsotg->free_hc_list))
+			break;
+		qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
+		if (hsotg->params.uframe_sched) {
+			if (hsotg->available_host_channels < 1)
+				break;
+			hsotg->available_host_channels--;
+		}
+
+		if (dwc2_assign_and_init_hc(hsotg, qh))
+			break;
+
+		/*
+		 * Move the QH from the non-periodic inactive schedule to the
+		 * non-periodic active schedule
+		 */
+		qh_ptr = qh_ptr->next;
+		list_move_tail(&qh->qh_list_entry,
+			       &hsotg->non_periodic_sched_active);
+
+		if (ret_val == DWC2_TRANSACTION_NONE)
+			ret_val = DWC2_TRANSACTION_NON_PERIODIC;
+		else
+			ret_val = DWC2_TRANSACTION_ALL;
+
+		if (!hsotg->params.uframe_sched)
+			hsotg->non_periodic_channels++;
+	}
+
+	return ret_val;
+}
+
+/**
+ * dwc2_queue_transaction() - Attempts to queue a single transaction request for
+ * a host channel associated with either a periodic or non-periodic transfer
+ *
+ * @hsotg: The HCD state structure
+ * @chan:  Host channel descriptor associated with either a periodic or
+ *         non-periodic transfer
+ * @fifo_dwords_avail: Number of DWORDs available in the periodic Tx FIFO
+ *                     for periodic transfers or the non-periodic Tx FIFO
+ *                     for non-periodic transfers
+ *
+ * Return: 1 if a request is queued and more requests may be needed to
+ * complete the transfer, 0 if no more requests are required for this
+ * transfer, -1 if there is insufficient space in the Tx FIFO
+ *
+ * This function assumes that there is space available in the appropriate
+ * request queue. For an OUT transfer or SETUP transaction in Slave mode,
+ * it checks whether space is available in the appropriate Tx FIFO.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static int dwc2_queue_transaction(struct dwc2_hsotg *hsotg,
+				  struct dwc2_host_chan *chan,
+				  u16 fifo_dwords_avail)
+{
+	int retval = 0;
+
+	if (chan->do_split)
+		/* Put ourselves on the list to keep order straight */
+		list_move_tail(&chan->split_order_list_entry,
+			       &hsotg->split_order);
+
+	if (hsotg->params.host_dma && chan->qh) {
+		if (hsotg->params.dma_desc_enable) {
+			if (!chan->xfer_started ||
+			    chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+				dwc2_hcd_start_xfer_ddma(hsotg, chan->qh);
+				chan->qh->ping_state = 0;
+			}
+		} else if (!chan->xfer_started) {
+			dwc2_hc_start_transfer(hsotg, chan);
+			chan->qh->ping_state = 0;
+		}
+	} else if (chan->halt_pending) {
+		/* Don't queue a request if the channel has been halted */
+	} else if (chan->halt_on_queue) {
+		dwc2_hc_halt(hsotg, chan, chan->halt_status);
+	} else if (chan->do_ping) {
+		if (!chan->xfer_started)
+			dwc2_hc_start_transfer(hsotg, chan);
+	} else if (!chan->ep_is_in ||
+		   chan->data_pid_start == DWC2_HC_PID_SETUP) {
+		if ((fifo_dwords_avail * 4) >= chan->max_packet) {
+			if (!chan->xfer_started) {
+				dwc2_hc_start_transfer(hsotg, chan);
+				retval = 1;
+			} else {
+				retval = dwc2_hc_continue_transfer(hsotg, chan);
+			}
+		} else {
+			retval = -1;
+		}
+	} else {
+		if (!chan->xfer_started) {
+			dwc2_hc_start_transfer(hsotg, chan);
+			retval = 1;
+		} else {
+			retval = dwc2_hc_continue_transfer(hsotg, chan);
+		}
+	}
+
+	return retval;
+}
+
+/*
+ * Processes periodic channels for the next frame and queues transactions for
+ * these channels to the DWC_otg controller. After queueing transactions, the
+ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
+ * to queue as Periodic Tx FIFO or request queue space becomes available.
+ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static void dwc2_process_periodic_channels(struct dwc2_hsotg *hsotg)
+{
+	struct list_head *qh_ptr;
+	struct dwc2_qh *qh;
+	u32 tx_status;
+	u32 fspcavail;
+	u32 gintmsk;
+	int status;
+	bool no_queue_space = false;
+	bool no_fifo_space = false;
+	u32 qspcavail;
+
+	/* If empty list then just adjust interrupt enables */
+	if (list_empty(&hsotg->periodic_sched_assigned))
+		goto exit;
+
+	if (dbg_perio())
+		dev_vdbg(hsotg->dev, "Queue periodic transactions\n");
+
+	tx_status = dwc2_readl(hsotg, HPTXSTS);
+	qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
+		    TXSTS_QSPCAVAIL_SHIFT;
+	fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
+		    TXSTS_FSPCAVAIL_SHIFT;
+
+	if (dbg_perio()) {
+		dev_vdbg(hsotg->dev, "  P Tx Req Queue Space Avail (before queue): %d\n",
+			 qspcavail);
+		dev_vdbg(hsotg->dev, "  P Tx FIFO Space Avail (before queue): %d\n",
+			 fspcavail);
+	}
+
+	qh_ptr = hsotg->periodic_sched_assigned.next;
+	while (qh_ptr != &hsotg->periodic_sched_assigned) {
+		tx_status = dwc2_readl(hsotg, HPTXSTS);
+		qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
+			    TXSTS_QSPCAVAIL_SHIFT;
+		if (qspcavail == 0) {
+			no_queue_space = true;
+			break;
+		}
+
+		qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
+		if (!qh->channel) {
+			qh_ptr = qh_ptr->next;
+			continue;
+		}
+
+		/* Make sure EP's TT buffer is clean before queueing qtds */
+		if (qh->tt_buffer_dirty) {
+			qh_ptr = qh_ptr->next;
+			continue;
+		}
+
+		/*
+		 * Set a flag if we're queuing high-bandwidth in slave mode.
+		 * The flag prevents any halts to get into the request queue in
+		 * the middle of multiple high-bandwidth packets getting queued.
+		 */
+		if (!hsotg->params.host_dma &&
+		    qh->channel->multi_count > 1)
+			hsotg->queuing_high_bandwidth = 1;
+
+		fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
+			    TXSTS_FSPCAVAIL_SHIFT;
+		status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail);
+		if (status < 0) {
+			no_fifo_space = true;
+			break;
+		}
+
+		/*
+		 * In Slave mode, stay on the current transfer until there is
+		 * nothing more to do or the high-bandwidth request count is
+		 * reached. In DMA mode, only need to queue one request. The
+		 * controller automatically handles multiple packets for
+		 * high-bandwidth transfers.
+		 */
+		if (hsotg->params.host_dma || status == 0 ||
+		    qh->channel->requests == qh->channel->multi_count) {
+			qh_ptr = qh_ptr->next;
+			/*
+			 * Move the QH from the periodic assigned schedule to
+			 * the periodic queued schedule
+			 */
+			list_move_tail(&qh->qh_list_entry,
+				       &hsotg->periodic_sched_queued);
+
+			/* done queuing high bandwidth */
+			hsotg->queuing_high_bandwidth = 0;
+		}
+	}
+
+exit:
+	if (no_queue_space || no_fifo_space ||
+	    (!hsotg->params.host_dma &&
+	     !list_empty(&hsotg->periodic_sched_assigned))) {
+		/*
+		 * May need to queue more transactions as the request
+		 * queue or Tx FIFO empties. Enable the periodic Tx
+		 * FIFO empty interrupt. (Always use the half-empty
+		 * level to ensure that new requests are loaded as
+		 * soon as possible.)
+		 */
+		gintmsk = dwc2_readl(hsotg, GINTMSK);
+		if (!(gintmsk & GINTSTS_PTXFEMP)) {
+			gintmsk |= GINTSTS_PTXFEMP;
+			dwc2_writel(hsotg, gintmsk, GINTMSK);
+		}
+	} else {
+		/*
+		 * Disable the Tx FIFO empty interrupt since there are
+		 * no more transactions that need to be queued right
+		 * now. This function is called from interrupt
+		 * handlers to queue more transactions as transfer
+		 * states change.
+		 */
+		gintmsk = dwc2_readl(hsotg, GINTMSK);
+		if (gintmsk & GINTSTS_PTXFEMP) {
+			gintmsk &= ~GINTSTS_PTXFEMP;
+			dwc2_writel(hsotg, gintmsk, GINTMSK);
+		}
+	}
+}
+
+/*
+ * Processes active non-periodic channels and queues transactions for these
+ * channels to the DWC_otg controller. After queueing transactions, the NP Tx
+ * FIFO Empty interrupt is enabled if there are more transactions to queue as
+ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
+ * FIFO Empty interrupt is disabled.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static void dwc2_process_non_periodic_channels(struct dwc2_hsotg *hsotg)
+{
+	struct list_head *orig_qh_ptr;
+	struct dwc2_qh *qh;
+	u32 tx_status;
+	u32 qspcavail;
+	u32 fspcavail;
+	u32 gintmsk;
+	int status;
+	int no_queue_space = 0;
+	int no_fifo_space = 0;
+	int more_to_do = 0;
+
+	dev_vdbg(hsotg->dev, "Queue non-periodic transactions\n");
+
+	tx_status = dwc2_readl(hsotg, GNPTXSTS);
+	qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
+		    TXSTS_QSPCAVAIL_SHIFT;
+	fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
+		    TXSTS_FSPCAVAIL_SHIFT;
+	dev_vdbg(hsotg->dev, "  NP Tx Req Queue Space Avail (before queue): %d\n",
+		 qspcavail);
+	dev_vdbg(hsotg->dev, "  NP Tx FIFO Space Avail (before queue): %d\n",
+		 fspcavail);
+
+	/*
+	 * Keep track of the starting point. Skip over the start-of-list
+	 * entry.
+	 */
+	if (hsotg->non_periodic_qh_ptr == &hsotg->non_periodic_sched_active)
+		hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next;
+	orig_qh_ptr = hsotg->non_periodic_qh_ptr;
+
+	/*
+	 * Process once through the active list or until no more space is
+	 * available in the request queue or the Tx FIFO
+	 */
+	do {
+		tx_status = dwc2_readl(hsotg, GNPTXSTS);
+		qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
+			    TXSTS_QSPCAVAIL_SHIFT;
+		if (!hsotg->params.host_dma && qspcavail == 0) {
+			no_queue_space = 1;
+			break;
+		}
+
+		qh = list_entry(hsotg->non_periodic_qh_ptr, struct dwc2_qh,
+				qh_list_entry);
+		if (!qh->channel)
+			goto next;
+
+		/* Make sure EP's TT buffer is clean before queueing qtds */
+		if (qh->tt_buffer_dirty)
+			goto next;
+
+		fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
+			    TXSTS_FSPCAVAIL_SHIFT;
+		status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail);
+
+		if (status > 0) {
+			more_to_do = 1;
+		} else if (status < 0) {
+			no_fifo_space = 1;
+			break;
+		}
+next:
+		/* Advance to next QH, skipping start-of-list entry */
+		hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next;
+		if (hsotg->non_periodic_qh_ptr ==
+				&hsotg->non_periodic_sched_active)
+			hsotg->non_periodic_qh_ptr =
+					hsotg->non_periodic_qh_ptr->next;
+	} while (hsotg->non_periodic_qh_ptr != orig_qh_ptr);
+
+	if (!hsotg->params.host_dma) {
+		tx_status = dwc2_readl(hsotg, GNPTXSTS);
+		qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
+			    TXSTS_QSPCAVAIL_SHIFT;
+		fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
+			    TXSTS_FSPCAVAIL_SHIFT;
+		dev_vdbg(hsotg->dev,
+			 "  NP Tx Req Queue Space Avail (after queue): %d\n",
+			 qspcavail);
+		dev_vdbg(hsotg->dev,
+			 "  NP Tx FIFO Space Avail (after queue): %d\n",
+			 fspcavail);
+
+		if (more_to_do || no_queue_space || no_fifo_space) {
+			/*
+			 * May need to queue more transactions as the request
+			 * queue or Tx FIFO empties. Enable the non-periodic
+			 * Tx FIFO empty interrupt. (Always use the half-empty
+			 * level to ensure that new requests are loaded as
+			 * soon as possible.)
+			 */
+			gintmsk = dwc2_readl(hsotg, GINTMSK);
+			gintmsk |= GINTSTS_NPTXFEMP;
+			dwc2_writel(hsotg, gintmsk, GINTMSK);
+		} else {
+			/*
+			 * Disable the Tx FIFO empty interrupt since there are
+			 * no more transactions that need to be queued right
+			 * now. This function is called from interrupt
+			 * handlers to queue more transactions as transfer
+			 * states change.
+			 */
+			gintmsk = dwc2_readl(hsotg, GINTMSK);
+			gintmsk &= ~GINTSTS_NPTXFEMP;
+			dwc2_writel(hsotg, gintmsk, GINTMSK);
+		}
+	}
+}
+
+/**
+ * dwc2_hcd_queue_transactions() - Processes the currently active host channels
+ * and queues transactions for these channels to the DWC_otg controller. Called
+ * from the HCD interrupt handler functions.
+ *
+ * @hsotg:   The HCD state structure
+ * @tr_type: The type(s) of transactions to queue (non-periodic, periodic,
+ *           or both)
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg,
+				 enum dwc2_transaction_type tr_type)
+{
+#ifdef DWC2_DEBUG_SOF
+	dev_vdbg(hsotg->dev, "Queue Transactions\n");
+#endif
+	/* Process host channels associated with periodic transfers */
+	if (tr_type == DWC2_TRANSACTION_PERIODIC ||
+	    tr_type == DWC2_TRANSACTION_ALL)
+		dwc2_process_periodic_channels(hsotg);
+
+	/* Process host channels associated with non-periodic transfers */
+	if (tr_type == DWC2_TRANSACTION_NON_PERIODIC ||
+	    tr_type == DWC2_TRANSACTION_ALL) {
+		if (!list_empty(&hsotg->non_periodic_sched_active)) {
+			dwc2_process_non_periodic_channels(hsotg);
+		} else {
+			/*
+			 * Ensure NP Tx FIFO empty interrupt is disabled when
+			 * there are no non-periodic transfers to process
+			 */
+			u32 gintmsk = dwc2_readl(hsotg, GINTMSK);
+
+			gintmsk &= ~GINTSTS_NPTXFEMP;
+			dwc2_writel(hsotg, gintmsk, GINTMSK);
+		}
+	}
+}
+
+static void dwc2_conn_id_status_change(struct work_struct *work)
+{
+	struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
+						wf_otg);
+	u32 count = 0;
+	u32 gotgctl;
+	unsigned long flags;
+
+	dev_dbg(hsotg->dev, "%s()\n", __func__);
+
+	gotgctl = dwc2_readl(hsotg, GOTGCTL);
+	dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl);
+	dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n",
+		!!(gotgctl & GOTGCTL_CONID_B));
+
+	/* B-Device connector (Device Mode) */
+	if (gotgctl & GOTGCTL_CONID_B) {
+		dwc2_vbus_supply_exit(hsotg);
+		/* Wait for switch to device mode */
+		dev_dbg(hsotg->dev, "connId B\n");
+		if (hsotg->bus_suspended) {
+			dev_info(hsotg->dev,
+				 "Do port resume before switching to device mode\n");
+			dwc2_port_resume(hsotg);
+		}
+		while (!dwc2_is_device_mode(hsotg)) {
+			dev_info(hsotg->dev,
+				 "Waiting for Peripheral Mode, Mode=%s\n",
+				 dwc2_is_host_mode(hsotg) ? "Host" :
+				 "Peripheral");
+			msleep(20);
+			/*
+			 * Sometimes the initial GOTGCTRL read is wrong, so
+			 * check it again and jump to host mode if that was
+			 * the case.
+			 */
+			gotgctl = dwc2_readl(hsotg, GOTGCTL);
+			if (!(gotgctl & GOTGCTL_CONID_B))
+				goto host;
+			if (++count > 250)
+				break;
+		}
+		if (count > 250)
+			dev_err(hsotg->dev,
+				"Connection id status change timed out\n");
+
+		/*
+		 * Exit Partial Power Down without restoring registers.
+		 * No need to check the return value as registers
+		 * are not being restored.
+		 */
+		if (hsotg->in_ppd && hsotg->lx_state == DWC2_L2)
+			dwc2_exit_partial_power_down(hsotg, 0, false);
+
+		hsotg->op_state = OTG_STATE_B_PERIPHERAL;
+		dwc2_core_init(hsotg, false);
+		dwc2_enable_global_interrupts(hsotg);
+		spin_lock_irqsave(&hsotg->lock, flags);
+		dwc2_hsotg_core_init_disconnected(hsotg, false);
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		/* Enable ACG feature in device mode,if supported */
+		dwc2_enable_acg(hsotg);
+		dwc2_hsotg_core_connect(hsotg);
+	} else {
+host:
+		/* A-Device connector (Host Mode) */
+		dev_dbg(hsotg->dev, "connId A\n");
+		while (!dwc2_is_host_mode(hsotg)) {
+			dev_info(hsotg->dev, "Waiting for Host Mode, Mode=%s\n",
+				 dwc2_is_host_mode(hsotg) ?
+				 "Host" : "Peripheral");
+			msleep(20);
+			if (++count > 250)
+				break;
+		}
+		if (count > 250)
+			dev_err(hsotg->dev,
+				"Connection id status change timed out\n");
+
+		spin_lock_irqsave(&hsotg->lock, flags);
+		dwc2_hsotg_disconnect(hsotg);
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+
+		hsotg->op_state = OTG_STATE_A_HOST;
+		/* Initialize the Core for Host mode */
+		dwc2_core_init(hsotg, false);
+		dwc2_enable_global_interrupts(hsotg);
+		dwc2_hcd_start(hsotg);
+	}
+}
+
+static void dwc2_wakeup_detected(struct timer_list *t)
+{
+	struct dwc2_hsotg *hsotg = from_timer(hsotg, t, wkp_timer);
+	u32 hprt0;
+
+	dev_dbg(hsotg->dev, "%s()\n", __func__);
+
+	/*
+	 * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
+	 * so that OPT tests pass with all PHYs.)
+	 */
+	hprt0 = dwc2_read_hprt0(hsotg);
+	dev_dbg(hsotg->dev, "Resume: HPRT0=%0x\n", hprt0);
+	hprt0 &= ~HPRT0_RES;
+	dwc2_writel(hsotg, hprt0, HPRT0);
+	dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n",
+		dwc2_readl(hsotg, HPRT0));
+
+	dwc2_hcd_rem_wakeup(hsotg);
+	hsotg->bus_suspended = false;
+
+	/* Change to L0 state */
+	hsotg->lx_state = DWC2_L0;
+}
+
+static int dwc2_host_is_b_hnp_enabled(struct dwc2_hsotg *hsotg)
+{
+	struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg);
+
+	return hcd->self.b_hnp_enable;
+}
+
+/**
+ * dwc2_port_suspend() - Put controller in suspend mode for host.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @windex: The control request wIndex field
+ *
+ * Return: non-zero if failed to enter suspend mode for host.
+ *
+ * This function is for entering Host mode suspend.
+ * Must NOT be called with interrupt disabled or spinlock held.
+ */
+int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex)
+{
+	unsigned long flags;
+	u32 pcgctl;
+	u32 gotgctl;
+	int ret = 0;
+
+	dev_dbg(hsotg->dev, "%s()\n", __func__);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	if (windex == hsotg->otg_port && dwc2_host_is_b_hnp_enabled(hsotg)) {
+		gotgctl = dwc2_readl(hsotg, GOTGCTL);
+		gotgctl |= GOTGCTL_HSTSETHNPEN;
+		dwc2_writel(hsotg, gotgctl, GOTGCTL);
+		hsotg->op_state = OTG_STATE_A_SUSPEND;
+	}
+
+	switch (hsotg->params.power_down) {
+	case DWC2_POWER_DOWN_PARAM_PARTIAL:
+		ret = dwc2_enter_partial_power_down(hsotg);
+		if (ret)
+			dev_err(hsotg->dev,
+				"enter partial_power_down failed.\n");
+		break;
+	case DWC2_POWER_DOWN_PARAM_HIBERNATION:
+		/*
+		 * Perform spin unlock and lock because in
+		 * "dwc2_host_enter_hibernation()" function there is a spinlock
+		 * logic which prevents servicing of any IRQ during entering
+		 * hibernation.
+		 */
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		ret = dwc2_enter_hibernation(hsotg, 1);
+		if (ret)
+			dev_err(hsotg->dev, "enter hibernation failed.\n");
+		spin_lock_irqsave(&hsotg->lock, flags);
+		break;
+	case DWC2_POWER_DOWN_PARAM_NONE:
+		/*
+		 * If not hibernation nor partial power down are supported,
+		 * clock gating is used to save power.
+		 */
+		if (!hsotg->params.no_clock_gating)
+			dwc2_host_enter_clock_gating(hsotg);
+		break;
+	}
+
+	/* For HNP the bus must be suspended for at least 200ms */
+	if (dwc2_host_is_b_hnp_enabled(hsotg)) {
+		pcgctl = dwc2_readl(hsotg, PCGCTL);
+		pcgctl &= ~PCGCTL_STOPPCLK;
+		dwc2_writel(hsotg, pcgctl, PCGCTL);
+
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+
+		msleep(200);
+	} else {
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+	}
+
+	return ret;
+}
+
+/**
+ * dwc2_port_resume() - Exit controller from suspend mode for host.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ * Return: non-zero if failed to exit suspend mode for host.
+ *
+ * This function is for exiting Host mode suspend.
+ * Must NOT be called with interrupt disabled or spinlock held.
+ */
+int dwc2_port_resume(struct dwc2_hsotg *hsotg)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	switch (hsotg->params.power_down) {
+	case DWC2_POWER_DOWN_PARAM_PARTIAL:
+		ret = dwc2_exit_partial_power_down(hsotg, 0, true);
+		if (ret)
+			dev_err(hsotg->dev,
+				"exit partial_power_down failed.\n");
+		break;
+	case DWC2_POWER_DOWN_PARAM_HIBERNATION:
+		/* Exit host hibernation. */
+		ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
+		if (ret)
+			dev_err(hsotg->dev, "exit hibernation failed.\n");
+		break;
+	case DWC2_POWER_DOWN_PARAM_NONE:
+		/*
+		 * If not hibernation nor partial power down are supported,
+		 * port resume is done using the clock gating programming flow.
+		 */
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		dwc2_host_exit_clock_gating(hsotg, 0);
+		spin_lock_irqsave(&hsotg->lock, flags);
+		break;
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return ret;
+}
+
+/* Handles hub class-specific requests */
+static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
+				u16 wvalue, u16 windex, char *buf, u16 wlength)
+{
+	struct usb_hub_descriptor *hub_desc;
+	int retval = 0;
+	u32 hprt0;
+	u32 port_status;
+	u32 speed;
+	u32 pcgctl;
+	u32 pwr;
+
+	switch (typereq) {
+	case ClearHubFeature:
+		dev_dbg(hsotg->dev, "ClearHubFeature %1xh\n", wvalue);
+
+		switch (wvalue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* Nothing required here */
+			break;
+
+		default:
+			retval = -EINVAL;
+			dev_err(hsotg->dev,
+				"ClearHubFeature request %1xh unknown\n",
+				wvalue);
+		}
+		break;
+
+	case ClearPortFeature:
+		if (wvalue != USB_PORT_FEAT_L1)
+			if (!windex || windex > 1)
+				goto error;
+		switch (wvalue) {
+		case USB_PORT_FEAT_ENABLE:
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_ENABLE\n");
+			hprt0 = dwc2_read_hprt0(hsotg);
+			hprt0 |= HPRT0_ENA;
+			dwc2_writel(hsotg, hprt0, HPRT0);
+			break;
+
+		case USB_PORT_FEAT_SUSPEND:
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
+
+			if (hsotg->bus_suspended)
+				retval = dwc2_port_resume(hsotg);
+			break;
+
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_POWER\n");
+			hprt0 = dwc2_read_hprt0(hsotg);
+			pwr = hprt0 & HPRT0_PWR;
+			hprt0 &= ~HPRT0_PWR;
+			dwc2_writel(hsotg, hprt0, HPRT0);
+			if (pwr)
+				dwc2_vbus_supply_exit(hsotg);
+			break;
+
+		case USB_PORT_FEAT_INDICATOR:
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
+			/* Port indicator not supported */
+			break;
+
+		case USB_PORT_FEAT_C_CONNECTION:
+			/*
+			 * Clears driver's internal Connect Status Change flag
+			 */
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
+			hsotg->flags.b.port_connect_status_change = 0;
+			break;
+
+		case USB_PORT_FEAT_C_RESET:
+			/* Clears driver's internal Port Reset Change flag */
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_C_RESET\n");
+			hsotg->flags.b.port_reset_change = 0;
+			break;
+
+		case USB_PORT_FEAT_C_ENABLE:
+			/*
+			 * Clears the driver's internal Port Enable/Disable
+			 * Change flag
+			 */
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
+			hsotg->flags.b.port_enable_change = 0;
+			break;
+
+		case USB_PORT_FEAT_C_SUSPEND:
+			/*
+			 * Clears the driver's internal Port Suspend Change
+			 * flag, which is set when resume signaling on the host
+			 * port is complete
+			 */
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
+			hsotg->flags.b.port_suspend_change = 0;
+			break;
+
+		case USB_PORT_FEAT_C_PORT_L1:
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_C_PORT_L1\n");
+			hsotg->flags.b.port_l1_change = 0;
+			break;
+
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
+			hsotg->flags.b.port_over_current_change = 0;
+			break;
+
+		default:
+			retval = -EINVAL;
+			dev_err(hsotg->dev,
+				"ClearPortFeature request %1xh unknown or unsupported\n",
+				wvalue);
+		}
+		break;
+
+	case GetHubDescriptor:
+		dev_dbg(hsotg->dev, "GetHubDescriptor\n");
+		hub_desc = (struct usb_hub_descriptor *)buf;
+		hub_desc->bDescLength = 9;
+		hub_desc->bDescriptorType = USB_DT_HUB;
+		hub_desc->bNbrPorts = 1;
+		hub_desc->wHubCharacteristics =
+			cpu_to_le16(HUB_CHAR_COMMON_LPSM |
+				    HUB_CHAR_INDV_PORT_OCPM);
+		hub_desc->bPwrOn2PwrGood = 1;
+		hub_desc->bHubContrCurrent = 0;
+		hub_desc->u.hs.DeviceRemovable[0] = 0;
+		hub_desc->u.hs.DeviceRemovable[1] = 0xff;
+		break;
+
+	case GetHubStatus:
+		dev_dbg(hsotg->dev, "GetHubStatus\n");
+		memset(buf, 0, 4);
+		break;
+
+	case GetPortStatus:
+		dev_vdbg(hsotg->dev,
+			 "GetPortStatus wIndex=0x%04x flags=0x%08x\n", windex,
+			 hsotg->flags.d32);
+		if (!windex || windex > 1)
+			goto error;
+
+		port_status = 0;
+		if (hsotg->flags.b.port_connect_status_change)
+			port_status |= USB_PORT_STAT_C_CONNECTION << 16;
+		if (hsotg->flags.b.port_enable_change)
+			port_status |= USB_PORT_STAT_C_ENABLE << 16;
+		if (hsotg->flags.b.port_suspend_change)
+			port_status |= USB_PORT_STAT_C_SUSPEND << 16;
+		if (hsotg->flags.b.port_l1_change)
+			port_status |= USB_PORT_STAT_C_L1 << 16;
+		if (hsotg->flags.b.port_reset_change)
+			port_status |= USB_PORT_STAT_C_RESET << 16;
+		if (hsotg->flags.b.port_over_current_change) {
+			dev_warn(hsotg->dev, "Overcurrent change detected\n");
+			port_status |= USB_PORT_STAT_C_OVERCURRENT << 16;
+		}
+
+		if (!hsotg->flags.b.port_connect_status) {
+			/*
+			 * The port is disconnected, which means the core is
+			 * either in device mode or it soon will be. Just
+			 * return 0's for the remainder of the port status
+			 * since the port register can't be read if the core
+			 * is in device mode.
+			 */
+			*(__le32 *)buf = cpu_to_le32(port_status);
+			break;
+		}
+
+		hprt0 = dwc2_readl(hsotg, HPRT0);
+		dev_vdbg(hsotg->dev, "  HPRT0: 0x%08x\n", hprt0);
+
+		if (hprt0 & HPRT0_CONNSTS)
+			port_status |= USB_PORT_STAT_CONNECTION;
+		if (hprt0 & HPRT0_ENA)
+			port_status |= USB_PORT_STAT_ENABLE;
+		if (hprt0 & HPRT0_SUSP)
+			port_status |= USB_PORT_STAT_SUSPEND;
+		if (hprt0 & HPRT0_OVRCURRACT)
+			port_status |= USB_PORT_STAT_OVERCURRENT;
+		if (hprt0 & HPRT0_RST)
+			port_status |= USB_PORT_STAT_RESET;
+		if (hprt0 & HPRT0_PWR)
+			port_status |= USB_PORT_STAT_POWER;
+
+		speed = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
+		if (speed == HPRT0_SPD_HIGH_SPEED)
+			port_status |= USB_PORT_STAT_HIGH_SPEED;
+		else if (speed == HPRT0_SPD_LOW_SPEED)
+			port_status |= USB_PORT_STAT_LOW_SPEED;
+
+		if (hprt0 & HPRT0_TSTCTL_MASK)
+			port_status |= USB_PORT_STAT_TEST;
+		/* USB_PORT_FEAT_INDICATOR unsupported always 0 */
+
+		if (hsotg->params.dma_desc_fs_enable) {
+			/*
+			 * Enable descriptor DMA only if a full speed
+			 * device is connected.
+			 */
+			if (hsotg->new_connection &&
+			    ((port_status &
+			      (USB_PORT_STAT_CONNECTION |
+			       USB_PORT_STAT_HIGH_SPEED |
+			       USB_PORT_STAT_LOW_SPEED)) ==
+			       USB_PORT_STAT_CONNECTION)) {
+				u32 hcfg;
+
+				dev_info(hsotg->dev, "Enabling descriptor DMA mode\n");
+				hsotg->params.dma_desc_enable = true;
+				hcfg = dwc2_readl(hsotg, HCFG);
+				hcfg |= HCFG_DESCDMA;
+				dwc2_writel(hsotg, hcfg, HCFG);
+				hsotg->new_connection = false;
+			}
+		}
+
+		dev_vdbg(hsotg->dev, "port_status=%08x\n", port_status);
+		*(__le32 *)buf = cpu_to_le32(port_status);
+		break;
+
+	case SetHubFeature:
+		dev_dbg(hsotg->dev, "SetHubFeature\n");
+		/* No HUB features supported */
+		break;
+
+	case SetPortFeature:
+		dev_dbg(hsotg->dev, "SetPortFeature\n");
+		if (wvalue != USB_PORT_FEAT_TEST && (!windex || windex > 1))
+			goto error;
+
+		if (!hsotg->flags.b.port_connect_status) {
+			/*
+			 * The port is disconnected, which means the core is
+			 * either in device mode or it soon will be. Just
+			 * return without doing anything since the port
+			 * register can't be written if the core is in device
+			 * mode.
+			 */
+			break;
+		}
+
+		switch (wvalue) {
+		case USB_PORT_FEAT_SUSPEND:
+			dev_dbg(hsotg->dev,
+				"SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
+			if (windex != hsotg->otg_port)
+				goto error;
+			if (!hsotg->bus_suspended)
+				retval = dwc2_port_suspend(hsotg, windex);
+			break;
+
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(hsotg->dev,
+				"SetPortFeature - USB_PORT_FEAT_POWER\n");
+			hprt0 = dwc2_read_hprt0(hsotg);
+			pwr = hprt0 & HPRT0_PWR;
+			hprt0 |= HPRT0_PWR;
+			dwc2_writel(hsotg, hprt0, HPRT0);
+			if (!pwr)
+				dwc2_vbus_supply_init(hsotg);
+			break;
+
+		case USB_PORT_FEAT_RESET:
+			dev_dbg(hsotg->dev,
+				"SetPortFeature - USB_PORT_FEAT_RESET\n");
+
+			hprt0 = dwc2_read_hprt0(hsotg);
+
+			if (hsotg->hibernated) {
+				retval = dwc2_exit_hibernation(hsotg, 0, 1, 1);
+				if (retval)
+					dev_err(hsotg->dev,
+						"exit hibernation failed\n");
+			}
+
+			if (hsotg->in_ppd) {
+				retval = dwc2_exit_partial_power_down(hsotg, 1,
+								      true);
+				if (retval)
+					dev_err(hsotg->dev,
+						"exit partial_power_down failed\n");
+			}
+
+			if (hsotg->params.power_down ==
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
+				dwc2_host_exit_clock_gating(hsotg, 0);
+
+			pcgctl = dwc2_readl(hsotg, PCGCTL);
+			pcgctl &= ~(PCGCTL_ENBL_SLEEP_GATING | PCGCTL_STOPPCLK);
+			dwc2_writel(hsotg, pcgctl, PCGCTL);
+			/* ??? Original driver does this */
+			dwc2_writel(hsotg, 0, PCGCTL);
+
+			hprt0 = dwc2_read_hprt0(hsotg);
+			pwr = hprt0 & HPRT0_PWR;
+			/* Clear suspend bit if resetting from suspend state */
+			hprt0 &= ~HPRT0_SUSP;
+
+			/*
+			 * When B-Host the Port reset bit is set in the Start
+			 * HCD Callback function, so that the reset is started
+			 * within 1ms of the HNP success interrupt
+			 */
+			if (!dwc2_hcd_is_b_host(hsotg)) {
+				hprt0 |= HPRT0_PWR | HPRT0_RST;
+				dev_dbg(hsotg->dev,
+					"In host mode, hprt0=%08x\n", hprt0);
+				dwc2_writel(hsotg, hprt0, HPRT0);
+				if (!pwr)
+					dwc2_vbus_supply_init(hsotg);
+			}
+
+			/* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
+			msleep(50);
+			hprt0 &= ~HPRT0_RST;
+			dwc2_writel(hsotg, hprt0, HPRT0);
+			hsotg->lx_state = DWC2_L0; /* Now back to On state */
+			break;
+
+		case USB_PORT_FEAT_INDICATOR:
+			dev_dbg(hsotg->dev,
+				"SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
+			/* Not supported */
+			break;
+
+		case USB_PORT_FEAT_TEST:
+			hprt0 = dwc2_read_hprt0(hsotg);
+			dev_dbg(hsotg->dev,
+				"SetPortFeature - USB_PORT_FEAT_TEST\n");
+			hprt0 &= ~HPRT0_TSTCTL_MASK;
+			hprt0 |= (windex >> 8) << HPRT0_TSTCTL_SHIFT;
+			dwc2_writel(hsotg, hprt0, HPRT0);
+			break;
+
+		default:
+			retval = -EINVAL;
+			dev_err(hsotg->dev,
+				"SetPortFeature %1xh unknown or unsupported\n",
+				wvalue);
+			break;
+		}
+		break;
+
+	default:
+error:
+		retval = -EINVAL;
+		dev_dbg(hsotg->dev,
+			"Unknown hub control request: %1xh wIndex: %1xh wValue: %1xh\n",
+			typereq, windex, wvalue);
+		break;
+	}
+
+	return retval;
+}
+
+static int dwc2_hcd_is_status_changed(struct dwc2_hsotg *hsotg, int port)
+{
+	int retval;
+
+	if (port != 1)
+		return -EINVAL;
+
+	retval = (hsotg->flags.b.port_connect_status_change ||
+		  hsotg->flags.b.port_reset_change ||
+		  hsotg->flags.b.port_enable_change ||
+		  hsotg->flags.b.port_suspend_change ||
+		  hsotg->flags.b.port_over_current_change);
+
+	if (retval) {
+		dev_dbg(hsotg->dev,
+			"DWC OTG HCD HUB STATUS DATA: Root port status changed\n");
+		dev_dbg(hsotg->dev, "  port_connect_status_change: %d\n",
+			hsotg->flags.b.port_connect_status_change);
+		dev_dbg(hsotg->dev, "  port_reset_change: %d\n",
+			hsotg->flags.b.port_reset_change);
+		dev_dbg(hsotg->dev, "  port_enable_change: %d\n",
+			hsotg->flags.b.port_enable_change);
+		dev_dbg(hsotg->dev, "  port_suspend_change: %d\n",
+			hsotg->flags.b.port_suspend_change);
+		dev_dbg(hsotg->dev, "  port_over_current_change: %d\n",
+			hsotg->flags.b.port_over_current_change);
+	}
+
+	return retval;
+}
+
+int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg)
+{
+	u32 hfnum = dwc2_readl(hsotg, HFNUM);
+
+#ifdef DWC2_DEBUG_SOF
+	dev_vdbg(hsotg->dev, "DWC OTG HCD GET FRAME NUMBER %d\n",
+		 (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT);
+#endif
+	return (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT;
+}
+
+int dwc2_hcd_get_future_frame_number(struct dwc2_hsotg *hsotg, int us)
+{
+	u32 hprt = dwc2_readl(hsotg, HPRT0);
+	u32 hfir = dwc2_readl(hsotg, HFIR);
+	u32 hfnum = dwc2_readl(hsotg, HFNUM);
+	unsigned int us_per_frame;
+	unsigned int frame_number;
+	unsigned int remaining;
+	unsigned int interval;
+	unsigned int phy_clks;
+
+	/* High speed has 125 us per (micro) frame; others are 1 ms per */
+	us_per_frame = (hprt & HPRT0_SPD_MASK) ? 1000 : 125;
+
+	/* Extract fields */
+	frame_number = (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT;
+	remaining = (hfnum & HFNUM_FRREM_MASK) >> HFNUM_FRREM_SHIFT;
+	interval = (hfir & HFIR_FRINT_MASK) >> HFIR_FRINT_SHIFT;
+
+	/*
+	 * Number of phy clocks since the last tick of the frame number after
+	 * "us" has passed.
+	 */
+	phy_clks = (interval - remaining) +
+		   DIV_ROUND_UP(interval * us, us_per_frame);
+
+	return dwc2_frame_num_inc(frame_number, phy_clks / interval);
+}
+
+int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg)
+{
+	return hsotg->op_state == OTG_STATE_B_HOST;
+}
+
+static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg,
+					       int iso_desc_count,
+					       gfp_t mem_flags)
+{
+	struct dwc2_hcd_urb *urb;
+
+	urb = kzalloc(struct_size(urb, iso_descs, iso_desc_count), mem_flags);
+	if (urb)
+		urb->packet_count = iso_desc_count;
+	return urb;
+}
+
+static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg,
+				      struct dwc2_hcd_urb *urb, u8 dev_addr,
+				      u8 ep_num, u8 ep_type, u8 ep_dir,
+				      u16 maxp, u16 maxp_mult)
+{
+	if (dbg_perio() ||
+	    ep_type == USB_ENDPOINT_XFER_BULK ||
+	    ep_type == USB_ENDPOINT_XFER_CONTROL)
+		dev_vdbg(hsotg->dev,
+			 "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, maxp=%d (%d mult)\n",
+			 dev_addr, ep_num, ep_dir, ep_type, maxp, maxp_mult);
+	urb->pipe_info.dev_addr = dev_addr;
+	urb->pipe_info.ep_num = ep_num;
+	urb->pipe_info.pipe_type = ep_type;
+	urb->pipe_info.pipe_dir = ep_dir;
+	urb->pipe_info.maxp = maxp;
+	urb->pipe_info.maxp_mult = maxp_mult;
+}
+
+/*
+ * NOTE: This function will be removed once the peripheral controller code
+ * is integrated and the driver is stable
+ */
+void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg)
+{
+#ifdef DEBUG
+	struct dwc2_host_chan *chan;
+	struct dwc2_hcd_urb *urb;
+	struct dwc2_qtd *qtd;
+	int num_channels;
+	u32 np_tx_status;
+	u32 p_tx_status;
+	int i;
+
+	num_channels = hsotg->params.host_channels;
+	dev_dbg(hsotg->dev, "\n");
+	dev_dbg(hsotg->dev,
+		"************************************************************\n");
+	dev_dbg(hsotg->dev, "HCD State:\n");
+	dev_dbg(hsotg->dev, "  Num channels: %d\n", num_channels);
+
+	for (i = 0; i < num_channels; i++) {
+		chan = hsotg->hc_ptr_array[i];
+		dev_dbg(hsotg->dev, "  Channel %d:\n", i);
+		dev_dbg(hsotg->dev,
+			"    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
+			chan->dev_addr, chan->ep_num, chan->ep_is_in);
+		dev_dbg(hsotg->dev, "    speed: %d\n", chan->speed);
+		dev_dbg(hsotg->dev, "    ep_type: %d\n", chan->ep_type);
+		dev_dbg(hsotg->dev, "    max_packet: %d\n", chan->max_packet);
+		dev_dbg(hsotg->dev, "    data_pid_start: %d\n",
+			chan->data_pid_start);
+		dev_dbg(hsotg->dev, "    multi_count: %d\n", chan->multi_count);
+		dev_dbg(hsotg->dev, "    xfer_started: %d\n",
+			chan->xfer_started);
+		dev_dbg(hsotg->dev, "    xfer_buf: %p\n", chan->xfer_buf);
+		dev_dbg(hsotg->dev, "    xfer_dma: %08lx\n",
+			(unsigned long)chan->xfer_dma);
+		dev_dbg(hsotg->dev, "    xfer_len: %d\n", chan->xfer_len);
+		dev_dbg(hsotg->dev, "    xfer_count: %d\n", chan->xfer_count);
+		dev_dbg(hsotg->dev, "    halt_on_queue: %d\n",
+			chan->halt_on_queue);
+		dev_dbg(hsotg->dev, "    halt_pending: %d\n",
+			chan->halt_pending);
+		dev_dbg(hsotg->dev, "    halt_status: %d\n", chan->halt_status);
+		dev_dbg(hsotg->dev, "    do_split: %d\n", chan->do_split);
+		dev_dbg(hsotg->dev, "    complete_split: %d\n",
+			chan->complete_split);
+		dev_dbg(hsotg->dev, "    hub_addr: %d\n", chan->hub_addr);
+		dev_dbg(hsotg->dev, "    hub_port: %d\n", chan->hub_port);
+		dev_dbg(hsotg->dev, "    xact_pos: %d\n", chan->xact_pos);
+		dev_dbg(hsotg->dev, "    requests: %d\n", chan->requests);
+		dev_dbg(hsotg->dev, "    qh: %p\n", chan->qh);
+
+		if (chan->xfer_started) {
+			u32 hfnum, hcchar, hctsiz, hcint, hcintmsk;
+
+			hfnum = dwc2_readl(hsotg, HFNUM);
+			hcchar = dwc2_readl(hsotg, HCCHAR(i));
+			hctsiz = dwc2_readl(hsotg, HCTSIZ(i));
+			hcint = dwc2_readl(hsotg, HCINT(i));
+			hcintmsk = dwc2_readl(hsotg, HCINTMSK(i));
+			dev_dbg(hsotg->dev, "    hfnum: 0x%08x\n", hfnum);
+			dev_dbg(hsotg->dev, "    hcchar: 0x%08x\n", hcchar);
+			dev_dbg(hsotg->dev, "    hctsiz: 0x%08x\n", hctsiz);
+			dev_dbg(hsotg->dev, "    hcint: 0x%08x\n", hcint);
+			dev_dbg(hsotg->dev, "    hcintmsk: 0x%08x\n", hcintmsk);
+		}
+
+		if (!(chan->xfer_started && chan->qh))
+			continue;
+
+		list_for_each_entry(qtd, &chan->qh->qtd_list, qtd_list_entry) {
+			if (!qtd->in_process)
+				break;
+			urb = qtd->urb;
+			dev_dbg(hsotg->dev, "    URB Info:\n");
+			dev_dbg(hsotg->dev, "      qtd: %p, urb: %p\n",
+				qtd, urb);
+			if (urb) {
+				dev_dbg(hsotg->dev,
+					"      Dev: %d, EP: %d %s\n",
+					dwc2_hcd_get_dev_addr(&urb->pipe_info),
+					dwc2_hcd_get_ep_num(&urb->pipe_info),
+					dwc2_hcd_is_pipe_in(&urb->pipe_info) ?
+					"IN" : "OUT");
+				dev_dbg(hsotg->dev,
+					"      Max packet size: %d (%d mult)\n",
+					dwc2_hcd_get_maxp(&urb->pipe_info),
+					dwc2_hcd_get_maxp_mult(&urb->pipe_info));
+				dev_dbg(hsotg->dev,
+					"      transfer_buffer: %p\n",
+					urb->buf);
+				dev_dbg(hsotg->dev,
+					"      transfer_dma: %08lx\n",
+					(unsigned long)urb->dma);
+				dev_dbg(hsotg->dev,
+					"      transfer_buffer_length: %d\n",
+					urb->length);
+				dev_dbg(hsotg->dev, "      actual_length: %d\n",
+					urb->actual_length);
+			}
+		}
+	}
+
+	dev_dbg(hsotg->dev, "  non_periodic_channels: %d\n",
+		hsotg->non_periodic_channels);
+	dev_dbg(hsotg->dev, "  periodic_channels: %d\n",
+		hsotg->periodic_channels);
+	dev_dbg(hsotg->dev, "  periodic_usecs: %d\n", hsotg->periodic_usecs);
+	np_tx_status = dwc2_readl(hsotg, GNPTXSTS);
+	dev_dbg(hsotg->dev, "  NP Tx Req Queue Space Avail: %d\n",
+		(np_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT);
+	dev_dbg(hsotg->dev, "  NP Tx FIFO Space Avail: %d\n",
+		(np_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT);
+	p_tx_status = dwc2_readl(hsotg, HPTXSTS);
+	dev_dbg(hsotg->dev, "  P Tx Req Queue Space Avail: %d\n",
+		(p_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT);
+	dev_dbg(hsotg->dev, "  P Tx FIFO Space Avail: %d\n",
+		(p_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT);
+	dwc2_dump_global_registers(hsotg);
+	dwc2_dump_host_registers(hsotg);
+	dev_dbg(hsotg->dev,
+		"************************************************************\n");
+	dev_dbg(hsotg->dev, "\n");
+#endif
+}
+
+struct wrapper_priv_data {
+	struct dwc2_hsotg *hsotg;
+};
+
+/* Gets the dwc2_hsotg from a usb_hcd */
+static struct dwc2_hsotg *dwc2_hcd_to_hsotg(struct usb_hcd *hcd)
+{
+	struct wrapper_priv_data *p;
+
+	p = (struct wrapper_priv_data *)&hcd->hcd_priv;
+	return p->hsotg;
+}
+
+/**
+ * dwc2_host_get_tt_info() - Get the dwc2_tt associated with context
+ *
+ * This will get the dwc2_tt structure (and ttport) associated with the given
+ * context (which is really just a struct urb pointer).
+ *
+ * The first time this is called for a given TT we allocate memory for our
+ * structure.  When everyone is done and has called dwc2_host_put_tt_info()
+ * then the refcount for the structure will go to 0 and we'll free it.
+ *
+ * @hsotg:     The HCD state structure for the DWC OTG controller.
+ * @context:   The priv pointer from a struct dwc2_hcd_urb.
+ * @mem_flags: Flags for allocating memory.
+ * @ttport:    We'll return this device's port number here.  That's used to
+ *             reference into the bitmap if we're on a multi_tt hub.
+ *
+ * Return: a pointer to a struct dwc2_tt.  Don't forget to call
+ *         dwc2_host_put_tt_info()!  Returns NULL upon memory alloc failure.
+ */
+
+struct dwc2_tt *dwc2_host_get_tt_info(struct dwc2_hsotg *hsotg, void *context,
+				      gfp_t mem_flags, int *ttport)
+{
+	struct urb *urb = context;
+	struct dwc2_tt *dwc_tt = NULL;
+
+	if (urb->dev->tt) {
+		*ttport = urb->dev->ttport;
+
+		dwc_tt = urb->dev->tt->hcpriv;
+		if (!dwc_tt) {
+			size_t bitmap_size;
+
+			/*
+			 * For single_tt we need one schedule.  For multi_tt
+			 * we need one per port.
+			 */
+			bitmap_size = DWC2_ELEMENTS_PER_LS_BITMAP *
+				      sizeof(dwc_tt->periodic_bitmaps[0]);
+			if (urb->dev->tt->multi)
+				bitmap_size *= urb->dev->tt->hub->maxchild;
+
+			dwc_tt = kzalloc(sizeof(*dwc_tt) + bitmap_size,
+					 mem_flags);
+			if (!dwc_tt)
+				return NULL;
+
+			dwc_tt->usb_tt = urb->dev->tt;
+			dwc_tt->usb_tt->hcpriv = dwc_tt;
+		}
+
+		dwc_tt->refcount++;
+	}
+
+	return dwc_tt;
+}
+
+/**
+ * dwc2_host_put_tt_info() - Put the dwc2_tt from dwc2_host_get_tt_info()
+ *
+ * Frees resources allocated by dwc2_host_get_tt_info() if all current holders
+ * of the structure are done.
+ *
+ * It's OK to call this with NULL.
+ *
+ * @hsotg:     The HCD state structure for the DWC OTG controller.
+ * @dwc_tt:    The pointer returned by dwc2_host_get_tt_info.
+ */
+void dwc2_host_put_tt_info(struct dwc2_hsotg *hsotg, struct dwc2_tt *dwc_tt)
+{
+	/* Model kfree and make put of NULL a no-op */
+	if (!dwc_tt)
+		return;
+
+	WARN_ON(dwc_tt->refcount < 1);
+
+	dwc_tt->refcount--;
+	if (!dwc_tt->refcount) {
+		dwc_tt->usb_tt->hcpriv = NULL;
+		kfree(dwc_tt);
+	}
+}
+
+int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context)
+{
+	struct urb *urb = context;
+
+	return urb->dev->speed;
+}
+
+static void dwc2_allocate_bus_bandwidth(struct usb_hcd *hcd, u16 bw,
+					struct urb *urb)
+{
+	struct usb_bus *bus = hcd_to_bus(hcd);
+
+	if (urb->interval)
+		bus->bandwidth_allocated += bw / urb->interval;
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+		bus->bandwidth_isoc_reqs++;
+	else
+		bus->bandwidth_int_reqs++;
+}
+
+static void dwc2_free_bus_bandwidth(struct usb_hcd *hcd, u16 bw,
+				    struct urb *urb)
+{
+	struct usb_bus *bus = hcd_to_bus(hcd);
+
+	if (urb->interval)
+		bus->bandwidth_allocated -= bw / urb->interval;
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+		bus->bandwidth_isoc_reqs--;
+	else
+		bus->bandwidth_int_reqs--;
+}
+
+/*
+ * Sets the final status of an URB and returns it to the upper layer. Any
+ * required cleanup of the URB is performed.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
+			int status)
+{
+	struct urb *urb;
+	int i;
+
+	if (!qtd) {
+		dev_dbg(hsotg->dev, "## %s: qtd is NULL ##\n", __func__);
+		return;
+	}
+
+	if (!qtd->urb) {
+		dev_dbg(hsotg->dev, "## %s: qtd->urb is NULL ##\n", __func__);
+		return;
+	}
+
+	urb = qtd->urb->priv;
+	if (!urb) {
+		dev_dbg(hsotg->dev, "## %s: urb->priv is NULL ##\n", __func__);
+		return;
+	}
+
+	urb->actual_length = dwc2_hcd_urb_get_actual_length(qtd->urb);
+
+	if (dbg_urb(urb))
+		dev_vdbg(hsotg->dev,
+			 "%s: urb %p device %d ep %d-%s status %d actual %d\n",
+			 __func__, urb, usb_pipedevice(urb->pipe),
+			 usb_pipeendpoint(urb->pipe),
+			 usb_pipein(urb->pipe) ? "IN" : "OUT", status,
+			 urb->actual_length);
+
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+		urb->error_count = dwc2_hcd_urb_get_error_count(qtd->urb);
+		for (i = 0; i < urb->number_of_packets; ++i) {
+			urb->iso_frame_desc[i].actual_length =
+				dwc2_hcd_urb_get_iso_desc_actual_length(
+						qtd->urb, i);
+			urb->iso_frame_desc[i].status =
+				dwc2_hcd_urb_get_iso_desc_status(qtd->urb, i);
+		}
+	}
+
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS && dbg_perio()) {
+		for (i = 0; i < urb->number_of_packets; i++)
+			dev_vdbg(hsotg->dev, " ISO Desc %d status %d\n",
+				 i, urb->iso_frame_desc[i].status);
+	}
+
+	urb->status = status;
+	if (!status) {
+		if ((urb->transfer_flags & URB_SHORT_NOT_OK) &&
+		    urb->actual_length < urb->transfer_buffer_length)
+			urb->status = -EREMOTEIO;
+	}
+
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS ||
+	    usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
+		struct usb_host_endpoint *ep = urb->ep;
+
+		if (ep)
+			dwc2_free_bus_bandwidth(dwc2_hsotg_to_hcd(hsotg),
+					dwc2_hcd_get_ep_bandwidth(hsotg, ep),
+					urb);
+	}
+
+	usb_hcd_unlink_urb_from_ep(dwc2_hsotg_to_hcd(hsotg), urb);
+	urb->hcpriv = NULL;
+	kfree(qtd->urb);
+	qtd->urb = NULL;
+
+	usb_hcd_giveback_urb(dwc2_hsotg_to_hcd(hsotg), urb, status);
+}
+
+/*
+ * Work queue function for starting the HCD when A-Cable is connected
+ */
+static void dwc2_hcd_start_func(struct work_struct *work)
+{
+	struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
+						start_work.work);
+
+	dev_dbg(hsotg->dev, "%s() %p\n", __func__, hsotg);
+	dwc2_host_start(hsotg);
+}
+
+/*
+ * Reset work queue function
+ */
+static void dwc2_hcd_reset_func(struct work_struct *work)
+{
+	struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
+						reset_work.work);
+	unsigned long flags;
+	u32 hprt0;
+
+	dev_dbg(hsotg->dev, "USB RESET function called\n");
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	hprt0 = dwc2_read_hprt0(hsotg);
+	hprt0 &= ~HPRT0_RST;
+	dwc2_writel(hsotg, hprt0, HPRT0);
+	hsotg->flags.b.port_reset_change = 1;
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+static void dwc2_hcd_phy_reset_func(struct work_struct *work)
+{
+	struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
+						phy_reset_work);
+	int ret;
+
+	ret = phy_reset(hsotg->phy);
+	if (ret)
+		dev_warn(hsotg->dev, "PHY reset failed\n");
+}
+
+/*
+ * =========================================================================
+ *  Linux HC Driver Functions
+ * =========================================================================
+ */
+
+/*
+ * Initializes the DWC_otg controller and its root hub and prepares it for host
+ * mode operation. Activates the root port. Returns 0 on success and a negative
+ * error code on failure.
+ */
+static int _dwc2_hcd_start(struct usb_hcd *hcd)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	struct usb_bus *bus = hcd_to_bus(hcd);
+	unsigned long flags;
+	u32 hprt0;
+	int ret;
+
+	dev_dbg(hsotg->dev, "DWC OTG HCD START\n");
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	hsotg->lx_state = DWC2_L0;
+	hcd->state = HC_STATE_RUNNING;
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	if (dwc2_is_device_mode(hsotg)) {
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		return 0;	/* why 0 ?? */
+	}
+
+	dwc2_hcd_reinit(hsotg);
+
+	hprt0 = dwc2_read_hprt0(hsotg);
+	/* Has vbus power been turned on in dwc2_core_host_init ? */
+	if (hprt0 & HPRT0_PWR) {
+		/* Enable external vbus supply before resuming root hub */
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		ret = dwc2_vbus_supply_init(hsotg);
+		if (ret)
+			return ret;
+		spin_lock_irqsave(&hsotg->lock, flags);
+	}
+
+	/* Initialize and connect root hub if one is not already attached */
+	if (bus->root_hub) {
+		dev_dbg(hsotg->dev, "DWC OTG HCD Has Root Hub\n");
+		/* Inform the HUB driver to resume */
+		usb_hcd_resume_root_hub(hcd);
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return 0;
+}
+
+/*
+ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
+ * stopped.
+ */
+static void _dwc2_hcd_stop(struct usb_hcd *hcd)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	unsigned long flags;
+	u32 hprt0;
+
+	/* Turn off all host-specific interrupts */
+	dwc2_disable_host_interrupts(hsotg);
+
+	/* Wait for interrupt processing to finish */
+	synchronize_irq(hcd->irq);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	hprt0 = dwc2_read_hprt0(hsotg);
+	/* Ensure hcd is disconnected */
+	dwc2_hcd_disconnect(hsotg, true);
+	dwc2_hcd_stop(hsotg);
+	hsotg->lx_state = DWC2_L3;
+	hcd->state = HC_STATE_HALT;
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	/* keep balanced supply init/exit by checking HPRT0_PWR */
+	if (hprt0 & HPRT0_PWR)
+		dwc2_vbus_supply_exit(hsotg);
+
+	usleep_range(1000, 3000);
+}
+
+static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	if (dwc2_is_device_mode(hsotg))
+		goto unlock;
+
+	if (hsotg->lx_state != DWC2_L0)
+		goto unlock;
+
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		goto unlock;
+
+	if (hsotg->op_state == OTG_STATE_B_PERIPHERAL)
+		goto unlock;
+
+	if (hsotg->bus_suspended)
+		goto skip_power_saving;
+
+	if (hsotg->flags.b.port_connect_status == 0)
+		goto skip_power_saving;
+
+	switch (hsotg->params.power_down) {
+	case DWC2_POWER_DOWN_PARAM_PARTIAL:
+		/* Enter partial_power_down */
+		ret = dwc2_enter_partial_power_down(hsotg);
+		if (ret)
+			dev_err(hsotg->dev,
+				"enter partial_power_down failed\n");
+		/* After entering suspend, hardware is not accessible */
+		clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+		break;
+	case DWC2_POWER_DOWN_PARAM_HIBERNATION:
+		/* Enter hibernation */
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		ret = dwc2_enter_hibernation(hsotg, 1);
+		if (ret)
+			dev_err(hsotg->dev, "enter hibernation failed\n");
+		spin_lock_irqsave(&hsotg->lock, flags);
+
+		/* After entering suspend, hardware is not accessible */
+		clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+		break;
+	case DWC2_POWER_DOWN_PARAM_NONE:
+		/*
+		 * If not hibernation nor partial power down are supported,
+		 * clock gating is used to save power.
+		 */
+		if (!hsotg->params.no_clock_gating) {
+			dwc2_host_enter_clock_gating(hsotg);
+
+			/* After entering suspend, hardware is not accessible */
+			clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+		}
+		break;
+	default:
+		goto skip_power_saving;
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	dwc2_vbus_supply_exit(hsotg);
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	/* Ask phy to be suspended */
+	if (!IS_ERR_OR_NULL(hsotg->uphy)) {
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		usb_phy_set_suspend(hsotg->uphy, true);
+		spin_lock_irqsave(&hsotg->lock, flags);
+	}
+
+skip_power_saving:
+	hsotg->lx_state = DWC2_L2;
+unlock:
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return ret;
+}
+
+static int _dwc2_hcd_resume(struct usb_hcd *hcd)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	unsigned long flags;
+	u32 hprt0;
+	int ret = 0;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	if (dwc2_is_device_mode(hsotg))
+		goto unlock;
+
+	if (hsotg->lx_state != DWC2_L2)
+		goto unlock;
+
+	hprt0 = dwc2_read_hprt0(hsotg);
+
+	/*
+	 * Added port connection status checking which prevents exiting from
+	 * Partial Power Down mode from _dwc2_hcd_resume() if not in Partial
+	 * Power Down mode.
+	 */
+	if (hprt0 & HPRT0_CONNSTS) {
+		hsotg->lx_state = DWC2_L0;
+		goto unlock;
+	}
+
+	switch (hsotg->params.power_down) {
+	case DWC2_POWER_DOWN_PARAM_PARTIAL:
+		ret = dwc2_exit_partial_power_down(hsotg, 0, true);
+		if (ret)
+			dev_err(hsotg->dev,
+				"exit partial_power_down failed\n");
+		/*
+		 * Set HW accessible bit before powering on the controller
+		 * since an interrupt may rise.
+		 */
+		set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+		break;
+	case DWC2_POWER_DOWN_PARAM_HIBERNATION:
+		ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
+		if (ret)
+			dev_err(hsotg->dev, "exit hibernation failed.\n");
+
+		/*
+		 * Set HW accessible bit before powering on the controller
+		 * since an interrupt may rise.
+		 */
+		set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+		break;
+	case DWC2_POWER_DOWN_PARAM_NONE:
+		/*
+		 * If not hibernation nor partial power down are supported,
+		 * port resume is done using the clock gating programming flow.
+		 */
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		dwc2_host_exit_clock_gating(hsotg, 0);
+
+		/*
+		 * Initialize the Core for Host mode, as after system resume
+		 * the global interrupts are disabled.
+		 */
+		dwc2_core_init(hsotg, false);
+		dwc2_enable_global_interrupts(hsotg);
+		dwc2_hcd_reinit(hsotg);
+		spin_lock_irqsave(&hsotg->lock, flags);
+
+		/*
+		 * Set HW accessible bit before powering on the controller
+		 * since an interrupt may rise.
+		 */
+		set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+		break;
+	default:
+		hsotg->lx_state = DWC2_L0;
+		goto unlock;
+	}
+
+	/* Change Root port status, as port status change occurred after resume.*/
+	hsotg->flags.b.port_suspend_change = 1;
+
+	/*
+	 * Enable power if not already done.
+	 * This must not be spinlocked since duration
+	 * of this call is unknown.
+	 */
+	if (!IS_ERR_OR_NULL(hsotg->uphy)) {
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		usb_phy_set_suspend(hsotg->uphy, false);
+		spin_lock_irqsave(&hsotg->lock, flags);
+	}
+
+	/* Enable external vbus supply after resuming the port. */
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	dwc2_vbus_supply_init(hsotg);
+
+	/* Wait for controller to correctly update D+/D- level */
+	usleep_range(3000, 5000);
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	/*
+	 * Clear Port Enable and Port Status changes.
+	 * Enable Port Power.
+	 */
+	dwc2_writel(hsotg, HPRT0_PWR | HPRT0_CONNDET |
+			HPRT0_ENACHG, HPRT0);
+
+	/* Wait for controller to detect Port Connect */
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	usleep_range(5000, 7000);
+	spin_lock_irqsave(&hsotg->lock, flags);
+unlock:
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return ret;
+}
+
+/* Returns the current frame number */
+static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+	return dwc2_hcd_get_frame_number(hsotg);
+}
+
+static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb,
+			       char *fn_name)
+{
+#ifdef VERBOSE_DEBUG
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	char *pipetype = NULL;
+	char *speed = NULL;
+
+	dev_vdbg(hsotg->dev, "%s, urb %p\n", fn_name, urb);
+	dev_vdbg(hsotg->dev, "  Device address: %d\n",
+		 usb_pipedevice(urb->pipe));
+	dev_vdbg(hsotg->dev, "  Endpoint: %d, %s\n",
+		 usb_pipeendpoint(urb->pipe),
+		 usb_pipein(urb->pipe) ? "IN" : "OUT");
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_CONTROL:
+		pipetype = "CONTROL";
+		break;
+	case PIPE_BULK:
+		pipetype = "BULK";
+		break;
+	case PIPE_INTERRUPT:
+		pipetype = "INTERRUPT";
+		break;
+	case PIPE_ISOCHRONOUS:
+		pipetype = "ISOCHRONOUS";
+		break;
+	}
+
+	dev_vdbg(hsotg->dev, "  Endpoint type: %s %s (%s)\n", pipetype,
+		 usb_urb_dir_in(urb) ? "IN" : "OUT", usb_pipein(urb->pipe) ?
+		 "IN" : "OUT");
+
+	switch (urb->dev->speed) {
+	case USB_SPEED_HIGH:
+		speed = "HIGH";
+		break;
+	case USB_SPEED_FULL:
+		speed = "FULL";
+		break;
+	case USB_SPEED_LOW:
+		speed = "LOW";
+		break;
+	default:
+		speed = "UNKNOWN";
+		break;
+	}
+
+	dev_vdbg(hsotg->dev, "  Speed: %s\n", speed);
+	dev_vdbg(hsotg->dev, "  Max packet size: %d (%d mult)\n",
+		 usb_endpoint_maxp(&urb->ep->desc),
+		 usb_endpoint_maxp_mult(&urb->ep->desc));
+
+	dev_vdbg(hsotg->dev, "  Data buffer length: %d\n",
+		 urb->transfer_buffer_length);
+	dev_vdbg(hsotg->dev, "  Transfer buffer: %p, Transfer DMA: %08lx\n",
+		 urb->transfer_buffer, (unsigned long)urb->transfer_dma);
+	dev_vdbg(hsotg->dev, "  Setup buffer: %p, Setup DMA: %08lx\n",
+		 urb->setup_packet, (unsigned long)urb->setup_dma);
+	dev_vdbg(hsotg->dev, "  Interval: %d\n", urb->interval);
+
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+		int i;
+
+		for (i = 0; i < urb->number_of_packets; i++) {
+			dev_vdbg(hsotg->dev, "  ISO Desc %d:\n", i);
+			dev_vdbg(hsotg->dev, "    offset: %d, length %d\n",
+				 urb->iso_frame_desc[i].offset,
+				 urb->iso_frame_desc[i].length);
+		}
+	}
+#endif
+}
+
+/*
+ * Starts processing a USB transfer request specified by a USB Request Block
+ * (URB). mem_flags indicates the type of memory allocation to use while
+ * processing this URB.
+ */
+static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+				 gfp_t mem_flags)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	struct usb_host_endpoint *ep = urb->ep;
+	struct dwc2_hcd_urb *dwc2_urb;
+	int i;
+	int retval;
+	int alloc_bandwidth = 0;
+	u8 ep_type = 0;
+	u32 tflags = 0;
+	void *buf;
+	unsigned long flags;
+	struct dwc2_qh *qh;
+	bool qh_allocated = false;
+	struct dwc2_qtd *qtd;
+	struct dwc2_gregs_backup *gr;
+
+	gr = &hsotg->gr_backup;
+
+	if (dbg_urb(urb)) {
+		dev_vdbg(hsotg->dev, "DWC OTG HCD URB Enqueue\n");
+		dwc2_dump_urb_info(hcd, urb, "urb_enqueue");
+	}
+
+	if (hsotg->hibernated) {
+		if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
+			retval = dwc2_exit_hibernation(hsotg, 0, 0, 1);
+		else
+			retval = dwc2_exit_hibernation(hsotg, 0, 0, 0);
+
+		if (retval)
+			dev_err(hsotg->dev,
+				"exit hibernation failed.\n");
+	}
+
+	if (hsotg->in_ppd) {
+		retval = dwc2_exit_partial_power_down(hsotg, 0, true);
+		if (retval)
+			dev_err(hsotg->dev,
+				"exit partial_power_down failed\n");
+	}
+
+	if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE &&
+	    hsotg->bus_suspended) {
+		if (dwc2_is_device_mode(hsotg))
+			dwc2_gadget_exit_clock_gating(hsotg, 0);
+		else
+			dwc2_host_exit_clock_gating(hsotg, 0);
+	}
+
+	if (!ep)
+		return -EINVAL;
+
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS ||
+	    usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
+		spin_lock_irqsave(&hsotg->lock, flags);
+		if (!dwc2_hcd_is_bandwidth_allocated(hsotg, ep))
+			alloc_bandwidth = 1;
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+	}
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_CONTROL:
+		ep_type = USB_ENDPOINT_XFER_CONTROL;
+		break;
+	case PIPE_ISOCHRONOUS:
+		ep_type = USB_ENDPOINT_XFER_ISOC;
+		break;
+	case PIPE_BULK:
+		ep_type = USB_ENDPOINT_XFER_BULK;
+		break;
+	case PIPE_INTERRUPT:
+		ep_type = USB_ENDPOINT_XFER_INT;
+		break;
+	}
+
+	dwc2_urb = dwc2_hcd_urb_alloc(hsotg, urb->number_of_packets,
+				      mem_flags);
+	if (!dwc2_urb)
+		return -ENOMEM;
+
+	dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe),
+				  usb_pipeendpoint(urb->pipe), ep_type,
+				  usb_pipein(urb->pipe),
+				  usb_endpoint_maxp(&ep->desc),
+				  usb_endpoint_maxp_mult(&ep->desc));
+
+	buf = urb->transfer_buffer;
+
+	if (hcd_uses_dma(hcd)) {
+		if (!buf && (urb->transfer_dma & 3)) {
+			dev_err(hsotg->dev,
+				"%s: unaligned transfer with no transfer_buffer",
+				__func__);
+			retval = -EINVAL;
+			goto fail0;
+		}
+	}
+
+	if (!(urb->transfer_flags & URB_NO_INTERRUPT))
+		tflags |= URB_GIVEBACK_ASAP;
+	if (urb->transfer_flags & URB_ZERO_PACKET)
+		tflags |= URB_SEND_ZERO_PACKET;
+
+	dwc2_urb->priv = urb;
+	dwc2_urb->buf = buf;
+	dwc2_urb->dma = urb->transfer_dma;
+	dwc2_urb->length = urb->transfer_buffer_length;
+	dwc2_urb->setup_packet = urb->setup_packet;
+	dwc2_urb->setup_dma = urb->setup_dma;
+	dwc2_urb->flags = tflags;
+	dwc2_urb->interval = urb->interval;
+	dwc2_urb->status = -EINPROGRESS;
+
+	for (i = 0; i < urb->number_of_packets; ++i)
+		dwc2_hcd_urb_set_iso_desc_params(dwc2_urb, i,
+						 urb->iso_frame_desc[i].offset,
+						 urb->iso_frame_desc[i].length);
+
+	urb->hcpriv = dwc2_urb;
+	qh = (struct dwc2_qh *)ep->hcpriv;
+	/* Create QH for the endpoint if it doesn't exist */
+	if (!qh) {
+		qh = dwc2_hcd_qh_create(hsotg, dwc2_urb, mem_flags);
+		if (!qh) {
+			retval = -ENOMEM;
+			goto fail0;
+		}
+		ep->hcpriv = qh;
+		qh_allocated = true;
+	}
+
+	qtd = kzalloc(sizeof(*qtd), mem_flags);
+	if (!qtd) {
+		retval = -ENOMEM;
+		goto fail1;
+	}
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	retval = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (retval)
+		goto fail2;
+
+	retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, qh, qtd);
+	if (retval)
+		goto fail3;
+
+	if (alloc_bandwidth) {
+		dwc2_allocate_bus_bandwidth(hcd,
+				dwc2_hcd_get_ep_bandwidth(hsotg, ep),
+				urb);
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return 0;
+
+fail3:
+	dwc2_urb->priv = NULL;
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+	if (qh_allocated && qh->channel && qh->channel->qh == qh)
+		qh->channel->qh = NULL;
+fail2:
+	urb->hcpriv = NULL;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	kfree(qtd);
+fail1:
+	if (qh_allocated) {
+		struct dwc2_qtd *qtd2, *qtd2_tmp;
+
+		ep->hcpriv = NULL;
+		dwc2_hcd_qh_unlink(hsotg, qh);
+		/* Free each QTD in the QH's QTD list */
+		list_for_each_entry_safe(qtd2, qtd2_tmp, &qh->qtd_list,
+					 qtd_list_entry)
+			dwc2_hcd_qtd_unlink_and_free(hsotg, qtd2, qh);
+		dwc2_hcd_qh_free(hsotg, qh);
+	}
+fail0:
+	kfree(dwc2_urb);
+
+	return retval;
+}
+
+/*
+ * Aborts/cancels a USB transfer request. Always returns 0 to indicate success.
+ */
+static int _dwc2_hcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+				 int status)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	int rc;
+	unsigned long flags;
+
+	dev_dbg(hsotg->dev, "DWC OTG HCD URB Dequeue\n");
+	dwc2_dump_urb_info(hcd, urb, "urb_dequeue");
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (rc)
+		goto out;
+
+	if (!urb->hcpriv) {
+		dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n");
+		goto out;
+	}
+
+	rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv);
+
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+	kfree(urb->hcpriv);
+	urb->hcpriv = NULL;
+
+	/* Higher layer software sets URB status */
+	spin_unlock(&hsotg->lock);
+	usb_hcd_giveback_urb(hcd, urb, status);
+	spin_lock(&hsotg->lock);
+
+	dev_dbg(hsotg->dev, "Called usb_hcd_giveback_urb()\n");
+	dev_dbg(hsotg->dev, "  urb->status = %d\n", urb->status);
+out:
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return rc;
+}
+
+/*
+ * Frees resources in the DWC_otg controller related to a given endpoint. Also
+ * clears state in the HCD related to the endpoint. Any URBs for the endpoint
+ * must already be dequeued.
+ */
+static void _dwc2_hcd_endpoint_disable(struct usb_hcd *hcd,
+				       struct usb_host_endpoint *ep)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+	dev_dbg(hsotg->dev,
+		"DWC OTG HCD EP DISABLE: bEndpointAddress=0x%02x, ep->hcpriv=%p\n",
+		ep->desc.bEndpointAddress, ep->hcpriv);
+	dwc2_hcd_endpoint_disable(hsotg, ep, 250);
+}
+
+/*
+ * Resets endpoint specific parameter values, in current version used to reset
+ * the data toggle (as a WA). This function can be called from usb_clear_halt
+ * routine.
+ */
+static void _dwc2_hcd_endpoint_reset(struct usb_hcd *hcd,
+				     struct usb_host_endpoint *ep)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	unsigned long flags;
+
+	dev_dbg(hsotg->dev,
+		"DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n",
+		ep->desc.bEndpointAddress);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	dwc2_hcd_endpoint_reset(hsotg, ep);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+/*
+ * Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
+ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
+ * interrupt.
+ *
+ * This function is called by the USB core when an interrupt occurs
+ */
+static irqreturn_t _dwc2_hcd_irq(struct usb_hcd *hcd)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+	return dwc2_handle_hcd_intr(hsotg);
+}
+
+/*
+ * Creates Status Change bitmap for the root hub and root port. The bitmap is
+ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
+ * is the status change indicator for the single root port. Returns 1 if either
+ * change indicator is 1, otherwise returns 0.
+ */
+static int _dwc2_hcd_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+	buf[0] = dwc2_hcd_is_status_changed(hsotg, 1) << 1;
+	return buf[0] != 0;
+}
+
+/* Handles hub class-specific requests */
+static int _dwc2_hcd_hub_control(struct usb_hcd *hcd, u16 typereq, u16 wvalue,
+				 u16 windex, char *buf, u16 wlength)
+{
+	int retval = dwc2_hcd_hub_control(dwc2_hcd_to_hsotg(hcd), typereq,
+					  wvalue, windex, buf, wlength);
+	return retval;
+}
+
+/* Handles hub TT buffer clear completions */
+static void _dwc2_hcd_clear_tt_buffer_complete(struct usb_hcd *hcd,
+					       struct usb_host_endpoint *ep)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	struct dwc2_qh *qh;
+	unsigned long flags;
+
+	qh = ep->hcpriv;
+	if (!qh)
+		return;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	qh->tt_buffer_dirty = 0;
+
+	if (hsotg->flags.b.port_connect_status)
+		dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_ALL);
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+/*
+ * HPRT0_SPD_HIGH_SPEED: high speed
+ * HPRT0_SPD_FULL_SPEED: full speed
+ */
+static void dwc2_change_bus_speed(struct usb_hcd *hcd, int speed)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+	if (hsotg->params.speed == speed)
+		return;
+
+	hsotg->params.speed = speed;
+	queue_work(hsotg->wq_otg, &hsotg->wf_otg);
+}
+
+static void dwc2_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+	if (!hsotg->params.change_speed_quirk)
+		return;
+
+	/*
+	 * On removal, set speed to default high-speed.
+	 */
+	if (udev->parent && udev->parent->speed > USB_SPEED_UNKNOWN &&
+	    udev->parent->speed < USB_SPEED_HIGH) {
+		dev_info(hsotg->dev, "Set speed to default high-speed\n");
+		dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED);
+	}
+}
+
+static int dwc2_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+	if (!hsotg->params.change_speed_quirk)
+		return 0;
+
+	if (udev->speed == USB_SPEED_HIGH) {
+		dev_info(hsotg->dev, "Set speed to high-speed\n");
+		dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED);
+	} else if ((udev->speed == USB_SPEED_FULL ||
+				udev->speed == USB_SPEED_LOW)) {
+		/*
+		 * Change speed setting to full-speed if there's
+		 * a full-speed or low-speed device plugged in.
+		 */
+		dev_info(hsotg->dev, "Set speed to full-speed\n");
+		dwc2_change_bus_speed(hcd, HPRT0_SPD_FULL_SPEED);
+	}
+
+	return 0;
+}
+
+static struct hc_driver dwc2_hc_driver = {
+	.description = "dwc2_hsotg",
+	.product_desc = "DWC OTG Controller",
+	.hcd_priv_size = sizeof(struct wrapper_priv_data),
+
+	.irq = _dwc2_hcd_irq,
+	.flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+
+	.start = _dwc2_hcd_start,
+	.stop = _dwc2_hcd_stop,
+	.urb_enqueue = _dwc2_hcd_urb_enqueue,
+	.urb_dequeue = _dwc2_hcd_urb_dequeue,
+	.endpoint_disable = _dwc2_hcd_endpoint_disable,
+	.endpoint_reset = _dwc2_hcd_endpoint_reset,
+	.get_frame_number = _dwc2_hcd_get_frame_number,
+
+	.hub_status_data = _dwc2_hcd_hub_status_data,
+	.hub_control = _dwc2_hcd_hub_control,
+	.clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete,
+
+	.bus_suspend = _dwc2_hcd_suspend,
+	.bus_resume = _dwc2_hcd_resume,
+
+	.map_urb_for_dma	= dwc2_map_urb_for_dma,
+	.unmap_urb_for_dma	= dwc2_unmap_urb_for_dma,
+};
+
+/*
+ * Frees secondary storage associated with the dwc2_hsotg structure contained
+ * in the struct usb_hcd field
+ */
+static void dwc2_hcd_free(struct dwc2_hsotg *hsotg)
+{
+	u32 ahbcfg;
+	u32 dctl;
+	int i;
+
+	dev_dbg(hsotg->dev, "DWC OTG HCD FREE\n");
+
+	/* Free memory for QH/QTD lists */
+	dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_inactive);
+	dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_waiting);
+	dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_active);
+	dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_inactive);
+	dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_ready);
+	dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_assigned);
+	dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_queued);
+
+	/* Free memory for the host channels */
+	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
+		struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i];
+
+		if (chan) {
+			dev_dbg(hsotg->dev, "HCD Free channel #%i, chan=%p\n",
+				i, chan);
+			hsotg->hc_ptr_array[i] = NULL;
+			kfree(chan);
+		}
+	}
+
+	if (hsotg->params.host_dma) {
+		if (hsotg->status_buf) {
+			dma_free_coherent(hsotg->dev, DWC2_HCD_STATUS_BUF_SIZE,
+					  hsotg->status_buf,
+					  hsotg->status_buf_dma);
+			hsotg->status_buf = NULL;
+		}
+	} else {
+		kfree(hsotg->status_buf);
+		hsotg->status_buf = NULL;
+	}
+
+	ahbcfg = dwc2_readl(hsotg, GAHBCFG);
+
+	/* Disable all interrupts */
+	ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
+	dwc2_writel(hsotg, ahbcfg, GAHBCFG);
+	dwc2_writel(hsotg, 0, GINTMSK);
+
+	if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) {
+		dctl = dwc2_readl(hsotg, DCTL);
+		dctl |= DCTL_SFTDISCON;
+		dwc2_writel(hsotg, dctl, DCTL);
+	}
+
+	if (hsotg->wq_otg) {
+		if (!cancel_work_sync(&hsotg->wf_otg))
+			flush_workqueue(hsotg->wq_otg);
+		destroy_workqueue(hsotg->wq_otg);
+	}
+
+	cancel_work_sync(&hsotg->phy_reset_work);
+
+	del_timer(&hsotg->wkp_timer);
+}
+
+static void dwc2_hcd_release(struct dwc2_hsotg *hsotg)
+{
+	/* Turn off all host-specific interrupts */
+	dwc2_disable_host_interrupts(hsotg);
+
+	dwc2_hcd_free(hsotg);
+}
+
+/*
+ * Initializes the HCD. This function allocates memory for and initializes the
+ * static parts of the usb_hcd and dwc2_hsotg structures. It also registers the
+ * USB bus with the core and calls the hc_driver->start() function. It returns
+ * a negative error on failure.
+ */
+int dwc2_hcd_init(struct dwc2_hsotg *hsotg)
+{
+	struct platform_device *pdev = to_platform_device(hsotg->dev);
+	struct resource *res;
+	struct usb_hcd *hcd;
+	struct dwc2_host_chan *channel;
+	u32 hcfg;
+	int i, num_channels;
+	int retval;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n");
+
+	retval = -ENOMEM;
+
+	hcfg = dwc2_readl(hsotg, HCFG);
+	dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg);
+
+#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
+	hsotg->frame_num_array = kcalloc(FRAME_NUM_ARRAY_SIZE,
+					 sizeof(*hsotg->frame_num_array),
+					 GFP_KERNEL);
+	if (!hsotg->frame_num_array)
+		goto error1;
+	hsotg->last_frame_num_array =
+		kcalloc(FRAME_NUM_ARRAY_SIZE,
+			sizeof(*hsotg->last_frame_num_array), GFP_KERNEL);
+	if (!hsotg->last_frame_num_array)
+		goto error1;
+#endif
+	hsotg->last_frame_num = HFNUM_MAX_FRNUM;
+
+	/* Check if the bus driver or platform code has setup a dma_mask */
+	if (hsotg->params.host_dma &&
+	    !hsotg->dev->dma_mask) {
+		dev_warn(hsotg->dev,
+			 "dma_mask not set, disabling DMA\n");
+		hsotg->params.host_dma = false;
+		hsotg->params.dma_desc_enable = false;
+	}
+
+	/* Set device flags indicating whether the HCD supports DMA */
+	if (hsotg->params.host_dma) {
+		if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0)
+			dev_warn(hsotg->dev, "can't set DMA mask\n");
+		if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0)
+			dev_warn(hsotg->dev, "can't set coherent DMA mask\n");
+	}
+
+	if (hsotg->params.change_speed_quirk) {
+		dwc2_hc_driver.free_dev = dwc2_free_dev;
+		dwc2_hc_driver.reset_device = dwc2_reset_device;
+	}
+
+	if (hsotg->params.host_dma)
+		dwc2_hc_driver.flags |= HCD_DMA;
+
+	hcd = usb_create_hcd(&dwc2_hc_driver, hsotg->dev, dev_name(hsotg->dev));
+	if (!hcd)
+		goto error1;
+
+	hcd->has_tt = 1;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		retval = -EINVAL;
+		goto error2;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	((struct wrapper_priv_data *)&hcd->hcd_priv)->hsotg = hsotg;
+	hsotg->priv = hcd;
+
+	/*
+	 * Disable the global interrupt until all the interrupt handlers are
+	 * installed
+	 */
+	dwc2_disable_global_interrupts(hsotg);
+
+	/* Initialize the DWC_otg core, and select the Phy type */
+	retval = dwc2_core_init(hsotg, true);
+	if (retval)
+		goto error2;
+
+	/* Create new workqueue and init work */
+	retval = -ENOMEM;
+	hsotg->wq_otg = alloc_ordered_workqueue("dwc2", 0);
+	if (!hsotg->wq_otg) {
+		dev_err(hsotg->dev, "Failed to create workqueue\n");
+		goto error2;
+	}
+	INIT_WORK(&hsotg->wf_otg, dwc2_conn_id_status_change);
+
+	timer_setup(&hsotg->wkp_timer, dwc2_wakeup_detected, 0);
+
+	/* Initialize the non-periodic schedule */
+	INIT_LIST_HEAD(&hsotg->non_periodic_sched_inactive);
+	INIT_LIST_HEAD(&hsotg->non_periodic_sched_waiting);
+	INIT_LIST_HEAD(&hsotg->non_periodic_sched_active);
+
+	/* Initialize the periodic schedule */
+	INIT_LIST_HEAD(&hsotg->periodic_sched_inactive);
+	INIT_LIST_HEAD(&hsotg->periodic_sched_ready);
+	INIT_LIST_HEAD(&hsotg->periodic_sched_assigned);
+	INIT_LIST_HEAD(&hsotg->periodic_sched_queued);
+
+	INIT_LIST_HEAD(&hsotg->split_order);
+
+	/*
+	 * Create a host channel descriptor for each host channel implemented
+	 * in the controller. Initialize the channel descriptor array.
+	 */
+	INIT_LIST_HEAD(&hsotg->free_hc_list);
+	num_channels = hsotg->params.host_channels;
+	memset(&hsotg->hc_ptr_array[0], 0, sizeof(hsotg->hc_ptr_array));
+
+	for (i = 0; i < num_channels; i++) {
+		channel = kzalloc(sizeof(*channel), GFP_KERNEL);
+		if (!channel)
+			goto error3;
+		channel->hc_num = i;
+		INIT_LIST_HEAD(&channel->split_order_list_entry);
+		hsotg->hc_ptr_array[i] = channel;
+	}
+
+	/* Initialize work */
+	INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func);
+	INIT_DELAYED_WORK(&hsotg->reset_work, dwc2_hcd_reset_func);
+	INIT_WORK(&hsotg->phy_reset_work, dwc2_hcd_phy_reset_func);
+
+	/*
+	 * Allocate space for storing data on status transactions. Normally no
+	 * data is sent, but this space acts as a bit bucket. This must be
+	 * done after usb_add_hcd since that function allocates the DMA buffer
+	 * pool.
+	 */
+	if (hsotg->params.host_dma)
+		hsotg->status_buf = dma_alloc_coherent(hsotg->dev,
+					DWC2_HCD_STATUS_BUF_SIZE,
+					&hsotg->status_buf_dma, GFP_KERNEL);
+	else
+		hsotg->status_buf = kzalloc(DWC2_HCD_STATUS_BUF_SIZE,
+					  GFP_KERNEL);
+
+	if (!hsotg->status_buf)
+		goto error3;
+
+	/*
+	 * Create kmem caches to handle descriptor buffers in descriptor
+	 * DMA mode.
+	 * Alignment must be set to 512 bytes.
+	 */
+	if (hsotg->params.dma_desc_enable ||
+	    hsotg->params.dma_desc_fs_enable) {
+		hsotg->desc_gen_cache = kmem_cache_create("dwc2-gen-desc",
+				sizeof(struct dwc2_dma_desc) *
+				MAX_DMA_DESC_NUM_GENERIC, 512, SLAB_CACHE_DMA,
+				NULL);
+		if (!hsotg->desc_gen_cache) {
+			dev_err(hsotg->dev,
+				"unable to create dwc2 generic desc cache\n");
+
+			/*
+			 * Disable descriptor dma mode since it will not be
+			 * usable.
+			 */
+			hsotg->params.dma_desc_enable = false;
+			hsotg->params.dma_desc_fs_enable = false;
+		}
+
+		hsotg->desc_hsisoc_cache = kmem_cache_create("dwc2-hsisoc-desc",
+				sizeof(struct dwc2_dma_desc) *
+				MAX_DMA_DESC_NUM_HS_ISOC, 512, 0, NULL);
+		if (!hsotg->desc_hsisoc_cache) {
+			dev_err(hsotg->dev,
+				"unable to create dwc2 hs isoc desc cache\n");
+
+			kmem_cache_destroy(hsotg->desc_gen_cache);
+
+			/*
+			 * Disable descriptor dma mode since it will not be
+			 * usable.
+			 */
+			hsotg->params.dma_desc_enable = false;
+			hsotg->params.dma_desc_fs_enable = false;
+		}
+	}
+
+	if (hsotg->params.host_dma) {
+		/*
+		 * Create kmem caches to handle non-aligned buffer
+		 * in Buffer DMA mode.
+		 */
+		hsotg->unaligned_cache = kmem_cache_create("dwc2-unaligned-dma",
+						DWC2_KMEM_UNALIGNED_BUF_SIZE, 4,
+						SLAB_CACHE_DMA, NULL);
+		if (!hsotg->unaligned_cache)
+			dev_err(hsotg->dev,
+				"unable to create dwc2 unaligned cache\n");
+	}
+
+	hsotg->otg_port = 1;
+	hsotg->frame_list = NULL;
+	hsotg->frame_list_dma = 0;
+	hsotg->periodic_qh_count = 0;
+
+	/* Initiate lx_state to L3 disconnected state */
+	hsotg->lx_state = DWC2_L3;
+
+	hcd->self.otg_port = hsotg->otg_port;
+
+	/* Don't support SG list at this point */
+	hcd->self.sg_tablesize = 0;
+
+	hcd->tpl_support = of_usb_host_tpl_support(hsotg->dev->of_node);
+
+	if (!IS_ERR_OR_NULL(hsotg->uphy))
+		otg_set_host(hsotg->uphy->otg, &hcd->self);
+
+	/*
+	 * Finish generic HCD initialization and start the HCD. This function
+	 * allocates the DMA buffer pool, registers the USB bus, requests the
+	 * IRQ line, and calls hcd_start method.
+	 */
+	retval = usb_add_hcd(hcd, hsotg->irq, IRQF_SHARED);
+	if (retval < 0)
+		goto error4;
+
+	device_wakeup_enable(hcd->self.controller);
+
+	dwc2_hcd_dump_state(hsotg);
+
+	dwc2_enable_global_interrupts(hsotg);
+
+	return 0;
+
+error4:
+	kmem_cache_destroy(hsotg->unaligned_cache);
+	kmem_cache_destroy(hsotg->desc_hsisoc_cache);
+	kmem_cache_destroy(hsotg->desc_gen_cache);
+error3:
+	dwc2_hcd_release(hsotg);
+error2:
+	usb_put_hcd(hcd);
+error1:
+
+#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
+	kfree(hsotg->last_frame_num_array);
+	kfree(hsotg->frame_num_array);
+#endif
+
+	dev_err(hsotg->dev, "%s() FAILED, returning %d\n", __func__, retval);
+	return retval;
+}
+
+/*
+ * Removes the HCD.
+ * Frees memory and resources associated with the HCD and deregisters the bus.
+ */
+void dwc2_hcd_remove(struct dwc2_hsotg *hsotg)
+{
+	struct usb_hcd *hcd;
+
+	dev_dbg(hsotg->dev, "DWC OTG HCD REMOVE\n");
+
+	hcd = dwc2_hsotg_to_hcd(hsotg);
+	dev_dbg(hsotg->dev, "hsotg->hcd = %p\n", hcd);
+
+	if (!hcd) {
+		dev_dbg(hsotg->dev, "%s: dwc2_hsotg_to_hcd(hsotg) NULL!\n",
+			__func__);
+		return;
+	}
+
+	if (!IS_ERR_OR_NULL(hsotg->uphy))
+		otg_set_host(hsotg->uphy->otg, NULL);
+
+	usb_remove_hcd(hcd);
+	hsotg->priv = NULL;
+
+	kmem_cache_destroy(hsotg->unaligned_cache);
+	kmem_cache_destroy(hsotg->desc_hsisoc_cache);
+	kmem_cache_destroy(hsotg->desc_gen_cache);
+
+	dwc2_hcd_release(hsotg);
+	usb_put_hcd(hcd);
+
+#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
+	kfree(hsotg->last_frame_num_array);
+	kfree(hsotg->frame_num_array);
+#endif
+}
+
+/**
+ * dwc2_backup_host_registers() - Backup controller host registers.
+ * When suspending usb bus, registers needs to be backuped
+ * if controller power is disabled once suspended.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hregs_backup *hr;
+	int i;
+
+	dev_dbg(hsotg->dev, "%s\n", __func__);
+
+	/* Backup Host regs */
+	hr = &hsotg->hr_backup;
+	hr->hcfg = dwc2_readl(hsotg, HCFG);
+	hr->haintmsk = dwc2_readl(hsotg, HAINTMSK);
+	for (i = 0; i < hsotg->params.host_channels; ++i)
+		hr->hcintmsk[i] = dwc2_readl(hsotg, HCINTMSK(i));
+
+	hr->hprt0 = dwc2_read_hprt0(hsotg);
+	hr->hfir = dwc2_readl(hsotg, HFIR);
+	hr->hptxfsiz = dwc2_readl(hsotg, HPTXFSIZ);
+	hr->valid = true;
+
+	return 0;
+}
+
+/**
+ * dwc2_restore_host_registers() - Restore controller host registers.
+ * When resuming usb bus, device registers needs to be restored
+ * if controller power were disabled.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hregs_backup *hr;
+	int i;
+
+	dev_dbg(hsotg->dev, "%s\n", __func__);
+
+	/* Restore host regs */
+	hr = &hsotg->hr_backup;
+	if (!hr->valid) {
+		dev_err(hsotg->dev, "%s: no host registers to restore\n",
+			__func__);
+		return -EINVAL;
+	}
+	hr->valid = false;
+
+	dwc2_writel(hsotg, hr->hcfg, HCFG);
+	dwc2_writel(hsotg, hr->haintmsk, HAINTMSK);
+
+	for (i = 0; i < hsotg->params.host_channels; ++i)
+		dwc2_writel(hsotg, hr->hcintmsk[i], HCINTMSK(i));
+
+	dwc2_writel(hsotg, hr->hprt0, HPRT0);
+	dwc2_writel(hsotg, hr->hfir, HFIR);
+	dwc2_writel(hsotg, hr->hptxfsiz, HPTXFSIZ);
+	hsotg->frame_number = 0;
+
+	return 0;
+}
+
+/**
+ * dwc2_host_enter_hibernation() - Put controller in Hibernation.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg)
+{
+	unsigned long flags;
+	int ret = 0;
+	u32 hprt0;
+	u32 pcgcctl;
+	u32 gusbcfg;
+	u32 gpwrdn;
+
+	dev_dbg(hsotg->dev, "Preparing host for hibernation\n");
+	ret = dwc2_backup_global_registers(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to backup global registers\n",
+			__func__);
+		return ret;
+	}
+	ret = dwc2_backup_host_registers(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to backup host registers\n",
+			__func__);
+		return ret;
+	}
+
+	/* Enter USB Suspend Mode */
+	hprt0 = dwc2_readl(hsotg, HPRT0);
+	hprt0 |= HPRT0_SUSP;
+	hprt0 &= ~HPRT0_ENA;
+	dwc2_writel(hsotg, hprt0, HPRT0);
+
+	/* Wait for the HPRT0.PrtSusp register field to be set */
+	if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 5000))
+		dev_warn(hsotg->dev, "Suspend wasn't generated\n");
+
+	/*
+	 * We need to disable interrupts to prevent servicing of any IRQ
+	 * during going to hibernation
+	 */
+	spin_lock_irqsave(&hsotg->lock, flags);
+	hsotg->lx_state = DWC2_L2;
+
+	gusbcfg = dwc2_readl(hsotg, GUSBCFG);
+	if (gusbcfg & GUSBCFG_ULPI_UTMI_SEL) {
+		/* ULPI interface */
+		/* Suspend the Phy Clock */
+		pcgcctl = dwc2_readl(hsotg, PCGCTL);
+		pcgcctl |= PCGCTL_STOPPCLK;
+		dwc2_writel(hsotg, pcgcctl, PCGCTL);
+		udelay(10);
+
+		gpwrdn = dwc2_readl(hsotg, GPWRDN);
+		gpwrdn |= GPWRDN_PMUACTV;
+		dwc2_writel(hsotg, gpwrdn, GPWRDN);
+		udelay(10);
+	} else {
+		/* UTMI+ Interface */
+		gpwrdn = dwc2_readl(hsotg, GPWRDN);
+		gpwrdn |= GPWRDN_PMUACTV;
+		dwc2_writel(hsotg, gpwrdn, GPWRDN);
+		udelay(10);
+
+		pcgcctl = dwc2_readl(hsotg, PCGCTL);
+		pcgcctl |= PCGCTL_STOPPCLK;
+		dwc2_writel(hsotg, pcgcctl, PCGCTL);
+		udelay(10);
+	}
+
+	/* Enable interrupts from wake up logic */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn |= GPWRDN_PMUINTSEL;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Unmask host mode interrupts in GPWRDN */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn |= GPWRDN_DISCONN_DET_MSK;
+	gpwrdn |= GPWRDN_LNSTSCHG_MSK;
+	gpwrdn |= GPWRDN_STS_CHGINT_MSK;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Enable Power Down Clamp */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn |= GPWRDN_PWRDNCLMP;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Switch off VDD */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn |= GPWRDN_PWRDNSWTCH;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+
+	hsotg->hibernated = 1;
+	hsotg->bus_suspended = 1;
+	dev_dbg(hsotg->dev, "Host hibernation completed\n");
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	return ret;
+}
+
+/*
+ * dwc2_host_exit_hibernation()
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @rem_wakeup: indicates whether resume is initiated by Device or Host.
+ * @param reset: indicates whether resume is initiated by Reset.
+ *
+ * Return: non-zero if failed to enter to hibernation.
+ *
+ * This function is for exiting from Host mode hibernation by
+ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup.
+ */
+int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
+			       int reset)
+{
+	u32 gpwrdn;
+	u32 hprt0;
+	int ret = 0;
+	struct dwc2_gregs_backup *gr;
+	struct dwc2_hregs_backup *hr;
+
+	gr = &hsotg->gr_backup;
+	hr = &hsotg->hr_backup;
+
+	dev_dbg(hsotg->dev,
+		"%s: called with rem_wakeup = %d reset = %d\n",
+		__func__, rem_wakeup, reset);
+
+	dwc2_hib_restore_common(hsotg, rem_wakeup, 1);
+	hsotg->hibernated = 0;
+
+	/*
+	 * This step is not described in functional spec but if not wait for
+	 * this delay, mismatch interrupts occurred because just after restore
+	 * core is in Device mode(gintsts.curmode == 0)
+	 */
+	mdelay(100);
+
+	/* Clear all pending interupts */
+	dwc2_writel(hsotg, 0xffffffff, GINTSTS);
+
+	/* De-assert Restore */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn &= ~GPWRDN_RESTORE;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Restore GUSBCFG, HCFG */
+	dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
+	dwc2_writel(hsotg, hr->hcfg, HCFG);
+
+	/* De-assert Wakeup Logic */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn &= ~GPWRDN_PMUACTV;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	hprt0 = hr->hprt0;
+	hprt0 |= HPRT0_PWR;
+	hprt0 &= ~HPRT0_ENA;
+	hprt0 &= ~HPRT0_SUSP;
+	dwc2_writel(hsotg, hprt0, HPRT0);
+
+	hprt0 = hr->hprt0;
+	hprt0 |= HPRT0_PWR;
+	hprt0 &= ~HPRT0_ENA;
+	hprt0 &= ~HPRT0_SUSP;
+
+	if (reset) {
+		hprt0 |= HPRT0_RST;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+
+		/* Wait for Resume time and then program HPRT again */
+		mdelay(60);
+		hprt0 &= ~HPRT0_RST;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+	} else {
+		hprt0 |= HPRT0_RES;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+
+		/* Wait for Resume time and then program HPRT again */
+		mdelay(100);
+		hprt0 &= ~HPRT0_RES;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+	}
+	/* Clear all interrupt status */
+	hprt0 = dwc2_readl(hsotg, HPRT0);
+	hprt0 |= HPRT0_CONNDET;
+	hprt0 |= HPRT0_ENACHG;
+	hprt0 &= ~HPRT0_ENA;
+	dwc2_writel(hsotg, hprt0, HPRT0);
+
+	hprt0 = dwc2_readl(hsotg, HPRT0);
+
+	/* Clear all pending interupts */
+	dwc2_writel(hsotg, 0xffffffff, GINTSTS);
+
+	/* Restore global registers */
+	ret = dwc2_restore_global_registers(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to restore registers\n",
+			__func__);
+		return ret;
+	}
+
+	/* Restore host registers */
+	ret = dwc2_restore_host_registers(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to restore host registers\n",
+			__func__);
+		return ret;
+	}
+
+	if (rem_wakeup) {
+		dwc2_hcd_rem_wakeup(hsotg);
+		/*
+		 * Change "port_connect_status_change" flag to re-enumerate,
+		 * because after exit from hibernation port connection status
+		 * is not detected.
+		 */
+		hsotg->flags.b.port_connect_status_change = 1;
+	}
+
+	hsotg->hibernated = 0;
+	hsotg->bus_suspended = 0;
+	hsotg->lx_state = DWC2_L0;
+	dev_dbg(hsotg->dev, "Host hibernation restore complete\n");
+	return ret;
+}
+
+bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2)
+{
+	struct usb_device *root_hub = dwc2_hsotg_to_hcd(dwc2)->self.root_hub;
+
+	/* If the controller isn't allowed to wakeup then we can power off. */
+	if (!device_may_wakeup(dwc2->dev))
+		return true;
+
+	/*
+	 * We don't want to power off the PHY if something under the
+	 * root hub has wakeup enabled.
+	 */
+	if (usb_wakeup_enabled_descendants(root_hub))
+		return false;
+
+	/* No reason to keep the PHY powered, so allow poweroff */
+	return true;
+}
+
+/**
+ * dwc2_host_enter_partial_power_down() - Put controller in partial
+ * power down.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ * Return: non-zero if failed to enter host partial power down.
+ *
+ * This function is for entering Host mode partial power down.
+ */
+int dwc2_host_enter_partial_power_down(struct dwc2_hsotg *hsotg)
+{
+	u32 pcgcctl;
+	u32 hprt0;
+	int ret = 0;
+
+	dev_dbg(hsotg->dev, "Entering host partial power down started.\n");
+
+	/* Put this port in suspend mode. */
+	hprt0 = dwc2_read_hprt0(hsotg);
+	hprt0 |= HPRT0_SUSP;
+	dwc2_writel(hsotg, hprt0, HPRT0);
+	udelay(5);
+
+	/* Wait for the HPRT0.PrtSusp register field to be set */
+	if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 3000))
+		dev_warn(hsotg->dev, "Suspend wasn't generated\n");
+
+	/* Backup all registers */
+	ret = dwc2_backup_global_registers(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to backup global registers\n",
+			__func__);
+		return ret;
+	}
+
+	ret = dwc2_backup_host_registers(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to backup host registers\n",
+			__func__);
+		return ret;
+	}
+
+	/*
+	 * Clear any pending interrupts since dwc2 will not be able to
+	 * clear them after entering partial_power_down.
+	 */
+	dwc2_writel(hsotg, 0xffffffff, GINTSTS);
+
+	/* Put the controller in low power state */
+	pcgcctl = dwc2_readl(hsotg, PCGCTL);
+
+	pcgcctl |= PCGCTL_PWRCLMP;
+	dwc2_writel(hsotg, pcgcctl, PCGCTL);
+	udelay(5);
+
+	pcgcctl |= PCGCTL_RSTPDWNMODULE;
+	dwc2_writel(hsotg, pcgcctl, PCGCTL);
+	udelay(5);
+
+	pcgcctl |= PCGCTL_STOPPCLK;
+	dwc2_writel(hsotg, pcgcctl, PCGCTL);
+
+	/* Set in_ppd flag to 1 as here core enters suspend. */
+	hsotg->in_ppd = 1;
+	hsotg->lx_state = DWC2_L2;
+	hsotg->bus_suspended = true;
+
+	dev_dbg(hsotg->dev, "Entering host partial power down completed.\n");
+
+	return ret;
+}
+
+/*
+ * dwc2_host_exit_partial_power_down() - Exit controller from host partial
+ * power down.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @rem_wakeup: indicates whether resume is initiated by Reset.
+ * @restore: indicates whether need to restore the registers or not.
+ *
+ * Return: non-zero if failed to exit host partial power down.
+ *
+ * This function is for exiting from Host mode partial power down.
+ */
+int dwc2_host_exit_partial_power_down(struct dwc2_hsotg *hsotg,
+				      int rem_wakeup, bool restore)
+{
+	u32 pcgcctl;
+	int ret = 0;
+	u32 hprt0;
+
+	dev_dbg(hsotg->dev, "Exiting host partial power down started.\n");
+
+	pcgcctl = dwc2_readl(hsotg, PCGCTL);
+	pcgcctl &= ~PCGCTL_STOPPCLK;
+	dwc2_writel(hsotg, pcgcctl, PCGCTL);
+	udelay(5);
+
+	pcgcctl = dwc2_readl(hsotg, PCGCTL);
+	pcgcctl &= ~PCGCTL_PWRCLMP;
+	dwc2_writel(hsotg, pcgcctl, PCGCTL);
+	udelay(5);
+
+	pcgcctl = dwc2_readl(hsotg, PCGCTL);
+	pcgcctl &= ~PCGCTL_RSTPDWNMODULE;
+	dwc2_writel(hsotg, pcgcctl, PCGCTL);
+
+	udelay(100);
+	if (restore) {
+		ret = dwc2_restore_global_registers(hsotg);
+		if (ret) {
+			dev_err(hsotg->dev, "%s: failed to restore registers\n",
+				__func__);
+			return ret;
+		}
+
+		ret = dwc2_restore_host_registers(hsotg);
+		if (ret) {
+			dev_err(hsotg->dev, "%s: failed to restore host registers\n",
+				__func__);
+			return ret;
+		}
+	}
+
+	/* Drive resume signaling and exit suspend mode on the port. */
+	hprt0 = dwc2_read_hprt0(hsotg);
+	hprt0 |= HPRT0_RES;
+	hprt0 &= ~HPRT0_SUSP;
+	dwc2_writel(hsotg, hprt0, HPRT0);
+	udelay(5);
+
+	if (!rem_wakeup) {
+		/* Stop driveing resume signaling on the port. */
+		hprt0 = dwc2_read_hprt0(hsotg);
+		hprt0 &= ~HPRT0_RES;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+
+		hsotg->bus_suspended = false;
+	} else {
+		/* Turn on the port power bit. */
+		hprt0 = dwc2_read_hprt0(hsotg);
+		hprt0 |= HPRT0_PWR;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+
+		/* Connect hcd. */
+		dwc2_hcd_connect(hsotg);
+
+		mod_timer(&hsotg->wkp_timer,
+			  jiffies + msecs_to_jiffies(71));
+	}
+
+	/* Set lx_state to and in_ppd to 0 as here core exits from suspend. */
+	hsotg->in_ppd = 0;
+	hsotg->lx_state = DWC2_L0;
+
+	dev_dbg(hsotg->dev, "Exiting host partial power down completed.\n");
+	return ret;
+}
+
+/**
+ * dwc2_host_enter_clock_gating() - Put controller in clock gating.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ * This function is for entering Host mode clock gating.
+ */
+void dwc2_host_enter_clock_gating(struct dwc2_hsotg *hsotg)
+{
+	u32 hprt0;
+	u32 pcgctl;
+
+	dev_dbg(hsotg->dev, "Entering host clock gating.\n");
+
+	/* Put this port in suspend mode. */
+	hprt0 = dwc2_read_hprt0(hsotg);
+	hprt0 |= HPRT0_SUSP;
+	dwc2_writel(hsotg, hprt0, HPRT0);
+
+	/* Set the Phy Clock bit as suspend is received. */
+	pcgctl = dwc2_readl(hsotg, PCGCTL);
+	pcgctl |= PCGCTL_STOPPCLK;
+	dwc2_writel(hsotg, pcgctl, PCGCTL);
+	udelay(5);
+
+	/* Set the Gate hclk as suspend is received. */
+	pcgctl = dwc2_readl(hsotg, PCGCTL);
+	pcgctl |= PCGCTL_GATEHCLK;
+	dwc2_writel(hsotg, pcgctl, PCGCTL);
+	udelay(5);
+
+	hsotg->bus_suspended = true;
+	hsotg->lx_state = DWC2_L2;
+}
+
+/**
+ * dwc2_host_exit_clock_gating() - Exit controller from clock gating.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @rem_wakeup: indicates whether resume is initiated by remote wakeup
+ *
+ * This function is for exiting Host mode clock gating.
+ */
+void dwc2_host_exit_clock_gating(struct dwc2_hsotg *hsotg, int rem_wakeup)
+{
+	u32 hprt0;
+	u32 pcgctl;
+
+	dev_dbg(hsotg->dev, "Exiting host clock gating.\n");
+
+	/* Clear the Gate hclk. */
+	pcgctl = dwc2_readl(hsotg, PCGCTL);
+	pcgctl &= ~PCGCTL_GATEHCLK;
+	dwc2_writel(hsotg, pcgctl, PCGCTL);
+	udelay(5);
+
+	/* Phy Clock bit. */
+	pcgctl = dwc2_readl(hsotg, PCGCTL);
+	pcgctl &= ~PCGCTL_STOPPCLK;
+	dwc2_writel(hsotg, pcgctl, PCGCTL);
+	udelay(5);
+
+	/* Drive resume signaling and exit suspend mode on the port. */
+	hprt0 = dwc2_read_hprt0(hsotg);
+	hprt0 |= HPRT0_RES;
+	hprt0 &= ~HPRT0_SUSP;
+	dwc2_writel(hsotg, hprt0, HPRT0);
+	udelay(5);
+
+	if (!rem_wakeup) {
+		/* In case of port resume need to wait for 40 ms */
+		msleep(USB_RESUME_TIMEOUT);
+
+		/* Stop driveing resume signaling on the port. */
+		hprt0 = dwc2_read_hprt0(hsotg);
+		hprt0 &= ~HPRT0_RES;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+
+		hsotg->bus_suspended = false;
+		hsotg->lx_state = DWC2_L0;
+	} else {
+		mod_timer(&hsotg->wkp_timer,
+			  jiffies + msecs_to_jiffies(71));
+	}
+}
diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
new file mode 100644
index 000000000..b7254d94f
--- /dev/null
+++ b/drivers/usb/dwc2/hcd.h
@@ -0,0 +1,787 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * hcd.h - DesignWare HS OTG Controller host-mode declarations
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ */
+
+#ifndef __DWC2_HCD_H__
+#define __DWC2_HCD_H__
+
+/*
+ * This file contains the structures, constants, and interfaces for the
+ * Host Contoller Driver (HCD)
+ *
+ * The Host Controller Driver (HCD) is responsible for translating requests
+ * from the USB Driver into the appropriate actions on the DWC_otg controller.
+ * It isolates the USBD from the specifics of the controller by providing an
+ * API to the USBD.
+ */
+
+struct dwc2_qh;
+
+/**
+ * struct dwc2_host_chan - Software host channel descriptor
+ *
+ * @hc_num:             Host channel number, used for register address lookup
+ * @dev_addr:           Address of the device
+ * @ep_num:             Endpoint of the device
+ * @ep_is_in:           Endpoint direction
+ * @speed:              Device speed. One of the following values:
+ *                       - USB_SPEED_LOW
+ *                       - USB_SPEED_FULL
+ *                       - USB_SPEED_HIGH
+ * @ep_type:            Endpoint type. One of the following values:
+ *                       - USB_ENDPOINT_XFER_CONTROL: 0
+ *                       - USB_ENDPOINT_XFER_ISOC:    1
+ *                       - USB_ENDPOINT_XFER_BULK:    2
+ *                       - USB_ENDPOINT_XFER_INTR:    3
+ * @max_packet:         Max packet size in bytes
+ * @data_pid_start:     PID for initial transaction.
+ *                       0: DATA0
+ *                       1: DATA2
+ *                       2: DATA1
+ *                       3: MDATA (non-Control EP),
+ *                          SETUP (Control EP)
+ * @multi_count:        Number of additional periodic transactions per
+ *                      (micro)frame
+ * @xfer_buf:           Pointer to current transfer buffer position
+ * @xfer_dma:           DMA address of xfer_buf
+ * @align_buf:          In Buffer DMA mode this will be used if xfer_buf is not
+ *                      DWORD aligned
+ * @xfer_len:           Total number of bytes to transfer
+ * @xfer_count:         Number of bytes transferred so far
+ * @start_pkt_count:    Packet count at start of transfer
+ * @xfer_started:       True if the transfer has been started
+ * @do_ping:            True if a PING request should be issued on this channel
+ * @error_state:        True if the error count for this transaction is non-zero
+ * @halt_on_queue:      True if this channel should be halted the next time a
+ *                      request is queued for the channel. This is necessary in
+ *                      slave mode if no request queue space is available when
+ *                      an attempt is made to halt the channel.
+ * @halt_pending:       True if the host channel has been halted, but the core
+ *                      is not finished flushing queued requests
+ * @do_split:           Enable split for the channel
+ * @complete_split:     Enable complete split
+ * @hub_addr:           Address of high speed hub for the split
+ * @hub_port:           Port of the low/full speed device for the split
+ * @xact_pos:           Split transaction position. One of the following values:
+ *                       - DWC2_HCSPLT_XACTPOS_MID
+ *                       - DWC2_HCSPLT_XACTPOS_BEGIN
+ *                       - DWC2_HCSPLT_XACTPOS_END
+ *                       - DWC2_HCSPLT_XACTPOS_ALL
+ * @requests:           Number of requests issued for this channel since it was
+ *                      assigned to the current transfer (not counting PINGs)
+ * @schinfo:            Scheduling micro-frame bitmap
+ * @ntd:                Number of transfer descriptors for the transfer
+ * @halt_status:        Reason for halting the host channel
+ * @hcint:               Contents of the HCINT register when the interrupt came
+ * @qh:                 QH for the transfer being processed by this channel
+ * @hc_list_entry:      For linking to list of host channels
+ * @desc_list_addr:     Current QH's descriptor list DMA address
+ * @desc_list_sz:       Current QH's descriptor list size
+ * @split_order_list_entry: List entry for keeping track of the order of splits
+ *
+ * This structure represents the state of a single host channel when acting in
+ * host mode. It contains the data items needed to transfer packets to an
+ * endpoint via a host channel.
+ */
+struct dwc2_host_chan {
+	u8 hc_num;
+
+	unsigned dev_addr:7;
+	unsigned ep_num:4;
+	unsigned ep_is_in:1;
+	unsigned speed:4;
+	unsigned ep_type:2;
+	unsigned max_packet:11;
+	unsigned data_pid_start:2;
+#define DWC2_HC_PID_DATA0	TSIZ_SC_MC_PID_DATA0
+#define DWC2_HC_PID_DATA2	TSIZ_SC_MC_PID_DATA2
+#define DWC2_HC_PID_DATA1	TSIZ_SC_MC_PID_DATA1
+#define DWC2_HC_PID_MDATA	TSIZ_SC_MC_PID_MDATA
+#define DWC2_HC_PID_SETUP	TSIZ_SC_MC_PID_SETUP
+
+	unsigned multi_count:2;
+
+	u8 *xfer_buf;
+	dma_addr_t xfer_dma;
+	dma_addr_t align_buf;
+	u32 xfer_len;
+	u32 xfer_count;
+	u16 start_pkt_count;
+	u8 xfer_started;
+	u8 do_ping;
+	u8 error_state;
+	u8 halt_on_queue;
+	u8 halt_pending;
+	u8 do_split;
+	u8 complete_split;
+	u8 hub_addr;
+	u8 hub_port;
+	u8 xact_pos;
+#define DWC2_HCSPLT_XACTPOS_MID	HCSPLT_XACTPOS_MID
+#define DWC2_HCSPLT_XACTPOS_END	HCSPLT_XACTPOS_END
+#define DWC2_HCSPLT_XACTPOS_BEGIN HCSPLT_XACTPOS_BEGIN
+#define DWC2_HCSPLT_XACTPOS_ALL	HCSPLT_XACTPOS_ALL
+
+	u8 requests;
+	u8 schinfo;
+	u16 ntd;
+	enum dwc2_halt_status halt_status;
+	u32 hcint;
+	struct dwc2_qh *qh;
+	struct list_head hc_list_entry;
+	dma_addr_t desc_list_addr;
+	u32 desc_list_sz;
+	struct list_head split_order_list_entry;
+};
+
+struct dwc2_hcd_pipe_info {
+	u8 dev_addr;
+	u8 ep_num;
+	u8 pipe_type;
+	u8 pipe_dir;
+	u16 maxp;
+	u16 maxp_mult;
+};
+
+struct dwc2_hcd_iso_packet_desc {
+	u32 offset;
+	u32 length;
+	u32 actual_length;
+	u32 status;
+};
+
+struct dwc2_qtd;
+
+struct dwc2_hcd_urb {
+	void *priv;
+	struct dwc2_qtd *qtd;
+	void *buf;
+	dma_addr_t dma;
+	void *setup_packet;
+	dma_addr_t setup_dma;
+	u32 length;
+	u32 actual_length;
+	u32 status;
+	u32 error_count;
+	u32 packet_count;
+	u32 flags;
+	u16 interval;
+	struct dwc2_hcd_pipe_info pipe_info;
+	struct dwc2_hcd_iso_packet_desc iso_descs[];
+};
+
+/* Phases for control transfers */
+enum dwc2_control_phase {
+	DWC2_CONTROL_SETUP,
+	DWC2_CONTROL_DATA,
+	DWC2_CONTROL_STATUS,
+};
+
+/* Transaction types */
+enum dwc2_transaction_type {
+	DWC2_TRANSACTION_NONE,
+	DWC2_TRANSACTION_PERIODIC,
+	DWC2_TRANSACTION_NON_PERIODIC,
+	DWC2_TRANSACTION_ALL,
+};
+
+/* The number of elements per LS bitmap (per port on multi_tt) */
+#define DWC2_ELEMENTS_PER_LS_BITMAP	DIV_ROUND_UP(DWC2_LS_SCHEDULE_SLICES, \
+						     BITS_PER_LONG)
+
+/**
+ * struct dwc2_tt - dwc2 data associated with a usb_tt
+ *
+ * @refcount:           Number of Queue Heads (QHs) holding a reference.
+ * @usb_tt:             Pointer back to the official usb_tt.
+ * @periodic_bitmaps:   Bitmap for which parts of the 1ms frame are accounted
+ *                      for already.  Each is DWC2_ELEMENTS_PER_LS_BITMAP
+ *			elements (so sizeof(long) times that in bytes).
+ *
+ * This structure is stored in the hcpriv of the official usb_tt.
+ */
+struct dwc2_tt {
+	int refcount;
+	struct usb_tt *usb_tt;
+	unsigned long periodic_bitmaps[];
+};
+
+/**
+ * struct dwc2_hs_transfer_time - Info about a transfer on the high speed bus.
+ *
+ * @start_schedule_us:  The start time on the main bus schedule.  Note that
+ *                         the main bus schedule is tightly packed and this
+ *			   time should be interpreted as tightly packed (so
+ *			   uFrame 0 starts at 0 us, uFrame 1 starts at 100 us
+ *			   instead of 125 us).
+ * @duration_us:           How long this transfer goes.
+ */
+
+struct dwc2_hs_transfer_time {
+	u32 start_schedule_us;
+	u16 duration_us;
+};
+
+/**
+ * struct dwc2_qh - Software queue head structure
+ *
+ * @hsotg:              The HCD state structure for the DWC OTG controller
+ * @ep_type:            Endpoint type. One of the following values:
+ *                       - USB_ENDPOINT_XFER_CONTROL
+ *                       - USB_ENDPOINT_XFER_BULK
+ *                       - USB_ENDPOINT_XFER_INT
+ *                       - USB_ENDPOINT_XFER_ISOC
+ * @ep_is_in:           Endpoint direction
+ * @maxp:               Value from wMaxPacketSize field of Endpoint Descriptor
+ * @maxp_mult:          Multiplier for maxp
+ * @dev_speed:          Device speed. One of the following values:
+ *                       - USB_SPEED_LOW
+ *                       - USB_SPEED_FULL
+ *                       - USB_SPEED_HIGH
+ * @data_toggle:        Determines the PID of the next data packet for
+ *                      non-controltransfers. Ignored for control transfers.
+ *                      One of the following values:
+ *                       - DWC2_HC_PID_DATA0
+ *                       - DWC2_HC_PID_DATA1
+ * @ping_state:         Ping state
+ * @do_split:           Full/low speed endpoint on high-speed hub requires split
+ * @td_first:           Index of first activated isochronous transfer descriptor
+ * @td_last:            Index of last activated isochronous transfer descriptor
+ * @host_us:            Bandwidth in microseconds per transfer as seen by host
+ * @device_us:          Bandwidth in microseconds per transfer as seen by device
+ * @host_interval:      Interval between transfers as seen by the host.  If
+ *                      the host is high speed and the device is low speed this
+ *                      will be 8 times device interval.
+ * @device_interval:    Interval between transfers as seen by the device.
+ *                      interval.
+ * @next_active_frame:  (Micro)frame _before_ we next need to put something on
+ *                      the bus.  We'll move the qh to active here.  If the
+ *                      host is in high speed mode this will be a uframe.  If
+ *                      the host is in low speed mode this will be a full frame.
+ * @start_active_frame: If we are partway through a split transfer, this will be
+ *			what next_active_frame was when we started.  Otherwise
+ *			it should always be the same as next_active_frame.
+ * @num_hs_transfers:   Number of transfers in hs_transfers.
+ *                      Normally this is 1 but can be more than one for splits.
+ *                      Always >= 1 unless the host is in low/full speed mode.
+ * @hs_transfers:       Transfers that are scheduled as seen by the high speed
+ *                      bus.  Not used if host is in low or full speed mode (but
+ *                      note that it IS USED if the device is low or full speed
+ *                      as long as the HOST is in high speed mode).
+ * @ls_start_schedule_slice: Start time (in slices) on the low speed bus
+ *                           schedule that's being used by this device.  This
+ *			     will be on the periodic_bitmap in a
+ *                           "struct dwc2_tt".  Not used if this device is high
+ *                           speed.  Note that this is in "schedule slice" which
+ *                           is tightly packed.
+ * @ntd:                Actual number of transfer descriptors in a list
+ * @dw_align_buf:       Used instead of original buffer if its physical address
+ *                      is not dword-aligned
+ * @dw_align_buf_dma:   DMA address for dw_align_buf
+ * @qtd_list:           List of QTDs for this QH
+ * @channel:            Host channel currently processing transfers for this QH
+ * @qh_list_entry:      Entry for QH in either the periodic or non-periodic
+ *                      schedule
+ * @desc_list:          List of transfer descriptors
+ * @desc_list_dma:      Physical address of desc_list
+ * @desc_list_sz:       Size of descriptors list
+ * @n_bytes:            Xfer Bytes array. Each element corresponds to a transfer
+ *                      descriptor and indicates original XferSize value for the
+ *                      descriptor
+ * @unreserve_timer:    Timer for releasing periodic reservation.
+ * @wait_timer:         Timer used to wait before re-queuing.
+ * @dwc_tt:            Pointer to our tt info (or NULL if no tt).
+ * @ttport:             Port number within our tt.
+ * @tt_buffer_dirty     True if clear_tt_buffer_complete is pending
+ * @unreserve_pending:  True if we planned to unreserve but haven't yet.
+ * @schedule_low_speed: True if we have a low/full speed component (either the
+ *			host is in low/full speed mode or do_split).
+ * @want_wait:          We should wait before re-queuing; only matters for non-
+ *                      periodic transfers and is ignored for periodic ones.
+ * @wait_timer_cancel:  Set to true to cancel the wait_timer.
+ *
+ * @tt_buffer_dirty:	True if EP's TT buffer is not clean.
+ * A Queue Head (QH) holds the static characteristics of an endpoint and
+ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
+ * be entered in either the non-periodic or periodic schedule.
+ */
+struct dwc2_qh {
+	struct dwc2_hsotg *hsotg;
+	u8 ep_type;
+	u8 ep_is_in;
+	u16 maxp;
+	u16 maxp_mult;
+	u8 dev_speed;
+	u8 data_toggle;
+	u8 ping_state;
+	u8 do_split;
+	u8 td_first;
+	u8 td_last;
+	u16 host_us;
+	u16 device_us;
+	u16 host_interval;
+	u16 device_interval;
+	u16 next_active_frame;
+	u16 start_active_frame;
+	s16 num_hs_transfers;
+	struct dwc2_hs_transfer_time hs_transfers[DWC2_HS_SCHEDULE_UFRAMES];
+	u32 ls_start_schedule_slice;
+	u16 ntd;
+	u8 *dw_align_buf;
+	dma_addr_t dw_align_buf_dma;
+	struct list_head qtd_list;
+	struct dwc2_host_chan *channel;
+	struct list_head qh_list_entry;
+	struct dwc2_dma_desc *desc_list;
+	dma_addr_t desc_list_dma;
+	u32 desc_list_sz;
+	u32 *n_bytes;
+	struct timer_list unreserve_timer;
+	struct hrtimer wait_timer;
+	struct dwc2_tt *dwc_tt;
+	int ttport;
+	unsigned tt_buffer_dirty:1;
+	unsigned unreserve_pending:1;
+	unsigned schedule_low_speed:1;
+	unsigned want_wait:1;
+	unsigned wait_timer_cancel:1;
+};
+
+/**
+ * struct dwc2_qtd - Software queue transfer descriptor (QTD)
+ *
+ * @control_phase:      Current phase for control transfers (Setup, Data, or
+ *                      Status)
+ * @in_process:         Indicates if this QTD is currently processed by HW
+ * @data_toggle:        Determines the PID of the next data packet for the
+ *                      data phase of control transfers. Ignored for other
+ *                      transfer types. One of the following values:
+ *                       - DWC2_HC_PID_DATA0
+ *                       - DWC2_HC_PID_DATA1
+ * @complete_split:     Keeps track of the current split type for FS/LS
+ *                      endpoints on a HS Hub
+ * @isoc_split_pos:     Position of the ISOC split in full/low speed
+ * @isoc_frame_index:   Index of the next frame descriptor for an isochronous
+ *                      transfer. A frame descriptor describes the buffer
+ *                      position and length of the data to be transferred in the
+ *                      next scheduled (micro)frame of an isochronous transfer.
+ *                      It also holds status for that transaction. The frame
+ *                      index starts at 0.
+ * @isoc_split_offset:  Position of the ISOC split in the buffer for the
+ *                      current frame
+ * @ssplit_out_xfer_count: How many bytes transferred during SSPLIT OUT
+ * @error_count:        Holds the number of bus errors that have occurred for
+ *                      a transaction within this transfer
+ * @n_desc:             Number of DMA descriptors for this QTD
+ * @isoc_frame_index_last: Last activated frame (packet) index, used in
+ *                      descriptor DMA mode only
+ * @num_naks:           Number of NAKs received on this QTD.
+ * @urb:                URB for this transfer
+ * @qh:                 Queue head for this QTD
+ * @qtd_list_entry:     For linking to the QH's list of QTDs
+ * @isoc_td_first:	Index of first activated isochronous transfer
+ *			descriptor in Descriptor DMA mode
+ * @isoc_td_last:	Index of last activated isochronous transfer
+ *			descriptor in Descriptor DMA mode
+ *
+ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
+ * interrupt, or isochronous transfer. A single QTD is created for each URB
+ * (of one of these types) submitted to the HCD. The transfer associated with
+ * a QTD may require one or multiple transactions.
+ *
+ * A QTD is linked to a Queue Head, which is entered in either the
+ * non-periodic or periodic schedule for execution. When a QTD is chosen for
+ * execution, some or all of its transactions may be executed. After
+ * execution, the state of the QTD is updated. The QTD may be retired if all
+ * its transactions are complete or if an error occurred. Otherwise, it
+ * remains in the schedule so more transactions can be executed later.
+ */
+struct dwc2_qtd {
+	enum dwc2_control_phase control_phase;
+	u8 in_process;
+	u8 data_toggle;
+	u8 complete_split;
+	u8 isoc_split_pos;
+	u16 isoc_frame_index;
+	u16 isoc_split_offset;
+	u16 isoc_td_last;
+	u16 isoc_td_first;
+	u32 ssplit_out_xfer_count;
+	u8 error_count;
+	u8 n_desc;
+	u16 isoc_frame_index_last;
+	u16 num_naks;
+	struct dwc2_hcd_urb *urb;
+	struct dwc2_qh *qh;
+	struct list_head qtd_list_entry;
+};
+
+#ifdef DEBUG
+struct hc_xfer_info {
+	struct dwc2_hsotg *hsotg;
+	struct dwc2_host_chan *chan;
+};
+#endif
+
+u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg);
+
+/* Gets the struct usb_hcd that contains a struct dwc2_hsotg */
+static inline struct usb_hcd *dwc2_hsotg_to_hcd(struct dwc2_hsotg *hsotg)
+{
+	return (struct usb_hcd *)hsotg->priv;
+}
+
+/*
+ * Inline used to disable one channel interrupt. Channel interrupts are
+ * disabled when the channel is halted or released by the interrupt handler.
+ * There is no need to handle further interrupts of that type until the
+ * channel is re-assigned. In fact, subsequent handling may cause crashes
+ * because the channel structures are cleaned up when the channel is released.
+ */
+static inline void disable_hc_int(struct dwc2_hsotg *hsotg, int chnum, u32 intr)
+{
+	u32 mask = dwc2_readl(hsotg, HCINTMSK(chnum));
+
+	mask &= ~intr;
+	dwc2_writel(hsotg, mask, HCINTMSK(chnum));
+}
+
+void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan);
+void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
+		  enum dwc2_halt_status halt_status);
+void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
+				 struct dwc2_host_chan *chan);
+
+/*
+ * Reads HPRT0 in preparation to modify. It keeps the WC bits 0 so that if they
+ * are read as 1, they won't clear when written back.
+ */
+static inline u32 dwc2_read_hprt0(struct dwc2_hsotg *hsotg)
+{
+	u32 hprt0 = dwc2_readl(hsotg, HPRT0);
+
+	hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
+	return hprt0;
+}
+
+static inline u8 dwc2_hcd_get_ep_num(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->ep_num;
+}
+
+static inline u8 dwc2_hcd_get_pipe_type(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->pipe_type;
+}
+
+static inline u16 dwc2_hcd_get_maxp(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->maxp;
+}
+
+static inline u16 dwc2_hcd_get_maxp_mult(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->maxp_mult;
+}
+
+static inline u8 dwc2_hcd_get_dev_addr(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->dev_addr;
+}
+
+static inline u8 dwc2_hcd_is_pipe_isoc(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->pipe_type == USB_ENDPOINT_XFER_ISOC;
+}
+
+static inline u8 dwc2_hcd_is_pipe_int(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->pipe_type == USB_ENDPOINT_XFER_INT;
+}
+
+static inline u8 dwc2_hcd_is_pipe_bulk(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->pipe_type == USB_ENDPOINT_XFER_BULK;
+}
+
+static inline u8 dwc2_hcd_is_pipe_control(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->pipe_type == USB_ENDPOINT_XFER_CONTROL;
+}
+
+static inline u8 dwc2_hcd_is_pipe_in(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->pipe_dir == USB_DIR_IN;
+}
+
+static inline u8 dwc2_hcd_is_pipe_out(struct dwc2_hcd_pipe_info *pipe)
+{
+	return !dwc2_hcd_is_pipe_in(pipe);
+}
+
+int dwc2_hcd_init(struct dwc2_hsotg *hsotg);
+void dwc2_hcd_remove(struct dwc2_hsotg *hsotg);
+
+/* Transaction Execution Functions */
+enum dwc2_transaction_type dwc2_hcd_select_transactions(
+						struct dwc2_hsotg *hsotg);
+void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg,
+				 enum dwc2_transaction_type tr_type);
+
+/* Schedule Queue Functions */
+/* Implemented in hcd_queue.c */
+struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg,
+				   struct dwc2_hcd_urb *urb,
+					  gfp_t mem_flags);
+void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
+int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
+void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
+void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+			    int sched_csplit);
+
+void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb);
+int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
+		     struct dwc2_qh *qh);
+
+/* Unlinks and frees a QTD */
+static inline void dwc2_hcd_qtd_unlink_and_free(struct dwc2_hsotg *hsotg,
+						struct dwc2_qtd *qtd,
+						struct dwc2_qh *qh)
+{
+	list_del(&qtd->qtd_list_entry);
+	kfree(qtd);
+}
+
+/* Descriptor DMA support functions */
+void dwc2_hcd_start_xfer_ddma(struct dwc2_hsotg *hsotg,
+			      struct dwc2_qh *qh);
+void dwc2_hcd_complete_xfer_ddma(struct dwc2_hsotg *hsotg,
+				 struct dwc2_host_chan *chan, int chnum,
+					enum dwc2_halt_status halt_status);
+
+int dwc2_hcd_qh_init_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+			  gfp_t mem_flags);
+void dwc2_hcd_qh_free_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
+
+/* Check if QH is non-periodic */
+#define dwc2_qh_is_non_per(_qh_ptr_) \
+	((_qh_ptr_)->ep_type == USB_ENDPOINT_XFER_BULK || \
+	 (_qh_ptr_)->ep_type == USB_ENDPOINT_XFER_CONTROL)
+
+#ifdef CONFIG_USB_DWC2_DEBUG_PERIODIC
+static inline bool dbg_hc(struct dwc2_host_chan *hc) { return true; }
+static inline bool dbg_qh(struct dwc2_qh *qh) { return true; }
+static inline bool dbg_urb(struct urb *urb) { return true; }
+static inline bool dbg_perio(void) { return true; }
+#else /* !CONFIG_USB_DWC2_DEBUG_PERIODIC */
+static inline bool dbg_hc(struct dwc2_host_chan *hc)
+{
+	return hc->ep_type == USB_ENDPOINT_XFER_BULK ||
+	       hc->ep_type == USB_ENDPOINT_XFER_CONTROL;
+}
+
+static inline bool dbg_qh(struct dwc2_qh *qh)
+{
+	return qh->ep_type == USB_ENDPOINT_XFER_BULK ||
+	       qh->ep_type == USB_ENDPOINT_XFER_CONTROL;
+}
+
+static inline bool dbg_urb(struct urb *urb)
+{
+	return usb_pipetype(urb->pipe) == PIPE_BULK ||
+	       usb_pipetype(urb->pipe) == PIPE_CONTROL;
+}
+
+static inline bool dbg_perio(void) { return false; }
+#endif
+
+/*
+ * Returns true if frame1 index is greater than frame2 index. The comparison
+ * is done modulo FRLISTEN_64_SIZE. This accounts for the rollover of the
+ * frame number when the max index frame number is reached.
+ */
+static inline bool dwc2_frame_idx_num_gt(u16 fr_idx1, u16 fr_idx2)
+{
+	u16 diff = fr_idx1 - fr_idx2;
+	u16 sign = diff & (FRLISTEN_64_SIZE >> 1);
+
+	return diff && !sign;
+}
+
+/*
+ * Returns true if frame1 is less than or equal to frame2. The comparison is
+ * done modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the
+ * frame number when the max frame number is reached.
+ */
+static inline int dwc2_frame_num_le(u16 frame1, u16 frame2)
+{
+	return ((frame2 - frame1) & HFNUM_MAX_FRNUM) <= (HFNUM_MAX_FRNUM >> 1);
+}
+
+/*
+ * Returns true if frame1 is greater than frame2. The comparison is done
+ * modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
+ * number when the max frame number is reached.
+ */
+static inline int dwc2_frame_num_gt(u16 frame1, u16 frame2)
+{
+	return (frame1 != frame2) &&
+	       ((frame1 - frame2) & HFNUM_MAX_FRNUM) < (HFNUM_MAX_FRNUM >> 1);
+}
+
+/*
+ * Increments frame by the amount specified by inc. The addition is done
+ * modulo HFNUM_MAX_FRNUM. Returns the incremented value.
+ */
+static inline u16 dwc2_frame_num_inc(u16 frame, u16 inc)
+{
+	return (frame + inc) & HFNUM_MAX_FRNUM;
+}
+
+static inline u16 dwc2_frame_num_dec(u16 frame, u16 dec)
+{
+	return (frame + HFNUM_MAX_FRNUM + 1 - dec) & HFNUM_MAX_FRNUM;
+}
+
+static inline u16 dwc2_full_frame_num(u16 frame)
+{
+	return (frame & HFNUM_MAX_FRNUM) >> 3;
+}
+
+static inline u16 dwc2_micro_frame_num(u16 frame)
+{
+	return frame & 0x7;
+}
+
+/*
+ * Returns the Core Interrupt Status register contents, ANDed with the Core
+ * Interrupt Mask register contents
+ */
+static inline u32 dwc2_read_core_intr(struct dwc2_hsotg *hsotg)
+{
+	return dwc2_readl(hsotg, GINTSTS) &
+	       dwc2_readl(hsotg, GINTMSK);
+}
+
+static inline u32 dwc2_hcd_urb_get_status(struct dwc2_hcd_urb *dwc2_urb)
+{
+	return dwc2_urb->status;
+}
+
+static inline u32 dwc2_hcd_urb_get_actual_length(
+		struct dwc2_hcd_urb *dwc2_urb)
+{
+	return dwc2_urb->actual_length;
+}
+
+static inline u32 dwc2_hcd_urb_get_error_count(struct dwc2_hcd_urb *dwc2_urb)
+{
+	return dwc2_urb->error_count;
+}
+
+static inline void dwc2_hcd_urb_set_iso_desc_params(
+		struct dwc2_hcd_urb *dwc2_urb, int desc_num, u32 offset,
+		u32 length)
+{
+	dwc2_urb->iso_descs[desc_num].offset = offset;
+	dwc2_urb->iso_descs[desc_num].length = length;
+}
+
+static inline u32 dwc2_hcd_urb_get_iso_desc_status(
+		struct dwc2_hcd_urb *dwc2_urb, int desc_num)
+{
+	return dwc2_urb->iso_descs[desc_num].status;
+}
+
+static inline u32 dwc2_hcd_urb_get_iso_desc_actual_length(
+		struct dwc2_hcd_urb *dwc2_urb, int desc_num)
+{
+	return dwc2_urb->iso_descs[desc_num].actual_length;
+}
+
+static inline int dwc2_hcd_is_bandwidth_allocated(struct dwc2_hsotg *hsotg,
+						  struct usb_host_endpoint *ep)
+{
+	struct dwc2_qh *qh = ep->hcpriv;
+
+	if (qh && !list_empty(&qh->qh_list_entry))
+		return 1;
+
+	return 0;
+}
+
+static inline u16 dwc2_hcd_get_ep_bandwidth(struct dwc2_hsotg *hsotg,
+					    struct usb_host_endpoint *ep)
+{
+	struct dwc2_qh *qh = ep->hcpriv;
+
+	if (!qh) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	return qh->host_us;
+}
+
+void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg,
+			       struct dwc2_host_chan *chan, int chnum,
+				      struct dwc2_qtd *qtd);
+
+/* HCD Core API */
+
+/**
+ * dwc2_handle_hcd_intr() - Called on every hardware interrupt
+ *
+ * @hsotg: The DWC2 HCD
+ *
+ * Returns IRQ_HANDLED if interrupt is handled
+ * Return IRQ_NONE if interrupt is not handled
+ */
+irqreturn_t dwc2_handle_hcd_intr(struct dwc2_hsotg *hsotg);
+
+/**
+ * dwc2_hcd_stop() - Halts the DWC_otg host mode operation
+ *
+ * @hsotg: The DWC2 HCD
+ */
+void dwc2_hcd_stop(struct dwc2_hsotg *hsotg);
+
+/**
+ * dwc2_hcd_is_b_host() - Returns 1 if core currently is acting as B host,
+ * and 0 otherwise
+ *
+ * @hsotg: The DWC2 HCD
+ */
+int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg);
+
+/**
+ * dwc2_hcd_dump_state() - Dumps hsotg state
+ *
+ * @hsotg: The DWC2 HCD
+ *
+ * NOTE: This function will be removed once the peripheral controller code
+ * is integrated and the driver is stable
+ */
+void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg);
+
+/* URB interface */
+
+/* Transfer flags */
+#define URB_GIVEBACK_ASAP	0x1
+#define URB_SEND_ZERO_PACKET	0x2
+
+/* Host driver callbacks */
+struct dwc2_tt *dwc2_host_get_tt_info(struct dwc2_hsotg *hsotg,
+				      void *context, gfp_t mem_flags,
+				      int *ttport);
+
+void dwc2_host_put_tt_info(struct dwc2_hsotg *hsotg,
+			   struct dwc2_tt *dwc_tt);
+int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context);
+void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
+			int status);
+
+#endif /* __DWC2_HCD_H__ */
diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c
new file mode 100644
index 000000000..6b4d825e9
--- /dev/null
+++ b/drivers/usb/dwc2/hcd_ddma.c
@@ -0,0 +1,1347 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * hcd_ddma.c - DesignWare HS OTG Controller descriptor DMA routines
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ */
+
+/*
+ * This file contains the Descriptor DMA implementation for Host mode
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+
+#include "core.h"
+#include "hcd.h"
+
+static u16 dwc2_frame_list_idx(u16 frame)
+{
+	return frame & (FRLISTEN_64_SIZE - 1);
+}
+
+static u16 dwc2_desclist_idx_inc(u16 idx, u16 inc, u8 speed)
+{
+	return (idx + inc) &
+		((speed == USB_SPEED_HIGH ? MAX_DMA_DESC_NUM_HS_ISOC :
+		  MAX_DMA_DESC_NUM_GENERIC) - 1);
+}
+
+static u16 dwc2_desclist_idx_dec(u16 idx, u16 inc, u8 speed)
+{
+	return (idx - inc) &
+		((speed == USB_SPEED_HIGH ? MAX_DMA_DESC_NUM_HS_ISOC :
+		  MAX_DMA_DESC_NUM_GENERIC) - 1);
+}
+
+static u16 dwc2_max_desc_num(struct dwc2_qh *qh)
+{
+	return (qh->ep_type == USB_ENDPOINT_XFER_ISOC &&
+		qh->dev_speed == USB_SPEED_HIGH) ?
+		MAX_DMA_DESC_NUM_HS_ISOC : MAX_DMA_DESC_NUM_GENERIC;
+}
+
+static u16 dwc2_frame_incr_val(struct dwc2_qh *qh)
+{
+	return qh->dev_speed == USB_SPEED_HIGH ?
+	       (qh->host_interval + 8 - 1) / 8 : qh->host_interval;
+}
+
+static int dwc2_desc_list_alloc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+				gfp_t flags)
+{
+	struct kmem_cache *desc_cache;
+
+	if (qh->ep_type == USB_ENDPOINT_XFER_ISOC &&
+	    qh->dev_speed == USB_SPEED_HIGH)
+		desc_cache = hsotg->desc_hsisoc_cache;
+	else
+		desc_cache = hsotg->desc_gen_cache;
+
+	qh->desc_list_sz = sizeof(struct dwc2_dma_desc) *
+						dwc2_max_desc_num(qh);
+
+	qh->desc_list = kmem_cache_zalloc(desc_cache, flags | GFP_DMA);
+	if (!qh->desc_list)
+		return -ENOMEM;
+
+	qh->desc_list_dma = dma_map_single(hsotg->dev, qh->desc_list,
+					   qh->desc_list_sz,
+					   DMA_TO_DEVICE);
+
+	qh->n_bytes = kcalloc(dwc2_max_desc_num(qh), sizeof(u32), flags);
+	if (!qh->n_bytes) {
+		dma_unmap_single(hsotg->dev, qh->desc_list_dma,
+				 qh->desc_list_sz,
+				 DMA_FROM_DEVICE);
+		kmem_cache_free(desc_cache, qh->desc_list);
+		qh->desc_list = NULL;
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void dwc2_desc_list_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	struct kmem_cache *desc_cache;
+
+	if (qh->ep_type == USB_ENDPOINT_XFER_ISOC &&
+	    qh->dev_speed == USB_SPEED_HIGH)
+		desc_cache = hsotg->desc_hsisoc_cache;
+	else
+		desc_cache = hsotg->desc_gen_cache;
+
+	if (qh->desc_list) {
+		dma_unmap_single(hsotg->dev, qh->desc_list_dma,
+				 qh->desc_list_sz, DMA_FROM_DEVICE);
+		kmem_cache_free(desc_cache, qh->desc_list);
+		qh->desc_list = NULL;
+	}
+
+	kfree(qh->n_bytes);
+	qh->n_bytes = NULL;
+}
+
+static int dwc2_frame_list_alloc(struct dwc2_hsotg *hsotg, gfp_t mem_flags)
+{
+	if (hsotg->frame_list)
+		return 0;
+
+	hsotg->frame_list_sz = 4 * FRLISTEN_64_SIZE;
+	hsotg->frame_list = kzalloc(hsotg->frame_list_sz, GFP_ATOMIC | GFP_DMA);
+	if (!hsotg->frame_list)
+		return -ENOMEM;
+
+	hsotg->frame_list_dma = dma_map_single(hsotg->dev, hsotg->frame_list,
+					       hsotg->frame_list_sz,
+					       DMA_TO_DEVICE);
+
+	return 0;
+}
+
+static void dwc2_frame_list_free(struct dwc2_hsotg *hsotg)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	if (!hsotg->frame_list) {
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		return;
+	}
+
+	dma_unmap_single(hsotg->dev, hsotg->frame_list_dma,
+			 hsotg->frame_list_sz, DMA_FROM_DEVICE);
+
+	kfree(hsotg->frame_list);
+	hsotg->frame_list = NULL;
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+static void dwc2_per_sched_enable(struct dwc2_hsotg *hsotg, u32 fr_list_en)
+{
+	u32 hcfg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	hcfg = dwc2_readl(hsotg, HCFG);
+	if (hcfg & HCFG_PERSCHEDENA) {
+		/* already enabled */
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		return;
+	}
+
+	dwc2_writel(hsotg, hsotg->frame_list_dma, HFLBADDR);
+
+	hcfg &= ~HCFG_FRLISTEN_MASK;
+	hcfg |= fr_list_en | HCFG_PERSCHEDENA;
+	dev_vdbg(hsotg->dev, "Enabling Periodic schedule\n");
+	dwc2_writel(hsotg, hcfg, HCFG);
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+static void dwc2_per_sched_disable(struct dwc2_hsotg *hsotg)
+{
+	u32 hcfg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	hcfg = dwc2_readl(hsotg, HCFG);
+	if (!(hcfg & HCFG_PERSCHEDENA)) {
+		/* already disabled */
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		return;
+	}
+
+	hcfg &= ~HCFG_PERSCHEDENA;
+	dev_vdbg(hsotg->dev, "Disabling Periodic schedule\n");
+	dwc2_writel(hsotg, hcfg, HCFG);
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+/*
+ * Activates/Deactivates FrameList entries for the channel based on endpoint
+ * servicing period
+ */
+static void dwc2_update_frame_list(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+				   int enable)
+{
+	struct dwc2_host_chan *chan;
+	u16 i, j, inc;
+
+	if (!hsotg) {
+		pr_err("hsotg = %p\n", hsotg);
+		return;
+	}
+
+	if (!qh->channel) {
+		dev_err(hsotg->dev, "qh->channel = %p\n", qh->channel);
+		return;
+	}
+
+	if (!hsotg->frame_list) {
+		dev_err(hsotg->dev, "hsotg->frame_list = %p\n",
+			hsotg->frame_list);
+		return;
+	}
+
+	chan = qh->channel;
+	inc = dwc2_frame_incr_val(qh);
+	if (qh->ep_type == USB_ENDPOINT_XFER_ISOC)
+		i = dwc2_frame_list_idx(qh->next_active_frame);
+	else
+		i = 0;
+
+	j = i;
+	do {
+		if (enable)
+			hsotg->frame_list[j] |= 1 << chan->hc_num;
+		else
+			hsotg->frame_list[j] &= ~(1 << chan->hc_num);
+		j = (j + inc) & (FRLISTEN_64_SIZE - 1);
+	} while (j != i);
+
+	/*
+	 * Sync frame list since controller will access it if periodic
+	 * channel is currently enabled.
+	 */
+	dma_sync_single_for_device(hsotg->dev,
+				   hsotg->frame_list_dma,
+				   hsotg->frame_list_sz,
+				   DMA_TO_DEVICE);
+
+	if (!enable)
+		return;
+
+	chan->schinfo = 0;
+	if (chan->speed == USB_SPEED_HIGH && qh->host_interval) {
+		j = 1;
+		/* TODO - check this */
+		inc = (8 + qh->host_interval - 1) / qh->host_interval;
+		for (i = 0; i < inc; i++) {
+			chan->schinfo |= j;
+			j = j << qh->host_interval;
+		}
+	} else {
+		chan->schinfo = 0xff;
+	}
+}
+
+static void dwc2_release_channel_ddma(struct dwc2_hsotg *hsotg,
+				      struct dwc2_qh *qh)
+{
+	struct dwc2_host_chan *chan = qh->channel;
+
+	if (dwc2_qh_is_non_per(qh)) {
+		if (hsotg->params.uframe_sched)
+			hsotg->available_host_channels++;
+		else
+			hsotg->non_periodic_channels--;
+	} else {
+		dwc2_update_frame_list(hsotg, qh, 0);
+		hsotg->available_host_channels++;
+	}
+
+	/*
+	 * The condition is added to prevent double cleanup try in case of
+	 * device disconnect. See channel cleanup in dwc2_hcd_disconnect().
+	 */
+	if (chan->qh) {
+		if (!list_empty(&chan->hc_list_entry))
+			list_del(&chan->hc_list_entry);
+		dwc2_hc_cleanup(hsotg, chan);
+		list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list);
+		chan->qh = NULL;
+	}
+
+	qh->channel = NULL;
+	qh->ntd = 0;
+
+	if (qh->desc_list)
+		memset(qh->desc_list, 0, sizeof(struct dwc2_dma_desc) *
+		       dwc2_max_desc_num(qh));
+}
+
+/**
+ * dwc2_hcd_qh_init_ddma() - Initializes a QH structure's Descriptor DMA
+ * related members
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh:    The QH to init
+ * @mem_flags: Indicates the type of memory allocation
+ *
+ * Return: 0 if successful, negative error code otherwise
+ *
+ * Allocates memory for the descriptor list. For the first periodic QH,
+ * allocates memory for the FrameList and enables periodic scheduling.
+ */
+int dwc2_hcd_qh_init_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+			  gfp_t mem_flags)
+{
+	int retval;
+
+	if (qh->do_split) {
+		dev_err(hsotg->dev,
+			"SPLIT Transfers are not supported in Descriptor DMA mode.\n");
+		retval = -EINVAL;
+		goto err0;
+	}
+
+	retval = dwc2_desc_list_alloc(hsotg, qh, mem_flags);
+	if (retval)
+		goto err0;
+
+	if (qh->ep_type == USB_ENDPOINT_XFER_ISOC ||
+	    qh->ep_type == USB_ENDPOINT_XFER_INT) {
+		if (!hsotg->frame_list) {
+			retval = dwc2_frame_list_alloc(hsotg, mem_flags);
+			if (retval)
+				goto err1;
+			/* Enable periodic schedule on first periodic QH */
+			dwc2_per_sched_enable(hsotg, HCFG_FRLISTEN_64);
+		}
+	}
+
+	qh->ntd = 0;
+	return 0;
+
+err1:
+	dwc2_desc_list_free(hsotg, qh);
+err0:
+	return retval;
+}
+
+/**
+ * dwc2_hcd_qh_free_ddma() - Frees a QH structure's Descriptor DMA related
+ * members
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh:    The QH to free
+ *
+ * Frees descriptor list memory associated with the QH. If QH is periodic and
+ * the last, frees FrameList memory and disables periodic scheduling.
+ */
+void dwc2_hcd_qh_free_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	unsigned long flags;
+
+	dwc2_desc_list_free(hsotg, qh);
+
+	/*
+	 * Channel still assigned due to some reasons.
+	 * Seen on Isoc URB dequeue. Channel halted but no subsequent
+	 * ChHalted interrupt to release the channel. Afterwards
+	 * when it comes here from endpoint disable routine
+	 * channel remains assigned.
+	 */
+	spin_lock_irqsave(&hsotg->lock, flags);
+	if (qh->channel)
+		dwc2_release_channel_ddma(hsotg, qh);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	if ((qh->ep_type == USB_ENDPOINT_XFER_ISOC ||
+	     qh->ep_type == USB_ENDPOINT_XFER_INT) &&
+	    (hsotg->params.uframe_sched ||
+	     !hsotg->periodic_channels) && hsotg->frame_list) {
+		dwc2_per_sched_disable(hsotg);
+		dwc2_frame_list_free(hsotg);
+	}
+}
+
+static u8 dwc2_frame_to_desc_idx(struct dwc2_qh *qh, u16 frame_idx)
+{
+	if (qh->dev_speed == USB_SPEED_HIGH)
+		/* Descriptor set (8 descriptors) index which is 8-aligned */
+		return (frame_idx & ((MAX_DMA_DESC_NUM_HS_ISOC / 8) - 1)) * 8;
+	else
+		return frame_idx & (MAX_DMA_DESC_NUM_GENERIC - 1);
+}
+
+/*
+ * Determine starting frame for Isochronous transfer.
+ * Few frames skipped to prevent race condition with HC.
+ */
+static u16 dwc2_calc_starting_frame(struct dwc2_hsotg *hsotg,
+				    struct dwc2_qh *qh, u16 *skip_frames)
+{
+	u16 frame;
+
+	hsotg->frame_number = dwc2_hcd_get_frame_number(hsotg);
+
+	/*
+	 * next_active_frame is always frame number (not uFrame) both in FS
+	 * and HS!
+	 */
+
+	/*
+	 * skip_frames is used to limit activated descriptors number
+	 * to avoid the situation when HC services the last activated
+	 * descriptor firstly.
+	 * Example for FS:
+	 * Current frame is 1, scheduled frame is 3. Since HC always fetches
+	 * the descriptor corresponding to curr_frame+1, the descriptor
+	 * corresponding to frame 2 will be fetched. If the number of
+	 * descriptors is max=64 (or greather) the list will be fully programmed
+	 * with Active descriptors and it is possible case (rare) that the
+	 * latest descriptor(considering rollback) corresponding to frame 2 will
+	 * be serviced first. HS case is more probable because, in fact, up to
+	 * 11 uframes (16 in the code) may be skipped.
+	 */
+	if (qh->dev_speed == USB_SPEED_HIGH) {
+		/*
+		 * Consider uframe counter also, to start xfer asap. If half of
+		 * the frame elapsed skip 2 frames otherwise just 1 frame.
+		 * Starting descriptor index must be 8-aligned, so if the
+		 * current frame is near to complete the next one is skipped as
+		 * well.
+		 */
+		if (dwc2_micro_frame_num(hsotg->frame_number) >= 5) {
+			*skip_frames = 2 * 8;
+			frame = dwc2_frame_num_inc(hsotg->frame_number,
+						   *skip_frames);
+		} else {
+			*skip_frames = 1 * 8;
+			frame = dwc2_frame_num_inc(hsotg->frame_number,
+						   *skip_frames);
+		}
+
+		frame = dwc2_full_frame_num(frame);
+	} else {
+		/*
+		 * Two frames are skipped for FS - the current and the next.
+		 * But for descriptor programming, 1 frame (descriptor) is
+		 * enough, see example above.
+		 */
+		*skip_frames = 1;
+		frame = dwc2_frame_num_inc(hsotg->frame_number, 2);
+	}
+
+	return frame;
+}
+
+/*
+ * Calculate initial descriptor index for isochronous transfer based on
+ * scheduled frame
+ */
+static u16 dwc2_recalc_initial_desc_idx(struct dwc2_hsotg *hsotg,
+					struct dwc2_qh *qh)
+{
+	u16 frame, fr_idx, fr_idx_tmp, skip_frames;
+
+	/*
+	 * With current ISOC processing algorithm the channel is being released
+	 * when no more QTDs in the list (qh->ntd == 0). Thus this function is
+	 * called only when qh->ntd == 0 and qh->channel == 0.
+	 *
+	 * So qh->channel != NULL branch is not used and just not removed from
+	 * the source file. It is required for another possible approach which
+	 * is, do not disable and release the channel when ISOC session
+	 * completed, just move QH to inactive schedule until new QTD arrives.
+	 * On new QTD, the QH moved back to 'ready' schedule, starting frame and
+	 * therefore starting desc_index are recalculated. In this case channel
+	 * is released only on ep_disable.
+	 */
+
+	/*
+	 * Calculate starting descriptor index. For INTERRUPT endpoint it is
+	 * always 0.
+	 */
+	if (qh->channel) {
+		frame = dwc2_calc_starting_frame(hsotg, qh, &skip_frames);
+		/*
+		 * Calculate initial descriptor index based on FrameList current
+		 * bitmap and servicing period
+		 */
+		fr_idx_tmp = dwc2_frame_list_idx(frame);
+		fr_idx = (FRLISTEN_64_SIZE +
+			  dwc2_frame_list_idx(qh->next_active_frame) -
+			  fr_idx_tmp) % dwc2_frame_incr_val(qh);
+		fr_idx = (fr_idx + fr_idx_tmp) % FRLISTEN_64_SIZE;
+	} else {
+		qh->next_active_frame = dwc2_calc_starting_frame(hsotg, qh,
+							   &skip_frames);
+		fr_idx = dwc2_frame_list_idx(qh->next_active_frame);
+	}
+
+	qh->td_first = qh->td_last = dwc2_frame_to_desc_idx(qh, fr_idx);
+
+	return skip_frames;
+}
+
+#define ISOC_URB_GIVEBACK_ASAP
+
+#define MAX_ISOC_XFER_SIZE_FS	1023
+#define MAX_ISOC_XFER_SIZE_HS	3072
+#define DESCNUM_THRESHOLD	4
+
+static void dwc2_fill_host_isoc_dma_desc(struct dwc2_hsotg *hsotg,
+					 struct dwc2_qtd *qtd,
+					 struct dwc2_qh *qh, u32 max_xfer_size,
+					 u16 idx)
+{
+	struct dwc2_dma_desc *dma_desc = &qh->desc_list[idx];
+	struct dwc2_hcd_iso_packet_desc *frame_desc;
+
+	memset(dma_desc, 0, sizeof(*dma_desc));
+	frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last];
+
+	if (frame_desc->length > max_xfer_size)
+		qh->n_bytes[idx] = max_xfer_size;
+	else
+		qh->n_bytes[idx] = frame_desc->length;
+
+	dma_desc->buf = (u32)(qtd->urb->dma + frame_desc->offset);
+	dma_desc->status = qh->n_bytes[idx] << HOST_DMA_ISOC_NBYTES_SHIFT &
+			   HOST_DMA_ISOC_NBYTES_MASK;
+
+	/* Set active bit */
+	dma_desc->status |= HOST_DMA_A;
+
+	qh->ntd++;
+	qtd->isoc_frame_index_last++;
+
+#ifdef ISOC_URB_GIVEBACK_ASAP
+	/* Set IOC for each descriptor corresponding to last frame of URB */
+	if (qtd->isoc_frame_index_last == qtd->urb->packet_count)
+		dma_desc->status |= HOST_DMA_IOC;
+#endif
+
+	dma_sync_single_for_device(hsotg->dev,
+				   qh->desc_list_dma +
+			(idx * sizeof(struct dwc2_dma_desc)),
+			sizeof(struct dwc2_dma_desc),
+			DMA_TO_DEVICE);
+}
+
+static void dwc2_init_isoc_dma_desc(struct dwc2_hsotg *hsotg,
+				    struct dwc2_qh *qh, u16 skip_frames)
+{
+	struct dwc2_qtd *qtd;
+	u32 max_xfer_size;
+	u16 idx, inc, n_desc = 0, ntd_max = 0;
+	u16 cur_idx;
+	u16 next_idx;
+
+	idx = qh->td_last;
+	inc = qh->host_interval;
+	hsotg->frame_number = dwc2_hcd_get_frame_number(hsotg);
+	cur_idx = dwc2_frame_list_idx(hsotg->frame_number);
+	next_idx = dwc2_desclist_idx_inc(qh->td_last, inc, qh->dev_speed);
+
+	/*
+	 * Ensure current frame number didn't overstep last scheduled
+	 * descriptor. If it happens, the only way to recover is to move
+	 * qh->td_last to current frame number + 1.
+	 * So that next isoc descriptor will be scheduled on frame number + 1
+	 * and not on a past frame.
+	 */
+	if (dwc2_frame_idx_num_gt(cur_idx, next_idx) || (cur_idx == next_idx)) {
+		if (inc < 32) {
+			dev_vdbg(hsotg->dev,
+				 "current frame number overstep last descriptor\n");
+			qh->td_last = dwc2_desclist_idx_inc(cur_idx, inc,
+							    qh->dev_speed);
+			idx = qh->td_last;
+		}
+	}
+
+	if (qh->host_interval) {
+		ntd_max = (dwc2_max_desc_num(qh) + qh->host_interval - 1) /
+				qh->host_interval;
+		if (skip_frames && !qh->channel)
+			ntd_max -= skip_frames / qh->host_interval;
+	}
+
+	max_xfer_size = qh->dev_speed == USB_SPEED_HIGH ?
+			MAX_ISOC_XFER_SIZE_HS : MAX_ISOC_XFER_SIZE_FS;
+
+	list_for_each_entry(qtd, &qh->qtd_list, qtd_list_entry) {
+		if (qtd->in_process &&
+		    qtd->isoc_frame_index_last ==
+		    qtd->urb->packet_count)
+			continue;
+
+		qtd->isoc_td_first = idx;
+		while (qh->ntd < ntd_max && qtd->isoc_frame_index_last <
+						qtd->urb->packet_count) {
+			dwc2_fill_host_isoc_dma_desc(hsotg, qtd, qh,
+						     max_xfer_size, idx);
+			idx = dwc2_desclist_idx_inc(idx, inc, qh->dev_speed);
+			n_desc++;
+		}
+		qtd->isoc_td_last = idx;
+		qtd->in_process = 1;
+	}
+
+	qh->td_last = idx;
+
+#ifdef ISOC_URB_GIVEBACK_ASAP
+	/* Set IOC for last descriptor if descriptor list is full */
+	if (qh->ntd == ntd_max) {
+		idx = dwc2_desclist_idx_dec(qh->td_last, inc, qh->dev_speed);
+		qh->desc_list[idx].status |= HOST_DMA_IOC;
+		dma_sync_single_for_device(hsotg->dev,
+					   qh->desc_list_dma + (idx *
+					   sizeof(struct dwc2_dma_desc)),
+					   sizeof(struct dwc2_dma_desc),
+					   DMA_TO_DEVICE);
+	}
+#else
+	/*
+	 * Set IOC bit only for one descriptor. Always try to be ahead of HW
+	 * processing, i.e. on IOC generation driver activates next descriptor
+	 * but core continues to process descriptors following the one with IOC
+	 * set.
+	 */
+
+	if (n_desc > DESCNUM_THRESHOLD)
+		/*
+		 * Move IOC "up". Required even if there is only one QTD
+		 * in the list, because QTDs might continue to be queued,
+		 * but during the activation it was only one queued.
+		 * Actually more than one QTD might be in the list if this
+		 * function called from XferCompletion - QTDs was queued during
+		 * HW processing of the previous descriptor chunk.
+		 */
+		idx = dwc2_desclist_idx_dec(idx, inc * ((qh->ntd + 1) / 2),
+					    qh->dev_speed);
+	else
+		/*
+		 * Set the IOC for the latest descriptor if either number of
+		 * descriptors is not greater than threshold or no more new
+		 * descriptors activated
+		 */
+		idx = dwc2_desclist_idx_dec(qh->td_last, inc, qh->dev_speed);
+
+	qh->desc_list[idx].status |= HOST_DMA_IOC;
+	dma_sync_single_for_device(hsotg->dev,
+				   qh->desc_list_dma +
+				   (idx * sizeof(struct dwc2_dma_desc)),
+				   sizeof(struct dwc2_dma_desc),
+				   DMA_TO_DEVICE);
+#endif
+}
+
+static void dwc2_fill_host_dma_desc(struct dwc2_hsotg *hsotg,
+				    struct dwc2_host_chan *chan,
+				    struct dwc2_qtd *qtd, struct dwc2_qh *qh,
+				    int n_desc)
+{
+	struct dwc2_dma_desc *dma_desc = &qh->desc_list[n_desc];
+	int len = chan->xfer_len;
+
+	if (len > HOST_DMA_NBYTES_LIMIT - (chan->max_packet - 1))
+		len = HOST_DMA_NBYTES_LIMIT - (chan->max_packet - 1);
+
+	if (chan->ep_is_in) {
+		int num_packets;
+
+		if (len > 0 && chan->max_packet)
+			num_packets = (len + chan->max_packet - 1)
+					/ chan->max_packet;
+		else
+			/* Need 1 packet for transfer length of 0 */
+			num_packets = 1;
+
+		/* Always program an integral # of packets for IN transfers */
+		len = num_packets * chan->max_packet;
+	}
+
+	dma_desc->status = len << HOST_DMA_NBYTES_SHIFT & HOST_DMA_NBYTES_MASK;
+	qh->n_bytes[n_desc] = len;
+
+	if (qh->ep_type == USB_ENDPOINT_XFER_CONTROL &&
+	    qtd->control_phase == DWC2_CONTROL_SETUP)
+		dma_desc->status |= HOST_DMA_SUP;
+
+	dma_desc->buf = (u32)chan->xfer_dma;
+
+	dma_sync_single_for_device(hsotg->dev,
+				   qh->desc_list_dma +
+				   (n_desc * sizeof(struct dwc2_dma_desc)),
+				   sizeof(struct dwc2_dma_desc),
+				   DMA_TO_DEVICE);
+
+	/*
+	 * Last (or only) descriptor of IN transfer with actual size less
+	 * than MaxPacket
+	 */
+	if (len > chan->xfer_len) {
+		chan->xfer_len = 0;
+	} else {
+		chan->xfer_dma += len;
+		chan->xfer_len -= len;
+	}
+}
+
+static void dwc2_init_non_isoc_dma_desc(struct dwc2_hsotg *hsotg,
+					struct dwc2_qh *qh)
+{
+	struct dwc2_qtd *qtd;
+	struct dwc2_host_chan *chan = qh->channel;
+	int n_desc = 0;
+
+	dev_vdbg(hsotg->dev, "%s(): qh=%p dma=%08lx len=%d\n", __func__, qh,
+		 (unsigned long)chan->xfer_dma, chan->xfer_len);
+
+	/*
+	 * Start with chan->xfer_dma initialized in assign_and_init_hc(), then
+	 * if SG transfer consists of multiple URBs, this pointer is re-assigned
+	 * to the buffer of the currently processed QTD. For non-SG request
+	 * there is always one QTD active.
+	 */
+
+	list_for_each_entry(qtd, &qh->qtd_list, qtd_list_entry) {
+		dev_vdbg(hsotg->dev, "qtd=%p\n", qtd);
+
+		if (n_desc) {
+			/* SG request - more than 1 QTD */
+			chan->xfer_dma = qtd->urb->dma +
+					qtd->urb->actual_length;
+			chan->xfer_len = qtd->urb->length -
+					qtd->urb->actual_length;
+			dev_vdbg(hsotg->dev, "buf=%08lx len=%d\n",
+				 (unsigned long)chan->xfer_dma, chan->xfer_len);
+		}
+
+		qtd->n_desc = 0;
+		do {
+			if (n_desc > 1) {
+				qh->desc_list[n_desc - 1].status |= HOST_DMA_A;
+				dev_vdbg(hsotg->dev,
+					 "set A bit in desc %d (%p)\n",
+					 n_desc - 1,
+					 &qh->desc_list[n_desc - 1]);
+				dma_sync_single_for_device(hsotg->dev,
+							   qh->desc_list_dma +
+					((n_desc - 1) *
+					sizeof(struct dwc2_dma_desc)),
+					sizeof(struct dwc2_dma_desc),
+					DMA_TO_DEVICE);
+			}
+			dwc2_fill_host_dma_desc(hsotg, chan, qtd, qh, n_desc);
+			dev_vdbg(hsotg->dev,
+				 "desc %d (%p) buf=%08x status=%08x\n",
+				 n_desc, &qh->desc_list[n_desc],
+				 qh->desc_list[n_desc].buf,
+				 qh->desc_list[n_desc].status);
+			qtd->n_desc++;
+			n_desc++;
+		} while (chan->xfer_len > 0 &&
+			 n_desc != MAX_DMA_DESC_NUM_GENERIC);
+
+		dev_vdbg(hsotg->dev, "n_desc=%d\n", n_desc);
+		qtd->in_process = 1;
+		if (qh->ep_type == USB_ENDPOINT_XFER_CONTROL)
+			break;
+		if (n_desc == MAX_DMA_DESC_NUM_GENERIC)
+			break;
+	}
+
+	if (n_desc) {
+		qh->desc_list[n_desc - 1].status |=
+				HOST_DMA_IOC | HOST_DMA_EOL | HOST_DMA_A;
+		dev_vdbg(hsotg->dev, "set IOC/EOL/A bits in desc %d (%p)\n",
+			 n_desc - 1, &qh->desc_list[n_desc - 1]);
+		dma_sync_single_for_device(hsotg->dev,
+					   qh->desc_list_dma + (n_desc - 1) *
+					   sizeof(struct dwc2_dma_desc),
+					   sizeof(struct dwc2_dma_desc),
+					   DMA_TO_DEVICE);
+		if (n_desc > 1) {
+			qh->desc_list[0].status |= HOST_DMA_A;
+			dev_vdbg(hsotg->dev, "set A bit in desc 0 (%p)\n",
+				 &qh->desc_list[0]);
+			dma_sync_single_for_device(hsotg->dev,
+						   qh->desc_list_dma,
+					sizeof(struct dwc2_dma_desc),
+					DMA_TO_DEVICE);
+		}
+		chan->ntd = n_desc;
+	}
+}
+
+/**
+ * dwc2_hcd_start_xfer_ddma() - Starts a transfer in Descriptor DMA mode
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh:    The QH to init
+ *
+ * Return: 0 if successful, negative error code otherwise
+ *
+ * For Control and Bulk endpoints, initializes descriptor list and starts the
+ * transfer. For Interrupt and Isochronous endpoints, initializes descriptor
+ * list then updates FrameList, marking appropriate entries as active.
+ *
+ * For Isochronous endpoints the starting descriptor index is calculated based
+ * on the scheduled frame, but only on the first transfer descriptor within a
+ * session. Then the transfer is started via enabling the channel.
+ *
+ * For Isochronous endpoints the channel is not halted on XferComplete
+ * interrupt so remains assigned to the endpoint(QH) until session is done.
+ */
+void dwc2_hcd_start_xfer_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	/* Channel is already assigned */
+	struct dwc2_host_chan *chan = qh->channel;
+	u16 skip_frames = 0;
+
+	switch (chan->ep_type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+	case USB_ENDPOINT_XFER_BULK:
+		dwc2_init_non_isoc_dma_desc(hsotg, qh);
+		dwc2_hc_start_transfer_ddma(hsotg, chan);
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		dwc2_init_non_isoc_dma_desc(hsotg, qh);
+		dwc2_update_frame_list(hsotg, qh, 1);
+		dwc2_hc_start_transfer_ddma(hsotg, chan);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (!qh->ntd)
+			skip_frames = dwc2_recalc_initial_desc_idx(hsotg, qh);
+		dwc2_init_isoc_dma_desc(hsotg, qh, skip_frames);
+
+		if (!chan->xfer_started) {
+			dwc2_update_frame_list(hsotg, qh, 1);
+
+			/*
+			 * Always set to max, instead of actual size. Otherwise
+			 * ntd will be changed with channel being enabled. Not
+			 * recommended.
+			 */
+			chan->ntd = dwc2_max_desc_num(qh);
+
+			/* Enable channel only once for ISOC */
+			dwc2_hc_start_transfer_ddma(hsotg, chan);
+		}
+
+		break;
+	default:
+		break;
+	}
+}
+
+#define DWC2_CMPL_DONE		1
+#define DWC2_CMPL_STOP		2
+
+static int dwc2_cmpl_host_isoc_dma_desc(struct dwc2_hsotg *hsotg,
+					struct dwc2_host_chan *chan,
+					struct dwc2_qtd *qtd,
+					struct dwc2_qh *qh, u16 idx)
+{
+	struct dwc2_dma_desc *dma_desc;
+	struct dwc2_hcd_iso_packet_desc *frame_desc;
+	u16 remain = 0;
+	int rc = 0;
+
+	if (!qtd->urb)
+		return -EINVAL;
+
+	dma_sync_single_for_cpu(hsotg->dev, qh->desc_list_dma + (idx *
+				sizeof(struct dwc2_dma_desc)),
+				sizeof(struct dwc2_dma_desc),
+				DMA_FROM_DEVICE);
+
+	dma_desc = &qh->desc_list[idx];
+
+	frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last];
+	dma_desc->buf = (u32)(qtd->urb->dma + frame_desc->offset);
+	if (chan->ep_is_in)
+		remain = (dma_desc->status & HOST_DMA_ISOC_NBYTES_MASK) >>
+			 HOST_DMA_ISOC_NBYTES_SHIFT;
+
+	if ((dma_desc->status & HOST_DMA_STS_MASK) == HOST_DMA_STS_PKTERR) {
+		/*
+		 * XactError, or unable to complete all the transactions
+		 * in the scheduled micro-frame/frame, both indicated by
+		 * HOST_DMA_STS_PKTERR
+		 */
+		qtd->urb->error_count++;
+		frame_desc->actual_length = qh->n_bytes[idx] - remain;
+		frame_desc->status = -EPROTO;
+	} else {
+		/* Success */
+		frame_desc->actual_length = qh->n_bytes[idx] - remain;
+		frame_desc->status = 0;
+	}
+
+	if (++qtd->isoc_frame_index == qtd->urb->packet_count) {
+		/*
+		 * urb->status is not used for isoc transfers here. The
+		 * individual frame_desc status are used instead.
+		 */
+		dwc2_host_complete(hsotg, qtd, 0);
+		dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
+
+		/*
+		 * This check is necessary because urb_dequeue can be called
+		 * from urb complete callback (sound driver for example). All
+		 * pending URBs are dequeued there, so no need for further
+		 * processing.
+		 */
+		if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE)
+			return -1;
+		rc = DWC2_CMPL_DONE;
+	}
+
+	qh->ntd--;
+
+	/* Stop if IOC requested descriptor reached */
+	if (dma_desc->status & HOST_DMA_IOC)
+		rc = DWC2_CMPL_STOP;
+
+	return rc;
+}
+
+static void dwc2_complete_isoc_xfer_ddma(struct dwc2_hsotg *hsotg,
+					 struct dwc2_host_chan *chan,
+					 enum dwc2_halt_status halt_status)
+{
+	struct dwc2_hcd_iso_packet_desc *frame_desc;
+	struct dwc2_qtd *qtd, *qtd_tmp;
+	struct dwc2_qh *qh;
+	u16 idx;
+	int rc;
+
+	qh = chan->qh;
+	idx = qh->td_first;
+
+	if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE) {
+		list_for_each_entry(qtd, &qh->qtd_list, qtd_list_entry)
+			qtd->in_process = 0;
+		return;
+	}
+
+	if (halt_status == DWC2_HC_XFER_AHB_ERR ||
+	    halt_status == DWC2_HC_XFER_BABBLE_ERR) {
+		/*
+		 * Channel is halted in these error cases, considered as serious
+		 * issues.
+		 * Complete all URBs marking all frames as failed, irrespective
+		 * whether some of the descriptors (frames) succeeded or not.
+		 * Pass error code to completion routine as well, to update
+		 * urb->status, some of class drivers might use it to stop
+		 * queing transfer requests.
+		 */
+		int err = halt_status == DWC2_HC_XFER_AHB_ERR ?
+			  -EIO : -EOVERFLOW;
+
+		list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list,
+					 qtd_list_entry) {
+			if (qtd->urb) {
+				for (idx = 0; idx < qtd->urb->packet_count;
+				     idx++) {
+					frame_desc = &qtd->urb->iso_descs[idx];
+					frame_desc->status = err;
+				}
+
+				dwc2_host_complete(hsotg, qtd, err);
+			}
+
+			dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
+		}
+
+		return;
+	}
+
+	list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) {
+		if (!qtd->in_process)
+			break;
+
+		/*
+		 * Ensure idx corresponds to descriptor where first urb of this
+		 * qtd was added. In fact, during isoc desc init, dwc2 may skip
+		 * an index if current frame number is already over this index.
+		 */
+		if (idx != qtd->isoc_td_first) {
+			dev_vdbg(hsotg->dev,
+				 "try to complete %d instead of %d\n",
+				 idx, qtd->isoc_td_first);
+			idx = qtd->isoc_td_first;
+		}
+
+		do {
+			struct dwc2_qtd *qtd_next;
+			u16 cur_idx;
+
+			rc = dwc2_cmpl_host_isoc_dma_desc(hsotg, chan, qtd, qh,
+							  idx);
+			if (rc < 0)
+				return;
+			idx = dwc2_desclist_idx_inc(idx, qh->host_interval,
+						    chan->speed);
+			if (!rc)
+				continue;
+
+			if (rc == DWC2_CMPL_DONE)
+				break;
+
+			/* rc == DWC2_CMPL_STOP */
+
+			if (qh->host_interval >= 32)
+				goto stop_scan;
+
+			qh->td_first = idx;
+			cur_idx = dwc2_frame_list_idx(hsotg->frame_number);
+			qtd_next = list_first_entry(&qh->qtd_list,
+						    struct dwc2_qtd,
+						    qtd_list_entry);
+			if (dwc2_frame_idx_num_gt(cur_idx,
+						  qtd_next->isoc_td_last))
+				break;
+
+			goto stop_scan;
+
+		} while (idx != qh->td_first);
+	}
+
+stop_scan:
+	qh->td_first = idx;
+}
+
+static int dwc2_update_non_isoc_urb_state_ddma(struct dwc2_hsotg *hsotg,
+					       struct dwc2_host_chan *chan,
+					struct dwc2_qtd *qtd,
+					struct dwc2_dma_desc *dma_desc,
+					enum dwc2_halt_status halt_status,
+					u32 n_bytes, int *xfer_done)
+{
+	struct dwc2_hcd_urb *urb = qtd->urb;
+	u16 remain = 0;
+
+	if (chan->ep_is_in)
+		remain = (dma_desc->status & HOST_DMA_NBYTES_MASK) >>
+			 HOST_DMA_NBYTES_SHIFT;
+
+	dev_vdbg(hsotg->dev, "remain=%d dwc2_urb=%p\n", remain, urb);
+
+	if (halt_status == DWC2_HC_XFER_AHB_ERR) {
+		dev_err(hsotg->dev, "EIO\n");
+		urb->status = -EIO;
+		return 1;
+	}
+
+	if ((dma_desc->status & HOST_DMA_STS_MASK) == HOST_DMA_STS_PKTERR) {
+		switch (halt_status) {
+		case DWC2_HC_XFER_STALL:
+			dev_vdbg(hsotg->dev, "Stall\n");
+			urb->status = -EPIPE;
+			break;
+		case DWC2_HC_XFER_BABBLE_ERR:
+			dev_err(hsotg->dev, "Babble\n");
+			urb->status = -EOVERFLOW;
+			break;
+		case DWC2_HC_XFER_XACT_ERR:
+			dev_err(hsotg->dev, "XactErr\n");
+			urb->status = -EPROTO;
+			break;
+		default:
+			dev_err(hsotg->dev,
+				"%s: Unhandled descriptor error status (%d)\n",
+				__func__, halt_status);
+			break;
+		}
+		return 1;
+	}
+
+	if (dma_desc->status & HOST_DMA_A) {
+		dev_vdbg(hsotg->dev,
+			 "Active descriptor encountered on channel %d\n",
+			 chan->hc_num);
+		return 0;
+	}
+
+	if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL) {
+		if (qtd->control_phase == DWC2_CONTROL_DATA) {
+			urb->actual_length += n_bytes - remain;
+			if (remain || urb->actual_length >= urb->length) {
+				/*
+				 * For Control Data stage do not set urb->status
+				 * to 0, to prevent URB callback. Set it when
+				 * Status phase is done. See below.
+				 */
+				*xfer_done = 1;
+			}
+		} else if (qtd->control_phase == DWC2_CONTROL_STATUS) {
+			urb->status = 0;
+			*xfer_done = 1;
+		}
+		/* No handling for SETUP stage */
+	} else {
+		/* BULK and INTR */
+		urb->actual_length += n_bytes - remain;
+		dev_vdbg(hsotg->dev, "length=%d actual=%d\n", urb->length,
+			 urb->actual_length);
+		if (remain || urb->actual_length >= urb->length) {
+			urb->status = 0;
+			*xfer_done = 1;
+		}
+	}
+
+	return 0;
+}
+
+static int dwc2_process_non_isoc_desc(struct dwc2_hsotg *hsotg,
+				      struct dwc2_host_chan *chan,
+				      int chnum, struct dwc2_qtd *qtd,
+				      int desc_num,
+				      enum dwc2_halt_status halt_status,
+				      int *xfer_done)
+{
+	struct dwc2_qh *qh = chan->qh;
+	struct dwc2_hcd_urb *urb = qtd->urb;
+	struct dwc2_dma_desc *dma_desc;
+	u32 n_bytes;
+	int failed;
+
+	dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	if (!urb)
+		return -EINVAL;
+
+	dma_sync_single_for_cpu(hsotg->dev,
+				qh->desc_list_dma + (desc_num *
+				sizeof(struct dwc2_dma_desc)),
+				sizeof(struct dwc2_dma_desc),
+				DMA_FROM_DEVICE);
+
+	dma_desc = &qh->desc_list[desc_num];
+	n_bytes = qh->n_bytes[desc_num];
+	dev_vdbg(hsotg->dev,
+		 "qtd=%p dwc2_urb=%p desc_num=%d desc=%p n_bytes=%d\n",
+		 qtd, urb, desc_num, dma_desc, n_bytes);
+	failed = dwc2_update_non_isoc_urb_state_ddma(hsotg, chan, qtd, dma_desc,
+						     halt_status, n_bytes,
+						     xfer_done);
+	if (failed || (*xfer_done && urb->status != -EINPROGRESS)) {
+		dwc2_host_complete(hsotg, qtd, urb->status);
+		dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
+		dev_vdbg(hsotg->dev, "failed=%1x xfer_done=%1x\n",
+			 failed, *xfer_done);
+		return failed;
+	}
+
+	if (qh->ep_type == USB_ENDPOINT_XFER_CONTROL) {
+		switch (qtd->control_phase) {
+		case DWC2_CONTROL_SETUP:
+			if (urb->length > 0)
+				qtd->control_phase = DWC2_CONTROL_DATA;
+			else
+				qtd->control_phase = DWC2_CONTROL_STATUS;
+			dev_vdbg(hsotg->dev,
+				 "  Control setup transaction done\n");
+			break;
+		case DWC2_CONTROL_DATA:
+			if (*xfer_done) {
+				qtd->control_phase = DWC2_CONTROL_STATUS;
+				dev_vdbg(hsotg->dev,
+					 "  Control data transfer done\n");
+			} else if (desc_num + 1 == qtd->n_desc) {
+				/*
+				 * Last descriptor for Control data stage which
+				 * is not completed yet
+				 */
+				dwc2_hcd_save_data_toggle(hsotg, chan, chnum,
+							  qtd);
+			}
+			break;
+		default:
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static void dwc2_complete_non_isoc_xfer_ddma(struct dwc2_hsotg *hsotg,
+					     struct dwc2_host_chan *chan,
+					     int chnum,
+					     enum dwc2_halt_status halt_status)
+{
+	struct list_head *qtd_item, *qtd_tmp;
+	struct dwc2_qh *qh = chan->qh;
+	struct dwc2_qtd *qtd = NULL;
+	int xfer_done;
+	int desc_num = 0;
+
+	if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE) {
+		list_for_each_entry(qtd, &qh->qtd_list, qtd_list_entry)
+			qtd->in_process = 0;
+		return;
+	}
+
+	list_for_each_safe(qtd_item, qtd_tmp, &qh->qtd_list) {
+		int i;
+		int qtd_desc_count;
+
+		qtd = list_entry(qtd_item, struct dwc2_qtd, qtd_list_entry);
+		xfer_done = 0;
+		qtd_desc_count = qtd->n_desc;
+
+		for (i = 0; i < qtd_desc_count; i++) {
+			if (dwc2_process_non_isoc_desc(hsotg, chan, chnum, qtd,
+						       desc_num, halt_status,
+						       &xfer_done)) {
+				qtd = NULL;
+				goto stop_scan;
+			}
+
+			desc_num++;
+		}
+	}
+
+stop_scan:
+	if (qh->ep_type != USB_ENDPOINT_XFER_CONTROL) {
+		/*
+		 * Resetting the data toggle for bulk and interrupt endpoints
+		 * in case of stall. See handle_hc_stall_intr().
+		 */
+		if (halt_status == DWC2_HC_XFER_STALL)
+			qh->data_toggle = DWC2_HC_PID_DATA0;
+		else
+			dwc2_hcd_save_data_toggle(hsotg, chan, chnum, NULL);
+	}
+
+	if (halt_status == DWC2_HC_XFER_COMPLETE) {
+		if (chan->hcint & HCINTMSK_NYET) {
+			/*
+			 * Got a NYET on the last transaction of the transfer.
+			 * It means that the endpoint should be in the PING
+			 * state at the beginning of the next transfer.
+			 */
+			qh->ping_state = 1;
+		}
+	}
+}
+
+/**
+ * dwc2_hcd_complete_xfer_ddma() - Scans the descriptor list, updates URB's
+ * status and calls completion routine for the URB if it's done. Called from
+ * interrupt handlers.
+ *
+ * @hsotg:       The HCD state structure for the DWC OTG controller
+ * @chan:        Host channel the transfer is completed on
+ * @chnum:       Index of Host channel registers
+ * @halt_status: Reason the channel is being halted or just XferComplete
+ *               for isochronous transfers
+ *
+ * Releases the channel to be used by other transfers.
+ * In case of Isochronous endpoint the channel is not halted until the end of
+ * the session, i.e. QTD list is empty.
+ * If periodic channel released the FrameList is updated accordingly.
+ * Calls transaction selection routines to activate pending transfers.
+ */
+void dwc2_hcd_complete_xfer_ddma(struct dwc2_hsotg *hsotg,
+				 struct dwc2_host_chan *chan, int chnum,
+				 enum dwc2_halt_status halt_status)
+{
+	struct dwc2_qh *qh = chan->qh;
+	int continue_isoc_xfer = 0;
+	enum dwc2_transaction_type tr_type;
+
+	if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+		dwc2_complete_isoc_xfer_ddma(hsotg, chan, halt_status);
+
+		/* Release the channel if halted or session completed */
+		if (halt_status != DWC2_HC_XFER_COMPLETE ||
+		    list_empty(&qh->qtd_list)) {
+			struct dwc2_qtd *qtd, *qtd_tmp;
+
+			/*
+			 * Kill all remainings QTDs since channel has been
+			 * halted.
+			 */
+			list_for_each_entry_safe(qtd, qtd_tmp,
+						 &qh->qtd_list,
+						 qtd_list_entry) {
+				dwc2_host_complete(hsotg, qtd,
+						   -ECONNRESET);
+				dwc2_hcd_qtd_unlink_and_free(hsotg,
+							     qtd, qh);
+			}
+
+			/* Halt the channel if session completed */
+			if (halt_status == DWC2_HC_XFER_COMPLETE)
+				dwc2_hc_halt(hsotg, chan, halt_status);
+			dwc2_release_channel_ddma(hsotg, qh);
+			dwc2_hcd_qh_unlink(hsotg, qh);
+		} else {
+			/* Keep in assigned schedule to continue transfer */
+			list_move_tail(&qh->qh_list_entry,
+				       &hsotg->periodic_sched_assigned);
+			/*
+			 * If channel has been halted during giveback of urb
+			 * then prevent any new scheduling.
+			 */
+			if (!chan->halt_status)
+				continue_isoc_xfer = 1;
+		}
+		/*
+		 * Todo: Consider the case when period exceeds FrameList size.
+		 * Frame Rollover interrupt should be used.
+		 */
+	} else {
+		/*
+		 * Scan descriptor list to complete the URB(s), then release
+		 * the channel
+		 */
+		dwc2_complete_non_isoc_xfer_ddma(hsotg, chan, chnum,
+						 halt_status);
+		dwc2_release_channel_ddma(hsotg, qh);
+		dwc2_hcd_qh_unlink(hsotg, qh);
+
+		if (!list_empty(&qh->qtd_list)) {
+			/*
+			 * Add back to inactive non-periodic schedule on normal
+			 * completion
+			 */
+			dwc2_hcd_qh_add(hsotg, qh);
+		}
+	}
+
+	tr_type = dwc2_hcd_select_transactions(hsotg);
+	if (tr_type != DWC2_TRANSACTION_NONE || continue_isoc_xfer) {
+		if (continue_isoc_xfer) {
+			if (tr_type == DWC2_TRANSACTION_NONE)
+				tr_type = DWC2_TRANSACTION_PERIODIC;
+			else if (tr_type == DWC2_TRANSACTION_NON_PERIODIC)
+				tr_type = DWC2_TRANSACTION_ALL;
+		}
+		dwc2_hcd_queue_transactions(hsotg, tr_type);
+	}
+}
diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
new file mode 100644
index 000000000..9e85cbb0c
--- /dev/null
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -0,0 +1,2264 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * hcd_intr.c - DesignWare HS OTG Controller host-mode interrupt handling
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ */
+
+/*
+ * This file contains the interrupt handlers for Host mode
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+
+#include "core.h"
+#include "hcd.h"
+
+/*
+ * If we get this many NAKs on a split transaction we'll slow down
+ * retransmission.  A 1 here means delay after the first NAK.
+ */
+#define DWC2_NAKS_BEFORE_DELAY		3
+
+/* This function is for debug only */
+static void dwc2_track_missed_sofs(struct dwc2_hsotg *hsotg)
+{
+	u16 curr_frame_number = hsotg->frame_number;
+	u16 expected = dwc2_frame_num_inc(hsotg->last_frame_num, 1);
+
+	if (expected != curr_frame_number)
+		dwc2_sch_vdbg(hsotg, "MISSED SOF %04x != %04x\n",
+			      expected, curr_frame_number);
+
+#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
+	if (hsotg->frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
+		if (expected != curr_frame_number) {
+			hsotg->frame_num_array[hsotg->frame_num_idx] =
+					curr_frame_number;
+			hsotg->last_frame_num_array[hsotg->frame_num_idx] =
+					hsotg->last_frame_num;
+			hsotg->frame_num_idx++;
+		}
+	} else if (!hsotg->dumped_frame_num_array) {
+		int i;
+
+		dev_info(hsotg->dev, "Frame     Last Frame\n");
+		dev_info(hsotg->dev, "-----     ----------\n");
+		for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
+			dev_info(hsotg->dev, "0x%04x    0x%04x\n",
+				 hsotg->frame_num_array[i],
+				 hsotg->last_frame_num_array[i]);
+		}
+		hsotg->dumped_frame_num_array = 1;
+	}
+#endif
+	hsotg->last_frame_num = curr_frame_number;
+}
+
+static void dwc2_hc_handle_tt_clear(struct dwc2_hsotg *hsotg,
+				    struct dwc2_host_chan *chan,
+				    struct dwc2_qtd *qtd)
+{
+	struct usb_device *root_hub = dwc2_hsotg_to_hcd(hsotg)->self.root_hub;
+	struct urb *usb_urb;
+
+	if (!chan->qh)
+		return;
+
+	if (chan->qh->dev_speed == USB_SPEED_HIGH)
+		return;
+
+	if (!qtd->urb)
+		return;
+
+	usb_urb = qtd->urb->priv;
+	if (!usb_urb || !usb_urb->dev || !usb_urb->dev->tt)
+		return;
+
+	/*
+	 * The root hub doesn't really have a TT, but Linux thinks it
+	 * does because how could you have a "high speed hub" that
+	 * directly talks directly to low speed devices without a TT?
+	 * It's all lies.  Lies, I tell you.
+	 */
+	if (usb_urb->dev->tt->hub == root_hub)
+		return;
+
+	if (qtd->urb->status != -EPIPE && qtd->urb->status != -EREMOTEIO) {
+		chan->qh->tt_buffer_dirty = 1;
+		if (usb_hub_clear_tt_buffer(usb_urb))
+			/* Clear failed; let's hope things work anyway */
+			chan->qh->tt_buffer_dirty = 0;
+	}
+}
+
+/*
+ * Handles the start-of-frame interrupt in host mode. Non-periodic
+ * transactions may be queued to the DWC_otg controller for the current
+ * (micro)frame. Periodic transactions may be queued to the controller
+ * for the next (micro)frame.
+ */
+static void dwc2_sof_intr(struct dwc2_hsotg *hsotg)
+{
+	struct list_head *qh_entry;
+	struct dwc2_qh *qh;
+	enum dwc2_transaction_type tr_type;
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_SOF, GINTSTS);
+
+#ifdef DEBUG_SOF
+	dev_vdbg(hsotg->dev, "--Start of Frame Interrupt--\n");
+#endif
+
+	hsotg->frame_number = dwc2_hcd_get_frame_number(hsotg);
+
+	dwc2_track_missed_sofs(hsotg);
+
+	/* Determine whether any periodic QHs should be executed */
+	qh_entry = hsotg->periodic_sched_inactive.next;
+	while (qh_entry != &hsotg->periodic_sched_inactive) {
+		qh = list_entry(qh_entry, struct dwc2_qh, qh_list_entry);
+		qh_entry = qh_entry->next;
+		if (dwc2_frame_num_le(qh->next_active_frame,
+				      hsotg->frame_number)) {
+			dwc2_sch_vdbg(hsotg, "QH=%p ready fn=%04x, nxt=%04x\n",
+				      qh, hsotg->frame_number,
+				      qh->next_active_frame);
+
+			/*
+			 * Move QH to the ready list to be executed next
+			 * (micro)frame
+			 */
+			list_move_tail(&qh->qh_list_entry,
+				       &hsotg->periodic_sched_ready);
+		}
+	}
+	tr_type = dwc2_hcd_select_transactions(hsotg);
+	if (tr_type != DWC2_TRANSACTION_NONE)
+		dwc2_hcd_queue_transactions(hsotg, tr_type);
+}
+
+/*
+ * Handles the Rx FIFO Level Interrupt, which indicates that there is
+ * at least one packet in the Rx FIFO. The packets are moved from the FIFO to
+ * memory if the DWC_otg controller is operating in Slave mode.
+ */
+static void dwc2_rx_fifo_level_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 grxsts, chnum, bcnt, dpid, pktsts;
+	struct dwc2_host_chan *chan;
+
+	if (dbg_perio())
+		dev_vdbg(hsotg->dev, "--RxFIFO Level Interrupt--\n");
+
+	grxsts = dwc2_readl(hsotg, GRXSTSP);
+	chnum = (grxsts & GRXSTS_HCHNUM_MASK) >> GRXSTS_HCHNUM_SHIFT;
+	chan = hsotg->hc_ptr_array[chnum];
+	if (!chan) {
+		dev_err(hsotg->dev, "Unable to get corresponding channel\n");
+		return;
+	}
+
+	bcnt = (grxsts & GRXSTS_BYTECNT_MASK) >> GRXSTS_BYTECNT_SHIFT;
+	dpid = (grxsts & GRXSTS_DPID_MASK) >> GRXSTS_DPID_SHIFT;
+	pktsts = (grxsts & GRXSTS_PKTSTS_MASK) >> GRXSTS_PKTSTS_SHIFT;
+
+	/* Packet Status */
+	if (dbg_perio()) {
+		dev_vdbg(hsotg->dev, "    Ch num = %d\n", chnum);
+		dev_vdbg(hsotg->dev, "    Count = %d\n", bcnt);
+		dev_vdbg(hsotg->dev, "    DPID = %d, chan.dpid = %d\n", dpid,
+			 chan->data_pid_start);
+		dev_vdbg(hsotg->dev, "    PStatus = %d\n", pktsts);
+	}
+
+	switch (pktsts) {
+	case GRXSTS_PKTSTS_HCHIN:
+		/* Read the data into the host buffer */
+		if (bcnt > 0) {
+			dwc2_read_packet(hsotg, chan->xfer_buf, bcnt);
+
+			/* Update the HC fields for the next packet received */
+			chan->xfer_count += bcnt;
+			chan->xfer_buf += bcnt;
+		}
+		break;
+	case GRXSTS_PKTSTS_HCHIN_XFER_COMP:
+	case GRXSTS_PKTSTS_DATATOGGLEERR:
+	case GRXSTS_PKTSTS_HCHHALTED:
+		/* Handled in interrupt, just ignore data */
+		break;
+	default:
+		dev_err(hsotg->dev,
+			"RxFIFO Level Interrupt: Unknown status %d\n", pktsts);
+		break;
+	}
+}
+
+/*
+ * This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
+ * data packets may be written to the FIFO for OUT transfers. More requests
+ * may be written to the non-periodic request queue for IN transfers. This
+ * interrupt is enabled only in Slave mode.
+ */
+static void dwc2_np_tx_fifo_empty_intr(struct dwc2_hsotg *hsotg)
+{
+	dev_vdbg(hsotg->dev, "--Non-Periodic TxFIFO Empty Interrupt--\n");
+	dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_NON_PERIODIC);
+}
+
+/*
+ * This interrupt occurs when the periodic Tx FIFO is half-empty. More data
+ * packets may be written to the FIFO for OUT transfers. More requests may be
+ * written to the periodic request queue for IN transfers. This interrupt is
+ * enabled only in Slave mode.
+ */
+static void dwc2_perio_tx_fifo_empty_intr(struct dwc2_hsotg *hsotg)
+{
+	if (dbg_perio())
+		dev_vdbg(hsotg->dev, "--Periodic TxFIFO Empty Interrupt--\n");
+	dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_PERIODIC);
+}
+
+static void dwc2_hprt0_enable(struct dwc2_hsotg *hsotg, u32 hprt0,
+			      u32 *hprt0_modify)
+{
+	struct dwc2_core_params *params = &hsotg->params;
+	int do_reset = 0;
+	u32 usbcfg;
+	u32 prtspd;
+	u32 hcfg;
+	u32 fslspclksel;
+	u32 hfir;
+
+	dev_vdbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
+
+	/* Every time when port enables calculate HFIR.FrInterval */
+	hfir = dwc2_readl(hsotg, HFIR);
+	hfir &= ~HFIR_FRINT_MASK;
+	hfir |= dwc2_calc_frame_interval(hsotg) << HFIR_FRINT_SHIFT &
+		HFIR_FRINT_MASK;
+	dwc2_writel(hsotg, hfir, HFIR);
+
+	/* Check if we need to adjust the PHY clock speed for low power */
+	if (!params->host_support_fs_ls_low_power) {
+		/* Port has been enabled, set the reset change flag */
+		hsotg->flags.b.port_reset_change = 1;
+		return;
+	}
+
+	usbcfg = dwc2_readl(hsotg, GUSBCFG);
+	prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
+
+	if (prtspd == HPRT0_SPD_LOW_SPEED || prtspd == HPRT0_SPD_FULL_SPEED) {
+		/* Low power */
+		if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL)) {
+			/* Set PHY low power clock select for FS/LS devices */
+			usbcfg |= GUSBCFG_PHY_LP_CLK_SEL;
+			dwc2_writel(hsotg, usbcfg, GUSBCFG);
+			do_reset = 1;
+		}
+
+		hcfg = dwc2_readl(hsotg, HCFG);
+		fslspclksel = (hcfg & HCFG_FSLSPCLKSEL_MASK) >>
+			      HCFG_FSLSPCLKSEL_SHIFT;
+
+		if (prtspd == HPRT0_SPD_LOW_SPEED &&
+		    params->host_ls_low_power_phy_clk) {
+			/* 6 MHZ */
+			dev_vdbg(hsotg->dev,
+				 "FS_PHY programming HCFG to 6 MHz\n");
+			if (fslspclksel != HCFG_FSLSPCLKSEL_6_MHZ) {
+				fslspclksel = HCFG_FSLSPCLKSEL_6_MHZ;
+				hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
+				hcfg |= fslspclksel << HCFG_FSLSPCLKSEL_SHIFT;
+				dwc2_writel(hsotg, hcfg, HCFG);
+				do_reset = 1;
+			}
+		} else {
+			/* 48 MHZ */
+			dev_vdbg(hsotg->dev,
+				 "FS_PHY programming HCFG to 48 MHz\n");
+			if (fslspclksel != HCFG_FSLSPCLKSEL_48_MHZ) {
+				fslspclksel = HCFG_FSLSPCLKSEL_48_MHZ;
+				hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
+				hcfg |= fslspclksel << HCFG_FSLSPCLKSEL_SHIFT;
+				dwc2_writel(hsotg, hcfg, HCFG);
+				do_reset = 1;
+			}
+		}
+	} else {
+		/* Not low power */
+		if (usbcfg & GUSBCFG_PHY_LP_CLK_SEL) {
+			usbcfg &= ~GUSBCFG_PHY_LP_CLK_SEL;
+			dwc2_writel(hsotg, usbcfg, GUSBCFG);
+			do_reset = 1;
+		}
+	}
+
+	if (do_reset) {
+		*hprt0_modify |= HPRT0_RST;
+		dwc2_writel(hsotg, *hprt0_modify, HPRT0);
+		queue_delayed_work(hsotg->wq_otg, &hsotg->reset_work,
+				   msecs_to_jiffies(60));
+	} else {
+		/* Port has been enabled, set the reset change flag */
+		hsotg->flags.b.port_reset_change = 1;
+	}
+}
+
+/*
+ * There are multiple conditions that can cause a port interrupt. This function
+ * determines which interrupt conditions have occurred and handles them
+ * appropriately.
+ */
+static void dwc2_port_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 hprt0;
+	u32 hprt0_modify;
+
+	dev_vdbg(hsotg->dev, "--Port Interrupt--\n");
+
+	hprt0 = dwc2_readl(hsotg, HPRT0);
+	hprt0_modify = hprt0;
+
+	/*
+	 * Clear appropriate bits in HPRT0 to clear the interrupt bit in
+	 * GINTSTS
+	 */
+	hprt0_modify &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG |
+			  HPRT0_OVRCURRCHG);
+
+	/*
+	 * Port Connect Detected
+	 * Set flag and clear if detected
+	 */
+	if (hprt0 & HPRT0_CONNDET) {
+		dwc2_writel(hsotg, hprt0_modify | HPRT0_CONNDET, HPRT0);
+
+		dev_vdbg(hsotg->dev,
+			 "--Port Interrupt HPRT0=0x%08x Port Connect Detected--\n",
+			 hprt0);
+		dwc2_hcd_connect(hsotg);
+
+		/*
+		 * The Hub driver asserts a reset when it sees port connect
+		 * status change flag
+		 */
+	}
+
+	/*
+	 * Port Enable Changed
+	 * Clear if detected - Set internal flag if disabled
+	 */
+	if (hprt0 & HPRT0_ENACHG) {
+		dwc2_writel(hsotg, hprt0_modify | HPRT0_ENACHG, HPRT0);
+		dev_vdbg(hsotg->dev,
+			 "  --Port Interrupt HPRT0=0x%08x Port Enable Changed (now %d)--\n",
+			 hprt0, !!(hprt0 & HPRT0_ENA));
+		if (hprt0 & HPRT0_ENA) {
+			hsotg->new_connection = true;
+			dwc2_hprt0_enable(hsotg, hprt0, &hprt0_modify);
+		} else {
+			hsotg->flags.b.port_enable_change = 1;
+			if (hsotg->params.dma_desc_fs_enable) {
+				u32 hcfg;
+
+				hsotg->params.dma_desc_enable = false;
+				hsotg->new_connection = false;
+				hcfg = dwc2_readl(hsotg, HCFG);
+				hcfg &= ~HCFG_DESCDMA;
+				dwc2_writel(hsotg, hcfg, HCFG);
+			}
+		}
+	}
+
+	/* Overcurrent Change Interrupt */
+	if (hprt0 & HPRT0_OVRCURRCHG) {
+		dwc2_writel(hsotg, hprt0_modify | HPRT0_OVRCURRCHG,
+			    HPRT0);
+		dev_vdbg(hsotg->dev,
+			 "  --Port Interrupt HPRT0=0x%08x Port Overcurrent Changed--\n",
+			 hprt0);
+		hsotg->flags.b.port_over_current_change = 1;
+	}
+}
+
+/*
+ * Gets the actual length of a transfer after the transfer halts. halt_status
+ * holds the reason for the halt.
+ *
+ * For IN transfers where halt_status is DWC2_HC_XFER_COMPLETE, *short_read
+ * is set to 1 upon return if less than the requested number of bytes were
+ * transferred. short_read may also be NULL on entry, in which case it remains
+ * unchanged.
+ */
+static u32 dwc2_get_actual_xfer_length(struct dwc2_hsotg *hsotg,
+				       struct dwc2_host_chan *chan, int chnum,
+				       struct dwc2_qtd *qtd,
+				       enum dwc2_halt_status halt_status,
+				       int *short_read)
+{
+	u32 hctsiz, count, length;
+
+	hctsiz = dwc2_readl(hsotg, HCTSIZ(chnum));
+
+	if (halt_status == DWC2_HC_XFER_COMPLETE) {
+		if (chan->ep_is_in) {
+			count = (hctsiz & TSIZ_XFERSIZE_MASK) >>
+				TSIZ_XFERSIZE_SHIFT;
+			length = chan->xfer_len - count;
+			if (short_read)
+				*short_read = (count != 0);
+		} else if (chan->qh->do_split) {
+			length = qtd->ssplit_out_xfer_count;
+		} else {
+			length = chan->xfer_len;
+		}
+	} else {
+		/*
+		 * Must use the hctsiz.pktcnt field to determine how much data
+		 * has been transferred. This field reflects the number of
+		 * packets that have been transferred via the USB. This is
+		 * always an integral number of packets if the transfer was
+		 * halted before its normal completion. (Can't use the
+		 * hctsiz.xfersize field because that reflects the number of
+		 * bytes transferred via the AHB, not the USB).
+		 */
+		count = (hctsiz & TSIZ_PKTCNT_MASK) >> TSIZ_PKTCNT_SHIFT;
+		length = (chan->start_pkt_count - count) * chan->max_packet;
+	}
+
+	return length;
+}
+
+/**
+ * dwc2_update_urb_state() - Updates the state of the URB after a Transfer
+ * Complete interrupt on the host channel. Updates the actual_length field
+ * of the URB based on the number of bytes transferred via the host channel.
+ * Sets the URB status if the data transfer is finished.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @chan: Programming view of host channel
+ * @chnum: Channel number
+ * @urb: Processing URB
+ * @qtd: Queue transfer descriptor
+ *
+ * Return: 1 if the data transfer specified by the URB is completely finished,
+ * 0 otherwise
+ */
+static int dwc2_update_urb_state(struct dwc2_hsotg *hsotg,
+				 struct dwc2_host_chan *chan, int chnum,
+				 struct dwc2_hcd_urb *urb,
+				 struct dwc2_qtd *qtd)
+{
+	u32 hctsiz;
+	int xfer_done = 0;
+	int short_read = 0;
+	int xfer_length = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd,
+						      DWC2_HC_XFER_COMPLETE,
+						      &short_read);
+
+	if (urb->actual_length + xfer_length > urb->length) {
+		dev_dbg(hsotg->dev, "%s(): trimming xfer length\n", __func__);
+		xfer_length = urb->length - urb->actual_length;
+	}
+
+	dev_vdbg(hsotg->dev, "urb->actual_length=%d xfer_length=%d\n",
+		 urb->actual_length, xfer_length);
+	urb->actual_length += xfer_length;
+
+	if (xfer_length && chan->ep_type == USB_ENDPOINT_XFER_BULK &&
+	    (urb->flags & URB_SEND_ZERO_PACKET) &&
+	    urb->actual_length >= urb->length &&
+	    !(urb->length % chan->max_packet)) {
+		xfer_done = 0;
+	} else if (short_read || urb->actual_length >= urb->length) {
+		xfer_done = 1;
+		urb->status = 0;
+	}
+
+	hctsiz = dwc2_readl(hsotg, HCTSIZ(chnum));
+	dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n",
+		 __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum);
+	dev_vdbg(hsotg->dev, "  chan->xfer_len %d\n", chan->xfer_len);
+	dev_vdbg(hsotg->dev, "  hctsiz.xfersize %d\n",
+		 (hctsiz & TSIZ_XFERSIZE_MASK) >> TSIZ_XFERSIZE_SHIFT);
+	dev_vdbg(hsotg->dev, "  urb->transfer_buffer_length %d\n", urb->length);
+	dev_vdbg(hsotg->dev, "  urb->actual_length %d\n", urb->actual_length);
+	dev_vdbg(hsotg->dev, "  short_read %d, xfer_done %d\n", short_read,
+		 xfer_done);
+
+	return xfer_done;
+}
+
+/*
+ * Save the starting data toggle for the next transfer. The data toggle is
+ * saved in the QH for non-control transfers and it's saved in the QTD for
+ * control transfers.
+ */
+void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg,
+			       struct dwc2_host_chan *chan, int chnum,
+			       struct dwc2_qtd *qtd)
+{
+	u32 hctsiz = dwc2_readl(hsotg, HCTSIZ(chnum));
+	u32 pid = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT;
+
+	if (chan->ep_type != USB_ENDPOINT_XFER_CONTROL) {
+		if (WARN(!chan || !chan->qh,
+			 "chan->qh must be specified for non-control eps\n"))
+			return;
+
+		if (pid == TSIZ_SC_MC_PID_DATA0)
+			chan->qh->data_toggle = DWC2_HC_PID_DATA0;
+		else
+			chan->qh->data_toggle = DWC2_HC_PID_DATA1;
+	} else {
+		if (WARN(!qtd,
+			 "qtd must be specified for control eps\n"))
+			return;
+
+		if (pid == TSIZ_SC_MC_PID_DATA0)
+			qtd->data_toggle = DWC2_HC_PID_DATA0;
+		else
+			qtd->data_toggle = DWC2_HC_PID_DATA1;
+	}
+}
+
+/**
+ * dwc2_update_isoc_urb_state() - Updates the state of an Isochronous URB when
+ * the transfer is stopped for any reason. The fields of the current entry in
+ * the frame descriptor array are set based on the transfer state and the input
+ * halt_status. Completes the Isochronous URB if all the URB frames have been
+ * completed.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @chan: Programming view of host channel
+ * @chnum: Channel number
+ * @halt_status: Reason for halting a host channel
+ * @qtd: Queue transfer descriptor
+ *
+ * Return: DWC2_HC_XFER_COMPLETE if there are more frames remaining to be
+ * transferred in the URB. Otherwise return DWC2_HC_XFER_URB_COMPLETE.
+ */
+static enum dwc2_halt_status dwc2_update_isoc_urb_state(
+		struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
+		int chnum, struct dwc2_qtd *qtd,
+		enum dwc2_halt_status halt_status)
+{
+	struct dwc2_hcd_iso_packet_desc *frame_desc;
+	struct dwc2_hcd_urb *urb = qtd->urb;
+
+	if (!urb)
+		return DWC2_HC_XFER_NO_HALT_STATUS;
+
+	frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
+
+	switch (halt_status) {
+	case DWC2_HC_XFER_COMPLETE:
+		frame_desc->status = 0;
+		frame_desc->actual_length = dwc2_get_actual_xfer_length(hsotg,
+					chan, chnum, qtd, halt_status, NULL);
+		break;
+	case DWC2_HC_XFER_FRAME_OVERRUN:
+		urb->error_count++;
+		if (chan->ep_is_in)
+			frame_desc->status = -ENOSR;
+		else
+			frame_desc->status = -ECOMM;
+		frame_desc->actual_length = 0;
+		break;
+	case DWC2_HC_XFER_BABBLE_ERR:
+		urb->error_count++;
+		frame_desc->status = -EOVERFLOW;
+		/* Don't need to update actual_length in this case */
+		break;
+	case DWC2_HC_XFER_XACT_ERR:
+		urb->error_count++;
+		frame_desc->status = -EPROTO;
+		frame_desc->actual_length = dwc2_get_actual_xfer_length(hsotg,
+					chan, chnum, qtd, halt_status, NULL);
+
+		/* Skip whole frame */
+		if (chan->qh->do_split &&
+		    chan->ep_type == USB_ENDPOINT_XFER_ISOC && chan->ep_is_in &&
+		    hsotg->params.host_dma) {
+			qtd->complete_split = 0;
+			qtd->isoc_split_offset = 0;
+		}
+
+		break;
+	default:
+		dev_err(hsotg->dev, "Unhandled halt_status (%d)\n",
+			halt_status);
+		break;
+	}
+
+	if (++qtd->isoc_frame_index == urb->packet_count) {
+		/*
+		 * urb->status is not used for isoc transfers. The individual
+		 * frame_desc statuses are used instead.
+		 */
+		dwc2_host_complete(hsotg, qtd, 0);
+		halt_status = DWC2_HC_XFER_URB_COMPLETE;
+	} else {
+		halt_status = DWC2_HC_XFER_COMPLETE;
+	}
+
+	return halt_status;
+}
+
+/*
+ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
+ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
+ * still linked to the QH, the QH is added to the end of the inactive
+ * non-periodic schedule. For periodic QHs, removes the QH from the periodic
+ * schedule if no more QTDs are linked to the QH.
+ */
+static void dwc2_deactivate_qh(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+			       int free_qtd)
+{
+	int continue_split = 0;
+	struct dwc2_qtd *qtd;
+
+	if (dbg_qh(qh))
+		dev_vdbg(hsotg->dev, "  %s(%p,%p,%d)\n", __func__,
+			 hsotg, qh, free_qtd);
+
+	if (list_empty(&qh->qtd_list)) {
+		dev_dbg(hsotg->dev, "## QTD list empty ##\n");
+		goto no_qtd;
+	}
+
+	qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry);
+
+	if (qtd->complete_split)
+		continue_split = 1;
+	else if (qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_MID ||
+		 qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_END)
+		continue_split = 1;
+
+	if (free_qtd) {
+		dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
+		continue_split = 0;
+	}
+
+no_qtd:
+	qh->channel = NULL;
+	dwc2_hcd_qh_deactivate(hsotg, qh, continue_split);
+}
+
+/**
+ * dwc2_release_channel() - Releases a host channel for use by other transfers
+ *
+ * @hsotg:       The HCD state structure
+ * @chan:        The host channel to release
+ * @qtd:         The QTD associated with the host channel. This QTD may be
+ *               freed if the transfer is complete or an error has occurred.
+ * @halt_status: Reason the channel is being released. This status
+ *               determines the actions taken by this function.
+ *
+ * Also attempts to select and queue more transactions since at least one host
+ * channel is available.
+ */
+static void dwc2_release_channel(struct dwc2_hsotg *hsotg,
+				 struct dwc2_host_chan *chan,
+				 struct dwc2_qtd *qtd,
+				 enum dwc2_halt_status halt_status)
+{
+	enum dwc2_transaction_type tr_type;
+	u32 haintmsk;
+	int free_qtd = 0;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "  %s: channel %d, halt_status %d\n",
+			 __func__, chan->hc_num, halt_status);
+
+	switch (halt_status) {
+	case DWC2_HC_XFER_URB_COMPLETE:
+		free_qtd = 1;
+		break;
+	case DWC2_HC_XFER_AHB_ERR:
+	case DWC2_HC_XFER_STALL:
+	case DWC2_HC_XFER_BABBLE_ERR:
+		free_qtd = 1;
+		break;
+	case DWC2_HC_XFER_XACT_ERR:
+		if (qtd && qtd->error_count >= 3) {
+			dev_vdbg(hsotg->dev,
+				 "  Complete URB with transaction error\n");
+			free_qtd = 1;
+			dwc2_host_complete(hsotg, qtd, -EPROTO);
+		}
+		break;
+	case DWC2_HC_XFER_URB_DEQUEUE:
+		/*
+		 * The QTD has already been removed and the QH has been
+		 * deactivated. Don't want to do anything except release the
+		 * host channel and try to queue more transfers.
+		 */
+		goto cleanup;
+	case DWC2_HC_XFER_PERIODIC_INCOMPLETE:
+		dev_vdbg(hsotg->dev, "  Complete URB with I/O error\n");
+		free_qtd = 1;
+		dwc2_host_complete(hsotg, qtd, -EIO);
+		break;
+	case DWC2_HC_XFER_NO_HALT_STATUS:
+	default:
+		break;
+	}
+
+	dwc2_deactivate_qh(hsotg, chan->qh, free_qtd);
+
+cleanup:
+	/*
+	 * Release the host channel for use by other transfers. The cleanup
+	 * function clears the channel interrupt enables and conditions, so
+	 * there's no need to clear the Channel Halted interrupt separately.
+	 */
+	if (!list_empty(&chan->hc_list_entry))
+		list_del(&chan->hc_list_entry);
+	dwc2_hc_cleanup(hsotg, chan);
+	list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list);
+
+	if (hsotg->params.uframe_sched) {
+		hsotg->available_host_channels++;
+	} else {
+		switch (chan->ep_type) {
+		case USB_ENDPOINT_XFER_CONTROL:
+		case USB_ENDPOINT_XFER_BULK:
+			hsotg->non_periodic_channels--;
+			break;
+		default:
+			/*
+			 * Don't release reservations for periodic channels
+			 * here. That's done when a periodic transfer is
+			 * descheduled (i.e. when the QH is removed from the
+			 * periodic schedule).
+			 */
+			break;
+		}
+	}
+
+	haintmsk = dwc2_readl(hsotg, HAINTMSK);
+	haintmsk &= ~(1 << chan->hc_num);
+	dwc2_writel(hsotg, haintmsk, HAINTMSK);
+
+	/* Try to queue more transfers now that there's a free channel */
+	tr_type = dwc2_hcd_select_transactions(hsotg);
+	if (tr_type != DWC2_TRANSACTION_NONE)
+		dwc2_hcd_queue_transactions(hsotg, tr_type);
+}
+
+/*
+ * Halts a host channel. If the channel cannot be halted immediately because
+ * the request queue is full, this function ensures that the FIFO empty
+ * interrupt for the appropriate queue is enabled so that the halt request can
+ * be queued when there is space in the request queue.
+ *
+ * This function may also be called in DMA mode. In that case, the channel is
+ * simply released since the core always halts the channel automatically in
+ * DMA mode.
+ */
+static void dwc2_halt_channel(struct dwc2_hsotg *hsotg,
+			      struct dwc2_host_chan *chan, struct dwc2_qtd *qtd,
+			      enum dwc2_halt_status halt_status)
+{
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	if (hsotg->params.host_dma) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "DMA enabled\n");
+		dwc2_release_channel(hsotg, chan, qtd, halt_status);
+		return;
+	}
+
+	/* Slave mode processing */
+	dwc2_hc_halt(hsotg, chan, halt_status);
+
+	if (chan->halt_on_queue) {
+		u32 gintmsk;
+
+		dev_vdbg(hsotg->dev, "Halt on queue\n");
+		if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
+		    chan->ep_type == USB_ENDPOINT_XFER_BULK) {
+			dev_vdbg(hsotg->dev, "control/bulk\n");
+			/*
+			 * Make sure the Non-periodic Tx FIFO empty interrupt
+			 * is enabled so that the non-periodic schedule will
+			 * be processed
+			 */
+			gintmsk = dwc2_readl(hsotg, GINTMSK);
+			gintmsk |= GINTSTS_NPTXFEMP;
+			dwc2_writel(hsotg, gintmsk, GINTMSK);
+		} else {
+			dev_vdbg(hsotg->dev, "isoc/intr\n");
+			/*
+			 * Move the QH from the periodic queued schedule to
+			 * the periodic assigned schedule. This allows the
+			 * halt to be queued when the periodic schedule is
+			 * processed.
+			 */
+			list_move_tail(&chan->qh->qh_list_entry,
+				       &hsotg->periodic_sched_assigned);
+
+			/*
+			 * Make sure the Periodic Tx FIFO Empty interrupt is
+			 * enabled so that the periodic schedule will be
+			 * processed
+			 */
+			gintmsk = dwc2_readl(hsotg, GINTMSK);
+			gintmsk |= GINTSTS_PTXFEMP;
+			dwc2_writel(hsotg, gintmsk, GINTMSK);
+		}
+	}
+}
+
+/*
+ * Performs common cleanup for non-periodic transfers after a Transfer
+ * Complete interrupt. This function should be called after any endpoint type
+ * specific handling is finished to release the host channel.
+ */
+static void dwc2_complete_non_periodic_xfer(struct dwc2_hsotg *hsotg,
+					    struct dwc2_host_chan *chan,
+					    int chnum, struct dwc2_qtd *qtd,
+					    enum dwc2_halt_status halt_status)
+{
+	dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	qtd->error_count = 0;
+
+	if (chan->hcint & HCINTMSK_NYET) {
+		/*
+		 * Got a NYET on the last transaction of the transfer. This
+		 * means that the endpoint should be in the PING state at the
+		 * beginning of the next transfer.
+		 */
+		dev_vdbg(hsotg->dev, "got NYET\n");
+		chan->qh->ping_state = 1;
+	}
+
+	/*
+	 * Always halt and release the host channel to make it available for
+	 * more transfers. There may still be more phases for a control
+	 * transfer or more data packets for a bulk transfer at this point,
+	 * but the host channel is still halted. A channel will be reassigned
+	 * to the transfer when the non-periodic schedule is processed after
+	 * the channel is released. This allows transactions to be queued
+	 * properly via dwc2_hcd_queue_transactions, which also enables the
+	 * Tx FIFO Empty interrupt if necessary.
+	 */
+	if (chan->ep_is_in) {
+		/*
+		 * IN transfers in Slave mode require an explicit disable to
+		 * halt the channel. (In DMA mode, this call simply releases
+		 * the channel.)
+		 */
+		dwc2_halt_channel(hsotg, chan, qtd, halt_status);
+	} else {
+		/*
+		 * The channel is automatically disabled by the core for OUT
+		 * transfers in Slave mode
+		 */
+		dwc2_release_channel(hsotg, chan, qtd, halt_status);
+	}
+}
+
+/*
+ * Performs common cleanup for periodic transfers after a Transfer Complete
+ * interrupt. This function should be called after any endpoint type specific
+ * handling is finished to release the host channel.
+ */
+static void dwc2_complete_periodic_xfer(struct dwc2_hsotg *hsotg,
+					struct dwc2_host_chan *chan, int chnum,
+					struct dwc2_qtd *qtd,
+					enum dwc2_halt_status halt_status)
+{
+	u32 hctsiz = dwc2_readl(hsotg, HCTSIZ(chnum));
+
+	qtd->error_count = 0;
+
+	if (!chan->ep_is_in || (hctsiz & TSIZ_PKTCNT_MASK) == 0)
+		/* Core halts channel in these cases */
+		dwc2_release_channel(hsotg, chan, qtd, halt_status);
+	else
+		/* Flush any outstanding requests from the Tx queue */
+		dwc2_halt_channel(hsotg, chan, qtd, halt_status);
+}
+
+static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg,
+				       struct dwc2_host_chan *chan, int chnum,
+				       struct dwc2_qtd *qtd)
+{
+	struct dwc2_hcd_iso_packet_desc *frame_desc;
+	u32 len;
+	u32 hctsiz;
+	u32 pid;
+
+	if (!qtd->urb)
+		return 0;
+
+	frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
+	len = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd,
+					  DWC2_HC_XFER_COMPLETE, NULL);
+	if (!len && !qtd->isoc_split_offset) {
+		qtd->complete_split = 0;
+		return 0;
+	}
+
+	frame_desc->actual_length += len;
+
+	if (chan->align_buf) {
+		dev_vdbg(hsotg->dev, "non-aligned buffer\n");
+		dma_unmap_single(hsotg->dev, chan->qh->dw_align_buf_dma,
+				 DWC2_KMEM_UNALIGNED_BUF_SIZE, DMA_FROM_DEVICE);
+		memcpy(qtd->urb->buf + (chan->xfer_dma - qtd->urb->dma),
+		       chan->qh->dw_align_buf, len);
+	}
+
+	qtd->isoc_split_offset += len;
+
+	hctsiz = dwc2_readl(hsotg, HCTSIZ(chnum));
+	pid = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT;
+
+	if (frame_desc->actual_length >= frame_desc->length || pid == 0) {
+		frame_desc->status = 0;
+		qtd->isoc_frame_index++;
+		qtd->complete_split = 0;
+		qtd->isoc_split_offset = 0;
+	}
+
+	if (qtd->isoc_frame_index == qtd->urb->packet_count) {
+		dwc2_host_complete(hsotg, qtd, 0);
+		dwc2_release_channel(hsotg, chan, qtd,
+				     DWC2_HC_XFER_URB_COMPLETE);
+	} else {
+		dwc2_release_channel(hsotg, chan, qtd,
+				     DWC2_HC_XFER_NO_HALT_STATUS);
+	}
+
+	return 1;	/* Indicates that channel released */
+}
+
+/*
+ * Handles a host channel Transfer Complete interrupt. This handler may be
+ * called in either DMA mode or Slave mode.
+ */
+static void dwc2_hc_xfercomp_intr(struct dwc2_hsotg *hsotg,
+				  struct dwc2_host_chan *chan, int chnum,
+				  struct dwc2_qtd *qtd)
+{
+	struct dwc2_hcd_urb *urb = qtd->urb;
+	enum dwc2_halt_status halt_status = DWC2_HC_XFER_COMPLETE;
+	int pipe_type;
+	int urb_xfer_done;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev,
+			 "--Host Channel %d Interrupt: Transfer Complete--\n",
+			 chnum);
+
+	if (!urb)
+		goto handle_xfercomp_done;
+
+	pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
+
+	if (hsotg->params.dma_desc_enable) {
+		dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, halt_status);
+		if (pipe_type == USB_ENDPOINT_XFER_ISOC)
+			/* Do not disable the interrupt, just clear it */
+			return;
+		goto handle_xfercomp_done;
+	}
+
+	/* Handle xfer complete on CSPLIT */
+	if (chan->qh->do_split) {
+		if (chan->ep_type == USB_ENDPOINT_XFER_ISOC && chan->ep_is_in &&
+		    hsotg->params.host_dma) {
+			if (qtd->complete_split &&
+			    dwc2_xfercomp_isoc_split_in(hsotg, chan, chnum,
+							qtd))
+				goto handle_xfercomp_done;
+		} else {
+			qtd->complete_split = 0;
+		}
+	}
+
+	/* Update the QTD and URB states */
+	switch (pipe_type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		switch (qtd->control_phase) {
+		case DWC2_CONTROL_SETUP:
+			if (urb->length > 0)
+				qtd->control_phase = DWC2_CONTROL_DATA;
+			else
+				qtd->control_phase = DWC2_CONTROL_STATUS;
+			dev_vdbg(hsotg->dev,
+				 "  Control setup transaction done\n");
+			halt_status = DWC2_HC_XFER_COMPLETE;
+			break;
+		case DWC2_CONTROL_DATA:
+			urb_xfer_done = dwc2_update_urb_state(hsotg, chan,
+							      chnum, urb, qtd);
+			if (urb_xfer_done) {
+				qtd->control_phase = DWC2_CONTROL_STATUS;
+				dev_vdbg(hsotg->dev,
+					 "  Control data transfer done\n");
+			} else {
+				dwc2_hcd_save_data_toggle(hsotg, chan, chnum,
+							  qtd);
+			}
+			halt_status = DWC2_HC_XFER_COMPLETE;
+			break;
+		case DWC2_CONTROL_STATUS:
+			dev_vdbg(hsotg->dev, "  Control transfer complete\n");
+			if (urb->status == -EINPROGRESS)
+				urb->status = 0;
+			dwc2_host_complete(hsotg, qtd, urb->status);
+			halt_status = DWC2_HC_XFER_URB_COMPLETE;
+			break;
+		}
+
+		dwc2_complete_non_periodic_xfer(hsotg, chan, chnum, qtd,
+						halt_status);
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		dev_vdbg(hsotg->dev, "  Bulk transfer complete\n");
+		urb_xfer_done = dwc2_update_urb_state(hsotg, chan, chnum, urb,
+						      qtd);
+		if (urb_xfer_done) {
+			dwc2_host_complete(hsotg, qtd, urb->status);
+			halt_status = DWC2_HC_XFER_URB_COMPLETE;
+		} else {
+			halt_status = DWC2_HC_XFER_COMPLETE;
+		}
+
+		dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
+		dwc2_complete_non_periodic_xfer(hsotg, chan, chnum, qtd,
+						halt_status);
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		dev_vdbg(hsotg->dev, "  Interrupt transfer complete\n");
+		urb_xfer_done = dwc2_update_urb_state(hsotg, chan, chnum, urb,
+						      qtd);
+
+		/*
+		 * Interrupt URB is done on the first transfer complete
+		 * interrupt
+		 */
+		if (urb_xfer_done) {
+			dwc2_host_complete(hsotg, qtd, urb->status);
+			halt_status = DWC2_HC_XFER_URB_COMPLETE;
+		} else {
+			halt_status = DWC2_HC_XFER_COMPLETE;
+		}
+
+		dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
+		dwc2_complete_periodic_xfer(hsotg, chan, chnum, qtd,
+					    halt_status);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (dbg_perio())
+			dev_vdbg(hsotg->dev, "  Isochronous transfer complete\n");
+		if (qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_ALL)
+			halt_status = dwc2_update_isoc_urb_state(hsotg, chan,
+							chnum, qtd,
+							DWC2_HC_XFER_COMPLETE);
+		dwc2_complete_periodic_xfer(hsotg, chan, chnum, qtd,
+					    halt_status);
+		break;
+	}
+
+handle_xfercomp_done:
+	disable_hc_int(hsotg, chnum, HCINTMSK_XFERCOMPL);
+}
+
+/*
+ * Handles a host channel STALL interrupt. This handler may be called in
+ * either DMA mode or Slave mode.
+ */
+static void dwc2_hc_stall_intr(struct dwc2_hsotg *hsotg,
+			       struct dwc2_host_chan *chan, int chnum,
+			       struct dwc2_qtd *qtd)
+{
+	struct dwc2_hcd_urb *urb = qtd->urb;
+	int pipe_type;
+
+	dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: STALL Received--\n",
+		chnum);
+
+	if (hsotg->params.dma_desc_enable) {
+		dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
+					    DWC2_HC_XFER_STALL);
+		goto handle_stall_done;
+	}
+
+	if (!urb)
+		goto handle_stall_halt;
+
+	pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
+
+	if (pipe_type == USB_ENDPOINT_XFER_CONTROL)
+		dwc2_host_complete(hsotg, qtd, -EPIPE);
+
+	if (pipe_type == USB_ENDPOINT_XFER_BULK ||
+	    pipe_type == USB_ENDPOINT_XFER_INT) {
+		dwc2_host_complete(hsotg, qtd, -EPIPE);
+		/*
+		 * USB protocol requires resetting the data toggle for bulk
+		 * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
+		 * setup command is issued to the endpoint. Anticipate the
+		 * CLEAR_FEATURE command since a STALL has occurred and reset
+		 * the data toggle now.
+		 */
+		chan->qh->data_toggle = 0;
+	}
+
+handle_stall_halt:
+	dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_STALL);
+
+handle_stall_done:
+	disable_hc_int(hsotg, chnum, HCINTMSK_STALL);
+}
+
+/*
+ * Updates the state of the URB when a transfer has been stopped due to an
+ * abnormal condition before the transfer completes. Modifies the
+ * actual_length field of the URB to reflect the number of bytes that have
+ * actually been transferred via the host channel.
+ */
+static void dwc2_update_urb_state_abn(struct dwc2_hsotg *hsotg,
+				      struct dwc2_host_chan *chan, int chnum,
+				      struct dwc2_hcd_urb *urb,
+				      struct dwc2_qtd *qtd,
+				      enum dwc2_halt_status halt_status)
+{
+	u32 xfer_length = dwc2_get_actual_xfer_length(hsotg, chan, chnum,
+						      qtd, halt_status, NULL);
+	u32 hctsiz;
+
+	if (urb->actual_length + xfer_length > urb->length) {
+		dev_warn(hsotg->dev, "%s(): trimming xfer length\n", __func__);
+		xfer_length = urb->length - urb->actual_length;
+	}
+
+	urb->actual_length += xfer_length;
+
+	hctsiz = dwc2_readl(hsotg, HCTSIZ(chnum));
+	dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n",
+		 __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum);
+	dev_vdbg(hsotg->dev, "  chan->start_pkt_count %d\n",
+		 chan->start_pkt_count);
+	dev_vdbg(hsotg->dev, "  hctsiz.pktcnt %d\n",
+		 (hctsiz & TSIZ_PKTCNT_MASK) >> TSIZ_PKTCNT_SHIFT);
+	dev_vdbg(hsotg->dev, "  chan->max_packet %d\n", chan->max_packet);
+	dev_vdbg(hsotg->dev, "  bytes_transferred %d\n",
+		 xfer_length);
+	dev_vdbg(hsotg->dev, "  urb->actual_length %d\n",
+		 urb->actual_length);
+	dev_vdbg(hsotg->dev, "  urb->transfer_buffer_length %d\n",
+		 urb->length);
+}
+
+/*
+ * Handles a host channel NAK interrupt. This handler may be called in either
+ * DMA mode or Slave mode.
+ */
+static void dwc2_hc_nak_intr(struct dwc2_hsotg *hsotg,
+			     struct dwc2_host_chan *chan, int chnum,
+			     struct dwc2_qtd *qtd)
+{
+	if (!qtd) {
+		dev_dbg(hsotg->dev, "%s: qtd is NULL\n", __func__);
+		return;
+	}
+
+	if (!qtd->urb) {
+		dev_dbg(hsotg->dev, "%s: qtd->urb is NULL\n", __func__);
+		return;
+	}
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: NAK Received--\n",
+			 chnum);
+
+	/*
+	 * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
+	 * interrupt. Re-start the SSPLIT transfer.
+	 *
+	 * Normally for non-periodic transfers we'll retry right away, but to
+	 * avoid interrupt storms we'll wait before retrying if we've got
+	 * several NAKs. If we didn't do this we'd retry directly from the
+	 * interrupt handler and could end up quickly getting another
+	 * interrupt (another NAK), which we'd retry. Note that we do not
+	 * delay retries for IN parts of control requests, as those are expected
+	 * to complete fairly quickly, and if we delay them we risk confusing
+	 * the device and cause it issue STALL.
+	 *
+	 * Note that in DMA mode software only gets involved to re-send NAKed
+	 * transfers for split transactions, so we only need to apply this
+	 * delaying logic when handling splits. In non-DMA mode presumably we
+	 * might want a similar delay if someone can demonstrate this problem
+	 * affects that code path too.
+	 */
+	if (chan->do_split) {
+		if (chan->complete_split)
+			qtd->error_count = 0;
+		qtd->complete_split = 0;
+		qtd->num_naks++;
+		qtd->qh->want_wait = qtd->num_naks >= DWC2_NAKS_BEFORE_DELAY &&
+				!(chan->ep_type == USB_ENDPOINT_XFER_CONTROL &&
+				  chan->ep_is_in);
+		dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK);
+		goto handle_nak_done;
+	}
+
+	switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+	case USB_ENDPOINT_XFER_BULK:
+		if (hsotg->params.host_dma && chan->ep_is_in) {
+			/*
+			 * NAK interrupts are enabled on bulk/control IN
+			 * transfers in DMA mode for the sole purpose of
+			 * resetting the error count after a transaction error
+			 * occurs. The core will continue transferring data.
+			 */
+			qtd->error_count = 0;
+			break;
+		}
+
+		/*
+		 * NAK interrupts normally occur during OUT transfers in DMA
+		 * or Slave mode. For IN transfers, more requests will be
+		 * queued as request queue space is available.
+		 */
+		qtd->error_count = 0;
+
+		if (!chan->qh->ping_state) {
+			dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb,
+						  qtd, DWC2_HC_XFER_NAK);
+			dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
+
+			if (chan->speed == USB_SPEED_HIGH)
+				chan->qh->ping_state = 1;
+		}
+
+		/*
+		 * Halt the channel so the transfer can be re-started from
+		 * the appropriate point or the PING protocol will
+		 * start/continue
+		 */
+		dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK);
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		qtd->error_count = 0;
+		dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		/* Should never get called for isochronous transfers */
+		dev_err(hsotg->dev, "NACK interrupt for ISOC transfer\n");
+		break;
+	}
+
+handle_nak_done:
+	disable_hc_int(hsotg, chnum, HCINTMSK_NAK);
+}
+
+/*
+ * Handles a host channel ACK interrupt. This interrupt is enabled when
+ * performing the PING protocol in Slave mode, when errors occur during
+ * either Slave mode or DMA mode, and during Start Split transactions.
+ */
+static void dwc2_hc_ack_intr(struct dwc2_hsotg *hsotg,
+			     struct dwc2_host_chan *chan, int chnum,
+			     struct dwc2_qtd *qtd)
+{
+	struct dwc2_hcd_iso_packet_desc *frame_desc;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: ACK Received--\n",
+			 chnum);
+
+	if (chan->do_split) {
+		/* Handle ACK on SSPLIT. ACK should not occur in CSPLIT. */
+		if (!chan->ep_is_in &&
+		    chan->data_pid_start != DWC2_HC_PID_SETUP)
+			qtd->ssplit_out_xfer_count = chan->xfer_len;
+
+		if (chan->ep_type != USB_ENDPOINT_XFER_ISOC || chan->ep_is_in) {
+			qtd->complete_split = 1;
+			dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_ACK);
+		} else {
+			/* ISOC OUT */
+			switch (chan->xact_pos) {
+			case DWC2_HCSPLT_XACTPOS_ALL:
+				break;
+			case DWC2_HCSPLT_XACTPOS_END:
+				qtd->isoc_split_pos = DWC2_HCSPLT_XACTPOS_ALL;
+				qtd->isoc_split_offset = 0;
+				break;
+			case DWC2_HCSPLT_XACTPOS_BEGIN:
+			case DWC2_HCSPLT_XACTPOS_MID:
+				/*
+				 * For BEGIN or MID, calculate the length for
+				 * the next microframe to determine the correct
+				 * SSPLIT token, either MID or END
+				 */
+				frame_desc = &qtd->urb->iso_descs[
+						qtd->isoc_frame_index];
+				qtd->isoc_split_offset += 188;
+
+				if (frame_desc->length - qtd->isoc_split_offset
+							<= 188)
+					qtd->isoc_split_pos =
+							DWC2_HCSPLT_XACTPOS_END;
+				else
+					qtd->isoc_split_pos =
+							DWC2_HCSPLT_XACTPOS_MID;
+				break;
+			}
+		}
+	} else {
+		qtd->error_count = 0;
+
+		if (chan->qh->ping_state) {
+			chan->qh->ping_state = 0;
+			/*
+			 * Halt the channel so the transfer can be re-started
+			 * from the appropriate point. This only happens in
+			 * Slave mode. In DMA mode, the ping_state is cleared
+			 * when the transfer is started because the core
+			 * automatically executes the PING, then the transfer.
+			 */
+			dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_ACK);
+		}
+	}
+
+	/*
+	 * If the ACK occurred when _not_ in the PING state, let the channel
+	 * continue transferring data after clearing the error count
+	 */
+	disable_hc_int(hsotg, chnum, HCINTMSK_ACK);
+}
+
+/*
+ * Handles a host channel NYET interrupt. This interrupt should only occur on
+ * Bulk and Control OUT endpoints and for complete split transactions. If a
+ * NYET occurs at the same time as a Transfer Complete interrupt, it is
+ * handled in the xfercomp interrupt handler, not here. This handler may be
+ * called in either DMA mode or Slave mode.
+ */
+static void dwc2_hc_nyet_intr(struct dwc2_hsotg *hsotg,
+			      struct dwc2_host_chan *chan, int chnum,
+			      struct dwc2_qtd *qtd)
+{
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: NYET Received--\n",
+			 chnum);
+
+	/*
+	 * NYET on CSPLIT
+	 * re-do the CSPLIT immediately on non-periodic
+	 */
+	if (chan->do_split && chan->complete_split) {
+		if (chan->ep_is_in && chan->ep_type == USB_ENDPOINT_XFER_ISOC &&
+		    hsotg->params.host_dma) {
+			qtd->complete_split = 0;
+			qtd->isoc_split_offset = 0;
+			qtd->isoc_frame_index++;
+			if (qtd->urb &&
+			    qtd->isoc_frame_index == qtd->urb->packet_count) {
+				dwc2_host_complete(hsotg, qtd, 0);
+				dwc2_release_channel(hsotg, chan, qtd,
+						     DWC2_HC_XFER_URB_COMPLETE);
+			} else {
+				dwc2_release_channel(hsotg, chan, qtd,
+						DWC2_HC_XFER_NO_HALT_STATUS);
+			}
+			goto handle_nyet_done;
+		}
+
+		if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+		    chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+			struct dwc2_qh *qh = chan->qh;
+			bool past_end;
+
+			if (!hsotg->params.uframe_sched) {
+				int frnum = dwc2_hcd_get_frame_number(hsotg);
+
+				/* Don't have num_hs_transfers; simple logic */
+				past_end = dwc2_full_frame_num(frnum) !=
+				     dwc2_full_frame_num(qh->next_active_frame);
+			} else {
+				int end_frnum;
+
+				/*
+				 * Figure out the end frame based on
+				 * schedule.
+				 *
+				 * We don't want to go on trying again
+				 * and again forever. Let's stop when
+				 * we've done all the transfers that
+				 * were scheduled.
+				 *
+				 * We're going to be comparing
+				 * start_active_frame and
+				 * next_active_frame, both of which
+				 * are 1 before the time the packet
+				 * goes on the wire, so that cancels
+				 * out. Basically if had 1 transfer
+				 * and we saw 1 NYET then we're done.
+				 * We're getting a NYET here so if
+				 * next >= (start + num_transfers)
+				 * we're done. The complexity is that
+				 * for all but ISOC_OUT we skip one
+				 * slot.
+				 */
+				end_frnum = dwc2_frame_num_inc(
+					qh->start_active_frame,
+					qh->num_hs_transfers);
+
+				if (qh->ep_type != USB_ENDPOINT_XFER_ISOC ||
+				    qh->ep_is_in)
+					end_frnum =
+					       dwc2_frame_num_inc(end_frnum, 1);
+
+				past_end = dwc2_frame_num_le(
+					end_frnum, qh->next_active_frame);
+			}
+
+			if (past_end) {
+				/* Treat this as a transaction error. */
+#if 0
+				/*
+				 * Todo: Fix system performance so this can
+				 * be treated as an error. Right now complete
+				 * splits cannot be scheduled precisely enough
+				 * due to other system activity, so this error
+				 * occurs regularly in Slave mode.
+				 */
+				qtd->error_count++;
+#endif
+				qtd->complete_split = 0;
+				dwc2_halt_channel(hsotg, chan, qtd,
+						  DWC2_HC_XFER_XACT_ERR);
+				/* Todo: add support for isoc release */
+				goto handle_nyet_done;
+			}
+		}
+
+		dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NYET);
+		goto handle_nyet_done;
+	}
+
+	chan->qh->ping_state = 1;
+	qtd->error_count = 0;
+
+	dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb, qtd,
+				  DWC2_HC_XFER_NYET);
+	dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
+
+	/*
+	 * Halt the channel and re-start the transfer so the PING protocol
+	 * will start
+	 */
+	dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NYET);
+
+handle_nyet_done:
+	disable_hc_int(hsotg, chnum, HCINTMSK_NYET);
+}
+
+/*
+ * Handles a host channel babble interrupt. This handler may be called in
+ * either DMA mode or Slave mode.
+ */
+static void dwc2_hc_babble_intr(struct dwc2_hsotg *hsotg,
+				struct dwc2_host_chan *chan, int chnum,
+				struct dwc2_qtd *qtd)
+{
+	dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: Babble Error--\n",
+		chnum);
+
+	dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
+
+	if (hsotg->params.dma_desc_enable) {
+		dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
+					    DWC2_HC_XFER_BABBLE_ERR);
+		goto disable_int;
+	}
+
+	if (chan->ep_type != USB_ENDPOINT_XFER_ISOC) {
+		dwc2_host_complete(hsotg, qtd, -EOVERFLOW);
+		dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_BABBLE_ERR);
+	} else {
+		enum dwc2_halt_status halt_status;
+
+		halt_status = dwc2_update_isoc_urb_state(hsotg, chan, chnum,
+						qtd, DWC2_HC_XFER_BABBLE_ERR);
+		dwc2_halt_channel(hsotg, chan, qtd, halt_status);
+	}
+
+disable_int:
+	disable_hc_int(hsotg, chnum, HCINTMSK_BBLERR);
+}
+
+/*
+ * Handles a host channel AHB error interrupt. This handler is only called in
+ * DMA mode.
+ */
+static void dwc2_hc_ahberr_intr(struct dwc2_hsotg *hsotg,
+				struct dwc2_host_chan *chan, int chnum,
+				struct dwc2_qtd *qtd)
+{
+	struct dwc2_hcd_urb *urb = qtd->urb;
+	char *pipetype, *speed;
+	u32 hcchar;
+	u32 hcsplt;
+	u32 hctsiz;
+	u32 hc_dma;
+
+	dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: AHB Error--\n",
+		chnum);
+
+	if (!urb)
+		goto handle_ahberr_halt;
+
+	dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
+
+	hcchar = dwc2_readl(hsotg, HCCHAR(chnum));
+	hcsplt = dwc2_readl(hsotg, HCSPLT(chnum));
+	hctsiz = dwc2_readl(hsotg, HCTSIZ(chnum));
+	hc_dma = dwc2_readl(hsotg, HCDMA(chnum));
+
+	dev_err(hsotg->dev, "AHB ERROR, Channel %d\n", chnum);
+	dev_err(hsotg->dev, "  hcchar 0x%08x, hcsplt 0x%08x\n", hcchar, hcsplt);
+	dev_err(hsotg->dev, "  hctsiz 0x%08x, hc_dma 0x%08x\n", hctsiz, hc_dma);
+	dev_err(hsotg->dev, "  Device address: %d\n",
+		dwc2_hcd_get_dev_addr(&urb->pipe_info));
+	dev_err(hsotg->dev, "  Endpoint: %d, %s\n",
+		dwc2_hcd_get_ep_num(&urb->pipe_info),
+		dwc2_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT");
+
+	switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		pipetype = "CONTROL";
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		pipetype = "BULK";
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		pipetype = "INTERRUPT";
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		pipetype = "ISOCHRONOUS";
+		break;
+	default:
+		pipetype = "UNKNOWN";
+		break;
+	}
+
+	dev_err(hsotg->dev, "  Endpoint type: %s\n", pipetype);
+
+	switch (chan->speed) {
+	case USB_SPEED_HIGH:
+		speed = "HIGH";
+		break;
+	case USB_SPEED_FULL:
+		speed = "FULL";
+		break;
+	case USB_SPEED_LOW:
+		speed = "LOW";
+		break;
+	default:
+		speed = "UNKNOWN";
+		break;
+	}
+
+	dev_err(hsotg->dev, "  Speed: %s\n", speed);
+
+	dev_err(hsotg->dev, "  Max packet size: %d (mult %d)\n",
+		dwc2_hcd_get_maxp(&urb->pipe_info),
+		dwc2_hcd_get_maxp_mult(&urb->pipe_info));
+	dev_err(hsotg->dev, "  Data buffer length: %d\n", urb->length);
+	dev_err(hsotg->dev, "  Transfer buffer: %p, Transfer DMA: %08lx\n",
+		urb->buf, (unsigned long)urb->dma);
+	dev_err(hsotg->dev, "  Setup buffer: %p, Setup DMA: %08lx\n",
+		urb->setup_packet, (unsigned long)urb->setup_dma);
+	dev_err(hsotg->dev, "  Interval: %d\n", urb->interval);
+
+	/* Core halts the channel for Descriptor DMA mode */
+	if (hsotg->params.dma_desc_enable) {
+		dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
+					    DWC2_HC_XFER_AHB_ERR);
+		goto handle_ahberr_done;
+	}
+
+	dwc2_host_complete(hsotg, qtd, -EIO);
+
+handle_ahberr_halt:
+	/*
+	 * Force a channel halt. Don't call dwc2_halt_channel because that won't
+	 * write to the HCCHARn register in DMA mode to force the halt.
+	 */
+	dwc2_hc_halt(hsotg, chan, DWC2_HC_XFER_AHB_ERR);
+
+handle_ahberr_done:
+	disable_hc_int(hsotg, chnum, HCINTMSK_AHBERR);
+}
+
+/*
+ * Handles a host channel transaction error interrupt. This handler may be
+ * called in either DMA mode or Slave mode.
+ */
+static void dwc2_hc_xacterr_intr(struct dwc2_hsotg *hsotg,
+				 struct dwc2_host_chan *chan, int chnum,
+				 struct dwc2_qtd *qtd)
+{
+	dev_dbg(hsotg->dev,
+		"--Host Channel %d Interrupt: Transaction Error--\n", chnum);
+
+	dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
+
+	if (hsotg->params.dma_desc_enable) {
+		dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
+					    DWC2_HC_XFER_XACT_ERR);
+		goto handle_xacterr_done;
+	}
+
+	switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+	case USB_ENDPOINT_XFER_BULK:
+		qtd->error_count++;
+		if (!chan->qh->ping_state) {
+			dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb,
+						  qtd, DWC2_HC_XFER_XACT_ERR);
+			dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
+			if (!chan->ep_is_in && chan->speed == USB_SPEED_HIGH)
+				chan->qh->ping_state = 1;
+		}
+
+		/*
+		 * Halt the channel so the transfer can be re-started from
+		 * the appropriate point or the PING protocol will start
+		 */
+		dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR);
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		qtd->error_count++;
+		if (chan->do_split && chan->complete_split)
+			qtd->complete_split = 0;
+		dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		{
+			enum dwc2_halt_status halt_status;
+
+			halt_status = dwc2_update_isoc_urb_state(hsotg, chan,
+					 chnum, qtd, DWC2_HC_XFER_XACT_ERR);
+			dwc2_halt_channel(hsotg, chan, qtd, halt_status);
+		}
+		break;
+	}
+
+handle_xacterr_done:
+	disable_hc_int(hsotg, chnum, HCINTMSK_XACTERR);
+}
+
+/*
+ * Handles a host channel frame overrun interrupt. This handler may be called
+ * in either DMA mode or Slave mode.
+ */
+static void dwc2_hc_frmovrun_intr(struct dwc2_hsotg *hsotg,
+				  struct dwc2_host_chan *chan, int chnum,
+				  struct dwc2_qtd *qtd)
+{
+	enum dwc2_halt_status halt_status;
+
+	if (dbg_hc(chan))
+		dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: Frame Overrun--\n",
+			chnum);
+
+	dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
+
+	switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+	case USB_ENDPOINT_XFER_BULK:
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_FRAME_OVERRUN);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		halt_status = dwc2_update_isoc_urb_state(hsotg, chan, chnum,
+					qtd, DWC2_HC_XFER_FRAME_OVERRUN);
+		dwc2_halt_channel(hsotg, chan, qtd, halt_status);
+		break;
+	}
+
+	disable_hc_int(hsotg, chnum, HCINTMSK_FRMOVRUN);
+}
+
+/*
+ * Handles a host channel data toggle error interrupt. This handler may be
+ * called in either DMA mode or Slave mode.
+ */
+static void dwc2_hc_datatglerr_intr(struct dwc2_hsotg *hsotg,
+				    struct dwc2_host_chan *chan, int chnum,
+				    struct dwc2_qtd *qtd)
+{
+	dev_dbg(hsotg->dev,
+		"--Host Channel %d Interrupt: Data Toggle Error--\n", chnum);
+
+	if (chan->ep_is_in)
+		qtd->error_count = 0;
+	else
+		dev_err(hsotg->dev,
+			"Data Toggle Error on OUT transfer, channel %d\n",
+			chnum);
+
+	dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
+	disable_hc_int(hsotg, chnum, HCINTMSK_DATATGLERR);
+}
+
+/*
+ * For debug only. It checks that a valid halt status is set and that
+ * HCCHARn.chdis is clear. If there's a problem, corrective action is
+ * taken and a warning is issued.
+ *
+ * Return: true if halt status is ok, false otherwise
+ */
+static bool dwc2_halt_status_ok(struct dwc2_hsotg *hsotg,
+				struct dwc2_host_chan *chan, int chnum,
+				struct dwc2_qtd *qtd)
+{
+#ifdef DEBUG
+	u32 hcchar;
+	u32 hctsiz;
+	u32 hcintmsk;
+	u32 hcsplt;
+
+	if (chan->halt_status == DWC2_HC_XFER_NO_HALT_STATUS) {
+		/*
+		 * This code is here only as a check. This condition should
+		 * never happen. Ignore the halt if it does occur.
+		 */
+		hcchar = dwc2_readl(hsotg, HCCHAR(chnum));
+		hctsiz = dwc2_readl(hsotg, HCTSIZ(chnum));
+		hcintmsk = dwc2_readl(hsotg, HCINTMSK(chnum));
+		hcsplt = dwc2_readl(hsotg, HCSPLT(chnum));
+		dev_dbg(hsotg->dev,
+			"%s: chan->halt_status DWC2_HC_XFER_NO_HALT_STATUS,\n",
+			 __func__);
+		dev_dbg(hsotg->dev,
+			"channel %d, hcchar 0x%08x, hctsiz 0x%08x,\n",
+			chnum, hcchar, hctsiz);
+		dev_dbg(hsotg->dev,
+			"hcint 0x%08x, hcintmsk 0x%08x, hcsplt 0x%08x,\n",
+			chan->hcint, hcintmsk, hcsplt);
+		if (qtd)
+			dev_dbg(hsotg->dev, "qtd->complete_split %d\n",
+				qtd->complete_split);
+		dev_warn(hsotg->dev,
+			 "%s: no halt status, channel %d, ignoring interrupt\n",
+			 __func__, chnum);
+		return false;
+	}
+
+	/*
+	 * This code is here only as a check. hcchar.chdis should never be set
+	 * when the halt interrupt occurs. Halt the channel again if it does
+	 * occur.
+	 */
+	hcchar = dwc2_readl(hsotg, HCCHAR(chnum));
+	if (hcchar & HCCHAR_CHDIS) {
+		dev_warn(hsotg->dev,
+			 "%s: hcchar.chdis set unexpectedly, hcchar 0x%08x, trying to halt again\n",
+			 __func__, hcchar);
+		chan->halt_pending = 0;
+		dwc2_halt_channel(hsotg, chan, qtd, chan->halt_status);
+		return false;
+	}
+#endif
+
+	return true;
+}
+
+/*
+ * Handles a host Channel Halted interrupt in DMA mode. This handler
+ * determines the reason the channel halted and proceeds accordingly.
+ */
+static void dwc2_hc_chhltd_intr_dma(struct dwc2_hsotg *hsotg,
+				    struct dwc2_host_chan *chan, int chnum,
+				    struct dwc2_qtd *qtd)
+{
+	u32 hcintmsk;
+	int out_nak_enh = 0;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev,
+			 "--Host Channel %d Interrupt: DMA Channel Halted--\n",
+			 chnum);
+
+	/*
+	 * For core with OUT NAK enhancement, the flow for high-speed
+	 * CONTROL/BULK OUT is handled a little differently
+	 */
+	if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_71a) {
+		if (chan->speed == USB_SPEED_HIGH && !chan->ep_is_in &&
+		    (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
+		     chan->ep_type == USB_ENDPOINT_XFER_BULK)) {
+			out_nak_enh = 1;
+		}
+	}
+
+	if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE ||
+	    (chan->halt_status == DWC2_HC_XFER_AHB_ERR &&
+	     !hsotg->params.dma_desc_enable)) {
+		if (hsotg->params.dma_desc_enable)
+			dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
+						    chan->halt_status);
+		else
+			/*
+			 * Just release the channel. A dequeue can happen on a
+			 * transfer timeout. In the case of an AHB Error, the
+			 * channel was forced to halt because there's no way to
+			 * gracefully recover.
+			 */
+			dwc2_release_channel(hsotg, chan, qtd,
+					     chan->halt_status);
+		return;
+	}
+
+	hcintmsk = dwc2_readl(hsotg, HCINTMSK(chnum));
+
+	if (chan->hcint & HCINTMSK_XFERCOMPL) {
+		/*
+		 * Todo: This is here because of a possible hardware bug. Spec
+		 * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
+		 * interrupt w/ACK bit set should occur, but I only see the
+		 * XFERCOMP bit, even with it masked out. This is a workaround
+		 * for that behavior. Should fix this when hardware is fixed.
+		 */
+		if (chan->ep_type == USB_ENDPOINT_XFER_ISOC && !chan->ep_is_in)
+			dwc2_hc_ack_intr(hsotg, chan, chnum, qtd);
+		dwc2_hc_xfercomp_intr(hsotg, chan, chnum, qtd);
+	} else if (chan->hcint & HCINTMSK_STALL) {
+		dwc2_hc_stall_intr(hsotg, chan, chnum, qtd);
+	} else if ((chan->hcint & HCINTMSK_XACTERR) &&
+		   !hsotg->params.dma_desc_enable) {
+		if (out_nak_enh) {
+			if (chan->hcint &
+			    (HCINTMSK_NYET | HCINTMSK_NAK | HCINTMSK_ACK)) {
+				dev_vdbg(hsotg->dev,
+					 "XactErr with NYET/NAK/ACK\n");
+				qtd->error_count = 0;
+			} else {
+				dev_vdbg(hsotg->dev,
+					 "XactErr without NYET/NAK/ACK\n");
+			}
+		}
+
+		/*
+		 * Must handle xacterr before nak or ack. Could get a xacterr
+		 * at the same time as either of these on a BULK/CONTROL OUT
+		 * that started with a PING. The xacterr takes precedence.
+		 */
+		dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd);
+	} else if ((chan->hcint & HCINTMSK_XCS_XACT) &&
+		   hsotg->params.dma_desc_enable) {
+		dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd);
+	} else if ((chan->hcint & HCINTMSK_AHBERR) &&
+		   hsotg->params.dma_desc_enable) {
+		dwc2_hc_ahberr_intr(hsotg, chan, chnum, qtd);
+	} else if (chan->hcint & HCINTMSK_BBLERR) {
+		dwc2_hc_babble_intr(hsotg, chan, chnum, qtd);
+	} else if (chan->hcint & HCINTMSK_FRMOVRUN) {
+		dwc2_hc_frmovrun_intr(hsotg, chan, chnum, qtd);
+	} else if (!out_nak_enh) {
+		if (chan->hcint & HCINTMSK_NYET) {
+			/*
+			 * Must handle nyet before nak or ack. Could get a nyet
+			 * at the same time as either of those on a BULK/CONTROL
+			 * OUT that started with a PING. The nyet takes
+			 * precedence.
+			 */
+			dwc2_hc_nyet_intr(hsotg, chan, chnum, qtd);
+		} else if ((chan->hcint & HCINTMSK_NAK) &&
+			   !(hcintmsk & HCINTMSK_NAK)) {
+			/*
+			 * If nak is not masked, it's because a non-split IN
+			 * transfer is in an error state. In that case, the nak
+			 * is handled by the nak interrupt handler, not here.
+			 * Handle nak here for BULK/CONTROL OUT transfers, which
+			 * halt on a NAK to allow rewinding the buffer pointer.
+			 */
+			dwc2_hc_nak_intr(hsotg, chan, chnum, qtd);
+		} else if ((chan->hcint & HCINTMSK_ACK) &&
+			   !(hcintmsk & HCINTMSK_ACK)) {
+			/*
+			 * If ack is not masked, it's because a non-split IN
+			 * transfer is in an error state. In that case, the ack
+			 * is handled by the ack interrupt handler, not here.
+			 * Handle ack here for split transfers. Start splits
+			 * halt on ACK.
+			 */
+			dwc2_hc_ack_intr(hsotg, chan, chnum, qtd);
+		} else {
+			if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+			    chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+				/*
+				 * A periodic transfer halted with no other
+				 * channel interrupts set. Assume it was halted
+				 * by the core because it could not be completed
+				 * in its scheduled (micro)frame.
+				 */
+				dev_dbg(hsotg->dev,
+					"%s: Halt channel %d (assume incomplete periodic transfer)\n",
+					__func__, chnum);
+				dwc2_halt_channel(hsotg, chan, qtd,
+					DWC2_HC_XFER_PERIODIC_INCOMPLETE);
+			} else {
+				dev_err(hsotg->dev,
+					"%s: Channel %d - ChHltd set, but reason is unknown\n",
+					__func__, chnum);
+				dev_err(hsotg->dev,
+					"hcint 0x%08x, intsts 0x%08x\n",
+					chan->hcint,
+					dwc2_readl(hsotg, GINTSTS));
+				goto error;
+			}
+		}
+	} else {
+		dev_info(hsotg->dev,
+			 "NYET/NAK/ACK/other in non-error case, 0x%08x\n",
+			 chan->hcint);
+error:
+		/* Failthrough: use 3-strikes rule */
+		qtd->error_count++;
+		dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb,
+					  qtd, DWC2_HC_XFER_XACT_ERR);
+		/*
+		 * We can get here after a completed transaction
+		 * (urb->actual_length >= urb->length) which was not reported
+		 * as completed. If that is the case, and we do not abort
+		 * the transfer, a transfer of size 0 will be enqueued
+		 * subsequently. If urb->actual_length is not DMA-aligned,
+		 * the buffer will then point to an unaligned address, and
+		 * the resulting behavior is undefined. Bail out in that
+		 * situation.
+		 */
+		if (qtd->urb->actual_length >= qtd->urb->length)
+			qtd->error_count = 3;
+		dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
+		dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR);
+	}
+}
+
+/*
+ * Handles a host channel Channel Halted interrupt
+ *
+ * In slave mode, this handler is called only when the driver specifically
+ * requests a halt. This occurs during handling other host channel interrupts
+ * (e.g. nak, xacterr, stall, nyet, etc.).
+ *
+ * In DMA mode, this is the interrupt that occurs when the core has finished
+ * processing a transfer on a channel. Other host channel interrupts (except
+ * ahberr) are disabled in DMA mode.
+ */
+static void dwc2_hc_chhltd_intr(struct dwc2_hsotg *hsotg,
+				struct dwc2_host_chan *chan, int chnum,
+				struct dwc2_qtd *qtd)
+{
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: Channel Halted--\n",
+			 chnum);
+
+	if (hsotg->params.host_dma) {
+		dwc2_hc_chhltd_intr_dma(hsotg, chan, chnum, qtd);
+	} else {
+		if (!dwc2_halt_status_ok(hsotg, chan, chnum, qtd))
+			return;
+		dwc2_release_channel(hsotg, chan, qtd, chan->halt_status);
+	}
+}
+
+/*
+ * Check if the given qtd is still the top of the list (and thus valid).
+ *
+ * If dwc2_hcd_qtd_unlink_and_free() has been called since we grabbed
+ * the qtd from the top of the list, this will return false (otherwise true).
+ */
+static bool dwc2_check_qtd_still_ok(struct dwc2_qtd *qtd, struct dwc2_qh *qh)
+{
+	struct dwc2_qtd *cur_head;
+
+	if (!qh)
+		return false;
+
+	cur_head = list_first_entry(&qh->qtd_list, struct dwc2_qtd,
+				    qtd_list_entry);
+	return (cur_head == qtd);
+}
+
+/* Handles interrupt for a specific Host Channel */
+static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum)
+{
+	struct dwc2_qtd *qtd;
+	struct dwc2_host_chan *chan;
+	u32 hcint, hcintraw, hcintmsk;
+
+	chan = hsotg->hc_ptr_array[chnum];
+
+	hcintraw = dwc2_readl(hsotg, HCINT(chnum));
+	hcintmsk = dwc2_readl(hsotg, HCINTMSK(chnum));
+	hcint = hcintraw & hcintmsk;
+	dwc2_writel(hsotg, hcint, HCINT(chnum));
+
+	if (!chan) {
+		dev_err(hsotg->dev, "## hc_ptr_array for channel is NULL ##\n");
+		return;
+	}
+
+	if (dbg_hc(chan)) {
+		dev_vdbg(hsotg->dev, "--Host Channel Interrupt--, Channel %d\n",
+			 chnum);
+		dev_vdbg(hsotg->dev,
+			 "  hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
+			 hcintraw, hcintmsk, hcint);
+	}
+
+	/*
+	 * If we got an interrupt after someone called
+	 * dwc2_hcd_endpoint_disable() we don't want to crash below
+	 */
+	if (!chan->qh) {
+		dev_warn(hsotg->dev, "Interrupt on disabled channel\n");
+		return;
+	}
+
+	chan->hcint = hcintraw;
+
+	/*
+	 * If the channel was halted due to a dequeue, the qtd list might
+	 * be empty or at least the first entry will not be the active qtd.
+	 * In this case, take a shortcut and just release the channel.
+	 */
+	if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE) {
+		/*
+		 * If the channel was halted, this should be the only
+		 * interrupt unmasked
+		 */
+		WARN_ON(hcint != HCINTMSK_CHHLTD);
+		if (hsotg->params.dma_desc_enable)
+			dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
+						    chan->halt_status);
+		else
+			dwc2_release_channel(hsotg, chan, NULL,
+					     chan->halt_status);
+		return;
+	}
+
+	if (list_empty(&chan->qh->qtd_list)) {
+		/*
+		 * TODO: Will this ever happen with the
+		 * DWC2_HC_XFER_URB_DEQUEUE handling above?
+		 */
+		dev_dbg(hsotg->dev, "## no QTD queued for channel %d ##\n",
+			chnum);
+		dev_dbg(hsotg->dev,
+			"  hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
+			chan->hcint, hcintmsk, hcint);
+		chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS;
+		disable_hc_int(hsotg, chnum, HCINTMSK_CHHLTD);
+		chan->hcint = 0;
+		return;
+	}
+
+	qtd = list_first_entry(&chan->qh->qtd_list, struct dwc2_qtd,
+			       qtd_list_entry);
+
+	if (!hsotg->params.host_dma) {
+		if ((hcint & HCINTMSK_CHHLTD) && hcint != HCINTMSK_CHHLTD)
+			hcint &= ~HCINTMSK_CHHLTD;
+	}
+
+	if (hcint & HCINTMSK_XFERCOMPL) {
+		dwc2_hc_xfercomp_intr(hsotg, chan, chnum, qtd);
+		/*
+		 * If NYET occurred at same time as Xfer Complete, the NYET is
+		 * handled by the Xfer Complete interrupt handler. Don't want
+		 * to call the NYET interrupt handler in this case.
+		 */
+		hcint &= ~HCINTMSK_NYET;
+	}
+
+	if (hcint & HCINTMSK_CHHLTD) {
+		dwc2_hc_chhltd_intr(hsotg, chan, chnum, qtd);
+		if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_AHBERR) {
+		dwc2_hc_ahberr_intr(hsotg, chan, chnum, qtd);
+		if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_STALL) {
+		dwc2_hc_stall_intr(hsotg, chan, chnum, qtd);
+		if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_NAK) {
+		dwc2_hc_nak_intr(hsotg, chan, chnum, qtd);
+		if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_ACK) {
+		dwc2_hc_ack_intr(hsotg, chan, chnum, qtd);
+		if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_NYET) {
+		dwc2_hc_nyet_intr(hsotg, chan, chnum, qtd);
+		if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_XACTERR) {
+		dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd);
+		if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_BBLERR) {
+		dwc2_hc_babble_intr(hsotg, chan, chnum, qtd);
+		if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_FRMOVRUN) {
+		dwc2_hc_frmovrun_intr(hsotg, chan, chnum, qtd);
+		if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_DATATGLERR) {
+		dwc2_hc_datatglerr_intr(hsotg, chan, chnum, qtd);
+		if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
+			goto exit;
+	}
+
+exit:
+	chan->hcint = 0;
+}
+
+/*
+ * This interrupt indicates that one or more host channels has a pending
+ * interrupt. There are multiple conditions that can cause each host channel
+ * interrupt. This function determines which conditions have occurred for each
+ * host channel interrupt and handles them appropriately.
+ */
+static void dwc2_hc_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 haint;
+	int i;
+	struct dwc2_host_chan *chan, *chan_tmp;
+
+	haint = dwc2_readl(hsotg, HAINT);
+	if (dbg_perio()) {
+		dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+		dev_vdbg(hsotg->dev, "HAINT=%08x\n", haint);
+	}
+
+	/*
+	 * According to USB 2.0 spec section 11.18.8, a host must
+	 * issue complete-split transactions in a microframe for a
+	 * set of full-/low-speed endpoints in the same relative
+	 * order as the start-splits were issued in a microframe for.
+	 */
+	list_for_each_entry_safe(chan, chan_tmp, &hsotg->split_order,
+				 split_order_list_entry) {
+		int hc_num = chan->hc_num;
+
+		if (haint & (1 << hc_num)) {
+			dwc2_hc_n_intr(hsotg, hc_num);
+			haint &= ~(1 << hc_num);
+		}
+	}
+
+	for (i = 0; i < hsotg->params.host_channels; i++) {
+		if (haint & (1 << i))
+			dwc2_hc_n_intr(hsotg, i);
+	}
+}
+
+/* This function handles interrupts for the HCD */
+irqreturn_t dwc2_handle_hcd_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 gintsts, dbg_gintsts;
+	irqreturn_t retval = IRQ_NONE;
+
+	if (!dwc2_is_controller_alive(hsotg)) {
+		dev_warn(hsotg->dev, "Controller is dead\n");
+		return retval;
+	}
+
+	spin_lock(&hsotg->lock);
+
+	/* Check if HOST Mode */
+	if (dwc2_is_host_mode(hsotg)) {
+		gintsts = dwc2_read_core_intr(hsotg);
+		if (!gintsts) {
+			spin_unlock(&hsotg->lock);
+			return retval;
+		}
+
+		retval = IRQ_HANDLED;
+
+		dbg_gintsts = gintsts;
+#ifndef DEBUG_SOF
+		dbg_gintsts &= ~GINTSTS_SOF;
+#endif
+		if (!dbg_perio())
+			dbg_gintsts &= ~(GINTSTS_HCHINT | GINTSTS_RXFLVL |
+					 GINTSTS_PTXFEMP);
+
+		/* Only print if there are any non-suppressed interrupts left */
+		if (dbg_gintsts)
+			dev_vdbg(hsotg->dev,
+				 "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n",
+				 gintsts);
+
+		if (gintsts & GINTSTS_SOF)
+			dwc2_sof_intr(hsotg);
+		if (gintsts & GINTSTS_RXFLVL)
+			dwc2_rx_fifo_level_intr(hsotg);
+		if (gintsts & GINTSTS_NPTXFEMP)
+			dwc2_np_tx_fifo_empty_intr(hsotg);
+		if (gintsts & GINTSTS_PRTINT)
+			dwc2_port_intr(hsotg);
+		if (gintsts & GINTSTS_HCHINT)
+			dwc2_hc_intr(hsotg);
+		if (gintsts & GINTSTS_PTXFEMP)
+			dwc2_perio_tx_fifo_empty_intr(hsotg);
+
+		if (dbg_gintsts) {
+			dev_vdbg(hsotg->dev,
+				 "DWC OTG HCD Finished Servicing Interrupts\n");
+			dev_vdbg(hsotg->dev,
+				 "DWC OTG HCD gintsts=0x%08x gintmsk=0x%08x\n",
+				 dwc2_readl(hsotg, GINTSTS),
+				 dwc2_readl(hsotg, GINTMSK));
+		}
+	}
+
+	spin_unlock(&hsotg->lock);
+
+	return retval;
+}
diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
new file mode 100644
index 000000000..0a1145592
--- /dev/null
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -0,0 +1,2069 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * hcd_queue.c - DesignWare HS OTG Controller host queuing routines
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ */
+
+/*
+ * This file contains the functions to manage Queue Heads and Queue
+ * Transfer Descriptors for Host mode
+ */
+#include <linux/gcd.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+
+#include "core.h"
+#include "hcd.h"
+
+/* Wait this long before releasing periodic reservation */
+#define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5))
+
+/* If we get a NAK, wait this long before retrying */
+#define DWC2_RETRY_WAIT_DELAY (1 * NSEC_PER_MSEC)
+
+/**
+ * dwc2_periodic_channel_available() - Checks that a channel is available for a
+ * periodic transfer
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ *
+ * Return: 0 if successful, negative error code otherwise
+ */
+static int dwc2_periodic_channel_available(struct dwc2_hsotg *hsotg)
+{
+	/*
+	 * Currently assuming that there is a dedicated host channel for
+	 * each periodic transaction plus at least one host channel for
+	 * non-periodic transactions
+	 */
+	int status;
+	int num_channels;
+
+	num_channels = hsotg->params.host_channels;
+	if ((hsotg->periodic_channels + hsotg->non_periodic_channels <
+	     num_channels) && (hsotg->periodic_channels < num_channels - 1)) {
+		status = 0;
+	} else {
+		dev_dbg(hsotg->dev,
+			"%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n",
+			__func__, num_channels,
+			hsotg->periodic_channels, hsotg->non_periodic_channels);
+		status = -ENOSPC;
+	}
+
+	return status;
+}
+
+/**
+ * dwc2_check_periodic_bandwidth() - Checks that there is sufficient bandwidth
+ * for the specified QH in the periodic schedule
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh:    QH containing periodic bandwidth required
+ *
+ * Return: 0 if successful, negative error code otherwise
+ *
+ * For simplicity, this calculation assumes that all the transfers in the
+ * periodic schedule may occur in the same (micro)frame
+ */
+static int dwc2_check_periodic_bandwidth(struct dwc2_hsotg *hsotg,
+					 struct dwc2_qh *qh)
+{
+	int status;
+	s16 max_claimed_usecs;
+
+	status = 0;
+
+	if (qh->dev_speed == USB_SPEED_HIGH || qh->do_split) {
+		/*
+		 * High speed mode
+		 * Max periodic usecs is 80% x 125 usec = 100 usec
+		 */
+		max_claimed_usecs = 100 - qh->host_us;
+	} else {
+		/*
+		 * Full speed mode
+		 * Max periodic usecs is 90% x 1000 usec = 900 usec
+		 */
+		max_claimed_usecs = 900 - qh->host_us;
+	}
+
+	if (hsotg->periodic_usecs > max_claimed_usecs) {
+		dev_err(hsotg->dev,
+			"%s: already claimed usecs %d, required usecs %d\n",
+			__func__, hsotg->periodic_usecs, qh->host_us);
+		status = -ENOSPC;
+	}
+
+	return status;
+}
+
+/**
+ * pmap_schedule() - Schedule time in a periodic bitmap (pmap).
+ *
+ * @map:             The bitmap representing the schedule; will be updated
+ *                   upon success.
+ * @bits_per_period: The schedule represents several periods.  This is how many
+ *                   bits are in each period.  It's assumed that the beginning
+ *                   of the schedule will repeat after its end.
+ * @periods_in_map:  The number of periods in the schedule.
+ * @num_bits:        The number of bits we need per period we want to reserve
+ *                   in this function call.
+ * @interval:        How often we need to be scheduled for the reservation this
+ *                   time.  1 means every period.  2 means every other period.
+ *                   ...you get the picture?
+ * @start:           The bit number to start at.  Normally 0.  Must be within
+ *                   the interval or we return failure right away.
+ * @only_one_period: Normally we'll allow picking a start anywhere within the
+ *                   first interval, since we can still make all repetition
+ *                   requirements by doing that.  However, if you pass true
+ *                   here then we'll return failure if we can't fit within
+ *                   the period that "start" is in.
+ *
+ * The idea here is that we want to schedule time for repeating events that all
+ * want the same resource.  The resource is divided into fixed-sized periods
+ * and the events want to repeat every "interval" periods.  The schedule
+ * granularity is one bit.
+ *
+ * To keep things "simple", we'll represent our schedule with a bitmap that
+ * contains a fixed number of periods.  This gets rid of a lot of complexity
+ * but does mean that we need to handle things specially (and non-ideally) if
+ * the number of the periods in the schedule doesn't match well with the
+ * intervals that we're trying to schedule.
+ *
+ * Here's an explanation of the scheme we'll implement, assuming 8 periods.
+ * - If interval is 1, we need to take up space in each of the 8
+ *   periods we're scheduling.  Easy.
+ * - If interval is 2, we need to take up space in half of the
+ *   periods.  Again, easy.
+ * - If interval is 3, we actually need to fall back to interval 1.
+ *   Why?  Because we might need time in any period.  AKA for the
+ *   first 8 periods, we'll be in slot 0, 3, 6.  Then we'll be
+ *   in slot 1, 4, 7.  Then we'll be in 2, 5.  Then we'll be back to
+ *   0, 3, and 6.  Since we could be in any frame we need to reserve
+ *   for all of them.  Sucks, but that's what you gotta do.  Note that
+ *   if we were instead scheduling 8 * 3 = 24 we'd do much better, but
+ *   then we need more memory and time to do scheduling.
+ * - If interval is 4, easy.
+ * - If interval is 5, we again need interval 1.  The schedule will be
+ *   0, 5, 2, 7, 4, 1, 6, 3, 0
+ * - If interval is 6, we need interval 2.  0, 6, 4, 2.
+ * - If interval is 7, we need interval 1.
+ * - If interval is 8, we need interval 8.
+ *
+ * If you do the math, you'll see that we need to pretend that interval is
+ * equal to the greatest_common_divisor(interval, periods_in_map).
+ *
+ * Note that at the moment this function tends to front-pack the schedule.
+ * In some cases that's really non-ideal (it's hard to schedule things that
+ * need to repeat every period).  In other cases it's perfect (you can easily
+ * schedule bigger, less often repeating things).
+ *
+ * Here's the algorithm in action (8 periods, 5 bits per period):
+ *  |**   |     |**   |     |**   |     |**   |     |   OK 2 bits, intv 2 at 0
+ *  |*****|  ***|*****|  ***|*****|  ***|*****|  ***|   OK 3 bits, intv 3 at 2
+ *  |*****|* ***|*****|  ***|*****|* ***|*****|  ***|   OK 1 bits, intv 4 at 5
+ *  |**   |*    |**   |     |**   |*    |**   |     | Remv 3 bits, intv 3 at 2
+ *  |***  |*    |***  |     |***  |*    |***  |     |   OK 1 bits, intv 6 at 2
+ *  |**** |*  * |**** |   * |**** |*  * |**** |   * |   OK 1 bits, intv 1 at 3
+ *  |**** |**** |**** | *** |**** |**** |**** | *** |   OK 2 bits, intv 2 at 6
+ *  |*****|*****|*****| ****|*****|*****|*****| ****|   OK 1 bits, intv 1 at 4
+ *  |*****|*****|*****| ****|*****|*****|*****| ****| FAIL 1 bits, intv 1
+ *  |  ***|*****|  ***| ****|  ***|*****|  ***| ****| Remv 2 bits, intv 2 at 0
+ *  |  ***| ****|  ***| ****|  ***| ****|  ***| ****| Remv 1 bits, intv 4 at 5
+ *  |   **| ****|   **| ****|   **| ****|   **| ****| Remv 1 bits, intv 6 at 2
+ *  |    *| ** *|    *| ** *|    *| ** *|    *| ** *| Remv 1 bits, intv 1 at 3
+ *  |    *|    *|    *|    *|    *|    *|    *|    *| Remv 2 bits, intv 2 at 6
+ *  |     |     |     |     |     |     |     |     | Remv 1 bits, intv 1 at 4
+ *  |**   |     |**   |     |**   |     |**   |     |   OK 2 bits, intv 2 at 0
+ *  |***  |     |**   |     |***  |     |**   |     |   OK 1 bits, intv 4 at 2
+ *  |*****|     |** **|     |*****|     |** **|     |   OK 2 bits, intv 2 at 3
+ *  |*****|*    |** **|     |*****|*    |** **|     |   OK 1 bits, intv 4 at 5
+ *  |*****|***  |** **| **  |*****|***  |** **| **  |   OK 2 bits, intv 2 at 6
+ *  |*****|*****|** **| ****|*****|*****|** **| ****|   OK 2 bits, intv 2 at 8
+ *  |*****|*****|*****| ****|*****|*****|*****| ****|   OK 1 bits, intv 4 at 12
+ *
+ * This function is pretty generic and could be easily abstracted if anything
+ * needed similar scheduling.
+ *
+ * Returns either -ENOSPC or a >= 0 start bit which should be passed to the
+ * unschedule routine.  The map bitmap will be updated on a non-error result.
+ */
+static int pmap_schedule(unsigned long *map, int bits_per_period,
+			 int periods_in_map, int num_bits,
+			 int interval, int start, bool only_one_period)
+{
+	int interval_bits;
+	int to_reserve;
+	int first_end;
+	int i;
+
+	if (num_bits > bits_per_period)
+		return -ENOSPC;
+
+	/* Adjust interval as per description */
+	interval = gcd(interval, periods_in_map);
+
+	interval_bits = bits_per_period * interval;
+	to_reserve = periods_in_map / interval;
+
+	/* If start has gotten us past interval then we can't schedule */
+	if (start >= interval_bits)
+		return -ENOSPC;
+
+	if (only_one_period)
+		/* Must fit within same period as start; end at begin of next */
+		first_end = (start / bits_per_period + 1) * bits_per_period;
+	else
+		/* Can fit anywhere in the first interval */
+		first_end = interval_bits;
+
+	/*
+	 * We'll try to pick the first repetition, then see if that time
+	 * is free for each of the subsequent repetitions.  If it's not
+	 * we'll adjust the start time for the next search of the first
+	 * repetition.
+	 */
+	while (start + num_bits <= first_end) {
+		int end;
+
+		/* Need to stay within this period */
+		end = (start / bits_per_period + 1) * bits_per_period;
+
+		/* Look for num_bits us in this microframe starting at start */
+		start = bitmap_find_next_zero_area(map, end, start, num_bits,
+						   0);
+
+		/*
+		 * We should get start >= end if we fail.  We might be
+		 * able to check the next microframe depending on the
+		 * interval, so continue on (start already updated).
+		 */
+		if (start >= end) {
+			start = end;
+			continue;
+		}
+
+		/* At this point we have a valid point for first one */
+		for (i = 1; i < to_reserve; i++) {
+			int ith_start = start + interval_bits * i;
+			int ith_end = end + interval_bits * i;
+			int ret;
+
+			/* Use this as a dumb "check if bits are 0" */
+			ret = bitmap_find_next_zero_area(
+				map, ith_start + num_bits, ith_start, num_bits,
+				0);
+
+			/* We got the right place, continue checking */
+			if (ret == ith_start)
+				continue;
+
+			/* Move start up for next time and exit for loop */
+			ith_start = bitmap_find_next_zero_area(
+				map, ith_end, ith_start, num_bits, 0);
+			if (ith_start >= ith_end)
+				/* Need a while new period next time */
+				start = end;
+			else
+				start = ith_start - interval_bits * i;
+			break;
+		}
+
+		/* If didn't exit the for loop with a break, we have success */
+		if (i == to_reserve)
+			break;
+	}
+
+	if (start + num_bits > first_end)
+		return -ENOSPC;
+
+	for (i = 0; i < to_reserve; i++) {
+		int ith_start = start + interval_bits * i;
+
+		bitmap_set(map, ith_start, num_bits);
+	}
+
+	return start;
+}
+
+/**
+ * pmap_unschedule() - Undo work done by pmap_schedule()
+ *
+ * @map:             See pmap_schedule().
+ * @bits_per_period: See pmap_schedule().
+ * @periods_in_map:  See pmap_schedule().
+ * @num_bits:        The number of bits that was passed to schedule.
+ * @interval:        The interval that was passed to schedule.
+ * @start:           The return value from pmap_schedule().
+ */
+static void pmap_unschedule(unsigned long *map, int bits_per_period,
+			    int periods_in_map, int num_bits,
+			    int interval, int start)
+{
+	int interval_bits;
+	int to_release;
+	int i;
+
+	/* Adjust interval as per description in pmap_schedule() */
+	interval = gcd(interval, periods_in_map);
+
+	interval_bits = bits_per_period * interval;
+	to_release = periods_in_map / interval;
+
+	for (i = 0; i < to_release; i++) {
+		int ith_start = start + interval_bits * i;
+
+		bitmap_clear(map, ith_start, num_bits);
+	}
+}
+
+/**
+ * dwc2_get_ls_map() - Get the map used for the given qh
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller.
+ * @qh:    QH for the periodic transfer.
+ *
+ * We'll always get the periodic map out of our TT.  Note that even if we're
+ * running the host straight in low speed / full speed mode it appears as if
+ * a TT is allocated for us, so we'll use it.  If that ever changes we can
+ * add logic here to get a map out of "hsotg" if !qh->do_split.
+ *
+ * Returns: the map or NULL if a map couldn't be found.
+ */
+static unsigned long *dwc2_get_ls_map(struct dwc2_hsotg *hsotg,
+				      struct dwc2_qh *qh)
+{
+	unsigned long *map;
+
+	/* Don't expect to be missing a TT and be doing low speed scheduling */
+	if (WARN_ON(!qh->dwc_tt))
+		return NULL;
+
+	/* Get the map and adjust if this is a multi_tt hub */
+	map = qh->dwc_tt->periodic_bitmaps;
+	if (qh->dwc_tt->usb_tt->multi)
+		map += DWC2_ELEMENTS_PER_LS_BITMAP * (qh->ttport - 1);
+
+	return map;
+}
+
+#ifdef DWC2_PRINT_SCHEDULE
+/*
+ * cat_printf() - A printf() + strcat() helper
+ *
+ * This is useful for concatenating a bunch of strings where each string is
+ * constructed using printf.
+ *
+ * @buf:   The destination buffer; will be updated to point after the printed
+ *         data.
+ * @size:  The number of bytes in the buffer (includes space for '\0').
+ * @fmt:   The format for printf.
+ * @...:   The args for printf.
+ */
+static __printf(3, 4)
+void cat_printf(char **buf, size_t *size, const char *fmt, ...)
+{
+	va_list args;
+	int i;
+
+	if (*size == 0)
+		return;
+
+	va_start(args, fmt);
+	i = vsnprintf(*buf, *size, fmt, args);
+	va_end(args);
+
+	if (i >= *size) {
+		(*buf)[*size - 1] = '\0';
+		*buf += *size;
+		*size = 0;
+	} else {
+		*buf += i;
+		*size -= i;
+	}
+}
+
+/*
+ * pmap_print() - Print the given periodic map
+ *
+ * Will attempt to print out the periodic schedule.
+ *
+ * @map:             See pmap_schedule().
+ * @bits_per_period: See pmap_schedule().
+ * @periods_in_map:  See pmap_schedule().
+ * @period_name:     The name of 1 period, like "uFrame"
+ * @units:           The name of the units, like "us".
+ * @print_fn:        The function to call for printing.
+ * @print_data:      Opaque data to pass to the print function.
+ */
+static void pmap_print(unsigned long *map, int bits_per_period,
+		       int periods_in_map, const char *period_name,
+		       const char *units,
+		       void (*print_fn)(const char *str, void *data),
+		       void *print_data)
+{
+	int period;
+
+	for (period = 0; period < periods_in_map; period++) {
+		char tmp[64];
+		char *buf = tmp;
+		size_t buf_size = sizeof(tmp);
+		int period_start = period * bits_per_period;
+		int period_end = period_start + bits_per_period;
+		int start = 0;
+		int count = 0;
+		bool printed = false;
+		int i;
+
+		for (i = period_start; i < period_end + 1; i++) {
+			/* Handle case when ith bit is set */
+			if (i < period_end &&
+			    bitmap_find_next_zero_area(map, i + 1,
+						       i, 1, 0) != i) {
+				if (count == 0)
+					start = i - period_start;
+				count++;
+				continue;
+			}
+
+			/* ith bit isn't set; don't care if count == 0 */
+			if (count == 0)
+				continue;
+
+			if (!printed)
+				cat_printf(&buf, &buf_size, "%s %d: ",
+					   period_name, period);
+			else
+				cat_printf(&buf, &buf_size, ", ");
+			printed = true;
+
+			cat_printf(&buf, &buf_size, "%d %s -%3d %s", start,
+				   units, start + count - 1, units);
+			count = 0;
+		}
+
+		if (printed)
+			print_fn(tmp, print_data);
+	}
+}
+
+struct dwc2_qh_print_data {
+	struct dwc2_hsotg *hsotg;
+	struct dwc2_qh *qh;
+};
+
+/**
+ * dwc2_qh_print() - Helper function for dwc2_qh_schedule_print()
+ *
+ * @str:  The string to print
+ * @data: A pointer to a struct dwc2_qh_print_data
+ */
+static void dwc2_qh_print(const char *str, void *data)
+{
+	struct dwc2_qh_print_data *print_data = data;
+
+	dwc2_sch_dbg(print_data->hsotg, "QH=%p ...%s\n", print_data->qh, str);
+}
+
+/**
+ * dwc2_qh_schedule_print() - Print the periodic schedule
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller.
+ * @qh:    QH to print.
+ */
+static void dwc2_qh_schedule_print(struct dwc2_hsotg *hsotg,
+				   struct dwc2_qh *qh)
+{
+	struct dwc2_qh_print_data print_data = { hsotg, qh };
+	int i;
+
+	/*
+	 * The printing functions are quite slow and inefficient.
+	 * If we don't have tracing turned on, don't run unless the special
+	 * define is turned on.
+	 */
+
+	if (qh->schedule_low_speed) {
+		unsigned long *map = dwc2_get_ls_map(hsotg, qh);
+
+		dwc2_sch_dbg(hsotg, "QH=%p LS/FS trans: %d=>%d us @ %d us",
+			     qh, qh->device_us,
+			     DWC2_ROUND_US_TO_SLICE(qh->device_us),
+			     DWC2_US_PER_SLICE * qh->ls_start_schedule_slice);
+
+		if (map) {
+			dwc2_sch_dbg(hsotg,
+				     "QH=%p Whole low/full speed map %p now:\n",
+				     qh, map);
+			pmap_print(map, DWC2_LS_PERIODIC_SLICES_PER_FRAME,
+				   DWC2_LS_SCHEDULE_FRAMES, "Frame ", "slices",
+				   dwc2_qh_print, &print_data);
+		}
+	}
+
+	for (i = 0; i < qh->num_hs_transfers; i++) {
+		struct dwc2_hs_transfer_time *trans_time = qh->hs_transfers + i;
+		int uframe = trans_time->start_schedule_us /
+			     DWC2_HS_PERIODIC_US_PER_UFRAME;
+		int rel_us = trans_time->start_schedule_us %
+			     DWC2_HS_PERIODIC_US_PER_UFRAME;
+
+		dwc2_sch_dbg(hsotg,
+			     "QH=%p HS trans #%d: %d us @ uFrame %d + %d us\n",
+			     qh, i, trans_time->duration_us, uframe, rel_us);
+	}
+	if (qh->num_hs_transfers) {
+		dwc2_sch_dbg(hsotg, "QH=%p Whole high speed map now:\n", qh);
+		pmap_print(hsotg->hs_periodic_bitmap,
+			   DWC2_HS_PERIODIC_US_PER_UFRAME,
+			   DWC2_HS_SCHEDULE_UFRAMES, "uFrame", "us",
+			   dwc2_qh_print, &print_data);
+	}
+}
+#else
+static inline void dwc2_qh_schedule_print(struct dwc2_hsotg *hsotg,
+					  struct dwc2_qh *qh) {};
+#endif
+
+/**
+ * dwc2_ls_pmap_schedule() - Schedule a low speed QH
+ *
+ * @hsotg:        The HCD state structure for the DWC OTG controller.
+ * @qh:           QH for the periodic transfer.
+ * @search_slice: We'll start trying to schedule at the passed slice.
+ *                Remember that slices are the units of the low speed
+ *                schedule (think 25us or so).
+ *
+ * Wraps pmap_schedule() with the right parameters for low speed scheduling.
+ *
+ * Normally we schedule low speed devices on the map associated with the TT.
+ *
+ * Returns: 0 for success or an error code.
+ */
+static int dwc2_ls_pmap_schedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+				 int search_slice)
+{
+	int slices = DIV_ROUND_UP(qh->device_us, DWC2_US_PER_SLICE);
+	unsigned long *map = dwc2_get_ls_map(hsotg, qh);
+	int slice;
+
+	if (!map)
+		return -EINVAL;
+
+	/*
+	 * Schedule on the proper low speed map with our low speed scheduling
+	 * parameters.  Note that we use the "device_interval" here since
+	 * we want the low speed interval and the only way we'd be in this
+	 * function is if the device is low speed.
+	 *
+	 * If we happen to be doing low speed and high speed scheduling for the
+	 * same transaction (AKA we have a split) we always do low speed first.
+	 * That means we can always pass "false" for only_one_period (that
+	 * parameters is only useful when we're trying to get one schedule to
+	 * match what we already planned in the other schedule).
+	 */
+	slice = pmap_schedule(map, DWC2_LS_PERIODIC_SLICES_PER_FRAME,
+			      DWC2_LS_SCHEDULE_FRAMES, slices,
+			      qh->device_interval, search_slice, false);
+
+	if (slice < 0)
+		return slice;
+
+	qh->ls_start_schedule_slice = slice;
+	return 0;
+}
+
+/**
+ * dwc2_ls_pmap_unschedule() - Undo work done by dwc2_ls_pmap_schedule()
+ *
+ * @hsotg:       The HCD state structure for the DWC OTG controller.
+ * @qh:          QH for the periodic transfer.
+ */
+static void dwc2_ls_pmap_unschedule(struct dwc2_hsotg *hsotg,
+				    struct dwc2_qh *qh)
+{
+	int slices = DIV_ROUND_UP(qh->device_us, DWC2_US_PER_SLICE);
+	unsigned long *map = dwc2_get_ls_map(hsotg, qh);
+
+	/* Schedule should have failed, so no worries about no error code */
+	if (!map)
+		return;
+
+	pmap_unschedule(map, DWC2_LS_PERIODIC_SLICES_PER_FRAME,
+			DWC2_LS_SCHEDULE_FRAMES, slices, qh->device_interval,
+			qh->ls_start_schedule_slice);
+}
+
+/**
+ * dwc2_hs_pmap_schedule - Schedule in the main high speed schedule
+ *
+ * This will schedule something on the main dwc2 schedule.
+ *
+ * We'll start looking in qh->hs_transfers[index].start_schedule_us.  We'll
+ * update this with the result upon success.  We also use the duration from
+ * the same structure.
+ *
+ * @hsotg:           The HCD state structure for the DWC OTG controller.
+ * @qh:              QH for the periodic transfer.
+ * @only_one_period: If true we will limit ourselves to just looking at
+ *                   one period (aka one 100us chunk).  This is used if we have
+ *                   already scheduled something on the low speed schedule and
+ *                   need to find something that matches on the high speed one.
+ * @index:           The index into qh->hs_transfers that we're working with.
+ *
+ * Returns: 0 for success or an error code.  Upon success the
+ *          dwc2_hs_transfer_time specified by "index" will be updated.
+ */
+static int dwc2_hs_pmap_schedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+				 bool only_one_period, int index)
+{
+	struct dwc2_hs_transfer_time *trans_time = qh->hs_transfers + index;
+	int us;
+
+	us = pmap_schedule(hsotg->hs_periodic_bitmap,
+			   DWC2_HS_PERIODIC_US_PER_UFRAME,
+			   DWC2_HS_SCHEDULE_UFRAMES, trans_time->duration_us,
+			   qh->host_interval, trans_time->start_schedule_us,
+			   only_one_period);
+
+	if (us < 0)
+		return us;
+
+	trans_time->start_schedule_us = us;
+	return 0;
+}
+
+/**
+ * dwc2_hs_pmap_unschedule() - Undo work done by dwc2_hs_pmap_schedule()
+ *
+ * @hsotg:       The HCD state structure for the DWC OTG controller.
+ * @qh:          QH for the periodic transfer.
+ * @index:       Transfer index
+ */
+static void dwc2_hs_pmap_unschedule(struct dwc2_hsotg *hsotg,
+				    struct dwc2_qh *qh, int index)
+{
+	struct dwc2_hs_transfer_time *trans_time = qh->hs_transfers + index;
+
+	pmap_unschedule(hsotg->hs_periodic_bitmap,
+			DWC2_HS_PERIODIC_US_PER_UFRAME,
+			DWC2_HS_SCHEDULE_UFRAMES, trans_time->duration_us,
+			qh->host_interval, trans_time->start_schedule_us);
+}
+
+/**
+ * dwc2_uframe_schedule_split - Schedule a QH for a periodic split xfer.
+ *
+ * This is the most complicated thing in USB.  We have to find matching time
+ * in both the global high speed schedule for the port and the low speed
+ * schedule for the TT associated with the given device.
+ *
+ * Being here means that the host must be running in high speed mode and the
+ * device is in low or full speed mode (and behind a hub).
+ *
+ * @hsotg:       The HCD state structure for the DWC OTG controller.
+ * @qh:          QH for the periodic transfer.
+ */
+static int dwc2_uframe_schedule_split(struct dwc2_hsotg *hsotg,
+				      struct dwc2_qh *qh)
+{
+	int bytecount = qh->maxp_mult * qh->maxp;
+	int ls_search_slice;
+	int err = 0;
+	int host_interval_in_sched;
+
+	/*
+	 * The interval (how often to repeat) in the actual host schedule.
+	 * See pmap_schedule() for gcd() explanation.
+	 */
+	host_interval_in_sched = gcd(qh->host_interval,
+				     DWC2_HS_SCHEDULE_UFRAMES);
+
+	/*
+	 * We always try to find space in the low speed schedule first, then
+	 * try to find high speed time that matches.  If we don't, we'll bump
+	 * up the place we start searching in the low speed schedule and try
+	 * again.  To start we'll look right at the beginning of the low speed
+	 * schedule.
+	 *
+	 * Note that this will tend to front-load the high speed schedule.
+	 * We may eventually want to try to avoid this by either considering
+	 * both schedules together or doing some sort of round robin.
+	 */
+	ls_search_slice = 0;
+
+	while (ls_search_slice < DWC2_LS_SCHEDULE_SLICES) {
+		int start_s_uframe;
+		int ssplit_s_uframe;
+		int second_s_uframe;
+		int rel_uframe;
+		int first_count;
+		int middle_count;
+		int end_count;
+		int first_data_bytes;
+		int other_data_bytes;
+		int i;
+
+		if (qh->schedule_low_speed) {
+			err = dwc2_ls_pmap_schedule(hsotg, qh, ls_search_slice);
+
+			/*
+			 * If we got an error here there's no other magic we
+			 * can do, so bail.  All the looping above is only
+			 * helpful to redo things if we got a low speed slot
+			 * and then couldn't find a matching high speed slot.
+			 */
+			if (err)
+				return err;
+		} else {
+			/* Must be missing the tt structure?  Why? */
+			WARN_ON_ONCE(1);
+		}
+
+		/*
+		 * This will give us a number 0 - 7 if
+		 * DWC2_LS_SCHEDULE_FRAMES == 1, or 0 - 15 if == 2, or ...
+		 */
+		start_s_uframe = qh->ls_start_schedule_slice /
+				 DWC2_SLICES_PER_UFRAME;
+
+		/* Get a number that's always 0 - 7 */
+		rel_uframe = (start_s_uframe % 8);
+
+		/*
+		 * If we were going to start in uframe 7 then we would need to
+		 * issue a start split in uframe 6, which spec says is not OK.
+		 * Move on to the next full frame (assuming there is one).
+		 *
+		 * See 11.18.4 Host Split Transaction Scheduling Requirements
+		 * bullet 1.
+		 */
+		if (rel_uframe == 7) {
+			if (qh->schedule_low_speed)
+				dwc2_ls_pmap_unschedule(hsotg, qh);
+			ls_search_slice =
+				(qh->ls_start_schedule_slice /
+				 DWC2_LS_PERIODIC_SLICES_PER_FRAME + 1) *
+				DWC2_LS_PERIODIC_SLICES_PER_FRAME;
+			continue;
+		}
+
+		/*
+		 * For ISOC in:
+		 * - start split            (frame -1)
+		 * - complete split w/ data (frame +1)
+		 * - complete split w/ data (frame +2)
+		 * - ...
+		 * - complete split w/ data (frame +num_data_packets)
+		 * - complete split w/ data (frame +num_data_packets+1)
+		 * - complete split w/ data (frame +num_data_packets+2, max 8)
+		 *   ...though if frame was "0" then max is 7...
+		 *
+		 * For ISOC out we might need to do:
+		 * - start split w/ data    (frame -1)
+		 * - start split w/ data    (frame +0)
+		 * - ...
+		 * - start split w/ data    (frame +num_data_packets-2)
+		 *
+		 * For INTERRUPT in we might need to do:
+		 * - start split            (frame -1)
+		 * - complete split w/ data (frame +1)
+		 * - complete split w/ data (frame +2)
+		 * - complete split w/ data (frame +3, max 8)
+		 *
+		 * For INTERRUPT out we might need to do:
+		 * - start split w/ data    (frame -1)
+		 * - complete split         (frame +1)
+		 * - complete split         (frame +2)
+		 * - complete split         (frame +3, max 8)
+		 *
+		 * Start adjusting!
+		 */
+		ssplit_s_uframe = (start_s_uframe +
+				   host_interval_in_sched - 1) %
+				  host_interval_in_sched;
+		if (qh->ep_type == USB_ENDPOINT_XFER_ISOC && !qh->ep_is_in)
+			second_s_uframe = start_s_uframe;
+		else
+			second_s_uframe = start_s_uframe + 1;
+
+		/* First data transfer might not be all 188 bytes. */
+		first_data_bytes = 188 -
+			DIV_ROUND_UP(188 * (qh->ls_start_schedule_slice %
+					    DWC2_SLICES_PER_UFRAME),
+				     DWC2_SLICES_PER_UFRAME);
+		if (first_data_bytes > bytecount)
+			first_data_bytes = bytecount;
+		other_data_bytes = bytecount - first_data_bytes;
+
+		/*
+		 * For now, skip OUT xfers where first xfer is partial
+		 *
+		 * Main dwc2 code assumes:
+		 * - INT transfers never get split in two.
+		 * - ISOC transfers can always transfer 188 bytes the first
+		 *   time.
+		 *
+		 * Until that code is fixed, try again if the first transfer
+		 * couldn't transfer everything.
+		 *
+		 * This code can be removed if/when the rest of dwc2 handles
+		 * the above cases.  Until it's fixed we just won't be able
+		 * to schedule quite as tightly.
+		 */
+		if (!qh->ep_is_in &&
+		    (first_data_bytes != min_t(int, 188, bytecount))) {
+			dwc2_sch_dbg(hsotg,
+				     "QH=%p avoiding broken 1st xfer (%d, %d)\n",
+				     qh, first_data_bytes, bytecount);
+			if (qh->schedule_low_speed)
+				dwc2_ls_pmap_unschedule(hsotg, qh);
+			ls_search_slice = (start_s_uframe + 1) *
+				DWC2_SLICES_PER_UFRAME;
+			continue;
+		}
+
+		/* Start by assuming transfers for the bytes */
+		qh->num_hs_transfers = 1 + DIV_ROUND_UP(other_data_bytes, 188);
+
+		/*
+		 * Everything except ISOC OUT has extra transfers.  Rules are
+		 * complicated.  See 11.18.4 Host Split Transaction Scheduling
+		 * Requirements bullet 3.
+		 */
+		if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
+			if (rel_uframe == 6)
+				qh->num_hs_transfers += 2;
+			else
+				qh->num_hs_transfers += 3;
+
+			if (qh->ep_is_in) {
+				/*
+				 * First is start split, middle/end is data.
+				 * Allocate full data bytes for all data.
+				 */
+				first_count = 4;
+				middle_count = bytecount;
+				end_count = bytecount;
+			} else {
+				/*
+				 * First is data, middle/end is complete.
+				 * First transfer and second can have data.
+				 * Rest should just have complete split.
+				 */
+				first_count = first_data_bytes;
+				middle_count = max_t(int, 4, other_data_bytes);
+				end_count = 4;
+			}
+		} else {
+			if (qh->ep_is_in) {
+				int last;
+
+				/* Account for the start split */
+				qh->num_hs_transfers++;
+
+				/* Calculate "L" value from spec */
+				last = rel_uframe + qh->num_hs_transfers + 1;
+
+				/* Start with basic case */
+				if (last <= 6)
+					qh->num_hs_transfers += 2;
+				else
+					qh->num_hs_transfers += 1;
+
+				/* Adjust downwards */
+				if (last >= 6 && rel_uframe == 0)
+					qh->num_hs_transfers--;
+
+				/* 1st = start; rest can contain data */
+				first_count = 4;
+				middle_count = min_t(int, 188, bytecount);
+				end_count = middle_count;
+			} else {
+				/* All contain data, last might be smaller */
+				first_count = first_data_bytes;
+				middle_count = min_t(int, 188,
+						     other_data_bytes);
+				end_count = other_data_bytes % 188;
+			}
+		}
+
+		/* Assign durations per uFrame */
+		qh->hs_transfers[0].duration_us = HS_USECS_ISO(first_count);
+		for (i = 1; i < qh->num_hs_transfers - 1; i++)
+			qh->hs_transfers[i].duration_us =
+				HS_USECS_ISO(middle_count);
+		if (qh->num_hs_transfers > 1)
+			qh->hs_transfers[qh->num_hs_transfers - 1].duration_us =
+				HS_USECS_ISO(end_count);
+
+		/*
+		 * Assign start us.  The call below to dwc2_hs_pmap_schedule()
+		 * will start with these numbers but may adjust within the same
+		 * microframe.
+		 */
+		qh->hs_transfers[0].start_schedule_us =
+			ssplit_s_uframe * DWC2_HS_PERIODIC_US_PER_UFRAME;
+		for (i = 1; i < qh->num_hs_transfers; i++)
+			qh->hs_transfers[i].start_schedule_us =
+				((second_s_uframe + i - 1) %
+				 DWC2_HS_SCHEDULE_UFRAMES) *
+				DWC2_HS_PERIODIC_US_PER_UFRAME;
+
+		/* Try to schedule with filled in hs_transfers above */
+		for (i = 0; i < qh->num_hs_transfers; i++) {
+			err = dwc2_hs_pmap_schedule(hsotg, qh, true, i);
+			if (err)
+				break;
+		}
+
+		/* If we scheduled all w/out breaking out then we're all good */
+		if (i == qh->num_hs_transfers)
+			break;
+
+		for (; i >= 0; i--)
+			dwc2_hs_pmap_unschedule(hsotg, qh, i);
+
+		if (qh->schedule_low_speed)
+			dwc2_ls_pmap_unschedule(hsotg, qh);
+
+		/* Try again starting in the next microframe */
+		ls_search_slice = (start_s_uframe + 1) * DWC2_SLICES_PER_UFRAME;
+	}
+
+	if (ls_search_slice >= DWC2_LS_SCHEDULE_SLICES)
+		return -ENOSPC;
+
+	return 0;
+}
+
+/**
+ * dwc2_uframe_schedule_hs - Schedule a QH for a periodic high speed xfer.
+ *
+ * Basically this just wraps dwc2_hs_pmap_schedule() to provide a clean
+ * interface.
+ *
+ * @hsotg:       The HCD state structure for the DWC OTG controller.
+ * @qh:          QH for the periodic transfer.
+ */
+static int dwc2_uframe_schedule_hs(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	/* In non-split host and device time are the same */
+	WARN_ON(qh->host_us != qh->device_us);
+	WARN_ON(qh->host_interval != qh->device_interval);
+	WARN_ON(qh->num_hs_transfers != 1);
+
+	/* We'll have one transfer; init start to 0 before calling scheduler */
+	qh->hs_transfers[0].start_schedule_us = 0;
+	qh->hs_transfers[0].duration_us = qh->host_us;
+
+	return dwc2_hs_pmap_schedule(hsotg, qh, false, 0);
+}
+
+/**
+ * dwc2_uframe_schedule_ls - Schedule a QH for a periodic low/full speed xfer.
+ *
+ * Basically this just wraps dwc2_ls_pmap_schedule() to provide a clean
+ * interface.
+ *
+ * @hsotg:       The HCD state structure for the DWC OTG controller.
+ * @qh:          QH for the periodic transfer.
+ */
+static int dwc2_uframe_schedule_ls(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	/* In non-split host and device time are the same */
+	WARN_ON(qh->host_us != qh->device_us);
+	WARN_ON(qh->host_interval != qh->device_interval);
+	WARN_ON(!qh->schedule_low_speed);
+
+	/* Run on the main low speed schedule (no split = no hub = no TT) */
+	return dwc2_ls_pmap_schedule(hsotg, qh, 0);
+}
+
+/**
+ * dwc2_uframe_schedule - Schedule a QH for a periodic xfer.
+ *
+ * Calls one of the 3 sub-function depending on what type of transfer this QH
+ * is for.  Also adds some printing.
+ *
+ * @hsotg:       The HCD state structure for the DWC OTG controller.
+ * @qh:          QH for the periodic transfer.
+ */
+static int dwc2_uframe_schedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	int ret;
+
+	if (qh->dev_speed == USB_SPEED_HIGH)
+		ret = dwc2_uframe_schedule_hs(hsotg, qh);
+	else if (!qh->do_split)
+		ret = dwc2_uframe_schedule_ls(hsotg, qh);
+	else
+		ret = dwc2_uframe_schedule_split(hsotg, qh);
+
+	if (ret)
+		dwc2_sch_dbg(hsotg, "QH=%p Failed to schedule %d\n", qh, ret);
+	else
+		dwc2_qh_schedule_print(hsotg, qh);
+
+	return ret;
+}
+
+/**
+ * dwc2_uframe_unschedule - Undoes dwc2_uframe_schedule().
+ *
+ * @hsotg:       The HCD state structure for the DWC OTG controller.
+ * @qh:          QH for the periodic transfer.
+ */
+static void dwc2_uframe_unschedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	int i;
+
+	for (i = 0; i < qh->num_hs_transfers; i++)
+		dwc2_hs_pmap_unschedule(hsotg, qh, i);
+
+	if (qh->schedule_low_speed)
+		dwc2_ls_pmap_unschedule(hsotg, qh);
+
+	dwc2_sch_dbg(hsotg, "QH=%p Unscheduled\n", qh);
+}
+
+/**
+ * dwc2_pick_first_frame() - Choose 1st frame for qh that's already scheduled
+ *
+ * Takes a qh that has already been scheduled (which means we know we have the
+ * bandwdith reserved for us) and set the next_active_frame and the
+ * start_active_frame.
+ *
+ * This is expected to be called on qh's that weren't previously actively
+ * running.  It just picks the next frame that we can fit into without any
+ * thought about the past.
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh:    QH for a periodic endpoint
+ *
+ */
+static void dwc2_pick_first_frame(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	u16 frame_number;
+	u16 earliest_frame;
+	u16 next_active_frame;
+	u16 relative_frame;
+	u16 interval;
+
+	/*
+	 * Use the real frame number rather than the cached value as of the
+	 * last SOF to give us a little extra slop.
+	 */
+	frame_number = dwc2_hcd_get_frame_number(hsotg);
+
+	/*
+	 * We wouldn't want to start any earlier than the next frame just in
+	 * case the frame number ticks as we're doing this calculation.
+	 *
+	 * NOTE: if we could quantify how long till we actually get scheduled
+	 * we might be able to avoid the "+ 1" by looking at the upper part of
+	 * HFNUM (the FRREM field).  For now we'll just use the + 1 though.
+	 */
+	earliest_frame = dwc2_frame_num_inc(frame_number, 1);
+	next_active_frame = earliest_frame;
+
+	/* Get the "no microframe schduler" out of the way... */
+	if (!hsotg->params.uframe_sched) {
+		if (qh->do_split)
+			/* Splits are active at microframe 0 minus 1 */
+			next_active_frame |= 0x7;
+		goto exit;
+	}
+
+	if (qh->dev_speed == USB_SPEED_HIGH || qh->do_split) {
+		/*
+		 * We're either at high speed or we're doing a split (which
+		 * means we're talking high speed to a hub).  In any case
+		 * the first frame should be based on when the first scheduled
+		 * event is.
+		 */
+		WARN_ON(qh->num_hs_transfers < 1);
+
+		relative_frame = qh->hs_transfers[0].start_schedule_us /
+				 DWC2_HS_PERIODIC_US_PER_UFRAME;
+
+		/* Adjust interval as per high speed schedule */
+		interval = gcd(qh->host_interval, DWC2_HS_SCHEDULE_UFRAMES);
+
+	} else {
+		/*
+		 * Low or full speed directly on dwc2.  Just about the same
+		 * as high speed but on a different schedule and with slightly
+		 * different adjustments.  Note that this works because when
+		 * the host and device are both low speed then frames in the
+		 * controller tick at low speed.
+		 */
+		relative_frame = qh->ls_start_schedule_slice /
+				 DWC2_LS_PERIODIC_SLICES_PER_FRAME;
+		interval = gcd(qh->host_interval, DWC2_LS_SCHEDULE_FRAMES);
+	}
+
+	/* Scheduler messed up if frame is past interval */
+	WARN_ON(relative_frame >= interval);
+
+	/*
+	 * We know interval must divide (HFNUM_MAX_FRNUM + 1) now that we've
+	 * done the gcd(), so it's safe to move to the beginning of the current
+	 * interval like this.
+	 *
+	 * After this we might be before earliest_frame, but don't worry,
+	 * we'll fix it...
+	 */
+	next_active_frame = (next_active_frame / interval) * interval;
+
+	/*
+	 * Actually choose to start at the frame number we've been
+	 * scheduled for.
+	 */
+	next_active_frame = dwc2_frame_num_inc(next_active_frame,
+					       relative_frame);
+
+	/*
+	 * We actually need 1 frame before since the next_active_frame is
+	 * the frame number we'll be put on the ready list and we won't be on
+	 * the bus until 1 frame later.
+	 */
+	next_active_frame = dwc2_frame_num_dec(next_active_frame, 1);
+
+	/*
+	 * By now we might actually be before the earliest_frame.  Let's move
+	 * up intervals until we're not.
+	 */
+	while (dwc2_frame_num_gt(earliest_frame, next_active_frame))
+		next_active_frame = dwc2_frame_num_inc(next_active_frame,
+						       interval);
+
+exit:
+	qh->next_active_frame = next_active_frame;
+	qh->start_active_frame = next_active_frame;
+
+	dwc2_sch_vdbg(hsotg, "QH=%p First fn=%04x nxt=%04x\n",
+		      qh, frame_number, qh->next_active_frame);
+}
+
+/**
+ * dwc2_do_reserve() - Make a periodic reservation
+ *
+ * Try to allocate space in the periodic schedule.  Depending on parameters
+ * this might use the microframe scheduler or the dumb scheduler.
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh:    QH for the periodic transfer.
+ *
+ * Returns: 0 upon success; error upon failure.
+ */
+static int dwc2_do_reserve(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	int status;
+
+	if (hsotg->params.uframe_sched) {
+		status = dwc2_uframe_schedule(hsotg, qh);
+	} else {
+		status = dwc2_periodic_channel_available(hsotg);
+		if (status) {
+			dev_info(hsotg->dev,
+				 "%s: No host channel available for periodic transfer\n",
+				 __func__);
+			return status;
+		}
+
+		status = dwc2_check_periodic_bandwidth(hsotg, qh);
+	}
+
+	if (status) {
+		dev_dbg(hsotg->dev,
+			"%s: Insufficient periodic bandwidth for periodic transfer\n",
+			__func__);
+		return status;
+	}
+
+	if (!hsotg->params.uframe_sched)
+		/* Reserve periodic channel */
+		hsotg->periodic_channels++;
+
+	/* Update claimed usecs per (micro)frame */
+	hsotg->periodic_usecs += qh->host_us;
+
+	dwc2_pick_first_frame(hsotg, qh);
+
+	return 0;
+}
+
+/**
+ * dwc2_do_unreserve() - Actually release the periodic reservation
+ *
+ * This function actually releases the periodic bandwidth that was reserved
+ * by the given qh.
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh:    QH for the periodic transfer.
+ */
+static void dwc2_do_unreserve(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	assert_spin_locked(&hsotg->lock);
+
+	WARN_ON(!qh->unreserve_pending);
+
+	/* No more unreserve pending--we're doing it */
+	qh->unreserve_pending = false;
+
+	if (WARN_ON(!list_empty(&qh->qh_list_entry)))
+		list_del_init(&qh->qh_list_entry);
+
+	/* Update claimed usecs per (micro)frame */
+	hsotg->periodic_usecs -= qh->host_us;
+
+	if (hsotg->params.uframe_sched) {
+		dwc2_uframe_unschedule(hsotg, qh);
+	} else {
+		/* Release periodic channel reservation */
+		hsotg->periodic_channels--;
+	}
+}
+
+/**
+ * dwc2_unreserve_timer_fn() - Timer function to release periodic reservation
+ *
+ * According to the kernel doc for usb_submit_urb() (specifically the part about
+ * "Reserved Bandwidth Transfers"), we need to keep a reservation active as
+ * long as a device driver keeps submitting.  Since we're using HCD_BH to give
+ * back the URB we need to give the driver a little bit of time before we
+ * release the reservation.  This worker is called after the appropriate
+ * delay.
+ *
+ * @t: Address to a qh unreserve_work.
+ */
+static void dwc2_unreserve_timer_fn(struct timer_list *t)
+{
+	struct dwc2_qh *qh = from_timer(qh, t, unreserve_timer);
+	struct dwc2_hsotg *hsotg = qh->hsotg;
+	unsigned long flags;
+
+	/*
+	 * Wait for the lock, or for us to be scheduled again.  We
+	 * could be scheduled again if:
+	 * - We started executing but didn't get the lock yet.
+	 * - A new reservation came in, but cancel didn't take effect
+	 *   because we already started executing.
+	 * - The timer has been kicked again.
+	 * In that case cancel and wait for the next call.
+	 */
+	while (!spin_trylock_irqsave(&hsotg->lock, flags)) {
+		if (timer_pending(&qh->unreserve_timer))
+			return;
+	}
+
+	/*
+	 * Might be no more unreserve pending if:
+	 * - We started executing but didn't get the lock yet.
+	 * - A new reservation came in, but cancel didn't take effect
+	 *   because we already started executing.
+	 *
+	 * We can't put this in the loop above because unreserve_pending needs
+	 * to be accessed under lock, so we can only check it once we got the
+	 * lock.
+	 */
+	if (qh->unreserve_pending)
+		dwc2_do_unreserve(hsotg, qh);
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+/**
+ * dwc2_check_max_xfer_size() - Checks that the max transfer size allowed in a
+ * host channel is large enough to handle the maximum data transfer in a single
+ * (micro)frame for a periodic transfer
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh:    QH for a periodic endpoint
+ *
+ * Return: 0 if successful, negative error code otherwise
+ */
+static int dwc2_check_max_xfer_size(struct dwc2_hsotg *hsotg,
+				    struct dwc2_qh *qh)
+{
+	u32 max_xfer_size;
+	u32 max_channel_xfer_size;
+	int status = 0;
+
+	max_xfer_size = qh->maxp * qh->maxp_mult;
+	max_channel_xfer_size = hsotg->params.max_transfer_size;
+
+	if (max_xfer_size > max_channel_xfer_size) {
+		dev_err(hsotg->dev,
+			"%s: Periodic xfer length %d > max xfer length for channel %d\n",
+			__func__, max_xfer_size, max_channel_xfer_size);
+		status = -ENOSPC;
+	}
+
+	return status;
+}
+
+/**
+ * dwc2_schedule_periodic() - Schedules an interrupt or isochronous transfer in
+ * the periodic schedule
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh:    QH for the periodic transfer. The QH should already contain the
+ *         scheduling information.
+ *
+ * Return: 0 if successful, negative error code otherwise
+ */
+static int dwc2_schedule_periodic(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	int status;
+
+	status = dwc2_check_max_xfer_size(hsotg, qh);
+	if (status) {
+		dev_dbg(hsotg->dev,
+			"%s: Channel max transfer size too small for periodic transfer\n",
+			__func__);
+		return status;
+	}
+
+	/* Cancel pending unreserve; if canceled OK, unreserve was pending */
+	if (del_timer(&qh->unreserve_timer))
+		WARN_ON(!qh->unreserve_pending);
+
+	/*
+	 * Only need to reserve if there's not an unreserve pending, since if an
+	 * unreserve is pending then by definition our old reservation is still
+	 * valid.  Unreserve might still be pending even if we didn't cancel if
+	 * dwc2_unreserve_timer_fn() already started.  Code in the timer handles
+	 * that case.
+	 */
+	if (!qh->unreserve_pending) {
+		status = dwc2_do_reserve(hsotg, qh);
+		if (status)
+			return status;
+	} else {
+		/*
+		 * It might have been a while, so make sure that frame_number
+		 * is still good.  Note: we could also try to use the similar
+		 * dwc2_next_periodic_start() but that schedules much more
+		 * tightly and we might need to hurry and queue things up.
+		 */
+		if (dwc2_frame_num_le(qh->next_active_frame,
+				      hsotg->frame_number))
+			dwc2_pick_first_frame(hsotg, qh);
+	}
+
+	qh->unreserve_pending = 0;
+
+	if (hsotg->params.dma_desc_enable)
+		/* Don't rely on SOF and start in ready schedule */
+		list_add_tail(&qh->qh_list_entry, &hsotg->periodic_sched_ready);
+	else
+		/* Always start in inactive schedule */
+		list_add_tail(&qh->qh_list_entry,
+			      &hsotg->periodic_sched_inactive);
+
+	return 0;
+}
+
+/**
+ * dwc2_deschedule_periodic() - Removes an interrupt or isochronous transfer
+ * from the periodic schedule
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh:	   QH for the periodic transfer
+ */
+static void dwc2_deschedule_periodic(struct dwc2_hsotg *hsotg,
+				     struct dwc2_qh *qh)
+{
+	bool did_modify;
+
+	assert_spin_locked(&hsotg->lock);
+
+	/*
+	 * Schedule the unreserve to happen in a little bit.  Cases here:
+	 * - Unreserve worker might be sitting there waiting to grab the lock.
+	 *   In this case it will notice it's been schedule again and will
+	 *   quit.
+	 * - Unreserve worker might not be scheduled.
+	 *
+	 * We should never already be scheduled since dwc2_schedule_periodic()
+	 * should have canceled the scheduled unreserve timer (hence the
+	 * warning on did_modify).
+	 *
+	 * We add + 1 to the timer to guarantee that at least 1 jiffy has
+	 * passed (otherwise if the jiffy counter might tick right after we
+	 * read it and we'll get no delay).
+	 */
+	did_modify = mod_timer(&qh->unreserve_timer,
+			       jiffies + DWC2_UNRESERVE_DELAY + 1);
+	WARN_ON(did_modify);
+	qh->unreserve_pending = 1;
+
+	list_del_init(&qh->qh_list_entry);
+}
+
+/**
+ * dwc2_wait_timer_fn() - Timer function to re-queue after waiting
+ *
+ * As per the spec, a NAK indicates that "a function is temporarily unable to
+ * transmit or receive data, but will eventually be able to do so without need
+ * of host intervention".
+ *
+ * That means that when we encounter a NAK we're supposed to retry.
+ *
+ * ...but if we retry right away (from the interrupt handler that saw the NAK)
+ * then we can end up with an interrupt storm (if the other side keeps NAKing
+ * us) because on slow enough CPUs it could take us longer to get out of the
+ * interrupt routine than it takes for the device to send another NAK.  That
+ * leads to a constant stream of NAK interrupts and the CPU locks.
+ *
+ * ...so instead of retrying right away in the case of a NAK we'll set a timer
+ * to retry some time later.  This function handles that timer and moves the
+ * qh back to the "inactive" list, then queues transactions.
+ *
+ * @t: Pointer to wait_timer in a qh.
+ *
+ * Return: HRTIMER_NORESTART to not automatically restart this timer.
+ */
+static enum hrtimer_restart dwc2_wait_timer_fn(struct hrtimer *t)
+{
+	struct dwc2_qh *qh = container_of(t, struct dwc2_qh, wait_timer);
+	struct dwc2_hsotg *hsotg = qh->hsotg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	/*
+	 * We'll set wait_timer_cancel to true if we want to cancel this
+	 * operation in dwc2_hcd_qh_unlink().
+	 */
+	if (!qh->wait_timer_cancel) {
+		enum dwc2_transaction_type tr_type;
+
+		qh->want_wait = false;
+
+		list_move(&qh->qh_list_entry,
+			  &hsotg->non_periodic_sched_inactive);
+
+		tr_type = dwc2_hcd_select_transactions(hsotg);
+		if (tr_type != DWC2_TRANSACTION_NONE)
+			dwc2_hcd_queue_transactions(hsotg, tr_type);
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	return HRTIMER_NORESTART;
+}
+
+/**
+ * dwc2_qh_init() - Initializes a QH structure
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh:    The QH to init
+ * @urb:   Holds the information about the device/endpoint needed to initialize
+ *         the QH
+ * @mem_flags: Flags for allocating memory.
+ */
+static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+			 struct dwc2_hcd_urb *urb, gfp_t mem_flags)
+{
+	int dev_speed = dwc2_host_get_speed(hsotg, urb->priv);
+	u8 ep_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
+	bool ep_is_in = !!dwc2_hcd_is_pipe_in(&urb->pipe_info);
+	bool ep_is_isoc = (ep_type == USB_ENDPOINT_XFER_ISOC);
+	bool ep_is_int = (ep_type == USB_ENDPOINT_XFER_INT);
+	u32 hprt = dwc2_readl(hsotg, HPRT0);
+	u32 prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
+	bool do_split = (prtspd == HPRT0_SPD_HIGH_SPEED &&
+			 dev_speed != USB_SPEED_HIGH);
+	int maxp = dwc2_hcd_get_maxp(&urb->pipe_info);
+	int maxp_mult = dwc2_hcd_get_maxp_mult(&urb->pipe_info);
+	int bytecount = maxp_mult * maxp;
+	char *speed, *type;
+
+	/* Initialize QH */
+	qh->hsotg = hsotg;
+	timer_setup(&qh->unreserve_timer, dwc2_unreserve_timer_fn, 0);
+	hrtimer_init(&qh->wait_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	qh->wait_timer.function = &dwc2_wait_timer_fn;
+	qh->ep_type = ep_type;
+	qh->ep_is_in = ep_is_in;
+
+	qh->data_toggle = DWC2_HC_PID_DATA0;
+	qh->maxp = maxp;
+	qh->maxp_mult = maxp_mult;
+	INIT_LIST_HEAD(&qh->qtd_list);
+	INIT_LIST_HEAD(&qh->qh_list_entry);
+
+	qh->do_split = do_split;
+	qh->dev_speed = dev_speed;
+
+	if (ep_is_int || ep_is_isoc) {
+		/* Compute scheduling parameters once and save them */
+		int host_speed = do_split ? USB_SPEED_HIGH : dev_speed;
+		struct dwc2_tt *dwc_tt = dwc2_host_get_tt_info(hsotg, urb->priv,
+							       mem_flags,
+							       &qh->ttport);
+		int device_ns;
+
+		qh->dwc_tt = dwc_tt;
+
+		qh->host_us = NS_TO_US(usb_calc_bus_time(host_speed, ep_is_in,
+				       ep_is_isoc, bytecount));
+		device_ns = usb_calc_bus_time(dev_speed, ep_is_in,
+					      ep_is_isoc, bytecount);
+
+		if (do_split && dwc_tt)
+			device_ns += dwc_tt->usb_tt->think_time;
+		qh->device_us = NS_TO_US(device_ns);
+
+		qh->device_interval = urb->interval;
+		qh->host_interval = urb->interval * (do_split ? 8 : 1);
+
+		/*
+		 * Schedule low speed if we're running the host in low or
+		 * full speed OR if we've got a "TT" to deal with to access this
+		 * device.
+		 */
+		qh->schedule_low_speed = prtspd != HPRT0_SPD_HIGH_SPEED ||
+					 dwc_tt;
+
+		if (do_split) {
+			/* We won't know num transfers until we schedule */
+			qh->num_hs_transfers = -1;
+		} else if (dev_speed == USB_SPEED_HIGH) {
+			qh->num_hs_transfers = 1;
+		} else {
+			qh->num_hs_transfers = 0;
+		}
+
+		/* We'll schedule later when we have something to do */
+	}
+
+	switch (dev_speed) {
+	case USB_SPEED_LOW:
+		speed = "low";
+		break;
+	case USB_SPEED_FULL:
+		speed = "full";
+		break;
+	case USB_SPEED_HIGH:
+		speed = "high";
+		break;
+	default:
+		speed = "?";
+		break;
+	}
+
+	switch (qh->ep_type) {
+	case USB_ENDPOINT_XFER_ISOC:
+		type = "isochronous";
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		type = "interrupt";
+		break;
+	case USB_ENDPOINT_XFER_CONTROL:
+		type = "control";
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		type = "bulk";
+		break;
+	default:
+		type = "?";
+		break;
+	}
+
+	dwc2_sch_dbg(hsotg, "QH=%p Init %s, %s speed, %d bytes:\n", qh, type,
+		     speed, bytecount);
+	dwc2_sch_dbg(hsotg, "QH=%p ...addr=%d, ep=%d, %s\n", qh,
+		     dwc2_hcd_get_dev_addr(&urb->pipe_info),
+		     dwc2_hcd_get_ep_num(&urb->pipe_info),
+		     ep_is_in ? "IN" : "OUT");
+	if (ep_is_int || ep_is_isoc) {
+		dwc2_sch_dbg(hsotg,
+			     "QH=%p ...duration: host=%d us, device=%d us\n",
+			     qh, qh->host_us, qh->device_us);
+		dwc2_sch_dbg(hsotg, "QH=%p ...interval: host=%d, device=%d\n",
+			     qh, qh->host_interval, qh->device_interval);
+		if (qh->schedule_low_speed)
+			dwc2_sch_dbg(hsotg, "QH=%p ...low speed schedule=%p\n",
+				     qh, dwc2_get_ls_map(hsotg, qh));
+	}
+}
+
+/**
+ * dwc2_hcd_qh_create() - Allocates and initializes a QH
+ *
+ * @hsotg:        The HCD state structure for the DWC OTG controller
+ * @urb:          Holds the information about the device/endpoint needed
+ *                to initialize the QH
+ * @mem_flags:   Flags for allocating memory.
+ *
+ * Return: Pointer to the newly allocated QH, or NULL on error
+ */
+struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg,
+				   struct dwc2_hcd_urb *urb,
+					  gfp_t mem_flags)
+{
+	struct dwc2_qh *qh;
+
+	if (!urb->priv)
+		return NULL;
+
+	/* Allocate memory */
+	qh = kzalloc(sizeof(*qh), mem_flags);
+	if (!qh)
+		return NULL;
+
+	dwc2_qh_init(hsotg, qh, urb, mem_flags);
+
+	if (hsotg->params.dma_desc_enable &&
+	    dwc2_hcd_qh_init_ddma(hsotg, qh, mem_flags) < 0) {
+		dwc2_hcd_qh_free(hsotg, qh);
+		return NULL;
+	}
+
+	return qh;
+}
+
+/**
+ * dwc2_hcd_qh_free() - Frees the QH
+ *
+ * @hsotg: HCD instance
+ * @qh:    The QH to free
+ *
+ * QH should already be removed from the list. QTD list should already be empty
+ * if called from URB Dequeue.
+ *
+ * Must NOT be called with interrupt disabled or spinlock held
+ */
+void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	/* Make sure any unreserve work is finished. */
+	if (del_timer_sync(&qh->unreserve_timer)) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&hsotg->lock, flags);
+		dwc2_do_unreserve(hsotg, qh);
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+	}
+
+	/*
+	 * We don't have the lock so we can safely wait until the wait timer
+	 * finishes.  Of course, at this point in time we'd better have set
+	 * wait_timer_active to false so if this timer was still pending it
+	 * won't do anything anyway, but we want it to finish before we free
+	 * memory.
+	 */
+	hrtimer_cancel(&qh->wait_timer);
+
+	dwc2_host_put_tt_info(hsotg, qh->dwc_tt);
+
+	if (qh->desc_list)
+		dwc2_hcd_qh_free_ddma(hsotg, qh);
+	else if (hsotg->unaligned_cache && qh->dw_align_buf)
+		kmem_cache_free(hsotg->unaligned_cache, qh->dw_align_buf);
+
+	kfree(qh);
+}
+
+/**
+ * dwc2_hcd_qh_add() - Adds a QH to either the non periodic or periodic
+ * schedule if it is not already in the schedule. If the QH is already in
+ * the schedule, no action is taken.
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh:    The QH to add
+ *
+ * Return: 0 if successful, negative error code otherwise
+ */
+int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	int status;
+	u32 intr_mask;
+	ktime_t delay;
+
+	if (dbg_qh(qh))
+		dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	if (!list_empty(&qh->qh_list_entry))
+		/* QH already in a schedule */
+		return 0;
+
+	/* Add the new QH to the appropriate schedule */
+	if (dwc2_qh_is_non_per(qh)) {
+		/* Schedule right away */
+		qh->start_active_frame = hsotg->frame_number;
+		qh->next_active_frame = qh->start_active_frame;
+
+		if (qh->want_wait) {
+			list_add_tail(&qh->qh_list_entry,
+				      &hsotg->non_periodic_sched_waiting);
+			qh->wait_timer_cancel = false;
+			delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
+			hrtimer_start(&qh->wait_timer, delay, HRTIMER_MODE_REL);
+		} else {
+			list_add_tail(&qh->qh_list_entry,
+				      &hsotg->non_periodic_sched_inactive);
+		}
+		return 0;
+	}
+
+	status = dwc2_schedule_periodic(hsotg, qh);
+	if (status)
+		return status;
+	if (!hsotg->periodic_qh_count) {
+		intr_mask = dwc2_readl(hsotg, GINTMSK);
+		intr_mask |= GINTSTS_SOF;
+		dwc2_writel(hsotg, intr_mask, GINTMSK);
+	}
+	hsotg->periodic_qh_count++;
+
+	return 0;
+}
+
+/**
+ * dwc2_hcd_qh_unlink() - Removes a QH from either the non-periodic or periodic
+ * schedule. Memory is not freed.
+ *
+ * @hsotg: The HCD state structure
+ * @qh:    QH to remove from schedule
+ */
+void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	u32 intr_mask;
+
+	dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	/* If the wait_timer is pending, this will stop it from acting */
+	qh->wait_timer_cancel = true;
+
+	if (list_empty(&qh->qh_list_entry))
+		/* QH is not in a schedule */
+		return;
+
+	if (dwc2_qh_is_non_per(qh)) {
+		if (hsotg->non_periodic_qh_ptr == &qh->qh_list_entry)
+			hsotg->non_periodic_qh_ptr =
+					hsotg->non_periodic_qh_ptr->next;
+		list_del_init(&qh->qh_list_entry);
+		return;
+	}
+
+	dwc2_deschedule_periodic(hsotg, qh);
+	hsotg->periodic_qh_count--;
+	if (!hsotg->periodic_qh_count &&
+	    !hsotg->params.dma_desc_enable) {
+		intr_mask = dwc2_readl(hsotg, GINTMSK);
+		intr_mask &= ~GINTSTS_SOF;
+		dwc2_writel(hsotg, intr_mask, GINTMSK);
+	}
+}
+
+/**
+ * dwc2_next_for_periodic_split() - Set next_active_frame midway thru a split.
+ *
+ * This is called for setting next_active_frame for periodic splits for all but
+ * the first packet of the split.  Confusing?  I thought so...
+ *
+ * Periodic splits are single low/full speed transfers that we end up splitting
+ * up into several high speed transfers.  They always fit into one full (1 ms)
+ * frame but might be split over several microframes (125 us each).  We to put
+ * each of the parts on a very specific high speed frame.
+ *
+ * This function figures out where the next active uFrame needs to be.
+ *
+ * @hsotg:        The HCD state structure
+ * @qh:           QH for the periodic transfer.
+ * @frame_number: The current frame number.
+ *
+ * Return: number missed by (or 0 if we didn't miss).
+ */
+static int dwc2_next_for_periodic_split(struct dwc2_hsotg *hsotg,
+					struct dwc2_qh *qh, u16 frame_number)
+{
+	u16 old_frame = qh->next_active_frame;
+	u16 prev_frame_number = dwc2_frame_num_dec(frame_number, 1);
+	int missed = 0;
+	u16 incr;
+
+	/*
+	 * See dwc2_uframe_schedule_split() for split scheduling.
+	 *
+	 * Basically: increment 1 normally, but 2 right after the start split
+	 * (except for ISOC out).
+	 */
+	if (old_frame == qh->start_active_frame &&
+	    !(qh->ep_type == USB_ENDPOINT_XFER_ISOC && !qh->ep_is_in))
+		incr = 2;
+	else
+		incr = 1;
+
+	qh->next_active_frame = dwc2_frame_num_inc(old_frame, incr);
+
+	/*
+	 * Note that it's OK for frame_number to be 1 frame past
+	 * next_active_frame.  Remember that next_active_frame is supposed to
+	 * be 1 frame _before_ when we want to be scheduled.  If we're 1 frame
+	 * past it just means schedule ASAP.
+	 *
+	 * It's _not_ OK, however, if we're more than one frame past.
+	 */
+	if (dwc2_frame_num_gt(prev_frame_number, qh->next_active_frame)) {
+		/*
+		 * OOPS, we missed.  That's actually pretty bad since
+		 * the hub will be unhappy; try ASAP I guess.
+		 */
+		missed = dwc2_frame_num_dec(prev_frame_number,
+					    qh->next_active_frame);
+		qh->next_active_frame = frame_number;
+	}
+
+	return missed;
+}
+
+/**
+ * dwc2_next_periodic_start() - Set next_active_frame for next transfer start
+ *
+ * This is called for setting next_active_frame for a periodic transfer for
+ * all cases other than midway through a periodic split.  This will also update
+ * start_active_frame.
+ *
+ * Since we _always_ keep start_active_frame as the start of the previous
+ * transfer this is normally pretty easy: we just add our interval to
+ * start_active_frame and we've got our answer.
+ *
+ * The tricks come into play if we miss.  In that case we'll look for the next
+ * slot we can fit into.
+ *
+ * @hsotg:        The HCD state structure
+ * @qh:           QH for the periodic transfer.
+ * @frame_number: The current frame number.
+ *
+ * Return: number missed by (or 0 if we didn't miss).
+ */
+static int dwc2_next_periodic_start(struct dwc2_hsotg *hsotg,
+				    struct dwc2_qh *qh, u16 frame_number)
+{
+	int missed = 0;
+	u16 interval = qh->host_interval;
+	u16 prev_frame_number = dwc2_frame_num_dec(frame_number, 1);
+
+	qh->start_active_frame = dwc2_frame_num_inc(qh->start_active_frame,
+						    interval);
+
+	/*
+	 * The dwc2_frame_num_gt() function used below won't work terribly well
+	 * with if we just incremented by a really large intervals since the
+	 * frame counter only goes to 0x3fff.  It's terribly unlikely that we
+	 * will have missed in this case anyway.  Just go to exit.  If we want
+	 * to try to do better we'll need to keep track of a bigger counter
+	 * somewhere in the driver and handle overflows.
+	 */
+	if (interval >= 0x1000)
+		goto exit;
+
+	/*
+	 * Test for misses, which is when it's too late to schedule.
+	 *
+	 * A few things to note:
+	 * - We compare against prev_frame_number since start_active_frame
+	 *   and next_active_frame are always 1 frame before we want things
+	 *   to be active and we assume we can still get scheduled in the
+	 *   current frame number.
+	 * - It's possible for start_active_frame (now incremented) to be
+	 *   next_active_frame if we got an EO MISS (even_odd miss) which
+	 *   basically means that we detected there wasn't enough time for
+	 *   the last packet and dwc2_hc_set_even_odd_frame() rescheduled us
+	 *   at the last second.  We want to make sure we don't schedule
+	 *   another transfer for the same frame.  My test webcam doesn't seem
+	 *   terribly upset by missing a transfer but really doesn't like when
+	 *   we do two transfers in the same frame.
+	 * - Some misses are expected.  Specifically, in order to work
+	 *   perfectly dwc2 really needs quite spectacular interrupt latency
+	 *   requirements.  It needs to be able to handle its interrupts
+	 *   completely within 125 us of them being asserted. That not only
+	 *   means that the dwc2 interrupt handler needs to be fast but it
+	 *   means that nothing else in the system has to block dwc2 for a long
+	 *   time.  We can help with the dwc2 parts of this, but it's hard to
+	 *   guarantee that a system will have interrupt latency < 125 us, so
+	 *   we have to be robust to some misses.
+	 */
+	if (qh->start_active_frame == qh->next_active_frame ||
+	    dwc2_frame_num_gt(prev_frame_number, qh->start_active_frame)) {
+		u16 ideal_start = qh->start_active_frame;
+		int periods_in_map;
+
+		/*
+		 * Adjust interval as per gcd with map size.
+		 * See pmap_schedule() for more details here.
+		 */
+		if (qh->do_split || qh->dev_speed == USB_SPEED_HIGH)
+			periods_in_map = DWC2_HS_SCHEDULE_UFRAMES;
+		else
+			periods_in_map = DWC2_LS_SCHEDULE_FRAMES;
+		interval = gcd(interval, periods_in_map);
+
+		do {
+			qh->start_active_frame = dwc2_frame_num_inc(
+				qh->start_active_frame, interval);
+		} while (dwc2_frame_num_gt(prev_frame_number,
+					   qh->start_active_frame));
+
+		missed = dwc2_frame_num_dec(qh->start_active_frame,
+					    ideal_start);
+	}
+
+exit:
+	qh->next_active_frame = qh->start_active_frame;
+
+	return missed;
+}
+
+/*
+ * Deactivates a QH. For non-periodic QHs, removes the QH from the active
+ * non-periodic schedule. The QH is added to the inactive non-periodic
+ * schedule if any QTDs are still attached to the QH.
+ *
+ * For periodic QHs, the QH is removed from the periodic queued schedule. If
+ * there are any QTDs still attached to the QH, the QH is added to either the
+ * periodic inactive schedule or the periodic ready schedule and its next
+ * scheduled frame is calculated. The QH is placed in the ready schedule if
+ * the scheduled frame has been reached already. Otherwise it's placed in the
+ * inactive schedule. If there are no QTDs attached to the QH, the QH is
+ * completely removed from the periodic schedule.
+ */
+void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+			    int sched_next_periodic_split)
+{
+	u16 old_frame = qh->next_active_frame;
+	u16 frame_number;
+	int missed;
+
+	if (dbg_qh(qh))
+		dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	if (dwc2_qh_is_non_per(qh)) {
+		dwc2_hcd_qh_unlink(hsotg, qh);
+		if (!list_empty(&qh->qtd_list))
+			/* Add back to inactive/waiting non-periodic schedule */
+			dwc2_hcd_qh_add(hsotg, qh);
+		return;
+	}
+
+	/*
+	 * Use the real frame number rather than the cached value as of the
+	 * last SOF just to get us a little closer to reality.  Note that
+	 * means we don't actually know if we've already handled the SOF
+	 * interrupt for this frame.
+	 */
+	frame_number = dwc2_hcd_get_frame_number(hsotg);
+
+	if (sched_next_periodic_split)
+		missed = dwc2_next_for_periodic_split(hsotg, qh, frame_number);
+	else
+		missed = dwc2_next_periodic_start(hsotg, qh, frame_number);
+
+	dwc2_sch_vdbg(hsotg,
+		      "QH=%p next(%d) fn=%04x, sch=%04x=>%04x (%+d) miss=%d %s\n",
+		     qh, sched_next_periodic_split, frame_number, old_frame,
+		     qh->next_active_frame,
+		     dwc2_frame_num_dec(qh->next_active_frame, old_frame),
+		missed, missed ? "MISS" : "");
+
+	if (list_empty(&qh->qtd_list)) {
+		dwc2_hcd_qh_unlink(hsotg, qh);
+		return;
+	}
+
+	/*
+	 * Remove from periodic_sched_queued and move to
+	 * appropriate queue
+	 *
+	 * Note: we purposely use the frame_number from the "hsotg" structure
+	 * since we know SOF interrupt will handle future frames.
+	 */
+	if (dwc2_frame_num_le(qh->next_active_frame, hsotg->frame_number))
+		list_move_tail(&qh->qh_list_entry,
+			       &hsotg->periodic_sched_ready);
+	else
+		list_move_tail(&qh->qh_list_entry,
+			       &hsotg->periodic_sched_inactive);
+}
+
+/**
+ * dwc2_hcd_qtd_init() - Initializes a QTD structure
+ *
+ * @qtd: The QTD to initialize
+ * @urb: The associated URB
+ */
+void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb)
+{
+	qtd->urb = urb;
+	if (dwc2_hcd_get_pipe_type(&urb->pipe_info) ==
+			USB_ENDPOINT_XFER_CONTROL) {
+		/*
+		 * The only time the QTD data toggle is used is on the data
+		 * phase of control transfers. This phase always starts with
+		 * DATA1.
+		 */
+		qtd->data_toggle = DWC2_HC_PID_DATA1;
+		qtd->control_phase = DWC2_CONTROL_SETUP;
+	}
+
+	/* Start split */
+	qtd->complete_split = 0;
+	qtd->isoc_split_pos = DWC2_HCSPLT_XACTPOS_ALL;
+	qtd->isoc_split_offset = 0;
+	qtd->in_process = 0;
+
+	/* Store the qtd ptr in the urb to reference the QTD */
+	urb->qtd = qtd;
+}
+
+/**
+ * dwc2_hcd_qtd_add() - Adds a QTD to the QTD-list of a QH
+ *			Caller must hold driver lock.
+ *
+ * @hsotg:        The DWC HCD structure
+ * @qtd:          The QTD to add
+ * @qh:           Queue head to add qtd to
+ *
+ * Return: 0 if successful, negative error code otherwise
+ *
+ * If the QH to which the QTD is added is not currently scheduled, it is placed
+ * into the proper schedule based on its EP type.
+ */
+int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
+		     struct dwc2_qh *qh)
+{
+	int retval;
+
+	if (unlikely(!qh)) {
+		dev_err(hsotg->dev, "%s: Invalid QH\n", __func__);
+		retval = -EINVAL;
+		goto fail;
+	}
+
+	retval = dwc2_hcd_qh_add(hsotg, qh);
+	if (retval)
+		goto fail;
+
+	qtd->qh = qh;
+	list_add_tail(&qtd->qtd_list_entry, &qh->qtd_list);
+
+	return 0;
+fail:
+	return retval;
+}
diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h
new file mode 100644
index 000000000..13abdd5f6
--- /dev/null
+++ b/drivers/usb/dwc2/hw.h
@@ -0,0 +1,875 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * hw.h - DesignWare HS OTG Controller hardware definitions
+ *
+ * Copyright 2004-2013 Synopsys, Inc.
+ */
+
+#ifndef __DWC2_HW_H__
+#define __DWC2_HW_H__
+
+#define HSOTG_REG(x)	(x)
+
+#define GOTGCTL				HSOTG_REG(0x000)
+#define GOTGCTL_CHIRPEN			BIT(27)
+#define GOTGCTL_MULT_VALID_BC_MASK	(0x1f << 22)
+#define GOTGCTL_MULT_VALID_BC_SHIFT	22
+#define GOTGCTL_CURMODE_HOST		BIT(21)
+#define GOTGCTL_OTGVER			BIT(20)
+#define GOTGCTL_BSESVLD			BIT(19)
+#define GOTGCTL_ASESVLD			BIT(18)
+#define GOTGCTL_DBNC_SHORT		BIT(17)
+#define GOTGCTL_CONID_B			BIT(16)
+#define GOTGCTL_DBNCE_FLTR_BYPASS	BIT(15)
+#define GOTGCTL_DEVHNPEN		BIT(11)
+#define GOTGCTL_HSTSETHNPEN		BIT(10)
+#define GOTGCTL_HNPREQ			BIT(9)
+#define GOTGCTL_HSTNEGSCS		BIT(8)
+#define GOTGCTL_BVALOVAL		BIT(7)
+#define GOTGCTL_BVALOEN			BIT(6)
+#define GOTGCTL_AVALOVAL		BIT(5)
+#define GOTGCTL_AVALOEN			BIT(4)
+#define GOTGCTL_VBVALOVAL		BIT(3)
+#define GOTGCTL_VBVALOEN		BIT(2)
+#define GOTGCTL_SESREQ			BIT(1)
+#define GOTGCTL_SESREQSCS		BIT(0)
+
+#define GOTGINT				HSOTG_REG(0x004)
+#define GOTGINT_DBNCE_DONE		BIT(19)
+#define GOTGINT_A_DEV_TOUT_CHG		BIT(18)
+#define GOTGINT_HST_NEG_DET		BIT(17)
+#define GOTGINT_HST_NEG_SUC_STS_CHNG	BIT(9)
+#define GOTGINT_SES_REQ_SUC_STS_CHNG	BIT(8)
+#define GOTGINT_SES_END_DET		BIT(2)
+
+#define GAHBCFG				HSOTG_REG(0x008)
+#define GAHBCFG_AHB_SINGLE		BIT(23)
+#define GAHBCFG_NOTI_ALL_DMA_WRIT	BIT(22)
+#define GAHBCFG_REM_MEM_SUPP		BIT(21)
+#define GAHBCFG_P_TXF_EMP_LVL		BIT(8)
+#define GAHBCFG_NP_TXF_EMP_LVL		BIT(7)
+#define GAHBCFG_DMA_EN			BIT(5)
+#define GAHBCFG_HBSTLEN_MASK		(0xf << 1)
+#define GAHBCFG_HBSTLEN_SHIFT		1
+#define GAHBCFG_HBSTLEN_SINGLE		0
+#define GAHBCFG_HBSTLEN_INCR		1
+#define GAHBCFG_HBSTLEN_INCR4		3
+#define GAHBCFG_HBSTLEN_INCR8		5
+#define GAHBCFG_HBSTLEN_INCR16		7
+#define GAHBCFG_GLBL_INTR_EN		BIT(0)
+#define GAHBCFG_CTRL_MASK		(GAHBCFG_P_TXF_EMP_LVL | \
+					 GAHBCFG_NP_TXF_EMP_LVL | \
+					 GAHBCFG_DMA_EN | \
+					 GAHBCFG_GLBL_INTR_EN)
+
+#define GUSBCFG				HSOTG_REG(0x00C)
+#define GUSBCFG_FORCEDEVMODE		BIT(30)
+#define GUSBCFG_FORCEHOSTMODE		BIT(29)
+#define GUSBCFG_TXENDDELAY		BIT(28)
+#define GUSBCFG_ICTRAFFICPULLREMOVE	BIT(27)
+#define GUSBCFG_ICUSBCAP		BIT(26)
+#define GUSBCFG_ULPI_INT_PROT_DIS	BIT(25)
+#define GUSBCFG_INDICATORPASSTHROUGH	BIT(24)
+#define GUSBCFG_INDICATORCOMPLEMENT	BIT(23)
+#define GUSBCFG_TERMSELDLPULSE		BIT(22)
+#define GUSBCFG_ULPI_INT_VBUS_IND	BIT(21)
+#define GUSBCFG_ULPI_EXT_VBUS_DRV	BIT(20)
+#define GUSBCFG_ULPI_CLK_SUSP_M		BIT(19)
+#define GUSBCFG_ULPI_AUTO_RES		BIT(18)
+#define GUSBCFG_ULPI_FS_LS		BIT(17)
+#define GUSBCFG_OTG_UTMI_FS_SEL		BIT(16)
+#define GUSBCFG_PHY_LP_CLK_SEL		BIT(15)
+#define GUSBCFG_USBTRDTIM_MASK		(0xf << 10)
+#define GUSBCFG_USBTRDTIM_SHIFT		10
+#define GUSBCFG_HNPCAP			BIT(9)
+#define GUSBCFG_SRPCAP			BIT(8)
+#define GUSBCFG_DDRSEL			BIT(7)
+#define GUSBCFG_PHYSEL			BIT(6)
+#define GUSBCFG_FSINTF			BIT(5)
+#define GUSBCFG_ULPI_UTMI_SEL		BIT(4)
+#define GUSBCFG_PHYIF16			BIT(3)
+#define GUSBCFG_PHYIF8			(0 << 3)
+#define GUSBCFG_TOUTCAL_MASK		(0x7 << 0)
+#define GUSBCFG_TOUTCAL_SHIFT		0
+#define GUSBCFG_TOUTCAL_LIMIT		0x7
+#define GUSBCFG_TOUTCAL(_x)		((_x) << 0)
+
+#define GRSTCTL				HSOTG_REG(0x010)
+#define GRSTCTL_AHBIDLE			BIT(31)
+#define GRSTCTL_DMAREQ			BIT(30)
+#define GRSTCTL_CSFTRST_DONE		BIT(29)
+#define GRSTCTL_TXFNUM_MASK		(0x1f << 6)
+#define GRSTCTL_TXFNUM_SHIFT		6
+#define GRSTCTL_TXFNUM_LIMIT		0x1f
+#define GRSTCTL_TXFNUM(_x)		((_x) << 6)
+#define GRSTCTL_TXFFLSH			BIT(5)
+#define GRSTCTL_RXFFLSH			BIT(4)
+#define GRSTCTL_IN_TKNQ_FLSH		BIT(3)
+#define GRSTCTL_FRMCNTRRST		BIT(2)
+#define GRSTCTL_HSFTRST			BIT(1)
+#define GRSTCTL_CSFTRST			BIT(0)
+
+#define GINTSTS				HSOTG_REG(0x014)
+#define GINTMSK				HSOTG_REG(0x018)
+#define GINTSTS_WKUPINT			BIT(31)
+#define GINTSTS_SESSREQINT		BIT(30)
+#define GINTSTS_DISCONNINT		BIT(29)
+#define GINTSTS_CONIDSTSCHNG		BIT(28)
+#define GINTSTS_LPMTRANRCVD		BIT(27)
+#define GINTSTS_PTXFEMP			BIT(26)
+#define GINTSTS_HCHINT			BIT(25)
+#define GINTSTS_PRTINT			BIT(24)
+#define GINTSTS_RESETDET		BIT(23)
+#define GINTSTS_FET_SUSP		BIT(22)
+#define GINTSTS_INCOMPL_IP		BIT(21)
+#define GINTSTS_INCOMPL_SOOUT		BIT(21)
+#define GINTSTS_INCOMPL_SOIN		BIT(20)
+#define GINTSTS_OEPINT			BIT(19)
+#define GINTSTS_IEPINT			BIT(18)
+#define GINTSTS_EPMIS			BIT(17)
+#define GINTSTS_RESTOREDONE		BIT(16)
+#define GINTSTS_EOPF			BIT(15)
+#define GINTSTS_ISOUTDROP		BIT(14)
+#define GINTSTS_ENUMDONE		BIT(13)
+#define GINTSTS_USBRST			BIT(12)
+#define GINTSTS_USBSUSP			BIT(11)
+#define GINTSTS_ERLYSUSP		BIT(10)
+#define GINTSTS_I2CINT			BIT(9)
+#define GINTSTS_ULPI_CK_INT		BIT(8)
+#define GINTSTS_GOUTNAKEFF		BIT(7)
+#define GINTSTS_GINNAKEFF		BIT(6)
+#define GINTSTS_NPTXFEMP		BIT(5)
+#define GINTSTS_RXFLVL			BIT(4)
+#define GINTSTS_SOF			BIT(3)
+#define GINTSTS_OTGINT			BIT(2)
+#define GINTSTS_MODEMIS			BIT(1)
+#define GINTSTS_CURMODE_HOST		BIT(0)
+
+#define GRXSTSR				HSOTG_REG(0x01C)
+#define GRXSTSP				HSOTG_REG(0x020)
+#define GRXSTS_FN_MASK			(0x7f << 25)
+#define GRXSTS_FN_SHIFT			25
+#define GRXSTS_PKTSTS_MASK		(0xf << 17)
+#define GRXSTS_PKTSTS_SHIFT		17
+#define GRXSTS_PKTSTS_GLOBALOUTNAK	1
+#define GRXSTS_PKTSTS_OUTRX		2
+#define GRXSTS_PKTSTS_HCHIN		2
+#define GRXSTS_PKTSTS_OUTDONE		3
+#define GRXSTS_PKTSTS_HCHIN_XFER_COMP	3
+#define GRXSTS_PKTSTS_SETUPDONE		4
+#define GRXSTS_PKTSTS_DATATOGGLEERR	5
+#define GRXSTS_PKTSTS_SETUPRX		6
+#define GRXSTS_PKTSTS_HCHHALTED		7
+#define GRXSTS_HCHNUM_MASK		(0xf << 0)
+#define GRXSTS_HCHNUM_SHIFT		0
+#define GRXSTS_DPID_MASK		(0x3 << 15)
+#define GRXSTS_DPID_SHIFT		15
+#define GRXSTS_BYTECNT_MASK		(0x7ff << 4)
+#define GRXSTS_BYTECNT_SHIFT		4
+#define GRXSTS_EPNUM_MASK		(0xf << 0)
+#define GRXSTS_EPNUM_SHIFT		0
+
+#define GRXFSIZ				HSOTG_REG(0x024)
+#define GRXFSIZ_DEPTH_MASK		(0xffff << 0)
+#define GRXFSIZ_DEPTH_SHIFT		0
+
+#define GNPTXFSIZ			HSOTG_REG(0x028)
+/* Use FIFOSIZE_* constants to access this register */
+
+#define GNPTXSTS			HSOTG_REG(0x02C)
+#define GNPTXSTS_NP_TXQ_TOP_MASK		(0x7f << 24)
+#define GNPTXSTS_NP_TXQ_TOP_SHIFT		24
+#define GNPTXSTS_NP_TXQ_SPC_AVAIL_MASK		(0xff << 16)
+#define GNPTXSTS_NP_TXQ_SPC_AVAIL_SHIFT		16
+#define GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(_v)	(((_v) >> 16) & 0xff)
+#define GNPTXSTS_NP_TXF_SPC_AVAIL_MASK		(0xffff << 0)
+#define GNPTXSTS_NP_TXF_SPC_AVAIL_SHIFT		0
+#define GNPTXSTS_NP_TXF_SPC_AVAIL_GET(_v)	(((_v) >> 0) & 0xffff)
+
+#define GI2CCTL				HSOTG_REG(0x0030)
+#define GI2CCTL_BSYDNE			BIT(31)
+#define GI2CCTL_RW			BIT(30)
+#define GI2CCTL_I2CDATSE0		BIT(28)
+#define GI2CCTL_I2CDEVADDR_MASK		(0x3 << 26)
+#define GI2CCTL_I2CDEVADDR_SHIFT	26
+#define GI2CCTL_I2CSUSPCTL		BIT(25)
+#define GI2CCTL_ACK			BIT(24)
+#define GI2CCTL_I2CEN			BIT(23)
+#define GI2CCTL_ADDR_MASK		(0x7f << 16)
+#define GI2CCTL_ADDR_SHIFT		16
+#define GI2CCTL_REGADDR_MASK		(0xff << 8)
+#define GI2CCTL_REGADDR_SHIFT		8
+#define GI2CCTL_RWDATA_MASK		(0xff << 0)
+#define GI2CCTL_RWDATA_SHIFT		0
+
+#define GPVNDCTL			HSOTG_REG(0x0034)
+#define GGPIO				HSOTG_REG(0x0038)
+#define GGPIO_STM32_OTG_GCCFG_PWRDWN	BIT(16)
+#define GGPIO_STM32_OTG_GCCFG_VBDEN	BIT(21)
+#define GGPIO_STM32_OTG_GCCFG_IDEN	BIT(22)
+
+#define GUID				HSOTG_REG(0x003c)
+#define GSNPSID				HSOTG_REG(0x0040)
+#define GHWCFG1				HSOTG_REG(0x0044)
+#define GSNPSID_ID_MASK			GENMASK(31, 16)
+
+#define GHWCFG2				HSOTG_REG(0x0048)
+#define GHWCFG2_OTG_ENABLE_IC_USB		BIT(31)
+#define GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK		(0x1f << 26)
+#define GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT		26
+#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK	(0x3 << 24)
+#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT	24
+#define GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK	(0x3 << 22)
+#define GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT	22
+#define GHWCFG2_MULTI_PROC_INT			BIT(20)
+#define GHWCFG2_DYNAMIC_FIFO			BIT(19)
+#define GHWCFG2_PERIO_EP_SUPPORTED		BIT(18)
+#define GHWCFG2_NUM_HOST_CHAN_MASK		(0xf << 14)
+#define GHWCFG2_NUM_HOST_CHAN_SHIFT		14
+#define GHWCFG2_NUM_DEV_EP_MASK			(0xf << 10)
+#define GHWCFG2_NUM_DEV_EP_SHIFT		10
+#define GHWCFG2_FS_PHY_TYPE_MASK		(0x3 << 8)
+#define GHWCFG2_FS_PHY_TYPE_SHIFT		8
+#define GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED	0
+#define GHWCFG2_FS_PHY_TYPE_DEDICATED		1
+#define GHWCFG2_FS_PHY_TYPE_SHARED_UTMI		2
+#define GHWCFG2_FS_PHY_TYPE_SHARED_ULPI		3
+#define GHWCFG2_HS_PHY_TYPE_MASK		(0x3 << 6)
+#define GHWCFG2_HS_PHY_TYPE_SHIFT		6
+#define GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED	0
+#define GHWCFG2_HS_PHY_TYPE_UTMI		1
+#define GHWCFG2_HS_PHY_TYPE_ULPI		2
+#define GHWCFG2_HS_PHY_TYPE_UTMI_ULPI		3
+#define GHWCFG2_POINT2POINT			BIT(5)
+#define GHWCFG2_ARCHITECTURE_MASK		(0x3 << 3)
+#define GHWCFG2_ARCHITECTURE_SHIFT		3
+#define GHWCFG2_SLAVE_ONLY_ARCH			0
+#define GHWCFG2_EXT_DMA_ARCH			1
+#define GHWCFG2_INT_DMA_ARCH			2
+#define GHWCFG2_OP_MODE_MASK			(0x7 << 0)
+#define GHWCFG2_OP_MODE_SHIFT			0
+#define GHWCFG2_OP_MODE_HNP_SRP_CAPABLE		0
+#define GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE	1
+#define GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE	2
+#define GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE	3
+#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE	4
+#define GHWCFG2_OP_MODE_SRP_CAPABLE_HOST	5
+#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST	6
+#define GHWCFG2_OP_MODE_UNDEFINED		7
+
+#define GHWCFG3				HSOTG_REG(0x004c)
+#define GHWCFG3_DFIFO_DEPTH_MASK		(0xffff << 16)
+#define GHWCFG3_DFIFO_DEPTH_SHIFT		16
+#define GHWCFG3_OTG_LPM_EN			BIT(15)
+#define GHWCFG3_BC_SUPPORT			BIT(14)
+#define GHWCFG3_OTG_ENABLE_HSIC			BIT(13)
+#define GHWCFG3_ADP_SUPP			BIT(12)
+#define GHWCFG3_SYNCH_RESET_TYPE		BIT(11)
+#define GHWCFG3_OPTIONAL_FEATURES		BIT(10)
+#define GHWCFG3_VENDOR_CTRL_IF			BIT(9)
+#define GHWCFG3_I2C				BIT(8)
+#define GHWCFG3_OTG_FUNC			BIT(7)
+#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK	(0x7 << 4)
+#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT	4
+#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK	(0xf << 0)
+#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT	0
+
+#define GHWCFG4				HSOTG_REG(0x0050)
+#define GHWCFG4_DESC_DMA_DYN			BIT(31)
+#define GHWCFG4_DESC_DMA			BIT(30)
+#define GHWCFG4_NUM_IN_EPS_MASK			(0xf << 26)
+#define GHWCFG4_NUM_IN_EPS_SHIFT		26
+#define GHWCFG4_DED_FIFO_EN			BIT(25)
+#define GHWCFG4_DED_FIFO_SHIFT		25
+#define GHWCFG4_SESSION_END_FILT_EN		BIT(24)
+#define GHWCFG4_B_VALID_FILT_EN			BIT(23)
+#define GHWCFG4_A_VALID_FILT_EN			BIT(22)
+#define GHWCFG4_VBUS_VALID_FILT_EN		BIT(21)
+#define GHWCFG4_IDDIG_FILT_EN			BIT(20)
+#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_MASK	(0xf << 16)
+#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_SHIFT	16
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK	(0x3 << 14)
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT	14
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8		0
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_16		1
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16	2
+#define GHWCFG4_ACG_SUPPORTED			BIT(12)
+#define GHWCFG4_IPG_ISOC_SUPPORTED		BIT(11)
+#define GHWCFG4_SERVICE_INTERVAL_SUPPORTED      BIT(10)
+#define GHWCFG4_XHIBER				BIT(7)
+#define GHWCFG4_HIBER				BIT(6)
+#define GHWCFG4_MIN_AHB_FREQ			BIT(5)
+#define GHWCFG4_POWER_OPTIMIZ			BIT(4)
+#define GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK	(0xf << 0)
+#define GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT	0
+
+#define GLPMCFG				HSOTG_REG(0x0054)
+#define GLPMCFG_INVSELHSIC		BIT(31)
+#define GLPMCFG_HSICCON			BIT(30)
+#define GLPMCFG_RSTRSLPSTS		BIT(29)
+#define GLPMCFG_ENBESL			BIT(28)
+#define GLPMCFG_LPM_RETRYCNT_STS_MASK	(0x7 << 25)
+#define GLPMCFG_LPM_RETRYCNT_STS_SHIFT	25
+#define GLPMCFG_SNDLPM			BIT(24)
+#define GLPMCFG_RETRY_CNT_MASK		(0x7 << 21)
+#define GLPMCFG_RETRY_CNT_SHIFT		21
+#define GLPMCFG_LPM_REJECT_CTRL_CONTROL	BIT(21)
+#define GLPMCFG_LPM_ACCEPT_CTRL_ISOC	BIT(22)
+#define GLPMCFG_LPM_CHNL_INDX_MASK	(0xf << 17)
+#define GLPMCFG_LPM_CHNL_INDX_SHIFT	17
+#define GLPMCFG_L1RESUMEOK		BIT(16)
+#define GLPMCFG_SLPSTS			BIT(15)
+#define GLPMCFG_COREL1RES_MASK		(0x3 << 13)
+#define GLPMCFG_COREL1RES_SHIFT		13
+#define GLPMCFG_HIRD_THRES_MASK		(0x1f << 8)
+#define GLPMCFG_HIRD_THRES_SHIFT	8
+#define GLPMCFG_HIRD_THRES_EN		(0x10 << 8)
+#define GLPMCFG_ENBLSLPM		BIT(7)
+#define GLPMCFG_BREMOTEWAKE		BIT(6)
+#define GLPMCFG_HIRD_MASK		(0xf << 2)
+#define GLPMCFG_HIRD_SHIFT		2
+#define GLPMCFG_APPL1RES		BIT(1)
+#define GLPMCFG_LPMCAP			BIT(0)
+
+#define GPWRDN				HSOTG_REG(0x0058)
+#define GPWRDN_MULT_VAL_ID_BC_MASK	(0x1f << 24)
+#define GPWRDN_MULT_VAL_ID_BC_SHIFT	24
+#define GPWRDN_ADP_INT			BIT(23)
+#define GPWRDN_BSESSVLD			BIT(22)
+#define GPWRDN_IDSTS			BIT(21)
+#define GPWRDN_LINESTATE_MASK		(0x3 << 19)
+#define GPWRDN_LINESTATE_SHIFT		19
+#define GPWRDN_STS_CHGINT_MSK		BIT(18)
+#define GPWRDN_STS_CHGINT		BIT(17)
+#define GPWRDN_SRP_DET_MSK		BIT(16)
+#define GPWRDN_SRP_DET			BIT(15)
+#define GPWRDN_CONNECT_DET_MSK		BIT(14)
+#define GPWRDN_CONNECT_DET		BIT(13)
+#define GPWRDN_DISCONN_DET_MSK		BIT(12)
+#define GPWRDN_DISCONN_DET		BIT(11)
+#define GPWRDN_RST_DET_MSK		BIT(10)
+#define GPWRDN_RST_DET			BIT(9)
+#define GPWRDN_LNSTSCHG_MSK		BIT(8)
+#define GPWRDN_LNSTSCHG			BIT(7)
+#define GPWRDN_DIS_VBUS			BIT(6)
+#define GPWRDN_PWRDNSWTCH		BIT(5)
+#define GPWRDN_PWRDNRSTN		BIT(4)
+#define GPWRDN_PWRDNCLMP		BIT(3)
+#define GPWRDN_RESTORE			BIT(2)
+#define GPWRDN_PMUACTV			BIT(1)
+#define GPWRDN_PMUINTSEL		BIT(0)
+
+#define GDFIFOCFG			HSOTG_REG(0x005c)
+#define GDFIFOCFG_EPINFOBASE_MASK	(0xffff << 16)
+#define GDFIFOCFG_EPINFOBASE_SHIFT	16
+#define GDFIFOCFG_GDFIFOCFG_MASK	(0xffff << 0)
+#define GDFIFOCFG_GDFIFOCFG_SHIFT	0
+
+#define ADPCTL				HSOTG_REG(0x0060)
+#define ADPCTL_AR_MASK			(0x3 << 27)
+#define ADPCTL_AR_SHIFT			27
+#define ADPCTL_ADP_TMOUT_INT_MSK	BIT(26)
+#define ADPCTL_ADP_SNS_INT_MSK		BIT(25)
+#define ADPCTL_ADP_PRB_INT_MSK		BIT(24)
+#define ADPCTL_ADP_TMOUT_INT		BIT(23)
+#define ADPCTL_ADP_SNS_INT		BIT(22)
+#define ADPCTL_ADP_PRB_INT		BIT(21)
+#define ADPCTL_ADPENA			BIT(20)
+#define ADPCTL_ADPRES			BIT(19)
+#define ADPCTL_ENASNS			BIT(18)
+#define ADPCTL_ENAPRB			BIT(17)
+#define ADPCTL_RTIM_MASK		(0x7ff << 6)
+#define ADPCTL_RTIM_SHIFT		6
+#define ADPCTL_PRB_PER_MASK		(0x3 << 4)
+#define ADPCTL_PRB_PER_SHIFT		4
+#define ADPCTL_PRB_DELTA_MASK		(0x3 << 2)
+#define ADPCTL_PRB_DELTA_SHIFT		2
+#define ADPCTL_PRB_DSCHRG_MASK		(0x3 << 0)
+#define ADPCTL_PRB_DSCHRG_SHIFT		0
+
+#define GREFCLK				    HSOTG_REG(0x0064)
+#define GREFCLK_REFCLKPER_MASK		    (0x1ffff << 15)
+#define GREFCLK_REFCLKPER_SHIFT		    15
+#define GREFCLK_REF_CLK_MODE		    BIT(14)
+#define GREFCLK_SOF_CNT_WKUP_ALERT_MASK	    (0x3ff)
+#define GREFCLK_SOF_CNT_WKUP_ALERT_SHIFT    0
+
+#define GINTMSK2			HSOTG_REG(0x0068)
+#define GINTMSK2_WKUP_ALERT_INT_MSK	BIT(0)
+
+#define GINTSTS2			HSOTG_REG(0x006c)
+#define GINTSTS2_WKUP_ALERT_INT		BIT(0)
+
+#define HPTXFSIZ			HSOTG_REG(0x100)
+/* Use FIFOSIZE_* constants to access this register */
+
+#define DPTXFSIZN(_a)			HSOTG_REG(0x104 + (((_a) - 1) * 4))
+/* Use FIFOSIZE_* constants to access this register */
+
+/* These apply to the GNPTXFSIZ, HPTXFSIZ and DPTXFSIZN registers */
+#define FIFOSIZE_DEPTH_MASK		(0xffff << 16)
+#define FIFOSIZE_DEPTH_SHIFT		16
+#define FIFOSIZE_STARTADDR_MASK		(0xffff << 0)
+#define FIFOSIZE_STARTADDR_SHIFT	0
+#define FIFOSIZE_DEPTH_GET(_x)		(((_x) >> 16) & 0xffff)
+
+/* Device mode registers */
+
+#define DCFG				HSOTG_REG(0x800)
+#define DCFG_DESCDMA_EN			BIT(23)
+#define DCFG_EPMISCNT_MASK		(0x1f << 18)
+#define DCFG_EPMISCNT_SHIFT		18
+#define DCFG_EPMISCNT_LIMIT		0x1f
+#define DCFG_EPMISCNT(_x)		((_x) << 18)
+#define DCFG_IPG_ISOC_SUPPORDED		BIT(17)
+#define DCFG_PERFRINT_MASK		(0x3 << 11)
+#define DCFG_PERFRINT_SHIFT		11
+#define DCFG_PERFRINT_LIMIT		0x3
+#define DCFG_PERFRINT(_x)		((_x) << 11)
+#define DCFG_DEVADDR_MASK		(0x7f << 4)
+#define DCFG_DEVADDR_SHIFT		4
+#define DCFG_DEVADDR_LIMIT		0x7f
+#define DCFG_DEVADDR(_x)		((_x) << 4)
+#define DCFG_NZ_STS_OUT_HSHK		BIT(2)
+#define DCFG_DEVSPD_MASK		(0x3 << 0)
+#define DCFG_DEVSPD_SHIFT		0
+#define DCFG_DEVSPD_HS			0
+#define DCFG_DEVSPD_FS			1
+#define DCFG_DEVSPD_LS			2
+#define DCFG_DEVSPD_FS48		3
+
+#define DCTL				HSOTG_REG(0x804)
+#define DCTL_SERVICE_INTERVAL_SUPPORTED BIT(19)
+#define DCTL_PWRONPRGDONE		BIT(11)
+#define DCTL_CGOUTNAK			BIT(10)
+#define DCTL_SGOUTNAK			BIT(9)
+#define DCTL_CGNPINNAK			BIT(8)
+#define DCTL_SGNPINNAK			BIT(7)
+#define DCTL_TSTCTL_MASK		(0x7 << 4)
+#define DCTL_TSTCTL_SHIFT		4
+#define DCTL_GOUTNAKSTS			BIT(3)
+#define DCTL_GNPINNAKSTS		BIT(2)
+#define DCTL_SFTDISCON			BIT(1)
+#define DCTL_RMTWKUPSIG			BIT(0)
+
+#define DSTS				HSOTG_REG(0x808)
+#define DSTS_SOFFN_MASK			(0x3fff << 8)
+#define DSTS_SOFFN_SHIFT		8
+#define DSTS_SOFFN_LIMIT		0x3fff
+#define DSTS_SOFFN(_x)			((_x) << 8)
+#define DSTS_ERRATICERR			BIT(3)
+#define DSTS_ENUMSPD_MASK		(0x3 << 1)
+#define DSTS_ENUMSPD_SHIFT		1
+#define DSTS_ENUMSPD_HS			0
+#define DSTS_ENUMSPD_FS			1
+#define DSTS_ENUMSPD_LS			2
+#define DSTS_ENUMSPD_FS48		3
+#define DSTS_SUSPSTS			BIT(0)
+
+#define DIEPMSK				HSOTG_REG(0x810)
+#define DIEPMSK_NAKMSK			BIT(13)
+#define DIEPMSK_BNAININTRMSK		BIT(9)
+#define DIEPMSK_TXFIFOUNDRNMSK		BIT(8)
+#define DIEPMSK_TXFIFOEMPTY		BIT(7)
+#define DIEPMSK_INEPNAKEFFMSK		BIT(6)
+#define DIEPMSK_INTKNEPMISMSK		BIT(5)
+#define DIEPMSK_INTKNTXFEMPMSK		BIT(4)
+#define DIEPMSK_TIMEOUTMSK		BIT(3)
+#define DIEPMSK_AHBERRMSK		BIT(2)
+#define DIEPMSK_EPDISBLDMSK		BIT(1)
+#define DIEPMSK_XFERCOMPLMSK		BIT(0)
+
+#define DOEPMSK				HSOTG_REG(0x814)
+#define DOEPMSK_BNAMSK			BIT(9)
+#define DOEPMSK_BACK2BACKSETUP		BIT(6)
+#define DOEPMSK_STSPHSERCVDMSK		BIT(5)
+#define DOEPMSK_OUTTKNEPDISMSK		BIT(4)
+#define DOEPMSK_SETUPMSK		BIT(3)
+#define DOEPMSK_AHBERRMSK		BIT(2)
+#define DOEPMSK_EPDISBLDMSK		BIT(1)
+#define DOEPMSK_XFERCOMPLMSK		BIT(0)
+
+#define DAINT				HSOTG_REG(0x818)
+#define DAINTMSK			HSOTG_REG(0x81C)
+#define DAINT_OUTEP_SHIFT		16
+#define DAINT_OUTEP(_x)			(1 << ((_x) + 16))
+#define DAINT_INEP(_x)			(1 << (_x))
+
+#define DTKNQR1				HSOTG_REG(0x820)
+#define DTKNQR2				HSOTG_REG(0x824)
+#define DTKNQR3				HSOTG_REG(0x830)
+#define DTKNQR4				HSOTG_REG(0x834)
+#define DIEPEMPMSK			HSOTG_REG(0x834)
+
+#define DVBUSDIS			HSOTG_REG(0x828)
+#define DVBUSPULSE			HSOTG_REG(0x82C)
+
+#define DIEPCTL0			HSOTG_REG(0x900)
+#define DIEPCTL(_a)			HSOTG_REG(0x900 + ((_a) * 0x20))
+
+#define DOEPCTL0			HSOTG_REG(0xB00)
+#define DOEPCTL(_a)			HSOTG_REG(0xB00 + ((_a) * 0x20))
+
+/* EP0 specialness:
+ * bits[29..28] - reserved (no SetD0PID, SetD1PID)
+ * bits[25..22] - should always be zero, this isn't a periodic endpoint
+ * bits[10..0]  - MPS setting different for EP0
+ */
+#define D0EPCTL_MPS_MASK		(0x3 << 0)
+#define D0EPCTL_MPS_SHIFT		0
+#define D0EPCTL_MPS_64			0
+#define D0EPCTL_MPS_32			1
+#define D0EPCTL_MPS_16			2
+#define D0EPCTL_MPS_8			3
+
+#define DXEPCTL_EPENA			BIT(31)
+#define DXEPCTL_EPDIS			BIT(30)
+#define DXEPCTL_SETD1PID		BIT(29)
+#define DXEPCTL_SETODDFR		BIT(29)
+#define DXEPCTL_SETD0PID		BIT(28)
+#define DXEPCTL_SETEVENFR		BIT(28)
+#define DXEPCTL_SNAK			BIT(27)
+#define DXEPCTL_CNAK			BIT(26)
+#define DXEPCTL_TXFNUM_MASK		(0xf << 22)
+#define DXEPCTL_TXFNUM_SHIFT		22
+#define DXEPCTL_TXFNUM_LIMIT		0xf
+#define DXEPCTL_TXFNUM(_x)		((_x) << 22)
+#define DXEPCTL_STALL			BIT(21)
+#define DXEPCTL_SNP			BIT(20)
+#define DXEPCTL_EPTYPE_MASK		(0x3 << 18)
+#define DXEPCTL_EPTYPE_CONTROL		(0x0 << 18)
+#define DXEPCTL_EPTYPE_ISO		(0x1 << 18)
+#define DXEPCTL_EPTYPE_BULK		(0x2 << 18)
+#define DXEPCTL_EPTYPE_INTERRUPT	(0x3 << 18)
+
+#define DXEPCTL_NAKSTS			BIT(17)
+#define DXEPCTL_DPID			BIT(16)
+#define DXEPCTL_EOFRNUM			BIT(16)
+#define DXEPCTL_USBACTEP		BIT(15)
+#define DXEPCTL_NEXTEP_MASK		(0xf << 11)
+#define DXEPCTL_NEXTEP_SHIFT		11
+#define DXEPCTL_NEXTEP_LIMIT		0xf
+#define DXEPCTL_NEXTEP(_x)		((_x) << 11)
+#define DXEPCTL_MPS_MASK		(0x7ff << 0)
+#define DXEPCTL_MPS_SHIFT		0
+#define DXEPCTL_MPS_LIMIT		0x7ff
+#define DXEPCTL_MPS(_x)			((_x) << 0)
+
+#define DIEPINT(_a)			HSOTG_REG(0x908 + ((_a) * 0x20))
+#define DOEPINT(_a)			HSOTG_REG(0xB08 + ((_a) * 0x20))
+#define DXEPINT_SETUP_RCVD		BIT(15)
+#define DXEPINT_NYETINTRPT		BIT(14)
+#define DXEPINT_NAKINTRPT		BIT(13)
+#define DXEPINT_BBLEERRINTRPT		BIT(12)
+#define DXEPINT_PKTDRPSTS		BIT(11)
+#define DXEPINT_BNAINTR			BIT(9)
+#define DXEPINT_TXFIFOUNDRN		BIT(8)
+#define DXEPINT_OUTPKTERR		BIT(8)
+#define DXEPINT_TXFEMP			BIT(7)
+#define DXEPINT_INEPNAKEFF		BIT(6)
+#define DXEPINT_BACK2BACKSETUP		BIT(6)
+#define DXEPINT_INTKNEPMIS		BIT(5)
+#define DXEPINT_STSPHSERCVD		BIT(5)
+#define DXEPINT_INTKNTXFEMP		BIT(4)
+#define DXEPINT_OUTTKNEPDIS		BIT(4)
+#define DXEPINT_TIMEOUT			BIT(3)
+#define DXEPINT_SETUP			BIT(3)
+#define DXEPINT_AHBERR			BIT(2)
+#define DXEPINT_EPDISBLD		BIT(1)
+#define DXEPINT_XFERCOMPL		BIT(0)
+
+#define DIEPTSIZ0			HSOTG_REG(0x910)
+#define DIEPTSIZ0_PKTCNT_MASK		(0x3 << 19)
+#define DIEPTSIZ0_PKTCNT_SHIFT		19
+#define DIEPTSIZ0_PKTCNT_LIMIT		0x3
+#define DIEPTSIZ0_PKTCNT(_x)		((_x) << 19)
+#define DIEPTSIZ0_XFERSIZE_MASK		(0x7f << 0)
+#define DIEPTSIZ0_XFERSIZE_SHIFT	0
+#define DIEPTSIZ0_XFERSIZE_LIMIT	0x7f
+#define DIEPTSIZ0_XFERSIZE(_x)		((_x) << 0)
+
+#define DOEPTSIZ0			HSOTG_REG(0xB10)
+#define DOEPTSIZ0_SUPCNT_MASK		(0x3 << 29)
+#define DOEPTSIZ0_SUPCNT_SHIFT		29
+#define DOEPTSIZ0_SUPCNT_LIMIT		0x3
+#define DOEPTSIZ0_SUPCNT(_x)		((_x) << 29)
+#define DOEPTSIZ0_PKTCNT		BIT(19)
+#define DOEPTSIZ0_XFERSIZE_MASK		(0x7f << 0)
+#define DOEPTSIZ0_XFERSIZE_SHIFT	0
+
+#define DIEPTSIZ(_a)			HSOTG_REG(0x910 + ((_a) * 0x20))
+#define DOEPTSIZ(_a)			HSOTG_REG(0xB10 + ((_a) * 0x20))
+#define DXEPTSIZ_MC_MASK		(0x3 << 29)
+#define DXEPTSIZ_MC_SHIFT		29
+#define DXEPTSIZ_MC_LIMIT		0x3
+#define DXEPTSIZ_MC(_x)			((_x) << 29)
+#define DXEPTSIZ_PKTCNT_MASK		(0x3ff << 19)
+#define DXEPTSIZ_PKTCNT_SHIFT		19
+#define DXEPTSIZ_PKTCNT_LIMIT		0x3ff
+#define DXEPTSIZ_PKTCNT_GET(_v)		(((_v) >> 19) & 0x3ff)
+#define DXEPTSIZ_PKTCNT(_x)		((_x) << 19)
+#define DXEPTSIZ_XFERSIZE_MASK		(0x7ffff << 0)
+#define DXEPTSIZ_XFERSIZE_SHIFT		0
+#define DXEPTSIZ_XFERSIZE_LIMIT		0x7ffff
+#define DXEPTSIZ_XFERSIZE_GET(_v)	(((_v) >> 0) & 0x7ffff)
+#define DXEPTSIZ_XFERSIZE(_x)		((_x) << 0)
+
+#define DIEPDMA(_a)			HSOTG_REG(0x914 + ((_a) * 0x20))
+#define DOEPDMA(_a)			HSOTG_REG(0xB14 + ((_a) * 0x20))
+
+#define DTXFSTS(_a)			HSOTG_REG(0x918 + ((_a) * 0x20))
+
+#define PCGCTL				HSOTG_REG(0x0e00)
+#define PCGCTL_IF_DEV_MODE		BIT(31)
+#define PCGCTL_P2HD_PRT_SPD_MASK	(0x3 << 29)
+#define PCGCTL_P2HD_PRT_SPD_SHIFT	29
+#define PCGCTL_P2HD_DEV_ENUM_SPD_MASK	(0x3 << 27)
+#define PCGCTL_P2HD_DEV_ENUM_SPD_SHIFT	27
+#define PCGCTL_MAC_DEV_ADDR_MASK	(0x7f << 20)
+#define PCGCTL_MAC_DEV_ADDR_SHIFT	20
+#define PCGCTL_MAX_TERMSEL		BIT(19)
+#define PCGCTL_MAX_XCVRSELECT_MASK	(0x3 << 17)
+#define PCGCTL_MAX_XCVRSELECT_SHIFT	17
+#define PCGCTL_PORT_POWER		BIT(16)
+#define PCGCTL_PRT_CLK_SEL_MASK		(0x3 << 14)
+#define PCGCTL_PRT_CLK_SEL_SHIFT	14
+#define PCGCTL_ESS_REG_RESTORED		BIT(13)
+#define PCGCTL_EXTND_HIBER_SWITCH	BIT(12)
+#define PCGCTL_EXTND_HIBER_PWRCLMP	BIT(11)
+#define PCGCTL_ENBL_EXTND_HIBER		BIT(10)
+#define PCGCTL_RESTOREMODE		BIT(9)
+#define PCGCTL_RESETAFTSUSP		BIT(8)
+#define PCGCTL_DEEP_SLEEP		BIT(7)
+#define PCGCTL_PHY_IN_SLEEP		BIT(6)
+#define PCGCTL_ENBL_SLEEP_GATING	BIT(5)
+#define PCGCTL_RSTPDWNMODULE		BIT(3)
+#define PCGCTL_PWRCLMP			BIT(2)
+#define PCGCTL_GATEHCLK			BIT(1)
+#define PCGCTL_STOPPCLK			BIT(0)
+
+#define PCGCCTL1                        HSOTG_REG(0xe04)
+#define PCGCCTL1_TIMER                  (0x3 << 1)
+#define PCGCCTL1_GATEEN                 BIT(0)
+
+#define EPFIFO(_a)			HSOTG_REG(0x1000 + ((_a) * 0x1000))
+
+/* Host Mode Registers */
+
+#define HCFG				HSOTG_REG(0x0400)
+#define HCFG_MODECHTIMEN		BIT(31)
+#define HCFG_PERSCHEDENA		BIT(26)
+#define HCFG_FRLISTEN_MASK		(0x3 << 24)
+#define HCFG_FRLISTEN_SHIFT		24
+#define HCFG_FRLISTEN_8				(0 << 24)
+#define FRLISTEN_8_SIZE				8
+#define HCFG_FRLISTEN_16			BIT(24)
+#define FRLISTEN_16_SIZE			16
+#define HCFG_FRLISTEN_32			(2 << 24)
+#define FRLISTEN_32_SIZE			32
+#define HCFG_FRLISTEN_64			(3 << 24)
+#define FRLISTEN_64_SIZE			64
+#define HCFG_DESCDMA			BIT(23)
+#define HCFG_RESVALID_MASK		(0xff << 8)
+#define HCFG_RESVALID_SHIFT		8
+#define HCFG_ENA32KHZ			BIT(7)
+#define HCFG_FSLSSUPP			BIT(2)
+#define HCFG_FSLSPCLKSEL_MASK		(0x3 << 0)
+#define HCFG_FSLSPCLKSEL_SHIFT		0
+#define HCFG_FSLSPCLKSEL_30_60_MHZ	0
+#define HCFG_FSLSPCLKSEL_48_MHZ		1
+#define HCFG_FSLSPCLKSEL_6_MHZ		2
+
+#define HFIR				HSOTG_REG(0x0404)
+#define HFIR_FRINT_MASK			(0xffff << 0)
+#define HFIR_FRINT_SHIFT		0
+#define HFIR_RLDCTRL			BIT(16)
+
+#define HFNUM				HSOTG_REG(0x0408)
+#define HFNUM_FRREM_MASK		(0xffff << 16)
+#define HFNUM_FRREM_SHIFT		16
+#define HFNUM_FRNUM_MASK		(0xffff << 0)
+#define HFNUM_FRNUM_SHIFT		0
+#define HFNUM_MAX_FRNUM			0x3fff
+
+#define HPTXSTS				HSOTG_REG(0x0410)
+#define TXSTS_QTOP_ODD			BIT(31)
+#define TXSTS_QTOP_CHNEP_MASK		(0xf << 27)
+#define TXSTS_QTOP_CHNEP_SHIFT		27
+#define TXSTS_QTOP_TOKEN_MASK		(0x3 << 25)
+#define TXSTS_QTOP_TOKEN_SHIFT		25
+#define TXSTS_QTOP_TERMINATE		BIT(24)
+#define TXSTS_QSPCAVAIL_MASK		(0xff << 16)
+#define TXSTS_QSPCAVAIL_SHIFT		16
+#define TXSTS_FSPCAVAIL_MASK		(0xffff << 0)
+#define TXSTS_FSPCAVAIL_SHIFT		0
+
+#define HAINT				HSOTG_REG(0x0414)
+#define HAINTMSK			HSOTG_REG(0x0418)
+#define HFLBADDR			HSOTG_REG(0x041c)
+
+#define HPRT0				HSOTG_REG(0x0440)
+#define HPRT0_SPD_MASK			(0x3 << 17)
+#define HPRT0_SPD_SHIFT			17
+#define HPRT0_SPD_HIGH_SPEED		0
+#define HPRT0_SPD_FULL_SPEED		1
+#define HPRT0_SPD_LOW_SPEED		2
+#define HPRT0_TSTCTL_MASK		(0xf << 13)
+#define HPRT0_TSTCTL_SHIFT		13
+#define HPRT0_PWR			BIT(12)
+#define HPRT0_LNSTS_MASK		(0x3 << 10)
+#define HPRT0_LNSTS_SHIFT		10
+#define HPRT0_RST			BIT(8)
+#define HPRT0_SUSP			BIT(7)
+#define HPRT0_RES			BIT(6)
+#define HPRT0_OVRCURRCHG		BIT(5)
+#define HPRT0_OVRCURRACT		BIT(4)
+#define HPRT0_ENACHG			BIT(3)
+#define HPRT0_ENA			BIT(2)
+#define HPRT0_CONNDET			BIT(1)
+#define HPRT0_CONNSTS			BIT(0)
+
+#define HCCHAR(_ch)			HSOTG_REG(0x0500 + 0x20 * (_ch))
+#define HCCHAR_CHENA			BIT(31)
+#define HCCHAR_CHDIS			BIT(30)
+#define HCCHAR_ODDFRM			BIT(29)
+#define HCCHAR_DEVADDR_MASK		(0x7f << 22)
+#define HCCHAR_DEVADDR_SHIFT		22
+#define HCCHAR_MULTICNT_MASK		(0x3 << 20)
+#define HCCHAR_MULTICNT_SHIFT		20
+#define HCCHAR_EPTYPE_MASK		(0x3 << 18)
+#define HCCHAR_EPTYPE_SHIFT		18
+#define HCCHAR_LSPDDEV			BIT(17)
+#define HCCHAR_EPDIR			BIT(15)
+#define HCCHAR_EPNUM_MASK		(0xf << 11)
+#define HCCHAR_EPNUM_SHIFT		11
+#define HCCHAR_MPS_MASK			(0x7ff << 0)
+#define HCCHAR_MPS_SHIFT		0
+
+#define HCSPLT(_ch)			HSOTG_REG(0x0504 + 0x20 * (_ch))
+#define HCSPLT_SPLTENA			BIT(31)
+#define HCSPLT_COMPSPLT			BIT(16)
+#define HCSPLT_XACTPOS_MASK		(0x3 << 14)
+#define HCSPLT_XACTPOS_SHIFT		14
+#define HCSPLT_XACTPOS_MID		0
+#define HCSPLT_XACTPOS_END		1
+#define HCSPLT_XACTPOS_BEGIN		2
+#define HCSPLT_XACTPOS_ALL		3
+#define HCSPLT_HUBADDR_MASK		(0x7f << 7)
+#define HCSPLT_HUBADDR_SHIFT		7
+#define HCSPLT_PRTADDR_MASK		(0x7f << 0)
+#define HCSPLT_PRTADDR_SHIFT		0
+
+#define HCINT(_ch)			HSOTG_REG(0x0508 + 0x20 * (_ch))
+#define HCINTMSK(_ch)			HSOTG_REG(0x050c + 0x20 * (_ch))
+#define HCINTMSK_RESERVED14_31		(0x3ffff << 14)
+#define HCINTMSK_FRM_LIST_ROLL		BIT(13)
+#define HCINTMSK_XCS_XACT		BIT(12)
+#define HCINTMSK_BNA			BIT(11)
+#define HCINTMSK_DATATGLERR		BIT(10)
+#define HCINTMSK_FRMOVRUN		BIT(9)
+#define HCINTMSK_BBLERR			BIT(8)
+#define HCINTMSK_XACTERR		BIT(7)
+#define HCINTMSK_NYET			BIT(6)
+#define HCINTMSK_ACK			BIT(5)
+#define HCINTMSK_NAK			BIT(4)
+#define HCINTMSK_STALL			BIT(3)
+#define HCINTMSK_AHBERR			BIT(2)
+#define HCINTMSK_CHHLTD			BIT(1)
+#define HCINTMSK_XFERCOMPL		BIT(0)
+
+#define HCTSIZ(_ch)			HSOTG_REG(0x0510 + 0x20 * (_ch))
+#define TSIZ_DOPNG			BIT(31)
+#define TSIZ_SC_MC_PID_MASK		(0x3 << 29)
+#define TSIZ_SC_MC_PID_SHIFT		29
+#define TSIZ_SC_MC_PID_DATA0		0
+#define TSIZ_SC_MC_PID_DATA2		1
+#define TSIZ_SC_MC_PID_DATA1		2
+#define TSIZ_SC_MC_PID_MDATA		3
+#define TSIZ_SC_MC_PID_SETUP		3
+#define TSIZ_PKTCNT_MASK		(0x3ff << 19)
+#define TSIZ_PKTCNT_SHIFT		19
+#define TSIZ_NTD_MASK			(0xff << 8)
+#define TSIZ_NTD_SHIFT			8
+#define TSIZ_SCHINFO_MASK		(0xff << 0)
+#define TSIZ_SCHINFO_SHIFT		0
+#define TSIZ_XFERSIZE_MASK		(0x7ffff << 0)
+#define TSIZ_XFERSIZE_SHIFT		0
+
+#define HCDMA(_ch)			HSOTG_REG(0x0514 + 0x20 * (_ch))
+
+#define HCDMAB(_ch)			HSOTG_REG(0x051c + 0x20 * (_ch))
+
+#define HCFIFO(_ch)			HSOTG_REG(0x1000 + 0x1000 * (_ch))
+
+/**
+ * struct dwc2_dma_desc - DMA descriptor structure,
+ * used for both host and gadget modes
+ *
+ * @status: DMA descriptor status quadlet
+ * @buf:    DMA descriptor data buffer pointer
+ *
+ * DMA Descriptor structure contains two quadlets:
+ * Status quadlet and Data buffer pointer.
+ */
+struct dwc2_dma_desc {
+	u32 status;
+	u32 buf;
+} __packed;
+
+/* Host Mode DMA descriptor status quadlet */
+
+#define HOST_DMA_A			BIT(31)
+#define HOST_DMA_STS_MASK		(0x3 << 28)
+#define HOST_DMA_STS_SHIFT		28
+#define HOST_DMA_STS_PKTERR		BIT(28)
+#define HOST_DMA_EOL			BIT(26)
+#define HOST_DMA_IOC			BIT(25)
+#define HOST_DMA_SUP			BIT(24)
+#define HOST_DMA_ALT_QTD		BIT(23)
+#define HOST_DMA_QTD_OFFSET_MASK	(0x3f << 17)
+#define HOST_DMA_QTD_OFFSET_SHIFT	17
+#define HOST_DMA_ISOC_NBYTES_MASK	(0xfff << 0)
+#define HOST_DMA_ISOC_NBYTES_SHIFT	0
+#define HOST_DMA_NBYTES_MASK		(0x1ffff << 0)
+#define HOST_DMA_NBYTES_SHIFT		0
+#define HOST_DMA_NBYTES_LIMIT		131071
+
+/* Device Mode DMA descriptor status quadlet */
+
+#define DEV_DMA_BUFF_STS_MASK		(0x3 << 30)
+#define DEV_DMA_BUFF_STS_SHIFT		30
+#define DEV_DMA_BUFF_STS_HREADY		0
+#define DEV_DMA_BUFF_STS_DMABUSY	1
+#define DEV_DMA_BUFF_STS_DMADONE	2
+#define DEV_DMA_BUFF_STS_HBUSY		3
+#define DEV_DMA_STS_MASK		(0x3 << 28)
+#define DEV_DMA_STS_SHIFT		28
+#define DEV_DMA_STS_SUCC		0
+#define DEV_DMA_STS_BUFF_FLUSH		1
+#define DEV_DMA_STS_BUFF_ERR		3
+#define DEV_DMA_L			BIT(27)
+#define DEV_DMA_SHORT			BIT(26)
+#define DEV_DMA_IOC			BIT(25)
+#define DEV_DMA_SR			BIT(24)
+#define DEV_DMA_MTRF			BIT(23)
+#define DEV_DMA_ISOC_PID_MASK		(0x3 << 23)
+#define DEV_DMA_ISOC_PID_SHIFT		23
+#define DEV_DMA_ISOC_PID_DATA0		0
+#define DEV_DMA_ISOC_PID_DATA2		1
+#define DEV_DMA_ISOC_PID_DATA1		2
+#define DEV_DMA_ISOC_PID_MDATA		3
+#define DEV_DMA_ISOC_FRNUM_MASK		(0x7ff << 12)
+#define DEV_DMA_ISOC_FRNUM_SHIFT	12
+#define DEV_DMA_ISOC_TX_NBYTES_MASK	(0xfff << 0)
+#define DEV_DMA_ISOC_TX_NBYTES_LIMIT	0xfff
+#define DEV_DMA_ISOC_RX_NBYTES_MASK	(0x7ff << 0)
+#define DEV_DMA_ISOC_RX_NBYTES_LIMIT	0x7ff
+#define DEV_DMA_ISOC_NBYTES_SHIFT	0
+#define DEV_DMA_NBYTES_MASK		(0xffff << 0)
+#define DEV_DMA_NBYTES_SHIFT		0
+#define DEV_DMA_NBYTES_LIMIT		0xffff
+
+#define MAX_DMA_DESC_NUM_GENERIC	64
+#define MAX_DMA_DESC_NUM_HS_ISOC	256
+
+#endif /* __DWC2_HW_H__ */
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
new file mode 100644
index 000000000..8eab5f38b
--- /dev/null
+++ b/drivers/usb/dwc2/params.c
@@ -0,0 +1,940 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2004-2016 Synopsys, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/usb/of.h>
+
+#include "core.h"
+
+static void dwc2_set_bcm_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->host_rx_fifo_size = 774;
+	p->max_transfer_size = 65535;
+	p->max_packet_count = 511;
+	p->ahbcfg = 0x10;
+}
+
+static void dwc2_set_his_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->otg_caps.hnp_support = false;
+	p->otg_caps.srp_support = false;
+	p->speed = DWC2_SPEED_PARAM_HIGH;
+	p->host_rx_fifo_size = 512;
+	p->host_nperio_tx_fifo_size = 512;
+	p->host_perio_tx_fifo_size = 512;
+	p->max_transfer_size = 65535;
+	p->max_packet_count = 511;
+	p->host_channels = 16;
+	p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI;
+	p->phy_utmi_width = 8;
+	p->i2c_enable = false;
+	p->reload_ctl = false;
+	p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
+		GAHBCFG_HBSTLEN_SHIFT;
+	p->change_speed_quirk = true;
+	p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+}
+
+static void dwc2_set_jz4775_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->otg_caps.hnp_support = false;
+	p->speed = DWC2_SPEED_PARAM_HIGH;
+	p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI;
+	p->phy_utmi_width = 16;
+	p->activate_ingenic_overcurrent_detection =
+		!device_property_read_bool(hsotg->dev, "disable-over-current");
+}
+
+static void dwc2_set_x1600_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->otg_caps.hnp_support = false;
+	p->speed = DWC2_SPEED_PARAM_HIGH;
+	p->host_channels = 16;
+	p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI;
+	p->phy_utmi_width = 16;
+	p->activate_ingenic_overcurrent_detection =
+		!device_property_read_bool(hsotg->dev, "disable-over-current");
+}
+
+static void dwc2_set_x2000_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->otg_caps.hnp_support = false;
+	p->speed = DWC2_SPEED_PARAM_HIGH;
+	p->host_rx_fifo_size = 1024;
+	p->host_nperio_tx_fifo_size = 1024;
+	p->host_perio_tx_fifo_size = 1024;
+	p->host_channels = 16;
+	p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI;
+	p->phy_utmi_width = 16;
+	p->activate_ingenic_overcurrent_detection =
+		!device_property_read_bool(hsotg->dev, "disable-over-current");
+}
+
+static void dwc2_set_s3c6400_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+	p->no_clock_gating = true;
+	p->phy_utmi_width = 8;
+}
+
+static void dwc2_set_socfpga_agilex_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+	p->no_clock_gating = true;
+}
+
+static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->otg_caps.hnp_support = false;
+	p->otg_caps.srp_support = false;
+	p->host_rx_fifo_size = 525;
+	p->host_nperio_tx_fifo_size = 128;
+	p->host_perio_tx_fifo_size = 256;
+	p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
+		GAHBCFG_HBSTLEN_SHIFT;
+	p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+}
+
+static void dwc2_set_ltq_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->otg_caps.hnp_support = false;
+	p->otg_caps.srp_support = false;
+	p->host_rx_fifo_size = 288;
+	p->host_nperio_tx_fifo_size = 128;
+	p->host_perio_tx_fifo_size = 96;
+	p->max_transfer_size = 65535;
+	p->max_packet_count = 511;
+	p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
+		GAHBCFG_HBSTLEN_SHIFT;
+}
+
+static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->otg_caps.hnp_support = false;
+	p->otg_caps.srp_support = false;
+	p->speed = DWC2_SPEED_PARAM_HIGH;
+	p->host_rx_fifo_size = 512;
+	p->host_nperio_tx_fifo_size = 500;
+	p->host_perio_tx_fifo_size = 500;
+	p->host_channels = 16;
+	p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI;
+	p->ahbcfg = GAHBCFG_HBSTLEN_INCR8 <<
+		GAHBCFG_HBSTLEN_SHIFT;
+	p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+}
+
+static void dwc2_set_amlogic_g12a_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->lpm = false;
+	p->lpm_clock_gating = false;
+	p->besl = false;
+	p->hird_threshold_en = false;
+}
+
+static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
+}
+
+static void dwc2_set_stm32f4x9_fsotg_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->otg_caps.hnp_support = false;
+	p->otg_caps.srp_support = false;
+	p->speed = DWC2_SPEED_PARAM_FULL;
+	p->host_rx_fifo_size = 128;
+	p->host_nperio_tx_fifo_size = 96;
+	p->host_perio_tx_fifo_size = 96;
+	p->max_packet_count = 256;
+	p->phy_type = DWC2_PHY_TYPE_PARAM_FS;
+	p->i2c_enable = false;
+	p->activate_stm_fs_transceiver = true;
+}
+
+static void dwc2_set_stm32f7_hsotg_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->host_rx_fifo_size = 622;
+	p->host_nperio_tx_fifo_size = 128;
+	p->host_perio_tx_fifo_size = 256;
+}
+
+static void dwc2_set_stm32mp15_fsotg_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->otg_caps.hnp_support = false;
+	p->otg_caps.srp_support = false;
+	p->otg_caps.otg_rev = 0x200;
+	p->speed = DWC2_SPEED_PARAM_FULL;
+	p->host_rx_fifo_size = 128;
+	p->host_nperio_tx_fifo_size = 96;
+	p->host_perio_tx_fifo_size = 96;
+	p->max_packet_count = 256;
+	p->phy_type = DWC2_PHY_TYPE_PARAM_FS;
+	p->i2c_enable = false;
+	p->activate_stm_fs_transceiver = true;
+	p->activate_stm_id_vb_detection = true;
+	p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
+	p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+	p->host_support_fs_ls_low_power = true;
+	p->host_ls_low_power_phy_clk = true;
+}
+
+static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->otg_caps.hnp_support = false;
+	p->otg_caps.srp_support = false;
+	p->otg_caps.otg_rev = 0x200;
+	p->activate_stm_id_vb_detection = !device_property_read_bool(hsotg->dev, "usb-role-switch");
+	p->host_rx_fifo_size = 440;
+	p->host_nperio_tx_fifo_size = 256;
+	p->host_perio_tx_fifo_size = 256;
+	p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
+	p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+	p->lpm = false;
+	p->lpm_clock_gating = false;
+	p->besl = false;
+	p->hird_threshold_en = false;
+}
+
+const struct of_device_id dwc2_of_match_table[] = {
+	{ .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
+	{ .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params },
+	{ .compatible = "ingenic,jz4775-otg", .data = dwc2_set_jz4775_params },
+	{ .compatible = "ingenic,jz4780-otg", .data = dwc2_set_jz4775_params },
+	{ .compatible = "ingenic,x1000-otg", .data = dwc2_set_jz4775_params },
+	{ .compatible = "ingenic,x1600-otg", .data = dwc2_set_x1600_params },
+	{ .compatible = "ingenic,x1700-otg", .data = dwc2_set_x1600_params },
+	{ .compatible = "ingenic,x1830-otg", .data = dwc2_set_x1600_params },
+	{ .compatible = "ingenic,x2000-otg", .data = dwc2_set_x2000_params },
+	{ .compatible = "rockchip,rk3066-usb", .data = dwc2_set_rk_params },
+	{ .compatible = "lantiq,arx100-usb", .data = dwc2_set_ltq_params },
+	{ .compatible = "lantiq,xrx200-usb", .data = dwc2_set_ltq_params },
+	{ .compatible = "snps,dwc2" },
+	{ .compatible = "samsung,s3c6400-hsotg",
+	  .data = dwc2_set_s3c6400_params },
+	{ .compatible = "amlogic,meson8-usb",
+	  .data = dwc2_set_amlogic_params },
+	{ .compatible = "amlogic,meson8b-usb",
+	  .data = dwc2_set_amlogic_params },
+	{ .compatible = "amlogic,meson-gxbb-usb",
+	  .data = dwc2_set_amlogic_params },
+	{ .compatible = "amlogic,meson-g12a-usb",
+	  .data = dwc2_set_amlogic_g12a_params },
+	{ .compatible = "amcc,dwc-otg", .data = dwc2_set_amcc_params },
+	{ .compatible = "apm,apm82181-dwc-otg", .data = dwc2_set_amcc_params },
+	{ .compatible = "st,stm32f4x9-fsotg",
+	  .data = dwc2_set_stm32f4x9_fsotg_params },
+	{ .compatible = "st,stm32f4x9-hsotg" },
+	{ .compatible = "st,stm32f7-hsotg",
+	  .data = dwc2_set_stm32f7_hsotg_params },
+	{ .compatible = "st,stm32mp15-fsotg",
+	  .data = dwc2_set_stm32mp15_fsotg_params },
+	{ .compatible = "st,stm32mp15-hsotg",
+	  .data = dwc2_set_stm32mp15_hsotg_params },
+	{ .compatible = "intel,socfpga-agilex-hsotg",
+	  .data = dwc2_set_socfpga_agilex_params },
+	{},
+};
+MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
+
+const struct acpi_device_id dwc2_acpi_match[] = {
+	{ "BCM2848", (kernel_ulong_t)dwc2_set_bcm_params },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, dwc2_acpi_match);
+
+static void dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg)
+{
+	switch (hsotg->hw_params.op_mode) {
+	case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
+		hsotg->params.otg_caps.hnp_support = true;
+		hsotg->params.otg_caps.srp_support = true;
+		break;
+	case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
+	case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
+	case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
+		hsotg->params.otg_caps.hnp_support = false;
+		hsotg->params.otg_caps.srp_support = true;
+		break;
+	default:
+		hsotg->params.otg_caps.hnp_support = false;
+		hsotg->params.otg_caps.srp_support = false;
+		break;
+	}
+}
+
+static void dwc2_set_param_phy_type(struct dwc2_hsotg *hsotg)
+{
+	int val;
+	u32 hs_phy_type = hsotg->hw_params.hs_phy_type;
+
+	val = DWC2_PHY_TYPE_PARAM_FS;
+	if (hs_phy_type != GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED) {
+		if (hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI ||
+		    hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI)
+			val = DWC2_PHY_TYPE_PARAM_UTMI;
+		else
+			val = DWC2_PHY_TYPE_PARAM_ULPI;
+	}
+
+	if (dwc2_is_fs_iot(hsotg))
+		hsotg->params.phy_type = DWC2_PHY_TYPE_PARAM_FS;
+
+	hsotg->params.phy_type = val;
+}
+
+static void dwc2_set_param_speed(struct dwc2_hsotg *hsotg)
+{
+	int val;
+
+	val = hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS ?
+		DWC2_SPEED_PARAM_FULL : DWC2_SPEED_PARAM_HIGH;
+
+	if (dwc2_is_fs_iot(hsotg))
+		val = DWC2_SPEED_PARAM_FULL;
+
+	if (dwc2_is_hs_iot(hsotg))
+		val = DWC2_SPEED_PARAM_HIGH;
+
+	hsotg->params.speed = val;
+}
+
+static void dwc2_set_param_phy_utmi_width(struct dwc2_hsotg *hsotg)
+{
+	int val;
+
+	val = (hsotg->hw_params.utmi_phy_data_width ==
+	       GHWCFG4_UTMI_PHY_DATA_WIDTH_8) ? 8 : 16;
+
+	if (hsotg->phy) {
+		/*
+		 * If using the generic PHY framework, check if the PHY bus
+		 * width is 8-bit and set the phyif appropriately.
+		 */
+		if (phy_get_bus_width(hsotg->phy) == 8)
+			val = 8;
+	}
+
+	hsotg->params.phy_utmi_width = val;
+}
+
+static void dwc2_set_param_tx_fifo_sizes(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+	int depth_average;
+	int fifo_count;
+	int i;
+
+	fifo_count = dwc2_hsotg_tx_fifo_count(hsotg);
+
+	memset(p->g_tx_fifo_size, 0, sizeof(p->g_tx_fifo_size));
+	depth_average = dwc2_hsotg_tx_fifo_average_depth(hsotg);
+	for (i = 1; i <= fifo_count; i++)
+		p->g_tx_fifo_size[i] = depth_average;
+}
+
+static void dwc2_set_param_power_down(struct dwc2_hsotg *hsotg)
+{
+	int val;
+
+	if (hsotg->hw_params.hibernation)
+		val = DWC2_POWER_DOWN_PARAM_HIBERNATION;
+	else if (hsotg->hw_params.power_optimized)
+		val = DWC2_POWER_DOWN_PARAM_PARTIAL;
+	else
+		val = DWC2_POWER_DOWN_PARAM_NONE;
+
+	hsotg->params.power_down = val;
+}
+
+static void dwc2_set_param_lpm(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->lpm = hsotg->hw_params.lpm_mode;
+	if (p->lpm) {
+		p->lpm_clock_gating = true;
+		p->besl = true;
+		p->hird_threshold_en = true;
+		p->hird_threshold = 4;
+	} else {
+		p->lpm_clock_gating = false;
+		p->besl = false;
+		p->hird_threshold_en = false;
+	}
+}
+
+/**
+ * dwc2_set_default_params() - Set all core parameters to their
+ * auto-detected default values.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ */
+static void dwc2_set_default_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hw_params *hw = &hsotg->hw_params;
+	struct dwc2_core_params *p = &hsotg->params;
+	bool dma_capable = !(hw->arch == GHWCFG2_SLAVE_ONLY_ARCH);
+
+	dwc2_set_param_otg_cap(hsotg);
+	dwc2_set_param_phy_type(hsotg);
+	dwc2_set_param_speed(hsotg);
+	dwc2_set_param_phy_utmi_width(hsotg);
+	dwc2_set_param_power_down(hsotg);
+	dwc2_set_param_lpm(hsotg);
+	p->phy_ulpi_ddr = false;
+	p->phy_ulpi_ext_vbus = false;
+
+	p->enable_dynamic_fifo = hw->enable_dynamic_fifo;
+	p->en_multiple_tx_fifo = hw->en_multiple_tx_fifo;
+	p->i2c_enable = hw->i2c_enable;
+	p->acg_enable = hw->acg_enable;
+	p->ulpi_fs_ls = false;
+	p->ts_dline = false;
+	p->reload_ctl = (hw->snpsid >= DWC2_CORE_REV_2_92a);
+	p->uframe_sched = true;
+	p->external_id_pin_ctl = false;
+	p->ipg_isoc_en = false;
+	p->service_interval = false;
+	p->max_packet_count = hw->max_packet_count;
+	p->max_transfer_size = hw->max_transfer_size;
+	p->ahbcfg = GAHBCFG_HBSTLEN_INCR << GAHBCFG_HBSTLEN_SHIFT;
+	p->ref_clk_per = 33333;
+	p->sof_cnt_wkup_alert = 100;
+
+	if ((hsotg->dr_mode == USB_DR_MODE_HOST) ||
+	    (hsotg->dr_mode == USB_DR_MODE_OTG)) {
+		p->host_dma = dma_capable;
+		p->dma_desc_enable = false;
+		p->dma_desc_fs_enable = false;
+		p->host_support_fs_ls_low_power = false;
+		p->host_ls_low_power_phy_clk = false;
+		p->host_channels = hw->host_channels;
+		p->host_rx_fifo_size = hw->rx_fifo_size;
+		p->host_nperio_tx_fifo_size = hw->host_nperio_tx_fifo_size;
+		p->host_perio_tx_fifo_size = hw->host_perio_tx_fifo_size;
+	}
+
+	if ((hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) ||
+	    (hsotg->dr_mode == USB_DR_MODE_OTG)) {
+		p->g_dma = dma_capable;
+		p->g_dma_desc = hw->dma_desc_enable;
+
+		/*
+		 * The values for g_rx_fifo_size (2048) and
+		 * g_np_tx_fifo_size (1024) come from the legacy s3c
+		 * gadget driver. These defaults have been hard-coded
+		 * for some time so many platforms depend on these
+		 * values. Leave them as defaults for now and only
+		 * auto-detect if the hardware does not support the
+		 * default.
+		 */
+		p->g_rx_fifo_size = 2048;
+		p->g_np_tx_fifo_size = 1024;
+		dwc2_set_param_tx_fifo_sizes(hsotg);
+	}
+}
+
+/**
+ * dwc2_get_device_properties() - Read in device properties.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ * Read in the device properties and adjust core parameters if needed.
+ */
+static void dwc2_get_device_properties(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+	int num;
+
+	if ((hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) ||
+	    (hsotg->dr_mode == USB_DR_MODE_OTG)) {
+		device_property_read_u32(hsotg->dev, "g-rx-fifo-size",
+					 &p->g_rx_fifo_size);
+
+		device_property_read_u32(hsotg->dev, "g-np-tx-fifo-size",
+					 &p->g_np_tx_fifo_size);
+
+		num = device_property_count_u32(hsotg->dev, "g-tx-fifo-size");
+		if (num > 0) {
+			num = min(num, 15);
+			memset(p->g_tx_fifo_size, 0,
+			       sizeof(p->g_tx_fifo_size));
+			device_property_read_u32_array(hsotg->dev,
+						       "g-tx-fifo-size",
+						       &p->g_tx_fifo_size[1],
+						       num);
+		}
+
+		of_usb_update_otg_caps(hsotg->dev->of_node, &p->otg_caps);
+	}
+
+	if (of_find_property(hsotg->dev->of_node, "disable-over-current", NULL))
+		p->oc_disable = true;
+}
+
+static void dwc2_check_param_otg_cap(struct dwc2_hsotg *hsotg)
+{
+	int valid = 1;
+
+	if (hsotg->params.otg_caps.hnp_support && hsotg->params.otg_caps.srp_support) {
+		/* check HNP && SRP capable */
+		if (hsotg->hw_params.op_mode != GHWCFG2_OP_MODE_HNP_SRP_CAPABLE)
+			valid = 0;
+	} else if (!hsotg->params.otg_caps.hnp_support) {
+		/* check SRP only capable */
+		if (hsotg->params.otg_caps.srp_support) {
+			switch (hsotg->hw_params.op_mode) {
+			case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
+			case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
+			case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
+			case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
+				break;
+			default:
+				valid = 0;
+				break;
+			}
+		}
+		/* else: NO HNP && NO SRP capable: always valid */
+	} else {
+		valid = 0;
+	}
+
+	if (!valid)
+		dwc2_set_param_otg_cap(hsotg);
+}
+
+static void dwc2_check_param_phy_type(struct dwc2_hsotg *hsotg)
+{
+	int valid = 0;
+	u32 hs_phy_type;
+	u32 fs_phy_type;
+
+	hs_phy_type = hsotg->hw_params.hs_phy_type;
+	fs_phy_type = hsotg->hw_params.fs_phy_type;
+
+	switch (hsotg->params.phy_type) {
+	case DWC2_PHY_TYPE_PARAM_FS:
+		if (fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED)
+			valid = 1;
+		break;
+	case DWC2_PHY_TYPE_PARAM_UTMI:
+		if ((hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI) ||
+		    (hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI))
+			valid = 1;
+		break;
+	case DWC2_PHY_TYPE_PARAM_ULPI:
+		if ((hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI) ||
+		    (hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI))
+			valid = 1;
+		break;
+	default:
+		break;
+	}
+
+	if (!valid)
+		dwc2_set_param_phy_type(hsotg);
+}
+
+static void dwc2_check_param_speed(struct dwc2_hsotg *hsotg)
+{
+	int valid = 1;
+	int phy_type = hsotg->params.phy_type;
+	int speed = hsotg->params.speed;
+
+	switch (speed) {
+	case DWC2_SPEED_PARAM_HIGH:
+		if ((hsotg->params.speed == DWC2_SPEED_PARAM_HIGH) &&
+		    (phy_type == DWC2_PHY_TYPE_PARAM_FS))
+			valid = 0;
+		break;
+	case DWC2_SPEED_PARAM_FULL:
+	case DWC2_SPEED_PARAM_LOW:
+		break;
+	default:
+		valid = 0;
+		break;
+	}
+
+	if (!valid)
+		dwc2_set_param_speed(hsotg);
+}
+
+static void dwc2_check_param_phy_utmi_width(struct dwc2_hsotg *hsotg)
+{
+	int valid = 0;
+	int param = hsotg->params.phy_utmi_width;
+	int width = hsotg->hw_params.utmi_phy_data_width;
+
+	switch (width) {
+	case GHWCFG4_UTMI_PHY_DATA_WIDTH_8:
+		valid = (param == 8);
+		break;
+	case GHWCFG4_UTMI_PHY_DATA_WIDTH_16:
+		valid = (param == 16);
+		break;
+	case GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16:
+		valid = (param == 8 || param == 16);
+		break;
+	}
+
+	if (!valid)
+		dwc2_set_param_phy_utmi_width(hsotg);
+}
+
+static void dwc2_check_param_power_down(struct dwc2_hsotg *hsotg)
+{
+	int param = hsotg->params.power_down;
+
+	switch (param) {
+	case DWC2_POWER_DOWN_PARAM_NONE:
+		break;
+	case DWC2_POWER_DOWN_PARAM_PARTIAL:
+		if (hsotg->hw_params.power_optimized)
+			break;
+		dev_dbg(hsotg->dev,
+			"Partial power down isn't supported by HW\n");
+		param = DWC2_POWER_DOWN_PARAM_NONE;
+		break;
+	case DWC2_POWER_DOWN_PARAM_HIBERNATION:
+		if (hsotg->hw_params.hibernation)
+			break;
+		dev_dbg(hsotg->dev,
+			"Hibernation isn't supported by HW\n");
+		param = DWC2_POWER_DOWN_PARAM_NONE;
+		break;
+	default:
+		dev_err(hsotg->dev,
+			"%s: Invalid parameter power_down=%d\n",
+			__func__, param);
+		param = DWC2_POWER_DOWN_PARAM_NONE;
+		break;
+	}
+
+	hsotg->params.power_down = param;
+}
+
+static void dwc2_check_param_tx_fifo_sizes(struct dwc2_hsotg *hsotg)
+{
+	int fifo_count;
+	int fifo;
+	int min;
+	u32 total = 0;
+	u32 dptxfszn;
+
+	fifo_count = dwc2_hsotg_tx_fifo_count(hsotg);
+	min = hsotg->hw_params.en_multiple_tx_fifo ? 16 : 4;
+
+	for (fifo = 1; fifo <= fifo_count; fifo++)
+		total += hsotg->params.g_tx_fifo_size[fifo];
+
+	if (total > dwc2_hsotg_tx_fifo_total_depth(hsotg) || !total) {
+		dev_warn(hsotg->dev, "%s: Invalid parameter g-tx-fifo-size, setting to default average\n",
+			 __func__);
+		dwc2_set_param_tx_fifo_sizes(hsotg);
+	}
+
+	for (fifo = 1; fifo <= fifo_count; fifo++) {
+		dptxfszn = hsotg->hw_params.g_tx_fifo_size[fifo];
+
+		if (hsotg->params.g_tx_fifo_size[fifo] < min ||
+		    hsotg->params.g_tx_fifo_size[fifo] >  dptxfszn) {
+			dev_warn(hsotg->dev, "%s: Invalid parameter g_tx_fifo_size[%d]=%d\n",
+				 __func__, fifo,
+				 hsotg->params.g_tx_fifo_size[fifo]);
+			hsotg->params.g_tx_fifo_size[fifo] = dptxfszn;
+		}
+	}
+}
+
+#define CHECK_RANGE(_param, _min, _max, _def) do {			\
+		if ((int)(hsotg->params._param) < (_min) ||		\
+		    (hsotg->params._param) > (_max)) {			\
+			dev_warn(hsotg->dev, "%s: Invalid parameter %s=%d\n", \
+				 __func__, #_param, hsotg->params._param); \
+			hsotg->params._param = (_def);			\
+		}							\
+	} while (0)
+
+#define CHECK_BOOL(_param, _check) do {					\
+		if (hsotg->params._param && !(_check)) {		\
+			dev_warn(hsotg->dev, "%s: Invalid parameter %s=%d\n", \
+				 __func__, #_param, hsotg->params._param); \
+			hsotg->params._param = false;			\
+		}							\
+	} while (0)
+
+static void dwc2_check_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hw_params *hw = &hsotg->hw_params;
+	struct dwc2_core_params *p = &hsotg->params;
+	bool dma_capable = !(hw->arch == GHWCFG2_SLAVE_ONLY_ARCH);
+
+	dwc2_check_param_otg_cap(hsotg);
+	dwc2_check_param_phy_type(hsotg);
+	dwc2_check_param_speed(hsotg);
+	dwc2_check_param_phy_utmi_width(hsotg);
+	dwc2_check_param_power_down(hsotg);
+	CHECK_BOOL(enable_dynamic_fifo, hw->enable_dynamic_fifo);
+	CHECK_BOOL(en_multiple_tx_fifo, hw->en_multiple_tx_fifo);
+	CHECK_BOOL(i2c_enable, hw->i2c_enable);
+	CHECK_BOOL(ipg_isoc_en, hw->ipg_isoc_en);
+	CHECK_BOOL(acg_enable, hw->acg_enable);
+	CHECK_BOOL(reload_ctl, (hsotg->hw_params.snpsid > DWC2_CORE_REV_2_92a));
+	CHECK_BOOL(lpm, (hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_80a));
+	CHECK_BOOL(lpm, hw->lpm_mode);
+	CHECK_BOOL(lpm_clock_gating, hsotg->params.lpm);
+	CHECK_BOOL(besl, hsotg->params.lpm);
+	CHECK_BOOL(besl, (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a));
+	CHECK_BOOL(hird_threshold_en, hsotg->params.lpm);
+	CHECK_RANGE(hird_threshold, 0, hsotg->params.besl ? 12 : 7, 0);
+	CHECK_BOOL(service_interval, hw->service_interval_mode);
+	CHECK_RANGE(max_packet_count,
+		    15, hw->max_packet_count,
+		    hw->max_packet_count);
+	CHECK_RANGE(max_transfer_size,
+		    2047, hw->max_transfer_size,
+		    hw->max_transfer_size);
+
+	if ((hsotg->dr_mode == USB_DR_MODE_HOST) ||
+	    (hsotg->dr_mode == USB_DR_MODE_OTG)) {
+		CHECK_BOOL(host_dma, dma_capable);
+		CHECK_BOOL(dma_desc_enable, p->host_dma);
+		CHECK_BOOL(dma_desc_fs_enable, p->dma_desc_enable);
+		CHECK_BOOL(host_ls_low_power_phy_clk,
+			   p->phy_type == DWC2_PHY_TYPE_PARAM_FS);
+		CHECK_RANGE(host_channels,
+			    1, hw->host_channels,
+			    hw->host_channels);
+		CHECK_RANGE(host_rx_fifo_size,
+			    16, hw->rx_fifo_size,
+			    hw->rx_fifo_size);
+		CHECK_RANGE(host_nperio_tx_fifo_size,
+			    16, hw->host_nperio_tx_fifo_size,
+			    hw->host_nperio_tx_fifo_size);
+		CHECK_RANGE(host_perio_tx_fifo_size,
+			    16, hw->host_perio_tx_fifo_size,
+			    hw->host_perio_tx_fifo_size);
+	}
+
+	if ((hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) ||
+	    (hsotg->dr_mode == USB_DR_MODE_OTG)) {
+		CHECK_BOOL(g_dma, dma_capable);
+		CHECK_BOOL(g_dma_desc, (p->g_dma && hw->dma_desc_enable));
+		CHECK_RANGE(g_rx_fifo_size,
+			    16, hw->rx_fifo_size,
+			    hw->rx_fifo_size);
+		CHECK_RANGE(g_np_tx_fifo_size,
+			    16, hw->dev_nperio_tx_fifo_size,
+			    hw->dev_nperio_tx_fifo_size);
+		dwc2_check_param_tx_fifo_sizes(hsotg);
+	}
+}
+
+/*
+ * Gets host hardware parameters. Forces host mode if not currently in
+ * host mode. Should be called immediately after a core soft reset in
+ * order to get the reset values.
+ */
+static void dwc2_get_host_hwparams(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hw_params *hw = &hsotg->hw_params;
+	u32 gnptxfsiz;
+	u32 hptxfsiz;
+
+	if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
+		return;
+
+	dwc2_force_mode(hsotg, true);
+
+	gnptxfsiz = dwc2_readl(hsotg, GNPTXFSIZ);
+	hptxfsiz = dwc2_readl(hsotg, HPTXFSIZ);
+
+	hw->host_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
+				       FIFOSIZE_DEPTH_SHIFT;
+	hw->host_perio_tx_fifo_size = (hptxfsiz & FIFOSIZE_DEPTH_MASK) >>
+				      FIFOSIZE_DEPTH_SHIFT;
+}
+
+/*
+ * Gets device hardware parameters. Forces device mode if not
+ * currently in device mode. Should be called immediately after a core
+ * soft reset in order to get the reset values.
+ */
+static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hw_params *hw = &hsotg->hw_params;
+	u32 gnptxfsiz;
+	int fifo, fifo_count;
+
+	if (hsotg->dr_mode == USB_DR_MODE_HOST)
+		return;
+
+	dwc2_force_mode(hsotg, false);
+
+	gnptxfsiz = dwc2_readl(hsotg, GNPTXFSIZ);
+
+	fifo_count = dwc2_hsotg_tx_fifo_count(hsotg);
+
+	for (fifo = 1; fifo <= fifo_count; fifo++) {
+		hw->g_tx_fifo_size[fifo] =
+			(dwc2_readl(hsotg, DPTXFSIZN(fifo)) &
+			 FIFOSIZE_DEPTH_MASK) >> FIFOSIZE_DEPTH_SHIFT;
+	}
+
+	hw->dev_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
+				       FIFOSIZE_DEPTH_SHIFT;
+}
+
+/**
+ * dwc2_get_hwparams() - During device initialization, read various hardware
+ *                       configuration registers and interpret the contents.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ */
+int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hw_params *hw = &hsotg->hw_params;
+	unsigned int width;
+	u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4;
+	u32 grxfsiz;
+
+	hwcfg1 = dwc2_readl(hsotg, GHWCFG1);
+	hwcfg2 = dwc2_readl(hsotg, GHWCFG2);
+	hwcfg3 = dwc2_readl(hsotg, GHWCFG3);
+	hwcfg4 = dwc2_readl(hsotg, GHWCFG4);
+	grxfsiz = dwc2_readl(hsotg, GRXFSIZ);
+
+	/* hwcfg1 */
+	hw->dev_ep_dirs = hwcfg1;
+
+	/* hwcfg2 */
+	hw->op_mode = (hwcfg2 & GHWCFG2_OP_MODE_MASK) >>
+		      GHWCFG2_OP_MODE_SHIFT;
+	hw->arch = (hwcfg2 & GHWCFG2_ARCHITECTURE_MASK) >>
+		   GHWCFG2_ARCHITECTURE_SHIFT;
+	hw->enable_dynamic_fifo = !!(hwcfg2 & GHWCFG2_DYNAMIC_FIFO);
+	hw->host_channels = 1 + ((hwcfg2 & GHWCFG2_NUM_HOST_CHAN_MASK) >>
+				GHWCFG2_NUM_HOST_CHAN_SHIFT);
+	hw->hs_phy_type = (hwcfg2 & GHWCFG2_HS_PHY_TYPE_MASK) >>
+			  GHWCFG2_HS_PHY_TYPE_SHIFT;
+	hw->fs_phy_type = (hwcfg2 & GHWCFG2_FS_PHY_TYPE_MASK) >>
+			  GHWCFG2_FS_PHY_TYPE_SHIFT;
+	hw->num_dev_ep = (hwcfg2 & GHWCFG2_NUM_DEV_EP_MASK) >>
+			 GHWCFG2_NUM_DEV_EP_SHIFT;
+	hw->nperio_tx_q_depth =
+		(hwcfg2 & GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK) >>
+		GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT << 1;
+	hw->host_perio_tx_q_depth =
+		(hwcfg2 & GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK) >>
+		GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT << 1;
+	hw->dev_token_q_depth =
+		(hwcfg2 & GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK) >>
+		GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT;
+
+	/* hwcfg3 */
+	width = (hwcfg3 & GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK) >>
+		GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT;
+	hw->max_transfer_size = (1 << (width + 11)) - 1;
+	width = (hwcfg3 & GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK) >>
+		GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT;
+	hw->max_packet_count = (1 << (width + 4)) - 1;
+	hw->i2c_enable = !!(hwcfg3 & GHWCFG3_I2C);
+	hw->total_fifo_size = (hwcfg3 & GHWCFG3_DFIFO_DEPTH_MASK) >>
+			      GHWCFG3_DFIFO_DEPTH_SHIFT;
+	hw->lpm_mode = !!(hwcfg3 & GHWCFG3_OTG_LPM_EN);
+
+	/* hwcfg4 */
+	hw->en_multiple_tx_fifo = !!(hwcfg4 & GHWCFG4_DED_FIFO_EN);
+	hw->num_dev_perio_in_ep = (hwcfg4 & GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK) >>
+				  GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT;
+	hw->num_dev_in_eps = (hwcfg4 & GHWCFG4_NUM_IN_EPS_MASK) >>
+			     GHWCFG4_NUM_IN_EPS_SHIFT;
+	hw->dma_desc_enable = !!(hwcfg4 & GHWCFG4_DESC_DMA);
+	hw->power_optimized = !!(hwcfg4 & GHWCFG4_POWER_OPTIMIZ);
+	hw->hibernation = !!(hwcfg4 & GHWCFG4_HIBER);
+	hw->utmi_phy_data_width = (hwcfg4 & GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK) >>
+				  GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT;
+	hw->acg_enable = !!(hwcfg4 & GHWCFG4_ACG_SUPPORTED);
+	hw->ipg_isoc_en = !!(hwcfg4 & GHWCFG4_IPG_ISOC_SUPPORTED);
+	hw->service_interval_mode = !!(hwcfg4 &
+				       GHWCFG4_SERVICE_INTERVAL_SUPPORTED);
+
+	/* fifo sizes */
+	hw->rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >>
+				GRXFSIZ_DEPTH_SHIFT;
+	/*
+	 * Host specific hardware parameters. Reading these parameters
+	 * requires the controller to be in host mode. The mode will
+	 * be forced, if necessary, to read these values.
+	 */
+	dwc2_get_host_hwparams(hsotg);
+	dwc2_get_dev_hwparams(hsotg);
+
+	return 0;
+}
+
+typedef void (*set_params_cb)(struct dwc2_hsotg *data);
+
+int dwc2_init_params(struct dwc2_hsotg *hsotg)
+{
+	const struct of_device_id *match;
+	set_params_cb set_params;
+
+	dwc2_set_default_params(hsotg);
+	dwc2_get_device_properties(hsotg);
+
+	match = of_match_device(dwc2_of_match_table, hsotg->dev);
+	if (match && match->data) {
+		set_params = match->data;
+		set_params(hsotg);
+	} else {
+		const struct acpi_device_id *amatch;
+
+		amatch = acpi_match_device(dwc2_acpi_match, hsotg->dev);
+		if (amatch && amatch->driver_data) {
+			set_params = (set_params_cb)amatch->driver_data;
+			set_params(hsotg);
+		}
+	}
+
+	dwc2_check_params(hsotg);
+
+	return 0;
+}
diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c
new file mode 100644
index 000000000..b7306ed8b
--- /dev/null
+++ b/drivers/usb/dwc2/pci.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * pci.c - DesignWare HS OTG Controller PCI driver
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ */
+
+/*
+ * Provides the initialization and cleanup entry points for the DWC_otg PCI
+ * driver
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+#include <linux/platform_device.h>
+#include <linux/usb/usb_phy_generic.h>
+
+#define PCI_PRODUCT_ID_HAPS_HSOTG	0xabc0
+
+static const char dwc2_driver_name[] = "dwc2-pci";
+
+struct dwc2_pci_glue {
+	struct platform_device *dwc2;
+	struct platform_device *phy;
+};
+
+/**
+ * dwc2_pci_remove() - Provides the cleanup entry points for the DWC_otg PCI
+ * driver
+ *
+ * @pci: The programming view of DWC_otg PCI
+ */
+static void dwc2_pci_remove(struct pci_dev *pci)
+{
+	struct dwc2_pci_glue *glue = pci_get_drvdata(pci);
+
+	platform_device_unregister(glue->dwc2);
+	usb_phy_generic_unregister(glue->phy);
+	pci_set_drvdata(pci, NULL);
+}
+
+static int dwc2_pci_probe(struct pci_dev *pci,
+			  const struct pci_device_id *id)
+{
+	struct resource		res[2];
+	struct platform_device	*dwc2;
+	struct platform_device	*phy;
+	int			ret;
+	struct device		*dev = &pci->dev;
+	struct dwc2_pci_glue	*glue;
+
+	ret = pcim_enable_device(pci);
+	if (ret) {
+		dev_err(dev, "failed to enable pci device\n");
+		return -ENODEV;
+	}
+
+	pci_set_master(pci);
+
+	phy = usb_phy_generic_register();
+	if (IS_ERR(phy)) {
+		dev_err(dev, "error registering generic PHY (%ld)\n",
+			PTR_ERR(phy));
+		return PTR_ERR(phy);
+	}
+
+	dwc2 = platform_device_alloc("dwc2", PLATFORM_DEVID_AUTO);
+	if (!dwc2) {
+		dev_err(dev, "couldn't allocate dwc2 device\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
+
+	res[0].start	= pci_resource_start(pci, 0);
+	res[0].end	= pci_resource_end(pci, 0);
+	res[0].name	= "dwc2";
+	res[0].flags	= IORESOURCE_MEM;
+
+	res[1].start	= pci->irq;
+	res[1].name	= "dwc2";
+	res[1].flags	= IORESOURCE_IRQ;
+
+	ret = platform_device_add_resources(dwc2, res, ARRAY_SIZE(res));
+	if (ret) {
+		dev_err(dev, "couldn't add resources to dwc2 device\n");
+		goto err;
+	}
+
+	dwc2->dev.parent = dev;
+
+	glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ret = platform_device_add(dwc2);
+	if (ret) {
+		dev_err(dev, "failed to register dwc2 device\n");
+		goto err;
+	}
+
+	glue->phy = phy;
+	glue->dwc2 = dwc2;
+	pci_set_drvdata(pci, glue);
+
+	return 0;
+err:
+	usb_phy_generic_unregister(phy);
+	platform_device_put(dwc2);
+	return ret;
+}
+
+static const struct pci_device_id dwc2_pci_ids[] = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_PRODUCT_ID_HAPS_HSOTG),
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_STMICRO,
+			   PCI_DEVICE_ID_STMICRO_USB_OTG),
+	},
+	{ /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, dwc2_pci_ids);
+
+static struct pci_driver dwc2_pci_driver = {
+	.name = dwc2_driver_name,
+	.id_table = dwc2_pci_ids,
+	.probe = dwc2_pci_probe,
+	.remove = dwc2_pci_remove,
+};
+
+module_pci_driver(dwc2_pci_driver);
+
+MODULE_DESCRIPTION("DESIGNWARE HS OTG PCI Bus Glue");
+MODULE_AUTHOR("Synopsys, Inc.");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
new file mode 100644
index 000000000..58f53faab
--- /dev/null
+++ b/drivers/usb/dwc2/platform.c
@@ -0,0 +1,730 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * platform.c - DesignWare HS OTG Controller platform driver
+ *
+ * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_device.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_data/s3c-hsotg.h>
+#include <linux/reset.h>
+
+#include <linux/usb/of.h>
+
+#include "core.h"
+#include "hcd.h"
+#include "debug.h"
+
+static const char dwc2_driver_name[] = "dwc2";
+
+/*
+ * Check the dr_mode against the module configuration and hardware
+ * capabilities.
+ *
+ * The hardware, module, and dr_mode, can each be set to host, device,
+ * or otg. Check that all these values are compatible and adjust the
+ * value of dr_mode if possible.
+ *
+ *                      actual
+ *    HW  MOD dr_mode   dr_mode
+ *  ------------------------------
+ *   HST  HST  any    :  HST
+ *   HST  DEV  any    :  ---
+ *   HST  OTG  any    :  HST
+ *
+ *   DEV  HST  any    :  ---
+ *   DEV  DEV  any    :  DEV
+ *   DEV  OTG  any    :  DEV
+ *
+ *   OTG  HST  any    :  HST
+ *   OTG  DEV  any    :  DEV
+ *   OTG  OTG  any    :  dr_mode
+ */
+static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
+{
+	enum usb_dr_mode mode;
+
+	hsotg->dr_mode = usb_get_dr_mode(hsotg->dev);
+	if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN)
+		hsotg->dr_mode = USB_DR_MODE_OTG;
+
+	mode = hsotg->dr_mode;
+
+	if (dwc2_hw_is_device(hsotg)) {
+		if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
+			dev_err(hsotg->dev,
+				"Controller does not support host mode.\n");
+			return -EINVAL;
+		}
+		mode = USB_DR_MODE_PERIPHERAL;
+	} else if (dwc2_hw_is_host(hsotg)) {
+		if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
+			dev_err(hsotg->dev,
+				"Controller does not support device mode.\n");
+			return -EINVAL;
+		}
+		mode = USB_DR_MODE_HOST;
+	} else {
+		if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
+			mode = USB_DR_MODE_HOST;
+		else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
+			mode = USB_DR_MODE_PERIPHERAL;
+	}
+
+	if (mode != hsotg->dr_mode) {
+		dev_warn(hsotg->dev,
+			 "Configuration mismatch. dr_mode forced to %s\n",
+			mode == USB_DR_MODE_HOST ? "host" : "device");
+
+		hsotg->dr_mode = mode;
+	}
+
+	return 0;
+}
+
+static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
+{
+	struct platform_device *pdev = to_platform_device(hsotg->dev);
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
+				    hsotg->supplies);
+	if (ret)
+		return ret;
+
+	if (hsotg->clk) {
+		ret = clk_prepare_enable(hsotg->clk);
+		if (ret)
+			return ret;
+	}
+
+	if (hsotg->uphy) {
+		ret = usb_phy_init(hsotg->uphy);
+	} else if (hsotg->plat && hsotg->plat->phy_init) {
+		ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
+	} else {
+		ret = phy_init(hsotg->phy);
+		if (ret == 0)
+			ret = phy_power_on(hsotg->phy);
+	}
+
+	return ret;
+}
+
+/**
+ * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
+ * @hsotg: The driver state
+ *
+ * A wrapper for platform code responsible for controlling
+ * low-level USB platform resources (phy, clock, regulators)
+ */
+int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
+{
+	int ret = __dwc2_lowlevel_hw_enable(hsotg);
+
+	if (ret == 0)
+		hsotg->ll_hw_enabled = true;
+	return ret;
+}
+
+static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
+{
+	struct platform_device *pdev = to_platform_device(hsotg->dev);
+	int ret = 0;
+
+	if (hsotg->uphy) {
+		usb_phy_shutdown(hsotg->uphy);
+	} else if (hsotg->plat && hsotg->plat->phy_exit) {
+		ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
+	} else {
+		ret = phy_power_off(hsotg->phy);
+		if (ret == 0)
+			ret = phy_exit(hsotg->phy);
+	}
+	if (ret)
+		return ret;
+
+	if (hsotg->clk)
+		clk_disable_unprepare(hsotg->clk);
+
+	return regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
+}
+
+/**
+ * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
+ * @hsotg: The driver state
+ *
+ * A wrapper for platform code responsible for controlling
+ * low-level USB platform resources (phy, clock, regulators)
+ */
+int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
+{
+	int ret = __dwc2_lowlevel_hw_disable(hsotg);
+
+	if (ret == 0)
+		hsotg->ll_hw_enabled = false;
+	return ret;
+}
+
+static void dwc2_reset_control_assert(void *data)
+{
+	reset_control_assert(data);
+}
+
+static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
+{
+	int i, ret;
+
+	hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2");
+	if (IS_ERR(hsotg->reset))
+		return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->reset),
+				     "error getting reset control\n");
+
+	reset_control_deassert(hsotg->reset);
+	ret = devm_add_action_or_reset(hsotg->dev, dwc2_reset_control_assert,
+				       hsotg->reset);
+	if (ret)
+		return ret;
+
+	hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc");
+	if (IS_ERR(hsotg->reset_ecc))
+		return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->reset_ecc),
+				     "error getting reset control for ecc\n");
+
+	reset_control_deassert(hsotg->reset_ecc);
+	ret = devm_add_action_or_reset(hsotg->dev, dwc2_reset_control_assert,
+				       hsotg->reset_ecc);
+	if (ret)
+		return ret;
+
+	/*
+	 * Attempt to find a generic PHY, then look for an old style
+	 * USB PHY and then fall back to pdata
+	 */
+	hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
+	if (IS_ERR(hsotg->phy)) {
+		ret = PTR_ERR(hsotg->phy);
+		switch (ret) {
+		case -ENODEV:
+		case -ENOSYS:
+			hsotg->phy = NULL;
+			break;
+		default:
+			return dev_err_probe(hsotg->dev, ret, "error getting phy\n");
+		}
+	}
+
+	if (!hsotg->phy) {
+		hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
+		if (IS_ERR(hsotg->uphy)) {
+			ret = PTR_ERR(hsotg->uphy);
+			switch (ret) {
+			case -ENODEV:
+			case -ENXIO:
+				hsotg->uphy = NULL;
+				break;
+			default:
+				return dev_err_probe(hsotg->dev, ret, "error getting usb phy\n");
+			}
+		}
+	}
+
+	hsotg->plat = dev_get_platdata(hsotg->dev);
+
+	/* Clock */
+	hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg");
+	if (IS_ERR(hsotg->clk))
+		return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->clk), "cannot get otg clock\n");
+
+	/* Regulators */
+	for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
+		hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
+
+	ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
+				      hsotg->supplies);
+	if (ret)
+		return dev_err_probe(hsotg->dev, ret, "failed to request supplies\n");
+
+	return 0;
+}
+
+/**
+ * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
+ * DWC_otg driver
+ *
+ * @dev: Platform device
+ *
+ * This routine is called, for example, when the rmmod command is executed. The
+ * device may or may not be electrically present. If it is present, the driver
+ * stops device processing. Any resources used on behalf of this device are
+ * freed.
+ */
+static int dwc2_driver_remove(struct platform_device *dev)
+{
+	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
+	struct dwc2_gregs_backup *gr;
+	int ret = 0;
+
+	gr = &hsotg->gr_backup;
+
+	/* Exit Hibernation when driver is removed. */
+	if (hsotg->hibernated) {
+		if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
+			ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
+		else
+			ret = dwc2_exit_hibernation(hsotg, 0, 0, 0);
+
+		if (ret)
+			dev_err(hsotg->dev,
+				"exit hibernation failed.\n");
+	}
+
+	/* Exit Partial Power Down when driver is removed. */
+	if (hsotg->in_ppd) {
+		ret = dwc2_exit_partial_power_down(hsotg, 0, true);
+		if (ret)
+			dev_err(hsotg->dev,
+				"exit partial_power_down failed\n");
+	}
+
+	/* Exit clock gating when driver is removed. */
+	if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE &&
+	    hsotg->bus_suspended) {
+		if (dwc2_is_device_mode(hsotg))
+			dwc2_gadget_exit_clock_gating(hsotg, 0);
+		else
+			dwc2_host_exit_clock_gating(hsotg, 0);
+	}
+
+	dwc2_debugfs_exit(hsotg);
+	if (hsotg->hcd_enabled)
+		dwc2_hcd_remove(hsotg);
+	if (hsotg->gadget_enabled)
+		dwc2_hsotg_remove(hsotg);
+
+	dwc2_drd_exit(hsotg);
+
+	if (hsotg->params.activate_stm_id_vb_detection)
+		regulator_disable(hsotg->usb33d);
+
+	if (hsotg->ll_hw_enabled)
+		dwc2_lowlevel_hw_disable(hsotg);
+
+	return 0;
+}
+
+/**
+ * dwc2_driver_shutdown() - Called on device shutdown
+ *
+ * @dev: Platform device
+ *
+ * In specific conditions (involving usb hubs) dwc2 devices can create a
+ * lot of interrupts, even to the point of overwhelming devices running
+ * at low frequencies. Some devices need to do special clock handling
+ * at shutdown-time which may bring the system clock below the threshold
+ * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs
+ * prevents reboots/poweroffs from getting stuck in such cases.
+ */
+static void dwc2_driver_shutdown(struct platform_device *dev)
+{
+	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
+
+	dwc2_disable_global_interrupts(hsotg);
+	synchronize_irq(hsotg->irq);
+}
+
+/**
+ * dwc2_check_core_endianness() - Returns true if core and AHB have
+ * opposite endianness.
+ * @hsotg:	Programming view of the DWC_otg controller.
+ */
+static bool dwc2_check_core_endianness(struct dwc2_hsotg *hsotg)
+{
+	u32 snpsid;
+
+	snpsid = ioread32(hsotg->regs + GSNPSID);
+	if ((snpsid & GSNPSID_ID_MASK) == DWC2_OTG_ID ||
+	    (snpsid & GSNPSID_ID_MASK) == DWC2_FS_IOT_ID ||
+	    (snpsid & GSNPSID_ID_MASK) == DWC2_HS_IOT_ID)
+		return false;
+	return true;
+}
+
+/**
+ * dwc2_check_core_version() - Check core version
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ */
+int dwc2_check_core_version(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hw_params *hw = &hsotg->hw_params;
+
+	/*
+	 * Attempt to ensure this device is really a DWC_otg Controller.
+	 * Read and verify the GSNPSID register contents. The value should be
+	 * 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx
+	 */
+
+	hw->snpsid = dwc2_readl(hsotg, GSNPSID);
+	if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID &&
+	    (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID &&
+	    (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) {
+		dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n",
+			hw->snpsid);
+		return -ENODEV;
+	}
+
+	dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n",
+		hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
+		hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
+	return 0;
+}
+
+/**
+ * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
+ * driver
+ *
+ * @dev: Platform device
+ *
+ * This routine creates the driver components required to control the device
+ * (core, HCD, and PCD) and initializes the device. The driver components are
+ * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
+ * in the device private data. This allows the driver to access the dwc2_hsotg
+ * structure on subsequent calls to driver methods for this device.
+ */
+static int dwc2_driver_probe(struct platform_device *dev)
+{
+	struct dwc2_hsotg *hsotg;
+	struct resource *res;
+	int retval;
+
+	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
+	if (!hsotg)
+		return -ENOMEM;
+
+	hsotg->dev = &dev->dev;
+
+	/*
+	 * Use reasonable defaults so platforms don't have to provide these.
+	 */
+	if (!dev->dev.dma_mask)
+		dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
+	retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
+	if (retval) {
+		dev_err(&dev->dev, "can't set coherent DMA mask: %d\n", retval);
+		return retval;
+	}
+
+	hsotg->regs = devm_platform_get_and_ioremap_resource(dev, 0, &res);
+	if (IS_ERR(hsotg->regs))
+		return PTR_ERR(hsotg->regs);
+
+	dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
+		(unsigned long)res->start, hsotg->regs);
+
+	retval = dwc2_lowlevel_hw_init(hsotg);
+	if (retval)
+		return retval;
+
+	spin_lock_init(&hsotg->lock);
+
+	hsotg->irq = platform_get_irq(dev, 0);
+	if (hsotg->irq < 0)
+		return hsotg->irq;
+
+	dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
+		hsotg->irq);
+	retval = devm_request_irq(hsotg->dev, hsotg->irq,
+				  dwc2_handle_common_intr, IRQF_SHARED,
+				  dev_name(hsotg->dev), hsotg);
+	if (retval)
+		return retval;
+
+	hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus");
+	if (IS_ERR(hsotg->vbus_supply)) {
+		retval = PTR_ERR(hsotg->vbus_supply);
+		hsotg->vbus_supply = NULL;
+		if (retval != -ENODEV)
+			return retval;
+	}
+
+	retval = dwc2_lowlevel_hw_enable(hsotg);
+	if (retval)
+		return retval;
+
+	hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
+
+	retval = dwc2_get_dr_mode(hsotg);
+	if (retval)
+		goto error;
+
+	hsotg->need_phy_for_wake =
+		of_property_read_bool(dev->dev.of_node,
+				      "snps,need-phy-for-wake");
+
+	/*
+	 * Before performing any core related operations
+	 * check core version.
+	 */
+	retval = dwc2_check_core_version(hsotg);
+	if (retval)
+		goto error;
+
+	/*
+	 * Reset before dwc2_get_hwparams() then it could get power-on real
+	 * reset value form registers.
+	 */
+	retval = dwc2_core_reset(hsotg, false);
+	if (retval)
+		goto error;
+
+	/* Detect config values from hardware */
+	retval = dwc2_get_hwparams(hsotg);
+	if (retval)
+		goto error;
+
+	/*
+	 * For OTG cores, set the force mode bits to reflect the value
+	 * of dr_mode. Force mode bits should not be touched at any
+	 * other time after this.
+	 */
+	dwc2_force_dr_mode(hsotg);
+
+	retval = dwc2_init_params(hsotg);
+	if (retval)
+		goto error;
+
+	if (hsotg->params.activate_stm_id_vb_detection) {
+		u32 ggpio;
+
+		hsotg->usb33d = devm_regulator_get(hsotg->dev, "usb33d");
+		if (IS_ERR(hsotg->usb33d)) {
+			retval = PTR_ERR(hsotg->usb33d);
+			dev_err_probe(hsotg->dev, retval, "failed to request usb33d supply\n");
+			goto error;
+		}
+		retval = regulator_enable(hsotg->usb33d);
+		if (retval) {
+			dev_err_probe(hsotg->dev, retval, "failed to enable usb33d supply\n");
+			goto error;
+		}
+
+		ggpio = dwc2_readl(hsotg, GGPIO);
+		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
+		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
+		dwc2_writel(hsotg, ggpio, GGPIO);
+
+		/* ID/VBUS detection startup time */
+		usleep_range(5000, 7000);
+	}
+
+	retval = dwc2_drd_init(hsotg);
+	if (retval) {
+		dev_err_probe(hsotg->dev, retval, "failed to initialize dual-role\n");
+		goto error_init;
+	}
+
+	if (hsotg->dr_mode != USB_DR_MODE_HOST) {
+		retval = dwc2_gadget_init(hsotg);
+		if (retval)
+			goto error_drd;
+		hsotg->gadget_enabled = 1;
+	}
+
+	/*
+	 * If we need PHY for wakeup we must be wakeup capable.
+	 * When we have a device that can wake without the PHY we
+	 * can adjust this condition.
+	 */
+	if (hsotg->need_phy_for_wake)
+		device_set_wakeup_capable(&dev->dev, true);
+
+	hsotg->reset_phy_on_wake =
+		of_property_read_bool(dev->dev.of_node,
+				      "snps,reset-phy-on-wake");
+	if (hsotg->reset_phy_on_wake && !hsotg->phy) {
+		dev_warn(hsotg->dev,
+			 "Quirk reset-phy-on-wake only supports generic PHYs\n");
+		hsotg->reset_phy_on_wake = false;
+	}
+
+	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
+		retval = dwc2_hcd_init(hsotg);
+		if (retval) {
+			if (hsotg->gadget_enabled)
+				dwc2_hsotg_remove(hsotg);
+			goto error_drd;
+		}
+		hsotg->hcd_enabled = 1;
+	}
+
+	platform_set_drvdata(dev, hsotg);
+	hsotg->hibernated = 0;
+
+	dwc2_debugfs_init(hsotg);
+
+	/* Gadget code manages lowlevel hw on its own */
+	if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
+		dwc2_lowlevel_hw_disable(hsotg);
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+	/* Postponed adding a new gadget to the udc class driver list */
+	if (hsotg->gadget_enabled) {
+		retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget);
+		if (retval) {
+			hsotg->gadget.udc = NULL;
+			dwc2_hsotg_remove(hsotg);
+			goto error_debugfs;
+		}
+	}
+#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
+	return 0;
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+error_debugfs:
+	dwc2_debugfs_exit(hsotg);
+	if (hsotg->hcd_enabled)
+		dwc2_hcd_remove(hsotg);
+#endif
+error_drd:
+	dwc2_drd_exit(hsotg);
+
+error_init:
+	if (hsotg->params.activate_stm_id_vb_detection)
+		regulator_disable(hsotg->usb33d);
+error:
+	if (hsotg->ll_hw_enabled)
+		dwc2_lowlevel_hw_disable(hsotg);
+	return retval;
+}
+
+static int __maybe_unused dwc2_suspend(struct device *dev)
+{
+	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
+	bool is_device_mode = dwc2_is_device_mode(dwc2);
+	int ret = 0;
+
+	if (is_device_mode)
+		dwc2_hsotg_suspend(dwc2);
+
+	dwc2_drd_suspend(dwc2);
+
+	if (dwc2->params.activate_stm_id_vb_detection) {
+		unsigned long flags;
+		u32 ggpio, gotgctl;
+
+		/*
+		 * Need to force the mode to the current mode to avoid Mode
+		 * Mismatch Interrupt when ID detection will be disabled.
+		 */
+		dwc2_force_mode(dwc2, !is_device_mode);
+
+		spin_lock_irqsave(&dwc2->lock, flags);
+		gotgctl = dwc2_readl(dwc2, GOTGCTL);
+		/* bypass debounce filter, enable overrides */
+		gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS;
+		gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN;
+		/* Force A / B session if needed */
+		if (gotgctl & GOTGCTL_ASESVLD)
+			gotgctl |= GOTGCTL_AVALOVAL;
+		if (gotgctl & GOTGCTL_BSESVLD)
+			gotgctl |= GOTGCTL_BVALOVAL;
+		dwc2_writel(dwc2, gotgctl, GOTGCTL);
+		spin_unlock_irqrestore(&dwc2->lock, flags);
+
+		ggpio = dwc2_readl(dwc2, GGPIO);
+		ggpio &= ~GGPIO_STM32_OTG_GCCFG_IDEN;
+		ggpio &= ~GGPIO_STM32_OTG_GCCFG_VBDEN;
+		dwc2_writel(dwc2, ggpio, GGPIO);
+
+		regulator_disable(dwc2->usb33d);
+	}
+
+	if (dwc2->ll_hw_enabled &&
+	    (is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) {
+		ret = __dwc2_lowlevel_hw_disable(dwc2);
+		dwc2->phy_off_for_suspend = true;
+	}
+
+	return ret;
+}
+
+static int __maybe_unused dwc2_resume(struct device *dev)
+{
+	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) {
+		ret = __dwc2_lowlevel_hw_enable(dwc2);
+		if (ret)
+			return ret;
+	}
+	dwc2->phy_off_for_suspend = false;
+
+	if (dwc2->params.activate_stm_id_vb_detection) {
+		unsigned long flags;
+		u32 ggpio, gotgctl;
+
+		ret = regulator_enable(dwc2->usb33d);
+		if (ret)
+			return ret;
+
+		ggpio = dwc2_readl(dwc2, GGPIO);
+		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
+		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
+		dwc2_writel(dwc2, ggpio, GGPIO);
+
+		/* ID/VBUS detection startup time */
+		usleep_range(5000, 7000);
+
+		spin_lock_irqsave(&dwc2->lock, flags);
+		gotgctl = dwc2_readl(dwc2, GOTGCTL);
+		gotgctl &= ~GOTGCTL_DBNCE_FLTR_BYPASS;
+		gotgctl &= ~(GOTGCTL_BVALOEN | GOTGCTL_AVALOEN |
+			     GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL);
+		dwc2_writel(dwc2, gotgctl, GOTGCTL);
+		spin_unlock_irqrestore(&dwc2->lock, flags);
+	}
+
+	if (!dwc2->role_sw) {
+		/* Need to restore FORCEDEVMODE/FORCEHOSTMODE */
+		dwc2_force_dr_mode(dwc2);
+	} else {
+		dwc2_drd_resume(dwc2);
+	}
+
+	if (dwc2_is_device_mode(dwc2))
+		ret = dwc2_hsotg_resume(dwc2);
+
+	return ret;
+}
+
+static const struct dev_pm_ops dwc2_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
+};
+
+static struct platform_driver dwc2_platform_driver = {
+	.driver = {
+		.name = dwc2_driver_name,
+		.of_match_table = dwc2_of_match_table,
+		.acpi_match_table = ACPI_PTR(dwc2_acpi_match),
+		.pm = &dwc2_dev_pm_ops,
+	},
+	.probe = dwc2_driver_probe,
+	.remove = dwc2_driver_remove,
+	.shutdown = dwc2_driver_shutdown,
+};
+
+module_platform_driver(dwc2_platform_driver);
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
new file mode 100644
index 000000000..864fef540
--- /dev/null
+++ b/drivers/usb/dwc3/Kconfig
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config USB_DWC3
+	tristate "DesignWare USB3 DRD Core Support"
+	depends on (USB || USB_GADGET) && HAS_DMA
+	depends on (EXTCON || EXTCON=n)
+	select USB_XHCI_PLATFORM if USB_XHCI_HCD
+	select USB_ROLE_SWITCH if USB_DWC3_DUAL_ROLE
+	help
+	  Say Y or M here if your system has a Dual Role SuperSpeed
+	  USB controller based on the DesignWare USB3 IP Core.
+
+	  If you choose to build this driver as a dynamically linked
+	  module, the module will be called dwc3.ko.
+
+if USB_DWC3
+
+config USB_DWC3_ULPI
+	bool "Register ULPI PHY Interface"
+	depends on USB_ULPI_BUS=y || USB_ULPI_BUS=USB_DWC3
+	help
+	  Select this if you have ULPI type PHY attached to your DWC3
+	  controller.
+
+choice
+	bool "DWC3 Mode Selection"
+	default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET)
+	default USB_DWC3_HOST if (USB && !USB_GADGET)
+	default USB_DWC3_GADGET if (!USB && USB_GADGET)
+
+config USB_DWC3_HOST
+	bool "Host only mode"
+	depends on USB=y || USB=USB_DWC3
+	help
+	  Select this when you want to use DWC3 in host mode only,
+	  thereby the gadget feature will be regressed.
+
+config USB_DWC3_GADGET
+	bool "Gadget only mode"
+	depends on USB_GADGET=y || USB_GADGET=USB_DWC3
+	help
+	  Select this when you want to use DWC3 in gadget mode only,
+	  thereby the host feature will be regressed.
+
+config USB_DWC3_DUAL_ROLE
+	bool "Dual Role mode"
+	depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
+	help
+	  This is the default mode of working of DWC3 controller where
+	  both host and gadget features are enabled.
+
+endchoice
+
+comment "Platform Glue Driver Support"
+
+config USB_DWC3_OMAP
+	tristate "Texas Instruments OMAP5 and similar Platforms"
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	depends on EXTCON || !EXTCON
+	depends on OF
+	default USB_DWC3
+	help
+	  Some platforms from Texas Instruments like OMAP5, DRA7xxx and
+	  AM437x use this IP for USB2/3 functionality.
+
+	  Say 'Y' or 'M' here if you have one such device
+
+config USB_DWC3_EXYNOS
+	tristate "Samsung Exynos SoC Platform"
+	depends on (ARCH_EXYNOS || COMPILE_TEST) && OF
+	default USB_DWC3
+	help
+	  Recent Samsung Exynos SoCs (Exynos5250, Exynos5410, Exynos542x,
+	  Exynos5800, Exynos5433, Exynos7) ship with one DesignWare Core USB3
+	  IP inside, say 'Y' or 'M' if you have one such device.
+
+config USB_DWC3_PCI
+	tristate "PCIe-based Platforms"
+	depends on USB_PCI && ACPI
+	default USB_DWC3
+	help
+	  If you're using the DesignWare Core IP with a PCIe (but not HAPS
+	  platform), please say 'Y' or 'M' here.
+
+config USB_DWC3_HAPS
+	tristate "Synopsys PCIe-based HAPS Platforms"
+	depends on USB_PCI
+	default USB_DWC3
+	help
+	  If you're using the DesignWare Core IP with a Synopsys PCIe HAPS
+	  platform, please say 'Y' or 'M' here.
+
+config USB_DWC3_KEYSTONE
+	tristate "Texas Instruments Keystone2/AM654 Platforms"
+	depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	default USB_DWC3
+	help
+	  Support of USB2/3 functionality in TI Keystone2 and AM654 platforms.
+	  Say 'Y' or 'M' here if you have one such device
+
+config USB_DWC3_MESON_G12A
+	tristate "Amlogic Meson G12A Platforms"
+	depends on OF && COMMON_CLK
+	depends on ARCH_MESON || COMPILE_TEST
+	default USB_DWC3
+	select USB_ROLE_SWITCH
+	select REGMAP_MMIO
+	help
+	  Support USB2/3 functionality in Amlogic G12A platforms.
+	  Say 'Y' or 'M' if you have one such device.
+
+config USB_DWC3_OF_SIMPLE
+	tristate "Generic OF Simple Glue Layer"
+	depends on OF && COMMON_CLK
+	default USB_DWC3
+	help
+	  Support USB2/3 functionality in simple SoC integrations.
+	  Currently supports Xilinx and Qualcomm DWC USB3 IP.
+	  Say 'Y' or 'M' if you have one such device.
+
+config USB_DWC3_ST
+	tristate "STMicroelectronics Platforms"
+	depends on (ARCH_STI || COMPILE_TEST) && OF
+	default USB_DWC3
+	help
+	  STMicroelectronics SoCs with one DesignWare Core USB3 IP
+	  inside (i.e. STiH407).
+	  Say 'Y' or 'M' if you have one such device.
+
+config USB_DWC3_QCOM
+	tristate "Qualcomm Platform"
+	depends on ARCH_QCOM || COMPILE_TEST
+	depends on EXTCON || !EXTCON
+	depends on (OF || ACPI)
+	default USB_DWC3
+	help
+	  Some Qualcomm SoCs use DesignWare Core IP for USB2/3
+	  functionality.
+	  This driver also handles Qscratch wrapper which is needed
+	  for peripheral mode support.
+	  Say 'Y' or 'M' if you have one such device.
+
+config USB_DWC3_IMX8MP
+	tristate "NXP iMX8MP Platform"
+	depends on OF && COMMON_CLK
+	depends on (ARCH_MXC && ARM64) || COMPILE_TEST
+	default USB_DWC3
+	help
+	  NXP iMX8M Plus SoC use DesignWare Core IP for USB2/3
+	  functionality.
+	  Say 'Y' or 'M' if you have one such device.
+
+config USB_DWC3_XILINX
+	tristate "Xilinx Platforms"
+	depends on (ARCH_ZYNQMP || ARCH_VERSAL) && OF
+	default USB_DWC3
+	help
+	  Support Xilinx SoCs with DesignWare Core USB3 IP.
+	  This driver handles both ZynqMP and Versal SoC operations.
+	  Say 'Y' or 'M' if you have one such device.
+
+config USB_DWC3_AM62
+	tristate "Texas Instruments AM62 Platforms"
+	depends on ARCH_K3 || COMPILE_TEST
+	default USB_DWC3
+	help
+	  Support TI's AM62 platforms with DesignWare Core USB3 IP.
+	  The Designware Core USB3 IP is programmed to operate in
+	  in USB 2.0 mode only.
+	  Say 'Y' or 'M' here if you have one such device
+endif
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
new file mode 100644
index 000000000..9f66bd82b
--- /dev/null
+++ b/drivers/usb/dwc3/Makefile
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+# define_trace.h needs to know how to find our header
+CFLAGS_trace.o				:= -I$(src)
+
+obj-$(CONFIG_USB_DWC3)			+= dwc3.o
+
+dwc3-y					:= core.o
+
+ifneq ($(CONFIG_TRACING),)
+	dwc3-y				+= trace.o
+endif
+
+ifneq ($(filter y,$(CONFIG_USB_DWC3_HOST) $(CONFIG_USB_DWC3_DUAL_ROLE)),)
+	dwc3-y				+= host.o
+endif
+
+ifneq ($(filter y,$(CONFIG_USB_DWC3_GADGET) $(CONFIG_USB_DWC3_DUAL_ROLE)),)
+	dwc3-y				+= gadget.o ep0.o
+endif
+
+ifneq ($(CONFIG_USB_DWC3_DUAL_ROLE),)
+	dwc3-y				+= drd.o
+endif
+
+ifneq ($(CONFIG_USB_DWC3_ULPI),)
+	dwc3-y				+= ulpi.o
+endif
+
+ifneq ($(CONFIG_DEBUG_FS),)
+	dwc3-y				+= debugfs.o
+endif
+
+##
+# Platform-specific glue layers go here
+#
+# NOTICE: Make sure your glue layer doesn't depend on anything
+# which is arch-specific and that it compiles on all situations.
+#
+# We want to keep this requirement in order to be able to compile
+# the entire driver (with all its glue layers) on several architectures
+# and make sure it compiles fine. This will also help with allmodconfig
+# and allyesconfig builds.
+##
+
+obj-$(CONFIG_USB_DWC3_AM62)		+= dwc3-am62.o
+obj-$(CONFIG_USB_DWC3_OMAP)		+= dwc3-omap.o
+obj-$(CONFIG_USB_DWC3_EXYNOS)		+= dwc3-exynos.o
+obj-$(CONFIG_USB_DWC3_PCI)		+= dwc3-pci.o
+obj-$(CONFIG_USB_DWC3_HAPS)		+= dwc3-haps.o
+obj-$(CONFIG_USB_DWC3_KEYSTONE)		+= dwc3-keystone.o
+obj-$(CONFIG_USB_DWC3_MESON_G12A)	+= dwc3-meson-g12a.o
+obj-$(CONFIG_USB_DWC3_OF_SIMPLE)	+= dwc3-of-simple.o
+obj-$(CONFIG_USB_DWC3_ST)		+= dwc3-st.o
+obj-$(CONFIG_USB_DWC3_QCOM)		+= dwc3-qcom.o
+obj-$(CONFIG_USB_DWC3_IMX8MP)		+= dwc3-imx8mp.o
+obj-$(CONFIG_USB_DWC3_XILINX)		+= dwc3-xilinx.o
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
new file mode 100644
index 000000000..011a3909f
--- /dev/null
+++ b/drivers/usb/dwc3/core.c
@@ -0,0 +1,2397 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * core.c - DesignWare USB3 DRD Controller Core file
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ */
+
+#include <linux/clk.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/acpi.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/reset.h>
+#include <linux/bitfield.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+
+#include "core.h"
+#include "gadget.h"
+#include "io.h"
+
+#include "debug.h"
+
+#define DWC3_DEFAULT_AUTOSUSPEND_DELAY	5000 /* ms */
+
+/**
+ * dwc3_get_dr_mode - Validates and sets dr_mode
+ * @dwc: pointer to our context structure
+ */
+static int dwc3_get_dr_mode(struct dwc3 *dwc)
+{
+	enum usb_dr_mode mode;
+	struct device *dev = dwc->dev;
+	unsigned int hw_mode;
+
+	if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
+		dwc->dr_mode = USB_DR_MODE_OTG;
+
+	mode = dwc->dr_mode;
+	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+
+	switch (hw_mode) {
+	case DWC3_GHWPARAMS0_MODE_GADGET:
+		if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) {
+			dev_err(dev,
+				"Controller does not support host mode.\n");
+			return -EINVAL;
+		}
+		mode = USB_DR_MODE_PERIPHERAL;
+		break;
+	case DWC3_GHWPARAMS0_MODE_HOST:
+		if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) {
+			dev_err(dev,
+				"Controller does not support device mode.\n");
+			return -EINVAL;
+		}
+		mode = USB_DR_MODE_HOST;
+		break;
+	default:
+		if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
+			mode = USB_DR_MODE_HOST;
+		else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
+			mode = USB_DR_MODE_PERIPHERAL;
+
+		/*
+		 * DWC_usb31 and DWC_usb3 v3.30a and higher do not support OTG
+		 * mode. If the controller supports DRD but the dr_mode is not
+		 * specified or set to OTG, then set the mode to peripheral.
+		 */
+		if (mode == USB_DR_MODE_OTG && !dwc->edev &&
+		    (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
+		     !device_property_read_bool(dwc->dev, "usb-role-switch")) &&
+		    !DWC3_VER_IS_PRIOR(DWC3, 330A))
+			mode = USB_DR_MODE_PERIPHERAL;
+	}
+
+	if (mode != dwc->dr_mode) {
+		dev_warn(dev,
+			 "Configuration mismatch. dr_mode forced to %s\n",
+			 mode == USB_DR_MODE_HOST ? "host" : "gadget");
+
+		dwc->dr_mode = mode;
+	}
+
+	return 0;
+}
+
+void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
+{
+	u32 reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
+	reg |= DWC3_GCTL_PRTCAPDIR(mode);
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+	dwc->current_dr_role = mode;
+}
+
+static void __dwc3_set_mode(struct work_struct *work)
+{
+	struct dwc3 *dwc = work_to_dwc(work);
+	unsigned long flags;
+	int ret;
+	u32 reg;
+	u32 desired_dr_role;
+
+	mutex_lock(&dwc->mutex);
+	spin_lock_irqsave(&dwc->lock, flags);
+	desired_dr_role = dwc->desired_dr_role;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	pm_runtime_get_sync(dwc->dev);
+
+	if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_OTG)
+		dwc3_otg_update(dwc, 0);
+
+	if (!desired_dr_role)
+		goto out;
+
+	if (desired_dr_role == dwc->current_dr_role)
+		goto out;
+
+	if (desired_dr_role == DWC3_GCTL_PRTCAP_OTG && dwc->edev)
+		goto out;
+
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_HOST:
+		dwc3_host_exit(dwc);
+		break;
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		dwc3_gadget_exit(dwc);
+		dwc3_event_buffers_cleanup(dwc);
+		break;
+	case DWC3_GCTL_PRTCAP_OTG:
+		dwc3_otg_exit(dwc);
+		spin_lock_irqsave(&dwc->lock, flags);
+		dwc->desired_otg_role = DWC3_OTG_ROLE_IDLE;
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		dwc3_otg_update(dwc, 1);
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * When current_dr_role is not set, there's no role switching.
+	 * Only perform GCTL.CoreSoftReset when there's DRD role switching.
+	 */
+	if (dwc->current_dr_role && ((DWC3_IP_IS(DWC3) ||
+			DWC3_VER_IS_PRIOR(DWC31, 190A)) &&
+			desired_dr_role != DWC3_GCTL_PRTCAP_OTG)) {
+		reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+		reg |= DWC3_GCTL_CORESOFTRESET;
+		dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+		/*
+		 * Wait for internal clocks to synchronized. DWC_usb31 and
+		 * DWC_usb32 may need at least 50ms (less for DWC_usb3). To
+		 * keep it consistent across different IPs, let's wait up to
+		 * 100ms before clearing GCTL.CORESOFTRESET.
+		 */
+		msleep(100);
+
+		reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+		reg &= ~DWC3_GCTL_CORESOFTRESET;
+		dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+	}
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	dwc3_set_prtcap(dwc, desired_dr_role);
+
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	switch (desired_dr_role) {
+	case DWC3_GCTL_PRTCAP_HOST:
+		ret = dwc3_host_init(dwc);
+		if (ret) {
+			dev_err(dwc->dev, "failed to initialize host\n");
+		} else {
+			if (dwc->usb2_phy)
+				otg_set_vbus(dwc->usb2_phy->otg, true);
+			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
+			phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
+			if (dwc->dis_split_quirk) {
+				reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+				reg |= DWC3_GUCTL3_SPLITDISABLE;
+				dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+			}
+		}
+		break;
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		dwc3_core_soft_reset(dwc);
+
+		dwc3_event_buffers_setup(dwc);
+
+		if (dwc->usb2_phy)
+			otg_set_vbus(dwc->usb2_phy->otg, false);
+		phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
+		phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
+
+		ret = dwc3_gadget_init(dwc);
+		if (ret)
+			dev_err(dwc->dev, "failed to initialize peripheral\n");
+		break;
+	case DWC3_GCTL_PRTCAP_OTG:
+		dwc3_otg_init(dwc);
+		dwc3_otg_update(dwc, 0);
+		break;
+	default:
+		break;
+	}
+
+out:
+	pm_runtime_mark_last_busy(dwc->dev);
+	pm_runtime_put_autosuspend(dwc->dev);
+	mutex_unlock(&dwc->mutex);
+}
+
+void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
+{
+	unsigned long flags;
+
+	if (dwc->dr_mode != USB_DR_MODE_OTG)
+		return;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc->desired_dr_role = mode;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	queue_work(system_freezable_wq, &dwc->drd_work);
+}
+
+u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type)
+{
+	struct dwc3		*dwc = dep->dwc;
+	u32			reg;
+
+	dwc3_writel(dwc->regs, DWC3_GDBGFIFOSPACE,
+			DWC3_GDBGFIFOSPACE_NUM(dep->number) |
+			DWC3_GDBGFIFOSPACE_TYPE(type));
+
+	reg = dwc3_readl(dwc->regs, DWC3_GDBGFIFOSPACE);
+
+	return DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(reg);
+}
+
+/**
+ * dwc3_core_soft_reset - Issues core soft reset and PHY reset
+ * @dwc: pointer to our context structure
+ */
+int dwc3_core_soft_reset(struct dwc3 *dwc)
+{
+	u32		reg;
+	int		retries = 1000;
+
+	/*
+	 * We're resetting only the device side because, if we're in host mode,
+	 * XHCI driver will reset the host block. If dwc3 was configured for
+	 * host-only mode, then we can return early.
+	 */
+	if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
+		return 0;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	reg |= DWC3_DCTL_CSFTRST;
+	reg &= ~DWC3_DCTL_RUN_STOP;
+	dwc3_gadget_dctl_write_safe(dwc, reg);
+
+	/*
+	 * For DWC_usb31 controller 1.90a and later, the DCTL.CSFRST bit
+	 * is cleared only after all the clocks are synchronized. This can
+	 * take a little more than 50ms. Set the polling rate at 20ms
+	 * for 10 times instead.
+	 */
+	if (DWC3_VER_IS_WITHIN(DWC31, 190A, ANY) || DWC3_IP_IS(DWC32))
+		retries = 10;
+
+	do {
+		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+		if (!(reg & DWC3_DCTL_CSFTRST))
+			goto done;
+
+		if (DWC3_VER_IS_WITHIN(DWC31, 190A, ANY) || DWC3_IP_IS(DWC32))
+			msleep(20);
+		else
+			udelay(1);
+	} while (--retries);
+
+	dev_warn(dwc->dev, "DWC3 controller soft reset failed.\n");
+	return -ETIMEDOUT;
+
+done:
+	/*
+	 * For DWC_usb31 controller 1.80a and prior, once DCTL.CSFRST bit
+	 * is cleared, we must wait at least 50ms before accessing the PHY
+	 * domain (synchronization delay).
+	 */
+	if (DWC3_VER_IS_WITHIN(DWC31, ANY, 180A))
+		msleep(50);
+
+	return 0;
+}
+
+/*
+ * dwc3_frame_length_adjustment - Adjusts frame length if required
+ * @dwc3: Pointer to our controller context structure
+ */
+static void dwc3_frame_length_adjustment(struct dwc3 *dwc)
+{
+	u32 reg;
+	u32 dft;
+
+	if (DWC3_VER_IS_PRIOR(DWC3, 250A))
+		return;
+
+	if (dwc->fladj == 0)
+		return;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GFLADJ);
+	dft = reg & DWC3_GFLADJ_30MHZ_MASK;
+	if (dft != dwc->fladj) {
+		reg &= ~DWC3_GFLADJ_30MHZ_MASK;
+		reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | dwc->fladj;
+		dwc3_writel(dwc->regs, DWC3_GFLADJ, reg);
+	}
+}
+
+/**
+ * dwc3_ref_clk_period - Reference clock period configuration
+ *		Default reference clock period depends on hardware
+ *		configuration. For systems with reference clock that differs
+ *		from the default, this will set clock period in DWC3_GUCTL
+ *		register.
+ * @dwc: Pointer to our controller context structure
+ */
+static void dwc3_ref_clk_period(struct dwc3 *dwc)
+{
+	unsigned long period;
+	unsigned long fladj;
+	unsigned long decr;
+	unsigned long rate;
+	u32 reg;
+
+	if (dwc->ref_clk) {
+		rate = clk_get_rate(dwc->ref_clk);
+		if (!rate)
+			return;
+		period = NSEC_PER_SEC / rate;
+	} else if (dwc->ref_clk_per) {
+		period = dwc->ref_clk_per;
+		rate = NSEC_PER_SEC / period;
+	} else {
+		return;
+	}
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUCTL);
+	reg &= ~DWC3_GUCTL_REFCLKPER_MASK;
+	reg |=  FIELD_PREP(DWC3_GUCTL_REFCLKPER_MASK, period);
+	dwc3_writel(dwc->regs, DWC3_GUCTL, reg);
+
+	if (DWC3_VER_IS_PRIOR(DWC3, 250A))
+		return;
+
+	/*
+	 * The calculation below is
+	 *
+	 * 125000 * (NSEC_PER_SEC / (rate * period) - 1)
+	 *
+	 * but rearranged for fixed-point arithmetic. The division must be
+	 * 64-bit because 125000 * NSEC_PER_SEC doesn't fit in 32 bits (and
+	 * neither does rate * period).
+	 *
+	 * Note that rate * period ~= NSEC_PER_SECOND, minus the number of
+	 * nanoseconds of error caused by the truncation which happened during
+	 * the division when calculating rate or period (whichever one was
+	 * derived from the other). We first calculate the relative error, then
+	 * scale it to units of 8 ppm.
+	 */
+	fladj = div64_u64(125000ULL * NSEC_PER_SEC, (u64)rate * period);
+	fladj -= 125000;
+
+	/*
+	 * The documented 240MHz constant is scaled by 2 to get PLS1 as well.
+	 */
+	decr = 480000000 / rate;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GFLADJ);
+	reg &= ~DWC3_GFLADJ_REFCLK_FLADJ_MASK
+	    &  ~DWC3_GFLADJ_240MHZDECR
+	    &  ~DWC3_GFLADJ_240MHZDECR_PLS1;
+	reg |= FIELD_PREP(DWC3_GFLADJ_REFCLK_FLADJ_MASK, fladj)
+	    |  FIELD_PREP(DWC3_GFLADJ_240MHZDECR, decr >> 1)
+	    |  FIELD_PREP(DWC3_GFLADJ_240MHZDECR_PLS1, decr & 1);
+
+	if (dwc->gfladj_refclk_lpm_sel)
+		reg |=  DWC3_GFLADJ_REFCLK_LPM_SEL;
+
+	dwc3_writel(dwc->regs, DWC3_GFLADJ, reg);
+}
+
+/**
+ * dwc3_free_one_event_buffer - Frees one event buffer
+ * @dwc: Pointer to our controller context structure
+ * @evt: Pointer to event buffer to be freed
+ */
+static void dwc3_free_one_event_buffer(struct dwc3 *dwc,
+		struct dwc3_event_buffer *evt)
+{
+	dma_free_coherent(dwc->sysdev, evt->length, evt->buf, evt->dma);
+}
+
+/**
+ * dwc3_alloc_one_event_buffer - Allocates one event buffer structure
+ * @dwc: Pointer to our controller context structure
+ * @length: size of the event buffer
+ *
+ * Returns a pointer to the allocated event buffer structure on success
+ * otherwise ERR_PTR(errno).
+ */
+static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc,
+		unsigned int length)
+{
+	struct dwc3_event_buffer	*evt;
+
+	evt = devm_kzalloc(dwc->dev, sizeof(*evt), GFP_KERNEL);
+	if (!evt)
+		return ERR_PTR(-ENOMEM);
+
+	evt->dwc	= dwc;
+	evt->length	= length;
+	evt->cache	= devm_kzalloc(dwc->dev, length, GFP_KERNEL);
+	if (!evt->cache)
+		return ERR_PTR(-ENOMEM);
+
+	evt->buf	= dma_alloc_coherent(dwc->sysdev, length,
+			&evt->dma, GFP_KERNEL);
+	if (!evt->buf)
+		return ERR_PTR(-ENOMEM);
+
+	return evt;
+}
+
+/**
+ * dwc3_free_event_buffers - frees all allocated event buffers
+ * @dwc: Pointer to our controller context structure
+ */
+static void dwc3_free_event_buffers(struct dwc3 *dwc)
+{
+	struct dwc3_event_buffer	*evt;
+
+	evt = dwc->ev_buf;
+	if (evt)
+		dwc3_free_one_event_buffer(dwc, evt);
+}
+
+/**
+ * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length
+ * @dwc: pointer to our controller context structure
+ * @length: size of event buffer
+ *
+ * Returns 0 on success otherwise negative errno. In the error case, dwc
+ * may contain some buffers allocated but not all which were requested.
+ */
+static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned int length)
+{
+	struct dwc3_event_buffer *evt;
+
+	evt = dwc3_alloc_one_event_buffer(dwc, length);
+	if (IS_ERR(evt)) {
+		dev_err(dwc->dev, "can't allocate event buffer\n");
+		return PTR_ERR(evt);
+	}
+	dwc->ev_buf = evt;
+
+	return 0;
+}
+
+/**
+ * dwc3_event_buffers_setup - setup our allocated event buffers
+ * @dwc: pointer to our controller context structure
+ *
+ * Returns 0 on success otherwise negative errno.
+ */
+int dwc3_event_buffers_setup(struct dwc3 *dwc)
+{
+	struct dwc3_event_buffer	*evt;
+
+	evt = dwc->ev_buf;
+	evt->lpos = 0;
+	dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0),
+			lower_32_bits(evt->dma));
+	dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0),
+			upper_32_bits(evt->dma));
+	dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0),
+			DWC3_GEVNTSIZ_SIZE(evt->length));
+	dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0);
+
+	return 0;
+}
+
+void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
+{
+	struct dwc3_event_buffer	*evt;
+
+	evt = dwc->ev_buf;
+
+	evt->lpos = 0;
+
+	dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0), 0);
+	dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0), 0);
+	dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), DWC3_GEVNTSIZ_INTMASK
+			| DWC3_GEVNTSIZ_SIZE(0));
+	dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0);
+}
+
+static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc)
+{
+	if (!dwc->has_hibernation)
+		return 0;
+
+	if (!dwc->nr_scratch)
+		return 0;
+
+	dwc->scratchbuf = kmalloc_array(dwc->nr_scratch,
+			DWC3_SCRATCHBUF_SIZE, GFP_KERNEL);
+	if (!dwc->scratchbuf)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int dwc3_setup_scratch_buffers(struct dwc3 *dwc)
+{
+	dma_addr_t scratch_addr;
+	u32 param;
+	int ret;
+
+	if (!dwc->has_hibernation)
+		return 0;
+
+	if (!dwc->nr_scratch)
+		return 0;
+
+	 /* should never fall here */
+	if (!WARN_ON(dwc->scratchbuf))
+		return 0;
+
+	scratch_addr = dma_map_single(dwc->sysdev, dwc->scratchbuf,
+			dwc->nr_scratch * DWC3_SCRATCHBUF_SIZE,
+			DMA_BIDIRECTIONAL);
+	if (dma_mapping_error(dwc->sysdev, scratch_addr)) {
+		dev_err(dwc->sysdev, "failed to map scratch buffer\n");
+		ret = -EFAULT;
+		goto err0;
+	}
+
+	dwc->scratch_addr = scratch_addr;
+
+	param = lower_32_bits(scratch_addr);
+
+	ret = dwc3_send_gadget_generic_command(dwc,
+			DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO, param);
+	if (ret < 0)
+		goto err1;
+
+	param = upper_32_bits(scratch_addr);
+
+	ret = dwc3_send_gadget_generic_command(dwc,
+			DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI, param);
+	if (ret < 0)
+		goto err1;
+
+	return 0;
+
+err1:
+	dma_unmap_single(dwc->sysdev, dwc->scratch_addr, dwc->nr_scratch *
+			DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL);
+
+err0:
+	return ret;
+}
+
+static void dwc3_free_scratch_buffers(struct dwc3 *dwc)
+{
+	if (!dwc->has_hibernation)
+		return;
+
+	if (!dwc->nr_scratch)
+		return;
+
+	 /* should never fall here */
+	if (!WARN_ON(dwc->scratchbuf))
+		return;
+
+	dma_unmap_single(dwc->sysdev, dwc->scratch_addr, dwc->nr_scratch *
+			DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL);
+	kfree(dwc->scratchbuf);
+}
+
+static void dwc3_core_num_eps(struct dwc3 *dwc)
+{
+	struct dwc3_hwparams	*parms = &dwc->hwparams;
+
+	dwc->num_eps = DWC3_NUM_EPS(parms);
+}
+
+static void dwc3_cache_hwparams(struct dwc3 *dwc)
+{
+	struct dwc3_hwparams	*parms = &dwc->hwparams;
+
+	parms->hwparams0 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS0);
+	parms->hwparams1 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS1);
+	parms->hwparams2 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS2);
+	parms->hwparams3 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS3);
+	parms->hwparams4 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS4);
+	parms->hwparams5 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS5);
+	parms->hwparams6 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS6);
+	parms->hwparams7 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS7);
+	parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8);
+
+	if (DWC3_IP_IS(DWC32))
+		parms->hwparams9 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS9);
+}
+
+static int dwc3_core_ulpi_init(struct dwc3 *dwc)
+{
+	int intf;
+	int ret = 0;
+
+	intf = DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3);
+
+	if (intf == DWC3_GHWPARAMS3_HSPHY_IFC_ULPI ||
+	    (intf == DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI &&
+	     dwc->hsphy_interface &&
+	     !strncmp(dwc->hsphy_interface, "ulpi", 4)))
+		ret = dwc3_ulpi_init(dwc);
+
+	return ret;
+}
+
+/**
+ * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
+ * @dwc: Pointer to our controller context structure
+ *
+ * Returns 0 on success. The USB PHY interfaces are configured but not
+ * initialized. The PHY interfaces and the PHYs get initialized together with
+ * the core in dwc3_core_init.
+ */
+static int dwc3_phy_setup(struct dwc3 *dwc)
+{
+	unsigned int hw_mode;
+	u32 reg;
+
+	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+
+	/*
+	 * Make sure UX_EXIT_PX is cleared as that causes issues with some
+	 * PHYs. Also, this bit is not supposed to be used in normal operation.
+	 */
+	reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX;
+
+	/*
+	 * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY
+	 * to '0' during coreConsultant configuration. So default value
+	 * will be '0' when the core is reset. Application needs to set it
+	 * to '1' after the core initialization is completed.
+	 */
+	if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A))
+		reg |= DWC3_GUSB3PIPECTL_SUSPHY;
+
+	/*
+	 * For DRD controllers, GUSB3PIPECTL.SUSPENDENABLE must be cleared after
+	 * power-on reset, and it can be set after core initialization, which is
+	 * after device soft-reset during initialization.
+	 */
+	if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD)
+		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
+
+	if (dwc->u2ss_inp3_quirk)
+		reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK;
+
+	if (dwc->dis_rxdet_inp3_quirk)
+		reg |= DWC3_GUSB3PIPECTL_DISRXDETINP3;
+
+	if (dwc->req_p1p2p3_quirk)
+		reg |= DWC3_GUSB3PIPECTL_REQP1P2P3;
+
+	if (dwc->del_p1p2p3_quirk)
+		reg |= DWC3_GUSB3PIPECTL_DEP1P2P3_EN;
+
+	if (dwc->del_phy_power_chg_quirk)
+		reg |= DWC3_GUSB3PIPECTL_DEPOCHANGE;
+
+	if (dwc->lfps_filter_quirk)
+		reg |= DWC3_GUSB3PIPECTL_LFPSFILT;
+
+	if (dwc->rx_detect_poll_quirk)
+		reg |= DWC3_GUSB3PIPECTL_RX_DETOPOLL;
+
+	if (dwc->tx_de_emphasis_quirk)
+		reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis);
+
+	if (dwc->dis_u3_susphy_quirk)
+		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
+
+	if (dwc->dis_del_phy_power_chg_quirk)
+		reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
+
+	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+
+	/* Select the HS PHY interface */
+	switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
+	case DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI:
+		if (dwc->hsphy_interface &&
+				!strncmp(dwc->hsphy_interface, "utmi", 4)) {
+			reg &= ~DWC3_GUSB2PHYCFG_ULPI_UTMI;
+			break;
+		} else if (dwc->hsphy_interface &&
+				!strncmp(dwc->hsphy_interface, "ulpi", 4)) {
+			reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
+			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+		} else {
+			/* Relying on default value. */
+			if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI))
+				break;
+		}
+		fallthrough;
+	case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI:
+	default:
+		break;
+	}
+
+	switch (dwc->hsphy_mode) {
+	case USBPHY_INTERFACE_MODE_UTMI:
+		reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK |
+		       DWC3_GUSB2PHYCFG_USBTRDTIM_MASK);
+		reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) |
+		       DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT);
+		break;
+	case USBPHY_INTERFACE_MODE_UTMIW:
+		reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK |
+		       DWC3_GUSB2PHYCFG_USBTRDTIM_MASK);
+		reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_16_BIT) |
+		       DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_16_BIT);
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
+	 * '0' during coreConsultant configuration. So default value will
+	 * be '0' when the core is reset. Application needs to set it to
+	 * '1' after the core initialization is completed.
+	 */
+	if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A))
+		reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+
+	/*
+	 * For DRD controllers, GUSB2PHYCFG.SUSPHY must be cleared after
+	 * power-on reset, and it can be set after core initialization, which is
+	 * after device soft-reset during initialization.
+	 */
+	if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD)
+		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+
+	if (dwc->dis_u2_susphy_quirk)
+		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+
+	if (dwc->dis_enblslpm_quirk)
+		reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
+	else
+		reg |= DWC3_GUSB2PHYCFG_ENBLSLPM;
+
+	if (dwc->dis_u2_freeclk_exists_quirk || dwc->gfladj_refclk_lpm_sel)
+		reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;
+
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+
+	return 0;
+}
+
+static int dwc3_clk_enable(struct dwc3 *dwc)
+{
+	int ret;
+
+	ret = clk_prepare_enable(dwc->bus_clk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(dwc->ref_clk);
+	if (ret)
+		goto disable_bus_clk;
+
+	ret = clk_prepare_enable(dwc->susp_clk);
+	if (ret)
+		goto disable_ref_clk;
+
+	return 0;
+
+disable_ref_clk:
+	clk_disable_unprepare(dwc->ref_clk);
+disable_bus_clk:
+	clk_disable_unprepare(dwc->bus_clk);
+	return ret;
+}
+
+static void dwc3_clk_disable(struct dwc3 *dwc)
+{
+	clk_disable_unprepare(dwc->susp_clk);
+	clk_disable_unprepare(dwc->ref_clk);
+	clk_disable_unprepare(dwc->bus_clk);
+}
+
+static void dwc3_core_exit(struct dwc3 *dwc)
+{
+	dwc3_event_buffers_cleanup(dwc);
+
+	usb_phy_set_suspend(dwc->usb2_phy, 1);
+	usb_phy_set_suspend(dwc->usb3_phy, 1);
+	phy_power_off(dwc->usb2_generic_phy);
+	phy_power_off(dwc->usb3_generic_phy);
+
+	usb_phy_shutdown(dwc->usb2_phy);
+	usb_phy_shutdown(dwc->usb3_phy);
+	phy_exit(dwc->usb2_generic_phy);
+	phy_exit(dwc->usb3_generic_phy);
+
+	dwc3_clk_disable(dwc);
+	reset_control_assert(dwc->reset);
+}
+
+static bool dwc3_core_is_valid(struct dwc3 *dwc)
+{
+	u32 reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
+	dwc->ip = DWC3_GSNPS_ID(reg);
+
+	/* This should read as U3 followed by revision number */
+	if (DWC3_IP_IS(DWC3)) {
+		dwc->revision = reg;
+	} else if (DWC3_IP_IS(DWC31) || DWC3_IP_IS(DWC32)) {
+		dwc->revision = dwc3_readl(dwc->regs, DWC3_VER_NUMBER);
+		dwc->version_type = dwc3_readl(dwc->regs, DWC3_VER_TYPE);
+	} else {
+		return false;
+	}
+
+	return true;
+}
+
+static void dwc3_core_setup_global_control(struct dwc3 *dwc)
+{
+	u32 hwparams4 = dwc->hwparams.hwparams4;
+	u32 reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
+
+	switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {
+	case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
+		/**
+		 * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an
+		 * issue which would cause xHCI compliance tests to fail.
+		 *
+		 * Because of that we cannot enable clock gating on such
+		 * configurations.
+		 *
+		 * Refers to:
+		 *
+		 * STAR#9000588375: Clock Gating, SOF Issues when ref_clk-Based
+		 * SOF/ITP Mode Used
+		 */
+		if ((dwc->dr_mode == USB_DR_MODE_HOST ||
+				dwc->dr_mode == USB_DR_MODE_OTG) &&
+				DWC3_VER_IS_WITHIN(DWC3, 210A, 250A))
+			reg |= DWC3_GCTL_DSBLCLKGTNG | DWC3_GCTL_SOFITPSYNC;
+		else
+			reg &= ~DWC3_GCTL_DSBLCLKGTNG;
+		break;
+	case DWC3_GHWPARAMS1_EN_PWROPT_HIB:
+		/* enable hibernation here */
+		dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4);
+
+		/*
+		 * REVISIT Enabling this bit so that host-mode hibernation
+		 * will work. Device-mode hibernation is not yet implemented.
+		 */
+		reg |= DWC3_GCTL_GBLHIBERNATIONEN;
+		break;
+	default:
+		/* nothing */
+		break;
+	}
+
+	/* check if current dwc3 is on simulation board */
+	if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) {
+		dev_info(dwc->dev, "Running with FPGA optimizations\n");
+		dwc->is_fpga = true;
+	}
+
+	WARN_ONCE(dwc->disable_scramble_quirk && !dwc->is_fpga,
+			"disable_scramble cannot be used on non-FPGA builds\n");
+
+	if (dwc->disable_scramble_quirk && dwc->is_fpga)
+		reg |= DWC3_GCTL_DISSCRAMBLE;
+	else
+		reg &= ~DWC3_GCTL_DISSCRAMBLE;
+
+	if (dwc->u2exit_lfps_quirk)
+		reg |= DWC3_GCTL_U2EXIT_LFPS;
+
+	/*
+	 * WORKAROUND: DWC3 revisions <1.90a have a bug
+	 * where the device can fail to connect at SuperSpeed
+	 * and falls back to high-speed mode which causes
+	 * the device to enter a Connect/Disconnect loop
+	 */
+	if (DWC3_VER_IS_PRIOR(DWC3, 190A))
+		reg |= DWC3_GCTL_U2RSTECN;
+
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+}
+
+static int dwc3_core_get_phy(struct dwc3 *dwc);
+static int dwc3_core_ulpi_init(struct dwc3 *dwc);
+
+/* set global incr burst type configuration registers */
+static void dwc3_set_incr_burst_type(struct dwc3 *dwc)
+{
+	struct device *dev = dwc->dev;
+	/* incrx_mode : for INCR burst type. */
+	bool incrx_mode;
+	/* incrx_size : for size of INCRX burst. */
+	u32 incrx_size;
+	u32 *vals;
+	u32 cfg;
+	int ntype;
+	int ret;
+	int i;
+
+	cfg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0);
+
+	/*
+	 * Handle property "snps,incr-burst-type-adjustment".
+	 * Get the number of value from this property:
+	 * result <= 0, means this property is not supported.
+	 * result = 1, means INCRx burst mode supported.
+	 * result > 1, means undefined length burst mode supported.
+	 */
+	ntype = device_property_count_u32(dev, "snps,incr-burst-type-adjustment");
+	if (ntype <= 0)
+		return;
+
+	vals = kcalloc(ntype, sizeof(u32), GFP_KERNEL);
+	if (!vals)
+		return;
+
+	/* Get INCR burst type, and parse it */
+	ret = device_property_read_u32_array(dev,
+			"snps,incr-burst-type-adjustment", vals, ntype);
+	if (ret) {
+		kfree(vals);
+		dev_err(dev, "Error to get property\n");
+		return;
+	}
+
+	incrx_size = *vals;
+
+	if (ntype > 1) {
+		/* INCRX (undefined length) burst mode */
+		incrx_mode = INCRX_UNDEF_LENGTH_BURST_MODE;
+		for (i = 1; i < ntype; i++) {
+			if (vals[i] > incrx_size)
+				incrx_size = vals[i];
+		}
+	} else {
+		/* INCRX burst mode */
+		incrx_mode = INCRX_BURST_MODE;
+	}
+
+	kfree(vals);
+
+	/* Enable Undefined Length INCR Burst and Enable INCRx Burst */
+	cfg &= ~DWC3_GSBUSCFG0_INCRBRST_MASK;
+	if (incrx_mode)
+		cfg |= DWC3_GSBUSCFG0_INCRBRSTENA;
+	switch (incrx_size) {
+	case 256:
+		cfg |= DWC3_GSBUSCFG0_INCR256BRSTENA;
+		break;
+	case 128:
+		cfg |= DWC3_GSBUSCFG0_INCR128BRSTENA;
+		break;
+	case 64:
+		cfg |= DWC3_GSBUSCFG0_INCR64BRSTENA;
+		break;
+	case 32:
+		cfg |= DWC3_GSBUSCFG0_INCR32BRSTENA;
+		break;
+	case 16:
+		cfg |= DWC3_GSBUSCFG0_INCR16BRSTENA;
+		break;
+	case 8:
+		cfg |= DWC3_GSBUSCFG0_INCR8BRSTENA;
+		break;
+	case 4:
+		cfg |= DWC3_GSBUSCFG0_INCR4BRSTENA;
+		break;
+	case 1:
+		break;
+	default:
+		dev_err(dev, "Invalid property\n");
+		break;
+	}
+
+	dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, cfg);
+}
+
+static void dwc3_set_power_down_clk_scale(struct dwc3 *dwc)
+{
+	u32 scale;
+	u32 reg;
+
+	if (!dwc->susp_clk)
+		return;
+
+	/*
+	 * The power down scale field specifies how many suspend_clk
+	 * periods fit into a 16KHz clock period. When performing
+	 * the division, round up the remainder.
+	 *
+	 * The power down scale value is calculated using the fastest
+	 * frequency of the suspend_clk. If it isn't fixed (but within
+	 * the accuracy requirement), the driver may not know the max
+	 * rate of the suspend_clk, so only update the power down scale
+	 * if the default is less than the calculated value from
+	 * clk_get_rate() or if the default is questionably high
+	 * (3x or more) to be within the requirement.
+	 */
+	scale = DIV_ROUND_UP(clk_get_rate(dwc->susp_clk), 16000);
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	if ((reg & DWC3_GCTL_PWRDNSCALE_MASK) < DWC3_GCTL_PWRDNSCALE(scale) ||
+	    (reg & DWC3_GCTL_PWRDNSCALE_MASK) > DWC3_GCTL_PWRDNSCALE(scale*3)) {
+		reg &= ~(DWC3_GCTL_PWRDNSCALE_MASK);
+		reg |= DWC3_GCTL_PWRDNSCALE(scale);
+		dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+	}
+}
+
+static void dwc3_config_threshold(struct dwc3 *dwc)
+{
+	u32 reg;
+	u8 rx_thr_num;
+	u8 rx_maxburst;
+	u8 tx_thr_num;
+	u8 tx_maxburst;
+
+	/*
+	 * Must config both number of packets and max burst settings to enable
+	 * RX and/or TX threshold.
+	 */
+	if (!DWC3_IP_IS(DWC3) && dwc->dr_mode == USB_DR_MODE_HOST) {
+		rx_thr_num = dwc->rx_thr_num_pkt_prd;
+		rx_maxburst = dwc->rx_max_burst_prd;
+		tx_thr_num = dwc->tx_thr_num_pkt_prd;
+		tx_maxburst = dwc->tx_max_burst_prd;
+
+		if (rx_thr_num && rx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
+			reg |= DWC31_RXTHRNUMPKTSEL_PRD;
+
+			reg &= ~DWC31_RXTHRNUMPKT_PRD(~0);
+			reg |= DWC31_RXTHRNUMPKT_PRD(rx_thr_num);
+
+			reg &= ~DWC31_MAXRXBURSTSIZE_PRD(~0);
+			reg |= DWC31_MAXRXBURSTSIZE_PRD(rx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
+		}
+
+		if (tx_thr_num && tx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
+			reg |= DWC31_TXTHRNUMPKTSEL_PRD;
+
+			reg &= ~DWC31_TXTHRNUMPKT_PRD(~0);
+			reg |= DWC31_TXTHRNUMPKT_PRD(tx_thr_num);
+
+			reg &= ~DWC31_MAXTXBURSTSIZE_PRD(~0);
+			reg |= DWC31_MAXTXBURSTSIZE_PRD(tx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
+		}
+	}
+
+	rx_thr_num = dwc->rx_thr_num_pkt;
+	rx_maxburst = dwc->rx_max_burst;
+	tx_thr_num = dwc->tx_thr_num_pkt;
+	tx_maxburst = dwc->tx_max_burst;
+
+	if (DWC3_IP_IS(DWC3)) {
+		if (rx_thr_num && rx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
+			reg |= DWC3_GRXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC3_GRXTHRCFG_RXPKTCNT(~0);
+			reg |= DWC3_GRXTHRCFG_RXPKTCNT(rx_thr_num);
+
+			reg &= ~DWC3_GRXTHRCFG_MAXRXBURSTSIZE(~0);
+			reg |= DWC3_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
+		}
+
+		if (tx_thr_num && tx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
+			reg |= DWC3_GTXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC3_GTXTHRCFG_TXPKTCNT(~0);
+			reg |= DWC3_GTXTHRCFG_TXPKTCNT(tx_thr_num);
+
+			reg &= ~DWC3_GTXTHRCFG_MAXTXBURSTSIZE(~0);
+			reg |= DWC3_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
+		}
+	} else {
+		if (rx_thr_num && rx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
+			reg |= DWC31_GRXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC31_GRXTHRCFG_RXPKTCNT(~0);
+			reg |= DWC31_GRXTHRCFG_RXPKTCNT(rx_thr_num);
+
+			reg &= ~DWC31_GRXTHRCFG_MAXRXBURSTSIZE(~0);
+			reg |= DWC31_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
+		}
+
+		if (tx_thr_num && tx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
+			reg |= DWC31_GTXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC31_GTXTHRCFG_TXPKTCNT(~0);
+			reg |= DWC31_GTXTHRCFG_TXPKTCNT(tx_thr_num);
+
+			reg &= ~DWC31_GTXTHRCFG_MAXTXBURSTSIZE(~0);
+			reg |= DWC31_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
+		}
+	}
+}
+
+/**
+ * dwc3_core_init - Low-level initialization of DWC3 Core
+ * @dwc: Pointer to our controller context structure
+ *
+ * Returns 0 on success otherwise negative errno.
+ */
+static int dwc3_core_init(struct dwc3 *dwc)
+{
+	unsigned int		hw_mode;
+	u32			reg;
+	int			ret;
+
+	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+
+	/*
+	 * Write Linux Version Code to our GUID register so it's easy to figure
+	 * out which kernel version a bug was found.
+	 */
+	dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE);
+
+	ret = dwc3_phy_setup(dwc);
+	if (ret)
+		goto err0;
+
+	if (!dwc->ulpi_ready) {
+		ret = dwc3_core_ulpi_init(dwc);
+		if (ret) {
+			if (ret == -ETIMEDOUT) {
+				dwc3_core_soft_reset(dwc);
+				ret = -EPROBE_DEFER;
+			}
+			goto err0;
+		}
+		dwc->ulpi_ready = true;
+	}
+
+	if (!dwc->phys_ready) {
+		ret = dwc3_core_get_phy(dwc);
+		if (ret)
+			goto err0a;
+		dwc->phys_ready = true;
+	}
+
+	usb_phy_init(dwc->usb2_phy);
+	usb_phy_init(dwc->usb3_phy);
+	ret = phy_init(dwc->usb2_generic_phy);
+	if (ret < 0)
+		goto err0a;
+
+	ret = phy_init(dwc->usb3_generic_phy);
+	if (ret < 0) {
+		phy_exit(dwc->usb2_generic_phy);
+		goto err0a;
+	}
+
+	ret = dwc3_core_soft_reset(dwc);
+	if (ret)
+		goto err1;
+
+	if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD &&
+	    !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) {
+		if (!dwc->dis_u3_susphy_quirk) {
+			reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+			reg |= DWC3_GUSB3PIPECTL_SUSPHY;
+			dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+		}
+
+		if (!dwc->dis_u2_susphy_quirk) {
+			reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+			reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+		}
+	}
+
+	dwc3_core_setup_global_control(dwc);
+	dwc3_core_num_eps(dwc);
+
+	ret = dwc3_setup_scratch_buffers(dwc);
+	if (ret)
+		goto err1;
+
+	/* Set power down scale of suspend_clk */
+	dwc3_set_power_down_clk_scale(dwc);
+
+	/* Adjust Frame Length */
+	dwc3_frame_length_adjustment(dwc);
+
+	/* Adjust Reference Clock Period */
+	dwc3_ref_clk_period(dwc);
+
+	dwc3_set_incr_burst_type(dwc);
+
+	usb_phy_set_suspend(dwc->usb2_phy, 0);
+	usb_phy_set_suspend(dwc->usb3_phy, 0);
+	ret = phy_power_on(dwc->usb2_generic_phy);
+	if (ret < 0)
+		goto err2;
+
+	ret = phy_power_on(dwc->usb3_generic_phy);
+	if (ret < 0)
+		goto err3;
+
+	ret = dwc3_event_buffers_setup(dwc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to setup event buffers\n");
+		goto err4;
+	}
+
+	/*
+	 * ENDXFER polling is available on version 3.10a and later of
+	 * the DWC_usb3 controller. It is NOT available in the
+	 * DWC_usb31 controller.
+	 */
+	if (DWC3_VER_IS_WITHIN(DWC3, 310A, ANY)) {
+		reg = dwc3_readl(dwc->regs, DWC3_GUCTL2);
+		reg |= DWC3_GUCTL2_RST_ACTBITLATER;
+		dwc3_writel(dwc->regs, DWC3_GUCTL2, reg);
+	}
+
+	/*
+	 * When configured in HOST mode, after issuing U3/L2 exit controller
+	 * fails to send proper CRC checksum in CRC5 feild. Because of this
+	 * behaviour Transaction Error is generated, resulting in reset and
+	 * re-enumeration of usb device attached. All the termsel, xcvrsel,
+	 * opmode becomes 0 during end of resume. Enabling bit 10 of GUCTL1
+	 * will correct this problem. This option is to support certain
+	 * legacy ULPI PHYs.
+	 */
+	if (dwc->resume_hs_terminations) {
+		reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
+		reg |= DWC3_GUCTL1_RESUME_OPMODE_HS_HOST;
+		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
+	}
+
+	if (!DWC3_VER_IS_PRIOR(DWC3, 250A)) {
+		reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
+
+		/*
+		 * Enable hardware control of sending remote wakeup
+		 * in HS when the device is in the L1 state.
+		 */
+		if (!DWC3_VER_IS_PRIOR(DWC3, 290A))
+			reg |= DWC3_GUCTL1_DEV_L1_EXIT_BY_HW;
+
+		/*
+		 * Decouple USB 2.0 L1 & L2 events which will allow for
+		 * gadget driver to only receive U3/L2 suspend & wakeup
+		 * events and prevent the more frequent L1 LPM transitions
+		 * from interrupting the driver.
+		 */
+		if (!DWC3_VER_IS_PRIOR(DWC3, 300A))
+			reg |= DWC3_GUCTL1_DEV_DECOUPLE_L1L2_EVT;
+
+		if (dwc->dis_tx_ipgap_linecheck_quirk)
+			reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS;
+
+		if (dwc->parkmode_disable_ss_quirk)
+			reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS;
+
+		if (DWC3_VER_IS_WITHIN(DWC3, 290A, ANY) &&
+		    (dwc->maximum_speed == USB_SPEED_HIGH ||
+		     dwc->maximum_speed == USB_SPEED_FULL))
+			reg |= DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK;
+
+		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
+	}
+
+	dwc3_config_threshold(dwc);
+
+	return 0;
+
+err4:
+	phy_power_off(dwc->usb3_generic_phy);
+
+err3:
+	phy_power_off(dwc->usb2_generic_phy);
+
+err2:
+	usb_phy_set_suspend(dwc->usb2_phy, 1);
+	usb_phy_set_suspend(dwc->usb3_phy, 1);
+
+err1:
+	usb_phy_shutdown(dwc->usb2_phy);
+	usb_phy_shutdown(dwc->usb3_phy);
+	phy_exit(dwc->usb2_generic_phy);
+	phy_exit(dwc->usb3_generic_phy);
+
+err0a:
+	dwc3_ulpi_exit(dwc);
+
+err0:
+	return ret;
+}
+
+static int dwc3_core_get_phy(struct dwc3 *dwc)
+{
+	struct device		*dev = dwc->dev;
+	struct device_node	*node = dev->of_node;
+	int ret;
+
+	if (node) {
+		dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
+		dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1);
+	} else {
+		dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+		dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
+	}
+
+	if (IS_ERR(dwc->usb2_phy)) {
+		ret = PTR_ERR(dwc->usb2_phy);
+		if (ret == -ENXIO || ret == -ENODEV)
+			dwc->usb2_phy = NULL;
+		else
+			return dev_err_probe(dev, ret, "no usb2 phy configured\n");
+	}
+
+	if (IS_ERR(dwc->usb3_phy)) {
+		ret = PTR_ERR(dwc->usb3_phy);
+		if (ret == -ENXIO || ret == -ENODEV)
+			dwc->usb3_phy = NULL;
+		else
+			return dev_err_probe(dev, ret, "no usb3 phy configured\n");
+	}
+
+	dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
+	if (IS_ERR(dwc->usb2_generic_phy)) {
+		ret = PTR_ERR(dwc->usb2_generic_phy);
+		if (ret == -ENOSYS || ret == -ENODEV)
+			dwc->usb2_generic_phy = NULL;
+		else
+			return dev_err_probe(dev, ret, "no usb2 phy configured\n");
+	}
+
+	dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
+	if (IS_ERR(dwc->usb3_generic_phy)) {
+		ret = PTR_ERR(dwc->usb3_generic_phy);
+		if (ret == -ENOSYS || ret == -ENODEV)
+			dwc->usb3_generic_phy = NULL;
+		else
+			return dev_err_probe(dev, ret, "no usb3 phy configured\n");
+	}
+
+	return 0;
+}
+
+static int dwc3_core_init_mode(struct dwc3 *dwc)
+{
+	struct device *dev = dwc->dev;
+	int ret;
+
+	switch (dwc->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+
+		if (dwc->usb2_phy)
+			otg_set_vbus(dwc->usb2_phy->otg, false);
+		phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
+		phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
+
+		ret = dwc3_gadget_init(dwc);
+		if (ret)
+			return dev_err_probe(dev, ret, "failed to initialize gadget\n");
+		break;
+	case USB_DR_MODE_HOST:
+		dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
+
+		if (dwc->usb2_phy)
+			otg_set_vbus(dwc->usb2_phy->otg, true);
+		phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
+		phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
+
+		ret = dwc3_host_init(dwc);
+		if (ret)
+			return dev_err_probe(dev, ret, "failed to initialize host\n");
+		break;
+	case USB_DR_MODE_OTG:
+		INIT_WORK(&dwc->drd_work, __dwc3_set_mode);
+		ret = dwc3_drd_init(dwc);
+		if (ret)
+			return dev_err_probe(dev, ret, "failed to initialize dual-role\n");
+		break;
+	default:
+		dev_err(dev, "Unsupported mode of operation %d\n", dwc->dr_mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void dwc3_core_exit_mode(struct dwc3 *dwc)
+{
+	switch (dwc->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		dwc3_gadget_exit(dwc);
+		break;
+	case USB_DR_MODE_HOST:
+		dwc3_host_exit(dwc);
+		break;
+	case USB_DR_MODE_OTG:
+		dwc3_drd_exit(dwc);
+		break;
+	default:
+		/* do nothing */
+		break;
+	}
+
+	/* de-assert DRVVBUS for HOST and OTG mode */
+	dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+}
+
+static void dwc3_get_properties(struct dwc3 *dwc)
+{
+	struct device		*dev = dwc->dev;
+	u8			lpm_nyet_threshold;
+	u8			tx_de_emphasis;
+	u8			hird_threshold;
+	u8			rx_thr_num_pkt = 0;
+	u8			rx_max_burst = 0;
+	u8			tx_thr_num_pkt = 0;
+	u8			tx_max_burst = 0;
+	u8			rx_thr_num_pkt_prd = 0;
+	u8			rx_max_burst_prd = 0;
+	u8			tx_thr_num_pkt_prd = 0;
+	u8			tx_max_burst_prd = 0;
+	u8			tx_fifo_resize_max_num;
+	const char		*usb_psy_name;
+	int			ret;
+
+	/* default to highest possible threshold */
+	lpm_nyet_threshold = 0xf;
+
+	/* default to -3.5dB de-emphasis */
+	tx_de_emphasis = 1;
+
+	/*
+	 * default to assert utmi_sleep_n and use maximum allowed HIRD
+	 * threshold value of 0b1100
+	 */
+	hird_threshold = 12;
+
+	/*
+	 * default to a TXFIFO size large enough to fit 6 max packets.  This
+	 * allows for systems with larger bus latencies to have some headroom
+	 * for endpoints that have a large bMaxBurst value.
+	 */
+	tx_fifo_resize_max_num = 6;
+
+	dwc->maximum_speed = usb_get_maximum_speed(dev);
+	dwc->max_ssp_rate = usb_get_maximum_ssp_rate(dev);
+	dwc->dr_mode = usb_get_dr_mode(dev);
+	dwc->hsphy_mode = of_usb_get_phy_mode(dev->of_node);
+
+	dwc->sysdev_is_parent = device_property_read_bool(dev,
+				"linux,sysdev_is_parent");
+	if (dwc->sysdev_is_parent)
+		dwc->sysdev = dwc->dev->parent;
+	else
+		dwc->sysdev = dwc->dev;
+
+	ret = device_property_read_string(dev, "usb-psy-name", &usb_psy_name);
+	if (ret >= 0) {
+		dwc->usb_psy = power_supply_get_by_name(usb_psy_name);
+		if (!dwc->usb_psy)
+			dev_err(dev, "couldn't get usb power supply\n");
+	}
+
+	dwc->has_lpm_erratum = device_property_read_bool(dev,
+				"snps,has-lpm-erratum");
+	device_property_read_u8(dev, "snps,lpm-nyet-threshold",
+				&lpm_nyet_threshold);
+	dwc->is_utmi_l1_suspend = device_property_read_bool(dev,
+				"snps,is-utmi-l1-suspend");
+	device_property_read_u8(dev, "snps,hird-threshold",
+				&hird_threshold);
+	dwc->dis_start_transfer_quirk = device_property_read_bool(dev,
+				"snps,dis-start-transfer-quirk");
+	dwc->usb3_lpm_capable = device_property_read_bool(dev,
+				"snps,usb3_lpm_capable");
+	dwc->usb2_lpm_disable = device_property_read_bool(dev,
+				"snps,usb2-lpm-disable");
+	dwc->usb2_gadget_lpm_disable = device_property_read_bool(dev,
+				"snps,usb2-gadget-lpm-disable");
+	device_property_read_u8(dev, "snps,rx-thr-num-pkt",
+				&rx_thr_num_pkt);
+	device_property_read_u8(dev, "snps,rx-max-burst",
+				&rx_max_burst);
+	device_property_read_u8(dev, "snps,tx-thr-num-pkt",
+				&tx_thr_num_pkt);
+	device_property_read_u8(dev, "snps,tx-max-burst",
+				&tx_max_burst);
+	device_property_read_u8(dev, "snps,rx-thr-num-pkt-prd",
+				&rx_thr_num_pkt_prd);
+	device_property_read_u8(dev, "snps,rx-max-burst-prd",
+				&rx_max_burst_prd);
+	device_property_read_u8(dev, "snps,tx-thr-num-pkt-prd",
+				&tx_thr_num_pkt_prd);
+	device_property_read_u8(dev, "snps,tx-max-burst-prd",
+				&tx_max_burst_prd);
+	dwc->do_fifo_resize = device_property_read_bool(dev,
+							"tx-fifo-resize");
+	if (dwc->do_fifo_resize)
+		device_property_read_u8(dev, "tx-fifo-max-num",
+					&tx_fifo_resize_max_num);
+
+	dwc->disable_scramble_quirk = device_property_read_bool(dev,
+				"snps,disable_scramble_quirk");
+	dwc->u2exit_lfps_quirk = device_property_read_bool(dev,
+				"snps,u2exit_lfps_quirk");
+	dwc->u2ss_inp3_quirk = device_property_read_bool(dev,
+				"snps,u2ss_inp3_quirk");
+	dwc->req_p1p2p3_quirk = device_property_read_bool(dev,
+				"snps,req_p1p2p3_quirk");
+	dwc->del_p1p2p3_quirk = device_property_read_bool(dev,
+				"snps,del_p1p2p3_quirk");
+	dwc->del_phy_power_chg_quirk = device_property_read_bool(dev,
+				"snps,del_phy_power_chg_quirk");
+	dwc->lfps_filter_quirk = device_property_read_bool(dev,
+				"snps,lfps_filter_quirk");
+	dwc->rx_detect_poll_quirk = device_property_read_bool(dev,
+				"snps,rx_detect_poll_quirk");
+	dwc->dis_u3_susphy_quirk = device_property_read_bool(dev,
+				"snps,dis_u3_susphy_quirk");
+	dwc->dis_u2_susphy_quirk = device_property_read_bool(dev,
+				"snps,dis_u2_susphy_quirk");
+	dwc->dis_enblslpm_quirk = device_property_read_bool(dev,
+				"snps,dis_enblslpm_quirk");
+	dwc->dis_u1_entry_quirk = device_property_read_bool(dev,
+				"snps,dis-u1-entry-quirk");
+	dwc->dis_u2_entry_quirk = device_property_read_bool(dev,
+				"snps,dis-u2-entry-quirk");
+	dwc->dis_rxdet_inp3_quirk = device_property_read_bool(dev,
+				"snps,dis_rxdet_inp3_quirk");
+	dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev,
+				"snps,dis-u2-freeclk-exists-quirk");
+	dwc->dis_del_phy_power_chg_quirk = device_property_read_bool(dev,
+				"snps,dis-del-phy-power-chg-quirk");
+	dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev,
+				"snps,dis-tx-ipgap-linecheck-quirk");
+	dwc->resume_hs_terminations = device_property_read_bool(dev,
+				"snps,resume-hs-terminations");
+	dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev,
+				"snps,parkmode-disable-ss-quirk");
+	dwc->gfladj_refclk_lpm_sel = device_property_read_bool(dev,
+				"snps,gfladj-refclk-lpm-sel-quirk");
+
+	dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
+				"snps,tx_de_emphasis_quirk");
+	device_property_read_u8(dev, "snps,tx_de_emphasis",
+				&tx_de_emphasis);
+	device_property_read_string(dev, "snps,hsphy_interface",
+				    &dwc->hsphy_interface);
+	device_property_read_u32(dev, "snps,quirk-frame-length-adjustment",
+				 &dwc->fladj);
+	device_property_read_u32(dev, "snps,ref-clock-period-ns",
+				 &dwc->ref_clk_per);
+
+	dwc->dis_metastability_quirk = device_property_read_bool(dev,
+				"snps,dis_metastability_quirk");
+
+	dwc->dis_split_quirk = device_property_read_bool(dev,
+				"snps,dis-split-quirk");
+
+	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
+	dwc->tx_de_emphasis = tx_de_emphasis;
+
+	dwc->hird_threshold = hird_threshold;
+
+	dwc->rx_thr_num_pkt = rx_thr_num_pkt;
+	dwc->rx_max_burst = rx_max_burst;
+
+	dwc->tx_thr_num_pkt = tx_thr_num_pkt;
+	dwc->tx_max_burst = tx_max_burst;
+
+	dwc->rx_thr_num_pkt_prd = rx_thr_num_pkt_prd;
+	dwc->rx_max_burst_prd = rx_max_burst_prd;
+
+	dwc->tx_thr_num_pkt_prd = tx_thr_num_pkt_prd;
+	dwc->tx_max_burst_prd = tx_max_burst_prd;
+
+	dwc->imod_interval = 0;
+
+	dwc->tx_fifo_resize_max_num = tx_fifo_resize_max_num;
+}
+
+/* check whether the core supports IMOD */
+bool dwc3_has_imod(struct dwc3 *dwc)
+{
+	return DWC3_VER_IS_WITHIN(DWC3, 300A, ANY) ||
+		DWC3_VER_IS_WITHIN(DWC31, 120A, ANY) ||
+		DWC3_IP_IS(DWC32);
+}
+
+static void dwc3_check_params(struct dwc3 *dwc)
+{
+	struct device *dev = dwc->dev;
+	unsigned int hwparam_gen =
+		DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3);
+
+	/* Check for proper value of imod_interval */
+	if (dwc->imod_interval && !dwc3_has_imod(dwc)) {
+		dev_warn(dwc->dev, "Interrupt moderation not supported\n");
+		dwc->imod_interval = 0;
+	}
+
+	/*
+	 * Workaround for STAR 9000961433 which affects only version
+	 * 3.00a of the DWC_usb3 core. This prevents the controller
+	 * interrupt from being masked while handling events. IMOD
+	 * allows us to work around this issue. Enable it for the
+	 * affected version.
+	 */
+	if (!dwc->imod_interval &&
+	    DWC3_VER_IS(DWC3, 300A))
+		dwc->imod_interval = 1;
+
+	/* Check the maximum_speed parameter */
+	switch (dwc->maximum_speed) {
+	case USB_SPEED_FULL:
+	case USB_SPEED_HIGH:
+		break;
+	case USB_SPEED_SUPER:
+		if (hwparam_gen == DWC3_GHWPARAMS3_SSPHY_IFC_DIS)
+			dev_warn(dev, "UDC doesn't support Gen 1\n");
+		break;
+	case USB_SPEED_SUPER_PLUS:
+		if ((DWC3_IP_IS(DWC32) &&
+		     hwparam_gen == DWC3_GHWPARAMS3_SSPHY_IFC_DIS) ||
+		    (!DWC3_IP_IS(DWC32) &&
+		     hwparam_gen != DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
+			dev_warn(dev, "UDC doesn't support SSP\n");
+		break;
+	default:
+		dev_err(dev, "invalid maximum_speed parameter %d\n",
+			dwc->maximum_speed);
+		fallthrough;
+	case USB_SPEED_UNKNOWN:
+		switch (hwparam_gen) {
+		case DWC3_GHWPARAMS3_SSPHY_IFC_GEN2:
+			dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
+			break;
+		case DWC3_GHWPARAMS3_SSPHY_IFC_GEN1:
+			if (DWC3_IP_IS(DWC32))
+				dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
+			else
+				dwc->maximum_speed = USB_SPEED_SUPER;
+			break;
+		case DWC3_GHWPARAMS3_SSPHY_IFC_DIS:
+			dwc->maximum_speed = USB_SPEED_HIGH;
+			break;
+		default:
+			dwc->maximum_speed = USB_SPEED_SUPER;
+			break;
+		}
+		break;
+	}
+
+	/*
+	 * Currently the controller does not have visibility into the HW
+	 * parameter to determine the maximum number of lanes the HW supports.
+	 * If the number of lanes is not specified in the device property, then
+	 * set the default to support dual-lane for DWC_usb32 and single-lane
+	 * for DWC_usb31 for super-speed-plus.
+	 */
+	if (dwc->maximum_speed == USB_SPEED_SUPER_PLUS) {
+		switch (dwc->max_ssp_rate) {
+		case USB_SSP_GEN_2x1:
+			if (hwparam_gen == DWC3_GHWPARAMS3_SSPHY_IFC_GEN1)
+				dev_warn(dev, "UDC only supports Gen 1\n");
+			break;
+		case USB_SSP_GEN_1x2:
+		case USB_SSP_GEN_2x2:
+			if (DWC3_IP_IS(DWC31))
+				dev_warn(dev, "UDC only supports single lane\n");
+			break;
+		case USB_SSP_GEN_UNKNOWN:
+		default:
+			switch (hwparam_gen) {
+			case DWC3_GHWPARAMS3_SSPHY_IFC_GEN2:
+				if (DWC3_IP_IS(DWC32))
+					dwc->max_ssp_rate = USB_SSP_GEN_2x2;
+				else
+					dwc->max_ssp_rate = USB_SSP_GEN_2x1;
+				break;
+			case DWC3_GHWPARAMS3_SSPHY_IFC_GEN1:
+				if (DWC3_IP_IS(DWC32))
+					dwc->max_ssp_rate = USB_SSP_GEN_1x2;
+				break;
+			}
+			break;
+		}
+	}
+}
+
+static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
+{
+	struct device *dev = dwc->dev;
+	struct device_node *np_phy;
+	struct extcon_dev *edev = NULL;
+	const char *name;
+
+	if (device_property_read_bool(dev, "extcon"))
+		return extcon_get_edev_by_phandle(dev, 0);
+
+	/*
+	 * Device tree platforms should get extcon via phandle.
+	 * On ACPI platforms, we get the name from a device property.
+	 * This device property is for kernel internal use only and
+	 * is expected to be set by the glue code.
+	 */
+	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0)
+		return extcon_get_extcon_dev(name);
+
+	/*
+	 * Check explicitly if "usb-role-switch" is used since
+	 * extcon_find_edev_by_node() can not be used to check the absence of
+	 * an extcon device. In the absence of an device it will always return
+	 * EPROBE_DEFER.
+	 */
+	if (IS_ENABLED(CONFIG_USB_ROLE_SWITCH) &&
+	    device_property_read_bool(dev, "usb-role-switch"))
+		return NULL;
+
+	/*
+	 * Try to get an extcon device from the USB PHY controller's "port"
+	 * node. Check if it has the "port" node first, to avoid printing the
+	 * error message from underlying code, as it's a valid case: extcon
+	 * device (and "port" node) may be missing in case of "usb-role-switch"
+	 * or OTG mode.
+	 */
+	np_phy = of_parse_phandle(dev->of_node, "phys", 0);
+	if (of_graph_is_present(np_phy)) {
+		struct device_node *np_conn;
+
+		np_conn = of_graph_get_remote_node(np_phy, -1, -1);
+		if (np_conn)
+			edev = extcon_find_edev_by_node(np_conn);
+		of_node_put(np_conn);
+	}
+	of_node_put(np_phy);
+
+	return edev;
+}
+
+static int dwc3_probe(struct platform_device *pdev)
+{
+	struct device		*dev = &pdev->dev;
+	struct resource		*res, dwc_res;
+	struct dwc3		*dwc;
+
+	int			ret;
+
+	void __iomem		*regs;
+
+	dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL);
+	if (!dwc)
+		return -ENOMEM;
+
+	dwc->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "missing memory resource\n");
+		return -ENODEV;
+	}
+
+	dwc->xhci_resources[0].start = res->start;
+	dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
+					DWC3_XHCI_REGS_END;
+	dwc->xhci_resources[0].flags = res->flags;
+	dwc->xhci_resources[0].name = res->name;
+
+	/*
+	 * Request memory region but exclude xHCI regs,
+	 * since it will be requested by the xhci-plat driver.
+	 */
+	dwc_res = *res;
+	dwc_res.start += DWC3_GLOBALS_REGS_START;
+
+	regs = devm_ioremap_resource(dev, &dwc_res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	dwc->regs	= regs;
+	dwc->regs_size	= resource_size(&dwc_res);
+
+	dwc3_get_properties(dwc);
+
+	dwc->reset = devm_reset_control_array_get_optional_shared(dev);
+	if (IS_ERR(dwc->reset)) {
+		ret = PTR_ERR(dwc->reset);
+		goto put_usb_psy;
+	}
+
+	if (dev->of_node) {
+		/*
+		 * Clocks are optional, but new DT platforms should support all
+		 * clocks as required by the DT-binding.
+		 * Some devices have different clock names in legacy device trees,
+		 * check for them to retain backwards compatibility.
+		 */
+		dwc->bus_clk = devm_clk_get_optional(dev, "bus_early");
+		if (IS_ERR(dwc->bus_clk)) {
+			ret = dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
+					    "could not get bus clock\n");
+			goto put_usb_psy;
+		}
+
+		if (dwc->bus_clk == NULL) {
+			dwc->bus_clk = devm_clk_get_optional(dev, "bus_clk");
+			if (IS_ERR(dwc->bus_clk)) {
+				ret = dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
+						    "could not get bus clock\n");
+				goto put_usb_psy;
+			}
+		}
+
+		dwc->ref_clk = devm_clk_get_optional(dev, "ref");
+		if (IS_ERR(dwc->ref_clk)) {
+			ret = dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
+					    "could not get ref clock\n");
+			goto put_usb_psy;
+		}
+
+		if (dwc->ref_clk == NULL) {
+			dwc->ref_clk = devm_clk_get_optional(dev, "ref_clk");
+			if (IS_ERR(dwc->ref_clk)) {
+				ret = dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
+						    "could not get ref clock\n");
+				goto put_usb_psy;
+			}
+		}
+
+		dwc->susp_clk = devm_clk_get_optional(dev, "suspend");
+		if (IS_ERR(dwc->susp_clk)) {
+			ret = dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
+					    "could not get suspend clock\n");
+			goto put_usb_psy;
+		}
+
+		if (dwc->susp_clk == NULL) {
+			dwc->susp_clk = devm_clk_get_optional(dev, "suspend_clk");
+			if (IS_ERR(dwc->susp_clk)) {
+				ret = dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
+						    "could not get suspend clock\n");
+				goto put_usb_psy;
+			}
+		}
+	}
+
+	ret = reset_control_deassert(dwc->reset);
+	if (ret)
+		goto put_usb_psy;
+
+	ret = dwc3_clk_enable(dwc);
+	if (ret)
+		goto assert_reset;
+
+	if (!dwc3_core_is_valid(dwc)) {
+		dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
+		ret = -ENODEV;
+		goto disable_clks;
+	}
+
+	platform_set_drvdata(pdev, dwc);
+	dwc3_cache_hwparams(dwc);
+
+	if (!dwc->sysdev_is_parent &&
+	    DWC3_GHWPARAMS0_AWIDTH(dwc->hwparams.hwparams0) == 64) {
+		ret = dma_set_mask_and_coherent(dwc->sysdev, DMA_BIT_MASK(64));
+		if (ret)
+			goto disable_clks;
+	}
+
+	spin_lock_init(&dwc->lock);
+	mutex_init(&dwc->mutex);
+
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_autosuspend_delay(dev, DWC3_DEFAULT_AUTOSUSPEND_DELAY);
+	pm_runtime_enable(dev);
+
+	pm_runtime_forbid(dev);
+
+	ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
+	if (ret) {
+		dev_err(dwc->dev, "failed to allocate event buffers\n");
+		ret = -ENOMEM;
+		goto err2;
+	}
+
+	dwc->edev = dwc3_get_extcon(dwc);
+	if (IS_ERR(dwc->edev)) {
+		ret = dev_err_probe(dwc->dev, PTR_ERR(dwc->edev), "failed to get extcon\n");
+		goto err3;
+	}
+
+	ret = dwc3_get_dr_mode(dwc);
+	if (ret)
+		goto err3;
+
+	ret = dwc3_alloc_scratch_buffers(dwc);
+	if (ret)
+		goto err3;
+
+	ret = dwc3_core_init(dwc);
+	if (ret) {
+		dev_err_probe(dev, ret, "failed to initialize core\n");
+		goto err4;
+	}
+
+	dwc3_check_params(dwc);
+	dwc3_debugfs_init(dwc);
+
+	ret = dwc3_core_init_mode(dwc);
+	if (ret)
+		goto err5;
+
+	pm_runtime_put(dev);
+
+	dma_set_max_seg_size(dev, UINT_MAX);
+
+	return 0;
+
+err5:
+	dwc3_debugfs_exit(dwc);
+	dwc3_event_buffers_cleanup(dwc);
+
+	usb_phy_set_suspend(dwc->usb2_phy, 1);
+	usb_phy_set_suspend(dwc->usb3_phy, 1);
+	phy_power_off(dwc->usb2_generic_phy);
+	phy_power_off(dwc->usb3_generic_phy);
+
+	usb_phy_shutdown(dwc->usb2_phy);
+	usb_phy_shutdown(dwc->usb3_phy);
+	phy_exit(dwc->usb2_generic_phy);
+	phy_exit(dwc->usb3_generic_phy);
+
+	dwc3_ulpi_exit(dwc);
+
+err4:
+	dwc3_free_scratch_buffers(dwc);
+
+err3:
+	dwc3_free_event_buffers(dwc);
+
+err2:
+	pm_runtime_allow(dev);
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_put_noidle(dev);
+disable_clks:
+	dwc3_clk_disable(dwc);
+assert_reset:
+	reset_control_assert(dwc->reset);
+put_usb_psy:
+	if (dwc->usb_psy)
+		power_supply_put(dwc->usb_psy);
+
+	return ret;
+}
+
+static int dwc3_remove(struct platform_device *pdev)
+{
+	struct dwc3	*dwc = platform_get_drvdata(pdev);
+
+	pm_runtime_get_sync(&pdev->dev);
+
+	dwc3_core_exit_mode(dwc);
+	dwc3_debugfs_exit(dwc);
+
+	dwc3_core_exit(dwc);
+	dwc3_ulpi_exit(dwc);
+
+	pm_runtime_allow(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	/*
+	 * HACK: Clear the driver data, which is currently accessed by parent
+	 * glue drivers, before allowing the parent to suspend.
+	 */
+	platform_set_drvdata(pdev, NULL);
+	pm_runtime_set_suspended(&pdev->dev);
+
+	dwc3_free_event_buffers(dwc);
+	dwc3_free_scratch_buffers(dwc);
+
+	if (dwc->usb_psy)
+		power_supply_put(dwc->usb_psy);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int dwc3_core_init_for_resume(struct dwc3 *dwc)
+{
+	int ret;
+
+	ret = reset_control_deassert(dwc->reset);
+	if (ret)
+		return ret;
+
+	ret = dwc3_clk_enable(dwc);
+	if (ret)
+		goto assert_reset;
+
+	ret = dwc3_core_init(dwc);
+	if (ret)
+		goto disable_clks;
+
+	return 0;
+
+disable_clks:
+	dwc3_clk_disable(dwc);
+assert_reset:
+	reset_control_assert(dwc->reset);
+
+	return ret;
+}
+
+static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
+{
+	unsigned long	flags;
+	u32 reg;
+
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		if (pm_runtime_suspended(dwc->dev))
+			break;
+		dwc3_gadget_suspend(dwc);
+		synchronize_irq(dwc->irq_gadget);
+		dwc3_core_exit(dwc);
+		break;
+	case DWC3_GCTL_PRTCAP_HOST:
+		if (!PMSG_IS_AUTO(msg) && !device_may_wakeup(dwc->dev)) {
+			dwc3_core_exit(dwc);
+			break;
+		}
+
+		/* Let controller to suspend HSPHY before PHY driver suspends */
+		if (dwc->dis_u2_susphy_quirk ||
+		    dwc->dis_enblslpm_quirk) {
+			reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+			reg |=  DWC3_GUSB2PHYCFG_ENBLSLPM |
+				DWC3_GUSB2PHYCFG_SUSPHY;
+			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+
+			/* Give some time for USB2 PHY to suspend */
+			usleep_range(5000, 6000);
+		}
+
+		phy_pm_runtime_put_sync(dwc->usb2_generic_phy);
+		phy_pm_runtime_put_sync(dwc->usb3_generic_phy);
+		break;
+	case DWC3_GCTL_PRTCAP_OTG:
+		/* do nothing during runtime_suspend */
+		if (PMSG_IS_AUTO(msg))
+			break;
+
+		if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) {
+			spin_lock_irqsave(&dwc->lock, flags);
+			dwc3_gadget_suspend(dwc);
+			spin_unlock_irqrestore(&dwc->lock, flags);
+			synchronize_irq(dwc->irq_gadget);
+		}
+
+		dwc3_otg_exit(dwc);
+		dwc3_core_exit(dwc);
+		break;
+	default:
+		/* do nothing */
+		break;
+	}
+
+	return 0;
+}
+
+static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
+{
+	unsigned long	flags;
+	int		ret;
+	u32		reg;
+
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		ret = dwc3_core_init_for_resume(dwc);
+		if (ret)
+			return ret;
+
+		dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+		dwc3_gadget_resume(dwc);
+		break;
+	case DWC3_GCTL_PRTCAP_HOST:
+		if (!PMSG_IS_AUTO(msg) && !device_may_wakeup(dwc->dev)) {
+			ret = dwc3_core_init_for_resume(dwc);
+			if (ret)
+				return ret;
+			dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
+			break;
+		}
+		/* Restore GUSB2PHYCFG bits that were modified in suspend */
+		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+		if (dwc->dis_u2_susphy_quirk)
+			reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+
+		if (dwc->dis_enblslpm_quirk)
+			reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
+
+		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+
+		phy_pm_runtime_get_sync(dwc->usb2_generic_phy);
+		phy_pm_runtime_get_sync(dwc->usb3_generic_phy);
+		break;
+	case DWC3_GCTL_PRTCAP_OTG:
+		/* nothing to do on runtime_resume */
+		if (PMSG_IS_AUTO(msg))
+			break;
+
+		ret = dwc3_core_init_for_resume(dwc);
+		if (ret)
+			return ret;
+
+		dwc3_set_prtcap(dwc, dwc->current_dr_role);
+
+		dwc3_otg_init(dwc);
+		if (dwc->current_otg_role == DWC3_OTG_ROLE_HOST) {
+			dwc3_otg_host_init(dwc);
+		} else if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) {
+			spin_lock_irqsave(&dwc->lock, flags);
+			dwc3_gadget_resume(dwc);
+			spin_unlock_irqrestore(&dwc->lock, flags);
+		}
+
+		break;
+	default:
+		/* do nothing */
+		break;
+	}
+
+	return 0;
+}
+
+static int dwc3_runtime_checks(struct dwc3 *dwc)
+{
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		if (dwc->connected)
+			return -EBUSY;
+		break;
+	case DWC3_GCTL_PRTCAP_HOST:
+	default:
+		/* do nothing */
+		break;
+	}
+
+	return 0;
+}
+
+static int dwc3_runtime_suspend(struct device *dev)
+{
+	struct dwc3     *dwc = dev_get_drvdata(dev);
+	int		ret;
+
+	if (dwc3_runtime_checks(dwc))
+		return -EBUSY;
+
+	ret = dwc3_suspend_common(dwc, PMSG_AUTO_SUSPEND);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int dwc3_runtime_resume(struct device *dev)
+{
+	struct dwc3     *dwc = dev_get_drvdata(dev);
+	int		ret;
+
+	ret = dwc3_resume_common(dwc, PMSG_AUTO_RESUME);
+	if (ret)
+		return ret;
+
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		dwc3_gadget_process_pending_events(dwc);
+		break;
+	case DWC3_GCTL_PRTCAP_HOST:
+	default:
+		/* do nothing */
+		break;
+	}
+
+	pm_runtime_mark_last_busy(dev);
+
+	return 0;
+}
+
+static int dwc3_runtime_idle(struct device *dev)
+{
+	struct dwc3     *dwc = dev_get_drvdata(dev);
+
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		if (dwc3_runtime_checks(dwc))
+			return -EBUSY;
+		break;
+	case DWC3_GCTL_PRTCAP_HOST:
+	default:
+		/* do nothing */
+		break;
+	}
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_autosuspend(dev);
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_PM_SLEEP
+static int dwc3_suspend(struct device *dev)
+{
+	struct dwc3	*dwc = dev_get_drvdata(dev);
+	int		ret;
+
+	ret = dwc3_suspend_common(dwc, PMSG_SUSPEND);
+	if (ret)
+		return ret;
+
+	pinctrl_pm_select_sleep_state(dev);
+
+	return 0;
+}
+
+static int dwc3_resume(struct device *dev)
+{
+	struct dwc3	*dwc = dev_get_drvdata(dev);
+	int		ret;
+
+	pinctrl_pm_select_default_state(dev);
+
+	ret = dwc3_resume_common(dwc, PMSG_RESUME);
+	if (ret)
+		return ret;
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static void dwc3_complete(struct device *dev)
+{
+	struct dwc3	*dwc = dev_get_drvdata(dev);
+	u32		reg;
+
+	if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST &&
+			dwc->dis_split_quirk) {
+		reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+		reg |= DWC3_GUCTL3_SPLITDISABLE;
+		dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+	}
+}
+#else
+#define dwc3_complete NULL
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops dwc3_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
+	.complete = dwc3_complete,
+	SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
+			dwc3_runtime_idle)
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_dwc3_match[] = {
+	{
+		.compatible = "snps,dwc3"
+	},
+	{
+		.compatible = "synopsys,dwc3"
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_dwc3_match);
+#endif
+
+#ifdef CONFIG_ACPI
+
+#define ACPI_ID_INTEL_BSW	"808622B7"
+
+static const struct acpi_device_id dwc3_acpi_match[] = {
+	{ ACPI_ID_INTEL_BSW, 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match);
+#endif
+
+static struct platform_driver dwc3_driver = {
+	.probe		= dwc3_probe,
+	.remove		= dwc3_remove,
+	.driver		= {
+		.name	= "dwc3",
+		.of_match_table	= of_match_ptr(of_dwc3_match),
+		.acpi_match_table = ACPI_PTR(dwc3_acpi_match),
+		.pm	= &dwc3_dev_pm_ops,
+	},
+};
+
+module_platform_driver(dwc3_driver);
+
+MODULE_ALIAS("platform:dwc3");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
new file mode 100644
index 000000000..889c122da
--- /dev/null
+++ b/drivers/usb/dwc3/core.h
@@ -0,0 +1,1660 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * core.h - DesignWare USB3 DRD Core Header
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ */
+
+#ifndef __DRIVERS_USB_DWC3_CORE_H
+#define __DRIVERS_USB_DWC3_CORE_H
+
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/ioport.h>
+#include <linux/list.h>
+#include <linux/bitops.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/debugfs.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/role.h>
+#include <linux/ulpi/interface.h>
+
+#include <linux/phy/phy.h>
+
+#include <linux/power_supply.h>
+
+#define DWC3_MSG_MAX	500
+
+/* Global constants */
+#define DWC3_PULL_UP_TIMEOUT	500	/* ms */
+#define DWC3_BOUNCE_SIZE	1024	/* size of a superspeed bulk */
+#define DWC3_EP0_SETUP_SIZE	512
+#define DWC3_ENDPOINTS_NUM	32
+#define DWC3_XHCI_RESOURCES_NUM	2
+#define DWC3_ISOC_MAX_RETRIES	5
+
+#define DWC3_SCRATCHBUF_SIZE	4096	/* each buffer is assumed to be 4KiB */
+#define DWC3_EVENT_BUFFERS_SIZE	4096
+#define DWC3_EVENT_TYPE_MASK	0xfe
+
+#define DWC3_EVENT_TYPE_DEV	0
+#define DWC3_EVENT_TYPE_CARKIT	3
+#define DWC3_EVENT_TYPE_I2C	4
+
+#define DWC3_DEVICE_EVENT_DISCONNECT		0
+#define DWC3_DEVICE_EVENT_RESET			1
+#define DWC3_DEVICE_EVENT_CONNECT_DONE		2
+#define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE	3
+#define DWC3_DEVICE_EVENT_WAKEUP		4
+#define DWC3_DEVICE_EVENT_HIBER_REQ		5
+#define DWC3_DEVICE_EVENT_SUSPEND		6
+#define DWC3_DEVICE_EVENT_SOF			7
+#define DWC3_DEVICE_EVENT_ERRATIC_ERROR		9
+#define DWC3_DEVICE_EVENT_CMD_CMPL		10
+#define DWC3_DEVICE_EVENT_OVERFLOW		11
+
+/* Controller's role while using the OTG block */
+#define DWC3_OTG_ROLE_IDLE	0
+#define DWC3_OTG_ROLE_HOST	1
+#define DWC3_OTG_ROLE_DEVICE	2
+
+#define DWC3_GEVNTCOUNT_MASK	0xfffc
+#define DWC3_GEVNTCOUNT_EHB	BIT(31)
+#define DWC3_GSNPSID_MASK	0xffff0000
+#define DWC3_GSNPSREV_MASK	0xffff
+#define DWC3_GSNPS_ID(p)	(((p) & DWC3_GSNPSID_MASK) >> 16)
+
+/* DWC3 registers memory space boundries */
+#define DWC3_XHCI_REGS_START		0x0
+#define DWC3_XHCI_REGS_END		0x7fff
+#define DWC3_GLOBALS_REGS_START		0xc100
+#define DWC3_GLOBALS_REGS_END		0xc6ff
+#define DWC3_DEVICE_REGS_START		0xc700
+#define DWC3_DEVICE_REGS_END		0xcbff
+#define DWC3_OTG_REGS_START		0xcc00
+#define DWC3_OTG_REGS_END		0xccff
+
+/* Global Registers */
+#define DWC3_GSBUSCFG0		0xc100
+#define DWC3_GSBUSCFG1		0xc104
+#define DWC3_GTXTHRCFG		0xc108
+#define DWC3_GRXTHRCFG		0xc10c
+#define DWC3_GCTL		0xc110
+#define DWC3_GEVTEN		0xc114
+#define DWC3_GSTS		0xc118
+#define DWC3_GUCTL1		0xc11c
+#define DWC3_GSNPSID		0xc120
+#define DWC3_GGPIO		0xc124
+#define DWC3_GUID		0xc128
+#define DWC3_GUCTL		0xc12c
+#define DWC3_GBUSERRADDR0	0xc130
+#define DWC3_GBUSERRADDR1	0xc134
+#define DWC3_GPRTBIMAP0		0xc138
+#define DWC3_GPRTBIMAP1		0xc13c
+#define DWC3_GHWPARAMS0		0xc140
+#define DWC3_GHWPARAMS1		0xc144
+#define DWC3_GHWPARAMS2		0xc148
+#define DWC3_GHWPARAMS3		0xc14c
+#define DWC3_GHWPARAMS4		0xc150
+#define DWC3_GHWPARAMS5		0xc154
+#define DWC3_GHWPARAMS6		0xc158
+#define DWC3_GHWPARAMS7		0xc15c
+#define DWC3_GDBGFIFOSPACE	0xc160
+#define DWC3_GDBGLTSSM		0xc164
+#define DWC3_GDBGBMU		0xc16c
+#define DWC3_GDBGLSPMUX		0xc170
+#define DWC3_GDBGLSP		0xc174
+#define DWC3_GDBGEPINFO0	0xc178
+#define DWC3_GDBGEPINFO1	0xc17c
+#define DWC3_GPRTBIMAP_HS0	0xc180
+#define DWC3_GPRTBIMAP_HS1	0xc184
+#define DWC3_GPRTBIMAP_FS0	0xc188
+#define DWC3_GPRTBIMAP_FS1	0xc18c
+#define DWC3_GUCTL2		0xc19c
+
+#define DWC3_VER_NUMBER		0xc1a0
+#define DWC3_VER_TYPE		0xc1a4
+
+#define DWC3_GUSB2PHYCFG(n)	(0xc200 + ((n) * 0x04))
+#define DWC3_GUSB2I2CCTL(n)	(0xc240 + ((n) * 0x04))
+
+#define DWC3_GUSB2PHYACC(n)	(0xc280 + ((n) * 0x04))
+
+#define DWC3_GUSB3PIPECTL(n)	(0xc2c0 + ((n) * 0x04))
+
+#define DWC3_GTXFIFOSIZ(n)	(0xc300 + ((n) * 0x04))
+#define DWC3_GRXFIFOSIZ(n)	(0xc380 + ((n) * 0x04))
+
+#define DWC3_GEVNTADRLO(n)	(0xc400 + ((n) * 0x10))
+#define DWC3_GEVNTADRHI(n)	(0xc404 + ((n) * 0x10))
+#define DWC3_GEVNTSIZ(n)	(0xc408 + ((n) * 0x10))
+#define DWC3_GEVNTCOUNT(n)	(0xc40c + ((n) * 0x10))
+
+#define DWC3_GHWPARAMS8		0xc600
+#define DWC3_GUCTL3		0xc60c
+#define DWC3_GFLADJ		0xc630
+#define DWC3_GHWPARAMS9		0xc6e0
+
+/* Device Registers */
+#define DWC3_DCFG		0xc700
+#define DWC3_DCTL		0xc704
+#define DWC3_DEVTEN		0xc708
+#define DWC3_DSTS		0xc70c
+#define DWC3_DGCMDPAR		0xc710
+#define DWC3_DGCMD		0xc714
+#define DWC3_DALEPENA		0xc720
+#define DWC3_DCFG1		0xc740 /* DWC_usb32 only */
+
+#define DWC3_DEP_BASE(n)	(0xc800 + ((n) * 0x10))
+#define DWC3_DEPCMDPAR2		0x00
+#define DWC3_DEPCMDPAR1		0x04
+#define DWC3_DEPCMDPAR0		0x08
+#define DWC3_DEPCMD		0x0c
+
+#define DWC3_DEV_IMOD(n)	(0xca00 + ((n) * 0x4))
+
+/* OTG Registers */
+#define DWC3_OCFG		0xcc00
+#define DWC3_OCTL		0xcc04
+#define DWC3_OEVT		0xcc08
+#define DWC3_OEVTEN		0xcc0C
+#define DWC3_OSTS		0xcc10
+
+/* Bit fields */
+
+/* Global SoC Bus Configuration INCRx Register 0 */
+#define DWC3_GSBUSCFG0_INCR256BRSTENA	(1 << 7) /* INCR256 burst */
+#define DWC3_GSBUSCFG0_INCR128BRSTENA	(1 << 6) /* INCR128 burst */
+#define DWC3_GSBUSCFG0_INCR64BRSTENA	(1 << 5) /* INCR64 burst */
+#define DWC3_GSBUSCFG0_INCR32BRSTENA	(1 << 4) /* INCR32 burst */
+#define DWC3_GSBUSCFG0_INCR16BRSTENA	(1 << 3) /* INCR16 burst */
+#define DWC3_GSBUSCFG0_INCR8BRSTENA	(1 << 2) /* INCR8 burst */
+#define DWC3_GSBUSCFG0_INCR4BRSTENA	(1 << 1) /* INCR4 burst */
+#define DWC3_GSBUSCFG0_INCRBRSTENA	(1 << 0) /* undefined length enable */
+#define DWC3_GSBUSCFG0_INCRBRST_MASK	0xff
+
+/* Global Debug LSP MUX Select */
+#define DWC3_GDBGLSPMUX_ENDBC		BIT(15)	/* Host only */
+#define DWC3_GDBGLSPMUX_HOSTSELECT(n)	((n) & 0x3fff)
+#define DWC3_GDBGLSPMUX_DEVSELECT(n)	(((n) & 0xf) << 4)
+#define DWC3_GDBGLSPMUX_EPSELECT(n)	((n) & 0xf)
+
+/* Global Debug Queue/FIFO Space Available Register */
+#define DWC3_GDBGFIFOSPACE_NUM(n)	((n) & 0x1f)
+#define DWC3_GDBGFIFOSPACE_TYPE(n)	(((n) << 5) & 0x1e0)
+#define DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(n) (((n) >> 16) & 0xffff)
+
+#define DWC3_TXFIFO		0
+#define DWC3_RXFIFO		1
+#define DWC3_TXREQQ		2
+#define DWC3_RXREQQ		3
+#define DWC3_RXINFOQ		4
+#define DWC3_PSTATQ		5
+#define DWC3_DESCFETCHQ		6
+#define DWC3_EVENTQ		7
+#define DWC3_AUXEVENTQ		8
+
+/* Global RX Threshold Configuration Register */
+#define DWC3_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 19)
+#define DWC3_GRXTHRCFG_RXPKTCNT(n) (((n) & 0xf) << 24)
+#define DWC3_GRXTHRCFG_PKTCNTSEL BIT(29)
+
+/* Global TX Threshold Configuration Register */
+#define DWC3_GTXTHRCFG_MAXTXBURSTSIZE(n) (((n) & 0xff) << 16)
+#define DWC3_GTXTHRCFG_TXPKTCNT(n) (((n) & 0xf) << 24)
+#define DWC3_GTXTHRCFG_PKTCNTSEL BIT(29)
+
+/* Global RX Threshold Configuration Register for DWC_usb31 only */
+#define DWC31_GRXTHRCFG_MAXRXBURSTSIZE(n)	(((n) & 0x1f) << 16)
+#define DWC31_GRXTHRCFG_RXPKTCNT(n)		(((n) & 0x1f) << 21)
+#define DWC31_GRXTHRCFG_PKTCNTSEL		BIT(26)
+#define DWC31_RXTHRNUMPKTSEL_HS_PRD		BIT(15)
+#define DWC31_RXTHRNUMPKT_HS_PRD(n)		(((n) & 0x3) << 13)
+#define DWC31_RXTHRNUMPKTSEL_PRD		BIT(10)
+#define DWC31_RXTHRNUMPKT_PRD(n)		(((n) & 0x1f) << 5)
+#define DWC31_MAXRXBURSTSIZE_PRD(n)		((n) & 0x1f)
+
+/* Global TX Threshold Configuration Register for DWC_usb31 only */
+#define DWC31_GTXTHRCFG_MAXTXBURSTSIZE(n)	(((n) & 0x1f) << 16)
+#define DWC31_GTXTHRCFG_TXPKTCNT(n)		(((n) & 0x1f) << 21)
+#define DWC31_GTXTHRCFG_PKTCNTSEL		BIT(26)
+#define DWC31_TXTHRNUMPKTSEL_HS_PRD		BIT(15)
+#define DWC31_TXTHRNUMPKT_HS_PRD(n)		(((n) & 0x3) << 13)
+#define DWC31_TXTHRNUMPKTSEL_PRD		BIT(10)
+#define DWC31_TXTHRNUMPKT_PRD(n)		(((n) & 0x1f) << 5)
+#define DWC31_MAXTXBURSTSIZE_PRD(n)		((n) & 0x1f)
+
+/* Global Configuration Register */
+#define DWC3_GCTL_PWRDNSCALE(n)	((n) << 19)
+#define DWC3_GCTL_PWRDNSCALE_MASK	GENMASK(31, 19)
+#define DWC3_GCTL_U2RSTECN	BIT(16)
+#define DWC3_GCTL_RAMCLKSEL(x)	(((x) & DWC3_GCTL_CLK_MASK) << 6)
+#define DWC3_GCTL_CLK_BUS	(0)
+#define DWC3_GCTL_CLK_PIPE	(1)
+#define DWC3_GCTL_CLK_PIPEHALF	(2)
+#define DWC3_GCTL_CLK_MASK	(3)
+
+#define DWC3_GCTL_PRTCAP(n)	(((n) & (3 << 12)) >> 12)
+#define DWC3_GCTL_PRTCAPDIR(n)	((n) << 12)
+#define DWC3_GCTL_PRTCAP_HOST	1
+#define DWC3_GCTL_PRTCAP_DEVICE	2
+#define DWC3_GCTL_PRTCAP_OTG	3
+
+#define DWC3_GCTL_CORESOFTRESET		BIT(11)
+#define DWC3_GCTL_SOFITPSYNC		BIT(10)
+#define DWC3_GCTL_SCALEDOWN(n)		((n) << 4)
+#define DWC3_GCTL_SCALEDOWN_MASK	DWC3_GCTL_SCALEDOWN(3)
+#define DWC3_GCTL_DISSCRAMBLE		BIT(3)
+#define DWC3_GCTL_U2EXIT_LFPS		BIT(2)
+#define DWC3_GCTL_GBLHIBERNATIONEN	BIT(1)
+#define DWC3_GCTL_DSBLCLKGTNG		BIT(0)
+
+/* Global User Control 1 Register */
+#define DWC3_GUCTL1_DEV_DECOUPLE_L1L2_EVT	BIT(31)
+#define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS	BIT(28)
+#define DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK	BIT(26)
+#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW		BIT(24)
+#define DWC3_GUCTL1_PARKMODE_DISABLE_SS		BIT(17)
+#define DWC3_GUCTL1_RESUME_OPMODE_HS_HOST	BIT(10)
+
+/* Global Status Register */
+#define DWC3_GSTS_OTG_IP	BIT(10)
+#define DWC3_GSTS_BC_IP		BIT(9)
+#define DWC3_GSTS_ADP_IP	BIT(8)
+#define DWC3_GSTS_HOST_IP	BIT(7)
+#define DWC3_GSTS_DEVICE_IP	BIT(6)
+#define DWC3_GSTS_CSR_TIMEOUT	BIT(5)
+#define DWC3_GSTS_BUS_ERR_ADDR_VLD	BIT(4)
+#define DWC3_GSTS_CURMOD(n)	((n) & 0x3)
+#define DWC3_GSTS_CURMOD_DEVICE	0
+#define DWC3_GSTS_CURMOD_HOST	1
+
+/* Global USB2 PHY Configuration Register */
+#define DWC3_GUSB2PHYCFG_PHYSOFTRST	BIT(31)
+#define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS	BIT(30)
+#define DWC3_GUSB2PHYCFG_SUSPHY		BIT(6)
+#define DWC3_GUSB2PHYCFG_ULPI_UTMI	BIT(4)
+#define DWC3_GUSB2PHYCFG_ENBLSLPM	BIT(8)
+#define DWC3_GUSB2PHYCFG_PHYIF(n)	(n << 3)
+#define DWC3_GUSB2PHYCFG_PHYIF_MASK	DWC3_GUSB2PHYCFG_PHYIF(1)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM(n)	(n << 10)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK	DWC3_GUSB2PHYCFG_USBTRDTIM(0xf)
+#define USBTRDTIM_UTMI_8_BIT		9
+#define USBTRDTIM_UTMI_16_BIT		5
+#define UTMI_PHYIF_16_BIT		1
+#define UTMI_PHYIF_8_BIT		0
+
+/* Global USB2 PHY Vendor Control Register */
+#define DWC3_GUSB2PHYACC_NEWREGREQ	BIT(25)
+#define DWC3_GUSB2PHYACC_DONE		BIT(24)
+#define DWC3_GUSB2PHYACC_BUSY		BIT(23)
+#define DWC3_GUSB2PHYACC_WRITE		BIT(22)
+#define DWC3_GUSB2PHYACC_ADDR(n)	(n << 16)
+#define DWC3_GUSB2PHYACC_EXTEND_ADDR(n)	(n << 8)
+#define DWC3_GUSB2PHYACC_DATA(n)	(n & 0xff)
+
+/* Global USB3 PIPE Control Register */
+#define DWC3_GUSB3PIPECTL_PHYSOFTRST	BIT(31)
+#define DWC3_GUSB3PIPECTL_U2SSINP3OK	BIT(29)
+#define DWC3_GUSB3PIPECTL_DISRXDETINP3	BIT(28)
+#define DWC3_GUSB3PIPECTL_UX_EXIT_PX	BIT(27)
+#define DWC3_GUSB3PIPECTL_REQP1P2P3	BIT(24)
+#define DWC3_GUSB3PIPECTL_DEP1P2P3(n)	((n) << 19)
+#define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK	DWC3_GUSB3PIPECTL_DEP1P2P3(7)
+#define DWC3_GUSB3PIPECTL_DEP1P2P3_EN	DWC3_GUSB3PIPECTL_DEP1P2P3(1)
+#define DWC3_GUSB3PIPECTL_DEPOCHANGE	BIT(18)
+#define DWC3_GUSB3PIPECTL_SUSPHY	BIT(17)
+#define DWC3_GUSB3PIPECTL_LFPSFILT	BIT(9)
+#define DWC3_GUSB3PIPECTL_RX_DETOPOLL	BIT(8)
+#define DWC3_GUSB3PIPECTL_TX_DEEPH_MASK	DWC3_GUSB3PIPECTL_TX_DEEPH(3)
+#define DWC3_GUSB3PIPECTL_TX_DEEPH(n)	((n) << 1)
+
+/* Global TX Fifo Size Register */
+#define DWC31_GTXFIFOSIZ_TXFRAMNUM	BIT(15)		/* DWC_usb31 only */
+#define DWC31_GTXFIFOSIZ_TXFDEP(n)	((n) & 0x7fff)	/* DWC_usb31 only */
+#define DWC3_GTXFIFOSIZ_TXFDEP(n)	((n) & 0xffff)
+#define DWC3_GTXFIFOSIZ_TXFSTADDR(n)	((n) & 0xffff0000)
+
+/* Global RX Fifo Size Register */
+#define DWC31_GRXFIFOSIZ_RXFDEP(n)	((n) & 0x7fff)	/* DWC_usb31 only */
+#define DWC3_GRXFIFOSIZ_RXFDEP(n)	((n) & 0xffff)
+
+/* Global Event Size Registers */
+#define DWC3_GEVNTSIZ_INTMASK		BIT(31)
+#define DWC3_GEVNTSIZ_SIZE(n)		((n) & 0xffff)
+
+/* Global HWPARAMS0 Register */
+#define DWC3_GHWPARAMS0_MODE(n)		((n) & 0x3)
+#define DWC3_GHWPARAMS0_MODE_GADGET	0
+#define DWC3_GHWPARAMS0_MODE_HOST	1
+#define DWC3_GHWPARAMS0_MODE_DRD	2
+#define DWC3_GHWPARAMS0_MBUS_TYPE(n)	(((n) >> 3) & 0x7)
+#define DWC3_GHWPARAMS0_SBUS_TYPE(n)	(((n) >> 6) & 0x3)
+#define DWC3_GHWPARAMS0_MDWIDTH(n)	(((n) >> 8) & 0xff)
+#define DWC3_GHWPARAMS0_SDWIDTH(n)	(((n) >> 16) & 0xff)
+#define DWC3_GHWPARAMS0_AWIDTH(n)	(((n) >> 24) & 0xff)
+
+/* Global HWPARAMS1 Register */
+#define DWC3_GHWPARAMS1_EN_PWROPT(n)	(((n) & (3 << 24)) >> 24)
+#define DWC3_GHWPARAMS1_EN_PWROPT_NO	0
+#define DWC3_GHWPARAMS1_EN_PWROPT_CLK	1
+#define DWC3_GHWPARAMS1_EN_PWROPT_HIB	2
+#define DWC3_GHWPARAMS1_PWROPT(n)	((n) << 24)
+#define DWC3_GHWPARAMS1_PWROPT_MASK	DWC3_GHWPARAMS1_PWROPT(3)
+#define DWC3_GHWPARAMS1_ENDBC		BIT(31)
+
+/* Global HWPARAMS3 Register */
+#define DWC3_GHWPARAMS3_SSPHY_IFC(n)		((n) & 3)
+#define DWC3_GHWPARAMS3_SSPHY_IFC_DIS		0
+#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN1		1
+#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN2		2 /* DWC_usb31 only */
+#define DWC3_GHWPARAMS3_HSPHY_IFC(n)		(((n) & (3 << 2)) >> 2)
+#define DWC3_GHWPARAMS3_HSPHY_IFC_DIS		0
+#define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI		1
+#define DWC3_GHWPARAMS3_HSPHY_IFC_ULPI		2
+#define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI	3
+#define DWC3_GHWPARAMS3_FSPHY_IFC(n)		(((n) & (3 << 4)) >> 4)
+#define DWC3_GHWPARAMS3_FSPHY_IFC_DIS		0
+#define DWC3_GHWPARAMS3_FSPHY_IFC_ENA		1
+
+/* Global HWPARAMS4 Register */
+#define DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(n)	(((n) & (0x0f << 13)) >> 13)
+#define DWC3_MAX_HIBER_SCRATCHBUFS		15
+
+/* Global HWPARAMS6 Register */
+#define DWC3_GHWPARAMS6_BCSUPPORT		BIT(14)
+#define DWC3_GHWPARAMS6_OTG3SUPPORT		BIT(13)
+#define DWC3_GHWPARAMS6_ADPSUPPORT		BIT(12)
+#define DWC3_GHWPARAMS6_HNPSUPPORT		BIT(11)
+#define DWC3_GHWPARAMS6_SRPSUPPORT		BIT(10)
+#define DWC3_GHWPARAMS6_EN_FPGA			BIT(7)
+
+/* DWC_usb32 only */
+#define DWC3_GHWPARAMS6_MDWIDTH(n)		((n) & (0x3 << 8))
+
+/* Global HWPARAMS7 Register */
+#define DWC3_GHWPARAMS7_RAM1_DEPTH(n)	((n) & 0xffff)
+#define DWC3_GHWPARAMS7_RAM2_DEPTH(n)	(((n) >> 16) & 0xffff)
+
+/* Global HWPARAMS9 Register */
+#define DWC3_GHWPARAMS9_DEV_TXF_FLUSH_BYPASS	BIT(0)
+#define DWC3_GHWPARAMS9_DEV_MST			BIT(1)
+
+/* Global Frame Length Adjustment Register */
+#define DWC3_GFLADJ_30MHZ_SDBND_SEL		BIT(7)
+#define DWC3_GFLADJ_30MHZ_MASK			0x3f
+#define DWC3_GFLADJ_REFCLK_FLADJ_MASK		GENMASK(21, 8)
+#define DWC3_GFLADJ_REFCLK_LPM_SEL		BIT(23)
+#define DWC3_GFLADJ_240MHZDECR			GENMASK(30, 24)
+#define DWC3_GFLADJ_240MHZDECR_PLS1		BIT(31)
+
+/* Global User Control Register*/
+#define DWC3_GUCTL_REFCLKPER_MASK		0xffc00000
+#define DWC3_GUCTL_REFCLKPER_SEL		22
+
+/* Global User Control Register 2 */
+#define DWC3_GUCTL2_RST_ACTBITLATER		BIT(14)
+
+/* Global User Control Register 3 */
+#define DWC3_GUCTL3_SPLITDISABLE		BIT(14)
+
+/* Device Configuration Register */
+#define DWC3_DCFG_NUMLANES(n)	(((n) & 0x3) << 30) /* DWC_usb32 only */
+
+#define DWC3_DCFG_DEVADDR(addr)	((addr) << 3)
+#define DWC3_DCFG_DEVADDR_MASK	DWC3_DCFG_DEVADDR(0x7f)
+
+#define DWC3_DCFG_SPEED_MASK	(7 << 0)
+#define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0)  /* DWC_usb31 only */
+#define DWC3_DCFG_SUPERSPEED	(4 << 0)
+#define DWC3_DCFG_HIGHSPEED	(0 << 0)
+#define DWC3_DCFG_FULLSPEED	BIT(0)
+
+#define DWC3_DCFG_NUMP_SHIFT	17
+#define DWC3_DCFG_NUMP(n)	(((n) >> DWC3_DCFG_NUMP_SHIFT) & 0x1f)
+#define DWC3_DCFG_NUMP_MASK	(0x1f << DWC3_DCFG_NUMP_SHIFT)
+#define DWC3_DCFG_LPM_CAP	BIT(22)
+#define DWC3_DCFG_IGNSTRMPP	BIT(23)
+
+/* Device Control Register */
+#define DWC3_DCTL_RUN_STOP	BIT(31)
+#define DWC3_DCTL_CSFTRST	BIT(30)
+#define DWC3_DCTL_LSFTRST	BIT(29)
+
+#define DWC3_DCTL_HIRD_THRES_MASK	(0x1f << 24)
+#define DWC3_DCTL_HIRD_THRES(n)	((n) << 24)
+
+#define DWC3_DCTL_APPL1RES	BIT(23)
+
+/* These apply for core versions 1.87a and earlier */
+#define DWC3_DCTL_TRGTULST_MASK		(0x0f << 17)
+#define DWC3_DCTL_TRGTULST(n)		((n) << 17)
+#define DWC3_DCTL_TRGTULST_U2		(DWC3_DCTL_TRGTULST(2))
+#define DWC3_DCTL_TRGTULST_U3		(DWC3_DCTL_TRGTULST(3))
+#define DWC3_DCTL_TRGTULST_SS_DIS	(DWC3_DCTL_TRGTULST(4))
+#define DWC3_DCTL_TRGTULST_RX_DET	(DWC3_DCTL_TRGTULST(5))
+#define DWC3_DCTL_TRGTULST_SS_INACT	(DWC3_DCTL_TRGTULST(6))
+
+/* These apply for core versions 1.94a and later */
+#define DWC3_DCTL_NYET_THRES(n)		(((n) & 0xf) << 20)
+
+#define DWC3_DCTL_KEEP_CONNECT		BIT(19)
+#define DWC3_DCTL_L1_HIBER_EN		BIT(18)
+#define DWC3_DCTL_CRS			BIT(17)
+#define DWC3_DCTL_CSS			BIT(16)
+
+#define DWC3_DCTL_INITU2ENA		BIT(12)
+#define DWC3_DCTL_ACCEPTU2ENA		BIT(11)
+#define DWC3_DCTL_INITU1ENA		BIT(10)
+#define DWC3_DCTL_ACCEPTU1ENA		BIT(9)
+#define DWC3_DCTL_TSTCTRL_MASK		(0xf << 1)
+
+#define DWC3_DCTL_ULSTCHNGREQ_MASK	(0x0f << 5)
+#define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK)
+
+#define DWC3_DCTL_ULSTCHNG_NO_ACTION	(DWC3_DCTL_ULSTCHNGREQ(0))
+#define DWC3_DCTL_ULSTCHNG_SS_DISABLED	(DWC3_DCTL_ULSTCHNGREQ(4))
+#define DWC3_DCTL_ULSTCHNG_RX_DETECT	(DWC3_DCTL_ULSTCHNGREQ(5))
+#define DWC3_DCTL_ULSTCHNG_SS_INACTIVE	(DWC3_DCTL_ULSTCHNGREQ(6))
+#define DWC3_DCTL_ULSTCHNG_RECOVERY	(DWC3_DCTL_ULSTCHNGREQ(8))
+#define DWC3_DCTL_ULSTCHNG_COMPLIANCE	(DWC3_DCTL_ULSTCHNGREQ(10))
+#define DWC3_DCTL_ULSTCHNG_LOOPBACK	(DWC3_DCTL_ULSTCHNGREQ(11))
+
+/* Device Event Enable Register */
+#define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN	BIT(12)
+#define DWC3_DEVTEN_EVNTOVERFLOWEN	BIT(11)
+#define DWC3_DEVTEN_CMDCMPLTEN		BIT(10)
+#define DWC3_DEVTEN_ERRTICERREN		BIT(9)
+#define DWC3_DEVTEN_SOFEN		BIT(7)
+#define DWC3_DEVTEN_U3L2L1SUSPEN	BIT(6)
+#define DWC3_DEVTEN_HIBERNATIONREQEVTEN	BIT(5)
+#define DWC3_DEVTEN_WKUPEVTEN		BIT(4)
+#define DWC3_DEVTEN_ULSTCNGEN		BIT(3)
+#define DWC3_DEVTEN_CONNECTDONEEN	BIT(2)
+#define DWC3_DEVTEN_USBRSTEN		BIT(1)
+#define DWC3_DEVTEN_DISCONNEVTEN	BIT(0)
+
+#define DWC3_DSTS_CONNLANES(n)		(((n) >> 30) & 0x3) /* DWC_usb32 only */
+
+/* Device Status Register */
+#define DWC3_DSTS_DCNRD			BIT(29)
+
+/* This applies for core versions 1.87a and earlier */
+#define DWC3_DSTS_PWRUPREQ		BIT(24)
+
+/* These apply for core versions 1.94a and later */
+#define DWC3_DSTS_RSS			BIT(25)
+#define DWC3_DSTS_SSS			BIT(24)
+
+#define DWC3_DSTS_COREIDLE		BIT(23)
+#define DWC3_DSTS_DEVCTRLHLT		BIT(22)
+
+#define DWC3_DSTS_USBLNKST_MASK		(0x0f << 18)
+#define DWC3_DSTS_USBLNKST(n)		(((n) & DWC3_DSTS_USBLNKST_MASK) >> 18)
+
+#define DWC3_DSTS_RXFIFOEMPTY		BIT(17)
+
+#define DWC3_DSTS_SOFFN_MASK		(0x3fff << 3)
+#define DWC3_DSTS_SOFFN(n)		(((n) & DWC3_DSTS_SOFFN_MASK) >> 3)
+
+#define DWC3_DSTS_CONNECTSPD		(7 << 0)
+
+#define DWC3_DSTS_SUPERSPEED_PLUS	(5 << 0) /* DWC_usb31 only */
+#define DWC3_DSTS_SUPERSPEED		(4 << 0)
+#define DWC3_DSTS_HIGHSPEED		(0 << 0)
+#define DWC3_DSTS_FULLSPEED		BIT(0)
+
+/* Device Generic Command Register */
+#define DWC3_DGCMD_SET_LMP		0x01
+#define DWC3_DGCMD_SET_PERIODIC_PAR	0x02
+#define DWC3_DGCMD_XMIT_FUNCTION	0x03
+
+/* These apply for core versions 1.94a and later */
+#define DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO	0x04
+#define DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI	0x05
+
+#define DWC3_DGCMD_SELECTED_FIFO_FLUSH	0x09
+#define DWC3_DGCMD_ALL_FIFO_FLUSH	0x0a
+#define DWC3_DGCMD_SET_ENDPOINT_NRDY	0x0c
+#define DWC3_DGCMD_SET_ENDPOINT_PRIME	0x0d
+#define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK	0x10
+
+#define DWC3_DGCMD_STATUS(n)		(((n) >> 12) & 0x0F)
+#define DWC3_DGCMD_CMDACT		BIT(10)
+#define DWC3_DGCMD_CMDIOC		BIT(8)
+
+/* Device Generic Command Parameter Register */
+#define DWC3_DGCMDPAR_FORCE_LINKPM_ACCEPT	BIT(0)
+#define DWC3_DGCMDPAR_FIFO_NUM(n)		((n) << 0)
+#define DWC3_DGCMDPAR_RX_FIFO			(0 << 5)
+#define DWC3_DGCMDPAR_TX_FIFO			BIT(5)
+#define DWC3_DGCMDPAR_LOOPBACK_DIS		(0 << 0)
+#define DWC3_DGCMDPAR_LOOPBACK_ENA		BIT(0)
+
+/* Device Endpoint Command Register */
+#define DWC3_DEPCMD_PARAM_SHIFT		16
+#define DWC3_DEPCMD_PARAM(x)		((x) << DWC3_DEPCMD_PARAM_SHIFT)
+#define DWC3_DEPCMD_GET_RSC_IDX(x)	(((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
+#define DWC3_DEPCMD_STATUS(x)		(((x) >> 12) & 0x0F)
+#define DWC3_DEPCMD_HIPRI_FORCERM	BIT(11)
+#define DWC3_DEPCMD_CLEARPENDIN		BIT(11)
+#define DWC3_DEPCMD_CMDACT		BIT(10)
+#define DWC3_DEPCMD_CMDIOC		BIT(8)
+
+#define DWC3_DEPCMD_DEPSTARTCFG		(0x09 << 0)
+#define DWC3_DEPCMD_ENDTRANSFER		(0x08 << 0)
+#define DWC3_DEPCMD_UPDATETRANSFER	(0x07 << 0)
+#define DWC3_DEPCMD_STARTTRANSFER	(0x06 << 0)
+#define DWC3_DEPCMD_CLEARSTALL		(0x05 << 0)
+#define DWC3_DEPCMD_SETSTALL		(0x04 << 0)
+/* This applies for core versions 1.90a and earlier */
+#define DWC3_DEPCMD_GETSEQNUMBER	(0x03 << 0)
+/* This applies for core versions 1.94a and later */
+#define DWC3_DEPCMD_GETEPSTATE		(0x03 << 0)
+#define DWC3_DEPCMD_SETTRANSFRESOURCE	(0x02 << 0)
+#define DWC3_DEPCMD_SETEPCONFIG		(0x01 << 0)
+
+#define DWC3_DEPCMD_CMD(x)		((x) & 0xf)
+
+/* The EP number goes 0..31 so ep0 is always out and ep1 is always in */
+#define DWC3_DALEPENA_EP(n)		BIT(n)
+
+/* DWC_usb32 DCFG1 config */
+#define DWC3_DCFG1_DIS_MST_ENH		BIT(1)
+
+#define DWC3_DEPCMD_TYPE_CONTROL	0
+#define DWC3_DEPCMD_TYPE_ISOC		1
+#define DWC3_DEPCMD_TYPE_BULK		2
+#define DWC3_DEPCMD_TYPE_INTR		3
+
+#define DWC3_DEV_IMOD_COUNT_SHIFT	16
+#define DWC3_DEV_IMOD_COUNT_MASK	(0xffff << 16)
+#define DWC3_DEV_IMOD_INTERVAL_SHIFT	0
+#define DWC3_DEV_IMOD_INTERVAL_MASK	(0xffff << 0)
+
+/* OTG Configuration Register */
+#define DWC3_OCFG_DISPWRCUTTOFF		BIT(5)
+#define DWC3_OCFG_HIBDISMASK		BIT(4)
+#define DWC3_OCFG_SFTRSTMASK		BIT(3)
+#define DWC3_OCFG_OTGVERSION		BIT(2)
+#define DWC3_OCFG_HNPCAP		BIT(1)
+#define DWC3_OCFG_SRPCAP		BIT(0)
+
+/* OTG CTL Register */
+#define DWC3_OCTL_OTG3GOERR		BIT(7)
+#define DWC3_OCTL_PERIMODE		BIT(6)
+#define DWC3_OCTL_PRTPWRCTL		BIT(5)
+#define DWC3_OCTL_HNPREQ		BIT(4)
+#define DWC3_OCTL_SESREQ		BIT(3)
+#define DWC3_OCTL_TERMSELIDPULSE	BIT(2)
+#define DWC3_OCTL_DEVSETHNPEN		BIT(1)
+#define DWC3_OCTL_HSTSETHNPEN		BIT(0)
+
+/* OTG Event Register */
+#define DWC3_OEVT_DEVICEMODE		BIT(31)
+#define DWC3_OEVT_XHCIRUNSTPSET		BIT(27)
+#define DWC3_OEVT_DEVRUNSTPSET		BIT(26)
+#define DWC3_OEVT_HIBENTRY		BIT(25)
+#define DWC3_OEVT_CONIDSTSCHNG		BIT(24)
+#define DWC3_OEVT_HRRCONFNOTIF		BIT(23)
+#define DWC3_OEVT_HRRINITNOTIF		BIT(22)
+#define DWC3_OEVT_ADEVIDLE		BIT(21)
+#define DWC3_OEVT_ADEVBHOSTEND		BIT(20)
+#define DWC3_OEVT_ADEVHOST		BIT(19)
+#define DWC3_OEVT_ADEVHNPCHNG		BIT(18)
+#define DWC3_OEVT_ADEVSRPDET		BIT(17)
+#define DWC3_OEVT_ADEVSESSENDDET	BIT(16)
+#define DWC3_OEVT_BDEVBHOSTEND		BIT(11)
+#define DWC3_OEVT_BDEVHNPCHNG		BIT(10)
+#define DWC3_OEVT_BDEVSESSVLDDET	BIT(9)
+#define DWC3_OEVT_BDEVVBUSCHNG		BIT(8)
+#define DWC3_OEVT_BSESSVLD		BIT(3)
+#define DWC3_OEVT_HSTNEGSTS		BIT(2)
+#define DWC3_OEVT_SESREQSTS		BIT(1)
+#define DWC3_OEVT_ERROR			BIT(0)
+
+/* OTG Event Enable Register */
+#define DWC3_OEVTEN_XHCIRUNSTPSETEN	BIT(27)
+#define DWC3_OEVTEN_DEVRUNSTPSETEN	BIT(26)
+#define DWC3_OEVTEN_HIBENTRYEN		BIT(25)
+#define DWC3_OEVTEN_CONIDSTSCHNGEN	BIT(24)
+#define DWC3_OEVTEN_HRRCONFNOTIFEN	BIT(23)
+#define DWC3_OEVTEN_HRRINITNOTIFEN	BIT(22)
+#define DWC3_OEVTEN_ADEVIDLEEN		BIT(21)
+#define DWC3_OEVTEN_ADEVBHOSTENDEN	BIT(20)
+#define DWC3_OEVTEN_ADEVHOSTEN		BIT(19)
+#define DWC3_OEVTEN_ADEVHNPCHNGEN	BIT(18)
+#define DWC3_OEVTEN_ADEVSRPDETEN	BIT(17)
+#define DWC3_OEVTEN_ADEVSESSENDDETEN	BIT(16)
+#define DWC3_OEVTEN_BDEVBHOSTENDEN	BIT(11)
+#define DWC3_OEVTEN_BDEVHNPCHNGEN	BIT(10)
+#define DWC3_OEVTEN_BDEVSESSVLDDETEN	BIT(9)
+#define DWC3_OEVTEN_BDEVVBUSCHNGEN	BIT(8)
+
+/* OTG Status Register */
+#define DWC3_OSTS_DEVRUNSTP		BIT(13)
+#define DWC3_OSTS_XHCIRUNSTP		BIT(12)
+#define DWC3_OSTS_PERIPHERALSTATE	BIT(4)
+#define DWC3_OSTS_XHCIPRTPOWER		BIT(3)
+#define DWC3_OSTS_BSESVLD		BIT(2)
+#define DWC3_OSTS_VBUSVLD		BIT(1)
+#define DWC3_OSTS_CONIDSTS		BIT(0)
+
+/* Structures */
+
+struct dwc3_trb;
+
+/**
+ * struct dwc3_event_buffer - Software event buffer representation
+ * @buf: _THE_ buffer
+ * @cache: The buffer cache used in the threaded interrupt
+ * @length: size of this buffer
+ * @lpos: event offset
+ * @count: cache of last read event count register
+ * @flags: flags related to this event buffer
+ * @dma: dma_addr_t
+ * @dwc: pointer to DWC controller
+ */
+struct dwc3_event_buffer {
+	void			*buf;
+	void			*cache;
+	unsigned int		length;
+	unsigned int		lpos;
+	unsigned int		count;
+	unsigned int		flags;
+
+#define DWC3_EVENT_PENDING	BIT(0)
+
+	dma_addr_t		dma;
+
+	struct dwc3		*dwc;
+};
+
+#define DWC3_EP_FLAG_STALLED	BIT(0)
+#define DWC3_EP_FLAG_WEDGED	BIT(1)
+
+#define DWC3_EP_DIRECTION_TX	true
+#define DWC3_EP_DIRECTION_RX	false
+
+#define DWC3_TRB_NUM		256
+
+/**
+ * struct dwc3_ep - device side endpoint representation
+ * @endpoint: usb endpoint
+ * @cancelled_list: list of cancelled requests for this endpoint
+ * @pending_list: list of pending requests for this endpoint
+ * @started_list: list of started requests on this endpoint
+ * @regs: pointer to first endpoint register
+ * @trb_pool: array of transaction buffers
+ * @trb_pool_dma: dma address of @trb_pool
+ * @trb_enqueue: enqueue 'pointer' into TRB array
+ * @trb_dequeue: dequeue 'pointer' into TRB array
+ * @dwc: pointer to DWC controller
+ * @saved_state: ep state saved during hibernation
+ * @flags: endpoint flags (wedged, stalled, ...)
+ * @number: endpoint number (1 - 15)
+ * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK
+ * @resource_index: Resource transfer index
+ * @frame_number: set to the frame number we want this transfer to start (ISOC)
+ * @interval: the interval on which the ISOC transfer is started
+ * @name: a human readable name e.g. ep1out-bulk
+ * @direction: true for TX, false for RX
+ * @stream_capable: true when streams are enabled
+ * @combo_num: the test combination BIT[15:14] of the frame number to test
+ *		isochronous START TRANSFER command failure workaround
+ * @start_cmd_status: the status of testing START TRANSFER command with
+ *		combo_num = 'b00
+ */
+struct dwc3_ep {
+	struct usb_ep		endpoint;
+	struct list_head	cancelled_list;
+	struct list_head	pending_list;
+	struct list_head	started_list;
+
+	void __iomem		*regs;
+
+	struct dwc3_trb		*trb_pool;
+	dma_addr_t		trb_pool_dma;
+	struct dwc3		*dwc;
+
+	u32			saved_state;
+	unsigned int		flags;
+#define DWC3_EP_ENABLED			BIT(0)
+#define DWC3_EP_STALL			BIT(1)
+#define DWC3_EP_WEDGE			BIT(2)
+#define DWC3_EP_TRANSFER_STARTED	BIT(3)
+#define DWC3_EP_END_TRANSFER_PENDING	BIT(4)
+#define DWC3_EP_PENDING_REQUEST		BIT(5)
+#define DWC3_EP_DELAY_START		BIT(6)
+#define DWC3_EP_WAIT_TRANSFER_COMPLETE	BIT(7)
+#define DWC3_EP_IGNORE_NEXT_NOSTREAM	BIT(8)
+#define DWC3_EP_FORCE_RESTART_STREAM	BIT(9)
+#define DWC3_EP_FIRST_STREAM_PRIMED	BIT(10)
+#define DWC3_EP_PENDING_CLEAR_STALL	BIT(11)
+#define DWC3_EP_TXFIFO_RESIZED		BIT(12)
+#define DWC3_EP_DELAY_STOP             BIT(13)
+
+	/* This last one is specific to EP0 */
+#define DWC3_EP0_DIR_IN			BIT(31)
+
+	/*
+	 * IMPORTANT: we *know* we have 256 TRBs in our @trb_pool, so we will
+	 * use a u8 type here. If anybody decides to increase number of TRBs to
+	 * anything larger than 256 - I can't see why people would want to do
+	 * this though - then this type needs to be changed.
+	 *
+	 * By using u8 types we ensure that our % operator when incrementing
+	 * enqueue and dequeue get optimized away by the compiler.
+	 */
+	u8			trb_enqueue;
+	u8			trb_dequeue;
+
+	u8			number;
+	u8			type;
+	u8			resource_index;
+	u32			frame_number;
+	u32			interval;
+
+	char			name[20];
+
+	unsigned		direction:1;
+	unsigned		stream_capable:1;
+
+	/* For isochronous START TRANSFER workaround only */
+	u8			combo_num;
+	int			start_cmd_status;
+};
+
+enum dwc3_phy {
+	DWC3_PHY_UNKNOWN = 0,
+	DWC3_PHY_USB3,
+	DWC3_PHY_USB2,
+};
+
+enum dwc3_ep0_next {
+	DWC3_EP0_UNKNOWN = 0,
+	DWC3_EP0_COMPLETE,
+	DWC3_EP0_NRDY_DATA,
+	DWC3_EP0_NRDY_STATUS,
+};
+
+enum dwc3_ep0_state {
+	EP0_UNCONNECTED		= 0,
+	EP0_SETUP_PHASE,
+	EP0_DATA_PHASE,
+	EP0_STATUS_PHASE,
+};
+
+enum dwc3_link_state {
+	/* In SuperSpeed */
+	DWC3_LINK_STATE_U0		= 0x00, /* in HS, means ON */
+	DWC3_LINK_STATE_U1		= 0x01,
+	DWC3_LINK_STATE_U2		= 0x02, /* in HS, means SLEEP */
+	DWC3_LINK_STATE_U3		= 0x03, /* in HS, means SUSPEND */
+	DWC3_LINK_STATE_SS_DIS		= 0x04,
+	DWC3_LINK_STATE_RX_DET		= 0x05, /* in HS, means Early Suspend */
+	DWC3_LINK_STATE_SS_INACT	= 0x06,
+	DWC3_LINK_STATE_POLL		= 0x07,
+	DWC3_LINK_STATE_RECOV		= 0x08,
+	DWC3_LINK_STATE_HRESET		= 0x09,
+	DWC3_LINK_STATE_CMPLY		= 0x0a,
+	DWC3_LINK_STATE_LPBK		= 0x0b,
+	DWC3_LINK_STATE_RESET		= 0x0e,
+	DWC3_LINK_STATE_RESUME		= 0x0f,
+	DWC3_LINK_STATE_MASK		= 0x0f,
+};
+
+/* TRB Length, PCM and Status */
+#define DWC3_TRB_SIZE_MASK	(0x00ffffff)
+#define DWC3_TRB_SIZE_LENGTH(n)	((n) & DWC3_TRB_SIZE_MASK)
+#define DWC3_TRB_SIZE_PCM1(n)	(((n) & 0x03) << 24)
+#define DWC3_TRB_SIZE_TRBSTS(n)	(((n) & (0x0f << 28)) >> 28)
+
+#define DWC3_TRBSTS_OK			0
+#define DWC3_TRBSTS_MISSED_ISOC		1
+#define DWC3_TRBSTS_SETUP_PENDING	2
+#define DWC3_TRB_STS_XFER_IN_PROG	4
+
+/* TRB Control */
+#define DWC3_TRB_CTRL_HWO		BIT(0)
+#define DWC3_TRB_CTRL_LST		BIT(1)
+#define DWC3_TRB_CTRL_CHN		BIT(2)
+#define DWC3_TRB_CTRL_CSP		BIT(3)
+#define DWC3_TRB_CTRL_TRBCTL(n)		(((n) & 0x3f) << 4)
+#define DWC3_TRB_CTRL_ISP_IMI		BIT(10)
+#define DWC3_TRB_CTRL_IOC		BIT(11)
+#define DWC3_TRB_CTRL_SID_SOFN(n)	(((n) & 0xffff) << 14)
+#define DWC3_TRB_CTRL_GET_SID_SOFN(n)	(((n) & (0xffff << 14)) >> 14)
+
+#define DWC3_TRBCTL_TYPE(n)		((n) & (0x3f << 4))
+#define DWC3_TRBCTL_NORMAL		DWC3_TRB_CTRL_TRBCTL(1)
+#define DWC3_TRBCTL_CONTROL_SETUP	DWC3_TRB_CTRL_TRBCTL(2)
+#define DWC3_TRBCTL_CONTROL_STATUS2	DWC3_TRB_CTRL_TRBCTL(3)
+#define DWC3_TRBCTL_CONTROL_STATUS3	DWC3_TRB_CTRL_TRBCTL(4)
+#define DWC3_TRBCTL_CONTROL_DATA	DWC3_TRB_CTRL_TRBCTL(5)
+#define DWC3_TRBCTL_ISOCHRONOUS_FIRST	DWC3_TRB_CTRL_TRBCTL(6)
+#define DWC3_TRBCTL_ISOCHRONOUS		DWC3_TRB_CTRL_TRBCTL(7)
+#define DWC3_TRBCTL_LINK_TRB		DWC3_TRB_CTRL_TRBCTL(8)
+
+/**
+ * struct dwc3_trb - transfer request block (hw format)
+ * @bpl: DW0-3
+ * @bph: DW4-7
+ * @size: DW8-B
+ * @ctrl: DWC-F
+ */
+struct dwc3_trb {
+	u32		bpl;
+	u32		bph;
+	u32		size;
+	u32		ctrl;
+} __packed;
+
+/**
+ * struct dwc3_hwparams - copy of HWPARAMS registers
+ * @hwparams0: GHWPARAMS0
+ * @hwparams1: GHWPARAMS1
+ * @hwparams2: GHWPARAMS2
+ * @hwparams3: GHWPARAMS3
+ * @hwparams4: GHWPARAMS4
+ * @hwparams5: GHWPARAMS5
+ * @hwparams6: GHWPARAMS6
+ * @hwparams7: GHWPARAMS7
+ * @hwparams8: GHWPARAMS8
+ * @hwparams9: GHWPARAMS9
+ */
+struct dwc3_hwparams {
+	u32	hwparams0;
+	u32	hwparams1;
+	u32	hwparams2;
+	u32	hwparams3;
+	u32	hwparams4;
+	u32	hwparams5;
+	u32	hwparams6;
+	u32	hwparams7;
+	u32	hwparams8;
+	u32	hwparams9;
+};
+
+/* HWPARAMS0 */
+#define DWC3_MODE(n)		((n) & 0x7)
+
+/* HWPARAMS1 */
+#define DWC3_NUM_INT(n)		(((n) & (0x3f << 15)) >> 15)
+
+/* HWPARAMS3 */
+#define DWC3_NUM_IN_EPS_MASK	(0x1f << 18)
+#define DWC3_NUM_EPS_MASK	(0x3f << 12)
+#define DWC3_NUM_EPS(p)		(((p)->hwparams3 &		\
+			(DWC3_NUM_EPS_MASK)) >> 12)
+#define DWC3_NUM_IN_EPS(p)	(((p)->hwparams3 &		\
+			(DWC3_NUM_IN_EPS_MASK)) >> 18)
+
+/* HWPARAMS7 */
+#define DWC3_RAM1_DEPTH(n)	((n) & 0xffff)
+
+/* HWPARAMS9 */
+#define DWC3_MST_CAPABLE(p)	(!!((p)->hwparams9 &		\
+			DWC3_GHWPARAMS9_DEV_MST))
+
+/**
+ * struct dwc3_request - representation of a transfer request
+ * @request: struct usb_request to be transferred
+ * @list: a list_head used for request queueing
+ * @dep: struct dwc3_ep owning this request
+ * @sg: pointer to first incomplete sg
+ * @start_sg: pointer to the sg which should be queued next
+ * @num_pending_sgs: counter to pending sgs
+ * @num_queued_sgs: counter to the number of sgs which already got queued
+ * @remaining: amount of data remaining
+ * @status: internal dwc3 request status tracking
+ * @epnum: endpoint number to which this request refers
+ * @trb: pointer to struct dwc3_trb
+ * @trb_dma: DMA address of @trb
+ * @num_trbs: number of TRBs used by this request
+ * @needs_extra_trb: true when request needs one extra TRB (either due to ZLP
+ *	or unaligned OUT)
+ * @direction: IN or OUT direction flag
+ * @mapped: true when request has been dma-mapped
+ */
+struct dwc3_request {
+	struct usb_request	request;
+	struct list_head	list;
+	struct dwc3_ep		*dep;
+	struct scatterlist	*sg;
+	struct scatterlist	*start_sg;
+
+	unsigned int		num_pending_sgs;
+	unsigned int		num_queued_sgs;
+	unsigned int		remaining;
+
+	unsigned int		status;
+#define DWC3_REQUEST_STATUS_QUEUED		0
+#define DWC3_REQUEST_STATUS_STARTED		1
+#define DWC3_REQUEST_STATUS_DISCONNECTED	2
+#define DWC3_REQUEST_STATUS_DEQUEUED		3
+#define DWC3_REQUEST_STATUS_STALLED		4
+#define DWC3_REQUEST_STATUS_COMPLETED		5
+#define DWC3_REQUEST_STATUS_UNKNOWN		-1
+
+	u8			epnum;
+	struct dwc3_trb		*trb;
+	dma_addr_t		trb_dma;
+
+	unsigned int		num_trbs;
+
+	unsigned int		needs_extra_trb:1;
+	unsigned int		direction:1;
+	unsigned int		mapped:1;
+};
+
+/*
+ * struct dwc3_scratchpad_array - hibernation scratchpad array
+ * (format defined by hw)
+ */
+struct dwc3_scratchpad_array {
+	__le64	dma_adr[DWC3_MAX_HIBER_SCRATCHBUFS];
+};
+
+/**
+ * struct dwc3 - representation of our controller
+ * @drd_work: workqueue used for role swapping
+ * @ep0_trb: trb which is used for the ctrl_req
+ * @bounce: address of bounce buffer
+ * @scratchbuf: address of scratch buffer
+ * @setup_buf: used while precessing STD USB requests
+ * @ep0_trb_addr: dma address of @ep0_trb
+ * @bounce_addr: dma address of @bounce
+ * @ep0_usb_req: dummy req used while handling STD USB requests
+ * @scratch_addr: dma address of scratchbuf
+ * @ep0_in_setup: one control transfer is completed and enter setup phase
+ * @lock: for synchronizing
+ * @mutex: for mode switching
+ * @dev: pointer to our struct device
+ * @sysdev: pointer to the DMA-capable device
+ * @xhci: pointer to our xHCI child
+ * @xhci_resources: struct resources for our @xhci child
+ * @ev_buf: struct dwc3_event_buffer pointer
+ * @eps: endpoint array
+ * @gadget: device side representation of the peripheral controller
+ * @gadget_driver: pointer to the gadget driver
+ * @bus_clk: clock for accessing the registers
+ * @ref_clk: reference clock
+ * @susp_clk: clock used when the SS phy is in low power (S3) state
+ * @reset: reset control
+ * @regs: base address for our registers
+ * @regs_size: address space size
+ * @fladj: frame length adjustment
+ * @ref_clk_per: reference clock period configuration
+ * @irq_gadget: peripheral controller's IRQ number
+ * @otg_irq: IRQ number for OTG IRQs
+ * @current_otg_role: current role of operation while using the OTG block
+ * @desired_otg_role: desired role of operation while using the OTG block
+ * @otg_restart_host: flag that OTG controller needs to restart host
+ * @nr_scratch: number of scratch buffers
+ * @u1u2: only used on revisions <1.83a for workaround
+ * @maximum_speed: maximum speed requested (mainly for testing purposes)
+ * @max_ssp_rate: SuperSpeed Plus maximum signaling rate and lane count
+ * @gadget_max_speed: maximum gadget speed requested
+ * @gadget_ssp_rate: Gadget driver's maximum supported SuperSpeed Plus signaling
+ *			rate and lane count.
+ * @ip: controller's ID
+ * @revision: controller's version of an IP
+ * @version_type: VERSIONTYPE register contents, a sub release of a revision
+ * @dr_mode: requested mode of operation
+ * @current_dr_role: current role of operation when in dual-role mode
+ * @desired_dr_role: desired role of operation when in dual-role mode
+ * @edev: extcon handle
+ * @edev_nb: extcon notifier
+ * @hsphy_mode: UTMI phy mode, one of following:
+ *		- USBPHY_INTERFACE_MODE_UTMI
+ *		- USBPHY_INTERFACE_MODE_UTMIW
+ * @role_sw: usb_role_switch handle
+ * @role_switch_default_mode: default operation mode of controller while
+ *			usb role is USB_ROLE_NONE.
+ * @usb_psy: pointer to power supply interface.
+ * @usb2_phy: pointer to USB2 PHY
+ * @usb3_phy: pointer to USB3 PHY
+ * @usb2_generic_phy: pointer to USB2 PHY
+ * @usb3_generic_phy: pointer to USB3 PHY
+ * @phys_ready: flag to indicate that PHYs are ready
+ * @ulpi: pointer to ulpi interface
+ * @ulpi_ready: flag to indicate that ULPI is initialized
+ * @u2sel: parameter from Set SEL request.
+ * @u2pel: parameter from Set SEL request.
+ * @u1sel: parameter from Set SEL request.
+ * @u1pel: parameter from Set SEL request.
+ * @num_eps: number of endpoints
+ * @ep0_next_event: hold the next expected event
+ * @ep0state: state of endpoint zero
+ * @link_state: link state
+ * @speed: device speed (super, high, full, low)
+ * @hwparams: copy of hwparams registers
+ * @regset: debugfs pointer to regdump file
+ * @dbg_lsp_select: current debug lsp mux register selection
+ * @test_mode: true when we're entering a USB test mode
+ * @test_mode_nr: test feature selector
+ * @lpm_nyet_threshold: LPM NYET response threshold
+ * @hird_threshold: HIRD threshold
+ * @rx_thr_num_pkt: USB receive packet count
+ * @rx_max_burst: max USB receive burst size
+ * @tx_thr_num_pkt: USB transmit packet count
+ * @tx_max_burst: max USB transmit burst size
+ * @rx_thr_num_pkt_prd: periodic ESS receive packet count
+ * @rx_max_burst_prd: max periodic ESS receive burst size
+ * @tx_thr_num_pkt_prd: periodic ESS transmit packet count
+ * @tx_max_burst_prd: max periodic ESS transmit burst size
+ * @tx_fifo_resize_max_num: max number of fifos allocated during txfifo resize
+ * @clear_stall_protocol: endpoint number that requires a delayed status phase
+ * @hsphy_interface: "utmi" or "ulpi"
+ * @connected: true when we're connected to a host, false otherwise
+ * @softconnect: true when gadget connect is called, false when disconnect runs
+ * @delayed_status: true when gadget driver asks for delayed status
+ * @ep0_bounced: true when we used bounce buffer
+ * @ep0_expect_in: true when we expect a DATA IN transfer
+ * @has_hibernation: true when dwc3 was configured with Hibernation
+ * @sysdev_is_parent: true when dwc3 device has a parent driver
+ * @has_lpm_erratum: true when core was configured with LPM Erratum. Note that
+ *			there's now way for software to detect this in runtime.
+ * @is_utmi_l1_suspend: the core asserts output signal
+ *	0	- utmi_sleep_n
+ *	1	- utmi_l1_suspend_n
+ * @is_fpga: true when we are using the FPGA board
+ * @pending_events: true when we have pending IRQs to be handled
+ * @do_fifo_resize: true when txfifo resizing is enabled for dwc3 endpoints
+ * @pullups_connected: true when Run/Stop bit is set
+ * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
+ * @three_stage_setup: set if we perform a three phase setup
+ * @dis_start_transfer_quirk: set if start_transfer failure SW workaround is
+ *			not needed for DWC_usb31 version 1.70a-ea06 and below
+ * @usb3_lpm_capable: set if hadrware supports Link Power Management
+ * @usb2_lpm_disable: set to disable usb2 lpm for host
+ * @usb2_gadget_lpm_disable: set to disable usb2 lpm for gadget
+ * @disable_scramble_quirk: set if we enable the disable scramble quirk
+ * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk
+ * @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
+ * @req_p1p2p3_quirk: set if we enable request p1p2p3 quirk
+ * @del_p1p2p3_quirk: set if we enable delay p1p2p3 quirk
+ * @del_phy_power_chg_quirk: set if we enable delay phy power change quirk
+ * @lfps_filter_quirk: set if we enable LFPS filter quirk
+ * @rx_detect_poll_quirk: set if we enable rx_detect to polling lfps quirk
+ * @dis_u3_susphy_quirk: set if we disable usb3 suspend phy
+ * @dis_u2_susphy_quirk: set if we disable usb2 suspend phy
+ * @dis_enblslpm_quirk: set if we clear enblslpm in GUSB2PHYCFG,
+ *                      disabling the suspend signal to the PHY.
+ * @dis_u1_entry_quirk: set if link entering into U1 state needs to be disabled.
+ * @dis_u2_entry_quirk: set if link entering into U2 state needs to be disabled.
+ * @dis_rxdet_inp3_quirk: set if we disable Rx.Detect in P3
+ * @async_callbacks: if set, indicate that async callbacks will be used.
+ *
+ * @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists
+ *			in GUSB2PHYCFG, specify that USB2 PHY doesn't
+ *			provide a free-running PHY clock.
+ * @dis_del_phy_power_chg_quirk: set if we disable delay phy power
+ *			change quirk.
+ * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate
+ *			check during HS transmit.
+ * @resume-hs-terminations: Set if we enable quirk for fixing improper crc
+ *			generation after resume from suspend.
+ * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed
+ *			instances in park mode.
+ * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
+ * @tx_de_emphasis: Tx de-emphasis value
+ *	0	- -6dB de-emphasis
+ *	1	- -3.5dB de-emphasis
+ *	2	- No de-emphasis
+ *	3	- Reserved
+ * @dis_metastability_quirk: set to disable metastability quirk.
+ * @dis_split_quirk: set to disable split boundary.
+ * @suspended: set to track suspend event due to U3/L2.
+ * @imod_interval: set the interrupt moderation interval in 250ns
+ *			increments or 0 to disable.
+ * @max_cfg_eps: current max number of IN eps used across all USB configs.
+ * @last_fifo_depth: last fifo depth used to determine next fifo ram start
+ *		     address.
+ * @num_ep_resized: carries the current number endpoints which have had its tx
+ *		    fifo resized.
+ * @debug_root: root debugfs directory for this device to put its files in.
+ */
+struct dwc3 {
+	struct work_struct	drd_work;
+	struct dwc3_trb		*ep0_trb;
+	void			*bounce;
+	void			*scratchbuf;
+	u8			*setup_buf;
+	dma_addr_t		ep0_trb_addr;
+	dma_addr_t		bounce_addr;
+	dma_addr_t		scratch_addr;
+	struct dwc3_request	ep0_usb_req;
+	struct completion	ep0_in_setup;
+
+	/* device lock */
+	spinlock_t		lock;
+
+	/* mode switching lock */
+	struct mutex		mutex;
+
+	struct device		*dev;
+	struct device		*sysdev;
+
+	struct platform_device	*xhci;
+	struct resource		xhci_resources[DWC3_XHCI_RESOURCES_NUM];
+
+	struct dwc3_event_buffer *ev_buf;
+	struct dwc3_ep		*eps[DWC3_ENDPOINTS_NUM];
+
+	struct usb_gadget	*gadget;
+	struct usb_gadget_driver *gadget_driver;
+
+	struct clk		*bus_clk;
+	struct clk		*ref_clk;
+	struct clk		*susp_clk;
+
+	struct reset_control	*reset;
+
+	struct usb_phy		*usb2_phy;
+	struct usb_phy		*usb3_phy;
+
+	struct phy		*usb2_generic_phy;
+	struct phy		*usb3_generic_phy;
+
+	bool			phys_ready;
+
+	struct ulpi		*ulpi;
+	bool			ulpi_ready;
+
+	void __iomem		*regs;
+	size_t			regs_size;
+
+	enum usb_dr_mode	dr_mode;
+	u32			current_dr_role;
+	u32			desired_dr_role;
+	struct extcon_dev	*edev;
+	struct notifier_block	edev_nb;
+	enum usb_phy_interface	hsphy_mode;
+	struct usb_role_switch	*role_sw;
+	enum usb_dr_mode	role_switch_default_mode;
+
+	struct power_supply	*usb_psy;
+
+	u32			fladj;
+	u32			ref_clk_per;
+	u32			irq_gadget;
+	u32			otg_irq;
+	u32			current_otg_role;
+	u32			desired_otg_role;
+	bool			otg_restart_host;
+	u32			nr_scratch;
+	u32			u1u2;
+	u32			maximum_speed;
+	u32			gadget_max_speed;
+	enum usb_ssp_rate	max_ssp_rate;
+	enum usb_ssp_rate	gadget_ssp_rate;
+
+	u32			ip;
+
+#define DWC3_IP			0x5533
+#define DWC31_IP		0x3331
+#define DWC32_IP		0x3332
+
+	u32			revision;
+
+#define DWC3_REVISION_ANY	0x0
+#define DWC3_REVISION_173A	0x5533173a
+#define DWC3_REVISION_175A	0x5533175a
+#define DWC3_REVISION_180A	0x5533180a
+#define DWC3_REVISION_183A	0x5533183a
+#define DWC3_REVISION_185A	0x5533185a
+#define DWC3_REVISION_187A	0x5533187a
+#define DWC3_REVISION_188A	0x5533188a
+#define DWC3_REVISION_190A	0x5533190a
+#define DWC3_REVISION_194A	0x5533194a
+#define DWC3_REVISION_200A	0x5533200a
+#define DWC3_REVISION_202A	0x5533202a
+#define DWC3_REVISION_210A	0x5533210a
+#define DWC3_REVISION_220A	0x5533220a
+#define DWC3_REVISION_230A	0x5533230a
+#define DWC3_REVISION_240A	0x5533240a
+#define DWC3_REVISION_250A	0x5533250a
+#define DWC3_REVISION_260A	0x5533260a
+#define DWC3_REVISION_270A	0x5533270a
+#define DWC3_REVISION_280A	0x5533280a
+#define DWC3_REVISION_290A	0x5533290a
+#define DWC3_REVISION_300A	0x5533300a
+#define DWC3_REVISION_310A	0x5533310a
+#define DWC3_REVISION_330A	0x5533330a
+
+#define DWC31_REVISION_ANY	0x0
+#define DWC31_REVISION_110A	0x3131302a
+#define DWC31_REVISION_120A	0x3132302a
+#define DWC31_REVISION_160A	0x3136302a
+#define DWC31_REVISION_170A	0x3137302a
+#define DWC31_REVISION_180A	0x3138302a
+#define DWC31_REVISION_190A	0x3139302a
+
+#define DWC32_REVISION_ANY	0x0
+#define DWC32_REVISION_100A	0x3130302a
+
+	u32			version_type;
+
+#define DWC31_VERSIONTYPE_ANY		0x0
+#define DWC31_VERSIONTYPE_EA01		0x65613031
+#define DWC31_VERSIONTYPE_EA02		0x65613032
+#define DWC31_VERSIONTYPE_EA03		0x65613033
+#define DWC31_VERSIONTYPE_EA04		0x65613034
+#define DWC31_VERSIONTYPE_EA05		0x65613035
+#define DWC31_VERSIONTYPE_EA06		0x65613036
+
+	enum dwc3_ep0_next	ep0_next_event;
+	enum dwc3_ep0_state	ep0state;
+	enum dwc3_link_state	link_state;
+
+	u16			u2sel;
+	u16			u2pel;
+	u8			u1sel;
+	u8			u1pel;
+
+	u8			speed;
+
+	u8			num_eps;
+
+	struct dwc3_hwparams	hwparams;
+	struct debugfs_regset32	*regset;
+
+	u32			dbg_lsp_select;
+
+	u8			test_mode;
+	u8			test_mode_nr;
+	u8			lpm_nyet_threshold;
+	u8			hird_threshold;
+	u8			rx_thr_num_pkt;
+	u8			rx_max_burst;
+	u8			tx_thr_num_pkt;
+	u8			tx_max_burst;
+	u8			rx_thr_num_pkt_prd;
+	u8			rx_max_burst_prd;
+	u8			tx_thr_num_pkt_prd;
+	u8			tx_max_burst_prd;
+	u8			tx_fifo_resize_max_num;
+	u8			clear_stall_protocol;
+
+	const char		*hsphy_interface;
+
+	unsigned		connected:1;
+	unsigned		softconnect:1;
+	unsigned		delayed_status:1;
+	unsigned		ep0_bounced:1;
+	unsigned		ep0_expect_in:1;
+	unsigned		has_hibernation:1;
+	unsigned		sysdev_is_parent:1;
+	unsigned		has_lpm_erratum:1;
+	unsigned		is_utmi_l1_suspend:1;
+	unsigned		is_fpga:1;
+	unsigned		pending_events:1;
+	unsigned		do_fifo_resize:1;
+	unsigned		pullups_connected:1;
+	unsigned		setup_packet_pending:1;
+	unsigned		three_stage_setup:1;
+	unsigned		dis_start_transfer_quirk:1;
+	unsigned		usb3_lpm_capable:1;
+	unsigned		usb2_lpm_disable:1;
+	unsigned		usb2_gadget_lpm_disable:1;
+
+	unsigned		disable_scramble_quirk:1;
+	unsigned		u2exit_lfps_quirk:1;
+	unsigned		u2ss_inp3_quirk:1;
+	unsigned		req_p1p2p3_quirk:1;
+	unsigned                del_p1p2p3_quirk:1;
+	unsigned		del_phy_power_chg_quirk:1;
+	unsigned		lfps_filter_quirk:1;
+	unsigned		rx_detect_poll_quirk:1;
+	unsigned		dis_u3_susphy_quirk:1;
+	unsigned		dis_u2_susphy_quirk:1;
+	unsigned		dis_enblslpm_quirk:1;
+	unsigned		dis_u1_entry_quirk:1;
+	unsigned		dis_u2_entry_quirk:1;
+	unsigned		dis_rxdet_inp3_quirk:1;
+	unsigned		dis_u2_freeclk_exists_quirk:1;
+	unsigned		dis_del_phy_power_chg_quirk:1;
+	unsigned		dis_tx_ipgap_linecheck_quirk:1;
+	unsigned		resume_hs_terminations:1;
+	unsigned		parkmode_disable_ss_quirk:1;
+	unsigned		gfladj_refclk_lpm_sel:1;
+
+	unsigned		tx_de_emphasis_quirk:1;
+	unsigned		tx_de_emphasis:2;
+
+	unsigned		dis_metastability_quirk:1;
+
+	unsigned		dis_split_quirk:1;
+	unsigned		async_callbacks:1;
+	unsigned		suspended:1;
+
+	u16			imod_interval;
+
+	int			max_cfg_eps;
+	int			last_fifo_depth;
+	int			num_ep_resized;
+	struct dentry		*debug_root;
+};
+
+#define INCRX_BURST_MODE 0
+#define INCRX_UNDEF_LENGTH_BURST_MODE 1
+
+#define work_to_dwc(w)		(container_of((w), struct dwc3, drd_work))
+
+/* -------------------------------------------------------------------------- */
+
+struct dwc3_event_type {
+	u32	is_devspec:1;
+	u32	type:7;
+	u32	reserved8_31:24;
+} __packed;
+
+#define DWC3_DEPEVT_XFERCOMPLETE	0x01
+#define DWC3_DEPEVT_XFERINPROGRESS	0x02
+#define DWC3_DEPEVT_XFERNOTREADY	0x03
+#define DWC3_DEPEVT_RXTXFIFOEVT		0x04
+#define DWC3_DEPEVT_STREAMEVT		0x06
+#define DWC3_DEPEVT_EPCMDCMPLT		0x07
+
+/**
+ * struct dwc3_event_depevt - Device Endpoint Events
+ * @one_bit: indicates this is an endpoint event (not used)
+ * @endpoint_number: number of the endpoint
+ * @endpoint_event: The event we have:
+ *	0x00	- Reserved
+ *	0x01	- XferComplete
+ *	0x02	- XferInProgress
+ *	0x03	- XferNotReady
+ *	0x04	- RxTxFifoEvt (IN->Underrun, OUT->Overrun)
+ *	0x05	- Reserved
+ *	0x06	- StreamEvt
+ *	0x07	- EPCmdCmplt
+ * @reserved11_10: Reserved, don't use.
+ * @status: Indicates the status of the event. Refer to databook for
+ *	more information.
+ * @parameters: Parameters of the current event. Refer to databook for
+ *	more information.
+ */
+struct dwc3_event_depevt {
+	u32	one_bit:1;
+	u32	endpoint_number:5;
+	u32	endpoint_event:4;
+	u32	reserved11_10:2;
+	u32	status:4;
+
+/* Within XferNotReady */
+#define DEPEVT_STATUS_TRANSFER_ACTIVE	BIT(3)
+
+/* Within XferComplete or XferInProgress */
+#define DEPEVT_STATUS_BUSERR	BIT(0)
+#define DEPEVT_STATUS_SHORT	BIT(1)
+#define DEPEVT_STATUS_IOC	BIT(2)
+#define DEPEVT_STATUS_LST	BIT(3) /* XferComplete */
+#define DEPEVT_STATUS_MISSED_ISOC BIT(3) /* XferInProgress */
+
+/* Stream event only */
+#define DEPEVT_STREAMEVT_FOUND		1
+#define DEPEVT_STREAMEVT_NOTFOUND	2
+
+/* Stream event parameter */
+#define DEPEVT_STREAM_PRIME		0xfffe
+#define DEPEVT_STREAM_NOSTREAM		0x0
+
+/* Control-only Status */
+#define DEPEVT_STATUS_CONTROL_DATA	1
+#define DEPEVT_STATUS_CONTROL_STATUS	2
+#define DEPEVT_STATUS_CONTROL_PHASE(n)	((n) & 3)
+
+/* In response to Start Transfer */
+#define DEPEVT_TRANSFER_NO_RESOURCE	1
+#define DEPEVT_TRANSFER_BUS_EXPIRY	2
+
+	u32	parameters:16;
+
+/* For Command Complete Events */
+#define DEPEVT_PARAMETER_CMD(n)	(((n) & (0xf << 8)) >> 8)
+} __packed;
+
+/**
+ * struct dwc3_event_devt - Device Events
+ * @one_bit: indicates this is a non-endpoint event (not used)
+ * @device_event: indicates it's a device event. Should read as 0x00
+ * @type: indicates the type of device event.
+ *	0	- DisconnEvt
+ *	1	- USBRst
+ *	2	- ConnectDone
+ *	3	- ULStChng
+ *	4	- WkUpEvt
+ *	5	- Reserved
+ *	6	- Suspend (EOPF on revisions 2.10a and prior)
+ *	7	- SOF
+ *	8	- Reserved
+ *	9	- ErrticErr
+ *	10	- CmdCmplt
+ *	11	- EvntOverflow
+ *	12	- VndrDevTstRcved
+ * @reserved15_12: Reserved, not used
+ * @event_info: Information about this event
+ * @reserved31_25: Reserved, not used
+ */
+struct dwc3_event_devt {
+	u32	one_bit:1;
+	u32	device_event:7;
+	u32	type:4;
+	u32	reserved15_12:4;
+	u32	event_info:9;
+	u32	reserved31_25:7;
+} __packed;
+
+/**
+ * struct dwc3_event_gevt - Other Core Events
+ * @one_bit: indicates this is a non-endpoint event (not used)
+ * @device_event: indicates it's (0x03) Carkit or (0x04) I2C event.
+ * @phy_port_number: self-explanatory
+ * @reserved31_12: Reserved, not used.
+ */
+struct dwc3_event_gevt {
+	u32	one_bit:1;
+	u32	device_event:7;
+	u32	phy_port_number:4;
+	u32	reserved31_12:20;
+} __packed;
+
+/**
+ * union dwc3_event - representation of Event Buffer contents
+ * @raw: raw 32-bit event
+ * @type: the type of the event
+ * @depevt: Device Endpoint Event
+ * @devt: Device Event
+ * @gevt: Global Event
+ */
+union dwc3_event {
+	u32				raw;
+	struct dwc3_event_type		type;
+	struct dwc3_event_depevt	depevt;
+	struct dwc3_event_devt		devt;
+	struct dwc3_event_gevt		gevt;
+};
+
+/**
+ * struct dwc3_gadget_ep_cmd_params - representation of endpoint command
+ * parameters
+ * @param2: third parameter
+ * @param1: second parameter
+ * @param0: first parameter
+ */
+struct dwc3_gadget_ep_cmd_params {
+	u32	param2;
+	u32	param1;
+	u32	param0;
+};
+
+/*
+ * DWC3 Features to be used as Driver Data
+ */
+
+#define DWC3_HAS_PERIPHERAL		BIT(0)
+#define DWC3_HAS_XHCI			BIT(1)
+#define DWC3_HAS_OTG			BIT(3)
+
+/* prototypes */
+void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode);
+void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
+u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type);
+
+#define DWC3_IP_IS(_ip)							\
+	(dwc->ip == _ip##_IP)
+
+#define DWC3_VER_IS(_ip, _ver)						\
+	(DWC3_IP_IS(_ip) && dwc->revision == _ip##_REVISION_##_ver)
+
+#define DWC3_VER_IS_PRIOR(_ip, _ver)					\
+	(DWC3_IP_IS(_ip) && dwc->revision < _ip##_REVISION_##_ver)
+
+#define DWC3_VER_IS_WITHIN(_ip, _from, _to)				\
+	(DWC3_IP_IS(_ip) &&						\
+	 dwc->revision >= _ip##_REVISION_##_from &&			\
+	 (!(_ip##_REVISION_##_to) ||					\
+	  dwc->revision <= _ip##_REVISION_##_to))
+
+#define DWC3_VER_TYPE_IS_WITHIN(_ip, _ver, _from, _to)			\
+	(DWC3_VER_IS(_ip, _ver) &&					\
+	 dwc->version_type >= _ip##_VERSIONTYPE_##_from &&		\
+	 (!(_ip##_VERSIONTYPE_##_to) ||					\
+	  dwc->version_type <= _ip##_VERSIONTYPE_##_to))
+
+/**
+ * dwc3_mdwidth - get MDWIDTH value in bits
+ * @dwc: pointer to our context structure
+ *
+ * Return MDWIDTH configuration value in bits.
+ */
+static inline u32 dwc3_mdwidth(struct dwc3 *dwc)
+{
+	u32 mdwidth;
+
+	mdwidth = DWC3_GHWPARAMS0_MDWIDTH(dwc->hwparams.hwparams0);
+	if (DWC3_IP_IS(DWC32))
+		mdwidth += DWC3_GHWPARAMS6_MDWIDTH(dwc->hwparams.hwparams6);
+
+	return mdwidth;
+}
+
+bool dwc3_has_imod(struct dwc3 *dwc);
+
+int dwc3_event_buffers_setup(struct dwc3 *dwc);
+void dwc3_event_buffers_cleanup(struct dwc3 *dwc);
+
+int dwc3_core_soft_reset(struct dwc3 *dwc);
+
+#if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
+int dwc3_host_init(struct dwc3 *dwc);
+void dwc3_host_exit(struct dwc3 *dwc);
+#else
+static inline int dwc3_host_init(struct dwc3 *dwc)
+{ return 0; }
+static inline void dwc3_host_exit(struct dwc3 *dwc)
+{ }
+#endif
+
+#if IS_ENABLED(CONFIG_USB_DWC3_GADGET) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
+int dwc3_gadget_init(struct dwc3 *dwc);
+void dwc3_gadget_exit(struct dwc3 *dwc);
+int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
+int dwc3_gadget_get_link_state(struct dwc3 *dwc);
+int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
+int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
+		struct dwc3_gadget_ep_cmd_params *params);
+int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd,
+		u32 param);
+void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc);
+void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep, int status);
+#else
+static inline int dwc3_gadget_init(struct dwc3 *dwc)
+{ return 0; }
+static inline void dwc3_gadget_exit(struct dwc3 *dwc)
+{ }
+static inline int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
+{ return 0; }
+static inline int dwc3_gadget_get_link_state(struct dwc3 *dwc)
+{ return 0; }
+static inline int dwc3_gadget_set_link_state(struct dwc3 *dwc,
+		enum dwc3_link_state state)
+{ return 0; }
+
+static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
+		struct dwc3_gadget_ep_cmd_params *params)
+{ return 0; }
+static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,
+		int cmd, u32 param)
+{ return 0; }
+static inline void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc)
+{ }
+#endif
+
+#if IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
+int dwc3_drd_init(struct dwc3 *dwc);
+void dwc3_drd_exit(struct dwc3 *dwc);
+void dwc3_otg_init(struct dwc3 *dwc);
+void dwc3_otg_exit(struct dwc3 *dwc);
+void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus);
+void dwc3_otg_host_init(struct dwc3 *dwc);
+#else
+static inline int dwc3_drd_init(struct dwc3 *dwc)
+{ return 0; }
+static inline void dwc3_drd_exit(struct dwc3 *dwc)
+{ }
+static inline void dwc3_otg_init(struct dwc3 *dwc)
+{ }
+static inline void dwc3_otg_exit(struct dwc3 *dwc)
+{ }
+static inline void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
+{ }
+static inline void dwc3_otg_host_init(struct dwc3 *dwc)
+{ }
+#endif
+
+/* power management interface */
+#if !IS_ENABLED(CONFIG_USB_DWC3_HOST)
+int dwc3_gadget_suspend(struct dwc3 *dwc);
+int dwc3_gadget_resume(struct dwc3 *dwc);
+void dwc3_gadget_process_pending_events(struct dwc3 *dwc);
+#else
+static inline int dwc3_gadget_suspend(struct dwc3 *dwc)
+{
+	return 0;
+}
+
+static inline int dwc3_gadget_resume(struct dwc3 *dwc)
+{
+	return 0;
+}
+
+static inline void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
+{
+}
+#endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */
+
+#if IS_ENABLED(CONFIG_USB_DWC3_ULPI)
+int dwc3_ulpi_init(struct dwc3 *dwc);
+void dwc3_ulpi_exit(struct dwc3 *dwc);
+#else
+static inline int dwc3_ulpi_init(struct dwc3 *dwc)
+{ return 0; }
+static inline void dwc3_ulpi_exit(struct dwc3 *dwc)
+{ }
+#endif
+
+#endif /* __DRIVERS_USB_DWC3_CORE_H */
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
new file mode 100644
index 000000000..8bb2c9e3b
--- /dev/null
+++ b/drivers/usb/dwc3/debug.h
@@ -0,0 +1,430 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * debug.h - DesignWare USB3 DRD Controller Debug Header
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ */
+
+#ifndef __DWC3_DEBUG_H
+#define __DWC3_DEBUG_H
+
+#include "core.h"
+
+/**
+ * dwc3_gadget_ep_cmd_string - returns endpoint command string
+ * @cmd: command code
+ */
+static inline const char *
+dwc3_gadget_ep_cmd_string(u8 cmd)
+{
+	switch (cmd) {
+	case DWC3_DEPCMD_DEPSTARTCFG:
+		return "Start New Configuration";
+	case DWC3_DEPCMD_ENDTRANSFER:
+		return "End Transfer";
+	case DWC3_DEPCMD_UPDATETRANSFER:
+		return "Update Transfer";
+	case DWC3_DEPCMD_STARTTRANSFER:
+		return "Start Transfer";
+	case DWC3_DEPCMD_CLEARSTALL:
+		return "Clear Stall";
+	case DWC3_DEPCMD_SETSTALL:
+		return "Set Stall";
+	case DWC3_DEPCMD_GETEPSTATE:
+		return "Get Endpoint State";
+	case DWC3_DEPCMD_SETTRANSFRESOURCE:
+		return "Set Endpoint Transfer Resource";
+	case DWC3_DEPCMD_SETEPCONFIG:
+		return "Set Endpoint Configuration";
+	default:
+		return "UNKNOWN command";
+	}
+}
+
+/**
+ * dwc3_gadget_generic_cmd_string - returns generic command string
+ * @cmd: command code
+ */
+static inline const char *
+dwc3_gadget_generic_cmd_string(u8 cmd)
+{
+	switch (cmd) {
+	case DWC3_DGCMD_SET_LMP:
+		return "Set LMP";
+	case DWC3_DGCMD_SET_PERIODIC_PAR:
+		return "Set Periodic Parameters";
+	case DWC3_DGCMD_XMIT_FUNCTION:
+		return "Transmit Function Wake Device Notification";
+	case DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO:
+		return "Set Scratchpad Buffer Array Address Lo";
+	case DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI:
+		return "Set Scratchpad Buffer Array Address Hi";
+	case DWC3_DGCMD_SELECTED_FIFO_FLUSH:
+		return "Selected FIFO Flush";
+	case DWC3_DGCMD_ALL_FIFO_FLUSH:
+		return "All FIFO Flush";
+	case DWC3_DGCMD_SET_ENDPOINT_NRDY:
+		return "Set Endpoint NRDY";
+	case DWC3_DGCMD_SET_ENDPOINT_PRIME:
+		return "Set Endpoint Prime";
+	case DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK:
+		return "Run SoC Bus Loopback Test";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+/**
+ * dwc3_gadget_link_string - returns link name
+ * @link_state: link state code
+ */
+static inline const char *
+dwc3_gadget_link_string(enum dwc3_link_state link_state)
+{
+	switch (link_state) {
+	case DWC3_LINK_STATE_U0:
+		return "U0";
+	case DWC3_LINK_STATE_U1:
+		return "U1";
+	case DWC3_LINK_STATE_U2:
+		return "U2";
+	case DWC3_LINK_STATE_U3:
+		return "U3";
+	case DWC3_LINK_STATE_SS_DIS:
+		return "SS.Disabled";
+	case DWC3_LINK_STATE_RX_DET:
+		return "RX.Detect";
+	case DWC3_LINK_STATE_SS_INACT:
+		return "SS.Inactive";
+	case DWC3_LINK_STATE_POLL:
+		return "Polling";
+	case DWC3_LINK_STATE_RECOV:
+		return "Recovery";
+	case DWC3_LINK_STATE_HRESET:
+		return "Hot Reset";
+	case DWC3_LINK_STATE_CMPLY:
+		return "Compliance";
+	case DWC3_LINK_STATE_LPBK:
+		return "Loopback";
+	case DWC3_LINK_STATE_RESET:
+		return "Reset";
+	case DWC3_LINK_STATE_RESUME:
+		return "Resume";
+	default:
+		return "UNKNOWN link state";
+	}
+}
+
+/**
+ * dwc3_gadget_hs_link_string - returns highspeed and below link name
+ * @link_state: link state code
+ */
+static inline const char *
+dwc3_gadget_hs_link_string(enum dwc3_link_state link_state)
+{
+	switch (link_state) {
+	case DWC3_LINK_STATE_U0:
+		return "On";
+	case DWC3_LINK_STATE_U2:
+		return "Sleep";
+	case DWC3_LINK_STATE_U3:
+		return "Suspend";
+	case DWC3_LINK_STATE_SS_DIS:
+		return "Disconnected";
+	case DWC3_LINK_STATE_RX_DET:
+		return "Early Suspend";
+	case DWC3_LINK_STATE_RECOV:
+		return "Recovery";
+	case DWC3_LINK_STATE_RESET:
+		return "Reset";
+	case DWC3_LINK_STATE_RESUME:
+		return "Resume";
+	default:
+		return "UNKNOWN link state";
+	}
+}
+
+/**
+ * dwc3_trb_type_string - returns TRB type as a string
+ * @type: the type of the TRB
+ */
+static inline const char *dwc3_trb_type_string(unsigned int type)
+{
+	switch (type) {
+	case DWC3_TRBCTL_NORMAL:
+		return "normal";
+	case DWC3_TRBCTL_CONTROL_SETUP:
+		return "setup";
+	case DWC3_TRBCTL_CONTROL_STATUS2:
+		return "status2";
+	case DWC3_TRBCTL_CONTROL_STATUS3:
+		return "status3";
+	case DWC3_TRBCTL_CONTROL_DATA:
+		return "data";
+	case DWC3_TRBCTL_ISOCHRONOUS_FIRST:
+		return "isoc-first";
+	case DWC3_TRBCTL_ISOCHRONOUS:
+		return "isoc";
+	case DWC3_TRBCTL_LINK_TRB:
+		return "link";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static inline const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
+{
+	switch (state) {
+	case EP0_UNCONNECTED:
+		return "Unconnected";
+	case EP0_SETUP_PHASE:
+		return "Setup Phase";
+	case EP0_DATA_PHASE:
+		return "Data Phase";
+	case EP0_STATUS_PHASE:
+		return "Status Phase";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+/**
+ * dwc3_gadget_event_string - returns event name
+ * @event: the event code
+ */
+static inline const char *dwc3_gadget_event_string(char *str, size_t size,
+		const struct dwc3_event_devt *event)
+{
+	enum dwc3_link_state state = event->event_info & DWC3_LINK_STATE_MASK;
+
+	switch (event->type) {
+	case DWC3_DEVICE_EVENT_DISCONNECT:
+		snprintf(str, size, "Disconnect: [%s]",
+				dwc3_gadget_link_string(state));
+		break;
+	case DWC3_DEVICE_EVENT_RESET:
+		snprintf(str, size, "Reset [%s]",
+				dwc3_gadget_link_string(state));
+		break;
+	case DWC3_DEVICE_EVENT_CONNECT_DONE:
+		snprintf(str, size, "Connection Done [%s]",
+				dwc3_gadget_link_string(state));
+		break;
+	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
+		snprintf(str, size, "Link Change [%s]",
+				dwc3_gadget_link_string(state));
+		break;
+	case DWC3_DEVICE_EVENT_WAKEUP:
+		snprintf(str, size, "WakeUp [%s]",
+				dwc3_gadget_link_string(state));
+		break;
+	case DWC3_DEVICE_EVENT_SUSPEND:
+		snprintf(str, size, "Suspend [%s]",
+				dwc3_gadget_link_string(state));
+		break;
+	case DWC3_DEVICE_EVENT_SOF:
+		snprintf(str, size, "Start-Of-Frame [%s]",
+				dwc3_gadget_link_string(state));
+		break;
+	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
+		snprintf(str, size, "Erratic Error [%s]",
+				dwc3_gadget_link_string(state));
+		break;
+	case DWC3_DEVICE_EVENT_CMD_CMPL:
+		snprintf(str, size, "Command Complete [%s]",
+				dwc3_gadget_link_string(state));
+		break;
+	case DWC3_DEVICE_EVENT_OVERFLOW:
+		snprintf(str, size, "Overflow [%s]",
+				dwc3_gadget_link_string(state));
+		break;
+	default:
+		snprintf(str, size, "UNKNOWN");
+	}
+
+	return str;
+}
+
+/**
+ * dwc3_ep_event_string - returns event name
+ * @event: then event code
+ */
+static inline const char *dwc3_ep_event_string(char *str, size_t size,
+		const struct dwc3_event_depevt *event, u32 ep0state)
+{
+	u8 epnum = event->endpoint_number;
+	size_t len;
+	int status;
+
+	len = scnprintf(str, size, "ep%d%s: ", epnum >> 1,
+			(epnum & 1) ? "in" : "out");
+
+	status = event->status;
+
+	switch (event->endpoint_event) {
+	case DWC3_DEPEVT_XFERCOMPLETE:
+		len += scnprintf(str + len, size - len,
+				"Transfer Complete (%c%c%c)",
+				status & DEPEVT_STATUS_SHORT ? 'S' : 's',
+				status & DEPEVT_STATUS_IOC ? 'I' : 'i',
+				status & DEPEVT_STATUS_LST ? 'L' : 'l');
+
+		if (epnum <= 1)
+			scnprintf(str + len, size - len, " [%s]",
+					dwc3_ep0_state_string(ep0state));
+		break;
+	case DWC3_DEPEVT_XFERINPROGRESS:
+		scnprintf(str + len, size - len,
+				"Transfer In Progress [%08x] (%c%c%c)",
+				event->parameters,
+				status & DEPEVT_STATUS_SHORT ? 'S' : 's',
+				status & DEPEVT_STATUS_IOC ? 'I' : 'i',
+				status & DEPEVT_STATUS_LST ? 'M' : 'm');
+		break;
+	case DWC3_DEPEVT_XFERNOTREADY:
+		len += scnprintf(str + len, size - len,
+				"Transfer Not Ready [%08x]%s",
+				event->parameters,
+				status & DEPEVT_STATUS_TRANSFER_ACTIVE ?
+				" (Active)" : " (Not Active)");
+
+		/* Control Endpoints */
+		if (epnum <= 1) {
+			int phase = DEPEVT_STATUS_CONTROL_PHASE(event->status);
+
+			switch (phase) {
+			case DEPEVT_STATUS_CONTROL_DATA:
+				scnprintf(str + len, size - len,
+						" [Data Phase]");
+				break;
+			case DEPEVT_STATUS_CONTROL_STATUS:
+				scnprintf(str + len, size - len,
+						" [Status Phase]");
+			}
+		}
+		break;
+	case DWC3_DEPEVT_RXTXFIFOEVT:
+		scnprintf(str + len, size - len, "FIFO");
+		break;
+	case DWC3_DEPEVT_STREAMEVT:
+		status = event->status;
+
+		switch (status) {
+		case DEPEVT_STREAMEVT_FOUND:
+			scnprintf(str + len, size - len, " Stream %d Found",
+					event->parameters);
+			break;
+		case DEPEVT_STREAMEVT_NOTFOUND:
+		default:
+			scnprintf(str + len, size - len, " Stream Not Found");
+			break;
+		}
+
+		break;
+	case DWC3_DEPEVT_EPCMDCMPLT:
+		scnprintf(str + len, size - len, "Endpoint Command Complete");
+		break;
+	default:
+		scnprintf(str + len, size - len, "UNKNOWN");
+	}
+
+	return str;
+}
+
+/**
+ * dwc3_gadget_event_type_string - return event name
+ * @event: the event code
+ */
+static inline const char *dwc3_gadget_event_type_string(u8 event)
+{
+	switch (event) {
+	case DWC3_DEVICE_EVENT_DISCONNECT:
+		return "Disconnect";
+	case DWC3_DEVICE_EVENT_RESET:
+		return "Reset";
+	case DWC3_DEVICE_EVENT_CONNECT_DONE:
+		return "Connect Done";
+	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
+		return "Link Status Change";
+	case DWC3_DEVICE_EVENT_WAKEUP:
+		return "Wake-Up";
+	case DWC3_DEVICE_EVENT_HIBER_REQ:
+		return "Hibernation";
+	case DWC3_DEVICE_EVENT_SUSPEND:
+		return "Suspend";
+	case DWC3_DEVICE_EVENT_SOF:
+		return "Start of Frame";
+	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
+		return "Erratic Error";
+	case DWC3_DEVICE_EVENT_CMD_CMPL:
+		return "Command Complete";
+	case DWC3_DEVICE_EVENT_OVERFLOW:
+		return "Overflow";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static inline const char *dwc3_decode_event(char *str, size_t size, u32 event,
+		u32 ep0state)
+{
+	union dwc3_event evt;
+
+	memcpy(&evt, &event, sizeof(event));
+
+	if (evt.type.is_devspec)
+		return dwc3_gadget_event_string(str, size, &evt.devt);
+	else
+		return dwc3_ep_event_string(str, size, &evt.depevt, ep0state);
+}
+
+static inline const char *dwc3_ep_cmd_status_string(int status)
+{
+	switch (status) {
+	case -ETIMEDOUT:
+		return "Timed Out";
+	case 0:
+		return "Successful";
+	case DEPEVT_TRANSFER_NO_RESOURCE:
+		return "No Resource";
+	case DEPEVT_TRANSFER_BUS_EXPIRY:
+		return "Bus Expiry";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static inline const char *dwc3_gadget_generic_cmd_status_string(int status)
+{
+	switch (status) {
+	case -ETIMEDOUT:
+		return "Timed Out";
+	case 0:
+		return "Successful";
+	case 1:
+		return "Error";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+
+#ifdef CONFIG_DEBUG_FS
+extern void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep);
+extern void dwc3_debugfs_remove_endpoint_dir(struct dwc3_ep *dep);
+extern void dwc3_debugfs_init(struct dwc3 *d);
+extern void dwc3_debugfs_exit(struct dwc3 *d);
+#else
+static inline void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep)
+{  }
+static inline void dwc3_debugfs_remove_endpoint_dir(struct dwc3_ep *dep)
+{  }
+static inline void dwc3_debugfs_init(struct dwc3 *d)
+{  }
+static inline void dwc3_debugfs_exit(struct dwc3 *d)
+{  }
+#endif
+#endif /* __DWC3_DEBUG_H */
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
new file mode 100644
index 000000000..f0ffd2e5c
--- /dev/null
+++ b/drivers/usb/dwc3/debugfs.c
@@ -0,0 +1,1040 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * debugfs.c - DesignWare USB3 DRD Controller DebugFS file
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/ptrace.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+
+#include <linux/usb/ch9.h>
+
+#include "core.h"
+#include "gadget.h"
+#include "io.h"
+#include "debug.h"
+
+#define DWC3_LSP_MUX_UNSELECTED 0xfffff
+
+#define dump_register(nm)				\
+{							\
+	.name	= __stringify(nm),			\
+	.offset	= DWC3_ ##nm,				\
+}
+
+#define dump_ep_register_set(n)			\
+	{					\
+		.name = "DEPCMDPAR2("__stringify(n)")",	\
+		.offset = DWC3_DEP_BASE(n) +	\
+			DWC3_DEPCMDPAR2,	\
+	},					\
+	{					\
+		.name = "DEPCMDPAR1("__stringify(n)")",	\
+		.offset = DWC3_DEP_BASE(n) +	\
+			DWC3_DEPCMDPAR1,	\
+	},					\
+	{					\
+		.name = "DEPCMDPAR0("__stringify(n)")",	\
+		.offset = DWC3_DEP_BASE(n) +	\
+			DWC3_DEPCMDPAR0,	\
+	},					\
+	{					\
+		.name = "DEPCMD("__stringify(n)")",	\
+		.offset = DWC3_DEP_BASE(n) +	\
+			DWC3_DEPCMD,		\
+	}
+
+
+static const struct debugfs_reg32 dwc3_regs[] = {
+	dump_register(GSBUSCFG0),
+	dump_register(GSBUSCFG1),
+	dump_register(GTXTHRCFG),
+	dump_register(GRXTHRCFG),
+	dump_register(GCTL),
+	dump_register(GEVTEN),
+	dump_register(GSTS),
+	dump_register(GUCTL1),
+	dump_register(GSNPSID),
+	dump_register(GGPIO),
+	dump_register(GUID),
+	dump_register(GUCTL),
+	dump_register(GBUSERRADDR0),
+	dump_register(GBUSERRADDR1),
+	dump_register(GPRTBIMAP0),
+	dump_register(GPRTBIMAP1),
+	dump_register(GHWPARAMS0),
+	dump_register(GHWPARAMS1),
+	dump_register(GHWPARAMS2),
+	dump_register(GHWPARAMS3),
+	dump_register(GHWPARAMS4),
+	dump_register(GHWPARAMS5),
+	dump_register(GHWPARAMS6),
+	dump_register(GHWPARAMS7),
+	dump_register(GDBGFIFOSPACE),
+	dump_register(GDBGLTSSM),
+	dump_register(GDBGBMU),
+	dump_register(GPRTBIMAP_HS0),
+	dump_register(GPRTBIMAP_HS1),
+	dump_register(GPRTBIMAP_FS0),
+	dump_register(GPRTBIMAP_FS1),
+
+	dump_register(GUSB2PHYCFG(0)),
+	dump_register(GUSB2PHYCFG(1)),
+	dump_register(GUSB2PHYCFG(2)),
+	dump_register(GUSB2PHYCFG(3)),
+	dump_register(GUSB2PHYCFG(4)),
+	dump_register(GUSB2PHYCFG(5)),
+	dump_register(GUSB2PHYCFG(6)),
+	dump_register(GUSB2PHYCFG(7)),
+	dump_register(GUSB2PHYCFG(8)),
+	dump_register(GUSB2PHYCFG(9)),
+	dump_register(GUSB2PHYCFG(10)),
+	dump_register(GUSB2PHYCFG(11)),
+	dump_register(GUSB2PHYCFG(12)),
+	dump_register(GUSB2PHYCFG(13)),
+	dump_register(GUSB2PHYCFG(14)),
+	dump_register(GUSB2PHYCFG(15)),
+
+	dump_register(GUSB2I2CCTL(0)),
+	dump_register(GUSB2I2CCTL(1)),
+	dump_register(GUSB2I2CCTL(2)),
+	dump_register(GUSB2I2CCTL(3)),
+	dump_register(GUSB2I2CCTL(4)),
+	dump_register(GUSB2I2CCTL(5)),
+	dump_register(GUSB2I2CCTL(6)),
+	dump_register(GUSB2I2CCTL(7)),
+	dump_register(GUSB2I2CCTL(8)),
+	dump_register(GUSB2I2CCTL(9)),
+	dump_register(GUSB2I2CCTL(10)),
+	dump_register(GUSB2I2CCTL(11)),
+	dump_register(GUSB2I2CCTL(12)),
+	dump_register(GUSB2I2CCTL(13)),
+	dump_register(GUSB2I2CCTL(14)),
+	dump_register(GUSB2I2CCTL(15)),
+
+	dump_register(GUSB2PHYACC(0)),
+	dump_register(GUSB2PHYACC(1)),
+	dump_register(GUSB2PHYACC(2)),
+	dump_register(GUSB2PHYACC(3)),
+	dump_register(GUSB2PHYACC(4)),
+	dump_register(GUSB2PHYACC(5)),
+	dump_register(GUSB2PHYACC(6)),
+	dump_register(GUSB2PHYACC(7)),
+	dump_register(GUSB2PHYACC(8)),
+	dump_register(GUSB2PHYACC(9)),
+	dump_register(GUSB2PHYACC(10)),
+	dump_register(GUSB2PHYACC(11)),
+	dump_register(GUSB2PHYACC(12)),
+	dump_register(GUSB2PHYACC(13)),
+	dump_register(GUSB2PHYACC(14)),
+	dump_register(GUSB2PHYACC(15)),
+
+	dump_register(GUSB3PIPECTL(0)),
+	dump_register(GUSB3PIPECTL(1)),
+	dump_register(GUSB3PIPECTL(2)),
+	dump_register(GUSB3PIPECTL(3)),
+	dump_register(GUSB3PIPECTL(4)),
+	dump_register(GUSB3PIPECTL(5)),
+	dump_register(GUSB3PIPECTL(6)),
+	dump_register(GUSB3PIPECTL(7)),
+	dump_register(GUSB3PIPECTL(8)),
+	dump_register(GUSB3PIPECTL(9)),
+	dump_register(GUSB3PIPECTL(10)),
+	dump_register(GUSB3PIPECTL(11)),
+	dump_register(GUSB3PIPECTL(12)),
+	dump_register(GUSB3PIPECTL(13)),
+	dump_register(GUSB3PIPECTL(14)),
+	dump_register(GUSB3PIPECTL(15)),
+
+	dump_register(GTXFIFOSIZ(0)),
+	dump_register(GTXFIFOSIZ(1)),
+	dump_register(GTXFIFOSIZ(2)),
+	dump_register(GTXFIFOSIZ(3)),
+	dump_register(GTXFIFOSIZ(4)),
+	dump_register(GTXFIFOSIZ(5)),
+	dump_register(GTXFIFOSIZ(6)),
+	dump_register(GTXFIFOSIZ(7)),
+	dump_register(GTXFIFOSIZ(8)),
+	dump_register(GTXFIFOSIZ(9)),
+	dump_register(GTXFIFOSIZ(10)),
+	dump_register(GTXFIFOSIZ(11)),
+	dump_register(GTXFIFOSIZ(12)),
+	dump_register(GTXFIFOSIZ(13)),
+	dump_register(GTXFIFOSIZ(14)),
+	dump_register(GTXFIFOSIZ(15)),
+	dump_register(GTXFIFOSIZ(16)),
+	dump_register(GTXFIFOSIZ(17)),
+	dump_register(GTXFIFOSIZ(18)),
+	dump_register(GTXFIFOSIZ(19)),
+	dump_register(GTXFIFOSIZ(20)),
+	dump_register(GTXFIFOSIZ(21)),
+	dump_register(GTXFIFOSIZ(22)),
+	dump_register(GTXFIFOSIZ(23)),
+	dump_register(GTXFIFOSIZ(24)),
+	dump_register(GTXFIFOSIZ(25)),
+	dump_register(GTXFIFOSIZ(26)),
+	dump_register(GTXFIFOSIZ(27)),
+	dump_register(GTXFIFOSIZ(28)),
+	dump_register(GTXFIFOSIZ(29)),
+	dump_register(GTXFIFOSIZ(30)),
+	dump_register(GTXFIFOSIZ(31)),
+
+	dump_register(GRXFIFOSIZ(0)),
+	dump_register(GRXFIFOSIZ(1)),
+	dump_register(GRXFIFOSIZ(2)),
+	dump_register(GRXFIFOSIZ(3)),
+	dump_register(GRXFIFOSIZ(4)),
+	dump_register(GRXFIFOSIZ(5)),
+	dump_register(GRXFIFOSIZ(6)),
+	dump_register(GRXFIFOSIZ(7)),
+	dump_register(GRXFIFOSIZ(8)),
+	dump_register(GRXFIFOSIZ(9)),
+	dump_register(GRXFIFOSIZ(10)),
+	dump_register(GRXFIFOSIZ(11)),
+	dump_register(GRXFIFOSIZ(12)),
+	dump_register(GRXFIFOSIZ(13)),
+	dump_register(GRXFIFOSIZ(14)),
+	dump_register(GRXFIFOSIZ(15)),
+	dump_register(GRXFIFOSIZ(16)),
+	dump_register(GRXFIFOSIZ(17)),
+	dump_register(GRXFIFOSIZ(18)),
+	dump_register(GRXFIFOSIZ(19)),
+	dump_register(GRXFIFOSIZ(20)),
+	dump_register(GRXFIFOSIZ(21)),
+	dump_register(GRXFIFOSIZ(22)),
+	dump_register(GRXFIFOSIZ(23)),
+	dump_register(GRXFIFOSIZ(24)),
+	dump_register(GRXFIFOSIZ(25)),
+	dump_register(GRXFIFOSIZ(26)),
+	dump_register(GRXFIFOSIZ(27)),
+	dump_register(GRXFIFOSIZ(28)),
+	dump_register(GRXFIFOSIZ(29)),
+	dump_register(GRXFIFOSIZ(30)),
+	dump_register(GRXFIFOSIZ(31)),
+
+	dump_register(GEVNTADRLO(0)),
+	dump_register(GEVNTADRHI(0)),
+	dump_register(GEVNTSIZ(0)),
+	dump_register(GEVNTCOUNT(0)),
+
+	dump_register(GHWPARAMS8),
+	dump_register(DCFG),
+	dump_register(DCTL),
+	dump_register(DEVTEN),
+	dump_register(DSTS),
+	dump_register(DGCMDPAR),
+	dump_register(DGCMD),
+	dump_register(DALEPENA),
+
+	dump_ep_register_set(0),
+	dump_ep_register_set(1),
+	dump_ep_register_set(2),
+	dump_ep_register_set(3),
+	dump_ep_register_set(4),
+	dump_ep_register_set(5),
+	dump_ep_register_set(6),
+	dump_ep_register_set(7),
+	dump_ep_register_set(8),
+	dump_ep_register_set(9),
+	dump_ep_register_set(10),
+	dump_ep_register_set(11),
+	dump_ep_register_set(12),
+	dump_ep_register_set(13),
+	dump_ep_register_set(14),
+	dump_ep_register_set(15),
+	dump_ep_register_set(16),
+	dump_ep_register_set(17),
+	dump_ep_register_set(18),
+	dump_ep_register_set(19),
+	dump_ep_register_set(20),
+	dump_ep_register_set(21),
+	dump_ep_register_set(22),
+	dump_ep_register_set(23),
+	dump_ep_register_set(24),
+	dump_ep_register_set(25),
+	dump_ep_register_set(26),
+	dump_ep_register_set(27),
+	dump_ep_register_set(28),
+	dump_ep_register_set(29),
+	dump_ep_register_set(30),
+	dump_ep_register_set(31),
+
+	dump_register(OCFG),
+	dump_register(OCTL),
+	dump_register(OEVT),
+	dump_register(OEVTEN),
+	dump_register(OSTS),
+};
+
+static void dwc3_host_lsp(struct seq_file *s)
+{
+	struct dwc3		*dwc = s->private;
+	bool			dbc_enabled;
+	u32			sel;
+	u32			reg;
+	u32			val;
+
+	dbc_enabled = !!(dwc->hwparams.hwparams1 & DWC3_GHWPARAMS1_ENDBC);
+
+	sel = dwc->dbg_lsp_select;
+	if (sel == DWC3_LSP_MUX_UNSELECTED) {
+		seq_puts(s, "Write LSP selection to print for host\n");
+		return;
+	}
+
+	reg = DWC3_GDBGLSPMUX_HOSTSELECT(sel);
+
+	dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg);
+	val = dwc3_readl(dwc->regs, DWC3_GDBGLSP);
+	seq_printf(s, "GDBGLSP[%d] = 0x%08x\n", sel, val);
+
+	if (dbc_enabled && sel < 256) {
+		reg |= DWC3_GDBGLSPMUX_ENDBC;
+		dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg);
+		val = dwc3_readl(dwc->regs, DWC3_GDBGLSP);
+		seq_printf(s, "GDBGLSP_DBC[%d] = 0x%08x\n", sel, val);
+	}
+}
+
+static void dwc3_gadget_lsp(struct seq_file *s)
+{
+	struct dwc3		*dwc = s->private;
+	int			i;
+	u32			reg;
+
+	for (i = 0; i < 16; i++) {
+		reg = DWC3_GDBGLSPMUX_DEVSELECT(i);
+		dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg);
+		reg = dwc3_readl(dwc->regs, DWC3_GDBGLSP);
+		seq_printf(s, "GDBGLSP[%d] = 0x%08x\n", i, reg);
+	}
+}
+
+static int dwc3_lsp_show(struct seq_file *s, void *unused)
+{
+	struct dwc3		*dwc = s->private;
+	unsigned int		current_mode;
+	unsigned long		flags;
+	u32			reg;
+	int			ret;
+
+	ret = pm_runtime_resume_and_get(dwc->dev);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	reg = dwc3_readl(dwc->regs, DWC3_GSTS);
+	current_mode = DWC3_GSTS_CURMOD(reg);
+
+	switch (current_mode) {
+	case DWC3_GSTS_CURMOD_HOST:
+		dwc3_host_lsp(s);
+		break;
+	case DWC3_GSTS_CURMOD_DEVICE:
+		dwc3_gadget_lsp(s);
+		break;
+	default:
+		seq_puts(s, "Mode is unknown, no LSP register printed\n");
+		break;
+	}
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	pm_runtime_put_sync(dwc->dev);
+
+	return 0;
+}
+
+static int dwc3_lsp_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dwc3_lsp_show, inode->i_private);
+}
+
+static ssize_t dwc3_lsp_write(struct file *file, const char __user *ubuf,
+			      size_t count, loff_t *ppos)
+{
+	struct seq_file		*s = file->private_data;
+	struct dwc3		*dwc = s->private;
+	unsigned long		flags;
+	char			buf[32] = { 0 };
+	u32			sel;
+	int			ret;
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	ret = kstrtouint(buf, 0, &sel);
+	if (ret)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc->dbg_lsp_select = sel;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return count;
+}
+
+static const struct file_operations dwc3_lsp_fops = {
+	.open			= dwc3_lsp_open,
+	.write			= dwc3_lsp_write,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
+static int dwc3_mode_show(struct seq_file *s, void *unused)
+{
+	struct dwc3		*dwc = s->private;
+	unsigned long		flags;
+	u32			reg;
+	int			ret;
+
+	ret = pm_runtime_resume_and_get(dwc->dev);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	switch (DWC3_GCTL_PRTCAP(reg)) {
+	case DWC3_GCTL_PRTCAP_HOST:
+		seq_puts(s, "host\n");
+		break;
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		seq_puts(s, "device\n");
+		break;
+	case DWC3_GCTL_PRTCAP_OTG:
+		seq_puts(s, "otg\n");
+		break;
+	default:
+		seq_printf(s, "UNKNOWN %08x\n", DWC3_GCTL_PRTCAP(reg));
+	}
+
+	pm_runtime_put_sync(dwc->dev);
+
+	return 0;
+}
+
+static int dwc3_mode_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dwc3_mode_show, inode->i_private);
+}
+
+static ssize_t dwc3_mode_write(struct file *file,
+		const char __user *ubuf, size_t count, loff_t *ppos)
+{
+	struct seq_file		*s = file->private_data;
+	struct dwc3		*dwc = s->private;
+	u32			mode = 0;
+	char			buf[32];
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	if (dwc->dr_mode != USB_DR_MODE_OTG)
+		return count;
+
+	if (!strncmp(buf, "host", 4))
+		mode = DWC3_GCTL_PRTCAP_HOST;
+
+	if (!strncmp(buf, "device", 6))
+		mode = DWC3_GCTL_PRTCAP_DEVICE;
+
+	if (!strncmp(buf, "otg", 3))
+		mode = DWC3_GCTL_PRTCAP_OTG;
+
+	dwc3_set_mode(dwc, mode);
+
+	return count;
+}
+
+static const struct file_operations dwc3_mode_fops = {
+	.open			= dwc3_mode_open,
+	.write			= dwc3_mode_write,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
+static int dwc3_testmode_show(struct seq_file *s, void *unused)
+{
+	struct dwc3		*dwc = s->private;
+	unsigned long		flags;
+	u32			reg;
+	int			ret;
+
+	ret = pm_runtime_resume_and_get(dwc->dev);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	reg &= DWC3_DCTL_TSTCTRL_MASK;
+	reg >>= 1;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	switch (reg) {
+	case 0:
+		seq_puts(s, "no test\n");
+		break;
+	case USB_TEST_J:
+		seq_puts(s, "test_j\n");
+		break;
+	case USB_TEST_K:
+		seq_puts(s, "test_k\n");
+		break;
+	case USB_TEST_SE0_NAK:
+		seq_puts(s, "test_se0_nak\n");
+		break;
+	case USB_TEST_PACKET:
+		seq_puts(s, "test_packet\n");
+		break;
+	case USB_TEST_FORCE_ENABLE:
+		seq_puts(s, "test_force_enable\n");
+		break;
+	default:
+		seq_printf(s, "UNKNOWN %d\n", reg);
+	}
+
+	pm_runtime_put_sync(dwc->dev);
+
+	return 0;
+}
+
+static int dwc3_testmode_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dwc3_testmode_show, inode->i_private);
+}
+
+static ssize_t dwc3_testmode_write(struct file *file,
+		const char __user *ubuf, size_t count, loff_t *ppos)
+{
+	struct seq_file		*s = file->private_data;
+	struct dwc3		*dwc = s->private;
+	unsigned long		flags;
+	u32			testmode = 0;
+	char			buf[32];
+	int			ret;
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	if (!strncmp(buf, "test_j", 6))
+		testmode = USB_TEST_J;
+	else if (!strncmp(buf, "test_k", 6))
+		testmode = USB_TEST_K;
+	else if (!strncmp(buf, "test_se0_nak", 12))
+		testmode = USB_TEST_SE0_NAK;
+	else if (!strncmp(buf, "test_packet", 11))
+		testmode = USB_TEST_PACKET;
+	else if (!strncmp(buf, "test_force_enable", 17))
+		testmode = USB_TEST_FORCE_ENABLE;
+	else
+		testmode = 0;
+
+	ret = pm_runtime_resume_and_get(dwc->dev);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc3_gadget_set_test_mode(dwc, testmode);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	pm_runtime_put_sync(dwc->dev);
+
+	return count;
+}
+
+static const struct file_operations dwc3_testmode_fops = {
+	.open			= dwc3_testmode_open,
+	.write			= dwc3_testmode_write,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
+static int dwc3_link_state_show(struct seq_file *s, void *unused)
+{
+	struct dwc3		*dwc = s->private;
+	unsigned long		flags;
+	enum dwc3_link_state	state;
+	u32			reg;
+	u8			speed;
+	int			ret;
+
+	ret = pm_runtime_resume_and_get(dwc->dev);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	reg = dwc3_readl(dwc->regs, DWC3_GSTS);
+	if (DWC3_GSTS_CURMOD(reg) != DWC3_GSTS_CURMOD_DEVICE) {
+		seq_puts(s, "Not available\n");
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		pm_runtime_put_sync(dwc->dev);
+		return 0;
+	}
+
+	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+	state = DWC3_DSTS_USBLNKST(reg);
+	speed = reg & DWC3_DSTS_CONNECTSPD;
+
+	seq_printf(s, "%s\n", (speed >= DWC3_DSTS_SUPERSPEED) ?
+		   dwc3_gadget_link_string(state) :
+		   dwc3_gadget_hs_link_string(state));
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	pm_runtime_put_sync(dwc->dev);
+
+	return 0;
+}
+
+static int dwc3_link_state_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dwc3_link_state_show, inode->i_private);
+}
+
+static ssize_t dwc3_link_state_write(struct file *file,
+		const char __user *ubuf, size_t count, loff_t *ppos)
+{
+	struct seq_file		*s = file->private_data;
+	struct dwc3		*dwc = s->private;
+	unsigned long		flags;
+	enum dwc3_link_state	state = 0;
+	char			buf[32];
+	u32			reg;
+	u8			speed;
+	int			ret;
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	if (!strncmp(buf, "SS.Disabled", 11))
+		state = DWC3_LINK_STATE_SS_DIS;
+	else if (!strncmp(buf, "Rx.Detect", 9))
+		state = DWC3_LINK_STATE_RX_DET;
+	else if (!strncmp(buf, "SS.Inactive", 11))
+		state = DWC3_LINK_STATE_SS_INACT;
+	else if (!strncmp(buf, "Recovery", 8))
+		state = DWC3_LINK_STATE_RECOV;
+	else if (!strncmp(buf, "Compliance", 10))
+		state = DWC3_LINK_STATE_CMPLY;
+	else if (!strncmp(buf, "Loopback", 8))
+		state = DWC3_LINK_STATE_LPBK;
+	else
+		return -EINVAL;
+
+	ret = pm_runtime_resume_and_get(dwc->dev);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	reg = dwc3_readl(dwc->regs, DWC3_GSTS);
+	if (DWC3_GSTS_CURMOD(reg) != DWC3_GSTS_CURMOD_DEVICE) {
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		pm_runtime_put_sync(dwc->dev);
+		return -EINVAL;
+	}
+
+	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+	speed = reg & DWC3_DSTS_CONNECTSPD;
+
+	if (speed < DWC3_DSTS_SUPERSPEED &&
+	    state != DWC3_LINK_STATE_RECOV) {
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		pm_runtime_put_sync(dwc->dev);
+		return -EINVAL;
+	}
+
+	dwc3_gadget_set_link_state(dwc, state);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	pm_runtime_put_sync(dwc->dev);
+
+	return count;
+}
+
+static const struct file_operations dwc3_link_state_fops = {
+	.open			= dwc3_link_state_open,
+	.write			= dwc3_link_state_write,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
+struct dwc3_ep_file_map {
+	const char name[25];
+	const struct file_operations *const fops;
+};
+
+static int dwc3_tx_fifo_size_show(struct seq_file *s, void *unused)
+{
+	struct dwc3_ep		*dep = s->private;
+	struct dwc3		*dwc = dep->dwc;
+	unsigned long		flags;
+	u32			mdwidth;
+	u32			val;
+	int			ret;
+
+	ret = pm_runtime_resume_and_get(dwc->dev);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	val = dwc3_core_fifo_space(dep, DWC3_TXFIFO);
+
+	/* Convert to bytes */
+	mdwidth = dwc3_mdwidth(dwc);
+
+	val *= mdwidth;
+	val >>= 3;
+	seq_printf(s, "%u\n", val);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	pm_runtime_put_sync(dwc->dev);
+
+	return 0;
+}
+
+static int dwc3_rx_fifo_size_show(struct seq_file *s, void *unused)
+{
+	struct dwc3_ep		*dep = s->private;
+	struct dwc3		*dwc = dep->dwc;
+	unsigned long		flags;
+	u32			mdwidth;
+	u32			val;
+	int			ret;
+
+	ret = pm_runtime_resume_and_get(dwc->dev);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	val = dwc3_core_fifo_space(dep, DWC3_RXFIFO);
+
+	/* Convert to bytes */
+	mdwidth = dwc3_mdwidth(dwc);
+
+	val *= mdwidth;
+	val >>= 3;
+	seq_printf(s, "%u\n", val);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	pm_runtime_put_sync(dwc->dev);
+
+	return 0;
+}
+
+static int dwc3_tx_request_queue_show(struct seq_file *s, void *unused)
+{
+	struct dwc3_ep		*dep = s->private;
+	struct dwc3		*dwc = dep->dwc;
+	unsigned long		flags;
+	u32			val;
+	int			ret;
+
+	ret = pm_runtime_resume_and_get(dwc->dev);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	val = dwc3_core_fifo_space(dep, DWC3_TXREQQ);
+	seq_printf(s, "%u\n", val);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	pm_runtime_put_sync(dwc->dev);
+
+	return 0;
+}
+
+static int dwc3_rx_request_queue_show(struct seq_file *s, void *unused)
+{
+	struct dwc3_ep		*dep = s->private;
+	struct dwc3		*dwc = dep->dwc;
+	unsigned long		flags;
+	u32			val;
+	int			ret;
+
+	ret = pm_runtime_resume_and_get(dwc->dev);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	val = dwc3_core_fifo_space(dep, DWC3_RXREQQ);
+	seq_printf(s, "%u\n", val);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	pm_runtime_put_sync(dwc->dev);
+
+	return 0;
+}
+
+static int dwc3_rx_info_queue_show(struct seq_file *s, void *unused)
+{
+	struct dwc3_ep		*dep = s->private;
+	struct dwc3		*dwc = dep->dwc;
+	unsigned long		flags;
+	u32			val;
+	int			ret;
+
+	ret = pm_runtime_resume_and_get(dwc->dev);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	val = dwc3_core_fifo_space(dep, DWC3_RXINFOQ);
+	seq_printf(s, "%u\n", val);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	pm_runtime_put_sync(dwc->dev);
+
+	return 0;
+}
+
+static int dwc3_descriptor_fetch_queue_show(struct seq_file *s, void *unused)
+{
+	struct dwc3_ep		*dep = s->private;
+	struct dwc3		*dwc = dep->dwc;
+	unsigned long		flags;
+	u32			val;
+	int			ret;
+
+	ret = pm_runtime_resume_and_get(dwc->dev);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	val = dwc3_core_fifo_space(dep, DWC3_DESCFETCHQ);
+	seq_printf(s, "%u\n", val);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	pm_runtime_put_sync(dwc->dev);
+
+	return 0;
+}
+
+static int dwc3_event_queue_show(struct seq_file *s, void *unused)
+{
+	struct dwc3_ep		*dep = s->private;
+	struct dwc3		*dwc = dep->dwc;
+	unsigned long		flags;
+	u32			val;
+	int			ret;
+
+	ret = pm_runtime_resume_and_get(dwc->dev);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	val = dwc3_core_fifo_space(dep, DWC3_EVENTQ);
+	seq_printf(s, "%u\n", val);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	pm_runtime_put_sync(dwc->dev);
+
+	return 0;
+}
+
+static int dwc3_transfer_type_show(struct seq_file *s, void *unused)
+{
+	struct dwc3_ep		*dep = s->private;
+	struct dwc3		*dwc = dep->dwc;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	if (!(dep->flags & DWC3_EP_ENABLED) || !dep->endpoint.desc) {
+		seq_puts(s, "--\n");
+		goto out;
+	}
+
+	switch (usb_endpoint_type(dep->endpoint.desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		seq_puts(s, "control\n");
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		seq_puts(s, "isochronous\n");
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		seq_puts(s, "bulk\n");
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		seq_puts(s, "interrupt\n");
+		break;
+	default:
+		seq_puts(s, "--\n");
+	}
+
+out:
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
+}
+
+static int dwc3_trb_ring_show(struct seq_file *s, void *unused)
+{
+	struct dwc3_ep		*dep = s->private;
+	struct dwc3		*dwc = dep->dwc;
+	unsigned long		flags;
+	int			i;
+	int			ret;
+
+	ret = pm_runtime_resume_and_get(dwc->dev);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	if (dep->number <= 1) {
+		seq_puts(s, "--\n");
+		goto out;
+	}
+
+	seq_puts(s, "buffer_addr,size,type,ioc,isp_imi,csp,chn,lst,hwo\n");
+
+	for (i = 0; i < DWC3_TRB_NUM; i++) {
+		struct dwc3_trb *trb = &dep->trb_pool[i];
+		unsigned int type = DWC3_TRBCTL_TYPE(trb->ctrl);
+
+		seq_printf(s, "%08x%08x,%d,%s,%d,%d,%d,%d,%d,%d       %c%c\n",
+				trb->bph, trb->bpl, trb->size,
+				dwc3_trb_type_string(type),
+				!!(trb->ctrl & DWC3_TRB_CTRL_IOC),
+				!!(trb->ctrl & DWC3_TRB_CTRL_ISP_IMI),
+				!!(trb->ctrl & DWC3_TRB_CTRL_CSP),
+				!!(trb->ctrl & DWC3_TRB_CTRL_CHN),
+				!!(trb->ctrl & DWC3_TRB_CTRL_LST),
+				!!(trb->ctrl & DWC3_TRB_CTRL_HWO),
+				dep->trb_enqueue == i ? 'E' : ' ',
+				dep->trb_dequeue == i ? 'D' : ' ');
+	}
+
+out:
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	pm_runtime_put_sync(dwc->dev);
+
+	return 0;
+}
+
+static int dwc3_ep_info_register_show(struct seq_file *s, void *unused)
+{
+	struct dwc3_ep		*dep = s->private;
+	struct dwc3		*dwc = dep->dwc;
+	unsigned long		flags;
+	u64			ep_info;
+	u32			lower_32_bits;
+	u32			upper_32_bits;
+	u32			reg;
+	int			ret;
+
+	ret = pm_runtime_resume_and_get(dwc->dev);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	reg = DWC3_GDBGLSPMUX_EPSELECT(dep->number);
+	dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg);
+
+	lower_32_bits = dwc3_readl(dwc->regs, DWC3_GDBGEPINFO0);
+	upper_32_bits = dwc3_readl(dwc->regs, DWC3_GDBGEPINFO1);
+
+	ep_info = ((u64)upper_32_bits << 32) | lower_32_bits;
+	seq_printf(s, "0x%016llx\n", ep_info);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	pm_runtime_put_sync(dwc->dev);
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(dwc3_tx_fifo_size);
+DEFINE_SHOW_ATTRIBUTE(dwc3_rx_fifo_size);
+DEFINE_SHOW_ATTRIBUTE(dwc3_tx_request_queue);
+DEFINE_SHOW_ATTRIBUTE(dwc3_rx_request_queue);
+DEFINE_SHOW_ATTRIBUTE(dwc3_rx_info_queue);
+DEFINE_SHOW_ATTRIBUTE(dwc3_descriptor_fetch_queue);
+DEFINE_SHOW_ATTRIBUTE(dwc3_event_queue);
+DEFINE_SHOW_ATTRIBUTE(dwc3_transfer_type);
+DEFINE_SHOW_ATTRIBUTE(dwc3_trb_ring);
+DEFINE_SHOW_ATTRIBUTE(dwc3_ep_info_register);
+
+static const struct dwc3_ep_file_map dwc3_ep_file_map[] = {
+	{ "tx_fifo_size", &dwc3_tx_fifo_size_fops, },
+	{ "rx_fifo_size", &dwc3_rx_fifo_size_fops, },
+	{ "tx_request_queue", &dwc3_tx_request_queue_fops, },
+	{ "rx_request_queue", &dwc3_rx_request_queue_fops, },
+	{ "rx_info_queue", &dwc3_rx_info_queue_fops, },
+	{ "descriptor_fetch_queue", &dwc3_descriptor_fetch_queue_fops, },
+	{ "event_queue", &dwc3_event_queue_fops, },
+	{ "transfer_type", &dwc3_transfer_type_fops, },
+	{ "trb_ring", &dwc3_trb_ring_fops, },
+	{ "GDBGEPINFO", &dwc3_ep_info_register_fops, },
+};
+
+void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep)
+{
+	struct dentry		*dir;
+	int			i;
+
+	dir = debugfs_create_dir(dep->name, dep->dwc->debug_root);
+	for (i = 0; i < ARRAY_SIZE(dwc3_ep_file_map); i++) {
+		const struct file_operations *fops = dwc3_ep_file_map[i].fops;
+		const char *name = dwc3_ep_file_map[i].name;
+
+		debugfs_create_file(name, 0444, dir, dep, fops);
+	}
+}
+
+void dwc3_debugfs_remove_endpoint_dir(struct dwc3_ep *dep)
+{
+	debugfs_lookup_and_remove(dep->name, dep->dwc->debug_root);
+}
+
+void dwc3_debugfs_init(struct dwc3 *dwc)
+{
+	struct dentry		*root;
+
+	dwc->regset = kzalloc(sizeof(*dwc->regset), GFP_KERNEL);
+	if (!dwc->regset)
+		return;
+
+	dwc->dbg_lsp_select = DWC3_LSP_MUX_UNSELECTED;
+
+	dwc->regset->regs = dwc3_regs;
+	dwc->regset->nregs = ARRAY_SIZE(dwc3_regs);
+	dwc->regset->base = dwc->regs - DWC3_GLOBALS_REGS_START;
+	dwc->regset->dev = dwc->dev;
+
+	root = debugfs_create_dir(dev_name(dwc->dev), usb_debug_root);
+	dwc->debug_root = root;
+	debugfs_create_regset32("regdump", 0444, root, dwc->regset);
+	debugfs_create_file("lsp_dump", 0644, root, dwc, &dwc3_lsp_fops);
+
+	if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE))
+		debugfs_create_file("mode", 0644, root, dwc,
+				    &dwc3_mode_fops);
+
+	if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) ||
+			IS_ENABLED(CONFIG_USB_DWC3_GADGET)) {
+		debugfs_create_file("testmode", 0644, root, dwc,
+				&dwc3_testmode_fops);
+		debugfs_create_file("link_state", 0644, root, dwc,
+				    &dwc3_link_state_fops);
+	}
+}
+
+void dwc3_debugfs_exit(struct dwc3 *dwc)
+{
+	debugfs_lookup_and_remove(dev_name(dwc->dev), usb_debug_root);
+	kfree(dwc->regset);
+}
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
new file mode 100644
index 000000000..57ddd2e43
--- /dev/null
+++ b/drivers/usb/dwc3/drd.c
@@ -0,0 +1,622 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * drd.c - DesignWare USB3 DRD Controller Dual-role support
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Authors: Roger Quadros <rogerq@ti.com>
+ */
+
+#include <linux/extcon.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+#include "debug.h"
+#include "core.h"
+#include "gadget.h"
+
+static void dwc3_otg_disable_events(struct dwc3 *dwc, u32 disable_mask)
+{
+	u32 reg = dwc3_readl(dwc->regs, DWC3_OEVTEN);
+
+	reg &= ~(disable_mask);
+	dwc3_writel(dwc->regs, DWC3_OEVTEN, reg);
+}
+
+static void dwc3_otg_enable_events(struct dwc3 *dwc, u32 enable_mask)
+{
+	u32 reg = dwc3_readl(dwc->regs, DWC3_OEVTEN);
+
+	reg |= (enable_mask);
+	dwc3_writel(dwc->regs, DWC3_OEVTEN, reg);
+}
+
+static void dwc3_otg_clear_events(struct dwc3 *dwc)
+{
+	u32 reg = dwc3_readl(dwc->regs, DWC3_OEVT);
+
+	dwc3_writel(dwc->regs, DWC3_OEVTEN, reg);
+}
+
+#define DWC3_OTG_ALL_EVENTS	(DWC3_OEVTEN_XHCIRUNSTPSETEN | \
+		DWC3_OEVTEN_DEVRUNSTPSETEN | DWC3_OEVTEN_HIBENTRYEN | \
+		DWC3_OEVTEN_CONIDSTSCHNGEN | DWC3_OEVTEN_HRRCONFNOTIFEN | \
+		DWC3_OEVTEN_HRRINITNOTIFEN | DWC3_OEVTEN_ADEVIDLEEN | \
+		DWC3_OEVTEN_ADEVBHOSTENDEN | DWC3_OEVTEN_ADEVHOSTEN | \
+		DWC3_OEVTEN_ADEVHNPCHNGEN | DWC3_OEVTEN_ADEVSRPDETEN | \
+		DWC3_OEVTEN_ADEVSESSENDDETEN | DWC3_OEVTEN_BDEVBHOSTENDEN | \
+		DWC3_OEVTEN_BDEVHNPCHNGEN | DWC3_OEVTEN_BDEVSESSVLDDETEN | \
+		DWC3_OEVTEN_BDEVVBUSCHNGEN)
+
+static irqreturn_t dwc3_otg_thread_irq(int irq, void *_dwc)
+{
+	struct dwc3 *dwc = _dwc;
+
+	spin_lock(&dwc->lock);
+	if (dwc->otg_restart_host) {
+		dwc3_otg_host_init(dwc);
+		dwc->otg_restart_host = false;
+	}
+
+	spin_unlock(&dwc->lock);
+
+	dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t dwc3_otg_irq(int irq, void *_dwc)
+{
+	u32 reg;
+	struct dwc3 *dwc = _dwc;
+	irqreturn_t ret = IRQ_NONE;
+
+	reg = dwc3_readl(dwc->regs, DWC3_OEVT);
+	if (reg) {
+		/* ignore non OTG events, we can't disable them in OEVTEN */
+		if (!(reg & DWC3_OTG_ALL_EVENTS)) {
+			dwc3_writel(dwc->regs, DWC3_OEVT, reg);
+			return IRQ_NONE;
+		}
+
+		if (dwc->current_otg_role == DWC3_OTG_ROLE_HOST &&
+		    !(reg & DWC3_OEVT_DEVICEMODE))
+			dwc->otg_restart_host = true;
+		dwc3_writel(dwc->regs, DWC3_OEVT, reg);
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	return ret;
+}
+
+static void dwc3_otgregs_init(struct dwc3 *dwc)
+{
+	u32 reg;
+
+	/*
+	 * Prevent host/device reset from resetting OTG core.
+	 * If we don't do this then xhci_reset (USBCMD.HCRST) will reset
+	 * the signal outputs sent to the PHY, the OTG FSM logic of the
+	 * core and also the resets to the VBUS filters inside the core.
+	 */
+	reg = dwc3_readl(dwc->regs, DWC3_OCFG);
+	reg |= DWC3_OCFG_SFTRSTMASK;
+	dwc3_writel(dwc->regs, DWC3_OCFG, reg);
+
+	/* Disable hibernation for simplicity */
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg &= ~DWC3_GCTL_GBLHIBERNATIONEN;
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+	/*
+	 * Initialize OTG registers as per
+	 * Figure 11-4 OTG Driver Overall Programming Flow
+	 */
+	/* OCFG.SRPCap = 0, OCFG.HNPCap = 0 */
+	reg = dwc3_readl(dwc->regs, DWC3_OCFG);
+	reg &= ~(DWC3_OCFG_SRPCAP | DWC3_OCFG_HNPCAP);
+	dwc3_writel(dwc->regs, DWC3_OCFG, reg);
+	/* OEVT = FFFF */
+	dwc3_otg_clear_events(dwc);
+	/* OEVTEN = 0 */
+	dwc3_otg_disable_events(dwc, DWC3_OTG_ALL_EVENTS);
+	/* OEVTEN.ConIDStsChngEn = 1. Instead we enable all events */
+	dwc3_otg_enable_events(dwc, DWC3_OTG_ALL_EVENTS);
+	/*
+	 * OCTL.PeriMode = 1, OCTL.DevSetHNPEn = 0, OCTL.HstSetHNPEn = 0,
+	 * OCTL.HNPReq = 0
+	 */
+	reg = dwc3_readl(dwc->regs, DWC3_OCTL);
+	reg |= DWC3_OCTL_PERIMODE;
+	reg &= ~(DWC3_OCTL_DEVSETHNPEN | DWC3_OCTL_HSTSETHNPEN |
+		 DWC3_OCTL_HNPREQ);
+	dwc3_writel(dwc->regs, DWC3_OCTL, reg);
+}
+
+static int dwc3_otg_get_irq(struct dwc3 *dwc)
+{
+	struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
+	int irq;
+
+	irq = platform_get_irq_byname_optional(dwc3_pdev, "otg");
+	if (irq > 0)
+		goto out;
+
+	if (irq == -EPROBE_DEFER)
+		goto out;
+
+	irq = platform_get_irq_byname_optional(dwc3_pdev, "dwc_usb3");
+	if (irq > 0)
+		goto out;
+
+	if (irq == -EPROBE_DEFER)
+		goto out;
+
+	irq = platform_get_irq(dwc3_pdev, 0);
+	if (irq > 0)
+		goto out;
+
+	if (!irq)
+		irq = -EINVAL;
+
+out:
+	return irq;
+}
+
+void dwc3_otg_init(struct dwc3 *dwc)
+{
+	u32 reg;
+
+	/*
+	 * As per Figure 11-4 OTG Driver Overall Programming Flow,
+	 * block "Initialize GCTL for OTG operation".
+	 */
+	/* GCTL.PrtCapDir=2'b11 */
+	dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG);
+	/* GUSB2PHYCFG0.SusPHY=0 */
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+	reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+
+	/* Initialize OTG registers */
+	dwc3_otgregs_init(dwc);
+}
+
+void dwc3_otg_exit(struct dwc3 *dwc)
+{
+	/* disable all OTG IRQs */
+	dwc3_otg_disable_events(dwc, DWC3_OTG_ALL_EVENTS);
+	/* clear all events */
+	dwc3_otg_clear_events(dwc);
+}
+
+/* should be called before Host controller driver is started */
+void dwc3_otg_host_init(struct dwc3 *dwc)
+{
+	u32 reg;
+
+	/* As per Figure 11-10 A-Device Flow Diagram */
+	/* OCFG.HNPCap = 0, OCFG.SRPCap = 0. Already 0 */
+
+	/*
+	 * OCTL.PeriMode=0, OCTL.TermSelDLPulse = 0,
+	 * OCTL.DevSetHNPEn = 0, OCTL.HstSetHNPEn = 0
+	 */
+	reg = dwc3_readl(dwc->regs, DWC3_OCTL);
+	reg &= ~(DWC3_OCTL_PERIMODE | DWC3_OCTL_TERMSELIDPULSE |
+			DWC3_OCTL_DEVSETHNPEN | DWC3_OCTL_HSTSETHNPEN);
+	dwc3_writel(dwc->regs, DWC3_OCTL, reg);
+
+	/*
+	 * OCFG.DisPrtPwrCutoff = 0/1
+	 */
+	reg = dwc3_readl(dwc->regs, DWC3_OCFG);
+	reg &= ~DWC3_OCFG_DISPWRCUTTOFF;
+	dwc3_writel(dwc->regs, DWC3_OCFG, reg);
+
+	/*
+	 * OCFG.SRPCap = 1, OCFG.HNPCap = GHWPARAMS6.HNP_CAP
+	 * We don't want SRP/HNP for simple dual-role so leave
+	 * these disabled.
+	 */
+
+	/*
+	 * OEVTEN.OTGADevHostEvntEn = 1
+	 * OEVTEN.OTGADevSessEndDetEvntEn = 1
+	 * We don't want HNP/role-swap so leave these disabled.
+	 */
+
+	/* GUSB2PHYCFG.ULPIAutoRes = 1/0, GUSB2PHYCFG.SusPHY = 1 */
+	if (!dwc->dis_u2_susphy_quirk) {
+		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+		reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+	}
+
+	/* Set Port Power to enable VBUS: OCTL.PrtPwrCtl = 1 */
+	reg = dwc3_readl(dwc->regs, DWC3_OCTL);
+	reg |= DWC3_OCTL_PRTPWRCTL;
+	dwc3_writel(dwc->regs, DWC3_OCTL, reg);
+}
+
+/* should be called after Host controller driver is stopped */
+static void dwc3_otg_host_exit(struct dwc3 *dwc)
+{
+	u32 reg;
+
+	/*
+	 * Exit from A-device flow as per
+	 * Figure 11-4 OTG Driver Overall Programming Flow
+	 */
+
+	/*
+	 * OEVTEN.OTGADevBHostEndEvntEn=0, OEVTEN.OTGADevHNPChngEvntEn=0
+	 * OEVTEN.OTGADevSessEndDetEvntEn=0,
+	 * OEVTEN.OTGADevHostEvntEn = 0
+	 * But we don't disable any OTG events
+	 */
+
+	/* OCTL.HstSetHNPEn = 0, OCTL.PrtPwrCtl=0 */
+	reg = dwc3_readl(dwc->regs, DWC3_OCTL);
+	reg &= ~(DWC3_OCTL_HSTSETHNPEN | DWC3_OCTL_PRTPWRCTL);
+	dwc3_writel(dwc->regs, DWC3_OCTL, reg);
+}
+
+/* should be called before the gadget controller driver is started */
+static void dwc3_otg_device_init(struct dwc3 *dwc)
+{
+	u32 reg;
+
+	/* As per Figure 11-20 B-Device Flow Diagram */
+
+	/*
+	 * OCFG.HNPCap = GHWPARAMS6.HNP_CAP, OCFG.SRPCap = 1
+	 * but we keep them 0 for simple dual-role operation.
+	 */
+	reg = dwc3_readl(dwc->regs, DWC3_OCFG);
+	/* OCFG.OTGSftRstMsk = 0/1 */
+	reg |= DWC3_OCFG_SFTRSTMASK;
+	dwc3_writel(dwc->regs, DWC3_OCFG, reg);
+	/*
+	 * OCTL.PeriMode = 1
+	 * OCTL.TermSelDLPulse = 0/1, OCTL.HNPReq = 0
+	 * OCTL.DevSetHNPEn = 0, OCTL.HstSetHNPEn = 0
+	 */
+	reg = dwc3_readl(dwc->regs, DWC3_OCTL);
+	reg |= DWC3_OCTL_PERIMODE;
+	reg &= ~(DWC3_OCTL_TERMSELIDPULSE | DWC3_OCTL_HNPREQ |
+			DWC3_OCTL_DEVSETHNPEN | DWC3_OCTL_HSTSETHNPEN);
+	dwc3_writel(dwc->regs, DWC3_OCTL, reg);
+	/* OEVTEN.OTGBDevSesVldDetEvntEn = 1 */
+	dwc3_otg_enable_events(dwc, DWC3_OEVTEN_BDEVSESSVLDDETEN);
+	/* GUSB2PHYCFG.ULPIAutoRes = 0, GUSB2PHYCFG0.SusPHY = 1 */
+	if (!dwc->dis_u2_susphy_quirk) {
+		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+		reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+	}
+	/* GCTL.GblHibernationEn = 0. Already 0. */
+}
+
+/* should be called after the gadget controller driver is stopped */
+static void dwc3_otg_device_exit(struct dwc3 *dwc)
+{
+	u32 reg;
+
+	/*
+	 * Exit from B-device flow as per
+	 * Figure 11-4 OTG Driver Overall Programming Flow
+	 */
+
+	/*
+	 * OEVTEN.OTGBDevHNPChngEvntEn = 0
+	 * OEVTEN.OTGBDevVBusChngEvntEn = 0
+	 * OEVTEN.OTGBDevBHostEndEvntEn = 0
+	 */
+	dwc3_otg_disable_events(dwc, DWC3_OEVTEN_BDEVHNPCHNGEN |
+				DWC3_OEVTEN_BDEVVBUSCHNGEN |
+				DWC3_OEVTEN_BDEVBHOSTENDEN);
+
+	/* OCTL.DevSetHNPEn = 0, OCTL.HNPReq = 0, OCTL.PeriMode=1 */
+	reg = dwc3_readl(dwc->regs, DWC3_OCTL);
+	reg &= ~(DWC3_OCTL_DEVSETHNPEN | DWC3_OCTL_HNPREQ);
+	reg |= DWC3_OCTL_PERIMODE;
+	dwc3_writel(dwc->regs, DWC3_OCTL, reg);
+}
+
+void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
+{
+	int ret;
+	u32 reg;
+	int id;
+	unsigned long flags;
+
+	if (dwc->dr_mode != USB_DR_MODE_OTG)
+		return;
+
+	/* don't do anything if debug user changed role to not OTG */
+	if (dwc->current_dr_role != DWC3_GCTL_PRTCAP_OTG)
+		return;
+
+	if (!ignore_idstatus) {
+		reg = dwc3_readl(dwc->regs, DWC3_OSTS);
+		id = !!(reg & DWC3_OSTS_CONIDSTS);
+
+		dwc->desired_otg_role = id ? DWC3_OTG_ROLE_DEVICE :
+					DWC3_OTG_ROLE_HOST;
+	}
+
+	if (dwc->desired_otg_role == dwc->current_otg_role)
+		return;
+
+	switch (dwc->current_otg_role) {
+	case DWC3_OTG_ROLE_HOST:
+		dwc3_host_exit(dwc);
+		spin_lock_irqsave(&dwc->lock, flags);
+		dwc3_otg_host_exit(dwc);
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		break;
+	case DWC3_OTG_ROLE_DEVICE:
+		dwc3_gadget_exit(dwc);
+		spin_lock_irqsave(&dwc->lock, flags);
+		dwc3_event_buffers_cleanup(dwc);
+		dwc3_otg_device_exit(dwc);
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		break;
+	default:
+		break;
+	}
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	dwc->current_otg_role = dwc->desired_otg_role;
+
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	switch (dwc->desired_otg_role) {
+	case DWC3_OTG_ROLE_HOST:
+		spin_lock_irqsave(&dwc->lock, flags);
+		dwc3_otgregs_init(dwc);
+		dwc3_otg_host_init(dwc);
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		ret = dwc3_host_init(dwc);
+		if (ret) {
+			dev_err(dwc->dev, "failed to initialize host\n");
+		} else {
+			if (dwc->usb2_phy)
+				otg_set_vbus(dwc->usb2_phy->otg, true);
+			if (dwc->usb2_generic_phy)
+				phy_set_mode(dwc->usb2_generic_phy,
+					     PHY_MODE_USB_HOST);
+		}
+		break;
+	case DWC3_OTG_ROLE_DEVICE:
+		spin_lock_irqsave(&dwc->lock, flags);
+		dwc3_otgregs_init(dwc);
+		dwc3_otg_device_init(dwc);
+		dwc3_event_buffers_setup(dwc);
+		spin_unlock_irqrestore(&dwc->lock, flags);
+
+		if (dwc->usb2_phy)
+			otg_set_vbus(dwc->usb2_phy->otg, false);
+		if (dwc->usb2_generic_phy)
+			phy_set_mode(dwc->usb2_generic_phy,
+				     PHY_MODE_USB_DEVICE);
+		ret = dwc3_gadget_init(dwc);
+		if (ret)
+			dev_err(dwc->dev, "failed to initialize peripheral\n");
+		break;
+	default:
+		break;
+	}
+}
+
+static void dwc3_drd_update(struct dwc3 *dwc)
+{
+	int id;
+
+	if (dwc->edev) {
+		id = extcon_get_state(dwc->edev, EXTCON_USB_HOST);
+		if (id < 0)
+			id = 0;
+		dwc3_set_mode(dwc, id ?
+			      DWC3_GCTL_PRTCAP_HOST :
+			      DWC3_GCTL_PRTCAP_DEVICE);
+	}
+}
+
+static int dwc3_drd_notifier(struct notifier_block *nb,
+			     unsigned long event, void *ptr)
+{
+	struct dwc3 *dwc = container_of(nb, struct dwc3, edev_nb);
+
+	dwc3_set_mode(dwc, event ?
+		      DWC3_GCTL_PRTCAP_HOST :
+		      DWC3_GCTL_PRTCAP_DEVICE);
+
+	return NOTIFY_DONE;
+}
+
+#if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
+#define ROLE_SWITCH 1
+static int dwc3_usb_role_switch_set(struct usb_role_switch *sw,
+				    enum usb_role role)
+{
+	struct dwc3 *dwc = usb_role_switch_get_drvdata(sw);
+	u32 mode;
+
+	switch (role) {
+	case USB_ROLE_HOST:
+		mode = DWC3_GCTL_PRTCAP_HOST;
+		break;
+	case USB_ROLE_DEVICE:
+		mode = DWC3_GCTL_PRTCAP_DEVICE;
+		break;
+	default:
+		if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
+			mode = DWC3_GCTL_PRTCAP_HOST;
+		else
+			mode = DWC3_GCTL_PRTCAP_DEVICE;
+		break;
+	}
+
+	dwc3_set_mode(dwc, mode);
+	return 0;
+}
+
+static enum usb_role dwc3_usb_role_switch_get(struct usb_role_switch *sw)
+{
+	struct dwc3 *dwc = usb_role_switch_get_drvdata(sw);
+	unsigned long flags;
+	enum usb_role role;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_HOST:
+		role = USB_ROLE_HOST;
+		break;
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		role = USB_ROLE_DEVICE;
+		break;
+	case DWC3_GCTL_PRTCAP_OTG:
+		role = dwc->current_otg_role;
+		break;
+	default:
+		if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
+			role = USB_ROLE_HOST;
+		else
+			role = USB_ROLE_DEVICE;
+		break;
+	}
+	spin_unlock_irqrestore(&dwc->lock, flags);
+	return role;
+}
+
+static int dwc3_setup_role_switch(struct dwc3 *dwc)
+{
+	struct usb_role_switch_desc dwc3_role_switch = {NULL};
+	u32 mode;
+
+	dwc->role_switch_default_mode = usb_get_role_switch_default_mode(dwc->dev);
+	if (dwc->role_switch_default_mode == USB_DR_MODE_HOST) {
+		mode = DWC3_GCTL_PRTCAP_HOST;
+	} else {
+		dwc->role_switch_default_mode = USB_DR_MODE_PERIPHERAL;
+		mode = DWC3_GCTL_PRTCAP_DEVICE;
+	}
+	dwc3_set_mode(dwc, mode);
+
+	dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
+	dwc3_role_switch.set = dwc3_usb_role_switch_set;
+	dwc3_role_switch.get = dwc3_usb_role_switch_get;
+	dwc3_role_switch.driver_data = dwc;
+	dwc->role_sw = usb_role_switch_register(dwc->dev, &dwc3_role_switch);
+	if (IS_ERR(dwc->role_sw))
+		return PTR_ERR(dwc->role_sw);
+
+	if (dwc->dev->of_node) {
+		/* populate connector entry */
+		int ret = devm_of_platform_populate(dwc->dev);
+
+		if (ret) {
+			usb_role_switch_unregister(dwc->role_sw);
+			dwc->role_sw = NULL;
+			dev_err(dwc->dev, "DWC3 platform devices creation failed: %i\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+#else
+#define ROLE_SWITCH 0
+#define dwc3_setup_role_switch(x) 0
+#endif
+
+int dwc3_drd_init(struct dwc3 *dwc)
+{
+	int ret, irq;
+
+	if (ROLE_SWITCH &&
+	    device_property_read_bool(dwc->dev, "usb-role-switch"))
+		return dwc3_setup_role_switch(dwc);
+
+	if (dwc->edev) {
+		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
+		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
+					       &dwc->edev_nb);
+		if (ret < 0) {
+			dev_err(dwc->dev, "couldn't register cable notifier\n");
+			return ret;
+		}
+
+		dwc3_drd_update(dwc);
+	} else {
+		dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG);
+
+		/* use OTG block to get ID event */
+		irq = dwc3_otg_get_irq(dwc);
+		if (irq < 0)
+			return irq;
+
+		dwc->otg_irq = irq;
+
+		/* disable all OTG IRQs */
+		dwc3_otg_disable_events(dwc, DWC3_OTG_ALL_EVENTS);
+		/* clear all events */
+		dwc3_otg_clear_events(dwc);
+
+		ret = request_threaded_irq(dwc->otg_irq, dwc3_otg_irq,
+					   dwc3_otg_thread_irq,
+					   IRQF_SHARED, "dwc3-otg", dwc);
+		if (ret) {
+			dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
+				dwc->otg_irq, ret);
+			ret = -ENODEV;
+			return ret;
+		}
+
+		dwc3_otg_init(dwc);
+		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
+	}
+
+	return 0;
+}
+
+void dwc3_drd_exit(struct dwc3 *dwc)
+{
+	unsigned long flags;
+
+	if (dwc->role_sw)
+		usb_role_switch_unregister(dwc->role_sw);
+
+	if (dwc->edev)
+		extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST,
+					   &dwc->edev_nb);
+
+	cancel_work_sync(&dwc->drd_work);
+
+	/* debug user might have changed role, clean based on current role */
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_HOST:
+		dwc3_host_exit(dwc);
+		break;
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		dwc3_gadget_exit(dwc);
+		dwc3_event_buffers_cleanup(dwc);
+		break;
+	case DWC3_GCTL_PRTCAP_OTG:
+		dwc3_otg_exit(dwc);
+		spin_lock_irqsave(&dwc->lock, flags);
+		dwc->desired_otg_role = DWC3_OTG_ROLE_IDLE;
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		dwc3_otg_update(dwc, 1);
+		break;
+	default:
+		break;
+	}
+
+	if (dwc->otg_irq)
+		free_irq(dwc->otg_irq, dwc);
+}
diff --git a/drivers/usb/dwc3/dwc3-am62.c b/drivers/usb/dwc3/dwc3-am62.c
new file mode 100644
index 000000000..173cf3579
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-am62.c
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dwc3-am62.c - TI specific Glue layer for AM62 DWC3 USB Controller
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/regmap.h>
+#include <linux/pinctrl/consumer.h>
+
+/* USB WRAPPER register offsets */
+#define USBSS_PID			0x0
+#define USBSS_OVERCURRENT_CTRL		0x4
+#define USBSS_PHY_CONFIG		0x8
+#define USBSS_PHY_TEST			0xc
+#define USBSS_CORE_STAT			0x14
+#define USBSS_HOST_VBUS_CTRL		0x18
+#define USBSS_MODE_CONTROL		0x1c
+#define USBSS_WAKEUP_CONFIG		0x30
+#define USBSS_WAKEUP_STAT		0x34
+#define USBSS_OVERRIDE_CONFIG		0x38
+#define USBSS_IRQ_MISC_STATUS_RAW	0x430
+#define USBSS_IRQ_MISC_STATUS		0x434
+#define USBSS_IRQ_MISC_ENABLE_SET	0x438
+#define USBSS_IRQ_MISC_ENABLE_CLR	0x43c
+#define USBSS_IRQ_MISC_EOI		0x440
+#define USBSS_INTR_TEST			0x490
+#define USBSS_VBUS_FILTER		0x614
+#define USBSS_VBUS_STAT			0x618
+#define USBSS_DEBUG_CFG			0x708
+#define USBSS_DEBUG_DATA		0x70c
+#define USBSS_HOST_HUB_CTRL		0x714
+
+/* PHY CONFIG register bits */
+#define USBSS_PHY_VBUS_SEL_MASK		GENMASK(2, 1)
+#define USBSS_PHY_VBUS_SEL_SHIFT	1
+#define USBSS_PHY_LANE_REVERSE		BIT(0)
+
+/* MODE CONTROL register bits */
+#define USBSS_MODE_VALID	BIT(0)
+
+/* WAKEUP CONFIG register bits */
+#define USBSS_WAKEUP_CFG_OVERCURRENT_EN	BIT(3)
+#define USBSS_WAKEUP_CFG_LINESTATE_EN	BIT(2)
+#define USBSS_WAKEUP_CFG_SESSVALID_EN	BIT(1)
+#define USBSS_WAKEUP_CFG_VBUSVALID_EN	BIT(0)
+
+/* WAKEUP STAT register bits */
+#define USBSS_WAKEUP_STAT_OVERCURRENT	BIT(4)
+#define USBSS_WAKEUP_STAT_LINESTATE	BIT(3)
+#define USBSS_WAKEUP_STAT_SESSVALID	BIT(2)
+#define USBSS_WAKEUP_STAT_VBUSVALID	BIT(1)
+#define USBSS_WAKEUP_STAT_CLR		BIT(0)
+
+/* IRQ_MISC_STATUS_RAW register bits */
+#define USBSS_IRQ_MISC_RAW_VBUSVALID	BIT(22)
+#define USBSS_IRQ_MISC_RAW_SESSVALID	BIT(20)
+
+/* IRQ_MISC_STATUS register bits */
+#define USBSS_IRQ_MISC_VBUSVALID	BIT(22)
+#define USBSS_IRQ_MISC_SESSVALID	BIT(20)
+
+/* IRQ_MISC_ENABLE_SET register bits */
+#define USBSS_IRQ_MISC_ENABLE_SET_VBUSVALID	BIT(22)
+#define USBSS_IRQ_MISC_ENABLE_SET_SESSVALID	BIT(20)
+
+/* IRQ_MISC_ENABLE_CLR register bits */
+#define USBSS_IRQ_MISC_ENABLE_CLR_VBUSVALID	BIT(22)
+#define USBSS_IRQ_MISC_ENABLE_CLR_SESSVALID	BIT(20)
+
+/* IRQ_MISC_EOI register bits */
+#define USBSS_IRQ_MISC_EOI_VECTOR	BIT(0)
+
+/* VBUS_STAT register bits */
+#define USBSS_VBUS_STAT_SESSVALID	BIT(2)
+#define USBSS_VBUS_STAT_VBUSVALID	BIT(0)
+
+/* Mask for PHY PLL REFCLK */
+#define PHY_PLL_REFCLK_MASK	GENMASK(3, 0)
+
+#define DWC3_AM62_AUTOSUSPEND_DELAY	100
+
+struct dwc3_data {
+	struct device *dev;
+	void __iomem *usbss;
+	struct clk *usb2_refclk;
+	int rate_code;
+	struct regmap *syscon;
+	unsigned int offset;
+	unsigned int vbus_divider;
+};
+
+static const int dwc3_ti_rate_table[] = {	/* in KHZ */
+	9600,
+	10000,
+	12000,
+	19200,
+	20000,
+	24000,
+	25000,
+	26000,
+	38400,
+	40000,
+	58000,
+	50000,
+	52000,
+};
+
+static inline u32 dwc3_ti_readl(struct dwc3_data *data, u32 offset)
+{
+	return readl((data->usbss) + offset);
+}
+
+static inline void dwc3_ti_writel(struct dwc3_data *data, u32 offset, u32 value)
+{
+	writel(value, (data->usbss) + offset);
+}
+
+static int phy_syscon_pll_refclk(struct dwc3_data *data)
+{
+	struct device *dev = data->dev;
+	struct device_node *node = dev->of_node;
+	struct of_phandle_args args;
+	struct regmap *syscon;
+	int ret;
+
+	syscon = syscon_regmap_lookup_by_phandle(node, "ti,syscon-phy-pll-refclk");
+	if (IS_ERR(syscon)) {
+		dev_err(dev, "unable to get ti,syscon-phy-pll-refclk regmap\n");
+		return PTR_ERR(syscon);
+	}
+
+	data->syscon = syscon;
+
+	ret = of_parse_phandle_with_fixed_args(node, "ti,syscon-phy-pll-refclk", 1,
+					       0, &args);
+	if (ret)
+		return ret;
+
+	data->offset = args.args[0];
+
+	ret = regmap_update_bits(data->syscon, data->offset, PHY_PLL_REFCLK_MASK, data->rate_code);
+	if (ret) {
+		dev_err(dev, "failed to set phy pll reference clock rate\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dwc3_ti_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = pdev->dev.of_node;
+	struct dwc3_data *data;
+	int i, ret;
+	unsigned long rate;
+	u32 reg;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->dev = dev;
+	platform_set_drvdata(pdev, data);
+
+	data->usbss = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(data->usbss)) {
+		dev_err(dev, "can't map IOMEM resource\n");
+		return PTR_ERR(data->usbss);
+	}
+
+	data->usb2_refclk = devm_clk_get(dev, "ref");
+	if (IS_ERR(data->usb2_refclk)) {
+		dev_err(dev, "can't get usb2_refclk\n");
+		return PTR_ERR(data->usb2_refclk);
+	}
+
+	/* Calculate the rate code */
+	rate = clk_get_rate(data->usb2_refclk);
+	rate /= 1000;	// To KHz
+	for (i = 0; i < ARRAY_SIZE(dwc3_ti_rate_table); i++) {
+		if (dwc3_ti_rate_table[i] == rate)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(dwc3_ti_rate_table)) {
+		dev_err(dev, "unsupported usb2_refclk rate: %lu KHz\n", rate);
+		return -EINVAL;
+	}
+
+	data->rate_code = i;
+
+	/* Read the syscon property and set the rate code */
+	ret = phy_syscon_pll_refclk(data);
+	if (ret)
+		return ret;
+
+	/* VBUS divider select */
+	data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
+	reg = dwc3_ti_readl(data, USBSS_PHY_CONFIG);
+	if (data->vbus_divider)
+		reg |= 1 << USBSS_PHY_VBUS_SEL_SHIFT;
+
+	dwc3_ti_writel(data, USBSS_PHY_CONFIG, reg);
+
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	/*
+	 * Don't ignore its dependencies with its children
+	 */
+	pm_suspend_ignore_children(dev, false);
+	clk_prepare_enable(data->usb2_refclk);
+	pm_runtime_get_noresume(dev);
+
+	ret = of_platform_populate(node, NULL, NULL, dev);
+	if (ret) {
+		dev_err(dev, "failed to create dwc3 core: %d\n", ret);
+		goto err_pm_disable;
+	}
+
+	/* Set mode valid bit to indicate role is valid */
+	reg = dwc3_ti_readl(data, USBSS_MODE_CONTROL);
+	reg |= USBSS_MODE_VALID;
+	dwc3_ti_writel(data, USBSS_MODE_CONTROL, reg);
+
+	/* Setting up autosuspend */
+	pm_runtime_set_autosuspend_delay(dev, DWC3_AM62_AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+	return 0;
+
+err_pm_disable:
+	clk_disable_unprepare(data->usb2_refclk);
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	return ret;
+}
+
+static int dwc3_ti_remove_core(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+	return 0;
+}
+
+static int dwc3_ti_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct dwc3_data *data = platform_get_drvdata(pdev);
+	u32 reg;
+
+	device_for_each_child(dev, NULL, dwc3_ti_remove_core);
+
+	/* Clear mode valid bit */
+	reg = dwc3_ti_readl(data, USBSS_MODE_CONTROL);
+	reg &= ~USBSS_MODE_VALID;
+	dwc3_ti_writel(data, USBSS_MODE_CONTROL, reg);
+
+	pm_runtime_put_sync(dev);
+	clk_disable_unprepare(data->usb2_refclk);
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int dwc3_ti_suspend_common(struct device *dev)
+{
+	struct dwc3_data *data = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(data->usb2_refclk);
+
+	return 0;
+}
+
+static int dwc3_ti_resume_common(struct device *dev)
+{
+	struct dwc3_data *data = dev_get_drvdata(dev);
+
+	clk_prepare_enable(data->usb2_refclk);
+
+	return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(dwc3_ti_pm_ops, dwc3_ti_suspend_common,
+			    dwc3_ti_resume_common, NULL);
+
+#define DEV_PM_OPS	(&dwc3_ti_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif /* CONFIG_PM */
+
+static const struct of_device_id dwc3_ti_of_match[] = {
+	{ .compatible = "ti,am62-usb"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, dwc3_ti_of_match);
+
+static struct platform_driver dwc3_ti_driver = {
+	.probe		= dwc3_ti_probe,
+	.remove		= dwc3_ti_remove,
+	.driver		= {
+		.name	= "dwc3-am62",
+		.pm	= DEV_PM_OPS,
+		.of_match_table = dwc3_ti_of_match,
+	},
+};
+
+module_platform_driver(dwc3_ti_driver);
+
+MODULE_ALIAS("platform:dwc3-am62");
+MODULE_AUTHOR("Aswath Govindraju <a-govindraju@ti.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DesignWare USB3 TI Glue Layer");
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
new file mode 100644
index 000000000..4be6a873b
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dwc3-exynos.c - Samsung Exynos DWC3 Specific Glue layer
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Anton Tikhomirov <av.tikhomirov@samsung.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/regulator/consumer.h>
+
+#define DWC3_EXYNOS_MAX_CLOCKS	4
+
+struct dwc3_exynos_driverdata {
+	const char		*clk_names[DWC3_EXYNOS_MAX_CLOCKS];
+	int			num_clks;
+	int			suspend_clk_idx;
+};
+
+struct dwc3_exynos {
+	struct device		*dev;
+
+	const char		**clk_names;
+	struct clk		*clks[DWC3_EXYNOS_MAX_CLOCKS];
+	int			num_clks;
+	int			suspend_clk_idx;
+
+	struct regulator	*vdd33;
+	struct regulator	*vdd10;
+};
+
+static int dwc3_exynos_probe(struct platform_device *pdev)
+{
+	struct dwc3_exynos	*exynos;
+	struct device		*dev = &pdev->dev;
+	struct device_node	*node = dev->of_node;
+	const struct dwc3_exynos_driverdata *driver_data;
+	int			i, ret;
+
+	exynos = devm_kzalloc(dev, sizeof(*exynos), GFP_KERNEL);
+	if (!exynos)
+		return -ENOMEM;
+
+	driver_data = of_device_get_match_data(dev);
+	exynos->dev = dev;
+	exynos->num_clks = driver_data->num_clks;
+	exynos->clk_names = (const char **)driver_data->clk_names;
+	exynos->suspend_clk_idx = driver_data->suspend_clk_idx;
+
+	platform_set_drvdata(pdev, exynos);
+
+	for (i = 0; i < exynos->num_clks; i++) {
+		exynos->clks[i] = devm_clk_get(dev, exynos->clk_names[i]);
+		if (IS_ERR(exynos->clks[i])) {
+			dev_err(dev, "failed to get clock: %s\n",
+				exynos->clk_names[i]);
+			return PTR_ERR(exynos->clks[i]);
+		}
+	}
+
+	for (i = 0; i < exynos->num_clks; i++) {
+		ret = clk_prepare_enable(exynos->clks[i]);
+		if (ret) {
+			while (i-- > 0)
+				clk_disable_unprepare(exynos->clks[i]);
+			return ret;
+		}
+	}
+
+	if (exynos->suspend_clk_idx >= 0)
+		clk_prepare_enable(exynos->clks[exynos->suspend_clk_idx]);
+
+	exynos->vdd33 = devm_regulator_get(dev, "vdd33");
+	if (IS_ERR(exynos->vdd33)) {
+		ret = PTR_ERR(exynos->vdd33);
+		goto vdd33_err;
+	}
+	ret = regulator_enable(exynos->vdd33);
+	if (ret) {
+		dev_err(dev, "Failed to enable VDD33 supply\n");
+		goto vdd33_err;
+	}
+
+	exynos->vdd10 = devm_regulator_get(dev, "vdd10");
+	if (IS_ERR(exynos->vdd10)) {
+		ret = PTR_ERR(exynos->vdd10);
+		goto vdd10_err;
+	}
+	ret = regulator_enable(exynos->vdd10);
+	if (ret) {
+		dev_err(dev, "Failed to enable VDD10 supply\n");
+		goto vdd10_err;
+	}
+
+	if (node) {
+		ret = of_platform_populate(node, NULL, NULL, dev);
+		if (ret) {
+			dev_err(dev, "failed to add dwc3 core\n");
+			goto populate_err;
+		}
+	} else {
+		dev_err(dev, "no device node, failed to add dwc3 core\n");
+		ret = -ENODEV;
+		goto populate_err;
+	}
+
+	return 0;
+
+populate_err:
+	regulator_disable(exynos->vdd10);
+vdd10_err:
+	regulator_disable(exynos->vdd33);
+vdd33_err:
+	for (i = exynos->num_clks - 1; i >= 0; i--)
+		clk_disable_unprepare(exynos->clks[i]);
+
+	if (exynos->suspend_clk_idx >= 0)
+		clk_disable_unprepare(exynos->clks[exynos->suspend_clk_idx]);
+
+	return ret;
+}
+
+static int dwc3_exynos_remove(struct platform_device *pdev)
+{
+	struct dwc3_exynos	*exynos = platform_get_drvdata(pdev);
+	int i;
+
+	of_platform_depopulate(&pdev->dev);
+
+	for (i = exynos->num_clks - 1; i >= 0; i--)
+		clk_disable_unprepare(exynos->clks[i]);
+
+	if (exynos->suspend_clk_idx >= 0)
+		clk_disable_unprepare(exynos->clks[exynos->suspend_clk_idx]);
+
+	regulator_disable(exynos->vdd33);
+	regulator_disable(exynos->vdd10);
+
+	return 0;
+}
+
+static const struct dwc3_exynos_driverdata exynos5250_drvdata = {
+	.clk_names = { "usbdrd30" },
+	.num_clks = 1,
+	.suspend_clk_idx = -1,
+};
+
+static const struct dwc3_exynos_driverdata exynos5433_drvdata = {
+	.clk_names = { "aclk", "susp_clk", "pipe_pclk", "phyclk" },
+	.num_clks = 4,
+	.suspend_clk_idx = 1,
+};
+
+static const struct dwc3_exynos_driverdata exynos7_drvdata = {
+	.clk_names = { "usbdrd30", "usbdrd30_susp_clk", "usbdrd30_axius_clk" },
+	.num_clks = 3,
+	.suspend_clk_idx = 1,
+};
+
+static const struct of_device_id exynos_dwc3_match[] = {
+	{
+		.compatible = "samsung,exynos5250-dwusb3",
+		.data = &exynos5250_drvdata,
+	}, {
+		.compatible = "samsung,exynos5433-dwusb3",
+		.data = &exynos5433_drvdata,
+	}, {
+		.compatible = "samsung,exynos7-dwusb3",
+		.data = &exynos7_drvdata,
+	}, {
+	}
+};
+MODULE_DEVICE_TABLE(of, exynos_dwc3_match);
+
+#ifdef CONFIG_PM_SLEEP
+static int dwc3_exynos_suspend(struct device *dev)
+{
+	struct dwc3_exynos *exynos = dev_get_drvdata(dev);
+	int i;
+
+	for (i = exynos->num_clks - 1; i >= 0; i--)
+		clk_disable_unprepare(exynos->clks[i]);
+
+	regulator_disable(exynos->vdd33);
+	regulator_disable(exynos->vdd10);
+
+	return 0;
+}
+
+static int dwc3_exynos_resume(struct device *dev)
+{
+	struct dwc3_exynos *exynos = dev_get_drvdata(dev);
+	int i, ret;
+
+	ret = regulator_enable(exynos->vdd33);
+	if (ret) {
+		dev_err(dev, "Failed to enable VDD33 supply\n");
+		return ret;
+	}
+	ret = regulator_enable(exynos->vdd10);
+	if (ret) {
+		dev_err(dev, "Failed to enable VDD10 supply\n");
+		return ret;
+	}
+
+	for (i = 0; i < exynos->num_clks; i++) {
+		ret = clk_prepare_enable(exynos->clks[i]);
+		if (ret) {
+			while (i-- > 0)
+				clk_disable_unprepare(exynos->clks[i]);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops dwc3_exynos_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwc3_exynos_suspend, dwc3_exynos_resume)
+};
+
+#define DEV_PM_OPS	(&dwc3_exynos_dev_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif /* CONFIG_PM_SLEEP */
+
+static struct platform_driver dwc3_exynos_driver = {
+	.probe		= dwc3_exynos_probe,
+	.remove		= dwc3_exynos_remove,
+	.driver		= {
+		.name	= "exynos-dwc3",
+		.of_match_table = exynos_dwc3_match,
+		.pm	= DEV_PM_OPS,
+	},
+};
+
+module_platform_driver(dwc3_exynos_driver);
+
+MODULE_AUTHOR("Anton Tikhomirov <av.tikhomirov@samsung.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare USB3 Exynos Glue Layer");
diff --git a/drivers/usb/dwc3/dwc3-haps.c b/drivers/usb/dwc3/dwc3-haps.c
new file mode 100644
index 000000000..f6e3817fa
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-haps.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dwc3-haps.c - Synopsys HAPS PCI Specific glue layer
+ *
+ * Copyright (C) 2018 Synopsys, Inc.
+ *
+ * Authors: Thinh Nguyen <thinhn@synopsys.com>,
+ *          John Youn <johnyoun@synopsys.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+/**
+ * struct dwc3_haps - Driver private structure
+ * @dwc3: child dwc3 platform_device
+ * @pci: our link to PCI bus
+ */
+struct dwc3_haps {
+	struct platform_device *dwc3;
+	struct pci_dev *pci;
+};
+
+static const struct property_entry initial_properties[] = {
+	PROPERTY_ENTRY_BOOL("snps,usb3_lpm_capable"),
+	PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
+	PROPERTY_ENTRY_BOOL("snps,dis_enblslpm_quirk"),
+	PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
+	{ },
+};
+
+static const struct software_node dwc3_haps_swnode = {
+	.properties = initial_properties,
+};
+
+static int dwc3_haps_probe(struct pci_dev *pci,
+			   const struct pci_device_id *id)
+{
+	struct dwc3_haps	*dwc;
+	struct device		*dev = &pci->dev;
+	struct resource		res[2];
+	int			ret;
+
+	ret = pcim_enable_device(pci);
+	if (ret) {
+		dev_err(dev, "failed to enable pci device\n");
+		return -ENODEV;
+	}
+
+	pci_set_master(pci);
+
+	dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL);
+	if (!dwc)
+		return -ENOMEM;
+
+	dwc->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
+	if (!dwc->dwc3)
+		return -ENOMEM;
+
+	memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
+
+	res[0].start	= pci_resource_start(pci, 0);
+	res[0].end	= pci_resource_end(pci, 0);
+	res[0].name	= "dwc_usb3";
+	res[0].flags	= IORESOURCE_MEM;
+
+	res[1].start	= pci->irq;
+	res[1].name	= "dwc_usb3";
+	res[1].flags	= IORESOURCE_IRQ;
+
+	ret = platform_device_add_resources(dwc->dwc3, res, ARRAY_SIZE(res));
+	if (ret) {
+		dev_err(dev, "couldn't add resources to dwc3 device\n");
+		goto err;
+	}
+
+	dwc->pci = pci;
+	dwc->dwc3->dev.parent = dev;
+
+	ret = device_add_software_node(&dwc->dwc3->dev, &dwc3_haps_swnode);
+	if (ret)
+		goto err;
+
+	ret = platform_device_add(dwc->dwc3);
+	if (ret) {
+		dev_err(dev, "failed to register dwc3 device\n");
+		goto err;
+	}
+
+	pci_set_drvdata(pci, dwc);
+
+	return 0;
+err:
+	device_remove_software_node(&dwc->dwc3->dev);
+	platform_device_put(dwc->dwc3);
+	return ret;
+}
+
+static void dwc3_haps_remove(struct pci_dev *pci)
+{
+	struct dwc3_haps *dwc = pci_get_drvdata(pci);
+
+	device_remove_software_node(&dwc->dwc3->dev);
+	platform_device_unregister(dwc->dwc3);
+}
+
+static const struct pci_device_id dwc3_haps_id_table[] = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
+			   PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
+		/*
+		 * i.MX6QP and i.MX7D platform use a PCIe controller with the
+		 * same VID and PID as this USB controller. The system may
+		 * incorrectly match this driver to that PCIe controller. To
+		 * workaround this, specifically use class type USB to prevent
+		 * incorrect driver matching.
+		 */
+		.class = (PCI_CLASS_SERIAL_USB << 8),
+		.class_mask = 0xffff00,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
+			   PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI),
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
+			   PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31),
+	},
+	{  }	/* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(pci, dwc3_haps_id_table);
+
+static struct pci_driver dwc3_haps_driver = {
+	.name		= "dwc3-haps",
+	.id_table	= dwc3_haps_id_table,
+	.probe		= dwc3_haps_probe,
+	.remove		= dwc3_haps_remove,
+};
+
+MODULE_AUTHOR("Thinh Nguyen <thinhn@synopsys.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Synopsys HAPS PCI Glue Layer");
+
+module_pci_driver(dwc3_haps_driver);
diff --git a/drivers/usb/dwc3/dwc3-imx8mp.c b/drivers/usb/dwc3/dwc3-imx8mp.c
new file mode 100644
index 000000000..174f07614
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-imx8mp.c
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dwc3-imx8mp.c - NXP imx8mp Specific Glue layer
+ *
+ * Copyright (c) 2020 NXP.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include "core.h"
+
+/* USB wakeup registers */
+#define USB_WAKEUP_CTRL			0x00
+
+/* Global wakeup interrupt enable, also used to clear interrupt */
+#define USB_WAKEUP_EN			BIT(31)
+/* Wakeup from connect or disconnect, only for superspeed */
+#define USB_WAKEUP_SS_CONN		BIT(5)
+/* 0 select vbus_valid, 1 select sessvld */
+#define USB_WAKEUP_VBUS_SRC_SESS_VAL	BIT(4)
+/* Enable signal for wake up from u3 state */
+#define USB_WAKEUP_U3_EN		BIT(3)
+/* Enable signal for wake up from id change */
+#define USB_WAKEUP_ID_EN		BIT(2)
+/* Enable signal for wake up from vbus change */
+#define	USB_WAKEUP_VBUS_EN		BIT(1)
+/* Enable signal for wake up from dp/dm change */
+#define USB_WAKEUP_DPDM_EN		BIT(0)
+
+#define USB_WAKEUP_EN_MASK		GENMASK(5, 0)
+
+/* USB glue registers */
+#define USB_CTRL0		0x00
+#define USB_CTRL1		0x04
+
+#define USB_CTRL0_PORTPWR_EN	BIT(12) /* 1 - PPC enabled (default) */
+#define USB_CTRL0_USB3_FIXED	BIT(22) /* 1 - USB3 permanent attached */
+#define USB_CTRL0_USB2_FIXED	BIT(23) /* 1 - USB2 permanent attached */
+
+#define USB_CTRL1_OC_POLARITY	BIT(16) /* 0 - HIGH / 1 - LOW */
+#define USB_CTRL1_PWR_POLARITY	BIT(17) /* 0 - HIGH / 1 - LOW */
+
+struct dwc3_imx8mp {
+	struct device			*dev;
+	struct platform_device		*dwc3;
+	void __iomem			*hsio_blk_base;
+	void __iomem			*glue_base;
+	struct clk			*hsio_clk;
+	struct clk			*suspend_clk;
+	int				irq;
+	bool				pm_suspended;
+	bool				wakeup_pending;
+};
+
+static void imx8mp_configure_glue(struct dwc3_imx8mp *dwc3_imx)
+{
+	struct device *dev = dwc3_imx->dev;
+	u32 value;
+
+	if (!dwc3_imx->glue_base)
+		return;
+
+	value = readl(dwc3_imx->glue_base + USB_CTRL0);
+
+	if (device_property_read_bool(dev, "fsl,permanently-attached"))
+		value |= (USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED);
+	else
+		value &= ~(USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED);
+
+	if (device_property_read_bool(dev, "fsl,disable-port-power-control"))
+		value &= ~(USB_CTRL0_PORTPWR_EN);
+	else
+		value |= USB_CTRL0_PORTPWR_EN;
+
+	writel(value, dwc3_imx->glue_base + USB_CTRL0);
+
+	value = readl(dwc3_imx->glue_base + USB_CTRL1);
+	if (device_property_read_bool(dev, "fsl,over-current-active-low"))
+		value |= USB_CTRL1_OC_POLARITY;
+	else
+		value &= ~USB_CTRL1_OC_POLARITY;
+
+	if (device_property_read_bool(dev, "fsl,power-active-low"))
+		value |= USB_CTRL1_PWR_POLARITY;
+	else
+		value &= ~USB_CTRL1_PWR_POLARITY;
+
+	writel(value, dwc3_imx->glue_base + USB_CTRL1);
+}
+
+static void dwc3_imx8mp_wakeup_enable(struct dwc3_imx8mp *dwc3_imx)
+{
+	struct dwc3	*dwc3 = platform_get_drvdata(dwc3_imx->dwc3);
+	u32		val;
+
+	if (!dwc3)
+		return;
+
+	val = readl(dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL);
+
+	if ((dwc3->current_dr_role == DWC3_GCTL_PRTCAP_HOST) && dwc3->xhci)
+		val |= USB_WAKEUP_EN | USB_WAKEUP_SS_CONN |
+		       USB_WAKEUP_U3_EN | USB_WAKEUP_DPDM_EN;
+	else if (dwc3->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE)
+		val |= USB_WAKEUP_EN | USB_WAKEUP_VBUS_EN |
+		       USB_WAKEUP_VBUS_SRC_SESS_VAL;
+
+	writel(val, dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL);
+}
+
+static void dwc3_imx8mp_wakeup_disable(struct dwc3_imx8mp *dwc3_imx)
+{
+	u32 val;
+
+	val = readl(dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL);
+	val &= ~(USB_WAKEUP_EN | USB_WAKEUP_EN_MASK);
+	writel(val, dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL);
+}
+
+static irqreturn_t dwc3_imx8mp_interrupt(int irq, void *_dwc3_imx)
+{
+	struct dwc3_imx8mp	*dwc3_imx = _dwc3_imx;
+	struct dwc3		*dwc = platform_get_drvdata(dwc3_imx->dwc3);
+
+	if (!dwc3_imx->pm_suspended)
+		return IRQ_HANDLED;
+
+	disable_irq_nosync(dwc3_imx->irq);
+	dwc3_imx->wakeup_pending = true;
+
+	if ((dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) && dwc->xhci)
+		pm_runtime_resume(&dwc->xhci->dev);
+	else if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE)
+		pm_runtime_get(dwc->dev);
+
+	return IRQ_HANDLED;
+}
+
+static int dwc3_imx8mp_probe(struct platform_device *pdev)
+{
+	struct device		*dev = &pdev->dev;
+	struct device_node	*dwc3_np, *node = dev->of_node;
+	struct dwc3_imx8mp	*dwc3_imx;
+	struct resource		*res;
+	int			err, irq;
+
+	if (!node) {
+		dev_err(dev, "device node not found\n");
+		return -EINVAL;
+	}
+
+	dwc3_imx = devm_kzalloc(dev, sizeof(*dwc3_imx), GFP_KERNEL);
+	if (!dwc3_imx)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, dwc3_imx);
+
+	dwc3_imx->dev = dev;
+
+	dwc3_imx->hsio_blk_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(dwc3_imx->hsio_blk_base))
+		return PTR_ERR(dwc3_imx->hsio_blk_base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_warn(dev, "Base address for glue layer missing. Continuing without, some features are missing though.");
+	} else {
+		dwc3_imx->glue_base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(dwc3_imx->glue_base))
+			return PTR_ERR(dwc3_imx->glue_base);
+	}
+
+	dwc3_imx->hsio_clk = devm_clk_get(dev, "hsio");
+	if (IS_ERR(dwc3_imx->hsio_clk)) {
+		err = PTR_ERR(dwc3_imx->hsio_clk);
+		dev_err(dev, "Failed to get hsio clk, err=%d\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(dwc3_imx->hsio_clk);
+	if (err) {
+		dev_err(dev, "Failed to enable hsio clk, err=%d\n", err);
+		return err;
+	}
+
+	dwc3_imx->suspend_clk = devm_clk_get(dev, "suspend");
+	if (IS_ERR(dwc3_imx->suspend_clk)) {
+		err = PTR_ERR(dwc3_imx->suspend_clk);
+		dev_err(dev, "Failed to get suspend clk, err=%d\n", err);
+		goto disable_hsio_clk;
+	}
+
+	err = clk_prepare_enable(dwc3_imx->suspend_clk);
+	if (err) {
+		dev_err(dev, "Failed to enable suspend clk, err=%d\n", err);
+		goto disable_hsio_clk;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		err = irq;
+		goto disable_clks;
+	}
+	dwc3_imx->irq = irq;
+
+	imx8mp_configure_glue(dwc3_imx);
+
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	err = pm_runtime_get_sync(dev);
+	if (err < 0)
+		goto disable_rpm;
+
+	dwc3_np = of_get_compatible_child(node, "snps,dwc3");
+	if (!dwc3_np) {
+		err = -ENODEV;
+		dev_err(dev, "failed to find dwc3 core child\n");
+		goto disable_rpm;
+	}
+
+	err = of_platform_populate(node, NULL, NULL, dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to create dwc3 core\n");
+		goto err_node_put;
+	}
+
+	dwc3_imx->dwc3 = of_find_device_by_node(dwc3_np);
+	if (!dwc3_imx->dwc3) {
+		dev_err(dev, "failed to get dwc3 platform device\n");
+		err = -ENODEV;
+		goto depopulate;
+	}
+	of_node_put(dwc3_np);
+
+	err = devm_request_threaded_irq(dev, irq, NULL, dwc3_imx8mp_interrupt,
+					IRQF_ONESHOT, dev_name(dev), dwc3_imx);
+	if (err) {
+		dev_err(dev, "failed to request IRQ #%d --> %d\n", irq, err);
+		goto depopulate;
+	}
+
+	device_set_wakeup_capable(dev, true);
+	pm_runtime_put(dev);
+
+	return 0;
+
+depopulate:
+	of_platform_depopulate(dev);
+err_node_put:
+	of_node_put(dwc3_np);
+disable_rpm:
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
+disable_clks:
+	clk_disable_unprepare(dwc3_imx->suspend_clk);
+disable_hsio_clk:
+	clk_disable_unprepare(dwc3_imx->hsio_clk);
+
+	return err;
+}
+
+static int dwc3_imx8mp_remove(struct platform_device *pdev)
+{
+	struct dwc3_imx8mp *dwc3_imx = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+
+	pm_runtime_get_sync(dev);
+	of_platform_depopulate(dev);
+
+	clk_disable_unprepare(dwc3_imx->suspend_clk);
+	clk_disable_unprepare(dwc3_imx->hsio_clk);
+
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_imx8mp_suspend(struct dwc3_imx8mp *dwc3_imx,
+					      pm_message_t msg)
+{
+	if (dwc3_imx->pm_suspended)
+		return 0;
+
+	/* Wakeup enable */
+	if (PMSG_IS_AUTO(msg) || device_may_wakeup(dwc3_imx->dev))
+		dwc3_imx8mp_wakeup_enable(dwc3_imx);
+
+	dwc3_imx->pm_suspended = true;
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_imx8mp_resume(struct dwc3_imx8mp *dwc3_imx,
+					     pm_message_t msg)
+{
+	struct dwc3	*dwc = platform_get_drvdata(dwc3_imx->dwc3);
+	int ret = 0;
+
+	if (!dwc3_imx->pm_suspended)
+		return 0;
+
+	/* Wakeup disable */
+	dwc3_imx8mp_wakeup_disable(dwc3_imx);
+	dwc3_imx->pm_suspended = false;
+
+	/* Upon power loss any previous configuration is lost, restore it */
+	imx8mp_configure_glue(dwc3_imx);
+
+	if (dwc3_imx->wakeup_pending) {
+		dwc3_imx->wakeup_pending = false;
+		if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE) {
+			pm_runtime_mark_last_busy(dwc->dev);
+			pm_runtime_put_autosuspend(dwc->dev);
+		} else {
+			/*
+			 * Add wait for xhci switch from suspend
+			 * clock to normal clock to detect connection.
+			 */
+			usleep_range(9000, 10000);
+		}
+		enable_irq(dwc3_imx->irq);
+	}
+
+	return ret;
+}
+
+static int __maybe_unused dwc3_imx8mp_pm_suspend(struct device *dev)
+{
+	struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
+	int ret;
+
+	ret = dwc3_imx8mp_suspend(dwc3_imx, PMSG_SUSPEND);
+
+	if (device_may_wakeup(dwc3_imx->dev))
+		enable_irq_wake(dwc3_imx->irq);
+	else
+		clk_disable_unprepare(dwc3_imx->suspend_clk);
+
+	clk_disable_unprepare(dwc3_imx->hsio_clk);
+	dev_dbg(dev, "dwc3 imx8mp pm suspend.\n");
+
+	return ret;
+}
+
+static int __maybe_unused dwc3_imx8mp_pm_resume(struct device *dev)
+{
+	struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
+	int ret;
+
+	if (device_may_wakeup(dwc3_imx->dev)) {
+		disable_irq_wake(dwc3_imx->irq);
+	} else {
+		ret = clk_prepare_enable(dwc3_imx->suspend_clk);
+		if (ret)
+			return ret;
+	}
+
+	ret = clk_prepare_enable(dwc3_imx->hsio_clk);
+	if (ret)
+		return ret;
+
+	ret = dwc3_imx8mp_resume(dwc3_imx, PMSG_RESUME);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	dev_dbg(dev, "dwc3 imx8mp pm resume.\n");
+
+	return ret;
+}
+
+static int __maybe_unused dwc3_imx8mp_runtime_suspend(struct device *dev)
+{
+	struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "dwc3 imx8mp runtime suspend.\n");
+
+	return dwc3_imx8mp_suspend(dwc3_imx, PMSG_AUTO_SUSPEND);
+}
+
+static int __maybe_unused dwc3_imx8mp_runtime_resume(struct device *dev)
+{
+	struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "dwc3 imx8mp runtime resume.\n");
+
+	return dwc3_imx8mp_resume(dwc3_imx, PMSG_AUTO_RESUME);
+}
+
+static const struct dev_pm_ops dwc3_imx8mp_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwc3_imx8mp_pm_suspend, dwc3_imx8mp_pm_resume)
+	SET_RUNTIME_PM_OPS(dwc3_imx8mp_runtime_suspend,
+			   dwc3_imx8mp_runtime_resume, NULL)
+};
+
+static const struct of_device_id dwc3_imx8mp_of_match[] = {
+	{ .compatible = "fsl,imx8mp-dwc3", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, dwc3_imx8mp_of_match);
+
+static struct platform_driver dwc3_imx8mp_driver = {
+	.probe		= dwc3_imx8mp_probe,
+	.remove		= dwc3_imx8mp_remove,
+	.driver		= {
+		.name	= "imx8mp-dwc3",
+		.pm	= &dwc3_imx8mp_dev_pm_ops,
+		.of_match_table	= dwc3_imx8mp_of_match,
+	},
+};
+
+module_platform_driver(dwc3_imx8mp_driver);
+
+MODULE_ALIAS("platform:imx8mp-dwc3");
+MODULE_AUTHOR("jun.li@nxp.com");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare USB3 imx8mp Glue Layer");
diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c
new file mode 100644
index 000000000..131795929
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-keystone.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dwc3-keystone.c - Keystone Specific Glue layer
+ *
+ * Copyright (C) 2010-2013 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Author: WingMan Kwok <w-kwok2@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
+
+/* USBSS register offsets */
+#define USBSS_REVISION		0x0000
+#define USBSS_SYSCONFIG		0x0010
+#define USBSS_IRQ_EOI		0x0018
+#define USBSS_IRQSTATUS_RAW_0	0x0020
+#define USBSS_IRQSTATUS_0	0x0024
+#define USBSS_IRQENABLE_SET_0	0x0028
+#define USBSS_IRQENABLE_CLR_0	0x002c
+
+/* IRQ register bits */
+#define USBSS_IRQ_EOI_LINE(n)	BIT(n)
+#define USBSS_IRQ_EVENT_ST	BIT(0)
+#define USBSS_IRQ_COREIRQ_EN	BIT(0)
+#define USBSS_IRQ_COREIRQ_CLR	BIT(0)
+
+struct dwc3_keystone {
+	struct device			*dev;
+	void __iomem			*usbss;
+	struct phy			*usb3_phy;
+};
+
+static inline u32 kdwc3_readl(void __iomem *base, u32 offset)
+{
+	return readl(base + offset);
+}
+
+static inline void kdwc3_writel(void __iomem *base, u32 offset, u32 value)
+{
+	writel(value, base + offset);
+}
+
+static void kdwc3_enable_irqs(struct dwc3_keystone *kdwc)
+{
+	u32 val;
+
+	val = kdwc3_readl(kdwc->usbss, USBSS_IRQENABLE_SET_0);
+	val |= USBSS_IRQ_COREIRQ_EN;
+	kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_SET_0, val);
+}
+
+static void kdwc3_disable_irqs(struct dwc3_keystone *kdwc)
+{
+	u32 val;
+
+	val = kdwc3_readl(kdwc->usbss, USBSS_IRQENABLE_SET_0);
+	val &= ~USBSS_IRQ_COREIRQ_EN;
+	kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_SET_0, val);
+}
+
+static irqreturn_t dwc3_keystone_interrupt(int irq, void *_kdwc)
+{
+	struct dwc3_keystone	*kdwc = _kdwc;
+
+	kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_CLR_0, USBSS_IRQ_COREIRQ_CLR);
+	kdwc3_writel(kdwc->usbss, USBSS_IRQSTATUS_0, USBSS_IRQ_EVENT_ST);
+	kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_SET_0, USBSS_IRQ_COREIRQ_EN);
+	kdwc3_writel(kdwc->usbss, USBSS_IRQ_EOI, USBSS_IRQ_EOI_LINE(0));
+
+	return IRQ_HANDLED;
+}
+
+static int kdwc3_probe(struct platform_device *pdev)
+{
+	struct device		*dev = &pdev->dev;
+	struct device_node	*node = pdev->dev.of_node;
+	struct dwc3_keystone	*kdwc;
+	int			error, irq;
+
+	kdwc = devm_kzalloc(dev, sizeof(*kdwc), GFP_KERNEL);
+	if (!kdwc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, kdwc);
+
+	kdwc->dev = dev;
+
+	kdwc->usbss = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(kdwc->usbss))
+		return PTR_ERR(kdwc->usbss);
+
+	/* PSC dependency on AM65 needs SERDES0 to be powered before USB0 */
+	kdwc->usb3_phy = devm_phy_optional_get(dev, "usb3-phy");
+	if (IS_ERR(kdwc->usb3_phy))
+		return dev_err_probe(dev, PTR_ERR(kdwc->usb3_phy), "couldn't get usb3 phy\n");
+
+	phy_pm_runtime_get_sync(kdwc->usb3_phy);
+
+	error = phy_reset(kdwc->usb3_phy);
+	if (error < 0) {
+		dev_err(dev, "usb3 phy reset failed: %d\n", error);
+		return error;
+	}
+
+	error = phy_init(kdwc->usb3_phy);
+	if (error < 0) {
+		dev_err(dev, "usb3 phy init failed: %d\n", error);
+		return error;
+	}
+
+	error = phy_power_on(kdwc->usb3_phy);
+	if (error < 0) {
+		dev_err(dev, "usb3 phy power on failed: %d\n", error);
+		phy_exit(kdwc->usb3_phy);
+		return error;
+	}
+
+	pm_runtime_enable(kdwc->dev);
+	error = pm_runtime_get_sync(kdwc->dev);
+	if (error < 0) {
+		dev_err(kdwc->dev, "pm_runtime_get_sync failed, error %d\n",
+			error);
+		goto err_irq;
+	}
+
+	/* IRQ processing not required currently for AM65 */
+	if (of_device_is_compatible(node, "ti,am654-dwc3"))
+		goto skip_irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		error = irq;
+		goto err_irq;
+	}
+
+	error = devm_request_irq(dev, irq, dwc3_keystone_interrupt, IRQF_SHARED,
+			dev_name(dev), kdwc);
+	if (error) {
+		dev_err(dev, "failed to request IRQ #%d --> %d\n",
+				irq, error);
+		goto err_irq;
+	}
+
+	kdwc3_enable_irqs(kdwc);
+
+skip_irq:
+	error = of_platform_populate(node, NULL, NULL, dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to create dwc3 core\n");
+		goto err_core;
+	}
+
+	return 0;
+
+err_core:
+	kdwc3_disable_irqs(kdwc);
+err_irq:
+	pm_runtime_put_sync(kdwc->dev);
+	pm_runtime_disable(kdwc->dev);
+	phy_power_off(kdwc->usb3_phy);
+	phy_exit(kdwc->usb3_phy);
+	phy_pm_runtime_put_sync(kdwc->usb3_phy);
+
+	return error;
+}
+
+static int kdwc3_remove_core(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
+static int kdwc3_remove(struct platform_device *pdev)
+{
+	struct dwc3_keystone *kdwc = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+
+	if (!of_device_is_compatible(node, "ti,am654-dwc3"))
+		kdwc3_disable_irqs(kdwc);
+
+	device_for_each_child(&pdev->dev, NULL, kdwc3_remove_core);
+	pm_runtime_put_sync(kdwc->dev);
+	pm_runtime_disable(kdwc->dev);
+
+	phy_power_off(kdwc->usb3_phy);
+	phy_exit(kdwc->usb3_phy);
+	phy_pm_runtime_put_sync(kdwc->usb3_phy);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id kdwc3_of_match[] = {
+	{ .compatible = "ti,keystone-dwc3", },
+	{ .compatible = "ti,am654-dwc3" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, kdwc3_of_match);
+
+static struct platform_driver kdwc3_driver = {
+	.probe		= kdwc3_probe,
+	.remove		= kdwc3_remove,
+	.driver		= {
+		.name	= "keystone-dwc3",
+		.of_match_table	= kdwc3_of_match,
+	},
+};
+
+module_platform_driver(kdwc3_driver);
+
+MODULE_ALIAS("platform:keystone-dwc3");
+MODULE_AUTHOR("WingMan Kwok <w-kwok2@ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare USB3 KEYSTONE Glue Layer");
diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
new file mode 100644
index 000000000..10298b917
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -0,0 +1,994 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Glue for Amlogic G12A SoCs
+ *
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/*
+ * The USB is organized with a glue around the DWC3 Controller IP as :
+ * - Control registers for each USB2 Ports
+ * - Control registers for the USB PHY layer
+ * - SuperSpeed PHY can be enabled only if port is used
+ * - Dynamic OTG switching with ID change interrupt
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/reset.h>
+#include <linux/phy/phy.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/role.h>
+#include <linux/regulator/consumer.h>
+
+/* USB2 Ports Control Registers, offsets are per-port */
+
+#define U2P_REG_SIZE						0x20
+
+#define U2P_R0							0x0
+	#define U2P_R0_HOST_DEVICE				BIT(0)
+	#define U2P_R0_POWER_OK					BIT(1)
+	#define U2P_R0_HAST_MODE				BIT(2)
+	#define U2P_R0_POWER_ON_RESET				BIT(3)
+	#define U2P_R0_ID_PULLUP				BIT(4)
+	#define U2P_R0_DRV_VBUS					BIT(5)
+
+#define U2P_R1							0x4
+	#define U2P_R1_PHY_READY				BIT(0)
+	#define U2P_R1_ID_DIG					BIT(1)
+	#define U2P_R1_OTG_SESSION_VALID			BIT(2)
+	#define U2P_R1_VBUS_VALID				BIT(3)
+
+/* USB Glue Control Registers */
+
+#define G12A_GLUE_OFFSET					0x80
+
+#define USB_R0							0x00
+	#define USB_R0_P30_LANE0_TX2RX_LOOPBACK			BIT(17)
+	#define USB_R0_P30_LANE0_EXT_PCLK_REQ			BIT(18)
+	#define USB_R0_P30_PCS_RX_LOS_MASK_VAL_MASK		GENMASK(28, 19)
+	#define USB_R0_U2D_SS_SCALEDOWN_MODE_MASK		GENMASK(30, 29)
+	#define USB_R0_U2D_ACT					BIT(31)
+
+#define USB_R1							0x04
+	#define USB_R1_U3H_BIGENDIAN_GS				BIT(0)
+	#define USB_R1_U3H_PME_ENABLE				BIT(1)
+	#define USB_R1_U3H_HUB_PORT_OVERCURRENT_MASK		GENMASK(4, 2)
+	#define USB_R1_U3H_HUB_PORT_PERM_ATTACH_MASK		GENMASK(9, 7)
+	#define USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK		GENMASK(13, 12)
+	#define USB_R1_U3H_HOST_U3_PORT_DISABLE			BIT(16)
+	#define USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT	BIT(17)
+	#define USB_R1_U3H_HOST_MSI_ENABLE			BIT(18)
+	#define USB_R1_U3H_FLADJ_30MHZ_REG_MASK			GENMASK(24, 19)
+	#define USB_R1_P30_PCS_TX_SWING_FULL_MASK		GENMASK(31, 25)
+
+#define USB_R2							0x08
+	#define USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK		GENMASK(25, 20)
+	#define USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK		GENMASK(31, 26)
+
+#define USB_R3							0x0c
+	#define USB_R3_P30_SSC_ENABLE				BIT(0)
+	#define USB_R3_P30_SSC_RANGE_MASK			GENMASK(3, 1)
+	#define USB_R3_P30_SSC_REF_CLK_SEL_MASK			GENMASK(12, 4)
+	#define USB_R3_P30_REF_SSP_EN				BIT(13)
+
+#define USB_R4							0x10
+	#define USB_R4_P21_PORT_RESET_0				BIT(0)
+	#define USB_R4_P21_SLEEP_M0				BIT(1)
+	#define USB_R4_MEM_PD_MASK				GENMASK(3, 2)
+	#define USB_R4_P21_ONLY					BIT(4)
+
+#define USB_R5							0x14
+	#define USB_R5_ID_DIG_SYNC				BIT(0)
+	#define USB_R5_ID_DIG_REG				BIT(1)
+	#define USB_R5_ID_DIG_CFG_MASK				GENMASK(3, 2)
+	#define USB_R5_ID_DIG_EN_0				BIT(4)
+	#define USB_R5_ID_DIG_EN_1				BIT(5)
+	#define USB_R5_ID_DIG_CURR				BIT(6)
+	#define USB_R5_ID_DIG_IRQ				BIT(7)
+	#define USB_R5_ID_DIG_TH_MASK				GENMASK(15, 8)
+	#define USB_R5_ID_DIG_CNT_MASK				GENMASK(23, 16)
+
+#define PHY_COUNT						3
+#define USB2_OTG_PHY						1
+
+static struct clk_bulk_data meson_gxl_clocks[] = {
+	{ .id = "usb_ctrl" },
+	{ .id = "ddr" },
+};
+
+static struct clk_bulk_data meson_g12a_clocks[] = {
+	{ .id = NULL },
+};
+
+static struct clk_bulk_data meson_a1_clocks[] = {
+	{ .id = "usb_ctrl" },
+	{ .id = "usb_bus" },
+	{ .id = "xtal_usb_ctrl" },
+};
+
+static const char * const meson_gxm_phy_names[] = {
+	"usb2-phy0", "usb2-phy1", "usb2-phy2",
+};
+
+static const char * const meson_g12a_phy_names[] = {
+	"usb2-phy0", "usb2-phy1", "usb3-phy0",
+};
+
+/*
+ * Amlogic A1 has a single physical PHY, in slot 1, but still has the
+ * two U2 PHY controls register blocks like G12A.
+ * AXG has the similar scheme, thus needs the same tweak.
+ * Handling the first PHY on slot 1 would need a large amount of code
+ * changes, and the current management is generic enough to handle it
+ * correctly when only the "usb2-phy1" phy is specified on-par with the
+ * DT bindings.
+ */
+static const char * const meson_a1_phy_names[] = {
+	"usb2-phy0", "usb2-phy1"
+};
+
+struct dwc3_meson_g12a;
+
+struct dwc3_meson_g12a_drvdata {
+	bool otg_switch_supported;
+	bool otg_phy_host_port_disable;
+	struct clk_bulk_data *clks;
+	int num_clks;
+	const char * const *phy_names;
+	int num_phys;
+	int (*setup_regmaps)(struct dwc3_meson_g12a *priv, void __iomem *base);
+	int (*usb2_init_phy)(struct dwc3_meson_g12a *priv, int i,
+			     enum phy_mode mode);
+	int (*set_phy_mode)(struct dwc3_meson_g12a *priv, int i,
+			    enum phy_mode mode);
+	int (*usb_init)(struct dwc3_meson_g12a *priv);
+	int (*usb_post_init)(struct dwc3_meson_g12a *priv);
+};
+
+static int dwc3_meson_gxl_setup_regmaps(struct dwc3_meson_g12a *priv,
+					void __iomem *base);
+static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
+					 void __iomem *base);
+
+static int dwc3_meson_g12a_usb2_init_phy(struct dwc3_meson_g12a *priv, int i,
+					 enum phy_mode mode);
+static int dwc3_meson_gxl_usb2_init_phy(struct dwc3_meson_g12a *priv, int i,
+					enum phy_mode mode);
+
+static int dwc3_meson_g12a_set_phy_mode(struct dwc3_meson_g12a *priv,
+					int i, enum phy_mode mode);
+static int dwc3_meson_gxl_set_phy_mode(struct dwc3_meson_g12a *priv,
+				       int i, enum phy_mode mode);
+
+static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv);
+static int dwc3_meson_gxl_usb_init(struct dwc3_meson_g12a *priv);
+
+static int dwc3_meson_gxl_usb_post_init(struct dwc3_meson_g12a *priv);
+
+/*
+ * For GXL and GXM SoCs:
+ * USB Phy muxing between the DWC2 Device controller and the DWC3 Host
+ * controller is buggy when switching from Device to Host when USB port
+ * is unpopulated, it causes the DWC3 to hard crash.
+ * When populated (including OTG switching with ID pin), the switch works
+ * like a charm like on the G12A platforms.
+ * In order to still switch from Host to Device on an USB Type-A port,
+ * an U2_PORT_DISABLE bit has been added to disconnect the DWC3 Host
+ * controller from the port, but when used the DWC3 controller must be
+ * reset to recover usage of the port.
+ */
+
+static const struct dwc3_meson_g12a_drvdata gxl_drvdata = {
+	.otg_switch_supported = true,
+	.otg_phy_host_port_disable = true,
+	.clks = meson_gxl_clocks,
+	.num_clks = ARRAY_SIZE(meson_g12a_clocks),
+	.phy_names = meson_a1_phy_names,
+	.num_phys = ARRAY_SIZE(meson_a1_phy_names),
+	.setup_regmaps = dwc3_meson_gxl_setup_regmaps,
+	.usb2_init_phy = dwc3_meson_gxl_usb2_init_phy,
+	.set_phy_mode = dwc3_meson_gxl_set_phy_mode,
+	.usb_init = dwc3_meson_gxl_usb_init,
+	.usb_post_init = dwc3_meson_gxl_usb_post_init,
+};
+
+static const struct dwc3_meson_g12a_drvdata gxm_drvdata = {
+	.otg_switch_supported = true,
+	.otg_phy_host_port_disable = true,
+	.clks = meson_gxl_clocks,
+	.num_clks = ARRAY_SIZE(meson_g12a_clocks),
+	.phy_names = meson_gxm_phy_names,
+	.num_phys = ARRAY_SIZE(meson_gxm_phy_names),
+	.setup_regmaps = dwc3_meson_gxl_setup_regmaps,
+	.usb2_init_phy = dwc3_meson_gxl_usb2_init_phy,
+	.set_phy_mode = dwc3_meson_gxl_set_phy_mode,
+	.usb_init = dwc3_meson_gxl_usb_init,
+	.usb_post_init = dwc3_meson_gxl_usb_post_init,
+};
+
+static const struct dwc3_meson_g12a_drvdata axg_drvdata = {
+	.otg_switch_supported = true,
+	.clks = meson_gxl_clocks,
+	.num_clks = ARRAY_SIZE(meson_gxl_clocks),
+	.phy_names = meson_a1_phy_names,
+	.num_phys = ARRAY_SIZE(meson_a1_phy_names),
+	.setup_regmaps = dwc3_meson_gxl_setup_regmaps,
+	.usb2_init_phy = dwc3_meson_gxl_usb2_init_phy,
+	.set_phy_mode = dwc3_meson_gxl_set_phy_mode,
+	.usb_init = dwc3_meson_g12a_usb_init,
+	.usb_post_init = dwc3_meson_gxl_usb_post_init,
+};
+
+static const struct dwc3_meson_g12a_drvdata g12a_drvdata = {
+	.otg_switch_supported = true,
+	.clks = meson_g12a_clocks,
+	.num_clks = ARRAY_SIZE(meson_g12a_clocks),
+	.phy_names = meson_g12a_phy_names,
+	.num_phys = ARRAY_SIZE(meson_g12a_phy_names),
+	.setup_regmaps = dwc3_meson_g12a_setup_regmaps,
+	.usb2_init_phy = dwc3_meson_g12a_usb2_init_phy,
+	.set_phy_mode = dwc3_meson_g12a_set_phy_mode,
+	.usb_init = dwc3_meson_g12a_usb_init,
+};
+
+static const struct dwc3_meson_g12a_drvdata a1_drvdata = {
+	.otg_switch_supported = false,
+	.clks = meson_a1_clocks,
+	.num_clks = ARRAY_SIZE(meson_a1_clocks),
+	.phy_names = meson_a1_phy_names,
+	.num_phys = ARRAY_SIZE(meson_a1_phy_names),
+	.setup_regmaps = dwc3_meson_g12a_setup_regmaps,
+	.usb2_init_phy = dwc3_meson_g12a_usb2_init_phy,
+	.set_phy_mode = dwc3_meson_g12a_set_phy_mode,
+	.usb_init = dwc3_meson_g12a_usb_init,
+};
+
+struct dwc3_meson_g12a {
+	struct device		*dev;
+	struct regmap		*u2p_regmap[PHY_COUNT];
+	struct regmap		*usb_glue_regmap;
+	struct reset_control	*reset;
+	struct phy		*phys[PHY_COUNT];
+	enum usb_dr_mode	otg_mode;
+	enum phy_mode		otg_phy_mode;
+	unsigned int		usb2_ports;
+	unsigned int		usb3_ports;
+	struct regulator	*vbus;
+	struct usb_role_switch_desc switch_desc;
+	struct usb_role_switch	*role_switch;
+	const struct dwc3_meson_g12a_drvdata *drvdata;
+};
+
+static int dwc3_meson_gxl_set_phy_mode(struct dwc3_meson_g12a *priv,
+					 int i, enum phy_mode mode)
+{
+	return phy_set_mode(priv->phys[i], mode);
+}
+
+static int dwc3_meson_gxl_usb2_init_phy(struct dwc3_meson_g12a *priv, int i,
+					enum phy_mode mode)
+{
+	/* On GXL PHY must be started in device mode for DWC2 init */
+	return priv->drvdata->set_phy_mode(priv, i,
+				(i == USB2_OTG_PHY) ? PHY_MODE_USB_DEVICE
+						    : PHY_MODE_USB_HOST);
+}
+
+static int dwc3_meson_g12a_set_phy_mode(struct dwc3_meson_g12a *priv,
+					 int i, enum phy_mode mode)
+{
+	if (mode == PHY_MODE_USB_HOST)
+		regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
+				U2P_R0_HOST_DEVICE,
+				U2P_R0_HOST_DEVICE);
+	else
+		regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
+				U2P_R0_HOST_DEVICE, 0);
+
+	return 0;
+}
+
+static int dwc3_meson_g12a_usb2_init_phy(struct dwc3_meson_g12a *priv, int i,
+					 enum phy_mode mode)
+{
+	int ret;
+
+	regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
+			U2P_R0_POWER_ON_RESET,
+			U2P_R0_POWER_ON_RESET);
+
+	if (priv->drvdata->otg_switch_supported && i == USB2_OTG_PHY) {
+		regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
+				   U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS,
+				   U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS);
+
+		ret = priv->drvdata->set_phy_mode(priv, i, mode);
+	} else
+		ret = priv->drvdata->set_phy_mode(priv, i,
+						  PHY_MODE_USB_HOST);
+
+	if (ret)
+		return ret;
+
+	regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
+			U2P_R0_POWER_ON_RESET, 0);
+
+	return 0;
+}
+
+static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv,
+				     enum phy_mode mode)
+{
+	int i, ret;
+
+	for (i = 0; i < priv->drvdata->num_phys; ++i) {
+		if (!priv->phys[i])
+			continue;
+
+		if (!strstr(priv->drvdata->phy_names[i], "usb2"))
+			continue;
+
+		ret = priv->drvdata->usb2_init_phy(priv, i, mode);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void dwc3_meson_g12a_usb3_init(struct dwc3_meson_g12a *priv)
+{
+	regmap_update_bits(priv->usb_glue_regmap, USB_R3,
+			USB_R3_P30_SSC_RANGE_MASK |
+			USB_R3_P30_REF_SSP_EN,
+			USB_R3_P30_SSC_ENABLE |
+			FIELD_PREP(USB_R3_P30_SSC_RANGE_MASK, 2) |
+			USB_R3_P30_REF_SSP_EN);
+	udelay(2);
+
+	regmap_update_bits(priv->usb_glue_regmap, USB_R2,
+			USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK,
+			FIELD_PREP(USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK, 0x15));
+
+	regmap_update_bits(priv->usb_glue_regmap, USB_R2,
+			USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK,
+			FIELD_PREP(USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK, 0x20));
+
+	udelay(2);
+
+	regmap_update_bits(priv->usb_glue_regmap, USB_R1,
+			USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT,
+			USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT);
+
+	regmap_update_bits(priv->usb_glue_regmap, USB_R1,
+			USB_R1_P30_PCS_TX_SWING_FULL_MASK,
+			FIELD_PREP(USB_R1_P30_PCS_TX_SWING_FULL_MASK, 127));
+}
+
+static void dwc3_meson_g12a_usb_otg_apply_mode(struct dwc3_meson_g12a *priv,
+					       enum phy_mode mode)
+{
+	if (mode == PHY_MODE_USB_DEVICE) {
+		if (priv->otg_mode != USB_DR_MODE_OTG &&
+		    priv->drvdata->otg_phy_host_port_disable)
+			/* Isolate the OTG PHY port from the Host Controller */
+			regmap_update_bits(priv->usb_glue_regmap, USB_R1,
+				USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK,
+				FIELD_PREP(USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK,
+					   BIT(USB2_OTG_PHY)));
+
+		regmap_update_bits(priv->usb_glue_regmap, USB_R0,
+				USB_R0_U2D_ACT, USB_R0_U2D_ACT);
+		regmap_update_bits(priv->usb_glue_regmap, USB_R0,
+				USB_R0_U2D_SS_SCALEDOWN_MODE_MASK, 0);
+		regmap_update_bits(priv->usb_glue_regmap, USB_R4,
+				USB_R4_P21_SLEEP_M0, USB_R4_P21_SLEEP_M0);
+	} else {
+		if (priv->otg_mode != USB_DR_MODE_OTG &&
+		    priv->drvdata->otg_phy_host_port_disable) {
+			regmap_update_bits(priv->usb_glue_regmap, USB_R1,
+				USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK, 0);
+			msleep(500);
+		}
+		regmap_update_bits(priv->usb_glue_regmap, USB_R0,
+				USB_R0_U2D_ACT, 0);
+		regmap_update_bits(priv->usb_glue_regmap, USB_R4,
+				USB_R4_P21_SLEEP_M0, 0);
+	}
+}
+
+static int dwc3_meson_g12a_usb_init_glue(struct dwc3_meson_g12a *priv,
+					 enum phy_mode mode)
+{
+	int ret;
+
+	ret = dwc3_meson_g12a_usb2_init(priv, mode);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(priv->usb_glue_regmap, USB_R1,
+			USB_R1_U3H_FLADJ_30MHZ_REG_MASK,
+			FIELD_PREP(USB_R1_U3H_FLADJ_30MHZ_REG_MASK, 0x20));
+
+	regmap_update_bits(priv->usb_glue_regmap, USB_R5,
+			USB_R5_ID_DIG_EN_0,
+			USB_R5_ID_DIG_EN_0);
+	regmap_update_bits(priv->usb_glue_regmap, USB_R5,
+			USB_R5_ID_DIG_EN_1,
+			USB_R5_ID_DIG_EN_1);
+	regmap_update_bits(priv->usb_glue_regmap, USB_R5,
+			USB_R5_ID_DIG_TH_MASK,
+			FIELD_PREP(USB_R5_ID_DIG_TH_MASK, 0xff));
+
+	/* If we have an actual SuperSpeed port, initialize it */
+	if (priv->usb3_ports)
+		dwc3_meson_g12a_usb3_init(priv);
+
+	dwc3_meson_g12a_usb_otg_apply_mode(priv, mode);
+
+	return 0;
+}
+
+static const struct regmap_config phy_meson_g12a_usb_glue_regmap_conf = {
+	.name = "usb-glue",
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = USB_R5,
+};
+
+static int dwc3_meson_g12a_get_phys(struct dwc3_meson_g12a *priv)
+{
+	const char *phy_name;
+	int i;
+
+	for (i = 0 ; i < priv->drvdata->num_phys ; ++i) {
+		phy_name = priv->drvdata->phy_names[i];
+		priv->phys[i] = devm_phy_optional_get(priv->dev, phy_name);
+		if (!priv->phys[i])
+			continue;
+
+		if (IS_ERR(priv->phys[i]))
+			return PTR_ERR(priv->phys[i]);
+
+		if (strstr(phy_name, "usb3"))
+			priv->usb3_ports++;
+		else
+			priv->usb2_ports++;
+	}
+
+	dev_info(priv->dev, "USB2 ports: %d\n", priv->usb2_ports);
+	dev_info(priv->dev, "USB3 ports: %d\n", priv->usb3_ports);
+
+	return 0;
+}
+
+static enum phy_mode dwc3_meson_g12a_get_id(struct dwc3_meson_g12a *priv)
+{
+	u32 reg;
+
+	regmap_read(priv->usb_glue_regmap, USB_R5, &reg);
+
+	if (reg & (USB_R5_ID_DIG_SYNC | USB_R5_ID_DIG_REG))
+		return PHY_MODE_USB_DEVICE;
+
+	return PHY_MODE_USB_HOST;
+}
+
+static int dwc3_meson_g12a_otg_mode_set(struct dwc3_meson_g12a *priv,
+					enum phy_mode mode)
+{
+	int ret;
+
+	if (!priv->drvdata->otg_switch_supported || !priv->phys[USB2_OTG_PHY])
+		return -EINVAL;
+
+	if (mode == PHY_MODE_USB_HOST)
+		dev_info(priv->dev, "switching to Host Mode\n");
+	else
+		dev_info(priv->dev, "switching to Device Mode\n");
+
+	if (priv->vbus) {
+		if (mode == PHY_MODE_USB_DEVICE)
+			ret = regulator_disable(priv->vbus);
+		else
+			ret = regulator_enable(priv->vbus);
+		if (ret)
+			return ret;
+	}
+
+	priv->otg_phy_mode = mode;
+
+	ret = priv->drvdata->set_phy_mode(priv, USB2_OTG_PHY, mode);
+	if (ret)
+		return ret;
+
+	dwc3_meson_g12a_usb_otg_apply_mode(priv, mode);
+
+	return 0;
+}
+
+static int dwc3_meson_g12a_role_set(struct usb_role_switch *sw,
+				    enum usb_role role)
+{
+	struct dwc3_meson_g12a *priv = usb_role_switch_get_drvdata(sw);
+	enum phy_mode mode;
+
+	if (role == USB_ROLE_NONE)
+		return 0;
+
+	mode = (role == USB_ROLE_HOST) ? PHY_MODE_USB_HOST
+				       : PHY_MODE_USB_DEVICE;
+
+	if (mode == priv->otg_phy_mode)
+		return 0;
+
+	if (priv->drvdata->otg_phy_host_port_disable)
+		dev_warn_once(priv->dev, "Broken manual OTG switch\n");
+
+	return dwc3_meson_g12a_otg_mode_set(priv, mode);
+}
+
+static enum usb_role dwc3_meson_g12a_role_get(struct usb_role_switch *sw)
+{
+	struct dwc3_meson_g12a *priv = usb_role_switch_get_drvdata(sw);
+
+	return priv->otg_phy_mode == PHY_MODE_USB_HOST ?
+		USB_ROLE_HOST : USB_ROLE_DEVICE;
+}
+
+static irqreturn_t dwc3_meson_g12a_irq_thread(int irq, void *data)
+{
+	struct dwc3_meson_g12a *priv = data;
+	enum phy_mode otg_id;
+
+	otg_id = dwc3_meson_g12a_get_id(priv);
+	if (otg_id != priv->otg_phy_mode) {
+		if (dwc3_meson_g12a_otg_mode_set(priv, otg_id))
+			dev_warn(priv->dev, "Failed to switch OTG mode\n");
+	}
+
+	regmap_update_bits(priv->usb_glue_regmap, USB_R5,
+			   USB_R5_ID_DIG_IRQ, 0);
+
+	return IRQ_HANDLED;
+}
+
+static struct device *dwc3_meson_g12_find_child(struct device *dev,
+						const char *compatible)
+{
+	struct platform_device *pdev;
+	struct device_node *np;
+
+	np = of_get_compatible_child(dev->of_node, compatible);
+	if (!np)
+		return NULL;
+
+	pdev = of_find_device_by_node(np);
+	of_node_put(np);
+	if (!pdev)
+		return NULL;
+
+	return &pdev->dev;
+}
+
+static int dwc3_meson_g12a_otg_init(struct platform_device *pdev,
+				    struct dwc3_meson_g12a *priv)
+{
+	enum phy_mode otg_id;
+	int ret, irq;
+	struct device *dev = &pdev->dev;
+
+	if (!priv->drvdata->otg_switch_supported)
+		return 0;
+
+	if (priv->otg_mode == USB_DR_MODE_OTG) {
+		/* Ack irq before registering */
+		regmap_update_bits(priv->usb_glue_regmap, USB_R5,
+				   USB_R5_ID_DIG_IRQ, 0);
+
+		irq = platform_get_irq(pdev, 0);
+		if (irq < 0)
+			return irq;
+		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+						dwc3_meson_g12a_irq_thread,
+						IRQF_ONESHOT, pdev->name, priv);
+		if (ret)
+			return ret;
+	}
+
+	/* Setup OTG mode corresponding to the ID pin */
+	if (priv->otg_mode == USB_DR_MODE_OTG) {
+		otg_id = dwc3_meson_g12a_get_id(priv);
+		if (otg_id != priv->otg_phy_mode) {
+			if (dwc3_meson_g12a_otg_mode_set(priv, otg_id))
+				dev_warn(dev, "Failed to switch OTG mode\n");
+		}
+	}
+
+	/* Setup role switcher */
+	priv->switch_desc.usb2_port = dwc3_meson_g12_find_child(dev,
+								"snps,dwc3");
+	priv->switch_desc.udc = dwc3_meson_g12_find_child(dev, "snps,dwc2");
+	priv->switch_desc.allow_userspace_control = true;
+	priv->switch_desc.set = dwc3_meson_g12a_role_set;
+	priv->switch_desc.get = dwc3_meson_g12a_role_get;
+	priv->switch_desc.driver_data = priv;
+
+	priv->role_switch = usb_role_switch_register(dev, &priv->switch_desc);
+	if (IS_ERR(priv->role_switch))
+		dev_warn(dev, "Unable to register Role Switch\n");
+
+	return 0;
+}
+
+static int dwc3_meson_gxl_setup_regmaps(struct dwc3_meson_g12a *priv,
+					void __iomem *base)
+{
+	/* GXL controls the PHY mode in the PHY registers unlike G12A */
+	priv->usb_glue_regmap = devm_regmap_init_mmio(priv->dev, base,
+					&phy_meson_g12a_usb_glue_regmap_conf);
+	return PTR_ERR_OR_ZERO(priv->usb_glue_regmap);
+}
+
+static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
+					 void __iomem *base)
+{
+	int i;
+
+	priv->usb_glue_regmap = devm_regmap_init_mmio(priv->dev,
+					base + G12A_GLUE_OFFSET,
+					&phy_meson_g12a_usb_glue_regmap_conf);
+	if (IS_ERR(priv->usb_glue_regmap))
+		return PTR_ERR(priv->usb_glue_regmap);
+
+	/* Create a regmap for each USB2 PHY control register set */
+	for (i = 0; i < priv->drvdata->num_phys; i++) {
+		struct regmap_config u2p_regmap_config = {
+			.reg_bits = 8,
+			.val_bits = 32,
+			.reg_stride = 4,
+			.max_register = U2P_R1,
+		};
+
+		if (!strstr(priv->drvdata->phy_names[i], "usb2"))
+			continue;
+
+		u2p_regmap_config.name = devm_kasprintf(priv->dev, GFP_KERNEL,
+							"u2p-%d", i);
+		if (!u2p_regmap_config.name)
+			return -ENOMEM;
+
+		priv->u2p_regmap[i] = devm_regmap_init_mmio(priv->dev,
+						base + (i * U2P_REG_SIZE),
+						&u2p_regmap_config);
+		if (IS_ERR(priv->u2p_regmap[i]))
+			return PTR_ERR(priv->u2p_regmap[i]);
+	}
+
+	return 0;
+}
+
+static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv)
+{
+	return dwc3_meson_g12a_usb_init_glue(priv, priv->otg_phy_mode);
+}
+
+static int dwc3_meson_gxl_usb_init(struct dwc3_meson_g12a *priv)
+{
+	return dwc3_meson_g12a_usb_init_glue(priv, PHY_MODE_USB_DEVICE);
+}
+
+static int dwc3_meson_gxl_usb_post_init(struct dwc3_meson_g12a *priv)
+{
+	int ret;
+
+	ret = priv->drvdata->set_phy_mode(priv, USB2_OTG_PHY,
+					  priv->otg_phy_mode);
+	if (ret)
+		return ret;
+
+	dwc3_meson_g12a_usb_otg_apply_mode(priv, priv->otg_phy_mode);
+
+	return 0;
+}
+
+static int dwc3_meson_g12a_probe(struct platform_device *pdev)
+{
+	struct dwc3_meson_g12a	*priv;
+	struct device		*dev = &pdev->dev;
+	struct device_node	*np = dev->of_node;
+	void __iomem *base;
+	int ret, i;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->drvdata = of_device_get_match_data(&pdev->dev);
+	priv->dev = dev;
+
+	priv->vbus = devm_regulator_get_optional(dev, "vbus");
+	if (IS_ERR(priv->vbus)) {
+		if (PTR_ERR(priv->vbus) == -EPROBE_DEFER)
+			return PTR_ERR(priv->vbus);
+		priv->vbus = NULL;
+	}
+
+	ret = devm_clk_bulk_get(dev,
+				priv->drvdata->num_clks,
+				priv->drvdata->clks);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(priv->drvdata->num_clks,
+				      priv->drvdata->clks);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, priv);
+
+	priv->reset = devm_reset_control_get_shared(dev, NULL);
+	if (IS_ERR(priv->reset)) {
+		ret = PTR_ERR(priv->reset);
+		dev_err(dev, "failed to get device reset, err=%d\n", ret);
+		goto err_disable_clks;
+	}
+
+	ret = reset_control_reset(priv->reset);
+	if (ret)
+		goto err_disable_clks;
+
+	ret = dwc3_meson_g12a_get_phys(priv);
+	if (ret)
+		goto err_rearm;
+
+	ret = priv->drvdata->setup_regmaps(priv, base);
+	if (ret)
+		goto err_rearm;
+
+	if (priv->vbus) {
+		ret = regulator_enable(priv->vbus);
+		if (ret)
+			goto err_rearm;
+	}
+
+	/* Get dr_mode */
+	priv->otg_mode = usb_get_dr_mode(dev);
+
+	if (priv->otg_mode == USB_DR_MODE_PERIPHERAL)
+		priv->otg_phy_mode = PHY_MODE_USB_DEVICE;
+	else
+		priv->otg_phy_mode = PHY_MODE_USB_HOST;
+
+	ret = priv->drvdata->usb_init(priv);
+	if (ret)
+		goto err_disable_regulator;
+
+	/* Init PHYs */
+	for (i = 0 ; i < PHY_COUNT ; ++i) {
+		ret = phy_init(priv->phys[i]);
+		if (ret)
+			goto err_disable_regulator;
+	}
+
+	/* Set PHY Power */
+	for (i = 0 ; i < PHY_COUNT ; ++i) {
+		ret = phy_power_on(priv->phys[i]);
+		if (ret)
+			goto err_phys_exit;
+	}
+
+	if (priv->drvdata->usb_post_init) {
+		ret = priv->drvdata->usb_post_init(priv);
+		if (ret)
+			goto err_phys_power;
+	}
+
+	ret = of_platform_populate(np, NULL, NULL, dev);
+	if (ret)
+		goto err_phys_power;
+
+	ret = dwc3_meson_g12a_otg_init(pdev, priv);
+	if (ret)
+		goto err_plat_depopulate;
+
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	return 0;
+
+err_plat_depopulate:
+	of_platform_depopulate(dev);
+
+err_phys_power:
+	for (i = 0 ; i < PHY_COUNT ; ++i)
+		phy_power_off(priv->phys[i]);
+
+err_phys_exit:
+	for (i = 0 ; i < PHY_COUNT ; ++i)
+		phy_exit(priv->phys[i]);
+
+err_disable_regulator:
+	if (priv->vbus)
+		regulator_disable(priv->vbus);
+
+err_rearm:
+	reset_control_rearm(priv->reset);
+
+err_disable_clks:
+	clk_bulk_disable_unprepare(priv->drvdata->num_clks,
+				   priv->drvdata->clks);
+
+	return ret;
+}
+
+static int dwc3_meson_g12a_remove(struct platform_device *pdev)
+{
+	struct dwc3_meson_g12a *priv = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	int i;
+
+	if (priv->drvdata->otg_switch_supported)
+		usb_role_switch_unregister(priv->role_switch);
+
+	of_platform_depopulate(dev);
+
+	for (i = 0 ; i < PHY_COUNT ; ++i) {
+		phy_power_off(priv->phys[i]);
+		phy_exit(priv->phys[i]);
+	}
+
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
+	pm_runtime_set_suspended(dev);
+
+	reset_control_rearm(priv->reset);
+
+	clk_bulk_disable_unprepare(priv->drvdata->num_clks,
+				   priv->drvdata->clks);
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_meson_g12a_runtime_suspend(struct device *dev)
+{
+	struct dwc3_meson_g12a	*priv = dev_get_drvdata(dev);
+
+	clk_bulk_disable_unprepare(priv->drvdata->num_clks,
+				   priv->drvdata->clks);
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_meson_g12a_runtime_resume(struct device *dev)
+{
+	struct dwc3_meson_g12a	*priv = dev_get_drvdata(dev);
+
+	return clk_bulk_prepare_enable(priv->drvdata->num_clks,
+				       priv->drvdata->clks);
+}
+
+static int __maybe_unused dwc3_meson_g12a_suspend(struct device *dev)
+{
+	struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
+	int i, ret;
+
+	if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
+		ret = regulator_disable(priv->vbus);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0 ; i < PHY_COUNT ; ++i) {
+		phy_power_off(priv->phys[i]);
+		phy_exit(priv->phys[i]);
+	}
+
+	reset_control_rearm(priv->reset);
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev)
+{
+	struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
+	int i, ret;
+
+	ret = reset_control_reset(priv->reset);
+	if (ret)
+		return ret;
+
+	ret = priv->drvdata->usb_init(priv);
+	if (ret)
+		return ret;
+
+	/* Init PHYs */
+	for (i = 0 ; i < PHY_COUNT ; ++i) {
+		ret = phy_init(priv->phys[i]);
+		if (ret)
+			return ret;
+	}
+
+	/* Set PHY Power */
+	for (i = 0 ; i < PHY_COUNT ; ++i) {
+		ret = phy_power_on(priv->phys[i]);
+		if (ret)
+			return ret;
+	}
+
+	if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
+		ret = regulator_enable(priv->vbus);
+		if (ret)
+			return ret;
+	}
+
+	if (priv->drvdata->usb_post_init) {
+		ret = priv->drvdata->usb_post_init(priv);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops dwc3_meson_g12a_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwc3_meson_g12a_suspend, dwc3_meson_g12a_resume)
+	SET_RUNTIME_PM_OPS(dwc3_meson_g12a_runtime_suspend,
+			   dwc3_meson_g12a_runtime_resume, NULL)
+};
+
+static const struct of_device_id dwc3_meson_g12a_match[] = {
+	{
+		.compatible = "amlogic,meson-gxl-usb-ctrl",
+		.data = &gxl_drvdata,
+	},
+	{
+		.compatible = "amlogic,meson-gxm-usb-ctrl",
+		.data = &gxm_drvdata,
+	},
+	{
+		.compatible = "amlogic,meson-axg-usb-ctrl",
+		.data = &axg_drvdata,
+	},
+	{
+		.compatible = "amlogic,meson-g12a-usb-ctrl",
+		.data = &g12a_drvdata,
+	},
+	{
+		.compatible = "amlogic,meson-a1-usb-ctrl",
+		.data = &a1_drvdata,
+	},
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, dwc3_meson_g12a_match);
+
+static struct platform_driver dwc3_meson_g12a_driver = {
+	.probe		= dwc3_meson_g12a_probe,
+	.remove		= dwc3_meson_g12a_remove,
+	.driver		= {
+		.name	= "dwc3-meson-g12a",
+		.of_match_table = dwc3_meson_g12a_match,
+		.pm	= &dwc3_meson_g12a_dev_pm_ops,
+	},
+};
+
+module_platform_driver(dwc3_meson_g12a_driver);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Amlogic Meson G12A USB Glue Layer");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
new file mode 100644
index 000000000..71fd620c5
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dwc3-of-simple.c - OF glue layer for simple integrations
+ *
+ * Copyright (c) 2015 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * This is a combination of the old dwc3-qcom.c by Ivan T. Ivanov
+ * <iivanov@mm-sol.com> and the original patch adding support for Xilinx' SoC
+ * by Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+struct dwc3_of_simple {
+	struct device		*dev;
+	struct clk_bulk_data	*clks;
+	int			num_clocks;
+	struct reset_control	*resets;
+	bool			need_reset;
+};
+
+static int dwc3_of_simple_probe(struct platform_device *pdev)
+{
+	struct dwc3_of_simple	*simple;
+	struct device		*dev = &pdev->dev;
+	struct device_node	*np = dev->of_node;
+
+	int			ret;
+
+	simple = devm_kzalloc(dev, sizeof(*simple), GFP_KERNEL);
+	if (!simple)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, simple);
+	simple->dev = dev;
+
+	/*
+	 * Some controllers need to toggle the usb3-otg reset before trying to
+	 * initialize the PHY, otherwise the PHY times out.
+	 */
+	if (of_device_is_compatible(np, "rockchip,rk3399-dwc3"))
+		simple->need_reset = true;
+
+	simple->resets = of_reset_control_array_get(np, false, true,
+						    true);
+	if (IS_ERR(simple->resets)) {
+		ret = PTR_ERR(simple->resets);
+		dev_err(dev, "failed to get device resets, err=%d\n", ret);
+		return ret;
+	}
+
+	ret = reset_control_deassert(simple->resets);
+	if (ret)
+		goto err_resetc_put;
+
+	ret = clk_bulk_get_all(simple->dev, &simple->clks);
+	if (ret < 0)
+		goto err_resetc_assert;
+
+	simple->num_clocks = ret;
+	ret = clk_bulk_prepare_enable(simple->num_clocks, simple->clks);
+	if (ret)
+		goto err_resetc_assert;
+
+	ret = of_platform_populate(np, NULL, NULL, dev);
+	if (ret)
+		goto err_clk_put;
+
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	return 0;
+
+err_clk_put:
+	clk_bulk_disable_unprepare(simple->num_clocks, simple->clks);
+	clk_bulk_put_all(simple->num_clocks, simple->clks);
+
+err_resetc_assert:
+	reset_control_assert(simple->resets);
+
+err_resetc_put:
+	reset_control_put(simple->resets);
+	return ret;
+}
+
+static void __dwc3_of_simple_teardown(struct dwc3_of_simple *simple)
+{
+	of_platform_depopulate(simple->dev);
+
+	clk_bulk_disable_unprepare(simple->num_clocks, simple->clks);
+	clk_bulk_put_all(simple->num_clocks, simple->clks);
+	simple->num_clocks = 0;
+
+	reset_control_assert(simple->resets);
+
+	reset_control_put(simple->resets);
+
+	pm_runtime_disable(simple->dev);
+	pm_runtime_put_noidle(simple->dev);
+	pm_runtime_set_suspended(simple->dev);
+}
+
+static int dwc3_of_simple_remove(struct platform_device *pdev)
+{
+	struct dwc3_of_simple	*simple = platform_get_drvdata(pdev);
+
+	__dwc3_of_simple_teardown(simple);
+
+	return 0;
+}
+
+static void dwc3_of_simple_shutdown(struct platform_device *pdev)
+{
+	struct dwc3_of_simple	*simple = platform_get_drvdata(pdev);
+
+	__dwc3_of_simple_teardown(simple);
+}
+
+static int __maybe_unused dwc3_of_simple_runtime_suspend(struct device *dev)
+{
+	struct dwc3_of_simple	*simple = dev_get_drvdata(dev);
+
+	clk_bulk_disable(simple->num_clocks, simple->clks);
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_of_simple_runtime_resume(struct device *dev)
+{
+	struct dwc3_of_simple	*simple = dev_get_drvdata(dev);
+
+	return clk_bulk_enable(simple->num_clocks, simple->clks);
+}
+
+static int __maybe_unused dwc3_of_simple_suspend(struct device *dev)
+{
+	struct dwc3_of_simple *simple = dev_get_drvdata(dev);
+
+	if (simple->need_reset)
+		reset_control_assert(simple->resets);
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_of_simple_resume(struct device *dev)
+{
+	struct dwc3_of_simple *simple = dev_get_drvdata(dev);
+
+	if (simple->need_reset)
+		reset_control_deassert(simple->resets);
+
+	return 0;
+}
+
+static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwc3_of_simple_suspend, dwc3_of_simple_resume)
+	SET_RUNTIME_PM_OPS(dwc3_of_simple_runtime_suspend,
+			dwc3_of_simple_runtime_resume, NULL)
+};
+
+static const struct of_device_id of_dwc3_simple_match[] = {
+	{ .compatible = "rockchip,rk3399-dwc3" },
+	{ .compatible = "cavium,octeon-7130-usb-uctl" },
+	{ .compatible = "sprd,sc9860-dwc3" },
+	{ .compatible = "allwinner,sun50i-h6-dwc3" },
+	{ .compatible = "hisilicon,hi3670-dwc3" },
+	{ .compatible = "intel,keembay-dwc3" },
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_dwc3_simple_match);
+
+static struct platform_driver dwc3_of_simple_driver = {
+	.probe		= dwc3_of_simple_probe,
+	.remove		= dwc3_of_simple_remove,
+	.shutdown	= dwc3_of_simple_shutdown,
+	.driver		= {
+		.name	= "dwc3-of-simple",
+		.of_match_table = of_dwc3_simple_match,
+		.pm	= &dwc3_of_simple_dev_pm_ops,
+	},
+};
+
+module_platform_driver(dwc3_of_simple_driver);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare USB3 OF Simple Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
new file mode 100644
index 000000000..efaf0db59
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -0,0 +1,627 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dwc3-omap.c - OMAP Specific Glue layer
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/extcon.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/usb/otg.h>
+
+/*
+ * All these registers belong to OMAP's Wrapper around the
+ * DesignWare USB3 Core.
+ */
+
+#define USBOTGSS_REVISION			0x0000
+#define USBOTGSS_SYSCONFIG			0x0010
+#define USBOTGSS_IRQ_EOI			0x0020
+#define USBOTGSS_EOI_OFFSET			0x0008
+#define USBOTGSS_IRQSTATUS_RAW_0		0x0024
+#define USBOTGSS_IRQSTATUS_0			0x0028
+#define USBOTGSS_IRQENABLE_SET_0		0x002c
+#define USBOTGSS_IRQENABLE_CLR_0		0x0030
+#define USBOTGSS_IRQ0_OFFSET			0x0004
+#define USBOTGSS_IRQSTATUS_RAW_1		0x0030
+#define USBOTGSS_IRQSTATUS_1			0x0034
+#define USBOTGSS_IRQENABLE_SET_1		0x0038
+#define USBOTGSS_IRQENABLE_CLR_1		0x003c
+#define USBOTGSS_IRQSTATUS_RAW_2		0x0040
+#define USBOTGSS_IRQSTATUS_2			0x0044
+#define USBOTGSS_IRQENABLE_SET_2		0x0048
+#define USBOTGSS_IRQENABLE_CLR_2		0x004c
+#define USBOTGSS_IRQSTATUS_RAW_3		0x0050
+#define USBOTGSS_IRQSTATUS_3			0x0054
+#define USBOTGSS_IRQENABLE_SET_3		0x0058
+#define USBOTGSS_IRQENABLE_CLR_3		0x005c
+#define USBOTGSS_IRQSTATUS_EOI_MISC		0x0030
+#define USBOTGSS_IRQSTATUS_RAW_MISC		0x0034
+#define USBOTGSS_IRQSTATUS_MISC			0x0038
+#define USBOTGSS_IRQENABLE_SET_MISC		0x003c
+#define USBOTGSS_IRQENABLE_CLR_MISC		0x0040
+#define USBOTGSS_IRQMISC_OFFSET			0x03fc
+#define USBOTGSS_UTMI_OTG_STATUS		0x0080
+#define USBOTGSS_UTMI_OTG_CTRL			0x0084
+#define USBOTGSS_UTMI_OTG_OFFSET		0x0480
+#define USBOTGSS_TXFIFO_DEPTH			0x0508
+#define USBOTGSS_RXFIFO_DEPTH			0x050c
+#define USBOTGSS_MMRAM_OFFSET			0x0100
+#define USBOTGSS_FLADJ				0x0104
+#define USBOTGSS_DEBUG_CFG			0x0108
+#define USBOTGSS_DEBUG_DATA			0x010c
+#define USBOTGSS_DEV_EBC_EN			0x0110
+#define USBOTGSS_DEBUG_OFFSET			0x0600
+
+/* SYSCONFIG REGISTER */
+#define USBOTGSS_SYSCONFIG_DMADISABLE		BIT(16)
+
+/* IRQ_EOI REGISTER */
+#define USBOTGSS_IRQ_EOI_LINE_NUMBER		BIT(0)
+
+/* IRQS0 BITS */
+#define USBOTGSS_IRQO_COREIRQ_ST		BIT(0)
+
+/* IRQMISC BITS */
+#define USBOTGSS_IRQMISC_DMADISABLECLR		BIT(17)
+#define USBOTGSS_IRQMISC_OEVT			BIT(16)
+#define USBOTGSS_IRQMISC_DRVVBUS_RISE		BIT(13)
+#define USBOTGSS_IRQMISC_CHRGVBUS_RISE		BIT(12)
+#define USBOTGSS_IRQMISC_DISCHRGVBUS_RISE	BIT(11)
+#define USBOTGSS_IRQMISC_IDPULLUP_RISE		BIT(8)
+#define USBOTGSS_IRQMISC_DRVVBUS_FALL		BIT(5)
+#define USBOTGSS_IRQMISC_CHRGVBUS_FALL		BIT(4)
+#define USBOTGSS_IRQMISC_DISCHRGVBUS_FALL		BIT(3)
+#define USBOTGSS_IRQMISC_IDPULLUP_FALL		BIT(0)
+
+/* UTMI_OTG_STATUS REGISTER */
+#define USBOTGSS_UTMI_OTG_STATUS_DRVVBUS	BIT(5)
+#define USBOTGSS_UTMI_OTG_STATUS_CHRGVBUS	BIT(4)
+#define USBOTGSS_UTMI_OTG_STATUS_DISCHRGVBUS	BIT(3)
+#define USBOTGSS_UTMI_OTG_STATUS_IDPULLUP	BIT(0)
+
+/* UTMI_OTG_CTRL REGISTER */
+#define USBOTGSS_UTMI_OTG_CTRL_SW_MODE		BIT(31)
+#define USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT	BIT(9)
+#define USBOTGSS_UTMI_OTG_CTRL_TXBITSTUFFENABLE BIT(8)
+#define USBOTGSS_UTMI_OTG_CTRL_IDDIG		BIT(4)
+#define USBOTGSS_UTMI_OTG_CTRL_SESSEND		BIT(3)
+#define USBOTGSS_UTMI_OTG_CTRL_SESSVALID	BIT(2)
+#define USBOTGSS_UTMI_OTG_CTRL_VBUSVALID	BIT(1)
+
+enum dwc3_omap_utmi_mode {
+	DWC3_OMAP_UTMI_MODE_UNKNOWN = 0,
+	DWC3_OMAP_UTMI_MODE_HW,
+	DWC3_OMAP_UTMI_MODE_SW,
+};
+
+struct dwc3_omap {
+	struct device		*dev;
+
+	int			irq;
+	void __iomem		*base;
+
+	u32			utmi_otg_ctrl;
+	u32			utmi_otg_offset;
+	u32			irqmisc_offset;
+	u32			irq_eoi_offset;
+	u32			debug_offset;
+	u32			irq0_offset;
+
+	struct extcon_dev	*edev;
+	struct notifier_block	vbus_nb;
+	struct notifier_block	id_nb;
+
+	struct regulator	*vbus_reg;
+};
+
+enum omap_dwc3_vbus_id_status {
+	OMAP_DWC3_ID_FLOAT,
+	OMAP_DWC3_ID_GROUND,
+	OMAP_DWC3_VBUS_OFF,
+	OMAP_DWC3_VBUS_VALID,
+};
+
+static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset)
+{
+	return readl(base + offset);
+}
+
+static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value)
+{
+	writel(value, base + offset);
+}
+
+static u32 dwc3_omap_read_utmi_ctrl(struct dwc3_omap *omap)
+{
+	return dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_CTRL +
+							omap->utmi_otg_offset);
+}
+
+static void dwc3_omap_write_utmi_ctrl(struct dwc3_omap *omap, u32 value)
+{
+	dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_CTRL +
+					omap->utmi_otg_offset, value);
+
+}
+
+static u32 dwc3_omap_read_irq0_status(struct dwc3_omap *omap)
+{
+	return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_RAW_0 -
+						omap->irq0_offset);
+}
+
+static void dwc3_omap_write_irq0_status(struct dwc3_omap *omap, u32 value)
+{
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_0 -
+						omap->irq0_offset, value);
+
+}
+
+static u32 dwc3_omap_read_irqmisc_status(struct dwc3_omap *omap)
+{
+	return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_RAW_MISC +
+						omap->irqmisc_offset);
+}
+
+static void dwc3_omap_write_irqmisc_status(struct dwc3_omap *omap, u32 value)
+{
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_MISC +
+					omap->irqmisc_offset, value);
+
+}
+
+static void dwc3_omap_write_irqmisc_set(struct dwc3_omap *omap, u32 value)
+{
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_MISC +
+						omap->irqmisc_offset, value);
+
+}
+
+static void dwc3_omap_write_irq0_set(struct dwc3_omap *omap, u32 value)
+{
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0 -
+						omap->irq0_offset, value);
+}
+
+static void dwc3_omap_write_irqmisc_clr(struct dwc3_omap *omap, u32 value)
+{
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_CLR_MISC +
+						omap->irqmisc_offset, value);
+}
+
+static void dwc3_omap_write_irq0_clr(struct dwc3_omap *omap, u32 value)
+{
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_CLR_0 -
+						omap->irq0_offset, value);
+}
+
+static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
+	enum omap_dwc3_vbus_id_status status)
+{
+	int	ret;
+	u32	val;
+
+	switch (status) {
+	case OMAP_DWC3_ID_GROUND:
+		if (omap->vbus_reg) {
+			ret = regulator_enable(omap->vbus_reg);
+			if (ret) {
+				dev_err(omap->dev, "regulator enable failed\n");
+				return;
+			}
+		}
+
+		val = dwc3_omap_read_utmi_ctrl(omap);
+		val &= ~USBOTGSS_UTMI_OTG_CTRL_IDDIG;
+		dwc3_omap_write_utmi_ctrl(omap, val);
+		break;
+
+	case OMAP_DWC3_VBUS_VALID:
+		val = dwc3_omap_read_utmi_ctrl(omap);
+		val &= ~USBOTGSS_UTMI_OTG_CTRL_SESSEND;
+		val |= USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
+				| USBOTGSS_UTMI_OTG_CTRL_SESSVALID;
+		dwc3_omap_write_utmi_ctrl(omap, val);
+		break;
+
+	case OMAP_DWC3_ID_FLOAT:
+		if (omap->vbus_reg && regulator_is_enabled(omap->vbus_reg))
+			regulator_disable(omap->vbus_reg);
+		val = dwc3_omap_read_utmi_ctrl(omap);
+		val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG;
+		dwc3_omap_write_utmi_ctrl(omap, val);
+		break;
+
+	case OMAP_DWC3_VBUS_OFF:
+		val = dwc3_omap_read_utmi_ctrl(omap);
+		val &= ~(USBOTGSS_UTMI_OTG_CTRL_SESSVALID
+				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID);
+		val |= USBOTGSS_UTMI_OTG_CTRL_SESSEND;
+		dwc3_omap_write_utmi_ctrl(omap, val);
+		break;
+
+	default:
+		dev_WARN(omap->dev, "invalid state\n");
+	}
+}
+
+static void dwc3_omap_enable_irqs(struct dwc3_omap *omap);
+static void dwc3_omap_disable_irqs(struct dwc3_omap *omap);
+
+static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
+{
+	struct dwc3_omap	*omap = _omap;
+
+	if (dwc3_omap_read_irqmisc_status(omap) ||
+	    dwc3_omap_read_irq0_status(omap)) {
+		/* mask irqs */
+		dwc3_omap_disable_irqs(omap);
+		return IRQ_WAKE_THREAD;
+	}
+
+	return IRQ_NONE;
+}
+
+static irqreturn_t dwc3_omap_interrupt_thread(int irq, void *_omap)
+{
+	struct dwc3_omap	*omap = _omap;
+	u32			reg;
+
+	/* clear irq status flags */
+	reg = dwc3_omap_read_irqmisc_status(omap);
+	dwc3_omap_write_irqmisc_status(omap, reg);
+
+	reg = dwc3_omap_read_irq0_status(omap);
+	dwc3_omap_write_irq0_status(omap, reg);
+
+	/* unmask irqs */
+	dwc3_omap_enable_irqs(omap);
+
+	return IRQ_HANDLED;
+}
+
+static void dwc3_omap_enable_irqs(struct dwc3_omap *omap)
+{
+	u32			reg;
+
+	/* enable all IRQs */
+	reg = USBOTGSS_IRQO_COREIRQ_ST;
+	dwc3_omap_write_irq0_set(omap, reg);
+
+	reg = (USBOTGSS_IRQMISC_OEVT |
+			USBOTGSS_IRQMISC_DRVVBUS_RISE |
+			USBOTGSS_IRQMISC_CHRGVBUS_RISE |
+			USBOTGSS_IRQMISC_DISCHRGVBUS_RISE |
+			USBOTGSS_IRQMISC_IDPULLUP_RISE |
+			USBOTGSS_IRQMISC_DRVVBUS_FALL |
+			USBOTGSS_IRQMISC_CHRGVBUS_FALL |
+			USBOTGSS_IRQMISC_DISCHRGVBUS_FALL |
+			USBOTGSS_IRQMISC_IDPULLUP_FALL);
+
+	dwc3_omap_write_irqmisc_set(omap, reg);
+}
+
+static void dwc3_omap_disable_irqs(struct dwc3_omap *omap)
+{
+	u32			reg;
+
+	/* disable all IRQs */
+	reg = USBOTGSS_IRQO_COREIRQ_ST;
+	dwc3_omap_write_irq0_clr(omap, reg);
+
+	reg = (USBOTGSS_IRQMISC_OEVT |
+			USBOTGSS_IRQMISC_DRVVBUS_RISE |
+			USBOTGSS_IRQMISC_CHRGVBUS_RISE |
+			USBOTGSS_IRQMISC_DISCHRGVBUS_RISE |
+			USBOTGSS_IRQMISC_IDPULLUP_RISE |
+			USBOTGSS_IRQMISC_DRVVBUS_FALL |
+			USBOTGSS_IRQMISC_CHRGVBUS_FALL |
+			USBOTGSS_IRQMISC_DISCHRGVBUS_FALL |
+			USBOTGSS_IRQMISC_IDPULLUP_FALL);
+
+	dwc3_omap_write_irqmisc_clr(omap, reg);
+}
+
+static int dwc3_omap_id_notifier(struct notifier_block *nb,
+	unsigned long event, void *ptr)
+{
+	struct dwc3_omap *omap = container_of(nb, struct dwc3_omap, id_nb);
+
+	if (event)
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
+	else
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_FLOAT);
+
+	return NOTIFY_DONE;
+}
+
+static int dwc3_omap_vbus_notifier(struct notifier_block *nb,
+	unsigned long event, void *ptr)
+{
+	struct dwc3_omap *omap = container_of(nb, struct dwc3_omap, vbus_nb);
+
+	if (event)
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
+	else
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_OFF);
+
+	return NOTIFY_DONE;
+}
+
+static void dwc3_omap_map_offset(struct dwc3_omap *omap)
+{
+	struct device_node	*node = omap->dev->of_node;
+
+	/*
+	 * Differentiate between OMAP5 and AM437x.
+	 *
+	 * For OMAP5(ES2.0) and AM437x wrapper revision is same, even
+	 * though there are changes in wrapper register offsets.
+	 *
+	 * Using dt compatible to differentiate AM437x.
+	 */
+	if (of_device_is_compatible(node, "ti,am437x-dwc3")) {
+		omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
+		omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
+		omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
+		omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
+		omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
+	}
+}
+
+static void dwc3_omap_set_utmi_mode(struct dwc3_omap *omap)
+{
+	u32			reg;
+	struct device_node	*node = omap->dev->of_node;
+	u32			utmi_mode = 0;
+
+	reg = dwc3_omap_read_utmi_ctrl(omap);
+
+	of_property_read_u32(node, "utmi-mode", &utmi_mode);
+
+	switch (utmi_mode) {
+	case DWC3_OMAP_UTMI_MODE_SW:
+		reg |= USBOTGSS_UTMI_OTG_CTRL_SW_MODE;
+		break;
+	case DWC3_OMAP_UTMI_MODE_HW:
+		reg &= ~USBOTGSS_UTMI_OTG_CTRL_SW_MODE;
+		break;
+	default:
+		dev_WARN(omap->dev, "UNKNOWN utmi mode %d\n", utmi_mode);
+	}
+
+	dwc3_omap_write_utmi_ctrl(omap, reg);
+}
+
+static int dwc3_omap_extcon_register(struct dwc3_omap *omap)
+{
+	int			ret;
+	struct device_node	*node = omap->dev->of_node;
+	struct extcon_dev	*edev;
+
+	if (of_property_read_bool(node, "extcon")) {
+		edev = extcon_get_edev_by_phandle(omap->dev, 0);
+		if (IS_ERR(edev)) {
+			dev_vdbg(omap->dev, "couldn't get extcon device\n");
+			return -EPROBE_DEFER;
+		}
+
+		omap->vbus_nb.notifier_call = dwc3_omap_vbus_notifier;
+		ret = devm_extcon_register_notifier(omap->dev, edev,
+						EXTCON_USB, &omap->vbus_nb);
+		if (ret < 0)
+			dev_vdbg(omap->dev, "failed to register notifier for USB\n");
+
+		omap->id_nb.notifier_call = dwc3_omap_id_notifier;
+		ret = devm_extcon_register_notifier(omap->dev, edev,
+						EXTCON_USB_HOST, &omap->id_nb);
+		if (ret < 0)
+			dev_vdbg(omap->dev, "failed to register notifier for USB-HOST\n");
+
+		if (extcon_get_state(edev, EXTCON_USB) == true)
+			dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
+		else
+			dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_OFF);
+
+		if (extcon_get_state(edev, EXTCON_USB_HOST) == true)
+			dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
+		else
+			dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_FLOAT);
+
+		omap->edev = edev;
+	}
+
+	return 0;
+}
+
+static int dwc3_omap_probe(struct platform_device *pdev)
+{
+	struct device_node	*node = pdev->dev.of_node;
+
+	struct dwc3_omap	*omap;
+	struct device		*dev = &pdev->dev;
+	struct regulator	*vbus_reg = NULL;
+
+	int			ret;
+	int			irq;
+
+	void __iomem		*base;
+
+	if (!node) {
+		dev_err(dev, "device node not found\n");
+		return -EINVAL;
+	}
+
+	omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
+	if (!omap)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, omap);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	if (of_property_read_bool(node, "vbus-supply")) {
+		vbus_reg = devm_regulator_get(dev, "vbus");
+		if (IS_ERR(vbus_reg)) {
+			dev_err(dev, "vbus init failed\n");
+			return PTR_ERR(vbus_reg);
+		}
+	}
+
+	omap->dev	= dev;
+	omap->irq	= irq;
+	omap->base	= base;
+	omap->vbus_reg	= vbus_reg;
+
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "get_sync failed with err %d\n", ret);
+		goto err1;
+	}
+
+	dwc3_omap_map_offset(omap);
+	dwc3_omap_set_utmi_mode(omap);
+
+	ret = dwc3_omap_extcon_register(omap);
+	if (ret < 0)
+		goto err1;
+
+	ret = of_platform_populate(node, NULL, NULL, dev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to create dwc3 core\n");
+		goto err1;
+	}
+
+	ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt,
+					dwc3_omap_interrupt_thread, IRQF_SHARED,
+					"dwc3-omap", omap);
+	if (ret) {
+		dev_err(dev, "failed to request IRQ #%d --> %d\n",
+			omap->irq, ret);
+		goto err1;
+	}
+	dwc3_omap_enable_irqs(omap);
+	return 0;
+
+err1:
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+
+	return ret;
+}
+
+static int dwc3_omap_remove(struct platform_device *pdev)
+{
+	struct dwc3_omap	*omap = platform_get_drvdata(pdev);
+
+	dwc3_omap_disable_irqs(omap);
+	disable_irq(omap->irq);
+	of_platform_depopulate(omap->dev);
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id of_dwc3_match[] = {
+	{
+		.compatible =	"ti,dwc3"
+	},
+	{
+		.compatible =	"ti,am437x-dwc3"
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_dwc3_match);
+
+#ifdef CONFIG_PM_SLEEP
+static int dwc3_omap_suspend(struct device *dev)
+{
+	struct dwc3_omap	*omap = dev_get_drvdata(dev);
+
+	omap->utmi_otg_ctrl = dwc3_omap_read_utmi_ctrl(omap);
+	dwc3_omap_disable_irqs(omap);
+
+	return 0;
+}
+
+static int dwc3_omap_resume(struct device *dev)
+{
+	struct dwc3_omap	*omap = dev_get_drvdata(dev);
+
+	dwc3_omap_write_utmi_ctrl(omap, omap->utmi_otg_ctrl);
+	dwc3_omap_enable_irqs(omap);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static void dwc3_omap_complete(struct device *dev)
+{
+	struct dwc3_omap	*omap = dev_get_drvdata(dev);
+
+	if (extcon_get_state(omap->edev, EXTCON_USB))
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
+	else
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_OFF);
+
+	if (extcon_get_state(omap->edev, EXTCON_USB_HOST))
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
+	else
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_FLOAT);
+}
+
+static const struct dev_pm_ops dwc3_omap_dev_pm_ops = {
+
+	SET_SYSTEM_SLEEP_PM_OPS(dwc3_omap_suspend, dwc3_omap_resume)
+	.complete = dwc3_omap_complete,
+};
+
+#define DEV_PM_OPS	(&dwc3_omap_dev_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif /* CONFIG_PM_SLEEP */
+
+static struct platform_driver dwc3_omap_driver = {
+	.probe		= dwc3_omap_probe,
+	.remove		= dwc3_omap_remove,
+	.driver		= {
+		.name	= "omap-dwc3",
+		.of_match_table	= of_dwc3_match,
+		.pm	= DEV_PM_OPS,
+	},
+};
+
+module_platform_driver(dwc3_omap_driver);
+
+MODULE_ALIAS("platform:omap-dwc3");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare USB3 OMAP Glue Layer");
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
new file mode 100644
index 000000000..ae25ee832
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dwc3-pci.c - PCI Specific glue layer
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/workqueue.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+
+#define PCI_DEVICE_ID_INTEL_BYT			0x0f37
+#define PCI_DEVICE_ID_INTEL_MRFLD		0x119e
+#define PCI_DEVICE_ID_INTEL_BSW			0x22b7
+#define PCI_DEVICE_ID_INTEL_SPTLP		0x9d30
+#define PCI_DEVICE_ID_INTEL_SPTH		0xa130
+#define PCI_DEVICE_ID_INTEL_BXT			0x0aaa
+#define PCI_DEVICE_ID_INTEL_BXT_M		0x1aaa
+#define PCI_DEVICE_ID_INTEL_APL			0x5aaa
+#define PCI_DEVICE_ID_INTEL_KBP			0xa2b0
+#define PCI_DEVICE_ID_INTEL_CMLLP		0x02ee
+#define PCI_DEVICE_ID_INTEL_CMLH		0x06ee
+#define PCI_DEVICE_ID_INTEL_GLK			0x31aa
+#define PCI_DEVICE_ID_INTEL_CNPLP		0x9dee
+#define PCI_DEVICE_ID_INTEL_CNPH		0xa36e
+#define PCI_DEVICE_ID_INTEL_CNPV		0xa3b0
+#define PCI_DEVICE_ID_INTEL_ICLLP		0x34ee
+#define PCI_DEVICE_ID_INTEL_EHL			0x4b7e
+#define PCI_DEVICE_ID_INTEL_TGPLP		0xa0ee
+#define PCI_DEVICE_ID_INTEL_TGPH		0x43ee
+#define PCI_DEVICE_ID_INTEL_JSP			0x4dee
+#define PCI_DEVICE_ID_INTEL_ADL			0x460e
+#define PCI_DEVICE_ID_INTEL_ADL_PCH		0x51ee
+#define PCI_DEVICE_ID_INTEL_ADLN		0x465e
+#define PCI_DEVICE_ID_INTEL_ADLN_PCH		0x54ee
+#define PCI_DEVICE_ID_INTEL_ADLS		0x7ae1
+#define PCI_DEVICE_ID_INTEL_RPL			0xa70e
+#define PCI_DEVICE_ID_INTEL_RPLS		0x7a61
+#define PCI_DEVICE_ID_INTEL_MTLM		0x7eb1
+#define PCI_DEVICE_ID_INTEL_MTLP		0x7ec1
+#define PCI_DEVICE_ID_INTEL_MTLS		0x7f6f
+#define PCI_DEVICE_ID_INTEL_MTL			0x7e7e
+#define PCI_DEVICE_ID_INTEL_TGL			0x9a15
+#define PCI_DEVICE_ID_AMD_MR			0x163a
+
+#define PCI_INTEL_BXT_DSM_GUID		"732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"
+#define PCI_INTEL_BXT_FUNC_PMU_PWR	4
+#define PCI_INTEL_BXT_STATE_D0		0
+#define PCI_INTEL_BXT_STATE_D3		3
+
+#define GP_RWBAR			1
+#define GP_RWREG1			0xa0
+#define GP_RWREG1_ULPI_REFCLK_DISABLE	(1 << 17)
+
+/**
+ * struct dwc3_pci - Driver private structure
+ * @dwc3: child dwc3 platform_device
+ * @pci: our link to PCI bus
+ * @guid: _DSM GUID
+ * @has_dsm_for_pm: true for devices which need to run _DSM on runtime PM
+ * @wakeup_work: work for asynchronous resume
+ */
+struct dwc3_pci {
+	struct platform_device *dwc3;
+	struct pci_dev *pci;
+
+	guid_t guid;
+
+	unsigned int has_dsm_for_pm:1;
+	struct work_struct wakeup_work;
+};
+
+static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
+static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
+	{ "reset-gpios", &reset_gpios, 1 },
+	{ "cs-gpios", &cs_gpios, 1 },
+	{ },
+};
+
+static struct gpiod_lookup_table platform_bytcr_gpios = {
+	.dev_id		= "0000:00:16.0",
+	.table		= {
+		GPIO_LOOKUP("INT33FC:00", 54, "cs", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("INT33FC:02", 14, "reset", GPIO_ACTIVE_HIGH),
+		{}
+	},
+};
+
+static int dwc3_byt_enable_ulpi_refclock(struct pci_dev *pci)
+{
+	void __iomem	*reg;
+	u32		value;
+
+	reg = pcim_iomap(pci, GP_RWBAR, 0);
+	if (!reg)
+		return -ENOMEM;
+
+	value = readl(reg + GP_RWREG1);
+	if (!(value & GP_RWREG1_ULPI_REFCLK_DISABLE))
+		goto unmap; /* ULPI refclk already enabled */
+
+	value &= ~GP_RWREG1_ULPI_REFCLK_DISABLE;
+	writel(value, reg + GP_RWREG1);
+	/* This comes from the Intel Android x86 tree w/o any explanation */
+	msleep(100);
+unmap:
+	pcim_iounmap(pci, reg);
+	return 0;
+}
+
+static const struct property_entry dwc3_pci_intel_properties[] = {
+	PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
+	PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
+	{}
+};
+
+static const struct property_entry dwc3_pci_intel_phy_charger_detect_properties[] = {
+	PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
+	PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
+	PROPERTY_ENTRY_BOOL("linux,phy_charger_detect"),
+	PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
+	{}
+};
+
+static const struct property_entry dwc3_pci_intel_byt_properties[] = {
+	PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
+	PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
+	PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
+	{}
+};
+
+static const struct property_entry dwc3_pci_mrfld_properties[] = {
+	PROPERTY_ENTRY_STRING("dr_mode", "otg"),
+	PROPERTY_ENTRY_STRING("linux,extcon-name", "mrfld_bcove_pwrsrc"),
+	PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
+	PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
+	PROPERTY_ENTRY_BOOL("snps,usb2-gadget-lpm-disable"),
+	PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
+	{}
+};
+
+static const struct property_entry dwc3_pci_amd_properties[] = {
+	PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
+	PROPERTY_ENTRY_U8("snps,lpm-nyet-threshold", 0xf),
+	PROPERTY_ENTRY_BOOL("snps,u2exit_lfps_quirk"),
+	PROPERTY_ENTRY_BOOL("snps,u2ss_inp3_quirk"),
+	PROPERTY_ENTRY_BOOL("snps,req_p1p2p3_quirk"),
+	PROPERTY_ENTRY_BOOL("snps,del_p1p2p3_quirk"),
+	PROPERTY_ENTRY_BOOL("snps,del_phy_power_chg_quirk"),
+	PROPERTY_ENTRY_BOOL("snps,lfps_filter_quirk"),
+	PROPERTY_ENTRY_BOOL("snps,rx_detect_poll_quirk"),
+	PROPERTY_ENTRY_BOOL("snps,tx_de_emphasis_quirk"),
+	PROPERTY_ENTRY_U8("snps,tx_de_emphasis", 1),
+	/* FIXME these quirks should be removed when AMD NL tapes out */
+	PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
+	PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
+	PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
+	PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
+	{}
+};
+
+static const struct property_entry dwc3_pci_mr_properties[] = {
+	PROPERTY_ENTRY_STRING("dr_mode", "otg"),
+	PROPERTY_ENTRY_BOOL("usb-role-switch"),
+	PROPERTY_ENTRY_STRING("role-switch-default-mode", "host"),
+	PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
+	{}
+};
+
+static const struct software_node dwc3_pci_intel_swnode = {
+	.properties = dwc3_pci_intel_properties,
+};
+
+static const struct software_node dwc3_pci_intel_phy_charger_detect_swnode = {
+	.properties = dwc3_pci_intel_phy_charger_detect_properties,
+};
+
+static const struct software_node dwc3_pci_intel_byt_swnode = {
+	.properties = dwc3_pci_intel_byt_properties,
+};
+
+static const struct software_node dwc3_pci_intel_mrfld_swnode = {
+	.properties = dwc3_pci_mrfld_properties,
+};
+
+static const struct software_node dwc3_pci_amd_swnode = {
+	.properties = dwc3_pci_amd_properties,
+};
+
+static const struct software_node dwc3_pci_amd_mr_swnode = {
+	.properties = dwc3_pci_mr_properties,
+};
+
+static int dwc3_pci_quirks(struct dwc3_pci *dwc,
+			   const struct software_node *swnode)
+{
+	struct pci_dev			*pdev = dwc->pci;
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
+		if (pdev->device == PCI_DEVICE_ID_INTEL_BXT ||
+		    pdev->device == PCI_DEVICE_ID_INTEL_BXT_M ||
+		    pdev->device == PCI_DEVICE_ID_INTEL_EHL) {
+			guid_parse(PCI_INTEL_BXT_DSM_GUID, &dwc->guid);
+			dwc->has_dsm_for_pm = true;
+		}
+
+		if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
+			struct gpio_desc *gpio;
+			int ret;
+
+			/* On BYT the FW does not always enable the refclock */
+			ret = dwc3_byt_enable_ulpi_refclock(pdev);
+			if (ret)
+				return ret;
+
+			ret = devm_acpi_dev_add_driver_gpios(&pdev->dev,
+					acpi_dwc3_byt_gpios);
+			if (ret)
+				dev_dbg(&pdev->dev, "failed to add mapping table\n");
+
+			/*
+			 * A lot of BYT devices lack ACPI resource entries for
+			 * the GPIOs. If the ACPI entry for the GPIO controller
+			 * is present add a fallback mapping to the reference
+			 * design GPIOs which all boards seem to use.
+			 */
+			if (acpi_dev_present("INT33FC", NULL, -1))
+				gpiod_add_lookup_table(&platform_bytcr_gpios);
+
+			/*
+			 * These GPIOs will turn on the USB2 PHY. Note that we have to
+			 * put the gpio descriptors again here because the phy driver
+			 * might want to grab them, too.
+			 */
+			gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
+			if (IS_ERR(gpio))
+				return PTR_ERR(gpio);
+
+			gpiod_set_value_cansleep(gpio, 1);
+			gpiod_put(gpio);
+
+			gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
+			if (IS_ERR(gpio))
+				return PTR_ERR(gpio);
+
+			if (gpio) {
+				gpiod_set_value_cansleep(gpio, 1);
+				gpiod_put(gpio);
+				usleep_range(10000, 11000);
+			}
+
+			/*
+			 * Make the pdev name predictable (only 1 DWC3 on BYT)
+			 * and patch the phy dev-name into the lookup table so
+			 * that the phy-driver can get the GPIOs.
+			 */
+			dwc->dwc3->id = PLATFORM_DEVID_NONE;
+			platform_bytcr_gpios.dev_id = "dwc3.ulpi";
+
+			/*
+			 * Some Android tablets with a Crystal Cove PMIC
+			 * (INT33FD), rely on the TUSB1211 phy for charger
+			 * detection. These can be identified by them _not_
+			 * using the standard ACPI battery and ac drivers.
+			 */
+			if (acpi_dev_present("INT33FD", "1", 2) &&
+			    acpi_quirk_skip_acpi_ac_and_battery()) {
+				dev_info(&pdev->dev, "Using TUSB1211 phy for charger detection\n");
+				swnode = &dwc3_pci_intel_phy_charger_detect_swnode;
+			}
+		}
+	}
+
+	return device_add_software_node(&dwc->dwc3->dev, swnode);
+}
+
+#ifdef CONFIG_PM
+static void dwc3_pci_resume_work(struct work_struct *work)
+{
+	struct dwc3_pci *dwc = container_of(work, struct dwc3_pci, wakeup_work);
+	struct platform_device *dwc3 = dwc->dwc3;
+	int ret;
+
+	ret = pm_runtime_get_sync(&dwc3->dev);
+	if (ret < 0) {
+		pm_runtime_put_sync_autosuspend(&dwc3->dev);
+		return;
+	}
+
+	pm_runtime_mark_last_busy(&dwc3->dev);
+	pm_runtime_put_sync_autosuspend(&dwc3->dev);
+}
+#endif
+
+static int dwc3_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)
+{
+	struct dwc3_pci		*dwc;
+	struct resource		res[2];
+	int			ret;
+	struct device		*dev = &pci->dev;
+
+	ret = pcim_enable_device(pci);
+	if (ret) {
+		dev_err(dev, "failed to enable pci device\n");
+		return -ENODEV;
+	}
+
+	pci_set_master(pci);
+
+	dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL);
+	if (!dwc)
+		return -ENOMEM;
+
+	dwc->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
+	if (!dwc->dwc3)
+		return -ENOMEM;
+
+	memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
+
+	res[0].start	= pci_resource_start(pci, 0);
+	res[0].end	= pci_resource_end(pci, 0);
+	res[0].name	= "dwc_usb3";
+	res[0].flags	= IORESOURCE_MEM;
+
+	res[1].start	= pci->irq;
+	res[1].name	= "dwc_usb3";
+	res[1].flags	= IORESOURCE_IRQ;
+
+	ret = platform_device_add_resources(dwc->dwc3, res, ARRAY_SIZE(res));
+	if (ret) {
+		dev_err(dev, "couldn't add resources to dwc3 device\n");
+		goto err;
+	}
+
+	dwc->pci = pci;
+	dwc->dwc3->dev.parent = dev;
+	ACPI_COMPANION_SET(&dwc->dwc3->dev, ACPI_COMPANION(dev));
+
+	ret = dwc3_pci_quirks(dwc, (void *)id->driver_data);
+	if (ret)
+		goto err;
+
+	ret = platform_device_add(dwc->dwc3);
+	if (ret) {
+		dev_err(dev, "failed to register dwc3 device\n");
+		goto err;
+	}
+
+	device_init_wakeup(dev, true);
+	pci_set_drvdata(pci, dwc);
+	pm_runtime_put(dev);
+#ifdef CONFIG_PM
+	INIT_WORK(&dwc->wakeup_work, dwc3_pci_resume_work);
+#endif
+
+	return 0;
+err:
+	device_remove_software_node(&dwc->dwc3->dev);
+	platform_device_put(dwc->dwc3);
+	return ret;
+}
+
+static void dwc3_pci_remove(struct pci_dev *pci)
+{
+	struct dwc3_pci		*dwc = pci_get_drvdata(pci);
+	struct pci_dev		*pdev = dwc->pci;
+
+	if (pdev->device == PCI_DEVICE_ID_INTEL_BYT)
+		gpiod_remove_lookup_table(&platform_bytcr_gpios);
+#ifdef CONFIG_PM
+	cancel_work_sync(&dwc->wakeup_work);
+#endif
+	device_init_wakeup(&pci->dev, false);
+	pm_runtime_get(&pci->dev);
+	device_remove_software_node(&dwc->dwc3->dev);
+	platform_device_unregister(dwc->dwc3);
+}
+
+static const struct pci_device_id dwc3_pci_id_table[] = {
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BSW),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BYT),
+	  (kernel_ulong_t) &dwc3_pci_intel_byt_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD),
+	  (kernel_ulong_t) &dwc3_pci_intel_mrfld_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CMLLP),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CMLH),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SPTLP),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SPTH),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BXT),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BXT_M),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_APL),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_KBP),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_GLK),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CNPLP),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CNPH),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CNPV),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICLLP),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_EHL),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPLP),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPH),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_JSP),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADL),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADL_PCH),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLN),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLN_PCH),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLS),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_RPL),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_RPLS),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTLM),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTLP),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTLS),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTL),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGL),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB),
+	  (kernel_ulong_t) &dwc3_pci_amd_swnode, },
+
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_MR),
+	  (kernel_ulong_t)&dwc3_pci_amd_mr_swnode, },
+
+	{  }	/* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
+
+#if defined(CONFIG_PM) || defined(CONFIG_PM_SLEEP)
+static int dwc3_pci_dsm(struct dwc3_pci *dwc, int param)
+{
+	union acpi_object *obj;
+	union acpi_object tmp;
+	union acpi_object argv4 = ACPI_INIT_DSM_ARGV4(1, &tmp);
+
+	if (!dwc->has_dsm_for_pm)
+		return 0;
+
+	tmp.type = ACPI_TYPE_INTEGER;
+	tmp.integer.value = param;
+
+	obj = acpi_evaluate_dsm(ACPI_HANDLE(&dwc->pci->dev), &dwc->guid,
+			1, PCI_INTEL_BXT_FUNC_PMU_PWR, &argv4);
+	if (!obj) {
+		dev_err(&dwc->pci->dev, "failed to evaluate _DSM\n");
+		return -EIO;
+	}
+
+	ACPI_FREE(obj);
+
+	return 0;
+}
+#endif /* CONFIG_PM || CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM
+static int dwc3_pci_runtime_suspend(struct device *dev)
+{
+	struct dwc3_pci		*dwc = dev_get_drvdata(dev);
+
+	if (device_can_wakeup(dev))
+		return dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D3);
+
+	return -EBUSY;
+}
+
+static int dwc3_pci_runtime_resume(struct device *dev)
+{
+	struct dwc3_pci		*dwc = dev_get_drvdata(dev);
+	int			ret;
+
+	ret = dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D0);
+	if (ret)
+		return ret;
+
+	queue_work(pm_wq, &dwc->wakeup_work);
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_PM_SLEEP
+static int dwc3_pci_suspend(struct device *dev)
+{
+	struct dwc3_pci		*dwc = dev_get_drvdata(dev);
+
+	return dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D3);
+}
+
+static int dwc3_pci_resume(struct device *dev)
+{
+	struct dwc3_pci		*dwc = dev_get_drvdata(dev);
+
+	return dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D0);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops dwc3_pci_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwc3_pci_suspend, dwc3_pci_resume)
+	SET_RUNTIME_PM_OPS(dwc3_pci_runtime_suspend, dwc3_pci_runtime_resume,
+		NULL)
+};
+
+static struct pci_driver dwc3_pci_driver = {
+	.name		= "dwc3-pci",
+	.id_table	= dwc3_pci_id_table,
+	.probe		= dwc3_pci_probe,
+	.remove		= dwc3_pci_remove,
+	.driver		= {
+		.pm	= &dwc3_pci_dev_pm_ops,
+	}
+};
+
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");
+
+module_pci_driver(dwc3_pci_driver);
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
new file mode 100644
index 000000000..93747ab2c
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -0,0 +1,1110 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ *
+ * Inspired by dwc3-of-simple.c
+ */
+
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/of_clk.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/extcon.h>
+#include <linux/interconnect.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/usb/of.h>
+#include <linux/reset.h>
+#include <linux/iopoll.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb.h>
+#include "core.h"
+
+/* USB QSCRATCH Hardware registers */
+#define QSCRATCH_HS_PHY_CTRL			0x10
+#define UTMI_OTG_VBUS_VALID			BIT(20)
+#define SW_SESSVLD_SEL				BIT(28)
+
+#define QSCRATCH_SS_PHY_CTRL			0x30
+#define LANE0_PWR_PRESENT			BIT(24)
+
+#define QSCRATCH_GENERAL_CFG			0x08
+#define PIPE_UTMI_CLK_SEL			BIT(0)
+#define PIPE3_PHYSTATUS_SW			BIT(3)
+#define PIPE_UTMI_CLK_DIS			BIT(8)
+
+#define PWR_EVNT_IRQ_STAT_REG			0x58
+#define PWR_EVNT_LPM_IN_L2_MASK			BIT(4)
+#define PWR_EVNT_LPM_OUT_L2_MASK		BIT(5)
+
+#define SDM845_QSCRATCH_BASE_OFFSET		0xf8800
+#define SDM845_QSCRATCH_SIZE			0x400
+#define SDM845_DWC3_CORE_SIZE			0xcd00
+
+/* Interconnect path bandwidths in MBps */
+#define USB_MEMORY_AVG_HS_BW MBps_to_icc(240)
+#define USB_MEMORY_PEAK_HS_BW MBps_to_icc(700)
+#define USB_MEMORY_AVG_SS_BW  MBps_to_icc(1000)
+#define USB_MEMORY_PEAK_SS_BW MBps_to_icc(2500)
+#define APPS_USB_AVG_BW 0
+#define APPS_USB_PEAK_BW MBps_to_icc(40)
+
+struct dwc3_acpi_pdata {
+	u32			qscratch_base_offset;
+	u32			qscratch_base_size;
+	u32			dwc3_core_base_size;
+	int			hs_phy_irq_index;
+	int			dp_hs_phy_irq_index;
+	int			dm_hs_phy_irq_index;
+	int			ss_phy_irq_index;
+	bool			is_urs;
+};
+
+struct dwc3_qcom {
+	struct device		*dev;
+	void __iomem		*qscratch_base;
+	struct platform_device	*dwc3;
+	struct platform_device	*urs_usb;
+	struct clk		**clks;
+	int			num_clocks;
+	struct reset_control	*resets;
+
+	int			hs_phy_irq;
+	int			dp_hs_phy_irq;
+	int			dm_hs_phy_irq;
+	int			ss_phy_irq;
+	enum usb_device_speed	usb2_speed;
+
+	struct extcon_dev	*edev;
+	struct extcon_dev	*host_edev;
+	struct notifier_block	vbus_nb;
+	struct notifier_block	host_nb;
+
+	const struct dwc3_acpi_pdata *acpi_pdata;
+
+	enum usb_dr_mode	mode;
+	bool			is_suspended;
+	bool			pm_suspended;
+	struct icc_path		*icc_path_ddr;
+	struct icc_path		*icc_path_apps;
+};
+
+static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
+{
+	u32 reg;
+
+	reg = readl(base + offset);
+	reg |= val;
+	writel(reg, base + offset);
+
+	/* ensure that above write is through */
+	readl(base + offset);
+}
+
+static inline void dwc3_qcom_clrbits(void __iomem *base, u32 offset, u32 val)
+{
+	u32 reg;
+
+	reg = readl(base + offset);
+	reg &= ~val;
+	writel(reg, base + offset);
+
+	/* ensure that above write is through */
+	readl(base + offset);
+}
+
+static void dwc3_qcom_vbus_override_enable(struct dwc3_qcom *qcom, bool enable)
+{
+	if (enable) {
+		dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL,
+				  LANE0_PWR_PRESENT);
+		dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL,
+				  UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL);
+	} else {
+		dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL,
+				  LANE0_PWR_PRESENT);
+		dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL,
+				  UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL);
+	}
+}
+
+static int dwc3_qcom_vbus_notifier(struct notifier_block *nb,
+				   unsigned long event, void *ptr)
+{
+	struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, vbus_nb);
+
+	/* enable vbus override for device mode */
+	dwc3_qcom_vbus_override_enable(qcom, event);
+	qcom->mode = event ? USB_DR_MODE_PERIPHERAL : USB_DR_MODE_HOST;
+
+	return NOTIFY_DONE;
+}
+
+static int dwc3_qcom_host_notifier(struct notifier_block *nb,
+				   unsigned long event, void *ptr)
+{
+	struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, host_nb);
+
+	/* disable vbus override in host mode */
+	dwc3_qcom_vbus_override_enable(qcom, !event);
+	qcom->mode = event ? USB_DR_MODE_HOST : USB_DR_MODE_PERIPHERAL;
+
+	return NOTIFY_DONE;
+}
+
+static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom)
+{
+	struct device		*dev = qcom->dev;
+	struct extcon_dev	*host_edev;
+	int			ret;
+
+	if (!of_property_read_bool(dev->of_node, "extcon"))
+		return 0;
+
+	qcom->edev = extcon_get_edev_by_phandle(dev, 0);
+	if (IS_ERR(qcom->edev))
+		return PTR_ERR(qcom->edev);
+
+	qcom->vbus_nb.notifier_call = dwc3_qcom_vbus_notifier;
+
+	qcom->host_edev = extcon_get_edev_by_phandle(dev, 1);
+	if (IS_ERR(qcom->host_edev))
+		qcom->host_edev = NULL;
+
+	ret = devm_extcon_register_notifier(dev, qcom->edev, EXTCON_USB,
+					    &qcom->vbus_nb);
+	if (ret < 0) {
+		dev_err(dev, "VBUS notifier register failed\n");
+		return ret;
+	}
+
+	if (qcom->host_edev)
+		host_edev = qcom->host_edev;
+	else
+		host_edev = qcom->edev;
+
+	qcom->host_nb.notifier_call = dwc3_qcom_host_notifier;
+	ret = devm_extcon_register_notifier(dev, host_edev, EXTCON_USB_HOST,
+					    &qcom->host_nb);
+	if (ret < 0) {
+		dev_err(dev, "Host notifier register failed\n");
+		return ret;
+	}
+
+	/* Update initial VBUS override based on extcon state */
+	if (extcon_get_state(qcom->edev, EXTCON_USB) ||
+	    !extcon_get_state(host_edev, EXTCON_USB_HOST))
+		dwc3_qcom_vbus_notifier(&qcom->vbus_nb, true, qcom->edev);
+	else
+		dwc3_qcom_vbus_notifier(&qcom->vbus_nb, false, qcom->edev);
+
+	return 0;
+}
+
+static int dwc3_qcom_interconnect_enable(struct dwc3_qcom *qcom)
+{
+	int ret;
+
+	ret = icc_enable(qcom->icc_path_ddr);
+	if (ret)
+		return ret;
+
+	ret = icc_enable(qcom->icc_path_apps);
+	if (ret)
+		icc_disable(qcom->icc_path_ddr);
+
+	return ret;
+}
+
+static int dwc3_qcom_interconnect_disable(struct dwc3_qcom *qcom)
+{
+	int ret;
+
+	ret = icc_disable(qcom->icc_path_ddr);
+	if (ret)
+		return ret;
+
+	ret = icc_disable(qcom->icc_path_apps);
+	if (ret)
+		icc_enable(qcom->icc_path_ddr);
+
+	return ret;
+}
+
+/**
+ * dwc3_qcom_interconnect_init() - Get interconnect path handles
+ * and set bandwidth.
+ * @qcom:			Pointer to the concerned usb core.
+ *
+ */
+static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
+{
+	enum usb_device_speed max_speed;
+	struct device *dev = qcom->dev;
+	int ret;
+
+	if (has_acpi_companion(dev))
+		return 0;
+
+	qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr");
+	if (IS_ERR(qcom->icc_path_ddr)) {
+		dev_err(dev, "failed to get usb-ddr path: %ld\n",
+				PTR_ERR(qcom->icc_path_ddr));
+		return PTR_ERR(qcom->icc_path_ddr);
+	}
+
+	qcom->icc_path_apps = of_icc_get(dev, "apps-usb");
+	if (IS_ERR(qcom->icc_path_apps)) {
+		dev_err(dev, "failed to get apps-usb path: %ld\n",
+				PTR_ERR(qcom->icc_path_apps));
+		ret = PTR_ERR(qcom->icc_path_apps);
+		goto put_path_ddr;
+	}
+
+	max_speed = usb_get_maximum_speed(&qcom->dwc3->dev);
+	if (max_speed >= USB_SPEED_SUPER || max_speed == USB_SPEED_UNKNOWN) {
+		ret = icc_set_bw(qcom->icc_path_ddr,
+				USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW);
+	} else {
+		ret = icc_set_bw(qcom->icc_path_ddr,
+				USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW);
+	}
+	if (ret) {
+		dev_err(dev, "failed to set bandwidth for usb-ddr path: %d\n", ret);
+		goto put_path_apps;
+	}
+
+	ret = icc_set_bw(qcom->icc_path_apps, APPS_USB_AVG_BW, APPS_USB_PEAK_BW);
+	if (ret) {
+		dev_err(dev, "failed to set bandwidth for apps-usb path: %d\n", ret);
+		goto put_path_apps;
+	}
+
+	return 0;
+
+put_path_apps:
+	icc_put(qcom->icc_path_apps);
+put_path_ddr:
+	icc_put(qcom->icc_path_ddr);
+	return ret;
+}
+
+/**
+ * dwc3_qcom_interconnect_exit() - Release interconnect path handles
+ * @qcom:			Pointer to the concerned usb core.
+ *
+ * This function is used to release interconnect path handle.
+ */
+static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom)
+{
+	icc_put(qcom->icc_path_ddr);
+	icc_put(qcom->icc_path_apps);
+}
+
+/* Only usable in contexts where the role can not change. */
+static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom)
+{
+	struct dwc3 *dwc;
+
+	/*
+	 * FIXME: Fix this layering violation.
+	 */
+	dwc = platform_get_drvdata(qcom->dwc3);
+
+	/* Core driver may not have probed yet. */
+	if (!dwc)
+		return false;
+
+	return dwc->xhci;
+}
+
+static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
+{
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
+	struct usb_device *udev;
+	struct usb_hcd __maybe_unused *hcd;
+
+	/*
+	 * FIXME: Fix this layering violation.
+	 */
+	hcd = platform_get_drvdata(dwc->xhci);
+
+	/*
+	 * It is possible to query the speed of all children of
+	 * USB2.0 root hub via usb_hub_for_each_child(). DWC3 code
+	 * currently supports only 1 port per controller. So
+	 * this is sufficient.
+	 */
+#ifdef CONFIG_USB
+	udev = usb_hub_find_child(hcd->self.root_hub, 1);
+#else
+	udev = NULL;
+#endif
+	if (!udev)
+		return USB_SPEED_UNKNOWN;
+
+	return udev->speed;
+}
+
+static void dwc3_qcom_enable_wakeup_irq(int irq, unsigned int polarity)
+{
+	if (!irq)
+		return;
+
+	if (polarity)
+		irq_set_irq_type(irq, polarity);
+
+	enable_irq(irq);
+	enable_irq_wake(irq);
+}
+
+static void dwc3_qcom_disable_wakeup_irq(int irq)
+{
+	if (!irq)
+		return;
+
+	disable_irq_wake(irq);
+	disable_irq_nosync(irq);
+}
+
+static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
+{
+	dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
+
+	if (qcom->usb2_speed == USB_SPEED_LOW) {
+		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
+			(qcom->usb2_speed == USB_SPEED_FULL)) {
+		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+	} else {
+		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+	}
+
+	dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq);
+}
+
+static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
+{
+	dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq, 0);
+
+	/*
+	 * Configure DP/DM line interrupts based on the USB2 device attached to
+	 * the root hub port. When HS/FS device is connected, configure the DP line
+	 * as falling edge to detect both disconnect and remote wakeup scenarios. When
+	 * LS device is connected, configure DM line as falling edge to detect both
+	 * disconnect and remote wakeup. When no device is connected, configure both
+	 * DP and DM lines as rising edge to detect HS/HS/LS device connect scenario.
+	 */
+
+	if (qcom->usb2_speed == USB_SPEED_LOW) {
+		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
+						IRQ_TYPE_EDGE_FALLING);
+	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
+			(qcom->usb2_speed == USB_SPEED_FULL)) {
+		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
+						IRQ_TYPE_EDGE_FALLING);
+	} else {
+		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
+						IRQ_TYPE_EDGE_RISING);
+		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
+						IRQ_TYPE_EDGE_RISING);
+	}
+
+	dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq, 0);
+}
+
+static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
+{
+	u32 val;
+	int i, ret;
+
+	if (qcom->is_suspended)
+		return 0;
+
+	val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
+	if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
+		dev_err(qcom->dev, "HS-PHY not in L2\n");
+
+	for (i = qcom->num_clocks - 1; i >= 0; i--)
+		clk_disable_unprepare(qcom->clks[i]);
+
+	ret = dwc3_qcom_interconnect_disable(qcom);
+	if (ret)
+		dev_warn(qcom->dev, "failed to disable interconnect: %d\n", ret);
+
+	/*
+	 * The role is stable during suspend as role switching is done from a
+	 * freezable workqueue.
+	 */
+	if (dwc3_qcom_is_host(qcom) && wakeup) {
+		qcom->usb2_speed = dwc3_qcom_read_usb2_speed(qcom);
+		dwc3_qcom_enable_interrupts(qcom);
+	}
+
+	qcom->is_suspended = true;
+
+	return 0;
+}
+
+static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
+{
+	int ret;
+	int i;
+
+	if (!qcom->is_suspended)
+		return 0;
+
+	if (dwc3_qcom_is_host(qcom) && wakeup)
+		dwc3_qcom_disable_interrupts(qcom);
+
+	for (i = 0; i < qcom->num_clocks; i++) {
+		ret = clk_prepare_enable(qcom->clks[i]);
+		if (ret < 0) {
+			while (--i >= 0)
+				clk_disable_unprepare(qcom->clks[i]);
+			return ret;
+		}
+	}
+
+	ret = dwc3_qcom_interconnect_enable(qcom);
+	if (ret)
+		dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
+
+	/* Clear existing events from PHY related to L2 in/out */
+	dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
+			  PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
+
+	qcom->is_suspended = false;
+
+	return 0;
+}
+
+static irqreturn_t qcom_dwc3_resume_irq(int irq, void *data)
+{
+	struct dwc3_qcom *qcom = data;
+	struct dwc3	*dwc = platform_get_drvdata(qcom->dwc3);
+
+	/* If pm_suspended then let pm_resume take care of resuming h/w */
+	if (qcom->pm_suspended)
+		return IRQ_HANDLED;
+
+	/*
+	 * This is safe as role switching is done from a freezable workqueue
+	 * and the wakeup interrupts are disabled as part of resume.
+	 */
+	if (dwc3_qcom_is_host(qcom))
+		pm_runtime_resume(&dwc->xhci->dev);
+
+	return IRQ_HANDLED;
+}
+
+static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom)
+{
+	/* Configure dwc3 to use UTMI clock as PIPE clock not present */
+	dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
+			  PIPE_UTMI_CLK_DIS);
+
+	usleep_range(100, 1000);
+
+	dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
+			  PIPE_UTMI_CLK_SEL | PIPE3_PHYSTATUS_SW);
+
+	usleep_range(100, 1000);
+
+	dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
+			  PIPE_UTMI_CLK_DIS);
+}
+
+static int dwc3_qcom_get_irq(struct platform_device *pdev,
+			     const char *name, int num)
+{
+	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+	struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb : pdev;
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	if (np)
+		ret = platform_get_irq_byname_optional(pdev_irq, name);
+	else
+		ret = platform_get_irq_optional(pdev_irq, num);
+
+	return ret;
+}
+
+static int dwc3_qcom_setup_irq(struct platform_device *pdev)
+{
+	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+	const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata;
+	int irq;
+	int ret;
+
+	irq = dwc3_qcom_get_irq(pdev, "hs_phy_irq",
+				pdata ? pdata->hs_phy_irq_index : -1);
+	if (irq > 0) {
+		/* Keep wakeup interrupts disabled until suspend */
+		irq_set_status_flags(irq, IRQ_NOAUTOEN);
+		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+					qcom_dwc3_resume_irq,
+					IRQF_ONESHOT,
+					"qcom_dwc3 HS", qcom);
+		if (ret) {
+			dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret);
+			return ret;
+		}
+		qcom->hs_phy_irq = irq;
+	}
+
+	irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq",
+				pdata ? pdata->dp_hs_phy_irq_index : -1);
+	if (irq > 0) {
+		irq_set_status_flags(irq, IRQ_NOAUTOEN);
+		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+					qcom_dwc3_resume_irq,
+					IRQF_ONESHOT,
+					"qcom_dwc3 DP_HS", qcom);
+		if (ret) {
+			dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
+			return ret;
+		}
+		qcom->dp_hs_phy_irq = irq;
+	}
+
+	irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq",
+				pdata ? pdata->dm_hs_phy_irq_index : -1);
+	if (irq > 0) {
+		irq_set_status_flags(irq, IRQ_NOAUTOEN);
+		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+					qcom_dwc3_resume_irq,
+					IRQF_ONESHOT,
+					"qcom_dwc3 DM_HS", qcom);
+		if (ret) {
+			dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
+			return ret;
+		}
+		qcom->dm_hs_phy_irq = irq;
+	}
+
+	irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq",
+				pdata ? pdata->ss_phy_irq_index : -1);
+	if (irq > 0) {
+		irq_set_status_flags(irq, IRQ_NOAUTOEN);
+		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+					qcom_dwc3_resume_irq,
+					IRQF_ONESHOT,
+					"qcom_dwc3 SS", qcom);
+		if (ret) {
+			dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);
+			return ret;
+		}
+		qcom->ss_phy_irq = irq;
+	}
+
+	return 0;
+}
+
+static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
+{
+	struct device		*dev = qcom->dev;
+	struct device_node	*np = dev->of_node;
+	int			i;
+
+	if (!np || !count)
+		return 0;
+
+	if (count < 0)
+		return count;
+
+	qcom->num_clocks = count;
+
+	qcom->clks = devm_kcalloc(dev, qcom->num_clocks,
+				  sizeof(struct clk *), GFP_KERNEL);
+	if (!qcom->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < qcom->num_clocks; i++) {
+		struct clk	*clk;
+		int		ret;
+
+		clk = of_clk_get(np, i);
+		if (IS_ERR(clk)) {
+			while (--i >= 0)
+				clk_put(qcom->clks[i]);
+			return PTR_ERR(clk);
+		}
+
+		ret = clk_prepare_enable(clk);
+		if (ret < 0) {
+			while (--i >= 0) {
+				clk_disable_unprepare(qcom->clks[i]);
+				clk_put(qcom->clks[i]);
+			}
+			clk_put(clk);
+
+			return ret;
+		}
+
+		qcom->clks[i] = clk;
+	}
+
+	return 0;
+}
+
+static const struct property_entry dwc3_qcom_acpi_properties[] = {
+	PROPERTY_ENTRY_STRING("dr_mode", "host"),
+	{}
+};
+
+static const struct software_node dwc3_qcom_swnode = {
+	.properties = dwc3_qcom_acpi_properties,
+};
+
+static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
+{
+	struct dwc3_qcom	*qcom = platform_get_drvdata(pdev);
+	struct device		*dev = &pdev->dev;
+	struct resource		*res, *child_res = NULL;
+	struct platform_device	*pdev_irq = qcom->urs_usb ? qcom->urs_usb :
+							    pdev;
+	int			irq;
+	int			ret;
+
+	qcom->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
+	if (!qcom->dwc3)
+		return -ENOMEM;
+
+	qcom->dwc3->dev.parent = dev;
+	qcom->dwc3->dev.type = dev->type;
+	qcom->dwc3->dev.dma_mask = dev->dma_mask;
+	qcom->dwc3->dev.dma_parms = dev->dma_parms;
+	qcom->dwc3->dev.coherent_dma_mask = dev->coherent_dma_mask;
+
+	child_res = kcalloc(2, sizeof(*child_res), GFP_KERNEL);
+	if (!child_res) {
+		platform_device_put(qcom->dwc3);
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get memory resource\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	child_res[0].flags = res->flags;
+	child_res[0].start = res->start;
+	child_res[0].end = child_res[0].start +
+		qcom->acpi_pdata->dwc3_core_base_size;
+
+	irq = platform_get_irq(pdev_irq, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto out;
+	}
+	child_res[1].flags = IORESOURCE_IRQ;
+	child_res[1].start = child_res[1].end = irq;
+
+	ret = platform_device_add_resources(qcom->dwc3, child_res, 2);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto out;
+	}
+
+	ret = device_add_software_node(&qcom->dwc3->dev, &dwc3_qcom_swnode);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add properties\n");
+		goto out;
+	}
+
+	ret = platform_device_add(qcom->dwc3);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add device\n");
+		device_remove_software_node(&qcom->dwc3->dev);
+		goto out;
+	}
+	kfree(child_res);
+	return 0;
+
+out:
+	platform_device_put(qcom->dwc3);
+	kfree(child_res);
+	return ret;
+}
+
+static int dwc3_qcom_of_register_core(struct platform_device *pdev)
+{
+	struct dwc3_qcom	*qcom = platform_get_drvdata(pdev);
+	struct device_node	*np = pdev->dev.of_node, *dwc3_np;
+	struct device		*dev = &pdev->dev;
+	int			ret;
+
+	dwc3_np = of_get_compatible_child(np, "snps,dwc3");
+	if (!dwc3_np) {
+		dev_err(dev, "failed to find dwc3 core child\n");
+		return -ENODEV;
+	}
+
+	ret = of_platform_populate(np, NULL, NULL, dev);
+	if (ret) {
+		dev_err(dev, "failed to register dwc3 core - %d\n", ret);
+		goto node_put;
+	}
+
+	qcom->dwc3 = of_find_device_by_node(dwc3_np);
+	if (!qcom->dwc3) {
+		ret = -ENODEV;
+		dev_err(dev, "failed to get dwc3 platform device\n");
+		of_platform_depopulate(dev);
+	}
+
+node_put:
+	of_node_put(dwc3_np);
+
+	return ret;
+}
+
+static struct platform_device *dwc3_qcom_create_urs_usb_platdev(struct device *dev)
+{
+	struct platform_device *urs_usb = NULL;
+	struct fwnode_handle *fwh;
+	struct acpi_device *adev;
+	char name[8];
+	int ret;
+	int id;
+
+	/* Figure out device id */
+	ret = sscanf(fwnode_get_name(dev->fwnode), "URS%d", &id);
+	if (!ret)
+		return NULL;
+
+	/* Find the child using name */
+	snprintf(name, sizeof(name), "USB%d", id);
+	fwh = fwnode_get_named_child_node(dev->fwnode, name);
+	if (!fwh)
+		return NULL;
+
+	adev = to_acpi_device_node(fwh);
+	if (!adev)
+		goto err_put_handle;
+
+	urs_usb = acpi_create_platform_device(adev, NULL);
+	if (IS_ERR_OR_NULL(urs_usb))
+		goto err_put_handle;
+
+	return urs_usb;
+
+err_put_handle:
+	fwnode_handle_put(fwh);
+
+	return urs_usb;
+}
+
+static void dwc3_qcom_destroy_urs_usb_platdev(struct platform_device *urs_usb)
+{
+	struct fwnode_handle *fwh = urs_usb->dev.fwnode;
+
+	platform_device_unregister(urs_usb);
+	fwnode_handle_put(fwh);
+}
+
+static int dwc3_qcom_probe(struct platform_device *pdev)
+{
+	struct device_node	*np = pdev->dev.of_node;
+	struct device		*dev = &pdev->dev;
+	struct dwc3_qcom	*qcom;
+	struct resource		*res, *parent_res = NULL;
+	struct resource		local_res;
+	int			ret, i;
+	bool			ignore_pipe_clk;
+	bool			wakeup_source;
+
+	qcom = devm_kzalloc(&pdev->dev, sizeof(*qcom), GFP_KERNEL);
+	if (!qcom)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, qcom);
+	qcom->dev = &pdev->dev;
+
+	if (has_acpi_companion(dev)) {
+		qcom->acpi_pdata = acpi_device_get_match_data(dev);
+		if (!qcom->acpi_pdata) {
+			dev_err(&pdev->dev, "no supporting ACPI device data\n");
+			return -EINVAL;
+		}
+	}
+
+	qcom->resets = devm_reset_control_array_get_optional_exclusive(dev);
+	if (IS_ERR(qcom->resets)) {
+		ret = PTR_ERR(qcom->resets);
+		dev_err(&pdev->dev, "failed to get resets, err=%d\n", ret);
+		return ret;
+	}
+
+	ret = reset_control_assert(qcom->resets);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to assert resets, err=%d\n", ret);
+		return ret;
+	}
+
+	usleep_range(10, 1000);
+
+	ret = reset_control_deassert(qcom->resets);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to deassert resets, err=%d\n", ret);
+		goto reset_assert;
+	}
+
+	ret = dwc3_qcom_clk_init(qcom, of_clk_get_parent_count(np));
+	if (ret) {
+		dev_err(dev, "failed to get clocks\n");
+		goto reset_assert;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	if (np) {
+		parent_res = res;
+	} else {
+		memcpy(&local_res, res, sizeof(struct resource));
+		parent_res = &local_res;
+
+		parent_res->start = res->start +
+			qcom->acpi_pdata->qscratch_base_offset;
+		parent_res->end = parent_res->start +
+			qcom->acpi_pdata->qscratch_base_size;
+
+		if (qcom->acpi_pdata->is_urs) {
+			qcom->urs_usb = dwc3_qcom_create_urs_usb_platdev(dev);
+			if (IS_ERR_OR_NULL(qcom->urs_usb)) {
+				dev_err(dev, "failed to create URS USB platdev\n");
+				if (!qcom->urs_usb)
+					ret = -ENODEV;
+				else
+					ret = PTR_ERR(qcom->urs_usb);
+				goto clk_disable;
+			}
+		}
+	}
+
+	qcom->qscratch_base = devm_ioremap_resource(dev, parent_res);
+	if (IS_ERR(qcom->qscratch_base)) {
+		ret = PTR_ERR(qcom->qscratch_base);
+		goto free_urs;
+	}
+
+	ret = dwc3_qcom_setup_irq(pdev);
+	if (ret) {
+		dev_err(dev, "failed to setup IRQs, err=%d\n", ret);
+		goto free_urs;
+	}
+
+	/*
+	 * Disable pipe_clk requirement if specified. Used when dwc3
+	 * operates without SSPHY and only HS/FS/LS modes are supported.
+	 */
+	ignore_pipe_clk = device_property_read_bool(dev,
+				"qcom,select-utmi-as-pipe-clk");
+	if (ignore_pipe_clk)
+		dwc3_qcom_select_utmi_clk(qcom);
+
+	if (np)
+		ret = dwc3_qcom_of_register_core(pdev);
+	else
+		ret = dwc3_qcom_acpi_register_core(pdev);
+
+	if (ret) {
+		dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret);
+		goto free_urs;
+	}
+
+	ret = dwc3_qcom_interconnect_init(qcom);
+	if (ret)
+		goto depopulate;
+
+	qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev);
+
+	/* enable vbus override for device mode */
+	if (qcom->mode != USB_DR_MODE_HOST)
+		dwc3_qcom_vbus_override_enable(qcom, true);
+
+	/* register extcon to override sw_vbus on Vbus change later */
+	ret = dwc3_qcom_register_extcon(qcom);
+	if (ret)
+		goto interconnect_exit;
+
+	wakeup_source = of_property_read_bool(dev->of_node, "wakeup-source");
+	device_init_wakeup(&pdev->dev, wakeup_source);
+	device_init_wakeup(&qcom->dwc3->dev, wakeup_source);
+
+	qcom->is_suspended = false;
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_forbid(dev);
+
+	return 0;
+
+interconnect_exit:
+	dwc3_qcom_interconnect_exit(qcom);
+depopulate:
+	if (np) {
+		of_platform_depopulate(&pdev->dev);
+	} else {
+		device_remove_software_node(&qcom->dwc3->dev);
+		platform_device_del(qcom->dwc3);
+	}
+	platform_device_put(qcom->dwc3);
+free_urs:
+	if (qcom->urs_usb)
+		dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb);
+clk_disable:
+	for (i = qcom->num_clocks - 1; i >= 0; i--) {
+		clk_disable_unprepare(qcom->clks[i]);
+		clk_put(qcom->clks[i]);
+	}
+reset_assert:
+	reset_control_assert(qcom->resets);
+
+	return ret;
+}
+
+static int dwc3_qcom_remove(struct platform_device *pdev)
+{
+	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	int i;
+
+	if (np) {
+		of_platform_depopulate(&pdev->dev);
+	} else {
+		device_remove_software_node(&qcom->dwc3->dev);
+		platform_device_del(qcom->dwc3);
+	}
+	platform_device_put(qcom->dwc3);
+
+	if (qcom->urs_usb)
+		dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb);
+
+	for (i = qcom->num_clocks - 1; i >= 0; i--) {
+		clk_disable_unprepare(qcom->clks[i]);
+		clk_put(qcom->clks[i]);
+	}
+	qcom->num_clocks = 0;
+
+	dwc3_qcom_interconnect_exit(qcom);
+	reset_control_assert(qcom->resets);
+
+	pm_runtime_allow(dev);
+	pm_runtime_disable(dev);
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_qcom_pm_suspend(struct device *dev)
+{
+	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
+	bool wakeup = device_may_wakeup(dev);
+	int ret;
+
+	ret = dwc3_qcom_suspend(qcom, wakeup);
+	if (ret)
+		return ret;
+
+	qcom->pm_suspended = true;
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_qcom_pm_resume(struct device *dev)
+{
+	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
+	bool wakeup = device_may_wakeup(dev);
+	int ret;
+
+	ret = dwc3_qcom_resume(qcom, wakeup);
+	if (ret)
+		return ret;
+
+	qcom->pm_suspended = false;
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_qcom_runtime_suspend(struct device *dev)
+{
+	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
+
+	return dwc3_qcom_suspend(qcom, true);
+}
+
+static int __maybe_unused dwc3_qcom_runtime_resume(struct device *dev)
+{
+	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
+
+	return dwc3_qcom_resume(qcom, true);
+}
+
+static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwc3_qcom_pm_suspend, dwc3_qcom_pm_resume)
+	SET_RUNTIME_PM_OPS(dwc3_qcom_runtime_suspend, dwc3_qcom_runtime_resume,
+			   NULL)
+};
+
+static const struct of_device_id dwc3_qcom_of_match[] = {
+	{ .compatible = "qcom,dwc3" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
+	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
+	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
+	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
+	.hs_phy_irq_index = 1,
+	.dp_hs_phy_irq_index = 4,
+	.dm_hs_phy_irq_index = 3,
+	.ss_phy_irq_index = 2
+};
+
+static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = {
+	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
+	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
+	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
+	.hs_phy_irq_index = 1,
+	.dp_hs_phy_irq_index = 4,
+	.dm_hs_phy_irq_index = 3,
+	.ss_phy_irq_index = 2,
+	.is_urs = true,
+};
+
+static const struct acpi_device_id dwc3_qcom_acpi_match[] = {
+	{ "QCOM2430", (unsigned long)&sdm845_acpi_pdata },
+	{ "QCOM0304", (unsigned long)&sdm845_acpi_urs_pdata },
+	{ "QCOM0497", (unsigned long)&sdm845_acpi_urs_pdata },
+	{ "QCOM04A6", (unsigned long)&sdm845_acpi_pdata },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, dwc3_qcom_acpi_match);
+#endif
+
+static struct platform_driver dwc3_qcom_driver = {
+	.probe		= dwc3_qcom_probe,
+	.remove		= dwc3_qcom_remove,
+	.driver		= {
+		.name	= "dwc3-qcom",
+		.pm	= &dwc3_qcom_dev_pm_ops,
+		.of_match_table	= dwc3_qcom_of_match,
+		.acpi_match_table = ACPI_PTR(dwc3_qcom_acpi_match),
+	},
+};
+
+module_platform_driver(dwc3_qcom_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare DWC3 QCOM Glue Driver");
diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c
new file mode 100644
index 000000000..fea5290de
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-st.c
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dwc3-st.c Support for dwc3 platform devices on ST Microelectronics platforms
+ *
+ * This is a small driver for the dwc3 to provide the glue logic
+ * to configure the controller. Tested on STi platforms.
+ *
+ * Copyright (C) 2014 Stmicroelectronics
+ *
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ * Contributors: Aymen Bouattay <aymen.bouattay@st.com>
+ *               Peter Griffin <peter.griffin@linaro.org>
+ *
+ * Inspired by dwc3-omap.c and dwc3-exynos.c.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/usb/of.h>
+
+#include "core.h"
+#include "io.h"
+
+/* glue registers */
+#define CLKRST_CTRL		0x00
+#define AUX_CLK_EN		BIT(0)
+#define SW_PIPEW_RESET_N	BIT(4)
+#define EXT_CFG_RESET_N		BIT(8)
+/*
+ * 1'b0 : The host controller complies with the xHCI revision 0.96
+ * 1'b1 : The host controller complies with the xHCI revision 1.0
+ */
+#define XHCI_REVISION		BIT(12)
+
+#define USB2_VBUS_MNGMNT_SEL1	0x2C
+/*
+ * For all fields in USB2_VBUS_MNGMNT_SEL1
+ * 2’b00 : Override value from Reg 0x30 is selected
+ * 2’b01 : utmiotg_<signal_name> from usb3_top is selected
+ * 2’b10 : pipew_<signal_name> from PIPEW instance is selected
+ * 2’b11 : value is 1'b0
+ */
+#define USB2_VBUS_REG30		0x0
+#define USB2_VBUS_UTMIOTG	0x1
+#define USB2_VBUS_PIPEW		0x2
+#define USB2_VBUS_ZERO		0x3
+
+#define SEL_OVERRIDE_VBUSVALID(n)	(n << 0)
+#define SEL_OVERRIDE_POWERPRESENT(n)	(n << 4)
+#define SEL_OVERRIDE_BVALID(n)		(n << 8)
+
+/* Static DRD configuration */
+#define USB3_CONTROL_MASK		0xf77
+
+#define USB3_DEVICE_NOT_HOST		BIT(0)
+#define USB3_FORCE_VBUSVALID		BIT(1)
+#define USB3_DELAY_VBUSVALID		BIT(2)
+#define USB3_SEL_FORCE_OPMODE		BIT(4)
+#define USB3_FORCE_OPMODE(n)		(n << 5)
+#define USB3_SEL_FORCE_DPPULLDOWN2	BIT(8)
+#define USB3_FORCE_DPPULLDOWN2		BIT(9)
+#define USB3_SEL_FORCE_DMPULLDOWN2	BIT(10)
+#define USB3_FORCE_DMPULLDOWN2		BIT(11)
+
+/**
+ * struct st_dwc3 - dwc3-st driver private structure
+ * @dev:		device pointer
+ * @glue_base:		ioaddr for the glue registers
+ * @regmap:		regmap pointer for getting syscfg
+ * @syscfg_reg_off:	usb syscfg control offset
+ * @dr_mode:		drd static host/device config
+ * @rstc_pwrdn:		rest controller for powerdown signal
+ * @rstc_rst:		reset controller for softreset signal
+ */
+
+struct st_dwc3 {
+	struct device *dev;
+	void __iomem *glue_base;
+	struct regmap *regmap;
+	int syscfg_reg_off;
+	enum usb_dr_mode dr_mode;
+	struct reset_control *rstc_pwrdn;
+	struct reset_control *rstc_rst;
+};
+
+static inline u32 st_dwc3_readl(void __iomem *base, u32 offset)
+{
+	return readl_relaxed(base + offset);
+}
+
+static inline void st_dwc3_writel(void __iomem *base, u32 offset, u32 value)
+{
+	writel_relaxed(value, base + offset);
+}
+
+/**
+ * st_dwc3_drd_init: program the port
+ * @dwc3_data: driver private structure
+ * Description: this function is to program the port as either host or device
+ * according to the static configuration passed from devicetree.
+ * OTG and dual role are not yet supported!
+ */
+static int st_dwc3_drd_init(struct st_dwc3 *dwc3_data)
+{
+	u32 val;
+	int err;
+
+	err = regmap_read(dwc3_data->regmap, dwc3_data->syscfg_reg_off, &val);
+	if (err)
+		return err;
+
+	val &= USB3_CONTROL_MASK;
+
+	switch (dwc3_data->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+
+		val &= ~(USB3_DELAY_VBUSVALID
+			| USB3_SEL_FORCE_OPMODE | USB3_FORCE_OPMODE(0x3)
+			| USB3_SEL_FORCE_DPPULLDOWN2 | USB3_FORCE_DPPULLDOWN2
+			| USB3_SEL_FORCE_DMPULLDOWN2 | USB3_FORCE_DMPULLDOWN2);
+
+		/*
+		 * USB3_PORT2_FORCE_VBUSVALID When '1' and when
+		 * USB3_PORT2_DEVICE_NOT_HOST = 1, forces VBUSVLDEXT2 input
+		 * of the pico PHY to 1.
+		 */
+
+		val |= USB3_DEVICE_NOT_HOST | USB3_FORCE_VBUSVALID;
+		break;
+
+	case USB_DR_MODE_HOST:
+
+		val &= ~(USB3_DEVICE_NOT_HOST | USB3_FORCE_VBUSVALID
+			| USB3_SEL_FORCE_OPMODE	| USB3_FORCE_OPMODE(0x3)
+			| USB3_SEL_FORCE_DPPULLDOWN2 | USB3_FORCE_DPPULLDOWN2
+			| USB3_SEL_FORCE_DMPULLDOWN2 | USB3_FORCE_DMPULLDOWN2);
+
+		/*
+		 * USB3_DELAY_VBUSVALID is ANDed with USB_C_VBUSVALID. Thus,
+		 * when set to ‘0‘, it can delay the arrival of VBUSVALID
+		 * information to VBUSVLDEXT2 input of the pico PHY.
+		 * We don't want to do that so we set the bit to '1'.
+		 */
+
+		val |= USB3_DELAY_VBUSVALID;
+		break;
+
+	default:
+		dev_err(dwc3_data->dev, "Unsupported mode of operation %d\n",
+			dwc3_data->dr_mode);
+		return -EINVAL;
+	}
+
+	return regmap_write(dwc3_data->regmap, dwc3_data->syscfg_reg_off, val);
+}
+
+/**
+ * st_dwc3_init: init the controller via glue logic
+ * @dwc3_data: driver private structure
+ */
+static void st_dwc3_init(struct st_dwc3 *dwc3_data)
+{
+	u32 reg = st_dwc3_readl(dwc3_data->glue_base, CLKRST_CTRL);
+
+	reg |= AUX_CLK_EN | EXT_CFG_RESET_N | XHCI_REVISION;
+	reg &= ~SW_PIPEW_RESET_N;
+	st_dwc3_writel(dwc3_data->glue_base, CLKRST_CTRL, reg);
+
+	/* configure mux for vbus, powerpresent and bvalid signals */
+	reg = st_dwc3_readl(dwc3_data->glue_base, USB2_VBUS_MNGMNT_SEL1);
+
+	reg |= SEL_OVERRIDE_VBUSVALID(USB2_VBUS_UTMIOTG) |
+		SEL_OVERRIDE_POWERPRESENT(USB2_VBUS_UTMIOTG) |
+		SEL_OVERRIDE_BVALID(USB2_VBUS_UTMIOTG);
+
+	st_dwc3_writel(dwc3_data->glue_base, USB2_VBUS_MNGMNT_SEL1, reg);
+
+	reg = st_dwc3_readl(dwc3_data->glue_base, CLKRST_CTRL);
+	reg |= SW_PIPEW_RESET_N;
+	st_dwc3_writel(dwc3_data->glue_base, CLKRST_CTRL, reg);
+}
+
+static int st_dwc3_probe(struct platform_device *pdev)
+{
+	struct st_dwc3 *dwc3_data;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node, *child;
+	struct platform_device *child_pdev;
+	struct regmap *regmap;
+	int ret;
+
+	dwc3_data = devm_kzalloc(dev, sizeof(*dwc3_data), GFP_KERNEL);
+	if (!dwc3_data)
+		return -ENOMEM;
+
+	dwc3_data->glue_base =
+		devm_platform_ioremap_resource_byname(pdev, "reg-glue");
+	if (IS_ERR(dwc3_data->glue_base))
+		return PTR_ERR(dwc3_data->glue_base);
+
+	regmap = syscon_regmap_lookup_by_phandle(node, "st,syscfg");
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	dwc3_data->dev = dev;
+	dwc3_data->regmap = regmap;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "syscfg-reg");
+	if (!res) {
+		ret = -ENXIO;
+		goto undo_platform_dev_alloc;
+	}
+
+	dwc3_data->syscfg_reg_off = res->start;
+
+	dev_vdbg(&pdev->dev, "glue-logic addr 0x%pK, syscfg-reg offset 0x%x\n",
+		 dwc3_data->glue_base, dwc3_data->syscfg_reg_off);
+
+	dwc3_data->rstc_pwrdn =
+		devm_reset_control_get_exclusive(dev, "powerdown");
+	if (IS_ERR(dwc3_data->rstc_pwrdn)) {
+		dev_err(&pdev->dev, "could not get power controller\n");
+		ret = PTR_ERR(dwc3_data->rstc_pwrdn);
+		goto undo_platform_dev_alloc;
+	}
+
+	/* Manage PowerDown */
+	reset_control_deassert(dwc3_data->rstc_pwrdn);
+
+	dwc3_data->rstc_rst =
+		devm_reset_control_get_shared(dev, "softreset");
+	if (IS_ERR(dwc3_data->rstc_rst)) {
+		dev_err(&pdev->dev, "could not get reset controller\n");
+		ret = PTR_ERR(dwc3_data->rstc_rst);
+		goto undo_powerdown;
+	}
+
+	/* Manage SoftReset */
+	reset_control_deassert(dwc3_data->rstc_rst);
+
+	child = of_get_compatible_child(node, "snps,dwc3");
+	if (!child) {
+		dev_err(&pdev->dev, "failed to find dwc3 core node\n");
+		ret = -ENODEV;
+		goto err_node_put;
+	}
+
+	/* Allocate and initialize the core */
+	ret = of_platform_populate(node, NULL, NULL, dev);
+	if (ret) {
+		dev_err(dev, "failed to add dwc3 core\n");
+		goto err_node_put;
+	}
+
+	child_pdev = of_find_device_by_node(child);
+	if (!child_pdev) {
+		dev_err(dev, "failed to find dwc3 core device\n");
+		ret = -ENODEV;
+		goto err_node_put;
+	}
+
+	dwc3_data->dr_mode = usb_get_dr_mode(&child_pdev->dev);
+	of_node_put(child);
+	platform_device_put(child_pdev);
+
+	/*
+	 * Configure the USB port as device or host according to the static
+	 * configuration passed from DT.
+	 * DRD is the only mode currently supported so this will be enhanced
+	 * as soon as OTG is available.
+	 */
+	ret = st_dwc3_drd_init(dwc3_data);
+	if (ret) {
+		dev_err(dev, "drd initialisation failed\n");
+		goto undo_softreset;
+	}
+
+	/* ST glue logic init */
+	st_dwc3_init(dwc3_data);
+
+	platform_set_drvdata(pdev, dwc3_data);
+	return 0;
+
+err_node_put:
+	of_node_put(child);
+undo_softreset:
+	reset_control_assert(dwc3_data->rstc_rst);
+undo_powerdown:
+	reset_control_assert(dwc3_data->rstc_pwrdn);
+undo_platform_dev_alloc:
+	platform_device_put(pdev);
+	return ret;
+}
+
+static int st_dwc3_remove(struct platform_device *pdev)
+{
+	struct st_dwc3 *dwc3_data = platform_get_drvdata(pdev);
+
+	of_platform_depopulate(&pdev->dev);
+
+	reset_control_assert(dwc3_data->rstc_pwrdn);
+	reset_control_assert(dwc3_data->rstc_rst);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int st_dwc3_suspend(struct device *dev)
+{
+	struct st_dwc3 *dwc3_data = dev_get_drvdata(dev);
+
+	reset_control_assert(dwc3_data->rstc_pwrdn);
+	reset_control_assert(dwc3_data->rstc_rst);
+
+	pinctrl_pm_select_sleep_state(dev);
+
+	return 0;
+}
+
+static int st_dwc3_resume(struct device *dev)
+{
+	struct st_dwc3 *dwc3_data = dev_get_drvdata(dev);
+	int ret;
+
+	pinctrl_pm_select_default_state(dev);
+
+	reset_control_deassert(dwc3_data->rstc_pwrdn);
+	reset_control_deassert(dwc3_data->rstc_rst);
+
+	ret = st_dwc3_drd_init(dwc3_data);
+	if (ret) {
+		dev_err(dev, "drd initialisation failed\n");
+		return ret;
+	}
+
+	/* ST glue logic init */
+	st_dwc3_init(dwc3_data);
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(st_dwc3_dev_pm_ops, st_dwc3_suspend, st_dwc3_resume);
+
+static const struct of_device_id st_dwc3_match[] = {
+	{ .compatible = "st,stih407-dwc3" },
+	{ /* sentinel */ },
+};
+
+MODULE_DEVICE_TABLE(of, st_dwc3_match);
+
+static struct platform_driver st_dwc3_driver = {
+	.probe = st_dwc3_probe,
+	.remove = st_dwc3_remove,
+	.driver = {
+		.name = "usb-st-dwc3",
+		.of_match_table = st_dwc3_match,
+		.pm = &st_dwc3_dev_pm_ops,
+	},
+};
+
+module_platform_driver(st_dwc3_driver);
+
+MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
+MODULE_DESCRIPTION("DesignWare USB3 STi Glue Layer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c
new file mode 100644
index 000000000..0745e9f11
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-xilinx.c
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dwc3-xilinx.c - Xilinx DWC3 controller specific glue driver
+ *
+ * Authors: Manish Narani <manish.narani@xilinx.com>
+ *          Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/firmware/xlnx-zynqmp.h>
+#include <linux/io.h>
+
+#include <linux/phy/phy.h>
+
+/* USB phy reset mask register */
+#define XLNX_USB_PHY_RST_EN			0x001C
+#define XLNX_PHY_RST_MASK			0x1
+
+/* Xilinx USB 3.0 IP Register */
+#define XLNX_USB_TRAFFIC_ROUTE_CONFIG		0x005C
+#define XLNX_USB_TRAFFIC_ROUTE_FPD		0x1
+
+/* Versal USB Reset ID */
+#define VERSAL_USB_RESET_ID			0xC104036
+
+#define XLNX_USB_FPD_PIPE_CLK			0x7c
+#define PIPE_CLK_DESELECT			1
+#define PIPE_CLK_SELECT				0
+#define XLNX_USB_FPD_POWER_PRSNT		0x80
+#define FPD_POWER_PRSNT_OPTION			BIT(0)
+
+struct dwc3_xlnx {
+	int				num_clocks;
+	struct clk_bulk_data		*clks;
+	struct device			*dev;
+	void __iomem			*regs;
+	int				(*pltfm_init)(struct dwc3_xlnx *data);
+	struct phy			*usb3_phy;
+};
+
+static void dwc3_xlnx_mask_phy_rst(struct dwc3_xlnx *priv_data, bool mask)
+{
+	u32 reg;
+
+	/*
+	 * Enable or disable ULPI PHY reset from USB Controller.
+	 * This does not actually reset the phy, but just controls
+	 * whether USB controller can or cannot reset ULPI PHY.
+	 */
+	reg = readl(priv_data->regs + XLNX_USB_PHY_RST_EN);
+
+	if (mask)
+		reg &= ~XLNX_PHY_RST_MASK;
+	else
+		reg |= XLNX_PHY_RST_MASK;
+
+	writel(reg, priv_data->regs + XLNX_USB_PHY_RST_EN);
+}
+
+static int dwc3_xlnx_init_versal(struct dwc3_xlnx *priv_data)
+{
+	struct device		*dev = priv_data->dev;
+	int			ret;
+
+	dwc3_xlnx_mask_phy_rst(priv_data, false);
+
+	/* Assert and De-assert reset */
+	ret = zynqmp_pm_reset_assert(VERSAL_USB_RESET_ID,
+				     PM_RESET_ACTION_ASSERT);
+	if (ret < 0) {
+		dev_err_probe(dev, ret, "failed to assert Reset\n");
+		return ret;
+	}
+
+	ret = zynqmp_pm_reset_assert(VERSAL_USB_RESET_ID,
+				     PM_RESET_ACTION_RELEASE);
+	if (ret < 0) {
+		dev_err_probe(dev, ret, "failed to De-assert Reset\n");
+		return ret;
+	}
+
+	dwc3_xlnx_mask_phy_rst(priv_data, true);
+
+	return 0;
+}
+
+static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
+{
+	struct device		*dev = priv_data->dev;
+	struct reset_control	*crst, *hibrst, *apbrst;
+	struct gpio_desc	*reset_gpio;
+	int			ret = 0;
+	u32			reg;
+
+	priv_data->usb3_phy = devm_phy_optional_get(dev, "usb3-phy");
+	if (IS_ERR(priv_data->usb3_phy)) {
+		ret = PTR_ERR(priv_data->usb3_phy);
+		dev_err_probe(dev, ret,
+			      "failed to get USB3 PHY\n");
+		goto err;
+	}
+
+	/*
+	 * The following core resets are not required unless a USB3 PHY
+	 * is used, and the subsequent register settings are not required
+	 * unless a core reset is performed (they should be set properly
+	 * by the first-stage boot loader, but may be reverted by a core
+	 * reset). They may also break the configuration if USB3 is actually
+	 * in use but the usb3-phy entry is missing from the device tree.
+	 * Therefore, skip these operations in this case.
+	 */
+	if (!priv_data->usb3_phy)
+		goto skip_usb3_phy;
+
+	crst = devm_reset_control_get_exclusive(dev, "usb_crst");
+	if (IS_ERR(crst)) {
+		ret = PTR_ERR(crst);
+		dev_err_probe(dev, ret,
+			      "failed to get core reset signal\n");
+		goto err;
+	}
+
+	hibrst = devm_reset_control_get_exclusive(dev, "usb_hibrst");
+	if (IS_ERR(hibrst)) {
+		ret = PTR_ERR(hibrst);
+		dev_err_probe(dev, ret,
+			      "failed to get hibernation reset signal\n");
+		goto err;
+	}
+
+	apbrst = devm_reset_control_get_exclusive(dev, "usb_apbrst");
+	if (IS_ERR(apbrst)) {
+		ret = PTR_ERR(apbrst);
+		dev_err_probe(dev, ret,
+			      "failed to get APB reset signal\n");
+		goto err;
+	}
+
+	ret = reset_control_assert(crst);
+	if (ret < 0) {
+		dev_err(dev, "Failed to assert core reset\n");
+		goto err;
+	}
+
+	ret = reset_control_assert(hibrst);
+	if (ret < 0) {
+		dev_err(dev, "Failed to assert hibernation reset\n");
+		goto err;
+	}
+
+	ret = reset_control_assert(apbrst);
+	if (ret < 0) {
+		dev_err(dev, "Failed to assert APB reset\n");
+		goto err;
+	}
+
+	ret = phy_init(priv_data->usb3_phy);
+	if (ret < 0) {
+		phy_exit(priv_data->usb3_phy);
+		goto err;
+	}
+
+	ret = reset_control_deassert(apbrst);
+	if (ret < 0) {
+		dev_err(dev, "Failed to release APB reset\n");
+		goto err;
+	}
+
+	/* Set PIPE Power Present signal in FPD Power Present Register*/
+	writel(FPD_POWER_PRSNT_OPTION, priv_data->regs + XLNX_USB_FPD_POWER_PRSNT);
+
+	/* Set the PIPE Clock Select bit in FPD PIPE Clock register */
+	writel(PIPE_CLK_SELECT, priv_data->regs + XLNX_USB_FPD_PIPE_CLK);
+
+	ret = reset_control_deassert(crst);
+	if (ret < 0) {
+		dev_err(dev, "Failed to release core reset\n");
+		goto err;
+	}
+
+	ret = reset_control_deassert(hibrst);
+	if (ret < 0) {
+		dev_err(dev, "Failed to release hibernation reset\n");
+		goto err;
+	}
+
+	ret = phy_power_on(priv_data->usb3_phy);
+	if (ret < 0) {
+		phy_exit(priv_data->usb3_phy);
+		goto err;
+	}
+
+skip_usb3_phy:
+	/* ulpi reset via gpio-modepin or gpio-framework driver */
+	reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(reset_gpio)) {
+		return dev_err_probe(dev, PTR_ERR(reset_gpio),
+				     "Failed to request reset GPIO\n");
+	}
+
+	if (reset_gpio) {
+		/* Toggle ulpi to reset the phy. */
+		gpiod_set_value_cansleep(reset_gpio, 1);
+		usleep_range(5000, 10000);
+		gpiod_set_value_cansleep(reset_gpio, 0);
+		usleep_range(5000, 10000);
+	}
+
+	/*
+	 * This routes the USB DMA traffic to go through FPD path instead
+	 * of reaching DDR directly. This traffic routing is needed to
+	 * make SMMU and CCI work with USB DMA.
+	 */
+	if (of_dma_is_coherent(dev->of_node) || device_iommu_mapped(dev)) {
+		reg = readl(priv_data->regs + XLNX_USB_TRAFFIC_ROUTE_CONFIG);
+		reg |= XLNX_USB_TRAFFIC_ROUTE_FPD;
+		writel(reg, priv_data->regs + XLNX_USB_TRAFFIC_ROUTE_CONFIG);
+	}
+
+err:
+	return ret;
+}
+
+static const struct of_device_id dwc3_xlnx_of_match[] = {
+	{
+		.compatible = "xlnx,zynqmp-dwc3",
+		.data = &dwc3_xlnx_init_zynqmp,
+	},
+	{
+		.compatible = "xlnx,versal-dwc3",
+		.data = &dwc3_xlnx_init_versal,
+	},
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, dwc3_xlnx_of_match);
+
+static int dwc3_xlnx_probe(struct platform_device *pdev)
+{
+	struct dwc3_xlnx		*priv_data;
+	struct device			*dev = &pdev->dev;
+	struct device_node		*np = dev->of_node;
+	const struct of_device_id	*match;
+	void __iomem			*regs;
+	int				ret;
+
+	priv_data = devm_kzalloc(dev, sizeof(*priv_data), GFP_KERNEL);
+	if (!priv_data)
+		return -ENOMEM;
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs)) {
+		ret = PTR_ERR(regs);
+		dev_err_probe(dev, ret, "failed to map registers\n");
+		return ret;
+	}
+
+	match = of_match_node(dwc3_xlnx_of_match, pdev->dev.of_node);
+
+	priv_data->pltfm_init = match->data;
+	priv_data->regs = regs;
+	priv_data->dev = dev;
+
+	platform_set_drvdata(pdev, priv_data);
+
+	ret = devm_clk_bulk_get_all(priv_data->dev, &priv_data->clks);
+	if (ret < 0)
+		return ret;
+
+	priv_data->num_clocks = ret;
+
+	ret = clk_bulk_prepare_enable(priv_data->num_clocks, priv_data->clks);
+	if (ret)
+		return ret;
+
+	ret = priv_data->pltfm_init(priv_data);
+	if (ret)
+		goto err_clk_put;
+
+	ret = of_platform_populate(np, NULL, NULL, dev);
+	if (ret)
+		goto err_clk_put;
+
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	pm_suspend_ignore_children(dev, false);
+	pm_runtime_get_sync(dev);
+
+	return 0;
+
+err_clk_put:
+	clk_bulk_disable_unprepare(priv_data->num_clocks, priv_data->clks);
+
+	return ret;
+}
+
+static int dwc3_xlnx_remove(struct platform_device *pdev)
+{
+	struct dwc3_xlnx	*priv_data = platform_get_drvdata(pdev);
+	struct device		*dev = &pdev->dev;
+
+	of_platform_depopulate(dev);
+
+	clk_bulk_disable_unprepare(priv_data->num_clocks, priv_data->clks);
+	priv_data->num_clocks = 0;
+
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
+	pm_runtime_set_suspended(dev);
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_xlnx_runtime_suspend(struct device *dev)
+{
+	struct dwc3_xlnx *priv_data = dev_get_drvdata(dev);
+
+	clk_bulk_disable(priv_data->num_clocks, priv_data->clks);
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_xlnx_runtime_resume(struct device *dev)
+{
+	struct dwc3_xlnx *priv_data = dev_get_drvdata(dev);
+
+	return clk_bulk_enable(priv_data->num_clocks, priv_data->clks);
+}
+
+static int __maybe_unused dwc3_xlnx_runtime_idle(struct device *dev)
+{
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_autosuspend(dev);
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_xlnx_suspend(struct device *dev)
+{
+	struct dwc3_xlnx *priv_data = dev_get_drvdata(dev);
+
+	phy_exit(priv_data->usb3_phy);
+
+	/* Disable the clocks */
+	clk_bulk_disable(priv_data->num_clocks, priv_data->clks);
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_xlnx_resume(struct device *dev)
+{
+	struct dwc3_xlnx *priv_data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_bulk_enable(priv_data->num_clocks, priv_data->clks);
+	if (ret)
+		return ret;
+
+	ret = phy_init(priv_data->usb3_phy);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_power_on(priv_data->usb3_phy);
+	if (ret < 0) {
+		phy_exit(priv_data->usb3_phy);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops dwc3_xlnx_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwc3_xlnx_suspend, dwc3_xlnx_resume)
+	SET_RUNTIME_PM_OPS(dwc3_xlnx_runtime_suspend,
+			   dwc3_xlnx_runtime_resume, dwc3_xlnx_runtime_idle)
+};
+
+static struct platform_driver dwc3_xlnx_driver = {
+	.probe		= dwc3_xlnx_probe,
+	.remove		= dwc3_xlnx_remove,
+	.driver		= {
+		.name		= "dwc3-xilinx",
+		.of_match_table	= dwc3_xlnx_of_match,
+		.pm		= &dwc3_xlnx_dev_pm_ops,
+	},
+};
+
+module_platform_driver(dwc3_xlnx_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Xilinx DWC3 controller specific glue driver");
+MODULE_AUTHOR("Manish Narani <manish.narani@xilinx.com>");
+MODULE_AUTHOR("Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>");
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
new file mode 100644
index 000000000..ec3c33266
--- /dev/null
+++ b/drivers/usb/dwc3/ep0.c
@@ -0,0 +1,1211 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/composite.h>
+
+#include "core.h"
+#include "debug.h"
+#include "gadget.h"
+#include "io.h"
+
+static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep);
+static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
+		struct dwc3_ep *dep, struct dwc3_request *req);
+
+static void dwc3_ep0_prepare_one_trb(struct dwc3_ep *dep,
+		dma_addr_t buf_dma, u32 len, u32 type, bool chain)
+{
+	struct dwc3_trb			*trb;
+	struct dwc3			*dwc;
+
+	dwc = dep->dwc;
+	trb = &dwc->ep0_trb[dep->trb_enqueue];
+
+	if (chain)
+		dep->trb_enqueue++;
+
+	trb->bpl = lower_32_bits(buf_dma);
+	trb->bph = upper_32_bits(buf_dma);
+	trb->size = len;
+	trb->ctrl = type;
+
+	trb->ctrl |= (DWC3_TRB_CTRL_HWO
+			| DWC3_TRB_CTRL_ISP_IMI);
+
+	if (chain)
+		trb->ctrl |= DWC3_TRB_CTRL_CHN;
+	else
+		trb->ctrl |= (DWC3_TRB_CTRL_IOC
+				| DWC3_TRB_CTRL_LST);
+
+	trace_dwc3_prepare_trb(dep, trb);
+}
+
+static int dwc3_ep0_start_trans(struct dwc3_ep *dep)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+	struct dwc3			*dwc;
+	int				ret;
+
+	if (dep->flags & DWC3_EP_TRANSFER_STARTED)
+		return 0;
+
+	dwc = dep->dwc;
+
+	memset(&params, 0, sizeof(params));
+	params.param0 = upper_32_bits(dwc->ep0_trb_addr);
+	params.param1 = lower_32_bits(dwc->ep0_trb_addr);
+
+	ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_STARTTRANSFER, &params);
+	if (ret < 0)
+		return ret;
+
+	dwc->ep0_next_event = DWC3_EP0_COMPLETE;
+
+	return 0;
+}
+
+static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
+		struct dwc3_request *req)
+{
+	struct dwc3		*dwc = dep->dwc;
+
+	req->request.actual	= 0;
+	req->request.status	= -EINPROGRESS;
+	req->epnum		= dep->number;
+
+	list_add_tail(&req->list, &dep->pending_list);
+
+	/*
+	 * Gadget driver might not be quick enough to queue a request
+	 * before we get a Transfer Not Ready event on this endpoint.
+	 *
+	 * In that case, we will set DWC3_EP_PENDING_REQUEST. When that
+	 * flag is set, it's telling us that as soon as Gadget queues the
+	 * required request, we should kick the transfer here because the
+	 * IRQ we were waiting for is long gone.
+	 */
+	if (dep->flags & DWC3_EP_PENDING_REQUEST) {
+		unsigned int direction;
+
+		direction = !!(dep->flags & DWC3_EP0_DIR_IN);
+
+		if (dwc->ep0state != EP0_DATA_PHASE) {
+			dev_WARN(dwc->dev, "Unexpected pending request\n");
+			return 0;
+		}
+
+		__dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
+
+		dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
+				DWC3_EP0_DIR_IN);
+
+		return 0;
+	}
+
+	/*
+	 * In case gadget driver asked us to delay the STATUS phase,
+	 * handle it here.
+	 */
+	if (dwc->delayed_status) {
+		unsigned int direction;
+
+		direction = !dwc->ep0_expect_in;
+		dwc->delayed_status = false;
+		usb_gadget_set_state(dwc->gadget, USB_STATE_CONFIGURED);
+
+		if (dwc->ep0state == EP0_STATUS_PHASE)
+			__dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
+
+		return 0;
+	}
+
+	/*
+	 * Unfortunately we have uncovered a limitation wrt the Data Phase.
+	 *
+	 * Section 9.4 says we can wait for the XferNotReady(DATA) event to
+	 * come before issueing Start Transfer command, but if we do, we will
+	 * miss situations where the host starts another SETUP phase instead of
+	 * the DATA phase.  Such cases happen at least on TD.7.6 of the Link
+	 * Layer Compliance Suite.
+	 *
+	 * The problem surfaces due to the fact that in case of back-to-back
+	 * SETUP packets there will be no XferNotReady(DATA) generated and we
+	 * will be stuck waiting for XferNotReady(DATA) forever.
+	 *
+	 * By looking at tables 9-13 and 9-14 of the Databook, we can see that
+	 * it tells us to start Data Phase right away. It also mentions that if
+	 * we receive a SETUP phase instead of the DATA phase, core will issue
+	 * XferComplete for the DATA phase, before actually initiating it in
+	 * the wire, with the TRB's status set to "SETUP_PENDING". Such status
+	 * can only be used to print some debugging logs, as the core expects
+	 * us to go through to the STATUS phase and start a CONTROL_STATUS TRB,
+	 * just so it completes right away, without transferring anything and,
+	 * only then, we can go back to the SETUP phase.
+	 *
+	 * Because of this scenario, SNPS decided to change the programming
+	 * model of control transfers and support on-demand transfers only for
+	 * the STATUS phase. To fix the issue we have now, we will always wait
+	 * for gadget driver to queue the DATA phase's struct usb_request, then
+	 * start it right away.
+	 *
+	 * If we're actually in a 2-stage transfer, we will wait for
+	 * XferNotReady(STATUS).
+	 */
+	if (dwc->three_stage_setup) {
+		unsigned int direction;
+
+		direction = dwc->ep0_expect_in;
+		dwc->ep0state = EP0_DATA_PHASE;
+
+		__dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
+
+		dep->flags &= ~DWC3_EP0_DIR_IN;
+	}
+
+	return 0;
+}
+
+int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
+		gfp_t gfp_flags)
+{
+	struct dwc3_request		*req = to_dwc3_request(request);
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+
+	unsigned long			flags;
+
+	int				ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	if (!dep->endpoint.desc || !dwc->pullups_connected || !dwc->connected) {
+		dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
+				dep->name);
+		ret = -ESHUTDOWN;
+		goto out;
+	}
+
+	/* we share one TRB for ep0/1 */
+	if (!list_empty(&dep->pending_list)) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = __dwc3_gadget_ep0_queue(dep, req);
+
+out:
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
+{
+	struct dwc3_ep		*dep;
+
+	/* reinitialize physical ep1 */
+	dep = dwc->eps[1];
+	dep->flags = DWC3_EP_ENABLED;
+
+	/* stall is always issued on EP0 */
+	dep = dwc->eps[0];
+	__dwc3_gadget_ep_set_halt(dep, 1, false);
+	dep->flags = DWC3_EP_ENABLED;
+	dwc->delayed_status = false;
+
+	if (!list_empty(&dep->pending_list)) {
+		struct dwc3_request	*req;
+
+		req = next_request(&dep->pending_list);
+		if (!dwc->connected)
+			dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
+		else
+			dwc3_gadget_giveback(dep, req, -ECONNRESET);
+	}
+
+	dwc->eps[0]->trb_enqueue = 0;
+	dwc->eps[1]->trb_enqueue = 0;
+	dwc->ep0state = EP0_SETUP_PHASE;
+	dwc3_ep0_out_start(dwc);
+}
+
+int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
+{
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+
+	dwc3_ep0_stall_and_restart(dwc);
+
+	return 0;
+}
+
+int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
+{
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+	unsigned long			flags;
+	int				ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	ret = __dwc3_gadget_ep0_set_halt(ep, value);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+void dwc3_ep0_out_start(struct dwc3 *dwc)
+{
+	struct dwc3_ep			*dep;
+	int				ret;
+	int                             i;
+
+	complete(&dwc->ep0_in_setup);
+
+	dep = dwc->eps[0];
+	dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 8,
+			DWC3_TRBCTL_CONTROL_SETUP, false);
+	ret = dwc3_ep0_start_trans(dep);
+	WARN_ON(ret < 0);
+	for (i = 2; i < DWC3_ENDPOINTS_NUM; i++) {
+		struct dwc3_ep *dwc3_ep;
+
+		dwc3_ep = dwc->eps[i];
+		if (!dwc3_ep)
+			continue;
+
+		if (!(dwc3_ep->flags & DWC3_EP_DELAY_STOP))
+			continue;
+
+		dwc3_ep->flags &= ~DWC3_EP_DELAY_STOP;
+		if (dwc->connected)
+			dwc3_stop_active_transfer(dwc3_ep, true, true);
+		else
+			dwc3_remove_requests(dwc, dwc3_ep, -ESHUTDOWN);
+	}
+}
+
+static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
+{
+	struct dwc3_ep		*dep;
+	u32			windex = le16_to_cpu(wIndex_le);
+	u32			epnum;
+
+	epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1;
+	if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
+		epnum |= 1;
+
+	dep = dwc->eps[epnum];
+	if (dep == NULL)
+		return NULL;
+
+	if (dep->flags & DWC3_EP_ENABLED)
+		return dep;
+
+	return NULL;
+}
+
+static void dwc3_ep0_status_cmpl(struct usb_ep *ep, struct usb_request *req)
+{
+}
+/*
+ * ch 9.4.5
+ */
+static int dwc3_ep0_handle_status(struct dwc3 *dwc,
+		struct usb_ctrlrequest *ctrl)
+{
+	struct dwc3_ep		*dep;
+	u32			recip;
+	u32			value;
+	u32			reg;
+	u16			usb_status = 0;
+	__le16			*response_pkt;
+
+	/* We don't support PTM_STATUS */
+	value = le16_to_cpu(ctrl->wValue);
+	if (value != 0)
+		return -EINVAL;
+
+	recip = ctrl->bRequestType & USB_RECIP_MASK;
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		/*
+		 * LTM will be set once we know how to set this in HW.
+		 */
+		usb_status |= dwc->gadget->is_selfpowered;
+
+		if ((dwc->speed == DWC3_DSTS_SUPERSPEED) ||
+		    (dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
+			reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+			if (reg & DWC3_DCTL_INITU1ENA)
+				usb_status |= 1 << USB_DEV_STAT_U1_ENABLED;
+			if (reg & DWC3_DCTL_INITU2ENA)
+				usb_status |= 1 << USB_DEV_STAT_U2_ENABLED;
+		}
+
+		break;
+
+	case USB_RECIP_INTERFACE:
+		/*
+		 * Function Remote Wake Capable	D0
+		 * Function Remote Wakeup	D1
+		 */
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
+		if (!dep)
+			return -EINVAL;
+
+		if (dep->flags & DWC3_EP_STALL)
+			usb_status = 1 << USB_ENDPOINT_HALT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	response_pkt = (__le16 *) dwc->setup_buf;
+	*response_pkt = cpu_to_le16(usb_status);
+
+	dep = dwc->eps[0];
+	dwc->ep0_usb_req.dep = dep;
+	dwc->ep0_usb_req.request.length = sizeof(*response_pkt);
+	dwc->ep0_usb_req.request.buf = dwc->setup_buf;
+	dwc->ep0_usb_req.request.complete = dwc3_ep0_status_cmpl;
+
+	return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
+}
+
+static int dwc3_ep0_handle_u1(struct dwc3 *dwc, enum usb_device_state state,
+		int set)
+{
+	u32 reg;
+
+	if (state != USB_STATE_CONFIGURED)
+		return -EINVAL;
+	if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
+			(dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
+		return -EINVAL;
+	if (set && dwc->dis_u1_entry_quirk)
+		return -EINVAL;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	if (set)
+		reg |= DWC3_DCTL_INITU1ENA;
+	else
+		reg &= ~DWC3_DCTL_INITU1ENA;
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+	return 0;
+}
+
+static int dwc3_ep0_handle_u2(struct dwc3 *dwc, enum usb_device_state state,
+		int set)
+{
+	u32 reg;
+
+
+	if (state != USB_STATE_CONFIGURED)
+		return -EINVAL;
+	if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
+			(dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
+		return -EINVAL;
+	if (set && dwc->dis_u2_entry_quirk)
+		return -EINVAL;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	if (set)
+		reg |= DWC3_DCTL_INITU2ENA;
+	else
+		reg &= ~DWC3_DCTL_INITU2ENA;
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+	return 0;
+}
+
+static int dwc3_ep0_handle_test(struct dwc3 *dwc, enum usb_device_state state,
+		u32 wIndex, int set)
+{
+	if ((wIndex & 0xff) != 0)
+		return -EINVAL;
+	if (!set)
+		return -EINVAL;
+
+	switch (wIndex >> 8) {
+	case USB_TEST_J:
+	case USB_TEST_K:
+	case USB_TEST_SE0_NAK:
+	case USB_TEST_PACKET:
+	case USB_TEST_FORCE_ENABLE:
+		dwc->test_mode_nr = wIndex >> 8;
+		dwc->test_mode = true;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int dwc3_ep0_handle_device(struct dwc3 *dwc,
+		struct usb_ctrlrequest *ctrl, int set)
+{
+	enum usb_device_state	state;
+	u32			wValue;
+	u32			wIndex;
+	int			ret = 0;
+
+	wValue = le16_to_cpu(ctrl->wValue);
+	wIndex = le16_to_cpu(ctrl->wIndex);
+	state = dwc->gadget->state;
+
+	switch (wValue) {
+	case USB_DEVICE_REMOTE_WAKEUP:
+		break;
+	/*
+	 * 9.4.1 says only for SS, in AddressState only for
+	 * default control pipe
+	 */
+	case USB_DEVICE_U1_ENABLE:
+		ret = dwc3_ep0_handle_u1(dwc, state, set);
+		break;
+	case USB_DEVICE_U2_ENABLE:
+		ret = dwc3_ep0_handle_u2(dwc, state, set);
+		break;
+	case USB_DEVICE_LTM_ENABLE:
+		ret = -EINVAL;
+		break;
+	case USB_DEVICE_TEST_MODE:
+		ret = dwc3_ep0_handle_test(dwc, state, wIndex, set);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int dwc3_ep0_handle_intf(struct dwc3 *dwc,
+		struct usb_ctrlrequest *ctrl, int set)
+{
+	u32			wValue;
+	int			ret = 0;
+
+	wValue = le16_to_cpu(ctrl->wValue);
+
+	switch (wValue) {
+	case USB_INTRF_FUNC_SUSPEND:
+		/*
+		 * REVISIT: Ideally we would enable some low power mode here,
+		 * however it's unclear what we should be doing here.
+		 *
+		 * For now, we're not doing anything, just making sure we return
+		 * 0 so USB Command Verifier tests pass without any errors.
+		 */
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int dwc3_ep0_handle_endpoint(struct dwc3 *dwc,
+		struct usb_ctrlrequest *ctrl, int set)
+{
+	struct dwc3_ep		*dep;
+	u32			wValue;
+	int			ret;
+
+	wValue = le16_to_cpu(ctrl->wValue);
+
+	switch (wValue) {
+	case USB_ENDPOINT_HALT:
+		dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
+		if (!dep)
+			return -EINVAL;
+
+		if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
+			break;
+
+		ret = __dwc3_gadget_ep_set_halt(dep, set, true);
+		if (ret)
+			return -EINVAL;
+
+		/* ClearFeature(Halt) may need delayed status */
+		if (!set && (dep->flags & DWC3_EP_END_TRANSFER_PENDING))
+			return USB_GADGET_DELAYED_STATUS;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
+		struct usb_ctrlrequest *ctrl, int set)
+{
+	u32			recip;
+	int			ret;
+
+	recip = ctrl->bRequestType & USB_RECIP_MASK;
+
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		ret = dwc3_ep0_handle_device(dwc, ctrl, set);
+		break;
+	case USB_RECIP_INTERFACE:
+		ret = dwc3_ep0_handle_intf(dwc, ctrl, set);
+		break;
+	case USB_RECIP_ENDPOINT:
+		ret = dwc3_ep0_handle_endpoint(dwc, ctrl, set);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	enum usb_device_state state = dwc->gadget->state;
+	u32 addr;
+	u32 reg;
+
+	addr = le16_to_cpu(ctrl->wValue);
+	if (addr > 127) {
+		dev_err(dwc->dev, "invalid device address %d\n", addr);
+		return -EINVAL;
+	}
+
+	if (state == USB_STATE_CONFIGURED) {
+		dev_err(dwc->dev, "can't SetAddress() from Configured State\n");
+		return -EINVAL;
+	}
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+	reg &= ~(DWC3_DCFG_DEVADDR_MASK);
+	reg |= DWC3_DCFG_DEVADDR(addr);
+	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+
+	if (addr)
+		usb_gadget_set_state(dwc->gadget, USB_STATE_ADDRESS);
+	else
+		usb_gadget_set_state(dwc->gadget, USB_STATE_DEFAULT);
+
+	return 0;
+}
+
+static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	int ret = -EINVAL;
+
+	if (dwc->async_callbacks) {
+		spin_unlock(&dwc->lock);
+		ret = dwc->gadget_driver->setup(dwc->gadget, ctrl);
+		spin_lock(&dwc->lock);
+	}
+	return ret;
+}
+
+static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	enum usb_device_state state = dwc->gadget->state;
+	u32 cfg;
+	int ret;
+	u32 reg;
+
+	cfg = le16_to_cpu(ctrl->wValue);
+
+	switch (state) {
+	case USB_STATE_DEFAULT:
+		return -EINVAL;
+
+	case USB_STATE_ADDRESS:
+		dwc3_gadget_clear_tx_fifos(dwc);
+
+		ret = dwc3_ep0_delegate_req(dwc, ctrl);
+		/* if the cfg matches and the cfg is non zero */
+		if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) {
+
+			/*
+			 * only change state if set_config has already
+			 * been processed. If gadget driver returns
+			 * USB_GADGET_DELAYED_STATUS, we will wait
+			 * to change the state on the next usb_ep_queue()
+			 */
+			if (ret == 0)
+				usb_gadget_set_state(dwc->gadget,
+						USB_STATE_CONFIGURED);
+
+			/*
+			 * Enable transition to U1/U2 state when
+			 * nothing is pending from application.
+			 */
+			reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+			if (!dwc->dis_u1_entry_quirk)
+				reg |= DWC3_DCTL_ACCEPTU1ENA;
+			if (!dwc->dis_u2_entry_quirk)
+				reg |= DWC3_DCTL_ACCEPTU2ENA;
+			dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+		}
+		break;
+
+	case USB_STATE_CONFIGURED:
+		ret = dwc3_ep0_delegate_req(dwc, ctrl);
+		if (!cfg && !ret)
+			usb_gadget_set_state(dwc->gadget,
+					USB_STATE_ADDRESS);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
+{
+	struct dwc3_ep	*dep = to_dwc3_ep(ep);
+	struct dwc3	*dwc = dep->dwc;
+
+	u32		param = 0;
+	u32		reg;
+
+	struct timing {
+		u8	u1sel;
+		u8	u1pel;
+		__le16	u2sel;
+		__le16	u2pel;
+	} __packed timing;
+
+	int		ret;
+
+	memcpy(&timing, req->buf, sizeof(timing));
+
+	dwc->u1sel = timing.u1sel;
+	dwc->u1pel = timing.u1pel;
+	dwc->u2sel = le16_to_cpu(timing.u2sel);
+	dwc->u2pel = le16_to_cpu(timing.u2pel);
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	if (reg & DWC3_DCTL_INITU2ENA)
+		param = dwc->u2pel;
+	if (reg & DWC3_DCTL_INITU1ENA)
+		param = dwc->u1pel;
+
+	/*
+	 * According to Synopsys Databook, if parameter is
+	 * greater than 125, a value of zero should be
+	 * programmed in the register.
+	 */
+	if (param > 125)
+		param = 0;
+
+	/* now that we have the time, issue DGCMD Set Sel */
+	ret = dwc3_send_gadget_generic_command(dwc,
+			DWC3_DGCMD_SET_PERIODIC_PAR, param);
+	WARN_ON(ret < 0);
+}
+
+static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	struct dwc3_ep	*dep;
+	enum usb_device_state state = dwc->gadget->state;
+	u16		wLength;
+
+	if (state == USB_STATE_DEFAULT)
+		return -EINVAL;
+
+	wLength = le16_to_cpu(ctrl->wLength);
+
+	if (wLength != 6) {
+		dev_err(dwc->dev, "Set SEL should be 6 bytes, got %d\n",
+				wLength);
+		return -EINVAL;
+	}
+
+	/*
+	 * To handle Set SEL we need to receive 6 bytes from Host. So let's
+	 * queue a usb_request for 6 bytes.
+	 *
+	 * Remember, though, this controller can't handle non-wMaxPacketSize
+	 * aligned transfers on the OUT direction, so we queue a request for
+	 * wMaxPacketSize instead.
+	 */
+	dep = dwc->eps[0];
+	dwc->ep0_usb_req.dep = dep;
+	dwc->ep0_usb_req.request.length = dep->endpoint.maxpacket;
+	dwc->ep0_usb_req.request.buf = dwc->setup_buf;
+	dwc->ep0_usb_req.request.complete = dwc3_ep0_set_sel_cmpl;
+
+	return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
+}
+
+static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	u16		wLength;
+	u16		wValue;
+	u16		wIndex;
+
+	wValue = le16_to_cpu(ctrl->wValue);
+	wLength = le16_to_cpu(ctrl->wLength);
+	wIndex = le16_to_cpu(ctrl->wIndex);
+
+	if (wIndex || wLength)
+		return -EINVAL;
+
+	dwc->gadget->isoch_delay = wValue;
+
+	return 0;
+}
+
+static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	int ret;
+
+	switch (ctrl->bRequest) {
+	case USB_REQ_GET_STATUS:
+		ret = dwc3_ep0_handle_status(dwc, ctrl);
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+		ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
+		break;
+	case USB_REQ_SET_FEATURE:
+		ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
+		break;
+	case USB_REQ_SET_ADDRESS:
+		ret = dwc3_ep0_set_address(dwc, ctrl);
+		break;
+	case USB_REQ_SET_CONFIGURATION:
+		ret = dwc3_ep0_set_config(dwc, ctrl);
+		break;
+	case USB_REQ_SET_SEL:
+		ret = dwc3_ep0_set_sel(dwc, ctrl);
+		break;
+	case USB_REQ_SET_ISOCH_DELAY:
+		ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
+		break;
+	default:
+		ret = dwc3_ep0_delegate_req(dwc, ctrl);
+		break;
+	}
+
+	return ret;
+}
+
+static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	struct usb_ctrlrequest *ctrl = (void *) dwc->ep0_trb;
+	int ret = -EINVAL;
+	u32 len;
+
+	if (!dwc->gadget_driver || !dwc->softconnect || !dwc->connected)
+		goto out;
+
+	trace_dwc3_ctrl_req(ctrl);
+
+	len = le16_to_cpu(ctrl->wLength);
+	if (!len) {
+		dwc->three_stage_setup = false;
+		dwc->ep0_expect_in = false;
+		dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
+	} else {
+		dwc->three_stage_setup = true;
+		dwc->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN);
+		dwc->ep0_next_event = DWC3_EP0_NRDY_DATA;
+	}
+
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+		ret = dwc3_ep0_std_request(dwc, ctrl);
+	else
+		ret = dwc3_ep0_delegate_req(dwc, ctrl);
+
+	if (ret == USB_GADGET_DELAYED_STATUS)
+		dwc->delayed_status = true;
+
+out:
+	if (ret < 0)
+		dwc3_ep0_stall_and_restart(dwc);
+}
+
+static void dwc3_ep0_complete_data(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	struct dwc3_request	*r;
+	struct usb_request	*ur;
+	struct dwc3_trb		*trb;
+	struct dwc3_ep		*ep0;
+	u32			transferred = 0;
+	u32			status;
+	u32			length;
+	u8			epnum;
+
+	epnum = event->endpoint_number;
+	ep0 = dwc->eps[0];
+
+	dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
+	trb = dwc->ep0_trb;
+	trace_dwc3_complete_trb(ep0, trb);
+
+	r = next_request(&ep0->pending_list);
+	if (!r)
+		return;
+
+	status = DWC3_TRB_SIZE_TRBSTS(trb->size);
+	if (status == DWC3_TRBSTS_SETUP_PENDING) {
+		dwc->setup_packet_pending = true;
+		if (r)
+			dwc3_gadget_giveback(ep0, r, -ECONNRESET);
+
+		return;
+	}
+
+	ur = &r->request;
+
+	length = trb->size & DWC3_TRB_SIZE_MASK;
+	transferred = ur->length - length;
+	ur->actual += transferred;
+
+	if ((IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) &&
+	     ur->length && ur->zero) || dwc->ep0_bounced) {
+		trb++;
+		trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+		trace_dwc3_complete_trb(ep0, trb);
+
+		if (r->direction)
+			dwc->eps[1]->trb_enqueue = 0;
+		else
+			dwc->eps[0]->trb_enqueue = 0;
+
+		dwc->ep0_bounced = false;
+	}
+
+	if ((epnum & 1) && ur->actual < ur->length)
+		dwc3_ep0_stall_and_restart(dwc);
+	else
+		dwc3_gadget_giveback(ep0, r, 0);
+}
+
+static void dwc3_ep0_complete_status(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	struct dwc3_request	*r;
+	struct dwc3_ep		*dep;
+	struct dwc3_trb		*trb;
+	u32			status;
+
+	dep = dwc->eps[0];
+	trb = dwc->ep0_trb;
+
+	trace_dwc3_complete_trb(dep, trb);
+
+	if (!list_empty(&dep->pending_list)) {
+		r = next_request(&dep->pending_list);
+
+		dwc3_gadget_giveback(dep, r, 0);
+	}
+
+	if (dwc->test_mode) {
+		int ret;
+
+		ret = dwc3_gadget_set_test_mode(dwc, dwc->test_mode_nr);
+		if (ret < 0) {
+			dev_err(dwc->dev, "invalid test #%d\n",
+					dwc->test_mode_nr);
+			dwc3_ep0_stall_and_restart(dwc);
+			return;
+		}
+	}
+
+	status = DWC3_TRB_SIZE_TRBSTS(trb->size);
+	if (status == DWC3_TRBSTS_SETUP_PENDING)
+		dwc->setup_packet_pending = true;
+
+	dwc->ep0state = EP0_SETUP_PHASE;
+	dwc3_ep0_out_start(dwc);
+}
+
+static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
+			const struct dwc3_event_depevt *event)
+{
+	struct dwc3_ep		*dep = dwc->eps[event->endpoint_number];
+
+	dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
+	dep->resource_index = 0;
+	dwc->setup_packet_pending = false;
+
+	switch (dwc->ep0state) {
+	case EP0_SETUP_PHASE:
+		dwc3_ep0_inspect_setup(dwc, event);
+		break;
+
+	case EP0_DATA_PHASE:
+		dwc3_ep0_complete_data(dwc, event);
+		break;
+
+	case EP0_STATUS_PHASE:
+		dwc3_ep0_complete_status(dwc, event);
+		break;
+	default:
+		WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state);
+	}
+}
+
+static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
+		struct dwc3_ep *dep, struct dwc3_request *req)
+{
+	unsigned int		trb_length = 0;
+	int			ret;
+
+	req->direction = !!dep->number;
+
+	if (req->request.length == 0) {
+		if (!req->direction)
+			trb_length = dep->endpoint.maxpacket;
+
+		dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, trb_length,
+				DWC3_TRBCTL_CONTROL_DATA, false);
+		ret = dwc3_ep0_start_trans(dep);
+	} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
+			&& (dep->number == 0)) {
+		u32	maxpacket;
+		u32	rem;
+
+		ret = usb_gadget_map_request_by_dev(dwc->sysdev,
+				&req->request, dep->number);
+		if (ret)
+			return;
+
+		maxpacket = dep->endpoint.maxpacket;
+		rem = req->request.length % maxpacket;
+		dwc->ep0_bounced = true;
+
+		/* prepare normal TRB */
+		dwc3_ep0_prepare_one_trb(dep, req->request.dma,
+					 req->request.length,
+					 DWC3_TRBCTL_CONTROL_DATA,
+					 true);
+
+		req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
+
+		/* Now prepare one extra TRB to align transfer size */
+		dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
+					 maxpacket - rem,
+					 DWC3_TRBCTL_CONTROL_DATA,
+					 false);
+		ret = dwc3_ep0_start_trans(dep);
+	} else if (IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) &&
+		   req->request.length && req->request.zero) {
+
+		ret = usb_gadget_map_request_by_dev(dwc->sysdev,
+				&req->request, dep->number);
+		if (ret)
+			return;
+
+		/* prepare normal TRB */
+		dwc3_ep0_prepare_one_trb(dep, req->request.dma,
+					 req->request.length,
+					 DWC3_TRBCTL_CONTROL_DATA,
+					 true);
+
+		req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
+
+		if (!req->direction)
+			trb_length = dep->endpoint.maxpacket;
+
+		/* Now prepare one extra TRB to align transfer size */
+		dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
+					 trb_length, DWC3_TRBCTL_CONTROL_DATA,
+					 false);
+		ret = dwc3_ep0_start_trans(dep);
+	} else {
+		ret = usb_gadget_map_request_by_dev(dwc->sysdev,
+				&req->request, dep->number);
+		if (ret)
+			return;
+
+		dwc3_ep0_prepare_one_trb(dep, req->request.dma,
+				req->request.length, DWC3_TRBCTL_CONTROL_DATA,
+				false);
+
+		req->trb = &dwc->ep0_trb[dep->trb_enqueue];
+
+		ret = dwc3_ep0_start_trans(dep);
+	}
+
+	WARN_ON(ret < 0);
+}
+
+static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
+{
+	struct dwc3		*dwc = dep->dwc;
+	u32			type;
+
+	type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
+		: DWC3_TRBCTL_CONTROL_STATUS2;
+
+	dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0, type, false);
+	return dwc3_ep0_start_trans(dep);
+}
+
+static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
+{
+	WARN_ON(dwc3_ep0_start_control_status(dep));
+}
+
+static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	struct dwc3_ep		*dep = dwc->eps[event->endpoint_number];
+
+	__dwc3_ep0_do_control_status(dwc, dep);
+}
+
+void dwc3_ep0_send_delayed_status(struct dwc3 *dwc)
+{
+	unsigned int direction = !dwc->ep0_expect_in;
+
+	dwc->delayed_status = false;
+	dwc->clear_stall_protocol = 0;
+
+	if (dwc->ep0state != EP0_STATUS_PHASE)
+		return;
+
+	__dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
+}
+
+void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+	u32			cmd;
+	int			ret;
+
+	/*
+	 * For status/DATA OUT stage, TRB will be queued on ep0 out
+	 * endpoint for which resource index is zero. Hence allow
+	 * queuing ENDXFER command for ep0 out endpoint.
+	 */
+	if (!dep->resource_index && dep->number)
+		return;
+
+	cmd = DWC3_DEPCMD_ENDTRANSFER;
+	cmd |= DWC3_DEPCMD_CMDIOC;
+	cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
+	memset(&params, 0, sizeof(params));
+	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
+	WARN_ON_ONCE(ret);
+	dep->resource_index = 0;
+}
+
+static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	switch (event->status) {
+	case DEPEVT_STATUS_CONTROL_DATA:
+		if (!dwc->softconnect || !dwc->connected)
+			return;
+		/*
+		 * We already have a DATA transfer in the controller's cache,
+		 * if we receive a XferNotReady(DATA) we will ignore it, unless
+		 * it's for the wrong direction.
+		 *
+		 * In that case, we must issue END_TRANSFER command to the Data
+		 * Phase we already have started and issue SetStall on the
+		 * control endpoint.
+		 */
+		if (dwc->ep0_expect_in != event->endpoint_number) {
+			struct dwc3_ep	*dep = dwc->eps[dwc->ep0_expect_in];
+
+			dev_err(dwc->dev, "unexpected direction for Data Phase\n");
+			dwc3_ep0_end_control_data(dwc, dep);
+			dwc3_ep0_stall_and_restart(dwc);
+			return;
+		}
+
+		break;
+
+	case DEPEVT_STATUS_CONTROL_STATUS:
+		if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS)
+			return;
+
+		if (dwc->setup_packet_pending) {
+			dwc3_ep0_stall_and_restart(dwc);
+			return;
+		}
+
+		dwc->ep0state = EP0_STATUS_PHASE;
+
+		if (dwc->delayed_status) {
+			struct dwc3_ep *dep = dwc->eps[0];
+
+			WARN_ON_ONCE(event->endpoint_number != 1);
+			/*
+			 * We should handle the delay STATUS phase here if the
+			 * request for handling delay STATUS has been queued
+			 * into the list.
+			 */
+			if (!list_empty(&dep->pending_list)) {
+				dwc->delayed_status = false;
+				usb_gadget_set_state(dwc->gadget,
+						     USB_STATE_CONFIGURED);
+				dwc3_ep0_do_control_status(dwc, event);
+			}
+
+			return;
+		}
+
+		dwc3_ep0_do_control_status(dwc, event);
+	}
+}
+
+void dwc3_ep0_interrupt(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	struct dwc3_ep	*dep = dwc->eps[event->endpoint_number];
+	u8		cmd;
+
+	switch (event->endpoint_event) {
+	case DWC3_DEPEVT_XFERCOMPLETE:
+		dwc3_ep0_xfer_complete(dwc, event);
+		break;
+
+	case DWC3_DEPEVT_XFERNOTREADY:
+		dwc3_ep0_xfernotready(dwc, event);
+		break;
+
+	case DWC3_DEPEVT_XFERINPROGRESS:
+	case DWC3_DEPEVT_RXTXFIFOEVT:
+	case DWC3_DEPEVT_STREAMEVT:
+		break;
+	case DWC3_DEPEVT_EPCMDCMPLT:
+		cmd = DEPEVT_PARAMETER_CMD(event->parameters);
+
+		if (cmd == DWC3_DEPCMD_ENDTRANSFER) {
+			dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
+			dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
+		}
+		break;
+	}
+}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
new file mode 100644
index 000000000..c4703f6b2
--- /dev/null
+++ b/drivers/usb/dwc3/gadget.c
@@ -0,0 +1,4628 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "debug.h"
+#include "core.h"
+#include "gadget.h"
+#include "io.h"
+
+#define DWC3_ALIGN_FRAME(d, n)	(((d)->frame_number + ((d)->interval * (n))) \
+					& ~((d)->interval - 1))
+
+/**
+ * dwc3_gadget_set_test_mode - enables usb2 test modes
+ * @dwc: pointer to our context structure
+ * @mode: the mode to set (J, K SE0 NAK, Force Enable)
+ *
+ * Caller should take care of locking. This function will return 0 on
+ * success or -EINVAL if wrong Test Selector is passed.
+ */
+int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
+{
+	u32		reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	reg &= ~DWC3_DCTL_TSTCTRL_MASK;
+
+	switch (mode) {
+	case USB_TEST_J:
+	case USB_TEST_K:
+	case USB_TEST_SE0_NAK:
+	case USB_TEST_PACKET:
+	case USB_TEST_FORCE_ENABLE:
+		reg |= mode << 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dwc3_gadget_dctl_write_safe(dwc, reg);
+
+	return 0;
+}
+
+/**
+ * dwc3_gadget_get_link_state - gets current state of usb link
+ * @dwc: pointer to our context structure
+ *
+ * Caller should take care of locking. This function will
+ * return the link state on success (>= 0) or -ETIMEDOUT.
+ */
+int dwc3_gadget_get_link_state(struct dwc3 *dwc)
+{
+	u32		reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+
+	return DWC3_DSTS_USBLNKST(reg);
+}
+
+/**
+ * dwc3_gadget_set_link_state - sets usb link to a particular state
+ * @dwc: pointer to our context structure
+ * @state: the state to put link into
+ *
+ * Caller should take care of locking. This function will
+ * return 0 on success or -ETIMEDOUT.
+ */
+int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
+{
+	int		retries = 10000;
+	u32		reg;
+
+	/*
+	 * Wait until device controller is ready. Only applies to 1.94a and
+	 * later RTL.
+	 */
+	if (!DWC3_VER_IS_PRIOR(DWC3, 194A)) {
+		while (--retries) {
+			reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+			if (reg & DWC3_DSTS_DCNRD)
+				udelay(5);
+			else
+				break;
+		}
+
+		if (retries <= 0)
+			return -ETIMEDOUT;
+	}
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
+
+	/* set no action before sending new link state change */
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+	/* set requested state */
+	reg |= DWC3_DCTL_ULSTCHNGREQ(state);
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+	/*
+	 * The following code is racy when called from dwc3_gadget_wakeup,
+	 * and is not needed, at least on newer versions
+	 */
+	if (!DWC3_VER_IS_PRIOR(DWC3, 194A))
+		return 0;
+
+	/* wait for a change in DSTS */
+	retries = 10000;
+	while (--retries) {
+		reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+
+		if (DWC3_DSTS_USBLNKST(reg) == state)
+			return 0;
+
+		udelay(5);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static void dwc3_ep0_reset_state(struct dwc3 *dwc)
+{
+	unsigned int	dir;
+
+	if (dwc->ep0state != EP0_SETUP_PHASE) {
+		dir = !!dwc->ep0_expect_in;
+		if (dwc->ep0state == EP0_DATA_PHASE)
+			dwc3_ep0_end_control_data(dwc, dwc->eps[dir]);
+		else
+			dwc3_ep0_end_control_data(dwc, dwc->eps[!dir]);
+
+		dwc->eps[0]->trb_enqueue = 0;
+		dwc->eps[1]->trb_enqueue = 0;
+
+		dwc3_ep0_stall_and_restart(dwc);
+	}
+}
+
+/**
+ * dwc3_ep_inc_trb - increment a trb index.
+ * @index: Pointer to the TRB index to increment.
+ *
+ * The index should never point to the link TRB. After incrementing,
+ * if it is point to the link TRB, wrap around to the beginning. The
+ * link TRB is always at the last TRB entry.
+ */
+static void dwc3_ep_inc_trb(u8 *index)
+{
+	(*index)++;
+	if (*index == (DWC3_TRB_NUM - 1))
+		*index = 0;
+}
+
+/**
+ * dwc3_ep_inc_enq - increment endpoint's enqueue pointer
+ * @dep: The endpoint whose enqueue pointer we're incrementing
+ */
+static void dwc3_ep_inc_enq(struct dwc3_ep *dep)
+{
+	dwc3_ep_inc_trb(&dep->trb_enqueue);
+}
+
+/**
+ * dwc3_ep_inc_deq - increment endpoint's dequeue pointer
+ * @dep: The endpoint whose enqueue pointer we're incrementing
+ */
+static void dwc3_ep_inc_deq(struct dwc3_ep *dep)
+{
+	dwc3_ep_inc_trb(&dep->trb_dequeue);
+}
+
+static void dwc3_gadget_del_and_unmap_request(struct dwc3_ep *dep,
+		struct dwc3_request *req, int status)
+{
+	struct dwc3			*dwc = dep->dwc;
+
+	list_del(&req->list);
+	req->remaining = 0;
+	req->needs_extra_trb = false;
+	req->num_trbs = 0;
+
+	if (req->request.status == -EINPROGRESS)
+		req->request.status = status;
+
+	if (req->trb)
+		usb_gadget_unmap_request_by_dev(dwc->sysdev,
+				&req->request, req->direction);
+
+	req->trb = NULL;
+	trace_dwc3_gadget_giveback(req);
+
+	if (dep->number > 1)
+		pm_runtime_put(dwc->dev);
+}
+
+/**
+ * dwc3_gadget_giveback - call struct usb_request's ->complete callback
+ * @dep: The endpoint to whom the request belongs to
+ * @req: The request we're giving back
+ * @status: completion code for the request
+ *
+ * Must be called with controller's lock held and interrupts disabled. This
+ * function will unmap @req and call its ->complete() callback to notify upper
+ * layers that it has completed.
+ */
+void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
+		int status)
+{
+	struct dwc3			*dwc = dep->dwc;
+
+	dwc3_gadget_del_and_unmap_request(dep, req, status);
+	req->status = DWC3_REQUEST_STATUS_COMPLETED;
+
+	spin_unlock(&dwc->lock);
+	usb_gadget_giveback_request(&dep->endpoint, &req->request);
+	spin_lock(&dwc->lock);
+}
+
+/**
+ * dwc3_send_gadget_generic_command - issue a generic command for the controller
+ * @dwc: pointer to the controller context
+ * @cmd: the command to be issued
+ * @param: command parameter
+ *
+ * Caller should take care of locking. Issue @cmd with a given @param to @dwc
+ * and wait for its completion.
+ */
+int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd,
+		u32 param)
+{
+	u32		timeout = 500;
+	int		status = 0;
+	int		ret = 0;
+	u32		reg;
+
+	dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param);
+	dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT);
+
+	do {
+		reg = dwc3_readl(dwc->regs, DWC3_DGCMD);
+		if (!(reg & DWC3_DGCMD_CMDACT)) {
+			status = DWC3_DGCMD_STATUS(reg);
+			if (status)
+				ret = -EINVAL;
+			break;
+		}
+	} while (--timeout);
+
+	if (!timeout) {
+		ret = -ETIMEDOUT;
+		status = -ETIMEDOUT;
+	}
+
+	trace_dwc3_gadget_generic_cmd(cmd, param, status);
+
+	return ret;
+}
+
+static int __dwc3_gadget_wakeup(struct dwc3 *dwc);
+
+/**
+ * dwc3_send_gadget_ep_cmd - issue an endpoint command
+ * @dep: the endpoint to which the command is going to be issued
+ * @cmd: the command to be issued
+ * @params: parameters to the command
+ *
+ * Caller should handle locking. This function will issue @cmd with given
+ * @params to @dep and wait for its completion.
+ */
+int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
+		struct dwc3_gadget_ep_cmd_params *params)
+{
+	const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
+	struct dwc3		*dwc = dep->dwc;
+	u32			timeout = 5000;
+	u32			saved_config = 0;
+	u32			reg;
+
+	int			cmd_status = 0;
+	int			ret = -EINVAL;
+
+	/*
+	 * When operating in USB 2.0 speeds (HS/FS), if GUSB2PHYCFG.ENBLSLPM or
+	 * GUSB2PHYCFG.SUSPHY is set, it must be cleared before issuing an
+	 * endpoint command.
+	 *
+	 * Save and clear both GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY
+	 * settings. Restore them after the command is completed.
+	 *
+	 * DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section 3.2.2
+	 */
+	if (dwc->gadget->speed <= USB_SPEED_HIGH ||
+	    DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_ENDTRANSFER) {
+		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+		if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
+			saved_config |= DWC3_GUSB2PHYCFG_SUSPHY;
+			reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+		}
+
+		if (reg & DWC3_GUSB2PHYCFG_ENBLSLPM) {
+			saved_config |= DWC3_GUSB2PHYCFG_ENBLSLPM;
+			reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
+		}
+
+		if (saved_config)
+			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+	}
+
+	if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_STARTTRANSFER) {
+		int link_state;
+
+		/*
+		 * Initiate remote wakeup if the link state is in U3 when
+		 * operating in SS/SSP or L1/L2 when operating in HS/FS. If the
+		 * link state is in U1/U2, no remote wakeup is needed. The Start
+		 * Transfer command will initiate the link recovery.
+		 */
+		link_state = dwc3_gadget_get_link_state(dwc);
+		switch (link_state) {
+		case DWC3_LINK_STATE_U2:
+			if (dwc->gadget->speed >= USB_SPEED_SUPER)
+				break;
+
+			fallthrough;
+		case DWC3_LINK_STATE_U3:
+			ret = __dwc3_gadget_wakeup(dwc);
+			dev_WARN_ONCE(dwc->dev, ret, "wakeup failed --> %d\n",
+					ret);
+			break;
+		}
+	}
+
+	/*
+	 * For some commands such as Update Transfer command, DEPCMDPARn
+	 * registers are reserved. Since the driver often sends Update Transfer
+	 * command, don't write to DEPCMDPARn to avoid register write delays and
+	 * improve performance.
+	 */
+	if (DWC3_DEPCMD_CMD(cmd) != DWC3_DEPCMD_UPDATETRANSFER) {
+		dwc3_writel(dep->regs, DWC3_DEPCMDPAR0, params->param0);
+		dwc3_writel(dep->regs, DWC3_DEPCMDPAR1, params->param1);
+		dwc3_writel(dep->regs, DWC3_DEPCMDPAR2, params->param2);
+	}
+
+	/*
+	 * Synopsys Databook 2.60a states in section 6.3.2.5.6 of that if we're
+	 * not relying on XferNotReady, we can make use of a special "No
+	 * Response Update Transfer" command where we should clear both CmdAct
+	 * and CmdIOC bits.
+	 *
+	 * With this, we don't need to wait for command completion and can
+	 * straight away issue further commands to the endpoint.
+	 *
+	 * NOTICE: We're making an assumption that control endpoints will never
+	 * make use of Update Transfer command. This is a safe assumption
+	 * because we can never have more than one request at a time with
+	 * Control Endpoints. If anybody changes that assumption, this chunk
+	 * needs to be updated accordingly.
+	 */
+	if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_UPDATETRANSFER &&
+			!usb_endpoint_xfer_isoc(desc))
+		cmd &= ~(DWC3_DEPCMD_CMDIOC | DWC3_DEPCMD_CMDACT);
+	else
+		cmd |= DWC3_DEPCMD_CMDACT;
+
+	dwc3_writel(dep->regs, DWC3_DEPCMD, cmd);
+
+	if (!(cmd & DWC3_DEPCMD_CMDACT) ||
+		(DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_ENDTRANSFER &&
+		!(cmd & DWC3_DEPCMD_CMDIOC))) {
+		ret = 0;
+		goto skip_status;
+	}
+
+	do {
+		reg = dwc3_readl(dep->regs, DWC3_DEPCMD);
+		if (!(reg & DWC3_DEPCMD_CMDACT)) {
+			cmd_status = DWC3_DEPCMD_STATUS(reg);
+
+			switch (cmd_status) {
+			case 0:
+				ret = 0;
+				break;
+			case DEPEVT_TRANSFER_NO_RESOURCE:
+				dev_WARN(dwc->dev, "No resource for %s\n",
+					 dep->name);
+				ret = -EINVAL;
+				break;
+			case DEPEVT_TRANSFER_BUS_EXPIRY:
+				/*
+				 * SW issues START TRANSFER command to
+				 * isochronous ep with future frame interval. If
+				 * future interval time has already passed when
+				 * core receives the command, it will respond
+				 * with an error status of 'Bus Expiry'.
+				 *
+				 * Instead of always returning -EINVAL, let's
+				 * give a hint to the gadget driver that this is
+				 * the case by returning -EAGAIN.
+				 */
+				ret = -EAGAIN;
+				break;
+			default:
+				dev_WARN(dwc->dev, "UNKNOWN cmd status\n");
+			}
+
+			break;
+		}
+	} while (--timeout);
+
+	if (timeout == 0) {
+		ret = -ETIMEDOUT;
+		cmd_status = -ETIMEDOUT;
+	}
+
+skip_status:
+	trace_dwc3_gadget_ep_cmd(dep, cmd, params, cmd_status);
+
+	if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_STARTTRANSFER) {
+		if (ret == 0)
+			dep->flags |= DWC3_EP_TRANSFER_STARTED;
+
+		if (ret != -ETIMEDOUT)
+			dwc3_gadget_ep_get_transfer_index(dep);
+	}
+
+	if (saved_config) {
+		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+		reg |= saved_config;
+		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+	}
+
+	return ret;
+}
+
+static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep)
+{
+	struct dwc3 *dwc = dep->dwc;
+	struct dwc3_gadget_ep_cmd_params params;
+	u32 cmd = DWC3_DEPCMD_CLEARSTALL;
+
+	/*
+	 * As of core revision 2.60a the recommended programming model
+	 * is to set the ClearPendIN bit when issuing a Clear Stall EP
+	 * command for IN endpoints. This is to prevent an issue where
+	 * some (non-compliant) hosts may not send ACK TPs for pending
+	 * IN transfers due to a mishandled error condition. Synopsys
+	 * STAR 9000614252.
+	 */
+	if (dep->direction &&
+	    !DWC3_VER_IS_PRIOR(DWC3, 260A) &&
+	    (dwc->gadget->speed >= USB_SPEED_SUPER))
+		cmd |= DWC3_DEPCMD_CLEARPENDIN;
+
+	memset(&params, 0, sizeof(params));
+
+	return dwc3_send_gadget_ep_cmd(dep, cmd, &params);
+}
+
+static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
+		struct dwc3_trb *trb)
+{
+	u32		offset = (char *) trb - (char *) dep->trb_pool;
+
+	return dep->trb_pool_dma + offset;
+}
+
+static int dwc3_alloc_trb_pool(struct dwc3_ep *dep)
+{
+	struct dwc3		*dwc = dep->dwc;
+
+	if (dep->trb_pool)
+		return 0;
+
+	dep->trb_pool = dma_alloc_coherent(dwc->sysdev,
+			sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
+			&dep->trb_pool_dma, GFP_KERNEL);
+	if (!dep->trb_pool) {
+		dev_err(dep->dwc->dev, "failed to allocate trb pool for %s\n",
+				dep->name);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void dwc3_free_trb_pool(struct dwc3_ep *dep)
+{
+	struct dwc3		*dwc = dep->dwc;
+
+	dma_free_coherent(dwc->sysdev, sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
+			dep->trb_pool, dep->trb_pool_dma);
+
+	dep->trb_pool = NULL;
+	dep->trb_pool_dma = 0;
+}
+
+static int dwc3_gadget_set_xfer_resource(struct dwc3_ep *dep)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+
+	memset(&params, 0x00, sizeof(params));
+
+	params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1);
+
+	return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE,
+			&params);
+}
+
+/**
+ * dwc3_gadget_start_config - configure ep resources
+ * @dep: endpoint that is being enabled
+ *
+ * Issue a %DWC3_DEPCMD_DEPSTARTCFG command to @dep. After the command's
+ * completion, it will set Transfer Resource for all available endpoints.
+ *
+ * The assignment of transfer resources cannot perfectly follow the data book
+ * due to the fact that the controller driver does not have all knowledge of the
+ * configuration in advance. It is given this information piecemeal by the
+ * composite gadget framework after every SET_CONFIGURATION and
+ * SET_INTERFACE. Trying to follow the databook programming model in this
+ * scenario can cause errors. For two reasons:
+ *
+ * 1) The databook says to do %DWC3_DEPCMD_DEPSTARTCFG for every
+ * %USB_REQ_SET_CONFIGURATION and %USB_REQ_SET_INTERFACE (8.1.5). This is
+ * incorrect in the scenario of multiple interfaces.
+ *
+ * 2) The databook does not mention doing more %DWC3_DEPCMD_DEPXFERCFG for new
+ * endpoint on alt setting (8.1.6).
+ *
+ * The following simplified method is used instead:
+ *
+ * All hardware endpoints can be assigned a transfer resource and this setting
+ * will stay persistent until either a core reset or hibernation. So whenever we
+ * do a %DWC3_DEPCMD_DEPSTARTCFG(0) we can go ahead and do
+ * %DWC3_DEPCMD_DEPXFERCFG for every hardware endpoint as well. We are
+ * guaranteed that there are as many transfer resources as endpoints.
+ *
+ * This function is called for each endpoint when it is being enabled but is
+ * triggered only when called for EP0-out, which always happens first, and which
+ * should only happen in one of the above conditions.
+ */
+static int dwc3_gadget_start_config(struct dwc3_ep *dep)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+	struct dwc3		*dwc;
+	u32			cmd;
+	int			i;
+	int			ret;
+
+	if (dep->number)
+		return 0;
+
+	memset(&params, 0x00, sizeof(params));
+	cmd = DWC3_DEPCMD_DEPSTARTCFG;
+	dwc = dep->dwc;
+
+	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
+		struct dwc3_ep *dep = dwc->eps[i];
+
+		if (!dep)
+			continue;
+
+		ret = dwc3_gadget_set_xfer_resource(dep);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action)
+{
+	const struct usb_ss_ep_comp_descriptor *comp_desc;
+	const struct usb_endpoint_descriptor *desc;
+	struct dwc3_gadget_ep_cmd_params params;
+	struct dwc3 *dwc = dep->dwc;
+
+	comp_desc = dep->endpoint.comp_desc;
+	desc = dep->endpoint.desc;
+
+	memset(&params, 0x00, sizeof(params));
+
+	params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc))
+		| DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc));
+
+	/* Burst size is only needed in SuperSpeed mode */
+	if (dwc->gadget->speed >= USB_SPEED_SUPER) {
+		u32 burst = dep->endpoint.maxburst;
+
+		params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst - 1);
+	}
+
+	params.param0 |= action;
+	if (action == DWC3_DEPCFG_ACTION_RESTORE)
+		params.param2 |= dep->saved_state;
+
+	if (usb_endpoint_xfer_control(desc))
+		params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN;
+
+	if (dep->number <= 1 || usb_endpoint_xfer_isoc(desc))
+		params.param1 |= DWC3_DEPCFG_XFER_NOT_READY_EN;
+
+	if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) {
+		params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE
+			| DWC3_DEPCFG_XFER_COMPLETE_EN
+			| DWC3_DEPCFG_STREAM_EVENT_EN;
+		dep->stream_capable = true;
+	}
+
+	if (!usb_endpoint_xfer_control(desc))
+		params.param1 |= DWC3_DEPCFG_XFER_IN_PROGRESS_EN;
+
+	/*
+	 * We are doing 1:1 mapping for endpoints, meaning
+	 * Physical Endpoints 2 maps to Logical Endpoint 2 and
+	 * so on. We consider the direction bit as part of the physical
+	 * endpoint number. So USB endpoint 0x81 is 0x03.
+	 */
+	params.param1 |= DWC3_DEPCFG_EP_NUMBER(dep->number);
+
+	/*
+	 * We must use the lower 16 TX FIFOs even though
+	 * HW might have more
+	 */
+	if (dep->direction)
+		params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1);
+
+	if (desc->bInterval) {
+		u8 bInterval_m1;
+
+		/*
+		 * Valid range for DEPCFG.bInterval_m1 is from 0 to 13.
+		 *
+		 * NOTE: The programming guide incorrectly stated bInterval_m1
+		 * must be set to 0 when operating in fullspeed. Internally the
+		 * controller does not have this limitation. See DWC_usb3x
+		 * programming guide section 3.2.2.1.
+		 */
+		bInterval_m1 = min_t(u8, desc->bInterval - 1, 13);
+
+		if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT &&
+		    dwc->gadget->speed == USB_SPEED_FULL)
+			dep->interval = desc->bInterval;
+		else
+			dep->interval = 1 << (desc->bInterval - 1);
+
+		params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(bInterval_m1);
+	}
+
+	return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETEPCONFIG, &params);
+}
+
+/**
+ * dwc3_gadget_calc_tx_fifo_size - calculates the txfifo size value
+ * @dwc: pointer to the DWC3 context
+ * @mult: multiplier to be used when calculating the fifo_size
+ *
+ * Calculates the size value based on the equation below:
+ *
+ * DWC3 revision 280A and prior:
+ * fifo_size = mult * (max_packet / mdwidth) + 1;
+ *
+ * DWC3 revision 290A and onwards:
+ * fifo_size = mult * ((max_packet + mdwidth)/mdwidth + 1) + 1
+ *
+ * The max packet size is set to 1024, as the txfifo requirements mainly apply
+ * to super speed USB use cases.  However, it is safe to overestimate the fifo
+ * allocations for other scenarios, i.e. high speed USB.
+ */
+static int dwc3_gadget_calc_tx_fifo_size(struct dwc3 *dwc, int mult)
+{
+	int max_packet = 1024;
+	int fifo_size;
+	int mdwidth;
+
+	mdwidth = dwc3_mdwidth(dwc);
+
+	/* MDWIDTH is represented in bits, we need it in bytes */
+	mdwidth >>= 3;
+
+	if (DWC3_VER_IS_PRIOR(DWC3, 290A))
+		fifo_size = mult * (max_packet / mdwidth) + 1;
+	else
+		fifo_size = mult * ((max_packet + mdwidth) / mdwidth) + 1;
+	return fifo_size;
+}
+
+/**
+ * dwc3_gadget_clear_tx_fifos - Clears txfifo allocation
+ * @dwc: pointer to the DWC3 context
+ *
+ * Iterates through all the endpoint registers and clears the previous txfifo
+ * allocations.
+ */
+void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc)
+{
+	struct dwc3_ep *dep;
+	int fifo_depth;
+	int size;
+	int num;
+
+	if (!dwc->do_fifo_resize)
+		return;
+
+	/* Read ep0IN related TXFIFO size */
+	dep = dwc->eps[1];
+	size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(0));
+	if (DWC3_IP_IS(DWC3))
+		fifo_depth = DWC3_GTXFIFOSIZ_TXFDEP(size);
+	else
+		fifo_depth = DWC31_GTXFIFOSIZ_TXFDEP(size);
+
+	dwc->last_fifo_depth = fifo_depth;
+	/* Clear existing TXFIFO for all IN eps except ep0 */
+	for (num = 3; num < min_t(int, dwc->num_eps, DWC3_ENDPOINTS_NUM);
+	     num += 2) {
+		dep = dwc->eps[num];
+		/* Don't change TXFRAMNUM on usb31 version */
+		size = DWC3_IP_IS(DWC3) ? 0 :
+			dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(num >> 1)) &
+				   DWC31_GTXFIFOSIZ_TXFRAMNUM;
+
+		dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num >> 1), size);
+		dep->flags &= ~DWC3_EP_TXFIFO_RESIZED;
+	}
+	dwc->num_ep_resized = 0;
+}
+
+/*
+ * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case
+ * @dwc: pointer to our context structure
+ *
+ * This function will a best effort FIFO allocation in order
+ * to improve FIFO usage and throughput, while still allowing
+ * us to enable as many endpoints as possible.
+ *
+ * Keep in mind that this operation will be highly dependent
+ * on the configured size for RAM1 - which contains TxFifo -,
+ * the amount of endpoints enabled on coreConsultant tool, and
+ * the width of the Master Bus.
+ *
+ * In general, FIFO depths are represented with the following equation:
+ *
+ * fifo_size = mult * ((max_packet + mdwidth)/mdwidth + 1) + 1
+ *
+ * In conjunction with dwc3_gadget_check_config(), this resizing logic will
+ * ensure that all endpoints will have enough internal memory for one max
+ * packet per endpoint.
+ */
+static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep)
+{
+	struct dwc3 *dwc = dep->dwc;
+	int fifo_0_start;
+	int ram1_depth;
+	int fifo_size;
+	int min_depth;
+	int num_in_ep;
+	int remaining;
+	int num_fifos = 1;
+	int fifo;
+	int tmp;
+
+	if (!dwc->do_fifo_resize)
+		return 0;
+
+	/* resize IN endpoints except ep0 */
+	if (!usb_endpoint_dir_in(dep->endpoint.desc) || dep->number <= 1)
+		return 0;
+
+	/* bail if already resized */
+	if (dep->flags & DWC3_EP_TXFIFO_RESIZED)
+		return 0;
+
+	ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
+
+	if ((dep->endpoint.maxburst > 1 &&
+	     usb_endpoint_xfer_bulk(dep->endpoint.desc)) ||
+	    usb_endpoint_xfer_isoc(dep->endpoint.desc))
+		num_fifos = 3;
+
+	if (dep->endpoint.maxburst > 6 &&
+	    (usb_endpoint_xfer_bulk(dep->endpoint.desc) ||
+	     usb_endpoint_xfer_isoc(dep->endpoint.desc)) && DWC3_IP_IS(DWC31))
+		num_fifos = dwc->tx_fifo_resize_max_num;
+
+	/* FIFO size for a single buffer */
+	fifo = dwc3_gadget_calc_tx_fifo_size(dwc, 1);
+
+	/* Calculate the number of remaining EPs w/o any FIFO */
+	num_in_ep = dwc->max_cfg_eps;
+	num_in_ep -= dwc->num_ep_resized;
+
+	/* Reserve at least one FIFO for the number of IN EPs */
+	min_depth = num_in_ep * (fifo + 1);
+	remaining = ram1_depth - min_depth - dwc->last_fifo_depth;
+	remaining = max_t(int, 0, remaining);
+	/*
+	 * We've already reserved 1 FIFO per EP, so check what we can fit in
+	 * addition to it.  If there is not enough remaining space, allocate
+	 * all the remaining space to the EP.
+	 */
+	fifo_size = (num_fifos - 1) * fifo;
+	if (remaining < fifo_size)
+		fifo_size = remaining;
+
+	fifo_size += fifo;
+	/* Last increment according to the TX FIFO size equation */
+	fifo_size++;
+
+	/* Check if TXFIFOs start at non-zero addr */
+	tmp = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(0));
+	fifo_0_start = DWC3_GTXFIFOSIZ_TXFSTADDR(tmp);
+
+	fifo_size |= (fifo_0_start + (dwc->last_fifo_depth << 16));
+	if (DWC3_IP_IS(DWC3))
+		dwc->last_fifo_depth += DWC3_GTXFIFOSIZ_TXFDEP(fifo_size);
+	else
+		dwc->last_fifo_depth += DWC31_GTXFIFOSIZ_TXFDEP(fifo_size);
+
+	/* Check fifo size allocation doesn't exceed available RAM size. */
+	if (dwc->last_fifo_depth >= ram1_depth) {
+		dev_err(dwc->dev, "Fifosize(%d) > RAM size(%d) %s depth:%d\n",
+			dwc->last_fifo_depth, ram1_depth,
+			dep->endpoint.name, fifo_size);
+		if (DWC3_IP_IS(DWC3))
+			fifo_size = DWC3_GTXFIFOSIZ_TXFDEP(fifo_size);
+		else
+			fifo_size = DWC31_GTXFIFOSIZ_TXFDEP(fifo_size);
+
+		dwc->last_fifo_depth -= fifo_size;
+		return -ENOMEM;
+	}
+
+	dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1), fifo_size);
+	dep->flags |= DWC3_EP_TXFIFO_RESIZED;
+	dwc->num_ep_resized++;
+
+	return 0;
+}
+
+/**
+ * __dwc3_gadget_ep_enable - initializes a hw endpoint
+ * @dep: endpoint to be initialized
+ * @action: one of INIT, MODIFY or RESTORE
+ *
+ * Caller should take care of locking. Execute all necessary commands to
+ * initialize a HW endpoint so it can be used by a gadget driver.
+ */
+static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action)
+{
+	const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
+	struct dwc3		*dwc = dep->dwc;
+
+	u32			reg;
+	int			ret;
+
+	if (!(dep->flags & DWC3_EP_ENABLED)) {
+		ret = dwc3_gadget_resize_tx_fifos(dep);
+		if (ret)
+			return ret;
+
+		ret = dwc3_gadget_start_config(dep);
+		if (ret)
+			return ret;
+	}
+
+	ret = dwc3_gadget_set_ep_config(dep, action);
+	if (ret)
+		return ret;
+
+	if (!(dep->flags & DWC3_EP_ENABLED)) {
+		struct dwc3_trb	*trb_st_hw;
+		struct dwc3_trb	*trb_link;
+
+		dep->type = usb_endpoint_type(desc);
+		dep->flags |= DWC3_EP_ENABLED;
+
+		reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
+		reg |= DWC3_DALEPENA_EP(dep->number);
+		dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
+
+		dep->trb_dequeue = 0;
+		dep->trb_enqueue = 0;
+
+		if (usb_endpoint_xfer_control(desc))
+			goto out;
+
+		/* Initialize the TRB ring */
+		memset(dep->trb_pool, 0,
+		       sizeof(struct dwc3_trb) * DWC3_TRB_NUM);
+
+		/* Link TRB. The HWO bit is never reset */
+		trb_st_hw = &dep->trb_pool[0];
+
+		trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
+		trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
+		trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
+		trb_link->ctrl |= DWC3_TRBCTL_LINK_TRB;
+		trb_link->ctrl |= DWC3_TRB_CTRL_HWO;
+	}
+
+	/*
+	 * Issue StartTransfer here with no-op TRB so we can always rely on No
+	 * Response Update Transfer command.
+	 */
+	if (usb_endpoint_xfer_bulk(desc) ||
+			usb_endpoint_xfer_int(desc)) {
+		struct dwc3_gadget_ep_cmd_params params;
+		struct dwc3_trb	*trb;
+		dma_addr_t trb_dma;
+		u32 cmd;
+
+		memset(&params, 0, sizeof(params));
+		trb = &dep->trb_pool[0];
+		trb_dma = dwc3_trb_dma_offset(dep, trb);
+
+		params.param0 = upper_32_bits(trb_dma);
+		params.param1 = lower_32_bits(trb_dma);
+
+		cmd = DWC3_DEPCMD_STARTTRANSFER;
+
+		ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
+		if (ret < 0)
+			return ret;
+
+		if (dep->stream_capable) {
+			/*
+			 * For streams, at start, there maybe a race where the
+			 * host primes the endpoint before the function driver
+			 * queues a request to initiate a stream. In that case,
+			 * the controller will not see the prime to generate the
+			 * ERDY and start stream. To workaround this, issue a
+			 * no-op TRB as normal, but end it immediately. As a
+			 * result, when the function driver queues the request,
+			 * the next START_TRANSFER command will cause the
+			 * controller to generate an ERDY to initiate the
+			 * stream.
+			 */
+			dwc3_stop_active_transfer(dep, true, true);
+
+			/*
+			 * All stream eps will reinitiate stream on NoStream
+			 * rejection until we can determine that the host can
+			 * prime after the first transfer.
+			 *
+			 * However, if the controller is capable of
+			 * TXF_FLUSH_BYPASS, then IN direction endpoints will
+			 * automatically restart the stream without the driver
+			 * initiation.
+			 */
+			if (!dep->direction ||
+			    !(dwc->hwparams.hwparams9 &
+			      DWC3_GHWPARAMS9_DEV_TXF_FLUSH_BYPASS))
+				dep->flags |= DWC3_EP_FORCE_RESTART_STREAM;
+		}
+	}
+
+out:
+	trace_dwc3_gadget_ep_enable(dep);
+
+	return 0;
+}
+
+void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep, int status)
+{
+	struct dwc3_request		*req;
+
+	dwc3_stop_active_transfer(dep, true, false);
+
+	/* If endxfer is delayed, avoid unmapping requests */
+	if (dep->flags & DWC3_EP_DELAY_STOP)
+		return;
+
+	/* - giveback all requests to gadget driver */
+	while (!list_empty(&dep->started_list)) {
+		req = next_request(&dep->started_list);
+
+		dwc3_gadget_giveback(dep, req, status);
+	}
+
+	while (!list_empty(&dep->pending_list)) {
+		req = next_request(&dep->pending_list);
+
+		dwc3_gadget_giveback(dep, req, status);
+	}
+
+	while (!list_empty(&dep->cancelled_list)) {
+		req = next_request(&dep->cancelled_list);
+
+		dwc3_gadget_giveback(dep, req, status);
+	}
+}
+
+/**
+ * __dwc3_gadget_ep_disable - disables a hw endpoint
+ * @dep: the endpoint to disable
+ *
+ * This function undoes what __dwc3_gadget_ep_enable did and also removes
+ * requests which are currently being processed by the hardware and those which
+ * are not yet scheduled.
+ *
+ * Caller should take care of locking.
+ */
+static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
+{
+	struct dwc3		*dwc = dep->dwc;
+	u32			reg;
+	u32			mask;
+
+	trace_dwc3_gadget_ep_disable(dep);
+
+	/* make sure HW endpoint isn't stalled */
+	if (dep->flags & DWC3_EP_STALL)
+		__dwc3_gadget_ep_set_halt(dep, 0, false);
+
+	reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
+	reg &= ~DWC3_DALEPENA_EP(dep->number);
+	dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
+
+	dwc3_remove_requests(dwc, dep, -ESHUTDOWN);
+
+	dep->stream_capable = false;
+	dep->type = 0;
+	mask = DWC3_EP_TXFIFO_RESIZED;
+	/*
+	 * dwc3_remove_requests() can exit early if DWC3 EP delayed stop is
+	 * set.  Do not clear DEP flags, so that the end transfer command will
+	 * be reattempted during the next SETUP stage.
+	 */
+	if (dep->flags & DWC3_EP_DELAY_STOP)
+		mask |= (DWC3_EP_DELAY_STOP | DWC3_EP_TRANSFER_STARTED);
+	dep->flags &= mask;
+
+	/* Clear out the ep descriptors for non-ep0 */
+	if (dep->number > 1) {
+		dep->endpoint.comp_desc = NULL;
+		dep->endpoint.desc = NULL;
+	}
+
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int dwc3_gadget_ep0_enable(struct usb_ep *ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	return -EINVAL;
+}
+
+static int dwc3_gadget_ep0_disable(struct usb_ep *ep)
+{
+	return -EINVAL;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int dwc3_gadget_ep_enable(struct usb_ep *ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct dwc3_ep			*dep;
+	struct dwc3			*dwc;
+	unsigned long			flags;
+	int				ret;
+
+	if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
+		pr_debug("dwc3: invalid parameters\n");
+		return -EINVAL;
+	}
+
+	if (!desc->wMaxPacketSize) {
+		pr_debug("dwc3: missing wMaxPacketSize\n");
+		return -EINVAL;
+	}
+
+	dep = to_dwc3_ep(ep);
+	dwc = dep->dwc;
+
+	if (dev_WARN_ONCE(dwc->dev, dep->flags & DWC3_EP_ENABLED,
+					"%s is already enabled\n",
+					dep->name))
+		return 0;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static int dwc3_gadget_ep_disable(struct usb_ep *ep)
+{
+	struct dwc3_ep			*dep;
+	struct dwc3			*dwc;
+	unsigned long			flags;
+	int				ret;
+
+	if (!ep) {
+		pr_debug("dwc3: invalid parameters\n");
+		return -EINVAL;
+	}
+
+	dep = to_dwc3_ep(ep);
+	dwc = dep->dwc;
+
+	if (dev_WARN_ONCE(dwc->dev, !(dep->flags & DWC3_EP_ENABLED),
+					"%s is already disabled\n",
+					dep->name))
+		return 0;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	ret = __dwc3_gadget_ep_disable(dep);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep,
+		gfp_t gfp_flags)
+{
+	struct dwc3_request		*req;
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	req->direction	= dep->direction;
+	req->epnum	= dep->number;
+	req->dep	= dep;
+	req->status	= DWC3_REQUEST_STATUS_UNKNOWN;
+
+	trace_dwc3_alloc_request(req);
+
+	return &req->request;
+}
+
+static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
+		struct usb_request *request)
+{
+	struct dwc3_request		*req = to_dwc3_request(request);
+
+	trace_dwc3_free_request(req);
+	kfree(req);
+}
+
+/**
+ * dwc3_ep_prev_trb - returns the previous TRB in the ring
+ * @dep: The endpoint with the TRB ring
+ * @index: The index of the current TRB in the ring
+ *
+ * Returns the TRB prior to the one pointed to by the index. If the
+ * index is 0, we will wrap backwards, skip the link TRB, and return
+ * the one just before that.
+ */
+static struct dwc3_trb *dwc3_ep_prev_trb(struct dwc3_ep *dep, u8 index)
+{
+	u8 tmp = index;
+
+	if (!tmp)
+		tmp = DWC3_TRB_NUM - 1;
+
+	return &dep->trb_pool[tmp - 1];
+}
+
+static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
+{
+	u8			trbs_left;
+
+	/*
+	 * If the enqueue & dequeue are equal then the TRB ring is either full
+	 * or empty. It's considered full when there are DWC3_TRB_NUM-1 of TRBs
+	 * pending to be processed by the driver.
+	 */
+	if (dep->trb_enqueue == dep->trb_dequeue) {
+		/*
+		 * If there is any request remained in the started_list at
+		 * this point, that means there is no TRB available.
+		 */
+		if (!list_empty(&dep->started_list))
+			return 0;
+
+		return DWC3_TRB_NUM - 1;
+	}
+
+	trbs_left = dep->trb_dequeue - dep->trb_enqueue;
+	trbs_left &= (DWC3_TRB_NUM - 1);
+
+	if (dep->trb_dequeue < dep->trb_enqueue)
+		trbs_left--;
+
+	return trbs_left;
+}
+
+/**
+ * dwc3_prepare_one_trb - setup one TRB from one request
+ * @dep: endpoint for which this request is prepared
+ * @req: dwc3_request pointer
+ * @trb_length: buffer size of the TRB
+ * @chain: should this TRB be chained to the next?
+ * @node: only for isochronous endpoints. First TRB needs different type.
+ * @use_bounce_buffer: set to use bounce buffer
+ * @must_interrupt: set to interrupt on TRB completion
+ */
+static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
+		struct dwc3_request *req, unsigned int trb_length,
+		unsigned int chain, unsigned int node, bool use_bounce_buffer,
+		bool must_interrupt)
+{
+	struct dwc3_trb		*trb;
+	dma_addr_t		dma;
+	unsigned int		stream_id = req->request.stream_id;
+	unsigned int		short_not_ok = req->request.short_not_ok;
+	unsigned int		no_interrupt = req->request.no_interrupt;
+	unsigned int		is_last = req->request.is_last;
+	struct dwc3		*dwc = dep->dwc;
+	struct usb_gadget	*gadget = dwc->gadget;
+	enum usb_device_speed	speed = gadget->speed;
+
+	if (use_bounce_buffer)
+		dma = dep->dwc->bounce_addr;
+	else if (req->request.num_sgs > 0)
+		dma = sg_dma_address(req->start_sg);
+	else
+		dma = req->request.dma;
+
+	trb = &dep->trb_pool[dep->trb_enqueue];
+
+	if (!req->trb) {
+		dwc3_gadget_move_started_request(req);
+		req->trb = trb;
+		req->trb_dma = dwc3_trb_dma_offset(dep, trb);
+	}
+
+	req->num_trbs++;
+
+	trb->size = DWC3_TRB_SIZE_LENGTH(trb_length);
+	trb->bpl = lower_32_bits(dma);
+	trb->bph = upper_32_bits(dma);
+
+	switch (usb_endpoint_type(dep->endpoint.desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		trb->ctrl = DWC3_TRBCTL_CONTROL_SETUP;
+		break;
+
+	case USB_ENDPOINT_XFER_ISOC:
+		if (!node) {
+			trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
+
+			/*
+			 * USB Specification 2.0 Section 5.9.2 states that: "If
+			 * there is only a single transaction in the microframe,
+			 * only a DATA0 data packet PID is used.  If there are
+			 * two transactions per microframe, DATA1 is used for
+			 * the first transaction data packet and DATA0 is used
+			 * for the second transaction data packet.  If there are
+			 * three transactions per microframe, DATA2 is used for
+			 * the first transaction data packet, DATA1 is used for
+			 * the second, and DATA0 is used for the third."
+			 *
+			 * IOW, we should satisfy the following cases:
+			 *
+			 * 1) length <= maxpacket
+			 *	- DATA0
+			 *
+			 * 2) maxpacket < length <= (2 * maxpacket)
+			 *	- DATA1, DATA0
+			 *
+			 * 3) (2 * maxpacket) < length <= (3 * maxpacket)
+			 *	- DATA2, DATA1, DATA0
+			 */
+			if (speed == USB_SPEED_HIGH) {
+				struct usb_ep *ep = &dep->endpoint;
+				unsigned int mult = 2;
+				unsigned int maxp = usb_endpoint_maxp(ep->desc);
+
+				if (req->request.length <= (2 * maxp))
+					mult--;
+
+				if (req->request.length <= maxp)
+					mult--;
+
+				trb->size |= DWC3_TRB_SIZE_PCM1(mult);
+			}
+		} else {
+			trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS;
+		}
+
+		if (!no_interrupt && !chain)
+			trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
+		break;
+
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_INT:
+		trb->ctrl = DWC3_TRBCTL_NORMAL;
+		break;
+	default:
+		/*
+		 * This is only possible with faulty memory because we
+		 * checked it already :)
+		 */
+		dev_WARN(dwc->dev, "Unknown endpoint type %d\n",
+				usb_endpoint_type(dep->endpoint.desc));
+	}
+
+	/*
+	 * Enable Continue on Short Packet
+	 * when endpoint is not a stream capable
+	 */
+	if (usb_endpoint_dir_out(dep->endpoint.desc)) {
+		if (!dep->stream_capable)
+			trb->ctrl |= DWC3_TRB_CTRL_CSP;
+
+		if (short_not_ok)
+			trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
+	}
+
+	/* All TRBs setup for MST must set CSP=1 when LST=0 */
+	if (dep->stream_capable && DWC3_MST_CAPABLE(&dwc->hwparams))
+		trb->ctrl |= DWC3_TRB_CTRL_CSP;
+
+	if ((!no_interrupt && !chain) || must_interrupt)
+		trb->ctrl |= DWC3_TRB_CTRL_IOC;
+
+	if (chain)
+		trb->ctrl |= DWC3_TRB_CTRL_CHN;
+	else if (dep->stream_capable && is_last &&
+		 !DWC3_MST_CAPABLE(&dwc->hwparams))
+		trb->ctrl |= DWC3_TRB_CTRL_LST;
+
+	if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable)
+		trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(stream_id);
+
+	/*
+	 * As per data book 4.2.3.2TRB Control Bit Rules section
+	 *
+	 * The controller autonomously checks the HWO field of a TRB to determine if the
+	 * entire TRB is valid. Therefore, software must ensure that the rest of the TRB
+	 * is valid before setting the HWO field to '1'. In most systems, this means that
+	 * software must update the fourth DWORD of a TRB last.
+	 *
+	 * However there is a possibility of CPU re-ordering here which can cause
+	 * controller to observe the HWO bit set prematurely.
+	 * Add a write memory barrier to prevent CPU re-ordering.
+	 */
+	wmb();
+	trb->ctrl |= DWC3_TRB_CTRL_HWO;
+
+	dwc3_ep_inc_enq(dep);
+
+	trace_dwc3_prepare_trb(dep, trb);
+}
+
+static bool dwc3_needs_extra_trb(struct dwc3_ep *dep, struct dwc3_request *req)
+{
+	unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
+	unsigned int rem = req->request.length % maxp;
+
+	if ((req->request.length && req->request.zero && !rem &&
+			!usb_endpoint_xfer_isoc(dep->endpoint.desc)) ||
+			(!req->direction && rem))
+		return true;
+
+	return false;
+}
+
+/**
+ * dwc3_prepare_last_sg - prepare TRBs for the last SG entry
+ * @dep: The endpoint that the request belongs to
+ * @req: The request to prepare
+ * @entry_length: The last SG entry size
+ * @node: Indicates whether this is not the first entry (for isoc only)
+ *
+ * Return the number of TRBs prepared.
+ */
+static int dwc3_prepare_last_sg(struct dwc3_ep *dep,
+		struct dwc3_request *req, unsigned int entry_length,
+		unsigned int node)
+{
+	unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
+	unsigned int rem = req->request.length % maxp;
+	unsigned int num_trbs = 1;
+
+	if (dwc3_needs_extra_trb(dep, req))
+		num_trbs++;
+
+	if (dwc3_calc_trbs_left(dep) < num_trbs)
+		return 0;
+
+	req->needs_extra_trb = num_trbs > 1;
+
+	/* Prepare a normal TRB */
+	if (req->direction || req->request.length)
+		dwc3_prepare_one_trb(dep, req, entry_length,
+				req->needs_extra_trb, node, false, false);
+
+	/* Prepare extra TRBs for ZLP and MPS OUT transfer alignment */
+	if ((!req->direction && !req->request.length) || req->needs_extra_trb)
+		dwc3_prepare_one_trb(dep, req,
+				req->direction ? 0 : maxp - rem,
+				false, 1, true, false);
+
+	return num_trbs;
+}
+
+static int dwc3_prepare_trbs_sg(struct dwc3_ep *dep,
+		struct dwc3_request *req)
+{
+	struct scatterlist *sg = req->start_sg;
+	struct scatterlist *s;
+	int		i;
+	unsigned int length = req->request.length;
+	unsigned int remaining = req->request.num_mapped_sgs
+		- req->num_queued_sgs;
+	unsigned int num_trbs = req->num_trbs;
+	bool needs_extra_trb = dwc3_needs_extra_trb(dep, req);
+
+	/*
+	 * If we resume preparing the request, then get the remaining length of
+	 * the request and resume where we left off.
+	 */
+	for_each_sg(req->request.sg, s, req->num_queued_sgs, i)
+		length -= sg_dma_len(s);
+
+	for_each_sg(sg, s, remaining, i) {
+		unsigned int num_trbs_left = dwc3_calc_trbs_left(dep);
+		unsigned int trb_length;
+		bool must_interrupt = false;
+		bool last_sg = false;
+
+		trb_length = min_t(unsigned int, length, sg_dma_len(s));
+
+		length -= trb_length;
+
+		/*
+		 * IOMMU driver is coalescing the list of sgs which shares a
+		 * page boundary into one and giving it to USB driver. With
+		 * this the number of sgs mapped is not equal to the number of
+		 * sgs passed. So mark the chain bit to false if it isthe last
+		 * mapped sg.
+		 */
+		if ((i == remaining - 1) || !length)
+			last_sg = true;
+
+		if (!num_trbs_left)
+			break;
+
+		if (last_sg) {
+			if (!dwc3_prepare_last_sg(dep, req, trb_length, i))
+				break;
+		} else {
+			/*
+			 * Look ahead to check if we have enough TRBs for the
+			 * next SG entry. If not, set interrupt on this TRB to
+			 * resume preparing the next SG entry when more TRBs are
+			 * free.
+			 */
+			if (num_trbs_left == 1 || (needs_extra_trb &&
+					num_trbs_left <= 2 &&
+					sg_dma_len(sg_next(s)) >= length))
+				must_interrupt = true;
+
+			dwc3_prepare_one_trb(dep, req, trb_length, 1, i, false,
+					must_interrupt);
+		}
+
+		/*
+		 * There can be a situation where all sgs in sglist are not
+		 * queued because of insufficient trb number. To handle this
+		 * case, update start_sg to next sg to be queued, so that
+		 * we have free trbs we can continue queuing from where we
+		 * previously stopped
+		 */
+		if (!last_sg)
+			req->start_sg = sg_next(s);
+
+		req->num_queued_sgs++;
+		req->num_pending_sgs--;
+
+		/*
+		 * The number of pending SG entries may not correspond to the
+		 * number of mapped SG entries. If all the data are queued, then
+		 * don't include unused SG entries.
+		 */
+		if (length == 0) {
+			req->num_pending_sgs = 0;
+			break;
+		}
+
+		if (must_interrupt)
+			break;
+	}
+
+	return req->num_trbs - num_trbs;
+}
+
+static int dwc3_prepare_trbs_linear(struct dwc3_ep *dep,
+		struct dwc3_request *req)
+{
+	return dwc3_prepare_last_sg(dep, req, req->request.length, 0);
+}
+
+/*
+ * dwc3_prepare_trbs - setup TRBs from requests
+ * @dep: endpoint for which requests are being prepared
+ *
+ * The function goes through the requests list and sets up TRBs for the
+ * transfers. The function returns once there are no more TRBs available or
+ * it runs out of requests.
+ *
+ * Returns the number of TRBs prepared or negative errno.
+ */
+static int dwc3_prepare_trbs(struct dwc3_ep *dep)
+{
+	struct dwc3_request	*req, *n;
+	int			ret = 0;
+
+	BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
+
+	/*
+	 * We can get in a situation where there's a request in the started list
+	 * but there weren't enough TRBs to fully kick it in the first time
+	 * around, so it has been waiting for more TRBs to be freed up.
+	 *
+	 * In that case, we should check if we have a request with pending_sgs
+	 * in the started list and prepare TRBs for that request first,
+	 * otherwise we will prepare TRBs completely out of order and that will
+	 * break things.
+	 */
+	list_for_each_entry(req, &dep->started_list, list) {
+		if (req->num_pending_sgs > 0) {
+			ret = dwc3_prepare_trbs_sg(dep, req);
+			if (!ret || req->num_pending_sgs)
+				return ret;
+		}
+
+		if (!dwc3_calc_trbs_left(dep))
+			return ret;
+
+		/*
+		 * Don't prepare beyond a transfer. In DWC_usb32, its transfer
+		 * burst capability may try to read and use TRBs beyond the
+		 * active transfer instead of stopping.
+		 */
+		if (dep->stream_capable && req->request.is_last &&
+		    !DWC3_MST_CAPABLE(&dep->dwc->hwparams))
+			return ret;
+	}
+
+	list_for_each_entry_safe(req, n, &dep->pending_list, list) {
+		struct dwc3	*dwc = dep->dwc;
+
+		ret = usb_gadget_map_request_by_dev(dwc->sysdev, &req->request,
+						    dep->direction);
+		if (ret)
+			return ret;
+
+		req->sg			= req->request.sg;
+		req->start_sg		= req->sg;
+		req->num_queued_sgs	= 0;
+		req->num_pending_sgs	= req->request.num_mapped_sgs;
+
+		if (req->num_pending_sgs > 0) {
+			ret = dwc3_prepare_trbs_sg(dep, req);
+			if (req->num_pending_sgs)
+				return ret;
+		} else {
+			ret = dwc3_prepare_trbs_linear(dep, req);
+		}
+
+		if (!ret || !dwc3_calc_trbs_left(dep))
+			return ret;
+
+		/*
+		 * Don't prepare beyond a transfer. In DWC_usb32, its transfer
+		 * burst capability may try to read and use TRBs beyond the
+		 * active transfer instead of stopping.
+		 */
+		if (dep->stream_capable && req->request.is_last &&
+		    !DWC3_MST_CAPABLE(&dwc->hwparams))
+			return ret;
+	}
+
+	return ret;
+}
+
+static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep);
+
+static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+	struct dwc3_request		*req;
+	int				starting;
+	int				ret;
+	u32				cmd;
+
+	/*
+	 * Note that it's normal to have no new TRBs prepared (i.e. ret == 0).
+	 * This happens when we need to stop and restart a transfer such as in
+	 * the case of reinitiating a stream or retrying an isoc transfer.
+	 */
+	ret = dwc3_prepare_trbs(dep);
+	if (ret < 0)
+		return ret;
+
+	starting = !(dep->flags & DWC3_EP_TRANSFER_STARTED);
+
+	/*
+	 * If there's no new TRB prepared and we don't need to restart a
+	 * transfer, there's no need to update the transfer.
+	 */
+	if (!ret && !starting)
+		return ret;
+
+	req = next_request(&dep->started_list);
+	if (!req) {
+		dep->flags |= DWC3_EP_PENDING_REQUEST;
+		return 0;
+	}
+
+	memset(&params, 0, sizeof(params));
+
+	if (starting) {
+		params.param0 = upper_32_bits(req->trb_dma);
+		params.param1 = lower_32_bits(req->trb_dma);
+		cmd = DWC3_DEPCMD_STARTTRANSFER;
+
+		if (dep->stream_capable)
+			cmd |= DWC3_DEPCMD_PARAM(req->request.stream_id);
+
+		if (usb_endpoint_xfer_isoc(dep->endpoint.desc))
+			cmd |= DWC3_DEPCMD_PARAM(dep->frame_number);
+	} else {
+		cmd = DWC3_DEPCMD_UPDATETRANSFER |
+			DWC3_DEPCMD_PARAM(dep->resource_index);
+	}
+
+	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
+	if (ret < 0) {
+		struct dwc3_request *tmp;
+
+		if (ret == -EAGAIN)
+			return ret;
+
+		dwc3_stop_active_transfer(dep, true, true);
+
+		list_for_each_entry_safe(req, tmp, &dep->started_list, list)
+			dwc3_gadget_move_cancelled_request(req, DWC3_REQUEST_STATUS_DEQUEUED);
+
+		/* If ep isn't started, then there's no end transfer pending */
+		if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
+			dwc3_gadget_ep_cleanup_cancelled_requests(dep);
+
+		return ret;
+	}
+
+	if (dep->stream_capable && req->request.is_last &&
+	    !DWC3_MST_CAPABLE(&dep->dwc->hwparams))
+		dep->flags |= DWC3_EP_WAIT_TRANSFER_COMPLETE;
+
+	return 0;
+}
+
+static int __dwc3_gadget_get_frame(struct dwc3 *dwc)
+{
+	u32			reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+	return DWC3_DSTS_SOFFN(reg);
+}
+
+/**
+ * __dwc3_stop_active_transfer - stop the current active transfer
+ * @dep: isoc endpoint
+ * @force: set forcerm bit in the command
+ * @interrupt: command complete interrupt after End Transfer command
+ *
+ * When setting force, the ForceRM bit will be set. In that case
+ * the controller won't update the TRB progress on command
+ * completion. It also won't clear the HWO bit in the TRB.
+ * The command will also not complete immediately in that case.
+ */
+static int __dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool interrupt)
+{
+	struct dwc3 *dwc = dep->dwc;
+	struct dwc3_gadget_ep_cmd_params params;
+	u32 cmd;
+	int ret;
+
+	cmd = DWC3_DEPCMD_ENDTRANSFER;
+	cmd |= force ? DWC3_DEPCMD_HIPRI_FORCERM : 0;
+	cmd |= interrupt ? DWC3_DEPCMD_CMDIOC : 0;
+	cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
+	memset(&params, 0, sizeof(params));
+	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
+	/*
+	 * If the End Transfer command was timed out while the device is
+	 * not in SETUP phase, it's possible that an incoming Setup packet
+	 * may prevent the command's completion. Let's retry when the
+	 * ep0state returns to EP0_SETUP_PHASE.
+	 */
+	if (ret == -ETIMEDOUT && dep->dwc->ep0state != EP0_SETUP_PHASE) {
+		dep->flags |= DWC3_EP_DELAY_STOP;
+		return 0;
+	}
+	WARN_ON_ONCE(ret);
+	dep->resource_index = 0;
+
+	if (!interrupt) {
+		if (!DWC3_IP_IS(DWC3) || DWC3_VER_IS_PRIOR(DWC3, 310A))
+			mdelay(1);
+		dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
+	} else if (!ret) {
+		dep->flags |= DWC3_EP_END_TRANSFER_PENDING;
+	}
+
+	dep->flags &= ~DWC3_EP_DELAY_STOP;
+	return ret;
+}
+
+/**
+ * dwc3_gadget_start_isoc_quirk - workaround invalid frame number
+ * @dep: isoc endpoint
+ *
+ * This function tests for the correct combination of BIT[15:14] from the 16-bit
+ * microframe number reported by the XferNotReady event for the future frame
+ * number to start the isoc transfer.
+ *
+ * In DWC_usb31 version 1.70a-ea06 and prior, for highspeed and fullspeed
+ * isochronous IN, BIT[15:14] of the 16-bit microframe number reported by the
+ * XferNotReady event are invalid. The driver uses this number to schedule the
+ * isochronous transfer and passes it to the START TRANSFER command. Because
+ * this number is invalid, the command may fail. If BIT[15:14] matches the
+ * internal 16-bit microframe, the START TRANSFER command will pass and the
+ * transfer will start at the scheduled time, if it is off by 1, the command
+ * will still pass, but the transfer will start 2 seconds in the future. For all
+ * other conditions, the START TRANSFER command will fail with bus-expiry.
+ *
+ * In order to workaround this issue, we can test for the correct combination of
+ * BIT[15:14] by sending START TRANSFER commands with different values of
+ * BIT[15:14]: 'b00, 'b01, 'b10, and 'b11. Each combination is 2^14 uframe apart
+ * (or 2 seconds). 4 seconds into the future will result in a bus-expiry status.
+ * As the result, within the 4 possible combinations for BIT[15:14], there will
+ * be 2 successful and 2 failure START COMMAND status. One of the 2 successful
+ * command status will result in a 2-second delay start. The smaller BIT[15:14]
+ * value is the correct combination.
+ *
+ * Since there are only 4 outcomes and the results are ordered, we can simply
+ * test 2 START TRANSFER commands with BIT[15:14] combinations 'b00 and 'b01 to
+ * deduce the smaller successful combination.
+ *
+ * Let test0 = test status for combination 'b00 and test1 = test status for 'b01
+ * of BIT[15:14]. The correct combination is as follow:
+ *
+ * if test0 fails and test1 passes, BIT[15:14] is 'b01
+ * if test0 fails and test1 fails, BIT[15:14] is 'b10
+ * if test0 passes and test1 fails, BIT[15:14] is 'b11
+ * if test0 passes and test1 passes, BIT[15:14] is 'b00
+ *
+ * Synopsys STAR 9001202023: Wrong microframe number for isochronous IN
+ * endpoints.
+ */
+static int dwc3_gadget_start_isoc_quirk(struct dwc3_ep *dep)
+{
+	int cmd_status = 0;
+	bool test0;
+	bool test1;
+
+	while (dep->combo_num < 2) {
+		struct dwc3_gadget_ep_cmd_params params;
+		u32 test_frame_number;
+		u32 cmd;
+
+		/*
+		 * Check if we can start isoc transfer on the next interval or
+		 * 4 uframes in the future with BIT[15:14] as dep->combo_num
+		 */
+		test_frame_number = dep->frame_number & DWC3_FRNUMBER_MASK;
+		test_frame_number |= dep->combo_num << 14;
+		test_frame_number += max_t(u32, 4, dep->interval);
+
+		params.param0 = upper_32_bits(dep->dwc->bounce_addr);
+		params.param1 = lower_32_bits(dep->dwc->bounce_addr);
+
+		cmd = DWC3_DEPCMD_STARTTRANSFER;
+		cmd |= DWC3_DEPCMD_PARAM(test_frame_number);
+		cmd_status = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
+
+		/* Redo if some other failure beside bus-expiry is received */
+		if (cmd_status && cmd_status != -EAGAIN) {
+			dep->start_cmd_status = 0;
+			dep->combo_num = 0;
+			return 0;
+		}
+
+		/* Store the first test status */
+		if (dep->combo_num == 0)
+			dep->start_cmd_status = cmd_status;
+
+		dep->combo_num++;
+
+		/*
+		 * End the transfer if the START_TRANSFER command is successful
+		 * to wait for the next XferNotReady to test the command again
+		 */
+		if (cmd_status == 0) {
+			dwc3_stop_active_transfer(dep, true, true);
+			return 0;
+		}
+	}
+
+	/* test0 and test1 are both completed at this point */
+	test0 = (dep->start_cmd_status == 0);
+	test1 = (cmd_status == 0);
+
+	if (!test0 && test1)
+		dep->combo_num = 1;
+	else if (!test0 && !test1)
+		dep->combo_num = 2;
+	else if (test0 && !test1)
+		dep->combo_num = 3;
+	else if (test0 && test1)
+		dep->combo_num = 0;
+
+	dep->frame_number &= DWC3_FRNUMBER_MASK;
+	dep->frame_number |= dep->combo_num << 14;
+	dep->frame_number += max_t(u32, 4, dep->interval);
+
+	/* Reinitialize test variables */
+	dep->start_cmd_status = 0;
+	dep->combo_num = 0;
+
+	return __dwc3_gadget_kick_transfer(dep);
+}
+
+static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep)
+{
+	const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
+	struct dwc3 *dwc = dep->dwc;
+	int ret;
+	int i;
+
+	if (list_empty(&dep->pending_list) &&
+	    list_empty(&dep->started_list)) {
+		dep->flags |= DWC3_EP_PENDING_REQUEST;
+		return -EAGAIN;
+	}
+
+	if (!dwc->dis_start_transfer_quirk &&
+	    (DWC3_VER_IS_PRIOR(DWC31, 170A) ||
+	     DWC3_VER_TYPE_IS_WITHIN(DWC31, 170A, EA01, EA06))) {
+		if (dwc->gadget->speed <= USB_SPEED_HIGH && dep->direction)
+			return dwc3_gadget_start_isoc_quirk(dep);
+	}
+
+	if (desc->bInterval <= 14 &&
+	    dwc->gadget->speed >= USB_SPEED_HIGH) {
+		u32 frame = __dwc3_gadget_get_frame(dwc);
+		bool rollover = frame <
+				(dep->frame_number & DWC3_FRNUMBER_MASK);
+
+		/*
+		 * frame_number is set from XferNotReady and may be already
+		 * out of date. DSTS only provides the lower 14 bit of the
+		 * current frame number. So add the upper two bits of
+		 * frame_number and handle a possible rollover.
+		 * This will provide the correct frame_number unless more than
+		 * rollover has happened since XferNotReady.
+		 */
+
+		dep->frame_number = (dep->frame_number & ~DWC3_FRNUMBER_MASK) |
+				     frame;
+		if (rollover)
+			dep->frame_number += BIT(14);
+	}
+
+	for (i = 0; i < DWC3_ISOC_MAX_RETRIES; i++) {
+		int future_interval = i + 1;
+
+		/* Give the controller at least 500us to schedule transfers */
+		if (desc->bInterval < 3)
+			future_interval += 3 - desc->bInterval;
+
+		dep->frame_number = DWC3_ALIGN_FRAME(dep, future_interval);
+
+		ret = __dwc3_gadget_kick_transfer(dep);
+		if (ret != -EAGAIN)
+			break;
+	}
+
+	/*
+	 * After a number of unsuccessful start attempts due to bus-expiry
+	 * status, issue END_TRANSFER command and retry on the next XferNotReady
+	 * event.
+	 */
+	if (ret == -EAGAIN)
+		ret = __dwc3_stop_active_transfer(dep, false, true);
+
+	return ret;
+}
+
+static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
+{
+	struct dwc3		*dwc = dep->dwc;
+
+	if (!dep->endpoint.desc || !dwc->pullups_connected || !dwc->connected) {
+		dev_dbg(dwc->dev, "%s: can't queue to disabled endpoint\n",
+				dep->name);
+		return -ESHUTDOWN;
+	}
+
+	if (WARN(req->dep != dep, "request %pK belongs to '%s'\n",
+				&req->request, req->dep->name))
+		return -EINVAL;
+
+	if (WARN(req->status < DWC3_REQUEST_STATUS_COMPLETED,
+				"%s: request %pK already in flight\n",
+				dep->name, &req->request))
+		return -EINVAL;
+
+	pm_runtime_get(dwc->dev);
+
+	req->request.actual	= 0;
+	req->request.status	= -EINPROGRESS;
+
+	trace_dwc3_ep_queue(req);
+
+	list_add_tail(&req->list, &dep->pending_list);
+	req->status = DWC3_REQUEST_STATUS_QUEUED;
+
+	if (dep->flags & DWC3_EP_WAIT_TRANSFER_COMPLETE)
+		return 0;
+
+	/*
+	 * Start the transfer only after the END_TRANSFER is completed
+	 * and endpoint STALL is cleared.
+	 */
+	if ((dep->flags & DWC3_EP_END_TRANSFER_PENDING) ||
+	    (dep->flags & DWC3_EP_WEDGE) ||
+	    (dep->flags & DWC3_EP_DELAY_STOP) ||
+	    (dep->flags & DWC3_EP_STALL)) {
+		dep->flags |= DWC3_EP_DELAY_START;
+		return 0;
+	}
+
+	/*
+	 * NOTICE: Isochronous endpoints should NEVER be prestarted. We must
+	 * wait for a XferNotReady event so we will know what's the current
+	 * (micro-)frame number.
+	 *
+	 * Without this trick, we are very, very likely gonna get Bus Expiry
+	 * errors which will force us issue EndTransfer command.
+	 */
+	if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
+		if (!(dep->flags & DWC3_EP_TRANSFER_STARTED)) {
+			if ((dep->flags & DWC3_EP_PENDING_REQUEST))
+				return __dwc3_gadget_start_isoc(dep);
+
+			return 0;
+		}
+	}
+
+	__dwc3_gadget_kick_transfer(dep);
+
+	return 0;
+}
+
+static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
+	gfp_t gfp_flags)
+{
+	struct dwc3_request		*req = to_dwc3_request(request);
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+
+	unsigned long			flags;
+
+	int				ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	ret = __dwc3_gadget_ep_queue(dep, req);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static void dwc3_gadget_ep_skip_trbs(struct dwc3_ep *dep, struct dwc3_request *req)
+{
+	int i;
+
+	/* If req->trb is not set, then the request has not started */
+	if (!req->trb)
+		return;
+
+	/*
+	 * If request was already started, this means we had to
+	 * stop the transfer. With that we also need to ignore
+	 * all TRBs used by the request, however TRBs can only
+	 * be modified after completion of END_TRANSFER
+	 * command. So what we do here is that we wait for
+	 * END_TRANSFER completion and only after that, we jump
+	 * over TRBs by clearing HWO and incrementing dequeue
+	 * pointer.
+	 */
+	for (i = 0; i < req->num_trbs; i++) {
+		struct dwc3_trb *trb;
+
+		trb = &dep->trb_pool[dep->trb_dequeue];
+		trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+		dwc3_ep_inc_deq(dep);
+	}
+
+	req->num_trbs = 0;
+}
+
+static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep)
+{
+	struct dwc3_request		*req;
+	struct dwc3			*dwc = dep->dwc;
+
+	while (!list_empty(&dep->cancelled_list)) {
+		req = next_request(&dep->cancelled_list);
+		dwc3_gadget_ep_skip_trbs(dep, req);
+		switch (req->status) {
+		case DWC3_REQUEST_STATUS_DISCONNECTED:
+			dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
+			break;
+		case DWC3_REQUEST_STATUS_DEQUEUED:
+			dwc3_gadget_giveback(dep, req, -ECONNRESET);
+			break;
+		case DWC3_REQUEST_STATUS_STALLED:
+			dwc3_gadget_giveback(dep, req, -EPIPE);
+			break;
+		default:
+			dev_err(dwc->dev, "request cancelled with wrong reason:%d\n", req->status);
+			dwc3_gadget_giveback(dep, req, -ECONNRESET);
+			break;
+		}
+		/*
+		 * The endpoint is disabled, let the dwc3_remove_requests()
+		 * handle the cleanup.
+		 */
+		if (!dep->endpoint.desc)
+			break;
+	}
+}
+
+static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
+		struct usb_request *request)
+{
+	struct dwc3_request		*req = to_dwc3_request(request);
+	struct dwc3_request		*r = NULL;
+
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+
+	unsigned long			flags;
+	int				ret = 0;
+
+	trace_dwc3_ep_dequeue(req);
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	list_for_each_entry(r, &dep->cancelled_list, list) {
+		if (r == req)
+			goto out;
+	}
+
+	list_for_each_entry(r, &dep->pending_list, list) {
+		if (r == req) {
+			/*
+			 * Explicitly check for EP0/1 as dequeue for those
+			 * EPs need to be handled differently.  Control EP
+			 * only deals with one USB req, and giveback will
+			 * occur during dwc3_ep0_stall_and_restart().  EP0
+			 * requests are never added to started_list.
+			 */
+			if (dep->number > 1)
+				dwc3_gadget_giveback(dep, req, -ECONNRESET);
+			else
+				dwc3_ep0_reset_state(dwc);
+			goto out;
+		}
+	}
+
+	list_for_each_entry(r, &dep->started_list, list) {
+		if (r == req) {
+			struct dwc3_request *t;
+
+			/* wait until it is processed */
+			dwc3_stop_active_transfer(dep, true, true);
+
+			/*
+			 * Remove any started request if the transfer is
+			 * cancelled.
+			 */
+			list_for_each_entry_safe(r, t, &dep->started_list, list)
+				dwc3_gadget_move_cancelled_request(r,
+						DWC3_REQUEST_STATUS_DEQUEUED);
+
+			dep->flags &= ~DWC3_EP_WAIT_TRANSFER_COMPLETE;
+
+			goto out;
+		}
+	}
+
+	dev_err(dwc->dev, "request %pK was not queued to %s\n",
+		request, ep->name);
+	ret = -EINVAL;
+out:
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
+{
+	struct dwc3_gadget_ep_cmd_params	params;
+	struct dwc3				*dwc = dep->dwc;
+	struct dwc3_request			*req;
+	struct dwc3_request			*tmp;
+	int					ret;
+
+	if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
+		dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name);
+		return -EINVAL;
+	}
+
+	memset(&params, 0x00, sizeof(params));
+
+	if (value) {
+		struct dwc3_trb *trb;
+
+		unsigned int transfer_in_flight;
+		unsigned int started;
+
+		if (dep->number > 1)
+			trb = dwc3_ep_prev_trb(dep, dep->trb_enqueue);
+		else
+			trb = &dwc->ep0_trb[dep->trb_enqueue];
+
+		transfer_in_flight = trb->ctrl & DWC3_TRB_CTRL_HWO;
+		started = !list_empty(&dep->started_list);
+
+		if (!protocol && ((dep->direction && transfer_in_flight) ||
+				(!dep->direction && started))) {
+			return -EAGAIN;
+		}
+
+		ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETSTALL,
+				&params);
+		if (ret)
+			dev_err(dwc->dev, "failed to set STALL on %s\n",
+					dep->name);
+		else
+			dep->flags |= DWC3_EP_STALL;
+	} else {
+		/*
+		 * Don't issue CLEAR_STALL command to control endpoints. The
+		 * controller automatically clears the STALL when it receives
+		 * the SETUP token.
+		 */
+		if (dep->number <= 1) {
+			dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
+			return 0;
+		}
+
+		dwc3_stop_active_transfer(dep, true, true);
+
+		list_for_each_entry_safe(req, tmp, &dep->started_list, list)
+			dwc3_gadget_move_cancelled_request(req, DWC3_REQUEST_STATUS_STALLED);
+
+		if (dep->flags & DWC3_EP_END_TRANSFER_PENDING ||
+		    (dep->flags & DWC3_EP_DELAY_STOP)) {
+			dep->flags |= DWC3_EP_PENDING_CLEAR_STALL;
+			if (protocol)
+				dwc->clear_stall_protocol = dep->number;
+
+			return 0;
+		}
+
+		dwc3_gadget_ep_cleanup_cancelled_requests(dep);
+
+		ret = dwc3_send_clear_stall_ep_cmd(dep);
+		if (ret) {
+			dev_err(dwc->dev, "failed to clear STALL on %s\n",
+					dep->name);
+			return ret;
+		}
+
+		dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
+
+		if ((dep->flags & DWC3_EP_DELAY_START) &&
+		    !usb_endpoint_xfer_isoc(dep->endpoint.desc))
+			__dwc3_gadget_kick_transfer(dep);
+
+		dep->flags &= ~DWC3_EP_DELAY_START;
+	}
+
+	return ret;
+}
+
+static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value)
+{
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+
+	unsigned long			flags;
+
+	int				ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	ret = __dwc3_gadget_ep_set_halt(dep, value, false);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep)
+{
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+	unsigned long			flags;
+	int				ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dep->flags |= DWC3_EP_WEDGE;
+
+	if (dep->number == 0 || dep->number == 1)
+		ret = __dwc3_gadget_ep0_set_halt(ep, 1);
+	else
+		ret = __dwc3_gadget_ep_set_halt(dep, 1, false);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static struct usb_endpoint_descriptor dwc3_gadget_ep0_desc = {
+	.bLength	= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+	.bmAttributes	= USB_ENDPOINT_XFER_CONTROL,
+};
+
+static const struct usb_ep_ops dwc3_gadget_ep0_ops = {
+	.enable		= dwc3_gadget_ep0_enable,
+	.disable	= dwc3_gadget_ep0_disable,
+	.alloc_request	= dwc3_gadget_ep_alloc_request,
+	.free_request	= dwc3_gadget_ep_free_request,
+	.queue		= dwc3_gadget_ep0_queue,
+	.dequeue	= dwc3_gadget_ep_dequeue,
+	.set_halt	= dwc3_gadget_ep0_set_halt,
+	.set_wedge	= dwc3_gadget_ep_set_wedge,
+};
+
+static const struct usb_ep_ops dwc3_gadget_ep_ops = {
+	.enable		= dwc3_gadget_ep_enable,
+	.disable	= dwc3_gadget_ep_disable,
+	.alloc_request	= dwc3_gadget_ep_alloc_request,
+	.free_request	= dwc3_gadget_ep_free_request,
+	.queue		= dwc3_gadget_ep_queue,
+	.dequeue	= dwc3_gadget_ep_dequeue,
+	.set_halt	= dwc3_gadget_ep_set_halt,
+	.set_wedge	= dwc3_gadget_ep_set_wedge,
+};
+
+/* -------------------------------------------------------------------------- */
+
+static int dwc3_gadget_get_frame(struct usb_gadget *g)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+
+	return __dwc3_gadget_get_frame(dwc);
+}
+
+static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
+{
+	int			retries;
+
+	int			ret;
+	u32			reg;
+
+	u8			link_state;
+
+	/*
+	 * According to the Databook Remote wakeup request should
+	 * be issued only when the device is in early suspend state.
+	 *
+	 * We can check that via USB Link State bits in DSTS register.
+	 */
+	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+
+	link_state = DWC3_DSTS_USBLNKST(reg);
+
+	switch (link_state) {
+	case DWC3_LINK_STATE_RESET:
+	case DWC3_LINK_STATE_RX_DET:	/* in HS, means Early Suspend */
+	case DWC3_LINK_STATE_U3:	/* in HS, means SUSPEND */
+	case DWC3_LINK_STATE_U2:	/* in HS, means Sleep (L1) */
+	case DWC3_LINK_STATE_U1:
+	case DWC3_LINK_STATE_RESUME:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RECOV);
+	if (ret < 0) {
+		dev_err(dwc->dev, "failed to put link in Recovery\n");
+		return ret;
+	}
+
+	/* Recent versions do this automatically */
+	if (DWC3_VER_IS_PRIOR(DWC3, 194A)) {
+		/* write zeroes to Link Change Request */
+		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+		reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
+		dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+	}
+
+	/* poll until Link State changes to ON */
+	retries = 20000;
+
+	while (retries--) {
+		reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+
+		/* in HS, means ON */
+		if (DWC3_DSTS_USBLNKST(reg) == DWC3_LINK_STATE_U0)
+			break;
+	}
+
+	if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) {
+		dev_err(dwc->dev, "failed to send remote wakeup\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int dwc3_gadget_wakeup(struct usb_gadget *g)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+	int			ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	ret = __dwc3_gadget_wakeup(dwc);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
+		int is_selfpowered)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	g->is_selfpowered = !!is_selfpowered;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
+}
+
+static void dwc3_stop_active_transfers(struct dwc3 *dwc)
+{
+	u32 epnum;
+
+	for (epnum = 2; epnum < dwc->num_eps; epnum++) {
+		struct dwc3_ep *dep;
+
+		dep = dwc->eps[epnum];
+		if (!dep)
+			continue;
+
+		dwc3_remove_requests(dwc, dep, -ESHUTDOWN);
+	}
+}
+
+static void __dwc3_gadget_set_ssp_rate(struct dwc3 *dwc)
+{
+	enum usb_ssp_rate	ssp_rate = dwc->gadget_ssp_rate;
+	u32			reg;
+
+	if (ssp_rate == USB_SSP_GEN_UNKNOWN)
+		ssp_rate = dwc->max_ssp_rate;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+	reg &= ~DWC3_DCFG_SPEED_MASK;
+	reg &= ~DWC3_DCFG_NUMLANES(~0);
+
+	if (ssp_rate == USB_SSP_GEN_1x2)
+		reg |= DWC3_DCFG_SUPERSPEED;
+	else if (dwc->max_ssp_rate != USB_SSP_GEN_1x2)
+		reg |= DWC3_DCFG_SUPERSPEED_PLUS;
+
+	if (ssp_rate != USB_SSP_GEN_2x1 &&
+	    dwc->max_ssp_rate != USB_SSP_GEN_2x1)
+		reg |= DWC3_DCFG_NUMLANES(1);
+
+	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+}
+
+static void __dwc3_gadget_set_speed(struct dwc3 *dwc)
+{
+	enum usb_device_speed	speed;
+	u32			reg;
+
+	speed = dwc->gadget_max_speed;
+	if (speed == USB_SPEED_UNKNOWN || speed > dwc->maximum_speed)
+		speed = dwc->maximum_speed;
+
+	if (speed == USB_SPEED_SUPER_PLUS &&
+	    DWC3_IP_IS(DWC32)) {
+		__dwc3_gadget_set_ssp_rate(dwc);
+		return;
+	}
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+	reg &= ~(DWC3_DCFG_SPEED_MASK);
+
+	/*
+	 * WORKAROUND: DWC3 revision < 2.20a have an issue
+	 * which would cause metastability state on Run/Stop
+	 * bit if we try to force the IP to USB2-only mode.
+	 *
+	 * Because of that, we cannot configure the IP to any
+	 * speed other than the SuperSpeed
+	 *
+	 * Refers to:
+	 *
+	 * STAR#9000525659: Clock Domain Crossing on DCTL in
+	 * USB 2.0 Mode
+	 */
+	if (DWC3_VER_IS_PRIOR(DWC3, 220A) &&
+	    !dwc->dis_metastability_quirk) {
+		reg |= DWC3_DCFG_SUPERSPEED;
+	} else {
+		switch (speed) {
+		case USB_SPEED_FULL:
+			reg |= DWC3_DCFG_FULLSPEED;
+			break;
+		case USB_SPEED_HIGH:
+			reg |= DWC3_DCFG_HIGHSPEED;
+			break;
+		case USB_SPEED_SUPER:
+			reg |= DWC3_DCFG_SUPERSPEED;
+			break;
+		case USB_SPEED_SUPER_PLUS:
+			if (DWC3_IP_IS(DWC3))
+				reg |= DWC3_DCFG_SUPERSPEED;
+			else
+				reg |= DWC3_DCFG_SUPERSPEED_PLUS;
+			break;
+		default:
+			dev_err(dwc->dev, "invalid speed (%d)\n", speed);
+
+			if (DWC3_IP_IS(DWC3))
+				reg |= DWC3_DCFG_SUPERSPEED;
+			else
+				reg |= DWC3_DCFG_SUPERSPEED_PLUS;
+		}
+	}
+
+	if (DWC3_IP_IS(DWC32) &&
+	    speed > USB_SPEED_UNKNOWN &&
+	    speed < USB_SPEED_SUPER_PLUS)
+		reg &= ~DWC3_DCFG_NUMLANES(~0);
+
+	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+}
+
+static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
+{
+	u32			reg;
+	u32			timeout = 2000;
+
+	if (pm_runtime_suspended(dwc->dev))
+		return 0;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	if (is_on) {
+		if (DWC3_VER_IS_WITHIN(DWC3, ANY, 187A)) {
+			reg &= ~DWC3_DCTL_TRGTULST_MASK;
+			reg |= DWC3_DCTL_TRGTULST_RX_DET;
+		}
+
+		if (!DWC3_VER_IS_PRIOR(DWC3, 194A))
+			reg &= ~DWC3_DCTL_KEEP_CONNECT;
+		reg |= DWC3_DCTL_RUN_STOP;
+
+		__dwc3_gadget_set_speed(dwc);
+		dwc->pullups_connected = true;
+	} else {
+		reg &= ~DWC3_DCTL_RUN_STOP;
+
+		dwc->pullups_connected = false;
+	}
+
+	dwc3_gadget_dctl_write_safe(dwc, reg);
+
+	do {
+		usleep_range(1000, 2000);
+		reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+		reg &= DWC3_DSTS_DEVCTRLHLT;
+	} while (--timeout && !(!is_on ^ !reg));
+
+	if (!timeout)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static void dwc3_gadget_disable_irq(struct dwc3 *dwc);
+static void __dwc3_gadget_stop(struct dwc3 *dwc);
+static int __dwc3_gadget_start(struct dwc3 *dwc);
+
+static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc->connected = false;
+
+	/*
+	 * Attempt to end pending SETUP status phase, and not wait for the
+	 * function to do so.
+	 */
+	if (dwc->delayed_status)
+		dwc3_ep0_send_delayed_status(dwc);
+
+	/*
+	 * In the Synopsys DesignWare Cores USB3 Databook Rev. 3.30a
+	 * Section 4.1.8 Table 4-7, it states that for a device-initiated
+	 * disconnect, the SW needs to ensure that it sends "a DEPENDXFER
+	 * command for any active transfers" before clearing the RunStop
+	 * bit.
+	 */
+	dwc3_stop_active_transfers(dwc);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	/*
+	 * Per databook, when we want to stop the gadget, if a control transfer
+	 * is still in process, complete it and get the core into setup phase.
+	 * In case the host is unresponsive to a SETUP transaction, forcefully
+	 * stall the transfer, and move back to the SETUP phase, so that any
+	 * pending endxfers can be executed.
+	 */
+	if (dwc->ep0state != EP0_SETUP_PHASE) {
+		reinit_completion(&dwc->ep0_in_setup);
+
+		ret = wait_for_completion_timeout(&dwc->ep0_in_setup,
+				msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT));
+		if (ret == 0) {
+			dev_warn(dwc->dev, "wait for SETUP phase timed out\n");
+			spin_lock_irqsave(&dwc->lock, flags);
+			dwc3_ep0_reset_state(dwc);
+			spin_unlock_irqrestore(&dwc->lock, flags);
+		}
+	}
+
+	/*
+	 * Note: if the GEVNTCOUNT indicates events in the event buffer, the
+	 * driver needs to acknowledge them before the controller can halt.
+	 * Simply let the interrupt handler acknowledges and handle the
+	 * remaining event generated by the controller while polling for
+	 * DSTS.DEVCTLHLT.
+	 */
+	ret = dwc3_gadget_run_stop(dwc, false);
+
+	/*
+	 * Stop the gadget after controller is halted, so that if needed, the
+	 * events to update EP0 state can still occur while the run/stop
+	 * routine polls for the halted state.  DEVTEN is cleared as part of
+	 * gadget stop.
+	 */
+	spin_lock_irqsave(&dwc->lock, flags);
+	__dwc3_gadget_stop(dwc);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static int dwc3_gadget_soft_connect(struct dwc3 *dwc)
+{
+	/*
+	 * In the Synopsys DWC_usb31 1.90a programming guide section
+	 * 4.1.9, it specifies that for a reconnect after a
+	 * device-initiated disconnect requires a core soft reset
+	 * (DCTL.CSftRst) before enabling the run/stop bit.
+	 */
+	dwc3_core_soft_reset(dwc);
+
+	dwc3_event_buffers_setup(dwc);
+	__dwc3_gadget_start(dwc);
+	return dwc3_gadget_run_stop(dwc, true);
+}
+
+static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	int			ret;
+
+	is_on = !!is_on;
+
+	dwc->softconnect = is_on;
+
+	/*
+	 * Avoid issuing a runtime resume if the device is already in the
+	 * suspended state during gadget disconnect.  DWC3 gadget was already
+	 * halted/stopped during runtime suspend.
+	 */
+	if (!is_on) {
+		pm_runtime_barrier(dwc->dev);
+		if (pm_runtime_suspended(dwc->dev))
+			return 0;
+	}
+
+	/*
+	 * Check the return value for successful resume, or error.  For a
+	 * successful resume, the DWC3 runtime PM resume routine will handle
+	 * the run stop sequence, so avoid duplicate operations here.
+	 */
+	ret = pm_runtime_get_sync(dwc->dev);
+	if (!ret || ret < 0) {
+		pm_runtime_put(dwc->dev);
+		if (ret < 0)
+			pm_runtime_set_suspended(dwc->dev);
+		return ret;
+	}
+
+	if (dwc->pullups_connected == is_on) {
+		pm_runtime_put(dwc->dev);
+		return 0;
+	}
+
+	synchronize_irq(dwc->irq_gadget);
+
+	if (!is_on)
+		ret = dwc3_gadget_soft_disconnect(dwc);
+	else
+		ret = dwc3_gadget_soft_connect(dwc);
+
+	pm_runtime_put(dwc->dev);
+
+	return ret;
+}
+
+static void dwc3_gadget_enable_irq(struct dwc3 *dwc)
+{
+	u32			reg;
+
+	/* Enable all but Start and End of Frame IRQs */
+	reg = (DWC3_DEVTEN_EVNTOVERFLOWEN |
+			DWC3_DEVTEN_CMDCMPLTEN |
+			DWC3_DEVTEN_ERRTICERREN |
+			DWC3_DEVTEN_WKUPEVTEN |
+			DWC3_DEVTEN_CONNECTDONEEN |
+			DWC3_DEVTEN_USBRSTEN |
+			DWC3_DEVTEN_DISCONNEVTEN);
+
+	if (DWC3_VER_IS_PRIOR(DWC3, 250A))
+		reg |= DWC3_DEVTEN_ULSTCNGEN;
+
+	/* On 2.30a and above this bit enables U3/L2-L1 Suspend Events */
+	if (!DWC3_VER_IS_PRIOR(DWC3, 230A))
+		reg |= DWC3_DEVTEN_U3L2L1SUSPEN;
+
+	dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
+}
+
+static void dwc3_gadget_disable_irq(struct dwc3 *dwc)
+{
+	/* mask all interrupts */
+	dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
+}
+
+static irqreturn_t dwc3_interrupt(int irq, void *_dwc);
+static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc);
+
+/**
+ * dwc3_gadget_setup_nump - calculate and initialize NUMP field of %DWC3_DCFG
+ * @dwc: pointer to our context structure
+ *
+ * The following looks like complex but it's actually very simple. In order to
+ * calculate the number of packets we can burst at once on OUT transfers, we're
+ * gonna use RxFIFO size.
+ *
+ * To calculate RxFIFO size we need two numbers:
+ * MDWIDTH = size, in bits, of the internal memory bus
+ * RAM2_DEPTH = depth, in MDWIDTH, of internal RAM2 (where RxFIFO sits)
+ *
+ * Given these two numbers, the formula is simple:
+ *
+ * RxFIFO Size = (RAM2_DEPTH * MDWIDTH / 8) - 24 - 16;
+ *
+ * 24 bytes is for 3x SETUP packets
+ * 16 bytes is a clock domain crossing tolerance
+ *
+ * Given RxFIFO Size, NUMP = RxFIFOSize / 1024;
+ */
+static void dwc3_gadget_setup_nump(struct dwc3 *dwc)
+{
+	u32 ram2_depth;
+	u32 mdwidth;
+	u32 nump;
+	u32 reg;
+
+	ram2_depth = DWC3_GHWPARAMS7_RAM2_DEPTH(dwc->hwparams.hwparams7);
+	mdwidth = dwc3_mdwidth(dwc);
+
+	nump = ((ram2_depth * mdwidth / 8) - 24 - 16) / 1024;
+	nump = min_t(u32, nump, 16);
+
+	/* update NumP */
+	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+	reg &= ~DWC3_DCFG_NUMP_MASK;
+	reg |= nump << DWC3_DCFG_NUMP_SHIFT;
+	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+}
+
+static int __dwc3_gadget_start(struct dwc3 *dwc)
+{
+	struct dwc3_ep		*dep;
+	int			ret = 0;
+	u32			reg;
+
+	/*
+	 * Use IMOD if enabled via dwc->imod_interval. Otherwise, if
+	 * the core supports IMOD, disable it.
+	 */
+	if (dwc->imod_interval) {
+		dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), dwc->imod_interval);
+		dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), DWC3_GEVNTCOUNT_EHB);
+	} else if (dwc3_has_imod(dwc)) {
+		dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), 0);
+	}
+
+	/*
+	 * We are telling dwc3 that we want to use DCFG.NUMP as ACK TP's NUMP
+	 * field instead of letting dwc3 itself calculate that automatically.
+	 *
+	 * This way, we maximize the chances that we'll be able to get several
+	 * bursts of data without going through any sort of endpoint throttling.
+	 */
+	reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
+	if (DWC3_IP_IS(DWC3))
+		reg &= ~DWC3_GRXTHRCFG_PKTCNTSEL;
+	else
+		reg &= ~DWC31_GRXTHRCFG_PKTCNTSEL;
+
+	dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
+
+	dwc3_gadget_setup_nump(dwc);
+
+	/*
+	 * Currently the controller handles single stream only. So, Ignore
+	 * Packet Pending bit for stream selection and don't search for another
+	 * stream if the host sends Data Packet with PP=0 (for OUT direction) or
+	 * ACK with NumP=0 and PP=0 (for IN direction). This slightly improves
+	 * the stream performance.
+	 */
+	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+	reg |= DWC3_DCFG_IGNSTRMPP;
+	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+
+	/* Enable MST by default if the device is capable of MST */
+	if (DWC3_MST_CAPABLE(&dwc->hwparams)) {
+		reg = dwc3_readl(dwc->regs, DWC3_DCFG1);
+		reg &= ~DWC3_DCFG1_DIS_MST_ENH;
+		dwc3_writel(dwc->regs, DWC3_DCFG1, reg);
+	}
+
+	/* Start with SuperSpeed Default */
+	dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
+
+	dep = dwc->eps[0];
+	dep->flags = 0;
+	ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT);
+	if (ret) {
+		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
+		goto err0;
+	}
+
+	dep = dwc->eps[1];
+	dep->flags = 0;
+	ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT);
+	if (ret) {
+		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
+		goto err1;
+	}
+
+	/* begin to receive SETUP packets */
+	dwc->ep0state = EP0_SETUP_PHASE;
+	dwc->ep0_bounced = false;
+	dwc->link_state = DWC3_LINK_STATE_SS_DIS;
+	dwc->delayed_status = false;
+	dwc3_ep0_out_start(dwc);
+
+	dwc3_gadget_enable_irq(dwc);
+
+	return 0;
+
+err1:
+	__dwc3_gadget_ep_disable(dwc->eps[0]);
+
+err0:
+	return ret;
+}
+
+static int dwc3_gadget_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+	int			ret;
+	int			irq;
+
+	irq = dwc->irq_gadget;
+	ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
+			IRQF_SHARED, "dwc3", dwc->ev_buf);
+	if (ret) {
+		dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
+				irq, ret);
+		return ret;
+	}
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc->gadget_driver	= driver;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
+}
+
+static void __dwc3_gadget_stop(struct dwc3 *dwc)
+{
+	dwc3_gadget_disable_irq(dwc);
+	__dwc3_gadget_ep_disable(dwc->eps[0]);
+	__dwc3_gadget_ep_disable(dwc->eps[1]);
+}
+
+static int dwc3_gadget_stop(struct usb_gadget *g)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc->gadget_driver	= NULL;
+	dwc->max_cfg_eps = 0;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	free_irq(dwc->irq_gadget, dwc->ev_buf);
+
+	return 0;
+}
+
+static void dwc3_gadget_config_params(struct usb_gadget *g,
+				      struct usb_dcd_config_params *params)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+
+	params->besl_baseline = USB_DEFAULT_BESL_UNSPECIFIED;
+	params->besl_deep = USB_DEFAULT_BESL_UNSPECIFIED;
+
+	/* Recommended BESL */
+	if (!dwc->dis_enblslpm_quirk) {
+		/*
+		 * If the recommended BESL baseline is 0 or if the BESL deep is
+		 * less than 2, Microsoft's Windows 10 host usb stack will issue
+		 * a usb reset immediately after it receives the extended BOS
+		 * descriptor and the enumeration will fail. To maintain
+		 * compatibility with the Windows' usb stack, let's set the
+		 * recommended BESL baseline to 1 and clamp the BESL deep to be
+		 * within 2 to 15.
+		 */
+		params->besl_baseline = 1;
+		if (dwc->is_utmi_l1_suspend)
+			params->besl_deep =
+				clamp_t(u8, dwc->hird_threshold, 2, 15);
+	}
+
+	/* U1 Device exit Latency */
+	if (dwc->dis_u1_entry_quirk)
+		params->bU1devExitLat = 0;
+	else
+		params->bU1devExitLat = DWC3_DEFAULT_U1_DEV_EXIT_LAT;
+
+	/* U2 Device exit Latency */
+	if (dwc->dis_u2_entry_quirk)
+		params->bU2DevExitLat = 0;
+	else
+		params->bU2DevExitLat =
+				cpu_to_le16(DWC3_DEFAULT_U2_DEV_EXIT_LAT);
+}
+
+static void dwc3_gadget_set_speed(struct usb_gadget *g,
+				  enum usb_device_speed speed)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc->gadget_max_speed = speed;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+}
+
+static void dwc3_gadget_set_ssp_rate(struct usb_gadget *g,
+				     enum usb_ssp_rate rate)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc->gadget_max_speed = USB_SPEED_SUPER_PLUS;
+	dwc->gadget_ssp_rate = rate;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+}
+
+static int dwc3_gadget_vbus_draw(struct usb_gadget *g, unsigned int mA)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	union power_supply_propval	val = {0};
+	int				ret;
+
+	if (dwc->usb2_phy)
+		return usb_phy_set_power(dwc->usb2_phy, mA);
+
+	if (!dwc->usb_psy)
+		return -EOPNOTSUPP;
+
+	val.intval = 1000 * mA;
+	ret = power_supply_set_property(dwc->usb_psy, POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, &val);
+
+	return ret;
+}
+
+/**
+ * dwc3_gadget_check_config - ensure dwc3 can support the USB configuration
+ * @g: pointer to the USB gadget
+ *
+ * Used to record the maximum number of endpoints being used in a USB composite
+ * device. (across all configurations)  This is to be used in the calculation
+ * of the TXFIFO sizes when resizing internal memory for individual endpoints.
+ * It will help ensured that the resizing logic reserves enough space for at
+ * least one max packet.
+ */
+static int dwc3_gadget_check_config(struct usb_gadget *g)
+{
+	struct dwc3 *dwc = gadget_to_dwc(g);
+	struct usb_ep *ep;
+	int fifo_size = 0;
+	int ram1_depth;
+	int ep_num = 0;
+
+	if (!dwc->do_fifo_resize)
+		return 0;
+
+	list_for_each_entry(ep, &g->ep_list, ep_list) {
+		/* Only interested in the IN endpoints */
+		if (ep->claimed && (ep->address & USB_DIR_IN))
+			ep_num++;
+	}
+
+	if (ep_num <= dwc->max_cfg_eps)
+		return 0;
+
+	/* Update the max number of eps in the composition */
+	dwc->max_cfg_eps = ep_num;
+
+	fifo_size = dwc3_gadget_calc_tx_fifo_size(dwc, dwc->max_cfg_eps);
+	/* Based on the equation, increment by one for every ep */
+	fifo_size += dwc->max_cfg_eps;
+
+	/* Check if we can fit a single fifo per endpoint */
+	ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
+	if (fifo_size > ram1_depth)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void dwc3_gadget_async_callbacks(struct usb_gadget *g, bool enable)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc->async_callbacks = enable;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+}
+
+static const struct usb_gadget_ops dwc3_gadget_ops = {
+	.get_frame		= dwc3_gadget_get_frame,
+	.wakeup			= dwc3_gadget_wakeup,
+	.set_selfpowered	= dwc3_gadget_set_selfpowered,
+	.pullup			= dwc3_gadget_pullup,
+	.udc_start		= dwc3_gadget_start,
+	.udc_stop		= dwc3_gadget_stop,
+	.udc_set_speed		= dwc3_gadget_set_speed,
+	.udc_set_ssp_rate	= dwc3_gadget_set_ssp_rate,
+	.get_config_params	= dwc3_gadget_config_params,
+	.vbus_draw		= dwc3_gadget_vbus_draw,
+	.check_config		= dwc3_gadget_check_config,
+	.udc_async_callbacks	= dwc3_gadget_async_callbacks,
+};
+
+/* -------------------------------------------------------------------------- */
+
+static int dwc3_gadget_init_control_endpoint(struct dwc3_ep *dep)
+{
+	struct dwc3 *dwc = dep->dwc;
+
+	usb_ep_set_maxpacket_limit(&dep->endpoint, 512);
+	dep->endpoint.maxburst = 1;
+	dep->endpoint.ops = &dwc3_gadget_ep0_ops;
+	if (!dep->direction)
+		dwc->gadget->ep0 = &dep->endpoint;
+
+	dep->endpoint.caps.type_control = true;
+
+	return 0;
+}
+
+static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
+{
+	struct dwc3 *dwc = dep->dwc;
+	u32 mdwidth;
+	int size;
+	int maxpacket;
+
+	mdwidth = dwc3_mdwidth(dwc);
+
+	/* MDWIDTH is represented in bits, we need it in bytes */
+	mdwidth /= 8;
+
+	size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1));
+	if (DWC3_IP_IS(DWC3))
+		size = DWC3_GTXFIFOSIZ_TXFDEP(size);
+	else
+		size = DWC31_GTXFIFOSIZ_TXFDEP(size);
+
+	/*
+	 * maxpacket size is determined as part of the following, after assuming
+	 * a mult value of one maxpacket:
+	 * DWC3 revision 280A and prior:
+	 * fifo_size = mult * (max_packet / mdwidth) + 1;
+	 * maxpacket = mdwidth * (fifo_size - 1);
+	 *
+	 * DWC3 revision 290A and onwards:
+	 * fifo_size = mult * ((max_packet + mdwidth)/mdwidth + 1) + 1
+	 * maxpacket = mdwidth * ((fifo_size - 1) - 1) - mdwidth;
+	 */
+	if (DWC3_VER_IS_PRIOR(DWC3, 290A))
+		maxpacket = mdwidth * (size - 1);
+	else
+		maxpacket = mdwidth * ((size - 1) - 1) - mdwidth;
+
+	/* Functionally, space for one max packet is sufficient */
+	size = min_t(int, maxpacket, 1024);
+	usb_ep_set_maxpacket_limit(&dep->endpoint, size);
+
+	dep->endpoint.max_streams = 16;
+	dep->endpoint.ops = &dwc3_gadget_ep_ops;
+	list_add_tail(&dep->endpoint.ep_list,
+			&dwc->gadget->ep_list);
+	dep->endpoint.caps.type_iso = true;
+	dep->endpoint.caps.type_bulk = true;
+	dep->endpoint.caps.type_int = true;
+
+	return dwc3_alloc_trb_pool(dep);
+}
+
+static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep)
+{
+	struct dwc3 *dwc = dep->dwc;
+	u32 mdwidth;
+	int size;
+
+	mdwidth = dwc3_mdwidth(dwc);
+
+	/* MDWIDTH is represented in bits, convert to bytes */
+	mdwidth /= 8;
+
+	/* All OUT endpoints share a single RxFIFO space */
+	size = dwc3_readl(dwc->regs, DWC3_GRXFIFOSIZ(0));
+	if (DWC3_IP_IS(DWC3))
+		size = DWC3_GRXFIFOSIZ_RXFDEP(size);
+	else
+		size = DWC31_GRXFIFOSIZ_RXFDEP(size);
+
+	/* FIFO depth is in MDWDITH bytes */
+	size *= mdwidth;
+
+	/*
+	 * To meet performance requirement, a minimum recommended RxFIFO size
+	 * is defined as follow:
+	 * RxFIFO size >= (3 x MaxPacketSize) +
+	 * (3 x 8 bytes setup packets size) + (16 bytes clock crossing margin)
+	 *
+	 * Then calculate the max packet limit as below.
+	 */
+	size -= (3 * 8) + 16;
+	if (size < 0)
+		size = 0;
+	else
+		size /= 3;
+
+	usb_ep_set_maxpacket_limit(&dep->endpoint, size);
+	dep->endpoint.max_streams = 16;
+	dep->endpoint.ops = &dwc3_gadget_ep_ops;
+	list_add_tail(&dep->endpoint.ep_list,
+			&dwc->gadget->ep_list);
+	dep->endpoint.caps.type_iso = true;
+	dep->endpoint.caps.type_bulk = true;
+	dep->endpoint.caps.type_int = true;
+
+	return dwc3_alloc_trb_pool(dep);
+}
+
+static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum)
+{
+	struct dwc3_ep			*dep;
+	bool				direction = epnum & 1;
+	int				ret;
+	u8				num = epnum >> 1;
+
+	dep = kzalloc(sizeof(*dep), GFP_KERNEL);
+	if (!dep)
+		return -ENOMEM;
+
+	dep->dwc = dwc;
+	dep->number = epnum;
+	dep->direction = direction;
+	dep->regs = dwc->regs + DWC3_DEP_BASE(epnum);
+	dwc->eps[epnum] = dep;
+	dep->combo_num = 0;
+	dep->start_cmd_status = 0;
+
+	snprintf(dep->name, sizeof(dep->name), "ep%u%s", num,
+			direction ? "in" : "out");
+
+	dep->endpoint.name = dep->name;
+
+	if (!(dep->number > 1)) {
+		dep->endpoint.desc = &dwc3_gadget_ep0_desc;
+		dep->endpoint.comp_desc = NULL;
+	}
+
+	if (num == 0)
+		ret = dwc3_gadget_init_control_endpoint(dep);
+	else if (direction)
+		ret = dwc3_gadget_init_in_endpoint(dep);
+	else
+		ret = dwc3_gadget_init_out_endpoint(dep);
+
+	if (ret)
+		return ret;
+
+	dep->endpoint.caps.dir_in = direction;
+	dep->endpoint.caps.dir_out = !direction;
+
+	INIT_LIST_HEAD(&dep->pending_list);
+	INIT_LIST_HEAD(&dep->started_list);
+	INIT_LIST_HEAD(&dep->cancelled_list);
+
+	dwc3_debugfs_create_endpoint_dir(dep);
+
+	return 0;
+}
+
+static int dwc3_gadget_init_endpoints(struct dwc3 *dwc, u8 total)
+{
+	u8				epnum;
+
+	INIT_LIST_HEAD(&dwc->gadget->ep_list);
+
+	for (epnum = 0; epnum < total; epnum++) {
+		int			ret;
+
+		ret = dwc3_gadget_init_endpoint(dwc, epnum);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
+{
+	struct dwc3_ep			*dep;
+	u8				epnum;
+
+	for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
+		dep = dwc->eps[epnum];
+		if (!dep)
+			continue;
+		/*
+		 * Physical endpoints 0 and 1 are special; they form the
+		 * bi-directional USB endpoint 0.
+		 *
+		 * For those two physical endpoints, we don't allocate a TRB
+		 * pool nor do we add them the endpoints list. Due to that, we
+		 * shouldn't do these two operations otherwise we would end up
+		 * with all sorts of bugs when removing dwc3.ko.
+		 */
+		if (epnum != 0 && epnum != 1) {
+			dwc3_free_trb_pool(dep);
+			list_del(&dep->endpoint.ep_list);
+		}
+
+		dwc3_debugfs_remove_endpoint_dir(dep);
+		kfree(dep);
+	}
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep,
+		struct dwc3_request *req, struct dwc3_trb *trb,
+		const struct dwc3_event_depevt *event, int status, int chain)
+{
+	unsigned int		count;
+
+	dwc3_ep_inc_deq(dep);
+
+	trace_dwc3_complete_trb(dep, trb);
+	req->num_trbs--;
+
+	/*
+	 * If we're in the middle of series of chained TRBs and we
+	 * receive a short transfer along the way, DWC3 will skip
+	 * through all TRBs including the last TRB in the chain (the
+	 * where CHN bit is zero. DWC3 will also avoid clearing HWO
+	 * bit and SW has to do it manually.
+	 *
+	 * We're going to do that here to avoid problems of HW trying
+	 * to use bogus TRBs for transfers.
+	 */
+	if (chain && (trb->ctrl & DWC3_TRB_CTRL_HWO))
+		trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+
+	/*
+	 * For isochronous transfers, the first TRB in a service interval must
+	 * have the Isoc-First type. Track and report its interval frame number.
+	 */
+	if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
+	    (trb->ctrl & DWC3_TRBCTL_ISOCHRONOUS_FIRST)) {
+		unsigned int frame_number;
+
+		frame_number = DWC3_TRB_CTRL_GET_SID_SOFN(trb->ctrl);
+		frame_number &= ~(dep->interval - 1);
+		req->request.frame_number = frame_number;
+	}
+
+	/*
+	 * We use bounce buffer for requests that needs extra TRB or OUT ZLP. If
+	 * this TRB points to the bounce buffer address, it's a MPS alignment
+	 * TRB. Don't add it to req->remaining calculation.
+	 */
+	if (trb->bpl == lower_32_bits(dep->dwc->bounce_addr) &&
+	    trb->bph == upper_32_bits(dep->dwc->bounce_addr)) {
+		trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+		return 1;
+	}
+
+	count = trb->size & DWC3_TRB_SIZE_MASK;
+	req->remaining += count;
+
+	if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
+		return 1;
+
+	if (event->status & DEPEVT_STATUS_SHORT && !chain)
+		return 1;
+
+	if ((trb->ctrl & DWC3_TRB_CTRL_ISP_IMI) &&
+	    DWC3_TRB_SIZE_TRBSTS(trb->size) == DWC3_TRBSTS_MISSED_ISOC)
+		return 1;
+
+	if ((trb->ctrl & DWC3_TRB_CTRL_IOC) ||
+	    (trb->ctrl & DWC3_TRB_CTRL_LST))
+		return 1;
+
+	return 0;
+}
+
+static int dwc3_gadget_ep_reclaim_trb_sg(struct dwc3_ep *dep,
+		struct dwc3_request *req, const struct dwc3_event_depevt *event,
+		int status)
+{
+	struct dwc3_trb *trb = &dep->trb_pool[dep->trb_dequeue];
+	struct scatterlist *sg = req->sg;
+	struct scatterlist *s;
+	unsigned int num_queued = req->num_queued_sgs;
+	unsigned int i;
+	int ret = 0;
+
+	for_each_sg(sg, s, num_queued, i) {
+		trb = &dep->trb_pool[dep->trb_dequeue];
+
+		req->sg = sg_next(s);
+		req->num_queued_sgs--;
+
+		ret = dwc3_gadget_ep_reclaim_completed_trb(dep, req,
+				trb, event, status, true);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+static int dwc3_gadget_ep_reclaim_trb_linear(struct dwc3_ep *dep,
+		struct dwc3_request *req, const struct dwc3_event_depevt *event,
+		int status)
+{
+	struct dwc3_trb *trb = &dep->trb_pool[dep->trb_dequeue];
+
+	return dwc3_gadget_ep_reclaim_completed_trb(dep, req, trb,
+			event, status, false);
+}
+
+static bool dwc3_gadget_ep_request_completed(struct dwc3_request *req)
+{
+	return req->num_pending_sgs == 0 && req->num_queued_sgs == 0;
+}
+
+static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
+		const struct dwc3_event_depevt *event,
+		struct dwc3_request *req, int status)
+{
+	int request_status;
+	int ret;
+
+	if (req->request.num_mapped_sgs)
+		ret = dwc3_gadget_ep_reclaim_trb_sg(dep, req, event,
+				status);
+	else
+		ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event,
+				status);
+
+	req->request.actual = req->request.length - req->remaining;
+
+	if (!dwc3_gadget_ep_request_completed(req))
+		goto out;
+
+	if (req->needs_extra_trb) {
+		ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event,
+				status);
+		req->needs_extra_trb = false;
+	}
+
+	/*
+	 * The event status only reflects the status of the TRB with IOC set.
+	 * For the requests that don't set interrupt on completion, the driver
+	 * needs to check and return the status of the completed TRBs associated
+	 * with the request. Use the status of the last TRB of the request.
+	 */
+	if (req->request.no_interrupt) {
+		struct dwc3_trb *trb;
+
+		trb = dwc3_ep_prev_trb(dep, dep->trb_dequeue);
+		switch (DWC3_TRB_SIZE_TRBSTS(trb->size)) {
+		case DWC3_TRBSTS_MISSED_ISOC:
+			/* Isoc endpoint only */
+			request_status = -EXDEV;
+			break;
+		case DWC3_TRB_STS_XFER_IN_PROG:
+			/* Applicable when End Transfer with ForceRM=0 */
+		case DWC3_TRBSTS_SETUP_PENDING:
+			/* Control endpoint only */
+		case DWC3_TRBSTS_OK:
+		default:
+			request_status = 0;
+			break;
+		}
+	} else {
+		request_status = status;
+	}
+
+	dwc3_gadget_giveback(dep, req, request_status);
+
+out:
+	return ret;
+}
+
+static void dwc3_gadget_ep_cleanup_completed_requests(struct dwc3_ep *dep,
+		const struct dwc3_event_depevt *event, int status)
+{
+	struct dwc3_request	*req;
+
+	while (!list_empty(&dep->started_list)) {
+		int ret;
+
+		req = next_request(&dep->started_list);
+		ret = dwc3_gadget_ep_cleanup_completed_request(dep, event,
+				req, status);
+		if (ret)
+			break;
+		/*
+		 * The endpoint is disabled, let the dwc3_remove_requests()
+		 * handle the cleanup.
+		 */
+		if (!dep->endpoint.desc)
+			break;
+	}
+}
+
+static bool dwc3_gadget_ep_should_continue(struct dwc3_ep *dep)
+{
+	struct dwc3_request	*req;
+	struct dwc3		*dwc = dep->dwc;
+
+	if (!dep->endpoint.desc || !dwc->pullups_connected ||
+	    !dwc->connected)
+		return false;
+
+	if (!list_empty(&dep->pending_list))
+		return true;
+
+	/*
+	 * We only need to check the first entry of the started list. We can
+	 * assume the completed requests are removed from the started list.
+	 */
+	req = next_request(&dep->started_list);
+	if (!req)
+		return false;
+
+	return !dwc3_gadget_ep_request_completed(req);
+}
+
+static void dwc3_gadget_endpoint_frame_from_event(struct dwc3_ep *dep,
+		const struct dwc3_event_depevt *event)
+{
+	dep->frame_number = event->parameters;
+}
+
+static bool dwc3_gadget_endpoint_trbs_complete(struct dwc3_ep *dep,
+		const struct dwc3_event_depevt *event, int status)
+{
+	struct dwc3		*dwc = dep->dwc;
+	bool			no_started_trb = true;
+
+	dwc3_gadget_ep_cleanup_completed_requests(dep, event, status);
+
+	if (dep->flags & DWC3_EP_END_TRANSFER_PENDING)
+		goto out;
+
+	if (!dep->endpoint.desc)
+		return no_started_trb;
+
+	if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
+		list_empty(&dep->started_list) &&
+		(list_empty(&dep->pending_list) || status == -EXDEV))
+		dwc3_stop_active_transfer(dep, true, true);
+	else if (dwc3_gadget_ep_should_continue(dep))
+		if (__dwc3_gadget_kick_transfer(dep) == 0)
+			no_started_trb = false;
+
+out:
+	/*
+	 * WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround.
+	 * See dwc3_gadget_linksts_change_interrupt() for 1st half.
+	 */
+	if (DWC3_VER_IS_PRIOR(DWC3, 183A)) {
+		u32		reg;
+		int		i;
+
+		for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
+			dep = dwc->eps[i];
+
+			if (!(dep->flags & DWC3_EP_ENABLED))
+				continue;
+
+			if (!list_empty(&dep->started_list))
+				return no_started_trb;
+		}
+
+		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+		reg |= dwc->u1u2;
+		dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+		dwc->u1u2 = 0;
+	}
+
+	return no_started_trb;
+}
+
+static void dwc3_gadget_endpoint_transfer_in_progress(struct dwc3_ep *dep,
+		const struct dwc3_event_depevt *event)
+{
+	int status = 0;
+
+	if (!dep->endpoint.desc)
+		return;
+
+	if (usb_endpoint_xfer_isoc(dep->endpoint.desc))
+		dwc3_gadget_endpoint_frame_from_event(dep, event);
+
+	if (event->status & DEPEVT_STATUS_BUSERR)
+		status = -ECONNRESET;
+
+	if (event->status & DEPEVT_STATUS_MISSED_ISOC)
+		status = -EXDEV;
+
+	dwc3_gadget_endpoint_trbs_complete(dep, event, status);
+}
+
+static void dwc3_gadget_endpoint_transfer_complete(struct dwc3_ep *dep,
+		const struct dwc3_event_depevt *event)
+{
+	int status = 0;
+
+	dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
+
+	if (event->status & DEPEVT_STATUS_BUSERR)
+		status = -ECONNRESET;
+
+	if (dwc3_gadget_endpoint_trbs_complete(dep, event, status))
+		dep->flags &= ~DWC3_EP_WAIT_TRANSFER_COMPLETE;
+}
+
+static void dwc3_gadget_endpoint_transfer_not_ready(struct dwc3_ep *dep,
+		const struct dwc3_event_depevt *event)
+{
+	dwc3_gadget_endpoint_frame_from_event(dep, event);
+
+	/*
+	 * The XferNotReady event is generated only once before the endpoint
+	 * starts. It will be generated again when END_TRANSFER command is
+	 * issued. For some controller versions, the XferNotReady event may be
+	 * generated while the END_TRANSFER command is still in process. Ignore
+	 * it and wait for the next XferNotReady event after the command is
+	 * completed.
+	 */
+	if (dep->flags & DWC3_EP_END_TRANSFER_PENDING)
+		return;
+
+	(void) __dwc3_gadget_start_isoc(dep);
+}
+
+static void dwc3_gadget_endpoint_command_complete(struct dwc3_ep *dep,
+		const struct dwc3_event_depevt *event)
+{
+	u8 cmd = DEPEVT_PARAMETER_CMD(event->parameters);
+
+	if (cmd != DWC3_DEPCMD_ENDTRANSFER)
+		return;
+
+	/*
+	 * The END_TRANSFER command will cause the controller to generate a
+	 * NoStream Event, and it's not due to the host DP NoStream rejection.
+	 * Ignore the next NoStream event.
+	 */
+	if (dep->stream_capable)
+		dep->flags |= DWC3_EP_IGNORE_NEXT_NOSTREAM;
+
+	dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
+	dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
+	dwc3_gadget_ep_cleanup_cancelled_requests(dep);
+
+	if (dep->flags & DWC3_EP_PENDING_CLEAR_STALL) {
+		struct dwc3 *dwc = dep->dwc;
+
+		dep->flags &= ~DWC3_EP_PENDING_CLEAR_STALL;
+		if (dwc3_send_clear_stall_ep_cmd(dep)) {
+			struct usb_ep *ep0 = &dwc->eps[0]->endpoint;
+
+			dev_err(dwc->dev, "failed to clear STALL on %s\n", dep->name);
+			if (dwc->delayed_status)
+				__dwc3_gadget_ep0_set_halt(ep0, 1);
+			return;
+		}
+
+		dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
+		if (dwc->clear_stall_protocol == dep->number)
+			dwc3_ep0_send_delayed_status(dwc);
+	}
+
+	if ((dep->flags & DWC3_EP_DELAY_START) &&
+	    !usb_endpoint_xfer_isoc(dep->endpoint.desc))
+		__dwc3_gadget_kick_transfer(dep);
+
+	dep->flags &= ~DWC3_EP_DELAY_START;
+}
+
+static void dwc3_gadget_endpoint_stream_event(struct dwc3_ep *dep,
+		const struct dwc3_event_depevt *event)
+{
+	struct dwc3 *dwc = dep->dwc;
+
+	if (event->status == DEPEVT_STREAMEVT_FOUND) {
+		dep->flags |= DWC3_EP_FIRST_STREAM_PRIMED;
+		goto out;
+	}
+
+	/* Note: NoStream rejection event param value is 0 and not 0xFFFF */
+	switch (event->parameters) {
+	case DEPEVT_STREAM_PRIME:
+		/*
+		 * If the host can properly transition the endpoint state from
+		 * idle to prime after a NoStream rejection, there's no need to
+		 * force restarting the endpoint to reinitiate the stream. To
+		 * simplify the check, assume the host follows the USB spec if
+		 * it primed the endpoint more than once.
+		 */
+		if (dep->flags & DWC3_EP_FORCE_RESTART_STREAM) {
+			if (dep->flags & DWC3_EP_FIRST_STREAM_PRIMED)
+				dep->flags &= ~DWC3_EP_FORCE_RESTART_STREAM;
+			else
+				dep->flags |= DWC3_EP_FIRST_STREAM_PRIMED;
+		}
+
+		break;
+	case DEPEVT_STREAM_NOSTREAM:
+		if ((dep->flags & DWC3_EP_IGNORE_NEXT_NOSTREAM) ||
+		    !(dep->flags & DWC3_EP_FORCE_RESTART_STREAM) ||
+		    (!DWC3_MST_CAPABLE(&dwc->hwparams) &&
+		     !(dep->flags & DWC3_EP_WAIT_TRANSFER_COMPLETE)))
+			break;
+
+		/*
+		 * If the host rejects a stream due to no active stream, by the
+		 * USB and xHCI spec, the endpoint will be put back to idle
+		 * state. When the host is ready (buffer added/updated), it will
+		 * prime the endpoint to inform the usb device controller. This
+		 * triggers the device controller to issue ERDY to restart the
+		 * stream. However, some hosts don't follow this and keep the
+		 * endpoint in the idle state. No prime will come despite host
+		 * streams are updated, and the device controller will not be
+		 * triggered to generate ERDY to move the next stream data. To
+		 * workaround this and maintain compatibility with various
+		 * hosts, force to reinitiate the stream until the host is ready
+		 * instead of waiting for the host to prime the endpoint.
+		 */
+		if (DWC3_VER_IS_WITHIN(DWC32, 100A, ANY)) {
+			unsigned int cmd = DWC3_DGCMD_SET_ENDPOINT_PRIME;
+
+			dwc3_send_gadget_generic_command(dwc, cmd, dep->number);
+		} else {
+			dep->flags |= DWC3_EP_DELAY_START;
+			dwc3_stop_active_transfer(dep, true, true);
+			return;
+		}
+		break;
+	}
+
+out:
+	dep->flags &= ~DWC3_EP_IGNORE_NEXT_NOSTREAM;
+}
+
+static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	struct dwc3_ep		*dep;
+	u8			epnum = event->endpoint_number;
+
+	dep = dwc->eps[epnum];
+
+	if (!(dep->flags & DWC3_EP_ENABLED)) {
+		if ((epnum > 1) && !(dep->flags & DWC3_EP_TRANSFER_STARTED))
+			return;
+
+		/* Handle only EPCMDCMPLT when EP disabled */
+		if ((event->endpoint_event != DWC3_DEPEVT_EPCMDCMPLT) &&
+			!(epnum <= 1 && event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE))
+			return;
+	}
+
+	if (epnum == 0 || epnum == 1) {
+		dwc3_ep0_interrupt(dwc, event);
+		return;
+	}
+
+	switch (event->endpoint_event) {
+	case DWC3_DEPEVT_XFERINPROGRESS:
+		dwc3_gadget_endpoint_transfer_in_progress(dep, event);
+		break;
+	case DWC3_DEPEVT_XFERNOTREADY:
+		dwc3_gadget_endpoint_transfer_not_ready(dep, event);
+		break;
+	case DWC3_DEPEVT_EPCMDCMPLT:
+		dwc3_gadget_endpoint_command_complete(dep, event);
+		break;
+	case DWC3_DEPEVT_XFERCOMPLETE:
+		dwc3_gadget_endpoint_transfer_complete(dep, event);
+		break;
+	case DWC3_DEPEVT_STREAMEVT:
+		dwc3_gadget_endpoint_stream_event(dep, event);
+		break;
+	case DWC3_DEPEVT_RXTXFIFOEVT:
+		break;
+	}
+}
+
+static void dwc3_disconnect_gadget(struct dwc3 *dwc)
+{
+	if (dwc->async_callbacks && dwc->gadget_driver->disconnect) {
+		spin_unlock(&dwc->lock);
+		dwc->gadget_driver->disconnect(dwc->gadget);
+		spin_lock(&dwc->lock);
+	}
+}
+
+static void dwc3_suspend_gadget(struct dwc3 *dwc)
+{
+	if (dwc->async_callbacks && dwc->gadget_driver->suspend) {
+		spin_unlock(&dwc->lock);
+		dwc->gadget_driver->suspend(dwc->gadget);
+		spin_lock(&dwc->lock);
+	}
+}
+
+static void dwc3_resume_gadget(struct dwc3 *dwc)
+{
+	if (dwc->async_callbacks && dwc->gadget_driver->resume) {
+		spin_unlock(&dwc->lock);
+		dwc->gadget_driver->resume(dwc->gadget);
+		spin_lock(&dwc->lock);
+	}
+}
+
+static void dwc3_reset_gadget(struct dwc3 *dwc)
+{
+	if (!dwc->gadget_driver)
+		return;
+
+	if (dwc->async_callbacks && dwc->gadget->speed != USB_SPEED_UNKNOWN) {
+		spin_unlock(&dwc->lock);
+		usb_gadget_udc_reset(dwc->gadget, dwc->gadget_driver);
+		spin_lock(&dwc->lock);
+	}
+}
+
+void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
+	bool interrupt)
+{
+	struct dwc3 *dwc = dep->dwc;
+
+	/*
+	 * Only issue End Transfer command to the control endpoint of a started
+	 * Data Phase. Typically we should only do so in error cases such as
+	 * invalid/unexpected direction as described in the control transfer
+	 * flow of the programming guide.
+	 */
+	if (dep->number <= 1 && dwc->ep0state != EP0_DATA_PHASE)
+		return;
+
+	if (interrupt && (dep->flags & DWC3_EP_DELAY_STOP))
+		return;
+
+	if (!(dep->flags & DWC3_EP_TRANSFER_STARTED) ||
+	    (dep->flags & DWC3_EP_END_TRANSFER_PENDING))
+		return;
+
+	/*
+	 * If a Setup packet is received but yet to DMA out, the controller will
+	 * not process the End Transfer command of any endpoint. Polling of its
+	 * DEPCMD.CmdAct may block setting up TRB for Setup packet, causing a
+	 * timeout. Delay issuing the End Transfer command until the Setup TRB is
+	 * prepared.
+	 */
+	if (dwc->ep0state != EP0_SETUP_PHASE && !dwc->delayed_status) {
+		dep->flags |= DWC3_EP_DELAY_STOP;
+		return;
+	}
+
+	/*
+	 * NOTICE: We are violating what the Databook says about the
+	 * EndTransfer command. Ideally we would _always_ wait for the
+	 * EndTransfer Command Completion IRQ, but that's causing too
+	 * much trouble synchronizing between us and gadget driver.
+	 *
+	 * We have discussed this with the IP Provider and it was
+	 * suggested to giveback all requests here.
+	 *
+	 * Note also that a similar handling was tested by Synopsys
+	 * (thanks a lot Paul) and nothing bad has come out of it.
+	 * In short, what we're doing is issuing EndTransfer with
+	 * CMDIOC bit set and delay kicking transfer until the
+	 * EndTransfer command had completed.
+	 *
+	 * As of IP version 3.10a of the DWC_usb3 IP, the controller
+	 * supports a mode to work around the above limitation. The
+	 * software can poll the CMDACT bit in the DEPCMD register
+	 * after issuing a EndTransfer command. This mode is enabled
+	 * by writing GUCTL2[14]. This polling is already done in the
+	 * dwc3_send_gadget_ep_cmd() function so if the mode is
+	 * enabled, the EndTransfer command will have completed upon
+	 * returning from this function.
+	 *
+	 * This mode is NOT available on the DWC_usb31 IP.  In this
+	 * case, if the IOC bit is not set, then delay by 1ms
+	 * after issuing the EndTransfer command.  This allows for the
+	 * controller to handle the command completely before DWC3
+	 * remove requests attempts to unmap USB request buffers.
+	 */
+
+	__dwc3_stop_active_transfer(dep, force, interrupt);
+}
+
+static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
+{
+	u32 epnum;
+
+	for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
+		struct dwc3_ep *dep;
+		int ret;
+
+		dep = dwc->eps[epnum];
+		if (!dep)
+			continue;
+
+		if (!(dep->flags & DWC3_EP_STALL))
+			continue;
+
+		dep->flags &= ~DWC3_EP_STALL;
+
+		ret = dwc3_send_clear_stall_ep_cmd(dep);
+		WARN_ON_ONCE(ret);
+	}
+}
+
+static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
+{
+	int			reg;
+
+	dwc->suspended = false;
+
+	dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RX_DET);
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	reg &= ~DWC3_DCTL_INITU1ENA;
+	reg &= ~DWC3_DCTL_INITU2ENA;
+	dwc3_gadget_dctl_write_safe(dwc, reg);
+
+	dwc->connected = false;
+
+	dwc3_disconnect_gadget(dwc);
+
+	dwc->gadget->speed = USB_SPEED_UNKNOWN;
+	dwc->setup_packet_pending = false;
+	usb_gadget_set_state(dwc->gadget, USB_STATE_NOTATTACHED);
+
+	dwc3_ep0_reset_state(dwc);
+
+	/*
+	 * Request PM idle to address condition where usage count is
+	 * already decremented to zero, but waiting for the disconnect
+	 * interrupt to set dwc->connected to FALSE.
+	 */
+	pm_request_idle(dwc->dev);
+}
+
+static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
+{
+	u32			reg;
+
+	dwc->suspended = false;
+
+	/*
+	 * Ideally, dwc3_reset_gadget() would trigger the function
+	 * drivers to stop any active transfers through ep disable.
+	 * However, for functions which defer ep disable, such as mass
+	 * storage, we will need to rely on the call to stop active
+	 * transfers here, and avoid allowing of request queuing.
+	 */
+	dwc->connected = false;
+
+	/*
+	 * WORKAROUND: DWC3 revisions <1.88a have an issue which
+	 * would cause a missing Disconnect Event if there's a
+	 * pending Setup Packet in the FIFO.
+	 *
+	 * There's no suggested workaround on the official Bug
+	 * report, which states that "unless the driver/application
+	 * is doing any special handling of a disconnect event,
+	 * there is no functional issue".
+	 *
+	 * Unfortunately, it turns out that we _do_ some special
+	 * handling of a disconnect event, namely complete all
+	 * pending transfers, notify gadget driver of the
+	 * disconnection, and so on.
+	 *
+	 * Our suggested workaround is to follow the Disconnect
+	 * Event steps here, instead, based on a setup_packet_pending
+	 * flag. Such flag gets set whenever we have a SETUP_PENDING
+	 * status for EP0 TRBs and gets cleared on XferComplete for the
+	 * same endpoint.
+	 *
+	 * Refers to:
+	 *
+	 * STAR#9000466709: RTL: Device : Disconnect event not
+	 * generated if setup packet pending in FIFO
+	 */
+	if (DWC3_VER_IS_PRIOR(DWC3, 188A)) {
+		if (dwc->setup_packet_pending)
+			dwc3_gadget_disconnect_interrupt(dwc);
+	}
+
+	dwc3_reset_gadget(dwc);
+
+	/*
+	 * From SNPS databook section 8.1.2, the EP0 should be in setup
+	 * phase. So ensure that EP0 is in setup phase by issuing a stall
+	 * and restart if EP0 is not in setup phase.
+	 */
+	dwc3_ep0_reset_state(dwc);
+
+	/*
+	 * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a
+	 * Section 4.1.2 Table 4-2, it states that during a USB reset, the SW
+	 * needs to ensure that it sends "a DEPENDXFER command for any active
+	 * transfers."
+	 */
+	dwc3_stop_active_transfers(dwc);
+	dwc->connected = true;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	reg &= ~DWC3_DCTL_TSTCTRL_MASK;
+	dwc3_gadget_dctl_write_safe(dwc, reg);
+	dwc->test_mode = false;
+	dwc3_clear_stall_all_ep(dwc);
+
+	/* Reset device address to zero */
+	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+	reg &= ~(DWC3_DCFG_DEVADDR_MASK);
+	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+}
+
+static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
+{
+	struct dwc3_ep		*dep;
+	int			ret;
+	u32			reg;
+	u8			lanes = 1;
+	u8			speed;
+
+	if (!dwc->softconnect)
+		return;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+	speed = reg & DWC3_DSTS_CONNECTSPD;
+	dwc->speed = speed;
+
+	if (DWC3_IP_IS(DWC32))
+		lanes = DWC3_DSTS_CONNLANES(reg) + 1;
+
+	dwc->gadget->ssp_rate = USB_SSP_GEN_UNKNOWN;
+
+	/*
+	 * RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed
+	 * each time on Connect Done.
+	 *
+	 * Currently we always use the reset value. If any platform
+	 * wants to set this to a different value, we need to add a
+	 * setting and update GCTL.RAMCLKSEL here.
+	 */
+
+	switch (speed) {
+	case DWC3_DSTS_SUPERSPEED_PLUS:
+		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
+		dwc->gadget->ep0->maxpacket = 512;
+		dwc->gadget->speed = USB_SPEED_SUPER_PLUS;
+
+		if (lanes > 1)
+			dwc->gadget->ssp_rate = USB_SSP_GEN_2x2;
+		else
+			dwc->gadget->ssp_rate = USB_SSP_GEN_2x1;
+		break;
+	case DWC3_DSTS_SUPERSPEED:
+		/*
+		 * WORKAROUND: DWC3 revisions <1.90a have an issue which
+		 * would cause a missing USB3 Reset event.
+		 *
+		 * In such situations, we should force a USB3 Reset
+		 * event by calling our dwc3_gadget_reset_interrupt()
+		 * routine.
+		 *
+		 * Refers to:
+		 *
+		 * STAR#9000483510: RTL: SS : USB3 reset event may
+		 * not be generated always when the link enters poll
+		 */
+		if (DWC3_VER_IS_PRIOR(DWC3, 190A))
+			dwc3_gadget_reset_interrupt(dwc);
+
+		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
+		dwc->gadget->ep0->maxpacket = 512;
+		dwc->gadget->speed = USB_SPEED_SUPER;
+
+		if (lanes > 1) {
+			dwc->gadget->speed = USB_SPEED_SUPER_PLUS;
+			dwc->gadget->ssp_rate = USB_SSP_GEN_1x2;
+		}
+		break;
+	case DWC3_DSTS_HIGHSPEED:
+		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
+		dwc->gadget->ep0->maxpacket = 64;
+		dwc->gadget->speed = USB_SPEED_HIGH;
+		break;
+	case DWC3_DSTS_FULLSPEED:
+		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
+		dwc->gadget->ep0->maxpacket = 64;
+		dwc->gadget->speed = USB_SPEED_FULL;
+		break;
+	}
+
+	dwc->eps[1]->endpoint.maxpacket = dwc->gadget->ep0->maxpacket;
+
+	/* Enable USB2 LPM Capability */
+
+	if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A) &&
+	    !dwc->usb2_gadget_lpm_disable &&
+	    (speed != DWC3_DSTS_SUPERSPEED) &&
+	    (speed != DWC3_DSTS_SUPERSPEED_PLUS)) {
+		reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+		reg |= DWC3_DCFG_LPM_CAP;
+		dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+
+		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+		reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN);
+
+		reg |= DWC3_DCTL_HIRD_THRES(dwc->hird_threshold |
+					    (dwc->is_utmi_l1_suspend << 4));
+
+		/*
+		 * When dwc3 revisions >= 2.40a, LPM Erratum is enabled and
+		 * DCFG.LPMCap is set, core responses with an ACK and the
+		 * BESL value in the LPM token is less than or equal to LPM
+		 * NYET threshold.
+		 */
+		WARN_ONCE(DWC3_VER_IS_PRIOR(DWC3, 240A) && dwc->has_lpm_erratum,
+				"LPM Erratum not available on dwc3 revisions < 2.40a\n");
+
+		if (dwc->has_lpm_erratum && !DWC3_VER_IS_PRIOR(DWC3, 240A))
+			reg |= DWC3_DCTL_NYET_THRES(dwc->lpm_nyet_threshold);
+
+		dwc3_gadget_dctl_write_safe(dwc, reg);
+	} else {
+		if (dwc->usb2_gadget_lpm_disable) {
+			reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+			reg &= ~DWC3_DCFG_LPM_CAP;
+			dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+		}
+
+		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+		reg &= ~DWC3_DCTL_HIRD_THRES_MASK;
+		dwc3_gadget_dctl_write_safe(dwc, reg);
+	}
+
+	dep = dwc->eps[0];
+	ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_MODIFY);
+	if (ret) {
+		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
+		return;
+	}
+
+	dep = dwc->eps[1];
+	ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_MODIFY);
+	if (ret) {
+		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
+		return;
+	}
+
+	/*
+	 * Configure PHY via GUSB3PIPECTLn if required.
+	 *
+	 * Update GTXFIFOSIZn
+	 *
+	 * In both cases reset values should be sufficient.
+	 */
+}
+
+static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
+{
+	dwc->suspended = false;
+
+	/*
+	 * TODO take core out of low power mode when that's
+	 * implemented.
+	 */
+
+	if (dwc->async_callbacks && dwc->gadget_driver->resume) {
+		spin_unlock(&dwc->lock);
+		dwc->gadget_driver->resume(dwc->gadget);
+		spin_lock(&dwc->lock);
+	}
+}
+
+static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
+		unsigned int evtinfo)
+{
+	enum dwc3_link_state	next = evtinfo & DWC3_LINK_STATE_MASK;
+	unsigned int		pwropt;
+
+	/*
+	 * WORKAROUND: DWC3 < 2.50a have an issue when configured without
+	 * Hibernation mode enabled which would show up when device detects
+	 * host-initiated U3 exit.
+	 *
+	 * In that case, device will generate a Link State Change Interrupt
+	 * from U3 to RESUME which is only necessary if Hibernation is
+	 * configured in.
+	 *
+	 * There are no functional changes due to such spurious event and we
+	 * just need to ignore it.
+	 *
+	 * Refers to:
+	 *
+	 * STAR#9000570034 RTL: SS Resume event generated in non-Hibernation
+	 * operational mode
+	 */
+	pwropt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1);
+	if (DWC3_VER_IS_PRIOR(DWC3, 250A) &&
+			(pwropt != DWC3_GHWPARAMS1_EN_PWROPT_HIB)) {
+		if ((dwc->link_state == DWC3_LINK_STATE_U3) &&
+				(next == DWC3_LINK_STATE_RESUME)) {
+			return;
+		}
+	}
+
+	/*
+	 * WORKAROUND: DWC3 Revisions <1.83a have an issue which, depending
+	 * on the link partner, the USB session might do multiple entry/exit
+	 * of low power states before a transfer takes place.
+	 *
+	 * Due to this problem, we might experience lower throughput. The
+	 * suggested workaround is to disable DCTL[12:9] bits if we're
+	 * transitioning from U1/U2 to U0 and enable those bits again
+	 * after a transfer completes and there are no pending transfers
+	 * on any of the enabled endpoints.
+	 *
+	 * This is the first half of that workaround.
+	 *
+	 * Refers to:
+	 *
+	 * STAR#9000446952: RTL: Device SS : if U1/U2 ->U0 takes >128us
+	 * core send LGO_Ux entering U0
+	 */
+	if (DWC3_VER_IS_PRIOR(DWC3, 183A)) {
+		if (next == DWC3_LINK_STATE_U0) {
+			u32	u1u2;
+			u32	reg;
+
+			switch (dwc->link_state) {
+			case DWC3_LINK_STATE_U1:
+			case DWC3_LINK_STATE_U2:
+				reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+				u1u2 = reg & (DWC3_DCTL_INITU2ENA
+						| DWC3_DCTL_ACCEPTU2ENA
+						| DWC3_DCTL_INITU1ENA
+						| DWC3_DCTL_ACCEPTU1ENA);
+
+				if (!dwc->u1u2)
+					dwc->u1u2 = reg & u1u2;
+
+				reg &= ~u1u2;
+
+				dwc3_gadget_dctl_write_safe(dwc, reg);
+				break;
+			default:
+				/* do nothing */
+				break;
+			}
+		}
+	}
+
+	switch (next) {
+	case DWC3_LINK_STATE_U1:
+		if (dwc->speed == USB_SPEED_SUPER)
+			dwc3_suspend_gadget(dwc);
+		break;
+	case DWC3_LINK_STATE_U2:
+	case DWC3_LINK_STATE_U3:
+		dwc3_suspend_gadget(dwc);
+		break;
+	case DWC3_LINK_STATE_RESUME:
+		dwc3_resume_gadget(dwc);
+		break;
+	default:
+		/* do nothing */
+		break;
+	}
+
+	dwc->link_state = next;
+}
+
+static void dwc3_gadget_suspend_interrupt(struct dwc3 *dwc,
+					  unsigned int evtinfo)
+{
+	enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK;
+
+	if (!dwc->suspended && next == DWC3_LINK_STATE_U3) {
+		dwc->suspended = true;
+		dwc3_suspend_gadget(dwc);
+	}
+
+	dwc->link_state = next;
+}
+
+static void dwc3_gadget_interrupt(struct dwc3 *dwc,
+		const struct dwc3_event_devt *event)
+{
+	switch (event->type) {
+	case DWC3_DEVICE_EVENT_DISCONNECT:
+		dwc3_gadget_disconnect_interrupt(dwc);
+		break;
+	case DWC3_DEVICE_EVENT_RESET:
+		dwc3_gadget_reset_interrupt(dwc);
+		break;
+	case DWC3_DEVICE_EVENT_CONNECT_DONE:
+		dwc3_gadget_conndone_interrupt(dwc);
+		break;
+	case DWC3_DEVICE_EVENT_WAKEUP:
+		dwc3_gadget_wakeup_interrupt(dwc);
+		break;
+	case DWC3_DEVICE_EVENT_HIBER_REQ:
+		dev_WARN_ONCE(dwc->dev, true, "unexpected hibernation event\n");
+		break;
+	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
+		dwc3_gadget_linksts_change_interrupt(dwc, event->event_info);
+		break;
+	case DWC3_DEVICE_EVENT_SUSPEND:
+		/* It changed to be suspend event for version 2.30a and above */
+		if (!DWC3_VER_IS_PRIOR(DWC3, 230A))
+			dwc3_gadget_suspend_interrupt(dwc, event->event_info);
+		break;
+	case DWC3_DEVICE_EVENT_SOF:
+	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
+	case DWC3_DEVICE_EVENT_CMD_CMPL:
+	case DWC3_DEVICE_EVENT_OVERFLOW:
+		break;
+	default:
+		dev_WARN(dwc->dev, "UNKNOWN IRQ %d\n", event->type);
+	}
+}
+
+static void dwc3_process_event_entry(struct dwc3 *dwc,
+		const union dwc3_event *event)
+{
+	trace_dwc3_event(event->raw, dwc);
+
+	if (!event->type.is_devspec)
+		dwc3_endpoint_interrupt(dwc, &event->depevt);
+	else if (event->type.type == DWC3_EVENT_TYPE_DEV)
+		dwc3_gadget_interrupt(dwc, &event->devt);
+	else
+		dev_err(dwc->dev, "UNKNOWN IRQ type %d\n", event->raw);
+}
+
+static irqreturn_t dwc3_process_event_buf(struct dwc3_event_buffer *evt)
+{
+	struct dwc3 *dwc = evt->dwc;
+	irqreturn_t ret = IRQ_NONE;
+	int left;
+
+	left = evt->count;
+
+	if (!(evt->flags & DWC3_EVENT_PENDING))
+		return IRQ_NONE;
+
+	while (left > 0) {
+		union dwc3_event event;
+
+		event.raw = *(u32 *) (evt->cache + evt->lpos);
+
+		dwc3_process_event_entry(dwc, &event);
+
+		/*
+		 * FIXME we wrap around correctly to the next entry as
+		 * almost all entries are 4 bytes in size. There is one
+		 * entry which has 12 bytes which is a regular entry
+		 * followed by 8 bytes data. ATM I don't know how
+		 * things are organized if we get next to the a
+		 * boundary so I worry about that once we try to handle
+		 * that.
+		 */
+		evt->lpos = (evt->lpos + 4) % evt->length;
+		left -= 4;
+	}
+
+	evt->count = 0;
+	ret = IRQ_HANDLED;
+
+	/* Unmask interrupt */
+	dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0),
+		    DWC3_GEVNTSIZ_SIZE(evt->length));
+
+	if (dwc->imod_interval) {
+		dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), DWC3_GEVNTCOUNT_EHB);
+		dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), dwc->imod_interval);
+	}
+
+	/* Keep the clearing of DWC3_EVENT_PENDING at the end */
+	evt->flags &= ~DWC3_EVENT_PENDING;
+
+	return ret;
+}
+
+static irqreturn_t dwc3_thread_interrupt(int irq, void *_evt)
+{
+	struct dwc3_event_buffer *evt = _evt;
+	struct dwc3 *dwc = evt->dwc;
+	unsigned long flags;
+	irqreturn_t ret = IRQ_NONE;
+
+	local_bh_disable();
+	spin_lock_irqsave(&dwc->lock, flags);
+	ret = dwc3_process_event_buf(evt);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+	local_bh_enable();
+
+	return ret;
+}
+
+static irqreturn_t dwc3_check_event_buf(struct dwc3_event_buffer *evt)
+{
+	struct dwc3 *dwc = evt->dwc;
+	u32 amount;
+	u32 count;
+
+	if (pm_runtime_suspended(dwc->dev)) {
+		dwc->pending_events = true;
+		/*
+		 * Trigger runtime resume. The get() function will be balanced
+		 * after processing the pending events in dwc3_process_pending
+		 * events().
+		 */
+		pm_runtime_get(dwc->dev);
+		disable_irq_nosync(dwc->irq_gadget);
+		return IRQ_HANDLED;
+	}
+
+	/*
+	 * With PCIe legacy interrupt, test shows that top-half irq handler can
+	 * be called again after HW interrupt deassertion. Check if bottom-half
+	 * irq event handler completes before caching new event to prevent
+	 * losing events.
+	 */
+	if (evt->flags & DWC3_EVENT_PENDING)
+		return IRQ_HANDLED;
+
+	count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
+	count &= DWC3_GEVNTCOUNT_MASK;
+	if (!count)
+		return IRQ_NONE;
+
+	evt->count = count;
+	evt->flags |= DWC3_EVENT_PENDING;
+
+	/* Mask interrupt */
+	dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0),
+		    DWC3_GEVNTSIZ_INTMASK | DWC3_GEVNTSIZ_SIZE(evt->length));
+
+	amount = min(count, evt->length - evt->lpos);
+	memcpy(evt->cache + evt->lpos, evt->buf + evt->lpos, amount);
+
+	if (amount < count)
+		memcpy(evt->cache, evt->buf, count - amount);
+
+	dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), count);
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t dwc3_interrupt(int irq, void *_evt)
+{
+	struct dwc3_event_buffer	*evt = _evt;
+
+	return dwc3_check_event_buf(evt);
+}
+
+static int dwc3_gadget_get_irq(struct dwc3 *dwc)
+{
+	struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
+	int irq;
+
+	irq = platform_get_irq_byname_optional(dwc3_pdev, "peripheral");
+	if (irq > 0)
+		goto out;
+
+	if (irq == -EPROBE_DEFER)
+		goto out;
+
+	irq = platform_get_irq_byname_optional(dwc3_pdev, "dwc_usb3");
+	if (irq > 0)
+		goto out;
+
+	if (irq == -EPROBE_DEFER)
+		goto out;
+
+	irq = platform_get_irq(dwc3_pdev, 0);
+	if (irq > 0)
+		goto out;
+
+	if (!irq)
+		irq = -EINVAL;
+
+out:
+	return irq;
+}
+
+static void dwc_gadget_release(struct device *dev)
+{
+	struct usb_gadget *gadget = container_of(dev, struct usb_gadget, dev);
+
+	kfree(gadget);
+}
+
+/**
+ * dwc3_gadget_init - initializes gadget related registers
+ * @dwc: pointer to our controller context structure
+ *
+ * Returns 0 on success otherwise negative errno.
+ */
+int dwc3_gadget_init(struct dwc3 *dwc)
+{
+	int ret;
+	int irq;
+	struct device *dev;
+
+	irq = dwc3_gadget_get_irq(dwc);
+	if (irq < 0) {
+		ret = irq;
+		goto err0;
+	}
+
+	dwc->irq_gadget = irq;
+
+	dwc->ep0_trb = dma_alloc_coherent(dwc->sysdev,
+					  sizeof(*dwc->ep0_trb) * 2,
+					  &dwc->ep0_trb_addr, GFP_KERNEL);
+	if (!dwc->ep0_trb) {
+		dev_err(dwc->dev, "failed to allocate ep0 trb\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	dwc->setup_buf = kzalloc(DWC3_EP0_SETUP_SIZE, GFP_KERNEL);
+	if (!dwc->setup_buf) {
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	dwc->bounce = dma_alloc_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE,
+			&dwc->bounce_addr, GFP_KERNEL);
+	if (!dwc->bounce) {
+		ret = -ENOMEM;
+		goto err2;
+	}
+
+	init_completion(&dwc->ep0_in_setup);
+	dwc->gadget = kzalloc(sizeof(struct usb_gadget), GFP_KERNEL);
+	if (!dwc->gadget) {
+		ret = -ENOMEM;
+		goto err3;
+	}
+
+
+	usb_initialize_gadget(dwc->dev, dwc->gadget, dwc_gadget_release);
+	dev				= &dwc->gadget->dev;
+	dev->platform_data		= dwc;
+	dwc->gadget->ops		= &dwc3_gadget_ops;
+	dwc->gadget->speed		= USB_SPEED_UNKNOWN;
+	dwc->gadget->ssp_rate		= USB_SSP_GEN_UNKNOWN;
+	dwc->gadget->sg_supported	= true;
+	dwc->gadget->name		= "dwc3-gadget";
+	dwc->gadget->lpm_capable	= !dwc->usb2_gadget_lpm_disable;
+
+	/*
+	 * FIXME We might be setting max_speed to <SUPER, however versions
+	 * <2.20a of dwc3 have an issue with metastability (documented
+	 * elsewhere in this driver) which tells us we can't set max speed to
+	 * anything lower than SUPER.
+	 *
+	 * Because gadget.max_speed is only used by composite.c and function
+	 * drivers (i.e. it won't go into dwc3's registers) we are allowing this
+	 * to happen so we avoid sending SuperSpeed Capability descriptor
+	 * together with our BOS descriptor as that could confuse host into
+	 * thinking we can handle super speed.
+	 *
+	 * Note that, in fact, we won't even support GetBOS requests when speed
+	 * is less than super speed because we don't have means, yet, to tell
+	 * composite.c that we are USB 2.0 + LPM ECN.
+	 */
+	if (DWC3_VER_IS_PRIOR(DWC3, 220A) &&
+	    !dwc->dis_metastability_quirk)
+		dev_info(dwc->dev, "changing max_speed on rev %08x\n",
+				dwc->revision);
+
+	dwc->gadget->max_speed		= dwc->maximum_speed;
+	dwc->gadget->max_ssp_rate	= dwc->max_ssp_rate;
+
+	/*
+	 * REVISIT: Here we should clear all pending IRQs to be
+	 * sure we're starting from a well known location.
+	 */
+
+	ret = dwc3_gadget_init_endpoints(dwc, dwc->num_eps);
+	if (ret)
+		goto err4;
+
+	ret = usb_add_gadget(dwc->gadget);
+	if (ret) {
+		dev_err(dwc->dev, "failed to add gadget\n");
+		goto err5;
+	}
+
+	if (DWC3_IP_IS(DWC32) && dwc->maximum_speed == USB_SPEED_SUPER_PLUS)
+		dwc3_gadget_set_ssp_rate(dwc->gadget, dwc->max_ssp_rate);
+	else
+		dwc3_gadget_set_speed(dwc->gadget, dwc->maximum_speed);
+
+	return 0;
+
+err5:
+	dwc3_gadget_free_endpoints(dwc);
+err4:
+	usb_put_gadget(dwc->gadget);
+	dwc->gadget = NULL;
+err3:
+	dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
+			dwc->bounce_addr);
+
+err2:
+	kfree(dwc->setup_buf);
+
+err1:
+	dma_free_coherent(dwc->sysdev, sizeof(*dwc->ep0_trb) * 2,
+			dwc->ep0_trb, dwc->ep0_trb_addr);
+
+err0:
+	return ret;
+}
+
+/* -------------------------------------------------------------------------- */
+
+void dwc3_gadget_exit(struct dwc3 *dwc)
+{
+	if (!dwc->gadget)
+		return;
+
+	usb_del_gadget(dwc->gadget);
+	dwc3_gadget_free_endpoints(dwc);
+	usb_put_gadget(dwc->gadget);
+	dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
+			  dwc->bounce_addr);
+	kfree(dwc->setup_buf);
+	dma_free_coherent(dwc->sysdev, sizeof(*dwc->ep0_trb) * 2,
+			  dwc->ep0_trb, dwc->ep0_trb_addr);
+}
+
+int dwc3_gadget_suspend(struct dwc3 *dwc)
+{
+	unsigned long flags;
+	int ret;
+
+	if (!dwc->gadget_driver)
+		return 0;
+
+	ret = dwc3_gadget_soft_disconnect(dwc);
+	if (ret)
+		goto err;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc3_disconnect_gadget(dwc);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
+
+err:
+	/*
+	 * Attempt to reset the controller's state. Likely no
+	 * communication can be established until the host
+	 * performs a port reset.
+	 */
+	if (dwc->softconnect)
+		dwc3_gadget_soft_connect(dwc);
+
+	return ret;
+}
+
+int dwc3_gadget_resume(struct dwc3 *dwc)
+{
+	if (!dwc->gadget_driver || !dwc->softconnect)
+		return 0;
+
+	return dwc3_gadget_soft_connect(dwc);
+}
+
+void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
+{
+	if (dwc->pending_events) {
+		dwc3_interrupt(dwc->irq_gadget, dwc->ev_buf);
+		dwc3_thread_interrupt(dwc->irq_gadget, dwc->ev_buf);
+		pm_runtime_put(dwc->dev);
+		dwc->pending_events = false;
+		enable_irq(dwc->irq_gadget);
+	}
+}
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
new file mode 100644
index 000000000..55a56cf67
--- /dev/null
+++ b/drivers/usb/dwc3/gadget.h
@@ -0,0 +1,152 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * gadget.h - DesignWare USB3 DRD Gadget Header
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ */
+
+#ifndef __DRIVERS_USB_DWC3_GADGET_H
+#define __DRIVERS_USB_DWC3_GADGET_H
+
+#include <linux/list.h>
+#include <linux/usb/gadget.h>
+#include "io.h"
+
+struct dwc3;
+#define to_dwc3_ep(ep)		(container_of(ep, struct dwc3_ep, endpoint))
+#define gadget_to_dwc(g)	(dev_get_platdata(&g->dev))
+
+/* DEPCFG parameter 1 */
+#define DWC3_DEPCFG_INT_NUM(n)		(((n) & 0x1f) << 0)
+#define DWC3_DEPCFG_XFER_COMPLETE_EN	BIT(8)
+#define DWC3_DEPCFG_XFER_IN_PROGRESS_EN	BIT(9)
+#define DWC3_DEPCFG_XFER_NOT_READY_EN	BIT(10)
+#define DWC3_DEPCFG_FIFO_ERROR_EN	BIT(11)
+#define DWC3_DEPCFG_STREAM_EVENT_EN	BIT(13)
+#define DWC3_DEPCFG_BINTERVAL_M1(n)	(((n) & 0xff) << 16)
+#define DWC3_DEPCFG_STREAM_CAPABLE	BIT(24)
+#define DWC3_DEPCFG_EP_NUMBER(n)	(((n) & 0x1f) << 25)
+#define DWC3_DEPCFG_BULK_BASED		BIT(30)
+#define DWC3_DEPCFG_FIFO_BASED		BIT(31)
+
+/* DEPCFG parameter 0 */
+#define DWC3_DEPCFG_EP_TYPE(n)		(((n) & 0x3) << 1)
+#define DWC3_DEPCFG_MAX_PACKET_SIZE(n)	(((n) & 0x7ff) << 3)
+#define DWC3_DEPCFG_FIFO_NUMBER(n)	(((n) & 0x1f) << 17)
+#define DWC3_DEPCFG_BURST_SIZE(n)	(((n) & 0xf) << 22)
+#define DWC3_DEPCFG_DATA_SEQ_NUM(n)	((n) << 26)
+/* This applies for core versions earlier than 1.94a */
+#define DWC3_DEPCFG_IGN_SEQ_NUM		BIT(31)
+/* These apply for core versions 1.94a and later */
+#define DWC3_DEPCFG_ACTION_INIT		(0 << 30)
+#define DWC3_DEPCFG_ACTION_RESTORE	BIT(30)
+#define DWC3_DEPCFG_ACTION_MODIFY	(2 << 30)
+
+/* DEPXFERCFG parameter 0 */
+#define DWC3_DEPXFERCFG_NUM_XFER_RES(n)	((n) & 0xffff)
+
+/* U1 Device exit Latency */
+#define DWC3_DEFAULT_U1_DEV_EXIT_LAT	0x0A	/* Less then 10 microsec */
+
+/* U2 Device exit Latency */
+#define DWC3_DEFAULT_U2_DEV_EXIT_LAT	0x1FF	/* Less then 511 microsec */
+
+/* Frame/Microframe Number Mask */
+#define DWC3_FRNUMBER_MASK		0x3fff
+/* -------------------------------------------------------------------------- */
+
+#define to_dwc3_request(r)	(container_of(r, struct dwc3_request, request))
+
+/**
+ * next_request - gets the next request on the given list
+ * @list: the request list to operate on
+ *
+ * Caller should take care of locking. This function return %NULL or the first
+ * request available on @list.
+ */
+static inline struct dwc3_request *next_request(struct list_head *list)
+{
+	return list_first_entry_or_null(list, struct dwc3_request, list);
+}
+
+/**
+ * dwc3_gadget_move_started_request - move @req to the started_list
+ * @req: the request to be moved
+ *
+ * Caller should take care of locking. This function will move @req from its
+ * current list to the endpoint's started_list.
+ */
+static inline void dwc3_gadget_move_started_request(struct dwc3_request *req)
+{
+	struct dwc3_ep		*dep = req->dep;
+
+	req->status = DWC3_REQUEST_STATUS_STARTED;
+	list_move_tail(&req->list, &dep->started_list);
+}
+
+/**
+ * dwc3_gadget_move_cancelled_request - move @req to the cancelled_list
+ * @req: the request to be moved
+ * @reason: cancelled reason for the dwc3 request
+ *
+ * Caller should take care of locking. This function will move @req from its
+ * current list to the endpoint's cancelled_list.
+ */
+static inline void dwc3_gadget_move_cancelled_request(struct dwc3_request *req,
+		unsigned int reason)
+{
+	struct dwc3_ep		*dep = req->dep;
+
+	req->status = reason;
+	list_move_tail(&req->list, &dep->cancelled_list);
+}
+
+void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
+		int status);
+
+void dwc3_ep0_interrupt(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event);
+void dwc3_ep0_out_start(struct dwc3 *dwc);
+void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep);
+void dwc3_ep0_stall_and_restart(struct dwc3 *dwc);
+int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
+int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
+int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
+		gfp_t gfp_flags);
+int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol);
+void dwc3_ep0_send_delayed_status(struct dwc3 *dwc);
+void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool interrupt);
+
+/**
+ * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
+ * @dep: dwc3 endpoint
+ *
+ * Caller should take care of locking. Returns the transfer resource
+ * index for a given endpoint.
+ */
+static inline void dwc3_gadget_ep_get_transfer_index(struct dwc3_ep *dep)
+{
+	u32			res_id;
+
+	res_id = dwc3_readl(dep->regs, DWC3_DEPCMD);
+	dep->resource_index = DWC3_DEPCMD_GET_RSC_IDX(res_id);
+}
+
+/**
+ * dwc3_gadget_dctl_write_safe - write to DCTL safe from link state change
+ * @dwc: pointer to our context structure
+ * @value: value to write to DCTL
+ *
+ * Use this function when doing read-modify-write to DCTL. It will not
+ * send link state change request.
+ */
+static inline void dwc3_gadget_dctl_write_safe(struct dwc3 *dwc, u32 value)
+{
+	value &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
+	dwc3_writel(dwc->regs, DWC3_DCTL, value);
+}
+
+#endif /* __DRIVERS_USB_DWC3_GADGET_H */
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
new file mode 100644
index 000000000..f6f13e7f1
--- /dev/null
+++ b/drivers/usb/dwc3/host.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * host.c - DesignWare USB3 DRD Controller Host Glue
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ */
+
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "core.h"
+
+static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
+					int irq, char *name)
+{
+	struct platform_device *pdev = to_platform_device(dwc->dev);
+	struct device_node *np = dev_of_node(&pdev->dev);
+
+	dwc->xhci_resources[1].start = irq;
+	dwc->xhci_resources[1].end = irq;
+	dwc->xhci_resources[1].flags = IORESOURCE_IRQ | irq_get_trigger_type(irq);
+	if (!name && np)
+		dwc->xhci_resources[1].name = of_node_full_name(pdev->dev.of_node);
+	else
+		dwc->xhci_resources[1].name = name;
+}
+
+static int dwc3_host_get_irq(struct dwc3 *dwc)
+{
+	struct platform_device	*dwc3_pdev = to_platform_device(dwc->dev);
+	int irq;
+
+	irq = platform_get_irq_byname_optional(dwc3_pdev, "host");
+	if (irq > 0) {
+		dwc3_host_fill_xhci_irq_res(dwc, irq, "host");
+		goto out;
+	}
+
+	if (irq == -EPROBE_DEFER)
+		goto out;
+
+	irq = platform_get_irq_byname_optional(dwc3_pdev, "dwc_usb3");
+	if (irq > 0) {
+		dwc3_host_fill_xhci_irq_res(dwc, irq, "dwc_usb3");
+		goto out;
+	}
+
+	if (irq == -EPROBE_DEFER)
+		goto out;
+
+	irq = platform_get_irq(dwc3_pdev, 0);
+	if (irq > 0) {
+		dwc3_host_fill_xhci_irq_res(dwc, irq, NULL);
+		goto out;
+	}
+
+	if (!irq)
+		irq = -EINVAL;
+
+out:
+	return irq;
+}
+
+int dwc3_host_init(struct dwc3 *dwc)
+{
+	struct property_entry	props[4];
+	struct platform_device	*xhci;
+	int			ret, irq;
+	int			prop_idx = 0;
+
+	irq = dwc3_host_get_irq(dwc);
+	if (irq < 0)
+		return irq;
+
+	xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
+	if (!xhci) {
+		dev_err(dwc->dev, "couldn't allocate xHCI device\n");
+		return -ENOMEM;
+	}
+
+	xhci->dev.parent	= dwc->dev;
+
+	dwc->xhci = xhci;
+
+	ret = platform_device_add_resources(xhci, dwc->xhci_resources,
+						DWC3_XHCI_RESOURCES_NUM);
+	if (ret) {
+		dev_err(dwc->dev, "couldn't add resources to xHCI device\n");
+		goto err;
+	}
+
+	memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
+
+	if (dwc->usb3_lpm_capable)
+		props[prop_idx++] = PROPERTY_ENTRY_BOOL("usb3-lpm-capable");
+
+	if (dwc->usb2_lpm_disable)
+		props[prop_idx++] = PROPERTY_ENTRY_BOOL("usb2-lpm-disable");
+
+	/**
+	 * WORKAROUND: dwc3 revisions <=3.00a have a limitation
+	 * where Port Disable command doesn't work.
+	 *
+	 * The suggested workaround is that we avoid Port Disable
+	 * completely.
+	 *
+	 * This following flag tells XHCI to do just that.
+	 */
+	if (DWC3_VER_IS_WITHIN(DWC3, ANY, 300A))
+		props[prop_idx++] = PROPERTY_ENTRY_BOOL("quirk-broken-port-ped");
+
+	if (prop_idx) {
+		ret = device_create_managed_software_node(&xhci->dev, props, NULL);
+		if (ret) {
+			dev_err(dwc->dev, "failed to add properties to xHCI\n");
+			goto err;
+		}
+	}
+
+	ret = platform_device_add(xhci);
+	if (ret) {
+		dev_err(dwc->dev, "failed to register xHCI device\n");
+		goto err;
+	}
+
+	return 0;
+err:
+	platform_device_put(xhci);
+	return ret;
+}
+
+void dwc3_host_exit(struct dwc3 *dwc)
+{
+	platform_device_unregister(dwc->xhci);
+	dwc->xhci = NULL;
+}
diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h
new file mode 100644
index 000000000..1e96ea339
--- /dev/null
+++ b/drivers/usb/dwc3/io.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * io.h - DesignWare USB3 DRD IO Header
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ */
+
+#ifndef __DRIVERS_USB_DWC3_IO_H
+#define __DRIVERS_USB_DWC3_IO_H
+
+#include <linux/io.h>
+#include "trace.h"
+#include "debug.h"
+#include "core.h"
+
+static inline u32 dwc3_readl(void __iomem *base, u32 offset)
+{
+	u32 value;
+
+	/*
+	 * We requested the mem region starting from the Globals address
+	 * space, see dwc3_probe in core.c.
+	 * However, the offsets are given starting from xHCI address space.
+	 */
+	value = readl(base + offset - DWC3_GLOBALS_REGS_START);
+
+	/*
+	 * When tracing we want to make it easy to find the correct address on
+	 * documentation, so we revert it back to the proper addresses, the
+	 * same way they are described on SNPS documentation
+	 */
+	trace_dwc3_readl(base - DWC3_GLOBALS_REGS_START, offset, value);
+
+	return value;
+}
+
+static inline void dwc3_writel(void __iomem *base, u32 offset, u32 value)
+{
+	/*
+	 * We requested the mem region starting from the Globals address
+	 * space, see dwc3_probe in core.c.
+	 * However, the offsets are given starting from xHCI address space.
+	 */
+	writel(value, base + offset - DWC3_GLOBALS_REGS_START);
+
+	/*
+	 * When tracing we want to make it easy to find the correct address on
+	 * documentation, so we revert it back to the proper addresses, the
+	 * same way they are described on SNPS documentation
+	 */
+	trace_dwc3_writel(base - DWC3_GLOBALS_REGS_START, offset, value);
+}
+
+#endif /* __DRIVERS_USB_DWC3_IO_H */
diff --git a/drivers/usb/dwc3/trace.c b/drivers/usb/dwc3/trace.c
new file mode 100644
index 000000000..088995885
--- /dev/null
+++ b/drivers/usb/dwc3/trace.c
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * trace.c - DesignWare USB3 DRD Controller Trace Support
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ */
+
+#define CREATE_TRACE_POINTS
+#include "trace.h"
diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h
new file mode 100644
index 000000000..1975aec8d
--- /dev/null
+++ b/drivers/usb/dwc3/trace.h
@@ -0,0 +1,350 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * trace.h - DesignWare USB3 DRD Controller Trace Support
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM dwc3
+
+#if !defined(__DWC3_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define __DWC3_TRACE_H
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+#include <asm/byteorder.h>
+#include "core.h"
+#include "debug.h"
+
+DECLARE_EVENT_CLASS(dwc3_log_io,
+	TP_PROTO(void *base, u32 offset, u32 value),
+	TP_ARGS(base, offset, value),
+	TP_STRUCT__entry(
+		__field(void *, base)
+		__field(u32, offset)
+		__field(u32, value)
+	),
+	TP_fast_assign(
+		__entry->base = base;
+		__entry->offset = offset;
+		__entry->value = value;
+	),
+	TP_printk("addr %p offset %04x value %08x",
+		__entry->base + __entry->offset,
+		__entry->offset,
+		__entry->value)
+);
+
+DEFINE_EVENT(dwc3_log_io, dwc3_readl,
+	TP_PROTO(void __iomem *base, u32 offset, u32 value),
+	TP_ARGS(base, offset, value)
+);
+
+DEFINE_EVENT(dwc3_log_io, dwc3_writel,
+	TP_PROTO(void __iomem *base, u32 offset, u32 value),
+	TP_ARGS(base, offset, value)
+);
+
+DECLARE_EVENT_CLASS(dwc3_log_event,
+	TP_PROTO(u32 event, struct dwc3 *dwc),
+	TP_ARGS(event, dwc),
+	TP_STRUCT__entry(
+		__field(u32, event)
+		__field(u32, ep0state)
+		__dynamic_array(char, str, DWC3_MSG_MAX)
+	),
+	TP_fast_assign(
+		__entry->event = event;
+		__entry->ep0state = dwc->ep0state;
+	),
+	TP_printk("event (%08x): %s", __entry->event,
+			dwc3_decode_event(__get_str(str), DWC3_MSG_MAX,
+					__entry->event, __entry->ep0state))
+);
+
+DEFINE_EVENT(dwc3_log_event, dwc3_event,
+	TP_PROTO(u32 event, struct dwc3 *dwc),
+	TP_ARGS(event, dwc)
+);
+
+DECLARE_EVENT_CLASS(dwc3_log_ctrl,
+	TP_PROTO(struct usb_ctrlrequest *ctrl),
+	TP_ARGS(ctrl),
+	TP_STRUCT__entry(
+		__field(__u8, bRequestType)
+		__field(__u8, bRequest)
+		__field(__u16, wValue)
+		__field(__u16, wIndex)
+		__field(__u16, wLength)
+		__dynamic_array(char, str, DWC3_MSG_MAX)
+	),
+	TP_fast_assign(
+		__entry->bRequestType = ctrl->bRequestType;
+		__entry->bRequest = ctrl->bRequest;
+		__entry->wValue = le16_to_cpu(ctrl->wValue);
+		__entry->wIndex = le16_to_cpu(ctrl->wIndex);
+		__entry->wLength = le16_to_cpu(ctrl->wLength);
+	),
+	TP_printk("%s", usb_decode_ctrl(__get_str(str), DWC3_MSG_MAX,
+					__entry->bRequestType,
+					__entry->bRequest, __entry->wValue,
+					__entry->wIndex, __entry->wLength)
+	)
+);
+
+DEFINE_EVENT(dwc3_log_ctrl, dwc3_ctrl_req,
+	TP_PROTO(struct usb_ctrlrequest *ctrl),
+	TP_ARGS(ctrl)
+);
+
+DECLARE_EVENT_CLASS(dwc3_log_request,
+	TP_PROTO(struct dwc3_request *req),
+	TP_ARGS(req),
+	TP_STRUCT__entry(
+		__string(name, req->dep->name)
+		__field(struct dwc3_request *, req)
+		__field(unsigned int, actual)
+		__field(unsigned int, length)
+		__field(int, status)
+		__field(int, zero)
+		__field(int, short_not_ok)
+		__field(int, no_interrupt)
+	),
+	TP_fast_assign(
+		__assign_str(name, req->dep->name);
+		__entry->req = req;
+		__entry->actual = req->request.actual;
+		__entry->length = req->request.length;
+		__entry->status = req->request.status;
+		__entry->zero = req->request.zero;
+		__entry->short_not_ok = req->request.short_not_ok;
+		__entry->no_interrupt = req->request.no_interrupt;
+	),
+	TP_printk("%s: req %p length %u/%u %s%s%s ==> %d",
+		__get_str(name), __entry->req, __entry->actual, __entry->length,
+		__entry->zero ? "Z" : "z",
+		__entry->short_not_ok ? "S" : "s",
+		__entry->no_interrupt ? "i" : "I",
+		__entry->status
+	)
+);
+
+DEFINE_EVENT(dwc3_log_request, dwc3_alloc_request,
+	TP_PROTO(struct dwc3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(dwc3_log_request, dwc3_free_request,
+	TP_PROTO(struct dwc3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(dwc3_log_request, dwc3_ep_queue,
+	TP_PROTO(struct dwc3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(dwc3_log_request, dwc3_ep_dequeue,
+	TP_PROTO(struct dwc3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(dwc3_log_request, dwc3_gadget_giveback,
+	TP_PROTO(struct dwc3_request *req),
+	TP_ARGS(req)
+);
+
+DECLARE_EVENT_CLASS(dwc3_log_generic_cmd,
+	TP_PROTO(unsigned int cmd, u32 param, int status),
+	TP_ARGS(cmd, param, status),
+	TP_STRUCT__entry(
+		__field(unsigned int, cmd)
+		__field(u32, param)
+		__field(int, status)
+	),
+	TP_fast_assign(
+		__entry->cmd = cmd;
+		__entry->param = param;
+		__entry->status = status;
+	),
+	TP_printk("cmd '%s' [%x] param %08x --> status: %s",
+		dwc3_gadget_generic_cmd_string(__entry->cmd),
+		__entry->cmd, __entry->param,
+		dwc3_gadget_generic_cmd_status_string(__entry->status)
+	)
+);
+
+DEFINE_EVENT(dwc3_log_generic_cmd, dwc3_gadget_generic_cmd,
+	TP_PROTO(unsigned int cmd, u32 param, int status),
+	TP_ARGS(cmd, param, status)
+);
+
+DECLARE_EVENT_CLASS(dwc3_log_gadget_ep_cmd,
+	TP_PROTO(struct dwc3_ep *dep, unsigned int cmd,
+		struct dwc3_gadget_ep_cmd_params *params, int cmd_status),
+	TP_ARGS(dep, cmd, params, cmd_status),
+	TP_STRUCT__entry(
+		__string(name, dep->name)
+		__field(unsigned int, cmd)
+		__field(u32, param0)
+		__field(u32, param1)
+		__field(u32, param2)
+		__field(int, cmd_status)
+	),
+	TP_fast_assign(
+		__assign_str(name, dep->name);
+		__entry->cmd = cmd;
+		__entry->param0 = params->param0;
+		__entry->param1 = params->param1;
+		__entry->param2 = params->param2;
+		__entry->cmd_status = cmd_status;
+	),
+	TP_printk("%s: cmd '%s' [%x] params %08x %08x %08x --> status: %s",
+		__get_str(name), dwc3_gadget_ep_cmd_string(__entry->cmd),
+		__entry->cmd, __entry->param0,
+		__entry->param1, __entry->param2,
+		dwc3_ep_cmd_status_string(__entry->cmd_status)
+	)
+);
+
+DEFINE_EVENT(dwc3_log_gadget_ep_cmd, dwc3_gadget_ep_cmd,
+	TP_PROTO(struct dwc3_ep *dep, unsigned int cmd,
+		struct dwc3_gadget_ep_cmd_params *params, int cmd_status),
+	TP_ARGS(dep, cmd, params, cmd_status)
+);
+
+DECLARE_EVENT_CLASS(dwc3_log_trb,
+	TP_PROTO(struct dwc3_ep *dep, struct dwc3_trb *trb),
+	TP_ARGS(dep, trb),
+	TP_STRUCT__entry(
+		__string(name, dep->name)
+		__field(struct dwc3_trb *, trb)
+		__field(u32, bpl)
+		__field(u32, bph)
+		__field(u32, size)
+		__field(u32, ctrl)
+		__field(u32, type)
+		__field(u32, enqueue)
+		__field(u32, dequeue)
+	),
+	TP_fast_assign(
+		__assign_str(name, dep->name);
+		__entry->trb = trb;
+		__entry->bpl = trb->bpl;
+		__entry->bph = trb->bph;
+		__entry->size = trb->size;
+		__entry->ctrl = trb->ctrl;
+		__entry->type = usb_endpoint_type(dep->endpoint.desc);
+		__entry->enqueue = dep->trb_enqueue;
+		__entry->dequeue = dep->trb_dequeue;
+	),
+	TP_printk("%s: trb %p (E%d:D%d) buf %08x%08x size %s%d ctrl %08x sofn %08x (%c%c%c%c:%c%c:%s)",
+		__get_str(name), __entry->trb, __entry->enqueue,
+		__entry->dequeue, __entry->bph, __entry->bpl,
+		({char *s;
+		int pcm = ((__entry->size >> 24) & 3) + 1;
+
+		switch (__entry->type) {
+		case USB_ENDPOINT_XFER_INT:
+		case USB_ENDPOINT_XFER_ISOC:
+			switch (pcm) {
+			case 1:
+				s = "1x ";
+				break;
+			case 2:
+				s = "2x ";
+				break;
+			case 3:
+			default:
+				s = "3x ";
+				break;
+			}
+			break;
+		default:
+			s = "";
+		} s; }),
+		DWC3_TRB_SIZE_LENGTH(__entry->size), __entry->ctrl,
+		DWC3_TRB_CTRL_GET_SID_SOFN(__entry->ctrl),
+		__entry->ctrl & DWC3_TRB_CTRL_HWO ? 'H' : 'h',
+		__entry->ctrl & DWC3_TRB_CTRL_LST ? 'L' : 'l',
+		__entry->ctrl & DWC3_TRB_CTRL_CHN ? 'C' : 'c',
+		__entry->ctrl & DWC3_TRB_CTRL_CSP ? 'S' : 's',
+		__entry->ctrl & DWC3_TRB_CTRL_ISP_IMI ? 'S' : 's',
+		__entry->ctrl & DWC3_TRB_CTRL_IOC ? 'C' : 'c',
+		  dwc3_trb_type_string(DWC3_TRBCTL_TYPE(__entry->ctrl))
+	)
+);
+
+DEFINE_EVENT(dwc3_log_trb, dwc3_prepare_trb,
+	TP_PROTO(struct dwc3_ep *dep, struct dwc3_trb *trb),
+	TP_ARGS(dep, trb)
+);
+
+DEFINE_EVENT(dwc3_log_trb, dwc3_complete_trb,
+	TP_PROTO(struct dwc3_ep *dep, struct dwc3_trb *trb),
+	TP_ARGS(dep, trb)
+);
+
+DECLARE_EVENT_CLASS(dwc3_log_ep,
+	TP_PROTO(struct dwc3_ep *dep),
+	TP_ARGS(dep),
+	TP_STRUCT__entry(
+		__string(name, dep->name)
+		__field(unsigned int, maxpacket)
+		__field(unsigned int, maxpacket_limit)
+		__field(unsigned int, max_streams)
+		__field(unsigned int, maxburst)
+		__field(unsigned int, flags)
+		__field(unsigned int, direction)
+		__field(u8, trb_enqueue)
+		__field(u8, trb_dequeue)
+	),
+	TP_fast_assign(
+		__assign_str(name, dep->name);
+		__entry->maxpacket = dep->endpoint.maxpacket;
+		__entry->maxpacket_limit = dep->endpoint.maxpacket_limit;
+		__entry->max_streams = dep->endpoint.max_streams;
+		__entry->maxburst = dep->endpoint.maxburst;
+		__entry->flags = dep->flags;
+		__entry->direction = dep->direction;
+		__entry->trb_enqueue = dep->trb_enqueue;
+		__entry->trb_dequeue = dep->trb_dequeue;
+	),
+	TP_printk("%s: mps %d/%d streams %d burst %d ring %d/%d flags %c:%c%c%c%c:%c",
+		__get_str(name), __entry->maxpacket,
+		__entry->maxpacket_limit, __entry->max_streams,
+		__entry->maxburst, __entry->trb_enqueue,
+		__entry->trb_dequeue,
+		__entry->flags & DWC3_EP_ENABLED ? 'E' : 'e',
+		__entry->flags & DWC3_EP_STALL ? 'S' : 's',
+		__entry->flags & DWC3_EP_WEDGE ? 'W' : 'w',
+		__entry->flags & DWC3_EP_TRANSFER_STARTED ? 'B' : 'b',
+		__entry->flags & DWC3_EP_PENDING_REQUEST ? 'P' : 'p',
+		__entry->direction ? '<' : '>'
+	)
+);
+
+DEFINE_EVENT(dwc3_log_ep, dwc3_gadget_ep_enable,
+	TP_PROTO(struct dwc3_ep *dep),
+	TP_ARGS(dep)
+);
+
+DEFINE_EVENT(dwc3_log_ep, dwc3_gadget_ep_disable,
+	TP_PROTO(struct dwc3_ep *dep),
+	TP_ARGS(dep)
+);
+
+#endif /* __DWC3_TRACE_H */
+
+/* this part has to be here */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c
new file mode 100644
index 000000000..f23f4c9a5
--- /dev/null
+++ b/drivers/usb/dwc3/ulpi.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ulpi.c - DesignWare USB3 Controller's ULPI PHY interface
+ *
+ * Copyright (C) 2015 Intel Corporation
+ *
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/time64.h>
+#include <linux/ulpi/regs.h>
+
+#include "core.h"
+#include "io.h"
+
+#define DWC3_ULPI_ADDR(a) \
+		((a >= ULPI_EXT_VENDOR_SPECIFIC) ? \
+		DWC3_GUSB2PHYACC_ADDR(ULPI_ACCESS_EXTENDED) | \
+		DWC3_GUSB2PHYACC_EXTEND_ADDR(a) : DWC3_GUSB2PHYACC_ADDR(a))
+
+#define DWC3_ULPI_BASE_DELAY	DIV_ROUND_UP(NSEC_PER_SEC, 60000000L)
+
+static int dwc3_ulpi_busyloop(struct dwc3 *dwc, u8 addr, bool read)
+{
+	unsigned long ns = 5L * DWC3_ULPI_BASE_DELAY;
+	unsigned int count = 10000;
+	u32 reg;
+
+	if (addr >= ULPI_EXT_VENDOR_SPECIFIC)
+		ns += DWC3_ULPI_BASE_DELAY;
+
+	if (read)
+		ns += DWC3_ULPI_BASE_DELAY;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+	if (reg & DWC3_GUSB2PHYCFG_SUSPHY)
+		usleep_range(1000, 1200);
+
+	while (count--) {
+		ndelay(ns);
+		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0));
+		if (reg & DWC3_GUSB2PHYACC_DONE)
+			return 0;
+		cpu_relax();
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int dwc3_ulpi_read(struct device *dev, u8 addr)
+{
+	struct dwc3 *dwc = dev_get_drvdata(dev);
+	u32 reg;
+	int ret;
+
+	reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr);
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);
+
+	ret = dwc3_ulpi_busyloop(dwc, addr, true);
+	if (ret)
+		return ret;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0));
+
+	return DWC3_GUSB2PHYACC_DATA(reg);
+}
+
+static int dwc3_ulpi_write(struct device *dev, u8 addr, u8 val)
+{
+	struct dwc3 *dwc = dev_get_drvdata(dev);
+	u32 reg;
+
+	reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr);
+	reg |= DWC3_GUSB2PHYACC_WRITE | val;
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);
+
+	return dwc3_ulpi_busyloop(dwc, addr, false);
+}
+
+static const struct ulpi_ops dwc3_ulpi_ops = {
+	.read = dwc3_ulpi_read,
+	.write = dwc3_ulpi_write,
+};
+
+int dwc3_ulpi_init(struct dwc3 *dwc)
+{
+	/* Register the interface */
+	dwc->ulpi = ulpi_register_interface(dwc->dev, &dwc3_ulpi_ops);
+	if (IS_ERR(dwc->ulpi)) {
+		dev_err(dwc->dev, "failed to register ULPI interface");
+		return PTR_ERR(dwc->ulpi);
+	}
+
+	return 0;
+}
+
+void dwc3_ulpi_exit(struct dwc3 *dwc)
+{
+	if (dwc->ulpi) {
+		ulpi_unregister_interface(dwc->ulpi);
+		dwc->ulpi = NULL;
+	}
+}
diff --git a/drivers/usb/early/Makefile b/drivers/usb/early/Makefile
new file mode 100644
index 000000000..7b77b49d3
--- /dev/null
+++ b/drivers/usb/early/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for early USB devices
+#
+
+obj-$(CONFIG_EARLY_PRINTK_DBGP) += ehci-dbgp.o
+obj-$(CONFIG_EARLY_PRINTK_USB_XDBC) += xhci-dbc.o
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
new file mode 100644
index 000000000..45b42d8f6
--- /dev/null
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -0,0 +1,1092 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Standalone EHCI usb debug driver
+ *
+ * Originally written by:
+ *  Eric W. Biederman" <ebiederm@xmission.com> and
+ *  Yinghai Lu <yhlu.kernel@gmail.com>
+ *
+ * Changes for early/late printk and HW errata:
+ *  Jason Wessel <jason.wessel@windriver.com>
+ *  Copyright (C) 2009 Wind River Systems, Inc.
+ *
+ */
+
+#include <linux/console.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/pci_regs.h>
+#include <linux/pci_ids.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/ehci_def.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+#include <linux/kgdb.h>
+#include <linux/kthread.h>
+#include <asm/io.h>
+#include <asm/pci-direct.h>
+#include <asm/fixmap.h>
+
+/* The code here is intended to talk directly to the EHCI debug port
+ * and does not require that you have any kind of USB host controller
+ * drivers or USB device drivers compiled into the kernel.
+ *
+ * If you make a change to anything in here, the following test cases
+ * need to pass where a USB debug device works in the following
+ * configurations.
+ *
+ * 1. boot args:  earlyprintk=dbgp
+ *     o kernel compiled with # CONFIG_USB_EHCI_HCD is not set
+ *     o kernel compiled with CONFIG_USB_EHCI_HCD=y
+ * 2. boot args: earlyprintk=dbgp,keep
+ *     o kernel compiled with # CONFIG_USB_EHCI_HCD is not set
+ *     o kernel compiled with CONFIG_USB_EHCI_HCD=y
+ * 3. boot args: earlyprintk=dbgp console=ttyUSB0
+ *     o kernel has CONFIG_USB_EHCI_HCD=y and
+ *       CONFIG_USB_SERIAL_DEBUG=y
+ * 4. boot args: earlyprintk=vga,dbgp
+ *     o kernel compiled with # CONFIG_USB_EHCI_HCD is not set
+ *     o kernel compiled with CONFIG_USB_EHCI_HCD=y
+ *
+ * For the 4th configuration you can turn on or off the DBGP_DEBUG
+ * such that you can debug the dbgp device's driver code.
+ */
+
+static int dbgp_phys_port = 1;
+
+static struct ehci_caps __iomem *ehci_caps;
+static struct ehci_regs __iomem *ehci_regs;
+static struct ehci_dbg_port __iomem *ehci_debug;
+static int dbgp_not_safe; /* Cannot use debug device during ehci reset */
+static unsigned int dbgp_endpoint_out;
+static unsigned int dbgp_endpoint_in;
+
+struct ehci_dev {
+	u32 bus;
+	u32 slot;
+	u32 func;
+};
+
+static struct ehci_dev ehci_dev;
+
+#define USB_DEBUG_DEVNUM 127
+
+#ifdef DBGP_DEBUG
+#define dbgp_printk printk
+static void dbgp_ehci_status(char *str)
+{
+	if (!ehci_debug)
+		return;
+	dbgp_printk("dbgp: %s\n", str);
+	dbgp_printk("  Debug control: %08x", readl(&ehci_debug->control));
+	dbgp_printk("  ehci cmd     : %08x", readl(&ehci_regs->command));
+	dbgp_printk("  ehci conf flg: %08x\n",
+		    readl(&ehci_regs->configured_flag));
+	dbgp_printk("  ehci status  : %08x", readl(&ehci_regs->status));
+	dbgp_printk("  ehci portsc  : %08x\n",
+		    readl(&ehci_regs->port_status[dbgp_phys_port - 1]));
+}
+#else
+static inline void dbgp_ehci_status(char *str) { }
+static inline void dbgp_printk(const char *fmt, ...) { }
+#endif
+
+static inline u32 dbgp_len_update(u32 x, u32 len)
+{
+	return (x & ~0x0f) | (len & 0x0f);
+}
+
+#ifdef CONFIG_KGDB
+static struct kgdb_io kgdbdbgp_io_ops;
+#define dbgp_kgdb_mode (dbg_io_ops == &kgdbdbgp_io_ops)
+#else
+#define dbgp_kgdb_mode (0)
+#endif
+
+/* Local version of HC_LENGTH macro as ehci struct is not available here */
+#define EARLY_HC_LENGTH(p)	(0x00ff & (p)) /* bits 7 : 0 */
+
+/*
+ * USB Packet IDs (PIDs)
+ */
+
+/* token */
+#define USB_PID_OUT		0xe1
+#define USB_PID_IN		0x69
+#define USB_PID_SOF		0xa5
+#define USB_PID_SETUP		0x2d
+/* handshake */
+#define USB_PID_ACK		0xd2
+#define USB_PID_NAK		0x5a
+#define USB_PID_STALL		0x1e
+#define USB_PID_NYET		0x96
+/* data */
+#define USB_PID_DATA0		0xc3
+#define USB_PID_DATA1		0x4b
+#define USB_PID_DATA2		0x87
+#define USB_PID_MDATA		0x0f
+/* Special */
+#define USB_PID_PREAMBLE	0x3c
+#define USB_PID_ERR		0x3c
+#define USB_PID_SPLIT		0x78
+#define USB_PID_PING		0xb4
+#define USB_PID_UNDEF_0		0xf0
+
+#define USB_PID_DATA_TOGGLE	0x88
+#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE)
+
+#define PCI_CAP_ID_EHCI_DEBUG	0xa
+
+#define HUB_ROOT_RESET_TIME	50	/* times are in msec */
+#define HUB_SHORT_RESET_TIME	10
+#define HUB_LONG_RESET_TIME	200
+#define HUB_RESET_TIMEOUT	500
+
+#define DBGP_MAX_PACKET		8
+#define DBGP_TIMEOUT		(250 * 1000)
+#define DBGP_LOOPS		1000
+
+static inline u32 dbgp_pid_write_update(u32 x, u32 tok)
+{
+	static int data0 = USB_PID_DATA1;
+	data0 ^= USB_PID_DATA_TOGGLE;
+	return (x & 0xffff0000) | (data0 << 8) | (tok & 0xff);
+}
+
+static inline u32 dbgp_pid_read_update(u32 x, u32 tok)
+{
+	return (x & 0xffff0000) | (USB_PID_DATA0 << 8) | (tok & 0xff);
+}
+
+static int dbgp_wait_until_complete(void)
+{
+	u32 ctrl;
+	int ret;
+
+	ret = readl_poll_timeout_atomic(&ehci_debug->control, ctrl,
+				(ctrl & DBGP_DONE), 1, DBGP_TIMEOUT);
+	if (ret)
+		return -DBGP_TIMEOUT;
+
+	/*
+	 * Now that we have observed the completed transaction,
+	 * clear the done bit.
+	 */
+	writel(ctrl | DBGP_DONE, &ehci_debug->control);
+	return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl);
+}
+
+static inline void dbgp_mdelay(int ms)
+{
+	int i;
+
+	while (ms--) {
+		for (i = 0; i < 1000; i++)
+			outb(0x1, 0x80);
+	}
+}
+
+static void dbgp_breath(void)
+{
+	/* Sleep to give the debug port a chance to breathe */
+}
+
+static int dbgp_wait_until_done(unsigned ctrl, int loop)
+{
+	u32 pids, lpid;
+	int ret;
+
+retry:
+	writel(ctrl | DBGP_GO, &ehci_debug->control);
+	ret = dbgp_wait_until_complete();
+	pids = readl(&ehci_debug->pids);
+	lpid = DBGP_PID_GET(pids);
+
+	if (ret < 0) {
+		/* A -DBGP_TIMEOUT failure here means the device has
+		 * failed, perhaps because it was unplugged, in which
+		 * case we do not want to hang the system so the dbgp
+		 * will be marked as unsafe to use.  EHCI reset is the
+		 * only way to recover if you unplug the dbgp device.
+		 */
+		if (ret == -DBGP_TIMEOUT && !dbgp_not_safe)
+			dbgp_not_safe = 1;
+		if (ret == -DBGP_ERR_BAD && --loop > 0)
+			goto retry;
+		return ret;
+	}
+
+	/*
+	 * If the port is getting full or it has dropped data
+	 * start pacing ourselves, not necessary but it's friendly.
+	 */
+	if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET))
+		dbgp_breath();
+
+	/* If I get a NACK reissue the transmission */
+	if (lpid == USB_PID_NAK) {
+		if (--loop > 0)
+			goto retry;
+	}
+
+	return ret;
+}
+
+static inline void dbgp_set_data(const void *buf, int size)
+{
+	const unsigned char *bytes = buf;
+	u32 lo, hi;
+	int i;
+
+	lo = hi = 0;
+	for (i = 0; i < 4 && i < size; i++)
+		lo |= bytes[i] << (8*i);
+	for (; i < 8 && i < size; i++)
+		hi |= bytes[i] << (8*(i - 4));
+	writel(lo, &ehci_debug->data03);
+	writel(hi, &ehci_debug->data47);
+}
+
+static inline void dbgp_get_data(void *buf, int size)
+{
+	unsigned char *bytes = buf;
+	u32 lo, hi;
+	int i;
+
+	lo = readl(&ehci_debug->data03);
+	hi = readl(&ehci_debug->data47);
+	for (i = 0; i < 4 && i < size; i++)
+		bytes[i] = (lo >> (8*i)) & 0xff;
+	for (; i < 8 && i < size; i++)
+		bytes[i] = (hi >> (8*(i - 4))) & 0xff;
+}
+
+static int dbgp_bulk_write(unsigned devnum, unsigned endpoint,
+			 const char *bytes, int size)
+{
+	int ret;
+	u32 addr;
+	u32 pids, ctrl;
+
+	if (size > DBGP_MAX_PACKET)
+		return -1;
+
+	addr = DBGP_EPADDR(devnum, endpoint);
+
+	pids = readl(&ehci_debug->pids);
+	pids = dbgp_pid_write_update(pids, USB_PID_OUT);
+
+	ctrl = readl(&ehci_debug->control);
+	ctrl = dbgp_len_update(ctrl, size);
+	ctrl |= DBGP_OUT;
+	ctrl |= DBGP_GO;
+
+	dbgp_set_data(bytes, size);
+	writel(addr, &ehci_debug->address);
+	writel(pids, &ehci_debug->pids);
+	ret = dbgp_wait_until_done(ctrl, DBGP_LOOPS);
+
+	return ret;
+}
+
+static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data,
+			  int size, int loops)
+{
+	u32 pids, addr, ctrl;
+	int ret;
+
+	if (size > DBGP_MAX_PACKET)
+		return -1;
+
+	addr = DBGP_EPADDR(devnum, endpoint);
+
+	pids = readl(&ehci_debug->pids);
+	pids = dbgp_pid_read_update(pids, USB_PID_IN);
+
+	ctrl = readl(&ehci_debug->control);
+	ctrl = dbgp_len_update(ctrl, size);
+	ctrl &= ~DBGP_OUT;
+	ctrl |= DBGP_GO;
+
+	writel(addr, &ehci_debug->address);
+	writel(pids, &ehci_debug->pids);
+	ret = dbgp_wait_until_done(ctrl, loops);
+	if (ret < 0)
+		return ret;
+
+	if (size > ret)
+		size = ret;
+	dbgp_get_data(data, size);
+	return ret;
+}
+
+static int dbgp_control_msg(unsigned devnum, int requesttype,
+	int request, int value, int index, void *data, int size)
+{
+	u32 pids, addr, ctrl;
+	struct usb_ctrlrequest req;
+	int read;
+	int ret;
+
+	read = (requesttype & USB_DIR_IN) != 0;
+	if (size > (read ? DBGP_MAX_PACKET : 0))
+		return -1;
+
+	/* Compute the control message */
+	req.bRequestType = requesttype;
+	req.bRequest = request;
+	req.wValue = cpu_to_le16(value);
+	req.wIndex = cpu_to_le16(index);
+	req.wLength = cpu_to_le16(size);
+
+	pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP);
+	addr = DBGP_EPADDR(devnum, 0);
+
+	ctrl = readl(&ehci_debug->control);
+	ctrl = dbgp_len_update(ctrl, sizeof(req));
+	ctrl |= DBGP_OUT;
+	ctrl |= DBGP_GO;
+
+	/* Send the setup message */
+	dbgp_set_data(&req, sizeof(req));
+	writel(addr, &ehci_debug->address);
+	writel(pids, &ehci_debug->pids);
+	ret = dbgp_wait_until_done(ctrl, DBGP_LOOPS);
+	if (ret < 0)
+		return ret;
+
+	/* Read the result */
+	return dbgp_bulk_read(devnum, 0, data, size, DBGP_LOOPS);
+}
+
+/* Find a PCI capability */
+static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap)
+{
+	u8 pos;
+	int bytes;
+
+	if (!(read_pci_config_16(num, slot, func, PCI_STATUS) &
+		PCI_STATUS_CAP_LIST))
+		return 0;
+
+	pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST);
+	for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) {
+		u8 id;
+
+		pos &= ~3;
+		id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID);
+		if (id == 0xff)
+			break;
+		if (id == cap)
+			return pos;
+
+		pos = read_pci_config_byte(num, slot, func,
+						 pos+PCI_CAP_LIST_NEXT);
+	}
+	return 0;
+}
+
+static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func)
+{
+	u32 class;
+
+	class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION);
+	if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI)
+		return 0;
+
+	return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG);
+}
+
+static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc)
+{
+	u32 bus, slot, func;
+
+	for (bus = 0; bus < 256; bus++) {
+		for (slot = 0; slot < 32; slot++) {
+			for (func = 0; func < 8; func++) {
+				unsigned cap;
+
+				cap = __find_dbgp(bus, slot, func);
+
+				if (!cap)
+					continue;
+				if (ehci_num-- != 0)
+					continue;
+				*rbus = bus;
+				*rslot = slot;
+				*rfunc = func;
+				return cap;
+			}
+		}
+	}
+	return 0;
+}
+
+static int dbgp_ehci_startup(void)
+{
+	u32 ctrl, cmd, status;
+	int loop;
+
+	/* Claim ownership, but do not enable yet */
+	ctrl = readl(&ehci_debug->control);
+	ctrl |= DBGP_OWNER;
+	ctrl &= ~(DBGP_ENABLED | DBGP_INUSE);
+	writel(ctrl, &ehci_debug->control);
+	udelay(1);
+
+	dbgp_ehci_status("EHCI startup");
+	/* Start the ehci running */
+	cmd = readl(&ehci_regs->command);
+	cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET);
+	cmd |= CMD_RUN;
+	writel(cmd, &ehci_regs->command);
+
+	/* Ensure everything is routed to the EHCI */
+	writel(FLAG_CF, &ehci_regs->configured_flag);
+
+	/* Wait until the controller is no longer halted */
+	loop = 1000;
+	do {
+		status = readl(&ehci_regs->status);
+		if (!(status & STS_HALT))
+			break;
+		udelay(1);
+	} while (--loop > 0);
+
+	if (!loop) {
+		dbgp_printk("ehci can not be started\n");
+		return -ENODEV;
+	}
+	dbgp_printk("ehci started\n");
+	return 0;
+}
+
+static int dbgp_ehci_controller_reset(void)
+{
+	int loop = 250 * 1000;
+	u32 cmd;
+
+	/* Reset the EHCI controller */
+	cmd = readl(&ehci_regs->command);
+	cmd |= CMD_RESET;
+	writel(cmd, &ehci_regs->command);
+	do {
+		cmd = readl(&ehci_regs->command);
+	} while ((cmd & CMD_RESET) && (--loop > 0));
+
+	if (!loop) {
+		dbgp_printk("can not reset ehci\n");
+		return -1;
+	}
+	dbgp_ehci_status("ehci reset done");
+	return 0;
+}
+static int ehci_wait_for_port(int port);
+/* Return 0 on success
+ * Return -ENODEV for any general failure
+ * Return -EIO if wait for port fails
+ */
+static int _dbgp_external_startup(void)
+{
+	int devnum;
+	struct usb_debug_descriptor dbgp_desc;
+	int ret;
+	u32 ctrl, portsc, cmd;
+	int dbg_port = dbgp_phys_port;
+	int tries = 3;
+	int reset_port_tries = 1;
+	int try_hard_once = 1;
+
+try_port_reset_again:
+	ret = dbgp_ehci_startup();
+	if (ret)
+		return ret;
+
+	/* Wait for a device to show up in the debug port */
+	ret = ehci_wait_for_port(dbg_port);
+	if (ret < 0) {
+		portsc = readl(&ehci_regs->port_status[dbg_port - 1]);
+		if (!(portsc & PORT_CONNECT) && try_hard_once) {
+			/* Last ditch effort to try to force enable
+			 * the debug device by using the packet test
+			 * ehci command to try and wake it up. */
+			try_hard_once = 0;
+			cmd = readl(&ehci_regs->command);
+			cmd &= ~CMD_RUN;
+			writel(cmd, &ehci_regs->command);
+			portsc = readl(&ehci_regs->port_status[dbg_port - 1]);
+			portsc |= PORT_TEST_PKT;
+			writel(portsc, &ehci_regs->port_status[dbg_port - 1]);
+			dbgp_ehci_status("Trying to force debug port online");
+			mdelay(50);
+			dbgp_ehci_controller_reset();
+			goto try_port_reset_again;
+		} else if (reset_port_tries--) {
+			goto try_port_reset_again;
+		}
+		dbgp_printk("No device found in debug port\n");
+		return -EIO;
+	}
+	dbgp_ehci_status("wait for port done");
+
+	/* Enable the debug port */
+	ctrl = readl(&ehci_debug->control);
+	ctrl |= DBGP_CLAIM;
+	writel(ctrl, &ehci_debug->control);
+	ctrl = readl(&ehci_debug->control);
+	if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) {
+		dbgp_printk("No device in debug port\n");
+		writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control);
+		return -ENODEV;
+	}
+	dbgp_ehci_status("debug ported enabled");
+
+	/* Completely transfer the debug device to the debug controller */
+	portsc = readl(&ehci_regs->port_status[dbg_port - 1]);
+	portsc &= ~PORT_PE;
+	writel(portsc, &ehci_regs->port_status[dbg_port - 1]);
+
+	dbgp_mdelay(100);
+
+try_again:
+	/* Find the debug device and make it device number 127 */
+	for (devnum = 0; devnum <= 127; devnum++) {
+		ret = dbgp_control_msg(devnum,
+			USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+			USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0,
+			&dbgp_desc, sizeof(dbgp_desc));
+		if (ret > 0)
+			break;
+	}
+	if (devnum > 127) {
+		dbgp_printk("Could not find attached debug device\n");
+		goto err;
+	}
+	dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint;
+	dbgp_endpoint_in = dbgp_desc.bDebugInEndpoint;
+
+	/* Move the device to 127 if it isn't already there */
+	if (devnum != USB_DEBUG_DEVNUM) {
+		ret = dbgp_control_msg(devnum,
+			USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+			USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0);
+		if (ret < 0) {
+			dbgp_printk("Could not move attached device to %d\n",
+				USB_DEBUG_DEVNUM);
+			goto err;
+		}
+		dbgp_printk("debug device renamed to 127\n");
+	}
+
+	/* Enable the debug interface */
+	ret = dbgp_control_msg(USB_DEBUG_DEVNUM,
+		USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+		USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0);
+	if (ret < 0) {
+		dbgp_printk(" Could not enable the debug device\n");
+		goto err;
+	}
+	dbgp_printk("debug interface enabled\n");
+	/* Perform a small write to get the even/odd data state in sync
+	 */
+	ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1);
+	if (ret < 0) {
+		dbgp_printk("dbgp_bulk_write failed: %d\n", ret);
+		goto err;
+	}
+	dbgp_printk("small write done\n");
+	dbgp_not_safe = 0;
+
+	return 0;
+err:
+	if (tries--)
+		goto try_again;
+	return -ENODEV;
+}
+
+static int ehci_reset_port(int port)
+{
+	u32 portsc;
+	u32 delay_time, delay;
+	int loop;
+
+	dbgp_ehci_status("reset port");
+	/* Reset the usb debug port */
+	portsc = readl(&ehci_regs->port_status[port - 1]);
+	portsc &= ~PORT_PE;
+	portsc |= PORT_RESET;
+	writel(portsc, &ehci_regs->port_status[port - 1]);
+
+	delay = HUB_ROOT_RESET_TIME;
+	for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT;
+	     delay_time += delay) {
+		dbgp_mdelay(delay);
+		portsc = readl(&ehci_regs->port_status[port - 1]);
+		if (!(portsc & PORT_RESET))
+			break;
+	}
+	if (portsc & PORT_RESET) {
+		/* force reset to complete */
+		loop = 100 * 1000;
+		writel(portsc & ~(PORT_RWC_BITS | PORT_RESET),
+			&ehci_regs->port_status[port - 1]);
+		do {
+			udelay(1);
+			portsc = readl(&ehci_regs->port_status[port-1]);
+		} while ((portsc & PORT_RESET) && (--loop > 0));
+	}
+
+	/* Device went away? */
+	if (!(portsc & PORT_CONNECT))
+		return -ENOTCONN;
+
+	/* bomb out completely if something weird happened */
+	if ((portsc & PORT_CSC))
+		return -EINVAL;
+
+	/* If we've finished resetting, then break out of the loop */
+	if (!(portsc & PORT_RESET) && (portsc & PORT_PE))
+		return 0;
+	return -EBUSY;
+}
+
+static int ehci_wait_for_port(int port)
+{
+	u32 status;
+	int ret, reps;
+
+	for (reps = 0; reps < 300; reps++) {
+		status = readl(&ehci_regs->status);
+		if (status & STS_PCD)
+			break;
+		dbgp_mdelay(1);
+	}
+	ret = ehci_reset_port(port);
+	if (ret == 0)
+		return 0;
+	return -ENOTCONN;
+}
+
+typedef void (*set_debug_port_t)(int port);
+
+static void __init default_set_debug_port(int port)
+{
+}
+
+static set_debug_port_t __initdata set_debug_port = default_set_debug_port;
+
+static void __init nvidia_set_debug_port(int port)
+{
+	u32 dword;
+	dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
+				 0x74);
+	dword &= ~(0x0f<<12);
+	dword |= ((port & 0x0f)<<12);
+	write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74,
+				 dword);
+	dbgp_printk("set debug port to %d\n", port);
+}
+
+static void __init detect_set_debug_port(void)
+{
+	u32 vendorid;
+
+	vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
+		 0x00);
+
+	if ((vendorid & 0xffff) == 0x10de) {
+		dbgp_printk("using nvidia set_debug_port\n");
+		set_debug_port = nvidia_set_debug_port;
+	}
+}
+
+/* The code in early_ehci_bios_handoff() is derived from the usb pci
+ * quirk initialization, but altered so as to use the early PCI
+ * routines. */
+#define EHCI_USBLEGSUP_BIOS	(1 << 16)	/* BIOS semaphore */
+#define EHCI_USBLEGCTLSTS	4		/* legacy control/status */
+static void __init early_ehci_bios_handoff(void)
+{
+	u32 hcc_params = readl(&ehci_caps->hcc_params);
+	int offset = (hcc_params >> 8) & 0xff;
+	u32 cap;
+	int msec;
+
+	if (!offset)
+		return;
+
+	cap = read_pci_config(ehci_dev.bus, ehci_dev.slot,
+			      ehci_dev.func, offset);
+	dbgp_printk("dbgp: ehci BIOS state %08x\n", cap);
+
+	if ((cap & 0xff) == 1 && (cap & EHCI_USBLEGSUP_BIOS)) {
+		dbgp_printk("dbgp: BIOS handoff\n");
+		write_pci_config_byte(ehci_dev.bus, ehci_dev.slot,
+				      ehci_dev.func, offset + 3, 1);
+	}
+
+	/* if boot firmware now owns EHCI, spin till it hands it over. */
+	msec = 1000;
+	while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) {
+		mdelay(10);
+		msec -= 10;
+		cap = read_pci_config(ehci_dev.bus, ehci_dev.slot,
+				      ehci_dev.func, offset);
+	}
+
+	if (cap & EHCI_USBLEGSUP_BIOS) {
+		/* well, possibly buggy BIOS... try to shut it down,
+		 * and hope nothing goes too wrong */
+		dbgp_printk("dbgp: BIOS handoff failed: %08x\n", cap);
+		write_pci_config_byte(ehci_dev.bus, ehci_dev.slot,
+				      ehci_dev.func, offset + 2, 0);
+	}
+
+	/* just in case, always disable EHCI SMIs */
+	write_pci_config_byte(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
+			      offset + EHCI_USBLEGCTLSTS, 0);
+}
+
+static int __init ehci_setup(void)
+{
+	u32 ctrl, portsc, hcs_params;
+	u32 debug_port, new_debug_port = 0, n_ports;
+	int ret, i;
+	int port_map_tried;
+	int playtimes = 3;
+
+	early_ehci_bios_handoff();
+
+try_next_time:
+	port_map_tried = 0;
+
+try_next_port:
+
+	hcs_params = readl(&ehci_caps->hcs_params);
+	debug_port = HCS_DEBUG_PORT(hcs_params);
+	dbgp_phys_port = debug_port;
+	n_ports    = HCS_N_PORTS(hcs_params);
+
+	dbgp_printk("debug_port: %d\n", debug_port);
+	dbgp_printk("n_ports:    %d\n", n_ports);
+	dbgp_ehci_status("");
+
+	for (i = 1; i <= n_ports; i++) {
+		portsc = readl(&ehci_regs->port_status[i-1]);
+		dbgp_printk("portstatus%d: %08x\n", i, portsc);
+	}
+
+	if (port_map_tried && (new_debug_port != debug_port)) {
+		if (--playtimes) {
+			set_debug_port(new_debug_port);
+			goto try_next_time;
+		}
+		return -1;
+	}
+
+	/* Only reset the controller if it is not already in the
+	 * configured state */
+	if (!(readl(&ehci_regs->configured_flag) & FLAG_CF)) {
+		if (dbgp_ehci_controller_reset() != 0)
+			return -1;
+	} else {
+		dbgp_ehci_status("ehci skip - already configured");
+	}
+
+	ret = _dbgp_external_startup();
+	if (ret == -EIO)
+		goto next_debug_port;
+
+	if (ret < 0) {
+		/* Things didn't work so remove my claim */
+		ctrl = readl(&ehci_debug->control);
+		ctrl &= ~(DBGP_CLAIM | DBGP_OUT);
+		writel(ctrl, &ehci_debug->control);
+		return -1;
+	}
+	return 0;
+
+next_debug_port:
+	port_map_tried |= (1<<(debug_port - 1));
+	new_debug_port = ((debug_port-1+1)%n_ports) + 1;
+	if (port_map_tried != ((1<<n_ports) - 1)) {
+		set_debug_port(new_debug_port);
+		goto try_next_port;
+	}
+	if (--playtimes) {
+		set_debug_port(new_debug_port);
+		goto try_next_time;
+	}
+
+	return -1;
+}
+
+int __init early_dbgp_init(char *s)
+{
+	u32 debug_port, bar, offset;
+	u32 bus, slot, func, cap;
+	void __iomem *ehci_bar;
+	u32 dbgp_num;
+	u32 bar_val;
+	char *e;
+	int ret;
+	u8 byte;
+
+	if (!early_pci_allowed())
+		return -1;
+
+	dbgp_num = 0;
+	if (*s)
+		dbgp_num = simple_strtoul(s, &e, 10);
+	dbgp_printk("dbgp_num: %d\n", dbgp_num);
+
+	cap = find_dbgp(dbgp_num, &bus, &slot, &func);
+	if (!cap)
+		return -1;
+
+	dbgp_printk("Found EHCI debug port on %02x:%02x.%1x\n", bus, slot,
+			 func);
+
+	debug_port = read_pci_config(bus, slot, func, cap);
+	bar = (debug_port >> 29) & 0x7;
+	bar = (bar * 4) + 0xc;
+	offset = (debug_port >> 16) & 0xfff;
+	dbgp_printk("bar: %02x offset: %03x\n", bar, offset);
+	if (bar != PCI_BASE_ADDRESS_0) {
+		dbgp_printk("only debug ports on bar 1 handled.\n");
+
+		return -1;
+	}
+
+	bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0);
+	dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset);
+	if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) {
+		dbgp_printk("only simple 32bit mmio bars supported\n");
+
+		return -1;
+	}
+
+	/* double check if the mem space is enabled */
+	byte = read_pci_config_byte(bus, slot, func, 0x04);
+	if (!(byte & 0x2)) {
+		byte  |= 0x02;
+		write_pci_config_byte(bus, slot, func, 0x04, byte);
+		dbgp_printk("mmio for ehci enabled\n");
+	}
+
+	/*
+	 * FIXME I don't have the bar size so just guess PAGE_SIZE is more
+	 * than enough.  1K is the biggest I have seen.
+	 */
+	set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK);
+	ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE);
+	ehci_bar += bar_val & ~PAGE_MASK;
+	dbgp_printk("ehci_bar: %p\n", ehci_bar);
+
+	ehci_caps  = ehci_bar;
+	ehci_regs  = ehci_bar + EARLY_HC_LENGTH(readl(&ehci_caps->hc_capbase));
+	ehci_debug = ehci_bar + offset;
+	ehci_dev.bus = bus;
+	ehci_dev.slot = slot;
+	ehci_dev.func = func;
+
+	detect_set_debug_port();
+
+	ret = ehci_setup();
+	if (ret < 0) {
+		dbgp_printk("ehci_setup failed\n");
+		ehci_debug = NULL;
+
+		return -1;
+	}
+	dbgp_ehci_status("early_init_complete");
+
+	return 0;
+}
+
+static void early_dbgp_write(struct console *con, const char *str, u32 n)
+{
+	int chunk;
+	char buf[DBGP_MAX_PACKET];
+	int use_cr = 0;
+	u32 cmd, ctrl;
+	int reset_run = 0;
+
+	if (!ehci_debug || dbgp_not_safe)
+		return;
+
+	cmd = readl(&ehci_regs->command);
+	if (unlikely(!(cmd & CMD_RUN))) {
+		/* If the ehci controller is not in the run state do extended
+		 * checks to see if the acpi or some other initialization also
+		 * reset the ehci debug port */
+		ctrl = readl(&ehci_debug->control);
+		if (!(ctrl & DBGP_ENABLED)) {
+			dbgp_not_safe = 1;
+			_dbgp_external_startup();
+		} else {
+			cmd |= CMD_RUN;
+			writel(cmd, &ehci_regs->command);
+			reset_run = 1;
+		}
+	}
+	while (n > 0) {
+		for (chunk = 0; chunk < DBGP_MAX_PACKET && n > 0;
+		     str++, chunk++, n--) {
+			if (!use_cr && *str == '\n') {
+				use_cr = 1;
+				buf[chunk] = '\r';
+				str--;
+				n++;
+				continue;
+			}
+			if (use_cr)
+				use_cr = 0;
+			buf[chunk] = *str;
+		}
+		if (chunk > 0) {
+			dbgp_bulk_write(USB_DEBUG_DEVNUM,
+					dbgp_endpoint_out, buf, chunk);
+		}
+	}
+	if (unlikely(reset_run)) {
+		cmd = readl(&ehci_regs->command);
+		cmd &= ~CMD_RUN;
+		writel(cmd, &ehci_regs->command);
+	}
+}
+
+struct console early_dbgp_console = {
+	.name =		"earlydbg",
+	.write =	early_dbgp_write,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+};
+
+#if IS_ENABLED(CONFIG_USB)
+int dbgp_reset_prep(struct usb_hcd *hcd)
+{
+	int ret = xen_dbgp_reset_prep(hcd);
+	u32 ctrl;
+
+	if (ret)
+		return ret;
+
+	dbgp_not_safe = 1;
+	if (!ehci_debug)
+		return 0;
+
+	if ((early_dbgp_console.index != -1 &&
+	     !(early_dbgp_console.flags & CON_BOOT)) ||
+	    dbgp_kgdb_mode)
+		return 1;
+	/* This means the console is not initialized, or should get
+	 * shutdown so as to allow for reuse of the usb device, which
+	 * means it is time to shutdown the usb debug port. */
+	ctrl = readl(&ehci_debug->control);
+	if (ctrl & DBGP_ENABLED) {
+		ctrl &= ~(DBGP_CLAIM);
+		writel(ctrl, &ehci_debug->control);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dbgp_reset_prep);
+
+int dbgp_external_startup(struct usb_hcd *hcd)
+{
+	return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
+}
+EXPORT_SYMBOL_GPL(dbgp_external_startup);
+#endif /* USB */
+
+#ifdef CONFIG_KGDB
+
+static char kgdbdbgp_buf[DBGP_MAX_PACKET];
+static int kgdbdbgp_buf_sz;
+static int kgdbdbgp_buf_idx;
+static int kgdbdbgp_loop_cnt = DBGP_LOOPS;
+
+static int kgdbdbgp_read_char(void)
+{
+	int ret;
+
+	if (kgdbdbgp_buf_idx < kgdbdbgp_buf_sz) {
+		char ch = kgdbdbgp_buf[kgdbdbgp_buf_idx++];
+		return ch;
+	}
+
+	ret = dbgp_bulk_read(USB_DEBUG_DEVNUM, dbgp_endpoint_in,
+			     &kgdbdbgp_buf, DBGP_MAX_PACKET,
+			     kgdbdbgp_loop_cnt);
+	if (ret <= 0)
+		return NO_POLL_CHAR;
+	kgdbdbgp_buf_sz = ret;
+	kgdbdbgp_buf_idx = 1;
+	return kgdbdbgp_buf[0];
+}
+
+static void kgdbdbgp_write_char(u8 chr)
+{
+	early_dbgp_write(NULL, &chr, 1);
+}
+
+static struct kgdb_io kgdbdbgp_io_ops = {
+	.name = "kgdbdbgp",
+	.read_char = kgdbdbgp_read_char,
+	.write_char = kgdbdbgp_write_char,
+};
+
+static int kgdbdbgp_wait_time;
+
+static int __init kgdbdbgp_parse_config(char *str)
+{
+	char *ptr;
+
+	if (!ehci_debug) {
+		if (early_dbgp_init(str))
+			return -1;
+	}
+	ptr = strchr(str, ',');
+	if (ptr) {
+		ptr++;
+		kgdbdbgp_wait_time = simple_strtoul(ptr, &ptr, 10);
+	}
+	kgdb_register_io_module(&kgdbdbgp_io_ops);
+	if (early_dbgp_console.index != -1)
+		kgdbdbgp_io_ops.cons = &early_dbgp_console;
+
+	return 0;
+}
+early_param("kgdbdbgp", kgdbdbgp_parse_config);
+
+static int kgdbdbgp_reader_thread(void *ptr)
+{
+	int ret;
+
+	while (readl(&ehci_debug->control) & DBGP_ENABLED) {
+		kgdbdbgp_loop_cnt = 1;
+		ret = kgdbdbgp_read_char();
+		kgdbdbgp_loop_cnt = DBGP_LOOPS;
+		if (ret != NO_POLL_CHAR) {
+			if (ret == 0x3 || ret == '$') {
+				if (ret == '$')
+					kgdbdbgp_buf_idx--;
+				kgdb_breakpoint();
+			}
+			continue;
+		}
+		schedule_timeout_interruptible(kgdbdbgp_wait_time * HZ);
+	}
+	return 0;
+}
+
+static int __init kgdbdbgp_start_thread(void)
+{
+	if (dbgp_kgdb_mode && kgdbdbgp_wait_time)
+		kthread_run(kgdbdbgp_reader_thread, NULL, "%s", "dbgp");
+
+	return 0;
+}
+device_initcall(kgdbdbgp_start_thread);
+#endif /* CONFIG_KGDB */
diff --git a/drivers/usb/early/xhci-dbc.c b/drivers/usb/early/xhci-dbc.c
new file mode 100644
index 000000000..7ef0a4b39
--- /dev/null
+++ b/drivers/usb/early/xhci-dbc.c
@@ -0,0 +1,1008 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xhci-dbc.c - xHCI debug capability early driver
+ *
+ * Copyright (C) 2016 Intel Corporation
+ *
+ * Author: Lu Baolu <baolu.lu@linux.intel.com>
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ":%s: " fmt, __func__
+
+#include <linux/console.h>
+#include <linux/pci_regs.h>
+#include <linux/pci_ids.h>
+#include <linux/memblock.h>
+#include <linux/io.h>
+#include <asm/pci-direct.h>
+#include <asm/fixmap.h>
+#include <linux/bcd.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/usb/xhci-dbgp.h>
+
+#include "../host/xhci.h"
+#include "xhci-dbc.h"
+
+static struct xdbc_state xdbc;
+static bool early_console_keep;
+
+#ifdef XDBC_TRACE
+#define	xdbc_trace	trace_printk
+#else
+static inline void xdbc_trace(const char *fmt, ...) { }
+#endif /* XDBC_TRACE */
+
+static void __iomem * __init xdbc_map_pci_mmio(u32 bus, u32 dev, u32 func)
+{
+	u64 val64, sz64, mask64;
+	void __iomem *base;
+	u32 val, sz;
+	u8 byte;
+
+	val = read_pci_config(bus, dev, func, PCI_BASE_ADDRESS_0);
+	write_pci_config(bus, dev, func, PCI_BASE_ADDRESS_0, ~0);
+	sz = read_pci_config(bus, dev, func, PCI_BASE_ADDRESS_0);
+	write_pci_config(bus, dev, func, PCI_BASE_ADDRESS_0, val);
+
+	if (val == 0xffffffff || sz == 0xffffffff) {
+		pr_notice("invalid mmio bar\n");
+		return NULL;
+	}
+
+	val64	= val & PCI_BASE_ADDRESS_MEM_MASK;
+	sz64	= sz & PCI_BASE_ADDRESS_MEM_MASK;
+	mask64	= PCI_BASE_ADDRESS_MEM_MASK;
+
+	if ((val & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == PCI_BASE_ADDRESS_MEM_TYPE_64) {
+		val = read_pci_config(bus, dev, func, PCI_BASE_ADDRESS_0 + 4);
+		write_pci_config(bus, dev, func, PCI_BASE_ADDRESS_0 + 4, ~0);
+		sz = read_pci_config(bus, dev, func, PCI_BASE_ADDRESS_0 + 4);
+		write_pci_config(bus, dev, func, PCI_BASE_ADDRESS_0 + 4, val);
+
+		val64	|= (u64)val << 32;
+		sz64	|= (u64)sz << 32;
+		mask64	|= ~0ULL << 32;
+	}
+
+	sz64 &= mask64;
+
+	if (!sz64) {
+		pr_notice("invalid mmio address\n");
+		return NULL;
+	}
+
+	sz64 = 1ULL << __ffs64(sz64);
+
+	/* Check if the mem space is enabled: */
+	byte = read_pci_config_byte(bus, dev, func, PCI_COMMAND);
+	if (!(byte & PCI_COMMAND_MEMORY)) {
+		byte |= PCI_COMMAND_MEMORY;
+		write_pci_config_byte(bus, dev, func, PCI_COMMAND, byte);
+	}
+
+	xdbc.xhci_start = val64;
+	xdbc.xhci_length = sz64;
+	base = early_ioremap(val64, sz64);
+
+	return base;
+}
+
+static void * __init xdbc_get_page(dma_addr_t *dma_addr)
+{
+	void *virt;
+
+	virt = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+	if (!virt)
+		return NULL;
+
+	if (dma_addr)
+		*dma_addr = (dma_addr_t)__pa(virt);
+
+	return virt;
+}
+
+static u32 __init xdbc_find_dbgp(int xdbc_num, u32 *b, u32 *d, u32 *f)
+{
+	u32 bus, dev, func, class;
+
+	for (bus = 0; bus < XDBC_PCI_MAX_BUSES; bus++) {
+		for (dev = 0; dev < XDBC_PCI_MAX_DEVICES; dev++) {
+			for (func = 0; func < XDBC_PCI_MAX_FUNCTION; func++) {
+
+				class = read_pci_config(bus, dev, func, PCI_CLASS_REVISION);
+				if ((class >> 8) != PCI_CLASS_SERIAL_USB_XHCI)
+					continue;
+
+				if (xdbc_num-- != 0)
+					continue;
+
+				*b = bus;
+				*d = dev;
+				*f = func;
+
+				return 0;
+			}
+		}
+	}
+
+	return -1;
+}
+
+static int handshake(void __iomem *ptr, u32 mask, u32 done, int wait, int delay)
+{
+	u32 result;
+
+	/* Can not use readl_poll_timeout_atomic() for early boot things */
+	do {
+		result = readl(ptr);
+		result &= mask;
+		if (result == done)
+			return 0;
+		udelay(delay);
+		wait -= delay;
+	} while (wait > 0);
+
+	return -ETIMEDOUT;
+}
+
+static void __init xdbc_bios_handoff(void)
+{
+	int offset, timeout;
+	u32 val;
+
+	offset = xhci_find_next_ext_cap(xdbc.xhci_base, 0, XHCI_EXT_CAPS_LEGACY);
+	val = readl(xdbc.xhci_base + offset);
+
+	if (val & XHCI_HC_BIOS_OWNED) {
+		writel(val | XHCI_HC_OS_OWNED, xdbc.xhci_base + offset);
+		timeout = handshake(xdbc.xhci_base + offset, XHCI_HC_BIOS_OWNED, 0, 5000, 10);
+
+		if (timeout) {
+			pr_notice("failed to hand over xHCI control from BIOS\n");
+			writel(val & ~XHCI_HC_BIOS_OWNED, xdbc.xhci_base + offset);
+		}
+	}
+
+	/* Disable BIOS SMIs and clear all SMI events: */
+	val = readl(xdbc.xhci_base + offset + XHCI_LEGACY_CONTROL_OFFSET);
+	val &= XHCI_LEGACY_DISABLE_SMI;
+	val |= XHCI_LEGACY_SMI_EVENTS;
+	writel(val, xdbc.xhci_base + offset + XHCI_LEGACY_CONTROL_OFFSET);
+}
+
+static int __init
+xdbc_alloc_ring(struct xdbc_segment *seg, struct xdbc_ring *ring)
+{
+	seg->trbs = xdbc_get_page(&seg->dma);
+	if (!seg->trbs)
+		return -ENOMEM;
+
+	ring->segment = seg;
+
+	return 0;
+}
+
+static void __init xdbc_free_ring(struct xdbc_ring *ring)
+{
+	struct xdbc_segment *seg = ring->segment;
+
+	if (!seg)
+		return;
+
+	memblock_phys_free(seg->dma, PAGE_SIZE);
+	ring->segment = NULL;
+}
+
+static void xdbc_reset_ring(struct xdbc_ring *ring)
+{
+	struct xdbc_segment *seg = ring->segment;
+	struct xdbc_trb *link_trb;
+
+	memset(seg->trbs, 0, PAGE_SIZE);
+
+	ring->enqueue = seg->trbs;
+	ring->dequeue = seg->trbs;
+	ring->cycle_state = 1;
+
+	if (ring != &xdbc.evt_ring) {
+		link_trb = &seg->trbs[XDBC_TRBS_PER_SEGMENT - 1];
+		link_trb->field[0] = cpu_to_le32(lower_32_bits(seg->dma));
+		link_trb->field[1] = cpu_to_le32(upper_32_bits(seg->dma));
+		link_trb->field[3] = cpu_to_le32(TRB_TYPE(TRB_LINK)) | cpu_to_le32(LINK_TOGGLE);
+	}
+}
+
+static inline void xdbc_put_utf16(u16 *s, const char *c, size_t size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		s[i] = cpu_to_le16(c[i]);
+}
+
+static void xdbc_mem_init(void)
+{
+	struct xdbc_ep_context *ep_in, *ep_out;
+	struct usb_string_descriptor *s_desc;
+	struct xdbc_erst_entry *entry;
+	struct xdbc_strings *strings;
+	struct xdbc_context *ctx;
+	unsigned int max_burst;
+	u32 string_length;
+	int index = 0;
+	u32 dev_info;
+
+	xdbc_reset_ring(&xdbc.evt_ring);
+	xdbc_reset_ring(&xdbc.in_ring);
+	xdbc_reset_ring(&xdbc.out_ring);
+	memset(xdbc.table_base, 0, PAGE_SIZE);
+	memset(xdbc.out_buf, 0, PAGE_SIZE);
+
+	/* Initialize event ring segment table: */
+	xdbc.erst_size	= 16;
+	xdbc.erst_base	= xdbc.table_base + index * XDBC_TABLE_ENTRY_SIZE;
+	xdbc.erst_dma	= xdbc.table_dma + index * XDBC_TABLE_ENTRY_SIZE;
+
+	index += XDBC_ERST_ENTRY_NUM;
+	entry = (struct xdbc_erst_entry *)xdbc.erst_base;
+
+	entry->seg_addr		= cpu_to_le64(xdbc.evt_seg.dma);
+	entry->seg_size		= cpu_to_le32(XDBC_TRBS_PER_SEGMENT);
+	entry->__reserved_0	= 0;
+
+	/* Initialize ERST registers: */
+	writel(1, &xdbc.xdbc_reg->ersts);
+	xdbc_write64(xdbc.erst_dma, &xdbc.xdbc_reg->erstba);
+	xdbc_write64(xdbc.evt_seg.dma, &xdbc.xdbc_reg->erdp);
+
+	/* Debug capability contexts: */
+	xdbc.dbcc_size	= 64 * 3;
+	xdbc.dbcc_base	= xdbc.table_base + index * XDBC_TABLE_ENTRY_SIZE;
+	xdbc.dbcc_dma	= xdbc.table_dma + index * XDBC_TABLE_ENTRY_SIZE;
+
+	index += XDBC_DBCC_ENTRY_NUM;
+
+	/* Popluate the strings: */
+	xdbc.string_size = sizeof(struct xdbc_strings);
+	xdbc.string_base = xdbc.table_base + index * XDBC_TABLE_ENTRY_SIZE;
+	xdbc.string_dma	 = xdbc.table_dma + index * XDBC_TABLE_ENTRY_SIZE;
+	strings		 = (struct xdbc_strings *)xdbc.string_base;
+
+	index += XDBC_STRING_ENTRY_NUM;
+
+	/* Serial string: */
+	s_desc			= (struct usb_string_descriptor *)strings->serial;
+	s_desc->bLength		= (strlen(XDBC_STRING_SERIAL) + 1) * 2;
+	s_desc->bDescriptorType	= USB_DT_STRING;
+
+	xdbc_put_utf16(s_desc->wData, XDBC_STRING_SERIAL, strlen(XDBC_STRING_SERIAL));
+	string_length = s_desc->bLength;
+	string_length <<= 8;
+
+	/* Product string: */
+	s_desc			= (struct usb_string_descriptor *)strings->product;
+	s_desc->bLength		= (strlen(XDBC_STRING_PRODUCT) + 1) * 2;
+	s_desc->bDescriptorType	= USB_DT_STRING;
+
+	xdbc_put_utf16(s_desc->wData, XDBC_STRING_PRODUCT, strlen(XDBC_STRING_PRODUCT));
+	string_length += s_desc->bLength;
+	string_length <<= 8;
+
+	/* Manufacture string: */
+	s_desc			= (struct usb_string_descriptor *)strings->manufacturer;
+	s_desc->bLength		= (strlen(XDBC_STRING_MANUFACTURER) + 1) * 2;
+	s_desc->bDescriptorType	= USB_DT_STRING;
+
+	xdbc_put_utf16(s_desc->wData, XDBC_STRING_MANUFACTURER, strlen(XDBC_STRING_MANUFACTURER));
+	string_length += s_desc->bLength;
+	string_length <<= 8;
+
+	/* String0: */
+	strings->string0[0]	= 4;
+	strings->string0[1]	= USB_DT_STRING;
+	strings->string0[2]	= 0x09;
+	strings->string0[3]	= 0x04;
+
+	string_length += 4;
+
+	/* Populate info Context: */
+	ctx = (struct xdbc_context *)xdbc.dbcc_base;
+
+	ctx->info.string0	= cpu_to_le64(xdbc.string_dma);
+	ctx->info.manufacturer	= cpu_to_le64(xdbc.string_dma + XDBC_MAX_STRING_LENGTH);
+	ctx->info.product	= cpu_to_le64(xdbc.string_dma + XDBC_MAX_STRING_LENGTH * 2);
+	ctx->info.serial	= cpu_to_le64(xdbc.string_dma + XDBC_MAX_STRING_LENGTH * 3);
+	ctx->info.length	= cpu_to_le32(string_length);
+
+	/* Populate bulk out endpoint context: */
+	max_burst = DEBUG_MAX_BURST(readl(&xdbc.xdbc_reg->control));
+	ep_out = (struct xdbc_ep_context *)&ctx->out;
+
+	ep_out->ep_info1	= 0;
+	ep_out->ep_info2	= cpu_to_le32(EP_TYPE(BULK_OUT_EP) | MAX_PACKET(1024) | MAX_BURST(max_burst));
+	ep_out->deq		= cpu_to_le64(xdbc.out_seg.dma | xdbc.out_ring.cycle_state);
+
+	/* Populate bulk in endpoint context: */
+	ep_in = (struct xdbc_ep_context *)&ctx->in;
+
+	ep_in->ep_info1		= 0;
+	ep_in->ep_info2		= cpu_to_le32(EP_TYPE(BULK_IN_EP) | MAX_PACKET(1024) | MAX_BURST(max_burst));
+	ep_in->deq		= cpu_to_le64(xdbc.in_seg.dma | xdbc.in_ring.cycle_state);
+
+	/* Set DbC context and info registers: */
+	xdbc_write64(xdbc.dbcc_dma, &xdbc.xdbc_reg->dccp);
+
+	dev_info = cpu_to_le32((XDBC_VENDOR_ID << 16) | XDBC_PROTOCOL);
+	writel(dev_info, &xdbc.xdbc_reg->devinfo1);
+
+	dev_info = cpu_to_le32((XDBC_DEVICE_REV << 16) | XDBC_PRODUCT_ID);
+	writel(dev_info, &xdbc.xdbc_reg->devinfo2);
+
+	xdbc.in_buf = xdbc.out_buf + XDBC_MAX_PACKET;
+	xdbc.in_dma = xdbc.out_dma + XDBC_MAX_PACKET;
+}
+
+static void xdbc_do_reset_debug_port(u32 id, u32 count)
+{
+	void __iomem *ops_reg;
+	void __iomem *portsc;
+	u32 val, cap_length;
+	int i;
+
+	cap_length = readl(xdbc.xhci_base) & 0xff;
+	ops_reg = xdbc.xhci_base + cap_length;
+
+	id--;
+	for (i = id; i < (id + count); i++) {
+		portsc = ops_reg + 0x400 + i * 0x10;
+		val = readl(portsc);
+		if (!(val & PORT_CONNECT))
+			writel(val | PORT_RESET, portsc);
+	}
+}
+
+static void xdbc_reset_debug_port(void)
+{
+	u32 val, port_offset, port_count;
+	int offset = 0;
+
+	do {
+		offset = xhci_find_next_ext_cap(xdbc.xhci_base, offset, XHCI_EXT_CAPS_PROTOCOL);
+		if (!offset)
+			break;
+
+		val = readl(xdbc.xhci_base + offset);
+		if (XHCI_EXT_PORT_MAJOR(val) != 0x3)
+			continue;
+
+		val = readl(xdbc.xhci_base + offset + 8);
+		port_offset = XHCI_EXT_PORT_OFF(val);
+		port_count = XHCI_EXT_PORT_COUNT(val);
+
+		xdbc_do_reset_debug_port(port_offset, port_count);
+	} while (1);
+}
+
+static void
+xdbc_queue_trb(struct xdbc_ring *ring, u32 field1, u32 field2, u32 field3, u32 field4)
+{
+	struct xdbc_trb *trb, *link_trb;
+
+	trb = ring->enqueue;
+	trb->field[0] = cpu_to_le32(field1);
+	trb->field[1] = cpu_to_le32(field2);
+	trb->field[2] = cpu_to_le32(field3);
+	trb->field[3] = cpu_to_le32(field4);
+
+	++(ring->enqueue);
+	if (ring->enqueue >= &ring->segment->trbs[TRBS_PER_SEGMENT - 1]) {
+		link_trb = ring->enqueue;
+		if (ring->cycle_state)
+			link_trb->field[3] |= cpu_to_le32(TRB_CYCLE);
+		else
+			link_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
+
+		ring->enqueue = ring->segment->trbs;
+		ring->cycle_state ^= 1;
+	}
+}
+
+static void xdbc_ring_doorbell(int target)
+{
+	writel(DOOR_BELL_TARGET(target), &xdbc.xdbc_reg->doorbell);
+}
+
+static int xdbc_start(void)
+{
+	u32 ctrl, status;
+	int ret;
+
+	ctrl = readl(&xdbc.xdbc_reg->control);
+	writel(ctrl | CTRL_DBC_ENABLE | CTRL_PORT_ENABLE, &xdbc.xdbc_reg->control);
+	ret = handshake(&xdbc.xdbc_reg->control, CTRL_DBC_ENABLE, CTRL_DBC_ENABLE, 100000, 100);
+	if (ret) {
+		xdbc_trace("failed to initialize hardware\n");
+		return ret;
+	}
+
+	/* Reset port to avoid bus hang: */
+	if (xdbc.vendor == PCI_VENDOR_ID_INTEL)
+		xdbc_reset_debug_port();
+
+	/* Wait for port connection: */
+	ret = handshake(&xdbc.xdbc_reg->portsc, PORTSC_CONN_STATUS, PORTSC_CONN_STATUS, 5000000, 100);
+	if (ret) {
+		xdbc_trace("waiting for connection timed out\n");
+		return ret;
+	}
+
+	/* Wait for debug device to be configured: */
+	ret = handshake(&xdbc.xdbc_reg->control, CTRL_DBC_RUN, CTRL_DBC_RUN, 5000000, 100);
+	if (ret) {
+		xdbc_trace("waiting for device configuration timed out\n");
+		return ret;
+	}
+
+	/* Check port number: */
+	status = readl(&xdbc.xdbc_reg->status);
+	if (!DCST_DEBUG_PORT(status)) {
+		xdbc_trace("invalid root hub port number\n");
+		return -ENODEV;
+	}
+
+	xdbc.port_number = DCST_DEBUG_PORT(status);
+
+	xdbc_trace("DbC is running now, control 0x%08x port ID %d\n",
+		   readl(&xdbc.xdbc_reg->control), xdbc.port_number);
+
+	return 0;
+}
+
+static int xdbc_bulk_transfer(void *data, int size, bool read)
+{
+	struct xdbc_ring *ring;
+	struct xdbc_trb *trb;
+	u32 length, control;
+	u32 cycle;
+	u64 addr;
+
+	if (size > XDBC_MAX_PACKET) {
+		xdbc_trace("bad parameter, size %d\n", size);
+		return -EINVAL;
+	}
+
+	if (!(xdbc.flags & XDBC_FLAGS_INITIALIZED) ||
+	    !(xdbc.flags & XDBC_FLAGS_CONFIGURED) ||
+	    (!read && (xdbc.flags & XDBC_FLAGS_OUT_STALL)) ||
+	    (read && (xdbc.flags & XDBC_FLAGS_IN_STALL))) {
+
+		xdbc_trace("connection not ready, flags %08x\n", xdbc.flags);
+		return -EIO;
+	}
+
+	ring = (read ? &xdbc.in_ring : &xdbc.out_ring);
+	trb = ring->enqueue;
+	cycle = ring->cycle_state;
+	length = TRB_LEN(size);
+	control = TRB_TYPE(TRB_NORMAL) | TRB_IOC;
+
+	if (cycle)
+		control &= cpu_to_le32(~TRB_CYCLE);
+	else
+		control |= cpu_to_le32(TRB_CYCLE);
+
+	if (read) {
+		memset(xdbc.in_buf, 0, XDBC_MAX_PACKET);
+		addr = xdbc.in_dma;
+		xdbc.flags |= XDBC_FLAGS_IN_PROCESS;
+	} else {
+		memset(xdbc.out_buf, 0, XDBC_MAX_PACKET);
+		memcpy(xdbc.out_buf, data, size);
+		addr = xdbc.out_dma;
+		xdbc.flags |= XDBC_FLAGS_OUT_PROCESS;
+	}
+
+	xdbc_queue_trb(ring, lower_32_bits(addr), upper_32_bits(addr), length, control);
+
+	/*
+	 * Add a barrier between writes of trb fields and flipping
+	 * the cycle bit:
+	 */
+	wmb();
+	if (cycle)
+		trb->field[3] |= cpu_to_le32(cycle);
+	else
+		trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
+
+	xdbc_ring_doorbell(read ? IN_EP_DOORBELL : OUT_EP_DOORBELL);
+
+	return size;
+}
+
+static int xdbc_handle_external_reset(void)
+{
+	int ret = 0;
+
+	xdbc.flags = 0;
+	writel(0, &xdbc.xdbc_reg->control);
+	ret = handshake(&xdbc.xdbc_reg->control, CTRL_DBC_ENABLE, 0, 100000, 10);
+	if (ret)
+		goto reset_out;
+
+	xdbc_mem_init();
+
+	ret = xdbc_start();
+	if (ret < 0)
+		goto reset_out;
+
+	xdbc_trace("dbc recovered\n");
+
+	xdbc.flags |= XDBC_FLAGS_INITIALIZED | XDBC_FLAGS_CONFIGURED;
+
+	xdbc_bulk_transfer(NULL, XDBC_MAX_PACKET, true);
+
+	return 0;
+
+reset_out:
+	xdbc_trace("failed to recover from external reset\n");
+	return ret;
+}
+
+static int __init xdbc_early_setup(void)
+{
+	int ret;
+
+	writel(0, &xdbc.xdbc_reg->control);
+	ret = handshake(&xdbc.xdbc_reg->control, CTRL_DBC_ENABLE, 0, 100000, 100);
+	if (ret)
+		return ret;
+
+	/* Allocate the table page: */
+	xdbc.table_base = xdbc_get_page(&xdbc.table_dma);
+	if (!xdbc.table_base)
+		return -ENOMEM;
+
+	/* Get and store the transfer buffer: */
+	xdbc.out_buf = xdbc_get_page(&xdbc.out_dma);
+	if (!xdbc.out_buf)
+		return -ENOMEM;
+
+	/* Allocate the event ring: */
+	ret = xdbc_alloc_ring(&xdbc.evt_seg, &xdbc.evt_ring);
+	if (ret < 0)
+		return ret;
+
+	/* Allocate IN/OUT endpoint transfer rings: */
+	ret = xdbc_alloc_ring(&xdbc.in_seg, &xdbc.in_ring);
+	if (ret < 0)
+		return ret;
+
+	ret = xdbc_alloc_ring(&xdbc.out_seg, &xdbc.out_ring);
+	if (ret < 0)
+		return ret;
+
+	xdbc_mem_init();
+
+	ret = xdbc_start();
+	if (ret < 0) {
+		writel(0, &xdbc.xdbc_reg->control);
+		return ret;
+	}
+
+	xdbc.flags |= XDBC_FLAGS_INITIALIZED | XDBC_FLAGS_CONFIGURED;
+
+	xdbc_bulk_transfer(NULL, XDBC_MAX_PACKET, true);
+
+	return 0;
+}
+
+int __init early_xdbc_parse_parameter(char *s, int keep_early)
+{
+	unsigned long dbgp_num = 0;
+	u32 bus, dev, func, offset;
+	char *e;
+	int ret;
+
+	if (!early_pci_allowed())
+		return -EPERM;
+
+	early_console_keep = keep_early;
+
+	if (xdbc.xdbc_reg)
+		return 0;
+
+	if (*s) {
+	       dbgp_num = simple_strtoul(s, &e, 10);
+	       if (s == e)
+		       dbgp_num = 0;
+	}
+
+	pr_notice("dbgp_num: %lu\n", dbgp_num);
+
+	/* Locate the host controller: */
+	ret = xdbc_find_dbgp(dbgp_num, &bus, &dev, &func);
+	if (ret) {
+		pr_notice("failed to locate xhci host\n");
+		return -ENODEV;
+	}
+
+	xdbc.vendor	= read_pci_config_16(bus, dev, func, PCI_VENDOR_ID);
+	xdbc.device	= read_pci_config_16(bus, dev, func, PCI_DEVICE_ID);
+	xdbc.bus	= bus;
+	xdbc.dev	= dev;
+	xdbc.func	= func;
+
+	/* Map the IO memory: */
+	xdbc.xhci_base = xdbc_map_pci_mmio(bus, dev, func);
+	if (!xdbc.xhci_base)
+		return -EINVAL;
+
+	/* Locate DbC registers: */
+	offset = xhci_find_next_ext_cap(xdbc.xhci_base, 0, XHCI_EXT_CAPS_DEBUG);
+	if (!offset) {
+		pr_notice("xhci host doesn't support debug capability\n");
+		early_iounmap(xdbc.xhci_base, xdbc.xhci_length);
+		xdbc.xhci_base = NULL;
+		xdbc.xhci_length = 0;
+
+		return -ENODEV;
+	}
+	xdbc.xdbc_reg = (struct xdbc_regs __iomem *)(xdbc.xhci_base + offset);
+
+	return 0;
+}
+
+int __init early_xdbc_setup_hardware(void)
+{
+	int ret;
+
+	if (!xdbc.xdbc_reg)
+		return -ENODEV;
+
+	xdbc_bios_handoff();
+
+	raw_spin_lock_init(&xdbc.lock);
+
+	ret = xdbc_early_setup();
+	if (ret) {
+		pr_notice("failed to setup the connection to host\n");
+
+		xdbc_free_ring(&xdbc.evt_ring);
+		xdbc_free_ring(&xdbc.out_ring);
+		xdbc_free_ring(&xdbc.in_ring);
+
+		if (xdbc.table_dma)
+			memblock_phys_free(xdbc.table_dma, PAGE_SIZE);
+
+		if (xdbc.out_dma)
+			memblock_phys_free(xdbc.out_dma, PAGE_SIZE);
+
+		xdbc.table_base = NULL;
+		xdbc.out_buf = NULL;
+	}
+
+	return ret;
+}
+
+static void xdbc_handle_port_status(struct xdbc_trb *evt_trb)
+{
+	u32 port_reg;
+
+	port_reg = readl(&xdbc.xdbc_reg->portsc);
+	if (port_reg & PORTSC_CONN_CHANGE) {
+		xdbc_trace("connect status change event\n");
+
+		/* Check whether cable unplugged: */
+		if (!(port_reg & PORTSC_CONN_STATUS)) {
+			xdbc.flags = 0;
+			xdbc_trace("cable unplugged\n");
+		}
+	}
+
+	if (port_reg & PORTSC_RESET_CHANGE)
+		xdbc_trace("port reset change event\n");
+
+	if (port_reg & PORTSC_LINK_CHANGE)
+		xdbc_trace("port link status change event\n");
+
+	if (port_reg & PORTSC_CONFIG_CHANGE)
+		xdbc_trace("config error change\n");
+
+	/* Write back the value to clear RW1C bits: */
+	writel(port_reg, &xdbc.xdbc_reg->portsc);
+}
+
+static void xdbc_handle_tx_event(struct xdbc_trb *evt_trb)
+{
+	u32 comp_code;
+	int ep_id;
+
+	comp_code	= GET_COMP_CODE(le32_to_cpu(evt_trb->field[2]));
+	ep_id		= TRB_TO_EP_ID(le32_to_cpu(evt_trb->field[3]));
+
+	switch (comp_code) {
+	case COMP_SUCCESS:
+	case COMP_SHORT_PACKET:
+		break;
+	case COMP_TRB_ERROR:
+	case COMP_BABBLE_DETECTED_ERROR:
+	case COMP_USB_TRANSACTION_ERROR:
+	case COMP_STALL_ERROR:
+	default:
+		if (ep_id == XDBC_EPID_OUT || ep_id == XDBC_EPID_OUT_INTEL)
+			xdbc.flags |= XDBC_FLAGS_OUT_STALL;
+		if (ep_id == XDBC_EPID_IN || ep_id == XDBC_EPID_IN_INTEL)
+			xdbc.flags |= XDBC_FLAGS_IN_STALL;
+
+		xdbc_trace("endpoint %d stalled\n", ep_id);
+		break;
+	}
+
+	if (ep_id == XDBC_EPID_IN || ep_id == XDBC_EPID_IN_INTEL) {
+		xdbc.flags &= ~XDBC_FLAGS_IN_PROCESS;
+		xdbc_bulk_transfer(NULL, XDBC_MAX_PACKET, true);
+	} else if (ep_id == XDBC_EPID_OUT || ep_id == XDBC_EPID_OUT_INTEL) {
+		xdbc.flags &= ~XDBC_FLAGS_OUT_PROCESS;
+	} else {
+		xdbc_trace("invalid endpoint id %d\n", ep_id);
+	}
+}
+
+static void xdbc_handle_events(void)
+{
+	struct xdbc_trb *evt_trb;
+	bool update_erdp = false;
+	u32 reg;
+	u8 cmd;
+
+	cmd = read_pci_config_byte(xdbc.bus, xdbc.dev, xdbc.func, PCI_COMMAND);
+	if (!(cmd & PCI_COMMAND_MASTER)) {
+		cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+		write_pci_config_byte(xdbc.bus, xdbc.dev, xdbc.func, PCI_COMMAND, cmd);
+	}
+
+	if (!(xdbc.flags & XDBC_FLAGS_INITIALIZED))
+		return;
+
+	/* Handle external reset events: */
+	reg = readl(&xdbc.xdbc_reg->control);
+	if (!(reg & CTRL_DBC_ENABLE)) {
+		if (xdbc_handle_external_reset()) {
+			xdbc_trace("failed to recover connection\n");
+			return;
+		}
+	}
+
+	/* Handle configure-exit event: */
+	reg = readl(&xdbc.xdbc_reg->control);
+	if (reg & CTRL_DBC_RUN_CHANGE) {
+		writel(reg, &xdbc.xdbc_reg->control);
+		if (reg & CTRL_DBC_RUN)
+			xdbc.flags |= XDBC_FLAGS_CONFIGURED;
+		else
+			xdbc.flags &= ~XDBC_FLAGS_CONFIGURED;
+	}
+
+	/* Handle endpoint stall event: */
+	reg = readl(&xdbc.xdbc_reg->control);
+	if (reg & CTRL_HALT_IN_TR) {
+		xdbc.flags |= XDBC_FLAGS_IN_STALL;
+	} else {
+		xdbc.flags &= ~XDBC_FLAGS_IN_STALL;
+		if (!(xdbc.flags & XDBC_FLAGS_IN_PROCESS))
+			xdbc_bulk_transfer(NULL, XDBC_MAX_PACKET, true);
+	}
+
+	if (reg & CTRL_HALT_OUT_TR)
+		xdbc.flags |= XDBC_FLAGS_OUT_STALL;
+	else
+		xdbc.flags &= ~XDBC_FLAGS_OUT_STALL;
+
+	/* Handle the events in the event ring: */
+	evt_trb = xdbc.evt_ring.dequeue;
+	while ((le32_to_cpu(evt_trb->field[3]) & TRB_CYCLE) == xdbc.evt_ring.cycle_state) {
+		/*
+		 * Add a barrier between reading the cycle flag and any
+		 * reads of the event's flags/data below:
+		 */
+		rmb();
+
+		switch ((le32_to_cpu(evt_trb->field[3]) & TRB_TYPE_BITMASK)) {
+		case TRB_TYPE(TRB_PORT_STATUS):
+			xdbc_handle_port_status(evt_trb);
+			break;
+		case TRB_TYPE(TRB_TRANSFER):
+			xdbc_handle_tx_event(evt_trb);
+			break;
+		default:
+			break;
+		}
+
+		++(xdbc.evt_ring.dequeue);
+		if (xdbc.evt_ring.dequeue == &xdbc.evt_seg.trbs[TRBS_PER_SEGMENT]) {
+			xdbc.evt_ring.dequeue = xdbc.evt_seg.trbs;
+			xdbc.evt_ring.cycle_state ^= 1;
+		}
+
+		evt_trb = xdbc.evt_ring.dequeue;
+		update_erdp = true;
+	}
+
+	/* Update event ring dequeue pointer: */
+	if (update_erdp)
+		xdbc_write64(__pa(xdbc.evt_ring.dequeue), &xdbc.xdbc_reg->erdp);
+}
+
+static int xdbc_bulk_write(const char *bytes, int size)
+{
+	int ret, timeout = 0;
+	unsigned long flags;
+
+retry:
+	if (in_nmi()) {
+		if (!raw_spin_trylock_irqsave(&xdbc.lock, flags))
+			return -EAGAIN;
+	} else {
+		raw_spin_lock_irqsave(&xdbc.lock, flags);
+	}
+
+	xdbc_handle_events();
+
+	/* Check completion of the previous request: */
+	if ((xdbc.flags & XDBC_FLAGS_OUT_PROCESS) && (timeout < 2000000)) {
+		raw_spin_unlock_irqrestore(&xdbc.lock, flags);
+		udelay(100);
+		timeout += 100;
+		goto retry;
+	}
+
+	if (xdbc.flags & XDBC_FLAGS_OUT_PROCESS) {
+		raw_spin_unlock_irqrestore(&xdbc.lock, flags);
+		xdbc_trace("previous transfer not completed yet\n");
+
+		return -ETIMEDOUT;
+	}
+
+	ret = xdbc_bulk_transfer((void *)bytes, size, false);
+	raw_spin_unlock_irqrestore(&xdbc.lock, flags);
+
+	return ret;
+}
+
+static void early_xdbc_write(struct console *con, const char *str, u32 n)
+{
+	/* static variables are zeroed, so buf is always NULL terminated */
+	static char buf[XDBC_MAX_PACKET + 1];
+	int chunk, ret;
+	int use_cr = 0;
+
+	if (!xdbc.xdbc_reg)
+		return;
+	memset(buf, 0, XDBC_MAX_PACKET);
+	while (n > 0) {
+		for (chunk = 0; chunk < XDBC_MAX_PACKET && n > 0; str++, chunk++, n--) {
+
+			if (!use_cr && *str == '\n') {
+				use_cr = 1;
+				buf[chunk] = '\r';
+				str--;
+				n++;
+				continue;
+			}
+
+			if (use_cr)
+				use_cr = 0;
+			buf[chunk] = *str;
+		}
+
+		if (chunk > 0) {
+			ret = xdbc_bulk_write(buf, chunk);
+			if (ret < 0)
+				xdbc_trace("missed message {%s}\n", buf);
+		}
+	}
+}
+
+static struct console early_xdbc_console = {
+	.name		= "earlyxdbc",
+	.write		= early_xdbc_write,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+};
+
+void __init early_xdbc_register_console(void)
+{
+	if (early_console)
+		return;
+
+	early_console = &early_xdbc_console;
+	if (early_console_keep)
+		early_console->flags &= ~CON_BOOT;
+	else
+		early_console->flags |= CON_BOOT;
+	register_console(early_console);
+}
+
+static void xdbc_unregister_console(void)
+{
+	if (early_xdbc_console.flags & CON_ENABLED)
+		unregister_console(&early_xdbc_console);
+}
+
+static int xdbc_scrub_function(void *ptr)
+{
+	unsigned long flags;
+
+	while (true) {
+		raw_spin_lock_irqsave(&xdbc.lock, flags);
+		xdbc_handle_events();
+
+		if (!(xdbc.flags & XDBC_FLAGS_INITIALIZED)) {
+			raw_spin_unlock_irqrestore(&xdbc.lock, flags);
+			break;
+		}
+
+		raw_spin_unlock_irqrestore(&xdbc.lock, flags);
+		schedule_timeout_interruptible(1);
+	}
+
+	xdbc_unregister_console();
+	writel(0, &xdbc.xdbc_reg->control);
+	xdbc_trace("dbc scrub function exits\n");
+
+	return 0;
+}
+
+static int __init xdbc_init(void)
+{
+	unsigned long flags;
+	void __iomem *base;
+	int ret = 0;
+	u32 offset;
+
+	if (!(xdbc.flags & XDBC_FLAGS_INITIALIZED))
+		return 0;
+
+	/*
+	 * It's time to shut down the DbC, so that the debug
+	 * port can be reused by the host controller:
+	 */
+	if (early_xdbc_console.index == -1 ||
+	    (early_xdbc_console.flags & CON_BOOT)) {
+		xdbc_trace("hardware not used anymore\n");
+		goto free_and_quit;
+	}
+
+	base = ioremap(xdbc.xhci_start, xdbc.xhci_length);
+	if (!base) {
+		xdbc_trace("failed to remap the io address\n");
+		ret = -ENOMEM;
+		goto free_and_quit;
+	}
+
+	raw_spin_lock_irqsave(&xdbc.lock, flags);
+	early_iounmap(xdbc.xhci_base, xdbc.xhci_length);
+	xdbc.xhci_base = base;
+	offset = xhci_find_next_ext_cap(xdbc.xhci_base, 0, XHCI_EXT_CAPS_DEBUG);
+	xdbc.xdbc_reg = (struct xdbc_regs __iomem *)(xdbc.xhci_base + offset);
+	raw_spin_unlock_irqrestore(&xdbc.lock, flags);
+
+	kthread_run(xdbc_scrub_function, NULL, "%s", "xdbc");
+
+	return 0;
+
+free_and_quit:
+	xdbc_free_ring(&xdbc.evt_ring);
+	xdbc_free_ring(&xdbc.out_ring);
+	xdbc_free_ring(&xdbc.in_ring);
+	memblock_phys_free(xdbc.table_dma, PAGE_SIZE);
+	memblock_phys_free(xdbc.out_dma, PAGE_SIZE);
+	writel(0, &xdbc.xdbc_reg->control);
+	early_iounmap(xdbc.xhci_base, xdbc.xhci_length);
+
+	return ret;
+}
+subsys_initcall(xdbc_init);
diff --git a/drivers/usb/early/xhci-dbc.h b/drivers/usb/early/xhci-dbc.h
new file mode 100644
index 000000000..8b4d71de4
--- /dev/null
+++ b/drivers/usb/early/xhci-dbc.h
@@ -0,0 +1,222 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * xhci-dbc.h - xHCI debug capability early driver
+ *
+ * Copyright (C) 2016 Intel Corporation
+ *
+ * Author: Lu Baolu <baolu.lu@linux.intel.com>
+ */
+
+#ifndef __LINUX_XHCI_DBC_H
+#define __LINUX_XHCI_DBC_H
+
+#include <linux/types.h>
+#include <linux/usb/ch9.h>
+
+/*
+ * xHCI Debug Capability Register interfaces:
+ */
+struct xdbc_regs {
+	__le32	capability;
+	__le32	doorbell;
+	__le32	ersts;		/* Event Ring Segment Table Size*/
+	__le32	__reserved_0;	/* 0c~0f reserved bits */
+	__le64	erstba;		/* Event Ring Segment Table Base Address */
+	__le64	erdp;		/* Event Ring Dequeue Pointer */
+	__le32	control;
+	__le32	status;
+	__le32	portsc;		/* Port status and control */
+	__le32	__reserved_1;	/* 2b~28 reserved bits */
+	__le64	dccp;		/* Debug Capability Context Pointer */
+	__le32	devinfo1;	/* Device Descriptor Info Register 1 */
+	__le32	devinfo2;	/* Device Descriptor Info Register 2 */
+};
+
+#define DEBUG_MAX_BURST(p)	(((p) >> 16) & 0xff)
+
+#define CTRL_DBC_RUN		BIT(0)
+#define CTRL_PORT_ENABLE	BIT(1)
+#define CTRL_HALT_OUT_TR	BIT(2)
+#define CTRL_HALT_IN_TR		BIT(3)
+#define CTRL_DBC_RUN_CHANGE	BIT(4)
+#define CTRL_DBC_ENABLE		BIT(31)
+
+#define DCST_DEBUG_PORT(p)	(((p) >> 24) & 0xff)
+
+#define PORTSC_CONN_STATUS	BIT(0)
+#define PORTSC_CONN_CHANGE	BIT(17)
+#define PORTSC_RESET_CHANGE	BIT(21)
+#define PORTSC_LINK_CHANGE	BIT(22)
+#define PORTSC_CONFIG_CHANGE	BIT(23)
+
+/*
+ * xHCI Debug Capability data structures:
+ */
+struct xdbc_trb {
+	__le32 field[4];
+};
+
+struct xdbc_erst_entry {
+	__le64	seg_addr;
+	__le32	seg_size;
+	__le32	__reserved_0;
+};
+
+struct xdbc_info_context {
+	__le64	string0;
+	__le64	manufacturer;
+	__le64	product;
+	__le64	serial;
+	__le32	length;
+	__le32	__reserved_0[7];
+};
+
+struct xdbc_ep_context {
+	__le32	ep_info1;
+	__le32	ep_info2;
+	__le64	deq;
+	__le32	tx_info;
+	__le32	__reserved_0[11];
+};
+
+struct xdbc_context {
+	struct xdbc_info_context	info;
+	struct xdbc_ep_context		out;
+	struct xdbc_ep_context		in;
+};
+
+#define XDBC_INFO_CONTEXT_SIZE		48
+#define XDBC_MAX_STRING_LENGTH		64
+#define XDBC_STRING_MANUFACTURER	"Linux Foundation"
+#define XDBC_STRING_PRODUCT		"Linux USB GDB Target"
+#define XDBC_STRING_SERIAL		"0001"
+
+struct xdbc_strings {
+	char	string0[XDBC_MAX_STRING_LENGTH];
+	char	manufacturer[XDBC_MAX_STRING_LENGTH];
+	char	product[XDBC_MAX_STRING_LENGTH];
+	char	serial[XDBC_MAX_STRING_LENGTH];
+};
+
+#define XDBC_PROTOCOL		1	/* GNU Remote Debug Command Set */
+#define XDBC_VENDOR_ID		0x1d6b	/* Linux Foundation 0x1d6b */
+#define XDBC_PRODUCT_ID		0x0011	/* __le16 idProduct; device 0011 */
+#define XDBC_DEVICE_REV		0x0010	/* 0.10 */
+
+/*
+ * xHCI Debug Capability software state structures:
+ */
+struct xdbc_segment {
+	struct xdbc_trb		*trbs;
+	dma_addr_t		dma;
+};
+
+#define XDBC_TRBS_PER_SEGMENT	256
+
+struct xdbc_ring {
+	struct xdbc_segment	*segment;
+	struct xdbc_trb		*enqueue;
+	struct xdbc_trb		*dequeue;
+	u32			cycle_state;
+};
+
+/*
+ * These are the "Endpoint ID" (also known as "Context Index") values for the
+ * OUT Transfer Ring and the IN Transfer Ring of a Debug Capability Context data
+ * structure.
+ * According to the "eXtensible Host Controller Interface for Universal Serial
+ * Bus (xHCI)" specification, section "7.6.3.2 Endpoint Contexts and Transfer
+ * Rings", these should be 0 and 1, and those are the values AMD machines give
+ * you; but Intel machines seem to use the formula from section "4.5.1 Device
+ * Context Index", which is supposed to be used for the Device Context only.
+ * Luckily the values from Intel don't overlap with those from AMD, so we can
+ * just test for both.
+ */
+#define XDBC_EPID_OUT		0
+#define XDBC_EPID_IN		1
+#define XDBC_EPID_OUT_INTEL	2
+#define XDBC_EPID_IN_INTEL	3
+
+struct xdbc_state {
+	u16			vendor;
+	u16			device;
+	u32			bus;
+	u32			dev;
+	u32			func;
+	void __iomem		*xhci_base;
+	u64			xhci_start;
+	size_t			xhci_length;
+	int			port_number;
+
+	/* DbC register base */
+	struct xdbc_regs __iomem *xdbc_reg;
+
+	/* DbC table page */
+	dma_addr_t		table_dma;
+	void			*table_base;
+
+	/* event ring segment table */
+	dma_addr_t		erst_dma;
+	size_t			erst_size;
+	void			*erst_base;
+
+	/* event ring segments */
+	struct xdbc_ring	evt_ring;
+	struct xdbc_segment	evt_seg;
+
+	/* debug capability contexts */
+	dma_addr_t		dbcc_dma;
+	size_t			dbcc_size;
+	void			*dbcc_base;
+
+	/* descriptor strings */
+	dma_addr_t		string_dma;
+	size_t			string_size;
+	void			*string_base;
+
+	/* bulk OUT endpoint */
+	struct xdbc_ring	out_ring;
+	struct xdbc_segment	out_seg;
+	void			*out_buf;
+	dma_addr_t		out_dma;
+
+	/* bulk IN endpoint */
+	struct xdbc_ring	in_ring;
+	struct xdbc_segment	in_seg;
+	void			*in_buf;
+	dma_addr_t		in_dma;
+
+	u32			flags;
+
+	/* spinlock for early_xdbc_write() reentrancy */
+	raw_spinlock_t		lock;
+};
+
+#define XDBC_PCI_MAX_BUSES	256
+#define XDBC_PCI_MAX_DEVICES	32
+#define XDBC_PCI_MAX_FUNCTION	8
+
+#define XDBC_TABLE_ENTRY_SIZE	64
+#define XDBC_ERST_ENTRY_NUM	1
+#define XDBC_DBCC_ENTRY_NUM	3
+#define XDBC_STRING_ENTRY_NUM	4
+
+/* Bits definitions for xdbc_state.flags: */
+#define XDBC_FLAGS_INITIALIZED	BIT(0)
+#define XDBC_FLAGS_IN_STALL	BIT(1)
+#define XDBC_FLAGS_OUT_STALL	BIT(2)
+#define XDBC_FLAGS_IN_PROCESS	BIT(3)
+#define XDBC_FLAGS_OUT_PROCESS	BIT(4)
+#define XDBC_FLAGS_CONFIGURED	BIT(5)
+
+#define XDBC_MAX_PACKET		1024
+
+/* Door bell target: */
+#define OUT_EP_DOORBELL		0
+#define IN_EP_DOORBELL		1
+#define DOOR_BELL_TARGET(p)	(((p) & 0xff) << 8)
+
+#define xdbc_read64(regs)	xhci_read_64(NULL, (regs))
+#define xdbc_write64(val, regs)	xhci_write_64(NULL, (val), (regs))
+
+#endif /* __LINUX_XHCI_DBC_H */
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
new file mode 100644
index 000000000..4fa2ddf32
--- /dev/null
+++ b/drivers/usb/gadget/Kconfig
@@ -0,0 +1,491 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Gadget support on a system involves
+#    (a) a peripheral controller, and
+#    (b) the gadget driver using it.
+#
+# NOTE:  Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
+#
+#  - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
+#  - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
+#  - Some systems have both kinds of controllers.
+#
+# With help from a special transceiver and a "Mini-AB" jack, systems with
+# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
+#
+
+menuconfig USB_GADGET
+	tristate "USB Gadget Support"
+	select USB_COMMON
+	select NLS
+	help
+	   USB is a host/device protocol, organized with one host (such as a
+	   PC) controlling up to 127 peripheral devices.
+	   The USB hardware is asymmetric, which makes it easier to set up:
+	   you can't connect a "to-the-host" connector to a peripheral.
+
+	   Linux can run in the host, or in the peripheral.  In both cases
+	   you need a low level bus controller driver, and some software
+	   talking to it.  Peripheral controllers are often discrete silicon,
+	   or are integrated with the CPU in a microcontroller.  The more
+	   familiar host side controllers have names like "EHCI", "OHCI",
+	   or "UHCI", and are usually integrated into southbridges on PC
+	   motherboards.
+
+	   Enable this configuration option if you want to run Linux inside
+	   a USB peripheral device.  Configure one hardware driver for your
+	   peripheral/device side bus controller, and a "gadget driver" for
+	   your peripheral protocol.  (If you use modular gadget drivers,
+	   you may configure more than one.)
+
+	   If in doubt, say "N" and don't enable these drivers; most people
+	   don't have this kind of hardware (except maybe inside Linux PDAs).
+
+	   For more information, see <http://www.linux-usb.org/gadget> and
+	   the kernel documentation for this API.
+
+if USB_GADGET
+
+config USB_GADGET_DEBUG
+	bool "Debugging messages (DEVELOPMENT)"
+	depends on DEBUG_KERNEL
+	help
+	   Many controller and gadget drivers will print some debugging
+	   messages if you use this option to ask for those messages.
+
+	   Avoid enabling these messages, even if you're actively
+	   debugging such a driver.  Many drivers will emit so many
+	   messages that the driver timings are affected, which will
+	   either create new failure modes or remove the one you're
+	   trying to track down.  Never enable these messages for a
+	   production build.
+
+config USB_GADGET_VERBOSE
+	bool "Verbose debugging Messages (DEVELOPMENT)"
+	depends on USB_GADGET_DEBUG
+	help
+	   Many controller and gadget drivers will print verbose debugging
+	   messages if you use this option to ask for those messages.
+
+	   Avoid enabling these messages, even if you're actively
+	   debugging such a driver.  Many drivers will emit so many
+	   messages that the driver timings are affected, which will
+	   either create new failure modes or remove the one you're
+	   trying to track down.  Never enable these messages for a
+	   production build.
+
+config USB_GADGET_DEBUG_FILES
+	bool "Debugging information files (DEVELOPMENT)"
+	depends on PROC_FS
+	help
+	   Some of the drivers in the "gadget" framework can expose
+	   debugging information in files such as /proc/driver/udc
+	   (for a peripheral controller).  The information in these
+	   files may help when you're troubleshooting or bringing up a
+	   driver on a new board.   Enable these files by choosing "Y"
+	   here.  If in doubt, or to conserve kernel memory, say "N".
+
+config USB_GADGET_DEBUG_FS
+	bool "Debugging information files in debugfs (DEVELOPMENT)"
+	depends on DEBUG_FS
+	help
+	   Some of the drivers in the "gadget" framework can expose
+	   debugging information in files under /sys/kernel/debug/.
+	   The information in these files may help when you're
+	   troubleshooting or bringing up a driver on a new board.
+	   Enable these files by choosing "Y" here.  If in doubt, or
+	   to conserve kernel memory, say "N".
+
+config USB_GADGET_VBUS_DRAW
+	int "Maximum VBUS Power usage (2-500 mA)"
+	range 2 500
+	default 2
+	help
+	   Some devices need to draw power from USB when they are
+	   configured, perhaps to operate circuitry or to recharge
+	   batteries.  This is in addition to any local power supply,
+	   such as an AC adapter or batteries.
+
+	   Enter the maximum power your device draws through USB, in
+	   milliAmperes.  The permitted range of values is 2 - 500 mA;
+	   0 mA would be legal, but can make some hosts misbehave.
+
+	   This value will be used except for system-specific gadget
+	   drivers that have more specific information.
+
+config USB_GADGET_STORAGE_NUM_BUFFERS
+	int "Number of storage pipeline buffers"
+	range 2 256
+	default 2
+	help
+	   Usually 2 buffers are enough to establish a good buffering
+	   pipeline. The number may be increased in order to compensate
+	   for a bursty VFS behaviour. For instance there may be CPU wake up
+	   latencies that makes the VFS to appear bursty in a system with
+	   an CPU on-demand governor. Especially if DMA is doing IO to
+	   offload the CPU. In this case the CPU will go into power
+	   save often and spin up occasionally to move data within VFS.
+	   If selecting USB_GADGET_DEBUG_FILES this value may be set by
+	   a module parameter as well.
+	   If unsure, say 2.
+
+config U_SERIAL_CONSOLE
+	bool "Serial gadget console support"
+	depends on USB_U_SERIAL
+	help
+	   It supports the serial gadget can be used as a console.
+
+source "drivers/usb/gadget/udc/Kconfig"
+
+#
+# USB Gadget Drivers
+#
+
+# composite based drivers
+config USB_LIBCOMPOSITE
+	tristate
+	select CONFIGFS_FS
+	depends on USB_GADGET
+
+config USB_F_ACM
+	tristate
+
+config USB_F_SS_LB
+	tristate
+
+config USB_U_SERIAL
+	tristate
+
+config USB_U_ETHER
+	tristate
+
+config USB_U_AUDIO
+	tristate
+
+config USB_F_SERIAL
+	tristate
+
+config USB_F_OBEX
+	tristate
+
+config USB_F_NCM
+	tristate
+
+config USB_F_ECM
+	tristate
+
+config USB_F_PHONET
+	tristate
+
+config USB_F_EEM
+	tristate
+
+config USB_F_SUBSET
+	tristate
+
+config USB_F_RNDIS
+	tristate
+
+config USB_F_MASS_STORAGE
+	tristate
+
+config USB_F_FS
+	tristate
+
+config USB_F_UAC1
+	tristate
+
+config USB_F_UAC1_LEGACY
+	tristate
+
+config USB_F_UAC2
+	tristate
+
+config USB_F_UVC
+	tristate
+
+config USB_F_MIDI
+	tristate
+
+config USB_F_HID
+	tristate
+
+config USB_F_PRINTER
+	tristate
+
+config USB_F_TCM
+	tristate
+
+# this first set of drivers all depend on bulk-capable hardware.
+
+config USB_CONFIGFS
+	tristate "USB Gadget functions configurable through configfs"
+	select USB_LIBCOMPOSITE
+	help
+	  A Linux USB "gadget" can be set up through configfs.
+	  If this is the case, the USB functions (which from the host's
+	  perspective are seen as interfaces) and configurations are
+	  specified simply by creating appropriate directories in configfs.
+	  Associating functions with configurations is done by creating
+	  appropriate symbolic links.
+	  For more information see Documentation/usb/gadget_configfs.rst.
+
+config USB_CONFIGFS_SERIAL
+	bool "Generic serial bulk in/out"
+	depends on USB_CONFIGFS
+	depends on TTY
+	select USB_U_SERIAL
+	select USB_F_SERIAL
+	help
+	  The function talks to the Linux-USB generic serial driver.
+
+config USB_CONFIGFS_ACM
+	bool "Abstract Control Model (CDC ACM)"
+	depends on USB_CONFIGFS
+	depends on TTY
+	select USB_U_SERIAL
+	select USB_F_ACM
+	help
+	  ACM serial link.  This function can be used to interoperate with
+	  MS-Windows hosts or with the Linux-USB "cdc-acm" driver.
+
+config USB_CONFIGFS_OBEX
+	bool "Object Exchange Model (CDC OBEX)"
+	depends on USB_CONFIGFS
+	depends on TTY
+	select USB_U_SERIAL
+	select USB_F_OBEX
+	help
+	  You will need a user space OBEX server talking to /dev/ttyGS*,
+	  since the kernel itself doesn't implement the OBEX protocol.
+
+config USB_CONFIGFS_NCM
+	bool "Network Control Model (CDC NCM)"
+	depends on USB_CONFIGFS
+	depends on NET
+	select USB_U_ETHER
+	select USB_F_NCM
+	select CRC32
+	help
+	  NCM is an advanced protocol for Ethernet encapsulation, allows
+	  grouping of several ethernet frames into one USB transfer and
+	  different alignment possibilities.
+
+config USB_CONFIGFS_ECM
+	bool "Ethernet Control Model (CDC ECM)"
+	depends on USB_CONFIGFS
+	depends on NET
+	select USB_U_ETHER
+	select USB_F_ECM
+	help
+	  The "Communication Device Class" (CDC) Ethernet Control Model.
+	  That protocol is often avoided with pure Ethernet adapters, in
+	  favor of simpler vendor-specific hardware, but is widely
+	  supported by firmware for smart network devices.
+
+config USB_CONFIGFS_ECM_SUBSET
+	bool "Ethernet Control Model (CDC ECM) subset"
+	depends on USB_CONFIGFS
+	depends on NET
+	select USB_U_ETHER
+	select USB_F_SUBSET
+	help
+	  On hardware that can't implement the full protocol,
+	  a simple CDC subset is used, placing fewer demands on USB.
+
+config USB_CONFIGFS_RNDIS
+	bool "RNDIS"
+	depends on USB_CONFIGFS
+	depends on NET
+	select USB_U_ETHER
+	select USB_F_RNDIS
+	help
+	   Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
+	   and Microsoft provides redistributable binary RNDIS drivers for
+	   older versions of Windows.
+
+	   To make MS-Windows work with this, use Documentation/usb/linux.inf
+	   as the "driver info file".  For versions of MS-Windows older than
+	   XP, you'll need to download drivers from Microsoft's website; a URL
+	   is given in comments found in that info file.
+
+config USB_CONFIGFS_EEM
+	bool "Ethernet Emulation Model (EEM)"
+	depends on USB_CONFIGFS
+	depends on NET
+	select USB_U_ETHER
+	select USB_F_EEM
+	select CRC32
+	help
+	  CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
+	  and therefore can be supported by more hardware.  Technically ECM and
+	  EEM are designed for different applications.  The ECM model extends
+	  the network interface to the target (e.g. a USB cable modem), and the
+	  EEM model is for mobile devices to communicate with hosts using
+	  ethernet over USB.  For Linux gadgets, however, the interface with
+	  the host is the same (a usbX device), so the differences are minimal.
+
+config USB_CONFIGFS_PHONET
+	bool "Phonet protocol"
+	depends on USB_CONFIGFS
+	depends on NET
+	depends on PHONET
+	select USB_U_ETHER
+	select USB_F_PHONET
+	help
+	  The Phonet protocol implementation for USB device.
+
+config USB_CONFIGFS_MASS_STORAGE
+	bool "Mass storage"
+	depends on USB_CONFIGFS
+	depends on BLOCK
+	select USB_F_MASS_STORAGE
+	help
+	  The Mass Storage Gadget acts as a USB Mass Storage disk drive.
+	  As its storage repository it can use a regular file or a block
+	  device (in much the same way as the "loop" device driver),
+	  specified as a module parameter or sysfs option.
+
+config USB_CONFIGFS_F_LB_SS
+	bool "Loopback and sourcesink function (for testing)"
+	depends on USB_CONFIGFS
+	select USB_F_SS_LB
+	help
+	  Loopback function loops back a configurable number of transfers.
+	  Sourcesink function either sinks and sources bulk data.
+	  It also implements control requests, for "chapter 9" conformance.
+	  Make this be the first driver you try using on top of any new
+	  USB peripheral controller driver.  Then you can use host-side
+	  test software, like the "usbtest" driver, to put your hardware
+	  and its driver through a basic set of functional tests.
+
+config USB_CONFIGFS_F_FS
+	bool "Function filesystem (FunctionFS)"
+	depends on USB_CONFIGFS
+	select USB_F_FS
+	help
+	  The Function Filesystem (FunctionFS) lets one create USB
+	  composite functions in user space in the same way GadgetFS
+	  lets one create USB gadgets in user space.  This allows creation
+	  of composite gadgets such that some of the functions are
+	  implemented in kernel space (for instance Ethernet, serial or
+	  mass storage) and other are implemented in user space.
+
+config USB_CONFIGFS_F_UAC1
+	bool "Audio Class 1.0"
+	depends on USB_CONFIGFS
+	depends on SND
+	select USB_LIBCOMPOSITE
+	select SND_PCM
+	select USB_U_AUDIO
+	select USB_F_UAC1
+	help
+	  This Audio function implements 1 AudioControl interface,
+	  1 AudioStreaming Interface each for USB-OUT and USB-IN.
+	  This driver doesn't expect any real Audio codec to be present
+	  on the device - the audio streams are simply sinked to and
+	  sourced from a virtual ALSA sound card created. The user-space
+	  application may choose to do whatever it wants with the data
+	  received from the USB Host and choose to provide whatever it
+	  wants as audio data to the USB Host.
+
+config USB_CONFIGFS_F_UAC1_LEGACY
+	bool "Audio Class 1.0 (legacy implementation)"
+	depends on USB_CONFIGFS
+	depends on SND
+	select USB_LIBCOMPOSITE
+	select SND_PCM
+	select USB_F_UAC1_LEGACY
+	help
+	  This Audio function implements 1 AudioControl interface,
+	  1 AudioStreaming Interface each for USB-OUT and USB-IN.
+	  This is a legacy driver and requires a real Audio codec
+	  to be present on the device.
+
+config USB_CONFIGFS_F_UAC2
+	bool "Audio Class 2.0"
+	depends on USB_CONFIGFS
+	depends on SND
+	select USB_LIBCOMPOSITE
+	select SND_PCM
+	select USB_U_AUDIO
+	select USB_F_UAC2
+	help
+	  This Audio function is compatible with USB Audio Class
+	  specification 2.0. It implements 1 AudioControl interface,
+	  1 AudioStreaming Interface each for USB-OUT and USB-IN.
+	  This driver doesn't expect any real Audio codec to be present
+	  on the device - the audio streams are simply sinked to and
+	  sourced from a virtual ALSA sound card created. The user-space
+	  application may choose to do whatever it wants with the data
+	  received from the USB Host and choose to provide whatever it
+	  wants as audio data to the USB Host.
+
+config USB_CONFIGFS_F_MIDI
+	bool "MIDI function"
+	depends on USB_CONFIGFS
+	depends on SND
+	select USB_LIBCOMPOSITE
+	select SND_RAWMIDI
+	select USB_F_MIDI
+	help
+	  The MIDI Function acts as a USB Audio device, with one MIDI
+	  input and one MIDI output. These MIDI jacks appear as
+	  a sound "card" in the ALSA sound system. Other MIDI
+	  connections can then be made on the gadget system, using
+	  ALSA's aconnect utility etc.
+
+config USB_CONFIGFS_F_HID
+	bool "HID function"
+	depends on USB_CONFIGFS
+	select USB_F_HID
+	help
+	  The HID function driver provides generic emulation of USB
+	  Human Interface Devices (HID).
+
+	  For more information, see Documentation/usb/gadget_hid.rst.
+
+config USB_CONFIGFS_F_UVC
+	bool "USB Webcam function"
+	depends on USB_CONFIGFS
+	depends on VIDEO_DEV
+	depends on VIDEO_DEV
+	select VIDEOBUF2_DMA_SG
+	select VIDEOBUF2_VMALLOC
+	select USB_F_UVC
+	help
+	  The Webcam function acts as a composite USB Audio and Video Class
+	  device. It provides a userspace API to process UVC control requests
+	  and stream video data to the host.
+
+config USB_CONFIGFS_F_PRINTER
+	bool "Printer function"
+	select USB_F_PRINTER
+	depends on USB_CONFIGFS
+	help
+	  The Printer function channels data between the USB host and a
+	  userspace program driving the print engine. The user space
+	  program reads and writes the device file /dev/g_printer<X> to
+	  receive or send printer data. It can use ioctl calls to
+	  the device file to get or set printer status.
+
+	  For more information, see Documentation/usb/gadget_printer.rst
+	  which includes sample code for accessing the device file.
+
+config USB_CONFIGFS_F_TCM
+	bool "USB Gadget Target Fabric"
+	depends on TARGET_CORE
+	depends on USB_CONFIGFS
+	select USB_LIBCOMPOSITE
+	select USB_F_TCM
+	help
+	  This fabric is a USB gadget component. Two USB protocols are
+	  supported that is BBB or BOT (Bulk Only Transport) and UAS
+	  (USB Attached SCSI). BOT is advertised on alternative
+	  interface 0 (primary) and UAS is on alternative interface 1.
+	  Both protocols can work on USB2.0 and USB3.0.
+	  UAS utilizes the USB 3.0 feature called streams support.
+
+source "drivers/usb/gadget/legacy/Kconfig"
+
+endif # USB_GADGET
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
new file mode 100644
index 000000000..33f1ef91b
--- /dev/null
+++ b/drivers/usb/gadget/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB peripheral controller drivers
+#
+subdir-ccflags-$(CONFIG_USB_GADGET_DEBUG)	:= -DDEBUG
+subdir-ccflags-$(CONFIG_USB_GADGET_VERBOSE)	+= -DVERBOSE_DEBUG
+
+obj-$(CONFIG_USB_LIBCOMPOSITE)	+= libcomposite.o
+libcomposite-y			:= usbstring.o config.o epautoconf.o
+libcomposite-y			+= composite.o functions.o configfs.o u_f.o
+
+obj-$(CONFIG_USB_GADGET)	+= udc/ function/ legacy/
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
new file mode 100644
index 000000000..cb0a4e2cd
--- /dev/null
+++ b/drivers/usb/gadget/composite.c
@@ -0,0 +1,2611 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * composite.c - infrastructure for Composite USB Gadgets
+ *
+ * Copyright (C) 2006-2008 David Brownell
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kallsyms.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/utsname.h>
+#include <linux/bitfield.h>
+
+#include <linux/usb/composite.h>
+#include <linux/usb/otg.h>
+#include <asm/unaligned.h>
+
+#include "u_os_desc.h"
+
+/**
+ * struct usb_os_string - represents OS String to be reported by a gadget
+ * @bLength: total length of the entire descritor, always 0x12
+ * @bDescriptorType: USB_DT_STRING
+ * @qwSignature: the OS String proper
+ * @bMS_VendorCode: code used by the host for subsequent requests
+ * @bPad: not used, must be zero
+ */
+struct usb_os_string {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	qwSignature[OS_STRING_QW_SIGN_LEN];
+	__u8	bMS_VendorCode;
+	__u8	bPad;
+} __packed;
+
+/*
+ * The code in this file is utility code, used to build a gadget driver
+ * from one or more "function" drivers, one or more "configuration"
+ * objects, and a "usb_composite_driver" by gluing them together along
+ * with the relevant device-wide data.
+ */
+
+static struct usb_gadget_strings **get_containers_gs(
+		struct usb_gadget_string_container *uc)
+{
+	return (struct usb_gadget_strings **)uc->stash;
+}
+
+/**
+ * function_descriptors() - get function descriptors for speed
+ * @f: the function
+ * @speed: the speed
+ *
+ * Returns the descriptors or NULL if not set.
+ */
+static struct usb_descriptor_header **
+function_descriptors(struct usb_function *f,
+		     enum usb_device_speed speed)
+{
+	struct usb_descriptor_header **descriptors;
+
+	/*
+	 * NOTE: we try to help gadget drivers which might not be setting
+	 * max_speed appropriately.
+	 */
+
+	switch (speed) {
+	case USB_SPEED_SUPER_PLUS:
+		descriptors = f->ssp_descriptors;
+		if (descriptors)
+			break;
+		fallthrough;
+	case USB_SPEED_SUPER:
+		descriptors = f->ss_descriptors;
+		if (descriptors)
+			break;
+		fallthrough;
+	case USB_SPEED_HIGH:
+		descriptors = f->hs_descriptors;
+		if (descriptors)
+			break;
+		fallthrough;
+	default:
+		descriptors = f->fs_descriptors;
+	}
+
+	/*
+	 * if we can't find any descriptors at all, then this gadget deserves to
+	 * Oops with a NULL pointer dereference
+	 */
+
+	return descriptors;
+}
+
+/**
+ * next_desc() - advance to the next desc_type descriptor
+ * @t: currect pointer within descriptor array
+ * @desc_type: descriptor type
+ *
+ * Return: next desc_type descriptor or NULL
+ *
+ * Iterate over @t until either desc_type descriptor found or
+ * NULL (that indicates end of list) encountered
+ */
+static struct usb_descriptor_header**
+next_desc(struct usb_descriptor_header **t, u8 desc_type)
+{
+	for (; *t; t++) {
+		if ((*t)->bDescriptorType == desc_type)
+			return t;
+	}
+	return NULL;
+}
+
+/*
+ * for_each_desc() - iterate over desc_type descriptors in the
+ * descriptors list
+ * @start: pointer within descriptor array.
+ * @iter_desc: desc_type descriptor to use as the loop cursor
+ * @desc_type: wanted descriptr type
+ */
+#define for_each_desc(start, iter_desc, desc_type) \
+	for (iter_desc = next_desc(start, desc_type); \
+	     iter_desc; iter_desc = next_desc(iter_desc + 1, desc_type))
+
+/**
+ * config_ep_by_speed_and_alt() - configures the given endpoint
+ * according to gadget speed.
+ * @g: pointer to the gadget
+ * @f: usb function
+ * @_ep: the endpoint to configure
+ * @alt: alternate setting number
+ *
+ * Return: error code, 0 on success
+ *
+ * This function chooses the right descriptors for a given
+ * endpoint according to gadget speed and saves it in the
+ * endpoint desc field. If the endpoint already has a descriptor
+ * assigned to it - overwrites it with currently corresponding
+ * descriptor. The endpoint maxpacket field is updated according
+ * to the chosen descriptor.
+ * Note: the supplied function should hold all the descriptors
+ * for supported speeds
+ */
+int config_ep_by_speed_and_alt(struct usb_gadget *g,
+				struct usb_function *f,
+				struct usb_ep *_ep,
+				u8 alt)
+{
+	struct usb_endpoint_descriptor *chosen_desc = NULL;
+	struct usb_interface_descriptor *int_desc = NULL;
+	struct usb_descriptor_header **speed_desc = NULL;
+
+	struct usb_ss_ep_comp_descriptor *comp_desc = NULL;
+	int want_comp_desc = 0;
+
+	struct usb_descriptor_header **d_spd; /* cursor for speed desc */
+	struct usb_composite_dev *cdev;
+	bool incomplete_desc = false;
+
+	if (!g || !f || !_ep)
+		return -EIO;
+
+	/* select desired speed */
+	switch (g->speed) {
+	case USB_SPEED_SUPER_PLUS:
+		if (gadget_is_superspeed_plus(g)) {
+			if (f->ssp_descriptors) {
+				speed_desc = f->ssp_descriptors;
+				want_comp_desc = 1;
+				break;
+			}
+			incomplete_desc = true;
+		}
+		fallthrough;
+	case USB_SPEED_SUPER:
+		if (gadget_is_superspeed(g)) {
+			if (f->ss_descriptors) {
+				speed_desc = f->ss_descriptors;
+				want_comp_desc = 1;
+				break;
+			}
+			incomplete_desc = true;
+		}
+		fallthrough;
+	case USB_SPEED_HIGH:
+		if (gadget_is_dualspeed(g)) {
+			if (f->hs_descriptors) {
+				speed_desc = f->hs_descriptors;
+				break;
+			}
+			incomplete_desc = true;
+		}
+		fallthrough;
+	default:
+		speed_desc = f->fs_descriptors;
+	}
+
+	cdev = get_gadget_data(g);
+	if (incomplete_desc)
+		WARNING(cdev,
+			"%s doesn't hold the descriptors for current speed\n",
+			f->name);
+
+	/* find correct alternate setting descriptor */
+	for_each_desc(speed_desc, d_spd, USB_DT_INTERFACE) {
+		int_desc = (struct usb_interface_descriptor *)*d_spd;
+
+		if (int_desc->bAlternateSetting == alt) {
+			speed_desc = d_spd;
+			goto intf_found;
+		}
+	}
+	return -EIO;
+
+intf_found:
+	/* find descriptors */
+	for_each_desc(speed_desc, d_spd, USB_DT_ENDPOINT) {
+		chosen_desc = (struct usb_endpoint_descriptor *)*d_spd;
+		if (chosen_desc->bEndpointAddress == _ep->address)
+			goto ep_found;
+	}
+	return -EIO;
+
+ep_found:
+	/* commit results */
+	_ep->maxpacket = usb_endpoint_maxp(chosen_desc);
+	_ep->desc = chosen_desc;
+	_ep->comp_desc = NULL;
+	_ep->maxburst = 0;
+	_ep->mult = 1;
+
+	if (g->speed == USB_SPEED_HIGH && (usb_endpoint_xfer_isoc(_ep->desc) ||
+				usb_endpoint_xfer_int(_ep->desc)))
+		_ep->mult = usb_endpoint_maxp_mult(_ep->desc);
+
+	if (!want_comp_desc)
+		return 0;
+
+	/*
+	 * Companion descriptor should follow EP descriptor
+	 * USB 3.0 spec, #9.6.7
+	 */
+	comp_desc = (struct usb_ss_ep_comp_descriptor *)*(++d_spd);
+	if (!comp_desc ||
+	    (comp_desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP))
+		return -EIO;
+	_ep->comp_desc = comp_desc;
+	if (g->speed >= USB_SPEED_SUPER) {
+		switch (usb_endpoint_type(_ep->desc)) {
+		case USB_ENDPOINT_XFER_ISOC:
+			/* mult: bits 1:0 of bmAttributes */
+			_ep->mult = (comp_desc->bmAttributes & 0x3) + 1;
+			fallthrough;
+		case USB_ENDPOINT_XFER_BULK:
+		case USB_ENDPOINT_XFER_INT:
+			_ep->maxburst = comp_desc->bMaxBurst + 1;
+			break;
+		default:
+			if (comp_desc->bMaxBurst != 0)
+				ERROR(cdev, "ep0 bMaxBurst must be 0\n");
+			_ep->maxburst = 1;
+			break;
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(config_ep_by_speed_and_alt);
+
+/**
+ * config_ep_by_speed() - configures the given endpoint
+ * according to gadget speed.
+ * @g: pointer to the gadget
+ * @f: usb function
+ * @_ep: the endpoint to configure
+ *
+ * Return: error code, 0 on success
+ *
+ * This function chooses the right descriptors for a given
+ * endpoint according to gadget speed and saves it in the
+ * endpoint desc field. If the endpoint already has a descriptor
+ * assigned to it - overwrites it with currently corresponding
+ * descriptor. The endpoint maxpacket field is updated according
+ * to the chosen descriptor.
+ * Note: the supplied function should hold all the descriptors
+ * for supported speeds
+ */
+int config_ep_by_speed(struct usb_gadget *g,
+			struct usb_function *f,
+			struct usb_ep *_ep)
+{
+	return config_ep_by_speed_and_alt(g, f, _ep, 0);
+}
+EXPORT_SYMBOL_GPL(config_ep_by_speed);
+
+/**
+ * usb_add_function() - add a function to a configuration
+ * @config: the configuration
+ * @function: the function being added
+ * Context: single threaded during gadget setup
+ *
+ * After initialization, each configuration must have one or more
+ * functions added to it.  Adding a function involves calling its @bind()
+ * method to allocate resources such as interface and string identifiers
+ * and endpoints.
+ *
+ * This function returns the value of the function's bind(), which is
+ * zero for success else a negative errno value.
+ */
+int usb_add_function(struct usb_configuration *config,
+		struct usb_function *function)
+{
+	int	value = -EINVAL;
+
+	DBG(config->cdev, "adding '%s'/%p to config '%s'/%p\n",
+			function->name, function,
+			config->label, config);
+
+	if (!function->set_alt || !function->disable)
+		goto done;
+
+	function->config = config;
+	list_add_tail(&function->list, &config->functions);
+
+	if (function->bind_deactivated) {
+		value = usb_function_deactivate(function);
+		if (value)
+			goto done;
+	}
+
+	/* REVISIT *require* function->bind? */
+	if (function->bind) {
+		value = function->bind(config, function);
+		if (value < 0) {
+			list_del(&function->list);
+			function->config = NULL;
+		}
+	} else
+		value = 0;
+
+	/* We allow configurations that don't work at both speeds.
+	 * If we run into a lowspeed Linux system, treat it the same
+	 * as full speed ... it's the function drivers that will need
+	 * to avoid bulk and ISO transfers.
+	 */
+	if (!config->fullspeed && function->fs_descriptors)
+		config->fullspeed = true;
+	if (!config->highspeed && function->hs_descriptors)
+		config->highspeed = true;
+	if (!config->superspeed && function->ss_descriptors)
+		config->superspeed = true;
+	if (!config->superspeed_plus && function->ssp_descriptors)
+		config->superspeed_plus = true;
+
+done:
+	if (value)
+		DBG(config->cdev, "adding '%s'/%p --> %d\n",
+				function->name, function, value);
+	return value;
+}
+EXPORT_SYMBOL_GPL(usb_add_function);
+
+void usb_remove_function(struct usb_configuration *c, struct usb_function *f)
+{
+	if (f->disable)
+		f->disable(f);
+
+	bitmap_zero(f->endpoints, 32);
+	list_del(&f->list);
+	if (f->unbind)
+		f->unbind(c, f);
+
+	if (f->bind_deactivated)
+		usb_function_activate(f);
+}
+EXPORT_SYMBOL_GPL(usb_remove_function);
+
+/**
+ * usb_function_deactivate - prevent function and gadget enumeration
+ * @function: the function that isn't yet ready to respond
+ *
+ * Blocks response of the gadget driver to host enumeration by
+ * preventing the data line pullup from being activated.  This is
+ * normally called during @bind() processing to change from the
+ * initial "ready to respond" state, or when a required resource
+ * becomes available.
+ *
+ * For example, drivers that serve as a passthrough to a userspace
+ * daemon can block enumeration unless that daemon (such as an OBEX,
+ * MTP, or print server) is ready to handle host requests.
+ *
+ * Not all systems support software control of their USB peripheral
+ * data pullups.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_function_deactivate(struct usb_function *function)
+{
+	struct usb_composite_dev	*cdev = function->config->cdev;
+	unsigned long			flags;
+	int				status = 0;
+
+	spin_lock_irqsave(&cdev->lock, flags);
+
+	if (cdev->deactivations == 0) {
+		spin_unlock_irqrestore(&cdev->lock, flags);
+		status = usb_gadget_deactivate(cdev->gadget);
+		spin_lock_irqsave(&cdev->lock, flags);
+	}
+	if (status == 0)
+		cdev->deactivations++;
+
+	spin_unlock_irqrestore(&cdev->lock, flags);
+	return status;
+}
+EXPORT_SYMBOL_GPL(usb_function_deactivate);
+
+/**
+ * usb_function_activate - allow function and gadget enumeration
+ * @function: function on which usb_function_activate() was called
+ *
+ * Reverses effect of usb_function_deactivate().  If no more functions
+ * are delaying their activation, the gadget driver will respond to
+ * host enumeration procedures.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_function_activate(struct usb_function *function)
+{
+	struct usb_composite_dev	*cdev = function->config->cdev;
+	unsigned long			flags;
+	int				status = 0;
+
+	spin_lock_irqsave(&cdev->lock, flags);
+
+	if (WARN_ON(cdev->deactivations == 0))
+		status = -EINVAL;
+	else {
+		cdev->deactivations--;
+		if (cdev->deactivations == 0) {
+			spin_unlock_irqrestore(&cdev->lock, flags);
+			status = usb_gadget_activate(cdev->gadget);
+			spin_lock_irqsave(&cdev->lock, flags);
+		}
+	}
+
+	spin_unlock_irqrestore(&cdev->lock, flags);
+	return status;
+}
+EXPORT_SYMBOL_GPL(usb_function_activate);
+
+/**
+ * usb_interface_id() - allocate an unused interface ID
+ * @config: configuration associated with the interface
+ * @function: function handling the interface
+ * Context: single threaded during gadget setup
+ *
+ * usb_interface_id() is called from usb_function.bind() callbacks to
+ * allocate new interface IDs.  The function driver will then store that
+ * ID in interface, association, CDC union, and other descriptors.  It
+ * will also handle any control requests targeted at that interface,
+ * particularly changing its altsetting via set_alt().  There may
+ * also be class-specific or vendor-specific requests to handle.
+ *
+ * All interface identifier should be allocated using this routine, to
+ * ensure that for example different functions don't wrongly assign
+ * different meanings to the same identifier.  Note that since interface
+ * identifiers are configuration-specific, functions used in more than
+ * one configuration (or more than once in a given configuration) need
+ * multiple versions of the relevant descriptors.
+ *
+ * Returns the interface ID which was allocated; or -ENODEV if no
+ * more interface IDs can be allocated.
+ */
+int usb_interface_id(struct usb_configuration *config,
+		struct usb_function *function)
+{
+	unsigned id = config->next_interface_id;
+
+	if (id < MAX_CONFIG_INTERFACES) {
+		config->interface[id] = function;
+		config->next_interface_id = id + 1;
+		return id;
+	}
+	return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(usb_interface_id);
+
+static u8 encode_bMaxPower(enum usb_device_speed speed,
+		struct usb_configuration *c)
+{
+	unsigned val;
+
+	if (c->MaxPower || (c->bmAttributes & USB_CONFIG_ATT_SELFPOWER))
+		val = c->MaxPower;
+	else
+		val = CONFIG_USB_GADGET_VBUS_DRAW;
+	if (!val)
+		return 0;
+	if (speed < USB_SPEED_SUPER)
+		return min(val, 500U) / 2;
+	else
+		/*
+		 * USB 3.x supports up to 900mA, but since 900 isn't divisible
+		 * by 8 the integral division will effectively cap to 896mA.
+		 */
+		return min(val, 900U) / 8;
+}
+
+static int config_buf(struct usb_configuration *config,
+		enum usb_device_speed speed, void *buf, u8 type)
+{
+	struct usb_config_descriptor	*c = buf;
+	void				*next = buf + USB_DT_CONFIG_SIZE;
+	int				len;
+	struct usb_function		*f;
+	int				status;
+
+	len = USB_COMP_EP0_BUFSIZ - USB_DT_CONFIG_SIZE;
+	/* write the config descriptor */
+	c = buf;
+	c->bLength = USB_DT_CONFIG_SIZE;
+	c->bDescriptorType = type;
+	/* wTotalLength is written later */
+	c->bNumInterfaces = config->next_interface_id;
+	c->bConfigurationValue = config->bConfigurationValue;
+	c->iConfiguration = config->iConfiguration;
+	c->bmAttributes = USB_CONFIG_ATT_ONE | config->bmAttributes;
+	c->bMaxPower = encode_bMaxPower(speed, config);
+
+	/* There may be e.g. OTG descriptors */
+	if (config->descriptors) {
+		status = usb_descriptor_fillbuf(next, len,
+				config->descriptors);
+		if (status < 0)
+			return status;
+		len -= status;
+		next += status;
+	}
+
+	/* add each function's descriptors */
+	list_for_each_entry(f, &config->functions, list) {
+		struct usb_descriptor_header **descriptors;
+
+		descriptors = function_descriptors(f, speed);
+		if (!descriptors)
+			continue;
+		status = usb_descriptor_fillbuf(next, len,
+			(const struct usb_descriptor_header **) descriptors);
+		if (status < 0)
+			return status;
+		len -= status;
+		next += status;
+	}
+
+	len = next - buf;
+	c->wTotalLength = cpu_to_le16(len);
+	return len;
+}
+
+static int config_desc(struct usb_composite_dev *cdev, unsigned w_value)
+{
+	struct usb_gadget		*gadget = cdev->gadget;
+	struct usb_configuration	*c;
+	struct list_head		*pos;
+	u8				type = w_value >> 8;
+	enum usb_device_speed		speed = USB_SPEED_UNKNOWN;
+
+	if (gadget->speed >= USB_SPEED_SUPER)
+		speed = gadget->speed;
+	else if (gadget_is_dualspeed(gadget)) {
+		int	hs = 0;
+		if (gadget->speed == USB_SPEED_HIGH)
+			hs = 1;
+		if (type == USB_DT_OTHER_SPEED_CONFIG)
+			hs = !hs;
+		if (hs)
+			speed = USB_SPEED_HIGH;
+
+	}
+
+	/* This is a lookup by config *INDEX* */
+	w_value &= 0xff;
+
+	pos = &cdev->configs;
+	c = cdev->os_desc_config;
+	if (c)
+		goto check_config;
+
+	while ((pos = pos->next) !=  &cdev->configs) {
+		c = list_entry(pos, typeof(*c), list);
+
+		/* skip OS Descriptors config which is handled separately */
+		if (c == cdev->os_desc_config)
+			continue;
+
+check_config:
+		/* ignore configs that won't work at this speed */
+		switch (speed) {
+		case USB_SPEED_SUPER_PLUS:
+			if (!c->superspeed_plus)
+				continue;
+			break;
+		case USB_SPEED_SUPER:
+			if (!c->superspeed)
+				continue;
+			break;
+		case USB_SPEED_HIGH:
+			if (!c->highspeed)
+				continue;
+			break;
+		default:
+			if (!c->fullspeed)
+				continue;
+		}
+
+		if (w_value == 0)
+			return config_buf(c, speed, cdev->req->buf, type);
+		w_value--;
+	}
+	return -EINVAL;
+}
+
+static int count_configs(struct usb_composite_dev *cdev, unsigned type)
+{
+	struct usb_gadget		*gadget = cdev->gadget;
+	struct usb_configuration	*c;
+	unsigned			count = 0;
+	int				hs = 0;
+	int				ss = 0;
+	int				ssp = 0;
+
+	if (gadget_is_dualspeed(gadget)) {
+		if (gadget->speed == USB_SPEED_HIGH)
+			hs = 1;
+		if (gadget->speed == USB_SPEED_SUPER)
+			ss = 1;
+		if (gadget->speed == USB_SPEED_SUPER_PLUS)
+			ssp = 1;
+		if (type == USB_DT_DEVICE_QUALIFIER)
+			hs = !hs;
+	}
+	list_for_each_entry(c, &cdev->configs, list) {
+		/* ignore configs that won't work at this speed */
+		if (ssp) {
+			if (!c->superspeed_plus)
+				continue;
+		} else if (ss) {
+			if (!c->superspeed)
+				continue;
+		} else if (hs) {
+			if (!c->highspeed)
+				continue;
+		} else {
+			if (!c->fullspeed)
+				continue;
+		}
+		count++;
+	}
+	return count;
+}
+
+/**
+ * bos_desc() - prepares the BOS descriptor.
+ * @cdev: pointer to usb_composite device to generate the bos
+ *	descriptor for
+ *
+ * This function generates the BOS (Binary Device Object)
+ * descriptor and its device capabilities descriptors. The BOS
+ * descriptor should be supported by a SuperSpeed device.
+ */
+static int bos_desc(struct usb_composite_dev *cdev)
+{
+	struct usb_ext_cap_descriptor	*usb_ext;
+	struct usb_dcd_config_params	dcd_config_params;
+	struct usb_bos_descriptor	*bos = cdev->req->buf;
+	unsigned int			besl = 0;
+
+	bos->bLength = USB_DT_BOS_SIZE;
+	bos->bDescriptorType = USB_DT_BOS;
+
+	bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE);
+	bos->bNumDeviceCaps = 0;
+
+	/* Get Controller configuration */
+	if (cdev->gadget->ops->get_config_params) {
+		cdev->gadget->ops->get_config_params(cdev->gadget,
+						     &dcd_config_params);
+	} else {
+		dcd_config_params.besl_baseline =
+			USB_DEFAULT_BESL_UNSPECIFIED;
+		dcd_config_params.besl_deep =
+			USB_DEFAULT_BESL_UNSPECIFIED;
+		dcd_config_params.bU1devExitLat =
+			USB_DEFAULT_U1_DEV_EXIT_LAT;
+		dcd_config_params.bU2DevExitLat =
+			cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT);
+	}
+
+	if (dcd_config_params.besl_baseline != USB_DEFAULT_BESL_UNSPECIFIED)
+		besl = USB_BESL_BASELINE_VALID |
+			USB_SET_BESL_BASELINE(dcd_config_params.besl_baseline);
+
+	if (dcd_config_params.besl_deep != USB_DEFAULT_BESL_UNSPECIFIED)
+		besl |= USB_BESL_DEEP_VALID |
+			USB_SET_BESL_DEEP(dcd_config_params.besl_deep);
+
+	/*
+	 * A SuperSpeed device shall include the USB2.0 extension descriptor
+	 * and shall support LPM when operating in USB2.0 HS mode.
+	 */
+	usb_ext = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
+	bos->bNumDeviceCaps++;
+	le16_add_cpu(&bos->wTotalLength, USB_DT_USB_EXT_CAP_SIZE);
+	usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE;
+	usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
+	usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT;
+	usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT |
+					    USB_BESL_SUPPORT | besl);
+
+	/*
+	 * The Superspeed USB Capability descriptor shall be implemented by all
+	 * SuperSpeed devices.
+	 */
+	if (gadget_is_superspeed(cdev->gadget)) {
+		struct usb_ss_cap_descriptor *ss_cap;
+
+		ss_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
+		bos->bNumDeviceCaps++;
+		le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SS_CAP_SIZE);
+		ss_cap->bLength = USB_DT_USB_SS_CAP_SIZE;
+		ss_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
+		ss_cap->bDevCapabilityType = USB_SS_CAP_TYPE;
+		ss_cap->bmAttributes = 0; /* LTM is not supported yet */
+		ss_cap->wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION |
+						      USB_FULL_SPEED_OPERATION |
+						      USB_HIGH_SPEED_OPERATION |
+						      USB_5GBPS_OPERATION);
+		ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION;
+		ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat;
+		ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat;
+	}
+
+	/* The SuperSpeedPlus USB Device Capability descriptor */
+	if (gadget_is_superspeed_plus(cdev->gadget)) {
+		struct usb_ssp_cap_descriptor *ssp_cap;
+		u8 ssac = 1;
+		u8 ssic;
+		int i;
+
+		if (cdev->gadget->max_ssp_rate == USB_SSP_GEN_2x2)
+			ssac = 3;
+
+		/*
+		 * Paired RX and TX sublink speed attributes share
+		 * the same SSID.
+		 */
+		ssic = (ssac + 1) / 2 - 1;
+
+		ssp_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
+		bos->bNumDeviceCaps++;
+
+		le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SSP_CAP_SIZE(ssac));
+		ssp_cap->bLength = USB_DT_USB_SSP_CAP_SIZE(ssac);
+		ssp_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
+		ssp_cap->bDevCapabilityType = USB_SSP_CAP_TYPE;
+		ssp_cap->bReserved = 0;
+		ssp_cap->wReserved = 0;
+
+		ssp_cap->bmAttributes =
+			cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_ATTRIBS, ssac) |
+				    FIELD_PREP(USB_SSP_SUBLINK_SPEED_IDS, ssic));
+
+		ssp_cap->wFunctionalitySupport =
+			cpu_to_le16(FIELD_PREP(USB_SSP_MIN_SUBLINK_SPEED_ATTRIBUTE_ID, 0) |
+				    FIELD_PREP(USB_SSP_MIN_RX_LANE_COUNT, 1) |
+				    FIELD_PREP(USB_SSP_MIN_TX_LANE_COUNT, 1));
+
+		/*
+		 * Use 1 SSID if the gadget supports up to gen2x1 or not
+		 * specified:
+		 * - SSID 0 for symmetric RX/TX sublink speed of 10 Gbps.
+		 *
+		 * Use 1 SSID if the gadget supports up to gen1x2:
+		 * - SSID 0 for symmetric RX/TX sublink speed of 5 Gbps.
+		 *
+		 * Use 2 SSIDs if the gadget supports up to gen2x2:
+		 * - SSID 0 for symmetric RX/TX sublink speed of 5 Gbps.
+		 * - SSID 1 for symmetric RX/TX sublink speed of 10 Gbps.
+		 */
+		for (i = 0; i < ssac + 1; i++) {
+			u8 ssid;
+			u8 mantissa;
+			u8 type;
+
+			ssid = i >> 1;
+
+			if (cdev->gadget->max_ssp_rate == USB_SSP_GEN_2x1 ||
+			    cdev->gadget->max_ssp_rate == USB_SSP_GEN_UNKNOWN)
+				mantissa = 10;
+			else
+				mantissa = 5 << ssid;
+
+			if (i % 2)
+				type = USB_SSP_SUBLINK_SPEED_ST_SYM_TX;
+			else
+				type = USB_SSP_SUBLINK_SPEED_ST_SYM_RX;
+
+			ssp_cap->bmSublinkSpeedAttr[i] =
+				cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_SSID, ssid) |
+					    FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSE,
+						       USB_SSP_SUBLINK_SPEED_LSE_GBPS) |
+					    FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST, type) |
+					    FIELD_PREP(USB_SSP_SUBLINK_SPEED_LP,
+						       USB_SSP_SUBLINK_SPEED_LP_SSP) |
+					    FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSM, mantissa));
+		}
+	}
+
+	return le16_to_cpu(bos->wTotalLength);
+}
+
+static void device_qual(struct usb_composite_dev *cdev)
+{
+	struct usb_qualifier_descriptor	*qual = cdev->req->buf;
+
+	qual->bLength = sizeof(*qual);
+	qual->bDescriptorType = USB_DT_DEVICE_QUALIFIER;
+	/* POLICY: same bcdUSB and device type info at both speeds */
+	qual->bcdUSB = cdev->desc.bcdUSB;
+	qual->bDeviceClass = cdev->desc.bDeviceClass;
+	qual->bDeviceSubClass = cdev->desc.bDeviceSubClass;
+	qual->bDeviceProtocol = cdev->desc.bDeviceProtocol;
+	/* ASSUME same EP0 fifo size at both speeds */
+	qual->bMaxPacketSize0 = cdev->gadget->ep0->maxpacket;
+	qual->bNumConfigurations = count_configs(cdev, USB_DT_DEVICE_QUALIFIER);
+	qual->bRESERVED = 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void reset_config(struct usb_composite_dev *cdev)
+{
+	struct usb_function		*f;
+
+	DBG(cdev, "reset config\n");
+
+	list_for_each_entry(f, &cdev->config->functions, list) {
+		if (f->disable)
+			f->disable(f);
+
+		bitmap_zero(f->endpoints, 32);
+	}
+	cdev->config = NULL;
+	cdev->delayed_status = 0;
+}
+
+static int set_config(struct usb_composite_dev *cdev,
+		const struct usb_ctrlrequest *ctrl, unsigned number)
+{
+	struct usb_gadget	*gadget = cdev->gadget;
+	struct usb_configuration *c = NULL, *iter;
+	int			result = -EINVAL;
+	unsigned		power = gadget_is_otg(gadget) ? 8 : 100;
+	int			tmp;
+
+	if (number) {
+		list_for_each_entry(iter, &cdev->configs, list) {
+			if (iter->bConfigurationValue != number)
+				continue;
+			/*
+			 * We disable the FDs of the previous
+			 * configuration only if the new configuration
+			 * is a valid one
+			 */
+			if (cdev->config)
+				reset_config(cdev);
+			c = iter;
+			result = 0;
+			break;
+		}
+		if (result < 0)
+			goto done;
+	} else { /* Zero configuration value - need to reset the config */
+		if (cdev->config)
+			reset_config(cdev);
+		result = 0;
+	}
+
+	DBG(cdev, "%s config #%d: %s\n",
+	    usb_speed_string(gadget->speed),
+	    number, c ? c->label : "unconfigured");
+
+	if (!c)
+		goto done;
+
+	usb_gadget_set_state(gadget, USB_STATE_CONFIGURED);
+	cdev->config = c;
+
+	/* Initialize all interfaces by setting them to altsetting zero. */
+	for (tmp = 0; tmp < MAX_CONFIG_INTERFACES; tmp++) {
+		struct usb_function	*f = c->interface[tmp];
+		struct usb_descriptor_header **descriptors;
+
+		if (!f)
+			break;
+
+		/*
+		 * Record which endpoints are used by the function. This is used
+		 * to dispatch control requests targeted at that endpoint to the
+		 * function's setup callback instead of the current
+		 * configuration's setup callback.
+		 */
+		descriptors = function_descriptors(f, gadget->speed);
+
+		for (; *descriptors; ++descriptors) {
+			struct usb_endpoint_descriptor *ep;
+			int addr;
+
+			if ((*descriptors)->bDescriptorType != USB_DT_ENDPOINT)
+				continue;
+
+			ep = (struct usb_endpoint_descriptor *)*descriptors;
+			addr = ((ep->bEndpointAddress & 0x80) >> 3)
+			     |  (ep->bEndpointAddress & 0x0f);
+			set_bit(addr, f->endpoints);
+		}
+
+		result = f->set_alt(f, tmp, 0);
+		if (result < 0) {
+			DBG(cdev, "interface %d (%s/%p) alt 0 --> %d\n",
+					tmp, f->name, f, result);
+
+			reset_config(cdev);
+			goto done;
+		}
+
+		if (result == USB_GADGET_DELAYED_STATUS) {
+			DBG(cdev,
+			 "%s: interface %d (%s) requested delayed status\n",
+					__func__, tmp, f->name);
+			cdev->delayed_status++;
+			DBG(cdev, "delayed_status count %d\n",
+					cdev->delayed_status);
+		}
+	}
+
+	/* when we return, be sure our power usage is valid */
+	if (c->MaxPower || (c->bmAttributes & USB_CONFIG_ATT_SELFPOWER))
+		power = c->MaxPower;
+	else
+		power = CONFIG_USB_GADGET_VBUS_DRAW;
+
+	if (gadget->speed < USB_SPEED_SUPER)
+		power = min(power, 500U);
+	else
+		power = min(power, 900U);
+done:
+	if (power <= USB_SELF_POWER_VBUS_MAX_DRAW)
+		usb_gadget_set_selfpowered(gadget);
+	else
+		usb_gadget_clear_selfpowered(gadget);
+
+	usb_gadget_vbus_draw(gadget, power);
+	if (result >= 0 && cdev->delayed_status)
+		result = USB_GADGET_DELAYED_STATUS;
+	return result;
+}
+
+int usb_add_config_only(struct usb_composite_dev *cdev,
+		struct usb_configuration *config)
+{
+	struct usb_configuration *c;
+
+	if (!config->bConfigurationValue)
+		return -EINVAL;
+
+	/* Prevent duplicate configuration identifiers */
+	list_for_each_entry(c, &cdev->configs, list) {
+		if (c->bConfigurationValue == config->bConfigurationValue)
+			return -EBUSY;
+	}
+
+	config->cdev = cdev;
+	list_add_tail(&config->list, &cdev->configs);
+
+	INIT_LIST_HEAD(&config->functions);
+	config->next_interface_id = 0;
+	memset(config->interface, 0, sizeof(config->interface));
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_add_config_only);
+
+/**
+ * usb_add_config() - add a configuration to a device.
+ * @cdev: wraps the USB gadget
+ * @config: the configuration, with bConfigurationValue assigned
+ * @bind: the configuration's bind function
+ * Context: single threaded during gadget setup
+ *
+ * One of the main tasks of a composite @bind() routine is to
+ * add each of the configurations it supports, using this routine.
+ *
+ * This function returns the value of the configuration's @bind(), which
+ * is zero for success else a negative errno value.  Binding configurations
+ * assigns global resources including string IDs, and per-configuration
+ * resources such as interface IDs and endpoints.
+ */
+int usb_add_config(struct usb_composite_dev *cdev,
+		struct usb_configuration *config,
+		int (*bind)(struct usb_configuration *))
+{
+	int				status = -EINVAL;
+
+	if (!bind)
+		goto done;
+
+	DBG(cdev, "adding config #%u '%s'/%p\n",
+			config->bConfigurationValue,
+			config->label, config);
+
+	status = usb_add_config_only(cdev, config);
+	if (status)
+		goto done;
+
+	status = bind(config);
+
+	if (status == 0)
+		status = usb_gadget_check_config(cdev->gadget);
+
+	if (status < 0) {
+		while (!list_empty(&config->functions)) {
+			struct usb_function		*f;
+
+			f = list_first_entry(&config->functions,
+					struct usb_function, list);
+			list_del(&f->list);
+			if (f->unbind) {
+				DBG(cdev, "unbind function '%s'/%p\n",
+					f->name, f);
+				f->unbind(config, f);
+				/* may free memory for "f" */
+			}
+		}
+		list_del(&config->list);
+		config->cdev = NULL;
+	} else {
+		unsigned	i;
+
+		DBG(cdev, "cfg %d/%p speeds:%s%s%s%s\n",
+			config->bConfigurationValue, config,
+			config->superspeed_plus ? " superplus" : "",
+			config->superspeed ? " super" : "",
+			config->highspeed ? " high" : "",
+			config->fullspeed
+				? (gadget_is_dualspeed(cdev->gadget)
+					? " full"
+					: " full/low")
+				: "");
+
+		for (i = 0; i < MAX_CONFIG_INTERFACES; i++) {
+			struct usb_function	*f = config->interface[i];
+
+			if (!f)
+				continue;
+			DBG(cdev, "  interface %d = %s/%p\n",
+				i, f->name, f);
+		}
+	}
+
+	/* set_alt(), or next bind(), sets up ep->claimed as needed */
+	usb_ep_autoconfig_reset(cdev->gadget);
+
+done:
+	if (status)
+		DBG(cdev, "added config '%s'/%u --> %d\n", config->label,
+				config->bConfigurationValue, status);
+	return status;
+}
+EXPORT_SYMBOL_GPL(usb_add_config);
+
+static void remove_config(struct usb_composite_dev *cdev,
+			      struct usb_configuration *config)
+{
+	while (!list_empty(&config->functions)) {
+		struct usb_function		*f;
+
+		f = list_first_entry(&config->functions,
+				struct usb_function, list);
+
+		usb_remove_function(config, f);
+	}
+	list_del(&config->list);
+	if (config->unbind) {
+		DBG(cdev, "unbind config '%s'/%p\n", config->label, config);
+		config->unbind(config);
+			/* may free memory for "c" */
+	}
+}
+
+/**
+ * usb_remove_config() - remove a configuration from a device.
+ * @cdev: wraps the USB gadget
+ * @config: the configuration
+ *
+ * Drivers must call usb_gadget_disconnect before calling this function
+ * to disconnect the device from the host and make sure the host will not
+ * try to enumerate the device while we are changing the config list.
+ */
+void usb_remove_config(struct usb_composite_dev *cdev,
+		      struct usb_configuration *config)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cdev->lock, flags);
+
+	if (cdev->config == config)
+		reset_config(cdev);
+
+	spin_unlock_irqrestore(&cdev->lock, flags);
+
+	remove_config(cdev, config);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* We support strings in multiple languages ... string descriptor zero
+ * says which languages are supported.  The typical case will be that
+ * only one language (probably English) is used, with i18n handled on
+ * the host side.
+ */
+
+static void collect_langs(struct usb_gadget_strings **sp, __le16 *buf)
+{
+	const struct usb_gadget_strings	*s;
+	__le16				language;
+	__le16				*tmp;
+
+	while (*sp) {
+		s = *sp;
+		language = cpu_to_le16(s->language);
+		for (tmp = buf; *tmp && tmp < &buf[USB_MAX_STRING_LEN]; tmp++) {
+			if (*tmp == language)
+				goto repeat;
+		}
+		*tmp++ = language;
+repeat:
+		sp++;
+	}
+}
+
+static int lookup_string(
+	struct usb_gadget_strings	**sp,
+	void				*buf,
+	u16				language,
+	int				id
+)
+{
+	struct usb_gadget_strings	*s;
+	int				value;
+
+	while (*sp) {
+		s = *sp++;
+		if (s->language != language)
+			continue;
+		value = usb_gadget_get_string(s, id, buf);
+		if (value > 0)
+			return value;
+	}
+	return -EINVAL;
+}
+
+static int get_string(struct usb_composite_dev *cdev,
+		void *buf, u16 language, int id)
+{
+	struct usb_composite_driver	*composite = cdev->driver;
+	struct usb_gadget_string_container *uc;
+	struct usb_configuration	*c;
+	struct usb_function		*f;
+	int				len;
+
+	/* Yes, not only is USB's i18n support probably more than most
+	 * folk will ever care about ... also, it's all supported here.
+	 * (Except for UTF8 support for Unicode's "Astral Planes".)
+	 */
+
+	/* 0 == report all available language codes */
+	if (id == 0) {
+		struct usb_string_descriptor	*s = buf;
+		struct usb_gadget_strings	**sp;
+
+		memset(s, 0, 256);
+		s->bDescriptorType = USB_DT_STRING;
+
+		sp = composite->strings;
+		if (sp)
+			collect_langs(sp, s->wData);
+
+		list_for_each_entry(c, &cdev->configs, list) {
+			sp = c->strings;
+			if (sp)
+				collect_langs(sp, s->wData);
+
+			list_for_each_entry(f, &c->functions, list) {
+				sp = f->strings;
+				if (sp)
+					collect_langs(sp, s->wData);
+			}
+		}
+		list_for_each_entry(uc, &cdev->gstrings, list) {
+			struct usb_gadget_strings **sp;
+
+			sp = get_containers_gs(uc);
+			collect_langs(sp, s->wData);
+		}
+
+		for (len = 0; len <= USB_MAX_STRING_LEN && s->wData[len]; len++)
+			continue;
+		if (!len)
+			return -EINVAL;
+
+		s->bLength = 2 * (len + 1);
+		return s->bLength;
+	}
+
+	if (cdev->use_os_string && language == 0 && id == OS_STRING_IDX) {
+		struct usb_os_string *b = buf;
+		b->bLength = sizeof(*b);
+		b->bDescriptorType = USB_DT_STRING;
+		compiletime_assert(
+			sizeof(b->qwSignature) == sizeof(cdev->qw_sign),
+			"qwSignature size must be equal to qw_sign");
+		memcpy(&b->qwSignature, cdev->qw_sign, sizeof(b->qwSignature));
+		b->bMS_VendorCode = cdev->b_vendor_code;
+		b->bPad = 0;
+		return sizeof(*b);
+	}
+
+	list_for_each_entry(uc, &cdev->gstrings, list) {
+		struct usb_gadget_strings **sp;
+
+		sp = get_containers_gs(uc);
+		len = lookup_string(sp, buf, language, id);
+		if (len > 0)
+			return len;
+	}
+
+	/* String IDs are device-scoped, so we look up each string
+	 * table we're told about.  These lookups are infrequent;
+	 * simpler-is-better here.
+	 */
+	if (composite->strings) {
+		len = lookup_string(composite->strings, buf, language, id);
+		if (len > 0)
+			return len;
+	}
+	list_for_each_entry(c, &cdev->configs, list) {
+		if (c->strings) {
+			len = lookup_string(c->strings, buf, language, id);
+			if (len > 0)
+				return len;
+		}
+		list_for_each_entry(f, &c->functions, list) {
+			if (!f->strings)
+				continue;
+			len = lookup_string(f->strings, buf, language, id);
+			if (len > 0)
+				return len;
+		}
+	}
+	return -EINVAL;
+}
+
+/**
+ * usb_string_id() - allocate an unused string ID
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * Context: single threaded during gadget setup
+ *
+ * @usb_string_id() is called from bind() callbacks to allocate
+ * string IDs.  Drivers for functions, configurations, or gadgets will
+ * then store that ID in the appropriate descriptors and string table.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_ids_tab() or @usb_string_ids_n() routine, to ensure
+ * that for example different functions don't wrongly assign different
+ * meanings to the same identifier.
+ */
+int usb_string_id(struct usb_composite_dev *cdev)
+{
+	if (cdev->next_string_id < 254) {
+		/* string id 0 is reserved by USB spec for list of
+		 * supported languages */
+		/* 255 reserved as well? -- mina86 */
+		cdev->next_string_id++;
+		return cdev->next_string_id;
+	}
+	return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(usb_string_id);
+
+/**
+ * usb_string_ids_tab() - allocate unused string IDs in batch
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * @str: an array of usb_string objects to assign numbers to
+ * Context: single threaded during gadget setup
+ *
+ * @usb_string_ids() is called from bind() callbacks to allocate
+ * string IDs.  Drivers for functions, configurations, or gadgets will
+ * then copy IDs from the string table to the appropriate descriptors
+ * and string table for other languages.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
+ * example different functions don't wrongly assign different meanings
+ * to the same identifier.
+ */
+int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str)
+{
+	int next = cdev->next_string_id;
+
+	for (; str->s; ++str) {
+		if (unlikely(next >= 254))
+			return -ENODEV;
+		str->id = ++next;
+	}
+
+	cdev->next_string_id = next;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_string_ids_tab);
+
+static struct usb_gadget_string_container *copy_gadget_strings(
+		struct usb_gadget_strings **sp, unsigned n_gstrings,
+		unsigned n_strings)
+{
+	struct usb_gadget_string_container *uc;
+	struct usb_gadget_strings **gs_array;
+	struct usb_gadget_strings *gs;
+	struct usb_string *s;
+	unsigned mem;
+	unsigned n_gs;
+	unsigned n_s;
+	void *stash;
+
+	mem = sizeof(*uc);
+	mem += sizeof(void *) * (n_gstrings + 1);
+	mem += sizeof(struct usb_gadget_strings) * n_gstrings;
+	mem += sizeof(struct usb_string) * (n_strings + 1) * (n_gstrings);
+	uc = kmalloc(mem, GFP_KERNEL);
+	if (!uc)
+		return ERR_PTR(-ENOMEM);
+	gs_array = get_containers_gs(uc);
+	stash = uc->stash;
+	stash += sizeof(void *) * (n_gstrings + 1);
+	for (n_gs = 0; n_gs < n_gstrings; n_gs++) {
+		struct usb_string *org_s;
+
+		gs_array[n_gs] = stash;
+		gs = gs_array[n_gs];
+		stash += sizeof(struct usb_gadget_strings);
+		gs->language = sp[n_gs]->language;
+		gs->strings = stash;
+		org_s = sp[n_gs]->strings;
+
+		for (n_s = 0; n_s < n_strings; n_s++) {
+			s = stash;
+			stash += sizeof(struct usb_string);
+			if (org_s->s)
+				s->s = org_s->s;
+			else
+				s->s = "";
+			org_s++;
+		}
+		s = stash;
+		s->s = NULL;
+		stash += sizeof(struct usb_string);
+
+	}
+	gs_array[n_gs] = NULL;
+	return uc;
+}
+
+/**
+ * usb_gstrings_attach() - attach gadget strings to a cdev and assign ids
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * and attached.
+ * @sp: an array of usb_gadget_strings to attach.
+ * @n_strings: number of entries in each usb_strings array (sp[]->strings)
+ *
+ * This function will create a deep copy of usb_gadget_strings and usb_string
+ * and attach it to the cdev. The actual string (usb_string.s) will not be
+ * copied but only a referenced will be made. The struct usb_gadget_strings
+ * array may contain multiple languages and should be NULL terminated.
+ * The ->language pointer of each struct usb_gadget_strings has to contain the
+ * same amount of entries.
+ * For instance: sp[0] is en-US, sp[1] is es-ES. It is expected that the first
+ * usb_string entry of es-ES contains the translation of the first usb_string
+ * entry of en-US. Therefore both entries become the same id assign.
+ */
+struct usb_string *usb_gstrings_attach(struct usb_composite_dev *cdev,
+		struct usb_gadget_strings **sp, unsigned n_strings)
+{
+	struct usb_gadget_string_container *uc;
+	struct usb_gadget_strings **n_gs;
+	unsigned n_gstrings = 0;
+	unsigned i;
+	int ret;
+
+	for (i = 0; sp[i]; i++)
+		n_gstrings++;
+
+	if (!n_gstrings)
+		return ERR_PTR(-EINVAL);
+
+	uc = copy_gadget_strings(sp, n_gstrings, n_strings);
+	if (IS_ERR(uc))
+		return ERR_CAST(uc);
+
+	n_gs = get_containers_gs(uc);
+	ret = usb_string_ids_tab(cdev, n_gs[0]->strings);
+	if (ret)
+		goto err;
+
+	for (i = 1; i < n_gstrings; i++) {
+		struct usb_string *m_s;
+		struct usb_string *s;
+		unsigned n;
+
+		m_s = n_gs[0]->strings;
+		s = n_gs[i]->strings;
+		for (n = 0; n < n_strings; n++) {
+			s->id = m_s->id;
+			s++;
+			m_s++;
+		}
+	}
+	list_add_tail(&uc->list, &cdev->gstrings);
+	return n_gs[0]->strings;
+err:
+	kfree(uc);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(usb_gstrings_attach);
+
+/**
+ * usb_string_ids_n() - allocate unused string IDs in batch
+ * @c: the device whose string descriptor IDs are being allocated
+ * @n: number of string IDs to allocate
+ * Context: single threaded during gadget setup
+ *
+ * Returns the first requested ID.  This ID and next @n-1 IDs are now
+ * valid IDs.  At least provided that @n is non-zero because if it
+ * is, returns last requested ID which is now very useful information.
+ *
+ * @usb_string_ids_n() is called from bind() callbacks to allocate
+ * string IDs.  Drivers for functions, configurations, or gadgets will
+ * then store that ID in the appropriate descriptors and string table.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
+ * example different functions don't wrongly assign different meanings
+ * to the same identifier.
+ */
+int usb_string_ids_n(struct usb_composite_dev *c, unsigned n)
+{
+	unsigned next = c->next_string_id;
+	if (unlikely(n > 254 || (unsigned)next + n > 254))
+		return -ENODEV;
+	c->next_string_id += n;
+	return next + 1;
+}
+EXPORT_SYMBOL_GPL(usb_string_ids_n);
+
+/*-------------------------------------------------------------------------*/
+
+static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct usb_composite_dev *cdev;
+
+	if (req->status || req->actual != req->length)
+		DBG((struct usb_composite_dev *) ep->driver_data,
+				"setup complete --> %d, %d/%d\n",
+				req->status, req->actual, req->length);
+
+	/*
+	 * REVIST The same ep0 requests are shared with function drivers
+	 * so they don't have to maintain the same ->complete() stubs.
+	 *
+	 * Because of that, we need to check for the validity of ->context
+	 * here, even though we know we've set it to something useful.
+	 */
+	if (!req->context)
+		return;
+
+	cdev = req->context;
+
+	if (cdev->req == req)
+		cdev->setup_pending = false;
+	else if (cdev->os_desc_req == req)
+		cdev->os_desc_pending = false;
+	else
+		WARN(1, "unknown request %p\n", req);
+}
+
+static int composite_ep0_queue(struct usb_composite_dev *cdev,
+		struct usb_request *req, gfp_t gfp_flags)
+{
+	int ret;
+
+	ret = usb_ep_queue(cdev->gadget->ep0, req, gfp_flags);
+	if (ret == 0) {
+		if (cdev->req == req)
+			cdev->setup_pending = true;
+		else if (cdev->os_desc_req == req)
+			cdev->os_desc_pending = true;
+		else
+			WARN(1, "unknown request %p\n", req);
+	}
+
+	return ret;
+}
+
+static int count_ext_compat(struct usb_configuration *c)
+{
+	int i, res;
+
+	res = 0;
+	for (i = 0; i < c->next_interface_id; ++i) {
+		struct usb_function *f;
+		int j;
+
+		f = c->interface[i];
+		for (j = 0; j < f->os_desc_n; ++j) {
+			struct usb_os_desc *d;
+
+			if (i != f->os_desc_table[j].if_id)
+				continue;
+			d = f->os_desc_table[j].os_desc;
+			if (d && d->ext_compat_id)
+				++res;
+		}
+	}
+	BUG_ON(res > 255);
+	return res;
+}
+
+static int fill_ext_compat(struct usb_configuration *c, u8 *buf)
+{
+	int i, count;
+
+	count = 16;
+	buf += 16;
+	for (i = 0; i < c->next_interface_id; ++i) {
+		struct usb_function *f;
+		int j;
+
+		f = c->interface[i];
+		for (j = 0; j < f->os_desc_n; ++j) {
+			struct usb_os_desc *d;
+
+			if (i != f->os_desc_table[j].if_id)
+				continue;
+			d = f->os_desc_table[j].os_desc;
+			if (d && d->ext_compat_id) {
+				*buf++ = i;
+				*buf++ = 0x01;
+				memcpy(buf, d->ext_compat_id, 16);
+				buf += 22;
+			} else {
+				++buf;
+				*buf = 0x01;
+				buf += 23;
+			}
+			count += 24;
+			if (count + 24 >= USB_COMP_EP0_OS_DESC_BUFSIZ)
+				return count;
+		}
+	}
+
+	return count;
+}
+
+static int count_ext_prop(struct usb_configuration *c, int interface)
+{
+	struct usb_function *f;
+	int j;
+
+	f = c->interface[interface];
+	for (j = 0; j < f->os_desc_n; ++j) {
+		struct usb_os_desc *d;
+
+		if (interface != f->os_desc_table[j].if_id)
+			continue;
+		d = f->os_desc_table[j].os_desc;
+		if (d && d->ext_compat_id)
+			return d->ext_prop_count;
+	}
+	return 0;
+}
+
+static int len_ext_prop(struct usb_configuration *c, int interface)
+{
+	struct usb_function *f;
+	struct usb_os_desc *d;
+	int j, res;
+
+	res = 10; /* header length */
+	f = c->interface[interface];
+	for (j = 0; j < f->os_desc_n; ++j) {
+		if (interface != f->os_desc_table[j].if_id)
+			continue;
+		d = f->os_desc_table[j].os_desc;
+		if (d)
+			return min(res + d->ext_prop_len, 4096);
+	}
+	return res;
+}
+
+static int fill_ext_prop(struct usb_configuration *c, int interface, u8 *buf)
+{
+	struct usb_function *f;
+	struct usb_os_desc *d;
+	struct usb_os_desc_ext_prop *ext_prop;
+	int j, count, n, ret;
+
+	f = c->interface[interface];
+	count = 10; /* header length */
+	buf += 10;
+	for (j = 0; j < f->os_desc_n; ++j) {
+		if (interface != f->os_desc_table[j].if_id)
+			continue;
+		d = f->os_desc_table[j].os_desc;
+		if (d)
+			list_for_each_entry(ext_prop, &d->ext_prop, entry) {
+				n = ext_prop->data_len +
+					ext_prop->name_len + 14;
+				if (count + n >= USB_COMP_EP0_OS_DESC_BUFSIZ)
+					return count;
+				usb_ext_prop_put_size(buf, n);
+				usb_ext_prop_put_type(buf, ext_prop->type);
+				ret = usb_ext_prop_put_name(buf, ext_prop->name,
+							    ext_prop->name_len);
+				if (ret < 0)
+					return ret;
+				switch (ext_prop->type) {
+				case USB_EXT_PROP_UNICODE:
+				case USB_EXT_PROP_UNICODE_ENV:
+				case USB_EXT_PROP_UNICODE_LINK:
+					usb_ext_prop_put_unicode(buf, ret,
+							 ext_prop->data,
+							 ext_prop->data_len);
+					break;
+				case USB_EXT_PROP_BINARY:
+					usb_ext_prop_put_binary(buf, ret,
+							ext_prop->data,
+							ext_prop->data_len);
+					break;
+				case USB_EXT_PROP_LE32:
+					/* not implemented */
+				case USB_EXT_PROP_BE32:
+					/* not implemented */
+				default:
+					return -EINVAL;
+				}
+				buf += n;
+				count += n;
+			}
+	}
+
+	return count;
+}
+
+/*
+ * The setup() callback implements all the ep0 functionality that's
+ * not handled lower down, in hardware or the hardware driver(like
+ * device and endpoint feature flags, and their status).  It's all
+ * housekeeping for the gadget function we're implementing.  Most of
+ * the work is in config and function specific setup.
+ */
+int
+composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+	struct usb_request		*req = cdev->req;
+	int				value = -EOPNOTSUPP;
+	int				status = 0;
+	u16				w_index = le16_to_cpu(ctrl->wIndex);
+	u8				intf = w_index & 0xFF;
+	u16				w_value = le16_to_cpu(ctrl->wValue);
+	u16				w_length = le16_to_cpu(ctrl->wLength);
+	struct usb_function		*f = NULL;
+	struct usb_function		*iter;
+	u8				endp;
+
+	if (w_length > USB_COMP_EP0_BUFSIZ) {
+		if (ctrl->bRequestType & USB_DIR_IN) {
+			/* Cast away the const, we are going to overwrite on purpose. */
+			__le16 *temp = (__le16 *)&ctrl->wLength;
+
+			*temp = cpu_to_le16(USB_COMP_EP0_BUFSIZ);
+			w_length = USB_COMP_EP0_BUFSIZ;
+		} else {
+			goto done;
+		}
+	}
+
+	/* partial re-init of the response message; the function or the
+	 * gadget might need to intercept e.g. a control-OUT completion
+	 * when we delegate to it.
+	 */
+	req->zero = 0;
+	req->context = cdev;
+	req->complete = composite_setup_complete;
+	req->length = 0;
+	gadget->ep0->driver_data = cdev;
+
+	/*
+	 * Don't let non-standard requests match any of the cases below
+	 * by accident.
+	 */
+	if ((ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD)
+		goto unknown;
+
+	switch (ctrl->bRequest) {
+
+	/* we handle all standard USB descriptors */
+	case USB_REQ_GET_DESCRIPTOR:
+		if (ctrl->bRequestType != USB_DIR_IN)
+			goto unknown;
+		switch (w_value >> 8) {
+
+		case USB_DT_DEVICE:
+			cdev->desc.bNumConfigurations =
+				count_configs(cdev, USB_DT_DEVICE);
+			cdev->desc.bMaxPacketSize0 =
+				cdev->gadget->ep0->maxpacket;
+			if (gadget_is_superspeed(gadget)) {
+				if (gadget->speed >= USB_SPEED_SUPER) {
+					cdev->desc.bcdUSB = cpu_to_le16(0x0320);
+					cdev->desc.bMaxPacketSize0 = 9;
+				} else {
+					cdev->desc.bcdUSB = cpu_to_le16(0x0210);
+				}
+			} else {
+				if (gadget->lpm_capable)
+					cdev->desc.bcdUSB = cpu_to_le16(0x0201);
+				else
+					cdev->desc.bcdUSB = cpu_to_le16(0x0200);
+			}
+
+			value = min(w_length, (u16) sizeof cdev->desc);
+			memcpy(req->buf, &cdev->desc, value);
+			break;
+		case USB_DT_DEVICE_QUALIFIER:
+			if (!gadget_is_dualspeed(gadget) ||
+			    gadget->speed >= USB_SPEED_SUPER)
+				break;
+			device_qual(cdev);
+			value = min_t(int, w_length,
+				sizeof(struct usb_qualifier_descriptor));
+			break;
+		case USB_DT_OTHER_SPEED_CONFIG:
+			if (!gadget_is_dualspeed(gadget) ||
+			    gadget->speed >= USB_SPEED_SUPER)
+				break;
+			fallthrough;
+		case USB_DT_CONFIG:
+			value = config_desc(cdev, w_value);
+			if (value >= 0)
+				value = min(w_length, (u16) value);
+			break;
+		case USB_DT_STRING:
+			value = get_string(cdev, req->buf,
+					w_index, w_value & 0xff);
+			if (value >= 0)
+				value = min(w_length, (u16) value);
+			break;
+		case USB_DT_BOS:
+			if (gadget_is_superspeed(gadget) ||
+			    gadget->lpm_capable) {
+				value = bos_desc(cdev);
+				value = min(w_length, (u16) value);
+			}
+			break;
+		case USB_DT_OTG:
+			if (gadget_is_otg(gadget)) {
+				struct usb_configuration *config;
+				int otg_desc_len = 0;
+
+				if (cdev->config)
+					config = cdev->config;
+				else
+					config = list_first_entry(
+							&cdev->configs,
+						struct usb_configuration, list);
+				if (!config)
+					goto done;
+
+				if (gadget->otg_caps &&
+					(gadget->otg_caps->otg_rev >= 0x0200))
+					otg_desc_len += sizeof(
+						struct usb_otg20_descriptor);
+				else
+					otg_desc_len += sizeof(
+						struct usb_otg_descriptor);
+
+				value = min_t(int, w_length, otg_desc_len);
+				memcpy(req->buf, config->descriptors[0], value);
+			}
+			break;
+		}
+		break;
+
+	/* any number of configs can work */
+	case USB_REQ_SET_CONFIGURATION:
+		if (ctrl->bRequestType != 0)
+			goto unknown;
+		if (gadget_is_otg(gadget)) {
+			if (gadget->a_hnp_support)
+				DBG(cdev, "HNP available\n");
+			else if (gadget->a_alt_hnp_support)
+				DBG(cdev, "HNP on another port\n");
+			else
+				VDBG(cdev, "HNP inactive\n");
+		}
+		spin_lock(&cdev->lock);
+		value = set_config(cdev, ctrl, w_value);
+		spin_unlock(&cdev->lock);
+		break;
+	case USB_REQ_GET_CONFIGURATION:
+		if (ctrl->bRequestType != USB_DIR_IN)
+			goto unknown;
+		if (cdev->config)
+			*(u8 *)req->buf = cdev->config->bConfigurationValue;
+		else
+			*(u8 *)req->buf = 0;
+		value = min(w_length, (u16) 1);
+		break;
+
+	/* function drivers must handle get/set altsetting */
+	case USB_REQ_SET_INTERFACE:
+		if (ctrl->bRequestType != USB_RECIP_INTERFACE)
+			goto unknown;
+		if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+			break;
+		f = cdev->config->interface[intf];
+		if (!f)
+			break;
+
+		/*
+		 * If there's no get_alt() method, we know only altsetting zero
+		 * works. There is no need to check if set_alt() is not NULL
+		 * as we check this in usb_add_function().
+		 */
+		if (w_value && !f->get_alt)
+			break;
+
+		spin_lock(&cdev->lock);
+		value = f->set_alt(f, w_index, w_value);
+		if (value == USB_GADGET_DELAYED_STATUS) {
+			DBG(cdev,
+			 "%s: interface %d (%s) requested delayed status\n",
+					__func__, intf, f->name);
+			cdev->delayed_status++;
+			DBG(cdev, "delayed_status count %d\n",
+					cdev->delayed_status);
+		}
+		spin_unlock(&cdev->lock);
+		break;
+	case USB_REQ_GET_INTERFACE:
+		if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
+			goto unknown;
+		if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+			break;
+		f = cdev->config->interface[intf];
+		if (!f)
+			break;
+		/* lots of interfaces only need altsetting zero... */
+		value = f->get_alt ? f->get_alt(f, w_index) : 0;
+		if (value < 0)
+			break;
+		*((u8 *)req->buf) = value;
+		value = min(w_length, (u16) 1);
+		break;
+	case USB_REQ_GET_STATUS:
+		if (gadget_is_otg(gadget) && gadget->hnp_polling_support &&
+						(w_index == OTG_STS_SELECTOR)) {
+			if (ctrl->bRequestType != (USB_DIR_IN |
+							USB_RECIP_DEVICE))
+				goto unknown;
+			*((u8 *)req->buf) = gadget->host_request_flag;
+			value = 1;
+			break;
+		}
+
+		/*
+		 * USB 3.0 additions:
+		 * Function driver should handle get_status request. If such cb
+		 * wasn't supplied we respond with default value = 0
+		 * Note: function driver should supply such cb only for the
+		 * first interface of the function
+		 */
+		if (!gadget_is_superspeed(gadget))
+			goto unknown;
+		if (ctrl->bRequestType != (USB_DIR_IN | USB_RECIP_INTERFACE))
+			goto unknown;
+		value = 2;	/* This is the length of the get_status reply */
+		put_unaligned_le16(0, req->buf);
+		if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+			break;
+		f = cdev->config->interface[intf];
+		if (!f)
+			break;
+		status = f->get_status ? f->get_status(f) : 0;
+		if (status < 0)
+			break;
+		put_unaligned_le16(status & 0x0000ffff, req->buf);
+		break;
+	/*
+	 * Function drivers should handle SetFeature/ClearFeature
+	 * (FUNCTION_SUSPEND) request. function_suspend cb should be supplied
+	 * only for the first interface of the function
+	 */
+	case USB_REQ_CLEAR_FEATURE:
+	case USB_REQ_SET_FEATURE:
+		if (!gadget_is_superspeed(gadget))
+			goto unknown;
+		if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_INTERFACE))
+			goto unknown;
+		switch (w_value) {
+		case USB_INTRF_FUNC_SUSPEND:
+			if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+				break;
+			f = cdev->config->interface[intf];
+			if (!f)
+				break;
+			value = 0;
+			if (f->func_suspend)
+				value = f->func_suspend(f, w_index >> 8);
+			if (value < 0) {
+				ERROR(cdev,
+				      "func_suspend() returned error %d\n",
+				      value);
+				value = 0;
+			}
+			break;
+		}
+		break;
+	default:
+unknown:
+		/*
+		 * OS descriptors handling
+		 */
+		if (cdev->use_os_string && cdev->os_desc_config &&
+		    (ctrl->bRequestType & USB_TYPE_VENDOR) &&
+		    ctrl->bRequest == cdev->b_vendor_code) {
+			struct usb_configuration	*os_desc_cfg;
+			u8				*buf;
+			int				interface;
+			int				count = 0;
+
+			req = cdev->os_desc_req;
+			req->context = cdev;
+			req->complete = composite_setup_complete;
+			buf = req->buf;
+			os_desc_cfg = cdev->os_desc_config;
+			w_length = min_t(u16, w_length, USB_COMP_EP0_OS_DESC_BUFSIZ);
+			memset(buf, 0, w_length);
+			buf[5] = 0x01;
+			switch (ctrl->bRequestType & USB_RECIP_MASK) {
+			case USB_RECIP_DEVICE:
+				if (w_index != 0x4 || (w_value >> 8))
+					break;
+				buf[6] = w_index;
+				/* Number of ext compat interfaces */
+				count = count_ext_compat(os_desc_cfg);
+				buf[8] = count;
+				count *= 24; /* 24 B/ext compat desc */
+				count += 16; /* header */
+				put_unaligned_le32(count, buf);
+				value = w_length;
+				if (w_length > 0x10) {
+					value = fill_ext_compat(os_desc_cfg, buf);
+					value = min_t(u16, w_length, value);
+				}
+				break;
+			case USB_RECIP_INTERFACE:
+				if (w_index != 0x5 || (w_value >> 8))
+					break;
+				interface = w_value & 0xFF;
+				if (interface >= MAX_CONFIG_INTERFACES ||
+				    !os_desc_cfg->interface[interface])
+					break;
+				buf[6] = w_index;
+				count = count_ext_prop(os_desc_cfg,
+					interface);
+				put_unaligned_le16(count, buf + 8);
+				count = len_ext_prop(os_desc_cfg,
+					interface);
+				put_unaligned_le32(count, buf);
+				value = w_length;
+				if (w_length > 0x0A) {
+					value = fill_ext_prop(os_desc_cfg,
+							      interface, buf);
+					if (value >= 0)
+						value = min_t(u16, w_length, value);
+				}
+				break;
+			}
+
+			goto check_value;
+		}
+
+		VDBG(cdev,
+			"non-core control req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+
+		/* functions always handle their interfaces and endpoints...
+		 * punt other recipients (other, WUSB, ...) to the current
+		 * configuration code.
+		 */
+		if (cdev->config) {
+			list_for_each_entry(f, &cdev->config->functions, list)
+				if (f->req_match &&
+				    f->req_match(f, ctrl, false))
+					goto try_fun_setup;
+		} else {
+			struct usb_configuration *c;
+			list_for_each_entry(c, &cdev->configs, list)
+				list_for_each_entry(f, &c->functions, list)
+					if (f->req_match &&
+					    f->req_match(f, ctrl, true))
+						goto try_fun_setup;
+		}
+		f = NULL;
+
+		switch (ctrl->bRequestType & USB_RECIP_MASK) {
+		case USB_RECIP_INTERFACE:
+			if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+				break;
+			f = cdev->config->interface[intf];
+			break;
+
+		case USB_RECIP_ENDPOINT:
+			if (!cdev->config)
+				break;
+			endp = ((w_index & 0x80) >> 3) | (w_index & 0x0f);
+			list_for_each_entry(iter, &cdev->config->functions, list) {
+				if (test_bit(endp, iter->endpoints)) {
+					f = iter;
+					break;
+				}
+			}
+			break;
+		}
+try_fun_setup:
+		if (f && f->setup)
+			value = f->setup(f, ctrl);
+		else {
+			struct usb_configuration	*c;
+
+			c = cdev->config;
+			if (!c)
+				goto done;
+
+			/* try current config's setup */
+			if (c->setup) {
+				value = c->setup(c, ctrl);
+				goto done;
+			}
+
+			/* try the only function in the current config */
+			if (!list_is_singular(&c->functions))
+				goto done;
+			f = list_first_entry(&c->functions, struct usb_function,
+					     list);
+			if (f->setup)
+				value = f->setup(f, ctrl);
+		}
+
+		goto done;
+	}
+
+check_value:
+	/* respond with data transfer before status phase? */
+	if (value >= 0 && value != USB_GADGET_DELAYED_STATUS) {
+		req->length = value;
+		req->context = cdev;
+		req->zero = value < w_length;
+		value = composite_ep0_queue(cdev, req, GFP_ATOMIC);
+		if (value < 0) {
+			DBG(cdev, "ep_queue --> %d\n", value);
+			req->status = 0;
+			composite_setup_complete(gadget->ep0, req);
+		}
+	} else if (value == USB_GADGET_DELAYED_STATUS && w_length != 0) {
+		WARN(cdev,
+			"%s: Delayed status not supported for w_length != 0",
+			__func__);
+	}
+
+done:
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+static void __composite_disconnect(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+	unsigned long			flags;
+
+	/* REVISIT:  should we have config and device level
+	 * disconnect callbacks?
+	 */
+	spin_lock_irqsave(&cdev->lock, flags);
+	cdev->suspended = 0;
+	if (cdev->config)
+		reset_config(cdev);
+	if (cdev->driver->disconnect)
+		cdev->driver->disconnect(cdev);
+	spin_unlock_irqrestore(&cdev->lock, flags);
+}
+
+void composite_disconnect(struct usb_gadget *gadget)
+{
+	usb_gadget_vbus_draw(gadget, 0);
+	__composite_disconnect(gadget);
+}
+
+void composite_reset(struct usb_gadget *gadget)
+{
+	/*
+	 * Section 1.4.13 Standard Downstream Port of the USB battery charging
+	 * specification v1.2 states that a device connected on a SDP shall only
+	 * draw at max 100mA while in a connected, but unconfigured state.
+	 */
+	usb_gadget_vbus_draw(gadget, 100);
+	__composite_disconnect(gadget);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static ssize_t suspended_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct usb_gadget *gadget = dev_to_usb_gadget(dev);
+	struct usb_composite_dev *cdev = get_gadget_data(gadget);
+
+	return sprintf(buf, "%d\n", cdev->suspended);
+}
+static DEVICE_ATTR_RO(suspended);
+
+static void __composite_unbind(struct usb_gadget *gadget, bool unbind_driver)
+{
+	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+	struct usb_gadget_strings	*gstr = cdev->driver->strings[0];
+	struct usb_string		*dev_str = gstr->strings;
+
+	/* composite_disconnect() must already have been called
+	 * by the underlying peripheral controller driver!
+	 * so there's no i/o concurrency that could affect the
+	 * state protected by cdev->lock.
+	 */
+	WARN_ON(cdev->config);
+
+	while (!list_empty(&cdev->configs)) {
+		struct usb_configuration	*c;
+		c = list_first_entry(&cdev->configs,
+				struct usb_configuration, list);
+		remove_config(cdev, c);
+	}
+	if (cdev->driver->unbind && unbind_driver)
+		cdev->driver->unbind(cdev);
+
+	composite_dev_cleanup(cdev);
+
+	if (dev_str[USB_GADGET_MANUFACTURER_IDX].s == cdev->def_manufacturer)
+		dev_str[USB_GADGET_MANUFACTURER_IDX].s = "";
+
+	kfree(cdev->def_manufacturer);
+	kfree(cdev);
+	set_gadget_data(gadget, NULL);
+}
+
+static void composite_unbind(struct usb_gadget *gadget)
+{
+	__composite_unbind(gadget, true);
+}
+
+static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
+		const struct usb_device_descriptor *old)
+{
+	__le16 idVendor;
+	__le16 idProduct;
+	__le16 bcdDevice;
+	u8 iSerialNumber;
+	u8 iManufacturer;
+	u8 iProduct;
+
+	/*
+	 * these variables may have been set in
+	 * usb_composite_overwrite_options()
+	 */
+	idVendor = new->idVendor;
+	idProduct = new->idProduct;
+	bcdDevice = new->bcdDevice;
+	iSerialNumber = new->iSerialNumber;
+	iManufacturer = new->iManufacturer;
+	iProduct = new->iProduct;
+
+	*new = *old;
+	if (idVendor)
+		new->idVendor = idVendor;
+	if (idProduct)
+		new->idProduct = idProduct;
+	if (bcdDevice)
+		new->bcdDevice = bcdDevice;
+	else
+		new->bcdDevice = cpu_to_le16(get_default_bcdDevice());
+	if (iSerialNumber)
+		new->iSerialNumber = iSerialNumber;
+	if (iManufacturer)
+		new->iManufacturer = iManufacturer;
+	if (iProduct)
+		new->iProduct = iProduct;
+}
+
+int composite_dev_prepare(struct usb_composite_driver *composite,
+		struct usb_composite_dev *cdev)
+{
+	struct usb_gadget *gadget = cdev->gadget;
+	int ret = -ENOMEM;
+
+	/* preallocate control response and buffer */
+	cdev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
+	if (!cdev->req)
+		return -ENOMEM;
+
+	cdev->req->buf = kzalloc(USB_COMP_EP0_BUFSIZ, GFP_KERNEL);
+	if (!cdev->req->buf)
+		goto fail;
+
+	ret = device_create_file(&gadget->dev, &dev_attr_suspended);
+	if (ret)
+		goto fail_dev;
+
+	cdev->req->complete = composite_setup_complete;
+	cdev->req->context = cdev;
+	gadget->ep0->driver_data = cdev;
+
+	cdev->driver = composite;
+
+	/*
+	 * As per USB compliance update, a device that is actively drawing
+	 * more than 100mA from USB must report itself as bus-powered in
+	 * the GetStatus(DEVICE) call.
+	 */
+	if (CONFIG_USB_GADGET_VBUS_DRAW <= USB_SELF_POWER_VBUS_MAX_DRAW)
+		usb_gadget_set_selfpowered(gadget);
+
+	/* interface and string IDs start at zero via kzalloc.
+	 * we force endpoints to start unassigned; few controller
+	 * drivers will zero ep->driver_data.
+	 */
+	usb_ep_autoconfig_reset(gadget);
+	return 0;
+fail_dev:
+	kfree(cdev->req->buf);
+fail:
+	usb_ep_free_request(gadget->ep0, cdev->req);
+	cdev->req = NULL;
+	return ret;
+}
+
+int composite_os_desc_req_prepare(struct usb_composite_dev *cdev,
+				  struct usb_ep *ep0)
+{
+	int ret = 0;
+
+	cdev->os_desc_req = usb_ep_alloc_request(ep0, GFP_KERNEL);
+	if (!cdev->os_desc_req) {
+		ret = -ENOMEM;
+		goto end;
+	}
+
+	cdev->os_desc_req->buf = kmalloc(USB_COMP_EP0_OS_DESC_BUFSIZ,
+					 GFP_KERNEL);
+	if (!cdev->os_desc_req->buf) {
+		ret = -ENOMEM;
+		usb_ep_free_request(ep0, cdev->os_desc_req);
+		goto end;
+	}
+	cdev->os_desc_req->context = cdev;
+	cdev->os_desc_req->complete = composite_setup_complete;
+end:
+	return ret;
+}
+
+void composite_dev_cleanup(struct usb_composite_dev *cdev)
+{
+	struct usb_gadget_string_container *uc, *tmp;
+	struct usb_ep			   *ep, *tmp_ep;
+
+	list_for_each_entry_safe(uc, tmp, &cdev->gstrings, list) {
+		list_del(&uc->list);
+		kfree(uc);
+	}
+	if (cdev->os_desc_req) {
+		if (cdev->os_desc_pending)
+			usb_ep_dequeue(cdev->gadget->ep0, cdev->os_desc_req);
+
+		kfree(cdev->os_desc_req->buf);
+		cdev->os_desc_req->buf = NULL;
+		usb_ep_free_request(cdev->gadget->ep0, cdev->os_desc_req);
+		cdev->os_desc_req = NULL;
+	}
+	if (cdev->req) {
+		if (cdev->setup_pending)
+			usb_ep_dequeue(cdev->gadget->ep0, cdev->req);
+
+		kfree(cdev->req->buf);
+		cdev->req->buf = NULL;
+		usb_ep_free_request(cdev->gadget->ep0, cdev->req);
+		cdev->req = NULL;
+	}
+	cdev->next_string_id = 0;
+	device_remove_file(&cdev->gadget->dev, &dev_attr_suspended);
+
+	/*
+	 * Some UDC backends have a dynamic EP allocation scheme.
+	 *
+	 * In that case, the dispose() callback is used to notify the
+	 * backend that the EPs are no longer in use.
+	 *
+	 * Note: The UDC backend can remove the EP from the ep_list as
+	 *	 a result, so we need to use the _safe list iterator.
+	 */
+	list_for_each_entry_safe(ep, tmp_ep,
+				 &cdev->gadget->ep_list, ep_list) {
+		if (ep->ops->dispose)
+			ep->ops->dispose(ep);
+	}
+}
+
+static int composite_bind(struct usb_gadget *gadget,
+		struct usb_gadget_driver *gdriver)
+{
+	struct usb_composite_dev	*cdev;
+	struct usb_composite_driver	*composite = to_cdriver(gdriver);
+	int				status = -ENOMEM;
+
+	cdev = kzalloc(sizeof *cdev, GFP_KERNEL);
+	if (!cdev)
+		return status;
+
+	spin_lock_init(&cdev->lock);
+	cdev->gadget = gadget;
+	set_gadget_data(gadget, cdev);
+	INIT_LIST_HEAD(&cdev->configs);
+	INIT_LIST_HEAD(&cdev->gstrings);
+
+	status = composite_dev_prepare(composite, cdev);
+	if (status)
+		goto fail;
+
+	/* composite gadget needs to assign strings for whole device (like
+	 * serial number), register function drivers, potentially update
+	 * power state and consumption, etc
+	 */
+	status = composite->bind(cdev);
+	if (status < 0)
+		goto fail;
+
+	if (cdev->use_os_string) {
+		status = composite_os_desc_req_prepare(cdev, gadget->ep0);
+		if (status)
+			goto fail;
+	}
+
+	update_unchanged_dev_desc(&cdev->desc, composite->dev);
+
+	/* has userspace failed to provide a serial number? */
+	if (composite->needs_serial && !cdev->desc.iSerialNumber)
+		WARNING(cdev, "userspace failed to provide iSerialNumber\n");
+
+	INFO(cdev, "%s ready\n", composite->name);
+	return 0;
+
+fail:
+	__composite_unbind(gadget, false);
+	return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+void composite_suspend(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+	struct usb_function		*f;
+
+	/* REVISIT:  should we have config level
+	 * suspend/resume callbacks?
+	 */
+	DBG(cdev, "suspend\n");
+	if (cdev->config) {
+		list_for_each_entry(f, &cdev->config->functions, list) {
+			if (f->suspend)
+				f->suspend(f);
+		}
+	}
+	if (cdev->driver->suspend)
+		cdev->driver->suspend(cdev);
+
+	cdev->suspended = 1;
+
+	usb_gadget_set_selfpowered(gadget);
+	usb_gadget_vbus_draw(gadget, 2);
+}
+
+void composite_resume(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+	struct usb_function		*f;
+	unsigned			maxpower;
+
+	/* REVISIT:  should we have config level
+	 * suspend/resume callbacks?
+	 */
+	DBG(cdev, "resume\n");
+	if (cdev->driver->resume)
+		cdev->driver->resume(cdev);
+	if (cdev->config) {
+		list_for_each_entry(f, &cdev->config->functions, list) {
+			if (f->resume)
+				f->resume(f);
+		}
+
+		maxpower = cdev->config->MaxPower ?
+			cdev->config->MaxPower : CONFIG_USB_GADGET_VBUS_DRAW;
+		if (gadget->speed < USB_SPEED_SUPER)
+			maxpower = min(maxpower, 500U);
+		else
+			maxpower = min(maxpower, 900U);
+
+		if (maxpower > USB_SELF_POWER_VBUS_MAX_DRAW)
+			usb_gadget_clear_selfpowered(gadget);
+
+		usb_gadget_vbus_draw(gadget, maxpower);
+	}
+
+	cdev->suspended = 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_gadget_driver composite_driver_template = {
+	.bind		= composite_bind,
+	.unbind		= composite_unbind,
+
+	.setup		= composite_setup,
+	.reset		= composite_reset,
+	.disconnect	= composite_disconnect,
+
+	.suspend	= composite_suspend,
+	.resume		= composite_resume,
+
+	.driver	= {
+		.owner		= THIS_MODULE,
+	},
+};
+
+/**
+ * usb_composite_probe() - register a composite driver
+ * @driver: the driver to register
+ *
+ * Context: single threaded during gadget setup
+ *
+ * This function is used to register drivers using the composite driver
+ * framework.  The return value is zero, or a negative errno value.
+ * Those values normally come from the driver's @bind method, which does
+ * all the work of setting up the driver to match the hardware.
+ *
+ * On successful return, the gadget is ready to respond to requests from
+ * the host, unless one of its components invokes usb_gadget_disconnect()
+ * while it was binding.  That would usually be done in order to wait for
+ * some userspace participation.
+ */
+int usb_composite_probe(struct usb_composite_driver *driver)
+{
+	struct usb_gadget_driver *gadget_driver;
+
+	if (!driver || !driver->dev || !driver->bind)
+		return -EINVAL;
+
+	if (!driver->name)
+		driver->name = "composite";
+
+	driver->gadget_driver = composite_driver_template;
+	gadget_driver = &driver->gadget_driver;
+
+	gadget_driver->function =  (char *) driver->name;
+	gadget_driver->driver.name = driver->name;
+	gadget_driver->max_speed = driver->max_speed;
+
+	return usb_gadget_register_driver(gadget_driver);
+}
+EXPORT_SYMBOL_GPL(usb_composite_probe);
+
+/**
+ * usb_composite_unregister() - unregister a composite driver
+ * @driver: the driver to unregister
+ *
+ * This function is used to unregister drivers using the composite
+ * driver framework.
+ */
+void usb_composite_unregister(struct usb_composite_driver *driver)
+{
+	usb_gadget_unregister_driver(&driver->gadget_driver);
+}
+EXPORT_SYMBOL_GPL(usb_composite_unregister);
+
+/**
+ * usb_composite_setup_continue() - Continue with the control transfer
+ * @cdev: the composite device who's control transfer was kept waiting
+ *
+ * This function must be called by the USB function driver to continue
+ * with the control transfer's data/status stage in case it had requested to
+ * delay the data/status stages. A USB function's setup handler (e.g. set_alt())
+ * can request the composite framework to delay the setup request's data/status
+ * stages by returning USB_GADGET_DELAYED_STATUS.
+ */
+void usb_composite_setup_continue(struct usb_composite_dev *cdev)
+{
+	int			value;
+	struct usb_request	*req = cdev->req;
+	unsigned long		flags;
+
+	DBG(cdev, "%s\n", __func__);
+	spin_lock_irqsave(&cdev->lock, flags);
+
+	if (cdev->delayed_status == 0) {
+		WARN(cdev, "%s: Unexpected call\n", __func__);
+
+	} else if (--cdev->delayed_status == 0) {
+		DBG(cdev, "%s: Completing delayed status\n", __func__);
+		req->length = 0;
+		req->context = cdev;
+		value = composite_ep0_queue(cdev, req, GFP_ATOMIC);
+		if (value < 0) {
+			DBG(cdev, "ep_queue --> %d\n", value);
+			req->status = 0;
+			composite_setup_complete(cdev->gadget->ep0, req);
+		}
+	}
+
+	spin_unlock_irqrestore(&cdev->lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_composite_setup_continue);
+
+static char *composite_default_mfr(struct usb_gadget *gadget)
+{
+	return kasprintf(GFP_KERNEL, "%s %s with %s", init_utsname()->sysname,
+			 init_utsname()->release, gadget->name);
+}
+
+void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
+		struct usb_composite_overwrite *covr)
+{
+	struct usb_device_descriptor	*desc = &cdev->desc;
+	struct usb_gadget_strings	*gstr = cdev->driver->strings[0];
+	struct usb_string		*dev_str = gstr->strings;
+
+	if (covr->idVendor)
+		desc->idVendor = cpu_to_le16(covr->idVendor);
+
+	if (covr->idProduct)
+		desc->idProduct = cpu_to_le16(covr->idProduct);
+
+	if (covr->bcdDevice)
+		desc->bcdDevice = cpu_to_le16(covr->bcdDevice);
+
+	if (covr->serial_number) {
+		desc->iSerialNumber = dev_str[USB_GADGET_SERIAL_IDX].id;
+		dev_str[USB_GADGET_SERIAL_IDX].s = covr->serial_number;
+	}
+	if (covr->manufacturer) {
+		desc->iManufacturer = dev_str[USB_GADGET_MANUFACTURER_IDX].id;
+		dev_str[USB_GADGET_MANUFACTURER_IDX].s = covr->manufacturer;
+
+	} else if (!strlen(dev_str[USB_GADGET_MANUFACTURER_IDX].s)) {
+		desc->iManufacturer = dev_str[USB_GADGET_MANUFACTURER_IDX].id;
+		cdev->def_manufacturer = composite_default_mfr(cdev->gadget);
+		dev_str[USB_GADGET_MANUFACTURER_IDX].s = cdev->def_manufacturer;
+	}
+
+	if (covr->product) {
+		desc->iProduct = dev_str[USB_GADGET_PRODUCT_IDX].id;
+		dev_str[USB_GADGET_PRODUCT_IDX].s = covr->product;
+	}
+}
+EXPORT_SYMBOL_GPL(usb_composite_overwrite_options);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
new file mode 100644
index 000000000..05507606b
--- /dev/null
+++ b/drivers/usb/gadget/config.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * usb/gadget/config.c -- simplify building config descriptors
+ *
+ * Copyright (C) 2003 David Brownell
+ */
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/device.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/otg.h>
+
+/**
+ * usb_descriptor_fillbuf - fill buffer with descriptors
+ * @buf: Buffer to be filled
+ * @buflen: Size of buf
+ * @src: Array of descriptor pointers, terminated by null pointer.
+ *
+ * Copies descriptors into the buffer, returning the length or a
+ * negative error code if they can't all be copied.  Useful when
+ * assembling descriptors for an associated set of interfaces used
+ * as part of configuring a composite device; or in other cases where
+ * sets of descriptors need to be marshaled.
+ */
+int
+usb_descriptor_fillbuf(void *buf, unsigned buflen,
+		const struct usb_descriptor_header **src)
+{
+	u8	*dest = buf;
+
+	if (!src)
+		return -EINVAL;
+
+	/* fill buffer from src[] until null descriptor ptr */
+	for (; NULL != *src; src++) {
+		unsigned		len = (*src)->bLength;
+
+		if (len > buflen)
+			return -EINVAL;
+		memcpy(dest, *src, len);
+		buflen -= len;
+		dest += len;
+	}
+	return dest - (u8 *)buf;
+}
+EXPORT_SYMBOL_GPL(usb_descriptor_fillbuf);
+
+/**
+ * usb_gadget_config_buf - builts a complete configuration descriptor
+ * @config: Header for the descriptor, including characteristics such
+ *	as power requirements and number of interfaces.
+ * @desc: Null-terminated vector of pointers to the descriptors (interface,
+ *	endpoint, etc) defining all functions in this device configuration.
+ * @buf: Buffer for the resulting configuration descriptor.
+ * @length: Length of buffer.  If this is not big enough to hold the
+ *	entire configuration descriptor, an error code will be returned.
+ *
+ * This copies descriptors into the response buffer, building a descriptor
+ * for that configuration.  It returns the buffer length or a negative
+ * status code.  The config.wTotalLength field is set to match the length
+ * of the result, but other descriptor fields (including power usage and
+ * interface count) must be set by the caller.
+ *
+ * Gadget drivers could use this when constructing a config descriptor
+ * in response to USB_REQ_GET_DESCRIPTOR.  They will need to patch the
+ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed.
+ */
+int usb_gadget_config_buf(
+	const struct usb_config_descriptor	*config,
+	void					*buf,
+	unsigned				length,
+	const struct usb_descriptor_header	**desc
+)
+{
+	struct usb_config_descriptor		*cp = buf;
+	int					len;
+
+	/* config descriptor first */
+	if (length < USB_DT_CONFIG_SIZE || !desc)
+		return -EINVAL;
+	*cp = *config;
+
+	/* then interface/endpoint/class/vendor/... */
+	len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8 *)buf,
+			length - USB_DT_CONFIG_SIZE, desc);
+	if (len < 0)
+		return len;
+	len += USB_DT_CONFIG_SIZE;
+	if (len > 0xffff)
+		return -EINVAL;
+
+	/* patch up the config descriptor */
+	cp->bLength = USB_DT_CONFIG_SIZE;
+	cp->bDescriptorType = USB_DT_CONFIG;
+	cp->wTotalLength = cpu_to_le16(len);
+	cp->bmAttributes |= USB_CONFIG_ATT_ONE;
+	return len;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_config_buf);
+
+/**
+ * usb_copy_descriptors - copy a vector of USB descriptors
+ * @src: null-terminated vector to copy
+ * Context: initialization code, which may sleep
+ *
+ * This makes a copy of a vector of USB descriptors.  Its primary use
+ * is to support usb_function objects which can have multiple copies,
+ * each needing different descriptors.  Functions may have static
+ * tables of descriptors, which are used as templates and customized
+ * with identifiers (for interfaces, strings, endpoints, and more)
+ * as needed by a given function instance.
+ */
+struct usb_descriptor_header **
+usb_copy_descriptors(struct usb_descriptor_header **src)
+{
+	struct usb_descriptor_header **tmp;
+	unsigned bytes;
+	unsigned n_desc;
+	void *mem;
+	struct usb_descriptor_header **ret;
+
+	/* count descriptors and their sizes; then add vector size */
+	for (bytes = 0, n_desc = 0, tmp = src; *tmp; tmp++, n_desc++)
+		bytes += (*tmp)->bLength;
+	bytes += (n_desc + 1) * sizeof(*tmp);
+
+	mem = kmalloc(bytes, GFP_KERNEL);
+	if (!mem)
+		return NULL;
+
+	/* fill in pointers starting at "tmp",
+	 * to descriptors copied starting at "mem";
+	 * and return "ret"
+	 */
+	tmp = mem;
+	ret = mem;
+	mem += (n_desc + 1) * sizeof(*tmp);
+	while (*src) {
+		memcpy(mem, *src, (*src)->bLength);
+		*tmp = mem;
+		tmp++;
+		mem += (*src)->bLength;
+		src++;
+	}
+	*tmp = NULL;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_copy_descriptors);
+
+int usb_assign_descriptors(struct usb_function *f,
+		struct usb_descriptor_header **fs,
+		struct usb_descriptor_header **hs,
+		struct usb_descriptor_header **ss,
+		struct usb_descriptor_header **ssp)
+{
+	struct usb_gadget *g = f->config->cdev->gadget;
+
+	/* super-speed-plus descriptor falls back to super-speed one,
+	 * if such a descriptor was provided, thus avoiding a NULL
+	 * pointer dereference if a 5gbps capable gadget is used with
+	 * a 10gbps capable config (device port + cable + host port)
+	 */
+	if (!ssp)
+		ssp = ss;
+
+	if (fs) {
+		f->fs_descriptors = usb_copy_descriptors(fs);
+		if (!f->fs_descriptors)
+			goto err;
+	}
+	if (hs && gadget_is_dualspeed(g)) {
+		f->hs_descriptors = usb_copy_descriptors(hs);
+		if (!f->hs_descriptors)
+			goto err;
+	}
+	if (ss && gadget_is_superspeed(g)) {
+		f->ss_descriptors = usb_copy_descriptors(ss);
+		if (!f->ss_descriptors)
+			goto err;
+	}
+	if (ssp && gadget_is_superspeed_plus(g)) {
+		f->ssp_descriptors = usb_copy_descriptors(ssp);
+		if (!f->ssp_descriptors)
+			goto err;
+	}
+	return 0;
+err:
+	usb_free_all_descriptors(f);
+	return -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(usb_assign_descriptors);
+
+void usb_free_all_descriptors(struct usb_function *f)
+{
+	usb_free_descriptors(f->fs_descriptors);
+	f->fs_descriptors = NULL;
+	usb_free_descriptors(f->hs_descriptors);
+	f->hs_descriptors = NULL;
+	usb_free_descriptors(f->ss_descriptors);
+	f->ss_descriptors = NULL;
+	usb_free_descriptors(f->ssp_descriptors);
+	f->ssp_descriptors = NULL;
+}
+EXPORT_SYMBOL_GPL(usb_free_all_descriptors);
+
+struct usb_descriptor_header *usb_otg_descriptor_alloc(
+				struct usb_gadget *gadget)
+{
+	struct usb_descriptor_header *otg_desc;
+	unsigned length = 0;
+
+	if (gadget->otg_caps && (gadget->otg_caps->otg_rev >= 0x0200))
+		length = sizeof(struct usb_otg20_descriptor);
+	else
+		length = sizeof(struct usb_otg_descriptor);
+
+	otg_desc = kzalloc(length, GFP_KERNEL);
+	return otg_desc;
+}
+EXPORT_SYMBOL_GPL(usb_otg_descriptor_alloc);
+
+int usb_otg_descriptor_init(struct usb_gadget *gadget,
+		struct usb_descriptor_header *otg_desc)
+{
+	struct usb_otg_descriptor *otg1x_desc;
+	struct usb_otg20_descriptor *otg20_desc;
+	struct usb_otg_caps *otg_caps = gadget->otg_caps;
+	u8 otg_attributes = 0;
+
+	if (!otg_desc)
+		return -EINVAL;
+
+	if (otg_caps && otg_caps->otg_rev) {
+		if (otg_caps->hnp_support)
+			otg_attributes |= USB_OTG_HNP;
+		if (otg_caps->srp_support)
+			otg_attributes |= USB_OTG_SRP;
+		if (otg_caps->adp_support && (otg_caps->otg_rev >= 0x0200))
+			otg_attributes |= USB_OTG_ADP;
+	} else {
+		otg_attributes = USB_OTG_SRP | USB_OTG_HNP;
+	}
+
+	if (otg_caps && (otg_caps->otg_rev >= 0x0200)) {
+		otg20_desc = (struct usb_otg20_descriptor *)otg_desc;
+		otg20_desc->bLength = sizeof(struct usb_otg20_descriptor);
+		otg20_desc->bDescriptorType = USB_DT_OTG;
+		otg20_desc->bmAttributes = otg_attributes;
+		otg20_desc->bcdOTG = cpu_to_le16(otg_caps->otg_rev);
+	} else {
+		otg1x_desc = (struct usb_otg_descriptor *)otg_desc;
+		otg1x_desc->bLength = sizeof(struct usb_otg_descriptor);
+		otg1x_desc->bDescriptorType = USB_DT_OTG;
+		otg1x_desc->bmAttributes = otg_attributes;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_otg_descriptor_init);
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
new file mode 100644
index 000000000..4dcf29577
--- /dev/null
+++ b/drivers/usb/gadget/configfs.c
@@ -0,0 +1,1701 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/configfs.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/nls.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget_configfs.h>
+#include "configfs.h"
+#include "u_f.h"
+#include "u_os_desc.h"
+
+int check_user_usb_string(const char *name,
+		struct usb_gadget_strings *stringtab_dev)
+{
+	u16 num;
+	int ret;
+
+	ret = kstrtou16(name, 0, &num);
+	if (ret)
+		return ret;
+
+	if (!usb_validate_langid(num))
+		return -EINVAL;
+
+	stringtab_dev->language = num;
+	return 0;
+}
+
+#define MAX_NAME_LEN	40
+#define MAX_USB_STRING_LANGS 2
+
+static const struct usb_descriptor_header *otg_desc[2];
+
+struct gadget_info {
+	struct config_group group;
+	struct config_group functions_group;
+	struct config_group configs_group;
+	struct config_group strings_group;
+	struct config_group os_desc_group;
+
+	struct mutex lock;
+	struct usb_gadget_strings *gstrings[MAX_USB_STRING_LANGS + 1];
+	struct list_head string_list;
+	struct list_head available_func;
+
+	struct usb_composite_driver composite;
+	struct usb_composite_dev cdev;
+	bool use_os_desc;
+	char b_vendor_code;
+	char qw_sign[OS_STRING_QW_SIGN_LEN];
+	spinlock_t spinlock;
+	bool unbind;
+};
+
+static inline struct gadget_info *to_gadget_info(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct gadget_info, group);
+}
+
+struct config_usb_cfg {
+	struct config_group group;
+	struct config_group strings_group;
+	struct list_head string_list;
+	struct usb_configuration c;
+	struct list_head func_list;
+	struct usb_gadget_strings *gstrings[MAX_USB_STRING_LANGS + 1];
+};
+
+static inline struct config_usb_cfg *to_config_usb_cfg(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct config_usb_cfg,
+			group);
+}
+
+static inline struct gadget_info *cfg_to_gadget_info(struct config_usb_cfg *cfg)
+{
+	return container_of(cfg->c.cdev, struct gadget_info, cdev);
+}
+
+struct gadget_strings {
+	struct usb_gadget_strings stringtab_dev;
+	struct usb_string strings[USB_GADGET_FIRST_AVAIL_IDX];
+	char *manufacturer;
+	char *product;
+	char *serialnumber;
+
+	struct config_group group;
+	struct list_head list;
+};
+
+struct gadget_config_name {
+	struct usb_gadget_strings stringtab_dev;
+	struct usb_string strings;
+	char *configuration;
+
+	struct config_group group;
+	struct list_head list;
+};
+
+#define USB_MAX_STRING_WITH_NULL_LEN	(USB_MAX_STRING_LEN+1)
+
+static int usb_string_copy(const char *s, char **s_copy)
+{
+	int ret;
+	char *str;
+	char *copy = *s_copy;
+	ret = strlen(s);
+	if (ret > USB_MAX_STRING_LEN)
+		return -EOVERFLOW;
+
+	if (copy) {
+		str = copy;
+	} else {
+		str = kmalloc(USB_MAX_STRING_WITH_NULL_LEN, GFP_KERNEL);
+		if (!str)
+			return -ENOMEM;
+	}
+	strcpy(str, s);
+	if (str[ret - 1] == '\n')
+		str[ret - 1] = '\0';
+	*s_copy = str;
+	return 0;
+}
+
+#define GI_DEVICE_DESC_SIMPLE_R_u8(__name)	\
+static ssize_t gadget_dev_desc_##__name##_show(struct config_item *item, \
+			char *page)	\
+{	\
+	return sprintf(page, "0x%02x\n", \
+		to_gadget_info(item)->cdev.desc.__name); \
+}
+
+#define GI_DEVICE_DESC_SIMPLE_R_u16(__name)	\
+static ssize_t gadget_dev_desc_##__name##_show(struct config_item *item, \
+			char *page)	\
+{	\
+	return sprintf(page, "0x%04x\n", \
+		le16_to_cpup(&to_gadget_info(item)->cdev.desc.__name)); \
+}
+
+
+#define GI_DEVICE_DESC_SIMPLE_W_u8(_name)		\
+static ssize_t gadget_dev_desc_##_name##_store(struct config_item *item, \
+		const char *page, size_t len)		\
+{							\
+	u8 val;						\
+	int ret;					\
+	ret = kstrtou8(page, 0, &val);			\
+	if (ret)					\
+		return ret;				\
+	to_gadget_info(item)->cdev.desc._name = val;	\
+	return len;					\
+}
+
+#define GI_DEVICE_DESC_SIMPLE_W_u16(_name)	\
+static ssize_t gadget_dev_desc_##_name##_store(struct config_item *item, \
+		const char *page, size_t len)		\
+{							\
+	u16 val;					\
+	int ret;					\
+	ret = kstrtou16(page, 0, &val);			\
+	if (ret)					\
+		return ret;				\
+	to_gadget_info(item)->cdev.desc._name = cpu_to_le16p(&val);	\
+	return len;					\
+}
+
+#define GI_DEVICE_DESC_SIMPLE_RW(_name, _type)	\
+	GI_DEVICE_DESC_SIMPLE_R_##_type(_name)	\
+	GI_DEVICE_DESC_SIMPLE_W_##_type(_name)
+
+GI_DEVICE_DESC_SIMPLE_R_u16(bcdUSB);
+GI_DEVICE_DESC_SIMPLE_RW(bDeviceClass, u8);
+GI_DEVICE_DESC_SIMPLE_RW(bDeviceSubClass, u8);
+GI_DEVICE_DESC_SIMPLE_RW(bDeviceProtocol, u8);
+GI_DEVICE_DESC_SIMPLE_RW(bMaxPacketSize0, u8);
+GI_DEVICE_DESC_SIMPLE_RW(idVendor, u16);
+GI_DEVICE_DESC_SIMPLE_RW(idProduct, u16);
+GI_DEVICE_DESC_SIMPLE_R_u16(bcdDevice);
+
+static ssize_t is_valid_bcd(u16 bcd_val)
+{
+	if ((bcd_val & 0xf) > 9)
+		return -EINVAL;
+	if (((bcd_val >> 4) & 0xf) > 9)
+		return -EINVAL;
+	if (((bcd_val >> 8) & 0xf) > 9)
+		return -EINVAL;
+	if (((bcd_val >> 12) & 0xf) > 9)
+		return -EINVAL;
+	return 0;
+}
+
+static ssize_t gadget_dev_desc_bcdDevice_store(struct config_item *item,
+		const char *page, size_t len)
+{
+	u16 bcdDevice;
+	int ret;
+
+	ret = kstrtou16(page, 0, &bcdDevice);
+	if (ret)
+		return ret;
+	ret = is_valid_bcd(bcdDevice);
+	if (ret)
+		return ret;
+
+	to_gadget_info(item)->cdev.desc.bcdDevice = cpu_to_le16(bcdDevice);
+	return len;
+}
+
+static ssize_t gadget_dev_desc_bcdUSB_store(struct config_item *item,
+		const char *page, size_t len)
+{
+	u16 bcdUSB;
+	int ret;
+
+	ret = kstrtou16(page, 0, &bcdUSB);
+	if (ret)
+		return ret;
+	ret = is_valid_bcd(bcdUSB);
+	if (ret)
+		return ret;
+
+	to_gadget_info(item)->cdev.desc.bcdUSB = cpu_to_le16(bcdUSB);
+	return len;
+}
+
+static ssize_t gadget_dev_desc_UDC_show(struct config_item *item, char *page)
+{
+	struct gadget_info *gi = to_gadget_info(item);
+	char *udc_name;
+	int ret;
+
+	mutex_lock(&gi->lock);
+	udc_name = gi->composite.gadget_driver.udc_name;
+	ret = sprintf(page, "%s\n", udc_name ?: "");
+	mutex_unlock(&gi->lock);
+
+	return ret;
+}
+
+static int unregister_gadget(struct gadget_info *gi)
+{
+	int ret;
+
+	if (!gi->composite.gadget_driver.udc_name)
+		return -ENODEV;
+
+	ret = usb_gadget_unregister_driver(&gi->composite.gadget_driver);
+	if (ret)
+		return ret;
+	kfree(gi->composite.gadget_driver.udc_name);
+	gi->composite.gadget_driver.udc_name = NULL;
+	return 0;
+}
+
+static ssize_t gadget_dev_desc_UDC_store(struct config_item *item,
+		const char *page, size_t len)
+{
+	struct gadget_info *gi = to_gadget_info(item);
+	char *name;
+	int ret;
+
+	if (strlen(page) < len)
+		return -EOVERFLOW;
+
+	name = kstrdup(page, GFP_KERNEL);
+	if (!name)
+		return -ENOMEM;
+	if (name[len - 1] == '\n')
+		name[len - 1] = '\0';
+
+	mutex_lock(&gi->lock);
+
+	if (!strlen(name)) {
+		ret = unregister_gadget(gi);
+		if (ret)
+			goto err;
+		kfree(name);
+	} else {
+		if (gi->composite.gadget_driver.udc_name) {
+			ret = -EBUSY;
+			goto err;
+		}
+		gi->composite.gadget_driver.udc_name = name;
+		ret = usb_gadget_register_driver(&gi->composite.gadget_driver);
+		if (ret) {
+			gi->composite.gadget_driver.udc_name = NULL;
+			goto err;
+		}
+	}
+	mutex_unlock(&gi->lock);
+	return len;
+err:
+	kfree(name);
+	mutex_unlock(&gi->lock);
+	return ret;
+}
+
+static ssize_t gadget_dev_desc_max_speed_show(struct config_item *item,
+					      char *page)
+{
+	enum usb_device_speed speed = to_gadget_info(item)->composite.max_speed;
+
+	return sprintf(page, "%s\n", usb_speed_string(speed));
+}
+
+static ssize_t gadget_dev_desc_max_speed_store(struct config_item *item,
+					       const char *page, size_t len)
+{
+	struct gadget_info *gi = to_gadget_info(item);
+
+	mutex_lock(&gi->lock);
+
+	/* Prevent changing of max_speed after the driver is binded */
+	if (gi->composite.gadget_driver.udc_name)
+		goto err;
+
+	if (strncmp(page, "super-speed-plus", 16) == 0)
+		gi->composite.max_speed = USB_SPEED_SUPER_PLUS;
+	else if (strncmp(page, "super-speed", 11) == 0)
+		gi->composite.max_speed = USB_SPEED_SUPER;
+	else if (strncmp(page, "high-speed", 10) == 0)
+		gi->composite.max_speed = USB_SPEED_HIGH;
+	else if (strncmp(page, "full-speed", 10) == 0)
+		gi->composite.max_speed = USB_SPEED_FULL;
+	else if (strncmp(page, "low-speed", 9) == 0)
+		gi->composite.max_speed = USB_SPEED_LOW;
+	else
+		goto err;
+
+	gi->composite.gadget_driver.max_speed = gi->composite.max_speed;
+
+	mutex_unlock(&gi->lock);
+	return len;
+err:
+	mutex_unlock(&gi->lock);
+	return -EINVAL;
+}
+
+CONFIGFS_ATTR(gadget_dev_desc_, bDeviceClass);
+CONFIGFS_ATTR(gadget_dev_desc_, bDeviceSubClass);
+CONFIGFS_ATTR(gadget_dev_desc_, bDeviceProtocol);
+CONFIGFS_ATTR(gadget_dev_desc_, bMaxPacketSize0);
+CONFIGFS_ATTR(gadget_dev_desc_, idVendor);
+CONFIGFS_ATTR(gadget_dev_desc_, idProduct);
+CONFIGFS_ATTR(gadget_dev_desc_, bcdDevice);
+CONFIGFS_ATTR(gadget_dev_desc_, bcdUSB);
+CONFIGFS_ATTR(gadget_dev_desc_, UDC);
+CONFIGFS_ATTR(gadget_dev_desc_, max_speed);
+
+static struct configfs_attribute *gadget_root_attrs[] = {
+	&gadget_dev_desc_attr_bDeviceClass,
+	&gadget_dev_desc_attr_bDeviceSubClass,
+	&gadget_dev_desc_attr_bDeviceProtocol,
+	&gadget_dev_desc_attr_bMaxPacketSize0,
+	&gadget_dev_desc_attr_idVendor,
+	&gadget_dev_desc_attr_idProduct,
+	&gadget_dev_desc_attr_bcdDevice,
+	&gadget_dev_desc_attr_bcdUSB,
+	&gadget_dev_desc_attr_UDC,
+	&gadget_dev_desc_attr_max_speed,
+	NULL,
+};
+
+static inline struct gadget_strings *to_gadget_strings(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct gadget_strings,
+			 group);
+}
+
+static inline struct gadget_config_name *to_gadget_config_name(
+		struct config_item *item)
+{
+	return container_of(to_config_group(item), struct gadget_config_name,
+			 group);
+}
+
+static inline struct usb_function_instance *to_usb_function_instance(
+		struct config_item *item)
+{
+	return container_of(to_config_group(item),
+			 struct usb_function_instance, group);
+}
+
+static void gadget_info_attr_release(struct config_item *item)
+{
+	struct gadget_info *gi = to_gadget_info(item);
+
+	WARN_ON(!list_empty(&gi->cdev.configs));
+	WARN_ON(!list_empty(&gi->string_list));
+	WARN_ON(!list_empty(&gi->available_func));
+	kfree(gi->composite.gadget_driver.function);
+	kfree(gi->composite.gadget_driver.driver.name);
+	kfree(gi);
+}
+
+static struct configfs_item_operations gadget_root_item_ops = {
+	.release                = gadget_info_attr_release,
+};
+
+static void gadget_config_attr_release(struct config_item *item)
+{
+	struct config_usb_cfg *cfg = to_config_usb_cfg(item);
+
+	WARN_ON(!list_empty(&cfg->c.functions));
+	list_del(&cfg->c.list);
+	kfree(cfg->c.label);
+	kfree(cfg);
+}
+
+static int config_usb_cfg_link(
+	struct config_item *usb_cfg_ci,
+	struct config_item *usb_func_ci)
+{
+	struct config_usb_cfg *cfg = to_config_usb_cfg(usb_cfg_ci);
+	struct gadget_info *gi = cfg_to_gadget_info(cfg);
+
+	struct usb_function_instance *fi =
+			to_usb_function_instance(usb_func_ci);
+	struct usb_function_instance *a_fi = NULL, *iter;
+	struct usb_function *f;
+	int ret;
+
+	mutex_lock(&gi->lock);
+	/*
+	 * Make sure this function is from within our _this_ gadget and not
+	 * from another gadget or a random directory.
+	 * Also a function instance can only be linked once.
+	 */
+
+	if (gi->composite.gadget_driver.udc_name) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	list_for_each_entry(iter, &gi->available_func, cfs_list) {
+		if (iter != fi)
+			continue;
+		a_fi = iter;
+		break;
+	}
+	if (!a_fi) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	list_for_each_entry(f, &cfg->func_list, list) {
+		if (f->fi == fi) {
+			ret = -EEXIST;
+			goto out;
+		}
+	}
+
+	f = usb_get_function(fi);
+	if (IS_ERR(f)) {
+		ret = PTR_ERR(f);
+		goto out;
+	}
+
+	/* stash the function until we bind it to the gadget */
+	list_add_tail(&f->list, &cfg->func_list);
+	ret = 0;
+out:
+	mutex_unlock(&gi->lock);
+	return ret;
+}
+
+static void config_usb_cfg_unlink(
+	struct config_item *usb_cfg_ci,
+	struct config_item *usb_func_ci)
+{
+	struct config_usb_cfg *cfg = to_config_usb_cfg(usb_cfg_ci);
+	struct gadget_info *gi = cfg_to_gadget_info(cfg);
+
+	struct usb_function_instance *fi =
+			to_usb_function_instance(usb_func_ci);
+	struct usb_function *f;
+
+	/*
+	 * ideally I would like to forbid to unlink functions while a gadget is
+	 * bound to an UDC. Since this isn't possible at the moment, we simply
+	 * force an unbind, the function is available here and then we can
+	 * remove the function.
+	 */
+	mutex_lock(&gi->lock);
+	if (gi->composite.gadget_driver.udc_name)
+		unregister_gadget(gi);
+	WARN_ON(gi->composite.gadget_driver.udc_name);
+
+	list_for_each_entry(f, &cfg->func_list, list) {
+		if (f->fi == fi) {
+			list_del(&f->list);
+			usb_put_function(f);
+			mutex_unlock(&gi->lock);
+			return;
+		}
+	}
+	mutex_unlock(&gi->lock);
+	WARN(1, "Unable to locate function to unbind\n");
+}
+
+static struct configfs_item_operations gadget_config_item_ops = {
+	.release                = gadget_config_attr_release,
+	.allow_link             = config_usb_cfg_link,
+	.drop_link              = config_usb_cfg_unlink,
+};
+
+
+static ssize_t gadget_config_desc_MaxPower_show(struct config_item *item,
+		char *page)
+{
+	struct config_usb_cfg *cfg = to_config_usb_cfg(item);
+
+	return sprintf(page, "%u\n", cfg->c.MaxPower);
+}
+
+static ssize_t gadget_config_desc_MaxPower_store(struct config_item *item,
+		const char *page, size_t len)
+{
+	struct config_usb_cfg *cfg = to_config_usb_cfg(item);
+	u16 val;
+	int ret;
+	ret = kstrtou16(page, 0, &val);
+	if (ret)
+		return ret;
+	if (DIV_ROUND_UP(val, 8) > 0xff)
+		return -ERANGE;
+	cfg->c.MaxPower = val;
+	return len;
+}
+
+static ssize_t gadget_config_desc_bmAttributes_show(struct config_item *item,
+		char *page)
+{
+	struct config_usb_cfg *cfg = to_config_usb_cfg(item);
+
+	return sprintf(page, "0x%02x\n", cfg->c.bmAttributes);
+}
+
+static ssize_t gadget_config_desc_bmAttributes_store(struct config_item *item,
+		const char *page, size_t len)
+{
+	struct config_usb_cfg *cfg = to_config_usb_cfg(item);
+	u8 val;
+	int ret;
+	ret = kstrtou8(page, 0, &val);
+	if (ret)
+		return ret;
+	if (!(val & USB_CONFIG_ATT_ONE))
+		return -EINVAL;
+	if (val & ~(USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER |
+				USB_CONFIG_ATT_WAKEUP))
+		return -EINVAL;
+	cfg->c.bmAttributes = val;
+	return len;
+}
+
+CONFIGFS_ATTR(gadget_config_desc_, MaxPower);
+CONFIGFS_ATTR(gadget_config_desc_, bmAttributes);
+
+static struct configfs_attribute *gadget_config_attrs[] = {
+	&gadget_config_desc_attr_MaxPower,
+	&gadget_config_desc_attr_bmAttributes,
+	NULL,
+};
+
+static const struct config_item_type gadget_config_type = {
+	.ct_item_ops	= &gadget_config_item_ops,
+	.ct_attrs	= gadget_config_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static const struct config_item_type gadget_root_type = {
+	.ct_item_ops	= &gadget_root_item_ops,
+	.ct_attrs	= gadget_root_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void composite_init_dev(struct usb_composite_dev *cdev)
+{
+	spin_lock_init(&cdev->lock);
+	INIT_LIST_HEAD(&cdev->configs);
+	INIT_LIST_HEAD(&cdev->gstrings);
+}
+
+static struct config_group *function_make(
+		struct config_group *group,
+		const char *name)
+{
+	struct gadget_info *gi;
+	struct usb_function_instance *fi;
+	char buf[MAX_NAME_LEN];
+	char *func_name;
+	char *instance_name;
+	int ret;
+
+	ret = snprintf(buf, MAX_NAME_LEN, "%s", name);
+	if (ret >= MAX_NAME_LEN)
+		return ERR_PTR(-ENAMETOOLONG);
+
+	func_name = buf;
+	instance_name = strchr(func_name, '.');
+	if (!instance_name) {
+		pr_err("Unable to locate . in FUNC.INSTANCE\n");
+		return ERR_PTR(-EINVAL);
+	}
+	*instance_name = '\0';
+	instance_name++;
+
+	fi = usb_get_function_instance(func_name);
+	if (IS_ERR(fi))
+		return ERR_CAST(fi);
+
+	ret = config_item_set_name(&fi->group.cg_item, "%s", name);
+	if (ret) {
+		usb_put_function_instance(fi);
+		return ERR_PTR(ret);
+	}
+	if (fi->set_inst_name) {
+		ret = fi->set_inst_name(fi, instance_name);
+		if (ret) {
+			usb_put_function_instance(fi);
+			return ERR_PTR(ret);
+		}
+	}
+
+	gi = container_of(group, struct gadget_info, functions_group);
+
+	mutex_lock(&gi->lock);
+	list_add_tail(&fi->cfs_list, &gi->available_func);
+	mutex_unlock(&gi->lock);
+	return &fi->group;
+}
+
+static void function_drop(
+		struct config_group *group,
+		struct config_item *item)
+{
+	struct usb_function_instance *fi = to_usb_function_instance(item);
+	struct gadget_info *gi;
+
+	gi = container_of(group, struct gadget_info, functions_group);
+
+	mutex_lock(&gi->lock);
+	list_del(&fi->cfs_list);
+	mutex_unlock(&gi->lock);
+	config_item_put(item);
+}
+
+static struct configfs_group_operations functions_ops = {
+	.make_group     = &function_make,
+	.drop_item      = &function_drop,
+};
+
+static const struct config_item_type functions_type = {
+	.ct_group_ops   = &functions_ops,
+	.ct_owner       = THIS_MODULE,
+};
+
+GS_STRINGS_RW(gadget_config_name, configuration);
+
+static struct configfs_attribute *gadget_config_name_langid_attrs[] = {
+	&gadget_config_name_attr_configuration,
+	NULL,
+};
+
+static void gadget_config_name_attr_release(struct config_item *item)
+{
+	struct gadget_config_name *cn = to_gadget_config_name(item);
+
+	kfree(cn->configuration);
+
+	list_del(&cn->list);
+	kfree(cn);
+}
+
+USB_CONFIG_STRING_RW_OPS(gadget_config_name);
+USB_CONFIG_STRINGS_LANG(gadget_config_name, config_usb_cfg);
+
+static struct config_group *config_desc_make(
+		struct config_group *group,
+		const char *name)
+{
+	struct gadget_info *gi;
+	struct config_usb_cfg *cfg;
+	char buf[MAX_NAME_LEN];
+	char *num_str;
+	u8 num;
+	int ret;
+
+	gi = container_of(group, struct gadget_info, configs_group);
+	ret = snprintf(buf, MAX_NAME_LEN, "%s", name);
+	if (ret >= MAX_NAME_LEN)
+		return ERR_PTR(-ENAMETOOLONG);
+
+	num_str = strchr(buf, '.');
+	if (!num_str) {
+		pr_err("Unable to locate . in name.bConfigurationValue\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	*num_str = '\0';
+	num_str++;
+
+	if (!strlen(buf))
+		return ERR_PTR(-EINVAL);
+
+	ret = kstrtou8(num_str, 0, &num);
+	if (ret)
+		return ERR_PTR(ret);
+
+	cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
+	if (!cfg)
+		return ERR_PTR(-ENOMEM);
+	cfg->c.label = kstrdup(buf, GFP_KERNEL);
+	if (!cfg->c.label) {
+		ret = -ENOMEM;
+		goto err;
+	}
+	cfg->c.bConfigurationValue = num;
+	cfg->c.MaxPower = CONFIG_USB_GADGET_VBUS_DRAW;
+	cfg->c.bmAttributes = USB_CONFIG_ATT_ONE;
+	INIT_LIST_HEAD(&cfg->string_list);
+	INIT_LIST_HEAD(&cfg->func_list);
+
+	config_group_init_type_name(&cfg->group, name,
+				&gadget_config_type);
+
+	config_group_init_type_name(&cfg->strings_group, "strings",
+			&gadget_config_name_strings_type);
+	configfs_add_default_group(&cfg->strings_group, &cfg->group);
+
+	ret = usb_add_config_only(&gi->cdev, &cfg->c);
+	if (ret)
+		goto err;
+
+	return &cfg->group;
+err:
+	kfree(cfg->c.label);
+	kfree(cfg);
+	return ERR_PTR(ret);
+}
+
+static void config_desc_drop(
+		struct config_group *group,
+		struct config_item *item)
+{
+	config_item_put(item);
+}
+
+static struct configfs_group_operations config_desc_ops = {
+	.make_group     = &config_desc_make,
+	.drop_item      = &config_desc_drop,
+};
+
+static const struct config_item_type config_desc_type = {
+	.ct_group_ops   = &config_desc_ops,
+	.ct_owner       = THIS_MODULE,
+};
+
+GS_STRINGS_RW(gadget_strings, manufacturer);
+GS_STRINGS_RW(gadget_strings, product);
+GS_STRINGS_RW(gadget_strings, serialnumber);
+
+static struct configfs_attribute *gadget_strings_langid_attrs[] = {
+	&gadget_strings_attr_manufacturer,
+	&gadget_strings_attr_product,
+	&gadget_strings_attr_serialnumber,
+	NULL,
+};
+
+static void gadget_strings_attr_release(struct config_item *item)
+{
+	struct gadget_strings *gs = to_gadget_strings(item);
+
+	kfree(gs->manufacturer);
+	kfree(gs->product);
+	kfree(gs->serialnumber);
+
+	list_del(&gs->list);
+	kfree(gs);
+}
+
+USB_CONFIG_STRING_RW_OPS(gadget_strings);
+USB_CONFIG_STRINGS_LANG(gadget_strings, gadget_info);
+
+static inline struct gadget_info *os_desc_item_to_gadget_info(
+		struct config_item *item)
+{
+	return container_of(to_config_group(item),
+			struct gadget_info, os_desc_group);
+}
+
+static ssize_t os_desc_use_show(struct config_item *item, char *page)
+{
+	return sprintf(page, "%d\n",
+			os_desc_item_to_gadget_info(item)->use_os_desc);
+}
+
+static ssize_t os_desc_use_store(struct config_item *item, const char *page,
+				 size_t len)
+{
+	struct gadget_info *gi = os_desc_item_to_gadget_info(item);
+	int ret;
+	bool use;
+
+	mutex_lock(&gi->lock);
+	ret = strtobool(page, &use);
+	if (!ret) {
+		gi->use_os_desc = use;
+		ret = len;
+	}
+	mutex_unlock(&gi->lock);
+
+	return ret;
+}
+
+static ssize_t os_desc_b_vendor_code_show(struct config_item *item, char *page)
+{
+	return sprintf(page, "0x%02x\n",
+			os_desc_item_to_gadget_info(item)->b_vendor_code);
+}
+
+static ssize_t os_desc_b_vendor_code_store(struct config_item *item,
+					   const char *page, size_t len)
+{
+	struct gadget_info *gi = os_desc_item_to_gadget_info(item);
+	int ret;
+	u8 b_vendor_code;
+
+	mutex_lock(&gi->lock);
+	ret = kstrtou8(page, 0, &b_vendor_code);
+	if (!ret) {
+		gi->b_vendor_code = b_vendor_code;
+		ret = len;
+	}
+	mutex_unlock(&gi->lock);
+
+	return ret;
+}
+
+static ssize_t os_desc_qw_sign_show(struct config_item *item, char *page)
+{
+	struct gadget_info *gi = os_desc_item_to_gadget_info(item);
+	int res;
+
+	res = utf16s_to_utf8s((wchar_t *) gi->qw_sign, OS_STRING_QW_SIGN_LEN,
+			      UTF16_LITTLE_ENDIAN, page, PAGE_SIZE - 1);
+	page[res++] = '\n';
+
+	return res;
+}
+
+static ssize_t os_desc_qw_sign_store(struct config_item *item, const char *page,
+				     size_t len)
+{
+	struct gadget_info *gi = os_desc_item_to_gadget_info(item);
+	int res, l;
+
+	l = min((int)len, OS_STRING_QW_SIGN_LEN >> 1);
+	if (page[l - 1] == '\n')
+		--l;
+
+	mutex_lock(&gi->lock);
+	res = utf8s_to_utf16s(page, l,
+			      UTF16_LITTLE_ENDIAN, (wchar_t *) gi->qw_sign,
+			      OS_STRING_QW_SIGN_LEN);
+	if (res > 0)
+		res = len;
+	mutex_unlock(&gi->lock);
+
+	return res;
+}
+
+CONFIGFS_ATTR(os_desc_, use);
+CONFIGFS_ATTR(os_desc_, b_vendor_code);
+CONFIGFS_ATTR(os_desc_, qw_sign);
+
+static struct configfs_attribute *os_desc_attrs[] = {
+	&os_desc_attr_use,
+	&os_desc_attr_b_vendor_code,
+	&os_desc_attr_qw_sign,
+	NULL,
+};
+
+static int os_desc_link(struct config_item *os_desc_ci,
+			struct config_item *usb_cfg_ci)
+{
+	struct gadget_info *gi = os_desc_item_to_gadget_info(os_desc_ci);
+	struct usb_composite_dev *cdev = &gi->cdev;
+	struct config_usb_cfg *c_target = to_config_usb_cfg(usb_cfg_ci);
+	struct usb_configuration *c = NULL, *iter;
+	int ret;
+
+	mutex_lock(&gi->lock);
+	list_for_each_entry(iter, &cdev->configs, list) {
+		if (iter != &c_target->c)
+			continue;
+		c = iter;
+		break;
+	}
+	if (!c) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (cdev->os_desc_config) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	cdev->os_desc_config = &c_target->c;
+	ret = 0;
+
+out:
+	mutex_unlock(&gi->lock);
+	return ret;
+}
+
+static void os_desc_unlink(struct config_item *os_desc_ci,
+			  struct config_item *usb_cfg_ci)
+{
+	struct gadget_info *gi = os_desc_item_to_gadget_info(os_desc_ci);
+	struct usb_composite_dev *cdev = &gi->cdev;
+
+	mutex_lock(&gi->lock);
+	if (gi->composite.gadget_driver.udc_name)
+		unregister_gadget(gi);
+	cdev->os_desc_config = NULL;
+	WARN_ON(gi->composite.gadget_driver.udc_name);
+	mutex_unlock(&gi->lock);
+}
+
+static struct configfs_item_operations os_desc_ops = {
+	.allow_link		= os_desc_link,
+	.drop_link		= os_desc_unlink,
+};
+
+static struct config_item_type os_desc_type = {
+	.ct_item_ops	= &os_desc_ops,
+	.ct_attrs	= os_desc_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static inline struct usb_os_desc_ext_prop
+*to_usb_os_desc_ext_prop(struct config_item *item)
+{
+	return container_of(item, struct usb_os_desc_ext_prop, item);
+}
+
+static ssize_t ext_prop_type_show(struct config_item *item, char *page)
+{
+	return sprintf(page, "%d\n", to_usb_os_desc_ext_prop(item)->type);
+}
+
+static ssize_t ext_prop_type_store(struct config_item *item,
+				   const char *page, size_t len)
+{
+	struct usb_os_desc_ext_prop *ext_prop = to_usb_os_desc_ext_prop(item);
+	struct usb_os_desc *desc = to_usb_os_desc(ext_prop->item.ci_parent);
+	u8 type;
+	int ret;
+
+	if (desc->opts_mutex)
+		mutex_lock(desc->opts_mutex);
+	ret = kstrtou8(page, 0, &type);
+	if (ret)
+		goto end;
+	if (type < USB_EXT_PROP_UNICODE || type > USB_EXT_PROP_UNICODE_MULTI) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	if ((ext_prop->type == USB_EXT_PROP_BINARY ||
+	    ext_prop->type == USB_EXT_PROP_LE32 ||
+	    ext_prop->type == USB_EXT_PROP_BE32) &&
+	    (type == USB_EXT_PROP_UNICODE ||
+	    type == USB_EXT_PROP_UNICODE_ENV ||
+	    type == USB_EXT_PROP_UNICODE_LINK))
+		ext_prop->data_len <<= 1;
+	else if ((ext_prop->type == USB_EXT_PROP_UNICODE ||
+		   ext_prop->type == USB_EXT_PROP_UNICODE_ENV ||
+		   ext_prop->type == USB_EXT_PROP_UNICODE_LINK) &&
+		   (type == USB_EXT_PROP_BINARY ||
+		   type == USB_EXT_PROP_LE32 ||
+		   type == USB_EXT_PROP_BE32))
+		ext_prop->data_len >>= 1;
+	ext_prop->type = type;
+	ret = len;
+
+end:
+	if (desc->opts_mutex)
+		mutex_unlock(desc->opts_mutex);
+	return ret;
+}
+
+static ssize_t ext_prop_data_show(struct config_item *item, char *page)
+{
+	struct usb_os_desc_ext_prop *ext_prop = to_usb_os_desc_ext_prop(item);
+	int len = ext_prop->data_len;
+
+	if (ext_prop->type == USB_EXT_PROP_UNICODE ||
+	    ext_prop->type == USB_EXT_PROP_UNICODE_ENV ||
+	    ext_prop->type == USB_EXT_PROP_UNICODE_LINK)
+		len >>= 1;
+	memcpy(page, ext_prop->data, len);
+
+	return len;
+}
+
+static ssize_t ext_prop_data_store(struct config_item *item,
+				   const char *page, size_t len)
+{
+	struct usb_os_desc_ext_prop *ext_prop = to_usb_os_desc_ext_prop(item);
+	struct usb_os_desc *desc = to_usb_os_desc(ext_prop->item.ci_parent);
+	char *new_data;
+	size_t ret_len = len;
+
+	if (page[len - 1] == '\n' || page[len - 1] == '\0')
+		--len;
+	new_data = kmemdup(page, len, GFP_KERNEL);
+	if (!new_data)
+		return -ENOMEM;
+
+	if (desc->opts_mutex)
+		mutex_lock(desc->opts_mutex);
+	kfree(ext_prop->data);
+	ext_prop->data = new_data;
+	desc->ext_prop_len -= ext_prop->data_len;
+	ext_prop->data_len = len;
+	desc->ext_prop_len += ext_prop->data_len;
+	if (ext_prop->type == USB_EXT_PROP_UNICODE ||
+	    ext_prop->type == USB_EXT_PROP_UNICODE_ENV ||
+	    ext_prop->type == USB_EXT_PROP_UNICODE_LINK) {
+		desc->ext_prop_len -= ext_prop->data_len;
+		ext_prop->data_len <<= 1;
+		ext_prop->data_len += 2;
+		desc->ext_prop_len += ext_prop->data_len;
+	}
+	if (desc->opts_mutex)
+		mutex_unlock(desc->opts_mutex);
+	return ret_len;
+}
+
+CONFIGFS_ATTR(ext_prop_, type);
+CONFIGFS_ATTR(ext_prop_, data);
+
+static struct configfs_attribute *ext_prop_attrs[] = {
+	&ext_prop_attr_type,
+	&ext_prop_attr_data,
+	NULL,
+};
+
+static void usb_os_desc_ext_prop_release(struct config_item *item)
+{
+	struct usb_os_desc_ext_prop *ext_prop = to_usb_os_desc_ext_prop(item);
+
+	kfree(ext_prop); /* frees a whole chunk */
+}
+
+static struct configfs_item_operations ext_prop_ops = {
+	.release		= usb_os_desc_ext_prop_release,
+};
+
+static struct config_item *ext_prop_make(
+		struct config_group *group,
+		const char *name)
+{
+	struct usb_os_desc_ext_prop *ext_prop;
+	struct config_item_type *ext_prop_type;
+	struct usb_os_desc *desc;
+	char *vlabuf;
+
+	vla_group(data_chunk);
+	vla_item(data_chunk, struct usb_os_desc_ext_prop, ext_prop, 1);
+	vla_item(data_chunk, struct config_item_type, ext_prop_type, 1);
+
+	vlabuf = kzalloc(vla_group_size(data_chunk), GFP_KERNEL);
+	if (!vlabuf)
+		return ERR_PTR(-ENOMEM);
+
+	ext_prop = vla_ptr(vlabuf, data_chunk, ext_prop);
+	ext_prop_type = vla_ptr(vlabuf, data_chunk, ext_prop_type);
+
+	desc = container_of(group, struct usb_os_desc, group);
+	ext_prop_type->ct_item_ops = &ext_prop_ops;
+	ext_prop_type->ct_attrs = ext_prop_attrs;
+	ext_prop_type->ct_owner = desc->owner;
+
+	config_item_init_type_name(&ext_prop->item, name, ext_prop_type);
+
+	ext_prop->name = kstrdup(name, GFP_KERNEL);
+	if (!ext_prop->name) {
+		kfree(vlabuf);
+		return ERR_PTR(-ENOMEM);
+	}
+	desc->ext_prop_len += 14;
+	ext_prop->name_len = 2 * strlen(ext_prop->name) + 2;
+	if (desc->opts_mutex)
+		mutex_lock(desc->opts_mutex);
+	desc->ext_prop_len += ext_prop->name_len;
+	list_add_tail(&ext_prop->entry, &desc->ext_prop);
+	++desc->ext_prop_count;
+	if (desc->opts_mutex)
+		mutex_unlock(desc->opts_mutex);
+
+	return &ext_prop->item;
+}
+
+static void ext_prop_drop(struct config_group *group, struct config_item *item)
+{
+	struct usb_os_desc_ext_prop *ext_prop = to_usb_os_desc_ext_prop(item);
+	struct usb_os_desc *desc = to_usb_os_desc(&group->cg_item);
+
+	if (desc->opts_mutex)
+		mutex_lock(desc->opts_mutex);
+	list_del(&ext_prop->entry);
+	--desc->ext_prop_count;
+	kfree(ext_prop->name);
+	desc->ext_prop_len -= (ext_prop->name_len + ext_prop->data_len + 14);
+	if (desc->opts_mutex)
+		mutex_unlock(desc->opts_mutex);
+	config_item_put(item);
+}
+
+static struct configfs_group_operations interf_grp_ops = {
+	.make_item	= &ext_prop_make,
+	.drop_item	= &ext_prop_drop,
+};
+
+static ssize_t interf_grp_compatible_id_show(struct config_item *item,
+					     char *page)
+{
+	memcpy(page, to_usb_os_desc(item)->ext_compat_id, 8);
+	return 8;
+}
+
+static ssize_t interf_grp_compatible_id_store(struct config_item *item,
+					      const char *page, size_t len)
+{
+	struct usb_os_desc *desc = to_usb_os_desc(item);
+	int l;
+
+	l = min_t(int, 8, len);
+	if (page[l - 1] == '\n')
+		--l;
+	if (desc->opts_mutex)
+		mutex_lock(desc->opts_mutex);
+	memcpy(desc->ext_compat_id, page, l);
+
+	if (desc->opts_mutex)
+		mutex_unlock(desc->opts_mutex);
+
+	return len;
+}
+
+static ssize_t interf_grp_sub_compatible_id_show(struct config_item *item,
+						 char *page)
+{
+	memcpy(page, to_usb_os_desc(item)->ext_compat_id + 8, 8);
+	return 8;
+}
+
+static ssize_t interf_grp_sub_compatible_id_store(struct config_item *item,
+						  const char *page, size_t len)
+{
+	struct usb_os_desc *desc = to_usb_os_desc(item);
+	int l;
+
+	l = min_t(int, 8, len);
+	if (page[l - 1] == '\n')
+		--l;
+	if (desc->opts_mutex)
+		mutex_lock(desc->opts_mutex);
+	memcpy(desc->ext_compat_id + 8, page, l);
+
+	if (desc->opts_mutex)
+		mutex_unlock(desc->opts_mutex);
+
+	return len;
+}
+
+CONFIGFS_ATTR(interf_grp_, compatible_id);
+CONFIGFS_ATTR(interf_grp_, sub_compatible_id);
+
+static struct configfs_attribute *interf_grp_attrs[] = {
+	&interf_grp_attr_compatible_id,
+	&interf_grp_attr_sub_compatible_id,
+	NULL
+};
+
+struct config_group *usb_os_desc_prepare_interf_dir(
+		struct config_group *parent,
+		int n_interf,
+		struct usb_os_desc **desc,
+		char **names,
+		struct module *owner)
+{
+	struct config_group *os_desc_group;
+	struct config_item_type *os_desc_type, *interface_type;
+
+	vla_group(data_chunk);
+	vla_item(data_chunk, struct config_group, os_desc_group, 1);
+	vla_item(data_chunk, struct config_item_type, os_desc_type, 1);
+	vla_item(data_chunk, struct config_item_type, interface_type, 1);
+
+	char *vlabuf = kzalloc(vla_group_size(data_chunk), GFP_KERNEL);
+	if (!vlabuf)
+		return ERR_PTR(-ENOMEM);
+
+	os_desc_group = vla_ptr(vlabuf, data_chunk, os_desc_group);
+	os_desc_type = vla_ptr(vlabuf, data_chunk, os_desc_type);
+	interface_type = vla_ptr(vlabuf, data_chunk, interface_type);
+
+	os_desc_type->ct_owner = owner;
+	config_group_init_type_name(os_desc_group, "os_desc", os_desc_type);
+	configfs_add_default_group(os_desc_group, parent);
+
+	interface_type->ct_group_ops = &interf_grp_ops;
+	interface_type->ct_attrs = interf_grp_attrs;
+	interface_type->ct_owner = owner;
+
+	while (n_interf--) {
+		struct usb_os_desc *d;
+
+		d = desc[n_interf];
+		d->owner = owner;
+		config_group_init_type_name(&d->group, "", interface_type);
+		config_item_set_name(&d->group.cg_item, "interface.%s",
+				     names[n_interf]);
+		configfs_add_default_group(&d->group, os_desc_group);
+	}
+
+	return os_desc_group;
+}
+EXPORT_SYMBOL(usb_os_desc_prepare_interf_dir);
+
+static int configfs_do_nothing(struct usb_composite_dev *cdev)
+{
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+int composite_dev_prepare(struct usb_composite_driver *composite,
+		struct usb_composite_dev *dev);
+
+int composite_os_desc_req_prepare(struct usb_composite_dev *cdev,
+				  struct usb_ep *ep0);
+
+static void purge_configs_funcs(struct gadget_info *gi)
+{
+	struct usb_configuration	*c;
+
+	list_for_each_entry(c, &gi->cdev.configs, list) {
+		struct usb_function *f, *tmp;
+		struct config_usb_cfg *cfg;
+
+		cfg = container_of(c, struct config_usb_cfg, c);
+
+		list_for_each_entry_safe_reverse(f, tmp, &c->functions, list) {
+
+			list_move(&f->list, &cfg->func_list);
+			if (f->unbind) {
+				dev_dbg(&gi->cdev.gadget->dev,
+					"unbind function '%s'/%p\n",
+					f->name, f);
+				f->unbind(c, f);
+			}
+		}
+		c->next_interface_id = 0;
+		memset(c->interface, 0, sizeof(c->interface));
+		c->superspeed_plus = 0;
+		c->superspeed = 0;
+		c->highspeed = 0;
+		c->fullspeed = 0;
+	}
+}
+
+static int configfs_composite_bind(struct usb_gadget *gadget,
+		struct usb_gadget_driver *gdriver)
+{
+	struct usb_composite_driver     *composite = to_cdriver(gdriver);
+	struct gadget_info		*gi = container_of(composite,
+						struct gadget_info, composite);
+	struct usb_composite_dev	*cdev = &gi->cdev;
+	struct usb_configuration	*c;
+	struct usb_string		*s;
+	unsigned			i;
+	int				ret;
+
+	/* the gi->lock is hold by the caller */
+	gi->unbind = 0;
+	cdev->gadget = gadget;
+	set_gadget_data(gadget, cdev);
+	ret = composite_dev_prepare(composite, cdev);
+	if (ret)
+		return ret;
+	/* and now the gadget bind */
+	ret = -EINVAL;
+
+	if (list_empty(&gi->cdev.configs)) {
+		pr_err("Need at least one configuration in %s.\n",
+				gi->composite.name);
+		goto err_comp_cleanup;
+	}
+
+
+	list_for_each_entry(c, &gi->cdev.configs, list) {
+		struct config_usb_cfg *cfg;
+
+		cfg = container_of(c, struct config_usb_cfg, c);
+		if (list_empty(&cfg->func_list)) {
+			pr_err("Config %s/%d of %s needs at least one function.\n",
+			      c->label, c->bConfigurationValue,
+			      gi->composite.name);
+			goto err_comp_cleanup;
+		}
+	}
+
+	/* init all strings */
+	if (!list_empty(&gi->string_list)) {
+		struct gadget_strings *gs;
+
+		i = 0;
+		list_for_each_entry(gs, &gi->string_list, list) {
+
+			gi->gstrings[i] = &gs->stringtab_dev;
+			gs->stringtab_dev.strings = gs->strings;
+			gs->strings[USB_GADGET_MANUFACTURER_IDX].s =
+				gs->manufacturer;
+			gs->strings[USB_GADGET_PRODUCT_IDX].s = gs->product;
+			gs->strings[USB_GADGET_SERIAL_IDX].s = gs->serialnumber;
+			i++;
+		}
+		gi->gstrings[i] = NULL;
+		s = usb_gstrings_attach(&gi->cdev, gi->gstrings,
+				USB_GADGET_FIRST_AVAIL_IDX);
+		if (IS_ERR(s)) {
+			ret = PTR_ERR(s);
+			goto err_comp_cleanup;
+		}
+
+		gi->cdev.desc.iManufacturer = s[USB_GADGET_MANUFACTURER_IDX].id;
+		gi->cdev.desc.iProduct = s[USB_GADGET_PRODUCT_IDX].id;
+		gi->cdev.desc.iSerialNumber = s[USB_GADGET_SERIAL_IDX].id;
+	}
+
+	if (gi->use_os_desc) {
+		cdev->use_os_string = true;
+		cdev->b_vendor_code = gi->b_vendor_code;
+		memcpy(cdev->qw_sign, gi->qw_sign, OS_STRING_QW_SIGN_LEN);
+	}
+
+	if (gadget_is_otg(gadget) && !otg_desc[0]) {
+		struct usb_descriptor_header *usb_desc;
+
+		usb_desc = usb_otg_descriptor_alloc(gadget);
+		if (!usb_desc) {
+			ret = -ENOMEM;
+			goto err_comp_cleanup;
+		}
+		usb_otg_descriptor_init(gadget, usb_desc);
+		otg_desc[0] = usb_desc;
+		otg_desc[1] = NULL;
+	}
+
+	/* Go through all configs, attach all functions */
+	list_for_each_entry(c, &gi->cdev.configs, list) {
+		struct config_usb_cfg *cfg;
+		struct usb_function *f;
+		struct usb_function *tmp;
+		struct gadget_config_name *cn;
+
+		if (gadget_is_otg(gadget))
+			c->descriptors = otg_desc;
+
+		cfg = container_of(c, struct config_usb_cfg, c);
+		if (!list_empty(&cfg->string_list)) {
+			i = 0;
+			list_for_each_entry(cn, &cfg->string_list, list) {
+				cfg->gstrings[i] = &cn->stringtab_dev;
+				cn->stringtab_dev.strings = &cn->strings;
+				cn->strings.s = cn->configuration;
+				i++;
+			}
+			cfg->gstrings[i] = NULL;
+			s = usb_gstrings_attach(&gi->cdev, cfg->gstrings, 1);
+			if (IS_ERR(s)) {
+				ret = PTR_ERR(s);
+				goto err_comp_cleanup;
+			}
+			c->iConfiguration = s[0].id;
+		}
+
+		list_for_each_entry_safe(f, tmp, &cfg->func_list, list) {
+			list_del(&f->list);
+			ret = usb_add_function(c, f);
+			if (ret) {
+				list_add(&f->list, &cfg->func_list);
+				goto err_purge_funcs;
+			}
+		}
+		ret = usb_gadget_check_config(cdev->gadget);
+		if (ret)
+			goto err_purge_funcs;
+
+		usb_ep_autoconfig_reset(cdev->gadget);
+	}
+	if (cdev->use_os_string) {
+		ret = composite_os_desc_req_prepare(cdev, gadget->ep0);
+		if (ret)
+			goto err_purge_funcs;
+	}
+
+	usb_ep_autoconfig_reset(cdev->gadget);
+	return 0;
+
+err_purge_funcs:
+	purge_configs_funcs(gi);
+err_comp_cleanup:
+	composite_dev_cleanup(cdev);
+	return ret;
+}
+
+static void configfs_composite_unbind(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev	*cdev;
+	struct gadget_info		*gi;
+	unsigned long flags;
+
+	/* the gi->lock is hold by the caller */
+
+	cdev = get_gadget_data(gadget);
+	gi = container_of(cdev, struct gadget_info, cdev);
+	spin_lock_irqsave(&gi->spinlock, flags);
+	gi->unbind = 1;
+	spin_unlock_irqrestore(&gi->spinlock, flags);
+
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+	purge_configs_funcs(gi);
+	composite_dev_cleanup(cdev);
+	usb_ep_autoconfig_reset(cdev->gadget);
+	spin_lock_irqsave(&gi->spinlock, flags);
+	cdev->gadget = NULL;
+	cdev->deactivations = 0;
+	gadget->deactivated = false;
+	set_gadget_data(gadget, NULL);
+	spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static int configfs_composite_setup(struct usb_gadget *gadget,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev *cdev;
+	struct gadget_info *gi;
+	unsigned long flags;
+	int ret;
+
+	cdev = get_gadget_data(gadget);
+	if (!cdev)
+		return 0;
+
+	gi = container_of(cdev, struct gadget_info, cdev);
+	spin_lock_irqsave(&gi->spinlock, flags);
+	cdev = get_gadget_data(gadget);
+	if (!cdev || gi->unbind) {
+		spin_unlock_irqrestore(&gi->spinlock, flags);
+		return 0;
+	}
+
+	ret = composite_setup(gadget, ctrl);
+	spin_unlock_irqrestore(&gi->spinlock, flags);
+	return ret;
+}
+
+static void configfs_composite_disconnect(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev *cdev;
+	struct gadget_info *gi;
+	unsigned long flags;
+
+	cdev = get_gadget_data(gadget);
+	if (!cdev)
+		return;
+
+	gi = container_of(cdev, struct gadget_info, cdev);
+	spin_lock_irqsave(&gi->spinlock, flags);
+	cdev = get_gadget_data(gadget);
+	if (!cdev || gi->unbind) {
+		spin_unlock_irqrestore(&gi->spinlock, flags);
+		return;
+	}
+
+	composite_disconnect(gadget);
+	spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static void configfs_composite_reset(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev *cdev;
+	struct gadget_info *gi;
+	unsigned long flags;
+
+	cdev = get_gadget_data(gadget);
+	if (!cdev)
+		return;
+
+	gi = container_of(cdev, struct gadget_info, cdev);
+	spin_lock_irqsave(&gi->spinlock, flags);
+	cdev = get_gadget_data(gadget);
+	if (!cdev || gi->unbind) {
+		spin_unlock_irqrestore(&gi->spinlock, flags);
+		return;
+	}
+
+	composite_reset(gadget);
+	spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static void configfs_composite_suspend(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev *cdev;
+	struct gadget_info *gi;
+	unsigned long flags;
+
+	cdev = get_gadget_data(gadget);
+	if (!cdev)
+		return;
+
+	gi = container_of(cdev, struct gadget_info, cdev);
+	spin_lock_irqsave(&gi->spinlock, flags);
+	cdev = get_gadget_data(gadget);
+	if (!cdev || gi->unbind) {
+		spin_unlock_irqrestore(&gi->spinlock, flags);
+		return;
+	}
+
+	composite_suspend(gadget);
+	spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static void configfs_composite_resume(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev *cdev;
+	struct gadget_info *gi;
+	unsigned long flags;
+
+	cdev = get_gadget_data(gadget);
+	if (!cdev)
+		return;
+
+	gi = container_of(cdev, struct gadget_info, cdev);
+	spin_lock_irqsave(&gi->spinlock, flags);
+	cdev = get_gadget_data(gadget);
+	if (!cdev || gi->unbind) {
+		spin_unlock_irqrestore(&gi->spinlock, flags);
+		return;
+	}
+
+	composite_resume(gadget);
+	spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static const struct usb_gadget_driver configfs_driver_template = {
+	.bind           = configfs_composite_bind,
+	.unbind         = configfs_composite_unbind,
+
+	.setup          = configfs_composite_setup,
+	.reset          = configfs_composite_reset,
+	.disconnect     = configfs_composite_disconnect,
+
+	.suspend	= configfs_composite_suspend,
+	.resume		= configfs_composite_resume,
+
+	.max_speed	= USB_SPEED_SUPER_PLUS,
+	.driver = {
+		.owner          = THIS_MODULE,
+	},
+	.match_existing_only = 1,
+};
+
+static struct config_group *gadgets_make(
+		struct config_group *group,
+		const char *name)
+{
+	struct gadget_info *gi;
+
+	gi = kzalloc(sizeof(*gi), GFP_KERNEL);
+	if (!gi)
+		return ERR_PTR(-ENOMEM);
+
+	config_group_init_type_name(&gi->group, name, &gadget_root_type);
+
+	config_group_init_type_name(&gi->functions_group, "functions",
+			&functions_type);
+	configfs_add_default_group(&gi->functions_group, &gi->group);
+
+	config_group_init_type_name(&gi->configs_group, "configs",
+			&config_desc_type);
+	configfs_add_default_group(&gi->configs_group, &gi->group);
+
+	config_group_init_type_name(&gi->strings_group, "strings",
+			&gadget_strings_strings_type);
+	configfs_add_default_group(&gi->strings_group, &gi->group);
+
+	config_group_init_type_name(&gi->os_desc_group, "os_desc",
+			&os_desc_type);
+	configfs_add_default_group(&gi->os_desc_group, &gi->group);
+
+	gi->composite.bind = configfs_do_nothing;
+	gi->composite.unbind = configfs_do_nothing;
+	gi->composite.suspend = NULL;
+	gi->composite.resume = NULL;
+	gi->composite.max_speed = USB_SPEED_SUPER_PLUS;
+
+	spin_lock_init(&gi->spinlock);
+	mutex_init(&gi->lock);
+	INIT_LIST_HEAD(&gi->string_list);
+	INIT_LIST_HEAD(&gi->available_func);
+
+	composite_init_dev(&gi->cdev);
+	gi->cdev.desc.bLength = USB_DT_DEVICE_SIZE;
+	gi->cdev.desc.bDescriptorType = USB_DT_DEVICE;
+	gi->cdev.desc.bcdDevice = cpu_to_le16(get_default_bcdDevice());
+
+	gi->composite.gadget_driver = configfs_driver_template;
+
+	gi->composite.gadget_driver.driver.name = kasprintf(GFP_KERNEL,
+							    "configfs-gadget.%s", name);
+	if (!gi->composite.gadget_driver.driver.name)
+		goto err;
+
+	gi->composite.gadget_driver.function = kstrdup(name, GFP_KERNEL);
+	gi->composite.name = gi->composite.gadget_driver.function;
+
+	if (!gi->composite.gadget_driver.function)
+		goto out_free_driver_name;
+
+	return &gi->group;
+
+out_free_driver_name:
+	kfree(gi->composite.gadget_driver.driver.name);
+err:
+	kfree(gi);
+	return ERR_PTR(-ENOMEM);
+}
+
+static void gadgets_drop(struct config_group *group, struct config_item *item)
+{
+	config_item_put(item);
+}
+
+static struct configfs_group_operations gadgets_ops = {
+	.make_group     = &gadgets_make,
+	.drop_item      = &gadgets_drop,
+};
+
+static const struct config_item_type gadgets_type = {
+	.ct_group_ops   = &gadgets_ops,
+	.ct_owner       = THIS_MODULE,
+};
+
+static struct configfs_subsystem gadget_subsys = {
+	.su_group = {
+		.cg_item = {
+			.ci_namebuf = "usb_gadget",
+			.ci_type = &gadgets_type,
+		},
+	},
+	.su_mutex = __MUTEX_INITIALIZER(gadget_subsys.su_mutex),
+};
+
+void unregister_gadget_item(struct config_item *item)
+{
+	struct gadget_info *gi = to_gadget_info(item);
+
+	mutex_lock(&gi->lock);
+	unregister_gadget(gi);
+	mutex_unlock(&gi->lock);
+}
+EXPORT_SYMBOL_GPL(unregister_gadget_item);
+
+static int __init gadget_cfs_init(void)
+{
+	int ret;
+
+	config_group_init(&gadget_subsys.su_group);
+
+	ret = configfs_register_subsystem(&gadget_subsys);
+	return ret;
+}
+module_init(gadget_cfs_init);
+
+static void __exit gadget_cfs_exit(void)
+{
+	configfs_unregister_subsystem(&gadget_subsys);
+}
+module_exit(gadget_cfs_exit);
diff --git a/drivers/usb/gadget/configfs.h b/drivers/usb/gadget/configfs.h
new file mode 100644
index 000000000..3b6f5298b
--- /dev/null
+++ b/drivers/usb/gadget/configfs.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef USB__GADGET__CONFIGFS__H
+#define USB__GADGET__CONFIGFS__H
+
+#include <linux/configfs.h>
+
+void unregister_gadget_item(struct config_item *item);
+
+struct config_group *usb_os_desc_prepare_interf_dir(
+		struct config_group *parent,
+		int n_interf,
+		struct usb_os_desc **desc,
+		char **names,
+		struct module *owner);
+
+static inline struct usb_os_desc *to_usb_os_desc(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct usb_os_desc, group);
+}
+
+#endif /*  USB__GADGET__CONFIGFS__H */
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
new file mode 100644
index 000000000..ed5a92c47
--- /dev/null
+++ b/drivers/usb/gadget/epautoconf.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * epautoconf.c -- endpoint autoconfiguration for usb gadget drivers
+ *
+ * Copyright (C) 2004 David Brownell
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/device.h>
+
+#include <linux/ctype.h>
+#include <linux/string.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/**
+ * usb_ep_autoconfig_ss() - choose an endpoint matching the ep
+ * descriptor and ep companion descriptor
+ * @gadget: The device to which the endpoint must belong.
+ * @desc: Endpoint descriptor, with endpoint direction and transfer mode
+ *    initialized.  For periodic transfers, the maximum packet
+ *    size must also be initialized.  This is modified on
+ *    success.
+ * @ep_comp: Endpoint companion descriptor, with the required
+ *    number of streams. Will be modified when the chosen EP
+ *    supports a different number of streams.
+ *
+ * This routine replaces the usb_ep_autoconfig when needed
+ * superspeed enhancments. If such enhancemnets are required,
+ * the FD should call usb_ep_autoconfig_ss directly and provide
+ * the additional ep_comp parameter.
+ *
+ * By choosing an endpoint to use with the specified descriptor,
+ * this routine simplifies writing gadget drivers that work with
+ * multiple USB device controllers.  The endpoint would be
+ * passed later to usb_ep_enable(), along with some descriptor.
+ *
+ * That second descriptor won't always be the same as the first one.
+ * For example, isochronous endpoints can be autoconfigured for high
+ * bandwidth, and then used in several lower bandwidth altsettings.
+ * Also, high and full speed descriptors will be different.
+ *
+ * Be sure to examine and test the results of autoconfiguration
+ * on your hardware.  This code may not make the best choices
+ * about how to use the USB controller, and it can't know all
+ * the restrictions that may apply. Some combinations of driver
+ * and hardware won't be able to autoconfigure.
+ *
+ * On success, this returns an claimed usb_ep, and modifies the endpoint
+ * descriptor bEndpointAddress.  For bulk endpoints, the wMaxPacket value
+ * is initialized as if the endpoint were used at full speed and
+ * the bmAttribute field in the ep companion descriptor is
+ * updated with the assigned number of streams if it is
+ * different from the original value. To prevent the endpoint
+ * from being returned by a later autoconfig call, claims it by
+ * assigning ep->claimed to true.
+ *
+ * On failure, this returns a null endpoint descriptor.
+ */
+struct usb_ep *usb_ep_autoconfig_ss(
+	struct usb_gadget		*gadget,
+	struct usb_endpoint_descriptor	*desc,
+	struct usb_ss_ep_comp_descriptor *ep_comp
+)
+{
+	struct usb_ep	*ep;
+
+	if (gadget->ops->match_ep) {
+		ep = gadget->ops->match_ep(gadget, desc, ep_comp);
+		if (ep)
+			goto found_ep;
+	}
+
+	/* Second, look at endpoints until an unclaimed one looks usable */
+	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
+		if (usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
+			goto found_ep;
+	}
+
+	/* Fail */
+	return NULL;
+found_ep:
+
+	/*
+	 * If the protocol driver hasn't yet decided on wMaxPacketSize
+	 * and wants to know the maximum possible, provide the info.
+	 */
+	if (desc->wMaxPacketSize == 0)
+		desc->wMaxPacketSize = cpu_to_le16(ep->maxpacket_limit);
+
+	/* report address */
+	desc->bEndpointAddress &= USB_DIR_IN;
+	if (isdigit(ep->name[2])) {
+		u8 num = simple_strtoul(&ep->name[2], NULL, 10);
+		desc->bEndpointAddress |= num;
+	} else if (desc->bEndpointAddress & USB_DIR_IN) {
+		if (++gadget->in_epnum > 15)
+			return NULL;
+		desc->bEndpointAddress = USB_DIR_IN | gadget->in_epnum;
+	} else {
+		if (++gadget->out_epnum > 15)
+			return NULL;
+		desc->bEndpointAddress |= gadget->out_epnum;
+	}
+
+	ep->address = desc->bEndpointAddress;
+	ep->desc = NULL;
+	ep->comp_desc = NULL;
+	ep->claimed = true;
+	return ep;
+}
+EXPORT_SYMBOL_GPL(usb_ep_autoconfig_ss);
+
+/**
+ * usb_ep_autoconfig() - choose an endpoint matching the
+ * descriptor
+ * @gadget: The device to which the endpoint must belong.
+ * @desc: Endpoint descriptor, with endpoint direction and transfer mode
+ *	initialized.  For periodic transfers, the maximum packet
+ *	size must also be initialized.  This is modified on success.
+ *
+ * By choosing an endpoint to use with the specified descriptor, this
+ * routine simplifies writing gadget drivers that work with multiple
+ * USB device controllers.  The endpoint would be passed later to
+ * usb_ep_enable(), along with some descriptor.
+ *
+ * That second descriptor won't always be the same as the first one.
+ * For example, isochronous endpoints can be autoconfigured for high
+ * bandwidth, and then used in several lower bandwidth altsettings.
+ * Also, high and full speed descriptors will be different.
+ *
+ * Be sure to examine and test the results of autoconfiguration on your
+ * hardware.  This code may not make the best choices about how to use the
+ * USB controller, and it can't know all the restrictions that may apply.
+ * Some combinations of driver and hardware won't be able to autoconfigure.
+ *
+ * On success, this returns an claimed usb_ep, and modifies the endpoint
+ * descriptor bEndpointAddress.  For bulk endpoints, the wMaxPacket value
+ * is initialized as if the endpoint were used at full speed. Because of
+ * that the users must consider adjusting the autoconfigured descriptor.
+ * To prevent the endpoint from being returned by a later autoconfig call,
+ * claims it by assigning ep->claimed to true.
+ *
+ * On failure, this returns a null endpoint descriptor.
+ */
+struct usb_ep *usb_ep_autoconfig(
+	struct usb_gadget		*gadget,
+	struct usb_endpoint_descriptor	*desc
+)
+{
+	struct usb_ep	*ep;
+	u8		type;
+
+	ep = usb_ep_autoconfig_ss(gadget, desc, NULL);
+	if (!ep)
+		return NULL;
+
+	type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+	/* report (variable) full speed bulk maxpacket */
+	if (type == USB_ENDPOINT_XFER_BULK) {
+		int size = ep->maxpacket_limit;
+
+		/* min() doesn't work on bitfields with gcc-3.5 */
+		if (size > 64)
+			size = 64;
+		desc->wMaxPacketSize = cpu_to_le16(size);
+	}
+
+	return ep;
+}
+EXPORT_SYMBOL_GPL(usb_ep_autoconfig);
+
+/**
+ * usb_ep_autoconfig_release - releases endpoint and set it to initial state
+ * @ep: endpoint which should be released
+ *
+ * This function can be used during function bind for endpoints obtained
+ * from usb_ep_autoconfig(). It unclaims endpoint claimed by
+ * usb_ep_autoconfig() to make it available for other functions. Endpoint
+ * which was released is no longer valid and shouldn't be used in
+ * context of function which released it.
+ */
+void usb_ep_autoconfig_release(struct usb_ep *ep)
+{
+	ep->claimed = false;
+	ep->driver_data = NULL;
+}
+EXPORT_SYMBOL_GPL(usb_ep_autoconfig_release);
+
+/**
+ * usb_ep_autoconfig_reset - reset endpoint autoconfig state
+ * @gadget: device for which autoconfig state will be reset
+ *
+ * Use this for devices where one configuration may need to assign
+ * endpoint resources very differently from the next one.  It clears
+ * state such as ep->claimed and the record of assigned endpoints
+ * used by usb_ep_autoconfig().
+ */
+void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
+{
+	struct usb_ep	*ep;
+
+	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
+		ep->claimed = false;
+		ep->driver_data = NULL;
+	}
+	gadget->in_epnum = 0;
+	gadget->out_epnum = 0;
+}
+EXPORT_SYMBOL_GPL(usb_ep_autoconfig_reset);
diff --git a/drivers/usb/gadget/function/Makefile b/drivers/usb/gadget/function/Makefile
new file mode 100644
index 000000000..5d3a6cf02
--- /dev/null
+++ b/drivers/usb/gadget/function/Makefile
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB peripheral controller drivers
+#
+
+ccflags-y			:= -I$(srctree)/drivers/usb/gadget/
+ccflags-y			+= -I$(srctree)/drivers/usb/gadget/udc/
+
+# USB Functions
+usb_f_acm-y			:= f_acm.o
+obj-$(CONFIG_USB_F_ACM)		+= usb_f_acm.o
+usb_f_ss_lb-y			:= f_loopback.o f_sourcesink.o
+obj-$(CONFIG_USB_F_SS_LB)	+= usb_f_ss_lb.o
+obj-$(CONFIG_USB_U_SERIAL)	+= u_serial.o
+usb_f_serial-y			:= f_serial.o
+obj-$(CONFIG_USB_F_SERIAL)	+= usb_f_serial.o
+usb_f_obex-y			:= f_obex.o
+obj-$(CONFIG_USB_F_OBEX)	+= usb_f_obex.o
+obj-$(CONFIG_USB_U_ETHER)	+= u_ether.o
+usb_f_ncm-y			:= f_ncm.o
+obj-$(CONFIG_USB_F_NCM)		+= usb_f_ncm.o
+usb_f_ecm-y			:= f_ecm.o
+obj-$(CONFIG_USB_F_ECM)		+= usb_f_ecm.o
+usb_f_phonet-y			:= f_phonet.o
+obj-$(CONFIG_USB_F_PHONET)	+= usb_f_phonet.o
+usb_f_eem-y			:= f_eem.o
+obj-$(CONFIG_USB_F_EEM)		+= usb_f_eem.o
+usb_f_ecm_subset-y		:= f_subset.o
+obj-$(CONFIG_USB_F_SUBSET)	+= usb_f_ecm_subset.o
+usb_f_rndis-y			:= f_rndis.o rndis.o
+obj-$(CONFIG_USB_F_RNDIS)	+= usb_f_rndis.o
+usb_f_mass_storage-y		:= f_mass_storage.o storage_common.o
+obj-$(CONFIG_USB_F_MASS_STORAGE)+= usb_f_mass_storage.o
+usb_f_fs-y			:= f_fs.o
+obj-$(CONFIG_USB_F_FS)		+= usb_f_fs.o
+obj-$(CONFIG_USB_U_AUDIO)	+= u_audio.o
+usb_f_uac1-y			:= f_uac1.o
+obj-$(CONFIG_USB_F_UAC1)	+= usb_f_uac1.o
+usb_f_uac1_legacy-y		:= f_uac1_legacy.o u_uac1_legacy.o
+obj-$(CONFIG_USB_F_UAC1_LEGACY)	+= usb_f_uac1_legacy.o
+usb_f_uac2-y			:= f_uac2.o
+obj-$(CONFIG_USB_F_UAC2)	+= usb_f_uac2.o
+usb_f_uvc-y			:= f_uvc.o uvc_queue.o uvc_v4l2.o uvc_video.o uvc_configfs.o
+obj-$(CONFIG_USB_F_UVC)		+= usb_f_uvc.o
+usb_f_midi-y			:= f_midi.o
+obj-$(CONFIG_USB_F_MIDI)	+= usb_f_midi.o
+usb_f_hid-y			:= f_hid.o
+obj-$(CONFIG_USB_F_HID)		+= usb_f_hid.o
+usb_f_printer-y			:= f_printer.o
+obj-$(CONFIG_USB_F_PRINTER)	+= usb_f_printer.o
+usb_f_tcm-y			:= f_tcm.o
+obj-$(CONFIG_USB_F_TCM)		+= usb_f_tcm.o
diff --git a/drivers/usb/gadget/function/f_acm.c b/drivers/usb/gadget/function/f_acm.c
new file mode 100644
index 000000000..cb523f118
--- /dev/null
+++ b/drivers/usb/gadget/function/f_acm.c
@@ -0,0 +1,859 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_acm.c -- USB CDC serial (ACM) function driver
+ *
+ * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
+ * Copyright (C) 2008 by David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ * Copyright (C) 2009 by Samsung Electronics
+ * Author: Michal Nazarewicz (mina86@mina86.com)
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/err.h>
+
+#include "u_serial.h"
+
+
+/*
+ * This CDC ACM function support just wraps control functions and
+ * notifications around the generic serial-over-usb code.
+ *
+ * Because CDC ACM is standardized by the USB-IF, many host operating
+ * systems have drivers for it.  Accordingly, ACM is the preferred
+ * interop solution for serial-port type connections.  The control
+ * models are often not necessary, and in any case don't do much in
+ * this bare-bones implementation.
+ *
+ * Note that even MS-Windows has some support for ACM.  However, that
+ * support is somewhat broken because when you use ACM in a composite
+ * device, having multiple interfaces confuses the poor OS.  It doesn't
+ * seem to understand CDC Union descriptors.  The new "association"
+ * descriptors (roughly equivalent to CDC Unions) may sometimes help.
+ */
+
+struct f_acm {
+	struct gserial			port;
+	u8				ctrl_id, data_id;
+	u8				port_num;
+
+	u8				pending;
+
+	/* lock is mostly for pending and notify_req ... they get accessed
+	 * by callbacks both from tty (open/close/break) under its spinlock,
+	 * and notify_req.complete() which can't use that lock.
+	 */
+	spinlock_t			lock;
+
+	struct usb_ep			*notify;
+	struct usb_request		*notify_req;
+
+	struct usb_cdc_line_coding	port_line_coding;	/* 8-N-1 etc */
+
+	/* SetControlLineState request -- CDC 1.1 section 6.2.14 (INPUT) */
+	u16				port_handshake_bits;
+	/* SerialState notification -- CDC 1.1 section 6.3.5 (OUTPUT) */
+	u16				serial_state;
+};
+
+static inline struct f_acm *func_to_acm(struct usb_function *f)
+{
+	return container_of(f, struct f_acm, port.func);
+}
+
+static inline struct f_acm *port_to_acm(struct gserial *p)
+{
+	return container_of(p, struct f_acm, port);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* notification endpoint uses smallish and infrequent fixed-size messages */
+
+#define GS_NOTIFY_INTERVAL_MS		32
+#define GS_NOTIFY_MAXPACKET		10	/* notification + 2 bytes */
+
+/* interface and class descriptors: */
+
+static struct usb_interface_assoc_descriptor
+acm_iad_descriptor = {
+	.bLength =		sizeof acm_iad_descriptor,
+	.bDescriptorType =	USB_DT_INTERFACE_ASSOCIATION,
+
+	/* .bFirstInterface =	DYNAMIC, */
+	.bInterfaceCount = 	2,	// control + data
+	.bFunctionClass =	USB_CLASS_COMM,
+	.bFunctionSubClass =	USB_CDC_SUBCLASS_ACM,
+	.bFunctionProtocol =	USB_CDC_ACM_PROTO_AT_V25TER,
+	/* .iFunction =		DYNAMIC */
+};
+
+
+static struct usb_interface_descriptor acm_control_interface_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	/* .bInterfaceNumber = DYNAMIC */
+	.bNumEndpoints =	1,
+	.bInterfaceClass =	USB_CLASS_COMM,
+	.bInterfaceSubClass =	USB_CDC_SUBCLASS_ACM,
+	.bInterfaceProtocol =	USB_CDC_ACM_PROTO_AT_V25TER,
+	/* .iInterface = DYNAMIC */
+};
+
+static struct usb_interface_descriptor acm_data_interface_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	/* .bInterfaceNumber = DYNAMIC */
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_CDC_DATA,
+	.bInterfaceSubClass =	0,
+	.bInterfaceProtocol =	0,
+	/* .iInterface = DYNAMIC */
+};
+
+static struct usb_cdc_header_desc acm_header_desc = {
+	.bLength =		sizeof(acm_header_desc),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
+	.bcdCDC =		cpu_to_le16(0x0110),
+};
+
+static struct usb_cdc_call_mgmt_descriptor
+acm_call_mgmt_descriptor = {
+	.bLength =		sizeof(acm_call_mgmt_descriptor),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_CALL_MANAGEMENT_TYPE,
+	.bmCapabilities =	0,
+	/* .bDataInterface = DYNAMIC */
+};
+
+static struct usb_cdc_acm_descriptor acm_descriptor = {
+	.bLength =		sizeof(acm_descriptor),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_ACM_TYPE,
+	.bmCapabilities =	USB_CDC_CAP_LINE,
+};
+
+static struct usb_cdc_union_desc acm_union_desc = {
+	.bLength =		sizeof(acm_union_desc),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_UNION_TYPE,
+	/* .bMasterInterface0 =	DYNAMIC */
+	/* .bSlaveInterface0 =	DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor acm_fs_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(GS_NOTIFY_MAXPACKET),
+	.bInterval =		GS_NOTIFY_INTERVAL_MS,
+};
+
+static struct usb_endpoint_descriptor acm_fs_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor acm_fs_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *acm_fs_function[] = {
+	(struct usb_descriptor_header *) &acm_iad_descriptor,
+	(struct usb_descriptor_header *) &acm_control_interface_desc,
+	(struct usb_descriptor_header *) &acm_header_desc,
+	(struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
+	(struct usb_descriptor_header *) &acm_descriptor,
+	(struct usb_descriptor_header *) &acm_union_desc,
+	(struct usb_descriptor_header *) &acm_fs_notify_desc,
+	(struct usb_descriptor_header *) &acm_data_interface_desc,
+	(struct usb_descriptor_header *) &acm_fs_in_desc,
+	(struct usb_descriptor_header *) &acm_fs_out_desc,
+	NULL,
+};
+
+/* high speed support: */
+static struct usb_endpoint_descriptor acm_hs_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(GS_NOTIFY_MAXPACKET),
+	.bInterval =		USB_MS_TO_HS_INTERVAL(GS_NOTIFY_INTERVAL_MS),
+};
+
+static struct usb_endpoint_descriptor acm_hs_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor acm_hs_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *acm_hs_function[] = {
+	(struct usb_descriptor_header *) &acm_iad_descriptor,
+	(struct usb_descriptor_header *) &acm_control_interface_desc,
+	(struct usb_descriptor_header *) &acm_header_desc,
+	(struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
+	(struct usb_descriptor_header *) &acm_descriptor,
+	(struct usb_descriptor_header *) &acm_union_desc,
+	(struct usb_descriptor_header *) &acm_hs_notify_desc,
+	(struct usb_descriptor_header *) &acm_data_interface_desc,
+	(struct usb_descriptor_header *) &acm_hs_in_desc,
+	(struct usb_descriptor_header *) &acm_hs_out_desc,
+	NULL,
+};
+
+static struct usb_endpoint_descriptor acm_ss_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor acm_ss_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor acm_ss_bulk_comp_desc = {
+	.bLength =              sizeof acm_ss_bulk_comp_desc,
+	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_descriptor_header *acm_ss_function[] = {
+	(struct usb_descriptor_header *) &acm_iad_descriptor,
+	(struct usb_descriptor_header *) &acm_control_interface_desc,
+	(struct usb_descriptor_header *) &acm_header_desc,
+	(struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
+	(struct usb_descriptor_header *) &acm_descriptor,
+	(struct usb_descriptor_header *) &acm_union_desc,
+	(struct usb_descriptor_header *) &acm_hs_notify_desc,
+	(struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
+	(struct usb_descriptor_header *) &acm_data_interface_desc,
+	(struct usb_descriptor_header *) &acm_ss_in_desc,
+	(struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
+	(struct usb_descriptor_header *) &acm_ss_out_desc,
+	(struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
+	NULL,
+};
+
+/* string descriptors: */
+
+#define ACM_CTRL_IDX	0
+#define ACM_DATA_IDX	1
+#define ACM_IAD_IDX	2
+
+/* static strings, in UTF-8 */
+static struct usb_string acm_string_defs[] = {
+	[ACM_CTRL_IDX].s = "CDC Abstract Control Model (ACM)",
+	[ACM_DATA_IDX].s = "CDC ACM Data",
+	[ACM_IAD_IDX ].s = "CDC Serial",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings acm_string_table = {
+	.language =		0x0409,	/* en-us */
+	.strings =		acm_string_defs,
+};
+
+static struct usb_gadget_strings *acm_strings[] = {
+	&acm_string_table,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* ACM control ... data handling is delegated to tty library code.
+ * The main task of this function is to activate and deactivate
+ * that code based on device state; track parameters like line
+ * speed, handshake state, and so on; and issue notifications.
+ */
+
+static void acm_complete_set_line_coding(struct usb_ep *ep,
+		struct usb_request *req)
+{
+	struct f_acm	*acm = ep->driver_data;
+	struct usb_composite_dev *cdev = acm->port.func.config->cdev;
+
+	if (req->status != 0) {
+		dev_dbg(&cdev->gadget->dev, "acm ttyGS%d completion, err %d\n",
+			acm->port_num, req->status);
+		return;
+	}
+
+	/* normal completion */
+	if (req->actual != sizeof(acm->port_line_coding)) {
+		dev_dbg(&cdev->gadget->dev, "acm ttyGS%d short resp, len %d\n",
+			acm->port_num, req->actual);
+		usb_ep_set_halt(ep);
+	} else {
+		struct usb_cdc_line_coding	*value = req->buf;
+
+		/* REVISIT:  we currently just remember this data.
+		 * If we change that, (a) validate it first, then
+		 * (b) update whatever hardware needs updating,
+		 * (c) worry about locking.  This is information on
+		 * the order of 9600-8-N-1 ... most of which means
+		 * nothing unless we control a real RS232 line.
+		 */
+		acm->port_line_coding = *value;
+	}
+}
+
+static int acm_send_break(struct gserial *port, int duration);
+
+static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+	struct f_acm		*acm = func_to_acm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	int			value = -EOPNOTSUPP;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	/* composite driver infrastructure handles everything except
+	 * CDC class messages; interface activation uses set_alt().
+	 *
+	 * Note CDC spec table 4 lists the ACM request profile.  It requires
+	 * encapsulated command support ... we don't handle any, and respond
+	 * to them by stalling.  Options include get/set/clear comm features
+	 * (not that useful) and SEND_BREAK.
+	 */
+	switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
+
+	/* SET_LINE_CODING ... just read and save what the host sends */
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+			| USB_CDC_REQ_SET_LINE_CODING:
+		if (w_length != sizeof(struct usb_cdc_line_coding)
+				|| w_index != acm->ctrl_id)
+			goto invalid;
+
+		value = w_length;
+		cdev->gadget->ep0->driver_data = acm;
+		req->complete = acm_complete_set_line_coding;
+		break;
+
+	/* GET_LINE_CODING ... return what host sent, or initial value */
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+			| USB_CDC_REQ_GET_LINE_CODING:
+		if (w_index != acm->ctrl_id)
+			goto invalid;
+
+		value = min_t(unsigned, w_length,
+				sizeof(struct usb_cdc_line_coding));
+		memcpy(req->buf, &acm->port_line_coding, value);
+		break;
+
+	/* SET_CONTROL_LINE_STATE ... save what the host sent */
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+			| USB_CDC_REQ_SET_CONTROL_LINE_STATE:
+		if (w_index != acm->ctrl_id)
+			goto invalid;
+
+		value = 0;
+
+		/* FIXME we should not allow data to flow until the
+		 * host sets the USB_CDC_CTRL_DTR bit; and when it clears
+		 * that bit, we should return to that no-flow state.
+		 */
+		acm->port_handshake_bits = w_value;
+		break;
+
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+			| USB_CDC_REQ_SEND_BREAK:
+		if (w_index != acm->ctrl_id)
+			goto invalid;
+
+		acm_send_break(&acm->port, w_value);
+		break;
+
+	default:
+invalid:
+		dev_vdbg(&cdev->gadget->dev,
+			 "invalid control req%02x.%02x v%04x i%04x l%d\n",
+			 ctrl->bRequestType, ctrl->bRequest,
+			 w_value, w_index, w_length);
+	}
+
+	/* respond with data transfer or status phase? */
+	if (value >= 0) {
+		dev_dbg(&cdev->gadget->dev,
+			"acm ttyGS%d req%02x.%02x v%04x i%04x l%d\n",
+			acm->port_num, ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+		req->zero = 0;
+		req->length = value;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0)
+			ERROR(cdev, "acm response on ttyGS%d, err %d\n",
+					acm->port_num, value);
+	}
+
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_acm		*acm = func_to_acm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	/* we know alt == 0, so this is an activation or a reset */
+
+	if (intf == acm->ctrl_id) {
+		if (acm->notify->enabled) {
+			dev_vdbg(&cdev->gadget->dev,
+					"reset acm control interface %d\n", intf);
+			usb_ep_disable(acm->notify);
+		}
+
+		if (!acm->notify->desc)
+			if (config_ep_by_speed(cdev->gadget, f, acm->notify))
+				return -EINVAL;
+
+		usb_ep_enable(acm->notify);
+
+	} else if (intf == acm->data_id) {
+		if (acm->notify->enabled) {
+			dev_dbg(&cdev->gadget->dev,
+				"reset acm ttyGS%d\n", acm->port_num);
+			gserial_disconnect(&acm->port);
+		}
+		if (!acm->port.in->desc || !acm->port.out->desc) {
+			dev_dbg(&cdev->gadget->dev,
+				"activate acm ttyGS%d\n", acm->port_num);
+			if (config_ep_by_speed(cdev->gadget, f,
+					       acm->port.in) ||
+			    config_ep_by_speed(cdev->gadget, f,
+					       acm->port.out)) {
+				acm->port.in->desc = NULL;
+				acm->port.out->desc = NULL;
+				return -EINVAL;
+			}
+		}
+		gserial_connect(&acm->port, acm->port_num);
+
+	} else
+		return -EINVAL;
+
+	return 0;
+}
+
+static void acm_disable(struct usb_function *f)
+{
+	struct f_acm	*acm = func_to_acm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	dev_dbg(&cdev->gadget->dev, "acm ttyGS%d deactivated\n", acm->port_num);
+	gserial_disconnect(&acm->port);
+	usb_ep_disable(acm->notify);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * acm_cdc_notify - issue CDC notification to host
+ * @acm: wraps host to be notified
+ * @type: notification type
+ * @value: Refer to cdc specs, wValue field.
+ * @data: data to be sent
+ * @length: size of data
+ * Context: irqs blocked, acm->lock held, acm_notify_req non-null
+ *
+ * Returns zero on success or a negative errno.
+ *
+ * See section 6.3.5 of the CDC 1.1 specification for information
+ * about the only notification we issue:  SerialState change.
+ */
+static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value,
+		void *data, unsigned length)
+{
+	struct usb_ep			*ep = acm->notify;
+	struct usb_request		*req;
+	struct usb_cdc_notification	*notify;
+	const unsigned			len = sizeof(*notify) + length;
+	void				*buf;
+	int				status;
+
+	req = acm->notify_req;
+	acm->notify_req = NULL;
+	acm->pending = false;
+
+	req->length = len;
+	notify = req->buf;
+	buf = notify + 1;
+
+	notify->bmRequestType = USB_DIR_IN | USB_TYPE_CLASS
+			| USB_RECIP_INTERFACE;
+	notify->bNotificationType = type;
+	notify->wValue = cpu_to_le16(value);
+	notify->wIndex = cpu_to_le16(acm->ctrl_id);
+	notify->wLength = cpu_to_le16(length);
+	memcpy(buf, data, length);
+
+	/* ep_queue() can complete immediately if it fills the fifo... */
+	spin_unlock(&acm->lock);
+	status = usb_ep_queue(ep, req, GFP_ATOMIC);
+	spin_lock(&acm->lock);
+
+	if (status < 0) {
+		ERROR(acm->port.func.config->cdev,
+				"acm ttyGS%d can't notify serial state, %d\n",
+				acm->port_num, status);
+		acm->notify_req = req;
+	}
+
+	return status;
+}
+
+static int acm_notify_serial_state(struct f_acm *acm)
+{
+	struct usb_composite_dev *cdev = acm->port.func.config->cdev;
+	int			status;
+	__le16			serial_state;
+
+	spin_lock(&acm->lock);
+	if (acm->notify_req) {
+		dev_dbg(&cdev->gadget->dev, "acm ttyGS%d serial state %04x\n",
+			acm->port_num, acm->serial_state);
+		serial_state = cpu_to_le16(acm->serial_state);
+		status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE,
+				0, &serial_state, sizeof(acm->serial_state));
+	} else {
+		acm->pending = true;
+		status = 0;
+	}
+	spin_unlock(&acm->lock);
+	return status;
+}
+
+static void acm_cdc_notify_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_acm		*acm = req->context;
+	u8			doit = false;
+
+	/* on this call path we do NOT hold the port spinlock,
+	 * which is why ACM needs its own spinlock
+	 */
+	spin_lock(&acm->lock);
+	if (req->status != -ESHUTDOWN)
+		doit = acm->pending;
+	acm->notify_req = req;
+	spin_unlock(&acm->lock);
+
+	if (doit)
+		acm_notify_serial_state(acm);
+}
+
+/* connect == the TTY link is open */
+
+static void acm_connect(struct gserial *port)
+{
+	struct f_acm		*acm = port_to_acm(port);
+
+	acm->serial_state |= USB_CDC_SERIAL_STATE_DSR | USB_CDC_SERIAL_STATE_DCD;
+	acm_notify_serial_state(acm);
+}
+
+static void acm_disconnect(struct gserial *port)
+{
+	struct f_acm		*acm = port_to_acm(port);
+
+	acm->serial_state &= ~(USB_CDC_SERIAL_STATE_DSR | USB_CDC_SERIAL_STATE_DCD);
+	acm_notify_serial_state(acm);
+}
+
+static int acm_send_break(struct gserial *port, int duration)
+{
+	struct f_acm		*acm = port_to_acm(port);
+	u16			state;
+
+	state = acm->serial_state;
+	state &= ~USB_CDC_SERIAL_STATE_BREAK;
+	if (duration)
+		state |= USB_CDC_SERIAL_STATE_BREAK;
+
+	acm->serial_state = state;
+	return acm_notify_serial_state(acm);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* ACM function driver setup/binding */
+static int
+acm_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_acm		*acm = func_to_acm(f);
+	struct usb_string	*us;
+	int			status;
+	struct usb_ep		*ep;
+
+	/* REVISIT might want instance-specific strings to help
+	 * distinguish instances ...
+	 */
+
+	/* maybe allocate device-global string IDs, and patch descriptors */
+	us = usb_gstrings_attach(cdev, acm_strings,
+			ARRAY_SIZE(acm_string_defs));
+	if (IS_ERR(us))
+		return PTR_ERR(us);
+	acm_control_interface_desc.iInterface = us[ACM_CTRL_IDX].id;
+	acm_data_interface_desc.iInterface = us[ACM_DATA_IDX].id;
+	acm_iad_descriptor.iFunction = us[ACM_IAD_IDX].id;
+
+	/* allocate instance-specific interface IDs, and patch descriptors */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	acm->ctrl_id = status;
+	acm_iad_descriptor.bFirstInterface = status;
+
+	acm_control_interface_desc.bInterfaceNumber = status;
+	acm_union_desc .bMasterInterface0 = status;
+
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	acm->data_id = status;
+
+	acm_data_interface_desc.bInterfaceNumber = status;
+	acm_union_desc.bSlaveInterface0 = status;
+	acm_call_mgmt_descriptor.bDataInterface = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_in_desc);
+	if (!ep)
+		goto fail;
+	acm->port.in = ep;
+
+	ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_out_desc);
+	if (!ep)
+		goto fail;
+	acm->port.out = ep;
+
+	ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_notify_desc);
+	if (!ep)
+		goto fail;
+	acm->notify = ep;
+
+	/* allocate notification */
+	acm->notify_req = gs_alloc_req(ep,
+			sizeof(struct usb_cdc_notification) + 2,
+			GFP_KERNEL);
+	if (!acm->notify_req)
+		goto fail;
+
+	acm->notify_req->complete = acm_cdc_notify_complete;
+	acm->notify_req->context = acm;
+
+	/* support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+	acm_hs_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
+	acm_hs_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
+	acm_hs_notify_desc.bEndpointAddress =
+		acm_fs_notify_desc.bEndpointAddress;
+
+	acm_ss_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
+	acm_ss_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
+
+	status = usb_assign_descriptors(f, acm_fs_function, acm_hs_function,
+			acm_ss_function, acm_ss_function);
+	if (status)
+		goto fail;
+
+	dev_dbg(&cdev->gadget->dev,
+		"acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+		acm->port_num,
+		gadget_is_superspeed(c->cdev->gadget) ? "super" :
+		gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+		acm->port.in->name, acm->port.out->name,
+		acm->notify->name);
+	return 0;
+
+fail:
+	if (acm->notify_req)
+		gs_free_req(acm->notify, acm->notify_req);
+
+	ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status);
+
+	return status;
+}
+
+static void acm_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_acm		*acm = func_to_acm(f);
+
+	acm_string_defs[0].id = 0;
+	usb_free_all_descriptors(f);
+	if (acm->notify_req)
+		gs_free_req(acm->notify, acm->notify_req);
+}
+
+static void acm_free_func(struct usb_function *f)
+{
+	struct f_acm		*acm = func_to_acm(f);
+
+	kfree(acm);
+}
+
+static void acm_resume(struct usb_function *f)
+{
+	struct f_acm *acm = func_to_acm(f);
+
+	gserial_resume(&acm->port);
+}
+
+static void acm_suspend(struct usb_function *f)
+{
+	struct f_acm *acm = func_to_acm(f);
+
+	gserial_suspend(&acm->port);
+}
+
+static struct usb_function *acm_alloc_func(struct usb_function_instance *fi)
+{
+	struct f_serial_opts *opts;
+	struct f_acm *acm;
+
+	acm = kzalloc(sizeof(*acm), GFP_KERNEL);
+	if (!acm)
+		return ERR_PTR(-ENOMEM);
+
+	spin_lock_init(&acm->lock);
+
+	acm->port.connect = acm_connect;
+	acm->port.disconnect = acm_disconnect;
+	acm->port.send_break = acm_send_break;
+
+	acm->port.func.name = "acm";
+	acm->port.func.strings = acm_strings;
+	/* descriptors are per-instance copies */
+	acm->port.func.bind = acm_bind;
+	acm->port.func.set_alt = acm_set_alt;
+	acm->port.func.setup = acm_setup;
+	acm->port.func.disable = acm_disable;
+
+	opts = container_of(fi, struct f_serial_opts, func_inst);
+	acm->port_num = opts->port_num;
+	acm->port.func.unbind = acm_unbind;
+	acm->port.func.free_func = acm_free_func;
+	acm->port.func.resume = acm_resume;
+	acm->port.func.suspend = acm_suspend;
+
+	return &acm->port.func;
+}
+
+static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_serial_opts,
+			func_inst.group);
+}
+
+static void acm_attr_release(struct config_item *item)
+{
+	struct f_serial_opts *opts = to_f_serial_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations acm_item_ops = {
+	.release                = acm_attr_release,
+};
+
+#ifdef CONFIG_U_SERIAL_CONSOLE
+
+static ssize_t f_acm_console_store(struct config_item *item,
+		const char *page, size_t count)
+{
+	return gserial_set_console(to_f_serial_opts(item)->port_num,
+				   page, count);
+}
+
+static ssize_t f_acm_console_show(struct config_item *item, char *page)
+{
+	return gserial_get_console(to_f_serial_opts(item)->port_num, page);
+}
+
+CONFIGFS_ATTR(f_acm_, console);
+
+#endif /* CONFIG_U_SERIAL_CONSOLE */
+
+static ssize_t f_acm_port_num_show(struct config_item *item, char *page)
+{
+	return sprintf(page, "%u\n", to_f_serial_opts(item)->port_num);
+}
+
+CONFIGFS_ATTR_RO(f_acm_, port_num);
+
+static struct configfs_attribute *acm_attrs[] = {
+#ifdef CONFIG_U_SERIAL_CONSOLE
+	&f_acm_attr_console,
+#endif
+	&f_acm_attr_port_num,
+	NULL,
+};
+
+static const struct config_item_type acm_func_type = {
+	.ct_item_ops    = &acm_item_ops,
+	.ct_attrs	= acm_attrs,
+	.ct_owner       = THIS_MODULE,
+};
+
+static void acm_free_instance(struct usb_function_instance *fi)
+{
+	struct f_serial_opts *opts;
+
+	opts = container_of(fi, struct f_serial_opts, func_inst);
+	gserial_free_line(opts->port_num);
+	kfree(opts);
+}
+
+static struct usb_function_instance *acm_alloc_instance(void)
+{
+	struct f_serial_opts *opts;
+	int ret;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+	opts->func_inst.free_func_inst = acm_free_instance;
+	ret = gserial_alloc_line(&opts->port_num);
+	if (ret) {
+		kfree(opts);
+		return ERR_PTR(ret);
+	}
+	config_group_init_type_name(&opts->func_inst.group, "",
+			&acm_func_type);
+	return &opts->func_inst;
+}
+DECLARE_USB_FUNCTION_INIT(acm, acm_alloc_instance, acm_alloc_func);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/function/f_ecm.c b/drivers/usb/gadget/function/f_ecm.c
new file mode 100644
index 000000000..ffe2486fc
--- /dev/null
+++ b/drivers/usb/gadget/function/f_ecm.c
@@ -0,0 +1,965 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_ecm.c -- USB CDC Ethernet (ECM) link function driver
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+
+#include "u_ether.h"
+#include "u_ether_configfs.h"
+#include "u_ecm.h"
+
+
+/*
+ * This function is a "CDC Ethernet Networking Control Model" (CDC ECM)
+ * Ethernet link.  The data transfer model is simple (packets sent and
+ * received over bulk endpoints using normal short packet termination),
+ * and the control model exposes various data and optional notifications.
+ *
+ * ECM is well standardized and (except for Microsoft) supported by most
+ * operating systems with USB host support.  It's the preferred interop
+ * solution for Ethernet over USB, at least for firmware based solutions.
+ * (Hardware solutions tend to be more minimalist.)  A newer and simpler
+ * "Ethernet Emulation Model" (CDC EEM) hasn't yet caught on.
+ *
+ * Note that ECM requires the use of "alternate settings" for its data
+ * interface.  This means that the set_alt() method has real work to do,
+ * and also means that a get_alt() method is required.
+ */
+
+
+enum ecm_notify_state {
+	ECM_NOTIFY_NONE,		/* don't notify */
+	ECM_NOTIFY_CONNECT,		/* issue CONNECT next */
+	ECM_NOTIFY_SPEED,		/* issue SPEED_CHANGE next */
+};
+
+struct f_ecm {
+	struct gether			port;
+	u8				ctrl_id, data_id;
+
+	char				ethaddr[14];
+
+	struct usb_ep			*notify;
+	struct usb_request		*notify_req;
+	u8				notify_state;
+	atomic_t			notify_count;
+	bool				is_open;
+
+	/* FIXME is_open needs some irq-ish locking
+	 * ... possibly the same as port.ioport
+	 */
+};
+
+static inline struct f_ecm *func_to_ecm(struct usb_function *f)
+{
+	return container_of(f, struct f_ecm, port.func);
+}
+
+/* peak (theoretical) bulk transfer rate in bits-per-second */
+static inline unsigned ecm_bitrate(struct usb_gadget *g)
+{
+	if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
+		return 13 * 1024 * 8 * 1000 * 8;
+	else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+		return 13 * 512 * 8 * 1000 * 8;
+	else
+		return 19 * 64 * 1 * 1000 * 8;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Include the status endpoint if we can, even though it's optional.
+ *
+ * Use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one
+ * packet, to simplify cancellation; and a big transfer interval, to
+ * waste less bandwidth.
+ *
+ * Some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even
+ * if they ignore the connect/disconnect notifications that real aether
+ * can provide.  More advanced cdc configurations might want to support
+ * encapsulated commands (vendor-specific, using control-OUT).
+ */
+
+#define ECM_STATUS_INTERVAL_MS		32
+#define ECM_STATUS_BYTECOUNT		16	/* 8 byte header + data */
+
+
+/* interface descriptor: */
+
+static struct usb_interface_assoc_descriptor
+ecm_iad_descriptor = {
+	.bLength =		sizeof ecm_iad_descriptor,
+	.bDescriptorType =	USB_DT_INTERFACE_ASSOCIATION,
+
+	/* .bFirstInterface =	DYNAMIC, */
+	.bInterfaceCount =	2,	/* control + data */
+	.bFunctionClass =	USB_CLASS_COMM,
+	.bFunctionSubClass =	USB_CDC_SUBCLASS_ETHERNET,
+	.bFunctionProtocol =	USB_CDC_PROTO_NONE,
+	/* .iFunction =		DYNAMIC */
+};
+
+
+static struct usb_interface_descriptor ecm_control_intf = {
+	.bLength =		sizeof ecm_control_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	/* .bInterfaceNumber = DYNAMIC */
+	/* status endpoint is optional; this could be patched later */
+	.bNumEndpoints =	1,
+	.bInterfaceClass =	USB_CLASS_COMM,
+	.bInterfaceSubClass =	USB_CDC_SUBCLASS_ETHERNET,
+	.bInterfaceProtocol =	USB_CDC_PROTO_NONE,
+	/* .iInterface = DYNAMIC */
+};
+
+static struct usb_cdc_header_desc ecm_header_desc = {
+	.bLength =		sizeof ecm_header_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
+
+	.bcdCDC =		cpu_to_le16(0x0110),
+};
+
+static struct usb_cdc_union_desc ecm_union_desc = {
+	.bLength =		sizeof(ecm_union_desc),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_UNION_TYPE,
+	/* .bMasterInterface0 =	DYNAMIC */
+	/* .bSlaveInterface0 =	DYNAMIC */
+};
+
+static struct usb_cdc_ether_desc ecm_desc = {
+	.bLength =		sizeof ecm_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_ETHERNET_TYPE,
+
+	/* this descriptor actually adds value, surprise! */
+	/* .iMACAddress = DYNAMIC */
+	.bmEthernetStatistics =	cpu_to_le32(0), /* no statistics */
+	.wMaxSegmentSize =	cpu_to_le16(ETH_FRAME_LEN),
+	.wNumberMCFilters =	cpu_to_le16(0),
+	.bNumberPowerFilters =	0,
+};
+
+/* the default data interface has no endpoints ... */
+
+static struct usb_interface_descriptor ecm_data_nop_intf = {
+	.bLength =		sizeof ecm_data_nop_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bInterfaceNumber =	1,
+	.bAlternateSetting =	0,
+	.bNumEndpoints =	0,
+	.bInterfaceClass =	USB_CLASS_CDC_DATA,
+	.bInterfaceSubClass =	0,
+	.bInterfaceProtocol =	0,
+	/* .iInterface = DYNAMIC */
+};
+
+/* ... but the "real" data interface has two bulk endpoints */
+
+static struct usb_interface_descriptor ecm_data_intf = {
+	.bLength =		sizeof ecm_data_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bInterfaceNumber =	1,
+	.bAlternateSetting =	1,
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_CDC_DATA,
+	.bInterfaceSubClass =	0,
+	.bInterfaceProtocol =	0,
+	/* .iInterface = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor fs_ecm_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(ECM_STATUS_BYTECOUNT),
+	.bInterval =		ECM_STATUS_INTERVAL_MS,
+};
+
+static struct usb_endpoint_descriptor fs_ecm_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor fs_ecm_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *ecm_fs_function[] = {
+	/* CDC ECM control descriptors */
+	(struct usb_descriptor_header *) &ecm_iad_descriptor,
+	(struct usb_descriptor_header *) &ecm_control_intf,
+	(struct usb_descriptor_header *) &ecm_header_desc,
+	(struct usb_descriptor_header *) &ecm_union_desc,
+	(struct usb_descriptor_header *) &ecm_desc,
+
+	/* NOTE: status endpoint might need to be removed */
+	(struct usb_descriptor_header *) &fs_ecm_notify_desc,
+
+	/* data interface, altsettings 0 and 1 */
+	(struct usb_descriptor_header *) &ecm_data_nop_intf,
+	(struct usb_descriptor_header *) &ecm_data_intf,
+	(struct usb_descriptor_header *) &fs_ecm_in_desc,
+	(struct usb_descriptor_header *) &fs_ecm_out_desc,
+	NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor hs_ecm_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(ECM_STATUS_BYTECOUNT),
+	.bInterval =		USB_MS_TO_HS_INTERVAL(ECM_STATUS_INTERVAL_MS),
+};
+
+static struct usb_endpoint_descriptor hs_ecm_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor hs_ecm_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *ecm_hs_function[] = {
+	/* CDC ECM control descriptors */
+	(struct usb_descriptor_header *) &ecm_iad_descriptor,
+	(struct usb_descriptor_header *) &ecm_control_intf,
+	(struct usb_descriptor_header *) &ecm_header_desc,
+	(struct usb_descriptor_header *) &ecm_union_desc,
+	(struct usb_descriptor_header *) &ecm_desc,
+
+	/* NOTE: status endpoint might need to be removed */
+	(struct usb_descriptor_header *) &hs_ecm_notify_desc,
+
+	/* data interface, altsettings 0 and 1 */
+	(struct usb_descriptor_header *) &ecm_data_nop_intf,
+	(struct usb_descriptor_header *) &ecm_data_intf,
+	(struct usb_descriptor_header *) &hs_ecm_in_desc,
+	(struct usb_descriptor_header *) &hs_ecm_out_desc,
+	NULL,
+};
+
+/* super speed support: */
+
+static struct usb_endpoint_descriptor ss_ecm_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(ECM_STATUS_BYTECOUNT),
+	.bInterval =		USB_MS_TO_HS_INTERVAL(ECM_STATUS_INTERVAL_MS),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ecm_intr_comp_desc = {
+	.bLength =		sizeof ss_ecm_intr_comp_desc,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 3 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+	.wBytesPerInterval =	cpu_to_le16(ECM_STATUS_BYTECOUNT),
+};
+
+static struct usb_endpoint_descriptor ss_ecm_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor ss_ecm_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ecm_bulk_comp_desc = {
+	.bLength =		sizeof ss_ecm_bulk_comp_desc,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 2 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+};
+
+static struct usb_descriptor_header *ecm_ss_function[] = {
+	/* CDC ECM control descriptors */
+	(struct usb_descriptor_header *) &ecm_iad_descriptor,
+	(struct usb_descriptor_header *) &ecm_control_intf,
+	(struct usb_descriptor_header *) &ecm_header_desc,
+	(struct usb_descriptor_header *) &ecm_union_desc,
+	(struct usb_descriptor_header *) &ecm_desc,
+
+	/* NOTE: status endpoint might need to be removed */
+	(struct usb_descriptor_header *) &ss_ecm_notify_desc,
+	(struct usb_descriptor_header *) &ss_ecm_intr_comp_desc,
+
+	/* data interface, altsettings 0 and 1 */
+	(struct usb_descriptor_header *) &ecm_data_nop_intf,
+	(struct usb_descriptor_header *) &ecm_data_intf,
+	(struct usb_descriptor_header *) &ss_ecm_in_desc,
+	(struct usb_descriptor_header *) &ss_ecm_bulk_comp_desc,
+	(struct usb_descriptor_header *) &ss_ecm_out_desc,
+	(struct usb_descriptor_header *) &ss_ecm_bulk_comp_desc,
+	NULL,
+};
+
+/* string descriptors: */
+
+static struct usb_string ecm_string_defs[] = {
+	[0].s = "CDC Ethernet Control Model (ECM)",
+	[1].s = "",
+	[2].s = "CDC Ethernet Data",
+	[3].s = "CDC ECM",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings ecm_string_table = {
+	.language =		0x0409,	/* en-us */
+	.strings =		ecm_string_defs,
+};
+
+static struct usb_gadget_strings *ecm_strings[] = {
+	&ecm_string_table,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static void ecm_do_notify(struct f_ecm *ecm)
+{
+	struct usb_request		*req = ecm->notify_req;
+	struct usb_cdc_notification	*event;
+	struct usb_composite_dev	*cdev = ecm->port.func.config->cdev;
+	__le32				*data;
+	int				status;
+
+	/* notification already in flight? */
+	if (atomic_read(&ecm->notify_count))
+		return;
+
+	event = req->buf;
+	switch (ecm->notify_state) {
+	case ECM_NOTIFY_NONE:
+		return;
+
+	case ECM_NOTIFY_CONNECT:
+		event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION;
+		if (ecm->is_open)
+			event->wValue = cpu_to_le16(1);
+		else
+			event->wValue = cpu_to_le16(0);
+		event->wLength = 0;
+		req->length = sizeof *event;
+
+		DBG(cdev, "notify connect %s\n",
+				ecm->is_open ? "true" : "false");
+		ecm->notify_state = ECM_NOTIFY_SPEED;
+		break;
+
+	case ECM_NOTIFY_SPEED:
+		event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE;
+		event->wValue = cpu_to_le16(0);
+		event->wLength = cpu_to_le16(8);
+		req->length = ECM_STATUS_BYTECOUNT;
+
+		/* SPEED_CHANGE data is up/down speeds in bits/sec */
+		data = req->buf + sizeof *event;
+		data[0] = cpu_to_le32(ecm_bitrate(cdev->gadget));
+		data[1] = data[0];
+
+		DBG(cdev, "notify speed %d\n", ecm_bitrate(cdev->gadget));
+		ecm->notify_state = ECM_NOTIFY_NONE;
+		break;
+	}
+	event->bmRequestType = 0xA1;
+	event->wIndex = cpu_to_le16(ecm->ctrl_id);
+
+	atomic_inc(&ecm->notify_count);
+	status = usb_ep_queue(ecm->notify, req, GFP_ATOMIC);
+	if (status < 0) {
+		atomic_dec(&ecm->notify_count);
+		DBG(cdev, "notify --> %d\n", status);
+	}
+}
+
+static void ecm_notify(struct f_ecm *ecm)
+{
+	/* NOTE on most versions of Linux, host side cdc-ethernet
+	 * won't listen for notifications until its netdevice opens.
+	 * The first notification then sits in the FIFO for a long
+	 * time, and the second one is queued.
+	 */
+	ecm->notify_state = ECM_NOTIFY_CONNECT;
+	ecm_do_notify(ecm);
+}
+
+static void ecm_notify_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_ecm			*ecm = req->context;
+	struct usb_composite_dev	*cdev = ecm->port.func.config->cdev;
+	struct usb_cdc_notification	*event = req->buf;
+
+	switch (req->status) {
+	case 0:
+		/* no fault */
+		atomic_dec(&ecm->notify_count);
+		break;
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		atomic_set(&ecm->notify_count, 0);
+		ecm->notify_state = ECM_NOTIFY_NONE;
+		break;
+	default:
+		DBG(cdev, "event %02x --> %d\n",
+			event->bNotificationType, req->status);
+		atomic_dec(&ecm->notify_count);
+		break;
+	}
+	ecm_do_notify(ecm);
+}
+
+static int ecm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+	struct f_ecm		*ecm = func_to_ecm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	int			value = -EOPNOTSUPP;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	/* composite driver infrastructure handles everything except
+	 * CDC class messages; interface activation uses set_alt().
+	 */
+	switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+			| USB_CDC_SET_ETHERNET_PACKET_FILTER:
+		/* see 6.2.30: no data, wIndex = interface,
+		 * wValue = packet filter bitmap
+		 */
+		if (w_length != 0 || w_index != ecm->ctrl_id)
+			goto invalid;
+		DBG(cdev, "packet filter %02x\n", w_value);
+		/* REVISIT locking of cdc_filter.  This assumes the UDC
+		 * driver won't have a concurrent packet TX irq running on
+		 * another CPU; or that if it does, this write is atomic...
+		 */
+		ecm->port.cdc_filter = w_value;
+		value = 0;
+		break;
+
+	/* and optionally:
+	 * case USB_CDC_SEND_ENCAPSULATED_COMMAND:
+	 * case USB_CDC_GET_ENCAPSULATED_RESPONSE:
+	 * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS:
+	 * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER:
+	 * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER:
+	 * case USB_CDC_GET_ETHERNET_STATISTIC:
+	 */
+
+	default:
+invalid:
+		DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+	}
+
+	/* respond with data transfer or status phase? */
+	if (value >= 0) {
+		DBG(cdev, "ecm req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+		req->zero = 0;
+		req->length = value;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0)
+			ERROR(cdev, "ecm req %02x.%02x response err %d\n",
+					ctrl->bRequestType, ctrl->bRequest,
+					value);
+	}
+
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+
+static int ecm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_ecm		*ecm = func_to_ecm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	/* Control interface has only altsetting 0 */
+	if (intf == ecm->ctrl_id) {
+		if (alt != 0)
+			goto fail;
+
+		VDBG(cdev, "reset ecm control %d\n", intf);
+		usb_ep_disable(ecm->notify);
+		if (!(ecm->notify->desc)) {
+			VDBG(cdev, "init ecm ctrl %d\n", intf);
+			if (config_ep_by_speed(cdev->gadget, f, ecm->notify))
+				goto fail;
+		}
+		usb_ep_enable(ecm->notify);
+
+	/* Data interface has two altsettings, 0 and 1 */
+	} else if (intf == ecm->data_id) {
+		if (alt > 1)
+			goto fail;
+
+		if (ecm->port.in_ep->enabled) {
+			DBG(cdev, "reset ecm\n");
+			gether_disconnect(&ecm->port);
+		}
+
+		if (!ecm->port.in_ep->desc ||
+		    !ecm->port.out_ep->desc) {
+			DBG(cdev, "init ecm\n");
+			if (config_ep_by_speed(cdev->gadget, f,
+					       ecm->port.in_ep) ||
+			    config_ep_by_speed(cdev->gadget, f,
+					       ecm->port.out_ep)) {
+				ecm->port.in_ep->desc = NULL;
+				ecm->port.out_ep->desc = NULL;
+				goto fail;
+			}
+		}
+
+		/* CDC Ethernet only sends data in non-default altsettings.
+		 * Changing altsettings resets filters, statistics, etc.
+		 */
+		if (alt == 1) {
+			struct net_device	*net;
+
+			/* Enable zlps by default for ECM conformance;
+			 * override for musb_hdrc (avoids txdma ovhead).
+			 */
+			ecm->port.is_zlp_ok =
+				gadget_is_zlp_supported(cdev->gadget);
+			ecm->port.cdc_filter = DEFAULT_FILTER;
+			DBG(cdev, "activate ecm\n");
+			net = gether_connect(&ecm->port);
+			if (IS_ERR(net))
+				return PTR_ERR(net);
+		}
+
+		/* NOTE this can be a minor disagreement with the ECM spec,
+		 * which says speed notifications will "always" follow
+		 * connection notifications.  But we allow one connect to
+		 * follow another (if the first is in flight), and instead
+		 * just guarantee that a speed notification is always sent.
+		 */
+		ecm_notify(ecm);
+	} else
+		goto fail;
+
+	return 0;
+fail:
+	return -EINVAL;
+}
+
+/* Because the data interface supports multiple altsettings,
+ * this ECM function *MUST* implement a get_alt() method.
+ */
+static int ecm_get_alt(struct usb_function *f, unsigned intf)
+{
+	struct f_ecm		*ecm = func_to_ecm(f);
+
+	if (intf == ecm->ctrl_id)
+		return 0;
+	return ecm->port.in_ep->enabled ? 1 : 0;
+}
+
+static void ecm_disable(struct usb_function *f)
+{
+	struct f_ecm		*ecm = func_to_ecm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	DBG(cdev, "ecm deactivated\n");
+
+	if (ecm->port.in_ep->enabled) {
+		gether_disconnect(&ecm->port);
+	} else {
+		ecm->port.in_ep->desc = NULL;
+		ecm->port.out_ep->desc = NULL;
+	}
+
+	usb_ep_disable(ecm->notify);
+	ecm->notify->desc = NULL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Callbacks let us notify the host about connect/disconnect when the
+ * net device is opened or closed.
+ *
+ * For testing, note that link states on this side include both opened
+ * and closed variants of:
+ *
+ *   - disconnected/unconfigured
+ *   - configured but inactive (data alt 0)
+ *   - configured and active (data alt 1)
+ *
+ * Each needs to be tested with unplug, rmmod, SET_CONFIGURATION, and
+ * SET_INTERFACE (altsetting).  Remember also that "configured" doesn't
+ * imply the host is actually polling the notification endpoint, and
+ * likewise that "active" doesn't imply it's actually using the data
+ * endpoints for traffic.
+ */
+
+static void ecm_open(struct gether *geth)
+{
+	struct f_ecm		*ecm = func_to_ecm(&geth->func);
+
+	DBG(ecm->port.func.config->cdev, "%s\n", __func__);
+
+	ecm->is_open = true;
+	ecm_notify(ecm);
+}
+
+static void ecm_close(struct gether *geth)
+{
+	struct f_ecm		*ecm = func_to_ecm(&geth->func);
+
+	DBG(ecm->port.func.config->cdev, "%s\n", __func__);
+
+	ecm->is_open = false;
+	ecm_notify(ecm);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* ethernet function driver setup/binding */
+
+static int
+ecm_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_ecm		*ecm = func_to_ecm(f);
+	struct usb_string	*us;
+	int			status;
+	struct usb_ep		*ep;
+
+	struct f_ecm_opts	*ecm_opts;
+
+	if (!can_support_ecm(cdev->gadget))
+		return -EINVAL;
+
+	ecm_opts = container_of(f->fi, struct f_ecm_opts, func_inst);
+
+	/*
+	 * in drivers/usb/gadget/configfs.c:configfs_composite_bind()
+	 * configurations are bound in sequence with list_for_each_entry,
+	 * in each configuration its functions are bound in sequence
+	 * with list_for_each_entry, so we assume no race condition
+	 * with regard to ecm_opts->bound access
+	 */
+	if (!ecm_opts->bound) {
+		mutex_lock(&ecm_opts->lock);
+		gether_set_gadget(ecm_opts->net, cdev->gadget);
+		status = gether_register_netdev(ecm_opts->net);
+		mutex_unlock(&ecm_opts->lock);
+		if (status)
+			return status;
+		ecm_opts->bound = true;
+	}
+
+	ecm_string_defs[1].s = ecm->ethaddr;
+
+	us = usb_gstrings_attach(cdev, ecm_strings,
+				 ARRAY_SIZE(ecm_string_defs));
+	if (IS_ERR(us))
+		return PTR_ERR(us);
+	ecm_control_intf.iInterface = us[0].id;
+	ecm_data_intf.iInterface = us[2].id;
+	ecm_desc.iMACAddress = us[1].id;
+	ecm_iad_descriptor.iFunction = us[3].id;
+
+	/* allocate instance-specific interface IDs */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	ecm->ctrl_id = status;
+	ecm_iad_descriptor.bFirstInterface = status;
+
+	ecm_control_intf.bInterfaceNumber = status;
+	ecm_union_desc.bMasterInterface0 = status;
+
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	ecm->data_id = status;
+
+	ecm_data_nop_intf.bInterfaceNumber = status;
+	ecm_data_intf.bInterfaceNumber = status;
+	ecm_union_desc.bSlaveInterface0 = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_ecm_in_desc);
+	if (!ep)
+		goto fail;
+	ecm->port.in_ep = ep;
+
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_ecm_out_desc);
+	if (!ep)
+		goto fail;
+	ecm->port.out_ep = ep;
+
+	/* NOTE:  a status/notification endpoint is *OPTIONAL* but we
+	 * don't treat it that way.  It's simpler, and some newer CDC
+	 * profiles (wireless handsets) no longer treat it as optional.
+	 */
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_ecm_notify_desc);
+	if (!ep)
+		goto fail;
+	ecm->notify = ep;
+
+	status = -ENOMEM;
+
+	/* allocate notification request and buffer */
+	ecm->notify_req = usb_ep_alloc_request(ep, GFP_KERNEL);
+	if (!ecm->notify_req)
+		goto fail;
+	ecm->notify_req->buf = kmalloc(ECM_STATUS_BYTECOUNT, GFP_KERNEL);
+	if (!ecm->notify_req->buf)
+		goto fail;
+	ecm->notify_req->context = ecm;
+	ecm->notify_req->complete = ecm_notify_complete;
+
+	/* support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+	hs_ecm_in_desc.bEndpointAddress = fs_ecm_in_desc.bEndpointAddress;
+	hs_ecm_out_desc.bEndpointAddress = fs_ecm_out_desc.bEndpointAddress;
+	hs_ecm_notify_desc.bEndpointAddress =
+		fs_ecm_notify_desc.bEndpointAddress;
+
+	ss_ecm_in_desc.bEndpointAddress = fs_ecm_in_desc.bEndpointAddress;
+	ss_ecm_out_desc.bEndpointAddress = fs_ecm_out_desc.bEndpointAddress;
+	ss_ecm_notify_desc.bEndpointAddress =
+		fs_ecm_notify_desc.bEndpointAddress;
+
+	status = usb_assign_descriptors(f, ecm_fs_function, ecm_hs_function,
+			ecm_ss_function, ecm_ss_function);
+	if (status)
+		goto fail;
+
+	/* NOTE:  all that is done without knowing or caring about
+	 * the network link ... which is unavailable to this code
+	 * until we're activated via set_alt().
+	 */
+
+	ecm->port.open = ecm_open;
+	ecm->port.close = ecm_close;
+
+	DBG(cdev, "CDC Ethernet: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+			gadget_is_superspeed(c->cdev->gadget) ? "super" :
+			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+			ecm->port.in_ep->name, ecm->port.out_ep->name,
+			ecm->notify->name);
+	return 0;
+
+fail:
+	if (ecm->notify_req) {
+		kfree(ecm->notify_req->buf);
+		usb_ep_free_request(ecm->notify, ecm->notify_req);
+	}
+
+	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+	return status;
+}
+
+static inline struct f_ecm_opts *to_f_ecm_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_ecm_opts,
+			    func_inst.group);
+}
+
+/* f_ecm_item_ops */
+USB_ETHERNET_CONFIGFS_ITEM(ecm);
+
+/* f_ecm_opts_dev_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(ecm);
+
+/* f_ecm_opts_host_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(ecm);
+
+/* f_ecm_opts_qmult */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(ecm);
+
+/* f_ecm_opts_ifname */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(ecm);
+
+static struct configfs_attribute *ecm_attrs[] = {
+	&ecm_opts_attr_dev_addr,
+	&ecm_opts_attr_host_addr,
+	&ecm_opts_attr_qmult,
+	&ecm_opts_attr_ifname,
+	NULL,
+};
+
+static const struct config_item_type ecm_func_type = {
+	.ct_item_ops	= &ecm_item_ops,
+	.ct_attrs	= ecm_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void ecm_free_inst(struct usb_function_instance *f)
+{
+	struct f_ecm_opts *opts;
+
+	opts = container_of(f, struct f_ecm_opts, func_inst);
+	if (opts->bound)
+		gether_cleanup(netdev_priv(opts->net));
+	else
+		free_netdev(opts->net);
+	kfree(opts);
+}
+
+static struct usb_function_instance *ecm_alloc_inst(void)
+{
+	struct f_ecm_opts *opts;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+	mutex_init(&opts->lock);
+	opts->func_inst.free_func_inst = ecm_free_inst;
+	opts->net = gether_setup_default();
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
+
+	config_group_init_type_name(&opts->func_inst.group, "", &ecm_func_type);
+
+	return &opts->func_inst;
+}
+
+static void ecm_free(struct usb_function *f)
+{
+	struct f_ecm *ecm;
+	struct f_ecm_opts *opts;
+
+	ecm = func_to_ecm(f);
+	opts = container_of(f->fi, struct f_ecm_opts, func_inst);
+	kfree(ecm);
+	mutex_lock(&opts->lock);
+	opts->refcnt--;
+	mutex_unlock(&opts->lock);
+}
+
+static void ecm_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_ecm		*ecm = func_to_ecm(f);
+
+	DBG(c->cdev, "ecm unbind\n");
+
+	usb_free_all_descriptors(f);
+
+	if (atomic_read(&ecm->notify_count)) {
+		usb_ep_dequeue(ecm->notify, ecm->notify_req);
+		atomic_set(&ecm->notify_count, 0);
+	}
+
+	kfree(ecm->notify_req->buf);
+	usb_ep_free_request(ecm->notify, ecm->notify_req);
+}
+
+static struct usb_function *ecm_alloc(struct usb_function_instance *fi)
+{
+	struct f_ecm	*ecm;
+	struct f_ecm_opts *opts;
+	int status;
+
+	/* allocate and initialize one new instance */
+	ecm = kzalloc(sizeof(*ecm), GFP_KERNEL);
+	if (!ecm)
+		return ERR_PTR(-ENOMEM);
+
+	opts = container_of(fi, struct f_ecm_opts, func_inst);
+	mutex_lock(&opts->lock);
+	opts->refcnt++;
+
+	/* export host's Ethernet address in CDC format */
+	status = gether_get_host_addr_cdc(opts->net, ecm->ethaddr,
+					  sizeof(ecm->ethaddr));
+	if (status < 12) {
+		kfree(ecm);
+		mutex_unlock(&opts->lock);
+		return ERR_PTR(-EINVAL);
+	}
+
+	ecm->port.ioport = netdev_priv(opts->net);
+	mutex_unlock(&opts->lock);
+	ecm->port.cdc_filter = DEFAULT_FILTER;
+
+	ecm->port.func.name = "cdc_ethernet";
+	/* descriptors are per-instance copies */
+	ecm->port.func.bind = ecm_bind;
+	ecm->port.func.unbind = ecm_unbind;
+	ecm->port.func.set_alt = ecm_set_alt;
+	ecm->port.func.get_alt = ecm_get_alt;
+	ecm->port.func.setup = ecm_setup;
+	ecm->port.func.disable = ecm_disable;
+	ecm->port.func.free_func = ecm_free;
+
+	return &ecm->port.func;
+}
+
+DECLARE_USB_FUNCTION_INIT(ecm, ecm_alloc_inst, ecm_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");
diff --git a/drivers/usb/gadget/function/f_eem.c b/drivers/usb/gadget/function/f_eem.c
new file mode 100644
index 000000000..5d38f29bd
--- /dev/null
+++ b/drivers/usb/gadget/function/f_eem.c
@@ -0,0 +1,680 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_eem.c -- USB CDC Ethernet (EEM) link function driver
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2009 EF Johnson Technologies
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/crc32.h>
+#include <linux/slab.h>
+
+#include "u_ether.h"
+#include "u_ether_configfs.h"
+#include "u_eem.h"
+
+#define EEM_HLEN 2
+
+/*
+ * This function is a "CDC Ethernet Emulation Model" (CDC EEM)
+ * Ethernet link.
+ */
+
+struct f_eem {
+	struct gether			port;
+	u8				ctrl_id;
+};
+
+struct in_context {
+	struct sk_buff	*skb;
+	struct usb_ep	*ep;
+};
+
+static inline struct f_eem *func_to_eem(struct usb_function *f)
+{
+	return container_of(f, struct f_eem, port.func);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* interface descriptor: */
+
+static struct usb_interface_descriptor eem_intf = {
+	.bLength =		sizeof eem_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	/* .bInterfaceNumber = DYNAMIC */
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_COMM,
+	.bInterfaceSubClass =	USB_CDC_SUBCLASS_EEM,
+	.bInterfaceProtocol =	USB_CDC_PROTO_EEM,
+	/* .iInterface = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor eem_fs_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor eem_fs_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *eem_fs_function[] = {
+	/* CDC EEM control descriptors */
+	(struct usb_descriptor_header *) &eem_intf,
+	(struct usb_descriptor_header *) &eem_fs_in_desc,
+	(struct usb_descriptor_header *) &eem_fs_out_desc,
+	NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor eem_hs_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor eem_hs_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *eem_hs_function[] = {
+	/* CDC EEM control descriptors */
+	(struct usb_descriptor_header *) &eem_intf,
+	(struct usb_descriptor_header *) &eem_hs_in_desc,
+	(struct usb_descriptor_header *) &eem_hs_out_desc,
+	NULL,
+};
+
+/* super speed support: */
+
+static struct usb_endpoint_descriptor eem_ss_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor eem_ss_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor eem_ss_bulk_comp_desc = {
+	.bLength =		sizeof eem_ss_bulk_comp_desc,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 2 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+};
+
+static struct usb_descriptor_header *eem_ss_function[] = {
+	/* CDC EEM control descriptors */
+	(struct usb_descriptor_header *) &eem_intf,
+	(struct usb_descriptor_header *) &eem_ss_in_desc,
+	(struct usb_descriptor_header *) &eem_ss_bulk_comp_desc,
+	(struct usb_descriptor_header *) &eem_ss_out_desc,
+	(struct usb_descriptor_header *) &eem_ss_bulk_comp_desc,
+	NULL,
+};
+
+/* string descriptors: */
+
+static struct usb_string eem_string_defs[] = {
+	[0].s = "CDC Ethernet Emulation Model (EEM)",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings eem_string_table = {
+	.language =		0x0409,	/* en-us */
+	.strings =		eem_string_defs,
+};
+
+static struct usb_gadget_strings *eem_strings[] = {
+	&eem_string_table,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int eem_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev *cdev = f->config->cdev;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+		ctrl->bRequestType, ctrl->bRequest,
+		w_value, w_index, w_length);
+
+	/* device either stalls (value < 0) or reports success */
+	return -EOPNOTSUPP;
+}
+
+
+static int eem_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_eem		*eem = func_to_eem(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct net_device	*net;
+
+	/* we know alt == 0, so this is an activation or a reset */
+	if (alt != 0)
+		goto fail;
+
+	if (intf == eem->ctrl_id) {
+		DBG(cdev, "reset eem\n");
+		gether_disconnect(&eem->port);
+
+		if (!eem->port.in_ep->desc || !eem->port.out_ep->desc) {
+			DBG(cdev, "init eem\n");
+			if (config_ep_by_speed(cdev->gadget, f,
+					       eem->port.in_ep) ||
+			    config_ep_by_speed(cdev->gadget, f,
+					       eem->port.out_ep)) {
+				eem->port.in_ep->desc = NULL;
+				eem->port.out_ep->desc = NULL;
+				goto fail;
+			}
+		}
+
+		/* zlps should not occur because zero-length EEM packets
+		 * will be inserted in those cases where they would occur
+		 */
+		eem->port.is_zlp_ok = 1;
+		eem->port.cdc_filter = DEFAULT_FILTER;
+		DBG(cdev, "activate eem\n");
+		net = gether_connect(&eem->port);
+		if (IS_ERR(net))
+			return PTR_ERR(net);
+	} else
+		goto fail;
+
+	return 0;
+fail:
+	return -EINVAL;
+}
+
+static void eem_disable(struct usb_function *f)
+{
+	struct f_eem		*eem = func_to_eem(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	DBG(cdev, "eem deactivated\n");
+
+	if (eem->port.in_ep->enabled)
+		gether_disconnect(&eem->port);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* EEM function driver setup/binding */
+
+static int eem_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_eem		*eem = func_to_eem(f);
+	struct usb_string	*us;
+	int			status;
+	struct usb_ep		*ep;
+
+	struct f_eem_opts	*eem_opts;
+
+	eem_opts = container_of(f->fi, struct f_eem_opts, func_inst);
+	/*
+	 * in drivers/usb/gadget/configfs.c:configfs_composite_bind()
+	 * configurations are bound in sequence with list_for_each_entry,
+	 * in each configuration its functions are bound in sequence
+	 * with list_for_each_entry, so we assume no race condition
+	 * with regard to eem_opts->bound access
+	 */
+	if (!eem_opts->bound) {
+		mutex_lock(&eem_opts->lock);
+		gether_set_gadget(eem_opts->net, cdev->gadget);
+		status = gether_register_netdev(eem_opts->net);
+		mutex_unlock(&eem_opts->lock);
+		if (status)
+			return status;
+		eem_opts->bound = true;
+	}
+
+	us = usb_gstrings_attach(cdev, eem_strings,
+				 ARRAY_SIZE(eem_string_defs));
+	if (IS_ERR(us))
+		return PTR_ERR(us);
+	eem_intf.iInterface = us[0].id;
+
+	/* allocate instance-specific interface IDs */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	eem->ctrl_id = status;
+	eem_intf.bInterfaceNumber = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	ep = usb_ep_autoconfig(cdev->gadget, &eem_fs_in_desc);
+	if (!ep)
+		goto fail;
+	eem->port.in_ep = ep;
+
+	ep = usb_ep_autoconfig(cdev->gadget, &eem_fs_out_desc);
+	if (!ep)
+		goto fail;
+	eem->port.out_ep = ep;
+
+	/* support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+	eem_hs_in_desc.bEndpointAddress = eem_fs_in_desc.bEndpointAddress;
+	eem_hs_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress;
+
+	eem_ss_in_desc.bEndpointAddress = eem_fs_in_desc.bEndpointAddress;
+	eem_ss_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress;
+
+	status = usb_assign_descriptors(f, eem_fs_function, eem_hs_function,
+			eem_ss_function, eem_ss_function);
+	if (status)
+		goto fail;
+
+	DBG(cdev, "CDC Ethernet (EEM): %s speed IN/%s OUT/%s\n",
+			gadget_is_superspeed(c->cdev->gadget) ? "super" :
+			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+			eem->port.in_ep->name, eem->port.out_ep->name);
+	return 0;
+
+fail:
+	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+	return status;
+}
+
+static void eem_cmd_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct in_context *ctx = req->context;
+
+	dev_kfree_skb_any(ctx->skb);
+	kfree(req->buf);
+	usb_ep_free_request(ctx->ep, req);
+	kfree(ctx);
+}
+
+/*
+ * Add the EEM header and ethernet checksum.
+ * We currently do not attempt to put multiple ethernet frames
+ * into a single USB transfer
+ */
+static struct sk_buff *eem_wrap(struct gether *port, struct sk_buff *skb)
+{
+	struct sk_buff	*skb2 = NULL;
+	struct usb_ep	*in = port->in_ep;
+	int		headroom, tailroom, padlen = 0;
+	u16		len;
+
+	if (!skb)
+		return NULL;
+
+	len = skb->len;
+	headroom = skb_headroom(skb);
+	tailroom = skb_tailroom(skb);
+
+	/* When (len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) is 0,
+	 * stick two bytes of zero-length EEM packet on the end.
+	 */
+	if (((len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) == 0)
+		padlen += 2;
+
+	if ((tailroom >= (ETH_FCS_LEN + padlen)) &&
+			(headroom >= EEM_HLEN) && !skb_cloned(skb))
+		goto done;
+
+	skb2 = skb_copy_expand(skb, EEM_HLEN, ETH_FCS_LEN + padlen, GFP_ATOMIC);
+	dev_kfree_skb_any(skb);
+	skb = skb2;
+	if (!skb)
+		return skb;
+
+done:
+	/* use the "no CRC" option */
+	put_unaligned_be32(0xdeadbeef, skb_put(skb, 4));
+
+	/* EEM packet header format:
+	 * b0..13:	length of ethernet frame
+	 * b14:		bmCRC (0 == sentinel CRC)
+	 * b15:		bmType (0 == data)
+	 */
+	len = skb->len;
+	put_unaligned_le16(len & 0x3FFF, skb_push(skb, 2));
+
+	/* add a zero-length EEM packet, if needed */
+	if (padlen)
+		put_unaligned_le16(0, skb_put(skb, 2));
+
+	return skb;
+}
+
+/*
+ * Remove the EEM header.  Note that there can be many EEM packets in a single
+ * USB transfer, so we need to break them out and handle them independently.
+ */
+static int eem_unwrap(struct gether *port,
+			struct sk_buff *skb,
+			struct sk_buff_head *list)
+{
+	struct usb_composite_dev	*cdev = port->func.config->cdev;
+	int				status = 0;
+
+	do {
+		struct sk_buff	*skb2;
+		u16		header;
+		u16		len = 0;
+
+		if (skb->len < EEM_HLEN) {
+			status = -EINVAL;
+			DBG(cdev, "invalid EEM header\n");
+			goto error;
+		}
+
+		/* remove the EEM header */
+		header = get_unaligned_le16(skb->data);
+		skb_pull(skb, EEM_HLEN);
+
+		/* EEM packet header format:
+		 * b0..14:	EEM type dependent (data or command)
+		 * b15:		bmType (0 == data, 1 == command)
+		 */
+		if (header & BIT(15)) {
+			struct usb_request	*req;
+			struct in_context	*ctx;
+			struct usb_ep		*ep;
+			u16			bmEEMCmd;
+
+			/* EEM command packet format:
+			 * b0..10:	bmEEMCmdParam
+			 * b11..13:	bmEEMCmd
+			 * b14:		reserved (must be zero)
+			 * b15:		bmType (1 == command)
+			 */
+			if (header & BIT(14))
+				continue;
+
+			bmEEMCmd = (header >> 11) & 0x7;
+			switch (bmEEMCmd) {
+			case 0: /* echo */
+				len = header & 0x7FF;
+				if (skb->len < len) {
+					status = -EOVERFLOW;
+					goto error;
+				}
+
+				skb2 = skb_clone(skb, GFP_ATOMIC);
+				if (unlikely(!skb2)) {
+					DBG(cdev, "EEM echo response error\n");
+					goto next;
+				}
+				skb_trim(skb2, len);
+				put_unaligned_le16(BIT(15) | BIT(11) | len,
+							skb_push(skb2, 2));
+
+				ep = port->in_ep;
+				req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+				if (!req) {
+					dev_kfree_skb_any(skb2);
+					goto next;
+				}
+
+				req->buf = kmalloc(skb2->len, GFP_KERNEL);
+				if (!req->buf) {
+					usb_ep_free_request(ep, req);
+					dev_kfree_skb_any(skb2);
+					goto next;
+				}
+
+				ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
+				if (!ctx) {
+					kfree(req->buf);
+					usb_ep_free_request(ep, req);
+					dev_kfree_skb_any(skb2);
+					goto next;
+				}
+				ctx->skb = skb2;
+				ctx->ep = ep;
+
+				skb_copy_bits(skb2, 0, req->buf, skb2->len);
+				req->length = skb2->len;
+				req->complete = eem_cmd_complete;
+				req->zero = 1;
+				req->context = ctx;
+				if (usb_ep_queue(port->in_ep, req, GFP_ATOMIC))
+					DBG(cdev, "echo response queue fail\n");
+				break;
+
+			case 1:  /* echo response */
+			case 2:  /* suspend hint */
+			case 3:  /* response hint */
+			case 4:  /* response complete hint */
+			case 5:  /* tickle */
+			default: /* reserved */
+				continue;
+			}
+		} else {
+			u32		crc, crc2;
+			struct sk_buff	*skb3;
+
+			/* check for zero-length EEM packet */
+			if (header == 0)
+				continue;
+
+			/* EEM data packet format:
+			 * b0..13:	length of ethernet frame
+			 * b14:		bmCRC (0 == sentinel, 1 == calculated)
+			 * b15:		bmType (0 == data)
+			 */
+			len = header & 0x3FFF;
+			if ((skb->len < len)
+					|| (len < (ETH_HLEN + ETH_FCS_LEN))) {
+				status = -EINVAL;
+				goto error;
+			}
+
+			/* validate CRC */
+			if (header & BIT(14)) {
+				crc = get_unaligned_le32(skb->data + len
+							- ETH_FCS_LEN);
+				crc2 = ~crc32_le(~0,
+						skb->data, len - ETH_FCS_LEN);
+			} else {
+				crc = get_unaligned_be32(skb->data + len
+							- ETH_FCS_LEN);
+				crc2 = 0xdeadbeef;
+			}
+			if (crc != crc2) {
+				DBG(cdev, "invalid EEM CRC\n");
+				goto next;
+			}
+
+			skb2 = skb_clone(skb, GFP_ATOMIC);
+			if (unlikely(!skb2)) {
+				DBG(cdev, "unable to unframe EEM packet\n");
+				goto next;
+			}
+			skb_trim(skb2, len - ETH_FCS_LEN);
+
+			skb3 = skb_copy_expand(skb2,
+						NET_IP_ALIGN,
+						0,
+						GFP_ATOMIC);
+			if (unlikely(!skb3)) {
+				dev_kfree_skb_any(skb2);
+				goto next;
+			}
+			dev_kfree_skb_any(skb2);
+			skb_queue_tail(list, skb3);
+		}
+next:
+		skb_pull(skb, len);
+	} while (skb->len);
+
+error:
+	dev_kfree_skb_any(skb);
+	return status;
+}
+
+static inline struct f_eem_opts *to_f_eem_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_eem_opts,
+			    func_inst.group);
+}
+
+/* f_eem_item_ops */
+USB_ETHERNET_CONFIGFS_ITEM(eem);
+
+/* f_eem_opts_dev_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(eem);
+
+/* f_eem_opts_host_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(eem);
+
+/* f_eem_opts_qmult */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(eem);
+
+/* f_eem_opts_ifname */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(eem);
+
+static struct configfs_attribute *eem_attrs[] = {
+	&eem_opts_attr_dev_addr,
+	&eem_opts_attr_host_addr,
+	&eem_opts_attr_qmult,
+	&eem_opts_attr_ifname,
+	NULL,
+};
+
+static const struct config_item_type eem_func_type = {
+	.ct_item_ops	= &eem_item_ops,
+	.ct_attrs	= eem_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void eem_free_inst(struct usb_function_instance *f)
+{
+	struct f_eem_opts *opts;
+
+	opts = container_of(f, struct f_eem_opts, func_inst);
+	if (opts->bound)
+		gether_cleanup(netdev_priv(opts->net));
+	else
+		free_netdev(opts->net);
+	kfree(opts);
+}
+
+static struct usb_function_instance *eem_alloc_inst(void)
+{
+	struct f_eem_opts *opts;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+	mutex_init(&opts->lock);
+	opts->func_inst.free_func_inst = eem_free_inst;
+	opts->net = gether_setup_default();
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
+
+	config_group_init_type_name(&opts->func_inst.group, "", &eem_func_type);
+
+	return &opts->func_inst;
+}
+
+static void eem_free(struct usb_function *f)
+{
+	struct f_eem *eem;
+	struct f_eem_opts *opts;
+
+	eem = func_to_eem(f);
+	opts = container_of(f->fi, struct f_eem_opts, func_inst);
+	kfree(eem);
+	mutex_lock(&opts->lock);
+	opts->refcnt--;
+	mutex_unlock(&opts->lock);
+}
+
+static void eem_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	DBG(c->cdev, "eem unbind\n");
+
+	usb_free_all_descriptors(f);
+}
+
+static struct usb_function *eem_alloc(struct usb_function_instance *fi)
+{
+	struct f_eem	*eem;
+	struct f_eem_opts *opts;
+
+	/* allocate and initialize one new instance */
+	eem = kzalloc(sizeof(*eem), GFP_KERNEL);
+	if (!eem)
+		return ERR_PTR(-ENOMEM);
+
+	opts = container_of(fi, struct f_eem_opts, func_inst);
+	mutex_lock(&opts->lock);
+	opts->refcnt++;
+
+	eem->port.ioport = netdev_priv(opts->net);
+	mutex_unlock(&opts->lock);
+	eem->port.cdc_filter = DEFAULT_FILTER;
+
+	eem->port.func.name = "cdc_eem";
+	/* descriptors are per-instance copies */
+	eem->port.func.bind = eem_bind;
+	eem->port.func.unbind = eem_unbind;
+	eem->port.func.set_alt = eem_set_alt;
+	eem->port.func.setup = eem_setup;
+	eem->port.func.disable = eem_disable;
+	eem->port.func.free_func = eem_free;
+	eem->port.wrap = eem_wrap;
+	eem->port.unwrap = eem_unwrap;
+	eem->port.header_len = EEM_HLEN;
+
+	return &eem->port.func;
+}
+
+DECLARE_USB_FUNCTION_INIT(eem, eem_alloc_inst, eem_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
new file mode 100644
index 000000000..3e59055aa
--- /dev/null
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -0,0 +1,3894 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_fs.c -- user mode file system API for USB composite function controllers
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ * Author: Michal Nazarewicz <mina86@mina86.com>
+ *
+ * Based on inode.c (GadgetFS) which was:
+ * Copyright (C) 2003-2004 David Brownell
+ * Copyright (C) 2003 Agilent Technologies
+ */
+
+
+/* #define DEBUG */
+/* #define VERBOSE_DEBUG */
+
+#include <linux/blkdev.h>
+#include <linux/pagemap.h>
+#include <linux/export.h>
+#include <linux/fs_parser.h>
+#include <linux/hid.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/scatterlist.h>
+#include <linux/sched/signal.h>
+#include <linux/uio.h>
+#include <linux/vmalloc.h>
+#include <asm/unaligned.h>
+
+#include <linux/usb/ccid.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/functionfs.h>
+
+#include <linux/aio.h>
+#include <linux/kthread.h>
+#include <linux/poll.h>
+#include <linux/eventfd.h>
+
+#include "u_fs.h"
+#include "u_f.h"
+#include "u_os_desc.h"
+#include "configfs.h"
+
+#define FUNCTIONFS_MAGIC	0xa647361 /* Chosen by a honest dice roll ;) */
+
+/* Reference counter handling */
+static void ffs_data_get(struct ffs_data *ffs);
+static void ffs_data_put(struct ffs_data *ffs);
+/* Creates new ffs_data object. */
+static struct ffs_data *__must_check ffs_data_new(const char *dev_name)
+	__attribute__((malloc));
+
+/* Opened counter handling. */
+static void ffs_data_opened(struct ffs_data *ffs);
+static void ffs_data_closed(struct ffs_data *ffs);
+
+/* Called with ffs->mutex held; take over ownership of data. */
+static int __must_check
+__ffs_data_got_descs(struct ffs_data *ffs, char *data, size_t len);
+static int __must_check
+__ffs_data_got_strings(struct ffs_data *ffs, char *data, size_t len);
+
+
+/* The function structure ***************************************************/
+
+struct ffs_ep;
+
+struct ffs_function {
+	struct usb_configuration	*conf;
+	struct usb_gadget		*gadget;
+	struct ffs_data			*ffs;
+
+	struct ffs_ep			*eps;
+	u8				eps_revmap[16];
+	short				*interfaces_nums;
+
+	struct usb_function		function;
+};
+
+
+static struct ffs_function *ffs_func_from_usb(struct usb_function *f)
+{
+	return container_of(f, struct ffs_function, function);
+}
+
+
+static inline enum ffs_setup_state
+ffs_setup_state_clear_cancelled(struct ffs_data *ffs)
+{
+	return (enum ffs_setup_state)
+		cmpxchg(&ffs->setup_state, FFS_SETUP_CANCELLED, FFS_NO_SETUP);
+}
+
+
+static void ffs_func_eps_disable(struct ffs_function *func);
+static int __must_check ffs_func_eps_enable(struct ffs_function *func);
+
+static int ffs_func_bind(struct usb_configuration *,
+			 struct usb_function *);
+static int ffs_func_set_alt(struct usb_function *, unsigned, unsigned);
+static void ffs_func_disable(struct usb_function *);
+static int ffs_func_setup(struct usb_function *,
+			  const struct usb_ctrlrequest *);
+static bool ffs_func_req_match(struct usb_function *,
+			       const struct usb_ctrlrequest *,
+			       bool config0);
+static void ffs_func_suspend(struct usb_function *);
+static void ffs_func_resume(struct usb_function *);
+
+
+static int ffs_func_revmap_ep(struct ffs_function *func, u8 num);
+static int ffs_func_revmap_intf(struct ffs_function *func, u8 intf);
+
+
+/* The endpoints structures *************************************************/
+
+struct ffs_ep {
+	struct usb_ep			*ep;	/* P: ffs->eps_lock */
+	struct usb_request		*req;	/* P: epfile->mutex */
+
+	/* [0]: full speed, [1]: high speed, [2]: super speed */
+	struct usb_endpoint_descriptor	*descs[3];
+
+	u8				num;
+};
+
+struct ffs_epfile {
+	/* Protects ep->ep and ep->req. */
+	struct mutex			mutex;
+
+	struct ffs_data			*ffs;
+	struct ffs_ep			*ep;	/* P: ffs->eps_lock */
+
+	struct dentry			*dentry;
+
+	/*
+	 * Buffer for holding data from partial reads which may happen since
+	 * we’re rounding user read requests to a multiple of a max packet size.
+	 *
+	 * The pointer is initialised with NULL value and may be set by
+	 * __ffs_epfile_read_data function to point to a temporary buffer.
+	 *
+	 * In normal operation, calls to __ffs_epfile_read_buffered will consume
+	 * data from said buffer and eventually free it.  Importantly, while the
+	 * function is using the buffer, it sets the pointer to NULL.  This is
+	 * all right since __ffs_epfile_read_data and __ffs_epfile_read_buffered
+	 * can never run concurrently (they are synchronised by epfile->mutex)
+	 * so the latter will not assign a new value to the pointer.
+	 *
+	 * Meanwhile ffs_func_eps_disable frees the buffer (if the pointer is
+	 * valid) and sets the pointer to READ_BUFFER_DROP value.  This special
+	 * value is crux of the synchronisation between ffs_func_eps_disable and
+	 * __ffs_epfile_read_data.
+	 *
+	 * Once __ffs_epfile_read_data is about to finish it will try to set the
+	 * pointer back to its old value (as described above), but seeing as the
+	 * pointer is not-NULL (namely READ_BUFFER_DROP) it will instead free
+	 * the buffer.
+	 *
+	 * == State transitions ==
+	 *
+	 * • ptr == NULL:  (initial state)
+	 *   ◦ __ffs_epfile_read_buffer_free: go to ptr == DROP
+	 *   ◦ __ffs_epfile_read_buffered:    nop
+	 *   ◦ __ffs_epfile_read_data allocates temp buffer: go to ptr == buf
+	 *   ◦ reading finishes:              n/a, not in ‘and reading’ state
+	 * • ptr == DROP:
+	 *   ◦ __ffs_epfile_read_buffer_free: nop
+	 *   ◦ __ffs_epfile_read_buffered:    go to ptr == NULL
+	 *   ◦ __ffs_epfile_read_data allocates temp buffer: free buf, nop
+	 *   ◦ reading finishes:              n/a, not in ‘and reading’ state
+	 * • ptr == buf:
+	 *   ◦ __ffs_epfile_read_buffer_free: free buf, go to ptr == DROP
+	 *   ◦ __ffs_epfile_read_buffered:    go to ptr == NULL and reading
+	 *   ◦ __ffs_epfile_read_data:        n/a, __ffs_epfile_read_buffered
+	 *                                    is always called first
+	 *   ◦ reading finishes:              n/a, not in ‘and reading’ state
+	 * • ptr == NULL and reading:
+	 *   ◦ __ffs_epfile_read_buffer_free: go to ptr == DROP and reading
+	 *   ◦ __ffs_epfile_read_buffered:    n/a, mutex is held
+	 *   ◦ __ffs_epfile_read_data:        n/a, mutex is held
+	 *   ◦ reading finishes and …
+	 *     … all data read:               free buf, go to ptr == NULL
+	 *     … otherwise:                   go to ptr == buf and reading
+	 * • ptr == DROP and reading:
+	 *   ◦ __ffs_epfile_read_buffer_free: nop
+	 *   ◦ __ffs_epfile_read_buffered:    n/a, mutex is held
+	 *   ◦ __ffs_epfile_read_data:        n/a, mutex is held
+	 *   ◦ reading finishes:              free buf, go to ptr == DROP
+	 */
+	struct ffs_buffer		*read_buffer;
+#define READ_BUFFER_DROP ((struct ffs_buffer *)ERR_PTR(-ESHUTDOWN))
+
+	char				name[5];
+
+	unsigned char			in;	/* P: ffs->eps_lock */
+	unsigned char			isoc;	/* P: ffs->eps_lock */
+
+	unsigned char			_pad;
+};
+
+struct ffs_buffer {
+	size_t length;
+	char *data;
+	char storage[];
+};
+
+/*  ffs_io_data structure ***************************************************/
+
+struct ffs_io_data {
+	bool aio;
+	bool read;
+
+	struct kiocb *kiocb;
+	struct iov_iter data;
+	const void *to_free;
+	char *buf;
+
+	struct mm_struct *mm;
+	struct work_struct work;
+
+	struct usb_ep *ep;
+	struct usb_request *req;
+	struct sg_table sgt;
+	bool use_sg;
+
+	struct ffs_data *ffs;
+
+	int status;
+	struct completion done;
+};
+
+struct ffs_desc_helper {
+	struct ffs_data *ffs;
+	unsigned interfaces_count;
+	unsigned eps_count;
+};
+
+static int  __must_check ffs_epfiles_create(struct ffs_data *ffs);
+static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count);
+
+static struct dentry *
+ffs_sb_create_file(struct super_block *sb, const char *name, void *data,
+		   const struct file_operations *fops);
+
+/* Devices management *******************************************************/
+
+DEFINE_MUTEX(ffs_lock);
+EXPORT_SYMBOL_GPL(ffs_lock);
+
+static struct ffs_dev *_ffs_find_dev(const char *name);
+static struct ffs_dev *_ffs_alloc_dev(void);
+static void _ffs_free_dev(struct ffs_dev *dev);
+static int ffs_acquire_dev(const char *dev_name, struct ffs_data *ffs_data);
+static void ffs_release_dev(struct ffs_dev *ffs_dev);
+static int ffs_ready(struct ffs_data *ffs);
+static void ffs_closed(struct ffs_data *ffs);
+
+/* Misc helper functions ****************************************************/
+
+static int ffs_mutex_lock(struct mutex *mutex, unsigned nonblock)
+	__attribute__((warn_unused_result, nonnull));
+static char *ffs_prepare_buffer(const char __user *buf, size_t len)
+	__attribute__((warn_unused_result, nonnull));
+
+
+/* Control file aka ep0 *****************************************************/
+
+static void ffs_ep0_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct ffs_data *ffs = req->context;
+
+	complete(&ffs->ep0req_completion);
+}
+
+static int __ffs_ep0_queue_wait(struct ffs_data *ffs, char *data, size_t len)
+	__releases(&ffs->ev.waitq.lock)
+{
+	struct usb_request *req = ffs->ep0req;
+	int ret;
+
+	if (!req) {
+		spin_unlock_irq(&ffs->ev.waitq.lock);
+		return -EINVAL;
+	}
+
+	req->zero     = len < le16_to_cpu(ffs->ev.setup.wLength);
+
+	spin_unlock_irq(&ffs->ev.waitq.lock);
+
+	req->buf      = data;
+	req->length   = len;
+
+	/*
+	 * UDC layer requires to provide a buffer even for ZLP, but should
+	 * not use it at all. Let's provide some poisoned pointer to catch
+	 * possible bug in the driver.
+	 */
+	if (req->buf == NULL)
+		req->buf = (void *)0xDEADBABE;
+
+	reinit_completion(&ffs->ep0req_completion);
+
+	ret = usb_ep_queue(ffs->gadget->ep0, req, GFP_ATOMIC);
+	if (ret < 0)
+		return ret;
+
+	ret = wait_for_completion_interruptible(&ffs->ep0req_completion);
+	if (ret) {
+		usb_ep_dequeue(ffs->gadget->ep0, req);
+		return -EINTR;
+	}
+
+	ffs->setup_state = FFS_NO_SETUP;
+	return req->status ? req->status : req->actual;
+}
+
+static int __ffs_ep0_stall(struct ffs_data *ffs)
+{
+	if (ffs->ev.can_stall) {
+		pr_vdebug("ep0 stall\n");
+		usb_ep_set_halt(ffs->gadget->ep0);
+		ffs->setup_state = FFS_NO_SETUP;
+		return -EL2HLT;
+	} else {
+		pr_debug("bogus ep0 stall!\n");
+		return -ESRCH;
+	}
+}
+
+static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
+			     size_t len, loff_t *ptr)
+{
+	struct ffs_data *ffs = file->private_data;
+	ssize_t ret;
+	char *data;
+
+	ENTER();
+
+	/* Fast check if setup was canceled */
+	if (ffs_setup_state_clear_cancelled(ffs) == FFS_SETUP_CANCELLED)
+		return -EIDRM;
+
+	/* Acquire mutex */
+	ret = ffs_mutex_lock(&ffs->mutex, file->f_flags & O_NONBLOCK);
+	if (ret < 0)
+		return ret;
+
+	/* Check state */
+	switch (ffs->state) {
+	case FFS_READ_DESCRIPTORS:
+	case FFS_READ_STRINGS:
+		/* Copy data */
+		if (len < 16) {
+			ret = -EINVAL;
+			break;
+		}
+
+		data = ffs_prepare_buffer(buf, len);
+		if (IS_ERR(data)) {
+			ret = PTR_ERR(data);
+			break;
+		}
+
+		/* Handle data */
+		if (ffs->state == FFS_READ_DESCRIPTORS) {
+			pr_info("read descriptors\n");
+			ret = __ffs_data_got_descs(ffs, data, len);
+			if (ret < 0)
+				break;
+
+			ffs->state = FFS_READ_STRINGS;
+			ret = len;
+		} else {
+			pr_info("read strings\n");
+			ret = __ffs_data_got_strings(ffs, data, len);
+			if (ret < 0)
+				break;
+
+			ret = ffs_epfiles_create(ffs);
+			if (ret) {
+				ffs->state = FFS_CLOSING;
+				break;
+			}
+
+			ffs->state = FFS_ACTIVE;
+			mutex_unlock(&ffs->mutex);
+
+			ret = ffs_ready(ffs);
+			if (ret < 0) {
+				ffs->state = FFS_CLOSING;
+				return ret;
+			}
+
+			return len;
+		}
+		break;
+
+	case FFS_ACTIVE:
+		data = NULL;
+		/*
+		 * We're called from user space, we can use _irq
+		 * rather then _irqsave
+		 */
+		spin_lock_irq(&ffs->ev.waitq.lock);
+		switch (ffs_setup_state_clear_cancelled(ffs)) {
+		case FFS_SETUP_CANCELLED:
+			ret = -EIDRM;
+			goto done_spin;
+
+		case FFS_NO_SETUP:
+			ret = -ESRCH;
+			goto done_spin;
+
+		case FFS_SETUP_PENDING:
+			break;
+		}
+
+		/* FFS_SETUP_PENDING */
+		if (!(ffs->ev.setup.bRequestType & USB_DIR_IN)) {
+			spin_unlock_irq(&ffs->ev.waitq.lock);
+			ret = __ffs_ep0_stall(ffs);
+			break;
+		}
+
+		/* FFS_SETUP_PENDING and not stall */
+		len = min(len, (size_t)le16_to_cpu(ffs->ev.setup.wLength));
+
+		spin_unlock_irq(&ffs->ev.waitq.lock);
+
+		data = ffs_prepare_buffer(buf, len);
+		if (IS_ERR(data)) {
+			ret = PTR_ERR(data);
+			break;
+		}
+
+		spin_lock_irq(&ffs->ev.waitq.lock);
+
+		/*
+		 * We are guaranteed to be still in FFS_ACTIVE state
+		 * but the state of setup could have changed from
+		 * FFS_SETUP_PENDING to FFS_SETUP_CANCELLED so we need
+		 * to check for that.  If that happened we copied data
+		 * from user space in vain but it's unlikely.
+		 *
+		 * For sure we are not in FFS_NO_SETUP since this is
+		 * the only place FFS_SETUP_PENDING -> FFS_NO_SETUP
+		 * transition can be performed and it's protected by
+		 * mutex.
+		 */
+		if (ffs_setup_state_clear_cancelled(ffs) ==
+		    FFS_SETUP_CANCELLED) {
+			ret = -EIDRM;
+done_spin:
+			spin_unlock_irq(&ffs->ev.waitq.lock);
+		} else {
+			/* unlocks spinlock */
+			ret = __ffs_ep0_queue_wait(ffs, data, len);
+		}
+		kfree(data);
+		break;
+
+	default:
+		ret = -EBADFD;
+		break;
+	}
+
+	mutex_unlock(&ffs->mutex);
+	return ret;
+}
+
+/* Called with ffs->ev.waitq.lock and ffs->mutex held, both released on exit. */
+static ssize_t __ffs_ep0_read_events(struct ffs_data *ffs, char __user *buf,
+				     size_t n)
+	__releases(&ffs->ev.waitq.lock)
+{
+	/*
+	 * n cannot be bigger than ffs->ev.count, which cannot be bigger than
+	 * size of ffs->ev.types array (which is four) so that's how much space
+	 * we reserve.
+	 */
+	struct usb_functionfs_event events[ARRAY_SIZE(ffs->ev.types)];
+	const size_t size = n * sizeof *events;
+	unsigned i = 0;
+
+	memset(events, 0, size);
+
+	do {
+		events[i].type = ffs->ev.types[i];
+		if (events[i].type == FUNCTIONFS_SETUP) {
+			events[i].u.setup = ffs->ev.setup;
+			ffs->setup_state = FFS_SETUP_PENDING;
+		}
+	} while (++i < n);
+
+	ffs->ev.count -= n;
+	if (ffs->ev.count)
+		memmove(ffs->ev.types, ffs->ev.types + n,
+			ffs->ev.count * sizeof *ffs->ev.types);
+
+	spin_unlock_irq(&ffs->ev.waitq.lock);
+	mutex_unlock(&ffs->mutex);
+
+	return copy_to_user(buf, events, size) ? -EFAULT : size;
+}
+
+static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
+			    size_t len, loff_t *ptr)
+{
+	struct ffs_data *ffs = file->private_data;
+	char *data = NULL;
+	size_t n;
+	int ret;
+
+	ENTER();
+
+	/* Fast check if setup was canceled */
+	if (ffs_setup_state_clear_cancelled(ffs) == FFS_SETUP_CANCELLED)
+		return -EIDRM;
+
+	/* Acquire mutex */
+	ret = ffs_mutex_lock(&ffs->mutex, file->f_flags & O_NONBLOCK);
+	if (ret < 0)
+		return ret;
+
+	/* Check state */
+	if (ffs->state != FFS_ACTIVE) {
+		ret = -EBADFD;
+		goto done_mutex;
+	}
+
+	/*
+	 * We're called from user space, we can use _irq rather then
+	 * _irqsave
+	 */
+	spin_lock_irq(&ffs->ev.waitq.lock);
+
+	switch (ffs_setup_state_clear_cancelled(ffs)) {
+	case FFS_SETUP_CANCELLED:
+		ret = -EIDRM;
+		break;
+
+	case FFS_NO_SETUP:
+		n = len / sizeof(struct usb_functionfs_event);
+		if (!n) {
+			ret = -EINVAL;
+			break;
+		}
+
+		if ((file->f_flags & O_NONBLOCK) && !ffs->ev.count) {
+			ret = -EAGAIN;
+			break;
+		}
+
+		if (wait_event_interruptible_exclusive_locked_irq(ffs->ev.waitq,
+							ffs->ev.count)) {
+			ret = -EINTR;
+			break;
+		}
+
+		/* unlocks spinlock */
+		return __ffs_ep0_read_events(ffs, buf,
+					     min(n, (size_t)ffs->ev.count));
+
+	case FFS_SETUP_PENDING:
+		if (ffs->ev.setup.bRequestType & USB_DIR_IN) {
+			spin_unlock_irq(&ffs->ev.waitq.lock);
+			ret = __ffs_ep0_stall(ffs);
+			goto done_mutex;
+		}
+
+		len = min(len, (size_t)le16_to_cpu(ffs->ev.setup.wLength));
+
+		spin_unlock_irq(&ffs->ev.waitq.lock);
+
+		if (len) {
+			data = kmalloc(len, GFP_KERNEL);
+			if (!data) {
+				ret = -ENOMEM;
+				goto done_mutex;
+			}
+		}
+
+		spin_lock_irq(&ffs->ev.waitq.lock);
+
+		/* See ffs_ep0_write() */
+		if (ffs_setup_state_clear_cancelled(ffs) ==
+		    FFS_SETUP_CANCELLED) {
+			ret = -EIDRM;
+			break;
+		}
+
+		/* unlocks spinlock */
+		ret = __ffs_ep0_queue_wait(ffs, data, len);
+		if ((ret > 0) && (copy_to_user(buf, data, len)))
+			ret = -EFAULT;
+		goto done_mutex;
+
+	default:
+		ret = -EBADFD;
+		break;
+	}
+
+	spin_unlock_irq(&ffs->ev.waitq.lock);
+done_mutex:
+	mutex_unlock(&ffs->mutex);
+	kfree(data);
+	return ret;
+}
+
+static int ffs_ep0_open(struct inode *inode, struct file *file)
+{
+	struct ffs_data *ffs = inode->i_private;
+
+	ENTER();
+
+	if (ffs->state == FFS_CLOSING)
+		return -EBUSY;
+
+	file->private_data = ffs;
+	ffs_data_opened(ffs);
+
+	return stream_open(inode, file);
+}
+
+static int ffs_ep0_release(struct inode *inode, struct file *file)
+{
+	struct ffs_data *ffs = file->private_data;
+
+	ENTER();
+
+	ffs_data_closed(ffs);
+
+	return 0;
+}
+
+static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value)
+{
+	struct ffs_data *ffs = file->private_data;
+	struct usb_gadget *gadget = ffs->gadget;
+	long ret;
+
+	ENTER();
+
+	if (code == FUNCTIONFS_INTERFACE_REVMAP) {
+		struct ffs_function *func = ffs->func;
+		ret = func ? ffs_func_revmap_intf(func, value) : -ENODEV;
+	} else if (gadget && gadget->ops->ioctl) {
+		ret = gadget->ops->ioctl(gadget, code, value);
+	} else {
+		ret = -ENOTTY;
+	}
+
+	return ret;
+}
+
+static __poll_t ffs_ep0_poll(struct file *file, poll_table *wait)
+{
+	struct ffs_data *ffs = file->private_data;
+	__poll_t mask = EPOLLWRNORM;
+	int ret;
+
+	poll_wait(file, &ffs->ev.waitq, wait);
+
+	ret = ffs_mutex_lock(&ffs->mutex, file->f_flags & O_NONBLOCK);
+	if (ret < 0)
+		return mask;
+
+	switch (ffs->state) {
+	case FFS_READ_DESCRIPTORS:
+	case FFS_READ_STRINGS:
+		mask |= EPOLLOUT;
+		break;
+
+	case FFS_ACTIVE:
+		switch (ffs->setup_state) {
+		case FFS_NO_SETUP:
+			if (ffs->ev.count)
+				mask |= EPOLLIN;
+			break;
+
+		case FFS_SETUP_PENDING:
+		case FFS_SETUP_CANCELLED:
+			mask |= (EPOLLIN | EPOLLOUT);
+			break;
+		}
+		break;
+
+	case FFS_CLOSING:
+		break;
+	case FFS_DEACTIVATED:
+		break;
+	}
+
+	mutex_unlock(&ffs->mutex);
+
+	return mask;
+}
+
+static const struct file_operations ffs_ep0_operations = {
+	.llseek =	no_llseek,
+
+	.open =		ffs_ep0_open,
+	.write =	ffs_ep0_write,
+	.read =		ffs_ep0_read,
+	.release =	ffs_ep0_release,
+	.unlocked_ioctl =	ffs_ep0_ioctl,
+	.poll =		ffs_ep0_poll,
+};
+
+
+/* "Normal" endpoints operations ********************************************/
+
+static void ffs_epfile_io_complete(struct usb_ep *_ep, struct usb_request *req)
+{
+	struct ffs_io_data *io_data = req->context;
+
+	ENTER();
+	if (req->status)
+		io_data->status = req->status;
+	else
+		io_data->status = req->actual;
+
+	complete(&io_data->done);
+}
+
+static ssize_t ffs_copy_to_iter(void *data, int data_len, struct iov_iter *iter)
+{
+	ssize_t ret = copy_to_iter(data, data_len, iter);
+	if (ret == data_len)
+		return ret;
+
+	if (iov_iter_count(iter))
+		return -EFAULT;
+
+	/*
+	 * Dear user space developer!
+	 *
+	 * TL;DR: To stop getting below error message in your kernel log, change
+	 * user space code using functionfs to align read buffers to a max
+	 * packet size.
+	 *
+	 * Some UDCs (e.g. dwc3) require request sizes to be a multiple of a max
+	 * packet size.  When unaligned buffer is passed to functionfs, it
+	 * internally uses a larger, aligned buffer so that such UDCs are happy.
+	 *
+	 * Unfortunately, this means that host may send more data than was
+	 * requested in read(2) system call.  f_fs doesn’t know what to do with
+	 * that excess data so it simply drops it.
+	 *
+	 * Was the buffer aligned in the first place, no such problem would
+	 * happen.
+	 *
+	 * Data may be dropped only in AIO reads.  Synchronous reads are handled
+	 * by splitting a request into multiple parts.  This splitting may still
+	 * be a problem though so it’s likely best to align the buffer
+	 * regardless of it being AIO or not..
+	 *
+	 * This only affects OUT endpoints, i.e. reading data with a read(2),
+	 * aio_read(2) etc. system calls.  Writing data to an IN endpoint is not
+	 * affected.
+	 */
+	pr_err("functionfs read size %d > requested size %zd, dropping excess data. "
+	       "Align read buffer size to max packet size to avoid the problem.\n",
+	       data_len, ret);
+
+	return ret;
+}
+
+/*
+ * allocate a virtually contiguous buffer and create a scatterlist describing it
+ * @sg_table	- pointer to a place to be filled with sg_table contents
+ * @size	- required buffer size
+ */
+static void *ffs_build_sg_list(struct sg_table *sgt, size_t sz)
+{
+	struct page **pages;
+	void *vaddr, *ptr;
+	unsigned int n_pages;
+	int i;
+
+	vaddr = vmalloc(sz);
+	if (!vaddr)
+		return NULL;
+
+	n_pages = PAGE_ALIGN(sz) >> PAGE_SHIFT;
+	pages = kvmalloc_array(n_pages, sizeof(struct page *), GFP_KERNEL);
+	if (!pages) {
+		vfree(vaddr);
+
+		return NULL;
+	}
+	for (i = 0, ptr = vaddr; i < n_pages; ++i, ptr += PAGE_SIZE)
+		pages[i] = vmalloc_to_page(ptr);
+
+	if (sg_alloc_table_from_pages(sgt, pages, n_pages, 0, sz, GFP_KERNEL)) {
+		kvfree(pages);
+		vfree(vaddr);
+
+		return NULL;
+	}
+	kvfree(pages);
+
+	return vaddr;
+}
+
+static inline void *ffs_alloc_buffer(struct ffs_io_data *io_data,
+	size_t data_len)
+{
+	if (io_data->use_sg)
+		return ffs_build_sg_list(&io_data->sgt, data_len);
+
+	return kmalloc(data_len, GFP_KERNEL);
+}
+
+static inline void ffs_free_buffer(struct ffs_io_data *io_data)
+{
+	if (!io_data->buf)
+		return;
+
+	if (io_data->use_sg) {
+		sg_free_table(&io_data->sgt);
+		vfree(io_data->buf);
+	} else {
+		kfree(io_data->buf);
+	}
+}
+
+static void ffs_user_copy_worker(struct work_struct *work)
+{
+	struct ffs_io_data *io_data = container_of(work, struct ffs_io_data,
+						   work);
+	int ret = io_data->req->status ? io_data->req->status :
+					 io_data->req->actual;
+	bool kiocb_has_eventfd = io_data->kiocb->ki_flags & IOCB_EVENTFD;
+
+	if (io_data->read && ret > 0) {
+		kthread_use_mm(io_data->mm);
+		ret = ffs_copy_to_iter(io_data->buf, ret, &io_data->data);
+		kthread_unuse_mm(io_data->mm);
+	}
+
+	io_data->kiocb->ki_complete(io_data->kiocb, ret);
+
+	if (io_data->ffs->ffs_eventfd && !kiocb_has_eventfd)
+		eventfd_signal(io_data->ffs->ffs_eventfd, 1);
+
+	usb_ep_free_request(io_data->ep, io_data->req);
+
+	if (io_data->read)
+		kfree(io_data->to_free);
+	ffs_free_buffer(io_data);
+	kfree(io_data);
+}
+
+static void ffs_epfile_async_io_complete(struct usb_ep *_ep,
+					 struct usb_request *req)
+{
+	struct ffs_io_data *io_data = req->context;
+	struct ffs_data *ffs = io_data->ffs;
+
+	ENTER();
+
+	INIT_WORK(&io_data->work, ffs_user_copy_worker);
+	queue_work(ffs->io_completion_wq, &io_data->work);
+}
+
+static void __ffs_epfile_read_buffer_free(struct ffs_epfile *epfile)
+{
+	/*
+	 * See comment in struct ffs_epfile for full read_buffer pointer
+	 * synchronisation story.
+	 */
+	struct ffs_buffer *buf = xchg(&epfile->read_buffer, READ_BUFFER_DROP);
+	if (buf && buf != READ_BUFFER_DROP)
+		kfree(buf);
+}
+
+/* Assumes epfile->mutex is held. */
+static ssize_t __ffs_epfile_read_buffered(struct ffs_epfile *epfile,
+					  struct iov_iter *iter)
+{
+	/*
+	 * Null out epfile->read_buffer so ffs_func_eps_disable does not free
+	 * the buffer while we are using it.  See comment in struct ffs_epfile
+	 * for full read_buffer pointer synchronisation story.
+	 */
+	struct ffs_buffer *buf = xchg(&epfile->read_buffer, NULL);
+	ssize_t ret;
+	if (!buf || buf == READ_BUFFER_DROP)
+		return 0;
+
+	ret = copy_to_iter(buf->data, buf->length, iter);
+	if (buf->length == ret) {
+		kfree(buf);
+		return ret;
+	}
+
+	if (iov_iter_count(iter)) {
+		ret = -EFAULT;
+	} else {
+		buf->length -= ret;
+		buf->data += ret;
+	}
+
+	if (cmpxchg(&epfile->read_buffer, NULL, buf))
+		kfree(buf);
+
+	return ret;
+}
+
+/* Assumes epfile->mutex is held. */
+static ssize_t __ffs_epfile_read_data(struct ffs_epfile *epfile,
+				      void *data, int data_len,
+				      struct iov_iter *iter)
+{
+	struct ffs_buffer *buf;
+
+	ssize_t ret = copy_to_iter(data, data_len, iter);
+	if (data_len == ret)
+		return ret;
+
+	if (iov_iter_count(iter))
+		return -EFAULT;
+
+	/* See ffs_copy_to_iter for more context. */
+	pr_warn("functionfs read size %d > requested size %zd, splitting request into multiple reads.",
+		data_len, ret);
+
+	data_len -= ret;
+	buf = kmalloc(struct_size(buf, storage, data_len), GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	buf->length = data_len;
+	buf->data = buf->storage;
+	memcpy(buf->storage, data + ret, flex_array_size(buf, storage, data_len));
+
+	/*
+	 * At this point read_buffer is NULL or READ_BUFFER_DROP (if
+	 * ffs_func_eps_disable has been called in the meanwhile).  See comment
+	 * in struct ffs_epfile for full read_buffer pointer synchronisation
+	 * story.
+	 */
+	if (cmpxchg(&epfile->read_buffer, NULL, buf))
+		kfree(buf);
+
+	return ret;
+}
+
+static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
+{
+	struct ffs_epfile *epfile = file->private_data;
+	struct usb_request *req;
+	struct ffs_ep *ep;
+	char *data = NULL;
+	ssize_t ret, data_len = -EINVAL;
+	int halt;
+
+	/* Are we still active? */
+	if (WARN_ON(epfile->ffs->state != FFS_ACTIVE))
+		return -ENODEV;
+
+	/* Wait for endpoint to be enabled */
+	ep = epfile->ep;
+	if (!ep) {
+		if (file->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		ret = wait_event_interruptible(
+				epfile->ffs->wait, (ep = epfile->ep));
+		if (ret)
+			return -EINTR;
+	}
+
+	/* Do we halt? */
+	halt = (!io_data->read == !epfile->in);
+	if (halt && epfile->isoc)
+		return -EINVAL;
+
+	/* We will be using request and read_buffer */
+	ret = ffs_mutex_lock(&epfile->mutex, file->f_flags & O_NONBLOCK);
+	if (ret)
+		goto error;
+
+	/* Allocate & copy */
+	if (!halt) {
+		struct usb_gadget *gadget;
+
+		/*
+		 * Do we have buffered data from previous partial read?  Check
+		 * that for synchronous case only because we do not have
+		 * facility to ‘wake up’ a pending asynchronous read and push
+		 * buffered data to it which we would need to make things behave
+		 * consistently.
+		 */
+		if (!io_data->aio && io_data->read) {
+			ret = __ffs_epfile_read_buffered(epfile, &io_data->data);
+			if (ret)
+				goto error_mutex;
+		}
+
+		/*
+		 * if we _do_ wait above, the epfile->ffs->gadget might be NULL
+		 * before the waiting completes, so do not assign to 'gadget'
+		 * earlier
+		 */
+		gadget = epfile->ffs->gadget;
+
+		spin_lock_irq(&epfile->ffs->eps_lock);
+		/* In the meantime, endpoint got disabled or changed. */
+		if (epfile->ep != ep) {
+			ret = -ESHUTDOWN;
+			goto error_lock;
+		}
+		data_len = iov_iter_count(&io_data->data);
+		/*
+		 * Controller may require buffer size to be aligned to
+		 * maxpacketsize of an out endpoint.
+		 */
+		if (io_data->read)
+			data_len = usb_ep_align_maybe(gadget, ep->ep, data_len);
+
+		io_data->use_sg = gadget->sg_supported && data_len > PAGE_SIZE;
+		spin_unlock_irq(&epfile->ffs->eps_lock);
+
+		data = ffs_alloc_buffer(io_data, data_len);
+		if (!data) {
+			ret = -ENOMEM;
+			goto error_mutex;
+		}
+		if (!io_data->read &&
+		    !copy_from_iter_full(data, data_len, &io_data->data)) {
+			ret = -EFAULT;
+			goto error_mutex;
+		}
+	}
+
+	spin_lock_irq(&epfile->ffs->eps_lock);
+
+	if (epfile->ep != ep) {
+		/* In the meantime, endpoint got disabled or changed. */
+		ret = -ESHUTDOWN;
+	} else if (halt) {
+		ret = usb_ep_set_halt(ep->ep);
+		if (!ret)
+			ret = -EBADMSG;
+	} else if (data_len == -EINVAL) {
+		/*
+		 * Sanity Check: even though data_len can't be used
+		 * uninitialized at the time I write this comment, some
+		 * compilers complain about this situation.
+		 * In order to keep the code clean from warnings, data_len is
+		 * being initialized to -EINVAL during its declaration, which
+		 * means we can't rely on compiler anymore to warn no future
+		 * changes won't result in data_len being used uninitialized.
+		 * For such reason, we're adding this redundant sanity check
+		 * here.
+		 */
+		WARN(1, "%s: data_len == -EINVAL\n", __func__);
+		ret = -EINVAL;
+	} else if (!io_data->aio) {
+		bool interrupted = false;
+
+		req = ep->req;
+		if (io_data->use_sg) {
+			req->buf = NULL;
+			req->sg	= io_data->sgt.sgl;
+			req->num_sgs = io_data->sgt.nents;
+		} else {
+			req->buf = data;
+			req->num_sgs = 0;
+		}
+		req->length = data_len;
+
+		io_data->buf = data;
+
+		init_completion(&io_data->done);
+		req->context  = io_data;
+		req->complete = ffs_epfile_io_complete;
+
+		ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC);
+		if (ret < 0)
+			goto error_lock;
+
+		spin_unlock_irq(&epfile->ffs->eps_lock);
+
+		if (wait_for_completion_interruptible(&io_data->done)) {
+			spin_lock_irq(&epfile->ffs->eps_lock);
+			if (epfile->ep != ep) {
+				ret = -ESHUTDOWN;
+				goto error_lock;
+			}
+			/*
+			 * To avoid race condition with ffs_epfile_io_complete,
+			 * dequeue the request first then check
+			 * status. usb_ep_dequeue API should guarantee no race
+			 * condition with req->complete callback.
+			 */
+			usb_ep_dequeue(ep->ep, req);
+			spin_unlock_irq(&epfile->ffs->eps_lock);
+			wait_for_completion(&io_data->done);
+			interrupted = io_data->status < 0;
+		}
+
+		if (interrupted)
+			ret = -EINTR;
+		else if (io_data->read && io_data->status > 0)
+			ret = __ffs_epfile_read_data(epfile, data, io_data->status,
+						     &io_data->data);
+		else
+			ret = io_data->status;
+		goto error_mutex;
+	} else if (!(req = usb_ep_alloc_request(ep->ep, GFP_ATOMIC))) {
+		ret = -ENOMEM;
+	} else {
+		if (io_data->use_sg) {
+			req->buf = NULL;
+			req->sg	= io_data->sgt.sgl;
+			req->num_sgs = io_data->sgt.nents;
+		} else {
+			req->buf = data;
+			req->num_sgs = 0;
+		}
+		req->length = data_len;
+
+		io_data->buf = data;
+		io_data->ep = ep->ep;
+		io_data->req = req;
+		io_data->ffs = epfile->ffs;
+
+		req->context  = io_data;
+		req->complete = ffs_epfile_async_io_complete;
+
+		ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC);
+		if (ret) {
+			io_data->req = NULL;
+			usb_ep_free_request(ep->ep, req);
+			goto error_lock;
+		}
+
+		ret = -EIOCBQUEUED;
+		/*
+		 * Do not kfree the buffer in this function.  It will be freed
+		 * by ffs_user_copy_worker.
+		 */
+		data = NULL;
+	}
+
+error_lock:
+	spin_unlock_irq(&epfile->ffs->eps_lock);
+error_mutex:
+	mutex_unlock(&epfile->mutex);
+error:
+	if (ret != -EIOCBQUEUED) /* don't free if there is iocb queued */
+		ffs_free_buffer(io_data);
+	return ret;
+}
+
+static int
+ffs_epfile_open(struct inode *inode, struct file *file)
+{
+	struct ffs_epfile *epfile = inode->i_private;
+
+	ENTER();
+
+	if (WARN_ON(epfile->ffs->state != FFS_ACTIVE))
+		return -ENODEV;
+
+	file->private_data = epfile;
+	ffs_data_opened(epfile->ffs);
+
+	return stream_open(inode, file);
+}
+
+static int ffs_aio_cancel(struct kiocb *kiocb)
+{
+	struct ffs_io_data *io_data = kiocb->private;
+	struct ffs_epfile *epfile = kiocb->ki_filp->private_data;
+	unsigned long flags;
+	int value;
+
+	ENTER();
+
+	spin_lock_irqsave(&epfile->ffs->eps_lock, flags);
+
+	if (io_data && io_data->ep && io_data->req)
+		value = usb_ep_dequeue(io_data->ep, io_data->req);
+	else
+		value = -EINVAL;
+
+	spin_unlock_irqrestore(&epfile->ffs->eps_lock, flags);
+
+	return value;
+}
+
+static ssize_t ffs_epfile_write_iter(struct kiocb *kiocb, struct iov_iter *from)
+{
+	struct ffs_io_data io_data, *p = &io_data;
+	ssize_t res;
+
+	ENTER();
+
+	if (!is_sync_kiocb(kiocb)) {
+		p = kzalloc(sizeof(io_data), GFP_KERNEL);
+		if (!p)
+			return -ENOMEM;
+		p->aio = true;
+	} else {
+		memset(p, 0, sizeof(*p));
+		p->aio = false;
+	}
+
+	p->read = false;
+	p->kiocb = kiocb;
+	p->data = *from;
+	p->mm = current->mm;
+
+	kiocb->private = p;
+
+	if (p->aio)
+		kiocb_set_cancel_fn(kiocb, ffs_aio_cancel);
+
+	res = ffs_epfile_io(kiocb->ki_filp, p);
+	if (res == -EIOCBQUEUED)
+		return res;
+	if (p->aio)
+		kfree(p);
+	else
+		*from = p->data;
+	return res;
+}
+
+static ssize_t ffs_epfile_read_iter(struct kiocb *kiocb, struct iov_iter *to)
+{
+	struct ffs_io_data io_data, *p = &io_data;
+	ssize_t res;
+
+	ENTER();
+
+	if (!is_sync_kiocb(kiocb)) {
+		p = kzalloc(sizeof(io_data), GFP_KERNEL);
+		if (!p)
+			return -ENOMEM;
+		p->aio = true;
+	} else {
+		memset(p, 0, sizeof(*p));
+		p->aio = false;
+	}
+
+	p->read = true;
+	p->kiocb = kiocb;
+	if (p->aio) {
+		p->to_free = dup_iter(&p->data, to, GFP_KERNEL);
+		if (!p->to_free) {
+			kfree(p);
+			return -ENOMEM;
+		}
+	} else {
+		p->data = *to;
+		p->to_free = NULL;
+	}
+	p->mm = current->mm;
+
+	kiocb->private = p;
+
+	if (p->aio)
+		kiocb_set_cancel_fn(kiocb, ffs_aio_cancel);
+
+	res = ffs_epfile_io(kiocb->ki_filp, p);
+	if (res == -EIOCBQUEUED)
+		return res;
+
+	if (p->aio) {
+		kfree(p->to_free);
+		kfree(p);
+	} else {
+		*to = p->data;
+	}
+	return res;
+}
+
+static int
+ffs_epfile_release(struct inode *inode, struct file *file)
+{
+	struct ffs_epfile *epfile = inode->i_private;
+
+	ENTER();
+
+	__ffs_epfile_read_buffer_free(epfile);
+	ffs_data_closed(epfile->ffs);
+
+	return 0;
+}
+
+static long ffs_epfile_ioctl(struct file *file, unsigned code,
+			     unsigned long value)
+{
+	struct ffs_epfile *epfile = file->private_data;
+	struct ffs_ep *ep;
+	int ret;
+
+	ENTER();
+
+	if (WARN_ON(epfile->ffs->state != FFS_ACTIVE))
+		return -ENODEV;
+
+	/* Wait for endpoint to be enabled */
+	ep = epfile->ep;
+	if (!ep) {
+		if (file->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		ret = wait_event_interruptible(
+				epfile->ffs->wait, (ep = epfile->ep));
+		if (ret)
+			return -EINTR;
+	}
+
+	spin_lock_irq(&epfile->ffs->eps_lock);
+
+	/* In the meantime, endpoint got disabled or changed. */
+	if (epfile->ep != ep) {
+		spin_unlock_irq(&epfile->ffs->eps_lock);
+		return -ESHUTDOWN;
+	}
+
+	switch (code) {
+	case FUNCTIONFS_FIFO_STATUS:
+		ret = usb_ep_fifo_status(epfile->ep->ep);
+		break;
+	case FUNCTIONFS_FIFO_FLUSH:
+		usb_ep_fifo_flush(epfile->ep->ep);
+		ret = 0;
+		break;
+	case FUNCTIONFS_CLEAR_HALT:
+		ret = usb_ep_clear_halt(epfile->ep->ep);
+		break;
+	case FUNCTIONFS_ENDPOINT_REVMAP:
+		ret = epfile->ep->num;
+		break;
+	case FUNCTIONFS_ENDPOINT_DESC:
+	{
+		int desc_idx;
+		struct usb_endpoint_descriptor desc1, *desc;
+
+		switch (epfile->ffs->gadget->speed) {
+		case USB_SPEED_SUPER:
+		case USB_SPEED_SUPER_PLUS:
+			desc_idx = 2;
+			break;
+		case USB_SPEED_HIGH:
+			desc_idx = 1;
+			break;
+		default:
+			desc_idx = 0;
+		}
+
+		desc = epfile->ep->descs[desc_idx];
+		memcpy(&desc1, desc, desc->bLength);
+
+		spin_unlock_irq(&epfile->ffs->eps_lock);
+		ret = copy_to_user((void __user *)value, &desc1, desc1.bLength);
+		if (ret)
+			ret = -EFAULT;
+		return ret;
+	}
+	default:
+		ret = -ENOTTY;
+	}
+	spin_unlock_irq(&epfile->ffs->eps_lock);
+
+	return ret;
+}
+
+static const struct file_operations ffs_epfile_operations = {
+	.llseek =	no_llseek,
+
+	.open =		ffs_epfile_open,
+	.write_iter =	ffs_epfile_write_iter,
+	.read_iter =	ffs_epfile_read_iter,
+	.release =	ffs_epfile_release,
+	.unlocked_ioctl =	ffs_epfile_ioctl,
+	.compat_ioctl = compat_ptr_ioctl,
+};
+
+
+/* File system and super block operations ***********************************/
+
+/*
+ * Mounting the file system creates a controller file, used first for
+ * function configuration then later for event monitoring.
+ */
+
+static struct inode *__must_check
+ffs_sb_make_inode(struct super_block *sb, void *data,
+		  const struct file_operations *fops,
+		  const struct inode_operations *iops,
+		  struct ffs_file_perms *perms)
+{
+	struct inode *inode;
+
+	ENTER();
+
+	inode = new_inode(sb);
+
+	if (inode) {
+		struct timespec64 ts = current_time(inode);
+
+		inode->i_ino	 = get_next_ino();
+		inode->i_mode    = perms->mode;
+		inode->i_uid     = perms->uid;
+		inode->i_gid     = perms->gid;
+		inode->i_atime   = ts;
+		inode->i_mtime   = ts;
+		inode->i_ctime   = ts;
+		inode->i_private = data;
+		if (fops)
+			inode->i_fop = fops;
+		if (iops)
+			inode->i_op  = iops;
+	}
+
+	return inode;
+}
+
+/* Create "regular" file */
+static struct dentry *ffs_sb_create_file(struct super_block *sb,
+					const char *name, void *data,
+					const struct file_operations *fops)
+{
+	struct ffs_data	*ffs = sb->s_fs_info;
+	struct dentry	*dentry;
+	struct inode	*inode;
+
+	ENTER();
+
+	dentry = d_alloc_name(sb->s_root, name);
+	if (!dentry)
+		return NULL;
+
+	inode = ffs_sb_make_inode(sb, data, fops, NULL, &ffs->file_perms);
+	if (!inode) {
+		dput(dentry);
+		return NULL;
+	}
+
+	d_add(dentry, inode);
+	return dentry;
+}
+
+/* Super block */
+static const struct super_operations ffs_sb_operations = {
+	.statfs =	simple_statfs,
+	.drop_inode =	generic_delete_inode,
+};
+
+struct ffs_sb_fill_data {
+	struct ffs_file_perms perms;
+	umode_t root_mode;
+	const char *dev_name;
+	bool no_disconnect;
+	struct ffs_data *ffs_data;
+};
+
+static int ffs_sb_fill(struct super_block *sb, struct fs_context *fc)
+{
+	struct ffs_sb_fill_data *data = fc->fs_private;
+	struct inode	*inode;
+	struct ffs_data	*ffs = data->ffs_data;
+
+	ENTER();
+
+	ffs->sb              = sb;
+	data->ffs_data       = NULL;
+	sb->s_fs_info        = ffs;
+	sb->s_blocksize      = PAGE_SIZE;
+	sb->s_blocksize_bits = PAGE_SHIFT;
+	sb->s_magic          = FUNCTIONFS_MAGIC;
+	sb->s_op             = &ffs_sb_operations;
+	sb->s_time_gran      = 1;
+
+	/* Root inode */
+	data->perms.mode = data->root_mode;
+	inode = ffs_sb_make_inode(sb, NULL,
+				  &simple_dir_operations,
+				  &simple_dir_inode_operations,
+				  &data->perms);
+	sb->s_root = d_make_root(inode);
+	if (!sb->s_root)
+		return -ENOMEM;
+
+	/* EP0 file */
+	if (!ffs_sb_create_file(sb, "ep0", ffs, &ffs_ep0_operations))
+		return -ENOMEM;
+
+	return 0;
+}
+
+enum {
+	Opt_no_disconnect,
+	Opt_rmode,
+	Opt_fmode,
+	Opt_mode,
+	Opt_uid,
+	Opt_gid,
+};
+
+static const struct fs_parameter_spec ffs_fs_fs_parameters[] = {
+	fsparam_bool	("no_disconnect",	Opt_no_disconnect),
+	fsparam_u32	("rmode",		Opt_rmode),
+	fsparam_u32	("fmode",		Opt_fmode),
+	fsparam_u32	("mode",		Opt_mode),
+	fsparam_u32	("uid",			Opt_uid),
+	fsparam_u32	("gid",			Opt_gid),
+	{}
+};
+
+static int ffs_fs_parse_param(struct fs_context *fc, struct fs_parameter *param)
+{
+	struct ffs_sb_fill_data *data = fc->fs_private;
+	struct fs_parse_result result;
+	int opt;
+
+	ENTER();
+
+	opt = fs_parse(fc, ffs_fs_fs_parameters, param, &result);
+	if (opt < 0)
+		return opt;
+
+	switch (opt) {
+	case Opt_no_disconnect:
+		data->no_disconnect = result.boolean;
+		break;
+	case Opt_rmode:
+		data->root_mode  = (result.uint_32 & 0555) | S_IFDIR;
+		break;
+	case Opt_fmode:
+		data->perms.mode = (result.uint_32 & 0666) | S_IFREG;
+		break;
+	case Opt_mode:
+		data->root_mode  = (result.uint_32 & 0555) | S_IFDIR;
+		data->perms.mode = (result.uint_32 & 0666) | S_IFREG;
+		break;
+
+	case Opt_uid:
+		data->perms.uid = make_kuid(current_user_ns(), result.uint_32);
+		if (!uid_valid(data->perms.uid))
+			goto unmapped_value;
+		break;
+	case Opt_gid:
+		data->perms.gid = make_kgid(current_user_ns(), result.uint_32);
+		if (!gid_valid(data->perms.gid))
+			goto unmapped_value;
+		break;
+
+	default:
+		return -ENOPARAM;
+	}
+
+	return 0;
+
+unmapped_value:
+	return invalf(fc, "%s: unmapped value: %u", param->key, result.uint_32);
+}
+
+/*
+ * Set up the superblock for a mount.
+ */
+static int ffs_fs_get_tree(struct fs_context *fc)
+{
+	struct ffs_sb_fill_data *ctx = fc->fs_private;
+	struct ffs_data	*ffs;
+	int ret;
+
+	ENTER();
+
+	if (!fc->source)
+		return invalf(fc, "No source specified");
+
+	ffs = ffs_data_new(fc->source);
+	if (!ffs)
+		return -ENOMEM;
+	ffs->file_perms = ctx->perms;
+	ffs->no_disconnect = ctx->no_disconnect;
+
+	ffs->dev_name = kstrdup(fc->source, GFP_KERNEL);
+	if (!ffs->dev_name) {
+		ffs_data_put(ffs);
+		return -ENOMEM;
+	}
+
+	ret = ffs_acquire_dev(ffs->dev_name, ffs);
+	if (ret) {
+		ffs_data_put(ffs);
+		return ret;
+	}
+
+	ctx->ffs_data = ffs;
+	return get_tree_nodev(fc, ffs_sb_fill);
+}
+
+static void ffs_fs_free_fc(struct fs_context *fc)
+{
+	struct ffs_sb_fill_data *ctx = fc->fs_private;
+
+	if (ctx) {
+		if (ctx->ffs_data) {
+			ffs_data_put(ctx->ffs_data);
+		}
+
+		kfree(ctx);
+	}
+}
+
+static const struct fs_context_operations ffs_fs_context_ops = {
+	.free		= ffs_fs_free_fc,
+	.parse_param	= ffs_fs_parse_param,
+	.get_tree	= ffs_fs_get_tree,
+};
+
+static int ffs_fs_init_fs_context(struct fs_context *fc)
+{
+	struct ffs_sb_fill_data *ctx;
+
+	ctx = kzalloc(sizeof(struct ffs_sb_fill_data), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->perms.mode = S_IFREG | 0600;
+	ctx->perms.uid = GLOBAL_ROOT_UID;
+	ctx->perms.gid = GLOBAL_ROOT_GID;
+	ctx->root_mode = S_IFDIR | 0500;
+	ctx->no_disconnect = false;
+
+	fc->fs_private = ctx;
+	fc->ops = &ffs_fs_context_ops;
+	return 0;
+}
+
+static void
+ffs_fs_kill_sb(struct super_block *sb)
+{
+	ENTER();
+
+	kill_litter_super(sb);
+	if (sb->s_fs_info)
+		ffs_data_closed(sb->s_fs_info);
+}
+
+static struct file_system_type ffs_fs_type = {
+	.owner		= THIS_MODULE,
+	.name		= "functionfs",
+	.init_fs_context = ffs_fs_init_fs_context,
+	.parameters	= ffs_fs_fs_parameters,
+	.kill_sb	= ffs_fs_kill_sb,
+};
+MODULE_ALIAS_FS("functionfs");
+
+
+/* Driver's main init/cleanup functions *************************************/
+
+static int functionfs_init(void)
+{
+	int ret;
+
+	ENTER();
+
+	ret = register_filesystem(&ffs_fs_type);
+	if (!ret)
+		pr_info("file system registered\n");
+	else
+		pr_err("failed registering file system (%d)\n", ret);
+
+	return ret;
+}
+
+static void functionfs_cleanup(void)
+{
+	ENTER();
+
+	pr_info("unloading\n");
+	unregister_filesystem(&ffs_fs_type);
+}
+
+
+/* ffs_data and ffs_function construction and destruction code **************/
+
+static void ffs_data_clear(struct ffs_data *ffs);
+static void ffs_data_reset(struct ffs_data *ffs);
+
+static void ffs_data_get(struct ffs_data *ffs)
+{
+	ENTER();
+
+	refcount_inc(&ffs->ref);
+}
+
+static void ffs_data_opened(struct ffs_data *ffs)
+{
+	ENTER();
+
+	refcount_inc(&ffs->ref);
+	if (atomic_add_return(1, &ffs->opened) == 1 &&
+			ffs->state == FFS_DEACTIVATED) {
+		ffs->state = FFS_CLOSING;
+		ffs_data_reset(ffs);
+	}
+}
+
+static void ffs_data_put(struct ffs_data *ffs)
+{
+	ENTER();
+
+	if (refcount_dec_and_test(&ffs->ref)) {
+		pr_info("%s(): freeing\n", __func__);
+		ffs_data_clear(ffs);
+		ffs_release_dev(ffs->private_data);
+		BUG_ON(waitqueue_active(&ffs->ev.waitq) ||
+		       swait_active(&ffs->ep0req_completion.wait) ||
+		       waitqueue_active(&ffs->wait));
+		destroy_workqueue(ffs->io_completion_wq);
+		kfree(ffs->dev_name);
+		kfree(ffs);
+	}
+}
+
+static void ffs_data_closed(struct ffs_data *ffs)
+{
+	struct ffs_epfile *epfiles;
+	unsigned long flags;
+
+	ENTER();
+
+	if (atomic_dec_and_test(&ffs->opened)) {
+		if (ffs->no_disconnect) {
+			ffs->state = FFS_DEACTIVATED;
+			spin_lock_irqsave(&ffs->eps_lock, flags);
+			epfiles = ffs->epfiles;
+			ffs->epfiles = NULL;
+			spin_unlock_irqrestore(&ffs->eps_lock,
+							flags);
+
+			if (epfiles)
+				ffs_epfiles_destroy(epfiles,
+						 ffs->eps_count);
+
+			if (ffs->setup_state == FFS_SETUP_PENDING)
+				__ffs_ep0_stall(ffs);
+		} else {
+			ffs->state = FFS_CLOSING;
+			ffs_data_reset(ffs);
+		}
+	}
+	if (atomic_read(&ffs->opened) < 0) {
+		ffs->state = FFS_CLOSING;
+		ffs_data_reset(ffs);
+	}
+
+	ffs_data_put(ffs);
+}
+
+static struct ffs_data *ffs_data_new(const char *dev_name)
+{
+	struct ffs_data *ffs = kzalloc(sizeof *ffs, GFP_KERNEL);
+	if (!ffs)
+		return NULL;
+
+	ENTER();
+
+	ffs->io_completion_wq = alloc_ordered_workqueue("%s", 0, dev_name);
+	if (!ffs->io_completion_wq) {
+		kfree(ffs);
+		return NULL;
+	}
+
+	refcount_set(&ffs->ref, 1);
+	atomic_set(&ffs->opened, 0);
+	ffs->state = FFS_READ_DESCRIPTORS;
+	mutex_init(&ffs->mutex);
+	spin_lock_init(&ffs->eps_lock);
+	init_waitqueue_head(&ffs->ev.waitq);
+	init_waitqueue_head(&ffs->wait);
+	init_completion(&ffs->ep0req_completion);
+
+	/* XXX REVISIT need to update it in some places, or do we? */
+	ffs->ev.can_stall = 1;
+
+	return ffs;
+}
+
+static void ffs_data_clear(struct ffs_data *ffs)
+{
+	struct ffs_epfile *epfiles;
+	unsigned long flags;
+
+	ENTER();
+
+	ffs_closed(ffs);
+
+	BUG_ON(ffs->gadget);
+
+	spin_lock_irqsave(&ffs->eps_lock, flags);
+	epfiles = ffs->epfiles;
+	ffs->epfiles = NULL;
+	spin_unlock_irqrestore(&ffs->eps_lock, flags);
+
+	/*
+	 * potential race possible between ffs_func_eps_disable
+	 * & ffs_epfile_release therefore maintaining a local
+	 * copy of epfile will save us from use-after-free.
+	 */
+	if (epfiles) {
+		ffs_epfiles_destroy(epfiles, ffs->eps_count);
+		ffs->epfiles = NULL;
+	}
+
+	if (ffs->ffs_eventfd) {
+		eventfd_ctx_put(ffs->ffs_eventfd);
+		ffs->ffs_eventfd = NULL;
+	}
+
+	kfree(ffs->raw_descs_data);
+	kfree(ffs->raw_strings);
+	kfree(ffs->stringtabs);
+}
+
+static void ffs_data_reset(struct ffs_data *ffs)
+{
+	ENTER();
+
+	ffs_data_clear(ffs);
+
+	ffs->raw_descs_data = NULL;
+	ffs->raw_descs = NULL;
+	ffs->raw_strings = NULL;
+	ffs->stringtabs = NULL;
+
+	ffs->raw_descs_length = 0;
+	ffs->fs_descs_count = 0;
+	ffs->hs_descs_count = 0;
+	ffs->ss_descs_count = 0;
+
+	ffs->strings_count = 0;
+	ffs->interfaces_count = 0;
+	ffs->eps_count = 0;
+
+	ffs->ev.count = 0;
+
+	ffs->state = FFS_READ_DESCRIPTORS;
+	ffs->setup_state = FFS_NO_SETUP;
+	ffs->flags = 0;
+
+	ffs->ms_os_descs_ext_prop_count = 0;
+	ffs->ms_os_descs_ext_prop_name_len = 0;
+	ffs->ms_os_descs_ext_prop_data_len = 0;
+}
+
+
+static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
+{
+	struct usb_gadget_strings **lang;
+	int first_id;
+
+	ENTER();
+
+	if (WARN_ON(ffs->state != FFS_ACTIVE
+		 || test_and_set_bit(FFS_FL_BOUND, &ffs->flags)))
+		return -EBADFD;
+
+	first_id = usb_string_ids_n(cdev, ffs->strings_count);
+	if (first_id < 0)
+		return first_id;
+
+	ffs->ep0req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL);
+	if (!ffs->ep0req)
+		return -ENOMEM;
+	ffs->ep0req->complete = ffs_ep0_complete;
+	ffs->ep0req->context = ffs;
+
+	lang = ffs->stringtabs;
+	if (lang) {
+		for (; *lang; ++lang) {
+			struct usb_string *str = (*lang)->strings;
+			int id = first_id;
+			for (; str->s; ++id, ++str)
+				str->id = id;
+		}
+	}
+
+	ffs->gadget = cdev->gadget;
+	ffs_data_get(ffs);
+	return 0;
+}
+
+static void functionfs_unbind(struct ffs_data *ffs)
+{
+	ENTER();
+
+	if (!WARN_ON(!ffs->gadget)) {
+		/* dequeue before freeing ep0req */
+		usb_ep_dequeue(ffs->gadget->ep0, ffs->ep0req);
+		mutex_lock(&ffs->mutex);
+		usb_ep_free_request(ffs->gadget->ep0, ffs->ep0req);
+		ffs->ep0req = NULL;
+		ffs->gadget = NULL;
+		clear_bit(FFS_FL_BOUND, &ffs->flags);
+		mutex_unlock(&ffs->mutex);
+		ffs_data_put(ffs);
+	}
+}
+
+static int ffs_epfiles_create(struct ffs_data *ffs)
+{
+	struct ffs_epfile *epfile, *epfiles;
+	unsigned i, count;
+
+	ENTER();
+
+	count = ffs->eps_count;
+	epfiles = kcalloc(count, sizeof(*epfiles), GFP_KERNEL);
+	if (!epfiles)
+		return -ENOMEM;
+
+	epfile = epfiles;
+	for (i = 1; i <= count; ++i, ++epfile) {
+		epfile->ffs = ffs;
+		mutex_init(&epfile->mutex);
+		if (ffs->user_flags & FUNCTIONFS_VIRTUAL_ADDR)
+			sprintf(epfile->name, "ep%02x", ffs->eps_addrmap[i]);
+		else
+			sprintf(epfile->name, "ep%u", i);
+		epfile->dentry = ffs_sb_create_file(ffs->sb, epfile->name,
+						 epfile,
+						 &ffs_epfile_operations);
+		if (!epfile->dentry) {
+			ffs_epfiles_destroy(epfiles, i - 1);
+			return -ENOMEM;
+		}
+	}
+
+	ffs->epfiles = epfiles;
+	return 0;
+}
+
+static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count)
+{
+	struct ffs_epfile *epfile = epfiles;
+
+	ENTER();
+
+	for (; count; --count, ++epfile) {
+		BUG_ON(mutex_is_locked(&epfile->mutex));
+		if (epfile->dentry) {
+			d_delete(epfile->dentry);
+			dput(epfile->dentry);
+			epfile->dentry = NULL;
+		}
+	}
+
+	kfree(epfiles);
+}
+
+static void ffs_func_eps_disable(struct ffs_function *func)
+{
+	struct ffs_ep *ep;
+	struct ffs_epfile *epfile;
+	unsigned short count;
+	unsigned long flags;
+
+	spin_lock_irqsave(&func->ffs->eps_lock, flags);
+	count = func->ffs->eps_count;
+	epfile = func->ffs->epfiles;
+	ep = func->eps;
+	while (count--) {
+		/* pending requests get nuked */
+		if (ep->ep)
+			usb_ep_disable(ep->ep);
+		++ep;
+
+		if (epfile) {
+			epfile->ep = NULL;
+			__ffs_epfile_read_buffer_free(epfile);
+			++epfile;
+		}
+	}
+	spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
+}
+
+static int ffs_func_eps_enable(struct ffs_function *func)
+{
+	struct ffs_data *ffs;
+	struct ffs_ep *ep;
+	struct ffs_epfile *epfile;
+	unsigned short count;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&func->ffs->eps_lock, flags);
+	ffs = func->ffs;
+	ep = func->eps;
+	epfile = ffs->epfiles;
+	count = ffs->eps_count;
+	while(count--) {
+		ep->ep->driver_data = ep;
+
+		ret = config_ep_by_speed(func->gadget, &func->function, ep->ep);
+		if (ret) {
+			pr_err("%s: config_ep_by_speed(%s) returned %d\n",
+					__func__, ep->ep->name, ret);
+			break;
+		}
+
+		ret = usb_ep_enable(ep->ep);
+		if (!ret) {
+			epfile->ep = ep;
+			epfile->in = usb_endpoint_dir_in(ep->ep->desc);
+			epfile->isoc = usb_endpoint_xfer_isoc(ep->ep->desc);
+		} else {
+			break;
+		}
+
+		++ep;
+		++epfile;
+	}
+
+	wake_up_interruptible(&ffs->wait);
+	spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
+
+	return ret;
+}
+
+
+/* Parsing and building descriptors and strings *****************************/
+
+/*
+ * This validates if data pointed by data is a valid USB descriptor as
+ * well as record how many interfaces, endpoints and strings are
+ * required by given configuration.  Returns address after the
+ * descriptor or NULL if data is invalid.
+ */
+
+enum ffs_entity_type {
+	FFS_DESCRIPTOR, FFS_INTERFACE, FFS_STRING, FFS_ENDPOINT
+};
+
+enum ffs_os_desc_type {
+	FFS_OS_DESC, FFS_OS_DESC_EXT_COMPAT, FFS_OS_DESC_EXT_PROP
+};
+
+typedef int (*ffs_entity_callback)(enum ffs_entity_type entity,
+				   u8 *valuep,
+				   struct usb_descriptor_header *desc,
+				   void *priv);
+
+typedef int (*ffs_os_desc_callback)(enum ffs_os_desc_type entity,
+				    struct usb_os_desc_header *h, void *data,
+				    unsigned len, void *priv);
+
+static int __must_check ffs_do_single_desc(char *data, unsigned len,
+					   ffs_entity_callback entity,
+					   void *priv, int *current_class)
+{
+	struct usb_descriptor_header *_ds = (void *)data;
+	u8 length;
+	int ret;
+
+	ENTER();
+
+	/* At least two bytes are required: length and type */
+	if (len < 2) {
+		pr_vdebug("descriptor too short\n");
+		return -EINVAL;
+	}
+
+	/* If we have at least as many bytes as the descriptor takes? */
+	length = _ds->bLength;
+	if (len < length) {
+		pr_vdebug("descriptor longer then available data\n");
+		return -EINVAL;
+	}
+
+#define __entity_check_INTERFACE(val)  1
+#define __entity_check_STRING(val)     (val)
+#define __entity_check_ENDPOINT(val)   ((val) & USB_ENDPOINT_NUMBER_MASK)
+#define __entity(type, val) do {					\
+		pr_vdebug("entity " #type "(%02x)\n", (val));		\
+		if (!__entity_check_ ##type(val)) {			\
+			pr_vdebug("invalid entity's value\n");		\
+			return -EINVAL;					\
+		}							\
+		ret = entity(FFS_ ##type, &val, _ds, priv);		\
+		if (ret < 0) {						\
+			pr_debug("entity " #type "(%02x); ret = %d\n",	\
+				 (val), ret);				\
+			return ret;					\
+		}							\
+	} while (0)
+
+	/* Parse descriptor depending on type. */
+	switch (_ds->bDescriptorType) {
+	case USB_DT_DEVICE:
+	case USB_DT_CONFIG:
+	case USB_DT_STRING:
+	case USB_DT_DEVICE_QUALIFIER:
+		/* function can't have any of those */
+		pr_vdebug("descriptor reserved for gadget: %d\n",
+		      _ds->bDescriptorType);
+		return -EINVAL;
+
+	case USB_DT_INTERFACE: {
+		struct usb_interface_descriptor *ds = (void *)_ds;
+		pr_vdebug("interface descriptor\n");
+		if (length != sizeof *ds)
+			goto inv_length;
+
+		__entity(INTERFACE, ds->bInterfaceNumber);
+		if (ds->iInterface)
+			__entity(STRING, ds->iInterface);
+		*current_class = ds->bInterfaceClass;
+	}
+		break;
+
+	case USB_DT_ENDPOINT: {
+		struct usb_endpoint_descriptor *ds = (void *)_ds;
+		pr_vdebug("endpoint descriptor\n");
+		if (length != USB_DT_ENDPOINT_SIZE &&
+		    length != USB_DT_ENDPOINT_AUDIO_SIZE)
+			goto inv_length;
+		__entity(ENDPOINT, ds->bEndpointAddress);
+	}
+		break;
+
+	case USB_TYPE_CLASS | 0x01:
+		if (*current_class == USB_INTERFACE_CLASS_HID) {
+			pr_vdebug("hid descriptor\n");
+			if (length != sizeof(struct hid_descriptor))
+				goto inv_length;
+			break;
+		} else if (*current_class == USB_INTERFACE_CLASS_CCID) {
+			pr_vdebug("ccid descriptor\n");
+			if (length != sizeof(struct ccid_descriptor))
+				goto inv_length;
+			break;
+		} else {
+			pr_vdebug("unknown descriptor: %d for class %d\n",
+			      _ds->bDescriptorType, *current_class);
+			return -EINVAL;
+		}
+
+	case USB_DT_OTG:
+		if (length != sizeof(struct usb_otg_descriptor))
+			goto inv_length;
+		break;
+
+	case USB_DT_INTERFACE_ASSOCIATION: {
+		struct usb_interface_assoc_descriptor *ds = (void *)_ds;
+		pr_vdebug("interface association descriptor\n");
+		if (length != sizeof *ds)
+			goto inv_length;
+		if (ds->iFunction)
+			__entity(STRING, ds->iFunction);
+	}
+		break;
+
+	case USB_DT_SS_ENDPOINT_COMP:
+		pr_vdebug("EP SS companion descriptor\n");
+		if (length != sizeof(struct usb_ss_ep_comp_descriptor))
+			goto inv_length;
+		break;
+
+	case USB_DT_OTHER_SPEED_CONFIG:
+	case USB_DT_INTERFACE_POWER:
+	case USB_DT_DEBUG:
+	case USB_DT_SECURITY:
+	case USB_DT_CS_RADIO_CONTROL:
+		/* TODO */
+		pr_vdebug("unimplemented descriptor: %d\n", _ds->bDescriptorType);
+		return -EINVAL;
+
+	default:
+		/* We should never be here */
+		pr_vdebug("unknown descriptor: %d\n", _ds->bDescriptorType);
+		return -EINVAL;
+
+inv_length:
+		pr_vdebug("invalid length: %d (descriptor %d)\n",
+			  _ds->bLength, _ds->bDescriptorType);
+		return -EINVAL;
+	}
+
+#undef __entity
+#undef __entity_check_DESCRIPTOR
+#undef __entity_check_INTERFACE
+#undef __entity_check_STRING
+#undef __entity_check_ENDPOINT
+
+	return length;
+}
+
+static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len,
+				     ffs_entity_callback entity, void *priv)
+{
+	const unsigned _len = len;
+	unsigned long num = 0;
+	int current_class = -1;
+
+	ENTER();
+
+	for (;;) {
+		int ret;
+
+		if (num == count)
+			data = NULL;
+
+		/* Record "descriptor" entity */
+		ret = entity(FFS_DESCRIPTOR, (u8 *)num, (void *)data, priv);
+		if (ret < 0) {
+			pr_debug("entity DESCRIPTOR(%02lx); ret = %d\n",
+				 num, ret);
+			return ret;
+		}
+
+		if (!data)
+			return _len - len;
+
+		ret = ffs_do_single_desc(data, len, entity, priv,
+			&current_class);
+		if (ret < 0) {
+			pr_debug("%s returns %d\n", __func__, ret);
+			return ret;
+		}
+
+		len -= ret;
+		data += ret;
+		++num;
+	}
+}
+
+static int __ffs_data_do_entity(enum ffs_entity_type type,
+				u8 *valuep, struct usb_descriptor_header *desc,
+				void *priv)
+{
+	struct ffs_desc_helper *helper = priv;
+	struct usb_endpoint_descriptor *d;
+
+	ENTER();
+
+	switch (type) {
+	case FFS_DESCRIPTOR:
+		break;
+
+	case FFS_INTERFACE:
+		/*
+		 * Interfaces are indexed from zero so if we
+		 * encountered interface "n" then there are at least
+		 * "n+1" interfaces.
+		 */
+		if (*valuep >= helper->interfaces_count)
+			helper->interfaces_count = *valuep + 1;
+		break;
+
+	case FFS_STRING:
+		/*
+		 * Strings are indexed from 1 (0 is reserved
+		 * for languages list)
+		 */
+		if (*valuep > helper->ffs->strings_count)
+			helper->ffs->strings_count = *valuep;
+		break;
+
+	case FFS_ENDPOINT:
+		d = (void *)desc;
+		helper->eps_count++;
+		if (helper->eps_count >= FFS_MAX_EPS_COUNT)
+			return -EINVAL;
+		/* Check if descriptors for any speed were already parsed */
+		if (!helper->ffs->eps_count && !helper->ffs->interfaces_count)
+			helper->ffs->eps_addrmap[helper->eps_count] =
+				d->bEndpointAddress;
+		else if (helper->ffs->eps_addrmap[helper->eps_count] !=
+				d->bEndpointAddress)
+			return -EINVAL;
+		break;
+	}
+
+	return 0;
+}
+
+static int __ffs_do_os_desc_header(enum ffs_os_desc_type *next_type,
+				   struct usb_os_desc_header *desc)
+{
+	u16 bcd_version = le16_to_cpu(desc->bcdVersion);
+	u16 w_index = le16_to_cpu(desc->wIndex);
+
+	if (bcd_version != 1) {
+		pr_vdebug("unsupported os descriptors version: %d",
+			  bcd_version);
+		return -EINVAL;
+	}
+	switch (w_index) {
+	case 0x4:
+		*next_type = FFS_OS_DESC_EXT_COMPAT;
+		break;
+	case 0x5:
+		*next_type = FFS_OS_DESC_EXT_PROP;
+		break;
+	default:
+		pr_vdebug("unsupported os descriptor type: %d", w_index);
+		return -EINVAL;
+	}
+
+	return sizeof(*desc);
+}
+
+/*
+ * Process all extended compatibility/extended property descriptors
+ * of a feature descriptor
+ */
+static int __must_check ffs_do_single_os_desc(char *data, unsigned len,
+					      enum ffs_os_desc_type type,
+					      u16 feature_count,
+					      ffs_os_desc_callback entity,
+					      void *priv,
+					      struct usb_os_desc_header *h)
+{
+	int ret;
+	const unsigned _len = len;
+
+	ENTER();
+
+	/* loop over all ext compat/ext prop descriptors */
+	while (feature_count--) {
+		ret = entity(type, h, data, len, priv);
+		if (ret < 0) {
+			pr_debug("bad OS descriptor, type: %d\n", type);
+			return ret;
+		}
+		data += ret;
+		len -= ret;
+	}
+	return _len - len;
+}
+
+/* Process a number of complete Feature Descriptors (Ext Compat or Ext Prop) */
+static int __must_check ffs_do_os_descs(unsigned count,
+					char *data, unsigned len,
+					ffs_os_desc_callback entity, void *priv)
+{
+	const unsigned _len = len;
+	unsigned long num = 0;
+
+	ENTER();
+
+	for (num = 0; num < count; ++num) {
+		int ret;
+		enum ffs_os_desc_type type;
+		u16 feature_count;
+		struct usb_os_desc_header *desc = (void *)data;
+
+		if (len < sizeof(*desc))
+			return -EINVAL;
+
+		/*
+		 * Record "descriptor" entity.
+		 * Process dwLength, bcdVersion, wIndex, get b/wCount.
+		 * Move the data pointer to the beginning of extended
+		 * compatibilities proper or extended properties proper
+		 * portions of the data
+		 */
+		if (le32_to_cpu(desc->dwLength) > len)
+			return -EINVAL;
+
+		ret = __ffs_do_os_desc_header(&type, desc);
+		if (ret < 0) {
+			pr_debug("entity OS_DESCRIPTOR(%02lx); ret = %d\n",
+				 num, ret);
+			return ret;
+		}
+		/*
+		 * 16-bit hex "?? 00" Little Endian looks like 8-bit hex "??"
+		 */
+		feature_count = le16_to_cpu(desc->wCount);
+		if (type == FFS_OS_DESC_EXT_COMPAT &&
+		    (feature_count > 255 || desc->Reserved))
+				return -EINVAL;
+		len -= ret;
+		data += ret;
+
+		/*
+		 * Process all function/property descriptors
+		 * of this Feature Descriptor
+		 */
+		ret = ffs_do_single_os_desc(data, len, type,
+					    feature_count, entity, priv, desc);
+		if (ret < 0) {
+			pr_debug("%s returns %d\n", __func__, ret);
+			return ret;
+		}
+
+		len -= ret;
+		data += ret;
+	}
+	return _len - len;
+}
+
+/*
+ * Validate contents of the buffer from userspace related to OS descriptors.
+ */
+static int __ffs_data_do_os_desc(enum ffs_os_desc_type type,
+				 struct usb_os_desc_header *h, void *data,
+				 unsigned len, void *priv)
+{
+	struct ffs_data *ffs = priv;
+	u8 length;
+
+	ENTER();
+
+	switch (type) {
+	case FFS_OS_DESC_EXT_COMPAT: {
+		struct usb_ext_compat_desc *d = data;
+		int i;
+
+		if (len < sizeof(*d) ||
+		    d->bFirstInterfaceNumber >= ffs->interfaces_count)
+			return -EINVAL;
+		if (d->Reserved1 != 1) {
+			/*
+			 * According to the spec, Reserved1 must be set to 1
+			 * but older kernels incorrectly rejected non-zero
+			 * values.  We fix it here to avoid returning EINVAL
+			 * in response to values we used to accept.
+			 */
+			pr_debug("usb_ext_compat_desc::Reserved1 forced to 1\n");
+			d->Reserved1 = 1;
+		}
+		for (i = 0; i < ARRAY_SIZE(d->Reserved2); ++i)
+			if (d->Reserved2[i])
+				return -EINVAL;
+
+		length = sizeof(struct usb_ext_compat_desc);
+	}
+		break;
+	case FFS_OS_DESC_EXT_PROP: {
+		struct usb_ext_prop_desc *d = data;
+		u32 type, pdl;
+		u16 pnl;
+
+		if (len < sizeof(*d) || h->interface >= ffs->interfaces_count)
+			return -EINVAL;
+		length = le32_to_cpu(d->dwSize);
+		if (len < length)
+			return -EINVAL;
+		type = le32_to_cpu(d->dwPropertyDataType);
+		if (type < USB_EXT_PROP_UNICODE ||
+		    type > USB_EXT_PROP_UNICODE_MULTI) {
+			pr_vdebug("unsupported os descriptor property type: %d",
+				  type);
+			return -EINVAL;
+		}
+		pnl = le16_to_cpu(d->wPropertyNameLength);
+		if (length < 14 + pnl) {
+			pr_vdebug("invalid os descriptor length: %d pnl:%d (descriptor %d)\n",
+				  length, pnl, type);
+			return -EINVAL;
+		}
+		pdl = le32_to_cpu(*(__le32 *)((u8 *)data + 10 + pnl));
+		if (length != 14 + pnl + pdl) {
+			pr_vdebug("invalid os descriptor length: %d pnl:%d pdl:%d (descriptor %d)\n",
+				  length, pnl, pdl, type);
+			return -EINVAL;
+		}
+		++ffs->ms_os_descs_ext_prop_count;
+		/* property name reported to the host as "WCHAR"s */
+		ffs->ms_os_descs_ext_prop_name_len += pnl * 2;
+		ffs->ms_os_descs_ext_prop_data_len += pdl;
+	}
+		break;
+	default:
+		pr_vdebug("unknown descriptor: %d\n", type);
+		return -EINVAL;
+	}
+	return length;
+}
+
+static int __ffs_data_got_descs(struct ffs_data *ffs,
+				char *const _data, size_t len)
+{
+	char *data = _data, *raw_descs;
+	unsigned os_descs_count = 0, counts[3], flags;
+	int ret = -EINVAL, i;
+	struct ffs_desc_helper helper;
+
+	ENTER();
+
+	if (get_unaligned_le32(data + 4) != len)
+		goto error;
+
+	switch (get_unaligned_le32(data)) {
+	case FUNCTIONFS_DESCRIPTORS_MAGIC:
+		flags = FUNCTIONFS_HAS_FS_DESC | FUNCTIONFS_HAS_HS_DESC;
+		data += 8;
+		len  -= 8;
+		break;
+	case FUNCTIONFS_DESCRIPTORS_MAGIC_V2:
+		flags = get_unaligned_le32(data + 8);
+		ffs->user_flags = flags;
+		if (flags & ~(FUNCTIONFS_HAS_FS_DESC |
+			      FUNCTIONFS_HAS_HS_DESC |
+			      FUNCTIONFS_HAS_SS_DESC |
+			      FUNCTIONFS_HAS_MS_OS_DESC |
+			      FUNCTIONFS_VIRTUAL_ADDR |
+			      FUNCTIONFS_EVENTFD |
+			      FUNCTIONFS_ALL_CTRL_RECIP |
+			      FUNCTIONFS_CONFIG0_SETUP)) {
+			ret = -ENOSYS;
+			goto error;
+		}
+		data += 12;
+		len  -= 12;
+		break;
+	default:
+		goto error;
+	}
+
+	if (flags & FUNCTIONFS_EVENTFD) {
+		if (len < 4)
+			goto error;
+		ffs->ffs_eventfd =
+			eventfd_ctx_fdget((int)get_unaligned_le32(data));
+		if (IS_ERR(ffs->ffs_eventfd)) {
+			ret = PTR_ERR(ffs->ffs_eventfd);
+			ffs->ffs_eventfd = NULL;
+			goto error;
+		}
+		data += 4;
+		len  -= 4;
+	}
+
+	/* Read fs_count, hs_count and ss_count (if present) */
+	for (i = 0; i < 3; ++i) {
+		if (!(flags & (1 << i))) {
+			counts[i] = 0;
+		} else if (len < 4) {
+			goto error;
+		} else {
+			counts[i] = get_unaligned_le32(data);
+			data += 4;
+			len  -= 4;
+		}
+	}
+	if (flags & (1 << i)) {
+		if (len < 4) {
+			goto error;
+		}
+		os_descs_count = get_unaligned_le32(data);
+		data += 4;
+		len -= 4;
+	}
+
+	/* Read descriptors */
+	raw_descs = data;
+	helper.ffs = ffs;
+	for (i = 0; i < 3; ++i) {
+		if (!counts[i])
+			continue;
+		helper.interfaces_count = 0;
+		helper.eps_count = 0;
+		ret = ffs_do_descs(counts[i], data, len,
+				   __ffs_data_do_entity, &helper);
+		if (ret < 0)
+			goto error;
+		if (!ffs->eps_count && !ffs->interfaces_count) {
+			ffs->eps_count = helper.eps_count;
+			ffs->interfaces_count = helper.interfaces_count;
+		} else {
+			if (ffs->eps_count != helper.eps_count) {
+				ret = -EINVAL;
+				goto error;
+			}
+			if (ffs->interfaces_count != helper.interfaces_count) {
+				ret = -EINVAL;
+				goto error;
+			}
+		}
+		data += ret;
+		len  -= ret;
+	}
+	if (os_descs_count) {
+		ret = ffs_do_os_descs(os_descs_count, data, len,
+				      __ffs_data_do_os_desc, ffs);
+		if (ret < 0)
+			goto error;
+		data += ret;
+		len -= ret;
+	}
+
+	if (raw_descs == data || len) {
+		ret = -EINVAL;
+		goto error;
+	}
+
+	ffs->raw_descs_data	= _data;
+	ffs->raw_descs		= raw_descs;
+	ffs->raw_descs_length	= data - raw_descs;
+	ffs->fs_descs_count	= counts[0];
+	ffs->hs_descs_count	= counts[1];
+	ffs->ss_descs_count	= counts[2];
+	ffs->ms_os_descs_count	= os_descs_count;
+
+	return 0;
+
+error:
+	kfree(_data);
+	return ret;
+}
+
+static int __ffs_data_got_strings(struct ffs_data *ffs,
+				  char *const _data, size_t len)
+{
+	u32 str_count, needed_count, lang_count;
+	struct usb_gadget_strings **stringtabs, *t;
+	const char *data = _data;
+	struct usb_string *s;
+
+	ENTER();
+
+	if (len < 16 ||
+	    get_unaligned_le32(data) != FUNCTIONFS_STRINGS_MAGIC ||
+	    get_unaligned_le32(data + 4) != len)
+		goto error;
+	str_count  = get_unaligned_le32(data + 8);
+	lang_count = get_unaligned_le32(data + 12);
+
+	/* if one is zero the other must be zero */
+	if (!str_count != !lang_count)
+		goto error;
+
+	/* Do we have at least as many strings as descriptors need? */
+	needed_count = ffs->strings_count;
+	if (str_count < needed_count)
+		goto error;
+
+	/*
+	 * If we don't need any strings just return and free all
+	 * memory.
+	 */
+	if (!needed_count) {
+		kfree(_data);
+		return 0;
+	}
+
+	/* Allocate everything in one chunk so there's less maintenance. */
+	{
+		unsigned i = 0;
+		vla_group(d);
+		vla_item(d, struct usb_gadget_strings *, stringtabs,
+			size_add(lang_count, 1));
+		vla_item(d, struct usb_gadget_strings, stringtab, lang_count);
+		vla_item(d, struct usb_string, strings,
+			size_mul(lang_count, (needed_count + 1)));
+
+		char *vlabuf = kmalloc(vla_group_size(d), GFP_KERNEL);
+
+		if (!vlabuf) {
+			kfree(_data);
+			return -ENOMEM;
+		}
+
+		/* Initialize the VLA pointers */
+		stringtabs = vla_ptr(vlabuf, d, stringtabs);
+		t = vla_ptr(vlabuf, d, stringtab);
+		i = lang_count;
+		do {
+			*stringtabs++ = t++;
+		} while (--i);
+		*stringtabs = NULL;
+
+		/* stringtabs = vlabuf = d_stringtabs for later kfree */
+		stringtabs = vla_ptr(vlabuf, d, stringtabs);
+		t = vla_ptr(vlabuf, d, stringtab);
+		s = vla_ptr(vlabuf, d, strings);
+	}
+
+	/* For each language */
+	data += 16;
+	len -= 16;
+
+	do { /* lang_count > 0 so we can use do-while */
+		unsigned needed = needed_count;
+		u32 str_per_lang = str_count;
+
+		if (len < 3)
+			goto error_free;
+		t->language = get_unaligned_le16(data);
+		t->strings  = s;
+		++t;
+
+		data += 2;
+		len -= 2;
+
+		/* For each string */
+		do { /* str_count > 0 so we can use do-while */
+			size_t length = strnlen(data, len);
+
+			if (length == len)
+				goto error_free;
+
+			/*
+			 * User may provide more strings then we need,
+			 * if that's the case we simply ignore the
+			 * rest
+			 */
+			if (needed) {
+				/*
+				 * s->id will be set while adding
+				 * function to configuration so for
+				 * now just leave garbage here.
+				 */
+				s->s = data;
+				--needed;
+				++s;
+			}
+
+			data += length + 1;
+			len -= length + 1;
+		} while (--str_per_lang);
+
+		s->id = 0;   /* terminator */
+		s->s = NULL;
+		++s;
+
+	} while (--lang_count);
+
+	/* Some garbage left? */
+	if (len)
+		goto error_free;
+
+	/* Done! */
+	ffs->stringtabs = stringtabs;
+	ffs->raw_strings = _data;
+
+	return 0;
+
+error_free:
+	kfree(stringtabs);
+error:
+	kfree(_data);
+	return -EINVAL;
+}
+
+
+/* Events handling and management *******************************************/
+
+static void __ffs_event_add(struct ffs_data *ffs,
+			    enum usb_functionfs_event_type type)
+{
+	enum usb_functionfs_event_type rem_type1, rem_type2 = type;
+	int neg = 0;
+
+	/*
+	 * Abort any unhandled setup
+	 *
+	 * We do not need to worry about some cmpxchg() changing value
+	 * of ffs->setup_state without holding the lock because when
+	 * state is FFS_SETUP_PENDING cmpxchg() in several places in
+	 * the source does nothing.
+	 */
+	if (ffs->setup_state == FFS_SETUP_PENDING)
+		ffs->setup_state = FFS_SETUP_CANCELLED;
+
+	/*
+	 * Logic of this function guarantees that there are at most four pending
+	 * evens on ffs->ev.types queue.  This is important because the queue
+	 * has space for four elements only and __ffs_ep0_read_events function
+	 * depends on that limit as well.  If more event types are added, those
+	 * limits have to be revisited or guaranteed to still hold.
+	 */
+	switch (type) {
+	case FUNCTIONFS_RESUME:
+		rem_type2 = FUNCTIONFS_SUSPEND;
+		fallthrough;
+	case FUNCTIONFS_SUSPEND:
+	case FUNCTIONFS_SETUP:
+		rem_type1 = type;
+		/* Discard all similar events */
+		break;
+
+	case FUNCTIONFS_BIND:
+	case FUNCTIONFS_UNBIND:
+	case FUNCTIONFS_DISABLE:
+	case FUNCTIONFS_ENABLE:
+		/* Discard everything other then power management. */
+		rem_type1 = FUNCTIONFS_SUSPEND;
+		rem_type2 = FUNCTIONFS_RESUME;
+		neg = 1;
+		break;
+
+	default:
+		WARN(1, "%d: unknown event, this should not happen\n", type);
+		return;
+	}
+
+	{
+		u8 *ev  = ffs->ev.types, *out = ev;
+		unsigned n = ffs->ev.count;
+		for (; n; --n, ++ev)
+			if ((*ev == rem_type1 || *ev == rem_type2) == neg)
+				*out++ = *ev;
+			else
+				pr_vdebug("purging event %d\n", *ev);
+		ffs->ev.count = out - ffs->ev.types;
+	}
+
+	pr_vdebug("adding event %d\n", type);
+	ffs->ev.types[ffs->ev.count++] = type;
+	wake_up_locked(&ffs->ev.waitq);
+	if (ffs->ffs_eventfd)
+		eventfd_signal(ffs->ffs_eventfd, 1);
+}
+
+static void ffs_event_add(struct ffs_data *ffs,
+			  enum usb_functionfs_event_type type)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&ffs->ev.waitq.lock, flags);
+	__ffs_event_add(ffs, type);
+	spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags);
+}
+
+/* Bind/unbind USB function hooks *******************************************/
+
+static int ffs_ep_addr2idx(struct ffs_data *ffs, u8 endpoint_address)
+{
+	int i;
+
+	for (i = 1; i < ARRAY_SIZE(ffs->eps_addrmap); ++i)
+		if (ffs->eps_addrmap[i] == endpoint_address)
+			return i;
+	return -ENOENT;
+}
+
+static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
+				    struct usb_descriptor_header *desc,
+				    void *priv)
+{
+	struct usb_endpoint_descriptor *ds = (void *)desc;
+	struct ffs_function *func = priv;
+	struct ffs_ep *ffs_ep;
+	unsigned ep_desc_id;
+	int idx;
+	static const char *speed_names[] = { "full", "high", "super" };
+
+	if (type != FFS_DESCRIPTOR)
+		return 0;
+
+	/*
+	 * If ss_descriptors is not NULL, we are reading super speed
+	 * descriptors; if hs_descriptors is not NULL, we are reading high
+	 * speed descriptors; otherwise, we are reading full speed
+	 * descriptors.
+	 */
+	if (func->function.ss_descriptors) {
+		ep_desc_id = 2;
+		func->function.ss_descriptors[(long)valuep] = desc;
+	} else if (func->function.hs_descriptors) {
+		ep_desc_id = 1;
+		func->function.hs_descriptors[(long)valuep] = desc;
+	} else {
+		ep_desc_id = 0;
+		func->function.fs_descriptors[(long)valuep]    = desc;
+	}
+
+	if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT)
+		return 0;
+
+	idx = ffs_ep_addr2idx(func->ffs, ds->bEndpointAddress) - 1;
+	if (idx < 0)
+		return idx;
+
+	ffs_ep = func->eps + idx;
+
+	if (ffs_ep->descs[ep_desc_id]) {
+		pr_err("two %sspeed descriptors for EP %d\n",
+			  speed_names[ep_desc_id],
+			  ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+		return -EINVAL;
+	}
+	ffs_ep->descs[ep_desc_id] = ds;
+
+	ffs_dump_mem(": Original  ep desc", ds, ds->bLength);
+	if (ffs_ep->ep) {
+		ds->bEndpointAddress = ffs_ep->descs[0]->bEndpointAddress;
+		if (!ds->wMaxPacketSize)
+			ds->wMaxPacketSize = ffs_ep->descs[0]->wMaxPacketSize;
+	} else {
+		struct usb_request *req;
+		struct usb_ep *ep;
+		u8 bEndpointAddress;
+		u16 wMaxPacketSize;
+
+		/*
+		 * We back up bEndpointAddress because autoconfig overwrites
+		 * it with physical endpoint address.
+		 */
+		bEndpointAddress = ds->bEndpointAddress;
+		/*
+		 * We back up wMaxPacketSize because autoconfig treats
+		 * endpoint descriptors as if they were full speed.
+		 */
+		wMaxPacketSize = ds->wMaxPacketSize;
+		pr_vdebug("autoconfig\n");
+		ep = usb_ep_autoconfig(func->gadget, ds);
+		if (!ep)
+			return -ENOTSUPP;
+		ep->driver_data = func->eps + idx;
+
+		req = usb_ep_alloc_request(ep, GFP_KERNEL);
+		if (!req)
+			return -ENOMEM;
+
+		ffs_ep->ep  = ep;
+		ffs_ep->req = req;
+		func->eps_revmap[ds->bEndpointAddress &
+				 USB_ENDPOINT_NUMBER_MASK] = idx + 1;
+		/*
+		 * If we use virtual address mapping, we restore
+		 * original bEndpointAddress value.
+		 */
+		if (func->ffs->user_flags & FUNCTIONFS_VIRTUAL_ADDR)
+			ds->bEndpointAddress = bEndpointAddress;
+		/*
+		 * Restore wMaxPacketSize which was potentially
+		 * overwritten by autoconfig.
+		 */
+		ds->wMaxPacketSize = wMaxPacketSize;
+	}
+	ffs_dump_mem(": Rewritten ep desc", ds, ds->bLength);
+
+	return 0;
+}
+
+static int __ffs_func_bind_do_nums(enum ffs_entity_type type, u8 *valuep,
+				   struct usb_descriptor_header *desc,
+				   void *priv)
+{
+	struct ffs_function *func = priv;
+	unsigned idx;
+	u8 newValue;
+
+	switch (type) {
+	default:
+	case FFS_DESCRIPTOR:
+		/* Handled in previous pass by __ffs_func_bind_do_descs() */
+		return 0;
+
+	case FFS_INTERFACE:
+		idx = *valuep;
+		if (func->interfaces_nums[idx] < 0) {
+			int id = usb_interface_id(func->conf, &func->function);
+			if (id < 0)
+				return id;
+			func->interfaces_nums[idx] = id;
+		}
+		newValue = func->interfaces_nums[idx];
+		break;
+
+	case FFS_STRING:
+		/* String' IDs are allocated when fsf_data is bound to cdev */
+		newValue = func->ffs->stringtabs[0]->strings[*valuep - 1].id;
+		break;
+
+	case FFS_ENDPOINT:
+		/*
+		 * USB_DT_ENDPOINT are handled in
+		 * __ffs_func_bind_do_descs().
+		 */
+		if (desc->bDescriptorType == USB_DT_ENDPOINT)
+			return 0;
+
+		idx = (*valuep & USB_ENDPOINT_NUMBER_MASK) - 1;
+		if (!func->eps[idx].ep)
+			return -EINVAL;
+
+		{
+			struct usb_endpoint_descriptor **descs;
+			descs = func->eps[idx].descs;
+			newValue = descs[descs[0] ? 0 : 1]->bEndpointAddress;
+		}
+		break;
+	}
+
+	pr_vdebug("%02x -> %02x\n", *valuep, newValue);
+	*valuep = newValue;
+	return 0;
+}
+
+static int __ffs_func_bind_do_os_desc(enum ffs_os_desc_type type,
+				      struct usb_os_desc_header *h, void *data,
+				      unsigned len, void *priv)
+{
+	struct ffs_function *func = priv;
+	u8 length = 0;
+
+	switch (type) {
+	case FFS_OS_DESC_EXT_COMPAT: {
+		struct usb_ext_compat_desc *desc = data;
+		struct usb_os_desc_table *t;
+
+		t = &func->function.os_desc_table[desc->bFirstInterfaceNumber];
+		t->if_id = func->interfaces_nums[desc->bFirstInterfaceNumber];
+		memcpy(t->os_desc->ext_compat_id, &desc->CompatibleID,
+		       ARRAY_SIZE(desc->CompatibleID) +
+		       ARRAY_SIZE(desc->SubCompatibleID));
+		length = sizeof(*desc);
+	}
+		break;
+	case FFS_OS_DESC_EXT_PROP: {
+		struct usb_ext_prop_desc *desc = data;
+		struct usb_os_desc_table *t;
+		struct usb_os_desc_ext_prop *ext_prop;
+		char *ext_prop_name;
+		char *ext_prop_data;
+
+		t = &func->function.os_desc_table[h->interface];
+		t->if_id = func->interfaces_nums[h->interface];
+
+		ext_prop = func->ffs->ms_os_descs_ext_prop_avail;
+		func->ffs->ms_os_descs_ext_prop_avail += sizeof(*ext_prop);
+
+		ext_prop->type = le32_to_cpu(desc->dwPropertyDataType);
+		ext_prop->name_len = le16_to_cpu(desc->wPropertyNameLength);
+		ext_prop->data_len = le32_to_cpu(*(__le32 *)
+			usb_ext_prop_data_len_ptr(data, ext_prop->name_len));
+		length = ext_prop->name_len + ext_prop->data_len + 14;
+
+		ext_prop_name = func->ffs->ms_os_descs_ext_prop_name_avail;
+		func->ffs->ms_os_descs_ext_prop_name_avail +=
+			ext_prop->name_len;
+
+		ext_prop_data = func->ffs->ms_os_descs_ext_prop_data_avail;
+		func->ffs->ms_os_descs_ext_prop_data_avail +=
+			ext_prop->data_len;
+		memcpy(ext_prop_data,
+		       usb_ext_prop_data_ptr(data, ext_prop->name_len),
+		       ext_prop->data_len);
+		/* unicode data reported to the host as "WCHAR"s */
+		switch (ext_prop->type) {
+		case USB_EXT_PROP_UNICODE:
+		case USB_EXT_PROP_UNICODE_ENV:
+		case USB_EXT_PROP_UNICODE_LINK:
+		case USB_EXT_PROP_UNICODE_MULTI:
+			ext_prop->data_len *= 2;
+			break;
+		}
+		ext_prop->data = ext_prop_data;
+
+		memcpy(ext_prop_name, usb_ext_prop_name_ptr(data),
+		       ext_prop->name_len);
+		/* property name reported to the host as "WCHAR"s */
+		ext_prop->name_len *= 2;
+		ext_prop->name = ext_prop_name;
+
+		t->os_desc->ext_prop_len +=
+			ext_prop->name_len + ext_prop->data_len + 14;
+		++t->os_desc->ext_prop_count;
+		list_add_tail(&ext_prop->entry, &t->os_desc->ext_prop);
+	}
+		break;
+	default:
+		pr_vdebug("unknown descriptor: %d\n", type);
+	}
+
+	return length;
+}
+
+static inline struct f_fs_opts *ffs_do_functionfs_bind(struct usb_function *f,
+						struct usb_configuration *c)
+{
+	struct ffs_function *func = ffs_func_from_usb(f);
+	struct f_fs_opts *ffs_opts =
+		container_of(f->fi, struct f_fs_opts, func_inst);
+	struct ffs_data *ffs_data;
+	int ret;
+
+	ENTER();
+
+	/*
+	 * Legacy gadget triggers binding in functionfs_ready_callback,
+	 * which already uses locking; taking the same lock here would
+	 * cause a deadlock.
+	 *
+	 * Configfs-enabled gadgets however do need ffs_dev_lock.
+	 */
+	if (!ffs_opts->no_configfs)
+		ffs_dev_lock();
+	ret = ffs_opts->dev->desc_ready ? 0 : -ENODEV;
+	ffs_data = ffs_opts->dev->ffs_data;
+	if (!ffs_opts->no_configfs)
+		ffs_dev_unlock();
+	if (ret)
+		return ERR_PTR(ret);
+
+	func->ffs = ffs_data;
+	func->conf = c;
+	func->gadget = c->cdev->gadget;
+
+	/*
+	 * in drivers/usb/gadget/configfs.c:configfs_composite_bind()
+	 * configurations are bound in sequence with list_for_each_entry,
+	 * in each configuration its functions are bound in sequence
+	 * with list_for_each_entry, so we assume no race condition
+	 * with regard to ffs_opts->bound access
+	 */
+	if (!ffs_opts->refcnt) {
+		ret = functionfs_bind(func->ffs, c->cdev);
+		if (ret)
+			return ERR_PTR(ret);
+	}
+	ffs_opts->refcnt++;
+	func->function.strings = func->ffs->stringtabs;
+
+	return ffs_opts;
+}
+
+static int _ffs_func_bind(struct usb_configuration *c,
+			  struct usb_function *f)
+{
+	struct ffs_function *func = ffs_func_from_usb(f);
+	struct ffs_data *ffs = func->ffs;
+
+	const int full = !!func->ffs->fs_descs_count;
+	const int high = !!func->ffs->hs_descs_count;
+	const int super = !!func->ffs->ss_descs_count;
+
+	int fs_len, hs_len, ss_len, ret, i;
+	struct ffs_ep *eps_ptr;
+
+	/* Make it a single chunk, less management later on */
+	vla_group(d);
+	vla_item_with_sz(d, struct ffs_ep, eps, ffs->eps_count);
+	vla_item_with_sz(d, struct usb_descriptor_header *, fs_descs,
+		full ? ffs->fs_descs_count + 1 : 0);
+	vla_item_with_sz(d, struct usb_descriptor_header *, hs_descs,
+		high ? ffs->hs_descs_count + 1 : 0);
+	vla_item_with_sz(d, struct usb_descriptor_header *, ss_descs,
+		super ? ffs->ss_descs_count + 1 : 0);
+	vla_item_with_sz(d, short, inums, ffs->interfaces_count);
+	vla_item_with_sz(d, struct usb_os_desc_table, os_desc_table,
+			 c->cdev->use_os_string ? ffs->interfaces_count : 0);
+	vla_item_with_sz(d, char[16], ext_compat,
+			 c->cdev->use_os_string ? ffs->interfaces_count : 0);
+	vla_item_with_sz(d, struct usb_os_desc, os_desc,
+			 c->cdev->use_os_string ? ffs->interfaces_count : 0);
+	vla_item_with_sz(d, struct usb_os_desc_ext_prop, ext_prop,
+			 ffs->ms_os_descs_ext_prop_count);
+	vla_item_with_sz(d, char, ext_prop_name,
+			 ffs->ms_os_descs_ext_prop_name_len);
+	vla_item_with_sz(d, char, ext_prop_data,
+			 ffs->ms_os_descs_ext_prop_data_len);
+	vla_item_with_sz(d, char, raw_descs, ffs->raw_descs_length);
+	char *vlabuf;
+
+	ENTER();
+
+	/* Has descriptors only for speeds gadget does not support */
+	if (!(full | high | super))
+		return -ENOTSUPP;
+
+	/* Allocate a single chunk, less management later on */
+	vlabuf = kzalloc(vla_group_size(d), GFP_KERNEL);
+	if (!vlabuf)
+		return -ENOMEM;
+
+	ffs->ms_os_descs_ext_prop_avail = vla_ptr(vlabuf, d, ext_prop);
+	ffs->ms_os_descs_ext_prop_name_avail =
+		vla_ptr(vlabuf, d, ext_prop_name);
+	ffs->ms_os_descs_ext_prop_data_avail =
+		vla_ptr(vlabuf, d, ext_prop_data);
+
+	/* Copy descriptors  */
+	memcpy(vla_ptr(vlabuf, d, raw_descs), ffs->raw_descs,
+	       ffs->raw_descs_length);
+
+	memset(vla_ptr(vlabuf, d, inums), 0xff, d_inums__sz);
+	eps_ptr = vla_ptr(vlabuf, d, eps);
+	for (i = 0; i < ffs->eps_count; i++)
+		eps_ptr[i].num = -1;
+
+	/* Save pointers
+	 * d_eps == vlabuf, func->eps used to kfree vlabuf later
+	*/
+	func->eps             = vla_ptr(vlabuf, d, eps);
+	func->interfaces_nums = vla_ptr(vlabuf, d, inums);
+
+	/*
+	 * Go through all the endpoint descriptors and allocate
+	 * endpoints first, so that later we can rewrite the endpoint
+	 * numbers without worrying that it may be described later on.
+	 */
+	if (full) {
+		func->function.fs_descriptors = vla_ptr(vlabuf, d, fs_descs);
+		fs_len = ffs_do_descs(ffs->fs_descs_count,
+				      vla_ptr(vlabuf, d, raw_descs),
+				      d_raw_descs__sz,
+				      __ffs_func_bind_do_descs, func);
+		if (fs_len < 0) {
+			ret = fs_len;
+			goto error;
+		}
+	} else {
+		fs_len = 0;
+	}
+
+	if (high) {
+		func->function.hs_descriptors = vla_ptr(vlabuf, d, hs_descs);
+		hs_len = ffs_do_descs(ffs->hs_descs_count,
+				      vla_ptr(vlabuf, d, raw_descs) + fs_len,
+				      d_raw_descs__sz - fs_len,
+				      __ffs_func_bind_do_descs, func);
+		if (hs_len < 0) {
+			ret = hs_len;
+			goto error;
+		}
+	} else {
+		hs_len = 0;
+	}
+
+	if (super) {
+		func->function.ss_descriptors = func->function.ssp_descriptors =
+			vla_ptr(vlabuf, d, ss_descs);
+		ss_len = ffs_do_descs(ffs->ss_descs_count,
+				vla_ptr(vlabuf, d, raw_descs) + fs_len + hs_len,
+				d_raw_descs__sz - fs_len - hs_len,
+				__ffs_func_bind_do_descs, func);
+		if (ss_len < 0) {
+			ret = ss_len;
+			goto error;
+		}
+	} else {
+		ss_len = 0;
+	}
+
+	/*
+	 * Now handle interface numbers allocation and interface and
+	 * endpoint numbers rewriting.  We can do that in one go
+	 * now.
+	 */
+	ret = ffs_do_descs(ffs->fs_descs_count +
+			   (high ? ffs->hs_descs_count : 0) +
+			   (super ? ffs->ss_descs_count : 0),
+			   vla_ptr(vlabuf, d, raw_descs), d_raw_descs__sz,
+			   __ffs_func_bind_do_nums, func);
+	if (ret < 0)
+		goto error;
+
+	func->function.os_desc_table = vla_ptr(vlabuf, d, os_desc_table);
+	if (c->cdev->use_os_string) {
+		for (i = 0; i < ffs->interfaces_count; ++i) {
+			struct usb_os_desc *desc;
+
+			desc = func->function.os_desc_table[i].os_desc =
+				vla_ptr(vlabuf, d, os_desc) +
+				i * sizeof(struct usb_os_desc);
+			desc->ext_compat_id =
+				vla_ptr(vlabuf, d, ext_compat) + i * 16;
+			INIT_LIST_HEAD(&desc->ext_prop);
+		}
+		ret = ffs_do_os_descs(ffs->ms_os_descs_count,
+				      vla_ptr(vlabuf, d, raw_descs) +
+				      fs_len + hs_len + ss_len,
+				      d_raw_descs__sz - fs_len - hs_len -
+				      ss_len,
+				      __ffs_func_bind_do_os_desc, func);
+		if (ret < 0)
+			goto error;
+	}
+	func->function.os_desc_n =
+		c->cdev->use_os_string ? ffs->interfaces_count : 0;
+
+	/* And we're done */
+	ffs_event_add(ffs, FUNCTIONFS_BIND);
+	return 0;
+
+error:
+	/* XXX Do we need to release all claimed endpoints here? */
+	return ret;
+}
+
+static int ffs_func_bind(struct usb_configuration *c,
+			 struct usb_function *f)
+{
+	struct f_fs_opts *ffs_opts = ffs_do_functionfs_bind(f, c);
+	struct ffs_function *func = ffs_func_from_usb(f);
+	int ret;
+
+	if (IS_ERR(ffs_opts))
+		return PTR_ERR(ffs_opts);
+
+	ret = _ffs_func_bind(c, f);
+	if (ret && !--ffs_opts->refcnt)
+		functionfs_unbind(func->ffs);
+
+	return ret;
+}
+
+
+/* Other USB function hooks *************************************************/
+
+static void ffs_reset_work(struct work_struct *work)
+{
+	struct ffs_data *ffs = container_of(work,
+		struct ffs_data, reset_work);
+	ffs_data_reset(ffs);
+}
+
+static int ffs_func_set_alt(struct usb_function *f,
+			    unsigned interface, unsigned alt)
+{
+	struct ffs_function *func = ffs_func_from_usb(f);
+	struct ffs_data *ffs = func->ffs;
+	int ret = 0, intf;
+
+	if (alt != (unsigned)-1) {
+		intf = ffs_func_revmap_intf(func, interface);
+		if (intf < 0)
+			return intf;
+	}
+
+	if (ffs->func)
+		ffs_func_eps_disable(ffs->func);
+
+	if (ffs->state == FFS_DEACTIVATED) {
+		ffs->state = FFS_CLOSING;
+		INIT_WORK(&ffs->reset_work, ffs_reset_work);
+		schedule_work(&ffs->reset_work);
+		return -ENODEV;
+	}
+
+	if (ffs->state != FFS_ACTIVE)
+		return -ENODEV;
+
+	if (alt == (unsigned)-1) {
+		ffs->func = NULL;
+		ffs_event_add(ffs, FUNCTIONFS_DISABLE);
+		return 0;
+	}
+
+	ffs->func = func;
+	ret = ffs_func_eps_enable(func);
+	if (ret >= 0)
+		ffs_event_add(ffs, FUNCTIONFS_ENABLE);
+	return ret;
+}
+
+static void ffs_func_disable(struct usb_function *f)
+{
+	ffs_func_set_alt(f, 0, (unsigned)-1);
+}
+
+static int ffs_func_setup(struct usb_function *f,
+			  const struct usb_ctrlrequest *creq)
+{
+	struct ffs_function *func = ffs_func_from_usb(f);
+	struct ffs_data *ffs = func->ffs;
+	unsigned long flags;
+	int ret;
+
+	ENTER();
+
+	pr_vdebug("creq->bRequestType = %02x\n", creq->bRequestType);
+	pr_vdebug("creq->bRequest     = %02x\n", creq->bRequest);
+	pr_vdebug("creq->wValue       = %04x\n", le16_to_cpu(creq->wValue));
+	pr_vdebug("creq->wIndex       = %04x\n", le16_to_cpu(creq->wIndex));
+	pr_vdebug("creq->wLength      = %04x\n", le16_to_cpu(creq->wLength));
+
+	/*
+	 * Most requests directed to interface go through here
+	 * (notable exceptions are set/get interface) so we need to
+	 * handle them.  All other either handled by composite or
+	 * passed to usb_configuration->setup() (if one is set).  No
+	 * matter, we will handle requests directed to endpoint here
+	 * as well (as it's straightforward).  Other request recipient
+	 * types are only handled when the user flag FUNCTIONFS_ALL_CTRL_RECIP
+	 * is being used.
+	 */
+	if (ffs->state != FFS_ACTIVE)
+		return -ENODEV;
+
+	switch (creq->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_INTERFACE:
+		ret = ffs_func_revmap_intf(func, le16_to_cpu(creq->wIndex));
+		if (ret < 0)
+			return ret;
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		ret = ffs_func_revmap_ep(func, le16_to_cpu(creq->wIndex));
+		if (ret < 0)
+			return ret;
+		if (func->ffs->user_flags & FUNCTIONFS_VIRTUAL_ADDR)
+			ret = func->ffs->eps_addrmap[ret];
+		break;
+
+	default:
+		if (func->ffs->user_flags & FUNCTIONFS_ALL_CTRL_RECIP)
+			ret = le16_to_cpu(creq->wIndex);
+		else
+			return -EOPNOTSUPP;
+	}
+
+	spin_lock_irqsave(&ffs->ev.waitq.lock, flags);
+	ffs->ev.setup = *creq;
+	ffs->ev.setup.wIndex = cpu_to_le16(ret);
+	__ffs_event_add(ffs, FUNCTIONFS_SETUP);
+	spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags);
+
+	return creq->wLength == 0 ? USB_GADGET_DELAYED_STATUS : 0;
+}
+
+static bool ffs_func_req_match(struct usb_function *f,
+			       const struct usb_ctrlrequest *creq,
+			       bool config0)
+{
+	struct ffs_function *func = ffs_func_from_usb(f);
+
+	if (config0 && !(func->ffs->user_flags & FUNCTIONFS_CONFIG0_SETUP))
+		return false;
+
+	switch (creq->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_INTERFACE:
+		return (ffs_func_revmap_intf(func,
+					     le16_to_cpu(creq->wIndex)) >= 0);
+	case USB_RECIP_ENDPOINT:
+		return (ffs_func_revmap_ep(func,
+					   le16_to_cpu(creq->wIndex)) >= 0);
+	default:
+		return (bool) (func->ffs->user_flags &
+			       FUNCTIONFS_ALL_CTRL_RECIP);
+	}
+}
+
+static void ffs_func_suspend(struct usb_function *f)
+{
+	ENTER();
+	ffs_event_add(ffs_func_from_usb(f)->ffs, FUNCTIONFS_SUSPEND);
+}
+
+static void ffs_func_resume(struct usb_function *f)
+{
+	ENTER();
+	ffs_event_add(ffs_func_from_usb(f)->ffs, FUNCTIONFS_RESUME);
+}
+
+
+/* Endpoint and interface numbers reverse mapping ***************************/
+
+static int ffs_func_revmap_ep(struct ffs_function *func, u8 num)
+{
+	num = func->eps_revmap[num & USB_ENDPOINT_NUMBER_MASK];
+	return num ? num : -EDOM;
+}
+
+static int ffs_func_revmap_intf(struct ffs_function *func, u8 intf)
+{
+	short *nums = func->interfaces_nums;
+	unsigned count = func->ffs->interfaces_count;
+
+	for (; count; --count, ++nums) {
+		if (*nums >= 0 && *nums == intf)
+			return nums - func->interfaces_nums;
+	}
+
+	return -EDOM;
+}
+
+
+/* Devices management *******************************************************/
+
+static LIST_HEAD(ffs_devices);
+
+static struct ffs_dev *_ffs_do_find_dev(const char *name)
+{
+	struct ffs_dev *dev;
+
+	if (!name)
+		return NULL;
+
+	list_for_each_entry(dev, &ffs_devices, entry) {
+		if (strcmp(dev->name, name) == 0)
+			return dev;
+	}
+
+	return NULL;
+}
+
+/*
+ * ffs_lock must be taken by the caller of this function
+ */
+static struct ffs_dev *_ffs_get_single_dev(void)
+{
+	struct ffs_dev *dev;
+
+	if (list_is_singular(&ffs_devices)) {
+		dev = list_first_entry(&ffs_devices, struct ffs_dev, entry);
+		if (dev->single)
+			return dev;
+	}
+
+	return NULL;
+}
+
+/*
+ * ffs_lock must be taken by the caller of this function
+ */
+static struct ffs_dev *_ffs_find_dev(const char *name)
+{
+	struct ffs_dev *dev;
+
+	dev = _ffs_get_single_dev();
+	if (dev)
+		return dev;
+
+	return _ffs_do_find_dev(name);
+}
+
+/* Configfs support *********************************************************/
+
+static inline struct f_fs_opts *to_ffs_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_fs_opts,
+			    func_inst.group);
+}
+
+static void ffs_attr_release(struct config_item *item)
+{
+	struct f_fs_opts *opts = to_ffs_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations ffs_item_ops = {
+	.release	= ffs_attr_release,
+};
+
+static const struct config_item_type ffs_func_type = {
+	.ct_item_ops	= &ffs_item_ops,
+	.ct_owner	= THIS_MODULE,
+};
+
+
+/* Function registration interface ******************************************/
+
+static void ffs_free_inst(struct usb_function_instance *f)
+{
+	struct f_fs_opts *opts;
+
+	opts = to_f_fs_opts(f);
+	ffs_release_dev(opts->dev);
+	ffs_dev_lock();
+	_ffs_free_dev(opts->dev);
+	ffs_dev_unlock();
+	kfree(opts);
+}
+
+static int ffs_set_inst_name(struct usb_function_instance *fi, const char *name)
+{
+	if (strlen(name) >= sizeof_field(struct ffs_dev, name))
+		return -ENAMETOOLONG;
+	return ffs_name_dev(to_f_fs_opts(fi)->dev, name);
+}
+
+static struct usb_function_instance *ffs_alloc_inst(void)
+{
+	struct f_fs_opts *opts;
+	struct ffs_dev *dev;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+
+	opts->func_inst.set_inst_name = ffs_set_inst_name;
+	opts->func_inst.free_func_inst = ffs_free_inst;
+	ffs_dev_lock();
+	dev = _ffs_alloc_dev();
+	ffs_dev_unlock();
+	if (IS_ERR(dev)) {
+		kfree(opts);
+		return ERR_CAST(dev);
+	}
+	opts->dev = dev;
+	dev->opts = opts;
+
+	config_group_init_type_name(&opts->func_inst.group, "",
+				    &ffs_func_type);
+	return &opts->func_inst;
+}
+
+static void ffs_free(struct usb_function *f)
+{
+	kfree(ffs_func_from_usb(f));
+}
+
+static void ffs_func_unbind(struct usb_configuration *c,
+			    struct usb_function *f)
+{
+	struct ffs_function *func = ffs_func_from_usb(f);
+	struct ffs_data *ffs = func->ffs;
+	struct f_fs_opts *opts =
+		container_of(f->fi, struct f_fs_opts, func_inst);
+	struct ffs_ep *ep = func->eps;
+	unsigned count = ffs->eps_count;
+	unsigned long flags;
+
+	ENTER();
+	if (ffs->func == func) {
+		ffs_func_eps_disable(func);
+		ffs->func = NULL;
+	}
+
+	/* Drain any pending AIO completions */
+	drain_workqueue(ffs->io_completion_wq);
+
+	ffs_event_add(ffs, FUNCTIONFS_UNBIND);
+	if (!--opts->refcnt)
+		functionfs_unbind(ffs);
+
+	/* cleanup after autoconfig */
+	spin_lock_irqsave(&func->ffs->eps_lock, flags);
+	while (count--) {
+		if (ep->ep && ep->req)
+			usb_ep_free_request(ep->ep, ep->req);
+		ep->req = NULL;
+		++ep;
+	}
+	spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
+	kfree(func->eps);
+	func->eps = NULL;
+	/*
+	 * eps, descriptors and interfaces_nums are allocated in the
+	 * same chunk so only one free is required.
+	 */
+	func->function.fs_descriptors = NULL;
+	func->function.hs_descriptors = NULL;
+	func->function.ss_descriptors = NULL;
+	func->function.ssp_descriptors = NULL;
+	func->interfaces_nums = NULL;
+
+}
+
+static struct usb_function *ffs_alloc(struct usb_function_instance *fi)
+{
+	struct ffs_function *func;
+
+	ENTER();
+
+	func = kzalloc(sizeof(*func), GFP_KERNEL);
+	if (!func)
+		return ERR_PTR(-ENOMEM);
+
+	func->function.name    = "Function FS Gadget";
+
+	func->function.bind    = ffs_func_bind;
+	func->function.unbind  = ffs_func_unbind;
+	func->function.set_alt = ffs_func_set_alt;
+	func->function.disable = ffs_func_disable;
+	func->function.setup   = ffs_func_setup;
+	func->function.req_match = ffs_func_req_match;
+	func->function.suspend = ffs_func_suspend;
+	func->function.resume  = ffs_func_resume;
+	func->function.free_func = ffs_free;
+
+	return &func->function;
+}
+
+/*
+ * ffs_lock must be taken by the caller of this function
+ */
+static struct ffs_dev *_ffs_alloc_dev(void)
+{
+	struct ffs_dev *dev;
+	int ret;
+
+	if (_ffs_get_single_dev())
+			return ERR_PTR(-EBUSY);
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	if (list_empty(&ffs_devices)) {
+		ret = functionfs_init();
+		if (ret) {
+			kfree(dev);
+			return ERR_PTR(ret);
+		}
+	}
+
+	list_add(&dev->entry, &ffs_devices);
+
+	return dev;
+}
+
+int ffs_name_dev(struct ffs_dev *dev, const char *name)
+{
+	struct ffs_dev *existing;
+	int ret = 0;
+
+	ffs_dev_lock();
+
+	existing = _ffs_do_find_dev(name);
+	if (!existing)
+		strscpy(dev->name, name, ARRAY_SIZE(dev->name));
+	else if (existing != dev)
+		ret = -EBUSY;
+
+	ffs_dev_unlock();
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ffs_name_dev);
+
+int ffs_single_dev(struct ffs_dev *dev)
+{
+	int ret;
+
+	ret = 0;
+	ffs_dev_lock();
+
+	if (!list_is_singular(&ffs_devices))
+		ret = -EBUSY;
+	else
+		dev->single = true;
+
+	ffs_dev_unlock();
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ffs_single_dev);
+
+/*
+ * ffs_lock must be taken by the caller of this function
+ */
+static void _ffs_free_dev(struct ffs_dev *dev)
+{
+	list_del(&dev->entry);
+
+	kfree(dev);
+	if (list_empty(&ffs_devices))
+		functionfs_cleanup();
+}
+
+static int ffs_acquire_dev(const char *dev_name, struct ffs_data *ffs_data)
+{
+	int ret = 0;
+	struct ffs_dev *ffs_dev;
+
+	ENTER();
+	ffs_dev_lock();
+
+	ffs_dev = _ffs_find_dev(dev_name);
+	if (!ffs_dev) {
+		ret = -ENOENT;
+	} else if (ffs_dev->mounted) {
+		ret = -EBUSY;
+	} else if (ffs_dev->ffs_acquire_dev_callback &&
+		   ffs_dev->ffs_acquire_dev_callback(ffs_dev)) {
+		ret = -ENOENT;
+	} else {
+		ffs_dev->mounted = true;
+		ffs_dev->ffs_data = ffs_data;
+		ffs_data->private_data = ffs_dev;
+	}
+
+	ffs_dev_unlock();
+	return ret;
+}
+
+static void ffs_release_dev(struct ffs_dev *ffs_dev)
+{
+	ENTER();
+	ffs_dev_lock();
+
+	if (ffs_dev && ffs_dev->mounted) {
+		ffs_dev->mounted = false;
+		if (ffs_dev->ffs_data) {
+			ffs_dev->ffs_data->private_data = NULL;
+			ffs_dev->ffs_data = NULL;
+		}
+
+		if (ffs_dev->ffs_release_dev_callback)
+			ffs_dev->ffs_release_dev_callback(ffs_dev);
+	}
+
+	ffs_dev_unlock();
+}
+
+static int ffs_ready(struct ffs_data *ffs)
+{
+	struct ffs_dev *ffs_obj;
+	int ret = 0;
+
+	ENTER();
+	ffs_dev_lock();
+
+	ffs_obj = ffs->private_data;
+	if (!ffs_obj) {
+		ret = -EINVAL;
+		goto done;
+	}
+	if (WARN_ON(ffs_obj->desc_ready)) {
+		ret = -EBUSY;
+		goto done;
+	}
+
+	ffs_obj->desc_ready = true;
+
+	if (ffs_obj->ffs_ready_callback) {
+		ret = ffs_obj->ffs_ready_callback(ffs);
+		if (ret)
+			goto done;
+	}
+
+	set_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags);
+done:
+	ffs_dev_unlock();
+	return ret;
+}
+
+static void ffs_closed(struct ffs_data *ffs)
+{
+	struct ffs_dev *ffs_obj;
+	struct f_fs_opts *opts;
+	struct config_item *ci;
+
+	ENTER();
+	ffs_dev_lock();
+
+	ffs_obj = ffs->private_data;
+	if (!ffs_obj)
+		goto done;
+
+	ffs_obj->desc_ready = false;
+
+	if (test_and_clear_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags) &&
+	    ffs_obj->ffs_closed_callback)
+		ffs_obj->ffs_closed_callback(ffs);
+
+	if (ffs_obj->opts)
+		opts = ffs_obj->opts;
+	else
+		goto done;
+
+	if (opts->no_configfs || !opts->func_inst.group.cg_item.ci_parent
+	    || !kref_read(&opts->func_inst.group.cg_item.ci_kref))
+		goto done;
+
+	ci = opts->func_inst.group.cg_item.ci_parent->ci_parent;
+	ffs_dev_unlock();
+
+	if (test_bit(FFS_FL_BOUND, &ffs->flags))
+		unregister_gadget_item(ci);
+	return;
+done:
+	ffs_dev_unlock();
+}
+
+/* Misc helper functions ****************************************************/
+
+static int ffs_mutex_lock(struct mutex *mutex, unsigned nonblock)
+{
+	return nonblock
+		? mutex_trylock(mutex) ? 0 : -EAGAIN
+		: mutex_lock_interruptible(mutex);
+}
+
+static char *ffs_prepare_buffer(const char __user *buf, size_t len)
+{
+	char *data;
+
+	if (!len)
+		return NULL;
+
+	data = memdup_user(buf, len);
+	if (IS_ERR(data))
+		return data;
+
+	pr_vdebug("Buffer from user space:\n");
+	ffs_dump_mem("", data, len);
+
+	return data;
+}
+
+DECLARE_USB_FUNCTION_INIT(ffs, ffs_alloc_inst, ffs_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michal Nazarewicz");
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
new file mode 100644
index 000000000..f1ca9250c
--- /dev/null
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -0,0 +1,1357 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_hid.c -- USB HID function driver
+ *
+ * Copyright (C) 2010 Fabien Chouteau <fabien.chouteau@barco.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/hid.h>
+#include <linux/idr.h>
+#include <linux/cdev.h>
+#include <linux/mutex.h>
+#include <linux/poll.h>
+#include <linux/uaccess.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/usb/g_hid.h>
+
+#include "u_f.h"
+#include "u_hid.h"
+
+#define HIDG_MINORS	4
+
+static int major, minors;
+static struct class *hidg_class;
+static DEFINE_IDA(hidg_ida);
+static DEFINE_MUTEX(hidg_ida_lock); /* protects access to hidg_ida */
+
+/*-------------------------------------------------------------------------*/
+/*                            HID gadget struct                            */
+
+struct f_hidg_req_list {
+	struct usb_request	*req;
+	unsigned int		pos;
+	struct list_head 	list;
+};
+
+struct f_hidg {
+	/* configuration */
+	unsigned char			bInterfaceSubClass;
+	unsigned char			bInterfaceProtocol;
+	unsigned char			protocol;
+	unsigned char			idle;
+	unsigned short			report_desc_length;
+	char				*report_desc;
+	unsigned short			report_length;
+	/*
+	 * use_out_ep - if true, the OUT Endpoint (interrupt out method)
+	 *              will be used to receive reports from the host
+	 *              using functions with the "intout" suffix.
+	 *              Otherwise, the OUT Endpoint will not be configured
+	 *              and the SETUP/SET_REPORT method ("ssreport" suffix)
+	 *              will be used to receive reports.
+	 */
+	bool				use_out_ep;
+
+	/* recv report */
+	spinlock_t			read_spinlock;
+	wait_queue_head_t		read_queue;
+	/* recv report - interrupt out only (use_out_ep == 1) */
+	struct list_head		completed_out_req;
+	unsigned int			qlen;
+	/* recv report - setup set_report only (use_out_ep == 0) */
+	char				*set_report_buf;
+	unsigned int			set_report_length;
+
+	/* send report */
+	spinlock_t			write_spinlock;
+	bool				write_pending;
+	wait_queue_head_t		write_queue;
+	struct usb_request		*req;
+
+	struct device			dev;
+	struct cdev			cdev;
+	struct usb_function		func;
+
+	struct usb_ep			*in_ep;
+	struct usb_ep			*out_ep;
+};
+
+static inline struct f_hidg *func_to_hidg(struct usb_function *f)
+{
+	return container_of(f, struct f_hidg, func);
+}
+
+static void hidg_release(struct device *dev)
+{
+	struct f_hidg *hidg = container_of(dev, struct f_hidg, dev);
+
+	kfree(hidg->report_desc);
+	kfree(hidg->set_report_buf);
+	kfree(hidg);
+}
+
+/*-------------------------------------------------------------------------*/
+/*                           Static descriptors                            */
+
+static struct usb_interface_descriptor hidg_interface_desc = {
+	.bLength		= sizeof hidg_interface_desc,
+	.bDescriptorType	= USB_DT_INTERFACE,
+	/* .bInterfaceNumber	= DYNAMIC */
+	.bAlternateSetting	= 0,
+	/* .bNumEndpoints	= DYNAMIC (depends on use_out_ep) */
+	.bInterfaceClass	= USB_CLASS_HID,
+	/* .bInterfaceSubClass	= DYNAMIC */
+	/* .bInterfaceProtocol	= DYNAMIC */
+	/* .iInterface		= DYNAMIC */
+};
+
+static struct hid_descriptor hidg_desc = {
+	.bLength			= sizeof hidg_desc,
+	.bDescriptorType		= HID_DT_HID,
+	.bcdHID				= cpu_to_le16(0x0101),
+	.bCountryCode			= 0x00,
+	.bNumDescriptors		= 0x1,
+	/*.desc[0].bDescriptorType	= DYNAMIC */
+	/*.desc[0].wDescriptorLenght	= DYNAMIC */
+};
+
+/* Super-Speed Support */
+
+static struct usb_endpoint_descriptor hidg_ss_in_ep_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_XFER_INT,
+	/*.wMaxPacketSize	= DYNAMIC */
+	.bInterval		= 4, /* FIXME: Add this field in the
+				      * HID gadget configuration?
+				      * (struct hidg_func_descriptor)
+				      */
+};
+
+static struct usb_ss_ep_comp_descriptor hidg_ss_in_comp_desc = {
+	.bLength                = sizeof(hidg_ss_in_comp_desc),
+	.bDescriptorType        = USB_DT_SS_ENDPOINT_COMP,
+
+	/* .bMaxBurst           = 0, */
+	/* .bmAttributes        = 0, */
+	/* .wBytesPerInterval   = DYNAMIC */
+};
+
+static struct usb_endpoint_descriptor hidg_ss_out_ep_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_OUT,
+	.bmAttributes		= USB_ENDPOINT_XFER_INT,
+	/*.wMaxPacketSize	= DYNAMIC */
+	.bInterval		= 4, /* FIXME: Add this field in the
+				      * HID gadget configuration?
+				      * (struct hidg_func_descriptor)
+				      */
+};
+
+static struct usb_ss_ep_comp_descriptor hidg_ss_out_comp_desc = {
+	.bLength                = sizeof(hidg_ss_out_comp_desc),
+	.bDescriptorType        = USB_DT_SS_ENDPOINT_COMP,
+
+	/* .bMaxBurst           = 0, */
+	/* .bmAttributes        = 0, */
+	/* .wBytesPerInterval   = DYNAMIC */
+};
+
+static struct usb_descriptor_header *hidg_ss_descriptors_intout[] = {
+	(struct usb_descriptor_header *)&hidg_interface_desc,
+	(struct usb_descriptor_header *)&hidg_desc,
+	(struct usb_descriptor_header *)&hidg_ss_in_ep_desc,
+	(struct usb_descriptor_header *)&hidg_ss_in_comp_desc,
+	(struct usb_descriptor_header *)&hidg_ss_out_ep_desc,
+	(struct usb_descriptor_header *)&hidg_ss_out_comp_desc,
+	NULL,
+};
+
+static struct usb_descriptor_header *hidg_ss_descriptors_ssreport[] = {
+	(struct usb_descriptor_header *)&hidg_interface_desc,
+	(struct usb_descriptor_header *)&hidg_desc,
+	(struct usb_descriptor_header *)&hidg_ss_in_ep_desc,
+	(struct usb_descriptor_header *)&hidg_ss_in_comp_desc,
+	NULL,
+};
+
+/* High-Speed Support */
+
+static struct usb_endpoint_descriptor hidg_hs_in_ep_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_XFER_INT,
+	/*.wMaxPacketSize	= DYNAMIC */
+	.bInterval		= 4, /* FIXME: Add this field in the
+				      * HID gadget configuration?
+				      * (struct hidg_func_descriptor)
+				      */
+};
+
+static struct usb_endpoint_descriptor hidg_hs_out_ep_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_OUT,
+	.bmAttributes		= USB_ENDPOINT_XFER_INT,
+	/*.wMaxPacketSize	= DYNAMIC */
+	.bInterval		= 4, /* FIXME: Add this field in the
+				      * HID gadget configuration?
+				      * (struct hidg_func_descriptor)
+				      */
+};
+
+static struct usb_descriptor_header *hidg_hs_descriptors_intout[] = {
+	(struct usb_descriptor_header *)&hidg_interface_desc,
+	(struct usb_descriptor_header *)&hidg_desc,
+	(struct usb_descriptor_header *)&hidg_hs_in_ep_desc,
+	(struct usb_descriptor_header *)&hidg_hs_out_ep_desc,
+	NULL,
+};
+
+static struct usb_descriptor_header *hidg_hs_descriptors_ssreport[] = {
+	(struct usb_descriptor_header *)&hidg_interface_desc,
+	(struct usb_descriptor_header *)&hidg_desc,
+	(struct usb_descriptor_header *)&hidg_hs_in_ep_desc,
+	NULL,
+};
+
+/* Full-Speed Support */
+
+static struct usb_endpoint_descriptor hidg_fs_in_ep_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_XFER_INT,
+	/*.wMaxPacketSize	= DYNAMIC */
+	.bInterval		= 10, /* FIXME: Add this field in the
+				       * HID gadget configuration?
+				       * (struct hidg_func_descriptor)
+				       */
+};
+
+static struct usb_endpoint_descriptor hidg_fs_out_ep_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_OUT,
+	.bmAttributes		= USB_ENDPOINT_XFER_INT,
+	/*.wMaxPacketSize	= DYNAMIC */
+	.bInterval		= 10, /* FIXME: Add this field in the
+				       * HID gadget configuration?
+				       * (struct hidg_func_descriptor)
+				       */
+};
+
+static struct usb_descriptor_header *hidg_fs_descriptors_intout[] = {
+	(struct usb_descriptor_header *)&hidg_interface_desc,
+	(struct usb_descriptor_header *)&hidg_desc,
+	(struct usb_descriptor_header *)&hidg_fs_in_ep_desc,
+	(struct usb_descriptor_header *)&hidg_fs_out_ep_desc,
+	NULL,
+};
+
+static struct usb_descriptor_header *hidg_fs_descriptors_ssreport[] = {
+	(struct usb_descriptor_header *)&hidg_interface_desc,
+	(struct usb_descriptor_header *)&hidg_desc,
+	(struct usb_descriptor_header *)&hidg_fs_in_ep_desc,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+/*                                 Strings                                 */
+
+#define CT_FUNC_HID_IDX	0
+
+static struct usb_string ct_func_string_defs[] = {
+	[CT_FUNC_HID_IDX].s	= "HID Interface",
+	{},			/* end of list */
+};
+
+static struct usb_gadget_strings ct_func_string_table = {
+	.language	= 0x0409,	/* en-US */
+	.strings	= ct_func_string_defs,
+};
+
+static struct usb_gadget_strings *ct_func_strings[] = {
+	&ct_func_string_table,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+/*                              Char Device                                */
+
+static ssize_t f_hidg_intout_read(struct file *file, char __user *buffer,
+				  size_t count, loff_t *ptr)
+{
+	struct f_hidg *hidg = file->private_data;
+	struct f_hidg_req_list *list;
+	struct usb_request *req;
+	unsigned long flags;
+	int ret;
+
+	if (!count)
+		return 0;
+
+	spin_lock_irqsave(&hidg->read_spinlock, flags);
+
+#define READ_COND_INTOUT (!list_empty(&hidg->completed_out_req))
+
+	/* wait for at least one buffer to complete */
+	while (!READ_COND_INTOUT) {
+		spin_unlock_irqrestore(&hidg->read_spinlock, flags);
+		if (file->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		if (wait_event_interruptible(hidg->read_queue, READ_COND_INTOUT))
+			return -ERESTARTSYS;
+
+		spin_lock_irqsave(&hidg->read_spinlock, flags);
+	}
+
+	/* pick the first one */
+	list = list_first_entry(&hidg->completed_out_req,
+				struct f_hidg_req_list, list);
+
+	/*
+	 * Remove this from list to protect it from beign free()
+	 * while host disables our function
+	 */
+	list_del(&list->list);
+
+	req = list->req;
+	count = min_t(unsigned int, count, req->actual - list->pos);
+	spin_unlock_irqrestore(&hidg->read_spinlock, flags);
+
+	/* copy to user outside spinlock */
+	count -= copy_to_user(buffer, req->buf + list->pos, count);
+	list->pos += count;
+
+	/*
+	 * if this request is completely handled and transfered to
+	 * userspace, remove its entry from the list and requeue it
+	 * again. Otherwise, we will revisit it again upon the next
+	 * call, taking into account its current read position.
+	 */
+	if (list->pos == req->actual) {
+		kfree(list);
+
+		req->length = hidg->report_length;
+		ret = usb_ep_queue(hidg->out_ep, req, GFP_KERNEL);
+		if (ret < 0) {
+			free_ep_req(hidg->out_ep, req);
+			return ret;
+		}
+	} else {
+		spin_lock_irqsave(&hidg->read_spinlock, flags);
+		list_add(&list->list, &hidg->completed_out_req);
+		spin_unlock_irqrestore(&hidg->read_spinlock, flags);
+
+		wake_up(&hidg->read_queue);
+	}
+
+	return count;
+}
+
+#define READ_COND_SSREPORT (hidg->set_report_buf != NULL)
+
+static ssize_t f_hidg_ssreport_read(struct file *file, char __user *buffer,
+				    size_t count, loff_t *ptr)
+{
+	struct f_hidg *hidg = file->private_data;
+	char *tmp_buf = NULL;
+	unsigned long flags;
+
+	if (!count)
+		return 0;
+
+	spin_lock_irqsave(&hidg->read_spinlock, flags);
+
+	while (!READ_COND_SSREPORT) {
+		spin_unlock_irqrestore(&hidg->read_spinlock, flags);
+		if (file->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		if (wait_event_interruptible(hidg->read_queue, READ_COND_SSREPORT))
+			return -ERESTARTSYS;
+
+		spin_lock_irqsave(&hidg->read_spinlock, flags);
+	}
+
+	count = min_t(unsigned int, count, hidg->set_report_length);
+	tmp_buf = hidg->set_report_buf;
+	hidg->set_report_buf = NULL;
+
+	spin_unlock_irqrestore(&hidg->read_spinlock, flags);
+
+	if (tmp_buf != NULL) {
+		count -= copy_to_user(buffer, tmp_buf, count);
+		kfree(tmp_buf);
+	} else {
+		count = -ENOMEM;
+	}
+
+	wake_up(&hidg->read_queue);
+
+	return count;
+}
+
+static ssize_t f_hidg_read(struct file *file, char __user *buffer,
+			   size_t count, loff_t *ptr)
+{
+	struct f_hidg *hidg = file->private_data;
+
+	if (hidg->use_out_ep)
+		return f_hidg_intout_read(file, buffer, count, ptr);
+	else
+		return f_hidg_ssreport_read(file, buffer, count, ptr);
+}
+
+static void f_hidg_req_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_hidg *hidg = (struct f_hidg *)ep->driver_data;
+	unsigned long flags;
+
+	if (req->status != 0) {
+		ERROR(hidg->func.config->cdev,
+			"End Point Request ERROR: %d\n", req->status);
+	}
+
+	spin_lock_irqsave(&hidg->write_spinlock, flags);
+	hidg->write_pending = 0;
+	spin_unlock_irqrestore(&hidg->write_spinlock, flags);
+	wake_up(&hidg->write_queue);
+}
+
+static ssize_t f_hidg_write(struct file *file, const char __user *buffer,
+			    size_t count, loff_t *offp)
+{
+	struct f_hidg *hidg  = file->private_data;
+	struct usb_request *req;
+	unsigned long flags;
+	ssize_t status = -ENOMEM;
+
+	spin_lock_irqsave(&hidg->write_spinlock, flags);
+
+	if (!hidg->req) {
+		spin_unlock_irqrestore(&hidg->write_spinlock, flags);
+		return -ESHUTDOWN;
+	}
+
+#define WRITE_COND (!hidg->write_pending)
+try_again:
+	/* write queue */
+	while (!WRITE_COND) {
+		spin_unlock_irqrestore(&hidg->write_spinlock, flags);
+		if (file->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		if (wait_event_interruptible_exclusive(
+				hidg->write_queue, WRITE_COND))
+			return -ERESTARTSYS;
+
+		spin_lock_irqsave(&hidg->write_spinlock, flags);
+	}
+
+	hidg->write_pending = 1;
+	req = hidg->req;
+	count  = min_t(unsigned, count, hidg->report_length);
+
+	spin_unlock_irqrestore(&hidg->write_spinlock, flags);
+
+	if (!req) {
+		ERROR(hidg->func.config->cdev, "hidg->req is NULL\n");
+		status = -ESHUTDOWN;
+		goto release_write_pending;
+	}
+
+	status = copy_from_user(req->buf, buffer, count);
+	if (status != 0) {
+		ERROR(hidg->func.config->cdev,
+			"copy_from_user error\n");
+		status = -EINVAL;
+		goto release_write_pending;
+	}
+
+	spin_lock_irqsave(&hidg->write_spinlock, flags);
+
+	/* when our function has been disabled by host */
+	if (!hidg->req) {
+		free_ep_req(hidg->in_ep, req);
+		/*
+		 * TODO
+		 * Should we fail with error here?
+		 */
+		goto try_again;
+	}
+
+	req->status   = 0;
+	req->zero     = 0;
+	req->length   = count;
+	req->complete = f_hidg_req_complete;
+	req->context  = hidg;
+
+	spin_unlock_irqrestore(&hidg->write_spinlock, flags);
+
+	if (!hidg->in_ep->enabled) {
+		ERROR(hidg->func.config->cdev, "in_ep is disabled\n");
+		status = -ESHUTDOWN;
+		goto release_write_pending;
+	}
+
+	status = usb_ep_queue(hidg->in_ep, req, GFP_ATOMIC);
+	if (status < 0)
+		goto release_write_pending;
+	else
+		status = count;
+
+	return status;
+release_write_pending:
+	spin_lock_irqsave(&hidg->write_spinlock, flags);
+	hidg->write_pending = 0;
+	spin_unlock_irqrestore(&hidg->write_spinlock, flags);
+
+	wake_up(&hidg->write_queue);
+
+	return status;
+}
+
+static __poll_t f_hidg_poll(struct file *file, poll_table *wait)
+{
+	struct f_hidg	*hidg  = file->private_data;
+	__poll_t	ret = 0;
+
+	poll_wait(file, &hidg->read_queue, wait);
+	poll_wait(file, &hidg->write_queue, wait);
+
+	if (WRITE_COND)
+		ret |= EPOLLOUT | EPOLLWRNORM;
+
+	if (hidg->use_out_ep) {
+		if (READ_COND_INTOUT)
+			ret |= EPOLLIN | EPOLLRDNORM;
+	} else {
+		if (READ_COND_SSREPORT)
+			ret |= EPOLLIN | EPOLLRDNORM;
+	}
+
+	return ret;
+}
+
+#undef WRITE_COND
+#undef READ_COND_SSREPORT
+#undef READ_COND_INTOUT
+
+static int f_hidg_release(struct inode *inode, struct file *fd)
+{
+	fd->private_data = NULL;
+	return 0;
+}
+
+static int f_hidg_open(struct inode *inode, struct file *fd)
+{
+	struct f_hidg *hidg =
+		container_of(inode->i_cdev, struct f_hidg, cdev);
+
+	fd->private_data = hidg;
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+/*                                usb_function                             */
+
+static inline struct usb_request *hidg_alloc_ep_req(struct usb_ep *ep,
+						    unsigned length)
+{
+	return alloc_ep_req(ep, length);
+}
+
+static void hidg_intout_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_hidg *hidg = (struct f_hidg *) req->context;
+	struct usb_composite_dev *cdev = hidg->func.config->cdev;
+	struct f_hidg_req_list *req_list;
+	unsigned long flags;
+
+	switch (req->status) {
+	case 0:
+		req_list = kzalloc(sizeof(*req_list), GFP_ATOMIC);
+		if (!req_list) {
+			ERROR(cdev, "Unable to allocate mem for req_list\n");
+			goto free_req;
+		}
+
+		req_list->req = req;
+
+		spin_lock_irqsave(&hidg->read_spinlock, flags);
+		list_add_tail(&req_list->list, &hidg->completed_out_req);
+		spin_unlock_irqrestore(&hidg->read_spinlock, flags);
+
+		wake_up(&hidg->read_queue);
+		break;
+	default:
+		ERROR(cdev, "Set report failed %d\n", req->status);
+		fallthrough;
+	case -ECONNABORTED:		/* hardware forced ep reset */
+	case -ECONNRESET:		/* request dequeued */
+	case -ESHUTDOWN:		/* disconnect from host */
+free_req:
+		free_ep_req(ep, req);
+		return;
+	}
+}
+
+static void hidg_ssreport_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_hidg *hidg = (struct f_hidg *)req->context;
+	struct usb_composite_dev *cdev = hidg->func.config->cdev;
+	char *new_buf = NULL;
+	unsigned long flags;
+
+	if (req->status != 0 || req->buf == NULL || req->actual == 0) {
+		ERROR(cdev,
+		      "%s FAILED: status=%d, buf=%p, actual=%d\n",
+		      __func__, req->status, req->buf, req->actual);
+		return;
+	}
+
+	spin_lock_irqsave(&hidg->read_spinlock, flags);
+
+	new_buf = krealloc(hidg->set_report_buf, req->actual, GFP_ATOMIC);
+	if (new_buf == NULL) {
+		spin_unlock_irqrestore(&hidg->read_spinlock, flags);
+		return;
+	}
+	hidg->set_report_buf = new_buf;
+
+	hidg->set_report_length = req->actual;
+	memcpy(hidg->set_report_buf, req->buf, req->actual);
+
+	spin_unlock_irqrestore(&hidg->read_spinlock, flags);
+
+	wake_up(&hidg->read_queue);
+}
+
+static int hidg_setup(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct f_hidg			*hidg = func_to_hidg(f);
+	struct usb_composite_dev	*cdev = f->config->cdev;
+	struct usb_request		*req  = cdev->req;
+	int status = 0;
+	__u16 value, length;
+
+	value	= __le16_to_cpu(ctrl->wValue);
+	length	= __le16_to_cpu(ctrl->wLength);
+
+	VDBG(cdev,
+	     "%s crtl_request : bRequestType:0x%x bRequest:0x%x Value:0x%x\n",
+	     __func__, ctrl->bRequestType, ctrl->bRequest, value);
+
+	switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
+		  | HID_REQ_GET_REPORT):
+		VDBG(cdev, "get_report\n");
+
+		/* send an empty report */
+		length = min_t(unsigned, length, hidg->report_length);
+		memset(req->buf, 0x0, length);
+
+		goto respond;
+		break;
+
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
+		  | HID_REQ_GET_PROTOCOL):
+		VDBG(cdev, "get_protocol\n");
+		length = min_t(unsigned int, length, 1);
+		((u8 *) req->buf)[0] = hidg->protocol;
+		goto respond;
+		break;
+
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
+		  | HID_REQ_GET_IDLE):
+		VDBG(cdev, "get_idle\n");
+		length = min_t(unsigned int, length, 1);
+		((u8 *) req->buf)[0] = hidg->idle;
+		goto respond;
+		break;
+
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
+		  | HID_REQ_SET_REPORT):
+		VDBG(cdev, "set_report | wLength=%d\n", ctrl->wLength);
+		if (hidg->use_out_ep)
+			goto stall;
+		req->complete = hidg_ssreport_complete;
+		req->context  = hidg;
+		goto respond;
+		break;
+
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
+		  | HID_REQ_SET_PROTOCOL):
+		VDBG(cdev, "set_protocol\n");
+		if (value > HID_REPORT_PROTOCOL)
+			goto stall;
+		length = 0;
+		/*
+		 * We assume that programs implementing the Boot protocol
+		 * are also compatible with the Report Protocol
+		 */
+		if (hidg->bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT) {
+			hidg->protocol = value;
+			goto respond;
+		}
+		goto stall;
+		break;
+
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
+		  | HID_REQ_SET_IDLE):
+		VDBG(cdev, "set_idle\n");
+		length = 0;
+		hidg->idle = value >> 8;
+		goto respond;
+		break;
+
+	case ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8
+		  | USB_REQ_GET_DESCRIPTOR):
+		switch (value >> 8) {
+		case HID_DT_HID:
+		{
+			struct hid_descriptor hidg_desc_copy = hidg_desc;
+
+			VDBG(cdev, "USB_REQ_GET_DESCRIPTOR: HID\n");
+			hidg_desc_copy.desc[0].bDescriptorType = HID_DT_REPORT;
+			hidg_desc_copy.desc[0].wDescriptorLength =
+				cpu_to_le16(hidg->report_desc_length);
+
+			length = min_t(unsigned short, length,
+						   hidg_desc_copy.bLength);
+			memcpy(req->buf, &hidg_desc_copy, length);
+			goto respond;
+			break;
+		}
+		case HID_DT_REPORT:
+			VDBG(cdev, "USB_REQ_GET_DESCRIPTOR: REPORT\n");
+			length = min_t(unsigned short, length,
+						   hidg->report_desc_length);
+			memcpy(req->buf, hidg->report_desc, length);
+			goto respond;
+			break;
+
+		default:
+			VDBG(cdev, "Unknown descriptor request 0x%x\n",
+				 value >> 8);
+			goto stall;
+			break;
+		}
+		break;
+
+	default:
+		VDBG(cdev, "Unknown request 0x%x\n",
+			 ctrl->bRequest);
+		goto stall;
+		break;
+	}
+
+stall:
+	return -EOPNOTSUPP;
+
+respond:
+	req->zero = 0;
+	req->length = length;
+	status = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+	if (status < 0)
+		ERROR(cdev, "usb_ep_queue error on ep0 %d\n", value);
+	return status;
+}
+
+static void hidg_disable(struct usb_function *f)
+{
+	struct f_hidg *hidg = func_to_hidg(f);
+	struct f_hidg_req_list *list, *next;
+	unsigned long flags;
+
+	usb_ep_disable(hidg->in_ep);
+
+	if (hidg->out_ep) {
+		usb_ep_disable(hidg->out_ep);
+
+		spin_lock_irqsave(&hidg->read_spinlock, flags);
+		list_for_each_entry_safe(list, next, &hidg->completed_out_req, list) {
+			free_ep_req(hidg->out_ep, list->req);
+			list_del(&list->list);
+			kfree(list);
+		}
+		spin_unlock_irqrestore(&hidg->read_spinlock, flags);
+	}
+
+	spin_lock_irqsave(&hidg->write_spinlock, flags);
+	if (!hidg->write_pending) {
+		free_ep_req(hidg->in_ep, hidg->req);
+		hidg->write_pending = 1;
+	}
+
+	hidg->req = NULL;
+	spin_unlock_irqrestore(&hidg->write_spinlock, flags);
+}
+
+static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct usb_composite_dev		*cdev = f->config->cdev;
+	struct f_hidg				*hidg = func_to_hidg(f);
+	struct usb_request			*req_in = NULL;
+	unsigned long				flags;
+	int i, status = 0;
+
+	VDBG(cdev, "hidg_set_alt intf:%d alt:%d\n", intf, alt);
+
+	if (hidg->in_ep != NULL) {
+		/* restart endpoint */
+		usb_ep_disable(hidg->in_ep);
+
+		status = config_ep_by_speed(f->config->cdev->gadget, f,
+					    hidg->in_ep);
+		if (status) {
+			ERROR(cdev, "config_ep_by_speed FAILED!\n");
+			goto fail;
+		}
+		status = usb_ep_enable(hidg->in_ep);
+		if (status < 0) {
+			ERROR(cdev, "Enable IN endpoint FAILED!\n");
+			goto fail;
+		}
+		hidg->in_ep->driver_data = hidg;
+
+		req_in = hidg_alloc_ep_req(hidg->in_ep, hidg->report_length);
+		if (!req_in) {
+			status = -ENOMEM;
+			goto disable_ep_in;
+		}
+	}
+
+	if (hidg->use_out_ep && hidg->out_ep != NULL) {
+		/* restart endpoint */
+		usb_ep_disable(hidg->out_ep);
+
+		status = config_ep_by_speed(f->config->cdev->gadget, f,
+					    hidg->out_ep);
+		if (status) {
+			ERROR(cdev, "config_ep_by_speed FAILED!\n");
+			goto free_req_in;
+		}
+		status = usb_ep_enable(hidg->out_ep);
+		if (status < 0) {
+			ERROR(cdev, "Enable OUT endpoint FAILED!\n");
+			goto free_req_in;
+		}
+		hidg->out_ep->driver_data = hidg;
+
+		/*
+		 * allocate a bunch of read buffers and queue them all at once.
+		 */
+		for (i = 0; i < hidg->qlen && status == 0; i++) {
+			struct usb_request *req =
+					hidg_alloc_ep_req(hidg->out_ep,
+							  hidg->report_length);
+			if (req) {
+				req->complete = hidg_intout_complete;
+				req->context  = hidg;
+				status = usb_ep_queue(hidg->out_ep, req,
+						      GFP_ATOMIC);
+				if (status) {
+					ERROR(cdev, "%s queue req --> %d\n",
+						hidg->out_ep->name, status);
+					free_ep_req(hidg->out_ep, req);
+				}
+			} else {
+				status = -ENOMEM;
+				goto disable_out_ep;
+			}
+		}
+	}
+
+	if (hidg->in_ep != NULL) {
+		spin_lock_irqsave(&hidg->write_spinlock, flags);
+		hidg->req = req_in;
+		hidg->write_pending = 0;
+		spin_unlock_irqrestore(&hidg->write_spinlock, flags);
+
+		wake_up(&hidg->write_queue);
+	}
+	return 0;
+disable_out_ep:
+	if (hidg->out_ep)
+		usb_ep_disable(hidg->out_ep);
+free_req_in:
+	if (req_in)
+		free_ep_req(hidg->in_ep, req_in);
+
+disable_ep_in:
+	if (hidg->in_ep)
+		usb_ep_disable(hidg->in_ep);
+
+fail:
+	return status;
+}
+
+static const struct file_operations f_hidg_fops = {
+	.owner		= THIS_MODULE,
+	.open		= f_hidg_open,
+	.release	= f_hidg_release,
+	.write		= f_hidg_write,
+	.read		= f_hidg_read,
+	.poll		= f_hidg_poll,
+	.llseek		= noop_llseek,
+};
+
+static int hidg_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_ep		*ep;
+	struct f_hidg		*hidg = func_to_hidg(f);
+	struct usb_string	*us;
+	int			status;
+
+	/* maybe allocate device-global string IDs, and patch descriptors */
+	us = usb_gstrings_attach(c->cdev, ct_func_strings,
+				 ARRAY_SIZE(ct_func_string_defs));
+	if (IS_ERR(us))
+		return PTR_ERR(us);
+	hidg_interface_desc.iInterface = us[CT_FUNC_HID_IDX].id;
+
+	/* allocate instance-specific interface IDs, and patch descriptors */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	hidg_interface_desc.bInterfaceNumber = status;
+
+	/* allocate instance-specific endpoints */
+	status = -ENODEV;
+	ep = usb_ep_autoconfig(c->cdev->gadget, &hidg_fs_in_ep_desc);
+	if (!ep)
+		goto fail;
+	hidg->in_ep = ep;
+
+	hidg->out_ep = NULL;
+	if (hidg->use_out_ep) {
+		ep = usb_ep_autoconfig(c->cdev->gadget, &hidg_fs_out_ep_desc);
+		if (!ep)
+			goto fail;
+		hidg->out_ep = ep;
+	}
+
+	/* used only if use_out_ep == 1 */
+	hidg->set_report_buf = NULL;
+
+	/* set descriptor dynamic values */
+	hidg_interface_desc.bInterfaceSubClass = hidg->bInterfaceSubClass;
+	hidg_interface_desc.bInterfaceProtocol = hidg->bInterfaceProtocol;
+	hidg_interface_desc.bNumEndpoints = hidg->use_out_ep ? 2 : 1;
+	hidg->protocol = HID_REPORT_PROTOCOL;
+	hidg->idle = 1;
+	hidg_ss_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
+	hidg_ss_in_comp_desc.wBytesPerInterval =
+				cpu_to_le16(hidg->report_length);
+	hidg_hs_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
+	hidg_fs_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
+	hidg_ss_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
+	hidg_ss_out_comp_desc.wBytesPerInterval =
+				cpu_to_le16(hidg->report_length);
+	hidg_hs_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
+	hidg_fs_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
+	/*
+	 * We can use hidg_desc struct here but we should not relay
+	 * that its content won't change after returning from this function.
+	 */
+	hidg_desc.desc[0].bDescriptorType = HID_DT_REPORT;
+	hidg_desc.desc[0].wDescriptorLength =
+		cpu_to_le16(hidg->report_desc_length);
+
+	hidg_hs_in_ep_desc.bEndpointAddress =
+		hidg_fs_in_ep_desc.bEndpointAddress;
+	hidg_hs_out_ep_desc.bEndpointAddress =
+		hidg_fs_out_ep_desc.bEndpointAddress;
+
+	hidg_ss_in_ep_desc.bEndpointAddress =
+		hidg_fs_in_ep_desc.bEndpointAddress;
+	hidg_ss_out_ep_desc.bEndpointAddress =
+		hidg_fs_out_ep_desc.bEndpointAddress;
+
+	if (hidg->use_out_ep)
+		status = usb_assign_descriptors(f,
+			hidg_fs_descriptors_intout,
+			hidg_hs_descriptors_intout,
+			hidg_ss_descriptors_intout,
+			hidg_ss_descriptors_intout);
+	else
+		status = usb_assign_descriptors(f,
+			hidg_fs_descriptors_ssreport,
+			hidg_hs_descriptors_ssreport,
+			hidg_ss_descriptors_ssreport,
+			hidg_ss_descriptors_ssreport);
+
+	if (status)
+		goto fail;
+
+	spin_lock_init(&hidg->write_spinlock);
+	hidg->write_pending = 1;
+	hidg->req = NULL;
+	spin_lock_init(&hidg->read_spinlock);
+	init_waitqueue_head(&hidg->write_queue);
+	init_waitqueue_head(&hidg->read_queue);
+	INIT_LIST_HEAD(&hidg->completed_out_req);
+
+	/* create char device */
+	cdev_init(&hidg->cdev, &f_hidg_fops);
+	status = cdev_device_add(&hidg->cdev, &hidg->dev);
+	if (status)
+		goto fail_free_descs;
+
+	return 0;
+fail_free_descs:
+	usb_free_all_descriptors(f);
+fail:
+	ERROR(f->config->cdev, "hidg_bind FAILED\n");
+	if (hidg->req != NULL)
+		free_ep_req(hidg->in_ep, hidg->req);
+
+	return status;
+}
+
+static inline int hidg_get_minor(void)
+{
+	int ret;
+
+	ret = ida_simple_get(&hidg_ida, 0, 0, GFP_KERNEL);
+	if (ret >= HIDG_MINORS) {
+		ida_simple_remove(&hidg_ida, ret);
+		ret = -ENODEV;
+	}
+
+	return ret;
+}
+
+static inline struct f_hid_opts *to_f_hid_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_hid_opts,
+			    func_inst.group);
+}
+
+static void hid_attr_release(struct config_item *item)
+{
+	struct f_hid_opts *opts = to_f_hid_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations hidg_item_ops = {
+	.release	= hid_attr_release,
+};
+
+#define F_HID_OPT(name, prec, limit)					\
+static ssize_t f_hid_opts_##name##_show(struct config_item *item, char *page)\
+{									\
+	struct f_hid_opts *opts = to_f_hid_opts(item);			\
+	int result;							\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%d\n", opts->name);			\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t f_hid_opts_##name##_store(struct config_item *item,	\
+					 const char *page, size_t len)	\
+{									\
+	struct f_hid_opts *opts = to_f_hid_opts(item);			\
+	int ret;							\
+	u##prec num;							\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt) {						\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	ret = kstrtou##prec(page, 0, &num);				\
+	if (ret)							\
+		goto end;						\
+									\
+	if (num > limit) {						\
+		ret = -EINVAL;						\
+		goto end;						\
+	}								\
+	opts->name = num;						\
+	ret = len;							\
+									\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+CONFIGFS_ATTR(f_hid_opts_, name)
+
+F_HID_OPT(subclass, 8, 255);
+F_HID_OPT(protocol, 8, 255);
+F_HID_OPT(no_out_endpoint, 8, 1);
+F_HID_OPT(report_length, 16, 65535);
+
+static ssize_t f_hid_opts_report_desc_show(struct config_item *item, char *page)
+{
+	struct f_hid_opts *opts = to_f_hid_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = opts->report_desc_length;
+	memcpy(page, opts->report_desc, opts->report_desc_length);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_hid_opts_report_desc_store(struct config_item *item,
+					    const char *page, size_t len)
+{
+	struct f_hid_opts *opts = to_f_hid_opts(item);
+	int ret = -EBUSY;
+	char *d;
+
+	mutex_lock(&opts->lock);
+
+	if (opts->refcnt)
+		goto end;
+	if (len > PAGE_SIZE) {
+		ret = -ENOSPC;
+		goto end;
+	}
+	d = kmemdup(page, len, GFP_KERNEL);
+	if (!d) {
+		ret = -ENOMEM;
+		goto end;
+	}
+	kfree(opts->report_desc);
+	opts->report_desc = d;
+	opts->report_desc_length = len;
+	opts->report_desc_alloc = true;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+CONFIGFS_ATTR(f_hid_opts_, report_desc);
+
+static ssize_t f_hid_opts_dev_show(struct config_item *item, char *page)
+{
+	struct f_hid_opts *opts = to_f_hid_opts(item);
+
+	return sprintf(page, "%d:%d\n", major, opts->minor);
+}
+
+CONFIGFS_ATTR_RO(f_hid_opts_, dev);
+
+static struct configfs_attribute *hid_attrs[] = {
+	&f_hid_opts_attr_subclass,
+	&f_hid_opts_attr_protocol,
+	&f_hid_opts_attr_no_out_endpoint,
+	&f_hid_opts_attr_report_length,
+	&f_hid_opts_attr_report_desc,
+	&f_hid_opts_attr_dev,
+	NULL,
+};
+
+static const struct config_item_type hid_func_type = {
+	.ct_item_ops	= &hidg_item_ops,
+	.ct_attrs	= hid_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static inline void hidg_put_minor(int minor)
+{
+	ida_simple_remove(&hidg_ida, minor);
+}
+
+static void hidg_free_inst(struct usb_function_instance *f)
+{
+	struct f_hid_opts *opts;
+
+	opts = container_of(f, struct f_hid_opts, func_inst);
+
+	mutex_lock(&hidg_ida_lock);
+
+	hidg_put_minor(opts->minor);
+	if (ida_is_empty(&hidg_ida))
+		ghid_cleanup();
+
+	mutex_unlock(&hidg_ida_lock);
+
+	if (opts->report_desc_alloc)
+		kfree(opts->report_desc);
+
+	kfree(opts);
+}
+
+static struct usb_function_instance *hidg_alloc_inst(void)
+{
+	struct f_hid_opts *opts;
+	struct usb_function_instance *ret;
+	int status = 0;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+	mutex_init(&opts->lock);
+	opts->func_inst.free_func_inst = hidg_free_inst;
+	ret = &opts->func_inst;
+
+	mutex_lock(&hidg_ida_lock);
+
+	if (ida_is_empty(&hidg_ida)) {
+		status = ghid_setup(NULL, HIDG_MINORS);
+		if (status)  {
+			ret = ERR_PTR(status);
+			kfree(opts);
+			goto unlock;
+		}
+	}
+
+	opts->minor = hidg_get_minor();
+	if (opts->minor < 0) {
+		ret = ERR_PTR(opts->minor);
+		kfree(opts);
+		if (ida_is_empty(&hidg_ida))
+			ghid_cleanup();
+		goto unlock;
+	}
+	config_group_init_type_name(&opts->func_inst.group, "", &hid_func_type);
+
+unlock:
+	mutex_unlock(&hidg_ida_lock);
+	return ret;
+}
+
+static void hidg_free(struct usb_function *f)
+{
+	struct f_hidg *hidg;
+	struct f_hid_opts *opts;
+
+	hidg = func_to_hidg(f);
+	opts = container_of(f->fi, struct f_hid_opts, func_inst);
+	put_device(&hidg->dev);
+	mutex_lock(&opts->lock);
+	--opts->refcnt;
+	mutex_unlock(&opts->lock);
+}
+
+static void hidg_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_hidg *hidg = func_to_hidg(f);
+
+	cdev_device_del(&hidg->cdev, &hidg->dev);
+
+	usb_free_all_descriptors(f);
+}
+
+static struct usb_function *hidg_alloc(struct usb_function_instance *fi)
+{
+	struct f_hidg *hidg;
+	struct f_hid_opts *opts;
+	int ret;
+
+	/* allocate and initialize one new instance */
+	hidg = kzalloc(sizeof(*hidg), GFP_KERNEL);
+	if (!hidg)
+		return ERR_PTR(-ENOMEM);
+
+	opts = container_of(fi, struct f_hid_opts, func_inst);
+
+	mutex_lock(&opts->lock);
+	++opts->refcnt;
+
+	device_initialize(&hidg->dev);
+	hidg->dev.release = hidg_release;
+	hidg->dev.class = hidg_class;
+	hidg->dev.devt = MKDEV(major, opts->minor);
+	ret = dev_set_name(&hidg->dev, "hidg%d", opts->minor);
+	if (ret) {
+		--opts->refcnt;
+		mutex_unlock(&opts->lock);
+		return ERR_PTR(ret);
+	}
+
+	hidg->bInterfaceSubClass = opts->subclass;
+	hidg->bInterfaceProtocol = opts->protocol;
+	hidg->report_length = opts->report_length;
+	hidg->report_desc_length = opts->report_desc_length;
+	if (opts->report_desc) {
+		hidg->report_desc = kmemdup(opts->report_desc,
+					    opts->report_desc_length,
+					    GFP_KERNEL);
+		if (!hidg->report_desc) {
+			put_device(&hidg->dev);
+			--opts->refcnt;
+			mutex_unlock(&opts->lock);
+			return ERR_PTR(-ENOMEM);
+		}
+	}
+	hidg->use_out_ep = !opts->no_out_endpoint;
+
+	mutex_unlock(&opts->lock);
+
+	hidg->func.name    = "hid";
+	hidg->func.bind    = hidg_bind;
+	hidg->func.unbind  = hidg_unbind;
+	hidg->func.set_alt = hidg_set_alt;
+	hidg->func.disable = hidg_disable;
+	hidg->func.setup   = hidg_setup;
+	hidg->func.free_func = hidg_free;
+
+	/* this could be made configurable at some point */
+	hidg->qlen	   = 4;
+
+	return &hidg->func;
+}
+
+DECLARE_USB_FUNCTION_INIT(hid, hidg_alloc_inst, hidg_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Fabien Chouteau");
+
+int ghid_setup(struct usb_gadget *g, int count)
+{
+	int status;
+	dev_t dev;
+
+	hidg_class = class_create(THIS_MODULE, "hidg");
+	if (IS_ERR(hidg_class)) {
+		status = PTR_ERR(hidg_class);
+		hidg_class = NULL;
+		return status;
+	}
+
+	status = alloc_chrdev_region(&dev, 0, count, "hidg");
+	if (status) {
+		class_destroy(hidg_class);
+		hidg_class = NULL;
+		return status;
+	}
+
+	major = MAJOR(dev);
+	minors = count;
+
+	return 0;
+}
+
+void ghid_cleanup(void)
+{
+	if (major) {
+		unregister_chrdev_region(MKDEV(major, 0), minors);
+		major = minors = 0;
+	}
+
+	class_destroy(hidg_class);
+	hidg_class = NULL;
+}
diff --git a/drivers/usb/gadget/function/f_loopback.c b/drivers/usb/gadget/function/f_loopback.c
new file mode 100644
index 000000000..ae41f556e
--- /dev/null
+++ b/drivers/usb/gadget/function/f_loopback.c
@@ -0,0 +1,598 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_loopback.c - USB peripheral loopback configuration driver
+ *
+ * Copyright (C) 2003-2008 David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/usb/composite.h>
+
+#include "g_zero.h"
+#include "u_f.h"
+
+/*
+ * LOOPBACK FUNCTION ... a testing vehicle for USB peripherals,
+ *
+ * This takes messages of various sizes written OUT to a device, and loops
+ * them back so they can be read IN from it.  It has been used by certain
+ * test applications.  It supports limited testing of data queueing logic.
+ */
+struct f_loopback {
+	struct usb_function	function;
+
+	struct usb_ep		*in_ep;
+	struct usb_ep		*out_ep;
+
+	unsigned                qlen;
+	unsigned                buflen;
+};
+
+static inline struct f_loopback *func_to_loop(struct usb_function *f)
+{
+	return container_of(f, struct f_loopback, function);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_interface_descriptor loopback_intf = {
+	.bLength =		sizeof(loopback_intf),
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_VENDOR_SPEC,
+	/* .iInterface = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor fs_loop_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor fs_loop_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *fs_loopback_descs[] = {
+	(struct usb_descriptor_header *) &loopback_intf,
+	(struct usb_descriptor_header *) &fs_loop_sink_desc,
+	(struct usb_descriptor_header *) &fs_loop_source_desc,
+	NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor hs_loop_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor hs_loop_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *hs_loopback_descs[] = {
+	(struct usb_descriptor_header *) &loopback_intf,
+	(struct usb_descriptor_header *) &hs_loop_source_desc,
+	(struct usb_descriptor_header *) &hs_loop_sink_desc,
+	NULL,
+};
+
+/* super speed support: */
+
+static struct usb_endpoint_descriptor ss_loop_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_loop_source_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	0,
+};
+
+static struct usb_endpoint_descriptor ss_loop_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_loop_sink_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	0,
+};
+
+static struct usb_descriptor_header *ss_loopback_descs[] = {
+	(struct usb_descriptor_header *) &loopback_intf,
+	(struct usb_descriptor_header *) &ss_loop_source_desc,
+	(struct usb_descriptor_header *) &ss_loop_source_comp_desc,
+	(struct usb_descriptor_header *) &ss_loop_sink_desc,
+	(struct usb_descriptor_header *) &ss_loop_sink_comp_desc,
+	NULL,
+};
+
+/* function-specific strings: */
+
+static struct usb_string strings_loopback[] = {
+	[0].s = "loop input to output",
+	{  }			/* end of list */
+};
+
+static struct usb_gadget_strings stringtab_loop = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_loopback,
+};
+
+static struct usb_gadget_strings *loopback_strings[] = {
+	&stringtab_loop,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int loopback_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_loopback	*loop = func_to_loop(f);
+	int			id;
+	int ret;
+
+	/* allocate interface ID(s) */
+	id = usb_interface_id(c, f);
+	if (id < 0)
+		return id;
+	loopback_intf.bInterfaceNumber = id;
+
+	id = usb_string_id(cdev);
+	if (id < 0)
+		return id;
+	strings_loopback[0].id = id;
+	loopback_intf.iInterface = id;
+
+	/* allocate endpoints */
+
+	loop->in_ep = usb_ep_autoconfig(cdev->gadget, &fs_loop_source_desc);
+	if (!loop->in_ep) {
+autoconf_fail:
+		ERROR(cdev, "%s: can't autoconfigure on %s\n",
+			f->name, cdev->gadget->name);
+		return -ENODEV;
+	}
+
+	loop->out_ep = usb_ep_autoconfig(cdev->gadget, &fs_loop_sink_desc);
+	if (!loop->out_ep)
+		goto autoconf_fail;
+
+	/* support high speed hardware */
+	hs_loop_source_desc.bEndpointAddress =
+		fs_loop_source_desc.bEndpointAddress;
+	hs_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress;
+
+	/* support super speed hardware */
+	ss_loop_source_desc.bEndpointAddress =
+		fs_loop_source_desc.bEndpointAddress;
+	ss_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress;
+
+	ret = usb_assign_descriptors(f, fs_loopback_descs, hs_loopback_descs,
+			ss_loopback_descs, ss_loopback_descs);
+	if (ret)
+		return ret;
+
+	DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n",
+	    (gadget_is_superspeed(c->cdev->gadget) ? "super" :
+	     (gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full")),
+			f->name, loop->in_ep->name, loop->out_ep->name);
+	return 0;
+}
+
+static void lb_free_func(struct usb_function *f)
+{
+	struct f_lb_opts *opts;
+
+	opts = container_of(f->fi, struct f_lb_opts, func_inst);
+
+	mutex_lock(&opts->lock);
+	opts->refcnt--;
+	mutex_unlock(&opts->lock);
+
+	usb_free_all_descriptors(f);
+	kfree(func_to_loop(f));
+}
+
+static void loopback_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_loopback	*loop = ep->driver_data;
+	struct usb_composite_dev *cdev = loop->function.config->cdev;
+	int			status = req->status;
+
+	switch (status) {
+	case 0:				/* normal completion? */
+		if (ep == loop->out_ep) {
+			/*
+			 * We received some data from the host so let's
+			 * queue it so host can read the from our in ep
+			 */
+			struct usb_request *in_req = req->context;
+
+			in_req->zero = (req->actual < req->length);
+			in_req->length = req->actual;
+			ep = loop->in_ep;
+			req = in_req;
+		} else {
+			/*
+			 * We have just looped back a bunch of data
+			 * to host. Now let's wait for some more data.
+			 */
+			req = req->context;
+			ep = loop->out_ep;
+		}
+
+		/* queue the buffer back to host or for next bunch of data */
+		status = usb_ep_queue(ep, req, GFP_ATOMIC);
+		if (status == 0) {
+			return;
+		} else {
+			ERROR(cdev, "Unable to loop back buffer to %s: %d\n",
+			      ep->name, status);
+			goto free_req;
+		}
+
+		/* "should never get here" */
+	default:
+		ERROR(cdev, "%s loop complete --> %d, %d/%d\n", ep->name,
+				status, req->actual, req->length);
+		fallthrough;
+
+	/* NOTE:  since this driver doesn't maintain an explicit record
+	 * of requests it submitted (just maintains qlen count), we
+	 * rely on the hardware driver to clean up on disconnect or
+	 * endpoint disable.
+	 */
+	case -ECONNABORTED:		/* hardware forced ep reset */
+	case -ECONNRESET:		/* request dequeued */
+	case -ESHUTDOWN:		/* disconnect from host */
+free_req:
+		usb_ep_free_request(ep == loop->in_ep ?
+				    loop->out_ep : loop->in_ep,
+				    req->context);
+		free_ep_req(ep, req);
+		return;
+	}
+}
+
+static void disable_loopback(struct f_loopback *loop)
+{
+	struct usb_composite_dev	*cdev;
+
+	cdev = loop->function.config->cdev;
+	disable_endpoints(cdev, loop->in_ep, loop->out_ep, NULL, NULL);
+	VDBG(cdev, "%s disabled\n", loop->function.name);
+}
+
+static inline struct usb_request *lb_alloc_ep_req(struct usb_ep *ep, int len)
+{
+	return alloc_ep_req(ep, len);
+}
+
+static int alloc_requests(struct usb_composite_dev *cdev,
+			  struct f_loopback *loop)
+{
+	struct usb_request *in_req, *out_req;
+	int i;
+	int result = 0;
+
+	/*
+	 * allocate a bunch of read buffers and queue them all at once.
+	 * we buffer at most 'qlen' transfers; We allocate buffers only
+	 * for out transfer and reuse them in IN transfers to implement
+	 * our loopback functionality
+	 */
+	for (i = 0; i < loop->qlen && result == 0; i++) {
+		result = -ENOMEM;
+
+		in_req = usb_ep_alloc_request(loop->in_ep, GFP_ATOMIC);
+		if (!in_req)
+			goto fail;
+
+		out_req = lb_alloc_ep_req(loop->out_ep, loop->buflen);
+		if (!out_req)
+			goto fail_in;
+
+		in_req->complete = loopback_complete;
+		out_req->complete = loopback_complete;
+
+		in_req->buf = out_req->buf;
+		/* length will be set in complete routine */
+		in_req->context = out_req;
+		out_req->context = in_req;
+
+		result = usb_ep_queue(loop->out_ep, out_req, GFP_ATOMIC);
+		if (result) {
+			ERROR(cdev, "%s queue req --> %d\n",
+					loop->out_ep->name, result);
+			goto fail_out;
+		}
+	}
+
+	return 0;
+
+fail_out:
+	free_ep_req(loop->out_ep, out_req);
+fail_in:
+	usb_ep_free_request(loop->in_ep, in_req);
+fail:
+	return result;
+}
+
+static int enable_endpoint(struct usb_composite_dev *cdev,
+			   struct f_loopback *loop, struct usb_ep *ep)
+{
+	int					result;
+
+	result = config_ep_by_speed(cdev->gadget, &(loop->function), ep);
+	if (result)
+		goto out;
+
+	result = usb_ep_enable(ep);
+	if (result < 0)
+		goto out;
+	ep->driver_data = loop;
+	result = 0;
+
+out:
+	return result;
+}
+
+static int
+enable_loopback(struct usb_composite_dev *cdev, struct f_loopback *loop)
+{
+	int					result = 0;
+
+	result = enable_endpoint(cdev, loop, loop->in_ep);
+	if (result)
+		goto out;
+
+	result = enable_endpoint(cdev, loop, loop->out_ep);
+	if (result)
+		goto disable_in;
+
+	result = alloc_requests(cdev, loop);
+	if (result)
+		goto disable_out;
+
+	DBG(cdev, "%s enabled\n", loop->function.name);
+	return 0;
+
+disable_out:
+	usb_ep_disable(loop->out_ep);
+disable_in:
+	usb_ep_disable(loop->in_ep);
+out:
+	return result;
+}
+
+static int loopback_set_alt(struct usb_function *f,
+		unsigned intf, unsigned alt)
+{
+	struct f_loopback	*loop = func_to_loop(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	/* we know alt is zero */
+	disable_loopback(loop);
+	return enable_loopback(cdev, loop);
+}
+
+static void loopback_disable(struct usb_function *f)
+{
+	struct f_loopback	*loop = func_to_loop(f);
+
+	disable_loopback(loop);
+}
+
+static struct usb_function *loopback_alloc(struct usb_function_instance *fi)
+{
+	struct f_loopback	*loop;
+	struct f_lb_opts	*lb_opts;
+
+	loop = kzalloc(sizeof *loop, GFP_KERNEL);
+	if (!loop)
+		return ERR_PTR(-ENOMEM);
+
+	lb_opts = container_of(fi, struct f_lb_opts, func_inst);
+
+	mutex_lock(&lb_opts->lock);
+	lb_opts->refcnt++;
+	mutex_unlock(&lb_opts->lock);
+
+	loop->buflen = lb_opts->bulk_buflen;
+	loop->qlen = lb_opts->qlen;
+	if (!loop->qlen)
+		loop->qlen = 32;
+
+	loop->function.name = "loopback";
+	loop->function.bind = loopback_bind;
+	loop->function.set_alt = loopback_set_alt;
+	loop->function.disable = loopback_disable;
+	loop->function.strings = loopback_strings;
+
+	loop->function.free_func = lb_free_func;
+
+	return &loop->function;
+}
+
+static inline struct f_lb_opts *to_f_lb_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_lb_opts,
+			    func_inst.group);
+}
+
+static void lb_attr_release(struct config_item *item)
+{
+	struct f_lb_opts *lb_opts = to_f_lb_opts(item);
+
+	usb_put_function_instance(&lb_opts->func_inst);
+}
+
+static struct configfs_item_operations lb_item_ops = {
+	.release		= lb_attr_release,
+};
+
+static ssize_t f_lb_opts_qlen_show(struct config_item *item, char *page)
+{
+	struct f_lb_opts *opts = to_f_lb_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d\n", opts->qlen);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_lb_opts_qlen_store(struct config_item *item,
+				    const char *page, size_t len)
+{
+	struct f_lb_opts *opts = to_f_lb_opts(item);
+	int ret;
+	u32 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou32(page, 0, &num);
+	if (ret)
+		goto end;
+
+	opts->qlen = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+CONFIGFS_ATTR(f_lb_opts_, qlen);
+
+static ssize_t f_lb_opts_bulk_buflen_show(struct config_item *item, char *page)
+{
+	struct f_lb_opts *opts = to_f_lb_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d\n", opts->bulk_buflen);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_lb_opts_bulk_buflen_store(struct config_item *item,
+				    const char *page, size_t len)
+{
+	struct f_lb_opts *opts = to_f_lb_opts(item);
+	int ret;
+	u32 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou32(page, 0, &num);
+	if (ret)
+		goto end;
+
+	opts->bulk_buflen = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+CONFIGFS_ATTR(f_lb_opts_, bulk_buflen);
+
+static struct configfs_attribute *lb_attrs[] = {
+	&f_lb_opts_attr_qlen,
+	&f_lb_opts_attr_bulk_buflen,
+	NULL,
+};
+
+static const struct config_item_type lb_func_type = {
+	.ct_item_ops    = &lb_item_ops,
+	.ct_attrs	= lb_attrs,
+	.ct_owner       = THIS_MODULE,
+};
+
+static void lb_free_instance(struct usb_function_instance *fi)
+{
+	struct f_lb_opts *lb_opts;
+
+	lb_opts = container_of(fi, struct f_lb_opts, func_inst);
+	kfree(lb_opts);
+}
+
+static struct usb_function_instance *loopback_alloc_instance(void)
+{
+	struct f_lb_opts *lb_opts;
+
+	lb_opts = kzalloc(sizeof(*lb_opts), GFP_KERNEL);
+	if (!lb_opts)
+		return ERR_PTR(-ENOMEM);
+	mutex_init(&lb_opts->lock);
+	lb_opts->func_inst.free_func_inst = lb_free_instance;
+	lb_opts->bulk_buflen = GZERO_BULK_BUFLEN;
+	lb_opts->qlen = GZERO_QLEN;
+
+	config_group_init_type_name(&lb_opts->func_inst.group, "",
+				    &lb_func_type);
+
+	return  &lb_opts->func_inst;
+}
+DECLARE_USB_FUNCTION(Loopback, loopback_alloc_instance, loopback_alloc);
+
+int __init lb_modinit(void)
+{
+	return usb_function_register(&Loopbackusb_func);
+}
+
+void __exit lb_modexit(void)
+{
+	usb_function_unregister(&Loopbackusb_func);
+}
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
new file mode 100644
index 000000000..7b9a4cf9b
--- /dev/null
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -0,0 +1,3605 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * f_mass_storage.c -- Mass Storage USB Composite Function
+ *
+ * Copyright (C) 2003-2008 Alan Stern
+ * Copyright (C) 2009 Samsung Electronics
+ *                    Author: Michal Nazarewicz <mina86@mina86.com>
+ * All rights reserved.
+ */
+
+/*
+ * The Mass Storage Function acts as a USB Mass Storage device,
+ * appearing to the host as a disk drive or as a CD-ROM drive.  In
+ * addition to providing an example of a genuinely useful composite
+ * function for a USB device, it also illustrates a technique of
+ * double-buffering for increased throughput.
+ *
+ * For more information about MSF and in particular its module
+ * parameters and sysfs interface read the
+ * <Documentation/usb/mass-storage.rst> file.
+ */
+
+/*
+ * MSF is configured by specifying a fsg_config structure.  It has the
+ * following fields:
+ *
+ *	nluns		Number of LUNs function have (anywhere from 1
+ *				to FSG_MAX_LUNS).
+ *	luns		An array of LUN configuration values.  This
+ *				should be filled for each LUN that
+ *				function will include (ie. for "nluns"
+ *				LUNs).  Each element of the array has
+ *				the following fields:
+ *	->filename	The path to the backing file for the LUN.
+ *				Required if LUN is not marked as
+ *				removable.
+ *	->ro		Flag specifying access to the LUN shall be
+ *				read-only.  This is implied if CD-ROM
+ *				emulation is enabled as well as when
+ *				it was impossible to open "filename"
+ *				in R/W mode.
+ *	->removable	Flag specifying that LUN shall be indicated as
+ *				being removable.
+ *	->cdrom		Flag specifying that LUN shall be reported as
+ *				being a CD-ROM.
+ *	->nofua		Flag specifying that FUA flag in SCSI WRITE(10,12)
+ *				commands for this LUN shall be ignored.
+ *
+ *	vendor_name
+ *	product_name
+ *	release		Information used as a reply to INQUIRY
+ *				request.  To use default set to NULL,
+ *				NULL, 0xffff respectively.  The first
+ *				field should be 8 and the second 16
+ *				characters or less.
+ *
+ *	can_stall	Set to permit function to halt bulk endpoints.
+ *				Disabled on some USB devices known not
+ *				to work correctly.  You should set it
+ *				to true.
+ *
+ * If "removable" is not set for a LUN then a backing file must be
+ * specified.  If it is set, then NULL filename means the LUN's medium
+ * is not loaded (an empty string as "filename" in the fsg_config
+ * structure causes error).  The CD-ROM emulation includes a single
+ * data track and no audio tracks; hence there need be only one
+ * backing file per LUN.
+ *
+ * This function is heavily based on "File-backed Storage Gadget" by
+ * Alan Stern which in turn is heavily based on "Gadget Zero" by David
+ * Brownell.  The driver's SCSI command interface was based on the
+ * "Information technology - Small Computer System Interface - 2"
+ * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93,
+ * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.
+ * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which
+ * was based on the "Universal Serial Bus Mass Storage Class UFI
+ * Command Specification" document, Revision 1.0, December 14, 1998,
+ * available at
+ * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
+ */
+
+/*
+ *				Driver Design
+ *
+ * The MSF is fairly straightforward.  There is a main kernel
+ * thread that handles most of the work.  Interrupt routines field
+ * callbacks from the controller driver: bulk- and interrupt-request
+ * completion notifications, endpoint-0 events, and disconnect events.
+ * Completion events are passed to the main thread by wakeup calls.  Many
+ * ep0 requests are handled at interrupt time, but SetInterface,
+ * SetConfiguration, and device reset requests are forwarded to the
+ * thread in the form of "exceptions" using SIGUSR1 signals (since they
+ * should interrupt any ongoing file I/O operations).
+ *
+ * The thread's main routine implements the standard command/data/status
+ * parts of a SCSI interaction.  It and its subroutines are full of tests
+ * for pending signals/exceptions -- all this polling is necessary since
+ * the kernel has no setjmp/longjmp equivalents.  (Maybe this is an
+ * indication that the driver really wants to be running in userspace.)
+ * An important point is that so long as the thread is alive it keeps an
+ * open reference to the backing file.  This will prevent unmounting
+ * the backing file's underlying filesystem and could cause problems
+ * during system shutdown, for example.  To prevent such problems, the
+ * thread catches INT, TERM, and KILL signals and converts them into
+ * an EXIT exception.
+ *
+ * In normal operation the main thread is started during the gadget's
+ * fsg_bind() callback and stopped during fsg_unbind().  But it can
+ * also exit when it receives a signal, and there's no point leaving
+ * the gadget running when the thread is dead.  As of this moment, MSF
+ * provides no way to deregister the gadget when thread dies -- maybe
+ * a callback functions is needed.
+ *
+ * To provide maximum throughput, the driver uses a circular pipeline of
+ * buffer heads (struct fsg_buffhd).  In principle the pipeline can be
+ * arbitrarily long; in practice the benefits don't justify having more
+ * than 2 stages (i.e., double buffering).  But it helps to think of the
+ * pipeline as being a long one.  Each buffer head contains a bulk-in and
+ * a bulk-out request pointer (since the buffer can be used for both
+ * output and input -- directions always are given from the host's
+ * point of view) as well as a pointer to the buffer and various state
+ * variables.
+ *
+ * Use of the pipeline follows a simple protocol.  There is a variable
+ * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
+ * At any time that buffer head may still be in use from an earlier
+ * request, so each buffer head has a state variable indicating whether
+ * it is EMPTY, FULL, or BUSY.  Typical use involves waiting for the
+ * buffer head to be EMPTY, filling the buffer either by file I/O or by
+ * USB I/O (during which the buffer head is BUSY), and marking the buffer
+ * head FULL when the I/O is complete.  Then the buffer will be emptied
+ * (again possibly by USB I/O, during which it is marked BUSY) and
+ * finally marked EMPTY again (possibly by a completion routine).
+ *
+ * A module parameter tells the driver to avoid stalling the bulk
+ * endpoints wherever the transport specification allows.  This is
+ * necessary for some UDCs like the SuperH, which cannot reliably clear a
+ * halt on a bulk endpoint.  However, under certain circumstances the
+ * Bulk-only specification requires a stall.  In such cases the driver
+ * will halt the endpoint and set a flag indicating that it should clear
+ * the halt in software during the next device reset.  Hopefully this
+ * will permit everything to work correctly.  Furthermore, although the
+ * specification allows the bulk-out endpoint to halt when the host sends
+ * too much data, implementing this would cause an unavoidable race.
+ * The driver will always use the "no-stall" approach for OUT transfers.
+ *
+ * One subtle point concerns sending status-stage responses for ep0
+ * requests.  Some of these requests, such as device reset, can involve
+ * interrupting an ongoing file I/O operation, which might take an
+ * arbitrarily long time.  During that delay the host might give up on
+ * the original ep0 request and issue a new one.  When that happens the
+ * driver should not notify the host about completion of the original
+ * request, as the host will no longer be waiting for it.  So the driver
+ * assigns to each ep0 request a unique tag, and it keeps track of the
+ * tag value of the request associated with a long-running exception
+ * (device-reset, interface-change, or configuration-change).  When the
+ * exception handler is finished, the status-stage response is submitted
+ * only if the current ep0 request tag is equal to the exception request
+ * tag.  Thus only the most recently received ep0 request will get a
+ * status-stage response.
+ *
+ * Warning: This driver source file is too long.  It ought to be split up
+ * into a header file plus about 3 separate .c files, to handle the details
+ * of the Gadget, USB Mass Storage, and SCSI protocols.
+ */
+
+
+/* #define VERBOSE_DEBUG */
+/* #define DUMP_MSGS */
+
+#include <linux/blkdev.h>
+#include <linux/completion.h>
+#include <linux/dcache.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/fcntl.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/kthread.h>
+#include <linux/sched/signal.h>
+#include <linux/limits.h>
+#include <linux/pagemap.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/freezer.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <asm/unaligned.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/composite.h>
+
+#include <linux/nospec.h>
+
+#include "configfs.h"
+
+
+/*------------------------------------------------------------------------*/
+
+#define FSG_DRIVER_DESC		"Mass Storage Function"
+#define FSG_DRIVER_VERSION	"2009/09/11"
+
+static const char fsg_string_interface[] = "Mass Storage";
+
+#include "storage_common.h"
+#include "f_mass_storage.h"
+
+/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
+static struct usb_string		fsg_strings[] = {
+	{FSG_STRING_INTERFACE,		fsg_string_interface},
+	{}
+};
+
+static struct usb_gadget_strings	fsg_stringtab = {
+	.language	= 0x0409,		/* en-us */
+	.strings	= fsg_strings,
+};
+
+static struct usb_gadget_strings *fsg_strings_array[] = {
+	&fsg_stringtab,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+struct fsg_dev;
+struct fsg_common;
+
+/* Data shared by all the FSG instances. */
+struct fsg_common {
+	struct usb_gadget	*gadget;
+	struct usb_composite_dev *cdev;
+	struct fsg_dev		*fsg;
+	wait_queue_head_t	io_wait;
+	wait_queue_head_t	fsg_wait;
+
+	/* filesem protects: backing files in use */
+	struct rw_semaphore	filesem;
+
+	/* lock protects: state and thread_task */
+	spinlock_t		lock;
+
+	struct usb_ep		*ep0;		/* Copy of gadget->ep0 */
+	struct usb_request	*ep0req;	/* Copy of cdev->req */
+	unsigned int		ep0_req_tag;
+
+	struct fsg_buffhd	*next_buffhd_to_fill;
+	struct fsg_buffhd	*next_buffhd_to_drain;
+	struct fsg_buffhd	*buffhds;
+	unsigned int		fsg_num_buffers;
+
+	int			cmnd_size;
+	u8			cmnd[MAX_COMMAND_SIZE];
+
+	unsigned int		lun;
+	struct fsg_lun		*luns[FSG_MAX_LUNS];
+	struct fsg_lun		*curlun;
+
+	unsigned int		bulk_out_maxpacket;
+	enum fsg_state		state;		/* For exception handling */
+	unsigned int		exception_req_tag;
+	void			*exception_arg;
+
+	enum data_direction	data_dir;
+	u32			data_size;
+	u32			data_size_from_cmnd;
+	u32			tag;
+	u32			residue;
+	u32			usb_amount_left;
+
+	unsigned int		can_stall:1;
+	unsigned int		free_storage_on_release:1;
+	unsigned int		phase_error:1;
+	unsigned int		short_packet_received:1;
+	unsigned int		bad_lun_okay:1;
+	unsigned int		running:1;
+	unsigned int		sysfs:1;
+
+	struct completion	thread_notifier;
+	struct task_struct	*thread_task;
+
+	/* Gadget's private data. */
+	void			*private_data;
+
+	char inquiry_string[INQUIRY_STRING_LEN];
+};
+
+struct fsg_dev {
+	struct usb_function	function;
+	struct usb_gadget	*gadget;	/* Copy of cdev->gadget */
+	struct fsg_common	*common;
+
+	u16			interface_number;
+
+	unsigned int		bulk_in_enabled:1;
+	unsigned int		bulk_out_enabled:1;
+
+	unsigned long		atomic_bitflags;
+#define IGNORE_BULK_OUT		0
+
+	struct usb_ep		*bulk_in;
+	struct usb_ep		*bulk_out;
+};
+
+static inline int __fsg_is_set(struct fsg_common *common,
+			       const char *func, unsigned line)
+{
+	if (common->fsg)
+		return 1;
+	ERROR(common, "common->fsg is NULL in %s at %u\n", func, line);
+	WARN_ON(1);
+	return 0;
+}
+
+#define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__))
+
+static inline struct fsg_dev *fsg_from_func(struct usb_function *f)
+{
+	return container_of(f, struct fsg_dev, function);
+}
+
+static int exception_in_progress(struct fsg_common *common)
+{
+	return common->state > FSG_STATE_NORMAL;
+}
+
+/* Make bulk-out requests be divisible by the maxpacket size */
+static void set_bulk_out_req_length(struct fsg_common *common,
+				    struct fsg_buffhd *bh, unsigned int length)
+{
+	unsigned int	rem;
+
+	bh->bulk_out_intended_length = length;
+	rem = length % common->bulk_out_maxpacket;
+	if (rem > 0)
+		length += common->bulk_out_maxpacket - rem;
+	bh->outreq->length = length;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
+{
+	const char	*name;
+
+	if (ep == fsg->bulk_in)
+		name = "bulk-in";
+	else if (ep == fsg->bulk_out)
+		name = "bulk-out";
+	else
+		name = ep->name;
+	DBG(fsg, "%s set halt\n", name);
+	return usb_ep_set_halt(ep);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* These routines may be called in process context or in_irq */
+
+static void __raise_exception(struct fsg_common *common, enum fsg_state new_state,
+			      void *arg)
+{
+	unsigned long		flags;
+
+	/*
+	 * Do nothing if a higher-priority exception is already in progress.
+	 * If a lower-or-equal priority exception is in progress, preempt it
+	 * and notify the main thread by sending it a signal.
+	 */
+	spin_lock_irqsave(&common->lock, flags);
+	if (common->state <= new_state) {
+		common->exception_req_tag = common->ep0_req_tag;
+		common->state = new_state;
+		common->exception_arg = arg;
+		if (common->thread_task)
+			send_sig_info(SIGUSR1, SEND_SIG_PRIV,
+				      common->thread_task);
+	}
+	spin_unlock_irqrestore(&common->lock, flags);
+}
+
+static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
+{
+	__raise_exception(common, new_state, NULL);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int ep0_queue(struct fsg_common *common)
+{
+	int	rc;
+
+	rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC);
+	common->ep0->driver_data = common;
+	if (rc != 0 && rc != -ESHUTDOWN) {
+		/* We can't do much more than wait for a reset */
+		WARNING(common, "error in submission: %s --> %d\n",
+			common->ep0->name, rc);
+	}
+	return rc;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Completion handlers. These always run in_irq. */
+
+static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct fsg_common	*common = ep->driver_data;
+	struct fsg_buffhd	*bh = req->context;
+
+	if (req->status || req->actual != req->length)
+		DBG(common, "%s --> %d, %u/%u\n", __func__,
+		    req->status, req->actual, req->length);
+	if (req->status == -ECONNRESET)		/* Request was cancelled */
+		usb_ep_fifo_flush(ep);
+
+	/* Synchronize with the smp_load_acquire() in sleep_thread() */
+	smp_store_release(&bh->state, BUF_STATE_EMPTY);
+	wake_up(&common->io_wait);
+}
+
+static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct fsg_common	*common = ep->driver_data;
+	struct fsg_buffhd	*bh = req->context;
+
+	dump_msg(common, "bulk-out", req->buf, req->actual);
+	if (req->status || req->actual != bh->bulk_out_intended_length)
+		DBG(common, "%s --> %d, %u/%u\n", __func__,
+		    req->status, req->actual, bh->bulk_out_intended_length);
+	if (req->status == -ECONNRESET)		/* Request was cancelled */
+		usb_ep_fifo_flush(ep);
+
+	/* Synchronize with the smp_load_acquire() in sleep_thread() */
+	smp_store_release(&bh->state, BUF_STATE_FULL);
+	wake_up(&common->io_wait);
+}
+
+static int _fsg_common_get_max_lun(struct fsg_common *common)
+{
+	int i = ARRAY_SIZE(common->luns) - 1;
+
+	while (i >= 0 && !common->luns[i])
+		--i;
+
+	return i;
+}
+
+static int fsg_setup(struct usb_function *f,
+		     const struct usb_ctrlrequest *ctrl)
+{
+	struct fsg_dev		*fsg = fsg_from_func(f);
+	struct usb_request	*req = fsg->common->ep0req;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	if (!fsg_is_set(fsg->common))
+		return -EOPNOTSUPP;
+
+	++fsg->common->ep0_req_tag;	/* Record arrival of a new request */
+	req->context = NULL;
+	req->length = 0;
+	dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
+
+	switch (ctrl->bRequest) {
+
+	case US_BULK_RESET_REQUEST:
+		if (ctrl->bRequestType !=
+		    (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
+			break;
+		if (w_index != fsg->interface_number || w_value != 0 ||
+				w_length != 0)
+			return -EDOM;
+
+		/*
+		 * Raise an exception to stop the current operation
+		 * and reinitialize our state.
+		 */
+		DBG(fsg, "bulk reset request\n");
+		raise_exception(fsg->common, FSG_STATE_PROTOCOL_RESET);
+		return USB_GADGET_DELAYED_STATUS;
+
+	case US_BULK_GET_MAX_LUN:
+		if (ctrl->bRequestType !=
+		    (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
+			break;
+		if (w_index != fsg->interface_number || w_value != 0 ||
+				w_length != 1)
+			return -EDOM;
+		VDBG(fsg, "get max LUN\n");
+		*(u8 *)req->buf = _fsg_common_get_max_lun(fsg->common);
+
+		/* Respond with data/status */
+		req->length = min((u16)1, w_length);
+		return ep0_queue(fsg->common);
+	}
+
+	VDBG(fsg,
+	     "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n",
+	     ctrl->bRequestType, ctrl->bRequest,
+	     le16_to_cpu(ctrl->wValue), w_index, w_length);
+	return -EOPNOTSUPP;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* All the following routines run in process context */
+
+/* Use this for bulk or interrupt transfers, not ep0 */
+static int start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
+			   struct usb_request *req)
+{
+	int	rc;
+
+	if (ep == fsg->bulk_in)
+		dump_msg(fsg, "bulk-in", req->buf, req->length);
+
+	rc = usb_ep_queue(ep, req, GFP_KERNEL);
+	if (rc) {
+
+		/* We can't do much more than wait for a reset */
+		req->status = rc;
+
+		/*
+		 * Note: currently the net2280 driver fails zero-length
+		 * submissions if DMA is enabled.
+		 */
+		if (rc != -ESHUTDOWN &&
+				!(rc == -EOPNOTSUPP && req->length == 0))
+			WARNING(fsg, "error in submission: %s --> %d\n",
+					ep->name, rc);
+	}
+	return rc;
+}
+
+static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	if (!fsg_is_set(common))
+		return false;
+	bh->state = BUF_STATE_SENDING;
+	if (start_transfer(common->fsg, common->fsg->bulk_in, bh->inreq))
+		bh->state = BUF_STATE_EMPTY;
+	return true;
+}
+
+static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	if (!fsg_is_set(common))
+		return false;
+	bh->state = BUF_STATE_RECEIVING;
+	if (start_transfer(common->fsg, common->fsg->bulk_out, bh->outreq))
+		bh->state = BUF_STATE_FULL;
+	return true;
+}
+
+static int sleep_thread(struct fsg_common *common, bool can_freeze,
+		struct fsg_buffhd *bh)
+{
+	int	rc;
+
+	/* Wait until a signal arrives or bh is no longer busy */
+	if (can_freeze)
+		/*
+		 * synchronize with the smp_store_release(&bh->state) in
+		 * bulk_in_complete() or bulk_out_complete()
+		 */
+		rc = wait_event_freezable(common->io_wait,
+				bh && smp_load_acquire(&bh->state) >=
+					BUF_STATE_EMPTY);
+	else
+		rc = wait_event_interruptible(common->io_wait,
+				bh && smp_load_acquire(&bh->state) >=
+					BUF_STATE_EMPTY);
+	return rc ? -EINTR : 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int do_read(struct fsg_common *common)
+{
+	struct fsg_lun		*curlun = common->curlun;
+	u64			lba;
+	struct fsg_buffhd	*bh;
+	int			rc;
+	u32			amount_left;
+	loff_t			file_offset, file_offset_tmp;
+	unsigned int		amount;
+	ssize_t			nread;
+
+	/*
+	 * Get the starting Logical Block Address and check that it's
+	 * not too big.
+	 */
+	if (common->cmnd[0] == READ_6)
+		lba = get_unaligned_be24(&common->cmnd[1]);
+	else {
+		if (common->cmnd[0] == READ_16)
+			lba = get_unaligned_be64(&common->cmnd[2]);
+		else		/* READ_10 or READ_12 */
+			lba = get_unaligned_be32(&common->cmnd[2]);
+
+		/*
+		 * We allow DPO (Disable Page Out = don't save data in the
+		 * cache) and FUA (Force Unit Access = don't read from the
+		 * cache), but we don't implement them.
+		 */
+		if ((common->cmnd[1] & ~0x18) != 0) {
+			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+			return -EINVAL;
+		}
+	}
+	if (lba >= curlun->num_sectors) {
+		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+		return -EINVAL;
+	}
+	file_offset = ((loff_t) lba) << curlun->blkbits;
+
+	/* Carry out the file reads */
+	amount_left = common->data_size_from_cmnd;
+	if (unlikely(amount_left == 0))
+		return -EIO;		/* No default reply */
+
+	for (;;) {
+		/*
+		 * Figure out how much we need to read:
+		 * Try to read the remaining amount.
+		 * But don't read more than the buffer size.
+		 * And don't try to read past the end of the file.
+		 */
+		amount = min(amount_left, FSG_BUFLEN);
+		amount = min((loff_t)amount,
+			     curlun->file_length - file_offset);
+
+		/* Wait for the next buffer to become available */
+		bh = common->next_buffhd_to_fill;
+		rc = sleep_thread(common, false, bh);
+		if (rc)
+			return rc;
+
+		/*
+		 * If we were asked to read past the end of file,
+		 * end with an empty buffer.
+		 */
+		if (amount == 0) {
+			curlun->sense_data =
+					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+			curlun->sense_data_info =
+					file_offset >> curlun->blkbits;
+			curlun->info_valid = 1;
+			bh->inreq->length = 0;
+			bh->state = BUF_STATE_FULL;
+			break;
+		}
+
+		/* Perform the read */
+		file_offset_tmp = file_offset;
+		nread = kernel_read(curlun->filp, bh->buf, amount,
+				&file_offset_tmp);
+		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
+		      (unsigned long long)file_offset, (int)nread);
+		if (signal_pending(current))
+			return -EINTR;
+
+		if (nread < 0) {
+			LDBG(curlun, "error in file read: %d\n", (int)nread);
+			nread = 0;
+		} else if (nread < amount) {
+			LDBG(curlun, "partial file read: %d/%u\n",
+			     (int)nread, amount);
+			nread = round_down(nread, curlun->blksize);
+		}
+		file_offset  += nread;
+		amount_left  -= nread;
+		common->residue -= nread;
+
+		/*
+		 * Except at the end of the transfer, nread will be
+		 * equal to the buffer size, which is divisible by the
+		 * bulk-in maxpacket size.
+		 */
+		bh->inreq->length = nread;
+		bh->state = BUF_STATE_FULL;
+
+		/* If an error occurred, report it and its position */
+		if (nread < amount) {
+			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
+			curlun->sense_data_info =
+					file_offset >> curlun->blkbits;
+			curlun->info_valid = 1;
+			break;
+		}
+
+		if (amount_left == 0)
+			break;		/* No more left to read */
+
+		/* Send this buffer and go read some more */
+		bh->inreq->zero = 0;
+		if (!start_in_transfer(common, bh))
+			/* Don't know what to do if common->fsg is NULL */
+			return -EIO;
+		common->next_buffhd_to_fill = bh->next;
+	}
+
+	return -EIO;		/* No default reply */
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int do_write(struct fsg_common *common)
+{
+	struct fsg_lun		*curlun = common->curlun;
+	u64			lba;
+	struct fsg_buffhd	*bh;
+	int			get_some_more;
+	u32			amount_left_to_req, amount_left_to_write;
+	loff_t			usb_offset, file_offset, file_offset_tmp;
+	unsigned int		amount;
+	ssize_t			nwritten;
+	int			rc;
+
+	if (curlun->ro) {
+		curlun->sense_data = SS_WRITE_PROTECTED;
+		return -EINVAL;
+	}
+	spin_lock(&curlun->filp->f_lock);
+	curlun->filp->f_flags &= ~O_SYNC;	/* Default is not to wait */
+	spin_unlock(&curlun->filp->f_lock);
+
+	/*
+	 * Get the starting Logical Block Address and check that it's
+	 * not too big
+	 */
+	if (common->cmnd[0] == WRITE_6)
+		lba = get_unaligned_be24(&common->cmnd[1]);
+	else {
+		if (common->cmnd[0] == WRITE_16)
+			lba = get_unaligned_be64(&common->cmnd[2]);
+		else		/* WRITE_10 or WRITE_12 */
+			lba = get_unaligned_be32(&common->cmnd[2]);
+
+		/*
+		 * We allow DPO (Disable Page Out = don't save data in the
+		 * cache) and FUA (Force Unit Access = write directly to the
+		 * medium).  We don't implement DPO; we implement FUA by
+		 * performing synchronous output.
+		 */
+		if (common->cmnd[1] & ~0x18) {
+			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+			return -EINVAL;
+		}
+		if (!curlun->nofua && (common->cmnd[1] & 0x08)) { /* FUA */
+			spin_lock(&curlun->filp->f_lock);
+			curlun->filp->f_flags |= O_SYNC;
+			spin_unlock(&curlun->filp->f_lock);
+		}
+	}
+	if (lba >= curlun->num_sectors) {
+		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+		return -EINVAL;
+	}
+
+	/* Carry out the file writes */
+	get_some_more = 1;
+	file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
+	amount_left_to_req = common->data_size_from_cmnd;
+	amount_left_to_write = common->data_size_from_cmnd;
+
+	while (amount_left_to_write > 0) {
+
+		/* Queue a request for more data from the host */
+		bh = common->next_buffhd_to_fill;
+		if (bh->state == BUF_STATE_EMPTY && get_some_more) {
+
+			/*
+			 * Figure out how much we want to get:
+			 * Try to get the remaining amount,
+			 * but not more than the buffer size.
+			 */
+			amount = min(amount_left_to_req, FSG_BUFLEN);
+
+			/* Beyond the end of the backing file? */
+			if (usb_offset >= curlun->file_length) {
+				get_some_more = 0;
+				curlun->sense_data =
+					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+				curlun->sense_data_info =
+					usb_offset >> curlun->blkbits;
+				curlun->info_valid = 1;
+				continue;
+			}
+
+			/* Get the next buffer */
+			usb_offset += amount;
+			common->usb_amount_left -= amount;
+			amount_left_to_req -= amount;
+			if (amount_left_to_req == 0)
+				get_some_more = 0;
+
+			/*
+			 * Except at the end of the transfer, amount will be
+			 * equal to the buffer size, which is divisible by
+			 * the bulk-out maxpacket size.
+			 */
+			set_bulk_out_req_length(common, bh, amount);
+			if (!start_out_transfer(common, bh))
+				/* Dunno what to do if common->fsg is NULL */
+				return -EIO;
+			common->next_buffhd_to_fill = bh->next;
+			continue;
+		}
+
+		/* Write the received data to the backing file */
+		bh = common->next_buffhd_to_drain;
+		if (bh->state == BUF_STATE_EMPTY && !get_some_more)
+			break;			/* We stopped early */
+
+		/* Wait for the data to be received */
+		rc = sleep_thread(common, false, bh);
+		if (rc)
+			return rc;
+
+		common->next_buffhd_to_drain = bh->next;
+		bh->state = BUF_STATE_EMPTY;
+
+		/* Did something go wrong with the transfer? */
+		if (bh->outreq->status != 0) {
+			curlun->sense_data = SS_COMMUNICATION_FAILURE;
+			curlun->sense_data_info =
+					file_offset >> curlun->blkbits;
+			curlun->info_valid = 1;
+			break;
+		}
+
+		amount = bh->outreq->actual;
+		if (curlun->file_length - file_offset < amount) {
+			LERROR(curlun, "write %u @ %llu beyond end %llu\n",
+				       amount, (unsigned long long)file_offset,
+				       (unsigned long long)curlun->file_length);
+			amount = curlun->file_length - file_offset;
+		}
+
+		/*
+		 * Don't accept excess data.  The spec doesn't say
+		 * what to do in this case.  We'll ignore the error.
+		 */
+		amount = min(amount, bh->bulk_out_intended_length);
+
+		/* Don't write a partial block */
+		amount = round_down(amount, curlun->blksize);
+		if (amount == 0)
+			goto empty_write;
+
+		/* Perform the write */
+		file_offset_tmp = file_offset;
+		nwritten = kernel_write(curlun->filp, bh->buf, amount,
+				&file_offset_tmp);
+		VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
+				(unsigned long long)file_offset, (int)nwritten);
+		if (signal_pending(current))
+			return -EINTR;		/* Interrupted! */
+
+		if (nwritten < 0) {
+			LDBG(curlun, "error in file write: %d\n",
+					(int) nwritten);
+			nwritten = 0;
+		} else if (nwritten < amount) {
+			LDBG(curlun, "partial file write: %d/%u\n",
+					(int) nwritten, amount);
+			nwritten = round_down(nwritten, curlun->blksize);
+		}
+		file_offset += nwritten;
+		amount_left_to_write -= nwritten;
+		common->residue -= nwritten;
+
+		/* If an error occurred, report it and its position */
+		if (nwritten < amount) {
+			curlun->sense_data = SS_WRITE_ERROR;
+			curlun->sense_data_info =
+					file_offset >> curlun->blkbits;
+			curlun->info_valid = 1;
+			break;
+		}
+
+ empty_write:
+		/* Did the host decide to stop early? */
+		if (bh->outreq->actual < bh->bulk_out_intended_length) {
+			common->short_packet_received = 1;
+			break;
+		}
+	}
+
+	return -EIO;		/* No default reply */
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int do_synchronize_cache(struct fsg_common *common)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	int		rc;
+
+	/* We ignore the requested LBA and write out all file's
+	 * dirty data buffers. */
+	rc = fsg_lun_fsync_sub(curlun);
+	if (rc)
+		curlun->sense_data = SS_WRITE_ERROR;
+	return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static void invalidate_sub(struct fsg_lun *curlun)
+{
+	struct file	*filp = curlun->filp;
+	struct inode	*inode = file_inode(filp);
+	unsigned long __maybe_unused	rc;
+
+	rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
+	VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
+}
+
+static int do_verify(struct fsg_common *common)
+{
+	struct fsg_lun		*curlun = common->curlun;
+	u32			lba;
+	u32			verification_length;
+	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
+	loff_t			file_offset, file_offset_tmp;
+	u32			amount_left;
+	unsigned int		amount;
+	ssize_t			nread;
+
+	/*
+	 * Get the starting Logical Block Address and check that it's
+	 * not too big.
+	 */
+	lba = get_unaligned_be32(&common->cmnd[2]);
+	if (lba >= curlun->num_sectors) {
+		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+		return -EINVAL;
+	}
+
+	/*
+	 * We allow DPO (Disable Page Out = don't save data in the
+	 * cache) but we don't implement it.
+	 */
+	if (common->cmnd[1] & ~0x10) {
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+
+	verification_length = get_unaligned_be16(&common->cmnd[7]);
+	if (unlikely(verification_length == 0))
+		return -EIO;		/* No default reply */
+
+	/* Prepare to carry out the file verify */
+	amount_left = verification_length << curlun->blkbits;
+	file_offset = ((loff_t) lba) << curlun->blkbits;
+
+	/* Write out all the dirty buffers before invalidating them */
+	fsg_lun_fsync_sub(curlun);
+	if (signal_pending(current))
+		return -EINTR;
+
+	invalidate_sub(curlun);
+	if (signal_pending(current))
+		return -EINTR;
+
+	/* Just try to read the requested blocks */
+	while (amount_left > 0) {
+		/*
+		 * Figure out how much we need to read:
+		 * Try to read the remaining amount, but not more than
+		 * the buffer size.
+		 * And don't try to read past the end of the file.
+		 */
+		amount = min(amount_left, FSG_BUFLEN);
+		amount = min((loff_t)amount,
+			     curlun->file_length - file_offset);
+		if (amount == 0) {
+			curlun->sense_data =
+					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+			curlun->sense_data_info =
+				file_offset >> curlun->blkbits;
+			curlun->info_valid = 1;
+			break;
+		}
+
+		/* Perform the read */
+		file_offset_tmp = file_offset;
+		nread = kernel_read(curlun->filp, bh->buf, amount,
+				&file_offset_tmp);
+		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
+				(unsigned long long) file_offset,
+				(int) nread);
+		if (signal_pending(current))
+			return -EINTR;
+
+		if (nread < 0) {
+			LDBG(curlun, "error in file verify: %d\n", (int)nread);
+			nread = 0;
+		} else if (nread < amount) {
+			LDBG(curlun, "partial file verify: %d/%u\n",
+			     (int)nread, amount);
+			nread = round_down(nread, curlun->blksize);
+		}
+		if (nread == 0) {
+			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
+			curlun->sense_data_info =
+				file_offset >> curlun->blkbits;
+			curlun->info_valid = 1;
+			break;
+		}
+		file_offset += nread;
+		amount_left -= nread;
+	}
+	return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	struct fsg_lun *curlun = common->curlun;
+	u8	*buf = (u8 *) bh->buf;
+
+	if (!curlun) {		/* Unsupported LUNs are okay */
+		common->bad_lun_okay = 1;
+		memset(buf, 0, 36);
+		buf[0] = TYPE_NO_LUN;	/* Unsupported, no device-type */
+		buf[4] = 31;		/* Additional length */
+		return 36;
+	}
+
+	buf[0] = curlun->cdrom ? TYPE_ROM : TYPE_DISK;
+	buf[1] = curlun->removable ? 0x80 : 0;
+	buf[2] = 2;		/* ANSI SCSI level 2 */
+	buf[3] = 2;		/* SCSI-2 INQUIRY data format */
+	buf[4] = 31;		/* Additional length */
+	buf[5] = 0;		/* No special options */
+	buf[6] = 0;
+	buf[7] = 0;
+	if (curlun->inquiry_string[0])
+		memcpy(buf + 8, curlun->inquiry_string,
+		       sizeof(curlun->inquiry_string));
+	else
+		memcpy(buf + 8, common->inquiry_string,
+		       sizeof(common->inquiry_string));
+	return 36;
+}
+
+static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	u8		*buf = (u8 *) bh->buf;
+	u32		sd, sdinfo;
+	int		valid;
+
+	/*
+	 * From the SCSI-2 spec., section 7.9 (Unit attention condition):
+	 *
+	 * If a REQUEST SENSE command is received from an initiator
+	 * with a pending unit attention condition (before the target
+	 * generates the contingent allegiance condition), then the
+	 * target shall either:
+	 *   a) report any pending sense data and preserve the unit
+	 *	attention condition on the logical unit, or,
+	 *   b) report the unit attention condition, may discard any
+	 *	pending sense data, and clear the unit attention
+	 *	condition on the logical unit for that initiator.
+	 *
+	 * FSG normally uses option a); enable this code to use option b).
+	 */
+#if 0
+	if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
+		curlun->sense_data = curlun->unit_attention_data;
+		curlun->unit_attention_data = SS_NO_SENSE;
+	}
+#endif
+
+	if (!curlun) {		/* Unsupported LUNs are okay */
+		common->bad_lun_okay = 1;
+		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
+		sdinfo = 0;
+		valid = 0;
+	} else {
+		sd = curlun->sense_data;
+		sdinfo = curlun->sense_data_info;
+		valid = curlun->info_valid << 7;
+		curlun->sense_data = SS_NO_SENSE;
+		curlun->sense_data_info = 0;
+		curlun->info_valid = 0;
+	}
+
+	memset(buf, 0, 18);
+	buf[0] = valid | 0x70;			/* Valid, current error */
+	buf[2] = SK(sd);
+	put_unaligned_be32(sdinfo, &buf[3]);	/* Sense information */
+	buf[7] = 18 - 8;			/* Additional sense length */
+	buf[12] = ASC(sd);
+	buf[13] = ASCQ(sd);
+	return 18;
+}
+
+static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	u32		lba = get_unaligned_be32(&common->cmnd[2]);
+	int		pmi = common->cmnd[8];
+	u8		*buf = (u8 *)bh->buf;
+	u32		max_lba;
+
+	/* Check the PMI and LBA fields */
+	if (pmi > 1 || (pmi == 0 && lba != 0)) {
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+
+	if (curlun->num_sectors < 0x100000000ULL)
+		max_lba = curlun->num_sectors - 1;
+	else
+		max_lba = 0xffffffff;
+	put_unaligned_be32(max_lba, &buf[0]);		/* Max logical block */
+	put_unaligned_be32(curlun->blksize, &buf[4]);	/* Block length */
+	return 8;
+}
+
+static int do_read_capacity_16(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	struct fsg_lun  *curlun = common->curlun;
+	u64		lba = get_unaligned_be64(&common->cmnd[2]);
+	int		pmi = common->cmnd[14];
+	u8		*buf = (u8 *)bh->buf;
+
+	/* Check the PMI and LBA fields */
+	if (pmi > 1 || (pmi == 0 && lba != 0)) {
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+
+	put_unaligned_be64(curlun->num_sectors - 1, &buf[0]);
+							/* Max logical block */
+	put_unaligned_be32(curlun->blksize, &buf[8]);	/* Block length */
+
+	/* It is safe to keep other fields zeroed */
+	memset(&buf[12], 0, 32 - 12);
+	return 32;
+}
+
+static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	int		msf = common->cmnd[1] & 0x02;
+	u32		lba = get_unaligned_be32(&common->cmnd[2]);
+	u8		*buf = (u8 *)bh->buf;
+
+	if (common->cmnd[1] & ~0x02) {		/* Mask away MSF */
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+	if (lba >= curlun->num_sectors) {
+		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+		return -EINVAL;
+	}
+
+	memset(buf, 0, 8);
+	buf[0] = 0x01;		/* 2048 bytes of user data, rest is EC */
+	store_cdrom_address(&buf[4], msf, lba);
+	return 8;
+}
+
+static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	int		msf = common->cmnd[1] & 0x02;
+	int		start_track = common->cmnd[6];
+	u8		*buf = (u8 *)bh->buf;
+	u8		format;
+	int		i, len;
+
+	format = common->cmnd[2] & 0xf;
+
+	if ((common->cmnd[1] & ~0x02) != 0 ||	/* Mask away MSF */
+			(start_track > 1 && format != 0x1)) {
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+
+	/*
+	 * Check if CDB is old style SFF-8020i
+	 * i.e. format is in 2 MSBs of byte 9
+	 * Mac OS-X host sends us this.
+	 */
+	if (format == 0)
+		format = (common->cmnd[9] >> 6) & 0x3;
+
+	switch (format) {
+	case 0:	/* Formatted TOC */
+	case 1:	/* Multi-session info */
+		len = 4 + 2*8;		/* 4 byte header + 2 descriptors */
+		memset(buf, 0, len);
+		buf[1] = len - 2;	/* TOC Length excludes length field */
+		buf[2] = 1;		/* First track number */
+		buf[3] = 1;		/* Last track number */
+		buf[5] = 0x16;		/* Data track, copying allowed */
+		buf[6] = 0x01;		/* Only track is number 1 */
+		store_cdrom_address(&buf[8], msf, 0);
+
+		buf[13] = 0x16;		/* Lead-out track is data */
+		buf[14] = 0xAA;		/* Lead-out track number */
+		store_cdrom_address(&buf[16], msf, curlun->num_sectors);
+		return len;
+
+	case 2:
+		/* Raw TOC */
+		len = 4 + 3*11;		/* 4 byte header + 3 descriptors */
+		memset(buf, 0, len);	/* Header + A0, A1 & A2 descriptors */
+		buf[1] = len - 2;	/* TOC Length excludes length field */
+		buf[2] = 1;		/* First complete session */
+		buf[3] = 1;		/* Last complete session */
+
+		buf += 4;
+		/* fill in A0, A1 and A2 points */
+		for (i = 0; i < 3; i++) {
+			buf[0] = 1;	/* Session number */
+			buf[1] = 0x16;	/* Data track, copying allowed */
+			/* 2 - Track number 0 ->  TOC */
+			buf[3] = 0xA0 + i; /* A0, A1, A2 point */
+			/* 4, 5, 6 - Min, sec, frame is zero */
+			buf[8] = 1;	/* Pmin: last track number */
+			buf += 11;	/* go to next track descriptor */
+		}
+		buf -= 11;		/* go back to A2 descriptor */
+
+		/* For A2, 7, 8, 9, 10 - zero, Pmin, Psec, Pframe of Lead out */
+		store_cdrom_address(&buf[7], msf, curlun->num_sectors);
+		return len;
+
+	default:
+		/* PMA, ATIP, CD-TEXT not supported/required */
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+}
+
+static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	int		mscmnd = common->cmnd[0];
+	u8		*buf = (u8 *) bh->buf;
+	u8		*buf0 = buf;
+	int		pc, page_code;
+	int		changeable_values, all_pages;
+	int		valid_page = 0;
+	int		len, limit;
+
+	if ((common->cmnd[1] & ~0x08) != 0) {	/* Mask away DBD */
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+	pc = common->cmnd[2] >> 6;
+	page_code = common->cmnd[2] & 0x3f;
+	if (pc == 3) {
+		curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
+		return -EINVAL;
+	}
+	changeable_values = (pc == 1);
+	all_pages = (page_code == 0x3f);
+
+	/*
+	 * Write the mode parameter header.  Fixed values are: default
+	 * medium type, no cache control (DPOFUA), and no block descriptors.
+	 * The only variable value is the WriteProtect bit.  We will fill in
+	 * the mode data length later.
+	 */
+	memset(buf, 0, 8);
+	if (mscmnd == MODE_SENSE) {
+		buf[2] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
+		buf += 4;
+		limit = 255;
+	} else {			/* MODE_SENSE_10 */
+		buf[3] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
+		buf += 8;
+		limit = 65535;		/* Should really be FSG_BUFLEN */
+	}
+
+	/* No block descriptors */
+
+	/*
+	 * The mode pages, in numerical order.  The only page we support
+	 * is the Caching page.
+	 */
+	if (page_code == 0x08 || all_pages) {
+		valid_page = 1;
+		buf[0] = 0x08;		/* Page code */
+		buf[1] = 10;		/* Page length */
+		memset(buf+2, 0, 10);	/* None of the fields are changeable */
+
+		if (!changeable_values) {
+			buf[2] = 0x04;	/* Write cache enable, */
+					/* Read cache not disabled */
+					/* No cache retention priorities */
+			put_unaligned_be16(0xffff, &buf[4]);
+					/* Don't disable prefetch */
+					/* Minimum prefetch = 0 */
+			put_unaligned_be16(0xffff, &buf[8]);
+					/* Maximum prefetch */
+			put_unaligned_be16(0xffff, &buf[10]);
+					/* Maximum prefetch ceiling */
+		}
+		buf += 12;
+	}
+
+	/*
+	 * Check that a valid page was requested and the mode data length
+	 * isn't too long.
+	 */
+	len = buf - buf0;
+	if (!valid_page || len > limit) {
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+
+	/*  Store the mode data length */
+	if (mscmnd == MODE_SENSE)
+		buf0[0] = len - 1;
+	else
+		put_unaligned_be16(len - 2, buf0);
+	return len;
+}
+
+static int do_start_stop(struct fsg_common *common)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	int		loej, start;
+
+	if (!curlun) {
+		return -EINVAL;
+	} else if (!curlun->removable) {
+		curlun->sense_data = SS_INVALID_COMMAND;
+		return -EINVAL;
+	} else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */
+		   (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+
+	loej  = common->cmnd[4] & 0x02;
+	start = common->cmnd[4] & 0x01;
+
+	/*
+	 * Our emulation doesn't support mounting; the medium is
+	 * available for use as soon as it is loaded.
+	 */
+	if (start) {
+		if (!fsg_lun_is_open(curlun)) {
+			curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
+			return -EINVAL;
+		}
+		return 0;
+	}
+
+	/* Are we allowed to unload the media? */
+	if (curlun->prevent_medium_removal) {
+		LDBG(curlun, "unload attempt prevented\n");
+		curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
+		return -EINVAL;
+	}
+
+	if (!loej)
+		return 0;
+
+	up_read(&common->filesem);
+	down_write(&common->filesem);
+	fsg_lun_close(curlun);
+	up_write(&common->filesem);
+	down_read(&common->filesem);
+
+	return 0;
+}
+
+static int do_prevent_allow(struct fsg_common *common)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	int		prevent;
+
+	if (!common->curlun) {
+		return -EINVAL;
+	} else if (!common->curlun->removable) {
+		common->curlun->sense_data = SS_INVALID_COMMAND;
+		return -EINVAL;
+	}
+
+	prevent = common->cmnd[4] & 0x01;
+	if ((common->cmnd[4] & ~0x01) != 0) {	/* Mask away Prevent */
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+
+	if (curlun->prevent_medium_removal && !prevent)
+		fsg_lun_fsync_sub(curlun);
+	curlun->prevent_medium_removal = prevent;
+	return 0;
+}
+
+static int do_read_format_capacities(struct fsg_common *common,
+			struct fsg_buffhd *bh)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	u8		*buf = (u8 *) bh->buf;
+
+	buf[0] = buf[1] = buf[2] = 0;
+	buf[3] = 8;	/* Only the Current/Maximum Capacity Descriptor */
+	buf += 4;
+
+	put_unaligned_be32(curlun->num_sectors, &buf[0]);
+						/* Number of blocks */
+	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
+	buf[4] = 0x02;				/* Current capacity */
+	return 12;
+}
+
+static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	struct fsg_lun	*curlun = common->curlun;
+
+	/* We don't support MODE SELECT */
+	if (curlun)
+		curlun->sense_data = SS_INVALID_COMMAND;
+	return -EINVAL;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
+{
+	int	rc;
+
+	rc = fsg_set_halt(fsg, fsg->bulk_in);
+	if (rc == -EAGAIN)
+		VDBG(fsg, "delayed bulk-in endpoint halt\n");
+	while (rc != 0) {
+		if (rc != -EAGAIN) {
+			WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
+			rc = 0;
+			break;
+		}
+
+		/* Wait for a short time and then try again */
+		if (msleep_interruptible(100) != 0)
+			return -EINTR;
+		rc = usb_ep_set_halt(fsg->bulk_in);
+	}
+	return rc;
+}
+
+static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
+{
+	int	rc;
+
+	DBG(fsg, "bulk-in set wedge\n");
+	rc = usb_ep_set_wedge(fsg->bulk_in);
+	if (rc == -EAGAIN)
+		VDBG(fsg, "delayed bulk-in endpoint wedge\n");
+	while (rc != 0) {
+		if (rc != -EAGAIN) {
+			WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
+			rc = 0;
+			break;
+		}
+
+		/* Wait for a short time and then try again */
+		if (msleep_interruptible(100) != 0)
+			return -EINTR;
+		rc = usb_ep_set_wedge(fsg->bulk_in);
+	}
+	return rc;
+}
+
+static int throw_away_data(struct fsg_common *common)
+{
+	struct fsg_buffhd	*bh, *bh2;
+	u32			amount;
+	int			rc;
+
+	for (bh = common->next_buffhd_to_drain;
+	     bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0;
+	     bh = common->next_buffhd_to_drain) {
+
+		/* Try to submit another request if we need one */
+		bh2 = common->next_buffhd_to_fill;
+		if (bh2->state == BUF_STATE_EMPTY &&
+				common->usb_amount_left > 0) {
+			amount = min(common->usb_amount_left, FSG_BUFLEN);
+
+			/*
+			 * Except at the end of the transfer, amount will be
+			 * equal to the buffer size, which is divisible by
+			 * the bulk-out maxpacket size.
+			 */
+			set_bulk_out_req_length(common, bh2, amount);
+			if (!start_out_transfer(common, bh2))
+				/* Dunno what to do if common->fsg is NULL */
+				return -EIO;
+			common->next_buffhd_to_fill = bh2->next;
+			common->usb_amount_left -= amount;
+			continue;
+		}
+
+		/* Wait for the data to be received */
+		rc = sleep_thread(common, false, bh);
+		if (rc)
+			return rc;
+
+		/* Throw away the data in a filled buffer */
+		bh->state = BUF_STATE_EMPTY;
+		common->next_buffhd_to_drain = bh->next;
+
+		/* A short packet or an error ends everything */
+		if (bh->outreq->actual < bh->bulk_out_intended_length ||
+				bh->outreq->status != 0) {
+			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
+			return -EINTR;
+		}
+	}
+	return 0;
+}
+
+static int finish_reply(struct fsg_common *common)
+{
+	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
+	int			rc = 0;
+
+	switch (common->data_dir) {
+	case DATA_DIR_NONE:
+		break;			/* Nothing to send */
+
+	/*
+	 * If we don't know whether the host wants to read or write,
+	 * this must be CB or CBI with an unknown command.  We mustn't
+	 * try to send or receive any data.  So stall both bulk pipes
+	 * if we can and wait for a reset.
+	 */
+	case DATA_DIR_UNKNOWN:
+		if (!common->can_stall) {
+			/* Nothing */
+		} else if (fsg_is_set(common)) {
+			fsg_set_halt(common->fsg, common->fsg->bulk_out);
+			rc = halt_bulk_in_endpoint(common->fsg);
+		} else {
+			/* Don't know what to do if common->fsg is NULL */
+			rc = -EIO;
+		}
+		break;
+
+	/* All but the last buffer of data must have already been sent */
+	case DATA_DIR_TO_HOST:
+		if (common->data_size == 0) {
+			/* Nothing to send */
+
+		/* Don't know what to do if common->fsg is NULL */
+		} else if (!fsg_is_set(common)) {
+			rc = -EIO;
+
+		/* If there's no residue, simply send the last buffer */
+		} else if (common->residue == 0) {
+			bh->inreq->zero = 0;
+			if (!start_in_transfer(common, bh))
+				return -EIO;
+			common->next_buffhd_to_fill = bh->next;
+
+		/*
+		 * For Bulk-only, mark the end of the data with a short
+		 * packet.  If we are allowed to stall, halt the bulk-in
+		 * endpoint.  (Note: This violates the Bulk-Only Transport
+		 * specification, which requires us to pad the data if we
+		 * don't halt the endpoint.  Presumably nobody will mind.)
+		 */
+		} else {
+			bh->inreq->zero = 1;
+			if (!start_in_transfer(common, bh))
+				rc = -EIO;
+			common->next_buffhd_to_fill = bh->next;
+			if (common->can_stall)
+				rc = halt_bulk_in_endpoint(common->fsg);
+		}
+		break;
+
+	/*
+	 * We have processed all we want from the data the host has sent.
+	 * There may still be outstanding bulk-out requests.
+	 */
+	case DATA_DIR_FROM_HOST:
+		if (common->residue == 0) {
+			/* Nothing to receive */
+
+		/* Did the host stop sending unexpectedly early? */
+		} else if (common->short_packet_received) {
+			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
+			rc = -EINTR;
+
+		/*
+		 * We haven't processed all the incoming data.  Even though
+		 * we may be allowed to stall, doing so would cause a race.
+		 * The controller may already have ACK'ed all the remaining
+		 * bulk-out packets, in which case the host wouldn't see a
+		 * STALL.  Not realizing the endpoint was halted, it wouldn't
+		 * clear the halt -- leading to problems later on.
+		 */
+#if 0
+		} else if (common->can_stall) {
+			if (fsg_is_set(common))
+				fsg_set_halt(common->fsg,
+					     common->fsg->bulk_out);
+			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
+			rc = -EINTR;
+#endif
+
+		/*
+		 * We can't stall.  Read in the excess data and throw it
+		 * all away.
+		 */
+		} else {
+			rc = throw_away_data(common);
+		}
+		break;
+	}
+	return rc;
+}
+
+static void send_status(struct fsg_common *common)
+{
+	struct fsg_lun		*curlun = common->curlun;
+	struct fsg_buffhd	*bh;
+	struct bulk_cs_wrap	*csw;
+	int			rc;
+	u8			status = US_BULK_STAT_OK;
+	u32			sd, sdinfo = 0;
+
+	/* Wait for the next buffer to become available */
+	bh = common->next_buffhd_to_fill;
+	rc = sleep_thread(common, false, bh);
+	if (rc)
+		return;
+
+	if (curlun) {
+		sd = curlun->sense_data;
+		sdinfo = curlun->sense_data_info;
+	} else if (common->bad_lun_okay)
+		sd = SS_NO_SENSE;
+	else
+		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
+
+	if (common->phase_error) {
+		DBG(common, "sending phase-error status\n");
+		status = US_BULK_STAT_PHASE;
+		sd = SS_INVALID_COMMAND;
+	} else if (sd != SS_NO_SENSE) {
+		DBG(common, "sending command-failure status\n");
+		status = US_BULK_STAT_FAIL;
+		VDBG(common, "  sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
+				"  info x%x\n",
+				SK(sd), ASC(sd), ASCQ(sd), sdinfo);
+	}
+
+	/* Store and send the Bulk-only CSW */
+	csw = (void *)bh->buf;
+
+	csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
+	csw->Tag = common->tag;
+	csw->Residue = cpu_to_le32(common->residue);
+	csw->Status = status;
+
+	bh->inreq->length = US_BULK_CS_WRAP_LEN;
+	bh->inreq->zero = 0;
+	if (!start_in_transfer(common, bh))
+		/* Don't know what to do if common->fsg is NULL */
+		return;
+
+	common->next_buffhd_to_fill = bh->next;
+	return;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Check whether the command is properly formed and whether its data size
+ * and direction agree with the values we already have.
+ */
+static int check_command(struct fsg_common *common, int cmnd_size,
+			 enum data_direction data_dir, unsigned int mask,
+			 int needs_medium, const char *name)
+{
+	int			i;
+	unsigned int		lun = common->cmnd[1] >> 5;
+	static const char	dirletter[4] = {'u', 'o', 'i', 'n'};
+	char			hdlen[20];
+	struct fsg_lun		*curlun;
+
+	hdlen[0] = 0;
+	if (common->data_dir != DATA_DIR_UNKNOWN)
+		sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir],
+			common->data_size);
+	VDBG(common, "SCSI command: %s;  Dc=%d, D%c=%u;  Hc=%d%s\n",
+	     name, cmnd_size, dirletter[(int) data_dir],
+	     common->data_size_from_cmnd, common->cmnd_size, hdlen);
+
+	/*
+	 * We can't reply at all until we know the correct data direction
+	 * and size.
+	 */
+	if (common->data_size_from_cmnd == 0)
+		data_dir = DATA_DIR_NONE;
+	if (common->data_size < common->data_size_from_cmnd) {
+		/*
+		 * Host data size < Device data size is a phase error.
+		 * Carry out the command, but only transfer as much as
+		 * we are allowed.
+		 */
+		common->data_size_from_cmnd = common->data_size;
+		common->phase_error = 1;
+	}
+	common->residue = common->data_size;
+	common->usb_amount_left = common->data_size;
+
+	/* Conflicting data directions is a phase error */
+	if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) {
+		common->phase_error = 1;
+		return -EINVAL;
+	}
+
+	/* Verify the length of the command itself */
+	if (cmnd_size != common->cmnd_size) {
+
+		/*
+		 * Special case workaround: There are plenty of buggy SCSI
+		 * implementations. Many have issues with cbw->Length
+		 * field passing a wrong command size. For those cases we
+		 * always try to work around the problem by using the length
+		 * sent by the host side provided it is at least as large
+		 * as the correct command length.
+		 * Examples of such cases would be MS-Windows, which issues
+		 * REQUEST SENSE with cbw->Length == 12 where it should
+		 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
+		 * REQUEST SENSE with cbw->Length == 10 where it should
+		 * be 6 as well.
+		 */
+		if (cmnd_size <= common->cmnd_size) {
+			DBG(common, "%s is buggy! Expected length %d "
+			    "but we got %d\n", name,
+			    cmnd_size, common->cmnd_size);
+			cmnd_size = common->cmnd_size;
+		} else {
+			common->phase_error = 1;
+			return -EINVAL;
+		}
+	}
+
+	/* Check that the LUN values are consistent */
+	if (common->lun != lun)
+		DBG(common, "using LUN %u from CBW, not LUN %u from CDB\n",
+		    common->lun, lun);
+
+	/* Check the LUN */
+	curlun = common->curlun;
+	if (curlun) {
+		if (common->cmnd[0] != REQUEST_SENSE) {
+			curlun->sense_data = SS_NO_SENSE;
+			curlun->sense_data_info = 0;
+			curlun->info_valid = 0;
+		}
+	} else {
+		common->bad_lun_okay = 0;
+
+		/*
+		 * INQUIRY and REQUEST SENSE commands are explicitly allowed
+		 * to use unsupported LUNs; all others may not.
+		 */
+		if (common->cmnd[0] != INQUIRY &&
+		    common->cmnd[0] != REQUEST_SENSE) {
+			DBG(common, "unsupported LUN %u\n", common->lun);
+			return -EINVAL;
+		}
+	}
+
+	/*
+	 * If a unit attention condition exists, only INQUIRY and
+	 * REQUEST SENSE commands are allowed; anything else must fail.
+	 */
+	if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
+	    common->cmnd[0] != INQUIRY &&
+	    common->cmnd[0] != REQUEST_SENSE) {
+		curlun->sense_data = curlun->unit_attention_data;
+		curlun->unit_attention_data = SS_NO_SENSE;
+		return -EINVAL;
+	}
+
+	/* Check that only command bytes listed in the mask are non-zero */
+	common->cmnd[1] &= 0x1f;			/* Mask away the LUN */
+	for (i = 1; i < cmnd_size; ++i) {
+		if (common->cmnd[i] && !(mask & (1 << i))) {
+			if (curlun)
+				curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+			return -EINVAL;
+		}
+	}
+
+	/* If the medium isn't mounted and the command needs to access
+	 * it, return an error. */
+	if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
+		curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* wrapper of check_command for data size in blocks handling */
+static int check_command_size_in_blocks(struct fsg_common *common,
+		int cmnd_size, enum data_direction data_dir,
+		unsigned int mask, int needs_medium, const char *name)
+{
+	if (common->curlun)
+		common->data_size_from_cmnd <<= common->curlun->blkbits;
+	return check_command(common, cmnd_size, data_dir,
+			mask, needs_medium, name);
+}
+
+static int do_scsi_command(struct fsg_common *common)
+{
+	struct fsg_buffhd	*bh;
+	int			rc;
+	int			reply = -EINVAL;
+	int			i;
+	static char		unknown[16];
+
+	dump_cdb(common);
+
+	/* Wait for the next buffer to become available for data or status */
+	bh = common->next_buffhd_to_fill;
+	common->next_buffhd_to_drain = bh;
+	rc = sleep_thread(common, false, bh);
+	if (rc)
+		return rc;
+
+	common->phase_error = 0;
+	common->short_packet_received = 0;
+
+	down_read(&common->filesem);	/* We're using the backing file */
+	switch (common->cmnd[0]) {
+
+	case INQUIRY:
+		common->data_size_from_cmnd = common->cmnd[4];
+		reply = check_command(common, 6, DATA_DIR_TO_HOST,
+				      (1<<4), 0,
+				      "INQUIRY");
+		if (reply == 0)
+			reply = do_inquiry(common, bh);
+		break;
+
+	case MODE_SELECT:
+		common->data_size_from_cmnd = common->cmnd[4];
+		reply = check_command(common, 6, DATA_DIR_FROM_HOST,
+				      (1<<1) | (1<<4), 0,
+				      "MODE SELECT(6)");
+		if (reply == 0)
+			reply = do_mode_select(common, bh);
+		break;
+
+	case MODE_SELECT_10:
+		common->data_size_from_cmnd =
+			get_unaligned_be16(&common->cmnd[7]);
+		reply = check_command(common, 10, DATA_DIR_FROM_HOST,
+				      (1<<1) | (3<<7), 0,
+				      "MODE SELECT(10)");
+		if (reply == 0)
+			reply = do_mode_select(common, bh);
+		break;
+
+	case MODE_SENSE:
+		common->data_size_from_cmnd = common->cmnd[4];
+		reply = check_command(common, 6, DATA_DIR_TO_HOST,
+				      (1<<1) | (1<<2) | (1<<4), 0,
+				      "MODE SENSE(6)");
+		if (reply == 0)
+			reply = do_mode_sense(common, bh);
+		break;
+
+	case MODE_SENSE_10:
+		common->data_size_from_cmnd =
+			get_unaligned_be16(&common->cmnd[7]);
+		reply = check_command(common, 10, DATA_DIR_TO_HOST,
+				      (1<<1) | (1<<2) | (3<<7), 0,
+				      "MODE SENSE(10)");
+		if (reply == 0)
+			reply = do_mode_sense(common, bh);
+		break;
+
+	case ALLOW_MEDIUM_REMOVAL:
+		common->data_size_from_cmnd = 0;
+		reply = check_command(common, 6, DATA_DIR_NONE,
+				      (1<<4), 0,
+				      "PREVENT-ALLOW MEDIUM REMOVAL");
+		if (reply == 0)
+			reply = do_prevent_allow(common);
+		break;
+
+	case READ_6:
+		i = common->cmnd[4];
+		common->data_size_from_cmnd = (i == 0) ? 256 : i;
+		reply = check_command_size_in_blocks(common, 6,
+				      DATA_DIR_TO_HOST,
+				      (7<<1) | (1<<4), 1,
+				      "READ(6)");
+		if (reply == 0)
+			reply = do_read(common);
+		break;
+
+	case READ_10:
+		common->data_size_from_cmnd =
+				get_unaligned_be16(&common->cmnd[7]);
+		reply = check_command_size_in_blocks(common, 10,
+				      DATA_DIR_TO_HOST,
+				      (1<<1) | (0xf<<2) | (3<<7), 1,
+				      "READ(10)");
+		if (reply == 0)
+			reply = do_read(common);
+		break;
+
+	case READ_12:
+		common->data_size_from_cmnd =
+				get_unaligned_be32(&common->cmnd[6]);
+		reply = check_command_size_in_blocks(common, 12,
+				      DATA_DIR_TO_HOST,
+				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
+				      "READ(12)");
+		if (reply == 0)
+			reply = do_read(common);
+		break;
+
+	case READ_16:
+		common->data_size_from_cmnd =
+				get_unaligned_be32(&common->cmnd[10]);
+		reply = check_command_size_in_blocks(common, 16,
+				      DATA_DIR_TO_HOST,
+				      (1<<1) | (0xff<<2) | (0xf<<10), 1,
+				      "READ(16)");
+		if (reply == 0)
+			reply = do_read(common);
+		break;
+
+	case READ_CAPACITY:
+		common->data_size_from_cmnd = 8;
+		reply = check_command(common, 10, DATA_DIR_TO_HOST,
+				      (0xf<<2) | (1<<8), 1,
+				      "READ CAPACITY");
+		if (reply == 0)
+			reply = do_read_capacity(common, bh);
+		break;
+
+	case READ_HEADER:
+		if (!common->curlun || !common->curlun->cdrom)
+			goto unknown_cmnd;
+		common->data_size_from_cmnd =
+			get_unaligned_be16(&common->cmnd[7]);
+		reply = check_command(common, 10, DATA_DIR_TO_HOST,
+				      (3<<7) | (0x1f<<1), 1,
+				      "READ HEADER");
+		if (reply == 0)
+			reply = do_read_header(common, bh);
+		break;
+
+	case READ_TOC:
+		if (!common->curlun || !common->curlun->cdrom)
+			goto unknown_cmnd;
+		common->data_size_from_cmnd =
+			get_unaligned_be16(&common->cmnd[7]);
+		reply = check_command(common, 10, DATA_DIR_TO_HOST,
+				      (0xf<<6) | (3<<1), 1,
+				      "READ TOC");
+		if (reply == 0)
+			reply = do_read_toc(common, bh);
+		break;
+
+	case READ_FORMAT_CAPACITIES:
+		common->data_size_from_cmnd =
+			get_unaligned_be16(&common->cmnd[7]);
+		reply = check_command(common, 10, DATA_DIR_TO_HOST,
+				      (3<<7), 1,
+				      "READ FORMAT CAPACITIES");
+		if (reply == 0)
+			reply = do_read_format_capacities(common, bh);
+		break;
+
+	case REQUEST_SENSE:
+		common->data_size_from_cmnd = common->cmnd[4];
+		reply = check_command(common, 6, DATA_DIR_TO_HOST,
+				      (1<<4), 0,
+				      "REQUEST SENSE");
+		if (reply == 0)
+			reply = do_request_sense(common, bh);
+		break;
+
+	case SERVICE_ACTION_IN_16:
+		switch (common->cmnd[1] & 0x1f) {
+
+		case SAI_READ_CAPACITY_16:
+			common->data_size_from_cmnd =
+				get_unaligned_be32(&common->cmnd[10]);
+			reply = check_command(common, 16, DATA_DIR_TO_HOST,
+					      (1<<1) | (0xff<<2) | (0xf<<10) |
+					      (1<<14), 1,
+					      "READ CAPACITY(16)");
+			if (reply == 0)
+				reply = do_read_capacity_16(common, bh);
+			break;
+
+		default:
+			goto unknown_cmnd;
+		}
+		break;
+
+	case START_STOP:
+		common->data_size_from_cmnd = 0;
+		reply = check_command(common, 6, DATA_DIR_NONE,
+				      (1<<1) | (1<<4), 0,
+				      "START-STOP UNIT");
+		if (reply == 0)
+			reply = do_start_stop(common);
+		break;
+
+	case SYNCHRONIZE_CACHE:
+		common->data_size_from_cmnd = 0;
+		reply = check_command(common, 10, DATA_DIR_NONE,
+				      (0xf<<2) | (3<<7), 1,
+				      "SYNCHRONIZE CACHE");
+		if (reply == 0)
+			reply = do_synchronize_cache(common);
+		break;
+
+	case TEST_UNIT_READY:
+		common->data_size_from_cmnd = 0;
+		reply = check_command(common, 6, DATA_DIR_NONE,
+				0, 1,
+				"TEST UNIT READY");
+		break;
+
+	/*
+	 * Although optional, this command is used by MS-Windows.  We
+	 * support a minimal version: BytChk must be 0.
+	 */
+	case VERIFY:
+		common->data_size_from_cmnd = 0;
+		reply = check_command(common, 10, DATA_DIR_NONE,
+				      (1<<1) | (0xf<<2) | (3<<7), 1,
+				      "VERIFY");
+		if (reply == 0)
+			reply = do_verify(common);
+		break;
+
+	case WRITE_6:
+		i = common->cmnd[4];
+		common->data_size_from_cmnd = (i == 0) ? 256 : i;
+		reply = check_command_size_in_blocks(common, 6,
+				      DATA_DIR_FROM_HOST,
+				      (7<<1) | (1<<4), 1,
+				      "WRITE(6)");
+		if (reply == 0)
+			reply = do_write(common);
+		break;
+
+	case WRITE_10:
+		common->data_size_from_cmnd =
+				get_unaligned_be16(&common->cmnd[7]);
+		reply = check_command_size_in_blocks(common, 10,
+				      DATA_DIR_FROM_HOST,
+				      (1<<1) | (0xf<<2) | (3<<7), 1,
+				      "WRITE(10)");
+		if (reply == 0)
+			reply = do_write(common);
+		break;
+
+	case WRITE_12:
+		common->data_size_from_cmnd =
+				get_unaligned_be32(&common->cmnd[6]);
+		reply = check_command_size_in_blocks(common, 12,
+				      DATA_DIR_FROM_HOST,
+				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
+				      "WRITE(12)");
+		if (reply == 0)
+			reply = do_write(common);
+		break;
+
+	case WRITE_16:
+		common->data_size_from_cmnd =
+				get_unaligned_be32(&common->cmnd[10]);
+		reply = check_command_size_in_blocks(common, 16,
+				      DATA_DIR_FROM_HOST,
+				      (1<<1) | (0xff<<2) | (0xf<<10), 1,
+				      "WRITE(16)");
+		if (reply == 0)
+			reply = do_write(common);
+		break;
+
+	/*
+	 * Some mandatory commands that we recognize but don't implement.
+	 * They don't mean much in this setting.  It's left as an exercise
+	 * for anyone interested to implement RESERVE and RELEASE in terms
+	 * of Posix locks.
+	 */
+	case FORMAT_UNIT:
+	case RELEASE:
+	case RESERVE:
+	case SEND_DIAGNOSTIC:
+
+	default:
+unknown_cmnd:
+		common->data_size_from_cmnd = 0;
+		sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
+		reply = check_command(common, common->cmnd_size,
+				      DATA_DIR_UNKNOWN, ~0, 0, unknown);
+		if (reply == 0) {
+			common->curlun->sense_data = SS_INVALID_COMMAND;
+			reply = -EINVAL;
+		}
+		break;
+	}
+	up_read(&common->filesem);
+
+	if (reply == -EINTR || signal_pending(current))
+		return -EINTR;
+
+	/* Set up the single reply buffer for finish_reply() */
+	if (reply == -EINVAL)
+		reply = 0;		/* Error reply length */
+	if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) {
+		reply = min((u32)reply, common->data_size_from_cmnd);
+		bh->inreq->length = reply;
+		bh->state = BUF_STATE_FULL;
+		common->residue -= reply;
+	}				/* Otherwise it's already set */
+
+	return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{
+	struct usb_request	*req = bh->outreq;
+	struct bulk_cb_wrap	*cbw = req->buf;
+	struct fsg_common	*common = fsg->common;
+
+	/* Was this a real packet?  Should it be ignored? */
+	if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
+		return -EINVAL;
+
+	/* Is the CBW valid? */
+	if (req->actual != US_BULK_CB_WRAP_LEN ||
+			cbw->Signature != cpu_to_le32(
+				US_BULK_CB_SIGN)) {
+		DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
+				req->actual,
+				le32_to_cpu(cbw->Signature));
+
+		/*
+		 * The Bulk-only spec says we MUST stall the IN endpoint
+		 * (6.6.1), so it's unavoidable.  It also says we must
+		 * retain this state until the next reset, but there's
+		 * no way to tell the controller driver it should ignore
+		 * Clear-Feature(HALT) requests.
+		 *
+		 * We aren't required to halt the OUT endpoint; instead
+		 * we can simply accept and discard any data received
+		 * until the next reset.
+		 */
+		wedge_bulk_in_endpoint(fsg);
+		set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
+		return -EINVAL;
+	}
+
+	/* Is the CBW meaningful? */
+	if (cbw->Lun >= ARRAY_SIZE(common->luns) ||
+	    cbw->Flags & ~US_BULK_FLAG_IN || cbw->Length <= 0 ||
+	    cbw->Length > MAX_COMMAND_SIZE) {
+		DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
+				"cmdlen %u\n",
+				cbw->Lun, cbw->Flags, cbw->Length);
+
+		/*
+		 * We can do anything we want here, so let's stall the
+		 * bulk pipes if we are allowed to.
+		 */
+		if (common->can_stall) {
+			fsg_set_halt(fsg, fsg->bulk_out);
+			halt_bulk_in_endpoint(fsg);
+		}
+		return -EINVAL;
+	}
+
+	/* Save the command for later */
+	common->cmnd_size = cbw->Length;
+	memcpy(common->cmnd, cbw->CDB, common->cmnd_size);
+	if (cbw->Flags & US_BULK_FLAG_IN)
+		common->data_dir = DATA_DIR_TO_HOST;
+	else
+		common->data_dir = DATA_DIR_FROM_HOST;
+	common->data_size = le32_to_cpu(cbw->DataTransferLength);
+	if (common->data_size == 0)
+		common->data_dir = DATA_DIR_NONE;
+	common->lun = cbw->Lun;
+	if (common->lun < ARRAY_SIZE(common->luns))
+		common->curlun = common->luns[common->lun];
+	else
+		common->curlun = NULL;
+	common->tag = cbw->Tag;
+	return 0;
+}
+
+static int get_next_command(struct fsg_common *common)
+{
+	struct fsg_buffhd	*bh;
+	int			rc = 0;
+
+	/* Wait for the next buffer to become available */
+	bh = common->next_buffhd_to_fill;
+	rc = sleep_thread(common, true, bh);
+	if (rc)
+		return rc;
+
+	/* Queue a request to read a Bulk-only CBW */
+	set_bulk_out_req_length(common, bh, US_BULK_CB_WRAP_LEN);
+	if (!start_out_transfer(common, bh))
+		/* Don't know what to do if common->fsg is NULL */
+		return -EIO;
+
+	/*
+	 * We will drain the buffer in software, which means we
+	 * can reuse it for the next filling.  No need to advance
+	 * next_buffhd_to_fill.
+	 */
+
+	/* Wait for the CBW to arrive */
+	rc = sleep_thread(common, true, bh);
+	if (rc)
+		return rc;
+
+	rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO;
+	bh->state = BUF_STATE_EMPTY;
+
+	return rc;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int alloc_request(struct fsg_common *common, struct usb_ep *ep,
+		struct usb_request **preq)
+{
+	*preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
+	if (*preq)
+		return 0;
+	ERROR(common, "can't allocate request for %s\n", ep->name);
+	return -ENOMEM;
+}
+
+/* Reset interface setting and re-init endpoint state (toggle etc). */
+static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
+{
+	struct fsg_dev *fsg;
+	int i, rc = 0;
+
+	if (common->running)
+		DBG(common, "reset interface\n");
+
+reset:
+	/* Deallocate the requests */
+	if (common->fsg) {
+		fsg = common->fsg;
+
+		for (i = 0; i < common->fsg_num_buffers; ++i) {
+			struct fsg_buffhd *bh = &common->buffhds[i];
+
+			if (bh->inreq) {
+				usb_ep_free_request(fsg->bulk_in, bh->inreq);
+				bh->inreq = NULL;
+			}
+			if (bh->outreq) {
+				usb_ep_free_request(fsg->bulk_out, bh->outreq);
+				bh->outreq = NULL;
+			}
+		}
+
+		/* Disable the endpoints */
+		if (fsg->bulk_in_enabled) {
+			usb_ep_disable(fsg->bulk_in);
+			fsg->bulk_in_enabled = 0;
+		}
+		if (fsg->bulk_out_enabled) {
+			usb_ep_disable(fsg->bulk_out);
+			fsg->bulk_out_enabled = 0;
+		}
+
+		common->fsg = NULL;
+		wake_up(&common->fsg_wait);
+	}
+
+	common->running = 0;
+	if (!new_fsg || rc)
+		return rc;
+
+	common->fsg = new_fsg;
+	fsg = common->fsg;
+
+	/* Enable the endpoints */
+	rc = config_ep_by_speed(common->gadget, &(fsg->function), fsg->bulk_in);
+	if (rc)
+		goto reset;
+	rc = usb_ep_enable(fsg->bulk_in);
+	if (rc)
+		goto reset;
+	fsg->bulk_in->driver_data = common;
+	fsg->bulk_in_enabled = 1;
+
+	rc = config_ep_by_speed(common->gadget, &(fsg->function),
+				fsg->bulk_out);
+	if (rc)
+		goto reset;
+	rc = usb_ep_enable(fsg->bulk_out);
+	if (rc)
+		goto reset;
+	fsg->bulk_out->driver_data = common;
+	fsg->bulk_out_enabled = 1;
+	common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc);
+	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
+
+	/* Allocate the requests */
+	for (i = 0; i < common->fsg_num_buffers; ++i) {
+		struct fsg_buffhd	*bh = &common->buffhds[i];
+
+		rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
+		if (rc)
+			goto reset;
+		rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
+		if (rc)
+			goto reset;
+		bh->inreq->buf = bh->outreq->buf = bh->buf;
+		bh->inreq->context = bh->outreq->context = bh;
+		bh->inreq->complete = bulk_in_complete;
+		bh->outreq->complete = bulk_out_complete;
+	}
+
+	common->running = 1;
+	for (i = 0; i < ARRAY_SIZE(common->luns); ++i)
+		if (common->luns[i])
+			common->luns[i]->unit_attention_data =
+				SS_RESET_OCCURRED;
+	return rc;
+}
+
+
+/****************************** ALT CONFIGS ******************************/
+
+static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct fsg_dev *fsg = fsg_from_func(f);
+
+	__raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, fsg);
+	return USB_GADGET_DELAYED_STATUS;
+}
+
+static void fsg_disable(struct usb_function *f)
+{
+	struct fsg_dev *fsg = fsg_from_func(f);
+
+	/* Disable the endpoints */
+	if (fsg->bulk_in_enabled) {
+		usb_ep_disable(fsg->bulk_in);
+		fsg->bulk_in_enabled = 0;
+	}
+	if (fsg->bulk_out_enabled) {
+		usb_ep_disable(fsg->bulk_out);
+		fsg->bulk_out_enabled = 0;
+	}
+
+	__raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static void handle_exception(struct fsg_common *common)
+{
+	int			i;
+	struct fsg_buffhd	*bh;
+	enum fsg_state		old_state;
+	struct fsg_lun		*curlun;
+	unsigned int		exception_req_tag;
+	struct fsg_dev		*new_fsg;
+
+	/*
+	 * Clear the existing signals.  Anything but SIGUSR1 is converted
+	 * into a high-priority EXIT exception.
+	 */
+	for (;;) {
+		int sig = kernel_dequeue_signal();
+		if (!sig)
+			break;
+		if (sig != SIGUSR1) {
+			spin_lock_irq(&common->lock);
+			if (common->state < FSG_STATE_EXIT)
+				DBG(common, "Main thread exiting on signal\n");
+			common->state = FSG_STATE_EXIT;
+			spin_unlock_irq(&common->lock);
+		}
+	}
+
+	/* Cancel all the pending transfers */
+	if (likely(common->fsg)) {
+		for (i = 0; i < common->fsg_num_buffers; ++i) {
+			bh = &common->buffhds[i];
+			if (bh->state == BUF_STATE_SENDING)
+				usb_ep_dequeue(common->fsg->bulk_in, bh->inreq);
+			if (bh->state == BUF_STATE_RECEIVING)
+				usb_ep_dequeue(common->fsg->bulk_out,
+					       bh->outreq);
+
+			/* Wait for a transfer to become idle */
+			if (sleep_thread(common, false, bh))
+				return;
+		}
+
+		/* Clear out the controller's fifos */
+		if (common->fsg->bulk_in_enabled)
+			usb_ep_fifo_flush(common->fsg->bulk_in);
+		if (common->fsg->bulk_out_enabled)
+			usb_ep_fifo_flush(common->fsg->bulk_out);
+	}
+
+	/*
+	 * Reset the I/O buffer states and pointers, the SCSI
+	 * state, and the exception.  Then invoke the handler.
+	 */
+	spin_lock_irq(&common->lock);
+
+	for (i = 0; i < common->fsg_num_buffers; ++i) {
+		bh = &common->buffhds[i];
+		bh->state = BUF_STATE_EMPTY;
+	}
+	common->next_buffhd_to_fill = &common->buffhds[0];
+	common->next_buffhd_to_drain = &common->buffhds[0];
+	exception_req_tag = common->exception_req_tag;
+	new_fsg = common->exception_arg;
+	old_state = common->state;
+	common->state = FSG_STATE_NORMAL;
+
+	if (old_state != FSG_STATE_ABORT_BULK_OUT) {
+		for (i = 0; i < ARRAY_SIZE(common->luns); ++i) {
+			curlun = common->luns[i];
+			if (!curlun)
+				continue;
+			curlun->prevent_medium_removal = 0;
+			curlun->sense_data = SS_NO_SENSE;
+			curlun->unit_attention_data = SS_NO_SENSE;
+			curlun->sense_data_info = 0;
+			curlun->info_valid = 0;
+		}
+	}
+	spin_unlock_irq(&common->lock);
+
+	/* Carry out any extra actions required for the exception */
+	switch (old_state) {
+	case FSG_STATE_NORMAL:
+		break;
+
+	case FSG_STATE_ABORT_BULK_OUT:
+		send_status(common);
+		break;
+
+	case FSG_STATE_PROTOCOL_RESET:
+		/*
+		 * In case we were forced against our will to halt a
+		 * bulk endpoint, clear the halt now.  (The SuperH UDC
+		 * requires this.)
+		 */
+		if (!fsg_is_set(common))
+			break;
+		if (test_and_clear_bit(IGNORE_BULK_OUT,
+				       &common->fsg->atomic_bitflags))
+			usb_ep_clear_halt(common->fsg->bulk_in);
+
+		if (common->ep0_req_tag == exception_req_tag)
+			ep0_queue(common);	/* Complete the status stage */
+
+		/*
+		 * Technically this should go here, but it would only be
+		 * a waste of time.  Ditto for the INTERFACE_CHANGE and
+		 * CONFIG_CHANGE cases.
+		 */
+		/* for (i = 0; i < common->ARRAY_SIZE(common->luns); ++i) */
+		/*	if (common->luns[i]) */
+		/*		common->luns[i]->unit_attention_data = */
+		/*			SS_RESET_OCCURRED;  */
+		break;
+
+	case FSG_STATE_CONFIG_CHANGE:
+		do_set_interface(common, new_fsg);
+		if (new_fsg)
+			usb_composite_setup_continue(common->cdev);
+		break;
+
+	case FSG_STATE_EXIT:
+		do_set_interface(common, NULL);		/* Free resources */
+		spin_lock_irq(&common->lock);
+		common->state = FSG_STATE_TERMINATED;	/* Stop the thread */
+		spin_unlock_irq(&common->lock);
+		break;
+
+	case FSG_STATE_TERMINATED:
+		break;
+	}
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int fsg_main_thread(void *common_)
+{
+	struct fsg_common	*common = common_;
+	int			i;
+
+	/*
+	 * Allow the thread to be killed by a signal, but set the signal mask
+	 * to block everything but INT, TERM, KILL, and USR1.
+	 */
+	allow_signal(SIGINT);
+	allow_signal(SIGTERM);
+	allow_signal(SIGKILL);
+	allow_signal(SIGUSR1);
+
+	/* Allow the thread to be frozen */
+	set_freezable();
+
+	/* The main loop */
+	while (common->state != FSG_STATE_TERMINATED) {
+		if (exception_in_progress(common) || signal_pending(current)) {
+			handle_exception(common);
+			continue;
+		}
+
+		if (!common->running) {
+			sleep_thread(common, true, NULL);
+			continue;
+		}
+
+		if (get_next_command(common) || exception_in_progress(common))
+			continue;
+		if (do_scsi_command(common) || exception_in_progress(common))
+			continue;
+		if (finish_reply(common) || exception_in_progress(common))
+			continue;
+		send_status(common);
+	}
+
+	spin_lock_irq(&common->lock);
+	common->thread_task = NULL;
+	spin_unlock_irq(&common->lock);
+
+	/* Eject media from all LUNs */
+
+	down_write(&common->filesem);
+	for (i = 0; i < ARRAY_SIZE(common->luns); i++) {
+		struct fsg_lun *curlun = common->luns[i];
+
+		if (curlun && fsg_lun_is_open(curlun))
+			fsg_lun_close(curlun);
+	}
+	up_write(&common->filesem);
+
+	/* Let fsg_unbind() know the thread has exited */
+	kthread_complete_and_exit(&common->thread_notifier, 0);
+}
+
+
+/*************************** DEVICE ATTRIBUTES ***************************/
+
+static ssize_t ro_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
+
+	return fsg_show_ro(curlun, buf);
+}
+
+static ssize_t nofua_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
+
+	return fsg_show_nofua(curlun, buf);
+}
+
+static ssize_t file_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
+	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
+
+	return fsg_show_file(curlun, filesem, buf);
+}
+
+static ssize_t ro_store(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
+	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
+
+	return fsg_store_ro(curlun, filesem, buf, count);
+}
+
+static ssize_t nofua_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
+
+	return fsg_store_nofua(curlun, buf, count);
+}
+
+static ssize_t file_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
+	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
+
+	return fsg_store_file(curlun, filesem, buf, count);
+}
+
+static ssize_t forced_eject_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
+	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
+
+	return fsg_store_forced_eject(curlun, filesem, buf, count);
+}
+
+static DEVICE_ATTR_RW(nofua);
+static DEVICE_ATTR_WO(forced_eject);
+
+/*
+ * Mode of the ro and file attribute files will be overridden in
+ * fsg_lun_dev_is_visible() depending on if this is a cdrom, or if it is a
+ * removable device.
+ */
+static DEVICE_ATTR_RW(ro);
+static DEVICE_ATTR_RW(file);
+
+/****************************** FSG COMMON ******************************/
+
+static void fsg_lun_release(struct device *dev)
+{
+	/* Nothing needs to be done */
+}
+
+static struct fsg_common *fsg_common_setup(struct fsg_common *common)
+{
+	if (!common) {
+		common = kzalloc(sizeof(*common), GFP_KERNEL);
+		if (!common)
+			return ERR_PTR(-ENOMEM);
+		common->free_storage_on_release = 1;
+	} else {
+		common->free_storage_on_release = 0;
+	}
+	init_rwsem(&common->filesem);
+	spin_lock_init(&common->lock);
+	init_completion(&common->thread_notifier);
+	init_waitqueue_head(&common->io_wait);
+	init_waitqueue_head(&common->fsg_wait);
+	common->state = FSG_STATE_TERMINATED;
+	memset(common->luns, 0, sizeof(common->luns));
+
+	return common;
+}
+
+void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs)
+{
+	common->sysfs = sysfs;
+}
+EXPORT_SYMBOL_GPL(fsg_common_set_sysfs);
+
+static void _fsg_common_free_buffers(struct fsg_buffhd *buffhds, unsigned n)
+{
+	if (buffhds) {
+		struct fsg_buffhd *bh = buffhds;
+		while (n--) {
+			kfree(bh->buf);
+			++bh;
+		}
+		kfree(buffhds);
+	}
+}
+
+int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n)
+{
+	struct fsg_buffhd *bh, *buffhds;
+	int i;
+
+	buffhds = kcalloc(n, sizeof(*buffhds), GFP_KERNEL);
+	if (!buffhds)
+		return -ENOMEM;
+
+	/* Data buffers cyclic list */
+	bh = buffhds;
+	i = n;
+	goto buffhds_first_it;
+	do {
+		bh->next = bh + 1;
+		++bh;
+buffhds_first_it:
+		bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL);
+		if (unlikely(!bh->buf))
+			goto error_release;
+	} while (--i);
+	bh->next = buffhds;
+
+	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
+	common->fsg_num_buffers = n;
+	common->buffhds = buffhds;
+
+	return 0;
+
+error_release:
+	/*
+	 * "buf"s pointed to by heads after n - i are NULL
+	 * so releasing them won't hurt
+	 */
+	_fsg_common_free_buffers(buffhds, n);
+
+	return -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers);
+
+void fsg_common_remove_lun(struct fsg_lun *lun)
+{
+	if (device_is_registered(&lun->dev))
+		device_unregister(&lun->dev);
+	fsg_lun_close(lun);
+	kfree(lun);
+}
+EXPORT_SYMBOL_GPL(fsg_common_remove_lun);
+
+static void _fsg_common_remove_luns(struct fsg_common *common, int n)
+{
+	int i;
+
+	for (i = 0; i < n; ++i)
+		if (common->luns[i]) {
+			fsg_common_remove_lun(common->luns[i]);
+			common->luns[i] = NULL;
+		}
+}
+
+void fsg_common_remove_luns(struct fsg_common *common)
+{
+	_fsg_common_remove_luns(common, ARRAY_SIZE(common->luns));
+}
+EXPORT_SYMBOL_GPL(fsg_common_remove_luns);
+
+void fsg_common_free_buffers(struct fsg_common *common)
+{
+	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
+	common->buffhds = NULL;
+}
+EXPORT_SYMBOL_GPL(fsg_common_free_buffers);
+
+int fsg_common_set_cdev(struct fsg_common *common,
+			 struct usb_composite_dev *cdev, bool can_stall)
+{
+	struct usb_string *us;
+
+	common->gadget = cdev->gadget;
+	common->ep0 = cdev->gadget->ep0;
+	common->ep0req = cdev->req;
+	common->cdev = cdev;
+
+	us = usb_gstrings_attach(cdev, fsg_strings_array,
+				 ARRAY_SIZE(fsg_strings));
+	if (IS_ERR(us))
+		return PTR_ERR(us);
+
+	fsg_intf_desc.iInterface = us[FSG_STRING_INTERFACE].id;
+
+	/*
+	 * Some peripheral controllers are known not to be able to
+	 * halt bulk endpoints correctly.  If one of them is present,
+	 * disable stalls.
+	 */
+	common->can_stall = can_stall &&
+			gadget_is_stall_supported(common->gadget);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fsg_common_set_cdev);
+
+static struct attribute *fsg_lun_dev_attrs[] = {
+	&dev_attr_ro.attr,
+	&dev_attr_file.attr,
+	&dev_attr_nofua.attr,
+	&dev_attr_forced_eject.attr,
+	NULL
+};
+
+static umode_t fsg_lun_dev_is_visible(struct kobject *kobj,
+				      struct attribute *attr, int idx)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct fsg_lun *lun = fsg_lun_from_dev(dev);
+
+	if (attr == &dev_attr_ro.attr)
+		return lun->cdrom ? S_IRUGO : (S_IWUSR | S_IRUGO);
+	if (attr == &dev_attr_file.attr)
+		return lun->removable ? (S_IWUSR | S_IRUGO) : S_IRUGO;
+	return attr->mode;
+}
+
+static const struct attribute_group fsg_lun_dev_group = {
+	.attrs = fsg_lun_dev_attrs,
+	.is_visible = fsg_lun_dev_is_visible,
+};
+
+static const struct attribute_group *fsg_lun_dev_groups[] = {
+	&fsg_lun_dev_group,
+	NULL
+};
+
+int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
+			  unsigned int id, const char *name,
+			  const char **name_pfx)
+{
+	struct fsg_lun *lun;
+	char *pathbuf, *p;
+	int rc = -ENOMEM;
+
+	if (id >= ARRAY_SIZE(common->luns))
+		return -ENODEV;
+
+	if (common->luns[id])
+		return -EBUSY;
+
+	if (!cfg->filename && !cfg->removable) {
+		pr_err("no file given for LUN%d\n", id);
+		return -EINVAL;
+	}
+
+	lun = kzalloc(sizeof(*lun), GFP_KERNEL);
+	if (!lun)
+		return -ENOMEM;
+
+	lun->name_pfx = name_pfx;
+
+	lun->cdrom = !!cfg->cdrom;
+	lun->ro = cfg->cdrom || cfg->ro;
+	lun->initially_ro = lun->ro;
+	lun->removable = !!cfg->removable;
+
+	if (!common->sysfs) {
+		/* we DON'T own the name!*/
+		lun->name = name;
+	} else {
+		lun->dev.release = fsg_lun_release;
+		lun->dev.parent = &common->gadget->dev;
+		lun->dev.groups = fsg_lun_dev_groups;
+		dev_set_drvdata(&lun->dev, &common->filesem);
+		dev_set_name(&lun->dev, "%s", name);
+		lun->name = dev_name(&lun->dev);
+
+		rc = device_register(&lun->dev);
+		if (rc) {
+			pr_info("failed to register LUN%d: %d\n", id, rc);
+			put_device(&lun->dev);
+			goto error_sysfs;
+		}
+	}
+
+	common->luns[id] = lun;
+
+	if (cfg->filename) {
+		rc = fsg_lun_open(lun, cfg->filename);
+		if (rc)
+			goto error_lun;
+	}
+
+	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
+	p = "(no medium)";
+	if (fsg_lun_is_open(lun)) {
+		p = "(error)";
+		if (pathbuf) {
+			p = file_path(lun->filp, pathbuf, PATH_MAX);
+			if (IS_ERR(p))
+				p = "(error)";
+		}
+	}
+	pr_info("LUN: %s%s%sfile: %s\n",
+	      lun->removable ? "removable " : "",
+	      lun->ro ? "read only " : "",
+	      lun->cdrom ? "CD-ROM " : "",
+	      p);
+	kfree(pathbuf);
+
+	return 0;
+
+error_lun:
+	if (device_is_registered(&lun->dev))
+		device_unregister(&lun->dev);
+	fsg_lun_close(lun);
+	common->luns[id] = NULL;
+error_sysfs:
+	kfree(lun);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(fsg_common_create_lun);
+
+int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg)
+{
+	char buf[8]; /* enough for 100000000 different numbers, decimal */
+	int i, rc;
+
+	fsg_common_remove_luns(common);
+
+	for (i = 0; i < cfg->nluns; ++i) {
+		snprintf(buf, sizeof(buf), "lun%d", i);
+		rc = fsg_common_create_lun(common, &cfg->luns[i], i, buf, NULL);
+		if (rc)
+			goto fail;
+	}
+
+	pr_info("Number of LUNs=%d\n", cfg->nluns);
+
+	return 0;
+
+fail:
+	_fsg_common_remove_luns(common, i);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(fsg_common_create_luns);
+
+void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
+				   const char *pn)
+{
+	int i;
+
+	/* Prepare inquiryString */
+	i = get_default_bcdDevice();
+	snprintf(common->inquiry_string, sizeof(common->inquiry_string),
+		 "%-8s%-16s%04x", vn ?: "Linux",
+		 /* Assume product name dependent on the first LUN */
+		 pn ?: ((*common->luns)->cdrom
+		     ? "File-CD Gadget"
+		     : "File-Stor Gadget"),
+		 i);
+}
+EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string);
+
+static void fsg_common_release(struct fsg_common *common)
+{
+	int i;
+
+	/* If the thread isn't already dead, tell it to exit now */
+	if (common->state != FSG_STATE_TERMINATED) {
+		raise_exception(common, FSG_STATE_EXIT);
+		wait_for_completion(&common->thread_notifier);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(common->luns); ++i) {
+		struct fsg_lun *lun = common->luns[i];
+		if (!lun)
+			continue;
+		fsg_lun_close(lun);
+		if (device_is_registered(&lun->dev))
+			device_unregister(&lun->dev);
+		kfree(lun);
+	}
+
+	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
+	if (common->free_storage_on_release)
+		kfree(common);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct fsg_dev		*fsg = fsg_from_func(f);
+	struct fsg_common	*common = fsg->common;
+	struct usb_gadget	*gadget = c->cdev->gadget;
+	int			i;
+	struct usb_ep		*ep;
+	unsigned		max_burst;
+	int			ret;
+	struct fsg_opts		*opts;
+
+	/* Don't allow to bind if we don't have at least one LUN */
+	ret = _fsg_common_get_max_lun(common);
+	if (ret < 0) {
+		pr_err("There should be at least one LUN.\n");
+		return -EINVAL;
+	}
+
+	opts = fsg_opts_from_func_inst(f->fi);
+	if (!opts->no_configfs) {
+		ret = fsg_common_set_cdev(fsg->common, c->cdev,
+					  fsg->common->can_stall);
+		if (ret)
+			return ret;
+		fsg_common_set_inquiry_string(fsg->common, NULL, NULL);
+	}
+
+	if (!common->thread_task) {
+		common->state = FSG_STATE_NORMAL;
+		common->thread_task =
+			kthread_create(fsg_main_thread, common, "file-storage");
+		if (IS_ERR(common->thread_task)) {
+			ret = PTR_ERR(common->thread_task);
+			common->thread_task = NULL;
+			common->state = FSG_STATE_TERMINATED;
+			return ret;
+		}
+		DBG(common, "I/O thread pid: %d\n",
+		    task_pid_nr(common->thread_task));
+		wake_up_process(common->thread_task);
+	}
+
+	fsg->gadget = gadget;
+
+	/* New interface */
+	i = usb_interface_id(c, f);
+	if (i < 0)
+		goto fail;
+	fsg_intf_desc.bInterfaceNumber = i;
+	fsg->interface_number = i;
+
+	/* Find all the endpoints we will use */
+	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
+	if (!ep)
+		goto autoconf_fail;
+	fsg->bulk_in = ep;
+
+	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
+	if (!ep)
+		goto autoconf_fail;
+	fsg->bulk_out = ep;
+
+	/* Assume endpoint addresses are the same for both speeds */
+	fsg_hs_bulk_in_desc.bEndpointAddress =
+		fsg_fs_bulk_in_desc.bEndpointAddress;
+	fsg_hs_bulk_out_desc.bEndpointAddress =
+		fsg_fs_bulk_out_desc.bEndpointAddress;
+
+	/* Calculate bMaxBurst, we know packet size is 1024 */
+	max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15);
+
+	fsg_ss_bulk_in_desc.bEndpointAddress =
+		fsg_fs_bulk_in_desc.bEndpointAddress;
+	fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
+
+	fsg_ss_bulk_out_desc.bEndpointAddress =
+		fsg_fs_bulk_out_desc.bEndpointAddress;
+	fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
+
+	ret = usb_assign_descriptors(f, fsg_fs_function, fsg_hs_function,
+			fsg_ss_function, fsg_ss_function);
+	if (ret)
+		goto autoconf_fail;
+
+	return 0;
+
+autoconf_fail:
+	ERROR(fsg, "unable to autoconfigure all endpoints\n");
+	i = -ENOTSUPP;
+fail:
+	/* terminate the thread */
+	if (fsg->common->state != FSG_STATE_TERMINATED) {
+		raise_exception(fsg->common, FSG_STATE_EXIT);
+		wait_for_completion(&fsg->common->thread_notifier);
+	}
+	return i;
+}
+
+/****************************** ALLOCATE FUNCTION *************************/
+
+static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct fsg_dev		*fsg = fsg_from_func(f);
+	struct fsg_common	*common = fsg->common;
+
+	DBG(fsg, "unbind\n");
+	if (fsg->common->fsg == fsg) {
+		__raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL);
+		/* FIXME: make interruptible or killable somehow? */
+		wait_event(common->fsg_wait, common->fsg != fsg);
+	}
+
+	usb_free_all_descriptors(&fsg->function);
+}
+
+static inline struct fsg_lun_opts *to_fsg_lun_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct fsg_lun_opts, group);
+}
+
+static inline struct fsg_opts *to_fsg_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct fsg_opts,
+			    func_inst.group);
+}
+
+static void fsg_lun_attr_release(struct config_item *item)
+{
+	struct fsg_lun_opts *lun_opts;
+
+	lun_opts = to_fsg_lun_opts(item);
+	kfree(lun_opts);
+}
+
+static struct configfs_item_operations fsg_lun_item_ops = {
+	.release		= fsg_lun_attr_release,
+};
+
+static ssize_t fsg_lun_opts_file_show(struct config_item *item, char *page)
+{
+	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
+	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
+
+	return fsg_show_file(opts->lun, &fsg_opts->common->filesem, page);
+}
+
+static ssize_t fsg_lun_opts_file_store(struct config_item *item,
+				       const char *page, size_t len)
+{
+	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
+	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
+
+	return fsg_store_file(opts->lun, &fsg_opts->common->filesem, page, len);
+}
+
+CONFIGFS_ATTR(fsg_lun_opts_, file);
+
+static ssize_t fsg_lun_opts_ro_show(struct config_item *item, char *page)
+{
+	return fsg_show_ro(to_fsg_lun_opts(item)->lun, page);
+}
+
+static ssize_t fsg_lun_opts_ro_store(struct config_item *item,
+				       const char *page, size_t len)
+{
+	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
+	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
+
+	return fsg_store_ro(opts->lun, &fsg_opts->common->filesem, page, len);
+}
+
+CONFIGFS_ATTR(fsg_lun_opts_, ro);
+
+static ssize_t fsg_lun_opts_removable_show(struct config_item *item,
+					   char *page)
+{
+	return fsg_show_removable(to_fsg_lun_opts(item)->lun, page);
+}
+
+static ssize_t fsg_lun_opts_removable_store(struct config_item *item,
+				       const char *page, size_t len)
+{
+	return fsg_store_removable(to_fsg_lun_opts(item)->lun, page, len);
+}
+
+CONFIGFS_ATTR(fsg_lun_opts_, removable);
+
+static ssize_t fsg_lun_opts_cdrom_show(struct config_item *item, char *page)
+{
+	return fsg_show_cdrom(to_fsg_lun_opts(item)->lun, page);
+}
+
+static ssize_t fsg_lun_opts_cdrom_store(struct config_item *item,
+				       const char *page, size_t len)
+{
+	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
+	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
+
+	return fsg_store_cdrom(opts->lun, &fsg_opts->common->filesem, page,
+			       len);
+}
+
+CONFIGFS_ATTR(fsg_lun_opts_, cdrom);
+
+static ssize_t fsg_lun_opts_nofua_show(struct config_item *item, char *page)
+{
+	return fsg_show_nofua(to_fsg_lun_opts(item)->lun, page);
+}
+
+static ssize_t fsg_lun_opts_nofua_store(struct config_item *item,
+				       const char *page, size_t len)
+{
+	return fsg_store_nofua(to_fsg_lun_opts(item)->lun, page, len);
+}
+
+CONFIGFS_ATTR(fsg_lun_opts_, nofua);
+
+static ssize_t fsg_lun_opts_inquiry_string_show(struct config_item *item,
+						char *page)
+{
+	return fsg_show_inquiry_string(to_fsg_lun_opts(item)->lun, page);
+}
+
+static ssize_t fsg_lun_opts_inquiry_string_store(struct config_item *item,
+						 const char *page, size_t len)
+{
+	return fsg_store_inquiry_string(to_fsg_lun_opts(item)->lun, page, len);
+}
+
+CONFIGFS_ATTR(fsg_lun_opts_, inquiry_string);
+
+static ssize_t fsg_lun_opts_forced_eject_store(struct config_item *item,
+					       const char *page, size_t len)
+{
+	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
+	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
+
+	return fsg_store_forced_eject(opts->lun, &fsg_opts->common->filesem,
+				      page, len);
+}
+
+CONFIGFS_ATTR_WO(fsg_lun_opts_, forced_eject);
+
+static struct configfs_attribute *fsg_lun_attrs[] = {
+	&fsg_lun_opts_attr_file,
+	&fsg_lun_opts_attr_ro,
+	&fsg_lun_opts_attr_removable,
+	&fsg_lun_opts_attr_cdrom,
+	&fsg_lun_opts_attr_nofua,
+	&fsg_lun_opts_attr_inquiry_string,
+	&fsg_lun_opts_attr_forced_eject,
+	NULL,
+};
+
+static const struct config_item_type fsg_lun_type = {
+	.ct_item_ops	= &fsg_lun_item_ops,
+	.ct_attrs	= fsg_lun_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_group *fsg_lun_make(struct config_group *group,
+					 const char *name)
+{
+	struct fsg_lun_opts *opts;
+	struct fsg_opts *fsg_opts;
+	struct fsg_lun_config config;
+	char *num_str;
+	u8 num;
+	int ret;
+
+	num_str = strchr(name, '.');
+	if (!num_str) {
+		pr_err("Unable to locate . in LUN.NUMBER\n");
+		return ERR_PTR(-EINVAL);
+	}
+	num_str++;
+
+	ret = kstrtou8(num_str, 0, &num);
+	if (ret)
+		return ERR_PTR(ret);
+
+	fsg_opts = to_fsg_opts(&group->cg_item);
+	if (num >= FSG_MAX_LUNS)
+		return ERR_PTR(-ERANGE);
+	num = array_index_nospec(num, FSG_MAX_LUNS);
+
+	mutex_lock(&fsg_opts->lock);
+	if (fsg_opts->refcnt || fsg_opts->common->luns[num]) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memset(&config, 0, sizeof(config));
+	config.removable = true;
+
+	ret = fsg_common_create_lun(fsg_opts->common, &config, num, name,
+				    (const char **)&group->cg_item.ci_name);
+	if (ret) {
+		kfree(opts);
+		goto out;
+	}
+	opts->lun = fsg_opts->common->luns[num];
+	opts->lun_id = num;
+	mutex_unlock(&fsg_opts->lock);
+
+	config_group_init_type_name(&opts->group, name, &fsg_lun_type);
+
+	return &opts->group;
+out:
+	mutex_unlock(&fsg_opts->lock);
+	return ERR_PTR(ret);
+}
+
+static void fsg_lun_drop(struct config_group *group, struct config_item *item)
+{
+	struct fsg_lun_opts *lun_opts;
+	struct fsg_opts *fsg_opts;
+
+	lun_opts = to_fsg_lun_opts(item);
+	fsg_opts = to_fsg_opts(&group->cg_item);
+
+	mutex_lock(&fsg_opts->lock);
+	if (fsg_opts->refcnt) {
+		struct config_item *gadget;
+
+		gadget = group->cg_item.ci_parent->ci_parent;
+		unregister_gadget_item(gadget);
+	}
+
+	fsg_common_remove_lun(lun_opts->lun);
+	fsg_opts->common->luns[lun_opts->lun_id] = NULL;
+	lun_opts->lun_id = 0;
+	mutex_unlock(&fsg_opts->lock);
+
+	config_item_put(item);
+}
+
+static void fsg_attr_release(struct config_item *item)
+{
+	struct fsg_opts *opts = to_fsg_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations fsg_item_ops = {
+	.release		= fsg_attr_release,
+};
+
+static ssize_t fsg_opts_stall_show(struct config_item *item, char *page)
+{
+	struct fsg_opts *opts = to_fsg_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d", opts->common->can_stall);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t fsg_opts_stall_store(struct config_item *item, const char *page,
+				    size_t len)
+{
+	struct fsg_opts *opts = to_fsg_opts(item);
+	int ret;
+	bool stall;
+
+	mutex_lock(&opts->lock);
+
+	if (opts->refcnt) {
+		mutex_unlock(&opts->lock);
+		return -EBUSY;
+	}
+
+	ret = strtobool(page, &stall);
+	if (!ret) {
+		opts->common->can_stall = stall;
+		ret = len;
+	}
+
+	mutex_unlock(&opts->lock);
+
+	return ret;
+}
+
+CONFIGFS_ATTR(fsg_opts_, stall);
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+static ssize_t fsg_opts_num_buffers_show(struct config_item *item, char *page)
+{
+	struct fsg_opts *opts = to_fsg_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d", opts->common->fsg_num_buffers);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t fsg_opts_num_buffers_store(struct config_item *item,
+					  const char *page, size_t len)
+{
+	struct fsg_opts *opts = to_fsg_opts(item);
+	int ret;
+	u8 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+	ret = kstrtou8(page, 0, &num);
+	if (ret)
+		goto end;
+
+	ret = fsg_common_set_num_buffers(opts->common, num);
+	if (ret)
+		goto end;
+	ret = len;
+
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+CONFIGFS_ATTR(fsg_opts_, num_buffers);
+#endif
+
+static struct configfs_attribute *fsg_attrs[] = {
+	&fsg_opts_attr_stall,
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+	&fsg_opts_attr_num_buffers,
+#endif
+	NULL,
+};
+
+static struct configfs_group_operations fsg_group_ops = {
+	.make_group	= fsg_lun_make,
+	.drop_item	= fsg_lun_drop,
+};
+
+static const struct config_item_type fsg_func_type = {
+	.ct_item_ops	= &fsg_item_ops,
+	.ct_group_ops	= &fsg_group_ops,
+	.ct_attrs	= fsg_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void fsg_free_inst(struct usb_function_instance *fi)
+{
+	struct fsg_opts *opts;
+
+	opts = fsg_opts_from_func_inst(fi);
+	fsg_common_release(opts->common);
+	kfree(opts);
+}
+
+static struct usb_function_instance *fsg_alloc_inst(void)
+{
+	struct fsg_opts *opts;
+	struct fsg_lun_config config;
+	int rc;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+	mutex_init(&opts->lock);
+	opts->func_inst.free_func_inst = fsg_free_inst;
+	opts->common = fsg_common_setup(opts->common);
+	if (IS_ERR(opts->common)) {
+		rc = PTR_ERR(opts->common);
+		goto release_opts;
+	}
+
+	rc = fsg_common_set_num_buffers(opts->common,
+					CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS);
+	if (rc)
+		goto release_common;
+
+	pr_info(FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n");
+
+	memset(&config, 0, sizeof(config));
+	config.removable = true;
+	rc = fsg_common_create_lun(opts->common, &config, 0, "lun.0",
+			(const char **)&opts->func_inst.group.cg_item.ci_name);
+	if (rc)
+		goto release_buffers;
+
+	opts->lun0.lun = opts->common->luns[0];
+	opts->lun0.lun_id = 0;
+
+	config_group_init_type_name(&opts->func_inst.group, "", &fsg_func_type);
+
+	config_group_init_type_name(&opts->lun0.group, "lun.0", &fsg_lun_type);
+	configfs_add_default_group(&opts->lun0.group, &opts->func_inst.group);
+
+	return &opts->func_inst;
+
+release_buffers:
+	fsg_common_free_buffers(opts->common);
+release_common:
+	kfree(opts->common);
+release_opts:
+	kfree(opts);
+	return ERR_PTR(rc);
+}
+
+static void fsg_free(struct usb_function *f)
+{
+	struct fsg_dev *fsg;
+	struct fsg_opts *opts;
+
+	fsg = container_of(f, struct fsg_dev, function);
+	opts = container_of(f->fi, struct fsg_opts, func_inst);
+
+	mutex_lock(&opts->lock);
+	opts->refcnt--;
+	mutex_unlock(&opts->lock);
+
+	kfree(fsg);
+}
+
+static struct usb_function *fsg_alloc(struct usb_function_instance *fi)
+{
+	struct fsg_opts *opts = fsg_opts_from_func_inst(fi);
+	struct fsg_common *common = opts->common;
+	struct fsg_dev *fsg;
+
+	fsg = kzalloc(sizeof(*fsg), GFP_KERNEL);
+	if (unlikely(!fsg))
+		return ERR_PTR(-ENOMEM);
+
+	mutex_lock(&opts->lock);
+	opts->refcnt++;
+	mutex_unlock(&opts->lock);
+
+	fsg->function.name	= FSG_DRIVER_DESC;
+	fsg->function.bind	= fsg_bind;
+	fsg->function.unbind	= fsg_unbind;
+	fsg->function.setup	= fsg_setup;
+	fsg->function.set_alt	= fsg_set_alt;
+	fsg->function.disable	= fsg_disable;
+	fsg->function.free_func	= fsg_free;
+
+	fsg->common               = common;
+
+	return &fsg->function;
+}
+
+DECLARE_USB_FUNCTION_INIT(mass_storage, fsg_alloc_inst, fsg_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michal Nazarewicz");
+
+/************************* Module parameters *************************/
+
+
+void fsg_config_from_params(struct fsg_config *cfg,
+		       const struct fsg_module_parameters *params,
+		       unsigned int fsg_num_buffers)
+{
+	struct fsg_lun_config *lun;
+	unsigned i;
+
+	/* Configure LUNs */
+	cfg->nluns =
+		min(params->luns ?: (params->file_count ?: 1u),
+		    (unsigned)FSG_MAX_LUNS);
+	for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) {
+		lun->ro = !!params->ro[i];
+		lun->cdrom = !!params->cdrom[i];
+		lun->removable = !!params->removable[i];
+		lun->filename =
+			params->file_count > i && params->file[i][0]
+			? params->file[i]
+			: NULL;
+	}
+
+	/* Let MSF use defaults */
+	cfg->vendor_name = NULL;
+	cfg->product_name = NULL;
+
+	cfg->ops = NULL;
+	cfg->private_data = NULL;
+
+	/* Finalise */
+	cfg->can_stall = params->stall;
+	cfg->fsg_num_buffers = fsg_num_buffers;
+}
+EXPORT_SYMBOL_GPL(fsg_config_from_params);
diff --git a/drivers/usb/gadget/function/f_mass_storage.h b/drivers/usb/gadget/function/f_mass_storage.h
new file mode 100644
index 000000000..3b8c4ce2a
--- /dev/null
+++ b/drivers/usb/gadget/function/f_mass_storage.h
@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef USB_F_MASS_STORAGE_H
+#define USB_F_MASS_STORAGE_H
+
+#include <linux/usb/composite.h>
+#include "storage_common.h"
+
+struct fsg_module_parameters {
+	char		*file[FSG_MAX_LUNS];
+	bool		ro[FSG_MAX_LUNS];
+	bool		removable[FSG_MAX_LUNS];
+	bool		cdrom[FSG_MAX_LUNS];
+	bool		nofua[FSG_MAX_LUNS];
+
+	unsigned int	file_count, ro_count, removable_count, cdrom_count;
+	unsigned int	nofua_count;
+	unsigned int	luns;	/* nluns */
+	bool		stall;	/* can_stall */
+};
+
+#define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc)	\
+	module_param_array_named(prefix ## name, params.name, type,	\
+				 &prefix ## params.name ## _count,	\
+				 S_IRUGO);				\
+	MODULE_PARM_DESC(prefix ## name, desc)
+
+#define _FSG_MODULE_PARAM(prefix, params, name, type, desc)		\
+	module_param_named(prefix ## name, params.name, type,		\
+			   S_IRUGO);					\
+	MODULE_PARM_DESC(prefix ## name, desc)
+
+#define __FSG_MODULE_PARAMETERS(prefix, params)				\
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, file, charp,		\
+				"names of backing files or devices");	\
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, ro, bool,		\
+				"true to force read-only");		\
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, removable, bool,	\
+				"true to simulate removable media");	\
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, cdrom, bool,		\
+				"true to simulate CD-ROM instead of disk"); \
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, nofua, bool,		\
+				"true to ignore SCSI WRITE(10,12) FUA bit"); \
+	_FSG_MODULE_PARAM(prefix, params, luns, uint,			\
+			  "number of LUNs");				\
+	_FSG_MODULE_PARAM(prefix, params, stall, bool,			\
+			  "false to prevent bulk stalls")
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+#define FSG_MODULE_PARAMETERS(prefix, params)				\
+	__FSG_MODULE_PARAMETERS(prefix, params);			\
+	module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO);\
+	MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers")
+#else
+
+#define FSG_MODULE_PARAMETERS(prefix, params)				\
+	__FSG_MODULE_PARAMETERS(prefix, params)
+
+#endif
+
+struct fsg_common;
+
+/* FSF callback functions */
+struct fsg_lun_opts {
+	struct config_group group;
+	struct fsg_lun *lun;
+	int lun_id;
+};
+
+struct fsg_opts {
+	struct fsg_common *common;
+	struct usb_function_instance func_inst;
+	struct fsg_lun_opts lun0;
+	struct config_group *default_groups[2];
+	bool no_configfs; /* for legacy gadgets */
+
+	/*
+	 * Read/write access to configfs attributes is handled by configfs.
+	 *
+	 * This is to protect the data from concurrent access by read/write
+	 * and create symlink/remove symlink.
+	 */
+	struct mutex			lock;
+	int				refcnt;
+};
+
+struct fsg_lun_config {
+	const char *filename;
+	char ro;
+	char removable;
+	char cdrom;
+	char nofua;
+	char inquiry_string[INQUIRY_STRING_LEN];
+};
+
+struct fsg_config {
+	unsigned nluns;
+	struct fsg_lun_config luns[FSG_MAX_LUNS];
+
+	/* Callback functions. */
+	const struct fsg_operations	*ops;
+	/* Gadget's private data. */
+	void			*private_data;
+
+	const char *vendor_name;		/*  8 characters or less */
+	const char *product_name;		/* 16 characters or less */
+
+	char			can_stall;
+	unsigned int		fsg_num_buffers;
+};
+
+static inline struct fsg_opts *
+fsg_opts_from_func_inst(const struct usb_function_instance *fi)
+{
+	return container_of(fi, struct fsg_opts, func_inst);
+}
+
+void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs);
+
+int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n);
+
+void fsg_common_free_buffers(struct fsg_common *common);
+
+int fsg_common_set_cdev(struct fsg_common *common,
+			struct usb_composite_dev *cdev, bool can_stall);
+
+void fsg_common_remove_lun(struct fsg_lun *lun);
+
+void fsg_common_remove_luns(struct fsg_common *common);
+
+int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
+			  unsigned int id, const char *name,
+			  const char **name_pfx);
+
+int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg);
+
+void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
+				   const char *pn);
+
+void fsg_config_from_params(struct fsg_config *cfg,
+			    const struct fsg_module_parameters *params,
+			    unsigned int fsg_num_buffers);
+
+#endif /* USB_F_MASS_STORAGE_H */
diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c
new file mode 100644
index 000000000..fddf53900
--- /dev/null
+++ b/drivers/usb/gadget/function/f_midi.c
@@ -0,0 +1,1408 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_midi.c -- USB MIDI class function driver
+ *
+ * Copyright (C) 2006 Thumtronics Pty Ltd.
+ * Developed for Thumtronics by Grey Innovation
+ * Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * Rewritten for the composite framework
+ *   Copyright (C) 2011 Daniel Mack <zonque@gmail.com>
+ *
+ * Based on drivers/usb/gadget/f_audio.c,
+ *   Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ *   Copyright (C) 2008 Analog Devices, Inc
+ *
+ * and drivers/usb/gadget/midi.c,
+ *   Copyright (C) 2006 Thumtronics Pty Ltd.
+ *   Ben Williamson <ben.williamson@greyinnovation.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/kfifo.h>
+#include <linux/spinlock.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/rawmidi.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/midi.h>
+
+#include "u_f.h"
+#include "u_midi.h"
+
+MODULE_AUTHOR("Ben Williamson");
+MODULE_LICENSE("GPL v2");
+
+static const char f_midi_shortname[] = "f_midi";
+static const char f_midi_longname[] = "MIDI Gadget";
+
+/*
+ * We can only handle 16 cables on one single endpoint, as cable numbers are
+ * stored in 4-bit fields. And as the interface currently only holds one
+ * single endpoint, this is the maximum number of ports we can allow.
+ */
+#define MAX_PORTS 16
+
+/* MIDI message states */
+enum {
+	STATE_INITIAL = 0,	/* pseudo state */
+	STATE_1PARAM,
+	STATE_2PARAM_1,
+	STATE_2PARAM_2,
+	STATE_SYSEX_0,
+	STATE_SYSEX_1,
+	STATE_SYSEX_2,
+	STATE_REAL_TIME,
+	STATE_FINISHED,		/* pseudo state */
+};
+
+/*
+ * This is a gadget, and the IN/OUT naming is from the host's perspective.
+ * USB -> OUT endpoint -> rawmidi
+ * USB <- IN endpoint  <- rawmidi
+ */
+struct gmidi_in_port {
+	struct snd_rawmidi_substream *substream;
+	int active;
+	uint8_t cable;
+	uint8_t state;
+	uint8_t data[2];
+};
+
+struct f_midi {
+	struct usb_function	func;
+	struct usb_gadget	*gadget;
+	struct usb_ep		*in_ep, *out_ep;
+	struct snd_card		*card;
+	struct snd_rawmidi	*rmidi;
+	u8			ms_id;
+
+	struct snd_rawmidi_substream *out_substream[MAX_PORTS];
+
+	unsigned long		out_triggered;
+	struct work_struct	work;
+	unsigned int in_ports;
+	unsigned int out_ports;
+	int index;
+	char *id;
+	unsigned int buflen, qlen;
+	/* This fifo is used as a buffer ring for pre-allocated IN usb_requests */
+	DECLARE_KFIFO_PTR(in_req_fifo, struct usb_request *);
+	spinlock_t transmit_lock;
+	unsigned int in_last_port;
+	unsigned char free_ref;
+
+	struct gmidi_in_port	in_ports_array[/* in_ports */];
+};
+
+static inline struct f_midi *func_to_midi(struct usb_function *f)
+{
+	return container_of(f, struct f_midi, func);
+}
+
+static void f_midi_transmit(struct f_midi *midi);
+static void f_midi_rmidi_free(struct snd_rawmidi *rmidi);
+static void f_midi_free_inst(struct usb_function_instance *f);
+
+DECLARE_UAC_AC_HEADER_DESCRIPTOR(1);
+DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1);
+DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(16);
+
+/* B.3.1  Standard AC Interface Descriptor */
+static struct usb_interface_descriptor ac_interface_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	/* .bInterfaceNumber =	DYNAMIC */
+	/* .bNumEndpoints =	DYNAMIC */
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOCONTROL,
+	/* .iInterface =	DYNAMIC */
+};
+
+/* B.3.2  Class-Specific AC Interface Descriptor */
+static struct uac1_ac_header_descriptor_1 ac_header_desc = {
+	.bLength =		UAC_DT_AC_HEADER_SIZE(1),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	USB_MS_HEADER,
+	.bcdADC =		cpu_to_le16(0x0100),
+	.wTotalLength =		cpu_to_le16(UAC_DT_AC_HEADER_SIZE(1)),
+	.bInCollection =	1,
+	/* .baInterfaceNr =	DYNAMIC */
+};
+
+/* B.4.1  Standard MS Interface Descriptor */
+static struct usb_interface_descriptor ms_interface_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	/* .bInterfaceNumber =	DYNAMIC */
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_MIDISTREAMING,
+	/* .iInterface =	DYNAMIC */
+};
+
+/* B.4.2  Class-Specific MS Interface Descriptor */
+static struct usb_ms_header_descriptor ms_header_desc = {
+	.bLength =		USB_DT_MS_HEADER_SIZE,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	USB_MS_HEADER,
+	.bcdMSC =		cpu_to_le16(0x0100),
+	/* .wTotalLength =	DYNAMIC */
+};
+
+/* B.5.1  Standard Bulk OUT Endpoint Descriptor */
+static struct usb_endpoint_descriptor bulk_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_ss_ep_comp_descriptor bulk_out_ss_comp_desc = {
+	.bLength                = sizeof(bulk_out_ss_comp_desc),
+	.bDescriptorType        = USB_DT_SS_ENDPOINT_COMP,
+	/* .bMaxBurst           = 0, */
+	/* .bmAttributes        = 0, */
+};
+
+/* B.5.2  Class-specific MS Bulk OUT Endpoint Descriptor */
+static struct usb_ms_endpoint_descriptor_16 ms_out_desc = {
+	/* .bLength =		DYNAMIC */
+	.bDescriptorType =	USB_DT_CS_ENDPOINT,
+	.bDescriptorSubtype =	USB_MS_GENERAL,
+	/* .bNumEmbMIDIJack =	DYNAMIC */
+	/* .baAssocJackID =	DYNAMIC */
+};
+
+/* B.6.1  Standard Bulk IN Endpoint Descriptor */
+static struct usb_endpoint_descriptor bulk_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_ss_ep_comp_descriptor bulk_in_ss_comp_desc = {
+	.bLength                = sizeof(bulk_in_ss_comp_desc),
+	.bDescriptorType        = USB_DT_SS_ENDPOINT_COMP,
+	/* .bMaxBurst           = 0, */
+	/* .bmAttributes        = 0, */
+};
+
+/* B.6.2  Class-specific MS Bulk IN Endpoint Descriptor */
+static struct usb_ms_endpoint_descriptor_16 ms_in_desc = {
+	/* .bLength =		DYNAMIC */
+	.bDescriptorType =	USB_DT_CS_ENDPOINT,
+	.bDescriptorSubtype =	USB_MS_GENERAL,
+	/* .bNumEmbMIDIJack =	DYNAMIC */
+	/* .baAssocJackID =	DYNAMIC */
+};
+
+/* string IDs are assigned dynamically */
+
+#define STRING_FUNC_IDX			0
+
+static struct usb_string midi_string_defs[] = {
+	[STRING_FUNC_IDX].s = "MIDI function",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings midi_stringtab = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= midi_string_defs,
+};
+
+static struct usb_gadget_strings *midi_strings[] = {
+	&midi_stringtab,
+	NULL,
+};
+
+static inline struct usb_request *midi_alloc_ep_req(struct usb_ep *ep,
+						    unsigned length)
+{
+	return alloc_ep_req(ep, length);
+}
+
+static const uint8_t f_midi_cin_length[] = {
+	0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1
+};
+
+/*
+ * Receives a chunk of MIDI data.
+ */
+static void f_midi_read_data(struct usb_ep *ep, int cable,
+			     uint8_t *data, int length)
+{
+	struct f_midi *midi = ep->driver_data;
+	struct snd_rawmidi_substream *substream = midi->out_substream[cable];
+
+	if (!substream)
+		/* Nobody is listening - throw it on the floor. */
+		return;
+
+	if (!test_bit(cable, &midi->out_triggered))
+		return;
+
+	snd_rawmidi_receive(substream, data, length);
+}
+
+static void f_midi_handle_out_data(struct usb_ep *ep, struct usb_request *req)
+{
+	unsigned int i;
+	u8 *buf = req->buf;
+
+	for (i = 0; i + 3 < req->actual; i += 4)
+		if (buf[i] != 0) {
+			int cable = buf[i] >> 4;
+			int length = f_midi_cin_length[buf[i] & 0x0f];
+			f_midi_read_data(ep, cable, &buf[i + 1], length);
+		}
+}
+
+static void
+f_midi_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_midi *midi = ep->driver_data;
+	struct usb_composite_dev *cdev = midi->func.config->cdev;
+	int status = req->status;
+
+	switch (status) {
+	case 0:			 /* normal completion */
+		if (ep == midi->out_ep) {
+			/* We received stuff. req is queued again, below */
+			f_midi_handle_out_data(ep, req);
+		} else if (ep == midi->in_ep) {
+			/* Our transmit completed. See if there's more to go.
+			 * f_midi_transmit eats req, don't queue it again. */
+			req->length = 0;
+			f_midi_transmit(midi);
+			return;
+		}
+		break;
+
+	/* this endpoint is normally active while we're configured */
+	case -ECONNABORTED:	/* hardware forced ep reset */
+	case -ECONNRESET:	/* request dequeued */
+	case -ESHUTDOWN:	/* disconnect from host */
+		VDBG(cdev, "%s gone (%d), %d/%d\n", ep->name, status,
+				req->actual, req->length);
+		if (ep == midi->out_ep) {
+			f_midi_handle_out_data(ep, req);
+			/* We don't need to free IN requests because it's handled
+			 * by the midi->in_req_fifo. */
+			free_ep_req(ep, req);
+		}
+		return;
+
+	case -EOVERFLOW:	/* buffer overrun on read means that
+				 * we didn't provide a big enough buffer.
+				 */
+	default:
+		DBG(cdev, "%s complete --> %d, %d/%d\n", ep->name,
+				status, req->actual, req->length);
+		break;
+	case -EREMOTEIO:	/* short read */
+		break;
+	}
+
+	status = usb_ep_queue(ep, req, GFP_ATOMIC);
+	if (status) {
+		ERROR(cdev, "kill %s:  resubmit %d bytes --> %d\n",
+				ep->name, req->length, status);
+		usb_ep_set_halt(ep);
+		/* FIXME recover later ... somehow */
+	}
+}
+
+static void f_midi_drop_out_substreams(struct f_midi *midi)
+{
+	unsigned int i;
+
+	for (i = 0; i < midi->in_ports; i++) {
+		struct gmidi_in_port *port = midi->in_ports_array + i;
+		struct snd_rawmidi_substream *substream = port->substream;
+
+		if (port->active && substream)
+			snd_rawmidi_drop_output(substream);
+	}
+}
+
+static int f_midi_start_ep(struct f_midi *midi,
+			   struct usb_function *f,
+			   struct usb_ep *ep)
+{
+	int err;
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	usb_ep_disable(ep);
+
+	err = config_ep_by_speed(midi->gadget, f, ep);
+	if (err) {
+		ERROR(cdev, "can't configure %s: %d\n", ep->name, err);
+		return err;
+	}
+
+	err = usb_ep_enable(ep);
+	if (err) {
+		ERROR(cdev, "can't start %s: %d\n", ep->name, err);
+		return err;
+	}
+
+	ep->driver_data = midi;
+
+	return 0;
+}
+
+static int f_midi_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_midi *midi = func_to_midi(f);
+	unsigned i;
+	int err;
+
+	/* we only set alt for MIDIStreaming interface */
+	if (intf != midi->ms_id)
+		return 0;
+
+	err = f_midi_start_ep(midi, f, midi->in_ep);
+	if (err)
+		return err;
+
+	err = f_midi_start_ep(midi, f, midi->out_ep);
+	if (err)
+		return err;
+
+	/* pre-allocate write usb requests to use on f_midi_transmit. */
+	while (kfifo_avail(&midi->in_req_fifo)) {
+		struct usb_request *req =
+			midi_alloc_ep_req(midi->in_ep, midi->buflen);
+
+		if (req == NULL)
+			return -ENOMEM;
+
+		req->length = 0;
+		req->complete = f_midi_complete;
+
+		kfifo_put(&midi->in_req_fifo, req);
+	}
+
+	/* allocate a bunch of read buffers and queue them all at once. */
+	for (i = 0; i < midi->qlen && err == 0; i++) {
+		struct usb_request *req =
+			midi_alloc_ep_req(midi->out_ep, midi->buflen);
+
+		if (req == NULL)
+			return -ENOMEM;
+
+		req->complete = f_midi_complete;
+		err = usb_ep_queue(midi->out_ep, req, GFP_ATOMIC);
+		if (err) {
+			ERROR(midi, "%s: couldn't enqueue request: %d\n",
+				    midi->out_ep->name, err);
+			if (req->buf != NULL)
+				free_ep_req(midi->out_ep, req);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static void f_midi_disable(struct usb_function *f)
+{
+	struct f_midi *midi = func_to_midi(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request *req = NULL;
+
+	DBG(cdev, "disable\n");
+
+	/*
+	 * just disable endpoints, forcing completion of pending i/o.
+	 * all our completion handlers free their requests in this case.
+	 */
+	usb_ep_disable(midi->in_ep);
+	usb_ep_disable(midi->out_ep);
+
+	/* release IN requests */
+	while (kfifo_get(&midi->in_req_fifo, &req))
+		free_ep_req(midi->in_ep, req);
+
+	f_midi_drop_out_substreams(midi);
+}
+
+static int f_midi_snd_free(struct snd_device *device)
+{
+	return 0;
+}
+
+/*
+ * Converts MIDI commands to USB MIDI packets.
+ */
+static void f_midi_transmit_byte(struct usb_request *req,
+				 struct gmidi_in_port *port, uint8_t b)
+{
+	uint8_t p[4] = { port->cable << 4, 0, 0, 0 };
+	uint8_t next_state = STATE_INITIAL;
+
+	switch (b) {
+	case 0xf8 ... 0xff:
+		/* System Real-Time Messages */
+		p[0] |= 0x0f;
+		p[1] = b;
+		next_state = port->state;
+		port->state = STATE_REAL_TIME;
+		break;
+
+	case 0xf7:
+		/* End of SysEx */
+		switch (port->state) {
+		case STATE_SYSEX_0:
+			p[0] |= 0x05;
+			p[1] = 0xf7;
+			next_state = STATE_FINISHED;
+			break;
+		case STATE_SYSEX_1:
+			p[0] |= 0x06;
+			p[1] = port->data[0];
+			p[2] = 0xf7;
+			next_state = STATE_FINISHED;
+			break;
+		case STATE_SYSEX_2:
+			p[0] |= 0x07;
+			p[1] = port->data[0];
+			p[2] = port->data[1];
+			p[3] = 0xf7;
+			next_state = STATE_FINISHED;
+			break;
+		default:
+			/* Ignore byte */
+			next_state = port->state;
+			port->state = STATE_INITIAL;
+		}
+		break;
+
+	case 0xf0 ... 0xf6:
+		/* System Common Messages */
+		port->data[0] = port->data[1] = 0;
+		port->state = STATE_INITIAL;
+		switch (b) {
+		case 0xf0:
+			port->data[0] = b;
+			port->data[1] = 0;
+			next_state = STATE_SYSEX_1;
+			break;
+		case 0xf1:
+		case 0xf3:
+			port->data[0] = b;
+			next_state = STATE_1PARAM;
+			break;
+		case 0xf2:
+			port->data[0] = b;
+			next_state = STATE_2PARAM_1;
+			break;
+		case 0xf4:
+		case 0xf5:
+			next_state = STATE_INITIAL;
+			break;
+		case 0xf6:
+			p[0] |= 0x05;
+			p[1] = 0xf6;
+			next_state = STATE_FINISHED;
+			break;
+		}
+		break;
+
+	case 0x80 ... 0xef:
+		/*
+		 * Channel Voice Messages, Channel Mode Messages
+		 * and Control Change Messages.
+		 */
+		port->data[0] = b;
+		port->data[1] = 0;
+		port->state = STATE_INITIAL;
+		if (b >= 0xc0 && b <= 0xdf)
+			next_state = STATE_1PARAM;
+		else
+			next_state = STATE_2PARAM_1;
+		break;
+
+	case 0x00 ... 0x7f:
+		/* Message parameters */
+		switch (port->state) {
+		case STATE_1PARAM:
+			if (port->data[0] < 0xf0)
+				p[0] |= port->data[0] >> 4;
+			else
+				p[0] |= 0x02;
+
+			p[1] = port->data[0];
+			p[2] = b;
+			/* This is to allow Running State Messages */
+			next_state = STATE_1PARAM;
+			break;
+		case STATE_2PARAM_1:
+			port->data[1] = b;
+			next_state = STATE_2PARAM_2;
+			break;
+		case STATE_2PARAM_2:
+			if (port->data[0] < 0xf0)
+				p[0] |= port->data[0] >> 4;
+			else
+				p[0] |= 0x03;
+
+			p[1] = port->data[0];
+			p[2] = port->data[1];
+			p[3] = b;
+			/* This is to allow Running State Messages */
+			next_state = STATE_2PARAM_1;
+			break;
+		case STATE_SYSEX_0:
+			port->data[0] = b;
+			next_state = STATE_SYSEX_1;
+			break;
+		case STATE_SYSEX_1:
+			port->data[1] = b;
+			next_state = STATE_SYSEX_2;
+			break;
+		case STATE_SYSEX_2:
+			p[0] |= 0x04;
+			p[1] = port->data[0];
+			p[2] = port->data[1];
+			p[3] = b;
+			next_state = STATE_SYSEX_0;
+			break;
+		}
+		break;
+	}
+
+	/* States where we have to write into the USB request */
+	if (next_state == STATE_FINISHED ||
+	    port->state == STATE_SYSEX_2 ||
+	    port->state == STATE_1PARAM ||
+	    port->state == STATE_2PARAM_2 ||
+	    port->state == STATE_REAL_TIME) {
+
+		unsigned int length = req->length;
+		u8 *buf = (u8 *)req->buf + length;
+
+		memcpy(buf, p, sizeof(p));
+		req->length = length + sizeof(p);
+
+		if (next_state == STATE_FINISHED) {
+			next_state = STATE_INITIAL;
+			port->data[0] = port->data[1] = 0;
+		}
+	}
+
+	port->state = next_state;
+}
+
+static int f_midi_do_transmit(struct f_midi *midi, struct usb_ep *ep)
+{
+	struct usb_request *req = NULL;
+	unsigned int len, i;
+	bool active = false;
+	int err;
+
+	/*
+	 * We peek the request in order to reuse it if it fails to enqueue on
+	 * its endpoint
+	 */
+	len = kfifo_peek(&midi->in_req_fifo, &req);
+	if (len != 1) {
+		ERROR(midi, "%s: Couldn't get usb request\n", __func__);
+		return -1;
+	}
+
+	/*
+	 * If buffer overrun, then we ignore this transmission.
+	 * IMPORTANT: This will cause the user-space rawmidi device to block
+	 * until a) usb requests have been completed or b) snd_rawmidi_write()
+	 * times out.
+	 */
+	if (req->length > 0)
+		return 0;
+
+	for (i = midi->in_last_port; i < midi->in_ports; ++i) {
+		struct gmidi_in_port *port = midi->in_ports_array + i;
+		struct snd_rawmidi_substream *substream = port->substream;
+
+		if (!port->active || !substream)
+			continue;
+
+		while (req->length + 3 < midi->buflen) {
+			uint8_t b;
+
+			if (snd_rawmidi_transmit(substream, &b, 1) != 1) {
+				port->active = 0;
+				break;
+			}
+			f_midi_transmit_byte(req, port, b);
+		}
+
+		active = !!port->active;
+		if (active)
+			break;
+	}
+	midi->in_last_port = active ? i : 0;
+
+	if (req->length <= 0)
+		goto done;
+
+	err = usb_ep_queue(ep, req, GFP_ATOMIC);
+	if (err < 0) {
+		ERROR(midi, "%s failed to queue req: %d\n",
+		      midi->in_ep->name, err);
+		req->length = 0; /* Re-use request next time. */
+	} else {
+		/* Upon success, put request at the back of the queue. */
+		kfifo_skip(&midi->in_req_fifo);
+		kfifo_put(&midi->in_req_fifo, req);
+	}
+
+done:
+	return active;
+}
+
+static void f_midi_transmit(struct f_midi *midi)
+{
+	struct usb_ep *ep = midi->in_ep;
+	int ret;
+	unsigned long flags;
+
+	/* We only care about USB requests if IN endpoint is enabled */
+	if (!ep || !ep->enabled)
+		goto drop_out;
+
+	spin_lock_irqsave(&midi->transmit_lock, flags);
+
+	do {
+		ret = f_midi_do_transmit(midi, ep);
+		if (ret < 0) {
+			spin_unlock_irqrestore(&midi->transmit_lock, flags);
+			goto drop_out;
+		}
+	} while (ret);
+
+	spin_unlock_irqrestore(&midi->transmit_lock, flags);
+
+	return;
+
+drop_out:
+	f_midi_drop_out_substreams(midi);
+}
+
+static void f_midi_in_work(struct work_struct *work)
+{
+	struct f_midi *midi;
+
+	midi = container_of(work, struct f_midi, work);
+	f_midi_transmit(midi);
+}
+
+static int f_midi_in_open(struct snd_rawmidi_substream *substream)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+	struct gmidi_in_port *port;
+
+	if (substream->number >= midi->in_ports)
+		return -EINVAL;
+
+	VDBG(midi, "%s()\n", __func__);
+	port = midi->in_ports_array + substream->number;
+	port->substream = substream;
+	port->state = STATE_INITIAL;
+	return 0;
+}
+
+static int f_midi_in_close(struct snd_rawmidi_substream *substream)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	VDBG(midi, "%s()\n", __func__);
+	return 0;
+}
+
+static void f_midi_in_trigger(struct snd_rawmidi_substream *substream, int up)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	if (substream->number >= midi->in_ports)
+		return;
+
+	VDBG(midi, "%s() %d\n", __func__, up);
+	midi->in_ports_array[substream->number].active = up;
+	if (up)
+		queue_work(system_highpri_wq, &midi->work);
+}
+
+static int f_midi_out_open(struct snd_rawmidi_substream *substream)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	if (substream->number >= MAX_PORTS)
+		return -EINVAL;
+
+	VDBG(midi, "%s()\n", __func__);
+	midi->out_substream[substream->number] = substream;
+	return 0;
+}
+
+static int f_midi_out_close(struct snd_rawmidi_substream *substream)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	VDBG(midi, "%s()\n", __func__);
+	return 0;
+}
+
+static void f_midi_out_trigger(struct snd_rawmidi_substream *substream, int up)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	VDBG(midi, "%s()\n", __func__);
+
+	if (up)
+		set_bit(substream->number, &midi->out_triggered);
+	else
+		clear_bit(substream->number, &midi->out_triggered);
+}
+
+static const struct snd_rawmidi_ops gmidi_in_ops = {
+	.open = f_midi_in_open,
+	.close = f_midi_in_close,
+	.trigger = f_midi_in_trigger,
+};
+
+static const struct snd_rawmidi_ops gmidi_out_ops = {
+	.open = f_midi_out_open,
+	.close = f_midi_out_close,
+	.trigger = f_midi_out_trigger
+};
+
+static inline void f_midi_unregister_card(struct f_midi *midi)
+{
+	if (midi->card) {
+		snd_card_free(midi->card);
+		midi->card = NULL;
+	}
+}
+
+/* register as a sound "card" */
+static int f_midi_register_card(struct f_midi *midi)
+{
+	struct snd_card *card;
+	struct snd_rawmidi *rmidi;
+	int err;
+	static struct snd_device_ops ops = {
+		.dev_free = f_midi_snd_free,
+	};
+
+	err = snd_card_new(&midi->gadget->dev, midi->index, midi->id,
+			   THIS_MODULE, 0, &card);
+	if (err < 0) {
+		ERROR(midi, "snd_card_new() failed\n");
+		goto fail;
+	}
+	midi->card = card;
+
+	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, midi, &ops);
+	if (err < 0) {
+		ERROR(midi, "snd_device_new() failed: error %d\n", err);
+		goto fail;
+	}
+
+	strcpy(card->driver, f_midi_longname);
+	strcpy(card->longname, f_midi_longname);
+	strcpy(card->shortname, f_midi_shortname);
+
+	/* Set up rawmidi */
+	snd_component_add(card, "MIDI");
+	err = snd_rawmidi_new(card, card->longname, 0,
+			      midi->out_ports, midi->in_ports, &rmidi);
+	if (err < 0) {
+		ERROR(midi, "snd_rawmidi_new() failed: error %d\n", err);
+		goto fail;
+	}
+	midi->rmidi = rmidi;
+	midi->in_last_port = 0;
+	strcpy(rmidi->name, card->shortname);
+	rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT |
+			    SNDRV_RAWMIDI_INFO_INPUT |
+			    SNDRV_RAWMIDI_INFO_DUPLEX;
+	rmidi->private_data = midi;
+	rmidi->private_free = f_midi_rmidi_free;
+	midi->free_ref++;
+
+	/*
+	 * Yes, rawmidi OUTPUT = USB IN, and rawmidi INPUT = USB OUT.
+	 * It's an upside-down world being a gadget.
+	 */
+	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &gmidi_in_ops);
+	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &gmidi_out_ops);
+
+	/* register it - we're ready to go */
+	err = snd_card_register(card);
+	if (err < 0) {
+		ERROR(midi, "snd_card_register() failed\n");
+		goto fail;
+	}
+
+	VDBG(midi, "%s() finished ok\n", __func__);
+	return 0;
+
+fail:
+	f_midi_unregister_card(midi);
+	return err;
+}
+
+/* MIDI function driver setup/binding */
+
+static int f_midi_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_descriptor_header **midi_function;
+	struct usb_midi_in_jack_descriptor jack_in_ext_desc[MAX_PORTS];
+	struct usb_midi_in_jack_descriptor jack_in_emb_desc[MAX_PORTS];
+	struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc[MAX_PORTS];
+	struct usb_midi_out_jack_descriptor_1 jack_out_emb_desc[MAX_PORTS];
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_midi *midi = func_to_midi(f);
+	struct usb_string *us;
+	int status, n, jack = 1, i = 0, endpoint_descriptor_index = 0;
+
+	midi->gadget = cdev->gadget;
+	INIT_WORK(&midi->work, f_midi_in_work);
+	status = f_midi_register_card(midi);
+	if (status < 0)
+		goto fail_register;
+
+	/* maybe allocate device-global string ID */
+	us = usb_gstrings_attach(c->cdev, midi_strings,
+				 ARRAY_SIZE(midi_string_defs));
+	if (IS_ERR(us)) {
+		status = PTR_ERR(us);
+		goto fail;
+	}
+	ac_interface_desc.iInterface = us[STRING_FUNC_IDX].id;
+
+	/* We have two interfaces, AudioControl and MIDIStreaming */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	ac_interface_desc.bInterfaceNumber = status;
+
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	ms_interface_desc.bInterfaceNumber = status;
+	ac_header_desc.baInterfaceNr[0] = status;
+	midi->ms_id = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	midi->in_ep = usb_ep_autoconfig(cdev->gadget, &bulk_in_desc);
+	if (!midi->in_ep)
+		goto fail;
+
+	midi->out_ep = usb_ep_autoconfig(cdev->gadget, &bulk_out_desc);
+	if (!midi->out_ep)
+		goto fail;
+
+	/* allocate temporary function list */
+	midi_function = kcalloc((MAX_PORTS * 4) + 11, sizeof(*midi_function),
+				GFP_KERNEL);
+	if (!midi_function) {
+		status = -ENOMEM;
+		goto fail;
+	}
+
+	/*
+	 * construct the function's descriptor set. As the number of
+	 * input and output MIDI ports is configurable, we have to do
+	 * it that way.
+	 */
+
+	/* add the headers - these are always the same */
+	midi_function[i++] = (struct usb_descriptor_header *) &ac_interface_desc;
+	midi_function[i++] = (struct usb_descriptor_header *) &ac_header_desc;
+	midi_function[i++] = (struct usb_descriptor_header *) &ms_interface_desc;
+
+	/* calculate the header's wTotalLength */
+	n = USB_DT_MS_HEADER_SIZE
+		+ (midi->in_ports + midi->out_ports) *
+			(USB_DT_MIDI_IN_SIZE + USB_DT_MIDI_OUT_SIZE(1));
+	ms_header_desc.wTotalLength = cpu_to_le16(n);
+
+	midi_function[i++] = (struct usb_descriptor_header *) &ms_header_desc;
+
+	/* configure the external IN jacks, each linked to an embedded OUT jack */
+	for (n = 0; n < midi->in_ports; n++) {
+		struct usb_midi_in_jack_descriptor *in_ext = &jack_in_ext_desc[n];
+		struct usb_midi_out_jack_descriptor_1 *out_emb = &jack_out_emb_desc[n];
+
+		in_ext->bLength			= USB_DT_MIDI_IN_SIZE;
+		in_ext->bDescriptorType		= USB_DT_CS_INTERFACE;
+		in_ext->bDescriptorSubtype	= USB_MS_MIDI_IN_JACK;
+		in_ext->bJackType		= USB_MS_EXTERNAL;
+		in_ext->bJackID			= jack++;
+		in_ext->iJack			= 0;
+		midi_function[i++] = (struct usb_descriptor_header *) in_ext;
+
+		out_emb->bLength		= USB_DT_MIDI_OUT_SIZE(1);
+		out_emb->bDescriptorType	= USB_DT_CS_INTERFACE;
+		out_emb->bDescriptorSubtype	= USB_MS_MIDI_OUT_JACK;
+		out_emb->bJackType		= USB_MS_EMBEDDED;
+		out_emb->bJackID		= jack++;
+		out_emb->bNrInputPins		= 1;
+		out_emb->pins[0].baSourcePin	= 1;
+		out_emb->pins[0].baSourceID	= in_ext->bJackID;
+		out_emb->iJack			= 0;
+		midi_function[i++] = (struct usb_descriptor_header *) out_emb;
+
+		/* link it to the endpoint */
+		ms_in_desc.baAssocJackID[n] = out_emb->bJackID;
+	}
+
+	/* configure the external OUT jacks, each linked to an embedded IN jack */
+	for (n = 0; n < midi->out_ports; n++) {
+		struct usb_midi_in_jack_descriptor *in_emb = &jack_in_emb_desc[n];
+		struct usb_midi_out_jack_descriptor_1 *out_ext = &jack_out_ext_desc[n];
+
+		in_emb->bLength			= USB_DT_MIDI_IN_SIZE;
+		in_emb->bDescriptorType		= USB_DT_CS_INTERFACE;
+		in_emb->bDescriptorSubtype	= USB_MS_MIDI_IN_JACK;
+		in_emb->bJackType		= USB_MS_EMBEDDED;
+		in_emb->bJackID			= jack++;
+		in_emb->iJack			= 0;
+		midi_function[i++] = (struct usb_descriptor_header *) in_emb;
+
+		out_ext->bLength =		USB_DT_MIDI_OUT_SIZE(1);
+		out_ext->bDescriptorType =	USB_DT_CS_INTERFACE;
+		out_ext->bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK;
+		out_ext->bJackType =		USB_MS_EXTERNAL;
+		out_ext->bJackID =		jack++;
+		out_ext->bNrInputPins =		1;
+		out_ext->iJack =		0;
+		out_ext->pins[0].baSourceID =	in_emb->bJackID;
+		out_ext->pins[0].baSourcePin =	1;
+		midi_function[i++] = (struct usb_descriptor_header *) out_ext;
+
+		/* link it to the endpoint */
+		ms_out_desc.baAssocJackID[n] = in_emb->bJackID;
+	}
+
+	/* configure the endpoint descriptors ... */
+	ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports);
+	ms_out_desc.bNumEmbMIDIJack = midi->in_ports;
+
+	ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports);
+	ms_in_desc.bNumEmbMIDIJack = midi->out_ports;
+
+	/* ... and add them to the list */
+	endpoint_descriptor_index = i;
+	midi_function[i++] = (struct usb_descriptor_header *) &bulk_out_desc;
+	midi_function[i++] = (struct usb_descriptor_header *) &ms_out_desc;
+	midi_function[i++] = (struct usb_descriptor_header *) &bulk_in_desc;
+	midi_function[i++] = (struct usb_descriptor_header *) &ms_in_desc;
+	midi_function[i++] = NULL;
+
+	/*
+	 * support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+	/* copy descriptors, and track endpoint copies */
+	f->fs_descriptors = usb_copy_descriptors(midi_function);
+	if (!f->fs_descriptors)
+		goto fail_f_midi;
+
+	if (gadget_is_dualspeed(c->cdev->gadget)) {
+		bulk_in_desc.wMaxPacketSize = cpu_to_le16(512);
+		bulk_out_desc.wMaxPacketSize = cpu_to_le16(512);
+		f->hs_descriptors = usb_copy_descriptors(midi_function);
+		if (!f->hs_descriptors)
+			goto fail_f_midi;
+	}
+
+	if (gadget_is_superspeed(c->cdev->gadget)) {
+		bulk_in_desc.wMaxPacketSize = cpu_to_le16(1024);
+		bulk_out_desc.wMaxPacketSize = cpu_to_le16(1024);
+		i = endpoint_descriptor_index;
+		midi_function[i++] = (struct usb_descriptor_header *)
+				     &bulk_out_desc;
+		midi_function[i++] = (struct usb_descriptor_header *)
+				     &bulk_out_ss_comp_desc;
+		midi_function[i++] = (struct usb_descriptor_header *)
+				     &ms_out_desc;
+		midi_function[i++] = (struct usb_descriptor_header *)
+				     &bulk_in_desc;
+		midi_function[i++] = (struct usb_descriptor_header *)
+				     &bulk_in_ss_comp_desc;
+		midi_function[i++] = (struct usb_descriptor_header *)
+				     &ms_in_desc;
+		f->ss_descriptors = usb_copy_descriptors(midi_function);
+		if (!f->ss_descriptors)
+			goto fail_f_midi;
+
+		if (gadget_is_superspeed_plus(c->cdev->gadget)) {
+			f->ssp_descriptors = usb_copy_descriptors(midi_function);
+			if (!f->ssp_descriptors)
+				goto fail_f_midi;
+		}
+	}
+
+	kfree(midi_function);
+
+	return 0;
+
+fail_f_midi:
+	kfree(midi_function);
+	usb_free_all_descriptors(f);
+fail:
+	f_midi_unregister_card(midi);
+fail_register:
+	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+	return status;
+}
+
+static inline struct f_midi_opts *to_f_midi_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_midi_opts,
+			    func_inst.group);
+}
+
+static void midi_attr_release(struct config_item *item)
+{
+	struct f_midi_opts *opts = to_f_midi_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations midi_item_ops = {
+	.release	= midi_attr_release,
+};
+
+#define F_MIDI_OPT(name, test_limit, limit)				\
+static ssize_t f_midi_opts_##name##_show(struct config_item *item, char *page) \
+{									\
+	struct f_midi_opts *opts = to_f_midi_opts(item);		\
+	int result;							\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%u\n", opts->name);			\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t f_midi_opts_##name##_store(struct config_item *item,	\
+					 const char *page, size_t len)	\
+{									\
+	struct f_midi_opts *opts = to_f_midi_opts(item);		\
+	int ret;							\
+	u32 num;							\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt > 1) {						\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	ret = kstrtou32(page, 0, &num);					\
+	if (ret)							\
+		goto end;						\
+									\
+	if (test_limit && num > limit) {				\
+		ret = -EINVAL;						\
+		goto end;						\
+	}								\
+	opts->name = num;						\
+	ret = len;							\
+									\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+CONFIGFS_ATTR(f_midi_opts_, name);
+
+#define F_MIDI_OPT_SIGNED(name, test_limit, limit)				\
+static ssize_t f_midi_opts_##name##_show(struct config_item *item, char *page) \
+{									\
+	struct f_midi_opts *opts = to_f_midi_opts(item);		\
+	int result;							\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%d\n", opts->name);			\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t f_midi_opts_##name##_store(struct config_item *item,	\
+					 const char *page, size_t len)	\
+{									\
+	struct f_midi_opts *opts = to_f_midi_opts(item);		\
+	int ret;							\
+	s32 num;							\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt > 1) {						\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	ret = kstrtos32(page, 0, &num);					\
+	if (ret)							\
+		goto end;						\
+									\
+	if (test_limit && num > limit) {				\
+		ret = -EINVAL;						\
+		goto end;						\
+	}								\
+	opts->name = num;						\
+	ret = len;							\
+									\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+CONFIGFS_ATTR(f_midi_opts_, name);
+
+F_MIDI_OPT_SIGNED(index, true, SNDRV_CARDS);
+F_MIDI_OPT(buflen, false, 0);
+F_MIDI_OPT(qlen, false, 0);
+F_MIDI_OPT(in_ports, true, MAX_PORTS);
+F_MIDI_OPT(out_ports, true, MAX_PORTS);
+
+static ssize_t f_midi_opts_id_show(struct config_item *item, char *page)
+{
+	struct f_midi_opts *opts = to_f_midi_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	if (opts->id) {
+		result = strlcpy(page, opts->id, PAGE_SIZE);
+	} else {
+		page[0] = 0;
+		result = 0;
+	}
+
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_midi_opts_id_store(struct config_item *item,
+				    const char *page, size_t len)
+{
+	struct f_midi_opts *opts = to_f_midi_opts(item);
+	int ret;
+	char *c;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt > 1) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	c = kstrndup(page, len, GFP_KERNEL);
+	if (!c) {
+		ret = -ENOMEM;
+		goto end;
+	}
+	if (opts->id_allocated)
+		kfree(opts->id);
+	opts->id = c;
+	opts->id_allocated = true;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+CONFIGFS_ATTR(f_midi_opts_, id);
+
+static struct configfs_attribute *midi_attrs[] = {
+	&f_midi_opts_attr_index,
+	&f_midi_opts_attr_buflen,
+	&f_midi_opts_attr_qlen,
+	&f_midi_opts_attr_in_ports,
+	&f_midi_opts_attr_out_ports,
+	&f_midi_opts_attr_id,
+	NULL,
+};
+
+static const struct config_item_type midi_func_type = {
+	.ct_item_ops	= &midi_item_ops,
+	.ct_attrs	= midi_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void f_midi_free_inst(struct usb_function_instance *f)
+{
+	struct f_midi_opts *opts;
+	bool free = false;
+
+	opts = container_of(f, struct f_midi_opts, func_inst);
+
+	mutex_lock(&opts->lock);
+	if (!--opts->refcnt) {
+		free = true;
+	}
+	mutex_unlock(&opts->lock);
+
+	if (free) {
+		if (opts->id_allocated)
+			kfree(opts->id);
+		kfree(opts);
+	}
+}
+
+static struct usb_function_instance *f_midi_alloc_inst(void)
+{
+	struct f_midi_opts *opts;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&opts->lock);
+	opts->func_inst.free_func_inst = f_midi_free_inst;
+	opts->index = SNDRV_DEFAULT_IDX1;
+	opts->id = SNDRV_DEFAULT_STR1;
+	opts->buflen = 512;
+	opts->qlen = 32;
+	opts->in_ports = 1;
+	opts->out_ports = 1;
+	opts->refcnt = 1;
+
+	config_group_init_type_name(&opts->func_inst.group, "",
+				    &midi_func_type);
+
+	return &opts->func_inst;
+}
+
+static void f_midi_free(struct usb_function *f)
+{
+	struct f_midi *midi;
+	struct f_midi_opts *opts;
+	bool free = false;
+
+	midi = func_to_midi(f);
+	opts = container_of(f->fi, struct f_midi_opts, func_inst);
+	mutex_lock(&opts->lock);
+	if (!--midi->free_ref) {
+		kfree(midi->id);
+		kfifo_free(&midi->in_req_fifo);
+		kfree(midi);
+		free = true;
+	}
+	mutex_unlock(&opts->lock);
+
+	if (free)
+		f_midi_free_inst(&opts->func_inst);
+}
+
+static void f_midi_rmidi_free(struct snd_rawmidi *rmidi)
+{
+	f_midi_free(rmidi->private_data);
+}
+
+static void f_midi_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct f_midi *midi = func_to_midi(f);
+	struct snd_card *card;
+
+	DBG(cdev, "unbind\n");
+
+	/* just to be sure */
+	f_midi_disable(f);
+
+	card = midi->card;
+	midi->card = NULL;
+	if (card)
+		snd_card_free_when_closed(card);
+
+	usb_free_all_descriptors(f);
+}
+
+static struct usb_function *f_midi_alloc(struct usb_function_instance *fi)
+{
+	struct f_midi *midi = NULL;
+	struct f_midi_opts *opts;
+	int status, i;
+
+	opts = container_of(fi, struct f_midi_opts, func_inst);
+
+	mutex_lock(&opts->lock);
+	/* sanity check */
+	if (opts->in_ports > MAX_PORTS || opts->out_ports > MAX_PORTS) {
+		status = -EINVAL;
+		goto setup_fail;
+	}
+
+	/* allocate and initialize one new instance */
+	midi = kzalloc(struct_size(midi, in_ports_array, opts->in_ports),
+		       GFP_KERNEL);
+	if (!midi) {
+		status = -ENOMEM;
+		goto setup_fail;
+	}
+
+	for (i = 0; i < opts->in_ports; i++)
+		midi->in_ports_array[i].cable = i;
+
+	/* set up ALSA midi devices */
+	midi->id = kstrdup(opts->id, GFP_KERNEL);
+	if (opts->id && !midi->id) {
+		status = -ENOMEM;
+		goto midi_free;
+	}
+	midi->in_ports = opts->in_ports;
+	midi->out_ports = opts->out_ports;
+	midi->index = opts->index;
+	midi->buflen = opts->buflen;
+	midi->qlen = opts->qlen;
+	midi->in_last_port = 0;
+	midi->free_ref = 1;
+
+	status = kfifo_alloc(&midi->in_req_fifo, midi->qlen, GFP_KERNEL);
+	if (status)
+		goto midi_free;
+
+	spin_lock_init(&midi->transmit_lock);
+
+	++opts->refcnt;
+	mutex_unlock(&opts->lock);
+
+	midi->func.name		= "gmidi function";
+	midi->func.bind		= f_midi_bind;
+	midi->func.unbind	= f_midi_unbind;
+	midi->func.set_alt	= f_midi_set_alt;
+	midi->func.disable	= f_midi_disable;
+	midi->func.free_func	= f_midi_free;
+
+	return &midi->func;
+
+midi_free:
+	if (midi)
+		kfree(midi->id);
+	kfree(midi);
+setup_fail:
+	mutex_unlock(&opts->lock);
+
+	return ERR_PTR(status);
+}
+
+DECLARE_USB_FUNCTION_INIT(midi, f_midi_alloc_inst, f_midi_alloc);
diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
new file mode 100644
index 000000000..bbb6ff6b1
--- /dev/null
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -0,0 +1,1747 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_ncm.c -- USB CDC Network (NCM) link function driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Contact: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
+ *
+ * The driver borrows from f_ecm.c which is:
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/crc32.h>
+
+#include <linux/usb/cdc.h>
+
+#include "u_ether.h"
+#include "u_ether_configfs.h"
+#include "u_ncm.h"
+#include "configfs.h"
+
+/*
+ * This function is a "CDC Network Control Model" (CDC NCM) Ethernet link.
+ * NCM is intended to be used with high-speed network attachments.
+ *
+ * Note that NCM requires the use of "alternate settings" for its data
+ * interface.  This means that the set_alt() method has real work to do,
+ * and also means that a get_alt() method is required.
+ */
+
+/* to trigger crc/non-crc ndp signature */
+
+#define NCM_NDP_HDR_CRC		0x01000000
+
+enum ncm_notify_state {
+	NCM_NOTIFY_NONE,		/* don't notify */
+	NCM_NOTIFY_CONNECT,		/* issue CONNECT next */
+	NCM_NOTIFY_SPEED,		/* issue SPEED_CHANGE next */
+};
+
+struct f_ncm {
+	struct gether			port;
+	u8				ctrl_id, data_id;
+
+	char				ethaddr[14];
+
+	struct usb_ep			*notify;
+	struct usb_request		*notify_req;
+	u8				notify_state;
+	atomic_t			notify_count;
+	bool				is_open;
+
+	const struct ndp_parser_opts	*parser_opts;
+	bool				is_crc;
+	u32				ndp_sign;
+
+	/*
+	 * for notification, it is accessed from both
+	 * callback and ethernet open/close
+	 */
+	spinlock_t			lock;
+
+	struct net_device		*netdev;
+
+	/* For multi-frame NDP TX */
+	struct sk_buff			*skb_tx_data;
+	struct sk_buff			*skb_tx_ndp;
+	u16				ndp_dgram_count;
+	struct hrtimer			task_timer;
+};
+
+static inline struct f_ncm *func_to_ncm(struct usb_function *f)
+{
+	return container_of(f, struct f_ncm, port.func);
+}
+
+/* peak (theoretical) bulk transfer rate in bits-per-second */
+static inline unsigned ncm_bitrate(struct usb_gadget *g)
+{
+	if (!g)
+		return 0;
+	else if (gadget_is_superspeed(g) && g->speed >= USB_SPEED_SUPER_PLUS)
+		return 4250000000U;
+	else if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
+		return 3750000000U;
+	else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+		return 13 * 512 * 8 * 1000 * 8;
+	else
+		return 19 *  64 * 1 * 1000 * 8;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * We cannot group frames so use just the minimal size which ok to put
+ * one max-size ethernet frame.
+ * If the host can group frames, allow it to do that, 16K is selected,
+ * because it's used by default by the current linux host driver
+ */
+#define NTB_DEFAULT_IN_SIZE	16384
+#define NTB_OUT_SIZE		16384
+
+/* Allocation for storing the NDP, 32 should suffice for a
+ * 16k packet. This allows a maximum of 32 * 507 Byte packets to
+ * be transmitted in a single 16kB skb, though when sending full size
+ * packets this limit will be plenty.
+ * Smaller packets are not likely to be trying to maximize the
+ * throughput and will be mstly sending smaller infrequent frames.
+ */
+#define TX_MAX_NUM_DPE		32
+
+/* Delay for the transmit to wait before sending an unfilled NTB frame. */
+#define TX_TIMEOUT_NSECS	300000
+
+#define FORMATS_SUPPORTED	(USB_CDC_NCM_NTB16_SUPPORTED |	\
+				 USB_CDC_NCM_NTB32_SUPPORTED)
+
+static struct usb_cdc_ncm_ntb_parameters ntb_parameters = {
+	.wLength = cpu_to_le16(sizeof(ntb_parameters)),
+	.bmNtbFormatsSupported = cpu_to_le16(FORMATS_SUPPORTED),
+	.dwNtbInMaxSize = cpu_to_le32(NTB_DEFAULT_IN_SIZE),
+	.wNdpInDivisor = cpu_to_le16(4),
+	.wNdpInPayloadRemainder = cpu_to_le16(0),
+	.wNdpInAlignment = cpu_to_le16(4),
+
+	.dwNtbOutMaxSize = cpu_to_le32(NTB_OUT_SIZE),
+	.wNdpOutDivisor = cpu_to_le16(4),
+	.wNdpOutPayloadRemainder = cpu_to_le16(0),
+	.wNdpOutAlignment = cpu_to_le16(4),
+};
+
+/*
+ * Use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one
+ * packet, to simplify cancellation; and a big transfer interval, to
+ * waste less bandwidth.
+ */
+
+#define NCM_STATUS_INTERVAL_MS		32
+#define NCM_STATUS_BYTECOUNT		16	/* 8 byte header + data */
+
+static struct usb_interface_assoc_descriptor ncm_iad_desc = {
+	.bLength =		sizeof ncm_iad_desc,
+	.bDescriptorType =	USB_DT_INTERFACE_ASSOCIATION,
+
+	/* .bFirstInterface =	DYNAMIC, */
+	.bInterfaceCount =	2,	/* control + data */
+	.bFunctionClass =	USB_CLASS_COMM,
+	.bFunctionSubClass =	USB_CDC_SUBCLASS_NCM,
+	.bFunctionProtocol =	USB_CDC_PROTO_NONE,
+	/* .iFunction =		DYNAMIC */
+};
+
+/* interface descriptor: */
+
+static struct usb_interface_descriptor ncm_control_intf = {
+	.bLength =		sizeof ncm_control_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	/* .bInterfaceNumber = DYNAMIC */
+	.bNumEndpoints =	1,
+	.bInterfaceClass =	USB_CLASS_COMM,
+	.bInterfaceSubClass =	USB_CDC_SUBCLASS_NCM,
+	.bInterfaceProtocol =	USB_CDC_PROTO_NONE,
+	/* .iInterface = DYNAMIC */
+};
+
+static struct usb_cdc_header_desc ncm_header_desc = {
+	.bLength =		sizeof ncm_header_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
+
+	.bcdCDC =		cpu_to_le16(0x0110),
+};
+
+static struct usb_cdc_union_desc ncm_union_desc = {
+	.bLength =		sizeof(ncm_union_desc),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_UNION_TYPE,
+	/* .bMasterInterface0 =	DYNAMIC */
+	/* .bSlaveInterface0 =	DYNAMIC */
+};
+
+static struct usb_cdc_ether_desc ecm_desc = {
+	.bLength =		sizeof ecm_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_ETHERNET_TYPE,
+
+	/* this descriptor actually adds value, surprise! */
+	/* .iMACAddress = DYNAMIC */
+	.bmEthernetStatistics =	cpu_to_le32(0), /* no statistics */
+	.wMaxSegmentSize =	cpu_to_le16(ETH_FRAME_LEN),
+	.wNumberMCFilters =	cpu_to_le16(0),
+	.bNumberPowerFilters =	0,
+};
+
+#define NCAPS	(USB_CDC_NCM_NCAP_ETH_FILTER | USB_CDC_NCM_NCAP_CRC_MODE)
+
+static struct usb_cdc_ncm_desc ncm_desc = {
+	.bLength =		sizeof ncm_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_NCM_TYPE,
+
+	.bcdNcmVersion =	cpu_to_le16(0x0100),
+	/* can process SetEthernetPacketFilter */
+	.bmNetworkCapabilities = NCAPS,
+};
+
+/* the default data interface has no endpoints ... */
+
+static struct usb_interface_descriptor ncm_data_nop_intf = {
+	.bLength =		sizeof ncm_data_nop_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bInterfaceNumber =	1,
+	.bAlternateSetting =	0,
+	.bNumEndpoints =	0,
+	.bInterfaceClass =	USB_CLASS_CDC_DATA,
+	.bInterfaceSubClass =	0,
+	.bInterfaceProtocol =	USB_CDC_NCM_PROTO_NTB,
+	/* .iInterface = DYNAMIC */
+};
+
+/* ... but the "real" data interface has two bulk endpoints */
+
+static struct usb_interface_descriptor ncm_data_intf = {
+	.bLength =		sizeof ncm_data_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bInterfaceNumber =	1,
+	.bAlternateSetting =	1,
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_CDC_DATA,
+	.bInterfaceSubClass =	0,
+	.bInterfaceProtocol =	USB_CDC_NCM_PROTO_NTB,
+	/* .iInterface = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor fs_ncm_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(NCM_STATUS_BYTECOUNT),
+	.bInterval =		NCM_STATUS_INTERVAL_MS,
+};
+
+static struct usb_endpoint_descriptor fs_ncm_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor fs_ncm_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *ncm_fs_function[] = {
+	(struct usb_descriptor_header *) &ncm_iad_desc,
+	/* CDC NCM control descriptors */
+	(struct usb_descriptor_header *) &ncm_control_intf,
+	(struct usb_descriptor_header *) &ncm_header_desc,
+	(struct usb_descriptor_header *) &ncm_union_desc,
+	(struct usb_descriptor_header *) &ecm_desc,
+	(struct usb_descriptor_header *) &ncm_desc,
+	(struct usb_descriptor_header *) &fs_ncm_notify_desc,
+	/* data interface, altsettings 0 and 1 */
+	(struct usb_descriptor_header *) &ncm_data_nop_intf,
+	(struct usb_descriptor_header *) &ncm_data_intf,
+	(struct usb_descriptor_header *) &fs_ncm_in_desc,
+	(struct usb_descriptor_header *) &fs_ncm_out_desc,
+	NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor hs_ncm_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(NCM_STATUS_BYTECOUNT),
+	.bInterval =		USB_MS_TO_HS_INTERVAL(NCM_STATUS_INTERVAL_MS),
+};
+static struct usb_endpoint_descriptor hs_ncm_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor hs_ncm_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *ncm_hs_function[] = {
+	(struct usb_descriptor_header *) &ncm_iad_desc,
+	/* CDC NCM control descriptors */
+	(struct usb_descriptor_header *) &ncm_control_intf,
+	(struct usb_descriptor_header *) &ncm_header_desc,
+	(struct usb_descriptor_header *) &ncm_union_desc,
+	(struct usb_descriptor_header *) &ecm_desc,
+	(struct usb_descriptor_header *) &ncm_desc,
+	(struct usb_descriptor_header *) &hs_ncm_notify_desc,
+	/* data interface, altsettings 0 and 1 */
+	(struct usb_descriptor_header *) &ncm_data_nop_intf,
+	(struct usb_descriptor_header *) &ncm_data_intf,
+	(struct usb_descriptor_header *) &hs_ncm_in_desc,
+	(struct usb_descriptor_header *) &hs_ncm_out_desc,
+	NULL,
+};
+
+
+/* super speed support: */
+
+static struct usb_endpoint_descriptor ss_ncm_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(NCM_STATUS_BYTECOUNT),
+	.bInterval =		USB_MS_TO_HS_INTERVAL(NCM_STATUS_INTERVAL_MS)
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ncm_notify_comp_desc = {
+	.bLength =		sizeof(ss_ncm_notify_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 3 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+	.wBytesPerInterval =	cpu_to_le16(NCM_STATUS_BYTECOUNT),
+};
+
+static struct usb_endpoint_descriptor ss_ncm_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor ss_ncm_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ncm_bulk_comp_desc = {
+	.bLength =		sizeof(ss_ncm_bulk_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 2 values can be tweaked if necessary */
+	.bMaxBurst =		15,
+	/* .bmAttributes =	0, */
+};
+
+static struct usb_descriptor_header *ncm_ss_function[] = {
+	(struct usb_descriptor_header *) &ncm_iad_desc,
+	/* CDC NCM control descriptors */
+	(struct usb_descriptor_header *) &ncm_control_intf,
+	(struct usb_descriptor_header *) &ncm_header_desc,
+	(struct usb_descriptor_header *) &ncm_union_desc,
+	(struct usb_descriptor_header *) &ecm_desc,
+	(struct usb_descriptor_header *) &ncm_desc,
+	(struct usb_descriptor_header *) &ss_ncm_notify_desc,
+	(struct usb_descriptor_header *) &ss_ncm_notify_comp_desc,
+	/* data interface, altsettings 0 and 1 */
+	(struct usb_descriptor_header *) &ncm_data_nop_intf,
+	(struct usb_descriptor_header *) &ncm_data_intf,
+	(struct usb_descriptor_header *) &ss_ncm_in_desc,
+	(struct usb_descriptor_header *) &ss_ncm_bulk_comp_desc,
+	(struct usb_descriptor_header *) &ss_ncm_out_desc,
+	(struct usb_descriptor_header *) &ss_ncm_bulk_comp_desc,
+	NULL,
+};
+
+/* string descriptors: */
+
+#define STRING_CTRL_IDX	0
+#define STRING_MAC_IDX	1
+#define STRING_DATA_IDX	2
+#define STRING_IAD_IDX	3
+
+static struct usb_string ncm_string_defs[] = {
+	[STRING_CTRL_IDX].s = "CDC Network Control Model (NCM)",
+	[STRING_MAC_IDX].s = "",
+	[STRING_DATA_IDX].s = "CDC Network Data",
+	[STRING_IAD_IDX].s = "CDC NCM",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings ncm_string_table = {
+	.language =		0x0409,	/* en-us */
+	.strings =		ncm_string_defs,
+};
+
+static struct usb_gadget_strings *ncm_strings[] = {
+	&ncm_string_table,
+	NULL,
+};
+
+/*
+ * Here are options for NCM Datagram Pointer table (NDP) parser.
+ * There are 2 different formats: NDP16 and NDP32 in the spec (ch. 3),
+ * in NDP16 offsets and sizes fields are 1 16bit word wide,
+ * in NDP32 -- 2 16bit words wide. Also signatures are different.
+ * To make the parser code the same, put the differences in the structure,
+ * and switch pointers to the structures when the format is changed.
+ */
+
+struct ndp_parser_opts {
+	u32		nth_sign;
+	u32		ndp_sign;
+	unsigned	nth_size;
+	unsigned	ndp_size;
+	unsigned	dpe_size;
+	unsigned	ndplen_align;
+	/* sizes in u16 units */
+	unsigned	dgram_item_len; /* index or length */
+	unsigned	block_length;
+	unsigned	ndp_index;
+	unsigned	reserved1;
+	unsigned	reserved2;
+	unsigned	next_ndp_index;
+};
+
+static const struct ndp_parser_opts ndp16_opts = {
+	.nth_sign = USB_CDC_NCM_NTH16_SIGN,
+	.ndp_sign = USB_CDC_NCM_NDP16_NOCRC_SIGN,
+	.nth_size = sizeof(struct usb_cdc_ncm_nth16),
+	.ndp_size = sizeof(struct usb_cdc_ncm_ndp16),
+	.dpe_size = sizeof(struct usb_cdc_ncm_dpe16),
+	.ndplen_align = 4,
+	.dgram_item_len = 1,
+	.block_length = 1,
+	.ndp_index = 1,
+	.reserved1 = 0,
+	.reserved2 = 0,
+	.next_ndp_index = 1,
+};
+
+static const struct ndp_parser_opts ndp32_opts = {
+	.nth_sign = USB_CDC_NCM_NTH32_SIGN,
+	.ndp_sign = USB_CDC_NCM_NDP32_NOCRC_SIGN,
+	.nth_size = sizeof(struct usb_cdc_ncm_nth32),
+	.ndp_size = sizeof(struct usb_cdc_ncm_ndp32),
+	.dpe_size = sizeof(struct usb_cdc_ncm_dpe32),
+	.ndplen_align = 8,
+	.dgram_item_len = 2,
+	.block_length = 2,
+	.ndp_index = 2,
+	.reserved1 = 1,
+	.reserved2 = 2,
+	.next_ndp_index = 2,
+};
+
+static inline void put_ncm(__le16 **p, unsigned size, unsigned val)
+{
+	switch (size) {
+	case 1:
+		put_unaligned_le16((u16)val, *p);
+		break;
+	case 2:
+		put_unaligned_le32((u32)val, *p);
+
+		break;
+	default:
+		BUG();
+	}
+
+	*p += size;
+}
+
+static inline unsigned get_ncm(__le16 **p, unsigned size)
+{
+	unsigned tmp;
+
+	switch (size) {
+	case 1:
+		tmp = get_unaligned_le16(*p);
+		break;
+	case 2:
+		tmp = get_unaligned_le32(*p);
+		break;
+	default:
+		BUG();
+	}
+
+	*p += size;
+	return tmp;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline void ncm_reset_values(struct f_ncm *ncm)
+{
+	ncm->parser_opts = &ndp16_opts;
+	ncm->is_crc = false;
+	ncm->ndp_sign = ncm->parser_opts->ndp_sign;
+	ncm->port.cdc_filter = DEFAULT_FILTER;
+
+	/* doesn't make sense for ncm, fixed size used */
+	ncm->port.header_len = 0;
+
+	ncm->port.fixed_out_len = le32_to_cpu(ntb_parameters.dwNtbOutMaxSize);
+	ncm->port.fixed_in_len = NTB_DEFAULT_IN_SIZE;
+}
+
+/*
+ * Context: ncm->lock held
+ */
+static void ncm_do_notify(struct f_ncm *ncm)
+{
+	struct usb_request		*req = ncm->notify_req;
+	struct usb_cdc_notification	*event;
+	struct usb_composite_dev	*cdev = ncm->port.func.config->cdev;
+	__le32				*data;
+	int				status;
+
+	/* notification already in flight? */
+	if (atomic_read(&ncm->notify_count))
+		return;
+
+	event = req->buf;
+	switch (ncm->notify_state) {
+	case NCM_NOTIFY_NONE:
+		return;
+
+	case NCM_NOTIFY_CONNECT:
+		event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION;
+		if (ncm->is_open)
+			event->wValue = cpu_to_le16(1);
+		else
+			event->wValue = cpu_to_le16(0);
+		event->wLength = 0;
+		req->length = sizeof *event;
+
+		DBG(cdev, "notify connect %s\n",
+				ncm->is_open ? "true" : "false");
+		ncm->notify_state = NCM_NOTIFY_NONE;
+		break;
+
+	case NCM_NOTIFY_SPEED:
+		event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE;
+		event->wValue = cpu_to_le16(0);
+		event->wLength = cpu_to_le16(8);
+		req->length = NCM_STATUS_BYTECOUNT;
+
+		/* SPEED_CHANGE data is up/down speeds in bits/sec */
+		data = req->buf + sizeof *event;
+		data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget));
+		data[1] = data[0];
+
+		DBG(cdev, "notify speed %u\n", ncm_bitrate(cdev->gadget));
+		ncm->notify_state = NCM_NOTIFY_CONNECT;
+		break;
+	}
+	event->bmRequestType = 0xA1;
+	event->wIndex = cpu_to_le16(ncm->ctrl_id);
+
+	atomic_inc(&ncm->notify_count);
+
+	/*
+	 * In double buffering if there is a space in FIFO,
+	 * completion callback can be called right after the call,
+	 * so unlocking
+	 */
+	spin_unlock(&ncm->lock);
+	status = usb_ep_queue(ncm->notify, req, GFP_ATOMIC);
+	spin_lock(&ncm->lock);
+	if (status < 0) {
+		atomic_dec(&ncm->notify_count);
+		DBG(cdev, "notify --> %d\n", status);
+	}
+}
+
+/*
+ * Context: ncm->lock held
+ */
+static void ncm_notify(struct f_ncm *ncm)
+{
+	/*
+	 * NOTE on most versions of Linux, host side cdc-ethernet
+	 * won't listen for notifications until its netdevice opens.
+	 * The first notification then sits in the FIFO for a long
+	 * time, and the second one is queued.
+	 *
+	 * If ncm_notify() is called before the second (CONNECT)
+	 * notification is sent, then it will reset to send the SPEED
+	 * notificaion again (and again, and again), but it's not a problem
+	 */
+	ncm->notify_state = NCM_NOTIFY_SPEED;
+	ncm_do_notify(ncm);
+}
+
+static void ncm_notify_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_ncm			*ncm = req->context;
+	struct usb_composite_dev	*cdev = ncm->port.func.config->cdev;
+	struct usb_cdc_notification	*event = req->buf;
+
+	spin_lock(&ncm->lock);
+	switch (req->status) {
+	case 0:
+		VDBG(cdev, "Notification %02x sent\n",
+		     event->bNotificationType);
+		atomic_dec(&ncm->notify_count);
+		break;
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		atomic_set(&ncm->notify_count, 0);
+		ncm->notify_state = NCM_NOTIFY_NONE;
+		break;
+	default:
+		DBG(cdev, "event %02x --> %d\n",
+			event->bNotificationType, req->status);
+		atomic_dec(&ncm->notify_count);
+		break;
+	}
+	ncm_do_notify(ncm);
+	spin_unlock(&ncm->lock);
+}
+
+static void ncm_ep0out_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	/* now for SET_NTB_INPUT_SIZE only */
+	unsigned		in_size;
+	struct usb_function	*f = req->context;
+	struct f_ncm		*ncm = func_to_ncm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	req->context = NULL;
+	if (req->status || req->actual != req->length) {
+		DBG(cdev, "Bad control-OUT transfer\n");
+		goto invalid;
+	}
+
+	in_size = get_unaligned_le32(req->buf);
+	if (in_size < USB_CDC_NCM_NTB_MIN_IN_SIZE ||
+	    in_size > le32_to_cpu(ntb_parameters.dwNtbInMaxSize)) {
+		DBG(cdev, "Got wrong INPUT SIZE (%d) from host\n", in_size);
+		goto invalid;
+	}
+
+	ncm->port.fixed_in_len = in_size;
+	VDBG(cdev, "Set NTB INPUT SIZE %d\n", in_size);
+	return;
+
+invalid:
+	usb_ep_set_halt(ep);
+	return;
+}
+
+static int ncm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+	struct f_ncm		*ncm = func_to_ncm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	int			value = -EOPNOTSUPP;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	/*
+	 * composite driver infrastructure handles everything except
+	 * CDC class messages; interface activation uses set_alt().
+	 */
+	switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+			| USB_CDC_SET_ETHERNET_PACKET_FILTER:
+		/*
+		 * see 6.2.30: no data, wIndex = interface,
+		 * wValue = packet filter bitmap
+		 */
+		if (w_length != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		DBG(cdev, "packet filter %02x\n", w_value);
+		/*
+		 * REVISIT locking of cdc_filter.  This assumes the UDC
+		 * driver won't have a concurrent packet TX irq running on
+		 * another CPU; or that if it does, this write is atomic...
+		 */
+		ncm->port.cdc_filter = w_value;
+		value = 0;
+		break;
+	/*
+	 * and optionally:
+	 * case USB_CDC_SEND_ENCAPSULATED_COMMAND:
+	 * case USB_CDC_GET_ENCAPSULATED_RESPONSE:
+	 * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS:
+	 * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER:
+	 * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER:
+	 * case USB_CDC_GET_ETHERNET_STATISTIC:
+	 */
+
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_GET_NTB_PARAMETERS:
+
+		if (w_length == 0 || w_value != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		value = w_length > sizeof ntb_parameters ?
+			sizeof ntb_parameters : w_length;
+		memcpy(req->buf, &ntb_parameters, value);
+		VDBG(cdev, "Host asked NTB parameters\n");
+		break;
+
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_GET_NTB_INPUT_SIZE:
+
+		if (w_length < 4 || w_value != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		put_unaligned_le32(ncm->port.fixed_in_len, req->buf);
+		value = 4;
+		VDBG(cdev, "Host asked INPUT SIZE, sending %d\n",
+		     ncm->port.fixed_in_len);
+		break;
+
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_SET_NTB_INPUT_SIZE:
+	{
+		if (w_length != 4 || w_value != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		req->complete = ncm_ep0out_complete;
+		req->length = w_length;
+		req->context = f;
+
+		value = req->length;
+		break;
+	}
+
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_GET_NTB_FORMAT:
+	{
+		uint16_t format;
+
+		if (w_length < 2 || w_value != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		format = (ncm->parser_opts == &ndp16_opts) ? 0x0000 : 0x0001;
+		put_unaligned_le16(format, req->buf);
+		value = 2;
+		VDBG(cdev, "Host asked NTB FORMAT, sending %d\n", format);
+		break;
+	}
+
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_SET_NTB_FORMAT:
+	{
+		if (w_length != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		switch (w_value) {
+		case 0x0000:
+			ncm->parser_opts = &ndp16_opts;
+			DBG(cdev, "NCM16 selected\n");
+			break;
+		case 0x0001:
+			ncm->parser_opts = &ndp32_opts;
+			DBG(cdev, "NCM32 selected\n");
+			break;
+		default:
+			goto invalid;
+		}
+		value = 0;
+		break;
+	}
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_GET_CRC_MODE:
+	{
+		uint16_t is_crc;
+
+		if (w_length < 2 || w_value != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		is_crc = ncm->is_crc ? 0x0001 : 0x0000;
+		put_unaligned_le16(is_crc, req->buf);
+		value = 2;
+		VDBG(cdev, "Host asked CRC MODE, sending %d\n", is_crc);
+		break;
+	}
+
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_SET_CRC_MODE:
+	{
+		if (w_length != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		switch (w_value) {
+		case 0x0000:
+			ncm->is_crc = false;
+			DBG(cdev, "non-CRC mode selected\n");
+			break;
+		case 0x0001:
+			ncm->is_crc = true;
+			DBG(cdev, "CRC mode selected\n");
+			break;
+		default:
+			goto invalid;
+		}
+		value = 0;
+		break;
+	}
+
+	/* and disabled in ncm descriptor: */
+	/* case USB_CDC_GET_NET_ADDRESS: */
+	/* case USB_CDC_SET_NET_ADDRESS: */
+	/* case USB_CDC_GET_MAX_DATAGRAM_SIZE: */
+	/* case USB_CDC_SET_MAX_DATAGRAM_SIZE: */
+
+	default:
+invalid:
+		DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+	}
+	ncm->ndp_sign = ncm->parser_opts->ndp_sign |
+		(ncm->is_crc ? NCM_NDP_HDR_CRC : 0);
+
+	/* respond with data transfer or status phase? */
+	if (value >= 0) {
+		DBG(cdev, "ncm req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+		req->zero = 0;
+		req->length = value;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0)
+			ERROR(cdev, "ncm req %02x.%02x response err %d\n",
+					ctrl->bRequestType, ctrl->bRequest,
+					value);
+	}
+
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+
+static int ncm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_ncm		*ncm = func_to_ncm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	/* Control interface has only altsetting 0 */
+	if (intf == ncm->ctrl_id) {
+		if (alt != 0)
+			goto fail;
+
+		DBG(cdev, "reset ncm control %d\n", intf);
+		usb_ep_disable(ncm->notify);
+
+		if (!(ncm->notify->desc)) {
+			DBG(cdev, "init ncm ctrl %d\n", intf);
+			if (config_ep_by_speed(cdev->gadget, f, ncm->notify))
+				goto fail;
+		}
+		usb_ep_enable(ncm->notify);
+
+	/* Data interface has two altsettings, 0 and 1 */
+	} else if (intf == ncm->data_id) {
+		if (alt > 1)
+			goto fail;
+
+		if (ncm->port.in_ep->enabled) {
+			DBG(cdev, "reset ncm\n");
+			ncm->netdev = NULL;
+			gether_disconnect(&ncm->port);
+			ncm_reset_values(ncm);
+		}
+
+		/*
+		 * CDC Network only sends data in non-default altsettings.
+		 * Changing altsettings resets filters, statistics, etc.
+		 */
+		if (alt == 1) {
+			struct net_device	*net;
+
+			if (!ncm->port.in_ep->desc ||
+			    !ncm->port.out_ep->desc) {
+				DBG(cdev, "init ncm\n");
+				if (config_ep_by_speed(cdev->gadget, f,
+						       ncm->port.in_ep) ||
+				    config_ep_by_speed(cdev->gadget, f,
+						       ncm->port.out_ep)) {
+					ncm->port.in_ep->desc = NULL;
+					ncm->port.out_ep->desc = NULL;
+					goto fail;
+				}
+			}
+
+			/* TODO */
+			/* Enable zlps by default for NCM conformance;
+			 * override for musb_hdrc (avoids txdma ovhead)
+			 */
+			ncm->port.is_zlp_ok =
+				gadget_is_zlp_supported(cdev->gadget);
+			ncm->port.cdc_filter = DEFAULT_FILTER;
+			DBG(cdev, "activate ncm\n");
+			net = gether_connect(&ncm->port);
+			if (IS_ERR(net))
+				return PTR_ERR(net);
+			ncm->netdev = net;
+		}
+
+		spin_lock(&ncm->lock);
+		ncm_notify(ncm);
+		spin_unlock(&ncm->lock);
+	} else
+		goto fail;
+
+	return 0;
+fail:
+	return -EINVAL;
+}
+
+/*
+ * Because the data interface supports multiple altsettings,
+ * this NCM function *MUST* implement a get_alt() method.
+ */
+static int ncm_get_alt(struct usb_function *f, unsigned intf)
+{
+	struct f_ncm		*ncm = func_to_ncm(f);
+
+	if (intf == ncm->ctrl_id)
+		return 0;
+	return ncm->port.in_ep->enabled ? 1 : 0;
+}
+
+static struct sk_buff *package_for_tx(struct f_ncm *ncm)
+{
+	__le16		*ntb_iter;
+	struct sk_buff	*skb2 = NULL;
+	unsigned	ndp_pad;
+	unsigned	ndp_index;
+	unsigned	new_len;
+
+	const struct ndp_parser_opts *opts = ncm->parser_opts;
+	const int ndp_align = le16_to_cpu(ntb_parameters.wNdpInAlignment);
+	const int dgram_idx_len = 2 * 2 * opts->dgram_item_len;
+
+	/* Stop the timer */
+	hrtimer_try_to_cancel(&ncm->task_timer);
+
+	ndp_pad = ALIGN(ncm->skb_tx_data->len, ndp_align) -
+			ncm->skb_tx_data->len;
+	ndp_index = ncm->skb_tx_data->len + ndp_pad;
+	new_len = ndp_index + dgram_idx_len + ncm->skb_tx_ndp->len;
+
+	/* Set the final BlockLength and wNdpIndex */
+	ntb_iter = (void *) ncm->skb_tx_data->data;
+	/* Increment pointer to BlockLength */
+	ntb_iter += 2 + 1 + 1;
+	put_ncm(&ntb_iter, opts->block_length, new_len);
+	put_ncm(&ntb_iter, opts->ndp_index, ndp_index);
+
+	/* Set the final NDP wLength */
+	new_len = opts->ndp_size +
+			(ncm->ndp_dgram_count * dgram_idx_len);
+	ncm->ndp_dgram_count = 0;
+	/* Increment from start to wLength */
+	ntb_iter = (void *) ncm->skb_tx_ndp->data;
+	ntb_iter += 2;
+	put_unaligned_le16(new_len, ntb_iter);
+
+	/* Merge the skbs */
+	swap(skb2, ncm->skb_tx_data);
+	if (ncm->skb_tx_data) {
+		dev_consume_skb_any(ncm->skb_tx_data);
+		ncm->skb_tx_data = NULL;
+	}
+
+	/* Insert NDP alignment. */
+	skb_put_zero(skb2, ndp_pad);
+
+	/* Copy NTB across. */
+	skb_put_data(skb2, ncm->skb_tx_ndp->data, ncm->skb_tx_ndp->len);
+	dev_consume_skb_any(ncm->skb_tx_ndp);
+	ncm->skb_tx_ndp = NULL;
+
+	/* Insert zero'd datagram. */
+	skb_put_zero(skb2, dgram_idx_len);
+
+	return skb2;
+}
+
+static struct sk_buff *ncm_wrap_ntb(struct gether *port,
+				    struct sk_buff *skb)
+{
+	struct f_ncm	*ncm = func_to_ncm(&port->func);
+	struct sk_buff	*skb2 = NULL;
+
+	if (skb) {
+		int		ncb_len = 0;
+		__le16		*ntb_data;
+		__le16		*ntb_ndp;
+		int		dgram_pad;
+
+		unsigned	max_size = ncm->port.fixed_in_len;
+		const struct ndp_parser_opts *opts = ncm->parser_opts;
+		const int ndp_align = le16_to_cpu(ntb_parameters.wNdpInAlignment);
+		const int div = le16_to_cpu(ntb_parameters.wNdpInDivisor);
+		const int rem = le16_to_cpu(ntb_parameters.wNdpInPayloadRemainder);
+		const int dgram_idx_len = 2 * 2 * opts->dgram_item_len;
+
+		/* Add the CRC if required up front */
+		if (ncm->is_crc) {
+			uint32_t	crc;
+			__le16		*crc_pos;
+
+			crc = ~crc32_le(~0,
+					skb->data,
+					skb->len);
+			crc_pos = skb_put(skb, sizeof(uint32_t));
+			put_unaligned_le32(crc, crc_pos);
+		}
+
+		/* If the new skb is too big for the current NCM NTB then
+		 * set the current stored skb to be sent now and clear it
+		 * ready for new data.
+		 * NOTE: Assume maximum align for speed of calculation.
+		 */
+		if (ncm->skb_tx_data
+		    && (ncm->ndp_dgram_count >= TX_MAX_NUM_DPE
+		    || (ncm->skb_tx_data->len +
+		    div + rem + skb->len +
+		    ncm->skb_tx_ndp->len + ndp_align + (2 * dgram_idx_len))
+		    > max_size)) {
+			skb2 = package_for_tx(ncm);
+			if (!skb2)
+				goto err;
+		}
+
+		if (!ncm->skb_tx_data) {
+			ncb_len = opts->nth_size;
+			dgram_pad = ALIGN(ncb_len, div) + rem - ncb_len;
+			ncb_len += dgram_pad;
+
+			/* Create a new skb for the NTH and datagrams. */
+			ncm->skb_tx_data = alloc_skb(max_size, GFP_ATOMIC);
+			if (!ncm->skb_tx_data)
+				goto err;
+
+			ncm->skb_tx_data->dev = ncm->netdev;
+			ntb_data = skb_put_zero(ncm->skb_tx_data, ncb_len);
+			/* dwSignature */
+			put_unaligned_le32(opts->nth_sign, ntb_data);
+			ntb_data += 2;
+			/* wHeaderLength */
+			put_unaligned_le16(opts->nth_size, ntb_data++);
+
+			/* Allocate an skb for storing the NDP,
+			 * TX_MAX_NUM_DPE should easily suffice for a
+			 * 16k packet.
+			 */
+			ncm->skb_tx_ndp = alloc_skb((int)(opts->ndp_size
+						    + opts->dpe_size
+						    * TX_MAX_NUM_DPE),
+						    GFP_ATOMIC);
+			if (!ncm->skb_tx_ndp)
+				goto err;
+
+			ncm->skb_tx_ndp->dev = ncm->netdev;
+			ntb_ndp = skb_put(ncm->skb_tx_ndp, opts->ndp_size);
+			memset(ntb_ndp, 0, ncb_len);
+			/* dwSignature */
+			put_unaligned_le32(ncm->ndp_sign, ntb_ndp);
+			ntb_ndp += 2;
+
+			/* There is always a zeroed entry */
+			ncm->ndp_dgram_count = 1;
+
+			/* Note: we skip opts->next_ndp_index */
+
+			/* Start the timer. */
+			hrtimer_start(&ncm->task_timer, TX_TIMEOUT_NSECS,
+				      HRTIMER_MODE_REL_SOFT);
+		}
+
+		/* Add the datagram position entries */
+		ntb_ndp = skb_put_zero(ncm->skb_tx_ndp, dgram_idx_len);
+
+		ncb_len = ncm->skb_tx_data->len;
+		dgram_pad = ALIGN(ncb_len, div) + rem - ncb_len;
+		ncb_len += dgram_pad;
+
+		/* (d)wDatagramIndex */
+		put_ncm(&ntb_ndp, opts->dgram_item_len, ncb_len);
+		/* (d)wDatagramLength */
+		put_ncm(&ntb_ndp, opts->dgram_item_len, skb->len);
+		ncm->ndp_dgram_count++;
+
+		/* Add the new data to the skb */
+		skb_put_zero(ncm->skb_tx_data, dgram_pad);
+		skb_put_data(ncm->skb_tx_data, skb->data, skb->len);
+		dev_consume_skb_any(skb);
+		skb = NULL;
+
+	} else if (ncm->skb_tx_data) {
+		/* If we get here ncm_wrap_ntb() was called with NULL skb,
+		 * because eth_start_xmit() was called with NULL skb by
+		 * ncm_tx_timeout() - hence, this is our signal to flush/send.
+		 */
+		skb2 = package_for_tx(ncm);
+		if (!skb2)
+			goto err;
+	}
+
+	return skb2;
+
+err:
+	ncm->netdev->stats.tx_dropped++;
+
+	if (skb)
+		dev_kfree_skb_any(skb);
+	if (ncm->skb_tx_data)
+		dev_kfree_skb_any(ncm->skb_tx_data);
+	if (ncm->skb_tx_ndp)
+		dev_kfree_skb_any(ncm->skb_tx_ndp);
+
+	return NULL;
+}
+
+/*
+ * The transmit should only be run if no skb data has been sent
+ * for a certain duration.
+ */
+static enum hrtimer_restart ncm_tx_timeout(struct hrtimer *data)
+{
+	struct f_ncm *ncm = container_of(data, struct f_ncm, task_timer);
+	struct net_device *netdev = READ_ONCE(ncm->netdev);
+
+	if (netdev) {
+		/* XXX This allowance of a NULL skb argument to ndo_start_xmit
+		 * XXX is not sane.  The gadget layer should be redesigned so
+		 * XXX that the dev->wrap() invocations to build SKBs is transparent
+		 * XXX and performed in some way outside of the ndo_start_xmit
+		 * XXX interface.
+		 *
+		 * This will call directly into u_ether's eth_start_xmit()
+		 */
+		netdev->netdev_ops->ndo_start_xmit(NULL, netdev);
+	}
+	return HRTIMER_NORESTART;
+}
+
+static int ncm_unwrap_ntb(struct gether *port,
+			  struct sk_buff *skb,
+			  struct sk_buff_head *list)
+{
+	struct f_ncm	*ncm = func_to_ncm(&port->func);
+	unsigned char	*ntb_ptr = skb->data;
+	__le16		*tmp;
+	unsigned	index, index2;
+	int		ndp_index;
+	unsigned	dg_len, dg_len2;
+	unsigned	ndp_len;
+	unsigned	block_len;
+	struct sk_buff	*skb2;
+	int		ret = -EINVAL;
+	unsigned	ntb_max = le32_to_cpu(ntb_parameters.dwNtbOutMaxSize);
+	unsigned	frame_max = le16_to_cpu(ecm_desc.wMaxSegmentSize);
+	const struct ndp_parser_opts *opts = ncm->parser_opts;
+	unsigned	crc_len = ncm->is_crc ? sizeof(uint32_t) : 0;
+	int		dgram_counter;
+	int		to_process = skb->len;
+
+parse_ntb:
+	tmp = (__le16 *)ntb_ptr;
+
+	/* dwSignature */
+	if (get_unaligned_le32(tmp) != opts->nth_sign) {
+		INFO(port->func.config->cdev, "Wrong NTH SIGN, skblen %d\n",
+			skb->len);
+		print_hex_dump(KERN_INFO, "HEAD:", DUMP_PREFIX_ADDRESS, 32, 1,
+			       skb->data, 32, false);
+
+		goto err;
+	}
+	tmp += 2;
+	/* wHeaderLength */
+	if (get_unaligned_le16(tmp++) != opts->nth_size) {
+		INFO(port->func.config->cdev, "Wrong NTB headersize\n");
+		goto err;
+	}
+	tmp++; /* skip wSequence */
+
+	block_len = get_ncm(&tmp, opts->block_length);
+	/* (d)wBlockLength */
+	if (block_len > ntb_max) {
+		INFO(port->func.config->cdev, "OUT size exceeded\n");
+		goto err;
+	}
+
+	ndp_index = get_ncm(&tmp, opts->ndp_index);
+
+	/* Run through all the NDP's in the NTB */
+	do {
+		/*
+		 * NCM 3.2
+		 * dwNdpIndex
+		 */
+		if (((ndp_index % 4) != 0) ||
+				(ndp_index < opts->nth_size) ||
+				(ndp_index > (block_len -
+					      opts->ndp_size))) {
+			INFO(port->func.config->cdev, "Bad index: %#X\n",
+			     ndp_index);
+			goto err;
+		}
+
+		/*
+		 * walk through NDP
+		 * dwSignature
+		 */
+		tmp = (__le16 *)(ntb_ptr + ndp_index);
+		if (get_unaligned_le32(tmp) != ncm->ndp_sign) {
+			INFO(port->func.config->cdev, "Wrong NDP SIGN\n");
+			goto err;
+		}
+		tmp += 2;
+
+		ndp_len = get_unaligned_le16(tmp++);
+		/*
+		 * NCM 3.3.1
+		 * wLength
+		 * entry is 2 items
+		 * item size is 16/32 bits, opts->dgram_item_len * 2 bytes
+		 * minimal: struct usb_cdc_ncm_ndpX + normal entry + zero entry
+		 * Each entry is a dgram index and a dgram length.
+		 */
+		if ((ndp_len < opts->ndp_size
+				+ 2 * 2 * (opts->dgram_item_len * 2)) ||
+				(ndp_len % opts->ndplen_align != 0)) {
+			INFO(port->func.config->cdev, "Bad NDP length: %#X\n",
+			     ndp_len);
+			goto err;
+		}
+		tmp += opts->reserved1;
+		/* Check for another NDP (d)wNextNdpIndex */
+		ndp_index = get_ncm(&tmp, opts->next_ndp_index);
+		tmp += opts->reserved2;
+
+		ndp_len -= opts->ndp_size;
+		index2 = get_ncm(&tmp, opts->dgram_item_len);
+		dg_len2 = get_ncm(&tmp, opts->dgram_item_len);
+		dgram_counter = 0;
+
+		do {
+			index = index2;
+			/* wDatagramIndex[0] */
+			if ((index < opts->nth_size) ||
+					(index > block_len - opts->dpe_size)) {
+				INFO(port->func.config->cdev,
+				     "Bad index: %#X\n", index);
+				goto err;
+			}
+
+			dg_len = dg_len2;
+			/*
+			 * wDatagramLength[0]
+			 * ethernet hdr + crc or larger than max frame size
+			 */
+			if ((dg_len < 14 + crc_len) ||
+					(dg_len > frame_max)) {
+				INFO(port->func.config->cdev,
+				     "Bad dgram length: %#X\n", dg_len);
+				goto err;
+			}
+			if (ncm->is_crc) {
+				uint32_t crc, crc2;
+
+				crc = get_unaligned_le32(ntb_ptr +
+							 index + dg_len -
+							 crc_len);
+				crc2 = ~crc32_le(~0,
+						 ntb_ptr + index,
+						 dg_len - crc_len);
+				if (crc != crc2) {
+					INFO(port->func.config->cdev,
+					     "Bad CRC\n");
+					goto err;
+				}
+			}
+
+			index2 = get_ncm(&tmp, opts->dgram_item_len);
+			dg_len2 = get_ncm(&tmp, opts->dgram_item_len);
+
+			/* wDatagramIndex[1] */
+			if (index2 > block_len - opts->dpe_size) {
+				INFO(port->func.config->cdev,
+				     "Bad index: %#X\n", index2);
+				goto err;
+			}
+
+			/*
+			 * Copy the data into a new skb.
+			 * This ensures the truesize is correct
+			 */
+			skb2 = netdev_alloc_skb_ip_align(ncm->netdev,
+							 dg_len - crc_len);
+			if (skb2 == NULL)
+				goto err;
+			skb_put_data(skb2, ntb_ptr + index,
+				     dg_len - crc_len);
+
+			skb_queue_tail(list, skb2);
+
+			ndp_len -= 2 * (opts->dgram_item_len * 2);
+
+			dgram_counter++;
+			if (index2 == 0 || dg_len2 == 0)
+				break;
+		} while (ndp_len > 2 * (opts->dgram_item_len * 2));
+	} while (ndp_index);
+
+	VDBG(port->func.config->cdev,
+	     "Parsed NTB with %d frames\n", dgram_counter);
+
+	to_process -= block_len;
+	if (to_process != 0) {
+		ntb_ptr = (unsigned char *)(ntb_ptr + block_len);
+		goto parse_ntb;
+	}
+
+	dev_consume_skb_any(skb);
+
+	return 0;
+err:
+	skb_queue_purge(list);
+	dev_kfree_skb_any(skb);
+	return ret;
+}
+
+static void ncm_disable(struct usb_function *f)
+{
+	struct f_ncm		*ncm = func_to_ncm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	DBG(cdev, "ncm deactivated\n");
+
+	if (ncm->port.in_ep->enabled) {
+		ncm->netdev = NULL;
+		gether_disconnect(&ncm->port);
+	}
+
+	if (ncm->notify->enabled) {
+		usb_ep_disable(ncm->notify);
+		ncm->notify->desc = NULL;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Callbacks let us notify the host about connect/disconnect when the
+ * net device is opened or closed.
+ *
+ * For testing, note that link states on this side include both opened
+ * and closed variants of:
+ *
+ *   - disconnected/unconfigured
+ *   - configured but inactive (data alt 0)
+ *   - configured and active (data alt 1)
+ *
+ * Each needs to be tested with unplug, rmmod, SET_CONFIGURATION, and
+ * SET_INTERFACE (altsetting).  Remember also that "configured" doesn't
+ * imply the host is actually polling the notification endpoint, and
+ * likewise that "active" doesn't imply it's actually using the data
+ * endpoints for traffic.
+ */
+
+static void ncm_open(struct gether *geth)
+{
+	struct f_ncm		*ncm = func_to_ncm(&geth->func);
+
+	DBG(ncm->port.func.config->cdev, "%s\n", __func__);
+
+	spin_lock(&ncm->lock);
+	ncm->is_open = true;
+	ncm_notify(ncm);
+	spin_unlock(&ncm->lock);
+}
+
+static void ncm_close(struct gether *geth)
+{
+	struct f_ncm		*ncm = func_to_ncm(&geth->func);
+
+	DBG(ncm->port.func.config->cdev, "%s\n", __func__);
+
+	spin_lock(&ncm->lock);
+	ncm->is_open = false;
+	ncm_notify(ncm);
+	spin_unlock(&ncm->lock);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* ethernet function driver setup/binding */
+
+static int ncm_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_ncm		*ncm = func_to_ncm(f);
+	struct usb_string	*us;
+	int			status = 0;
+	struct usb_ep		*ep;
+	struct f_ncm_opts	*ncm_opts;
+
+	if (!can_support_ecm(cdev->gadget))
+		return -EINVAL;
+
+	ncm_opts = container_of(f->fi, struct f_ncm_opts, func_inst);
+
+	if (cdev->use_os_string) {
+		f->os_desc_table = kzalloc(sizeof(*f->os_desc_table),
+					   GFP_KERNEL);
+		if (!f->os_desc_table)
+			return -ENOMEM;
+		f->os_desc_n = 1;
+		f->os_desc_table[0].os_desc = &ncm_opts->ncm_os_desc;
+	}
+
+	mutex_lock(&ncm_opts->lock);
+	gether_set_gadget(ncm_opts->net, cdev->gadget);
+	if (!ncm_opts->bound)
+		status = gether_register_netdev(ncm_opts->net);
+	mutex_unlock(&ncm_opts->lock);
+
+	if (status)
+		goto fail;
+
+	ncm_opts->bound = true;
+
+	us = usb_gstrings_attach(cdev, ncm_strings,
+				 ARRAY_SIZE(ncm_string_defs));
+	if (IS_ERR(us)) {
+		status = PTR_ERR(us);
+		goto fail;
+	}
+	ncm_control_intf.iInterface = us[STRING_CTRL_IDX].id;
+	ncm_data_nop_intf.iInterface = us[STRING_DATA_IDX].id;
+	ncm_data_intf.iInterface = us[STRING_DATA_IDX].id;
+	ecm_desc.iMACAddress = us[STRING_MAC_IDX].id;
+	ncm_iad_desc.iFunction = us[STRING_IAD_IDX].id;
+
+	/* allocate instance-specific interface IDs */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	ncm->ctrl_id = status;
+	ncm_iad_desc.bFirstInterface = status;
+
+	ncm_control_intf.bInterfaceNumber = status;
+	ncm_union_desc.bMasterInterface0 = status;
+
+	if (cdev->use_os_string)
+		f->os_desc_table[0].if_id =
+			ncm_iad_desc.bFirstInterface;
+
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	ncm->data_id = status;
+
+	ncm_data_nop_intf.bInterfaceNumber = status;
+	ncm_data_intf.bInterfaceNumber = status;
+	ncm_union_desc.bSlaveInterface0 = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_ncm_in_desc);
+	if (!ep)
+		goto fail;
+	ncm->port.in_ep = ep;
+
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_ncm_out_desc);
+	if (!ep)
+		goto fail;
+	ncm->port.out_ep = ep;
+
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_ncm_notify_desc);
+	if (!ep)
+		goto fail;
+	ncm->notify = ep;
+
+	status = -ENOMEM;
+
+	/* allocate notification request and buffer */
+	ncm->notify_req = usb_ep_alloc_request(ep, GFP_KERNEL);
+	if (!ncm->notify_req)
+		goto fail;
+	ncm->notify_req->buf = kmalloc(NCM_STATUS_BYTECOUNT, GFP_KERNEL);
+	if (!ncm->notify_req->buf)
+		goto fail;
+	ncm->notify_req->context = ncm;
+	ncm->notify_req->complete = ncm_notify_complete;
+
+	/*
+	 * support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+	hs_ncm_in_desc.bEndpointAddress = fs_ncm_in_desc.bEndpointAddress;
+	hs_ncm_out_desc.bEndpointAddress = fs_ncm_out_desc.bEndpointAddress;
+	hs_ncm_notify_desc.bEndpointAddress =
+		fs_ncm_notify_desc.bEndpointAddress;
+
+	ss_ncm_in_desc.bEndpointAddress = fs_ncm_in_desc.bEndpointAddress;
+	ss_ncm_out_desc.bEndpointAddress = fs_ncm_out_desc.bEndpointAddress;
+	ss_ncm_notify_desc.bEndpointAddress =
+		fs_ncm_notify_desc.bEndpointAddress;
+
+	status = usb_assign_descriptors(f, ncm_fs_function, ncm_hs_function,
+			ncm_ss_function, ncm_ss_function);
+	if (status)
+		goto fail;
+
+	/*
+	 * NOTE:  all that is done without knowing or caring about
+	 * the network link ... which is unavailable to this code
+	 * until we're activated via set_alt().
+	 */
+
+	ncm->port.open = ncm_open;
+	ncm->port.close = ncm_close;
+
+	hrtimer_init(&ncm->task_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_SOFT);
+	ncm->task_timer.function = ncm_tx_timeout;
+
+	DBG(cdev, "CDC Network: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+			gadget_is_superspeed(c->cdev->gadget) ? "super" :
+			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+			ncm->port.in_ep->name, ncm->port.out_ep->name,
+			ncm->notify->name);
+	return 0;
+
+fail:
+	kfree(f->os_desc_table);
+	f->os_desc_n = 0;
+
+	if (ncm->notify_req) {
+		kfree(ncm->notify_req->buf);
+		usb_ep_free_request(ncm->notify, ncm->notify_req);
+	}
+
+	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+	return status;
+}
+
+static inline struct f_ncm_opts *to_f_ncm_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_ncm_opts,
+			    func_inst.group);
+}
+
+/* f_ncm_item_ops */
+USB_ETHERNET_CONFIGFS_ITEM(ncm);
+
+/* f_ncm_opts_dev_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(ncm);
+
+/* f_ncm_opts_host_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(ncm);
+
+/* f_ncm_opts_qmult */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(ncm);
+
+/* f_ncm_opts_ifname */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(ncm);
+
+static struct configfs_attribute *ncm_attrs[] = {
+	&ncm_opts_attr_dev_addr,
+	&ncm_opts_attr_host_addr,
+	&ncm_opts_attr_qmult,
+	&ncm_opts_attr_ifname,
+	NULL,
+};
+
+static const struct config_item_type ncm_func_type = {
+	.ct_item_ops	= &ncm_item_ops,
+	.ct_attrs	= ncm_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void ncm_free_inst(struct usb_function_instance *f)
+{
+	struct f_ncm_opts *opts;
+
+	opts = container_of(f, struct f_ncm_opts, func_inst);
+	if (opts->bound)
+		gether_cleanup(netdev_priv(opts->net));
+	else
+		free_netdev(opts->net);
+	kfree(opts->ncm_interf_group);
+	kfree(opts);
+}
+
+static struct usb_function_instance *ncm_alloc_inst(void)
+{
+	struct f_ncm_opts *opts;
+	struct usb_os_desc *descs[1];
+	char *names[1];
+	struct config_group *ncm_interf_group;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+	opts->ncm_os_desc.ext_compat_id = opts->ncm_ext_compat_id;
+
+	mutex_init(&opts->lock);
+	opts->func_inst.free_func_inst = ncm_free_inst;
+	opts->net = gether_setup_default();
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
+	INIT_LIST_HEAD(&opts->ncm_os_desc.ext_prop);
+
+	descs[0] = &opts->ncm_os_desc;
+	names[0] = "ncm";
+
+	config_group_init_type_name(&opts->func_inst.group, "", &ncm_func_type);
+	ncm_interf_group =
+		usb_os_desc_prepare_interf_dir(&opts->func_inst.group, 1, descs,
+					       names, THIS_MODULE);
+	if (IS_ERR(ncm_interf_group)) {
+		ncm_free_inst(&opts->func_inst);
+		return ERR_CAST(ncm_interf_group);
+	}
+	opts->ncm_interf_group = ncm_interf_group;
+
+	return &opts->func_inst;
+}
+
+static void ncm_free(struct usb_function *f)
+{
+	struct f_ncm *ncm;
+	struct f_ncm_opts *opts;
+
+	ncm = func_to_ncm(f);
+	opts = container_of(f->fi, struct f_ncm_opts, func_inst);
+	kfree(ncm);
+	mutex_lock(&opts->lock);
+	opts->refcnt--;
+	mutex_unlock(&opts->lock);
+}
+
+static void ncm_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_ncm *ncm = func_to_ncm(f);
+
+	DBG(c->cdev, "ncm unbind\n");
+
+	hrtimer_cancel(&ncm->task_timer);
+
+	kfree(f->os_desc_table);
+	f->os_desc_n = 0;
+
+	ncm_string_defs[0].id = 0;
+	usb_free_all_descriptors(f);
+
+	if (atomic_read(&ncm->notify_count)) {
+		usb_ep_dequeue(ncm->notify, ncm->notify_req);
+		atomic_set(&ncm->notify_count, 0);
+	}
+
+	kfree(ncm->notify_req->buf);
+	usb_ep_free_request(ncm->notify, ncm->notify_req);
+}
+
+static struct usb_function *ncm_alloc(struct usb_function_instance *fi)
+{
+	struct f_ncm		*ncm;
+	struct f_ncm_opts	*opts;
+	int status;
+
+	/* allocate and initialize one new instance */
+	ncm = kzalloc(sizeof(*ncm), GFP_KERNEL);
+	if (!ncm)
+		return ERR_PTR(-ENOMEM);
+
+	opts = container_of(fi, struct f_ncm_opts, func_inst);
+	mutex_lock(&opts->lock);
+	opts->refcnt++;
+
+	/* export host's Ethernet address in CDC format */
+	status = gether_get_host_addr_cdc(opts->net, ncm->ethaddr,
+				      sizeof(ncm->ethaddr));
+	if (status < 12) { /* strlen("01234567890a") */
+		kfree(ncm);
+		mutex_unlock(&opts->lock);
+		return ERR_PTR(-EINVAL);
+	}
+	ncm_string_defs[STRING_MAC_IDX].s = ncm->ethaddr;
+
+	spin_lock_init(&ncm->lock);
+	ncm_reset_values(ncm);
+	ncm->port.ioport = netdev_priv(opts->net);
+	mutex_unlock(&opts->lock);
+	ncm->port.is_fixed = true;
+	ncm->port.supports_multi_frame = true;
+
+	ncm->port.func.name = "cdc_network";
+	/* descriptors are per-instance copies */
+	ncm->port.func.bind = ncm_bind;
+	ncm->port.func.unbind = ncm_unbind;
+	ncm->port.func.set_alt = ncm_set_alt;
+	ncm->port.func.get_alt = ncm_get_alt;
+	ncm->port.func.setup = ncm_setup;
+	ncm->port.func.disable = ncm_disable;
+	ncm->port.func.free_func = ncm_free;
+
+	ncm->port.wrap = ncm_wrap_ntb;
+	ncm->port.unwrap = ncm_unwrap_ntb;
+
+	return &ncm->port.func;
+}
+
+DECLARE_USB_FUNCTION_INIT(ncm, ncm_alloc_inst, ncm_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yauheni Kaliuta");
diff --git a/drivers/usb/gadget/function/f_obex.c b/drivers/usb/gadget/function/f_obex.c
new file mode 100644
index 000000000..ab26d84ed
--- /dev/null
+++ b/drivers/usb/gadget/function/f_obex.c
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_obex.c -- USB CDC OBEX function driver
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * Based on f_acm.c by Al Borchers and David Brownell.
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+
+#include "u_serial.h"
+
+
+/*
+ * This CDC OBEX function support just packages a TTY-ish byte stream.
+ * A user mode server will put it into "raw" mode and handle all the
+ * relevant protocol details ... this is just a kernel passthrough.
+ * When possible, we prevent gadget enumeration until that server is
+ * ready to handle the commands.
+ */
+
+struct f_obex {
+	struct gserial			port;
+	u8				ctrl_id;
+	u8				data_id;
+	u8				cur_alt;
+	u8				port_num;
+};
+
+static inline struct f_obex *func_to_obex(struct usb_function *f)
+{
+	return container_of(f, struct f_obex, port.func);
+}
+
+static inline struct f_obex *port_to_obex(struct gserial *p)
+{
+	return container_of(p, struct f_obex, port);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define OBEX_CTRL_IDX	0
+#define OBEX_DATA_IDX	1
+
+static struct usb_string obex_string_defs[] = {
+	[OBEX_CTRL_IDX].s	= "CDC Object Exchange (OBEX)",
+	[OBEX_DATA_IDX].s	= "CDC OBEX Data",
+	{  },	/* end of list */
+};
+
+static struct usb_gadget_strings obex_string_table = {
+	.language		= 0x0409,	/* en-US */
+	.strings		= obex_string_defs,
+};
+
+static struct usb_gadget_strings *obex_strings[] = {
+	&obex_string_table,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_interface_descriptor obex_control_intf = {
+	.bLength		= sizeof(obex_control_intf),
+	.bDescriptorType	= USB_DT_INTERFACE,
+	.bInterfaceNumber	= 0,
+
+	.bAlternateSetting	= 0,
+	.bNumEndpoints		= 0,
+	.bInterfaceClass	= USB_CLASS_COMM,
+	.bInterfaceSubClass	= USB_CDC_SUBCLASS_OBEX,
+};
+
+static struct usb_interface_descriptor obex_data_nop_intf = {
+	.bLength		= sizeof(obex_data_nop_intf),
+	.bDescriptorType	= USB_DT_INTERFACE,
+	.bInterfaceNumber	= 1,
+
+	.bAlternateSetting	= 0,
+	.bNumEndpoints		= 0,
+	.bInterfaceClass	= USB_CLASS_CDC_DATA,
+};
+
+static struct usb_interface_descriptor obex_data_intf = {
+	.bLength		= sizeof(obex_data_intf),
+	.bDescriptorType	= USB_DT_INTERFACE,
+	.bInterfaceNumber	= 2,
+
+	.bAlternateSetting	= 1,
+	.bNumEndpoints		= 2,
+	.bInterfaceClass	= USB_CLASS_CDC_DATA,
+};
+
+static struct usb_cdc_header_desc obex_cdc_header_desc = {
+	.bLength		= sizeof(obex_cdc_header_desc),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= USB_CDC_HEADER_TYPE,
+	.bcdCDC			= cpu_to_le16(0x0120),
+};
+
+static struct usb_cdc_union_desc obex_cdc_union_desc = {
+	.bLength		= sizeof(obex_cdc_union_desc),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= USB_CDC_UNION_TYPE,
+	.bMasterInterface0	= 1,
+	.bSlaveInterface0	= 2,
+};
+
+static struct usb_cdc_obex_desc obex_desc = {
+	.bLength		= sizeof(obex_desc),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= USB_CDC_OBEX_TYPE,
+	.bcdVersion		= cpu_to_le16(0x0100),
+};
+
+/* High-Speed Support */
+
+static struct usb_endpoint_descriptor obex_hs_ep_out_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+
+	.bEndpointAddress	= USB_DIR_OUT,
+	.bmAttributes		= USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize		= cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor obex_hs_ep_in_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize		= cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *hs_function[] = {
+	(struct usb_descriptor_header *) &obex_control_intf,
+	(struct usb_descriptor_header *) &obex_cdc_header_desc,
+	(struct usb_descriptor_header *) &obex_desc,
+	(struct usb_descriptor_header *) &obex_cdc_union_desc,
+
+	(struct usb_descriptor_header *) &obex_data_nop_intf,
+	(struct usb_descriptor_header *) &obex_data_intf,
+	(struct usb_descriptor_header *) &obex_hs_ep_in_desc,
+	(struct usb_descriptor_header *) &obex_hs_ep_out_desc,
+	NULL,
+};
+
+/* Full-Speed Support */
+
+static struct usb_endpoint_descriptor obex_fs_ep_in_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor obex_fs_ep_out_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+
+	.bEndpointAddress	= USB_DIR_OUT,
+	.bmAttributes		= USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *fs_function[] = {
+	(struct usb_descriptor_header *) &obex_control_intf,
+	(struct usb_descriptor_header *) &obex_cdc_header_desc,
+	(struct usb_descriptor_header *) &obex_desc,
+	(struct usb_descriptor_header *) &obex_cdc_union_desc,
+
+	(struct usb_descriptor_header *) &obex_data_nop_intf,
+	(struct usb_descriptor_header *) &obex_data_intf,
+	(struct usb_descriptor_header *) &obex_fs_ep_in_desc,
+	(struct usb_descriptor_header *) &obex_fs_ep_out_desc,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int obex_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_obex		*obex = func_to_obex(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	if (intf == obex->ctrl_id) {
+		if (alt != 0)
+			goto fail;
+		/* NOP */
+		dev_dbg(&cdev->gadget->dev,
+			"reset obex ttyGS%d control\n", obex->port_num);
+
+	} else if (intf == obex->data_id) {
+		if (alt > 1)
+			goto fail;
+
+		if (obex->port.in->enabled) {
+			dev_dbg(&cdev->gadget->dev,
+				"reset obex ttyGS%d\n", obex->port_num);
+			gserial_disconnect(&obex->port);
+		}
+
+		if (!obex->port.in->desc || !obex->port.out->desc) {
+			dev_dbg(&cdev->gadget->dev,
+				"init obex ttyGS%d\n", obex->port_num);
+			if (config_ep_by_speed(cdev->gadget, f,
+					       obex->port.in) ||
+			    config_ep_by_speed(cdev->gadget, f,
+					       obex->port.out)) {
+				obex->port.out->desc = NULL;
+				obex->port.in->desc = NULL;
+				goto fail;
+			}
+		}
+
+		if (alt == 1) {
+			dev_dbg(&cdev->gadget->dev,
+				"activate obex ttyGS%d\n", obex->port_num);
+			gserial_connect(&obex->port, obex->port_num);
+		}
+
+	} else
+		goto fail;
+
+	obex->cur_alt = alt;
+
+	return 0;
+
+fail:
+	return -EINVAL;
+}
+
+static int obex_get_alt(struct usb_function *f, unsigned intf)
+{
+	struct f_obex		*obex = func_to_obex(f);
+
+	return obex->cur_alt;
+}
+
+static void obex_disable(struct usb_function *f)
+{
+	struct f_obex	*obex = func_to_obex(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	dev_dbg(&cdev->gadget->dev, "obex ttyGS%d disable\n", obex->port_num);
+	gserial_disconnect(&obex->port);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void obex_connect(struct gserial *g)
+{
+	struct f_obex		*obex = port_to_obex(g);
+	struct usb_composite_dev *cdev = g->func.config->cdev;
+	int			status;
+
+	status = usb_function_activate(&g->func);
+	if (status)
+		dev_dbg(&cdev->gadget->dev,
+			"obex ttyGS%d function activate --> %d\n",
+			obex->port_num, status);
+}
+
+static void obex_disconnect(struct gserial *g)
+{
+	struct f_obex		*obex = port_to_obex(g);
+	struct usb_composite_dev *cdev = g->func.config->cdev;
+	int			status;
+
+	status = usb_function_deactivate(&g->func);
+	if (status)
+		dev_dbg(&cdev->gadget->dev,
+			"obex ttyGS%d function deactivate --> %d\n",
+			obex->port_num, status);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Some controllers can't support CDC OBEX ... */
+static inline bool can_support_obex(struct usb_configuration *c)
+{
+	/* Since the first interface is a NOP, we can ignore the
+	 * issue of multi-interface support on most controllers.
+	 *
+	 * Altsettings are mandatory, however...
+	 */
+	if (!gadget_is_altset_supported(c->cdev->gadget))
+		return false;
+
+	/* everything else is *probably* fine ... */
+	return true;
+}
+
+static int obex_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_obex		*obex = func_to_obex(f);
+	struct usb_string	*us;
+	int			status;
+	struct usb_ep		*ep;
+
+	if (!can_support_obex(c))
+		return -EINVAL;
+
+	us = usb_gstrings_attach(cdev, obex_strings,
+				 ARRAY_SIZE(obex_string_defs));
+	if (IS_ERR(us))
+		return PTR_ERR(us);
+	obex_control_intf.iInterface = us[OBEX_CTRL_IDX].id;
+	obex_data_nop_intf.iInterface = us[OBEX_DATA_IDX].id;
+	obex_data_intf.iInterface = us[OBEX_DATA_IDX].id;
+
+	/* allocate instance-specific interface IDs, and patch descriptors */
+
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	obex->ctrl_id = status;
+
+	obex_control_intf.bInterfaceNumber = status;
+	obex_cdc_union_desc.bMasterInterface0 = status;
+
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	obex->data_id = status;
+
+	obex_data_nop_intf.bInterfaceNumber = status;
+	obex_data_intf.bInterfaceNumber = status;
+	obex_cdc_union_desc.bSlaveInterface0 = status;
+
+	/* allocate instance-specific endpoints */
+
+	status = -ENODEV;
+	ep = usb_ep_autoconfig(cdev->gadget, &obex_fs_ep_in_desc);
+	if (!ep)
+		goto fail;
+	obex->port.in = ep;
+
+	ep = usb_ep_autoconfig(cdev->gadget, &obex_fs_ep_out_desc);
+	if (!ep)
+		goto fail;
+	obex->port.out = ep;
+
+	/* support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+
+	obex_hs_ep_in_desc.bEndpointAddress =
+		obex_fs_ep_in_desc.bEndpointAddress;
+	obex_hs_ep_out_desc.bEndpointAddress =
+		obex_fs_ep_out_desc.bEndpointAddress;
+
+	status = usb_assign_descriptors(f, fs_function, hs_function, NULL,
+					NULL);
+	if (status)
+		goto fail;
+
+	dev_dbg(&cdev->gadget->dev, "obex ttyGS%d: %s speed IN/%s OUT/%s\n",
+		obex->port_num,
+		gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+		obex->port.in->name, obex->port.out->name);
+
+	return 0;
+
+fail:
+	ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status);
+
+	return status;
+}
+
+static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_serial_opts,
+			    func_inst.group);
+}
+
+static void obex_attr_release(struct config_item *item)
+{
+	struct f_serial_opts *opts = to_f_serial_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations obex_item_ops = {
+	.release	= obex_attr_release,
+};
+
+static ssize_t f_obex_port_num_show(struct config_item *item, char *page)
+{
+	return sprintf(page, "%u\n", to_f_serial_opts(item)->port_num);
+}
+
+CONFIGFS_ATTR_RO(f_obex_, port_num);
+
+static struct configfs_attribute *acm_attrs[] = {
+	&f_obex_attr_port_num,
+	NULL,
+};
+
+static const struct config_item_type obex_func_type = {
+	.ct_item_ops	= &obex_item_ops,
+	.ct_attrs	= acm_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void obex_free_inst(struct usb_function_instance *f)
+{
+	struct f_serial_opts *opts;
+
+	opts = container_of(f, struct f_serial_opts, func_inst);
+	gserial_free_line(opts->port_num);
+	kfree(opts);
+}
+
+static struct usb_function_instance *obex_alloc_inst(void)
+{
+	struct f_serial_opts *opts;
+	int ret;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+
+	opts->func_inst.free_func_inst = obex_free_inst;
+	ret = gserial_alloc_line_no_console(&opts->port_num);
+	if (ret) {
+		kfree(opts);
+		return ERR_PTR(ret);
+	}
+	config_group_init_type_name(&opts->func_inst.group, "",
+				    &obex_func_type);
+
+	return &opts->func_inst;
+}
+
+static void obex_free(struct usb_function *f)
+{
+	struct f_obex *obex;
+
+	obex = func_to_obex(f);
+	kfree(obex);
+}
+
+static void obex_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	usb_free_all_descriptors(f);
+}
+
+static struct usb_function *obex_alloc(struct usb_function_instance *fi)
+{
+	struct f_obex	*obex;
+	struct f_serial_opts *opts;
+
+	/* allocate and initialize one new instance */
+	obex = kzalloc(sizeof(*obex), GFP_KERNEL);
+	if (!obex)
+		return ERR_PTR(-ENOMEM);
+
+	opts = container_of(fi, struct f_serial_opts, func_inst);
+
+	obex->port_num = opts->port_num;
+
+	obex->port.connect = obex_connect;
+	obex->port.disconnect = obex_disconnect;
+
+	obex->port.func.name = "obex";
+	/* descriptors are per-instance copies */
+	obex->port.func.bind = obex_bind;
+	obex->port.func.unbind = obex_unbind;
+	obex->port.func.set_alt = obex_set_alt;
+	obex->port.func.get_alt = obex_get_alt;
+	obex->port.func.disable = obex_disable;
+	obex->port.func.free_func = obex_free;
+	obex->port.func.bind_deactivated = true;
+
+	return &obex->port.func;
+}
+
+DECLARE_USB_FUNCTION_INIT(obex, obex_alloc_inst, obex_alloc);
+MODULE_AUTHOR("Felipe Balbi");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/function/f_phonet.c b/drivers/usb/gadget/function/f_phonet.c
new file mode 100644
index 000000000..0bebbdf3f
--- /dev/null
+++ b/drivers/usb/gadget/function/f_phonet.c
@@ -0,0 +1,732 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * f_phonet.c -- USB CDC Phonet function
+ *
+ * Copyright (C) 2007-2008 Nokia Corporation. All rights reserved.
+ *
+ * Author: Rémi Denis-Courmont
+ */
+
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+
+#include <linux/netdevice.h>
+#include <linux/if_ether.h>
+#include <linux/if_phonet.h>
+#include <linux/if_arp.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/composite.h>
+
+#include "u_phonet.h"
+#include "u_ether.h"
+
+#define PN_MEDIA_USB	0x1B
+#define MAXPACKET	512
+#if (PAGE_SIZE % MAXPACKET)
+#error MAXPACKET must divide PAGE_SIZE!
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+struct phonet_port {
+	struct f_phonet			*usb;
+	spinlock_t			lock;
+};
+
+struct f_phonet {
+	struct usb_function		function;
+	struct {
+		struct sk_buff		*skb;
+		spinlock_t		lock;
+	} rx;
+	struct net_device		*dev;
+	struct usb_ep			*in_ep, *out_ep;
+
+	struct usb_request		*in_req;
+	struct usb_request		*out_reqv[];
+};
+
+static int phonet_rxq_size = 17;
+
+static inline struct f_phonet *func_to_pn(struct usb_function *f)
+{
+	return container_of(f, struct f_phonet, function);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define USB_CDC_SUBCLASS_PHONET	0xfe
+#define USB_CDC_PHONET_TYPE	0xab
+
+static struct usb_interface_descriptor
+pn_control_intf_desc = {
+	.bLength =		sizeof pn_control_intf_desc,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	/* .bInterfaceNumber =	DYNAMIC, */
+	.bInterfaceClass =	USB_CLASS_COMM,
+	.bInterfaceSubClass =	USB_CDC_SUBCLASS_PHONET,
+};
+
+static const struct usb_cdc_header_desc
+pn_header_desc = {
+	.bLength =		sizeof pn_header_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
+	.bcdCDC =		cpu_to_le16(0x0110),
+};
+
+static const struct usb_cdc_header_desc
+pn_phonet_desc = {
+	.bLength =		sizeof pn_phonet_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_PHONET_TYPE,
+	.bcdCDC =		cpu_to_le16(0x1505), /* ??? */
+};
+
+static struct usb_cdc_union_desc
+pn_union_desc = {
+	.bLength =		sizeof pn_union_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_UNION_TYPE,
+
+	/* .bMasterInterface0 =	DYNAMIC, */
+	/* .bSlaveInterface0 =	DYNAMIC, */
+};
+
+static struct usb_interface_descriptor
+pn_data_nop_intf_desc = {
+	.bLength =		sizeof pn_data_nop_intf_desc,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	/* .bInterfaceNumber =	DYNAMIC, */
+	.bAlternateSetting =	0,
+	.bNumEndpoints =	0,
+	.bInterfaceClass =	USB_CLASS_CDC_DATA,
+};
+
+static struct usb_interface_descriptor
+pn_data_intf_desc = {
+	.bLength =		sizeof pn_data_intf_desc,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	/* .bInterfaceNumber =	DYNAMIC, */
+	.bAlternateSetting =	1,
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_CDC_DATA,
+};
+
+static struct usb_endpoint_descriptor
+pn_fs_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor
+pn_hs_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(MAXPACKET),
+};
+
+static struct usb_endpoint_descriptor
+pn_fs_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor
+pn_hs_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *fs_pn_function[] = {
+	(struct usb_descriptor_header *) &pn_control_intf_desc,
+	(struct usb_descriptor_header *) &pn_header_desc,
+	(struct usb_descriptor_header *) &pn_phonet_desc,
+	(struct usb_descriptor_header *) &pn_union_desc,
+	(struct usb_descriptor_header *) &pn_data_nop_intf_desc,
+	(struct usb_descriptor_header *) &pn_data_intf_desc,
+	(struct usb_descriptor_header *) &pn_fs_sink_desc,
+	(struct usb_descriptor_header *) &pn_fs_source_desc,
+	NULL,
+};
+
+static struct usb_descriptor_header *hs_pn_function[] = {
+	(struct usb_descriptor_header *) &pn_control_intf_desc,
+	(struct usb_descriptor_header *) &pn_header_desc,
+	(struct usb_descriptor_header *) &pn_phonet_desc,
+	(struct usb_descriptor_header *) &pn_union_desc,
+	(struct usb_descriptor_header *) &pn_data_nop_intf_desc,
+	(struct usb_descriptor_header *) &pn_data_intf_desc,
+	(struct usb_descriptor_header *) &pn_hs_sink_desc,
+	(struct usb_descriptor_header *) &pn_hs_source_desc,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int pn_net_open(struct net_device *dev)
+{
+	netif_wake_queue(dev);
+	return 0;
+}
+
+static int pn_net_close(struct net_device *dev)
+{
+	netif_stop_queue(dev);
+	return 0;
+}
+
+static void pn_tx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_phonet *fp = ep->driver_data;
+	struct net_device *dev = fp->dev;
+	struct sk_buff *skb = req->context;
+
+	switch (req->status) {
+	case 0:
+		dev->stats.tx_packets++;
+		dev->stats.tx_bytes += skb->len;
+		break;
+
+	case -ESHUTDOWN: /* disconnected */
+	case -ECONNRESET: /* disabled */
+		dev->stats.tx_aborted_errors++;
+		fallthrough;
+	default:
+		dev->stats.tx_errors++;
+	}
+
+	dev_kfree_skb_any(skb);
+	netif_wake_queue(dev);
+}
+
+static netdev_tx_t pn_net_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct phonet_port *port = netdev_priv(dev);
+	struct f_phonet *fp;
+	struct usb_request *req;
+	unsigned long flags;
+
+	if (skb->protocol != htons(ETH_P_PHONET))
+		goto out;
+
+	spin_lock_irqsave(&port->lock, flags);
+	fp = port->usb;
+	if (unlikely(!fp)) /* race with carrier loss */
+		goto out_unlock;
+
+	req = fp->in_req;
+	req->buf = skb->data;
+	req->length = skb->len;
+	req->complete = pn_tx_complete;
+	req->zero = 1;
+	req->context = skb;
+
+	if (unlikely(usb_ep_queue(fp->in_ep, req, GFP_ATOMIC)))
+		goto out_unlock;
+
+	netif_stop_queue(dev);
+	skb = NULL;
+
+out_unlock:
+	spin_unlock_irqrestore(&port->lock, flags);
+out:
+	if (unlikely(skb)) {
+		dev_kfree_skb(skb);
+		dev->stats.tx_dropped++;
+	}
+	return NETDEV_TX_OK;
+}
+
+static const struct net_device_ops pn_netdev_ops = {
+	.ndo_open	= pn_net_open,
+	.ndo_stop	= pn_net_close,
+	.ndo_start_xmit	= pn_net_xmit,
+};
+
+static void pn_net_setup(struct net_device *dev)
+{
+	const u8 addr = PN_MEDIA_USB;
+
+	dev->features		= 0;
+	dev->type		= ARPHRD_PHONET;
+	dev->flags		= IFF_POINTOPOINT | IFF_NOARP;
+	dev->mtu		= PHONET_DEV_MTU;
+	dev->min_mtu		= PHONET_MIN_MTU;
+	dev->max_mtu		= PHONET_MAX_MTU;
+	dev->hard_header_len	= 1;
+	dev->addr_len		= 1;
+	dev_addr_set(dev, &addr);
+
+	dev->tx_queue_len	= 1;
+
+	dev->netdev_ops		= &pn_netdev_ops;
+	dev->needs_free_netdev	= true;
+	dev->header_ops		= &phonet_header_ops;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Queue buffer for data from the host
+ */
+static int
+pn_rx_submit(struct f_phonet *fp, struct usb_request *req, gfp_t gfp_flags)
+{
+	struct page *page;
+	int err;
+
+	page = __dev_alloc_page(gfp_flags | __GFP_NOMEMALLOC);
+	if (!page)
+		return -ENOMEM;
+
+	req->buf = page_address(page);
+	req->length = PAGE_SIZE;
+	req->context = page;
+
+	err = usb_ep_queue(fp->out_ep, req, gfp_flags);
+	if (unlikely(err))
+		put_page(page);
+	return err;
+}
+
+static void pn_rx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_phonet *fp = ep->driver_data;
+	struct net_device *dev = fp->dev;
+	struct page *page = req->context;
+	struct sk_buff *skb;
+	unsigned long flags;
+	int status = req->status;
+
+	switch (status) {
+	case 0:
+		spin_lock_irqsave(&fp->rx.lock, flags);
+		skb = fp->rx.skb;
+		if (!skb)
+			skb = fp->rx.skb = netdev_alloc_skb(dev, 12);
+		if (req->actual < req->length) /* Last fragment */
+			fp->rx.skb = NULL;
+		spin_unlock_irqrestore(&fp->rx.lock, flags);
+
+		if (unlikely(!skb))
+			break;
+
+		if (skb->len == 0) { /* First fragment */
+			skb->protocol = htons(ETH_P_PHONET);
+			skb_reset_mac_header(skb);
+			/* Can't use pskb_pull() on page in IRQ */
+			skb_put_data(skb, page_address(page), 1);
+		}
+
+		skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
+				skb->len <= 1, req->actual, PAGE_SIZE);
+		page = NULL;
+
+		if (req->actual < req->length) { /* Last fragment */
+			skb->dev = dev;
+			dev->stats.rx_packets++;
+			dev->stats.rx_bytes += skb->len;
+
+			netif_rx(skb);
+		}
+		break;
+
+	/* Do not resubmit in these cases: */
+	case -ESHUTDOWN: /* disconnect */
+	case -ECONNABORTED: /* hw reset */
+	case -ECONNRESET: /* dequeued (unlink or netif down) */
+		req = NULL;
+		break;
+
+	/* Do resubmit in these cases: */
+	case -EOVERFLOW: /* request buffer overflow */
+		dev->stats.rx_over_errors++;
+		fallthrough;
+	default:
+		dev->stats.rx_errors++;
+		break;
+	}
+
+	if (page)
+		put_page(page);
+	if (req)
+		pn_rx_submit(fp, req, GFP_ATOMIC);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void __pn_reset(struct usb_function *f)
+{
+	struct f_phonet *fp = func_to_pn(f);
+	struct net_device *dev = fp->dev;
+	struct phonet_port *port = netdev_priv(dev);
+
+	netif_carrier_off(dev);
+	port->usb = NULL;
+
+	usb_ep_disable(fp->out_ep);
+	usb_ep_disable(fp->in_ep);
+	if (fp->rx.skb) {
+		dev_kfree_skb_irq(fp->rx.skb);
+		fp->rx.skb = NULL;
+	}
+}
+
+static int pn_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_phonet *fp = func_to_pn(f);
+	struct usb_gadget *gadget = fp->function.config->cdev->gadget;
+
+	if (intf == pn_control_intf_desc.bInterfaceNumber)
+		/* control interface, no altsetting */
+		return (alt > 0) ? -EINVAL : 0;
+
+	if (intf == pn_data_intf_desc.bInterfaceNumber) {
+		struct net_device *dev = fp->dev;
+		struct phonet_port *port = netdev_priv(dev);
+
+		/* data intf (0: inactive, 1: active) */
+		if (alt > 1)
+			return -EINVAL;
+
+		spin_lock(&port->lock);
+
+		if (fp->in_ep->enabled)
+			__pn_reset(f);
+
+		if (alt == 1) {
+			int i;
+
+			if (config_ep_by_speed(gadget, f, fp->in_ep) ||
+			    config_ep_by_speed(gadget, f, fp->out_ep)) {
+				fp->in_ep->desc = NULL;
+				fp->out_ep->desc = NULL;
+				spin_unlock(&port->lock);
+				return -EINVAL;
+			}
+			usb_ep_enable(fp->out_ep);
+			usb_ep_enable(fp->in_ep);
+
+			port->usb = fp;
+			fp->out_ep->driver_data = fp;
+			fp->in_ep->driver_data = fp;
+
+			netif_carrier_on(dev);
+			for (i = 0; i < phonet_rxq_size; i++)
+				pn_rx_submit(fp, fp->out_reqv[i], GFP_ATOMIC);
+		}
+		spin_unlock(&port->lock);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int pn_get_alt(struct usb_function *f, unsigned intf)
+{
+	struct f_phonet *fp = func_to_pn(f);
+
+	if (intf == pn_control_intf_desc.bInterfaceNumber)
+		return 0;
+
+	if (intf == pn_data_intf_desc.bInterfaceNumber) {
+		struct phonet_port *port = netdev_priv(fp->dev);
+		u8 alt;
+
+		spin_lock(&port->lock);
+		alt = port->usb != NULL;
+		spin_unlock(&port->lock);
+		return alt;
+	}
+
+	return -EINVAL;
+}
+
+static void pn_disconnect(struct usb_function *f)
+{
+	struct f_phonet *fp = func_to_pn(f);
+	struct phonet_port *port = netdev_priv(fp->dev);
+	unsigned long flags;
+
+	/* remain disabled until set_alt */
+	spin_lock_irqsave(&port->lock, flags);
+	__pn_reset(f);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int pn_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct usb_gadget *gadget = cdev->gadget;
+	struct f_phonet *fp = func_to_pn(f);
+	struct usb_ep *ep;
+	int status, i;
+
+	struct f_phonet_opts *phonet_opts;
+
+	phonet_opts = container_of(f->fi, struct f_phonet_opts, func_inst);
+
+	/*
+	 * in drivers/usb/gadget/configfs.c:configfs_composite_bind()
+	 * configurations are bound in sequence with list_for_each_entry,
+	 * in each configuration its functions are bound in sequence
+	 * with list_for_each_entry, so we assume no race condition
+	 * with regard to phonet_opts->bound access
+	 */
+	if (!phonet_opts->bound) {
+		gphonet_set_gadget(phonet_opts->net, gadget);
+		status = gphonet_register_netdev(phonet_opts->net);
+		if (status)
+			return status;
+		phonet_opts->bound = true;
+	}
+
+	/* Reserve interface IDs */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto err;
+	pn_control_intf_desc.bInterfaceNumber = status;
+	pn_union_desc.bMasterInterface0 = status;
+
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto err;
+	pn_data_nop_intf_desc.bInterfaceNumber = status;
+	pn_data_intf_desc.bInterfaceNumber = status;
+	pn_union_desc.bSlaveInterface0 = status;
+
+	/* Reserve endpoints */
+	status = -ENODEV;
+	ep = usb_ep_autoconfig(gadget, &pn_fs_sink_desc);
+	if (!ep)
+		goto err;
+	fp->out_ep = ep;
+
+	ep = usb_ep_autoconfig(gadget, &pn_fs_source_desc);
+	if (!ep)
+		goto err;
+	fp->in_ep = ep;
+
+	pn_hs_sink_desc.bEndpointAddress = pn_fs_sink_desc.bEndpointAddress;
+	pn_hs_source_desc.bEndpointAddress = pn_fs_source_desc.bEndpointAddress;
+
+	/* Do not try to bind Phonet twice... */
+	status = usb_assign_descriptors(f, fs_pn_function, hs_pn_function,
+			NULL, NULL);
+	if (status)
+		goto err;
+
+	/* Incoming USB requests */
+	status = -ENOMEM;
+	for (i = 0; i < phonet_rxq_size; i++) {
+		struct usb_request *req;
+
+		req = usb_ep_alloc_request(fp->out_ep, GFP_KERNEL);
+		if (!req)
+			goto err_req;
+
+		req->complete = pn_rx_complete;
+		fp->out_reqv[i] = req;
+	}
+
+	/* Outgoing USB requests */
+	fp->in_req = usb_ep_alloc_request(fp->in_ep, GFP_KERNEL);
+	if (!fp->in_req)
+		goto err_req;
+
+	INFO(cdev, "USB CDC Phonet function\n");
+	INFO(cdev, "using %s, OUT %s, IN %s\n", cdev->gadget->name,
+		fp->out_ep->name, fp->in_ep->name);
+	return 0;
+
+err_req:
+	for (i = 0; i < phonet_rxq_size && fp->out_reqv[i]; i++)
+		usb_ep_free_request(fp->out_ep, fp->out_reqv[i]);
+	usb_free_all_descriptors(f);
+err:
+	ERROR(cdev, "USB CDC Phonet: cannot autoconfigure\n");
+	return status;
+}
+
+static inline struct f_phonet_opts *to_f_phonet_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_phonet_opts,
+			func_inst.group);
+}
+
+static void phonet_attr_release(struct config_item *item)
+{
+	struct f_phonet_opts *opts = to_f_phonet_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations phonet_item_ops = {
+	.release		= phonet_attr_release,
+};
+
+static ssize_t f_phonet_ifname_show(struct config_item *item, char *page)
+{
+	return gether_get_ifname(to_f_phonet_opts(item)->net, page, PAGE_SIZE);
+}
+
+CONFIGFS_ATTR_RO(f_phonet_, ifname);
+
+static struct configfs_attribute *phonet_attrs[] = {
+	&f_phonet_attr_ifname,
+	NULL,
+};
+
+static const struct config_item_type phonet_func_type = {
+	.ct_item_ops	= &phonet_item_ops,
+	.ct_attrs	= phonet_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void phonet_free_inst(struct usb_function_instance *f)
+{
+	struct f_phonet_opts *opts;
+
+	opts = container_of(f, struct f_phonet_opts, func_inst);
+	if (opts->bound)
+		gphonet_cleanup(opts->net);
+	else
+		free_netdev(opts->net);
+	kfree(opts);
+}
+
+static struct usb_function_instance *phonet_alloc_inst(void)
+{
+	struct f_phonet_opts *opts;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+
+	opts->func_inst.free_func_inst = phonet_free_inst;
+	opts->net = gphonet_setup_default();
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
+
+	config_group_init_type_name(&opts->func_inst.group, "",
+			&phonet_func_type);
+
+	return &opts->func_inst;
+}
+
+static void phonet_free(struct usb_function *f)
+{
+	struct f_phonet *phonet;
+
+	phonet = func_to_pn(f);
+	kfree(phonet);
+}
+
+static void pn_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_phonet *fp = func_to_pn(f);
+	int i;
+
+	/* We are already disconnected */
+	if (fp->in_req)
+		usb_ep_free_request(fp->in_ep, fp->in_req);
+	for (i = 0; i < phonet_rxq_size; i++)
+		if (fp->out_reqv[i])
+			usb_ep_free_request(fp->out_ep, fp->out_reqv[i]);
+
+	usb_free_all_descriptors(f);
+}
+
+static struct usb_function *phonet_alloc(struct usb_function_instance *fi)
+{
+	struct f_phonet *fp;
+	struct f_phonet_opts *opts;
+
+	fp = kzalloc(struct_size(fp, out_reqv, phonet_rxq_size), GFP_KERNEL);
+	if (!fp)
+		return ERR_PTR(-ENOMEM);
+
+	opts = container_of(fi, struct f_phonet_opts, func_inst);
+
+	fp->dev = opts->net;
+	fp->function.name = "phonet";
+	fp->function.bind = pn_bind;
+	fp->function.unbind = pn_unbind;
+	fp->function.set_alt = pn_set_alt;
+	fp->function.get_alt = pn_get_alt;
+	fp->function.disable = pn_disconnect;
+	fp->function.free_func = phonet_free;
+	spin_lock_init(&fp->rx.lock);
+
+	return &fp->function;
+}
+
+struct net_device *gphonet_setup_default(void)
+{
+	struct net_device *dev;
+	struct phonet_port *port;
+
+	/* Create net device */
+	dev = alloc_netdev(sizeof(*port), "upnlink%d", NET_NAME_UNKNOWN,
+			   pn_net_setup);
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	port = netdev_priv(dev);
+	spin_lock_init(&port->lock);
+	netif_carrier_off(dev);
+
+	return dev;
+}
+
+void gphonet_set_gadget(struct net_device *net, struct usb_gadget *g)
+{
+	SET_NETDEV_DEV(net, &g->dev);
+}
+
+int gphonet_register_netdev(struct net_device *net)
+{
+	int status;
+
+	status = register_netdev(net);
+	if (status)
+		free_netdev(net);
+
+	return status;
+}
+
+void gphonet_cleanup(struct net_device *dev)
+{
+	unregister_netdev(dev);
+}
+
+DECLARE_USB_FUNCTION_INIT(phonet, phonet_alloc_inst, phonet_alloc);
+MODULE_AUTHOR("Rémi Denis-Courmont");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
new file mode 100644
index 000000000..a881c69b1
--- /dev/null
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -0,0 +1,1552 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_printer.c - USB printer function driver
+ *
+ * Copied from drivers/usb/gadget/legacy/printer.c,
+ * which was:
+ *
+ * printer.c -- Printer gadget driver
+ *
+ * Copyright (C) 2003-2005 David Brownell
+ * Copyright (C) 2006 Craig W. Nadler
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/idr.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/cdev.h>
+#include <linux/kref.h>
+
+#include <asm/byteorder.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/uaccess.h>
+#include <asm/unaligned.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/g_printer.h>
+
+#include "u_printer.h"
+
+#define PRINTER_MINORS		4
+#define GET_DEVICE_ID		0
+#define GET_PORT_STATUS		1
+#define SOFT_RESET		2
+
+#define DEFAULT_Q_LEN		10 /* same as legacy g_printer gadget */
+
+static int major, minors;
+static struct class *usb_gadget_class;
+static DEFINE_IDA(printer_ida);
+static DEFINE_MUTEX(printer_ida_lock); /* protects access do printer_ida */
+
+/*-------------------------------------------------------------------------*/
+
+struct printer_dev {
+	spinlock_t		lock;		/* lock this structure */
+	/* lock buffer lists during read/write calls */
+	struct mutex		lock_printer_io;
+	struct usb_gadget	*gadget;
+	s8			interface;
+	struct usb_ep		*in_ep, *out_ep;
+	struct kref             kref;
+	struct list_head	rx_reqs;	/* List of free RX structs */
+	struct list_head	rx_reqs_active;	/* List of Active RX xfers */
+	struct list_head	rx_buffers;	/* List of completed xfers */
+	/* wait until there is data to be read. */
+	wait_queue_head_t	rx_wait;
+	struct list_head	tx_reqs;	/* List of free TX structs */
+	struct list_head	tx_reqs_active; /* List of Active TX xfers */
+	/* Wait until there are write buffers available to use. */
+	wait_queue_head_t	tx_wait;
+	/* Wait until all write buffers have been sent. */
+	wait_queue_head_t	tx_flush_wait;
+	struct usb_request	*current_rx_req;
+	size_t			current_rx_bytes;
+	u8			*current_rx_buf;
+	u8			printer_status;
+	u8			reset_printer;
+	int			minor;
+	struct cdev		printer_cdev;
+	u8			printer_cdev_open;
+	wait_queue_head_t	wait;
+	unsigned		q_len;
+	char			**pnp_string;	/* We don't own memory! */
+	struct usb_function	function;
+};
+
+static inline struct printer_dev *func_to_printer(struct usb_function *f)
+{
+	return container_of(f, struct printer_dev, function);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * DESCRIPTORS ... most are static, but strings and (full) configuration
+ * descriptors are built on demand.
+ */
+
+/* holds our biggest descriptor */
+#define USB_DESC_BUFSIZE		256
+#define USB_BUFSIZE			8192
+
+static struct usb_interface_descriptor intf_desc = {
+	.bLength =		sizeof(intf_desc),
+	.bDescriptorType =	USB_DT_INTERFACE,
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_PRINTER,
+	.bInterfaceSubClass =	1,	/* Printer Sub-Class */
+	.bInterfaceProtocol =	2,	/* Bi-Directional */
+	.iInterface =		0
+};
+
+static struct usb_endpoint_descriptor fs_ep_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK
+};
+
+static struct usb_endpoint_descriptor fs_ep_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK
+};
+
+static struct usb_descriptor_header *fs_printer_function[] = {
+	(struct usb_descriptor_header *) &intf_desc,
+	(struct usb_descriptor_header *) &fs_ep_in_desc,
+	(struct usb_descriptor_header *) &fs_ep_out_desc,
+	NULL
+};
+
+/*
+ * usb 2.0 devices need to expose both high speed and full speed
+ * descriptors, unless they only run at full speed.
+ */
+
+static struct usb_endpoint_descriptor hs_ep_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512)
+};
+
+static struct usb_endpoint_descriptor hs_ep_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512)
+};
+
+static struct usb_descriptor_header *hs_printer_function[] = {
+	(struct usb_descriptor_header *) &intf_desc,
+	(struct usb_descriptor_header *) &hs_ep_in_desc,
+	(struct usb_descriptor_header *) &hs_ep_out_desc,
+	NULL
+};
+
+/*
+ * Added endpoint descriptors for 3.0 devices
+ */
+
+static struct usb_endpoint_descriptor ss_ep_in_desc = {
+	.bLength =              USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =      USB_DT_ENDPOINT,
+	.bmAttributes =         USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =       cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ep_in_comp_desc = {
+	.bLength =              sizeof(ss_ep_in_comp_desc),
+	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_endpoint_descriptor ss_ep_out_desc = {
+	.bLength =              USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =      USB_DT_ENDPOINT,
+	.bmAttributes =         USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =       cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ep_out_comp_desc = {
+	.bLength =              sizeof(ss_ep_out_comp_desc),
+	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_descriptor_header *ss_printer_function[] = {
+	(struct usb_descriptor_header *) &intf_desc,
+	(struct usb_descriptor_header *) &ss_ep_in_desc,
+	(struct usb_descriptor_header *) &ss_ep_in_comp_desc,
+	(struct usb_descriptor_header *) &ss_ep_out_desc,
+	(struct usb_descriptor_header *) &ss_ep_out_comp_desc,
+	NULL
+};
+
+/* maxpacket and other transfer characteristics vary by speed. */
+static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
+					struct usb_endpoint_descriptor *fs,
+					struct usb_endpoint_descriptor *hs,
+					struct usb_endpoint_descriptor *ss)
+{
+	switch (gadget->speed) {
+	case USB_SPEED_SUPER:
+		return ss;
+	case USB_SPEED_HIGH:
+		return hs;
+	default:
+		return fs;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void printer_dev_free(struct kref *kref)
+{
+	struct printer_dev *dev = container_of(kref, struct printer_dev, kref);
+
+	kfree(dev);
+}
+
+static struct usb_request *
+printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
+{
+	struct usb_request	*req;
+
+	req = usb_ep_alloc_request(ep, gfp_flags);
+
+	if (req != NULL) {
+		req->length = len;
+		req->buf = kmalloc(len, gfp_flags);
+		if (req->buf == NULL) {
+			usb_ep_free_request(ep, req);
+			return NULL;
+		}
+	}
+
+	return req;
+}
+
+static void
+printer_req_free(struct usb_ep *ep, struct usb_request *req)
+{
+	if (ep != NULL && req != NULL) {
+		kfree(req->buf);
+		usb_ep_free_request(ep, req);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void rx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct printer_dev	*dev = ep->driver_data;
+	int			status = req->status;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	list_del_init(&req->list);	/* Remode from Active List */
+
+	switch (status) {
+
+	/* normal completion */
+	case 0:
+		if (req->actual > 0) {
+			list_add_tail(&req->list, &dev->rx_buffers);
+			DBG(dev, "G_Printer : rx length %d\n", req->actual);
+		} else {
+			list_add(&req->list, &dev->rx_reqs);
+		}
+		break;
+
+	/* software-driven interface shutdown */
+	case -ECONNRESET:		/* unlink */
+	case -ESHUTDOWN:		/* disconnect etc */
+		VDBG(dev, "rx shutdown, code %d\n", status);
+		list_add(&req->list, &dev->rx_reqs);
+		break;
+
+	/* for hardware automagic (such as pxa) */
+	case -ECONNABORTED:		/* endpoint reset */
+		DBG(dev, "rx %s reset\n", ep->name);
+		list_add(&req->list, &dev->rx_reqs);
+		break;
+
+	/* data overrun */
+	case -EOVERFLOW:
+		fallthrough;
+
+	default:
+		DBG(dev, "rx status %d\n", status);
+		list_add(&req->list, &dev->rx_reqs);
+		break;
+	}
+
+	wake_up_interruptible(&dev->rx_wait);
+	spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+static void tx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct printer_dev	*dev = ep->driver_data;
+
+	switch (req->status) {
+	default:
+		VDBG(dev, "tx err %d\n", req->status);
+		fallthrough;
+	case -ECONNRESET:		/* unlink */
+	case -ESHUTDOWN:		/* disconnect etc */
+		break;
+	case 0:
+		break;
+	}
+
+	spin_lock(&dev->lock);
+	/* Take the request struct off the active list and put it on the
+	 * free list.
+	 */
+	list_del_init(&req->list);
+	list_add(&req->list, &dev->tx_reqs);
+	wake_up_interruptible(&dev->tx_wait);
+	if (likely(list_empty(&dev->tx_reqs_active)))
+		wake_up_interruptible(&dev->tx_flush_wait);
+
+	spin_unlock(&dev->lock);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+printer_open(struct inode *inode, struct file *fd)
+{
+	struct printer_dev	*dev;
+	unsigned long		flags;
+	int			ret = -EBUSY;
+
+	dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev);
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	if (dev->interface < 0) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+		return -ENODEV;
+	}
+
+	if (!dev->printer_cdev_open) {
+		dev->printer_cdev_open = 1;
+		fd->private_data = dev;
+		ret = 0;
+		/* Change the printer status to show that it's on-line. */
+		dev->printer_status |= PRINTER_SELECTED;
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	kref_get(&dev->kref);
+	DBG(dev, "printer_open returned %x\n", ret);
+	return ret;
+}
+
+static int
+printer_close(struct inode *inode, struct file *fd)
+{
+	struct printer_dev	*dev = fd->private_data;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	dev->printer_cdev_open = 0;
+	fd->private_data = NULL;
+	/* Change printer status to show that the printer is off-line. */
+	dev->printer_status &= ~PRINTER_SELECTED;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	kref_put(&dev->kref, printer_dev_free);
+	DBG(dev, "printer_close\n");
+
+	return 0;
+}
+
+/* This function must be called with interrupts turned off. */
+static void
+setup_rx_reqs(struct printer_dev *dev)
+{
+	struct usb_request              *req;
+
+	while (likely(!list_empty(&dev->rx_reqs))) {
+		int error;
+
+		req = container_of(dev->rx_reqs.next,
+				struct usb_request, list);
+		list_del_init(&req->list);
+
+		/* The USB Host sends us whatever amount of data it wants to
+		 * so we always set the length field to the full USB_BUFSIZE.
+		 * If the amount of data is more than the read() caller asked
+		 * for it will be stored in the request buffer until it is
+		 * asked for by read().
+		 */
+		req->length = USB_BUFSIZE;
+		req->complete = rx_complete;
+
+		/* here, we unlock, and only unlock, to avoid deadlock. */
+		spin_unlock(&dev->lock);
+		error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
+		spin_lock(&dev->lock);
+		if (error) {
+			DBG(dev, "rx submit --> %d\n", error);
+			list_add(&req->list, &dev->rx_reqs);
+			break;
+		}
+		/* if the req is empty, then add it into dev->rx_reqs_active. */
+		else if (list_empty(&req->list))
+			list_add(&req->list, &dev->rx_reqs_active);
+	}
+}
+
+static ssize_t
+printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
+{
+	struct printer_dev		*dev = fd->private_data;
+	unsigned long			flags;
+	size_t				size;
+	size_t				bytes_copied;
+	struct usb_request		*req;
+	/* This is a pointer to the current USB rx request. */
+	struct usb_request		*current_rx_req;
+	/* This is the number of bytes in the current rx buffer. */
+	size_t				current_rx_bytes;
+	/* This is a pointer to the current rx buffer. */
+	u8				*current_rx_buf;
+
+	if (len == 0)
+		return -EINVAL;
+
+	DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
+
+	mutex_lock(&dev->lock_printer_io);
+	spin_lock_irqsave(&dev->lock, flags);
+
+	if (dev->interface < 0) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+		mutex_unlock(&dev->lock_printer_io);
+		return -ENODEV;
+	}
+
+	/* We will use this flag later to check if a printer reset happened
+	 * after we turn interrupts back on.
+	 */
+	dev->reset_printer = 0;
+
+	setup_rx_reqs(dev);
+
+	bytes_copied = 0;
+	current_rx_req = dev->current_rx_req;
+	current_rx_bytes = dev->current_rx_bytes;
+	current_rx_buf = dev->current_rx_buf;
+	dev->current_rx_req = NULL;
+	dev->current_rx_bytes = 0;
+	dev->current_rx_buf = NULL;
+
+	/* Check if there is any data in the read buffers. Please note that
+	 * current_rx_bytes is the number of bytes in the current rx buffer.
+	 * If it is zero then check if there are any other rx_buffers that
+	 * are on the completed list. We are only out of data if all rx
+	 * buffers are empty.
+	 */
+	if ((current_rx_bytes == 0) &&
+			(likely(list_empty(&dev->rx_buffers)))) {
+		/* Turn interrupts back on before sleeping. */
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		/*
+		 * If no data is available check if this is a NON-Blocking
+		 * call or not.
+		 */
+		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		/* Sleep until data is available */
+		wait_event_interruptible(dev->rx_wait,
+				(likely(!list_empty(&dev->rx_buffers))));
+		spin_lock_irqsave(&dev->lock, flags);
+	}
+
+	/* We have data to return then copy it to the caller's buffer.*/
+	while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers)))
+			&& len) {
+		if (current_rx_bytes == 0) {
+			req = container_of(dev->rx_buffers.next,
+					struct usb_request, list);
+			list_del_init(&req->list);
+
+			if (req->actual && req->buf) {
+				current_rx_req = req;
+				current_rx_bytes = req->actual;
+				current_rx_buf = req->buf;
+			} else {
+				list_add(&req->list, &dev->rx_reqs);
+				continue;
+			}
+		}
+
+		/* Don't leave irqs off while doing memory copies */
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		if (len > current_rx_bytes)
+			size = current_rx_bytes;
+		else
+			size = len;
+
+		size -= copy_to_user(buf, current_rx_buf, size);
+		bytes_copied += size;
+		len -= size;
+		buf += size;
+
+		spin_lock_irqsave(&dev->lock, flags);
+
+		/* We've disconnected or reset so return. */
+		if (dev->reset_printer) {
+			list_add(&current_rx_req->list, &dev->rx_reqs);
+			spin_unlock_irqrestore(&dev->lock, flags);
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		/* If we not returning all the data left in this RX request
+		 * buffer then adjust the amount of data left in the buffer.
+		 * Othewise if we are done with this RX request buffer then
+		 * requeue it to get any incoming data from the USB host.
+		 */
+		if (size < current_rx_bytes) {
+			current_rx_bytes -= size;
+			current_rx_buf += size;
+		} else {
+			list_add(&current_rx_req->list, &dev->rx_reqs);
+			current_rx_bytes = 0;
+			current_rx_buf = NULL;
+			current_rx_req = NULL;
+		}
+	}
+
+	dev->current_rx_req = current_rx_req;
+	dev->current_rx_bytes = current_rx_bytes;
+	dev->current_rx_buf = current_rx_buf;
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+	mutex_unlock(&dev->lock_printer_io);
+
+	DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
+
+	if (bytes_copied)
+		return bytes_copied;
+	else
+		return -EAGAIN;
+}
+
+static ssize_t
+printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
+{
+	struct printer_dev	*dev = fd->private_data;
+	unsigned long		flags;
+	size_t			size;	/* Amount of data in a TX request. */
+	size_t			bytes_copied = 0;
+	struct usb_request	*req;
+	int			value;
+
+	DBG(dev, "printer_write trying to send %d bytes\n", (int)len);
+
+	if (len == 0)
+		return -EINVAL;
+
+	mutex_lock(&dev->lock_printer_io);
+	spin_lock_irqsave(&dev->lock, flags);
+
+	if (dev->interface < 0) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+		mutex_unlock(&dev->lock_printer_io);
+		return -ENODEV;
+	}
+
+	/* Check if a printer reset happens while we have interrupts on */
+	dev->reset_printer = 0;
+
+	/* Check if there is any available write buffers */
+	if (likely(list_empty(&dev->tx_reqs))) {
+		/* Turn interrupts back on before sleeping. */
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		/*
+		 * If write buffers are available check if this is
+		 * a NON-Blocking call or not.
+		 */
+		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		/* Sleep until a write buffer is available */
+		wait_event_interruptible(dev->tx_wait,
+				(likely(!list_empty(&dev->tx_reqs))));
+		spin_lock_irqsave(&dev->lock, flags);
+	}
+
+	while (likely(!list_empty(&dev->tx_reqs)) && len) {
+
+		if (len > USB_BUFSIZE)
+			size = USB_BUFSIZE;
+		else
+			size = len;
+
+		req = container_of(dev->tx_reqs.next, struct usb_request,
+				list);
+		list_del_init(&req->list);
+
+		req->complete = tx_complete;
+		req->length = size;
+
+		/* Check if we need to send a zero length packet. */
+		if (len > size)
+			/* They will be more TX requests so no yet. */
+			req->zero = 0;
+		else
+			/* If the data amount is not a multiple of the
+			 * maxpacket size then send a zero length packet.
+			 */
+			req->zero = ((len % dev->in_ep->maxpacket) == 0);
+
+		/* Don't leave irqs off while doing memory copies */
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		if (copy_from_user(req->buf, buf, size)) {
+			list_add(&req->list, &dev->tx_reqs);
+			mutex_unlock(&dev->lock_printer_io);
+			return bytes_copied;
+		}
+
+		bytes_copied += size;
+		len -= size;
+		buf += size;
+
+		spin_lock_irqsave(&dev->lock, flags);
+
+		/* We've disconnected or reset so free the req and buffer */
+		if (dev->reset_printer) {
+			list_add(&req->list, &dev->tx_reqs);
+			spin_unlock_irqrestore(&dev->lock, flags);
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		list_add(&req->list, &dev->tx_reqs_active);
+
+		/* here, we unlock, and only unlock, to avoid deadlock. */
+		spin_unlock(&dev->lock);
+		value = usb_ep_queue(dev->in_ep, req, GFP_ATOMIC);
+		spin_lock(&dev->lock);
+		if (value) {
+			list_move(&req->list, &dev->tx_reqs);
+			spin_unlock_irqrestore(&dev->lock, flags);
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+	mutex_unlock(&dev->lock_printer_io);
+
+	DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
+
+	if (bytes_copied)
+		return bytes_copied;
+	else
+		return -EAGAIN;
+}
+
+static int
+printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync)
+{
+	struct printer_dev	*dev = fd->private_data;
+	struct inode *inode = file_inode(fd);
+	unsigned long		flags;
+	int			tx_list_empty;
+
+	inode_lock(inode);
+	spin_lock_irqsave(&dev->lock, flags);
+
+	if (dev->interface < 0) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+		inode_unlock(inode);
+		return -ENODEV;
+	}
+
+	tx_list_empty = (likely(list_empty(&dev->tx_reqs)));
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	if (!tx_list_empty) {
+		/* Sleep until all data has been sent */
+		wait_event_interruptible(dev->tx_flush_wait,
+				(likely(list_empty(&dev->tx_reqs_active))));
+	}
+	inode_unlock(inode);
+
+	return 0;
+}
+
+static __poll_t
+printer_poll(struct file *fd, poll_table *wait)
+{
+	struct printer_dev	*dev = fd->private_data;
+	unsigned long		flags;
+	__poll_t		status = 0;
+
+	mutex_lock(&dev->lock_printer_io);
+	spin_lock_irqsave(&dev->lock, flags);
+
+	if (dev->interface < 0) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+		mutex_unlock(&dev->lock_printer_io);
+		return EPOLLERR | EPOLLHUP;
+	}
+
+	setup_rx_reqs(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
+	mutex_unlock(&dev->lock_printer_io);
+
+	poll_wait(fd, &dev->rx_wait, wait);
+	poll_wait(fd, &dev->tx_wait, wait);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (likely(!list_empty(&dev->tx_reqs)))
+		status |= EPOLLOUT | EPOLLWRNORM;
+
+	if (likely(dev->current_rx_bytes) ||
+			likely(!list_empty(&dev->rx_buffers)))
+		status |= EPOLLIN | EPOLLRDNORM;
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return status;
+}
+
+static long
+printer_ioctl(struct file *fd, unsigned int code, unsigned long arg)
+{
+	struct printer_dev	*dev = fd->private_data;
+	unsigned long		flags;
+	int			status = 0;
+
+	DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg);
+
+	/* handle ioctls */
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	if (dev->interface < 0) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+		return -ENODEV;
+	}
+
+	switch (code) {
+	case GADGET_GET_PRINTER_STATUS:
+		status = (int)dev->printer_status;
+		break;
+	case GADGET_SET_PRINTER_STATUS:
+		dev->printer_status = (u8)arg;
+		break;
+	default:
+		/* could not handle ioctl */
+		DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n",
+				code);
+		status = -ENOTTY;
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return status;
+}
+
+/* used after endpoint configuration */
+static const struct file_operations printer_io_operations = {
+	.owner =	THIS_MODULE,
+	.open =		printer_open,
+	.read =		printer_read,
+	.write =	printer_write,
+	.fsync =	printer_fsync,
+	.poll =		printer_poll,
+	.unlocked_ioctl = printer_ioctl,
+	.release =	printer_close,
+	.llseek =	noop_llseek,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int
+set_printer_interface(struct printer_dev *dev)
+{
+	int			result = 0;
+
+	dev->in_ep->desc = ep_desc(dev->gadget, &fs_ep_in_desc, &hs_ep_in_desc,
+				&ss_ep_in_desc);
+	dev->in_ep->driver_data = dev;
+
+	dev->out_ep->desc = ep_desc(dev->gadget, &fs_ep_out_desc,
+				    &hs_ep_out_desc, &ss_ep_out_desc);
+	dev->out_ep->driver_data = dev;
+
+	result = usb_ep_enable(dev->in_ep);
+	if (result != 0) {
+		DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
+		goto done;
+	}
+
+	result = usb_ep_enable(dev->out_ep);
+	if (result != 0) {
+		DBG(dev, "enable %s --> %d\n", dev->out_ep->name, result);
+		goto done;
+	}
+
+done:
+	/* on error, disable any endpoints  */
+	if (result != 0) {
+		(void) usb_ep_disable(dev->in_ep);
+		(void) usb_ep_disable(dev->out_ep);
+		dev->in_ep->desc = NULL;
+		dev->out_ep->desc = NULL;
+	}
+
+	/* caller is responsible for cleanup on error */
+	return result;
+}
+
+static void printer_reset_interface(struct printer_dev *dev)
+{
+	unsigned long	flags;
+
+	if (dev->interface < 0)
+		return;
+
+	DBG(dev, "%s\n", __func__);
+
+	if (dev->in_ep->desc)
+		usb_ep_disable(dev->in_ep);
+
+	if (dev->out_ep->desc)
+		usb_ep_disable(dev->out_ep);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	dev->in_ep->desc = NULL;
+	dev->out_ep->desc = NULL;
+	dev->interface = -1;
+	spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+/* Change our operational Interface. */
+static int set_interface(struct printer_dev *dev, unsigned number)
+{
+	int			result = 0;
+
+	/* Free the current interface */
+	printer_reset_interface(dev);
+
+	result = set_printer_interface(dev);
+	if (result)
+		printer_reset_interface(dev);
+	else
+		dev->interface = number;
+
+	if (!result)
+		INFO(dev, "Using interface %x\n", number);
+
+	return result;
+}
+
+static void printer_soft_reset(struct printer_dev *dev)
+{
+	struct usb_request	*req;
+
+	INFO(dev, "Received Printer Reset Request\n");
+
+	if (usb_ep_disable(dev->in_ep))
+		DBG(dev, "Failed to disable USB in_ep\n");
+	if (usb_ep_disable(dev->out_ep))
+		DBG(dev, "Failed to disable USB out_ep\n");
+
+	if (dev->current_rx_req != NULL) {
+		list_add(&dev->current_rx_req->list, &dev->rx_reqs);
+		dev->current_rx_req = NULL;
+	}
+	dev->current_rx_bytes = 0;
+	dev->current_rx_buf = NULL;
+	dev->reset_printer = 1;
+
+	while (likely(!(list_empty(&dev->rx_buffers)))) {
+		req = container_of(dev->rx_buffers.next, struct usb_request,
+				list);
+		list_del_init(&req->list);
+		list_add(&req->list, &dev->rx_reqs);
+	}
+
+	while (likely(!(list_empty(&dev->rx_reqs_active)))) {
+		req = container_of(dev->rx_buffers.next, struct usb_request,
+				list);
+		list_del_init(&req->list);
+		list_add(&req->list, &dev->rx_reqs);
+	}
+
+	while (likely(!(list_empty(&dev->tx_reqs_active)))) {
+		req = container_of(dev->tx_reqs_active.next,
+				struct usb_request, list);
+		list_del_init(&req->list);
+		list_add(&req->list, &dev->tx_reqs);
+	}
+
+	if (usb_ep_enable(dev->in_ep))
+		DBG(dev, "Failed to enable USB in_ep\n");
+	if (usb_ep_enable(dev->out_ep))
+		DBG(dev, "Failed to enable USB out_ep\n");
+
+	wake_up_interruptible(&dev->rx_wait);
+	wake_up_interruptible(&dev->tx_wait);
+	wake_up_interruptible(&dev->tx_flush_wait);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static bool gprinter_req_match(struct usb_function *f,
+			       const struct usb_ctrlrequest *ctrl,
+			       bool config0)
+{
+	struct printer_dev	*dev = func_to_printer(f);
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	if (config0)
+		return false;
+
+	if ((ctrl->bRequestType & USB_RECIP_MASK) != USB_RECIP_INTERFACE ||
+	    (ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS)
+		return false;
+
+	switch (ctrl->bRequest) {
+	case GET_DEVICE_ID:
+		w_index >>= 8;
+		if (USB_DIR_IN & ctrl->bRequestType)
+			break;
+		return false;
+	case GET_PORT_STATUS:
+		if (!w_value && w_length == 1 &&
+		    (USB_DIR_IN & ctrl->bRequestType))
+			break;
+		return false;
+	case SOFT_RESET:
+		if (!w_value && !w_length &&
+		   !(USB_DIR_IN & ctrl->bRequestType))
+			break;
+		fallthrough;
+	default:
+		return false;
+	}
+	return w_index == dev->interface;
+}
+
+/*
+ * The setup() callback implements all the ep0 functionality that's not
+ * handled lower down.
+ */
+static int printer_func_setup(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct printer_dev *dev = func_to_printer(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	u8			*buf = req->buf;
+	int			value = -EOPNOTSUPP;
+	u16			wIndex = le16_to_cpu(ctrl->wIndex);
+	u16			wValue = le16_to_cpu(ctrl->wValue);
+	u16			wLength = le16_to_cpu(ctrl->wLength);
+
+	DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n",
+		ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength);
+
+	switch (ctrl->bRequestType&USB_TYPE_MASK) {
+	case USB_TYPE_CLASS:
+		switch (ctrl->bRequest) {
+		case GET_DEVICE_ID: /* Get the IEEE-1284 PNP String */
+			/* Only one printer interface is supported. */
+			if ((wIndex>>8) != dev->interface)
+				break;
+
+			if (!*dev->pnp_string) {
+				value = 0;
+				break;
+			}
+			value = strlen(*dev->pnp_string);
+			buf[0] = (value >> 8) & 0xFF;
+			buf[1] = value & 0xFF;
+			memcpy(buf + 2, *dev->pnp_string, value);
+			DBG(dev, "1284 PNP String: %x %s\n", value,
+			    *dev->pnp_string);
+			break;
+
+		case GET_PORT_STATUS: /* Get Port Status */
+			/* Only one printer interface is supported. */
+			if (wIndex != dev->interface)
+				break;
+
+			buf[0] = dev->printer_status;
+			value = min_t(u16, wLength, 1);
+			break;
+
+		case SOFT_RESET: /* Soft Reset */
+			/* Only one printer interface is supported. */
+			if (wIndex != dev->interface)
+				break;
+
+			printer_soft_reset(dev);
+
+			value = 0;
+			break;
+
+		default:
+			goto unknown;
+		}
+		break;
+
+	default:
+unknown:
+		VDBG(dev,
+			"unknown ctrl req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			wValue, wIndex, wLength);
+		break;
+	}
+	/* host either stalls (value < 0) or reports success */
+	if (value >= 0) {
+		req->length = value;
+		req->zero = value < wLength;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0) {
+			ERROR(dev, "%s:%d Error!\n", __func__, __LINE__);
+			req->status = 0;
+		}
+	}
+	return value;
+}
+
+static int printer_func_bind(struct usb_configuration *c,
+		struct usb_function *f)
+{
+	struct usb_gadget *gadget = c->cdev->gadget;
+	struct printer_dev *dev = func_to_printer(f);
+	struct device *pdev;
+	struct usb_composite_dev *cdev = c->cdev;
+	struct usb_ep *in_ep;
+	struct usb_ep *out_ep = NULL;
+	struct usb_request *req;
+	dev_t devt;
+	int id;
+	int ret;
+	u32 i;
+
+	id = usb_interface_id(c, f);
+	if (id < 0)
+		return id;
+	intf_desc.bInterfaceNumber = id;
+
+	/* finish hookup to lower layer ... */
+	dev->gadget = gadget;
+
+	/* all we really need is bulk IN/OUT */
+	in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc);
+	if (!in_ep) {
+autoconf_fail:
+		dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n",
+			cdev->gadget->name);
+		return -ENODEV;
+	}
+
+	out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc);
+	if (!out_ep)
+		goto autoconf_fail;
+
+	/* assumes that all endpoints are dual-speed */
+	hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
+	hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
+	ss_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
+	ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
+
+	ret = usb_assign_descriptors(f, fs_printer_function,
+			hs_printer_function, ss_printer_function,
+			ss_printer_function);
+	if (ret)
+		return ret;
+
+	dev->in_ep = in_ep;
+	dev->out_ep = out_ep;
+
+	ret = -ENOMEM;
+	for (i = 0; i < dev->q_len; i++) {
+		req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
+		if (!req)
+			goto fail_tx_reqs;
+		list_add(&req->list, &dev->tx_reqs);
+	}
+
+	for (i = 0; i < dev->q_len; i++) {
+		req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL);
+		if (!req)
+			goto fail_rx_reqs;
+		list_add(&req->list, &dev->rx_reqs);
+	}
+
+	/* Setup the sysfs files for the printer gadget. */
+	devt = MKDEV(major, dev->minor);
+	pdev = device_create(usb_gadget_class, NULL, devt,
+				  NULL, "g_printer%d", dev->minor);
+	if (IS_ERR(pdev)) {
+		ERROR(dev, "Failed to create device: g_printer\n");
+		ret = PTR_ERR(pdev);
+		goto fail_rx_reqs;
+	}
+
+	/*
+	 * Register a character device as an interface to a user mode
+	 * program that handles the printer specific functionality.
+	 */
+	cdev_init(&dev->printer_cdev, &printer_io_operations);
+	dev->printer_cdev.owner = THIS_MODULE;
+	ret = cdev_add(&dev->printer_cdev, devt, 1);
+	if (ret) {
+		ERROR(dev, "Failed to open char device\n");
+		goto fail_cdev_add;
+	}
+
+	return 0;
+
+fail_cdev_add:
+	device_destroy(usb_gadget_class, devt);
+
+fail_rx_reqs:
+	while (!list_empty(&dev->rx_reqs)) {
+		req = container_of(dev->rx_reqs.next, struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->out_ep, req);
+	}
+
+fail_tx_reqs:
+	while (!list_empty(&dev->tx_reqs)) {
+		req = container_of(dev->tx_reqs.next, struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->in_ep, req);
+	}
+
+	usb_free_all_descriptors(f);
+	return ret;
+
+}
+
+static int printer_func_set_alt(struct usb_function *f,
+		unsigned intf, unsigned alt)
+{
+	struct printer_dev *dev = func_to_printer(f);
+	int ret = -ENOTSUPP;
+
+	if (!alt)
+		ret = set_interface(dev, intf);
+
+	return ret;
+}
+
+static void printer_func_disable(struct usb_function *f)
+{
+	struct printer_dev *dev = func_to_printer(f);
+
+	DBG(dev, "%s\n", __func__);
+
+	printer_reset_interface(dev);
+}
+
+static inline struct f_printer_opts
+*to_f_printer_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_printer_opts,
+			    func_inst.group);
+}
+
+static void printer_attr_release(struct config_item *item)
+{
+	struct f_printer_opts *opts = to_f_printer_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations printer_item_ops = {
+	.release	= printer_attr_release,
+};
+
+static ssize_t f_printer_opts_pnp_string_show(struct config_item *item,
+					      char *page)
+{
+	struct f_printer_opts *opts = to_f_printer_opts(item);
+	int result = 0;
+
+	mutex_lock(&opts->lock);
+	if (!opts->pnp_string)
+		goto unlock;
+
+	result = strlcpy(page, opts->pnp_string, PAGE_SIZE);
+	if (result >= PAGE_SIZE) {
+		result = PAGE_SIZE;
+	} else if (page[result - 1] != '\n' && result + 1 < PAGE_SIZE) {
+		page[result++] = '\n';
+		page[result] = '\0';
+	}
+
+unlock:
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_printer_opts_pnp_string_store(struct config_item *item,
+					       const char *page, size_t len)
+{
+	struct f_printer_opts *opts = to_f_printer_opts(item);
+	char *new_pnp;
+	int result;
+
+	mutex_lock(&opts->lock);
+
+	new_pnp = kstrndup(page, len, GFP_KERNEL);
+	if (!new_pnp) {
+		result = -ENOMEM;
+		goto unlock;
+	}
+
+	if (opts->pnp_string_allocated)
+		kfree(opts->pnp_string);
+
+	opts->pnp_string_allocated = true;
+	opts->pnp_string = new_pnp;
+	result = len;
+unlock:
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+CONFIGFS_ATTR(f_printer_opts_, pnp_string);
+
+static ssize_t f_printer_opts_q_len_show(struct config_item *item,
+					 char *page)
+{
+	struct f_printer_opts *opts = to_f_printer_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d\n", opts->q_len);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_printer_opts_q_len_store(struct config_item *item,
+					  const char *page, size_t len)
+{
+	struct f_printer_opts *opts = to_f_printer_opts(item);
+	int ret;
+	u16 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou16(page, 0, &num);
+	if (ret)
+		goto end;
+
+	opts->q_len = (unsigned)num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+CONFIGFS_ATTR(f_printer_opts_, q_len);
+
+static struct configfs_attribute *printer_attrs[] = {
+	&f_printer_opts_attr_pnp_string,
+	&f_printer_opts_attr_q_len,
+	NULL,
+};
+
+static const struct config_item_type printer_func_type = {
+	.ct_item_ops	= &printer_item_ops,
+	.ct_attrs	= printer_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static inline int gprinter_get_minor(void)
+{
+	int ret;
+
+	ret = ida_simple_get(&printer_ida, 0, 0, GFP_KERNEL);
+	if (ret >= PRINTER_MINORS) {
+		ida_simple_remove(&printer_ida, ret);
+		ret = -ENODEV;
+	}
+
+	return ret;
+}
+
+static inline void gprinter_put_minor(int minor)
+{
+	ida_simple_remove(&printer_ida, minor);
+}
+
+static int gprinter_setup(int);
+static void gprinter_cleanup(void);
+
+static void gprinter_free_inst(struct usb_function_instance *f)
+{
+	struct f_printer_opts *opts;
+
+	opts = container_of(f, struct f_printer_opts, func_inst);
+
+	mutex_lock(&printer_ida_lock);
+
+	gprinter_put_minor(opts->minor);
+	if (ida_is_empty(&printer_ida))
+		gprinter_cleanup();
+
+	mutex_unlock(&printer_ida_lock);
+
+	if (opts->pnp_string_allocated)
+		kfree(opts->pnp_string);
+	kfree(opts);
+}
+
+static struct usb_function_instance *gprinter_alloc_inst(void)
+{
+	struct f_printer_opts *opts;
+	struct usb_function_instance *ret;
+	int status = 0;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&opts->lock);
+	opts->func_inst.free_func_inst = gprinter_free_inst;
+	ret = &opts->func_inst;
+
+	/* Make sure q_len is initialized, otherwise the bound device can't support read/write! */
+	opts->q_len = DEFAULT_Q_LEN;
+
+	mutex_lock(&printer_ida_lock);
+
+	if (ida_is_empty(&printer_ida)) {
+		status = gprinter_setup(PRINTER_MINORS);
+		if (status) {
+			ret = ERR_PTR(status);
+			kfree(opts);
+			goto unlock;
+		}
+	}
+
+	opts->minor = gprinter_get_minor();
+	if (opts->minor < 0) {
+		ret = ERR_PTR(opts->minor);
+		kfree(opts);
+		if (ida_is_empty(&printer_ida))
+			gprinter_cleanup();
+		goto unlock;
+	}
+	config_group_init_type_name(&opts->func_inst.group, "",
+				    &printer_func_type);
+
+unlock:
+	mutex_unlock(&printer_ida_lock);
+	return ret;
+}
+
+static void gprinter_free(struct usb_function *f)
+{
+	struct printer_dev *dev = func_to_printer(f);
+	struct f_printer_opts *opts;
+
+	opts = container_of(f->fi, struct f_printer_opts, func_inst);
+
+	kref_put(&dev->kref, printer_dev_free);
+	mutex_lock(&opts->lock);
+	--opts->refcnt;
+	mutex_unlock(&opts->lock);
+}
+
+static void printer_func_unbind(struct usb_configuration *c,
+		struct usb_function *f)
+{
+	struct printer_dev	*dev;
+	struct usb_request	*req;
+
+	dev = func_to_printer(f);
+
+	device_destroy(usb_gadget_class, MKDEV(major, dev->minor));
+
+	/* Remove Character Device */
+	cdev_del(&dev->printer_cdev);
+
+	/* we must already have been disconnected ... no i/o may be active */
+	WARN_ON(!list_empty(&dev->tx_reqs_active));
+	WARN_ON(!list_empty(&dev->rx_reqs_active));
+
+	/* Free all memory for this driver. */
+	while (!list_empty(&dev->tx_reqs)) {
+		req = container_of(dev->tx_reqs.next, struct usb_request,
+				list);
+		list_del(&req->list);
+		printer_req_free(dev->in_ep, req);
+	}
+
+	if (dev->current_rx_req != NULL)
+		printer_req_free(dev->out_ep, dev->current_rx_req);
+
+	while (!list_empty(&dev->rx_reqs)) {
+		req = container_of(dev->rx_reqs.next,
+				struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->out_ep, req);
+	}
+
+	while (!list_empty(&dev->rx_buffers)) {
+		req = container_of(dev->rx_buffers.next,
+				struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->out_ep, req);
+	}
+	usb_free_all_descriptors(f);
+}
+
+static struct usb_function *gprinter_alloc(struct usb_function_instance *fi)
+{
+	struct printer_dev	*dev;
+	struct f_printer_opts	*opts;
+
+	opts = container_of(fi, struct f_printer_opts, func_inst);
+
+	mutex_lock(&opts->lock);
+	if (opts->minor >= minors) {
+		mutex_unlock(&opts->lock);
+		return ERR_PTR(-ENOENT);
+	}
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev) {
+		mutex_unlock(&opts->lock);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	kref_init(&dev->kref);
+	++opts->refcnt;
+	dev->minor = opts->minor;
+	dev->pnp_string = &opts->pnp_string;
+	dev->q_len = opts->q_len;
+	mutex_unlock(&opts->lock);
+
+	dev->function.name = "printer";
+	dev->function.bind = printer_func_bind;
+	dev->function.setup = printer_func_setup;
+	dev->function.unbind = printer_func_unbind;
+	dev->function.set_alt = printer_func_set_alt;
+	dev->function.disable = printer_func_disable;
+	dev->function.req_match = gprinter_req_match;
+	dev->function.free_func = gprinter_free;
+
+	INIT_LIST_HEAD(&dev->tx_reqs);
+	INIT_LIST_HEAD(&dev->rx_reqs);
+	INIT_LIST_HEAD(&dev->rx_buffers);
+	INIT_LIST_HEAD(&dev->tx_reqs_active);
+	INIT_LIST_HEAD(&dev->rx_reqs_active);
+
+	spin_lock_init(&dev->lock);
+	mutex_init(&dev->lock_printer_io);
+	init_waitqueue_head(&dev->rx_wait);
+	init_waitqueue_head(&dev->tx_wait);
+	init_waitqueue_head(&dev->tx_flush_wait);
+
+	dev->interface = -1;
+	dev->printer_cdev_open = 0;
+	dev->printer_status = PRINTER_NOT_ERROR;
+	dev->current_rx_req = NULL;
+	dev->current_rx_bytes = 0;
+	dev->current_rx_buf = NULL;
+
+	return &dev->function;
+}
+
+DECLARE_USB_FUNCTION_INIT(printer, gprinter_alloc_inst, gprinter_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Craig Nadler");
+
+static int gprinter_setup(int count)
+{
+	int status;
+	dev_t devt;
+
+	usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget");
+	if (IS_ERR(usb_gadget_class)) {
+		status = PTR_ERR(usb_gadget_class);
+		usb_gadget_class = NULL;
+		pr_err("unable to create usb_gadget class %d\n", status);
+		return status;
+	}
+
+	status = alloc_chrdev_region(&devt, 0, count, "USB printer gadget");
+	if (status) {
+		pr_err("alloc_chrdev_region %d\n", status);
+		class_destroy(usb_gadget_class);
+		usb_gadget_class = NULL;
+		return status;
+	}
+
+	major = MAJOR(devt);
+	minors = count;
+
+	return status;
+}
+
+static void gprinter_cleanup(void)
+{
+	if (major) {
+		unregister_chrdev_region(MKDEV(major, 0), minors);
+		major = minors = 0;
+	}
+	class_destroy(usb_gadget_class);
+	usb_gadget_class = NULL;
+}
diff --git a/drivers/usb/gadget/function/f_rndis.c b/drivers/usb/gadget/function/f_rndis.c
new file mode 100644
index 000000000..ee95e8f5f
--- /dev/null
+++ b/drivers/usb/gadget/function/f_rndis.c
@@ -0,0 +1,1032 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_rndis.c -- RNDIS link function driver
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2009 Samsung Electronics
+ *                    Author: Michal Nazarewicz (mina86@mina86.com)
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+
+#include <linux/atomic.h>
+
+#include "u_ether.h"
+#include "u_ether_configfs.h"
+#include "u_rndis.h"
+#include "rndis.h"
+#include "configfs.h"
+
+/*
+ * This function is an RNDIS Ethernet port -- a Microsoft protocol that's
+ * been promoted instead of the standard CDC Ethernet.  The published RNDIS
+ * spec is ambiguous, incomplete, and needlessly complex.  Variants such as
+ * ActiveSync have even worse status in terms of specification.
+ *
+ * In short:  it's a protocol controlled by (and for) Microsoft, not for an
+ * Open ecosystem or markets.  Linux supports it *only* because Microsoft
+ * doesn't support the CDC Ethernet standard.
+ *
+ * The RNDIS data transfer model is complex, with multiple Ethernet packets
+ * per USB message, and out of band data.  The control model is built around
+ * what's essentially an "RNDIS RPC" protocol.  It's all wrapped in a CDC ACM
+ * (modem, not Ethernet) veneer, with those ACM descriptors being entirely
+ * useless (they're ignored).  RNDIS expects to be the only function in its
+ * configuration, so it's no real help if you need composite devices; and
+ * it expects to be the first configuration too.
+ *
+ * There is a single technical advantage of RNDIS over CDC Ethernet, if you
+ * discount the fluff that its RPC can be made to deliver: it doesn't need
+ * a NOP altsetting for the data interface.  That lets it work on some of the
+ * "so smart it's stupid" hardware which takes over configuration changes
+ * from the software, and adds restrictions like "no altsettings".
+ *
+ * Unfortunately MSFT's RNDIS drivers are buggy.  They hang or oops, and
+ * have all sorts of contrary-to-specification oddities that can prevent
+ * them from working sanely.  Since bugfixes (or accurate specs, letting
+ * Linux work around those bugs) are unlikely to ever come from MSFT, you
+ * may want to avoid using RNDIS on purely operational grounds.
+ *
+ * Omissions from the RNDIS 1.0 specification include:
+ *
+ *   - Power management ... references data that's scattered around lots
+ *     of other documentation, which is incorrect/incomplete there too.
+ *
+ *   - There are various undocumented protocol requirements, like the need
+ *     to send garbage in some control-OUT messages.
+ *
+ *   - MS-Windows drivers sometimes emit undocumented requests.
+ */
+
+struct f_rndis {
+	struct gether			port;
+	u8				ctrl_id, data_id;
+	u8				ethaddr[ETH_ALEN];
+	u32				vendorID;
+	const char			*manufacturer;
+	struct rndis_params		*params;
+
+	struct usb_ep			*notify;
+	struct usb_request		*notify_req;
+	atomic_t			notify_count;
+};
+
+static inline struct f_rndis *func_to_rndis(struct usb_function *f)
+{
+	return container_of(f, struct f_rndis, port.func);
+}
+
+/* peak (theoretical) bulk transfer rate in bits-per-second */
+static unsigned int bitrate(struct usb_gadget *g)
+{
+	if (gadget_is_superspeed(g) && g->speed >= USB_SPEED_SUPER_PLUS)
+		return 4250000000U;
+	if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
+		return 3750000000U;
+	else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+		return 13 * 512 * 8 * 1000 * 8;
+	else
+		return 19 * 64 * 1 * 1000 * 8;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ */
+
+#define RNDIS_STATUS_INTERVAL_MS	32
+#define STATUS_BYTECOUNT		8	/* 8 bytes data */
+
+
+/* interface descriptor: */
+
+static struct usb_interface_descriptor rndis_control_intf = {
+	.bLength =		sizeof rndis_control_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	/* .bInterfaceNumber = DYNAMIC */
+	/* status endpoint is optional; this could be patched later */
+	.bNumEndpoints =	1,
+	.bInterfaceClass =	USB_CLASS_COMM,
+	.bInterfaceSubClass =   USB_CDC_SUBCLASS_ACM,
+	.bInterfaceProtocol =   USB_CDC_ACM_PROTO_VENDOR,
+	/* .iInterface = DYNAMIC */
+};
+
+static struct usb_cdc_header_desc header_desc = {
+	.bLength =		sizeof header_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
+
+	.bcdCDC =		cpu_to_le16(0x0110),
+};
+
+static struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor = {
+	.bLength =		sizeof call_mgmt_descriptor,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_CALL_MANAGEMENT_TYPE,
+
+	.bmCapabilities =	0x00,
+	.bDataInterface =	0x01,
+};
+
+static struct usb_cdc_acm_descriptor rndis_acm_descriptor = {
+	.bLength =		sizeof rndis_acm_descriptor,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_ACM_TYPE,
+
+	.bmCapabilities =	0x00,
+};
+
+static struct usb_cdc_union_desc rndis_union_desc = {
+	.bLength =		sizeof(rndis_union_desc),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_UNION_TYPE,
+	/* .bMasterInterface0 =	DYNAMIC */
+	/* .bSlaveInterface0 =	DYNAMIC */
+};
+
+/* the data interface has two bulk endpoints */
+
+static struct usb_interface_descriptor rndis_data_intf = {
+	.bLength =		sizeof rndis_data_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	/* .bInterfaceNumber = DYNAMIC */
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_CDC_DATA,
+	.bInterfaceSubClass =	0,
+	.bInterfaceProtocol =	0,
+	/* .iInterface = DYNAMIC */
+};
+
+
+static struct usb_interface_assoc_descriptor
+rndis_iad_descriptor = {
+	.bLength =		sizeof rndis_iad_descriptor,
+	.bDescriptorType =	USB_DT_INTERFACE_ASSOCIATION,
+
+	.bFirstInterface =	0, /* XXX, hardcoded */
+	.bInterfaceCount = 	2,	// control + data
+	.bFunctionClass =	USB_CLASS_COMM,
+	.bFunctionSubClass =	USB_CDC_SUBCLASS_ETHERNET,
+	.bFunctionProtocol =	USB_CDC_PROTO_NONE,
+	/* .iFunction = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor fs_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(STATUS_BYTECOUNT),
+	.bInterval =		RNDIS_STATUS_INTERVAL_MS,
+};
+
+static struct usb_endpoint_descriptor fs_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor fs_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *eth_fs_function[] = {
+	(struct usb_descriptor_header *) &rndis_iad_descriptor,
+
+	/* control interface matches ACM, not Ethernet */
+	(struct usb_descriptor_header *) &rndis_control_intf,
+	(struct usb_descriptor_header *) &header_desc,
+	(struct usb_descriptor_header *) &call_mgmt_descriptor,
+	(struct usb_descriptor_header *) &rndis_acm_descriptor,
+	(struct usb_descriptor_header *) &rndis_union_desc,
+	(struct usb_descriptor_header *) &fs_notify_desc,
+
+	/* data interface has no altsetting */
+	(struct usb_descriptor_header *) &rndis_data_intf,
+	(struct usb_descriptor_header *) &fs_in_desc,
+	(struct usb_descriptor_header *) &fs_out_desc,
+	NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor hs_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(STATUS_BYTECOUNT),
+	.bInterval =		USB_MS_TO_HS_INTERVAL(RNDIS_STATUS_INTERVAL_MS)
+};
+
+static struct usb_endpoint_descriptor hs_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor hs_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *eth_hs_function[] = {
+	(struct usb_descriptor_header *) &rndis_iad_descriptor,
+
+	/* control interface matches ACM, not Ethernet */
+	(struct usb_descriptor_header *) &rndis_control_intf,
+	(struct usb_descriptor_header *) &header_desc,
+	(struct usb_descriptor_header *) &call_mgmt_descriptor,
+	(struct usb_descriptor_header *) &rndis_acm_descriptor,
+	(struct usb_descriptor_header *) &rndis_union_desc,
+	(struct usb_descriptor_header *) &hs_notify_desc,
+
+	/* data interface has no altsetting */
+	(struct usb_descriptor_header *) &rndis_data_intf,
+	(struct usb_descriptor_header *) &hs_in_desc,
+	(struct usb_descriptor_header *) &hs_out_desc,
+	NULL,
+};
+
+/* super speed support: */
+
+static struct usb_endpoint_descriptor ss_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(STATUS_BYTECOUNT),
+	.bInterval =		USB_MS_TO_HS_INTERVAL(RNDIS_STATUS_INTERVAL_MS)
+};
+
+static struct usb_ss_ep_comp_descriptor ss_intr_comp_desc = {
+	.bLength =		sizeof ss_intr_comp_desc,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 3 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+	.wBytesPerInterval =	cpu_to_le16(STATUS_BYTECOUNT),
+};
+
+static struct usb_endpoint_descriptor ss_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor ss_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_bulk_comp_desc = {
+	.bLength =		sizeof ss_bulk_comp_desc,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 2 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+};
+
+static struct usb_descriptor_header *eth_ss_function[] = {
+	(struct usb_descriptor_header *) &rndis_iad_descriptor,
+
+	/* control interface matches ACM, not Ethernet */
+	(struct usb_descriptor_header *) &rndis_control_intf,
+	(struct usb_descriptor_header *) &header_desc,
+	(struct usb_descriptor_header *) &call_mgmt_descriptor,
+	(struct usb_descriptor_header *) &rndis_acm_descriptor,
+	(struct usb_descriptor_header *) &rndis_union_desc,
+	(struct usb_descriptor_header *) &ss_notify_desc,
+	(struct usb_descriptor_header *) &ss_intr_comp_desc,
+
+	/* data interface has no altsetting */
+	(struct usb_descriptor_header *) &rndis_data_intf,
+	(struct usb_descriptor_header *) &ss_in_desc,
+	(struct usb_descriptor_header *) &ss_bulk_comp_desc,
+	(struct usb_descriptor_header *) &ss_out_desc,
+	(struct usb_descriptor_header *) &ss_bulk_comp_desc,
+	NULL,
+};
+
+/* string descriptors: */
+
+static struct usb_string rndis_string_defs[] = {
+	[0].s = "RNDIS Communications Control",
+	[1].s = "RNDIS Ethernet Data",
+	[2].s = "RNDIS",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings rndis_string_table = {
+	.language =		0x0409,	/* en-us */
+	.strings =		rndis_string_defs,
+};
+
+static struct usb_gadget_strings *rndis_strings[] = {
+	&rndis_string_table,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static struct sk_buff *rndis_add_header(struct gether *port,
+					struct sk_buff *skb)
+{
+	struct sk_buff *skb2;
+
+	if (!skb)
+		return NULL;
+
+	skb2 = skb_realloc_headroom(skb, sizeof(struct rndis_packet_msg_type));
+	rndis_add_hdr(skb2);
+
+	dev_kfree_skb(skb);
+	return skb2;
+}
+
+static void rndis_response_available(void *_rndis)
+{
+	struct f_rndis			*rndis = _rndis;
+	struct usb_request		*req = rndis->notify_req;
+	struct usb_composite_dev	*cdev = rndis->port.func.config->cdev;
+	__le32				*data = req->buf;
+	int				status;
+
+	if (atomic_inc_return(&rndis->notify_count) != 1)
+		return;
+
+	/* Send RNDIS RESPONSE_AVAILABLE notification; a
+	 * USB_CDC_NOTIFY_RESPONSE_AVAILABLE "should" work too
+	 *
+	 * This is the only notification defined by RNDIS.
+	 */
+	data[0] = cpu_to_le32(1);
+	data[1] = cpu_to_le32(0);
+
+	status = usb_ep_queue(rndis->notify, req, GFP_ATOMIC);
+	if (status) {
+		atomic_dec(&rndis->notify_count);
+		DBG(cdev, "notify/0 --> %d\n", status);
+	}
+}
+
+static void rndis_response_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_rndis			*rndis = req->context;
+	struct usb_composite_dev	*cdev = rndis->port.func.config->cdev;
+	int				status = req->status;
+
+	/* after TX:
+	 *  - USB_CDC_GET_ENCAPSULATED_RESPONSE (ep0/control)
+	 *  - RNDIS_RESPONSE_AVAILABLE (status/irq)
+	 */
+	switch (status) {
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		/* connection gone */
+		atomic_set(&rndis->notify_count, 0);
+		break;
+	default:
+		DBG(cdev, "RNDIS %s response error %d, %d/%d\n",
+			ep->name, status,
+			req->actual, req->length);
+		fallthrough;
+	case 0:
+		if (ep != rndis->notify)
+			break;
+
+		/* handle multiple pending RNDIS_RESPONSE_AVAILABLE
+		 * notifications by resending until we're done
+		 */
+		if (atomic_dec_and_test(&rndis->notify_count))
+			break;
+		status = usb_ep_queue(rndis->notify, req, GFP_ATOMIC);
+		if (status) {
+			atomic_dec(&rndis->notify_count);
+			DBG(cdev, "notify/1 --> %d\n", status);
+		}
+		break;
+	}
+}
+
+static void rndis_command_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_rndis			*rndis = req->context;
+	int				status;
+
+	/* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */
+//	spin_lock(&dev->lock);
+	status = rndis_msg_parser(rndis->params, (u8 *) req->buf);
+	if (status < 0)
+		pr_err("RNDIS command error %d, %d/%d\n",
+			status, req->actual, req->length);
+//	spin_unlock(&dev->lock);
+}
+
+static int
+rndis_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+	struct f_rndis		*rndis = func_to_rndis(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	int			value = -EOPNOTSUPP;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	/* composite driver infrastructure handles everything except
+	 * CDC class messages; interface activation uses set_alt().
+	 */
+	switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
+
+	/* RNDIS uses the CDC command encapsulation mechanism to implement
+	 * an RPC scheme, with much getting/setting of attributes by OID.
+	 */
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+			| USB_CDC_SEND_ENCAPSULATED_COMMAND:
+		if (w_value || w_index != rndis->ctrl_id)
+			goto invalid;
+		/* read the request; process it later */
+		value = w_length;
+		req->complete = rndis_command_complete;
+		req->context = rndis;
+		/* later, rndis_response_available() sends a notification */
+		break;
+
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+			| USB_CDC_GET_ENCAPSULATED_RESPONSE:
+		if (w_value || w_index != rndis->ctrl_id)
+			goto invalid;
+		else {
+			u8 *buf;
+			u32 n;
+
+			/* return the result */
+			buf = rndis_get_next_response(rndis->params, &n);
+			if (buf) {
+				memcpy(req->buf, buf, n);
+				req->complete = rndis_response_complete;
+				req->context = rndis;
+				rndis_free_response(rndis->params, buf);
+				value = n;
+			}
+			/* else stalls ... spec says to avoid that */
+		}
+		break;
+
+	default:
+invalid:
+		VDBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+	}
+
+	/* respond with data transfer or status phase? */
+	if (value >= 0) {
+		DBG(cdev, "rndis req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+		req->zero = (value < w_length);
+		req->length = value;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0)
+			ERROR(cdev, "rndis response on err %d\n", value);
+	}
+
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+
+static int rndis_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_rndis		*rndis = func_to_rndis(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	/* we know alt == 0 */
+
+	if (intf == rndis->ctrl_id) {
+		VDBG(cdev, "reset rndis control %d\n", intf);
+		usb_ep_disable(rndis->notify);
+
+		if (!rndis->notify->desc) {
+			VDBG(cdev, "init rndis ctrl %d\n", intf);
+			if (config_ep_by_speed(cdev->gadget, f, rndis->notify))
+				goto fail;
+		}
+		usb_ep_enable(rndis->notify);
+
+	} else if (intf == rndis->data_id) {
+		struct net_device	*net;
+
+		if (rndis->port.in_ep->enabled) {
+			DBG(cdev, "reset rndis\n");
+			gether_disconnect(&rndis->port);
+		}
+
+		if (!rndis->port.in_ep->desc || !rndis->port.out_ep->desc) {
+			DBG(cdev, "init rndis\n");
+			if (config_ep_by_speed(cdev->gadget, f,
+					       rndis->port.in_ep) ||
+			    config_ep_by_speed(cdev->gadget, f,
+					       rndis->port.out_ep)) {
+				rndis->port.in_ep->desc = NULL;
+				rndis->port.out_ep->desc = NULL;
+				goto fail;
+			}
+		}
+
+		/* Avoid ZLPs; they can be troublesome. */
+		rndis->port.is_zlp_ok = false;
+
+		/* RNDIS should be in the "RNDIS uninitialized" state,
+		 * either never activated or after rndis_uninit().
+		 *
+		 * We don't want data to flow here until a nonzero packet
+		 * filter is set, at which point it enters "RNDIS data
+		 * initialized" state ... but we do want the endpoints
+		 * to be activated.  It's a strange little state.
+		 *
+		 * REVISIT the RNDIS gadget code has done this wrong for a
+		 * very long time.  We need another call to the link layer
+		 * code -- gether_updown(...bool) maybe -- to do it right.
+		 */
+		rndis->port.cdc_filter = 0;
+
+		DBG(cdev, "RNDIS RX/TX early activation ... \n");
+		net = gether_connect(&rndis->port);
+		if (IS_ERR(net))
+			return PTR_ERR(net);
+
+		rndis_set_param_dev(rndis->params, net,
+				&rndis->port.cdc_filter);
+	} else
+		goto fail;
+
+	return 0;
+fail:
+	return -EINVAL;
+}
+
+static void rndis_disable(struct usb_function *f)
+{
+	struct f_rndis		*rndis = func_to_rndis(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	if (!rndis->notify->enabled)
+		return;
+
+	DBG(cdev, "rndis deactivated\n");
+
+	rndis_uninit(rndis->params);
+	gether_disconnect(&rndis->port);
+
+	usb_ep_disable(rndis->notify);
+	rndis->notify->desc = NULL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * This isn't quite the same mechanism as CDC Ethernet, since the
+ * notification scheme passes less data, but the same set of link
+ * states must be tested.  A key difference is that altsettings are
+ * not used to tell whether the link should send packets or not.
+ */
+
+static void rndis_open(struct gether *geth)
+{
+	struct f_rndis		*rndis = func_to_rndis(&geth->func);
+	struct usb_composite_dev *cdev = geth->func.config->cdev;
+
+	DBG(cdev, "%s\n", __func__);
+
+	rndis_set_param_medium(rndis->params, RNDIS_MEDIUM_802_3,
+				bitrate(cdev->gadget) / 100);
+	rndis_signal_connect(rndis->params);
+}
+
+static void rndis_close(struct gether *geth)
+{
+	struct f_rndis		*rndis = func_to_rndis(&geth->func);
+
+	DBG(geth->func.config->cdev, "%s\n", __func__);
+
+	rndis_set_param_medium(rndis->params, RNDIS_MEDIUM_802_3, 0);
+	rndis_signal_disconnect(rndis->params);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Some controllers can't support RNDIS ... */
+static inline bool can_support_rndis(struct usb_configuration *c)
+{
+	/* everything else is *presumably* fine */
+	return true;
+}
+
+/* ethernet function driver setup/binding */
+
+static int
+rndis_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_rndis		*rndis = func_to_rndis(f);
+	struct usb_string	*us;
+	int			status;
+	struct usb_ep		*ep;
+
+	struct f_rndis_opts *rndis_opts;
+
+	if (!can_support_rndis(c))
+		return -EINVAL;
+
+	rndis_opts = container_of(f->fi, struct f_rndis_opts, func_inst);
+
+	if (cdev->use_os_string) {
+		f->os_desc_table = kzalloc(sizeof(*f->os_desc_table),
+					   GFP_KERNEL);
+		if (!f->os_desc_table)
+			return -ENOMEM;
+		f->os_desc_n = 1;
+		f->os_desc_table[0].os_desc = &rndis_opts->rndis_os_desc;
+	}
+
+	rndis_iad_descriptor.bFunctionClass = rndis_opts->class;
+	rndis_iad_descriptor.bFunctionSubClass = rndis_opts->subclass;
+	rndis_iad_descriptor.bFunctionProtocol = rndis_opts->protocol;
+
+	/*
+	 * in drivers/usb/gadget/configfs.c:configfs_composite_bind()
+	 * configurations are bound in sequence with list_for_each_entry,
+	 * in each configuration its functions are bound in sequence
+	 * with list_for_each_entry, so we assume no race condition
+	 * with regard to rndis_opts->bound access
+	 */
+	if (!rndis_opts->bound) {
+		gether_set_gadget(rndis_opts->net, cdev->gadget);
+		status = gether_register_netdev(rndis_opts->net);
+		if (status)
+			goto fail;
+		rndis_opts->bound = true;
+	}
+
+	us = usb_gstrings_attach(cdev, rndis_strings,
+				 ARRAY_SIZE(rndis_string_defs));
+	if (IS_ERR(us)) {
+		status = PTR_ERR(us);
+		goto fail;
+	}
+	rndis_control_intf.iInterface = us[0].id;
+	rndis_data_intf.iInterface = us[1].id;
+	rndis_iad_descriptor.iFunction = us[2].id;
+
+	/* allocate instance-specific interface IDs */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	rndis->ctrl_id = status;
+	rndis_iad_descriptor.bFirstInterface = status;
+
+	rndis_control_intf.bInterfaceNumber = status;
+	rndis_union_desc.bMasterInterface0 = status;
+
+	if (cdev->use_os_string)
+		f->os_desc_table[0].if_id =
+			rndis_iad_descriptor.bFirstInterface;
+
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	rndis->data_id = status;
+
+	rndis_data_intf.bInterfaceNumber = status;
+	rndis_union_desc.bSlaveInterface0 = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_in_desc);
+	if (!ep)
+		goto fail;
+	rndis->port.in_ep = ep;
+
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_out_desc);
+	if (!ep)
+		goto fail;
+	rndis->port.out_ep = ep;
+
+	/* NOTE:  a status/notification endpoint is, strictly speaking,
+	 * optional.  We don't treat it that way though!  It's simpler,
+	 * and some newer profiles don't treat it as optional.
+	 */
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_notify_desc);
+	if (!ep)
+		goto fail;
+	rndis->notify = ep;
+
+	status = -ENOMEM;
+
+	/* allocate notification request and buffer */
+	rndis->notify_req = usb_ep_alloc_request(ep, GFP_KERNEL);
+	if (!rndis->notify_req)
+		goto fail;
+	rndis->notify_req->buf = kmalloc(STATUS_BYTECOUNT, GFP_KERNEL);
+	if (!rndis->notify_req->buf)
+		goto fail;
+	rndis->notify_req->length = STATUS_BYTECOUNT;
+	rndis->notify_req->context = rndis;
+	rndis->notify_req->complete = rndis_response_complete;
+
+	/* support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+	hs_in_desc.bEndpointAddress = fs_in_desc.bEndpointAddress;
+	hs_out_desc.bEndpointAddress = fs_out_desc.bEndpointAddress;
+	hs_notify_desc.bEndpointAddress = fs_notify_desc.bEndpointAddress;
+
+	ss_in_desc.bEndpointAddress = fs_in_desc.bEndpointAddress;
+	ss_out_desc.bEndpointAddress = fs_out_desc.bEndpointAddress;
+	ss_notify_desc.bEndpointAddress = fs_notify_desc.bEndpointAddress;
+
+	status = usb_assign_descriptors(f, eth_fs_function, eth_hs_function,
+			eth_ss_function, eth_ss_function);
+	if (status)
+		goto fail;
+
+	rndis->port.open = rndis_open;
+	rndis->port.close = rndis_close;
+
+	rndis_set_param_medium(rndis->params, RNDIS_MEDIUM_802_3, 0);
+	rndis_set_host_mac(rndis->params, rndis->ethaddr);
+
+	if (rndis->manufacturer && rndis->vendorID &&
+			rndis_set_param_vendor(rndis->params, rndis->vendorID,
+					       rndis->manufacturer)) {
+		status = -EINVAL;
+		goto fail_free_descs;
+	}
+
+	/* NOTE:  all that is done without knowing or caring about
+	 * the network link ... which is unavailable to this code
+	 * until we're activated via set_alt().
+	 */
+
+	DBG(cdev, "RNDIS: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+			gadget_is_superspeed(c->cdev->gadget) ? "super" :
+			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+			rndis->port.in_ep->name, rndis->port.out_ep->name,
+			rndis->notify->name);
+	return 0;
+
+fail_free_descs:
+	usb_free_all_descriptors(f);
+fail:
+	kfree(f->os_desc_table);
+	f->os_desc_n = 0;
+
+	if (rndis->notify_req) {
+		kfree(rndis->notify_req->buf);
+		usb_ep_free_request(rndis->notify, rndis->notify_req);
+	}
+
+	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+	return status;
+}
+
+void rndis_borrow_net(struct usb_function_instance *f, struct net_device *net)
+{
+	struct f_rndis_opts *opts;
+
+	opts = container_of(f, struct f_rndis_opts, func_inst);
+	if (opts->bound)
+		gether_cleanup(netdev_priv(opts->net));
+	else
+		free_netdev(opts->net);
+	opts->borrowed_net = opts->bound = true;
+	opts->net = net;
+}
+EXPORT_SYMBOL_GPL(rndis_borrow_net);
+
+static inline struct f_rndis_opts *to_f_rndis_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_rndis_opts,
+			    func_inst.group);
+}
+
+/* f_rndis_item_ops */
+USB_ETHERNET_CONFIGFS_ITEM(rndis);
+
+/* f_rndis_opts_dev_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(rndis);
+
+/* f_rndis_opts_host_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(rndis);
+
+/* f_rndis_opts_qmult */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(rndis);
+
+/* f_rndis_opts_ifname */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(rndis);
+
+/* f_rndis_opts_class */
+USB_ETHER_CONFIGFS_ITEM_ATTR_U8_RW(rndis, class);
+
+/* f_rndis_opts_subclass */
+USB_ETHER_CONFIGFS_ITEM_ATTR_U8_RW(rndis, subclass);
+
+/* f_rndis_opts_protocol */
+USB_ETHER_CONFIGFS_ITEM_ATTR_U8_RW(rndis, protocol);
+
+static struct configfs_attribute *rndis_attrs[] = {
+	&rndis_opts_attr_dev_addr,
+	&rndis_opts_attr_host_addr,
+	&rndis_opts_attr_qmult,
+	&rndis_opts_attr_ifname,
+	&rndis_opts_attr_class,
+	&rndis_opts_attr_subclass,
+	&rndis_opts_attr_protocol,
+	NULL,
+};
+
+static const struct config_item_type rndis_func_type = {
+	.ct_item_ops	= &rndis_item_ops,
+	.ct_attrs	= rndis_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void rndis_free_inst(struct usb_function_instance *f)
+{
+	struct f_rndis_opts *opts;
+
+	opts = container_of(f, struct f_rndis_opts, func_inst);
+	if (!opts->borrowed_net) {
+		if (opts->bound)
+			gether_cleanup(netdev_priv(opts->net));
+		else
+			free_netdev(opts->net);
+	}
+
+	kfree(opts->rndis_interf_group);	/* single VLA chunk */
+	kfree(opts);
+}
+
+static struct usb_function_instance *rndis_alloc_inst(void)
+{
+	struct f_rndis_opts *opts;
+	struct usb_os_desc *descs[1];
+	char *names[1];
+	struct config_group *rndis_interf_group;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+	opts->rndis_os_desc.ext_compat_id = opts->rndis_ext_compat_id;
+
+	mutex_init(&opts->lock);
+	opts->func_inst.free_func_inst = rndis_free_inst;
+	opts->net = gether_setup_default();
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
+	INIT_LIST_HEAD(&opts->rndis_os_desc.ext_prop);
+
+	opts->class = rndis_iad_descriptor.bFunctionClass;
+	opts->subclass = rndis_iad_descriptor.bFunctionSubClass;
+	opts->protocol = rndis_iad_descriptor.bFunctionProtocol;
+
+	descs[0] = &opts->rndis_os_desc;
+	names[0] = "rndis";
+	config_group_init_type_name(&opts->func_inst.group, "",
+				    &rndis_func_type);
+	rndis_interf_group =
+		usb_os_desc_prepare_interf_dir(&opts->func_inst.group, 1, descs,
+					       names, THIS_MODULE);
+	if (IS_ERR(rndis_interf_group)) {
+		rndis_free_inst(&opts->func_inst);
+		return ERR_CAST(rndis_interf_group);
+	}
+	opts->rndis_interf_group = rndis_interf_group;
+
+	return &opts->func_inst;
+}
+
+static void rndis_free(struct usb_function *f)
+{
+	struct f_rndis *rndis;
+	struct f_rndis_opts *opts;
+
+	rndis = func_to_rndis(f);
+	rndis_deregister(rndis->params);
+	opts = container_of(f->fi, struct f_rndis_opts, func_inst);
+	kfree(rndis);
+	mutex_lock(&opts->lock);
+	opts->refcnt--;
+	mutex_unlock(&opts->lock);
+}
+
+static void rndis_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_rndis		*rndis = func_to_rndis(f);
+
+	kfree(f->os_desc_table);
+	f->os_desc_n = 0;
+	usb_free_all_descriptors(f);
+
+	kfree(rndis->notify_req->buf);
+	usb_ep_free_request(rndis->notify, rndis->notify_req);
+}
+
+static struct usb_function *rndis_alloc(struct usb_function_instance *fi)
+{
+	struct f_rndis	*rndis;
+	struct f_rndis_opts *opts;
+	struct rndis_params *params;
+
+	/* allocate and initialize one new instance */
+	rndis = kzalloc(sizeof(*rndis), GFP_KERNEL);
+	if (!rndis)
+		return ERR_PTR(-ENOMEM);
+
+	opts = container_of(fi, struct f_rndis_opts, func_inst);
+	mutex_lock(&opts->lock);
+	opts->refcnt++;
+
+	gether_get_host_addr_u8(opts->net, rndis->ethaddr);
+	rndis->vendorID = opts->vendor_id;
+	rndis->manufacturer = opts->manufacturer;
+
+	rndis->port.ioport = netdev_priv(opts->net);
+	mutex_unlock(&opts->lock);
+	/* RNDIS activates when the host changes this filter */
+	rndis->port.cdc_filter = 0;
+
+	/* RNDIS has special (and complex) framing */
+	rndis->port.header_len = sizeof(struct rndis_packet_msg_type);
+	rndis->port.wrap = rndis_add_header;
+	rndis->port.unwrap = rndis_rm_hdr;
+
+	rndis->port.func.name = "rndis";
+	/* descriptors are per-instance copies */
+	rndis->port.func.bind = rndis_bind;
+	rndis->port.func.unbind = rndis_unbind;
+	rndis->port.func.set_alt = rndis_set_alt;
+	rndis->port.func.setup = rndis_setup;
+	rndis->port.func.disable = rndis_disable;
+	rndis->port.func.free_func = rndis_free;
+
+	params = rndis_register(rndis_response_available, rndis);
+	if (IS_ERR(params)) {
+		kfree(rndis);
+		return ERR_CAST(params);
+	}
+	rndis->params = params;
+
+	return &rndis->port.func;
+}
+
+DECLARE_USB_FUNCTION_INIT(rndis, rndis_alloc_inst, rndis_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");
diff --git a/drivers/usb/gadget/function/f_serial.c b/drivers/usb/gadget/function/f_serial.c
new file mode 100644
index 000000000..a9480b9e3
--- /dev/null
+++ b/drivers/usb/gadget/function/f_serial.c
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_serial.c - generic USB serial function driver
+ *
+ * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
+ * Copyright (C) 2008 by David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+
+#include "u_serial.h"
+
+
+/*
+ * This function packages a simple "generic serial" port with no real
+ * control mechanisms, just raw data transfer over two bulk endpoints.
+ *
+ * Because it's not standardized, this isn't as interoperable as the
+ * CDC ACM driver.  However, for many purposes it's just as functional
+ * if you can arrange appropriate host side drivers.
+ */
+
+struct f_gser {
+	struct gserial			port;
+	u8				data_id;
+	u8				port_num;
+};
+
+static inline struct f_gser *func_to_gser(struct usb_function *f)
+{
+	return container_of(f, struct f_gser, port.func);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* interface descriptor: */
+
+static struct usb_interface_descriptor gser_interface_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	/* .bInterfaceNumber = DYNAMIC */
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_VENDOR_SPEC,
+	.bInterfaceSubClass =	0,
+	.bInterfaceProtocol =	0,
+	/* .iInterface = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor gser_fs_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor gser_fs_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *gser_fs_function[] = {
+	(struct usb_descriptor_header *) &gser_interface_desc,
+	(struct usb_descriptor_header *) &gser_fs_in_desc,
+	(struct usb_descriptor_header *) &gser_fs_out_desc,
+	NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor gser_hs_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor gser_hs_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *gser_hs_function[] = {
+	(struct usb_descriptor_header *) &gser_interface_desc,
+	(struct usb_descriptor_header *) &gser_hs_in_desc,
+	(struct usb_descriptor_header *) &gser_hs_out_desc,
+	NULL,
+};
+
+static struct usb_endpoint_descriptor gser_ss_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor gser_ss_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor gser_ss_bulk_comp_desc = {
+	.bLength =              sizeof gser_ss_bulk_comp_desc,
+	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_descriptor_header *gser_ss_function[] = {
+	(struct usb_descriptor_header *) &gser_interface_desc,
+	(struct usb_descriptor_header *) &gser_ss_in_desc,
+	(struct usb_descriptor_header *) &gser_ss_bulk_comp_desc,
+	(struct usb_descriptor_header *) &gser_ss_out_desc,
+	(struct usb_descriptor_header *) &gser_ss_bulk_comp_desc,
+	NULL,
+};
+
+/* string descriptors: */
+
+static struct usb_string gser_string_defs[] = {
+	[0].s = "Generic Serial",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings gser_string_table = {
+	.language =		0x0409,	/* en-us */
+	.strings =		gser_string_defs,
+};
+
+static struct usb_gadget_strings *gser_strings[] = {
+	&gser_string_table,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_gser		*gser = func_to_gser(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	/* we know alt == 0, so this is an activation or a reset */
+
+	if (gser->port.in->enabled) {
+		dev_dbg(&cdev->gadget->dev,
+			"reset generic ttyGS%d\n", gser->port_num);
+		gserial_disconnect(&gser->port);
+	}
+	if (!gser->port.in->desc || !gser->port.out->desc) {
+		dev_dbg(&cdev->gadget->dev,
+			"activate generic ttyGS%d\n", gser->port_num);
+		if (config_ep_by_speed(cdev->gadget, f, gser->port.in) ||
+		    config_ep_by_speed(cdev->gadget, f, gser->port.out)) {
+			gser->port.in->desc = NULL;
+			gser->port.out->desc = NULL;
+			return -EINVAL;
+		}
+	}
+	gserial_connect(&gser->port, gser->port_num);
+	return 0;
+}
+
+static void gser_disable(struct usb_function *f)
+{
+	struct f_gser	*gser = func_to_gser(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	dev_dbg(&cdev->gadget->dev,
+		"generic ttyGS%d deactivated\n", gser->port_num);
+	gserial_disconnect(&gser->port);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* serial function driver setup/binding */
+
+static int gser_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_gser		*gser = func_to_gser(f);
+	int			status;
+	struct usb_ep		*ep;
+
+	/* REVISIT might want instance-specific strings to help
+	 * distinguish instances ...
+	 */
+
+	/* maybe allocate device-global string ID */
+	if (gser_string_defs[0].id == 0) {
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		gser_string_defs[0].id = status;
+	}
+
+	/* allocate instance-specific interface IDs */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	gser->data_id = status;
+	gser_interface_desc.bInterfaceNumber = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	ep = usb_ep_autoconfig(cdev->gadget, &gser_fs_in_desc);
+	if (!ep)
+		goto fail;
+	gser->port.in = ep;
+
+	ep = usb_ep_autoconfig(cdev->gadget, &gser_fs_out_desc);
+	if (!ep)
+		goto fail;
+	gser->port.out = ep;
+
+	/* support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+	gser_hs_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress;
+	gser_hs_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
+
+	gser_ss_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress;
+	gser_ss_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
+
+	status = usb_assign_descriptors(f, gser_fs_function, gser_hs_function,
+			gser_ss_function, gser_ss_function);
+	if (status)
+		goto fail;
+	dev_dbg(&cdev->gadget->dev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
+		gser->port_num,
+		gadget_is_superspeed(c->cdev->gadget) ? "super" :
+		gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+		gser->port.in->name, gser->port.out->name);
+	return 0;
+
+fail:
+	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+	return status;
+}
+
+static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_serial_opts,
+			    func_inst.group);
+}
+
+static void serial_attr_release(struct config_item *item)
+{
+	struct f_serial_opts *opts = to_f_serial_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations serial_item_ops = {
+	.release	= serial_attr_release,
+};
+
+#ifdef CONFIG_U_SERIAL_CONSOLE
+
+static ssize_t f_serial_console_store(struct config_item *item,
+		const char *page, size_t count)
+{
+	return gserial_set_console(to_f_serial_opts(item)->port_num,
+				   page, count);
+}
+
+static ssize_t f_serial_console_show(struct config_item *item, char *page)
+{
+	return gserial_get_console(to_f_serial_opts(item)->port_num, page);
+}
+
+CONFIGFS_ATTR(f_serial_, console);
+
+#endif /* CONFIG_U_SERIAL_CONSOLE */
+
+static ssize_t f_serial_port_num_show(struct config_item *item, char *page)
+{
+	return sprintf(page, "%u\n", to_f_serial_opts(item)->port_num);
+}
+
+CONFIGFS_ATTR_RO(f_serial_, port_num);
+
+static struct configfs_attribute *acm_attrs[] = {
+#ifdef CONFIG_U_SERIAL_CONSOLE
+	&f_serial_attr_console,
+#endif
+	&f_serial_attr_port_num,
+	NULL,
+};
+
+static const struct config_item_type serial_func_type = {
+	.ct_item_ops	= &serial_item_ops,
+	.ct_attrs	= acm_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void gser_free_inst(struct usb_function_instance *f)
+{
+	struct f_serial_opts *opts;
+
+	opts = container_of(f, struct f_serial_opts, func_inst);
+	gserial_free_line(opts->port_num);
+	kfree(opts);
+}
+
+static struct usb_function_instance *gser_alloc_inst(void)
+{
+	struct f_serial_opts *opts;
+	int ret;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+
+	opts->func_inst.free_func_inst = gser_free_inst;
+	ret = gserial_alloc_line(&opts->port_num);
+	if (ret) {
+		kfree(opts);
+		return ERR_PTR(ret);
+	}
+	config_group_init_type_name(&opts->func_inst.group, "",
+				    &serial_func_type);
+
+	return &opts->func_inst;
+}
+
+static void gser_free(struct usb_function *f)
+{
+	struct f_gser *serial;
+
+	serial = func_to_gser(f);
+	kfree(serial);
+}
+
+static void gser_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_gser	*gser = func_to_gser(f);
+
+	/* Ensure port is disconnected before unbinding */
+	gserial_disconnect(&gser->port);
+	usb_free_all_descriptors(f);
+}
+
+static void gser_resume(struct usb_function *f)
+{
+	struct f_gser *gser = func_to_gser(f);
+
+	gserial_resume(&gser->port);
+}
+
+static void gser_suspend(struct usb_function *f)
+{
+	struct f_gser *gser = func_to_gser(f);
+
+	gserial_suspend(&gser->port);
+}
+
+static struct usb_function *gser_alloc(struct usb_function_instance *fi)
+{
+	struct f_gser	*gser;
+	struct f_serial_opts *opts;
+
+	/* allocate and initialize one new instance */
+	gser = kzalloc(sizeof(*gser), GFP_KERNEL);
+	if (!gser)
+		return ERR_PTR(-ENOMEM);
+
+	opts = container_of(fi, struct f_serial_opts, func_inst);
+
+	gser->port_num = opts->port_num;
+
+	gser->port.func.name = "gser";
+	gser->port.func.strings = gser_strings;
+	gser->port.func.bind = gser_bind;
+	gser->port.func.unbind = gser_unbind;
+	gser->port.func.set_alt = gser_set_alt;
+	gser->port.func.disable = gser_disable;
+	gser->port.func.free_func = gser_free;
+	gser->port.func.resume = gser_resume;
+	gser->port.func.suspend = gser_suspend;
+
+	return &gser->port.func;
+}
+
+DECLARE_USB_FUNCTION_INIT(gser, gser_alloc_inst, gser_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Al Borchers");
+MODULE_AUTHOR("David Brownell");
diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c
new file mode 100644
index 000000000..6803cd60c
--- /dev/null
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -0,0 +1,1289 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_sourcesink.c - USB peripheral source/sink configuration driver
+ *
+ * Copyright (C) 2003-2008 David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/usb/composite.h>
+#include <linux/err.h>
+
+#include "g_zero.h"
+#include "u_f.h"
+
+/*
+ * SOURCE/SINK FUNCTION ... a primary testing vehicle for USB peripheral
+ * controller drivers.
+ *
+ * This just sinks bulk packets OUT to the peripheral and sources them IN
+ * to the host, optionally with specific data patterns for integrity tests.
+ * As such it supports basic functionality and load tests.
+ *
+ * In terms of control messaging, this supports all the standard requests
+ * plus two that support control-OUT tests.  If the optional "autoresume"
+ * mode is enabled, it provides good functional coverage for the "USBCV"
+ * test harness from USB-IF.
+ */
+struct f_sourcesink {
+	struct usb_function	function;
+
+	struct usb_ep		*in_ep;
+	struct usb_ep		*out_ep;
+	struct usb_ep		*iso_in_ep;
+	struct usb_ep		*iso_out_ep;
+	int			cur_alt;
+
+	unsigned pattern;
+	unsigned isoc_interval;
+	unsigned isoc_maxpacket;
+	unsigned isoc_mult;
+	unsigned isoc_maxburst;
+	unsigned buflen;
+	unsigned bulk_qlen;
+	unsigned iso_qlen;
+};
+
+static inline struct f_sourcesink *func_to_ss(struct usb_function *f)
+{
+	return container_of(f, struct f_sourcesink, function);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_interface_descriptor source_sink_intf_alt0 = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bAlternateSetting =	0,
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_VENDOR_SPEC,
+	/* .iInterface		= DYNAMIC */
+};
+
+static struct usb_interface_descriptor source_sink_intf_alt1 = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bAlternateSetting =	1,
+	.bNumEndpoints =	4,
+	.bInterfaceClass =	USB_CLASS_VENDOR_SPEC,
+	/* .iInterface		= DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor fs_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor fs_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor fs_iso_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize =	cpu_to_le16(1023),
+	.bInterval =		4,
+};
+
+static struct usb_endpoint_descriptor fs_iso_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize =	cpu_to_le16(1023),
+	.bInterval =		4,
+};
+
+static struct usb_descriptor_header *fs_source_sink_descs[] = {
+	(struct usb_descriptor_header *) &source_sink_intf_alt0,
+	(struct usb_descriptor_header *) &fs_sink_desc,
+	(struct usb_descriptor_header *) &fs_source_desc,
+	(struct usb_descriptor_header *) &source_sink_intf_alt1,
+#define FS_ALT_IFC_1_OFFSET	3
+	(struct usb_descriptor_header *) &fs_sink_desc,
+	(struct usb_descriptor_header *) &fs_source_desc,
+	(struct usb_descriptor_header *) &fs_iso_sink_desc,
+	(struct usb_descriptor_header *) &fs_iso_source_desc,
+	NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor hs_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor hs_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor hs_iso_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+	.bInterval =		4,
+};
+
+static struct usb_endpoint_descriptor hs_iso_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+	.bInterval =		4,
+};
+
+static struct usb_descriptor_header *hs_source_sink_descs[] = {
+	(struct usb_descriptor_header *) &source_sink_intf_alt0,
+	(struct usb_descriptor_header *) &hs_source_desc,
+	(struct usb_descriptor_header *) &hs_sink_desc,
+	(struct usb_descriptor_header *) &source_sink_intf_alt1,
+#define HS_ALT_IFC_1_OFFSET	3
+	(struct usb_descriptor_header *) &hs_source_desc,
+	(struct usb_descriptor_header *) &hs_sink_desc,
+	(struct usb_descriptor_header *) &hs_iso_source_desc,
+	(struct usb_descriptor_header *) &hs_iso_sink_desc,
+	NULL,
+};
+
+/* super speed support: */
+
+static struct usb_endpoint_descriptor ss_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_source_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	0,
+};
+
+static struct usb_endpoint_descriptor ss_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_sink_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	0,
+};
+
+static struct usb_endpoint_descriptor ss_iso_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+	.bInterval =		4,
+};
+
+static struct usb_ss_ep_comp_descriptor ss_iso_source_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor ss_iso_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+	.bInterval =		4,
+};
+
+static struct usb_ss_ep_comp_descriptor ss_iso_sink_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	cpu_to_le16(1024),
+};
+
+static struct usb_descriptor_header *ss_source_sink_descs[] = {
+	(struct usb_descriptor_header *) &source_sink_intf_alt0,
+	(struct usb_descriptor_header *) &ss_source_desc,
+	(struct usb_descriptor_header *) &ss_source_comp_desc,
+	(struct usb_descriptor_header *) &ss_sink_desc,
+	(struct usb_descriptor_header *) &ss_sink_comp_desc,
+	(struct usb_descriptor_header *) &source_sink_intf_alt1,
+#define SS_ALT_IFC_1_OFFSET	5
+	(struct usb_descriptor_header *) &ss_source_desc,
+	(struct usb_descriptor_header *) &ss_source_comp_desc,
+	(struct usb_descriptor_header *) &ss_sink_desc,
+	(struct usb_descriptor_header *) &ss_sink_comp_desc,
+	(struct usb_descriptor_header *) &ss_iso_source_desc,
+	(struct usb_descriptor_header *) &ss_iso_source_comp_desc,
+	(struct usb_descriptor_header *) &ss_iso_sink_desc,
+	(struct usb_descriptor_header *) &ss_iso_sink_comp_desc,
+	NULL,
+};
+
+/* function-specific strings: */
+
+static struct usb_string strings_sourcesink[] = {
+	[0].s = "source and sink data",
+	{  }			/* end of list */
+};
+
+static struct usb_gadget_strings stringtab_sourcesink = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_sourcesink,
+};
+
+static struct usb_gadget_strings *sourcesink_strings[] = {
+	&stringtab_sourcesink,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static inline struct usb_request *ss_alloc_ep_req(struct usb_ep *ep, int len)
+{
+	return alloc_ep_req(ep, len);
+}
+
+static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep)
+{
+	int			value;
+
+	value = usb_ep_disable(ep);
+	if (value < 0)
+		DBG(cdev, "disable %s --> %d\n", ep->name, value);
+}
+
+void disable_endpoints(struct usb_composite_dev *cdev,
+		struct usb_ep *in, struct usb_ep *out,
+		struct usb_ep *iso_in, struct usb_ep *iso_out)
+{
+	disable_ep(cdev, in);
+	disable_ep(cdev, out);
+	if (iso_in)
+		disable_ep(cdev, iso_in);
+	if (iso_out)
+		disable_ep(cdev, iso_out);
+}
+
+static int
+sourcesink_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_sourcesink	*ss = func_to_ss(f);
+	int	id;
+	int ret;
+
+	/* allocate interface ID(s) */
+	id = usb_interface_id(c, f);
+	if (id < 0)
+		return id;
+	source_sink_intf_alt0.bInterfaceNumber = id;
+	source_sink_intf_alt1.bInterfaceNumber = id;
+
+	/* allocate bulk endpoints */
+	ss->in_ep = usb_ep_autoconfig(cdev->gadget, &fs_source_desc);
+	if (!ss->in_ep) {
+autoconf_fail:
+		ERROR(cdev, "%s: can't autoconfigure on %s\n",
+			f->name, cdev->gadget->name);
+		return -ENODEV;
+	}
+
+	ss->out_ep = usb_ep_autoconfig(cdev->gadget, &fs_sink_desc);
+	if (!ss->out_ep)
+		goto autoconf_fail;
+
+	/* sanity check the isoc module parameters */
+	if (ss->isoc_interval < 1)
+		ss->isoc_interval = 1;
+	if (ss->isoc_interval > 16)
+		ss->isoc_interval = 16;
+	if (ss->isoc_mult > 2)
+		ss->isoc_mult = 2;
+	if (ss->isoc_maxburst > 15)
+		ss->isoc_maxburst = 15;
+
+	/* fill in the FS isoc descriptors from the module parameters */
+	fs_iso_source_desc.wMaxPacketSize = ss->isoc_maxpacket > 1023 ?
+						1023 : ss->isoc_maxpacket;
+	fs_iso_source_desc.bInterval = ss->isoc_interval;
+	fs_iso_sink_desc.wMaxPacketSize = ss->isoc_maxpacket > 1023 ?
+						1023 : ss->isoc_maxpacket;
+	fs_iso_sink_desc.bInterval = ss->isoc_interval;
+
+	/* allocate iso endpoints */
+	ss->iso_in_ep = usb_ep_autoconfig(cdev->gadget, &fs_iso_source_desc);
+	if (!ss->iso_in_ep)
+		goto no_iso;
+
+	ss->iso_out_ep = usb_ep_autoconfig(cdev->gadget, &fs_iso_sink_desc);
+	if (!ss->iso_out_ep) {
+		usb_ep_autoconfig_release(ss->iso_in_ep);
+		ss->iso_in_ep = NULL;
+no_iso:
+		/*
+		 * We still want to work even if the UDC doesn't have isoc
+		 * endpoints, so null out the alt interface that contains
+		 * them and continue.
+		 */
+		fs_source_sink_descs[FS_ALT_IFC_1_OFFSET] = NULL;
+		hs_source_sink_descs[HS_ALT_IFC_1_OFFSET] = NULL;
+		ss_source_sink_descs[SS_ALT_IFC_1_OFFSET] = NULL;
+	}
+
+	if (ss->isoc_maxpacket > 1024)
+		ss->isoc_maxpacket = 1024;
+
+	/* support high speed hardware */
+	hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
+	hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
+
+	/*
+	 * Fill in the HS isoc descriptors from the module parameters.
+	 * We assume that the user knows what they are doing and won't
+	 * give parameters that their UDC doesn't support.
+	 */
+	hs_iso_source_desc.wMaxPacketSize = ss->isoc_maxpacket;
+	hs_iso_source_desc.wMaxPacketSize |= ss->isoc_mult << 11;
+	hs_iso_source_desc.bInterval = ss->isoc_interval;
+	hs_iso_source_desc.bEndpointAddress =
+		fs_iso_source_desc.bEndpointAddress;
+
+	hs_iso_sink_desc.wMaxPacketSize = ss->isoc_maxpacket;
+	hs_iso_sink_desc.wMaxPacketSize |= ss->isoc_mult << 11;
+	hs_iso_sink_desc.bInterval = ss->isoc_interval;
+	hs_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress;
+
+	/* support super speed hardware */
+	ss_source_desc.bEndpointAddress =
+		fs_source_desc.bEndpointAddress;
+	ss_sink_desc.bEndpointAddress =
+		fs_sink_desc.bEndpointAddress;
+
+	/*
+	 * Fill in the SS isoc descriptors from the module parameters.
+	 * We assume that the user knows what they are doing and won't
+	 * give parameters that their UDC doesn't support.
+	 */
+	ss_iso_source_desc.wMaxPacketSize = ss->isoc_maxpacket;
+	ss_iso_source_desc.bInterval = ss->isoc_interval;
+	ss_iso_source_comp_desc.bmAttributes = ss->isoc_mult;
+	ss_iso_source_comp_desc.bMaxBurst = ss->isoc_maxburst;
+	ss_iso_source_comp_desc.wBytesPerInterval = ss->isoc_maxpacket *
+		(ss->isoc_mult + 1) * (ss->isoc_maxburst + 1);
+	ss_iso_source_desc.bEndpointAddress =
+		fs_iso_source_desc.bEndpointAddress;
+
+	ss_iso_sink_desc.wMaxPacketSize = ss->isoc_maxpacket;
+	ss_iso_sink_desc.bInterval = ss->isoc_interval;
+	ss_iso_sink_comp_desc.bmAttributes = ss->isoc_mult;
+	ss_iso_sink_comp_desc.bMaxBurst = ss->isoc_maxburst;
+	ss_iso_sink_comp_desc.wBytesPerInterval = ss->isoc_maxpacket *
+		(ss->isoc_mult + 1) * (ss->isoc_maxburst + 1);
+	ss_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress;
+
+	ret = usb_assign_descriptors(f, fs_source_sink_descs,
+			hs_source_sink_descs, ss_source_sink_descs,
+			ss_source_sink_descs);
+	if (ret)
+		return ret;
+
+	DBG(cdev, "%s speed %s: IN/%s, OUT/%s, ISO-IN/%s, ISO-OUT/%s\n",
+	    (gadget_is_superspeed(c->cdev->gadget) ? "super" :
+	     (gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full")),
+			f->name, ss->in_ep->name, ss->out_ep->name,
+			ss->iso_in_ep ? ss->iso_in_ep->name : "<none>",
+			ss->iso_out_ep ? ss->iso_out_ep->name : "<none>");
+	return 0;
+}
+
+static void
+sourcesink_free_func(struct usb_function *f)
+{
+	struct f_ss_opts *opts;
+
+	opts = container_of(f->fi, struct f_ss_opts, func_inst);
+
+	mutex_lock(&opts->lock);
+	opts->refcnt--;
+	mutex_unlock(&opts->lock);
+
+	usb_free_all_descriptors(f);
+	kfree(func_to_ss(f));
+}
+
+/* optionally require specific source/sink data patterns  */
+static int check_read_data(struct f_sourcesink *ss, struct usb_request *req)
+{
+	unsigned		i;
+	u8			*buf = req->buf;
+	struct usb_composite_dev *cdev = ss->function.config->cdev;
+	int max_packet_size = le16_to_cpu(ss->out_ep->desc->wMaxPacketSize);
+
+	if (ss->pattern == 2)
+		return 0;
+
+	for (i = 0; i < req->actual; i++, buf++) {
+		switch (ss->pattern) {
+
+		/* all-zeroes has no synchronization issues */
+		case 0:
+			if (*buf == 0)
+				continue;
+			break;
+
+		/* "mod63" stays in sync with short-terminated transfers,
+		 * OR otherwise when host and gadget agree on how large
+		 * each usb transfer request should be.  Resync is done
+		 * with set_interface or set_config.  (We *WANT* it to
+		 * get quickly out of sync if controllers or their drivers
+		 * stutter for any reason, including buffer duplication...)
+		 */
+		case 1:
+			if (*buf == (u8)((i % max_packet_size) % 63))
+				continue;
+			break;
+		}
+		ERROR(cdev, "bad OUT byte, buf[%d] = %d\n", i, *buf);
+		usb_ep_set_halt(ss->out_ep);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void reinit_write_data(struct usb_ep *ep, struct usb_request *req)
+{
+	unsigned	i;
+	u8		*buf = req->buf;
+	int max_packet_size = le16_to_cpu(ep->desc->wMaxPacketSize);
+	struct f_sourcesink *ss = ep->driver_data;
+
+	switch (ss->pattern) {
+	case 0:
+		memset(req->buf, 0, req->length);
+		break;
+	case 1:
+		for  (i = 0; i < req->length; i++)
+			*buf++ = (u8) ((i % max_packet_size) % 63);
+		break;
+	case 2:
+		break;
+	}
+}
+
+static void source_sink_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct usb_composite_dev	*cdev;
+	struct f_sourcesink		*ss = ep->driver_data;
+	int				status = req->status;
+
+	/* driver_data will be null if ep has been disabled */
+	if (!ss)
+		return;
+
+	cdev = ss->function.config->cdev;
+
+	switch (status) {
+
+	case 0:				/* normal completion? */
+		if (ep == ss->out_ep) {
+			check_read_data(ss, req);
+			if (ss->pattern != 2)
+				memset(req->buf, 0x55, req->length);
+		}
+		break;
+
+	/* this endpoint is normally active while we're configured */
+	case -ECONNABORTED:		/* hardware forced ep reset */
+	case -ECONNRESET:		/* request dequeued */
+	case -ESHUTDOWN:		/* disconnect from host */
+		VDBG(cdev, "%s gone (%d), %d/%d\n", ep->name, status,
+				req->actual, req->length);
+		if (ep == ss->out_ep)
+			check_read_data(ss, req);
+		free_ep_req(ep, req);
+		return;
+
+	case -EOVERFLOW:		/* buffer overrun on read means that
+					 * we didn't provide a big enough
+					 * buffer.
+					 */
+	default:
+#if 1
+		DBG(cdev, "%s complete --> %d, %d/%d\n", ep->name,
+				status, req->actual, req->length);
+		break;
+#endif
+	case -EREMOTEIO:		/* short read */
+		break;
+	}
+
+	status = usb_ep_queue(ep, req, GFP_ATOMIC);
+	if (status) {
+		ERROR(cdev, "kill %s:  resubmit %d bytes --> %d\n",
+				ep->name, req->length, status);
+		usb_ep_set_halt(ep);
+		/* FIXME recover later ... somehow */
+	}
+}
+
+static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in,
+		bool is_iso, int speed)
+{
+	struct usb_ep		*ep;
+	struct usb_request	*req;
+	int			i, size, qlen, status = 0;
+
+	if (is_iso) {
+		switch (speed) {
+		case USB_SPEED_SUPER_PLUS:
+		case USB_SPEED_SUPER:
+			size = ss->isoc_maxpacket *
+					(ss->isoc_mult + 1) *
+					(ss->isoc_maxburst + 1);
+			break;
+		case USB_SPEED_HIGH:
+			size = ss->isoc_maxpacket * (ss->isoc_mult + 1);
+			break;
+		default:
+			size = ss->isoc_maxpacket > 1023 ?
+					1023 : ss->isoc_maxpacket;
+			break;
+		}
+		ep = is_in ? ss->iso_in_ep : ss->iso_out_ep;
+		qlen = ss->iso_qlen;
+	} else {
+		ep = is_in ? ss->in_ep : ss->out_ep;
+		qlen = ss->bulk_qlen;
+		size = ss->buflen;
+	}
+
+	for (i = 0; i < qlen; i++) {
+		req = ss_alloc_ep_req(ep, size);
+		if (!req)
+			return -ENOMEM;
+
+		req->complete = source_sink_complete;
+		if (is_in)
+			reinit_write_data(ep, req);
+		else if (ss->pattern != 2)
+			memset(req->buf, 0x55, req->length);
+
+		status = usb_ep_queue(ep, req, GFP_ATOMIC);
+		if (status) {
+			struct usb_composite_dev	*cdev;
+
+			cdev = ss->function.config->cdev;
+			ERROR(cdev, "start %s%s %s --> %d\n",
+			      is_iso ? "ISO-" : "", is_in ? "IN" : "OUT",
+			      ep->name, status);
+			free_ep_req(ep, req);
+			return status;
+		}
+	}
+
+	return status;
+}
+
+static void disable_source_sink(struct f_sourcesink *ss)
+{
+	struct usb_composite_dev	*cdev;
+
+	cdev = ss->function.config->cdev;
+	disable_endpoints(cdev, ss->in_ep, ss->out_ep, ss->iso_in_ep,
+			ss->iso_out_ep);
+	VDBG(cdev, "%s disabled\n", ss->function.name);
+}
+
+static int
+enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss,
+		int alt)
+{
+	int					result = 0;
+	int					speed = cdev->gadget->speed;
+	struct usb_ep				*ep;
+
+	/* one bulk endpoint writes (sources) zeroes IN (to the host) */
+	ep = ss->in_ep;
+	result = config_ep_by_speed(cdev->gadget, &(ss->function), ep);
+	if (result)
+		return result;
+	result = usb_ep_enable(ep);
+	if (result < 0)
+		return result;
+	ep->driver_data = ss;
+
+	result = source_sink_start_ep(ss, true, false, speed);
+	if (result < 0) {
+fail:
+		ep = ss->in_ep;
+		usb_ep_disable(ep);
+		return result;
+	}
+
+	/* one bulk endpoint reads (sinks) anything OUT (from the host) */
+	ep = ss->out_ep;
+	result = config_ep_by_speed(cdev->gadget, &(ss->function), ep);
+	if (result)
+		goto fail;
+	result = usb_ep_enable(ep);
+	if (result < 0)
+		goto fail;
+	ep->driver_data = ss;
+
+	result = source_sink_start_ep(ss, false, false, speed);
+	if (result < 0) {
+fail2:
+		ep = ss->out_ep;
+		usb_ep_disable(ep);
+		goto fail;
+	}
+
+	if (alt == 0)
+		goto out;
+
+	/* one iso endpoint writes (sources) zeroes IN (to the host) */
+	ep = ss->iso_in_ep;
+	if (ep) {
+		result = config_ep_by_speed(cdev->gadget, &(ss->function), ep);
+		if (result)
+			goto fail2;
+		result = usb_ep_enable(ep);
+		if (result < 0)
+			goto fail2;
+		ep->driver_data = ss;
+
+		result = source_sink_start_ep(ss, true, true, speed);
+		if (result < 0) {
+fail3:
+			ep = ss->iso_in_ep;
+			if (ep)
+				usb_ep_disable(ep);
+			goto fail2;
+		}
+	}
+
+	/* one iso endpoint reads (sinks) anything OUT (from the host) */
+	ep = ss->iso_out_ep;
+	if (ep) {
+		result = config_ep_by_speed(cdev->gadget, &(ss->function), ep);
+		if (result)
+			goto fail3;
+		result = usb_ep_enable(ep);
+		if (result < 0)
+			goto fail3;
+		ep->driver_data = ss;
+
+		result = source_sink_start_ep(ss, false, true, speed);
+		if (result < 0) {
+			usb_ep_disable(ep);
+			goto fail3;
+		}
+	}
+out:
+	ss->cur_alt = alt;
+
+	DBG(cdev, "%s enabled, alt intf %d\n", ss->function.name, alt);
+	return result;
+}
+
+static int sourcesink_set_alt(struct usb_function *f,
+		unsigned intf, unsigned alt)
+{
+	struct f_sourcesink		*ss = func_to_ss(f);
+	struct usb_composite_dev	*cdev = f->config->cdev;
+
+	disable_source_sink(ss);
+	return enable_source_sink(cdev, ss, alt);
+}
+
+static int sourcesink_get_alt(struct usb_function *f, unsigned intf)
+{
+	struct f_sourcesink		*ss = func_to_ss(f);
+
+	return ss->cur_alt;
+}
+
+static void sourcesink_disable(struct usb_function *f)
+{
+	struct f_sourcesink	*ss = func_to_ss(f);
+
+	disable_source_sink(ss);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int sourcesink_setup(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_configuration        *c = f->config;
+	struct usb_request	*req = c->cdev->req;
+	int			value = -EOPNOTSUPP;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	req->length = USB_COMP_EP0_BUFSIZ;
+
+	/* composite driver infrastructure handles everything except
+	 * the two control test requests.
+	 */
+	switch (ctrl->bRequest) {
+
+	/*
+	 * These are the same vendor-specific requests supported by
+	 * Intel's USB 2.0 compliance test devices.  We exceed that
+	 * device spec by allowing multiple-packet requests.
+	 *
+	 * NOTE:  the Control-OUT data stays in req->buf ... better
+	 * would be copying it into a scratch buffer, so that other
+	 * requests may safely intervene.
+	 */
+	case 0x5b:	/* control WRITE test -- fill the buffer */
+		if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
+			goto unknown;
+		if (w_value || w_index)
+			break;
+		/* just read that many bytes into the buffer */
+		if (w_length > req->length)
+			break;
+		value = w_length;
+		break;
+	case 0x5c:	/* control READ test -- return the buffer */
+		if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
+			goto unknown;
+		if (w_value || w_index)
+			break;
+		/* expect those bytes are still in the buffer; send back */
+		if (w_length > req->length)
+			break;
+		value = w_length;
+		break;
+
+	default:
+unknown:
+		VDBG(c->cdev,
+			"unknown control req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+	}
+
+	/* respond with data transfer or status phase? */
+	if (value >= 0) {
+		VDBG(c->cdev, "source/sink req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+		req->zero = 0;
+		req->length = value;
+		value = usb_ep_queue(c->cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0)
+			ERROR(c->cdev, "source/sink response, err %d\n",
+					value);
+	}
+
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+static struct usb_function *source_sink_alloc_func(
+		struct usb_function_instance *fi)
+{
+	struct f_sourcesink     *ss;
+	struct f_ss_opts	*ss_opts;
+
+	ss = kzalloc(sizeof(*ss), GFP_KERNEL);
+	if (!ss)
+		return ERR_PTR(-ENOMEM);
+
+	ss_opts =  container_of(fi, struct f_ss_opts, func_inst);
+
+	mutex_lock(&ss_opts->lock);
+	ss_opts->refcnt++;
+	mutex_unlock(&ss_opts->lock);
+
+	ss->pattern = ss_opts->pattern;
+	ss->isoc_interval = ss_opts->isoc_interval;
+	ss->isoc_maxpacket = ss_opts->isoc_maxpacket;
+	ss->isoc_mult = ss_opts->isoc_mult;
+	ss->isoc_maxburst = ss_opts->isoc_maxburst;
+	ss->buflen = ss_opts->bulk_buflen;
+	ss->bulk_qlen = ss_opts->bulk_qlen;
+	ss->iso_qlen = ss_opts->iso_qlen;
+
+	ss->function.name = "source/sink";
+	ss->function.bind = sourcesink_bind;
+	ss->function.set_alt = sourcesink_set_alt;
+	ss->function.get_alt = sourcesink_get_alt;
+	ss->function.disable = sourcesink_disable;
+	ss->function.setup = sourcesink_setup;
+	ss->function.strings = sourcesink_strings;
+
+	ss->function.free_func = sourcesink_free_func;
+
+	return &ss->function;
+}
+
+static inline struct f_ss_opts *to_f_ss_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_ss_opts,
+			    func_inst.group);
+}
+
+static void ss_attr_release(struct config_item *item)
+{
+	struct f_ss_opts *ss_opts = to_f_ss_opts(item);
+
+	usb_put_function_instance(&ss_opts->func_inst);
+}
+
+static struct configfs_item_operations ss_item_ops = {
+	.release		= ss_attr_release,
+};
+
+static ssize_t f_ss_opts_pattern_show(struct config_item *item, char *page)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%u\n", opts->pattern);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_pattern_store(struct config_item *item,
+				       const char *page, size_t len)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int ret;
+	u8 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou8(page, 0, &num);
+	if (ret)
+		goto end;
+
+	if (num != 0 && num != 1 && num != 2) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	opts->pattern = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+CONFIGFS_ATTR(f_ss_opts_, pattern);
+
+static ssize_t f_ss_opts_isoc_interval_show(struct config_item *item, char *page)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%u\n", opts->isoc_interval);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_isoc_interval_store(struct config_item *item,
+				       const char *page, size_t len)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int ret;
+	u8 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou8(page, 0, &num);
+	if (ret)
+		goto end;
+
+	if (num > 16) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	opts->isoc_interval = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+CONFIGFS_ATTR(f_ss_opts_, isoc_interval);
+
+static ssize_t f_ss_opts_isoc_maxpacket_show(struct config_item *item, char *page)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%u\n", opts->isoc_maxpacket);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_isoc_maxpacket_store(struct config_item *item,
+				       const char *page, size_t len)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int ret;
+	u16 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou16(page, 0, &num);
+	if (ret)
+		goto end;
+
+	if (num > 1024) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	opts->isoc_maxpacket = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+CONFIGFS_ATTR(f_ss_opts_, isoc_maxpacket);
+
+static ssize_t f_ss_opts_isoc_mult_show(struct config_item *item, char *page)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%u\n", opts->isoc_mult);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_isoc_mult_store(struct config_item *item,
+				       const char *page, size_t len)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int ret;
+	u8 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou8(page, 0, &num);
+	if (ret)
+		goto end;
+
+	if (num > 2) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	opts->isoc_mult = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+CONFIGFS_ATTR(f_ss_opts_, isoc_mult);
+
+static ssize_t f_ss_opts_isoc_maxburst_show(struct config_item *item, char *page)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%u\n", opts->isoc_maxburst);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_isoc_maxburst_store(struct config_item *item,
+				       const char *page, size_t len)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int ret;
+	u8 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou8(page, 0, &num);
+	if (ret)
+		goto end;
+
+	if (num > 15) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	opts->isoc_maxburst = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+CONFIGFS_ATTR(f_ss_opts_, isoc_maxburst);
+
+static ssize_t f_ss_opts_bulk_buflen_show(struct config_item *item, char *page)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%u\n", opts->bulk_buflen);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_bulk_buflen_store(struct config_item *item,
+					   const char *page, size_t len)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int ret;
+	u32 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou32(page, 0, &num);
+	if (ret)
+		goto end;
+
+	opts->bulk_buflen = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+CONFIGFS_ATTR(f_ss_opts_, bulk_buflen);
+
+static ssize_t f_ss_opts_bulk_qlen_show(struct config_item *item, char *page)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%u\n", opts->bulk_qlen);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_bulk_qlen_store(struct config_item *item,
+					   const char *page, size_t len)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int ret;
+	u32 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou32(page, 0, &num);
+	if (ret)
+		goto end;
+
+	opts->bulk_qlen = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+CONFIGFS_ATTR(f_ss_opts_, bulk_qlen);
+
+static ssize_t f_ss_opts_iso_qlen_show(struct config_item *item, char *page)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%u\n", opts->iso_qlen);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_iso_qlen_store(struct config_item *item,
+					   const char *page, size_t len)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int ret;
+	u32 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou32(page, 0, &num);
+	if (ret)
+		goto end;
+
+	opts->iso_qlen = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+CONFIGFS_ATTR(f_ss_opts_, iso_qlen);
+
+static struct configfs_attribute *ss_attrs[] = {
+	&f_ss_opts_attr_pattern,
+	&f_ss_opts_attr_isoc_interval,
+	&f_ss_opts_attr_isoc_maxpacket,
+	&f_ss_opts_attr_isoc_mult,
+	&f_ss_opts_attr_isoc_maxburst,
+	&f_ss_opts_attr_bulk_buflen,
+	&f_ss_opts_attr_bulk_qlen,
+	&f_ss_opts_attr_iso_qlen,
+	NULL,
+};
+
+static const struct config_item_type ss_func_type = {
+	.ct_item_ops    = &ss_item_ops,
+	.ct_attrs	= ss_attrs,
+	.ct_owner       = THIS_MODULE,
+};
+
+static void source_sink_free_instance(struct usb_function_instance *fi)
+{
+	struct f_ss_opts *ss_opts;
+
+	ss_opts = container_of(fi, struct f_ss_opts, func_inst);
+	kfree(ss_opts);
+}
+
+static struct usb_function_instance *source_sink_alloc_inst(void)
+{
+	struct f_ss_opts *ss_opts;
+
+	ss_opts = kzalloc(sizeof(*ss_opts), GFP_KERNEL);
+	if (!ss_opts)
+		return ERR_PTR(-ENOMEM);
+	mutex_init(&ss_opts->lock);
+	ss_opts->func_inst.free_func_inst = source_sink_free_instance;
+	ss_opts->isoc_interval = GZERO_ISOC_INTERVAL;
+	ss_opts->isoc_maxpacket = GZERO_ISOC_MAXPACKET;
+	ss_opts->bulk_buflen = GZERO_BULK_BUFLEN;
+	ss_opts->bulk_qlen = GZERO_SS_BULK_QLEN;
+	ss_opts->iso_qlen = GZERO_SS_ISO_QLEN;
+
+	config_group_init_type_name(&ss_opts->func_inst.group, "",
+				    &ss_func_type);
+
+	return &ss_opts->func_inst;
+}
+DECLARE_USB_FUNCTION(SourceSink, source_sink_alloc_inst,
+		source_sink_alloc_func);
+
+static int __init sslb_modinit(void)
+{
+	int ret;
+
+	ret = usb_function_register(&SourceSinkusb_func);
+	if (ret)
+		return ret;
+	ret = lb_modinit();
+	if (ret)
+		usb_function_unregister(&SourceSinkusb_func);
+	return ret;
+}
+static void __exit sslb_modexit(void)
+{
+	usb_function_unregister(&SourceSinkusb_func);
+	lb_modexit();
+}
+module_init(sslb_modinit);
+module_exit(sslb_modexit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/function/f_subset.c b/drivers/usb/gadget/function/f_subset.c
new file mode 100644
index 000000000..51c1cae16
--- /dev/null
+++ b/drivers/usb/gadget/function/f_subset.c
@@ -0,0 +1,506 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_subset.c -- "CDC Subset" Ethernet link function driver
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+
+#include "u_ether.h"
+#include "u_ether_configfs.h"
+#include "u_gether.h"
+
+/*
+ * This function packages a simple "CDC Subset" Ethernet port with no real
+ * control mechanisms; just raw data transfer over two bulk endpoints.
+ * The data transfer model is exactly that of CDC Ethernet, which is
+ * why we call it the "CDC Subset".
+ *
+ * Because it's not standardized, this has some interoperability issues.
+ * They mostly relate to driver binding, since the data transfer model is
+ * so simple (CDC Ethernet).  The original versions of this protocol used
+ * specific product/vendor IDs:  byteswapped IDs for Digital Equipment's
+ * SA-1100 "Itsy" board, which could run Linux 2.4 kernels and supported
+ * daughtercards with USB peripheral connectors.  (It was used more often
+ * with other boards, using the Itsy identifiers.)  Linux hosts recognized
+ * this with CONFIG_USB_ARMLINUX; these devices have only one configuration
+ * and one interface.
+ *
+ * At some point, MCCI defined a (nonconformant) CDC MDLM variant called
+ * "SAFE", which happens to have a mode which is identical to the "CDC
+ * Subset" in terms of data transfer and lack of control model.  This was
+ * adopted by later Sharp Zaurus models, and by some other software which
+ * Linux hosts recognize with CONFIG_USB_NET_ZAURUS.
+ *
+ * Because Microsoft's RNDIS drivers are far from robust, we added a few
+ * descriptors to the CDC Subset code, making this code look like a SAFE
+ * implementation.  This lets you use MCCI's host side MS-Windows drivers
+ * if you get fed up with RNDIS.  It also makes it easier for composite
+ * drivers to work, since they can use class based binding instead of
+ * caring about specific product and vendor IDs.
+ */
+
+struct f_gether {
+	struct gether			port;
+
+	char				ethaddr[14];
+};
+
+static inline struct f_gether *func_to_geth(struct usb_function *f)
+{
+	return container_of(f, struct f_gether, port.func);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * "Simple" CDC-subset option is a simple vendor-neutral model that most
+ * full speed controllers can handle:  one interface, two bulk endpoints.
+ * To assist host side drivers, we fancy it up a bit, and add descriptors so
+ * some host side drivers will understand it as a "SAFE" variant.
+ *
+ * "SAFE" loosely follows CDC WMC MDLM, violating the spec in various ways.
+ * Data endpoints live in the control interface, there's no data interface.
+ * And it's not used to talk to a cell phone radio.
+ */
+
+/* interface descriptor: */
+
+static struct usb_interface_descriptor subset_data_intf = {
+	.bLength =		sizeof subset_data_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	/* .bInterfaceNumber = DYNAMIC */
+	.bAlternateSetting =	0,
+	.bNumEndpoints =	2,
+	.bInterfaceClass =      USB_CLASS_COMM,
+	.bInterfaceSubClass =	USB_CDC_SUBCLASS_MDLM,
+	.bInterfaceProtocol =	0,
+	/* .iInterface = DYNAMIC */
+};
+
+static struct usb_cdc_header_desc mdlm_header_desc = {
+	.bLength =		sizeof mdlm_header_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
+
+	.bcdCDC =		cpu_to_le16(0x0110),
+};
+
+static struct usb_cdc_mdlm_desc mdlm_desc = {
+	.bLength =		sizeof mdlm_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_MDLM_TYPE,
+
+	.bcdVersion =		cpu_to_le16(0x0100),
+	.bGUID = {
+		0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
+		0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
+	},
+};
+
+/* since "usb_cdc_mdlm_detail_desc" is a variable length structure, we
+ * can't really use its struct.  All we do here is say that we're using
+ * the submode of "SAFE" which directly matches the CDC Subset.
+ */
+static u8 mdlm_detail_desc[] = {
+	6,
+	USB_DT_CS_INTERFACE,
+	USB_CDC_MDLM_DETAIL_TYPE,
+
+	0,	/* "SAFE" */
+	0,	/* network control capabilities (none) */
+	0,	/* network data capabilities ("raw" encapsulation) */
+};
+
+static struct usb_cdc_ether_desc ether_desc = {
+	.bLength =		sizeof ether_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_ETHERNET_TYPE,
+
+	/* this descriptor actually adds value, surprise! */
+	/* .iMACAddress = DYNAMIC */
+	.bmEthernetStatistics =	cpu_to_le32(0), /* no statistics */
+	.wMaxSegmentSize =	cpu_to_le16(ETH_FRAME_LEN),
+	.wNumberMCFilters =	cpu_to_le16(0),
+	.bNumberPowerFilters =	0,
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor fs_subset_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor fs_subset_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *fs_eth_function[] = {
+	(struct usb_descriptor_header *) &subset_data_intf,
+	(struct usb_descriptor_header *) &mdlm_header_desc,
+	(struct usb_descriptor_header *) &mdlm_desc,
+	(struct usb_descriptor_header *) &mdlm_detail_desc,
+	(struct usb_descriptor_header *) &ether_desc,
+	(struct usb_descriptor_header *) &fs_subset_in_desc,
+	(struct usb_descriptor_header *) &fs_subset_out_desc,
+	NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor hs_subset_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor hs_subset_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *hs_eth_function[] = {
+	(struct usb_descriptor_header *) &subset_data_intf,
+	(struct usb_descriptor_header *) &mdlm_header_desc,
+	(struct usb_descriptor_header *) &mdlm_desc,
+	(struct usb_descriptor_header *) &mdlm_detail_desc,
+	(struct usb_descriptor_header *) &ether_desc,
+	(struct usb_descriptor_header *) &hs_subset_in_desc,
+	(struct usb_descriptor_header *) &hs_subset_out_desc,
+	NULL,
+};
+
+/* super speed support: */
+
+static struct usb_endpoint_descriptor ss_subset_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor ss_subset_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_subset_bulk_comp_desc = {
+	.bLength =		sizeof ss_subset_bulk_comp_desc,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 2 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+};
+
+static struct usb_descriptor_header *ss_eth_function[] = {
+	(struct usb_descriptor_header *) &subset_data_intf,
+	(struct usb_descriptor_header *) &mdlm_header_desc,
+	(struct usb_descriptor_header *) &mdlm_desc,
+	(struct usb_descriptor_header *) &mdlm_detail_desc,
+	(struct usb_descriptor_header *) &ether_desc,
+	(struct usb_descriptor_header *) &ss_subset_in_desc,
+	(struct usb_descriptor_header *) &ss_subset_bulk_comp_desc,
+	(struct usb_descriptor_header *) &ss_subset_out_desc,
+	(struct usb_descriptor_header *) &ss_subset_bulk_comp_desc,
+	NULL,
+};
+
+/* string descriptors: */
+
+static struct usb_string geth_string_defs[] = {
+	[0].s = "CDC Ethernet Subset/SAFE",
+	[1].s = "",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings geth_string_table = {
+	.language =		0x0409,	/* en-us */
+	.strings =		geth_string_defs,
+};
+
+static struct usb_gadget_strings *geth_strings[] = {
+	&geth_string_table,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int geth_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_gether		*geth = func_to_geth(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct net_device	*net;
+
+	/* we know alt == 0, so this is an activation or a reset */
+
+	if (geth->port.in_ep->enabled) {
+		DBG(cdev, "reset cdc subset\n");
+		gether_disconnect(&geth->port);
+	}
+
+	DBG(cdev, "init + activate cdc subset\n");
+	if (config_ep_by_speed(cdev->gadget, f, geth->port.in_ep) ||
+	    config_ep_by_speed(cdev->gadget, f, geth->port.out_ep)) {
+		geth->port.in_ep->desc = NULL;
+		geth->port.out_ep->desc = NULL;
+		return -EINVAL;
+	}
+
+	net = gether_connect(&geth->port);
+	return PTR_ERR_OR_ZERO(net);
+}
+
+static void geth_disable(struct usb_function *f)
+{
+	struct f_gether	*geth = func_to_geth(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	DBG(cdev, "net deactivated\n");
+	gether_disconnect(&geth->port);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* serial function driver setup/binding */
+
+static int
+geth_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_gether		*geth = func_to_geth(f);
+	struct usb_string	*us;
+	int			status;
+	struct usb_ep		*ep;
+
+	struct f_gether_opts	*gether_opts;
+
+	gether_opts = container_of(f->fi, struct f_gether_opts, func_inst);
+
+	/*
+	 * in drivers/usb/gadget/configfs.c:configfs_composite_bind()
+	 * configurations are bound in sequence with list_for_each_entry,
+	 * in each configuration its functions are bound in sequence
+	 * with list_for_each_entry, so we assume no race condition
+	 * with regard to gether_opts->bound access
+	 */
+	if (!gether_opts->bound) {
+		mutex_lock(&gether_opts->lock);
+		gether_set_gadget(gether_opts->net, cdev->gadget);
+		status = gether_register_netdev(gether_opts->net);
+		mutex_unlock(&gether_opts->lock);
+		if (status)
+			return status;
+		gether_opts->bound = true;
+	}
+
+	us = usb_gstrings_attach(cdev, geth_strings,
+				 ARRAY_SIZE(geth_string_defs));
+	if (IS_ERR(us))
+		return PTR_ERR(us);
+
+	subset_data_intf.iInterface = us[0].id;
+	ether_desc.iMACAddress = us[1].id;
+
+	/* allocate instance-specific interface IDs */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	subset_data_intf.bInterfaceNumber = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_subset_in_desc);
+	if (!ep)
+		goto fail;
+	geth->port.in_ep = ep;
+
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_subset_out_desc);
+	if (!ep)
+		goto fail;
+	geth->port.out_ep = ep;
+
+	/* support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+	hs_subset_in_desc.bEndpointAddress = fs_subset_in_desc.bEndpointAddress;
+	hs_subset_out_desc.bEndpointAddress =
+		fs_subset_out_desc.bEndpointAddress;
+
+	ss_subset_in_desc.bEndpointAddress = fs_subset_in_desc.bEndpointAddress;
+	ss_subset_out_desc.bEndpointAddress =
+		fs_subset_out_desc.bEndpointAddress;
+
+	status = usb_assign_descriptors(f, fs_eth_function, hs_eth_function,
+			ss_eth_function, ss_eth_function);
+	if (status)
+		goto fail;
+
+	/* NOTE:  all that is done without knowing or caring about
+	 * the network link ... which is unavailable to this code
+	 * until we're activated via set_alt().
+	 */
+
+	DBG(cdev, "CDC Subset: %s speed IN/%s OUT/%s\n",
+			gadget_is_superspeed(c->cdev->gadget) ? "super" :
+			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+			geth->port.in_ep->name, geth->port.out_ep->name);
+	return 0;
+
+fail:
+	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+	return status;
+}
+
+static inline struct f_gether_opts *to_f_gether_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_gether_opts,
+			    func_inst.group);
+}
+
+/* f_gether_item_ops */
+USB_ETHERNET_CONFIGFS_ITEM(gether);
+
+/* f_gether_opts_dev_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(gether);
+
+/* f_gether_opts_host_addr */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(gether);
+
+/* f_gether_opts_qmult */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(gether);
+
+/* f_gether_opts_ifname */
+USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(gether);
+
+static struct configfs_attribute *gether_attrs[] = {
+	&gether_opts_attr_dev_addr,
+	&gether_opts_attr_host_addr,
+	&gether_opts_attr_qmult,
+	&gether_opts_attr_ifname,
+	NULL,
+};
+
+static const struct config_item_type gether_func_type = {
+	.ct_item_ops	= &gether_item_ops,
+	.ct_attrs	= gether_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void geth_free_inst(struct usb_function_instance *f)
+{
+	struct f_gether_opts *opts;
+
+	opts = container_of(f, struct f_gether_opts, func_inst);
+	if (opts->bound)
+		gether_cleanup(netdev_priv(opts->net));
+	else
+		free_netdev(opts->net);
+	kfree(opts);
+}
+
+static struct usb_function_instance *geth_alloc_inst(void)
+{
+	struct f_gether_opts *opts;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+	mutex_init(&opts->lock);
+	opts->func_inst.free_func_inst = geth_free_inst;
+	opts->net = gether_setup_default();
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
+
+	config_group_init_type_name(&opts->func_inst.group, "",
+				    &gether_func_type);
+
+	return &opts->func_inst;
+}
+
+static void geth_free(struct usb_function *f)
+{
+	struct f_gether *eth;
+
+	eth = func_to_geth(f);
+	kfree(eth);
+}
+
+static void geth_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	geth_string_defs[0].id = 0;
+	usb_free_all_descriptors(f);
+}
+
+static struct usb_function *geth_alloc(struct usb_function_instance *fi)
+{
+	struct f_gether	*geth;
+	struct f_gether_opts *opts;
+	int status;
+
+	/* allocate and initialize one new instance */
+	geth = kzalloc(sizeof(*geth), GFP_KERNEL);
+	if (!geth)
+		return ERR_PTR(-ENOMEM);
+
+	opts = container_of(fi, struct f_gether_opts, func_inst);
+
+	mutex_lock(&opts->lock);
+	opts->refcnt++;
+	/* export host's Ethernet address in CDC format */
+	status = gether_get_host_addr_cdc(opts->net, geth->ethaddr,
+					  sizeof(geth->ethaddr));
+	if (status < 12) {
+		kfree(geth);
+		mutex_unlock(&opts->lock);
+		return ERR_PTR(-EINVAL);
+	}
+	geth_string_defs[1].s = geth->ethaddr;
+
+	geth->port.ioport = netdev_priv(opts->net);
+	mutex_unlock(&opts->lock);
+	geth->port.cdc_filter = DEFAULT_FILTER;
+
+	geth->port.func.name = "cdc_subset";
+	geth->port.func.bind = geth_bind;
+	geth->port.func.unbind = geth_unbind;
+	geth->port.func.set_alt = geth_set_alt;
+	geth->port.func.disable = geth_disable;
+	geth->port.func.free_func = geth_free;
+
+	return &geth->port.func;
+}
+
+DECLARE_USB_FUNCTION_INIT(geth, geth_alloc_inst, geth_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");
diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c
new file mode 100644
index 000000000..c21acebe8
--- /dev/null
+++ b/drivers/usb/gadget/function/f_tcm.c
@@ -0,0 +1,2333 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Target based USB-Gadget
+ *
+ * UAS protocol handling, target callbacks, configfs handling,
+ * BBB (USB Mass Storage Class Bulk-Only (BBB) and Transport protocol handling.
+ *
+ * Author: Sebastian Andrzej Siewior <bigeasy at linutronix dot de>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/configfs.h>
+#include <linux/ctype.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/storage.h>
+#include <scsi/scsi_tcq.h>
+#include <target/target_core_base.h>
+#include <target/target_core_fabric.h>
+#include <asm/unaligned.h>
+
+#include "tcm.h"
+#include "u_tcm.h"
+#include "configfs.h"
+
+#define TPG_INSTANCES		1
+
+struct tpg_instance {
+	struct usb_function_instance	*func_inst;
+	struct usbg_tpg			*tpg;
+};
+
+static struct tpg_instance tpg_instances[TPG_INSTANCES];
+
+static DEFINE_MUTEX(tpg_instances_lock);
+
+static inline struct f_uas *to_f_uas(struct usb_function *f)
+{
+	return container_of(f, struct f_uas, function);
+}
+
+/* Start bot.c code */
+
+static int bot_enqueue_cmd_cbw(struct f_uas *fu)
+{
+	int ret;
+
+	if (fu->flags & USBG_BOT_CMD_PEND)
+		return 0;
+
+	ret = usb_ep_queue(fu->ep_out, fu->cmd.req, GFP_ATOMIC);
+	if (!ret)
+		fu->flags |= USBG_BOT_CMD_PEND;
+	return ret;
+}
+
+static void bot_status_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct usbg_cmd *cmd = req->context;
+	struct f_uas *fu = cmd->fu;
+
+	transport_generic_free_cmd(&cmd->se_cmd, 0);
+	if (req->status < 0) {
+		pr_err("ERR %s(%d)\n", __func__, __LINE__);
+		return;
+	}
+
+	/* CSW completed, wait for next CBW */
+	bot_enqueue_cmd_cbw(fu);
+}
+
+static void bot_enqueue_sense_code(struct f_uas *fu, struct usbg_cmd *cmd)
+{
+	struct bulk_cs_wrap *csw = &fu->bot_status.csw;
+	int ret;
+	unsigned int csw_stat;
+
+	csw_stat = cmd->csw_code;
+	csw->Tag = cmd->bot_tag;
+	csw->Status = csw_stat;
+	fu->bot_status.req->context = cmd;
+	ret = usb_ep_queue(fu->ep_in, fu->bot_status.req, GFP_ATOMIC);
+	if (ret)
+		pr_err("%s(%d) ERR: %d\n", __func__, __LINE__, ret);
+}
+
+static void bot_err_compl(struct usb_ep *ep, struct usb_request *req)
+{
+	struct usbg_cmd *cmd = req->context;
+	struct f_uas *fu = cmd->fu;
+
+	if (req->status < 0)
+		pr_err("ERR %s(%d)\n", __func__, __LINE__);
+
+	if (cmd->data_len) {
+		if (cmd->data_len > ep->maxpacket) {
+			req->length = ep->maxpacket;
+			cmd->data_len -= ep->maxpacket;
+		} else {
+			req->length = cmd->data_len;
+			cmd->data_len = 0;
+		}
+
+		usb_ep_queue(ep, req, GFP_ATOMIC);
+		return;
+	}
+	bot_enqueue_sense_code(fu, cmd);
+}
+
+static void bot_send_bad_status(struct usbg_cmd *cmd)
+{
+	struct f_uas *fu = cmd->fu;
+	struct bulk_cs_wrap *csw = &fu->bot_status.csw;
+	struct usb_request *req;
+	struct usb_ep *ep;
+
+	csw->Residue = cpu_to_le32(cmd->data_len);
+
+	if (cmd->data_len) {
+		if (cmd->is_read) {
+			ep = fu->ep_in;
+			req = fu->bot_req_in;
+		} else {
+			ep = fu->ep_out;
+			req = fu->bot_req_out;
+		}
+
+		if (cmd->data_len > fu->ep_in->maxpacket) {
+			req->length = ep->maxpacket;
+			cmd->data_len -= ep->maxpacket;
+		} else {
+			req->length = cmd->data_len;
+			cmd->data_len = 0;
+		}
+		req->complete = bot_err_compl;
+		req->context = cmd;
+		req->buf = fu->cmd.buf;
+		usb_ep_queue(ep, req, GFP_KERNEL);
+	} else {
+		bot_enqueue_sense_code(fu, cmd);
+	}
+}
+
+static int bot_send_status(struct usbg_cmd *cmd, bool moved_data)
+{
+	struct f_uas *fu = cmd->fu;
+	struct bulk_cs_wrap *csw = &fu->bot_status.csw;
+	int ret;
+
+	if (cmd->se_cmd.scsi_status == SAM_STAT_GOOD) {
+		if (!moved_data && cmd->data_len) {
+			/*
+			 * the host wants to move data, we don't. Fill / empty
+			 * the pipe and then send the csw with reside set.
+			 */
+			cmd->csw_code = US_BULK_STAT_OK;
+			bot_send_bad_status(cmd);
+			return 0;
+		}
+
+		csw->Tag = cmd->bot_tag;
+		csw->Residue = cpu_to_le32(0);
+		csw->Status = US_BULK_STAT_OK;
+		fu->bot_status.req->context = cmd;
+
+		ret = usb_ep_queue(fu->ep_in, fu->bot_status.req, GFP_KERNEL);
+		if (ret)
+			pr_err("%s(%d) ERR: %d\n", __func__, __LINE__, ret);
+	} else {
+		cmd->csw_code = US_BULK_STAT_FAIL;
+		bot_send_bad_status(cmd);
+	}
+	return 0;
+}
+
+/*
+ * Called after command (no data transfer) or after the write (to device)
+ * operation is completed
+ */
+static int bot_send_status_response(struct usbg_cmd *cmd)
+{
+	bool moved_data = false;
+
+	if (!cmd->is_read)
+		moved_data = true;
+	return bot_send_status(cmd, moved_data);
+}
+
+/* Read request completed, now we have to send the CSW */
+static void bot_read_compl(struct usb_ep *ep, struct usb_request *req)
+{
+	struct usbg_cmd *cmd = req->context;
+
+	if (req->status < 0)
+		pr_err("ERR %s(%d)\n", __func__, __LINE__);
+
+	bot_send_status(cmd, true);
+}
+
+static int bot_send_read_response(struct usbg_cmd *cmd)
+{
+	struct f_uas *fu = cmd->fu;
+	struct se_cmd *se_cmd = &cmd->se_cmd;
+	struct usb_gadget *gadget = fuas_to_gadget(fu);
+	int ret;
+
+	if (!cmd->data_len) {
+		cmd->csw_code = US_BULK_STAT_PHASE;
+		bot_send_bad_status(cmd);
+		return 0;
+	}
+
+	if (!gadget->sg_supported) {
+		cmd->data_buf = kmalloc(se_cmd->data_length, GFP_ATOMIC);
+		if (!cmd->data_buf)
+			return -ENOMEM;
+
+		sg_copy_to_buffer(se_cmd->t_data_sg,
+				se_cmd->t_data_nents,
+				cmd->data_buf,
+				se_cmd->data_length);
+
+		fu->bot_req_in->buf = cmd->data_buf;
+	} else {
+		fu->bot_req_in->buf = NULL;
+		fu->bot_req_in->num_sgs = se_cmd->t_data_nents;
+		fu->bot_req_in->sg = se_cmd->t_data_sg;
+	}
+
+	fu->bot_req_in->complete = bot_read_compl;
+	fu->bot_req_in->length = se_cmd->data_length;
+	fu->bot_req_in->context = cmd;
+	ret = usb_ep_queue(fu->ep_in, fu->bot_req_in, GFP_ATOMIC);
+	if (ret)
+		pr_err("%s(%d)\n", __func__, __LINE__);
+	return 0;
+}
+
+static void usbg_data_write_cmpl(struct usb_ep *, struct usb_request *);
+static int usbg_prepare_w_request(struct usbg_cmd *, struct usb_request *);
+
+static int bot_send_write_request(struct usbg_cmd *cmd)
+{
+	struct f_uas *fu = cmd->fu;
+	struct se_cmd *se_cmd = &cmd->se_cmd;
+	struct usb_gadget *gadget = fuas_to_gadget(fu);
+	int ret;
+
+	init_completion(&cmd->write_complete);
+	cmd->fu = fu;
+
+	if (!cmd->data_len) {
+		cmd->csw_code = US_BULK_STAT_PHASE;
+		return -EINVAL;
+	}
+
+	if (!gadget->sg_supported) {
+		cmd->data_buf = kmalloc(se_cmd->data_length, GFP_KERNEL);
+		if (!cmd->data_buf)
+			return -ENOMEM;
+
+		fu->bot_req_out->buf = cmd->data_buf;
+	} else {
+		fu->bot_req_out->buf = NULL;
+		fu->bot_req_out->num_sgs = se_cmd->t_data_nents;
+		fu->bot_req_out->sg = se_cmd->t_data_sg;
+	}
+
+	fu->bot_req_out->complete = usbg_data_write_cmpl;
+	fu->bot_req_out->length = se_cmd->data_length;
+	fu->bot_req_out->context = cmd;
+
+	ret = usbg_prepare_w_request(cmd, fu->bot_req_out);
+	if (ret)
+		goto cleanup;
+	ret = usb_ep_queue(fu->ep_out, fu->bot_req_out, GFP_KERNEL);
+	if (ret)
+		pr_err("%s(%d)\n", __func__, __LINE__);
+
+	wait_for_completion(&cmd->write_complete);
+	target_execute_cmd(se_cmd);
+cleanup:
+	return ret;
+}
+
+static int bot_submit_command(struct f_uas *, void *, unsigned int);
+
+static void bot_cmd_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_uas *fu = req->context;
+	int ret;
+
+	fu->flags &= ~USBG_BOT_CMD_PEND;
+
+	if (req->status < 0)
+		return;
+
+	ret = bot_submit_command(fu, req->buf, req->actual);
+	if (ret)
+		pr_err("%s(%d): %d\n", __func__, __LINE__, ret);
+}
+
+static int bot_prepare_reqs(struct f_uas *fu)
+{
+	int ret;
+
+	fu->bot_req_in = usb_ep_alloc_request(fu->ep_in, GFP_KERNEL);
+	if (!fu->bot_req_in)
+		goto err;
+
+	fu->bot_req_out = usb_ep_alloc_request(fu->ep_out, GFP_KERNEL);
+	if (!fu->bot_req_out)
+		goto err_out;
+
+	fu->cmd.req = usb_ep_alloc_request(fu->ep_out, GFP_KERNEL);
+	if (!fu->cmd.req)
+		goto err_cmd;
+
+	fu->bot_status.req = usb_ep_alloc_request(fu->ep_in, GFP_KERNEL);
+	if (!fu->bot_status.req)
+		goto err_sts;
+
+	fu->bot_status.req->buf = &fu->bot_status.csw;
+	fu->bot_status.req->length = US_BULK_CS_WRAP_LEN;
+	fu->bot_status.req->complete = bot_status_complete;
+	fu->bot_status.csw.Signature = cpu_to_le32(US_BULK_CS_SIGN);
+
+	fu->cmd.buf = kmalloc(fu->ep_out->maxpacket, GFP_KERNEL);
+	if (!fu->cmd.buf)
+		goto err_buf;
+
+	fu->cmd.req->complete = bot_cmd_complete;
+	fu->cmd.req->buf = fu->cmd.buf;
+	fu->cmd.req->length = fu->ep_out->maxpacket;
+	fu->cmd.req->context = fu;
+
+	ret = bot_enqueue_cmd_cbw(fu);
+	if (ret)
+		goto err_queue;
+	return 0;
+err_queue:
+	kfree(fu->cmd.buf);
+	fu->cmd.buf = NULL;
+err_buf:
+	usb_ep_free_request(fu->ep_in, fu->bot_status.req);
+err_sts:
+	usb_ep_free_request(fu->ep_out, fu->cmd.req);
+	fu->cmd.req = NULL;
+err_cmd:
+	usb_ep_free_request(fu->ep_out, fu->bot_req_out);
+	fu->bot_req_out = NULL;
+err_out:
+	usb_ep_free_request(fu->ep_in, fu->bot_req_in);
+	fu->bot_req_in = NULL;
+err:
+	pr_err("BOT: endpoint setup failed\n");
+	return -ENOMEM;
+}
+
+static void bot_cleanup_old_alt(struct f_uas *fu)
+{
+	if (!(fu->flags & USBG_ENABLED))
+		return;
+
+	usb_ep_disable(fu->ep_in);
+	usb_ep_disable(fu->ep_out);
+
+	if (!fu->bot_req_in)
+		return;
+
+	usb_ep_free_request(fu->ep_in, fu->bot_req_in);
+	usb_ep_free_request(fu->ep_out, fu->bot_req_out);
+	usb_ep_free_request(fu->ep_out, fu->cmd.req);
+	usb_ep_free_request(fu->ep_in, fu->bot_status.req);
+
+	kfree(fu->cmd.buf);
+
+	fu->bot_req_in = NULL;
+	fu->bot_req_out = NULL;
+	fu->cmd.req = NULL;
+	fu->bot_status.req = NULL;
+	fu->cmd.buf = NULL;
+}
+
+static void bot_set_alt(struct f_uas *fu)
+{
+	struct usb_function *f = &fu->function;
+	struct usb_gadget *gadget = f->config->cdev->gadget;
+	int ret;
+
+	fu->flags = USBG_IS_BOT;
+
+	config_ep_by_speed_and_alt(gadget, f, fu->ep_in, USB_G_ALT_INT_BBB);
+	ret = usb_ep_enable(fu->ep_in);
+	if (ret)
+		goto err_b_in;
+
+	config_ep_by_speed_and_alt(gadget, f, fu->ep_out, USB_G_ALT_INT_BBB);
+	ret = usb_ep_enable(fu->ep_out);
+	if (ret)
+		goto err_b_out;
+
+	ret = bot_prepare_reqs(fu);
+	if (ret)
+		goto err_wq;
+	fu->flags |= USBG_ENABLED;
+	pr_info("Using the BOT protocol\n");
+	return;
+err_wq:
+	usb_ep_disable(fu->ep_out);
+err_b_out:
+	usb_ep_disable(fu->ep_in);
+err_b_in:
+	fu->flags = USBG_IS_BOT;
+}
+
+static int usbg_bot_setup(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct f_uas *fu = to_f_uas(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	u16 w_value = le16_to_cpu(ctrl->wValue);
+	u16 w_length = le16_to_cpu(ctrl->wLength);
+	int luns;
+	u8 *ret_lun;
+
+	switch (ctrl->bRequest) {
+	case US_BULK_GET_MAX_LUN:
+		if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_CLASS |
+					USB_RECIP_INTERFACE))
+			return -ENOTSUPP;
+
+		if (w_length < 1)
+			return -EINVAL;
+		if (w_value != 0)
+			return -EINVAL;
+		luns = atomic_read(&fu->tpg->tpg_port_count);
+		if (!luns) {
+			pr_err("No LUNs configured?\n");
+			return -EINVAL;
+		}
+		/*
+		 * If 4 LUNs are present we return 3 i.e. LUN 0..3 can be
+		 * accessed. The upper limit is 0xf
+		 */
+		luns--;
+		if (luns > 0xf) {
+			pr_info_once("Limiting the number of luns to 16\n");
+			luns = 0xf;
+		}
+		ret_lun = cdev->req->buf;
+		*ret_lun = luns;
+		cdev->req->length = 1;
+		return usb_ep_queue(cdev->gadget->ep0, cdev->req, GFP_ATOMIC);
+
+	case US_BULK_RESET_REQUEST:
+		/* XXX maybe we should remove previous requests for IN + OUT */
+		bot_enqueue_cmd_cbw(fu);
+		return 0;
+	}
+	return -ENOTSUPP;
+}
+
+/* Start uas.c code */
+
+static void uasp_cleanup_one_stream(struct f_uas *fu, struct uas_stream *stream)
+{
+	/* We have either all three allocated or none */
+	if (!stream->req_in)
+		return;
+
+	usb_ep_free_request(fu->ep_in, stream->req_in);
+	usb_ep_free_request(fu->ep_out, stream->req_out);
+	usb_ep_free_request(fu->ep_status, stream->req_status);
+
+	stream->req_in = NULL;
+	stream->req_out = NULL;
+	stream->req_status = NULL;
+}
+
+static void uasp_free_cmdreq(struct f_uas *fu)
+{
+	usb_ep_free_request(fu->ep_cmd, fu->cmd.req);
+	kfree(fu->cmd.buf);
+	fu->cmd.req = NULL;
+	fu->cmd.buf = NULL;
+}
+
+static void uasp_cleanup_old_alt(struct f_uas *fu)
+{
+	int i;
+
+	if (!(fu->flags & USBG_ENABLED))
+		return;
+
+	usb_ep_disable(fu->ep_in);
+	usb_ep_disable(fu->ep_out);
+	usb_ep_disable(fu->ep_status);
+	usb_ep_disable(fu->ep_cmd);
+
+	for (i = 0; i < UASP_SS_EP_COMP_NUM_STREAMS; i++)
+		uasp_cleanup_one_stream(fu, &fu->stream[i]);
+	uasp_free_cmdreq(fu);
+}
+
+static void uasp_status_data_cmpl(struct usb_ep *ep, struct usb_request *req);
+
+static int uasp_prepare_r_request(struct usbg_cmd *cmd)
+{
+	struct se_cmd *se_cmd = &cmd->se_cmd;
+	struct f_uas *fu = cmd->fu;
+	struct usb_gadget *gadget = fuas_to_gadget(fu);
+	struct uas_stream *stream = cmd->stream;
+
+	if (!gadget->sg_supported) {
+		cmd->data_buf = kmalloc(se_cmd->data_length, GFP_ATOMIC);
+		if (!cmd->data_buf)
+			return -ENOMEM;
+
+		sg_copy_to_buffer(se_cmd->t_data_sg,
+				se_cmd->t_data_nents,
+				cmd->data_buf,
+				se_cmd->data_length);
+
+		stream->req_in->buf = cmd->data_buf;
+	} else {
+		stream->req_in->buf = NULL;
+		stream->req_in->num_sgs = se_cmd->t_data_nents;
+		stream->req_in->sg = se_cmd->t_data_sg;
+	}
+
+	stream->req_in->is_last = 1;
+	stream->req_in->complete = uasp_status_data_cmpl;
+	stream->req_in->length = se_cmd->data_length;
+	stream->req_in->context = cmd;
+
+	cmd->state = UASP_SEND_STATUS;
+	return 0;
+}
+
+static void uasp_prepare_status(struct usbg_cmd *cmd)
+{
+	struct se_cmd *se_cmd = &cmd->se_cmd;
+	struct sense_iu *iu = &cmd->sense_iu;
+	struct uas_stream *stream = cmd->stream;
+
+	cmd->state = UASP_QUEUE_COMMAND;
+	iu->iu_id = IU_ID_STATUS;
+	iu->tag = cpu_to_be16(cmd->tag);
+
+	/*
+	 * iu->status_qual = cpu_to_be16(STATUS QUALIFIER SAM-4. Where R U?);
+	 */
+	iu->len = cpu_to_be16(se_cmd->scsi_sense_length);
+	iu->status = se_cmd->scsi_status;
+	stream->req_status->is_last = 1;
+	stream->req_status->context = cmd;
+	stream->req_status->length = se_cmd->scsi_sense_length + 16;
+	stream->req_status->buf = iu;
+	stream->req_status->complete = uasp_status_data_cmpl;
+}
+
+static void uasp_status_data_cmpl(struct usb_ep *ep, struct usb_request *req)
+{
+	struct usbg_cmd *cmd = req->context;
+	struct uas_stream *stream = cmd->stream;
+	struct f_uas *fu = cmd->fu;
+	int ret;
+
+	if (req->status < 0)
+		goto cleanup;
+
+	switch (cmd->state) {
+	case UASP_SEND_DATA:
+		ret = uasp_prepare_r_request(cmd);
+		if (ret)
+			goto cleanup;
+		ret = usb_ep_queue(fu->ep_in, stream->req_in, GFP_ATOMIC);
+		if (ret)
+			pr_err("%s(%d) => %d\n", __func__, __LINE__, ret);
+		break;
+
+	case UASP_RECEIVE_DATA:
+		ret = usbg_prepare_w_request(cmd, stream->req_out);
+		if (ret)
+			goto cleanup;
+		ret = usb_ep_queue(fu->ep_out, stream->req_out, GFP_ATOMIC);
+		if (ret)
+			pr_err("%s(%d) => %d\n", __func__, __LINE__, ret);
+		break;
+
+	case UASP_SEND_STATUS:
+		uasp_prepare_status(cmd);
+		ret = usb_ep_queue(fu->ep_status, stream->req_status,
+				GFP_ATOMIC);
+		if (ret)
+			pr_err("%s(%d) => %d\n", __func__, __LINE__, ret);
+		break;
+
+	case UASP_QUEUE_COMMAND:
+		transport_generic_free_cmd(&cmd->se_cmd, 0);
+		usb_ep_queue(fu->ep_cmd, fu->cmd.req, GFP_ATOMIC);
+		break;
+
+	default:
+		BUG();
+	}
+	return;
+
+cleanup:
+	transport_generic_free_cmd(&cmd->se_cmd, 0);
+}
+
+static int uasp_send_status_response(struct usbg_cmd *cmd)
+{
+	struct f_uas *fu = cmd->fu;
+	struct uas_stream *stream = cmd->stream;
+	struct sense_iu *iu = &cmd->sense_iu;
+
+	iu->tag = cpu_to_be16(cmd->tag);
+	stream->req_status->complete = uasp_status_data_cmpl;
+	stream->req_status->context = cmd;
+	cmd->fu = fu;
+	uasp_prepare_status(cmd);
+	return usb_ep_queue(fu->ep_status, stream->req_status, GFP_ATOMIC);
+}
+
+static int uasp_send_read_response(struct usbg_cmd *cmd)
+{
+	struct f_uas *fu = cmd->fu;
+	struct uas_stream *stream = cmd->stream;
+	struct sense_iu *iu = &cmd->sense_iu;
+	int ret;
+
+	cmd->fu = fu;
+
+	iu->tag = cpu_to_be16(cmd->tag);
+	if (fu->flags & USBG_USE_STREAMS) {
+
+		ret = uasp_prepare_r_request(cmd);
+		if (ret)
+			goto out;
+		ret = usb_ep_queue(fu->ep_in, stream->req_in, GFP_ATOMIC);
+		if (ret) {
+			pr_err("%s(%d) => %d\n", __func__, __LINE__, ret);
+			kfree(cmd->data_buf);
+			cmd->data_buf = NULL;
+		}
+
+	} else {
+
+		iu->iu_id = IU_ID_READ_READY;
+		iu->tag = cpu_to_be16(cmd->tag);
+
+		stream->req_status->complete = uasp_status_data_cmpl;
+		stream->req_status->context = cmd;
+
+		cmd->state = UASP_SEND_DATA;
+		stream->req_status->buf = iu;
+		stream->req_status->length = sizeof(struct iu);
+
+		ret = usb_ep_queue(fu->ep_status, stream->req_status,
+				GFP_ATOMIC);
+		if (ret)
+			pr_err("%s(%d) => %d\n", __func__, __LINE__, ret);
+	}
+out:
+	return ret;
+}
+
+static int uasp_send_write_request(struct usbg_cmd *cmd)
+{
+	struct f_uas *fu = cmd->fu;
+	struct se_cmd *se_cmd = &cmd->se_cmd;
+	struct uas_stream *stream = cmd->stream;
+	struct sense_iu *iu = &cmd->sense_iu;
+	int ret;
+
+	init_completion(&cmd->write_complete);
+	cmd->fu = fu;
+
+	iu->tag = cpu_to_be16(cmd->tag);
+
+	if (fu->flags & USBG_USE_STREAMS) {
+
+		ret = usbg_prepare_w_request(cmd, stream->req_out);
+		if (ret)
+			goto cleanup;
+		ret = usb_ep_queue(fu->ep_out, stream->req_out, GFP_ATOMIC);
+		if (ret)
+			pr_err("%s(%d)\n", __func__, __LINE__);
+
+	} else {
+
+		iu->iu_id = IU_ID_WRITE_READY;
+		iu->tag = cpu_to_be16(cmd->tag);
+
+		stream->req_status->complete = uasp_status_data_cmpl;
+		stream->req_status->context = cmd;
+
+		cmd->state = UASP_RECEIVE_DATA;
+		stream->req_status->buf = iu;
+		stream->req_status->length = sizeof(struct iu);
+
+		ret = usb_ep_queue(fu->ep_status, stream->req_status,
+				GFP_ATOMIC);
+		if (ret)
+			pr_err("%s(%d)\n", __func__, __LINE__);
+	}
+
+	wait_for_completion(&cmd->write_complete);
+	target_execute_cmd(se_cmd);
+cleanup:
+	return ret;
+}
+
+static int usbg_submit_command(struct f_uas *, void *, unsigned int);
+
+static void uasp_cmd_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_uas *fu = req->context;
+	int ret;
+
+	if (req->status < 0)
+		return;
+
+	ret = usbg_submit_command(fu, req->buf, req->actual);
+	/*
+	 * Once we tune for performance enqueue the command req here again so
+	 * we can receive a second command while we processing this one. Pay
+	 * attention to properly sync STAUS endpoint with DATA IN + OUT so you
+	 * don't break HS.
+	 */
+	if (!ret)
+		return;
+	usb_ep_queue(fu->ep_cmd, fu->cmd.req, GFP_ATOMIC);
+}
+
+static int uasp_alloc_stream_res(struct f_uas *fu, struct uas_stream *stream)
+{
+	stream->req_in = usb_ep_alloc_request(fu->ep_in, GFP_KERNEL);
+	if (!stream->req_in)
+		goto out;
+
+	stream->req_out = usb_ep_alloc_request(fu->ep_out, GFP_KERNEL);
+	if (!stream->req_out)
+		goto err_out;
+
+	stream->req_status = usb_ep_alloc_request(fu->ep_status, GFP_KERNEL);
+	if (!stream->req_status)
+		goto err_sts;
+
+	return 0;
+
+err_sts:
+	usb_ep_free_request(fu->ep_out, stream->req_out);
+	stream->req_out = NULL;
+err_out:
+	usb_ep_free_request(fu->ep_in, stream->req_in);
+	stream->req_in = NULL;
+out:
+	return -ENOMEM;
+}
+
+static int uasp_alloc_cmd(struct f_uas *fu)
+{
+	fu->cmd.req = usb_ep_alloc_request(fu->ep_cmd, GFP_KERNEL);
+	if (!fu->cmd.req)
+		goto err;
+
+	fu->cmd.buf = kmalloc(fu->ep_cmd->maxpacket, GFP_KERNEL);
+	if (!fu->cmd.buf)
+		goto err_buf;
+
+	fu->cmd.req->complete = uasp_cmd_complete;
+	fu->cmd.req->buf = fu->cmd.buf;
+	fu->cmd.req->length = fu->ep_cmd->maxpacket;
+	fu->cmd.req->context = fu;
+	return 0;
+
+err_buf:
+	usb_ep_free_request(fu->ep_cmd, fu->cmd.req);
+err:
+	return -ENOMEM;
+}
+
+static void uasp_setup_stream_res(struct f_uas *fu, int max_streams)
+{
+	int i;
+
+	for (i = 0; i < max_streams; i++) {
+		struct uas_stream *s = &fu->stream[i];
+
+		s->req_in->stream_id = i + 1;
+		s->req_out->stream_id = i + 1;
+		s->req_status->stream_id = i + 1;
+	}
+}
+
+static int uasp_prepare_reqs(struct f_uas *fu)
+{
+	int ret;
+	int i;
+	int max_streams;
+
+	if (fu->flags & USBG_USE_STREAMS)
+		max_streams = UASP_SS_EP_COMP_NUM_STREAMS;
+	else
+		max_streams = 1;
+
+	for (i = 0; i < max_streams; i++) {
+		ret = uasp_alloc_stream_res(fu, &fu->stream[i]);
+		if (ret)
+			goto err_cleanup;
+	}
+
+	ret = uasp_alloc_cmd(fu);
+	if (ret)
+		goto err_free_stream;
+	uasp_setup_stream_res(fu, max_streams);
+
+	ret = usb_ep_queue(fu->ep_cmd, fu->cmd.req, GFP_ATOMIC);
+	if (ret)
+		goto err_free_stream;
+
+	return 0;
+
+err_free_stream:
+	uasp_free_cmdreq(fu);
+
+err_cleanup:
+	if (i) {
+		do {
+			uasp_cleanup_one_stream(fu, &fu->stream[i - 1]);
+			i--;
+		} while (i);
+	}
+	pr_err("UASP: endpoint setup failed\n");
+	return ret;
+}
+
+static void uasp_set_alt(struct f_uas *fu)
+{
+	struct usb_function *f = &fu->function;
+	struct usb_gadget *gadget = f->config->cdev->gadget;
+	int ret;
+
+	fu->flags = USBG_IS_UAS;
+
+	if (gadget->speed >= USB_SPEED_SUPER)
+		fu->flags |= USBG_USE_STREAMS;
+
+	config_ep_by_speed_and_alt(gadget, f, fu->ep_in, USB_G_ALT_INT_UAS);
+	ret = usb_ep_enable(fu->ep_in);
+	if (ret)
+		goto err_b_in;
+
+	config_ep_by_speed_and_alt(gadget, f, fu->ep_out, USB_G_ALT_INT_UAS);
+	ret = usb_ep_enable(fu->ep_out);
+	if (ret)
+		goto err_b_out;
+
+	config_ep_by_speed_and_alt(gadget, f, fu->ep_cmd, USB_G_ALT_INT_UAS);
+	ret = usb_ep_enable(fu->ep_cmd);
+	if (ret)
+		goto err_cmd;
+	config_ep_by_speed_and_alt(gadget, f, fu->ep_status, USB_G_ALT_INT_UAS);
+	ret = usb_ep_enable(fu->ep_status);
+	if (ret)
+		goto err_status;
+
+	ret = uasp_prepare_reqs(fu);
+	if (ret)
+		goto err_wq;
+	fu->flags |= USBG_ENABLED;
+
+	pr_info("Using the UAS protocol\n");
+	return;
+err_wq:
+	usb_ep_disable(fu->ep_status);
+err_status:
+	usb_ep_disable(fu->ep_cmd);
+err_cmd:
+	usb_ep_disable(fu->ep_out);
+err_b_out:
+	usb_ep_disable(fu->ep_in);
+err_b_in:
+	fu->flags = 0;
+}
+
+static int get_cmd_dir(const unsigned char *cdb)
+{
+	int ret;
+
+	switch (cdb[0]) {
+	case READ_6:
+	case READ_10:
+	case READ_12:
+	case READ_16:
+	case INQUIRY:
+	case MODE_SENSE:
+	case MODE_SENSE_10:
+	case SERVICE_ACTION_IN_16:
+	case MAINTENANCE_IN:
+	case PERSISTENT_RESERVE_IN:
+	case SECURITY_PROTOCOL_IN:
+	case ACCESS_CONTROL_IN:
+	case REPORT_LUNS:
+	case READ_BLOCK_LIMITS:
+	case READ_POSITION:
+	case READ_CAPACITY:
+	case READ_TOC:
+	case READ_FORMAT_CAPACITIES:
+	case REQUEST_SENSE:
+		ret = DMA_FROM_DEVICE;
+		break;
+
+	case WRITE_6:
+	case WRITE_10:
+	case WRITE_12:
+	case WRITE_16:
+	case MODE_SELECT:
+	case MODE_SELECT_10:
+	case WRITE_VERIFY:
+	case WRITE_VERIFY_12:
+	case PERSISTENT_RESERVE_OUT:
+	case MAINTENANCE_OUT:
+	case SECURITY_PROTOCOL_OUT:
+	case ACCESS_CONTROL_OUT:
+		ret = DMA_TO_DEVICE;
+		break;
+	case ALLOW_MEDIUM_REMOVAL:
+	case TEST_UNIT_READY:
+	case SYNCHRONIZE_CACHE:
+	case START_STOP:
+	case ERASE:
+	case REZERO_UNIT:
+	case SEEK_10:
+	case SPACE:
+	case VERIFY:
+	case WRITE_FILEMARKS:
+		ret = DMA_NONE;
+		break;
+	default:
+#define CMD_DIR_MSG "target: Unknown data direction for SCSI Opcode 0x%02x\n"
+		pr_warn(CMD_DIR_MSG, cdb[0]);
+#undef CMD_DIR_MSG
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+static void usbg_data_write_cmpl(struct usb_ep *ep, struct usb_request *req)
+{
+	struct usbg_cmd *cmd = req->context;
+	struct se_cmd *se_cmd = &cmd->se_cmd;
+
+	if (req->status < 0) {
+		pr_err("%s() state %d transfer failed\n", __func__, cmd->state);
+		goto cleanup;
+	}
+
+	if (req->num_sgs == 0) {
+		sg_copy_from_buffer(se_cmd->t_data_sg,
+				se_cmd->t_data_nents,
+				cmd->data_buf,
+				se_cmd->data_length);
+	}
+
+	complete(&cmd->write_complete);
+	return;
+
+cleanup:
+	transport_generic_free_cmd(&cmd->se_cmd, 0);
+}
+
+static int usbg_prepare_w_request(struct usbg_cmd *cmd, struct usb_request *req)
+{
+	struct se_cmd *se_cmd = &cmd->se_cmd;
+	struct f_uas *fu = cmd->fu;
+	struct usb_gadget *gadget = fuas_to_gadget(fu);
+
+	if (!gadget->sg_supported) {
+		cmd->data_buf = kmalloc(se_cmd->data_length, GFP_ATOMIC);
+		if (!cmd->data_buf)
+			return -ENOMEM;
+
+		req->buf = cmd->data_buf;
+	} else {
+		req->buf = NULL;
+		req->num_sgs = se_cmd->t_data_nents;
+		req->sg = se_cmd->t_data_sg;
+	}
+
+	req->is_last = 1;
+	req->complete = usbg_data_write_cmpl;
+	req->length = se_cmd->data_length;
+	req->context = cmd;
+	return 0;
+}
+
+static int usbg_send_status_response(struct se_cmd *se_cmd)
+{
+	struct usbg_cmd *cmd = container_of(se_cmd, struct usbg_cmd,
+			se_cmd);
+	struct f_uas *fu = cmd->fu;
+
+	if (fu->flags & USBG_IS_BOT)
+		return bot_send_status_response(cmd);
+	else
+		return uasp_send_status_response(cmd);
+}
+
+static int usbg_send_write_request(struct se_cmd *se_cmd)
+{
+	struct usbg_cmd *cmd = container_of(se_cmd, struct usbg_cmd,
+			se_cmd);
+	struct f_uas *fu = cmd->fu;
+
+	if (fu->flags & USBG_IS_BOT)
+		return bot_send_write_request(cmd);
+	else
+		return uasp_send_write_request(cmd);
+}
+
+static int usbg_send_read_response(struct se_cmd *se_cmd)
+{
+	struct usbg_cmd *cmd = container_of(se_cmd, struct usbg_cmd,
+			se_cmd);
+	struct f_uas *fu = cmd->fu;
+
+	if (fu->flags & USBG_IS_BOT)
+		return bot_send_read_response(cmd);
+	else
+		return uasp_send_read_response(cmd);
+}
+
+static void usbg_cmd_work(struct work_struct *work)
+{
+	struct usbg_cmd *cmd = container_of(work, struct usbg_cmd, work);
+	struct se_cmd *se_cmd;
+	struct tcm_usbg_nexus *tv_nexus;
+	struct usbg_tpg *tpg;
+	int dir, flags = (TARGET_SCF_UNKNOWN_SIZE | TARGET_SCF_ACK_KREF);
+
+	se_cmd = &cmd->se_cmd;
+	tpg = cmd->fu->tpg;
+	tv_nexus = tpg->tpg_nexus;
+	dir = get_cmd_dir(cmd->cmd_buf);
+	if (dir < 0) {
+		__target_init_cmd(se_cmd,
+				  tv_nexus->tvn_se_sess->se_tpg->se_tpg_tfo,
+				  tv_nexus->tvn_se_sess, cmd->data_len, DMA_NONE,
+				  cmd->prio_attr, cmd->sense_iu.sense,
+				  cmd->unpacked_lun, NULL);
+		goto out;
+	}
+
+	target_submit_cmd(se_cmd, tv_nexus->tvn_se_sess, cmd->cmd_buf,
+			  cmd->sense_iu.sense, cmd->unpacked_lun, 0,
+			  cmd->prio_attr, dir, flags);
+	return;
+
+out:
+	transport_send_check_condition_and_sense(se_cmd,
+			TCM_UNSUPPORTED_SCSI_OPCODE, 1);
+	transport_generic_free_cmd(&cmd->se_cmd, 0);
+}
+
+static struct usbg_cmd *usbg_get_cmd(struct f_uas *fu,
+		struct tcm_usbg_nexus *tv_nexus, u32 scsi_tag)
+{
+	struct se_session *se_sess = tv_nexus->tvn_se_sess;
+	struct usbg_cmd *cmd;
+	int tag, cpu;
+
+	tag = sbitmap_queue_get(&se_sess->sess_tag_pool, &cpu);
+	if (tag < 0)
+		return ERR_PTR(-ENOMEM);
+
+	cmd = &((struct usbg_cmd *)se_sess->sess_cmd_map)[tag];
+	memset(cmd, 0, sizeof(*cmd));
+	cmd->se_cmd.map_tag = tag;
+	cmd->se_cmd.map_cpu = cpu;
+	cmd->se_cmd.tag = cmd->tag = scsi_tag;
+	cmd->fu = fu;
+
+	return cmd;
+}
+
+static void usbg_release_cmd(struct se_cmd *);
+
+static int usbg_submit_command(struct f_uas *fu,
+		void *cmdbuf, unsigned int len)
+{
+	struct command_iu *cmd_iu = cmdbuf;
+	struct usbg_cmd *cmd;
+	struct usbg_tpg *tpg = fu->tpg;
+	struct tcm_usbg_nexus *tv_nexus;
+	u32 cmd_len;
+	u16 scsi_tag;
+
+	if (cmd_iu->iu_id != IU_ID_COMMAND) {
+		pr_err("Unsupported type %d\n", cmd_iu->iu_id);
+		return -EINVAL;
+	}
+
+	tv_nexus = tpg->tpg_nexus;
+	if (!tv_nexus) {
+		pr_err("Missing nexus, ignoring command\n");
+		return -EINVAL;
+	}
+
+	cmd_len = (cmd_iu->len & ~0x3) + 16;
+	if (cmd_len > USBG_MAX_CMD)
+		return -EINVAL;
+
+	scsi_tag = be16_to_cpup(&cmd_iu->tag);
+	cmd = usbg_get_cmd(fu, tv_nexus, scsi_tag);
+	if (IS_ERR(cmd)) {
+		pr_err("usbg_get_cmd failed\n");
+		return -ENOMEM;
+	}
+	memcpy(cmd->cmd_buf, cmd_iu->cdb, cmd_len);
+
+	if (fu->flags & USBG_USE_STREAMS) {
+		if (cmd->tag > UASP_SS_EP_COMP_NUM_STREAMS)
+			goto err;
+		if (!cmd->tag)
+			cmd->stream = &fu->stream[0];
+		else
+			cmd->stream = &fu->stream[cmd->tag - 1];
+	} else {
+		cmd->stream = &fu->stream[0];
+	}
+
+	switch (cmd_iu->prio_attr & 0x7) {
+	case UAS_HEAD_TAG:
+		cmd->prio_attr = TCM_HEAD_TAG;
+		break;
+	case UAS_ORDERED_TAG:
+		cmd->prio_attr = TCM_ORDERED_TAG;
+		break;
+	case UAS_ACA:
+		cmd->prio_attr = TCM_ACA_TAG;
+		break;
+	default:
+		pr_debug_once("Unsupported prio_attr: %02x.\n",
+				cmd_iu->prio_attr);
+		fallthrough;
+	case UAS_SIMPLE_TAG:
+		cmd->prio_attr = TCM_SIMPLE_TAG;
+		break;
+	}
+
+	cmd->unpacked_lun = scsilun_to_int(&cmd_iu->lun);
+
+	INIT_WORK(&cmd->work, usbg_cmd_work);
+	queue_work(tpg->workqueue, &cmd->work);
+
+	return 0;
+err:
+	usbg_release_cmd(&cmd->se_cmd);
+	return -EINVAL;
+}
+
+static void bot_cmd_work(struct work_struct *work)
+{
+	struct usbg_cmd *cmd = container_of(work, struct usbg_cmd, work);
+	struct se_cmd *se_cmd;
+	struct tcm_usbg_nexus *tv_nexus;
+	struct usbg_tpg *tpg;
+	int dir;
+
+	se_cmd = &cmd->se_cmd;
+	tpg = cmd->fu->tpg;
+	tv_nexus = tpg->tpg_nexus;
+	dir = get_cmd_dir(cmd->cmd_buf);
+	if (dir < 0) {
+		__target_init_cmd(se_cmd,
+				  tv_nexus->tvn_se_sess->se_tpg->se_tpg_tfo,
+				  tv_nexus->tvn_se_sess, cmd->data_len, DMA_NONE,
+				  cmd->prio_attr, cmd->sense_iu.sense,
+				  cmd->unpacked_lun, NULL);
+		goto out;
+	}
+
+	target_submit_cmd(se_cmd, tv_nexus->tvn_se_sess,
+			  cmd->cmd_buf, cmd->sense_iu.sense, cmd->unpacked_lun,
+			  cmd->data_len, cmd->prio_attr, dir, 0);
+	return;
+
+out:
+	transport_send_check_condition_and_sense(se_cmd,
+				TCM_UNSUPPORTED_SCSI_OPCODE, 1);
+	transport_generic_free_cmd(&cmd->se_cmd, 0);
+}
+
+static int bot_submit_command(struct f_uas *fu,
+		void *cmdbuf, unsigned int len)
+{
+	struct bulk_cb_wrap *cbw = cmdbuf;
+	struct usbg_cmd *cmd;
+	struct usbg_tpg *tpg = fu->tpg;
+	struct tcm_usbg_nexus *tv_nexus;
+	u32 cmd_len;
+
+	if (cbw->Signature != cpu_to_le32(US_BULK_CB_SIGN)) {
+		pr_err("Wrong signature on CBW\n");
+		return -EINVAL;
+	}
+	if (len != 31) {
+		pr_err("Wrong length for CBW\n");
+		return -EINVAL;
+	}
+
+	cmd_len = cbw->Length;
+	if (cmd_len < 1 || cmd_len > 16)
+		return -EINVAL;
+
+	tv_nexus = tpg->tpg_nexus;
+	if (!tv_nexus) {
+		pr_err("Missing nexus, ignoring command\n");
+		return -ENODEV;
+	}
+
+	cmd = usbg_get_cmd(fu, tv_nexus, cbw->Tag);
+	if (IS_ERR(cmd)) {
+		pr_err("usbg_get_cmd failed\n");
+		return -ENOMEM;
+	}
+	memcpy(cmd->cmd_buf, cbw->CDB, cmd_len);
+
+	cmd->bot_tag = cbw->Tag;
+	cmd->prio_attr = TCM_SIMPLE_TAG;
+	cmd->unpacked_lun = cbw->Lun;
+	cmd->is_read = cbw->Flags & US_BULK_FLAG_IN ? 1 : 0;
+	cmd->data_len = le32_to_cpu(cbw->DataTransferLength);
+	cmd->se_cmd.tag = le32_to_cpu(cmd->bot_tag);
+
+	INIT_WORK(&cmd->work, bot_cmd_work);
+	queue_work(tpg->workqueue, &cmd->work);
+
+	return 0;
+}
+
+/* Start fabric.c code */
+
+static int usbg_check_true(struct se_portal_group *se_tpg)
+{
+	return 1;
+}
+
+static int usbg_check_false(struct se_portal_group *se_tpg)
+{
+	return 0;
+}
+
+static char *usbg_get_fabric_wwn(struct se_portal_group *se_tpg)
+{
+	struct usbg_tpg *tpg = container_of(se_tpg,
+				struct usbg_tpg, se_tpg);
+	struct usbg_tport *tport = tpg->tport;
+
+	return &tport->tport_name[0];
+}
+
+static u16 usbg_get_tag(struct se_portal_group *se_tpg)
+{
+	struct usbg_tpg *tpg = container_of(se_tpg,
+				struct usbg_tpg, se_tpg);
+	return tpg->tport_tpgt;
+}
+
+static u32 usbg_tpg_get_inst_index(struct se_portal_group *se_tpg)
+{
+	return 1;
+}
+
+static void usbg_release_cmd(struct se_cmd *se_cmd)
+{
+	struct usbg_cmd *cmd = container_of(se_cmd, struct usbg_cmd,
+			se_cmd);
+	struct se_session *se_sess = se_cmd->se_sess;
+
+	kfree(cmd->data_buf);
+	target_free_tag(se_sess, se_cmd);
+}
+
+static u32 usbg_sess_get_index(struct se_session *se_sess)
+{
+	return 0;
+}
+
+static void usbg_set_default_node_attrs(struct se_node_acl *nacl)
+{
+}
+
+static int usbg_get_cmd_state(struct se_cmd *se_cmd)
+{
+	return 0;
+}
+
+static void usbg_queue_tm_rsp(struct se_cmd *se_cmd)
+{
+}
+
+static void usbg_aborted_task(struct se_cmd *se_cmd)
+{
+}
+
+static const char *usbg_check_wwn(const char *name)
+{
+	const char *n;
+	unsigned int len;
+
+	n = strstr(name, "naa.");
+	if (!n)
+		return NULL;
+	n += 4;
+	len = strlen(n);
+	if (len == 0 || len > USBG_NAMELEN - 1)
+		return NULL;
+	return n;
+}
+
+static int usbg_init_nodeacl(struct se_node_acl *se_nacl, const char *name)
+{
+	if (!usbg_check_wwn(name))
+		return -EINVAL;
+	return 0;
+}
+
+static struct se_portal_group *usbg_make_tpg(struct se_wwn *wwn,
+					     const char *name)
+{
+	struct usbg_tport *tport = container_of(wwn, struct usbg_tport,
+			tport_wwn);
+	struct usbg_tpg *tpg;
+	unsigned long tpgt;
+	int ret;
+	struct f_tcm_opts *opts;
+	unsigned i;
+
+	if (strstr(name, "tpgt_") != name)
+		return ERR_PTR(-EINVAL);
+	if (kstrtoul(name + 5, 0, &tpgt) || tpgt > UINT_MAX)
+		return ERR_PTR(-EINVAL);
+	ret = -ENODEV;
+	mutex_lock(&tpg_instances_lock);
+	for (i = 0; i < TPG_INSTANCES; ++i)
+		if (tpg_instances[i].func_inst && !tpg_instances[i].tpg)
+			break;
+	if (i == TPG_INSTANCES)
+		goto unlock_inst;
+
+	opts = container_of(tpg_instances[i].func_inst, struct f_tcm_opts,
+		func_inst);
+	mutex_lock(&opts->dep_lock);
+	if (!opts->ready)
+		goto unlock_dep;
+
+	if (opts->has_dep) {
+		if (!try_module_get(opts->dependent))
+			goto unlock_dep;
+	} else {
+		ret = configfs_depend_item_unlocked(
+			wwn->wwn_group.cg_subsys,
+			&opts->func_inst.group.cg_item);
+		if (ret)
+			goto unlock_dep;
+	}
+
+	tpg = kzalloc(sizeof(struct usbg_tpg), GFP_KERNEL);
+	ret = -ENOMEM;
+	if (!tpg)
+		goto unref_dep;
+	mutex_init(&tpg->tpg_mutex);
+	atomic_set(&tpg->tpg_port_count, 0);
+	tpg->workqueue = alloc_workqueue("tcm_usb_gadget", 0, 1);
+	if (!tpg->workqueue)
+		goto free_tpg;
+
+	tpg->tport = tport;
+	tpg->tport_tpgt = tpgt;
+
+	/*
+	 * SPC doesn't assign a protocol identifier for USB-SCSI, so we
+	 * pretend to be SAS..
+	 */
+	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_SAS);
+	if (ret < 0)
+		goto free_workqueue;
+
+	tpg_instances[i].tpg = tpg;
+	tpg->fi = tpg_instances[i].func_inst;
+	mutex_unlock(&opts->dep_lock);
+	mutex_unlock(&tpg_instances_lock);
+	return &tpg->se_tpg;
+
+free_workqueue:
+	destroy_workqueue(tpg->workqueue);
+free_tpg:
+	kfree(tpg);
+unref_dep:
+	if (opts->has_dep)
+		module_put(opts->dependent);
+	else
+		configfs_undepend_item_unlocked(&opts->func_inst.group.cg_item);
+unlock_dep:
+	mutex_unlock(&opts->dep_lock);
+unlock_inst:
+	mutex_unlock(&tpg_instances_lock);
+
+	return ERR_PTR(ret);
+}
+
+static int tcm_usbg_drop_nexus(struct usbg_tpg *);
+
+static void usbg_drop_tpg(struct se_portal_group *se_tpg)
+{
+	struct usbg_tpg *tpg = container_of(se_tpg,
+				struct usbg_tpg, se_tpg);
+	unsigned i;
+	struct f_tcm_opts *opts;
+
+	tcm_usbg_drop_nexus(tpg);
+	core_tpg_deregister(se_tpg);
+	destroy_workqueue(tpg->workqueue);
+
+	mutex_lock(&tpg_instances_lock);
+	for (i = 0; i < TPG_INSTANCES; ++i)
+		if (tpg_instances[i].tpg == tpg)
+			break;
+	if (i < TPG_INSTANCES) {
+		tpg_instances[i].tpg = NULL;
+		opts = container_of(tpg_instances[i].func_inst,
+			struct f_tcm_opts, func_inst);
+		mutex_lock(&opts->dep_lock);
+		if (opts->has_dep)
+			module_put(opts->dependent);
+		else
+			configfs_undepend_item_unlocked(
+				&opts->func_inst.group.cg_item);
+		mutex_unlock(&opts->dep_lock);
+	}
+	mutex_unlock(&tpg_instances_lock);
+
+	kfree(tpg);
+}
+
+static struct se_wwn *usbg_make_tport(
+	struct target_fabric_configfs *tf,
+	struct config_group *group,
+	const char *name)
+{
+	struct usbg_tport *tport;
+	const char *wnn_name;
+	u64 wwpn = 0;
+
+	wnn_name = usbg_check_wwn(name);
+	if (!wnn_name)
+		return ERR_PTR(-EINVAL);
+
+	tport = kzalloc(sizeof(struct usbg_tport), GFP_KERNEL);
+	if (!(tport))
+		return ERR_PTR(-ENOMEM);
+
+	tport->tport_wwpn = wwpn;
+	snprintf(tport->tport_name, sizeof(tport->tport_name), "%s", wnn_name);
+	return &tport->tport_wwn;
+}
+
+static void usbg_drop_tport(struct se_wwn *wwn)
+{
+	struct usbg_tport *tport = container_of(wwn,
+				struct usbg_tport, tport_wwn);
+	kfree(tport);
+}
+
+/*
+ * If somebody feels like dropping the version property, go ahead.
+ */
+static ssize_t usbg_wwn_version_show(struct config_item *item,  char *page)
+{
+	return sprintf(page, "usb-gadget fabric module\n");
+}
+
+CONFIGFS_ATTR_RO(usbg_wwn_, version);
+
+static struct configfs_attribute *usbg_wwn_attrs[] = {
+	&usbg_wwn_attr_version,
+	NULL,
+};
+
+static int usbg_attach(struct usbg_tpg *);
+static void usbg_detach(struct usbg_tpg *);
+
+static int usbg_enable_tpg(struct se_portal_group *se_tpg, bool enable)
+{
+	struct usbg_tpg  *tpg = container_of(se_tpg, struct usbg_tpg, se_tpg);
+	int ret = 0;
+
+	if (enable)
+		ret = usbg_attach(tpg);
+	else
+		usbg_detach(tpg);
+	if (ret)
+		return ret;
+
+	tpg->gadget_connect = enable;
+
+	return 0;
+}
+
+static ssize_t tcm_usbg_tpg_nexus_show(struct config_item *item, char *page)
+{
+	struct se_portal_group *se_tpg = to_tpg(item);
+	struct usbg_tpg *tpg = container_of(se_tpg, struct usbg_tpg, se_tpg);
+	struct tcm_usbg_nexus *tv_nexus;
+	ssize_t ret;
+
+	mutex_lock(&tpg->tpg_mutex);
+	tv_nexus = tpg->tpg_nexus;
+	if (!tv_nexus) {
+		ret = -ENODEV;
+		goto out;
+	}
+	ret = snprintf(page, PAGE_SIZE, "%s\n",
+			tv_nexus->tvn_se_sess->se_node_acl->initiatorname);
+out:
+	mutex_unlock(&tpg->tpg_mutex);
+	return ret;
+}
+
+static int usbg_alloc_sess_cb(struct se_portal_group *se_tpg,
+			      struct se_session *se_sess, void *p)
+{
+	struct usbg_tpg *tpg = container_of(se_tpg,
+				struct usbg_tpg, se_tpg);
+
+	tpg->tpg_nexus = p;
+	return 0;
+}
+
+static int tcm_usbg_make_nexus(struct usbg_tpg *tpg, char *name)
+{
+	struct tcm_usbg_nexus *tv_nexus;
+	int ret = 0;
+
+	mutex_lock(&tpg->tpg_mutex);
+	if (tpg->tpg_nexus) {
+		ret = -EEXIST;
+		pr_debug("tpg->tpg_nexus already exists\n");
+		goto out_unlock;
+	}
+
+	tv_nexus = kzalloc(sizeof(*tv_nexus), GFP_KERNEL);
+	if (!tv_nexus) {
+		ret = -ENOMEM;
+		goto out_unlock;
+	}
+
+	tv_nexus->tvn_se_sess = target_setup_session(&tpg->se_tpg,
+						     USB_G_DEFAULT_SESSION_TAGS,
+						     sizeof(struct usbg_cmd),
+						     TARGET_PROT_NORMAL, name,
+						     tv_nexus, usbg_alloc_sess_cb);
+	if (IS_ERR(tv_nexus->tvn_se_sess)) {
+#define MAKE_NEXUS_MSG "core_tpg_check_initiator_node_acl() failed for %s\n"
+		pr_debug(MAKE_NEXUS_MSG, name);
+#undef MAKE_NEXUS_MSG
+		ret = PTR_ERR(tv_nexus->tvn_se_sess);
+		kfree(tv_nexus);
+	}
+
+out_unlock:
+	mutex_unlock(&tpg->tpg_mutex);
+	return ret;
+}
+
+static int tcm_usbg_drop_nexus(struct usbg_tpg *tpg)
+{
+	struct se_session *se_sess;
+	struct tcm_usbg_nexus *tv_nexus;
+	int ret = -ENODEV;
+
+	mutex_lock(&tpg->tpg_mutex);
+	tv_nexus = tpg->tpg_nexus;
+	if (!tv_nexus)
+		goto out;
+
+	se_sess = tv_nexus->tvn_se_sess;
+	if (!se_sess)
+		goto out;
+
+	if (atomic_read(&tpg->tpg_port_count)) {
+		ret = -EPERM;
+#define MSG "Unable to remove Host I_T Nexus with active TPG port count: %d\n"
+		pr_err(MSG, atomic_read(&tpg->tpg_port_count));
+#undef MSG
+		goto out;
+	}
+
+	pr_debug("Removing I_T Nexus to Initiator Port: %s\n",
+			tv_nexus->tvn_se_sess->se_node_acl->initiatorname);
+	/*
+	 * Release the SCSI I_T Nexus to the emulated vHost Target Port
+	 */
+	target_remove_session(se_sess);
+	tpg->tpg_nexus = NULL;
+
+	kfree(tv_nexus);
+	ret = 0;
+out:
+	mutex_unlock(&tpg->tpg_mutex);
+	return ret;
+}
+
+static ssize_t tcm_usbg_tpg_nexus_store(struct config_item *item,
+		const char *page, size_t count)
+{
+	struct se_portal_group *se_tpg = to_tpg(item);
+	struct usbg_tpg *tpg = container_of(se_tpg, struct usbg_tpg, se_tpg);
+	unsigned char i_port[USBG_NAMELEN], *ptr;
+	int ret;
+
+	if (!strncmp(page, "NULL", 4)) {
+		ret = tcm_usbg_drop_nexus(tpg);
+		return (!ret) ? count : ret;
+	}
+	if (strlen(page) >= USBG_NAMELEN) {
+
+#define NEXUS_STORE_MSG "Emulated NAA Sas Address: %s, exceeds max: %d\n"
+		pr_err(NEXUS_STORE_MSG, page, USBG_NAMELEN);
+#undef NEXUS_STORE_MSG
+		return -EINVAL;
+	}
+	snprintf(i_port, USBG_NAMELEN, "%s", page);
+
+	ptr = strstr(i_port, "naa.");
+	if (!ptr) {
+		pr_err("Missing 'naa.' prefix\n");
+		return -EINVAL;
+	}
+
+	if (i_port[strlen(i_port) - 1] == '\n')
+		i_port[strlen(i_port) - 1] = '\0';
+
+	ret = tcm_usbg_make_nexus(tpg, &i_port[0]);
+	if (ret < 0)
+		return ret;
+	return count;
+}
+
+CONFIGFS_ATTR(tcm_usbg_tpg_, nexus);
+
+static struct configfs_attribute *usbg_base_attrs[] = {
+	&tcm_usbg_tpg_attr_nexus,
+	NULL,
+};
+
+static int usbg_port_link(struct se_portal_group *se_tpg, struct se_lun *lun)
+{
+	struct usbg_tpg *tpg = container_of(se_tpg, struct usbg_tpg, se_tpg);
+
+	atomic_inc(&tpg->tpg_port_count);
+	smp_mb__after_atomic();
+	return 0;
+}
+
+static void usbg_port_unlink(struct se_portal_group *se_tpg,
+		struct se_lun *se_lun)
+{
+	struct usbg_tpg *tpg = container_of(se_tpg, struct usbg_tpg, se_tpg);
+
+	atomic_dec(&tpg->tpg_port_count);
+	smp_mb__after_atomic();
+}
+
+static int usbg_check_stop_free(struct se_cmd *se_cmd)
+{
+	return target_put_sess_cmd(se_cmd);
+}
+
+static const struct target_core_fabric_ops usbg_ops = {
+	.module				= THIS_MODULE,
+	.fabric_name			= "usb_gadget",
+	.tpg_get_wwn			= usbg_get_fabric_wwn,
+	.tpg_get_tag			= usbg_get_tag,
+	.tpg_check_demo_mode		= usbg_check_true,
+	.tpg_check_demo_mode_cache	= usbg_check_false,
+	.tpg_check_demo_mode_write_protect = usbg_check_false,
+	.tpg_check_prod_mode_write_protect = usbg_check_false,
+	.tpg_get_inst_index		= usbg_tpg_get_inst_index,
+	.release_cmd			= usbg_release_cmd,
+	.sess_get_index			= usbg_sess_get_index,
+	.sess_get_initiator_sid		= NULL,
+	.write_pending			= usbg_send_write_request,
+	.set_default_node_attributes	= usbg_set_default_node_attrs,
+	.get_cmd_state			= usbg_get_cmd_state,
+	.queue_data_in			= usbg_send_read_response,
+	.queue_status			= usbg_send_status_response,
+	.queue_tm_rsp			= usbg_queue_tm_rsp,
+	.aborted_task			= usbg_aborted_task,
+	.check_stop_free		= usbg_check_stop_free,
+
+	.fabric_make_wwn		= usbg_make_tport,
+	.fabric_drop_wwn		= usbg_drop_tport,
+	.fabric_make_tpg		= usbg_make_tpg,
+	.fabric_enable_tpg		= usbg_enable_tpg,
+	.fabric_drop_tpg		= usbg_drop_tpg,
+	.fabric_post_link		= usbg_port_link,
+	.fabric_pre_unlink		= usbg_port_unlink,
+	.fabric_init_nodeacl		= usbg_init_nodeacl,
+
+	.tfc_wwn_attrs			= usbg_wwn_attrs,
+	.tfc_tpg_base_attrs		= usbg_base_attrs,
+};
+
+/* Start gadget.c code */
+
+static struct usb_interface_descriptor bot_intf_desc = {
+	.bLength =              sizeof(bot_intf_desc),
+	.bDescriptorType =      USB_DT_INTERFACE,
+	.bNumEndpoints =        2,
+	.bAlternateSetting =	USB_G_ALT_INT_BBB,
+	.bInterfaceClass =      USB_CLASS_MASS_STORAGE,
+	.bInterfaceSubClass =   USB_SC_SCSI,
+	.bInterfaceProtocol =   USB_PR_BULK,
+};
+
+static struct usb_interface_descriptor uasp_intf_desc = {
+	.bLength =		sizeof(uasp_intf_desc),
+	.bDescriptorType =	USB_DT_INTERFACE,
+	.bNumEndpoints =	4,
+	.bAlternateSetting =	USB_G_ALT_INT_UAS,
+	.bInterfaceClass =	USB_CLASS_MASS_STORAGE,
+	.bInterfaceSubClass =	USB_SC_SCSI,
+	.bInterfaceProtocol =	USB_PR_UAS,
+};
+
+static struct usb_endpoint_descriptor uasp_bi_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor uasp_fs_bi_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_pipe_usage_descriptor uasp_bi_pipe_desc = {
+	.bLength =		sizeof(uasp_bi_pipe_desc),
+	.bDescriptorType =	USB_DT_PIPE_USAGE,
+	.bPipeID =		DATA_IN_PIPE_ID,
+};
+
+static struct usb_endpoint_descriptor uasp_ss_bi_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor uasp_bi_ep_comp_desc = {
+	.bLength =		sizeof(uasp_bi_ep_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+	.bMaxBurst =		0,
+	.bmAttributes =		UASP_SS_EP_COMP_LOG_STREAMS,
+	.wBytesPerInterval =	0,
+};
+
+static struct usb_ss_ep_comp_descriptor bot_bi_ep_comp_desc = {
+	.bLength =		sizeof(bot_bi_ep_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+	.bMaxBurst =		0,
+};
+
+static struct usb_endpoint_descriptor uasp_bo_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor uasp_fs_bo_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_pipe_usage_descriptor uasp_bo_pipe_desc = {
+	.bLength =		sizeof(uasp_bo_pipe_desc),
+	.bDescriptorType =	USB_DT_PIPE_USAGE,
+	.bPipeID =		DATA_OUT_PIPE_ID,
+};
+
+static struct usb_endpoint_descriptor uasp_ss_bo_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(0x400),
+};
+
+static struct usb_ss_ep_comp_descriptor uasp_bo_ep_comp_desc = {
+	.bLength =		sizeof(uasp_bo_ep_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+	.bmAttributes =		UASP_SS_EP_COMP_LOG_STREAMS,
+};
+
+static struct usb_ss_ep_comp_descriptor bot_bo_ep_comp_desc = {
+	.bLength =		sizeof(bot_bo_ep_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_endpoint_descriptor uasp_status_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor uasp_fs_status_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_pipe_usage_descriptor uasp_status_pipe_desc = {
+	.bLength =		sizeof(uasp_status_pipe_desc),
+	.bDescriptorType =	USB_DT_PIPE_USAGE,
+	.bPipeID =		STATUS_PIPE_ID,
+};
+
+static struct usb_endpoint_descriptor uasp_ss_status_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor uasp_status_in_ep_comp_desc = {
+	.bLength =		sizeof(uasp_status_in_ep_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+	.bmAttributes =		UASP_SS_EP_COMP_LOG_STREAMS,
+};
+
+static struct usb_endpoint_descriptor uasp_cmd_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor uasp_fs_cmd_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_pipe_usage_descriptor uasp_cmd_pipe_desc = {
+	.bLength =		sizeof(uasp_cmd_pipe_desc),
+	.bDescriptorType =	USB_DT_PIPE_USAGE,
+	.bPipeID =		CMD_PIPE_ID,
+};
+
+static struct usb_endpoint_descriptor uasp_ss_cmd_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor uasp_cmd_comp_desc = {
+	.bLength =		sizeof(uasp_cmd_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_descriptor_header *uasp_fs_function_desc[] = {
+	(struct usb_descriptor_header *) &bot_intf_desc,
+	(struct usb_descriptor_header *) &uasp_fs_bi_desc,
+	(struct usb_descriptor_header *) &uasp_fs_bo_desc,
+
+	(struct usb_descriptor_header *) &uasp_intf_desc,
+	(struct usb_descriptor_header *) &uasp_fs_bi_desc,
+	(struct usb_descriptor_header *) &uasp_bi_pipe_desc,
+	(struct usb_descriptor_header *) &uasp_fs_bo_desc,
+	(struct usb_descriptor_header *) &uasp_bo_pipe_desc,
+	(struct usb_descriptor_header *) &uasp_fs_status_desc,
+	(struct usb_descriptor_header *) &uasp_status_pipe_desc,
+	(struct usb_descriptor_header *) &uasp_fs_cmd_desc,
+	(struct usb_descriptor_header *) &uasp_cmd_pipe_desc,
+	NULL,
+};
+
+static struct usb_descriptor_header *uasp_hs_function_desc[] = {
+	(struct usb_descriptor_header *) &bot_intf_desc,
+	(struct usb_descriptor_header *) &uasp_bi_desc,
+	(struct usb_descriptor_header *) &uasp_bo_desc,
+
+	(struct usb_descriptor_header *) &uasp_intf_desc,
+	(struct usb_descriptor_header *) &uasp_bi_desc,
+	(struct usb_descriptor_header *) &uasp_bi_pipe_desc,
+	(struct usb_descriptor_header *) &uasp_bo_desc,
+	(struct usb_descriptor_header *) &uasp_bo_pipe_desc,
+	(struct usb_descriptor_header *) &uasp_status_desc,
+	(struct usb_descriptor_header *) &uasp_status_pipe_desc,
+	(struct usb_descriptor_header *) &uasp_cmd_desc,
+	(struct usb_descriptor_header *) &uasp_cmd_pipe_desc,
+	NULL,
+};
+
+static struct usb_descriptor_header *uasp_ss_function_desc[] = {
+	(struct usb_descriptor_header *) &bot_intf_desc,
+	(struct usb_descriptor_header *) &uasp_ss_bi_desc,
+	(struct usb_descriptor_header *) &bot_bi_ep_comp_desc,
+	(struct usb_descriptor_header *) &uasp_ss_bo_desc,
+	(struct usb_descriptor_header *) &bot_bo_ep_comp_desc,
+
+	(struct usb_descriptor_header *) &uasp_intf_desc,
+	(struct usb_descriptor_header *) &uasp_ss_bi_desc,
+	(struct usb_descriptor_header *) &uasp_bi_ep_comp_desc,
+	(struct usb_descriptor_header *) &uasp_bi_pipe_desc,
+	(struct usb_descriptor_header *) &uasp_ss_bo_desc,
+	(struct usb_descriptor_header *) &uasp_bo_ep_comp_desc,
+	(struct usb_descriptor_header *) &uasp_bo_pipe_desc,
+	(struct usb_descriptor_header *) &uasp_ss_status_desc,
+	(struct usb_descriptor_header *) &uasp_status_in_ep_comp_desc,
+	(struct usb_descriptor_header *) &uasp_status_pipe_desc,
+	(struct usb_descriptor_header *) &uasp_ss_cmd_desc,
+	(struct usb_descriptor_header *) &uasp_cmd_comp_desc,
+	(struct usb_descriptor_header *) &uasp_cmd_pipe_desc,
+	NULL,
+};
+
+static struct usb_string	tcm_us_strings[] = {
+	[USB_G_STR_INT_UAS].s		= "USB Attached SCSI",
+	[USB_G_STR_INT_BBB].s		= "Bulk Only Transport",
+	{ },
+};
+
+static struct usb_gadget_strings tcm_stringtab = {
+	.language = 0x0409,
+	.strings = tcm_us_strings,
+};
+
+static struct usb_gadget_strings *tcm_strings[] = {
+	&tcm_stringtab,
+	NULL,
+};
+
+static int tcm_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_uas		*fu = to_f_uas(f);
+	struct usb_string	*us;
+	struct usb_gadget	*gadget = c->cdev->gadget;
+	struct usb_ep		*ep;
+	struct f_tcm_opts	*opts;
+	int			iface;
+	int			ret;
+
+	opts = container_of(f->fi, struct f_tcm_opts, func_inst);
+
+	mutex_lock(&opts->dep_lock);
+	if (!opts->can_attach) {
+		mutex_unlock(&opts->dep_lock);
+		return -ENODEV;
+	}
+	mutex_unlock(&opts->dep_lock);
+	us = usb_gstrings_attach(c->cdev, tcm_strings,
+		ARRAY_SIZE(tcm_us_strings));
+	if (IS_ERR(us))
+		return PTR_ERR(us);
+	bot_intf_desc.iInterface = us[USB_G_STR_INT_BBB].id;
+	uasp_intf_desc.iInterface = us[USB_G_STR_INT_UAS].id;
+
+	iface = usb_interface_id(c, f);
+	if (iface < 0)
+		return iface;
+
+	bot_intf_desc.bInterfaceNumber = iface;
+	uasp_intf_desc.bInterfaceNumber = iface;
+	fu->iface = iface;
+	ep = usb_ep_autoconfig_ss(gadget, &uasp_ss_bi_desc,
+			&uasp_bi_ep_comp_desc);
+	if (!ep)
+		goto ep_fail;
+
+	fu->ep_in = ep;
+
+	ep = usb_ep_autoconfig_ss(gadget, &uasp_ss_bo_desc,
+			&uasp_bo_ep_comp_desc);
+	if (!ep)
+		goto ep_fail;
+	fu->ep_out = ep;
+
+	ep = usb_ep_autoconfig_ss(gadget, &uasp_ss_status_desc,
+			&uasp_status_in_ep_comp_desc);
+	if (!ep)
+		goto ep_fail;
+	fu->ep_status = ep;
+
+	ep = usb_ep_autoconfig_ss(gadget, &uasp_ss_cmd_desc,
+			&uasp_cmd_comp_desc);
+	if (!ep)
+		goto ep_fail;
+	fu->ep_cmd = ep;
+
+	/* Assume endpoint addresses are the same for both speeds */
+	uasp_bi_desc.bEndpointAddress =	uasp_ss_bi_desc.bEndpointAddress;
+	uasp_bo_desc.bEndpointAddress = uasp_ss_bo_desc.bEndpointAddress;
+	uasp_status_desc.bEndpointAddress =
+		uasp_ss_status_desc.bEndpointAddress;
+	uasp_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress;
+
+	uasp_fs_bi_desc.bEndpointAddress = uasp_ss_bi_desc.bEndpointAddress;
+	uasp_fs_bo_desc.bEndpointAddress = uasp_ss_bo_desc.bEndpointAddress;
+	uasp_fs_status_desc.bEndpointAddress =
+		uasp_ss_status_desc.bEndpointAddress;
+	uasp_fs_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress;
+
+	ret = usb_assign_descriptors(f, uasp_fs_function_desc,
+			uasp_hs_function_desc, uasp_ss_function_desc,
+			uasp_ss_function_desc);
+	if (ret)
+		goto ep_fail;
+
+	return 0;
+ep_fail:
+	pr_err("Can't claim all required eps\n");
+
+	return -ENOTSUPP;
+}
+
+struct guas_setup_wq {
+	struct work_struct work;
+	struct f_uas *fu;
+	unsigned int alt;
+};
+
+static void tcm_delayed_set_alt(struct work_struct *wq)
+{
+	struct guas_setup_wq *work = container_of(wq, struct guas_setup_wq,
+			work);
+	struct f_uas *fu = work->fu;
+	int alt = work->alt;
+
+	kfree(work);
+
+	if (fu->flags & USBG_IS_BOT)
+		bot_cleanup_old_alt(fu);
+	if (fu->flags & USBG_IS_UAS)
+		uasp_cleanup_old_alt(fu);
+
+	if (alt == USB_G_ALT_INT_BBB)
+		bot_set_alt(fu);
+	else if (alt == USB_G_ALT_INT_UAS)
+		uasp_set_alt(fu);
+	usb_composite_setup_continue(fu->function.config->cdev);
+}
+
+static int tcm_get_alt(struct usb_function *f, unsigned intf)
+{
+	if (intf == bot_intf_desc.bInterfaceNumber)
+		return USB_G_ALT_INT_BBB;
+	if (intf == uasp_intf_desc.bInterfaceNumber)
+		return USB_G_ALT_INT_UAS;
+
+	return -EOPNOTSUPP;
+}
+
+static int tcm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_uas *fu = to_f_uas(f);
+
+	if ((alt == USB_G_ALT_INT_BBB) || (alt == USB_G_ALT_INT_UAS)) {
+		struct guas_setup_wq *work;
+
+		work = kmalloc(sizeof(*work), GFP_ATOMIC);
+		if (!work)
+			return -ENOMEM;
+		INIT_WORK(&work->work, tcm_delayed_set_alt);
+		work->fu = fu;
+		work->alt = alt;
+		schedule_work(&work->work);
+		return USB_GADGET_DELAYED_STATUS;
+	}
+	return -EOPNOTSUPP;
+}
+
+static void tcm_disable(struct usb_function *f)
+{
+	struct f_uas *fu = to_f_uas(f);
+
+	if (fu->flags & USBG_IS_UAS)
+		uasp_cleanup_old_alt(fu);
+	else if (fu->flags & USBG_IS_BOT)
+		bot_cleanup_old_alt(fu);
+	fu->flags = 0;
+}
+
+static int tcm_setup(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct f_uas *fu = to_f_uas(f);
+
+	if (!(fu->flags & USBG_IS_BOT))
+		return -EOPNOTSUPP;
+
+	return usbg_bot_setup(f, ctrl);
+}
+
+static inline struct f_tcm_opts *to_f_tcm_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_tcm_opts,
+		func_inst.group);
+}
+
+static void tcm_attr_release(struct config_item *item)
+{
+	struct f_tcm_opts *opts = to_f_tcm_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations tcm_item_ops = {
+	.release		= tcm_attr_release,
+};
+
+static const struct config_item_type tcm_func_type = {
+	.ct_item_ops	= &tcm_item_ops,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void tcm_free_inst(struct usb_function_instance *f)
+{
+	struct f_tcm_opts *opts;
+	unsigned i;
+
+	opts = container_of(f, struct f_tcm_opts, func_inst);
+
+	mutex_lock(&tpg_instances_lock);
+	for (i = 0; i < TPG_INSTANCES; ++i)
+		if (tpg_instances[i].func_inst == f)
+			break;
+	if (i < TPG_INSTANCES)
+		tpg_instances[i].func_inst = NULL;
+	mutex_unlock(&tpg_instances_lock);
+
+	kfree(opts);
+}
+
+static int tcm_register_callback(struct usb_function_instance *f)
+{
+	struct f_tcm_opts *opts = container_of(f, struct f_tcm_opts, func_inst);
+
+	mutex_lock(&opts->dep_lock);
+	opts->can_attach = true;
+	mutex_unlock(&opts->dep_lock);
+
+	return 0;
+}
+
+static void tcm_unregister_callback(struct usb_function_instance *f)
+{
+	struct f_tcm_opts *opts = container_of(f, struct f_tcm_opts, func_inst);
+
+	mutex_lock(&opts->dep_lock);
+	unregister_gadget_item(opts->
+		func_inst.group.cg_item.ci_parent->ci_parent);
+	opts->can_attach = false;
+	mutex_unlock(&opts->dep_lock);
+}
+
+static int usbg_attach(struct usbg_tpg *tpg)
+{
+	struct usb_function_instance *f = tpg->fi;
+	struct f_tcm_opts *opts = container_of(f, struct f_tcm_opts, func_inst);
+
+	if (opts->tcm_register_callback)
+		return opts->tcm_register_callback(f);
+
+	return 0;
+}
+
+static void usbg_detach(struct usbg_tpg *tpg)
+{
+	struct usb_function_instance *f = tpg->fi;
+	struct f_tcm_opts *opts = container_of(f, struct f_tcm_opts, func_inst);
+
+	if (opts->tcm_unregister_callback)
+		opts->tcm_unregister_callback(f);
+}
+
+static int tcm_set_name(struct usb_function_instance *f, const char *name)
+{
+	struct f_tcm_opts *opts = container_of(f, struct f_tcm_opts, func_inst);
+
+	pr_debug("tcm: Activating %s\n", name);
+
+	mutex_lock(&opts->dep_lock);
+	opts->ready = true;
+	mutex_unlock(&opts->dep_lock);
+
+	return 0;
+}
+
+static struct usb_function_instance *tcm_alloc_inst(void)
+{
+	struct f_tcm_opts *opts;
+	int i;
+
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_lock(&tpg_instances_lock);
+	for (i = 0; i < TPG_INSTANCES; ++i)
+		if (!tpg_instances[i].func_inst)
+			break;
+
+	if (i == TPG_INSTANCES) {
+		mutex_unlock(&tpg_instances_lock);
+		kfree(opts);
+		return ERR_PTR(-EBUSY);
+	}
+	tpg_instances[i].func_inst = &opts->func_inst;
+	mutex_unlock(&tpg_instances_lock);
+
+	mutex_init(&opts->dep_lock);
+	opts->func_inst.set_inst_name = tcm_set_name;
+	opts->func_inst.free_func_inst = tcm_free_inst;
+	opts->tcm_register_callback = tcm_register_callback;
+	opts->tcm_unregister_callback = tcm_unregister_callback;
+
+	config_group_init_type_name(&opts->func_inst.group, "",
+			&tcm_func_type);
+
+	return &opts->func_inst;
+}
+
+static void tcm_free(struct usb_function *f)
+{
+	struct f_uas *tcm = to_f_uas(f);
+
+	kfree(tcm);
+}
+
+static void tcm_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	usb_free_all_descriptors(f);
+}
+
+static struct usb_function *tcm_alloc(struct usb_function_instance *fi)
+{
+	struct f_uas *fu;
+	unsigned i;
+
+	mutex_lock(&tpg_instances_lock);
+	for (i = 0; i < TPG_INSTANCES; ++i)
+		if (tpg_instances[i].func_inst == fi)
+			break;
+	if (i == TPG_INSTANCES) {
+		mutex_unlock(&tpg_instances_lock);
+		return ERR_PTR(-ENODEV);
+	}
+
+	fu = kzalloc(sizeof(*fu), GFP_KERNEL);
+	if (!fu) {
+		mutex_unlock(&tpg_instances_lock);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	fu->function.name = "Target Function";
+	fu->function.bind = tcm_bind;
+	fu->function.unbind = tcm_unbind;
+	fu->function.set_alt = tcm_set_alt;
+	fu->function.get_alt = tcm_get_alt;
+	fu->function.setup = tcm_setup;
+	fu->function.disable = tcm_disable;
+	fu->function.free_func = tcm_free;
+	fu->tpg = tpg_instances[i].tpg;
+	mutex_unlock(&tpg_instances_lock);
+
+	return &fu->function;
+}
+
+DECLARE_USB_FUNCTION(tcm, tcm_alloc_inst, tcm_alloc);
+
+static int __init tcm_init(void)
+{
+	int ret;
+
+	ret = usb_function_register(&tcmusb_func);
+	if (ret)
+		return ret;
+
+	ret = target_register_template(&usbg_ops);
+	if (ret)
+		usb_function_unregister(&tcmusb_func);
+
+	return ret;
+}
+module_init(tcm_init);
+
+static void __exit tcm_exit(void)
+{
+	target_unregister_template(&usbg_ops);
+	usb_function_unregister(&tcmusb_func);
+}
+module_exit(tcm_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sebastian Andrzej Siewior");
diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c
new file mode 100644
index 000000000..6f0e1d803
--- /dev/null
+++ b/drivers/usb/gadget/function/f_uac1.c
@@ -0,0 +1,1754 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_uac1.c -- USB Audio Class 1.0 Function (using u_audio API)
+ *
+ * Copyright (C) 2016 Ruslan Bilovol <ruslan.bilovol@gmail.com>
+ * Copyright (C) 2021 Julian Scheel <julian@jusst.de>
+ *
+ * This driver doesn't expect any real Audio codec to be present
+ * on the device - the audio streams are simply sinked to and
+ * sourced from a virtual ALSA sound card created.
+ *
+ * This file is based on f_uac1.c which is
+ *   Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ *   Copyright (C) 2008 Analog Devices, Inc
+ */
+
+#include <linux/usb/audio.h>
+#include <linux/module.h>
+
+#include "u_audio.h"
+#include "u_uac1.h"
+
+/* UAC1 spec: 3.7.2.3 Audio Channel Cluster Format */
+#define UAC1_CHANNEL_MASK 0x0FFF
+
+#define USB_OUT_FU_ID	(out_feature_unit_desc->bUnitID)
+#define USB_IN_FU_ID	(in_feature_unit_desc->bUnitID)
+
+#define EPIN_EN(_opts) ((_opts)->p_chmask != 0)
+#define EPOUT_EN(_opts) ((_opts)->c_chmask != 0)
+#define FUIN_EN(_opts) ((_opts)->p_mute_present \
+			|| (_opts)->p_volume_present)
+#define FUOUT_EN(_opts) ((_opts)->c_mute_present \
+			|| (_opts)->c_volume_present)
+
+struct f_uac1 {
+	struct g_audio g_audio;
+	u8 ac_intf, as_in_intf, as_out_intf;
+	u8 ac_alt, as_in_alt, as_out_alt;	/* needed for get_alt() */
+
+	struct usb_ctrlrequest setup_cr;	/* will be used in data stage */
+
+	/* Interrupt IN endpoint of AC interface */
+	struct usb_ep	*int_ep;
+	atomic_t	int_count;
+	int ctl_id;		/* EP id */
+	int c_srate;	/* current capture srate */
+	int p_srate;	/* current playback prate */
+};
+
+static inline struct f_uac1 *func_to_uac1(struct usb_function *f)
+{
+	return container_of(f, struct f_uac1, g_audio.func);
+}
+
+static inline struct f_uac1_opts *g_audio_to_uac1_opts(struct g_audio *audio)
+{
+	return container_of(audio->func.fi, struct f_uac1_opts, func_inst);
+}
+
+/*
+ * DESCRIPTORS ... most are static, but strings and full
+ * configuration descriptors are built on demand.
+ */
+
+/*
+ * We have three interfaces - one AudioControl and two AudioStreaming
+ *
+ * The driver implements a simple UAC_1 topology.
+ * USB-OUT -> IT_1 -> OT_2 -> ALSA_Capture
+ * ALSA_Playback -> IT_3 -> OT_4 -> USB-IN
+ */
+
+/* B.3.1  Standard AC Interface Descriptor */
+static struct usb_interface_descriptor ac_interface_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	/* .bNumEndpoints =	DYNAMIC */
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOCONTROL,
+};
+
+/* B.3.2  Class-Specific AC Interface Descriptor */
+static struct uac1_ac_header_descriptor *ac_header_desc;
+
+static struct uac_input_terminal_descriptor usb_out_it_desc = {
+	.bLength =		UAC_DT_INPUT_TERMINAL_SIZE,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	UAC_INPUT_TERMINAL,
+	/* .bTerminalID =	DYNAMIC */
+	.wTerminalType =	cpu_to_le16(UAC_TERMINAL_STREAMING),
+	.bAssocTerminal =	0,
+	.wChannelConfig =	cpu_to_le16(0x3),
+};
+
+static struct uac1_output_terminal_descriptor io_out_ot_desc = {
+	.bLength		= UAC_DT_OUTPUT_TERMINAL_SIZE,
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype	= UAC_OUTPUT_TERMINAL,
+	/* .bTerminalID =	DYNAMIC */
+	.wTerminalType		= cpu_to_le16(UAC_OUTPUT_TERMINAL_SPEAKER),
+	.bAssocTerminal		= 0,
+	/* .bSourceID =		DYNAMIC */
+};
+
+static struct uac_input_terminal_descriptor io_in_it_desc = {
+	.bLength		= UAC_DT_INPUT_TERMINAL_SIZE,
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype	= UAC_INPUT_TERMINAL,
+	/* .bTerminalID		= DYNAMIC */
+	.wTerminalType		= cpu_to_le16(UAC_INPUT_TERMINAL_MICROPHONE),
+	.bAssocTerminal		= 0,
+	.wChannelConfig		= cpu_to_le16(0x3),
+};
+
+static struct uac1_output_terminal_descriptor usb_in_ot_desc = {
+	.bLength =		UAC_DT_OUTPUT_TERMINAL_SIZE,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	UAC_OUTPUT_TERMINAL,
+	/* .bTerminalID =	DYNAMIC */
+	.wTerminalType =	cpu_to_le16(UAC_TERMINAL_STREAMING),
+	.bAssocTerminal =	0,
+	/* .bSourceID =		DYNAMIC */
+};
+
+static struct uac_feature_unit_descriptor *in_feature_unit_desc;
+static struct uac_feature_unit_descriptor *out_feature_unit_desc;
+
+/* AC IN Interrupt Endpoint */
+static struct usb_endpoint_descriptor ac_int_ep_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+	.bEndpointAddress = USB_DIR_IN,
+	.bmAttributes = USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize = cpu_to_le16(2),
+	.bInterval = 4,
+};
+
+/* B.4.1  Standard AS Interface Descriptor */
+static struct usb_interface_descriptor as_out_interface_alt_0_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	.bAlternateSetting =	0,
+	.bNumEndpoints =	0,
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOSTREAMING,
+};
+
+static struct usb_interface_descriptor as_out_interface_alt_1_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	.bAlternateSetting =	1,
+	.bNumEndpoints =	1,
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOSTREAMING,
+};
+
+static struct usb_interface_descriptor as_in_interface_alt_0_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	.bAlternateSetting =	0,
+	.bNumEndpoints =	0,
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOSTREAMING,
+};
+
+static struct usb_interface_descriptor as_in_interface_alt_1_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	.bAlternateSetting =	1,
+	.bNumEndpoints =	1,
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOSTREAMING,
+};
+
+/* B.4.2  Class-Specific AS Interface Descriptor */
+static struct uac1_as_header_descriptor as_out_header_desc = {
+	.bLength =		UAC_DT_AS_HEADER_SIZE,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	UAC_AS_GENERAL,
+	/* .bTerminalLink =	DYNAMIC */
+	.bDelay =		1,
+	.wFormatTag =		cpu_to_le16(UAC_FORMAT_TYPE_I_PCM),
+};
+
+static struct uac1_as_header_descriptor as_in_header_desc = {
+	.bLength =		UAC_DT_AS_HEADER_SIZE,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	UAC_AS_GENERAL,
+	/* .bTerminalLink =	DYNAMIC */
+	.bDelay =		1,
+	.wFormatTag =		cpu_to_le16(UAC_FORMAT_TYPE_I_PCM),
+};
+
+DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(UAC_MAX_RATES);
+#define uac_format_type_i_discrete_descriptor			\
+	uac_format_type_i_discrete_descriptor_##UAC_MAX_RATES
+
+static struct uac_format_type_i_discrete_descriptor as_out_type_i_desc = {
+	.bLength =		0, /* filled on rate setup */
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	UAC_FORMAT_TYPE,
+	.bFormatType =		UAC_FORMAT_TYPE_I,
+	.bSubframeSize =	2,
+	.bBitResolution =	16,
+	.bSamFreqType =		0, /* filled on rate setup */
+};
+
+/* Standard ISO OUT Endpoint Descriptor */
+static struct usb_endpoint_descriptor as_out_ep_desc  = {
+	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_SYNC_ADAPTIVE
+				| USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize	=	cpu_to_le16(UAC1_OUT_EP_MAX_PACKET_SIZE),
+	.bInterval =		4,
+};
+
+/* Class-specific AS ISO OUT Endpoint Descriptor */
+static struct uac_iso_endpoint_descriptor as_iso_out_desc = {
+	.bLength =		UAC_ISO_ENDPOINT_DESC_SIZE,
+	.bDescriptorType =	USB_DT_CS_ENDPOINT,
+	.bDescriptorSubtype =	UAC_EP_GENERAL,
+	.bmAttributes =		1,
+	.bLockDelayUnits =	1,
+	.wLockDelay =		cpu_to_le16(1),
+};
+
+static struct uac_format_type_i_discrete_descriptor as_in_type_i_desc = {
+	.bLength =		0, /* filled on rate setup */
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	UAC_FORMAT_TYPE,
+	.bFormatType =		UAC_FORMAT_TYPE_I,
+	.bSubframeSize =	2,
+	.bBitResolution =	16,
+	.bSamFreqType =		0, /* filled on rate setup */
+};
+
+/* Standard ISO OUT Endpoint Descriptor */
+static struct usb_endpoint_descriptor as_in_ep_desc  = {
+	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_SYNC_ASYNC
+				| USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize	=	cpu_to_le16(UAC1_OUT_EP_MAX_PACKET_SIZE),
+	.bInterval =		4,
+};
+
+/* Class-specific AS ISO OUT Endpoint Descriptor */
+static struct uac_iso_endpoint_descriptor as_iso_in_desc = {
+	.bLength =		UAC_ISO_ENDPOINT_DESC_SIZE,
+	.bDescriptorType =	USB_DT_CS_ENDPOINT,
+	.bDescriptorSubtype =	UAC_EP_GENERAL,
+	.bmAttributes =		1,
+	.bLockDelayUnits =	0,
+	.wLockDelay =		0,
+};
+
+static struct usb_descriptor_header *f_audio_desc[] = {
+	(struct usb_descriptor_header *)&ac_interface_desc,
+	(struct usb_descriptor_header *)&ac_header_desc,
+
+	(struct usb_descriptor_header *)&usb_out_it_desc,
+	(struct usb_descriptor_header *)&io_out_ot_desc,
+	(struct usb_descriptor_header *)&out_feature_unit_desc,
+
+	(struct usb_descriptor_header *)&io_in_it_desc,
+	(struct usb_descriptor_header *)&usb_in_ot_desc,
+	(struct usb_descriptor_header *)&in_feature_unit_desc,
+
+	(struct usb_descriptor_header *)&ac_int_ep_desc,
+
+	(struct usb_descriptor_header *)&as_out_interface_alt_0_desc,
+	(struct usb_descriptor_header *)&as_out_interface_alt_1_desc,
+	(struct usb_descriptor_header *)&as_out_header_desc,
+
+	(struct usb_descriptor_header *)&as_out_type_i_desc,
+
+	(struct usb_descriptor_header *)&as_out_ep_desc,
+	(struct usb_descriptor_header *)&as_iso_out_desc,
+
+	(struct usb_descriptor_header *)&as_in_interface_alt_0_desc,
+	(struct usb_descriptor_header *)&as_in_interface_alt_1_desc,
+	(struct usb_descriptor_header *)&as_in_header_desc,
+
+	(struct usb_descriptor_header *)&as_in_type_i_desc,
+
+	(struct usb_descriptor_header *)&as_in_ep_desc,
+	(struct usb_descriptor_header *)&as_iso_in_desc,
+	NULL,
+};
+
+enum {
+	STR_AC_IF,
+	STR_USB_OUT_IT,
+	STR_USB_OUT_IT_CH_NAMES,
+	STR_IO_OUT_OT,
+	STR_IO_IN_IT,
+	STR_IO_IN_IT_CH_NAMES,
+	STR_USB_IN_OT,
+	STR_FU_IN,
+	STR_FU_OUT,
+	STR_AS_OUT_IF_ALT0,
+	STR_AS_OUT_IF_ALT1,
+	STR_AS_IN_IF_ALT0,
+	STR_AS_IN_IF_ALT1,
+};
+
+static struct usb_string strings_uac1[] = {
+	/* [STR_AC_IF].s = DYNAMIC, */
+	[STR_USB_OUT_IT].s = "Playback Input terminal",
+	[STR_USB_OUT_IT_CH_NAMES].s = "Playback Channels",
+	[STR_IO_OUT_OT].s = "Playback Output terminal",
+	[STR_IO_IN_IT].s = "Capture Input terminal",
+	[STR_IO_IN_IT_CH_NAMES].s = "Capture Channels",
+	[STR_USB_IN_OT].s = "Capture Output terminal",
+	[STR_FU_IN].s = "Capture Volume",
+	[STR_FU_OUT].s = "Playback Volume",
+	[STR_AS_OUT_IF_ALT0].s = "Playback Inactive",
+	[STR_AS_OUT_IF_ALT1].s = "Playback Active",
+	[STR_AS_IN_IF_ALT0].s = "Capture Inactive",
+	[STR_AS_IN_IF_ALT1].s = "Capture Active",
+	{ },
+};
+
+static struct usb_gadget_strings str_uac1 = {
+	.language = 0x0409,	/* en-us */
+	.strings = strings_uac1,
+};
+
+static struct usb_gadget_strings *uac1_strings[] = {
+	&str_uac1,
+	NULL,
+};
+
+/*
+ * This function is an ALSA sound card following USB Audio Class Spec 1.0.
+ */
+
+static void uac_cs_attr_sample_rate(struct usb_ep *ep, struct usb_request *req)
+{
+	struct usb_function *fn = ep->driver_data;
+	struct usb_composite_dev *cdev = fn->config->cdev;
+	struct g_audio *agdev = func_to_g_audio(fn);
+	struct f_uac1 *uac1 = func_to_uac1(fn);
+	u8 *buf = (u8 *)req->buf;
+	u32 val = 0;
+
+	if (req->actual != 3) {
+		WARN(cdev, "Invalid data size for UAC_EP_CS_ATTR_SAMPLE_RATE.\n");
+		return;
+	}
+
+	val = buf[0] | (buf[1] << 8) | (buf[2] << 16);
+	if (uac1->ctl_id == (USB_DIR_IN | 2)) {
+		uac1->p_srate = val;
+		u_audio_set_playback_srate(agdev, uac1->p_srate);
+	} else if (uac1->ctl_id == (USB_DIR_OUT | 1)) {
+		uac1->c_srate = val;
+		u_audio_set_capture_srate(agdev, uac1->c_srate);
+	}
+}
+
+static void audio_notify_complete(struct usb_ep *_ep, struct usb_request *req)
+{
+	struct g_audio *audio = req->context;
+	struct f_uac1 *uac1 = func_to_uac1(&audio->func);
+
+	atomic_dec(&uac1->int_count);
+	kfree(req->buf);
+	usb_ep_free_request(_ep, req);
+}
+
+static int audio_notify(struct g_audio *audio, int unit_id, int cs)
+{
+	struct f_uac1 *uac1 = func_to_uac1(&audio->func);
+	struct usb_request *req;
+	struct uac1_status_word *msg;
+	int ret;
+
+	if (!uac1->int_ep->enabled)
+		return 0;
+
+	if (atomic_inc_return(&uac1->int_count) > UAC1_DEF_INT_REQ_NUM) {
+		atomic_dec(&uac1->int_count);
+		return 0;
+	}
+
+	req = usb_ep_alloc_request(uac1->int_ep, GFP_ATOMIC);
+	if (req == NULL) {
+		ret = -ENOMEM;
+		goto err_dec_int_count;
+	}
+
+	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (msg == NULL) {
+		ret = -ENOMEM;
+		goto err_free_request;
+	}
+
+	msg->bStatusType = UAC1_STATUS_TYPE_IRQ_PENDING
+				| UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF;
+	msg->bOriginator = unit_id;
+
+	req->length = sizeof(*msg);
+	req->buf = msg;
+	req->context = audio;
+	req->complete = audio_notify_complete;
+
+	ret = usb_ep_queue(uac1->int_ep, req, GFP_ATOMIC);
+
+	if (ret)
+		goto err_free_msg;
+
+	return 0;
+
+err_free_msg:
+	kfree(msg);
+err_free_request:
+	usb_ep_free_request(uac1->int_ep, req);
+err_dec_int_count:
+	atomic_dec(&uac1->int_count);
+
+	return ret;
+}
+
+static int
+in_rq_cur(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+	struct usb_request *req = fn->config->cdev->req;
+	struct g_audio *audio = func_to_g_audio(fn);
+	struct f_uac1_opts *opts = g_audio_to_uac1_opts(audio);
+	u16 w_length = le16_to_cpu(cr->wLength);
+	u16 w_index = le16_to_cpu(cr->wIndex);
+	u16 w_value = le16_to_cpu(cr->wValue);
+	u8 entity_id = (w_index >> 8) & 0xff;
+	u8 control_selector = w_value >> 8;
+	int value = -EOPNOTSUPP;
+
+	if ((FUIN_EN(opts) && (entity_id == USB_IN_FU_ID)) ||
+			(FUOUT_EN(opts) && (entity_id == USB_OUT_FU_ID))) {
+		unsigned int is_playback = 0;
+
+		if (FUIN_EN(opts) && (entity_id == USB_IN_FU_ID))
+			is_playback = 1;
+
+		if (control_selector == UAC_FU_MUTE) {
+			unsigned int mute;
+
+			u_audio_get_mute(audio, is_playback, &mute);
+
+			*(u8 *)req->buf = mute;
+			value = min_t(unsigned int, w_length, 1);
+		} else if (control_selector == UAC_FU_VOLUME) {
+			__le16 c;
+			s16 volume;
+
+			u_audio_get_volume(audio, is_playback, &volume);
+
+			c = cpu_to_le16(volume);
+
+			value = min_t(unsigned int, w_length, sizeof(c));
+			memcpy(req->buf, &c, value);
+		} else {
+			dev_err(&audio->gadget->dev,
+				"%s:%d control_selector=%d TODO!\n",
+				__func__, __LINE__, control_selector);
+		}
+	} else {
+		dev_err(&audio->gadget->dev,
+			"%s:%d entity_id=%d control_selector=%d TODO!\n",
+			__func__, __LINE__, entity_id, control_selector);
+	}
+
+	return value;
+}
+
+static int
+in_rq_min(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+	struct usb_request *req = fn->config->cdev->req;
+	struct g_audio *audio = func_to_g_audio(fn);
+	struct f_uac1_opts *opts = g_audio_to_uac1_opts(audio);
+	u16 w_length = le16_to_cpu(cr->wLength);
+	u16 w_index = le16_to_cpu(cr->wIndex);
+	u16 w_value = le16_to_cpu(cr->wValue);
+	u8 entity_id = (w_index >> 8) & 0xff;
+	u8 control_selector = w_value >> 8;
+	int value = -EOPNOTSUPP;
+
+	if ((FUIN_EN(opts) && (entity_id == USB_IN_FU_ID)) ||
+			(FUOUT_EN(opts) && (entity_id == USB_OUT_FU_ID))) {
+		unsigned int is_playback = 0;
+
+		if (FUIN_EN(opts) && (entity_id == USB_IN_FU_ID))
+			is_playback = 1;
+
+		if (control_selector == UAC_FU_VOLUME) {
+			__le16 r;
+			s16 min_db;
+
+			if (is_playback)
+				min_db = opts->p_volume_min;
+			else
+				min_db = opts->c_volume_min;
+
+			r = cpu_to_le16(min_db);
+
+			value = min_t(unsigned int, w_length, sizeof(r));
+			memcpy(req->buf, &r, value);
+		} else {
+			dev_err(&audio->gadget->dev,
+				"%s:%d control_selector=%d TODO!\n",
+				__func__, __LINE__, control_selector);
+		}
+	} else {
+		dev_err(&audio->gadget->dev,
+			"%s:%d entity_id=%d control_selector=%d TODO!\n",
+			__func__, __LINE__, entity_id, control_selector);
+	}
+
+	return value;
+}
+
+static int
+in_rq_max(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+	struct usb_request *req = fn->config->cdev->req;
+	struct g_audio *audio = func_to_g_audio(fn);
+	struct f_uac1_opts *opts = g_audio_to_uac1_opts(audio);
+	u16 w_length = le16_to_cpu(cr->wLength);
+	u16 w_index = le16_to_cpu(cr->wIndex);
+	u16 w_value = le16_to_cpu(cr->wValue);
+	u8 entity_id = (w_index >> 8) & 0xff;
+	u8 control_selector = w_value >> 8;
+	int value = -EOPNOTSUPP;
+
+	if ((FUIN_EN(opts) && (entity_id == USB_IN_FU_ID)) ||
+			(FUOUT_EN(opts) && (entity_id == USB_OUT_FU_ID))) {
+		unsigned int is_playback = 0;
+
+		if (FUIN_EN(opts) && (entity_id == USB_IN_FU_ID))
+			is_playback = 1;
+
+		if (control_selector == UAC_FU_VOLUME) {
+			__le16 r;
+			s16 max_db;
+
+			if (is_playback)
+				max_db = opts->p_volume_max;
+			else
+				max_db = opts->c_volume_max;
+
+			r = cpu_to_le16(max_db);
+
+			value = min_t(unsigned int, w_length, sizeof(r));
+			memcpy(req->buf, &r, value);
+		} else {
+			dev_err(&audio->gadget->dev,
+				"%s:%d control_selector=%d TODO!\n",
+				__func__, __LINE__, control_selector);
+		}
+	} else {
+		dev_err(&audio->gadget->dev,
+			"%s:%d entity_id=%d control_selector=%d TODO!\n",
+			__func__, __LINE__, entity_id, control_selector);
+	}
+
+	return value;
+}
+
+static int
+in_rq_res(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+	struct usb_request *req = fn->config->cdev->req;
+	struct g_audio *audio = func_to_g_audio(fn);
+	struct f_uac1_opts *opts = g_audio_to_uac1_opts(audio);
+	u16 w_length = le16_to_cpu(cr->wLength);
+	u16 w_index = le16_to_cpu(cr->wIndex);
+	u16 w_value = le16_to_cpu(cr->wValue);
+	u8 entity_id = (w_index >> 8) & 0xff;
+	u8 control_selector = w_value >> 8;
+	int value = -EOPNOTSUPP;
+
+	if ((FUIN_EN(opts) && (entity_id == USB_IN_FU_ID)) ||
+			(FUOUT_EN(opts) && (entity_id == USB_OUT_FU_ID))) {
+		unsigned int is_playback = 0;
+
+		if (FUIN_EN(opts) && (entity_id == USB_IN_FU_ID))
+			is_playback = 1;
+
+		if (control_selector == UAC_FU_VOLUME) {
+			__le16 r;
+			s16 res_db;
+
+			if (is_playback)
+				res_db = opts->p_volume_res;
+			else
+				res_db = opts->c_volume_res;
+
+			r = cpu_to_le16(res_db);
+
+			value = min_t(unsigned int, w_length, sizeof(r));
+			memcpy(req->buf, &r, value);
+		} else {
+			dev_err(&audio->gadget->dev,
+				"%s:%d control_selector=%d TODO!\n",
+				__func__, __LINE__, control_selector);
+		}
+	} else {
+		dev_err(&audio->gadget->dev,
+			"%s:%d entity_id=%d control_selector=%d TODO!\n",
+			__func__, __LINE__, entity_id, control_selector);
+	}
+
+	return value;
+}
+
+static void
+out_rq_cur_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct g_audio *audio = req->context;
+	struct usb_composite_dev *cdev = audio->func.config->cdev;
+	struct f_uac1_opts *opts = g_audio_to_uac1_opts(audio);
+	struct f_uac1 *uac1 = func_to_uac1(&audio->func);
+	struct usb_ctrlrequest *cr = &uac1->setup_cr;
+	u16 w_index = le16_to_cpu(cr->wIndex);
+	u16 w_value = le16_to_cpu(cr->wValue);
+	u8 entity_id = (w_index >> 8) & 0xff;
+	u8 control_selector = w_value >> 8;
+
+	if (req->status != 0) {
+		dev_dbg(&cdev->gadget->dev, "completion err %d\n", req->status);
+		return;
+	}
+
+	if ((FUIN_EN(opts) && (entity_id == USB_IN_FU_ID)) ||
+			(FUOUT_EN(opts) && (entity_id == USB_OUT_FU_ID))) {
+		unsigned int is_playback = 0;
+
+		if (FUIN_EN(opts) && (entity_id == USB_IN_FU_ID))
+			is_playback = 1;
+
+		if (control_selector == UAC_FU_MUTE) {
+			u8 mute = *(u8 *)req->buf;
+
+			u_audio_set_mute(audio, is_playback, mute);
+
+			return;
+		} else if (control_selector == UAC_FU_VOLUME) {
+			__le16 *c = req->buf;
+			s16 volume;
+
+			volume = le16_to_cpu(*c);
+			u_audio_set_volume(audio, is_playback, volume);
+
+			return;
+		} else {
+			dev_err(&audio->gadget->dev,
+				"%s:%d control_selector=%d TODO!\n",
+				__func__, __LINE__, control_selector);
+			usb_ep_set_halt(ep);
+		}
+	} else {
+		dev_err(&audio->gadget->dev,
+			"%s:%d entity_id=%d control_selector=%d TODO!\n",
+			__func__, __LINE__, entity_id, control_selector);
+		usb_ep_set_halt(ep);
+
+	}
+}
+
+static int
+out_rq_cur(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+	struct usb_request *req = fn->config->cdev->req;
+	struct g_audio *audio = func_to_g_audio(fn);
+	struct f_uac1_opts *opts = g_audio_to_uac1_opts(audio);
+	struct f_uac1 *uac1 = func_to_uac1(&audio->func);
+	u16 w_length = le16_to_cpu(cr->wLength);
+	u16 w_index = le16_to_cpu(cr->wIndex);
+	u16 w_value = le16_to_cpu(cr->wValue);
+	u8 entity_id = (w_index >> 8) & 0xff;
+	u8 control_selector = w_value >> 8;
+
+	if ((FUIN_EN(opts) && (entity_id == USB_IN_FU_ID)) ||
+			(FUOUT_EN(opts) && (entity_id == USB_OUT_FU_ID))) {
+		memcpy(&uac1->setup_cr, cr, sizeof(*cr));
+		req->context = audio;
+		req->complete = out_rq_cur_complete;
+
+		return w_length;
+	} else {
+		dev_err(&audio->gadget->dev,
+			"%s:%d entity_id=%d control_selector=%d TODO!\n",
+			__func__, __LINE__, entity_id, control_selector);
+	}
+	return -EOPNOTSUPP;
+}
+
+static int ac_rq_in(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev *cdev = f->config->cdev;
+	int value = -EOPNOTSUPP;
+	u8 ep = ((le16_to_cpu(ctrl->wIndex) >> 8) & 0xFF);
+	u16 len = le16_to_cpu(ctrl->wLength);
+	u16 w_value = le16_to_cpu(ctrl->wValue);
+
+	DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, endpoint %d\n",
+			ctrl->bRequest, w_value, len, ep);
+
+	switch (ctrl->bRequest) {
+	case UAC_GET_CUR:
+		return in_rq_cur(f, ctrl);
+	case UAC_GET_MIN:
+		return in_rq_min(f, ctrl);
+	case UAC_GET_MAX:
+		return in_rq_max(f, ctrl);
+	case UAC_GET_RES:
+		return in_rq_res(f, ctrl);
+	case UAC_GET_MEM:
+		break;
+	case UAC_GET_STAT:
+		value = len;
+		break;
+	default:
+		break;
+	}
+
+	return value;
+}
+
+static int audio_set_endpoint_req(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = f->config->cdev->req;
+	struct f_uac1		*uac1 = func_to_uac1(f);
+	int			value = -EOPNOTSUPP;
+	u16			ep = le16_to_cpu(ctrl->wIndex);
+	u16			len = le16_to_cpu(ctrl->wLength);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u8			cs = w_value >> 8;
+
+	DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, endpoint %d\n",
+			ctrl->bRequest, w_value, len, ep);
+
+	switch (ctrl->bRequest) {
+	case UAC_SET_CUR: {
+		if (cs == UAC_EP_CS_ATTR_SAMPLE_RATE) {
+			cdev->gadget->ep0->driver_data = f;
+			uac1->ctl_id = ep;
+			req->complete = uac_cs_attr_sample_rate;
+		}
+		value = len;
+		break;
+	}
+
+	case UAC_SET_MIN:
+		break;
+
+	case UAC_SET_MAX:
+		break;
+
+	case UAC_SET_RES:
+		break;
+
+	case UAC_SET_MEM:
+		break;
+
+	default:
+		break;
+	}
+
+	return value;
+}
+
+static int audio_get_endpoint_req(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request *req = f->config->cdev->req;
+	struct f_uac1 *uac1 = func_to_uac1(f);
+	u8 *buf = (u8 *)req->buf;
+	int value = -EOPNOTSUPP;
+	u8 ep = le16_to_cpu(ctrl->wIndex);
+	u16 len = le16_to_cpu(ctrl->wLength);
+	u16 w_value = le16_to_cpu(ctrl->wValue);
+	u8 cs = w_value >> 8;
+	u32 val = 0;
+
+	DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, endpoint %d\n",
+			ctrl->bRequest, w_value, len, ep);
+
+	switch (ctrl->bRequest) {
+	case UAC_GET_CUR: {
+		if (cs == UAC_EP_CS_ATTR_SAMPLE_RATE) {
+			if (ep == (USB_DIR_IN | 2))
+				val = uac1->p_srate;
+			else if (ep == (USB_DIR_OUT | 1))
+				val = uac1->c_srate;
+			buf[2] = (val >> 16) & 0xff;
+			buf[1] = (val >> 8) & 0xff;
+			buf[0] = val & 0xff;
+		}
+		value = len;
+		break;
+	}
+	case UAC_GET_MIN:
+	case UAC_GET_MAX:
+	case UAC_GET_RES:
+		value = len;
+		break;
+	case UAC_GET_MEM:
+		break;
+	default:
+		break;
+	}
+
+	return value;
+}
+
+static int
+f_audio_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	int			value = -EOPNOTSUPP;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	/* composite driver infrastructure handles everything; interface
+	 * activation uses set_alt().
+	 */
+	switch (ctrl->bRequestType) {
+	case USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT:
+		value = audio_set_endpoint_req(f, ctrl);
+		break;
+
+	case USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT:
+		value = audio_get_endpoint_req(f, ctrl);
+		break;
+	case USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE:
+		if (ctrl->bRequest == UAC_SET_CUR)
+			value = out_rq_cur(f, ctrl);
+		break;
+	case USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE:
+		value = ac_rq_in(f, ctrl);
+		break;
+	default:
+		ERROR(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+	}
+
+	/* respond with data transfer or status phase? */
+	if (value >= 0) {
+		DBG(cdev, "audio req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+		req->zero = 0;
+		req->length = value;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0)
+			ERROR(cdev, "audio response on err %d\n", value);
+	}
+
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+static int f_audio_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_gadget *gadget = cdev->gadget;
+	struct device *dev = &gadget->dev;
+	struct g_audio *audio = func_to_g_audio(f);
+	struct f_uac1 *uac1 = func_to_uac1(f);
+	int ret = 0;
+
+	/* No i/f has more than 2 alt settings */
+	if (alt > 1) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return -EINVAL;
+	}
+
+	if (intf == uac1->ac_intf) {
+		/* Control I/f has only 1 AltSetting - 0 */
+		if (alt) {
+			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+			return -EINVAL;
+		}
+
+		/* restart interrupt endpoint */
+		if (uac1->int_ep) {
+			usb_ep_disable(uac1->int_ep);
+			config_ep_by_speed(gadget, &audio->func, uac1->int_ep);
+			usb_ep_enable(uac1->int_ep);
+		}
+
+		return 0;
+	}
+
+	if (intf == uac1->as_out_intf) {
+		uac1->as_out_alt = alt;
+
+		if (alt)
+			ret = u_audio_start_capture(&uac1->g_audio);
+		else
+			u_audio_stop_capture(&uac1->g_audio);
+	} else if (intf == uac1->as_in_intf) {
+		uac1->as_in_alt = alt;
+
+		if (alt)
+			ret = u_audio_start_playback(&uac1->g_audio);
+		else
+			u_audio_stop_playback(&uac1->g_audio);
+	} else {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int f_audio_get_alt(struct usb_function *f, unsigned intf)
+{
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_gadget *gadget = cdev->gadget;
+	struct device *dev = &gadget->dev;
+	struct f_uac1 *uac1 = func_to_uac1(f);
+
+	if (intf == uac1->ac_intf)
+		return uac1->ac_alt;
+	else if (intf == uac1->as_out_intf)
+		return uac1->as_out_alt;
+	else if (intf == uac1->as_in_intf)
+		return uac1->as_in_alt;
+	else
+		dev_err(dev, "%s:%d Invalid Interface %d!\n",
+			__func__, __LINE__, intf);
+
+	return -EINVAL;
+}
+
+
+static void f_audio_disable(struct usb_function *f)
+{
+	struct f_uac1 *uac1 = func_to_uac1(f);
+
+	uac1->as_out_alt = 0;
+	uac1->as_in_alt = 0;
+
+	u_audio_stop_playback(&uac1->g_audio);
+	u_audio_stop_capture(&uac1->g_audio);
+	if (uac1->int_ep)
+		usb_ep_disable(uac1->int_ep);
+}
+
+static void
+f_audio_suspend(struct usb_function *f)
+{
+	struct f_uac1 *uac1 = func_to_uac1(f);
+
+	u_audio_suspend(&uac1->g_audio);
+}
+
+/*-------------------------------------------------------------------------*/
+static struct uac_feature_unit_descriptor *build_fu_desc(int chmask)
+{
+	struct uac_feature_unit_descriptor *fu_desc;
+	int channels = num_channels(chmask);
+	int fu_desc_size = UAC_DT_FEATURE_UNIT_SIZE(channels);
+
+	fu_desc = kzalloc(fu_desc_size, GFP_KERNEL);
+	if (!fu_desc)
+		return NULL;
+
+	fu_desc->bLength = fu_desc_size;
+	fu_desc->bDescriptorType = USB_DT_CS_INTERFACE;
+
+	fu_desc->bDescriptorSubtype = UAC_FEATURE_UNIT;
+	fu_desc->bControlSize  = 2;
+
+	/* bUnitID, bSourceID and bmaControls will be defined later */
+
+	return fu_desc;
+}
+
+/* B.3.2  Class-Specific AC Interface Descriptor */
+static struct
+uac1_ac_header_descriptor *build_ac_header_desc(struct f_uac1_opts *opts)
+{
+	struct uac1_ac_header_descriptor *ac_desc;
+	int ac_header_desc_size;
+	int num_ifaces = 0;
+
+	if (EPOUT_EN(opts))
+		num_ifaces++;
+	if (EPIN_EN(opts))
+		num_ifaces++;
+
+	ac_header_desc_size = UAC_DT_AC_HEADER_SIZE(num_ifaces);
+
+	ac_desc = kzalloc(ac_header_desc_size, GFP_KERNEL);
+	if (!ac_desc)
+		return NULL;
+
+	ac_desc->bLength = ac_header_desc_size;
+	ac_desc->bDescriptorType = USB_DT_CS_INTERFACE;
+	ac_desc->bDescriptorSubtype = UAC_HEADER;
+	ac_desc->bcdADC = cpu_to_le16(0x0100);
+	ac_desc->bInCollection = num_ifaces;
+
+	/* wTotalLength and baInterfaceNr will be defined later */
+
+	return ac_desc;
+}
+
+/* Use macro to overcome line length limitation */
+#define USBDHDR(p) (struct usb_descriptor_header *)(p)
+
+static void setup_descriptor(struct f_uac1_opts *opts)
+{
+	/* patch descriptors */
+	int i = 1; /* ID's start with 1 */
+
+	if (EPOUT_EN(opts))
+		usb_out_it_desc.bTerminalID = i++;
+	if (EPIN_EN(opts))
+		io_in_it_desc.bTerminalID = i++;
+	if (EPOUT_EN(opts))
+		io_out_ot_desc.bTerminalID = i++;
+	if (EPIN_EN(opts))
+		usb_in_ot_desc.bTerminalID = i++;
+	if (FUOUT_EN(opts))
+		out_feature_unit_desc->bUnitID = i++;
+	if (FUIN_EN(opts))
+		in_feature_unit_desc->bUnitID = i++;
+
+	if (FUIN_EN(opts)) {
+		usb_in_ot_desc.bSourceID = in_feature_unit_desc->bUnitID;
+		in_feature_unit_desc->bSourceID = io_in_it_desc.bTerminalID;
+	} else {
+		usb_in_ot_desc.bSourceID = io_in_it_desc.bTerminalID;
+	}
+	if (FUOUT_EN(opts)) {
+		io_out_ot_desc.bSourceID = out_feature_unit_desc->bUnitID;
+		out_feature_unit_desc->bSourceID = usb_out_it_desc.bTerminalID;
+	} else {
+		io_out_ot_desc.bSourceID = usb_out_it_desc.bTerminalID;
+	}
+
+	as_out_header_desc.bTerminalLink = usb_out_it_desc.bTerminalID;
+	as_in_header_desc.bTerminalLink = usb_in_ot_desc.bTerminalID;
+
+	ac_header_desc->wTotalLength = cpu_to_le16(ac_header_desc->bLength);
+
+	if (EPIN_EN(opts)) {
+		u16 len = le16_to_cpu(ac_header_desc->wTotalLength);
+
+		len += sizeof(usb_in_ot_desc);
+		len += sizeof(io_in_it_desc);
+		if (FUIN_EN(opts))
+			len += in_feature_unit_desc->bLength;
+		ac_header_desc->wTotalLength = cpu_to_le16(len);
+	}
+	if (EPOUT_EN(opts)) {
+		u16 len = le16_to_cpu(ac_header_desc->wTotalLength);
+
+		len += sizeof(usb_out_it_desc);
+		len += sizeof(io_out_ot_desc);
+		if (FUOUT_EN(opts))
+			len += out_feature_unit_desc->bLength;
+		ac_header_desc->wTotalLength = cpu_to_le16(len);
+	}
+
+	i = 0;
+	f_audio_desc[i++] = USBDHDR(&ac_interface_desc);
+	f_audio_desc[i++] = USBDHDR(ac_header_desc);
+
+	if (EPOUT_EN(opts)) {
+		f_audio_desc[i++] = USBDHDR(&usb_out_it_desc);
+		f_audio_desc[i++] = USBDHDR(&io_out_ot_desc);
+		if (FUOUT_EN(opts))
+			f_audio_desc[i++] = USBDHDR(out_feature_unit_desc);
+	}
+
+	if (EPIN_EN(opts)) {
+		f_audio_desc[i++] = USBDHDR(&io_in_it_desc);
+		f_audio_desc[i++] = USBDHDR(&usb_in_ot_desc);
+		if (FUIN_EN(opts))
+			f_audio_desc[i++] = USBDHDR(in_feature_unit_desc);
+	}
+
+	if (FUOUT_EN(opts) || FUIN_EN(opts))
+		f_audio_desc[i++] = USBDHDR(&ac_int_ep_desc);
+
+	if (EPOUT_EN(opts)) {
+		f_audio_desc[i++] = USBDHDR(&as_out_interface_alt_0_desc);
+		f_audio_desc[i++] = USBDHDR(&as_out_interface_alt_1_desc);
+		f_audio_desc[i++] = USBDHDR(&as_out_header_desc);
+		f_audio_desc[i++] = USBDHDR(&as_out_type_i_desc);
+		f_audio_desc[i++] = USBDHDR(&as_out_ep_desc);
+		f_audio_desc[i++] = USBDHDR(&as_iso_out_desc);
+	}
+	if (EPIN_EN(opts)) {
+		f_audio_desc[i++] = USBDHDR(&as_in_interface_alt_0_desc);
+		f_audio_desc[i++] = USBDHDR(&as_in_interface_alt_1_desc);
+		f_audio_desc[i++] = USBDHDR(&as_in_header_desc);
+		f_audio_desc[i++] = USBDHDR(&as_in_type_i_desc);
+		f_audio_desc[i++] = USBDHDR(&as_in_ep_desc);
+		f_audio_desc[i++] = USBDHDR(&as_iso_in_desc);
+	}
+	f_audio_desc[i] = NULL;
+}
+
+static int f_audio_validate_opts(struct g_audio *audio, struct device *dev)
+{
+	struct f_uac1_opts *opts = g_audio_to_uac1_opts(audio);
+
+	if (!opts->p_chmask && !opts->c_chmask) {
+		dev_err(dev, "Error: no playback and capture channels\n");
+		return -EINVAL;
+	} else if (opts->p_chmask & ~UAC1_CHANNEL_MASK) {
+		dev_err(dev, "Error: unsupported playback channels mask\n");
+		return -EINVAL;
+	} else if (opts->c_chmask & ~UAC1_CHANNEL_MASK) {
+		dev_err(dev, "Error: unsupported capture channels mask\n");
+		return -EINVAL;
+	} else if ((opts->p_ssize < 1) || (opts->p_ssize > 4)) {
+		dev_err(dev, "Error: incorrect playback sample size\n");
+		return -EINVAL;
+	} else if ((opts->c_ssize < 1) || (opts->c_ssize > 4)) {
+		dev_err(dev, "Error: incorrect capture sample size\n");
+		return -EINVAL;
+	} else if (!opts->p_srates[0]) {
+		dev_err(dev, "Error: incorrect playback sampling rate\n");
+		return -EINVAL;
+	} else if (!opts->c_srates[0]) {
+		dev_err(dev, "Error: incorrect capture sampling rate\n");
+		return -EINVAL;
+	}
+
+	if (opts->p_volume_max <= opts->p_volume_min) {
+		dev_err(dev, "Error: incorrect playback volume max/min\n");
+		return -EINVAL;
+	} else if (opts->c_volume_max <= opts->c_volume_min) {
+		dev_err(dev, "Error: incorrect capture volume max/min\n");
+		return -EINVAL;
+	} else if (opts->p_volume_res <= 0) {
+		dev_err(dev, "Error: negative/zero playback volume resolution\n");
+		return -EINVAL;
+	} else if (opts->c_volume_res <= 0) {
+		dev_err(dev, "Error: negative/zero capture volume resolution\n");
+		return -EINVAL;
+	}
+
+	if ((opts->p_volume_max - opts->p_volume_min) % opts->p_volume_res) {
+		dev_err(dev, "Error: incorrect playback volume resolution\n");
+		return -EINVAL;
+	} else if ((opts->c_volume_max - opts->c_volume_min) % opts->c_volume_res) {
+		dev_err(dev, "Error: incorrect capture volume resolution\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* audio function driver setup/binding */
+static int f_audio_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev	*cdev = c->cdev;
+	struct usb_gadget		*gadget = cdev->gadget;
+	struct device			*dev = &gadget->dev;
+	struct f_uac1			*uac1 = func_to_uac1(f);
+	struct g_audio			*audio = func_to_g_audio(f);
+	struct f_uac1_opts		*audio_opts;
+	struct usb_ep			*ep = NULL;
+	struct usb_string		*us;
+	int				ba_iface_id;
+	int				status;
+	int				idx, i;
+
+	status = f_audio_validate_opts(audio, dev);
+	if (status)
+		return status;
+
+	audio_opts = container_of(f->fi, struct f_uac1_opts, func_inst);
+
+	strings_uac1[STR_AC_IF].s = audio_opts->function_name;
+
+	us = usb_gstrings_attach(cdev, uac1_strings, ARRAY_SIZE(strings_uac1));
+	if (IS_ERR(us))
+		return PTR_ERR(us);
+
+	ac_header_desc = build_ac_header_desc(audio_opts);
+	if (!ac_header_desc)
+		return -ENOMEM;
+
+	if (FUOUT_EN(audio_opts)) {
+		out_feature_unit_desc = build_fu_desc(audio_opts->c_chmask);
+		if (!out_feature_unit_desc) {
+			status = -ENOMEM;
+			goto fail;
+		}
+	}
+	if (FUIN_EN(audio_opts)) {
+		in_feature_unit_desc = build_fu_desc(audio_opts->p_chmask);
+		if (!in_feature_unit_desc) {
+			status = -ENOMEM;
+			goto err_free_fu;
+		}
+	}
+
+	ac_interface_desc.iInterface = us[STR_AC_IF].id;
+	usb_out_it_desc.iTerminal = us[STR_USB_OUT_IT].id;
+	usb_out_it_desc.iChannelNames = us[STR_USB_OUT_IT_CH_NAMES].id;
+	io_out_ot_desc.iTerminal = us[STR_IO_OUT_OT].id;
+	as_out_interface_alt_0_desc.iInterface = us[STR_AS_OUT_IF_ALT0].id;
+	as_out_interface_alt_1_desc.iInterface = us[STR_AS_OUT_IF_ALT1].id;
+	io_in_it_desc.iTerminal = us[STR_IO_IN_IT].id;
+	io_in_it_desc.iChannelNames = us[STR_IO_IN_IT_CH_NAMES].id;
+	usb_in_ot_desc.iTerminal = us[STR_USB_IN_OT].id;
+	as_in_interface_alt_0_desc.iInterface = us[STR_AS_IN_IF_ALT0].id;
+	as_in_interface_alt_1_desc.iInterface = us[STR_AS_IN_IF_ALT1].id;
+
+	if (FUOUT_EN(audio_opts)) {
+		u8 *i_feature;
+
+		i_feature = (u8 *)out_feature_unit_desc +
+					out_feature_unit_desc->bLength - 1;
+		*i_feature = us[STR_FU_OUT].id;
+	}
+	if (FUIN_EN(audio_opts)) {
+		u8 *i_feature;
+
+		i_feature = (u8 *)in_feature_unit_desc +
+					in_feature_unit_desc->bLength - 1;
+		*i_feature = us[STR_FU_IN].id;
+	}
+
+	/* Set channel numbers */
+	usb_out_it_desc.bNrChannels = num_channels(audio_opts->c_chmask);
+	usb_out_it_desc.wChannelConfig = cpu_to_le16(audio_opts->c_chmask);
+	as_out_type_i_desc.bNrChannels = num_channels(audio_opts->c_chmask);
+	as_out_type_i_desc.bSubframeSize = audio_opts->c_ssize;
+	as_out_type_i_desc.bBitResolution = audio_opts->c_ssize * 8;
+	io_in_it_desc.bNrChannels = num_channels(audio_opts->p_chmask);
+	io_in_it_desc.wChannelConfig = cpu_to_le16(audio_opts->p_chmask);
+	as_in_type_i_desc.bNrChannels = num_channels(audio_opts->p_chmask);
+	as_in_type_i_desc.bSubframeSize = audio_opts->p_ssize;
+	as_in_type_i_desc.bBitResolution = audio_opts->p_ssize * 8;
+
+	if (FUOUT_EN(audio_opts)) {
+		__le16 *bma = (__le16 *)&out_feature_unit_desc->bmaControls[0];
+		u32 control = 0;
+
+		if (audio_opts->c_mute_present)
+			control |= UAC_FU_MUTE;
+		if (audio_opts->c_volume_present)
+			control |= UAC_FU_VOLUME;
+		*bma = cpu_to_le16(control);
+	}
+	if (FUIN_EN(audio_opts)) {
+		__le16 *bma = (__le16 *)&in_feature_unit_desc->bmaControls[0];
+		u32 control = 0;
+
+		if (audio_opts->p_mute_present)
+			control |= UAC_FU_MUTE;
+		if (audio_opts->p_volume_present)
+			control |= UAC_FU_VOLUME;
+		*bma = cpu_to_le16(control);
+	}
+
+	/* Set sample rates */
+	for (i = 0, idx = 0; i < UAC_MAX_RATES; i++) {
+		if (audio_opts->c_srates[i] == 0)
+			break;
+		memcpy(as_out_type_i_desc.tSamFreq[idx++],
+				&audio_opts->c_srates[i], 3);
+	}
+	as_out_type_i_desc.bLength = UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(idx);
+	as_out_type_i_desc.bSamFreqType = idx;
+
+	for (i = 0, idx = 0; i < UAC_MAX_RATES; i++) {
+		if (audio_opts->p_srates[i] == 0)
+			break;
+		memcpy(as_in_type_i_desc.tSamFreq[idx++],
+				&audio_opts->p_srates[i], 3);
+	}
+	as_in_type_i_desc.bLength = UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(idx);
+	as_in_type_i_desc.bSamFreqType = idx;
+	uac1->p_srate = audio_opts->p_srates[0];
+	uac1->c_srate = audio_opts->c_srates[0];
+
+	/* allocate instance-specific interface IDs, and patch descriptors */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto err_free_fu;
+	ac_interface_desc.bInterfaceNumber = status;
+	uac1->ac_intf = status;
+	uac1->ac_alt = 0;
+
+	ba_iface_id = 0;
+
+	if (EPOUT_EN(audio_opts)) {
+		status = usb_interface_id(c, f);
+		if (status < 0)
+			goto err_free_fu;
+		as_out_interface_alt_0_desc.bInterfaceNumber = status;
+		as_out_interface_alt_1_desc.bInterfaceNumber = status;
+		ac_header_desc->baInterfaceNr[ba_iface_id++] = status;
+		uac1->as_out_intf = status;
+		uac1->as_out_alt = 0;
+	}
+
+	if (EPIN_EN(audio_opts)) {
+		status = usb_interface_id(c, f);
+		if (status < 0)
+			goto err_free_fu;
+		as_in_interface_alt_0_desc.bInterfaceNumber = status;
+		as_in_interface_alt_1_desc.bInterfaceNumber = status;
+		ac_header_desc->baInterfaceNr[ba_iface_id++] = status;
+		uac1->as_in_intf = status;
+		uac1->as_in_alt = 0;
+	}
+
+	audio->gadget = gadget;
+
+	status = -ENODEV;
+
+	ac_interface_desc.bNumEndpoints = 0;
+
+	/* allocate AC interrupt endpoint */
+	if (FUOUT_EN(audio_opts) || FUIN_EN(audio_opts)) {
+		ep = usb_ep_autoconfig(cdev->gadget, &ac_int_ep_desc);
+		if (!ep)
+			goto err_free_fu;
+		uac1->int_ep = ep;
+		uac1->int_ep->desc = &ac_int_ep_desc;
+
+		ac_interface_desc.bNumEndpoints = 1;
+	}
+
+	/* allocate instance-specific endpoints */
+	if (EPOUT_EN(audio_opts)) {
+		ep = usb_ep_autoconfig(cdev->gadget, &as_out_ep_desc);
+		if (!ep)
+			goto err_free_fu;
+		audio->out_ep = ep;
+		audio->out_ep->desc = &as_out_ep_desc;
+	}
+
+	if (EPIN_EN(audio_opts)) {
+		ep = usb_ep_autoconfig(cdev->gadget, &as_in_ep_desc);
+		if (!ep)
+			goto err_free_fu;
+		audio->in_ep = ep;
+		audio->in_ep->desc = &as_in_ep_desc;
+	}
+
+	setup_descriptor(audio_opts);
+
+	/* copy descriptors, and track endpoint copies */
+	status = usb_assign_descriptors(f, f_audio_desc, f_audio_desc, NULL,
+					NULL);
+	if (status)
+		goto err_free_fu;
+
+	audio->out_ep_maxpsize = le16_to_cpu(as_out_ep_desc.wMaxPacketSize);
+	audio->in_ep_maxpsize = le16_to_cpu(as_in_ep_desc.wMaxPacketSize);
+	audio->params.c_chmask = audio_opts->c_chmask;
+	memcpy(audio->params.c_srates, audio_opts->c_srates,
+			sizeof(audio->params.c_srates));
+	audio->params.c_ssize = audio_opts->c_ssize;
+	if (FUIN_EN(audio_opts)) {
+		audio->params.p_fu.id = USB_IN_FU_ID;
+		audio->params.p_fu.mute_present = audio_opts->p_mute_present;
+		audio->params.p_fu.volume_present =
+				audio_opts->p_volume_present;
+		audio->params.p_fu.volume_min = audio_opts->p_volume_min;
+		audio->params.p_fu.volume_max = audio_opts->p_volume_max;
+		audio->params.p_fu.volume_res = audio_opts->p_volume_res;
+	}
+	audio->params.p_chmask = audio_opts->p_chmask;
+	memcpy(audio->params.p_srates, audio_opts->p_srates,
+			sizeof(audio->params.p_srates));
+	audio->params.p_ssize = audio_opts->p_ssize;
+	if (FUOUT_EN(audio_opts)) {
+		audio->params.c_fu.id = USB_OUT_FU_ID;
+		audio->params.c_fu.mute_present = audio_opts->c_mute_present;
+		audio->params.c_fu.volume_present =
+				audio_opts->c_volume_present;
+		audio->params.c_fu.volume_min = audio_opts->c_volume_min;
+		audio->params.c_fu.volume_max = audio_opts->c_volume_max;
+		audio->params.c_fu.volume_res = audio_opts->c_volume_res;
+	}
+	audio->params.req_number = audio_opts->req_number;
+	audio->params.fb_max = FBACK_FAST_MAX;
+	if (FUOUT_EN(audio_opts) || FUIN_EN(audio_opts))
+		audio->notify = audio_notify;
+
+	status = g_audio_setup(audio, "UAC1_PCM", "UAC1_Gadget");
+	if (status)
+		goto err_card_register;
+
+	return 0;
+
+err_card_register:
+	usb_free_all_descriptors(f);
+err_free_fu:
+	kfree(out_feature_unit_desc);
+	out_feature_unit_desc = NULL;
+	kfree(in_feature_unit_desc);
+	in_feature_unit_desc = NULL;
+fail:
+	kfree(ac_header_desc);
+	ac_header_desc = NULL;
+	return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline struct f_uac1_opts *to_f_uac1_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_uac1_opts,
+			    func_inst.group);
+}
+
+static void f_uac1_attr_release(struct config_item *item)
+{
+	struct f_uac1_opts *opts = to_f_uac1_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations f_uac1_item_ops = {
+	.release	= f_uac1_attr_release,
+};
+
+#define uac1_kstrtou32			kstrtou32
+#define uac1_kstrtos16			kstrtos16
+#define uac1_kstrtobool(s, base, res)	kstrtobool((s), (res))
+
+static const char *u32_fmt = "%u\n";
+static const char *s16_fmt = "%hd\n";
+static const char *bool_fmt = "%u\n";
+
+#define UAC1_ATTRIBUTE(type, name)					\
+static ssize_t f_uac1_opts_##name##_show(				\
+					  struct config_item *item,	\
+					  char *page)			\
+{									\
+	struct f_uac1_opts *opts = to_f_uac1_opts(item);		\
+	int result;							\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, type##_fmt, opts->name);			\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t f_uac1_opts_##name##_store(				\
+					  struct config_item *item,	\
+					  const char *page, size_t len)	\
+{									\
+	struct f_uac1_opts *opts = to_f_uac1_opts(item);		\
+	int ret;							\
+	type num;							\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt) {						\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	ret = uac1_kstrto##type(page, 0, &num);				\
+	if (ret)							\
+		goto end;						\
+									\
+	opts->name = num;						\
+	ret = len;							\
+									\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+CONFIGFS_ATTR(f_uac1_opts_, name)
+
+#define UAC1_RATE_ATTRIBUTE(name)					\
+static ssize_t f_uac1_opts_##name##_show(struct config_item *item,	\
+					 char *page)			\
+{									\
+	struct f_uac1_opts *opts = to_f_uac1_opts(item);		\
+	int result = 0;							\
+	int i;								\
+									\
+	mutex_lock(&opts->lock);					\
+	page[0] = '\0';							\
+	for (i = 0; i < UAC_MAX_RATES; i++) {				\
+		if (opts->name##s[i] == 0)				\
+			break;						\
+		result += sprintf(page + strlen(page), "%u,",		\
+				opts->name##s[i]);			\
+	}								\
+	if (strlen(page) > 0)						\
+		page[strlen(page) - 1] = '\n';				\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t f_uac1_opts_##name##_store(struct config_item *item,	\
+					  const char *page, size_t len)	\
+{									\
+	struct f_uac1_opts *opts = to_f_uac1_opts(item);		\
+	char *split_page = NULL;					\
+	int ret = -EINVAL;						\
+	char *token;							\
+	u32 num;							\
+	int i;								\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt) {						\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	i = 0;								\
+	memset(opts->name##s, 0x00, sizeof(opts->name##s));		\
+	split_page = kstrdup(page, GFP_KERNEL);				\
+	while ((token = strsep(&split_page, ",")) != NULL) {		\
+		ret = kstrtou32(token, 0, &num);			\
+		if (ret)						\
+			goto end;					\
+									\
+		opts->name##s[i++] = num;				\
+		ret = len;						\
+	};								\
+									\
+end:									\
+	kfree(split_page);						\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+CONFIGFS_ATTR(f_uac1_opts_, name)
+
+#define UAC1_ATTRIBUTE_STRING(name)					\
+static ssize_t f_uac1_opts_##name##_show(struct config_item *item,	\
+					 char *page)			\
+{									\
+	struct f_uac1_opts *opts = to_f_uac1_opts(item);		\
+	int result;							\
+									\
+	mutex_lock(&opts->lock);					\
+	result = snprintf(page, sizeof(opts->name), "%s", opts->name);	\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t f_uac1_opts_##name##_store(struct config_item *item,	\
+					  const char *page, size_t len)	\
+{									\
+	struct f_uac1_opts *opts = to_f_uac1_opts(item);		\
+	int ret = 0;							\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt) {						\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	ret = snprintf(opts->name, min(sizeof(opts->name), len),	\
+			"%s", page);					\
+									\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+CONFIGFS_ATTR(f_uac1_opts_, name)
+
+UAC1_ATTRIBUTE(u32, c_chmask);
+UAC1_RATE_ATTRIBUTE(c_srate);
+UAC1_ATTRIBUTE(u32, c_ssize);
+UAC1_ATTRIBUTE(u32, p_chmask);
+UAC1_RATE_ATTRIBUTE(p_srate);
+UAC1_ATTRIBUTE(u32, p_ssize);
+UAC1_ATTRIBUTE(u32, req_number);
+
+UAC1_ATTRIBUTE(bool, p_mute_present);
+UAC1_ATTRIBUTE(bool, p_volume_present);
+UAC1_ATTRIBUTE(s16, p_volume_min);
+UAC1_ATTRIBUTE(s16, p_volume_max);
+UAC1_ATTRIBUTE(s16, p_volume_res);
+
+UAC1_ATTRIBUTE(bool, c_mute_present);
+UAC1_ATTRIBUTE(bool, c_volume_present);
+UAC1_ATTRIBUTE(s16, c_volume_min);
+UAC1_ATTRIBUTE(s16, c_volume_max);
+UAC1_ATTRIBUTE(s16, c_volume_res);
+UAC1_ATTRIBUTE_STRING(function_name);
+
+static struct configfs_attribute *f_uac1_attrs[] = {
+	&f_uac1_opts_attr_c_chmask,
+	&f_uac1_opts_attr_c_srate,
+	&f_uac1_opts_attr_c_ssize,
+	&f_uac1_opts_attr_p_chmask,
+	&f_uac1_opts_attr_p_srate,
+	&f_uac1_opts_attr_p_ssize,
+	&f_uac1_opts_attr_req_number,
+
+	&f_uac1_opts_attr_p_mute_present,
+	&f_uac1_opts_attr_p_volume_present,
+	&f_uac1_opts_attr_p_volume_min,
+	&f_uac1_opts_attr_p_volume_max,
+	&f_uac1_opts_attr_p_volume_res,
+
+	&f_uac1_opts_attr_c_mute_present,
+	&f_uac1_opts_attr_c_volume_present,
+	&f_uac1_opts_attr_c_volume_min,
+	&f_uac1_opts_attr_c_volume_max,
+	&f_uac1_opts_attr_c_volume_res,
+
+	&f_uac1_opts_attr_function_name,
+
+	NULL,
+};
+
+static const struct config_item_type f_uac1_func_type = {
+	.ct_item_ops	= &f_uac1_item_ops,
+	.ct_attrs	= f_uac1_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void f_audio_free_inst(struct usb_function_instance *f)
+{
+	struct f_uac1_opts *opts;
+
+	opts = container_of(f, struct f_uac1_opts, func_inst);
+	kfree(opts);
+}
+
+static struct usb_function_instance *f_audio_alloc_inst(void)
+{
+	struct f_uac1_opts *opts;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&opts->lock);
+	opts->func_inst.free_func_inst = f_audio_free_inst;
+
+	config_group_init_type_name(&opts->func_inst.group, "",
+				    &f_uac1_func_type);
+
+	opts->c_chmask = UAC1_DEF_CCHMASK;
+	opts->c_srates[0] = UAC1_DEF_CSRATE;
+	opts->c_ssize = UAC1_DEF_CSSIZE;
+	opts->p_chmask = UAC1_DEF_PCHMASK;
+	opts->p_srates[0] = UAC1_DEF_PSRATE;
+	opts->p_ssize = UAC1_DEF_PSSIZE;
+
+	opts->p_mute_present = UAC1_DEF_MUTE_PRESENT;
+	opts->p_volume_present = UAC1_DEF_VOLUME_PRESENT;
+	opts->p_volume_min = UAC1_DEF_MIN_DB;
+	opts->p_volume_max = UAC1_DEF_MAX_DB;
+	opts->p_volume_res = UAC1_DEF_RES_DB;
+
+	opts->c_mute_present = UAC1_DEF_MUTE_PRESENT;
+	opts->c_volume_present = UAC1_DEF_VOLUME_PRESENT;
+	opts->c_volume_min = UAC1_DEF_MIN_DB;
+	opts->c_volume_max = UAC1_DEF_MAX_DB;
+	opts->c_volume_res = UAC1_DEF_RES_DB;
+
+	opts->req_number = UAC1_DEF_REQ_NUM;
+
+	snprintf(opts->function_name, sizeof(opts->function_name), "AC Interface");
+
+	return &opts->func_inst;
+}
+
+static void f_audio_free(struct usb_function *f)
+{
+	struct g_audio *audio;
+	struct f_uac1_opts *opts;
+
+	audio = func_to_g_audio(f);
+	opts = container_of(f->fi, struct f_uac1_opts, func_inst);
+	kfree(audio);
+	mutex_lock(&opts->lock);
+	--opts->refcnt;
+	mutex_unlock(&opts->lock);
+}
+
+static void f_audio_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct g_audio *audio = func_to_g_audio(f);
+
+	g_audio_cleanup(audio);
+	usb_free_all_descriptors(f);
+
+	kfree(out_feature_unit_desc);
+	out_feature_unit_desc = NULL;
+	kfree(in_feature_unit_desc);
+	in_feature_unit_desc = NULL;
+
+	kfree(ac_header_desc);
+	ac_header_desc = NULL;
+
+	audio->gadget = NULL;
+}
+
+static struct usb_function *f_audio_alloc(struct usb_function_instance *fi)
+{
+	struct f_uac1 *uac1;
+	struct f_uac1_opts *opts;
+
+	/* allocate and initialize one new instance */
+	uac1 = kzalloc(sizeof(*uac1), GFP_KERNEL);
+	if (!uac1)
+		return ERR_PTR(-ENOMEM);
+
+	opts = container_of(fi, struct f_uac1_opts, func_inst);
+	mutex_lock(&opts->lock);
+	++opts->refcnt;
+	mutex_unlock(&opts->lock);
+
+	uac1->g_audio.func.name = "uac1_func";
+	uac1->g_audio.func.bind = f_audio_bind;
+	uac1->g_audio.func.unbind = f_audio_unbind;
+	uac1->g_audio.func.set_alt = f_audio_set_alt;
+	uac1->g_audio.func.get_alt = f_audio_get_alt;
+	uac1->g_audio.func.setup = f_audio_setup;
+	uac1->g_audio.func.disable = f_audio_disable;
+	uac1->g_audio.func.suspend = f_audio_suspend;
+	uac1->g_audio.func.free_func = f_audio_free;
+
+	return &uac1->g_audio.func;
+}
+
+DECLARE_USB_FUNCTION_INIT(uac1, f_audio_alloc_inst, f_audio_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ruslan Bilovol");
diff --git a/drivers/usb/gadget/function/f_uac1_legacy.c b/drivers/usb/gadget/function/f_uac1_legacy.c
new file mode 100644
index 000000000..e2d7f6912
--- /dev/null
+++ b/drivers/usb/gadget/function/f_uac1_legacy.c
@@ -0,0 +1,1018 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_audio.c -- USB Audio class function driver
+  *
+ * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ * Copyright (C) 2008 Analog Devices, Inc
+ */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/atomic.h>
+
+#include "u_uac1_legacy.h"
+
+static int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value);
+static int generic_get_cmd(struct usb_audio_control *con, u8 cmd);
+
+/*
+ * DESCRIPTORS ... most are static, but strings and full
+ * configuration descriptors are built on demand.
+ */
+
+/*
+ * We have two interfaces- AudioControl and AudioStreaming
+ * TODO: only supcard playback currently
+ */
+#define F_AUDIO_AC_INTERFACE	0
+#define F_AUDIO_AS_INTERFACE	1
+#define F_AUDIO_NUM_INTERFACES	1
+
+/* B.3.1  Standard AC Interface Descriptor */
+static struct usb_interface_descriptor ac_interface_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	.bNumEndpoints =	0,
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOCONTROL,
+};
+
+/*
+ * The number of AudioStreaming and MIDIStreaming interfaces
+ * in the Audio Interface Collection
+ */
+DECLARE_UAC_AC_HEADER_DESCRIPTOR(1);
+
+#define UAC_DT_AC_HEADER_LENGTH	UAC_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES)
+/* 1 input terminal, 1 output terminal and 1 feature unit */
+#define UAC_DT_TOTAL_LENGTH (UAC_DT_AC_HEADER_LENGTH + UAC_DT_INPUT_TERMINAL_SIZE \
+	+ UAC_DT_OUTPUT_TERMINAL_SIZE + UAC_DT_FEATURE_UNIT_SIZE(0))
+/* B.3.2  Class-Specific AC Interface Descriptor */
+static struct uac1_ac_header_descriptor_1 ac_header_desc = {
+	.bLength =		UAC_DT_AC_HEADER_LENGTH,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	UAC_HEADER,
+	.bcdADC =		cpu_to_le16(0x0100),
+	.wTotalLength =		cpu_to_le16(UAC_DT_TOTAL_LENGTH),
+	.bInCollection =	F_AUDIO_NUM_INTERFACES,
+	.baInterfaceNr = {
+	/* Interface number of the first AudioStream interface */
+		[0] =		1,
+	}
+};
+
+#define INPUT_TERMINAL_ID	1
+static struct uac_input_terminal_descriptor input_terminal_desc = {
+	.bLength =		UAC_DT_INPUT_TERMINAL_SIZE,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	UAC_INPUT_TERMINAL,
+	.bTerminalID =		INPUT_TERMINAL_ID,
+	.wTerminalType =	UAC_TERMINAL_STREAMING,
+	.bAssocTerminal =	0,
+	.wChannelConfig =	0x3,
+};
+
+DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(0);
+
+#define FEATURE_UNIT_ID		2
+static struct uac_feature_unit_descriptor_0 feature_unit_desc = {
+	.bLength		= UAC_DT_FEATURE_UNIT_SIZE(0),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype	= UAC_FEATURE_UNIT,
+	.bUnitID		= FEATURE_UNIT_ID,
+	.bSourceID		= INPUT_TERMINAL_ID,
+	.bControlSize		= 2,
+	.bmaControls[0]		= (UAC_FU_MUTE | UAC_FU_VOLUME),
+};
+
+static struct usb_audio_control mute_control = {
+	.list = LIST_HEAD_INIT(mute_control.list),
+	.name = "Mute Control",
+	.type = UAC_FU_MUTE,
+	/* Todo: add real Mute control code */
+	.set = generic_set_cmd,
+	.get = generic_get_cmd,
+};
+
+static struct usb_audio_control volume_control = {
+	.list = LIST_HEAD_INIT(volume_control.list),
+	.name = "Volume Control",
+	.type = UAC_FU_VOLUME,
+	/* Todo: add real Volume control code */
+	.set = generic_set_cmd,
+	.get = generic_get_cmd,
+};
+
+static struct usb_audio_control_selector feature_unit = {
+	.list = LIST_HEAD_INIT(feature_unit.list),
+	.id = FEATURE_UNIT_ID,
+	.name = "Mute & Volume Control",
+	.type = UAC_FEATURE_UNIT,
+	.desc = (struct usb_descriptor_header *)&feature_unit_desc,
+};
+
+#define OUTPUT_TERMINAL_ID	3
+static struct uac1_output_terminal_descriptor output_terminal_desc = {
+	.bLength		= UAC_DT_OUTPUT_TERMINAL_SIZE,
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype	= UAC_OUTPUT_TERMINAL,
+	.bTerminalID		= OUTPUT_TERMINAL_ID,
+	.wTerminalType		= UAC_OUTPUT_TERMINAL_SPEAKER,
+	.bAssocTerminal		= FEATURE_UNIT_ID,
+	.bSourceID		= FEATURE_UNIT_ID,
+};
+
+/* B.4.1  Standard AS Interface Descriptor */
+static struct usb_interface_descriptor as_interface_alt_0_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	.bAlternateSetting =	0,
+	.bNumEndpoints =	0,
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOSTREAMING,
+};
+
+static struct usb_interface_descriptor as_interface_alt_1_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	.bAlternateSetting =	1,
+	.bNumEndpoints =	1,
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOSTREAMING,
+};
+
+/* B.4.2  Class-Specific AS Interface Descriptor */
+static struct uac1_as_header_descriptor as_header_desc = {
+	.bLength =		UAC_DT_AS_HEADER_SIZE,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	UAC_AS_GENERAL,
+	.bTerminalLink =	INPUT_TERMINAL_ID,
+	.bDelay =		1,
+	.wFormatTag =		UAC_FORMAT_TYPE_I_PCM,
+};
+
+DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(1);
+
+static struct uac_format_type_i_discrete_descriptor_1 as_type_i_desc = {
+	.bLength =		UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(1),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	UAC_FORMAT_TYPE,
+	.bFormatType =		UAC_FORMAT_TYPE_I,
+	.bSubframeSize =	2,
+	.bBitResolution =	16,
+	.bSamFreqType =		1,
+};
+
+/* Standard ISO OUT Endpoint Descriptor */
+static struct usb_endpoint_descriptor as_out_ep_desc  = {
+	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_SYNC_ADAPTIVE
+				| USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize	=	cpu_to_le16(UAC1_OUT_EP_MAX_PACKET_SIZE),
+	.bInterval =		4,
+};
+
+/* Class-specific AS ISO OUT Endpoint Descriptor */
+static struct uac_iso_endpoint_descriptor as_iso_out_desc = {
+	.bLength =		UAC_ISO_ENDPOINT_DESC_SIZE,
+	.bDescriptorType =	USB_DT_CS_ENDPOINT,
+	.bDescriptorSubtype =	UAC_EP_GENERAL,
+	.bmAttributes = 	1,
+	.bLockDelayUnits =	1,
+	.wLockDelay =		cpu_to_le16(1),
+};
+
+static struct usb_descriptor_header *f_audio_desc[] = {
+	(struct usb_descriptor_header *)&ac_interface_desc,
+	(struct usb_descriptor_header *)&ac_header_desc,
+
+	(struct usb_descriptor_header *)&input_terminal_desc,
+	(struct usb_descriptor_header *)&output_terminal_desc,
+	(struct usb_descriptor_header *)&feature_unit_desc,
+
+	(struct usb_descriptor_header *)&as_interface_alt_0_desc,
+	(struct usb_descriptor_header *)&as_interface_alt_1_desc,
+	(struct usb_descriptor_header *)&as_header_desc,
+
+	(struct usb_descriptor_header *)&as_type_i_desc,
+
+	(struct usb_descriptor_header *)&as_out_ep_desc,
+	(struct usb_descriptor_header *)&as_iso_out_desc,
+	NULL,
+};
+
+enum {
+	STR_AC_IF,
+	STR_INPUT_TERMINAL,
+	STR_INPUT_TERMINAL_CH_NAMES,
+	STR_FEAT_DESC_0,
+	STR_OUTPUT_TERMINAL,
+	STR_AS_IF_ALT0,
+	STR_AS_IF_ALT1,
+};
+
+static struct usb_string strings_uac1[] = {
+	[STR_AC_IF].s = "AC Interface",
+	[STR_INPUT_TERMINAL].s = "Input terminal",
+	[STR_INPUT_TERMINAL_CH_NAMES].s = "Channels",
+	[STR_FEAT_DESC_0].s = "Volume control & mute",
+	[STR_OUTPUT_TERMINAL].s = "Output terminal",
+	[STR_AS_IF_ALT0].s = "AS Interface",
+	[STR_AS_IF_ALT1].s = "AS Interface",
+	{ },
+};
+
+static struct usb_gadget_strings str_uac1 = {
+	.language = 0x0409,	/* en-us */
+	.strings = strings_uac1,
+};
+
+static struct usb_gadget_strings *uac1_strings[] = {
+	&str_uac1,
+	NULL,
+};
+
+/*
+ * This function is an ALSA sound card following USB Audio Class Spec 1.0.
+ */
+
+/*-------------------------------------------------------------------------*/
+struct f_audio_buf {
+	u8 *buf;
+	int actual;
+	struct list_head list;
+};
+
+static struct f_audio_buf *f_audio_buffer_alloc(int buf_size)
+{
+	struct f_audio_buf *copy_buf;
+
+	copy_buf = kzalloc(sizeof *copy_buf, GFP_ATOMIC);
+	if (!copy_buf)
+		return ERR_PTR(-ENOMEM);
+
+	copy_buf->buf = kzalloc(buf_size, GFP_ATOMIC);
+	if (!copy_buf->buf) {
+		kfree(copy_buf);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	return copy_buf;
+}
+
+static void f_audio_buffer_free(struct f_audio_buf *audio_buf)
+{
+	kfree(audio_buf->buf);
+	kfree(audio_buf);
+}
+/*-------------------------------------------------------------------------*/
+
+struct f_audio {
+	struct gaudio			card;
+
+	u8 ac_intf, ac_alt;
+	u8 as_intf, as_alt;
+
+	/* endpoints handle full and/or high speeds */
+	struct usb_ep			*out_ep;
+
+	spinlock_t			lock;
+	struct f_audio_buf *copy_buf;
+	struct work_struct playback_work;
+	struct list_head play_queue;
+
+	/* Control Set command */
+	struct list_head cs;
+	u8 set_cmd;
+	struct usb_audio_control *set_con;
+};
+
+static inline struct f_audio *func_to_audio(struct usb_function *f)
+{
+	return container_of(f, struct f_audio, card.func);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void f_audio_playback_work(struct work_struct *data)
+{
+	struct f_audio *audio = container_of(data, struct f_audio,
+					playback_work);
+	struct f_audio_buf *play_buf;
+
+	spin_lock_irq(&audio->lock);
+	if (list_empty(&audio->play_queue)) {
+		spin_unlock_irq(&audio->lock);
+		return;
+	}
+	play_buf = list_first_entry(&audio->play_queue,
+			struct f_audio_buf, list);
+	list_del(&play_buf->list);
+	spin_unlock_irq(&audio->lock);
+
+	u_audio_playback(&audio->card, play_buf->buf, play_buf->actual);
+	f_audio_buffer_free(play_buf);
+}
+
+static int f_audio_out_ep_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_audio *audio = req->context;
+	struct usb_composite_dev *cdev = audio->card.func.config->cdev;
+	struct f_audio_buf *copy_buf = audio->copy_buf;
+	struct f_uac1_legacy_opts *opts;
+	int audio_buf_size;
+	int err;
+
+	opts = container_of(audio->card.func.fi, struct f_uac1_legacy_opts,
+			    func_inst);
+	audio_buf_size = opts->audio_buf_size;
+
+	if (!copy_buf)
+		return -EINVAL;
+
+	/* Copy buffer is full, add it to the play_queue */
+	if (audio_buf_size - copy_buf->actual < req->actual) {
+		spin_lock_irq(&audio->lock);
+		list_add_tail(&copy_buf->list, &audio->play_queue);
+		spin_unlock_irq(&audio->lock);
+		schedule_work(&audio->playback_work);
+		copy_buf = f_audio_buffer_alloc(audio_buf_size);
+		if (IS_ERR(copy_buf))
+			return -ENOMEM;
+	}
+
+	memcpy(copy_buf->buf + copy_buf->actual, req->buf, req->actual);
+	copy_buf->actual += req->actual;
+	audio->copy_buf = copy_buf;
+
+	err = usb_ep_queue(ep, req, GFP_ATOMIC);
+	if (err)
+		ERROR(cdev, "%s queue req: %d\n", ep->name, err);
+
+	return 0;
+
+}
+
+static void f_audio_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_audio *audio = req->context;
+	int status = req->status;
+	u32 data = 0;
+	struct usb_ep *out_ep = audio->out_ep;
+
+	switch (status) {
+
+	case 0:				/* normal completion? */
+		if (ep == out_ep)
+			f_audio_out_ep_complete(ep, req);
+		else if (audio->set_con) {
+			memcpy(&data, req->buf, req->length);
+			audio->set_con->set(audio->set_con, audio->set_cmd,
+					le16_to_cpu(data));
+			audio->set_con = NULL;
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static int audio_set_intf_req(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct f_audio		*audio = func_to_audio(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	u8			id = ((le16_to_cpu(ctrl->wIndex) >> 8) & 0xFF);
+	u16			len = le16_to_cpu(ctrl->wLength);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u8			con_sel = (w_value >> 8) & 0xFF;
+	u8			cmd = (ctrl->bRequest & 0x0F);
+	struct usb_audio_control_selector *cs;
+	struct usb_audio_control *con;
+
+	DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, entity %d\n",
+			ctrl->bRequest, w_value, len, id);
+
+	list_for_each_entry(cs, &audio->cs, list) {
+		if (cs->id == id) {
+			list_for_each_entry(con, &cs->control, list) {
+				if (con->type == con_sel) {
+					audio->set_con = con;
+					break;
+				}
+			}
+			break;
+		}
+	}
+
+	audio->set_cmd = cmd;
+	req->context = audio;
+	req->complete = f_audio_complete;
+
+	return len;
+}
+
+static int audio_get_intf_req(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct f_audio		*audio = func_to_audio(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	int			value = -EOPNOTSUPP;
+	u8			id = ((le16_to_cpu(ctrl->wIndex) >> 8) & 0xFF);
+	u16			len = le16_to_cpu(ctrl->wLength);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u8			con_sel = (w_value >> 8) & 0xFF;
+	u8			cmd = (ctrl->bRequest & 0x0F);
+	struct usb_audio_control_selector *cs;
+	struct usb_audio_control *con;
+
+	DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, entity %d\n",
+			ctrl->bRequest, w_value, len, id);
+
+	list_for_each_entry(cs, &audio->cs, list) {
+		if (cs->id == id) {
+			list_for_each_entry(con, &cs->control, list) {
+				if (con->type == con_sel && con->get) {
+					value = con->get(con, cmd);
+					break;
+				}
+			}
+			break;
+		}
+	}
+
+	req->context = audio;
+	req->complete = f_audio_complete;
+	len = min_t(size_t, sizeof(value), len);
+	memcpy(req->buf, &value, len);
+
+	return len;
+}
+
+static int audio_set_endpoint_req(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev *cdev = f->config->cdev;
+	int			value = -EOPNOTSUPP;
+	u16			ep = le16_to_cpu(ctrl->wIndex);
+	u16			len = le16_to_cpu(ctrl->wLength);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+
+	DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, endpoint %d\n",
+			ctrl->bRequest, w_value, len, ep);
+
+	switch (ctrl->bRequest) {
+	case UAC_SET_CUR:
+		value = len;
+		break;
+
+	case UAC_SET_MIN:
+		break;
+
+	case UAC_SET_MAX:
+		break;
+
+	case UAC_SET_RES:
+		break;
+
+	case UAC_SET_MEM:
+		break;
+
+	default:
+		break;
+	}
+
+	return value;
+}
+
+static int audio_get_endpoint_req(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev *cdev = f->config->cdev;
+	int value = -EOPNOTSUPP;
+	u8 ep = ((le16_to_cpu(ctrl->wIndex) >> 8) & 0xFF);
+	u16 len = le16_to_cpu(ctrl->wLength);
+	u16 w_value = le16_to_cpu(ctrl->wValue);
+
+	DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, endpoint %d\n",
+			ctrl->bRequest, w_value, len, ep);
+
+	switch (ctrl->bRequest) {
+	case UAC_GET_CUR:
+	case UAC_GET_MIN:
+	case UAC_GET_MAX:
+	case UAC_GET_RES:
+		value = len;
+		break;
+	case UAC_GET_MEM:
+		break;
+	default:
+		break;
+	}
+
+	return value;
+}
+
+static int
+f_audio_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	int			value = -EOPNOTSUPP;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	/* composite driver infrastructure handles everything; interface
+	 * activation uses set_alt().
+	 */
+	switch (ctrl->bRequestType) {
+	case USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE:
+		value = audio_set_intf_req(f, ctrl);
+		break;
+
+	case USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE:
+		value = audio_get_intf_req(f, ctrl);
+		break;
+
+	case USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT:
+		value = audio_set_endpoint_req(f, ctrl);
+		break;
+
+	case USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT:
+		value = audio_get_endpoint_req(f, ctrl);
+		break;
+
+	default:
+		ERROR(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+	}
+
+	/* respond with data transfer or status phase? */
+	if (value >= 0) {
+		DBG(cdev, "audio req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+		req->zero = 0;
+		req->length = value;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0)
+			ERROR(cdev, "audio response on err %d\n", value);
+	}
+
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+static int f_audio_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_audio		*audio = func_to_audio(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_ep *out_ep = audio->out_ep;
+	struct usb_request *req;
+	struct f_uac1_legacy_opts *opts;
+	int req_buf_size, req_count, audio_buf_size;
+	int i = 0, err = 0;
+
+	DBG(cdev, "intf %d, alt %d\n", intf, alt);
+
+	opts = container_of(f->fi, struct f_uac1_legacy_opts, func_inst);
+	req_buf_size = opts->req_buf_size;
+	req_count = opts->req_count;
+	audio_buf_size = opts->audio_buf_size;
+
+	/* No i/f has more than 2 alt settings */
+	if (alt > 1) {
+		ERROR(cdev, "%s:%d Error!\n", __func__, __LINE__);
+		return -EINVAL;
+	}
+
+	if (intf == audio->ac_intf) {
+		/* Control I/f has only 1 AltSetting - 0 */
+		if (alt) {
+			ERROR(cdev, "%s:%d Error!\n", __func__, __LINE__);
+			return -EINVAL;
+		}
+		return 0;
+	} else if (intf == audio->as_intf) {
+		if (alt == 1) {
+			err = config_ep_by_speed(cdev->gadget, f, out_ep);
+			if (err)
+				return err;
+
+			usb_ep_enable(out_ep);
+			audio->copy_buf = f_audio_buffer_alloc(audio_buf_size);
+			if (IS_ERR(audio->copy_buf))
+				return -ENOMEM;
+
+			/*
+			 * allocate a bunch of read buffers
+			 * and queue them all at once.
+			 */
+			for (i = 0; i < req_count && err == 0; i++) {
+				req = usb_ep_alloc_request(out_ep, GFP_ATOMIC);
+				if (req) {
+					req->buf = kzalloc(req_buf_size,
+							GFP_ATOMIC);
+					if (req->buf) {
+						req->length = req_buf_size;
+						req->context = audio;
+						req->complete =
+							f_audio_complete;
+						err = usb_ep_queue(out_ep,
+							req, GFP_ATOMIC);
+						if (err)
+							ERROR(cdev,
+							"%s queue req: %d\n",
+							out_ep->name, err);
+					} else
+						err = -ENOMEM;
+				} else
+					err = -ENOMEM;
+			}
+
+		} else {
+			struct f_audio_buf *copy_buf = audio->copy_buf;
+			if (copy_buf) {
+				list_add_tail(&copy_buf->list,
+						&audio->play_queue);
+				schedule_work(&audio->playback_work);
+			}
+		}
+		audio->as_alt = alt;
+	}
+
+	return err;
+}
+
+static int f_audio_get_alt(struct usb_function *f, unsigned intf)
+{
+	struct f_audio		*audio = func_to_audio(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	if (intf == audio->ac_intf)
+		return audio->ac_alt;
+	else if (intf == audio->as_intf)
+		return audio->as_alt;
+	else
+		ERROR(cdev, "%s:%d Invalid Interface %d!\n",
+		      __func__, __LINE__, intf);
+
+	return -EINVAL;
+}
+
+static void f_audio_disable(struct usb_function *f)
+{
+	return;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void f_audio_build_desc(struct f_audio *audio)
+{
+	struct gaudio *card = &audio->card;
+	u8 *sam_freq;
+	int rate;
+
+	/* Set channel numbers */
+	input_terminal_desc.bNrChannels = u_audio_get_playback_channels(card);
+	as_type_i_desc.bNrChannels = u_audio_get_playback_channels(card);
+
+	/* Set sample rates */
+	rate = u_audio_get_playback_rate(card);
+	sam_freq = as_type_i_desc.tSamFreq[0];
+	memcpy(sam_freq, &rate, 3);
+
+	/* Todo: Set Sample bits and other parameters */
+
+	return;
+}
+
+/* audio function driver setup/binding */
+static int
+f_audio_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_audio		*audio = func_to_audio(f);
+	struct usb_string	*us;
+	int			status;
+	struct usb_ep		*ep = NULL;
+	struct f_uac1_legacy_opts	*audio_opts;
+
+	audio_opts = container_of(f->fi, struct f_uac1_legacy_opts, func_inst);
+	audio->card.gadget = c->cdev->gadget;
+	/* set up ASLA audio devices */
+	if (!audio_opts->bound) {
+		status = gaudio_setup(&audio->card);
+		if (status < 0)
+			return status;
+		audio_opts->bound = true;
+	}
+	us = usb_gstrings_attach(cdev, uac1_strings, ARRAY_SIZE(strings_uac1));
+	if (IS_ERR(us))
+		return PTR_ERR(us);
+	ac_interface_desc.iInterface = us[STR_AC_IF].id;
+	input_terminal_desc.iTerminal = us[STR_INPUT_TERMINAL].id;
+	input_terminal_desc.iChannelNames = us[STR_INPUT_TERMINAL_CH_NAMES].id;
+	feature_unit_desc.iFeature = us[STR_FEAT_DESC_0].id;
+	output_terminal_desc.iTerminal = us[STR_OUTPUT_TERMINAL].id;
+	as_interface_alt_0_desc.iInterface = us[STR_AS_IF_ALT0].id;
+	as_interface_alt_1_desc.iInterface = us[STR_AS_IF_ALT1].id;
+
+
+	f_audio_build_desc(audio);
+
+	/* allocate instance-specific interface IDs, and patch descriptors */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	ac_interface_desc.bInterfaceNumber = status;
+	audio->ac_intf = status;
+	audio->ac_alt = 0;
+
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	as_interface_alt_0_desc.bInterfaceNumber = status;
+	as_interface_alt_1_desc.bInterfaceNumber = status;
+	audio->as_intf = status;
+	audio->as_alt = 0;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	ep = usb_ep_autoconfig(cdev->gadget, &as_out_ep_desc);
+	if (!ep)
+		goto fail;
+	audio->out_ep = ep;
+	audio->out_ep->desc = &as_out_ep_desc;
+
+	/* copy descriptors, and track endpoint copies */
+	status = usb_assign_descriptors(f, f_audio_desc, f_audio_desc, NULL,
+					NULL);
+	if (status)
+		goto fail;
+	return 0;
+
+fail:
+	gaudio_cleanup(&audio->card);
+	return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value)
+{
+	con->data[cmd] = value;
+
+	return 0;
+}
+
+static int generic_get_cmd(struct usb_audio_control *con, u8 cmd)
+{
+	return con->data[cmd];
+}
+
+/* Todo: add more control selecotor dynamically */
+static int control_selector_init(struct f_audio *audio)
+{
+	INIT_LIST_HEAD(&audio->cs);
+	list_add(&feature_unit.list, &audio->cs);
+
+	INIT_LIST_HEAD(&feature_unit.control);
+	list_add(&mute_control.list, &feature_unit.control);
+	list_add(&volume_control.list, &feature_unit.control);
+
+	volume_control.data[UAC__CUR] = 0xffc0;
+	volume_control.data[UAC__MIN] = 0xe3a0;
+	volume_control.data[UAC__MAX] = 0xfff0;
+	volume_control.data[UAC__RES] = 0x0030;
+
+	return 0;
+}
+
+static inline
+struct f_uac1_legacy_opts *to_f_uac1_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_uac1_legacy_opts,
+			    func_inst.group);
+}
+
+static void f_uac1_attr_release(struct config_item *item)
+{
+	struct f_uac1_legacy_opts *opts = to_f_uac1_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations f_uac1_item_ops = {
+	.release	= f_uac1_attr_release,
+};
+
+#define UAC1_INT_ATTRIBUTE(name)					\
+static ssize_t f_uac1_opts_##name##_show(struct config_item *item,	\
+					 char *page)			\
+{									\
+	struct f_uac1_legacy_opts *opts = to_f_uac1_opts(item);		\
+	int result;							\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%u\n", opts->name);			\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t f_uac1_opts_##name##_store(struct config_item *item,		\
+					  const char *page, size_t len)	\
+{									\
+	struct f_uac1_legacy_opts *opts = to_f_uac1_opts(item);		\
+	int ret;							\
+	u32 num;							\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt) {						\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	ret = kstrtou32(page, 0, &num);					\
+	if (ret)							\
+		goto end;						\
+									\
+	opts->name = num;						\
+	ret = len;							\
+									\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+CONFIGFS_ATTR(f_uac1_opts_, name)
+
+UAC1_INT_ATTRIBUTE(req_buf_size);
+UAC1_INT_ATTRIBUTE(req_count);
+UAC1_INT_ATTRIBUTE(audio_buf_size);
+
+#define UAC1_STR_ATTRIBUTE(name)					\
+static ssize_t f_uac1_opts_##name##_show(struct config_item *item,	\
+					 char *page)			\
+{									\
+	struct f_uac1_legacy_opts *opts = to_f_uac1_opts(item);		\
+	int result;							\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%s\n", opts->name);			\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t f_uac1_opts_##name##_store(struct config_item *item,	\
+					  const char *page, size_t len)	\
+{									\
+	struct f_uac1_legacy_opts *opts = to_f_uac1_opts(item);		\
+	int ret = -EBUSY;						\
+	char *tmp;							\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt)						\
+		goto end;						\
+									\
+	tmp = kstrndup(page, len, GFP_KERNEL);				\
+	if (tmp) {							\
+		ret = -ENOMEM;						\
+		goto end;						\
+	}								\
+	if (opts->name##_alloc)						\
+		kfree(opts->name);					\
+	opts->name##_alloc = true;					\
+	opts->name = tmp;						\
+	ret = len;							\
+									\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+CONFIGFS_ATTR(f_uac1_opts_, name)
+
+UAC1_STR_ATTRIBUTE(fn_play);
+UAC1_STR_ATTRIBUTE(fn_cap);
+UAC1_STR_ATTRIBUTE(fn_cntl);
+
+static struct configfs_attribute *f_uac1_attrs[] = {
+	&f_uac1_opts_attr_req_buf_size,
+	&f_uac1_opts_attr_req_count,
+	&f_uac1_opts_attr_audio_buf_size,
+	&f_uac1_opts_attr_fn_play,
+	&f_uac1_opts_attr_fn_cap,
+	&f_uac1_opts_attr_fn_cntl,
+	NULL,
+};
+
+static const struct config_item_type f_uac1_func_type = {
+	.ct_item_ops	= &f_uac1_item_ops,
+	.ct_attrs	= f_uac1_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void f_audio_free_inst(struct usb_function_instance *f)
+{
+	struct f_uac1_legacy_opts *opts;
+
+	opts = container_of(f, struct f_uac1_legacy_opts, func_inst);
+	if (opts->fn_play_alloc)
+		kfree(opts->fn_play);
+	if (opts->fn_cap_alloc)
+		kfree(opts->fn_cap);
+	if (opts->fn_cntl_alloc)
+		kfree(opts->fn_cntl);
+	kfree(opts);
+}
+
+static struct usb_function_instance *f_audio_alloc_inst(void)
+{
+	struct f_uac1_legacy_opts *opts;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&opts->lock);
+	opts->func_inst.free_func_inst = f_audio_free_inst;
+
+	config_group_init_type_name(&opts->func_inst.group, "",
+				    &f_uac1_func_type);
+
+	opts->req_buf_size = UAC1_OUT_EP_MAX_PACKET_SIZE;
+	opts->req_count = UAC1_REQ_COUNT;
+	opts->audio_buf_size = UAC1_AUDIO_BUF_SIZE;
+	opts->fn_play = FILE_PCM_PLAYBACK;
+	opts->fn_cap = FILE_PCM_CAPTURE;
+	opts->fn_cntl = FILE_CONTROL;
+	return &opts->func_inst;
+}
+
+static void f_audio_free(struct usb_function *f)
+{
+	struct f_audio *audio = func_to_audio(f);
+	struct f_uac1_legacy_opts *opts;
+
+	gaudio_cleanup(&audio->card);
+	opts = container_of(f->fi, struct f_uac1_legacy_opts, func_inst);
+	kfree(audio);
+	mutex_lock(&opts->lock);
+	--opts->refcnt;
+	mutex_unlock(&opts->lock);
+}
+
+static void f_audio_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	usb_free_all_descriptors(f);
+}
+
+static struct usb_function *f_audio_alloc(struct usb_function_instance *fi)
+{
+	struct f_audio *audio;
+	struct f_uac1_legacy_opts *opts;
+
+	/* allocate and initialize one new instance */
+	audio = kzalloc(sizeof(*audio), GFP_KERNEL);
+	if (!audio)
+		return ERR_PTR(-ENOMEM);
+
+	audio->card.func.name = "g_audio";
+
+	opts = container_of(fi, struct f_uac1_legacy_opts, func_inst);
+	mutex_lock(&opts->lock);
+	++opts->refcnt;
+	mutex_unlock(&opts->lock);
+	INIT_LIST_HEAD(&audio->play_queue);
+	spin_lock_init(&audio->lock);
+
+	audio->card.func.bind = f_audio_bind;
+	audio->card.func.unbind = f_audio_unbind;
+	audio->card.func.set_alt = f_audio_set_alt;
+	audio->card.func.get_alt = f_audio_get_alt;
+	audio->card.func.setup = f_audio_setup;
+	audio->card.func.disable = f_audio_disable;
+	audio->card.func.free_func = f_audio_free;
+
+	control_selector_init(audio);
+
+	INIT_WORK(&audio->playback_work, f_audio_playback_work);
+
+	return &audio->card.func;
+}
+
+DECLARE_USB_FUNCTION_INIT(uac1_legacy, f_audio_alloc_inst, f_audio_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Bryan Wu");
diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
new file mode 100644
index 000000000..0219cd794
--- /dev/null
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -0,0 +1,2245 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_uac2.c -- USB Audio Class 2.0 Function
+ *
+ * Copyright (C) 2011
+ *    Yadwinder Singh (yadi.brar01@gmail.com)
+ *    Jaswinder Singh (jaswinder.singh@linaro.org)
+ *
+ * Copyright (C) 2020
+ *    Ruslan Bilovol (ruslan.bilovol@gmail.com)
+ */
+
+#include <linux/usb/audio.h>
+#include <linux/usb/audio-v2.h>
+#include <linux/module.h>
+
+#include "u_audio.h"
+
+#include "u_uac2.h"
+
+/* UAC2 spec: 4.1 Audio Channel Cluster Descriptor */
+#define UAC2_CHANNEL_MASK 0x07FFFFFF
+
+/*
+ * The driver implements a simple UAC_2 topology.
+ * USB-OUT -> IT_1 -> FU -> OT_3 -> ALSA_Capture
+ * ALSA_Playback -> IT_2 -> FU -> OT_4 -> USB-IN
+ * Capture and Playback sampling rates are independently
+ *  controlled by two clock sources :
+ *    CLK_5 := c_srate, and CLK_6 := p_srate
+ */
+#define USB_OUT_CLK_ID	(out_clk_src_desc.bClockID)
+#define USB_IN_CLK_ID	(in_clk_src_desc.bClockID)
+#define USB_OUT_FU_ID	(out_feature_unit_desc->bUnitID)
+#define USB_IN_FU_ID	(in_feature_unit_desc->bUnitID)
+
+#define CONTROL_ABSENT	0
+#define CONTROL_RDONLY	1
+#define CONTROL_RDWR	3
+
+#define CLK_FREQ_CTRL	0
+#define CLK_VLD_CTRL	2
+#define FU_MUTE_CTRL	0
+#define FU_VOL_CTRL	2
+
+#define COPY_CTRL	0
+#define CONN_CTRL	2
+#define OVRLD_CTRL	4
+#define CLSTR_CTRL	6
+#define UNFLW_CTRL	8
+#define OVFLW_CTRL	10
+
+#define EPIN_EN(_opts) ((_opts)->p_chmask != 0)
+#define EPOUT_EN(_opts) ((_opts)->c_chmask != 0)
+#define FUIN_EN(_opts) (EPIN_EN(_opts) \
+				&& ((_opts)->p_mute_present \
+				|| (_opts)->p_volume_present))
+#define FUOUT_EN(_opts) (EPOUT_EN(_opts) \
+				&& ((_opts)->c_mute_present \
+				|| (_opts)->c_volume_present))
+#define EPOUT_FBACK_IN_EN(_opts) ((_opts)->c_sync == USB_ENDPOINT_SYNC_ASYNC)
+
+struct f_uac2 {
+	struct g_audio g_audio;
+	u8 ac_intf, as_in_intf, as_out_intf;
+	u8 ac_alt, as_in_alt, as_out_alt;	/* needed for get_alt() */
+
+	struct usb_ctrlrequest setup_cr;	/* will be used in data stage */
+
+	/* Interrupt IN endpoint of AC interface */
+	struct usb_ep	*int_ep;
+	atomic_t	int_count;
+	/* transient state, only valid during handling of a single control request */
+	int clock_id;
+};
+
+static inline struct f_uac2 *func_to_uac2(struct usb_function *f)
+{
+	return container_of(f, struct f_uac2, g_audio.func);
+}
+
+static inline
+struct f_uac2_opts *g_audio_to_uac2_opts(struct g_audio *agdev)
+{
+	return container_of(agdev->func.fi, struct f_uac2_opts, func_inst);
+}
+
+static int afunc_notify(struct g_audio *agdev, int unit_id, int cs);
+
+/* --------- USB Function Interface ------------- */
+
+enum {
+	STR_ASSOC,
+	STR_IF_CTRL,
+	STR_CLKSRC_IN,
+	STR_CLKSRC_OUT,
+	STR_USB_IT,
+	STR_IO_IT,
+	STR_USB_OT,
+	STR_IO_OT,
+	STR_FU_IN,
+	STR_FU_OUT,
+	STR_AS_OUT_ALT0,
+	STR_AS_OUT_ALT1,
+	STR_AS_IN_ALT0,
+	STR_AS_IN_ALT1,
+};
+
+static struct usb_string strings_fn[] = {
+	/* [STR_ASSOC].s = DYNAMIC, */
+	[STR_IF_CTRL].s = "Topology Control",
+	[STR_CLKSRC_IN].s = "Input Clock",
+	[STR_CLKSRC_OUT].s = "Output Clock",
+	[STR_USB_IT].s = "USBH Out",
+	[STR_IO_IT].s = "USBD Out",
+	[STR_USB_OT].s = "USBH In",
+	[STR_IO_OT].s = "USBD In",
+	[STR_FU_IN].s = "Capture Volume",
+	[STR_FU_OUT].s = "Playback Volume",
+	[STR_AS_OUT_ALT0].s = "Playback Inactive",
+	[STR_AS_OUT_ALT1].s = "Playback Active",
+	[STR_AS_IN_ALT0].s = "Capture Inactive",
+	[STR_AS_IN_ALT1].s = "Capture Active",
+	{ },
+};
+
+static const char *const speed_names[] = {
+	[USB_SPEED_UNKNOWN] = "UNKNOWN",
+	[USB_SPEED_LOW] = "LS",
+	[USB_SPEED_FULL] = "FS",
+	[USB_SPEED_HIGH] = "HS",
+	[USB_SPEED_WIRELESS] = "W",
+	[USB_SPEED_SUPER] = "SS",
+	[USB_SPEED_SUPER_PLUS] = "SS+",
+};
+
+static struct usb_gadget_strings str_fn = {
+	.language = 0x0409,	/* en-us */
+	.strings = strings_fn,
+};
+
+static struct usb_gadget_strings *fn_strings[] = {
+	&str_fn,
+	NULL,
+};
+
+static struct usb_interface_assoc_descriptor iad_desc = {
+	.bLength = sizeof iad_desc,
+	.bDescriptorType = USB_DT_INTERFACE_ASSOCIATION,
+
+	.bFirstInterface = 0,
+	.bInterfaceCount = 3,
+	.bFunctionClass = USB_CLASS_AUDIO,
+	.bFunctionSubClass = UAC2_FUNCTION_SUBCLASS_UNDEFINED,
+	.bFunctionProtocol = UAC_VERSION_2,
+};
+
+/* Audio Control Interface */
+static struct usb_interface_descriptor std_ac_if_desc = {
+	.bLength = sizeof std_ac_if_desc,
+	.bDescriptorType = USB_DT_INTERFACE,
+
+	.bAlternateSetting = 0,
+	/* .bNumEndpoints = DYNAMIC */
+	.bInterfaceClass = USB_CLASS_AUDIO,
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
+	.bInterfaceProtocol = UAC_VERSION_2,
+};
+
+/* Clock source for IN traffic */
+static struct uac_clock_source_descriptor in_clk_src_desc = {
+	.bLength = sizeof in_clk_src_desc,
+	.bDescriptorType = USB_DT_CS_INTERFACE,
+
+	.bDescriptorSubtype = UAC2_CLOCK_SOURCE,
+	/* .bClockID = DYNAMIC */
+	.bmAttributes = UAC_CLOCK_SOURCE_TYPE_INT_FIXED,
+	.bmControls = (CONTROL_RDWR << CLK_FREQ_CTRL),
+	.bAssocTerminal = 0,
+};
+
+/* Clock source for OUT traffic */
+static struct uac_clock_source_descriptor out_clk_src_desc = {
+	.bLength = sizeof out_clk_src_desc,
+	.bDescriptorType = USB_DT_CS_INTERFACE,
+
+	.bDescriptorSubtype = UAC2_CLOCK_SOURCE,
+	/* .bClockID = DYNAMIC */
+	.bmAttributes = UAC_CLOCK_SOURCE_TYPE_INT_FIXED,
+	.bmControls = (CONTROL_RDWR << CLK_FREQ_CTRL),
+	.bAssocTerminal = 0,
+};
+
+/* Input Terminal for USB_OUT */
+static struct uac2_input_terminal_descriptor usb_out_it_desc = {
+	.bLength = sizeof usb_out_it_desc,
+	.bDescriptorType = USB_DT_CS_INTERFACE,
+
+	.bDescriptorSubtype = UAC_INPUT_TERMINAL,
+	/* .bTerminalID = DYNAMIC */
+	.wTerminalType = cpu_to_le16(UAC_TERMINAL_STREAMING),
+	.bAssocTerminal = 0,
+	/* .bCSourceID = DYNAMIC */
+	.iChannelNames = 0,
+	.bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL),
+};
+
+/* Input Terminal for I/O-In */
+static struct uac2_input_terminal_descriptor io_in_it_desc = {
+	.bLength = sizeof io_in_it_desc,
+	.bDescriptorType = USB_DT_CS_INTERFACE,
+
+	.bDescriptorSubtype = UAC_INPUT_TERMINAL,
+	/* .bTerminalID = DYNAMIC */
+	.wTerminalType = cpu_to_le16(UAC_INPUT_TERMINAL_MICROPHONE),
+	.bAssocTerminal = 0,
+	/* .bCSourceID = DYNAMIC */
+	.iChannelNames = 0,
+	.bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL),
+};
+
+/* Ouput Terminal for USB_IN */
+static struct uac2_output_terminal_descriptor usb_in_ot_desc = {
+	.bLength = sizeof usb_in_ot_desc,
+	.bDescriptorType = USB_DT_CS_INTERFACE,
+
+	.bDescriptorSubtype = UAC_OUTPUT_TERMINAL,
+	/* .bTerminalID = DYNAMIC */
+	.wTerminalType = cpu_to_le16(UAC_TERMINAL_STREAMING),
+	.bAssocTerminal = 0,
+	/* .bSourceID = DYNAMIC */
+	/* .bCSourceID = DYNAMIC */
+	.bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL),
+};
+
+/* Ouput Terminal for I/O-Out */
+static struct uac2_output_terminal_descriptor io_out_ot_desc = {
+	.bLength = sizeof io_out_ot_desc,
+	.bDescriptorType = USB_DT_CS_INTERFACE,
+
+	.bDescriptorSubtype = UAC_OUTPUT_TERMINAL,
+	/* .bTerminalID = DYNAMIC */
+	.wTerminalType = cpu_to_le16(UAC_OUTPUT_TERMINAL_SPEAKER),
+	.bAssocTerminal = 0,
+	/* .bSourceID = DYNAMIC */
+	/* .bCSourceID = DYNAMIC */
+	.bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL),
+};
+
+static struct uac2_feature_unit_descriptor *in_feature_unit_desc;
+static struct uac2_feature_unit_descriptor *out_feature_unit_desc;
+
+static struct uac2_ac_header_descriptor ac_hdr_desc = {
+	.bLength = sizeof ac_hdr_desc,
+	.bDescriptorType = USB_DT_CS_INTERFACE,
+
+	.bDescriptorSubtype = UAC_MS_HEADER,
+	.bcdADC = cpu_to_le16(0x200),
+	.bCategory = UAC2_FUNCTION_IO_BOX,
+	/* .wTotalLength = DYNAMIC */
+	.bmControls = 0,
+};
+
+/* AC IN Interrupt Endpoint */
+static struct usb_endpoint_descriptor fs_ep_int_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bEndpointAddress = USB_DIR_IN,
+	.bmAttributes = USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize = cpu_to_le16(6),
+	.bInterval = 1,
+};
+
+static struct usb_endpoint_descriptor hs_ep_int_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bmAttributes = USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize = cpu_to_le16(6),
+	.bInterval = 4,
+};
+
+static struct usb_endpoint_descriptor ss_ep_int_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bEndpointAddress = USB_DIR_IN,
+	.bmAttributes = USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize = cpu_to_le16(6),
+	.bInterval = 4,
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ep_int_desc_comp = {
+	.bLength = sizeof(ss_ep_int_desc_comp),
+	.bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
+	.wBytesPerInterval = cpu_to_le16(6),
+};
+
+/* Audio Streaming OUT Interface - Alt0 */
+static struct usb_interface_descriptor std_as_out_if0_desc = {
+	.bLength = sizeof std_as_out_if0_desc,
+	.bDescriptorType = USB_DT_INTERFACE,
+
+	.bAlternateSetting = 0,
+	.bNumEndpoints = 0,
+	.bInterfaceClass = USB_CLASS_AUDIO,
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIOSTREAMING,
+	.bInterfaceProtocol = UAC_VERSION_2,
+};
+
+/* Audio Streaming OUT Interface - Alt1 */
+static struct usb_interface_descriptor std_as_out_if1_desc = {
+	.bLength = sizeof std_as_out_if1_desc,
+	.bDescriptorType = USB_DT_INTERFACE,
+
+	.bAlternateSetting = 1,
+	.bNumEndpoints = 1,
+	.bInterfaceClass = USB_CLASS_AUDIO,
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIOSTREAMING,
+	.bInterfaceProtocol = UAC_VERSION_2,
+};
+
+/* Audio Stream OUT Intface Desc */
+static struct uac2_as_header_descriptor as_out_hdr_desc = {
+	.bLength = sizeof as_out_hdr_desc,
+	.bDescriptorType = USB_DT_CS_INTERFACE,
+
+	.bDescriptorSubtype = UAC_AS_GENERAL,
+	/* .bTerminalLink = DYNAMIC */
+	.bmControls = 0,
+	.bFormatType = UAC_FORMAT_TYPE_I,
+	.bmFormats = cpu_to_le32(UAC_FORMAT_TYPE_I_PCM),
+	.iChannelNames = 0,
+};
+
+/* Audio USB_OUT Format */
+static struct uac2_format_type_i_descriptor as_out_fmt1_desc = {
+	.bLength = sizeof as_out_fmt1_desc,
+	.bDescriptorType = USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype = UAC_FORMAT_TYPE,
+	.bFormatType = UAC_FORMAT_TYPE_I,
+};
+
+/* STD AS ISO OUT Endpoint */
+static struct usb_endpoint_descriptor fs_epout_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bEndpointAddress = USB_DIR_OUT,
+	/* .bmAttributes = DYNAMIC */
+	/* .wMaxPacketSize = DYNAMIC */
+	.bInterval = 1,
+};
+
+static struct usb_endpoint_descriptor hs_epout_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	/* .bmAttributes = DYNAMIC */
+	/* .wMaxPacketSize = DYNAMIC */
+	/* .bInterval = DYNAMIC */
+};
+
+static struct usb_endpoint_descriptor ss_epout_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bEndpointAddress = USB_DIR_OUT,
+	/* .bmAttributes = DYNAMIC */
+	/* .wMaxPacketSize = DYNAMIC */
+	/* .bInterval = DYNAMIC */
+};
+
+static struct usb_ss_ep_comp_descriptor ss_epout_desc_comp = {
+	.bLength		= sizeof(ss_epout_desc_comp),
+	.bDescriptorType	= USB_DT_SS_ENDPOINT_COMP,
+	.bMaxBurst		= 0,
+	.bmAttributes		= 0,
+	/* wBytesPerInterval = DYNAMIC */
+};
+
+/* CS AS ISO OUT Endpoint */
+static struct uac2_iso_endpoint_descriptor as_iso_out_desc = {
+	.bLength = sizeof as_iso_out_desc,
+	.bDescriptorType = USB_DT_CS_ENDPOINT,
+
+	.bDescriptorSubtype = UAC_EP_GENERAL,
+	.bmAttributes = 0,
+	.bmControls = 0,
+	.bLockDelayUnits = 0,
+	.wLockDelay = 0,
+};
+
+/* STD AS ISO IN Feedback Endpoint */
+static struct usb_endpoint_descriptor fs_epin_fback_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bEndpointAddress = USB_DIR_IN,
+	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_USAGE_FEEDBACK,
+	.wMaxPacketSize = cpu_to_le16(3),
+	.bInterval = 1,
+};
+
+static struct usb_endpoint_descriptor hs_epin_fback_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_USAGE_FEEDBACK,
+	.wMaxPacketSize = cpu_to_le16(4),
+	.bInterval = 4,
+};
+
+static struct usb_endpoint_descriptor ss_epin_fback_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bEndpointAddress = USB_DIR_IN,
+	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_USAGE_FEEDBACK,
+	.wMaxPacketSize = cpu_to_le16(4),
+	.bInterval = 4,
+};
+
+static struct usb_ss_ep_comp_descriptor ss_epin_fback_desc_comp = {
+	.bLength		= sizeof(ss_epin_fback_desc_comp),
+	.bDescriptorType	= USB_DT_SS_ENDPOINT_COMP,
+	.bMaxBurst		= 0,
+	.bmAttributes		= 0,
+	.wBytesPerInterval	= cpu_to_le16(4),
+};
+
+
+/* Audio Streaming IN Interface - Alt0 */
+static struct usb_interface_descriptor std_as_in_if0_desc = {
+	.bLength = sizeof std_as_in_if0_desc,
+	.bDescriptorType = USB_DT_INTERFACE,
+
+	.bAlternateSetting = 0,
+	.bNumEndpoints = 0,
+	.bInterfaceClass = USB_CLASS_AUDIO,
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIOSTREAMING,
+	.bInterfaceProtocol = UAC_VERSION_2,
+};
+
+/* Audio Streaming IN Interface - Alt1 */
+static struct usb_interface_descriptor std_as_in_if1_desc = {
+	.bLength = sizeof std_as_in_if1_desc,
+	.bDescriptorType = USB_DT_INTERFACE,
+
+	.bAlternateSetting = 1,
+	.bNumEndpoints = 1,
+	.bInterfaceClass = USB_CLASS_AUDIO,
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIOSTREAMING,
+	.bInterfaceProtocol = UAC_VERSION_2,
+};
+
+/* Audio Stream IN Intface Desc */
+static struct uac2_as_header_descriptor as_in_hdr_desc = {
+	.bLength = sizeof as_in_hdr_desc,
+	.bDescriptorType = USB_DT_CS_INTERFACE,
+
+	.bDescriptorSubtype = UAC_AS_GENERAL,
+	/* .bTerminalLink = DYNAMIC */
+	.bmControls = 0,
+	.bFormatType = UAC_FORMAT_TYPE_I,
+	.bmFormats = cpu_to_le32(UAC_FORMAT_TYPE_I_PCM),
+	.iChannelNames = 0,
+};
+
+/* Audio USB_IN Format */
+static struct uac2_format_type_i_descriptor as_in_fmt1_desc = {
+	.bLength = sizeof as_in_fmt1_desc,
+	.bDescriptorType = USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype = UAC_FORMAT_TYPE,
+	.bFormatType = UAC_FORMAT_TYPE_I,
+};
+
+/* STD AS ISO IN Endpoint */
+static struct usb_endpoint_descriptor fs_epin_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bEndpointAddress = USB_DIR_IN,
+	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+	/* .wMaxPacketSize = DYNAMIC */
+	.bInterval = 1,
+};
+
+static struct usb_endpoint_descriptor hs_epin_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+	/* .wMaxPacketSize = DYNAMIC */
+	/* .bInterval = DYNAMIC */
+};
+
+static struct usb_endpoint_descriptor ss_epin_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bEndpointAddress = USB_DIR_IN,
+	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+	/* .wMaxPacketSize = DYNAMIC */
+	/* .bInterval = DYNAMIC */
+};
+
+static struct usb_ss_ep_comp_descriptor ss_epin_desc_comp = {
+	.bLength		= sizeof(ss_epin_desc_comp),
+	.bDescriptorType	= USB_DT_SS_ENDPOINT_COMP,
+	.bMaxBurst		= 0,
+	.bmAttributes		= 0,
+	/* wBytesPerInterval = DYNAMIC */
+};
+
+/* CS AS ISO IN Endpoint */
+static struct uac2_iso_endpoint_descriptor as_iso_in_desc = {
+	.bLength = sizeof as_iso_in_desc,
+	.bDescriptorType = USB_DT_CS_ENDPOINT,
+
+	.bDescriptorSubtype = UAC_EP_GENERAL,
+	.bmAttributes = 0,
+	.bmControls = 0,
+	.bLockDelayUnits = 0,
+	.wLockDelay = 0,
+};
+
+static struct usb_descriptor_header *fs_audio_desc[] = {
+	(struct usb_descriptor_header *)&iad_desc,
+	(struct usb_descriptor_header *)&std_ac_if_desc,
+
+	(struct usb_descriptor_header *)&ac_hdr_desc,
+	(struct usb_descriptor_header *)&in_clk_src_desc,
+	(struct usb_descriptor_header *)&out_clk_src_desc,
+	(struct usb_descriptor_header *)&usb_out_it_desc,
+	(struct usb_descriptor_header *)&out_feature_unit_desc,
+	(struct usb_descriptor_header *)&io_in_it_desc,
+	(struct usb_descriptor_header *)&usb_in_ot_desc,
+	(struct usb_descriptor_header *)&in_feature_unit_desc,
+	(struct usb_descriptor_header *)&io_out_ot_desc,
+
+	(struct usb_descriptor_header *)&fs_ep_int_desc,
+
+	(struct usb_descriptor_header *)&std_as_out_if0_desc,
+	(struct usb_descriptor_header *)&std_as_out_if1_desc,
+
+	(struct usb_descriptor_header *)&as_out_hdr_desc,
+	(struct usb_descriptor_header *)&as_out_fmt1_desc,
+	(struct usb_descriptor_header *)&fs_epout_desc,
+	(struct usb_descriptor_header *)&as_iso_out_desc,
+	(struct usb_descriptor_header *)&fs_epin_fback_desc,
+
+	(struct usb_descriptor_header *)&std_as_in_if0_desc,
+	(struct usb_descriptor_header *)&std_as_in_if1_desc,
+
+	(struct usb_descriptor_header *)&as_in_hdr_desc,
+	(struct usb_descriptor_header *)&as_in_fmt1_desc,
+	(struct usb_descriptor_header *)&fs_epin_desc,
+	(struct usb_descriptor_header *)&as_iso_in_desc,
+	NULL,
+};
+
+static struct usb_descriptor_header *hs_audio_desc[] = {
+	(struct usb_descriptor_header *)&iad_desc,
+	(struct usb_descriptor_header *)&std_ac_if_desc,
+
+	(struct usb_descriptor_header *)&ac_hdr_desc,
+	(struct usb_descriptor_header *)&in_clk_src_desc,
+	(struct usb_descriptor_header *)&out_clk_src_desc,
+	(struct usb_descriptor_header *)&usb_out_it_desc,
+	(struct usb_descriptor_header *)&out_feature_unit_desc,
+	(struct usb_descriptor_header *)&io_in_it_desc,
+	(struct usb_descriptor_header *)&usb_in_ot_desc,
+	(struct usb_descriptor_header *)&in_feature_unit_desc,
+	(struct usb_descriptor_header *)&io_out_ot_desc,
+
+	(struct usb_descriptor_header *)&hs_ep_int_desc,
+
+	(struct usb_descriptor_header *)&std_as_out_if0_desc,
+	(struct usb_descriptor_header *)&std_as_out_if1_desc,
+
+	(struct usb_descriptor_header *)&as_out_hdr_desc,
+	(struct usb_descriptor_header *)&as_out_fmt1_desc,
+	(struct usb_descriptor_header *)&hs_epout_desc,
+	(struct usb_descriptor_header *)&as_iso_out_desc,
+	(struct usb_descriptor_header *)&hs_epin_fback_desc,
+
+	(struct usb_descriptor_header *)&std_as_in_if0_desc,
+	(struct usb_descriptor_header *)&std_as_in_if1_desc,
+
+	(struct usb_descriptor_header *)&as_in_hdr_desc,
+	(struct usb_descriptor_header *)&as_in_fmt1_desc,
+	(struct usb_descriptor_header *)&hs_epin_desc,
+	(struct usb_descriptor_header *)&as_iso_in_desc,
+	NULL,
+};
+
+static struct usb_descriptor_header *ss_audio_desc[] = {
+	(struct usb_descriptor_header *)&iad_desc,
+	(struct usb_descriptor_header *)&std_ac_if_desc,
+
+	(struct usb_descriptor_header *)&ac_hdr_desc,
+	(struct usb_descriptor_header *)&in_clk_src_desc,
+	(struct usb_descriptor_header *)&out_clk_src_desc,
+	(struct usb_descriptor_header *)&usb_out_it_desc,
+  (struct usb_descriptor_header *)&out_feature_unit_desc,
+	(struct usb_descriptor_header *)&io_in_it_desc,
+	(struct usb_descriptor_header *)&usb_in_ot_desc,
+	(struct usb_descriptor_header *)&in_feature_unit_desc,
+	(struct usb_descriptor_header *)&io_out_ot_desc,
+
+	(struct usb_descriptor_header *)&ss_ep_int_desc,
+	(struct usb_descriptor_header *)&ss_ep_int_desc_comp,
+
+	(struct usb_descriptor_header *)&std_as_out_if0_desc,
+	(struct usb_descriptor_header *)&std_as_out_if1_desc,
+
+	(struct usb_descriptor_header *)&as_out_hdr_desc,
+	(struct usb_descriptor_header *)&as_out_fmt1_desc,
+	(struct usb_descriptor_header *)&ss_epout_desc,
+	(struct usb_descriptor_header *)&ss_epout_desc_comp,
+	(struct usb_descriptor_header *)&as_iso_out_desc,
+	(struct usb_descriptor_header *)&ss_epin_fback_desc,
+	(struct usb_descriptor_header *)&ss_epin_fback_desc_comp,
+
+	(struct usb_descriptor_header *)&std_as_in_if0_desc,
+	(struct usb_descriptor_header *)&std_as_in_if1_desc,
+
+	(struct usb_descriptor_header *)&as_in_hdr_desc,
+	(struct usb_descriptor_header *)&as_in_fmt1_desc,
+	(struct usb_descriptor_header *)&ss_epin_desc,
+	(struct usb_descriptor_header *)&ss_epin_desc_comp,
+	(struct usb_descriptor_header *)&as_iso_in_desc,
+	NULL,
+};
+
+struct cntrl_cur_lay2 {
+	__le16	wCUR;
+};
+
+struct cntrl_range_lay2 {
+	__le16	wNumSubRanges;
+	__le16	wMIN;
+	__le16	wMAX;
+	__le16	wRES;
+} __packed;
+
+struct cntrl_cur_lay3 {
+	__le32	dCUR;
+};
+
+struct cntrl_subrange_lay3 {
+	__le32	dMIN;
+	__le32	dMAX;
+	__le32	dRES;
+} __packed;
+
+#define ranges_lay3_size(c) (sizeof(c.wNumSubRanges)	\
+		+ le16_to_cpu(c.wNumSubRanges)		\
+		* sizeof(struct cntrl_subrange_lay3))
+
+#define DECLARE_UAC2_CNTRL_RANGES_LAY3(k, n)		\
+	struct cntrl_ranges_lay3_##k {			\
+	__le16	wNumSubRanges;				\
+	struct cntrl_subrange_lay3 r[n];		\
+} __packed
+
+DECLARE_UAC2_CNTRL_RANGES_LAY3(srates, UAC_MAX_RATES);
+
+static int get_max_srate(const int *srates)
+{
+	int i, max_srate = 0;
+
+	for (i = 0; i < UAC_MAX_RATES; i++) {
+		if (srates[i] == 0)
+			break;
+		if (srates[i] > max_srate)
+			max_srate = srates[i];
+	}
+	return max_srate;
+}
+
+static int get_max_bw_for_bint(const struct f_uac2_opts *uac2_opts,
+	u8 bint, unsigned int factor, bool is_playback)
+{
+	int chmask, srate, ssize;
+	u16 max_size_bw;
+
+	if (is_playback) {
+		chmask = uac2_opts->p_chmask;
+		srate = get_max_srate(uac2_opts->p_srates);
+		ssize = uac2_opts->p_ssize;
+	} else {
+		chmask = uac2_opts->c_chmask;
+		srate = get_max_srate(uac2_opts->c_srates);
+		ssize = uac2_opts->c_ssize;
+	}
+
+	if (is_playback || (uac2_opts->c_sync == USB_ENDPOINT_SYNC_ASYNC)) {
+		// playback is always async, capture only when configured
+		// Win10 requires max packet size + 1 frame
+		srate = srate * (1000 + uac2_opts->fb_max) / 1000;
+		// updated srate is always bigger, therefore DIV_ROUND_UP always yields +1
+		max_size_bw = num_channels(chmask) * ssize *
+			(DIV_ROUND_UP(srate, factor / (1 << (bint - 1))));
+	} else {
+		// adding 1 frame provision for Win10
+		max_size_bw = num_channels(chmask) * ssize *
+			(DIV_ROUND_UP(srate, factor / (1 << (bint - 1))) + 1);
+	}
+	return max_size_bw;
+}
+
+static int set_ep_max_packet_size_bint(struct device *dev, const struct f_uac2_opts *uac2_opts,
+	struct usb_endpoint_descriptor *ep_desc,
+	enum usb_device_speed speed, bool is_playback)
+{
+	u16 max_size_bw, max_size_ep;
+	u8 bint, opts_bint;
+	char *dir;
+
+	switch (speed) {
+	case USB_SPEED_FULL:
+		max_size_ep = 1023;
+		// fixed
+		bint = ep_desc->bInterval;
+		max_size_bw = get_max_bw_for_bint(uac2_opts, bint, 1000, is_playback);
+		break;
+
+	case USB_SPEED_HIGH:
+	case USB_SPEED_SUPER:
+		max_size_ep = 1024;
+		if (is_playback)
+			opts_bint = uac2_opts->p_hs_bint;
+		else
+			opts_bint = uac2_opts->c_hs_bint;
+
+		if (opts_bint > 0) {
+			/* fixed bint */
+			bint = opts_bint;
+			max_size_bw = get_max_bw_for_bint(uac2_opts, bint, 8000, is_playback);
+		} else {
+			/* checking bInterval from 4 to 1 whether the required bandwidth fits */
+			for (bint = 4; bint > 0; --bint) {
+				max_size_bw = get_max_bw_for_bint(
+					uac2_opts, bint, 8000, is_playback);
+				if (max_size_bw <= max_size_ep)
+					break;
+			}
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (is_playback)
+		dir = "Playback";
+	else
+		dir = "Capture";
+
+	if (max_size_bw <= max_size_ep)
+		dev_dbg(dev,
+			"%s %s: Would use wMaxPacketSize %d and bInterval %d\n",
+			speed_names[speed], dir, max_size_bw, bint);
+	else {
+		dev_warn(dev,
+			"%s %s: Req. wMaxPacketSize %d at bInterval %d > max ISOC %d, may drop data!\n",
+			speed_names[speed], dir, max_size_bw, bint, max_size_ep);
+		max_size_bw = max_size_ep;
+	}
+
+	ep_desc->wMaxPacketSize = cpu_to_le16(max_size_bw);
+	ep_desc->bInterval = bint;
+
+	return 0;
+}
+
+static struct uac2_feature_unit_descriptor *build_fu_desc(int chmask)
+{
+	struct uac2_feature_unit_descriptor *fu_desc;
+	int channels = num_channels(chmask);
+	int fu_desc_size = UAC2_DT_FEATURE_UNIT_SIZE(channels);
+
+	fu_desc = kzalloc(fu_desc_size, GFP_KERNEL);
+	if (!fu_desc)
+		return NULL;
+
+	fu_desc->bLength = fu_desc_size;
+	fu_desc->bDescriptorType = USB_DT_CS_INTERFACE;
+
+	fu_desc->bDescriptorSubtype = UAC_FEATURE_UNIT;
+
+	/* bUnitID, bSourceID and bmaControls will be defined later */
+
+	return fu_desc;
+}
+
+/* Use macro to overcome line length limitation */
+#define USBDHDR(p) (struct usb_descriptor_header *)(p)
+
+static void setup_headers(struct f_uac2_opts *opts,
+			  struct usb_descriptor_header **headers,
+			  enum usb_device_speed speed)
+{
+	struct usb_ss_ep_comp_descriptor *epout_desc_comp = NULL;
+	struct usb_ss_ep_comp_descriptor *epin_desc_comp = NULL;
+	struct usb_ss_ep_comp_descriptor *epin_fback_desc_comp = NULL;
+	struct usb_ss_ep_comp_descriptor *ep_int_desc_comp = NULL;
+	struct usb_endpoint_descriptor *epout_desc;
+	struct usb_endpoint_descriptor *epin_desc;
+	struct usb_endpoint_descriptor *epin_fback_desc;
+	struct usb_endpoint_descriptor *ep_int_desc;
+	int i;
+
+	switch (speed) {
+	case USB_SPEED_FULL:
+		epout_desc = &fs_epout_desc;
+		epin_desc = &fs_epin_desc;
+		epin_fback_desc = &fs_epin_fback_desc;
+		ep_int_desc = &fs_ep_int_desc;
+		break;
+	case USB_SPEED_HIGH:
+		epout_desc = &hs_epout_desc;
+		epin_desc = &hs_epin_desc;
+		epin_fback_desc = &hs_epin_fback_desc;
+		ep_int_desc = &hs_ep_int_desc;
+		break;
+	default:
+		epout_desc = &ss_epout_desc;
+		epin_desc = &ss_epin_desc;
+		epout_desc_comp = &ss_epout_desc_comp;
+		epin_desc_comp = &ss_epin_desc_comp;
+		epin_fback_desc = &ss_epin_fback_desc;
+		epin_fback_desc_comp = &ss_epin_fback_desc_comp;
+		ep_int_desc = &ss_ep_int_desc;
+		ep_int_desc_comp = &ss_ep_int_desc_comp;
+	}
+
+	i = 0;
+	headers[i++] = USBDHDR(&iad_desc);
+	headers[i++] = USBDHDR(&std_ac_if_desc);
+	headers[i++] = USBDHDR(&ac_hdr_desc);
+	if (EPIN_EN(opts))
+		headers[i++] = USBDHDR(&in_clk_src_desc);
+	if (EPOUT_EN(opts)) {
+		headers[i++] = USBDHDR(&out_clk_src_desc);
+		headers[i++] = USBDHDR(&usb_out_it_desc);
+
+		if (FUOUT_EN(opts))
+			headers[i++] = USBDHDR(out_feature_unit_desc);
+	}
+
+	if (EPIN_EN(opts)) {
+		headers[i++] = USBDHDR(&io_in_it_desc);
+
+		if (FUIN_EN(opts))
+			headers[i++] = USBDHDR(in_feature_unit_desc);
+
+		headers[i++] = USBDHDR(&usb_in_ot_desc);
+	}
+
+	if (EPOUT_EN(opts))
+		headers[i++] = USBDHDR(&io_out_ot_desc);
+
+	if (FUOUT_EN(opts) || FUIN_EN(opts)) {
+		headers[i++] = USBDHDR(ep_int_desc);
+		if (ep_int_desc_comp)
+			headers[i++] = USBDHDR(ep_int_desc_comp);
+	}
+
+	if (EPOUT_EN(opts)) {
+		headers[i++] = USBDHDR(&std_as_out_if0_desc);
+		headers[i++] = USBDHDR(&std_as_out_if1_desc);
+		headers[i++] = USBDHDR(&as_out_hdr_desc);
+		headers[i++] = USBDHDR(&as_out_fmt1_desc);
+		headers[i++] = USBDHDR(epout_desc);
+		if (epout_desc_comp)
+			headers[i++] = USBDHDR(epout_desc_comp);
+
+		headers[i++] = USBDHDR(&as_iso_out_desc);
+
+		if (EPOUT_FBACK_IN_EN(opts)) {
+			headers[i++] = USBDHDR(epin_fback_desc);
+			if (epin_fback_desc_comp)
+				headers[i++] = USBDHDR(epin_fback_desc_comp);
+		}
+	}
+
+	if (EPIN_EN(opts)) {
+		headers[i++] = USBDHDR(&std_as_in_if0_desc);
+		headers[i++] = USBDHDR(&std_as_in_if1_desc);
+		headers[i++] = USBDHDR(&as_in_hdr_desc);
+		headers[i++] = USBDHDR(&as_in_fmt1_desc);
+		headers[i++] = USBDHDR(epin_desc);
+		if (epin_desc_comp)
+			headers[i++] = USBDHDR(epin_desc_comp);
+
+		headers[i++] = USBDHDR(&as_iso_in_desc);
+	}
+	headers[i] = NULL;
+}
+
+static void setup_descriptor(struct f_uac2_opts *opts)
+{
+	/* patch descriptors */
+	int i = 1; /* ID's start with 1 */
+
+	if (EPOUT_EN(opts))
+		usb_out_it_desc.bTerminalID = i++;
+	if (EPIN_EN(opts))
+		io_in_it_desc.bTerminalID = i++;
+	if (EPOUT_EN(opts))
+		io_out_ot_desc.bTerminalID = i++;
+	if (EPIN_EN(opts))
+		usb_in_ot_desc.bTerminalID = i++;
+	if (FUOUT_EN(opts))
+		out_feature_unit_desc->bUnitID = i++;
+	if (FUIN_EN(opts))
+		in_feature_unit_desc->bUnitID = i++;
+	if (EPOUT_EN(opts))
+		out_clk_src_desc.bClockID = i++;
+	if (EPIN_EN(opts))
+		in_clk_src_desc.bClockID = i++;
+
+	usb_out_it_desc.bCSourceID = out_clk_src_desc.bClockID;
+
+	if (FUIN_EN(opts)) {
+		usb_in_ot_desc.bSourceID = in_feature_unit_desc->bUnitID;
+		in_feature_unit_desc->bSourceID = io_in_it_desc.bTerminalID;
+	} else {
+		usb_in_ot_desc.bSourceID = io_in_it_desc.bTerminalID;
+	}
+
+	usb_in_ot_desc.bCSourceID = in_clk_src_desc.bClockID;
+	io_in_it_desc.bCSourceID = in_clk_src_desc.bClockID;
+	io_out_ot_desc.bCSourceID = out_clk_src_desc.bClockID;
+
+	if (FUOUT_EN(opts)) {
+		io_out_ot_desc.bSourceID = out_feature_unit_desc->bUnitID;
+		out_feature_unit_desc->bSourceID = usb_out_it_desc.bTerminalID;
+	} else {
+		io_out_ot_desc.bSourceID = usb_out_it_desc.bTerminalID;
+	}
+
+	as_out_hdr_desc.bTerminalLink = usb_out_it_desc.bTerminalID;
+	as_in_hdr_desc.bTerminalLink = usb_in_ot_desc.bTerminalID;
+
+	iad_desc.bInterfaceCount = 1;
+	ac_hdr_desc.wTotalLength = cpu_to_le16(sizeof(ac_hdr_desc));
+
+	if (EPIN_EN(opts)) {
+		u16 len = le16_to_cpu(ac_hdr_desc.wTotalLength);
+
+		len += sizeof(in_clk_src_desc);
+		len += sizeof(usb_in_ot_desc);
+
+		if (FUIN_EN(opts))
+			len += in_feature_unit_desc->bLength;
+
+		len += sizeof(io_in_it_desc);
+		ac_hdr_desc.wTotalLength = cpu_to_le16(len);
+		iad_desc.bInterfaceCount++;
+	}
+	if (EPOUT_EN(opts)) {
+		u16 len = le16_to_cpu(ac_hdr_desc.wTotalLength);
+
+		len += sizeof(out_clk_src_desc);
+		len += sizeof(usb_out_it_desc);
+
+		if (FUOUT_EN(opts))
+			len += out_feature_unit_desc->bLength;
+
+		len += sizeof(io_out_ot_desc);
+		ac_hdr_desc.wTotalLength = cpu_to_le16(len);
+		iad_desc.bInterfaceCount++;
+	}
+
+	setup_headers(opts, fs_audio_desc, USB_SPEED_FULL);
+	setup_headers(opts, hs_audio_desc, USB_SPEED_HIGH);
+	setup_headers(opts, ss_audio_desc, USB_SPEED_SUPER);
+}
+
+static int afunc_validate_opts(struct g_audio *agdev, struct device *dev)
+{
+	struct f_uac2_opts *opts = g_audio_to_uac2_opts(agdev);
+	const char *msg = NULL;
+
+	if (!opts->p_chmask && !opts->c_chmask)
+		msg = "no playback and capture channels";
+	else if (opts->p_chmask & ~UAC2_CHANNEL_MASK)
+		msg = "unsupported playback channels mask";
+	else if (opts->c_chmask & ~UAC2_CHANNEL_MASK)
+		msg = "unsupported capture channels mask";
+	else if ((opts->p_ssize < 1) || (opts->p_ssize > 4))
+		msg = "incorrect playback sample size";
+	else if ((opts->c_ssize < 1) || (opts->c_ssize > 4))
+		msg = "incorrect capture sample size";
+	else if (!opts->p_srates[0])
+		msg = "incorrect playback sampling rate";
+	else if (!opts->c_srates[0])
+		msg = "incorrect capture sampling rate";
+
+	else if (opts->p_volume_max <= opts->p_volume_min)
+		msg = "incorrect playback volume max/min";
+	else if (opts->c_volume_max <= opts->c_volume_min)
+		msg = "incorrect capture volume max/min";
+	else if (opts->p_volume_res <= 0)
+		msg = "negative/zero playback volume resolution";
+	else if (opts->c_volume_res <= 0)
+		msg = "negative/zero capture volume resolution";
+
+	else if ((opts->p_volume_max - opts->p_volume_min) % opts->p_volume_res)
+		msg = "incorrect playback volume resolution";
+	else if ((opts->c_volume_max - opts->c_volume_min) % opts->c_volume_res)
+		msg = "incorrect capture volume resolution";
+
+	else if ((opts->p_hs_bint < 0) || (opts->p_hs_bint > 4))
+		msg = "incorrect playback HS/SS bInterval (1-4: fixed, 0: auto)";
+	else if ((opts->c_hs_bint < 0) || (opts->c_hs_bint > 4))
+		msg = "incorrect capture HS/SS bInterval (1-4: fixed, 0: auto)";
+
+	if (msg) {
+		dev_err(dev, "Error: %s\n", msg);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int
+afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
+{
+	struct f_uac2 *uac2 = func_to_uac2(fn);
+	struct g_audio *agdev = func_to_g_audio(fn);
+	struct usb_composite_dev *cdev = cfg->cdev;
+	struct usb_gadget *gadget = cdev->gadget;
+	struct device *dev = &gadget->dev;
+	struct f_uac2_opts *uac2_opts = g_audio_to_uac2_opts(agdev);
+	struct usb_string *us;
+	int ret;
+
+	ret = afunc_validate_opts(agdev, dev);
+	if (ret)
+		return ret;
+
+	strings_fn[STR_ASSOC].s = uac2_opts->function_name;
+
+	us = usb_gstrings_attach(cdev, fn_strings, ARRAY_SIZE(strings_fn));
+	if (IS_ERR(us))
+		return PTR_ERR(us);
+
+	if (FUOUT_EN(uac2_opts)) {
+		out_feature_unit_desc = build_fu_desc(uac2_opts->c_chmask);
+		if (!out_feature_unit_desc)
+			return -ENOMEM;
+	}
+	if (FUIN_EN(uac2_opts)) {
+		in_feature_unit_desc = build_fu_desc(uac2_opts->p_chmask);
+		if (!in_feature_unit_desc) {
+			ret = -ENOMEM;
+			goto err_free_fu;
+		}
+	}
+
+	iad_desc.iFunction = us[STR_ASSOC].id;
+	std_ac_if_desc.iInterface = us[STR_IF_CTRL].id;
+	in_clk_src_desc.iClockSource = us[STR_CLKSRC_IN].id;
+	out_clk_src_desc.iClockSource = us[STR_CLKSRC_OUT].id;
+	usb_out_it_desc.iTerminal = us[STR_USB_IT].id;
+	io_in_it_desc.iTerminal = us[STR_IO_IT].id;
+	usb_in_ot_desc.iTerminal = us[STR_USB_OT].id;
+	io_out_ot_desc.iTerminal = us[STR_IO_OT].id;
+	std_as_out_if0_desc.iInterface = us[STR_AS_OUT_ALT0].id;
+	std_as_out_if1_desc.iInterface = us[STR_AS_OUT_ALT1].id;
+	std_as_in_if0_desc.iInterface = us[STR_AS_IN_ALT0].id;
+	std_as_in_if1_desc.iInterface = us[STR_AS_IN_ALT1].id;
+
+	if (FUOUT_EN(uac2_opts)) {
+		u8 *i_feature = (u8 *)out_feature_unit_desc +
+				out_feature_unit_desc->bLength - 1;
+		*i_feature = us[STR_FU_OUT].id;
+	}
+	if (FUIN_EN(uac2_opts)) {
+		u8 *i_feature = (u8 *)in_feature_unit_desc +
+				in_feature_unit_desc->bLength - 1;
+		*i_feature = us[STR_FU_IN].id;
+	}
+
+
+	/* Initialize the configurable parameters */
+	usb_out_it_desc.bNrChannels = num_channels(uac2_opts->c_chmask);
+	usb_out_it_desc.bmChannelConfig = cpu_to_le32(uac2_opts->c_chmask);
+	io_in_it_desc.bNrChannels = num_channels(uac2_opts->p_chmask);
+	io_in_it_desc.bmChannelConfig = cpu_to_le32(uac2_opts->p_chmask);
+	as_out_hdr_desc.bNrChannels = num_channels(uac2_opts->c_chmask);
+	as_out_hdr_desc.bmChannelConfig = cpu_to_le32(uac2_opts->c_chmask);
+	as_in_hdr_desc.bNrChannels = num_channels(uac2_opts->p_chmask);
+	as_in_hdr_desc.bmChannelConfig = cpu_to_le32(uac2_opts->p_chmask);
+	as_out_fmt1_desc.bSubslotSize = uac2_opts->c_ssize;
+	as_out_fmt1_desc.bBitResolution = uac2_opts->c_ssize * 8;
+	as_in_fmt1_desc.bSubslotSize = uac2_opts->p_ssize;
+	as_in_fmt1_desc.bBitResolution = uac2_opts->p_ssize * 8;
+	if (FUOUT_EN(uac2_opts)) {
+		__le32 *bma = (__le32 *)&out_feature_unit_desc->bmaControls[0];
+		u32 control = 0;
+
+		if (uac2_opts->c_mute_present)
+			control |= CONTROL_RDWR << FU_MUTE_CTRL;
+		if (uac2_opts->c_volume_present)
+			control |= CONTROL_RDWR << FU_VOL_CTRL;
+		*bma = cpu_to_le32(control);
+	}
+	if (FUIN_EN(uac2_opts)) {
+		__le32 *bma = (__le32 *)&in_feature_unit_desc->bmaControls[0];
+		u32 control = 0;
+
+		if (uac2_opts->p_mute_present)
+			control |= CONTROL_RDWR << FU_MUTE_CTRL;
+		if (uac2_opts->p_volume_present)
+			control |= CONTROL_RDWR << FU_VOL_CTRL;
+		*bma = cpu_to_le32(control);
+	}
+
+	ret = usb_interface_id(cfg, fn);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		goto err_free_fu;
+	}
+	iad_desc.bFirstInterface = ret;
+
+	std_ac_if_desc.bInterfaceNumber = ret;
+	uac2->ac_intf = ret;
+	uac2->ac_alt = 0;
+
+	if (EPOUT_EN(uac2_opts)) {
+		ret = usb_interface_id(cfg, fn);
+		if (ret < 0) {
+			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+			goto err_free_fu;
+		}
+		std_as_out_if0_desc.bInterfaceNumber = ret;
+		std_as_out_if1_desc.bInterfaceNumber = ret;
+		std_as_out_if1_desc.bNumEndpoints = 1;
+		uac2->as_out_intf = ret;
+		uac2->as_out_alt = 0;
+
+		if (EPOUT_FBACK_IN_EN(uac2_opts)) {
+			fs_epout_desc.bmAttributes =
+			  USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC;
+			hs_epout_desc.bmAttributes =
+			  USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC;
+			ss_epout_desc.bmAttributes =
+			  USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC;
+			std_as_out_if1_desc.bNumEndpoints++;
+		} else {
+			fs_epout_desc.bmAttributes =
+			  USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ADAPTIVE;
+			hs_epout_desc.bmAttributes =
+			  USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ADAPTIVE;
+			ss_epout_desc.bmAttributes =
+			  USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ADAPTIVE;
+		}
+	}
+
+	if (EPIN_EN(uac2_opts)) {
+		ret = usb_interface_id(cfg, fn);
+		if (ret < 0) {
+			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+			goto err_free_fu;
+		}
+		std_as_in_if0_desc.bInterfaceNumber = ret;
+		std_as_in_if1_desc.bInterfaceNumber = ret;
+		uac2->as_in_intf = ret;
+		uac2->as_in_alt = 0;
+	}
+
+	if (FUOUT_EN(uac2_opts) || FUIN_EN(uac2_opts)) {
+		uac2->int_ep = usb_ep_autoconfig(gadget, &fs_ep_int_desc);
+		if (!uac2->int_ep) {
+			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+			ret = -ENODEV;
+			goto err_free_fu;
+		}
+
+		std_ac_if_desc.bNumEndpoints = 1;
+	}
+
+	hs_epin_desc.bInterval = uac2_opts->p_hs_bint;
+	ss_epin_desc.bInterval = uac2_opts->p_hs_bint;
+	hs_epout_desc.bInterval = uac2_opts->c_hs_bint;
+	ss_epout_desc.bInterval = uac2_opts->c_hs_bint;
+
+	/* Calculate wMaxPacketSize according to audio bandwidth */
+	ret = set_ep_max_packet_size_bint(dev, uac2_opts, &fs_epin_desc,
+					USB_SPEED_FULL, true);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size_bint(dev, uac2_opts, &fs_epout_desc,
+					USB_SPEED_FULL, false);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size_bint(dev, uac2_opts, &hs_epin_desc,
+					USB_SPEED_HIGH, true);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size_bint(dev, uac2_opts, &hs_epout_desc,
+					USB_SPEED_HIGH, false);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size_bint(dev, uac2_opts, &ss_epin_desc,
+					USB_SPEED_SUPER, true);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size_bint(dev, uac2_opts, &ss_epout_desc,
+					USB_SPEED_SUPER, false);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	if (EPOUT_EN(uac2_opts)) {
+		agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc);
+		if (!agdev->out_ep) {
+			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+			ret = -ENODEV;
+			goto err_free_fu;
+		}
+		if (EPOUT_FBACK_IN_EN(uac2_opts)) {
+			agdev->in_ep_fback = usb_ep_autoconfig(gadget,
+						       &fs_epin_fback_desc);
+			if (!agdev->in_ep_fback) {
+				dev_err(dev, "%s:%d Error!\n",
+					__func__, __LINE__);
+				ret = -ENODEV;
+				goto err_free_fu;
+			}
+		}
+	}
+
+	if (EPIN_EN(uac2_opts)) {
+		agdev->in_ep = usb_ep_autoconfig(gadget, &fs_epin_desc);
+		if (!agdev->in_ep) {
+			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+			ret = -ENODEV;
+			goto err_free_fu;
+		}
+	}
+
+	agdev->in_ep_maxpsize = max_t(u16,
+				le16_to_cpu(fs_epin_desc.wMaxPacketSize),
+				le16_to_cpu(hs_epin_desc.wMaxPacketSize));
+	agdev->out_ep_maxpsize = max_t(u16,
+				le16_to_cpu(fs_epout_desc.wMaxPacketSize),
+				le16_to_cpu(hs_epout_desc.wMaxPacketSize));
+
+	agdev->in_ep_maxpsize = max_t(u16, agdev->in_ep_maxpsize,
+				le16_to_cpu(ss_epin_desc.wMaxPacketSize));
+	agdev->out_ep_maxpsize = max_t(u16, agdev->out_ep_maxpsize,
+				le16_to_cpu(ss_epout_desc.wMaxPacketSize));
+
+	ss_epin_desc_comp.wBytesPerInterval = ss_epin_desc.wMaxPacketSize;
+	ss_epout_desc_comp.wBytesPerInterval = ss_epout_desc.wMaxPacketSize;
+
+	// HS and SS endpoint addresses are copied from autoconfigured FS descriptors
+	hs_ep_int_desc.bEndpointAddress = fs_ep_int_desc.bEndpointAddress;
+	hs_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress;
+	hs_epin_fback_desc.bEndpointAddress = fs_epin_fback_desc.bEndpointAddress;
+	hs_epin_desc.bEndpointAddress = fs_epin_desc.bEndpointAddress;
+	ss_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress;
+	ss_epin_fback_desc.bEndpointAddress = fs_epin_fback_desc.bEndpointAddress;
+	ss_epin_desc.bEndpointAddress = fs_epin_desc.bEndpointAddress;
+	ss_ep_int_desc.bEndpointAddress = fs_ep_int_desc.bEndpointAddress;
+
+	setup_descriptor(uac2_opts);
+
+	ret = usb_assign_descriptors(fn, fs_audio_desc, hs_audio_desc, ss_audio_desc,
+				     ss_audio_desc);
+	if (ret)
+		goto err_free_fu;
+
+	agdev->gadget = gadget;
+
+	agdev->params.p_chmask = uac2_opts->p_chmask;
+	memcpy(agdev->params.p_srates, uac2_opts->p_srates,
+			sizeof(agdev->params.p_srates));
+	agdev->params.p_ssize = uac2_opts->p_ssize;
+	if (FUIN_EN(uac2_opts)) {
+		agdev->params.p_fu.id = USB_IN_FU_ID;
+		agdev->params.p_fu.mute_present = uac2_opts->p_mute_present;
+		agdev->params.p_fu.volume_present = uac2_opts->p_volume_present;
+		agdev->params.p_fu.volume_min = uac2_opts->p_volume_min;
+		agdev->params.p_fu.volume_max = uac2_opts->p_volume_max;
+		agdev->params.p_fu.volume_res = uac2_opts->p_volume_res;
+	}
+	agdev->params.c_chmask = uac2_opts->c_chmask;
+	memcpy(agdev->params.c_srates, uac2_opts->c_srates,
+			sizeof(agdev->params.c_srates));
+	agdev->params.c_ssize = uac2_opts->c_ssize;
+	if (FUOUT_EN(uac2_opts)) {
+		agdev->params.c_fu.id = USB_OUT_FU_ID;
+		agdev->params.c_fu.mute_present = uac2_opts->c_mute_present;
+		agdev->params.c_fu.volume_present = uac2_opts->c_volume_present;
+		agdev->params.c_fu.volume_min = uac2_opts->c_volume_min;
+		agdev->params.c_fu.volume_max = uac2_opts->c_volume_max;
+		agdev->params.c_fu.volume_res = uac2_opts->c_volume_res;
+	}
+	agdev->params.req_number = uac2_opts->req_number;
+	agdev->params.fb_max = uac2_opts->fb_max;
+
+	if (FUOUT_EN(uac2_opts) || FUIN_EN(uac2_opts))
+    agdev->notify = afunc_notify;
+
+	ret = g_audio_setup(agdev, "UAC2 PCM", "UAC2_Gadget");
+	if (ret)
+		goto err_free_descs;
+
+	return 0;
+
+err_free_descs:
+	usb_free_all_descriptors(fn);
+	agdev->gadget = NULL;
+err_free_fu:
+	kfree(out_feature_unit_desc);
+	out_feature_unit_desc = NULL;
+	kfree(in_feature_unit_desc);
+	in_feature_unit_desc = NULL;
+	return ret;
+}
+
+static void
+afunc_notify_complete(struct usb_ep *_ep, struct usb_request *req)
+{
+	struct g_audio *agdev = req->context;
+	struct f_uac2 *uac2 = func_to_uac2(&agdev->func);
+
+	atomic_dec(&uac2->int_count);
+	kfree(req->buf);
+	usb_ep_free_request(_ep, req);
+}
+
+static int
+afunc_notify(struct g_audio *agdev, int unit_id, int cs)
+{
+	struct f_uac2 *uac2 = func_to_uac2(&agdev->func);
+	struct usb_request *req;
+	struct uac2_interrupt_data_msg *msg;
+	u16 w_index, w_value;
+	int ret;
+
+	if (!uac2->int_ep->enabled)
+		return 0;
+
+	if (atomic_inc_return(&uac2->int_count) > UAC2_DEF_INT_REQ_NUM) {
+		atomic_dec(&uac2->int_count);
+		return 0;
+	}
+
+	req = usb_ep_alloc_request(uac2->int_ep, GFP_ATOMIC);
+	if (req == NULL) {
+		ret = -ENOMEM;
+		goto err_dec_int_count;
+	}
+
+	msg = kzalloc(sizeof(*msg), GFP_ATOMIC);
+	if (msg == NULL) {
+		ret = -ENOMEM;
+		goto err_free_request;
+	}
+
+	w_index = unit_id << 8 | uac2->ac_intf;
+	w_value = cs << 8;
+
+	msg->bInfo = 0; /* Non-vendor, interface interrupt */
+	msg->bAttribute = UAC2_CS_CUR;
+	msg->wIndex = cpu_to_le16(w_index);
+	msg->wValue = cpu_to_le16(w_value);
+
+	req->length = sizeof(*msg);
+	req->buf = msg;
+	req->context = agdev;
+	req->complete = afunc_notify_complete;
+
+	ret = usb_ep_queue(uac2->int_ep, req, GFP_ATOMIC);
+
+	if (ret)
+		goto err_free_msg;
+
+	return 0;
+
+err_free_msg:
+	kfree(msg);
+err_free_request:
+	usb_ep_free_request(uac2->int_ep, req);
+err_dec_int_count:
+	atomic_dec(&uac2->int_count);
+
+	return ret;
+}
+
+static int
+afunc_set_alt(struct usb_function *fn, unsigned intf, unsigned alt)
+{
+	struct usb_composite_dev *cdev = fn->config->cdev;
+	struct f_uac2 *uac2 = func_to_uac2(fn);
+	struct g_audio *agdev = func_to_g_audio(fn);
+	struct usb_gadget *gadget = cdev->gadget;
+	struct device *dev = &gadget->dev;
+	int ret = 0;
+
+	/* No i/f has more than 2 alt settings */
+	if (alt > 1) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return -EINVAL;
+	}
+
+	if (intf == uac2->ac_intf) {
+		/* Control I/f has only 1 AltSetting - 0 */
+		if (alt) {
+			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+			return -EINVAL;
+		}
+
+		/* restart interrupt endpoint */
+		if (uac2->int_ep) {
+			usb_ep_disable(uac2->int_ep);
+			config_ep_by_speed(gadget, &agdev->func, uac2->int_ep);
+			usb_ep_enable(uac2->int_ep);
+		}
+
+		return 0;
+	}
+
+	if (intf == uac2->as_out_intf) {
+		uac2->as_out_alt = alt;
+
+		if (alt)
+			ret = u_audio_start_capture(&uac2->g_audio);
+		else
+			u_audio_stop_capture(&uac2->g_audio);
+	} else if (intf == uac2->as_in_intf) {
+		uac2->as_in_alt = alt;
+
+		if (alt)
+			ret = u_audio_start_playback(&uac2->g_audio);
+		else
+			u_audio_stop_playback(&uac2->g_audio);
+	} else {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int
+afunc_get_alt(struct usb_function *fn, unsigned intf)
+{
+	struct f_uac2 *uac2 = func_to_uac2(fn);
+	struct g_audio *agdev = func_to_g_audio(fn);
+
+	if (intf == uac2->ac_intf)
+		return uac2->ac_alt;
+	else if (intf == uac2->as_out_intf)
+		return uac2->as_out_alt;
+	else if (intf == uac2->as_in_intf)
+		return uac2->as_in_alt;
+	else
+		dev_err(&agdev->gadget->dev,
+			"%s:%d Invalid Interface %d!\n",
+			__func__, __LINE__, intf);
+
+	return -EINVAL;
+}
+
+static void
+afunc_disable(struct usb_function *fn)
+{
+	struct f_uac2 *uac2 = func_to_uac2(fn);
+
+	uac2->as_in_alt = 0;
+	uac2->as_out_alt = 0;
+	u_audio_stop_capture(&uac2->g_audio);
+	u_audio_stop_playback(&uac2->g_audio);
+	if (uac2->int_ep)
+		usb_ep_disable(uac2->int_ep);
+}
+
+static void
+afunc_suspend(struct usb_function *fn)
+{
+	struct f_uac2 *uac2 = func_to_uac2(fn);
+
+	u_audio_suspend(&uac2->g_audio);
+}
+
+static int
+in_rq_cur(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+	struct usb_request *req = fn->config->cdev->req;
+	struct g_audio *agdev = func_to_g_audio(fn);
+	struct f_uac2_opts *opts = g_audio_to_uac2_opts(agdev);
+	u16 w_length = le16_to_cpu(cr->wLength);
+	u16 w_index = le16_to_cpu(cr->wIndex);
+	u16 w_value = le16_to_cpu(cr->wValue);
+	u8 entity_id = (w_index >> 8) & 0xff;
+	u8 control_selector = w_value >> 8;
+	int value = -EOPNOTSUPP;
+	u32 p_srate, c_srate;
+
+	u_audio_get_playback_srate(agdev, &p_srate);
+	u_audio_get_capture_srate(agdev, &c_srate);
+
+	if ((entity_id == USB_IN_CLK_ID) || (entity_id == USB_OUT_CLK_ID)) {
+		if (control_selector == UAC2_CS_CONTROL_SAM_FREQ) {
+			struct cntrl_cur_lay3 c;
+
+			memset(&c, 0, sizeof(struct cntrl_cur_lay3));
+
+			if (entity_id == USB_IN_CLK_ID)
+				c.dCUR = cpu_to_le32(p_srate);
+			else if (entity_id == USB_OUT_CLK_ID)
+				c.dCUR = cpu_to_le32(c_srate);
+
+			value = min_t(unsigned int, w_length, sizeof(c));
+			memcpy(req->buf, &c, value);
+		} else if (control_selector == UAC2_CS_CONTROL_CLOCK_VALID) {
+			*(u8 *)req->buf = 1;
+			value = min_t(unsigned int, w_length, 1);
+		} else {
+			dev_err(&agdev->gadget->dev,
+				"%s:%d control_selector=%d TODO!\n",
+				__func__, __LINE__, control_selector);
+		}
+	} else if ((FUIN_EN(opts) && (entity_id == USB_IN_FU_ID)) ||
+			(FUOUT_EN(opts) && (entity_id == USB_OUT_FU_ID))) {
+		unsigned int is_playback = 0;
+
+		if (FUIN_EN(opts) && (entity_id == USB_IN_FU_ID))
+			is_playback = 1;
+
+		if (control_selector == UAC_FU_MUTE) {
+			unsigned int mute;
+
+			u_audio_get_mute(agdev, is_playback, &mute);
+
+			*(u8 *)req->buf = mute;
+			value = min_t(unsigned int, w_length, 1);
+		} else if (control_selector == UAC_FU_VOLUME) {
+			struct cntrl_cur_lay2 c;
+			s16 volume;
+
+			memset(&c, 0, sizeof(struct cntrl_cur_lay2));
+
+			u_audio_get_volume(agdev, is_playback, &volume);
+			c.wCUR = cpu_to_le16(volume);
+
+			value = min_t(unsigned int, w_length, sizeof(c));
+			memcpy(req->buf, &c, value);
+		} else {
+			dev_err(&agdev->gadget->dev,
+				"%s:%d control_selector=%d TODO!\n",
+				__func__, __LINE__, control_selector);
+		}
+	} else {
+		dev_err(&agdev->gadget->dev,
+			"%s:%d entity_id=%d control_selector=%d TODO!\n",
+			__func__, __LINE__, entity_id, control_selector);
+	}
+
+	return value;
+}
+
+static int
+in_rq_range(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+	struct usb_request *req = fn->config->cdev->req;
+	struct g_audio *agdev = func_to_g_audio(fn);
+	struct f_uac2_opts *opts = g_audio_to_uac2_opts(agdev);
+	u16 w_length = le16_to_cpu(cr->wLength);
+	u16 w_index = le16_to_cpu(cr->wIndex);
+	u16 w_value = le16_to_cpu(cr->wValue);
+	u8 entity_id = (w_index >> 8) & 0xff;
+	u8 control_selector = w_value >> 8;
+	int value = -EOPNOTSUPP;
+
+	if ((entity_id == USB_IN_CLK_ID) || (entity_id == USB_OUT_CLK_ID)) {
+		if (control_selector == UAC2_CS_CONTROL_SAM_FREQ) {
+			struct cntrl_ranges_lay3_srates rs;
+			int i;
+			int wNumSubRanges = 0;
+			int srate;
+			int *srates;
+
+			if (entity_id == USB_IN_CLK_ID)
+				srates = opts->p_srates;
+			else if (entity_id == USB_OUT_CLK_ID)
+				srates = opts->c_srates;
+			else
+				return -EOPNOTSUPP;
+			for (i = 0; i < UAC_MAX_RATES; i++) {
+				srate = srates[i];
+				if (srate == 0)
+					break;
+
+				rs.r[wNumSubRanges].dMIN = cpu_to_le32(srate);
+				rs.r[wNumSubRanges].dMAX = cpu_to_le32(srate);
+				rs.r[wNumSubRanges].dRES = 0;
+				wNumSubRanges++;
+				dev_dbg(&agdev->gadget->dev,
+					"%s(): clk %d: rate ID %d: %d\n",
+					__func__, entity_id, wNumSubRanges, srate);
+			}
+			rs.wNumSubRanges = cpu_to_le16(wNumSubRanges);
+			value = min_t(unsigned int, w_length, ranges_lay3_size(rs));
+			dev_dbg(&agdev->gadget->dev, "%s(): sending %d rates, size %d\n",
+				__func__, rs.wNumSubRanges, value);
+			memcpy(req->buf, &rs, value);
+		} else {
+			dev_err(&agdev->gadget->dev,
+				"%s:%d control_selector=%d TODO!\n",
+				__func__, __LINE__, control_selector);
+		}
+	} else if ((FUIN_EN(opts) && (entity_id == USB_IN_FU_ID)) ||
+			(FUOUT_EN(opts) && (entity_id == USB_OUT_FU_ID))) {
+		unsigned int is_playback = 0;
+
+		if (FUIN_EN(opts) && (entity_id == USB_IN_FU_ID))
+			is_playback = 1;
+
+		if (control_selector == UAC_FU_VOLUME) {
+			struct cntrl_range_lay2 r;
+			s16 max_db, min_db, res_db;
+
+			if (is_playback) {
+				max_db = opts->p_volume_max;
+				min_db = opts->p_volume_min;
+				res_db = opts->p_volume_res;
+			} else {
+				max_db = opts->c_volume_max;
+				min_db = opts->c_volume_min;
+				res_db = opts->c_volume_res;
+			}
+
+			r.wMAX = cpu_to_le16(max_db);
+			r.wMIN = cpu_to_le16(min_db);
+			r.wRES = cpu_to_le16(res_db);
+			r.wNumSubRanges = cpu_to_le16(1);
+
+			value = min_t(unsigned int, w_length, sizeof(r));
+			memcpy(req->buf, &r, value);
+		} else {
+			dev_err(&agdev->gadget->dev,
+				"%s:%d control_selector=%d TODO!\n",
+				__func__, __LINE__, control_selector);
+		}
+	} else {
+		dev_err(&agdev->gadget->dev,
+			"%s:%d entity_id=%d control_selector=%d TODO!\n",
+			__func__, __LINE__, entity_id, control_selector);
+	}
+
+	return value;
+}
+
+static int
+ac_rq_in(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+	if (cr->bRequest == UAC2_CS_CUR)
+		return in_rq_cur(fn, cr);
+	else if (cr->bRequest == UAC2_CS_RANGE)
+		return in_rq_range(fn, cr);
+	else
+		return -EOPNOTSUPP;
+}
+
+static void uac2_cs_control_sam_freq(struct usb_ep *ep, struct usb_request *req)
+{
+	struct usb_function *fn = ep->driver_data;
+	struct g_audio *agdev = func_to_g_audio(fn);
+	struct f_uac2 *uac2 = func_to_uac2(fn);
+	u32 val;
+
+	if (req->actual != 4)
+		return;
+
+	val = le32_to_cpu(*((__le32 *)req->buf));
+	dev_dbg(&agdev->gadget->dev, "%s val: %d.\n", __func__, val);
+	if (uac2->clock_id == USB_IN_CLK_ID) {
+		u_audio_set_playback_srate(agdev, val);
+	} else if (uac2->clock_id == USB_OUT_CLK_ID) {
+		u_audio_set_capture_srate(agdev, val);
+	}
+}
+
+static void
+out_rq_cur_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct g_audio *agdev = req->context;
+	struct usb_composite_dev *cdev = agdev->func.config->cdev;
+	struct f_uac2_opts *opts = g_audio_to_uac2_opts(agdev);
+	struct f_uac2 *uac2 = func_to_uac2(&agdev->func);
+	struct usb_ctrlrequest *cr = &uac2->setup_cr;
+	u16 w_index = le16_to_cpu(cr->wIndex);
+	u16 w_value = le16_to_cpu(cr->wValue);
+	u8 entity_id = (w_index >> 8) & 0xff;
+	u8 control_selector = w_value >> 8;
+
+	if (req->status != 0) {
+		dev_dbg(&cdev->gadget->dev, "completion err %d\n", req->status);
+		return;
+	}
+
+	if ((FUIN_EN(opts) && (entity_id == USB_IN_FU_ID)) ||
+		(FUOUT_EN(opts) && (entity_id == USB_OUT_FU_ID))) {
+		unsigned int is_playback = 0;
+
+		if (FUIN_EN(opts) && (entity_id == USB_IN_FU_ID))
+			is_playback = 1;
+
+		if (control_selector == UAC_FU_MUTE) {
+			u8 mute = *(u8 *)req->buf;
+
+			u_audio_set_mute(agdev, is_playback, mute);
+
+			return;
+		} else if (control_selector == UAC_FU_VOLUME) {
+			struct cntrl_cur_lay2 *c = req->buf;
+			s16 volume;
+
+			volume = le16_to_cpu(c->wCUR);
+			u_audio_set_volume(agdev, is_playback, volume);
+
+			return;
+		} else {
+			dev_err(&agdev->gadget->dev,
+				"%s:%d control_selector=%d TODO!\n",
+				__func__, __LINE__, control_selector);
+			usb_ep_set_halt(ep);
+		}
+	}
+}
+
+static int
+out_rq_cur(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+	struct usb_composite_dev *cdev = fn->config->cdev;
+	struct usb_request *req = fn->config->cdev->req;
+	struct g_audio *agdev = func_to_g_audio(fn);
+	struct f_uac2_opts *opts = g_audio_to_uac2_opts(agdev);
+	struct f_uac2 *uac2 = func_to_uac2(fn);
+	u16 w_length = le16_to_cpu(cr->wLength);
+	u16 w_index = le16_to_cpu(cr->wIndex);
+	u16 w_value = le16_to_cpu(cr->wValue);
+	u8 entity_id = (w_index >> 8) & 0xff;
+	u8 control_selector = w_value >> 8;
+	u8 clock_id = w_index >> 8;
+
+	if ((entity_id == USB_IN_CLK_ID) || (entity_id == USB_OUT_CLK_ID)) {
+		if (control_selector == UAC2_CS_CONTROL_SAM_FREQ) {
+			dev_dbg(&agdev->gadget->dev,
+				"control_selector UAC2_CS_CONTROL_SAM_FREQ, clock: %d\n", clock_id);
+			cdev->gadget->ep0->driver_data = fn;
+			uac2->clock_id = clock_id;
+			req->complete = uac2_cs_control_sam_freq;
+			return w_length;
+		}
+	} else if ((FUIN_EN(opts) && (entity_id == USB_IN_FU_ID)) ||
+			(FUOUT_EN(opts) && (entity_id == USB_OUT_FU_ID))) {
+		memcpy(&uac2->setup_cr, cr, sizeof(*cr));
+		req->context = agdev;
+		req->complete = out_rq_cur_complete;
+
+		return w_length;
+	} else {
+		dev_err(&agdev->gadget->dev,
+			"%s:%d entity_id=%d control_selector=%d TODO!\n",
+			__func__, __LINE__, entity_id, control_selector);
+	}
+	return -EOPNOTSUPP;
+}
+
+static int
+setup_rq_inf(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+	struct f_uac2 *uac2 = func_to_uac2(fn);
+	struct g_audio *agdev = func_to_g_audio(fn);
+	u16 w_index = le16_to_cpu(cr->wIndex);
+	u8 intf = w_index & 0xff;
+
+	if (intf != uac2->ac_intf) {
+		dev_err(&agdev->gadget->dev,
+			"%s:%d Error!\n", __func__, __LINE__);
+		return -EOPNOTSUPP;
+	}
+
+	if (cr->bRequestType & USB_DIR_IN)
+		return ac_rq_in(fn, cr);
+	else if (cr->bRequest == UAC2_CS_CUR)
+		return out_rq_cur(fn, cr);
+
+	return -EOPNOTSUPP;
+}
+
+static int
+afunc_setup(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+	struct usb_composite_dev *cdev = fn->config->cdev;
+	struct g_audio *agdev = func_to_g_audio(fn);
+	struct usb_request *req = cdev->req;
+	u16 w_length = le16_to_cpu(cr->wLength);
+	int value = -EOPNOTSUPP;
+
+	/* Only Class specific requests are supposed to reach here */
+	if ((cr->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS)
+		return -EOPNOTSUPP;
+
+	if ((cr->bRequestType & USB_RECIP_MASK) == USB_RECIP_INTERFACE)
+		value = setup_rq_inf(fn, cr);
+	else
+		dev_err(&agdev->gadget->dev, "%s:%d Error!\n",
+				__func__, __LINE__);
+
+	if (value >= 0) {
+		req->length = value;
+		req->zero = value < w_length;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0) {
+			dev_err(&agdev->gadget->dev,
+				"%s:%d Error!\n", __func__, __LINE__);
+			req->status = 0;
+		}
+	}
+
+	return value;
+}
+
+static inline struct f_uac2_opts *to_f_uac2_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_uac2_opts,
+			    func_inst.group);
+}
+
+static void f_uac2_attr_release(struct config_item *item)
+{
+	struct f_uac2_opts *opts = to_f_uac2_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations f_uac2_item_ops = {
+	.release	= f_uac2_attr_release,
+};
+
+#define uac2_kstrtou8 kstrtou8
+#define uac2_kstrtou32 kstrtou32
+#define uac2_kstrtos16 kstrtos16
+#define uac2_kstrtobool(s, base, res) kstrtobool((s), (res))
+
+static const char *u8_fmt = "%u\n";
+static const char *u32_fmt = "%u\n";
+static const char *s16_fmt = "%hd\n";
+static const char *bool_fmt = "%u\n";
+
+#define UAC2_ATTRIBUTE(type, name)					\
+static ssize_t f_uac2_opts_##name##_show(struct config_item *item,	\
+					 char *page)			\
+{									\
+	struct f_uac2_opts *opts = to_f_uac2_opts(item);		\
+	int result;							\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, type##_fmt, opts->name);			\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t f_uac2_opts_##name##_store(struct config_item *item,	\
+					  const char *page, size_t len)	\
+{									\
+	struct f_uac2_opts *opts = to_f_uac2_opts(item);		\
+	int ret;							\
+	type num;							\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt) {						\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	ret = uac2_kstrto##type(page, 0, &num);				\
+	if (ret)							\
+		goto end;						\
+									\
+	opts->name = num;						\
+	ret = len;							\
+									\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+CONFIGFS_ATTR(f_uac2_opts_, name)
+
+#define UAC2_ATTRIBUTE_SYNC(name)					\
+static ssize_t f_uac2_opts_##name##_show(struct config_item *item,	\
+					 char *page)			\
+{									\
+	struct f_uac2_opts *opts = to_f_uac2_opts(item);		\
+	int result;							\
+	char *str;							\
+									\
+	mutex_lock(&opts->lock);					\
+	switch (opts->name) {						\
+	case USB_ENDPOINT_SYNC_ASYNC:					\
+		str = "async";						\
+		break;							\
+	case USB_ENDPOINT_SYNC_ADAPTIVE:				\
+		str = "adaptive";					\
+		break;							\
+	default:							\
+		str = "unknown";					\
+		break;							\
+	}								\
+	result = sprintf(page, "%s\n", str);				\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t f_uac2_opts_##name##_store(struct config_item *item,	\
+					  const char *page, size_t len)	\
+{									\
+	struct f_uac2_opts *opts = to_f_uac2_opts(item);		\
+	int ret = 0;							\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt) {						\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	if (!strncmp(page, "async", 5))					\
+		opts->name = USB_ENDPOINT_SYNC_ASYNC;			\
+	else if (!strncmp(page, "adaptive", 8))				\
+		opts->name = USB_ENDPOINT_SYNC_ADAPTIVE;		\
+	else {								\
+		ret = -EINVAL;						\
+		goto end;						\
+	}								\
+									\
+	ret = len;							\
+									\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+CONFIGFS_ATTR(f_uac2_opts_, name)
+
+#define UAC2_RATE_ATTRIBUTE(name)					\
+static ssize_t f_uac2_opts_##name##_show(struct config_item *item,	\
+					 char *page)			\
+{									\
+	struct f_uac2_opts *opts = to_f_uac2_opts(item);		\
+	int result = 0;							\
+	int i;								\
+									\
+	mutex_lock(&opts->lock);					\
+	page[0] = '\0';							\
+	for (i = 0; i < UAC_MAX_RATES; i++) {				\
+		if (opts->name##s[i] == 0)				\
+			break;						\
+		result += sprintf(page + strlen(page), "%u,",		\
+				opts->name##s[i]);			\
+	}								\
+	if (strlen(page) > 0)						\
+		page[strlen(page) - 1] = '\n';				\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t f_uac2_opts_##name##_store(struct config_item *item,	\
+					  const char *page, size_t len)	\
+{									\
+	struct f_uac2_opts *opts = to_f_uac2_opts(item);		\
+	char *split_page = NULL;					\
+	int ret = -EINVAL;						\
+	char *token;							\
+	u32 num;							\
+	int i;								\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt) {						\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	i = 0;								\
+	memset(opts->name##s, 0x00, sizeof(opts->name##s));		\
+	split_page = kstrdup(page, GFP_KERNEL);				\
+	while ((token = strsep(&split_page, ",")) != NULL) {		\
+		ret = kstrtou32(token, 0, &num);			\
+		if (ret)						\
+			goto end;					\
+									\
+		opts->name##s[i++] = num;				\
+		ret = len;						\
+	};								\
+									\
+end:									\
+	kfree(split_page);						\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+CONFIGFS_ATTR(f_uac2_opts_, name)
+
+#define UAC2_ATTRIBUTE_STRING(name)					\
+static ssize_t f_uac2_opts_##name##_show(struct config_item *item,	\
+					 char *page)			\
+{									\
+	struct f_uac2_opts *opts = to_f_uac2_opts(item);		\
+	int result;							\
+									\
+	mutex_lock(&opts->lock);					\
+	result = snprintf(page, sizeof(opts->name), "%s", opts->name);	\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t f_uac2_opts_##name##_store(struct config_item *item,	\
+					  const char *page, size_t len)	\
+{									\
+	struct f_uac2_opts *opts = to_f_uac2_opts(item);		\
+	int ret = 0;							\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt) {						\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	ret = snprintf(opts->name, min(sizeof(opts->name), len),	\
+			"%s", page);					\
+									\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+CONFIGFS_ATTR(f_uac2_opts_, name)
+
+UAC2_ATTRIBUTE(u32, p_chmask);
+UAC2_RATE_ATTRIBUTE(p_srate);
+UAC2_ATTRIBUTE(u32, p_ssize);
+UAC2_ATTRIBUTE(u8, p_hs_bint);
+UAC2_ATTRIBUTE(u32, c_chmask);
+UAC2_RATE_ATTRIBUTE(c_srate);
+UAC2_ATTRIBUTE_SYNC(c_sync);
+UAC2_ATTRIBUTE(u32, c_ssize);
+UAC2_ATTRIBUTE(u8, c_hs_bint);
+UAC2_ATTRIBUTE(u32, req_number);
+
+UAC2_ATTRIBUTE(bool, p_mute_present);
+UAC2_ATTRIBUTE(bool, p_volume_present);
+UAC2_ATTRIBUTE(s16, p_volume_min);
+UAC2_ATTRIBUTE(s16, p_volume_max);
+UAC2_ATTRIBUTE(s16, p_volume_res);
+
+UAC2_ATTRIBUTE(bool, c_mute_present);
+UAC2_ATTRIBUTE(bool, c_volume_present);
+UAC2_ATTRIBUTE(s16, c_volume_min);
+UAC2_ATTRIBUTE(s16, c_volume_max);
+UAC2_ATTRIBUTE(s16, c_volume_res);
+UAC2_ATTRIBUTE(u32, fb_max);
+UAC2_ATTRIBUTE_STRING(function_name);
+
+static struct configfs_attribute *f_uac2_attrs[] = {
+	&f_uac2_opts_attr_p_chmask,
+	&f_uac2_opts_attr_p_srate,
+	&f_uac2_opts_attr_p_ssize,
+	&f_uac2_opts_attr_p_hs_bint,
+	&f_uac2_opts_attr_c_chmask,
+	&f_uac2_opts_attr_c_srate,
+	&f_uac2_opts_attr_c_ssize,
+	&f_uac2_opts_attr_c_hs_bint,
+	&f_uac2_opts_attr_c_sync,
+	&f_uac2_opts_attr_req_number,
+	&f_uac2_opts_attr_fb_max,
+
+	&f_uac2_opts_attr_p_mute_present,
+	&f_uac2_opts_attr_p_volume_present,
+	&f_uac2_opts_attr_p_volume_min,
+	&f_uac2_opts_attr_p_volume_max,
+	&f_uac2_opts_attr_p_volume_res,
+
+	&f_uac2_opts_attr_c_mute_present,
+	&f_uac2_opts_attr_c_volume_present,
+	&f_uac2_opts_attr_c_volume_min,
+	&f_uac2_opts_attr_c_volume_max,
+	&f_uac2_opts_attr_c_volume_res,
+
+	&f_uac2_opts_attr_function_name,
+
+	NULL,
+};
+
+static const struct config_item_type f_uac2_func_type = {
+	.ct_item_ops	= &f_uac2_item_ops,
+	.ct_attrs	= f_uac2_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void afunc_free_inst(struct usb_function_instance *f)
+{
+	struct f_uac2_opts *opts;
+
+	opts = container_of(f, struct f_uac2_opts, func_inst);
+	kfree(opts);
+}
+
+static struct usb_function_instance *afunc_alloc_inst(void)
+{
+	struct f_uac2_opts *opts;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&opts->lock);
+	opts->func_inst.free_func_inst = afunc_free_inst;
+
+	config_group_init_type_name(&opts->func_inst.group, "",
+				    &f_uac2_func_type);
+
+	opts->p_chmask = UAC2_DEF_PCHMASK;
+	opts->p_srates[0] = UAC2_DEF_PSRATE;
+	opts->p_ssize = UAC2_DEF_PSSIZE;
+	opts->p_hs_bint = UAC2_DEF_PHSBINT;
+	opts->c_chmask = UAC2_DEF_CCHMASK;
+	opts->c_srates[0] = UAC2_DEF_CSRATE;
+	opts->c_ssize = UAC2_DEF_CSSIZE;
+	opts->c_hs_bint = UAC2_DEF_CHSBINT;
+	opts->c_sync = UAC2_DEF_CSYNC;
+
+	opts->p_mute_present = UAC2_DEF_MUTE_PRESENT;
+	opts->p_volume_present = UAC2_DEF_VOLUME_PRESENT;
+	opts->p_volume_min = UAC2_DEF_MIN_DB;
+	opts->p_volume_max = UAC2_DEF_MAX_DB;
+	opts->p_volume_res = UAC2_DEF_RES_DB;
+
+	opts->c_mute_present = UAC2_DEF_MUTE_PRESENT;
+	opts->c_volume_present = UAC2_DEF_VOLUME_PRESENT;
+	opts->c_volume_min = UAC2_DEF_MIN_DB;
+	opts->c_volume_max = UAC2_DEF_MAX_DB;
+	opts->c_volume_res = UAC2_DEF_RES_DB;
+
+	opts->req_number = UAC2_DEF_REQ_NUM;
+	opts->fb_max = FBACK_FAST_MAX;
+
+	snprintf(opts->function_name, sizeof(opts->function_name), "Source/Sink");
+
+	return &opts->func_inst;
+}
+
+static void afunc_free(struct usb_function *f)
+{
+	struct g_audio *agdev;
+	struct f_uac2_opts *opts;
+
+	agdev = func_to_g_audio(f);
+	opts = container_of(f->fi, struct f_uac2_opts, func_inst);
+	kfree(agdev);
+	mutex_lock(&opts->lock);
+	--opts->refcnt;
+	mutex_unlock(&opts->lock);
+}
+
+static void afunc_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct g_audio *agdev = func_to_g_audio(f);
+
+	g_audio_cleanup(agdev);
+	usb_free_all_descriptors(f);
+
+	agdev->gadget = NULL;
+
+	kfree(out_feature_unit_desc);
+	out_feature_unit_desc = NULL;
+	kfree(in_feature_unit_desc);
+	in_feature_unit_desc = NULL;
+}
+
+static struct usb_function *afunc_alloc(struct usb_function_instance *fi)
+{
+	struct f_uac2	*uac2;
+	struct f_uac2_opts *opts;
+
+	uac2 = kzalloc(sizeof(*uac2), GFP_KERNEL);
+	if (uac2 == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	opts = container_of(fi, struct f_uac2_opts, func_inst);
+	mutex_lock(&opts->lock);
+	++opts->refcnt;
+	mutex_unlock(&opts->lock);
+
+	uac2->g_audio.func.name = "uac2_func";
+	uac2->g_audio.func.bind = afunc_bind;
+	uac2->g_audio.func.unbind = afunc_unbind;
+	uac2->g_audio.func.set_alt = afunc_set_alt;
+	uac2->g_audio.func.get_alt = afunc_get_alt;
+	uac2->g_audio.func.disable = afunc_disable;
+	uac2->g_audio.func.suspend = afunc_suspend;
+	uac2->g_audio.func.setup = afunc_setup;
+	uac2->g_audio.func.free_func = afunc_free;
+
+	return &uac2->g_audio.func;
+}
+
+DECLARE_USB_FUNCTION_INIT(uac2, afunc_alloc_inst, afunc_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yadwinder Singh");
+MODULE_AUTHOR("Jaswinder Singh");
+MODULE_AUTHOR("Ruslan Bilovol");
diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
new file mode 100644
index 000000000..4419b7972
--- /dev/null
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -0,0 +1,1029 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *	uvc_gadget.c  --  USB Video Class Gadget driver
+ *
+ *	Copyright (C) 2009-2010
+ *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/g_uvc.h>
+#include <linux/usb/video.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+
+#include <media/v4l2-dev.h>
+#include <media/v4l2-event.h>
+
+#include "uvc.h"
+#include "uvc_configfs.h"
+#include "uvc_v4l2.h"
+#include "uvc_video.h"
+
+unsigned int uvc_gadget_trace_param;
+module_param_named(trace, uvc_gadget_trace_param, uint, 0644);
+MODULE_PARM_DESC(trace, "Trace level bitmask");
+
+/* --------------------------------------------------------------------------
+ * Function descriptors
+ */
+
+/* string IDs are assigned dynamically */
+
+#define UVC_STRING_CONTROL_IDX			0
+#define UVC_STRING_STREAMING_IDX		1
+
+static struct usb_string uvc_en_us_strings[] = {
+	/* [UVC_STRING_CONTROL_IDX].s = DYNAMIC, */
+	[UVC_STRING_STREAMING_IDX].s = "Video Streaming",
+	{  }
+};
+
+static struct usb_gadget_strings uvc_stringtab = {
+	.language = 0x0409,	/* en-us */
+	.strings = uvc_en_us_strings,
+};
+
+static struct usb_gadget_strings *uvc_function_strings[] = {
+	&uvc_stringtab,
+	NULL,
+};
+
+#define UVC_INTF_VIDEO_CONTROL			0
+#define UVC_INTF_VIDEO_STREAMING		1
+
+#define UVC_STATUS_MAX_PACKET_SIZE		16	/* 16 bytes status */
+
+static struct usb_interface_assoc_descriptor uvc_iad = {
+	.bLength		= sizeof(uvc_iad),
+	.bDescriptorType	= USB_DT_INTERFACE_ASSOCIATION,
+	.bFirstInterface	= 0,
+	.bInterfaceCount	= 2,
+	.bFunctionClass		= USB_CLASS_VIDEO,
+	.bFunctionSubClass	= UVC_SC_VIDEO_INTERFACE_COLLECTION,
+	.bFunctionProtocol	= 0x00,
+	.iFunction		= 0,
+};
+
+static struct usb_interface_descriptor uvc_control_intf = {
+	.bLength		= USB_DT_INTERFACE_SIZE,
+	.bDescriptorType	= USB_DT_INTERFACE,
+	.bInterfaceNumber	= UVC_INTF_VIDEO_CONTROL,
+	.bAlternateSetting	= 0,
+	.bNumEndpoints		= 1,
+	.bInterfaceClass	= USB_CLASS_VIDEO,
+	.bInterfaceSubClass	= UVC_SC_VIDEOCONTROL,
+	.bInterfaceProtocol	= 0x00,
+	.iInterface		= 0,
+};
+
+static struct usb_endpoint_descriptor uvc_control_ep = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize		= cpu_to_le16(UVC_STATUS_MAX_PACKET_SIZE),
+	.bInterval		= 8,
+};
+
+static struct usb_ss_ep_comp_descriptor uvc_ss_control_comp = {
+	.bLength		= sizeof(uvc_ss_control_comp),
+	.bDescriptorType	= USB_DT_SS_ENDPOINT_COMP,
+	/* The following 3 values can be tweaked if necessary. */
+	.bMaxBurst		= 0,
+	.bmAttributes		= 0,
+	.wBytesPerInterval	= cpu_to_le16(UVC_STATUS_MAX_PACKET_SIZE),
+};
+
+static struct uvc_control_endpoint_descriptor uvc_control_cs_ep = {
+	.bLength		= UVC_DT_CONTROL_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_CS_ENDPOINT,
+	.bDescriptorSubType	= UVC_EP_INTERRUPT,
+	.wMaxTransferSize	= cpu_to_le16(UVC_STATUS_MAX_PACKET_SIZE),
+};
+
+static struct usb_interface_descriptor uvc_streaming_intf_alt0 = {
+	.bLength		= USB_DT_INTERFACE_SIZE,
+	.bDescriptorType	= USB_DT_INTERFACE,
+	.bInterfaceNumber	= UVC_INTF_VIDEO_STREAMING,
+	.bAlternateSetting	= 0,
+	.bNumEndpoints		= 0,
+	.bInterfaceClass	= USB_CLASS_VIDEO,
+	.bInterfaceSubClass	= UVC_SC_VIDEOSTREAMING,
+	.bInterfaceProtocol	= 0x00,
+	.iInterface		= 0,
+};
+
+static struct usb_interface_descriptor uvc_streaming_intf_alt1 = {
+	.bLength		= USB_DT_INTERFACE_SIZE,
+	.bDescriptorType	= USB_DT_INTERFACE,
+	.bInterfaceNumber	= UVC_INTF_VIDEO_STREAMING,
+	.bAlternateSetting	= 1,
+	.bNumEndpoints		= 1,
+	.bInterfaceClass	= USB_CLASS_VIDEO,
+	.bInterfaceSubClass	= UVC_SC_VIDEOSTREAMING,
+	.bInterfaceProtocol	= 0x00,
+	.iInterface		= 0,
+};
+
+static struct usb_endpoint_descriptor uvc_fs_streaming_ep = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_SYNC_ASYNC
+				| USB_ENDPOINT_XFER_ISOC,
+	/*
+	 * The wMaxPacketSize and bInterval values will be initialized from
+	 * module parameters.
+	 */
+};
+
+static struct usb_endpoint_descriptor uvc_hs_streaming_ep = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_SYNC_ASYNC
+				| USB_ENDPOINT_XFER_ISOC,
+	/*
+	 * The wMaxPacketSize and bInterval values will be initialized from
+	 * module parameters.
+	 */
+};
+
+static struct usb_endpoint_descriptor uvc_ss_streaming_ep = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_SYNC_ASYNC
+				| USB_ENDPOINT_XFER_ISOC,
+	/*
+	 * The wMaxPacketSize and bInterval values will be initialized from
+	 * module parameters.
+	 */
+};
+
+static struct usb_ss_ep_comp_descriptor uvc_ss_streaming_comp = {
+	.bLength		= sizeof(uvc_ss_streaming_comp),
+	.bDescriptorType	= USB_DT_SS_ENDPOINT_COMP,
+	/*
+	 * The bMaxBurst, bmAttributes and wBytesPerInterval values will be
+	 * initialized from module parameters.
+	 */
+};
+
+static const struct usb_descriptor_header * const uvc_fs_streaming[] = {
+	(struct usb_descriptor_header *) &uvc_streaming_intf_alt1,
+	(struct usb_descriptor_header *) &uvc_fs_streaming_ep,
+	NULL,
+};
+
+static const struct usb_descriptor_header * const uvc_hs_streaming[] = {
+	(struct usb_descriptor_header *) &uvc_streaming_intf_alt1,
+	(struct usb_descriptor_header *) &uvc_hs_streaming_ep,
+	NULL,
+};
+
+static const struct usb_descriptor_header * const uvc_ss_streaming[] = {
+	(struct usb_descriptor_header *) &uvc_streaming_intf_alt1,
+	(struct usb_descriptor_header *) &uvc_ss_streaming_ep,
+	(struct usb_descriptor_header *) &uvc_ss_streaming_comp,
+	NULL,
+};
+
+/* --------------------------------------------------------------------------
+ * Control requests
+ */
+
+static void
+uvc_function_ep0_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct uvc_device *uvc = req->context;
+	struct v4l2_event v4l2_event;
+	struct uvc_event *uvc_event = (void *)&v4l2_event.u.data;
+
+	if (uvc->event_setup_out) {
+		uvc->event_setup_out = 0;
+
+		memset(&v4l2_event, 0, sizeof(v4l2_event));
+		v4l2_event.type = UVC_EVENT_DATA;
+		uvc_event->data.length = min_t(unsigned int, req->actual,
+			sizeof(uvc_event->data.data));
+		memcpy(&uvc_event->data.data, req->buf, uvc_event->data.length);
+		v4l2_event_queue(&uvc->vdev, &v4l2_event);
+	}
+}
+
+static int
+uvc_function_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+	struct uvc_device *uvc = to_uvc(f);
+	struct v4l2_event v4l2_event;
+	struct uvc_event *uvc_event = (void *)&v4l2_event.u.data;
+
+	if ((ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS) {
+		uvcg_info(f, "invalid request type\n");
+		return -EINVAL;
+	}
+
+	/* Stall too big requests. */
+	if (le16_to_cpu(ctrl->wLength) > UVC_MAX_REQUEST_SIZE)
+		return -EINVAL;
+
+	/*
+	 * Tell the complete callback to generate an event for the next request
+	 * that will be enqueued by UVCIOC_SEND_RESPONSE.
+	 */
+	uvc->event_setup_out = !(ctrl->bRequestType & USB_DIR_IN);
+	uvc->event_length = le16_to_cpu(ctrl->wLength);
+
+	memset(&v4l2_event, 0, sizeof(v4l2_event));
+	v4l2_event.type = UVC_EVENT_SETUP;
+	memcpy(&uvc_event->req, ctrl, sizeof(uvc_event->req));
+	v4l2_event_queue(&uvc->vdev, &v4l2_event);
+
+	return 0;
+}
+
+void uvc_function_setup_continue(struct uvc_device *uvc)
+{
+	struct usb_composite_dev *cdev = uvc->func.config->cdev;
+
+	usb_composite_setup_continue(cdev);
+}
+
+static int
+uvc_function_get_alt(struct usb_function *f, unsigned interface)
+{
+	struct uvc_device *uvc = to_uvc(f);
+
+	uvcg_info(f, "%s(%u)\n", __func__, interface);
+
+	if (interface == uvc->control_intf)
+		return 0;
+	else if (interface != uvc->streaming_intf)
+		return -EINVAL;
+	else
+		return uvc->video.ep->enabled ? 1 : 0;
+}
+
+static int
+uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
+{
+	struct uvc_device *uvc = to_uvc(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct v4l2_event v4l2_event;
+	struct uvc_event *uvc_event = (void *)&v4l2_event.u.data;
+	int ret;
+
+	uvcg_info(f, "%s(%u, %u)\n", __func__, interface, alt);
+
+	if (interface == uvc->control_intf) {
+		if (alt)
+			return -EINVAL;
+
+		uvcg_info(f, "reset UVC Control\n");
+		usb_ep_disable(uvc->control_ep);
+
+		if (!uvc->control_ep->desc)
+			if (config_ep_by_speed(cdev->gadget, f, uvc->control_ep))
+				return -EINVAL;
+
+		usb_ep_enable(uvc->control_ep);
+
+		if (uvc->state == UVC_STATE_DISCONNECTED) {
+			memset(&v4l2_event, 0, sizeof(v4l2_event));
+			v4l2_event.type = UVC_EVENT_CONNECT;
+			uvc_event->speed = cdev->gadget->speed;
+			v4l2_event_queue(&uvc->vdev, &v4l2_event);
+
+			uvc->state = UVC_STATE_CONNECTED;
+		}
+
+		return 0;
+	}
+
+	if (interface != uvc->streaming_intf)
+		return -EINVAL;
+
+	/* TODO
+	if (usb_endpoint_xfer_bulk(&uvc->desc.vs_ep))
+		return alt ? -EINVAL : 0;
+	*/
+
+	switch (alt) {
+	case 0:
+		if (uvc->state != UVC_STATE_STREAMING)
+			return 0;
+
+		if (uvc->video.ep)
+			usb_ep_disable(uvc->video.ep);
+
+		memset(&v4l2_event, 0, sizeof(v4l2_event));
+		v4l2_event.type = UVC_EVENT_STREAMOFF;
+		v4l2_event_queue(&uvc->vdev, &v4l2_event);
+
+		uvc->state = UVC_STATE_CONNECTED;
+		return 0;
+
+	case 1:
+		if (uvc->state != UVC_STATE_CONNECTED)
+			return 0;
+
+		if (!uvc->video.ep)
+			return -EINVAL;
+
+		uvcg_info(f, "reset UVC\n");
+		usb_ep_disable(uvc->video.ep);
+
+		ret = config_ep_by_speed(f->config->cdev->gadget,
+				&(uvc->func), uvc->video.ep);
+		if (ret)
+			return ret;
+		usb_ep_enable(uvc->video.ep);
+
+		memset(&v4l2_event, 0, sizeof(v4l2_event));
+		v4l2_event.type = UVC_EVENT_STREAMON;
+		v4l2_event_queue(&uvc->vdev, &v4l2_event);
+		return USB_GADGET_DELAYED_STATUS;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static void
+uvc_function_disable(struct usb_function *f)
+{
+	struct uvc_device *uvc = to_uvc(f);
+	struct v4l2_event v4l2_event;
+
+	uvcg_info(f, "%s()\n", __func__);
+
+	memset(&v4l2_event, 0, sizeof(v4l2_event));
+	v4l2_event.type = UVC_EVENT_DISCONNECT;
+	v4l2_event_queue(&uvc->vdev, &v4l2_event);
+
+	uvc->state = UVC_STATE_DISCONNECTED;
+
+	usb_ep_disable(uvc->video.ep);
+	usb_ep_disable(uvc->control_ep);
+}
+
+/* --------------------------------------------------------------------------
+ * Connection / disconnection
+ */
+
+void
+uvc_function_connect(struct uvc_device *uvc)
+{
+	int ret;
+
+	if ((ret = usb_function_activate(&uvc->func)) < 0)
+		uvcg_info(&uvc->func, "UVC connect failed with %d\n", ret);
+}
+
+void
+uvc_function_disconnect(struct uvc_device *uvc)
+{
+	int ret;
+
+	if ((ret = usb_function_deactivate(&uvc->func)) < 0)
+		uvcg_info(&uvc->func, "UVC disconnect failed with %d\n", ret);
+}
+
+/* --------------------------------------------------------------------------
+ * USB probe and disconnect
+ */
+
+static ssize_t function_name_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct uvc_device *uvc = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", uvc->func.fi->group.cg_item.ci_name);
+}
+
+static DEVICE_ATTR_RO(function_name);
+
+static int
+uvc_register_video(struct uvc_device *uvc)
+{
+	struct usb_composite_dev *cdev = uvc->func.config->cdev;
+	int ret;
+
+	/* TODO reference counting. */
+	memset(&uvc->vdev, 0, sizeof(uvc->vdev));
+	uvc->vdev.v4l2_dev = &uvc->v4l2_dev;
+	uvc->vdev.v4l2_dev->dev = &cdev->gadget->dev;
+	uvc->vdev.fops = &uvc_v4l2_fops;
+	uvc->vdev.ioctl_ops = &uvc_v4l2_ioctl_ops;
+	uvc->vdev.release = video_device_release_empty;
+	uvc->vdev.vfl_dir = VFL_DIR_TX;
+	uvc->vdev.lock = &uvc->video.mutex;
+	uvc->vdev.device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
+	strscpy(uvc->vdev.name, cdev->gadget->name, sizeof(uvc->vdev.name));
+
+	video_set_drvdata(&uvc->vdev, uvc);
+
+	ret = video_register_device(&uvc->vdev, VFL_TYPE_VIDEO, -1);
+	if (ret < 0)
+		return ret;
+
+	ret = device_create_file(&uvc->vdev.dev, &dev_attr_function_name);
+	if (ret < 0) {
+		video_unregister_device(&uvc->vdev);
+		return ret;
+	}
+
+	return 0;
+}
+
+#define UVC_COPY_DESCRIPTOR(mem, dst, desc) \
+	do { \
+		memcpy(mem, desc, (desc)->bLength); \
+		*(dst)++ = mem; \
+		mem += (desc)->bLength; \
+	} while (0);
+
+#define UVC_COPY_DESCRIPTORS(mem, dst, src) \
+	do { \
+		const struct usb_descriptor_header * const *__src; \
+		for (__src = src; *__src; ++__src) { \
+			memcpy(mem, *__src, (*__src)->bLength); \
+			*dst++ = mem; \
+			mem += (*__src)->bLength; \
+		} \
+	} while (0)
+
+static struct usb_descriptor_header **
+uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
+{
+	struct uvc_input_header_descriptor *uvc_streaming_header;
+	struct uvc_header_descriptor *uvc_control_header;
+	const struct uvc_descriptor_header * const *uvc_control_desc;
+	const struct uvc_descriptor_header * const *uvc_streaming_cls;
+	const struct usb_descriptor_header * const *uvc_streaming_std;
+	const struct usb_descriptor_header * const *src;
+	struct usb_descriptor_header **dst;
+	struct usb_descriptor_header **hdr;
+	unsigned int control_size;
+	unsigned int streaming_size;
+	unsigned int n_desc;
+	unsigned int bytes;
+	void *mem;
+
+	switch (speed) {
+	case USB_SPEED_SUPER:
+		uvc_control_desc = uvc->desc.ss_control;
+		uvc_streaming_cls = uvc->desc.ss_streaming;
+		uvc_streaming_std = uvc_ss_streaming;
+		break;
+
+	case USB_SPEED_HIGH:
+		uvc_control_desc = uvc->desc.fs_control;
+		uvc_streaming_cls = uvc->desc.hs_streaming;
+		uvc_streaming_std = uvc_hs_streaming;
+		break;
+
+	case USB_SPEED_FULL:
+	default:
+		uvc_control_desc = uvc->desc.fs_control;
+		uvc_streaming_cls = uvc->desc.fs_streaming;
+		uvc_streaming_std = uvc_fs_streaming;
+		break;
+	}
+
+	if (!uvc_control_desc || !uvc_streaming_cls)
+		return ERR_PTR(-ENODEV);
+
+	/*
+	 * Descriptors layout
+	 *
+	 * uvc_iad
+	 * uvc_control_intf
+	 * Class-specific UVC control descriptors
+	 * uvc_control_ep
+	 * uvc_control_cs_ep
+	 * uvc_ss_control_comp (for SS only)
+	 * uvc_streaming_intf_alt0
+	 * Class-specific UVC streaming descriptors
+	 * uvc_{fs|hs}_streaming
+	 */
+
+	/* Count descriptors and compute their size. */
+	control_size = 0;
+	streaming_size = 0;
+	bytes = uvc_iad.bLength + uvc_control_intf.bLength
+	      + uvc_control_ep.bLength + uvc_control_cs_ep.bLength
+	      + uvc_streaming_intf_alt0.bLength;
+
+	if (speed == USB_SPEED_SUPER) {
+		bytes += uvc_ss_control_comp.bLength;
+		n_desc = 6;
+	} else {
+		n_desc = 5;
+	}
+
+	for (src = (const struct usb_descriptor_header **)uvc_control_desc;
+	     *src; ++src) {
+		control_size += (*src)->bLength;
+		bytes += (*src)->bLength;
+		n_desc++;
+	}
+	for (src = (const struct usb_descriptor_header **)uvc_streaming_cls;
+	     *src; ++src) {
+		streaming_size += (*src)->bLength;
+		bytes += (*src)->bLength;
+		n_desc++;
+	}
+	for (src = uvc_streaming_std; *src; ++src) {
+		bytes += (*src)->bLength;
+		n_desc++;
+	}
+
+	mem = kmalloc((n_desc + 1) * sizeof(*src) + bytes, GFP_KERNEL);
+	if (mem == NULL)
+		return NULL;
+
+	hdr = mem;
+	dst = mem;
+	mem += (n_desc + 1) * sizeof(*src);
+
+	/* Copy the descriptors. */
+	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_iad);
+	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_intf);
+
+	uvc_control_header = mem;
+	UVC_COPY_DESCRIPTORS(mem, dst,
+		(const struct usb_descriptor_header **)uvc_control_desc);
+	uvc_control_header->wTotalLength = cpu_to_le16(control_size);
+	uvc_control_header->bInCollection = 1;
+	uvc_control_header->baInterfaceNr[0] = uvc->streaming_intf;
+
+	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_ep);
+	if (speed == USB_SPEED_SUPER)
+		UVC_COPY_DESCRIPTOR(mem, dst, &uvc_ss_control_comp);
+
+	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_cs_ep);
+	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_streaming_intf_alt0);
+
+	uvc_streaming_header = mem;
+	UVC_COPY_DESCRIPTORS(mem, dst,
+		(const struct usb_descriptor_header**)uvc_streaming_cls);
+	uvc_streaming_header->wTotalLength = cpu_to_le16(streaming_size);
+	uvc_streaming_header->bEndpointAddress = uvc->video.ep->address;
+
+	UVC_COPY_DESCRIPTORS(mem, dst, uvc_streaming_std);
+
+	*dst = NULL;
+	return hdr;
+}
+
+static int
+uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct uvc_device *uvc = to_uvc(f);
+	struct usb_string *us;
+	unsigned int max_packet_mult;
+	unsigned int max_packet_size;
+	struct usb_ep *ep;
+	struct f_uvc_opts *opts;
+	int ret = -EINVAL;
+
+	uvcg_info(f, "%s()\n", __func__);
+
+	opts = fi_to_f_uvc_opts(f->fi);
+	/* Sanity check the streaming endpoint module parameters. */
+	opts->streaming_interval = clamp(opts->streaming_interval, 1U, 16U);
+	opts->streaming_maxpacket = clamp(opts->streaming_maxpacket, 1U, 3072U);
+	opts->streaming_maxburst = min(opts->streaming_maxburst, 15U);
+
+	/* For SS, wMaxPacketSize has to be 1024 if bMaxBurst is not 0 */
+	if (opts->streaming_maxburst &&
+	    (opts->streaming_maxpacket % 1024) != 0) {
+		opts->streaming_maxpacket = roundup(opts->streaming_maxpacket, 1024);
+		uvcg_info(f, "overriding streaming_maxpacket to %d\n",
+			  opts->streaming_maxpacket);
+	}
+
+	/*
+	 * Fill in the FS/HS/SS Video Streaming specific descriptors from the
+	 * module parameters.
+	 *
+	 * NOTE: We assume that the user knows what they are doing and won't
+	 * give parameters that their UDC doesn't support.
+	 */
+	if (opts->streaming_maxpacket <= 1024) {
+		max_packet_mult = 1;
+		max_packet_size = opts->streaming_maxpacket;
+	} else if (opts->streaming_maxpacket <= 2048) {
+		max_packet_mult = 2;
+		max_packet_size = opts->streaming_maxpacket / 2;
+	} else {
+		max_packet_mult = 3;
+		max_packet_size = opts->streaming_maxpacket / 3;
+	}
+
+	uvc_fs_streaming_ep.wMaxPacketSize =
+		cpu_to_le16(min(opts->streaming_maxpacket, 1023U));
+	uvc_fs_streaming_ep.bInterval = opts->streaming_interval;
+
+	uvc_hs_streaming_ep.wMaxPacketSize =
+		cpu_to_le16(max_packet_size | ((max_packet_mult - 1) << 11));
+
+	/* A high-bandwidth endpoint must specify a bInterval value of 1 */
+	if (max_packet_mult > 1)
+		uvc_hs_streaming_ep.bInterval = 1;
+	else
+		uvc_hs_streaming_ep.bInterval = opts->streaming_interval;
+
+	uvc_ss_streaming_ep.wMaxPacketSize = cpu_to_le16(max_packet_size);
+	uvc_ss_streaming_ep.bInterval = opts->streaming_interval;
+	uvc_ss_streaming_comp.bmAttributes = max_packet_mult - 1;
+	uvc_ss_streaming_comp.bMaxBurst = opts->streaming_maxburst;
+	uvc_ss_streaming_comp.wBytesPerInterval =
+		cpu_to_le16(max_packet_size * max_packet_mult *
+			    (opts->streaming_maxburst + 1));
+
+	/* Allocate endpoints. */
+	ep = usb_ep_autoconfig(cdev->gadget, &uvc_control_ep);
+	if (!ep) {
+		uvcg_info(f, "Unable to allocate control EP\n");
+		goto error;
+	}
+	uvc->control_ep = ep;
+
+	if (gadget_is_superspeed(c->cdev->gadget))
+		ep = usb_ep_autoconfig_ss(cdev->gadget, &uvc_ss_streaming_ep,
+					  &uvc_ss_streaming_comp);
+	else if (gadget_is_dualspeed(cdev->gadget))
+		ep = usb_ep_autoconfig(cdev->gadget, &uvc_hs_streaming_ep);
+	else
+		ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_streaming_ep);
+
+	if (!ep) {
+		uvcg_info(f, "Unable to allocate streaming EP\n");
+		goto error;
+	}
+	uvc->video.ep = ep;
+
+	uvc_fs_streaming_ep.bEndpointAddress = uvc->video.ep->address;
+	uvc_hs_streaming_ep.bEndpointAddress = uvc->video.ep->address;
+	uvc_ss_streaming_ep.bEndpointAddress = uvc->video.ep->address;
+
+	uvc_en_us_strings[UVC_STRING_CONTROL_IDX].s = opts->function_name;
+	us = usb_gstrings_attach(cdev, uvc_function_strings,
+				 ARRAY_SIZE(uvc_en_us_strings));
+	if (IS_ERR(us)) {
+		ret = PTR_ERR(us);
+		goto error;
+	}
+	uvc_iad.iFunction = us[UVC_STRING_CONTROL_IDX].id;
+	uvc_control_intf.iInterface = us[UVC_STRING_CONTROL_IDX].id;
+	ret = us[UVC_STRING_STREAMING_IDX].id;
+	uvc_streaming_intf_alt0.iInterface = ret;
+	uvc_streaming_intf_alt1.iInterface = ret;
+
+	/* Allocate interface IDs. */
+	if ((ret = usb_interface_id(c, f)) < 0)
+		goto error;
+	uvc_iad.bFirstInterface = ret;
+	uvc_control_intf.bInterfaceNumber = ret;
+	uvc->control_intf = ret;
+	opts->control_interface = ret;
+
+	if ((ret = usb_interface_id(c, f)) < 0)
+		goto error;
+	uvc_streaming_intf_alt0.bInterfaceNumber = ret;
+	uvc_streaming_intf_alt1.bInterfaceNumber = ret;
+	uvc->streaming_intf = ret;
+	opts->streaming_interface = ret;
+
+	/* Copy descriptors */
+	f->fs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_FULL);
+	if (IS_ERR(f->fs_descriptors)) {
+		ret = PTR_ERR(f->fs_descriptors);
+		f->fs_descriptors = NULL;
+		goto error;
+	}
+	if (gadget_is_dualspeed(cdev->gadget)) {
+		f->hs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_HIGH);
+		if (IS_ERR(f->hs_descriptors)) {
+			ret = PTR_ERR(f->hs_descriptors);
+			f->hs_descriptors = NULL;
+			goto error;
+		}
+	}
+	if (gadget_is_superspeed(c->cdev->gadget)) {
+		f->ss_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_SUPER);
+		if (IS_ERR(f->ss_descriptors)) {
+			ret = PTR_ERR(f->ss_descriptors);
+			f->ss_descriptors = NULL;
+			goto error;
+		}
+	}
+
+	/* Preallocate control endpoint request. */
+	uvc->control_req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL);
+	uvc->control_buf = kmalloc(UVC_MAX_REQUEST_SIZE, GFP_KERNEL);
+	if (uvc->control_req == NULL || uvc->control_buf == NULL) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	uvc->control_req->buf = uvc->control_buf;
+	uvc->control_req->complete = uvc_function_ep0_complete;
+	uvc->control_req->context = uvc;
+
+	if (v4l2_device_register(&cdev->gadget->dev, &uvc->v4l2_dev)) {
+		uvcg_err(f, "failed to register V4L2 device\n");
+		goto error;
+	}
+
+	/* Initialise video. */
+	ret = uvcg_video_init(&uvc->video, uvc);
+	if (ret < 0)
+		goto v4l2_error;
+
+	/* Register a V4L2 device. */
+	ret = uvc_register_video(uvc);
+	if (ret < 0) {
+		uvcg_err(f, "failed to register video device\n");
+		goto v4l2_error;
+	}
+
+	return 0;
+
+v4l2_error:
+	v4l2_device_unregister(&uvc->v4l2_dev);
+error:
+	if (uvc->control_req)
+		usb_ep_free_request(cdev->gadget->ep0, uvc->control_req);
+	kfree(uvc->control_buf);
+
+	usb_free_all_descriptors(f);
+	return ret;
+}
+
+/* --------------------------------------------------------------------------
+ * USB gadget function
+ */
+
+static void uvc_free_inst(struct usb_function_instance *f)
+{
+	struct f_uvc_opts *opts = fi_to_f_uvc_opts(f);
+
+	mutex_destroy(&opts->lock);
+	kfree(opts);
+}
+
+static struct usb_function_instance *uvc_alloc_inst(void)
+{
+	struct f_uvc_opts *opts;
+	struct uvc_camera_terminal_descriptor *cd;
+	struct uvc_processing_unit_descriptor *pd;
+	struct uvc_output_terminal_descriptor *od;
+	struct uvc_color_matching_descriptor *md;
+	struct uvc_descriptor_header **ctl_cls;
+	int ret;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+	opts->func_inst.free_func_inst = uvc_free_inst;
+	mutex_init(&opts->lock);
+
+	cd = &opts->uvc_camera_terminal;
+	cd->bLength			= UVC_DT_CAMERA_TERMINAL_SIZE(3);
+	cd->bDescriptorType		= USB_DT_CS_INTERFACE;
+	cd->bDescriptorSubType		= UVC_VC_INPUT_TERMINAL;
+	cd->bTerminalID			= 1;
+	cd->wTerminalType		= cpu_to_le16(0x0201);
+	cd->bAssocTerminal		= 0;
+	cd->iTerminal			= 0;
+	cd->wObjectiveFocalLengthMin	= cpu_to_le16(0);
+	cd->wObjectiveFocalLengthMax	= cpu_to_le16(0);
+	cd->wOcularFocalLength		= cpu_to_le16(0);
+	cd->bControlSize		= 3;
+	cd->bmControls[0]		= 2;
+	cd->bmControls[1]		= 0;
+	cd->bmControls[2]		= 0;
+
+	pd = &opts->uvc_processing;
+	pd->bLength			= UVC_DT_PROCESSING_UNIT_SIZE(2);
+	pd->bDescriptorType		= USB_DT_CS_INTERFACE;
+	pd->bDescriptorSubType		= UVC_VC_PROCESSING_UNIT;
+	pd->bUnitID			= 2;
+	pd->bSourceID			= 1;
+	pd->wMaxMultiplier		= cpu_to_le16(16*1024);
+	pd->bControlSize		= 2;
+	pd->bmControls[0]		= 1;
+	pd->bmControls[1]		= 0;
+	pd->iProcessing			= 0;
+	pd->bmVideoStandards		= 0;
+
+	od = &opts->uvc_output_terminal;
+	od->bLength			= UVC_DT_OUTPUT_TERMINAL_SIZE;
+	od->bDescriptorType		= USB_DT_CS_INTERFACE;
+	od->bDescriptorSubType		= UVC_VC_OUTPUT_TERMINAL;
+	od->bTerminalID			= 3;
+	od->wTerminalType		= cpu_to_le16(0x0101);
+	od->bAssocTerminal		= 0;
+	od->bSourceID			= 2;
+	od->iTerminal			= 0;
+
+	md = &opts->uvc_color_matching;
+	md->bLength			= UVC_DT_COLOR_MATCHING_SIZE;
+	md->bDescriptorType		= USB_DT_CS_INTERFACE;
+	md->bDescriptorSubType		= UVC_VS_COLORFORMAT;
+	md->bColorPrimaries		= 1;
+	md->bTransferCharacteristics	= 1;
+	md->bMatrixCoefficients		= 4;
+
+	/* Prepare fs control class descriptors for configfs-based gadgets */
+	ctl_cls = opts->uvc_fs_control_cls;
+	ctl_cls[0] = NULL;	/* assigned elsewhere by configfs */
+	ctl_cls[1] = (struct uvc_descriptor_header *)cd;
+	ctl_cls[2] = (struct uvc_descriptor_header *)pd;
+	ctl_cls[3] = (struct uvc_descriptor_header *)od;
+	ctl_cls[4] = NULL;	/* NULL-terminate */
+	opts->fs_control =
+		(const struct uvc_descriptor_header * const *)ctl_cls;
+
+	/* Prepare hs control class descriptors for configfs-based gadgets */
+	ctl_cls = opts->uvc_ss_control_cls;
+	ctl_cls[0] = NULL;	/* assigned elsewhere by configfs */
+	ctl_cls[1] = (struct uvc_descriptor_header *)cd;
+	ctl_cls[2] = (struct uvc_descriptor_header *)pd;
+	ctl_cls[3] = (struct uvc_descriptor_header *)od;
+	ctl_cls[4] = NULL;	/* NULL-terminate */
+	opts->ss_control =
+		(const struct uvc_descriptor_header * const *)ctl_cls;
+
+	opts->streaming_interval = 1;
+	opts->streaming_maxpacket = 1024;
+	snprintf(opts->function_name, sizeof(opts->function_name), "UVC Camera");
+
+	ret = uvcg_attach_configfs(opts);
+	if (ret < 0) {
+		kfree(opts);
+		return ERR_PTR(ret);
+	}
+
+	return &opts->func_inst;
+}
+
+static void uvc_free(struct usb_function *f)
+{
+	struct uvc_device *uvc = to_uvc(f);
+	struct f_uvc_opts *opts = container_of(f->fi, struct f_uvc_opts,
+					       func_inst);
+	config_item_put(&uvc->header->item);
+	--opts->refcnt;
+	kfree(uvc);
+}
+
+static void uvc_function_unbind(struct usb_configuration *c,
+				struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct uvc_device *uvc = to_uvc(f);
+	struct uvc_video *video = &uvc->video;
+	long wait_ret = 1;
+
+	uvcg_info(f, "%s()\n", __func__);
+
+	if (video->async_wq)
+		destroy_workqueue(video->async_wq);
+
+	/*
+	 * If we know we're connected via v4l2, then there should be a cleanup
+	 * of the device from userspace either via UVC_EVENT_DISCONNECT or
+	 * though the video device removal uevent. Allow some time for the
+	 * application to close out before things get deleted.
+	 */
+	if (uvc->func_connected) {
+		uvcg_dbg(f, "waiting for clean disconnect\n");
+		wait_ret = wait_event_interruptible_timeout(uvc->func_connected_queue,
+				uvc->func_connected == false, msecs_to_jiffies(500));
+		uvcg_dbg(f, "done waiting with ret: %ld\n", wait_ret);
+	}
+
+	device_remove_file(&uvc->vdev.dev, &dev_attr_function_name);
+	video_unregister_device(&uvc->vdev);
+	v4l2_device_unregister(&uvc->v4l2_dev);
+
+	if (uvc->func_connected) {
+		/*
+		 * Wait for the release to occur to ensure there are no longer any
+		 * pending operations that may cause panics when resources are cleaned
+		 * up.
+		 */
+		uvcg_warn(f, "%s no clean disconnect, wait for release\n", __func__);
+		wait_ret = wait_event_interruptible_timeout(uvc->func_connected_queue,
+				uvc->func_connected == false, msecs_to_jiffies(1000));
+		uvcg_dbg(f, "done waiting for release with ret: %ld\n", wait_ret);
+	}
+
+	usb_ep_free_request(cdev->gadget->ep0, uvc->control_req);
+	kfree(uvc->control_buf);
+
+	usb_free_all_descriptors(f);
+}
+
+static struct usb_function *uvc_alloc(struct usb_function_instance *fi)
+{
+	struct uvc_device *uvc;
+	struct f_uvc_opts *opts;
+	struct uvc_descriptor_header **strm_cls;
+	struct config_item *streaming, *header, *h;
+
+	uvc = kzalloc(sizeof(*uvc), GFP_KERNEL);
+	if (uvc == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&uvc->video.mutex);
+	uvc->state = UVC_STATE_DISCONNECTED;
+	init_waitqueue_head(&uvc->func_connected_queue);
+	opts = fi_to_f_uvc_opts(fi);
+
+	mutex_lock(&opts->lock);
+	if (opts->uvc_fs_streaming_cls) {
+		strm_cls = opts->uvc_fs_streaming_cls;
+		opts->fs_streaming =
+			(const struct uvc_descriptor_header * const *)strm_cls;
+	}
+	if (opts->uvc_hs_streaming_cls) {
+		strm_cls = opts->uvc_hs_streaming_cls;
+		opts->hs_streaming =
+			(const struct uvc_descriptor_header * const *)strm_cls;
+	}
+	if (opts->uvc_ss_streaming_cls) {
+		strm_cls = opts->uvc_ss_streaming_cls;
+		opts->ss_streaming =
+			(const struct uvc_descriptor_header * const *)strm_cls;
+	}
+
+	uvc->desc.fs_control = opts->fs_control;
+	uvc->desc.ss_control = opts->ss_control;
+	uvc->desc.fs_streaming = opts->fs_streaming;
+	uvc->desc.hs_streaming = opts->hs_streaming;
+	uvc->desc.ss_streaming = opts->ss_streaming;
+
+	streaming = config_group_find_item(&opts->func_inst.group, "streaming");
+	if (!streaming)
+		goto err_config;
+
+	header = config_group_find_item(to_config_group(streaming), "header");
+	config_item_put(streaming);
+	if (!header)
+		goto err_config;
+
+	h = config_group_find_item(to_config_group(header), "h");
+	config_item_put(header);
+	if (!h)
+		goto err_config;
+
+	uvc->header = to_uvcg_streaming_header(h);
+	if (!uvc->header->linked) {
+		mutex_unlock(&opts->lock);
+		kfree(uvc);
+		return ERR_PTR(-EBUSY);
+	}
+
+	++opts->refcnt;
+	mutex_unlock(&opts->lock);
+
+	/* Register the function. */
+	uvc->func.name = "uvc";
+	uvc->func.bind = uvc_function_bind;
+	uvc->func.unbind = uvc_function_unbind;
+	uvc->func.get_alt = uvc_function_get_alt;
+	uvc->func.set_alt = uvc_function_set_alt;
+	uvc->func.disable = uvc_function_disable;
+	uvc->func.setup = uvc_function_setup;
+	uvc->func.free_func = uvc_free;
+	uvc->func.bind_deactivated = true;
+
+	return &uvc->func;
+
+err_config:
+	mutex_unlock(&opts->lock);
+	kfree(uvc);
+	return ERR_PTR(-ENOENT);
+}
+
+DECLARE_USB_FUNCTION_INIT(uvc, uvc_alloc_inst, uvc_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Laurent Pinchart");
diff --git a/drivers/usb/gadget/function/f_uvc.h b/drivers/usb/gadget/function/f_uvc.h
new file mode 100644
index 000000000..1db972d4b
--- /dev/null
+++ b/drivers/usb/gadget/function/f_uvc.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *	f_uvc.h  --  USB Video Class Gadget driver
+ *
+ *	Copyright (C) 2009-2010
+ *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#ifndef _F_UVC_H_
+#define _F_UVC_H_
+
+struct uvc_device;
+
+void uvc_function_setup_continue(struct uvc_device *uvc);
+
+void uvc_function_connect(struct uvc_device *uvc);
+
+void uvc_function_disconnect(struct uvc_device *uvc);
+
+#endif /* _F_UVC_H_ */
diff --git a/drivers/usb/gadget/function/g_zero.h b/drivers/usb/gadget/function/g_zero.h
new file mode 100644
index 000000000..98b8462ad
--- /dev/null
+++ b/drivers/usb/gadget/function/g_zero.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header declares the utility functions used by "Gadget Zero", plus
+ * interfaces to its two single-configuration function drivers.
+ */
+
+#ifndef __G_ZERO_H
+#define __G_ZERO_H
+
+#define GZERO_BULK_BUFLEN	4096
+#define GZERO_QLEN		32
+#define GZERO_ISOC_INTERVAL	4
+#define GZERO_ISOC_MAXPACKET	1024
+#define GZERO_SS_BULK_QLEN	1
+#define GZERO_SS_ISO_QLEN	8
+
+struct usb_zero_options {
+	unsigned pattern;
+	unsigned isoc_interval;
+	unsigned isoc_maxpacket;
+	unsigned isoc_mult;
+	unsigned isoc_maxburst;
+	unsigned bulk_buflen;
+	unsigned qlen;
+	unsigned ss_bulk_qlen;
+	unsigned ss_iso_qlen;
+};
+
+struct f_ss_opts {
+	struct usb_function_instance func_inst;
+	unsigned pattern;
+	unsigned isoc_interval;
+	unsigned isoc_maxpacket;
+	unsigned isoc_mult;
+	unsigned isoc_maxburst;
+	unsigned bulk_buflen;
+	unsigned bulk_qlen;
+	unsigned iso_qlen;
+
+	/*
+	 * Read/write access to configfs attributes is handled by configfs.
+	 *
+	 * This is to protect the data from concurrent access by read/write
+	 * and create symlink/remove symlink.
+	 */
+	struct mutex			lock;
+	int				refcnt;
+};
+
+struct f_lb_opts {
+	struct usb_function_instance func_inst;
+	unsigned bulk_buflen;
+	unsigned qlen;
+
+	/*
+	 * Read/write access to configfs attributes is handled by configfs.
+	 *
+	 * This is to protect the data from concurrent access by read/write
+	 * and create symlink/remove symlink.
+	 */
+	struct mutex			lock;
+	int				refcnt;
+};
+
+void lb_modexit(void);
+int lb_modinit(void);
+
+/* common utilities */
+void disable_endpoints(struct usb_composite_dev *cdev,
+		struct usb_ep *in, struct usb_ep *out,
+		struct usb_ep *iso_in, struct usb_ep *iso_out);
+
+#endif /* __G_ZERO_H */
diff --git a/drivers/usb/gadget/function/ndis.h b/drivers/usb/gadget/function/ndis.h
new file mode 100644
index 000000000..a19f72dec
--- /dev/null
+++ b/drivers/usb/gadget/function/ndis.h
@@ -0,0 +1,47 @@
+/*
+ * ndis.h
+ *
+ * ntddndis.h modified by Benedikt Spranger <b.spranger@pengutronix.de>
+ *
+ * Thanks to the cygwin development team,
+ * espacially to Casper S. Hornstrup <chorns@users.sourceforge.net>
+ *
+ * THIS SOFTWARE IS NOT COPYRIGHTED
+ *
+ * This source code is offered for use in the public domain. You may
+ * use, modify or distribute it freely.
+ */
+
+#ifndef _LINUX_NDIS_H
+#define _LINUX_NDIS_H
+
+enum NDIS_DEVICE_POWER_STATE {
+	NdisDeviceStateUnspecified = 0,
+	NdisDeviceStateD0,
+	NdisDeviceStateD1,
+	NdisDeviceStateD2,
+	NdisDeviceStateD3,
+	NdisDeviceStateMaximum
+};
+
+struct NDIS_PM_WAKE_UP_CAPABILITIES {
+	enum NDIS_DEVICE_POWER_STATE  MinMagicPacketWakeUp;
+	enum NDIS_DEVICE_POWER_STATE  MinPatternWakeUp;
+	enum NDIS_DEVICE_POWER_STATE  MinLinkChangeWakeUp;
+};
+
+struct NDIS_PNP_CAPABILITIES {
+	__le32					Flags;
+	struct NDIS_PM_WAKE_UP_CAPABILITIES	WakeUpCapabilities;
+};
+
+struct NDIS_PM_PACKET_PATTERN {
+	__le32	Priority;
+	__le32	Reserved;
+	__le32	MaskSize;
+	__le32	PatternOffset;
+	__le32	PatternSize;
+	__le32	PatternFlags;
+};
+
+#endif /* _LINUX_NDIS_H */
diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c
new file mode 100644
index 000000000..29bf8664b
--- /dev/null
+++ b/drivers/usb/gadget/function/rndis.c
@@ -0,0 +1,1189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RNDIS MSG parser
+ *
+ * Authors:	Benedikt Spranger, Pengutronix
+ *		Robert Schwebel, Pengutronix
+ *
+ *		This software was originally developed in conformance with
+ *		Microsoft's Remote NDIS Specification License Agreement.
+ *
+ * 03/12/2004 Kai-Uwe Bloem <linux-development@auerswald.de>
+ *		Fixed message length bug in init_response
+ *
+ * 03/25/2004 Kai-Uwe Bloem <linux-development@auerswald.de>
+ *		Fixed rndis_rm_hdr length bug.
+ *
+ * Copyright (C) 2004 by David Brownell
+ *		updates to merge with Linux 2.6, better match RNDIS spec
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/idr.h>
+#include <linux/list.h>
+#include <linux/proc_fs.h>
+#include <linux/slab.h>
+#include <linux/seq_file.h>
+#include <linux/netdevice.h>
+
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+#include "u_rndis.h"
+
+#undef	VERBOSE_DEBUG
+
+#include "rndis.h"
+
+
+/* The driver for your USB chip needs to support ep0 OUT to work with
+ * RNDIS, plus all three CDC Ethernet endpoints (interrupt not optional).
+ *
+ * Windows hosts need an INF file like Documentation/usb/linux.inf
+ * and will be happier if you provide the host_addr module parameter.
+ */
+
+#if 0
+static int rndis_debug = 0;
+module_param (rndis_debug, int, 0);
+MODULE_PARM_DESC (rndis_debug, "enable debugging");
+#else
+#define rndis_debug		0
+#endif
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+#define	NAME_TEMPLATE "driver/rndis-%03d"
+
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
+
+static DEFINE_IDA(rndis_ida);
+
+/* Driver Version */
+static const __le32 rndis_driver_version = cpu_to_le32(1);
+
+/* Function Prototypes */
+static rndis_resp_t *rndis_add_response(struct rndis_params *params,
+					u32 length);
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static const struct proc_ops rndis_proc_ops;
+
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
+
+/* supported OIDs */
+static const u32 oid_supported_list[] = {
+	/* the general stuff */
+	RNDIS_OID_GEN_SUPPORTED_LIST,
+	RNDIS_OID_GEN_HARDWARE_STATUS,
+	RNDIS_OID_GEN_MEDIA_SUPPORTED,
+	RNDIS_OID_GEN_MEDIA_IN_USE,
+	RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE,
+	RNDIS_OID_GEN_LINK_SPEED,
+	RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE,
+	RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE,
+	RNDIS_OID_GEN_VENDOR_ID,
+	RNDIS_OID_GEN_VENDOR_DESCRIPTION,
+	RNDIS_OID_GEN_VENDOR_DRIVER_VERSION,
+	RNDIS_OID_GEN_CURRENT_PACKET_FILTER,
+	RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE,
+	RNDIS_OID_GEN_MEDIA_CONNECT_STATUS,
+	RNDIS_OID_GEN_PHYSICAL_MEDIUM,
+
+	/* the statistical stuff */
+	RNDIS_OID_GEN_XMIT_OK,
+	RNDIS_OID_GEN_RCV_OK,
+	RNDIS_OID_GEN_XMIT_ERROR,
+	RNDIS_OID_GEN_RCV_ERROR,
+	RNDIS_OID_GEN_RCV_NO_BUFFER,
+#ifdef	RNDIS_OPTIONAL_STATS
+	RNDIS_OID_GEN_DIRECTED_BYTES_XMIT,
+	RNDIS_OID_GEN_DIRECTED_FRAMES_XMIT,
+	RNDIS_OID_GEN_MULTICAST_BYTES_XMIT,
+	RNDIS_OID_GEN_MULTICAST_FRAMES_XMIT,
+	RNDIS_OID_GEN_BROADCAST_BYTES_XMIT,
+	RNDIS_OID_GEN_BROADCAST_FRAMES_XMIT,
+	RNDIS_OID_GEN_DIRECTED_BYTES_RCV,
+	RNDIS_OID_GEN_DIRECTED_FRAMES_RCV,
+	RNDIS_OID_GEN_MULTICAST_BYTES_RCV,
+	RNDIS_OID_GEN_MULTICAST_FRAMES_RCV,
+	RNDIS_OID_GEN_BROADCAST_BYTES_RCV,
+	RNDIS_OID_GEN_BROADCAST_FRAMES_RCV,
+	RNDIS_OID_GEN_RCV_CRC_ERROR,
+	RNDIS_OID_GEN_TRANSMIT_QUEUE_LENGTH,
+#endif	/* RNDIS_OPTIONAL_STATS */
+
+	/* mandatory 802.3 */
+	/* the general stuff */
+	RNDIS_OID_802_3_PERMANENT_ADDRESS,
+	RNDIS_OID_802_3_CURRENT_ADDRESS,
+	RNDIS_OID_802_3_MULTICAST_LIST,
+	RNDIS_OID_802_3_MAC_OPTIONS,
+	RNDIS_OID_802_3_MAXIMUM_LIST_SIZE,
+
+	/* the statistical stuff */
+	RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT,
+	RNDIS_OID_802_3_XMIT_ONE_COLLISION,
+	RNDIS_OID_802_3_XMIT_MORE_COLLISIONS,
+#ifdef	RNDIS_OPTIONAL_STATS
+	RNDIS_OID_802_3_XMIT_DEFERRED,
+	RNDIS_OID_802_3_XMIT_MAX_COLLISIONS,
+	RNDIS_OID_802_3_RCV_OVERRUN,
+	RNDIS_OID_802_3_XMIT_UNDERRUN,
+	RNDIS_OID_802_3_XMIT_HEARTBEAT_FAILURE,
+	RNDIS_OID_802_3_XMIT_TIMES_CRS_LOST,
+	RNDIS_OID_802_3_XMIT_LATE_COLLISIONS,
+#endif	/* RNDIS_OPTIONAL_STATS */
+
+#ifdef	RNDIS_PM
+	/* PM and wakeup are "mandatory" for USB, but the RNDIS specs
+	 * don't say what they mean ... and the NDIS specs are often
+	 * confusing and/or ambiguous in this context.  (That is, more
+	 * so than their specs for the other OIDs.)
+	 *
+	 * FIXME someone who knows what these should do, please
+	 * implement them!
+	 */
+
+	/* power management */
+	OID_PNP_CAPABILITIES,
+	OID_PNP_QUERY_POWER,
+	OID_PNP_SET_POWER,
+
+#ifdef	RNDIS_WAKEUP
+	/* wake up host */
+	OID_PNP_ENABLE_WAKE_UP,
+	OID_PNP_ADD_WAKE_UP_PATTERN,
+	OID_PNP_REMOVE_WAKE_UP_PATTERN,
+#endif	/* RNDIS_WAKEUP */
+#endif	/* RNDIS_PM */
+};
+
+
+/* NDIS Functions */
+static int gen_ndis_query_resp(struct rndis_params *params, u32 OID, u8 *buf,
+			       unsigned buf_len, rndis_resp_t *r)
+{
+	int retval = -ENOTSUPP;
+	u32 length = 4;	/* usually */
+	__le32 *outbuf;
+	int i, count;
+	rndis_query_cmplt_type *resp;
+	struct net_device *net;
+	struct rtnl_link_stats64 temp;
+	const struct rtnl_link_stats64 *stats;
+
+	if (!r) return -ENOMEM;
+	resp = (rndis_query_cmplt_type *)r->buf;
+
+	if (!resp) return -ENOMEM;
+
+	if (buf_len && rndis_debug > 1) {
+		pr_debug("query OID %08x value, len %d:\n", OID, buf_len);
+		for (i = 0; i < buf_len; i += 16) {
+			pr_debug("%03d: %08x %08x %08x %08x\n", i,
+				get_unaligned_le32(&buf[i]),
+				get_unaligned_le32(&buf[i + 4]),
+				get_unaligned_le32(&buf[i + 8]),
+				get_unaligned_le32(&buf[i + 12]));
+		}
+	}
+
+	/* response goes here, right after the header */
+	outbuf = (__le32 *)&resp[1];
+	resp->InformationBufferOffset = cpu_to_le32(16);
+
+	net = params->dev;
+	stats = dev_get_stats(net, &temp);
+
+	switch (OID) {
+
+	/* general oids (table 4-1) */
+
+	/* mandatory */
+	case RNDIS_OID_GEN_SUPPORTED_LIST:
+		pr_debug("%s: RNDIS_OID_GEN_SUPPORTED_LIST\n", __func__);
+		length = sizeof(oid_supported_list);
+		count  = length / sizeof(u32);
+		for (i = 0; i < count; i++)
+			outbuf[i] = cpu_to_le32(oid_supported_list[i]);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_HARDWARE_STATUS:
+		pr_debug("%s: RNDIS_OID_GEN_HARDWARE_STATUS\n", __func__);
+		/* Bogus question!
+		 * Hardware must be ready to receive high level protocols.
+		 * BTW:
+		 * reddite ergo quae sunt Caesaris Caesari
+		 * et quae sunt Dei Deo!
+		 */
+		*outbuf = cpu_to_le32(0);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_MEDIA_SUPPORTED:
+		pr_debug("%s: RNDIS_OID_GEN_MEDIA_SUPPORTED\n", __func__);
+		*outbuf = cpu_to_le32(params->medium);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_MEDIA_IN_USE:
+		pr_debug("%s: RNDIS_OID_GEN_MEDIA_IN_USE\n", __func__);
+		/* one medium, one transport... (maybe you do it better) */
+		*outbuf = cpu_to_le32(params->medium);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE:
+		pr_debug("%s: RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE\n", __func__);
+		if (params->dev) {
+			*outbuf = cpu_to_le32(params->dev->mtu);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_LINK_SPEED:
+		if (rndis_debug > 1)
+			pr_debug("%s: RNDIS_OID_GEN_LINK_SPEED\n", __func__);
+		if (params->media_state == RNDIS_MEDIA_STATE_DISCONNECTED)
+			*outbuf = cpu_to_le32(0);
+		else
+			*outbuf = cpu_to_le32(params->speed);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE:
+		pr_debug("%s: RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE\n", __func__);
+		if (params->dev) {
+			*outbuf = cpu_to_le32(params->dev->mtu);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE:
+		pr_debug("%s: RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE\n", __func__);
+		if (params->dev) {
+			*outbuf = cpu_to_le32(params->dev->mtu);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_VENDOR_ID:
+		pr_debug("%s: RNDIS_OID_GEN_VENDOR_ID\n", __func__);
+		*outbuf = cpu_to_le32(params->vendorID);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_VENDOR_DESCRIPTION:
+		pr_debug("%s: RNDIS_OID_GEN_VENDOR_DESCRIPTION\n", __func__);
+		if (params->vendorDescr) {
+			length = strlen(params->vendorDescr);
+			memcpy(outbuf, params->vendorDescr, length);
+		} else {
+			outbuf[0] = 0;
+		}
+		retval = 0;
+		break;
+
+	case RNDIS_OID_GEN_VENDOR_DRIVER_VERSION:
+		pr_debug("%s: RNDIS_OID_GEN_VENDOR_DRIVER_VERSION\n", __func__);
+		/* Created as LE */
+		*outbuf = rndis_driver_version;
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_CURRENT_PACKET_FILTER:
+		pr_debug("%s: RNDIS_OID_GEN_CURRENT_PACKET_FILTER\n", __func__);
+		*outbuf = cpu_to_le32(*params->filter);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE:
+		pr_debug("%s: RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE\n", __func__);
+		*outbuf = cpu_to_le32(RNDIS_MAX_TOTAL_SIZE);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_MEDIA_CONNECT_STATUS:
+		if (rndis_debug > 1)
+			pr_debug("%s: RNDIS_OID_GEN_MEDIA_CONNECT_STATUS\n", __func__);
+		*outbuf = cpu_to_le32(params->media_state);
+		retval = 0;
+		break;
+
+	case RNDIS_OID_GEN_PHYSICAL_MEDIUM:
+		pr_debug("%s: RNDIS_OID_GEN_PHYSICAL_MEDIUM\n", __func__);
+		*outbuf = cpu_to_le32(0);
+		retval = 0;
+		break;
+
+	/* The RNDIS specification is incomplete/wrong.   Some versions
+	 * of MS-Windows expect OIDs that aren't specified there.  Other
+	 * versions emit undefined RNDIS messages. DOCUMENT ALL THESE!
+	 */
+	case RNDIS_OID_GEN_MAC_OPTIONS:		/* from WinME */
+		pr_debug("%s: RNDIS_OID_GEN_MAC_OPTIONS\n", __func__);
+		*outbuf = cpu_to_le32(
+			  RNDIS_MAC_OPTION_RECEIVE_SERIALIZED
+			| RNDIS_MAC_OPTION_FULL_DUPLEX);
+		retval = 0;
+		break;
+
+	/* statistics OIDs (table 4-2) */
+
+	/* mandatory */
+	case RNDIS_OID_GEN_XMIT_OK:
+		if (rndis_debug > 1)
+			pr_debug("%s: RNDIS_OID_GEN_XMIT_OK\n", __func__);
+		if (stats) {
+			*outbuf = cpu_to_le32(stats->tx_packets
+				- stats->tx_errors - stats->tx_dropped);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_RCV_OK:
+		if (rndis_debug > 1)
+			pr_debug("%s: RNDIS_OID_GEN_RCV_OK\n", __func__);
+		if (stats) {
+			*outbuf = cpu_to_le32(stats->rx_packets
+				- stats->rx_errors - stats->rx_dropped);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_XMIT_ERROR:
+		if (rndis_debug > 1)
+			pr_debug("%s: RNDIS_OID_GEN_XMIT_ERROR\n", __func__);
+		if (stats) {
+			*outbuf = cpu_to_le32(stats->tx_errors);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_RCV_ERROR:
+		if (rndis_debug > 1)
+			pr_debug("%s: RNDIS_OID_GEN_RCV_ERROR\n", __func__);
+		if (stats) {
+			*outbuf = cpu_to_le32(stats->rx_errors);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_RCV_NO_BUFFER:
+		pr_debug("%s: RNDIS_OID_GEN_RCV_NO_BUFFER\n", __func__);
+		if (stats) {
+			*outbuf = cpu_to_le32(stats->rx_dropped);
+			retval = 0;
+		}
+		break;
+
+	/* ieee802.3 OIDs (table 4-3) */
+
+	/* mandatory */
+	case RNDIS_OID_802_3_PERMANENT_ADDRESS:
+		pr_debug("%s: RNDIS_OID_802_3_PERMANENT_ADDRESS\n", __func__);
+		if (params->dev) {
+			length = ETH_ALEN;
+			memcpy(outbuf, params->host_mac, length);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_802_3_CURRENT_ADDRESS:
+		pr_debug("%s: RNDIS_OID_802_3_CURRENT_ADDRESS\n", __func__);
+		if (params->dev) {
+			length = ETH_ALEN;
+			memcpy(outbuf, params->host_mac, length);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_802_3_MULTICAST_LIST:
+		pr_debug("%s: RNDIS_OID_802_3_MULTICAST_LIST\n", __func__);
+		/* Multicast base address only */
+		*outbuf = cpu_to_le32(0xE0000000);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_802_3_MAXIMUM_LIST_SIZE:
+		pr_debug("%s: RNDIS_OID_802_3_MAXIMUM_LIST_SIZE\n", __func__);
+		/* Multicast base address only */
+		*outbuf = cpu_to_le32(1);
+		retval = 0;
+		break;
+
+	case RNDIS_OID_802_3_MAC_OPTIONS:
+		pr_debug("%s: RNDIS_OID_802_3_MAC_OPTIONS\n", __func__);
+		*outbuf = cpu_to_le32(0);
+		retval = 0;
+		break;
+
+	/* ieee802.3 statistics OIDs (table 4-4) */
+
+	/* mandatory */
+	case RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT:
+		pr_debug("%s: RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT\n", __func__);
+		if (stats) {
+			*outbuf = cpu_to_le32(stats->rx_frame_errors);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_802_3_XMIT_ONE_COLLISION:
+		pr_debug("%s: RNDIS_OID_802_3_XMIT_ONE_COLLISION\n", __func__);
+		*outbuf = cpu_to_le32(0);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_802_3_XMIT_MORE_COLLISIONS:
+		pr_debug("%s: RNDIS_OID_802_3_XMIT_MORE_COLLISIONS\n", __func__);
+		*outbuf = cpu_to_le32(0);
+		retval = 0;
+		break;
+
+	default:
+		pr_warn("%s: query unknown OID 0x%08X\n", __func__, OID);
+	}
+	if (retval < 0)
+		length = 0;
+
+	resp->InformationBufferLength = cpu_to_le32(length);
+	r->length = length + sizeof(*resp);
+	resp->MessageLength = cpu_to_le32(r->length);
+	return retval;
+}
+
+static int gen_ndis_set_resp(struct rndis_params *params, u32 OID,
+			     u8 *buf, u32 buf_len, rndis_resp_t *r)
+{
+	rndis_set_cmplt_type *resp;
+	int i, retval = -ENOTSUPP;
+
+	if (!r)
+		return -ENOMEM;
+	resp = (rndis_set_cmplt_type *)r->buf;
+	if (!resp)
+		return -ENOMEM;
+
+	if (buf_len && rndis_debug > 1) {
+		pr_debug("set OID %08x value, len %d:\n", OID, buf_len);
+		for (i = 0; i < buf_len; i += 16) {
+			pr_debug("%03d: %08x %08x %08x %08x\n", i,
+				get_unaligned_le32(&buf[i]),
+				get_unaligned_le32(&buf[i + 4]),
+				get_unaligned_le32(&buf[i + 8]),
+				get_unaligned_le32(&buf[i + 12]));
+		}
+	}
+
+	switch (OID) {
+	case RNDIS_OID_GEN_CURRENT_PACKET_FILTER:
+
+		/* these NDIS_PACKET_TYPE_* bitflags are shared with
+		 * cdc_filter; it's not RNDIS-specific
+		 * NDIS_PACKET_TYPE_x == USB_CDC_PACKET_TYPE_x for x in:
+		 *	PROMISCUOUS, DIRECTED,
+		 *	MULTICAST, ALL_MULTICAST, BROADCAST
+		 */
+		*params->filter = (u16)get_unaligned_le32(buf);
+		pr_debug("%s: RNDIS_OID_GEN_CURRENT_PACKET_FILTER %08x\n",
+			__func__, *params->filter);
+
+		/* this call has a significant side effect:  it's
+		 * what makes the packet flow start and stop, like
+		 * activating the CDC Ethernet altsetting.
+		 */
+		retval = 0;
+		if (*params->filter) {
+			params->state = RNDIS_DATA_INITIALIZED;
+			netif_carrier_on(params->dev);
+			if (netif_running(params->dev))
+				netif_wake_queue(params->dev);
+		} else {
+			params->state = RNDIS_INITIALIZED;
+			netif_carrier_off(params->dev);
+			netif_stop_queue(params->dev);
+		}
+		break;
+
+	case RNDIS_OID_802_3_MULTICAST_LIST:
+		/* I think we can ignore this */
+		pr_debug("%s: RNDIS_OID_802_3_MULTICAST_LIST\n", __func__);
+		retval = 0;
+		break;
+
+	default:
+		pr_warn("%s: set unknown OID 0x%08X, size %d\n",
+			__func__, OID, buf_len);
+	}
+
+	return retval;
+}
+
+/*
+ * Response Functions
+ */
+
+static int rndis_init_response(struct rndis_params *params,
+			       rndis_init_msg_type *buf)
+{
+	rndis_init_cmplt_type *resp;
+	rndis_resp_t *r;
+
+	if (!params->dev)
+		return -ENOTSUPP;
+
+	r = rndis_add_response(params, sizeof(rndis_init_cmplt_type));
+	if (!r)
+		return -ENOMEM;
+	resp = (rndis_init_cmplt_type *)r->buf;
+
+	resp->MessageType = cpu_to_le32(RNDIS_MSG_INIT_C);
+	resp->MessageLength = cpu_to_le32(52);
+	resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
+	resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS);
+	resp->MajorVersion = cpu_to_le32(RNDIS_MAJOR_VERSION);
+	resp->MinorVersion = cpu_to_le32(RNDIS_MINOR_VERSION);
+	resp->DeviceFlags = cpu_to_le32(RNDIS_DF_CONNECTIONLESS);
+	resp->Medium = cpu_to_le32(RNDIS_MEDIUM_802_3);
+	resp->MaxPacketsPerTransfer = cpu_to_le32(1);
+	resp->MaxTransferSize = cpu_to_le32(
+		  params->dev->mtu
+		+ sizeof(struct ethhdr)
+		+ sizeof(struct rndis_packet_msg_type)
+		+ 22);
+	resp->PacketAlignmentFactor = cpu_to_le32(0);
+	resp->AFListOffset = cpu_to_le32(0);
+	resp->AFListSize = cpu_to_le32(0);
+
+	params->resp_avail(params->v);
+	return 0;
+}
+
+static int rndis_query_response(struct rndis_params *params,
+				rndis_query_msg_type *buf)
+{
+	rndis_query_cmplt_type *resp;
+	rndis_resp_t *r;
+
+	/* pr_debug("%s: OID = %08X\n", __func__, cpu_to_le32(buf->OID)); */
+	if (!params->dev)
+		return -ENOTSUPP;
+
+	/*
+	 * we need more memory:
+	 * gen_ndis_query_resp expects enough space for
+	 * rndis_query_cmplt_type followed by data.
+	 * oid_supported_list is the largest data reply
+	 */
+	r = rndis_add_response(params,
+		sizeof(oid_supported_list) + sizeof(rndis_query_cmplt_type));
+	if (!r)
+		return -ENOMEM;
+	resp = (rndis_query_cmplt_type *)r->buf;
+
+	resp->MessageType = cpu_to_le32(RNDIS_MSG_QUERY_C);
+	resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
+
+	if (gen_ndis_query_resp(params, le32_to_cpu(buf->OID),
+			le32_to_cpu(buf->InformationBufferOffset)
+					+ 8 + (u8 *)buf,
+			le32_to_cpu(buf->InformationBufferLength),
+			r)) {
+		/* OID not supported */
+		resp->Status = cpu_to_le32(RNDIS_STATUS_NOT_SUPPORTED);
+		resp->MessageLength = cpu_to_le32(sizeof *resp);
+		resp->InformationBufferLength = cpu_to_le32(0);
+		resp->InformationBufferOffset = cpu_to_le32(0);
+	} else
+		resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS);
+
+	params->resp_avail(params->v);
+	return 0;
+}
+
+static int rndis_set_response(struct rndis_params *params,
+			      rndis_set_msg_type *buf)
+{
+	u32 BufLength, BufOffset;
+	rndis_set_cmplt_type *resp;
+	rndis_resp_t *r;
+
+	BufLength = le32_to_cpu(buf->InformationBufferLength);
+	BufOffset = le32_to_cpu(buf->InformationBufferOffset);
+	if ((BufLength > RNDIS_MAX_TOTAL_SIZE) ||
+	    (BufOffset > RNDIS_MAX_TOTAL_SIZE) ||
+	    (BufOffset + 8 >= RNDIS_MAX_TOTAL_SIZE))
+		    return -EINVAL;
+
+	r = rndis_add_response(params, sizeof(rndis_set_cmplt_type));
+	if (!r)
+		return -ENOMEM;
+	resp = (rndis_set_cmplt_type *)r->buf;
+
+#ifdef	VERBOSE_DEBUG
+	pr_debug("%s: Length: %d\n", __func__, BufLength);
+	pr_debug("%s: Offset: %d\n", __func__, BufOffset);
+	pr_debug("%s: InfoBuffer: ", __func__);
+
+	for (i = 0; i < BufLength; i++) {
+		pr_debug("%02x ", *(((u8 *) buf) + i + 8 + BufOffset));
+	}
+
+	pr_debug("\n");
+#endif
+
+	resp->MessageType = cpu_to_le32(RNDIS_MSG_SET_C);
+	resp->MessageLength = cpu_to_le32(16);
+	resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
+	if (gen_ndis_set_resp(params, le32_to_cpu(buf->OID),
+			((u8 *)buf) + 8 + BufOffset, BufLength, r))
+		resp->Status = cpu_to_le32(RNDIS_STATUS_NOT_SUPPORTED);
+	else
+		resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS);
+
+	params->resp_avail(params->v);
+	return 0;
+}
+
+static int rndis_reset_response(struct rndis_params *params,
+				rndis_reset_msg_type *buf)
+{
+	rndis_reset_cmplt_type *resp;
+	rndis_resp_t *r;
+	u8 *xbuf;
+	u32 length;
+
+	/* drain the response queue */
+	while ((xbuf = rndis_get_next_response(params, &length)))
+		rndis_free_response(params, xbuf);
+
+	r = rndis_add_response(params, sizeof(rndis_reset_cmplt_type));
+	if (!r)
+		return -ENOMEM;
+	resp = (rndis_reset_cmplt_type *)r->buf;
+
+	resp->MessageType = cpu_to_le32(RNDIS_MSG_RESET_C);
+	resp->MessageLength = cpu_to_le32(16);
+	resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS);
+	/* resent information */
+	resp->AddressingReset = cpu_to_le32(1);
+
+	params->resp_avail(params->v);
+	return 0;
+}
+
+static int rndis_keepalive_response(struct rndis_params *params,
+				    rndis_keepalive_msg_type *buf)
+{
+	rndis_keepalive_cmplt_type *resp;
+	rndis_resp_t *r;
+
+	/* host "should" check only in RNDIS_DATA_INITIALIZED state */
+
+	r = rndis_add_response(params, sizeof(rndis_keepalive_cmplt_type));
+	if (!r)
+		return -ENOMEM;
+	resp = (rndis_keepalive_cmplt_type *)r->buf;
+
+	resp->MessageType = cpu_to_le32(RNDIS_MSG_KEEPALIVE_C);
+	resp->MessageLength = cpu_to_le32(16);
+	resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
+	resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS);
+
+	params->resp_avail(params->v);
+	return 0;
+}
+
+
+/*
+ * Device to Host Comunication
+ */
+static int rndis_indicate_status_msg(struct rndis_params *params, u32 status)
+{
+	rndis_indicate_status_msg_type *resp;
+	rndis_resp_t *r;
+
+	if (params->state == RNDIS_UNINITIALIZED)
+		return -ENOTSUPP;
+
+	r = rndis_add_response(params, sizeof(rndis_indicate_status_msg_type));
+	if (!r)
+		return -ENOMEM;
+	resp = (rndis_indicate_status_msg_type *)r->buf;
+
+	resp->MessageType = cpu_to_le32(RNDIS_MSG_INDICATE);
+	resp->MessageLength = cpu_to_le32(20);
+	resp->Status = cpu_to_le32(status);
+	resp->StatusBufferLength = cpu_to_le32(0);
+	resp->StatusBufferOffset = cpu_to_le32(0);
+
+	params->resp_avail(params->v);
+	return 0;
+}
+
+int rndis_signal_connect(struct rndis_params *params)
+{
+	params->media_state = RNDIS_MEDIA_STATE_CONNECTED;
+	return rndis_indicate_status_msg(params, RNDIS_STATUS_MEDIA_CONNECT);
+}
+EXPORT_SYMBOL_GPL(rndis_signal_connect);
+
+int rndis_signal_disconnect(struct rndis_params *params)
+{
+	params->media_state = RNDIS_MEDIA_STATE_DISCONNECTED;
+	return rndis_indicate_status_msg(params, RNDIS_STATUS_MEDIA_DISCONNECT);
+}
+EXPORT_SYMBOL_GPL(rndis_signal_disconnect);
+
+void rndis_uninit(struct rndis_params *params)
+{
+	u8 *buf;
+	u32 length;
+
+	if (!params)
+		return;
+	params->state = RNDIS_UNINITIALIZED;
+
+	/* drain the response queue */
+	while ((buf = rndis_get_next_response(params, &length)))
+		rndis_free_response(params, buf);
+}
+EXPORT_SYMBOL_GPL(rndis_uninit);
+
+void rndis_set_host_mac(struct rndis_params *params, const u8 *addr)
+{
+	params->host_mac = addr;
+}
+EXPORT_SYMBOL_GPL(rndis_set_host_mac);
+
+/*
+ * Message Parser
+ */
+int rndis_msg_parser(struct rndis_params *params, u8 *buf)
+{
+	u32 MsgType, MsgLength;
+	__le32 *tmp;
+
+	if (!buf)
+		return -ENOMEM;
+
+	tmp = (__le32 *)buf;
+	MsgType   = get_unaligned_le32(tmp++);
+	MsgLength = get_unaligned_le32(tmp++);
+
+	if (!params)
+		return -ENOTSUPP;
+
+	/* NOTE: RNDIS is *EXTREMELY* chatty ... Windows constantly polls for
+	 * rx/tx statistics and link status, in addition to KEEPALIVE traffic
+	 * and normal HC level polling to see if there's any IN traffic.
+	 */
+
+	/* For USB: responses may take up to 10 seconds */
+	switch (MsgType) {
+	case RNDIS_MSG_INIT:
+		pr_debug("%s: RNDIS_MSG_INIT\n",
+			__func__);
+		params->state = RNDIS_INITIALIZED;
+		return rndis_init_response(params, (rndis_init_msg_type *)buf);
+
+	case RNDIS_MSG_HALT:
+		pr_debug("%s: RNDIS_MSG_HALT\n",
+			__func__);
+		params->state = RNDIS_UNINITIALIZED;
+		if (params->dev) {
+			netif_carrier_off(params->dev);
+			netif_stop_queue(params->dev);
+		}
+		return 0;
+
+	case RNDIS_MSG_QUERY:
+		return rndis_query_response(params,
+					(rndis_query_msg_type *)buf);
+
+	case RNDIS_MSG_SET:
+		return rndis_set_response(params, (rndis_set_msg_type *)buf);
+
+	case RNDIS_MSG_RESET:
+		pr_debug("%s: RNDIS_MSG_RESET\n",
+			__func__);
+		return rndis_reset_response(params,
+					(rndis_reset_msg_type *)buf);
+
+	case RNDIS_MSG_KEEPALIVE:
+		/* For USB: host does this every 5 seconds */
+		if (rndis_debug > 1)
+			pr_debug("%s: RNDIS_MSG_KEEPALIVE\n",
+				__func__);
+		return rndis_keepalive_response(params,
+						 (rndis_keepalive_msg_type *)
+						 buf);
+
+	default:
+		/* At least Windows XP emits some undefined RNDIS messages.
+		 * In one case those messages seemed to relate to the host
+		 * suspending itself.
+		 */
+		pr_warn("%s: unknown RNDIS message 0x%08X len %d\n",
+			__func__, MsgType, MsgLength);
+		/* Garbled message can be huge, so limit what we display */
+		if (MsgLength > 16)
+			MsgLength = 16;
+		print_hex_dump_bytes(__func__, DUMP_PREFIX_OFFSET,
+				     buf, MsgLength);
+		break;
+	}
+
+	return -ENOTSUPP;
+}
+EXPORT_SYMBOL_GPL(rndis_msg_parser);
+
+static inline int rndis_get_nr(void)
+{
+	return ida_simple_get(&rndis_ida, 0, 1000, GFP_KERNEL);
+}
+
+static inline void rndis_put_nr(int nr)
+{
+	ida_simple_remove(&rndis_ida, nr);
+}
+
+struct rndis_params *rndis_register(void (*resp_avail)(void *v), void *v)
+{
+	struct rndis_params *params;
+	int i;
+
+	if (!resp_avail)
+		return ERR_PTR(-EINVAL);
+
+	i = rndis_get_nr();
+	if (i < 0) {
+		pr_debug("failed\n");
+
+		return ERR_PTR(-ENODEV);
+	}
+
+	params = kzalloc(sizeof(*params), GFP_KERNEL);
+	if (!params) {
+		rndis_put_nr(i);
+
+		return ERR_PTR(-ENOMEM);
+	}
+
+#ifdef	CONFIG_USB_GADGET_DEBUG_FILES
+	{
+		struct proc_dir_entry *proc_entry;
+		char name[20];
+
+		sprintf(name, NAME_TEMPLATE, i);
+		proc_entry = proc_create_data(name, 0660, NULL,
+					      &rndis_proc_ops, params);
+		if (!proc_entry) {
+			kfree(params);
+			rndis_put_nr(i);
+
+			return ERR_PTR(-EIO);
+		}
+	}
+#endif
+
+	params->confignr = i;
+	params->used = 1;
+	params->state = RNDIS_UNINITIALIZED;
+	params->media_state = RNDIS_MEDIA_STATE_DISCONNECTED;
+	params->resp_avail = resp_avail;
+	params->v = v;
+	INIT_LIST_HEAD(&params->resp_queue);
+	spin_lock_init(&params->resp_lock);
+	pr_debug("%s: configNr = %d\n", __func__, i);
+
+	return params;
+}
+EXPORT_SYMBOL_GPL(rndis_register);
+
+void rndis_deregister(struct rndis_params *params)
+{
+	int i;
+
+	pr_debug("%s:\n", __func__);
+
+	if (!params)
+		return;
+
+	i = params->confignr;
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+	{
+		char name[20];
+
+		sprintf(name, NAME_TEMPLATE, i);
+		remove_proc_entry(name, NULL);
+	}
+#endif
+
+	kfree(params);
+	rndis_put_nr(i);
+}
+EXPORT_SYMBOL_GPL(rndis_deregister);
+int rndis_set_param_dev(struct rndis_params *params, struct net_device *dev,
+			u16 *cdc_filter)
+{
+	pr_debug("%s:\n", __func__);
+	if (!dev)
+		return -EINVAL;
+	if (!params)
+		return -1;
+
+	params->dev = dev;
+	params->filter = cdc_filter;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rndis_set_param_dev);
+
+int rndis_set_param_vendor(struct rndis_params *params, u32 vendorID,
+			   const char *vendorDescr)
+{
+	pr_debug("%s:\n", __func__);
+	if (!vendorDescr) return -1;
+	if (!params)
+		return -1;
+
+	params->vendorID = vendorID;
+	params->vendorDescr = vendorDescr;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rndis_set_param_vendor);
+
+int rndis_set_param_medium(struct rndis_params *params, u32 medium, u32 speed)
+{
+	pr_debug("%s: %u %u\n", __func__, medium, speed);
+	if (!params)
+		return -1;
+
+	params->medium = medium;
+	params->speed = speed;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rndis_set_param_medium);
+
+void rndis_add_hdr(struct sk_buff *skb)
+{
+	struct rndis_packet_msg_type *header;
+
+	if (!skb)
+		return;
+	header = skb_push(skb, sizeof(*header));
+	memset(header, 0, sizeof *header);
+	header->MessageType = cpu_to_le32(RNDIS_MSG_PACKET);
+	header->MessageLength = cpu_to_le32(skb->len);
+	header->DataOffset = cpu_to_le32(36);
+	header->DataLength = cpu_to_le32(skb->len - sizeof(*header));
+}
+EXPORT_SYMBOL_GPL(rndis_add_hdr);
+
+void rndis_free_response(struct rndis_params *params, u8 *buf)
+{
+	rndis_resp_t *r, *n;
+
+	spin_lock(&params->resp_lock);
+	list_for_each_entry_safe(r, n, &params->resp_queue, list) {
+		if (r->buf == buf) {
+			list_del(&r->list);
+			kfree(r);
+		}
+	}
+	spin_unlock(&params->resp_lock);
+}
+EXPORT_SYMBOL_GPL(rndis_free_response);
+
+u8 *rndis_get_next_response(struct rndis_params *params, u32 *length)
+{
+	rndis_resp_t *r, *n;
+
+	if (!length) return NULL;
+
+	spin_lock(&params->resp_lock);
+	list_for_each_entry_safe(r, n, &params->resp_queue, list) {
+		if (!r->send) {
+			r->send = 1;
+			*length = r->length;
+			spin_unlock(&params->resp_lock);
+			return r->buf;
+		}
+	}
+
+	spin_unlock(&params->resp_lock);
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(rndis_get_next_response);
+
+static rndis_resp_t *rndis_add_response(struct rndis_params *params, u32 length)
+{
+	rndis_resp_t *r;
+
+	/* NOTE: this gets copied into ether.c USB_BUFSIZ bytes ... */
+	r = kmalloc(sizeof(rndis_resp_t) + length, GFP_ATOMIC);
+	if (!r) return NULL;
+
+	r->buf = (u8 *)(r + 1);
+	r->length = length;
+	r->send = 0;
+
+	spin_lock(&params->resp_lock);
+	list_add_tail(&r->list, &params->resp_queue);
+	spin_unlock(&params->resp_lock);
+	return r;
+}
+
+int rndis_rm_hdr(struct gether *port,
+			struct sk_buff *skb,
+			struct sk_buff_head *list)
+{
+	/* tmp points to a struct rndis_packet_msg_type */
+	__le32 *tmp = (void *)skb->data;
+
+	/* MessageType, MessageLength */
+	if (cpu_to_le32(RNDIS_MSG_PACKET)
+			!= get_unaligned(tmp++)) {
+		dev_kfree_skb_any(skb);
+		return -EINVAL;
+	}
+	tmp++;
+
+	/* DataOffset, DataLength */
+	if (!skb_pull(skb, get_unaligned_le32(tmp++) + 8)) {
+		dev_kfree_skb_any(skb);
+		return -EOVERFLOW;
+	}
+	skb_trim(skb, get_unaligned_le32(tmp++));
+
+	skb_queue_tail(list, skb);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rndis_rm_hdr);
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static int rndis_proc_show(struct seq_file *m, void *v)
+{
+	rndis_params *param = m->private;
+
+	seq_printf(m,
+			 "Config Nr. %d\n"
+			 "used      : %s\n"
+			 "state     : %s\n"
+			 "medium    : 0x%08X\n"
+			 "speed     : %u\n"
+			 "cable     : %s\n"
+			 "vendor ID : 0x%08X\n"
+			 "vendor    : %s\n",
+			 param->confignr, (param->used) ? "y" : "n",
+			 ({ char *s = "?";
+			 switch (param->state) {
+			 case RNDIS_UNINITIALIZED:
+				s = "RNDIS_UNINITIALIZED"; break;
+			 case RNDIS_INITIALIZED:
+				s = "RNDIS_INITIALIZED"; break;
+			 case RNDIS_DATA_INITIALIZED:
+				s = "RNDIS_DATA_INITIALIZED"; break;
+			} s; }),
+			 param->medium,
+			 (param->media_state) ? 0 : param->speed*100,
+			 (param->media_state) ? "disconnected" : "connected",
+			 param->vendorID, param->vendorDescr);
+	return 0;
+}
+
+static ssize_t rndis_proc_write(struct file *file, const char __user *buffer,
+				size_t count, loff_t *ppos)
+{
+	rndis_params *p = pde_data(file_inode(file));
+	u32 speed = 0;
+	int i, fl_speed = 0;
+
+	for (i = 0; i < count; i++) {
+		char c;
+		if (get_user(c, buffer))
+			return -EFAULT;
+		switch (c) {
+		case '0':
+		case '1':
+		case '2':
+		case '3':
+		case '4':
+		case '5':
+		case '6':
+		case '7':
+		case '8':
+		case '9':
+			fl_speed = 1;
+			speed = speed * 10 + c - '0';
+			break;
+		case 'C':
+		case 'c':
+			rndis_signal_connect(p);
+			break;
+		case 'D':
+		case 'd':
+			rndis_signal_disconnect(p);
+			break;
+		default:
+			if (fl_speed) p->speed = speed;
+			else pr_debug("%c is not valid\n", c);
+			break;
+		}
+
+		buffer++;
+	}
+
+	return count;
+}
+
+static int rndis_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, rndis_proc_show, pde_data(inode));
+}
+
+static const struct proc_ops rndis_proc_ops = {
+	.proc_open	= rndis_proc_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_release	= single_release,
+	.proc_write	= rndis_proc_write,
+};
+
+#define	NAME_TEMPLATE "driver/rndis-%03d"
+
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
diff --git a/drivers/usb/gadget/function/rndis.h b/drivers/usb/gadget/function/rndis.h
new file mode 100644
index 000000000..6206b8b74
--- /dev/null
+++ b/drivers/usb/gadget/function/rndis.h
@@ -0,0 +1,202 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * RNDIS	Definitions for Remote NDIS
+ *
+ * Authors:	Benedikt Spranger, Pengutronix
+ *		Robert Schwebel, Pengutronix
+ *
+ *		This software was originally developed in conformance with
+ *		Microsoft's Remote NDIS Specification License Agreement.
+ */
+
+#ifndef _LINUX_RNDIS_H
+#define _LINUX_RNDIS_H
+
+#include <linux/rndis.h>
+#include "u_ether.h"
+#include "ndis.h"
+
+#define RNDIS_MAXIMUM_FRAME_SIZE	1518
+#define RNDIS_MAX_TOTAL_SIZE		1558
+
+typedef struct rndis_init_msg_type {
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+	__le32	MajorVersion;
+	__le32	MinorVersion;
+	__le32	MaxTransferSize;
+} rndis_init_msg_type;
+
+typedef struct rndis_init_cmplt_type {
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+	__le32	Status;
+	__le32	MajorVersion;
+	__le32	MinorVersion;
+	__le32	DeviceFlags;
+	__le32	Medium;
+	__le32	MaxPacketsPerTransfer;
+	__le32	MaxTransferSize;
+	__le32	PacketAlignmentFactor;
+	__le32	AFListOffset;
+	__le32	AFListSize;
+} rndis_init_cmplt_type;
+
+typedef struct rndis_halt_msg_type {
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+} rndis_halt_msg_type;
+
+typedef struct rndis_query_msg_type {
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+	__le32	OID;
+	__le32	InformationBufferLength;
+	__le32	InformationBufferOffset;
+	__le32	DeviceVcHandle;
+} rndis_query_msg_type;
+
+typedef struct rndis_query_cmplt_type {
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+	__le32	Status;
+	__le32	InformationBufferLength;
+	__le32	InformationBufferOffset;
+} rndis_query_cmplt_type;
+
+typedef struct rndis_set_msg_type {
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+	__le32	OID;
+	__le32	InformationBufferLength;
+	__le32	InformationBufferOffset;
+	__le32	DeviceVcHandle;
+} rndis_set_msg_type;
+
+typedef struct rndis_set_cmplt_type {
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+	__le32	Status;
+} rndis_set_cmplt_type;
+
+typedef struct rndis_reset_msg_type {
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	Reserved;
+} rndis_reset_msg_type;
+
+typedef struct rndis_reset_cmplt_type {
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	Status;
+	__le32	AddressingReset;
+} rndis_reset_cmplt_type;
+
+typedef struct rndis_indicate_status_msg_type {
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	Status;
+	__le32	StatusBufferLength;
+	__le32	StatusBufferOffset;
+} rndis_indicate_status_msg_type;
+
+typedef struct rndis_keepalive_msg_type {
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+} rndis_keepalive_msg_type;
+
+typedef struct rndis_keepalive_cmplt_type {
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+	__le32	Status;
+} rndis_keepalive_cmplt_type;
+
+struct rndis_packet_msg_type {
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	DataOffset;
+	__le32	DataLength;
+	__le32	OOBDataOffset;
+	__le32	OOBDataLength;
+	__le32	NumOOBDataElements;
+	__le32	PerPacketInfoOffset;
+	__le32	PerPacketInfoLength;
+	__le32	VcHandle;
+	__le32	Reserved;
+} __attribute__ ((packed));
+
+struct rndis_config_parameter {
+	__le32	ParameterNameOffset;
+	__le32	ParameterNameLength;
+	__le32	ParameterType;
+	__le32	ParameterValueOffset;
+	__le32	ParameterValueLength;
+};
+
+/* implementation specific */
+enum rndis_state {
+	RNDIS_UNINITIALIZED,
+	RNDIS_INITIALIZED,
+	RNDIS_DATA_INITIALIZED,
+};
+
+typedef struct rndis_resp_t {
+	struct list_head	list;
+	u8			*buf;
+	u32			length;
+	int			send;
+} rndis_resp_t;
+
+typedef struct rndis_params {
+	int			confignr;
+	u8			used;
+	u16			saved_filter;
+	enum rndis_state	state;
+	u32			medium;
+	u32			speed;
+	u32			media_state;
+
+	const u8		*host_mac;
+	u16			*filter;
+	struct net_device	*dev;
+
+	u32			vendorID;
+	const char		*vendorDescr;
+	void			(*resp_avail)(void *v);
+	void			*v;
+	struct list_head	resp_queue;
+	spinlock_t		resp_lock;
+} rndis_params;
+
+/* RNDIS Message parser and other useless functions */
+int  rndis_msg_parser(struct rndis_params *params, u8 *buf);
+struct rndis_params *rndis_register(void (*resp_avail)(void *v), void *v);
+void rndis_deregister(struct rndis_params *params);
+int  rndis_set_param_dev(struct rndis_params *params, struct net_device *dev,
+			 u16 *cdc_filter);
+int  rndis_set_param_vendor(struct rndis_params *params, u32 vendorID,
+			    const char *vendorDescr);
+int  rndis_set_param_medium(struct rndis_params *params, u32 medium,
+			     u32 speed);
+void rndis_add_hdr(struct sk_buff *skb);
+int rndis_rm_hdr(struct gether *port, struct sk_buff *skb,
+			struct sk_buff_head *list);
+u8   *rndis_get_next_response(struct rndis_params *params, u32 *length);
+void rndis_free_response(struct rndis_params *params, u8 *buf);
+
+void rndis_uninit(struct rndis_params *params);
+int  rndis_signal_connect(struct rndis_params *params);
+int  rndis_signal_disconnect(struct rndis_params *params);
+int  rndis_state(struct rndis_params *params);
+extern void rndis_set_host_mac(struct rndis_params *params, const u8 *addr);
+
+#endif  /* _LINUX_RNDIS_H */
diff --git a/drivers/usb/gadget/function/storage_common.c b/drivers/usb/gadget/function/storage_common.c
new file mode 100644
index 000000000..208c6a927
--- /dev/null
+++ b/drivers/usb/gadget/function/storage_common.c
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * storage_common.c -- Common definitions for mass storage functionality
+ *
+ * Copyright (C) 2003-2008 Alan Stern
+ * Copyeight (C) 2009 Samsung Electronics
+ * Author: Michal Nazarewicz (mina86@mina86.com)
+ */
+
+/*
+ * This file requires the following identifiers used in USB strings to
+ * be defined (each of type pointer to char):
+ *  - fsg_string_interface    -- name of the interface
+ */
+
+/*
+ * When USB_GADGET_DEBUG_FILES is defined the module param num_buffers
+ * sets the number of pipeline buffers (length of the fsg_buffhd array).
+ * The valid range of num_buffers is: num >= 2 && num <= 4.
+ */
+
+#include <linux/module.h>
+#include <linux/blkdev.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/usb/composite.h>
+
+#include "storage_common.h"
+
+/* There is only one interface. */
+
+struct usb_interface_descriptor fsg_intf_desc = {
+	.bLength =		sizeof fsg_intf_desc,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bNumEndpoints =	2,		/* Adjusted during fsg_bind() */
+	.bInterfaceClass =	USB_CLASS_MASS_STORAGE,
+	.bInterfaceSubClass =	USB_SC_SCSI,	/* Adjusted during fsg_bind() */
+	.bInterfaceProtocol =	USB_PR_BULK,	/* Adjusted during fsg_bind() */
+	.iInterface =		FSG_STRING_INTERFACE,
+};
+EXPORT_SYMBOL_GPL(fsg_intf_desc);
+
+/*
+ * Three full-speed endpoint descriptors: bulk-in, bulk-out, and
+ * interrupt-in.
+ */
+
+struct usb_endpoint_descriptor fsg_fs_bulk_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	/* wMaxPacketSize set by autoconfiguration */
+};
+EXPORT_SYMBOL_GPL(fsg_fs_bulk_in_desc);
+
+struct usb_endpoint_descriptor fsg_fs_bulk_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	/* wMaxPacketSize set by autoconfiguration */
+};
+EXPORT_SYMBOL_GPL(fsg_fs_bulk_out_desc);
+
+struct usb_descriptor_header *fsg_fs_function[] = {
+	(struct usb_descriptor_header *) &fsg_intf_desc,
+	(struct usb_descriptor_header *) &fsg_fs_bulk_in_desc,
+	(struct usb_descriptor_header *) &fsg_fs_bulk_out_desc,
+	NULL,
+};
+EXPORT_SYMBOL_GPL(fsg_fs_function);
+
+
+/*
+ * USB 2.0 devices need to expose both high speed and full speed
+ * descriptors, unless they only run at full speed.
+ *
+ * That means alternate endpoint descriptors (bigger packets).
+ */
+struct usb_endpoint_descriptor fsg_hs_bulk_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	/* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+EXPORT_SYMBOL_GPL(fsg_hs_bulk_in_desc);
+
+struct usb_endpoint_descriptor fsg_hs_bulk_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	/* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+	.bInterval =		1,	/* NAK every 1 uframe */
+};
+EXPORT_SYMBOL_GPL(fsg_hs_bulk_out_desc);
+
+
+struct usb_descriptor_header *fsg_hs_function[] = {
+	(struct usb_descriptor_header *) &fsg_intf_desc,
+	(struct usb_descriptor_header *) &fsg_hs_bulk_in_desc,
+	(struct usb_descriptor_header *) &fsg_hs_bulk_out_desc,
+	NULL,
+};
+EXPORT_SYMBOL_GPL(fsg_hs_function);
+
+struct usb_endpoint_descriptor fsg_ss_bulk_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	/* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+EXPORT_SYMBOL_GPL(fsg_ss_bulk_in_desc);
+
+struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = {
+	.bLength =		sizeof(fsg_ss_bulk_in_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/*.bMaxBurst =		DYNAMIC, */
+};
+EXPORT_SYMBOL_GPL(fsg_ss_bulk_in_comp_desc);
+
+struct usb_endpoint_descriptor fsg_ss_bulk_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	/* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+EXPORT_SYMBOL_GPL(fsg_ss_bulk_out_desc);
+
+struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = {
+	.bLength =		sizeof(fsg_ss_bulk_in_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/*.bMaxBurst =		DYNAMIC, */
+};
+EXPORT_SYMBOL_GPL(fsg_ss_bulk_out_comp_desc);
+
+struct usb_descriptor_header *fsg_ss_function[] = {
+	(struct usb_descriptor_header *) &fsg_intf_desc,
+	(struct usb_descriptor_header *) &fsg_ss_bulk_in_desc,
+	(struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc,
+	(struct usb_descriptor_header *) &fsg_ss_bulk_out_desc,
+	(struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc,
+	NULL,
+};
+EXPORT_SYMBOL_GPL(fsg_ss_function);
+
+
+ /*-------------------------------------------------------------------------*/
+
+/*
+ * If the next two routines are called while the gadget is registered,
+ * the caller must own fsg->filesem for writing.
+ */
+
+void fsg_lun_close(struct fsg_lun *curlun)
+{
+	if (curlun->filp) {
+		LDBG(curlun, "close backing file\n");
+		fput(curlun->filp);
+		curlun->filp = NULL;
+	}
+}
+EXPORT_SYMBOL_GPL(fsg_lun_close);
+
+int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
+{
+	int				ro;
+	struct file			*filp = NULL;
+	int				rc = -EINVAL;
+	struct inode			*inode = NULL;
+	loff_t				size;
+	loff_t				num_sectors;
+	loff_t				min_sectors;
+	unsigned int			blkbits;
+	unsigned int			blksize;
+
+	/* R/W if we can, R/O if we must */
+	ro = curlun->initially_ro;
+	if (!ro) {
+		filp = filp_open(filename, O_RDWR | O_LARGEFILE, 0);
+		if (PTR_ERR(filp) == -EROFS || PTR_ERR(filp) == -EACCES)
+			ro = 1;
+	}
+	if (ro)
+		filp = filp_open(filename, O_RDONLY | O_LARGEFILE, 0);
+	if (IS_ERR(filp)) {
+		LINFO(curlun, "unable to open backing file: %s\n", filename);
+		return PTR_ERR(filp);
+	}
+
+	if (!(filp->f_mode & FMODE_WRITE))
+		ro = 1;
+
+	inode = filp->f_mapping->host;
+	if ((!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))) {
+		LINFO(curlun, "invalid file type: %s\n", filename);
+		goto out;
+	}
+
+	/*
+	 * If we can't read the file, it's no good.
+	 * If we can't write the file, use it read-only.
+	 */
+	if (!(filp->f_mode & FMODE_CAN_READ)) {
+		LINFO(curlun, "file not readable: %s\n", filename);
+		goto out;
+	}
+	if (!(filp->f_mode & FMODE_CAN_WRITE))
+		ro = 1;
+
+	size = i_size_read(inode);
+	if (size < 0) {
+		LINFO(curlun, "unable to find file size: %s\n", filename);
+		rc = (int) size;
+		goto out;
+	}
+
+	if (curlun->cdrom) {
+		blksize = 2048;
+		blkbits = 11;
+	} else if (S_ISBLK(inode->i_mode)) {
+		blksize = bdev_logical_block_size(I_BDEV(inode));
+		blkbits = blksize_bits(blksize);
+	} else {
+		blksize = 512;
+		blkbits = 9;
+	}
+
+	num_sectors = size >> blkbits; /* File size in logic-block-size blocks */
+	min_sectors = 1;
+	if (curlun->cdrom) {
+		min_sectors = 300;	/* Smallest track is 300 frames */
+		if (num_sectors >= 256*60*75) {
+			num_sectors = 256*60*75 - 1;
+			LINFO(curlun, "file too big: %s\n", filename);
+			LINFO(curlun, "using only first %d blocks\n",
+					(int) num_sectors);
+		}
+	}
+	if (num_sectors < min_sectors) {
+		LINFO(curlun, "file too small: %s\n", filename);
+		rc = -ETOOSMALL;
+		goto out;
+	}
+
+	if (fsg_lun_is_open(curlun))
+		fsg_lun_close(curlun);
+
+	curlun->blksize = blksize;
+	curlun->blkbits = blkbits;
+	curlun->ro = ro;
+	curlun->filp = filp;
+	curlun->file_length = size;
+	curlun->num_sectors = num_sectors;
+	LDBG(curlun, "open backing file: %s\n", filename);
+	return 0;
+
+out:
+	fput(filp);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(fsg_lun_open);
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Sync the file data, don't bother with the metadata.
+ * This code was copied from fs/buffer.c:sys_fdatasync().
+ */
+int fsg_lun_fsync_sub(struct fsg_lun *curlun)
+{
+	struct file	*filp = curlun->filp;
+
+	if (curlun->ro || !filp)
+		return 0;
+	return vfs_fsync(filp, 1);
+}
+EXPORT_SYMBOL_GPL(fsg_lun_fsync_sub);
+
+void store_cdrom_address(u8 *dest, int msf, u32 addr)
+{
+	if (msf) {
+		/*
+		 * Convert to Minutes-Seconds-Frames.
+		 * Sector size is already set to 2048 bytes.
+		 */
+		addr += 2*75;		/* Lead-in occupies 2 seconds */
+		dest[3] = addr % 75;	/* Frames */
+		addr /= 75;
+		dest[2] = addr % 60;	/* Seconds */
+		addr /= 60;
+		dest[1] = addr;		/* Minutes */
+		dest[0] = 0;		/* Reserved */
+	} else {
+		/* Absolute sector */
+		put_unaligned_be32(addr, dest);
+	}
+}
+EXPORT_SYMBOL_GPL(store_cdrom_address);
+
+/*-------------------------------------------------------------------------*/
+
+
+ssize_t fsg_show_ro(struct fsg_lun *curlun, char *buf)
+{
+	return sprintf(buf, "%d\n", fsg_lun_is_open(curlun)
+				  ? curlun->ro
+				  : curlun->initially_ro);
+}
+EXPORT_SYMBOL_GPL(fsg_show_ro);
+
+ssize_t fsg_show_nofua(struct fsg_lun *curlun, char *buf)
+{
+	return sprintf(buf, "%u\n", curlun->nofua);
+}
+EXPORT_SYMBOL_GPL(fsg_show_nofua);
+
+ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		      char *buf)
+{
+	char		*p;
+	ssize_t		rc;
+
+	down_read(filesem);
+	if (fsg_lun_is_open(curlun)) {	/* Get the complete pathname */
+		p = file_path(curlun->filp, buf, PAGE_SIZE - 1);
+		if (IS_ERR(p))
+			rc = PTR_ERR(p);
+		else {
+			rc = strlen(p);
+			memmove(buf, p, rc);
+			buf[rc] = '\n';		/* Add a newline */
+			buf[++rc] = 0;
+		}
+	} else {				/* No file, return 0 bytes */
+		*buf = 0;
+		rc = 0;
+	}
+	up_read(filesem);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(fsg_show_file);
+
+ssize_t fsg_show_cdrom(struct fsg_lun *curlun, char *buf)
+{
+	return sprintf(buf, "%u\n", curlun->cdrom);
+}
+EXPORT_SYMBOL_GPL(fsg_show_cdrom);
+
+ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf)
+{
+	return sprintf(buf, "%u\n", curlun->removable);
+}
+EXPORT_SYMBOL_GPL(fsg_show_removable);
+
+ssize_t fsg_show_inquiry_string(struct fsg_lun *curlun, char *buf)
+{
+	return sprintf(buf, "%s\n", curlun->inquiry_string);
+}
+EXPORT_SYMBOL_GPL(fsg_show_inquiry_string);
+
+/*
+ * The caller must hold fsg->filesem for reading when calling this function.
+ */
+static ssize_t _fsg_store_ro(struct fsg_lun *curlun, bool ro)
+{
+	if (fsg_lun_is_open(curlun)) {
+		LDBG(curlun, "read-only status change prevented\n");
+		return -EBUSY;
+	}
+
+	curlun->ro = ro;
+	curlun->initially_ro = ro;
+	LDBG(curlun, "read-only status set to %d\n", curlun->ro);
+
+	return 0;
+}
+
+ssize_t fsg_store_ro(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		     const char *buf, size_t count)
+{
+	ssize_t		rc;
+	bool		ro;
+
+	rc = strtobool(buf, &ro);
+	if (rc)
+		return rc;
+
+	/*
+	 * Allow the write-enable status to change only while the
+	 * backing file is closed.
+	 */
+	down_read(filesem);
+	rc = _fsg_store_ro(curlun, ro);
+	if (!rc)
+		rc = count;
+	up_read(filesem);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(fsg_store_ro);
+
+ssize_t fsg_store_nofua(struct fsg_lun *curlun, const char *buf, size_t count)
+{
+	bool		nofua;
+	int		ret;
+
+	ret = strtobool(buf, &nofua);
+	if (ret)
+		return ret;
+
+	/* Sync data when switching from async mode to sync */
+	if (!nofua && curlun->nofua)
+		fsg_lun_fsync_sub(curlun);
+
+	curlun->nofua = nofua;
+
+	return count;
+}
+EXPORT_SYMBOL_GPL(fsg_store_nofua);
+
+ssize_t fsg_store_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		       const char *buf, size_t count)
+{
+	int		rc = 0;
+
+	if (curlun->prevent_medium_removal && fsg_lun_is_open(curlun)) {
+		LDBG(curlun, "eject attempt prevented\n");
+		return -EBUSY;				/* "Door is locked" */
+	}
+
+	/* Remove a trailing newline */
+	if (count > 0 && buf[count-1] == '\n')
+		((char *) buf)[count-1] = 0;		/* Ugh! */
+
+	/* Load new medium */
+	down_write(filesem);
+	if (count > 0 && buf[0]) {
+		/* fsg_lun_open() will close existing file if any. */
+		rc = fsg_lun_open(curlun, buf);
+		if (rc == 0)
+			curlun->unit_attention_data =
+					SS_NOT_READY_TO_READY_TRANSITION;
+	} else if (fsg_lun_is_open(curlun)) {
+		fsg_lun_close(curlun);
+		curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
+	}
+	up_write(filesem);
+	return (rc < 0 ? rc : count);
+}
+EXPORT_SYMBOL_GPL(fsg_store_file);
+
+ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+			const char *buf, size_t count)
+{
+	bool		cdrom;
+	int		ret;
+
+	ret = strtobool(buf, &cdrom);
+	if (ret)
+		return ret;
+
+	down_read(filesem);
+	ret = cdrom ? _fsg_store_ro(curlun, true) : 0;
+
+	if (!ret) {
+		curlun->cdrom = cdrom;
+		ret = count;
+	}
+	up_read(filesem);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(fsg_store_cdrom);
+
+ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf,
+			    size_t count)
+{
+	bool		removable;
+	int		ret;
+
+	ret = strtobool(buf, &removable);
+	if (ret)
+		return ret;
+
+	curlun->removable = removable;
+
+	return count;
+}
+EXPORT_SYMBOL_GPL(fsg_store_removable);
+
+ssize_t fsg_store_inquiry_string(struct fsg_lun *curlun, const char *buf,
+				 size_t count)
+{
+	const size_t len = min(count, sizeof(curlun->inquiry_string));
+
+	if (len == 0 || buf[0] == '\n') {
+		curlun->inquiry_string[0] = 0;
+	} else {
+		snprintf(curlun->inquiry_string,
+			 sizeof(curlun->inquiry_string), "%-28s", buf);
+		if (curlun->inquiry_string[len-1] == '\n')
+			curlun->inquiry_string[len-1] = ' ';
+	}
+
+	return count;
+}
+EXPORT_SYMBOL_GPL(fsg_store_inquiry_string);
+
+ssize_t fsg_store_forced_eject(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+			       const char *buf, size_t count)
+{
+	int ret;
+
+	/*
+	 * Forcibly detach the backing file from the LUN
+	 * regardless of whether the host has allowed it.
+	 */
+	curlun->prevent_medium_removal = 0;
+	ret = fsg_store_file(curlun, filesem, "", 0);
+	return ret < 0 ? ret : count;
+}
+EXPORT_SYMBOL_GPL(fsg_store_forced_eject);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/function/storage_common.h b/drivers/usb/gadget/function/storage_common.h
new file mode 100644
index 000000000..0a544a82c
--- /dev/null
+++ b/drivers/usb/gadget/function/storage_common.h
@@ -0,0 +1,225 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef USB_STORAGE_COMMON_H
+#define USB_STORAGE_COMMON_H
+
+#include <linux/device.h>
+#include <linux/usb/storage.h>
+#include <scsi/scsi.h>
+#include <asm/unaligned.h>
+
+#ifndef DEBUG
+#undef VERBOSE_DEBUG
+#undef DUMP_MSGS
+#endif /* !DEBUG */
+
+#ifdef VERBOSE_DEBUG
+#define VLDBG	LDBG
+#else
+#define VLDBG(lun, fmt, args...) do { } while (0)
+#endif /* VERBOSE_DEBUG */
+
+#define _LMSG(func, lun, fmt, args...)					\
+	do {								\
+		if ((lun)->name_pfx && *(lun)->name_pfx)		\
+			func("%s/%s: " fmt, *(lun)->name_pfx,		\
+				 (lun)->name, ## args);			\
+		else							\
+			func("%s: " fmt, (lun)->name, ## args);		\
+	} while (0)
+
+#define LDBG(lun, fmt, args...)		_LMSG(pr_debug, lun, fmt, ## args)
+#define LERROR(lun, fmt, args...)	_LMSG(pr_err, lun, fmt, ## args)
+#define LWARN(lun, fmt, args...)	_LMSG(pr_warn, lun, fmt, ## args)
+#define LINFO(lun, fmt, args...)	_LMSG(pr_info, lun, fmt, ## args)
+
+
+#ifdef DUMP_MSGS
+
+#  define dump_msg(fsg, /* const char * */ label,			\
+		   /* const u8 * */ buf, /* unsigned */ length)		\
+do {									\
+	if (length < 512) {						\
+		DBG(fsg, "%s, length %u:\n", label, length);		\
+		print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,	\
+			       16, 1, buf, length, 0);			\
+	}								\
+} while (0)
+
+#  define dump_cdb(fsg) do { } while (0)
+
+#else
+
+#  define dump_msg(fsg, /* const char * */ label, \
+		   /* const u8 * */ buf, /* unsigned */ length) do { } while (0)
+
+#  ifdef VERBOSE_DEBUG
+
+#    define dump_cdb(fsg)						\
+	print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE,	\
+		       16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0)		\
+
+#  else
+
+#    define dump_cdb(fsg) do { } while (0)
+
+#  endif /* VERBOSE_DEBUG */
+
+#endif /* DUMP_MSGS */
+
+/* Length of a SCSI Command Data Block */
+#define MAX_COMMAND_SIZE	16
+
+/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */
+#define SS_NO_SENSE				0
+#define SS_COMMUNICATION_FAILURE		0x040800
+#define SS_INVALID_COMMAND			0x052000
+#define SS_INVALID_FIELD_IN_CDB			0x052400
+#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE	0x052100
+#define SS_LOGICAL_UNIT_NOT_SUPPORTED		0x052500
+#define SS_MEDIUM_NOT_PRESENT			0x023a00
+#define SS_MEDIUM_REMOVAL_PREVENTED		0x055302
+#define SS_NOT_READY_TO_READY_TRANSITION	0x062800
+#define SS_RESET_OCCURRED			0x062900
+#define SS_SAVING_PARAMETERS_NOT_SUPPORTED	0x053900
+#define SS_UNRECOVERED_READ_ERROR		0x031100
+#define SS_WRITE_ERROR				0x030c02
+#define SS_WRITE_PROTECTED			0x072700
+
+#define SK(x)		((u8) ((x) >> 16))	/* Sense Key byte, etc. */
+#define ASC(x)		((u8) ((x) >> 8))
+#define ASCQ(x)		((u8) (x))
+
+/*
+ * Vendor (8 chars), product (16 chars), release (4 hexadecimal digits) and NUL
+ * byte
+ */
+#define INQUIRY_STRING_LEN ((size_t) (8 + 16 + 4 + 1))
+
+struct fsg_lun {
+	struct file	*filp;
+	loff_t		file_length;
+	loff_t		num_sectors;
+
+	unsigned int	initially_ro:1;
+	unsigned int	ro:1;
+	unsigned int	removable:1;
+	unsigned int	cdrom:1;
+	unsigned int	prevent_medium_removal:1;
+	unsigned int	registered:1;
+	unsigned int	info_valid:1;
+	unsigned int	nofua:1;
+
+	u32		sense_data;
+	u32		sense_data_info;
+	u32		unit_attention_data;
+
+	unsigned int	blkbits; /* Bits of logical block size
+						       of bound block device */
+	unsigned int	blksize; /* logical block size of bound block device */
+	struct device	dev;
+	const char	*name;		/* "lun.name" */
+	const char	**name_pfx;	/* "function.name" */
+	char		inquiry_string[INQUIRY_STRING_LEN];
+};
+
+static inline bool fsg_lun_is_open(struct fsg_lun *curlun)
+{
+	return curlun->filp != NULL;
+}
+
+/* Default size of buffer length. */
+#define FSG_BUFLEN	((u32)16384)
+
+/* Maximal number of LUNs supported in mass storage function */
+#define FSG_MAX_LUNS	16
+
+enum fsg_buffer_state {
+	BUF_STATE_SENDING = -2,
+	BUF_STATE_RECEIVING,
+	BUF_STATE_EMPTY = 0,
+	BUF_STATE_FULL
+};
+
+struct fsg_buffhd {
+	void				*buf;
+	enum fsg_buffer_state		state;
+	struct fsg_buffhd		*next;
+
+	/*
+	 * The NetChip 2280 is faster, and handles some protocol faults
+	 * better, if we don't submit any short bulk-out read requests.
+	 * So we will record the intended request length here.
+	 */
+	unsigned int			bulk_out_intended_length;
+
+	struct usb_request		*inreq;
+	struct usb_request		*outreq;
+};
+
+enum fsg_state {
+	FSG_STATE_NORMAL,
+	FSG_STATE_ABORT_BULK_OUT,
+	FSG_STATE_PROTOCOL_RESET,
+	FSG_STATE_CONFIG_CHANGE,
+	FSG_STATE_EXIT,
+	FSG_STATE_TERMINATED
+};
+
+enum data_direction {
+	DATA_DIR_UNKNOWN = 0,
+	DATA_DIR_FROM_HOST,
+	DATA_DIR_TO_HOST,
+	DATA_DIR_NONE
+};
+
+static inline struct fsg_lun *fsg_lun_from_dev(struct device *dev)
+{
+	return container_of(dev, struct fsg_lun, dev);
+}
+
+enum {
+	FSG_STRING_INTERFACE
+};
+
+extern struct usb_interface_descriptor fsg_intf_desc;
+
+extern struct usb_endpoint_descriptor fsg_fs_bulk_in_desc;
+extern struct usb_endpoint_descriptor fsg_fs_bulk_out_desc;
+extern struct usb_descriptor_header *fsg_fs_function[];
+
+extern struct usb_endpoint_descriptor fsg_hs_bulk_in_desc;
+extern struct usb_endpoint_descriptor fsg_hs_bulk_out_desc;
+extern struct usb_descriptor_header *fsg_hs_function[];
+
+extern struct usb_endpoint_descriptor fsg_ss_bulk_in_desc;
+extern struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc;
+extern struct usb_endpoint_descriptor fsg_ss_bulk_out_desc;
+extern struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc;
+extern struct usb_descriptor_header *fsg_ss_function[];
+
+void fsg_lun_close(struct fsg_lun *curlun);
+int fsg_lun_open(struct fsg_lun *curlun, const char *filename);
+int fsg_lun_fsync_sub(struct fsg_lun *curlun);
+void store_cdrom_address(u8 *dest, int msf, u32 addr);
+ssize_t fsg_show_ro(struct fsg_lun *curlun, char *buf);
+ssize_t fsg_show_nofua(struct fsg_lun *curlun, char *buf);
+ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		      char *buf);
+ssize_t fsg_show_inquiry_string(struct fsg_lun *curlun, char *buf);
+ssize_t fsg_show_cdrom(struct fsg_lun *curlun, char *buf);
+ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf);
+ssize_t fsg_store_ro(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		     const char *buf, size_t count);
+ssize_t fsg_store_nofua(struct fsg_lun *curlun, const char *buf, size_t count);
+ssize_t fsg_store_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		       const char *buf, size_t count);
+ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+			const char *buf, size_t count);
+ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf,
+			    size_t count);
+ssize_t fsg_store_inquiry_string(struct fsg_lun *curlun, const char *buf,
+				 size_t count);
+ssize_t fsg_store_forced_eject(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+			       const char *buf, size_t count);
+
+#endif /* USB_STORAGE_COMMON_H */
diff --git a/drivers/usb/gadget/function/tcm.h b/drivers/usb/gadget/function/tcm.h
new file mode 100644
index 000000000..3cd565794
--- /dev/null
+++ b/drivers/usb/gadget/function/tcm.h
@@ -0,0 +1,135 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __TARGET_USB_GADGET_H__
+#define __TARGET_USB_GADGET_H__
+
+#include <linux/kref.h>
+/* #include <linux/usb/uas.h> */
+#include <linux/usb/composite.h>
+#include <linux/usb/uas.h>
+#include <linux/usb/storage.h>
+#include <target/target_core_base.h>
+#include <target/target_core_fabric.h>
+
+#define USBG_NAMELEN 32
+
+#define fuas_to_gadget(f)	(f->function.config->cdev->gadget)
+#define UASP_SS_EP_COMP_LOG_STREAMS 4
+#define UASP_SS_EP_COMP_NUM_STREAMS (1 << UASP_SS_EP_COMP_LOG_STREAMS)
+
+enum {
+	USB_G_STR_INT_UAS = 0,
+	USB_G_STR_INT_BBB,
+};
+
+#define USB_G_ALT_INT_BBB       0
+#define USB_G_ALT_INT_UAS       1
+
+#define USB_G_DEFAULT_SESSION_TAGS	128
+
+struct tcm_usbg_nexus {
+	struct se_session *tvn_se_sess;
+};
+
+struct usbg_tpg {
+	struct mutex tpg_mutex;
+	/* SAS port target portal group tag for TCM */
+	u16 tport_tpgt;
+	/* Pointer back to usbg_tport */
+	struct usbg_tport *tport;
+	struct workqueue_struct *workqueue;
+	/* Returned by usbg_make_tpg() */
+	struct se_portal_group se_tpg;
+	u32 gadget_connect;
+	struct tcm_usbg_nexus *tpg_nexus;
+	atomic_t tpg_port_count;
+
+	struct usb_function_instance *fi;
+};
+
+struct usbg_tport {
+	/* Binary World Wide unique Port Name for SAS Target port */
+	u64 tport_wwpn;
+	/* ASCII formatted WWPN for SAS Target port */
+	char tport_name[USBG_NAMELEN];
+	/* Returned by usbg_make_tport() */
+	struct se_wwn tport_wwn;
+};
+
+enum uas_state {
+	UASP_SEND_DATA,
+	UASP_RECEIVE_DATA,
+	UASP_SEND_STATUS,
+	UASP_QUEUE_COMMAND,
+};
+
+#define USBG_MAX_CMD    64
+struct usbg_cmd {
+	/* common */
+	u8 cmd_buf[USBG_MAX_CMD];
+	u32 data_len;
+	struct work_struct work;
+	int unpacked_lun;
+	struct se_cmd se_cmd;
+	void *data_buf; /* used if no sg support available */
+	struct f_uas *fu;
+	struct completion write_complete;
+	struct kref ref;
+
+	/* UAS only */
+	u16 tag;
+	u16 prio_attr;
+	struct sense_iu sense_iu;
+	enum uas_state state;
+	struct uas_stream *stream;
+
+	/* BOT only */
+	__le32 bot_tag;
+	unsigned int csw_code;
+	unsigned is_read:1;
+
+};
+
+struct uas_stream {
+	struct usb_request	*req_in;
+	struct usb_request	*req_out;
+	struct usb_request	*req_status;
+};
+
+struct usbg_cdb {
+	struct usb_request	*req;
+	void			*buf;
+};
+
+struct bot_status {
+	struct usb_request	*req;
+	struct bulk_cs_wrap	csw;
+};
+
+struct f_uas {
+	struct usbg_tpg		*tpg;
+	struct usb_function	function;
+	u16			iface;
+
+	u32			flags;
+#define USBG_ENABLED		(1 << 0)
+#define USBG_IS_UAS		(1 << 1)
+#define USBG_USE_STREAMS	(1 << 2)
+#define USBG_IS_BOT		(1 << 3)
+#define USBG_BOT_CMD_PEND	(1 << 4)
+
+	struct usbg_cdb		cmd;
+	struct usb_ep		*ep_in;
+	struct usb_ep		*ep_out;
+
+	/* UAS */
+	struct usb_ep		*ep_status;
+	struct usb_ep		*ep_cmd;
+	struct uas_stream	stream[UASP_SS_EP_COMP_NUM_STREAMS];
+
+	/* BOT */
+	struct bot_status	bot_status;
+	struct usb_request	*bot_req_in;
+	struct usb_request	*bot_req_out;
+};
+
+#endif /* __TARGET_USB_GADGET_H__ */
diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
new file mode 100644
index 000000000..4a42574b4
--- /dev/null
+++ b/drivers/usb/gadget/function/u_audio.c
@@ -0,0 +1,1437 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * u_audio.c -- interface to USB gadget "ALSA sound card" utilities
+ *
+ * Copyright (C) 2016
+ * Author: Ruslan Bilovol <ruslan.bilovol@gmail.com>
+ *
+ * Sound card implementation was cut-and-pasted with changes
+ * from f_uac2.c and has:
+ *    Copyright (C) 2011
+ *    Yadwinder Singh (yadi.brar01@gmail.com)
+ *    Jaswinder Singh (jaswinder.singh@linaro.org)
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+#include <linux/usb/audio.h>
+
+#include "u_audio.h"
+
+#define BUFF_SIZE_MAX	(PAGE_SIZE * 16)
+#define PRD_SIZE_MAX	PAGE_SIZE
+#define MIN_PERIODS	4
+
+enum {
+	UAC_FBACK_CTRL,
+	UAC_P_PITCH_CTRL,
+	UAC_MUTE_CTRL,
+	UAC_VOLUME_CTRL,
+	UAC_RATE_CTRL,
+};
+
+/* Runtime data params for one stream */
+struct uac_rtd_params {
+	struct snd_uac_chip *uac; /* parent chip */
+	bool ep_enabled; /* if the ep is enabled */
+
+	struct snd_pcm_substream *ss;
+
+	/* Ring buffer */
+	ssize_t hw_ptr;
+
+	void *rbuf;
+
+	unsigned int pitch;	/* Stream pitch ratio to 1000000 */
+	unsigned int max_psize;	/* MaxPacketSize of endpoint */
+
+	struct usb_request **reqs;
+
+	struct usb_request *req_fback; /* Feedback endpoint request */
+	bool fb_ep_enabled; /* if the ep is enabled */
+
+  /* Volume/Mute controls and their state */
+  int fu_id; /* Feature Unit ID */
+  struct snd_kcontrol *snd_kctl_volume;
+  struct snd_kcontrol *snd_kctl_mute;
+  s16 volume_min, volume_max, volume_res;
+  s16 volume;
+  int mute;
+
+	struct snd_kcontrol *snd_kctl_rate; /* read-only current rate */
+	int srate; /* selected samplerate */
+	int active; /* playback/capture running */
+
+  spinlock_t lock; /* lock for control transfers */
+
+};
+
+struct snd_uac_chip {
+	struct g_audio *audio_dev;
+
+	struct uac_rtd_params p_prm;
+	struct uac_rtd_params c_prm;
+
+	struct snd_card *card;
+	struct snd_pcm *pcm;
+
+	/* pre-calculated values for playback iso completion */
+	unsigned long long p_residue_mil;
+	unsigned int p_interval;
+	unsigned int p_framesize;
+};
+
+static const struct snd_pcm_hardware uac_pcm_hardware = {
+	.info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER
+		 | SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID
+		 | SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME,
+	.rates = SNDRV_PCM_RATE_CONTINUOUS,
+	.periods_max = BUFF_SIZE_MAX / PRD_SIZE_MAX,
+	.buffer_bytes_max = BUFF_SIZE_MAX,
+	.period_bytes_max = PRD_SIZE_MAX,
+	.periods_min = MIN_PERIODS,
+};
+
+static void u_audio_set_fback_frequency(enum usb_device_speed speed,
+					struct usb_ep *out_ep,
+					unsigned long long freq,
+					unsigned int pitch,
+					void *buf)
+{
+	u32 ff = 0;
+	const struct usb_endpoint_descriptor *ep_desc;
+
+	/*
+	 * Because the pitch base is 1000000, the final divider here
+	 * will be 1000 * 1000000 = 1953125 << 9
+	 *
+	 * Instead of dealing with big numbers lets fold this 9 left shift
+	 */
+
+	if (speed == USB_SPEED_FULL) {
+		/*
+		 * Full-speed feedback endpoints report frequency
+		 * in samples/frame
+		 * Format is encoded in Q10.10 left-justified in the 24 bits,
+		 * so that it has a Q10.14 format.
+		 *
+		 * ff = (freq << 14) / 1000
+		 */
+		freq <<= 5;
+	} else {
+		/*
+		 * High-speed feedback endpoints report frequency
+		 * in samples/microframe.
+		 * Format is encoded in Q12.13 fitted into four bytes so that
+		 * the binary point is located between the second and the third
+		 * byte fromat (that is Q16.16)
+		 *
+		 * ff = (freq << 16) / 8000
+		 *
+		 * Win10 and OSX UAC2 drivers require number of samples per packet
+		 * in order to honor the feedback value.
+		 * Linux snd-usb-audio detects the applied bit-shift automatically.
+		 */
+		ep_desc = out_ep->desc;
+		freq <<= 4 + (ep_desc->bInterval - 1);
+	}
+
+	ff = DIV_ROUND_CLOSEST_ULL((freq * pitch), 1953125);
+
+	*(__le32 *)buf = cpu_to_le32(ff);
+}
+
+static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	unsigned int pending;
+	unsigned int hw_ptr;
+	int status = req->status;
+	struct snd_pcm_substream *substream;
+	struct snd_pcm_runtime *runtime;
+	struct uac_rtd_params *prm = req->context;
+	struct snd_uac_chip *uac = prm->uac;
+	unsigned int frames, p_pktsize;
+	unsigned long long pitched_rate_mil, p_pktsize_residue_mil,
+			residue_frames_mil, div_result;
+
+	/* i/f shutting down */
+	if (!prm->ep_enabled) {
+		usb_ep_free_request(ep, req);
+		return;
+	}
+
+	if (req->status == -ESHUTDOWN)
+		return;
+
+	/*
+	 * We can't really do much about bad xfers.
+	 * Afterall, the ISOCH xfers could fail legitimately.
+	 */
+	if (status)
+		pr_debug("%s: iso_complete status(%d) %d/%d\n",
+			__func__, status, req->actual, req->length);
+
+	substream = prm->ss;
+
+	/* Do nothing if ALSA isn't active */
+	if (!substream)
+		goto exit;
+
+	snd_pcm_stream_lock(substream);
+
+	runtime = substream->runtime;
+	if (!runtime || !snd_pcm_running(substream)) {
+		snd_pcm_stream_unlock(substream);
+		goto exit;
+	}
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		/*
+		 * For each IN packet, take the quotient of the current data
+		 * rate and the endpoint's interval as the base packet size.
+		 * If there is a residue from this division, add it to the
+		 * residue accumulator.
+		 */
+		unsigned long long p_interval_mil = uac->p_interval * 1000000ULL;
+
+		pitched_rate_mil = (unsigned long long) prm->srate * prm->pitch;
+		div_result = pitched_rate_mil;
+		do_div(div_result, uac->p_interval);
+		do_div(div_result, 1000000);
+		frames = (unsigned int) div_result;
+
+		pr_debug("p_srate %d, pitch %d, interval_mil %llu, frames %d\n",
+				prm->srate, prm->pitch, p_interval_mil, frames);
+
+		p_pktsize = min_t(unsigned int,
+					uac->p_framesize * frames,
+					ep->maxpacket);
+
+		if (p_pktsize < ep->maxpacket) {
+			residue_frames_mil = pitched_rate_mil - frames * p_interval_mil;
+			p_pktsize_residue_mil = uac->p_framesize * residue_frames_mil;
+		} else
+			p_pktsize_residue_mil = 0;
+
+		req->length = p_pktsize;
+		uac->p_residue_mil += p_pktsize_residue_mil;
+
+		/*
+		 * Whenever there are more bytes in the accumulator p_residue_mil than we
+		 * need to add one more sample frame, increase this packet's
+		 * size and decrease the accumulator.
+		 */
+		div_result = uac->p_residue_mil;
+		do_div(div_result, uac->p_interval);
+		do_div(div_result, 1000000);
+		if ((unsigned int) div_result >= uac->p_framesize) {
+			req->length += uac->p_framesize;
+			uac->p_residue_mil -= uac->p_framesize * p_interval_mil;
+			pr_debug("increased req length to %d\n", req->length);
+		}
+		pr_debug("remains uac->p_residue_mil %llu\n", uac->p_residue_mil);
+
+		req->actual = req->length;
+	}
+
+	hw_ptr = prm->hw_ptr;
+
+	/* Pack USB load in ALSA ring buffer */
+	pending = runtime->dma_bytes - hw_ptr;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		if (unlikely(pending < req->actual)) {
+			memcpy(req->buf, runtime->dma_area + hw_ptr, pending);
+			memcpy(req->buf + pending, runtime->dma_area,
+			       req->actual - pending);
+		} else {
+			memcpy(req->buf, runtime->dma_area + hw_ptr,
+			       req->actual);
+		}
+	} else {
+		if (unlikely(pending < req->actual)) {
+			memcpy(runtime->dma_area + hw_ptr, req->buf, pending);
+			memcpy(runtime->dma_area, req->buf + pending,
+			       req->actual - pending);
+		} else {
+			memcpy(runtime->dma_area + hw_ptr, req->buf,
+			       req->actual);
+		}
+	}
+
+	/* update hw_ptr after data is copied to memory */
+	prm->hw_ptr = (hw_ptr + req->actual) % runtime->dma_bytes;
+	hw_ptr = prm->hw_ptr;
+	snd_pcm_stream_unlock(substream);
+
+	if ((hw_ptr % snd_pcm_lib_period_bytes(substream)) < req->actual)
+		snd_pcm_period_elapsed(substream);
+
+exit:
+	if (usb_ep_queue(ep, req, GFP_ATOMIC))
+		dev_err(uac->card->dev, "%d Error!\n", __LINE__);
+}
+
+static void u_audio_iso_fback_complete(struct usb_ep *ep,
+				       struct usb_request *req)
+{
+	struct uac_rtd_params *prm = req->context;
+	struct snd_uac_chip *uac = prm->uac;
+	struct g_audio *audio_dev = uac->audio_dev;
+	int status = req->status;
+
+	/* i/f shutting down */
+	if (!prm->fb_ep_enabled) {
+		kfree(req->buf);
+		usb_ep_free_request(ep, req);
+		return;
+	}
+
+	if (req->status == -ESHUTDOWN)
+		return;
+
+	/*
+	 * We can't really do much about bad xfers.
+	 * Afterall, the ISOCH xfers could fail legitimately.
+	 */
+	if (status)
+		pr_debug("%s: iso_complete status(%d) %d/%d\n",
+			__func__, status, req->actual, req->length);
+
+	u_audio_set_fback_frequency(audio_dev->gadget->speed, audio_dev->out_ep,
+				    prm->srate, prm->pitch,
+				    req->buf);
+
+	if (usb_ep_queue(ep, req, GFP_ATOMIC))
+		dev_err(uac->card->dev, "%d Error!\n", __LINE__);
+}
+
+static int uac_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_uac_chip *uac = snd_pcm_substream_chip(substream);
+	struct uac_rtd_params *prm;
+	struct g_audio *audio_dev;
+	struct uac_params *params;
+	int err = 0;
+
+	audio_dev = uac->audio_dev;
+	params = &audio_dev->params;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		prm = &uac->p_prm;
+	else
+		prm = &uac->c_prm;
+
+	/* Reset */
+	prm->hw_ptr = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+		prm->ss = substream;
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		prm->ss = NULL;
+		break;
+	default:
+		err = -EINVAL;
+	}
+
+	/* Clear buffer after Play stops */
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && !prm->ss)
+		memset(prm->rbuf, 0, prm->max_psize * params->req_number);
+
+	return err;
+}
+
+static snd_pcm_uframes_t uac_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_uac_chip *uac = snd_pcm_substream_chip(substream);
+	struct uac_rtd_params *prm;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		prm = &uac->p_prm;
+	else
+		prm = &uac->c_prm;
+
+	return bytes_to_frames(substream->runtime, prm->hw_ptr);
+}
+
+static u64 uac_ssize_to_fmt(int ssize)
+{
+	u64 ret;
+
+	switch (ssize) {
+	case 3:
+		ret = SNDRV_PCM_FMTBIT_S24_3LE;
+		break;
+	case 4:
+		ret = SNDRV_PCM_FMTBIT_S32_LE;
+		break;
+	default:
+		ret = SNDRV_PCM_FMTBIT_S16_LE;
+		break;
+	}
+
+	return ret;
+}
+
+static int uac_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_uac_chip *uac = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct g_audio *audio_dev;
+	struct uac_params *params;
+	struct uac_rtd_params *prm;
+	int p_ssize, c_ssize;
+	int p_chmask, c_chmask;
+
+	audio_dev = uac->audio_dev;
+	params = &audio_dev->params;
+	p_ssize = params->p_ssize;
+	c_ssize = params->c_ssize;
+	p_chmask = params->p_chmask;
+	c_chmask = params->c_chmask;
+	uac->p_residue_mil = 0;
+
+	runtime->hw = uac_pcm_hardware;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		runtime->hw.formats = uac_ssize_to_fmt(p_ssize);
+		runtime->hw.channels_min = num_channels(p_chmask);
+		prm = &uac->p_prm;
+	} else {
+		runtime->hw.formats = uac_ssize_to_fmt(c_ssize);
+		runtime->hw.channels_min = num_channels(c_chmask);
+		prm = &uac->c_prm;
+	}
+
+	runtime->hw.period_bytes_min = 2 * prm->max_psize
+					/ runtime->hw.periods_min;
+	runtime->hw.rate_min = prm->srate;
+	runtime->hw.rate_max = runtime->hw.rate_min;
+	runtime->hw.channels_max = runtime->hw.channels_min;
+
+	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
+
+	return 0;
+}
+
+/* ALSA cries without these function pointers */
+static int uac_pcm_null(struct snd_pcm_substream *substream)
+{
+	return 0;
+}
+
+static const struct snd_pcm_ops uac_pcm_ops = {
+	.open = uac_pcm_open,
+	.close = uac_pcm_null,
+	.trigger = uac_pcm_trigger,
+	.pointer = uac_pcm_pointer,
+	.prepare = uac_pcm_null,
+};
+
+static inline void free_ep(struct uac_rtd_params *prm, struct usb_ep *ep)
+{
+	struct snd_uac_chip *uac = prm->uac;
+	struct g_audio *audio_dev;
+	struct uac_params *params;
+	int i;
+
+	if (!prm->ep_enabled)
+		return;
+
+	audio_dev = uac->audio_dev;
+	params = &audio_dev->params;
+
+	for (i = 0; i < params->req_number; i++) {
+		if (prm->reqs[i]) {
+			if (usb_ep_dequeue(ep, prm->reqs[i]))
+				usb_ep_free_request(ep, prm->reqs[i]);
+			/*
+			 * If usb_ep_dequeue() cannot successfully dequeue the
+			 * request, the request will be freed by the completion
+			 * callback.
+			 */
+
+			prm->reqs[i] = NULL;
+		}
+	}
+
+	prm->ep_enabled = false;
+
+	if (usb_ep_disable(ep))
+		dev_err(uac->card->dev, "%s:%d Error!\n", __func__, __LINE__);
+}
+
+static inline void free_ep_fback(struct uac_rtd_params *prm, struct usb_ep *ep)
+{
+	struct snd_uac_chip *uac = prm->uac;
+
+	if (!prm->fb_ep_enabled)
+		return;
+
+	if (prm->req_fback) {
+		if (usb_ep_dequeue(ep, prm->req_fback)) {
+			kfree(prm->req_fback->buf);
+			usb_ep_free_request(ep, prm->req_fback);
+		}
+		prm->req_fback = NULL;
+	}
+
+	prm->fb_ep_enabled = false;
+
+	if (usb_ep_disable(ep))
+		dev_err(uac->card->dev, "%s:%d Error!\n", __func__, __LINE__);
+}
+
+static void set_active(struct uac_rtd_params *prm, bool active)
+{
+	// notifying through the Rate ctrl
+	struct snd_kcontrol *kctl = prm->snd_kctl_rate;
+	unsigned long flags;
+
+	spin_lock_irqsave(&prm->lock, flags);
+	if (prm->active != active) {
+		prm->active = active;
+		snd_ctl_notify(prm->uac->card, SNDRV_CTL_EVENT_MASK_VALUE,
+				&kctl->id);
+	}
+	spin_unlock_irqrestore(&prm->lock, flags);
+}
+
+int u_audio_set_capture_srate(struct g_audio *audio_dev, int srate)
+{
+	struct uac_params *params = &audio_dev->params;
+	struct snd_uac_chip *uac = audio_dev->uac;
+	struct uac_rtd_params *prm;
+	int i;
+	unsigned long flags;
+
+	dev_dbg(&audio_dev->gadget->dev, "%s: srate %d\n", __func__, srate);
+	prm = &uac->c_prm;
+	for (i = 0; i < UAC_MAX_RATES; i++) {
+		if (params->c_srates[i] == srate) {
+			spin_lock_irqsave(&prm->lock, flags);
+			prm->srate = srate;
+			spin_unlock_irqrestore(&prm->lock, flags);
+			return 0;
+		}
+		if (params->c_srates[i] == 0)
+			break;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(u_audio_set_capture_srate);
+
+int u_audio_get_capture_srate(struct g_audio *audio_dev, u32 *val)
+{
+	struct snd_uac_chip *uac = audio_dev->uac;
+	struct uac_rtd_params *prm;
+	unsigned long flags;
+
+	prm = &uac->c_prm;
+	spin_lock_irqsave(&prm->lock, flags);
+	*val = prm->srate;
+	spin_unlock_irqrestore(&prm->lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(u_audio_get_capture_srate);
+
+int u_audio_set_playback_srate(struct g_audio *audio_dev, int srate)
+{
+	struct uac_params *params = &audio_dev->params;
+	struct snd_uac_chip *uac = audio_dev->uac;
+	struct uac_rtd_params *prm;
+	int i;
+	unsigned long flags;
+
+	dev_dbg(&audio_dev->gadget->dev, "%s: srate %d\n", __func__, srate);
+	prm = &uac->p_prm;
+	for (i = 0; i < UAC_MAX_RATES; i++) {
+		if (params->p_srates[i] == srate) {
+			spin_lock_irqsave(&prm->lock, flags);
+			prm->srate = srate;
+			spin_unlock_irqrestore(&prm->lock, flags);
+			return 0;
+		}
+		if (params->p_srates[i] == 0)
+			break;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(u_audio_set_playback_srate);
+
+int u_audio_get_playback_srate(struct g_audio *audio_dev, u32 *val)
+{
+	struct snd_uac_chip *uac = audio_dev->uac;
+	struct uac_rtd_params *prm;
+	unsigned long flags;
+
+	prm = &uac->p_prm;
+	spin_lock_irqsave(&prm->lock, flags);
+	*val = prm->srate;
+	spin_unlock_irqrestore(&prm->lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(u_audio_get_playback_srate);
+
+int u_audio_start_capture(struct g_audio *audio_dev)
+{
+	struct snd_uac_chip *uac = audio_dev->uac;
+	struct usb_gadget *gadget = audio_dev->gadget;
+	struct device *dev = &gadget->dev;
+	struct usb_request *req, *req_fback;
+	struct usb_ep *ep, *ep_fback;
+	struct uac_rtd_params *prm;
+	struct uac_params *params = &audio_dev->params;
+	int req_len, i;
+
+	prm = &uac->c_prm;
+	dev_dbg(dev, "start capture with rate %d\n", prm->srate);
+	ep = audio_dev->out_ep;
+	config_ep_by_speed(gadget, &audio_dev->func, ep);
+	req_len = ep->maxpacket;
+
+	prm->ep_enabled = true;
+	usb_ep_enable(ep);
+
+	for (i = 0; i < params->req_number; i++) {
+		if (!prm->reqs[i]) {
+			req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+			if (req == NULL)
+				return -ENOMEM;
+
+			prm->reqs[i] = req;
+
+			req->zero = 0;
+			req->context = prm;
+			req->length = req_len;
+			req->complete = u_audio_iso_complete;
+			req->buf = prm->rbuf + i * ep->maxpacket;
+		}
+
+		if (usb_ep_queue(ep, prm->reqs[i], GFP_ATOMIC))
+			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+	}
+
+	set_active(&uac->c_prm, true);
+
+	ep_fback = audio_dev->in_ep_fback;
+	if (!ep_fback)
+		return 0;
+
+	/* Setup feedback endpoint */
+	config_ep_by_speed(gadget, &audio_dev->func, ep_fback);
+	prm->fb_ep_enabled = true;
+	usb_ep_enable(ep_fback);
+	req_len = ep_fback->maxpacket;
+
+	req_fback = usb_ep_alloc_request(ep_fback, GFP_ATOMIC);
+	if (req_fback == NULL)
+		return -ENOMEM;
+
+	prm->req_fback = req_fback;
+	req_fback->zero = 0;
+	req_fback->context = prm;
+	req_fback->length = req_len;
+	req_fback->complete = u_audio_iso_fback_complete;
+
+	req_fback->buf = kzalloc(req_len, GFP_ATOMIC);
+	if (!req_fback->buf)
+		return -ENOMEM;
+
+	/*
+	 * Configure the feedback endpoint's reported frequency.
+	 * Always start with original frequency since its deviation can't
+	 * be meauserd at start of playback
+	 */
+	prm->pitch = 1000000;
+	u_audio_set_fback_frequency(audio_dev->gadget->speed, ep,
+				    prm->srate, prm->pitch,
+				    req_fback->buf);
+
+	if (usb_ep_queue(ep_fback, req_fback, GFP_ATOMIC))
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(u_audio_start_capture);
+
+void u_audio_stop_capture(struct g_audio *audio_dev)
+{
+	struct snd_uac_chip *uac = audio_dev->uac;
+
+	set_active(&uac->c_prm, false);
+	if (audio_dev->in_ep_fback)
+		free_ep_fback(&uac->c_prm, audio_dev->in_ep_fback);
+	free_ep(&uac->c_prm, audio_dev->out_ep);
+}
+EXPORT_SYMBOL_GPL(u_audio_stop_capture);
+
+int u_audio_start_playback(struct g_audio *audio_dev)
+{
+	struct snd_uac_chip *uac = audio_dev->uac;
+	struct usb_gadget *gadget = audio_dev->gadget;
+	struct device *dev = &gadget->dev;
+	struct usb_request *req;
+	struct usb_ep *ep;
+	struct uac_rtd_params *prm;
+	struct uac_params *params = &audio_dev->params;
+	unsigned int factor;
+	const struct usb_endpoint_descriptor *ep_desc;
+	int req_len, i;
+	unsigned int p_pktsize;
+
+	prm = &uac->p_prm;
+	dev_dbg(dev, "start playback with rate %d\n", prm->srate);
+	ep = audio_dev->in_ep;
+	config_ep_by_speed(gadget, &audio_dev->func, ep);
+
+	ep_desc = ep->desc;
+	/*
+	 * Always start with original frequency
+	 */
+	prm->pitch = 1000000;
+
+	/* pre-calculate the playback endpoint's interval */
+	if (gadget->speed == USB_SPEED_FULL)
+		factor = 1000;
+	else
+		factor = 8000;
+
+	/* pre-compute some values for iso_complete() */
+	uac->p_framesize = params->p_ssize *
+			    num_channels(params->p_chmask);
+	uac->p_interval = factor / (1 << (ep_desc->bInterval - 1));
+	p_pktsize = min_t(unsigned int,
+				uac->p_framesize *
+					(prm->srate / uac->p_interval),
+				ep->maxpacket);
+
+	req_len = p_pktsize;
+	uac->p_residue_mil = 0;
+
+	prm->ep_enabled = true;
+	usb_ep_enable(ep);
+
+	for (i = 0; i < params->req_number; i++) {
+		if (!prm->reqs[i]) {
+			req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+			if (req == NULL)
+				return -ENOMEM;
+
+			prm->reqs[i] = req;
+
+			req->zero = 0;
+			req->context = prm;
+			req->length = req_len;
+			req->complete = u_audio_iso_complete;
+			req->buf = prm->rbuf + i * ep->maxpacket;
+		}
+
+		if (usb_ep_queue(ep, prm->reqs[i], GFP_ATOMIC))
+			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+	}
+
+	set_active(&uac->p_prm, true);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(u_audio_start_playback);
+
+void u_audio_stop_playback(struct g_audio *audio_dev)
+{
+	struct snd_uac_chip *uac = audio_dev->uac;
+
+	set_active(&uac->p_prm, false);
+	free_ep(&uac->p_prm, audio_dev->in_ep);
+}
+EXPORT_SYMBOL_GPL(u_audio_stop_playback);
+
+void u_audio_suspend(struct g_audio *audio_dev)
+{
+	struct snd_uac_chip *uac = audio_dev->uac;
+
+	set_active(&uac->p_prm, false);
+	set_active(&uac->c_prm, false);
+}
+EXPORT_SYMBOL_GPL(u_audio_suspend);
+
+int u_audio_get_volume(struct g_audio *audio_dev, int playback, s16 *val)
+{
+	struct snd_uac_chip *uac = audio_dev->uac;
+	struct uac_rtd_params *prm;
+	unsigned long flags;
+
+	if (playback)
+		prm = &uac->p_prm;
+	else
+		prm = &uac->c_prm;
+
+	spin_lock_irqsave(&prm->lock, flags);
+	*val = prm->volume;
+	spin_unlock_irqrestore(&prm->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(u_audio_get_volume);
+
+int u_audio_set_volume(struct g_audio *audio_dev, int playback, s16 val)
+{
+	struct snd_uac_chip *uac = audio_dev->uac;
+	struct uac_rtd_params *prm;
+	unsigned long flags;
+	int change = 0;
+
+	if (playback)
+		prm = &uac->p_prm;
+	else
+		prm = &uac->c_prm;
+
+	spin_lock_irqsave(&prm->lock, flags);
+	val = clamp(val, prm->volume_min, prm->volume_max);
+	if (prm->volume != val) {
+		prm->volume = val;
+		change = 1;
+	}
+	spin_unlock_irqrestore(&prm->lock, flags);
+
+	if (change)
+		snd_ctl_notify(uac->card, SNDRV_CTL_EVENT_MASK_VALUE,
+				&prm->snd_kctl_volume->id);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(u_audio_set_volume);
+
+int u_audio_get_mute(struct g_audio *audio_dev, int playback, int *val)
+{
+	struct snd_uac_chip *uac = audio_dev->uac;
+	struct uac_rtd_params *prm;
+	unsigned long flags;
+
+	if (playback)
+		prm = &uac->p_prm;
+	else
+		prm = &uac->c_prm;
+
+	spin_lock_irqsave(&prm->lock, flags);
+	*val = prm->mute;
+	spin_unlock_irqrestore(&prm->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(u_audio_get_mute);
+
+int u_audio_set_mute(struct g_audio *audio_dev, int playback, int val)
+{
+	struct snd_uac_chip *uac = audio_dev->uac;
+	struct uac_rtd_params *prm;
+	unsigned long flags;
+	int change = 0;
+	int mute;
+
+	if (playback)
+		prm = &uac->p_prm;
+	else
+		prm = &uac->c_prm;
+
+	mute = val ? 1 : 0;
+
+	spin_lock_irqsave(&prm->lock, flags);
+	if (prm->mute != mute) {
+		prm->mute = mute;
+		change = 1;
+	}
+	spin_unlock_irqrestore(&prm->lock, flags);
+
+	if (change)
+		snd_ctl_notify(uac->card, SNDRV_CTL_EVENT_MASK_VALUE,
+			       &prm->snd_kctl_mute->id);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(u_audio_set_mute);
+
+
+static int u_audio_pitch_info(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_info *uinfo)
+{
+	struct uac_rtd_params *prm = snd_kcontrol_chip(kcontrol);
+	struct snd_uac_chip *uac = prm->uac;
+	struct g_audio *audio_dev = uac->audio_dev;
+	struct uac_params *params = &audio_dev->params;
+	unsigned int pitch_min, pitch_max;
+
+	pitch_min = (1000 - FBACK_SLOW_MAX) * 1000;
+	pitch_max = (1000 + params->fb_max) * 1000;
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = pitch_min;
+	uinfo->value.integer.max = pitch_max;
+	uinfo->value.integer.step = 1;
+	return 0;
+}
+
+static int u_audio_pitch_get(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct uac_rtd_params *prm = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] = prm->pitch;
+
+	return 0;
+}
+
+static int u_audio_pitch_put(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct uac_rtd_params *prm = snd_kcontrol_chip(kcontrol);
+	struct snd_uac_chip *uac = prm->uac;
+	struct g_audio *audio_dev = uac->audio_dev;
+	struct uac_params *params = &audio_dev->params;
+	unsigned int val;
+	unsigned int pitch_min, pitch_max;
+	int change = 0;
+
+	pitch_min = (1000 - FBACK_SLOW_MAX) * 1000;
+	pitch_max = (1000 + params->fb_max) * 1000;
+
+	val = ucontrol->value.integer.value[0];
+
+	if (val < pitch_min)
+		val = pitch_min;
+	if (val > pitch_max)
+		val = pitch_max;
+
+	if (prm->pitch != val) {
+		prm->pitch = val;
+		change = 1;
+	}
+
+	return change;
+}
+
+static int u_audio_mute_info(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	uinfo->value.integer.step = 1;
+
+	return 0;
+}
+
+static int u_audio_mute_get(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct uac_rtd_params *prm = snd_kcontrol_chip(kcontrol);
+	unsigned long flags;
+
+	spin_lock_irqsave(&prm->lock, flags);
+	ucontrol->value.integer.value[0] = !prm->mute;
+	spin_unlock_irqrestore(&prm->lock, flags);
+
+	return 0;
+}
+
+static int u_audio_mute_put(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct uac_rtd_params *prm = snd_kcontrol_chip(kcontrol);
+	struct snd_uac_chip *uac = prm->uac;
+	struct g_audio *audio_dev = uac->audio_dev;
+	unsigned int val;
+	unsigned long flags;
+	int change = 0;
+
+	val = !ucontrol->value.integer.value[0];
+
+	spin_lock_irqsave(&prm->lock, flags);
+	if (val != prm->mute) {
+		prm->mute = val;
+		change = 1;
+	}
+	spin_unlock_irqrestore(&prm->lock, flags);
+
+	if (change && audio_dev->notify)
+		audio_dev->notify(audio_dev, prm->fu_id, UAC_FU_MUTE);
+
+	return change;
+}
+
+/*
+ * TLV callback for mixer volume controls
+ */
+static int u_audio_volume_tlv(struct snd_kcontrol *kcontrol, int op_flag,
+			 unsigned int size, unsigned int __user *_tlv)
+{
+	struct uac_rtd_params *prm = snd_kcontrol_chip(kcontrol);
+	DECLARE_TLV_DB_MINMAX(scale, 0, 0);
+
+	if (size < sizeof(scale))
+		return -ENOMEM;
+
+	/* UAC volume resolution is 1/256 dB, TLV is 1/100 dB */
+	scale[2] = (prm->volume_min * 100) / 256;
+	scale[3] = (prm->volume_max * 100) / 256;
+	if (copy_to_user(_tlv, scale, sizeof(scale)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int u_audio_volume_info(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_info *uinfo)
+{
+	struct uac_rtd_params *prm = snd_kcontrol_chip(kcontrol);
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max =
+		(prm->volume_max - prm->volume_min + prm->volume_res - 1)
+		/ prm->volume_res;
+	uinfo->value.integer.step = 1;
+
+	return 0;
+}
+
+static int u_audio_volume_get(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct uac_rtd_params *prm = snd_kcontrol_chip(kcontrol);
+	unsigned long flags;
+
+	spin_lock_irqsave(&prm->lock, flags);
+	ucontrol->value.integer.value[0] =
+			(prm->volume - prm->volume_min) / prm->volume_res;
+	spin_unlock_irqrestore(&prm->lock, flags);
+
+	return 0;
+}
+
+static int u_audio_volume_put(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct uac_rtd_params *prm = snd_kcontrol_chip(kcontrol);
+	struct snd_uac_chip *uac = prm->uac;
+	struct g_audio *audio_dev = uac->audio_dev;
+	unsigned int val;
+	s16 volume;
+	unsigned long flags;
+	int change = 0;
+
+	val = ucontrol->value.integer.value[0];
+
+	spin_lock_irqsave(&prm->lock, flags);
+	volume = (val * prm->volume_res) + prm->volume_min;
+	volume = clamp(volume, prm->volume_min, prm->volume_max);
+	if (volume != prm->volume) {
+		prm->volume = volume;
+		change = 1;
+	}
+	spin_unlock_irqrestore(&prm->lock, flags);
+
+	if (change && audio_dev->notify)
+		audio_dev->notify(audio_dev, prm->fu_id, UAC_FU_VOLUME);
+
+	return change;
+}
+
+static int get_max_srate(const int *srates)
+{
+	int i, max_srate = 0;
+
+	for (i = 0; i < UAC_MAX_RATES; i++) {
+		if (srates[i] == 0)
+			break;
+		if (srates[i] > max_srate)
+			max_srate = srates[i];
+	}
+	return max_srate;
+}
+
+static int get_min_srate(const int *srates)
+{
+	int i, min_srate = INT_MAX;
+
+	for (i = 0; i < UAC_MAX_RATES; i++) {
+		if (srates[i] == 0)
+			break;
+		if (srates[i] < min_srate)
+			min_srate = srates[i];
+	}
+	return min_srate;
+}
+
+static int u_audio_rate_info(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_info *uinfo)
+{
+	const int *srates;
+	struct uac_rtd_params *prm = snd_kcontrol_chip(kcontrol);
+	struct snd_uac_chip *uac = prm->uac;
+	struct g_audio *audio_dev = uac->audio_dev;
+	struct uac_params *params = &audio_dev->params;
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+
+	if (prm == &uac->c_prm)
+		srates = params->c_srates;
+	else
+		srates = params->p_srates;
+	uinfo->value.integer.min = get_min_srate(srates);
+	uinfo->value.integer.max = get_max_srate(srates);
+	return 0;
+}
+
+static int u_audio_rate_get(struct snd_kcontrol *kcontrol,
+						 struct snd_ctl_elem_value *ucontrol)
+{
+	struct uac_rtd_params *prm = snd_kcontrol_chip(kcontrol);
+	unsigned long flags;
+
+	spin_lock_irqsave(&prm->lock, flags);
+	if (prm->active)
+		ucontrol->value.integer.value[0] = prm->srate;
+	else
+		/* not active: reporting zero rate */
+		ucontrol->value.integer.value[0] = 0;
+	spin_unlock_irqrestore(&prm->lock, flags);
+	return 0;
+}
+
+static struct snd_kcontrol_new u_audio_controls[]  = {
+  [UAC_FBACK_CTRL] {
+    .iface =        SNDRV_CTL_ELEM_IFACE_PCM,
+    .name =         "Capture Pitch 1000000",
+    .info =         u_audio_pitch_info,
+    .get =          u_audio_pitch_get,
+    .put =          u_audio_pitch_put,
+  },
+	[UAC_P_PITCH_CTRL] {
+		.iface =        SNDRV_CTL_ELEM_IFACE_PCM,
+		.name =         "Playback Pitch 1000000",
+		.info =         u_audio_pitch_info,
+		.get =          u_audio_pitch_get,
+		.put =          u_audio_pitch_put,
+	},
+  [UAC_MUTE_CTRL] {
+		.iface =	SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name =		"", /* will be filled later */
+		.info =		u_audio_mute_info,
+		.get =		u_audio_mute_get,
+		.put =		u_audio_mute_put,
+	},
+	[UAC_VOLUME_CTRL] {
+		.iface =	SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name =		"", /* will be filled later */
+		.info =		u_audio_volume_info,
+		.get =		u_audio_volume_get,
+		.put =		u_audio_volume_put,
+	},
+	[UAC_RATE_CTRL] {
+		.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
+		.name =		"", /* will be filled later */
+		.access =	SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info =		u_audio_rate_info,
+		.get =		u_audio_rate_get,
+	},
+};
+
+int g_audio_setup(struct g_audio *g_audio, const char *pcm_name,
+					const char *card_name)
+{
+	struct snd_uac_chip *uac;
+	struct snd_card *card;
+	struct snd_pcm *pcm;
+	struct snd_kcontrol *kctl;
+	struct uac_params *params;
+	int p_chmask, c_chmask;
+	int i, err;
+
+	if (!g_audio)
+		return -EINVAL;
+
+	uac = kzalloc(sizeof(*uac), GFP_KERNEL);
+	if (!uac)
+		return -ENOMEM;
+	g_audio->uac = uac;
+	uac->audio_dev = g_audio;
+
+	params = &g_audio->params;
+	p_chmask = params->p_chmask;
+	c_chmask = params->c_chmask;
+
+	if (c_chmask) {
+		struct uac_rtd_params *prm = &uac->c_prm;
+
+		spin_lock_init(&prm->lock);
+		uac->c_prm.uac = uac;
+		prm->max_psize = g_audio->out_ep_maxpsize;
+		prm->srate = params->c_srates[0];
+
+		prm->reqs = kcalloc(params->req_number,
+				    sizeof(struct usb_request *),
+				    GFP_KERNEL);
+		if (!prm->reqs) {
+			err = -ENOMEM;
+			goto fail;
+		}
+
+		prm->rbuf = kcalloc(params->req_number, prm->max_psize,
+				GFP_KERNEL);
+		if (!prm->rbuf) {
+			prm->max_psize = 0;
+			err = -ENOMEM;
+			goto fail;
+		}
+	}
+
+	if (p_chmask) {
+		struct uac_rtd_params *prm = &uac->p_prm;
+
+		spin_lock_init(&prm->lock);
+		uac->p_prm.uac = uac;
+		prm->max_psize = g_audio->in_ep_maxpsize;
+		prm->srate = params->p_srates[0];
+
+		prm->reqs = kcalloc(params->req_number,
+				    sizeof(struct usb_request *),
+				    GFP_KERNEL);
+		if (!prm->reqs) {
+			err = -ENOMEM;
+			goto fail;
+		}
+
+		prm->rbuf = kcalloc(params->req_number, prm->max_psize,
+				GFP_KERNEL);
+		if (!prm->rbuf) {
+			prm->max_psize = 0;
+			err = -ENOMEM;
+			goto fail;
+		}
+	}
+
+	/* Choose any slot, with no id */
+	err = snd_card_new(&g_audio->gadget->dev,
+			-1, NULL, THIS_MODULE, 0, &card);
+	if (err < 0)
+		goto fail;
+
+	uac->card = card;
+
+	/*
+	 * Create first PCM device
+	 * Create a substream only for non-zero channel streams
+	 */
+	err = snd_pcm_new(uac->card, pcm_name, 0,
+			       p_chmask ? 1 : 0, c_chmask ? 1 : 0, &pcm);
+	if (err < 0)
+		goto snd_fail;
+
+	strscpy(pcm->name, pcm_name, sizeof(pcm->name));
+	pcm->private_data = uac;
+	uac->pcm = pcm;
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &uac_pcm_ops);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &uac_pcm_ops);
+
+	/*
+	 * Create mixer and controls
+	 * Create only if it's required on USB side
+	 */
+	if ((c_chmask && g_audio->in_ep_fback)
+			|| (p_chmask && params->p_fu.id)
+			|| (c_chmask && params->c_fu.id))
+		strscpy(card->mixername, card_name, sizeof(card->driver));
+
+	if (c_chmask && g_audio->in_ep_fback) {
+		kctl = snd_ctl_new1(&u_audio_controls[UAC_FBACK_CTRL],
+				    &uac->c_prm);
+		if (!kctl) {
+			err = -ENOMEM;
+			goto snd_fail;
+		}
+
+		kctl->id.device = pcm->device;
+		kctl->id.subdevice = 0;
+
+		err = snd_ctl_add(card, kctl);
+		if (err < 0)
+			goto snd_fail;
+	}
+
+	if (p_chmask) {
+		kctl = snd_ctl_new1(&u_audio_controls[UAC_P_PITCH_CTRL],
+				    &uac->p_prm);
+		if (!kctl) {
+			err = -ENOMEM;
+			goto snd_fail;
+		}
+
+		kctl->id.device = pcm->device;
+		kctl->id.subdevice = 0;
+
+		err = snd_ctl_add(card, kctl);
+		if (err < 0)
+			goto snd_fail;
+	}
+
+	for (i = 0; i <= SNDRV_PCM_STREAM_LAST; i++) {
+		struct uac_rtd_params *prm;
+		struct uac_fu_params *fu;
+		char ctrl_name[24];
+		char *direction;
+
+		if (!pcm->streams[i].substream_count)
+			continue;
+
+		if (i == SNDRV_PCM_STREAM_PLAYBACK) {
+			prm = &uac->p_prm;
+			fu = &params->p_fu;
+			direction = "Playback";
+		} else {
+			prm = &uac->c_prm;
+			fu = &params->c_fu;
+			direction = "Capture";
+		}
+
+		prm->fu_id = fu->id;
+
+		if (fu->mute_present) {
+			snprintf(ctrl_name, sizeof(ctrl_name),
+					"PCM %s Switch", direction);
+
+			u_audio_controls[UAC_MUTE_CTRL].name = ctrl_name;
+
+			kctl = snd_ctl_new1(&u_audio_controls[UAC_MUTE_CTRL],
+					    prm);
+			if (!kctl) {
+				err = -ENOMEM;
+				goto snd_fail;
+			}
+
+			kctl->id.device = pcm->device;
+			kctl->id.subdevice = 0;
+
+			err = snd_ctl_add(card, kctl);
+			if (err < 0)
+				goto snd_fail;
+			prm->snd_kctl_mute = kctl;
+			prm->mute = 0;
+		}
+
+		if (fu->volume_present) {
+			snprintf(ctrl_name, sizeof(ctrl_name),
+					"PCM %s Volume", direction);
+
+			u_audio_controls[UAC_VOLUME_CTRL].name = ctrl_name;
+
+			kctl = snd_ctl_new1(&u_audio_controls[UAC_VOLUME_CTRL],
+					    prm);
+			if (!kctl) {
+				err = -ENOMEM;
+				goto snd_fail;
+			}
+
+			kctl->id.device = pcm->device;
+			kctl->id.subdevice = 0;
+
+
+			kctl->tlv.c = u_audio_volume_tlv;
+			kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+					SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+
+			err = snd_ctl_add(card, kctl);
+			if (err < 0)
+				goto snd_fail;
+			prm->snd_kctl_volume = kctl;
+			prm->volume = fu->volume_max;
+			prm->volume_max = fu->volume_max;
+			prm->volume_min = fu->volume_min;
+			prm->volume_res = fu->volume_res;
+		}
+
+		/* Add rate control */
+		snprintf(ctrl_name, sizeof(ctrl_name),
+				"%s Rate", direction);
+		u_audio_controls[UAC_RATE_CTRL].name = ctrl_name;
+
+		kctl = snd_ctl_new1(&u_audio_controls[UAC_RATE_CTRL], prm);
+		if (!kctl) {
+			err = -ENOMEM;
+			goto snd_fail;
+		}
+
+		kctl->id.device = pcm->device;
+		kctl->id.subdevice = 0;
+
+		err = snd_ctl_add(card, kctl);
+		if (err < 0)
+			goto snd_fail;
+		prm->snd_kctl_rate = kctl;
+	}
+
+	strscpy(card->driver, card_name, sizeof(card->driver));
+	strscpy(card->shortname, card_name, sizeof(card->shortname));
+	sprintf(card->longname, "%s %i", card_name, card->dev->id);
+
+	snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
+				       NULL, 0, BUFF_SIZE_MAX);
+
+	err = snd_card_register(card);
+
+	if (!err)
+		return 0;
+
+snd_fail:
+	snd_card_free(card);
+fail:
+	kfree(uac->p_prm.reqs);
+	kfree(uac->c_prm.reqs);
+	kfree(uac->p_prm.rbuf);
+	kfree(uac->c_prm.rbuf);
+	kfree(uac);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(g_audio_setup);
+
+void g_audio_cleanup(struct g_audio *g_audio)
+{
+	struct snd_uac_chip *uac;
+	struct snd_card *card;
+
+	if (!g_audio || !g_audio->uac)
+		return;
+
+	uac = g_audio->uac;
+	card = uac->card;
+	if (card)
+		snd_card_free_when_closed(card);
+
+	kfree(uac->p_prm.reqs);
+	kfree(uac->c_prm.reqs);
+	kfree(uac->p_prm.rbuf);
+	kfree(uac->c_prm.rbuf);
+	kfree(uac);
+}
+EXPORT_SYMBOL_GPL(g_audio_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("USB gadget \"ALSA sound card\" utilities");
+MODULE_AUTHOR("Ruslan Bilovol");
diff --git a/drivers/usb/gadget/function/u_audio.h b/drivers/usb/gadget/function/u_audio.h
new file mode 100644
index 000000000..9512b8fcc
--- /dev/null
+++ b/drivers/usb/gadget/function/u_audio.h
@@ -0,0 +1,135 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * u_audio.h -- interface to USB gadget "ALSA sound card" utilities
+ *
+ * Copyright (C) 2016
+ * Author: Ruslan Bilovol <ruslan.bilovol@gmail.com>
+ */
+
+#ifndef __U_AUDIO_H
+#define __U_AUDIO_H
+
+#include <linux/usb/composite.h>
+#include "uac_common.h"
+
+/*
+ * Same maximum frequency deviation on the slower side as in
+ * sound/usb/endpoint.c. Value is expressed in per-mil deviation.
+ */
+#define FBACK_SLOW_MAX	250
+
+/*
+ * Maximum frequency deviation on the faster side, default value for UAC1/2.
+ * Value is expressed in per-mil deviation.
+ * UAC2 provides the value as a parameter as it impacts the endpoint required
+ * bandwidth.
+ */
+#define FBACK_FAST_MAX 5
+
+/* Feature Unit parameters */
+struct uac_fu_params {
+	int id;			/* Feature Unit ID */
+
+	bool mute_present;	/* mute control enable */
+
+	bool volume_present;	/* volume control enable */
+	s16 volume_min;		/* min volume in 1/256 dB */
+	s16 volume_max;		/* max volume in 1/256 dB */
+	s16 volume_res;		/* volume resolution in 1/256 dB */
+};
+
+struct uac_params {
+	/* playback */
+	int p_chmask;	/* channel mask */
+	int p_srates[UAC_MAX_RATES];	/* available rates in Hz (0 terminated list) */
+	int p_ssize;	/* sample size */
+	struct uac_fu_params p_fu;	/* Feature Unit parameters */
+
+	/* capture */
+	int c_chmask;	/* channel mask */
+	int c_srates[UAC_MAX_RATES];	/* available rates in Hz (0 terminated list) */
+	int c_ssize;	/* sample size */
+	struct uac_fu_params c_fu;	/* Feature Unit parameters */
+
+	/* rates are dynamic, in uac_rtd_params */
+
+	int req_number; /* number of preallocated requests */
+	int fb_max;	/* upper frequency drift feedback limit per-mil */
+};
+
+struct g_audio {
+	struct usb_function func;
+	struct usb_gadget *gadget;
+
+	struct usb_ep *in_ep;
+
+	struct usb_ep *out_ep;
+	/* feedback IN endpoint corresponding to out_ep */
+	struct usb_ep *in_ep_fback;
+
+	/* Max packet size for all in_ep possible speeds */
+	unsigned int in_ep_maxpsize;
+	/* Max packet size for all out_ep possible speeds */
+	unsigned int out_ep_maxpsize;
+
+	/* Notify UAC driver about control change */
+	int (*notify)(struct g_audio *g_audio, int unit_id, int cs);
+
+	/* The ALSA Sound Card it represents on the USB-Client side */
+	struct snd_uac_chip *uac;
+
+	struct uac_params params;
+};
+
+static inline struct g_audio *func_to_g_audio(struct usb_function *f)
+{
+	return container_of(f, struct g_audio, func);
+}
+
+static inline uint num_channels(uint chanmask)
+{
+	uint num = 0;
+
+	while (chanmask) {
+		num += (chanmask & 1);
+		chanmask >>= 1;
+	}
+
+	return num;
+}
+
+/*
+ * g_audio_setup - initialize one virtual ALSA sound card
+ * @g_audio: struct with filled params, in_ep_maxpsize, out_ep_maxpsize
+ * @pcm_name: the id string for a PCM instance of this sound card
+ * @card_name: name of this soundcard
+ *
+ * This sets up the single virtual ALSA sound card that may be exported by a
+ * gadget driver using this framework.
+ *
+ * Context: may sleep
+ *
+ * Returns zero on success, or a negative error on failure.
+ */
+int g_audio_setup(struct g_audio *g_audio, const char *pcm_name,
+					const char *card_name);
+void g_audio_cleanup(struct g_audio *g_audio);
+
+int u_audio_start_capture(struct g_audio *g_audio);
+void u_audio_stop_capture(struct g_audio *g_audio);
+int u_audio_start_playback(struct g_audio *g_audio);
+void u_audio_stop_playback(struct g_audio *g_audio);
+
+int u_audio_get_capture_srate(struct g_audio *audio_dev, u32 *val);
+int u_audio_set_capture_srate(struct g_audio *audio_dev, int srate);
+int u_audio_get_playback_srate(struct g_audio *audio_dev, u32 *val);
+int u_audio_set_playback_srate(struct g_audio *audio_dev, int srate);
+
+int u_audio_get_volume(struct g_audio *g_audio, int playback, s16 *val);
+int u_audio_set_volume(struct g_audio *g_audio, int playback, s16 val);
+int u_audio_get_mute(struct g_audio *g_audio, int playback, int *val);
+int u_audio_set_mute(struct g_audio *g_audio, int playback, int val);
+
+void u_audio_suspend(struct g_audio *g_audio);
+
+#endif /* __U_AUDIO_H */
diff --git a/drivers/usb/gadget/function/u_ecm.h b/drivers/usb/gadget/function/u_ecm.h
new file mode 100644
index 000000000..77cfb8993
--- /dev/null
+++ b/drivers/usb/gadget/function/u_ecm.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * u_ecm.h
+ *
+ * Utility definitions for the ecm function
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#ifndef U_ECM_H
+#define U_ECM_H
+
+#include <linux/usb/composite.h>
+
+struct f_ecm_opts {
+	struct usb_function_instance	func_inst;
+	struct net_device		*net;
+	bool				bound;
+
+	/*
+	 * Read/write access to configfs attributes is handled by configfs.
+	 *
+	 * This is to protect the data from concurrent access by read/write
+	 * and create symlink/remove symlink.
+	 */
+	struct mutex			lock;
+	int				refcnt;
+};
+
+#endif /* U_ECM_H */
diff --git a/drivers/usb/gadget/function/u_eem.h b/drivers/usb/gadget/function/u_eem.h
new file mode 100644
index 000000000..3bd85dfcd
--- /dev/null
+++ b/drivers/usb/gadget/function/u_eem.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * u_eem.h
+ *
+ * Utility definitions for the eem function
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#ifndef U_EEM_H
+#define U_EEM_H
+
+#include <linux/usb/composite.h>
+
+struct f_eem_opts {
+	struct usb_function_instance	func_inst;
+	struct net_device		*net;
+	bool				bound;
+
+	/*
+	 * Read/write access to configfs attributes is handled by configfs.
+	 *
+	 * This is to protect the data from concurrent access by read/write
+	 * and create symlink/remove symlink.
+	 */
+	struct mutex			lock;
+	int				refcnt;
+};
+
+#endif /* U_EEM_H */
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
new file mode 100644
index 000000000..1f420ff8f
--- /dev/null
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -0,0 +1,1223 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * u_ether.c -- Ethernet-over-USB link layer utilities for Gadget stack
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gfp.h>
+#include <linux/device.h>
+#include <linux/ctype.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/string_helpers.h>
+
+#include "u_ether.h"
+
+
+/*
+ * This component encapsulates the Ethernet link glue needed to provide
+ * one (!) network link through the USB gadget stack, normally "usb0".
+ *
+ * The control and data models are handled by the function driver which
+ * connects to this code; such as CDC Ethernet (ECM or EEM),
+ * "CDC Subset", or RNDIS.  That includes all descriptor and endpoint
+ * management.
+ *
+ * Link level addressing is handled by this component using module
+ * parameters; if no such parameters are provided, random link level
+ * addresses are used.  Each end of the link uses one address.  The
+ * host end address is exported in various ways, and is often recorded
+ * in configuration databases.
+ *
+ * The driver which assembles each configuration using such a link is
+ * responsible for ensuring that each configuration includes at most one
+ * instance of is network link.  (The network layer provides ways for
+ * this single "physical" link to be used by multiple virtual links.)
+ */
+
+#define UETH__VERSION	"29-May-2008"
+
+/* Experiments show that both Linux and Windows hosts allow up to 16k
+ * frame sizes. Set the max MTU size to 15k+52 to prevent allocating 32k
+ * blocks and still have efficient handling. */
+#define GETHER_MAX_MTU_SIZE 15412
+#define GETHER_MAX_ETH_FRAME_LEN (GETHER_MAX_MTU_SIZE + ETH_HLEN)
+
+struct eth_dev {
+	/* lock is held while accessing port_usb
+	 */
+	spinlock_t		lock;
+	struct gether		*port_usb;
+
+	struct net_device	*net;
+	struct usb_gadget	*gadget;
+
+	spinlock_t		req_lock;	/* guard {rx,tx}_reqs */
+	struct list_head	tx_reqs, rx_reqs;
+	atomic_t		tx_qlen;
+
+	struct sk_buff_head	rx_frames;
+
+	unsigned		qmult;
+
+	unsigned		header_len;
+	struct sk_buff		*(*wrap)(struct gether *, struct sk_buff *skb);
+	int			(*unwrap)(struct gether *,
+						struct sk_buff *skb,
+						struct sk_buff_head *list);
+
+	struct work_struct	work;
+
+	unsigned long		todo;
+#define	WORK_RX_MEMORY		0
+
+	bool			zlp;
+	bool			no_skb_reserve;
+	bool			ifname_set;
+	u8			host_mac[ETH_ALEN];
+	u8			dev_mac[ETH_ALEN];
+};
+
+/*-------------------------------------------------------------------------*/
+
+#define RX_EXTRA	20	/* bytes guarding against rx overflows */
+
+#define DEFAULT_QLEN	2	/* double buffering by default */
+
+/* for dual-speed hardware, use deeper queues at high/super speed */
+static inline int qlen(struct usb_gadget *gadget, unsigned qmult)
+{
+	if (gadget_is_dualspeed(gadget) && (gadget->speed == USB_SPEED_HIGH ||
+					    gadget->speed >= USB_SPEED_SUPER))
+		return qmult * DEFAULT_QLEN;
+	else
+		return DEFAULT_QLEN;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* REVISIT there must be a better way than having two sets
+ * of debug calls ...
+ */
+
+#undef DBG
+#undef VDBG
+#undef ERROR
+#undef INFO
+
+#define xprintk(d, level, fmt, args...) \
+	printk(level "%s: " fmt , (d)->net->name , ## args)
+
+#ifdef DEBUG
+#undef DEBUG
+#define DBG(dev, fmt, args...) \
+	xprintk(dev , KERN_DEBUG , fmt , ## args)
+#else
+#define DBG(dev, fmt, args...) \
+	do { } while (0)
+#endif /* DEBUG */
+
+#ifdef VERBOSE_DEBUG
+#define VDBG	DBG
+#else
+#define VDBG(dev, fmt, args...) \
+	do { } while (0)
+#endif /* DEBUG */
+
+#define ERROR(dev, fmt, args...) \
+	xprintk(dev , KERN_ERR , fmt , ## args)
+#define INFO(dev, fmt, args...) \
+	xprintk(dev , KERN_INFO , fmt , ## args)
+
+/*-------------------------------------------------------------------------*/
+
+/* NETWORK DRIVER HOOKUP (to the layer above this driver) */
+
+static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
+{
+	struct eth_dev *dev = netdev_priv(net);
+
+	strscpy(p->driver, "g_ether", sizeof(p->driver));
+	strscpy(p->version, UETH__VERSION, sizeof(p->version));
+	strscpy(p->fw_version, dev->gadget->name, sizeof(p->fw_version));
+	strscpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof(p->bus_info));
+}
+
+/* REVISIT can also support:
+ *   - WOL (by tracking suspends and issuing remote wakeup)
+ *   - msglevel (implies updated messaging)
+ *   - ... probably more ethtool ops
+ */
+
+static const struct ethtool_ops ops = {
+	.get_drvinfo = eth_get_drvinfo,
+	.get_link = ethtool_op_get_link,
+};
+
+static void defer_kevent(struct eth_dev *dev, int flag)
+{
+	if (test_and_set_bit(flag, &dev->todo))
+		return;
+	if (!schedule_work(&dev->work))
+		ERROR(dev, "kevent %d may have been dropped\n", flag);
+	else
+		DBG(dev, "kevent %d scheduled\n", flag);
+}
+
+static void rx_complete(struct usb_ep *ep, struct usb_request *req);
+
+static int
+rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
+{
+	struct usb_gadget *g = dev->gadget;
+	struct sk_buff	*skb;
+	int		retval = -ENOMEM;
+	size_t		size = 0;
+	struct usb_ep	*out;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->port_usb)
+		out = dev->port_usb->out_ep;
+	else
+		out = NULL;
+
+	if (!out)
+	{
+		spin_unlock_irqrestore(&dev->lock, flags);
+		return -ENOTCONN;
+	}
+
+	/* Padding up to RX_EXTRA handles minor disagreements with host.
+	 * Normally we use the USB "terminate on short read" convention;
+	 * so allow up to (N*maxpacket), since that memory is normally
+	 * already allocated.  Some hardware doesn't deal well with short
+	 * reads (e.g. DMA must be N*maxpacket), so for now don't trim a
+	 * byte off the end (to force hardware errors on overflow).
+	 *
+	 * RNDIS uses internal framing, and explicitly allows senders to
+	 * pad to end-of-packet.  That's potentially nice for speed, but
+	 * means receivers can't recover lost synch on their own (because
+	 * new packets don't only start after a short RX).
+	 */
+	size += sizeof(struct ethhdr) + dev->net->mtu + RX_EXTRA;
+	size += dev->port_usb->header_len;
+
+	if (g->quirk_ep_out_aligned_size) {
+		size += out->maxpacket - 1;
+		size -= size % out->maxpacket;
+	}
+
+	if (dev->port_usb->is_fixed)
+		size = max_t(size_t, size, dev->port_usb->fixed_out_len);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	skb = __netdev_alloc_skb(dev->net, size + NET_IP_ALIGN, gfp_flags);
+	if (skb == NULL) {
+		DBG(dev, "no rx skb\n");
+		goto enomem;
+	}
+
+	/* Some platforms perform better when IP packets are aligned,
+	 * but on at least one, checksumming fails otherwise.  Note:
+	 * RNDIS headers involve variable numbers of LE32 values.
+	 */
+	if (likely(!dev->no_skb_reserve))
+		skb_reserve(skb, NET_IP_ALIGN);
+
+	req->buf = skb->data;
+	req->length = size;
+	req->complete = rx_complete;
+	req->context = skb;
+
+	retval = usb_ep_queue(out, req, gfp_flags);
+	if (retval == -ENOMEM)
+enomem:
+		defer_kevent(dev, WORK_RX_MEMORY);
+	if (retval) {
+		DBG(dev, "rx submit --> %d\n", retval);
+		if (skb)
+			dev_kfree_skb_any(skb);
+		spin_lock_irqsave(&dev->req_lock, flags);
+		list_add(&req->list, &dev->rx_reqs);
+		spin_unlock_irqrestore(&dev->req_lock, flags);
+	}
+	return retval;
+}
+
+static void rx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct sk_buff	*skb = req->context, *skb2;
+	struct eth_dev	*dev = ep->driver_data;
+	int		status = req->status;
+
+	switch (status) {
+
+	/* normal completion */
+	case 0:
+		skb_put(skb, req->actual);
+
+		if (dev->unwrap) {
+			unsigned long	flags;
+
+			spin_lock_irqsave(&dev->lock, flags);
+			if (dev->port_usb) {
+				status = dev->unwrap(dev->port_usb,
+							skb,
+							&dev->rx_frames);
+			} else {
+				dev_kfree_skb_any(skb);
+				status = -ENOTCONN;
+			}
+			spin_unlock_irqrestore(&dev->lock, flags);
+		} else {
+			skb_queue_tail(&dev->rx_frames, skb);
+		}
+		skb = NULL;
+
+		skb2 = skb_dequeue(&dev->rx_frames);
+		while (skb2) {
+			if (status < 0
+					|| ETH_HLEN > skb2->len
+					|| skb2->len > GETHER_MAX_ETH_FRAME_LEN) {
+				dev->net->stats.rx_errors++;
+				dev->net->stats.rx_length_errors++;
+				DBG(dev, "rx length %d\n", skb2->len);
+				dev_kfree_skb_any(skb2);
+				goto next_frame;
+			}
+			skb2->protocol = eth_type_trans(skb2, dev->net);
+			dev->net->stats.rx_packets++;
+			dev->net->stats.rx_bytes += skb2->len;
+
+			/* no buffer copies needed, unless hardware can't
+			 * use skb buffers.
+			 */
+			status = netif_rx(skb2);
+next_frame:
+			skb2 = skb_dequeue(&dev->rx_frames);
+		}
+		break;
+
+	/* software-driven interface shutdown */
+	case -ECONNRESET:		/* unlink */
+	case -ESHUTDOWN:		/* disconnect etc */
+		VDBG(dev, "rx shutdown, code %d\n", status);
+		goto quiesce;
+
+	/* for hardware automagic (such as pxa) */
+	case -ECONNABORTED:		/* endpoint reset */
+		DBG(dev, "rx %s reset\n", ep->name);
+		defer_kevent(dev, WORK_RX_MEMORY);
+quiesce:
+		dev_kfree_skb_any(skb);
+		goto clean;
+
+	/* data overrun */
+	case -EOVERFLOW:
+		dev->net->stats.rx_over_errors++;
+		fallthrough;
+
+	default:
+		dev->net->stats.rx_errors++;
+		DBG(dev, "rx status %d\n", status);
+		break;
+	}
+
+	if (skb)
+		dev_kfree_skb_any(skb);
+	if (!netif_running(dev->net)) {
+clean:
+		spin_lock(&dev->req_lock);
+		list_add(&req->list, &dev->rx_reqs);
+		spin_unlock(&dev->req_lock);
+		req = NULL;
+	}
+	if (req)
+		rx_submit(dev, req, GFP_ATOMIC);
+}
+
+static int prealloc(struct list_head *list, struct usb_ep *ep, unsigned n)
+{
+	unsigned		i;
+	struct usb_request	*req;
+
+	if (!n)
+		return -ENOMEM;
+
+	/* queue/recycle up to N requests */
+	i = n;
+	list_for_each_entry(req, list, list) {
+		if (i-- == 0)
+			goto extra;
+	}
+	while (i--) {
+		req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+		if (!req)
+			return list_empty(list) ? -ENOMEM : 0;
+		list_add(&req->list, list);
+	}
+	return 0;
+
+extra:
+	/* free extras */
+	for (;;) {
+		struct list_head	*next;
+
+		next = req->list.next;
+		list_del(&req->list);
+		usb_ep_free_request(ep, req);
+
+		if (next == list)
+			break;
+
+		req = container_of(next, struct usb_request, list);
+	}
+	return 0;
+}
+
+static int alloc_requests(struct eth_dev *dev, struct gether *link, unsigned n)
+{
+	int	status;
+
+	spin_lock(&dev->req_lock);
+	status = prealloc(&dev->tx_reqs, link->in_ep, n);
+	if (status < 0)
+		goto fail;
+	status = prealloc(&dev->rx_reqs, link->out_ep, n);
+	if (status < 0)
+		goto fail;
+	goto done;
+fail:
+	DBG(dev, "can't alloc requests\n");
+done:
+	spin_unlock(&dev->req_lock);
+	return status;
+}
+
+static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags)
+{
+	struct usb_request	*req;
+	unsigned long		flags;
+
+	/* fill unused rxq slots with some skb */
+	spin_lock_irqsave(&dev->req_lock, flags);
+	while (!list_empty(&dev->rx_reqs)) {
+		req = list_first_entry(&dev->rx_reqs, struct usb_request, list);
+		list_del_init(&req->list);
+		spin_unlock_irqrestore(&dev->req_lock, flags);
+
+		if (rx_submit(dev, req, gfp_flags) < 0) {
+			defer_kevent(dev, WORK_RX_MEMORY);
+			return;
+		}
+
+		spin_lock_irqsave(&dev->req_lock, flags);
+	}
+	spin_unlock_irqrestore(&dev->req_lock, flags);
+}
+
+static void eth_work(struct work_struct *work)
+{
+	struct eth_dev	*dev = container_of(work, struct eth_dev, work);
+
+	if (test_and_clear_bit(WORK_RX_MEMORY, &dev->todo)) {
+		if (netif_running(dev->net))
+			rx_fill(dev, GFP_KERNEL);
+	}
+
+	if (dev->todo)
+		DBG(dev, "work done, flags = 0x%lx\n", dev->todo);
+}
+
+static void tx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct sk_buff	*skb = req->context;
+	struct eth_dev	*dev = ep->driver_data;
+
+	switch (req->status) {
+	default:
+		dev->net->stats.tx_errors++;
+		VDBG(dev, "tx err %d\n", req->status);
+		fallthrough;
+	case -ECONNRESET:		/* unlink */
+	case -ESHUTDOWN:		/* disconnect etc */
+		dev_kfree_skb_any(skb);
+		break;
+	case 0:
+		dev->net->stats.tx_bytes += skb->len;
+		dev_consume_skb_any(skb);
+	}
+	dev->net->stats.tx_packets++;
+
+	spin_lock(&dev->req_lock);
+	list_add(&req->list, &dev->tx_reqs);
+	spin_unlock(&dev->req_lock);
+
+	atomic_dec(&dev->tx_qlen);
+	if (netif_carrier_ok(dev->net))
+		netif_wake_queue(dev->net);
+}
+
+static inline int is_promisc(u16 cdc_filter)
+{
+	return cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS;
+}
+
+static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
+					struct net_device *net)
+{
+	struct eth_dev		*dev = netdev_priv(net);
+	int			length = 0;
+	int			retval;
+	struct usb_request	*req = NULL;
+	unsigned long		flags;
+	struct usb_ep		*in;
+	u16			cdc_filter;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->port_usb) {
+		in = dev->port_usb->in_ep;
+		cdc_filter = dev->port_usb->cdc_filter;
+	} else {
+		in = NULL;
+		cdc_filter = 0;
+	}
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	if (!in) {
+		if (skb)
+			dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	/* apply outgoing CDC or RNDIS filters */
+	if (skb && !is_promisc(cdc_filter)) {
+		u8		*dest = skb->data;
+
+		if (is_multicast_ether_addr(dest)) {
+			u16	type;
+
+			/* ignores USB_CDC_PACKET_TYPE_MULTICAST and host
+			 * SET_ETHERNET_MULTICAST_FILTERS requests
+			 */
+			if (is_broadcast_ether_addr(dest))
+				type = USB_CDC_PACKET_TYPE_BROADCAST;
+			else
+				type = USB_CDC_PACKET_TYPE_ALL_MULTICAST;
+			if (!(cdc_filter & type)) {
+				dev_kfree_skb_any(skb);
+				return NETDEV_TX_OK;
+			}
+		}
+		/* ignores USB_CDC_PACKET_TYPE_DIRECTED */
+	}
+
+	spin_lock_irqsave(&dev->req_lock, flags);
+	/*
+	 * this freelist can be empty if an interrupt triggered disconnect()
+	 * and reconfigured the gadget (shutting down this queue) after the
+	 * network stack decided to xmit but before we got the spinlock.
+	 */
+	if (list_empty(&dev->tx_reqs)) {
+		spin_unlock_irqrestore(&dev->req_lock, flags);
+		return NETDEV_TX_BUSY;
+	}
+
+	req = list_first_entry(&dev->tx_reqs, struct usb_request, list);
+	list_del(&req->list);
+
+	/* temporarily stop TX queue when the freelist empties */
+	if (list_empty(&dev->tx_reqs))
+		netif_stop_queue(net);
+	spin_unlock_irqrestore(&dev->req_lock, flags);
+
+	/* no buffer copies needed, unless the network stack did it
+	 * or the hardware can't use skb buffers.
+	 * or there's not enough space for extra headers we need
+	 */
+	if (dev->wrap) {
+		unsigned long	flags;
+
+		spin_lock_irqsave(&dev->lock, flags);
+		if (dev->port_usb)
+			skb = dev->wrap(dev->port_usb, skb);
+		spin_unlock_irqrestore(&dev->lock, flags);
+		if (!skb) {
+			/* Multi frame CDC protocols may store the frame for
+			 * later which is not a dropped frame.
+			 */
+			if (dev->port_usb &&
+					dev->port_usb->supports_multi_frame)
+				goto multiframe;
+			goto drop;
+		}
+	}
+
+	length = skb->len;
+	req->buf = skb->data;
+	req->context = skb;
+	req->complete = tx_complete;
+
+	/* NCM requires no zlp if transfer is dwNtbInMaxSize */
+	if (dev->port_usb &&
+	    dev->port_usb->is_fixed &&
+	    length == dev->port_usb->fixed_in_len &&
+	    (length % in->maxpacket) == 0)
+		req->zero = 0;
+	else
+		req->zero = 1;
+
+	/* use zlp framing on tx for strict CDC-Ether conformance,
+	 * though any robust network rx path ignores extra padding.
+	 * and some hardware doesn't like to write zlps.
+	 */
+	if (req->zero && !dev->zlp && (length % in->maxpacket) == 0)
+		length++;
+
+	req->length = length;
+
+	retval = usb_ep_queue(in, req, GFP_ATOMIC);
+	switch (retval) {
+	default:
+		DBG(dev, "tx queue err %d\n", retval);
+		break;
+	case 0:
+		netif_trans_update(net);
+		atomic_inc(&dev->tx_qlen);
+	}
+
+	if (retval) {
+		dev_kfree_skb_any(skb);
+drop:
+		dev->net->stats.tx_dropped++;
+multiframe:
+		spin_lock_irqsave(&dev->req_lock, flags);
+		if (list_empty(&dev->tx_reqs))
+			netif_start_queue(net);
+		list_add(&req->list, &dev->tx_reqs);
+		spin_unlock_irqrestore(&dev->req_lock, flags);
+	}
+	return NETDEV_TX_OK;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void eth_start(struct eth_dev *dev, gfp_t gfp_flags)
+{
+	DBG(dev, "%s\n", __func__);
+
+	/* fill the rx queue */
+	rx_fill(dev, gfp_flags);
+
+	/* and open the tx floodgates */
+	atomic_set(&dev->tx_qlen, 0);
+	netif_wake_queue(dev->net);
+}
+
+static int eth_open(struct net_device *net)
+{
+	struct eth_dev	*dev = netdev_priv(net);
+	struct gether	*link;
+
+	DBG(dev, "%s\n", __func__);
+	if (netif_carrier_ok(dev->net))
+		eth_start(dev, GFP_KERNEL);
+
+	spin_lock_irq(&dev->lock);
+	link = dev->port_usb;
+	if (link && link->open)
+		link->open(link);
+	spin_unlock_irq(&dev->lock);
+
+	return 0;
+}
+
+static int eth_stop(struct net_device *net)
+{
+	struct eth_dev	*dev = netdev_priv(net);
+	unsigned long	flags;
+
+	VDBG(dev, "%s\n", __func__);
+	netif_stop_queue(net);
+
+	DBG(dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
+		dev->net->stats.rx_packets, dev->net->stats.tx_packets,
+		dev->net->stats.rx_errors, dev->net->stats.tx_errors
+		);
+
+	/* ensure there are no more active requests */
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->port_usb) {
+		struct gether	*link = dev->port_usb;
+		const struct usb_endpoint_descriptor *in;
+		const struct usb_endpoint_descriptor *out;
+
+		if (link->close)
+			link->close(link);
+
+		/* NOTE:  we have no abort-queue primitive we could use
+		 * to cancel all pending I/O.  Instead, we disable then
+		 * reenable the endpoints ... this idiom may leave toggle
+		 * wrong, but that's a self-correcting error.
+		 *
+		 * REVISIT:  we *COULD* just let the transfers complete at
+		 * their own pace; the network stack can handle old packets.
+		 * For the moment we leave this here, since it works.
+		 */
+		in = link->in_ep->desc;
+		out = link->out_ep->desc;
+		usb_ep_disable(link->in_ep);
+		usb_ep_disable(link->out_ep);
+		if (netif_carrier_ok(net)) {
+			DBG(dev, "host still using in/out endpoints\n");
+			link->in_ep->desc = in;
+			link->out_ep->desc = out;
+			usb_ep_enable(link->in_ep);
+			usb_ep_enable(link->out_ep);
+		}
+	}
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int get_ether_addr(const char *str, u8 *dev_addr)
+{
+	if (str) {
+		unsigned	i;
+
+		for (i = 0; i < 6; i++) {
+			unsigned char num;
+
+			if ((*str == '.') || (*str == ':'))
+				str++;
+			num = hex_to_bin(*str++) << 4;
+			num |= hex_to_bin(*str++);
+			dev_addr [i] = num;
+		}
+		if (is_valid_ether_addr(dev_addr))
+			return 0;
+	}
+	eth_random_addr(dev_addr);
+	return 1;
+}
+
+static int get_ether_addr_str(u8 dev_addr[ETH_ALEN], char *str, int len)
+{
+	if (len < 18)
+		return -EINVAL;
+
+	snprintf(str, len, "%pM", dev_addr);
+	return 18;
+}
+
+static const struct net_device_ops eth_netdev_ops = {
+	.ndo_open		= eth_open,
+	.ndo_stop		= eth_stop,
+	.ndo_start_xmit		= eth_start_xmit,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static struct device_type gadget_type = {
+	.name	= "gadget",
+};
+
+/*
+ * gether_setup_name - initialize one ethernet-over-usb link
+ * @g: gadget to associated with these links
+ * @ethaddr: NULL, or a buffer in which the ethernet address of the
+ *	host side of the link is recorded
+ * @netname: name for network device (for example, "usb")
+ * Context: may sleep
+ *
+ * This sets up the single network link that may be exported by a
+ * gadget driver using this framework.  The link layer addresses are
+ * set up using module parameters.
+ *
+ * Returns an eth_dev pointer on success, or an ERR_PTR on failure.
+ */
+struct eth_dev *gether_setup_name(struct usb_gadget *g,
+		const char *dev_addr, const char *host_addr,
+		u8 ethaddr[ETH_ALEN], unsigned qmult, const char *netname)
+{
+	struct eth_dev		*dev;
+	struct net_device	*net;
+	int			status;
+	u8			addr[ETH_ALEN];
+
+	net = alloc_etherdev(sizeof *dev);
+	if (!net)
+		return ERR_PTR(-ENOMEM);
+
+	dev = netdev_priv(net);
+	spin_lock_init(&dev->lock);
+	spin_lock_init(&dev->req_lock);
+	INIT_WORK(&dev->work, eth_work);
+	INIT_LIST_HEAD(&dev->tx_reqs);
+	INIT_LIST_HEAD(&dev->rx_reqs);
+
+	skb_queue_head_init(&dev->rx_frames);
+
+	/* network device setup */
+	dev->net = net;
+	dev->qmult = qmult;
+	snprintf(net->name, sizeof(net->name), "%s%%d", netname);
+
+	if (get_ether_addr(dev_addr, addr)) {
+		net->addr_assign_type = NET_ADDR_RANDOM;
+		dev_warn(&g->dev,
+			"using random %s ethernet address\n", "self");
+	} else {
+		net->addr_assign_type = NET_ADDR_SET;
+	}
+	eth_hw_addr_set(net, addr);
+	if (get_ether_addr(host_addr, dev->host_mac))
+		dev_warn(&g->dev,
+			"using random %s ethernet address\n", "host");
+
+	if (ethaddr)
+		memcpy(ethaddr, dev->host_mac, ETH_ALEN);
+
+	net->netdev_ops = &eth_netdev_ops;
+
+	net->ethtool_ops = &ops;
+
+	/* MTU range: 14 - 15412 */
+	net->min_mtu = ETH_HLEN;
+	net->max_mtu = GETHER_MAX_MTU_SIZE;
+
+	dev->gadget = g;
+	SET_NETDEV_DEV(net, &g->dev);
+	SET_NETDEV_DEVTYPE(net, &gadget_type);
+
+	status = register_netdev(net);
+	if (status < 0) {
+		dev_dbg(&g->dev, "register_netdev failed, %d\n", status);
+		free_netdev(net);
+		dev = ERR_PTR(status);
+	} else {
+		INFO(dev, "MAC %pM\n", net->dev_addr);
+		INFO(dev, "HOST MAC %pM\n", dev->host_mac);
+
+		/*
+		 * two kinds of host-initiated state changes:
+		 *  - iff DATA transfer is active, carrier is "on"
+		 *  - tx queueing enabled if open *and* carrier is "on"
+		 */
+		netif_carrier_off(net);
+	}
+
+	return dev;
+}
+EXPORT_SYMBOL_GPL(gether_setup_name);
+
+struct net_device *gether_setup_name_default(const char *netname)
+{
+	struct net_device	*net;
+	struct eth_dev		*dev;
+
+	net = alloc_etherdev(sizeof(*dev));
+	if (!net)
+		return ERR_PTR(-ENOMEM);
+
+	dev = netdev_priv(net);
+	spin_lock_init(&dev->lock);
+	spin_lock_init(&dev->req_lock);
+	INIT_WORK(&dev->work, eth_work);
+	INIT_LIST_HEAD(&dev->tx_reqs);
+	INIT_LIST_HEAD(&dev->rx_reqs);
+
+	skb_queue_head_init(&dev->rx_frames);
+
+	/* network device setup */
+	dev->net = net;
+	dev->qmult = QMULT_DEFAULT;
+	snprintf(net->name, sizeof(net->name), "%s%%d", netname);
+
+	eth_random_addr(dev->dev_mac);
+	pr_warn("using random %s ethernet address\n", "self");
+
+	/* by default we always have a random MAC address */
+	net->addr_assign_type = NET_ADDR_RANDOM;
+
+	eth_random_addr(dev->host_mac);
+	pr_warn("using random %s ethernet address\n", "host");
+
+	net->netdev_ops = &eth_netdev_ops;
+
+	net->ethtool_ops = &ops;
+	SET_NETDEV_DEVTYPE(net, &gadget_type);
+
+	/* MTU range: 14 - 15412 */
+	net->min_mtu = ETH_HLEN;
+	net->max_mtu = GETHER_MAX_MTU_SIZE;
+
+	return net;
+}
+EXPORT_SYMBOL_GPL(gether_setup_name_default);
+
+int gether_register_netdev(struct net_device *net)
+{
+	struct eth_dev *dev;
+	struct usb_gadget *g;
+	int status;
+
+	if (!net->dev.parent)
+		return -EINVAL;
+	dev = netdev_priv(net);
+	g = dev->gadget;
+
+	eth_hw_addr_set(net, dev->dev_mac);
+
+	status = register_netdev(net);
+	if (status < 0) {
+		dev_dbg(&g->dev, "register_netdev failed, %d\n", status);
+		return status;
+	} else {
+		INFO(dev, "HOST MAC %pM\n", dev->host_mac);
+		INFO(dev, "MAC %pM\n", dev->dev_mac);
+
+		/* two kinds of host-initiated state changes:
+		 *  - iff DATA transfer is active, carrier is "on"
+		 *  - tx queueing enabled if open *and* carrier is "on"
+		 */
+		netif_carrier_off(net);
+	}
+
+	return status;
+}
+EXPORT_SYMBOL_GPL(gether_register_netdev);
+
+void gether_set_gadget(struct net_device *net, struct usb_gadget *g)
+{
+	struct eth_dev *dev;
+
+	dev = netdev_priv(net);
+	dev->gadget = g;
+	SET_NETDEV_DEV(net, &g->dev);
+}
+EXPORT_SYMBOL_GPL(gether_set_gadget);
+
+int gether_set_dev_addr(struct net_device *net, const char *dev_addr)
+{
+	struct eth_dev *dev;
+	u8 new_addr[ETH_ALEN];
+
+	dev = netdev_priv(net);
+	if (get_ether_addr(dev_addr, new_addr))
+		return -EINVAL;
+	memcpy(dev->dev_mac, new_addr, ETH_ALEN);
+	net->addr_assign_type = NET_ADDR_SET;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gether_set_dev_addr);
+
+int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len)
+{
+	struct eth_dev *dev;
+	int ret;
+
+	dev = netdev_priv(net);
+	ret = get_ether_addr_str(dev->dev_mac, dev_addr, len);
+	if (ret + 1 < len) {
+		dev_addr[ret++] = '\n';
+		dev_addr[ret] = '\0';
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gether_get_dev_addr);
+
+int gether_set_host_addr(struct net_device *net, const char *host_addr)
+{
+	struct eth_dev *dev;
+	u8 new_addr[ETH_ALEN];
+
+	dev = netdev_priv(net);
+	if (get_ether_addr(host_addr, new_addr))
+		return -EINVAL;
+	memcpy(dev->host_mac, new_addr, ETH_ALEN);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gether_set_host_addr);
+
+int gether_get_host_addr(struct net_device *net, char *host_addr, int len)
+{
+	struct eth_dev *dev;
+	int ret;
+
+	dev = netdev_priv(net);
+	ret = get_ether_addr_str(dev->host_mac, host_addr, len);
+	if (ret + 1 < len) {
+		host_addr[ret++] = '\n';
+		host_addr[ret] = '\0';
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gether_get_host_addr);
+
+int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len)
+{
+	struct eth_dev *dev;
+
+	if (len < 13)
+		return -EINVAL;
+
+	dev = netdev_priv(net);
+	snprintf(host_addr, len, "%pm", dev->host_mac);
+
+	string_upper(host_addr, host_addr);
+
+	return strlen(host_addr);
+}
+EXPORT_SYMBOL_GPL(gether_get_host_addr_cdc);
+
+void gether_get_host_addr_u8(struct net_device *net, u8 host_mac[ETH_ALEN])
+{
+	struct eth_dev *dev;
+
+	dev = netdev_priv(net);
+	memcpy(host_mac, dev->host_mac, ETH_ALEN);
+}
+EXPORT_SYMBOL_GPL(gether_get_host_addr_u8);
+
+void gether_set_qmult(struct net_device *net, unsigned qmult)
+{
+	struct eth_dev *dev;
+
+	dev = netdev_priv(net);
+	dev->qmult = qmult;
+}
+EXPORT_SYMBOL_GPL(gether_set_qmult);
+
+unsigned gether_get_qmult(struct net_device *net)
+{
+	struct eth_dev *dev;
+
+	dev = netdev_priv(net);
+	return dev->qmult;
+}
+EXPORT_SYMBOL_GPL(gether_get_qmult);
+
+int gether_get_ifname(struct net_device *net, char *name, int len)
+{
+	struct eth_dev *dev = netdev_priv(net);
+	int ret;
+
+	rtnl_lock();
+	ret = scnprintf(name, len, "%s\n",
+			dev->ifname_set ? net->name : netdev_name(net));
+	rtnl_unlock();
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gether_get_ifname);
+
+int gether_set_ifname(struct net_device *net, const char *name, int len)
+{
+	struct eth_dev *dev = netdev_priv(net);
+	char tmp[IFNAMSIZ];
+	const char *p;
+
+	if (name[len - 1] == '\n')
+		len--;
+
+	if (len >= sizeof(tmp))
+		return -E2BIG;
+
+	strscpy(tmp, name, len + 1);
+	if (!dev_valid_name(tmp))
+		return -EINVAL;
+
+	/* Require exactly one %d, so binding will not fail with EEXIST. */
+	p = strchr(name, '%');
+	if (!p || p[1] != 'd' || strchr(p + 2, '%'))
+		return -EINVAL;
+
+	strncpy(net->name, tmp, sizeof(net->name));
+	dev->ifname_set = true;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gether_set_ifname);
+
+/*
+ * gether_cleanup - remove Ethernet-over-USB device
+ * Context: may sleep
+ *
+ * This is called to free all resources allocated by @gether_setup().
+ */
+void gether_cleanup(struct eth_dev *dev)
+{
+	if (!dev)
+		return;
+
+	unregister_netdev(dev->net);
+	flush_work(&dev->work);
+	free_netdev(dev->net);
+}
+EXPORT_SYMBOL_GPL(gether_cleanup);
+
+/**
+ * gether_connect - notify network layer that USB link is active
+ * @link: the USB link, set up with endpoints, descriptors matching
+ *	current device speed, and any framing wrapper(s) set up.
+ * Context: irqs blocked
+ *
+ * This is called to activate endpoints and let the network layer know
+ * the connection is active ("carrier detect").  It may cause the I/O
+ * queues to open and start letting network packets flow, but will in
+ * any case activate the endpoints so that they respond properly to the
+ * USB host.
+ *
+ * Verify net_device pointer returned using IS_ERR().  If it doesn't
+ * indicate some error code (negative errno), ep->driver_data values
+ * have been overwritten.
+ */
+struct net_device *gether_connect(struct gether *link)
+{
+	struct eth_dev		*dev = link->ioport;
+	int			result = 0;
+
+	if (!dev)
+		return ERR_PTR(-EINVAL);
+
+	link->in_ep->driver_data = dev;
+	result = usb_ep_enable(link->in_ep);
+	if (result != 0) {
+		DBG(dev, "enable %s --> %d\n",
+			link->in_ep->name, result);
+		goto fail0;
+	}
+
+	link->out_ep->driver_data = dev;
+	result = usb_ep_enable(link->out_ep);
+	if (result != 0) {
+		DBG(dev, "enable %s --> %d\n",
+			link->out_ep->name, result);
+		goto fail1;
+	}
+
+	if (result == 0)
+		result = alloc_requests(dev, link, qlen(dev->gadget,
+					dev->qmult));
+
+	if (result == 0) {
+		dev->zlp = link->is_zlp_ok;
+		dev->no_skb_reserve = gadget_avoids_skb_reserve(dev->gadget);
+		DBG(dev, "qlen %d\n", qlen(dev->gadget, dev->qmult));
+
+		dev->header_len = link->header_len;
+		dev->unwrap = link->unwrap;
+		dev->wrap = link->wrap;
+
+		spin_lock(&dev->lock);
+		dev->port_usb = link;
+		if (netif_running(dev->net)) {
+			if (link->open)
+				link->open(link);
+		} else {
+			if (link->close)
+				link->close(link);
+		}
+		spin_unlock(&dev->lock);
+
+		netif_carrier_on(dev->net);
+		if (netif_running(dev->net))
+			eth_start(dev, GFP_ATOMIC);
+
+	/* on error, disable any endpoints  */
+	} else {
+		(void) usb_ep_disable(link->out_ep);
+fail1:
+		(void) usb_ep_disable(link->in_ep);
+	}
+fail0:
+	/* caller is responsible for cleanup on error */
+	if (result < 0)
+		return ERR_PTR(result);
+	return dev->net;
+}
+EXPORT_SYMBOL_GPL(gether_connect);
+
+/**
+ * gether_disconnect - notify network layer that USB link is inactive
+ * @link: the USB link, on which gether_connect() was called
+ * Context: irqs blocked
+ *
+ * This is called to deactivate endpoints and let the network layer know
+ * the connection went inactive ("no carrier").
+ *
+ * On return, the state is as if gether_connect() had never been called.
+ * The endpoints are inactive, and accordingly without active USB I/O.
+ * Pointers to endpoint descriptors and endpoint private data are nulled.
+ */
+void gether_disconnect(struct gether *link)
+{
+	struct eth_dev		*dev = link->ioport;
+	struct usb_request	*req;
+
+	WARN_ON(!dev);
+	if (!dev)
+		return;
+
+	DBG(dev, "%s\n", __func__);
+
+	netif_stop_queue(dev->net);
+	netif_carrier_off(dev->net);
+
+	/* disable endpoints, forcing (synchronous) completion
+	 * of all pending i/o.  then free the request objects
+	 * and forget about the endpoints.
+	 */
+	usb_ep_disable(link->in_ep);
+	spin_lock(&dev->req_lock);
+	while (!list_empty(&dev->tx_reqs)) {
+		req = list_first_entry(&dev->tx_reqs, struct usb_request, list);
+		list_del(&req->list);
+
+		spin_unlock(&dev->req_lock);
+		usb_ep_free_request(link->in_ep, req);
+		spin_lock(&dev->req_lock);
+	}
+	spin_unlock(&dev->req_lock);
+	link->in_ep->desc = NULL;
+
+	usb_ep_disable(link->out_ep);
+	spin_lock(&dev->req_lock);
+	while (!list_empty(&dev->rx_reqs)) {
+		req = list_first_entry(&dev->rx_reqs, struct usb_request, list);
+		list_del(&req->list);
+
+		spin_unlock(&dev->req_lock);
+		usb_ep_free_request(link->out_ep, req);
+		spin_lock(&dev->req_lock);
+	}
+	spin_unlock(&dev->req_lock);
+	link->out_ep->desc = NULL;
+
+	/* finish forgetting about this USB link episode */
+	dev->header_len = 0;
+	dev->unwrap = NULL;
+	dev->wrap = NULL;
+
+	spin_lock(&dev->lock);
+	dev->port_usb = NULL;
+	spin_unlock(&dev->lock);
+}
+EXPORT_SYMBOL_GPL(gether_disconnect);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");
diff --git a/drivers/usb/gadget/function/u_ether.h b/drivers/usb/gadget/function/u_ether.h
new file mode 100644
index 000000000..40144546d
--- /dev/null
+++ b/drivers/usb/gadget/function/u_ether.h
@@ -0,0 +1,278 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * u_ether.h -- interface to USB gadget "ethernet link" utilities
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
+ */
+
+#ifndef __U_ETHER_H
+#define __U_ETHER_H
+
+#include <linux/err.h>
+#include <linux/if_ether.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/cdc.h>
+#include <linux/netdevice.h>
+
+#define QMULT_DEFAULT 5
+
+/*
+ * dev_addr: initial value
+ * changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx"
+ * host_addr: this address is invisible to ifconfig
+ */
+#define USB_ETHERNET_MODULE_PARAMETERS() \
+	static unsigned qmult = QMULT_DEFAULT;				\
+	module_param(qmult, uint, S_IRUGO|S_IWUSR);			\
+	MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed");\
+									\
+	static char *dev_addr;						\
+	module_param(dev_addr, charp, S_IRUGO);				\
+	MODULE_PARM_DESC(dev_addr, "Device Ethernet Address");		\
+									\
+	static char *host_addr;						\
+	module_param(host_addr, charp, S_IRUGO);			\
+	MODULE_PARM_DESC(host_addr, "Host Ethernet Address")
+
+struct eth_dev;
+
+/*
+ * This represents the USB side of an "ethernet" link, managed by a USB
+ * function which provides control and (maybe) framing.  Two functions
+ * in different configurations could share the same ethernet link/netdev,
+ * using different host interaction models.
+ *
+ * There is a current limitation that only one instance of this link may
+ * be present in any given configuration.  When that's a problem, network
+ * layer facilities can be used to package multiple logical links on this
+ * single "physical" one.
+ */
+struct gether {
+	struct usb_function		func;
+
+	/* updated by gether_{connect,disconnect} */
+	struct eth_dev			*ioport;
+
+	/* endpoints handle full and/or high speeds */
+	struct usb_ep			*in_ep;
+	struct usb_ep			*out_ep;
+
+	bool				is_zlp_ok;
+
+	u16				cdc_filter;
+
+	/* hooks for added framing, as needed for RNDIS and EEM. */
+	u32				header_len;
+	/* NCM requires fixed size bundles */
+	bool				is_fixed;
+	u32				fixed_out_len;
+	u32				fixed_in_len;
+	bool				supports_multi_frame;
+	struct sk_buff			*(*wrap)(struct gether *port,
+						struct sk_buff *skb);
+	int				(*unwrap)(struct gether *port,
+						struct sk_buff *skb,
+						struct sk_buff_head *list);
+
+	/* called on network open/close */
+	void				(*open)(struct gether *);
+	void				(*close)(struct gether *);
+};
+
+#define	DEFAULT_FILTER	(USB_CDC_PACKET_TYPE_BROADCAST \
+			|USB_CDC_PACKET_TYPE_ALL_MULTICAST \
+			|USB_CDC_PACKET_TYPE_PROMISCUOUS \
+			|USB_CDC_PACKET_TYPE_DIRECTED)
+
+/* variant of gether_setup that allows customizing network device name */
+struct eth_dev *gether_setup_name(struct usb_gadget *g,
+		const char *dev_addr, const char *host_addr,
+		u8 ethaddr[ETH_ALEN], unsigned qmult, const char *netname);
+
+/* netdev setup/teardown as directed by the gadget driver */
+/* gether_setup - initialize one ethernet-over-usb link
+ * @g: gadget to associated with these links
+ * @ethaddr: NULL, or a buffer in which the ethernet address of the
+ *	host side of the link is recorded
+ * Context: may sleep
+ *
+ * This sets up the single network link that may be exported by a
+ * gadget driver using this framework.  The link layer addresses are
+ * set up using module parameters.
+ *
+ * Returns a eth_dev pointer on success, or an ERR_PTR on failure
+ */
+static inline struct eth_dev *gether_setup(struct usb_gadget *g,
+		const char *dev_addr, const char *host_addr,
+		u8 ethaddr[ETH_ALEN], unsigned qmult)
+{
+	return gether_setup_name(g, dev_addr, host_addr, ethaddr, qmult, "usb");
+}
+
+/*
+ * variant of gether_setup_default that allows customizing
+ * network device name
+ */
+struct net_device *gether_setup_name_default(const char *netname);
+
+/*
+ * gether_register_netdev - register the net device
+ * @net: net device to register
+ *
+ * Registers the net device associated with this ethernet-over-usb link
+ *
+ */
+int gether_register_netdev(struct net_device *net);
+
+/* gether_setup_default - initialize one ethernet-over-usb link
+ * Context: may sleep
+ *
+ * This sets up the single network link that may be exported by a
+ * gadget driver using this framework.  The link layer addresses
+ * are set to random values.
+ *
+ * Returns negative errno, or zero on success
+ */
+static inline struct net_device *gether_setup_default(void)
+{
+	return gether_setup_name_default("usb");
+}
+
+/**
+ * gether_set_gadget - initialize one ethernet-over-usb link with a gadget
+ * @net: device representing this link
+ * @g: the gadget to initialize with
+ *
+ * This associates one ethernet-over-usb link with a gadget.
+ */
+void gether_set_gadget(struct net_device *net, struct usb_gadget *g);
+
+/**
+ * gether_set_dev_addr - initialize an ethernet-over-usb link with eth address
+ * @net: device representing this link
+ * @dev_addr: eth address of this device
+ *
+ * This sets the device-side Ethernet address of this ethernet-over-usb link
+ * if dev_addr is correct.
+ * Returns negative errno if the new address is incorrect.
+ */
+int gether_set_dev_addr(struct net_device *net, const char *dev_addr);
+
+/**
+ * gether_get_dev_addr - get an ethernet-over-usb link eth address
+ * @net: device representing this link
+ * @dev_addr: place to store device's eth address
+ * @len: length of the @dev_addr buffer
+ *
+ * This gets the device-side Ethernet address of this ethernet-over-usb link.
+ * Returns zero on success, else negative errno.
+ */
+int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len);
+
+/**
+ * gether_set_host_addr - initialize an ethernet-over-usb link with host address
+ * @net: device representing this link
+ * @host_addr: eth address of the host
+ *
+ * This sets the host-side Ethernet address of this ethernet-over-usb link
+ * if host_addr is correct.
+ * Returns negative errno if the new address is incorrect.
+ */
+int gether_set_host_addr(struct net_device *net, const char *host_addr);
+
+/**
+ * gether_get_host_addr - get an ethernet-over-usb link host address
+ * @net: device representing this link
+ * @host_addr: place to store eth address of the host
+ * @len: length of the @host_addr buffer
+ *
+ * This gets the host-side Ethernet address of this ethernet-over-usb link.
+ * Returns zero on success, else negative errno.
+ */
+int gether_get_host_addr(struct net_device *net, char *host_addr, int len);
+
+/**
+ * gether_get_host_addr_cdc - get an ethernet-over-usb link host address
+ * @net: device representing this link
+ * @host_addr: place to store eth address of the host
+ * @len: length of the @host_addr buffer
+ *
+ * This gets the CDC formatted host-side Ethernet address of this
+ * ethernet-over-usb link.
+ * Returns zero on success, else negative errno.
+ */
+int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len);
+
+/**
+ * gether_get_host_addr_u8 - get an ethernet-over-usb link host address
+ * @net: device representing this link
+ * @host_mac: place to store the eth address of the host
+ *
+ * This gets the binary formatted host-side Ethernet address of this
+ * ethernet-over-usb link.
+ */
+void gether_get_host_addr_u8(struct net_device *net, u8 host_mac[ETH_ALEN]);
+
+/**
+ * gether_set_qmult - initialize an ethernet-over-usb link with a multiplier
+ * @net: device representing this link
+ * @qmult: queue multiplier
+ *
+ * This sets the queue length multiplier of this ethernet-over-usb link.
+ * For higher speeds use longer queues.
+ */
+void gether_set_qmult(struct net_device *net, unsigned qmult);
+
+/**
+ * gether_get_qmult - get an ethernet-over-usb link multiplier
+ * @net: device representing this link
+ *
+ * This gets the queue length multiplier of this ethernet-over-usb link.
+ */
+unsigned gether_get_qmult(struct net_device *net);
+
+/**
+ * gether_get_ifname - get an ethernet-over-usb link interface name
+ * @net: device representing this link
+ * @name: place to store the interface name
+ * @len: length of the @name buffer
+ *
+ * This gets the interface name of this ethernet-over-usb link.
+ * Returns zero on success, else negative errno.
+ */
+int gether_get_ifname(struct net_device *net, char *name, int len);
+
+/**
+ * gether_set_ifname - set an ethernet-over-usb link interface name
+ * @net: device representing this link
+ * @name: new interface name
+ * @len: length of @name
+ *
+ * This sets the interface name of this ethernet-over-usb link.
+ * A single terminating newline, if any, is ignored.
+ * Returns zero on success, else negative errno.
+ */
+int gether_set_ifname(struct net_device *net, const char *name, int len);
+
+void gether_cleanup(struct eth_dev *dev);
+
+/* connect/disconnect is handled by individual functions */
+struct net_device *gether_connect(struct gether *);
+void gether_disconnect(struct gether *);
+
+/* Some controllers can't support CDC Ethernet (ECM) ... */
+static inline bool can_support_ecm(struct usb_gadget *gadget)
+{
+	if (!gadget_is_altset_supported(gadget))
+		return false;
+
+	/* Everything else is *presumably* fine ... but this is a bit
+	 * chancy, so be **CERTAIN** there are no hardware issues with
+	 * your controller.  Add it above if it can't handle CDC.
+	 */
+	return true;
+}
+
+#endif /* __U_ETHER_H */
diff --git a/drivers/usb/gadget/function/u_ether_configfs.h b/drivers/usb/gadget/function/u_ether_configfs.h
new file mode 100644
index 000000000..f558c3139
--- /dev/null
+++ b/drivers/usb/gadget/function/u_ether_configfs.h
@@ -0,0 +1,200 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * u_ether_configfs.h
+ *
+ * Utility definitions for configfs support in USB Ethernet functions
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#ifndef __U_ETHER_CONFIGFS_H
+#define __U_ETHER_CONFIGFS_H
+
+#define USB_ETHERNET_CONFIGFS_ITEM(_f_)					\
+	static void _f_##_attr_release(struct config_item *item)	\
+	{								\
+		struct f_##_f_##_opts *opts = to_f_##_f_##_opts(item);	\
+									\
+		usb_put_function_instance(&opts->func_inst);		\
+	}								\
+									\
+	static struct configfs_item_operations _f_##_item_ops = {	\
+		.release	= _f_##_attr_release,			\
+	}
+
+#define USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(_f_)			\
+	static ssize_t _f_##_opts_dev_addr_show(struct config_item *item, \
+						char *page)		\
+	{								\
+		struct f_##_f_##_opts *opts = to_f_##_f_##_opts(item);	\
+		int result;						\
+									\
+		mutex_lock(&opts->lock);				\
+		result = gether_get_dev_addr(opts->net, page, PAGE_SIZE); \
+		mutex_unlock(&opts->lock);				\
+									\
+		return result;						\
+	}								\
+									\
+	static ssize_t _f_##_opts_dev_addr_store(struct config_item *item, \
+						 const char *page, size_t len)\
+	{								\
+		struct f_##_f_##_opts *opts = to_f_##_f_##_opts(item);	\
+		int ret;						\
+									\
+		mutex_lock(&opts->lock);				\
+		if (opts->refcnt) {					\
+			mutex_unlock(&opts->lock);			\
+			return -EBUSY;					\
+		}							\
+									\
+		ret = gether_set_dev_addr(opts->net, page);		\
+		mutex_unlock(&opts->lock);				\
+		if (!ret)						\
+			ret = len;					\
+		return ret;						\
+	}								\
+									\
+	CONFIGFS_ATTR(_f_##_opts_, dev_addr)
+
+#define USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(_f_)			\
+	static ssize_t _f_##_opts_host_addr_show(struct config_item *item, \
+						 char *page)		\
+	{								\
+		struct f_##_f_##_opts *opts = to_f_##_f_##_opts(item);	\
+		int result;						\
+									\
+		mutex_lock(&opts->lock);				\
+		result = gether_get_host_addr(opts->net, page, PAGE_SIZE); \
+		mutex_unlock(&opts->lock);				\
+									\
+		return result;						\
+	}								\
+									\
+	static ssize_t _f_##_opts_host_addr_store(struct config_item *item, \
+						  const char *page, size_t len)\
+	{								\
+		struct f_##_f_##_opts *opts = to_f_##_f_##_opts(item);	\
+		int ret;						\
+									\
+		mutex_lock(&opts->lock);				\
+		if (opts->refcnt) {					\
+			mutex_unlock(&opts->lock);			\
+			return -EBUSY;					\
+		}							\
+									\
+		ret = gether_set_host_addr(opts->net, page);		\
+		mutex_unlock(&opts->lock);				\
+		if (!ret)						\
+			ret = len;					\
+		return ret;						\
+	}								\
+									\
+	CONFIGFS_ATTR(_f_##_opts_, host_addr)
+
+#define USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(_f_)			\
+	static ssize_t _f_##_opts_qmult_show(struct config_item *item,	\
+					     char *page)		\
+	{								\
+		struct f_##_f_##_opts *opts = to_f_##_f_##_opts(item);	\
+		unsigned qmult;						\
+									\
+		mutex_lock(&opts->lock);				\
+		qmult = gether_get_qmult(opts->net);			\
+		mutex_unlock(&opts->lock);				\
+		return sprintf(page, "%d\n", qmult);			\
+	}								\
+									\
+	static ssize_t _f_##_opts_qmult_store(struct config_item *item, \
+					      const char *page, size_t len)\
+	{								\
+		struct f_##_f_##_opts *opts = to_f_##_f_##_opts(item);	\
+		u8 val;							\
+		int ret;						\
+									\
+		mutex_lock(&opts->lock);				\
+		if (opts->refcnt) {					\
+			ret = -EBUSY;					\
+			goto out;					\
+		}							\
+									\
+		ret = kstrtou8(page, 0, &val);				\
+		if (ret)						\
+			goto out;					\
+									\
+		gether_set_qmult(opts->net, val);			\
+		ret = len;						\
+out:									\
+		mutex_unlock(&opts->lock);				\
+		return ret;						\
+	}								\
+									\
+	CONFIGFS_ATTR(_f_##_opts_, qmult)
+
+#define USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(_f_)			\
+	static ssize_t _f_##_opts_ifname_show(struct config_item *item, \
+					      char *page)		\
+	{								\
+		struct f_##_f_##_opts *opts = to_f_##_f_##_opts(item);	\
+		int ret;						\
+									\
+		mutex_lock(&opts->lock);				\
+		ret = gether_get_ifname(opts->net, page, PAGE_SIZE);	\
+		mutex_unlock(&opts->lock);				\
+									\
+		return ret;						\
+	}								\
+									\
+	static ssize_t _f_##_opts_ifname_store(struct config_item *item, \
+					       const char *page, size_t len)\
+	{								\
+		struct f_##_f_##_opts *opts = to_f_##_f_##_opts(item);	\
+		int ret = -EBUSY;					\
+									\
+		mutex_lock(&opts->lock);				\
+		if (!opts->refcnt)					\
+			ret = gether_set_ifname(opts->net, page, len);	\
+		mutex_unlock(&opts->lock);				\
+		return ret ?: len;					\
+	}								\
+									\
+	CONFIGFS_ATTR(_f_##_opts_, ifname)
+
+#define USB_ETHER_CONFIGFS_ITEM_ATTR_U8_RW(_f_, _n_)			\
+	static ssize_t _f_##_opts_##_n_##_show(struct config_item *item,\
+					       char *page)		\
+	{								\
+		struct f_##_f_##_opts *opts = to_f_##_f_##_opts(item);	\
+		int ret;						\
+									\
+		mutex_lock(&opts->lock);				\
+		ret = sprintf(page, "%02x\n", opts->_n_);		\
+		mutex_unlock(&opts->lock);				\
+									\
+		return ret;						\
+	}								\
+									\
+	static ssize_t _f_##_opts_##_n_##_store(struct config_item *item,\
+						const char *page,	\
+						size_t len)		\
+	{								\
+		struct f_##_f_##_opts *opts = to_f_##_f_##_opts(item);	\
+		int ret = -EINVAL;					\
+		u8 val;							\
+									\
+		mutex_lock(&opts->lock);				\
+		if (sscanf(page, "%02hhx", &val) > 0) {			\
+			opts->_n_ = val;				\
+			ret = len;					\
+		}							\
+		mutex_unlock(&opts->lock);				\
+									\
+		return ret;						\
+	}								\
+									\
+	CONFIGFS_ATTR(_f_##_opts_, _n_)
+
+#endif /* __U_ETHER_CONFIGFS_H */
diff --git a/drivers/usb/gadget/function/u_fs.h b/drivers/usb/gadget/function/u_fs.h
new file mode 100644
index 000000000..f102ec23f
--- /dev/null
+++ b/drivers/usb/gadget/function/u_fs.h
@@ -0,0 +1,303 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * u_fs.h
+ *
+ * Utility definitions for the FunctionFS
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#ifndef U_FFS_H
+#define U_FFS_H
+
+#include <linux/usb/composite.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/refcount.h>
+
+#ifdef VERBOSE_DEBUG
+#ifndef pr_vdebug
+#  define pr_vdebug pr_debug
+#endif /* pr_vdebug */
+#  define ffs_dump_mem(prefix, ptr, len) \
+	print_hex_dump_bytes(pr_fmt(prefix ": "), DUMP_PREFIX_NONE, ptr, len)
+#else
+#ifndef pr_vdebug
+#  define pr_vdebug(...)                 do { } while (0)
+#endif /* pr_vdebug */
+#  define ffs_dump_mem(prefix, ptr, len) do { } while (0)
+#endif /* VERBOSE_DEBUG */
+
+#define ENTER()    pr_vdebug("%s()\n", __func__)
+
+struct f_fs_opts;
+
+struct ffs_dev {
+	struct ffs_data *ffs_data;
+	struct f_fs_opts *opts;
+	struct list_head entry;
+
+	char name[41];
+
+	bool mounted;
+	bool desc_ready;
+	bool single;
+
+	int (*ffs_ready_callback)(struct ffs_data *ffs);
+	void (*ffs_closed_callback)(struct ffs_data *ffs);
+	void *(*ffs_acquire_dev_callback)(struct ffs_dev *dev);
+	void (*ffs_release_dev_callback)(struct ffs_dev *dev);
+};
+
+extern struct mutex ffs_lock;
+
+static inline void ffs_dev_lock(void)
+{
+	mutex_lock(&ffs_lock);
+}
+
+static inline void ffs_dev_unlock(void)
+{
+	mutex_unlock(&ffs_lock);
+}
+
+int ffs_name_dev(struct ffs_dev *dev, const char *name);
+int ffs_single_dev(struct ffs_dev *dev);
+
+struct ffs_epfile;
+struct ffs_function;
+
+enum ffs_state {
+	/*
+	 * Waiting for descriptors and strings.
+	 *
+	 * In this state no open(2), read(2) or write(2) on epfiles
+	 * may succeed (which should not be the problem as there
+	 * should be no such files opened in the first place).
+	 */
+	FFS_READ_DESCRIPTORS,
+	FFS_READ_STRINGS,
+
+	/*
+	 * We've got descriptors and strings.  We are or have called
+	 * functionfs_ready_callback().  functionfs_bind() may have
+	 * been called but we don't know.
+	 *
+	 * This is the only state in which operations on epfiles may
+	 * succeed.
+	 */
+	FFS_ACTIVE,
+
+	/*
+	 * Function is visible to host, but it's not functional. All
+	 * setup requests are stalled and transfers on another endpoints
+	 * are refused. All epfiles, except ep0, are deleted so there
+	 * is no way to perform any operations on them.
+	 *
+	 * This state is set after closing all functionfs files, when
+	 * mount parameter "no_disconnect=1" has been set. Function will
+	 * remain in deactivated state until filesystem is umounted or
+	 * ep0 is opened again. In the second case functionfs state will
+	 * be reset, and it will be ready for descriptors and strings
+	 * writing.
+	 *
+	 * This is useful only when functionfs is composed to gadget
+	 * with another function which can perform some critical
+	 * operations, and it's strongly desired to have this operations
+	 * completed, even after functionfs files closure.
+	 */
+	FFS_DEACTIVATED,
+
+	/*
+	 * All endpoints have been closed.  This state is also set if
+	 * we encounter an unrecoverable error.  The only
+	 * unrecoverable error is situation when after reading strings
+	 * from user space we fail to initialise epfiles or
+	 * functionfs_ready_callback() returns with error (<0).
+	 *
+	 * In this state no open(2), read(2) or write(2) (both on ep0
+	 * as well as epfile) may succeed (at this point epfiles are
+	 * unlinked and all closed so this is not a problem; ep0 is
+	 * also closed but ep0 file exists and so open(2) on ep0 must
+	 * fail).
+	 */
+	FFS_CLOSING
+};
+
+enum ffs_setup_state {
+	/* There is no setup request pending. */
+	FFS_NO_SETUP,
+	/*
+	 * User has read events and there was a setup request event
+	 * there.  The next read/write on ep0 will handle the
+	 * request.
+	 */
+	FFS_SETUP_PENDING,
+	/*
+	 * There was event pending but before user space handled it
+	 * some other event was introduced which canceled existing
+	 * setup.  If this state is set read/write on ep0 return
+	 * -EIDRM.  This state is only set when adding event.
+	 */
+	FFS_SETUP_CANCELLED
+};
+
+struct ffs_data {
+	struct usb_gadget		*gadget;
+
+	/*
+	 * Protect access read/write operations, only one read/write
+	 * at a time.  As a consequence protects ep0req and company.
+	 * While setup request is being processed (queued) this is
+	 * held.
+	 */
+	struct mutex			mutex;
+
+	/*
+	 * Protect access to endpoint related structures (basically
+	 * usb_ep_queue(), usb_ep_dequeue(), etc. calls) except for
+	 * endpoint zero.
+	 */
+	spinlock_t			eps_lock;
+
+	/*
+	 * XXX REVISIT do we need our own request? Since we are not
+	 * handling setup requests immediately user space may be so
+	 * slow that another setup will be sent to the gadget but this
+	 * time not to us but another function and then there could be
+	 * a race.  Is that the case? Or maybe we can use cdev->req
+	 * after all, maybe we just need some spinlock for that?
+	 */
+	struct usb_request		*ep0req;		/* P: mutex */
+	struct completion		ep0req_completion;	/* P: mutex */
+
+	/* reference counter */
+	refcount_t			ref;
+	/* how many files are opened (EP0 and others) */
+	atomic_t			opened;
+
+	/* EP0 state */
+	enum ffs_state			state;
+
+	/*
+	 * Possible transitions:
+	 * + FFS_NO_SETUP        -> FFS_SETUP_PENDING  -- P: ev.waitq.lock
+	 *               happens only in ep0 read which is P: mutex
+	 * + FFS_SETUP_PENDING   -> FFS_NO_SETUP       -- P: ev.waitq.lock
+	 *               happens only in ep0 i/o  which is P: mutex
+	 * + FFS_SETUP_PENDING   -> FFS_SETUP_CANCELLED -- P: ev.waitq.lock
+	 * + FFS_SETUP_CANCELLED -> FFS_NO_SETUP        -- cmpxchg
+	 *
+	 * This field should never be accessed directly and instead
+	 * ffs_setup_state_clear_cancelled function should be used.
+	 */
+	enum ffs_setup_state		setup_state;
+
+	/* Events & such. */
+	struct {
+		u8				types[4];
+		unsigned short			count;
+		/* XXX REVISIT need to update it in some places, or do we? */
+		unsigned short			can_stall;
+		struct usb_ctrlrequest		setup;
+
+		wait_queue_head_t		waitq;
+	} ev; /* the whole structure, P: ev.waitq.lock */
+
+	/* Flags */
+	unsigned long			flags;
+#define FFS_FL_CALL_CLOSED_CALLBACK 0
+#define FFS_FL_BOUND                1
+
+	/* For waking up blocked threads when function is enabled. */
+	wait_queue_head_t		wait;
+
+	/* Active function */
+	struct ffs_function		*func;
+
+	/*
+	 * Device name, write once when file system is mounted.
+	 * Intended for user to read if she wants.
+	 */
+	const char			*dev_name;
+	/* Private data for our user (ie. gadget).  Managed by user. */
+	void				*private_data;
+
+	/* filled by __ffs_data_got_descs() */
+	/*
+	 * raw_descs is what you kfree, real_descs points inside of raw_descs,
+	 * where full speed, high speed and super speed descriptors start.
+	 * real_descs_length is the length of all those descriptors.
+	 */
+	const void			*raw_descs_data;
+	const void			*raw_descs;
+	unsigned			raw_descs_length;
+	unsigned			fs_descs_count;
+	unsigned			hs_descs_count;
+	unsigned			ss_descs_count;
+	unsigned			ms_os_descs_count;
+	unsigned			ms_os_descs_ext_prop_count;
+	unsigned			ms_os_descs_ext_prop_name_len;
+	unsigned			ms_os_descs_ext_prop_data_len;
+	void				*ms_os_descs_ext_prop_avail;
+	void				*ms_os_descs_ext_prop_name_avail;
+	void				*ms_os_descs_ext_prop_data_avail;
+
+	unsigned			user_flags;
+
+#define FFS_MAX_EPS_COUNT 31
+	u8				eps_addrmap[FFS_MAX_EPS_COUNT];
+
+	unsigned short			strings_count;
+	unsigned short			interfaces_count;
+	unsigned short			eps_count;
+	unsigned short			_pad1;
+
+	/* filled by __ffs_data_got_strings() */
+	/* ids in stringtabs are set in functionfs_bind() */
+	const void			*raw_strings;
+	struct usb_gadget_strings	**stringtabs;
+
+	/*
+	 * File system's super block, write once when file system is
+	 * mounted.
+	 */
+	struct super_block		*sb;
+
+	/* File permissions, written once when fs is mounted */
+	struct ffs_file_perms {
+		umode_t				mode;
+		kuid_t				uid;
+		kgid_t				gid;
+	}				file_perms;
+
+	struct eventfd_ctx *ffs_eventfd;
+	struct workqueue_struct *io_completion_wq;
+	bool no_disconnect;
+	struct work_struct reset_work;
+
+	/*
+	 * The endpoint files, filled by ffs_epfiles_create(),
+	 * destroyed by ffs_epfiles_destroy().
+	 */
+	struct ffs_epfile		*epfiles;
+};
+
+
+struct f_fs_opts {
+	struct usb_function_instance	func_inst;
+	struct ffs_dev			*dev;
+	unsigned			refcnt;
+	bool				no_configfs;
+};
+
+static inline struct f_fs_opts *to_f_fs_opts(struct usb_function_instance *fi)
+{
+	return container_of(fi, struct f_fs_opts, func_inst);
+}
+
+#endif /* U_FFS_H */
diff --git a/drivers/usb/gadget/function/u_gether.h b/drivers/usb/gadget/function/u_gether.h
new file mode 100644
index 000000000..2f7a373ed
--- /dev/null
+++ b/drivers/usb/gadget/function/u_gether.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * u_gether.h
+ *
+ * Utility definitions for the subset function
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#ifndef U_GETHER_H
+#define U_GETHER_H
+
+#include <linux/usb/composite.h>
+
+struct f_gether_opts {
+	struct usb_function_instance	func_inst;
+	struct net_device		*net;
+	bool				bound;
+
+	/*
+	 * Read/write access to configfs attributes is handled by configfs.
+	 *
+	 * This is to protect the data from concurrent access by read/write
+	 * and create symlink/remove symlink.
+	 */
+	struct mutex			lock;
+	int				refcnt;
+};
+
+#endif /* U_GETHER_H */
diff --git a/drivers/usb/gadget/function/u_hid.h b/drivers/usb/gadget/function/u_hid.h
new file mode 100644
index 000000000..84bb70292
--- /dev/null
+++ b/drivers/usb/gadget/function/u_hid.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * u_hid.h
+ *
+ * Utility definitions for the hid function
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#ifndef U_HID_H
+#define U_HID_H
+
+#include <linux/usb/composite.h>
+
+struct f_hid_opts {
+	struct usb_function_instance	func_inst;
+	int				minor;
+	unsigned char			subclass;
+	unsigned char			protocol;
+	unsigned char			no_out_endpoint;
+	unsigned short			report_length;
+	unsigned short			report_desc_length;
+	unsigned char			*report_desc;
+	bool				report_desc_alloc;
+
+	/*
+	 * Protect the data form concurrent access by read/write
+	 * and create symlink/remove symlink.
+	 */
+	struct mutex			lock;
+	int				refcnt;
+};
+
+int ghid_setup(struct usb_gadget *g, int count);
+void ghid_cleanup(void);
+
+#endif /* U_HID_H */
diff --git a/drivers/usb/gadget/function/u_midi.h b/drivers/usb/gadget/function/u_midi.h
new file mode 100644
index 000000000..2e400b495
--- /dev/null
+++ b/drivers/usb/gadget/function/u_midi.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * u_midi.h
+ *
+ * Utility definitions for the midi function
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#ifndef U_MIDI_H
+#define U_MIDI_H
+
+#include <linux/usb/composite.h>
+
+struct f_midi_opts {
+	struct usb_function_instance	func_inst;
+	int				index;
+	char				*id;
+	bool				id_allocated;
+	unsigned int			in_ports;
+	unsigned int			out_ports;
+	unsigned int			buflen;
+	unsigned int			qlen;
+
+	/*
+	 * Protect the data form concurrent access by read/write
+	 * and create symlink/remove symlink.
+	 */
+	struct mutex			lock;
+	int				refcnt;
+};
+
+#endif /* U_MIDI_H */
+
diff --git a/drivers/usb/gadget/function/u_ncm.h b/drivers/usb/gadget/function/u_ncm.h
new file mode 100644
index 000000000..5408854d8
--- /dev/null
+++ b/drivers/usb/gadget/function/u_ncm.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * u_ncm.h
+ *
+ * Utility definitions for the ncm function
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#ifndef U_NCM_H
+#define U_NCM_H
+
+#include <linux/usb/composite.h>
+
+struct f_ncm_opts {
+	struct usb_function_instance	func_inst;
+	struct net_device		*net;
+	bool				bound;
+
+	struct config_group		*ncm_interf_group;
+	struct usb_os_desc		ncm_os_desc;
+	char				ncm_ext_compat_id[16];
+	/*
+	 * Read/write access to configfs attributes is handled by configfs.
+	 *
+	 * This is to protect the data from concurrent access by read/write
+	 * and create symlink/remove symlink.
+	 */
+	struct mutex			lock;
+	int				refcnt;
+};
+
+#endif /* U_NCM_H */
diff --git a/drivers/usb/gadget/function/u_phonet.h b/drivers/usb/gadget/function/u_phonet.h
new file mode 100644
index 000000000..c53233b37
--- /dev/null
+++ b/drivers/usb/gadget/function/u_phonet.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * u_phonet.h - interface to Phonet
+ *
+ * Copyright (C) 2007-2008 by Nokia Corporation
+ */
+
+#ifndef __U_PHONET_H
+#define __U_PHONET_H
+
+#include <linux/usb/composite.h>
+#include <linux/usb/cdc.h>
+
+struct f_phonet_opts {
+	struct usb_function_instance func_inst;
+	bool bound;
+	struct net_device *net;
+};
+
+struct net_device *gphonet_setup_default(void);
+void gphonet_set_gadget(struct net_device *net, struct usb_gadget *g);
+int gphonet_register_netdev(struct net_device *net);
+int phonet_bind_config(struct usb_configuration *c, struct net_device *dev);
+void gphonet_cleanup(struct net_device *dev);
+
+#endif /* __U_PHONET_H */
diff --git a/drivers/usb/gadget/function/u_printer.h b/drivers/usb/gadget/function/u_printer.h
new file mode 100644
index 000000000..318205fb7
--- /dev/null
+++ b/drivers/usb/gadget/function/u_printer.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * u_printer.h
+ *
+ * Utility definitions for the printer function
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#ifndef U_PRINTER_H
+#define U_PRINTER_H
+
+#include <linux/usb/composite.h>
+
+struct f_printer_opts {
+	struct usb_function_instance	func_inst;
+	int				minor;
+	char				*pnp_string;
+	bool				pnp_string_allocated;
+	unsigned			q_len;
+
+	/*
+	 * Protect the data from concurrent access by read/write
+	 * and create symlink/remove symlink
+	 */
+	struct mutex			lock;
+	int				refcnt;
+};
+
+#endif /* U_PRINTER_H */
diff --git a/drivers/usb/gadget/function/u_rndis.h b/drivers/usb/gadget/function/u_rndis.h
new file mode 100644
index 000000000..a8c409b2f
--- /dev/null
+++ b/drivers/usb/gadget/function/u_rndis.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * u_rndis.h
+ *
+ * Utility definitions for the subset function
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#ifndef U_RNDIS_H
+#define U_RNDIS_H
+
+#include <linux/usb/composite.h>
+
+struct f_rndis_opts {
+	struct usb_function_instance	func_inst;
+	u32				vendor_id;
+	const char			*manufacturer;
+	struct net_device		*net;
+	bool				bound;
+	bool				borrowed_net;
+
+	struct config_group		*rndis_interf_group;
+	struct usb_os_desc		rndis_os_desc;
+	char				rndis_ext_compat_id[16];
+
+	u8				class;
+	u8				subclass;
+	u8				protocol;
+
+	/*
+	 * Read/write access to configfs attributes is handled by configfs.
+	 *
+	 * This is to protect the data from concurrent access by read/write
+	 * and create symlink/remove symlink.
+	 */
+	struct mutex			lock;
+	int				refcnt;
+};
+
+void rndis_borrow_net(struct usb_function_instance *f, struct net_device *net);
+
+#endif /* U_RNDIS_H */
diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
new file mode 100644
index 000000000..3c51355cc
--- /dev/null
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -0,0 +1,1534 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * u_serial.c - utilities for USB gadget "serial port"/TTY support
+ *
+ * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
+ * Copyright (C) 2008 David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ *
+ * This code also borrows from usbserial.c, which is
+ * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
+ * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com)
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/kthread.h>
+#include <linux/workqueue.h>
+#include <linux/kfifo.h>
+
+#include "u_serial.h"
+
+
+/*
+ * This component encapsulates the TTY layer glue needed to provide basic
+ * "serial port" functionality through the USB gadget stack.  Each such
+ * port is exposed through a /dev/ttyGS* node.
+ *
+ * After this module has been loaded, the individual TTY port can be requested
+ * (gserial_alloc_line()) and it will stay available until they are removed
+ * (gserial_free_line()). Each one may be connected to a USB function
+ * (gserial_connect), or disconnected (with gserial_disconnect) when the USB
+ * host issues a config change event. Data can only flow when the port is
+ * connected to the host.
+ *
+ * A given TTY port can be made available in multiple configurations.
+ * For example, each one might expose a ttyGS0 node which provides a
+ * login application.  In one case that might use CDC ACM interface 0,
+ * while another configuration might use interface 3 for that.  The
+ * work to handle that (including descriptor management) is not part
+ * of this component.
+ *
+ * Configurations may expose more than one TTY port.  For example, if
+ * ttyGS0 provides login service, then ttyGS1 might provide dialer access
+ * for a telephone or fax link.  And ttyGS2 might be something that just
+ * needs a simple byte stream interface for some messaging protocol that
+ * is managed in userspace ... OBEX, PTP, and MTP have been mentioned.
+ *
+ *
+ * gserial is the lifecycle interface, used by USB functions
+ * gs_port is the I/O nexus, used by the tty driver
+ * tty_struct links to the tty/filesystem framework
+ *
+ * gserial <---> gs_port ... links will be null when the USB link is
+ * inactive; managed by gserial_{connect,disconnect}().  each gserial
+ * instance can wrap its own USB control protocol.
+ *	gserial->ioport == usb_ep->driver_data ... gs_port
+ *	gs_port->port_usb ... gserial
+ *
+ * gs_port <---> tty_struct ... links will be null when the TTY file
+ * isn't opened; managed by gs_open()/gs_close()
+ *	gserial->port_tty ... tty_struct
+ *	tty_struct->driver_data ... gserial
+ */
+
+/* RX and TX queues can buffer QUEUE_SIZE packets before they hit the
+ * next layer of buffering.  For TX that's a circular buffer; for RX
+ * consider it a NOP.  A third layer is provided by the TTY code.
+ */
+#define QUEUE_SIZE		16
+#define WRITE_BUF_SIZE		8192		/* TX only */
+#define GS_CONSOLE_BUF_SIZE	8192
+
+/* Prevents race conditions while accessing gser->ioport */
+static DEFINE_SPINLOCK(serial_port_lock);
+
+/* console info */
+struct gs_console {
+	struct console		console;
+	struct work_struct	work;
+	spinlock_t		lock;
+	struct usb_request	*req;
+	struct kfifo		buf;
+	size_t			missed;
+};
+
+/*
+ * The port structure holds info for each port, one for each minor number
+ * (and thus for each /dev/ node).
+ */
+struct gs_port {
+	struct tty_port		port;
+	spinlock_t		port_lock;	/* guard port_* access */
+
+	struct gserial		*port_usb;
+#ifdef CONFIG_U_SERIAL_CONSOLE
+	struct gs_console	*console;
+#endif
+
+	u8			port_num;
+
+	struct list_head	read_pool;
+	int read_started;
+	int read_allocated;
+	struct list_head	read_queue;
+	unsigned		n_read;
+	struct delayed_work	push;
+
+	struct list_head	write_pool;
+	int write_started;
+	int write_allocated;
+	struct kfifo		port_write_buf;
+	wait_queue_head_t	drain_wait;	/* wait while writes drain */
+	bool                    write_busy;
+	wait_queue_head_t	close_wait;
+	bool			suspended;	/* port suspended */
+	bool			start_delayed;	/* delay start when suspended */
+
+	/* REVISIT this state ... */
+	struct usb_cdc_line_coding port_line_coding;	/* 8-N-1 etc */
+};
+
+static struct portmaster {
+	struct mutex	lock;			/* protect open/close */
+	struct gs_port	*port;
+} ports[MAX_U_SERIAL_PORTS];
+
+#define GS_CLOSE_TIMEOUT		15		/* seconds */
+
+
+
+#ifdef VERBOSE_DEBUG
+#ifndef pr_vdebug
+#define pr_vdebug(fmt, arg...) \
+	pr_debug(fmt, ##arg)
+#endif /* pr_vdebug */
+#else
+#ifndef pr_vdebug
+#define pr_vdebug(fmt, arg...) \
+	({ if (0) pr_debug(fmt, ##arg); })
+#endif /* pr_vdebug */
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* I/O glue between TTY (upper) and USB function (lower) driver layers */
+
+/*
+ * gs_alloc_req
+ *
+ * Allocate a usb_request and its buffer.  Returns a pointer to the
+ * usb_request or NULL if there is an error.
+ */
+struct usb_request *
+gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
+{
+	struct usb_request *req;
+
+	req = usb_ep_alloc_request(ep, kmalloc_flags);
+
+	if (req != NULL) {
+		req->length = len;
+		req->buf = kmalloc(len, kmalloc_flags);
+		if (req->buf == NULL) {
+			usb_ep_free_request(ep, req);
+			return NULL;
+		}
+	}
+
+	return req;
+}
+EXPORT_SYMBOL_GPL(gs_alloc_req);
+
+/*
+ * gs_free_req
+ *
+ * Free a usb_request and its buffer.
+ */
+void gs_free_req(struct usb_ep *ep, struct usb_request *req)
+{
+	kfree(req->buf);
+	usb_ep_free_request(ep, req);
+}
+EXPORT_SYMBOL_GPL(gs_free_req);
+
+/*
+ * gs_send_packet
+ *
+ * If there is data to send, a packet is built in the given
+ * buffer and the size is returned.  If there is no data to
+ * send, 0 is returned.
+ *
+ * Called with port_lock held.
+ */
+static unsigned
+gs_send_packet(struct gs_port *port, char *packet, unsigned size)
+{
+	unsigned len;
+
+	len = kfifo_len(&port->port_write_buf);
+	if (len < size)
+		size = len;
+	if (size != 0)
+		size = kfifo_out(&port->port_write_buf, packet, size);
+	return size;
+}
+
+/*
+ * gs_start_tx
+ *
+ * This function finds available write requests, calls
+ * gs_send_packet to fill these packets with data, and
+ * continues until either there are no more write requests
+ * available or no more data to send.  This function is
+ * run whenever data arrives or write requests are available.
+ *
+ * Context: caller owns port_lock; port_usb is non-null.
+ */
+static int gs_start_tx(struct gs_port *port)
+/*
+__releases(&port->port_lock)
+__acquires(&port->port_lock)
+*/
+{
+	struct list_head	*pool = &port->write_pool;
+	struct usb_ep		*in;
+	int			status = 0;
+	bool			do_tty_wake = false;
+
+	if (!port->port_usb)
+		return status;
+
+	in = port->port_usb->in;
+
+	while (!port->write_busy && !list_empty(pool)) {
+		struct usb_request	*req;
+		int			len;
+
+		if (port->write_started >= QUEUE_SIZE)
+			break;
+
+		req = list_entry(pool->next, struct usb_request, list);
+		len = gs_send_packet(port, req->buf, in->maxpacket);
+		if (len == 0) {
+			wake_up_interruptible(&port->drain_wait);
+			break;
+		}
+		do_tty_wake = true;
+
+		req->length = len;
+		list_del(&req->list);
+		req->zero = kfifo_is_empty(&port->port_write_buf);
+
+		pr_vdebug("ttyGS%d: tx len=%d, %3ph ...\n", port->port_num, len, req->buf);
+
+		/* Drop lock while we call out of driver; completions
+		 * could be issued while we do so.  Disconnection may
+		 * happen too; maybe immediately before we queue this!
+		 *
+		 * NOTE that we may keep sending data for a while after
+		 * the TTY closed (dev->ioport->port_tty is NULL).
+		 */
+		port->write_busy = true;
+		spin_unlock(&port->port_lock);
+		status = usb_ep_queue(in, req, GFP_ATOMIC);
+		spin_lock(&port->port_lock);
+		port->write_busy = false;
+
+		if (status) {
+			pr_debug("%s: %s %s err %d\n",
+					__func__, "queue", in->name, status);
+			list_add(&req->list, pool);
+			break;
+		}
+
+		port->write_started++;
+
+		/* abort immediately after disconnect */
+		if (!port->port_usb)
+			break;
+	}
+
+	if (do_tty_wake && port->port.tty)
+		tty_wakeup(port->port.tty);
+	return status;
+}
+
+/*
+ * Context: caller owns port_lock, and port_usb is set
+ */
+static unsigned gs_start_rx(struct gs_port *port)
+/*
+__releases(&port->port_lock)
+__acquires(&port->port_lock)
+*/
+{
+	struct list_head	*pool = &port->read_pool;
+	struct usb_ep		*out = port->port_usb->out;
+
+	while (!list_empty(pool)) {
+		struct usb_request	*req;
+		int			status;
+		struct tty_struct	*tty;
+
+		/* no more rx if closed */
+		tty = port->port.tty;
+		if (!tty)
+			break;
+
+		if (port->read_started >= QUEUE_SIZE)
+			break;
+
+		req = list_entry(pool->next, struct usb_request, list);
+		list_del(&req->list);
+		req->length = out->maxpacket;
+
+		/* drop lock while we call out; the controller driver
+		 * may need to call us back (e.g. for disconnect)
+		 */
+		spin_unlock(&port->port_lock);
+		status = usb_ep_queue(out, req, GFP_ATOMIC);
+		spin_lock(&port->port_lock);
+
+		if (status) {
+			pr_debug("%s: %s %s err %d\n",
+					__func__, "queue", out->name, status);
+			list_add(&req->list, pool);
+			break;
+		}
+		port->read_started++;
+
+		/* abort immediately after disconnect */
+		if (!port->port_usb)
+			break;
+	}
+	return port->read_started;
+}
+
+/*
+ * RX work takes data out of the RX queue and hands it up to the TTY
+ * layer until it refuses to take any more data (or is throttled back).
+ * Then it issues reads for any further data.
+ *
+ * If the RX queue becomes full enough that no usb_request is queued,
+ * the OUT endpoint may begin NAKing as soon as its FIFO fills up.
+ * So QUEUE_SIZE packets plus however many the FIFO holds (usually two)
+ * can be buffered before the TTY layer's buffers (currently 64 KB).
+ */
+static void gs_rx_push(struct work_struct *work)
+{
+	struct delayed_work	*w = to_delayed_work(work);
+	struct gs_port		*port = container_of(w, struct gs_port, push);
+	struct tty_struct	*tty;
+	struct list_head	*queue = &port->read_queue;
+	bool			disconnect = false;
+	bool			do_push = false;
+
+	/* hand any queued data to the tty */
+	spin_lock_irq(&port->port_lock);
+	tty = port->port.tty;
+	while (!list_empty(queue)) {
+		struct usb_request	*req;
+
+		req = list_first_entry(queue, struct usb_request, list);
+
+		/* leave data queued if tty was rx throttled */
+		if (tty && tty_throttled(tty))
+			break;
+
+		switch (req->status) {
+		case -ESHUTDOWN:
+			disconnect = true;
+			pr_vdebug("ttyGS%d: shutdown\n", port->port_num);
+			break;
+
+		default:
+			/* presumably a transient fault */
+			pr_warn("ttyGS%d: unexpected RX status %d\n",
+				port->port_num, req->status);
+			fallthrough;
+		case 0:
+			/* normal completion */
+			break;
+		}
+
+		/* push data to (open) tty */
+		if (req->actual && tty) {
+			char		*packet = req->buf;
+			unsigned	size = req->actual;
+			unsigned	n;
+			int		count;
+
+			/* we may have pushed part of this packet already... */
+			n = port->n_read;
+			if (n) {
+				packet += n;
+				size -= n;
+			}
+
+			count = tty_insert_flip_string(&port->port, packet,
+					size);
+			if (count)
+				do_push = true;
+			if (count != size) {
+				/* stop pushing; TTY layer can't handle more */
+				port->n_read += count;
+				pr_vdebug("ttyGS%d: rx block %d/%d\n",
+					  port->port_num, count, req->actual);
+				break;
+			}
+			port->n_read = 0;
+		}
+
+		list_move(&req->list, &port->read_pool);
+		port->read_started--;
+	}
+
+	/* Push from tty to ldisc; this is handled by a workqueue,
+	 * so we won't get callbacks and can hold port_lock
+	 */
+	if (do_push)
+		tty_flip_buffer_push(&port->port);
+
+
+	/* We want our data queue to become empty ASAP, keeping data
+	 * in the tty and ldisc (not here).  If we couldn't push any
+	 * this time around, RX may be starved, so wait until next jiffy.
+	 *
+	 * We may leave non-empty queue only when there is a tty, and
+	 * either it is throttled or there is no more room in flip buffer.
+	 */
+	if (!list_empty(queue) && !tty_throttled(tty))
+		schedule_delayed_work(&port->push, 1);
+
+	/* If we're still connected, refill the USB RX queue. */
+	if (!disconnect && port->port_usb)
+		gs_start_rx(port);
+
+	spin_unlock_irq(&port->port_lock);
+}
+
+static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct gs_port	*port = ep->driver_data;
+
+	/* Queue all received data until the tty layer is ready for it. */
+	spin_lock(&port->port_lock);
+	list_add_tail(&req->list, &port->read_queue);
+	schedule_delayed_work(&port->push, 0);
+	spin_unlock(&port->port_lock);
+}
+
+static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct gs_port	*port = ep->driver_data;
+
+	spin_lock(&port->port_lock);
+	list_add(&req->list, &port->write_pool);
+	port->write_started--;
+
+	switch (req->status) {
+	default:
+		/* presumably a transient fault */
+		pr_warn("%s: unexpected %s status %d\n",
+			__func__, ep->name, req->status);
+		fallthrough;
+	case 0:
+		/* normal completion */
+		gs_start_tx(port);
+		break;
+
+	case -ESHUTDOWN:
+		/* disconnect */
+		pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
+		break;
+	}
+
+	spin_unlock(&port->port_lock);
+}
+
+static void gs_free_requests(struct usb_ep *ep, struct list_head *head,
+							 int *allocated)
+{
+	struct usb_request	*req;
+
+	while (!list_empty(head)) {
+		req = list_entry(head->next, struct usb_request, list);
+		list_del(&req->list);
+		gs_free_req(ep, req);
+		if (allocated)
+			(*allocated)--;
+	}
+}
+
+static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head,
+		void (*fn)(struct usb_ep *, struct usb_request *),
+		int *allocated)
+{
+	int			i;
+	struct usb_request	*req;
+	int n = allocated ? QUEUE_SIZE - *allocated : QUEUE_SIZE;
+
+	/* Pre-allocate up to QUEUE_SIZE transfers, but if we can't
+	 * do quite that many this time, don't fail ... we just won't
+	 * be as speedy as we might otherwise be.
+	 */
+	for (i = 0; i < n; i++) {
+		req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
+		if (!req)
+			return list_empty(head) ? -ENOMEM : 0;
+		req->complete = fn;
+		list_add_tail(&req->list, head);
+		if (allocated)
+			(*allocated)++;
+	}
+	return 0;
+}
+
+/**
+ * gs_start_io - start USB I/O streams
+ * @port: port to use
+ * Context: holding port_lock; port_tty and port_usb are non-null
+ *
+ * We only start I/O when something is connected to both sides of
+ * this port.  If nothing is listening on the host side, we may
+ * be pointlessly filling up our TX buffers and FIFO.
+ */
+static int gs_start_io(struct gs_port *port)
+{
+	struct list_head	*head = &port->read_pool;
+	struct usb_ep		*ep = port->port_usb->out;
+	int			status;
+	unsigned		started;
+
+	/* Allocate RX and TX I/O buffers.  We can't easily do this much
+	 * earlier (with GFP_KERNEL) because the requests are coupled to
+	 * endpoints, as are the packet sizes we'll be using.  Different
+	 * configurations may use different endpoints with a given port;
+	 * and high speed vs full speed changes packet sizes too.
+	 */
+	status = gs_alloc_requests(ep, head, gs_read_complete,
+		&port->read_allocated);
+	if (status)
+		return status;
+
+	status = gs_alloc_requests(port->port_usb->in, &port->write_pool,
+			gs_write_complete, &port->write_allocated);
+	if (status) {
+		gs_free_requests(ep, head, &port->read_allocated);
+		return status;
+	}
+
+	/* queue read requests */
+	port->n_read = 0;
+	started = gs_start_rx(port);
+
+	if (started) {
+		gs_start_tx(port);
+		/* Unblock any pending writes into our circular buffer, in case
+		 * we didn't in gs_start_tx() */
+		tty_wakeup(port->port.tty);
+	} else {
+		gs_free_requests(ep, head, &port->read_allocated);
+		gs_free_requests(port->port_usb->in, &port->write_pool,
+			&port->write_allocated);
+		status = -EIO;
+	}
+
+	return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* TTY Driver */
+
+/*
+ * gs_open sets up the link between a gs_port and its associated TTY.
+ * That link is broken *only* by TTY close(), and all driver methods
+ * know that.
+ */
+static int gs_open(struct tty_struct *tty, struct file *file)
+{
+	int		port_num = tty->index;
+	struct gs_port	*port;
+	int		status = 0;
+
+	mutex_lock(&ports[port_num].lock);
+	port = ports[port_num].port;
+	if (!port) {
+		status = -ENODEV;
+		goto out;
+	}
+
+	spin_lock_irq(&port->port_lock);
+
+	/* allocate circular buffer on first open */
+	if (!kfifo_initialized(&port->port_write_buf)) {
+
+		spin_unlock_irq(&port->port_lock);
+
+		/*
+		 * portmaster's mutex still protects from simultaneous open(),
+		 * and close() can't happen, yet.
+		 */
+
+		status = kfifo_alloc(&port->port_write_buf,
+				     WRITE_BUF_SIZE, GFP_KERNEL);
+		if (status) {
+			pr_debug("gs_open: ttyGS%d (%p,%p) no buffer\n",
+				 port_num, tty, file);
+			goto out;
+		}
+
+		spin_lock_irq(&port->port_lock);
+	}
+
+	/* already open?  Great. */
+	if (port->port.count++)
+		goto exit_unlock_port;
+
+	tty->driver_data = port;
+	port->port.tty = tty;
+
+	/* if connected, start the I/O stream */
+	if (port->port_usb) {
+		/* if port is suspended, wait resume to start I/0 stream */
+		if (!port->suspended) {
+			struct gserial	*gser = port->port_usb;
+
+			pr_debug("gs_open: start ttyGS%d\n", port->port_num);
+			gs_start_io(port);
+
+			if (gser->connect)
+				gser->connect(gser);
+		} else {
+			pr_debug("delay start of ttyGS%d\n", port->port_num);
+			port->start_delayed = true;
+		}
+	}
+
+	pr_debug("gs_open: ttyGS%d (%p,%p)\n", port->port_num, tty, file);
+
+exit_unlock_port:
+	spin_unlock_irq(&port->port_lock);
+out:
+	mutex_unlock(&ports[port_num].lock);
+	return status;
+}
+
+static int gs_close_flush_done(struct gs_port *p)
+{
+	int cond;
+
+	/* return true on disconnect or empty buffer or if raced with open() */
+	spin_lock_irq(&p->port_lock);
+	cond = p->port_usb == NULL || !kfifo_len(&p->port_write_buf) ||
+		p->port.count > 1;
+	spin_unlock_irq(&p->port_lock);
+
+	return cond;
+}
+
+static void gs_close(struct tty_struct *tty, struct file *file)
+{
+	struct gs_port *port = tty->driver_data;
+	struct gserial	*gser;
+
+	spin_lock_irq(&port->port_lock);
+
+	if (port->port.count != 1) {
+raced_with_open:
+		if (port->port.count == 0)
+			WARN_ON(1);
+		else
+			--port->port.count;
+		goto exit;
+	}
+
+	pr_debug("gs_close: ttyGS%d (%p,%p) ...\n", port->port_num, tty, file);
+
+	gser = port->port_usb;
+	if (gser && !port->suspended && gser->disconnect)
+		gser->disconnect(gser);
+
+	/* wait for circular write buffer to drain, disconnect, or at
+	 * most GS_CLOSE_TIMEOUT seconds; then discard the rest
+	 */
+	if (kfifo_len(&port->port_write_buf) > 0 && gser) {
+		spin_unlock_irq(&port->port_lock);
+		wait_event_interruptible_timeout(port->drain_wait,
+					gs_close_flush_done(port),
+					GS_CLOSE_TIMEOUT * HZ);
+		spin_lock_irq(&port->port_lock);
+
+		if (port->port.count != 1)
+			goto raced_with_open;
+
+		gser = port->port_usb;
+	}
+
+	/* Iff we're disconnected, there can be no I/O in flight so it's
+	 * ok to free the circular buffer; else just scrub it.  And don't
+	 * let the push async work fire again until we're re-opened.
+	 */
+	if (gser == NULL)
+		kfifo_free(&port->port_write_buf);
+	else
+		kfifo_reset(&port->port_write_buf);
+
+	port->start_delayed = false;
+	port->port.count = 0;
+	port->port.tty = NULL;
+
+	pr_debug("gs_close: ttyGS%d (%p,%p) done!\n",
+			port->port_num, tty, file);
+
+	wake_up(&port->close_wait);
+exit:
+	spin_unlock_irq(&port->port_lock);
+}
+
+static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+	struct gs_port	*port = tty->driver_data;
+	unsigned long	flags;
+
+	pr_vdebug("gs_write: ttyGS%d (%p) writing %d bytes\n",
+			port->port_num, tty, count);
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	if (count)
+		count = kfifo_in(&port->port_write_buf, buf, count);
+	/* treat count == 0 as flush_chars() */
+	if (port->port_usb)
+		gs_start_tx(port);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+
+	return count;
+}
+
+static int gs_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	struct gs_port	*port = tty->driver_data;
+	unsigned long	flags;
+	int		status;
+
+	pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %ps\n",
+		port->port_num, tty, ch, __builtin_return_address(0));
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	status = kfifo_put(&port->port_write_buf, ch);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+
+	return status;
+}
+
+static void gs_flush_chars(struct tty_struct *tty)
+{
+	struct gs_port	*port = tty->driver_data;
+	unsigned long	flags;
+
+	pr_vdebug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	if (port->port_usb)
+		gs_start_tx(port);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+}
+
+static unsigned int gs_write_room(struct tty_struct *tty)
+{
+	struct gs_port	*port = tty->driver_data;
+	unsigned long	flags;
+	unsigned int room = 0;
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	if (port->port_usb)
+		room = kfifo_avail(&port->port_write_buf);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+
+	pr_vdebug("gs_write_room: (%d,%p) room=%u\n",
+		port->port_num, tty, room);
+
+	return room;
+}
+
+static unsigned int gs_chars_in_buffer(struct tty_struct *tty)
+{
+	struct gs_port	*port = tty->driver_data;
+	unsigned long	flags;
+	unsigned int	chars;
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	chars = kfifo_len(&port->port_write_buf);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+
+	pr_vdebug("gs_chars_in_buffer: (%d,%p) chars=%u\n",
+		port->port_num, tty, chars);
+
+	return chars;
+}
+
+/* undo side effects of setting TTY_THROTTLED */
+static void gs_unthrottle(struct tty_struct *tty)
+{
+	struct gs_port		*port = tty->driver_data;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	if (port->port_usb) {
+		/* Kickstart read queue processing.  We don't do xon/xoff,
+		 * rts/cts, or other handshaking with the host, but if the
+		 * read queue backs up enough we'll be NAKing OUT packets.
+		 */
+		pr_vdebug("ttyGS%d: unthrottle\n", port->port_num);
+		schedule_delayed_work(&port->push, 0);
+	}
+	spin_unlock_irqrestore(&port->port_lock, flags);
+}
+
+static int gs_break_ctl(struct tty_struct *tty, int duration)
+{
+	struct gs_port	*port = tty->driver_data;
+	int		status = 0;
+	struct gserial	*gser;
+
+	pr_vdebug("gs_break_ctl: ttyGS%d, send break (%d) \n",
+			port->port_num, duration);
+
+	spin_lock_irq(&port->port_lock);
+	gser = port->port_usb;
+	if (gser && gser->send_break)
+		status = gser->send_break(gser, duration);
+	spin_unlock_irq(&port->port_lock);
+
+	return status;
+}
+
+static const struct tty_operations gs_tty_ops = {
+	.open =			gs_open,
+	.close =		gs_close,
+	.write =		gs_write,
+	.put_char =		gs_put_char,
+	.flush_chars =		gs_flush_chars,
+	.write_room =		gs_write_room,
+	.chars_in_buffer =	gs_chars_in_buffer,
+	.unthrottle =		gs_unthrottle,
+	.break_ctl =		gs_break_ctl,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static struct tty_driver *gs_tty_driver;
+
+#ifdef CONFIG_U_SERIAL_CONSOLE
+
+static void gs_console_complete_out(struct usb_ep *ep, struct usb_request *req)
+{
+	struct gs_console *cons = req->context;
+
+	switch (req->status) {
+	default:
+		pr_warn("%s: unexpected %s status %d\n",
+			__func__, ep->name, req->status);
+		fallthrough;
+	case 0:
+		/* normal completion */
+		spin_lock(&cons->lock);
+		req->length = 0;
+		schedule_work(&cons->work);
+		spin_unlock(&cons->lock);
+		break;
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		/* disconnect */
+		pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
+		break;
+	}
+}
+
+static void __gs_console_push(struct gs_console *cons)
+{
+	struct usb_request *req = cons->req;
+	struct usb_ep *ep;
+	size_t size;
+
+	if (!req)
+		return;	/* disconnected */
+
+	if (req->length)
+		return;	/* busy */
+
+	ep = cons->console.data;
+	size = kfifo_out(&cons->buf, req->buf, ep->maxpacket);
+	if (!size)
+		return;
+
+	if (cons->missed && ep->maxpacket >= 64) {
+		char buf[64];
+		size_t len;
+
+		len = sprintf(buf, "\n[missed %zu bytes]\n", cons->missed);
+		kfifo_in(&cons->buf, buf, len);
+		cons->missed = 0;
+	}
+
+	req->length = size;
+
+	spin_unlock_irq(&cons->lock);
+	if (usb_ep_queue(ep, req, GFP_ATOMIC))
+		req->length = 0;
+	spin_lock_irq(&cons->lock);
+}
+
+static void gs_console_work(struct work_struct *work)
+{
+	struct gs_console *cons = container_of(work, struct gs_console, work);
+
+	spin_lock_irq(&cons->lock);
+
+	__gs_console_push(cons);
+
+	spin_unlock_irq(&cons->lock);
+}
+
+static void gs_console_write(struct console *co,
+			     const char *buf, unsigned count)
+{
+	struct gs_console *cons = container_of(co, struct gs_console, console);
+	unsigned long flags;
+	size_t n;
+
+	spin_lock_irqsave(&cons->lock, flags);
+
+	n = kfifo_in(&cons->buf, buf, count);
+	if (n < count)
+		cons->missed += count - n;
+
+	if (cons->req && !cons->req->length)
+		schedule_work(&cons->work);
+
+	spin_unlock_irqrestore(&cons->lock, flags);
+}
+
+static struct tty_driver *gs_console_device(struct console *co, int *index)
+{
+	*index = co->index;
+	return gs_tty_driver;
+}
+
+static int gs_console_connect(struct gs_port *port)
+{
+	struct gs_console *cons = port->console;
+	struct usb_request *req;
+	struct usb_ep *ep;
+
+	if (!cons)
+		return 0;
+
+	ep = port->port_usb->in;
+	req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
+	if (!req)
+		return -ENOMEM;
+	req->complete = gs_console_complete_out;
+	req->context = cons;
+	req->length = 0;
+
+	spin_lock(&cons->lock);
+	cons->req = req;
+	cons->console.data = ep;
+	spin_unlock(&cons->lock);
+
+	pr_debug("ttyGS%d: console connected!\n", port->port_num);
+
+	schedule_work(&cons->work);
+
+	return 0;
+}
+
+static void gs_console_disconnect(struct gs_port *port)
+{
+	struct gs_console *cons = port->console;
+	struct usb_request *req;
+	struct usb_ep *ep;
+
+	if (!cons)
+		return;
+
+	spin_lock(&cons->lock);
+
+	req = cons->req;
+	ep = cons->console.data;
+	cons->req = NULL;
+
+	spin_unlock(&cons->lock);
+
+	if (!req)
+		return;
+
+	usb_ep_dequeue(ep, req);
+	gs_free_req(ep, req);
+}
+
+static int gs_console_init(struct gs_port *port)
+{
+	struct gs_console *cons;
+	int err;
+
+	if (port->console)
+		return 0;
+
+	cons = kzalloc(sizeof(*port->console), GFP_KERNEL);
+	if (!cons)
+		return -ENOMEM;
+
+	strcpy(cons->console.name, "ttyGS");
+	cons->console.write = gs_console_write;
+	cons->console.device = gs_console_device;
+	cons->console.flags = CON_PRINTBUFFER;
+	cons->console.index = port->port_num;
+
+	INIT_WORK(&cons->work, gs_console_work);
+	spin_lock_init(&cons->lock);
+
+	err = kfifo_alloc(&cons->buf, GS_CONSOLE_BUF_SIZE, GFP_KERNEL);
+	if (err) {
+		pr_err("ttyGS%d: allocate console buffer failed\n", port->port_num);
+		kfree(cons);
+		return err;
+	}
+
+	port->console = cons;
+	register_console(&cons->console);
+
+	spin_lock_irq(&port->port_lock);
+	if (port->port_usb)
+		gs_console_connect(port);
+	spin_unlock_irq(&port->port_lock);
+
+	return 0;
+}
+
+static void gs_console_exit(struct gs_port *port)
+{
+	struct gs_console *cons = port->console;
+
+	if (!cons)
+		return;
+
+	unregister_console(&cons->console);
+
+	spin_lock_irq(&port->port_lock);
+	if (cons->req)
+		gs_console_disconnect(port);
+	spin_unlock_irq(&port->port_lock);
+
+	cancel_work_sync(&cons->work);
+	kfifo_free(&cons->buf);
+	kfree(cons);
+	port->console = NULL;
+}
+
+ssize_t gserial_set_console(unsigned char port_num, const char *page, size_t count)
+{
+	struct gs_port *port;
+	bool enable;
+	int ret;
+
+	ret = strtobool(page, &enable);
+	if (ret)
+		return ret;
+
+	mutex_lock(&ports[port_num].lock);
+	port = ports[port_num].port;
+
+	if (WARN_ON(port == NULL)) {
+		ret = -ENXIO;
+		goto out;
+	}
+
+	if (enable)
+		ret = gs_console_init(port);
+	else
+		gs_console_exit(port);
+out:
+	mutex_unlock(&ports[port_num].lock);
+
+	return ret < 0 ? ret : count;
+}
+EXPORT_SYMBOL_GPL(gserial_set_console);
+
+ssize_t gserial_get_console(unsigned char port_num, char *page)
+{
+	struct gs_port *port;
+	ssize_t ret;
+
+	mutex_lock(&ports[port_num].lock);
+	port = ports[port_num].port;
+
+	if (WARN_ON(port == NULL))
+		ret = -ENXIO;
+	else
+		ret = sprintf(page, "%u\n", !!port->console);
+
+	mutex_unlock(&ports[port_num].lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gserial_get_console);
+
+#else
+
+static int gs_console_connect(struct gs_port *port)
+{
+	return 0;
+}
+
+static void gs_console_disconnect(struct gs_port *port)
+{
+}
+
+static int gs_console_init(struct gs_port *port)
+{
+	return -ENOSYS;
+}
+
+static void gs_console_exit(struct gs_port *port)
+{
+}
+
+#endif
+
+static int
+gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
+{
+	struct gs_port	*port;
+	int		ret = 0;
+
+	mutex_lock(&ports[port_num].lock);
+	if (ports[port_num].port) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	port = kzalloc(sizeof(struct gs_port), GFP_KERNEL);
+	if (port == NULL) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	tty_port_init(&port->port);
+	spin_lock_init(&port->port_lock);
+	init_waitqueue_head(&port->drain_wait);
+	init_waitqueue_head(&port->close_wait);
+
+	INIT_DELAYED_WORK(&port->push, gs_rx_push);
+
+	INIT_LIST_HEAD(&port->read_pool);
+	INIT_LIST_HEAD(&port->read_queue);
+	INIT_LIST_HEAD(&port->write_pool);
+
+	port->port_num = port_num;
+	port->port_line_coding = *coding;
+
+	ports[port_num].port = port;
+out:
+	mutex_unlock(&ports[port_num].lock);
+	return ret;
+}
+
+static int gs_closed(struct gs_port *port)
+{
+	int cond;
+
+	spin_lock_irq(&port->port_lock);
+	cond = port->port.count == 0;
+	spin_unlock_irq(&port->port_lock);
+
+	return cond;
+}
+
+static void gserial_free_port(struct gs_port *port)
+{
+	cancel_delayed_work_sync(&port->push);
+	/* wait for old opens to finish */
+	wait_event(port->close_wait, gs_closed(port));
+	WARN_ON(port->port_usb != NULL);
+	tty_port_destroy(&port->port);
+	kfree(port);
+}
+
+void gserial_free_line(unsigned char port_num)
+{
+	struct gs_port	*port;
+
+	mutex_lock(&ports[port_num].lock);
+	if (!ports[port_num].port) {
+		mutex_unlock(&ports[port_num].lock);
+		return;
+	}
+	port = ports[port_num].port;
+	gs_console_exit(port);
+	ports[port_num].port = NULL;
+	mutex_unlock(&ports[port_num].lock);
+
+	gserial_free_port(port);
+	tty_unregister_device(gs_tty_driver, port_num);
+}
+EXPORT_SYMBOL_GPL(gserial_free_line);
+
+int gserial_alloc_line_no_console(unsigned char *line_num)
+{
+	struct usb_cdc_line_coding	coding;
+	struct gs_port			*port;
+	struct device			*tty_dev;
+	int				ret;
+	int				port_num;
+
+	coding.dwDTERate = cpu_to_le32(9600);
+	coding.bCharFormat = 8;
+	coding.bParityType = USB_CDC_NO_PARITY;
+	coding.bDataBits = USB_CDC_1_STOP_BITS;
+
+	for (port_num = 0; port_num < MAX_U_SERIAL_PORTS; port_num++) {
+		ret = gs_port_alloc(port_num, &coding);
+		if (ret == -EBUSY)
+			continue;
+		if (ret)
+			return ret;
+		break;
+	}
+	if (ret)
+		return ret;
+
+	/* ... and sysfs class devices, so mdev/udev make /dev/ttyGS* */
+
+	port = ports[port_num].port;
+	tty_dev = tty_port_register_device(&port->port,
+			gs_tty_driver, port_num, NULL);
+	if (IS_ERR(tty_dev)) {
+		pr_err("%s: failed to register tty for port %d, err %ld\n",
+				__func__, port_num, PTR_ERR(tty_dev));
+
+		ret = PTR_ERR(tty_dev);
+		mutex_lock(&ports[port_num].lock);
+		ports[port_num].port = NULL;
+		mutex_unlock(&ports[port_num].lock);
+		gserial_free_port(port);
+		goto err;
+	}
+	*line_num = port_num;
+err:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gserial_alloc_line_no_console);
+
+int gserial_alloc_line(unsigned char *line_num)
+{
+	int ret = gserial_alloc_line_no_console(line_num);
+
+	if (!ret && !*line_num)
+		gs_console_init(ports[*line_num].port);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gserial_alloc_line);
+
+/**
+ * gserial_connect - notify TTY I/O glue that USB link is active
+ * @gser: the function, set up with endpoints and descriptors
+ * @port_num: which port is active
+ * Context: any (usually from irq)
+ *
+ * This is called activate endpoints and let the TTY layer know that
+ * the connection is active ... not unlike "carrier detect".  It won't
+ * necessarily start I/O queues; unless the TTY is held open by any
+ * task, there would be no point.  However, the endpoints will be
+ * activated so the USB host can perform I/O, subject to basic USB
+ * hardware flow control.
+ *
+ * Caller needs to have set up the endpoints and USB function in @dev
+ * before calling this, as well as the appropriate (speed-specific)
+ * endpoint descriptors, and also have allocate @port_num by calling
+ * @gserial_alloc_line().
+ *
+ * Returns negative errno or zero.
+ * On success, ep->driver_data will be overwritten.
+ */
+int gserial_connect(struct gserial *gser, u8 port_num)
+{
+	struct gs_port	*port;
+	unsigned long	flags;
+	int		status;
+
+	if (port_num >= MAX_U_SERIAL_PORTS)
+		return -ENXIO;
+
+	port = ports[port_num].port;
+	if (!port) {
+		pr_err("serial line %d not allocated.\n", port_num);
+		return -EINVAL;
+	}
+	if (port->port_usb) {
+		pr_err("serial line %d is in use.\n", port_num);
+		return -EBUSY;
+	}
+
+	/* activate the endpoints */
+	status = usb_ep_enable(gser->in);
+	if (status < 0)
+		return status;
+	gser->in->driver_data = port;
+
+	status = usb_ep_enable(gser->out);
+	if (status < 0)
+		goto fail_out;
+	gser->out->driver_data = port;
+
+	/* then tell the tty glue that I/O can work */
+	spin_lock_irqsave(&port->port_lock, flags);
+	gser->ioport = port;
+	port->port_usb = gser;
+
+	/* REVISIT unclear how best to handle this state...
+	 * we don't really couple it with the Linux TTY.
+	 */
+	gser->port_line_coding = port->port_line_coding;
+
+	/* REVISIT if waiting on "carrier detect", signal. */
+
+	/* if it's already open, start I/O ... and notify the serial
+	 * protocol about open/close status (connect/disconnect).
+	 */
+	if (port->port.count) {
+		pr_debug("gserial_connect: start ttyGS%d\n", port->port_num);
+		gs_start_io(port);
+		if (gser->connect)
+			gser->connect(gser);
+	} else {
+		if (gser->disconnect)
+			gser->disconnect(gser);
+	}
+
+	status = gs_console_connect(port);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+
+	return status;
+
+fail_out:
+	usb_ep_disable(gser->in);
+	return status;
+}
+EXPORT_SYMBOL_GPL(gserial_connect);
+/**
+ * gserial_disconnect - notify TTY I/O glue that USB link is inactive
+ * @gser: the function, on which gserial_connect() was called
+ * Context: any (usually from irq)
+ *
+ * This is called to deactivate endpoints and let the TTY layer know
+ * that the connection went inactive ... not unlike "hangup".
+ *
+ * On return, the state is as if gserial_connect() had never been called;
+ * there is no active USB I/O on these endpoints.
+ */
+void gserial_disconnect(struct gserial *gser)
+{
+	struct gs_port	*port = gser->ioport;
+	unsigned long	flags;
+
+	if (!port)
+		return;
+
+	spin_lock_irqsave(&serial_port_lock, flags);
+
+	/* tell the TTY glue not to do I/O here any more */
+	spin_lock(&port->port_lock);
+
+	gs_console_disconnect(port);
+
+	/* REVISIT as above: how best to track this? */
+	port->port_line_coding = gser->port_line_coding;
+
+	port->port_usb = NULL;
+	gser->ioport = NULL;
+	if (port->port.count > 0) {
+		wake_up_interruptible(&port->drain_wait);
+		if (port->port.tty)
+			tty_hangup(port->port.tty);
+	}
+	port->suspended = false;
+	spin_unlock(&port->port_lock);
+	spin_unlock_irqrestore(&serial_port_lock, flags);
+
+	/* disable endpoints, aborting down any active I/O */
+	usb_ep_disable(gser->out);
+	usb_ep_disable(gser->in);
+
+	/* finally, free any unused/unusable I/O buffers */
+	spin_lock_irqsave(&port->port_lock, flags);
+	if (port->port.count == 0)
+		kfifo_free(&port->port_write_buf);
+	gs_free_requests(gser->out, &port->read_pool, NULL);
+	gs_free_requests(gser->out, &port->read_queue, NULL);
+	gs_free_requests(gser->in, &port->write_pool, NULL);
+
+	port->read_allocated = port->read_started =
+		port->write_allocated = port->write_started = 0;
+
+	spin_unlock_irqrestore(&port->port_lock, flags);
+}
+EXPORT_SYMBOL_GPL(gserial_disconnect);
+
+void gserial_suspend(struct gserial *gser)
+{
+	struct gs_port	*port;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&serial_port_lock, flags);
+	port = gser->ioport;
+
+	if (!port) {
+		spin_unlock_irqrestore(&serial_port_lock, flags);
+		return;
+	}
+
+	spin_lock(&port->port_lock);
+	spin_unlock(&serial_port_lock);
+	port->suspended = true;
+	spin_unlock_irqrestore(&port->port_lock, flags);
+}
+EXPORT_SYMBOL_GPL(gserial_suspend);
+
+void gserial_resume(struct gserial *gser)
+{
+	struct gs_port *port;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&serial_port_lock, flags);
+	port = gser->ioport;
+
+	if (!port) {
+		spin_unlock_irqrestore(&serial_port_lock, flags);
+		return;
+	}
+
+	spin_lock(&port->port_lock);
+	spin_unlock(&serial_port_lock);
+	port->suspended = false;
+	if (!port->start_delayed) {
+		spin_unlock_irqrestore(&port->port_lock, flags);
+		return;
+	}
+
+	pr_debug("delayed start ttyGS%d\n", port->port_num);
+	gs_start_io(port);
+	if (gser->connect)
+		gser->connect(gser);
+	port->start_delayed = false;
+	spin_unlock_irqrestore(&port->port_lock, flags);
+}
+EXPORT_SYMBOL_GPL(gserial_resume);
+
+static int __init userial_init(void)
+{
+	struct tty_driver *driver;
+	unsigned			i;
+	int				status;
+
+	driver = tty_alloc_driver(MAX_U_SERIAL_PORTS, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(driver))
+		return PTR_ERR(driver);
+
+	driver->driver_name = "g_serial";
+	driver->name = "ttyGS";
+	/* uses dynamically assigned dev_t values */
+
+	driver->type = TTY_DRIVER_TYPE_SERIAL;
+	driver->subtype = SERIAL_TYPE_NORMAL;
+	driver->init_termios = tty_std_termios;
+
+	/* 9600-8-N-1 ... matches defaults expected by "usbser.sys" on
+	 * MS-Windows.  Otherwise, most of these flags shouldn't affect
+	 * anything unless we were to actually hook up to a serial line.
+	 */
+	driver->init_termios.c_cflag =
+			B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	driver->init_termios.c_ispeed = 9600;
+	driver->init_termios.c_ospeed = 9600;
+
+	tty_set_operations(driver, &gs_tty_ops);
+	for (i = 0; i < MAX_U_SERIAL_PORTS; i++)
+		mutex_init(&ports[i].lock);
+
+	/* export the driver ... */
+	status = tty_register_driver(driver);
+	if (status) {
+		pr_err("%s: cannot register, err %d\n",
+				__func__, status);
+		goto fail;
+	}
+
+	gs_tty_driver = driver;
+
+	pr_debug("%s: registered %d ttyGS* device%s\n", __func__,
+			MAX_U_SERIAL_PORTS,
+			(MAX_U_SERIAL_PORTS == 1) ? "" : "s");
+
+	return status;
+fail:
+	tty_driver_kref_put(driver);
+	return status;
+}
+module_init(userial_init);
+
+static void __exit userial_cleanup(void)
+{
+	tty_unregister_driver(gs_tty_driver);
+	tty_driver_kref_put(gs_tty_driver);
+	gs_tty_driver = NULL;
+}
+module_exit(userial_cleanup);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/function/u_serial.h b/drivers/usb/gadget/function/u_serial.h
new file mode 100644
index 000000000..102a7323a
--- /dev/null
+++ b/drivers/usb/gadget/function/u_serial.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * u_serial.h - interface to USB gadget "serial port"/TTY utilities
+ *
+ * Copyright (C) 2008 David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ */
+
+#ifndef __U_SERIAL_H
+#define __U_SERIAL_H
+
+#include <linux/usb/composite.h>
+#include <linux/usb/cdc.h>
+
+#define MAX_U_SERIAL_PORTS	8
+
+struct f_serial_opts {
+	struct usb_function_instance func_inst;
+	u8 port_num;
+};
+
+/*
+ * One non-multiplexed "serial" I/O port ... there can be several of these
+ * on any given USB peripheral device, if it provides enough endpoints.
+ *
+ * The "u_serial" utility component exists to do one thing:  manage TTY
+ * style I/O using the USB peripheral endpoints listed here, including
+ * hookups to sysfs and /dev for each logical "tty" device.
+ *
+ * REVISIT at least ACM could support tiocmget() if needed.
+ *
+ * REVISIT someday, allow multiplexing several TTYs over these endpoints.
+ */
+struct gserial {
+	struct usb_function		func;
+
+	/* port is managed by gserial_{connect,disconnect} */
+	struct gs_port			*ioport;
+
+	struct usb_ep			*in;
+	struct usb_ep			*out;
+
+	/* REVISIT avoid this CDC-ACM support harder ... */
+	struct usb_cdc_line_coding port_line_coding;	/* 9600-8-N-1 etc */
+
+	/* notification callbacks */
+	void (*connect)(struct gserial *p);
+	void (*disconnect)(struct gserial *p);
+	int (*send_break)(struct gserial *p, int duration);
+};
+
+/* utilities to allocate/free request and buffer */
+struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t flags);
+void gs_free_req(struct usb_ep *, struct usb_request *req);
+
+/* management of individual TTY ports */
+int gserial_alloc_line_no_console(unsigned char *port_line);
+int gserial_alloc_line(unsigned char *port_line);
+void gserial_free_line(unsigned char port_line);
+
+#ifdef CONFIG_U_SERIAL_CONSOLE
+
+ssize_t gserial_set_console(unsigned char port_num, const char *page, size_t count);
+ssize_t gserial_get_console(unsigned char port_num, char *page);
+
+#endif /* CONFIG_U_SERIAL_CONSOLE */
+
+/* connect/disconnect is handled by individual functions */
+int gserial_connect(struct gserial *, u8 port_num);
+void gserial_disconnect(struct gserial *);
+void gserial_suspend(struct gserial *p);
+void gserial_resume(struct gserial *p);
+
+/* functions are bound to configurations by a config or gadget driver */
+int gser_bind_config(struct usb_configuration *c, u8 port_num);
+int obex_bind_config(struct usb_configuration *c, u8 port_num);
+
+#endif /* __U_SERIAL_H */
diff --git a/drivers/usb/gadget/function/u_tcm.h b/drivers/usb/gadget/function/u_tcm.h
new file mode 100644
index 000000000..2cd15d9a1
--- /dev/null
+++ b/drivers/usb/gadget/function/u_tcm.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * u_tcm.h
+ *
+ * Utility definitions for the tcm function
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
+ */
+
+#ifndef U_TCM_H
+#define U_TCM_H
+
+#include <linux/usb/composite.h>
+
+/**
+ * @dependent: optional dependent module. Meant for legacy gadget.
+ * If non-null its refcount will be increased when a tpg is created and
+ * decreased when tpg is dropped.
+ * @dep_lock: lock for dependent module operations.
+ * @ready: true if the dependent module information is set.
+ * @can_attach: true a function can be bound to gadget
+ * @has_dep: true if there is a dependent module
+ *
+ */
+struct f_tcm_opts {
+	struct usb_function_instance	func_inst;
+	struct module			*dependent;
+	struct mutex			dep_lock;
+	bool				ready;
+	bool				can_attach;
+	bool				has_dep;
+
+	/*
+	 * Callbacks to be removed when legacy tcm gadget disappears.
+	 *
+	 * If you use the new function registration interface
+	 * programmatically, you MUST set these callbacks to
+	 * something sensible (e.g. probe/remove the composite).
+	 */
+	int (*tcm_register_callback)(struct usb_function_instance *);
+	void (*tcm_unregister_callback)(struct usb_function_instance *);
+};
+
+#endif /* U_TCM_H */
diff --git a/drivers/usb/gadget/function/u_uac1.h b/drivers/usb/gadget/function/u_uac1.h
new file mode 100644
index 000000000..f7a616760
--- /dev/null
+++ b/drivers/usb/gadget/function/u_uac1.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * u_uac1.h - Utility definitions for UAC1 function
+ *
+ * Copyright (C) 2016 Ruslan Bilovol <ruslan.bilovol@gmail.com>
+ */
+
+#ifndef __U_UAC1_H
+#define __U_UAC1_H
+
+#include <linux/usb/composite.h>
+#include "uac_common.h"
+
+#define UAC1_OUT_EP_MAX_PACKET_SIZE	200
+#define UAC1_DEF_CCHMASK	0x3
+#define UAC1_DEF_CSRATE		48000
+#define UAC1_DEF_CSSIZE		2
+#define UAC1_DEF_PCHMASK	0x3
+#define UAC1_DEF_PSRATE		48000
+#define UAC1_DEF_PSSIZE		2
+#define UAC1_DEF_REQ_NUM	2
+#define UAC1_DEF_INT_REQ_NUM	10
+
+#define UAC1_DEF_MUTE_PRESENT	1
+#define UAC1_DEF_VOLUME_PRESENT 1
+#define UAC1_DEF_MIN_DB		(-100*256)	/* -100 dB */
+#define UAC1_DEF_MAX_DB		0		/* 0 dB */
+#define UAC1_DEF_RES_DB		(1*256)	/* 1 dB */
+
+
+struct f_uac1_opts {
+	struct usb_function_instance	func_inst;
+	int				c_chmask;
+	int				c_srates[UAC_MAX_RATES];
+	int				c_ssize;
+	int				p_chmask;
+	int				p_srates[UAC_MAX_RATES];
+	int				p_ssize;
+
+	bool			p_mute_present;
+	bool			p_volume_present;
+	s16				p_volume_min;
+	s16				p_volume_max;
+	s16				p_volume_res;
+
+	bool			c_mute_present;
+	bool			c_volume_present;
+	s16				c_volume_min;
+	s16				c_volume_max;
+	s16				c_volume_res;
+
+	int				req_number;
+	unsigned			bound:1;
+
+	char			function_name[32];
+
+	struct mutex			lock;
+	int				refcnt;
+};
+
+#endif /* __U_UAC1_H */
diff --git a/drivers/usb/gadget/function/u_uac1_legacy.c b/drivers/usb/gadget/function/u_uac1_legacy.c
new file mode 100644
index 000000000..dd21c2515
--- /dev/null
+++ b/drivers/usb/gadget/function/u_uac1_legacy.c
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * u_uac1.c -- ALSA audio utilities for Gadget stack
+ *
+ * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ * Copyright (C) 2008 Analog Devices, Inc
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/random.h>
+#include <linux/syscalls.h>
+
+#include "u_uac1_legacy.h"
+
+/*
+ * This component encapsulates the ALSA devices for USB audio gadget
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Some ALSA internal helper functions
+ */
+static int snd_interval_refine_set(struct snd_interval *i, unsigned int val)
+{
+	struct snd_interval t;
+	t.empty = 0;
+	t.min = t.max = val;
+	t.openmin = t.openmax = 0;
+	t.integer = 1;
+	return snd_interval_refine(i, &t);
+}
+
+static int _snd_pcm_hw_param_set(struct snd_pcm_hw_params *params,
+				 snd_pcm_hw_param_t var, unsigned int val,
+				 int dir)
+{
+	int changed;
+	if (hw_is_mask(var)) {
+		struct snd_mask *m = hw_param_mask(params, var);
+		if (val == 0 && dir < 0) {
+			changed = -EINVAL;
+			snd_mask_none(m);
+		} else {
+			if (dir > 0)
+				val++;
+			else if (dir < 0)
+				val--;
+			changed = snd_mask_refine_set(
+					hw_param_mask(params, var), val);
+		}
+	} else if (hw_is_interval(var)) {
+		struct snd_interval *i = hw_param_interval(params, var);
+		if (val == 0 && dir < 0) {
+			changed = -EINVAL;
+			snd_interval_none(i);
+		} else if (dir == 0)
+			changed = snd_interval_refine_set(i, val);
+		else {
+			struct snd_interval t;
+			t.openmin = 1;
+			t.openmax = 1;
+			t.empty = 0;
+			t.integer = 0;
+			if (dir < 0) {
+				t.min = val - 1;
+				t.max = val;
+			} else {
+				t.min = val;
+				t.max = val+1;
+			}
+			changed = snd_interval_refine(i, &t);
+		}
+	} else
+		return -EINVAL;
+	if (changed) {
+		params->cmask |= 1 << var;
+		params->rmask |= 1 << var;
+	}
+	return changed;
+}
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Set default hardware params
+ */
+static int playback_default_hw_params(struct gaudio_snd_dev *snd)
+{
+	struct snd_pcm_substream *substream = snd->substream;
+	struct snd_pcm_hw_params *params;
+	snd_pcm_sframes_t result;
+
+       /*
+	* SNDRV_PCM_ACCESS_RW_INTERLEAVED,
+	* SNDRV_PCM_FORMAT_S16_LE
+	* CHANNELS: 2
+	* RATE: 48000
+	*/
+	snd->access = SNDRV_PCM_ACCESS_RW_INTERLEAVED;
+	snd->format = SNDRV_PCM_FORMAT_S16_LE;
+	snd->channels = 2;
+	snd->rate = 48000;
+
+	params = kzalloc(sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	_snd_pcm_hw_params_any(params);
+	_snd_pcm_hw_param_set(params, SNDRV_PCM_HW_PARAM_ACCESS,
+			snd->access, 0);
+	_snd_pcm_hw_param_set(params, SNDRV_PCM_HW_PARAM_FORMAT,
+			snd->format, 0);
+	_snd_pcm_hw_param_set(params, SNDRV_PCM_HW_PARAM_CHANNELS,
+			snd->channels, 0);
+	_snd_pcm_hw_param_set(params, SNDRV_PCM_HW_PARAM_RATE,
+			snd->rate, 0);
+
+	snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
+	snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_HW_PARAMS, params);
+
+	result = snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_PREPARE, NULL);
+	if (result < 0) {
+		ERROR(snd->card,
+			"Preparing sound card failed: %d\n", (int)result);
+		kfree(params);
+		return result;
+	}
+
+	/* Store the hardware parameters */
+	snd->access = params_access(params);
+	snd->format = params_format(params);
+	snd->channels = params_channels(params);
+	snd->rate = params_rate(params);
+
+	kfree(params);
+
+	INFO(snd->card,
+		"Hardware params: access %x, format %x, channels %d, rate %d\n",
+		snd->access, snd->format, snd->channels, snd->rate);
+
+	return 0;
+}
+
+/*
+ * Playback audio buffer data by ALSA PCM device
+ */
+size_t u_audio_playback(struct gaudio *card, void *buf, size_t count)
+{
+	struct gaudio_snd_dev	*snd = &card->playback;
+	struct snd_pcm_substream *substream = snd->substream;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	ssize_t result;
+	snd_pcm_sframes_t frames;
+
+try_again:
+	if (runtime->state == SNDRV_PCM_STATE_XRUN ||
+		runtime->state == SNDRV_PCM_STATE_SUSPENDED) {
+		result = snd_pcm_kernel_ioctl(substream,
+				SNDRV_PCM_IOCTL_PREPARE, NULL);
+		if (result < 0) {
+			ERROR(card, "Preparing sound card failed: %d\n",
+					(int)result);
+			return result;
+		}
+	}
+
+	frames = bytes_to_frames(runtime, count);
+	result = snd_pcm_kernel_write(snd->substream, buf, frames);
+	if (result != frames) {
+		ERROR(card, "Playback error: %d\n", (int)result);
+		goto try_again;
+	}
+
+	return 0;
+}
+
+int u_audio_get_playback_channels(struct gaudio *card)
+{
+	return card->playback.channels;
+}
+
+int u_audio_get_playback_rate(struct gaudio *card)
+{
+	return card->playback.rate;
+}
+
+/*
+ * Open ALSA PCM and control device files
+ * Initial the PCM or control device
+ */
+static int gaudio_open_snd_dev(struct gaudio *card)
+{
+	struct snd_pcm_file *pcm_file;
+	struct gaudio_snd_dev *snd;
+	struct f_uac1_legacy_opts *opts;
+	char *fn_play, *fn_cap, *fn_cntl;
+
+	opts = container_of(card->func.fi, struct f_uac1_legacy_opts,
+			    func_inst);
+	fn_play = opts->fn_play;
+	fn_cap = opts->fn_cap;
+	fn_cntl = opts->fn_cntl;
+
+	/* Open control device */
+	snd = &card->control;
+	snd->filp = filp_open(fn_cntl, O_RDWR, 0);
+	if (IS_ERR(snd->filp)) {
+		int ret = PTR_ERR(snd->filp);
+		ERROR(card, "unable to open sound control device file: %s\n",
+				fn_cntl);
+		snd->filp = NULL;
+		return ret;
+	}
+	snd->card = card;
+
+	/* Open PCM playback device and setup substream */
+	snd = &card->playback;
+	snd->filp = filp_open(fn_play, O_WRONLY, 0);
+	if (IS_ERR(snd->filp)) {
+		int ret = PTR_ERR(snd->filp);
+
+		ERROR(card, "No such PCM playback device: %s\n", fn_play);
+		snd->filp = NULL;
+		return ret;
+	}
+	pcm_file = snd->filp->private_data;
+	snd->substream = pcm_file->substream;
+	snd->card = card;
+	playback_default_hw_params(snd);
+
+	/* Open PCM capture device and setup substream */
+	snd = &card->capture;
+	snd->filp = filp_open(fn_cap, O_RDONLY, 0);
+	if (IS_ERR(snd->filp)) {
+		ERROR(card, "No such PCM capture device: %s\n", fn_cap);
+		snd->substream = NULL;
+		snd->card = NULL;
+		snd->filp = NULL;
+	} else {
+		pcm_file = snd->filp->private_data;
+		snd->substream = pcm_file->substream;
+		snd->card = card;
+	}
+
+	return 0;
+}
+
+/*
+ * Close ALSA PCM and control device files
+ */
+static int gaudio_close_snd_dev(struct gaudio *gau)
+{
+	struct gaudio_snd_dev	*snd;
+
+	/* Close control device */
+	snd = &gau->control;
+	if (snd->filp)
+		filp_close(snd->filp, NULL);
+
+	/* Close PCM playback device and setup substream */
+	snd = &gau->playback;
+	if (snd->filp)
+		filp_close(snd->filp, NULL);
+
+	/* Close PCM capture device and setup substream */
+	snd = &gau->capture;
+	if (snd->filp)
+		filp_close(snd->filp, NULL);
+
+	return 0;
+}
+
+/*
+ * gaudio_setup - setup ALSA interface and preparing for USB transfer
+ *
+ * This sets up PCM, mixer or MIDI ALSA devices fore USB gadget using.
+ *
+ * Returns negative errno, or zero on success
+ */
+int gaudio_setup(struct gaudio *card)
+{
+	int	ret;
+
+	ret = gaudio_open_snd_dev(card);
+	if (ret)
+		ERROR(card, "we need at least one control device\n");
+
+	return ret;
+
+}
+
+/*
+ * gaudio_cleanup - remove ALSA device interface
+ *
+ * This is called to free all resources allocated by @gaudio_setup().
+ */
+void gaudio_cleanup(struct gaudio *the_card)
+{
+	if (the_card)
+		gaudio_close_snd_dev(the_card);
+}
+
diff --git a/drivers/usb/gadget/function/u_uac1_legacy.h b/drivers/usb/gadget/function/u_uac1_legacy.h
new file mode 100644
index 000000000..b5df9bcbb
--- /dev/null
+++ b/drivers/usb/gadget/function/u_uac1_legacy.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * u_uac1.h -- interface to USB gadget "ALSA AUDIO" utilities
+ *
+ * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ * Copyright (C) 2008 Analog Devices, Inc
+ */
+
+#ifndef __U_UAC1_LEGACY_H
+#define __U_UAC1_LEGACY_H
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/composite.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#define FILE_PCM_PLAYBACK	"/dev/snd/pcmC0D0p"
+#define FILE_PCM_CAPTURE	"/dev/snd/pcmC0D0c"
+#define FILE_CONTROL		"/dev/snd/controlC0"
+
+#define UAC1_OUT_EP_MAX_PACKET_SIZE	200
+#define UAC1_REQ_COUNT			256
+#define UAC1_AUDIO_BUF_SIZE		48000
+
+/*
+ * This represents the USB side of an audio card device, managed by a USB
+ * function which provides control and stream interfaces.
+ */
+
+struct gaudio_snd_dev {
+	struct gaudio			*card;
+	struct file			*filp;
+	struct snd_pcm_substream	*substream;
+	int				access;
+	int				format;
+	int				channels;
+	int				rate;
+};
+
+struct gaudio {
+	struct usb_function		func;
+	struct usb_gadget		*gadget;
+
+	/* ALSA sound device interfaces */
+	struct gaudio_snd_dev		control;
+	struct gaudio_snd_dev		playback;
+	struct gaudio_snd_dev		capture;
+
+	/* TODO */
+};
+
+struct f_uac1_legacy_opts {
+	struct usb_function_instance	func_inst;
+	int				req_buf_size;
+	int				req_count;
+	int				audio_buf_size;
+	char				*fn_play;
+	char				*fn_cap;
+	char				*fn_cntl;
+	unsigned			bound:1;
+	unsigned			fn_play_alloc:1;
+	unsigned			fn_cap_alloc:1;
+	unsigned			fn_cntl_alloc:1;
+	struct mutex			lock;
+	int				refcnt;
+};
+
+int gaudio_setup(struct gaudio *card);
+void gaudio_cleanup(struct gaudio *the_card);
+
+size_t u_audio_playback(struct gaudio *card, void *buf, size_t count);
+int u_audio_get_playback_channels(struct gaudio *card);
+int u_audio_get_playback_rate(struct gaudio *card);
+
+#endif /* __U_UAC1_LEGACY_H */
diff --git a/drivers/usb/gadget/function/u_uac2.h b/drivers/usb/gadget/function/u_uac2.h
new file mode 100644
index 000000000..0510c9bad
--- /dev/null
+++ b/drivers/usb/gadget/function/u_uac2.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * u_uac2.h
+ *
+ * Utility definitions for UAC2 function
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#ifndef U_UAC2_H
+#define U_UAC2_H
+
+#include <linux/usb/composite.h>
+#include "uac_common.h"
+
+#define UAC2_DEF_PCHMASK 0x3
+#define UAC2_DEF_PSRATE 48000
+#define UAC2_DEF_PSSIZE 2
+#define UAC2_DEF_PHSBINT 0
+#define UAC2_DEF_CCHMASK 0x3
+#define UAC2_DEF_CSRATE 64000
+#define UAC2_DEF_CSSIZE 2
+#define UAC2_DEF_CHSBINT 0
+#define UAC2_DEF_CSYNC		USB_ENDPOINT_SYNC_ASYNC
+
+#define UAC2_DEF_MUTE_PRESENT	1
+#define UAC2_DEF_VOLUME_PRESENT 1
+#define UAC2_DEF_MIN_DB		(-100*256)	/* -100 dB */
+#define UAC2_DEF_MAX_DB		0		/* 0 dB */
+#define UAC2_DEF_RES_DB		(1*256)		/* 1 dB */
+
+#define UAC2_DEF_REQ_NUM 2
+#define UAC2_DEF_INT_REQ_NUM	10
+
+struct f_uac2_opts {
+	struct usb_function_instance	func_inst;
+	int				p_chmask;
+	int				p_srates[UAC_MAX_RATES];
+	int				p_ssize;
+	u8				p_hs_bint;
+	int				c_chmask;
+	int				c_srates[UAC_MAX_RATES];
+	int				c_ssize;
+	int				c_sync;
+	u8				c_hs_bint;
+
+	bool			p_mute_present;
+	bool			p_volume_present;
+	s16				p_volume_min;
+	s16				p_volume_max;
+	s16				p_volume_res;
+
+	bool			c_mute_present;
+	bool			c_volume_present;
+	s16				c_volume_min;
+	s16				c_volume_max;
+	s16				c_volume_res;
+
+	int				req_number;
+	int				fb_max;
+	bool			bound;
+
+	char			function_name[32];
+
+	struct mutex			lock;
+	int				refcnt;
+};
+
+#endif
diff --git a/drivers/usb/gadget/function/u_uvc.h b/drivers/usb/gadget/function/u_uvc.h
new file mode 100644
index 000000000..24b8681b0
--- /dev/null
+++ b/drivers/usb/gadget/function/u_uvc.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * u_uvc.h
+ *
+ * Utility definitions for the uvc function
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#ifndef U_UVC_H
+#define U_UVC_H
+
+#include <linux/mutex.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/video.h>
+
+#define fi_to_f_uvc_opts(f)	container_of(f, struct f_uvc_opts, func_inst)
+
+struct f_uvc_opts {
+	struct usb_function_instance			func_inst;
+	unsigned int					streaming_interval;
+	unsigned int					streaming_maxpacket;
+	unsigned int					streaming_maxburst;
+
+	unsigned int					control_interface;
+	unsigned int					streaming_interface;
+	char						function_name[32];
+
+	/*
+	 * Control descriptors array pointers for full-/high-speed and
+	 * super-speed. They point by default to the uvc_fs_control_cls and
+	 * uvc_ss_control_cls arrays respectively. Legacy gadgets must
+	 * override them in their gadget bind callback.
+	 */
+	const struct uvc_descriptor_header * const	*fs_control;
+	const struct uvc_descriptor_header * const	*ss_control;
+
+	/*
+	 * Streaming descriptors array pointers for full-speed, high-speed and
+	 * super-speed. They will point to the uvc_[fhs]s_streaming_cls arrays
+	 * for configfs-based gadgets. Legacy gadgets must initialize them in
+	 * their gadget bind callback.
+	 */
+	const struct uvc_descriptor_header * const	*fs_streaming;
+	const struct uvc_descriptor_header * const	*hs_streaming;
+	const struct uvc_descriptor_header * const	*ss_streaming;
+
+	/* Default control descriptors for configfs-based gadgets. */
+	struct uvc_camera_terminal_descriptor		uvc_camera_terminal;
+	struct uvc_processing_unit_descriptor		uvc_processing;
+	struct uvc_output_terminal_descriptor		uvc_output_terminal;
+	struct uvc_color_matching_descriptor		uvc_color_matching;
+
+	/*
+	 * Control descriptors pointers arrays for full-/high-speed and
+	 * super-speed. The first element is a configurable control header
+	 * descriptor, the other elements point to the fixed default control
+	 * descriptors. Used by configfs only, must not be touched by legacy
+	 * gadgets.
+	 */
+	struct uvc_descriptor_header			*uvc_fs_control_cls[5];
+	struct uvc_descriptor_header			*uvc_ss_control_cls[5];
+
+	/*
+	 * Streaming descriptors for full-speed, high-speed and super-speed.
+	 * Used by configfs only, must not be touched by legacy gadgets. The
+	 * arrays are allocated at runtime as the number of descriptors isn't
+	 * known in advance.
+	 */
+	struct uvc_descriptor_header			**uvc_fs_streaming_cls;
+	struct uvc_descriptor_header			**uvc_hs_streaming_cls;
+	struct uvc_descriptor_header			**uvc_ss_streaming_cls;
+
+	/*
+	 * Read/write access to configfs attributes is handled by configfs.
+	 *
+	 * This lock protects the descriptors from concurrent access by
+	 * read/write and symlink creation/removal.
+	 */
+	struct mutex			lock;
+	int				refcnt;
+};
+
+#endif /* U_UVC_H */
diff --git a/drivers/usb/gadget/function/uac_common.h b/drivers/usb/gadget/function/uac_common.h
new file mode 100644
index 000000000..3ecf89d6e
--- /dev/null
+++ b/drivers/usb/gadget/function/uac_common.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ */
+
+#ifndef UAC_COMMON_H
+#define UAC_COMMON_H
+
+#define UAC_MAX_RATES 10 /* maximum number of rates configurable by f_uac1/2 */
+#endif
diff --git a/drivers/usb/gadget/function/uvc.h b/drivers/usb/gadget/function/uvc.h
new file mode 100644
index 000000000..40226b1f7
--- /dev/null
+++ b/drivers/usb/gadget/function/uvc.h
@@ -0,0 +1,184 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *	uvc_gadget.h  --  USB Video Class Gadget driver
+ *
+ *	Copyright (C) 2009-2010
+ *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#ifndef _UVC_GADGET_H_
+#define _UVC_GADGET_H_
+
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/usb/composite.h>
+#include <linux/videodev2.h>
+#include <linux/wait.h>
+
+#include <media/v4l2-device.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-fh.h>
+
+#include "uvc_queue.h"
+
+struct usb_ep;
+struct usb_request;
+struct uvc_descriptor_header;
+struct uvc_device;
+
+/* ------------------------------------------------------------------------
+ * Debugging, printing and logging
+ */
+
+#define UVC_TRACE_PROBE				(1 << 0)
+#define UVC_TRACE_DESCR				(1 << 1)
+#define UVC_TRACE_CONTROL			(1 << 2)
+#define UVC_TRACE_FORMAT			(1 << 3)
+#define UVC_TRACE_CAPTURE			(1 << 4)
+#define UVC_TRACE_CALLS				(1 << 5)
+#define UVC_TRACE_IOCTL				(1 << 6)
+#define UVC_TRACE_FRAME				(1 << 7)
+#define UVC_TRACE_SUSPEND			(1 << 8)
+#define UVC_TRACE_STATUS			(1 << 9)
+
+#define UVC_WARN_MINMAX				0
+#define UVC_WARN_PROBE_DEF			1
+
+extern unsigned int uvc_gadget_trace_param;
+
+#define uvc_trace(flag, msg...) \
+	do { \
+		if (uvc_gadget_trace_param & flag) \
+			printk(KERN_DEBUG "uvcvideo: " msg); \
+	} while (0)
+
+#define uvcg_dbg(f, fmt, args...) \
+	dev_dbg(&(f)->config->cdev->gadget->dev, "%s: " fmt, (f)->name, ##args)
+#define uvcg_info(f, fmt, args...) \
+	dev_info(&(f)->config->cdev->gadget->dev, "%s: " fmt, (f)->name, ##args)
+#define uvcg_warn(f, fmt, args...) \
+	dev_warn(&(f)->config->cdev->gadget->dev, "%s: " fmt, (f)->name, ##args)
+#define uvcg_err(f, fmt, args...) \
+	dev_err(&(f)->config->cdev->gadget->dev, "%s: " fmt, (f)->name, ##args)
+
+/* ------------------------------------------------------------------------
+ * Driver specific constants
+ */
+
+#define UVC_MAX_REQUEST_SIZE			64
+#define UVC_MAX_EVENTS				4
+
+#define UVCG_REQUEST_HEADER_LEN			12
+
+/* ------------------------------------------------------------------------
+ * Structures
+ */
+struct uvc_request {
+	struct usb_request *req;
+	u8 *req_buffer;
+	struct uvc_video *video;
+	struct sg_table sgt;
+	u8 header[UVCG_REQUEST_HEADER_LEN];
+	struct uvc_buffer *last_buf;
+};
+
+struct uvc_video {
+	struct uvc_device *uvc;
+	struct usb_ep *ep;
+
+	struct work_struct pump;
+	struct workqueue_struct *async_wq;
+
+	/* Frame parameters */
+	u8 bpp;
+	u32 fcc;
+	unsigned int width;
+	unsigned int height;
+	unsigned int imagesize;
+	struct mutex mutex;	/* protects frame parameters */
+
+	unsigned int uvc_num_requests;
+
+	/* Requests */
+	unsigned int req_size;
+	struct uvc_request *ureq;
+	struct list_head req_free;
+	spinlock_t req_lock;
+
+	unsigned int req_int_count;
+
+	void (*encode) (struct usb_request *req, struct uvc_video *video,
+			struct uvc_buffer *buf);
+
+	/* Context data used by the completion handler */
+	__u32 payload_size;
+	__u32 max_payload_size;
+
+	struct uvc_video_queue queue;
+	unsigned int fid;
+};
+
+enum uvc_state {
+	UVC_STATE_DISCONNECTED,
+	UVC_STATE_CONNECTED,
+	UVC_STATE_STREAMING,
+};
+
+struct uvc_device {
+	struct video_device vdev;
+	struct v4l2_device v4l2_dev;
+	enum uvc_state state;
+	struct usb_function func;
+	struct uvc_video video;
+	bool func_connected;
+	wait_queue_head_t func_connected_queue;
+
+	struct uvcg_streaming_header *header;
+
+	/* Descriptors */
+	struct {
+		const struct uvc_descriptor_header * const *fs_control;
+		const struct uvc_descriptor_header * const *ss_control;
+		const struct uvc_descriptor_header * const *fs_streaming;
+		const struct uvc_descriptor_header * const *hs_streaming;
+		const struct uvc_descriptor_header * const *ss_streaming;
+	} desc;
+
+	unsigned int control_intf;
+	struct usb_ep *control_ep;
+	struct usb_request *control_req;
+	void *control_buf;
+
+	unsigned int streaming_intf;
+
+	/* Events */
+	unsigned int event_length;
+	unsigned int event_setup_out : 1;
+};
+
+static inline struct uvc_device *to_uvc(struct usb_function *f)
+{
+	return container_of(f, struct uvc_device, func);
+}
+
+struct uvc_file_handle {
+	struct v4l2_fh vfh;
+	struct uvc_video *device;
+	bool is_uvc_app_handle;
+};
+
+#define to_uvc_file_handle(handle) \
+	container_of(handle, struct uvc_file_handle, vfh)
+
+/* ------------------------------------------------------------------------
+ * Functions
+ */
+
+extern void uvc_function_setup_continue(struct uvc_device *uvc);
+extern void uvc_endpoint_stream(struct uvc_device *dev);
+
+extern void uvc_function_connect(struct uvc_device *uvc);
+extern void uvc_function_disconnect(struct uvc_device *uvc);
+
+#endif /* _UVC_GADGET_H_ */
diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c
new file mode 100644
index 000000000..015a7bbd9
--- /dev/null
+++ b/drivers/usb/gadget/function/uvc_configfs.c
@@ -0,0 +1,2490 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * uvc_configfs.c
+ *
+ * Configfs support for the uvc function.
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#include "uvc_configfs.h"
+
+#include <linux/sort.h>
+
+/* -----------------------------------------------------------------------------
+ * Global Utility Structures and Macros
+ */
+
+#define UVC_ATTR(prefix, cname, aname) \
+static struct configfs_attribute prefix##attr_##cname = { \
+	.ca_name	= __stringify(aname),				\
+	.ca_mode	= S_IRUGO | S_IWUGO,				\
+	.ca_owner	= THIS_MODULE,					\
+	.show		= prefix##cname##_show,				\
+	.store		= prefix##cname##_store,			\
+}
+
+#define UVC_ATTR_RO(prefix, cname, aname) \
+static struct configfs_attribute prefix##attr_##cname = { \
+	.ca_name	= __stringify(aname),				\
+	.ca_mode	= S_IRUGO,					\
+	.ca_owner	= THIS_MODULE,					\
+	.show		= prefix##cname##_show,				\
+}
+
+#define le8_to_cpu(x)	(x)
+#define cpu_to_le8(x)	(x)
+
+static int uvcg_config_compare_u32(const void *l, const void *r)
+{
+	u32 li = *(const u32 *)l;
+	u32 ri = *(const u32 *)r;
+
+	return li < ri ? -1 : li == ri ? 0 : 1;
+}
+
+struct uvcg_config_group_type {
+	struct config_item_type type;
+	const char *name;
+	const struct uvcg_config_group_type **children;
+	int (*create_children)(struct config_group *group);
+};
+
+static void uvcg_config_item_release(struct config_item *item)
+{
+	struct config_group *group = to_config_group(item);
+
+	kfree(group);
+}
+
+static struct configfs_item_operations uvcg_config_item_ops = {
+	.release	= uvcg_config_item_release,
+};
+
+static int uvcg_config_create_group(struct config_group *parent,
+				    const struct uvcg_config_group_type *type);
+
+static int uvcg_config_create_children(struct config_group *group,
+				const struct uvcg_config_group_type *type)
+{
+	const struct uvcg_config_group_type **child;
+	int ret;
+
+	if (type->create_children)
+		return type->create_children(group);
+
+	for (child = type->children; child && *child; ++child) {
+		ret = uvcg_config_create_group(group, *child);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int uvcg_config_create_group(struct config_group *parent,
+				    const struct uvcg_config_group_type *type)
+{
+	struct config_group *group;
+
+	group = kzalloc(sizeof(*group), GFP_KERNEL);
+	if (!group)
+		return -ENOMEM;
+
+	config_group_init_type_name(group, type->name, &type->type);
+	configfs_add_default_group(group, parent);
+
+	return uvcg_config_create_children(group, type);
+}
+
+static void uvcg_config_remove_children(struct config_group *group)
+{
+	struct config_group *child, *n;
+
+	list_for_each_entry_safe(child, n, &group->default_groups, group_entry) {
+		list_del(&child->group_entry);
+		uvcg_config_remove_children(child);
+		config_item_put(&child->cg_item);
+	}
+}
+
+/* -----------------------------------------------------------------------------
+ * control/header/<NAME>
+ * control/header
+ */
+
+#define UVCG_CTRL_HDR_ATTR(cname, aname, bits, limit)			\
+static ssize_t uvcg_control_header_##cname##_show(			\
+	struct config_item *item, char *page)				\
+{									\
+	struct uvcg_control_header *ch = to_uvcg_control_header(item);	\
+	struct f_uvc_opts *opts;					\
+	struct config_item *opts_item;					\
+	struct mutex *su_mutex = &ch->item.ci_group->cg_subsys->su_mutex;\
+	int result;							\
+									\
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */	\
+									\
+	opts_item = ch->item.ci_parent->ci_parent->ci_parent;		\
+	opts = to_f_uvc_opts(opts_item);				\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%u\n", le##bits##_to_cpu(ch->desc.aname));\
+	mutex_unlock(&opts->lock);					\
+									\
+	mutex_unlock(su_mutex);						\
+	return result;							\
+}									\
+									\
+static ssize_t								\
+uvcg_control_header_##cname##_store(struct config_item *item,		\
+			   const char *page, size_t len)		\
+{									\
+	struct uvcg_control_header *ch = to_uvcg_control_header(item);	\
+	struct f_uvc_opts *opts;					\
+	struct config_item *opts_item;					\
+	struct mutex *su_mutex = &ch->item.ci_group->cg_subsys->su_mutex;\
+	int ret;							\
+	u##bits num;							\
+									\
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */	\
+									\
+	opts_item = ch->item.ci_parent->ci_parent->ci_parent;		\
+	opts = to_f_uvc_opts(opts_item);				\
+									\
+	mutex_lock(&opts->lock);					\
+	if (ch->linked || opts->refcnt) {				\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	ret = kstrtou##bits(page, 0, &num);				\
+	if (ret)							\
+		goto end;						\
+									\
+	if (num > limit) {						\
+		ret = -EINVAL;						\
+		goto end;						\
+	}								\
+	ch->desc.aname = cpu_to_le##bits(num);				\
+	ret = len;							\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	mutex_unlock(su_mutex);						\
+	return ret;							\
+}									\
+									\
+UVC_ATTR(uvcg_control_header_, cname, aname)
+
+UVCG_CTRL_HDR_ATTR(bcd_uvc, bcdUVC, 16, 0xffff);
+
+UVCG_CTRL_HDR_ATTR(dw_clock_frequency, dwClockFrequency, 32, 0x7fffffff);
+
+#undef UVCG_CTRL_HDR_ATTR
+
+static struct configfs_attribute *uvcg_control_header_attrs[] = {
+	&uvcg_control_header_attr_bcd_uvc,
+	&uvcg_control_header_attr_dw_clock_frequency,
+	NULL,
+};
+
+static const struct config_item_type uvcg_control_header_type = {
+	.ct_item_ops	= &uvcg_config_item_ops,
+	.ct_attrs	= uvcg_control_header_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_item *uvcg_control_header_make(struct config_group *group,
+						    const char *name)
+{
+	struct uvcg_control_header *h;
+
+	h = kzalloc(sizeof(*h), GFP_KERNEL);
+	if (!h)
+		return ERR_PTR(-ENOMEM);
+
+	h->desc.bLength			= UVC_DT_HEADER_SIZE(1);
+	h->desc.bDescriptorType		= USB_DT_CS_INTERFACE;
+	h->desc.bDescriptorSubType	= UVC_VC_HEADER;
+	h->desc.bcdUVC			= cpu_to_le16(0x0110);
+	h->desc.dwClockFrequency	= cpu_to_le32(48000000);
+
+	config_item_init_type_name(&h->item, name, &uvcg_control_header_type);
+
+	return &h->item;
+}
+
+static struct configfs_group_operations uvcg_control_header_grp_ops = {
+	.make_item		= uvcg_control_header_make,
+};
+
+static const struct uvcg_config_group_type uvcg_control_header_grp_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_group_ops	= &uvcg_control_header_grp_ops,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "header",
+};
+
+/* -----------------------------------------------------------------------------
+ * control/processing/default
+ */
+
+#define UVCG_DEFAULT_PROCESSING_ATTR(cname, aname, bits)		\
+static ssize_t uvcg_default_processing_##cname##_show(			\
+	struct config_item *item, char *page)				\
+{									\
+	struct config_group *group = to_config_group(item);		\
+	struct f_uvc_opts *opts;					\
+	struct config_item *opts_item;					\
+	struct mutex *su_mutex = &group->cg_subsys->su_mutex;		\
+	struct uvc_processing_unit_descriptor *pd;			\
+	int result;							\
+									\
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */	\
+									\
+	opts_item = group->cg_item.ci_parent->ci_parent->ci_parent;	\
+	opts = to_f_uvc_opts(opts_item);				\
+	pd = &opts->uvc_processing;					\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%u\n", le##bits##_to_cpu(pd->aname));	\
+	mutex_unlock(&opts->lock);					\
+									\
+	mutex_unlock(su_mutex);						\
+	return result;							\
+}									\
+									\
+UVC_ATTR_RO(uvcg_default_processing_, cname, aname)
+
+UVCG_DEFAULT_PROCESSING_ATTR(b_unit_id, bUnitID, 8);
+UVCG_DEFAULT_PROCESSING_ATTR(b_source_id, bSourceID, 8);
+UVCG_DEFAULT_PROCESSING_ATTR(w_max_multiplier, wMaxMultiplier, 16);
+UVCG_DEFAULT_PROCESSING_ATTR(i_processing, iProcessing, 8);
+
+#undef UVCG_DEFAULT_PROCESSING_ATTR
+
+static ssize_t uvcg_default_processing_bm_controls_show(
+	struct config_item *item, char *page)
+{
+	struct config_group *group = to_config_group(item);
+	struct f_uvc_opts *opts;
+	struct config_item *opts_item;
+	struct mutex *su_mutex = &group->cg_subsys->su_mutex;
+	struct uvc_processing_unit_descriptor *pd;
+	int result, i;
+	char *pg = page;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	opts_item = group->cg_item.ci_parent->ci_parent->ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+	pd = &opts->uvc_processing;
+
+	mutex_lock(&opts->lock);
+	for (result = 0, i = 0; i < pd->bControlSize; ++i) {
+		result += sprintf(pg, "%u\n", pd->bmControls[i]);
+		pg = page + result;
+	}
+	mutex_unlock(&opts->lock);
+
+	mutex_unlock(su_mutex);
+
+	return result;
+}
+
+UVC_ATTR_RO(uvcg_default_processing_, bm_controls, bmControls);
+
+static struct configfs_attribute *uvcg_default_processing_attrs[] = {
+	&uvcg_default_processing_attr_b_unit_id,
+	&uvcg_default_processing_attr_b_source_id,
+	&uvcg_default_processing_attr_w_max_multiplier,
+	&uvcg_default_processing_attr_bm_controls,
+	&uvcg_default_processing_attr_i_processing,
+	NULL,
+};
+
+static const struct uvcg_config_group_type uvcg_default_processing_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_attrs	= uvcg_default_processing_attrs,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "default",
+};
+
+/* -----------------------------------------------------------------------------
+ * control/processing
+ */
+
+static const struct uvcg_config_group_type uvcg_processing_grp_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "processing",
+	.children = (const struct uvcg_config_group_type*[]) {
+		&uvcg_default_processing_type,
+		NULL,
+	},
+};
+
+/* -----------------------------------------------------------------------------
+ * control/terminal/camera/default
+ */
+
+#define UVCG_DEFAULT_CAMERA_ATTR(cname, aname, bits)			\
+static ssize_t uvcg_default_camera_##cname##_show(			\
+	struct config_item *item, char *page)				\
+{									\
+	struct config_group *group = to_config_group(item);		\
+	struct f_uvc_opts *opts;					\
+	struct config_item *opts_item;					\
+	struct mutex *su_mutex = &group->cg_subsys->su_mutex;		\
+	struct uvc_camera_terminal_descriptor *cd;			\
+	int result;							\
+									\
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */	\
+									\
+	opts_item = group->cg_item.ci_parent->ci_parent->ci_parent->	\
+			ci_parent;					\
+	opts = to_f_uvc_opts(opts_item);				\
+	cd = &opts->uvc_camera_terminal;				\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%u\n", le##bits##_to_cpu(cd->aname));	\
+	mutex_unlock(&opts->lock);					\
+									\
+	mutex_unlock(su_mutex);						\
+									\
+	return result;							\
+}									\
+									\
+UVC_ATTR_RO(uvcg_default_camera_, cname, aname)
+
+UVCG_DEFAULT_CAMERA_ATTR(b_terminal_id, bTerminalID, 8);
+UVCG_DEFAULT_CAMERA_ATTR(w_terminal_type, wTerminalType, 16);
+UVCG_DEFAULT_CAMERA_ATTR(b_assoc_terminal, bAssocTerminal, 8);
+UVCG_DEFAULT_CAMERA_ATTR(i_terminal, iTerminal, 8);
+UVCG_DEFAULT_CAMERA_ATTR(w_objective_focal_length_min, wObjectiveFocalLengthMin,
+			 16);
+UVCG_DEFAULT_CAMERA_ATTR(w_objective_focal_length_max, wObjectiveFocalLengthMax,
+			 16);
+UVCG_DEFAULT_CAMERA_ATTR(w_ocular_focal_length, wOcularFocalLength,
+			 16);
+
+#undef UVCG_DEFAULT_CAMERA_ATTR
+
+static ssize_t uvcg_default_camera_bm_controls_show(
+	struct config_item *item, char *page)
+{
+	struct config_group *group = to_config_group(item);
+	struct f_uvc_opts *opts;
+	struct config_item *opts_item;
+	struct mutex *su_mutex = &group->cg_subsys->su_mutex;
+	struct uvc_camera_terminal_descriptor *cd;
+	int result, i;
+	char *pg = page;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	opts_item = group->cg_item.ci_parent->ci_parent->ci_parent->
+			ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+	cd = &opts->uvc_camera_terminal;
+
+	mutex_lock(&opts->lock);
+	for (result = 0, i = 0; i < cd->bControlSize; ++i) {
+		result += sprintf(pg, "%u\n", cd->bmControls[i]);
+		pg = page + result;
+	}
+	mutex_unlock(&opts->lock);
+
+	mutex_unlock(su_mutex);
+	return result;
+}
+
+UVC_ATTR_RO(uvcg_default_camera_, bm_controls, bmControls);
+
+static struct configfs_attribute *uvcg_default_camera_attrs[] = {
+	&uvcg_default_camera_attr_b_terminal_id,
+	&uvcg_default_camera_attr_w_terminal_type,
+	&uvcg_default_camera_attr_b_assoc_terminal,
+	&uvcg_default_camera_attr_i_terminal,
+	&uvcg_default_camera_attr_w_objective_focal_length_min,
+	&uvcg_default_camera_attr_w_objective_focal_length_max,
+	&uvcg_default_camera_attr_w_ocular_focal_length,
+	&uvcg_default_camera_attr_bm_controls,
+	NULL,
+};
+
+static const struct uvcg_config_group_type uvcg_default_camera_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_attrs	= uvcg_default_camera_attrs,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "default",
+};
+
+/* -----------------------------------------------------------------------------
+ * control/terminal/camera
+ */
+
+static const struct uvcg_config_group_type uvcg_camera_grp_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "camera",
+	.children = (const struct uvcg_config_group_type*[]) {
+		&uvcg_default_camera_type,
+		NULL,
+	},
+};
+
+/* -----------------------------------------------------------------------------
+ * control/terminal/output/default
+ */
+
+#define UVCG_DEFAULT_OUTPUT_ATTR(cname, aname, bits)			\
+static ssize_t uvcg_default_output_##cname##_show(			\
+	struct config_item *item, char *page)				\
+{									\
+	struct config_group *group = to_config_group(item);		\
+	struct f_uvc_opts *opts;					\
+	struct config_item *opts_item;					\
+	struct mutex *su_mutex = &group->cg_subsys->su_mutex;		\
+	struct uvc_output_terminal_descriptor *cd;			\
+	int result;							\
+									\
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */	\
+									\
+	opts_item = group->cg_item.ci_parent->ci_parent->		\
+			ci_parent->ci_parent;				\
+	opts = to_f_uvc_opts(opts_item);				\
+	cd = &opts->uvc_output_terminal;				\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%u\n", le##bits##_to_cpu(cd->aname));	\
+	mutex_unlock(&opts->lock);					\
+									\
+	mutex_unlock(su_mutex);						\
+									\
+	return result;							\
+}									\
+									\
+UVC_ATTR_RO(uvcg_default_output_, cname, aname)
+
+UVCG_DEFAULT_OUTPUT_ATTR(b_terminal_id, bTerminalID, 8);
+UVCG_DEFAULT_OUTPUT_ATTR(w_terminal_type, wTerminalType, 16);
+UVCG_DEFAULT_OUTPUT_ATTR(b_assoc_terminal, bAssocTerminal, 8);
+UVCG_DEFAULT_OUTPUT_ATTR(i_terminal, iTerminal, 8);
+
+#undef UVCG_DEFAULT_OUTPUT_ATTR
+
+static ssize_t uvcg_default_output_b_source_id_show(struct config_item *item,
+						    char *page)
+{
+	struct config_group *group = to_config_group(item);
+	struct f_uvc_opts *opts;
+	struct config_item *opts_item;
+	struct mutex *su_mutex = &group->cg_subsys->su_mutex;
+	struct uvc_output_terminal_descriptor *cd;
+	int result;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	opts_item = group->cg_item.ci_parent->ci_parent->
+			ci_parent->ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+	cd = &opts->uvc_output_terminal;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%u\n", le8_to_cpu(cd->bSourceID));
+	mutex_unlock(&opts->lock);
+
+	mutex_unlock(su_mutex);
+
+	return result;
+}
+
+static ssize_t uvcg_default_output_b_source_id_store(struct config_item *item,
+						     const char *page, size_t len)
+{
+	struct config_group *group = to_config_group(item);
+	struct f_uvc_opts *opts;
+	struct config_item *opts_item;
+	struct mutex *su_mutex = &group->cg_subsys->su_mutex;
+	struct uvc_output_terminal_descriptor *cd;
+	int result;
+	u8 num;
+
+	result = kstrtou8(page, 0, &num);
+	if (result)
+		return result;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	opts_item = group->cg_item.ci_parent->ci_parent->
+			ci_parent->ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+	cd = &opts->uvc_output_terminal;
+
+	mutex_lock(&opts->lock);
+	cd->bSourceID = num;
+	mutex_unlock(&opts->lock);
+
+	mutex_unlock(su_mutex);
+
+	return len;
+}
+UVC_ATTR(uvcg_default_output_, b_source_id, bSourceID);
+
+static struct configfs_attribute *uvcg_default_output_attrs[] = {
+	&uvcg_default_output_attr_b_terminal_id,
+	&uvcg_default_output_attr_w_terminal_type,
+	&uvcg_default_output_attr_b_assoc_terminal,
+	&uvcg_default_output_attr_b_source_id,
+	&uvcg_default_output_attr_i_terminal,
+	NULL,
+};
+
+static const struct uvcg_config_group_type uvcg_default_output_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_attrs	= uvcg_default_output_attrs,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "default",
+};
+
+/* -----------------------------------------------------------------------------
+ * control/terminal/output
+ */
+
+static const struct uvcg_config_group_type uvcg_output_grp_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "output",
+	.children = (const struct uvcg_config_group_type*[]) {
+		&uvcg_default_output_type,
+		NULL,
+	},
+};
+
+/* -----------------------------------------------------------------------------
+ * control/terminal
+ */
+
+static const struct uvcg_config_group_type uvcg_terminal_grp_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "terminal",
+	.children = (const struct uvcg_config_group_type*[]) {
+		&uvcg_camera_grp_type,
+		&uvcg_output_grp_type,
+		NULL,
+	},
+};
+
+/* -----------------------------------------------------------------------------
+ * control/class/{fs|ss}
+ */
+
+struct uvcg_control_class_group {
+	struct config_group group;
+	const char *name;
+};
+
+static inline struct uvc_descriptor_header
+**uvcg_get_ctl_class_arr(struct config_item *i, struct f_uvc_opts *o)
+{
+	struct uvcg_control_class_group *group =
+		container_of(i, struct uvcg_control_class_group,
+			     group.cg_item);
+
+	if (!strcmp(group->name, "fs"))
+		return o->uvc_fs_control_cls;
+
+	if (!strcmp(group->name, "ss"))
+		return o->uvc_ss_control_cls;
+
+	return NULL;
+}
+
+static int uvcg_control_class_allow_link(struct config_item *src,
+					 struct config_item *target)
+{
+	struct config_item *control, *header;
+	struct f_uvc_opts *opts;
+	struct mutex *su_mutex = &src->ci_group->cg_subsys->su_mutex;
+	struct uvc_descriptor_header **class_array;
+	struct uvcg_control_header *target_hdr;
+	int ret = -EINVAL;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	control = src->ci_parent->ci_parent;
+	header = config_group_find_item(to_config_group(control), "header");
+	if (!header || target->ci_parent != header)
+		goto out;
+
+	opts = to_f_uvc_opts(control->ci_parent);
+
+	mutex_lock(&opts->lock);
+
+	class_array = uvcg_get_ctl_class_arr(src, opts);
+	if (!class_array)
+		goto unlock;
+	if (opts->refcnt || class_array[0]) {
+		ret = -EBUSY;
+		goto unlock;
+	}
+
+	target_hdr = to_uvcg_control_header(target);
+	++target_hdr->linked;
+	class_array[0] = (struct uvc_descriptor_header *)&target_hdr->desc;
+	ret = 0;
+
+unlock:
+	mutex_unlock(&opts->lock);
+out:
+	config_item_put(header);
+	mutex_unlock(su_mutex);
+	return ret;
+}
+
+static void uvcg_control_class_drop_link(struct config_item *src,
+					struct config_item *target)
+{
+	struct config_item *control, *header;
+	struct f_uvc_opts *opts;
+	struct mutex *su_mutex = &src->ci_group->cg_subsys->su_mutex;
+	struct uvc_descriptor_header **class_array;
+	struct uvcg_control_header *target_hdr;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	control = src->ci_parent->ci_parent;
+	header = config_group_find_item(to_config_group(control), "header");
+	if (!header || target->ci_parent != header)
+		goto out;
+
+	opts = to_f_uvc_opts(control->ci_parent);
+
+	mutex_lock(&opts->lock);
+
+	class_array = uvcg_get_ctl_class_arr(src, opts);
+	if (!class_array || opts->refcnt)
+		goto unlock;
+
+	target_hdr = to_uvcg_control_header(target);
+	--target_hdr->linked;
+	class_array[0] = NULL;
+
+unlock:
+	mutex_unlock(&opts->lock);
+out:
+	config_item_put(header);
+	mutex_unlock(su_mutex);
+}
+
+static struct configfs_item_operations uvcg_control_class_item_ops = {
+	.release	= uvcg_config_item_release,
+	.allow_link	= uvcg_control_class_allow_link,
+	.drop_link	= uvcg_control_class_drop_link,
+};
+
+static const struct config_item_type uvcg_control_class_type = {
+	.ct_item_ops	= &uvcg_control_class_item_ops,
+	.ct_owner	= THIS_MODULE,
+};
+
+/* -----------------------------------------------------------------------------
+ * control/class
+ */
+
+static int uvcg_control_class_create_children(struct config_group *parent)
+{
+	static const char * const names[] = { "fs", "ss" };
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(names); ++i) {
+		struct uvcg_control_class_group *group;
+
+		group = kzalloc(sizeof(*group), GFP_KERNEL);
+		if (!group)
+			return -ENOMEM;
+
+		group->name = names[i];
+
+		config_group_init_type_name(&group->group, group->name,
+					    &uvcg_control_class_type);
+		configfs_add_default_group(&group->group, parent);
+	}
+
+	return 0;
+}
+
+static const struct uvcg_config_group_type uvcg_control_class_grp_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "class",
+	.create_children = uvcg_control_class_create_children,
+};
+
+/* -----------------------------------------------------------------------------
+ * control
+ */
+
+static ssize_t uvcg_default_control_b_interface_number_show(
+	struct config_item *item, char *page)
+{
+	struct config_group *group = to_config_group(item);
+	struct mutex *su_mutex = &group->cg_subsys->su_mutex;
+	struct config_item *opts_item;
+	struct f_uvc_opts *opts;
+	int result = 0;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	opts_item = item->ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+
+	mutex_lock(&opts->lock);
+	result += sprintf(page, "%u\n", opts->control_interface);
+	mutex_unlock(&opts->lock);
+
+	mutex_unlock(su_mutex);
+
+	return result;
+}
+
+UVC_ATTR_RO(uvcg_default_control_, b_interface_number, bInterfaceNumber);
+
+static struct configfs_attribute *uvcg_default_control_attrs[] = {
+	&uvcg_default_control_attr_b_interface_number,
+	NULL,
+};
+
+static const struct uvcg_config_group_type uvcg_control_grp_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_attrs	= uvcg_default_control_attrs,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "control",
+	.children = (const struct uvcg_config_group_type*[]) {
+		&uvcg_control_header_grp_type,
+		&uvcg_processing_grp_type,
+		&uvcg_terminal_grp_type,
+		&uvcg_control_class_grp_type,
+		NULL,
+	},
+};
+
+/* -----------------------------------------------------------------------------
+ * streaming/uncompressed
+ * streaming/mjpeg
+ */
+
+static const char * const uvcg_format_names[] = {
+	"uncompressed",
+	"mjpeg",
+};
+
+static ssize_t uvcg_format_bma_controls_show(struct uvcg_format *f, char *page)
+{
+	struct f_uvc_opts *opts;
+	struct config_item *opts_item;
+	struct mutex *su_mutex = &f->group.cg_subsys->su_mutex;
+	int result, i;
+	char *pg = page;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	opts_item = f->group.cg_item.ci_parent->ci_parent->ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+
+	mutex_lock(&opts->lock);
+	result = sprintf(pg, "0x");
+	pg += result;
+	for (i = 0; i < UVCG_STREAMING_CONTROL_SIZE; ++i) {
+		result += sprintf(pg, "%x\n", f->bmaControls[i]);
+		pg = page + result;
+	}
+	mutex_unlock(&opts->lock);
+
+	mutex_unlock(su_mutex);
+	return result;
+}
+
+static ssize_t uvcg_format_bma_controls_store(struct uvcg_format *ch,
+					      const char *page, size_t len)
+{
+	struct f_uvc_opts *opts;
+	struct config_item *opts_item;
+	struct mutex *su_mutex = &ch->group.cg_subsys->su_mutex;
+	int ret = -EINVAL;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	opts_item = ch->group.cg_item.ci_parent->ci_parent->ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+
+	mutex_lock(&opts->lock);
+	if (ch->linked || opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	if (len < 4 || *page != '0' ||
+	    (*(page + 1) != 'x' && *(page + 1) != 'X'))
+		goto end;
+	ret = hex2bin(ch->bmaControls, page + 2, 1);
+	if (ret < 0)
+		goto end;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	mutex_unlock(su_mutex);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * streaming/header/<NAME>
+ * streaming/header
+ */
+
+static void uvcg_format_set_indices(struct config_group *fmt);
+
+static int uvcg_streaming_header_allow_link(struct config_item *src,
+					    struct config_item *target)
+{
+	struct mutex *su_mutex = &src->ci_group->cg_subsys->su_mutex;
+	struct config_item *opts_item;
+	struct f_uvc_opts *opts;
+	struct uvcg_streaming_header *src_hdr;
+	struct uvcg_format *target_fmt = NULL;
+	struct uvcg_format_ptr *format_ptr;
+	int i, ret = -EINVAL;
+
+	src_hdr = to_uvcg_streaming_header(src);
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	opts_item = src->ci_parent->ci_parent->ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+
+	mutex_lock(&opts->lock);
+
+	if (src_hdr->linked) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	/*
+	 * Linking is only allowed to direct children of the format nodes
+	 * (streaming/uncompressed or streaming/mjpeg nodes). First check that
+	 * the grand-parent of the target matches the grand-parent of the source
+	 * (the streaming node), and then verify that the target parent is a
+	 * format node.
+	 */
+	if (src->ci_parent->ci_parent != target->ci_parent->ci_parent)
+		goto out;
+
+	for (i = 0; i < ARRAY_SIZE(uvcg_format_names); ++i) {
+		if (!strcmp(target->ci_parent->ci_name, uvcg_format_names[i]))
+			break;
+	}
+
+	if (i == ARRAY_SIZE(uvcg_format_names))
+		goto out;
+
+	target_fmt = container_of(to_config_group(target), struct uvcg_format,
+				  group);
+
+	uvcg_format_set_indices(to_config_group(target));
+
+	format_ptr = kzalloc(sizeof(*format_ptr), GFP_KERNEL);
+	if (!format_ptr) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	ret = 0;
+	format_ptr->fmt = target_fmt;
+	list_add_tail(&format_ptr->entry, &src_hdr->formats);
+	++src_hdr->num_fmt;
+	++target_fmt->linked;
+
+out:
+	mutex_unlock(&opts->lock);
+	mutex_unlock(su_mutex);
+	return ret;
+}
+
+static void uvcg_streaming_header_drop_link(struct config_item *src,
+					   struct config_item *target)
+{
+	struct mutex *su_mutex = &src->ci_group->cg_subsys->su_mutex;
+	struct config_item *opts_item;
+	struct f_uvc_opts *opts;
+	struct uvcg_streaming_header *src_hdr;
+	struct uvcg_format *target_fmt = NULL;
+	struct uvcg_format_ptr *format_ptr, *tmp;
+
+	src_hdr = to_uvcg_streaming_header(src);
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	opts_item = src->ci_parent->ci_parent->ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+
+	mutex_lock(&opts->lock);
+	target_fmt = container_of(to_config_group(target), struct uvcg_format,
+				  group);
+
+	list_for_each_entry_safe(format_ptr, tmp, &src_hdr->formats, entry)
+		if (format_ptr->fmt == target_fmt) {
+			list_del(&format_ptr->entry);
+			kfree(format_ptr);
+			--src_hdr->num_fmt;
+			break;
+		}
+
+	--target_fmt->linked;
+
+	mutex_unlock(&opts->lock);
+	mutex_unlock(su_mutex);
+}
+
+static struct configfs_item_operations uvcg_streaming_header_item_ops = {
+	.release	= uvcg_config_item_release,
+	.allow_link	= uvcg_streaming_header_allow_link,
+	.drop_link	= uvcg_streaming_header_drop_link,
+};
+
+#define UVCG_STREAMING_HEADER_ATTR(cname, aname, bits)			\
+static ssize_t uvcg_streaming_header_##cname##_show(			\
+	struct config_item *item, char *page)				\
+{									\
+	struct uvcg_streaming_header *sh = to_uvcg_streaming_header(item); \
+	struct f_uvc_opts *opts;					\
+	struct config_item *opts_item;					\
+	struct mutex *su_mutex = &sh->item.ci_group->cg_subsys->su_mutex;\
+	int result;							\
+									\
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */	\
+									\
+	opts_item = sh->item.ci_parent->ci_parent->ci_parent;		\
+	opts = to_f_uvc_opts(opts_item);				\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%u\n", le##bits##_to_cpu(sh->desc.aname));\
+	mutex_unlock(&opts->lock);					\
+									\
+	mutex_unlock(su_mutex);						\
+	return result;							\
+}									\
+									\
+UVC_ATTR_RO(uvcg_streaming_header_, cname, aname)
+
+UVCG_STREAMING_HEADER_ATTR(bm_info, bmInfo, 8);
+UVCG_STREAMING_HEADER_ATTR(b_terminal_link, bTerminalLink, 8);
+UVCG_STREAMING_HEADER_ATTR(b_still_capture_method, bStillCaptureMethod, 8);
+UVCG_STREAMING_HEADER_ATTR(b_trigger_support, bTriggerSupport, 8);
+UVCG_STREAMING_HEADER_ATTR(b_trigger_usage, bTriggerUsage, 8);
+
+#undef UVCG_STREAMING_HEADER_ATTR
+
+static struct configfs_attribute *uvcg_streaming_header_attrs[] = {
+	&uvcg_streaming_header_attr_bm_info,
+	&uvcg_streaming_header_attr_b_terminal_link,
+	&uvcg_streaming_header_attr_b_still_capture_method,
+	&uvcg_streaming_header_attr_b_trigger_support,
+	&uvcg_streaming_header_attr_b_trigger_usage,
+	NULL,
+};
+
+static const struct config_item_type uvcg_streaming_header_type = {
+	.ct_item_ops	= &uvcg_streaming_header_item_ops,
+	.ct_attrs	= uvcg_streaming_header_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_item
+*uvcg_streaming_header_make(struct config_group *group, const char *name)
+{
+	struct uvcg_streaming_header *h;
+
+	h = kzalloc(sizeof(*h), GFP_KERNEL);
+	if (!h)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_LIST_HEAD(&h->formats);
+	h->desc.bDescriptorType		= USB_DT_CS_INTERFACE;
+	h->desc.bDescriptorSubType	= UVC_VS_INPUT_HEADER;
+	h->desc.bTerminalLink		= 3;
+	h->desc.bControlSize		= UVCG_STREAMING_CONTROL_SIZE;
+
+	config_item_init_type_name(&h->item, name, &uvcg_streaming_header_type);
+
+	return &h->item;
+}
+
+static struct configfs_group_operations uvcg_streaming_header_grp_ops = {
+	.make_item		= uvcg_streaming_header_make,
+};
+
+static const struct uvcg_config_group_type uvcg_streaming_header_grp_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_group_ops	= &uvcg_streaming_header_grp_ops,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "header",
+};
+
+/* -----------------------------------------------------------------------------
+ * streaming/<mode>/<format>/<NAME>
+ */
+
+#define UVCG_FRAME_ATTR(cname, aname, bits) \
+static ssize_t uvcg_frame_##cname##_show(struct config_item *item, char *page)\
+{									\
+	struct uvcg_frame *f = to_uvcg_frame(item);			\
+	struct f_uvc_opts *opts;					\
+	struct config_item *opts_item;					\
+	struct mutex *su_mutex = &f->item.ci_group->cg_subsys->su_mutex;\
+	int result;							\
+									\
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */	\
+									\
+	opts_item = f->item.ci_parent->ci_parent->ci_parent->ci_parent;	\
+	opts = to_f_uvc_opts(opts_item);				\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%u\n", f->frame.cname);			\
+	mutex_unlock(&opts->lock);					\
+									\
+	mutex_unlock(su_mutex);						\
+	return result;							\
+}									\
+									\
+static ssize_t  uvcg_frame_##cname##_store(struct config_item *item,	\
+					   const char *page, size_t len)\
+{									\
+	struct uvcg_frame *f = to_uvcg_frame(item);			\
+	struct f_uvc_opts *opts;					\
+	struct config_item *opts_item;					\
+	struct uvcg_format *fmt;					\
+	struct mutex *su_mutex = &f->item.ci_group->cg_subsys->su_mutex;\
+	typeof(f->frame.cname) num;					\
+	int ret;							\
+									\
+	ret = kstrtou##bits(page, 0, &num);				\
+	if (ret)							\
+		return ret;						\
+									\
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */	\
+									\
+	opts_item = f->item.ci_parent->ci_parent->ci_parent->ci_parent;	\
+	opts = to_f_uvc_opts(opts_item);				\
+	fmt = to_uvcg_format(f->item.ci_parent);			\
+									\
+	mutex_lock(&opts->lock);					\
+	if (fmt->linked || opts->refcnt) {				\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	f->frame.cname = num;						\
+	ret = len;							\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	mutex_unlock(su_mutex);						\
+	return ret;							\
+}									\
+									\
+UVC_ATTR(uvcg_frame_, cname, aname);
+
+static ssize_t uvcg_frame_b_frame_index_show(struct config_item *item,
+					     char *page)
+{
+	struct uvcg_frame *f = to_uvcg_frame(item);
+	struct uvcg_format *fmt;
+	struct f_uvc_opts *opts;
+	struct config_item *opts_item;
+	struct config_item *fmt_item;
+	struct mutex *su_mutex = &f->item.ci_group->cg_subsys->su_mutex;
+	int result;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	fmt_item = f->item.ci_parent;
+	fmt = to_uvcg_format(fmt_item);
+
+	if (!fmt->linked) {
+		result = -EBUSY;
+		goto out;
+	}
+
+	opts_item = fmt_item->ci_parent->ci_parent->ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%u\n", f->frame.b_frame_index);
+	mutex_unlock(&opts->lock);
+
+out:
+	mutex_unlock(su_mutex);
+	return result;
+}
+
+UVC_ATTR_RO(uvcg_frame_, b_frame_index, bFrameIndex);
+
+UVCG_FRAME_ATTR(bm_capabilities, bmCapabilities, 8);
+UVCG_FRAME_ATTR(w_width, wWidth, 16);
+UVCG_FRAME_ATTR(w_height, wHeight, 16);
+UVCG_FRAME_ATTR(dw_min_bit_rate, dwMinBitRate, 32);
+UVCG_FRAME_ATTR(dw_max_bit_rate, dwMaxBitRate, 32);
+UVCG_FRAME_ATTR(dw_max_video_frame_buffer_size, dwMaxVideoFrameBufferSize, 32);
+UVCG_FRAME_ATTR(dw_default_frame_interval, dwDefaultFrameInterval, 32);
+
+#undef UVCG_FRAME_ATTR
+
+static ssize_t uvcg_frame_dw_frame_interval_show(struct config_item *item,
+						 char *page)
+{
+	struct uvcg_frame *frm = to_uvcg_frame(item);
+	struct f_uvc_opts *opts;
+	struct config_item *opts_item;
+	struct mutex *su_mutex = &frm->item.ci_group->cg_subsys->su_mutex;
+	int result, i;
+	char *pg = page;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	opts_item = frm->item.ci_parent->ci_parent->ci_parent->ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+
+	mutex_lock(&opts->lock);
+	for (result = 0, i = 0; i < frm->frame.b_frame_interval_type; ++i) {
+		result += sprintf(pg, "%u\n", frm->dw_frame_interval[i]);
+		pg = page + result;
+	}
+	mutex_unlock(&opts->lock);
+
+	mutex_unlock(su_mutex);
+	return result;
+}
+
+static inline int __uvcg_count_frm_intrv(char *buf, void *priv)
+{
+	++*((int *)priv);
+	return 0;
+}
+
+static inline int __uvcg_fill_frm_intrv(char *buf, void *priv)
+{
+	u32 num, **interv;
+	int ret;
+
+	ret = kstrtou32(buf, 0, &num);
+	if (ret)
+		return ret;
+
+	interv = priv;
+	**interv = num;
+	++*interv;
+
+	return 0;
+}
+
+static int __uvcg_iter_frm_intrv(const char *page, size_t len,
+				 int (*fun)(char *, void *), void *priv)
+{
+	/* sign, base 2 representation, newline, terminator */
+	char buf[1 + sizeof(u32) * 8 + 1 + 1];
+	const char *pg = page;
+	int i, ret;
+
+	if (!fun)
+		return -EINVAL;
+
+	while (pg - page < len) {
+		i = 0;
+		while (i < sizeof(buf) && (pg - page < len) &&
+				*pg != '\0' && *pg != '\n')
+			buf[i++] = *pg++;
+		if (i == sizeof(buf))
+			return -EINVAL;
+		while ((pg - page < len) && (*pg == '\0' || *pg == '\n'))
+			++pg;
+		buf[i] = '\0';
+		ret = fun(buf, priv);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static ssize_t uvcg_frame_dw_frame_interval_store(struct config_item *item,
+						  const char *page, size_t len)
+{
+	struct uvcg_frame *ch = to_uvcg_frame(item);
+	struct f_uvc_opts *opts;
+	struct config_item *opts_item;
+	struct uvcg_format *fmt;
+	struct mutex *su_mutex = &ch->item.ci_group->cg_subsys->su_mutex;
+	int ret = 0, n = 0;
+	u32 *frm_intrv, *tmp;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	opts_item = ch->item.ci_parent->ci_parent->ci_parent->ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+	fmt = to_uvcg_format(ch->item.ci_parent);
+
+	mutex_lock(&opts->lock);
+	if (fmt->linked || opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = __uvcg_iter_frm_intrv(page, len, __uvcg_count_frm_intrv, &n);
+	if (ret)
+		goto end;
+
+	tmp = frm_intrv = kcalloc(n, sizeof(u32), GFP_KERNEL);
+	if (!frm_intrv) {
+		ret = -ENOMEM;
+		goto end;
+	}
+
+	ret = __uvcg_iter_frm_intrv(page, len, __uvcg_fill_frm_intrv, &tmp);
+	if (ret) {
+		kfree(frm_intrv);
+		goto end;
+	}
+
+	kfree(ch->dw_frame_interval);
+	ch->dw_frame_interval = frm_intrv;
+	ch->frame.b_frame_interval_type = n;
+	sort(ch->dw_frame_interval, n, sizeof(*ch->dw_frame_interval),
+	     uvcg_config_compare_u32, NULL);
+	ret = len;
+
+end:
+	mutex_unlock(&opts->lock);
+	mutex_unlock(su_mutex);
+	return ret;
+}
+
+UVC_ATTR(uvcg_frame_, dw_frame_interval, dwFrameInterval);
+
+static struct configfs_attribute *uvcg_frame_attrs[] = {
+	&uvcg_frame_attr_b_frame_index,
+	&uvcg_frame_attr_bm_capabilities,
+	&uvcg_frame_attr_w_width,
+	&uvcg_frame_attr_w_height,
+	&uvcg_frame_attr_dw_min_bit_rate,
+	&uvcg_frame_attr_dw_max_bit_rate,
+	&uvcg_frame_attr_dw_max_video_frame_buffer_size,
+	&uvcg_frame_attr_dw_default_frame_interval,
+	&uvcg_frame_attr_dw_frame_interval,
+	NULL,
+};
+
+static const struct config_item_type uvcg_frame_type = {
+	.ct_item_ops	= &uvcg_config_item_ops,
+	.ct_attrs	= uvcg_frame_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_item *uvcg_frame_make(struct config_group *group,
+					   const char *name)
+{
+	struct uvcg_frame *h;
+	struct uvcg_format *fmt;
+	struct f_uvc_opts *opts;
+	struct config_item *opts_item;
+	struct uvcg_frame_ptr *frame_ptr;
+
+	h = kzalloc(sizeof(*h), GFP_KERNEL);
+	if (!h)
+		return ERR_PTR(-ENOMEM);
+
+	h->frame.b_descriptor_type		= USB_DT_CS_INTERFACE;
+	h->frame.b_frame_index			= 1;
+	h->frame.w_width			= 640;
+	h->frame.w_height			= 360;
+	h->frame.dw_min_bit_rate		= 18432000;
+	h->frame.dw_max_bit_rate		= 55296000;
+	h->frame.dw_max_video_frame_buffer_size	= 460800;
+	h->frame.dw_default_frame_interval	= 666666;
+
+	opts_item = group->cg_item.ci_parent->ci_parent->ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+
+	mutex_lock(&opts->lock);
+	fmt = to_uvcg_format(&group->cg_item);
+	if (fmt->type == UVCG_UNCOMPRESSED) {
+		h->frame.b_descriptor_subtype = UVC_VS_FRAME_UNCOMPRESSED;
+		h->fmt_type = UVCG_UNCOMPRESSED;
+	} else if (fmt->type == UVCG_MJPEG) {
+		h->frame.b_descriptor_subtype = UVC_VS_FRAME_MJPEG;
+		h->fmt_type = UVCG_MJPEG;
+	} else {
+		mutex_unlock(&opts->lock);
+		kfree(h);
+		return ERR_PTR(-EINVAL);
+	}
+
+	frame_ptr = kzalloc(sizeof(*frame_ptr), GFP_KERNEL);
+	if (!frame_ptr) {
+		mutex_unlock(&opts->lock);
+		kfree(h);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	frame_ptr->frm = h;
+	list_add_tail(&frame_ptr->entry, &fmt->frames);
+	++fmt->num_frames;
+	mutex_unlock(&opts->lock);
+
+	config_item_init_type_name(&h->item, name, &uvcg_frame_type);
+
+	return &h->item;
+}
+
+static void uvcg_frame_drop(struct config_group *group, struct config_item *item)
+{
+	struct uvcg_format *fmt;
+	struct f_uvc_opts *opts;
+	struct config_item *opts_item;
+	struct uvcg_frame *target_frm = NULL;
+	struct uvcg_frame_ptr *frame_ptr, *tmp;
+
+	opts_item = group->cg_item.ci_parent->ci_parent->ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+
+	mutex_lock(&opts->lock);
+	target_frm = container_of(item, struct uvcg_frame, item);
+	fmt = to_uvcg_format(&group->cg_item);
+
+	list_for_each_entry_safe(frame_ptr, tmp, &fmt->frames, entry)
+		if (frame_ptr->frm == target_frm) {
+			list_del(&frame_ptr->entry);
+			kfree(frame_ptr);
+			--fmt->num_frames;
+			break;
+		}
+	mutex_unlock(&opts->lock);
+
+	config_item_put(item);
+}
+
+static void uvcg_format_set_indices(struct config_group *fmt)
+{
+	struct config_item *ci;
+	unsigned int i = 1;
+
+	list_for_each_entry(ci, &fmt->cg_children, ci_entry) {
+		struct uvcg_frame *frm;
+
+		if (ci->ci_type != &uvcg_frame_type)
+			continue;
+
+		frm = to_uvcg_frame(ci);
+		frm->frame.b_frame_index = i++;
+	}
+}
+
+/* -----------------------------------------------------------------------------
+ * streaming/uncompressed/<NAME>
+ */
+
+static struct configfs_group_operations uvcg_uncompressed_group_ops = {
+	.make_item		= uvcg_frame_make,
+	.drop_item		= uvcg_frame_drop,
+};
+
+static ssize_t uvcg_uncompressed_guid_format_show(struct config_item *item,
+							char *page)
+{
+	struct uvcg_uncompressed *ch = to_uvcg_uncompressed(item);
+	struct f_uvc_opts *opts;
+	struct config_item *opts_item;
+	struct mutex *su_mutex = &ch->fmt.group.cg_subsys->su_mutex;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	opts_item = ch->fmt.group.cg_item.ci_parent->ci_parent->ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+
+	mutex_lock(&opts->lock);
+	memcpy(page, ch->desc.guidFormat, sizeof(ch->desc.guidFormat));
+	mutex_unlock(&opts->lock);
+
+	mutex_unlock(su_mutex);
+
+	return sizeof(ch->desc.guidFormat);
+}
+
+static ssize_t uvcg_uncompressed_guid_format_store(struct config_item *item,
+						   const char *page, size_t len)
+{
+	struct uvcg_uncompressed *ch = to_uvcg_uncompressed(item);
+	struct f_uvc_opts *opts;
+	struct config_item *opts_item;
+	struct mutex *su_mutex = &ch->fmt.group.cg_subsys->su_mutex;
+	int ret;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	opts_item = ch->fmt.group.cg_item.ci_parent->ci_parent->ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+
+	mutex_lock(&opts->lock);
+	if (ch->fmt.linked || opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	memcpy(ch->desc.guidFormat, page,
+	       min(sizeof(ch->desc.guidFormat), len));
+	ret = sizeof(ch->desc.guidFormat);
+
+end:
+	mutex_unlock(&opts->lock);
+	mutex_unlock(su_mutex);
+	return ret;
+}
+
+UVC_ATTR(uvcg_uncompressed_, guid_format, guidFormat);
+
+#define UVCG_UNCOMPRESSED_ATTR_RO(cname, aname, bits)			\
+static ssize_t uvcg_uncompressed_##cname##_show(			\
+	struct config_item *item, char *page)				\
+{									\
+	struct uvcg_uncompressed *u = to_uvcg_uncompressed(item);	\
+	struct f_uvc_opts *opts;					\
+	struct config_item *opts_item;					\
+	struct mutex *su_mutex = &u->fmt.group.cg_subsys->su_mutex;	\
+	int result;							\
+									\
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */	\
+									\
+	opts_item = u->fmt.group.cg_item.ci_parent->ci_parent->ci_parent;\
+	opts = to_f_uvc_opts(opts_item);				\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%u\n", le##bits##_to_cpu(u->desc.aname));\
+	mutex_unlock(&opts->lock);					\
+									\
+	mutex_unlock(su_mutex);						\
+	return result;							\
+}									\
+									\
+UVC_ATTR_RO(uvcg_uncompressed_, cname, aname);
+
+#define UVCG_UNCOMPRESSED_ATTR(cname, aname, bits)			\
+static ssize_t uvcg_uncompressed_##cname##_show(			\
+	struct config_item *item, char *page)				\
+{									\
+	struct uvcg_uncompressed *u = to_uvcg_uncompressed(item);	\
+	struct f_uvc_opts *opts;					\
+	struct config_item *opts_item;					\
+	struct mutex *su_mutex = &u->fmt.group.cg_subsys->su_mutex;	\
+	int result;							\
+									\
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */	\
+									\
+	opts_item = u->fmt.group.cg_item.ci_parent->ci_parent->ci_parent;\
+	opts = to_f_uvc_opts(opts_item);				\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%u\n", le##bits##_to_cpu(u->desc.aname));\
+	mutex_unlock(&opts->lock);					\
+									\
+	mutex_unlock(su_mutex);						\
+	return result;							\
+}									\
+									\
+static ssize_t								\
+uvcg_uncompressed_##cname##_store(struct config_item *item,		\
+				    const char *page, size_t len)	\
+{									\
+	struct uvcg_uncompressed *u = to_uvcg_uncompressed(item);	\
+	struct f_uvc_opts *opts;					\
+	struct config_item *opts_item;					\
+	struct mutex *su_mutex = &u->fmt.group.cg_subsys->su_mutex;	\
+	int ret;							\
+	u8 num;								\
+									\
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */	\
+									\
+	opts_item = u->fmt.group.cg_item.ci_parent->ci_parent->ci_parent;\
+	opts = to_f_uvc_opts(opts_item);				\
+									\
+	mutex_lock(&opts->lock);					\
+	if (u->fmt.linked || opts->refcnt) {				\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	ret = kstrtou8(page, 0, &num);					\
+	if (ret)							\
+		goto end;						\
+									\
+	/* index values in uvc are never 0 */				\
+	if (!num) {							\
+		ret = -EINVAL;						\
+		goto end;						\
+	}								\
+									\
+	u->desc.aname = num;						\
+	ret = len;							\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	mutex_unlock(su_mutex);						\
+	return ret;							\
+}									\
+									\
+UVC_ATTR(uvcg_uncompressed_, cname, aname);
+
+UVCG_UNCOMPRESSED_ATTR_RO(b_format_index, bFormatIndex, 8);
+UVCG_UNCOMPRESSED_ATTR(b_bits_per_pixel, bBitsPerPixel, 8);
+UVCG_UNCOMPRESSED_ATTR(b_default_frame_index, bDefaultFrameIndex, 8);
+UVCG_UNCOMPRESSED_ATTR_RO(b_aspect_ratio_x, bAspectRatioX, 8);
+UVCG_UNCOMPRESSED_ATTR_RO(b_aspect_ratio_y, bAspectRatioY, 8);
+UVCG_UNCOMPRESSED_ATTR_RO(bm_interface_flags, bmInterfaceFlags, 8);
+
+#undef UVCG_UNCOMPRESSED_ATTR
+#undef UVCG_UNCOMPRESSED_ATTR_RO
+
+static inline ssize_t
+uvcg_uncompressed_bma_controls_show(struct config_item *item, char *page)
+{
+	struct uvcg_uncompressed *unc = to_uvcg_uncompressed(item);
+	return uvcg_format_bma_controls_show(&unc->fmt, page);
+}
+
+static inline ssize_t
+uvcg_uncompressed_bma_controls_store(struct config_item *item,
+				     const char *page, size_t len)
+{
+	struct uvcg_uncompressed *unc = to_uvcg_uncompressed(item);
+	return uvcg_format_bma_controls_store(&unc->fmt, page, len);
+}
+
+UVC_ATTR(uvcg_uncompressed_, bma_controls, bmaControls);
+
+static struct configfs_attribute *uvcg_uncompressed_attrs[] = {
+	&uvcg_uncompressed_attr_b_format_index,
+	&uvcg_uncompressed_attr_guid_format,
+	&uvcg_uncompressed_attr_b_bits_per_pixel,
+	&uvcg_uncompressed_attr_b_default_frame_index,
+	&uvcg_uncompressed_attr_b_aspect_ratio_x,
+	&uvcg_uncompressed_attr_b_aspect_ratio_y,
+	&uvcg_uncompressed_attr_bm_interface_flags,
+	&uvcg_uncompressed_attr_bma_controls,
+	NULL,
+};
+
+static const struct config_item_type uvcg_uncompressed_type = {
+	.ct_item_ops	= &uvcg_config_item_ops,
+	.ct_group_ops	= &uvcg_uncompressed_group_ops,
+	.ct_attrs	= uvcg_uncompressed_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_group *uvcg_uncompressed_make(struct config_group *group,
+						   const char *name)
+{
+	static char guid[] = {
+		'Y',  'U',  'Y',  '2', 0x00, 0x00, 0x10, 0x00,
+		 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71
+	};
+	struct uvcg_uncompressed *h;
+
+	h = kzalloc(sizeof(*h), GFP_KERNEL);
+	if (!h)
+		return ERR_PTR(-ENOMEM);
+
+	h->desc.bLength			= UVC_DT_FORMAT_UNCOMPRESSED_SIZE;
+	h->desc.bDescriptorType		= USB_DT_CS_INTERFACE;
+	h->desc.bDescriptorSubType	= UVC_VS_FORMAT_UNCOMPRESSED;
+	memcpy(h->desc.guidFormat, guid, sizeof(guid));
+	h->desc.bBitsPerPixel		= 16;
+	h->desc.bDefaultFrameIndex	= 1;
+	h->desc.bAspectRatioX		= 0;
+	h->desc.bAspectRatioY		= 0;
+	h->desc.bmInterfaceFlags	= 0;
+	h->desc.bCopyProtect		= 0;
+
+	INIT_LIST_HEAD(&h->fmt.frames);
+	h->fmt.type = UVCG_UNCOMPRESSED;
+	config_group_init_type_name(&h->fmt.group, name,
+				    &uvcg_uncompressed_type);
+
+	return &h->fmt.group;
+}
+
+static struct configfs_group_operations uvcg_uncompressed_grp_ops = {
+	.make_group		= uvcg_uncompressed_make,
+};
+
+static const struct uvcg_config_group_type uvcg_uncompressed_grp_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_group_ops	= &uvcg_uncompressed_grp_ops,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "uncompressed",
+};
+
+/* -----------------------------------------------------------------------------
+ * streaming/mjpeg/<NAME>
+ */
+
+static struct configfs_group_operations uvcg_mjpeg_group_ops = {
+	.make_item		= uvcg_frame_make,
+	.drop_item		= uvcg_frame_drop,
+};
+
+#define UVCG_MJPEG_ATTR_RO(cname, aname, bits)				\
+static ssize_t uvcg_mjpeg_##cname##_show(struct config_item *item, char *page)\
+{									\
+	struct uvcg_mjpeg *u = to_uvcg_mjpeg(item);			\
+	struct f_uvc_opts *opts;					\
+	struct config_item *opts_item;					\
+	struct mutex *su_mutex = &u->fmt.group.cg_subsys->su_mutex;	\
+	int result;							\
+									\
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */	\
+									\
+	opts_item = u->fmt.group.cg_item.ci_parent->ci_parent->ci_parent;\
+	opts = to_f_uvc_opts(opts_item);				\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%u\n", le##bits##_to_cpu(u->desc.aname));\
+	mutex_unlock(&opts->lock);					\
+									\
+	mutex_unlock(su_mutex);						\
+	return result;							\
+}									\
+									\
+UVC_ATTR_RO(uvcg_mjpeg_, cname, aname)
+
+#define UVCG_MJPEG_ATTR(cname, aname, bits)				\
+static ssize_t uvcg_mjpeg_##cname##_show(struct config_item *item, char *page)\
+{									\
+	struct uvcg_mjpeg *u = to_uvcg_mjpeg(item);			\
+	struct f_uvc_opts *opts;					\
+	struct config_item *opts_item;					\
+	struct mutex *su_mutex = &u->fmt.group.cg_subsys->su_mutex;	\
+	int result;							\
+									\
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */	\
+									\
+	opts_item = u->fmt.group.cg_item.ci_parent->ci_parent->ci_parent;\
+	opts = to_f_uvc_opts(opts_item);				\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%u\n", le##bits##_to_cpu(u->desc.aname));\
+	mutex_unlock(&opts->lock);					\
+									\
+	mutex_unlock(su_mutex);						\
+	return result;							\
+}									\
+									\
+static ssize_t								\
+uvcg_mjpeg_##cname##_store(struct config_item *item,			\
+			   const char *page, size_t len)		\
+{									\
+	struct uvcg_mjpeg *u = to_uvcg_mjpeg(item);			\
+	struct f_uvc_opts *opts;					\
+	struct config_item *opts_item;					\
+	struct mutex *su_mutex = &u->fmt.group.cg_subsys->su_mutex;	\
+	int ret;							\
+	u8 num;								\
+									\
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */	\
+									\
+	opts_item = u->fmt.group.cg_item.ci_parent->ci_parent->ci_parent;\
+	opts = to_f_uvc_opts(opts_item);				\
+									\
+	mutex_lock(&opts->lock);					\
+	if (u->fmt.linked || opts->refcnt) {				\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	ret = kstrtou8(page, 0, &num);					\
+	if (ret)							\
+		goto end;						\
+									\
+	/* index values in uvc are never 0 */				\
+	if (!num) {							\
+		ret = -EINVAL;						\
+		goto end;						\
+	}								\
+									\
+	u->desc.aname = num;						\
+	ret = len;							\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	mutex_unlock(su_mutex);						\
+	return ret;							\
+}									\
+									\
+UVC_ATTR(uvcg_mjpeg_, cname, aname)
+
+UVCG_MJPEG_ATTR_RO(b_format_index, bFormatIndex, 8);
+UVCG_MJPEG_ATTR(b_default_frame_index, bDefaultFrameIndex, 8);
+UVCG_MJPEG_ATTR_RO(bm_flags, bmFlags, 8);
+UVCG_MJPEG_ATTR_RO(b_aspect_ratio_x, bAspectRatioX, 8);
+UVCG_MJPEG_ATTR_RO(b_aspect_ratio_y, bAspectRatioY, 8);
+UVCG_MJPEG_ATTR_RO(bm_interface_flags, bmInterfaceFlags, 8);
+
+#undef UVCG_MJPEG_ATTR
+#undef UVCG_MJPEG_ATTR_RO
+
+static inline ssize_t
+uvcg_mjpeg_bma_controls_show(struct config_item *item, char *page)
+{
+	struct uvcg_mjpeg *u = to_uvcg_mjpeg(item);
+	return uvcg_format_bma_controls_show(&u->fmt, page);
+}
+
+static inline ssize_t
+uvcg_mjpeg_bma_controls_store(struct config_item *item,
+				     const char *page, size_t len)
+{
+	struct uvcg_mjpeg *u = to_uvcg_mjpeg(item);
+	return uvcg_format_bma_controls_store(&u->fmt, page, len);
+}
+
+UVC_ATTR(uvcg_mjpeg_, bma_controls, bmaControls);
+
+static struct configfs_attribute *uvcg_mjpeg_attrs[] = {
+	&uvcg_mjpeg_attr_b_format_index,
+	&uvcg_mjpeg_attr_b_default_frame_index,
+	&uvcg_mjpeg_attr_bm_flags,
+	&uvcg_mjpeg_attr_b_aspect_ratio_x,
+	&uvcg_mjpeg_attr_b_aspect_ratio_y,
+	&uvcg_mjpeg_attr_bm_interface_flags,
+	&uvcg_mjpeg_attr_bma_controls,
+	NULL,
+};
+
+static const struct config_item_type uvcg_mjpeg_type = {
+	.ct_item_ops	= &uvcg_config_item_ops,
+	.ct_group_ops	= &uvcg_mjpeg_group_ops,
+	.ct_attrs	= uvcg_mjpeg_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_group *uvcg_mjpeg_make(struct config_group *group,
+						   const char *name)
+{
+	struct uvcg_mjpeg *h;
+
+	h = kzalloc(sizeof(*h), GFP_KERNEL);
+	if (!h)
+		return ERR_PTR(-ENOMEM);
+
+	h->desc.bLength			= UVC_DT_FORMAT_MJPEG_SIZE;
+	h->desc.bDescriptorType		= USB_DT_CS_INTERFACE;
+	h->desc.bDescriptorSubType	= UVC_VS_FORMAT_MJPEG;
+	h->desc.bDefaultFrameIndex	= 1;
+	h->desc.bAspectRatioX		= 0;
+	h->desc.bAspectRatioY		= 0;
+	h->desc.bmInterfaceFlags	= 0;
+	h->desc.bCopyProtect		= 0;
+
+	INIT_LIST_HEAD(&h->fmt.frames);
+	h->fmt.type = UVCG_MJPEG;
+	config_group_init_type_name(&h->fmt.group, name,
+				    &uvcg_mjpeg_type);
+
+	return &h->fmt.group;
+}
+
+static struct configfs_group_operations uvcg_mjpeg_grp_ops = {
+	.make_group		= uvcg_mjpeg_make,
+};
+
+static const struct uvcg_config_group_type uvcg_mjpeg_grp_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_group_ops	= &uvcg_mjpeg_grp_ops,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "mjpeg",
+};
+
+/* -----------------------------------------------------------------------------
+ * streaming/color_matching/default
+ */
+
+#define UVCG_DEFAULT_COLOR_MATCHING_ATTR(cname, aname, bits)		\
+static ssize_t uvcg_default_color_matching_##cname##_show(		\
+	struct config_item *item, char *page)				\
+{									\
+	struct config_group *group = to_config_group(item);		\
+	struct f_uvc_opts *opts;					\
+	struct config_item *opts_item;					\
+	struct mutex *su_mutex = &group->cg_subsys->su_mutex;		\
+	struct uvc_color_matching_descriptor *cd;			\
+	int result;							\
+									\
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */	\
+									\
+	opts_item = group->cg_item.ci_parent->ci_parent->ci_parent;	\
+	opts = to_f_uvc_opts(opts_item);				\
+	cd = &opts->uvc_color_matching;					\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%u\n", le##bits##_to_cpu(cd->aname));	\
+	mutex_unlock(&opts->lock);					\
+									\
+	mutex_unlock(su_mutex);						\
+	return result;							\
+}									\
+									\
+UVC_ATTR_RO(uvcg_default_color_matching_, cname, aname)
+
+UVCG_DEFAULT_COLOR_MATCHING_ATTR(b_color_primaries, bColorPrimaries, 8);
+UVCG_DEFAULT_COLOR_MATCHING_ATTR(b_transfer_characteristics,
+				 bTransferCharacteristics, 8);
+UVCG_DEFAULT_COLOR_MATCHING_ATTR(b_matrix_coefficients, bMatrixCoefficients, 8);
+
+#undef UVCG_DEFAULT_COLOR_MATCHING_ATTR
+
+static struct configfs_attribute *uvcg_default_color_matching_attrs[] = {
+	&uvcg_default_color_matching_attr_b_color_primaries,
+	&uvcg_default_color_matching_attr_b_transfer_characteristics,
+	&uvcg_default_color_matching_attr_b_matrix_coefficients,
+	NULL,
+};
+
+static const struct uvcg_config_group_type uvcg_default_color_matching_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_attrs	= uvcg_default_color_matching_attrs,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "default",
+};
+
+/* -----------------------------------------------------------------------------
+ * streaming/color_matching
+ */
+
+static const struct uvcg_config_group_type uvcg_color_matching_grp_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "color_matching",
+	.children = (const struct uvcg_config_group_type*[]) {
+		&uvcg_default_color_matching_type,
+		NULL,
+	},
+};
+
+/* -----------------------------------------------------------------------------
+ * streaming/class/{fs|hs|ss}
+ */
+
+struct uvcg_streaming_class_group {
+	struct config_group group;
+	const char *name;
+};
+
+static inline struct uvc_descriptor_header
+***__uvcg_get_stream_class_arr(struct config_item *i, struct f_uvc_opts *o)
+{
+	struct uvcg_streaming_class_group *group =
+		container_of(i, struct uvcg_streaming_class_group,
+			     group.cg_item);
+
+	if (!strcmp(group->name, "fs"))
+		return &o->uvc_fs_streaming_cls;
+
+	if (!strcmp(group->name, "hs"))
+		return &o->uvc_hs_streaming_cls;
+
+	if (!strcmp(group->name, "ss"))
+		return &o->uvc_ss_streaming_cls;
+
+	return NULL;
+}
+
+enum uvcg_strm_type {
+	UVCG_HEADER = 0,
+	UVCG_FORMAT,
+	UVCG_FRAME
+};
+
+/*
+ * Iterate over a hierarchy of streaming descriptors' config items.
+ * The items are created by the user with configfs.
+ *
+ * It "processes" the header pointed to by @priv1, then for each format
+ * that follows the header "processes" the format itself and then for
+ * each frame inside a format "processes" the frame.
+ *
+ * As a "processing" function the @fun is used.
+ *
+ * __uvcg_iter_strm_cls() is used in two context: first, to calculate
+ * the amount of memory needed for an array of streaming descriptors
+ * and second, to actually fill the array.
+ *
+ * @h: streaming header pointer
+ * @priv2: an "inout" parameter (the caller might want to see the changes to it)
+ * @priv3: an "inout" parameter (the caller might want to see the changes to it)
+ * @fun: callback function for processing each level of the hierarchy
+ */
+static int __uvcg_iter_strm_cls(struct uvcg_streaming_header *h,
+	void *priv2, void *priv3,
+	int (*fun)(void *, void *, void *, int, enum uvcg_strm_type type))
+{
+	struct uvcg_format_ptr *f;
+	struct config_group *grp;
+	struct config_item *item;
+	struct uvcg_frame *frm;
+	int ret, i, j;
+
+	if (!fun)
+		return -EINVAL;
+
+	i = j = 0;
+	ret = fun(h, priv2, priv3, 0, UVCG_HEADER);
+	if (ret)
+		return ret;
+	list_for_each_entry(f, &h->formats, entry) {
+		ret = fun(f->fmt, priv2, priv3, i++, UVCG_FORMAT);
+		if (ret)
+			return ret;
+		grp = &f->fmt->group;
+		list_for_each_entry(item, &grp->cg_children, ci_entry) {
+			frm = to_uvcg_frame(item);
+			ret = fun(frm, priv2, priv3, j++, UVCG_FRAME);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * Count how many bytes are needed for an array of streaming descriptors.
+ *
+ * @priv1: pointer to a header, format or frame
+ * @priv2: inout parameter, accumulated size of the array
+ * @priv3: inout parameter, accumulated number of the array elements
+ * @n: unused, this function's prototype must match @fun in __uvcg_iter_strm_cls
+ */
+static int __uvcg_cnt_strm(void *priv1, void *priv2, void *priv3, int n,
+			   enum uvcg_strm_type type)
+{
+	size_t *size = priv2;
+	size_t *count = priv3;
+
+	switch (type) {
+	case UVCG_HEADER: {
+		struct uvcg_streaming_header *h = priv1;
+
+		*size += sizeof(h->desc);
+		/* bmaControls */
+		*size += h->num_fmt * UVCG_STREAMING_CONTROL_SIZE;
+	}
+	break;
+	case UVCG_FORMAT: {
+		struct uvcg_format *fmt = priv1;
+
+		if (fmt->type == UVCG_UNCOMPRESSED) {
+			struct uvcg_uncompressed *u =
+				container_of(fmt, struct uvcg_uncompressed,
+					     fmt);
+
+			*size += sizeof(u->desc);
+		} else if (fmt->type == UVCG_MJPEG) {
+			struct uvcg_mjpeg *m =
+				container_of(fmt, struct uvcg_mjpeg, fmt);
+
+			*size += sizeof(m->desc);
+		} else {
+			return -EINVAL;
+		}
+	}
+	break;
+	case UVCG_FRAME: {
+		struct uvcg_frame *frm = priv1;
+		int sz = sizeof(frm->dw_frame_interval);
+
+		*size += sizeof(frm->frame);
+		*size += frm->frame.b_frame_interval_type * sz;
+	}
+	break;
+	}
+
+	++*count;
+
+	return 0;
+}
+
+/*
+ * Fill an array of streaming descriptors.
+ *
+ * @priv1: pointer to a header, format or frame
+ * @priv2: inout parameter, pointer into a block of memory
+ * @priv3: inout parameter, pointer to a 2-dimensional array
+ */
+static int __uvcg_fill_strm(void *priv1, void *priv2, void *priv3, int n,
+			    enum uvcg_strm_type type)
+{
+	void **dest = priv2;
+	struct uvc_descriptor_header ***array = priv3;
+	size_t sz;
+
+	**array = *dest;
+	++*array;
+
+	switch (type) {
+	case UVCG_HEADER: {
+		struct uvc_input_header_descriptor *ihdr = *dest;
+		struct uvcg_streaming_header *h = priv1;
+		struct uvcg_format_ptr *f;
+
+		memcpy(*dest, &h->desc, sizeof(h->desc));
+		*dest += sizeof(h->desc);
+		sz = UVCG_STREAMING_CONTROL_SIZE;
+		list_for_each_entry(f, &h->formats, entry) {
+			memcpy(*dest, f->fmt->bmaControls, sz);
+			*dest += sz;
+		}
+		ihdr->bLength = sizeof(h->desc) + h->num_fmt * sz;
+		ihdr->bNumFormats = h->num_fmt;
+	}
+	break;
+	case UVCG_FORMAT: {
+		struct uvcg_format *fmt = priv1;
+
+		if (fmt->type == UVCG_UNCOMPRESSED) {
+			struct uvcg_uncompressed *u =
+				container_of(fmt, struct uvcg_uncompressed,
+					     fmt);
+
+			u->desc.bFormatIndex = n + 1;
+			u->desc.bNumFrameDescriptors = fmt->num_frames;
+			memcpy(*dest, &u->desc, sizeof(u->desc));
+			*dest += sizeof(u->desc);
+		} else if (fmt->type == UVCG_MJPEG) {
+			struct uvcg_mjpeg *m =
+				container_of(fmt, struct uvcg_mjpeg, fmt);
+
+			m->desc.bFormatIndex = n + 1;
+			m->desc.bNumFrameDescriptors = fmt->num_frames;
+			memcpy(*dest, &m->desc, sizeof(m->desc));
+			*dest += sizeof(m->desc);
+		} else {
+			return -EINVAL;
+		}
+	}
+	break;
+	case UVCG_FRAME: {
+		struct uvcg_frame *frm = priv1;
+		struct uvc_descriptor_header *h = *dest;
+
+		sz = sizeof(frm->frame);
+		memcpy(*dest, &frm->frame, sz);
+		*dest += sz;
+		sz = frm->frame.b_frame_interval_type *
+			sizeof(*frm->dw_frame_interval);
+		memcpy(*dest, frm->dw_frame_interval, sz);
+		*dest += sz;
+		if (frm->fmt_type == UVCG_UNCOMPRESSED)
+			h->bLength = UVC_DT_FRAME_UNCOMPRESSED_SIZE(
+				frm->frame.b_frame_interval_type);
+		else if (frm->fmt_type == UVCG_MJPEG)
+			h->bLength = UVC_DT_FRAME_MJPEG_SIZE(
+				frm->frame.b_frame_interval_type);
+	}
+	break;
+	}
+
+	return 0;
+}
+
+static int uvcg_streaming_class_allow_link(struct config_item *src,
+					   struct config_item *target)
+{
+	struct config_item *streaming, *header;
+	struct f_uvc_opts *opts;
+	struct mutex *su_mutex = &src->ci_group->cg_subsys->su_mutex;
+	struct uvc_descriptor_header ***class_array, **cl_arr;
+	struct uvcg_streaming_header *target_hdr;
+	void *data, *data_save;
+	size_t size = 0, count = 0;
+	int ret = -EINVAL;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	streaming = src->ci_parent->ci_parent;
+	header = config_group_find_item(to_config_group(streaming), "header");
+	if (!header || target->ci_parent != header)
+		goto out;
+
+	opts = to_f_uvc_opts(streaming->ci_parent);
+
+	mutex_lock(&opts->lock);
+
+	class_array = __uvcg_get_stream_class_arr(src, opts);
+	if (!class_array || *class_array || opts->refcnt) {
+		ret = -EBUSY;
+		goto unlock;
+	}
+
+	target_hdr = to_uvcg_streaming_header(target);
+	ret = __uvcg_iter_strm_cls(target_hdr, &size, &count, __uvcg_cnt_strm);
+	if (ret)
+		goto unlock;
+
+	count += 2; /* color_matching, NULL */
+	*class_array = kcalloc(count, sizeof(void *), GFP_KERNEL);
+	if (!*class_array) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+
+	data = data_save = kzalloc(size, GFP_KERNEL);
+	if (!data) {
+		kfree(*class_array);
+		*class_array = NULL;
+		ret = -ENOMEM;
+		goto unlock;
+	}
+	cl_arr = *class_array;
+	ret = __uvcg_iter_strm_cls(target_hdr, &data, &cl_arr,
+				   __uvcg_fill_strm);
+	if (ret) {
+		kfree(*class_array);
+		*class_array = NULL;
+		/*
+		 * __uvcg_fill_strm() called from __uvcg_iter_stream_cls()
+		 * might have advanced the "data", so use a backup copy
+		 */
+		kfree(data_save);
+		goto unlock;
+	}
+	*cl_arr = (struct uvc_descriptor_header *)&opts->uvc_color_matching;
+
+	++target_hdr->linked;
+	ret = 0;
+
+unlock:
+	mutex_unlock(&opts->lock);
+out:
+	config_item_put(header);
+	mutex_unlock(su_mutex);
+	return ret;
+}
+
+static void uvcg_streaming_class_drop_link(struct config_item *src,
+					  struct config_item *target)
+{
+	struct config_item *streaming, *header;
+	struct f_uvc_opts *opts;
+	struct mutex *su_mutex = &src->ci_group->cg_subsys->su_mutex;
+	struct uvc_descriptor_header ***class_array;
+	struct uvcg_streaming_header *target_hdr;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	streaming = src->ci_parent->ci_parent;
+	header = config_group_find_item(to_config_group(streaming), "header");
+	if (!header || target->ci_parent != header)
+		goto out;
+
+	opts = to_f_uvc_opts(streaming->ci_parent);
+
+	mutex_lock(&opts->lock);
+
+	class_array = __uvcg_get_stream_class_arr(src, opts);
+	if (!class_array || !*class_array)
+		goto unlock;
+
+	if (opts->refcnt)
+		goto unlock;
+
+	target_hdr = to_uvcg_streaming_header(target);
+	--target_hdr->linked;
+	kfree(**class_array);
+	kfree(*class_array);
+	*class_array = NULL;
+
+unlock:
+	mutex_unlock(&opts->lock);
+out:
+	config_item_put(header);
+	mutex_unlock(su_mutex);
+}
+
+static struct configfs_item_operations uvcg_streaming_class_item_ops = {
+	.release	= uvcg_config_item_release,
+	.allow_link	= uvcg_streaming_class_allow_link,
+	.drop_link	= uvcg_streaming_class_drop_link,
+};
+
+static const struct config_item_type uvcg_streaming_class_type = {
+	.ct_item_ops	= &uvcg_streaming_class_item_ops,
+	.ct_owner	= THIS_MODULE,
+};
+
+/* -----------------------------------------------------------------------------
+ * streaming/class
+ */
+
+static int uvcg_streaming_class_create_children(struct config_group *parent)
+{
+	static const char * const names[] = { "fs", "hs", "ss" };
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(names); ++i) {
+		struct uvcg_streaming_class_group *group;
+
+		group = kzalloc(sizeof(*group), GFP_KERNEL);
+		if (!group)
+			return -ENOMEM;
+
+		group->name = names[i];
+
+		config_group_init_type_name(&group->group, group->name,
+					    &uvcg_streaming_class_type);
+		configfs_add_default_group(&group->group, parent);
+	}
+
+	return 0;
+}
+
+static const struct uvcg_config_group_type uvcg_streaming_class_grp_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "class",
+	.create_children = uvcg_streaming_class_create_children,
+};
+
+/* -----------------------------------------------------------------------------
+ * streaming
+ */
+
+static ssize_t uvcg_default_streaming_b_interface_number_show(
+	struct config_item *item, char *page)
+{
+	struct config_group *group = to_config_group(item);
+	struct mutex *su_mutex = &group->cg_subsys->su_mutex;
+	struct config_item *opts_item;
+	struct f_uvc_opts *opts;
+	int result = 0;
+
+	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
+
+	opts_item = item->ci_parent;
+	opts = to_f_uvc_opts(opts_item);
+
+	mutex_lock(&opts->lock);
+	result += sprintf(page, "%u\n", opts->streaming_interface);
+	mutex_unlock(&opts->lock);
+
+	mutex_unlock(su_mutex);
+
+	return result;
+}
+
+UVC_ATTR_RO(uvcg_default_streaming_, b_interface_number, bInterfaceNumber);
+
+static struct configfs_attribute *uvcg_default_streaming_attrs[] = {
+	&uvcg_default_streaming_attr_b_interface_number,
+	NULL,
+};
+
+static const struct uvcg_config_group_type uvcg_streaming_grp_type = {
+	.type = {
+		.ct_item_ops	= &uvcg_config_item_ops,
+		.ct_attrs	= uvcg_default_streaming_attrs,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "streaming",
+	.children = (const struct uvcg_config_group_type*[]) {
+		&uvcg_streaming_header_grp_type,
+		&uvcg_uncompressed_grp_type,
+		&uvcg_mjpeg_grp_type,
+		&uvcg_color_matching_grp_type,
+		&uvcg_streaming_class_grp_type,
+		NULL,
+	},
+};
+
+/* -----------------------------------------------------------------------------
+ * UVC function
+ */
+
+static void uvc_func_item_release(struct config_item *item)
+{
+	struct f_uvc_opts *opts = to_f_uvc_opts(item);
+
+	uvcg_config_remove_children(to_config_group(item));
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations uvc_func_item_ops = {
+	.release	= uvc_func_item_release,
+};
+
+#define UVCG_OPTS_ATTR(cname, aname, limit)				\
+static ssize_t f_uvc_opts_##cname##_show(				\
+	struct config_item *item, char *page)				\
+{									\
+	struct f_uvc_opts *opts = to_f_uvc_opts(item);			\
+	int result;							\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%u\n", opts->cname);			\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t								\
+f_uvc_opts_##cname##_store(struct config_item *item,			\
+			   const char *page, size_t len)		\
+{									\
+	struct f_uvc_opts *opts = to_f_uvc_opts(item);			\
+	unsigned int num;						\
+	int ret;							\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt) {						\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	ret = kstrtouint(page, 0, &num);				\
+	if (ret)							\
+		goto end;						\
+									\
+	if (num > limit) {						\
+		ret = -EINVAL;						\
+		goto end;						\
+	}								\
+	opts->cname = num;						\
+	ret = len;							\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+UVC_ATTR(f_uvc_opts_, cname, cname)
+
+UVCG_OPTS_ATTR(streaming_interval, streaming_interval, 16);
+UVCG_OPTS_ATTR(streaming_maxpacket, streaming_maxpacket, 3072);
+UVCG_OPTS_ATTR(streaming_maxburst, streaming_maxburst, 15);
+
+#undef UVCG_OPTS_ATTR
+
+#define UVCG_OPTS_STRING_ATTR(cname, aname)				\
+static ssize_t f_uvc_opts_string_##cname##_show(struct config_item *item,\
+					 char *page)			\
+{									\
+	struct f_uvc_opts *opts = to_f_uvc_opts(item);			\
+	int result;							\
+									\
+	mutex_lock(&opts->lock);					\
+	result = snprintf(page, sizeof(opts->aname), "%s", opts->aname);\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t f_uvc_opts_string_##cname##_store(struct config_item *item,\
+					  const char *page, size_t len)	\
+{									\
+	struct f_uvc_opts *opts = to_f_uvc_opts(item);			\
+	int size = min(sizeof(opts->aname), len + 1);			\
+	int ret = 0;							\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt) {						\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	ret = strscpy(opts->aname, page, size);				\
+	if (ret == -E2BIG)						\
+		ret = size - 1;						\
+									\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+UVC_ATTR(f_uvc_opts_string_, cname, aname)
+
+UVCG_OPTS_STRING_ATTR(function_name, function_name);
+
+#undef UVCG_OPTS_STRING_ATTR
+
+static struct configfs_attribute *uvc_attrs[] = {
+	&f_uvc_opts_attr_streaming_interval,
+	&f_uvc_opts_attr_streaming_maxpacket,
+	&f_uvc_opts_attr_streaming_maxburst,
+	&f_uvc_opts_string_attr_function_name,
+	NULL,
+};
+
+static const struct uvcg_config_group_type uvc_func_type = {
+	.type = {
+		.ct_item_ops	= &uvc_func_item_ops,
+		.ct_attrs	= uvc_attrs,
+		.ct_owner	= THIS_MODULE,
+	},
+	.name = "",
+	.children = (const struct uvcg_config_group_type*[]) {
+		&uvcg_control_grp_type,
+		&uvcg_streaming_grp_type,
+		NULL,
+	},
+};
+
+int uvcg_attach_configfs(struct f_uvc_opts *opts)
+{
+	int ret;
+
+	config_group_init_type_name(&opts->func_inst.group, uvc_func_type.name,
+				    &uvc_func_type.type);
+
+	ret = uvcg_config_create_children(&opts->func_inst.group,
+					  &uvc_func_type);
+	if (ret < 0)
+		config_group_put(&opts->func_inst.group);
+
+	return ret;
+}
diff --git a/drivers/usb/gadget/function/uvc_configfs.h b/drivers/usb/gadget/function/uvc_configfs.h
new file mode 100644
index 000000000..ad2ec8c4c
--- /dev/null
+++ b/drivers/usb/gadget/function/uvc_configfs.h
@@ -0,0 +1,137 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * uvc_configfs.h
+ *
+ * Configfs support for the uvc function.
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+#ifndef UVC_CONFIGFS_H
+#define UVC_CONFIGFS_H
+
+#include <linux/configfs.h>
+
+#include "u_uvc.h"
+
+static inline struct f_uvc_opts *to_f_uvc_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_uvc_opts,
+			    func_inst.group);
+}
+
+#define UVCG_STREAMING_CONTROL_SIZE	1
+
+DECLARE_UVC_HEADER_DESCRIPTOR(1);
+
+struct uvcg_control_header {
+	struct config_item		item;
+	struct UVC_HEADER_DESCRIPTOR(1)	desc;
+	unsigned			linked;
+};
+
+static inline struct uvcg_control_header *to_uvcg_control_header(struct config_item *item)
+{
+	return container_of(item, struct uvcg_control_header, item);
+}
+
+enum uvcg_format_type {
+	UVCG_UNCOMPRESSED = 0,
+	UVCG_MJPEG,
+};
+
+struct uvcg_format {
+	struct config_group	group;
+	enum uvcg_format_type	type;
+	unsigned		linked;
+	struct list_head	frames;
+	unsigned		num_frames;
+	__u8			bmaControls[UVCG_STREAMING_CONTROL_SIZE];
+};
+
+struct uvcg_format_ptr {
+	struct uvcg_format	*fmt;
+	struct list_head	entry;
+};
+
+static inline struct uvcg_format *to_uvcg_format(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct uvcg_format, group);
+}
+
+struct uvcg_streaming_header {
+	struct config_item				item;
+	struct uvc_input_header_descriptor		desc;
+	unsigned					linked;
+	struct list_head				formats;
+	unsigned					num_fmt;
+};
+
+static inline struct uvcg_streaming_header *to_uvcg_streaming_header(struct config_item *item)
+{
+	return container_of(item, struct uvcg_streaming_header, item);
+}
+
+struct uvcg_frame_ptr {
+	struct uvcg_frame	*frm;
+	struct list_head	entry;
+};
+
+struct uvcg_frame {
+	struct config_item	item;
+	enum uvcg_format_type	fmt_type;
+	struct {
+		u8	b_length;
+		u8	b_descriptor_type;
+		u8	b_descriptor_subtype;
+		u8	b_frame_index;
+		u8	bm_capabilities;
+		u16	w_width;
+		u16	w_height;
+		u32	dw_min_bit_rate;
+		u32	dw_max_bit_rate;
+		u32	dw_max_video_frame_buffer_size;
+		u32	dw_default_frame_interval;
+		u8	b_frame_interval_type;
+	} __attribute__((packed)) frame;
+	u32 *dw_frame_interval;
+};
+
+static inline struct uvcg_frame *to_uvcg_frame(struct config_item *item)
+{
+	return container_of(item, struct uvcg_frame, item);
+}
+
+/* -----------------------------------------------------------------------------
+ * streaming/uncompressed/<NAME>
+ */
+
+struct uvcg_uncompressed {
+	struct uvcg_format		fmt;
+	struct uvc_format_uncompressed	desc;
+};
+
+static inline struct uvcg_uncompressed *to_uvcg_uncompressed(struct config_item *item)
+{
+	return container_of(to_uvcg_format(item), struct uvcg_uncompressed, fmt);
+}
+
+/* -----------------------------------------------------------------------------
+ * streaming/mjpeg/<NAME>
+ */
+
+struct uvcg_mjpeg {
+	struct uvcg_format		fmt;
+	struct uvc_format_mjpeg		desc;
+};
+
+static inline struct uvcg_mjpeg *to_uvcg_mjpeg(struct config_item *item)
+{
+	return container_of(to_uvcg_format(item), struct uvcg_mjpeg, fmt);
+}
+
+int uvcg_attach_configfs(struct f_uvc_opts *opts);
+
+#endif /* UVC_CONFIGFS_H */
diff --git a/drivers/usb/gadget/function/uvc_queue.c b/drivers/usb/gadget/function/uvc_queue.c
new file mode 100644
index 000000000..0aa3d7e1f
--- /dev/null
+++ b/drivers/usb/gadget/function/uvc_queue.c
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *	uvc_queue.c  --  USB Video Class driver - Buffers management
+ *
+ *	Copyright (C) 2005-2010
+ *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/atomic.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+
+#include <media/v4l2-common.h>
+#include <media/videobuf2-dma-sg.h>
+#include <media/videobuf2-vmalloc.h>
+
+#include "uvc.h"
+
+/* ------------------------------------------------------------------------
+ * Video buffers queue management.
+ *
+ * Video queues is initialized by uvcg_queue_init(). The function performs
+ * basic initialization of the uvc_video_queue struct and never fails.
+ *
+ * Video buffers are managed by videobuf2. The driver uses a mutex to protect
+ * the videobuf2 queue operations by serializing calls to videobuf2 and a
+ * spinlock to protect the IRQ queue that holds the buffers to be processed by
+ * the driver.
+ */
+
+/* -----------------------------------------------------------------------------
+ * videobuf2 queue operations
+ */
+
+static int uvc_queue_setup(struct vb2_queue *vq,
+			   unsigned int *nbuffers, unsigned int *nplanes,
+			   unsigned int sizes[], struct device *alloc_devs[])
+{
+	struct uvc_video_queue *queue = vb2_get_drv_priv(vq);
+	struct uvc_video *video = container_of(queue, struct uvc_video, queue);
+	unsigned int req_size;
+	unsigned int nreq;
+
+	if (*nbuffers > UVC_MAX_VIDEO_BUFFERS)
+		*nbuffers = UVC_MAX_VIDEO_BUFFERS;
+
+	*nplanes = 1;
+
+	sizes[0] = video->imagesize;
+
+	req_size = video->ep->maxpacket
+		 * max_t(unsigned int, video->ep->maxburst, 1)
+		 * (video->ep->mult);
+
+	/* We divide by two, to increase the chance to run
+	 * into fewer requests for smaller framesizes.
+	 */
+	nreq = DIV_ROUND_UP(DIV_ROUND_UP(sizes[0], 2), req_size);
+	nreq = clamp(nreq, 4U, 64U);
+	video->uvc_num_requests = nreq;
+
+	return 0;
+}
+
+static int uvc_buffer_prepare(struct vb2_buffer *vb)
+{
+	struct uvc_video_queue *queue = vb2_get_drv_priv(vb->vb2_queue);
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct uvc_buffer *buf = container_of(vbuf, struct uvc_buffer, buf);
+
+	if (vb->type == V4L2_BUF_TYPE_VIDEO_OUTPUT &&
+	    vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) {
+		uvc_trace(UVC_TRACE_CAPTURE, "[E] Bytes used out of bounds.\n");
+		return -EINVAL;
+	}
+
+	if (unlikely(queue->flags & UVC_QUEUE_DISCONNECTED))
+		return -ENODEV;
+
+	buf->state = UVC_BUF_STATE_QUEUED;
+	if (queue->use_sg) {
+		buf->sgt = vb2_dma_sg_plane_desc(vb, 0);
+		buf->sg = buf->sgt->sgl;
+	} else {
+		buf->mem = vb2_plane_vaddr(vb, 0);
+	}
+	buf->length = vb2_plane_size(vb, 0);
+	if (vb->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		buf->bytesused = 0;
+	else
+		buf->bytesused = vb2_get_plane_payload(vb, 0);
+
+	return 0;
+}
+
+static void uvc_buffer_queue(struct vb2_buffer *vb)
+{
+	struct uvc_video_queue *queue = vb2_get_drv_priv(vb->vb2_queue);
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct uvc_buffer *buf = container_of(vbuf, struct uvc_buffer, buf);
+	unsigned long flags;
+
+	spin_lock_irqsave(&queue->irqlock, flags);
+
+	if (likely(!(queue->flags & UVC_QUEUE_DISCONNECTED))) {
+		list_add_tail(&buf->queue, &queue->irqqueue);
+	} else {
+		/*
+		 * If the device is disconnected return the buffer to userspace
+		 * directly. The next QBUF call will fail with -ENODEV.
+		 */
+		buf->state = UVC_BUF_STATE_ERROR;
+		vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
+	}
+
+	spin_unlock_irqrestore(&queue->irqlock, flags);
+}
+
+static const struct vb2_ops uvc_queue_qops = {
+	.queue_setup = uvc_queue_setup,
+	.buf_prepare = uvc_buffer_prepare,
+	.buf_queue = uvc_buffer_queue,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+};
+
+int uvcg_queue_init(struct uvc_video_queue *queue, struct device *dev, enum v4l2_buf_type type,
+		    struct mutex *lock)
+{
+	struct uvc_video *video = container_of(queue, struct uvc_video, queue);
+	struct usb_composite_dev *cdev = video->uvc->func.config->cdev;
+	int ret;
+
+	queue->queue.type = type;
+	queue->queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
+	queue->queue.drv_priv = queue;
+	queue->queue.buf_struct_size = sizeof(struct uvc_buffer);
+	queue->queue.ops = &uvc_queue_qops;
+	queue->queue.lock = lock;
+	if (cdev->gadget->sg_supported) {
+		queue->queue.mem_ops = &vb2_dma_sg_memops;
+		queue->use_sg = 1;
+	} else {
+		queue->queue.mem_ops = &vb2_vmalloc_memops;
+	}
+
+	queue->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY
+				     | V4L2_BUF_FLAG_TSTAMP_SRC_EOF;
+	queue->queue.dev = dev;
+
+	ret = vb2_queue_init(&queue->queue);
+	if (ret)
+		return ret;
+
+	spin_lock_init(&queue->irqlock);
+	INIT_LIST_HEAD(&queue->irqqueue);
+	queue->flags = 0;
+
+	return 0;
+}
+
+/*
+ * Free the video buffers.
+ */
+void uvcg_free_buffers(struct uvc_video_queue *queue)
+{
+	vb2_queue_release(&queue->queue);
+}
+
+/*
+ * Allocate the video buffers.
+ */
+int uvcg_alloc_buffers(struct uvc_video_queue *queue,
+			      struct v4l2_requestbuffers *rb)
+{
+	int ret;
+
+	ret = vb2_reqbufs(&queue->queue, rb);
+
+	return ret ? ret : rb->count;
+}
+
+int uvcg_query_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf)
+{
+	return vb2_querybuf(&queue->queue, buf);
+}
+
+int uvcg_queue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf)
+{
+	return vb2_qbuf(&queue->queue, NULL, buf);
+}
+
+/*
+ * Dequeue a video buffer. If nonblocking is false, block until a buffer is
+ * available.
+ */
+int uvcg_dequeue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf,
+			int nonblocking)
+{
+	return vb2_dqbuf(&queue->queue, buf, nonblocking);
+}
+
+/*
+ * Poll the video queue.
+ *
+ * This function implements video queue polling and is intended to be used by
+ * the device poll handler.
+ */
+__poll_t uvcg_queue_poll(struct uvc_video_queue *queue, struct file *file,
+			     poll_table *wait)
+{
+	return vb2_poll(&queue->queue, file, wait);
+}
+
+int uvcg_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma)
+{
+	return vb2_mmap(&queue->queue, vma);
+}
+
+#ifndef CONFIG_MMU
+/*
+ * Get unmapped area.
+ *
+ * NO-MMU arch need this function to make mmap() work correctly.
+ */
+unsigned long uvcg_queue_get_unmapped_area(struct uvc_video_queue *queue,
+					   unsigned long pgoff)
+{
+	return vb2_get_unmapped_area(&queue->queue, 0, 0, pgoff, 0);
+}
+#endif
+
+/*
+ * Cancel the video buffers queue.
+ *
+ * Cancelling the queue marks all buffers on the irq queue as erroneous,
+ * wakes them up and removes them from the queue.
+ *
+ * If the disconnect parameter is set, further calls to uvc_queue_buffer will
+ * fail with -ENODEV.
+ *
+ * This function acquires the irq spinlock and can be called from interrupt
+ * context.
+ */
+void uvcg_queue_cancel(struct uvc_video_queue *queue, int disconnect)
+{
+	struct uvc_buffer *buf;
+	unsigned long flags;
+
+	spin_lock_irqsave(&queue->irqlock, flags);
+	while (!list_empty(&queue->irqqueue)) {
+		buf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
+				       queue);
+		list_del(&buf->queue);
+		buf->state = UVC_BUF_STATE_ERROR;
+		vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_ERROR);
+	}
+	queue->buf_used = 0;
+
+	/*
+	 * This must be protected by the irqlock spinlock to avoid race
+	 * conditions between uvc_queue_buffer and the disconnection event that
+	 * could result in an interruptible wait in uvc_dequeue_buffer. Do not
+	 * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED
+	 * state outside the queue code.
+	 */
+	if (disconnect)
+		queue->flags |= UVC_QUEUE_DISCONNECTED;
+	spin_unlock_irqrestore(&queue->irqlock, flags);
+}
+
+/*
+ * Enable or disable the video buffers queue.
+ *
+ * The queue must be enabled before starting video acquisition and must be
+ * disabled after stopping it. This ensures that the video buffers queue
+ * state can be properly initialized before buffers are accessed from the
+ * interrupt handler.
+ *
+ * Enabling the video queue initializes parameters (such as sequence number,
+ * sync pattern, ...). If the queue is already enabled, return -EBUSY.
+ *
+ * Disabling the video queue cancels the queue and removes all buffers from
+ * the main queue.
+ *
+ * This function can't be called from interrupt context. Use
+ * uvcg_queue_cancel() instead.
+ */
+int uvcg_queue_enable(struct uvc_video_queue *queue, int enable)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	if (enable) {
+		ret = vb2_streamon(&queue->queue, queue->queue.type);
+		if (ret < 0)
+			return ret;
+
+		queue->sequence = 0;
+		queue->buf_used = 0;
+		queue->flags &= ~UVC_QUEUE_DROP_INCOMPLETE;
+	} else {
+		ret = vb2_streamoff(&queue->queue, queue->queue.type);
+		if (ret < 0)
+			return ret;
+
+		spin_lock_irqsave(&queue->irqlock, flags);
+		INIT_LIST_HEAD(&queue->irqqueue);
+
+		/*
+		 * FIXME: We need to clear the DISCONNECTED flag to ensure that
+		 * applications will be able to queue buffers for the next
+		 * streaming run. However, clearing it here doesn't guarantee
+		 * that the device will be reconnected in the meantime.
+		 */
+		queue->flags &= ~UVC_QUEUE_DISCONNECTED;
+		spin_unlock_irqrestore(&queue->irqlock, flags);
+	}
+
+	return ret;
+}
+
+/* called with &queue_irqlock held.. */
+void uvcg_complete_buffer(struct uvc_video_queue *queue,
+					  struct uvc_buffer *buf)
+{
+	if (queue->flags & UVC_QUEUE_DROP_INCOMPLETE) {
+		queue->flags &= ~UVC_QUEUE_DROP_INCOMPLETE;
+		buf->state = UVC_BUF_STATE_ERROR;
+		vb2_set_plane_payload(&buf->buf.vb2_buf, 0, 0);
+		vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_ERROR);
+		return;
+	}
+
+	buf->buf.field = V4L2_FIELD_NONE;
+	buf->buf.sequence = queue->sequence++;
+	buf->buf.vb2_buf.timestamp = ktime_get_ns();
+
+	vb2_set_plane_payload(&buf->buf.vb2_buf, 0, buf->bytesused);
+	vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_DONE);
+}
+
+struct uvc_buffer *uvcg_queue_head(struct uvc_video_queue *queue)
+{
+	struct uvc_buffer *buf = NULL;
+
+	if (!list_empty(&queue->irqqueue))
+		buf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
+				       queue);
+
+	return buf;
+}
+
diff --git a/drivers/usb/gadget/function/uvc_queue.h b/drivers/usb/gadget/function/uvc_queue.h
new file mode 100644
index 000000000..41f87b917
--- /dev/null
+++ b/drivers/usb/gadget/function/uvc_queue.h
@@ -0,0 +1,101 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _UVC_QUEUE_H_
+#define _UVC_QUEUE_H_
+
+#include <linux/list.h>
+#include <linux/poll.h>
+#include <linux/spinlock.h>
+
+#include <media/videobuf2-v4l2.h>
+
+struct file;
+struct mutex;
+
+/* Maximum frame size in bytes, for sanity checking. */
+#define UVC_MAX_FRAME_SIZE	(16*1024*1024)
+/* Maximum number of video buffers. */
+#define UVC_MAX_VIDEO_BUFFERS	32
+
+/* ------------------------------------------------------------------------
+ * Structures.
+ */
+
+enum uvc_buffer_state {
+	UVC_BUF_STATE_IDLE	= 0,
+	UVC_BUF_STATE_QUEUED	= 1,
+	UVC_BUF_STATE_ACTIVE	= 2,
+	UVC_BUF_STATE_DONE	= 3,
+	UVC_BUF_STATE_ERROR	= 4,
+};
+
+struct uvc_buffer {
+	struct vb2_v4l2_buffer buf;
+	struct list_head queue;
+
+	enum uvc_buffer_state state;
+	void *mem;
+	struct sg_table *sgt;
+	struct scatterlist *sg;
+	unsigned int offset;
+	unsigned int length;
+	unsigned int bytesused;
+};
+
+#define UVC_QUEUE_DISCONNECTED		(1 << 0)
+#define UVC_QUEUE_DROP_INCOMPLETE	(1 << 1)
+
+struct uvc_video_queue {
+	struct vb2_queue queue;
+
+	unsigned int flags;
+	__u32 sequence;
+
+	unsigned int buf_used;
+
+	bool use_sg;
+
+	spinlock_t irqlock;	/* Protects flags and irqqueue */
+	struct list_head irqqueue;
+};
+
+static inline int uvc_queue_streaming(struct uvc_video_queue *queue)
+{
+	return vb2_is_streaming(&queue->queue);
+}
+
+int uvcg_queue_init(struct uvc_video_queue *queue, struct device *dev, enum v4l2_buf_type type,
+		    struct mutex *lock);
+
+void uvcg_free_buffers(struct uvc_video_queue *queue);
+
+int uvcg_alloc_buffers(struct uvc_video_queue *queue,
+		       struct v4l2_requestbuffers *rb);
+
+int uvcg_query_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf);
+
+int uvcg_queue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf);
+
+int uvcg_dequeue_buffer(struct uvc_video_queue *queue,
+			struct v4l2_buffer *buf, int nonblocking);
+
+__poll_t uvcg_queue_poll(struct uvc_video_queue *queue,
+			     struct file *file, poll_table *wait);
+
+int uvcg_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma);
+
+#ifndef CONFIG_MMU
+unsigned long uvcg_queue_get_unmapped_area(struct uvc_video_queue *queue,
+					   unsigned long pgoff);
+#endif /* CONFIG_MMU */
+
+void uvcg_queue_cancel(struct uvc_video_queue *queue, int disconnect);
+
+int uvcg_queue_enable(struct uvc_video_queue *queue, int enable);
+
+void uvcg_complete_buffer(struct uvc_video_queue *queue,
+					  struct uvc_buffer *buf);
+
+struct uvc_buffer *uvcg_queue_head(struct uvc_video_queue *queue);
+
+#endif /* _UVC_QUEUE_H_ */
+
diff --git a/drivers/usb/gadget/function/uvc_v4l2.c b/drivers/usb/gadget/function/uvc_v4l2.c
new file mode 100644
index 000000000..a189b08bb
--- /dev/null
+++ b/drivers/usb/gadget/function/uvc_v4l2.c
@@ -0,0 +1,656 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *	uvc_v4l2.c  --  USB Video Class Gadget driver
+ *
+ *	Copyright (C) 2009-2010
+ *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/usb/g_uvc.h>
+#include <linux/videodev2.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+
+#include <media/v4l2-dev.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-uvc.h>
+
+#include "f_uvc.h"
+#include "uvc.h"
+#include "uvc_queue.h"
+#include "uvc_video.h"
+#include "uvc_v4l2.h"
+#include "uvc_configfs.h"
+
+static struct uvc_format_desc *to_uvc_format(struct uvcg_format *uformat)
+{
+	char guid[16] = UVC_GUID_FORMAT_MJPEG;
+	struct uvc_format_desc *format;
+	struct uvcg_uncompressed *unc;
+
+	if (uformat->type == UVCG_UNCOMPRESSED) {
+		unc = to_uvcg_uncompressed(&uformat->group.cg_item);
+		if (!unc)
+			return ERR_PTR(-EINVAL);
+
+		memcpy(guid, unc->desc.guidFormat, sizeof(guid));
+	}
+
+	format = uvc_format_by_guid(guid);
+	if (!format)
+		return ERR_PTR(-EINVAL);
+
+	return format;
+}
+
+static int uvc_v4l2_get_bytesperline(struct uvcg_format *uformat,
+			      struct uvcg_frame *uframe)
+{
+	struct uvcg_uncompressed *u;
+
+	if (uformat->type == UVCG_UNCOMPRESSED) {
+		u = to_uvcg_uncompressed(&uformat->group.cg_item);
+		if (!u)
+			return 0;
+
+		return u->desc.bBitsPerPixel * uframe->frame.w_width / 8;
+	}
+
+	return 0;
+}
+
+static int uvc_get_frame_size(struct uvcg_format *uformat,
+		       struct uvcg_frame *uframe)
+{
+	unsigned int bpl = uvc_v4l2_get_bytesperline(uformat, uframe);
+
+	return bpl ? bpl * uframe->frame.w_height :
+		uframe->frame.dw_max_video_frame_buffer_size;
+}
+
+static struct uvcg_format *find_format_by_index(struct uvc_device *uvc, int index)
+{
+	struct uvcg_format_ptr *format;
+	struct uvcg_format *uformat = NULL;
+	int i = 1;
+
+	list_for_each_entry(format, &uvc->header->formats, entry) {
+		if (index == i) {
+			uformat = format->fmt;
+			break;
+		}
+		i++;
+	}
+
+	return uformat;
+}
+
+static struct uvcg_frame *find_frame_by_index(struct uvc_device *uvc,
+				       struct uvcg_format *uformat,
+				       int index)
+{
+	struct uvcg_format_ptr *format;
+	struct uvcg_frame_ptr *frame;
+	struct uvcg_frame *uframe = NULL;
+
+	list_for_each_entry(format, &uvc->header->formats, entry) {
+		if (format->fmt->type != uformat->type)
+			continue;
+		list_for_each_entry(frame, &format->fmt->frames, entry) {
+			if (index == frame->frm->frame.b_frame_index) {
+				uframe = frame->frm;
+				break;
+			}
+		}
+	}
+
+	return uframe;
+}
+
+static struct uvcg_format *find_format_by_pix(struct uvc_device *uvc,
+					      u32 pixelformat)
+{
+	struct uvcg_format_ptr *format;
+	struct uvcg_format *uformat = NULL;
+
+	list_for_each_entry(format, &uvc->header->formats, entry) {
+		struct uvc_format_desc *fmtdesc = to_uvc_format(format->fmt);
+
+		if (fmtdesc->fcc == pixelformat) {
+			uformat = format->fmt;
+			break;
+		}
+	}
+
+	return uformat;
+}
+
+static struct uvcg_frame *find_closest_frame_by_size(struct uvc_device *uvc,
+					   struct uvcg_format *uformat,
+					   u16 rw, u16 rh)
+{
+	struct uvc_video *video = &uvc->video;
+	struct uvcg_format_ptr *format;
+	struct uvcg_frame_ptr *frame;
+	struct uvcg_frame *uframe = NULL;
+	unsigned int d, maxd;
+
+	/* Find the closest image size. The distance between image sizes is
+	 * the size in pixels of the non-overlapping regions between the
+	 * requested size and the frame-specified size.
+	 */
+	maxd = (unsigned int)-1;
+
+	list_for_each_entry(format, &uvc->header->formats, entry) {
+		if (format->fmt->type != uformat->type)
+			continue;
+
+		list_for_each_entry(frame, &format->fmt->frames, entry) {
+			u16 w, h;
+
+			w = frame->frm->frame.w_width;
+			h = frame->frm->frame.w_height;
+
+			d = min(w, rw) * min(h, rh);
+			d = w*h + rw*rh - 2*d;
+			if (d < maxd) {
+				maxd = d;
+				uframe = frame->frm;
+			}
+
+			if (maxd == 0)
+				break;
+		}
+	}
+
+	if (!uframe)
+		uvcg_dbg(&video->uvc->func, "Unsupported size %ux%u\n", rw, rh);
+
+	return uframe;
+}
+
+/* --------------------------------------------------------------------------
+ * Requests handling
+ */
+
+static int
+uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data)
+{
+	struct usb_composite_dev *cdev = uvc->func.config->cdev;
+	struct usb_request *req = uvc->control_req;
+
+	if (data->length < 0)
+		return usb_ep_set_halt(cdev->gadget->ep0);
+
+	req->length = min_t(unsigned int, uvc->event_length, data->length);
+	req->zero = data->length < uvc->event_length;
+
+	memcpy(req->buf, data->data, req->length);
+
+	return usb_ep_queue(cdev->gadget->ep0, req, GFP_KERNEL);
+}
+
+/* --------------------------------------------------------------------------
+ * V4L2 ioctls
+ */
+
+static int
+uvc_v4l2_querycap(struct file *file, void *fh, struct v4l2_capability *cap)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct usb_composite_dev *cdev = uvc->func.config->cdev;
+
+	strscpy(cap->driver, "g_uvc", sizeof(cap->driver));
+	strscpy(cap->card, cdev->gadget->name, sizeof(cap->card));
+	strscpy(cap->bus_info, dev_name(&cdev->gadget->dev),
+		sizeof(cap->bus_info));
+	return 0;
+}
+
+static int
+uvc_v4l2_get_format(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_video *video = &uvc->video;
+
+	fmt->fmt.pix.pixelformat = video->fcc;
+	fmt->fmt.pix.width = video->width;
+	fmt->fmt.pix.height = video->height;
+	fmt->fmt.pix.field = V4L2_FIELD_NONE;
+	fmt->fmt.pix.bytesperline = video->bpp * video->width / 8;
+	fmt->fmt.pix.sizeimage = video->imagesize;
+	fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB;
+	fmt->fmt.pix.priv = 0;
+
+	return 0;
+}
+
+static int
+uvc_v4l2_try_format(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_video *video = &uvc->video;
+	struct uvcg_format *uformat;
+	struct uvcg_frame *uframe;
+	u8 *fcc;
+
+	if (fmt->type != video->queue.queue.type)
+		return -EINVAL;
+
+	fcc = (u8 *)&fmt->fmt.pix.pixelformat;
+	uvcg_dbg(&uvc->func, "Trying format 0x%08x (%c%c%c%c): %ux%u\n",
+		fmt->fmt.pix.pixelformat,
+		fcc[0], fcc[1], fcc[2], fcc[3],
+		fmt->fmt.pix.width, fmt->fmt.pix.height);
+
+	uformat = find_format_by_pix(uvc, fmt->fmt.pix.pixelformat);
+	if (!uformat)
+		return -EINVAL;
+
+	uframe = find_closest_frame_by_size(uvc, uformat,
+				fmt->fmt.pix.width, fmt->fmt.pix.height);
+	if (!uframe)
+		return -EINVAL;
+
+	fmt->fmt.pix.width = uframe->frame.w_width;
+	fmt->fmt.pix.height = uframe->frame.w_height;
+	fmt->fmt.pix.field = V4L2_FIELD_NONE;
+	fmt->fmt.pix.bytesperline = uvc_v4l2_get_bytesperline(uformat, uframe);
+	fmt->fmt.pix.sizeimage = uvc_get_frame_size(uformat, uframe);
+	fmt->fmt.pix.pixelformat = to_uvc_format(uformat)->fcc;
+	fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB;
+	fmt->fmt.pix.priv = 0;
+
+	return 0;
+}
+
+static int
+uvc_v4l2_set_format(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_video *video = &uvc->video;
+	int ret;
+
+	ret = uvc_v4l2_try_format(file, fh, fmt);
+	if (ret)
+		return ret;
+
+	video->fcc = fmt->fmt.pix.pixelformat;
+	video->bpp = fmt->fmt.pix.bytesperline * 8 / video->width;
+	video->width = fmt->fmt.pix.width;
+	video->height = fmt->fmt.pix.height;
+	video->imagesize = fmt->fmt.pix.sizeimage;
+
+	return ret;
+}
+
+static int
+uvc_v4l2_enum_frameintervals(struct file *file, void *fh,
+		struct v4l2_frmivalenum *fival)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvcg_format *uformat = NULL;
+	struct uvcg_frame *uframe = NULL;
+	struct uvcg_frame_ptr *frame;
+
+	uformat = find_format_by_pix(uvc, fival->pixel_format);
+	if (!uformat)
+		return -EINVAL;
+
+	list_for_each_entry(frame, &uformat->frames, entry) {
+		if (frame->frm->frame.w_width == fival->width &&
+		    frame->frm->frame.w_height == fival->height) {
+			uframe = frame->frm;
+			break;
+		}
+	}
+	if (!uframe)
+		return -EINVAL;
+
+	if (fival->index >= uframe->frame.b_frame_interval_type)
+		return -EINVAL;
+
+	fival->discrete.numerator =
+		uframe->dw_frame_interval[fival->index];
+
+	/* TODO: handle V4L2_FRMIVAL_TYPE_STEPWISE */
+	fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
+	fival->discrete.denominator = 10000000;
+	v4l2_simplify_fraction(&fival->discrete.numerator,
+		&fival->discrete.denominator, 8, 333);
+
+	return 0;
+}
+
+static int
+uvc_v4l2_enum_framesizes(struct file *file, void *fh,
+		struct v4l2_frmsizeenum *fsize)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvcg_format *uformat = NULL;
+	struct uvcg_frame *uframe = NULL;
+
+	uformat = find_format_by_pix(uvc, fsize->pixel_format);
+	if (!uformat)
+		return -EINVAL;
+
+	if (fsize->index >= uformat->num_frames)
+		return -EINVAL;
+
+	uframe = find_frame_by_index(uvc, uformat, fsize->index + 1);
+	if (!uframe)
+		return -EINVAL;
+
+	fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+	fsize->discrete.width = uframe->frame.w_width;
+	fsize->discrete.height = uframe->frame.w_height;
+
+	return 0;
+}
+
+static int
+uvc_v4l2_enum_format(struct file *file, void *fh, struct v4l2_fmtdesc *f)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_format_desc *fmtdesc;
+	struct uvcg_format *uformat;
+
+	if (f->index >= uvc->header->num_fmt)
+		return -EINVAL;
+
+	uformat = find_format_by_index(uvc, f->index + 1);
+	if (!uformat)
+		return -EINVAL;
+
+	if (uformat->type != UVCG_UNCOMPRESSED)
+		f->flags |= V4L2_FMT_FLAG_COMPRESSED;
+
+	fmtdesc = to_uvc_format(uformat);
+	f->pixelformat = fmtdesc->fcc;
+
+	strscpy(f->description, fmtdesc->name, sizeof(f->description));
+	f->description[strlen(fmtdesc->name) - 1] = 0;
+
+	return 0;
+}
+
+static int
+uvc_v4l2_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *b)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_video *video = &uvc->video;
+
+	if (b->type != video->queue.queue.type)
+		return -EINVAL;
+
+	return uvcg_alloc_buffers(&video->queue, b);
+}
+
+static int
+uvc_v4l2_querybuf(struct file *file, void *fh, struct v4l2_buffer *b)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_video *video = &uvc->video;
+
+	return uvcg_query_buffer(&video->queue, b);
+}
+
+static int
+uvc_v4l2_qbuf(struct file *file, void *fh, struct v4l2_buffer *b)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_video *video = &uvc->video;
+	int ret;
+
+	ret = uvcg_queue_buffer(&video->queue, b);
+	if (ret < 0)
+		return ret;
+
+	if (uvc->state == UVC_STATE_STREAMING)
+		queue_work(video->async_wq, &video->pump);
+
+	return ret;
+}
+
+static int
+uvc_v4l2_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_video *video = &uvc->video;
+
+	return uvcg_dequeue_buffer(&video->queue, b, file->f_flags & O_NONBLOCK);
+}
+
+static int
+uvc_v4l2_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_video *video = &uvc->video;
+	int ret;
+
+	if (type != video->queue.queue.type)
+		return -EINVAL;
+
+	/* Enable UVC video. */
+	ret = uvcg_video_enable(video, 1);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Complete the alternate setting selection setup phase now that
+	 * userspace is ready to provide video frames.
+	 */
+	uvc_function_setup_continue(uvc);
+	uvc->state = UVC_STATE_STREAMING;
+
+	return 0;
+}
+
+static int
+uvc_v4l2_streamoff(struct file *file, void *fh, enum v4l2_buf_type type)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_video *video = &uvc->video;
+
+	if (type != video->queue.queue.type)
+		return -EINVAL;
+
+	return uvcg_video_enable(video, 0);
+}
+
+static int
+uvc_v4l2_subscribe_event(struct v4l2_fh *fh,
+			 const struct v4l2_event_subscription *sub)
+{
+	struct uvc_device *uvc = video_get_drvdata(fh->vdev);
+	struct uvc_file_handle *handle = to_uvc_file_handle(fh);
+	int ret;
+
+	if (sub->type < UVC_EVENT_FIRST || sub->type > UVC_EVENT_LAST)
+		return -EINVAL;
+
+	if (sub->type == UVC_EVENT_SETUP && uvc->func_connected)
+		return -EBUSY;
+
+	ret = v4l2_event_subscribe(fh, sub, 2, NULL);
+	if (ret < 0)
+		return ret;
+
+	if (sub->type == UVC_EVENT_SETUP) {
+		uvc->func_connected = true;
+		handle->is_uvc_app_handle = true;
+		uvc_function_connect(uvc);
+	}
+
+	return 0;
+}
+
+static void uvc_v4l2_disable(struct uvc_device *uvc)
+{
+	uvc_function_disconnect(uvc);
+	uvcg_video_enable(&uvc->video, 0);
+	uvcg_free_buffers(&uvc->video.queue);
+	uvc->func_connected = false;
+	wake_up_interruptible(&uvc->func_connected_queue);
+}
+
+static int
+uvc_v4l2_unsubscribe_event(struct v4l2_fh *fh,
+			   const struct v4l2_event_subscription *sub)
+{
+	struct uvc_device *uvc = video_get_drvdata(fh->vdev);
+	struct uvc_file_handle *handle = to_uvc_file_handle(fh);
+	int ret;
+
+	ret = v4l2_event_unsubscribe(fh, sub);
+	if (ret < 0)
+		return ret;
+
+	if (sub->type == UVC_EVENT_SETUP && handle->is_uvc_app_handle) {
+		uvc_v4l2_disable(uvc);
+		handle->is_uvc_app_handle = false;
+	}
+
+	return 0;
+}
+
+static long
+uvc_v4l2_ioctl_default(struct file *file, void *fh, bool valid_prio,
+		       unsigned int cmd, void *arg)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+
+	switch (cmd) {
+	case UVCIOC_SEND_RESPONSE:
+		return uvc_send_response(uvc, arg);
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+const struct v4l2_ioctl_ops uvc_v4l2_ioctl_ops = {
+	.vidioc_querycap = uvc_v4l2_querycap,
+	.vidioc_try_fmt_vid_out = uvc_v4l2_try_format,
+	.vidioc_g_fmt_vid_out = uvc_v4l2_get_format,
+	.vidioc_s_fmt_vid_out = uvc_v4l2_set_format,
+	.vidioc_enum_frameintervals = uvc_v4l2_enum_frameintervals,
+	.vidioc_enum_framesizes = uvc_v4l2_enum_framesizes,
+	.vidioc_enum_fmt_vid_out = uvc_v4l2_enum_format,
+	.vidioc_reqbufs = uvc_v4l2_reqbufs,
+	.vidioc_querybuf = uvc_v4l2_querybuf,
+	.vidioc_qbuf = uvc_v4l2_qbuf,
+	.vidioc_dqbuf = uvc_v4l2_dqbuf,
+	.vidioc_streamon = uvc_v4l2_streamon,
+	.vidioc_streamoff = uvc_v4l2_streamoff,
+	.vidioc_subscribe_event = uvc_v4l2_subscribe_event,
+	.vidioc_unsubscribe_event = uvc_v4l2_unsubscribe_event,
+	.vidioc_default = uvc_v4l2_ioctl_default,
+};
+
+/* --------------------------------------------------------------------------
+ * V4L2
+ */
+
+static int
+uvc_v4l2_open(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_file_handle *handle;
+
+	handle = kzalloc(sizeof(*handle), GFP_KERNEL);
+	if (handle == NULL)
+		return -ENOMEM;
+
+	v4l2_fh_init(&handle->vfh, vdev);
+	v4l2_fh_add(&handle->vfh);
+
+	handle->device = &uvc->video;
+	file->private_data = &handle->vfh;
+
+	return 0;
+}
+
+static int
+uvc_v4l2_release(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_file_handle *handle = to_uvc_file_handle(file->private_data);
+	struct uvc_video *video = handle->device;
+
+	mutex_lock(&video->mutex);
+	if (handle->is_uvc_app_handle)
+		uvc_v4l2_disable(uvc);
+	mutex_unlock(&video->mutex);
+
+	file->private_data = NULL;
+	v4l2_fh_del(&handle->vfh);
+	v4l2_fh_exit(&handle->vfh);
+	kfree(handle);
+
+	return 0;
+}
+
+static int
+uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+
+	return uvcg_queue_mmap(&uvc->video.queue, vma);
+}
+
+static __poll_t
+uvc_v4l2_poll(struct file *file, poll_table *wait)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+
+	return uvcg_queue_poll(&uvc->video.queue, file, wait);
+}
+
+#ifndef CONFIG_MMU
+static unsigned long uvcg_v4l2_get_unmapped_area(struct file *file,
+		unsigned long addr, unsigned long len, unsigned long pgoff,
+		unsigned long flags)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+
+	return uvcg_queue_get_unmapped_area(&uvc->video.queue, pgoff);
+}
+#endif
+
+const struct v4l2_file_operations uvc_v4l2_fops = {
+	.owner		= THIS_MODULE,
+	.open		= uvc_v4l2_open,
+	.release	= uvc_v4l2_release,
+	.unlocked_ioctl	= video_ioctl2,
+	.mmap		= uvc_v4l2_mmap,
+	.poll		= uvc_v4l2_poll,
+#ifndef CONFIG_MMU
+	.get_unmapped_area = uvcg_v4l2_get_unmapped_area,
+#endif
+};
+
diff --git a/drivers/usb/gadget/function/uvc_v4l2.h b/drivers/usb/gadget/function/uvc_v4l2.h
new file mode 100644
index 000000000..1576005b6
--- /dev/null
+++ b/drivers/usb/gadget/function/uvc_v4l2.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *	uvc_v4l2.h  --  USB Video Class Gadget driver
+ *
+ * Copyright (C) 2009-2010
+ *		Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *		Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#ifndef __UVC_V4L2_H__
+#define __UVC_V4L2_H__
+
+extern const struct v4l2_ioctl_ops uvc_v4l2_ioctl_ops;
+extern const struct v4l2_file_operations uvc_v4l2_fops;
+
+#endif /* __UVC_V4L2_H__ */
diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
new file mode 100644
index 000000000..e81865978
--- /dev/null
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -0,0 +1,546 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *	uvc_video.c  --  USB Video Class Gadget driver
+ *
+ *	Copyright (C) 2009-2010
+ *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/video.h>
+#include <asm/unaligned.h>
+
+#include <media/v4l2-dev.h>
+
+#include "uvc.h"
+#include "uvc_queue.h"
+#include "uvc_video.h"
+
+/* --------------------------------------------------------------------------
+ * Video codecs
+ */
+
+static int
+uvc_video_encode_header(struct uvc_video *video, struct uvc_buffer *buf,
+		u8 *data, int len)
+{
+	struct uvc_device *uvc = container_of(video, struct uvc_device, video);
+	struct usb_composite_dev *cdev = uvc->func.config->cdev;
+	struct timespec64 ts = ns_to_timespec64(buf->buf.vb2_buf.timestamp);
+	int pos = 2;
+
+	data[1] = UVC_STREAM_EOH | video->fid;
+
+	if (video->queue.buf_used == 0 && ts.tv_sec) {
+		/* dwClockFrequency is 48 MHz */
+		u32 pts = ((u64)ts.tv_sec * USEC_PER_SEC + ts.tv_nsec / NSEC_PER_USEC) * 48;
+
+		data[1] |= UVC_STREAM_PTS;
+		put_unaligned_le32(pts, &data[pos]);
+		pos += 4;
+	}
+
+	if (cdev->gadget->ops->get_frame) {
+		u32 sof, stc;
+
+		sof = usb_gadget_frame_number(cdev->gadget);
+		ktime_get_ts64(&ts);
+		stc = ((u64)ts.tv_sec * USEC_PER_SEC + ts.tv_nsec / NSEC_PER_USEC) * 48;
+
+		data[1] |= UVC_STREAM_SCR;
+		put_unaligned_le32(stc, &data[pos]);
+		put_unaligned_le16(sof, &data[pos+4]);
+		pos += 6;
+	}
+
+	data[0] = pos;
+
+	if (buf->bytesused - video->queue.buf_used <= len - pos)
+		data[1] |= UVC_STREAM_EOF;
+
+	return pos;
+}
+
+static int
+uvc_video_encode_data(struct uvc_video *video, struct uvc_buffer *buf,
+		u8 *data, int len)
+{
+	struct uvc_video_queue *queue = &video->queue;
+	unsigned int nbytes;
+	void *mem;
+
+	/* Copy video data to the USB buffer. */
+	mem = buf->mem + queue->buf_used;
+	nbytes = min((unsigned int)len, buf->bytesused - queue->buf_used);
+
+	memcpy(data, mem, nbytes);
+	queue->buf_used += nbytes;
+
+	return nbytes;
+}
+
+static void
+uvc_video_encode_bulk(struct usb_request *req, struct uvc_video *video,
+		struct uvc_buffer *buf)
+{
+	void *mem = req->buf;
+	struct uvc_request *ureq = req->context;
+	int len = video->req_size;
+	int ret;
+
+	/* Add a header at the beginning of the payload. */
+	if (video->payload_size == 0) {
+		ret = uvc_video_encode_header(video, buf, mem, len);
+		video->payload_size += ret;
+		mem += ret;
+		len -= ret;
+	}
+
+	/* Process video data. */
+	len = min((int)(video->max_payload_size - video->payload_size), len);
+	ret = uvc_video_encode_data(video, buf, mem, len);
+
+	video->payload_size += ret;
+	len -= ret;
+
+	req->length = video->req_size - len;
+	req->zero = video->payload_size == video->max_payload_size;
+
+	if (buf->bytesused == video->queue.buf_used) {
+		video->queue.buf_used = 0;
+		buf->state = UVC_BUF_STATE_DONE;
+		list_del(&buf->queue);
+		video->fid ^= UVC_STREAM_FID;
+		ureq->last_buf = buf;
+
+		video->payload_size = 0;
+	}
+
+	if (video->payload_size == video->max_payload_size ||
+	    video->queue.flags & UVC_QUEUE_DROP_INCOMPLETE ||
+	    buf->bytesused == video->queue.buf_used)
+		video->payload_size = 0;
+}
+
+static void
+uvc_video_encode_isoc_sg(struct usb_request *req, struct uvc_video *video,
+		struct uvc_buffer *buf)
+{
+	unsigned int pending = buf->bytesused - video->queue.buf_used;
+	struct uvc_request *ureq = req->context;
+	struct scatterlist *sg, *iter;
+	unsigned int len = video->req_size;
+	unsigned int sg_left, part = 0;
+	unsigned int i;
+	int header_len;
+
+	sg = ureq->sgt.sgl;
+	sg_init_table(sg, ureq->sgt.nents);
+
+	/* Init the header. */
+	header_len = uvc_video_encode_header(video, buf, ureq->header,
+				      video->req_size);
+	sg_set_buf(sg, ureq->header, header_len);
+	len -= header_len;
+
+	if (pending <= len)
+		len = pending;
+
+	req->length = (len == pending) ?
+		len + header_len : video->req_size;
+
+	/* Init the pending sgs with payload */
+	sg = sg_next(sg);
+
+	for_each_sg(sg, iter, ureq->sgt.nents - 1, i) {
+		if (!len || !buf->sg || !buf->sg->length)
+			break;
+
+		sg_left = buf->sg->length - buf->offset;
+		part = min_t(unsigned int, len, sg_left);
+
+		sg_set_page(iter, sg_page(buf->sg), part, buf->offset);
+
+		if (part == sg_left) {
+			buf->offset = 0;
+			buf->sg = sg_next(buf->sg);
+		} else {
+			buf->offset += part;
+		}
+		len -= part;
+	}
+
+	/* Assign the video data with header. */
+	req->buf = NULL;
+	req->sg	= ureq->sgt.sgl;
+	req->num_sgs = i + 1;
+
+	req->length -= len;
+	video->queue.buf_used += req->length - header_len;
+
+	if (buf->bytesused == video->queue.buf_used || !buf->sg ||
+			video->queue.flags & UVC_QUEUE_DROP_INCOMPLETE) {
+		video->queue.buf_used = 0;
+		buf->state = UVC_BUF_STATE_DONE;
+		buf->offset = 0;
+		list_del(&buf->queue);
+		video->fid ^= UVC_STREAM_FID;
+		ureq->last_buf = buf;
+	}
+}
+
+static void
+uvc_video_encode_isoc(struct usb_request *req, struct uvc_video *video,
+		struct uvc_buffer *buf)
+{
+	void *mem = req->buf;
+	struct uvc_request *ureq = req->context;
+	int len = video->req_size;
+	int ret;
+
+	/* Add the header. */
+	ret = uvc_video_encode_header(video, buf, mem, len);
+	mem += ret;
+	len -= ret;
+
+	/* Process video data. */
+	ret = uvc_video_encode_data(video, buf, mem, len);
+	len -= ret;
+
+	req->length = video->req_size - len;
+
+	if (buf->bytesused == video->queue.buf_used ||
+			video->queue.flags & UVC_QUEUE_DROP_INCOMPLETE) {
+		video->queue.buf_used = 0;
+		buf->state = UVC_BUF_STATE_DONE;
+		list_del(&buf->queue);
+		video->fid ^= UVC_STREAM_FID;
+		ureq->last_buf = buf;
+	}
+}
+
+/* --------------------------------------------------------------------------
+ * Request handling
+ */
+
+static int uvcg_video_ep_queue(struct uvc_video *video, struct usb_request *req)
+{
+	int ret;
+
+	ret = usb_ep_queue(video->ep, req, GFP_ATOMIC);
+	if (ret < 0) {
+		uvcg_err(&video->uvc->func, "Failed to queue request (%d).\n",
+			 ret);
+
+		/* If the endpoint is disabled the descriptor may be NULL. */
+		if (video->ep->desc) {
+			/* Isochronous endpoints can't be halted. */
+			if (usb_endpoint_xfer_bulk(video->ep->desc))
+				usb_ep_set_halt(video->ep);
+		}
+	}
+
+	return ret;
+}
+
+static void
+uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct uvc_request *ureq = req->context;
+	struct uvc_video *video = ureq->video;
+	struct uvc_video_queue *queue = &video->queue;
+	struct uvc_device *uvc = video->uvc;
+	unsigned long flags;
+
+	switch (req->status) {
+	case 0:
+		break;
+
+	case -EXDEV:
+		uvcg_dbg(&video->uvc->func, "VS request missed xfer.\n");
+		queue->flags |= UVC_QUEUE_DROP_INCOMPLETE;
+		break;
+
+	case -ESHUTDOWN:	/* disconnect from host. */
+		uvcg_dbg(&video->uvc->func, "VS request cancelled.\n");
+		uvcg_queue_cancel(queue, 1);
+		break;
+
+	default:
+		uvcg_warn(&video->uvc->func,
+			  "VS request completed with status %d.\n",
+			  req->status);
+		uvcg_queue_cancel(queue, 0);
+	}
+
+	if (ureq->last_buf) {
+		uvcg_complete_buffer(&video->queue, ureq->last_buf);
+		ureq->last_buf = NULL;
+	}
+
+	spin_lock_irqsave(&video->req_lock, flags);
+	list_add_tail(&req->list, &video->req_free);
+	spin_unlock_irqrestore(&video->req_lock, flags);
+
+	if (uvc->state == UVC_STATE_STREAMING)
+		queue_work(video->async_wq, &video->pump);
+}
+
+static int
+uvc_video_free_requests(struct uvc_video *video)
+{
+	unsigned int i;
+
+	if (video->ureq) {
+		for (i = 0; i < video->uvc_num_requests; ++i) {
+			sg_free_table(&video->ureq[i].sgt);
+
+			if (video->ureq[i].req) {
+				usb_ep_free_request(video->ep, video->ureq[i].req);
+				video->ureq[i].req = NULL;
+			}
+
+			if (video->ureq[i].req_buffer) {
+				kfree(video->ureq[i].req_buffer);
+				video->ureq[i].req_buffer = NULL;
+			}
+		}
+
+		kfree(video->ureq);
+		video->ureq = NULL;
+	}
+
+	INIT_LIST_HEAD(&video->req_free);
+	video->req_size = 0;
+	return 0;
+}
+
+static int
+uvc_video_alloc_requests(struct uvc_video *video)
+{
+	unsigned int req_size;
+	unsigned int i;
+	int ret = -ENOMEM;
+
+	BUG_ON(video->req_size);
+
+	req_size = video->ep->maxpacket
+		 * max_t(unsigned int, video->ep->maxburst, 1)
+		 * (video->ep->mult);
+
+	video->ureq = kcalloc(video->uvc_num_requests, sizeof(struct uvc_request), GFP_KERNEL);
+	if (video->ureq == NULL)
+		return -ENOMEM;
+
+	for (i = 0; i < video->uvc_num_requests; ++i) {
+		video->ureq[i].req_buffer = kmalloc(req_size, GFP_KERNEL);
+		if (video->ureq[i].req_buffer == NULL)
+			goto error;
+
+		video->ureq[i].req = usb_ep_alloc_request(video->ep, GFP_KERNEL);
+		if (video->ureq[i].req == NULL)
+			goto error;
+
+		video->ureq[i].req->buf = video->ureq[i].req_buffer;
+		video->ureq[i].req->length = 0;
+		video->ureq[i].req->complete = uvc_video_complete;
+		video->ureq[i].req->context = &video->ureq[i];
+		video->ureq[i].video = video;
+		video->ureq[i].last_buf = NULL;
+
+		list_add_tail(&video->ureq[i].req->list, &video->req_free);
+		/* req_size/PAGE_SIZE + 1 for overruns and + 1 for header */
+		sg_alloc_table(&video->ureq[i].sgt,
+			       DIV_ROUND_UP(req_size - UVCG_REQUEST_HEADER_LEN,
+					    PAGE_SIZE) + 2, GFP_KERNEL);
+	}
+
+	video->req_size = req_size;
+
+	return 0;
+
+error:
+	uvc_video_free_requests(video);
+	return ret;
+}
+
+/* --------------------------------------------------------------------------
+ * Video streaming
+ */
+
+/*
+ * uvcg_video_pump - Pump video data into the USB requests
+ *
+ * This function fills the available USB requests (listed in req_free) with
+ * video data from the queued buffers.
+ */
+static void uvcg_video_pump(struct work_struct *work)
+{
+	struct uvc_video *video = container_of(work, struct uvc_video, pump);
+	struct uvc_video_queue *queue = &video->queue;
+	struct usb_request *req = NULL;
+	struct uvc_buffer *buf;
+	unsigned long flags;
+	int ret;
+	bool buf_int;
+	/* video->max_payload_size is only set when using bulk transfer */
+	bool is_bulk = video->max_payload_size;
+
+	while (video->ep->enabled) {
+		/*
+		 * Retrieve the first available USB request, protected by the
+		 * request lock.
+		 */
+		spin_lock_irqsave(&video->req_lock, flags);
+		if (list_empty(&video->req_free)) {
+			spin_unlock_irqrestore(&video->req_lock, flags);
+			return;
+		}
+		req = list_first_entry(&video->req_free, struct usb_request,
+					list);
+		list_del(&req->list);
+		spin_unlock_irqrestore(&video->req_lock, flags);
+
+		/*
+		 * Retrieve the first available video buffer and fill the
+		 * request, protected by the video queue irqlock.
+		 */
+		spin_lock_irqsave(&queue->irqlock, flags);
+		buf = uvcg_queue_head(queue);
+
+		if (buf != NULL) {
+			video->encode(req, video, buf);
+			/* Always interrupt for the last request of a video buffer */
+			buf_int = buf->state == UVC_BUF_STATE_DONE;
+		} else if (!(queue->flags & UVC_QUEUE_DISCONNECTED) && !is_bulk) {
+			/*
+			 * No video buffer available; the queue is still connected and
+			 * we're traferring over ISOC. Queue a 0 length request to
+			 * prevent missed ISOC transfers.
+			 */
+			req->length = 0;
+			buf_int = false;
+		} else {
+			/*
+			 * Either queue has been disconnected or no video buffer
+			 * available to bulk transfer. Either way, stop processing
+			 * further.
+			 */
+			spin_unlock_irqrestore(&queue->irqlock, flags);
+			break;
+		}
+
+		/*
+		 * With usb3 we have more requests. This will decrease the
+		 * interrupt load to a quarter but also catches the corner
+		 * cases, which needs to be handled.
+		 */
+		if (list_empty(&video->req_free) || buf_int ||
+		    !(video->req_int_count %
+		       DIV_ROUND_UP(video->uvc_num_requests, 4))) {
+			video->req_int_count = 0;
+			req->no_interrupt = 0;
+		} else {
+			req->no_interrupt = 1;
+		}
+
+		/* Queue the USB request */
+		ret = uvcg_video_ep_queue(video, req);
+		spin_unlock_irqrestore(&queue->irqlock, flags);
+
+		if (ret < 0) {
+			uvcg_queue_cancel(queue, 0);
+			break;
+		}
+
+		/* Endpoint now owns the request */
+		req = NULL;
+		video->req_int_count++;
+	}
+
+	if (!req)
+		return;
+
+	spin_lock_irqsave(&video->req_lock, flags);
+	list_add_tail(&req->list, &video->req_free);
+	spin_unlock_irqrestore(&video->req_lock, flags);
+	return;
+}
+
+/*
+ * Enable or disable the video stream.
+ */
+int uvcg_video_enable(struct uvc_video *video, int enable)
+{
+	unsigned int i;
+	int ret;
+
+	if (video->ep == NULL) {
+		uvcg_info(&video->uvc->func,
+			  "Video enable failed, device is uninitialized.\n");
+		return -ENODEV;
+	}
+
+	if (!enable) {
+		cancel_work_sync(&video->pump);
+		uvcg_queue_cancel(&video->queue, 0);
+
+		for (i = 0; i < video->uvc_num_requests; ++i)
+			if (video->ureq && video->ureq[i].req)
+				usb_ep_dequeue(video->ep, video->ureq[i].req);
+
+		uvc_video_free_requests(video);
+		uvcg_queue_enable(&video->queue, 0);
+		return 0;
+	}
+
+	if ((ret = uvcg_queue_enable(&video->queue, 1)) < 0)
+		return ret;
+
+	if ((ret = uvc_video_alloc_requests(video)) < 0)
+		return ret;
+
+	if (video->max_payload_size) {
+		video->encode = uvc_video_encode_bulk;
+		video->payload_size = 0;
+	} else
+		video->encode = video->queue.use_sg ?
+			uvc_video_encode_isoc_sg : uvc_video_encode_isoc;
+
+	video->req_int_count = 0;
+
+	queue_work(video->async_wq, &video->pump);
+
+	return ret;
+}
+
+/*
+ * Initialize the UVC video stream.
+ */
+int uvcg_video_init(struct uvc_video *video, struct uvc_device *uvc)
+{
+	INIT_LIST_HEAD(&video->req_free);
+	spin_lock_init(&video->req_lock);
+	INIT_WORK(&video->pump, uvcg_video_pump);
+
+	/* Allocate a work queue for asynchronous video pump handler. */
+	video->async_wq = alloc_workqueue("uvcgadget", WQ_UNBOUND | WQ_HIGHPRI, 0);
+	if (!video->async_wq)
+		return -EINVAL;
+
+	video->uvc = uvc;
+	video->fcc = V4L2_PIX_FMT_YUYV;
+	video->bpp = 16;
+	video->width = 320;
+	video->height = 240;
+	video->imagesize = 320 * 240 * 2;
+
+	/* Initialize the video buffers queue. */
+	uvcg_queue_init(&video->queue, uvc->v4l2_dev.dev->parent,
+			V4L2_BUF_TYPE_VIDEO_OUTPUT, &video->mutex);
+	return 0;
+}
diff --git a/drivers/usb/gadget/function/uvc_video.h b/drivers/usb/gadget/function/uvc_video.h
new file mode 100644
index 000000000..03adeefa3
--- /dev/null
+++ b/drivers/usb/gadget/function/uvc_video.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *	uvc_video.h  --  USB Video Class Gadget driver
+ *
+ * Copyright (C) 2009-2010
+ *		Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *		Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+#ifndef __UVC_VIDEO_H__
+#define __UVC_VIDEO_H__
+
+struct uvc_video;
+
+int uvcg_video_enable(struct uvc_video *video, int enable);
+
+int uvcg_video_init(struct uvc_video *video, struct uvc_device *uvc);
+
+#endif /* __UVC_VIDEO_H__ */
diff --git a/drivers/usb/gadget/functions.c b/drivers/usb/gadget/functions.c
new file mode 100644
index 000000000..203361a64
--- /dev/null
+++ b/drivers/usb/gadget/functions.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/err.h>
+
+#include <linux/usb/composite.h>
+
+static LIST_HEAD(func_list);
+static DEFINE_MUTEX(func_lock);
+
+static struct usb_function_instance *try_get_usb_function_instance(const char *name)
+{
+	struct usb_function_driver *fd;
+	struct usb_function_instance *fi;
+
+	fi = ERR_PTR(-ENOENT);
+	mutex_lock(&func_lock);
+	list_for_each_entry(fd, &func_list, list) {
+
+		if (strcmp(name, fd->name))
+			continue;
+
+		if (!try_module_get(fd->mod)) {
+			fi = ERR_PTR(-EBUSY);
+			break;
+		}
+		fi = fd->alloc_inst();
+		if (IS_ERR(fi))
+			module_put(fd->mod);
+		else
+			fi->fd = fd;
+		break;
+	}
+	mutex_unlock(&func_lock);
+	return fi;
+}
+
+struct usb_function_instance *usb_get_function_instance(const char *name)
+{
+	struct usb_function_instance *fi;
+	int ret;
+
+	fi = try_get_usb_function_instance(name);
+	if (!IS_ERR(fi))
+		return fi;
+	ret = PTR_ERR(fi);
+	if (ret != -ENOENT)
+		return fi;
+	ret = request_module("usbfunc:%s", name);
+	if (ret < 0)
+		return ERR_PTR(ret);
+	return try_get_usb_function_instance(name);
+}
+EXPORT_SYMBOL_GPL(usb_get_function_instance);
+
+struct usb_function *usb_get_function(struct usb_function_instance *fi)
+{
+	struct usb_function *f;
+
+	f = fi->fd->alloc_func(fi);
+	if (IS_ERR(f))
+		return f;
+	f->fi = fi;
+	return f;
+}
+EXPORT_SYMBOL_GPL(usb_get_function);
+
+void usb_put_function_instance(struct usb_function_instance *fi)
+{
+	struct module *mod;
+
+	if (!fi)
+		return;
+
+	mod = fi->fd->mod;
+	fi->free_func_inst(fi);
+	module_put(mod);
+}
+EXPORT_SYMBOL_GPL(usb_put_function_instance);
+
+void usb_put_function(struct usb_function *f)
+{
+	if (!f)
+		return;
+
+	f->free_func(f);
+}
+EXPORT_SYMBOL_GPL(usb_put_function);
+
+int usb_function_register(struct usb_function_driver *newf)
+{
+	struct usb_function_driver *fd;
+	int ret;
+
+	ret = -EEXIST;
+
+	mutex_lock(&func_lock);
+	list_for_each_entry(fd, &func_list, list) {
+		if (!strcmp(fd->name, newf->name))
+			goto out;
+	}
+	ret = 0;
+	list_add_tail(&newf->list, &func_list);
+out:
+	mutex_unlock(&func_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_function_register);
+
+void usb_function_unregister(struct usb_function_driver *fd)
+{
+	mutex_lock(&func_lock);
+	list_del(&fd->list);
+	mutex_unlock(&func_lock);
+}
+EXPORT_SYMBOL_GPL(usb_function_unregister);
diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig
new file mode 100644
index 000000000..0a7b382fb
--- /dev/null
+++ b/drivers/usb/gadget/legacy/Kconfig
@@ -0,0 +1,532 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Gadget support on a system involves
+#    (a) a peripheral controller, and
+#    (b) the gadget driver using it.
+#
+# NOTE:  Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
+#
+#  - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
+#  - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
+#  - Some systems have both kinds of controllers.
+#
+# With help from a special transceiver and a "Mini-AB" jack, systems with
+# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
+#
+# A Linux "Gadget Driver" talks to the USB Peripheral Controller
+# driver through the abstract "gadget" API.  Some other operating
+# systems call these "client" drivers, of which "class drivers"
+# are a subset (implementing a USB device class specification).
+# A gadget driver implements one or more USB functions using
+# the peripheral hardware.
+#
+# Gadget drivers are hardware-neutral, or "platform independent",
+# except that they sometimes must understand quirks or limitations
+# of the particular controllers they work with.  For example, when
+# a controller doesn't support alternate configurations or provide
+# enough of the right types of endpoints, the gadget driver might
+# not be able work with that controller, or might need to implement
+# a less common variant of a device class protocol.
+#
+# The available choices each represent a single precomposed USB
+# gadget configuration. In the device model, each option contains
+# both the device instantiation as a child for a USB gadget
+# controller, and the relevant drivers for each function declared
+# by the device.
+
+menu "USB Gadget precomposed configurations"
+
+config USB_ZERO
+	tristate "Gadget Zero (DEVELOPMENT)"
+	select USB_LIBCOMPOSITE
+	select USB_F_SS_LB
+	help
+	  Gadget Zero is a two-configuration device.  It either sinks and
+	  sources bulk data; or it loops back a configurable number of
+	  transfers.  It also implements control requests, for "chapter 9"
+	  conformance.  The driver needs only two bulk-capable endpoints, so
+	  it can work on top of most device-side usb controllers.  It's
+	  useful for testing, and is also a working example showing how
+	  USB "gadget drivers" can be written.
+
+	  Make this be the first driver you try using on top of any new
+	  USB peripheral controller driver.  Then you can use host-side
+	  test software, like the "usbtest" driver, to put your hardware
+	  and its driver through a basic set of functional tests.
+
+	  Gadget Zero also works with the host-side "usb-skeleton" driver,
+	  and with many kinds of host-side test software.  You may need
+	  to tweak product and vendor IDs before host software knows about
+	  this device, and arrange to select an appropriate configuration.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_zero".
+
+config USB_ZERO_HNPTEST
+	bool "HNP Test Device"
+	depends on USB_ZERO && USB_OTG
+	help
+	  You can configure this device to enumerate using the device
+	  identifiers of the USB-OTG test device.  That means that when
+	  this gadget connects to another OTG device, with this one using
+	  the "B-Peripheral" role, that device will use HNP to let this
+	  one serve as the USB host instead (in the "B-Host" role).
+
+config USB_AUDIO
+	tristate "Audio Gadget"
+	depends on SND
+	select USB_LIBCOMPOSITE
+	select SND_PCM
+	select USB_F_UAC1 if (GADGET_UAC1 && !GADGET_UAC1_LEGACY)
+	select USB_F_UAC1_LEGACY if (GADGET_UAC1 && GADGET_UAC1_LEGACY)
+	select USB_F_UAC2 if !GADGET_UAC1
+	select USB_U_AUDIO if (USB_F_UAC2 || USB_F_UAC1)
+	help
+	  This Gadget Audio driver is compatible with USB Audio Class
+	  specification 2.0. It implements 1 AudioControl interface,
+	  1 AudioStreaming Interface each for USB-OUT and USB-IN.
+	  Number of channels, sample rate and sample size can be
+	  specified as module parameters.
+	  This driver doesn't expect any real Audio codec to be present
+	  on the device - the audio streams are simply sinked to and
+	  sourced from a virtual ALSA sound card created. The user-space
+	  application may choose to do whatever it wants with the data
+	  received from the USB Host and choose to provide whatever it
+	  wants as audio data to the USB Host.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_audio".
+
+config GADGET_UAC1
+	bool "UAC 1.0"
+	depends on USB_AUDIO
+	help
+	  If you instead want older USB Audio Class specification 1.0 support
+	  with similar driver capabilities.
+
+config GADGET_UAC1_LEGACY
+	bool "UAC 1.0 (Legacy)"
+	depends on GADGET_UAC1
+	help
+	  If you instead want legacy UAC Spec-1.0 driver that also has audio
+	  paths hardwired to the Audio codec chip on-board and doesn't work
+	  without one.
+
+config USB_ETH
+	tristate "Ethernet Gadget (with CDC Ethernet support)"
+	depends on NET
+	select USB_LIBCOMPOSITE
+	select USB_U_ETHER
+	select USB_F_ECM
+	select USB_F_SUBSET
+	select CRC32
+	help
+	  This driver implements Ethernet style communication, in one of
+	  several ways:
+
+	   - The "Communication Device Class" (CDC) Ethernet Control Model.
+	     That protocol is often avoided with pure Ethernet adapters, in
+	     favor of simpler vendor-specific hardware, but is widely
+	     supported by firmware for smart network devices.
+
+	   - On hardware can't implement that protocol, a simple CDC subset
+	     is used, placing fewer demands on USB.
+
+	   - CDC Ethernet Emulation Model (EEM) is a newer standard that has
+	     a simpler interface that can be used by more USB hardware.
+
+	  RNDIS support is an additional option, more demanding than subset.
+
+	  Within the USB device, this gadget driver exposes a network device
+	  "usbX", where X depends on what other networking devices you have.
+	  Treat it like a two-node Ethernet link:  host, and gadget.
+
+	  The Linux-USB host-side "usbnet" driver interoperates with this
+	  driver, so that deep I/O queues can be supported.  On 2.4 kernels,
+	  use "CDCEther" instead, if you're using the CDC option. That CDC
+	  mode should also interoperate with standard CDC Ethernet class
+	  drivers on other host operating systems.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_ether".
+
+config USB_ETH_RNDIS
+	bool "RNDIS support"
+	depends on USB_ETH
+	select USB_LIBCOMPOSITE
+	select USB_F_RNDIS
+	default y
+	help
+	   Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
+	   and Microsoft provides redistributable binary RNDIS drivers for
+	   older versions of Windows.
+
+	   If you say "y" here, the Ethernet gadget driver will try to provide
+	   a second device configuration, supporting RNDIS to talk to such
+	   Microsoft USB hosts.
+
+	   To make MS-Windows work with this, use Documentation/usb/linux.inf
+	   as the "driver info file".  For versions of MS-Windows older than
+	   XP, you'll need to download drivers from Microsoft's website; a URL
+	   is given in comments found in that info file.
+
+config USB_ETH_EEM
+	bool "Ethernet Emulation Model (EEM) support"
+	depends on USB_ETH
+	select USB_LIBCOMPOSITE
+	select USB_F_EEM
+	help
+	  CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
+	  and therefore can be supported by more hardware.  Technically ECM and
+	  EEM are designed for different applications.  The ECM model extends
+	  the network interface to the target (e.g. a USB cable modem), and the
+	  EEM model is for mobile devices to communicate with hosts using
+	  ethernet over USB.  For Linux gadgets, however, the interface with
+	  the host is the same (a usbX device), so the differences are minimal.
+
+	  If you say "y" here, the Ethernet gadget driver will use the EEM
+	  protocol rather than ECM.  If unsure, say "n".
+
+config USB_G_NCM
+	tristate "Network Control Model (NCM) support"
+	depends on NET
+	select USB_LIBCOMPOSITE
+	select USB_U_ETHER
+	select USB_F_NCM
+	select CRC32
+	help
+	  This driver implements USB CDC NCM subclass standard. NCM is
+	  an advanced protocol for Ethernet encapsulation, allows grouping
+	  of several ethernet frames into one USB transfer and different
+	  alignment possibilities.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_ncm".
+
+config USB_GADGETFS
+	tristate "Gadget Filesystem"
+	help
+	  This driver provides a filesystem based API that lets user mode
+	  programs implement a single-configuration USB device, including
+	  endpoint I/O and control requests that don't relate to enumeration.
+	  All endpoints, transfer speeds, and transfer types supported by
+	  the hardware are available, through read() and write() calls.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "gadgetfs".
+
+config USB_FUNCTIONFS
+	tristate "Function Filesystem"
+	select USB_LIBCOMPOSITE
+	select USB_F_FS
+	select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
+	help
+	  The Function Filesystem (FunctionFS) lets one create USB
+	  composite functions in user space in the same way GadgetFS
+	  lets one create USB gadgets in user space.  This allows creation
+	  of composite gadgets such that some of the functions are
+	  implemented in kernel space (for instance Ethernet, serial or
+	  mass storage) and other are implemented in user space.
+
+	  If you say "y" or "m" here you will be able what kind of
+	  configurations the gadget will provide.
+
+	  Say "y" to link the driver statically, or "m" to build
+	  a dynamically linked module called "g_ffs".
+
+config USB_FUNCTIONFS_ETH
+	bool "Include configuration with CDC ECM (Ethernet)"
+	depends on USB_FUNCTIONFS && NET
+	select USB_U_ETHER
+	select USB_F_ECM
+	select USB_F_SUBSET
+	help
+	  Include a configuration with CDC ECM function (Ethernet) and the
+	  Function Filesystem.
+
+config USB_FUNCTIONFS_RNDIS
+	bool "Include configuration with RNDIS (Ethernet)"
+	depends on USB_FUNCTIONFS && NET
+	select USB_U_ETHER
+	select USB_F_RNDIS
+	help
+	  Include a configuration with RNDIS function (Ethernet) and the Filesystem.
+
+config USB_FUNCTIONFS_GENERIC
+	bool "Include 'pure' configuration"
+	depends on USB_FUNCTIONFS
+	help
+	  Include a configuration with the Function Filesystem alone with
+	  no Ethernet interface.
+
+config USB_MASS_STORAGE
+	tristate "Mass Storage Gadget"
+	depends on BLOCK
+	select USB_LIBCOMPOSITE
+	select USB_F_MASS_STORAGE
+	help
+	  The Mass Storage Gadget acts as a USB Mass Storage disk drive.
+	  As its storage repository it can use a regular file or a block
+	  device (in much the same way as the "loop" device driver),
+	  specified as a module parameter or sysfs option.
+
+	  This driver is a replacement for now removed File-backed
+	  Storage Gadget (g_file_storage).
+
+	  Say "y" to link the driver statically, or "m" to build
+	  a dynamically linked module called "g_mass_storage".
+
+config USB_GADGET_TARGET
+	tristate "USB Gadget Target Fabric Module"
+	depends on TARGET_CORE
+	select USB_LIBCOMPOSITE
+	select USB_F_TCM
+	help
+	  This fabric is an USB gadget. Two USB protocols are supported that is
+	  BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is
+	  advertised on alternative interface 0 (primary) and UAS is on
+	  alternative interface 1. Both protocols can work on USB2.0 and USB3.0.
+	  UAS utilizes the USB 3.0 feature called streams support.
+
+config USB_G_SERIAL
+	tristate "Serial Gadget (with CDC ACM and CDC OBEX support)"
+	depends on TTY
+	select USB_U_SERIAL
+	select USB_F_ACM
+	select USB_F_SERIAL
+	select USB_F_OBEX
+	select USB_LIBCOMPOSITE
+	help
+	  The Serial Gadget talks to the Linux-USB generic serial driver.
+	  This driver supports a CDC-ACM module option, which can be used
+	  to interoperate with MS-Windows hosts or with the Linux-USB
+	  "cdc-acm" driver.
+
+	  This driver also supports a CDC-OBEX option.  You will need a
+	  user space OBEX server talking to /dev/ttyGS*, since the kernel
+	  itself doesn't implement the OBEX protocol.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_serial".
+
+	  For more information, see Documentation/usb/gadget_serial.rst
+	  which includes instructions and a "driver info file" needed to
+	  make MS-Windows work with CDC ACM.
+
+config USB_MIDI_GADGET
+	tristate "MIDI Gadget"
+	depends on SND
+	select USB_LIBCOMPOSITE
+	select SND_RAWMIDI
+	select USB_F_MIDI
+	help
+	  The MIDI Gadget acts as a USB Audio device, with one MIDI
+	  input and one MIDI output. These MIDI jacks appear as
+	  a sound "card" in the ALSA sound system. Other MIDI
+	  connections can then be made on the gadget system, using
+	  ALSA's aconnect utility etc.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_midi".
+
+config USB_G_PRINTER
+	tristate "Printer Gadget"
+	select USB_LIBCOMPOSITE
+	select USB_F_PRINTER
+	help
+	  The Printer Gadget channels data between the USB host and a
+	  userspace program driving the print engine. The user space
+	  program reads and writes the device file /dev/g_printer to
+	  receive or send printer data. It can use ioctl calls to
+	  the device file to get or set printer status.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_printer".
+
+	  For more information, see Documentation/usb/gadget_printer.rst
+	  which includes sample code for accessing the device file.
+
+if TTY
+
+config USB_CDC_COMPOSITE
+	tristate "CDC Composite Device (Ethernet and ACM)"
+	depends on NET
+	select USB_LIBCOMPOSITE
+	select USB_U_SERIAL
+	select USB_U_ETHER
+	select USB_F_ACM
+	select USB_F_ECM
+	help
+	  This driver provides two functions in one configuration:
+	  a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link.
+
+	  This driver requires four bulk and two interrupt endpoints,
+	  plus the ability to handle altsettings.  Not all peripheral
+	  controllers are that capable.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module.
+
+config USB_G_NOKIA
+	tristate "Nokia composite gadget"
+	depends on PHONET
+	depends on BLOCK
+	select USB_LIBCOMPOSITE
+	select USB_U_SERIAL
+	select USB_U_ETHER
+	select USB_F_ACM
+	select USB_F_OBEX
+	select USB_F_PHONET
+	select USB_F_ECM
+	select USB_F_MASS_STORAGE
+	help
+	  The Nokia composite gadget provides support for acm, obex
+	  and phonet in only one composite gadget driver.
+
+	  It's only really useful for N900 hardware. If you're building
+	  a kernel for N900, say Y or M here. If unsure, say N.
+
+config USB_G_ACM_MS
+	tristate "CDC Composite Device (ACM and mass storage)"
+	depends on BLOCK
+	select USB_LIBCOMPOSITE
+	select USB_U_SERIAL
+	select USB_F_ACM
+	select USB_F_MASS_STORAGE
+	help
+	  This driver provides two functions in one configuration:
+	  a mass storage, and a CDC ACM (serial port) link.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_acm_ms".
+
+config USB_G_MULTI
+	tristate "Multifunction Composite Gadget"
+	depends on BLOCK && NET
+	select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS
+	select USB_LIBCOMPOSITE
+	select USB_U_SERIAL
+	select USB_U_ETHER
+	select USB_F_ACM
+	select USB_F_MASS_STORAGE
+	help
+	  The Multifunction Composite Gadget provides Ethernet (RNDIS
+	  and/or CDC Ethernet), mass storage and ACM serial link
+	  interfaces.
+
+	  You will be asked to choose which of the two configurations is
+	  to be available in the gadget.  At least one configuration must
+	  be chosen to make the gadget usable.  Selecting more than one
+	  configuration will prevent Windows from automatically detecting
+	  the gadget as a composite gadget, so an INF file will be needed to
+	  use the gadget.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_multi".
+
+config USB_G_MULTI_RNDIS
+	bool "RNDIS + CDC Serial + Storage configuration"
+	depends on USB_G_MULTI
+	select USB_F_RNDIS
+	default y
+	help
+	  This option enables a configuration with RNDIS, CDC Serial and
+	  Mass Storage functions available in the Multifunction Composite
+	  Gadget.  This is the configuration dedicated for Windows since RNDIS
+	  is Microsoft's protocol.
+
+	  If unsure, say "y".
+
+config USB_G_MULTI_CDC
+	bool "CDC Ethernet + CDC Serial + Storage configuration"
+	depends on USB_G_MULTI
+	select USB_F_ECM
+	help
+	  This option enables a configuration with CDC Ethernet (ECM), CDC
+	  Serial and Mass Storage functions available in the Multifunction
+	  Composite Gadget.
+
+	  If unsure, say "y".
+
+endif # TTY
+
+config USB_G_HID
+	tristate "HID Gadget"
+	select USB_LIBCOMPOSITE
+	select USB_F_HID
+	help
+	  The HID gadget driver provides generic emulation of USB
+	  Human Interface Devices (HID).
+
+	  For more information, see Documentation/usb/gadget_hid.rst which
+	  includes sample code for accessing the device files.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_hid".
+
+# Standalone / single function gadgets
+config USB_G_DBGP
+	tristate "EHCI Debug Device Gadget"
+	depends on TTY
+	select USB_LIBCOMPOSITE
+	help
+	  This gadget emulates an EHCI Debug device. This is useful when you want
+	  to interact with an EHCI Debug Port.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_dbgp".
+
+if USB_G_DBGP
+choice
+	prompt "EHCI Debug Device mode"
+	default USB_G_DBGP_SERIAL
+
+config USB_G_DBGP_PRINTK
+	depends on USB_G_DBGP
+	bool "printk"
+	help
+	  Directly printk() received data. No interaction.
+
+config USB_G_DBGP_SERIAL
+	depends on USB_G_DBGP
+	select USB_U_SERIAL
+	bool "serial"
+	help
+	  Userland can interact using /dev/ttyGSxxx.
+endchoice
+endif
+
+# put drivers that need isochronous transfer support (for audio
+# or video class gadget drivers), or specific hardware, here.
+config USB_G_WEBCAM
+	tristate "USB Webcam Gadget"
+	depends on VIDEO_DEV
+	select USB_LIBCOMPOSITE
+	select VIDEOBUF2_DMA_SG
+	select VIDEOBUF2_VMALLOC
+	select USB_F_UVC
+	help
+	  The Webcam Gadget acts as a composite USB Audio and Video Class
+	  device. It provides a userspace API to process UVC control requests
+	  and stream video data to the host.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_webcam".
+
+config USB_RAW_GADGET
+	tristate "USB Raw Gadget"
+	help
+	  USB Raw Gadget is a gadget driver that gives userspace low-level
+	  control over the gadget's communication process.
+
+	  Like any other gadget driver, Raw Gadget implements USB devices via
+	  the USB gadget API. Unlike most gadget drivers, Raw Gadget does not
+	  implement any concrete USB functions itself but requires userspace
+	  to do that.
+
+	  See Documentation/usb/raw-gadget.rst for details.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "raw_gadget".
+
+endmenu
diff --git a/drivers/usb/gadget/legacy/Makefile b/drivers/usb/gadget/legacy/Makefile
new file mode 100644
index 000000000..4d864bf82
--- /dev/null
+++ b/drivers/usb/gadget/legacy/Makefile
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB gadget drivers
+#
+
+ccflags-y			:= -I$(srctree)/drivers/usb/gadget/
+ccflags-y			+= -I$(srctree)/drivers/usb/gadget/udc/
+ccflags-y			+= -I$(srctree)/drivers/usb/gadget/function/
+
+g_zero-y			:= zero.o
+g_audio-y			:= audio.o
+g_ether-y			:= ether.o
+g_serial-y			:= serial.o
+g_midi-y			:= gmidi.o
+gadgetfs-y			:= inode.o
+g_mass_storage-y		:= mass_storage.o
+g_printer-y			:= printer.o
+g_cdc-y				:= cdc2.o
+g_multi-y			:= multi.o
+g_hid-y				:= hid.o
+g_dbgp-y			:= dbgp.o
+g_nokia-y			:= nokia.o
+g_webcam-y			:= webcam.o
+g_ncm-y				:= ncm.o
+g_acm_ms-y			:= acm_ms.o
+g_tcm_usb_gadget-y		:= tcm_usb_gadget.o
+
+obj-$(CONFIG_USB_ZERO)		+= g_zero.o
+obj-$(CONFIG_USB_AUDIO)		+= g_audio.o
+obj-$(CONFIG_USB_ETH)		+= g_ether.o
+obj-$(CONFIG_USB_GADGETFS)	+= gadgetfs.o
+obj-$(CONFIG_USB_FUNCTIONFS)	+= g_ffs.o
+obj-$(CONFIG_USB_MASS_STORAGE)	+= g_mass_storage.o
+obj-$(CONFIG_USB_G_SERIAL)	+= g_serial.o
+obj-$(CONFIG_USB_G_PRINTER)	+= g_printer.o
+obj-$(CONFIG_USB_MIDI_GADGET)	+= g_midi.o
+obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o
+obj-$(CONFIG_USB_G_HID)		+= g_hid.o
+obj-$(CONFIG_USB_G_DBGP)	+= g_dbgp.o
+obj-$(CONFIG_USB_G_MULTI)	+= g_multi.o
+obj-$(CONFIG_USB_G_NOKIA)	+= g_nokia.o
+obj-$(CONFIG_USB_G_WEBCAM)	+= g_webcam.o
+obj-$(CONFIG_USB_G_NCM)		+= g_ncm.o
+obj-$(CONFIG_USB_G_ACM_MS)	+= g_acm_ms.o
+obj-$(CONFIG_USB_GADGET_TARGET)	+= tcm_usb_gadget.o
+obj-$(CONFIG_USB_RAW_GADGET)	+= raw_gadget.o
diff --git a/drivers/usb/gadget/legacy/acm_ms.c b/drivers/usb/gadget/legacy/acm_ms.c
new file mode 100644
index 000000000..e8033e5f0
--- /dev/null
+++ b/drivers/usb/gadget/legacy/acm_ms.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * acm_ms.c -- Composite driver, with ACM and mass storage support
+ *
+ * Copyright (C) 2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: David Brownell
+ * Modified: Klaus Schwarzkopf <schwarzkopf@sensortherm.de>
+ *
+ * Heavily based on multi.c and cdc2.c
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "u_serial.h"
+
+#define DRIVER_DESC		"Composite Gadget (ACM + MS)"
+#define DRIVER_VERSION		"2011/10/10"
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
+#define ACM_MS_VENDOR_NUM	0x1d6b	/* Linux Foundation */
+#define ACM_MS_PRODUCT_NUM	0x0106	/* Composite Gadget: ACM + MS*/
+
+#include "f_mass_storage.h"
+
+/*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	/* .bcdUSB = DYNAMIC */
+
+	.bDeviceClass =		USB_CLASS_MISC /* 0xEF */,
+	.bDeviceSubClass =	2,
+	.bDeviceProtocol =	1,
+
+	/* .bMaxPacketSize0 = f(hardware) */
+
+	/* Vendor and product id can be overridden by module parameters.  */
+	.idVendor =		cpu_to_le16(ACM_MS_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(ACM_MS_PRODUCT_NUM),
+	/* .bcdDevice = f(hardware) */
+	/* .iManufacturer = DYNAMIC */
+	/* .iProduct = DYNAMIC */
+	/* NO SERIAL NUMBER */
+	/*.bNumConfigurations =	DYNAMIC*/
+};
+
+static const struct usb_descriptor_header *otg_desc[2];
+
+/* string IDs are assigned dynamically */
+static struct usb_string strings_dev[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+/****************************** Configurations ******************************/
+
+static struct fsg_module_parameters fsg_mod_data = { .stall = 1 };
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
+
+#else
+
+/*
+ * Number of buffers we will use.
+ * 2 is usually enough for good buffering pipeline
+ */
+#define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
+
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
+
+FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
+
+/*-------------------------------------------------------------------------*/
+static struct usb_function *f_acm;
+static struct usb_function_instance *f_acm_inst;
+
+static struct usb_function_instance *fi_msg;
+static struct usb_function *f_msg;
+
+/*
+ * We _always_ have both ACM and mass storage functions.
+ */
+static int acm_ms_do_config(struct usb_configuration *c)
+{
+	int	status;
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	f_acm = usb_get_function(f_acm_inst);
+	if (IS_ERR(f_acm))
+		return PTR_ERR(f_acm);
+
+	f_msg = usb_get_function(fi_msg);
+	if (IS_ERR(f_msg)) {
+		status = PTR_ERR(f_msg);
+		goto put_acm;
+	}
+
+	status = usb_add_function(c, f_acm);
+	if (status < 0)
+		goto put_msg;
+
+	status = usb_add_function(c, f_msg);
+	if (status)
+		goto remove_acm;
+
+	return 0;
+remove_acm:
+	usb_remove_function(c, f_acm);
+put_msg:
+	usb_put_function(f_msg);
+put_acm:
+	usb_put_function(f_acm);
+	return status;
+}
+
+static struct usb_configuration acm_ms_config_driver = {
+	.label			= DRIVER_DESC,
+	.bConfigurationValue	= 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int acm_ms_bind(struct usb_composite_dev *cdev)
+{
+	struct usb_gadget	*gadget = cdev->gadget;
+	struct fsg_opts		*opts;
+	struct fsg_config	config;
+	int			status;
+
+	f_acm_inst = usb_get_function_instance("acm");
+	if (IS_ERR(f_acm_inst))
+		return PTR_ERR(f_acm_inst);
+
+	fi_msg = usb_get_function_instance("mass_storage");
+	if (IS_ERR(fi_msg)) {
+		status = PTR_ERR(fi_msg);
+		goto fail_get_msg;
+	}
+
+	/* set up mass storage function */
+	fsg_config_from_params(&config, &fsg_mod_data, fsg_num_buffers);
+	opts = fsg_opts_from_func_inst(fi_msg);
+
+	opts->no_configfs = true;
+	status = fsg_common_set_num_buffers(opts->common, fsg_num_buffers);
+	if (status)
+		goto fail;
+
+	status = fsg_common_set_cdev(opts->common, cdev, config.can_stall);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_sysfs(opts->common, true);
+	status = fsg_common_create_luns(opts->common, &config);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_inquiry_string(opts->common, config.vendor_name,
+				      config.product_name);
+	/*
+	 * Allocate string descriptor numbers ... note that string
+	 * contents can be overridden by the composite_dev glue.
+	 */
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (status < 0)
+		goto fail_string_ids;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+
+	if (gadget_is_otg(gadget) && !otg_desc[0]) {
+		struct usb_descriptor_header *usb_desc;
+
+		usb_desc = usb_otg_descriptor_alloc(gadget);
+		if (!usb_desc) {
+			status = -ENOMEM;
+			goto fail_string_ids;
+		}
+		usb_otg_descriptor_init(gadget, usb_desc);
+		otg_desc[0] = usb_desc;
+		otg_desc[1] = NULL;
+	}
+
+	/* register our configuration */
+	status = usb_add_config(cdev, &acm_ms_config_driver, acm_ms_do_config);
+	if (status < 0)
+		goto fail_otg_desc;
+
+	usb_composite_overwrite_options(cdev, &coverwrite);
+	dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n",
+			DRIVER_DESC);
+	return 0;
+
+	/* error recovery */
+fail_otg_desc:
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+fail_string_ids:
+	fsg_common_remove_luns(opts->common);
+fail_set_cdev:
+	fsg_common_free_buffers(opts->common);
+fail:
+	usb_put_function_instance(fi_msg);
+fail_get_msg:
+	usb_put_function_instance(f_acm_inst);
+	return status;
+}
+
+static int acm_ms_unbind(struct usb_composite_dev *cdev)
+{
+	usb_put_function(f_msg);
+	usb_put_function_instance(fi_msg);
+	usb_put_function(f_acm);
+	usb_put_function_instance(f_acm_inst);
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+
+	return 0;
+}
+
+static struct usb_composite_driver acm_ms_driver = {
+	.name		= "g_acm_ms",
+	.dev		= &device_desc,
+	.max_speed	= USB_SPEED_SUPER,
+	.strings	= dev_strings,
+	.bind		= acm_ms_bind,
+	.unbind		= acm_ms_unbind,
+};
+
+module_usb_composite_driver(acm_ms_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Klaus Schwarzkopf <schwarzkopf@sensortherm.de>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/gadget/legacy/audio.c b/drivers/usb/gadget/legacy/audio.c
new file mode 100644
index 000000000..76ea6decf
--- /dev/null
+++ b/drivers/usb/gadget/legacy/audio.c
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * audio.c -- Audio gadget driver
+ *
+ * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ * Copyright (C) 2008 Analog Devices, Inc
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb/composite.h>
+
+#define DRIVER_DESC		"Linux USB Audio Gadget"
+#define DRIVER_VERSION		"Feb 2, 2012"
+
+USB_GADGET_COMPOSITE_OPTIONS();
+
+#ifndef CONFIG_GADGET_UAC1
+#include "u_uac2.h"
+
+/* Playback(USB-IN) Default Stereo - Fl/Fr */
+static int p_chmask = UAC2_DEF_PCHMASK;
+module_param(p_chmask, uint, 0444);
+MODULE_PARM_DESC(p_chmask, "Playback Channel Mask");
+
+/* Playback Default 48 KHz */
+static int p_srates[UAC_MAX_RATES] = {UAC2_DEF_PSRATE};
+static int p_srates_cnt = 1;
+module_param_array_named(p_srate, p_srates, uint, &p_srates_cnt, 0444);
+MODULE_PARM_DESC(p_srate, "Playback Sampling Rates (array)");
+
+/* Playback Default 16bits/sample */
+static int p_ssize = UAC2_DEF_PSSIZE;
+module_param(p_ssize, uint, 0444);
+MODULE_PARM_DESC(p_ssize, "Playback Sample Size(bytes)");
+
+/* Playback bInterval for HS/SS (1-4: fixed, 0: auto) */
+static u8 p_hs_bint = UAC2_DEF_PHSBINT;
+module_param(p_hs_bint, byte, 0444);
+MODULE_PARM_DESC(p_hs_bint,
+		"Playback bInterval for HS/SS (1-4: fixed, 0: auto)");
+
+/* Capture(USB-OUT) Default Stereo - Fl/Fr */
+static int c_chmask = UAC2_DEF_CCHMASK;
+module_param(c_chmask, uint, 0444);
+MODULE_PARM_DESC(c_chmask, "Capture Channel Mask");
+
+/* Capture Default 64 KHz */
+static int c_srates[UAC_MAX_RATES] = {UAC2_DEF_CSRATE};
+static int c_srates_cnt = 1;
+module_param_array_named(c_srate, c_srates, uint, &c_srates_cnt, 0444);
+MODULE_PARM_DESC(c_srate, "Capture Sampling Rates (array)");
+
+/* Capture Default 16bits/sample */
+static int c_ssize = UAC2_DEF_CSSIZE;
+module_param(c_ssize, uint, 0444);
+MODULE_PARM_DESC(c_ssize, "Capture Sample Size(bytes)");
+
+/* capture bInterval for HS/SS (1-4: fixed, 0: auto) */
+static u8 c_hs_bint = UAC2_DEF_CHSBINT;
+module_param(c_hs_bint, byte, 0444);
+MODULE_PARM_DESC(c_hs_bint,
+		"Capture bInterval for HS/SS (1-4: fixed, 0: auto)");
+
+#else
+#ifndef CONFIG_GADGET_UAC1_LEGACY
+#include "u_uac1.h"
+
+/* Playback(USB-IN) Default Stereo - Fl/Fr */
+static int p_chmask = UAC1_DEF_PCHMASK;
+module_param(p_chmask, uint, 0444);
+MODULE_PARM_DESC(p_chmask, "Playback Channel Mask");
+
+/* Playback Default 48 KHz */
+static int p_srates[UAC_MAX_RATES] = {UAC1_DEF_PSRATE};
+static int p_srates_cnt = 1;
+module_param_array_named(p_srate, p_srates, uint, &p_srates_cnt, 0444);
+MODULE_PARM_DESC(p_srate, "Playback Sampling Rates (array)");
+
+/* Playback Default 16bits/sample */
+static int p_ssize = UAC1_DEF_PSSIZE;
+module_param(p_ssize, uint, 0444);
+MODULE_PARM_DESC(p_ssize, "Playback Sample Size(bytes)");
+
+/* Capture(USB-OUT) Default Stereo - Fl/Fr */
+static int c_chmask = UAC1_DEF_CCHMASK;
+module_param(c_chmask, uint, 0444);
+MODULE_PARM_DESC(c_chmask, "Capture Channel Mask");
+
+/* Capture Default 48 KHz */
+static int c_srates[UAC_MAX_RATES] = {UAC1_DEF_CSRATE};
+static int c_srates_cnt = 1;
+module_param_array_named(c_srate, c_srates, uint, &c_srates_cnt, 0444);
+MODULE_PARM_DESC(c_srate, "Capture Sampling Rates (array)");
+
+/* Capture Default 16bits/sample */
+static int c_ssize = UAC1_DEF_CSSIZE;
+module_param(c_ssize, uint, 0444);
+MODULE_PARM_DESC(c_ssize, "Capture Sample Size(bytes)");
+#else /* CONFIG_GADGET_UAC1_LEGACY */
+#include "u_uac1_legacy.h"
+
+static char *fn_play = FILE_PCM_PLAYBACK;
+module_param(fn_play, charp, 0444);
+MODULE_PARM_DESC(fn_play, "Playback PCM device file name");
+
+static char *fn_cap = FILE_PCM_CAPTURE;
+module_param(fn_cap, charp, 0444);
+MODULE_PARM_DESC(fn_cap, "Capture PCM device file name");
+
+static char *fn_cntl = FILE_CONTROL;
+module_param(fn_cntl, charp, 0444);
+MODULE_PARM_DESC(fn_cntl, "Control device file name");
+
+static int req_buf_size = UAC1_OUT_EP_MAX_PACKET_SIZE;
+module_param(req_buf_size, int, 0444);
+MODULE_PARM_DESC(req_buf_size, "ISO OUT endpoint request buffer size");
+
+static int req_count = UAC1_REQ_COUNT;
+module_param(req_count, int, 0444);
+MODULE_PARM_DESC(req_count, "ISO OUT endpoint request count");
+
+static int audio_buf_size = UAC1_AUDIO_BUF_SIZE;
+module_param(audio_buf_size, int, 0444);
+MODULE_PARM_DESC(audio_buf_size, "Audio buffer size");
+#endif /* CONFIG_GADGET_UAC1_LEGACY */
+#endif
+
+/* string IDs are assigned dynamically */
+
+static struct usb_string strings_dev[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language = 0x0409,	/* en-us */
+	.strings = strings_dev,
+};
+
+static struct usb_gadget_strings *audio_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+#ifndef CONFIG_GADGET_UAC1
+static struct usb_function_instance *fi_uac2;
+static struct usb_function *f_uac2;
+#else
+static struct usb_function_instance *fi_uac1;
+static struct usb_function *f_uac1;
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
+
+/* Thanks to Linux Foundation for donating this product ID. */
+#define AUDIO_VENDOR_NUM		0x1d6b	/* Linux Foundation */
+#define AUDIO_PRODUCT_NUM		0x0101	/* Linux-USB Audio Gadget */
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	/* .bcdUSB = DYNAMIC */
+
+#ifdef CONFIG_GADGET_UAC1_LEGACY
+	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
+	.bDeviceSubClass =	0,
+	.bDeviceProtocol =	0,
+#else
+	.bDeviceClass =		USB_CLASS_MISC,
+	.bDeviceSubClass =	0x02,
+	.bDeviceProtocol =	0x01,
+#endif
+	/* .bMaxPacketSize0 = f(hardware) */
+
+	/* Vendor and product id defaults change according to what configs
+	 * we support.  (As does bNumConfigurations.)  These values can
+	 * also be overridden by module parameters.
+	 */
+	.idVendor =		cpu_to_le16(AUDIO_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(AUDIO_PRODUCT_NUM),
+	/* .bcdDevice = f(hardware) */
+	/* .iManufacturer = DYNAMIC */
+	/* .iProduct = DYNAMIC */
+	/* NO SERIAL NUMBER */
+	.bNumConfigurations =	1,
+};
+
+static const struct usb_descriptor_header *otg_desc[2];
+
+/*-------------------------------------------------------------------------*/
+
+static int audio_do_config(struct usb_configuration *c)
+{
+	int status;
+
+	/* FIXME alloc iConfiguration string, set it in c->strings */
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+#ifdef CONFIG_GADGET_UAC1
+	f_uac1 = usb_get_function(fi_uac1);
+	if (IS_ERR(f_uac1)) {
+		status = PTR_ERR(f_uac1);
+		return status;
+	}
+
+	status = usb_add_function(c, f_uac1);
+	if (status < 0) {
+		usb_put_function(f_uac1);
+		return status;
+	}
+#else
+	f_uac2 = usb_get_function(fi_uac2);
+	if (IS_ERR(f_uac2)) {
+		status = PTR_ERR(f_uac2);
+		return status;
+	}
+
+	status = usb_add_function(c, f_uac2);
+	if (status < 0) {
+		usb_put_function(f_uac2);
+		return status;
+	}
+#endif
+
+	return 0;
+}
+
+static struct usb_configuration audio_config_driver = {
+	.label			= DRIVER_DESC,
+	.bConfigurationValue	= 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int audio_bind(struct usb_composite_dev *cdev)
+{
+#ifndef CONFIG_GADGET_UAC1
+	struct f_uac2_opts	*uac2_opts;
+	int i;
+#else
+#ifndef CONFIG_GADGET_UAC1_LEGACY
+	struct f_uac1_opts	*uac1_opts;
+	int i;
+#else
+	struct f_uac1_legacy_opts	*uac1_opts;
+#endif
+#endif
+	int			status;
+
+#ifndef CONFIG_GADGET_UAC1
+	fi_uac2 = usb_get_function_instance("uac2");
+	if (IS_ERR(fi_uac2))
+		return PTR_ERR(fi_uac2);
+#else
+#ifndef CONFIG_GADGET_UAC1_LEGACY
+	fi_uac1 = usb_get_function_instance("uac1");
+#else
+	fi_uac1 = usb_get_function_instance("uac1_legacy");
+#endif
+	if (IS_ERR(fi_uac1))
+		return PTR_ERR(fi_uac1);
+#endif
+
+#ifndef CONFIG_GADGET_UAC1
+	uac2_opts = container_of(fi_uac2, struct f_uac2_opts, func_inst);
+	uac2_opts->p_chmask = p_chmask;
+
+	for (i = 0; i < p_srates_cnt; ++i)
+		uac2_opts->p_srates[i] = p_srates[i];
+
+	uac2_opts->p_ssize = p_ssize;
+	uac2_opts->p_hs_bint = p_hs_bint;
+	uac2_opts->c_chmask = c_chmask;
+
+	for (i = 0; i < c_srates_cnt; ++i)
+		uac2_opts->c_srates[i] = c_srates[i];
+
+	uac2_opts->c_ssize = c_ssize;
+	uac2_opts->c_hs_bint = c_hs_bint;
+	uac2_opts->req_number = UAC2_DEF_REQ_NUM;
+#else
+#ifndef CONFIG_GADGET_UAC1_LEGACY
+	uac1_opts = container_of(fi_uac1, struct f_uac1_opts, func_inst);
+	uac1_opts->p_chmask = p_chmask;
+
+	for (i = 0; i < p_srates_cnt; ++i)
+		uac1_opts->p_srates[i] = p_srates[i];
+
+	uac1_opts->p_ssize = p_ssize;
+	uac1_opts->c_chmask = c_chmask;
+
+	for (i = 0; i < c_srates_cnt; ++i)
+		uac1_opts->c_srates[i] = c_srates[i];
+
+	uac1_opts->c_ssize = c_ssize;
+	uac1_opts->req_number = UAC1_DEF_REQ_NUM;
+#else /* CONFIG_GADGET_UAC1_LEGACY */
+	uac1_opts = container_of(fi_uac1, struct f_uac1_legacy_opts, func_inst);
+	uac1_opts->fn_play = fn_play;
+	uac1_opts->fn_cap = fn_cap;
+	uac1_opts->fn_cntl = fn_cntl;
+	uac1_opts->req_buf_size = req_buf_size;
+	uac1_opts->req_count = req_count;
+	uac1_opts->audio_buf_size = audio_buf_size;
+#endif /* CONFIG_GADGET_UAC1_LEGACY */
+#endif
+
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (status < 0)
+		goto fail;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+
+	if (gadget_is_otg(cdev->gadget) && !otg_desc[0]) {
+		struct usb_descriptor_header *usb_desc;
+
+		usb_desc = usb_otg_descriptor_alloc(cdev->gadget);
+		if (!usb_desc) {
+			status = -ENOMEM;
+			goto fail;
+		}
+		usb_otg_descriptor_init(cdev->gadget, usb_desc);
+		otg_desc[0] = usb_desc;
+		otg_desc[1] = NULL;
+	}
+
+	status = usb_add_config(cdev, &audio_config_driver, audio_do_config);
+	if (status < 0)
+		goto fail_otg_desc;
+	usb_composite_overwrite_options(cdev, &coverwrite);
+
+	INFO(cdev, "%s, version: %s\n", DRIVER_DESC, DRIVER_VERSION);
+	return 0;
+
+fail_otg_desc:
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+fail:
+#ifndef CONFIG_GADGET_UAC1
+	usb_put_function_instance(fi_uac2);
+#else
+	usb_put_function_instance(fi_uac1);
+#endif
+	return status;
+}
+
+static int audio_unbind(struct usb_composite_dev *cdev)
+{
+#ifdef CONFIG_GADGET_UAC1
+	if (!IS_ERR_OR_NULL(f_uac1))
+		usb_put_function(f_uac1);
+	if (!IS_ERR_OR_NULL(fi_uac1))
+		usb_put_function_instance(fi_uac1);
+#else
+	if (!IS_ERR_OR_NULL(f_uac2))
+		usb_put_function(f_uac2);
+	if (!IS_ERR_OR_NULL(fi_uac2))
+		usb_put_function_instance(fi_uac2);
+#endif
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+
+	return 0;
+}
+
+static struct usb_composite_driver audio_driver = {
+	.name		= "g_audio",
+	.dev		= &device_desc,
+	.strings	= audio_strings,
+	.max_speed	= USB_SPEED_HIGH,
+	.bind		= audio_bind,
+	.unbind		= audio_unbind,
+};
+
+module_usb_composite_driver(audio_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Bryan Wu <cooloney@kernel.org>");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/usb/gadget/legacy/cdc2.c b/drivers/usb/gadget/legacy/cdc2.c
new file mode 100644
index 000000000..563363aba
--- /dev/null
+++ b/drivers/usb/gadget/legacy/cdc2.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * cdc2.c -- CDC Composite driver, with ECM and ACM support
+ *
+ * Copyright (C) 2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "u_ether.h"
+#include "u_serial.h"
+#include "u_ecm.h"
+
+
+#define DRIVER_DESC		"CDC Composite Gadget"
+#define DRIVER_VERSION		"King Kamehameha Day 2008"
+
+/*-------------------------------------------------------------------------*/
+
+/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
+
+/* Thanks to NetChip Technologies for donating this product ID.
+ * It's for devices with only this composite CDC configuration.
+ */
+#define CDC_VENDOR_NUM		0x0525	/* NetChip */
+#define CDC_PRODUCT_NUM		0xa4aa	/* CDC Composite: ECM + ACM */
+
+USB_GADGET_COMPOSITE_OPTIONS();
+
+USB_ETHERNET_MODULE_PARAMETERS();
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	/* .bcdUSB = DYNAMIC */
+
+	.bDeviceClass =		USB_CLASS_COMM,
+	.bDeviceSubClass =	0,
+	.bDeviceProtocol =	0,
+	/* .bMaxPacketSize0 = f(hardware) */
+
+	/* Vendor and product id can be overridden by module parameters.  */
+	.idVendor =		cpu_to_le16(CDC_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(CDC_PRODUCT_NUM),
+	/* .bcdDevice = f(hardware) */
+	/* .iManufacturer = DYNAMIC */
+	/* .iProduct = DYNAMIC */
+	/* NO SERIAL NUMBER */
+	.bNumConfigurations =	1,
+};
+
+static const struct usb_descriptor_header *otg_desc[2];
+
+/* string IDs are assigned dynamically */
+static struct usb_string strings_dev[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+static struct usb_function *f_acm;
+static struct usb_function_instance *fi_serial;
+
+static struct usb_function *f_ecm;
+static struct usb_function_instance *fi_ecm;
+
+/*
+ * We _always_ have both CDC ECM and CDC ACM functions.
+ */
+static int cdc_do_config(struct usb_configuration *c)
+{
+	int	status;
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	f_ecm = usb_get_function(fi_ecm);
+	if (IS_ERR(f_ecm)) {
+		status = PTR_ERR(f_ecm);
+		goto err_get_ecm;
+	}
+
+	status = usb_add_function(c, f_ecm);
+	if (status)
+		goto err_add_ecm;
+
+	f_acm = usb_get_function(fi_serial);
+	if (IS_ERR(f_acm)) {
+		status = PTR_ERR(f_acm);
+		goto err_get_acm;
+	}
+
+	status = usb_add_function(c, f_acm);
+	if (status)
+		goto err_add_acm;
+	return 0;
+
+err_add_acm:
+	usb_put_function(f_acm);
+err_get_acm:
+	usb_remove_function(c, f_ecm);
+err_add_ecm:
+	usb_put_function(f_ecm);
+err_get_ecm:
+	return status;
+}
+
+static struct usb_configuration cdc_config_driver = {
+	.label			= "CDC Composite (ECM + ACM)",
+	.bConfigurationValue	= 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int cdc_bind(struct usb_composite_dev *cdev)
+{
+	struct usb_gadget	*gadget = cdev->gadget;
+	struct f_ecm_opts	*ecm_opts;
+	int			status;
+
+	if (!can_support_ecm(cdev->gadget)) {
+		dev_err(&gadget->dev, "controller '%s' not usable\n",
+				gadget->name);
+		return -EINVAL;
+	}
+
+	fi_ecm = usb_get_function_instance("ecm");
+	if (IS_ERR(fi_ecm))
+		return PTR_ERR(fi_ecm);
+
+	ecm_opts = container_of(fi_ecm, struct f_ecm_opts, func_inst);
+
+	gether_set_qmult(ecm_opts->net, qmult);
+	if (!gether_set_host_addr(ecm_opts->net, host_addr))
+		pr_info("using host ethernet address: %s", host_addr);
+	if (!gether_set_dev_addr(ecm_opts->net, dev_addr))
+		pr_info("using self ethernet address: %s", dev_addr);
+
+	fi_serial = usb_get_function_instance("acm");
+	if (IS_ERR(fi_serial)) {
+		status = PTR_ERR(fi_serial);
+		goto fail;
+	}
+
+	/* Allocate string descriptor numbers ... note that string
+	 * contents can be overridden by the composite_dev glue.
+	 */
+
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (status < 0)
+		goto fail1;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+
+	if (gadget_is_otg(gadget) && !otg_desc[0]) {
+		struct usb_descriptor_header *usb_desc;
+
+		usb_desc = usb_otg_descriptor_alloc(gadget);
+		if (!usb_desc) {
+			status = -ENOMEM;
+			goto fail1;
+		}
+		usb_otg_descriptor_init(gadget, usb_desc);
+		otg_desc[0] = usb_desc;
+		otg_desc[1] = NULL;
+	}
+
+	/* register our configuration */
+	status = usb_add_config(cdev, &cdc_config_driver, cdc_do_config);
+	if (status < 0)
+		goto fail2;
+
+	usb_composite_overwrite_options(cdev, &coverwrite);
+	dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n",
+			DRIVER_DESC);
+
+	return 0;
+
+fail2:
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+fail1:
+	usb_put_function_instance(fi_serial);
+fail:
+	usb_put_function_instance(fi_ecm);
+	return status;
+}
+
+static int cdc_unbind(struct usb_composite_dev *cdev)
+{
+	usb_put_function(f_acm);
+	usb_put_function_instance(fi_serial);
+	if (!IS_ERR_OR_NULL(f_ecm))
+		usb_put_function(f_ecm);
+	if (!IS_ERR_OR_NULL(fi_ecm))
+		usb_put_function_instance(fi_ecm);
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+
+	return 0;
+}
+
+static struct usb_composite_driver cdc_driver = {
+	.name		= "g_cdc",
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_SUPER,
+	.bind		= cdc_bind,
+	.unbind		= cdc_unbind,
+};
+
+module_usb_composite_driver(cdc_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/legacy/dbgp.c b/drivers/usb/gadget/legacy/dbgp.c
new file mode 100644
index 000000000..b62e45235
--- /dev/null
+++ b/drivers/usb/gadget/legacy/dbgp.c
@@ -0,0 +1,439 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dbgp.c -- EHCI Debug Port device gadget
+ *
+ * Copyright (C) 2010 Stephane Duverger
+ *
+ * Released under the GPLv2.
+ */
+
+/* verbose messages */
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "u_serial.h"
+
+#define DRIVER_VENDOR_ID	0x0525 /* NetChip */
+#define DRIVER_PRODUCT_ID	0xc0de /* undefined */
+
+#define USB_DEBUG_MAX_PACKET_SIZE     8
+#define DBGP_REQ_EP0_LEN              128
+#define DBGP_REQ_LEN                  512
+
+static struct dbgp {
+	struct usb_gadget  *gadget;
+	struct usb_request *req;
+	struct usb_ep      *i_ep;
+	struct usb_ep      *o_ep;
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+	struct gserial     *serial;
+#endif
+} dbgp;
+
+static struct usb_device_descriptor device_desc = {
+	.bLength = sizeof device_desc,
+	.bDescriptorType = USB_DT_DEVICE,
+	.bcdUSB = cpu_to_le16(0x0200),
+	.bDeviceClass =	USB_CLASS_VENDOR_SPEC,
+	.idVendor = cpu_to_le16(DRIVER_VENDOR_ID),
+	.idProduct = cpu_to_le16(DRIVER_PRODUCT_ID),
+	.bNumConfigurations = 1,
+};
+
+static struct usb_debug_descriptor dbg_desc = {
+	.bLength = sizeof dbg_desc,
+	.bDescriptorType = USB_DT_DEBUG,
+};
+
+static struct usb_endpoint_descriptor i_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+	.bmAttributes = USB_ENDPOINT_XFER_BULK,
+	.bEndpointAddress = USB_DIR_IN,
+};
+
+static struct usb_endpoint_descriptor o_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+	.bmAttributes = USB_ENDPOINT_XFER_BULK,
+	.bEndpointAddress = USB_DIR_OUT,
+};
+
+#ifdef CONFIG_USB_G_DBGP_PRINTK
+static int dbgp_consume(char *buf, unsigned len)
+{
+	char c;
+
+	if (!len)
+		return 0;
+
+	c = buf[len-1];
+	if (c != 0)
+		buf[len-1] = 0;
+
+	printk(KERN_NOTICE "%s%c", buf, c);
+	return 0;
+}
+
+static void __disable_ep(struct usb_ep *ep)
+{
+	usb_ep_disable(ep);
+}
+
+static void dbgp_disable_ep(void)
+{
+	__disable_ep(dbgp.i_ep);
+	__disable_ep(dbgp.o_ep);
+}
+
+static void dbgp_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	int stp;
+	int err = 0;
+	int status = req->status;
+
+	if (ep == dbgp.i_ep) {
+		stp = 1;
+		goto fail;
+	}
+
+	if (status != 0) {
+		stp = 2;
+		goto release_req;
+	}
+
+	dbgp_consume(req->buf, req->actual);
+
+	req->length = DBGP_REQ_LEN;
+	err = usb_ep_queue(ep, req, GFP_ATOMIC);
+	if (err < 0) {
+		stp = 3;
+		goto release_req;
+	}
+
+	return;
+
+release_req:
+	kfree(req->buf);
+	usb_ep_free_request(dbgp.o_ep, req);
+	dbgp_disable_ep();
+fail:
+	dev_dbg(&dbgp.gadget->dev,
+		"complete: failure (%d:%d) ==> %d\n", stp, err, status);
+}
+
+static int dbgp_enable_ep_req(struct usb_ep *ep)
+{
+	int err, stp;
+	struct usb_request *req;
+
+	req = usb_ep_alloc_request(ep, GFP_KERNEL);
+	if (!req) {
+		err = -ENOMEM;
+		stp = 1;
+		goto fail_1;
+	}
+
+	req->buf = kzalloc(DBGP_REQ_LEN, GFP_KERNEL);
+	if (!req->buf) {
+		err = -ENOMEM;
+		stp = 2;
+		goto fail_2;
+	}
+
+	req->complete = dbgp_complete;
+	req->length = DBGP_REQ_LEN;
+	err = usb_ep_queue(ep, req, GFP_ATOMIC);
+	if (err < 0) {
+		stp = 3;
+		goto fail_3;
+	}
+
+	return 0;
+
+fail_3:
+	kfree(req->buf);
+fail_2:
+	usb_ep_free_request(dbgp.o_ep, req);
+fail_1:
+	dev_dbg(&dbgp.gadget->dev,
+		"enable ep req: failure (%d:%d)\n", stp, err);
+	return err;
+}
+
+static int __enable_ep(struct usb_ep *ep, struct usb_endpoint_descriptor *desc)
+{
+	int err;
+	ep->desc = desc;
+	err = usb_ep_enable(ep);
+	return err;
+}
+
+static int dbgp_enable_ep(void)
+{
+	int err, stp;
+
+	err = __enable_ep(dbgp.i_ep, &i_desc);
+	if (err < 0) {
+		stp = 1;
+		goto fail_1;
+	}
+
+	err = __enable_ep(dbgp.o_ep, &o_desc);
+	if (err < 0) {
+		stp = 2;
+		goto fail_2;
+	}
+
+	err = dbgp_enable_ep_req(dbgp.o_ep);
+	if (err < 0) {
+		stp = 3;
+		goto fail_3;
+	}
+
+	return 0;
+
+fail_3:
+	__disable_ep(dbgp.o_ep);
+fail_2:
+	__disable_ep(dbgp.i_ep);
+fail_1:
+	dev_dbg(&dbgp.gadget->dev, "enable ep: failure (%d:%d)\n", stp, err);
+	return err;
+}
+#endif
+
+static void dbgp_disconnect(struct usb_gadget *gadget)
+{
+#ifdef CONFIG_USB_G_DBGP_PRINTK
+	dbgp_disable_ep();
+#else
+	gserial_disconnect(dbgp.serial);
+#endif
+}
+
+static void dbgp_unbind(struct usb_gadget *gadget)
+{
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+	kfree(dbgp.serial);
+	dbgp.serial = NULL;
+#endif
+	if (dbgp.req) {
+		kfree(dbgp.req->buf);
+		usb_ep_free_request(gadget->ep0, dbgp.req);
+		dbgp.req = NULL;
+	}
+}
+
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+static unsigned char tty_line;
+#endif
+
+static int dbgp_configure_endpoints(struct usb_gadget *gadget)
+{
+	int stp;
+
+	usb_ep_autoconfig_reset(gadget);
+
+	dbgp.i_ep = usb_ep_autoconfig(gadget, &i_desc);
+	if (!dbgp.i_ep) {
+		stp = 1;
+		goto fail_1;
+	}
+
+	i_desc.wMaxPacketSize =
+		cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE);
+
+	dbgp.o_ep = usb_ep_autoconfig(gadget, &o_desc);
+	if (!dbgp.o_ep) {
+		stp = 2;
+		goto fail_1;
+	}
+
+	o_desc.wMaxPacketSize =
+		cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE);
+
+	dbg_desc.bDebugInEndpoint = i_desc.bEndpointAddress;
+	dbg_desc.bDebugOutEndpoint = o_desc.bEndpointAddress;
+
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+	dbgp.serial->in = dbgp.i_ep;
+	dbgp.serial->out = dbgp.o_ep;
+
+	dbgp.serial->in->desc = &i_desc;
+	dbgp.serial->out->desc = &o_desc;
+#endif
+
+	return 0;
+
+fail_1:
+	dev_dbg(&dbgp.gadget->dev, "ep config: failure (%d)\n", stp);
+	return -ENODEV;
+}
+
+static int dbgp_bind(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	int err, stp;
+
+	dbgp.gadget = gadget;
+
+	dbgp.req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
+	if (!dbgp.req) {
+		err = -ENOMEM;
+		stp = 1;
+		goto fail;
+	}
+
+	dbgp.req->buf = kmalloc(DBGP_REQ_EP0_LEN, GFP_KERNEL);
+	if (!dbgp.req->buf) {
+		err = -ENOMEM;
+		stp = 2;
+		goto fail;
+	}
+
+	dbgp.req->length = DBGP_REQ_EP0_LEN;
+
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+	dbgp.serial = kzalloc(sizeof(struct gserial), GFP_KERNEL);
+	if (!dbgp.serial) {
+		stp = 3;
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	if (gserial_alloc_line(&tty_line)) {
+		stp = 4;
+		err = -ENODEV;
+		goto fail;
+	}
+#endif
+
+	err = dbgp_configure_endpoints(gadget);
+	if (err < 0) {
+		stp = 5;
+		goto fail;
+	}
+
+	dev_dbg(&dbgp.gadget->dev, "bind: success\n");
+	return 0;
+
+fail:
+	dev_dbg(&gadget->dev, "bind: failure (%d:%d)\n", stp, err);
+	dbgp_unbind(gadget);
+	return err;
+}
+
+static void dbgp_setup_complete(struct usb_ep *ep,
+				struct usb_request *req)
+{
+	dev_dbg(&dbgp.gadget->dev, "setup complete: %d, %d/%d\n",
+		req->status, req->actual, req->length);
+}
+
+static int dbgp_setup(struct usb_gadget *gadget,
+		      const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_request *req = dbgp.req;
+	u8 request = ctrl->bRequest;
+	u16 value = le16_to_cpu(ctrl->wValue);
+	u16 length = le16_to_cpu(ctrl->wLength);
+	int err = -EOPNOTSUPP;
+	void *data = NULL;
+	u16 len = 0;
+
+	if (length > DBGP_REQ_LEN) {
+		if (ctrl->bRequestType & USB_DIR_IN) {
+			/* Cast away the const, we are going to overwrite on purpose. */
+			__le16 *temp = (__le16 *)&ctrl->wLength;
+
+			*temp = cpu_to_le16(DBGP_REQ_LEN);
+			length = DBGP_REQ_LEN;
+		} else {
+			return err;
+		}
+	}
+
+
+	if (request == USB_REQ_GET_DESCRIPTOR) {
+		switch (value>>8) {
+		case USB_DT_DEVICE:
+			dev_dbg(&dbgp.gadget->dev, "setup: desc device\n");
+			len = sizeof device_desc;
+			data = &device_desc;
+			device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
+			break;
+		case USB_DT_DEBUG:
+			dev_dbg(&dbgp.gadget->dev, "setup: desc debug\n");
+			len = sizeof dbg_desc;
+			data = &dbg_desc;
+			break;
+		default:
+			goto fail;
+		}
+		err = 0;
+	} else if (request == USB_REQ_SET_FEATURE &&
+		   value == USB_DEVICE_DEBUG_MODE) {
+		dev_dbg(&dbgp.gadget->dev, "setup: feat debug\n");
+#ifdef CONFIG_USB_G_DBGP_PRINTK
+		err = dbgp_enable_ep();
+#else
+		err = dbgp_configure_endpoints(gadget);
+		if (err < 0) {
+			goto fail;
+		}
+		err = gserial_connect(dbgp.serial, tty_line);
+#endif
+		if (err < 0)
+			goto fail;
+	} else
+		goto fail;
+
+	req->length = min(length, len);
+	req->zero = len < req->length;
+	if (data && req->length)
+		memcpy(req->buf, data, req->length);
+
+	req->complete = dbgp_setup_complete;
+	return usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
+
+fail:
+	dev_dbg(&dbgp.gadget->dev,
+		"setup: failure req %x v %x\n", request, value);
+	return err;
+}
+
+static struct usb_gadget_driver dbgp_driver = {
+	.function = "dbgp",
+	.max_speed = USB_SPEED_HIGH,
+	.bind = dbgp_bind,
+	.unbind = dbgp_unbind,
+	.setup = dbgp_setup,
+	.reset = dbgp_disconnect,
+	.disconnect = dbgp_disconnect,
+	.driver	= {
+		.owner = THIS_MODULE,
+		.name = "dbgp"
+	},
+};
+
+static int __init dbgp_init(void)
+{
+	return usb_gadget_register_driver(&dbgp_driver);
+}
+
+static void __exit dbgp_exit(void)
+{
+	usb_gadget_unregister_driver(&dbgp_driver);
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+	gserial_free_line(tty_line);
+#endif
+}
+
+MODULE_AUTHOR("Stephane Duverger");
+MODULE_LICENSE("GPL");
+module_init(dbgp_init);
+module_exit(dbgp_exit);
diff --git a/drivers/usb/gadget/legacy/ether.c b/drivers/usb/gadget/legacy/ether.c
new file mode 100644
index 000000000..99c7fc0d1
--- /dev/null
+++ b/drivers/usb/gadget/legacy/ether.c
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ether.c -- Ethernet gadget driver, with CDC and non-CDC options
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+
+#if defined USB_ETH_RNDIS
+#  undef USB_ETH_RNDIS
+#endif
+#ifdef CONFIG_USB_ETH_RNDIS
+#  define USB_ETH_RNDIS y
+#endif
+
+#include "u_ether.h"
+
+
+/*
+ * Ethernet gadget driver -- with CDC and non-CDC options
+ * Builds on hardware support for a full duplex link.
+ *
+ * CDC Ethernet is the standard USB solution for sending Ethernet frames
+ * using USB.  Real hardware tends to use the same framing protocol but look
+ * different for control features.  This driver strongly prefers to use
+ * this USB-IF standard as its open-systems interoperability solution;
+ * most host side USB stacks (except from Microsoft) support it.
+ *
+ * This is sometimes called "CDC ECM" (Ethernet Control Model) to support
+ * TLA-soup.  "CDC ACM" (Abstract Control Model) is for modems, and a new
+ * "CDC EEM" (Ethernet Emulation Model) is starting to spread.
+ *
+ * There's some hardware that can't talk CDC ECM.  We make that hardware
+ * implement a "minimalist" vendor-agnostic CDC core:  same framing, but
+ * link-level setup only requires activating the configuration.  Only the
+ * endpoint descriptors, and product/vendor IDs, are relevant; no control
+ * operations are available.  Linux supports it, but other host operating
+ * systems may not.  (This is a subset of CDC Ethernet.)
+ *
+ * It turns out that if you add a few descriptors to that "CDC Subset",
+ * (Windows) host side drivers from MCCI can treat it as one submode of
+ * a proprietary scheme called "SAFE" ... without needing to know about
+ * specific product/vendor IDs.  So we do that, making it easier to use
+ * those MS-Windows drivers.  Those added descriptors make it resemble a
+ * CDC MDLM device, but they don't change device behavior at all.  (See
+ * MCCI Engineering report 950198 "SAFE Networking Functions".)
+ *
+ * A third option is also in use.  Rather than CDC Ethernet, or something
+ * simpler, Microsoft pushes their own approach: RNDIS.  The published
+ * RNDIS specs are ambiguous and appear to be incomplete, and are also
+ * needlessly complex.  They borrow more from CDC ACM than CDC ECM.
+ */
+
+#define DRIVER_DESC		"Ethernet Gadget"
+#define DRIVER_VERSION		"Memorial Day 2008"
+
+#ifdef USB_ETH_RNDIS
+#define PREFIX			"RNDIS/"
+#else
+#define PREFIX			""
+#endif
+
+/*
+ * This driver aims for interoperability by using CDC ECM unless
+ *
+ *		can_support_ecm()
+ *
+ * returns false, in which case it supports the CDC Subset.  By default,
+ * that returns true; most hardware has no problems with CDC ECM, that's
+ * a good default.  Previous versions of this driver had no default; this
+ * version changes that, removing overhead for new controller support.
+ *
+ *	IF YOUR HARDWARE CAN'T SUPPORT CDC ECM, UPDATE THAT ROUTINE!
+ */
+
+static inline bool has_rndis(void)
+{
+#ifdef	USB_ETH_RNDIS
+	return true;
+#else
+	return false;
+#endif
+}
+
+#include <linux/module.h>
+
+#include "u_ecm.h"
+#include "u_gether.h"
+#ifdef	USB_ETH_RNDIS
+#include "u_rndis.h"
+#include "rndis.h"
+#else
+#define rndis_borrow_net(...) do {} while (0)
+#endif
+#include "u_eem.h"
+
+/*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
+
+USB_ETHERNET_MODULE_PARAMETERS();
+
+/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
+
+/* Thanks to NetChip Technologies for donating this product ID.
+ * It's for devices with only CDC Ethernet configurations.
+ */
+#define CDC_VENDOR_NUM		0x0525	/* NetChip */
+#define CDC_PRODUCT_NUM		0xa4a1	/* Linux-USB Ethernet Gadget */
+
+/* For hardware that can't talk CDC, we use the same vendor ID that
+ * ARM Linux has used for ethernet-over-usb, both with sa1100 and
+ * with pxa250.  We're protocol-compatible, if the host-side drivers
+ * use the endpoint descriptors.  bcdDevice (version) is nonzero, so
+ * drivers that need to hard-wire endpoint numbers have a hook.
+ *
+ * The protocol is a minimal subset of CDC Ether, which works on any bulk
+ * hardware that's not deeply broken ... even on hardware that can't talk
+ * RNDIS (like SA-1100, with no interrupt endpoint, or anything that
+ * doesn't handle control-OUT).
+ */
+#define	SIMPLE_VENDOR_NUM	0x049f
+#define	SIMPLE_PRODUCT_NUM	0x505a
+
+/* For hardware that can talk RNDIS and either of the above protocols,
+ * use this ID ... the windows INF files will know it.  Unless it's
+ * used with CDC Ethernet, Linux 2.4 hosts will need updates to choose
+ * the non-RNDIS configuration.
+ */
+#define RNDIS_VENDOR_NUM	0x0525	/* NetChip */
+#define RNDIS_PRODUCT_NUM	0xa4a2	/* Ethernet/RNDIS Gadget */
+
+/* For EEM gadgets */
+#define EEM_VENDOR_NUM		0x1d6b	/* Linux Foundation */
+#define EEM_PRODUCT_NUM		0x0102	/* EEM Gadget */
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	/* .bcdUSB = DYNAMIC */
+
+	.bDeviceClass =		USB_CLASS_COMM,
+	.bDeviceSubClass =	0,
+	.bDeviceProtocol =	0,
+	/* .bMaxPacketSize0 = f(hardware) */
+
+	/* Vendor and product id defaults change according to what configs
+	 * we support.  (As does bNumConfigurations.)  These values can
+	 * also be overridden by module parameters.
+	 */
+	.idVendor =		cpu_to_le16 (CDC_VENDOR_NUM),
+	.idProduct =		cpu_to_le16 (CDC_PRODUCT_NUM),
+	/* .bcdDevice = f(hardware) */
+	/* .iManufacturer = DYNAMIC */
+	/* .iProduct = DYNAMIC */
+	/* NO SERIAL NUMBER */
+	.bNumConfigurations =	1,
+};
+
+static const struct usb_descriptor_header *otg_desc[2];
+
+static struct usb_string strings_dev[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = PREFIX DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+static struct usb_function_instance *fi_ecm;
+static struct usb_function *f_ecm;
+
+static struct usb_function_instance *fi_eem;
+static struct usb_function *f_eem;
+
+static struct usb_function_instance *fi_geth;
+static struct usb_function *f_geth;
+
+static struct usb_function_instance *fi_rndis;
+static struct usb_function *f_rndis;
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * We may not have an RNDIS configuration, but if we do it needs to be
+ * the first one present.  That's to make Microsoft's drivers happy,
+ * and to follow DOCSIS 1.0 (cable modem standard).
+ */
+static int rndis_do_config(struct usb_configuration *c)
+{
+	int status;
+
+	/* FIXME alloc iConfiguration string, set it in c->strings */
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	f_rndis = usb_get_function(fi_rndis);
+	if (IS_ERR(f_rndis))
+		return PTR_ERR(f_rndis);
+
+	status = usb_add_function(c, f_rndis);
+	if (status < 0)
+		usb_put_function(f_rndis);
+
+	return status;
+}
+
+static struct usb_configuration rndis_config_driver = {
+	.label			= "RNDIS",
+	.bConfigurationValue	= 2,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USB_ETH_EEM
+static bool use_eem = 1;
+#else
+static bool use_eem;
+#endif
+module_param(use_eem, bool, 0);
+MODULE_PARM_DESC(use_eem, "use CDC EEM mode");
+
+/*
+ * We _always_ have an ECM, CDC Subset, or EEM configuration.
+ */
+static int eth_do_config(struct usb_configuration *c)
+{
+	int status = 0;
+
+	/* FIXME alloc iConfiguration string, set it in c->strings */
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	if (use_eem) {
+		f_eem = usb_get_function(fi_eem);
+		if (IS_ERR(f_eem))
+			return PTR_ERR(f_eem);
+
+		status = usb_add_function(c, f_eem);
+		if (status < 0)
+			usb_put_function(f_eem);
+
+		return status;
+	} else if (can_support_ecm(c->cdev->gadget)) {
+		f_ecm = usb_get_function(fi_ecm);
+		if (IS_ERR(f_ecm))
+			return PTR_ERR(f_ecm);
+
+		status = usb_add_function(c, f_ecm);
+		if (status < 0)
+			usb_put_function(f_ecm);
+
+		return status;
+	} else {
+		f_geth = usb_get_function(fi_geth);
+		if (IS_ERR(f_geth))
+			return PTR_ERR(f_geth);
+
+		status = usb_add_function(c, f_geth);
+		if (status < 0)
+			usb_put_function(f_geth);
+
+		return status;
+	}
+
+}
+
+static struct usb_configuration eth_config_driver = {
+	/* .label = f(hardware) */
+	.bConfigurationValue	= 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int eth_bind(struct usb_composite_dev *cdev)
+{
+	struct usb_gadget	*gadget = cdev->gadget;
+	struct f_eem_opts	*eem_opts = NULL;
+	struct f_ecm_opts	*ecm_opts = NULL;
+	struct f_gether_opts	*geth_opts = NULL;
+	struct net_device	*net;
+	int			status;
+
+	/* set up main config label and device descriptor */
+	if (use_eem) {
+		/* EEM */
+		fi_eem = usb_get_function_instance("eem");
+		if (IS_ERR(fi_eem))
+			return PTR_ERR(fi_eem);
+
+		eem_opts = container_of(fi_eem, struct f_eem_opts, func_inst);
+
+		net = eem_opts->net;
+
+		eth_config_driver.label = "CDC Ethernet (EEM)";
+		device_desc.idVendor = cpu_to_le16(EEM_VENDOR_NUM);
+		device_desc.idProduct = cpu_to_le16(EEM_PRODUCT_NUM);
+	} else if (can_support_ecm(gadget)) {
+		/* ECM */
+
+		fi_ecm = usb_get_function_instance("ecm");
+		if (IS_ERR(fi_ecm))
+			return PTR_ERR(fi_ecm);
+
+		ecm_opts = container_of(fi_ecm, struct f_ecm_opts, func_inst);
+
+		net = ecm_opts->net;
+
+		eth_config_driver.label = "CDC Ethernet (ECM)";
+	} else {
+		/* CDC Subset */
+
+		fi_geth = usb_get_function_instance("geth");
+		if (IS_ERR(fi_geth))
+			return PTR_ERR(fi_geth);
+
+		geth_opts = container_of(fi_geth, struct f_gether_opts,
+					 func_inst);
+
+		net = geth_opts->net;
+
+		eth_config_driver.label = "CDC Subset/SAFE";
+
+		device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM);
+		device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM);
+		if (!has_rndis())
+			device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
+	}
+
+	gether_set_qmult(net, qmult);
+	if (!gether_set_host_addr(net, host_addr))
+		pr_info("using host ethernet address: %s", host_addr);
+	if (!gether_set_dev_addr(net, dev_addr))
+		pr_info("using self ethernet address: %s", dev_addr);
+
+	if (has_rndis()) {
+		/* RNDIS plus ECM-or-Subset */
+		gether_set_gadget(net, cdev->gadget);
+		status = gether_register_netdev(net);
+		if (status)
+			goto fail;
+
+		if (use_eem)
+			eem_opts->bound = true;
+		else if (can_support_ecm(gadget))
+			ecm_opts->bound = true;
+		else
+			geth_opts->bound = true;
+
+		fi_rndis = usb_get_function_instance("rndis");
+		if (IS_ERR(fi_rndis)) {
+			status = PTR_ERR(fi_rndis);
+			goto fail;
+		}
+
+		rndis_borrow_net(fi_rndis, net);
+
+		device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM);
+		device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM);
+		device_desc.bNumConfigurations = 2;
+	}
+
+	/* Allocate string descriptor numbers ... note that string
+	 * contents can be overridden by the composite_dev glue.
+	 */
+
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (status < 0)
+		goto fail1;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+
+	if (gadget_is_otg(gadget) && !otg_desc[0]) {
+		struct usb_descriptor_header *usb_desc;
+
+		usb_desc = usb_otg_descriptor_alloc(gadget);
+		if (!usb_desc) {
+			status = -ENOMEM;
+			goto fail1;
+		}
+		usb_otg_descriptor_init(gadget, usb_desc);
+		otg_desc[0] = usb_desc;
+		otg_desc[1] = NULL;
+	}
+
+	/* register our configuration(s); RNDIS first, if it's used */
+	if (has_rndis()) {
+		status = usb_add_config(cdev, &rndis_config_driver,
+				rndis_do_config);
+		if (status < 0)
+			goto fail2;
+	}
+
+	status = usb_add_config(cdev, &eth_config_driver, eth_do_config);
+	if (status < 0)
+		goto fail2;
+
+	usb_composite_overwrite_options(cdev, &coverwrite);
+	dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n",
+			DRIVER_DESC);
+
+	return 0;
+
+fail2:
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+fail1:
+	if (has_rndis())
+		usb_put_function_instance(fi_rndis);
+fail:
+	if (use_eem)
+		usb_put_function_instance(fi_eem);
+	else if (can_support_ecm(gadget))
+		usb_put_function_instance(fi_ecm);
+	else
+		usb_put_function_instance(fi_geth);
+	return status;
+}
+
+static int eth_unbind(struct usb_composite_dev *cdev)
+{
+	if (has_rndis()) {
+		usb_put_function(f_rndis);
+		usb_put_function_instance(fi_rndis);
+	}
+	if (use_eem) {
+		usb_put_function(f_eem);
+		usb_put_function_instance(fi_eem);
+	} else if (can_support_ecm(cdev->gadget)) {
+		usb_put_function(f_ecm);
+		usb_put_function_instance(fi_ecm);
+	} else {
+		usb_put_function(f_geth);
+		usb_put_function_instance(fi_geth);
+	}
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+
+	return 0;
+}
+
+static struct usb_composite_driver eth_driver = {
+	.name		= "g_ether",
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_SUPER,
+	.bind		= eth_bind,
+	.unbind		= eth_unbind,
+};
+
+module_usb_composite_driver(eth_driver);
+
+MODULE_DESCRIPTION(PREFIX DRIVER_DESC);
+MODULE_AUTHOR("David Brownell, Benedikt Spanger");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/legacy/g_ffs.c b/drivers/usb/gadget/legacy/g_ffs.c
new file mode 100644
index 000000000..ae6d8f709
--- /dev/null
+++ b/drivers/usb/gadget/legacy/g_ffs.c
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * g_ffs.c -- user mode file system API for USB composite function controllers
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ * Author: Michal Nazarewicz <mina86@mina86.com>
+ */
+
+#define pr_fmt(fmt) "g_ffs: " fmt
+
+#include <linux/module.h>
+
+#if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
+#include <linux/netdevice.h>
+
+#  if defined USB_ETH_RNDIS
+#    undef USB_ETH_RNDIS
+#  endif
+#  ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+#    define USB_ETH_RNDIS y
+#  endif
+
+#  include "u_ecm.h"
+#  include "u_gether.h"
+#  ifdef USB_ETH_RNDIS
+#    include "u_rndis.h"
+#    include "rndis.h"
+#  endif
+#  include "u_ether.h"
+
+USB_ETHERNET_MODULE_PARAMETERS();
+
+#  ifdef CONFIG_USB_FUNCTIONFS_ETH
+static int eth_bind_config(struct usb_configuration *c);
+static struct usb_function_instance *fi_ecm;
+static struct usb_function *f_ecm;
+static struct usb_function_instance *fi_geth;
+static struct usb_function *f_geth;
+#  endif
+#  ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+static int bind_rndis_config(struct usb_configuration *c);
+static struct usb_function_instance *fi_rndis;
+static struct usb_function *f_rndis;
+#  endif
+#endif
+
+#include "u_fs.h"
+
+#define DRIVER_NAME	"g_ffs"
+#define DRIVER_DESC	"USB Function Filesystem"
+#define DRIVER_VERSION	"24 Aug 2004"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Michal Nazarewicz");
+MODULE_LICENSE("GPL");
+
+#define GFS_VENDOR_ID	0x1d6b	/* Linux Foundation */
+#define GFS_PRODUCT_ID	0x0105	/* FunctionFS Gadget */
+
+#define GFS_MAX_DEVS	10
+
+USB_GADGET_COMPOSITE_OPTIONS();
+
+static struct usb_device_descriptor gfs_dev_desc = {
+	.bLength		= sizeof gfs_dev_desc,
+	.bDescriptorType	= USB_DT_DEVICE,
+
+	/* .bcdUSB = DYNAMIC */
+	.bDeviceClass		= USB_CLASS_PER_INTERFACE,
+
+	.idVendor		= cpu_to_le16(GFS_VENDOR_ID),
+	.idProduct		= cpu_to_le16(GFS_PRODUCT_ID),
+};
+
+static char *func_names[GFS_MAX_DEVS];
+static unsigned int func_num;
+
+module_param_named(bDeviceClass,    gfs_dev_desc.bDeviceClass,    byte,   0644);
+MODULE_PARM_DESC(bDeviceClass, "USB Device class");
+module_param_named(bDeviceSubClass, gfs_dev_desc.bDeviceSubClass, byte,   0644);
+MODULE_PARM_DESC(bDeviceSubClass, "USB Device subclass");
+module_param_named(bDeviceProtocol, gfs_dev_desc.bDeviceProtocol, byte,   0644);
+MODULE_PARM_DESC(bDeviceProtocol, "USB Device protocol");
+module_param_array_named(functions, func_names, charp, &func_num, 0);
+MODULE_PARM_DESC(functions, "USB Functions list");
+
+static const struct usb_descriptor_header *gfs_otg_desc[2];
+
+/* String IDs are assigned dynamically */
+static struct usb_string gfs_strings[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+	{ .s = "FunctionFS + RNDIS" },
+#endif
+#ifdef CONFIG_USB_FUNCTIONFS_ETH
+	{ .s = "FunctionFS + ECM" },
+#endif
+#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
+	{ .s = "FunctionFS" },
+#endif
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings *gfs_dev_strings[] = {
+	&(struct usb_gadget_strings) {
+		.language	= 0x0409,	/* en-us */
+		.strings	= gfs_strings,
+	},
+	NULL,
+};
+
+struct gfs_configuration {
+	struct usb_configuration c;
+	int (*eth)(struct usb_configuration *c);
+	int num;
+};
+
+static struct gfs_configuration gfs_configurations[] = {
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+	{
+		.eth		= bind_rndis_config,
+	},
+#endif
+
+#ifdef CONFIG_USB_FUNCTIONFS_ETH
+	{
+		.eth		= eth_bind_config,
+	},
+#endif
+
+#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
+	{
+	},
+#endif
+};
+
+static void *functionfs_acquire_dev(struct ffs_dev *dev);
+static void functionfs_release_dev(struct ffs_dev *dev);
+static int functionfs_ready_callback(struct ffs_data *ffs);
+static void functionfs_closed_callback(struct ffs_data *ffs);
+static int gfs_bind(struct usb_composite_dev *cdev);
+static int gfs_unbind(struct usb_composite_dev *cdev);
+static int gfs_do_config(struct usb_configuration *c);
+
+
+static struct usb_composite_driver gfs_driver = {
+	.name		= DRIVER_NAME,
+	.dev		= &gfs_dev_desc,
+	.strings	= gfs_dev_strings,
+	.max_speed	= USB_SPEED_SUPER,
+	.bind		= gfs_bind,
+	.unbind		= gfs_unbind,
+};
+
+static unsigned int missing_funcs;
+static bool gfs_registered;
+static bool gfs_single_func;
+static struct usb_function_instance **fi_ffs;
+static struct usb_function **f_ffs[] = {
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+	NULL,
+#endif
+
+#ifdef CONFIG_USB_FUNCTIONFS_ETH
+	NULL,
+#endif
+
+#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
+	NULL,
+#endif
+};
+
+#define N_CONF ARRAY_SIZE(f_ffs)
+
+static int __init gfs_init(void)
+{
+	struct f_fs_opts *opts;
+	int i;
+	int ret = 0;
+
+	ENTER();
+
+	if (func_num < 2) {
+		gfs_single_func = true;
+		func_num = 1;
+	}
+
+	/*
+	 * Allocate in one chunk for easier maintenance
+	 */
+	f_ffs[0] = kcalloc(func_num * N_CONF, sizeof(*f_ffs), GFP_KERNEL);
+	if (!f_ffs[0]) {
+		ret = -ENOMEM;
+		goto no_func;
+	}
+	for (i = 1; i < N_CONF; ++i)
+		f_ffs[i] = f_ffs[0] + i * func_num;
+
+	fi_ffs = kcalloc(func_num, sizeof(*fi_ffs), GFP_KERNEL);
+	if (!fi_ffs) {
+		ret = -ENOMEM;
+		goto no_func;
+	}
+
+	for (i = 0; i < func_num; i++) {
+		fi_ffs[i] = usb_get_function_instance("ffs");
+		if (IS_ERR(fi_ffs[i])) {
+			ret = PTR_ERR(fi_ffs[i]);
+			--i;
+			goto no_dev;
+		}
+		opts = to_f_fs_opts(fi_ffs[i]);
+		if (gfs_single_func)
+			ret = ffs_single_dev(opts->dev);
+		else
+			ret = ffs_name_dev(opts->dev, func_names[i]);
+		if (ret)
+			goto no_dev;
+		opts->dev->ffs_ready_callback = functionfs_ready_callback;
+		opts->dev->ffs_closed_callback = functionfs_closed_callback;
+		opts->dev->ffs_acquire_dev_callback = functionfs_acquire_dev;
+		opts->dev->ffs_release_dev_callback = functionfs_release_dev;
+		opts->no_configfs = true;
+	}
+
+	missing_funcs = func_num;
+
+	return 0;
+no_dev:
+	while (i >= 0)
+		usb_put_function_instance(fi_ffs[i--]);
+	kfree(fi_ffs);
+no_func:
+	kfree(f_ffs[0]);
+	return ret;
+}
+module_init(gfs_init);
+
+static void __exit gfs_exit(void)
+{
+	int i;
+
+	ENTER();
+
+	if (gfs_registered)
+		usb_composite_unregister(&gfs_driver);
+	gfs_registered = false;
+
+	kfree(f_ffs[0]);
+
+	for (i = 0; i < func_num; i++)
+		usb_put_function_instance(fi_ffs[i]);
+
+	kfree(fi_ffs);
+}
+module_exit(gfs_exit);
+
+static void *functionfs_acquire_dev(struct ffs_dev *dev)
+{
+	if (!try_module_get(THIS_MODULE))
+		return ERR_PTR(-ENOENT);
+
+	return NULL;
+}
+
+static void functionfs_release_dev(struct ffs_dev *dev)
+{
+	module_put(THIS_MODULE);
+}
+
+/*
+ * The caller of this function takes ffs_lock
+ */
+static int functionfs_ready_callback(struct ffs_data *ffs)
+{
+	int ret = 0;
+
+	if (--missing_funcs)
+		return 0;
+
+	if (gfs_registered)
+		return -EBUSY;
+
+	gfs_registered = true;
+
+	ret = usb_composite_probe(&gfs_driver);
+	if (unlikely(ret < 0)) {
+		++missing_funcs;
+		gfs_registered = false;
+	}
+
+	return ret;
+}
+
+/*
+ * The caller of this function takes ffs_lock
+ */
+static void functionfs_closed_callback(struct ffs_data *ffs)
+{
+	missing_funcs++;
+
+	if (gfs_registered)
+		usb_composite_unregister(&gfs_driver);
+	gfs_registered = false;
+}
+
+/*
+ * It is assumed that gfs_bind is called from a context where ffs_lock is held
+ */
+static int gfs_bind(struct usb_composite_dev *cdev)
+{
+#if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
+	struct net_device *net;
+#endif
+	int ret, i;
+
+	ENTER();
+
+	if (missing_funcs)
+		return -ENODEV;
+#if defined CONFIG_USB_FUNCTIONFS_ETH
+	if (can_support_ecm(cdev->gadget)) {
+		struct f_ecm_opts *ecm_opts;
+
+		fi_ecm = usb_get_function_instance("ecm");
+		if (IS_ERR(fi_ecm))
+			return PTR_ERR(fi_ecm);
+		ecm_opts = container_of(fi_ecm, struct f_ecm_opts, func_inst);
+		net = ecm_opts->net;
+	} else {
+		struct f_gether_opts *geth_opts;
+
+		fi_geth = usb_get_function_instance("geth");
+		if (IS_ERR(fi_geth))
+			return PTR_ERR(fi_geth);
+		geth_opts = container_of(fi_geth, struct f_gether_opts,
+					 func_inst);
+		net = geth_opts->net;
+	}
+#endif
+
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+	{
+		fi_rndis = usb_get_function_instance("rndis");
+		if (IS_ERR(fi_rndis)) {
+			ret = PTR_ERR(fi_rndis);
+			goto error;
+		}
+#ifndef CONFIG_USB_FUNCTIONFS_ETH
+		net = container_of(fi_rndis, struct f_rndis_opts,
+				   func_inst)->net;
+#endif
+	}
+#endif
+
+#if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
+	gether_set_qmult(net, qmult);
+	if (!gether_set_host_addr(net, host_addr))
+		pr_info("using host ethernet address: %s", host_addr);
+	if (!gether_set_dev_addr(net, dev_addr))
+		pr_info("using self ethernet address: %s", dev_addr);
+#endif
+
+#if defined CONFIG_USB_FUNCTIONFS_RNDIS && defined CONFIG_USB_FUNCTIONFS_ETH
+	gether_set_gadget(net, cdev->gadget);
+	ret = gether_register_netdev(net);
+	if (ret)
+		goto error_rndis;
+
+	if (can_support_ecm(cdev->gadget)) {
+		struct f_ecm_opts *ecm_opts;
+
+		ecm_opts = container_of(fi_ecm, struct f_ecm_opts, func_inst);
+		ecm_opts->bound = true;
+	} else {
+		struct f_gether_opts *geth_opts;
+
+		geth_opts = container_of(fi_geth, struct f_gether_opts,
+					 func_inst);
+		geth_opts->bound = true;
+	}
+
+	rndis_borrow_net(fi_rndis, net);
+#endif
+
+	/* TODO: gstrings_attach? */
+	ret = usb_string_ids_tab(cdev, gfs_strings);
+	if (unlikely(ret < 0))
+		goto error_rndis;
+	gfs_dev_desc.iProduct = gfs_strings[USB_GADGET_PRODUCT_IDX].id;
+
+	if (gadget_is_otg(cdev->gadget) && !gfs_otg_desc[0]) {
+		struct usb_descriptor_header *usb_desc;
+
+		usb_desc = usb_otg_descriptor_alloc(cdev->gadget);
+		if (!usb_desc)
+			goto error_rndis;
+		usb_otg_descriptor_init(cdev->gadget, usb_desc);
+		gfs_otg_desc[0] = usb_desc;
+		gfs_otg_desc[1] = NULL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(gfs_configurations); ++i) {
+		struct gfs_configuration *c = gfs_configurations + i;
+		int sid = USB_GADGET_FIRST_AVAIL_IDX + i;
+
+		c->c.label			= gfs_strings[sid].s;
+		c->c.iConfiguration		= gfs_strings[sid].id;
+		c->c.bConfigurationValue	= 1 + i;
+		c->c.bmAttributes		= USB_CONFIG_ATT_SELFPOWER;
+
+		c->num = i;
+
+		ret = usb_add_config(cdev, &c->c, gfs_do_config);
+		if (unlikely(ret < 0))
+			goto error_unbind;
+	}
+	usb_composite_overwrite_options(cdev, &coverwrite);
+	return 0;
+
+/* TODO */
+error_unbind:
+	kfree(gfs_otg_desc[0]);
+	gfs_otg_desc[0] = NULL;
+error_rndis:
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+	usb_put_function_instance(fi_rndis);
+error:
+#endif
+#if defined CONFIG_USB_FUNCTIONFS_ETH
+	if (can_support_ecm(cdev->gadget))
+		usb_put_function_instance(fi_ecm);
+	else
+		usb_put_function_instance(fi_geth);
+#endif
+	return ret;
+}
+
+/*
+ * It is assumed that gfs_unbind is called from a context where ffs_lock is held
+ */
+static int gfs_unbind(struct usb_composite_dev *cdev)
+{
+	int i;
+
+	ENTER();
+
+
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+	usb_put_function(f_rndis);
+	usb_put_function_instance(fi_rndis);
+#endif
+
+#if defined CONFIG_USB_FUNCTIONFS_ETH
+	if (can_support_ecm(cdev->gadget)) {
+		usb_put_function(f_ecm);
+		usb_put_function_instance(fi_ecm);
+	} else {
+		usb_put_function(f_geth);
+		usb_put_function_instance(fi_geth);
+	}
+#endif
+	for (i = 0; i < N_CONF * func_num; ++i)
+		usb_put_function(*(f_ffs[0] + i));
+
+	kfree(gfs_otg_desc[0]);
+	gfs_otg_desc[0] = NULL;
+
+	return 0;
+}
+
+/*
+ * It is assumed that gfs_do_config is called from a context where
+ * ffs_lock is held
+ */
+static int gfs_do_config(struct usb_configuration *c)
+{
+	struct gfs_configuration *gc =
+		container_of(c, struct gfs_configuration, c);
+	int i;
+	int ret;
+
+	if (missing_funcs)
+		return -ENODEV;
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = gfs_otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	if (gc->eth) {
+		ret = gc->eth(c);
+		if (unlikely(ret < 0))
+			return ret;
+	}
+
+	for (i = 0; i < func_num; i++) {
+		f_ffs[gc->num][i] = usb_get_function(fi_ffs[i]);
+		if (IS_ERR(f_ffs[gc->num][i])) {
+			ret = PTR_ERR(f_ffs[gc->num][i]);
+			goto error;
+		}
+		ret = usb_add_function(c, f_ffs[gc->num][i]);
+		if (ret < 0) {
+			usb_put_function(f_ffs[gc->num][i]);
+			goto error;
+		}
+	}
+
+	/*
+	 * After previous do_configs there may be some invalid
+	 * pointers in c->interface array.  This happens every time
+	 * a user space function with fewer interfaces than a user
+	 * space function that was run before the new one is run.  The
+	 * compasit's set_config() assumes that if there is no more
+	 * then MAX_CONFIG_INTERFACES interfaces in a configuration
+	 * then there is a NULL pointer after the last interface in
+	 * c->interface array.  We need to make sure this is true.
+	 */
+	if (c->next_interface_id < ARRAY_SIZE(c->interface))
+		c->interface[c->next_interface_id] = NULL;
+
+	return 0;
+error:
+	while (--i >= 0) {
+		if (!IS_ERR(f_ffs[gc->num][i]))
+			usb_remove_function(c, f_ffs[gc->num][i]);
+		usb_put_function(f_ffs[gc->num][i]);
+	}
+	return ret;
+}
+
+#ifdef CONFIG_USB_FUNCTIONFS_ETH
+
+static int eth_bind_config(struct usb_configuration *c)
+{
+	int status = 0;
+
+	if (can_support_ecm(c->cdev->gadget)) {
+		f_ecm = usb_get_function(fi_ecm);
+		if (IS_ERR(f_ecm))
+			return PTR_ERR(f_ecm);
+
+		status = usb_add_function(c, f_ecm);
+		if (status < 0)
+			usb_put_function(f_ecm);
+
+	} else {
+		f_geth = usb_get_function(fi_geth);
+		if (IS_ERR(f_geth))
+			return PTR_ERR(f_geth);
+
+		status = usb_add_function(c, f_geth);
+		if (status < 0)
+			usb_put_function(f_geth);
+	}
+	return status;
+}
+
+#endif
+
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+
+static int bind_rndis_config(struct usb_configuration *c)
+{
+	int status = 0;
+
+	f_rndis = usb_get_function(fi_rndis);
+	if (IS_ERR(f_rndis))
+		return PTR_ERR(f_rndis);
+
+	status = usb_add_function(c, f_rndis);
+	if (status < 0)
+		usb_put_function(f_rndis);
+
+	return status;
+}
+
+#endif
diff --git a/drivers/usb/gadget/legacy/gmidi.c b/drivers/usb/gadget/legacy/gmidi.c
new file mode 100644
index 000000000..265c39281
--- /dev/null
+++ b/drivers/usb/gadget/legacy/gmidi.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * gmidi.c -- USB MIDI Gadget Driver
+ *
+ * Copyright (C) 2006 Thumtronics Pty Ltd.
+ * Developed for Thumtronics by Grey Innovation
+ * Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * This code is based in part on:
+ *
+ * Gadget Zero driver, Copyright (C) 2003-2004 David Brownell.
+ * USB Audio driver, Copyright (C) 2002 by Takashi Iwai.
+ * USB MIDI driver, Copyright (C) 2002-2005 Clemens Ladisch.
+ *
+ * Refer to the USB Device Class Definition for MIDI Devices:
+ * http://www.usb.org/developers/devclass_docs/midi10.pdf
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <sound/initval.h>
+
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+
+#include "u_midi.h"
+
+/*-------------------------------------------------------------------------*/
+
+MODULE_AUTHOR("Ben Williamson");
+MODULE_LICENSE("GPL v2");
+
+static const char longname[] = "MIDI Gadget";
+
+USB_GADGET_COMPOSITE_OPTIONS();
+
+static int index = SNDRV_DEFAULT_IDX1;
+module_param(index, int, S_IRUGO);
+MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter.");
+
+static char *id = SNDRV_DEFAULT_STR1;
+module_param(id, charp, S_IRUGO);
+MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter.");
+
+static unsigned int buflen = 512;
+module_param(buflen, uint, S_IRUGO);
+MODULE_PARM_DESC(buflen, "MIDI buffer length");
+
+static unsigned int qlen = 32;
+module_param(qlen, uint, S_IRUGO);
+MODULE_PARM_DESC(qlen, "USB read and write request queue length");
+
+static unsigned int in_ports = 1;
+module_param(in_ports, uint, S_IRUGO);
+MODULE_PARM_DESC(in_ports, "Number of MIDI input ports");
+
+static unsigned int out_ports = 1;
+module_param(out_ports, uint, S_IRUGO);
+MODULE_PARM_DESC(out_ports, "Number of MIDI output ports");
+
+/* Thanks to Grey Innovation for donating this product ID.
+ *
+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
+#define DRIVER_VENDOR_NUM	0x17b3		/* Grey Innovation */
+#define DRIVER_PRODUCT_NUM	0x0004		/* Linux-USB "MIDI Gadget" */
+
+/* string IDs are assigned dynamically */
+
+#define STRING_DESCRIPTION_IDX		USB_GADGET_FIRST_AVAIL_IDX
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		USB_DT_DEVICE_SIZE,
+	.bDescriptorType =	USB_DT_DEVICE,
+	/* .bcdUSB = DYNAMIC */
+	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
+	.idVendor =		cpu_to_le16(DRIVER_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(DRIVER_PRODUCT_NUM),
+	/* .iManufacturer =	DYNAMIC */
+	/* .iProduct =		DYNAMIC */
+	.bNumConfigurations =	1,
+};
+
+static struct usb_string strings_dev[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s	= "Grey Innovation",
+	[USB_GADGET_PRODUCT_IDX].s	= "MIDI Gadget",
+	[USB_GADGET_SERIAL_IDX].s	= "",
+	[STRING_DESCRIPTION_IDX].s	= "MIDI",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+static struct usb_function_instance *fi_midi;
+static struct usb_function *f_midi;
+
+static int midi_unbind(struct usb_composite_dev *dev)
+{
+	usb_put_function(f_midi);
+	usb_put_function_instance(fi_midi);
+	return 0;
+}
+
+static struct usb_configuration midi_config = {
+	.label		= "MIDI Gadget",
+	.bConfigurationValue = 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes	= USB_CONFIG_ATT_ONE,
+	.MaxPower	= CONFIG_USB_GADGET_VBUS_DRAW,
+};
+
+static int midi_bind_config(struct usb_configuration *c)
+{
+	int status;
+
+	f_midi = usb_get_function(fi_midi);
+	if (IS_ERR(f_midi))
+		return PTR_ERR(f_midi);
+
+	status = usb_add_function(c, f_midi);
+	if (status < 0) {
+		usb_put_function(f_midi);
+		return status;
+	}
+
+	return 0;
+}
+
+static int midi_bind(struct usb_composite_dev *cdev)
+{
+	struct f_midi_opts *midi_opts;
+	int status;
+
+	fi_midi = usb_get_function_instance("midi");
+	if (IS_ERR(fi_midi))
+		return PTR_ERR(fi_midi);
+
+	midi_opts = container_of(fi_midi, struct f_midi_opts, func_inst);
+	midi_opts->index = index;
+	midi_opts->id = id;
+	midi_opts->in_ports = in_ports;
+	midi_opts->out_ports = out_ports;
+	midi_opts->buflen = buflen;
+	midi_opts->qlen = qlen;
+
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (status < 0)
+		goto put;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+	midi_config.iConfiguration = strings_dev[STRING_DESCRIPTION_IDX].id;
+
+	status = usb_add_config(cdev, &midi_config, midi_bind_config);
+	if (status < 0)
+		goto put;
+	usb_composite_overwrite_options(cdev, &coverwrite);
+	pr_info("%s\n", longname);
+	return 0;
+put:
+	usb_put_function_instance(fi_midi);
+	return status;
+}
+
+static struct usb_composite_driver midi_driver = {
+	.name		= longname,
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_HIGH,
+	.bind		= midi_bind,
+	.unbind		= midi_unbind,
+};
+
+module_usb_composite_driver(midi_driver);
diff --git a/drivers/usb/gadget/legacy/hid.c b/drivers/usb/gadget/legacy/hid.c
new file mode 100644
index 000000000..1187ee4f3
--- /dev/null
+++ b/drivers/usb/gadget/legacy/hid.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * hid.c -- HID Composite driver
+ *
+ * Based on multi.c
+ *
+ * Copyright (C) 2010 Fabien Chouteau <fabien.chouteau@barco.com>
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/g_hid.h>
+
+#define DRIVER_DESC		"HID Gadget"
+#define DRIVER_VERSION		"2010/03/16"
+
+#include "u_hid.h"
+
+/*-------------------------------------------------------------------------*/
+
+#define HIDG_VENDOR_NUM		0x0525	/* XXX NetChip */
+#define HIDG_PRODUCT_NUM	0xa4ac	/* Linux-USB HID gadget */
+
+/*-------------------------------------------------------------------------*/
+
+struct hidg_func_node {
+	struct usb_function_instance *fi;
+	struct usb_function *f;
+	struct list_head node;
+	struct hidg_func_descriptor *func;
+};
+
+static LIST_HEAD(hidg_func_list);
+
+/*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	/* .bcdUSB = DYNAMIC */
+
+	/* .bDeviceClass =		USB_CLASS_COMM, */
+	/* .bDeviceSubClass =	0, */
+	/* .bDeviceProtocol =	0, */
+	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
+	.bDeviceSubClass =	0,
+	.bDeviceProtocol =	0,
+	/* .bMaxPacketSize0 = f(hardware) */
+
+	/* Vendor and product id can be overridden by module parameters.  */
+	.idVendor =		cpu_to_le16(HIDG_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(HIDG_PRODUCT_NUM),
+	/* .bcdDevice = f(hardware) */
+	/* .iManufacturer = DYNAMIC */
+	/* .iProduct = DYNAMIC */
+	/* NO SERIAL NUMBER */
+	.bNumConfigurations =	1,
+};
+
+static const struct usb_descriptor_header *otg_desc[2];
+
+/* string IDs are assigned dynamically */
+static struct usb_string strings_dev[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+
+
+/****************************** Configurations ******************************/
+
+static int do_config(struct usb_configuration *c)
+{
+	struct hidg_func_node *e, *n;
+	int status = 0;
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	list_for_each_entry(e, &hidg_func_list, node) {
+		e->f = usb_get_function(e->fi);
+		if (IS_ERR(e->f)) {
+			status = PTR_ERR(e->f);
+			goto put;
+		}
+		status = usb_add_function(c, e->f);
+		if (status < 0) {
+			usb_put_function(e->f);
+			goto put;
+		}
+	}
+
+	return 0;
+put:
+	list_for_each_entry(n, &hidg_func_list, node) {
+		if (n == e)
+			break;
+		usb_remove_function(c, n->f);
+		usb_put_function(n->f);
+	}
+	return status;
+}
+
+static struct usb_configuration config_driver = {
+	.label			= "HID Gadget",
+	.bConfigurationValue	= 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+
+/****************************** Gadget Bind ******************************/
+
+static int hid_bind(struct usb_composite_dev *cdev)
+{
+	struct usb_gadget *gadget = cdev->gadget;
+	struct list_head *tmp;
+	struct hidg_func_node *n = NULL, *m, *iter_n;
+	struct f_hid_opts *hid_opts;
+	int status, funcs = 0;
+
+	list_for_each(tmp, &hidg_func_list)
+		funcs++;
+
+	if (!funcs)
+		return -ENODEV;
+
+	list_for_each_entry(iter_n, &hidg_func_list, node) {
+		iter_n->fi = usb_get_function_instance("hid");
+		if (IS_ERR(iter_n->fi)) {
+			status = PTR_ERR(iter_n->fi);
+			n = iter_n;
+			goto put;
+		}
+		hid_opts = container_of(iter_n->fi, struct f_hid_opts, func_inst);
+		hid_opts->subclass = iter_n->func->subclass;
+		hid_opts->protocol = iter_n->func->protocol;
+		hid_opts->report_length = iter_n->func->report_length;
+		hid_opts->report_desc_length = iter_n->func->report_desc_length;
+		hid_opts->report_desc = iter_n->func->report_desc;
+	}
+
+
+	/* Allocate string descriptor numbers ... note that string
+	 * contents can be overridden by the composite_dev glue.
+	 */
+
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (status < 0)
+		goto put;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+
+	if (gadget_is_otg(gadget) && !otg_desc[0]) {
+		struct usb_descriptor_header *usb_desc;
+
+		usb_desc = usb_otg_descriptor_alloc(gadget);
+		if (!usb_desc) {
+			status = -ENOMEM;
+			goto put;
+		}
+		usb_otg_descriptor_init(gadget, usb_desc);
+		otg_desc[0] = usb_desc;
+		otg_desc[1] = NULL;
+	}
+
+	/* register our configuration */
+	status = usb_add_config(cdev, &config_driver, do_config);
+	if (status < 0)
+		goto free_otg_desc;
+
+	usb_composite_overwrite_options(cdev, &coverwrite);
+	dev_info(&gadget->dev, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
+
+	return 0;
+
+free_otg_desc:
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+put:
+	list_for_each_entry(m, &hidg_func_list, node) {
+		if (m == n)
+			break;
+		usb_put_function_instance(m->fi);
+	}
+	return status;
+}
+
+static int hid_unbind(struct usb_composite_dev *cdev)
+{
+	struct hidg_func_node *n;
+
+	list_for_each_entry(n, &hidg_func_list, node) {
+		usb_put_function(n->f);
+		usb_put_function_instance(n->fi);
+	}
+
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+
+	return 0;
+}
+
+static int hidg_plat_driver_probe(struct platform_device *pdev)
+{
+	struct hidg_func_descriptor *func = dev_get_platdata(&pdev->dev);
+	struct hidg_func_node *entry;
+
+	if (!func) {
+		dev_err(&pdev->dev, "Platform data missing\n");
+		return -ENODEV;
+	}
+
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+
+	entry->func = func;
+	list_add_tail(&entry->node, &hidg_func_list);
+
+	return 0;
+}
+
+static int hidg_plat_driver_remove(struct platform_device *pdev)
+{
+	struct hidg_func_node *e, *n;
+
+	list_for_each_entry_safe(e, n, &hidg_func_list, node) {
+		list_del(&e->node);
+		kfree(e);
+	}
+
+	return 0;
+}
+
+
+/****************************** Some noise ******************************/
+
+
+static struct usb_composite_driver hidg_driver = {
+	.name		= "g_hid",
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_HIGH,
+	.bind		= hid_bind,
+	.unbind		= hid_unbind,
+};
+
+static struct platform_driver hidg_plat_driver = {
+	.remove		= hidg_plat_driver_remove,
+	.driver		= {
+		.name	= "hidg",
+	},
+};
+
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Fabien Chouteau, Peter Korsgaard");
+MODULE_LICENSE("GPL");
+
+static int __init hidg_init(void)
+{
+	int status;
+
+	status = platform_driver_probe(&hidg_plat_driver,
+				hidg_plat_driver_probe);
+	if (status < 0)
+		return status;
+
+	status = usb_composite_probe(&hidg_driver);
+	if (status < 0)
+		platform_driver_unregister(&hidg_plat_driver);
+
+	return status;
+}
+module_init(hidg_init);
+
+static void __exit hidg_cleanup(void)
+{
+	usb_composite_unregister(&hidg_driver);
+	platform_driver_unregister(&hidg_plat_driver);
+}
+module_exit(hidg_cleanup);
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
new file mode 100644
index 000000000..d605bc2e7
--- /dev/null
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -0,0 +1,2137 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * inode.c -- user mode filesystem api for usb gadget controllers
+ *
+ * Copyright (C) 2003-2004 David Brownell
+ * Copyright (C) 2003 Agilent Technologies
+ */
+
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/fs_context.h>
+#include <linux/pagemap.h>
+#include <linux/uts.h>
+#include <linux/wait.h>
+#include <linux/compiler.h>
+#include <linux/uaccess.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/kthread.h>
+#include <linux/aio.h>
+#include <linux/uio.h>
+#include <linux/refcount.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+
+#include <linux/usb/gadgetfs.h>
+#include <linux/usb/gadget.h>
+
+
+/*
+ * The gadgetfs API maps each endpoint to a file descriptor so that you
+ * can use standard synchronous read/write calls for I/O.  There's some
+ * O_NONBLOCK and O_ASYNC/FASYNC style i/o support.  Example usermode
+ * drivers show how this works in practice.  You can also use AIO to
+ * eliminate I/O gaps between requests, to help when streaming data.
+ *
+ * Key parts that must be USB-specific are protocols defining how the
+ * read/write operations relate to the hardware state machines.  There
+ * are two types of files.  One type is for the device, implementing ep0.
+ * The other type is for each IN or OUT endpoint.  In both cases, the
+ * user mode driver must configure the hardware before using it.
+ *
+ * - First, dev_config() is called when /dev/gadget/$CHIP is configured
+ *   (by writing configuration and device descriptors).  Afterwards it
+ *   may serve as a source of device events, used to handle all control
+ *   requests other than basic enumeration.
+ *
+ * - Then, after a SET_CONFIGURATION control request, ep_config() is
+ *   called when each /dev/gadget/ep* file is configured (by writing
+ *   endpoint descriptors).  Afterwards these files are used to write()
+ *   IN data or to read() OUT data.  To halt the endpoint, a "wrong
+ *   direction" request is issued (like reading an IN endpoint).
+ *
+ * Unlike "usbfs" the only ioctl()s are for things that are rare, and maybe
+ * not possible on all hardware.  For example, precise fault handling with
+ * respect to data left in endpoint fifos after aborted operations; or
+ * selective clearing of endpoint halts, to implement SET_INTERFACE.
+ */
+
+#define	DRIVER_DESC	"USB Gadget filesystem"
+#define	DRIVER_VERSION	"24 Aug 2004"
+
+static const char driver_desc [] = DRIVER_DESC;
+static const char shortname [] = "gadgetfs";
+
+MODULE_DESCRIPTION (DRIVER_DESC);
+MODULE_AUTHOR ("David Brownell");
+MODULE_LICENSE ("GPL");
+
+static int ep_open(struct inode *, struct file *);
+
+
+/*----------------------------------------------------------------------*/
+
+#define GADGETFS_MAGIC		0xaee71ee7
+
+/* /dev/gadget/$CHIP represents ep0 and the whole device */
+enum ep0_state {
+	/* DISABLED is the initial state. */
+	STATE_DEV_DISABLED = 0,
+
+	/* Only one open() of /dev/gadget/$CHIP; only one file tracks
+	 * ep0/device i/o modes and binding to the controller.  Driver
+	 * must always write descriptors to initialize the device, then
+	 * the device becomes UNCONNECTED until enumeration.
+	 */
+	STATE_DEV_OPENED,
+
+	/* From then on, ep0 fd is in either of two basic modes:
+	 * - (UN)CONNECTED: read usb_gadgetfs_event(s) from it
+	 * - SETUP: read/write will transfer control data and succeed;
+	 *   or if "wrong direction", performs protocol stall
+	 */
+	STATE_DEV_UNCONNECTED,
+	STATE_DEV_CONNECTED,
+	STATE_DEV_SETUP,
+
+	/* UNBOUND means the driver closed ep0, so the device won't be
+	 * accessible again (DEV_DISABLED) until all fds are closed.
+	 */
+	STATE_DEV_UNBOUND,
+};
+
+/* enough for the whole queue: most events invalidate others */
+#define	N_EVENT			5
+
+#define RBUF_SIZE		256
+
+struct dev_data {
+	spinlock_t			lock;
+	refcount_t			count;
+	int				udc_usage;
+	enum ep0_state			state;		/* P: lock */
+	struct usb_gadgetfs_event	event [N_EVENT];
+	unsigned			ev_next;
+	struct fasync_struct		*fasync;
+	u8				current_config;
+
+	/* drivers reading ep0 MUST handle control requests (SETUP)
+	 * reported that way; else the host will time out.
+	 */
+	unsigned			usermode_setup : 1,
+					setup_in : 1,
+					setup_can_stall : 1,
+					setup_out_ready : 1,
+					setup_out_error : 1,
+					setup_abort : 1,
+					gadget_registered : 1;
+	unsigned			setup_wLength;
+
+	/* the rest is basically write-once */
+	struct usb_config_descriptor	*config, *hs_config;
+	struct usb_device_descriptor	*dev;
+	struct usb_request		*req;
+	struct usb_gadget		*gadget;
+	struct list_head		epfiles;
+	void				*buf;
+	wait_queue_head_t		wait;
+	struct super_block		*sb;
+	struct dentry			*dentry;
+
+	/* except this scratch i/o buffer for ep0 */
+	u8				rbuf[RBUF_SIZE];
+};
+
+static inline void get_dev (struct dev_data *data)
+{
+	refcount_inc (&data->count);
+}
+
+static void put_dev (struct dev_data *data)
+{
+	if (likely (!refcount_dec_and_test (&data->count)))
+		return;
+	/* needs no more cleanup */
+	BUG_ON (waitqueue_active (&data->wait));
+	kfree (data);
+}
+
+static struct dev_data *dev_new (void)
+{
+	struct dev_data		*dev;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return NULL;
+	dev->state = STATE_DEV_DISABLED;
+	refcount_set (&dev->count, 1);
+	spin_lock_init (&dev->lock);
+	INIT_LIST_HEAD (&dev->epfiles);
+	init_waitqueue_head (&dev->wait);
+	return dev;
+}
+
+/*----------------------------------------------------------------------*/
+
+/* other /dev/gadget/$ENDPOINT files represent endpoints */
+enum ep_state {
+	STATE_EP_DISABLED = 0,
+	STATE_EP_READY,
+	STATE_EP_ENABLED,
+	STATE_EP_UNBOUND,
+};
+
+struct ep_data {
+	struct mutex			lock;
+	enum ep_state			state;
+	refcount_t			count;
+	struct dev_data			*dev;
+	/* must hold dev->lock before accessing ep or req */
+	struct usb_ep			*ep;
+	struct usb_request		*req;
+	ssize_t				status;
+	char				name [16];
+	struct usb_endpoint_descriptor	desc, hs_desc;
+	struct list_head		epfiles;
+	wait_queue_head_t		wait;
+	struct dentry			*dentry;
+};
+
+static inline void get_ep (struct ep_data *data)
+{
+	refcount_inc (&data->count);
+}
+
+static void put_ep (struct ep_data *data)
+{
+	if (likely (!refcount_dec_and_test (&data->count)))
+		return;
+	put_dev (data->dev);
+	/* needs no more cleanup */
+	BUG_ON (!list_empty (&data->epfiles));
+	BUG_ON (waitqueue_active (&data->wait));
+	kfree (data);
+}
+
+/*----------------------------------------------------------------------*/
+
+/* most "how to use the hardware" policy choices are in userspace:
+ * mapping endpoint roles (which the driver needs) to the capabilities
+ * which the usb controller has.  most of those capabilities are exposed
+ * implicitly, starting with the driver name and then endpoint names.
+ */
+
+static const char *CHIP;
+static DEFINE_MUTEX(sb_mutex);		/* Serialize superblock operations */
+
+/*----------------------------------------------------------------------*/
+
+/* NOTE:  don't use dev_printk calls before binding to the gadget
+ * at the end of ep0 configuration, or after unbind.
+ */
+
+/* too wordy: dev_printk(level , &(d)->gadget->dev , fmt , ## args) */
+#define xprintk(d,level,fmt,args...) \
+	printk(level "%s: " fmt , shortname , ## args)
+
+#ifdef DEBUG
+#define DBG(dev,fmt,args...) \
+	xprintk(dev , KERN_DEBUG , fmt , ## args)
+#else
+#define DBG(dev,fmt,args...) \
+	do { } while (0)
+#endif /* DEBUG */
+
+#ifdef VERBOSE_DEBUG
+#define VDEBUG	DBG
+#else
+#define VDEBUG(dev,fmt,args...) \
+	do { } while (0)
+#endif /* DEBUG */
+
+#define ERROR(dev,fmt,args...) \
+	xprintk(dev , KERN_ERR , fmt , ## args)
+#define INFO(dev,fmt,args...) \
+	xprintk(dev , KERN_INFO , fmt , ## args)
+
+
+/*----------------------------------------------------------------------*/
+
+/* SYNCHRONOUS ENDPOINT OPERATIONS (bulk/intr/iso)
+ *
+ * After opening, configure non-control endpoints.  Then use normal
+ * stream read() and write() requests; and maybe ioctl() to get more
+ * precise FIFO status when recovering from cancellation.
+ */
+
+static void epio_complete (struct usb_ep *ep, struct usb_request *req)
+{
+	struct ep_data	*epdata = ep->driver_data;
+
+	if (!req->context)
+		return;
+	if (req->status)
+		epdata->status = req->status;
+	else
+		epdata->status = req->actual;
+	complete ((struct completion *)req->context);
+}
+
+/* tasklock endpoint, returning when it's connected.
+ * still need dev->lock to use epdata->ep.
+ */
+static int
+get_ready_ep (unsigned f_flags, struct ep_data *epdata, bool is_write)
+{
+	int	val;
+
+	if (f_flags & O_NONBLOCK) {
+		if (!mutex_trylock(&epdata->lock))
+			goto nonblock;
+		if (epdata->state != STATE_EP_ENABLED &&
+		    (!is_write || epdata->state != STATE_EP_READY)) {
+			mutex_unlock(&epdata->lock);
+nonblock:
+			val = -EAGAIN;
+		} else
+			val = 0;
+		return val;
+	}
+
+	val = mutex_lock_interruptible(&epdata->lock);
+	if (val < 0)
+		return val;
+
+	switch (epdata->state) {
+	case STATE_EP_ENABLED:
+		return 0;
+	case STATE_EP_READY:			/* not configured yet */
+		if (is_write)
+			return 0;
+		fallthrough;
+	case STATE_EP_UNBOUND:			/* clean disconnect */
+		break;
+	// case STATE_EP_DISABLED:		/* "can't happen" */
+	default:				/* error! */
+		pr_debug ("%s: ep %p not available, state %d\n",
+				shortname, epdata, epdata->state);
+	}
+	mutex_unlock(&epdata->lock);
+	return -ENODEV;
+}
+
+static ssize_t
+ep_io (struct ep_data *epdata, void *buf, unsigned len)
+{
+	DECLARE_COMPLETION_ONSTACK (done);
+	int value;
+
+	spin_lock_irq (&epdata->dev->lock);
+	if (likely (epdata->ep != NULL)) {
+		struct usb_request	*req = epdata->req;
+
+		req->context = &done;
+		req->complete = epio_complete;
+		req->buf = buf;
+		req->length = len;
+		value = usb_ep_queue (epdata->ep, req, GFP_ATOMIC);
+	} else
+		value = -ENODEV;
+	spin_unlock_irq (&epdata->dev->lock);
+
+	if (likely (value == 0)) {
+		value = wait_for_completion_interruptible(&done);
+		if (value != 0) {
+			spin_lock_irq (&epdata->dev->lock);
+			if (likely (epdata->ep != NULL)) {
+				DBG (epdata->dev, "%s i/o interrupted\n",
+						epdata->name);
+				usb_ep_dequeue (epdata->ep, epdata->req);
+				spin_unlock_irq (&epdata->dev->lock);
+
+				wait_for_completion(&done);
+				if (epdata->status == -ECONNRESET)
+					epdata->status = -EINTR;
+			} else {
+				spin_unlock_irq (&epdata->dev->lock);
+
+				DBG (epdata->dev, "endpoint gone\n");
+				wait_for_completion(&done);
+				epdata->status = -ENODEV;
+			}
+		}
+		return epdata->status;
+	}
+	return value;
+}
+
+static int
+ep_release (struct inode *inode, struct file *fd)
+{
+	struct ep_data		*data = fd->private_data;
+	int value;
+
+	value = mutex_lock_interruptible(&data->lock);
+	if (value < 0)
+		return value;
+
+	/* clean up if this can be reopened */
+	if (data->state != STATE_EP_UNBOUND) {
+		data->state = STATE_EP_DISABLED;
+		data->desc.bDescriptorType = 0;
+		data->hs_desc.bDescriptorType = 0;
+		usb_ep_disable(data->ep);
+	}
+	mutex_unlock(&data->lock);
+	put_ep (data);
+	return 0;
+}
+
+static long ep_ioctl(struct file *fd, unsigned code, unsigned long value)
+{
+	struct ep_data		*data = fd->private_data;
+	int			status;
+
+	if ((status = get_ready_ep (fd->f_flags, data, false)) < 0)
+		return status;
+
+	spin_lock_irq (&data->dev->lock);
+	if (likely (data->ep != NULL)) {
+		switch (code) {
+		case GADGETFS_FIFO_STATUS:
+			status = usb_ep_fifo_status (data->ep);
+			break;
+		case GADGETFS_FIFO_FLUSH:
+			usb_ep_fifo_flush (data->ep);
+			break;
+		case GADGETFS_CLEAR_HALT:
+			status = usb_ep_clear_halt (data->ep);
+			break;
+		default:
+			status = -ENOTTY;
+		}
+	} else
+		status = -ENODEV;
+	spin_unlock_irq (&data->dev->lock);
+	mutex_unlock(&data->lock);
+	return status;
+}
+
+/*----------------------------------------------------------------------*/
+
+/* ASYNCHRONOUS ENDPOINT I/O OPERATIONS (bulk/intr/iso) */
+
+struct kiocb_priv {
+	struct usb_request	*req;
+	struct ep_data		*epdata;
+	struct kiocb		*iocb;
+	struct mm_struct	*mm;
+	struct work_struct	work;
+	void			*buf;
+	struct iov_iter		to;
+	const void		*to_free;
+	unsigned		actual;
+};
+
+static int ep_aio_cancel(struct kiocb *iocb)
+{
+	struct kiocb_priv	*priv = iocb->private;
+	struct ep_data		*epdata;
+	int			value;
+
+	local_irq_disable();
+	epdata = priv->epdata;
+	// spin_lock(&epdata->dev->lock);
+	if (likely(epdata && epdata->ep && priv->req))
+		value = usb_ep_dequeue (epdata->ep, priv->req);
+	else
+		value = -EINVAL;
+	// spin_unlock(&epdata->dev->lock);
+	local_irq_enable();
+
+	return value;
+}
+
+static void ep_user_copy_worker(struct work_struct *work)
+{
+	struct kiocb_priv *priv = container_of(work, struct kiocb_priv, work);
+	struct mm_struct *mm = priv->mm;
+	struct kiocb *iocb = priv->iocb;
+	size_t ret;
+
+	kthread_use_mm(mm);
+	ret = copy_to_iter(priv->buf, priv->actual, &priv->to);
+	kthread_unuse_mm(mm);
+	if (!ret)
+		ret = -EFAULT;
+
+	/* completing the iocb can drop the ctx and mm, don't touch mm after */
+	iocb->ki_complete(iocb, ret);
+
+	kfree(priv->buf);
+	kfree(priv->to_free);
+	kfree(priv);
+}
+
+static void ep_aio_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct kiocb		*iocb = req->context;
+	struct kiocb_priv	*priv = iocb->private;
+	struct ep_data		*epdata = priv->epdata;
+
+	/* lock against disconnect (and ideally, cancel) */
+	spin_lock(&epdata->dev->lock);
+	priv->req = NULL;
+	priv->epdata = NULL;
+
+	/* if this was a write or a read returning no data then we
+	 * don't need to copy anything to userspace, so we can
+	 * complete the aio request immediately.
+	 */
+	if (priv->to_free == NULL || unlikely(req->actual == 0)) {
+		kfree(req->buf);
+		kfree(priv->to_free);
+		kfree(priv);
+		iocb->private = NULL;
+		iocb->ki_complete(iocb,
+				req->actual ? req->actual : (long)req->status);
+	} else {
+		/* ep_copy_to_user() won't report both; we hide some faults */
+		if (unlikely(0 != req->status))
+			DBG(epdata->dev, "%s fault %d len %d\n",
+				ep->name, req->status, req->actual);
+
+		priv->buf = req->buf;
+		priv->actual = req->actual;
+		INIT_WORK(&priv->work, ep_user_copy_worker);
+		schedule_work(&priv->work);
+	}
+
+	usb_ep_free_request(ep, req);
+	spin_unlock(&epdata->dev->lock);
+	put_ep(epdata);
+}
+
+static ssize_t ep_aio(struct kiocb *iocb,
+		      struct kiocb_priv *priv,
+		      struct ep_data *epdata,
+		      char *buf,
+		      size_t len)
+{
+	struct usb_request *req;
+	ssize_t value;
+
+	iocb->private = priv;
+	priv->iocb = iocb;
+
+	kiocb_set_cancel_fn(iocb, ep_aio_cancel);
+	get_ep(epdata);
+	priv->epdata = epdata;
+	priv->actual = 0;
+	priv->mm = current->mm; /* mm teardown waits for iocbs in exit_aio() */
+
+	/* each kiocb is coupled to one usb_request, but we can't
+	 * allocate or submit those if the host disconnected.
+	 */
+	spin_lock_irq(&epdata->dev->lock);
+	value = -ENODEV;
+	if (unlikely(epdata->ep == NULL))
+		goto fail;
+
+	req = usb_ep_alloc_request(epdata->ep, GFP_ATOMIC);
+	value = -ENOMEM;
+	if (unlikely(!req))
+		goto fail;
+
+	priv->req = req;
+	req->buf = buf;
+	req->length = len;
+	req->complete = ep_aio_complete;
+	req->context = iocb;
+	value = usb_ep_queue(epdata->ep, req, GFP_ATOMIC);
+	if (unlikely(0 != value)) {
+		usb_ep_free_request(epdata->ep, req);
+		goto fail;
+	}
+	spin_unlock_irq(&epdata->dev->lock);
+	return -EIOCBQUEUED;
+
+fail:
+	spin_unlock_irq(&epdata->dev->lock);
+	kfree(priv->to_free);
+	kfree(priv);
+	put_ep(epdata);
+	return value;
+}
+
+static ssize_t
+ep_read_iter(struct kiocb *iocb, struct iov_iter *to)
+{
+	struct file *file = iocb->ki_filp;
+	struct ep_data *epdata = file->private_data;
+	size_t len = iov_iter_count(to);
+	ssize_t value;
+	char *buf;
+
+	if ((value = get_ready_ep(file->f_flags, epdata, false)) < 0)
+		return value;
+
+	/* halt any endpoint by doing a "wrong direction" i/o call */
+	if (usb_endpoint_dir_in(&epdata->desc)) {
+		if (usb_endpoint_xfer_isoc(&epdata->desc) ||
+		    !is_sync_kiocb(iocb)) {
+			mutex_unlock(&epdata->lock);
+			return -EINVAL;
+		}
+		DBG (epdata->dev, "%s halt\n", epdata->name);
+		spin_lock_irq(&epdata->dev->lock);
+		if (likely(epdata->ep != NULL))
+			usb_ep_set_halt(epdata->ep);
+		spin_unlock_irq(&epdata->dev->lock);
+		mutex_unlock(&epdata->lock);
+		return -EBADMSG;
+	}
+
+	buf = kmalloc(len, GFP_KERNEL);
+	if (unlikely(!buf)) {
+		mutex_unlock(&epdata->lock);
+		return -ENOMEM;
+	}
+	if (is_sync_kiocb(iocb)) {
+		value = ep_io(epdata, buf, len);
+		if (value >= 0 && (copy_to_iter(buf, value, to) != value))
+			value = -EFAULT;
+	} else {
+		struct kiocb_priv *priv = kzalloc(sizeof *priv, GFP_KERNEL);
+		value = -ENOMEM;
+		if (!priv)
+			goto fail;
+		priv->to_free = dup_iter(&priv->to, to, GFP_KERNEL);
+		if (!priv->to_free) {
+			kfree(priv);
+			goto fail;
+		}
+		value = ep_aio(iocb, priv, epdata, buf, len);
+		if (value == -EIOCBQUEUED)
+			buf = NULL;
+	}
+fail:
+	kfree(buf);
+	mutex_unlock(&epdata->lock);
+	return value;
+}
+
+static ssize_t ep_config(struct ep_data *, const char *, size_t);
+
+static ssize_t
+ep_write_iter(struct kiocb *iocb, struct iov_iter *from)
+{
+	struct file *file = iocb->ki_filp;
+	struct ep_data *epdata = file->private_data;
+	size_t len = iov_iter_count(from);
+	bool configured;
+	ssize_t value;
+	char *buf;
+
+	if ((value = get_ready_ep(file->f_flags, epdata, true)) < 0)
+		return value;
+
+	configured = epdata->state == STATE_EP_ENABLED;
+
+	/* halt any endpoint by doing a "wrong direction" i/o call */
+	if (configured && !usb_endpoint_dir_in(&epdata->desc)) {
+		if (usb_endpoint_xfer_isoc(&epdata->desc) ||
+		    !is_sync_kiocb(iocb)) {
+			mutex_unlock(&epdata->lock);
+			return -EINVAL;
+		}
+		DBG (epdata->dev, "%s halt\n", epdata->name);
+		spin_lock_irq(&epdata->dev->lock);
+		if (likely(epdata->ep != NULL))
+			usb_ep_set_halt(epdata->ep);
+		spin_unlock_irq(&epdata->dev->lock);
+		mutex_unlock(&epdata->lock);
+		return -EBADMSG;
+	}
+
+	buf = kmalloc(len, GFP_KERNEL);
+	if (unlikely(!buf)) {
+		mutex_unlock(&epdata->lock);
+		return -ENOMEM;
+	}
+
+	if (unlikely(!copy_from_iter_full(buf, len, from))) {
+		value = -EFAULT;
+		goto out;
+	}
+
+	if (unlikely(!configured)) {
+		value = ep_config(epdata, buf, len);
+	} else if (is_sync_kiocb(iocb)) {
+		value = ep_io(epdata, buf, len);
+	} else {
+		struct kiocb_priv *priv = kzalloc(sizeof *priv, GFP_KERNEL);
+		value = -ENOMEM;
+		if (priv) {
+			value = ep_aio(iocb, priv, epdata, buf, len);
+			if (value == -EIOCBQUEUED)
+				buf = NULL;
+		}
+	}
+out:
+	kfree(buf);
+	mutex_unlock(&epdata->lock);
+	return value;
+}
+
+/*----------------------------------------------------------------------*/
+
+/* used after endpoint configuration */
+static const struct file_operations ep_io_operations = {
+	.owner =	THIS_MODULE,
+
+	.open =		ep_open,
+	.release =	ep_release,
+	.llseek =	no_llseek,
+	.unlocked_ioctl = ep_ioctl,
+	.read_iter =	ep_read_iter,
+	.write_iter =	ep_write_iter,
+};
+
+/* ENDPOINT INITIALIZATION
+ *
+ *     fd = open ("/dev/gadget/$ENDPOINT", O_RDWR)
+ *     status = write (fd, descriptors, sizeof descriptors)
+ *
+ * That write establishes the endpoint configuration, configuring
+ * the controller to process bulk, interrupt, or isochronous transfers
+ * at the right maxpacket size, and so on.
+ *
+ * The descriptors are message type 1, identified by a host order u32
+ * at the beginning of what's written.  Descriptor order is: full/low
+ * speed descriptor, then optional high speed descriptor.
+ */
+static ssize_t
+ep_config (struct ep_data *data, const char *buf, size_t len)
+{
+	struct usb_ep		*ep;
+	u32			tag;
+	int			value, length = len;
+
+	if (data->state != STATE_EP_READY) {
+		value = -EL2HLT;
+		goto fail;
+	}
+
+	value = len;
+	if (len < USB_DT_ENDPOINT_SIZE + 4)
+		goto fail0;
+
+	/* we might need to change message format someday */
+	memcpy(&tag, buf, 4);
+	if (tag != 1) {
+		DBG(data->dev, "config %s, bad tag %d\n", data->name, tag);
+		goto fail0;
+	}
+	buf += 4;
+	len -= 4;
+
+	/* NOTE:  audio endpoint extensions not accepted here;
+	 * just don't include the extra bytes.
+	 */
+
+	/* full/low speed descriptor, then high speed */
+	memcpy(&data->desc, buf, USB_DT_ENDPOINT_SIZE);
+	if (data->desc.bLength != USB_DT_ENDPOINT_SIZE
+			|| data->desc.bDescriptorType != USB_DT_ENDPOINT)
+		goto fail0;
+	if (len != USB_DT_ENDPOINT_SIZE) {
+		if (len != 2 * USB_DT_ENDPOINT_SIZE)
+			goto fail0;
+		memcpy(&data->hs_desc, buf + USB_DT_ENDPOINT_SIZE,
+			USB_DT_ENDPOINT_SIZE);
+		if (data->hs_desc.bLength != USB_DT_ENDPOINT_SIZE
+				|| data->hs_desc.bDescriptorType
+					!= USB_DT_ENDPOINT) {
+			DBG(data->dev, "config %s, bad hs length or type\n",
+					data->name);
+			goto fail0;
+		}
+	}
+
+	spin_lock_irq (&data->dev->lock);
+	if (data->dev->state == STATE_DEV_UNBOUND) {
+		value = -ENOENT;
+		goto gone;
+	} else {
+		ep = data->ep;
+		if (ep == NULL) {
+			value = -ENODEV;
+			goto gone;
+		}
+	}
+	switch (data->dev->gadget->speed) {
+	case USB_SPEED_LOW:
+	case USB_SPEED_FULL:
+		ep->desc = &data->desc;
+		break;
+	case USB_SPEED_HIGH:
+		/* fails if caller didn't provide that descriptor... */
+		ep->desc = &data->hs_desc;
+		break;
+	default:
+		DBG(data->dev, "unconnected, %s init abandoned\n",
+				data->name);
+		value = -EINVAL;
+		goto gone;
+	}
+	value = usb_ep_enable(ep);
+	if (value == 0) {
+		data->state = STATE_EP_ENABLED;
+		value = length;
+	}
+gone:
+	spin_unlock_irq (&data->dev->lock);
+	if (value < 0) {
+fail:
+		data->desc.bDescriptorType = 0;
+		data->hs_desc.bDescriptorType = 0;
+	}
+	return value;
+fail0:
+	value = -EINVAL;
+	goto fail;
+}
+
+static int
+ep_open (struct inode *inode, struct file *fd)
+{
+	struct ep_data		*data = inode->i_private;
+	int			value = -EBUSY;
+
+	if (mutex_lock_interruptible(&data->lock) != 0)
+		return -EINTR;
+	spin_lock_irq (&data->dev->lock);
+	if (data->dev->state == STATE_DEV_UNBOUND)
+		value = -ENOENT;
+	else if (data->state == STATE_EP_DISABLED) {
+		value = 0;
+		data->state = STATE_EP_READY;
+		get_ep (data);
+		fd->private_data = data;
+		VDEBUG (data->dev, "%s ready\n", data->name);
+	} else
+		DBG (data->dev, "%s state %d\n",
+			data->name, data->state);
+	spin_unlock_irq (&data->dev->lock);
+	mutex_unlock(&data->lock);
+	return value;
+}
+
+/*----------------------------------------------------------------------*/
+
+/* EP0 IMPLEMENTATION can be partly in userspace.
+ *
+ * Drivers that use this facility receive various events, including
+ * control requests the kernel doesn't handle.  Drivers that don't
+ * use this facility may be too simple-minded for real applications.
+ */
+
+static inline void ep0_readable (struct dev_data *dev)
+{
+	wake_up (&dev->wait);
+	kill_fasync (&dev->fasync, SIGIO, POLL_IN);
+}
+
+static void clean_req (struct usb_ep *ep, struct usb_request *req)
+{
+	struct dev_data		*dev = ep->driver_data;
+
+	if (req->buf != dev->rbuf) {
+		kfree(req->buf);
+		req->buf = dev->rbuf;
+	}
+	req->complete = epio_complete;
+	dev->setup_out_ready = 0;
+}
+
+static void ep0_complete (struct usb_ep *ep, struct usb_request *req)
+{
+	struct dev_data		*dev = ep->driver_data;
+	unsigned long		flags;
+	int			free = 1;
+
+	/* for control OUT, data must still get to userspace */
+	spin_lock_irqsave(&dev->lock, flags);
+	if (!dev->setup_in) {
+		dev->setup_out_error = (req->status != 0);
+		if (!dev->setup_out_error)
+			free = 0;
+		dev->setup_out_ready = 1;
+		ep0_readable (dev);
+	}
+
+	/* clean up as appropriate */
+	if (free && req->buf != &dev->rbuf)
+		clean_req (ep, req);
+	req->complete = epio_complete;
+	spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+static int setup_req (struct usb_ep *ep, struct usb_request *req, u16 len)
+{
+	struct dev_data	*dev = ep->driver_data;
+
+	if (dev->setup_out_ready) {
+		DBG (dev, "ep0 request busy!\n");
+		return -EBUSY;
+	}
+	if (len > sizeof (dev->rbuf))
+		req->buf = kmalloc(len, GFP_ATOMIC);
+	if (req->buf == NULL) {
+		req->buf = dev->rbuf;
+		return -ENOMEM;
+	}
+	req->complete = ep0_complete;
+	req->length = len;
+	req->zero = 0;
+	return 0;
+}
+
+static ssize_t
+ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
+{
+	struct dev_data			*dev = fd->private_data;
+	ssize_t				retval;
+	enum ep0_state			state;
+
+	spin_lock_irq (&dev->lock);
+	if (dev->state <= STATE_DEV_OPENED) {
+		retval = -EINVAL;
+		goto done;
+	}
+
+	/* report fd mode change before acting on it */
+	if (dev->setup_abort) {
+		dev->setup_abort = 0;
+		retval = -EIDRM;
+		goto done;
+	}
+
+	/* control DATA stage */
+	if ((state = dev->state) == STATE_DEV_SETUP) {
+
+		if (dev->setup_in) {		/* stall IN */
+			VDEBUG(dev, "ep0in stall\n");
+			(void) usb_ep_set_halt (dev->gadget->ep0);
+			retval = -EL2HLT;
+			dev->state = STATE_DEV_CONNECTED;
+
+		} else if (len == 0) {		/* ack SET_CONFIGURATION etc */
+			struct usb_ep		*ep = dev->gadget->ep0;
+			struct usb_request	*req = dev->req;
+
+			if ((retval = setup_req (ep, req, 0)) == 0) {
+				++dev->udc_usage;
+				spin_unlock_irq (&dev->lock);
+				retval = usb_ep_queue (ep, req, GFP_KERNEL);
+				spin_lock_irq (&dev->lock);
+				--dev->udc_usage;
+			}
+			dev->state = STATE_DEV_CONNECTED;
+
+			/* assume that was SET_CONFIGURATION */
+			if (dev->current_config) {
+				unsigned power;
+
+				if (gadget_is_dualspeed(dev->gadget)
+						&& (dev->gadget->speed
+							== USB_SPEED_HIGH))
+					power = dev->hs_config->bMaxPower;
+				else
+					power = dev->config->bMaxPower;
+				usb_gadget_vbus_draw(dev->gadget, 2 * power);
+			}
+
+		} else {			/* collect OUT data */
+			if ((fd->f_flags & O_NONBLOCK) != 0
+					&& !dev->setup_out_ready) {
+				retval = -EAGAIN;
+				goto done;
+			}
+			spin_unlock_irq (&dev->lock);
+			retval = wait_event_interruptible (dev->wait,
+					dev->setup_out_ready != 0);
+
+			/* FIXME state could change from under us */
+			spin_lock_irq (&dev->lock);
+			if (retval)
+				goto done;
+
+			if (dev->state != STATE_DEV_SETUP) {
+				retval = -ECANCELED;
+				goto done;
+			}
+			dev->state = STATE_DEV_CONNECTED;
+
+			if (dev->setup_out_error)
+				retval = -EIO;
+			else {
+				len = min (len, (size_t)dev->req->actual);
+				++dev->udc_usage;
+				spin_unlock_irq(&dev->lock);
+				if (copy_to_user (buf, dev->req->buf, len))
+					retval = -EFAULT;
+				else
+					retval = len;
+				spin_lock_irq(&dev->lock);
+				--dev->udc_usage;
+				clean_req (dev->gadget->ep0, dev->req);
+				/* NOTE userspace can't yet choose to stall */
+			}
+		}
+		goto done;
+	}
+
+	/* else normal: return event data */
+	if (len < sizeof dev->event [0]) {
+		retval = -EINVAL;
+		goto done;
+	}
+	len -= len % sizeof (struct usb_gadgetfs_event);
+	dev->usermode_setup = 1;
+
+scan:
+	/* return queued events right away */
+	if (dev->ev_next != 0) {
+		unsigned		i, n;
+
+		n = len / sizeof (struct usb_gadgetfs_event);
+		if (dev->ev_next < n)
+			n = dev->ev_next;
+
+		/* ep0 i/o has special semantics during STATE_DEV_SETUP */
+		for (i = 0; i < n; i++) {
+			if (dev->event [i].type == GADGETFS_SETUP) {
+				dev->state = STATE_DEV_SETUP;
+				n = i + 1;
+				break;
+			}
+		}
+		spin_unlock_irq (&dev->lock);
+		len = n * sizeof (struct usb_gadgetfs_event);
+		if (copy_to_user (buf, &dev->event, len))
+			retval = -EFAULT;
+		else
+			retval = len;
+		if (len > 0) {
+			/* NOTE this doesn't guard against broken drivers;
+			 * concurrent ep0 readers may lose events.
+			 */
+			spin_lock_irq (&dev->lock);
+			if (dev->ev_next > n) {
+				memmove(&dev->event[0], &dev->event[n],
+					sizeof (struct usb_gadgetfs_event)
+						* (dev->ev_next - n));
+			}
+			dev->ev_next -= n;
+			spin_unlock_irq (&dev->lock);
+		}
+		return retval;
+	}
+	if (fd->f_flags & O_NONBLOCK) {
+		retval = -EAGAIN;
+		goto done;
+	}
+
+	switch (state) {
+	default:
+		DBG (dev, "fail %s, state %d\n", __func__, state);
+		retval = -ESRCH;
+		break;
+	case STATE_DEV_UNCONNECTED:
+	case STATE_DEV_CONNECTED:
+		spin_unlock_irq (&dev->lock);
+		DBG (dev, "%s wait\n", __func__);
+
+		/* wait for events */
+		retval = wait_event_interruptible (dev->wait,
+				dev->ev_next != 0);
+		if (retval < 0)
+			return retval;
+		spin_lock_irq (&dev->lock);
+		goto scan;
+	}
+
+done:
+	spin_unlock_irq (&dev->lock);
+	return retval;
+}
+
+static struct usb_gadgetfs_event *
+next_event (struct dev_data *dev, enum usb_gadgetfs_event_type type)
+{
+	struct usb_gadgetfs_event	*event;
+	unsigned			i;
+
+	switch (type) {
+	/* these events purge the queue */
+	case GADGETFS_DISCONNECT:
+		if (dev->state == STATE_DEV_SETUP)
+			dev->setup_abort = 1;
+		fallthrough;
+	case GADGETFS_CONNECT:
+		dev->ev_next = 0;
+		break;
+	case GADGETFS_SETUP:		/* previous request timed out */
+	case GADGETFS_SUSPEND:		/* same effect */
+		/* these events can't be repeated */
+		for (i = 0; i != dev->ev_next; i++) {
+			if (dev->event [i].type != type)
+				continue;
+			DBG(dev, "discard old event[%d] %d\n", i, type);
+			dev->ev_next--;
+			if (i == dev->ev_next)
+				break;
+			/* indices start at zero, for simplicity */
+			memmove (&dev->event [i], &dev->event [i + 1],
+				sizeof (struct usb_gadgetfs_event)
+					* (dev->ev_next - i));
+		}
+		break;
+	default:
+		BUG ();
+	}
+	VDEBUG(dev, "event[%d] = %d\n", dev->ev_next, type);
+	event = &dev->event [dev->ev_next++];
+	BUG_ON (dev->ev_next > N_EVENT);
+	memset (event, 0, sizeof *event);
+	event->type = type;
+	return event;
+}
+
+static ssize_t
+ep0_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
+{
+	struct dev_data		*dev = fd->private_data;
+	ssize_t			retval = -ESRCH;
+
+	/* report fd mode change before acting on it */
+	if (dev->setup_abort) {
+		dev->setup_abort = 0;
+		retval = -EIDRM;
+
+	/* data and/or status stage for control request */
+	} else if (dev->state == STATE_DEV_SETUP) {
+
+		len = min_t(size_t, len, dev->setup_wLength);
+		if (dev->setup_in) {
+			retval = setup_req (dev->gadget->ep0, dev->req, len);
+			if (retval == 0) {
+				dev->state = STATE_DEV_CONNECTED;
+				++dev->udc_usage;
+				spin_unlock_irq (&dev->lock);
+				if (copy_from_user (dev->req->buf, buf, len))
+					retval = -EFAULT;
+				else {
+					if (len < dev->setup_wLength)
+						dev->req->zero = 1;
+					retval = usb_ep_queue (
+						dev->gadget->ep0, dev->req,
+						GFP_KERNEL);
+				}
+				spin_lock_irq(&dev->lock);
+				--dev->udc_usage;
+				if (retval < 0) {
+					clean_req (dev->gadget->ep0, dev->req);
+				} else
+					retval = len;
+
+				return retval;
+			}
+
+		/* can stall some OUT transfers */
+		} else if (dev->setup_can_stall) {
+			VDEBUG(dev, "ep0out stall\n");
+			(void) usb_ep_set_halt (dev->gadget->ep0);
+			retval = -EL2HLT;
+			dev->state = STATE_DEV_CONNECTED;
+		} else {
+			DBG(dev, "bogus ep0out stall!\n");
+		}
+	} else
+		DBG (dev, "fail %s, state %d\n", __func__, dev->state);
+
+	return retval;
+}
+
+static int
+ep0_fasync (int f, struct file *fd, int on)
+{
+	struct dev_data		*dev = fd->private_data;
+	// caller must F_SETOWN before signal delivery happens
+	VDEBUG (dev, "%s %s\n", __func__, on ? "on" : "off");
+	return fasync_helper (f, fd, on, &dev->fasync);
+}
+
+static struct usb_gadget_driver gadgetfs_driver;
+
+static int
+dev_release (struct inode *inode, struct file *fd)
+{
+	struct dev_data		*dev = fd->private_data;
+
+	/* closing ep0 === shutdown all */
+
+	if (dev->gadget_registered) {
+		usb_gadget_unregister_driver (&gadgetfs_driver);
+		dev->gadget_registered = false;
+	}
+
+	/* at this point "good" hardware has disconnected the
+	 * device from USB; the host won't see it any more.
+	 * alternatively, all host requests will time out.
+	 */
+
+	kfree (dev->buf);
+	dev->buf = NULL;
+
+	/* other endpoints were all decoupled from this device */
+	spin_lock_irq(&dev->lock);
+	dev->state = STATE_DEV_DISABLED;
+	spin_unlock_irq(&dev->lock);
+
+	put_dev (dev);
+	return 0;
+}
+
+static __poll_t
+ep0_poll (struct file *fd, poll_table *wait)
+{
+	struct dev_data         *dev = fd->private_data;
+	__poll_t                mask = 0;
+
+	if (dev->state <= STATE_DEV_OPENED)
+		return DEFAULT_POLLMASK;
+
+	poll_wait(fd, &dev->wait, wait);
+
+	spin_lock_irq(&dev->lock);
+
+	/* report fd mode change before acting on it */
+	if (dev->setup_abort) {
+		dev->setup_abort = 0;
+		mask = EPOLLHUP;
+		goto out;
+	}
+
+	if (dev->state == STATE_DEV_SETUP) {
+		if (dev->setup_in || dev->setup_can_stall)
+			mask = EPOLLOUT;
+	} else {
+		if (dev->ev_next != 0)
+			mask = EPOLLIN;
+	}
+out:
+	spin_unlock_irq(&dev->lock);
+	return mask;
+}
+
+static long gadget_dev_ioctl (struct file *fd, unsigned code, unsigned long value)
+{
+	struct dev_data		*dev = fd->private_data;
+	struct usb_gadget	*gadget = dev->gadget;
+	long ret = -ENOTTY;
+
+	spin_lock_irq(&dev->lock);
+	if (dev->state == STATE_DEV_OPENED ||
+			dev->state == STATE_DEV_UNBOUND) {
+		/* Not bound to a UDC */
+	} else if (gadget->ops->ioctl) {
+		++dev->udc_usage;
+		spin_unlock_irq(&dev->lock);
+
+		ret = gadget->ops->ioctl (gadget, code, value);
+
+		spin_lock_irq(&dev->lock);
+		--dev->udc_usage;
+	}
+	spin_unlock_irq(&dev->lock);
+
+	return ret;
+}
+
+/*----------------------------------------------------------------------*/
+
+/* The in-kernel gadget driver handles most ep0 issues, in particular
+ * enumerating the single configuration (as provided from user space).
+ *
+ * Unrecognized ep0 requests may be handled in user space.
+ */
+
+static void make_qualifier (struct dev_data *dev)
+{
+	struct usb_qualifier_descriptor		qual;
+	struct usb_device_descriptor		*desc;
+
+	qual.bLength = sizeof qual;
+	qual.bDescriptorType = USB_DT_DEVICE_QUALIFIER;
+	qual.bcdUSB = cpu_to_le16 (0x0200);
+
+	desc = dev->dev;
+	qual.bDeviceClass = desc->bDeviceClass;
+	qual.bDeviceSubClass = desc->bDeviceSubClass;
+	qual.bDeviceProtocol = desc->bDeviceProtocol;
+
+	/* assumes ep0 uses the same value for both speeds ... */
+	qual.bMaxPacketSize0 = dev->gadget->ep0->maxpacket;
+
+	qual.bNumConfigurations = 1;
+	qual.bRESERVED = 0;
+
+	memcpy (dev->rbuf, &qual, sizeof qual);
+}
+
+static int
+config_buf (struct dev_data *dev, u8 type, unsigned index)
+{
+	int		len;
+	int		hs = 0;
+
+	/* only one configuration */
+	if (index > 0)
+		return -EINVAL;
+
+	if (gadget_is_dualspeed(dev->gadget)) {
+		hs = (dev->gadget->speed == USB_SPEED_HIGH);
+		if (type == USB_DT_OTHER_SPEED_CONFIG)
+			hs = !hs;
+	}
+	if (hs) {
+		dev->req->buf = dev->hs_config;
+		len = le16_to_cpu(dev->hs_config->wTotalLength);
+	} else {
+		dev->req->buf = dev->config;
+		len = le16_to_cpu(dev->config->wTotalLength);
+	}
+	((u8 *)dev->req->buf) [1] = type;
+	return len;
+}
+
+static int
+gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+{
+	struct dev_data			*dev = get_gadget_data (gadget);
+	struct usb_request		*req = dev->req;
+	int				value = -EOPNOTSUPP;
+	struct usb_gadgetfs_event	*event;
+	u16				w_value = le16_to_cpu(ctrl->wValue);
+	u16				w_length = le16_to_cpu(ctrl->wLength);
+
+	if (w_length > RBUF_SIZE) {
+		if (ctrl->bRequestType & USB_DIR_IN) {
+			/* Cast away the const, we are going to overwrite on purpose. */
+			__le16 *temp = (__le16 *)&ctrl->wLength;
+
+			*temp = cpu_to_le16(RBUF_SIZE);
+			w_length = RBUF_SIZE;
+		} else {
+			return value;
+		}
+	}
+
+	spin_lock (&dev->lock);
+	dev->setup_abort = 0;
+	if (dev->state == STATE_DEV_UNCONNECTED) {
+		if (gadget_is_dualspeed(gadget)
+				&& gadget->speed == USB_SPEED_HIGH
+				&& dev->hs_config == NULL) {
+			spin_unlock(&dev->lock);
+			ERROR (dev, "no high speed config??\n");
+			return -EINVAL;
+		}
+
+		dev->state = STATE_DEV_CONNECTED;
+
+		INFO (dev, "connected\n");
+		event = next_event (dev, GADGETFS_CONNECT);
+		event->u.speed = gadget->speed;
+		ep0_readable (dev);
+
+	/* host may have given up waiting for response.  we can miss control
+	 * requests handled lower down (device/endpoint status and features);
+	 * then ep0_{read,write} will report the wrong status. controller
+	 * driver will have aborted pending i/o.
+	 */
+	} else if (dev->state == STATE_DEV_SETUP)
+		dev->setup_abort = 1;
+
+	req->buf = dev->rbuf;
+	req->context = NULL;
+	switch (ctrl->bRequest) {
+
+	case USB_REQ_GET_DESCRIPTOR:
+		if (ctrl->bRequestType != USB_DIR_IN)
+			goto unrecognized;
+		switch (w_value >> 8) {
+
+		case USB_DT_DEVICE:
+			value = min (w_length, (u16) sizeof *dev->dev);
+			dev->dev->bMaxPacketSize0 = dev->gadget->ep0->maxpacket;
+			req->buf = dev->dev;
+			break;
+		case USB_DT_DEVICE_QUALIFIER:
+			if (!dev->hs_config)
+				break;
+			value = min (w_length, (u16)
+				sizeof (struct usb_qualifier_descriptor));
+			make_qualifier (dev);
+			break;
+		case USB_DT_OTHER_SPEED_CONFIG:
+		case USB_DT_CONFIG:
+			value = config_buf (dev,
+					w_value >> 8,
+					w_value & 0xff);
+			if (value >= 0)
+				value = min (w_length, (u16) value);
+			break;
+		case USB_DT_STRING:
+			goto unrecognized;
+
+		default:		// all others are errors
+			break;
+		}
+		break;
+
+	/* currently one config, two speeds */
+	case USB_REQ_SET_CONFIGURATION:
+		if (ctrl->bRequestType != 0)
+			goto unrecognized;
+		if (0 == (u8) w_value) {
+			value = 0;
+			dev->current_config = 0;
+			usb_gadget_vbus_draw(gadget, 8 /* mA */ );
+			// user mode expected to disable endpoints
+		} else {
+			u8	config, power;
+
+			if (gadget_is_dualspeed(gadget)
+					&& gadget->speed == USB_SPEED_HIGH) {
+				config = dev->hs_config->bConfigurationValue;
+				power = dev->hs_config->bMaxPower;
+			} else {
+				config = dev->config->bConfigurationValue;
+				power = dev->config->bMaxPower;
+			}
+
+			if (config == (u8) w_value) {
+				value = 0;
+				dev->current_config = config;
+				usb_gadget_vbus_draw(gadget, 2 * power);
+			}
+		}
+
+		/* report SET_CONFIGURATION like any other control request,
+		 * except that usermode may not stall this.  the next
+		 * request mustn't be allowed start until this finishes:
+		 * endpoints and threads set up, etc.
+		 *
+		 * NOTE:  older PXA hardware (before PXA 255: without UDCCFR)
+		 * has bad/racey automagic that prevents synchronizing here.
+		 * even kernel mode drivers often miss them.
+		 */
+		if (value == 0) {
+			INFO (dev, "configuration #%d\n", dev->current_config);
+			usb_gadget_set_state(gadget, USB_STATE_CONFIGURED);
+			if (dev->usermode_setup) {
+				dev->setup_can_stall = 0;
+				goto delegate;
+			}
+		}
+		break;
+
+#ifndef	CONFIG_USB_PXA25X
+	/* PXA automagically handles this request too */
+	case USB_REQ_GET_CONFIGURATION:
+		if (ctrl->bRequestType != 0x80)
+			goto unrecognized;
+		*(u8 *)req->buf = dev->current_config;
+		value = min (w_length, (u16) 1);
+		break;
+#endif
+
+	default:
+unrecognized:
+		VDEBUG (dev, "%s req%02x.%02x v%04x i%04x l%d\n",
+			dev->usermode_setup ? "delegate" : "fail",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, le16_to_cpu(ctrl->wIndex), w_length);
+
+		/* if there's an ep0 reader, don't stall */
+		if (dev->usermode_setup) {
+			dev->setup_can_stall = 1;
+delegate:
+			dev->setup_in = (ctrl->bRequestType & USB_DIR_IN)
+						? 1 : 0;
+			dev->setup_wLength = w_length;
+			dev->setup_out_ready = 0;
+			dev->setup_out_error = 0;
+
+			/* read DATA stage for OUT right away */
+			if (unlikely (!dev->setup_in && w_length)) {
+				value = setup_req (gadget->ep0, dev->req,
+							w_length);
+				if (value < 0)
+					break;
+
+				++dev->udc_usage;
+				spin_unlock (&dev->lock);
+				value = usb_ep_queue (gadget->ep0, dev->req,
+							GFP_KERNEL);
+				spin_lock (&dev->lock);
+				--dev->udc_usage;
+				if (value < 0) {
+					clean_req (gadget->ep0, dev->req);
+					break;
+				}
+
+				/* we can't currently stall these */
+				dev->setup_can_stall = 0;
+			}
+
+			/* state changes when reader collects event */
+			event = next_event (dev, GADGETFS_SETUP);
+			event->u.setup = *ctrl;
+			ep0_readable (dev);
+			spin_unlock (&dev->lock);
+			return 0;
+		}
+	}
+
+	/* proceed with data transfer and status phases? */
+	if (value >= 0 && dev->state != STATE_DEV_SETUP) {
+		req->length = value;
+		req->zero = value < w_length;
+
+		++dev->udc_usage;
+		spin_unlock (&dev->lock);
+		value = usb_ep_queue (gadget->ep0, req, GFP_KERNEL);
+		spin_lock(&dev->lock);
+		--dev->udc_usage;
+		spin_unlock(&dev->lock);
+		if (value < 0) {
+			DBG (dev, "ep_queue --> %d\n", value);
+			req->status = 0;
+		}
+		return value;
+	}
+
+	/* device stalls when value < 0 */
+	spin_unlock (&dev->lock);
+	return value;
+}
+
+static void destroy_ep_files (struct dev_data *dev)
+{
+	DBG (dev, "%s %d\n", __func__, dev->state);
+
+	/* dev->state must prevent interference */
+	spin_lock_irq (&dev->lock);
+	while (!list_empty(&dev->epfiles)) {
+		struct ep_data	*ep;
+		struct inode	*parent;
+		struct dentry	*dentry;
+
+		/* break link to FS */
+		ep = list_first_entry (&dev->epfiles, struct ep_data, epfiles);
+		list_del_init (&ep->epfiles);
+		spin_unlock_irq (&dev->lock);
+
+		dentry = ep->dentry;
+		ep->dentry = NULL;
+		parent = d_inode(dentry->d_parent);
+
+		/* break link to controller */
+		mutex_lock(&ep->lock);
+		if (ep->state == STATE_EP_ENABLED)
+			(void) usb_ep_disable (ep->ep);
+		ep->state = STATE_EP_UNBOUND;
+		usb_ep_free_request (ep->ep, ep->req);
+		ep->ep = NULL;
+		mutex_unlock(&ep->lock);
+
+		wake_up (&ep->wait);
+		put_ep (ep);
+
+		/* break link to dcache */
+		inode_lock(parent);
+		d_delete (dentry);
+		dput (dentry);
+		inode_unlock(parent);
+
+		spin_lock_irq (&dev->lock);
+	}
+	spin_unlock_irq (&dev->lock);
+}
+
+
+static struct dentry *
+gadgetfs_create_file (struct super_block *sb, char const *name,
+		void *data, const struct file_operations *fops);
+
+static int activate_ep_files (struct dev_data *dev)
+{
+	struct usb_ep	*ep;
+	struct ep_data	*data;
+
+	gadget_for_each_ep (ep, dev->gadget) {
+
+		data = kzalloc(sizeof(*data), GFP_KERNEL);
+		if (!data)
+			goto enomem0;
+		data->state = STATE_EP_DISABLED;
+		mutex_init(&data->lock);
+		init_waitqueue_head (&data->wait);
+
+		strncpy (data->name, ep->name, sizeof (data->name) - 1);
+		refcount_set (&data->count, 1);
+		data->dev = dev;
+		get_dev (dev);
+
+		data->ep = ep;
+		ep->driver_data = data;
+
+		data->req = usb_ep_alloc_request (ep, GFP_KERNEL);
+		if (!data->req)
+			goto enomem1;
+
+		data->dentry = gadgetfs_create_file (dev->sb, data->name,
+				data, &ep_io_operations);
+		if (!data->dentry)
+			goto enomem2;
+		list_add_tail (&data->epfiles, &dev->epfiles);
+	}
+	return 0;
+
+enomem2:
+	usb_ep_free_request (ep, data->req);
+enomem1:
+	put_dev (dev);
+	kfree (data);
+enomem0:
+	DBG (dev, "%s enomem\n", __func__);
+	destroy_ep_files (dev);
+	return -ENOMEM;
+}
+
+static void
+gadgetfs_unbind (struct usb_gadget *gadget)
+{
+	struct dev_data		*dev = get_gadget_data (gadget);
+
+	DBG (dev, "%s\n", __func__);
+
+	spin_lock_irq (&dev->lock);
+	dev->state = STATE_DEV_UNBOUND;
+	while (dev->udc_usage > 0) {
+		spin_unlock_irq(&dev->lock);
+		usleep_range(1000, 2000);
+		spin_lock_irq(&dev->lock);
+	}
+	spin_unlock_irq (&dev->lock);
+
+	destroy_ep_files (dev);
+	gadget->ep0->driver_data = NULL;
+	set_gadget_data (gadget, NULL);
+
+	/* we've already been disconnected ... no i/o is active */
+	if (dev->req)
+		usb_ep_free_request (gadget->ep0, dev->req);
+	DBG (dev, "%s done\n", __func__);
+	put_dev (dev);
+}
+
+static struct dev_data		*the_device;
+
+static int gadgetfs_bind(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct dev_data		*dev = the_device;
+
+	if (!dev)
+		return -ESRCH;
+	if (0 != strcmp (CHIP, gadget->name)) {
+		pr_err("%s expected %s controller not %s\n",
+			shortname, CHIP, gadget->name);
+		return -ENODEV;
+	}
+
+	set_gadget_data (gadget, dev);
+	dev->gadget = gadget;
+	gadget->ep0->driver_data = dev;
+
+	/* preallocate control response and buffer */
+	dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
+	if (!dev->req)
+		goto enomem;
+	dev->req->context = NULL;
+	dev->req->complete = epio_complete;
+
+	if (activate_ep_files (dev) < 0)
+		goto enomem;
+
+	INFO (dev, "bound to %s driver\n", gadget->name);
+	spin_lock_irq(&dev->lock);
+	dev->state = STATE_DEV_UNCONNECTED;
+	spin_unlock_irq(&dev->lock);
+	get_dev (dev);
+	return 0;
+
+enomem:
+	gadgetfs_unbind (gadget);
+	return -ENOMEM;
+}
+
+static void
+gadgetfs_disconnect (struct usb_gadget *gadget)
+{
+	struct dev_data		*dev = get_gadget_data (gadget);
+	unsigned long		flags;
+
+	spin_lock_irqsave (&dev->lock, flags);
+	if (dev->state == STATE_DEV_UNCONNECTED)
+		goto exit;
+	dev->state = STATE_DEV_UNCONNECTED;
+
+	INFO (dev, "disconnected\n");
+	next_event (dev, GADGETFS_DISCONNECT);
+	ep0_readable (dev);
+exit:
+	spin_unlock_irqrestore (&dev->lock, flags);
+}
+
+static void
+gadgetfs_suspend (struct usb_gadget *gadget)
+{
+	struct dev_data		*dev = get_gadget_data (gadget);
+	unsigned long		flags;
+
+	INFO (dev, "suspended from state %d\n", dev->state);
+	spin_lock_irqsave(&dev->lock, flags);
+	switch (dev->state) {
+	case STATE_DEV_SETUP:		// VERY odd... host died??
+	case STATE_DEV_CONNECTED:
+	case STATE_DEV_UNCONNECTED:
+		next_event (dev, GADGETFS_SUSPEND);
+		ep0_readable (dev);
+		fallthrough;
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+static struct usb_gadget_driver gadgetfs_driver = {
+	.function	= (char *) driver_desc,
+	.bind		= gadgetfs_bind,
+	.unbind		= gadgetfs_unbind,
+	.setup		= gadgetfs_setup,
+	.reset		= gadgetfs_disconnect,
+	.disconnect	= gadgetfs_disconnect,
+	.suspend	= gadgetfs_suspend,
+
+	.driver	= {
+		.name		= shortname,
+	},
+};
+
+/*----------------------------------------------------------------------*/
+/* DEVICE INITIALIZATION
+ *
+ *     fd = open ("/dev/gadget/$CHIP", O_RDWR)
+ *     status = write (fd, descriptors, sizeof descriptors)
+ *
+ * That write establishes the device configuration, so the kernel can
+ * bind to the controller ... guaranteeing it can handle enumeration
+ * at all necessary speeds.  Descriptor order is:
+ *
+ * . message tag (u32, host order) ... for now, must be zero; it
+ *	would change to support features like multi-config devices
+ * . full/low speed config ... all wTotalLength bytes (with interface,
+ *	class, altsetting, endpoint, and other descriptors)
+ * . high speed config ... all descriptors, for high speed operation;
+ *	this one's optional except for high-speed hardware
+ * . device descriptor
+ *
+ * Endpoints are not yet enabled. Drivers must wait until device
+ * configuration and interface altsetting changes create
+ * the need to configure (or unconfigure) them.
+ *
+ * After initialization, the device stays active for as long as that
+ * $CHIP file is open.  Events must then be read from that descriptor,
+ * such as configuration notifications.
+ */
+
+static int is_valid_config(struct usb_config_descriptor *config,
+		unsigned int total)
+{
+	return config->bDescriptorType == USB_DT_CONFIG
+		&& config->bLength == USB_DT_CONFIG_SIZE
+		&& total >= USB_DT_CONFIG_SIZE
+		&& config->bConfigurationValue != 0
+		&& (config->bmAttributes & USB_CONFIG_ATT_ONE) != 0
+		&& (config->bmAttributes & USB_CONFIG_ATT_WAKEUP) == 0;
+	/* FIXME if gadget->is_otg, _must_ include an otg descriptor */
+	/* FIXME check lengths: walk to end */
+}
+
+static ssize_t
+dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
+{
+	struct dev_data		*dev = fd->private_data;
+	ssize_t			value, length = len;
+	unsigned		total;
+	u32			tag;
+	char			*kbuf;
+
+	spin_lock_irq(&dev->lock);
+	if (dev->state > STATE_DEV_OPENED) {
+		value = ep0_write(fd, buf, len, ptr);
+		spin_unlock_irq(&dev->lock);
+		return value;
+	}
+	spin_unlock_irq(&dev->lock);
+
+	if ((len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) ||
+	    (len > PAGE_SIZE * 4))
+		return -EINVAL;
+
+	/* we might need to change message format someday */
+	if (copy_from_user (&tag, buf, 4))
+		return -EFAULT;
+	if (tag != 0)
+		return -EINVAL;
+	buf += 4;
+	length -= 4;
+
+	kbuf = memdup_user(buf, length);
+	if (IS_ERR(kbuf))
+		return PTR_ERR(kbuf);
+
+	spin_lock_irq (&dev->lock);
+	value = -EINVAL;
+	if (dev->buf) {
+		spin_unlock_irq(&dev->lock);
+		kfree(kbuf);
+		return value;
+	}
+	dev->buf = kbuf;
+
+	/* full or low speed config */
+	dev->config = (void *) kbuf;
+	total = le16_to_cpu(dev->config->wTotalLength);
+	if (!is_valid_config(dev->config, total) ||
+			total > length - USB_DT_DEVICE_SIZE)
+		goto fail;
+	kbuf += total;
+	length -= total;
+
+	/* optional high speed config */
+	if (kbuf [1] == USB_DT_CONFIG) {
+		dev->hs_config = (void *) kbuf;
+		total = le16_to_cpu(dev->hs_config->wTotalLength);
+		if (!is_valid_config(dev->hs_config, total) ||
+				total > length - USB_DT_DEVICE_SIZE)
+			goto fail;
+		kbuf += total;
+		length -= total;
+	} else {
+		dev->hs_config = NULL;
+	}
+
+	/* could support multiple configs, using another encoding! */
+
+	/* device descriptor (tweaked for paranoia) */
+	if (length != USB_DT_DEVICE_SIZE)
+		goto fail;
+	dev->dev = (void *)kbuf;
+	if (dev->dev->bLength != USB_DT_DEVICE_SIZE
+			|| dev->dev->bDescriptorType != USB_DT_DEVICE
+			|| dev->dev->bNumConfigurations != 1)
+		goto fail;
+	dev->dev->bcdUSB = cpu_to_le16 (0x0200);
+
+	/* triggers gadgetfs_bind(); then we can enumerate. */
+	spin_unlock_irq (&dev->lock);
+	if (dev->hs_config)
+		gadgetfs_driver.max_speed = USB_SPEED_HIGH;
+	else
+		gadgetfs_driver.max_speed = USB_SPEED_FULL;
+
+	value = usb_gadget_register_driver(&gadgetfs_driver);
+	if (value != 0) {
+		spin_lock_irq(&dev->lock);
+		goto fail;
+	} else {
+		/* at this point "good" hardware has for the first time
+		 * let the USB the host see us.  alternatively, if users
+		 * unplug/replug that will clear all the error state.
+		 *
+		 * note:  everything running before here was guaranteed
+		 * to choke driver model style diagnostics.  from here
+		 * on, they can work ... except in cleanup paths that
+		 * kick in after the ep0 descriptor is closed.
+		 */
+		value = len;
+		dev->gadget_registered = true;
+	}
+	return value;
+
+fail:
+	dev->config = NULL;
+	dev->hs_config = NULL;
+	dev->dev = NULL;
+	spin_unlock_irq (&dev->lock);
+	pr_debug ("%s: %s fail %zd, %p\n", shortname, __func__, value, dev);
+	kfree (dev->buf);
+	dev->buf = NULL;
+	return value;
+}
+
+static int
+gadget_dev_open (struct inode *inode, struct file *fd)
+{
+	struct dev_data		*dev = inode->i_private;
+	int			value = -EBUSY;
+
+	spin_lock_irq(&dev->lock);
+	if (dev->state == STATE_DEV_DISABLED) {
+		dev->ev_next = 0;
+		dev->state = STATE_DEV_OPENED;
+		fd->private_data = dev;
+		get_dev (dev);
+		value = 0;
+	}
+	spin_unlock_irq(&dev->lock);
+	return value;
+}
+
+static const struct file_operations ep0_operations = {
+	.llseek =	no_llseek,
+
+	.open =		gadget_dev_open,
+	.read =		ep0_read,
+	.write =	dev_config,
+	.fasync =	ep0_fasync,
+	.poll =		ep0_poll,
+	.unlocked_ioctl = gadget_dev_ioctl,
+	.release =	dev_release,
+};
+
+/*----------------------------------------------------------------------*/
+
+/* FILESYSTEM AND SUPERBLOCK OPERATIONS
+ *
+ * Mounting the filesystem creates a controller file, used first for
+ * device configuration then later for event monitoring.
+ */
+
+
+/* FIXME PAM etc could set this security policy without mount options
+ * if epfiles inherited ownership and permissons from ep0 ...
+ */
+
+static unsigned default_uid;
+static unsigned default_gid;
+static unsigned default_perm = S_IRUSR | S_IWUSR;
+
+module_param (default_uid, uint, 0644);
+module_param (default_gid, uint, 0644);
+module_param (default_perm, uint, 0644);
+
+
+static struct inode *
+gadgetfs_make_inode (struct super_block *sb,
+		void *data, const struct file_operations *fops,
+		int mode)
+{
+	struct inode *inode = new_inode (sb);
+
+	if (inode) {
+		inode->i_ino = get_next_ino();
+		inode->i_mode = mode;
+		inode->i_uid = make_kuid(&init_user_ns, default_uid);
+		inode->i_gid = make_kgid(&init_user_ns, default_gid);
+		inode->i_atime = inode->i_mtime = inode->i_ctime
+				= current_time(inode);
+		inode->i_private = data;
+		inode->i_fop = fops;
+	}
+	return inode;
+}
+
+/* creates in fs root directory, so non-renamable and non-linkable.
+ * so inode and dentry are paired, until device reconfig.
+ */
+static struct dentry *
+gadgetfs_create_file (struct super_block *sb, char const *name,
+		void *data, const struct file_operations *fops)
+{
+	struct dentry	*dentry;
+	struct inode	*inode;
+
+	dentry = d_alloc_name(sb->s_root, name);
+	if (!dentry)
+		return NULL;
+
+	inode = gadgetfs_make_inode (sb, data, fops,
+			S_IFREG | (default_perm & S_IRWXUGO));
+	if (!inode) {
+		dput(dentry);
+		return NULL;
+	}
+	d_add (dentry, inode);
+	return dentry;
+}
+
+static const struct super_operations gadget_fs_operations = {
+	.statfs =	simple_statfs,
+	.drop_inode =	generic_delete_inode,
+};
+
+static int
+gadgetfs_fill_super (struct super_block *sb, struct fs_context *fc)
+{
+	struct inode	*inode;
+	struct dev_data	*dev;
+	int		rc;
+
+	mutex_lock(&sb_mutex);
+
+	if (the_device) {
+		rc = -ESRCH;
+		goto Done;
+	}
+
+	CHIP = usb_get_gadget_udc_name();
+	if (!CHIP) {
+		rc = -ENODEV;
+		goto Done;
+	}
+
+	/* superblock */
+	sb->s_blocksize = PAGE_SIZE;
+	sb->s_blocksize_bits = PAGE_SHIFT;
+	sb->s_magic = GADGETFS_MAGIC;
+	sb->s_op = &gadget_fs_operations;
+	sb->s_time_gran = 1;
+
+	/* root inode */
+	inode = gadgetfs_make_inode (sb,
+			NULL, &simple_dir_operations,
+			S_IFDIR | S_IRUGO | S_IXUGO);
+	if (!inode)
+		goto Enomem;
+	inode->i_op = &simple_dir_inode_operations;
+	if (!(sb->s_root = d_make_root (inode)))
+		goto Enomem;
+
+	/* the ep0 file is named after the controller we expect;
+	 * user mode code can use it for sanity checks, like we do.
+	 */
+	dev = dev_new ();
+	if (!dev)
+		goto Enomem;
+
+	dev->sb = sb;
+	dev->dentry = gadgetfs_create_file(sb, CHIP, dev, &ep0_operations);
+	if (!dev->dentry) {
+		put_dev(dev);
+		goto Enomem;
+	}
+
+	/* other endpoint files are available after hardware setup,
+	 * from binding to a controller.
+	 */
+	the_device = dev;
+	rc = 0;
+	goto Done;
+
+ Enomem:
+	kfree(CHIP);
+	CHIP = NULL;
+	rc = -ENOMEM;
+
+ Done:
+	mutex_unlock(&sb_mutex);
+	return rc;
+}
+
+/* "mount -t gadgetfs path /dev/gadget" ends up here */
+static int gadgetfs_get_tree(struct fs_context *fc)
+{
+	return get_tree_single(fc, gadgetfs_fill_super);
+}
+
+static const struct fs_context_operations gadgetfs_context_ops = {
+	.get_tree	= gadgetfs_get_tree,
+};
+
+static int gadgetfs_init_fs_context(struct fs_context *fc)
+{
+	fc->ops = &gadgetfs_context_ops;
+	return 0;
+}
+
+static void
+gadgetfs_kill_sb (struct super_block *sb)
+{
+	mutex_lock(&sb_mutex);
+	kill_litter_super (sb);
+	if (the_device) {
+		put_dev (the_device);
+		the_device = NULL;
+	}
+	kfree(CHIP);
+	CHIP = NULL;
+	mutex_unlock(&sb_mutex);
+}
+
+/*----------------------------------------------------------------------*/
+
+static struct file_system_type gadgetfs_type = {
+	.owner		= THIS_MODULE,
+	.name		= shortname,
+	.init_fs_context = gadgetfs_init_fs_context,
+	.kill_sb	= gadgetfs_kill_sb,
+};
+MODULE_ALIAS_FS("gadgetfs");
+
+/*----------------------------------------------------------------------*/
+
+static int __init gadgetfs_init (void)
+{
+	int status;
+
+	status = register_filesystem (&gadgetfs_type);
+	if (status == 0)
+		pr_info ("%s: %s, version " DRIVER_VERSION "\n",
+			shortname, driver_desc);
+	return status;
+}
+module_init (gadgetfs_init);
+
+static void __exit gadgetfs_cleanup (void)
+{
+	pr_debug ("unregister %s\n", shortname);
+	unregister_filesystem (&gadgetfs_type);
+}
+module_exit (gadgetfs_cleanup);
+
diff --git a/drivers/usb/gadget/legacy/mass_storage.c b/drivers/usb/gadget/legacy/mass_storage.c
new file mode 100644
index 000000000..ac1741126
--- /dev/null
+++ b/drivers/usb/gadget/legacy/mass_storage.c
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * mass_storage.c -- Mass Storage USB Gadget
+ *
+ * Copyright (C) 2003-2008 Alan Stern
+ * Copyright (C) 2009 Samsung Electronics
+ *                    Author: Michal Nazarewicz <mina86@mina86.com>
+ * All rights reserved.
+ */
+
+
+/*
+ * The Mass Storage Gadget acts as a USB Mass Storage device,
+ * appearing to the host as a disk drive or as a CD-ROM drive.  In
+ * addition to providing an example of a genuinely useful gadget
+ * driver for a USB device, it also illustrates a technique of
+ * double-buffering for increased throughput.  Last but not least, it
+ * gives an easy way to probe the behavior of the Mass Storage drivers
+ * in a USB host.
+ *
+ * Since this file serves only administrative purposes and all the
+ * business logic is implemented in f_mass_storage.* file.  Read
+ * comments in this file for more detailed description.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/usb/ch9.h>
+#include <linux/module.h>
+
+/*-------------------------------------------------------------------------*/
+
+#define DRIVER_DESC		"Mass Storage Gadget"
+#define DRIVER_VERSION		"2009/09/11"
+
+/*
+ * Thanks to NetChip Technologies for donating this product ID.
+ *
+ * DO NOT REUSE THESE IDs with any other driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
+#define FSG_VENDOR_ID	0x0525	/* NetChip */
+#define FSG_PRODUCT_ID	0xa4a5	/* Linux-USB File-backed Storage Gadget */
+
+#include "f_mass_storage.h"
+
+/*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
+
+static struct usb_device_descriptor msg_device_desc = {
+	.bLength =		sizeof msg_device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	/* .bcdUSB = DYNAMIC */
+	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
+
+	/* Vendor and product id can be overridden by module parameters.  */
+	.idVendor =		cpu_to_le16(FSG_VENDOR_ID),
+	.idProduct =		cpu_to_le16(FSG_PRODUCT_ID),
+	.bNumConfigurations =	1,
+};
+
+static const struct usb_descriptor_header *otg_desc[2];
+
+static struct usb_string strings_dev[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language       = 0x0409,       /* en-us */
+	.strings        = strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+static struct usb_function_instance *fi_msg;
+static struct usb_function *f_msg;
+
+/****************************** Configurations ******************************/
+
+static struct fsg_module_parameters mod_data = {
+	.stall = 1
+};
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
+
+#else
+
+/*
+ * Number of buffers we will use.
+ * 2 is usually enough for good buffering pipeline
+ */
+#define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
+
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
+
+FSG_MODULE_PARAMETERS(/* no prefix */, mod_data);
+
+static int msg_do_config(struct usb_configuration *c)
+{
+	int ret;
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	f_msg = usb_get_function(fi_msg);
+	if (IS_ERR(f_msg))
+		return PTR_ERR(f_msg);
+
+	ret = usb_add_function(c, f_msg);
+	if (ret)
+		goto put_func;
+
+	return 0;
+
+put_func:
+	usb_put_function(f_msg);
+	return ret;
+}
+
+static struct usb_configuration msg_config_driver = {
+	.label			= "Linux File-Backed Storage",
+	.bConfigurationValue	= 1,
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+
+
+/****************************** Gadget Bind ******************************/
+
+static int msg_bind(struct usb_composite_dev *cdev)
+{
+	struct fsg_opts *opts;
+	struct fsg_config config;
+	int status;
+
+	fi_msg = usb_get_function_instance("mass_storage");
+	if (IS_ERR(fi_msg))
+		return PTR_ERR(fi_msg);
+
+	fsg_config_from_params(&config, &mod_data, fsg_num_buffers);
+	opts = fsg_opts_from_func_inst(fi_msg);
+
+	opts->no_configfs = true;
+	status = fsg_common_set_num_buffers(opts->common, fsg_num_buffers);
+	if (status)
+		goto fail;
+
+	status = fsg_common_set_cdev(opts->common, cdev, config.can_stall);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_sysfs(opts->common, true);
+	status = fsg_common_create_luns(opts->common, &config);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_inquiry_string(opts->common, config.vendor_name,
+				      config.product_name);
+
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (status < 0)
+		goto fail_string_ids;
+	msg_device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+
+	if (gadget_is_otg(cdev->gadget) && !otg_desc[0]) {
+		struct usb_descriptor_header *usb_desc;
+
+		usb_desc = usb_otg_descriptor_alloc(cdev->gadget);
+		if (!usb_desc) {
+			status = -ENOMEM;
+			goto fail_string_ids;
+		}
+		usb_otg_descriptor_init(cdev->gadget, usb_desc);
+		otg_desc[0] = usb_desc;
+		otg_desc[1] = NULL;
+	}
+
+	status = usb_add_config(cdev, &msg_config_driver, msg_do_config);
+	if (status < 0)
+		goto fail_otg_desc;
+
+	usb_composite_overwrite_options(cdev, &coverwrite);
+	dev_info(&cdev->gadget->dev,
+		 DRIVER_DESC ", version: " DRIVER_VERSION "\n");
+	return 0;
+
+fail_otg_desc:
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+fail_string_ids:
+	fsg_common_remove_luns(opts->common);
+fail_set_cdev:
+	fsg_common_free_buffers(opts->common);
+fail:
+	usb_put_function_instance(fi_msg);
+	return status;
+}
+
+static int msg_unbind(struct usb_composite_dev *cdev)
+{
+	if (!IS_ERR(f_msg))
+		usb_put_function(f_msg);
+
+	if (!IS_ERR(fi_msg))
+		usb_put_function_instance(fi_msg);
+
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+
+	return 0;
+}
+
+/****************************** Some noise ******************************/
+
+static struct usb_composite_driver msg_driver = {
+	.name		= "g_mass_storage",
+	.dev		= &msg_device_desc,
+	.max_speed	= USB_SPEED_SUPER_PLUS,
+	.needs_serial	= 1,
+	.strings	= dev_strings,
+	.bind		= msg_bind,
+	.unbind		= msg_unbind,
+};
+
+module_usb_composite_driver(msg_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Michal Nazarewicz");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/legacy/multi.c b/drivers/usb/gadget/legacy/multi.c
new file mode 100644
index 000000000..8db5c91ae
--- /dev/null
+++ b/drivers/usb/gadget/legacy/multi.c
@@ -0,0 +1,493 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * multi.c -- Multifunction Composite driver
+ *
+ * Copyright (C) 2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2009 Samsung Electronics
+ * Author: Michal Nazarewicz (mina86@mina86.com)
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+
+#include "u_serial.h"
+#if defined USB_ETH_RNDIS
+#  undef USB_ETH_RNDIS
+#endif
+#ifdef CONFIG_USB_G_MULTI_RNDIS
+#  define USB_ETH_RNDIS y
+#endif
+
+
+#define DRIVER_DESC		"Multifunction Composite Gadget"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Michal Nazarewicz");
+MODULE_LICENSE("GPL");
+
+
+#include "f_mass_storage.h"
+
+#include "u_ecm.h"
+#ifdef USB_ETH_RNDIS
+#  include "u_rndis.h"
+#  include "rndis.h"
+#endif
+#include "u_ether.h"
+
+USB_GADGET_COMPOSITE_OPTIONS();
+
+USB_ETHERNET_MODULE_PARAMETERS();
+
+/***************************** Device Descriptor ****************************/
+
+#define MULTI_VENDOR_NUM	0x1d6b	/* Linux Foundation */
+#define MULTI_PRODUCT_NUM	0x0104	/* Multifunction Composite Gadget */
+
+
+enum {
+	__MULTI_NO_CONFIG,
+#ifdef CONFIG_USB_G_MULTI_RNDIS
+	MULTI_RNDIS_CONFIG_NUM,
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+	MULTI_CDC_CONFIG_NUM,
+#endif
+};
+
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	/* .bcdUSB = DYNAMIC */
+
+	.bDeviceClass =		USB_CLASS_MISC /* 0xEF */,
+	.bDeviceSubClass =	2,
+	.bDeviceProtocol =	1,
+
+	/* Vendor and product id can be overridden by module parameters.  */
+	.idVendor =		cpu_to_le16(MULTI_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(MULTI_PRODUCT_NUM),
+};
+
+static const struct usb_descriptor_header *otg_desc[2];
+
+enum {
+	MULTI_STRING_RNDIS_CONFIG_IDX = USB_GADGET_FIRST_AVAIL_IDX,
+	MULTI_STRING_CDC_CONFIG_IDX,
+};
+
+static struct usb_string strings_dev[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
+	[MULTI_STRING_RNDIS_CONFIG_IDX].s = "Multifunction with RNDIS",
+	[MULTI_STRING_CDC_CONFIG_IDX].s   = "Multifunction with CDC ECM",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&(struct usb_gadget_strings){
+		.language	= 0x0409,	/* en-us */
+		.strings	= strings_dev,
+	},
+	NULL,
+};
+
+
+
+
+/****************************** Configurations ******************************/
+
+static struct fsg_module_parameters fsg_mod_data = { .stall = 1 };
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
+
+#else
+
+/*
+ * Number of buffers we will use.
+ * 2 is usually enough for good buffering pipeline
+ */
+#define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
+
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
+
+FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
+
+static struct usb_function_instance *fi_acm;
+static struct usb_function_instance *fi_msg;
+
+/********** RNDIS **********/
+
+#ifdef USB_ETH_RNDIS
+static struct usb_function_instance *fi_rndis;
+static struct usb_function *f_acm_rndis;
+static struct usb_function *f_rndis;
+static struct usb_function *f_msg_rndis;
+
+static int rndis_do_config(struct usb_configuration *c)
+{
+	int ret;
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	f_rndis = usb_get_function(fi_rndis);
+	if (IS_ERR(f_rndis))
+		return PTR_ERR(f_rndis);
+
+	ret = usb_add_function(c, f_rndis);
+	if (ret < 0)
+		goto err_func_rndis;
+
+	f_acm_rndis = usb_get_function(fi_acm);
+	if (IS_ERR(f_acm_rndis)) {
+		ret = PTR_ERR(f_acm_rndis);
+		goto err_func_acm;
+	}
+
+	ret = usb_add_function(c, f_acm_rndis);
+	if (ret)
+		goto err_conf;
+
+	f_msg_rndis = usb_get_function(fi_msg);
+	if (IS_ERR(f_msg_rndis)) {
+		ret = PTR_ERR(f_msg_rndis);
+		goto err_fsg;
+	}
+
+	ret = usb_add_function(c, f_msg_rndis);
+	if (ret)
+		goto err_run;
+
+	return 0;
+err_run:
+	usb_put_function(f_msg_rndis);
+err_fsg:
+	usb_remove_function(c, f_acm_rndis);
+err_conf:
+	usb_put_function(f_acm_rndis);
+err_func_acm:
+	usb_remove_function(c, f_rndis);
+err_func_rndis:
+	usb_put_function(f_rndis);
+	return ret;
+}
+
+static int rndis_config_register(struct usb_composite_dev *cdev)
+{
+	static struct usb_configuration config = {
+		.bConfigurationValue	= MULTI_RNDIS_CONFIG_NUM,
+		.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+	};
+
+	config.label          = strings_dev[MULTI_STRING_RNDIS_CONFIG_IDX].s;
+	config.iConfiguration = strings_dev[MULTI_STRING_RNDIS_CONFIG_IDX].id;
+
+	return usb_add_config(cdev, &config, rndis_do_config);
+}
+
+#else
+
+static int rndis_config_register(struct usb_composite_dev *cdev)
+{
+	return 0;
+}
+
+#endif
+
+
+/********** CDC ECM **********/
+
+#ifdef CONFIG_USB_G_MULTI_CDC
+static struct usb_function_instance *fi_ecm;
+static struct usb_function *f_acm_multi;
+static struct usb_function *f_ecm;
+static struct usb_function *f_msg_multi;
+
+static int cdc_do_config(struct usb_configuration *c)
+{
+	int ret;
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	f_ecm = usb_get_function(fi_ecm);
+	if (IS_ERR(f_ecm))
+		return PTR_ERR(f_ecm);
+
+	ret = usb_add_function(c, f_ecm);
+	if (ret < 0)
+		goto err_func_ecm;
+
+	/* implicit port_num is zero */
+	f_acm_multi = usb_get_function(fi_acm);
+	if (IS_ERR(f_acm_multi)) {
+		ret = PTR_ERR(f_acm_multi);
+		goto err_func_acm;
+	}
+
+	ret = usb_add_function(c, f_acm_multi);
+	if (ret)
+		goto err_conf;
+
+	f_msg_multi = usb_get_function(fi_msg);
+	if (IS_ERR(f_msg_multi)) {
+		ret = PTR_ERR(f_msg_multi);
+		goto err_fsg;
+	}
+
+	ret = usb_add_function(c, f_msg_multi);
+	if (ret)
+		goto err_run;
+
+	return 0;
+err_run:
+	usb_put_function(f_msg_multi);
+err_fsg:
+	usb_remove_function(c, f_acm_multi);
+err_conf:
+	usb_put_function(f_acm_multi);
+err_func_acm:
+	usb_remove_function(c, f_ecm);
+err_func_ecm:
+	usb_put_function(f_ecm);
+	return ret;
+}
+
+static int cdc_config_register(struct usb_composite_dev *cdev)
+{
+	static struct usb_configuration config = {
+		.bConfigurationValue	= MULTI_CDC_CONFIG_NUM,
+		.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+	};
+
+	config.label          = strings_dev[MULTI_STRING_CDC_CONFIG_IDX].s;
+	config.iConfiguration = strings_dev[MULTI_STRING_CDC_CONFIG_IDX].id;
+
+	return usb_add_config(cdev, &config, cdc_do_config);
+}
+
+#else
+
+static int cdc_config_register(struct usb_composite_dev *cdev)
+{
+	return 0;
+}
+
+#endif
+
+
+
+/****************************** Gadget Bind ******************************/
+
+static int multi_bind(struct usb_composite_dev *cdev)
+{
+	struct usb_gadget *gadget = cdev->gadget;
+#ifdef CONFIG_USB_G_MULTI_CDC
+	struct f_ecm_opts *ecm_opts;
+#endif
+#ifdef USB_ETH_RNDIS
+	struct f_rndis_opts *rndis_opts;
+#endif
+	struct fsg_opts *fsg_opts;
+	struct fsg_config config;
+	int status;
+
+	if (!can_support_ecm(cdev->gadget)) {
+		dev_err(&gadget->dev, "controller '%s' not usable\n",
+			gadget->name);
+		return -EINVAL;
+	}
+
+#ifdef CONFIG_USB_G_MULTI_CDC
+	fi_ecm = usb_get_function_instance("ecm");
+	if (IS_ERR(fi_ecm))
+		return PTR_ERR(fi_ecm);
+
+	ecm_opts = container_of(fi_ecm, struct f_ecm_opts, func_inst);
+
+	gether_set_qmult(ecm_opts->net, qmult);
+	if (!gether_set_host_addr(ecm_opts->net, host_addr))
+		pr_info("using host ethernet address: %s", host_addr);
+	if (!gether_set_dev_addr(ecm_opts->net, dev_addr))
+		pr_info("using self ethernet address: %s", dev_addr);
+#endif
+
+#ifdef USB_ETH_RNDIS
+	fi_rndis = usb_get_function_instance("rndis");
+	if (IS_ERR(fi_rndis)) {
+		status = PTR_ERR(fi_rndis);
+		goto fail;
+	}
+
+	rndis_opts = container_of(fi_rndis, struct f_rndis_opts, func_inst);
+
+	gether_set_qmult(rndis_opts->net, qmult);
+	if (!gether_set_host_addr(rndis_opts->net, host_addr))
+		pr_info("using host ethernet address: %s", host_addr);
+	if (!gether_set_dev_addr(rndis_opts->net, dev_addr))
+		pr_info("using self ethernet address: %s", dev_addr);
+#endif
+
+#if (defined CONFIG_USB_G_MULTI_CDC && defined USB_ETH_RNDIS)
+	/*
+	 * If both ecm and rndis are selected then:
+	 *	1) rndis borrows the net interface from ecm
+	 *	2) since the interface is shared it must not be bound
+	 *	twice - in ecm's _and_ rndis' binds, so do it here.
+	 */
+	gether_set_gadget(ecm_opts->net, cdev->gadget);
+	status = gether_register_netdev(ecm_opts->net);
+	if (status)
+		goto fail0;
+
+	rndis_borrow_net(fi_rndis, ecm_opts->net);
+	ecm_opts->bound = true;
+#endif
+
+	/* set up serial link layer */
+	fi_acm = usb_get_function_instance("acm");
+	if (IS_ERR(fi_acm)) {
+		status = PTR_ERR(fi_acm);
+		goto fail0;
+	}
+
+	/* set up mass storage function */
+	fi_msg = usb_get_function_instance("mass_storage");
+	if (IS_ERR(fi_msg)) {
+		status = PTR_ERR(fi_msg);
+		goto fail1;
+	}
+	fsg_config_from_params(&config, &fsg_mod_data, fsg_num_buffers);
+	fsg_opts = fsg_opts_from_func_inst(fi_msg);
+
+	fsg_opts->no_configfs = true;
+	status = fsg_common_set_num_buffers(fsg_opts->common, fsg_num_buffers);
+	if (status)
+		goto fail2;
+
+	status = fsg_common_set_cdev(fsg_opts->common, cdev, config.can_stall);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_sysfs(fsg_opts->common, true);
+	status = fsg_common_create_luns(fsg_opts->common, &config);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_inquiry_string(fsg_opts->common, config.vendor_name,
+				      config.product_name);
+
+	/* allocate string IDs */
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (unlikely(status < 0))
+		goto fail_string_ids;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+
+	if (gadget_is_otg(gadget) && !otg_desc[0]) {
+		struct usb_descriptor_header *usb_desc;
+
+		usb_desc = usb_otg_descriptor_alloc(gadget);
+		if (!usb_desc) {
+			status = -ENOMEM;
+			goto fail_string_ids;
+		}
+		usb_otg_descriptor_init(gadget, usb_desc);
+		otg_desc[0] = usb_desc;
+		otg_desc[1] = NULL;
+	}
+
+	/* register configurations */
+	status = rndis_config_register(cdev);
+	if (unlikely(status < 0))
+		goto fail_otg_desc;
+
+	status = cdc_config_register(cdev);
+	if (unlikely(status < 0))
+		goto fail_otg_desc;
+	usb_composite_overwrite_options(cdev, &coverwrite);
+
+	/* we're done */
+	dev_info(&gadget->dev, DRIVER_DESC "\n");
+	return 0;
+
+
+	/* error recovery */
+fail_otg_desc:
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+fail_string_ids:
+	fsg_common_remove_luns(fsg_opts->common);
+fail_set_cdev:
+	fsg_common_free_buffers(fsg_opts->common);
+fail2:
+	usb_put_function_instance(fi_msg);
+fail1:
+	usb_put_function_instance(fi_acm);
+fail0:
+#ifdef USB_ETH_RNDIS
+	usb_put_function_instance(fi_rndis);
+fail:
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+	usb_put_function_instance(fi_ecm);
+#endif
+	return status;
+}
+
+static int multi_unbind(struct usb_composite_dev *cdev)
+{
+#ifdef CONFIG_USB_G_MULTI_CDC
+	usb_put_function(f_msg_multi);
+#endif
+#ifdef USB_ETH_RNDIS
+	usb_put_function(f_msg_rndis);
+#endif
+	usb_put_function_instance(fi_msg);
+#ifdef CONFIG_USB_G_MULTI_CDC
+	usb_put_function(f_acm_multi);
+#endif
+#ifdef USB_ETH_RNDIS
+	usb_put_function(f_acm_rndis);
+#endif
+	usb_put_function_instance(fi_acm);
+#ifdef USB_ETH_RNDIS
+	usb_put_function(f_rndis);
+	usb_put_function_instance(fi_rndis);
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+	usb_put_function(f_ecm);
+	usb_put_function_instance(fi_ecm);
+#endif
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+
+	return 0;
+}
+
+
+/****************************** Some noise ******************************/
+
+
+static struct usb_composite_driver multi_driver = {
+	.name		= "g_multi",
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_SUPER,
+	.bind		= multi_bind,
+	.unbind		= multi_unbind,
+	.needs_serial	= 1,
+};
+
+module_usb_composite_driver(multi_driver);
diff --git a/drivers/usb/gadget/legacy/ncm.c b/drivers/usb/gadget/legacy/ncm.c
new file mode 100644
index 000000000..0f1b45e3a
--- /dev/null
+++ b/drivers/usb/gadget/legacy/ncm.c
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ncm.c -- NCM gadget driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Contact: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
+ *
+ * The driver borrows from ether.c which is:
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
+ */
+
+/* #define DEBUG */
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb/composite.h>
+
+#include "u_ether.h"
+#include "u_ncm.h"
+
+#define DRIVER_DESC		"NCM Gadget"
+
+/*-------------------------------------------------------------------------*/
+
+/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
+
+/* Thanks to NetChip Technologies for donating this product ID.
+ * It's for devices with only CDC Ethernet configurations.
+ */
+#define CDC_VENDOR_NUM		0x0525	/* NetChip */
+#define CDC_PRODUCT_NUM		0xa4a1	/* Linux-USB Ethernet Gadget */
+
+/*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
+
+USB_ETHERNET_MODULE_PARAMETERS();
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	/* .bcdUSB = DYNAMIC */
+
+	.bDeviceClass =		USB_CLASS_COMM,
+	.bDeviceSubClass =	0,
+	.bDeviceProtocol =	0,
+	/* .bMaxPacketSize0 = f(hardware) */
+
+	/* Vendor and product id defaults change according to what configs
+	 * we support.  (As does bNumConfigurations.)  These values can
+	 * also be overridden by module parameters.
+	 */
+	.idVendor =		cpu_to_le16 (CDC_VENDOR_NUM),
+	.idProduct =		cpu_to_le16 (CDC_PRODUCT_NUM),
+	/* .bcdDevice = f(hardware) */
+	/* .iManufacturer = DYNAMIC */
+	/* .iProduct = DYNAMIC */
+	/* NO SERIAL NUMBER */
+	.bNumConfigurations =	1,
+};
+
+static const struct usb_descriptor_header *otg_desc[2];
+
+/* string IDs are assigned dynamically */
+static struct usb_string strings_dev[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+static struct usb_function_instance *f_ncm_inst;
+static struct usb_function *f_ncm;
+
+/*-------------------------------------------------------------------------*/
+
+static int ncm_do_config(struct usb_configuration *c)
+{
+	int status;
+
+	/* FIXME alloc iConfiguration string, set it in c->strings */
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	f_ncm = usb_get_function(f_ncm_inst);
+	if (IS_ERR(f_ncm))
+		return PTR_ERR(f_ncm);
+
+	status = usb_add_function(c, f_ncm);
+	if (status < 0) {
+		usb_put_function(f_ncm);
+		return status;
+	}
+
+	return 0;
+}
+
+static struct usb_configuration ncm_config_driver = {
+	/* .label = f(hardware) */
+	.label			= "CDC Ethernet (NCM)",
+	.bConfigurationValue	= 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int gncm_bind(struct usb_composite_dev *cdev)
+{
+	struct usb_gadget	*gadget = cdev->gadget;
+	struct f_ncm_opts	*ncm_opts;
+	int			status;
+
+	f_ncm_inst = usb_get_function_instance("ncm");
+	if (IS_ERR(f_ncm_inst))
+		return PTR_ERR(f_ncm_inst);
+
+	ncm_opts = container_of(f_ncm_inst, struct f_ncm_opts, func_inst);
+
+	gether_set_qmult(ncm_opts->net, qmult);
+	if (!gether_set_host_addr(ncm_opts->net, host_addr))
+		pr_info("using host ethernet address: %s", host_addr);
+	if (!gether_set_dev_addr(ncm_opts->net, dev_addr))
+		pr_info("using self ethernet address: %s", dev_addr);
+
+	/* Allocate string descriptor numbers ... note that string
+	 * contents can be overridden by the composite_dev glue.
+	 */
+
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (status < 0)
+		goto fail;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+
+	if (gadget_is_otg(gadget) && !otg_desc[0]) {
+		struct usb_descriptor_header *usb_desc;
+
+		usb_desc = usb_otg_descriptor_alloc(gadget);
+		if (!usb_desc) {
+			status = -ENOMEM;
+			goto fail;
+		}
+		usb_otg_descriptor_init(gadget, usb_desc);
+		otg_desc[0] = usb_desc;
+		otg_desc[1] = NULL;
+	}
+
+	status = usb_add_config(cdev, &ncm_config_driver,
+				ncm_do_config);
+	if (status < 0)
+		goto fail1;
+
+	usb_composite_overwrite_options(cdev, &coverwrite);
+	dev_info(&gadget->dev, "%s\n", DRIVER_DESC);
+
+	return 0;
+
+fail1:
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+fail:
+	usb_put_function_instance(f_ncm_inst);
+	return status;
+}
+
+static int gncm_unbind(struct usb_composite_dev *cdev)
+{
+	if (!IS_ERR_OR_NULL(f_ncm))
+		usb_put_function(f_ncm);
+	if (!IS_ERR_OR_NULL(f_ncm_inst))
+		usb_put_function_instance(f_ncm_inst);
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+
+	return 0;
+}
+
+static struct usb_composite_driver ncm_driver = {
+	.name		= "g_ncm",
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_SUPER,
+	.bind		= gncm_bind,
+	.unbind		= gncm_unbind,
+};
+
+module_usb_composite_driver(ncm_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Yauheni Kaliuta");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/legacy/nokia.c b/drivers/usb/gadget/legacy/nokia.c
new file mode 100644
index 000000000..2e15f9a32
--- /dev/null
+++ b/drivers/usb/gadget/legacy/nokia.c
@@ -0,0 +1,432 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * nokia.c -- Nokia Composite Gadget Driver
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This gadget driver borrows from serial.c which is:
+ *
+ * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
+ * Copyright (C) 2008 by David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+
+#include "u_serial.h"
+#include "u_ether.h"
+#include "u_phonet.h"
+#include "u_ecm.h"
+#include "f_mass_storage.h"
+
+/* Defines */
+
+#define NOKIA_VERSION_NUM		0x0211
+#define NOKIA_LONG_NAME			"N900 (PC-Suite Mode)"
+
+USB_GADGET_COMPOSITE_OPTIONS();
+
+USB_ETHERNET_MODULE_PARAMETERS();
+
+static struct fsg_module_parameters fsg_mod_data = {
+	.stall = 0,
+	.luns = 2,
+	.removable_count = 2,
+	.removable = { 1, 1, },
+};
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
+
+#else
+
+/*
+ * Number of buffers we will use.
+ * 2 is usually enough for good buffering pipeline
+ */
+#define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
+
+#endif /* CONFIG_USB_DEBUG */
+
+FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
+
+#define NOKIA_VENDOR_ID			0x0421	/* Nokia */
+#define NOKIA_PRODUCT_ID		0x01c8	/* Nokia Gadget */
+
+/* string IDs are assigned dynamically */
+
+#define STRING_DESCRIPTION_IDX		USB_GADGET_FIRST_AVAIL_IDX
+
+static char manufacturer_nokia[] = "Nokia";
+static const char description_nokia[] = "PC-Suite Configuration";
+
+static struct usb_string strings_dev[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer_nokia,
+	[USB_GADGET_PRODUCT_IDX].s = NOKIA_LONG_NAME,
+	[USB_GADGET_SERIAL_IDX].s = "",
+	[STRING_DESCRIPTION_IDX].s = description_nokia,
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+static struct usb_device_descriptor device_desc = {
+	.bLength		= USB_DT_DEVICE_SIZE,
+	.bDescriptorType	= USB_DT_DEVICE,
+	/* .bcdUSB = DYNAMIC */
+	.bDeviceClass		= USB_CLASS_COMM,
+	.idVendor		= cpu_to_le16(NOKIA_VENDOR_ID),
+	.idProduct		= cpu_to_le16(NOKIA_PRODUCT_ID),
+	.bcdDevice		= cpu_to_le16(NOKIA_VERSION_NUM),
+	/* .iManufacturer = DYNAMIC */
+	/* .iProduct = DYNAMIC */
+	.bNumConfigurations =	1,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Module */
+MODULE_DESCRIPTION("Nokia composite gadget driver for N900");
+MODULE_AUTHOR("Felipe Balbi");
+MODULE_LICENSE("GPL");
+
+/*-------------------------------------------------------------------------*/
+static struct usb_function *f_acm_cfg1;
+static struct usb_function *f_acm_cfg2;
+static struct usb_function *f_ecm_cfg1;
+static struct usb_function *f_ecm_cfg2;
+static struct usb_function *f_obex1_cfg1;
+static struct usb_function *f_obex2_cfg1;
+static struct usb_function *f_obex1_cfg2;
+static struct usb_function *f_obex2_cfg2;
+static struct usb_function *f_phonet_cfg1;
+static struct usb_function *f_phonet_cfg2;
+static struct usb_function *f_msg_cfg1;
+static struct usb_function *f_msg_cfg2;
+
+
+static struct usb_configuration nokia_config_500ma_driver = {
+	.label		= "Bus Powered",
+	.bConfigurationValue = 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes	= USB_CONFIG_ATT_ONE,
+	.MaxPower	= 500,
+};
+
+static struct usb_configuration nokia_config_100ma_driver = {
+	.label		= "Self Powered",
+	.bConfigurationValue = 2,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes	= USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+	.MaxPower	= 100,
+};
+
+static struct usb_function_instance *fi_acm;
+static struct usb_function_instance *fi_ecm;
+static struct usb_function_instance *fi_obex1;
+static struct usb_function_instance *fi_obex2;
+static struct usb_function_instance *fi_phonet;
+static struct usb_function_instance *fi_msg;
+
+static int nokia_bind_config(struct usb_configuration *c)
+{
+	struct usb_function *f_acm;
+	struct usb_function *f_phonet = NULL;
+	struct usb_function *f_obex1 = NULL;
+	struct usb_function *f_ecm;
+	struct usb_function *f_obex2 = NULL;
+	struct usb_function *f_msg;
+	int status = 0;
+	int obex1_stat = -1;
+	int obex2_stat = -1;
+	int phonet_stat = -1;
+
+	if (!IS_ERR(fi_phonet)) {
+		f_phonet = usb_get_function(fi_phonet);
+		if (IS_ERR(f_phonet))
+			pr_debug("could not get phonet function\n");
+	}
+
+	if (!IS_ERR(fi_obex1)) {
+		f_obex1 = usb_get_function(fi_obex1);
+		if (IS_ERR(f_obex1))
+			pr_debug("could not get obex function 0\n");
+	}
+
+	if (!IS_ERR(fi_obex2)) {
+		f_obex2 = usb_get_function(fi_obex2);
+		if (IS_ERR(f_obex2))
+			pr_debug("could not get obex function 1\n");
+	}
+
+	f_acm = usb_get_function(fi_acm);
+	if (IS_ERR(f_acm)) {
+		status = PTR_ERR(f_acm);
+		goto err_get_acm;
+	}
+
+	f_ecm = usb_get_function(fi_ecm);
+	if (IS_ERR(f_ecm)) {
+		status = PTR_ERR(f_ecm);
+		goto err_get_ecm;
+	}
+
+	f_msg = usb_get_function(fi_msg);
+	if (IS_ERR(f_msg)) {
+		status = PTR_ERR(f_msg);
+		goto err_get_msg;
+	}
+
+	if (!IS_ERR_OR_NULL(f_phonet)) {
+		phonet_stat = usb_add_function(c, f_phonet);
+		if (phonet_stat)
+			pr_debug("could not add phonet function\n");
+	}
+
+	if (!IS_ERR_OR_NULL(f_obex1)) {
+		obex1_stat = usb_add_function(c, f_obex1);
+		if (obex1_stat)
+			pr_debug("could not add obex function 0\n");
+	}
+
+	if (!IS_ERR_OR_NULL(f_obex2)) {
+		obex2_stat = usb_add_function(c, f_obex2);
+		if (obex2_stat)
+			pr_debug("could not add obex function 1\n");
+	}
+
+	status = usb_add_function(c, f_acm);
+	if (status)
+		goto err_conf;
+
+	status = usb_add_function(c, f_ecm);
+	if (status) {
+		pr_debug("could not bind ecm config %d\n", status);
+		goto err_ecm;
+	}
+
+	status = usb_add_function(c, f_msg);
+	if (status)
+		goto err_msg;
+
+	if (c == &nokia_config_500ma_driver) {
+		f_acm_cfg1 = f_acm;
+		f_ecm_cfg1 = f_ecm;
+		f_phonet_cfg1 = f_phonet;
+		f_obex1_cfg1 = f_obex1;
+		f_obex2_cfg1 = f_obex2;
+		f_msg_cfg1 = f_msg;
+	} else {
+		f_acm_cfg2 = f_acm;
+		f_ecm_cfg2 = f_ecm;
+		f_phonet_cfg2 = f_phonet;
+		f_obex1_cfg2 = f_obex1;
+		f_obex2_cfg2 = f_obex2;
+		f_msg_cfg2 = f_msg;
+	}
+
+	return status;
+err_msg:
+	usb_remove_function(c, f_ecm);
+err_ecm:
+	usb_remove_function(c, f_acm);
+err_conf:
+	if (!obex2_stat)
+		usb_remove_function(c, f_obex2);
+	if (!obex1_stat)
+		usb_remove_function(c, f_obex1);
+	if (!phonet_stat)
+		usb_remove_function(c, f_phonet);
+	usb_put_function(f_msg);
+err_get_msg:
+	usb_put_function(f_ecm);
+err_get_ecm:
+	usb_put_function(f_acm);
+err_get_acm:
+	if (!IS_ERR_OR_NULL(f_obex2))
+		usb_put_function(f_obex2);
+	if (!IS_ERR_OR_NULL(f_obex1))
+		usb_put_function(f_obex1);
+	if (!IS_ERR_OR_NULL(f_phonet))
+		usb_put_function(f_phonet);
+	return status;
+}
+
+static int nokia_bind(struct usb_composite_dev *cdev)
+{
+	struct usb_gadget	*gadget = cdev->gadget;
+	struct fsg_opts		*fsg_opts;
+	struct fsg_config	fsg_config;
+	int			status;
+
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (status < 0)
+		goto err_usb;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+	status = strings_dev[STRING_DESCRIPTION_IDX].id;
+	nokia_config_500ma_driver.iConfiguration = status;
+	nokia_config_100ma_driver.iConfiguration = status;
+
+	if (!gadget_is_altset_supported(gadget)) {
+		status = -ENODEV;
+		goto err_usb;
+	}
+
+	fi_phonet = usb_get_function_instance("phonet");
+	if (IS_ERR(fi_phonet))
+		pr_debug("could not find phonet function\n");
+
+	fi_obex1 = usb_get_function_instance("obex");
+	if (IS_ERR(fi_obex1))
+		pr_debug("could not find obex function 1\n");
+
+	fi_obex2 = usb_get_function_instance("obex");
+	if (IS_ERR(fi_obex2))
+		pr_debug("could not find obex function 2\n");
+
+	fi_acm = usb_get_function_instance("acm");
+	if (IS_ERR(fi_acm)) {
+		status = PTR_ERR(fi_acm);
+		goto err_obex2_inst;
+	}
+
+	fi_ecm = usb_get_function_instance("ecm");
+	if (IS_ERR(fi_ecm)) {
+		status = PTR_ERR(fi_ecm);
+		goto err_acm_inst;
+	}
+
+	fi_msg = usb_get_function_instance("mass_storage");
+	if (IS_ERR(fi_msg)) {
+		status = PTR_ERR(fi_msg);
+		goto err_ecm_inst;
+	}
+
+	/* set up mass storage function */
+	fsg_config_from_params(&fsg_config, &fsg_mod_data, fsg_num_buffers);
+	fsg_config.vendor_name = "Nokia";
+	fsg_config.product_name = "N900";
+
+	fsg_opts = fsg_opts_from_func_inst(fi_msg);
+	fsg_opts->no_configfs = true;
+
+	status = fsg_common_set_num_buffers(fsg_opts->common, fsg_num_buffers);
+	if (status)
+		goto err_msg_inst;
+
+	status = fsg_common_set_cdev(fsg_opts->common, cdev, fsg_config.can_stall);
+	if (status)
+		goto err_msg_buf;
+
+	fsg_common_set_sysfs(fsg_opts->common, true);
+
+	status = fsg_common_create_luns(fsg_opts->common, &fsg_config);
+	if (status)
+		goto err_msg_buf;
+
+	fsg_common_set_inquiry_string(fsg_opts->common, fsg_config.vendor_name,
+				      fsg_config.product_name);
+
+	/* finally register the configuration */
+	status = usb_add_config(cdev, &nokia_config_500ma_driver,
+			nokia_bind_config);
+	if (status < 0)
+		goto err_msg_luns;
+
+	status = usb_add_config(cdev, &nokia_config_100ma_driver,
+			nokia_bind_config);
+	if (status < 0)
+		goto err_put_cfg1;
+
+	usb_composite_overwrite_options(cdev, &coverwrite);
+	dev_info(&gadget->dev, "%s\n", NOKIA_LONG_NAME);
+
+	return 0;
+
+err_put_cfg1:
+	usb_put_function(f_acm_cfg1);
+	if (!IS_ERR_OR_NULL(f_obex1_cfg1))
+		usb_put_function(f_obex1_cfg1);
+	if (!IS_ERR_OR_NULL(f_obex2_cfg1))
+		usb_put_function(f_obex2_cfg1);
+	if (!IS_ERR_OR_NULL(f_phonet_cfg1))
+		usb_put_function(f_phonet_cfg1);
+	usb_put_function(f_ecm_cfg1);
+err_msg_luns:
+	fsg_common_remove_luns(fsg_opts->common);
+err_msg_buf:
+	fsg_common_free_buffers(fsg_opts->common);
+err_msg_inst:
+	usb_put_function_instance(fi_msg);
+err_ecm_inst:
+	usb_put_function_instance(fi_ecm);
+err_acm_inst:
+	usb_put_function_instance(fi_acm);
+err_obex2_inst:
+	if (!IS_ERR(fi_obex2))
+		usb_put_function_instance(fi_obex2);
+	if (!IS_ERR(fi_obex1))
+		usb_put_function_instance(fi_obex1);
+	if (!IS_ERR(fi_phonet))
+		usb_put_function_instance(fi_phonet);
+err_usb:
+	return status;
+}
+
+static int nokia_unbind(struct usb_composite_dev *cdev)
+{
+	if (!IS_ERR_OR_NULL(f_obex1_cfg2))
+		usb_put_function(f_obex1_cfg2);
+	if (!IS_ERR_OR_NULL(f_obex2_cfg2))
+		usb_put_function(f_obex2_cfg2);
+	if (!IS_ERR_OR_NULL(f_obex1_cfg1))
+		usb_put_function(f_obex1_cfg1);
+	if (!IS_ERR_OR_NULL(f_obex2_cfg1))
+		usb_put_function(f_obex2_cfg1);
+	if (!IS_ERR_OR_NULL(f_phonet_cfg1))
+		usb_put_function(f_phonet_cfg1);
+	if (!IS_ERR_OR_NULL(f_phonet_cfg2))
+		usb_put_function(f_phonet_cfg2);
+	usb_put_function(f_acm_cfg1);
+	usb_put_function(f_acm_cfg2);
+	usb_put_function(f_ecm_cfg1);
+	usb_put_function(f_ecm_cfg2);
+	usb_put_function(f_msg_cfg1);
+	usb_put_function(f_msg_cfg2);
+
+	usb_put_function_instance(fi_msg);
+	usb_put_function_instance(fi_ecm);
+	if (!IS_ERR(fi_obex2))
+		usb_put_function_instance(fi_obex2);
+	if (!IS_ERR(fi_obex1))
+		usb_put_function_instance(fi_obex1);
+	if (!IS_ERR(fi_phonet))
+		usb_put_function_instance(fi_phonet);
+	usb_put_function_instance(fi_acm);
+
+	return 0;
+}
+
+static struct usb_composite_driver nokia_driver = {
+	.name		= "g_nokia",
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_HIGH,
+	.bind		= nokia_bind,
+	.unbind		= nokia_unbind,
+};
+
+module_usb_composite_driver(nokia_driver);
diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
new file mode 100644
index 000000000..ed762ba9b
--- /dev/null
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * printer.c -- Printer gadget driver
+ *
+ * Copyright (C) 2003-2005 David Brownell
+ * Copyright (C) 2006 Craig W. Nadler
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <asm/byteorder.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/g_printer.h>
+
+USB_GADGET_COMPOSITE_OPTIONS();
+
+#define DRIVER_DESC		"Printer Gadget"
+#define DRIVER_VERSION		"2015 FEB 17"
+
+static const char shortname [] = "printer";
+
+#include "u_printer.h"
+
+/*-------------------------------------------------------------------------*/
+
+/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
+
+/* Thanks to NetChip Technologies for donating this product ID.
+ */
+#define PRINTER_VENDOR_NUM	0x0525		/* NetChip */
+#define PRINTER_PRODUCT_NUM	0xa4a8		/* Linux-USB Printer Gadget */
+
+/* Some systems will want different product identifiers published in the
+ * device descriptor, either numbers or strings or both.  These string
+ * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
+ */
+
+module_param_named(iSerialNum, coverwrite.serial_number, charp, S_IRUGO);
+MODULE_PARM_DESC(iSerialNum, "1");
+
+static char *iPNPstring;
+module_param(iPNPstring, charp, S_IRUGO);
+MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;");
+
+/* Number of requests to allocate per endpoint, not used for ep0. */
+static unsigned qlen = 10;
+module_param(qlen, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(qlen, "The number of 8k buffers to use per endpoint");
+
+#define QLEN	qlen
+
+static struct usb_function_instance *fi_printer;
+static struct usb_function *f_printer;
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * DESCRIPTORS ... most are static, but strings and (full) configuration
+ * descriptors are built on demand.
+ */
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+	/* .bcdUSB = DYNAMIC */
+	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
+	.bDeviceSubClass =	0,
+	.bDeviceProtocol =	0,
+	.idVendor =		cpu_to_le16(PRINTER_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(PRINTER_PRODUCT_NUM),
+	.bNumConfigurations =	1
+};
+
+static const struct usb_descriptor_header *otg_desc[2];
+
+/*-------------------------------------------------------------------------*/
+
+/* descriptors that are built on-demand */
+
+static char				product_desc [40] = DRIVER_DESC;
+static char				serial_num [40] = "1";
+static char				*pnp_string =
+	"MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;";
+
+/* static strings, in UTF-8 */
+static struct usb_string		strings [] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = product_desc,
+	[USB_GADGET_SERIAL_IDX].s =	serial_num,
+	{  }		/* end of list */
+};
+
+static struct usb_gadget_strings	stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+static struct usb_configuration printer_cfg_driver = {
+	.label			= "printer",
+	.bConfigurationValue	= 1,
+	.bmAttributes		= USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+};
+
+static int printer_do_config(struct usb_configuration *c)
+{
+	struct usb_gadget	*gadget = c->cdev->gadget;
+	int			status = 0;
+
+	usb_ep_autoconfig_reset(gadget);
+
+	usb_gadget_set_selfpowered(gadget);
+
+	if (gadget_is_otg(gadget)) {
+		printer_cfg_driver.descriptors = otg_desc;
+		printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	f_printer = usb_get_function(fi_printer);
+	if (IS_ERR(f_printer))
+		return PTR_ERR(f_printer);
+
+	status = usb_add_function(c, f_printer);
+	if (status < 0)
+		usb_put_function(f_printer);
+
+	return status;
+}
+
+static int printer_bind(struct usb_composite_dev *cdev)
+{
+	struct f_printer_opts *opts;
+	int ret;
+
+	fi_printer = usb_get_function_instance("printer");
+	if (IS_ERR(fi_printer))
+		return PTR_ERR(fi_printer);
+
+	opts = container_of(fi_printer, struct f_printer_opts, func_inst);
+	opts->minor = 0;
+	opts->q_len = QLEN;
+	if (iPNPstring) {
+		opts->pnp_string = kstrdup(iPNPstring, GFP_KERNEL);
+		if (!opts->pnp_string) {
+			ret = -ENOMEM;
+			goto fail_put_func_inst;
+		}
+		opts->pnp_string_allocated = true;
+		/*
+		 * we don't free this memory in case of error
+		 * as printer cleanup func will do this for us
+		 */
+	} else {
+		opts->pnp_string = pnp_string;
+	}
+
+	ret = usb_string_ids_tab(cdev, strings);
+	if (ret < 0)
+		goto fail_put_func_inst;
+
+	device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id;
+	device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id;
+
+	if (gadget_is_otg(cdev->gadget) && !otg_desc[0]) {
+		struct usb_descriptor_header *usb_desc;
+
+		usb_desc = usb_otg_descriptor_alloc(cdev->gadget);
+		if (!usb_desc) {
+			ret = -ENOMEM;
+			goto fail_put_func_inst;
+		}
+		usb_otg_descriptor_init(cdev->gadget, usb_desc);
+		otg_desc[0] = usb_desc;
+		otg_desc[1] = NULL;
+	}
+
+	ret = usb_add_config(cdev, &printer_cfg_driver, printer_do_config);
+	if (ret)
+		goto fail_free_otg_desc;
+
+	usb_composite_overwrite_options(cdev, &coverwrite);
+	return ret;
+
+fail_free_otg_desc:
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+fail_put_func_inst:
+	usb_put_function_instance(fi_printer);
+	return ret;
+}
+
+static int printer_unbind(struct usb_composite_dev *cdev)
+{
+	usb_put_function(f_printer);
+	usb_put_function_instance(fi_printer);
+
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+
+	return 0;
+}
+
+static struct usb_composite_driver printer_driver = {
+	.name           = shortname,
+	.dev            = &device_desc,
+	.strings        = dev_strings,
+	.max_speed      = USB_SPEED_SUPER,
+	.bind		= printer_bind,
+	.unbind		= printer_unbind,
+};
+
+module_usb_composite_driver(printer_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Craig Nadler");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/legacy/raw_gadget.c b/drivers/usb/gadget/legacy/raw_gadget.c
new file mode 100644
index 000000000..ea106ad66
--- /dev/null
+++ b/drivers/usb/gadget/legacy/raw_gadget.c
@@ -0,0 +1,1331 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Raw Gadget driver.
+ * See Documentation/usb/raw-gadget.rst for more details.
+ *
+ * Copyright (c) 2020 Google, Inc.
+ * Author: Andrey Konovalov <andreyknvl@gmail.com>
+ */
+
+#include <linux/compiler.h>
+#include <linux/ctype.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/idr.h>
+#include <linux/kref.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/semaphore.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/wait.h>
+
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/ch11.h>
+#include <linux/usb/gadget.h>
+
+#include <uapi/linux/usb/raw_gadget.h>
+
+#define	DRIVER_DESC "USB Raw Gadget"
+#define DRIVER_NAME "raw-gadget"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Andrey Konovalov");
+MODULE_LICENSE("GPL");
+
+/*----------------------------------------------------------------------*/
+
+static DEFINE_IDA(driver_id_numbers);
+#define DRIVER_DRIVER_NAME_LENGTH_MAX	32
+
+#define RAW_EVENT_QUEUE_SIZE	16
+
+struct raw_event_queue {
+	/* See the comment in raw_event_queue_fetch() for locking details. */
+	spinlock_t		lock;
+	struct semaphore	sema;
+	struct usb_raw_event	*events[RAW_EVENT_QUEUE_SIZE];
+	int			size;
+};
+
+static void raw_event_queue_init(struct raw_event_queue *queue)
+{
+	spin_lock_init(&queue->lock);
+	sema_init(&queue->sema, 0);
+	queue->size = 0;
+}
+
+static int raw_event_queue_add(struct raw_event_queue *queue,
+	enum usb_raw_event_type type, size_t length, const void *data)
+{
+	unsigned long flags;
+	struct usb_raw_event *event;
+
+	spin_lock_irqsave(&queue->lock, flags);
+	if (WARN_ON(queue->size >= RAW_EVENT_QUEUE_SIZE)) {
+		spin_unlock_irqrestore(&queue->lock, flags);
+		return -ENOMEM;
+	}
+	event = kmalloc(sizeof(*event) + length, GFP_ATOMIC);
+	if (!event) {
+		spin_unlock_irqrestore(&queue->lock, flags);
+		return -ENOMEM;
+	}
+	event->type = type;
+	event->length = length;
+	if (event->length)
+		memcpy(&event->data[0], data, length);
+	queue->events[queue->size] = event;
+	queue->size++;
+	up(&queue->sema);
+	spin_unlock_irqrestore(&queue->lock, flags);
+	return 0;
+}
+
+static struct usb_raw_event *raw_event_queue_fetch(
+				struct raw_event_queue *queue)
+{
+	int ret;
+	unsigned long flags;
+	struct usb_raw_event *event;
+
+	/*
+	 * This function can be called concurrently. We first check that
+	 * there's at least one event queued by decrementing the semaphore,
+	 * and then take the lock to protect queue struct fields.
+	 */
+	ret = down_interruptible(&queue->sema);
+	if (ret)
+		return ERR_PTR(ret);
+	spin_lock_irqsave(&queue->lock, flags);
+	/*
+	 * queue->size must have the same value as queue->sema counter (before
+	 * the down_interruptible() call above), so this check is a fail-safe.
+	 */
+	if (WARN_ON(!queue->size)) {
+		spin_unlock_irqrestore(&queue->lock, flags);
+		return ERR_PTR(-ENODEV);
+	}
+	event = queue->events[0];
+	queue->size--;
+	memmove(&queue->events[0], &queue->events[1],
+			queue->size * sizeof(queue->events[0]));
+	spin_unlock_irqrestore(&queue->lock, flags);
+	return event;
+}
+
+static void raw_event_queue_destroy(struct raw_event_queue *queue)
+{
+	int i;
+
+	for (i = 0; i < queue->size; i++)
+		kfree(queue->events[i]);
+	queue->size = 0;
+}
+
+/*----------------------------------------------------------------------*/
+
+struct raw_dev;
+
+enum ep_state {
+	STATE_EP_DISABLED,
+	STATE_EP_ENABLED,
+};
+
+struct raw_ep {
+	struct raw_dev		*dev;
+	enum ep_state		state;
+	struct usb_ep		*ep;
+	u8			addr;
+	struct usb_request	*req;
+	bool			urb_queued;
+	bool			disabling;
+	ssize_t			status;
+};
+
+enum dev_state {
+	STATE_DEV_INVALID = 0,
+	STATE_DEV_OPENED,
+	STATE_DEV_INITIALIZED,
+	STATE_DEV_REGISTERING,
+	STATE_DEV_RUNNING,
+	STATE_DEV_CLOSED,
+	STATE_DEV_FAILED
+};
+
+struct raw_dev {
+	struct kref			count;
+	spinlock_t			lock;
+
+	const char			*udc_name;
+	struct usb_gadget_driver	driver;
+
+	/* Reference to misc device: */
+	struct device			*dev;
+
+	/* Make driver names unique */
+	int				driver_id_number;
+
+	/* Protected by lock: */
+	enum dev_state			state;
+	bool				gadget_registered;
+	struct usb_gadget		*gadget;
+	struct usb_request		*req;
+	bool				ep0_in_pending;
+	bool				ep0_out_pending;
+	bool				ep0_urb_queued;
+	ssize_t				ep0_status;
+	struct raw_ep			eps[USB_RAW_EPS_NUM_MAX];
+	int				eps_num;
+
+	struct completion		ep0_done;
+	struct raw_event_queue		queue;
+};
+
+static struct raw_dev *dev_new(void)
+{
+	struct raw_dev *dev;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return NULL;
+	/* Matches kref_put() in raw_release(). */
+	kref_init(&dev->count);
+	spin_lock_init(&dev->lock);
+	init_completion(&dev->ep0_done);
+	raw_event_queue_init(&dev->queue);
+	dev->driver_id_number = -1;
+	return dev;
+}
+
+static void dev_free(struct kref *kref)
+{
+	struct raw_dev *dev = container_of(kref, struct raw_dev, count);
+	int i;
+
+	kfree(dev->udc_name);
+	kfree(dev->driver.udc_name);
+	kfree(dev->driver.driver.name);
+	if (dev->driver_id_number >= 0)
+		ida_free(&driver_id_numbers, dev->driver_id_number);
+	if (dev->req) {
+		if (dev->ep0_urb_queued)
+			usb_ep_dequeue(dev->gadget->ep0, dev->req);
+		usb_ep_free_request(dev->gadget->ep0, dev->req);
+	}
+	raw_event_queue_destroy(&dev->queue);
+	for (i = 0; i < dev->eps_num; i++) {
+		if (dev->eps[i].state == STATE_EP_DISABLED)
+			continue;
+		usb_ep_disable(dev->eps[i].ep);
+		usb_ep_free_request(dev->eps[i].ep, dev->eps[i].req);
+		kfree(dev->eps[i].ep->desc);
+		dev->eps[i].state = STATE_EP_DISABLED;
+	}
+	kfree(dev);
+}
+
+/*----------------------------------------------------------------------*/
+
+static int raw_queue_event(struct raw_dev *dev,
+	enum usb_raw_event_type type, size_t length, const void *data)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	ret = raw_event_queue_add(&dev->queue, type, length, data);
+	if (ret < 0) {
+		spin_lock_irqsave(&dev->lock, flags);
+		dev->state = STATE_DEV_FAILED;
+		spin_unlock_irqrestore(&dev->lock, flags);
+	}
+	return ret;
+}
+
+static void gadget_ep0_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct raw_dev *dev = req->context;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (req->status)
+		dev->ep0_status = req->status;
+	else
+		dev->ep0_status = req->actual;
+	if (dev->ep0_in_pending)
+		dev->ep0_in_pending = false;
+	else
+		dev->ep0_out_pending = false;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	complete(&dev->ep0_done);
+}
+
+static u8 get_ep_addr(const char *name)
+{
+	/* If the endpoint has fixed function (named as e.g. "ep12out-bulk"),
+	 * parse the endpoint address from its name. We deliberately use
+	 * deprecated simple_strtoul() function here, as the number isn't
+	 * followed by '\0' nor '\n'.
+	 */
+	if (isdigit(name[2]))
+		return simple_strtoul(&name[2], NULL, 10);
+	/* Otherwise the endpoint is configurable (named as e.g. "ep-a"). */
+	return USB_RAW_EP_ADDR_ANY;
+}
+
+static int gadget_bind(struct usb_gadget *gadget,
+			struct usb_gadget_driver *driver)
+{
+	int ret = 0, i = 0;
+	struct raw_dev *dev = container_of(driver, struct raw_dev, driver);
+	struct usb_request *req;
+	struct usb_ep *ep;
+	unsigned long flags;
+
+	if (strcmp(gadget->name, dev->udc_name) != 0)
+		return -ENODEV;
+
+	set_gadget_data(gadget, dev);
+	req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
+	if (!req) {
+		dev_err(&gadget->dev, "usb_ep_alloc_request failed\n");
+		set_gadget_data(gadget, NULL);
+		return -ENOMEM;
+	}
+
+	spin_lock_irqsave(&dev->lock, flags);
+	dev->req = req;
+	dev->req->context = dev;
+	dev->req->complete = gadget_ep0_complete;
+	dev->gadget = gadget;
+	gadget_for_each_ep(ep, dev->gadget) {
+		dev->eps[i].ep = ep;
+		dev->eps[i].addr = get_ep_addr(ep->name);
+		dev->eps[i].state = STATE_EP_DISABLED;
+		i++;
+	}
+	dev->eps_num = i;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	ret = raw_queue_event(dev, USB_RAW_EVENT_CONNECT, 0, NULL);
+	if (ret < 0) {
+		dev_err(&gadget->dev, "failed to queue event\n");
+		set_gadget_data(gadget, NULL);
+		return ret;
+	}
+
+	/* Matches kref_put() in gadget_unbind(). */
+	kref_get(&dev->count);
+	return ret;
+}
+
+static void gadget_unbind(struct usb_gadget *gadget)
+{
+	struct raw_dev *dev = get_gadget_data(gadget);
+
+	set_gadget_data(gadget, NULL);
+	/* Matches kref_get() in gadget_bind(). */
+	kref_put(&dev->count, dev_free);
+}
+
+static int gadget_setup(struct usb_gadget *gadget,
+			const struct usb_ctrlrequest *ctrl)
+{
+	int ret = 0;
+	struct raw_dev *dev = get_gadget_data(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->state != STATE_DEV_RUNNING) {
+		dev_err(&gadget->dev, "ignoring, device is not running\n");
+		ret = -ENODEV;
+		goto out_unlock;
+	}
+	if (dev->ep0_in_pending || dev->ep0_out_pending) {
+		dev_dbg(&gadget->dev, "stalling, request already pending\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength)
+		dev->ep0_in_pending = true;
+	else
+		dev->ep0_out_pending = true;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	ret = raw_queue_event(dev, USB_RAW_EVENT_CONTROL, sizeof(*ctrl), ctrl);
+	if (ret < 0)
+		dev_err(&gadget->dev, "failed to queue event\n");
+	goto out;
+
+out_unlock:
+	spin_unlock_irqrestore(&dev->lock, flags);
+out:
+	return ret;
+}
+
+/* These are currently unused but present in case UDC driver requires them. */
+static void gadget_disconnect(struct usb_gadget *gadget) { }
+static void gadget_suspend(struct usb_gadget *gadget) { }
+static void gadget_resume(struct usb_gadget *gadget) { }
+static void gadget_reset(struct usb_gadget *gadget) { }
+
+/*----------------------------------------------------------------------*/
+
+static struct miscdevice raw_misc_device;
+
+static int raw_open(struct inode *inode, struct file *fd)
+{
+	struct raw_dev *dev;
+
+	/* Nonblocking I/O is not supported yet. */
+	if (fd->f_flags & O_NONBLOCK)
+		return -EINVAL;
+
+	dev = dev_new();
+	if (!dev)
+		return -ENOMEM;
+	fd->private_data = dev;
+	dev->state = STATE_DEV_OPENED;
+	dev->dev = raw_misc_device.this_device;
+	return 0;
+}
+
+static int raw_release(struct inode *inode, struct file *fd)
+{
+	int ret = 0;
+	struct raw_dev *dev = fd->private_data;
+	unsigned long flags;
+	bool unregister = false;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	dev->state = STATE_DEV_CLOSED;
+	if (!dev->gadget) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+		goto out_put;
+	}
+	if (dev->gadget_registered)
+		unregister = true;
+	dev->gadget_registered = false;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	if (unregister) {
+		ret = usb_gadget_unregister_driver(&dev->driver);
+		if (ret != 0)
+			dev_err(dev->dev,
+				"usb_gadget_unregister_driver() failed with %d\n",
+				ret);
+		/* Matches kref_get() in raw_ioctl_run(). */
+		kref_put(&dev->count, dev_free);
+	}
+
+out_put:
+	/* Matches dev_new() in raw_open(). */
+	kref_put(&dev->count, dev_free);
+	return ret;
+}
+
+/*----------------------------------------------------------------------*/
+
+static int raw_ioctl_init(struct raw_dev *dev, unsigned long value)
+{
+	int ret = 0;
+	int driver_id_number;
+	struct usb_raw_init arg;
+	char *udc_driver_name;
+	char *udc_device_name;
+	char *driver_driver_name;
+	unsigned long flags;
+
+	if (copy_from_user(&arg, (void __user *)value, sizeof(arg)))
+		return -EFAULT;
+
+	switch (arg.speed) {
+	case USB_SPEED_UNKNOWN:
+		arg.speed = USB_SPEED_HIGH;
+		break;
+	case USB_SPEED_LOW:
+	case USB_SPEED_FULL:
+	case USB_SPEED_HIGH:
+	case USB_SPEED_SUPER:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	driver_id_number = ida_alloc(&driver_id_numbers, GFP_KERNEL);
+	if (driver_id_number < 0)
+		return driver_id_number;
+
+	driver_driver_name = kmalloc(DRIVER_DRIVER_NAME_LENGTH_MAX, GFP_KERNEL);
+	if (!driver_driver_name) {
+		ret = -ENOMEM;
+		goto out_free_driver_id_number;
+	}
+	snprintf(driver_driver_name, DRIVER_DRIVER_NAME_LENGTH_MAX,
+				DRIVER_NAME ".%d", driver_id_number);
+
+	udc_driver_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL);
+	if (!udc_driver_name) {
+		ret = -ENOMEM;
+		goto out_free_driver_driver_name;
+	}
+	ret = strscpy(udc_driver_name, &arg.driver_name[0],
+				UDC_NAME_LENGTH_MAX);
+	if (ret < 0)
+		goto out_free_udc_driver_name;
+	ret = 0;
+
+	udc_device_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL);
+	if (!udc_device_name) {
+		ret = -ENOMEM;
+		goto out_free_udc_driver_name;
+	}
+	ret = strscpy(udc_device_name, &arg.device_name[0],
+				UDC_NAME_LENGTH_MAX);
+	if (ret < 0)
+		goto out_free_udc_device_name;
+	ret = 0;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->state != STATE_DEV_OPENED) {
+		dev_dbg(dev->dev, "fail, device is not opened\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	dev->udc_name = udc_driver_name;
+
+	dev->driver.function = DRIVER_DESC;
+	dev->driver.max_speed = arg.speed;
+	dev->driver.setup = gadget_setup;
+	dev->driver.disconnect = gadget_disconnect;
+	dev->driver.bind = gadget_bind;
+	dev->driver.unbind = gadget_unbind;
+	dev->driver.suspend = gadget_suspend;
+	dev->driver.resume = gadget_resume;
+	dev->driver.reset = gadget_reset;
+	dev->driver.driver.name = driver_driver_name;
+	dev->driver.udc_name = udc_device_name;
+	dev->driver.match_existing_only = 1;
+	dev->driver_id_number = driver_id_number;
+
+	dev->state = STATE_DEV_INITIALIZED;
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
+
+out_unlock:
+	spin_unlock_irqrestore(&dev->lock, flags);
+out_free_udc_device_name:
+	kfree(udc_device_name);
+out_free_udc_driver_name:
+	kfree(udc_driver_name);
+out_free_driver_driver_name:
+	kfree(driver_driver_name);
+out_free_driver_id_number:
+	ida_free(&driver_id_numbers, driver_id_number);
+	return ret;
+}
+
+static int raw_ioctl_run(struct raw_dev *dev, unsigned long value)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	if (value)
+		return -EINVAL;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->state != STATE_DEV_INITIALIZED) {
+		dev_dbg(dev->dev, "fail, device is not initialized\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	dev->state = STATE_DEV_REGISTERING;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	ret = usb_gadget_register_driver(&dev->driver);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (ret) {
+		dev_err(dev->dev,
+			"fail, usb_gadget_register_driver returned %d\n", ret);
+		dev->state = STATE_DEV_FAILED;
+		goto out_unlock;
+	}
+	dev->gadget_registered = true;
+	dev->state = STATE_DEV_RUNNING;
+	/* Matches kref_put() in raw_release(). */
+	kref_get(&dev->count);
+
+out_unlock:
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
+}
+
+static int raw_ioctl_event_fetch(struct raw_dev *dev, unsigned long value)
+{
+	struct usb_raw_event arg;
+	unsigned long flags;
+	struct usb_raw_event *event;
+	uint32_t length;
+
+	if (copy_from_user(&arg, (void __user *)value, sizeof(arg)))
+		return -EFAULT;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->state != STATE_DEV_RUNNING) {
+		dev_dbg(dev->dev, "fail, device is not running\n");
+		spin_unlock_irqrestore(&dev->lock, flags);
+		return -EINVAL;
+	}
+	if (!dev->gadget) {
+		dev_dbg(dev->dev, "fail, gadget is not bound\n");
+		spin_unlock_irqrestore(&dev->lock, flags);
+		return -EBUSY;
+	}
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	event = raw_event_queue_fetch(&dev->queue);
+	if (PTR_ERR(event) == -EINTR) {
+		dev_dbg(&dev->gadget->dev, "event fetching interrupted\n");
+		return -EINTR;
+	}
+	if (IS_ERR(event)) {
+		dev_err(&dev->gadget->dev, "failed to fetch event\n");
+		spin_lock_irqsave(&dev->lock, flags);
+		dev->state = STATE_DEV_FAILED;
+		spin_unlock_irqrestore(&dev->lock, flags);
+		return -ENODEV;
+	}
+	length = min(arg.length, event->length);
+	if (copy_to_user((void __user *)value, event, sizeof(*event) + length)) {
+		kfree(event);
+		return -EFAULT;
+	}
+
+	kfree(event);
+	return 0;
+}
+
+static void *raw_alloc_io_data(struct usb_raw_ep_io *io, void __user *ptr,
+				bool get_from_user)
+{
+	void *data;
+
+	if (copy_from_user(io, ptr, sizeof(*io)))
+		return ERR_PTR(-EFAULT);
+	if (io->ep >= USB_RAW_EPS_NUM_MAX)
+		return ERR_PTR(-EINVAL);
+	if (!usb_raw_io_flags_valid(io->flags))
+		return ERR_PTR(-EINVAL);
+	if (io->length > PAGE_SIZE)
+		return ERR_PTR(-EINVAL);
+	if (get_from_user)
+		data = memdup_user(ptr + sizeof(*io), io->length);
+	else {
+		data = kmalloc(io->length, GFP_KERNEL);
+		if (!data)
+			data = ERR_PTR(-ENOMEM);
+	}
+	return data;
+}
+
+static int raw_process_ep0_io(struct raw_dev *dev, struct usb_raw_ep_io *io,
+				void *data, bool in)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->state != STATE_DEV_RUNNING) {
+		dev_dbg(dev->dev, "fail, device is not running\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	if (!dev->gadget) {
+		dev_dbg(dev->dev, "fail, gadget is not bound\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	if (dev->ep0_urb_queued) {
+		dev_dbg(&dev->gadget->dev, "fail, urb already queued\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	if ((in && !dev->ep0_in_pending) ||
+			(!in && !dev->ep0_out_pending)) {
+		dev_dbg(&dev->gadget->dev, "fail, wrong direction\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	if (WARN_ON(in && dev->ep0_out_pending)) {
+		ret = -ENODEV;
+		dev->state = STATE_DEV_FAILED;
+		goto out_unlock;
+	}
+	if (WARN_ON(!in && dev->ep0_in_pending)) {
+		ret = -ENODEV;
+		dev->state = STATE_DEV_FAILED;
+		goto out_unlock;
+	}
+
+	dev->req->buf = data;
+	dev->req->length = io->length;
+	dev->req->zero = usb_raw_io_flags_zero(io->flags);
+	dev->ep0_urb_queued = true;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	ret = usb_ep_queue(dev->gadget->ep0, dev->req, GFP_KERNEL);
+	if (ret) {
+		dev_err(&dev->gadget->dev,
+				"fail, usb_ep_queue returned %d\n", ret);
+		spin_lock_irqsave(&dev->lock, flags);
+		dev->state = STATE_DEV_FAILED;
+		goto out_queue_failed;
+	}
+
+	ret = wait_for_completion_interruptible(&dev->ep0_done);
+	if (ret) {
+		dev_dbg(&dev->gadget->dev, "wait interrupted\n");
+		usb_ep_dequeue(dev->gadget->ep0, dev->req);
+		wait_for_completion(&dev->ep0_done);
+		spin_lock_irqsave(&dev->lock, flags);
+		if (dev->ep0_status == -ECONNRESET)
+			dev->ep0_status = -EINTR;
+		goto out_interrupted;
+	}
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+out_interrupted:
+	ret = dev->ep0_status;
+out_queue_failed:
+	dev->ep0_urb_queued = false;
+out_unlock:
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
+}
+
+static int raw_ioctl_ep0_write(struct raw_dev *dev, unsigned long value)
+{
+	int ret = 0;
+	void *data;
+	struct usb_raw_ep_io io;
+
+	data = raw_alloc_io_data(&io, (void __user *)value, true);
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+	ret = raw_process_ep0_io(dev, &io, data, true);
+	kfree(data);
+	return ret;
+}
+
+static int raw_ioctl_ep0_read(struct raw_dev *dev, unsigned long value)
+{
+	int ret = 0;
+	void *data;
+	struct usb_raw_ep_io io;
+	unsigned int length;
+
+	data = raw_alloc_io_data(&io, (void __user *)value, false);
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+	ret = raw_process_ep0_io(dev, &io, data, false);
+	if (ret < 0)
+		goto free;
+
+	length = min(io.length, (unsigned int)ret);
+	if (copy_to_user((void __user *)(value + sizeof(io)), data, length))
+		ret = -EFAULT;
+	else
+		ret = length;
+free:
+	kfree(data);
+	return ret;
+}
+
+static int raw_ioctl_ep0_stall(struct raw_dev *dev, unsigned long value)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	if (value)
+		return -EINVAL;
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->state != STATE_DEV_RUNNING) {
+		dev_dbg(dev->dev, "fail, device is not running\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	if (!dev->gadget) {
+		dev_dbg(dev->dev, "fail, gadget is not bound\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	if (dev->ep0_urb_queued) {
+		dev_dbg(&dev->gadget->dev, "fail, urb already queued\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	if (!dev->ep0_in_pending && !dev->ep0_out_pending) {
+		dev_dbg(&dev->gadget->dev, "fail, no request pending\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+
+	ret = usb_ep_set_halt(dev->gadget->ep0);
+	if (ret < 0)
+		dev_err(&dev->gadget->dev,
+				"fail, usb_ep_set_halt returned %d\n", ret);
+
+	if (dev->ep0_in_pending)
+		dev->ep0_in_pending = false;
+	else
+		dev->ep0_out_pending = false;
+
+out_unlock:
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
+}
+
+static int raw_ioctl_ep_enable(struct raw_dev *dev, unsigned long value)
+{
+	int ret = 0, i;
+	unsigned long flags;
+	struct usb_endpoint_descriptor *desc;
+	struct raw_ep *ep;
+	bool ep_props_matched = false;
+
+	desc = memdup_user((void __user *)value, sizeof(*desc));
+	if (IS_ERR(desc))
+		return PTR_ERR(desc);
+
+	/*
+	 * Endpoints with a maxpacket length of 0 can cause crashes in UDC
+	 * drivers.
+	 */
+	if (usb_endpoint_maxp(desc) == 0) {
+		dev_dbg(dev->dev, "fail, bad endpoint maxpacket\n");
+		kfree(desc);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->state != STATE_DEV_RUNNING) {
+		dev_dbg(dev->dev, "fail, device is not running\n");
+		ret = -EINVAL;
+		goto out_free;
+	}
+	if (!dev->gadget) {
+		dev_dbg(dev->dev, "fail, gadget is not bound\n");
+		ret = -EBUSY;
+		goto out_free;
+	}
+
+	for (i = 0; i < dev->eps_num; i++) {
+		ep = &dev->eps[i];
+		if (ep->addr != usb_endpoint_num(desc) &&
+				ep->addr != USB_RAW_EP_ADDR_ANY)
+			continue;
+		if (!usb_gadget_ep_match_desc(dev->gadget, ep->ep, desc, NULL))
+			continue;
+		ep_props_matched = true;
+		if (ep->state != STATE_EP_DISABLED)
+			continue;
+		ep->ep->desc = desc;
+		ret = usb_ep_enable(ep->ep);
+		if (ret < 0) {
+			dev_err(&dev->gadget->dev,
+				"fail, usb_ep_enable returned %d\n", ret);
+			goto out_free;
+		}
+		ep->req = usb_ep_alloc_request(ep->ep, GFP_ATOMIC);
+		if (!ep->req) {
+			dev_err(&dev->gadget->dev,
+				"fail, usb_ep_alloc_request failed\n");
+			usb_ep_disable(ep->ep);
+			ret = -ENOMEM;
+			goto out_free;
+		}
+		ep->state = STATE_EP_ENABLED;
+		ep->ep->driver_data = ep;
+		ret = i;
+		goto out_unlock;
+	}
+
+	if (!ep_props_matched) {
+		dev_dbg(&dev->gadget->dev, "fail, bad endpoint descriptor\n");
+		ret = -EINVAL;
+	} else {
+		dev_dbg(&dev->gadget->dev, "fail, no endpoints available\n");
+		ret = -EBUSY;
+	}
+
+out_free:
+	kfree(desc);
+out_unlock:
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
+}
+
+static int raw_ioctl_ep_disable(struct raw_dev *dev, unsigned long value)
+{
+	int ret = 0, i = value;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->state != STATE_DEV_RUNNING) {
+		dev_dbg(dev->dev, "fail, device is not running\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	if (!dev->gadget) {
+		dev_dbg(dev->dev, "fail, gadget is not bound\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	if (i < 0 || i >= dev->eps_num) {
+		dev_dbg(dev->dev, "fail, invalid endpoint\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	if (dev->eps[i].state == STATE_EP_DISABLED) {
+		dev_dbg(&dev->gadget->dev, "fail, endpoint is not enabled\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	if (dev->eps[i].disabling) {
+		dev_dbg(&dev->gadget->dev,
+				"fail, disable already in progress\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	if (dev->eps[i].urb_queued) {
+		dev_dbg(&dev->gadget->dev,
+				"fail, waiting for urb completion\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	dev->eps[i].disabling = true;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	usb_ep_disable(dev->eps[i].ep);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	usb_ep_free_request(dev->eps[i].ep, dev->eps[i].req);
+	kfree(dev->eps[i].ep->desc);
+	dev->eps[i].state = STATE_EP_DISABLED;
+	dev->eps[i].disabling = false;
+
+out_unlock:
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
+}
+
+static int raw_ioctl_ep_set_clear_halt_wedge(struct raw_dev *dev,
+		unsigned long value, bool set, bool halt)
+{
+	int ret = 0, i = value;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->state != STATE_DEV_RUNNING) {
+		dev_dbg(dev->dev, "fail, device is not running\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	if (!dev->gadget) {
+		dev_dbg(dev->dev, "fail, gadget is not bound\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	if (i < 0 || i >= dev->eps_num) {
+		dev_dbg(dev->dev, "fail, invalid endpoint\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	if (dev->eps[i].state == STATE_EP_DISABLED) {
+		dev_dbg(&dev->gadget->dev, "fail, endpoint is not enabled\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	if (dev->eps[i].disabling) {
+		dev_dbg(&dev->gadget->dev,
+				"fail, disable is in progress\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	if (dev->eps[i].urb_queued) {
+		dev_dbg(&dev->gadget->dev,
+				"fail, waiting for urb completion\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	if (usb_endpoint_xfer_isoc(dev->eps[i].ep->desc)) {
+		dev_dbg(&dev->gadget->dev,
+				"fail, can't halt/wedge ISO endpoint\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	if (set && halt) {
+		ret = usb_ep_set_halt(dev->eps[i].ep);
+		if (ret < 0)
+			dev_err(&dev->gadget->dev,
+				"fail, usb_ep_set_halt returned %d\n", ret);
+	} else if (!set && halt) {
+		ret = usb_ep_clear_halt(dev->eps[i].ep);
+		if (ret < 0)
+			dev_err(&dev->gadget->dev,
+				"fail, usb_ep_clear_halt returned %d\n", ret);
+	} else if (set && !halt) {
+		ret = usb_ep_set_wedge(dev->eps[i].ep);
+		if (ret < 0)
+			dev_err(&dev->gadget->dev,
+				"fail, usb_ep_set_wedge returned %d\n", ret);
+	}
+
+out_unlock:
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
+}
+
+static void gadget_ep_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct raw_ep *r_ep = (struct raw_ep *)ep->driver_data;
+	struct raw_dev *dev = r_ep->dev;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (req->status)
+		r_ep->status = req->status;
+	else
+		r_ep->status = req->actual;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	complete((struct completion *)req->context);
+}
+
+static int raw_process_ep_io(struct raw_dev *dev, struct usb_raw_ep_io *io,
+				void *data, bool in)
+{
+	int ret = 0;
+	unsigned long flags;
+	struct raw_ep *ep;
+	DECLARE_COMPLETION_ONSTACK(done);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->state != STATE_DEV_RUNNING) {
+		dev_dbg(dev->dev, "fail, device is not running\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	if (!dev->gadget) {
+		dev_dbg(dev->dev, "fail, gadget is not bound\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	if (io->ep >= dev->eps_num) {
+		dev_dbg(&dev->gadget->dev, "fail, invalid endpoint\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	ep = &dev->eps[io->ep];
+	if (ep->state != STATE_EP_ENABLED) {
+		dev_dbg(&dev->gadget->dev, "fail, endpoint is not enabled\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	if (ep->disabling) {
+		dev_dbg(&dev->gadget->dev,
+				"fail, endpoint is already being disabled\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	if (ep->urb_queued) {
+		dev_dbg(&dev->gadget->dev, "fail, urb already queued\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	if (in != usb_endpoint_dir_in(ep->ep->desc)) {
+		dev_dbg(&dev->gadget->dev, "fail, wrong direction\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	ep->dev = dev;
+	ep->req->context = &done;
+	ep->req->complete = gadget_ep_complete;
+	ep->req->buf = data;
+	ep->req->length = io->length;
+	ep->req->zero = usb_raw_io_flags_zero(io->flags);
+	ep->urb_queued = true;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	ret = usb_ep_queue(ep->ep, ep->req, GFP_KERNEL);
+	if (ret) {
+		dev_err(&dev->gadget->dev,
+				"fail, usb_ep_queue returned %d\n", ret);
+		spin_lock_irqsave(&dev->lock, flags);
+		dev->state = STATE_DEV_FAILED;
+		goto out_queue_failed;
+	}
+
+	ret = wait_for_completion_interruptible(&done);
+	if (ret) {
+		dev_dbg(&dev->gadget->dev, "wait interrupted\n");
+		usb_ep_dequeue(ep->ep, ep->req);
+		wait_for_completion(&done);
+		spin_lock_irqsave(&dev->lock, flags);
+		if (ep->status == -ECONNRESET)
+			ep->status = -EINTR;
+		goto out_interrupted;
+	}
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+out_interrupted:
+	ret = ep->status;
+out_queue_failed:
+	ep->urb_queued = false;
+out_unlock:
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
+}
+
+static int raw_ioctl_ep_write(struct raw_dev *dev, unsigned long value)
+{
+	int ret = 0;
+	char *data;
+	struct usb_raw_ep_io io;
+
+	data = raw_alloc_io_data(&io, (void __user *)value, true);
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+	ret = raw_process_ep_io(dev, &io, data, true);
+	kfree(data);
+	return ret;
+}
+
+static int raw_ioctl_ep_read(struct raw_dev *dev, unsigned long value)
+{
+	int ret = 0;
+	char *data;
+	struct usb_raw_ep_io io;
+	unsigned int length;
+
+	data = raw_alloc_io_data(&io, (void __user *)value, false);
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+	ret = raw_process_ep_io(dev, &io, data, false);
+	if (ret < 0)
+		goto free;
+
+	length = min(io.length, (unsigned int)ret);
+	if (copy_to_user((void __user *)(value + sizeof(io)), data, length))
+		ret = -EFAULT;
+	else
+		ret = length;
+free:
+	kfree(data);
+	return ret;
+}
+
+static int raw_ioctl_configure(struct raw_dev *dev, unsigned long value)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	if (value)
+		return -EINVAL;
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->state != STATE_DEV_RUNNING) {
+		dev_dbg(dev->dev, "fail, device is not running\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	if (!dev->gadget) {
+		dev_dbg(dev->dev, "fail, gadget is not bound\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	usb_gadget_set_state(dev->gadget, USB_STATE_CONFIGURED);
+
+out_unlock:
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
+}
+
+static int raw_ioctl_vbus_draw(struct raw_dev *dev, unsigned long value)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->state != STATE_DEV_RUNNING) {
+		dev_dbg(dev->dev, "fail, device is not running\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	if (!dev->gadget) {
+		dev_dbg(dev->dev, "fail, gadget is not bound\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	usb_gadget_vbus_draw(dev->gadget, 2 * value);
+
+out_unlock:
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
+}
+
+static void fill_ep_caps(struct usb_ep_caps *caps,
+				struct usb_raw_ep_caps *raw_caps)
+{
+	raw_caps->type_control = caps->type_control;
+	raw_caps->type_iso = caps->type_iso;
+	raw_caps->type_bulk = caps->type_bulk;
+	raw_caps->type_int = caps->type_int;
+	raw_caps->dir_in = caps->dir_in;
+	raw_caps->dir_out = caps->dir_out;
+}
+
+static void fill_ep_limits(struct usb_ep *ep, struct usb_raw_ep_limits *limits)
+{
+	limits->maxpacket_limit = ep->maxpacket_limit;
+	limits->max_streams = ep->max_streams;
+}
+
+static int raw_ioctl_eps_info(struct raw_dev *dev, unsigned long value)
+{
+	int ret = 0, i;
+	unsigned long flags;
+	struct usb_raw_eps_info *info;
+	struct raw_ep *ep;
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->state != STATE_DEV_RUNNING) {
+		dev_dbg(dev->dev, "fail, device is not running\n");
+		ret = -EINVAL;
+		spin_unlock_irqrestore(&dev->lock, flags);
+		goto out_free;
+	}
+	if (!dev->gadget) {
+		dev_dbg(dev->dev, "fail, gadget is not bound\n");
+		ret = -EBUSY;
+		spin_unlock_irqrestore(&dev->lock, flags);
+		goto out_free;
+	}
+
+	for (i = 0; i < dev->eps_num; i++) {
+		ep = &dev->eps[i];
+		strscpy(&info->eps[i].name[0], ep->ep->name,
+				USB_RAW_EP_NAME_MAX);
+		info->eps[i].addr = ep->addr;
+		fill_ep_caps(&ep->ep->caps, &info->eps[i].caps);
+		fill_ep_limits(ep->ep, &info->eps[i].limits);
+	}
+	ret = dev->eps_num;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	if (copy_to_user((void __user *)value, info, sizeof(*info)))
+		ret = -EFAULT;
+
+out_free:
+	kfree(info);
+out:
+	return ret;
+}
+
+static long raw_ioctl(struct file *fd, unsigned int cmd, unsigned long value)
+{
+	struct raw_dev *dev = fd->private_data;
+	int ret = 0;
+
+	if (!dev)
+		return -EBUSY;
+
+	switch (cmd) {
+	case USB_RAW_IOCTL_INIT:
+		ret = raw_ioctl_init(dev, value);
+		break;
+	case USB_RAW_IOCTL_RUN:
+		ret = raw_ioctl_run(dev, value);
+		break;
+	case USB_RAW_IOCTL_EVENT_FETCH:
+		ret = raw_ioctl_event_fetch(dev, value);
+		break;
+	case USB_RAW_IOCTL_EP0_WRITE:
+		ret = raw_ioctl_ep0_write(dev, value);
+		break;
+	case USB_RAW_IOCTL_EP0_READ:
+		ret = raw_ioctl_ep0_read(dev, value);
+		break;
+	case USB_RAW_IOCTL_EP_ENABLE:
+		ret = raw_ioctl_ep_enable(dev, value);
+		break;
+	case USB_RAW_IOCTL_EP_DISABLE:
+		ret = raw_ioctl_ep_disable(dev, value);
+		break;
+	case USB_RAW_IOCTL_EP_WRITE:
+		ret = raw_ioctl_ep_write(dev, value);
+		break;
+	case USB_RAW_IOCTL_EP_READ:
+		ret = raw_ioctl_ep_read(dev, value);
+		break;
+	case USB_RAW_IOCTL_CONFIGURE:
+		ret = raw_ioctl_configure(dev, value);
+		break;
+	case USB_RAW_IOCTL_VBUS_DRAW:
+		ret = raw_ioctl_vbus_draw(dev, value);
+		break;
+	case USB_RAW_IOCTL_EPS_INFO:
+		ret = raw_ioctl_eps_info(dev, value);
+		break;
+	case USB_RAW_IOCTL_EP0_STALL:
+		ret = raw_ioctl_ep0_stall(dev, value);
+		break;
+	case USB_RAW_IOCTL_EP_SET_HALT:
+		ret = raw_ioctl_ep_set_clear_halt_wedge(
+					dev, value, true, true);
+		break;
+	case USB_RAW_IOCTL_EP_CLEAR_HALT:
+		ret = raw_ioctl_ep_set_clear_halt_wedge(
+					dev, value, false, true);
+		break;
+	case USB_RAW_IOCTL_EP_SET_WEDGE:
+		ret = raw_ioctl_ep_set_clear_halt_wedge(
+					dev, value, true, false);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+/*----------------------------------------------------------------------*/
+
+static const struct file_operations raw_fops = {
+	.open =			raw_open,
+	.unlocked_ioctl =	raw_ioctl,
+	.compat_ioctl =		raw_ioctl,
+	.release =		raw_release,
+	.llseek =		no_llseek,
+};
+
+static struct miscdevice raw_misc_device = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = DRIVER_NAME,
+	.fops = &raw_fops,
+};
+
+module_misc_device(raw_misc_device);
diff --git a/drivers/usb/gadget/legacy/serial.c b/drivers/usb/gadget/legacy/serial.c
new file mode 100644
index 000000000..dcd3a6603
--- /dev/null
+++ b/drivers/usb/gadget/legacy/serial.c
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * serial.c -- USB gadget serial driver
+ *
+ * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
+ * Copyright (C) 2008 by David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+#include "u_serial.h"
+
+
+/* Defines */
+
+#define GS_VERSION_STR			"v2.4"
+#define GS_VERSION_NUM			0x2400
+
+#define GS_LONG_NAME			"Gadget Serial"
+#define GS_VERSION_NAME			GS_LONG_NAME " " GS_VERSION_STR
+
+/*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
+
+/* Thanks to NetChip Technologies for donating this product ID.
+*
+* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
+* Instead:  allocate your own, using normal USB-IF procedures.
+*/
+#define GS_VENDOR_ID			0x0525	/* NetChip */
+#define GS_PRODUCT_ID			0xa4a6	/* Linux-USB Serial Gadget */
+#define GS_CDC_PRODUCT_ID		0xa4a7	/* ... as CDC-ACM */
+#define GS_CDC_OBEX_PRODUCT_ID		0xa4a9	/* ... as CDC-OBEX */
+
+/* string IDs are assigned dynamically */
+
+#define STRING_DESCRIPTION_IDX		USB_GADGET_FIRST_AVAIL_IDX
+
+static struct usb_string strings_dev[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = GS_VERSION_NAME,
+	[USB_GADGET_SERIAL_IDX].s = "",
+	[STRING_DESCRIPTION_IDX].s = NULL /* updated; f(use_acm) */,
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		USB_DT_DEVICE_SIZE,
+	.bDescriptorType =	USB_DT_DEVICE,
+	/* .bcdUSB = DYNAMIC */
+	/* .bDeviceClass = f(use_acm) */
+	.bDeviceSubClass =	0,
+	.bDeviceProtocol =	0,
+	/* .bMaxPacketSize0 = f(hardware) */
+	.idVendor =		cpu_to_le16(GS_VENDOR_ID),
+	/* .idProduct =	f(use_acm) */
+	.bcdDevice = cpu_to_le16(GS_VERSION_NUM),
+	/* .iManufacturer = DYNAMIC */
+	/* .iProduct = DYNAMIC */
+	.bNumConfigurations =	1,
+};
+
+static const struct usb_descriptor_header *otg_desc[2];
+
+/*-------------------------------------------------------------------------*/
+
+/* Module */
+MODULE_DESCRIPTION(GS_VERSION_NAME);
+MODULE_AUTHOR("Al Borchers");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
+
+static bool use_acm = true;
+module_param(use_acm, bool, 0);
+MODULE_PARM_DESC(use_acm, "Use CDC ACM, default=yes");
+
+static bool use_obex = false;
+module_param(use_obex, bool, 0);
+MODULE_PARM_DESC(use_obex, "Use CDC OBEX, default=no");
+
+static unsigned n_ports = 1;
+module_param(n_ports, uint, 0);
+MODULE_PARM_DESC(n_ports, "number of ports to create, default=1");
+
+static bool enable = true;
+
+static int switch_gserial_enable(bool do_enable);
+
+static int enable_set(const char *s, const struct kernel_param *kp)
+{
+	bool do_enable;
+	int ret;
+
+	if (!s)	/* called for no-arg enable == default */
+		return 0;
+
+	ret = strtobool(s, &do_enable);
+	if (ret || enable == do_enable)
+		return ret;
+
+	ret = switch_gserial_enable(do_enable);
+	if (!ret)
+		enable = do_enable;
+
+	return ret;
+}
+
+static const struct kernel_param_ops enable_ops = {
+	.set = enable_set,
+	.get = param_get_bool,
+};
+
+module_param_cb(enable, &enable_ops, &enable, 0644);
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_configuration serial_config_driver = {
+	/* .label = f(use_acm) */
+	/* .bConfigurationValue = f(use_acm) */
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes	= USB_CONFIG_ATT_SELFPOWER,
+};
+
+static struct usb_function_instance *fi_serial[MAX_U_SERIAL_PORTS];
+static struct usb_function *f_serial[MAX_U_SERIAL_PORTS];
+
+static int serial_register_ports(struct usb_composite_dev *cdev,
+		struct usb_configuration *c, const char *f_name)
+{
+	int i;
+	int ret;
+
+	ret = usb_add_config_only(cdev, c);
+	if (ret)
+		goto out;
+
+	for (i = 0; i < n_ports; i++) {
+
+		fi_serial[i] = usb_get_function_instance(f_name);
+		if (IS_ERR(fi_serial[i])) {
+			ret = PTR_ERR(fi_serial[i]);
+			goto fail;
+		}
+
+		f_serial[i] = usb_get_function(fi_serial[i]);
+		if (IS_ERR(f_serial[i])) {
+			ret = PTR_ERR(f_serial[i]);
+			goto err_get_func;
+		}
+
+		ret = usb_add_function(c, f_serial[i]);
+		if (ret)
+			goto err_add_func;
+	}
+
+	return 0;
+
+err_add_func:
+	usb_put_function(f_serial[i]);
+err_get_func:
+	usb_put_function_instance(fi_serial[i]);
+
+fail:
+	i--;
+	while (i >= 0) {
+		usb_remove_function(c, f_serial[i]);
+		usb_put_function(f_serial[i]);
+		usb_put_function_instance(fi_serial[i]);
+		i--;
+	}
+out:
+	return ret;
+}
+
+static int gs_bind(struct usb_composite_dev *cdev)
+{
+	int			status;
+
+	/* Allocate string descriptor numbers ... note that string
+	 * contents can be overridden by the composite_dev glue.
+	 */
+
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (status < 0)
+		goto fail;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+	status = strings_dev[STRING_DESCRIPTION_IDX].id;
+	serial_config_driver.iConfiguration = status;
+
+	if (gadget_is_otg(cdev->gadget)) {
+		if (!otg_desc[0]) {
+			struct usb_descriptor_header *usb_desc;
+
+			usb_desc = usb_otg_descriptor_alloc(cdev->gadget);
+			if (!usb_desc) {
+				status = -ENOMEM;
+				goto fail;
+			}
+			usb_otg_descriptor_init(cdev->gadget, usb_desc);
+			otg_desc[0] = usb_desc;
+			otg_desc[1] = NULL;
+		}
+		serial_config_driver.descriptors = otg_desc;
+		serial_config_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	/* register our configuration */
+	if (use_acm) {
+		status  = serial_register_ports(cdev, &serial_config_driver,
+				"acm");
+		usb_ep_autoconfig_reset(cdev->gadget);
+	} else if (use_obex)
+		status = serial_register_ports(cdev, &serial_config_driver,
+				"obex");
+	else {
+		status = serial_register_ports(cdev, &serial_config_driver,
+				"gser");
+	}
+	if (status < 0)
+		goto fail1;
+
+	usb_composite_overwrite_options(cdev, &coverwrite);
+	INFO(cdev, "%s\n", GS_VERSION_NAME);
+
+	return 0;
+fail1:
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+fail:
+	return status;
+}
+
+static int gs_unbind(struct usb_composite_dev *cdev)
+{
+	int i;
+
+	for (i = 0; i < n_ports; i++) {
+		usb_put_function(f_serial[i]);
+		usb_put_function_instance(fi_serial[i]);
+	}
+
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+
+	return 0;
+}
+
+static struct usb_composite_driver gserial_driver = {
+	.name		= "g_serial",
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_SUPER,
+	.bind		= gs_bind,
+	.unbind		= gs_unbind,
+};
+
+static int switch_gserial_enable(bool do_enable)
+{
+	if (!serial_config_driver.label)
+		/* gserial_init() was not called, yet */
+		return 0;
+
+	if (do_enable)
+		return usb_composite_probe(&gserial_driver);
+
+	usb_composite_unregister(&gserial_driver);
+	return 0;
+}
+
+static int __init gserial_init(void)
+{
+	/* We *could* export two configs; that'd be much cleaner...
+	 * but neither of these product IDs was defined that way.
+	 */
+	if (use_acm) {
+		serial_config_driver.label = "CDC ACM config";
+		serial_config_driver.bConfigurationValue = 2;
+		device_desc.bDeviceClass = USB_CLASS_COMM;
+		device_desc.idProduct =
+				cpu_to_le16(GS_CDC_PRODUCT_ID);
+	} else if (use_obex) {
+		serial_config_driver.label = "CDC OBEX config";
+		serial_config_driver.bConfigurationValue = 3;
+		device_desc.bDeviceClass = USB_CLASS_COMM;
+		device_desc.idProduct =
+			cpu_to_le16(GS_CDC_OBEX_PRODUCT_ID);
+	} else {
+		serial_config_driver.label = "Generic Serial config";
+		serial_config_driver.bConfigurationValue = 1;
+		device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
+		device_desc.idProduct =
+				cpu_to_le16(GS_PRODUCT_ID);
+	}
+	strings_dev[STRING_DESCRIPTION_IDX].s = serial_config_driver.label;
+
+	if (!enable)
+		return 0;
+
+	return usb_composite_probe(&gserial_driver);
+}
+module_init(gserial_init);
+
+static void __exit gserial_cleanup(void)
+{
+	if (enable)
+		usb_composite_unregister(&gserial_driver);
+}
+module_exit(gserial_cleanup);
diff --git a/drivers/usb/gadget/legacy/tcm_usb_gadget.c b/drivers/usb/gadget/legacy/tcm_usb_gadget.c
new file mode 100644
index 000000000..408702279
--- /dev/null
+++ b/drivers/usb/gadget/legacy/tcm_usb_gadget.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Target based USB-Gadget
+ *
+ * UAS protocol handling, target callbacks, configfs handling,
+ * BBB (USB Mass Storage Class Bulk-Only (BBB) and Transport protocol handling.
+ *
+ * Author: Sebastian Andrzej Siewior <bigeasy at linutronix dot de>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/configfs.h>
+#include <linux/ctype.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/storage.h>
+#include <scsi/scsi_tcq.h>
+#include <target/target_core_base.h>
+#include <target/target_core_fabric.h>
+#include <asm/unaligned.h>
+
+#include "u_tcm.h"
+
+USB_GADGET_COMPOSITE_OPTIONS();
+
+#define UAS_VENDOR_ID	0x0525	/* NetChip */
+#define UAS_PRODUCT_ID	0xa4a5	/* Linux-USB File-backed Storage Gadget */
+
+static struct usb_device_descriptor usbg_device_desc = {
+	.bLength =		sizeof(usbg_device_desc),
+	.bDescriptorType =	USB_DT_DEVICE,
+	/* .bcdUSB = DYNAMIC */
+	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
+	.idVendor =		cpu_to_le16(UAS_VENDOR_ID),
+	.idProduct =		cpu_to_le16(UAS_PRODUCT_ID),
+	.bNumConfigurations =   1,
+};
+
+#define USB_G_STR_CONFIG USB_GADGET_FIRST_AVAIL_IDX
+
+static struct usb_string	usbg_us_strings[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s	= "Target Manufacturer",
+	[USB_GADGET_PRODUCT_IDX].s	= "Target Product",
+	[USB_GADGET_SERIAL_IDX].s	= "000000000001",
+	[USB_G_STR_CONFIG].s		= "default config",
+	{ },
+};
+
+static struct usb_gadget_strings usbg_stringtab = {
+	.language = 0x0409,
+	.strings = usbg_us_strings,
+};
+
+static struct usb_gadget_strings *usbg_strings[] = {
+	&usbg_stringtab,
+	NULL,
+};
+
+static struct usb_function_instance *fi_tcm;
+static struct usb_function *f_tcm;
+
+static int guas_unbind(struct usb_composite_dev *cdev)
+{
+	if (!IS_ERR_OR_NULL(f_tcm))
+		usb_put_function(f_tcm);
+
+	return 0;
+}
+
+static int tcm_do_config(struct usb_configuration *c)
+{
+	int status;
+
+	f_tcm = usb_get_function(fi_tcm);
+	if (IS_ERR(f_tcm))
+		return PTR_ERR(f_tcm);
+
+	status = usb_add_function(c, f_tcm);
+	if (status < 0) {
+		usb_put_function(f_tcm);
+		return status;
+	}
+
+	return 0;
+}
+
+static struct usb_configuration usbg_config_driver = {
+	.label                  = "Linux Target",
+	.bConfigurationValue    = 1,
+	.bmAttributes           = USB_CONFIG_ATT_SELFPOWER,
+};
+
+static int usbg_attach(struct usb_function_instance *f);
+static void usbg_detach(struct usb_function_instance *f);
+
+static int usb_target_bind(struct usb_composite_dev *cdev)
+{
+	int ret;
+
+	ret = usb_string_ids_tab(cdev, usbg_us_strings);
+	if (ret)
+		return ret;
+
+	usbg_device_desc.iManufacturer =
+		usbg_us_strings[USB_GADGET_MANUFACTURER_IDX].id;
+	usbg_device_desc.iProduct = usbg_us_strings[USB_GADGET_PRODUCT_IDX].id;
+	usbg_device_desc.iSerialNumber =
+		usbg_us_strings[USB_GADGET_SERIAL_IDX].id;
+	usbg_config_driver.iConfiguration =
+		usbg_us_strings[USB_G_STR_CONFIG].id;
+
+	ret = usb_add_config(cdev, &usbg_config_driver, tcm_do_config);
+	if (ret)
+		return ret;
+	usb_composite_overwrite_options(cdev, &coverwrite);
+	return 0;
+}
+
+static struct usb_composite_driver usbg_driver = {
+	.name           = "g_target",
+	.dev            = &usbg_device_desc,
+	.strings        = usbg_strings,
+	.max_speed      = USB_SPEED_SUPER,
+	.bind		= usb_target_bind,
+	.unbind         = guas_unbind,
+};
+
+static int usbg_attach(struct usb_function_instance *f)
+{
+	return usb_composite_probe(&usbg_driver);
+}
+
+static void usbg_detach(struct usb_function_instance *f)
+{
+	usb_composite_unregister(&usbg_driver);
+}
+
+static int __init usb_target_gadget_init(void)
+{
+	struct f_tcm_opts *tcm_opts;
+
+	fi_tcm = usb_get_function_instance("tcm");
+	if (IS_ERR(fi_tcm))
+		return PTR_ERR(fi_tcm);
+
+	tcm_opts = container_of(fi_tcm, struct f_tcm_opts, func_inst);
+	mutex_lock(&tcm_opts->dep_lock);
+	tcm_opts->tcm_register_callback = usbg_attach;
+	tcm_opts->tcm_unregister_callback = usbg_detach;
+	tcm_opts->dependent = THIS_MODULE;
+	tcm_opts->can_attach = true;
+	tcm_opts->has_dep = true;
+	mutex_unlock(&tcm_opts->dep_lock);
+
+	fi_tcm->set_inst_name(fi_tcm, "tcm-legacy");
+
+	return 0;
+}
+module_init(usb_target_gadget_init);
+
+static void __exit usb_target_gadget_exit(void)
+{
+	if (!IS_ERR_OR_NULL(fi_tcm))
+		usb_put_function_instance(fi_tcm);
+
+}
+module_exit(usb_target_gadget_exit);
+
+MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>");
+MODULE_DESCRIPTION("usb-gadget fabric");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/gadget/legacy/webcam.c b/drivers/usb/gadget/legacy/webcam.c
new file mode 100644
index 000000000..e9b5846b2
--- /dev/null
+++ b/drivers/usb/gadget/legacy/webcam.c
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *	webcam.c -- USB webcam gadget driver
+ *
+ *	Copyright (C) 2009-2010
+ *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/usb/video.h>
+
+#include "u_uvc.h"
+
+USB_GADGET_COMPOSITE_OPTIONS();
+
+/*-------------------------------------------------------------------------*/
+
+/* module parameters specific to the Video streaming endpoint */
+static unsigned int streaming_interval = 1;
+module_param(streaming_interval, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_interval, "1 - 16");
+
+static unsigned int streaming_maxpacket = 1024;
+module_param(streaming_maxpacket, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_maxpacket, "1 - 1023 (FS), 1 - 3072 (hs/ss)");
+
+static unsigned int streaming_maxburst;
+module_param(streaming_maxburst, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_maxburst, "0 - 15 (ss only)");
+
+/* --------------------------------------------------------------------------
+ * Device descriptor
+ */
+
+#define WEBCAM_VENDOR_ID		0x1d6b	/* Linux Foundation */
+#define WEBCAM_PRODUCT_ID		0x0102	/* Webcam A/V gadget */
+#define WEBCAM_DEVICE_BCD		0x0010	/* 0.10 */
+
+static char webcam_vendor_label[] = "Linux Foundation";
+static char webcam_product_label[] = "Webcam gadget";
+static char webcam_config_label[] = "Video";
+
+/* string IDs are assigned dynamically */
+
+#define STRING_DESCRIPTION_IDX		USB_GADGET_FIRST_AVAIL_IDX
+
+static struct usb_string webcam_strings[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = webcam_vendor_label,
+	[USB_GADGET_PRODUCT_IDX].s = webcam_product_label,
+	[USB_GADGET_SERIAL_IDX].s = "",
+	[STRING_DESCRIPTION_IDX].s = webcam_config_label,
+	{  }
+};
+
+static struct usb_gadget_strings webcam_stringtab = {
+	.language = 0x0409,	/* en-us */
+	.strings = webcam_strings,
+};
+
+static struct usb_gadget_strings *webcam_device_strings[] = {
+	&webcam_stringtab,
+	NULL,
+};
+
+static struct usb_function_instance *fi_uvc;
+static struct usb_function *f_uvc;
+
+static struct usb_device_descriptor webcam_device_descriptor = {
+	.bLength		= USB_DT_DEVICE_SIZE,
+	.bDescriptorType	= USB_DT_DEVICE,
+	/* .bcdUSB = DYNAMIC */
+	.bDeviceClass		= USB_CLASS_MISC,
+	.bDeviceSubClass	= 0x02,
+	.bDeviceProtocol	= 0x01,
+	.bMaxPacketSize0	= 0, /* dynamic */
+	.idVendor		= cpu_to_le16(WEBCAM_VENDOR_ID),
+	.idProduct		= cpu_to_le16(WEBCAM_PRODUCT_ID),
+	.bcdDevice		= cpu_to_le16(WEBCAM_DEVICE_BCD),
+	.iManufacturer		= 0, /* dynamic */
+	.iProduct		= 0, /* dynamic */
+	.iSerialNumber		= 0, /* dynamic */
+	.bNumConfigurations	= 0, /* dynamic */
+};
+
+DECLARE_UVC_HEADER_DESCRIPTOR(1);
+
+static const struct UVC_HEADER_DESCRIPTOR(1) uvc_control_header = {
+	.bLength		= UVC_DT_HEADER_SIZE(1),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_VC_HEADER,
+	.bcdUVC			= cpu_to_le16(0x0110),
+	.wTotalLength		= 0, /* dynamic */
+	.dwClockFrequency	= cpu_to_le32(48000000),
+	.bInCollection		= 0, /* dynamic */
+	.baInterfaceNr[0]	= 0, /* dynamic */
+};
+
+static const struct uvc_camera_terminal_descriptor uvc_camera_terminal = {
+	.bLength		= UVC_DT_CAMERA_TERMINAL_SIZE(3),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_VC_INPUT_TERMINAL,
+	.bTerminalID		= 1,
+	.wTerminalType		= cpu_to_le16(0x0201),
+	.bAssocTerminal		= 0,
+	.iTerminal		= 0,
+	.wObjectiveFocalLengthMin	= cpu_to_le16(0),
+	.wObjectiveFocalLengthMax	= cpu_to_le16(0),
+	.wOcularFocalLength		= cpu_to_le16(0),
+	.bControlSize		= 3,
+	.bmControls[0]		= 2,
+	.bmControls[1]		= 0,
+	.bmControls[2]		= 0,
+};
+
+static const struct uvc_processing_unit_descriptor uvc_processing = {
+	.bLength		= UVC_DT_PROCESSING_UNIT_SIZE(2),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_VC_PROCESSING_UNIT,
+	.bUnitID		= 2,
+	.bSourceID		= 1,
+	.wMaxMultiplier		= cpu_to_le16(16*1024),
+	.bControlSize		= 2,
+	.bmControls[0]		= 1,
+	.bmControls[1]		= 0,
+	.iProcessing		= 0,
+	.bmVideoStandards	= 0,
+};
+
+static const struct uvc_output_terminal_descriptor uvc_output_terminal = {
+	.bLength		= UVC_DT_OUTPUT_TERMINAL_SIZE,
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_VC_OUTPUT_TERMINAL,
+	.bTerminalID		= 3,
+	.wTerminalType		= cpu_to_le16(0x0101),
+	.bAssocTerminal		= 0,
+	.bSourceID		= 2,
+	.iTerminal		= 0,
+};
+
+DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(1, 2);
+
+static const struct UVC_INPUT_HEADER_DESCRIPTOR(1, 2) uvc_input_header = {
+	.bLength		= UVC_DT_INPUT_HEADER_SIZE(1, 2),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_VS_INPUT_HEADER,
+	.bNumFormats		= 2,
+	.wTotalLength		= 0, /* dynamic */
+	.bEndpointAddress	= 0, /* dynamic */
+	.bmInfo			= 0,
+	.bTerminalLink		= 3,
+	.bStillCaptureMethod	= 0,
+	.bTriggerSupport	= 0,
+	.bTriggerUsage		= 0,
+	.bControlSize		= 1,
+	.bmaControls[0][0]	= 0,
+	.bmaControls[1][0]	= 4,
+};
+
+static const struct uvc_format_uncompressed uvc_format_yuv = {
+	.bLength		= UVC_DT_FORMAT_UNCOMPRESSED_SIZE,
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_VS_FORMAT_UNCOMPRESSED,
+	.bFormatIndex		= 1,
+	.bNumFrameDescriptors	= 2,
+	.guidFormat		=
+		{ 'Y',  'U',  'Y',  '2', 0x00, 0x00, 0x10, 0x00,
+		 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71},
+	.bBitsPerPixel		= 16,
+	.bDefaultFrameIndex	= 1,
+	.bAspectRatioX		= 0,
+	.bAspectRatioY		= 0,
+	.bmInterfaceFlags	= 0,
+	.bCopyProtect		= 0,
+};
+
+DECLARE_UVC_FRAME_UNCOMPRESSED(1);
+DECLARE_UVC_FRAME_UNCOMPRESSED(3);
+
+static const struct UVC_FRAME_UNCOMPRESSED(3) uvc_frame_yuv_360p = {
+	.bLength		= UVC_DT_FRAME_UNCOMPRESSED_SIZE(3),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_VS_FRAME_UNCOMPRESSED,
+	.bFrameIndex		= 1,
+	.bmCapabilities		= 0,
+	.wWidth			= cpu_to_le16(640),
+	.wHeight		= cpu_to_le16(360),
+	.dwMinBitRate		= cpu_to_le32(18432000),
+	.dwMaxBitRate		= cpu_to_le32(55296000),
+	.dwMaxVideoFrameBufferSize	= cpu_to_le32(460800),
+	.dwDefaultFrameInterval	= cpu_to_le32(666666),
+	.bFrameIntervalType	= 3,
+	.dwFrameInterval[0]	= cpu_to_le32(666666),
+	.dwFrameInterval[1]	= cpu_to_le32(1000000),
+	.dwFrameInterval[2]	= cpu_to_le32(5000000),
+};
+
+static const struct UVC_FRAME_UNCOMPRESSED(1) uvc_frame_yuv_720p = {
+	.bLength		= UVC_DT_FRAME_UNCOMPRESSED_SIZE(1),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_VS_FRAME_UNCOMPRESSED,
+	.bFrameIndex		= 2,
+	.bmCapabilities		= 0,
+	.wWidth			= cpu_to_le16(1280),
+	.wHeight		= cpu_to_le16(720),
+	.dwMinBitRate		= cpu_to_le32(29491200),
+	.dwMaxBitRate		= cpu_to_le32(29491200),
+	.dwMaxVideoFrameBufferSize	= cpu_to_le32(1843200),
+	.dwDefaultFrameInterval	= cpu_to_le32(5000000),
+	.bFrameIntervalType	= 1,
+	.dwFrameInterval[0]	= cpu_to_le32(5000000),
+};
+
+static const struct uvc_format_mjpeg uvc_format_mjpg = {
+	.bLength		= UVC_DT_FORMAT_MJPEG_SIZE,
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_VS_FORMAT_MJPEG,
+	.bFormatIndex		= 2,
+	.bNumFrameDescriptors	= 2,
+	.bmFlags		= 0,
+	.bDefaultFrameIndex	= 1,
+	.bAspectRatioX		= 0,
+	.bAspectRatioY		= 0,
+	.bmInterfaceFlags	= 0,
+	.bCopyProtect		= 0,
+};
+
+DECLARE_UVC_FRAME_MJPEG(1);
+DECLARE_UVC_FRAME_MJPEG(3);
+
+static const struct UVC_FRAME_MJPEG(3) uvc_frame_mjpg_360p = {
+	.bLength		= UVC_DT_FRAME_MJPEG_SIZE(3),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_VS_FRAME_MJPEG,
+	.bFrameIndex		= 1,
+	.bmCapabilities		= 0,
+	.wWidth			= cpu_to_le16(640),
+	.wHeight		= cpu_to_le16(360),
+	.dwMinBitRate		= cpu_to_le32(18432000),
+	.dwMaxBitRate		= cpu_to_le32(55296000),
+	.dwMaxVideoFrameBufferSize	= cpu_to_le32(460800),
+	.dwDefaultFrameInterval	= cpu_to_le32(666666),
+	.bFrameIntervalType	= 3,
+	.dwFrameInterval[0]	= cpu_to_le32(666666),
+	.dwFrameInterval[1]	= cpu_to_le32(1000000),
+	.dwFrameInterval[2]	= cpu_to_le32(5000000),
+};
+
+static const struct UVC_FRAME_MJPEG(1) uvc_frame_mjpg_720p = {
+	.bLength		= UVC_DT_FRAME_MJPEG_SIZE(1),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_VS_FRAME_MJPEG,
+	.bFrameIndex		= 2,
+	.bmCapabilities		= 0,
+	.wWidth			= cpu_to_le16(1280),
+	.wHeight		= cpu_to_le16(720),
+	.dwMinBitRate		= cpu_to_le32(29491200),
+	.dwMaxBitRate		= cpu_to_le32(29491200),
+	.dwMaxVideoFrameBufferSize	= cpu_to_le32(1843200),
+	.dwDefaultFrameInterval	= cpu_to_le32(5000000),
+	.bFrameIntervalType	= 1,
+	.dwFrameInterval[0]	= cpu_to_le32(5000000),
+};
+
+static const struct uvc_color_matching_descriptor uvc_color_matching = {
+	.bLength		= UVC_DT_COLOR_MATCHING_SIZE,
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_VS_COLORFORMAT,
+	.bColorPrimaries	= 1,
+	.bTransferCharacteristics	= 1,
+	.bMatrixCoefficients	= 4,
+};
+
+static const struct uvc_descriptor_header * const uvc_fs_control_cls[] = {
+	(const struct uvc_descriptor_header *) &uvc_control_header,
+	(const struct uvc_descriptor_header *) &uvc_camera_terminal,
+	(const struct uvc_descriptor_header *) &uvc_processing,
+	(const struct uvc_descriptor_header *) &uvc_output_terminal,
+	NULL,
+};
+
+static const struct uvc_descriptor_header * const uvc_ss_control_cls[] = {
+	(const struct uvc_descriptor_header *) &uvc_control_header,
+	(const struct uvc_descriptor_header *) &uvc_camera_terminal,
+	(const struct uvc_descriptor_header *) &uvc_processing,
+	(const struct uvc_descriptor_header *) &uvc_output_terminal,
+	NULL,
+};
+
+static const struct uvc_descriptor_header * const uvc_fs_streaming_cls[] = {
+	(const struct uvc_descriptor_header *) &uvc_input_header,
+	(const struct uvc_descriptor_header *) &uvc_format_yuv,
+	(const struct uvc_descriptor_header *) &uvc_frame_yuv_360p,
+	(const struct uvc_descriptor_header *) &uvc_frame_yuv_720p,
+	(const struct uvc_descriptor_header *) &uvc_color_matching,
+	(const struct uvc_descriptor_header *) &uvc_format_mjpg,
+	(const struct uvc_descriptor_header *) &uvc_frame_mjpg_360p,
+	(const struct uvc_descriptor_header *) &uvc_frame_mjpg_720p,
+	(const struct uvc_descriptor_header *) &uvc_color_matching,
+	NULL,
+};
+
+static const struct uvc_descriptor_header * const uvc_hs_streaming_cls[] = {
+	(const struct uvc_descriptor_header *) &uvc_input_header,
+	(const struct uvc_descriptor_header *) &uvc_format_yuv,
+	(const struct uvc_descriptor_header *) &uvc_frame_yuv_360p,
+	(const struct uvc_descriptor_header *) &uvc_frame_yuv_720p,
+	(const struct uvc_descriptor_header *) &uvc_color_matching,
+	(const struct uvc_descriptor_header *) &uvc_format_mjpg,
+	(const struct uvc_descriptor_header *) &uvc_frame_mjpg_360p,
+	(const struct uvc_descriptor_header *) &uvc_frame_mjpg_720p,
+	(const struct uvc_descriptor_header *) &uvc_color_matching,
+	NULL,
+};
+
+static const struct uvc_descriptor_header * const uvc_ss_streaming_cls[] = {
+	(const struct uvc_descriptor_header *) &uvc_input_header,
+	(const struct uvc_descriptor_header *) &uvc_format_yuv,
+	(const struct uvc_descriptor_header *) &uvc_frame_yuv_360p,
+	(const struct uvc_descriptor_header *) &uvc_frame_yuv_720p,
+	(const struct uvc_descriptor_header *) &uvc_color_matching,
+	(const struct uvc_descriptor_header *) &uvc_format_mjpg,
+	(const struct uvc_descriptor_header *) &uvc_frame_mjpg_360p,
+	(const struct uvc_descriptor_header *) &uvc_frame_mjpg_720p,
+	(const struct uvc_descriptor_header *) &uvc_color_matching,
+	NULL,
+};
+
+/* --------------------------------------------------------------------------
+ * USB configuration
+ */
+
+static int
+webcam_config_bind(struct usb_configuration *c)
+{
+	int status = 0;
+
+	f_uvc = usb_get_function(fi_uvc);
+	if (IS_ERR(f_uvc))
+		return PTR_ERR(f_uvc);
+
+	status = usb_add_function(c, f_uvc);
+	if (status < 0)
+		usb_put_function(f_uvc);
+
+	return status;
+}
+
+static struct usb_configuration webcam_config_driver = {
+	.label			= webcam_config_label,
+	.bConfigurationValue	= 1,
+	.iConfiguration		= 0, /* dynamic */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+	.MaxPower		= CONFIG_USB_GADGET_VBUS_DRAW,
+};
+
+static int
+webcam_unbind(struct usb_composite_dev *cdev)
+{
+	if (!IS_ERR_OR_NULL(f_uvc))
+		usb_put_function(f_uvc);
+	if (!IS_ERR_OR_NULL(fi_uvc))
+		usb_put_function_instance(fi_uvc);
+	return 0;
+}
+
+static int
+webcam_bind(struct usb_composite_dev *cdev)
+{
+	struct f_uvc_opts *uvc_opts;
+	int ret;
+
+	fi_uvc = usb_get_function_instance("uvc");
+	if (IS_ERR(fi_uvc))
+		return PTR_ERR(fi_uvc);
+
+	uvc_opts = container_of(fi_uvc, struct f_uvc_opts, func_inst);
+
+	uvc_opts->streaming_interval = streaming_interval;
+	uvc_opts->streaming_maxpacket = streaming_maxpacket;
+	uvc_opts->streaming_maxburst = streaming_maxburst;
+
+	uvc_opts->fs_control = uvc_fs_control_cls;
+	uvc_opts->ss_control = uvc_ss_control_cls;
+	uvc_opts->fs_streaming = uvc_fs_streaming_cls;
+	uvc_opts->hs_streaming = uvc_hs_streaming_cls;
+	uvc_opts->ss_streaming = uvc_ss_streaming_cls;
+
+	/* Allocate string descriptor numbers ... note that string contents
+	 * can be overridden by the composite_dev glue.
+	 */
+	ret = usb_string_ids_tab(cdev, webcam_strings);
+	if (ret < 0)
+		goto error;
+	webcam_device_descriptor.iManufacturer =
+		webcam_strings[USB_GADGET_MANUFACTURER_IDX].id;
+	webcam_device_descriptor.iProduct =
+		webcam_strings[USB_GADGET_PRODUCT_IDX].id;
+	webcam_config_driver.iConfiguration =
+		webcam_strings[STRING_DESCRIPTION_IDX].id;
+
+	/* Register our configuration. */
+	if ((ret = usb_add_config(cdev, &webcam_config_driver,
+					webcam_config_bind)) < 0)
+		goto error;
+
+	usb_composite_overwrite_options(cdev, &coverwrite);
+	INFO(cdev, "Webcam Video Gadget\n");
+	return 0;
+
+error:
+	usb_put_function_instance(fi_uvc);
+	return ret;
+}
+
+/* --------------------------------------------------------------------------
+ * Driver
+ */
+
+static struct usb_composite_driver webcam_driver = {
+	.name		= "g_webcam",
+	.dev		= &webcam_device_descriptor,
+	.strings	= webcam_device_strings,
+	.max_speed	= USB_SPEED_SUPER,
+	.bind		= webcam_bind,
+	.unbind		= webcam_unbind,
+};
+
+module_usb_composite_driver(webcam_driver);
+
+MODULE_AUTHOR("Laurent Pinchart");
+MODULE_DESCRIPTION("Webcam Video Gadget");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/usb/gadget/legacy/zero.c b/drivers/usb/gadget/legacy/zero.c
new file mode 100644
index 000000000..23312a07e
--- /dev/null
+++ b/drivers/usb/gadget/legacy/zero.c
@@ -0,0 +1,428 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * zero.c -- Gadget Zero, for USB development
+ *
+ * Copyright (C) 2003-2008 David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ */
+
+/*
+ * Gadget Zero only needs two bulk endpoints, and is an example of how you
+ * can write a hardware-agnostic gadget driver running inside a USB device.
+ * Some hardware details are visible, but don't affect most of the driver.
+ *
+ * Use it with the Linux host side "usbtest" driver to get a basic functional
+ * test of your device-side usb stack, or with "usb-skeleton".
+ *
+ * It supports two similar configurations.  One sinks whatever the usb host
+ * writes, and in return sources zeroes.  The other loops whatever the host
+ * writes back, so the host can read it.
+ *
+ * Many drivers will only have one configuration, letting them be much
+ * simpler if they also don't support high speed operation (like this
+ * driver does).
+ *
+ * Why is *this* driver using two configurations, rather than setting up
+ * two interfaces with different functions?  To help verify that multiple
+ * configuration infrastructure is working correctly; also, so that it can
+ * work with low capability USB controllers without four bulk endpoints.
+ */
+
+/*
+ * driver assumes self-powered hardware, and
+ * has no way for users to trigger remote wakeup.
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/usb/composite.h>
+
+#include "g_zero.h"
+/*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
+
+#define DRIVER_VERSION		"Cinco de Mayo 2008"
+
+static const char longname[] = "Gadget Zero";
+
+/*
+ * Normally the "loopback" configuration is second (index 1) so
+ * it's not the default.  Here's where to change that order, to
+ * work better with hosts where config changes are problematic or
+ * controllers (like original superh) that only support one config.
+ */
+static bool loopdefault = 0;
+module_param(loopdefault, bool, S_IRUGO|S_IWUSR);
+
+static struct usb_zero_options gzero_options = {
+	.isoc_interval = GZERO_ISOC_INTERVAL,
+	.isoc_maxpacket = GZERO_ISOC_MAXPACKET,
+	.bulk_buflen = GZERO_BULK_BUFLEN,
+	.qlen = GZERO_QLEN,
+	.ss_bulk_qlen = GZERO_SS_BULK_QLEN,
+	.ss_iso_qlen = GZERO_SS_ISO_QLEN,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Thanks to NetChip Technologies for donating this product ID.
+ *
+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
+#ifndef	CONFIG_USB_ZERO_HNPTEST
+#define DRIVER_VENDOR_NUM	0x0525		/* NetChip */
+#define DRIVER_PRODUCT_NUM	0xa4a0		/* Linux-USB "Gadget Zero" */
+#define DEFAULT_AUTORESUME	0
+#else
+#define DRIVER_VENDOR_NUM	0x1a0a		/* OTG test device IDs */
+#define DRIVER_PRODUCT_NUM	0xbadd
+#define DEFAULT_AUTORESUME	5
+#endif
+
+/* If the optional "autoresume" mode is enabled, it provides good
+ * functional coverage for the "USBCV" test harness from USB-IF.
+ * It's always set if OTG mode is enabled.
+ */
+static unsigned autoresume = DEFAULT_AUTORESUME;
+module_param(autoresume, uint, S_IRUGO);
+MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup");
+
+/* Maximum Autoresume time */
+static unsigned max_autoresume;
+module_param(max_autoresume, uint, S_IRUGO);
+MODULE_PARM_DESC(max_autoresume, "maximum seconds before remote wakeup");
+
+/* Interval between two remote wakeups */
+static unsigned autoresume_interval_ms;
+module_param(autoresume_interval_ms, uint, S_IRUGO);
+MODULE_PARM_DESC(autoresume_interval_ms,
+		"milliseconds to increase successive wakeup delays");
+
+static unsigned autoresume_step_ms;
+/*-------------------------------------------------------------------------*/
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	/* .bcdUSB = DYNAMIC */
+	.bDeviceClass =		USB_CLASS_VENDOR_SPEC,
+
+	.idVendor =		cpu_to_le16(DRIVER_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(DRIVER_PRODUCT_NUM),
+	.bNumConfigurations =	2,
+};
+
+static const struct usb_descriptor_header *otg_desc[2];
+
+/* string IDs are assigned dynamically */
+/* default serial number takes at least two packets */
+static char serial[] = "0123456789.0123456789.0123456789";
+
+#define USB_GZERO_SS_DESC	(USB_GADGET_FIRST_AVAIL_IDX + 0)
+#define USB_GZERO_LB_DESC	(USB_GADGET_FIRST_AVAIL_IDX + 1)
+
+static struct usb_string strings_dev[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = longname,
+	[USB_GADGET_SERIAL_IDX].s = serial,
+	[USB_GZERO_SS_DESC].s	= "source and sink data",
+	[USB_GZERO_LB_DESC].s	= "loop input to output",
+	{  }			/* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static struct timer_list	autoresume_timer;
+static struct usb_composite_dev *autoresume_cdev;
+
+static void zero_autoresume(struct timer_list *unused)
+{
+	struct usb_composite_dev	*cdev = autoresume_cdev;
+	struct usb_gadget		*g = cdev->gadget;
+
+	/* unconfigured devices can't issue wakeups */
+	if (!cdev->config)
+		return;
+
+	/* Normally the host would be woken up for something
+	 * more significant than just a timer firing; likely
+	 * because of some direct user request.
+	 */
+	if (g->speed != USB_SPEED_UNKNOWN) {
+		int status = usb_gadget_wakeup(g);
+		INFO(cdev, "%s --> %d\n", __func__, status);
+	}
+}
+
+static void zero_suspend(struct usb_composite_dev *cdev)
+{
+	if (cdev->gadget->speed == USB_SPEED_UNKNOWN)
+		return;
+
+	if (autoresume) {
+		if (max_autoresume &&
+			(autoresume_step_ms > max_autoresume * 1000))
+				autoresume_step_ms = autoresume * 1000;
+
+		mod_timer(&autoresume_timer, jiffies +
+			msecs_to_jiffies(autoresume_step_ms));
+		DBG(cdev, "suspend, wakeup in %d milliseconds\n",
+			autoresume_step_ms);
+
+		autoresume_step_ms += autoresume_interval_ms;
+	} else
+		DBG(cdev, "%s\n", __func__);
+}
+
+static void zero_resume(struct usb_composite_dev *cdev)
+{
+	DBG(cdev, "%s\n", __func__);
+	del_timer(&autoresume_timer);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_configuration loopback_driver = {
+	.label          = "loopback",
+	.bConfigurationValue = 2,
+	.bmAttributes   = USB_CONFIG_ATT_SELFPOWER,
+	/* .iConfiguration = DYNAMIC */
+};
+
+static struct usb_function *func_ss;
+static struct usb_function_instance *func_inst_ss;
+
+static int ss_config_setup(struct usb_configuration *c,
+		const struct usb_ctrlrequest *ctrl)
+{
+	switch (ctrl->bRequest) {
+	case 0x5b:
+	case 0x5c:
+		return func_ss->setup(func_ss, ctrl);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static struct usb_configuration sourcesink_driver = {
+	.label                  = "source/sink",
+	.setup                  = ss_config_setup,
+	.bConfigurationValue    = 3,
+	.bmAttributes           = USB_CONFIG_ATT_SELFPOWER,
+	/* .iConfiguration      = DYNAMIC */
+};
+
+module_param_named(buflen, gzero_options.bulk_buflen, uint, 0);
+module_param_named(pattern, gzero_options.pattern, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63, 2 = none");
+
+module_param_named(isoc_interval, gzero_options.isoc_interval, uint,
+		S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(isoc_interval, "1 - 16");
+
+module_param_named(isoc_maxpacket, gzero_options.isoc_maxpacket, uint,
+		S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(isoc_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)");
+
+module_param_named(isoc_mult, gzero_options.isoc_mult, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(isoc_mult, "0 - 2 (hs/ss only)");
+
+module_param_named(isoc_maxburst, gzero_options.isoc_maxburst, uint,
+		S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(isoc_maxburst, "0 - 15 (ss only)");
+
+static struct usb_function *func_lb;
+static struct usb_function_instance *func_inst_lb;
+
+module_param_named(qlen, gzero_options.qlen, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(qlen, "depth of loopback queue");
+
+module_param_named(ss_bulk_qlen, gzero_options.ss_bulk_qlen, uint,
+		S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(bulk_qlen, "depth of sourcesink queue for bulk transfer");
+
+module_param_named(ss_iso_qlen, gzero_options.ss_iso_qlen, uint,
+		S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(iso_qlen, "depth of sourcesink queue for iso transfer");
+
+static int zero_bind(struct usb_composite_dev *cdev)
+{
+	struct f_ss_opts	*ss_opts;
+	struct f_lb_opts	*lb_opts;
+	int			status;
+
+	/* Allocate string descriptor numbers ... note that string
+	 * contents can be overridden by the composite_dev glue.
+	 */
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (status < 0)
+		return status;
+
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+	device_desc.iSerialNumber = strings_dev[USB_GADGET_SERIAL_IDX].id;
+
+	autoresume_cdev = cdev;
+	timer_setup(&autoresume_timer, zero_autoresume, 0);
+
+	func_inst_ss = usb_get_function_instance("SourceSink");
+	if (IS_ERR(func_inst_ss))
+		return PTR_ERR(func_inst_ss);
+
+	ss_opts =  container_of(func_inst_ss, struct f_ss_opts, func_inst);
+	ss_opts->pattern = gzero_options.pattern;
+	ss_opts->isoc_interval = gzero_options.isoc_interval;
+	ss_opts->isoc_maxpacket = gzero_options.isoc_maxpacket;
+	ss_opts->isoc_mult = gzero_options.isoc_mult;
+	ss_opts->isoc_maxburst = gzero_options.isoc_maxburst;
+	ss_opts->bulk_buflen = gzero_options.bulk_buflen;
+	ss_opts->bulk_qlen = gzero_options.ss_bulk_qlen;
+	ss_opts->iso_qlen = gzero_options.ss_iso_qlen;
+
+	func_ss = usb_get_function(func_inst_ss);
+	if (IS_ERR(func_ss)) {
+		status = PTR_ERR(func_ss);
+		goto err_put_func_inst_ss;
+	}
+
+	func_inst_lb = usb_get_function_instance("Loopback");
+	if (IS_ERR(func_inst_lb)) {
+		status = PTR_ERR(func_inst_lb);
+		goto err_put_func_ss;
+	}
+
+	lb_opts = container_of(func_inst_lb, struct f_lb_opts, func_inst);
+	lb_opts->bulk_buflen = gzero_options.bulk_buflen;
+	lb_opts->qlen = gzero_options.qlen;
+
+	func_lb = usb_get_function(func_inst_lb);
+	if (IS_ERR(func_lb)) {
+		status = PTR_ERR(func_lb);
+		goto err_put_func_inst_lb;
+	}
+
+	sourcesink_driver.iConfiguration = strings_dev[USB_GZERO_SS_DESC].id;
+	loopback_driver.iConfiguration = strings_dev[USB_GZERO_LB_DESC].id;
+
+	/* support autoresume for remote wakeup testing */
+	sourcesink_driver.bmAttributes &= ~USB_CONFIG_ATT_WAKEUP;
+	loopback_driver.bmAttributes &= ~USB_CONFIG_ATT_WAKEUP;
+	sourcesink_driver.descriptors = NULL;
+	loopback_driver.descriptors = NULL;
+	if (autoresume) {
+		sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+		loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+		autoresume_step_ms = autoresume * 1000;
+	}
+
+	/* support OTG systems */
+	if (gadget_is_otg(cdev->gadget)) {
+		if (!otg_desc[0]) {
+			struct usb_descriptor_header *usb_desc;
+
+			usb_desc = usb_otg_descriptor_alloc(cdev->gadget);
+			if (!usb_desc) {
+				status = -ENOMEM;
+				goto err_conf_flb;
+			}
+			usb_otg_descriptor_init(cdev->gadget, usb_desc);
+			otg_desc[0] = usb_desc;
+			otg_desc[1] = NULL;
+		}
+		sourcesink_driver.descriptors = otg_desc;
+		sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+		loopback_driver.descriptors = otg_desc;
+		loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	/* Register primary, then secondary configuration.  Note that
+	 * SH3 only allows one config...
+	 */
+	if (loopdefault) {
+		usb_add_config_only(cdev, &loopback_driver);
+		usb_add_config_only(cdev, &sourcesink_driver);
+	} else {
+		usb_add_config_only(cdev, &sourcesink_driver);
+		usb_add_config_only(cdev, &loopback_driver);
+	}
+	status = usb_add_function(&sourcesink_driver, func_ss);
+	if (status)
+		goto err_free_otg_desc;
+
+	usb_ep_autoconfig_reset(cdev->gadget);
+	status = usb_add_function(&loopback_driver, func_lb);
+	if (status)
+		goto err_free_otg_desc;
+
+	usb_ep_autoconfig_reset(cdev->gadget);
+	usb_composite_overwrite_options(cdev, &coverwrite);
+
+	INFO(cdev, "%s, version: " DRIVER_VERSION "\n", longname);
+
+	return 0;
+
+err_free_otg_desc:
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+err_conf_flb:
+	usb_put_function(func_lb);
+	func_lb = NULL;
+err_put_func_inst_lb:
+	usb_put_function_instance(func_inst_lb);
+	func_inst_lb = NULL;
+err_put_func_ss:
+	usb_put_function(func_ss);
+	func_ss = NULL;
+err_put_func_inst_ss:
+	usb_put_function_instance(func_inst_ss);
+	func_inst_ss = NULL;
+	return status;
+}
+
+static int zero_unbind(struct usb_composite_dev *cdev)
+{
+	del_timer_sync(&autoresume_timer);
+	if (!IS_ERR_OR_NULL(func_ss))
+		usb_put_function(func_ss);
+	usb_put_function_instance(func_inst_ss);
+	if (!IS_ERR_OR_NULL(func_lb))
+		usb_put_function(func_lb);
+	usb_put_function_instance(func_inst_lb);
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+
+	return 0;
+}
+
+static struct usb_composite_driver zero_driver = {
+	.name		= "zero",
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_SUPER,
+	.bind		= zero_bind,
+	.unbind		= zero_unbind,
+	.suspend	= zero_suspend,
+	.resume		= zero_resume,
+};
+
+module_usb_composite_driver(zero_driver);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/u_f.c b/drivers/usb/gadget/u_f.c
new file mode 100644
index 000000000..6aea1ecb3
--- /dev/null
+++ b/drivers/usb/gadget/u_f.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * u_f.c -- USB function utilities for Gadget stack
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#include "u_f.h"
+#include <linux/usb/ch9.h>
+
+struct usb_request *alloc_ep_req(struct usb_ep *ep, size_t len)
+{
+	struct usb_request      *req;
+
+	req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+	if (req) {
+		req->length = usb_endpoint_dir_out(ep->desc) ?
+			usb_ep_align(ep, len) : len;
+		req->buf = kmalloc(req->length, GFP_ATOMIC);
+		if (!req->buf) {
+			usb_ep_free_request(ep, req);
+			req = NULL;
+		}
+	}
+	return req;
+}
+EXPORT_SYMBOL_GPL(alloc_ep_req);
diff --git a/drivers/usb/gadget/u_f.h b/drivers/usb/gadget/u_f.h
new file mode 100644
index 000000000..e313c3b8d
--- /dev/null
+++ b/drivers/usb/gadget/u_f.h
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * u_f.h
+ *
+ * Utility definitions for USB functions
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#ifndef __U_F_H__
+#define __U_F_H__
+
+#include <linux/usb/gadget.h>
+#include <linux/overflow.h>
+
+/* Variable Length Array Macros **********************************************/
+#define vla_group(groupname) size_t groupname##__next = 0
+#define vla_group_size(groupname) groupname##__next
+
+#define vla_item(groupname, type, name, n) \
+	size_t groupname##_##name##__offset = ({			       \
+		size_t offset = 0;					       \
+		if (groupname##__next != SIZE_MAX) {			       \
+			size_t align_mask = __alignof__(type) - 1;	       \
+			size_t size = array_size(n, sizeof(type));	       \
+			offset = (groupname##__next + align_mask) &	       \
+				  ~align_mask;				       \
+			if (check_add_overflow(offset, size,		       \
+					       &groupname##__next)) {          \
+				groupname##__next = SIZE_MAX;		       \
+				offset = 0;				       \
+			}						       \
+		}							       \
+		offset;							       \
+	})
+
+#define vla_item_with_sz(groupname, type, name, n) \
+	size_t groupname##_##name##__sz = array_size(n, sizeof(type));	        \
+	size_t groupname##_##name##__offset = ({			        \
+		size_t offset = 0;						\
+		if (groupname##__next != SIZE_MAX) {				\
+			size_t align_mask = __alignof__(type) - 1;		\
+			offset = (groupname##__next + align_mask) &		\
+				  ~align_mask;					\
+			if (check_add_overflow(offset, groupname##_##name##__sz,\
+							&groupname##__next)) {	\
+				groupname##__next = SIZE_MAX;			\
+				offset = 0;					\
+			}							\
+		}								\
+		offset;								\
+	})
+
+#define vla_ptr(ptr, groupname, name) \
+	((void *) ((char *)ptr + groupname##_##name##__offset))
+
+struct usb_ep;
+struct usb_request;
+
+/**
+ * alloc_ep_req - returns a usb_request allocated by the gadget driver and
+ * allocates the request's buffer.
+ *
+ * @ep: the endpoint to allocate a usb_request
+ * @len: usb_requests's buffer suggested size
+ *
+ * In case @ep direction is OUT, the @len will be aligned to ep's
+ * wMaxPacketSize. In order to avoid memory leaks or drops, *always* use
+ * usb_requests's length (req->length) to refer to the allocated buffer size.
+ * Requests allocated via alloc_ep_req() *must* be freed by free_ep_req().
+ */
+struct usb_request *alloc_ep_req(struct usb_ep *ep, size_t len);
+
+/* Frees a usb_request previously allocated by alloc_ep_req() */
+static inline void free_ep_req(struct usb_ep *ep, struct usb_request *req)
+{
+	WARN_ON(req->buf == NULL);
+	kfree(req->buf);
+	req->buf = NULL;
+	usb_ep_free_request(ep, req);
+}
+
+#endif /* __U_F_H__ */
diff --git a/drivers/usb/gadget/u_os_desc.h b/drivers/usb/gadget/u_os_desc.h
new file mode 100644
index 000000000..5d7d35c8c
--- /dev/null
+++ b/drivers/usb/gadget/u_os_desc.h
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * u_os_desc.h
+ *
+ * Utility definitions for "OS Descriptors" support
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+ */
+
+#ifndef __U_OS_DESC_H__
+#define __U_OS_DESC_H__
+
+#include <asm/unaligned.h>
+#include <linux/nls.h>
+
+#define USB_EXT_PROP_DW_SIZE			0
+#define USB_EXT_PROP_DW_PROPERTY_DATA_TYPE	4
+#define USB_EXT_PROP_W_PROPERTY_NAME_LENGTH	8
+#define USB_EXT_PROP_B_PROPERTY_NAME		10
+#define USB_EXT_PROP_DW_PROPERTY_DATA_LENGTH	10
+#define USB_EXT_PROP_B_PROPERTY_DATA		14
+
+#define USB_EXT_PROP_RESERVED			0
+#define USB_EXT_PROP_UNICODE			1
+#define USB_EXT_PROP_UNICODE_ENV		2
+#define USB_EXT_PROP_BINARY			3
+#define USB_EXT_PROP_LE32			4
+#define USB_EXT_PROP_BE32			5
+#define USB_EXT_PROP_UNICODE_LINK		6
+#define USB_EXT_PROP_UNICODE_MULTI		7
+
+static inline u8 *__usb_ext_prop_ptr(u8 *buf, size_t offset)
+{
+	return buf + offset;
+}
+
+static inline u8 *usb_ext_prop_size_ptr(u8 *buf)
+{
+	return __usb_ext_prop_ptr(buf, USB_EXT_PROP_DW_SIZE);
+}
+
+static inline u8 *usb_ext_prop_type_ptr(u8 *buf)
+{
+	return __usb_ext_prop_ptr(buf, USB_EXT_PROP_DW_PROPERTY_DATA_TYPE);
+}
+
+static inline u8 *usb_ext_prop_name_len_ptr(u8 *buf)
+{
+	return __usb_ext_prop_ptr(buf, USB_EXT_PROP_W_PROPERTY_NAME_LENGTH);
+}
+
+static inline u8 *usb_ext_prop_name_ptr(u8 *buf)
+{
+	return __usb_ext_prop_ptr(buf, USB_EXT_PROP_B_PROPERTY_NAME);
+}
+
+static inline u8 *usb_ext_prop_data_len_ptr(u8 *buf, size_t off)
+{
+	return __usb_ext_prop_ptr(buf,
+				  USB_EXT_PROP_DW_PROPERTY_DATA_LENGTH + off);
+}
+
+static inline u8 *usb_ext_prop_data_ptr(u8 *buf, size_t off)
+{
+	return __usb_ext_prop_ptr(buf, USB_EXT_PROP_B_PROPERTY_DATA + off);
+}
+
+static inline void usb_ext_prop_put_size(u8 *buf, int dw_size)
+{
+	put_unaligned_le32(dw_size, usb_ext_prop_size_ptr(buf));
+}
+
+static inline void usb_ext_prop_put_type(u8 *buf, int type)
+{
+	put_unaligned_le32(type, usb_ext_prop_type_ptr(buf));
+}
+
+static inline int usb_ext_prop_put_name(u8 *buf, const char *name, int pnl)
+{
+	int result;
+
+	put_unaligned_le16(pnl, usb_ext_prop_name_len_ptr(buf));
+	result = utf8s_to_utf16s(name, strlen(name), UTF16_LITTLE_ENDIAN,
+		(wchar_t *) usb_ext_prop_name_ptr(buf), pnl - 2);
+	if (result < 0)
+		return result;
+
+	put_unaligned_le16(0, &buf[USB_EXT_PROP_B_PROPERTY_NAME + pnl - 2]);
+
+	return pnl;
+}
+
+static inline void usb_ext_prop_put_binary(u8 *buf, int pnl, const u8 *data,
+					   int data_len)
+{
+	put_unaligned_le32(data_len, usb_ext_prop_data_len_ptr(buf, pnl));
+	memcpy(usb_ext_prop_data_ptr(buf, pnl), data, data_len);
+}
+
+static inline int usb_ext_prop_put_unicode(u8 *buf, int pnl, const char *string,
+					   int data_len)
+{
+	int result;
+	put_unaligned_le32(data_len, usb_ext_prop_data_len_ptr(buf, pnl));
+	result = utf8s_to_utf16s(string, data_len >> 1, UTF16_LITTLE_ENDIAN,
+			(wchar_t *) usb_ext_prop_data_ptr(buf, pnl),
+			data_len - 2);
+	if (result < 0)
+		return result;
+
+	put_unaligned_le16(0,
+		&buf[USB_EXT_PROP_B_PROPERTY_DATA + pnl + data_len - 2]);
+
+	return data_len;
+}
+
+#endif /* __U_OS_DESC_H__ */
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
new file mode 100644
index 000000000..5756acb07
--- /dev/null
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -0,0 +1,510 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Gadget support on a system involves
+#    (a) a peripheral controller, and
+#    (b) the gadget driver using it.
+#
+# NOTE:  Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
+#
+#  - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
+#  - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
+#  - Some systems have both kinds of controllers.
+#
+# With help from a special transceiver and a "Mini-AB" jack, systems with
+# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
+#
+
+#
+# USB Peripheral Controller Support
+#
+# The order here is alphabetical, except that integrated controllers go
+# before discrete ones so they will be the initial/default value:
+#   - integrated/SOC controllers first
+#   - licensed IP used in both SOC and discrete versions
+#   - discrete ones (including all PCI-only controllers)
+#   - debug/dummy gadget+hcd is last.
+#
+menu "USB Peripheral Controller"
+
+#
+# Integrated controllers
+#
+
+config USB_AT91
+	tristate "Atmel AT91 USB Device Port"
+	depends on ARCH_AT91
+	depends on OF || COMPILE_TEST
+	help
+	   Many Atmel AT91 processors (such as the AT91RM2000) have a
+	   full speed USB Device Port with support for five configurable
+	   endpoints (plus endpoint zero).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "at91_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_LPC32XX
+	tristate "LPC32XX USB Peripheral Controller"
+	depends on ARCH_LPC32XX || COMPILE_TEST
+	depends on I2C
+	select USB_ISP1301
+	help
+	   This option selects the USB device controller in the LPC32xx SoC.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "lpc32xx_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_ATMEL_USBA
+	tristate "Atmel USBA"
+	depends on ARCH_AT91
+	help
+	  USBA is the integrated high-speed USB Device controller on some
+	  AT91SAM9 and AT91CAP9 processors from Atmel.
+
+	  The fifo_mode parameter is used to select endpoint allocation mode.
+	  fifo_mode = 0 is used to let the driver autoconfigure the endpoints.
+	  In this case, for ep1 2 banks are allocated if it works in isochronous
+	  mode and only 1 bank otherwise. For the rest of the endpoints
+	  only 1 bank is allocated.
+
+	  fifo_mode = 1 is a generic maximum fifo size (1024 bytes) configuration
+	  allowing the usage of ep1 - ep6
+
+	  fifo_mode = 2 is a generic performance maximum fifo size (1024 bytes)
+	  configuration allowing the usage of ep1 - ep3
+
+	  fifo_mode = 3 is a balanced performance configuration allowing the
+	  the usage of ep1 - ep8
+
+config USB_BCM63XX_UDC
+	tristate "Broadcom BCM63xx Peripheral Controller"
+	depends on BCM63XX
+	help
+	   Many Broadcom BCM63xx chipsets (such as the BCM6328) have a
+	   high speed USB Device Port with support for four fixed endpoints
+	   (plus endpoint zero).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "bcm63xx_udc".
+
+config USB_FSL_USB2
+	tristate "Freescale Highspeed USB DR Peripheral Controller"
+	depends on FSL_SOC
+	help
+	   Some of Freescale PowerPC and i.MX processors have a High Speed
+	   Dual-Role(DR) USB controller, which supports device mode.
+
+	   The number of programmable endpoints is different through
+	   SOC revisions.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "fsl_usb2_udc" and force
+	   all gadget drivers to also be dynamically linked.
+
+config USB_FUSB300
+	tristate "Faraday FUSB300 USB Peripheral Controller"
+	depends on !PHYS_ADDR_T_64BIT && HAS_DMA
+	help
+	   Faraday usb device controller FUSB300 driver
+
+config USB_FOTG210_UDC
+	depends on HAS_DMA
+	tristate "Faraday FOTG210 USB Peripheral Controller"
+	help
+	   Faraday USB2.0 OTG controller which can be configured as
+	   high speed or full speed USB device. This driver supppors
+	   Bulk Transfer so far.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "fotg210_udc".
+
+config USB_GR_UDC
+	tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
+	depends on HAS_DMA
+	help
+	  Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
+	  VHDL IP core library.
+
+config USB_OMAP
+	tristate "OMAP USB Device Controller"
+	depends on ARCH_OMAP1
+	depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
+	help
+	   Many Texas Instruments OMAP processors have flexible full
+	   speed USB device controllers, with support for up to 30
+	   endpoints (plus endpoint zero).  This driver supports the
+	   controller in the OMAP 1611, and should work with controllers
+	   in other OMAP processors too, given minor tweaks.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "omap_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_PXA25X
+	tristate "PXA 25x or IXP 4xx"
+	depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
+	depends on HAS_IOMEM
+	help
+	   Intel's PXA 25x series XScale ARM-5TE processors include
+	   an integrated full speed USB 1.1 device controller.  The
+	   controller in the IXP 4xx series is register-compatible.
+
+	   It has fifteen fixed-function endpoints, as well as endpoint
+	   zero (for control transfers).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "pxa25x_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+# if there's only one gadget driver, using only two bulk endpoints,
+# don't waste memory for the other endpoints
+config USB_PXA25X_SMALL
+	depends on USB_PXA25X
+	bool
+	default n if USB_ETH_RNDIS
+	default y if USB_ZERO
+	default y if USB_ETH
+	default y if USB_G_SERIAL
+
+config USB_R8A66597
+	tristate "Renesas R8A66597 USB Peripheral Controller"
+	depends on HAS_DMA
+	help
+	   R8A66597 is a discrete USB host and peripheral controller chip that
+	   supports both full and high speed USB 2.0 data transfers.
+	   It has nine configurable endpoints, and endpoint zero.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "r8a66597_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_RENESAS_USBHS_UDC
+	tristate 'Renesas USBHS controller'
+	depends on USB_RENESAS_USBHS
+	help
+	   Renesas USBHS is a discrete USB host and peripheral controller chip
+	   that supports both full and high speed USB 2.0 data transfers.
+	   It has nine or more configurable endpoints, and endpoint zero.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "renesas_usbhs" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_RENESAS_USB3
+	tristate 'Renesas USB3.0 Peripheral controller'
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on EXTCON
+	select USB_ROLE_SWITCH
+	help
+	   Renesas USB3.0 Peripheral controller is a USB peripheral controller
+	   that supports super, high, and full speed USB 3.0 data transfers.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "renesas_usb3" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_PXA27X
+	tristate "PXA 27x"
+	depends on HAS_IOMEM
+	help
+	   Intel's PXA 27x series XScale ARM v5TE processors include
+	   an integrated full speed USB 1.1 device controller.
+
+	   It has up to 23 endpoints, as well as endpoint zero (for
+	   control transfers).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "pxa27x_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_S3C2410
+	tristate "S3C2410 USB Device Controller"
+	depends on ARCH_S3C24XX
+	help
+	  Samsung's S3C2410 is an ARM-4 processor with an integrated
+	  full speed USB 1.1 device controller.  It has 4 configurable
+	  endpoints, as well as endpoint zero (for control transfers).
+
+	  This driver has been tested on the S3C2410, S3C2412, and
+	  S3C2440 processors.
+
+config USB_S3C2410_DEBUG
+	bool "S3C2410 udc debug messages"
+	depends on USB_S3C2410
+
+config USB_S3C_HSUDC
+	tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
+	depends on ARCH_S3C24XX
+	help
+	  Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
+	  integrated with dual speed USB 2.0 device controller. It has
+	  8 endpoints, as well as endpoint zero.
+
+	  This driver has been tested on S3C2416 and S3C2450 processors.
+
+config USB_MV_UDC
+	tristate "Marvell USB2.0 Device Controller"
+	depends on HAS_DMA
+	help
+	  Marvell Socs (including PXA and MMP series) include a high speed
+	  USB2.0 OTG controller, which can be configured as high speed or
+	  full speed USB peripheral.
+
+config USB_MV_U3D
+	depends on HAS_DMA
+	tristate "MARVELL PXA2128 USB 3.0 controller"
+	help
+	  MARVELL PXA2128 Processor series include a super speed USB3.0 device
+	  controller, which support super speed USB peripheral.
+
+config USB_SNP_CORE
+	depends on (USB_AMD5536UDC || USB_SNP_UDC_PLAT)
+	depends on HAS_DMA
+	tristate
+	help
+	  This enables core driver support for Synopsys USB 2.0 Device
+	  controller.
+
+	  This will be enabled when PCI or Platform driver for this UDC is
+	  selected. Currently, this will be enabled by USB_SNP_UDC_PLAT or
+	  USB_AMD5536UDC options.
+
+	  This IP is different to the High Speed OTG IP that can be enabled
+	  by selecting USB_DWC2 or USB_DWC3 options.
+
+config USB_SNP_UDC_PLAT
+	tristate "Synopsys USB 2.0 Device controller"
+	depends on USB_GADGET && OF && HAS_DMA
+	depends on EXTCON || EXTCON=n
+	select USB_SNP_CORE
+	default ARCH_BCM_IPROC
+	help
+	  This adds Platform Device support for Synopsys Designware core
+	  AHB subsystem USB2.0 Device Controller (UDC).
+
+	  This driver works with UDCs integrated into Broadcom's Northstar2
+	  and Cygnus SoCs.
+
+	  If unsure, say N.
+#
+# Controllers available in both integrated and discrete versions
+#
+
+config USB_M66592
+	tristate "Renesas M66592 USB Peripheral Controller"
+	depends on HAS_IOMEM
+	help
+	   M66592 is a discrete USB peripheral controller chip that
+	   supports both full and high speed USB 2.0 data transfers.
+	   It has seven configurable endpoints, and endpoint zero.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "m66592_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+source "drivers/usb/gadget/udc/bdc/Kconfig"
+
+#
+# Controllers available only in discrete form (and all PCI controllers)
+#
+
+config USB_AMD5536UDC
+	tristate "AMD5536 UDC"
+	depends on USB_PCI && HAS_DMA
+	select USB_SNP_CORE
+	help
+	   The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
+	   It is a USB Highspeed DMA capable USB device controller. Beside ep0
+	   it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
+	   The UDC port supports OTG operation, and may be used as a host port
+	   if it's not being used to implement peripheral or OTG roles.
+
+	   This UDC is based on Synopsys USB device controller IP and selects
+	   CONFIG_USB_SNP_CORE option to build the core driver.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "amd5536udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_FSL_QE
+	tristate "Freescale QE/CPM USB Device Controller"
+	depends on FSL_SOC && (QUICC_ENGINE || CPM)
+	depends on !64BIT || BROKEN
+	help
+	   Some of Freescale PowerPC processors have a Full Speed
+	   QE/CPM2 USB controller, which support device mode with 4
+	   programmable endpoints. This driver supports the
+	   controller in the MPC8360 and MPC8272, and should work with
+	   controllers having QE or CPM2, given minor tweaks.
+
+	   Set CONFIG_USB_GADGET to "m" to build this driver as a
+	   dynamically linked module called "fsl_qe_udc".
+
+config USB_NET2272
+	depends on HAS_IOMEM
+	tristate "PLX NET2272"
+	help
+	  PLX NET2272 is a USB peripheral controller which supports
+	  both full and high speed USB 2.0 data transfers.
+
+	  It has three configurable endpoints, as well as endpoint zero
+	  (for control transfer).
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "net2272" and force all
+	  gadget drivers to also be dynamically linked.
+
+config USB_NET2272_DMA
+	bool "Support external DMA controller"
+	depends on USB_NET2272 && HAS_DMA
+	help
+	  The NET2272 part can optionally support an external DMA
+	  controller, but your board has to have support in the
+	  driver itself.
+
+	  If unsure, say "N" here.  The driver works fine in PIO mode.
+
+config USB_NET2280
+	tristate "NetChip NET228x / PLX USB3x8x"
+	depends on USB_PCI
+	help
+	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which
+	   supports both full and high speed USB 2.0 data transfers.
+
+	   It has six configurable endpoints, as well as endpoint zero
+	   (for control transfers) and several endpoints with dedicated
+	   functions.
+
+	   PLX 2380 is a PCIe version of the PLX 2380.
+
+	   PLX 3380 / 3382 is a PCIe based USB peripheral controller which
+	   supports full, high speed USB 2.0 and super speed USB 3.0
+	   data transfers.
+
+	   It has eight configurable endpoints, as well as endpoint zero
+	   (for control transfers) and several endpoints with dedicated
+	   functions.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "net2280" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_GOKU
+	tristate "Toshiba TC86C001 'Goku-S'"
+	depends on USB_PCI
+	help
+	   The Toshiba TC86C001 is a PCI device which includes controllers
+	   for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
+
+	   The device controller has three configurable (bulk or interrupt)
+	   endpoints, plus endpoint zero (for control transfers).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "goku_udc" and to force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_EG20T
+	tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
+	depends on USB_PCI
+	help
+	  This is a USB device driver for EG20T PCH.
+	  EG20T PCH is the platform controller hub that is used in Intel's
+	  general embedded platform. EG20T PCH has USB device interface.
+	  Using this interface, it is able to access system devices connected
+	  to USB device.
+	  This driver enables USB device function.
+	  USB device is a USB peripheral controller which
+	  supports both full and high speed USB 2.0 data transfers.
+	  This driver supports both control transfer and bulk transfer modes.
+	  This driver dose not support interrupt transfer or isochronous
+	  transfer modes.
+
+	  This driver also can be used for LAPIS Semiconductor's ML7213 which is
+	  for IVI(In-Vehicle Infotainment) use.
+	  ML7831 is for general purpose use.
+	  ML7213/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7831 is completely compatible for Intel EG20T PCH.
+
+	  This driver can be used with Intel's Quark X1000 SOC platform
+
+config USB_GADGET_XILINX
+	tristate "Xilinx USB Driver"
+	depends on HAS_DMA
+	depends on OF || COMPILE_TEST
+	help
+	  USB peripheral controller driver for Xilinx USB2 device.
+	  Xilinx USB2 device is a soft IP which supports both full
+	  and high speed USB 2.0 data transfers. It has seven configurable
+	  endpoints(bulk or interrupt or isochronous), as well as
+	  endpoint zero(for control transfers).
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "udc-xilinx" and force all
+	  gadget drivers to also be dynamically linked.
+
+config USB_MAX3420_UDC
+	tristate "MAX3420 (USB-over-SPI) support"
+	depends on SPI
+	help
+	  The Maxim MAX3420 chip supports USB2.0 full-speed peripheral mode.
+	  The MAX3420 is run by SPI interface, and hence the dependency.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called max3420_udc
+
+config USB_TEGRA_XUDC
+	tristate "NVIDIA Tegra Superspeed USB 3.0 Device Controller"
+	depends on ARCH_TEGRA || COMPILE_TEST
+	depends on PHY_TEGRA_XUSB
+	help
+	 Enables NVIDIA Tegra USB 3.0 device mode controller driver.
+
+	 Say "y" to link the driver statically, or "m" to build a
+	 dynamically linked module called "tegra_xudc" and force all
+	 gadget drivers to also be dynamically linked.
+
+config USB_ASPEED_UDC
+	tristate "Aspeed UDC driver support"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	depends on USB_LIBCOMPOSITE
+	help
+	  Enables Aspeed USB2.0 Device Controller driver for AST260x
+	  family SoCs. The controller supports 1 control endpoint and
+	  4 programmable endpoints.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "aspeed_udc" and force all
+	  gadget drivers to also be dynamically linked.
+
+source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig"
+
+#
+# LAST -- dummy/emulated controller
+#
+
+config USB_DUMMY_HCD
+	tristate "Dummy HCD (DEVELOPMENT)"
+	depends on USB=y || (USB=m && USB_GADGET=m)
+	help
+	  This host controller driver emulates USB, looping all data transfer
+	  requests back to a USB "gadget driver" in the same host.  The host
+	  side is the controller; the gadget side is the device.  Gadget drivers
+	  can be high, full, or low speed; and they have access to endpoints
+	  like those from NET2280, PXA2xx, or SA1100 hardware.
+
+	  This may help in some stages of creating a driver to embed in a
+	  Linux device, since it lets you debug several parts of the gadget
+	  driver without its hardware or drivers being involved.
+
+	  Since such a gadget side driver needs to interoperate with a host
+	  side Linux-USB device driver, this may help to debug both sides
+	  of a USB protocol stack.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "dummy_hcd" and force all
+	  gadget drivers to also be dynamically linked.
+
+# NOTE:  Please keep dummy_hcd LAST so that "real hardware" appears
+# first and will be selected by default.
+
+endmenu
diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
new file mode 100644
index 000000000..12f9e4c9e
--- /dev/null
+++ b/drivers/usb/gadget/udc/Makefile
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+# define_trace.h needs to know how to find our header
+CFLAGS_trace.o			:= -I$(src)
+
+udc-core-y			:= core.o trace.o
+
+#
+# USB peripheral controller drivers
+#
+obj-$(CONFIG_USB_GADGET)	+= udc-core.o
+obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
+obj-$(CONFIG_USB_NET2272)	+= net2272.o
+obj-$(CONFIG_USB_NET2280)	+= net2280.o
+obj-$(CONFIG_USB_SNP_CORE)	+= snps_udc_core.o
+obj-$(CONFIG_USB_AMD5536UDC)	+= amd5536udc_pci.o
+obj-$(CONFIG_USB_PXA25X)	+= pxa25x_udc.o
+obj-$(CONFIG_USB_PXA27X)	+= pxa27x_udc.o
+obj-$(CONFIG_USB_GOKU)		+= goku_udc.o
+obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
+obj-$(CONFIG_USB_S3C2410)	+= s3c2410_udc.o
+obj-$(CONFIG_USB_AT91)		+= at91_udc.o
+obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
+obj-$(CONFIG_USB_BCM63XX_UDC)	+= bcm63xx_udc.o
+obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
+fsl_usb2_udc-y			:= fsl_udc_core.o
+obj-$(CONFIG_USB_TEGRA_XUDC)	+= tegra-xudc.o
+obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
+obj-$(CONFIG_USB_R8A66597)	+= r8a66597-udc.o
+obj-$(CONFIG_USB_RENESAS_USB3)	+= renesas_usb3.o
+obj-$(CONFIG_USB_FSL_QE)	+= fsl_qe_udc.o
+obj-$(CONFIG_USB_S3C_HSUDC)	+= s3c-hsudc.o
+obj-$(CONFIG_USB_LPC32XX)	+= lpc32xx_udc.o
+obj-$(CONFIG_USB_EG20T)		+= pch_udc.o
+obj-$(CONFIG_USB_MV_UDC)	+= mv_udc.o
+mv_udc-y			:= mv_udc_core.o
+obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
+obj-$(CONFIG_USB_FOTG210_UDC)	+= fotg210-udc.o
+obj-$(CONFIG_USB_MV_U3D)	+= mv_u3d_core.o
+obj-$(CONFIG_USB_GR_UDC)	+= gr_udc.o
+obj-$(CONFIG_USB_GADGET_XILINX)	+= udc-xilinx.o
+obj-$(CONFIG_USB_SNP_UDC_PLAT) += snps_udc_plat.o
+obj-$(CONFIG_USB_ASPEED_VHUB)	+= aspeed-vhub/
+obj-$(CONFIG_USB_ASPEED_UDC)	+= aspeed_udc.o
+obj-$(CONFIG_USB_BDC_UDC)	+= bdc/
+obj-$(CONFIG_USB_MAX3420_UDC)	+= max3420_udc.o
diff --git a/drivers/usb/gadget/udc/amd5536udc.h b/drivers/usb/gadget/udc/amd5536udc.h
new file mode 100644
index 000000000..055436016
--- /dev/null
+++ b/drivers/usb/gadget/udc/amd5536udc.h
@@ -0,0 +1,661 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * amd5536.h -- header for AMD 5536 UDC high/full speed USB device controller
+ *
+ * Copyright (C) 2007 AMD (https://www.amd.com)
+ * Author: Thomas Dahlmann
+ */
+
+#ifndef AMD5536UDC_H
+#define AMD5536UDC_H
+
+/* debug control */
+/* #define UDC_VERBOSE */
+
+#include <linux/extcon.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* various constants */
+#define UDC_RDE_TIMER_SECONDS		1
+#define UDC_RDE_TIMER_DIV		10
+#define UDC_POLLSTALL_TIMER_USECONDS	500
+
+/* Hs AMD5536 chip rev. */
+#define UDC_HSA0_REV 1
+#define UDC_HSB1_REV 2
+
+/* Broadcom chip rev. */
+#define UDC_BCM_REV 10
+
+/*
+ * SETUP usb commands
+ * needed, because some SETUP's are handled in hw, but must be passed to
+ * gadget driver above
+ * SET_CONFIG
+ */
+#define UDC_SETCONFIG_DWORD0			0x00000900
+#define UDC_SETCONFIG_DWORD0_VALUE_MASK		0xffff0000
+#define UDC_SETCONFIG_DWORD0_VALUE_OFS		16
+
+#define UDC_SETCONFIG_DWORD1			0x00000000
+
+/* SET_INTERFACE */
+#define UDC_SETINTF_DWORD0			0x00000b00
+#define UDC_SETINTF_DWORD0_ALT_MASK		0xffff0000
+#define UDC_SETINTF_DWORD0_ALT_OFS		16
+
+#define UDC_SETINTF_DWORD1			0x00000000
+#define UDC_SETINTF_DWORD1_INTF_MASK		0x0000ffff
+#define UDC_SETINTF_DWORD1_INTF_OFS		0
+
+/* Mass storage reset */
+#define UDC_MSCRES_DWORD0			0x0000ff21
+#define UDC_MSCRES_DWORD1			0x00000000
+
+/* Global CSR's -------------------------------------------------------------*/
+#define UDC_CSR_ADDR				0x500
+
+/* EP NE bits */
+/* EP number */
+#define UDC_CSR_NE_NUM_MASK			0x0000000f
+#define UDC_CSR_NE_NUM_OFS			0
+/* EP direction */
+#define UDC_CSR_NE_DIR_MASK			0x00000010
+#define UDC_CSR_NE_DIR_OFS			4
+/* EP type */
+#define UDC_CSR_NE_TYPE_MASK			0x00000060
+#define UDC_CSR_NE_TYPE_OFS			5
+/* EP config number */
+#define UDC_CSR_NE_CFG_MASK			0x00000780
+#define UDC_CSR_NE_CFG_OFS			7
+/* EP interface number */
+#define UDC_CSR_NE_INTF_MASK			0x00007800
+#define UDC_CSR_NE_INTF_OFS			11
+/* EP alt setting */
+#define UDC_CSR_NE_ALT_MASK			0x00078000
+#define UDC_CSR_NE_ALT_OFS			15
+
+/* max pkt */
+#define UDC_CSR_NE_MAX_PKT_MASK			0x3ff80000
+#define UDC_CSR_NE_MAX_PKT_OFS			19
+
+/* Device Config Register ---------------------------------------------------*/
+#define UDC_DEVCFG_ADDR				0x400
+
+#define UDC_DEVCFG_SOFTRESET			31
+#define UDC_DEVCFG_HNPSFEN			30
+#define UDC_DEVCFG_DMARST			29
+#define UDC_DEVCFG_SET_DESC			18
+#define UDC_DEVCFG_CSR_PRG			17
+#define UDC_DEVCFG_STATUS			7
+#define UDC_DEVCFG_DIR				6
+#define UDC_DEVCFG_PI				5
+#define UDC_DEVCFG_SS				4
+#define UDC_DEVCFG_SP				3
+#define UDC_DEVCFG_RWKP				2
+
+#define UDC_DEVCFG_SPD_MASK			0x3
+#define UDC_DEVCFG_SPD_OFS			0
+#define UDC_DEVCFG_SPD_HS			0x0
+#define UDC_DEVCFG_SPD_FS			0x1
+#define UDC_DEVCFG_SPD_LS			0x2
+/*#define UDC_DEVCFG_SPD_FS			0x3*/
+
+
+/* Device Control Register --------------------------------------------------*/
+#define UDC_DEVCTL_ADDR				0x404
+
+#define UDC_DEVCTL_THLEN_MASK			0xff000000
+#define UDC_DEVCTL_THLEN_OFS			24
+
+#define UDC_DEVCTL_BRLEN_MASK			0x00ff0000
+#define UDC_DEVCTL_BRLEN_OFS			16
+
+#define UDC_DEVCTL_SRX_FLUSH			14
+#define UDC_DEVCTL_CSR_DONE			13
+#define UDC_DEVCTL_DEVNAK			12
+#define UDC_DEVCTL_SD				10
+#define UDC_DEVCTL_MODE				9
+#define UDC_DEVCTL_BREN				8
+#define UDC_DEVCTL_THE				7
+#define UDC_DEVCTL_BF				6
+#define UDC_DEVCTL_BE				5
+#define UDC_DEVCTL_DU				4
+#define UDC_DEVCTL_TDE				3
+#define UDC_DEVCTL_RDE				2
+#define UDC_DEVCTL_RES				0
+
+
+/* Device Status Register ---------------------------------------------------*/
+#define UDC_DEVSTS_ADDR				0x408
+
+#define UDC_DEVSTS_TS_MASK			0xfffc0000
+#define UDC_DEVSTS_TS_OFS			18
+
+#define UDC_DEVSTS_SESSVLD			17
+#define UDC_DEVSTS_PHY_ERROR			16
+#define UDC_DEVSTS_RXFIFO_EMPTY			15
+
+#define UDC_DEVSTS_ENUM_SPEED_MASK		0x00006000
+#define UDC_DEVSTS_ENUM_SPEED_OFS		13
+#define UDC_DEVSTS_ENUM_SPEED_FULL		1
+#define UDC_DEVSTS_ENUM_SPEED_HIGH		0
+
+#define UDC_DEVSTS_SUSP				12
+
+#define UDC_DEVSTS_ALT_MASK			0x00000f00
+#define UDC_DEVSTS_ALT_OFS			8
+
+#define UDC_DEVSTS_INTF_MASK			0x000000f0
+#define UDC_DEVSTS_INTF_OFS			4
+
+#define UDC_DEVSTS_CFG_MASK			0x0000000f
+#define UDC_DEVSTS_CFG_OFS			0
+
+
+/* Device Interrupt Register ------------------------------------------------*/
+#define UDC_DEVINT_ADDR				0x40c
+
+#define UDC_DEVINT_SVC				7
+#define UDC_DEVINT_ENUM				6
+#define UDC_DEVINT_SOF				5
+#define UDC_DEVINT_US				4
+#define UDC_DEVINT_UR				3
+#define UDC_DEVINT_ES				2
+#define UDC_DEVINT_SI				1
+#define UDC_DEVINT_SC				0
+
+/* Device Interrupt Mask Register -------------------------------------------*/
+#define UDC_DEVINT_MSK_ADDR			0x410
+
+#define UDC_DEVINT_MSK				0x7f
+
+/* Endpoint Interrupt Register ----------------------------------------------*/
+#define UDC_EPINT_ADDR				0x414
+
+#define UDC_EPINT_OUT_MASK			0xffff0000
+#define UDC_EPINT_OUT_OFS			16
+#define UDC_EPINT_IN_MASK			0x0000ffff
+#define UDC_EPINT_IN_OFS			0
+
+#define UDC_EPINT_IN_EP0			0
+#define UDC_EPINT_IN_EP1			1
+#define UDC_EPINT_IN_EP2			2
+#define UDC_EPINT_IN_EP3			3
+#define UDC_EPINT_OUT_EP0			16
+#define UDC_EPINT_OUT_EP1			17
+#define UDC_EPINT_OUT_EP2			18
+#define UDC_EPINT_OUT_EP3			19
+
+#define UDC_EPINT_EP0_ENABLE_MSK		0x001e001e
+
+/* Endpoint Interrupt Mask Register -----------------------------------------*/
+#define UDC_EPINT_MSK_ADDR			0x418
+
+#define UDC_EPINT_OUT_MSK_MASK			0xffff0000
+#define UDC_EPINT_OUT_MSK_OFS			16
+#define UDC_EPINT_IN_MSK_MASK			0x0000ffff
+#define UDC_EPINT_IN_MSK_OFS			0
+
+#define UDC_EPINT_MSK_DISABLE_ALL		0xffffffff
+/* mask non-EP0 endpoints */
+#define UDC_EPDATAINT_MSK_DISABLE		0xfffefffe
+/* mask all dev interrupts */
+#define UDC_DEV_MSK_DISABLE			0x7f
+
+/* Endpoint-specific CSR's --------------------------------------------------*/
+#define UDC_EPREGS_ADDR				0x0
+#define UDC_EPIN_REGS_ADDR			0x0
+#define UDC_EPOUT_REGS_ADDR			0x200
+
+#define UDC_EPCTL_ADDR				0x0
+
+#define UDC_EPCTL_RRDY				9
+#define UDC_EPCTL_CNAK				8
+#define UDC_EPCTL_SNAK				7
+#define UDC_EPCTL_NAK				6
+
+#define UDC_EPCTL_ET_MASK			0x00000030
+#define UDC_EPCTL_ET_OFS			4
+#define UDC_EPCTL_ET_CONTROL			0
+#define UDC_EPCTL_ET_ISO			1
+#define UDC_EPCTL_ET_BULK			2
+#define UDC_EPCTL_ET_INTERRUPT			3
+
+#define UDC_EPCTL_P				3
+#define UDC_EPCTL_SN				2
+#define UDC_EPCTL_F				1
+#define UDC_EPCTL_S				0
+
+/* Endpoint Status Registers ------------------------------------------------*/
+#define UDC_EPSTS_ADDR				0x4
+
+#define UDC_EPSTS_RX_PKT_SIZE_MASK		0x007ff800
+#define UDC_EPSTS_RX_PKT_SIZE_OFS		11
+
+#define UDC_EPSTS_TDC				10
+#define UDC_EPSTS_HE				9
+#define UDC_EPSTS_BNA				7
+#define UDC_EPSTS_IN				6
+
+#define UDC_EPSTS_OUT_MASK			0x00000030
+#define UDC_EPSTS_OUT_OFS			4
+#define UDC_EPSTS_OUT_DATA			1
+#define UDC_EPSTS_OUT_DATA_CLEAR		0x10
+#define UDC_EPSTS_OUT_SETUP			2
+#define UDC_EPSTS_OUT_SETUP_CLEAR		0x20
+#define UDC_EPSTS_OUT_CLEAR			0x30
+
+/* Endpoint Buffer Size IN/ Receive Packet Frame Number OUT Registers ------*/
+#define UDC_EPIN_BUFF_SIZE_ADDR			0x8
+#define UDC_EPOUT_FRAME_NUMBER_ADDR		0x8
+
+#define UDC_EPIN_BUFF_SIZE_MASK			0x0000ffff
+#define UDC_EPIN_BUFF_SIZE_OFS			0
+/* EP0in txfifo = 128 bytes*/
+#define UDC_EPIN0_BUFF_SIZE			32
+/* EP0in fullspeed txfifo = 128 bytes*/
+#define UDC_FS_EPIN0_BUFF_SIZE			32
+
+/* fifo size mult = fifo size / max packet */
+#define UDC_EPIN_BUFF_SIZE_MULT			2
+
+/* EPin data fifo size = 1024 bytes DOUBLE BUFFERING */
+#define UDC_EPIN_BUFF_SIZE			256
+/* EPin small INT data fifo size = 128 bytes */
+#define UDC_EPIN_SMALLINT_BUFF_SIZE		32
+
+/* EPin fullspeed data fifo size = 128 bytes DOUBLE BUFFERING */
+#define UDC_FS_EPIN_BUFF_SIZE			32
+
+#define UDC_EPOUT_FRAME_NUMBER_MASK		0x0000ffff
+#define UDC_EPOUT_FRAME_NUMBER_OFS		0
+
+/* Endpoint Buffer Size OUT/Max Packet Size Registers -----------------------*/
+#define UDC_EPOUT_BUFF_SIZE_ADDR		0x0c
+#define UDC_EP_MAX_PKT_SIZE_ADDR		0x0c
+
+#define UDC_EPOUT_BUFF_SIZE_MASK		0xffff0000
+#define UDC_EPOUT_BUFF_SIZE_OFS			16
+#define UDC_EP_MAX_PKT_SIZE_MASK		0x0000ffff
+#define UDC_EP_MAX_PKT_SIZE_OFS			0
+/* EP0in max packet size = 64 bytes */
+#define UDC_EP0IN_MAX_PKT_SIZE			64
+/* EP0out max packet size = 64 bytes */
+#define UDC_EP0OUT_MAX_PKT_SIZE			64
+/* EP0in fullspeed max packet size = 64 bytes */
+#define UDC_FS_EP0IN_MAX_PKT_SIZE		64
+/* EP0out fullspeed max packet size = 64 bytes */
+#define UDC_FS_EP0OUT_MAX_PKT_SIZE		64
+
+/*
+ * Endpoint dma descriptors ------------------------------------------------
+ *
+ * Setup data, Status dword
+ */
+#define UDC_DMA_STP_STS_CFG_MASK		0x0fff0000
+#define UDC_DMA_STP_STS_CFG_OFS			16
+#define UDC_DMA_STP_STS_CFG_ALT_MASK		0x000f0000
+#define UDC_DMA_STP_STS_CFG_ALT_OFS		16
+#define UDC_DMA_STP_STS_CFG_INTF_MASK		0x00f00000
+#define UDC_DMA_STP_STS_CFG_INTF_OFS		20
+#define UDC_DMA_STP_STS_CFG_NUM_MASK		0x0f000000
+#define UDC_DMA_STP_STS_CFG_NUM_OFS		24
+#define UDC_DMA_STP_STS_RX_MASK			0x30000000
+#define UDC_DMA_STP_STS_RX_OFS			28
+#define UDC_DMA_STP_STS_BS_MASK			0xc0000000
+#define UDC_DMA_STP_STS_BS_OFS			30
+#define UDC_DMA_STP_STS_BS_HOST_READY		0
+#define UDC_DMA_STP_STS_BS_DMA_BUSY		1
+#define UDC_DMA_STP_STS_BS_DMA_DONE		2
+#define UDC_DMA_STP_STS_BS_HOST_BUSY		3
+/* IN data, Status dword */
+#define UDC_DMA_IN_STS_TXBYTES_MASK		0x0000ffff
+#define UDC_DMA_IN_STS_TXBYTES_OFS		0
+#define	UDC_DMA_IN_STS_FRAMENUM_MASK		0x07ff0000
+#define UDC_DMA_IN_STS_FRAMENUM_OFS		0
+#define UDC_DMA_IN_STS_L			27
+#define UDC_DMA_IN_STS_TX_MASK			0x30000000
+#define UDC_DMA_IN_STS_TX_OFS			28
+#define UDC_DMA_IN_STS_BS_MASK			0xc0000000
+#define UDC_DMA_IN_STS_BS_OFS			30
+#define UDC_DMA_IN_STS_BS_HOST_READY		0
+#define UDC_DMA_IN_STS_BS_DMA_BUSY		1
+#define UDC_DMA_IN_STS_BS_DMA_DONE		2
+#define UDC_DMA_IN_STS_BS_HOST_BUSY		3
+/* OUT data, Status dword */
+#define UDC_DMA_OUT_STS_RXBYTES_MASK		0x0000ffff
+#define UDC_DMA_OUT_STS_RXBYTES_OFS		0
+#define UDC_DMA_OUT_STS_FRAMENUM_MASK		0x07ff0000
+#define UDC_DMA_OUT_STS_FRAMENUM_OFS		0
+#define UDC_DMA_OUT_STS_L			27
+#define UDC_DMA_OUT_STS_RX_MASK			0x30000000
+#define UDC_DMA_OUT_STS_RX_OFS			28
+#define UDC_DMA_OUT_STS_BS_MASK			0xc0000000
+#define UDC_DMA_OUT_STS_BS_OFS			30
+#define UDC_DMA_OUT_STS_BS_HOST_READY		0
+#define UDC_DMA_OUT_STS_BS_DMA_BUSY		1
+#define UDC_DMA_OUT_STS_BS_DMA_DONE		2
+#define UDC_DMA_OUT_STS_BS_HOST_BUSY		3
+/* max ep0in packet */
+#define UDC_EP0IN_MAXPACKET			1000
+/* max dma packet */
+#define UDC_DMA_MAXPACKET			65536
+
+/* un-usable DMA address */
+#define DMA_DONT_USE				(~(dma_addr_t) 0 )
+
+/* other Endpoint register addresses and values-----------------------------*/
+#define UDC_EP_SUBPTR_ADDR			0x10
+#define UDC_EP_DESPTR_ADDR			0x14
+#define UDC_EP_WRITE_CONFIRM_ADDR		0x1c
+
+/* EP number as layouted in AHB space */
+#define UDC_EP_NUM				32
+#define UDC_EPIN_NUM				16
+#define UDC_EPIN_NUM_USED			5
+#define UDC_EPOUT_NUM				16
+/* EP number of EP's really used = EP0 + 8 data EP's */
+#define UDC_USED_EP_NUM				9
+/* UDC CSR regs are aligned but AHB regs not - offset for OUT EP's */
+#define UDC_CSR_EP_OUT_IX_OFS			12
+
+#define UDC_EP0OUT_IX				16
+#define UDC_EP0IN_IX				0
+
+/* Rx fifo address and size = 1k -------------------------------------------*/
+#define UDC_RXFIFO_ADDR				0x800
+#define UDC_RXFIFO_SIZE				0x400
+
+/* Tx fifo address and size = 1.5k -----------------------------------------*/
+#define UDC_TXFIFO_ADDR				0xc00
+#define UDC_TXFIFO_SIZE				0x600
+
+/* default data endpoints --------------------------------------------------*/
+#define UDC_EPIN_STATUS_IX			1
+#define UDC_EPIN_IX				2
+#define UDC_EPOUT_IX				18
+
+/* general constants -------------------------------------------------------*/
+#define UDC_DWORD_BYTES				4
+#define UDC_BITS_PER_BYTE_SHIFT			3
+#define UDC_BYTE_MASK				0xff
+#define UDC_BITS_PER_BYTE			8
+
+/*---------------------------------------------------------------------------*/
+/* UDC CSR's */
+struct udc_csrs {
+
+	/* sca - setup command address */
+	u32 sca;
+
+	/* ep ne's */
+	u32 ne[UDC_USED_EP_NUM];
+} __attribute__ ((packed));
+
+/* AHB subsystem CSR registers */
+struct udc_regs {
+
+	/* device configuration */
+	u32 cfg;
+
+	/* device control */
+	u32 ctl;
+
+	/* device status */
+	u32 sts;
+
+	/* device interrupt */
+	u32 irqsts;
+
+	/* device interrupt mask */
+	u32 irqmsk;
+
+	/* endpoint interrupt */
+	u32 ep_irqsts;
+
+	/* endpoint interrupt mask */
+	u32 ep_irqmsk;
+} __attribute__ ((packed));
+
+/* endpoint specific registers */
+struct udc_ep_regs {
+
+	/* endpoint control */
+	u32 ctl;
+
+	/* endpoint status */
+	u32 sts;
+
+	/* endpoint buffer size in/ receive packet frame number out */
+	u32 bufin_framenum;
+
+	/* endpoint buffer size out/max packet size */
+	u32 bufout_maxpkt;
+
+	/* endpoint setup buffer pointer */
+	u32 subptr;
+
+	/* endpoint data descriptor pointer */
+	u32 desptr;
+
+	/* reserved */
+	u32 reserved;
+
+	/* write/read confirmation */
+	u32 confirm;
+
+} __attribute__ ((packed));
+
+/* control data DMA desc */
+struct udc_stp_dma {
+	/* status quadlet */
+	u32	status;
+	/* reserved */
+	u32	_reserved;
+	/* first setup word */
+	u32	data12;
+	/* second setup word */
+	u32	data34;
+} __attribute__ ((aligned (16)));
+
+/* normal data DMA desc */
+struct udc_data_dma {
+	/* status quadlet */
+	u32	status;
+	/* reserved */
+	u32	_reserved;
+	/* buffer pointer */
+	u32	bufptr;
+	/* next descriptor pointer */
+	u32	next;
+} __attribute__ ((aligned (16)));
+
+/* request packet */
+struct udc_request {
+	/* embedded gadget ep */
+	struct usb_request		req;
+
+	/* flags */
+	unsigned			dma_going : 1,
+					dma_done : 1;
+	/* phys. address */
+	dma_addr_t			td_phys;
+	/* first dma desc. of chain */
+	struct udc_data_dma		*td_data;
+	/* last dma desc. of chain */
+	struct udc_data_dma		*td_data_last;
+	struct list_head		queue;
+
+	/* chain length */
+	unsigned			chain_len;
+
+};
+
+/* UDC specific endpoint parameters */
+struct udc_ep {
+	struct usb_ep			ep;
+	struct udc_ep_regs __iomem	*regs;
+	u32 __iomem			*txfifo;
+	u32 __iomem			*dma;
+	dma_addr_t			td_phys;
+	dma_addr_t			td_stp_dma;
+	struct udc_stp_dma		*td_stp;
+	struct udc_data_dma		*td;
+	/* temp request */
+	struct udc_request		*req;
+	unsigned			req_used;
+	unsigned			req_completed;
+	/* dummy DMA desc for BNA dummy */
+	struct udc_request		*bna_dummy_req;
+	unsigned			bna_occurred;
+
+	/* NAK state */
+	unsigned			naking;
+
+	struct udc			*dev;
+
+	/* queue for requests */
+	struct list_head		queue;
+	unsigned			halted;
+	unsigned			cancel_transfer;
+	unsigned			num : 5,
+					fifo_depth : 14,
+					in : 1;
+};
+
+/* device struct */
+struct udc {
+	struct usb_gadget		gadget;
+	spinlock_t			lock;	/* protects all state */
+	/* all endpoints */
+	struct udc_ep			ep[UDC_EP_NUM];
+	struct usb_gadget_driver	*driver;
+	/* operational flags */
+	unsigned			stall_ep0in : 1,
+					waiting_zlp_ack_ep0in : 1,
+					set_cfg_not_acked : 1,
+					data_ep_enabled : 1,
+					data_ep_queued : 1,
+					sys_suspended : 1,
+					connected;
+
+	u16				chiprev;
+
+	/* registers */
+	struct pci_dev			*pdev;
+	struct udc_csrs __iomem		*csr;
+	struct udc_regs __iomem		*regs;
+	struct udc_ep_regs __iomem	*ep_regs;
+	u32 __iomem			*rxfifo;
+	u32 __iomem			*txfifo;
+
+	/* DMA desc pools */
+	struct dma_pool			*data_requests;
+	struct dma_pool			*stp_requests;
+
+	/* device data */
+	unsigned long			phys_addr;
+	void __iomem			*virt_addr;
+	unsigned			irq;
+
+	/* states */
+	u16				cur_config;
+	u16				cur_intf;
+	u16				cur_alt;
+
+	/* for platform device and extcon support */
+	struct device			*dev;
+	struct phy			*udc_phy;
+	struct extcon_dev		*edev;
+	struct extcon_specific_cable_nb	extcon_nb;
+	struct notifier_block		nb;
+	struct delayed_work		drd_work;
+	u32				conn_type;
+};
+
+#define to_amd5536_udc(g)	(container_of((g), struct udc, gadget))
+
+/* setup request data */
+union udc_setup_data {
+	u32			data[2];
+	struct usb_ctrlrequest	request;
+};
+
+/* Function declarations */
+int udc_enable_dev_setup_interrupts(struct udc *dev);
+int udc_mask_unused_interrupts(struct udc *dev);
+irqreturn_t udc_irq(int irq, void *pdev);
+void gadget_release(struct device *pdev);
+void empty_req_queue(struct udc_ep *ep);
+void udc_basic_init(struct udc *dev);
+void free_dma_pools(struct udc *dev);
+int init_dma_pools(struct udc *dev);
+void udc_remove(struct udc *dev);
+int udc_probe(struct udc *dev);
+
+/* DMA usage flag */
+static bool use_dma = 1;
+/* packet per buffer dma */
+static bool use_dma_ppb = 1;
+/* with per descr. update */
+static bool use_dma_ppb_du;
+/* full speed only mode */
+static bool use_fullspeed;
+
+/* module parameters */
+module_param(use_dma, bool, S_IRUGO);
+MODULE_PARM_DESC(use_dma, "true for DMA");
+module_param(use_dma_ppb, bool, S_IRUGO);
+MODULE_PARM_DESC(use_dma_ppb, "true for DMA in packet per buffer mode");
+module_param(use_dma_ppb_du, bool, S_IRUGO);
+MODULE_PARM_DESC(use_dma_ppb_du,
+	"true for DMA in packet per buffer mode with descriptor update");
+module_param(use_fullspeed, bool, S_IRUGO);
+MODULE_PARM_DESC(use_fullspeed, "true for fullspeed only");
+/*
+ *---------------------------------------------------------------------------
+ * SET and GET bitfields in u32 values
+ * via constants for mask/offset:
+ * <bit_field_stub_name> is the text between
+ * UDC_ and _MASK|_OFS of appropriate
+ * constant
+ *
+ * set bitfield value in u32 u32Val
+ */
+#define AMD_ADDBITS(u32Val, bitfield_val, bitfield_stub_name)		\
+	(((u32Val) & (((u32) ~((u32) bitfield_stub_name##_MASK))))	\
+	| (((bitfield_val) << ((u32) bitfield_stub_name##_OFS))		\
+		& ((u32) bitfield_stub_name##_MASK)))
+
+/*
+ * set bitfield value in zero-initialized u32 u32Val
+ * => bitfield bits in u32Val are all zero
+ */
+#define AMD_INIT_SETBITS(u32Val, bitfield_val, bitfield_stub_name)	\
+	((u32Val)							\
+	| (((bitfield_val) << ((u32) bitfield_stub_name##_OFS))		\
+		& ((u32) bitfield_stub_name##_MASK)))
+
+/* get bitfield value from u32 u32Val */
+#define AMD_GETBITS(u32Val, bitfield_stub_name)				\
+	((u32Val & ((u32) bitfield_stub_name##_MASK))			\
+		>> ((u32) bitfield_stub_name##_OFS))
+
+/* SET and GET bits in u32 values ------------------------------------------*/
+#define AMD_BIT(bit_stub_name) (1 << bit_stub_name)
+#define AMD_UNMASK_BIT(bit_stub_name) (~AMD_BIT(bit_stub_name))
+#define AMD_CLEAR_BIT(bit_stub_name) (~AMD_BIT(bit_stub_name))
+
+/* debug macros ------------------------------------------------------------*/
+
+#define DBG(udc , args...)	dev_dbg(udc->dev, args)
+
+#ifdef UDC_VERBOSE
+#define VDBG			DBG
+#else
+#define VDBG(udc , args...)	do {} while (0)
+#endif
+
+#endif /* #ifdef AMD5536UDC_H */
diff --git a/drivers/usb/gadget/udc/amd5536udc_pci.c b/drivers/usb/gadget/udc/amd5536udc_pci.c
new file mode 100644
index 000000000..a36913ae3
--- /dev/null
+++ b/drivers/usb/gadget/udc/amd5536udc_pci.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * amd5536udc_pci.c -- AMD 5536 UDC high/full speed USB device controller
+ *
+ * Copyright (C) 2005-2007 AMD (https://www.amd.com)
+ * Author: Thomas Dahlmann
+ */
+
+/*
+ * The AMD5536 UDC is part of the x86 southbridge AMD Geode CS5536.
+ * It is a USB Highspeed DMA capable USB device controller. Beside ep0 it
+ * provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
+ *
+ * Make sure that UDC is assigned to port 4 by BIOS settings (port can also
+ * be used as host port) and UOC bits PAD_EN and APU are set (should be done
+ * by BIOS init).
+ *
+ * UDC DMA requires 32-bit aligned buffers so DMA with gadget ether does not
+ * work without updating NET_IP_ALIGN. Or PIO mode (module param "use_dma=0")
+ * can be used with gadget ether.
+ *
+ * This file does pci device registration, and the core driver implementation
+ * is done in amd5536udc.c
+ *
+ * The driver is split so as to use the core UDC driver which is based on
+ * Synopsys device controller IP (different than HS OTG IP) in UDCs
+ * integrated to SoC platforms.
+ *
+ */
+
+/* Driver strings */
+#define UDC_MOD_DESCRIPTION		"AMD 5536 UDC - USB Device Controller"
+
+/* system */
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/prefetch.h>
+#include <linux/pci.h>
+
+/* udc specific */
+#include "amd5536udc.h"
+
+/* pointer to device object */
+static struct udc *udc;
+
+/* description */
+static const char name[] = "amd5536udc-pci";
+
+/* Reset all pci context */
+static void udc_pci_remove(struct pci_dev *pdev)
+{
+	struct udc		*dev;
+
+	dev = pci_get_drvdata(pdev);
+
+	usb_del_gadget_udc(&udc->gadget);
+	/* gadget driver must not be registered */
+	if (WARN_ON(dev->driver))
+		return;
+
+	/* dma pool cleanup */
+	free_dma_pools(dev);
+
+	/* reset controller */
+	writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg);
+	free_irq(pdev->irq, dev);
+	iounmap(dev->virt_addr);
+	release_mem_region(pci_resource_start(pdev, 0),
+			   pci_resource_len(pdev, 0));
+	pci_disable_device(pdev);
+
+	udc_remove(dev);
+}
+
+/* Called by pci bus driver to init pci context */
+static int udc_pci_probe(
+	struct pci_dev *pdev,
+	const struct pci_device_id *id
+)
+{
+	struct udc		*dev;
+	unsigned long		resource;
+	unsigned long		len;
+	int			retval = 0;
+
+	/* one udc only */
+	if (udc) {
+		dev_dbg(&pdev->dev, "already probed\n");
+		return -EBUSY;
+	}
+
+	/* init */
+	dev = kzalloc(sizeof(struct udc), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	/* pci setup */
+	if (pci_enable_device(pdev) < 0) {
+		retval = -ENODEV;
+		goto err_pcidev;
+	}
+
+	/* PCI resource allocation */
+	resource = pci_resource_start(pdev, 0);
+	len = pci_resource_len(pdev, 0);
+
+	if (!request_mem_region(resource, len, name)) {
+		dev_dbg(&pdev->dev, "pci device used already\n");
+		retval = -EBUSY;
+		goto err_memreg;
+	}
+
+	dev->virt_addr = ioremap(resource, len);
+	if (!dev->virt_addr) {
+		dev_dbg(&pdev->dev, "start address cannot be mapped\n");
+		retval = -EFAULT;
+		goto err_ioremap;
+	}
+
+	if (!pdev->irq) {
+		dev_err(&pdev->dev, "irq not set\n");
+		retval = -ENODEV;
+		goto err_irq;
+	}
+
+	spin_lock_init(&dev->lock);
+	/* udc csr registers base */
+	dev->csr = dev->virt_addr + UDC_CSR_ADDR;
+	/* dev registers base */
+	dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR;
+	/* ep registers base */
+	dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR;
+	/* fifo's base */
+	dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR);
+	dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
+
+	if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
+		dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq);
+		retval = -EBUSY;
+		goto err_irq;
+	}
+
+	pci_set_drvdata(pdev, dev);
+
+	/* chip revision for Hs AMD5536 */
+	dev->chiprev = pdev->revision;
+
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
+	dev->phys_addr = resource;
+	dev->irq = pdev->irq;
+	dev->pdev = pdev;
+	dev->dev = &pdev->dev;
+
+	/* init dma pools */
+	if (use_dma) {
+		retval = init_dma_pools(dev);
+		if (retval != 0)
+			goto err_dma;
+	}
+
+	/* general probing */
+	if (udc_probe(dev)) {
+		retval = -ENODEV;
+		goto err_probe;
+	}
+
+	udc = dev;
+
+	return 0;
+
+err_probe:
+	if (use_dma)
+		free_dma_pools(dev);
+err_dma:
+	free_irq(pdev->irq, dev);
+err_irq:
+	iounmap(dev->virt_addr);
+err_ioremap:
+	release_mem_region(resource, len);
+err_memreg:
+	pci_disable_device(pdev);
+err_pcidev:
+	kfree(dev);
+	return retval;
+}
+
+/* PCI device parameters */
+static const struct pci_device_id pci_id[] = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x2096),
+		.class =	PCI_CLASS_SERIAL_USB_DEVICE,
+		.class_mask =	0xffffffff,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(pci, pci_id);
+
+/* PCI functions */
+static struct pci_driver udc_pci_driver = {
+	.name =		name,
+	.id_table =	pci_id,
+	.probe =	udc_pci_probe,
+	.remove =	udc_pci_remove,
+};
+module_pci_driver(udc_pci_driver);
+
+MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION);
+MODULE_AUTHOR("Thomas Dahlmann");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/Kconfig b/drivers/usb/gadget/udc/aspeed-vhub/Kconfig
new file mode 100644
index 000000000..605500b19
--- /dev/null
+++ b/drivers/usb/gadget/udc/aspeed-vhub/Kconfig
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0+
+config USB_ASPEED_VHUB
+	tristate "Aspeed vHub UDC driver"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	depends on USB_LIBCOMPOSITE
+	help
+	  USB peripheral controller for the Aspeed AST2400, AST2500 and
+	  AST2600 family SoCs supporting the "vHub" functionality and USB2.0
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/Makefile b/drivers/usb/gadget/udc/aspeed-vhub/Makefile
new file mode 100644
index 000000000..9f3add605
--- /dev/null
+++ b/drivers/usb/gadget/udc/aspeed-vhub/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0+
+obj-$(CONFIG_USB_ASPEED_VHUB)	+= aspeed-vhub.o
+aspeed-vhub-y	:= core.o ep0.o epn.o dev.o hub.o
+
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c
new file mode 100644
index 000000000..7a635c499
--- /dev/null
+++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget
+ *
+ * core.c - Top level support
+ *
+ * Copyright 2017 IBM Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/prefetch.h>
+#include <linux/clk.h>
+#include <linux/usb/gadget.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/dma-mapping.h>
+
+#include "vhub.h"
+
+void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req,
+		   int status)
+{
+	bool internal = req->internal;
+	struct ast_vhub *vhub = ep->vhub;
+
+	EPVDBG(ep, "completing request @%p, status %d\n", req, status);
+
+	list_del_init(&req->queue);
+
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+
+	if (req->req.dma) {
+		if (!WARN_ON(!ep->dev))
+			usb_gadget_unmap_request_by_dev(&vhub->pdev->dev,
+						 &req->req, ep->epn.is_in);
+		req->req.dma = 0;
+	}
+
+	/*
+	 * If this isn't an internal EP0 request, call the core
+	 * to call the gadget completion.
+	 */
+	if (!internal) {
+		spin_unlock(&ep->vhub->lock);
+		usb_gadget_giveback_request(&ep->ep, &req->req);
+		spin_lock(&ep->vhub->lock);
+	}
+}
+
+void ast_vhub_nuke(struct ast_vhub_ep *ep, int status)
+{
+	struct ast_vhub_req *req;
+	int count = 0;
+
+	/* Beware, lock will be dropped & req-acquired by done() */
+	while (!list_empty(&ep->queue)) {
+		req = list_first_entry(&ep->queue, struct ast_vhub_req, queue);
+		ast_vhub_done(ep, req, status);
+		count++;
+	}
+	if (count)
+		EPDBG(ep, "Nuked %d request(s)\n", count);
+}
+
+struct usb_request *ast_vhub_alloc_request(struct usb_ep *u_ep,
+					   gfp_t gfp_flags)
+{
+	struct ast_vhub_req *req;
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+	return &req->req;
+}
+
+void ast_vhub_free_request(struct usb_ep *u_ep, struct usb_request *u_req)
+{
+	struct ast_vhub_req *req = to_ast_req(u_req);
+
+	kfree(req);
+}
+
+static irqreturn_t ast_vhub_irq(int irq, void *data)
+{
+	struct ast_vhub *vhub = data;
+	irqreturn_t iret = IRQ_NONE;
+	u32 i, istat;
+
+	/* Stale interrupt while tearing down */
+	if (!vhub->ep0_bufs)
+		return IRQ_NONE;
+
+	spin_lock(&vhub->lock);
+
+	/* Read and ACK interrupts */
+	istat = readl(vhub->regs + AST_VHUB_ISR);
+	if (!istat)
+		goto bail;
+	writel(istat, vhub->regs + AST_VHUB_ISR);
+	iret = IRQ_HANDLED;
+
+	UDCVDBG(vhub, "irq status=%08x, ep_acks=%08x ep_nacks=%08x\n",
+	       istat,
+	       readl(vhub->regs + AST_VHUB_EP_ACK_ISR),
+	       readl(vhub->regs + AST_VHUB_EP_NACK_ISR));
+
+	/* Handle generic EPs first */
+	if (istat & VHUB_IRQ_EP_POOL_ACK_STALL) {
+		u32 ep_acks = readl(vhub->regs + AST_VHUB_EP_ACK_ISR);
+		writel(ep_acks, vhub->regs + AST_VHUB_EP_ACK_ISR);
+
+		for (i = 0; ep_acks && i < vhub->max_epns; i++) {
+			u32 mask = VHUB_EP_IRQ(i);
+			if (ep_acks & mask) {
+				ast_vhub_epn_ack_irq(&vhub->epns[i]);
+				ep_acks &= ~mask;
+			}
+		}
+	}
+
+	/* Handle device interrupts */
+	if (istat & vhub->port_irq_mask) {
+		for (i = 0; i < vhub->max_ports; i++) {
+			if (istat & VHUB_DEV_IRQ(i))
+				ast_vhub_dev_irq(&vhub->ports[i].dev);
+		}
+	}
+
+	/* Handle top-level vHub EP0 interrupts */
+	if (istat & (VHUB_IRQ_HUB_EP0_OUT_ACK_STALL |
+		     VHUB_IRQ_HUB_EP0_IN_ACK_STALL |
+		     VHUB_IRQ_HUB_EP0_SETUP)) {
+		if (istat & VHUB_IRQ_HUB_EP0_IN_ACK_STALL)
+			ast_vhub_ep0_handle_ack(&vhub->ep0, true);
+		if (istat & VHUB_IRQ_HUB_EP0_OUT_ACK_STALL)
+			ast_vhub_ep0_handle_ack(&vhub->ep0, false);
+		if (istat & VHUB_IRQ_HUB_EP0_SETUP)
+			ast_vhub_ep0_handle_setup(&vhub->ep0);
+	}
+
+	/* Various top level bus events */
+	if (istat & (VHUB_IRQ_BUS_RESUME |
+		     VHUB_IRQ_BUS_SUSPEND |
+		     VHUB_IRQ_BUS_RESET)) {
+		if (istat & VHUB_IRQ_BUS_RESUME)
+			ast_vhub_hub_resume(vhub);
+		if (istat & VHUB_IRQ_BUS_SUSPEND)
+			ast_vhub_hub_suspend(vhub);
+		if (istat & VHUB_IRQ_BUS_RESET)
+			ast_vhub_hub_reset(vhub);
+	}
+
+ bail:
+	spin_unlock(&vhub->lock);
+	return iret;
+}
+
+void ast_vhub_init_hw(struct ast_vhub *vhub)
+{
+	u32 ctrl, port_mask, epn_mask;
+
+	UDCDBG(vhub,"(Re)Starting HW ...\n");
+
+	/* Enable PHY */
+	ctrl = VHUB_CTRL_PHY_CLK |
+		VHUB_CTRL_PHY_RESET_DIS;
+
+       /*
+	* We do *NOT* set the VHUB_CTRL_CLK_STOP_SUSPEND bit
+	* to stop the logic clock during suspend because
+	* it causes the registers to become inaccessible and
+	* we haven't yet figured out a good wayt to bring the
+	* controller back into life to issue a wakeup.
+	*/
+
+	/*
+	 * Set some ISO & split control bits according to Aspeed
+	 * recommendation
+	 *
+	 * VHUB_CTRL_ISO_RSP_CTRL: When set tells the HW to respond
+	 * with 0 bytes data packet to ISO IN endpoints when no data
+	 * is available.
+	 *
+	 * VHUB_CTRL_SPLIT_IN: This makes a SOF complete a split IN
+	 * transaction.
+	 */
+	ctrl |= VHUB_CTRL_ISO_RSP_CTRL | VHUB_CTRL_SPLIT_IN;
+	writel(ctrl, vhub->regs + AST_VHUB_CTRL);
+	udelay(1);
+
+	/* Set descriptor ring size */
+	if (AST_VHUB_DESCS_COUNT == 256) {
+		ctrl |= VHUB_CTRL_LONG_DESC;
+		writel(ctrl, vhub->regs + AST_VHUB_CTRL);
+	} else {
+		BUILD_BUG_ON(AST_VHUB_DESCS_COUNT != 32);
+	}
+
+	/* Reset all devices */
+	port_mask = GENMASK(vhub->max_ports, 1);
+	writel(VHUB_SW_RESET_ROOT_HUB |
+	       VHUB_SW_RESET_DMA_CONTROLLER |
+	       VHUB_SW_RESET_EP_POOL |
+	       port_mask, vhub->regs + AST_VHUB_SW_RESET);
+	udelay(1);
+	writel(0, vhub->regs + AST_VHUB_SW_RESET);
+
+	/* Disable and cleanup EP ACK/NACK interrupts */
+	epn_mask = GENMASK(vhub->max_epns - 1, 0);
+	writel(0, vhub->regs + AST_VHUB_EP_ACK_IER);
+	writel(0, vhub->regs + AST_VHUB_EP_NACK_IER);
+	writel(epn_mask, vhub->regs + AST_VHUB_EP_ACK_ISR);
+	writel(epn_mask, vhub->regs + AST_VHUB_EP_NACK_ISR);
+
+	/* Default settings for EP0, enable HW hub EP1 */
+	writel(0, vhub->regs + AST_VHUB_EP0_CTRL);
+	writel(VHUB_EP1_CTRL_RESET_TOGGLE |
+	       VHUB_EP1_CTRL_ENABLE,
+	       vhub->regs + AST_VHUB_EP1_CTRL);
+	writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG);
+
+	/* Configure EP0 DMA buffer */
+	writel(vhub->ep0.buf_dma, vhub->regs + AST_VHUB_EP0_DATA);
+
+	/* Clear address */
+	writel(0, vhub->regs + AST_VHUB_CONF);
+
+	/* Pullup hub (activate on host) */
+	if (vhub->force_usb1)
+		ctrl |= VHUB_CTRL_FULL_SPEED_ONLY;
+
+	ctrl |= VHUB_CTRL_UPSTREAM_CONNECT;
+	writel(ctrl, vhub->regs + AST_VHUB_CTRL);
+
+	/* Enable some interrupts */
+	writel(VHUB_IRQ_HUB_EP0_IN_ACK_STALL |
+	       VHUB_IRQ_HUB_EP0_OUT_ACK_STALL |
+	       VHUB_IRQ_HUB_EP0_SETUP |
+	       VHUB_IRQ_EP_POOL_ACK_STALL |
+	       VHUB_IRQ_BUS_RESUME |
+	       VHUB_IRQ_BUS_SUSPEND |
+	       VHUB_IRQ_BUS_RESET,
+	       vhub->regs + AST_VHUB_IER);
+}
+
+static int ast_vhub_remove(struct platform_device *pdev)
+{
+	struct ast_vhub *vhub = platform_get_drvdata(pdev);
+	unsigned long flags;
+	int i;
+
+	if (!vhub || !vhub->regs)
+		return 0;
+
+	/* Remove devices */
+	for (i = 0; i < vhub->max_ports; i++)
+		ast_vhub_del_dev(&vhub->ports[i].dev);
+
+	spin_lock_irqsave(&vhub->lock, flags);
+
+	/* Mask & ack all interrupts  */
+	writel(0, vhub->regs + AST_VHUB_IER);
+	writel(VHUB_IRQ_ACK_ALL, vhub->regs + AST_VHUB_ISR);
+
+	/* Pull device, leave PHY enabled */
+	writel(VHUB_CTRL_PHY_CLK |
+	       VHUB_CTRL_PHY_RESET_DIS,
+	       vhub->regs + AST_VHUB_CTRL);
+
+	if (vhub->clk)
+		clk_disable_unprepare(vhub->clk);
+
+	spin_unlock_irqrestore(&vhub->lock, flags);
+
+	if (vhub->ep0_bufs)
+		dma_free_coherent(&pdev->dev,
+				  AST_VHUB_EP0_MAX_PACKET *
+				  (vhub->max_ports + 1),
+				  vhub->ep0_bufs,
+				  vhub->ep0_bufs_dma);
+	vhub->ep0_bufs = NULL;
+
+	return 0;
+}
+
+static int ast_vhub_probe(struct platform_device *pdev)
+{
+	enum usb_device_speed max_speed;
+	struct ast_vhub *vhub;
+	struct resource *res;
+	int i, rc = 0;
+	const struct device_node *np = pdev->dev.of_node;
+
+	vhub = devm_kzalloc(&pdev->dev, sizeof(*vhub), GFP_KERNEL);
+	if (!vhub)
+		return -ENOMEM;
+
+	rc = of_property_read_u32(np, "aspeed,vhub-downstream-ports",
+				  &vhub->max_ports);
+	if (rc < 0)
+		vhub->max_ports = AST_VHUB_NUM_PORTS;
+
+	vhub->ports = devm_kcalloc(&pdev->dev, vhub->max_ports,
+				   sizeof(*vhub->ports), GFP_KERNEL);
+	if (!vhub->ports)
+		return -ENOMEM;
+
+	rc = of_property_read_u32(np, "aspeed,vhub-generic-endpoints",
+				  &vhub->max_epns);
+	if (rc < 0)
+		vhub->max_epns = AST_VHUB_NUM_GEN_EPs;
+
+	vhub->epns = devm_kcalloc(&pdev->dev, vhub->max_epns,
+				  sizeof(*vhub->epns), GFP_KERNEL);
+	if (!vhub->epns)
+		return -ENOMEM;
+
+	spin_lock_init(&vhub->lock);
+	vhub->pdev = pdev;
+	vhub->port_irq_mask = GENMASK(VHUB_IRQ_DEV1_BIT + vhub->max_ports - 1,
+				      VHUB_IRQ_DEV1_BIT);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	vhub->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(vhub->regs)) {
+		dev_err(&pdev->dev, "Failed to map resources\n");
+		return PTR_ERR(vhub->regs);
+	}
+	UDCDBG(vhub, "vHub@%pR mapped @%p\n", res, vhub->regs);
+
+	platform_set_drvdata(pdev, vhub);
+
+	vhub->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(vhub->clk)) {
+		rc = PTR_ERR(vhub->clk);
+		goto err;
+	}
+	rc = clk_prepare_enable(vhub->clk);
+	if (rc) {
+		dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", rc);
+		goto err;
+	}
+
+	/* Check if we need to limit the HW to USB1 */
+	max_speed = usb_get_maximum_speed(&pdev->dev);
+	if (max_speed != USB_SPEED_UNKNOWN && max_speed < USB_SPEED_HIGH)
+		vhub->force_usb1 = true;
+
+	/* Mask & ack all interrupts before installing the handler */
+	writel(0, vhub->regs + AST_VHUB_IER);
+	writel(VHUB_IRQ_ACK_ALL, vhub->regs + AST_VHUB_ISR);
+
+	/* Find interrupt and install handler */
+	vhub->irq = platform_get_irq(pdev, 0);
+	if (vhub->irq < 0) {
+		rc = vhub->irq;
+		goto err;
+	}
+	rc = devm_request_irq(&pdev->dev, vhub->irq, ast_vhub_irq, 0,
+			      KBUILD_MODNAME, vhub);
+	if (rc) {
+		dev_err(&pdev->dev, "Failed to request interrupt\n");
+		goto err;
+	}
+
+	/*
+	 * Allocate DMA buffers for all EP0s in one chunk,
+	 * one per port and one for the vHub itself
+	 */
+	vhub->ep0_bufs = dma_alloc_coherent(&pdev->dev,
+					    AST_VHUB_EP0_MAX_PACKET *
+					    (vhub->max_ports + 1),
+					    &vhub->ep0_bufs_dma, GFP_KERNEL);
+	if (!vhub->ep0_bufs) {
+		dev_err(&pdev->dev, "Failed to allocate EP0 DMA buffers\n");
+		rc = -ENOMEM;
+		goto err;
+	}
+	UDCVDBG(vhub, "EP0 DMA buffers @%p (DMA 0x%08x)\n",
+		vhub->ep0_bufs, (u32)vhub->ep0_bufs_dma);
+
+	/* Init vHub EP0 */
+	ast_vhub_init_ep0(vhub, &vhub->ep0, NULL);
+
+	/* Init devices */
+	for (i = 0; i < vhub->max_ports && rc == 0; i++)
+		rc = ast_vhub_init_dev(vhub, i);
+	if (rc)
+		goto err;
+
+	/* Init hub emulation */
+	rc = ast_vhub_init_hub(vhub);
+	if (rc)
+		goto err;
+
+	/* Initialize HW */
+	ast_vhub_init_hw(vhub);
+
+	dev_info(&pdev->dev, "Initialized virtual hub in USB%d mode\n",
+		 vhub->force_usb1 ? 1 : 2);
+
+	return 0;
+ err:
+	ast_vhub_remove(pdev);
+	return rc;
+}
+
+static const struct of_device_id ast_vhub_dt_ids[] = {
+	{
+		.compatible = "aspeed,ast2400-usb-vhub",
+	},
+	{
+		.compatible = "aspeed,ast2500-usb-vhub",
+	},
+	{
+		.compatible = "aspeed,ast2600-usb-vhub",
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ast_vhub_dt_ids);
+
+static struct platform_driver ast_vhub_driver = {
+	.probe		= ast_vhub_probe,
+	.remove		= ast_vhub_remove,
+	.driver		= {
+		.name	= KBUILD_MODNAME,
+		.of_match_table	= ast_vhub_dt_ids,
+	},
+};
+module_platform_driver(ast_vhub_driver);
+
+MODULE_DESCRIPTION("Aspeed vHub udc driver");
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/dev.c b/drivers/usb/gadget/udc/aspeed-vhub/dev.c
new file mode 100644
index 000000000..4f3bc27c1
--- /dev/null
+++ b/drivers/usb/gadget/udc/aspeed-vhub/dev.c
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget
+ *
+ * dev.c - Individual device/gadget management (ie, a port = a gadget)
+ *
+ * Copyright 2017 IBM Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/prefetch.h>
+#include <linux/clk.h>
+#include <linux/usb/gadget.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "vhub.h"
+
+void ast_vhub_dev_irq(struct ast_vhub_dev *d)
+{
+	u32 istat = readl(d->regs + AST_VHUB_DEV_ISR);
+
+	writel(istat, d->regs + AST_VHUB_DEV_ISR);
+
+	if (istat & VHUV_DEV_IRQ_EP0_IN_ACK_STALL)
+		ast_vhub_ep0_handle_ack(&d->ep0, true);
+	if (istat & VHUV_DEV_IRQ_EP0_OUT_ACK_STALL)
+		ast_vhub_ep0_handle_ack(&d->ep0, false);
+	if (istat & VHUV_DEV_IRQ_EP0_SETUP)
+		ast_vhub_ep0_handle_setup(&d->ep0);
+}
+
+static void ast_vhub_dev_enable(struct ast_vhub_dev *d)
+{
+	u32 reg, hmsk, i;
+
+	if (d->enabled)
+		return;
+
+	/* Cleanup EP0 state */
+	ast_vhub_reset_ep0(d);
+
+	/* Enable device and its EP0 interrupts */
+	reg = VHUB_DEV_EN_ENABLE_PORT |
+		VHUB_DEV_EN_EP0_IN_ACK_IRQEN |
+		VHUB_DEV_EN_EP0_OUT_ACK_IRQEN |
+		VHUB_DEV_EN_EP0_SETUP_IRQEN;
+	if (d->gadget.speed == USB_SPEED_HIGH)
+		reg |= VHUB_DEV_EN_SPEED_SEL_HIGH;
+	writel(reg, d->regs + AST_VHUB_DEV_EN_CTRL);
+
+	/* Enable device interrupt in the hub as well */
+	hmsk = VHUB_IRQ_DEVICE1 << d->index;
+	reg = readl(d->vhub->regs + AST_VHUB_IER);
+	reg |= hmsk;
+	writel(reg, d->vhub->regs + AST_VHUB_IER);
+
+	/* Set EP0 DMA buffer address */
+	writel(d->ep0.buf_dma, d->regs + AST_VHUB_DEV_EP0_DATA);
+
+	/* Clear stall on all EPs */
+	for (i = 0; i < d->max_epns; i++) {
+		struct ast_vhub_ep *ep = d->epns[i];
+
+		if (ep && (ep->epn.stalled || ep->epn.wedged)) {
+			ep->epn.stalled = false;
+			ep->epn.wedged = false;
+			ast_vhub_update_epn_stall(ep);
+		}
+	}
+
+	/* Additional cleanups */
+	d->wakeup_en = false;
+	d->enabled = true;
+}
+
+static void ast_vhub_dev_disable(struct ast_vhub_dev *d)
+{
+	u32 reg, hmsk;
+
+	if (!d->enabled)
+		return;
+
+	/* Disable device interrupt in the hub */
+	hmsk = VHUB_IRQ_DEVICE1 << d->index;
+	reg = readl(d->vhub->regs + AST_VHUB_IER);
+	reg &= ~hmsk;
+	writel(reg, d->vhub->regs + AST_VHUB_IER);
+
+	/* Then disable device */
+	writel(0, d->regs + AST_VHUB_DEV_EN_CTRL);
+	d->gadget.speed = USB_SPEED_UNKNOWN;
+	d->enabled = false;
+}
+
+static int ast_vhub_dev_feature(struct ast_vhub_dev *d,
+				u16 wIndex, u16 wValue,
+				bool is_set)
+{
+	u32 val;
+
+	DDBG(d, "%s_FEATURE(dev val=%02x)\n",
+	     is_set ? "SET" : "CLEAR", wValue);
+
+	if (wValue == USB_DEVICE_REMOTE_WAKEUP) {
+		d->wakeup_en = is_set;
+		return std_req_complete;
+	}
+
+	if (wValue == USB_DEVICE_TEST_MODE) {
+		val = readl(d->vhub->regs + AST_VHUB_CTRL);
+		val &= ~GENMASK(10, 8);
+		val |= VHUB_CTRL_SET_TEST_MODE((wIndex >> 8) & 0x7);
+		writel(val, d->vhub->regs + AST_VHUB_CTRL);
+
+		return std_req_complete;
+	}
+
+	return std_req_driver;
+}
+
+static int ast_vhub_ep_feature(struct ast_vhub_dev *d,
+			       u16 wIndex, u16 wValue, bool is_set)
+{
+	struct ast_vhub_ep *ep;
+	int ep_num;
+
+	ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK;
+	DDBG(d, "%s_FEATURE(ep%d val=%02x)\n",
+	     is_set ? "SET" : "CLEAR", ep_num, wValue);
+	if (ep_num == 0)
+		return std_req_complete;
+	if (ep_num >= d->max_epns || !d->epns[ep_num - 1])
+		return std_req_stall;
+	if (wValue != USB_ENDPOINT_HALT)
+		return std_req_driver;
+
+	ep = d->epns[ep_num - 1];
+	if (WARN_ON(!ep))
+		return std_req_stall;
+
+	if (!ep->epn.enabled || !ep->ep.desc || ep->epn.is_iso ||
+	    ep->epn.is_in != !!(wIndex & USB_DIR_IN))
+		return std_req_stall;
+
+	DDBG(d, "%s stall on EP %d\n",
+	     is_set ? "setting" : "clearing", ep_num);
+	ep->epn.stalled = is_set;
+	ast_vhub_update_epn_stall(ep);
+
+	return std_req_complete;
+}
+
+static int ast_vhub_dev_status(struct ast_vhub_dev *d,
+			       u16 wIndex, u16 wValue)
+{
+	u8 st0;
+
+	DDBG(d, "GET_STATUS(dev)\n");
+
+	st0 = d->gadget.is_selfpowered << USB_DEVICE_SELF_POWERED;
+	if (d->wakeup_en)
+		st0 |= 1 << USB_DEVICE_REMOTE_WAKEUP;
+
+	return ast_vhub_simple_reply(&d->ep0, st0, 0);
+}
+
+static int ast_vhub_ep_status(struct ast_vhub_dev *d,
+			      u16 wIndex, u16 wValue)
+{
+	int ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK;
+	struct ast_vhub_ep *ep;
+	u8 st0 = 0;
+
+	DDBG(d, "GET_STATUS(ep%d)\n", ep_num);
+
+	if (ep_num >= d->max_epns)
+		return std_req_stall;
+	if (ep_num != 0) {
+		ep = d->epns[ep_num - 1];
+		if (!ep)
+			return std_req_stall;
+		if (!ep->epn.enabled || !ep->ep.desc || ep->epn.is_iso ||
+		    ep->epn.is_in != !!(wIndex & USB_DIR_IN))
+			return std_req_stall;
+		if (ep->epn.stalled)
+			st0 |= 1 << USB_ENDPOINT_HALT;
+	}
+
+	return ast_vhub_simple_reply(&d->ep0, st0, 0);
+}
+
+static void ast_vhub_dev_set_address(struct ast_vhub_dev *d, u8 addr)
+{
+	u32 reg;
+
+	DDBG(d, "SET_ADDRESS: Got address %x\n", addr);
+
+	reg = readl(d->regs + AST_VHUB_DEV_EN_CTRL);
+	reg &= ~VHUB_DEV_EN_ADDR_MASK;
+	reg |= VHUB_DEV_EN_SET_ADDR(addr);
+	writel(reg, d->regs + AST_VHUB_DEV_EN_CTRL);
+}
+
+int ast_vhub_std_dev_request(struct ast_vhub_ep *ep,
+			     struct usb_ctrlrequest *crq)
+{
+	struct ast_vhub_dev *d = ep->dev;
+	u16 wValue, wIndex;
+
+	/* No driver, we shouldn't be enabled ... */
+	if (!d->driver || !d->enabled) {
+		EPDBG(ep,
+		      "Device is wrong state driver=%p enabled=%d\n",
+		      d->driver, d->enabled);
+		return std_req_stall;
+	}
+
+	/*
+	 * Note: we used to reject/stall requests while suspended,
+	 * we don't do that anymore as we seem to have cases of
+	 * mass storage getting very upset.
+	 */
+
+	/* First packet, grab speed */
+	if (d->gadget.speed == USB_SPEED_UNKNOWN) {
+		d->gadget.speed = ep->vhub->speed;
+		if (d->gadget.speed > d->driver->max_speed)
+			d->gadget.speed = d->driver->max_speed;
+		DDBG(d, "fist packet, captured speed %d\n",
+		     d->gadget.speed);
+	}
+
+	wValue = le16_to_cpu(crq->wValue);
+	wIndex = le16_to_cpu(crq->wIndex);
+
+	switch ((crq->bRequestType << 8) | crq->bRequest) {
+		/* SET_ADDRESS */
+	case DeviceOutRequest | USB_REQ_SET_ADDRESS:
+		ast_vhub_dev_set_address(d, wValue);
+		return std_req_complete;
+
+		/* GET_STATUS */
+	case DeviceRequest | USB_REQ_GET_STATUS:
+		return ast_vhub_dev_status(d, wIndex, wValue);
+	case InterfaceRequest | USB_REQ_GET_STATUS:
+		return ast_vhub_simple_reply(ep, 0, 0);
+	case EndpointRequest | USB_REQ_GET_STATUS:
+		return ast_vhub_ep_status(d, wIndex, wValue);
+
+		/* SET/CLEAR_FEATURE */
+	case DeviceOutRequest | USB_REQ_SET_FEATURE:
+		return ast_vhub_dev_feature(d, wIndex, wValue, true);
+	case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
+		return ast_vhub_dev_feature(d, wIndex, wValue, false);
+	case EndpointOutRequest | USB_REQ_SET_FEATURE:
+		return ast_vhub_ep_feature(d, wIndex, wValue, true);
+	case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
+		return ast_vhub_ep_feature(d, wIndex, wValue, false);
+	}
+	return std_req_driver;
+}
+
+static int ast_vhub_udc_wakeup(struct usb_gadget* gadget)
+{
+	struct ast_vhub_dev *d = to_ast_dev(gadget);
+	unsigned long flags;
+	int rc = -EINVAL;
+
+	spin_lock_irqsave(&d->vhub->lock, flags);
+	if (!d->wakeup_en)
+		goto err;
+
+	DDBG(d, "Device initiated wakeup\n");
+
+	/* Wakeup the host */
+	ast_vhub_hub_wake_all(d->vhub);
+	rc = 0;
+ err:
+	spin_unlock_irqrestore(&d->vhub->lock, flags);
+	return rc;
+}
+
+static int ast_vhub_udc_get_frame(struct usb_gadget* gadget)
+{
+	struct ast_vhub_dev *d = to_ast_dev(gadget);
+
+	return (readl(d->vhub->regs + AST_VHUB_USBSTS) >> 16) & 0x7ff;
+}
+
+static void ast_vhub_dev_nuke(struct ast_vhub_dev *d)
+{
+	unsigned int i;
+
+	for (i = 0; i < d->max_epns; i++) {
+		if (!d->epns[i])
+			continue;
+		ast_vhub_nuke(d->epns[i], -ESHUTDOWN);
+	}
+}
+
+static int ast_vhub_udc_pullup(struct usb_gadget* gadget, int on)
+{
+	struct ast_vhub_dev *d = to_ast_dev(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&d->vhub->lock, flags);
+
+	DDBG(d, "pullup(%d)\n", on);
+
+	/* Mark disconnected in the hub */
+	ast_vhub_device_connect(d->vhub, d->index, on);
+
+	/*
+	 * If enabled, nuke all requests if any (there shouldn't be)
+	 * and disable the port. This will clear the address too.
+	 */
+	if (d->enabled) {
+		ast_vhub_dev_nuke(d);
+		ast_vhub_dev_disable(d);
+	}
+
+	spin_unlock_irqrestore(&d->vhub->lock, flags);
+
+	return 0;
+}
+
+static int ast_vhub_udc_start(struct usb_gadget *gadget,
+			      struct usb_gadget_driver *driver)
+{
+	struct ast_vhub_dev *d = to_ast_dev(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&d->vhub->lock, flags);
+
+	DDBG(d, "start\n");
+
+	/* We don't do much more until the hub enables us */
+	d->driver = driver;
+	d->gadget.is_selfpowered = 1;
+
+	spin_unlock_irqrestore(&d->vhub->lock, flags);
+
+	return 0;
+}
+
+static struct usb_ep *ast_vhub_udc_match_ep(struct usb_gadget *gadget,
+					    struct usb_endpoint_descriptor *desc,
+					    struct usb_ss_ep_comp_descriptor *ss)
+{
+	struct ast_vhub_dev *d = to_ast_dev(gadget);
+	struct ast_vhub_ep *ep;
+	struct usb_ep *u_ep;
+	unsigned int max, addr, i;
+
+	DDBG(d, "Match EP type %d\n", usb_endpoint_type(desc));
+
+	/*
+	 * First we need to look for an existing unclaimed EP as another
+	 * configuration may have already associated a bunch of EPs with
+	 * this gadget. This duplicates the code in usb_ep_autoconfig_ss()
+	 * unfortunately.
+	 */
+	list_for_each_entry(u_ep, &gadget->ep_list, ep_list) {
+		if (usb_gadget_ep_match_desc(gadget, u_ep, desc, ss)) {
+			DDBG(d, " -> using existing EP%d\n",
+			     to_ast_ep(u_ep)->d_idx);
+			return u_ep;
+		}
+	}
+
+	/*
+	 * We didn't find one, we need to grab one from the pool.
+	 *
+	 * First let's do some sanity checking
+	 */
+	switch(usb_endpoint_type(desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* Only EP0 can be a control endpoint */
+		return NULL;
+	case USB_ENDPOINT_XFER_ISOC:
+		/* ISO:	 limit 1023 bytes full speed, 1024 high/super speed */
+		if (gadget_is_dualspeed(gadget))
+			max = 1024;
+		else
+			max = 1023;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		if (gadget_is_dualspeed(gadget))
+			max = 512;
+		else
+			max = 64;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		if (gadget_is_dualspeed(gadget))
+			max = 1024;
+		else
+			max = 64;
+		break;
+	}
+	if (usb_endpoint_maxp(desc) > max)
+		return NULL;
+
+	/*
+	 * Find a free EP address for that device. We can't
+	 * let the generic code assign these as it would
+	 * create overlapping numbers for IN and OUT which
+	 * we don't support, so also create a suitable name
+	 * that will allow the generic code to use our
+	 * assigned address.
+	 */
+	for (i = 0; i < d->max_epns; i++)
+		if (d->epns[i] == NULL)
+			break;
+	if (i >= d->max_epns)
+		return NULL;
+	addr = i + 1;
+
+	/*
+	 * Now grab an EP from the shared pool and associate
+	 * it with our device
+	 */
+	ep = ast_vhub_alloc_epn(d, addr);
+	if (!ep)
+		return NULL;
+	DDBG(d, "Allocated epn#%d for port EP%d\n",
+	     ep->epn.g_idx, addr);
+
+	return &ep->ep;
+}
+
+static int ast_vhub_udc_stop(struct usb_gadget *gadget)
+{
+	struct ast_vhub_dev *d = to_ast_dev(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&d->vhub->lock, flags);
+
+	DDBG(d, "stop\n");
+
+	d->driver = NULL;
+	d->gadget.speed = USB_SPEED_UNKNOWN;
+
+	ast_vhub_dev_nuke(d);
+
+	if (d->enabled)
+		ast_vhub_dev_disable(d);
+
+	spin_unlock_irqrestore(&d->vhub->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops ast_vhub_udc_ops = {
+	.get_frame	= ast_vhub_udc_get_frame,
+	.wakeup		= ast_vhub_udc_wakeup,
+	.pullup		= ast_vhub_udc_pullup,
+	.udc_start	= ast_vhub_udc_start,
+	.udc_stop	= ast_vhub_udc_stop,
+	.match_ep	= ast_vhub_udc_match_ep,
+};
+
+void ast_vhub_dev_suspend(struct ast_vhub_dev *d)
+{
+	if (d->driver && d->driver->suspend) {
+		spin_unlock(&d->vhub->lock);
+		d->driver->suspend(&d->gadget);
+		spin_lock(&d->vhub->lock);
+	}
+}
+
+void ast_vhub_dev_resume(struct ast_vhub_dev *d)
+{
+	if (d->driver && d->driver->resume) {
+		spin_unlock(&d->vhub->lock);
+		d->driver->resume(&d->gadget);
+		spin_lock(&d->vhub->lock);
+	}
+}
+
+void ast_vhub_dev_reset(struct ast_vhub_dev *d)
+{
+	/* No driver, just disable the device and return */
+	if (!d->driver) {
+		ast_vhub_dev_disable(d);
+		return;
+	}
+
+	/* If the port isn't enabled, just enable it */
+	if (!d->enabled) {
+		DDBG(d, "Reset of disabled device, enabling...\n");
+		ast_vhub_dev_enable(d);
+	} else {
+		DDBG(d, "Reset of enabled device, resetting...\n");
+		spin_unlock(&d->vhub->lock);
+		usb_gadget_udc_reset(&d->gadget, d->driver);
+		spin_lock(&d->vhub->lock);
+
+		/*
+		 * Disable and maybe re-enable HW, this will clear the address
+		 * and speed setting.
+		 */
+		ast_vhub_dev_disable(d);
+		ast_vhub_dev_enable(d);
+	}
+}
+
+void ast_vhub_del_dev(struct ast_vhub_dev *d)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&d->vhub->lock, flags);
+	if (!d->registered) {
+		spin_unlock_irqrestore(&d->vhub->lock, flags);
+		return;
+	}
+	d->registered = false;
+	spin_unlock_irqrestore(&d->vhub->lock, flags);
+
+	usb_del_gadget_udc(&d->gadget);
+	device_unregister(d->port_dev);
+	kfree(d->epns);
+}
+
+static void ast_vhub_dev_release(struct device *dev)
+{
+	kfree(dev);
+}
+
+int ast_vhub_init_dev(struct ast_vhub *vhub, unsigned int idx)
+{
+	struct ast_vhub_dev *d = &vhub->ports[idx].dev;
+	struct device *parent = &vhub->pdev->dev;
+	int rc;
+
+	d->vhub = vhub;
+	d->index = idx;
+	d->name = devm_kasprintf(parent, GFP_KERNEL, "port%d", idx+1);
+	d->regs = vhub->regs + 0x100 + 0x10 * idx;
+
+	ast_vhub_init_ep0(vhub, &d->ep0, d);
+
+	/*
+	 * A USB device can have up to 30 endpoints besides control
+	 * endpoint 0.
+	 */
+	d->max_epns = min_t(u32, vhub->max_epns, 30);
+	d->epns = kcalloc(d->max_epns, sizeof(*d->epns), GFP_KERNEL);
+	if (!d->epns)
+		return -ENOMEM;
+
+	/*
+	 * The UDC core really needs us to have separate and uniquely
+	 * named "parent" devices for each port so we create a sub device
+	 * here for that purpose
+	 */
+	d->port_dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+	if (!d->port_dev) {
+		rc = -ENOMEM;
+		goto fail_alloc;
+	}
+	device_initialize(d->port_dev);
+	d->port_dev->release = ast_vhub_dev_release;
+	d->port_dev->parent = parent;
+	dev_set_name(d->port_dev, "%s:p%d", dev_name(parent), idx + 1);
+	rc = device_add(d->port_dev);
+	if (rc)
+		goto fail_add;
+
+	/* Populate gadget */
+	INIT_LIST_HEAD(&d->gadget.ep_list);
+	d->gadget.ops = &ast_vhub_udc_ops;
+	d->gadget.ep0 = &d->ep0.ep;
+	d->gadget.name = KBUILD_MODNAME;
+	if (vhub->force_usb1)
+		d->gadget.max_speed = USB_SPEED_FULL;
+	else
+		d->gadget.max_speed = USB_SPEED_HIGH;
+	d->gadget.speed = USB_SPEED_UNKNOWN;
+	d->gadget.dev.of_node = vhub->pdev->dev.of_node;
+	d->gadget.dev.of_node_reused = true;
+
+	rc = usb_add_gadget_udc(d->port_dev, &d->gadget);
+	if (rc != 0)
+		goto fail_udc;
+	d->registered = true;
+
+	return 0;
+ fail_udc:
+	device_del(d->port_dev);
+ fail_add:
+	put_device(d->port_dev);
+ fail_alloc:
+	kfree(d->epns);
+
+	return rc;
+}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c
new file mode 100644
index 000000000..b4cf46249
--- /dev/null
+++ b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c
@@ -0,0 +1,522 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget
+ *
+ * ep0.c - Endpoint 0 handling
+ *
+ * Copyright 2017 IBM Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/prefetch.h>
+#include <linux/clk.h>
+#include <linux/usb/gadget.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/dma-mapping.h>
+
+#include "vhub.h"
+
+int ast_vhub_reply(struct ast_vhub_ep *ep, char *ptr, int len)
+{
+	struct usb_request *req = &ep->ep0.req.req;
+	int rc;
+
+	if (WARN_ON(ep->d_idx != 0))
+		return std_req_stall;
+	if (WARN_ON(!ep->ep0.dir_in))
+		return std_req_stall;
+	if (WARN_ON(len > AST_VHUB_EP0_MAX_PACKET))
+		return std_req_stall;
+	if (WARN_ON(req->status == -EINPROGRESS))
+		return std_req_stall;
+
+	req->buf = ptr;
+	req->length = len;
+	req->complete = NULL;
+	req->zero = true;
+
+	/*
+	 * Call internal queue directly after dropping the lock. This is
+	 * safe to do as the reply is always the last thing done when
+	 * processing a SETUP packet, usually as a tail call
+	 */
+	spin_unlock(&ep->vhub->lock);
+	if (ep->ep.ops->queue(&ep->ep, req, GFP_ATOMIC))
+		rc = std_req_stall;
+	else
+		rc = std_req_data;
+	spin_lock(&ep->vhub->lock);
+	return rc;
+}
+
+int __ast_vhub_simple_reply(struct ast_vhub_ep *ep, int len, ...)
+{
+	u8 *buffer = ep->buf;
+	unsigned int i;
+	va_list args;
+
+	va_start(args, len);
+
+	/* Copy data directly into EP buffer */
+	for (i = 0; i < len; i++)
+		buffer[i] = va_arg(args, int);
+	va_end(args);
+
+	/* req->buf NULL means data is already there */
+	return ast_vhub_reply(ep, NULL, len);
+}
+
+void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep)
+{
+	struct usb_ctrlrequest crq;
+	enum std_req_rc std_req_rc;
+	int rc = -ENODEV;
+
+	if (WARN_ON(ep->d_idx != 0))
+		return;
+
+	/*
+	 * Grab the setup packet from the chip and byteswap
+	 * interesting fields
+	 */
+	memcpy_fromio(&crq, ep->ep0.setup, sizeof(crq));
+
+	EPDBG(ep, "SETUP packet %02x/%02x/%04x/%04x/%04x [%s] st=%d\n",
+	      crq.bRequestType, crq.bRequest,
+	       le16_to_cpu(crq.wValue),
+	       le16_to_cpu(crq.wIndex),
+	       le16_to_cpu(crq.wLength),
+	       (crq.bRequestType & USB_DIR_IN) ? "in" : "out",
+	       ep->ep0.state);
+
+	/*
+	 * Check our state, cancel pending requests if needed
+	 *
+	 * Note: Under some circumstances, we can get a new setup
+	 * packet while waiting for the stall ack, just accept it.
+	 *
+	 * In any case, a SETUP packet in wrong state should have
+	 * reset the HW state machine, so let's just log, nuke
+	 * requests, move on.
+	 */
+	if (ep->ep0.state != ep0_state_token &&
+	    ep->ep0.state != ep0_state_stall) {
+		EPDBG(ep, "wrong state\n");
+		ast_vhub_nuke(ep, -EIO);
+	}
+
+	/* Calculate next state for EP0 */
+	ep->ep0.state = ep0_state_data;
+	ep->ep0.dir_in = !!(crq.bRequestType & USB_DIR_IN);
+
+	/* If this is the vHub, we handle requests differently */
+	std_req_rc = std_req_driver;
+	if (ep->dev == NULL) {
+		if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+			std_req_rc = ast_vhub_std_hub_request(ep, &crq);
+		else if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS)
+			std_req_rc = ast_vhub_class_hub_request(ep, &crq);
+		else
+			std_req_rc = std_req_stall;
+	} else if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+		std_req_rc = ast_vhub_std_dev_request(ep, &crq);
+
+	/* Act upon result */
+	switch(std_req_rc) {
+	case std_req_complete:
+		goto complete;
+	case std_req_stall:
+		goto stall;
+	case std_req_driver:
+		break;
+	case std_req_data:
+		return;
+	}
+
+	/* Pass request up to the gadget driver */
+	if (WARN_ON(!ep->dev))
+		goto stall;
+	if (ep->dev->driver) {
+		EPDBG(ep, "forwarding to gadget...\n");
+		spin_unlock(&ep->vhub->lock);
+		rc = ep->dev->driver->setup(&ep->dev->gadget, &crq);
+		spin_lock(&ep->vhub->lock);
+		EPDBG(ep, "driver returned %d\n", rc);
+	} else {
+		EPDBG(ep, "no gadget for request !\n");
+	}
+	if (rc >= 0)
+		return;
+
+ stall:
+	EPDBG(ep, "stalling\n");
+	writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat);
+	ep->ep0.state = ep0_state_stall;
+	ep->ep0.dir_in = false;
+	return;
+
+ complete:
+	EPVDBG(ep, "sending [in] status with no data\n");
+	writel(VHUB_EP0_TX_BUFF_RDY, ep->ep0.ctlstat);
+	ep->ep0.state = ep0_state_status;
+	ep->ep0.dir_in = false;
+}
+
+
+static void ast_vhub_ep0_do_send(struct ast_vhub_ep *ep,
+				 struct ast_vhub_req *req)
+{
+	unsigned int chunk;
+	u32 reg;
+
+	/* If this is a 0-length request, it's the gadget trying to
+	 * send a status on our behalf. We take it from here.
+	 */
+	if (req->req.length == 0)
+		req->last_desc = 1;
+
+	/* Are we done ? Complete request, otherwise wait for next interrupt */
+	if (req->last_desc >= 0) {
+		EPVDBG(ep, "complete send %d/%d\n",
+		       req->req.actual, req->req.length);
+		ep->ep0.state = ep0_state_status;
+		writel(VHUB_EP0_RX_BUFF_RDY, ep->ep0.ctlstat);
+		ast_vhub_done(ep, req, 0);
+		return;
+	}
+
+	/*
+	 * Next chunk cropped to max packet size. Also check if this
+	 * is the last packet
+	 */
+	chunk = req->req.length - req->req.actual;
+	if (chunk > ep->ep.maxpacket)
+		chunk = ep->ep.maxpacket;
+	else if ((chunk < ep->ep.maxpacket) || !req->req.zero)
+		req->last_desc = 1;
+
+	EPVDBG(ep, "send chunk=%d last=%d, req->act=%d mp=%d\n",
+	       chunk, req->last_desc, req->req.actual, ep->ep.maxpacket);
+
+	/*
+	 * Copy data if any (internal requests already have data
+	 * in the EP buffer)
+	 */
+	if (chunk && req->req.buf)
+		memcpy(ep->buf, req->req.buf + req->req.actual, chunk);
+
+	vhub_dma_workaround(ep->buf);
+
+	/* Remember chunk size and trigger send */
+	reg = VHUB_EP0_SET_TX_LEN(chunk);
+	writel(reg, ep->ep0.ctlstat);
+	writel(reg | VHUB_EP0_TX_BUFF_RDY, ep->ep0.ctlstat);
+	req->req.actual += chunk;
+}
+
+static void ast_vhub_ep0_rx_prime(struct ast_vhub_ep *ep)
+{
+	EPVDBG(ep, "rx prime\n");
+
+	/* Prime endpoint for receiving data */
+	writel(VHUB_EP0_RX_BUFF_RDY, ep->ep0.ctlstat);
+}
+
+static void ast_vhub_ep0_do_receive(struct ast_vhub_ep *ep, struct ast_vhub_req *req,
+				    unsigned int len)
+{
+	unsigned int remain;
+	int rc = 0;
+
+	/* We are receiving... grab request */
+	remain = req->req.length - req->req.actual;
+
+	EPVDBG(ep, "receive got=%d remain=%d\n", len, remain);
+
+	/* Are we getting more than asked ? */
+	if (len > remain) {
+		EPDBG(ep, "receiving too much (ovf: %d) !\n",
+		      len - remain);
+		len = remain;
+		rc = -EOVERFLOW;
+	}
+
+	/* Hardware return wrong data len */
+	if (len < ep->ep.maxpacket && len != remain) {
+		EPDBG(ep, "using expected data len instead\n");
+		len = remain;
+	}
+
+	if (len && req->req.buf)
+		memcpy(req->req.buf + req->req.actual, ep->buf, len);
+	req->req.actual += len;
+
+	/* Done ? */
+	if (len < ep->ep.maxpacket || len == remain) {
+		ep->ep0.state = ep0_state_status;
+		writel(VHUB_EP0_TX_BUFF_RDY, ep->ep0.ctlstat);
+		ast_vhub_done(ep, req, rc);
+	} else
+		ast_vhub_ep0_rx_prime(ep);
+}
+
+void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack)
+{
+	struct ast_vhub_req *req;
+	struct ast_vhub *vhub = ep->vhub;
+	struct device *dev = &vhub->pdev->dev;
+	bool stall = false;
+	u32 stat;
+
+	/* Read EP0 status */
+	stat = readl(ep->ep0.ctlstat);
+
+	/* Grab current request if any */
+	req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue);
+
+	EPVDBG(ep, "ACK status=%08x,state=%d is_in=%d in_ack=%d req=%p\n",
+		stat, ep->ep0.state, ep->ep0.dir_in, in_ack, req);
+
+	switch(ep->ep0.state) {
+	case ep0_state_token:
+		/* There should be no request queued in that state... */
+		if (req) {
+			dev_warn(dev, "request present while in TOKEN state\n");
+			ast_vhub_nuke(ep, -EINVAL);
+		}
+		dev_warn(dev, "ack while in TOKEN state\n");
+		stall = true;
+		break;
+	case ep0_state_data:
+		/* Check the state bits corresponding to our direction */
+		if ((ep->ep0.dir_in && (stat & VHUB_EP0_TX_BUFF_RDY)) ||
+		    (!ep->ep0.dir_in && (stat & VHUB_EP0_RX_BUFF_RDY)) ||
+		    (ep->ep0.dir_in != in_ack)) {
+			/* In that case, ignore interrupt */
+			dev_warn(dev, "irq state mismatch");
+			break;
+		}
+		/*
+		 * We are in data phase and there's no request, something is
+		 * wrong, stall
+		 */
+		if (!req) {
+			dev_warn(dev, "data phase, no request\n");
+			stall = true;
+			break;
+		}
+
+		/* We have a request, handle data transfers */
+		if (ep->ep0.dir_in)
+			ast_vhub_ep0_do_send(ep, req);
+		else
+			ast_vhub_ep0_do_receive(ep, req, VHUB_EP0_RX_LEN(stat));
+		return;
+	case ep0_state_status:
+		/* Nuke stale requests */
+		if (req) {
+			dev_warn(dev, "request present while in STATUS state\n");
+			ast_vhub_nuke(ep, -EINVAL);
+		}
+
+		/*
+		 * If the status phase completes with the wrong ack, stall
+		 * the endpoint just in case, to abort whatever the host
+		 * was doing.
+		 */
+		if (ep->ep0.dir_in == in_ack) {
+			dev_warn(dev, "status direction mismatch\n");
+			stall = true;
+		}
+		break;
+	case ep0_state_stall:
+		/*
+		 * There shouldn't be any request left, but nuke just in case
+		 * otherwise the stale request will block subsequent ones
+		 */
+		ast_vhub_nuke(ep, -EIO);
+		break;
+	}
+
+	/* Reset to token state or stall */
+	if (stall) {
+		writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat);
+		ep->ep0.state = ep0_state_stall;
+	} else
+		ep->ep0.state = ep0_state_token;
+}
+
+static int ast_vhub_ep0_queue(struct usb_ep* u_ep, struct usb_request *u_req,
+			      gfp_t gfp_flags)
+{
+	struct ast_vhub_req *req = to_ast_req(u_req);
+	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
+	struct ast_vhub *vhub = ep->vhub;
+	struct device *dev = &vhub->pdev->dev;
+	unsigned long flags;
+
+	/* Paranoid cheks */
+	if (!u_req || (!u_req->complete && !req->internal)) {
+		dev_warn(dev, "Bogus EP0 request ! u_req=%p\n", u_req);
+		if (u_req) {
+			dev_warn(dev, "complete=%p internal=%d\n",
+				 u_req->complete, req->internal);
+		}
+		return -EINVAL;
+	}
+
+	/* Not endpoint 0 ? */
+	if (WARN_ON(ep->d_idx != 0))
+		return -EINVAL;
+
+	/* Disabled device */
+	if (ep->dev && !ep->dev->enabled)
+		return -ESHUTDOWN;
+
+	/* Data, no buffer and not internal ? */
+	if (u_req->length && !u_req->buf && !req->internal) {
+		dev_warn(dev, "Request with no buffer !\n");
+		return -EINVAL;
+	}
+
+	EPVDBG(ep, "enqueue req @%p\n", req);
+	EPVDBG(ep, "  l=%d zero=%d noshort=%d is_in=%d\n",
+	       u_req->length, u_req->zero,
+	       u_req->short_not_ok, ep->ep0.dir_in);
+
+	/* Initialize request progress fields */
+	u_req->status = -EINPROGRESS;
+	u_req->actual = 0;
+	req->last_desc = -1;
+	req->active = false;
+
+	spin_lock_irqsave(&vhub->lock, flags);
+
+	/* EP0 can only support a single request at a time */
+	if (!list_empty(&ep->queue) ||
+	    ep->ep0.state == ep0_state_token ||
+	    ep->ep0.state == ep0_state_stall) {
+		dev_warn(dev, "EP0: Request in wrong state\n");
+	        EPVDBG(ep, "EP0: list_empty=%d state=%d\n",
+		       list_empty(&ep->queue), ep->ep0.state);
+		spin_unlock_irqrestore(&vhub->lock, flags);
+		return -EBUSY;
+	}
+
+	/* Add request to list and kick processing if empty */
+	list_add_tail(&req->queue, &ep->queue);
+
+	if (ep->ep0.dir_in) {
+		/* IN request, send data */
+		ast_vhub_ep0_do_send(ep, req);
+	} else if (u_req->length == 0) {
+		/* 0-len request, send completion as rx */
+		EPVDBG(ep, "0-length rx completion\n");
+		ep->ep0.state = ep0_state_status;
+		writel(VHUB_EP0_TX_BUFF_RDY, ep->ep0.ctlstat);
+		ast_vhub_done(ep, req, 0);
+	} else {
+		/* OUT request, start receiver */
+		ast_vhub_ep0_rx_prime(ep);
+	}
+
+	spin_unlock_irqrestore(&vhub->lock, flags);
+
+	return 0;
+}
+
+static int ast_vhub_ep0_dequeue(struct usb_ep* u_ep, struct usb_request *u_req)
+{
+	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
+	struct ast_vhub *vhub = ep->vhub;
+	struct ast_vhub_req *req;
+	unsigned long flags;
+	int rc = -EINVAL;
+
+	spin_lock_irqsave(&vhub->lock, flags);
+
+	/* Only one request can be in the queue */
+	req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue);
+
+	/* Is it ours ? */
+	if (req && u_req == &req->req) {
+		EPVDBG(ep, "dequeue req @%p\n", req);
+
+		/*
+		 * We don't have to deal with "active" as all
+		 * DMAs go to the EP buffers, not the request.
+		 */
+		ast_vhub_done(ep, req, -ECONNRESET);
+
+		/* We do stall the EP to clean things up in HW */
+		writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat);
+		ep->ep0.state = ep0_state_status;
+		ep->ep0.dir_in = false;
+		rc = 0;
+	}
+	spin_unlock_irqrestore(&vhub->lock, flags);
+	return rc;
+}
+
+
+static const struct usb_ep_ops ast_vhub_ep0_ops = {
+	.queue		= ast_vhub_ep0_queue,
+	.dequeue	= ast_vhub_ep0_dequeue,
+	.alloc_request	= ast_vhub_alloc_request,
+	.free_request	= ast_vhub_free_request,
+};
+
+void ast_vhub_reset_ep0(struct ast_vhub_dev *dev)
+{
+	struct ast_vhub_ep *ep = &dev->ep0;
+
+	ast_vhub_nuke(ep, -EIO);
+	ep->ep0.state = ep0_state_token;
+}
+
+
+void ast_vhub_init_ep0(struct ast_vhub *vhub, struct ast_vhub_ep *ep,
+		       struct ast_vhub_dev *dev)
+{
+	memset(ep, 0, sizeof(*ep));
+
+	INIT_LIST_HEAD(&ep->ep.ep_list);
+	INIT_LIST_HEAD(&ep->queue);
+	ep->ep.ops = &ast_vhub_ep0_ops;
+	ep->ep.name = "ep0";
+	ep->ep.caps.type_control = true;
+	usb_ep_set_maxpacket_limit(&ep->ep, AST_VHUB_EP0_MAX_PACKET);
+	ep->d_idx = 0;
+	ep->dev = dev;
+	ep->vhub = vhub;
+	ep->ep0.state = ep0_state_token;
+	INIT_LIST_HEAD(&ep->ep0.req.queue);
+	ep->ep0.req.internal = true;
+
+	/* Small difference between vHub and devices */
+	if (dev) {
+		ep->ep0.ctlstat = dev->regs + AST_VHUB_DEV_EP0_CTRL;
+		ep->ep0.setup = vhub->regs +
+			AST_VHUB_SETUP0 + 8 * (dev->index + 1);
+		ep->buf = vhub->ep0_bufs +
+			AST_VHUB_EP0_MAX_PACKET * (dev->index + 1);
+		ep->buf_dma = vhub->ep0_bufs_dma +
+			AST_VHUB_EP0_MAX_PACKET * (dev->index + 1);
+	} else {
+		ep->ep0.ctlstat = vhub->regs + AST_VHUB_EP0_CTRL;
+		ep->ep0.setup = vhub->regs + AST_VHUB_SETUP0;
+		ep->buf = vhub->ep0_bufs;
+		ep->buf_dma = vhub->ep0_bufs_dma;
+	}
+}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
new file mode 100644
index 000000000..b5252880b
--- /dev/null
+++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
@@ -0,0 +1,847 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget
+ *
+ * epn.c - Generic endpoints management
+ *
+ * Copyright 2017 IBM Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/prefetch.h>
+#include <linux/clk.h>
+#include <linux/usb/gadget.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/dma-mapping.h>
+
+#include "vhub.h"
+
+#define EXTRA_CHECKS
+
+#ifdef EXTRA_CHECKS
+#define CHECK(ep, expr, fmt...)					\
+	do {							\
+		if (!(expr)) EPDBG(ep, "CHECK:" fmt);		\
+	} while(0)
+#else
+#define CHECK(ep, expr, fmt...)	do { } while(0)
+#endif
+
+static void ast_vhub_epn_kick(struct ast_vhub_ep *ep, struct ast_vhub_req *req)
+{
+	unsigned int act = req->req.actual;
+	unsigned int len = req->req.length;
+	unsigned int chunk;
+
+	/* There should be no DMA ongoing */
+	WARN_ON(req->active);
+
+	/* Calculate next chunk size */
+	chunk = len - act;
+	if (chunk > ep->ep.maxpacket)
+		chunk = ep->ep.maxpacket;
+	else if ((chunk < ep->ep.maxpacket) || !req->req.zero)
+		req->last_desc = 1;
+
+	EPVDBG(ep, "kick req %p act=%d/%d chunk=%d last=%d\n",
+	       req, act, len, chunk, req->last_desc);
+
+	/* If DMA unavailable, using staging EP buffer */
+	if (!req->req.dma) {
+
+		/* For IN transfers, copy data over first */
+		if (ep->epn.is_in) {
+			memcpy(ep->buf, req->req.buf + act, chunk);
+			vhub_dma_workaround(ep->buf);
+		}
+		writel(ep->buf_dma, ep->epn.regs + AST_VHUB_EP_DESC_BASE);
+	} else {
+		if (ep->epn.is_in)
+			vhub_dma_workaround(req->req.buf);
+		writel(req->req.dma + act, ep->epn.regs + AST_VHUB_EP_DESC_BASE);
+	}
+
+	/* Start DMA */
+	req->active = true;
+	writel(VHUB_EP_DMA_SET_TX_SIZE(chunk),
+	       ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
+	writel(VHUB_EP_DMA_SET_TX_SIZE(chunk) | VHUB_EP_DMA_SINGLE_KICK,
+	       ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
+}
+
+static void ast_vhub_epn_handle_ack(struct ast_vhub_ep *ep)
+{
+	struct ast_vhub_req *req;
+	unsigned int len;
+	u32 stat;
+
+	/* Read EP status */
+	stat = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
+
+	/* Grab current request if any */
+	req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue);
+
+	EPVDBG(ep, "ACK status=%08x is_in=%d, req=%p (active=%d)\n",
+	       stat, ep->epn.is_in, req, req ? req->active : 0);
+
+	/* In absence of a request, bail out, must have been dequeued */
+	if (!req)
+		return;
+
+	/*
+	 * Request not active, move on to processing queue, active request
+	 * was probably dequeued
+	 */
+	if (!req->active)
+		goto next_chunk;
+
+	/* Check if HW has moved on */
+	if (VHUB_EP_DMA_RPTR(stat) != 0) {
+		EPDBG(ep, "DMA read pointer not 0 !\n");
+		return;
+	}
+
+	/* No current DMA ongoing */
+	req->active = false;
+
+	/* Grab length out of HW */
+	len = VHUB_EP_DMA_TX_SIZE(stat);
+
+	/* If not using DMA, copy data out if needed */
+	if (!req->req.dma && !ep->epn.is_in && len)
+		memcpy(req->req.buf + req->req.actual, ep->buf, len);
+
+	/* Adjust size */
+	req->req.actual += len;
+
+	/* Check for short packet */
+	if (len < ep->ep.maxpacket)
+		req->last_desc = 1;
+
+	/* That's it ? complete the request and pick a new one */
+	if (req->last_desc >= 0) {
+		ast_vhub_done(ep, req, 0);
+		req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req,
+					       queue);
+
+		/*
+		 * Due to lock dropping inside "done" the next request could
+		 * already be active, so check for that and bail if needed.
+		 */
+		if (!req || req->active)
+			return;
+	}
+
+ next_chunk:
+	ast_vhub_epn_kick(ep, req);
+}
+
+static inline unsigned int ast_vhub_count_free_descs(struct ast_vhub_ep *ep)
+{
+	/*
+	 * d_next == d_last means descriptor list empty to HW,
+	 * thus we can only have AST_VHUB_DESCS_COUNT-1 descriptors
+	 * in the list
+	 */
+	return (ep->epn.d_last + AST_VHUB_DESCS_COUNT - ep->epn.d_next - 1) &
+		(AST_VHUB_DESCS_COUNT - 1);
+}
+
+static void ast_vhub_epn_kick_desc(struct ast_vhub_ep *ep,
+				   struct ast_vhub_req *req)
+{
+	struct ast_vhub_desc *desc = NULL;
+	unsigned int act = req->act_count;
+	unsigned int len = req->req.length;
+	unsigned int chunk;
+
+	/* Mark request active if not already */
+	req->active = true;
+
+	/* If the request was already completely written, do nothing */
+	if (req->last_desc >= 0)
+		return;
+
+	EPVDBG(ep, "kick act=%d/%d chunk_max=%d free_descs=%d\n",
+	       act, len, ep->epn.chunk_max, ast_vhub_count_free_descs(ep));
+
+	/* While we can create descriptors */
+	while (ast_vhub_count_free_descs(ep) && req->last_desc < 0) {
+		unsigned int d_num;
+
+		/* Grab next free descriptor */
+		d_num = ep->epn.d_next;
+		desc = &ep->epn.descs[d_num];
+		ep->epn.d_next = (d_num + 1) & (AST_VHUB_DESCS_COUNT - 1);
+
+		/* Calculate next chunk size */
+		chunk = len - act;
+		if (chunk <= ep->epn.chunk_max) {
+			/*
+			 * Is this the last packet ? Because of having up to 8
+			 * packets in a descriptor we can't just compare "chunk"
+			 * with ep.maxpacket. We have to see if it's a multiple
+			 * of it to know if we have to send a zero packet.
+			 * Sadly that involves a modulo which is a bit expensive
+			 * but probably still better than not doing it.
+			 */
+			if (!chunk || !req->req.zero || (chunk % ep->ep.maxpacket) != 0)
+				req->last_desc = d_num;
+		} else {
+			chunk = ep->epn.chunk_max;
+		}
+
+		EPVDBG(ep, " chunk: act=%d/%d chunk=%d last=%d desc=%d free=%d\n",
+		       act, len, chunk, req->last_desc, d_num,
+		       ast_vhub_count_free_descs(ep));
+
+		/* Populate descriptor */
+		desc->w0 = cpu_to_le32(req->req.dma + act);
+
+		/* Interrupt if end of request or no more descriptors */
+
+		/*
+		 * TODO: Be smarter about it, if we don't have enough
+		 * descriptors request an interrupt before queue empty
+		 * or so in order to be able to populate more before
+		 * the HW runs out. This isn't a problem at the moment
+		 * as we use 256 descriptors and only put at most one
+		 * request in the ring.
+		 */
+		desc->w1 = cpu_to_le32(VHUB_DSC1_IN_SET_LEN(chunk));
+		if (req->last_desc >= 0 || !ast_vhub_count_free_descs(ep))
+			desc->w1 |= cpu_to_le32(VHUB_DSC1_IN_INTERRUPT);
+
+		/* Account packet */
+		req->act_count = act = act + chunk;
+	}
+
+	if (likely(desc))
+		vhub_dma_workaround(desc);
+
+	/* Tell HW about new descriptors */
+	writel(VHUB_EP_DMA_SET_CPU_WPTR(ep->epn.d_next),
+	       ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
+
+	EPVDBG(ep, "HW kicked, d_next=%d dstat=%08x\n",
+	       ep->epn.d_next, readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS));
+}
+
+static void ast_vhub_epn_handle_ack_desc(struct ast_vhub_ep *ep)
+{
+	struct ast_vhub_req *req;
+	unsigned int len, d_last;
+	u32 stat, stat1;
+
+	/* Read EP status, workaround HW race */
+	do {
+		stat = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
+		stat1 = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
+	} while(stat != stat1);
+
+	/* Extract RPTR */
+	d_last = VHUB_EP_DMA_RPTR(stat);
+
+	/* Grab current request if any */
+	req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue);
+
+	EPVDBG(ep, "ACK status=%08x is_in=%d ep->d_last=%d..%d\n",
+	       stat, ep->epn.is_in, ep->epn.d_last, d_last);
+
+	/* Check all completed descriptors */
+	while (ep->epn.d_last != d_last) {
+		struct ast_vhub_desc *desc;
+		unsigned int d_num;
+		bool is_last_desc;
+
+		/* Grab next completed descriptor */
+		d_num = ep->epn.d_last;
+		desc = &ep->epn.descs[d_num];
+		ep->epn.d_last = (d_num + 1) & (AST_VHUB_DESCS_COUNT - 1);
+
+		/* Grab len out of descriptor */
+		len = VHUB_DSC1_IN_LEN(le32_to_cpu(desc->w1));
+
+		EPVDBG(ep, " desc %d len=%d req=%p (act=%d)\n",
+		       d_num, len, req, req ? req->active : 0);
+
+		/* If no active request pending, move on */
+		if (!req || !req->active)
+			continue;
+
+		/* Adjust size */
+		req->req.actual += len;
+
+		/* Is that the last chunk ? */
+		is_last_desc = req->last_desc == d_num;
+		CHECK(ep, is_last_desc == (len < ep->ep.maxpacket ||
+					   (req->req.actual >= req->req.length &&
+					    !req->req.zero)),
+		      "Last packet discrepancy: last_desc=%d len=%d r.act=%d "
+		      "r.len=%d r.zero=%d mp=%d\n",
+		      is_last_desc, len, req->req.actual, req->req.length,
+		      req->req.zero, ep->ep.maxpacket);
+
+		if (is_last_desc) {
+			/*
+			 * Because we can only have one request at a time
+			 * in our descriptor list in this implementation,
+			 * d_last and ep->d_last should now be equal
+			 */
+			CHECK(ep, d_last == ep->epn.d_last,
+			      "DMA read ptr mismatch %d vs %d\n",
+			      d_last, ep->epn.d_last);
+
+			/* Note: done will drop and re-acquire the lock */
+			ast_vhub_done(ep, req, 0);
+			req = list_first_entry_or_null(&ep->queue,
+						       struct ast_vhub_req,
+						       queue);
+			break;
+		}
+	}
+
+	/* More work ? */
+	if (req)
+		ast_vhub_epn_kick_desc(ep, req);
+}
+
+void ast_vhub_epn_ack_irq(struct ast_vhub_ep *ep)
+{
+	if (ep->epn.desc_mode)
+		ast_vhub_epn_handle_ack_desc(ep);
+	else
+		ast_vhub_epn_handle_ack(ep);
+}
+
+static int ast_vhub_epn_queue(struct usb_ep* u_ep, struct usb_request *u_req,
+			      gfp_t gfp_flags)
+{
+	struct ast_vhub_req *req = to_ast_req(u_req);
+	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
+	struct ast_vhub *vhub = ep->vhub;
+	unsigned long flags;
+	bool empty;
+	int rc;
+
+	/* Paranoid checks */
+	if (!u_req || !u_req->complete || !u_req->buf) {
+		dev_warn(&vhub->pdev->dev, "Bogus EPn request ! u_req=%p\n", u_req);
+		if (u_req) {
+			dev_warn(&vhub->pdev->dev, "complete=%p internal=%d\n",
+				 u_req->complete, req->internal);
+		}
+		return -EINVAL;
+	}
+
+	/* Endpoint enabled ? */
+	if (!ep->epn.enabled || !u_ep->desc || !ep->dev || !ep->d_idx ||
+	    !ep->dev->enabled) {
+		EPDBG(ep, "Enqueuing request on wrong or disabled EP\n");
+		return -ESHUTDOWN;
+	}
+
+	/* Map request for DMA if possible. For now, the rule for DMA is
+	 * that:
+	 *
+	 *  * For single stage mode (no descriptors):
+	 *
+	 *   - The buffer is aligned to a 8 bytes boundary (HW requirement)
+	 *   - For a OUT endpoint, the request size is a multiple of the EP
+	 *     packet size (otherwise the controller will DMA past the end
+	 *     of the buffer if the host is sending a too long packet).
+	 *
+	 *  * For descriptor mode (tx only for now), always.
+	 *
+	 * We could relax the latter by making the decision to use the bounce
+	 * buffer based on the size of a given *segment* of the request rather
+	 * than the whole request.
+	 */
+	if (ep->epn.desc_mode ||
+	    ((((unsigned long)u_req->buf & 7) == 0) &&
+	     (ep->epn.is_in || !(u_req->length & (u_ep->maxpacket - 1))))) {
+		rc = usb_gadget_map_request_by_dev(&vhub->pdev->dev, u_req,
+					    ep->epn.is_in);
+		if (rc) {
+			dev_warn(&vhub->pdev->dev,
+				 "Request mapping failure %d\n", rc);
+			return rc;
+		}
+	} else
+		u_req->dma = 0;
+
+	EPVDBG(ep, "enqueue req @%p\n", req);
+	EPVDBG(ep, " l=%d dma=0x%x zero=%d noshort=%d noirq=%d is_in=%d\n",
+	       u_req->length, (u32)u_req->dma, u_req->zero,
+	       u_req->short_not_ok, u_req->no_interrupt,
+	       ep->epn.is_in);
+
+	/* Initialize request progress fields */
+	u_req->status = -EINPROGRESS;
+	u_req->actual = 0;
+	req->act_count = 0;
+	req->active = false;
+	req->last_desc = -1;
+	spin_lock_irqsave(&vhub->lock, flags);
+	empty = list_empty(&ep->queue);
+
+	/* Add request to list and kick processing if empty */
+	list_add_tail(&req->queue, &ep->queue);
+	if (empty) {
+		if (ep->epn.desc_mode)
+			ast_vhub_epn_kick_desc(ep, req);
+		else
+			ast_vhub_epn_kick(ep, req);
+	}
+	spin_unlock_irqrestore(&vhub->lock, flags);
+
+	return 0;
+}
+
+static void ast_vhub_stop_active_req(struct ast_vhub_ep *ep,
+				     bool restart_ep)
+{
+	u32 state, reg, loops;
+
+	/* Stop DMA activity */
+	if (ep->epn.desc_mode)
+		writel(VHUB_EP_DMA_CTRL_RESET, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+	else
+		writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+
+	/* Wait for it to complete */
+	for (loops = 0; loops < 1000; loops++) {
+		state = readl(ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+		state = VHUB_EP_DMA_PROC_STATUS(state);
+		if (state == EP_DMA_PROC_RX_IDLE ||
+		    state == EP_DMA_PROC_TX_IDLE)
+			break;
+		udelay(1);
+	}
+	if (loops >= 1000)
+		dev_warn(&ep->vhub->pdev->dev, "Timeout waiting for DMA\n");
+
+	/* If we don't have to restart the endpoint, that's it */
+	if (!restart_ep)
+		return;
+
+	/* Restart the endpoint */
+	if (ep->epn.desc_mode) {
+		/*
+		 * Take out descriptors by resetting the DMA read
+		 * pointer to be equal to the CPU write pointer.
+		 *
+		 * Note: If we ever support creating descriptors for
+		 * requests that aren't the head of the queue, we
+		 * may have to do something more complex here,
+		 * especially if the request being taken out is
+		 * not the current head descriptors.
+		 */
+		reg = VHUB_EP_DMA_SET_RPTR(ep->epn.d_next) |
+			VHUB_EP_DMA_SET_CPU_WPTR(ep->epn.d_next);
+		writel(reg, ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
+
+		/* Then turn it back on */
+		writel(ep->epn.dma_conf,
+		       ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+	} else {
+		/* Single mode: just turn it back on */
+		writel(ep->epn.dma_conf,
+		       ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+	}
+}
+
+static int ast_vhub_epn_dequeue(struct usb_ep* u_ep, struct usb_request *u_req)
+{
+	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
+	struct ast_vhub *vhub = ep->vhub;
+	struct ast_vhub_req *req = NULL, *iter;
+	unsigned long flags;
+	int rc = -EINVAL;
+
+	spin_lock_irqsave(&vhub->lock, flags);
+
+	/* Make sure it's actually queued on this endpoint */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != u_req)
+			continue;
+		req = iter;
+		break;
+	}
+
+	if (req) {
+		EPVDBG(ep, "dequeue req @%p active=%d\n",
+		       req, req->active);
+		if (req->active)
+			ast_vhub_stop_active_req(ep, true);
+		ast_vhub_done(ep, req, -ECONNRESET);
+		rc = 0;
+	}
+
+	spin_unlock_irqrestore(&vhub->lock, flags);
+	return rc;
+}
+
+void ast_vhub_update_epn_stall(struct ast_vhub_ep *ep)
+{
+	u32 reg;
+
+	if (WARN_ON(ep->d_idx == 0))
+		return;
+	reg = readl(ep->epn.regs + AST_VHUB_EP_CONFIG);
+	if (ep->epn.stalled || ep->epn.wedged)
+		reg |= VHUB_EP_CFG_STALL_CTRL;
+	else
+		reg &= ~VHUB_EP_CFG_STALL_CTRL;
+	writel(reg, ep->epn.regs + AST_VHUB_EP_CONFIG);
+
+	if (!ep->epn.stalled && !ep->epn.wedged)
+		writel(VHUB_EP_TOGGLE_SET_EPNUM(ep->epn.g_idx),
+		       ep->vhub->regs + AST_VHUB_EP_TOGGLE);
+}
+
+static int ast_vhub_set_halt_and_wedge(struct usb_ep* u_ep, bool halt,
+				      bool wedge)
+{
+	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
+	struct ast_vhub *vhub = ep->vhub;
+	unsigned long flags;
+
+	EPDBG(ep, "Set halt (%d) & wedge (%d)\n", halt, wedge);
+
+	if (!u_ep || !u_ep->desc)
+		return -EINVAL;
+	if (ep->d_idx == 0)
+		return 0;
+	if (ep->epn.is_iso)
+		return -EOPNOTSUPP;
+
+	spin_lock_irqsave(&vhub->lock, flags);
+
+	/* Fail with still-busy IN endpoints */
+	if (halt && ep->epn.is_in && !list_empty(&ep->queue)) {
+		spin_unlock_irqrestore(&vhub->lock, flags);
+		return -EAGAIN;
+	}
+	ep->epn.stalled = halt;
+	ep->epn.wedged = wedge;
+	ast_vhub_update_epn_stall(ep);
+
+	spin_unlock_irqrestore(&vhub->lock, flags);
+
+	return 0;
+}
+
+static int ast_vhub_epn_set_halt(struct usb_ep *u_ep, int value)
+{
+	return ast_vhub_set_halt_and_wedge(u_ep, value != 0, false);
+}
+
+static int ast_vhub_epn_set_wedge(struct usb_ep *u_ep)
+{
+	return ast_vhub_set_halt_and_wedge(u_ep, true, true);
+}
+
+static int ast_vhub_epn_disable(struct usb_ep* u_ep)
+{
+	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
+	struct ast_vhub *vhub = ep->vhub;
+	unsigned long flags;
+	u32 imask, ep_ier;
+
+	EPDBG(ep, "Disabling !\n");
+
+	spin_lock_irqsave(&vhub->lock, flags);
+
+	ep->epn.enabled = false;
+
+	/* Stop active DMA if any */
+	ast_vhub_stop_active_req(ep, false);
+
+	/* Disable endpoint */
+	writel(0, ep->epn.regs + AST_VHUB_EP_CONFIG);
+
+	/* Disable ACK interrupt */
+	imask = VHUB_EP_IRQ(ep->epn.g_idx);
+	ep_ier = readl(vhub->regs + AST_VHUB_EP_ACK_IER);
+	ep_ier &= ~imask;
+	writel(ep_ier, vhub->regs + AST_VHUB_EP_ACK_IER);
+	writel(imask, vhub->regs + AST_VHUB_EP_ACK_ISR);
+
+	/* Nuke all pending requests */
+	ast_vhub_nuke(ep, -ESHUTDOWN);
+
+	/* No more descriptor associated with request */
+	ep->ep.desc = NULL;
+
+	spin_unlock_irqrestore(&vhub->lock, flags);
+
+	return 0;
+}
+
+static int ast_vhub_epn_enable(struct usb_ep* u_ep,
+			       const struct usb_endpoint_descriptor *desc)
+{
+	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
+	struct ast_vhub_dev *dev;
+	struct ast_vhub *vhub;
+	u16 maxpacket, type;
+	unsigned long flags;
+	u32 ep_conf, ep_ier, imask;
+
+	/* Check arguments */
+	if (!u_ep || !desc)
+		return -EINVAL;
+
+	maxpacket = usb_endpoint_maxp(desc);
+	if (!ep->d_idx || !ep->dev ||
+	    desc->bDescriptorType != USB_DT_ENDPOINT ||
+	    maxpacket == 0 || maxpacket > ep->ep.maxpacket) {
+		EPDBG(ep, "Invalid EP enable,d_idx=%d,dev=%p,type=%d,mp=%d/%d\n",
+		      ep->d_idx, ep->dev, desc->bDescriptorType,
+		      maxpacket, ep->ep.maxpacket);
+		return -EINVAL;
+	}
+	if (ep->d_idx != usb_endpoint_num(desc)) {
+		EPDBG(ep, "EP number mismatch !\n");
+		return -EINVAL;
+	}
+
+	if (ep->epn.enabled) {
+		EPDBG(ep, "Already enabled\n");
+		return -EBUSY;
+	}
+	dev = ep->dev;
+	vhub = ep->vhub;
+
+	/* Check device state */
+	if (!dev->driver) {
+		EPDBG(ep, "Bogus device state: driver=%p speed=%d\n",
+		       dev->driver, dev->gadget.speed);
+		return -ESHUTDOWN;
+	}
+
+	/* Grab some info from the descriptor */
+	ep->epn.is_in = usb_endpoint_dir_in(desc);
+	ep->ep.maxpacket = maxpacket;
+	type = usb_endpoint_type(desc);
+	ep->epn.d_next = ep->epn.d_last = 0;
+	ep->epn.is_iso = false;
+	ep->epn.stalled = false;
+	ep->epn.wedged = false;
+
+	EPDBG(ep, "Enabling [%s] %s num %d maxpacket=%d\n",
+	      ep->epn.is_in ? "in" : "out", usb_ep_type_string(type),
+	      usb_endpoint_num(desc), maxpacket);
+
+	/* Can we use DMA descriptor mode ? */
+	ep->epn.desc_mode = ep->epn.descs && ep->epn.is_in;
+	if (ep->epn.desc_mode)
+		memset(ep->epn.descs, 0, 8 * AST_VHUB_DESCS_COUNT);
+
+	/*
+	 * Large send function can send up to 8 packets from
+	 * one descriptor with a limit of 4095 bytes.
+	 */
+	ep->epn.chunk_max = ep->ep.maxpacket;
+	if (ep->epn.is_in) {
+		ep->epn.chunk_max <<= 3;
+		while (ep->epn.chunk_max > 4095)
+			ep->epn.chunk_max -= ep->ep.maxpacket;
+	}
+
+	switch(type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		EPDBG(ep, "Only one control endpoint\n");
+		return -EINVAL;
+	case USB_ENDPOINT_XFER_INT:
+		ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_INT);
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_BULK);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_ISO);
+		ep->epn.is_iso = true;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Encode the rest of the EP config register */
+	if (maxpacket < 1024)
+		ep_conf |= VHUB_EP_CFG_SET_MAX_PKT(maxpacket);
+	if (!ep->epn.is_in)
+		ep_conf |= VHUB_EP_CFG_DIR_OUT;
+	ep_conf |= VHUB_EP_CFG_SET_EP_NUM(usb_endpoint_num(desc));
+	ep_conf |= VHUB_EP_CFG_ENABLE;
+	ep_conf |= VHUB_EP_CFG_SET_DEV(dev->index + 1);
+	EPVDBG(ep, "config=%08x\n", ep_conf);
+
+	spin_lock_irqsave(&vhub->lock, flags);
+
+	/* Disable HW and reset DMA */
+	writel(0, ep->epn.regs + AST_VHUB_EP_CONFIG);
+	writel(VHUB_EP_DMA_CTRL_RESET,
+	       ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+
+	/* Configure and enable */
+	writel(ep_conf, ep->epn.regs + AST_VHUB_EP_CONFIG);
+
+	if (ep->epn.desc_mode) {
+		/* Clear DMA status, including the DMA read ptr */
+		writel(0, ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
+
+		/* Set descriptor base */
+		writel(ep->epn.descs_dma,
+		       ep->epn.regs + AST_VHUB_EP_DESC_BASE);
+
+		/* Set base DMA config value */
+		ep->epn.dma_conf = VHUB_EP_DMA_DESC_MODE;
+		if (ep->epn.is_in)
+			ep->epn.dma_conf |= VHUB_EP_DMA_IN_LONG_MODE;
+
+		/* First reset and disable all operations */
+		writel(ep->epn.dma_conf | VHUB_EP_DMA_CTRL_RESET,
+		       ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+
+		/* Enable descriptor mode */
+		writel(ep->epn.dma_conf,
+		       ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+	} else {
+		/* Set base DMA config value */
+		ep->epn.dma_conf = VHUB_EP_DMA_SINGLE_STAGE;
+
+		/* Reset and switch to single stage mode */
+		writel(ep->epn.dma_conf | VHUB_EP_DMA_CTRL_RESET,
+		       ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+		writel(ep->epn.dma_conf,
+		       ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+		writel(0, ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
+	}
+
+	/* Cleanup data toggle just in case */
+	writel(VHUB_EP_TOGGLE_SET_EPNUM(ep->epn.g_idx),
+	       vhub->regs + AST_VHUB_EP_TOGGLE);
+
+	/* Cleanup and enable ACK interrupt */
+	imask = VHUB_EP_IRQ(ep->epn.g_idx);
+	writel(imask, vhub->regs + AST_VHUB_EP_ACK_ISR);
+	ep_ier = readl(vhub->regs + AST_VHUB_EP_ACK_IER);
+	ep_ier |= imask;
+	writel(ep_ier, vhub->regs + AST_VHUB_EP_ACK_IER);
+
+	/* Woot, we are online ! */
+	ep->epn.enabled = true;
+
+	spin_unlock_irqrestore(&vhub->lock, flags);
+
+	return 0;
+}
+
+static void ast_vhub_epn_dispose(struct usb_ep *u_ep)
+{
+	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
+
+	if (WARN_ON(!ep->dev || !ep->d_idx))
+		return;
+
+	EPDBG(ep, "Releasing endpoint\n");
+
+	/* Take it out of the EP list */
+	list_del_init(&ep->ep.ep_list);
+
+	/* Mark the address free in the device */
+	ep->dev->epns[ep->d_idx - 1] = NULL;
+
+	/* Free name & DMA buffers */
+	kfree(ep->ep.name);
+	ep->ep.name = NULL;
+	dma_free_coherent(&ep->vhub->pdev->dev,
+			  AST_VHUB_EPn_MAX_PACKET +
+			  8 * AST_VHUB_DESCS_COUNT,
+			  ep->buf, ep->buf_dma);
+	ep->buf = NULL;
+	ep->epn.descs = NULL;
+
+	/* Mark free */
+	ep->dev = NULL;
+}
+
+static const struct usb_ep_ops ast_vhub_epn_ops = {
+	.enable		= ast_vhub_epn_enable,
+	.disable	= ast_vhub_epn_disable,
+	.dispose	= ast_vhub_epn_dispose,
+	.queue		= ast_vhub_epn_queue,
+	.dequeue	= ast_vhub_epn_dequeue,
+	.set_halt	= ast_vhub_epn_set_halt,
+	.set_wedge	= ast_vhub_epn_set_wedge,
+	.alloc_request	= ast_vhub_alloc_request,
+	.free_request	= ast_vhub_free_request,
+};
+
+struct ast_vhub_ep *ast_vhub_alloc_epn(struct ast_vhub_dev *d, u8 addr)
+{
+	struct ast_vhub *vhub = d->vhub;
+	struct ast_vhub_ep *ep;
+	unsigned long flags;
+	int i;
+
+	/* Find a free one (no device) */
+	spin_lock_irqsave(&vhub->lock, flags);
+	for (i = 0; i < vhub->max_epns; i++)
+		if (vhub->epns[i].dev == NULL)
+			break;
+	if (i >= vhub->max_epns) {
+		spin_unlock_irqrestore(&vhub->lock, flags);
+		return NULL;
+	}
+
+	/* Set it up */
+	ep = &vhub->epns[i];
+	ep->dev = d;
+	spin_unlock_irqrestore(&vhub->lock, flags);
+
+	DDBG(d, "Allocating gen EP %d for addr %d\n", i, addr);
+	INIT_LIST_HEAD(&ep->queue);
+	ep->d_idx = addr;
+	ep->vhub = vhub;
+	ep->ep.ops = &ast_vhub_epn_ops;
+	ep->ep.name = kasprintf(GFP_KERNEL, "ep%d", addr);
+	d->epns[addr-1] = ep;
+	ep->epn.g_idx = i;
+	ep->epn.regs = vhub->regs + 0x200 + (i * 0x10);
+
+	ep->buf = dma_alloc_coherent(&vhub->pdev->dev,
+				     AST_VHUB_EPn_MAX_PACKET +
+				     8 * AST_VHUB_DESCS_COUNT,
+				     &ep->buf_dma, GFP_KERNEL);
+	if (!ep->buf) {
+		kfree(ep->ep.name);
+		ep->ep.name = NULL;
+		return NULL;
+	}
+	ep->epn.descs = ep->buf + AST_VHUB_EPn_MAX_PACKET;
+	ep->epn.descs_dma = ep->buf_dma + AST_VHUB_EPn_MAX_PACKET;
+
+	usb_ep_set_maxpacket_limit(&ep->ep, AST_VHUB_EPn_MAX_PACKET);
+	list_add_tail(&ep->ep.ep_list, &d->gadget.ep_list);
+	ep->ep.caps.type_iso = true;
+	ep->ep.caps.type_bulk = true;
+	ep->ep.caps.type_int = true;
+	ep->ep.caps.dir_in = true;
+	ep->ep.caps.dir_out = true;
+
+	return ep;
+}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
new file mode 100644
index 000000000..e2207d014
--- /dev/null
+++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
@@ -0,0 +1,1082 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget
+ *
+ * hub.c - virtual hub handling
+ *
+ * Copyright 2017 IBM Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/prefetch.h>
+#include <linux/clk.h>
+#include <linux/usb/gadget.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/dma-mapping.h>
+#include <linux/bcd.h>
+#include <linux/version.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "vhub.h"
+
+/* usb 2.0 hub device descriptor
+ *
+ * A few things we may want to improve here:
+ *
+ *    - We may need to indicate TT support
+ *    - We may need a device qualifier descriptor
+ *	as devices can pretend to be usb1 or 2
+ *    - Make vid/did overridable
+ *    - make it look like usb1 if usb1 mode forced
+ */
+#define KERNEL_REL	bin2bcd(LINUX_VERSION_MAJOR)
+#define KERNEL_VER	bin2bcd(LINUX_VERSION_PATCHLEVEL)
+
+enum {
+	AST_VHUB_STR_INDEX_MAX = 4,
+	AST_VHUB_STR_MANUF = 3,
+	AST_VHUB_STR_PRODUCT = 2,
+	AST_VHUB_STR_SERIAL = 1,
+};
+
+static const struct usb_device_descriptor ast_vhub_dev_desc = {
+	.bLength		= USB_DT_DEVICE_SIZE,
+	.bDescriptorType	= USB_DT_DEVICE,
+	.bcdUSB			= cpu_to_le16(0x0200),
+	.bDeviceClass		= USB_CLASS_HUB,
+	.bDeviceSubClass	= 0,
+	.bDeviceProtocol	= 1,
+	.bMaxPacketSize0	= 64,
+	.idVendor		= cpu_to_le16(0x1d6b),
+	.idProduct		= cpu_to_le16(0x0107),
+	.bcdDevice		= cpu_to_le16(0x0100),
+	.iManufacturer		= AST_VHUB_STR_MANUF,
+	.iProduct		= AST_VHUB_STR_PRODUCT,
+	.iSerialNumber		= AST_VHUB_STR_SERIAL,
+	.bNumConfigurations	= 1,
+};
+
+static const struct usb_qualifier_descriptor ast_vhub_qual_desc = {
+	.bLength = 0xA,
+	.bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+	.bcdUSB = cpu_to_le16(0x0200),
+	.bDeviceClass = USB_CLASS_HUB,
+	.bDeviceSubClass = 0,
+	.bDeviceProtocol = 0,
+	.bMaxPacketSize0 = 64,
+	.bNumConfigurations = 1,
+	.bRESERVED = 0,
+};
+
+/*
+ * Configuration descriptor: same comments as above
+ * regarding handling USB1 mode.
+ */
+
+/*
+ * We don't use sizeof() as Linux definition of
+ * struct usb_endpoint_descriptor contains 2
+ * extra bytes
+ */
+#define AST_VHUB_CONF_DESC_SIZE	(USB_DT_CONFIG_SIZE + \
+				 USB_DT_INTERFACE_SIZE + \
+				 USB_DT_ENDPOINT_SIZE)
+
+static const struct ast_vhub_full_cdesc ast_vhub_conf_desc = {
+	.cfg = {
+		.bLength		= USB_DT_CONFIG_SIZE,
+		.bDescriptorType	= USB_DT_CONFIG,
+		.wTotalLength		= cpu_to_le16(AST_VHUB_CONF_DESC_SIZE),
+		.bNumInterfaces		= 1,
+		.bConfigurationValue	= 1,
+		.iConfiguration		= 0,
+		.bmAttributes		= USB_CONFIG_ATT_ONE |
+					  USB_CONFIG_ATT_SELFPOWER |
+					  USB_CONFIG_ATT_WAKEUP,
+		.bMaxPower		= 0,
+	},
+	.intf = {
+		.bLength		= USB_DT_INTERFACE_SIZE,
+		.bDescriptorType	= USB_DT_INTERFACE,
+		.bInterfaceNumber	= 0,
+		.bAlternateSetting	= 0,
+		.bNumEndpoints		= 1,
+		.bInterfaceClass	= USB_CLASS_HUB,
+		.bInterfaceSubClass	= 0,
+		.bInterfaceProtocol	= 0,
+		.iInterface		= 0,
+	},
+	.ep = {
+		.bLength		= USB_DT_ENDPOINT_SIZE,
+		.bDescriptorType	= USB_DT_ENDPOINT,
+		.bEndpointAddress	= 0x81,
+		.bmAttributes		= USB_ENDPOINT_XFER_INT,
+		.wMaxPacketSize		= cpu_to_le16(1),
+		.bInterval		= 0x0c,
+	},
+};
+
+#define AST_VHUB_HUB_DESC_SIZE	(USB_DT_HUB_NONVAR_SIZE + 2)
+
+static const struct usb_hub_descriptor ast_vhub_hub_desc = {
+	.bDescLength			= AST_VHUB_HUB_DESC_SIZE,
+	.bDescriptorType		= USB_DT_HUB,
+	.bNbrPorts			= AST_VHUB_NUM_PORTS,
+	.wHubCharacteristics		= cpu_to_le16(HUB_CHAR_NO_LPSM),
+	.bPwrOn2PwrGood			= 10,
+	.bHubContrCurrent		= 0,
+	.u.hs.DeviceRemovable[0]	= 0,
+	.u.hs.DeviceRemovable[1]	= 0xff,
+};
+
+/*
+ * These strings converted to UTF-16 must be smaller than
+ * our EP0 buffer.
+ */
+static const struct usb_string ast_vhub_str_array[] = {
+	{
+		.id = AST_VHUB_STR_SERIAL,
+		.s = "00000000"
+	},
+	{
+		.id = AST_VHUB_STR_PRODUCT,
+		.s = "USB Virtual Hub"
+	},
+	{
+		.id = AST_VHUB_STR_MANUF,
+		.s = "Aspeed"
+	},
+	{ }
+};
+
+static const struct usb_gadget_strings ast_vhub_strings = {
+	.language = 0x0409,
+	.strings = (struct usb_string *)ast_vhub_str_array
+};
+
+static int ast_vhub_hub_dev_status(struct ast_vhub_ep *ep,
+				   u16 wIndex, u16 wValue)
+{
+	u8 st0;
+
+	EPDBG(ep, "GET_STATUS(dev)\n");
+
+	/*
+	 * Mark it as self-powered, I doubt the BMC is powered off
+	 * the USB bus ...
+	 */
+	st0 = 1 << USB_DEVICE_SELF_POWERED;
+
+	/*
+	 * Need to double check how remote wakeup actually works
+	 * on that chip and what triggers it.
+	 */
+	if (ep->vhub->wakeup_en)
+		st0 |= 1 << USB_DEVICE_REMOTE_WAKEUP;
+
+	return ast_vhub_simple_reply(ep, st0, 0);
+}
+
+static int ast_vhub_hub_ep_status(struct ast_vhub_ep *ep,
+				  u16 wIndex, u16 wValue)
+{
+	int ep_num;
+	u8 st0 = 0;
+
+	ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK;
+	EPDBG(ep, "GET_STATUS(ep%d)\n", ep_num);
+
+	/* On the hub we have only EP 0 and 1 */
+	if (ep_num == 1) {
+		if (ep->vhub->ep1_stalled)
+			st0 |= 1 << USB_ENDPOINT_HALT;
+	} else if (ep_num != 0)
+		return std_req_stall;
+
+	return ast_vhub_simple_reply(ep, st0, 0);
+}
+
+static int ast_vhub_hub_dev_feature(struct ast_vhub_ep *ep,
+				    u16 wIndex, u16 wValue,
+				    bool is_set)
+{
+	u32 val;
+
+	EPDBG(ep, "%s_FEATURE(dev val=%02x)\n",
+	      is_set ? "SET" : "CLEAR", wValue);
+
+	if (wValue == USB_DEVICE_REMOTE_WAKEUP) {
+		ep->vhub->wakeup_en = is_set;
+		EPDBG(ep, "Hub remote wakeup %s\n",
+		      is_set ? "enabled" : "disabled");
+		return std_req_complete;
+	}
+
+	if (wValue == USB_DEVICE_TEST_MODE) {
+		val = readl(ep->vhub->regs + AST_VHUB_CTRL);
+		val &= ~GENMASK(10, 8);
+		val |= VHUB_CTRL_SET_TEST_MODE((wIndex >> 8) & 0x7);
+		writel(val, ep->vhub->regs + AST_VHUB_CTRL);
+
+		return std_req_complete;
+	}
+
+	return std_req_stall;
+}
+
+static int ast_vhub_hub_ep_feature(struct ast_vhub_ep *ep,
+				   u16 wIndex, u16 wValue,
+				   bool is_set)
+{
+	int ep_num;
+	u32 reg;
+
+	ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK;
+	EPDBG(ep, "%s_FEATURE(ep%d val=%02x)\n",
+	      is_set ? "SET" : "CLEAR", ep_num, wValue);
+
+	if (ep_num > 1)
+		return std_req_stall;
+	if (wValue != USB_ENDPOINT_HALT)
+		return std_req_stall;
+	if (ep_num == 0)
+		return std_req_complete;
+
+	EPDBG(ep, "%s stall on EP 1\n",
+	      is_set ? "setting" : "clearing");
+
+	ep->vhub->ep1_stalled = is_set;
+	reg = readl(ep->vhub->regs + AST_VHUB_EP1_CTRL);
+	if (is_set) {
+		reg |= VHUB_EP1_CTRL_STALL;
+	} else {
+		reg &= ~VHUB_EP1_CTRL_STALL;
+		reg |= VHUB_EP1_CTRL_RESET_TOGGLE;
+	}
+	writel(reg, ep->vhub->regs + AST_VHUB_EP1_CTRL);
+
+	return std_req_complete;
+}
+
+static int ast_vhub_rep_desc(struct ast_vhub_ep *ep,
+			     u8 desc_type, u16 len)
+{
+	size_t dsize;
+	struct ast_vhub *vhub = ep->vhub;
+
+	EPDBG(ep, "GET_DESCRIPTOR(type:%d)\n", desc_type);
+
+	/*
+	 * Copy first to EP buffer and send from there, so
+	 * we can do some in-place patching if needed. We know
+	 * the EP buffer is big enough but ensure that doesn't
+	 * change. We do that now rather than later after we
+	 * have checked sizes etc... to avoid a gcc bug where
+	 * it thinks len is constant and barfs about read
+	 * overflows in memcpy.
+	 */
+	switch(desc_type) {
+	case USB_DT_DEVICE:
+		dsize = USB_DT_DEVICE_SIZE;
+		memcpy(ep->buf, &vhub->vhub_dev_desc, dsize);
+		BUILD_BUG_ON(dsize > sizeof(vhub->vhub_dev_desc));
+		BUILD_BUG_ON(USB_DT_DEVICE_SIZE >= AST_VHUB_EP0_MAX_PACKET);
+		break;
+	case USB_DT_OTHER_SPEED_CONFIG:
+	case USB_DT_CONFIG:
+		dsize = AST_VHUB_CONF_DESC_SIZE;
+		memcpy(ep->buf, &vhub->vhub_conf_desc, dsize);
+		((u8 *)ep->buf)[1] = desc_type;
+		BUILD_BUG_ON(dsize > sizeof(vhub->vhub_conf_desc));
+		BUILD_BUG_ON(AST_VHUB_CONF_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET);
+		break;
+	case USB_DT_HUB:
+		dsize = AST_VHUB_HUB_DESC_SIZE;
+		memcpy(ep->buf, &vhub->vhub_hub_desc, dsize);
+		BUILD_BUG_ON(dsize > sizeof(vhub->vhub_hub_desc));
+		BUILD_BUG_ON(AST_VHUB_HUB_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET);
+		break;
+	case USB_DT_DEVICE_QUALIFIER:
+		dsize = sizeof(vhub->vhub_qual_desc);
+		memcpy(ep->buf, &vhub->vhub_qual_desc, dsize);
+		break;
+	default:
+		return std_req_stall;
+	}
+
+	/* Crop requested length */
+	if (len > dsize)
+		len = dsize;
+
+	/* Shoot it from the EP buffer */
+	return ast_vhub_reply(ep, NULL, len);
+}
+
+static struct usb_gadget_strings*
+ast_vhub_str_of_container(struct usb_gadget_string_container *container)
+{
+	return (struct usb_gadget_strings *)container->stash;
+}
+
+static int ast_vhub_collect_languages(struct ast_vhub *vhub, void *buf,
+				      size_t size)
+{
+	int rc, hdr_len, nlangs, max_langs;
+	struct usb_gadget_strings *lang_str;
+	struct usb_gadget_string_container *container;
+	struct usb_string_descriptor *sdesc = buf;
+
+	nlangs = 0;
+	hdr_len = sizeof(struct usb_descriptor_header);
+	max_langs = (size - hdr_len) / sizeof(sdesc->wData[0]);
+	list_for_each_entry(container, &vhub->vhub_str_desc, list) {
+		if (nlangs >= max_langs)
+			break;
+
+		lang_str = ast_vhub_str_of_container(container);
+		sdesc->wData[nlangs++] = cpu_to_le16(lang_str->language);
+	}
+
+	rc = hdr_len + nlangs * sizeof(sdesc->wData[0]);
+	sdesc->bLength = rc;
+	sdesc->bDescriptorType = USB_DT_STRING;
+
+	return rc;
+}
+
+static struct usb_gadget_strings *ast_vhub_lookup_string(struct ast_vhub *vhub,
+							 u16 lang_id)
+{
+	struct usb_gadget_strings *lang_str;
+	struct usb_gadget_string_container *container;
+
+	list_for_each_entry(container, &vhub->vhub_str_desc, list) {
+		lang_str = ast_vhub_str_of_container(container);
+		if (lang_str->language == lang_id)
+			return lang_str;
+	}
+
+	return NULL;
+}
+
+static int ast_vhub_rep_string(struct ast_vhub_ep *ep,
+			       u8 string_id, u16 lang_id,
+			       u16 len)
+{
+	int rc;
+	u8 buf[256];
+	struct ast_vhub *vhub = ep->vhub;
+	struct usb_gadget_strings *lang_str;
+
+	if (string_id == 0) {
+		rc = ast_vhub_collect_languages(vhub, buf, sizeof(buf));
+	} else {
+		lang_str = ast_vhub_lookup_string(vhub, lang_id);
+		if (!lang_str)
+			return std_req_stall;
+
+		rc = usb_gadget_get_string(lang_str, string_id, buf);
+	}
+
+	if (rc < 0 || rc >= AST_VHUB_EP0_MAX_PACKET)
+		return std_req_stall;
+
+	/* Shoot it from the EP buffer */
+	memcpy(ep->buf, buf, rc);
+	return ast_vhub_reply(ep, NULL, min_t(u16, rc, len));
+}
+
+enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep,
+					 struct usb_ctrlrequest *crq)
+{
+	struct ast_vhub *vhub = ep->vhub;
+	u16 wValue, wIndex, wLength;
+
+	wValue = le16_to_cpu(crq->wValue);
+	wIndex = le16_to_cpu(crq->wIndex);
+	wLength = le16_to_cpu(crq->wLength);
+
+	/* First packet, grab speed */
+	if (vhub->speed == USB_SPEED_UNKNOWN) {
+		u32 ustat = readl(vhub->regs + AST_VHUB_USBSTS);
+		if (ustat & VHUB_USBSTS_HISPEED)
+			vhub->speed = USB_SPEED_HIGH;
+		else
+			vhub->speed = USB_SPEED_FULL;
+		UDCDBG(vhub, "USB status=%08x speed=%s\n", ustat,
+		       vhub->speed == USB_SPEED_HIGH ? "high" : "full");
+	}
+
+	switch ((crq->bRequestType << 8) | crq->bRequest) {
+		/* SET_ADDRESS */
+	case DeviceOutRequest | USB_REQ_SET_ADDRESS:
+		EPDBG(ep, "SET_ADDRESS: Got address %x\n", wValue);
+		writel(wValue, vhub->regs + AST_VHUB_CONF);
+		return std_req_complete;
+
+		/* GET_STATUS */
+	case DeviceRequest | USB_REQ_GET_STATUS:
+		return ast_vhub_hub_dev_status(ep, wIndex, wValue);
+	case InterfaceRequest | USB_REQ_GET_STATUS:
+		return ast_vhub_simple_reply(ep, 0, 0);
+	case EndpointRequest | USB_REQ_GET_STATUS:
+		return ast_vhub_hub_ep_status(ep, wIndex, wValue);
+
+		/* SET/CLEAR_FEATURE */
+	case DeviceOutRequest | USB_REQ_SET_FEATURE:
+		return ast_vhub_hub_dev_feature(ep, wIndex, wValue, true);
+	case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
+		return ast_vhub_hub_dev_feature(ep, wIndex, wValue, false);
+	case EndpointOutRequest | USB_REQ_SET_FEATURE:
+		return ast_vhub_hub_ep_feature(ep, wIndex, wValue, true);
+	case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
+		return ast_vhub_hub_ep_feature(ep, wIndex, wValue, false);
+
+		/* GET/SET_CONFIGURATION */
+	case DeviceRequest | USB_REQ_GET_CONFIGURATION:
+		return ast_vhub_simple_reply(ep, 1);
+	case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
+		if (wValue != 1)
+			return std_req_stall;
+		return std_req_complete;
+
+		/* GET_DESCRIPTOR */
+	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+		switch (wValue >> 8) {
+		case USB_DT_DEVICE:
+		case USB_DT_CONFIG:
+		case USB_DT_DEVICE_QUALIFIER:
+		case USB_DT_OTHER_SPEED_CONFIG:
+			return ast_vhub_rep_desc(ep, wValue >> 8,
+						 wLength);
+		case USB_DT_STRING:
+			return ast_vhub_rep_string(ep, wValue & 0xff,
+						   wIndex, wLength);
+		}
+		return std_req_stall;
+
+		/* GET/SET_INTERFACE */
+	case DeviceRequest | USB_REQ_GET_INTERFACE:
+		return ast_vhub_simple_reply(ep, 0);
+	case DeviceOutRequest | USB_REQ_SET_INTERFACE:
+		if (wValue != 0 || wIndex != 0)
+			return std_req_stall;
+		return std_req_complete;
+	}
+	return std_req_stall;
+}
+
+static void ast_vhub_update_hub_ep1(struct ast_vhub *vhub,
+				    unsigned int port)
+{
+	/* Update HW EP1 response */
+	u32 reg = readl(vhub->regs + AST_VHUB_EP1_STS_CHG);
+	u32 pmask = (1 << (port + 1));
+	if (vhub->ports[port].change)
+		reg |= pmask;
+	else
+		reg &= ~pmask;
+	writel(reg, vhub->regs + AST_VHUB_EP1_STS_CHG);
+}
+
+static void ast_vhub_change_port_stat(struct ast_vhub *vhub,
+				      unsigned int port,
+				      u16 clr_flags,
+				      u16 set_flags,
+				      bool set_c)
+{
+	struct ast_vhub_port *p = &vhub->ports[port];
+	u16 prev;
+
+	/* Update port status */
+	prev = p->status;
+	p->status = (prev & ~clr_flags) | set_flags;
+	DDBG(&p->dev, "port %d status %04x -> %04x (C=%d)\n",
+	     port + 1, prev, p->status, set_c);
+
+	/* Update change bits if needed */
+	if (set_c) {
+		u16 chg = p->status ^ prev;
+
+		/* Only these are relevant for change */
+		chg &= USB_PORT_STAT_C_CONNECTION |
+		       USB_PORT_STAT_C_ENABLE |
+		       USB_PORT_STAT_C_SUSPEND |
+		       USB_PORT_STAT_C_OVERCURRENT |
+		       USB_PORT_STAT_C_RESET |
+		       USB_PORT_STAT_C_L1;
+
+		/*
+		 * We only set USB_PORT_STAT_C_ENABLE if we are disabling
+		 * the port as per USB spec, otherwise MacOS gets upset
+		 */
+		if (p->status & USB_PORT_STAT_ENABLE)
+			chg &= ~USB_PORT_STAT_C_ENABLE;
+
+		p->change = chg;
+		ast_vhub_update_hub_ep1(vhub, port);
+	}
+}
+
+static void ast_vhub_send_host_wakeup(struct ast_vhub *vhub)
+{
+	u32 reg = readl(vhub->regs + AST_VHUB_CTRL);
+	UDCDBG(vhub, "Waking up host !\n");
+	reg |= VHUB_CTRL_MANUAL_REMOTE_WAKEUP;
+	writel(reg, vhub->regs + AST_VHUB_CTRL);
+}
+
+void ast_vhub_device_connect(struct ast_vhub *vhub,
+			     unsigned int port, bool on)
+{
+	if (on)
+		ast_vhub_change_port_stat(vhub, port, 0,
+					  USB_PORT_STAT_CONNECTION, true);
+	else
+		ast_vhub_change_port_stat(vhub, port,
+					  USB_PORT_STAT_CONNECTION |
+					  USB_PORT_STAT_ENABLE,
+					  0, true);
+
+	/*
+	 * If the hub is set to wakup the host on connection events
+	 * then send a wakeup.
+	 */
+	if (vhub->wakeup_en)
+		ast_vhub_send_host_wakeup(vhub);
+}
+
+static void ast_vhub_wake_work(struct work_struct *work)
+{
+	struct ast_vhub *vhub = container_of(work,
+					     struct ast_vhub,
+					     wake_work);
+	unsigned long flags;
+	unsigned int i;
+
+	/*
+	 * Wake all sleeping ports. If a port is suspended by
+	 * the host suspend (without explicit state suspend),
+	 * we let the normal host wake path deal with it later.
+	 */
+	spin_lock_irqsave(&vhub->lock, flags);
+	for (i = 0; i < vhub->max_ports; i++) {
+		struct ast_vhub_port *p = &vhub->ports[i];
+
+		if (!(p->status & USB_PORT_STAT_SUSPEND))
+			continue;
+		ast_vhub_change_port_stat(vhub, i,
+					  USB_PORT_STAT_SUSPEND,
+					  0, true);
+		ast_vhub_dev_resume(&p->dev);
+	}
+	ast_vhub_send_host_wakeup(vhub);
+	spin_unlock_irqrestore(&vhub->lock, flags);
+}
+
+void ast_vhub_hub_wake_all(struct ast_vhub *vhub)
+{
+	/*
+	 * A device is trying to wake the world, because this
+	 * can recurse into the device, we break the call chain
+	 * using a work queue
+	 */
+	schedule_work(&vhub->wake_work);
+}
+
+static void ast_vhub_port_reset(struct ast_vhub *vhub, u8 port)
+{
+	struct ast_vhub_port *p = &vhub->ports[port];
+	u16 set, clr, speed;
+
+	/* First mark disabled */
+	ast_vhub_change_port_stat(vhub, port,
+				  USB_PORT_STAT_ENABLE |
+				  USB_PORT_STAT_SUSPEND,
+				  USB_PORT_STAT_RESET,
+				  false);
+
+	if (!p->dev.driver)
+		return;
+
+	/*
+	 * This will either "start" the port or reset the
+	 * device if already started...
+	 */
+	ast_vhub_dev_reset(&p->dev);
+
+	/* Grab the right speed */
+	speed = p->dev.driver->max_speed;
+	if (speed == USB_SPEED_UNKNOWN || speed > vhub->speed)
+		speed = vhub->speed;
+
+	switch (speed) {
+	case USB_SPEED_LOW:
+		set = USB_PORT_STAT_LOW_SPEED;
+		clr = USB_PORT_STAT_HIGH_SPEED;
+		break;
+	case USB_SPEED_FULL:
+		set = 0;
+		clr = USB_PORT_STAT_LOW_SPEED |
+			USB_PORT_STAT_HIGH_SPEED;
+		break;
+	case USB_SPEED_HIGH:
+		set = USB_PORT_STAT_HIGH_SPEED;
+		clr = USB_PORT_STAT_LOW_SPEED;
+		break;
+	default:
+		UDCDBG(vhub, "Unsupported speed %d when"
+		       " connecting device\n",
+		       speed);
+		return;
+	}
+	clr |= USB_PORT_STAT_RESET;
+	set |= USB_PORT_STAT_ENABLE;
+
+	/* This should ideally be delayed ... */
+	ast_vhub_change_port_stat(vhub, port, clr, set, true);
+}
+
+static enum std_req_rc ast_vhub_set_port_feature(struct ast_vhub_ep *ep,
+						 u8 port, u16 feat)
+{
+	struct ast_vhub *vhub = ep->vhub;
+	struct ast_vhub_port *p;
+
+	if (port == 0 || port > vhub->max_ports)
+		return std_req_stall;
+	port--;
+	p = &vhub->ports[port];
+
+	switch(feat) {
+	case USB_PORT_FEAT_SUSPEND:
+		if (!(p->status & USB_PORT_STAT_ENABLE))
+			return std_req_complete;
+		ast_vhub_change_port_stat(vhub, port,
+					  0, USB_PORT_STAT_SUSPEND,
+					  false);
+		ast_vhub_dev_suspend(&p->dev);
+		return std_req_complete;
+	case USB_PORT_FEAT_RESET:
+		EPDBG(ep, "Port reset !\n");
+		ast_vhub_port_reset(vhub, port);
+		return std_req_complete;
+	case USB_PORT_FEAT_POWER:
+		/*
+		 * On Power-on, we mark the connected flag changed,
+		 * if there's a connected device, some hosts will
+		 * otherwise fail to detect it.
+		 */
+		if (p->status & USB_PORT_STAT_CONNECTION) {
+			p->change |= USB_PORT_STAT_C_CONNECTION;
+			ast_vhub_update_hub_ep1(vhub, port);
+		}
+		return std_req_complete;
+	case USB_PORT_FEAT_TEST:
+	case USB_PORT_FEAT_INDICATOR:
+		/* We don't do anything with these */
+		return std_req_complete;
+	}
+	return std_req_stall;
+}
+
+static enum std_req_rc ast_vhub_clr_port_feature(struct ast_vhub_ep *ep,
+						 u8 port, u16 feat)
+{
+	struct ast_vhub *vhub = ep->vhub;
+	struct ast_vhub_port *p;
+
+	if (port == 0 || port > vhub->max_ports)
+		return std_req_stall;
+	port--;
+	p = &vhub->ports[port];
+
+	switch(feat) {
+	case USB_PORT_FEAT_ENABLE:
+		ast_vhub_change_port_stat(vhub, port,
+					  USB_PORT_STAT_ENABLE |
+					  USB_PORT_STAT_SUSPEND, 0,
+					  false);
+		ast_vhub_dev_suspend(&p->dev);
+		return std_req_complete;
+	case USB_PORT_FEAT_SUSPEND:
+		if (!(p->status & USB_PORT_STAT_SUSPEND))
+			return std_req_complete;
+		ast_vhub_change_port_stat(vhub, port,
+					  USB_PORT_STAT_SUSPEND, 0,
+					  false);
+		ast_vhub_dev_resume(&p->dev);
+		return std_req_complete;
+	case USB_PORT_FEAT_POWER:
+		/* We don't do power control */
+		return std_req_complete;
+	case USB_PORT_FEAT_INDICATOR:
+		/* We don't have indicators */
+		return std_req_complete;
+	case USB_PORT_FEAT_C_CONNECTION:
+	case USB_PORT_FEAT_C_ENABLE:
+	case USB_PORT_FEAT_C_SUSPEND:
+	case USB_PORT_FEAT_C_OVER_CURRENT:
+	case USB_PORT_FEAT_C_RESET:
+		/* Clear state-change feature */
+		p->change &= ~(1u << (feat - 16));
+		ast_vhub_update_hub_ep1(vhub, port);
+		return std_req_complete;
+	}
+	return std_req_stall;
+}
+
+static enum std_req_rc ast_vhub_get_port_stat(struct ast_vhub_ep *ep,
+					      u8 port)
+{
+	struct ast_vhub *vhub = ep->vhub;
+	u16 stat, chg;
+
+	if (port == 0 || port > vhub->max_ports)
+		return std_req_stall;
+	port--;
+
+	stat = vhub->ports[port].status;
+	chg = vhub->ports[port].change;
+
+	/* We always have power */
+	stat |= USB_PORT_STAT_POWER;
+
+	EPDBG(ep, " port status=%04x change=%04x\n", stat, chg);
+
+	return ast_vhub_simple_reply(ep,
+				     stat & 0xff,
+				     stat >> 8,
+				     chg & 0xff,
+				     chg >> 8);
+}
+
+enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep,
+					   struct usb_ctrlrequest *crq)
+{
+	u16 wValue, wIndex, wLength;
+
+	wValue = le16_to_cpu(crq->wValue);
+	wIndex = le16_to_cpu(crq->wIndex);
+	wLength = le16_to_cpu(crq->wLength);
+
+	switch ((crq->bRequestType << 8) | crq->bRequest) {
+	case GetHubStatus:
+		EPDBG(ep, "GetHubStatus\n");
+		return ast_vhub_simple_reply(ep, 0, 0, 0, 0);
+	case GetPortStatus:
+		EPDBG(ep, "GetPortStatus(%d)\n", wIndex & 0xff);
+		return ast_vhub_get_port_stat(ep, wIndex & 0xf);
+	case GetHubDescriptor:
+		if (wValue != (USB_DT_HUB << 8))
+			return std_req_stall;
+		EPDBG(ep, "GetHubDescriptor(%d)\n", wIndex & 0xff);
+		return ast_vhub_rep_desc(ep, USB_DT_HUB, wLength);
+	case SetHubFeature:
+	case ClearHubFeature:
+		EPDBG(ep, "Get/SetHubFeature(%d)\n", wValue);
+		/* No feature, just complete the requests */
+		if (wValue == C_HUB_LOCAL_POWER ||
+		    wValue == C_HUB_OVER_CURRENT)
+			return std_req_complete;
+		return std_req_stall;
+	case SetPortFeature:
+		EPDBG(ep, "SetPortFeature(%d,%d)\n", wIndex & 0xf, wValue);
+		return ast_vhub_set_port_feature(ep, wIndex & 0xf, wValue);
+	case ClearPortFeature:
+		EPDBG(ep, "ClearPortFeature(%d,%d)\n", wIndex & 0xf, wValue);
+		return ast_vhub_clr_port_feature(ep, wIndex & 0xf, wValue);
+	case ClearTTBuffer:
+	case ResetTT:
+	case StopTT:
+		return std_req_complete;
+	case GetTTState:
+		return ast_vhub_simple_reply(ep, 0, 0, 0, 0);
+	default:
+		EPDBG(ep, "Unknown class request\n");
+	}
+	return std_req_stall;
+}
+
+void ast_vhub_hub_suspend(struct ast_vhub *vhub)
+{
+	unsigned int i;
+
+	UDCDBG(vhub, "USB bus suspend\n");
+
+	if (vhub->suspended)
+		return;
+
+	vhub->suspended = true;
+
+	/*
+	 * Forward to unsuspended ports without changing
+	 * their connection status.
+	 */
+	for (i = 0; i < vhub->max_ports; i++) {
+		struct ast_vhub_port *p = &vhub->ports[i];
+
+		if (!(p->status & USB_PORT_STAT_SUSPEND))
+			ast_vhub_dev_suspend(&p->dev);
+	}
+}
+
+void ast_vhub_hub_resume(struct ast_vhub *vhub)
+{
+	unsigned int i;
+
+	UDCDBG(vhub, "USB bus resume\n");
+
+	if (!vhub->suspended)
+		return;
+
+	vhub->suspended = false;
+
+	/*
+	 * Forward to unsuspended ports without changing
+	 * their connection status.
+	 */
+	for (i = 0; i < vhub->max_ports; i++) {
+		struct ast_vhub_port *p = &vhub->ports[i];
+
+		if (!(p->status & USB_PORT_STAT_SUSPEND))
+			ast_vhub_dev_resume(&p->dev);
+	}
+}
+
+void ast_vhub_hub_reset(struct ast_vhub *vhub)
+{
+	unsigned int i;
+
+	UDCDBG(vhub, "USB bus reset\n");
+
+	/*
+	 * Is the speed known ? If not we don't care, we aren't
+	 * initialized yet and ports haven't been enabled.
+	 */
+	if (vhub->speed == USB_SPEED_UNKNOWN)
+		return;
+
+	/* We aren't suspended anymore obviously */
+	vhub->suspended = false;
+
+	/* No speed set */
+	vhub->speed = USB_SPEED_UNKNOWN;
+
+	/* Wakeup not enabled anymore */
+	vhub->wakeup_en = false;
+
+	/*
+	 * Clear all port status, disable gadgets and "suspend"
+	 * them. They will be woken up by a port reset.
+	 */
+	for (i = 0; i < vhub->max_ports; i++) {
+		struct ast_vhub_port *p = &vhub->ports[i];
+
+		/* Only keep the connected flag */
+		p->status &= USB_PORT_STAT_CONNECTION;
+		p->change = 0;
+
+		/* Suspend the gadget if any */
+		ast_vhub_dev_suspend(&p->dev);
+	}
+
+	/* Cleanup HW */
+	writel(0, vhub->regs + AST_VHUB_CONF);
+	writel(0, vhub->regs + AST_VHUB_EP0_CTRL);
+	writel(VHUB_EP1_CTRL_RESET_TOGGLE |
+	       VHUB_EP1_CTRL_ENABLE,
+	       vhub->regs + AST_VHUB_EP1_CTRL);
+	writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG);
+}
+
+static void ast_vhub_of_parse_dev_desc(struct ast_vhub *vhub,
+				       const struct device_node *vhub_np)
+{
+	u16 id;
+	u32 data;
+
+	if (!of_property_read_u32(vhub_np, "vhub-vendor-id", &data)) {
+		id = (u16)data;
+		vhub->vhub_dev_desc.idVendor = cpu_to_le16(id);
+	}
+	if (!of_property_read_u32(vhub_np, "vhub-product-id", &data)) {
+		id = (u16)data;
+		vhub->vhub_dev_desc.idProduct = cpu_to_le16(id);
+	}
+	if (!of_property_read_u32(vhub_np, "vhub-device-revision", &data)) {
+		id = (u16)data;
+		vhub->vhub_dev_desc.bcdDevice = cpu_to_le16(id);
+	}
+}
+
+static void ast_vhub_fixup_usb1_dev_desc(struct ast_vhub *vhub)
+{
+	vhub->vhub_dev_desc.bcdUSB = cpu_to_le16(0x0100);
+	vhub->vhub_dev_desc.bDeviceProtocol = 0;
+}
+
+static struct usb_gadget_string_container*
+ast_vhub_str_container_alloc(struct ast_vhub *vhub)
+{
+	unsigned int size;
+	struct usb_string *str_array;
+	struct usb_gadget_strings *lang_str;
+	struct usb_gadget_string_container *container;
+
+	size = sizeof(*container);
+	size += sizeof(struct usb_gadget_strings);
+	size += sizeof(struct usb_string) * AST_VHUB_STR_INDEX_MAX;
+	container = devm_kzalloc(&vhub->pdev->dev, size, GFP_KERNEL);
+	if (!container)
+		return ERR_PTR(-ENOMEM);
+
+	lang_str = ast_vhub_str_of_container(container);
+	str_array = (struct usb_string *)(lang_str + 1);
+	lang_str->strings = str_array;
+	return container;
+}
+
+static void ast_vhub_str_deep_copy(struct usb_gadget_strings *dest,
+				   const struct usb_gadget_strings *src)
+{
+	struct usb_string *src_array = src->strings;
+	struct usb_string *dest_array = dest->strings;
+
+	dest->language = src->language;
+	if (src_array && dest_array) {
+		do {
+			*dest_array = *src_array;
+			dest_array++;
+			src_array++;
+		} while (src_array->s);
+	}
+}
+
+static int ast_vhub_str_alloc_add(struct ast_vhub *vhub,
+				  const struct usb_gadget_strings *src_str)
+{
+	struct usb_gadget_strings *dest_str;
+	struct usb_gadget_string_container *container;
+
+	container = ast_vhub_str_container_alloc(vhub);
+	if (IS_ERR(container))
+		return PTR_ERR(container);
+
+	dest_str = ast_vhub_str_of_container(container);
+	ast_vhub_str_deep_copy(dest_str, src_str);
+	list_add_tail(&container->list, &vhub->vhub_str_desc);
+
+	return 0;
+}
+
+static const struct {
+	const char *name;
+	u8 id;
+} str_id_map[] = {
+	{"manufacturer",	AST_VHUB_STR_MANUF},
+	{"product",		AST_VHUB_STR_PRODUCT},
+	{"serial-number",	AST_VHUB_STR_SERIAL},
+	{},
+};
+
+static int ast_vhub_of_parse_str_desc(struct ast_vhub *vhub,
+				      const struct device_node *desc_np)
+{
+	u32 langid;
+	int ret = 0;
+	int i, offset;
+	const char *str;
+	struct device_node *child;
+	struct usb_string str_array[AST_VHUB_STR_INDEX_MAX];
+	struct usb_gadget_strings lang_str = {
+		.strings = (struct usb_string *)str_array,
+	};
+
+	for_each_child_of_node(desc_np, child) {
+		if (of_property_read_u32(child, "reg", &langid))
+			continue; /* no language identifier specified */
+
+		if (!usb_validate_langid(langid))
+			continue; /* invalid language identifier */
+
+		lang_str.language = langid;
+		for (i = offset = 0; str_id_map[i].name; i++) {
+			str = of_get_property(child, str_id_map[i].name, NULL);
+			if (str) {
+				str_array[offset].s = str;
+				str_array[offset].id = str_id_map[i].id;
+				offset++;
+			}
+		}
+		str_array[offset].id = 0;
+		str_array[offset].s = NULL;
+
+		ret = ast_vhub_str_alloc_add(vhub, &lang_str);
+		if (ret) {
+			of_node_put(child);
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static int ast_vhub_init_desc(struct ast_vhub *vhub)
+{
+	int ret;
+	struct device_node *desc_np;
+	const struct device_node *vhub_np = vhub->pdev->dev.of_node;
+
+	/* Initialize vhub Device Descriptor. */
+	memcpy(&vhub->vhub_dev_desc, &ast_vhub_dev_desc,
+		sizeof(vhub->vhub_dev_desc));
+	ast_vhub_of_parse_dev_desc(vhub, vhub_np);
+	if (vhub->force_usb1)
+		ast_vhub_fixup_usb1_dev_desc(vhub);
+
+	/* Initialize vhub Configuration Descriptor. */
+	memcpy(&vhub->vhub_conf_desc, &ast_vhub_conf_desc,
+		sizeof(vhub->vhub_conf_desc));
+
+	/* Initialize vhub Hub Descriptor. */
+	memcpy(&vhub->vhub_hub_desc, &ast_vhub_hub_desc,
+		sizeof(vhub->vhub_hub_desc));
+	vhub->vhub_hub_desc.bNbrPorts = vhub->max_ports;
+
+	/* Initialize vhub String Descriptors. */
+	INIT_LIST_HEAD(&vhub->vhub_str_desc);
+	desc_np = of_get_child_by_name(vhub_np, "vhub-strings");
+	if (desc_np) {
+		ret = ast_vhub_of_parse_str_desc(vhub, desc_np);
+		of_node_put(desc_np);
+	}
+	else
+		ret = ast_vhub_str_alloc_add(vhub, &ast_vhub_strings);
+
+	/* Initialize vhub Qualifier Descriptor. */
+	memcpy(&vhub->vhub_qual_desc, &ast_vhub_qual_desc,
+		sizeof(vhub->vhub_qual_desc));
+
+	return ret;
+}
+
+int ast_vhub_init_hub(struct ast_vhub *vhub)
+{
+	vhub->speed = USB_SPEED_UNKNOWN;
+	INIT_WORK(&vhub->wake_work, ast_vhub_wake_work);
+
+	return ast_vhub_init_desc(vhub);
+}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
new file mode 100644
index 000000000..6b9dfa6e1
--- /dev/null
+++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
@@ -0,0 +1,565 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#ifndef __ASPEED_VHUB_H
+#define __ASPEED_VHUB_H
+
+#include <linux/usb.h>
+#include <linux/usb/ch11.h>
+
+/*****************************
+ *                           *
+ * VHUB register definitions *
+ *                           *
+ *****************************/
+
+#define	AST_VHUB_CTRL		0x00	/* Root Function Control & Status Register */
+#define	AST_VHUB_CONF		0x04	/* Root Configuration Setting Register */
+#define	AST_VHUB_IER		0x08	/* Interrupt Ctrl Register */
+#define	AST_VHUB_ISR		0x0C	/* Interrupt Status Register */
+#define	AST_VHUB_EP_ACK_IER	0x10	/* Programmable Endpoint Pool ACK Interrupt Enable Register */
+#define	AST_VHUB_EP_NACK_IER	0x14	/* Programmable Endpoint Pool NACK Interrupt Enable Register  */
+#define AST_VHUB_EP_ACK_ISR	0x18	/* Programmable Endpoint Pool ACK Interrupt Status Register  */
+#define AST_VHUB_EP_NACK_ISR	0x1C	/* Programmable Endpoint Pool NACK Interrupt Status Register  */
+#define AST_VHUB_SW_RESET	0x20	/* Device Controller Soft Reset Enable Register */
+#define AST_VHUB_USBSTS		0x24	/* USB Status Register */
+#define AST_VHUB_EP_TOGGLE	0x28	/* Programmable Endpoint Pool Data Toggle Value Set */
+#define AST_VHUB_ISO_FAIL_ACC	0x2C	/* Isochronous Transaction Fail Accumulator */
+#define AST_VHUB_EP0_CTRL	0x30	/* Endpoint 0 Contrl/Status Register */
+#define AST_VHUB_EP0_DATA	0x34	/* Base Address of Endpoint 0 In/OUT Data Buffer Register */
+#define AST_VHUB_EP1_CTRL	0x38	/* Endpoint 1 Contrl/Status Register */
+#define AST_VHUB_EP1_STS_CHG	0x3C	/* Endpoint 1 Status Change Bitmap Data */
+#define AST_VHUB_SETUP0		0x80	/* Root Device Setup Data Buffer0 */
+#define AST_VHUB_SETUP1		0x84	/* Root Device Setup Data Buffer1 */
+
+/* Main control reg */
+#define VHUB_CTRL_PHY_CLK			(1 << 31)
+#define VHUB_CTRL_PHY_LOOP_TEST			(1 << 25)
+#define VHUB_CTRL_DN_PWN			(1 << 24)
+#define VHUB_CTRL_DP_PWN			(1 << 23)
+#define VHUB_CTRL_LONG_DESC			(1 << 18)
+#define VHUB_CTRL_ISO_RSP_CTRL			(1 << 17)
+#define VHUB_CTRL_SPLIT_IN			(1 << 16)
+#define VHUB_CTRL_LOOP_T_RESULT			(1 << 15)
+#define VHUB_CTRL_LOOP_T_STS			(1 << 14)
+#define VHUB_CTRL_PHY_BIST_RESULT		(1 << 13)
+#define VHUB_CTRL_PHY_BIST_CTRL			(1 << 12)
+#define VHUB_CTRL_PHY_RESET_DIS			(1 << 11)
+#define VHUB_CTRL_SET_TEST_MODE(x)		((x) << 8)
+#define VHUB_CTRL_MANUAL_REMOTE_WAKEUP		(1 << 4)
+#define VHUB_CTRL_AUTO_REMOTE_WAKEUP		(1 << 3)
+#define VHUB_CTRL_CLK_STOP_SUSPEND		(1 << 2)
+#define VHUB_CTRL_FULL_SPEED_ONLY		(1 << 1)
+#define VHUB_CTRL_UPSTREAM_CONNECT		(1 << 0)
+
+/* IER & ISR */
+#define VHUB_IRQ_DEV1_BIT			9
+#define VHUB_IRQ_USB_CMD_DEADLOCK		(1 << 18)
+#define VHUB_IRQ_EP_POOL_NAK			(1 << 17)
+#define VHUB_IRQ_EP_POOL_ACK_STALL		(1 << 16)
+#define VHUB_IRQ_DEVICE1			(1 << (VHUB_IRQ_DEV1_BIT))
+#define VHUB_IRQ_BUS_RESUME			(1 << 8)
+#define VHUB_IRQ_BUS_SUSPEND 			(1 << 7)
+#define VHUB_IRQ_BUS_RESET 			(1 << 6)
+#define VHUB_IRQ_HUB_EP1_IN_DATA_ACK		(1 << 5)
+#define VHUB_IRQ_HUB_EP0_IN_DATA_NAK		(1 << 4)
+#define VHUB_IRQ_HUB_EP0_IN_ACK_STALL		(1 << 3)
+#define VHUB_IRQ_HUB_EP0_OUT_NAK		(1 << 2)
+#define VHUB_IRQ_HUB_EP0_OUT_ACK_STALL		(1 << 1)
+#define VHUB_IRQ_HUB_EP0_SETUP			(1 << 0)
+#define VHUB_IRQ_ACK_ALL			0x1ff
+
+/* Downstream device IRQ mask. */
+#define VHUB_DEV_IRQ(n)				(VHUB_IRQ_DEVICE1 << (n))
+
+/* SW reset reg */
+#define VHUB_SW_RESET_EP_POOL			(1 << 9)
+#define VHUB_SW_RESET_DMA_CONTROLLER		(1 << 8)
+#define VHUB_SW_RESET_DEVICE5			(1 << 5)
+#define VHUB_SW_RESET_DEVICE4			(1 << 4)
+#define VHUB_SW_RESET_DEVICE3			(1 << 3)
+#define VHUB_SW_RESET_DEVICE2			(1 << 2)
+#define VHUB_SW_RESET_DEVICE1			(1 << 1)
+#define VHUB_SW_RESET_ROOT_HUB			(1 << 0)
+
+/* EP ACK/NACK IRQ masks */
+#define VHUB_EP_IRQ(n)				(1 << (n))
+
+/* USB status reg */
+#define VHUB_USBSTS_HISPEED			(1 << 27)
+
+/* EP toggle */
+#define VHUB_EP_TOGGLE_VALUE			(1 << 8)
+#define VHUB_EP_TOGGLE_SET_EPNUM(x)		((x) & 0x1f)
+
+/* HUB EP0 control */
+#define VHUB_EP0_CTRL_STALL			(1 << 0)
+#define VHUB_EP0_TX_BUFF_RDY			(1 << 1)
+#define VHUB_EP0_RX_BUFF_RDY			(1 << 2)
+#define VHUB_EP0_RX_LEN(x)			(((x) >> 16) & 0x7f)
+#define VHUB_EP0_SET_TX_LEN(x)			(((x) & 0x7f) << 8)
+
+/* HUB EP1 control */
+#define VHUB_EP1_CTRL_RESET_TOGGLE		(1 << 2)
+#define VHUB_EP1_CTRL_STALL			(1 << 1)
+#define VHUB_EP1_CTRL_ENABLE			(1 << 0)
+
+/***********************************
+ *                                 *
+ * per-device register definitions *
+ *                                 *
+ ***********************************/
+#define AST_VHUB_DEV_EN_CTRL		0x00
+#define AST_VHUB_DEV_ISR		0x04
+#define AST_VHUB_DEV_EP0_CTRL		0x08
+#define AST_VHUB_DEV_EP0_DATA		0x0c
+
+/* Device enable control */
+#define VHUB_DEV_EN_SET_ADDR(x)			((x) << 8)
+#define VHUB_DEV_EN_ADDR_MASK			((0xff) << 8)
+#define VHUB_DEV_EN_EP0_NAK_IRQEN		(1 << 6)
+#define VHUB_DEV_EN_EP0_IN_ACK_IRQEN		(1 << 5)
+#define VHUB_DEV_EN_EP0_OUT_NAK_IRQEN		(1 << 4)
+#define VHUB_DEV_EN_EP0_OUT_ACK_IRQEN		(1 << 3)
+#define VHUB_DEV_EN_EP0_SETUP_IRQEN		(1 << 2)
+#define VHUB_DEV_EN_SPEED_SEL_HIGH		(1 << 1)
+#define VHUB_DEV_EN_ENABLE_PORT			(1 << 0)
+
+/* Interrupt status */
+#define VHUV_DEV_IRQ_EP0_IN_DATA_NACK		(1 << 4)
+#define VHUV_DEV_IRQ_EP0_IN_ACK_STALL		(1 << 3)
+#define VHUV_DEV_IRQ_EP0_OUT_DATA_NACK		(1 << 2)
+#define VHUV_DEV_IRQ_EP0_OUT_ACK_STALL		(1 << 1)
+#define VHUV_DEV_IRQ_EP0_SETUP			(1 << 0)
+
+/* Control bits.
+ *
+ * Note: The driver relies on the bulk of those bits
+ *       matching corresponding vHub EP0 control bits
+ */
+#define VHUB_DEV_EP0_CTRL_STALL			VHUB_EP0_CTRL_STALL
+#define VHUB_DEV_EP0_TX_BUFF_RDY		VHUB_EP0_TX_BUFF_RDY
+#define VHUB_DEV_EP0_RX_BUFF_RDY		VHUB_EP0_RX_BUFF_RDY
+#define VHUB_DEV_EP0_RX_LEN(x)			VHUB_EP0_RX_LEN(x)
+#define VHUB_DEV_EP0_SET_TX_LEN(x)		VHUB_EP0_SET_TX_LEN(x)
+
+/*************************************
+ *                                   *
+ * per-endpoint register definitions *
+ *                                   *
+ *************************************/
+
+#define AST_VHUB_EP_CONFIG		0x00
+#define AST_VHUB_EP_DMA_CTLSTAT		0x04
+#define AST_VHUB_EP_DESC_BASE		0x08
+#define AST_VHUB_EP_DESC_STATUS		0x0C
+
+/* EP config reg */
+#define VHUB_EP_CFG_SET_MAX_PKT(x)	(((x) & 0x3ff) << 16)
+#define VHUB_EP_CFG_AUTO_DATA_DISABLE	(1 << 13)
+#define VHUB_EP_CFG_STALL_CTRL		(1 << 12)
+#define VHUB_EP_CFG_SET_EP_NUM(x)	(((x) & 0xf) << 8)
+#define VHUB_EP_CFG_SET_TYPE(x)		((x) << 5)
+#define   EP_TYPE_OFF			0
+#define   EP_TYPE_BULK			1
+#define   EP_TYPE_INT			2
+#define   EP_TYPE_ISO			3
+#define VHUB_EP_CFG_DIR_OUT		(1 << 4)
+#define VHUB_EP_CFG_SET_DEV(x)		((x) << 1)
+#define VHUB_EP_CFG_ENABLE		(1 << 0)
+
+/* EP DMA control */
+#define VHUB_EP_DMA_PROC_STATUS(x)	(((x) >> 4) & 0xf)
+#define   EP_DMA_PROC_RX_IDLE		0
+#define   EP_DMA_PROC_TX_IDLE		8
+#define VHUB_EP_DMA_IN_LONG_MODE	(1 << 3)
+#define VHUB_EP_DMA_OUT_CONTIG_MODE	(1 << 3)
+#define VHUB_EP_DMA_CTRL_RESET		(1 << 2)
+#define VHUB_EP_DMA_SINGLE_STAGE	(1 << 1)
+#define VHUB_EP_DMA_DESC_MODE		(1 << 0)
+
+/* EP DMA status */
+#define VHUB_EP_DMA_SET_TX_SIZE(x)	((x) << 16)
+#define VHUB_EP_DMA_TX_SIZE(x)		(((x) >> 16) & 0x7ff)
+#define VHUB_EP_DMA_RPTR(x)		(((x) >> 8) & 0xff)
+#define VHUB_EP_DMA_SET_RPTR(x)		(((x) & 0xff) << 8)
+#define VHUB_EP_DMA_SET_CPU_WPTR(x)	(x)
+#define VHUB_EP_DMA_SINGLE_KICK		(1 << 0) /* WPTR = 1 for single mode */
+
+/*******************************
+ *                             *
+ * DMA descriptors definitions *
+ *                             *
+ *******************************/
+
+/* Desc W1 IN */
+#define VHUB_DSC1_IN_INTERRUPT		(1 << 31)
+#define VHUB_DSC1_IN_SPID_DATA0		(0 << 14)
+#define VHUB_DSC1_IN_SPID_DATA2		(1 << 14)
+#define VHUB_DSC1_IN_SPID_DATA1		(2 << 14)
+#define VHUB_DSC1_IN_SPID_MDATA		(3 << 14)
+#define VHUB_DSC1_IN_SET_LEN(x)		((x) & 0xfff)
+#define VHUB_DSC1_IN_LEN(x)		((x) & 0xfff)
+
+/****************************************
+ *                                      *
+ * Data structures and misc definitions *
+ *                                      *
+ ****************************************/
+
+/*
+ * AST_VHUB_NUM_GEN_EPs and AST_VHUB_NUM_PORTS are kept to avoid breaking
+ * existing AST2400/AST2500 platforms. AST2600 and future vhub revisions
+ * should define number of downstream ports and endpoints in device tree.
+ */
+#define AST_VHUB_NUM_GEN_EPs	15	/* Generic non-0 EPs */
+#define AST_VHUB_NUM_PORTS	5	/* vHub ports */
+#define AST_VHUB_EP0_MAX_PACKET	64	/* EP0's max packet size */
+#define AST_VHUB_EPn_MAX_PACKET	1024	/* Generic EPs max packet size */
+#define AST_VHUB_DESCS_COUNT	256	/* Use 256 descriptor mode (valid
+					 * values are 256 and 32)
+					 */
+
+struct ast_vhub;
+struct ast_vhub_dev;
+
+/*
+ * DMA descriptor (generic EPs only, currently only used
+ * for IN endpoints
+ */
+struct ast_vhub_desc {
+	__le32	w0;
+	__le32	w1;
+};
+
+/* A transfer request, either core-originated or internal */
+struct ast_vhub_req {
+	struct usb_request	req;
+	struct list_head	queue;
+
+	/* Actual count written to descriptors (desc mode only) */
+	unsigned int		act_count;
+
+	/*
+	 * Desc number of the final packet or -1. For non-desc
+	 * mode (or ep0), any >= 0 value means "last packet"
+	 */
+	int			last_desc;
+
+	/* Request active (pending DMAs) */
+	bool			active  : 1;
+
+	/* Internal request (don't call back core) */
+	bool			internal : 1;
+};
+#define to_ast_req(__ureq) container_of(__ureq, struct ast_vhub_req, req)
+
+/* Current state of an EP0 */
+enum ep0_state {
+	ep0_state_token,
+	ep0_state_data,
+	ep0_state_status,
+	ep0_state_stall,
+};
+
+/*
+ * An endpoint, either generic, ep0, actual gadget EP
+ * or internal use vhub EP0. vhub EP1 doesn't have an
+ * associated structure as it's mostly HW managed.
+ */
+struct ast_vhub_ep {
+	struct usb_ep		ep;
+
+	/* Request queue */
+	struct list_head	queue;
+
+	/* EP index in the device, 0 means this is an EP0 */
+	unsigned int		d_idx;
+
+	/* Dev pointer or NULL for vHub EP0 */
+	struct ast_vhub_dev	*dev;
+
+	/* vHub itself */
+	struct ast_vhub		*vhub;
+
+	/*
+	 * DMA buffer for EP0, fallback DMA buffer for misaligned
+	 * OUT transfers for generic EPs
+	 */
+	void			*buf;
+	dma_addr_t		buf_dma;
+
+	/* The rest depends on the EP type */
+	union {
+		/* EP0 (either device or vhub) */
+		struct {
+			/*
+			 * EP0 registers are "similar" for
+			 * vHub and devices but located in
+			 * different places.
+			 */
+			void __iomem		*ctlstat;
+			void __iomem		*setup;
+
+			/* Current state & direction */
+			enum ep0_state		state;
+			bool			dir_in;
+
+			/* Internal use request */
+			struct ast_vhub_req	req;
+		} ep0;
+
+		/* Generic endpoint (aka EPn) */
+		struct {
+			/* Registers */
+			void __iomem   		*regs;
+
+			/* Index in global pool (zero-based) */
+			unsigned int		g_idx;
+
+			/* DMA Descriptors */
+			struct ast_vhub_desc	*descs;
+			dma_addr_t		descs_dma;
+			unsigned int		d_next;
+			unsigned int		d_last;
+			unsigned int		dma_conf;
+
+			/* Max chunk size for IN EPs */
+			unsigned int		chunk_max;
+
+			/* State flags */
+			bool			is_in :  1;
+			bool			is_iso : 1;
+			bool			stalled : 1;
+			bool			wedged : 1;
+			bool			enabled : 1;
+			bool			desc_mode : 1;
+		} epn;
+	};
+};
+#define to_ast_ep(__uep) container_of(__uep, struct ast_vhub_ep, ep)
+
+/* A device attached to a vHub port */
+struct ast_vhub_dev {
+	struct ast_vhub			*vhub;
+	void __iomem			*regs;
+
+	/* Device index (zero-based) and name string */
+	unsigned int			index;
+	const char			*name;
+
+	/* sysfs enclosure for the gadget gunk */
+	struct device			*port_dev;
+
+	/* Link to gadget core */
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	bool				registered : 1;
+	bool				wakeup_en : 1;
+	bool				enabled : 1;
+
+	/* Endpoint structures */
+	struct ast_vhub_ep		ep0;
+	struct ast_vhub_ep		**epns;
+	u32				max_epns;
+
+};
+#define to_ast_dev(__g) container_of(__g, struct ast_vhub_dev, gadget)
+
+/* Per vhub port stateinfo structure */
+struct ast_vhub_port {
+	/* Port status & status change registers */
+	u16			status;
+	u16			change;
+
+	/* Associated device slot */
+	struct ast_vhub_dev	dev;
+};
+
+struct ast_vhub_full_cdesc {
+	struct usb_config_descriptor	cfg;
+	struct usb_interface_descriptor intf;
+	struct usb_endpoint_descriptor	ep;
+} __packed;
+
+/* Global vhub structure */
+struct ast_vhub {
+	struct platform_device		*pdev;
+	void __iomem			*regs;
+	int				irq;
+	spinlock_t			lock;
+	struct work_struct		wake_work;
+	struct clk			*clk;
+
+	/* EP0 DMA buffers allocated in one chunk */
+	void				*ep0_bufs;
+	dma_addr_t			ep0_bufs_dma;
+
+	/* EP0 of the vhub itself */
+	struct ast_vhub_ep		ep0;
+
+	/* State of vhub ep1 */
+	bool				ep1_stalled : 1;
+
+	/* Per-port info */
+	struct ast_vhub_port		*ports;
+	u32				max_ports;
+	u32				port_irq_mask;
+
+	/* Generic EP data structures */
+	struct ast_vhub_ep		*epns;
+	u32				max_epns;
+
+	/* Upstream bus is suspended ? */
+	bool				suspended : 1;
+
+	/* Hub itself can signal remote wakeup */
+	bool				wakeup_en : 1;
+
+	/* Force full speed only */
+	bool				force_usb1 : 1;
+
+	/* Upstream bus speed captured at bus reset */
+	unsigned int			speed;
+
+	/* Standard USB Descriptors of the vhub. */
+	struct usb_device_descriptor	vhub_dev_desc;
+	struct ast_vhub_full_cdesc	vhub_conf_desc;
+	struct usb_hub_descriptor	vhub_hub_desc;
+	struct list_head		vhub_str_desc;
+	struct usb_qualifier_descriptor	vhub_qual_desc;
+};
+
+/* Standard request handlers result codes */
+enum std_req_rc {
+	std_req_stall = -1,	/* Stall requested */
+	std_req_complete = 0,	/* Request completed with no data */
+	std_req_data = 1,	/* Request completed with data */
+	std_req_driver = 2,	/* Pass to driver pls */
+};
+
+#ifdef CONFIG_USB_GADGET_VERBOSE
+#define UDCVDBG(u, fmt...)	dev_dbg(&(u)->pdev->dev, fmt)
+
+#define EPVDBG(ep, fmt, ...)	do {			\
+	dev_dbg(&(ep)->vhub->pdev->dev,			\
+		"%s:EP%d " fmt,				\
+		(ep)->dev ? (ep)->dev->name : "hub",	\
+		(ep)->d_idx, ##__VA_ARGS__);		\
+	} while(0)
+
+#define DVDBG(d, fmt, ...)	do {			\
+	dev_dbg(&(d)->vhub->pdev->dev,			\
+		"%s " fmt, (d)->name,			\
+		##__VA_ARGS__);				\
+	} while(0)
+
+#else
+#define UDCVDBG(u, fmt...)	do { } while(0)
+#define EPVDBG(ep, fmt, ...)	do { } while(0)
+#define DVDBG(d, fmt, ...)	do { } while(0)
+#endif
+
+#ifdef CONFIG_USB_GADGET_DEBUG
+#define UDCDBG(u, fmt...)	dev_dbg(&(u)->pdev->dev, fmt)
+
+#define EPDBG(ep, fmt, ...)	do {			\
+	dev_dbg(&(ep)->vhub->pdev->dev,			\
+		"%s:EP%d " fmt,				\
+		(ep)->dev ? (ep)->dev->name : "hub",	\
+		(ep)->d_idx, ##__VA_ARGS__);		\
+	} while(0)
+
+#define DDBG(d, fmt, ...)	do {			\
+	dev_dbg(&(d)->vhub->pdev->dev,			\
+		"%s " fmt, (d)->name,			\
+		##__VA_ARGS__);				\
+	} while(0)
+#else
+#define UDCDBG(u, fmt...)	do { } while(0)
+#define EPDBG(ep, fmt, ...)	do { } while(0)
+#define DDBG(d, fmt, ...)	do { } while(0)
+#endif
+
+static inline void vhub_dma_workaround(void *addr)
+{
+	/*
+	 * This works around a confirmed HW issue with the Aspeed chip.
+	 *
+	 * The core uses a different bus to memory than the AHB going to
+	 * the USB device controller. Due to the latter having a higher
+	 * priority than the core for arbitration on that bus, it's
+	 * possible for an MMIO to the device, followed by a DMA by the
+	 * device from memory to all be performed and services before
+	 * a previous store to memory gets completed.
+	 *
+	 * This the following scenario can happen:
+	 *
+	 *    - Driver writes to a DMA descriptor (Mbus)
+	 *    - Driver writes to the MMIO register to start the DMA (AHB)
+	 *    - The gadget sees the second write and sends a read of the
+	 *      descriptor to the memory controller (Mbus)
+	 *    - The gadget hits memory before the descriptor write
+	 *      causing it to read an obsolete value.
+	 *
+	 * Thankfully the problem is limited to the USB gadget device, other
+	 * masters in the SoC all have a lower priority than the core, thus
+	 * ensuring that the store by the core arrives first.
+	 *
+	 * The workaround consists of using a dummy read of the memory before
+	 * doing the MMIO writes. This will ensure that the previous writes
+	 * have been "pushed out".
+	 */
+	mb();
+	(void)__raw_readl((void __iomem *)addr);
+}
+
+/* core.c */
+void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req,
+		   int status);
+void ast_vhub_nuke(struct ast_vhub_ep *ep, int status);
+struct usb_request *ast_vhub_alloc_request(struct usb_ep *u_ep,
+					   gfp_t gfp_flags);
+void ast_vhub_free_request(struct usb_ep *u_ep, struct usb_request *u_req);
+void ast_vhub_init_hw(struct ast_vhub *vhub);
+
+/* ep0.c */
+void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack);
+void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep);
+void ast_vhub_reset_ep0(struct ast_vhub_dev *dev);
+void ast_vhub_init_ep0(struct ast_vhub *vhub, struct ast_vhub_ep *ep,
+		       struct ast_vhub_dev *dev);
+int ast_vhub_reply(struct ast_vhub_ep *ep, char *ptr, int len);
+int __ast_vhub_simple_reply(struct ast_vhub_ep *ep, int len, ...);
+#define ast_vhub_simple_reply(udc, ...)					       \
+	__ast_vhub_simple_reply((udc),					       \
+			       sizeof((u8[]) { __VA_ARGS__ })/sizeof(u8),      \
+			       __VA_ARGS__)
+
+/* hub.c */
+int ast_vhub_init_hub(struct ast_vhub *vhub);
+enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep,
+					 struct usb_ctrlrequest *crq);
+enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep,
+					   struct usb_ctrlrequest *crq);
+void ast_vhub_device_connect(struct ast_vhub *vhub, unsigned int port,
+			     bool on);
+void ast_vhub_hub_suspend(struct ast_vhub *vhub);
+void ast_vhub_hub_resume(struct ast_vhub *vhub);
+void ast_vhub_hub_reset(struct ast_vhub *vhub);
+void ast_vhub_hub_wake_all(struct ast_vhub *vhub);
+
+/* dev.c */
+int ast_vhub_init_dev(struct ast_vhub *vhub, unsigned int idx);
+void ast_vhub_del_dev(struct ast_vhub_dev *d);
+void ast_vhub_dev_irq(struct ast_vhub_dev *d);
+int ast_vhub_std_dev_request(struct ast_vhub_ep *ep,
+			     struct usb_ctrlrequest *crq);
+
+/* epn.c */
+void ast_vhub_epn_ack_irq(struct ast_vhub_ep *ep);
+void ast_vhub_update_epn_stall(struct ast_vhub_ep *ep);
+struct ast_vhub_ep *ast_vhub_alloc_epn(struct ast_vhub_dev *d, u8 addr);
+void ast_vhub_dev_suspend(struct ast_vhub_dev *d);
+void ast_vhub_dev_resume(struct ast_vhub_dev *d);
+void ast_vhub_dev_reset(struct ast_vhub_dev *d);
+
+#endif /* __ASPEED_VHUB_H */
diff --git a/drivers/usb/gadget/udc/aspeed_udc.c b/drivers/usb/gadget/udc/aspeed_udc.c
new file mode 100644
index 000000000..01968e216
--- /dev/null
+++ b/drivers/usb/gadget/udc/aspeed_udc.c
@@ -0,0 +1,1597 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Aspeed Technology Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/prefetch.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/slab.h>
+
+#define AST_UDC_NUM_ENDPOINTS		(1 + 4)
+#define AST_UDC_EP0_MAX_PACKET		64	/* EP0's max packet size */
+#define AST_UDC_EPn_MAX_PACKET		1024	/* Generic EPs max packet size */
+#define AST_UDC_DESCS_COUNT		256	/* Use 256 stages descriptor mode (32/256) */
+#define AST_UDC_DESC_MODE		1	/* Single/Multiple Stage(s) Descriptor Mode */
+
+#define AST_UDC_EP_DMA_SIZE		(AST_UDC_EPn_MAX_PACKET + 8 * AST_UDC_DESCS_COUNT)
+
+/*****************************
+ *                           *
+ * UDC register definitions  *
+ *                           *
+ *****************************/
+
+#define AST_UDC_FUNC_CTRL		0x00	/* Root Function Control & Status Register */
+#define AST_UDC_CONFIG			0x04	/* Root Configuration Setting Register */
+#define AST_UDC_IER			0x08	/* Interrupt Control Register */
+#define AST_UDC_ISR			0x0C	/* Interrupt Status Register */
+#define AST_UDC_EP_ACK_IER		0x10	/* Programmable ep Pool ACK Interrupt Enable Reg */
+#define AST_UDC_EP_NAK_IER		0x14	/* Programmable ep Pool NAK Interrupt Enable Reg */
+#define AST_UDC_EP_ACK_ISR		0x18	/* Programmable ep Pool ACK Interrupt Status Reg */
+#define AST_UDC_EP_NAK_ISR		0x1C	/* Programmable ep Pool NAK Interrupt Status Reg */
+#define AST_UDC_DEV_RESET		0x20	/* Device Controller Soft Reset Enable Register */
+#define AST_UDC_STS			0x24	/* USB Status Register */
+#define AST_VHUB_EP_DATA		0x28	/* Programmable ep Pool Data Toggle Value Set */
+#define AST_VHUB_ISO_TX_FAIL		0x2C	/* Isochronous Transaction Fail Accumulator */
+#define AST_UDC_EP0_CTRL		0x30	/* Endpoint 0 Control/Status Register */
+#define AST_UDC_EP0_DATA_BUFF		0x34	/* Base Address of ep0 IN/OUT Data Buffer Reg */
+#define AST_UDC_SETUP0			0x80    /* Root Device Setup Data Buffer0 */
+#define AST_UDC_SETUP1			0x84    /* Root Device Setup Data Buffer1 */
+
+
+/* Main control reg */
+#define USB_PHY_CLK_EN			BIT(31)
+#define USB_FIFO_DYN_PWRD_EN		BIT(19)
+#define USB_EP_LONG_DESC		BIT(18)
+#define USB_BIST_TEST_PASS		BIT(13)
+#define USB_BIST_TURN_ON		BIT(12)
+#define USB_PHY_RESET_DIS		BIT(11)
+#define USB_TEST_MODE(x)		((x) << 8)
+#define USB_FORCE_TIMER_HS		BIT(7)
+#define USB_FORCE_HS			BIT(6)
+#define USB_REMOTE_WAKEUP_12MS		BIT(5)
+#define USB_REMOTE_WAKEUP_EN		BIT(4)
+#define USB_AUTO_REMOTE_WAKEUP_EN	BIT(3)
+#define USB_STOP_CLK_IN_SUPEND		BIT(2)
+#define USB_UPSTREAM_FS			BIT(1)
+#define USB_UPSTREAM_EN			BIT(0)
+
+/* Main config reg */
+#define UDC_CFG_SET_ADDR(x)		((x) & 0x3f)
+#define UDC_CFG_ADDR_MASK		(0x3f)
+
+/* Interrupt ctrl & status reg */
+#define UDC_IRQ_EP_POOL_NAK		BIT(17)
+#define UDC_IRQ_EP_POOL_ACK_STALL	BIT(16)
+#define UDC_IRQ_BUS_RESUME		BIT(8)
+#define UDC_IRQ_BUS_SUSPEND		BIT(7)
+#define UDC_IRQ_BUS_RESET		BIT(6)
+#define UDC_IRQ_EP0_IN_DATA_NAK		BIT(4)
+#define UDC_IRQ_EP0_IN_ACK_STALL	BIT(3)
+#define UDC_IRQ_EP0_OUT_NAK		BIT(2)
+#define UDC_IRQ_EP0_OUT_ACK_STALL	BIT(1)
+#define UDC_IRQ_EP0_SETUP		BIT(0)
+#define UDC_IRQ_ACK_ALL			(0x1ff)
+
+/* EP isr reg */
+#define USB_EP3_ISR			BIT(3)
+#define USB_EP2_ISR			BIT(2)
+#define USB_EP1_ISR			BIT(1)
+#define USB_EP0_ISR			BIT(0)
+#define UDC_IRQ_EP_ACK_ALL		(0xf)
+
+/*Soft reset reg */
+#define ROOT_UDC_SOFT_RESET		BIT(0)
+
+/* USB status reg */
+#define UDC_STS_HIGHSPEED		BIT(27)
+
+/* Programmable EP data toggle */
+#define EP_TOGGLE_SET_EPNUM(x)		((x) & 0x3)
+
+/* EP0 ctrl reg */
+#define EP0_GET_RX_LEN(x)		((x >> 16) & 0x7f)
+#define EP0_TX_LEN(x)			((x & 0x7f) << 8)
+#define EP0_RX_BUFF_RDY			BIT(2)
+#define EP0_TX_BUFF_RDY			BIT(1)
+#define EP0_STALL			BIT(0)
+
+/*************************************
+ *                                   *
+ * per-endpoint register definitions *
+ *                                   *
+ *************************************/
+
+#define AST_UDC_EP_CONFIG		0x00	/* Endpoint Configuration Register */
+#define AST_UDC_EP_DMA_CTRL		0x04	/* DMA Descriptor List Control/Status Register */
+#define AST_UDC_EP_DMA_BUFF		0x08	/* DMA Descriptor/Buffer Base Address */
+#define AST_UDC_EP_DMA_STS		0x0C	/* DMA Descriptor List R/W Pointer and Status */
+
+#define AST_UDC_EP_BASE			0x200
+#define AST_UDC_EP_OFFSET		0x10
+
+/* EP config reg */
+#define EP_SET_MAX_PKT(x)		((x & 0x3ff) << 16)
+#define EP_DATA_FETCH_CTRL(x)		((x & 0x3) << 14)
+#define EP_AUTO_DATA_DISABLE		(0x1 << 13)
+#define EP_SET_EP_STALL			(0x1 << 12)
+#define EP_SET_EP_NUM(x)		((x & 0xf) << 8)
+#define EP_SET_TYPE_MASK(x)		((x) << 5)
+#define EP_TYPE_BULK			(0x1)
+#define EP_TYPE_INT			(0x2)
+#define EP_TYPE_ISO			(0x3)
+#define EP_DIR_OUT			(0x1 << 4)
+#define EP_ALLOCATED_MASK		(0x7 << 1)
+#define EP_ENABLE			BIT(0)
+
+/* EP DMA ctrl reg */
+#define EP_DMA_CTRL_GET_PROC_STS(x)	((x >> 4) & 0xf)
+#define EP_DMA_CTRL_STS_RX_IDLE		0x0
+#define EP_DMA_CTRL_STS_TX_IDLE		0x8
+#define EP_DMA_CTRL_IN_LONG_MODE	(0x1 << 3)
+#define EP_DMA_CTRL_RESET		(0x1 << 2)
+#define EP_DMA_SINGLE_STAGE		(0x1 << 1)
+#define EP_DMA_DESC_MODE		(0x1 << 0)
+
+/* EP DMA status reg */
+#define EP_DMA_SET_TX_SIZE(x)		((x & 0x7ff) << 16)
+#define EP_DMA_GET_TX_SIZE(x)		(((x) >> 16) & 0x7ff)
+#define EP_DMA_GET_RPTR(x)		(((x) >> 8) & 0xff)
+#define EP_DMA_GET_WPTR(x)		((x) & 0xff)
+#define EP_DMA_SINGLE_KICK		(1 << 0) /* WPTR = 1 for single mode */
+
+/* EP desc reg */
+#define AST_EP_DMA_DESC_INTR_ENABLE	BIT(31)
+#define AST_EP_DMA_DESC_PID_DATA0	(0 << 14)
+#define AST_EP_DMA_DESC_PID_DATA2	BIT(14)
+#define AST_EP_DMA_DESC_PID_DATA1	(2 << 14)
+#define AST_EP_DMA_DESC_PID_MDATA	(3 << 14)
+#define EP_DESC1_IN_LEN(x)		((x) & 0x1fff)
+#define AST_EP_DMA_DESC_MAX_LEN		(7680) /* Max packet length for trasmit in 1 desc */
+
+struct ast_udc_request {
+	struct usb_request	req;
+	struct list_head	queue;
+	unsigned		mapped:1;
+	unsigned int		actual_dma_length;
+	u32			saved_dma_wptr;
+};
+
+#define to_ast_req(__req) container_of(__req, struct ast_udc_request, req)
+
+struct ast_dma_desc {
+	u32	des_0;
+	u32	des_1;
+};
+
+struct ast_udc_ep {
+	struct usb_ep			ep;
+
+	/* Request queue */
+	struct list_head		queue;
+
+	struct ast_udc_dev		*udc;
+	void __iomem			*ep_reg;
+	void				*epn_buf;
+	dma_addr_t			epn_buf_dma;
+	const struct usb_endpoint_descriptor	*desc;
+
+	/* DMA Descriptors */
+	struct ast_dma_desc		*descs;
+	dma_addr_t			descs_dma;
+	u32				descs_wptr;
+	u32				chunk_max;
+
+	bool				dir_in:1;
+	unsigned			stopped:1;
+	bool				desc_mode:1;
+};
+
+#define to_ast_ep(__ep) container_of(__ep, struct ast_udc_ep, ep)
+
+struct ast_udc_dev {
+	struct platform_device		*pdev;
+	void __iomem			*reg;
+	int				irq;
+	spinlock_t			lock;
+	struct clk			*clk;
+	struct work_struct		wake_work;
+
+	/* EP0 DMA buffers allocated in one chunk */
+	void				*ep0_buf;
+	dma_addr_t			ep0_buf_dma;
+	struct ast_udc_ep		ep[AST_UDC_NUM_ENDPOINTS];
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	void __iomem			*creq;
+	enum usb_device_state		suspended_from;
+	int				desc_mode;
+
+	/* Force full speed only */
+	bool				force_usb1:1;
+	unsigned			is_control_tx:1;
+	bool				wakeup_en:1;
+};
+
+#define to_ast_dev(__g) container_of(__g, struct ast_udc_dev, gadget)
+
+static const char * const ast_ep_name[] = {
+	"ep0", "ep1", "ep2", "ep3", "ep4"
+};
+
+#ifdef AST_UDC_DEBUG_ALL
+#define AST_UDC_DEBUG
+#define AST_SETUP_DEBUG
+#define AST_EP_DEBUG
+#define AST_ISR_DEBUG
+#endif
+
+#ifdef AST_SETUP_DEBUG
+#define SETUP_DBG(u, fmt, ...)	\
+	dev_dbg(&(u)->pdev->dev, "%s() " fmt, __func__, ##__VA_ARGS__)
+#else
+#define SETUP_DBG(u, fmt, ...)
+#endif
+
+#ifdef AST_EP_DEBUG
+#define EP_DBG(e, fmt, ...)	\
+	dev_dbg(&(e)->udc->pdev->dev, "%s():%s " fmt, __func__,	\
+		 (e)->ep.name, ##__VA_ARGS__)
+#else
+#define EP_DBG(ep, fmt, ...)	((void)(ep))
+#endif
+
+#ifdef AST_UDC_DEBUG
+#define UDC_DBG(u, fmt, ...)	\
+	dev_dbg(&(u)->pdev->dev, "%s() " fmt, __func__, ##__VA_ARGS__)
+#else
+#define UDC_DBG(u, fmt, ...)
+#endif
+
+#ifdef AST_ISR_DEBUG
+#define ISR_DBG(u, fmt, ...)	\
+	dev_dbg(&(u)->pdev->dev, "%s() " fmt, __func__, ##__VA_ARGS__)
+#else
+#define ISR_DBG(u, fmt, ...)
+#endif
+
+/*-------------------------------------------------------------------------*/
+#define ast_udc_read(udc, offset) \
+	readl((udc)->reg + (offset))
+#define ast_udc_write(udc, val, offset) \
+	writel((val), (udc)->reg + (offset))
+
+#define ast_ep_read(ep, reg) \
+	readl((ep)->ep_reg + (reg))
+#define ast_ep_write(ep, val, reg) \
+	writel((val), (ep)->ep_reg + (reg))
+
+/*-------------------------------------------------------------------------*/
+
+static void ast_udc_done(struct ast_udc_ep *ep, struct ast_udc_request *req,
+			 int status)
+{
+	struct ast_udc_dev *udc = ep->udc;
+
+	EP_DBG(ep, "req @%p, len (%d/%d), buf:0x%x, dir:0x%x\n",
+	       req, req->req.actual, req->req.length,
+	       (u32)req->req.buf, ep->dir_in);
+
+	list_del(&req->queue);
+
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	if (status && status != -ESHUTDOWN)
+		EP_DBG(ep, "done req:%p, status:%d\n", req, status);
+
+	spin_unlock(&udc->lock);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&udc->lock);
+}
+
+static void ast_udc_nuke(struct ast_udc_ep *ep, int status)
+{
+	int count = 0;
+
+	while (!list_empty(&ep->queue)) {
+		struct ast_udc_request *req;
+
+		req = list_entry(ep->queue.next, struct ast_udc_request,
+				 queue);
+		ast_udc_done(ep, req, status);
+		count++;
+	}
+
+	if (count)
+		EP_DBG(ep, "Nuked %d request(s)\n", count);
+}
+
+/*
+ * Stop activity on all endpoints.
+ * Device controller for which EP activity is to be stopped.
+ *
+ * All the endpoints are stopped and any pending transfer requests if any on
+ * the endpoint are terminated.
+ */
+static void ast_udc_stop_activity(struct ast_udc_dev *udc)
+{
+	struct ast_udc_ep *ep;
+	int i;
+
+	for (i = 0; i < AST_UDC_NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+		ep->stopped = 1;
+		ast_udc_nuke(ep, -ESHUTDOWN);
+	}
+}
+
+static int ast_udc_ep_enable(struct usb_ep *_ep,
+			     const struct usb_endpoint_descriptor *desc)
+{
+	u16 maxpacket = usb_endpoint_maxp(desc);
+	struct ast_udc_ep *ep = to_ast_ep(_ep);
+	struct ast_udc_dev *udc = ep->udc;
+	u8 epnum = usb_endpoint_num(desc);
+	unsigned long flags;
+	u32 ep_conf = 0;
+	u8 dir_in;
+	u8 type;
+
+	if (!_ep || !ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT ||
+	    maxpacket == 0 || maxpacket > ep->ep.maxpacket) {
+		EP_DBG(ep, "Failed, invalid EP enable param\n");
+		return -EINVAL;
+	}
+
+	if (!udc->driver) {
+		EP_DBG(ep, "bogus device state\n");
+		return -ESHUTDOWN;
+	}
+
+	EP_DBG(ep, "maxpacket:0x%x\n", maxpacket);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	ep->desc = desc;
+	ep->stopped = 0;
+	ep->ep.maxpacket = maxpacket;
+	ep->chunk_max = AST_EP_DMA_DESC_MAX_LEN;
+
+	if (maxpacket < AST_UDC_EPn_MAX_PACKET)
+		ep_conf = EP_SET_MAX_PKT(maxpacket);
+
+	ep_conf |= EP_SET_EP_NUM(epnum);
+
+	type = usb_endpoint_type(desc);
+	dir_in = usb_endpoint_dir_in(desc);
+	ep->dir_in = dir_in;
+	if (!ep->dir_in)
+		ep_conf |= EP_DIR_OUT;
+
+	EP_DBG(ep, "type %d, dir_in %d\n", type, dir_in);
+	switch (type) {
+	case USB_ENDPOINT_XFER_ISOC:
+		ep_conf |= EP_SET_TYPE_MASK(EP_TYPE_ISO);
+		break;
+
+	case USB_ENDPOINT_XFER_BULK:
+		ep_conf |= EP_SET_TYPE_MASK(EP_TYPE_BULK);
+		break;
+
+	case USB_ENDPOINT_XFER_INT:
+		ep_conf |= EP_SET_TYPE_MASK(EP_TYPE_INT);
+		break;
+	}
+
+	ep->desc_mode = udc->desc_mode && ep->descs_dma && ep->dir_in;
+	if (ep->desc_mode) {
+		ast_ep_write(ep, EP_DMA_CTRL_RESET, AST_UDC_EP_DMA_CTRL);
+		ast_ep_write(ep, 0, AST_UDC_EP_DMA_STS);
+		ast_ep_write(ep, ep->descs_dma, AST_UDC_EP_DMA_BUFF);
+
+		/* Enable Long Descriptor Mode */
+		ast_ep_write(ep, EP_DMA_CTRL_IN_LONG_MODE | EP_DMA_DESC_MODE,
+			     AST_UDC_EP_DMA_CTRL);
+
+		ep->descs_wptr = 0;
+
+	} else {
+		ast_ep_write(ep, EP_DMA_CTRL_RESET, AST_UDC_EP_DMA_CTRL);
+		ast_ep_write(ep, EP_DMA_SINGLE_STAGE, AST_UDC_EP_DMA_CTRL);
+		ast_ep_write(ep, 0, AST_UDC_EP_DMA_STS);
+	}
+
+	/* Cleanup data toggle just in case */
+	ast_udc_write(udc, EP_TOGGLE_SET_EPNUM(epnum), AST_VHUB_EP_DATA);
+
+	/* Enable EP */
+	ast_ep_write(ep, ep_conf | EP_ENABLE, AST_UDC_EP_CONFIG);
+
+	EP_DBG(ep, "ep_config: 0x%x\n", ast_ep_read(ep, AST_UDC_EP_CONFIG));
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int ast_udc_ep_disable(struct usb_ep *_ep)
+{
+	struct ast_udc_ep *ep = to_ast_ep(_ep);
+	struct ast_udc_dev *udc = ep->udc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	ep->ep.desc = NULL;
+	ep->stopped = 1;
+
+	ast_udc_nuke(ep, -ESHUTDOWN);
+	ast_ep_write(ep, 0, AST_UDC_EP_CONFIG);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static struct usb_request *ast_udc_ep_alloc_request(struct usb_ep *_ep,
+						    gfp_t gfp_flags)
+{
+	struct ast_udc_ep *ep = to_ast_ep(_ep);
+	struct ast_udc_request *req;
+
+	req = kzalloc(sizeof(struct ast_udc_request), gfp_flags);
+	if (!req) {
+		EP_DBG(ep, "request allocation failed\n");
+		return NULL;
+	}
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void ast_udc_ep_free_request(struct usb_ep *_ep,
+				    struct usb_request *_req)
+{
+	struct ast_udc_request *req = to_ast_req(_req);
+
+	kfree(req);
+}
+
+static int ast_dma_descriptor_setup(struct ast_udc_ep *ep, u32 dma_buf,
+				    u16 tx_len, struct ast_udc_request *req)
+{
+	struct ast_udc_dev *udc = ep->udc;
+	struct device *dev = &udc->pdev->dev;
+	bool last = false;
+	int chunk, count;
+	u32 offset;
+
+	if (!ep->descs) {
+		dev_warn(dev, "%s: Empty DMA descs list failure\n",
+			 ep->ep.name);
+		return -EINVAL;
+	}
+
+	chunk = tx_len;
+	offset = count = 0;
+
+	EP_DBG(ep, "req @%p, %s:%d, %s:0x%x, %s:0x%x\n", req,
+	       "wptr", ep->descs_wptr, "dma_buf", dma_buf,
+	       "tx_len", tx_len);
+
+	/* Create Descriptor Lists */
+	while (chunk >= 0 && !last && count < AST_UDC_DESCS_COUNT) {
+
+		ep->descs[ep->descs_wptr].des_0 = dma_buf + offset;
+
+		if (chunk > ep->chunk_max) {
+			ep->descs[ep->descs_wptr].des_1 = ep->chunk_max;
+		} else {
+			ep->descs[ep->descs_wptr].des_1 = chunk;
+			last = true;
+		}
+
+		chunk -= ep->chunk_max;
+
+		EP_DBG(ep, "descs[%d]: 0x%x 0x%x\n",
+		       ep->descs_wptr,
+		       ep->descs[ep->descs_wptr].des_0,
+		       ep->descs[ep->descs_wptr].des_1);
+
+		if (count == 0)
+			req->saved_dma_wptr = ep->descs_wptr;
+
+		ep->descs_wptr++;
+		count++;
+
+		if (ep->descs_wptr >= AST_UDC_DESCS_COUNT)
+			ep->descs_wptr = 0;
+
+		offset = ep->chunk_max * count;
+	}
+
+	return 0;
+}
+
+static void ast_udc_epn_kick(struct ast_udc_ep *ep, struct ast_udc_request *req)
+{
+	u32 tx_len;
+	u32 last;
+
+	last = req->req.length - req->req.actual;
+	tx_len = last > ep->ep.maxpacket ? ep->ep.maxpacket : last;
+
+	EP_DBG(ep, "kick req @%p, len:%d, dir:%d\n",
+	       req, tx_len, ep->dir_in);
+
+	ast_ep_write(ep, req->req.dma + req->req.actual, AST_UDC_EP_DMA_BUFF);
+
+	/* Start DMA */
+	ast_ep_write(ep, EP_DMA_SET_TX_SIZE(tx_len), AST_UDC_EP_DMA_STS);
+	ast_ep_write(ep, EP_DMA_SET_TX_SIZE(tx_len) | EP_DMA_SINGLE_KICK,
+		     AST_UDC_EP_DMA_STS);
+}
+
+static void ast_udc_epn_kick_desc(struct ast_udc_ep *ep,
+				  struct ast_udc_request *req)
+{
+	u32 descs_max_size;
+	u32 tx_len;
+	u32 last;
+
+	descs_max_size = AST_EP_DMA_DESC_MAX_LEN * AST_UDC_DESCS_COUNT;
+
+	last = req->req.length - req->req.actual;
+	tx_len = last > descs_max_size ? descs_max_size : last;
+
+	EP_DBG(ep, "kick req @%p, %s:%d, %s:0x%x, %s:0x%x (%d/%d), %s:0x%x\n",
+	       req, "tx_len", tx_len, "dir_in", ep->dir_in,
+	       "dma", req->req.dma + req->req.actual,
+	       req->req.actual, req->req.length,
+	       "descs_max_size", descs_max_size);
+
+	if (!ast_dma_descriptor_setup(ep, req->req.dma + req->req.actual,
+				      tx_len, req))
+		req->actual_dma_length += tx_len;
+
+	/* make sure CPU done everything before triggering DMA */
+	mb();
+
+	ast_ep_write(ep, ep->descs_wptr, AST_UDC_EP_DMA_STS);
+
+	EP_DBG(ep, "descs_wptr:%d, dstat:0x%x, dctrl:0x%x\n",
+	       ep->descs_wptr,
+	       ast_ep_read(ep, AST_UDC_EP_DMA_STS),
+	       ast_ep_read(ep, AST_UDC_EP_DMA_CTRL));
+}
+
+static void ast_udc_ep0_queue(struct ast_udc_ep *ep,
+			      struct ast_udc_request *req)
+{
+	struct ast_udc_dev *udc = ep->udc;
+	u32 tx_len;
+	u32 last;
+
+	last = req->req.length - req->req.actual;
+	tx_len = last > ep->ep.maxpacket ? ep->ep.maxpacket : last;
+
+	ast_udc_write(udc, req->req.dma + req->req.actual,
+		      AST_UDC_EP0_DATA_BUFF);
+
+	if (ep->dir_in) {
+		/* IN requests, send data */
+		SETUP_DBG(udc, "IN: %s:0x%x, %s:0x%x, %s:%d (%d/%d), %s:%d\n",
+			  "buf", (u32)req->req.buf,
+			  "dma", req->req.dma + req->req.actual,
+			  "tx_len", tx_len,
+			  req->req.actual, req->req.length,
+			  "dir_in", ep->dir_in);
+
+		req->req.actual += tx_len;
+		ast_udc_write(udc, EP0_TX_LEN(tx_len), AST_UDC_EP0_CTRL);
+		ast_udc_write(udc, EP0_TX_LEN(tx_len) | EP0_TX_BUFF_RDY,
+			      AST_UDC_EP0_CTRL);
+
+	} else {
+		/* OUT requests, receive data */
+		SETUP_DBG(udc, "OUT: %s:%x, %s:%x, %s:(%d/%d), %s:%d\n",
+			  "buf", (u32)req->req.buf,
+			  "dma", req->req.dma + req->req.actual,
+			  "len", req->req.actual, req->req.length,
+			  "dir_in", ep->dir_in);
+
+		if (!req->req.length) {
+			/* 0 len request, send tx as completion */
+			ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL);
+			ep->dir_in = 0x1;
+		} else
+			ast_udc_write(udc, EP0_RX_BUFF_RDY, AST_UDC_EP0_CTRL);
+	}
+}
+
+static int ast_udc_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+			    gfp_t gfp_flags)
+{
+	struct ast_udc_request *req = to_ast_req(_req);
+	struct ast_udc_ep *ep = to_ast_ep(_ep);
+	struct ast_udc_dev *udc = ep->udc;
+	struct device *dev = &udc->pdev->dev;
+	unsigned long flags;
+	int rc;
+
+	if (unlikely(!_req || !_req->complete || !_req->buf || !_ep)) {
+		dev_warn(dev, "Invalid EP request !\n");
+		return -EINVAL;
+	}
+
+	if (ep->stopped) {
+		dev_warn(dev, "%s is already stopped !\n", _ep->name);
+		return -ESHUTDOWN;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	list_add_tail(&req->queue, &ep->queue);
+
+	req->req.actual = 0;
+	req->req.status = -EINPROGRESS;
+	req->actual_dma_length = 0;
+
+	rc = usb_gadget_map_request(&udc->gadget, &req->req, ep->dir_in);
+	if (rc) {
+		EP_DBG(ep, "Request mapping failure %d\n", rc);
+		dev_warn(dev, "Request mapping failure %d\n", rc);
+		goto end;
+	}
+
+	EP_DBG(ep, "enqueue req @%p\n", req);
+	EP_DBG(ep, "l=%d, dma:0x%x, zero:%d, is_in:%d\n",
+		_req->length, _req->dma, _req->zero, ep->dir_in);
+
+	/* EP0 request enqueue */
+	if (ep->ep.desc == NULL) {
+		if ((req->req.dma % 4) != 0) {
+			dev_warn(dev, "EP0 req dma alignment error\n");
+			rc = -ESHUTDOWN;
+			goto end;
+		}
+
+		ast_udc_ep0_queue(ep, req);
+		goto end;
+	}
+
+	/* EPn request enqueue */
+	if (list_is_singular(&ep->queue)) {
+		if (ep->desc_mode)
+			ast_udc_epn_kick_desc(ep, req);
+		else
+			ast_udc_epn_kick(ep, req);
+	}
+
+end:
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return rc;
+}
+
+static int ast_udc_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct ast_udc_ep *ep = to_ast_ep(_ep);
+	struct ast_udc_dev *udc = ep->udc;
+	struct ast_udc_request *req;
+	unsigned long flags;
+	int rc = 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == _req) {
+			list_del_init(&req->queue);
+			ast_udc_done(ep, req, -ESHUTDOWN);
+			_req->status = -ECONNRESET;
+			break;
+		}
+	}
+
+	/* dequeue request not found */
+	if (&req->req != _req)
+		rc = -EINVAL;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return rc;
+}
+
+static int ast_udc_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	struct ast_udc_ep *ep = to_ast_ep(_ep);
+	struct ast_udc_dev *udc = ep->udc;
+	unsigned long flags;
+	int epnum;
+	u32 ctrl;
+
+	EP_DBG(ep, "val:%d\n", value);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	epnum = usb_endpoint_num(ep->desc);
+
+	/* EP0 */
+	if (epnum == 0) {
+		ctrl = ast_udc_read(udc, AST_UDC_EP0_CTRL);
+		if (value)
+			ctrl |= EP0_STALL;
+		else
+			ctrl &= ~EP0_STALL;
+
+		ast_udc_write(udc, ctrl, AST_UDC_EP0_CTRL);
+
+	} else {
+	/* EPn */
+		ctrl = ast_udc_read(udc, AST_UDC_EP_CONFIG);
+		if (value)
+			ctrl |= EP_SET_EP_STALL;
+		else
+			ctrl &= ~EP_SET_EP_STALL;
+
+		ast_ep_write(ep, ctrl, AST_UDC_EP_CONFIG);
+
+		/* only epn is stopped and waits for clear */
+		ep->stopped = value ? 1 : 0;
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_ep_ops ast_udc_ep_ops = {
+	.enable		= ast_udc_ep_enable,
+	.disable	= ast_udc_ep_disable,
+	.alloc_request	= ast_udc_ep_alloc_request,
+	.free_request	= ast_udc_ep_free_request,
+	.queue		= ast_udc_ep_queue,
+	.dequeue	= ast_udc_ep_dequeue,
+	.set_halt	= ast_udc_ep_set_halt,
+	/* there's only imprecise fifo status reporting */
+};
+
+static void ast_udc_ep0_rx(struct ast_udc_dev *udc)
+{
+	ast_udc_write(udc, udc->ep0_buf_dma, AST_UDC_EP0_DATA_BUFF);
+	ast_udc_write(udc, EP0_RX_BUFF_RDY, AST_UDC_EP0_CTRL);
+}
+
+static void ast_udc_ep0_tx(struct ast_udc_dev *udc)
+{
+	ast_udc_write(udc, udc->ep0_buf_dma, AST_UDC_EP0_DATA_BUFF);
+	ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL);
+}
+
+static void ast_udc_ep0_out(struct ast_udc_dev *udc)
+{
+	struct device *dev = &udc->pdev->dev;
+	struct ast_udc_ep *ep = &udc->ep[0];
+	struct ast_udc_request *req;
+	u16 rx_len;
+
+	if (list_empty(&ep->queue))
+		return;
+
+	req = list_entry(ep->queue.next, struct ast_udc_request, queue);
+
+	rx_len = EP0_GET_RX_LEN(ast_udc_read(udc, AST_UDC_EP0_CTRL));
+	req->req.actual += rx_len;
+
+	SETUP_DBG(udc, "req %p (%d/%d)\n", req,
+		  req->req.actual, req->req.length);
+
+	if ((rx_len < ep->ep.maxpacket) ||
+	    (req->req.actual == req->req.length)) {
+		ast_udc_ep0_tx(udc);
+		if (!ep->dir_in)
+			ast_udc_done(ep, req, 0);
+
+	} else {
+		if (rx_len > req->req.length) {
+			// Issue Fix
+			dev_warn(dev, "Something wrong (%d/%d)\n",
+				 req->req.actual, req->req.length);
+			ast_udc_ep0_tx(udc);
+			ast_udc_done(ep, req, 0);
+			return;
+		}
+
+		ep->dir_in = 0;
+
+		/* More works */
+		ast_udc_ep0_queue(ep, req);
+	}
+}
+
+static void ast_udc_ep0_in(struct ast_udc_dev *udc)
+{
+	struct ast_udc_ep *ep = &udc->ep[0];
+	struct ast_udc_request *req;
+
+	if (list_empty(&ep->queue)) {
+		if (udc->is_control_tx) {
+			ast_udc_ep0_rx(udc);
+			udc->is_control_tx = 0;
+		}
+
+		return;
+	}
+
+	req = list_entry(ep->queue.next, struct ast_udc_request, queue);
+
+	SETUP_DBG(udc, "req %p (%d/%d)\n", req,
+		  req->req.actual, req->req.length);
+
+	if (req->req.length == req->req.actual) {
+		if (req->req.length)
+			ast_udc_ep0_rx(udc);
+
+		if (ep->dir_in)
+			ast_udc_done(ep, req, 0);
+
+	} else {
+		/* More works */
+		ast_udc_ep0_queue(ep, req);
+	}
+}
+
+static void ast_udc_epn_handle(struct ast_udc_dev *udc, u16 ep_num)
+{
+	struct ast_udc_ep *ep = &udc->ep[ep_num];
+	struct ast_udc_request *req;
+	u16 len = 0;
+
+	if (list_empty(&ep->queue))
+		return;
+
+	req = list_first_entry(&ep->queue, struct ast_udc_request, queue);
+
+	len = EP_DMA_GET_TX_SIZE(ast_ep_read(ep, AST_UDC_EP_DMA_STS));
+	req->req.actual += len;
+
+	EP_DBG(ep, "req @%p, length:(%d/%d), %s:0x%x\n", req,
+		req->req.actual, req->req.length, "len", len);
+
+	/* Done this request */
+	if (req->req.length == req->req.actual) {
+		ast_udc_done(ep, req, 0);
+		req = list_first_entry_or_null(&ep->queue,
+					       struct ast_udc_request,
+					       queue);
+
+	} else {
+		/* Check for short packet */
+		if (len < ep->ep.maxpacket) {
+			ast_udc_done(ep, req, 0);
+			req = list_first_entry_or_null(&ep->queue,
+						       struct ast_udc_request,
+						       queue);
+		}
+	}
+
+	/* More requests */
+	if (req)
+		ast_udc_epn_kick(ep, req);
+}
+
+static void ast_udc_epn_handle_desc(struct ast_udc_dev *udc, u16 ep_num)
+{
+	struct ast_udc_ep *ep = &udc->ep[ep_num];
+	struct device *dev = &udc->pdev->dev;
+	struct ast_udc_request *req;
+	u32 proc_sts, wr_ptr, rd_ptr;
+	u32 len_in_desc, ctrl;
+	u16 total_len = 0;
+	int i;
+
+	if (list_empty(&ep->queue)) {
+		dev_warn(dev, "%s request queue empty!\n", ep->ep.name);
+		return;
+	}
+
+	req = list_first_entry(&ep->queue, struct ast_udc_request, queue);
+
+	ctrl = ast_ep_read(ep, AST_UDC_EP_DMA_CTRL);
+	proc_sts = EP_DMA_CTRL_GET_PROC_STS(ctrl);
+
+	/* Check processing status is idle */
+	if (proc_sts != EP_DMA_CTRL_STS_RX_IDLE &&
+	    proc_sts != EP_DMA_CTRL_STS_TX_IDLE) {
+		dev_warn(dev, "EP DMA CTRL: 0x%x, PS:0x%x\n",
+			 ast_ep_read(ep, AST_UDC_EP_DMA_CTRL),
+			 proc_sts);
+		return;
+	}
+
+	ctrl = ast_ep_read(ep, AST_UDC_EP_DMA_STS);
+	rd_ptr = EP_DMA_GET_RPTR(ctrl);
+	wr_ptr = EP_DMA_GET_WPTR(ctrl);
+
+	if (rd_ptr != wr_ptr) {
+		dev_warn(dev, "desc list is not empty ! %s:%d, %s:%d\n",
+		"rptr", rd_ptr, "wptr", wr_ptr);
+		return;
+	}
+
+	EP_DBG(ep, "rd_ptr:%d, wr_ptr:%d\n", rd_ptr, wr_ptr);
+	i = req->saved_dma_wptr;
+
+	do {
+		len_in_desc = EP_DESC1_IN_LEN(ep->descs[i].des_1);
+		EP_DBG(ep, "desc[%d] len: %d\n", i, len_in_desc);
+		total_len += len_in_desc;
+		i++;
+		if (i >= AST_UDC_DESCS_COUNT)
+			i = 0;
+
+	} while (i != wr_ptr);
+
+	req->req.actual += total_len;
+
+	EP_DBG(ep, "req @%p, length:(%d/%d), %s:0x%x\n", req,
+		req->req.actual, req->req.length, "len", total_len);
+
+	/* Done this request */
+	if (req->req.length == req->req.actual) {
+		ast_udc_done(ep, req, 0);
+		req = list_first_entry_or_null(&ep->queue,
+					       struct ast_udc_request,
+					       queue);
+
+	} else {
+		/* Check for short packet */
+		if (total_len < ep->ep.maxpacket) {
+			ast_udc_done(ep, req, 0);
+			req = list_first_entry_or_null(&ep->queue,
+						       struct ast_udc_request,
+						       queue);
+		}
+	}
+
+	/* More requests & dma descs not setup yet */
+	if (req && (req->actual_dma_length == req->req.actual)) {
+		EP_DBG(ep, "More requests\n");
+		ast_udc_epn_kick_desc(ep, req);
+	}
+}
+
+static void ast_udc_ep0_data_tx(struct ast_udc_dev *udc, u8 *tx_data, u32 len)
+{
+	if (len) {
+		memcpy(udc->ep0_buf, tx_data, len);
+
+		ast_udc_write(udc, udc->ep0_buf_dma, AST_UDC_EP0_DATA_BUFF);
+		ast_udc_write(udc, EP0_TX_LEN(len), AST_UDC_EP0_CTRL);
+		ast_udc_write(udc, EP0_TX_LEN(len) | EP0_TX_BUFF_RDY,
+			      AST_UDC_EP0_CTRL);
+		udc->is_control_tx = 1;
+
+	} else
+		ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL);
+}
+
+static void ast_udc_getstatus(struct ast_udc_dev *udc)
+{
+	struct usb_ctrlrequest crq;
+	struct ast_udc_ep *ep;
+	u16 status = 0;
+	u16 epnum = 0;
+
+	memcpy_fromio(&crq, udc->creq, sizeof(crq));
+
+	switch (crq.bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		/* Get device status */
+		status = 1 << USB_DEVICE_SELF_POWERED;
+		break;
+	case USB_RECIP_INTERFACE:
+		break;
+	case USB_RECIP_ENDPOINT:
+		epnum = crq.wIndex & USB_ENDPOINT_NUMBER_MASK;
+		status = udc->ep[epnum].stopped;
+		break;
+	default:
+		goto stall;
+	}
+
+	ep = &udc->ep[epnum];
+	EP_DBG(ep, "status: 0x%x\n", status);
+	ast_udc_ep0_data_tx(udc, (u8 *)&status, sizeof(status));
+
+	return;
+
+stall:
+	EP_DBG(ep, "Can't respond request\n");
+	ast_udc_write(udc, ast_udc_read(udc, AST_UDC_EP0_CTRL) | EP0_STALL,
+		      AST_UDC_EP0_CTRL);
+}
+
+static void ast_udc_ep0_handle_setup(struct ast_udc_dev *udc)
+{
+	struct ast_udc_ep *ep = &udc->ep[0];
+	struct ast_udc_request *req;
+	struct usb_ctrlrequest crq;
+	int req_num = 0;
+	int rc = 0;
+	u32 reg;
+
+	memcpy_fromio(&crq, udc->creq, sizeof(crq));
+
+	SETUP_DBG(udc, "SETUP packet: %02x/%02x/%04x/%04x/%04x\n",
+		  crq.bRequestType, crq.bRequest, le16_to_cpu(crq.wValue),
+		  le16_to_cpu(crq.wIndex), le16_to_cpu(crq.wLength));
+
+	/*
+	 * Cleanup ep0 request(s) in queue because
+	 * there is a new control setup comes.
+	 */
+	list_for_each_entry(req, &udc->ep[0].queue, queue) {
+		req_num++;
+		EP_DBG(ep, "there is req %p in ep0 queue !\n", req);
+	}
+
+	if (req_num)
+		ast_udc_nuke(&udc->ep[0], -ETIMEDOUT);
+
+	udc->ep[0].dir_in = crq.bRequestType & USB_DIR_IN;
+
+	if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (crq.bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			if (ast_udc_read(udc, AST_UDC_STS) & UDC_STS_HIGHSPEED)
+				udc->gadget.speed = USB_SPEED_HIGH;
+			else
+				udc->gadget.speed = USB_SPEED_FULL;
+
+			SETUP_DBG(udc, "set addr: 0x%x\n", crq.wValue);
+			reg = ast_udc_read(udc, AST_UDC_CONFIG);
+			reg &= ~UDC_CFG_ADDR_MASK;
+			reg |= UDC_CFG_SET_ADDR(crq.wValue);
+			ast_udc_write(udc, reg, AST_UDC_CONFIG);
+			goto req_complete;
+
+		case USB_REQ_CLEAR_FEATURE:
+			SETUP_DBG(udc, "ep0: CLEAR FEATURE\n");
+			goto req_driver;
+
+		case USB_REQ_SET_FEATURE:
+			SETUP_DBG(udc, "ep0: SET FEATURE\n");
+			goto req_driver;
+
+		case USB_REQ_GET_STATUS:
+			ast_udc_getstatus(udc);
+			return;
+
+		default:
+			goto req_driver;
+		}
+
+	}
+
+req_driver:
+	if (udc->driver) {
+		SETUP_DBG(udc, "Forwarding %s to gadget...\n",
+			  udc->gadget.name);
+
+		spin_unlock(&udc->lock);
+		rc = udc->driver->setup(&udc->gadget, &crq);
+		spin_lock(&udc->lock);
+
+	} else {
+		SETUP_DBG(udc, "No gadget for request !\n");
+	}
+
+	if (rc >= 0)
+		return;
+
+	/* Stall if gadget failed */
+	SETUP_DBG(udc, "Stalling, rc:0x%x\n", rc);
+	ast_udc_write(udc, ast_udc_read(udc, AST_UDC_EP0_CTRL) | EP0_STALL,
+		      AST_UDC_EP0_CTRL);
+	return;
+
+req_complete:
+	SETUP_DBG(udc, "ep0: Sending IN status without data\n");
+	ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL);
+}
+
+static irqreturn_t ast_udc_isr(int irq, void *data)
+{
+	struct ast_udc_dev *udc = (struct ast_udc_dev *)data;
+	struct ast_udc_ep *ep;
+	u32 isr, ep_isr;
+	int i;
+
+	spin_lock(&udc->lock);
+
+	isr = ast_udc_read(udc, AST_UDC_ISR);
+	if (!isr)
+		goto done;
+
+	/* Ack interrupts */
+	ast_udc_write(udc, isr, AST_UDC_ISR);
+
+	if (isr & UDC_IRQ_BUS_RESET) {
+		ISR_DBG(udc, "UDC_IRQ_BUS_RESET\n");
+		udc->gadget.speed = USB_SPEED_UNKNOWN;
+
+		ep = &udc->ep[1];
+		EP_DBG(ep, "dctrl:0x%x\n",
+		       ast_ep_read(ep, AST_UDC_EP_DMA_CTRL));
+
+		if (udc->driver && udc->driver->reset) {
+			spin_unlock(&udc->lock);
+			udc->driver->reset(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+
+	if (isr & UDC_IRQ_BUS_SUSPEND) {
+		ISR_DBG(udc, "UDC_IRQ_BUS_SUSPEND\n");
+		udc->suspended_from = udc->gadget.state;
+		usb_gadget_set_state(&udc->gadget, USB_STATE_SUSPENDED);
+
+		if (udc->driver && udc->driver->suspend) {
+			spin_unlock(&udc->lock);
+			udc->driver->suspend(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+
+	if (isr & UDC_IRQ_BUS_RESUME) {
+		ISR_DBG(udc, "UDC_IRQ_BUS_RESUME\n");
+		usb_gadget_set_state(&udc->gadget, udc->suspended_from);
+
+		if (udc->driver && udc->driver->resume) {
+			spin_unlock(&udc->lock);
+			udc->driver->resume(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+
+	if (isr & UDC_IRQ_EP0_IN_ACK_STALL) {
+		ISR_DBG(udc, "UDC_IRQ_EP0_IN_ACK_STALL\n");
+		ast_udc_ep0_in(udc);
+	}
+
+	if (isr & UDC_IRQ_EP0_OUT_ACK_STALL) {
+		ISR_DBG(udc, "UDC_IRQ_EP0_OUT_ACK_STALL\n");
+		ast_udc_ep0_out(udc);
+	}
+
+	if (isr & UDC_IRQ_EP0_SETUP) {
+		ISR_DBG(udc, "UDC_IRQ_EP0_SETUP\n");
+		ast_udc_ep0_handle_setup(udc);
+	}
+
+	if (isr & UDC_IRQ_EP_POOL_ACK_STALL) {
+		ISR_DBG(udc, "UDC_IRQ_EP_POOL_ACK_STALL\n");
+		ep_isr = ast_udc_read(udc, AST_UDC_EP_ACK_ISR);
+
+		/* Ack EP interrupts */
+		ast_udc_write(udc, ep_isr, AST_UDC_EP_ACK_ISR);
+
+		/* Handle each EP */
+		for (i = 0; i < AST_UDC_NUM_ENDPOINTS - 1; i++) {
+			if (ep_isr & (0x1 << i)) {
+				ep = &udc->ep[i + 1];
+				if (ep->desc_mode)
+					ast_udc_epn_handle_desc(udc, i + 1);
+				else
+					ast_udc_epn_handle(udc, i + 1);
+			}
+		}
+	}
+
+done:
+	spin_unlock(&udc->lock);
+	return IRQ_HANDLED;
+}
+
+static int ast_udc_gadget_getframe(struct usb_gadget *gadget)
+{
+	struct ast_udc_dev *udc = to_ast_dev(gadget);
+
+	return (ast_udc_read(udc, AST_UDC_STS) >> 16) & 0x7ff;
+}
+
+static void ast_udc_wake_work(struct work_struct *work)
+{
+	struct ast_udc_dev *udc = container_of(work, struct ast_udc_dev,
+					       wake_work);
+	unsigned long flags;
+	u32 ctrl;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	UDC_DBG(udc, "Wakeup Host !\n");
+	ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL);
+	ast_udc_write(udc, ctrl | USB_REMOTE_WAKEUP_EN, AST_UDC_FUNC_CTRL);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+static void ast_udc_wakeup_all(struct ast_udc_dev *udc)
+{
+	/*
+	 * A device is trying to wake the world, because this
+	 * can recurse into the device, we break the call chain
+	 * using a work queue
+	 */
+	schedule_work(&udc->wake_work);
+}
+
+static int ast_udc_wakeup(struct usb_gadget *gadget)
+{
+	struct ast_udc_dev *udc = to_ast_dev(gadget);
+	unsigned long flags;
+	int rc = 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (!udc->wakeup_en) {
+		UDC_DBG(udc, "Remote Wakeup is disabled\n");
+		rc = -EINVAL;
+		goto err;
+	}
+
+	UDC_DBG(udc, "Device initiated wakeup\n");
+	ast_udc_wakeup_all(udc);
+
+err:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return rc;
+}
+
+/*
+ * Activate/Deactivate link with host
+ */
+static int ast_udc_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct ast_udc_dev *udc = to_ast_dev(gadget);
+	unsigned long flags;
+	u32 ctrl;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	UDC_DBG(udc, "is_on: %d\n", is_on);
+	if (is_on)
+		ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) | USB_UPSTREAM_EN;
+	else
+		ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) & ~USB_UPSTREAM_EN;
+
+	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int ast_udc_start(struct usb_gadget *gadget,
+			 struct usb_gadget_driver *driver)
+{
+	struct ast_udc_dev *udc = to_ast_dev(gadget);
+	struct ast_udc_ep *ep;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	UDC_DBG(udc, "\n");
+	udc->driver = driver;
+	udc->gadget.dev.of_node = udc->pdev->dev.of_node;
+
+	for (i = 0; i < AST_UDC_NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+		ep->stopped = 0;
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int ast_udc_stop(struct usb_gadget *gadget)
+{
+	struct ast_udc_dev *udc = to_ast_dev(gadget);
+	unsigned long flags;
+	u32 ctrl;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	UDC_DBG(udc, "\n");
+	ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) & ~USB_UPSTREAM_EN;
+	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
+
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->driver = NULL;
+
+	ast_udc_stop_activity(udc);
+	usb_gadget_set_state(&udc->gadget, USB_STATE_NOTATTACHED);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops ast_udc_ops = {
+	.get_frame		= ast_udc_gadget_getframe,
+	.wakeup			= ast_udc_wakeup,
+	.pullup			= ast_udc_pullup,
+	.udc_start		= ast_udc_start,
+	.udc_stop		= ast_udc_stop,
+};
+
+/*
+ * Support 1 Control Endpoint.
+ * Support multiple programmable endpoints that can be configured to
+ * Bulk IN/OUT, Interrupt IN/OUT, and Isochronous IN/OUT type endpoint.
+ */
+static void ast_udc_init_ep(struct ast_udc_dev *udc)
+{
+	struct ast_udc_ep *ep;
+	int i;
+
+	for (i = 0; i < AST_UDC_NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+		ep->ep.name = ast_ep_name[i];
+		if (i == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
+
+		ep->ep.ops = &ast_udc_ep_ops;
+		ep->udc = udc;
+
+		INIT_LIST_HEAD(&ep->queue);
+
+		if (i == 0) {
+			usb_ep_set_maxpacket_limit(&ep->ep,
+						   AST_UDC_EP0_MAX_PACKET);
+			continue;
+		}
+
+		ep->ep_reg = udc->reg + AST_UDC_EP_BASE +
+				(AST_UDC_EP_OFFSET * (i - 1));
+
+		ep->epn_buf = udc->ep0_buf + (i * AST_UDC_EP_DMA_SIZE);
+		ep->epn_buf_dma = udc->ep0_buf_dma + (i * AST_UDC_EP_DMA_SIZE);
+		usb_ep_set_maxpacket_limit(&ep->ep, AST_UDC_EPn_MAX_PACKET);
+
+		ep->descs = ep->epn_buf + AST_UDC_EPn_MAX_PACKET;
+		ep->descs_dma = ep->epn_buf_dma + AST_UDC_EPn_MAX_PACKET;
+		ep->descs_wptr = 0;
+
+		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+	}
+}
+
+static void ast_udc_init_dev(struct ast_udc_dev *udc)
+{
+	INIT_WORK(&udc->wake_work, ast_udc_wake_work);
+}
+
+static void ast_udc_init_hw(struct ast_udc_dev *udc)
+{
+	u32 ctrl;
+
+	/* Enable PHY */
+	ctrl = USB_PHY_CLK_EN | USB_PHY_RESET_DIS;
+	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
+
+	udelay(1);
+	ast_udc_write(udc, 0, AST_UDC_DEV_RESET);
+
+	/* Set descriptor ring size */
+	if (AST_UDC_DESCS_COUNT == 256) {
+		ctrl |= USB_EP_LONG_DESC;
+		ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
+	}
+
+	/* Mask & ack all interrupts before installing the handler */
+	ast_udc_write(udc, 0, AST_UDC_IER);
+	ast_udc_write(udc, UDC_IRQ_ACK_ALL, AST_UDC_ISR);
+
+	/* Enable some interrupts */
+	ctrl = UDC_IRQ_EP_POOL_ACK_STALL | UDC_IRQ_BUS_RESUME |
+	       UDC_IRQ_BUS_SUSPEND | UDC_IRQ_BUS_RESET |
+	       UDC_IRQ_EP0_IN_ACK_STALL | UDC_IRQ_EP0_OUT_ACK_STALL |
+	       UDC_IRQ_EP0_SETUP;
+	ast_udc_write(udc, ctrl, AST_UDC_IER);
+
+	/* Cleanup and enable ep ACK interrupts */
+	ast_udc_write(udc, UDC_IRQ_EP_ACK_ALL, AST_UDC_EP_ACK_IER);
+	ast_udc_write(udc, UDC_IRQ_EP_ACK_ALL, AST_UDC_EP_ACK_ISR);
+
+	ast_udc_write(udc, 0, AST_UDC_EP0_CTRL);
+}
+
+static int ast_udc_remove(struct platform_device *pdev)
+{
+	struct ast_udc_dev *udc = platform_get_drvdata(pdev);
+	unsigned long flags;
+	u32 ctrl;
+
+	usb_del_gadget_udc(&udc->gadget);
+	if (udc->driver)
+		return -EBUSY;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* Disable upstream port connection */
+	ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) & ~USB_UPSTREAM_EN;
+	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
+
+	clk_disable_unprepare(udc->clk);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (udc->ep0_buf)
+		dma_free_coherent(&pdev->dev,
+				  AST_UDC_EP_DMA_SIZE * AST_UDC_NUM_ENDPOINTS,
+				  udc->ep0_buf,
+				  udc->ep0_buf_dma);
+
+	udc->ep0_buf = NULL;
+
+	return 0;
+}
+
+static int ast_udc_probe(struct platform_device *pdev)
+{
+	enum usb_device_speed max_speed;
+	struct device *dev = &pdev->dev;
+	struct ast_udc_dev *udc;
+	struct resource *res;
+	int rc;
+
+	udc = devm_kzalloc(&pdev->dev, sizeof(struct ast_udc_dev), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
+
+	udc->gadget.dev.parent = dev;
+	udc->pdev = pdev;
+	spin_lock_init(&udc->lock);
+
+	udc->gadget.ops = &ast_udc_ops;
+	udc->gadget.ep0 = &udc->ep[0].ep;
+	udc->gadget.name = "aspeed-udc";
+	udc->gadget.dev.init_name = "gadget";
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	udc->reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(udc->reg)) {
+		dev_err(&pdev->dev, "Failed to map resources\n");
+		return PTR_ERR(udc->reg);
+	}
+
+	platform_set_drvdata(pdev, udc);
+
+	udc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(udc->clk)) {
+		rc = PTR_ERR(udc->clk);
+		goto err;
+	}
+	rc = clk_prepare_enable(udc->clk);
+	if (rc) {
+		dev_err(&pdev->dev, "Failed to enable clock (0x%x)\n", rc);
+		goto err;
+	}
+
+	/* Check if we need to limit the HW to USB1 */
+	max_speed = usb_get_maximum_speed(&pdev->dev);
+	if (max_speed != USB_SPEED_UNKNOWN && max_speed < USB_SPEED_HIGH)
+		udc->force_usb1 = true;
+
+	/*
+	 * Allocate DMA buffers for all EPs in one chunk
+	 */
+	udc->ep0_buf = dma_alloc_coherent(&pdev->dev,
+					  AST_UDC_EP_DMA_SIZE *
+					  AST_UDC_NUM_ENDPOINTS,
+					  &udc->ep0_buf_dma, GFP_KERNEL);
+
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->gadget.max_speed = USB_SPEED_HIGH;
+	udc->creq = udc->reg + AST_UDC_SETUP0;
+
+	/*
+	 * Support single stage mode or 32/256 stages descriptor mode.
+	 * Set default as Descriptor Mode.
+	 */
+	udc->desc_mode = AST_UDC_DESC_MODE;
+
+	dev_info(&pdev->dev, "DMA %s\n", udc->desc_mode ?
+		 "descriptor mode" : "single mode");
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+	INIT_LIST_HEAD(&udc->gadget.ep0->ep_list);
+
+	/* Initialized udc ep */
+	ast_udc_init_ep(udc);
+
+	/* Initialized udc device */
+	ast_udc_init_dev(udc);
+
+	/* Initialized udc hardware */
+	ast_udc_init_hw(udc);
+
+	/* Find interrupt and install handler */
+	udc->irq = platform_get_irq(pdev, 0);
+	if (udc->irq < 0) {
+		rc = udc->irq;
+		goto err;
+	}
+
+	rc = devm_request_irq(&pdev->dev, udc->irq, ast_udc_isr, 0,
+			      KBUILD_MODNAME, udc);
+	if (rc) {
+		dev_err(&pdev->dev, "Failed to request interrupt\n");
+		goto err;
+	}
+
+	rc = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
+	if (rc) {
+		dev_err(&pdev->dev, "Failed to add gadget udc\n");
+		goto err;
+	}
+
+	dev_info(&pdev->dev, "Initialized udc in USB%s mode\n",
+		 udc->force_usb1 ? "1" : "2");
+
+	return 0;
+
+err:
+	dev_err(&pdev->dev, "Failed to udc probe, rc:0x%x\n", rc);
+	ast_udc_remove(pdev);
+
+	return rc;
+}
+
+static const struct of_device_id ast_udc_of_dt_ids[] = {
+	{ .compatible = "aspeed,ast2600-udc", },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, ast_udc_of_dt_ids);
+
+static struct platform_driver ast_udc_driver = {
+	.probe			= ast_udc_probe,
+	.remove			= ast_udc_remove,
+	.driver			= {
+		.name			= KBUILD_MODNAME,
+		.of_match_table		= ast_udc_of_dt_ids,
+	},
+};
+
+module_platform_driver(ast_udc_driver);
+
+MODULE_DESCRIPTION("ASPEED UDC driver");
+MODULE_AUTHOR("Neal Liu <neal_liu@aspeedtech.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c
new file mode 100644
index 000000000..a9a7b3fc6
--- /dev/null
+++ b/drivers/usb/gadget/udc/at91_udc.c
@@ -0,0 +1,2021 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * at91_udc -- driver for at91-series USB peripheral controller
+ *
+ * Copyright (C) 2004 by Thomas Rathbone
+ * Copyright (C) 2005 by HP Labs
+ * Copyright (C) 2005 by David Brownell
+ */
+
+#undef	VERBOSE_DEBUG
+#undef	PACKET_TRACE
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/prefetch.h>
+#include <linux/clk.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/of.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_data/atmel.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-matrix.h>
+
+#include "at91_udc.h"
+
+
+/*
+ * This controller is simple and PIO-only.  It's used in many AT91-series
+ * full speed USB controllers, including the at91rm9200 (arm920T, with MMU),
+ * at91sam926x (arm926ejs, with MMU), and several no-mmu versions.
+ *
+ * This driver expects the board has been wired with two GPIOs supporting
+ * a VBUS sensing IRQ, and a D+ pullup.  (They may be omitted, but the
+ * testing hasn't covered such cases.)
+ *
+ * The pullup is most important (so it's integrated on sam926x parts).  It
+ * provides software control over whether the host enumerates the device.
+ *
+ * The VBUS sensing helps during enumeration, and allows both USB clocks
+ * (and the transceiver) to stay gated off until they're necessary, saving
+ * power.  During USB suspend, the 48 MHz clock is gated off in hardware;
+ * it may also be gated off by software during some Linux sleep states.
+ */
+
+#define	DRIVER_VERSION	"3 May 2006"
+
+static const char driver_name [] = "at91_udc";
+
+static const struct {
+	const char *name;
+	const struct usb_ep_caps caps;
+} ep_info[] = {
+#define EP_INFO(_name, _caps) \
+	{ \
+		.name = _name, \
+		.caps = _caps, \
+	}
+
+	EP_INFO("ep0",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)),
+	EP_INFO("ep1",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)),
+	EP_INFO("ep2",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)),
+	EP_INFO("ep3-int",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_ALL)),
+	EP_INFO("ep4",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)),
+	EP_INFO("ep5",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)),
+
+#undef EP_INFO
+};
+
+#define ep0name		ep_info[0].name
+
+#define VBUS_POLL_TIMEOUT	msecs_to_jiffies(1000)
+
+#define at91_udp_read(udc, reg) \
+	__raw_readl((udc)->udp_baseaddr + (reg))
+#define at91_udp_write(udc, reg, val) \
+	__raw_writel((val), (udc)->udp_baseaddr + (reg))
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+#include <linux/seq_file.h>
+
+static const char debug_filename[] = "driver/udc";
+
+#define FOURBITS "%s%s%s%s"
+#define EIGHTBITS FOURBITS FOURBITS
+
+static void proc_ep_show(struct seq_file *s, struct at91_ep *ep)
+{
+	static char		*types[] = {
+		"control", "out-iso", "out-bulk", "out-int",
+		"BOGUS",   "in-iso",  "in-bulk",  "in-int"};
+
+	u32			csr;
+	struct at91_request	*req;
+	unsigned long	flags;
+	struct at91_udc	*udc = ep->udc;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	csr = __raw_readl(ep->creg);
+
+	/* NOTE:  not collecting per-endpoint irq statistics... */
+
+	seq_printf(s, "\n");
+	seq_printf(s, "%s, maxpacket %d %s%s %s%s\n",
+			ep->ep.name, ep->ep.maxpacket,
+			ep->is_in ? "in" : "out",
+			ep->is_iso ? " iso" : "",
+			ep->is_pingpong
+				? (ep->fifo_bank ? "pong" : "ping")
+				: "",
+			ep->stopped ? " stopped" : "");
+	seq_printf(s, "csr %08x rxbytes=%d %s %s %s" EIGHTBITS "\n",
+		csr,
+		(csr & 0x07ff0000) >> 16,
+		(csr & (1 << 15)) ? "enabled" : "disabled",
+		(csr & (1 << 11)) ? "DATA1" : "DATA0",
+		types[(csr & 0x700) >> 8],
+
+		/* iff type is control then print current direction */
+		(!(csr & 0x700))
+			? ((csr & (1 << 7)) ? " IN" : " OUT")
+			: "",
+		(csr & (1 << 6)) ? " rxdatabk1" : "",
+		(csr & (1 << 5)) ? " forcestall" : "",
+		(csr & (1 << 4)) ? " txpktrdy" : "",
+
+		(csr & (1 << 3)) ? " stallsent" : "",
+		(csr & (1 << 2)) ? " rxsetup" : "",
+		(csr & (1 << 1)) ? " rxdatabk0" : "",
+		(csr & (1 << 0)) ? " txcomp" : "");
+	if (list_empty (&ep->queue))
+		seq_printf(s, "\t(queue empty)\n");
+
+	else list_for_each_entry (req, &ep->queue, queue) {
+		unsigned	length = req->req.actual;
+
+		seq_printf(s, "\treq %p len %d/%d buf %p\n",
+				&req->req, length,
+				req->req.length, req->req.buf);
+	}
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+static void proc_irq_show(struct seq_file *s, const char *label, u32 mask)
+{
+	int i;
+
+	seq_printf(s, "%s %04x:%s%s" FOURBITS, label, mask,
+		(mask & (1 << 13)) ? " wakeup" : "",
+		(mask & (1 << 12)) ? " endbusres" : "",
+
+		(mask & (1 << 11)) ? " sofint" : "",
+		(mask & (1 << 10)) ? " extrsm" : "",
+		(mask & (1 << 9)) ? " rxrsm" : "",
+		(mask & (1 << 8)) ? " rxsusp" : "");
+	for (i = 0; i < 8; i++) {
+		if (mask & (1 << i))
+			seq_printf(s, " ep%d", i);
+	}
+	seq_printf(s, "\n");
+}
+
+static int proc_udc_show(struct seq_file *s, void *unused)
+{
+	struct at91_udc	*udc = s->private;
+	struct at91_ep	*ep;
+	u32		tmp;
+
+	seq_printf(s, "%s: version %s\n", driver_name, DRIVER_VERSION);
+
+	seq_printf(s, "vbus %s, pullup %s, %s powered%s, gadget %s\n\n",
+		udc->vbus ? "present" : "off",
+		udc->enabled
+			? (udc->vbus ? "active" : "enabled")
+			: "disabled",
+		udc->gadget.is_selfpowered ? "self" : "VBUS",
+		udc->suspended ? ", suspended" : "",
+		udc->driver ? udc->driver->driver.name : "(none)");
+
+	/* don't access registers when interface isn't clocked */
+	if (!udc->clocked) {
+		seq_printf(s, "(not clocked)\n");
+		return 0;
+	}
+
+	tmp = at91_udp_read(udc, AT91_UDP_FRM_NUM);
+	seq_printf(s, "frame %05x:%s%s frame=%d\n", tmp,
+		(tmp & AT91_UDP_FRM_OK) ? " ok" : "",
+		(tmp & AT91_UDP_FRM_ERR) ? " err" : "",
+		(tmp & AT91_UDP_NUM));
+
+	tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
+	seq_printf(s, "glbstate %02x:%s" FOURBITS "\n", tmp,
+		(tmp & AT91_UDP_RMWUPE) ? " rmwupe" : "",
+		(tmp & AT91_UDP_RSMINPR) ? " rsminpr" : "",
+		(tmp & AT91_UDP_ESR) ? " esr" : "",
+		(tmp & AT91_UDP_CONFG) ? " confg" : "",
+		(tmp & AT91_UDP_FADDEN) ? " fadden" : "");
+
+	tmp = at91_udp_read(udc, AT91_UDP_FADDR);
+	seq_printf(s, "faddr   %03x:%s fadd=%d\n", tmp,
+		(tmp & AT91_UDP_FEN) ? " fen" : "",
+		(tmp & AT91_UDP_FADD));
+
+	proc_irq_show(s, "imr   ", at91_udp_read(udc, AT91_UDP_IMR));
+	proc_irq_show(s, "isr   ", at91_udp_read(udc, AT91_UDP_ISR));
+
+	if (udc->enabled && udc->vbus) {
+		proc_ep_show(s, &udc->ep[0]);
+		list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
+			if (ep->ep.desc)
+				proc_ep_show(s, ep);
+		}
+	}
+	return 0;
+}
+
+static void create_debug_file(struct at91_udc *udc)
+{
+	udc->pde = proc_create_single_data(debug_filename, 0, NULL,
+			proc_udc_show, udc);
+}
+
+static void remove_debug_file(struct at91_udc *udc)
+{
+	if (udc->pde)
+		remove_proc_entry(debug_filename, NULL);
+}
+
+#else
+
+static inline void create_debug_file(struct at91_udc *udc) {}
+static inline void remove_debug_file(struct at91_udc *udc) {}
+
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+static void done(struct at91_ep *ep, struct at91_request *req, int status)
+{
+	unsigned	stopped = ep->stopped;
+	struct at91_udc	*udc = ep->udc;
+
+	list_del_init(&req->queue);
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+	if (status && status != -ESHUTDOWN)
+		VDBG("%s done %p, status %d\n", ep->ep.name, req, status);
+
+	ep->stopped = 1;
+	spin_unlock(&udc->lock);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&udc->lock);
+	ep->stopped = stopped;
+
+	/* ep0 is always ready; other endpoints need a non-empty queue */
+	if (list_empty(&ep->queue) && ep->int_mask != (1 << 0))
+		at91_udp_write(udc, AT91_UDP_IDR, ep->int_mask);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* bits indicating OUT fifo has data ready */
+#define	RX_DATA_READY	(AT91_UDP_RX_DATA_BK0 | AT91_UDP_RX_DATA_BK1)
+
+/*
+ * Endpoint FIFO CSR bits have a mix of bits, making it unsafe to just write
+ * back most of the value you just read (because of side effects, including
+ * bits that may change after reading and before writing).
+ *
+ * Except when changing a specific bit, always write values which:
+ *  - clear SET_FX bits (setting them could change something)
+ *  - set CLR_FX bits (clearing them could change something)
+ *
+ * There are also state bits like FORCESTALL, EPEDS, DIR, and EPTYPE
+ * that shouldn't normally be changed.
+ *
+ * NOTE at91sam9260 docs mention synch between UDPCK and MCK clock domains,
+ * implying a need to wait for one write to complete (test relevant bits)
+ * before starting the next write.  This shouldn't be an issue given how
+ * infrequently we write, except maybe for write-then-read idioms.
+ */
+#define	SET_FX	(AT91_UDP_TXPKTRDY)
+#define	CLR_FX	(RX_DATA_READY | AT91_UDP_RXSETUP \
+		| AT91_UDP_STALLSENT | AT91_UDP_TXCOMP)
+
+/* pull OUT packet data from the endpoint's fifo */
+static int read_fifo (struct at91_ep *ep, struct at91_request *req)
+{
+	u32 __iomem	*creg = ep->creg;
+	u8 __iomem	*dreg = ep->creg + (AT91_UDP_FDR(0) - AT91_UDP_CSR(0));
+	u32		csr;
+	u8		*buf;
+	unsigned int	count, bufferspace, is_done;
+
+	buf = req->req.buf + req->req.actual;
+	bufferspace = req->req.length - req->req.actual;
+
+	/*
+	 * there might be nothing to read if ep_queue() calls us,
+	 * or if we already emptied both pingpong buffers
+	 */
+rescan:
+	csr = __raw_readl(creg);
+	if ((csr & RX_DATA_READY) == 0)
+		return 0;
+
+	count = (csr & AT91_UDP_RXBYTECNT) >> 16;
+	if (count > ep->ep.maxpacket)
+		count = ep->ep.maxpacket;
+	if (count > bufferspace) {
+		DBG("%s buffer overflow\n", ep->ep.name);
+		req->req.status = -EOVERFLOW;
+		count = bufferspace;
+	}
+	__raw_readsb(dreg, buf, count);
+
+	/* release and swap pingpong mem bank */
+	csr |= CLR_FX;
+	if (ep->is_pingpong) {
+		if (ep->fifo_bank == 0) {
+			csr &= ~(SET_FX | AT91_UDP_RX_DATA_BK0);
+			ep->fifo_bank = 1;
+		} else {
+			csr &= ~(SET_FX | AT91_UDP_RX_DATA_BK1);
+			ep->fifo_bank = 0;
+		}
+	} else
+		csr &= ~(SET_FX | AT91_UDP_RX_DATA_BK0);
+	__raw_writel(csr, creg);
+
+	req->req.actual += count;
+	is_done = (count < ep->ep.maxpacket);
+	if (count == bufferspace)
+		is_done = 1;
+
+	PACKET("%s %p out/%d%s\n", ep->ep.name, &req->req, count,
+			is_done ? " (done)" : "");
+
+	/*
+	 * avoid extra trips through IRQ logic for packets already in
+	 * the fifo ... maybe preventing an extra (expensive) OUT-NAK
+	 */
+	if (is_done)
+		done(ep, req, 0);
+	else if (ep->is_pingpong) {
+		/*
+		 * One dummy read to delay the code because of a HW glitch:
+		 * CSR returns bad RXCOUNT when read too soon after updating
+		 * RX_DATA_BK flags.
+		 */
+		csr = __raw_readl(creg);
+
+		bufferspace -= count;
+		buf += count;
+		goto rescan;
+	}
+
+	return is_done;
+}
+
+/* load fifo for an IN packet */
+static int write_fifo(struct at91_ep *ep, struct at91_request *req)
+{
+	u32 __iomem	*creg = ep->creg;
+	u32		csr = __raw_readl(creg);
+	u8 __iomem	*dreg = ep->creg + (AT91_UDP_FDR(0) - AT91_UDP_CSR(0));
+	unsigned	total, count, is_last;
+	u8		*buf;
+
+	/*
+	 * TODO: allow for writing two packets to the fifo ... that'll
+	 * reduce the amount of IN-NAKing, but probably won't affect
+	 * throughput much.  (Unlike preventing OUT-NAKing!)
+	 */
+
+	/*
+	 * If ep_queue() calls us, the queue is empty and possibly in
+	 * odd states like TXCOMP not yet cleared (we do it, saving at
+	 * least one IRQ) or the fifo not yet being free.  Those aren't
+	 * issues normally (IRQ handler fast path).
+	 */
+	if (unlikely(csr & (AT91_UDP_TXCOMP | AT91_UDP_TXPKTRDY))) {
+		if (csr & AT91_UDP_TXCOMP) {
+			csr |= CLR_FX;
+			csr &= ~(SET_FX | AT91_UDP_TXCOMP);
+			__raw_writel(csr, creg);
+			csr = __raw_readl(creg);
+		}
+		if (csr & AT91_UDP_TXPKTRDY)
+			return 0;
+	}
+
+	buf = req->req.buf + req->req.actual;
+	prefetch(buf);
+	total = req->req.length - req->req.actual;
+	if (ep->ep.maxpacket < total) {
+		count = ep->ep.maxpacket;
+		is_last = 0;
+	} else {
+		count = total;
+		is_last = (count < ep->ep.maxpacket) || !req->req.zero;
+	}
+
+	/*
+	 * Write the packet, maybe it's a ZLP.
+	 *
+	 * NOTE:  incrementing req->actual before we receive the ACK means
+	 * gadget driver IN bytecounts can be wrong in fault cases.  That's
+	 * fixable with PIO drivers like this one (save "count" here, and
+	 * do the increment later on TX irq), but not for most DMA hardware.
+	 *
+	 * So all gadget drivers must accept that potential error.  Some
+	 * hardware supports precise fifo status reporting, letting them
+	 * recover when the actual bytecount matters (e.g. for USB Test
+	 * and Measurement Class devices).
+	 */
+	__raw_writesb(dreg, buf, count);
+	csr &= ~SET_FX;
+	csr |= CLR_FX | AT91_UDP_TXPKTRDY;
+	__raw_writel(csr, creg);
+	req->req.actual += count;
+
+	PACKET("%s %p in/%d%s\n", ep->ep.name, &req->req, count,
+			is_last ? " (done)" : "");
+	if (is_last)
+		done(ep, req, 0);
+	return is_last;
+}
+
+static void nuke(struct at91_ep *ep, int status)
+{
+	struct at91_request *req;
+
+	/* terminate any request in the queue */
+	ep->stopped = 1;
+	if (list_empty(&ep->queue))
+		return;
+
+	VDBG("%s %s\n", __func__, ep->ep.name);
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct at91_request, queue);
+		done(ep, req, status);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int at91_ep_enable(struct usb_ep *_ep,
+				const struct usb_endpoint_descriptor *desc)
+{
+	struct at91_ep	*ep = container_of(_ep, struct at91_ep, ep);
+	struct at91_udc *udc;
+	u16		maxpacket;
+	u32		tmp;
+	unsigned long	flags;
+
+	if (!_ep || !ep
+			|| !desc || _ep->name == ep0name
+			|| desc->bDescriptorType != USB_DT_ENDPOINT
+			|| (maxpacket = usb_endpoint_maxp(desc)) == 0
+			|| maxpacket > ep->maxpacket) {
+		DBG("bad ep or descriptor\n");
+		return -EINVAL;
+	}
+
+	udc = ep->udc;
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
+		DBG("bogus device state\n");
+		return -ESHUTDOWN;
+	}
+
+	tmp = usb_endpoint_type(desc);
+	switch (tmp) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		DBG("only one control endpoint\n");
+		return -EINVAL;
+	case USB_ENDPOINT_XFER_INT:
+		if (maxpacket > 64)
+			goto bogus_max;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		switch (maxpacket) {
+		case 8:
+		case 16:
+		case 32:
+		case 64:
+			goto ok;
+		}
+bogus_max:
+		DBG("bogus maxpacket %d\n", maxpacket);
+		return -EINVAL;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (!ep->is_pingpong) {
+			DBG("iso requires double buffering\n");
+			return -EINVAL;
+		}
+		break;
+	}
+
+ok:
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* initialize endpoint to match this descriptor */
+	ep->is_in = usb_endpoint_dir_in(desc);
+	ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC);
+	ep->stopped = 0;
+	if (ep->is_in)
+		tmp |= 0x04;
+	tmp <<= 8;
+	tmp |= AT91_UDP_EPEDS;
+	__raw_writel(tmp, ep->creg);
+
+	ep->ep.maxpacket = maxpacket;
+
+	/*
+	 * reset/init endpoint fifo.  NOTE:  leaves fifo_bank alone,
+	 * since endpoint resets don't reset hw pingpong state.
+	 */
+	at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+	at91_udp_write(udc, AT91_UDP_RST_EP, 0);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+static int at91_ep_disable (struct usb_ep * _ep)
+{
+	struct at91_ep	*ep = container_of(_ep, struct at91_ep, ep);
+	struct at91_udc	*udc = ep->udc;
+	unsigned long	flags;
+
+	if (ep == &ep->udc->ep[0])
+		return -EINVAL;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	nuke(ep, -ESHUTDOWN);
+
+	/* restore the endpoint's pristine config */
+	ep->ep.desc = NULL;
+	ep->ep.maxpacket = ep->maxpacket;
+
+	/* reset fifos and endpoint */
+	if (ep->udc->clocked) {
+		at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+		at91_udp_write(udc, AT91_UDP_RST_EP, 0);
+		__raw_writel(0, ep->creg);
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/*
+ * this is a PIO-only driver, so there's nothing
+ * interesting for request or buffer allocation.
+ */
+
+static struct usb_request *
+at91_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct at91_request *req;
+
+	req = kzalloc(sizeof (struct at91_request), gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+	return &req->req;
+}
+
+static void at91_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct at91_request *req;
+
+	req = container_of(_req, struct at91_request, req);
+	BUG_ON(!list_empty(&req->queue));
+	kfree(req);
+}
+
+static int at91_ep_queue(struct usb_ep *_ep,
+			struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct at91_request	*req;
+	struct at91_ep		*ep;
+	struct at91_udc		*udc;
+	int			status;
+	unsigned long		flags;
+
+	req = container_of(_req, struct at91_request, req);
+	ep = container_of(_ep, struct at91_ep, ep);
+
+	if (!_req || !_req->complete
+			|| !_req->buf || !list_empty(&req->queue)) {
+		DBG("invalid request\n");
+		return -EINVAL;
+	}
+
+	if (!_ep || (!ep->ep.desc && ep->ep.name != ep0name)) {
+		DBG("invalid ep\n");
+		return -EINVAL;
+	}
+
+	udc = ep->udc;
+
+	if (!udc || !udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
+		DBG("invalid device\n");
+		return -EINVAL;
+	}
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* try to kickstart any empty and idle queue */
+	if (list_empty(&ep->queue) && !ep->stopped) {
+		int	is_ep0;
+
+		/*
+		 * If this control request has a non-empty DATA stage, this
+		 * will start that stage.  It works just like a non-control
+		 * request (until the status stage starts, maybe early).
+		 *
+		 * If the data stage is empty, then this starts a successful
+		 * IN/STATUS stage.  (Unsuccessful ones use set_halt.)
+		 */
+		is_ep0 = (ep->ep.name == ep0name);
+		if (is_ep0) {
+			u32	tmp;
+
+			if (!udc->req_pending) {
+				status = -EINVAL;
+				goto done;
+			}
+
+			/*
+			 * defer changing CONFG until after the gadget driver
+			 * reconfigures the endpoints.
+			 */
+			if (udc->wait_for_config_ack) {
+				tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
+				tmp ^= AT91_UDP_CONFG;
+				VDBG("toggle config\n");
+				at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
+			}
+			if (req->req.length == 0) {
+ep0_in_status:
+				PACKET("ep0 in/status\n");
+				status = 0;
+				tmp = __raw_readl(ep->creg);
+				tmp &= ~SET_FX;
+				tmp |= CLR_FX | AT91_UDP_TXPKTRDY;
+				__raw_writel(tmp, ep->creg);
+				udc->req_pending = 0;
+				goto done;
+			}
+		}
+
+		if (ep->is_in)
+			status = write_fifo(ep, req);
+		else {
+			status = read_fifo(ep, req);
+
+			/* IN/STATUS stage is otherwise triggered by irq */
+			if (status && is_ep0)
+				goto ep0_in_status;
+		}
+	} else
+		status = 0;
+
+	if (req && !status) {
+		list_add_tail (&req->queue, &ep->queue);
+		at91_udp_write(udc, AT91_UDP_IER, ep->int_mask);
+	}
+done:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return (status < 0) ? status : 0;
+}
+
+static int at91_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct at91_ep		*ep;
+	struct at91_request	*req = NULL, *iter;
+	unsigned long		flags;
+	struct at91_udc		*udc;
+
+	ep = container_of(_ep, struct at91_ep, ep);
+	if (!_ep || ep->ep.name == ep0name)
+		return -EINVAL;
+
+	udc = ep->udc;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		req = iter;
+		break;
+	}
+	if (!req) {
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return -EINVAL;
+	}
+
+	done(ep, req, -ECONNRESET);
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+static int at91_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	struct at91_ep	*ep = container_of(_ep, struct at91_ep, ep);
+	struct at91_udc	*udc = ep->udc;
+	u32 __iomem	*creg;
+	u32		csr;
+	unsigned long	flags;
+	int		status = 0;
+
+	if (!_ep || ep->is_iso || !ep->udc->clocked)
+		return -EINVAL;
+
+	creg = ep->creg;
+	spin_lock_irqsave(&udc->lock, flags);
+
+	csr = __raw_readl(creg);
+
+	/*
+	 * fail with still-busy IN endpoints, ensuring correct sequencing
+	 * of data tx then stall.  note that the fifo rx bytecount isn't
+	 * completely accurate as a tx bytecount.
+	 */
+	if (ep->is_in && (!list_empty(&ep->queue) || (csr >> 16) != 0))
+		status = -EAGAIN;
+	else {
+		csr |= CLR_FX;
+		csr &= ~SET_FX;
+		if (value) {
+			csr |= AT91_UDP_FORCESTALL;
+			VDBG("halt %s\n", ep->ep.name);
+		} else {
+			at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+			at91_udp_write(udc, AT91_UDP_RST_EP, 0);
+			csr &= ~AT91_UDP_FORCESTALL;
+		}
+		__raw_writel(csr, creg);
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return status;
+}
+
+static const struct usb_ep_ops at91_ep_ops = {
+	.enable		= at91_ep_enable,
+	.disable	= at91_ep_disable,
+	.alloc_request	= at91_ep_alloc_request,
+	.free_request	= at91_ep_free_request,
+	.queue		= at91_ep_queue,
+	.dequeue	= at91_ep_dequeue,
+	.set_halt	= at91_ep_set_halt,
+	/* there's only imprecise fifo status reporting */
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int at91_get_frame(struct usb_gadget *gadget)
+{
+	struct at91_udc *udc = to_udc(gadget);
+
+	if (!to_udc(gadget)->clocked)
+		return -EINVAL;
+	return at91_udp_read(udc, AT91_UDP_FRM_NUM) & AT91_UDP_NUM;
+}
+
+static int at91_wakeup(struct usb_gadget *gadget)
+{
+	struct at91_udc	*udc = to_udc(gadget);
+	u32		glbstate;
+	unsigned long	flags;
+
+	DBG("%s\n", __func__ );
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (!udc->clocked || !udc->suspended)
+		goto done;
+
+	/* NOTE:  some "early versions" handle ESR differently ... */
+
+	glbstate = at91_udp_read(udc, AT91_UDP_GLB_STAT);
+	if (!(glbstate & AT91_UDP_ESR))
+		goto done;
+	glbstate |= AT91_UDP_ESR;
+	at91_udp_write(udc, AT91_UDP_GLB_STAT, glbstate);
+
+done:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/* reinit == restore initial software state */
+static void udc_reinit(struct at91_udc *udc)
+{
+	u32 i;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+	INIT_LIST_HEAD(&udc->gadget.ep0->ep_list);
+	udc->gadget.quirk_stall_not_supp = 1;
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		struct at91_ep *ep = &udc->ep[i];
+
+		if (i != 0)
+			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+		ep->ep.desc = NULL;
+		ep->stopped = 0;
+		ep->fifo_bank = 0;
+		usb_ep_set_maxpacket_limit(&ep->ep, ep->maxpacket);
+		ep->creg = (void __iomem *) udc->udp_baseaddr + AT91_UDP_CSR(i);
+		/* initialize one queue per endpoint */
+		INIT_LIST_HEAD(&ep->queue);
+	}
+}
+
+static void reset_gadget(struct at91_udc *udc)
+{
+	struct usb_gadget_driver *driver = udc->driver;
+	int i;
+
+	if (udc->gadget.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->suspended = 0;
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		struct at91_ep *ep = &udc->ep[i];
+
+		ep->stopped = 1;
+		nuke(ep, -ESHUTDOWN);
+	}
+	if (driver) {
+		spin_unlock(&udc->lock);
+		usb_gadget_udc_reset(&udc->gadget, driver);
+		spin_lock(&udc->lock);
+	}
+
+	udc_reinit(udc);
+}
+
+static void stop_activity(struct at91_udc *udc)
+{
+	struct usb_gadget_driver *driver = udc->driver;
+	int i;
+
+	if (udc->gadget.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->suspended = 0;
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		struct at91_ep *ep = &udc->ep[i];
+		ep->stopped = 1;
+		nuke(ep, -ESHUTDOWN);
+	}
+	if (driver) {
+		spin_unlock(&udc->lock);
+		driver->disconnect(&udc->gadget);
+		spin_lock(&udc->lock);
+	}
+
+	udc_reinit(udc);
+}
+
+static void clk_on(struct at91_udc *udc)
+{
+	if (udc->clocked)
+		return;
+	udc->clocked = 1;
+
+	clk_enable(udc->iclk);
+	clk_enable(udc->fclk);
+}
+
+static void clk_off(struct at91_udc *udc)
+{
+	if (!udc->clocked)
+		return;
+	udc->clocked = 0;
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	clk_disable(udc->fclk);
+	clk_disable(udc->iclk);
+}
+
+/*
+ * activate/deactivate link with host; minimize power usage for
+ * inactive links by cutting clocks and transceiver power.
+ */
+static void pullup(struct at91_udc *udc, int is_on)
+{
+	if (!udc->enabled || !udc->vbus)
+		is_on = 0;
+	DBG("%sactive\n", is_on ? "" : "in");
+
+	if (is_on) {
+		clk_on(udc);
+		at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM);
+		at91_udp_write(udc, AT91_UDP_TXVC, 0);
+	} else {
+		stop_activity(udc);
+		at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM);
+		at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
+		clk_off(udc);
+	}
+
+	if (udc->caps && udc->caps->pullup)
+		udc->caps->pullup(udc, is_on);
+}
+
+/* vbus is here!  turn everything on that's ready */
+static int at91_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct at91_udc	*udc = to_udc(gadget);
+	unsigned long	flags;
+
+	/* VDBG("vbus %s\n", is_active ? "on" : "off"); */
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->vbus = (is_active != 0);
+	if (udc->driver)
+		pullup(udc, is_active);
+	else
+		pullup(udc, 0);
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+static int at91_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct at91_udc	*udc = to_udc(gadget);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->enabled = is_on = !!is_on;
+	pullup(udc, is_on);
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+static int at91_set_selfpowered(struct usb_gadget *gadget, int is_on)
+{
+	struct at91_udc	*udc = to_udc(gadget);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	gadget->is_selfpowered = (is_on != 0);
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+static int at91_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver);
+static int at91_stop(struct usb_gadget *gadget);
+
+static const struct usb_gadget_ops at91_udc_ops = {
+	.get_frame		= at91_get_frame,
+	.wakeup			= at91_wakeup,
+	.set_selfpowered	= at91_set_selfpowered,
+	.vbus_session		= at91_vbus_session,
+	.pullup			= at91_pullup,
+	.udc_start		= at91_start,
+	.udc_stop		= at91_stop,
+
+	/*
+	 * VBUS-powered devices may also want to support bigger
+	 * power budgets after an appropriate SET_CONFIGURATION.
+	 */
+	/* .vbus_power		= at91_vbus_power, */
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int handle_ep(struct at91_ep *ep)
+{
+	struct at91_request	*req;
+	u32 __iomem		*creg = ep->creg;
+	u32			csr = __raw_readl(creg);
+
+	if (!list_empty(&ep->queue))
+		req = list_entry(ep->queue.next,
+			struct at91_request, queue);
+	else
+		req = NULL;
+
+	if (ep->is_in) {
+		if (csr & (AT91_UDP_STALLSENT | AT91_UDP_TXCOMP)) {
+			csr |= CLR_FX;
+			csr &= ~(SET_FX | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP);
+			__raw_writel(csr, creg);
+		}
+		if (req)
+			return write_fifo(ep, req);
+
+	} else {
+		if (csr & AT91_UDP_STALLSENT) {
+			/* STALLSENT bit == ISOERR */
+			if (ep->is_iso && req)
+				req->req.status = -EILSEQ;
+			csr |= CLR_FX;
+			csr &= ~(SET_FX | AT91_UDP_STALLSENT);
+			__raw_writel(csr, creg);
+			csr = __raw_readl(creg);
+		}
+		if (req && (csr & RX_DATA_READY))
+			return read_fifo(ep, req);
+	}
+	return 0;
+}
+
+union setup {
+	u8			raw[8];
+	struct usb_ctrlrequest	r;
+};
+
+static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
+{
+	u32 __iomem	*creg = ep->creg;
+	u8 __iomem	*dreg = ep->creg + (AT91_UDP_FDR(0) - AT91_UDP_CSR(0));
+	unsigned	rxcount, i = 0;
+	u32		tmp;
+	union setup	pkt;
+	int		status = 0;
+
+	/* read and ack SETUP; hard-fail for bogus packets */
+	rxcount = (csr & AT91_UDP_RXBYTECNT) >> 16;
+	if (likely(rxcount == 8)) {
+		while (rxcount--)
+			pkt.raw[i++] = __raw_readb(dreg);
+		if (pkt.r.bRequestType & USB_DIR_IN) {
+			csr |= AT91_UDP_DIR;
+			ep->is_in = 1;
+		} else {
+			csr &= ~AT91_UDP_DIR;
+			ep->is_in = 0;
+		}
+	} else {
+		/* REVISIT this happens sometimes under load; why?? */
+		ERR("SETUP len %d, csr %08x\n", rxcount, csr);
+		status = -EINVAL;
+	}
+	csr |= CLR_FX;
+	csr &= ~(SET_FX | AT91_UDP_RXSETUP);
+	__raw_writel(csr, creg);
+	udc->wait_for_addr_ack = 0;
+	udc->wait_for_config_ack = 0;
+	ep->stopped = 0;
+	if (unlikely(status != 0))
+		goto stall;
+
+#define w_index		le16_to_cpu(pkt.r.wIndex)
+#define w_value		le16_to_cpu(pkt.r.wValue)
+#define w_length	le16_to_cpu(pkt.r.wLength)
+
+	VDBG("SETUP %02x.%02x v%04x i%04x l%04x\n",
+			pkt.r.bRequestType, pkt.r.bRequest,
+			w_value, w_index, w_length);
+
+	/*
+	 * A few standard requests get handled here, ones that touch
+	 * hardware ... notably for device and endpoint features.
+	 */
+	udc->req_pending = 1;
+	csr = __raw_readl(creg);
+	csr |= CLR_FX;
+	csr &= ~SET_FX;
+	switch ((pkt.r.bRequestType << 8) | pkt.r.bRequest) {
+
+	case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
+			| USB_REQ_SET_ADDRESS:
+		__raw_writel(csr | AT91_UDP_TXPKTRDY, creg);
+		udc->addr = w_value;
+		udc->wait_for_addr_ack = 1;
+		udc->req_pending = 0;
+		/* FADDR is set later, when we ack host STATUS */
+		return;
+
+	case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
+			| USB_REQ_SET_CONFIGURATION:
+		tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT) & AT91_UDP_CONFG;
+		if (pkt.r.wValue)
+			udc->wait_for_config_ack = (tmp == 0);
+		else
+			udc->wait_for_config_ack = (tmp != 0);
+		if (udc->wait_for_config_ack)
+			VDBG("wait for config\n");
+		/* CONFG is toggled later, if gadget driver succeeds */
+		break;
+
+	/*
+	 * Hosts may set or clear remote wakeup status, and
+	 * devices may report they're VBUS powered.
+	 */
+	case ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
+			| USB_REQ_GET_STATUS:
+		tmp = (udc->gadget.is_selfpowered << USB_DEVICE_SELF_POWERED);
+		if (at91_udp_read(udc, AT91_UDP_GLB_STAT) & AT91_UDP_ESR)
+			tmp |= (1 << USB_DEVICE_REMOTE_WAKEUP);
+		PACKET("get device status\n");
+		__raw_writeb(tmp, dreg);
+		__raw_writeb(0, dreg);
+		goto write_in;
+		/* then STATUS starts later, automatically */
+	case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
+			| USB_REQ_SET_FEATURE:
+		if (w_value != USB_DEVICE_REMOTE_WAKEUP)
+			goto stall;
+		tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
+		tmp |= AT91_UDP_ESR;
+		at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
+		goto succeed;
+	case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
+			| USB_REQ_CLEAR_FEATURE:
+		if (w_value != USB_DEVICE_REMOTE_WAKEUP)
+			goto stall;
+		tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
+		tmp &= ~AT91_UDP_ESR;
+		at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
+		goto succeed;
+
+	/*
+	 * Interfaces have no feature settings; this is pretty useless.
+	 * we won't even insist the interface exists...
+	 */
+	case ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE) << 8)
+			| USB_REQ_GET_STATUS:
+		PACKET("get interface status\n");
+		__raw_writeb(0, dreg);
+		__raw_writeb(0, dreg);
+		goto write_in;
+		/* then STATUS starts later, automatically */
+	case ((USB_TYPE_STANDARD|USB_RECIP_INTERFACE) << 8)
+			| USB_REQ_SET_FEATURE:
+	case ((USB_TYPE_STANDARD|USB_RECIP_INTERFACE) << 8)
+			| USB_REQ_CLEAR_FEATURE:
+		goto stall;
+
+	/*
+	 * Hosts may clear bulk/intr endpoint halt after the gadget
+	 * driver sets it (not widely used); or set it (for testing)
+	 */
+	case ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT) << 8)
+			| USB_REQ_GET_STATUS:
+		tmp = w_index & USB_ENDPOINT_NUMBER_MASK;
+		ep = &udc->ep[tmp];
+		if (tmp >= NUM_ENDPOINTS || (tmp && !ep->ep.desc))
+			goto stall;
+
+		if (tmp) {
+			if ((w_index & USB_DIR_IN)) {
+				if (!ep->is_in)
+					goto stall;
+			} else if (ep->is_in)
+				goto stall;
+		}
+		PACKET("get %s status\n", ep->ep.name);
+		if (__raw_readl(ep->creg) & AT91_UDP_FORCESTALL)
+			tmp = (1 << USB_ENDPOINT_HALT);
+		else
+			tmp = 0;
+		__raw_writeb(tmp, dreg);
+		__raw_writeb(0, dreg);
+		goto write_in;
+		/* then STATUS starts later, automatically */
+	case ((USB_TYPE_STANDARD|USB_RECIP_ENDPOINT) << 8)
+			| USB_REQ_SET_FEATURE:
+		tmp = w_index & USB_ENDPOINT_NUMBER_MASK;
+		ep = &udc->ep[tmp];
+		if (w_value != USB_ENDPOINT_HALT || tmp >= NUM_ENDPOINTS)
+			goto stall;
+		if (!ep->ep.desc || ep->is_iso)
+			goto stall;
+		if ((w_index & USB_DIR_IN)) {
+			if (!ep->is_in)
+				goto stall;
+		} else if (ep->is_in)
+			goto stall;
+
+		tmp = __raw_readl(ep->creg);
+		tmp &= ~SET_FX;
+		tmp |= CLR_FX | AT91_UDP_FORCESTALL;
+		__raw_writel(tmp, ep->creg);
+		goto succeed;
+	case ((USB_TYPE_STANDARD|USB_RECIP_ENDPOINT) << 8)
+			| USB_REQ_CLEAR_FEATURE:
+		tmp = w_index & USB_ENDPOINT_NUMBER_MASK;
+		ep = &udc->ep[tmp];
+		if (w_value != USB_ENDPOINT_HALT || tmp >= NUM_ENDPOINTS)
+			goto stall;
+		if (tmp == 0)
+			goto succeed;
+		if (!ep->ep.desc || ep->is_iso)
+			goto stall;
+		if ((w_index & USB_DIR_IN)) {
+			if (!ep->is_in)
+				goto stall;
+		} else if (ep->is_in)
+			goto stall;
+
+		at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+		at91_udp_write(udc, AT91_UDP_RST_EP, 0);
+		tmp = __raw_readl(ep->creg);
+		tmp |= CLR_FX;
+		tmp &= ~(SET_FX | AT91_UDP_FORCESTALL);
+		__raw_writel(tmp, ep->creg);
+		if (!list_empty(&ep->queue))
+			handle_ep(ep);
+		goto succeed;
+	}
+
+#undef w_value
+#undef w_index
+#undef w_length
+
+	/* pass request up to the gadget driver */
+	if (udc->driver) {
+		spin_unlock(&udc->lock);
+		status = udc->driver->setup(&udc->gadget, &pkt.r);
+		spin_lock(&udc->lock);
+	}
+	else
+		status = -ENODEV;
+	if (status < 0) {
+stall:
+		VDBG("req %02x.%02x protocol STALL; stat %d\n",
+				pkt.r.bRequestType, pkt.r.bRequest, status);
+		csr |= AT91_UDP_FORCESTALL;
+		__raw_writel(csr, creg);
+		udc->req_pending = 0;
+	}
+	return;
+
+succeed:
+	/* immediate successful (IN) STATUS after zero length DATA */
+	PACKET("ep0 in/status\n");
+write_in:
+	csr |= AT91_UDP_TXPKTRDY;
+	__raw_writel(csr, creg);
+	udc->req_pending = 0;
+}
+
+static void handle_ep0(struct at91_udc *udc)
+{
+	struct at91_ep		*ep0 = &udc->ep[0];
+	u32 __iomem		*creg = ep0->creg;
+	u32			csr = __raw_readl(creg);
+	struct at91_request	*req;
+
+	if (unlikely(csr & AT91_UDP_STALLSENT)) {
+		nuke(ep0, -EPROTO);
+		udc->req_pending = 0;
+		csr |= CLR_FX;
+		csr &= ~(SET_FX | AT91_UDP_STALLSENT | AT91_UDP_FORCESTALL);
+		__raw_writel(csr, creg);
+		VDBG("ep0 stalled\n");
+		csr = __raw_readl(creg);
+	}
+	if (csr & AT91_UDP_RXSETUP) {
+		nuke(ep0, 0);
+		udc->req_pending = 0;
+		handle_setup(udc, ep0, csr);
+		return;
+	}
+
+	if (list_empty(&ep0->queue))
+		req = NULL;
+	else
+		req = list_entry(ep0->queue.next, struct at91_request, queue);
+
+	/* host ACKed an IN packet that we sent */
+	if (csr & AT91_UDP_TXCOMP) {
+		csr |= CLR_FX;
+		csr &= ~(SET_FX | AT91_UDP_TXCOMP);
+
+		/* write more IN DATA? */
+		if (req && ep0->is_in) {
+			if (handle_ep(ep0))
+				udc->req_pending = 0;
+
+		/*
+		 * Ack after:
+		 *  - last IN DATA packet (including GET_STATUS)
+		 *  - IN/STATUS for OUT DATA
+		 *  - IN/STATUS for any zero-length DATA stage
+		 * except for the IN DATA case, the host should send
+		 * an OUT status later, which we'll ack.
+		 */
+		} else {
+			udc->req_pending = 0;
+			__raw_writel(csr, creg);
+
+			/*
+			 * SET_ADDRESS takes effect only after the STATUS
+			 * (to the original address) gets acked.
+			 */
+			if (udc->wait_for_addr_ack) {
+				u32	tmp;
+
+				at91_udp_write(udc, AT91_UDP_FADDR,
+						AT91_UDP_FEN | udc->addr);
+				tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
+				tmp &= ~AT91_UDP_FADDEN;
+				if (udc->addr)
+					tmp |= AT91_UDP_FADDEN;
+				at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
+
+				udc->wait_for_addr_ack = 0;
+				VDBG("address %d\n", udc->addr);
+			}
+		}
+	}
+
+	/* OUT packet arrived ... */
+	else if (csr & AT91_UDP_RX_DATA_BK0) {
+		csr |= CLR_FX;
+		csr &= ~(SET_FX | AT91_UDP_RX_DATA_BK0);
+
+		/* OUT DATA stage */
+		if (!ep0->is_in) {
+			if (req) {
+				if (handle_ep(ep0)) {
+					/* send IN/STATUS */
+					PACKET("ep0 in/status\n");
+					csr = __raw_readl(creg);
+					csr &= ~SET_FX;
+					csr |= CLR_FX | AT91_UDP_TXPKTRDY;
+					__raw_writel(csr, creg);
+					udc->req_pending = 0;
+				}
+			} else if (udc->req_pending) {
+				/*
+				 * AT91 hardware has a hard time with this
+				 * "deferred response" mode for control-OUT
+				 * transfers.  (For control-IN it's fine.)
+				 *
+				 * The normal solution leaves OUT data in the
+				 * fifo until the gadget driver is ready.
+				 * We couldn't do that here without disabling
+				 * the IRQ that tells about SETUP packets,
+				 * e.g. when the host gets impatient...
+				 *
+				 * Working around it by copying into a buffer
+				 * would almost be a non-deferred response,
+				 * except that it wouldn't permit reliable
+				 * stalling of the request.  Instead, demand
+				 * that gadget drivers not use this mode.
+				 */
+				DBG("no control-OUT deferred responses!\n");
+				__raw_writel(csr | AT91_UDP_FORCESTALL, creg);
+				udc->req_pending = 0;
+			}
+
+		/* STATUS stage for control-IN; ack.  */
+		} else {
+			PACKET("ep0 out/status ACK\n");
+			__raw_writel(csr, creg);
+
+			/* "early" status stage */
+			if (req)
+				done(ep0, req, 0);
+		}
+	}
+}
+
+static irqreturn_t at91_udc_irq (int irq, void *_udc)
+{
+	struct at91_udc		*udc = _udc;
+	u32			rescans = 5;
+	int			disable_clock = 0;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (!udc->clocked) {
+		clk_on(udc);
+		disable_clock = 1;
+	}
+
+	while (rescans--) {
+		u32 status;
+
+		status = at91_udp_read(udc, AT91_UDP_ISR)
+			& at91_udp_read(udc, AT91_UDP_IMR);
+		if (!status)
+			break;
+
+		/* USB reset irq:  not maskable */
+		if (status & AT91_UDP_ENDBUSRES) {
+			at91_udp_write(udc, AT91_UDP_IDR, ~MINIMUS_INTERRUPTUS);
+			at91_udp_write(udc, AT91_UDP_IER, MINIMUS_INTERRUPTUS);
+			/* Atmel code clears this irq twice */
+			at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
+			at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
+			VDBG("end bus reset\n");
+			udc->addr = 0;
+			reset_gadget(udc);
+
+			/* enable ep0 */
+			at91_udp_write(udc, AT91_UDP_CSR(0),
+					AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL);
+			udc->gadget.speed = USB_SPEED_FULL;
+			udc->suspended = 0;
+			at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_EP(0));
+
+			/*
+			 * NOTE:  this driver keeps clocks off unless the
+			 * USB host is present.  That saves power, but for
+			 * boards that don't support VBUS detection, both
+			 * clocks need to be active most of the time.
+			 */
+
+		/* host initiated suspend (3+ms bus idle) */
+		} else if (status & AT91_UDP_RXSUSP) {
+			at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXSUSP);
+			at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXRSM);
+			at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXSUSP);
+			/* VDBG("bus suspend\n"); */
+			if (udc->suspended)
+				continue;
+			udc->suspended = 1;
+
+			/*
+			 * NOTE:  when suspending a VBUS-powered device, the
+			 * gadget driver should switch into slow clock mode
+			 * and then into standby to avoid drawing more than
+			 * 500uA power (2500uA for some high-power configs).
+			 */
+			if (udc->driver && udc->driver->suspend) {
+				spin_unlock(&udc->lock);
+				udc->driver->suspend(&udc->gadget);
+				spin_lock(&udc->lock);
+			}
+
+		/* host initiated resume */
+		} else if (status & AT91_UDP_RXRSM) {
+			at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM);
+			at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXSUSP);
+			at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM);
+			/* VDBG("bus resume\n"); */
+			if (!udc->suspended)
+				continue;
+			udc->suspended = 0;
+
+			/*
+			 * NOTE:  for a VBUS-powered device, the gadget driver
+			 * would normally want to switch out of slow clock
+			 * mode into normal mode.
+			 */
+			if (udc->driver && udc->driver->resume) {
+				spin_unlock(&udc->lock);
+				udc->driver->resume(&udc->gadget);
+				spin_lock(&udc->lock);
+			}
+
+		/* endpoint IRQs are cleared by handling them */
+		} else {
+			int		i;
+			unsigned	mask = 1;
+			struct at91_ep	*ep = &udc->ep[1];
+
+			if (status & mask)
+				handle_ep0(udc);
+			for (i = 1; i < NUM_ENDPOINTS; i++) {
+				mask <<= 1;
+				if (status & mask)
+					handle_ep(ep);
+				ep++;
+			}
+		}
+	}
+
+	if (disable_clock)
+		clk_off(udc);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void at91_vbus_update(struct at91_udc *udc, unsigned value)
+{
+	if (value != udc->vbus)
+		at91_vbus_session(&udc->gadget, value);
+}
+
+static irqreturn_t at91_vbus_irq(int irq, void *_udc)
+{
+	struct at91_udc	*udc = _udc;
+
+	/* vbus needs at least brief debouncing */
+	udelay(10);
+	at91_vbus_update(udc, gpiod_get_value(udc->board.vbus_pin));
+
+	return IRQ_HANDLED;
+}
+
+static void at91_vbus_timer_work(struct work_struct *work)
+{
+	struct at91_udc *udc = container_of(work, struct at91_udc,
+					    vbus_timer_work);
+
+	at91_vbus_update(udc, gpiod_get_value_cansleep(udc->board.vbus_pin));
+
+	if (!timer_pending(&udc->vbus_timer))
+		mod_timer(&udc->vbus_timer, jiffies + VBUS_POLL_TIMEOUT);
+}
+
+static void at91_vbus_timer(struct timer_list *t)
+{
+	struct at91_udc *udc = from_timer(udc, t, vbus_timer);
+
+	/*
+	 * If we are polling vbus it is likely that the gpio is on an
+	 * bus such as i2c or spi which may sleep, so schedule some work
+	 * to read the vbus gpio
+	 */
+	schedule_work(&udc->vbus_timer_work);
+}
+
+static int at91_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct at91_udc	*udc;
+
+	udc = container_of(gadget, struct at91_udc, gadget);
+	udc->driver = driver;
+	udc->gadget.dev.of_node = udc->pdev->dev.of_node;
+	udc->enabled = 1;
+	udc->gadget.is_selfpowered = 1;
+
+	return 0;
+}
+
+static int at91_stop(struct usb_gadget *gadget)
+{
+	struct at91_udc *udc;
+	unsigned long	flags;
+
+	udc = container_of(gadget, struct at91_udc, gadget);
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->enabled = 0;
+	at91_udp_write(udc, AT91_UDP_IDR, ~0);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	udc->driver = NULL;
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void at91udc_shutdown(struct platform_device *dev)
+{
+	struct at91_udc *udc = platform_get_drvdata(dev);
+	unsigned long	flags;
+
+	/* force disconnect on reboot */
+	spin_lock_irqsave(&udc->lock, flags);
+	pullup(platform_get_drvdata(dev), 0);
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+static int at91rm9200_udc_init(struct at91_udc *udc)
+{
+	struct at91_ep *ep;
+	int i;
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+
+		switch (i) {
+		case 0:
+		case 3:
+			ep->maxpacket = 8;
+			break;
+		case 1 ... 2:
+			ep->maxpacket = 64;
+			break;
+		case 4 ... 5:
+			ep->maxpacket = 256;
+			break;
+		}
+	}
+
+	if (!udc->board.pullup_pin) {
+		DBG("no D+ pullup?\n");
+		return -ENODEV;
+	}
+
+	gpiod_direction_output(udc->board.pullup_pin,
+			       gpiod_is_active_low(udc->board.pullup_pin));
+
+	return 0;
+}
+
+static void at91rm9200_udc_pullup(struct at91_udc *udc, int is_on)
+{
+	if (is_on)
+		gpiod_set_value(udc->board.pullup_pin, 1);
+	else
+		gpiod_set_value(udc->board.pullup_pin, 0);
+}
+
+static const struct at91_udc_caps at91rm9200_udc_caps = {
+	.init = at91rm9200_udc_init,
+	.pullup = at91rm9200_udc_pullup,
+};
+
+static int at91sam9260_udc_init(struct at91_udc *udc)
+{
+	struct at91_ep *ep;
+	int i;
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+
+		switch (i) {
+		case 0 ... 3:
+			ep->maxpacket = 64;
+			break;
+		case 4 ... 5:
+			ep->maxpacket = 512;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static void at91sam9260_udc_pullup(struct at91_udc *udc, int is_on)
+{
+	u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
+
+	if (is_on)
+		txvc |= AT91_UDP_TXVC_PUON;
+	else
+		txvc &= ~AT91_UDP_TXVC_PUON;
+
+	at91_udp_write(udc, AT91_UDP_TXVC, txvc);
+}
+
+static const struct at91_udc_caps at91sam9260_udc_caps = {
+	.init = at91sam9260_udc_init,
+	.pullup = at91sam9260_udc_pullup,
+};
+
+static int at91sam9261_udc_init(struct at91_udc *udc)
+{
+	struct at91_ep *ep;
+	int i;
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+
+		switch (i) {
+		case 0:
+			ep->maxpacket = 8;
+			break;
+		case 1 ... 3:
+			ep->maxpacket = 64;
+			break;
+		case 4 ... 5:
+			ep->maxpacket = 256;
+			break;
+		}
+	}
+
+	udc->matrix = syscon_regmap_lookup_by_phandle(udc->pdev->dev.of_node,
+						      "atmel,matrix");
+	return PTR_ERR_OR_ZERO(udc->matrix);
+}
+
+static void at91sam9261_udc_pullup(struct at91_udc *udc, int is_on)
+{
+	u32 usbpucr = 0;
+
+	if (is_on)
+		usbpucr = AT91_MATRIX_USBPUCR_PUON;
+
+	regmap_update_bits(udc->matrix, AT91SAM9261_MATRIX_USBPUCR,
+			   AT91_MATRIX_USBPUCR_PUON, usbpucr);
+}
+
+static const struct at91_udc_caps at91sam9261_udc_caps = {
+	.init = at91sam9261_udc_init,
+	.pullup = at91sam9261_udc_pullup,
+};
+
+static int at91sam9263_udc_init(struct at91_udc *udc)
+{
+	struct at91_ep *ep;
+	int i;
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+
+		switch (i) {
+		case 0:
+		case 1:
+		case 2:
+		case 3:
+			ep->maxpacket = 64;
+			break;
+		case 4:
+		case 5:
+			ep->maxpacket = 256;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static const struct at91_udc_caps at91sam9263_udc_caps = {
+	.init = at91sam9263_udc_init,
+	.pullup = at91sam9260_udc_pullup,
+};
+
+static const struct of_device_id at91_udc_dt_ids[] = {
+	{
+		.compatible = "atmel,at91rm9200-udc",
+		.data = &at91rm9200_udc_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9260-udc",
+		.data = &at91sam9260_udc_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9261-udc",
+		.data = &at91sam9261_udc_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9263-udc",
+		.data = &at91sam9263_udc_caps,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, at91_udc_dt_ids);
+
+static void at91udc_of_init(struct at91_udc *udc, struct device_node *np)
+{
+	struct at91_udc_data *board = &udc->board;
+	const struct of_device_id *match;
+	u32 val;
+
+	if (of_property_read_u32(np, "atmel,vbus-polled", &val) == 0)
+		board->vbus_polled = 1;
+
+	board->vbus_pin = fwnode_gpiod_get_index(of_fwnode_handle(np),
+						 "atmel,vbus", 0, GPIOD_IN,
+						 "udc_vbus");
+	if (IS_ERR(board->vbus_pin))
+		board->vbus_pin = NULL;
+
+	board->pullup_pin = fwnode_gpiod_get_index(of_fwnode_handle(np),
+						   "atmel,pullup", 0,
+						   GPIOD_ASIS, "udc_pullup");
+	if (IS_ERR(board->pullup_pin))
+		board->pullup_pin = NULL;
+
+	match = of_match_node(at91_udc_dt_ids, np);
+	if (match)
+		udc->caps = match->data;
+}
+
+static int at91udc_probe(struct platform_device *pdev)
+{
+	struct device	*dev = &pdev->dev;
+	struct at91_udc	*udc;
+	int		retval;
+	struct at91_ep	*ep;
+	int		i;
+
+	udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
+
+	/* init software state */
+	udc->gadget.dev.parent = dev;
+	at91udc_of_init(udc, pdev->dev.of_node);
+	udc->pdev = pdev;
+	udc->enabled = 0;
+	spin_lock_init(&udc->lock);
+
+	udc->gadget.ops = &at91_udc_ops;
+	udc->gadget.ep0 = &udc->ep[0].ep;
+	udc->gadget.name = driver_name;
+	udc->gadget.dev.init_name = "gadget";
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+		ep->ep.name = ep_info[i].name;
+		ep->ep.caps = ep_info[i].caps;
+		ep->ep.ops = &at91_ep_ops;
+		ep->udc = udc;
+		ep->int_mask = BIT(i);
+		if (i != 0 && i != 3)
+			ep->is_pingpong = 1;
+	}
+
+	udc->udp_baseaddr = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(udc->udp_baseaddr))
+		return PTR_ERR(udc->udp_baseaddr);
+
+	if (udc->caps && udc->caps->init) {
+		retval = udc->caps->init(udc);
+		if (retval)
+			return retval;
+	}
+
+	udc_reinit(udc);
+
+	/* get interface and function clocks */
+	udc->iclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(udc->iclk))
+		return PTR_ERR(udc->iclk);
+
+	udc->fclk = devm_clk_get(dev, "hclk");
+	if (IS_ERR(udc->fclk))
+		return PTR_ERR(udc->fclk);
+
+	/* don't do anything until we have both gadget driver and VBUS */
+	clk_set_rate(udc->fclk, 48000000);
+	retval = clk_prepare(udc->fclk);
+	if (retval)
+		return retval;
+
+	retval = clk_prepare_enable(udc->iclk);
+	if (retval)
+		goto err_unprepare_fclk;
+
+	at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
+	at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
+	/* Clear all pending interrupts - UDP may be used by bootloader. */
+	at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff);
+	clk_disable(udc->iclk);
+
+	/* request UDC and maybe VBUS irqs */
+	udc->udp_irq = retval = platform_get_irq(pdev, 0);
+	if (retval < 0)
+		goto err_unprepare_iclk;
+	retval = devm_request_irq(dev, udc->udp_irq, at91_udc_irq, 0,
+				  driver_name, udc);
+	if (retval) {
+		DBG("request irq %d failed\n", udc->udp_irq);
+		goto err_unprepare_iclk;
+	}
+
+	if (udc->board.vbus_pin) {
+		gpiod_direction_input(udc->board.vbus_pin);
+
+		/*
+		 * Get the initial state of VBUS - we cannot expect
+		 * a pending interrupt.
+		 */
+		udc->vbus = gpiod_get_value_cansleep(udc->board.vbus_pin);
+
+		if (udc->board.vbus_polled) {
+			INIT_WORK(&udc->vbus_timer_work, at91_vbus_timer_work);
+			timer_setup(&udc->vbus_timer, at91_vbus_timer, 0);
+			mod_timer(&udc->vbus_timer,
+				  jiffies + VBUS_POLL_TIMEOUT);
+		} else {
+			retval = devm_request_irq(dev,
+					gpiod_to_irq(udc->board.vbus_pin),
+					at91_vbus_irq, 0, driver_name, udc);
+			if (retval) {
+				DBG("request vbus irq %d failed\n",
+				    desc_to_gpio(udc->board.vbus_pin));
+				goto err_unprepare_iclk;
+			}
+		}
+	} else {
+		DBG("no VBUS detection, assuming always-on\n");
+		udc->vbus = 1;
+	}
+	retval = usb_add_gadget_udc(dev, &udc->gadget);
+	if (retval)
+		goto err_unprepare_iclk;
+	dev_set_drvdata(dev, udc);
+	device_init_wakeup(dev, 1);
+	create_debug_file(udc);
+
+	INFO("%s version %s\n", driver_name, DRIVER_VERSION);
+	return 0;
+
+err_unprepare_iclk:
+	clk_unprepare(udc->iclk);
+err_unprepare_fclk:
+	clk_unprepare(udc->fclk);
+
+	DBG("%s probe failed, %d\n", driver_name, retval);
+
+	return retval;
+}
+
+static int at91udc_remove(struct platform_device *pdev)
+{
+	struct at91_udc *udc = platform_get_drvdata(pdev);
+	unsigned long	flags;
+
+	DBG("remove\n");
+
+	usb_del_gadget_udc(&udc->gadget);
+	if (udc->driver)
+		return -EBUSY;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	pullup(udc, 0);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	device_init_wakeup(&pdev->dev, 0);
+	remove_debug_file(udc);
+	clk_unprepare(udc->fclk);
+	clk_unprepare(udc->iclk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+	struct at91_udc *udc = platform_get_drvdata(pdev);
+	int		wake = udc->driver && device_may_wakeup(&pdev->dev);
+	unsigned long	flags;
+
+	/* Unless we can act normally to the host (letting it wake us up
+	 * whenever it has work for us) force disconnect.  Wakeup requires
+	 * PLLB for USB events (signaling for reset, wakeup, or incoming
+	 * tokens) and VBUS irqs (on systems which support them).
+	 */
+	if ((!udc->suspended && udc->addr)
+			|| !wake
+			|| at91_suspend_entering_slow_clock()) {
+		spin_lock_irqsave(&udc->lock, flags);
+		pullup(udc, 0);
+		wake = 0;
+		spin_unlock_irqrestore(&udc->lock, flags);
+	} else
+		enable_irq_wake(udc->udp_irq);
+
+	udc->active_suspend = wake;
+	if (udc->board.vbus_pin && !udc->board.vbus_polled && wake)
+		enable_irq_wake(gpiod_to_irq(udc->board.vbus_pin));
+	return 0;
+}
+
+static int at91udc_resume(struct platform_device *pdev)
+{
+	struct at91_udc *udc = platform_get_drvdata(pdev);
+	unsigned long	flags;
+
+	if (udc->board.vbus_pin && !udc->board.vbus_polled &&
+	    udc->active_suspend)
+		disable_irq_wake(gpiod_to_irq(udc->board.vbus_pin));
+
+	/* maybe reconnect to host; if so, clocks on */
+	if (udc->active_suspend)
+		disable_irq_wake(udc->udp_irq);
+	else {
+		spin_lock_irqsave(&udc->lock, flags);
+		pullup(udc, 1);
+		spin_unlock_irqrestore(&udc->lock, flags);
+	}
+	return 0;
+}
+#else
+#define	at91udc_suspend	NULL
+#define	at91udc_resume	NULL
+#endif
+
+static struct platform_driver at91_udc_driver = {
+	.remove		= at91udc_remove,
+	.shutdown	= at91udc_shutdown,
+	.suspend	= at91udc_suspend,
+	.resume		= at91udc_resume,
+	.driver		= {
+		.name	= driver_name,
+		.of_match_table	= at91_udc_dt_ids,
+	},
+};
+
+module_platform_driver_probe(at91_udc_driver, at91udc_probe);
+
+MODULE_DESCRIPTION("AT91 udc driver");
+MODULE_AUTHOR("Thomas Rathbone, David Brownell");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_udc");
diff --git a/drivers/usb/gadget/udc/at91_udc.h b/drivers/usb/gadget/udc/at91_udc.h
new file mode 100644
index 000000000..28c1042f8
--- /dev/null
+++ b/drivers/usb/gadget/udc/at91_udc.h
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2004 by Thomas Rathbone, HP Labs
+ * Copyright (C) 2005 by Ivan Kokshaysky
+ * Copyright (C) 2006 by SAN People
+ */
+
+#ifndef AT91_UDC_H
+#define AT91_UDC_H
+
+/*
+ * USB Device Port (UDP) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ */
+
+#define AT91_UDP_FRM_NUM	0x00		/* Frame Number Register */
+#define     AT91_UDP_NUM	(0x7ff <<  0)	/* Frame Number */
+#define     AT91_UDP_FRM_ERR	(1     << 16)	/* Frame Error */
+#define     AT91_UDP_FRM_OK	(1     << 17)	/* Frame OK */
+
+#define AT91_UDP_GLB_STAT	0x04		/* Global State Register */
+#define     AT91_UDP_FADDEN	(1 <<  0)	/* Function Address Enable */
+#define     AT91_UDP_CONFG	(1 <<  1)	/* Configured */
+#define     AT91_UDP_ESR	(1 <<  2)	/* Enable Send Resume */
+#define     AT91_UDP_RSMINPR	(1 <<  3)	/* Resume has been sent */
+#define     AT91_UDP_RMWUPE	(1 <<  4)	/* Remote Wake Up Enable */
+
+#define AT91_UDP_FADDR		0x08		/* Function Address Register */
+#define     AT91_UDP_FADD	(0x7f << 0)	/* Function Address Value */
+#define     AT91_UDP_FEN	(1    << 8)	/* Function Enable */
+
+#define AT91_UDP_IER		0x10		/* Interrupt Enable Register */
+#define AT91_UDP_IDR		0x14		/* Interrupt Disable Register */
+#define AT91_UDP_IMR		0x18		/* Interrupt Mask Register */
+
+#define AT91_UDP_ISR		0x1c		/* Interrupt Status Register */
+#define     AT91_UDP_EP(n)	(1 << (n))	/* Endpoint Interrupt Status */
+#define     AT91_UDP_RXSUSP	(1 <<  8) 	/* USB Suspend Interrupt Status */
+#define     AT91_UDP_RXRSM	(1 <<  9)	/* USB Resume Interrupt Status */
+#define     AT91_UDP_EXTRSM	(1 << 10)	/* External Resume Interrupt Status [AT91RM9200 only] */
+#define     AT91_UDP_SOFINT	(1 << 11)	/* Start of Frame Interrupt Status */
+#define     AT91_UDP_ENDBUSRES	(1 << 12)	/* End of Bus Reset Interrupt Status */
+#define     AT91_UDP_WAKEUP	(1 << 13)	/* USB Wakeup Interrupt Status [AT91RM9200 only] */
+
+#define AT91_UDP_ICR		0x20		/* Interrupt Clear Register */
+#define AT91_UDP_RST_EP		0x28		/* Reset Endpoint Register */
+
+#define AT91_UDP_CSR(n)		(0x30+((n)*4))	/* Endpoint Control/Status Registers 0-7 */
+#define     AT91_UDP_TXCOMP	(1 <<  0)	/* Generates IN packet with data previously written in DPR */
+#define     AT91_UDP_RX_DATA_BK0 (1 <<  1)	/* Receive Data Bank 0 */
+#define     AT91_UDP_RXSETUP	(1 <<  2)	/* Send STALL to the host */
+#define     AT91_UDP_STALLSENT	(1 <<  3)	/* Stall Sent / Isochronous error (Isochronous endpoints) */
+#define     AT91_UDP_TXPKTRDY	(1 <<  4)	/* Transmit Packet Ready */
+#define     AT91_UDP_FORCESTALL	(1 <<  5)	/* Force Stall */
+#define     AT91_UDP_RX_DATA_BK1 (1 <<  6)	/* Receive Data Bank 1 */
+#define     AT91_UDP_DIR	(1 <<  7)	/* Transfer Direction */
+#define     AT91_UDP_EPTYPE	(7 <<  8)	/* Endpoint Type */
+#define		AT91_UDP_EPTYPE_CTRL		(0 <<  8)
+#define		AT91_UDP_EPTYPE_ISO_OUT		(1 <<  8)
+#define		AT91_UDP_EPTYPE_BULK_OUT	(2 <<  8)
+#define		AT91_UDP_EPTYPE_INT_OUT		(3 <<  8)
+#define		AT91_UDP_EPTYPE_ISO_IN		(5 <<  8)
+#define		AT91_UDP_EPTYPE_BULK_IN		(6 <<  8)
+#define		AT91_UDP_EPTYPE_INT_IN		(7 <<  8)
+#define     AT91_UDP_DTGLE	(1 << 11)	/* Data Toggle */
+#define     AT91_UDP_EPEDS	(1 << 15)	/* Endpoint Enable/Disable */
+#define     AT91_UDP_RXBYTECNT	(0x7ff << 16)	/* Number of bytes in FIFO */
+
+#define AT91_UDP_FDR(n)		(0x50+((n)*4))	/* Endpoint FIFO Data Registers 0-7 */
+
+#define AT91_UDP_TXVC		0x74		/* Transceiver Control Register */
+#define     AT91_UDP_TXVC_TXVDIS (1 << 8)	/* Transceiver Disable */
+#define     AT91_UDP_TXVC_PUON   (1 << 9)	/* PullUp On [AT91SAM9260 only] */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * controller driver data structures
+ */
+
+#define	NUM_ENDPOINTS	6
+
+/*
+ * hardware won't disable bus reset, or resume while the controller
+ * is suspended ... watching suspend helps keep the logic symmetric.
+ */
+#define	MINIMUS_INTERRUPTUS \
+	(AT91_UDP_ENDBUSRES | AT91_UDP_RXRSM | AT91_UDP_RXSUSP)
+
+struct at91_ep {
+	struct usb_ep			ep;
+	struct list_head		queue;
+	struct at91_udc			*udc;
+	void __iomem			*creg;
+
+	unsigned			maxpacket:16;
+	u8				int_mask;
+	unsigned			is_pingpong:1;
+
+	unsigned			stopped:1;
+	unsigned			is_in:1;
+	unsigned			is_iso:1;
+	unsigned			fifo_bank:1;
+};
+
+struct at91_udc_caps {
+	int (*init)(struct at91_udc *udc);
+	void (*pullup)(struct at91_udc *udc, int is_on);
+};
+
+struct at91_udc_data {
+	struct gpio_desc  *vbus_pin;		/* high == host powering us */
+	u8	          vbus_polled;		/* Use polling, not interrupt */
+	struct gpio_desc  *pullup_pin;		/* active == D+ pulled up */
+};
+
+/*
+ * driver is non-SMP, and just blocks IRQs whenever it needs
+ * access protection for chip registers or driver state
+ */
+struct at91_udc {
+	struct usb_gadget		gadget;
+	struct at91_ep			ep[NUM_ENDPOINTS];
+	struct usb_gadget_driver	*driver;
+	const struct at91_udc_caps	*caps;
+	unsigned			vbus:1;
+	unsigned			enabled:1;
+	unsigned			clocked:1;
+	unsigned			suspended:1;
+	unsigned			req_pending:1;
+	unsigned			wait_for_addr_ack:1;
+	unsigned			wait_for_config_ack:1;
+	unsigned			active_suspend:1;
+	u8				addr;
+	struct at91_udc_data		board;
+	struct clk			*iclk, *fclk;
+	struct platform_device		*pdev;
+	struct proc_dir_entry		*pde;
+	void __iomem			*udp_baseaddr;
+	int				udp_irq;
+	spinlock_t			lock;
+	struct timer_list		vbus_timer;
+	struct work_struct		vbus_timer_work;
+	struct regmap			*matrix;
+};
+
+static inline struct at91_udc *to_udc(struct usb_gadget *g)
+{
+	return container_of(g, struct at91_udc, gadget);
+}
+
+struct at91_request {
+	struct usb_request		req;
+	struct list_head		queue;
+};
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef VERBOSE_DEBUG
+#    define VDBG		DBG
+#else
+#    define VDBG(stuff...)	do{}while(0)
+#endif
+
+#ifdef PACKET_TRACE
+#    define PACKET		VDBG
+#else
+#    define PACKET(stuff...)	do{}while(0)
+#endif
+
+#define ERR(stuff...)		pr_err("udc: " stuff)
+#define WARNING(stuff...)	pr_warn("udc: " stuff)
+#define INFO(stuff...)		pr_info("udc: " stuff)
+#define DBG(stuff...)		pr_debug("udc: " stuff)
+
+#endif
+
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
new file mode 100644
index 000000000..53ca38c4b
--- /dev/null
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -0,0 +1,2465 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the Atmel USBA high speed USB device controller
+ *
+ * Copyright (C) 2005-2007 Atmel Corporation
+ */
+#include <linux/clk.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/list.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/ctype.h>
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/irq.h>
+#include <linux/gpio/consumer.h>
+
+#include "atmel_usba_udc.h"
+#define USBA_VBUS_IRQFLAGS (IRQF_ONESHOT \
+			   | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING)
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+
+static int queue_dbg_open(struct inode *inode, struct file *file)
+{
+	struct usba_ep *ep = inode->i_private;
+	struct usba_request *req, *req_copy;
+	struct list_head *queue_data;
+
+	queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL);
+	if (!queue_data)
+		return -ENOMEM;
+	INIT_LIST_HEAD(queue_data);
+
+	spin_lock_irq(&ep->udc->lock);
+	list_for_each_entry(req, &ep->queue, queue) {
+		req_copy = kmemdup(req, sizeof(*req_copy), GFP_ATOMIC);
+		if (!req_copy)
+			goto fail;
+		list_add_tail(&req_copy->queue, queue_data);
+	}
+	spin_unlock_irq(&ep->udc->lock);
+
+	file->private_data = queue_data;
+	return 0;
+
+fail:
+	spin_unlock_irq(&ep->udc->lock);
+	list_for_each_entry_safe(req, req_copy, queue_data, queue) {
+		list_del(&req->queue);
+		kfree(req);
+	}
+	kfree(queue_data);
+	return -ENOMEM;
+}
+
+/*
+ * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0
+ *
+ * b: buffer address
+ * l: buffer length
+ * I/i: interrupt/no interrupt
+ * Z/z: zero/no zero
+ * S/s: short ok/short not ok
+ * s: status
+ * n: nr_packets
+ * F/f: submitted/not submitted to FIFO
+ * D/d: using/not using DMA
+ * L/l: last transaction/not last transaction
+ */
+static ssize_t queue_dbg_read(struct file *file, char __user *buf,
+		size_t nbytes, loff_t *ppos)
+{
+	struct list_head *queue = file->private_data;
+	struct usba_request *req, *tmp_req;
+	size_t len, remaining, actual = 0;
+	char tmpbuf[38];
+
+	if (!access_ok(buf, nbytes))
+		return -EFAULT;
+
+	inode_lock(file_inode(file));
+	list_for_each_entry_safe(req, tmp_req, queue, queue) {
+		len = snprintf(tmpbuf, sizeof(tmpbuf),
+				"%8p %08x %c%c%c %5d %c%c%c\n",
+				req->req.buf, req->req.length,
+				req->req.no_interrupt ? 'i' : 'I',
+				req->req.zero ? 'Z' : 'z',
+				req->req.short_not_ok ? 's' : 'S',
+				req->req.status,
+				req->submitted ? 'F' : 'f',
+				req->using_dma ? 'D' : 'd',
+				req->last_transaction ? 'L' : 'l');
+		len = min(len, sizeof(tmpbuf));
+		if (len > nbytes)
+			break;
+
+		list_del(&req->queue);
+		kfree(req);
+
+		remaining = __copy_to_user(buf, tmpbuf, len);
+		actual += len - remaining;
+		if (remaining)
+			break;
+
+		nbytes -= len;
+		buf += len;
+	}
+	inode_unlock(file_inode(file));
+
+	return actual;
+}
+
+static int queue_dbg_release(struct inode *inode, struct file *file)
+{
+	struct list_head *queue_data = file->private_data;
+	struct usba_request *req, *tmp_req;
+
+	list_for_each_entry_safe(req, tmp_req, queue_data, queue) {
+		list_del(&req->queue);
+		kfree(req);
+	}
+	kfree(queue_data);
+	return 0;
+}
+
+static int regs_dbg_open(struct inode *inode, struct file *file)
+{
+	struct usba_udc *udc;
+	unsigned int i;
+	u32 *data;
+	int ret = -ENOMEM;
+
+	inode_lock(inode);
+	udc = inode->i_private;
+	data = kmalloc(inode->i_size, GFP_KERNEL);
+	if (!data)
+		goto out;
+
+	spin_lock_irq(&udc->lock);
+	for (i = 0; i < inode->i_size / 4; i++)
+		data[i] = readl_relaxed(udc->regs + i * 4);
+	spin_unlock_irq(&udc->lock);
+
+	file->private_data = data;
+	ret = 0;
+
+out:
+	inode_unlock(inode);
+
+	return ret;
+}
+
+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
+		size_t nbytes, loff_t *ppos)
+{
+	struct inode *inode = file_inode(file);
+	int ret;
+
+	inode_lock(inode);
+	ret = simple_read_from_buffer(buf, nbytes, ppos,
+			file->private_data,
+			file_inode(file)->i_size);
+	inode_unlock(inode);
+
+	return ret;
+}
+
+static int regs_dbg_release(struct inode *inode, struct file *file)
+{
+	kfree(file->private_data);
+	return 0;
+}
+
+static const struct file_operations queue_dbg_fops = {
+	.owner		= THIS_MODULE,
+	.open		= queue_dbg_open,
+	.llseek		= no_llseek,
+	.read		= queue_dbg_read,
+	.release	= queue_dbg_release,
+};
+
+static const struct file_operations regs_dbg_fops = {
+	.owner		= THIS_MODULE,
+	.open		= regs_dbg_open,
+	.llseek		= generic_file_llseek,
+	.read		= regs_dbg_read,
+	.release	= regs_dbg_release,
+};
+
+static void usba_ep_init_debugfs(struct usba_udc *udc,
+		struct usba_ep *ep)
+{
+	struct dentry *ep_root;
+
+	ep_root = debugfs_create_dir(ep->ep.name, udc->debugfs_root);
+	ep->debugfs_dir = ep_root;
+
+	debugfs_create_file("queue", 0400, ep_root, ep, &queue_dbg_fops);
+	if (ep->can_dma)
+		debugfs_create_u32("dma_status", 0400, ep_root,
+				   &ep->last_dma_status);
+	if (ep_is_control(ep))
+		debugfs_create_u32("state", 0400, ep_root, &ep->state);
+}
+
+static void usba_ep_cleanup_debugfs(struct usba_ep *ep)
+{
+	debugfs_remove_recursive(ep->debugfs_dir);
+}
+
+static void usba_init_debugfs(struct usba_udc *udc)
+{
+	struct dentry *root;
+	struct resource *regs_resource;
+
+	root = debugfs_create_dir(udc->gadget.name, usb_debug_root);
+	udc->debugfs_root = root;
+
+	regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM,
+				CTRL_IOMEM_ID);
+
+	if (regs_resource) {
+		debugfs_create_file_size("regs", 0400, root, udc,
+					 &regs_dbg_fops,
+					 resource_size(regs_resource));
+	}
+
+	usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0));
+}
+
+static void usba_cleanup_debugfs(struct usba_udc *udc)
+{
+	usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0));
+	debugfs_remove_recursive(udc->debugfs_root);
+}
+#else
+static inline void usba_ep_init_debugfs(struct usba_udc *udc,
+					 struct usba_ep *ep)
+{
+
+}
+
+static inline void usba_ep_cleanup_debugfs(struct usba_ep *ep)
+{
+
+}
+
+static inline void usba_init_debugfs(struct usba_udc *udc)
+{
+
+}
+
+static inline void usba_cleanup_debugfs(struct usba_udc *udc)
+{
+
+}
+#endif
+
+static ushort fifo_mode;
+
+module_param(fifo_mode, ushort, 0x0);
+MODULE_PARM_DESC(fifo_mode, "Endpoint configuration mode");
+
+/* mode 0 - uses autoconfig */
+
+/* mode 1 - fits in 8KB, generic max fifo configuration */
+static struct usba_fifo_cfg mode_1_cfg[] = {
+{ .hw_ep_num = 0, .fifo_size = 64,	.nr_banks = 1, },
+{ .hw_ep_num = 1, .fifo_size = 1024,	.nr_banks = 2, },
+{ .hw_ep_num = 2, .fifo_size = 1024,	.nr_banks = 1, },
+{ .hw_ep_num = 3, .fifo_size = 1024,	.nr_banks = 1, },
+{ .hw_ep_num = 4, .fifo_size = 1024,	.nr_banks = 1, },
+{ .hw_ep_num = 5, .fifo_size = 1024,	.nr_banks = 1, },
+{ .hw_ep_num = 6, .fifo_size = 1024,	.nr_banks = 1, },
+};
+
+/* mode 2 - fits in 8KB, performance max fifo configuration */
+static struct usba_fifo_cfg mode_2_cfg[] = {
+{ .hw_ep_num = 0, .fifo_size = 64,	.nr_banks = 1, },
+{ .hw_ep_num = 1, .fifo_size = 1024,	.nr_banks = 3, },
+{ .hw_ep_num = 2, .fifo_size = 1024,	.nr_banks = 2, },
+{ .hw_ep_num = 3, .fifo_size = 1024,	.nr_banks = 2, },
+};
+
+/* mode 3 - fits in 8KB, mixed fifo configuration */
+static struct usba_fifo_cfg mode_3_cfg[] = {
+{ .hw_ep_num = 0, .fifo_size = 64,	.nr_banks = 1, },
+{ .hw_ep_num = 1, .fifo_size = 1024,	.nr_banks = 2, },
+{ .hw_ep_num = 2, .fifo_size = 512,	.nr_banks = 2, },
+{ .hw_ep_num = 3, .fifo_size = 512,	.nr_banks = 2, },
+{ .hw_ep_num = 4, .fifo_size = 512,	.nr_banks = 2, },
+{ .hw_ep_num = 5, .fifo_size = 512,	.nr_banks = 2, },
+{ .hw_ep_num = 6, .fifo_size = 512,	.nr_banks = 2, },
+};
+
+/* mode 4 - fits in 8KB, custom fifo configuration */
+static struct usba_fifo_cfg mode_4_cfg[] = {
+{ .hw_ep_num = 0, .fifo_size = 64,	.nr_banks = 1, },
+{ .hw_ep_num = 1, .fifo_size = 512,	.nr_banks = 2, },
+{ .hw_ep_num = 2, .fifo_size = 512,	.nr_banks = 2, },
+{ .hw_ep_num = 3, .fifo_size = 8,	.nr_banks = 2, },
+{ .hw_ep_num = 4, .fifo_size = 512,	.nr_banks = 2, },
+{ .hw_ep_num = 5, .fifo_size = 512,	.nr_banks = 2, },
+{ .hw_ep_num = 6, .fifo_size = 16,	.nr_banks = 2, },
+{ .hw_ep_num = 7, .fifo_size = 8,	.nr_banks = 2, },
+{ .hw_ep_num = 8, .fifo_size = 8,	.nr_banks = 2, },
+};
+/* Add additional configurations here */
+
+static int usba_config_fifo_table(struct usba_udc *udc)
+{
+	int n;
+
+	switch (fifo_mode) {
+	default:
+		fifo_mode = 0;
+		fallthrough;
+	case 0:
+		udc->fifo_cfg = NULL;
+		n = 0;
+		break;
+	case 1:
+		udc->fifo_cfg = mode_1_cfg;
+		n = ARRAY_SIZE(mode_1_cfg);
+		break;
+	case 2:
+		udc->fifo_cfg = mode_2_cfg;
+		n = ARRAY_SIZE(mode_2_cfg);
+		break;
+	case 3:
+		udc->fifo_cfg = mode_3_cfg;
+		n = ARRAY_SIZE(mode_3_cfg);
+		break;
+	case 4:
+		udc->fifo_cfg = mode_4_cfg;
+		n = ARRAY_SIZE(mode_4_cfg);
+		break;
+	}
+	DBG(DBG_HW, "Setup fifo_mode %d\n", fifo_mode);
+
+	return n;
+}
+
+static inline u32 usba_int_enb_get(struct usba_udc *udc)
+{
+	return udc->int_enb_cache;
+}
+
+static inline void usba_int_enb_set(struct usba_udc *udc, u32 mask)
+{
+	u32 val;
+
+	val = udc->int_enb_cache | mask;
+	usba_writel(udc, INT_ENB, val);
+	udc->int_enb_cache = val;
+}
+
+static inline void usba_int_enb_clear(struct usba_udc *udc, u32 mask)
+{
+	u32 val;
+
+	val = udc->int_enb_cache & ~mask;
+	usba_writel(udc, INT_ENB, val);
+	udc->int_enb_cache = val;
+}
+
+static int vbus_is_present(struct usba_udc *udc)
+{
+	if (udc->vbus_pin)
+		return gpiod_get_value(udc->vbus_pin);
+
+	/* No Vbus detection: Assume always present */
+	return 1;
+}
+
+static void toggle_bias(struct usba_udc *udc, int is_on)
+{
+	if (udc->errata && udc->errata->toggle_bias)
+		udc->errata->toggle_bias(udc, is_on);
+}
+
+static void generate_bias_pulse(struct usba_udc *udc)
+{
+	if (!udc->bias_pulse_needed)
+		return;
+
+	if (udc->errata && udc->errata->pulse_bias)
+		udc->errata->pulse_bias(udc);
+
+	udc->bias_pulse_needed = false;
+}
+
+static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
+{
+	unsigned int transaction_len;
+
+	transaction_len = req->req.length - req->req.actual;
+	req->last_transaction = 1;
+	if (transaction_len > ep->ep.maxpacket) {
+		transaction_len = ep->ep.maxpacket;
+		req->last_transaction = 0;
+	} else if (transaction_len == ep->ep.maxpacket && req->req.zero)
+		req->last_transaction = 0;
+
+	DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n",
+		ep->ep.name, req, transaction_len,
+		req->last_transaction ? ", done" : "");
+
+	memcpy_toio(ep->fifo, req->req.buf + req->req.actual, transaction_len);
+	usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
+	req->req.actual += transaction_len;
+}
+
+static void submit_request(struct usba_ep *ep, struct usba_request *req)
+{
+	DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n",
+		ep->ep.name, req, req->req.length);
+
+	req->req.actual = 0;
+	req->submitted = 1;
+
+	if (req->using_dma) {
+		if (req->req.length == 0) {
+			usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
+			return;
+		}
+
+		if (req->req.zero)
+			usba_ep_writel(ep, CTL_ENB, USBA_SHORT_PACKET);
+		else
+			usba_ep_writel(ep, CTL_DIS, USBA_SHORT_PACKET);
+
+		usba_dma_writel(ep, ADDRESS, req->req.dma);
+		usba_dma_writel(ep, CONTROL, req->ctrl);
+	} else {
+		next_fifo_transaction(ep, req);
+		if (req->last_transaction) {
+			usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
+			if (ep_is_control(ep))
+				usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
+		} else {
+			if (ep_is_control(ep))
+				usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+			usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
+		}
+	}
+}
+
+static void submit_next_request(struct usba_ep *ep)
+{
+	struct usba_request *req;
+
+	if (list_empty(&ep->queue)) {
+		usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY | USBA_RX_BK_RDY);
+		return;
+	}
+
+	req = list_entry(ep->queue.next, struct usba_request, queue);
+	if (!req->submitted)
+		submit_request(ep, req);
+}
+
+static void send_status(struct usba_udc *udc, struct usba_ep *ep)
+{
+	ep->state = STATUS_STAGE_IN;
+	usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
+	usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
+}
+
+static void receive_data(struct usba_ep *ep)
+{
+	struct usba_udc *udc = ep->udc;
+	struct usba_request *req;
+	unsigned long status;
+	unsigned int bytecount, nr_busy;
+	int is_complete = 0;
+
+	status = usba_ep_readl(ep, STA);
+	nr_busy = USBA_BFEXT(BUSY_BANKS, status);
+
+	DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy);
+
+	while (nr_busy > 0) {
+		if (list_empty(&ep->queue)) {
+			usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
+			break;
+		}
+		req = list_entry(ep->queue.next,
+				 struct usba_request, queue);
+
+		bytecount = USBA_BFEXT(BYTE_COUNT, status);
+
+		if (status & (1 << 31))
+			is_complete = 1;
+		if (req->req.actual + bytecount >= req->req.length) {
+			is_complete = 1;
+			bytecount = req->req.length - req->req.actual;
+		}
+
+		memcpy_fromio(req->req.buf + req->req.actual,
+				ep->fifo, bytecount);
+		req->req.actual += bytecount;
+
+		usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
+
+		if (is_complete) {
+			DBG(DBG_QUEUE, "%s: request done\n", ep->ep.name);
+			req->req.status = 0;
+			list_del_init(&req->queue);
+			usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
+			spin_unlock(&udc->lock);
+			usb_gadget_giveback_request(&ep->ep, &req->req);
+			spin_lock(&udc->lock);
+		}
+
+		status = usba_ep_readl(ep, STA);
+		nr_busy = USBA_BFEXT(BUSY_BANKS, status);
+
+		if (is_complete && ep_is_control(ep)) {
+			send_status(udc, ep);
+			break;
+		}
+	}
+}
+
+static void
+request_complete(struct usba_ep *ep, struct usba_request *req, int status)
+{
+	struct usba_udc *udc = ep->udc;
+
+	WARN_ON(!list_empty(&req->queue));
+
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+
+	if (req->using_dma)
+		usb_gadget_unmap_request(&udc->gadget, &req->req, ep->is_in);
+
+	DBG(DBG_GADGET | DBG_REQ,
+		"%s: req %p complete: status %d, actual %u\n",
+		ep->ep.name, req, req->req.status, req->req.actual);
+
+	spin_unlock(&udc->lock);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&udc->lock);
+}
+
+static void
+request_complete_list(struct usba_ep *ep, struct list_head *list, int status)
+{
+	struct usba_request *req, *tmp_req;
+
+	list_for_each_entry_safe(req, tmp_req, list, queue) {
+		list_del_init(&req->queue);
+		request_complete(ep, req, status);
+	}
+}
+
+static int
+usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+{
+	struct usba_ep *ep = to_usba_ep(_ep);
+	struct usba_udc *udc = ep->udc;
+	unsigned long flags, maxpacket;
+	unsigned int nr_trans;
+
+	DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc);
+
+	maxpacket = usb_endpoint_maxp(desc);
+
+	if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index)
+			|| ep->index == 0
+			|| desc->bDescriptorType != USB_DT_ENDPOINT
+			|| maxpacket == 0
+			|| maxpacket > ep->fifo_size) {
+		DBG(DBG_ERR, "ep_enable: Invalid argument");
+		return -EINVAL;
+	}
+
+	ep->is_isoc = 0;
+	ep->is_in = 0;
+
+	DBG(DBG_ERR, "%s: EPT_CFG = 0x%lx (maxpacket = %lu)\n",
+			ep->ep.name, ep->ept_cfg, maxpacket);
+
+	if (usb_endpoint_dir_in(desc)) {
+		ep->is_in = 1;
+		ep->ept_cfg |= USBA_EPT_DIR_IN;
+	}
+
+	switch (usb_endpoint_type(desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (!ep->can_isoc) {
+			DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
+					ep->ep.name);
+			return -EINVAL;
+		}
+
+		/*
+		 * Bits 11:12 specify number of _additional_
+		 * transactions per microframe.
+		 */
+		nr_trans = usb_endpoint_maxp_mult(desc);
+		if (nr_trans > 3)
+			return -EINVAL;
+
+		ep->is_isoc = 1;
+		ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO);
+		ep->ept_cfg |= USBA_BF(NB_TRANS, nr_trans);
+
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK);
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT);
+		break;
+	}
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+
+	ep->ep.desc = desc;
+	ep->ep.maxpacket = maxpacket;
+
+	usba_ep_writel(ep, CFG, ep->ept_cfg);
+	usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
+
+	if (ep->can_dma) {
+		u32 ctrl;
+
+		usba_int_enb_set(udc, USBA_BF(EPT_INT, 1 << ep->index) |
+				      USBA_BF(DMA_INT, 1 << ep->index));
+		ctrl = USBA_AUTO_VALID | USBA_INTDIS_DMA;
+		usba_ep_writel(ep, CTL_ENB, ctrl);
+	} else {
+		usba_int_enb_set(udc, USBA_BF(EPT_INT, 1 << ep->index));
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index,
+			(unsigned long)usba_ep_readl(ep, CFG));
+	DBG(DBG_HW, "INT_ENB after init: %#08lx\n",
+			(unsigned long)usba_int_enb_get(udc));
+
+	return 0;
+}
+
+static int usba_ep_disable(struct usb_ep *_ep)
+{
+	struct usba_ep *ep = to_usba_ep(_ep);
+	struct usba_udc *udc = ep->udc;
+	LIST_HEAD(req_list);
+	unsigned long flags;
+
+	DBG(DBG_GADGET, "ep_disable: %s\n", ep->ep.name);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (!ep->ep.desc) {
+		spin_unlock_irqrestore(&udc->lock, flags);
+		DBG(DBG_ERR, "ep_disable: %s not enabled\n", ep->ep.name);
+		return -EINVAL;
+	}
+	ep->ep.desc = NULL;
+
+	list_splice_init(&ep->queue, &req_list);
+	if (ep->can_dma) {
+		usba_dma_writel(ep, CONTROL, 0);
+		usba_dma_writel(ep, ADDRESS, 0);
+		usba_dma_readl(ep, STATUS);
+	}
+	usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE);
+	usba_int_enb_clear(udc, USBA_BF(EPT_INT, 1 << ep->index));
+
+	request_complete_list(ep, &req_list, -ESHUTDOWN);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static struct usb_request *
+usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct usba_request *req;
+
+	DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags);
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void
+usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct usba_request *req = to_usba_req(_req);
+
+	DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req);
+
+	kfree(req);
+}
+
+static int queue_dma(struct usba_udc *udc, struct usba_ep *ep,
+		struct usba_request *req, gfp_t gfp_flags)
+{
+	unsigned long flags;
+	int ret;
+
+	DBG(DBG_DMA, "%s: req l/%u d/%pad %c%c%c\n",
+		ep->ep.name, req->req.length, &req->req.dma,
+		req->req.zero ? 'Z' : 'z',
+		req->req.short_not_ok ? 'S' : 's',
+		req->req.no_interrupt ? 'I' : 'i');
+
+	if (req->req.length > 0x10000) {
+		/* Lengths from 0 to 65536 (inclusive) are supported */
+		DBG(DBG_ERR, "invalid request length %u\n", req->req.length);
+		return -EINVAL;
+	}
+
+	ret = usb_gadget_map_request(&udc->gadget, &req->req, ep->is_in);
+	if (ret)
+		return ret;
+
+	req->using_dma = 1;
+	req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length)
+			| USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE
+			| USBA_DMA_END_BUF_EN;
+
+	if (!ep->is_in)
+		req->ctrl |= USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE;
+
+	/*
+	 * Add this request to the queue and submit for DMA if
+	 * possible. Check if we're still alive first -- we may have
+	 * received a reset since last time we checked.
+	 */
+	ret = -ESHUTDOWN;
+	spin_lock_irqsave(&udc->lock, flags);
+	if (ep->ep.desc) {
+		if (list_empty(&ep->queue))
+			submit_request(ep, req);
+
+		list_add_tail(&req->queue, &ep->queue);
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return ret;
+}
+
+static int
+usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct usba_request *req = to_usba_req(_req);
+	struct usba_ep *ep = to_usba_ep(_ep);
+	struct usba_udc *udc = ep->udc;
+	unsigned long flags;
+	int ret;
+
+	DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n",
+			ep->ep.name, req, _req->length);
+
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN ||
+	    !ep->ep.desc)
+		return -ESHUTDOWN;
+
+	req->submitted = 0;
+	req->using_dma = 0;
+	req->last_transaction = 0;
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	if (ep->can_dma)
+		return queue_dma(udc, ep, req, gfp_flags);
+
+	/* May have received a reset since last time we checked */
+	ret = -ESHUTDOWN;
+	spin_lock_irqsave(&udc->lock, flags);
+	if (ep->ep.desc) {
+		list_add_tail(&req->queue, &ep->queue);
+
+		if ((!ep_is_control(ep) && ep->is_in) ||
+			(ep_is_control(ep)
+				&& (ep->state == DATA_STAGE_IN
+					|| ep->state == STATUS_STAGE_IN)))
+			usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
+		else
+			usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return ret;
+}
+
+static void
+usba_update_req(struct usba_ep *ep, struct usba_request *req, u32 status)
+{
+	req->req.actual = req->req.length - USBA_BFEXT(DMA_BUF_LEN, status);
+}
+
+static int stop_dma(struct usba_ep *ep, u32 *pstatus)
+{
+	unsigned int timeout;
+	u32 status;
+
+	/*
+	 * Stop the DMA controller. When writing both CH_EN
+	 * and LINK to 0, the other bits are not affected.
+	 */
+	usba_dma_writel(ep, CONTROL, 0);
+
+	/* Wait for the FIFO to empty */
+	for (timeout = 40; timeout; --timeout) {
+		status = usba_dma_readl(ep, STATUS);
+		if (!(status & USBA_DMA_CH_EN))
+			break;
+		udelay(1);
+	}
+
+	if (pstatus)
+		*pstatus = status;
+
+	if (timeout == 0) {
+		dev_err(&ep->udc->pdev->dev,
+			"%s: timed out waiting for DMA FIFO to empty\n",
+			ep->ep.name);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct usba_ep *ep = to_usba_ep(_ep);
+	struct usba_udc *udc = ep->udc;
+	struct usba_request *req = NULL;
+	struct usba_request *iter;
+	unsigned long flags;
+	u32 status;
+
+	DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n",
+			ep->ep.name, _req);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		req = iter;
+		break;
+	}
+
+	if (!req) {
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return -EINVAL;
+	}
+
+	if (req->using_dma) {
+		/*
+		 * If this request is currently being transferred,
+		 * stop the DMA controller and reset the FIFO.
+		 */
+		if (ep->queue.next == &req->queue) {
+			status = usba_dma_readl(ep, STATUS);
+			if (status & USBA_DMA_CH_EN)
+				stop_dma(ep, &status);
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+			ep->last_dma_status = status;
+#endif
+
+			usba_writel(udc, EPT_RST, 1 << ep->index);
+
+			usba_update_req(ep, req, status);
+		}
+	}
+
+	/*
+	 * Errors should stop the queue from advancing until the
+	 * completion function returns.
+	 */
+	list_del_init(&req->queue);
+
+	request_complete(ep, req, -ECONNRESET);
+
+	/* Process the next request if any */
+	submit_next_request(ep);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int usba_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	struct usba_ep *ep = to_usba_ep(_ep);
+	struct usba_udc *udc = ep->udc;
+	unsigned long flags;
+	int ret = 0;
+
+	DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name,
+			value ? "set" : "clear");
+
+	if (!ep->ep.desc) {
+		DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
+				ep->ep.name);
+		return -ENODEV;
+	}
+	if (ep->is_isoc) {
+		DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
+				ep->ep.name);
+		return -ENOTTY;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/*
+	 * We can't halt IN endpoints while there are still data to be
+	 * transferred
+	 */
+	if (!list_empty(&ep->queue)
+			|| ((value && ep->is_in && (usba_ep_readl(ep, STA)
+					& USBA_BF(BUSY_BANKS, -1L))))) {
+		ret = -EAGAIN;
+	} else {
+		if (value)
+			usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
+		else
+			usba_ep_writel(ep, CLR_STA,
+					USBA_FORCE_STALL | USBA_TOGGLE_CLR);
+		usba_ep_readl(ep, STA);
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return ret;
+}
+
+static int usba_ep_fifo_status(struct usb_ep *_ep)
+{
+	struct usba_ep *ep = to_usba_ep(_ep);
+
+	return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
+}
+
+static void usba_ep_fifo_flush(struct usb_ep *_ep)
+{
+	struct usba_ep *ep = to_usba_ep(_ep);
+	struct usba_udc *udc = ep->udc;
+
+	usba_writel(udc, EPT_RST, 1 << ep->index);
+}
+
+static const struct usb_ep_ops usba_ep_ops = {
+	.enable		= usba_ep_enable,
+	.disable	= usba_ep_disable,
+	.alloc_request	= usba_ep_alloc_request,
+	.free_request	= usba_ep_free_request,
+	.queue		= usba_ep_queue,
+	.dequeue	= usba_ep_dequeue,
+	.set_halt	= usba_ep_set_halt,
+	.fifo_status	= usba_ep_fifo_status,
+	.fifo_flush	= usba_ep_fifo_flush,
+};
+
+static int usba_udc_get_frame(struct usb_gadget *gadget)
+{
+	struct usba_udc *udc = to_usba_udc(gadget);
+
+	return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM));
+}
+
+static int usba_udc_wakeup(struct usb_gadget *gadget)
+{
+	struct usba_udc *udc = to_usba_udc(gadget);
+	unsigned long flags;
+	u32 ctrl;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (udc->devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
+		ctrl = usba_readl(udc, CTRL);
+		usba_writel(udc, CTRL, ctrl | USBA_REMOTE_WAKE_UP);
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return ret;
+}
+
+static int
+usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered)
+{
+	struct usba_udc *udc = to_usba_udc(gadget);
+	unsigned long flags;
+
+	gadget->is_selfpowered = (is_selfpowered != 0);
+	spin_lock_irqsave(&udc->lock, flags);
+	if (is_selfpowered)
+		udc->devstatus |= 1 << USB_DEVICE_SELF_POWERED;
+	else
+		udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int atmel_usba_pullup(struct usb_gadget *gadget, int is_on);
+static int atmel_usba_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver);
+static int atmel_usba_stop(struct usb_gadget *gadget);
+
+static struct usb_ep *atmel_usba_match_ep(struct usb_gadget *gadget,
+				struct usb_endpoint_descriptor	*desc,
+				struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+	struct usb_ep	*_ep;
+	struct usba_ep *ep;
+
+	/* Look at endpoints until an unclaimed one looks usable */
+	list_for_each_entry(_ep, &gadget->ep_list, ep_list) {
+		if (usb_gadget_ep_match_desc(gadget, _ep, desc, ep_comp))
+			goto found_ep;
+	}
+	/* Fail */
+	return NULL;
+
+found_ep:
+
+	if (fifo_mode == 0) {
+		/* Optimize hw fifo size based on ep type and other info */
+		ep = to_usba_ep(_ep);
+
+		switch (usb_endpoint_type(desc)) {
+		case USB_ENDPOINT_XFER_CONTROL:
+			ep->nr_banks = 1;
+			break;
+
+		case USB_ENDPOINT_XFER_ISOC:
+			ep->fifo_size = 1024;
+			if (ep->udc->ep_prealloc)
+				ep->nr_banks = 2;
+			break;
+
+		case USB_ENDPOINT_XFER_BULK:
+			ep->fifo_size = 512;
+			if (ep->udc->ep_prealloc)
+				ep->nr_banks = 1;
+			break;
+
+		case USB_ENDPOINT_XFER_INT:
+			if (desc->wMaxPacketSize == 0)
+				ep->fifo_size =
+				    roundup_pow_of_two(_ep->maxpacket_limit);
+			else
+				ep->fifo_size =
+				    roundup_pow_of_two(le16_to_cpu(desc->wMaxPacketSize));
+			if (ep->udc->ep_prealloc)
+				ep->nr_banks = 1;
+			break;
+		}
+
+		/* It might be a little bit late to set this */
+		usb_ep_set_maxpacket_limit(&ep->ep, ep->fifo_size);
+
+		/* Generate ept_cfg basd on FIFO size and number of banks */
+		if (ep->fifo_size  <= 8)
+			ep->ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8);
+		else
+			/* LSB is bit 1, not 0 */
+			ep->ept_cfg =
+				USBA_BF(EPT_SIZE, fls(ep->fifo_size - 1) - 3);
+
+		ep->ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks);
+	}
+
+	return _ep;
+}
+
+static const struct usb_gadget_ops usba_udc_ops = {
+	.get_frame		= usba_udc_get_frame,
+	.wakeup			= usba_udc_wakeup,
+	.set_selfpowered	= usba_udc_set_selfpowered,
+	.pullup			= atmel_usba_pullup,
+	.udc_start		= atmel_usba_start,
+	.udc_stop		= atmel_usba_stop,
+	.match_ep		= atmel_usba_match_ep,
+};
+
+static struct usb_endpoint_descriptor usba_ep0_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+	.bEndpointAddress = 0,
+	.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize = cpu_to_le16(64),
+	/* FIXME: I have no idea what to put here */
+	.bInterval = 1,
+};
+
+static const struct usb_gadget usba_gadget_template = {
+	.ops		= &usba_udc_ops,
+	.max_speed	= USB_SPEED_HIGH,
+	.name		= "atmel_usba_udc",
+};
+
+/*
+ * Called with interrupts disabled and udc->lock held.
+ */
+static void reset_all_endpoints(struct usba_udc *udc)
+{
+	struct usba_ep *ep;
+	struct usba_request *req, *tmp_req;
+
+	usba_writel(udc, EPT_RST, ~0UL);
+
+	ep = to_usba_ep(udc->gadget.ep0);
+	list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) {
+		list_del_init(&req->queue);
+		request_complete(ep, req, -ECONNRESET);
+	}
+}
+
+static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex)
+{
+	struct usba_ep *ep;
+
+	if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
+		return to_usba_ep(udc->gadget.ep0);
+
+	list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
+		u8 bEndpointAddress;
+
+		if (!ep->ep.desc)
+			continue;
+		bEndpointAddress = ep->ep.desc->bEndpointAddress;
+		if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
+			continue;
+		if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
+				== (wIndex & USB_ENDPOINT_NUMBER_MASK))
+			return ep;
+	}
+
+	return NULL;
+}
+
+/* Called with interrupts disabled and udc->lock held */
+static inline void set_protocol_stall(struct usba_udc *udc, struct usba_ep *ep)
+{
+	usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
+	ep->state = WAIT_FOR_SETUP;
+}
+
+static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep)
+{
+	if (usba_ep_readl(ep, STA) & USBA_FORCE_STALL)
+		return 1;
+	return 0;
+}
+
+static inline void set_address(struct usba_udc *udc, unsigned int addr)
+{
+	u32 regval;
+
+	DBG(DBG_BUS, "setting address %u...\n", addr);
+	regval = usba_readl(udc, CTRL);
+	regval = USBA_BFINS(DEV_ADDR, addr, regval);
+	usba_writel(udc, CTRL, regval);
+}
+
+static int do_test_mode(struct usba_udc *udc)
+{
+	static const char test_packet_buffer[] = {
+		/* JKJKJKJK * 9 */
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		/* JJKKJJKK * 8 */
+		0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
+		/* JJKKJJKK * 8 */
+		0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
+		/* JJJJJJJKKKKKKK * 8 */
+		0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+		0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+		/* JJJJJJJK * 8 */
+		0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
+		/* {JKKKKKKK * 10}, JK */
+		0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E
+	};
+	struct usba_ep *ep;
+	struct device *dev = &udc->pdev->dev;
+	int test_mode;
+
+	test_mode = udc->test_mode;
+
+	/* Start from a clean slate */
+	reset_all_endpoints(udc);
+
+	switch (test_mode) {
+	case 0x0100:
+		/* Test_J */
+		usba_writel(udc, TST, USBA_TST_J_MODE);
+		dev_info(dev, "Entering Test_J mode...\n");
+		break;
+	case 0x0200:
+		/* Test_K */
+		usba_writel(udc, TST, USBA_TST_K_MODE);
+		dev_info(dev, "Entering Test_K mode...\n");
+		break;
+	case 0x0300:
+		/*
+		 * Test_SE0_NAK: Force high-speed mode and set up ep0
+		 * for Bulk IN transfers
+		 */
+		ep = &udc->usba_ep[0];
+		usba_writel(udc, TST,
+				USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH));
+		usba_ep_writel(ep, CFG,
+				USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
+				| USBA_EPT_DIR_IN
+				| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
+				| USBA_BF(BK_NUMBER, 1));
+		if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
+			set_protocol_stall(udc, ep);
+			dev_err(dev, "Test_SE0_NAK: ep0 not mapped\n");
+		} else {
+			usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
+			dev_info(dev, "Entering Test_SE0_NAK mode...\n");
+		}
+		break;
+	case 0x0400:
+		/* Test_Packet */
+		ep = &udc->usba_ep[0];
+		usba_ep_writel(ep, CFG,
+				USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
+				| USBA_EPT_DIR_IN
+				| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
+				| USBA_BF(BK_NUMBER, 1));
+		if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
+			set_protocol_stall(udc, ep);
+			dev_err(dev, "Test_Packet: ep0 not mapped\n");
+		} else {
+			usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
+			usba_writel(udc, TST, USBA_TST_PKT_MODE);
+			memcpy_toio(ep->fifo, test_packet_buffer,
+					sizeof(test_packet_buffer));
+			usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
+			dev_info(dev, "Entering Test_Packet mode...\n");
+		}
+		break;
+	default:
+		dev_err(dev, "Invalid test mode: 0x%04x\n", test_mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Avoid overly long expressions */
+static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq)
+{
+	if (crq->wValue == cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
+		return true;
+	return false;
+}
+
+static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq)
+{
+	if (crq->wValue == cpu_to_le16(USB_DEVICE_TEST_MODE))
+		return true;
+	return false;
+}
+
+static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
+{
+	if (crq->wValue == cpu_to_le16(USB_ENDPOINT_HALT))
+		return true;
+	return false;
+}
+
+static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
+		struct usb_ctrlrequest *crq)
+{
+	int retval = 0;
+
+	switch (crq->bRequest) {
+	case USB_REQ_GET_STATUS: {
+		u16 status;
+
+		if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
+			status = cpu_to_le16(udc->devstatus);
+		} else if (crq->bRequestType
+				== (USB_DIR_IN | USB_RECIP_INTERFACE)) {
+			status = cpu_to_le16(0);
+		} else if (crq->bRequestType
+				== (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
+			struct usba_ep *target;
+
+			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
+			if (!target)
+				goto stall;
+
+			status = 0;
+			if (is_stalled(udc, target))
+				status |= cpu_to_le16(1);
+		} else
+			goto delegate;
+
+		/* Write directly to the FIFO. No queueing is done. */
+		if (crq->wLength != cpu_to_le16(sizeof(status)))
+			goto stall;
+		ep->state = DATA_STAGE_IN;
+		writew_relaxed(status, ep->fifo);
+		usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
+		break;
+	}
+
+	case USB_REQ_CLEAR_FEATURE: {
+		if (crq->bRequestType == USB_RECIP_DEVICE) {
+			if (feature_is_dev_remote_wakeup(crq))
+				udc->devstatus
+					&= ~(1 << USB_DEVICE_REMOTE_WAKEUP);
+			else
+				/* Can't CLEAR_FEATURE TEST_MODE */
+				goto stall;
+		} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
+			struct usba_ep *target;
+
+			if (crq->wLength != cpu_to_le16(0)
+					|| !feature_is_ep_halt(crq))
+				goto stall;
+			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
+			if (!target)
+				goto stall;
+
+			usba_ep_writel(target, CLR_STA, USBA_FORCE_STALL);
+			if (target->index != 0)
+				usba_ep_writel(target, CLR_STA,
+						USBA_TOGGLE_CLR);
+		} else {
+			goto delegate;
+		}
+
+		send_status(udc, ep);
+		break;
+	}
+
+	case USB_REQ_SET_FEATURE: {
+		if (crq->bRequestType == USB_RECIP_DEVICE) {
+			if (feature_is_dev_test_mode(crq)) {
+				send_status(udc, ep);
+				ep->state = STATUS_STAGE_TEST;
+				udc->test_mode = le16_to_cpu(crq->wIndex);
+				return 0;
+			} else if (feature_is_dev_remote_wakeup(crq)) {
+				udc->devstatus |= 1 << USB_DEVICE_REMOTE_WAKEUP;
+			} else {
+				goto stall;
+			}
+		} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
+			struct usba_ep *target;
+
+			if (crq->wLength != cpu_to_le16(0)
+					|| !feature_is_ep_halt(crq))
+				goto stall;
+
+			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
+			if (!target)
+				goto stall;
+
+			usba_ep_writel(target, SET_STA, USBA_FORCE_STALL);
+		} else
+			goto delegate;
+
+		send_status(udc, ep);
+		break;
+	}
+
+	case USB_REQ_SET_ADDRESS:
+		if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
+			goto delegate;
+
+		set_address(udc, le16_to_cpu(crq->wValue));
+		send_status(udc, ep);
+		ep->state = STATUS_STAGE_ADDR;
+		break;
+
+	default:
+delegate:
+		spin_unlock(&udc->lock);
+		retval = udc->driver->setup(&udc->gadget, crq);
+		spin_lock(&udc->lock);
+	}
+
+	return retval;
+
+stall:
+	pr_err("udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, "
+		"halting endpoint...\n",
+		ep->ep.name, crq->bRequestType, crq->bRequest,
+		le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
+		le16_to_cpu(crq->wLength));
+	set_protocol_stall(udc, ep);
+	return -1;
+}
+
+static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep)
+{
+	struct usba_request *req;
+	u32 epstatus;
+	u32 epctrl;
+
+restart:
+	epstatus = usba_ep_readl(ep, STA);
+	epctrl = usba_ep_readl(ep, CTL);
+
+	DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n",
+			ep->ep.name, ep->state, epstatus, epctrl);
+
+	req = NULL;
+	if (!list_empty(&ep->queue))
+		req = list_entry(ep->queue.next,
+				 struct usba_request, queue);
+
+	if ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
+		if (req->submitted)
+			next_fifo_transaction(ep, req);
+		else
+			submit_request(ep, req);
+
+		if (req->last_transaction) {
+			usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
+			usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
+		}
+		goto restart;
+	}
+	if ((epstatus & epctrl) & USBA_TX_COMPLETE) {
+		usba_ep_writel(ep, CLR_STA, USBA_TX_COMPLETE);
+
+		switch (ep->state) {
+		case DATA_STAGE_IN:
+			usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
+			usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+			ep->state = STATUS_STAGE_OUT;
+			break;
+		case STATUS_STAGE_ADDR:
+			/* Activate our new address */
+			usba_writel(udc, CTRL, (usba_readl(udc, CTRL)
+						| USBA_FADDR_EN));
+			usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+			ep->state = WAIT_FOR_SETUP;
+			break;
+		case STATUS_STAGE_IN:
+			if (req) {
+				list_del_init(&req->queue);
+				request_complete(ep, req, 0);
+				submit_next_request(ep);
+			}
+			usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+			ep->state = WAIT_FOR_SETUP;
+			break;
+		case STATUS_STAGE_TEST:
+			usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+			ep->state = WAIT_FOR_SETUP;
+			if (do_test_mode(udc))
+				set_protocol_stall(udc, ep);
+			break;
+		default:
+			pr_err("udc: %s: TXCOMP: Invalid endpoint state %d, "
+				"halting endpoint...\n",
+				ep->ep.name, ep->state);
+			set_protocol_stall(udc, ep);
+			break;
+		}
+
+		goto restart;
+	}
+	if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
+		switch (ep->state) {
+		case STATUS_STAGE_OUT:
+			usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
+			usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
+
+			if (req) {
+				list_del_init(&req->queue);
+				request_complete(ep, req, 0);
+			}
+			ep->state = WAIT_FOR_SETUP;
+			break;
+
+		case DATA_STAGE_OUT:
+			receive_data(ep);
+			break;
+
+		default:
+			usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
+			usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
+			pr_err("udc: %s: RXRDY: Invalid endpoint state %d, "
+				"halting endpoint...\n",
+				ep->ep.name, ep->state);
+			set_protocol_stall(udc, ep);
+			break;
+		}
+
+		goto restart;
+	}
+	if (epstatus & USBA_RX_SETUP) {
+		union {
+			struct usb_ctrlrequest crq;
+			unsigned long data[2];
+		} crq;
+		unsigned int pkt_len;
+		int ret;
+
+		if (ep->state != WAIT_FOR_SETUP) {
+			/*
+			 * Didn't expect a SETUP packet at this
+			 * point. Clean up any pending requests (which
+			 * may be successful).
+			 */
+			int status = -EPROTO;
+
+			/*
+			 * RXRDY and TXCOMP are dropped when SETUP
+			 * packets arrive.  Just pretend we received
+			 * the status packet.
+			 */
+			if (ep->state == STATUS_STAGE_OUT
+					|| ep->state == STATUS_STAGE_IN) {
+				usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
+				status = 0;
+			}
+
+			if (req) {
+				list_del_init(&req->queue);
+				request_complete(ep, req, status);
+			}
+		}
+
+		pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
+		DBG(DBG_HW, "Packet length: %u\n", pkt_len);
+		if (pkt_len != sizeof(crq)) {
+			pr_warn("udc: Invalid packet length %u (expected %zu)\n",
+				pkt_len, sizeof(crq));
+			set_protocol_stall(udc, ep);
+			return;
+		}
+
+		DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
+		memcpy_fromio(crq.data, ep->fifo, sizeof(crq));
+
+		/* Free up one bank in the FIFO so that we can
+		 * generate or receive a reply right away. */
+		usba_ep_writel(ep, CLR_STA, USBA_RX_SETUP);
+
+		/* printk(KERN_DEBUG "setup: %d: %02x.%02x\n",
+			ep->state, crq.crq.bRequestType,
+			crq.crq.bRequest); */
+
+		if (crq.crq.bRequestType & USB_DIR_IN) {
+			/*
+			 * The USB 2.0 spec states that "if wLength is
+			 * zero, there is no data transfer phase."
+			 * However, testusb #14 seems to actually
+			 * expect a data phase even if wLength = 0...
+			 */
+			ep->state = DATA_STAGE_IN;
+		} else {
+			if (crq.crq.wLength != cpu_to_le16(0))
+				ep->state = DATA_STAGE_OUT;
+			else
+				ep->state = STATUS_STAGE_IN;
+		}
+
+		ret = -1;
+		if (ep->index == 0)
+			ret = handle_ep0_setup(udc, ep, &crq.crq);
+		else {
+			spin_unlock(&udc->lock);
+			ret = udc->driver->setup(&udc->gadget, &crq.crq);
+			spin_lock(&udc->lock);
+		}
+
+		DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
+			crq.crq.bRequestType, crq.crq.bRequest,
+			le16_to_cpu(crq.crq.wLength), ep->state, ret);
+
+		if (ret < 0) {
+			/* Let the host know that we failed */
+			set_protocol_stall(udc, ep);
+		}
+	}
+}
+
+static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep)
+{
+	struct usba_request *req;
+	u32 epstatus;
+	u32 epctrl;
+
+	epstatus = usba_ep_readl(ep, STA);
+	epctrl = usba_ep_readl(ep, CTL);
+
+	DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n", ep->ep.name, epstatus);
+
+	while ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
+		DBG(DBG_BUS, "%s: TX PK ready\n", ep->ep.name);
+
+		if (list_empty(&ep->queue)) {
+			dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n");
+			usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
+			return;
+		}
+
+		req = list_entry(ep->queue.next, struct usba_request, queue);
+
+		if (req->using_dma) {
+			/* Send a zero-length packet */
+			usba_ep_writel(ep, SET_STA,
+					USBA_TX_PK_RDY);
+			usba_ep_writel(ep, CTL_DIS,
+					USBA_TX_PK_RDY);
+			list_del_init(&req->queue);
+			submit_next_request(ep);
+			request_complete(ep, req, 0);
+		} else {
+			if (req->submitted)
+				next_fifo_transaction(ep, req);
+			else
+				submit_request(ep, req);
+
+			if (req->last_transaction) {
+				list_del_init(&req->queue);
+				submit_next_request(ep);
+				request_complete(ep, req, 0);
+			}
+		}
+
+		epstatus = usba_ep_readl(ep, STA);
+		epctrl = usba_ep_readl(ep, CTL);
+	}
+	if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
+		DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name);
+		receive_data(ep);
+	}
+}
+
+static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep)
+{
+	struct usba_request *req;
+	u32 status, control, pending;
+
+	status = usba_dma_readl(ep, STATUS);
+	control = usba_dma_readl(ep, CONTROL);
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+	ep->last_dma_status = status;
+#endif
+	pending = status & control;
+	DBG(DBG_INT | DBG_DMA, "dma irq, s/%#08x, c/%#08x\n", status, control);
+
+	if (status & USBA_DMA_CH_EN) {
+		dev_err(&udc->pdev->dev,
+			"DMA_CH_EN is set after transfer is finished!\n");
+		dev_err(&udc->pdev->dev,
+			"status=%#08x, pending=%#08x, control=%#08x\n",
+			status, pending, control);
+
+		/*
+		 * try to pretend nothing happened. We might have to
+		 * do something here...
+		 */
+	}
+
+	if (list_empty(&ep->queue))
+		/* Might happen if a reset comes along at the right moment */
+		return;
+
+	if (pending & (USBA_DMA_END_TR_ST | USBA_DMA_END_BUF_ST)) {
+		req = list_entry(ep->queue.next, struct usba_request, queue);
+		usba_update_req(ep, req, status);
+
+		list_del_init(&req->queue);
+		submit_next_request(ep);
+		request_complete(ep, req, 0);
+	}
+}
+
+static int start_clock(struct usba_udc *udc);
+static void stop_clock(struct usba_udc *udc);
+
+static irqreturn_t usba_udc_irq(int irq, void *devid)
+{
+	struct usba_udc *udc = devid;
+	u32 status, int_enb;
+	u32 dma_status;
+	u32 ep_status;
+
+	spin_lock(&udc->lock);
+
+	int_enb = usba_int_enb_get(udc);
+	status = usba_readl(udc, INT_STA) & (int_enb | USBA_HIGH_SPEED);
+	DBG(DBG_INT, "irq, status=%#08x\n", status);
+
+	if (status & USBA_DET_SUSPEND) {
+		usba_writel(udc, INT_CLR, USBA_DET_SUSPEND|USBA_WAKE_UP);
+		usba_int_enb_set(udc, USBA_WAKE_UP);
+		usba_int_enb_clear(udc, USBA_DET_SUSPEND);
+		udc->suspended = true;
+		toggle_bias(udc, 0);
+		udc->bias_pulse_needed = true;
+		stop_clock(udc);
+		DBG(DBG_BUS, "Suspend detected\n");
+		if (udc->gadget.speed != USB_SPEED_UNKNOWN
+				&& udc->driver && udc->driver->suspend) {
+			spin_unlock(&udc->lock);
+			udc->driver->suspend(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+
+	if (status & USBA_WAKE_UP) {
+		start_clock(udc);
+		toggle_bias(udc, 1);
+		usba_writel(udc, INT_CLR, USBA_WAKE_UP);
+		DBG(DBG_BUS, "Wake Up CPU detected\n");
+	}
+
+	if (status & USBA_END_OF_RESUME) {
+		udc->suspended = false;
+		usba_writel(udc, INT_CLR, USBA_END_OF_RESUME);
+		usba_int_enb_clear(udc, USBA_WAKE_UP);
+		usba_int_enb_set(udc, USBA_DET_SUSPEND);
+		generate_bias_pulse(udc);
+		DBG(DBG_BUS, "Resume detected\n");
+		if (udc->gadget.speed != USB_SPEED_UNKNOWN
+				&& udc->driver && udc->driver->resume) {
+			spin_unlock(&udc->lock);
+			udc->driver->resume(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+
+	dma_status = USBA_BFEXT(DMA_INT, status);
+	if (dma_status) {
+		int i;
+
+		usba_int_enb_set(udc, USBA_DET_SUSPEND);
+
+		for (i = 1; i <= USBA_NR_DMAS; i++)
+			if (dma_status & (1 << i))
+				usba_dma_irq(udc, &udc->usba_ep[i]);
+	}
+
+	ep_status = USBA_BFEXT(EPT_INT, status);
+	if (ep_status) {
+		int i;
+
+		usba_int_enb_set(udc, USBA_DET_SUSPEND);
+
+		for (i = 0; i < udc->num_ep; i++)
+			if (ep_status & (1 << i)) {
+				if (ep_is_control(&udc->usba_ep[i]))
+					usba_control_irq(udc, &udc->usba_ep[i]);
+				else
+					usba_ep_irq(udc, &udc->usba_ep[i]);
+			}
+	}
+
+	if (status & USBA_END_OF_RESET) {
+		struct usba_ep *ep0, *ep;
+		int i;
+
+		usba_writel(udc, INT_CLR,
+			USBA_END_OF_RESET|USBA_END_OF_RESUME
+			|USBA_DET_SUSPEND|USBA_WAKE_UP);
+		generate_bias_pulse(udc);
+		reset_all_endpoints(udc);
+
+		if (udc->gadget.speed != USB_SPEED_UNKNOWN && udc->driver) {
+			udc->gadget.speed = USB_SPEED_UNKNOWN;
+			spin_unlock(&udc->lock);
+			usb_gadget_udc_reset(&udc->gadget, udc->driver);
+			spin_lock(&udc->lock);
+		}
+
+		if (status & USBA_HIGH_SPEED)
+			udc->gadget.speed = USB_SPEED_HIGH;
+		else
+			udc->gadget.speed = USB_SPEED_FULL;
+		DBG(DBG_BUS, "%s bus reset detected\n",
+		    usb_speed_string(udc->gadget.speed));
+
+		ep0 = &udc->usba_ep[0];
+		ep0->ep.desc = &usba_ep0_desc;
+		ep0->state = WAIT_FOR_SETUP;
+		usba_ep_writel(ep0, CFG,
+				(USBA_BF(EPT_SIZE, EP0_EPT_SIZE)
+				| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL)
+				| USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
+		usba_ep_writel(ep0, CTL_ENB,
+				USBA_EPT_ENABLE | USBA_RX_SETUP);
+
+		/* If we get reset while suspended... */
+		udc->suspended = false;
+		usba_int_enb_clear(udc, USBA_WAKE_UP);
+
+		usba_int_enb_set(udc, USBA_BF(EPT_INT, 1) |
+				      USBA_DET_SUSPEND | USBA_END_OF_RESUME);
+
+		/*
+		 * Unclear why we hit this irregularly, e.g. in usbtest,
+		 * but it's clearly harmless...
+		 */
+		if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED))
+			dev_err(&udc->pdev->dev,
+				"ODD: EP0 configuration is invalid!\n");
+
+		/* Preallocate other endpoints */
+		for (i = 1; i < udc->num_ep; i++) {
+			ep = &udc->usba_ep[i];
+			if (ep->ep.claimed) {
+				usba_ep_writel(ep, CFG, ep->ept_cfg);
+				if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED))
+					dev_err(&udc->pdev->dev,
+						"ODD: EP%d configuration is invalid!\n", i);
+			}
+		}
+	}
+
+	spin_unlock(&udc->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int start_clock(struct usba_udc *udc)
+{
+	int ret;
+
+	if (udc->clocked)
+		return 0;
+
+	pm_stay_awake(&udc->pdev->dev);
+
+	ret = clk_prepare_enable(udc->pclk);
+	if (ret)
+		return ret;
+	ret = clk_prepare_enable(udc->hclk);
+	if (ret) {
+		clk_disable_unprepare(udc->pclk);
+		return ret;
+	}
+
+	udc->clocked = true;
+	return 0;
+}
+
+static void stop_clock(struct usba_udc *udc)
+{
+	if (!udc->clocked)
+		return;
+
+	clk_disable_unprepare(udc->hclk);
+	clk_disable_unprepare(udc->pclk);
+
+	udc->clocked = false;
+
+	pm_relax(&udc->pdev->dev);
+}
+
+static int usba_start(struct usba_udc *udc)
+{
+	unsigned long flags;
+	int ret;
+
+	ret = start_clock(udc);
+	if (ret)
+		return ret;
+
+	if (udc->suspended)
+		return 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	toggle_bias(udc, 1);
+	usba_writel(udc, CTRL, USBA_ENABLE_MASK);
+	/* Clear all requested and pending interrupts... */
+	usba_writel(udc, INT_ENB, 0);
+	udc->int_enb_cache = 0;
+	usba_writel(udc, INT_CLR,
+		USBA_END_OF_RESET|USBA_END_OF_RESUME
+		|USBA_DET_SUSPEND|USBA_WAKE_UP);
+	/* ...and enable just 'reset' IRQ to get us started */
+	usba_int_enb_set(udc, USBA_END_OF_RESET);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static void usba_stop(struct usba_udc *udc)
+{
+	unsigned long flags;
+
+	if (udc->suspended)
+		return;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	reset_all_endpoints(udc);
+
+	/* This will also disable the DP pullup */
+	toggle_bias(udc, 0);
+	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	stop_clock(udc);
+}
+
+static irqreturn_t usba_vbus_irq_thread(int irq, void *devid)
+{
+	struct usba_udc *udc = devid;
+	int vbus;
+
+	/* debounce */
+	udelay(10);
+
+	mutex_lock(&udc->vbus_mutex);
+
+	vbus = vbus_is_present(udc);
+	if (vbus != udc->vbus_prev) {
+		if (vbus) {
+			usba_start(udc);
+		} else {
+			udc->suspended = false;
+			if (udc->driver->disconnect)
+				udc->driver->disconnect(&udc->gadget);
+
+			usba_stop(udc);
+		}
+		udc->vbus_prev = vbus;
+	}
+
+	mutex_unlock(&udc->vbus_mutex);
+	return IRQ_HANDLED;
+}
+
+static int atmel_usba_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget);
+	unsigned long flags;
+	u32 ctrl;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	ctrl = usba_readl(udc, CTRL);
+	if (is_on)
+		ctrl &= ~USBA_DETACH;
+	else
+		ctrl |= USBA_DETACH;
+	usba_writel(udc, CTRL, ctrl);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int atmel_usba_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	int ret;
+	struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->devstatus = 1 << USB_DEVICE_SELF_POWERED;
+	udc->driver = driver;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	mutex_lock(&udc->vbus_mutex);
+
+	if (udc->vbus_pin)
+		enable_irq(gpiod_to_irq(udc->vbus_pin));
+
+	/* If Vbus is present, enable the controller and wait for reset */
+	udc->vbus_prev = vbus_is_present(udc);
+	if (udc->vbus_prev) {
+		ret = usba_start(udc);
+		if (ret)
+			goto err;
+	}
+
+	mutex_unlock(&udc->vbus_mutex);
+	return 0;
+
+err:
+	if (udc->vbus_pin)
+		disable_irq(gpiod_to_irq(udc->vbus_pin));
+
+	mutex_unlock(&udc->vbus_mutex);
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
+	udc->driver = NULL;
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return ret;
+}
+
+static int atmel_usba_stop(struct usb_gadget *gadget)
+{
+	struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget);
+
+	if (udc->vbus_pin)
+		disable_irq(gpiod_to_irq(udc->vbus_pin));
+
+	udc->suspended = false;
+	usba_stop(udc);
+
+	udc->driver = NULL;
+
+	return 0;
+}
+
+static void at91sam9rl_toggle_bias(struct usba_udc *udc, int is_on)
+{
+	regmap_update_bits(udc->pmc, AT91_CKGR_UCKR, AT91_PMC_BIASEN,
+			   is_on ? AT91_PMC_BIASEN : 0);
+}
+
+static void at91sam9g45_pulse_bias(struct usba_udc *udc)
+{
+	regmap_update_bits(udc->pmc, AT91_CKGR_UCKR, AT91_PMC_BIASEN, 0);
+	regmap_update_bits(udc->pmc, AT91_CKGR_UCKR, AT91_PMC_BIASEN,
+			   AT91_PMC_BIASEN);
+}
+
+static const struct usba_udc_errata at91sam9rl_errata = {
+	.toggle_bias = at91sam9rl_toggle_bias,
+};
+
+static const struct usba_udc_errata at91sam9g45_errata = {
+	.pulse_bias = at91sam9g45_pulse_bias,
+};
+
+static const struct usba_ep_config ep_config_sam9[] = {
+	{ .nr_banks = 1 },				/* ep 0 */
+	{ .nr_banks = 2, .can_dma = 1, .can_isoc = 1 },	/* ep 1 */
+	{ .nr_banks = 2, .can_dma = 1, .can_isoc = 1 },	/* ep 2 */
+	{ .nr_banks = 3, .can_dma = 1 },		/* ep 3 */
+	{ .nr_banks = 3, .can_dma = 1 },		/* ep 4 */
+	{ .nr_banks = 3, .can_dma = 1, .can_isoc = 1 },	/* ep 5 */
+	{ .nr_banks = 3, .can_dma = 1, .can_isoc = 1 },	/* ep 6 */
+};
+
+static const struct usba_ep_config ep_config_sama5[] = {
+	{ .nr_banks = 1 },				/* ep 0 */
+	{ .nr_banks = 3, .can_dma = 1, .can_isoc = 1 },	/* ep 1 */
+	{ .nr_banks = 3, .can_dma = 1, .can_isoc = 1 },	/* ep 2 */
+	{ .nr_banks = 2, .can_dma = 1, .can_isoc = 1 },	/* ep 3 */
+	{ .nr_banks = 2, .can_dma = 1, .can_isoc = 1 },	/* ep 4 */
+	{ .nr_banks = 2, .can_dma = 1, .can_isoc = 1 },	/* ep 5 */
+	{ .nr_banks = 2, .can_dma = 1, .can_isoc = 1 },	/* ep 6 */
+	{ .nr_banks = 2, .can_dma = 1, .can_isoc = 1 },	/* ep 7 */
+	{ .nr_banks = 2, .can_isoc = 1 },		/* ep 8 */
+	{ .nr_banks = 2, .can_isoc = 1 },		/* ep 9 */
+	{ .nr_banks = 2, .can_isoc = 1 },		/* ep 10 */
+	{ .nr_banks = 2, .can_isoc = 1 },		/* ep 11 */
+	{ .nr_banks = 2, .can_isoc = 1 },		/* ep 12 */
+	{ .nr_banks = 2, .can_isoc = 1 },		/* ep 13 */
+	{ .nr_banks = 2, .can_isoc = 1 },		/* ep 14 */
+	{ .nr_banks = 2, .can_isoc = 1 },		/* ep 15 */
+};
+
+static const struct usba_udc_config udc_at91sam9rl_cfg = {
+	.errata = &at91sam9rl_errata,
+	.config = ep_config_sam9,
+	.num_ep = ARRAY_SIZE(ep_config_sam9),
+	.ep_prealloc = true,
+};
+
+static const struct usba_udc_config udc_at91sam9g45_cfg = {
+	.errata = &at91sam9g45_errata,
+	.config = ep_config_sam9,
+	.num_ep = ARRAY_SIZE(ep_config_sam9),
+	.ep_prealloc = true,
+};
+
+static const struct usba_udc_config udc_sama5d3_cfg = {
+	.config = ep_config_sama5,
+	.num_ep = ARRAY_SIZE(ep_config_sama5),
+	.ep_prealloc = true,
+};
+
+static const struct usba_udc_config udc_sam9x60_cfg = {
+	.num_ep = ARRAY_SIZE(ep_config_sam9),
+	.config = ep_config_sam9,
+	.ep_prealloc = false,
+};
+
+static const struct of_device_id atmel_udc_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9rl-udc", .data = &udc_at91sam9rl_cfg },
+	{ .compatible = "atmel,at91sam9g45-udc", .data = &udc_at91sam9g45_cfg },
+	{ .compatible = "atmel,sama5d3-udc", .data = &udc_sama5d3_cfg },
+	{ .compatible = "microchip,sam9x60-udc", .data = &udc_sam9x60_cfg },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_udc_dt_ids);
+
+static const struct of_device_id atmel_pmc_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9g45-pmc" },
+	{ .compatible = "atmel,at91sam9rl-pmc" },
+	{ .compatible = "atmel,at91sam9x5-pmc" },
+	{ /* sentinel */ }
+};
+
+static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
+						    struct usba_udc *udc)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *match;
+	struct device_node *pp;
+	int i, ret;
+	struct usba_ep *eps, *ep;
+	const struct usba_udc_config *udc_config;
+
+	match = of_match_node(atmel_udc_dt_ids, np);
+	if (!match)
+		return ERR_PTR(-EINVAL);
+
+	udc_config = match->data;
+	udc->ep_prealloc = udc_config->ep_prealloc;
+	udc->errata = udc_config->errata;
+	if (udc->errata) {
+		pp = of_find_matching_node_and_match(NULL, atmel_pmc_dt_ids,
+						     NULL);
+		if (!pp)
+			return ERR_PTR(-ENODEV);
+
+		udc->pmc = syscon_node_to_regmap(pp);
+		of_node_put(pp);
+		if (IS_ERR(udc->pmc))
+			return ERR_CAST(udc->pmc);
+	}
+
+	udc->num_ep = 0;
+
+	udc->vbus_pin = devm_gpiod_get_optional(&pdev->dev, "atmel,vbus",
+						GPIOD_IN);
+	if (IS_ERR(udc->vbus_pin))
+		return ERR_CAST(udc->vbus_pin);
+
+	if (fifo_mode == 0) {
+		udc->num_ep = udc_config->num_ep;
+	} else {
+		udc->num_ep = usba_config_fifo_table(udc);
+	}
+
+	eps = devm_kcalloc(&pdev->dev, udc->num_ep, sizeof(struct usba_ep),
+			   GFP_KERNEL);
+	if (!eps)
+		return ERR_PTR(-ENOMEM);
+
+	udc->gadget.ep0 = &eps[0].ep;
+
+	INIT_LIST_HEAD(&eps[0].ep.ep_list);
+
+	i = 0;
+	while (i < udc->num_ep) {
+		const struct usba_ep_config *ep_cfg = &udc_config->config[i];
+
+		ep = &eps[i];
+
+		ep->index = fifo_mode ? udc->fifo_cfg[i].hw_ep_num : i;
+
+		/* Only the first EP is 64 bytes */
+		if (ep->index == 0)
+			ep->fifo_size = 64;
+		else
+			ep->fifo_size = 1024;
+
+		if (fifo_mode) {
+			if (ep->fifo_size < udc->fifo_cfg[i].fifo_size)
+				dev_warn(&pdev->dev,
+					 "Using default max fifo-size value\n");
+			else
+				ep->fifo_size = udc->fifo_cfg[i].fifo_size;
+		}
+
+		ep->nr_banks = ep_cfg->nr_banks;
+		if (fifo_mode) {
+			if (ep->nr_banks < udc->fifo_cfg[i].nr_banks)
+				dev_warn(&pdev->dev,
+					 "Using default max nb-banks value\n");
+			else
+				ep->nr_banks = udc->fifo_cfg[i].nr_banks;
+		}
+
+		ep->can_dma = ep_cfg->can_dma;
+		ep->can_isoc = ep_cfg->can_isoc;
+
+		sprintf(ep->name, "ep%d", ep->index);
+		ep->ep.name = ep->name;
+
+		ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
+		ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
+		ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
+		ep->ep.ops = &usba_ep_ops;
+		usb_ep_set_maxpacket_limit(&ep->ep, ep->fifo_size);
+		ep->udc = udc;
+		INIT_LIST_HEAD(&ep->queue);
+
+		if (ep->index == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = ep->can_isoc;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
+
+		if (fifo_mode != 0) {
+			/*
+			 * Generate ept_cfg based on FIFO size and
+			 * banks number
+			 */
+			if (ep->fifo_size  <= 8)
+				ep->ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8);
+			else
+				/* LSB is bit 1, not 0 */
+				ep->ept_cfg =
+				  USBA_BF(EPT_SIZE, fls(ep->fifo_size - 1) - 3);
+
+			ep->ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks);
+		}
+
+		if (i)
+			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+
+		i++;
+	}
+
+	if (i == 0) {
+		dev_err(&pdev->dev, "of_probe: no endpoint specified\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	return eps;
+err:
+	return ERR_PTR(ret);
+}
+
+static int usba_udc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct clk *pclk, *hclk;
+	struct usba_udc *udc;
+	int irq, ret, i;
+
+	udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
+
+	udc->gadget = usba_gadget_template;
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
+	udc->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(udc->regs))
+		return PTR_ERR(udc->regs);
+	dev_info(&pdev->dev, "MMIO registers at %pR mapped at %p\n",
+		 res, udc->regs);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
+	udc->fifo = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(udc->fifo))
+		return PTR_ERR(udc->fifo);
+	dev_info(&pdev->dev, "FIFO at %pR mapped at %p\n", res, udc->fifo);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	pclk = devm_clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(pclk))
+		return PTR_ERR(pclk);
+	hclk = devm_clk_get(&pdev->dev, "hclk");
+	if (IS_ERR(hclk))
+		return PTR_ERR(hclk);
+
+	spin_lock_init(&udc->lock);
+	mutex_init(&udc->vbus_mutex);
+	udc->pdev = pdev;
+	udc->pclk = pclk;
+	udc->hclk = hclk;
+
+	platform_set_drvdata(pdev, udc);
+
+	/* Make sure we start from a clean slate */
+	ret = clk_prepare_enable(pclk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable pclk, aborting.\n");
+		return ret;
+	}
+
+	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
+	clk_disable_unprepare(pclk);
+
+	udc->usba_ep = atmel_udc_of_init(pdev, udc);
+
+	toggle_bias(udc, 0);
+
+	if (IS_ERR(udc->usba_ep))
+		return PTR_ERR(udc->usba_ep);
+
+	ret = devm_request_irq(&pdev->dev, irq, usba_udc_irq, 0,
+				"atmel_usba_udc", udc);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
+			irq, ret);
+		return ret;
+	}
+	udc->irq = irq;
+
+	if (udc->vbus_pin) {
+		irq_set_status_flags(gpiod_to_irq(udc->vbus_pin), IRQ_NOAUTOEN);
+		ret = devm_request_threaded_irq(&pdev->dev,
+				gpiod_to_irq(udc->vbus_pin), NULL,
+				usba_vbus_irq_thread, USBA_VBUS_IRQFLAGS,
+				"atmel_usba_udc", udc);
+		if (ret) {
+			udc->vbus_pin = NULL;
+			dev_warn(&udc->pdev->dev,
+				 "failed to request vbus irq; "
+				 "assuming always on\n");
+		}
+	}
+
+	ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
+	if (ret)
+		return ret;
+	device_init_wakeup(&pdev->dev, 1);
+
+	usba_init_debugfs(udc);
+	for (i = 1; i < udc->num_ep; i++)
+		usba_ep_init_debugfs(udc, &udc->usba_ep[i]);
+
+	return 0;
+}
+
+static int usba_udc_remove(struct platform_device *pdev)
+{
+	struct usba_udc *udc;
+	int i;
+
+	udc = platform_get_drvdata(pdev);
+
+	device_init_wakeup(&pdev->dev, 0);
+	usb_del_gadget_udc(&udc->gadget);
+
+	for (i = 1; i < udc->num_ep; i++)
+		usba_ep_cleanup_debugfs(&udc->usba_ep[i]);
+	usba_cleanup_debugfs(udc);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int usba_udc_suspend(struct device *dev)
+{
+	struct usba_udc *udc = dev_get_drvdata(dev);
+
+	/* Not started */
+	if (!udc->driver)
+		return 0;
+
+	mutex_lock(&udc->vbus_mutex);
+
+	if (!device_may_wakeup(dev)) {
+		udc->suspended = false;
+		usba_stop(udc);
+		goto out;
+	}
+
+	/*
+	 * Device may wake up. We stay clocked if we failed
+	 * to request vbus irq, assuming always on.
+	 */
+	if (udc->vbus_pin) {
+		/* FIXME: right to stop here...??? */
+		usba_stop(udc);
+		enable_irq_wake(gpiod_to_irq(udc->vbus_pin));
+	}
+
+	enable_irq_wake(udc->irq);
+
+out:
+	mutex_unlock(&udc->vbus_mutex);
+	return 0;
+}
+
+static int usba_udc_resume(struct device *dev)
+{
+	struct usba_udc *udc = dev_get_drvdata(dev);
+
+	/* Not started */
+	if (!udc->driver)
+		return 0;
+
+	if (device_may_wakeup(dev)) {
+		if (udc->vbus_pin)
+			disable_irq_wake(gpiod_to_irq(udc->vbus_pin));
+
+		disable_irq_wake(udc->irq);
+	}
+
+	/* If Vbus is present, enable the controller and wait for reset */
+	mutex_lock(&udc->vbus_mutex);
+	udc->vbus_prev = vbus_is_present(udc);
+	if (udc->vbus_prev)
+		usba_start(udc);
+	mutex_unlock(&udc->vbus_mutex);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(usba_udc_pm_ops, usba_udc_suspend, usba_udc_resume);
+
+static struct platform_driver udc_driver = {
+	.probe		= usba_udc_probe,
+	.remove		= usba_udc_remove,
+	.driver		= {
+		.name		= "atmel_usba_udc",
+		.pm		= &usba_udc_pm_ops,
+		.of_match_table	= atmel_udc_dt_ids,
+	},
+};
+module_platform_driver(udc_driver);
+
+MODULE_DESCRIPTION("Atmel USBA UDC driver");
+MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:atmel_usba_udc");
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h
new file mode 100644
index 000000000..620472f21
--- /dev/null
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.h
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the Atmel USBA high speed USB device controller
+ *
+ * Copyright (C) 2005-2007 Atmel Corporation
+ */
+#ifndef __LINUX_USB_GADGET_USBA_UDC_H__
+#define __LINUX_USB_GADGET_USBA_UDC_H__
+
+#include <linux/gpio/consumer.h>
+
+/* USB register offsets */
+#define USBA_CTRL				0x0000
+#define USBA_FNUM				0x0004
+#define USBA_INT_ENB				0x0010
+#define USBA_INT_STA				0x0014
+#define USBA_INT_CLR				0x0018
+#define USBA_EPT_RST				0x001c
+#define USBA_TST				0x00e0
+
+/* USB endpoint register offsets */
+#define USBA_EPT_CFG				0x0000
+#define USBA_EPT_CTL_ENB			0x0004
+#define USBA_EPT_CTL_DIS			0x0008
+#define USBA_EPT_CTL				0x000c
+#define USBA_EPT_SET_STA			0x0014
+#define USBA_EPT_CLR_STA			0x0018
+#define USBA_EPT_STA				0x001c
+
+/* USB DMA register offsets */
+#define USBA_DMA_NXT_DSC			0x0000
+#define USBA_DMA_ADDRESS			0x0004
+#define USBA_DMA_CONTROL			0x0008
+#define USBA_DMA_STATUS				0x000c
+
+/* Bitfields in CTRL */
+#define USBA_DEV_ADDR_OFFSET			0
+#define USBA_DEV_ADDR_SIZE			7
+#define USBA_FADDR_EN				(1 <<  7)
+#define USBA_EN_USBA				(1 <<  8)
+#define USBA_DETACH				(1 <<  9)
+#define USBA_REMOTE_WAKE_UP			(1 << 10)
+#define USBA_PULLD_DIS				(1 << 11)
+
+#define USBA_ENABLE_MASK			(USBA_EN_USBA | USBA_PULLD_DIS)
+#define USBA_DISABLE_MASK			USBA_DETACH
+
+/* Bitfields in FNUM */
+#define USBA_MICRO_FRAME_NUM_OFFSET		0
+#define USBA_MICRO_FRAME_NUM_SIZE		3
+#define USBA_FRAME_NUMBER_OFFSET		3
+#define USBA_FRAME_NUMBER_SIZE			11
+#define USBA_FRAME_NUM_ERROR			(1 << 31)
+
+/* Bitfields in INT_ENB/INT_STA/INT_CLR */
+#define USBA_HIGH_SPEED				(1 <<  0)
+#define USBA_DET_SUSPEND			(1 <<  1)
+#define USBA_MICRO_SOF				(1 <<  2)
+#define USBA_SOF				(1 <<  3)
+#define USBA_END_OF_RESET			(1 <<  4)
+#define USBA_WAKE_UP				(1 <<  5)
+#define USBA_END_OF_RESUME			(1 <<  6)
+#define USBA_UPSTREAM_RESUME			(1 <<  7)
+#define USBA_EPT_INT_OFFSET			8
+#define USBA_EPT_INT_SIZE			16
+#define USBA_DMA_INT_OFFSET			24
+#define USBA_DMA_INT_SIZE			8
+
+/* Bitfields in EPT_RST */
+#define USBA_RST_OFFSET				0
+#define USBA_RST_SIZE				16
+
+/* Bitfields in USBA_TST */
+#define USBA_SPEED_CFG_OFFSET			0
+#define USBA_SPEED_CFG_SIZE			2
+#define USBA_TST_J_MODE				(1 <<  2)
+#define USBA_TST_K_MODE				(1 <<  3)
+#define USBA_TST_PKT_MODE			(1 <<  4)
+#define USBA_OPMODE2				(1 <<  5)
+
+/* Bitfields in EPT_CFG */
+#define USBA_EPT_SIZE_OFFSET			0
+#define USBA_EPT_SIZE_SIZE			3
+#define USBA_EPT_DIR_IN				(1 <<  3)
+#define USBA_EPT_TYPE_OFFSET			4
+#define USBA_EPT_TYPE_SIZE			2
+#define USBA_BK_NUMBER_OFFSET			6
+#define USBA_BK_NUMBER_SIZE			2
+#define USBA_NB_TRANS_OFFSET			8
+#define USBA_NB_TRANS_SIZE			2
+#define USBA_EPT_MAPPED				(1 << 31)
+
+/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
+#define USBA_EPT_ENABLE				(1 <<  0)
+#define USBA_AUTO_VALID				(1 <<  1)
+#define USBA_INTDIS_DMA				(1 <<  3)
+#define USBA_NYET_DIS				(1 <<  4)
+#define USBA_DATAX_RX				(1 <<  6)
+#define USBA_MDATA_RX				(1 <<  7)
+/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
+#define USBA_BUSY_BANK_IE			(1 << 18)
+
+/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
+#define USBA_FORCE_STALL			(1 <<  5)
+#define USBA_TOGGLE_CLR				(1 <<  6)
+#define USBA_TOGGLE_SEQ_OFFSET			6
+#define USBA_TOGGLE_SEQ_SIZE			2
+#define USBA_ERR_OVFLW				(1 <<  8)
+#define USBA_RX_BK_RDY				(1 <<  9)
+#define USBA_KILL_BANK				(1 <<  9)
+#define USBA_TX_COMPLETE			(1 << 10)
+#define USBA_TX_PK_RDY				(1 << 11)
+#define USBA_ISO_ERR_TRANS			(1 << 11)
+#define USBA_RX_SETUP				(1 << 12)
+#define USBA_ISO_ERR_FLOW			(1 << 12)
+#define USBA_STALL_SENT				(1 << 13)
+#define USBA_ISO_ERR_CRC			(1 << 13)
+#define USBA_ISO_ERR_NBTRANS			(1 << 13)
+#define USBA_NAK_IN				(1 << 14)
+#define USBA_ISO_ERR_FLUSH			(1 << 14)
+#define USBA_NAK_OUT				(1 << 15)
+#define USBA_CURRENT_BANK_OFFSET		16
+#define USBA_CURRENT_BANK_SIZE			2
+#define USBA_BUSY_BANKS_OFFSET			18
+#define USBA_BUSY_BANKS_SIZE			2
+#define USBA_BYTE_COUNT_OFFSET			20
+#define USBA_BYTE_COUNT_SIZE			11
+#define USBA_SHORT_PACKET			(1 << 31)
+
+/* Bitfields in DMA_CONTROL */
+#define USBA_DMA_CH_EN				(1 <<  0)
+#define USBA_DMA_LINK				(1 <<  1)
+#define USBA_DMA_END_TR_EN			(1 <<  2)
+#define USBA_DMA_END_BUF_EN			(1 <<  3)
+#define USBA_DMA_END_TR_IE			(1 <<  4)
+#define USBA_DMA_END_BUF_IE			(1 <<  5)
+#define USBA_DMA_DESC_LOAD_IE			(1 <<  6)
+#define USBA_DMA_BURST_LOCK			(1 <<  7)
+#define USBA_DMA_BUF_LEN_OFFSET			16
+#define USBA_DMA_BUF_LEN_SIZE			16
+
+/* Bitfields in DMA_STATUS */
+#define USBA_DMA_CH_ACTIVE			(1 <<  1)
+#define USBA_DMA_END_TR_ST			(1 <<  4)
+#define USBA_DMA_END_BUF_ST			(1 <<  5)
+#define USBA_DMA_DESC_LOAD_ST			(1 <<  6)
+
+/* Constants for SPEED_CFG */
+#define USBA_SPEED_CFG_NORMAL			0
+#define USBA_SPEED_CFG_FORCE_HIGH		2
+#define USBA_SPEED_CFG_FORCE_FULL		3
+
+/* Constants for EPT_SIZE */
+#define USBA_EPT_SIZE_8				0
+#define USBA_EPT_SIZE_16			1
+#define USBA_EPT_SIZE_32			2
+#define USBA_EPT_SIZE_64			3
+#define USBA_EPT_SIZE_128			4
+#define USBA_EPT_SIZE_256			5
+#define USBA_EPT_SIZE_512			6
+#define USBA_EPT_SIZE_1024			7
+
+/* Constants for EPT_TYPE */
+#define USBA_EPT_TYPE_CONTROL			0
+#define USBA_EPT_TYPE_ISO			1
+#define USBA_EPT_TYPE_BULK			2
+#define USBA_EPT_TYPE_INT			3
+
+/* Constants for BK_NUMBER */
+#define USBA_BK_NUMBER_ZERO			0
+#define USBA_BK_NUMBER_ONE			1
+#define USBA_BK_NUMBER_DOUBLE			2
+#define USBA_BK_NUMBER_TRIPLE			3
+
+/* Bit manipulation macros */
+#define USBA_BF(name, value)					\
+	(((value) & ((1 << USBA_##name##_SIZE) - 1))		\
+	 << USBA_##name##_OFFSET)
+#define USBA_BFEXT(name, value)					\
+	(((value) >> USBA_##name##_OFFSET)			\
+	 & ((1 << USBA_##name##_SIZE) - 1))
+#define USBA_BFINS(name, value, old)				\
+	(((old) & ~(((1 << USBA_##name##_SIZE) - 1)		\
+		    << USBA_##name##_OFFSET))			\
+	 | USBA_BF(name, value))
+
+/* Register access macros */
+#define usba_readl(udc, reg)					\
+	readl_relaxed((udc)->regs + USBA_##reg)
+#define usba_writel(udc, reg, value)				\
+	writel_relaxed((value), (udc)->regs + USBA_##reg)
+#define usba_ep_readl(ep, reg)					\
+	readl_relaxed((ep)->ep_regs + USBA_EPT_##reg)
+#define usba_ep_writel(ep, reg, value)				\
+	writel_relaxed((value), (ep)->ep_regs + USBA_EPT_##reg)
+#define usba_dma_readl(ep, reg)					\
+	readl_relaxed((ep)->dma_regs + USBA_DMA_##reg)
+#define usba_dma_writel(ep, reg, value)				\
+	writel_relaxed((value), (ep)->dma_regs + USBA_DMA_##reg)
+
+/* Calculate base address for a given endpoint or DMA controller */
+#define USBA_EPT_BASE(x)	(0x100 + (x) * 0x20)
+#define USBA_DMA_BASE(x)	(0x300 + (x) * 0x10)
+#define USBA_FIFO_BASE(x)	((x) << 16)
+
+/* Synth parameters */
+#define USBA_NR_DMAS		7
+
+#define EP0_FIFO_SIZE		64
+#define EP0_EPT_SIZE		USBA_EPT_SIZE_64
+#define EP0_NR_BANKS		1
+
+#define FIFO_IOMEM_ID	0
+#define CTRL_IOMEM_ID	1
+
+#define DBG_ERR		0x0001	/* report all error returns */
+#define DBG_HW		0x0002	/* debug hardware initialization */
+#define DBG_GADGET	0x0004	/* calls to/from gadget driver */
+#define DBG_INT		0x0008	/* interrupts */
+#define DBG_BUS		0x0010	/* report changes in bus state */
+#define DBG_QUEUE	0x0020  /* debug request queue processing */
+#define DBG_FIFO	0x0040  /* debug FIFO contents */
+#define DBG_DMA		0x0080  /* debug DMA handling */
+#define DBG_REQ		0x0100	/* print out queued request length */
+#define DBG_ALL		0xffff
+#define DBG_NONE	0x0000
+
+#define DEBUG_LEVEL	(DBG_ERR)
+
+#define DBG(level, fmt, ...)					\
+	do {							\
+		if ((level) & DEBUG_LEVEL)			\
+			pr_debug("udc: " fmt, ## __VA_ARGS__);	\
+	} while (0)
+
+enum usba_ctrl_state {
+	WAIT_FOR_SETUP,
+	DATA_STAGE_IN,
+	DATA_STAGE_OUT,
+	STATUS_STAGE_IN,
+	STATUS_STAGE_OUT,
+	STATUS_STAGE_ADDR,
+	STATUS_STAGE_TEST,
+};
+/*
+  EP_STATE_IDLE,
+  EP_STATE_SETUP,
+  EP_STATE_IN_DATA,
+  EP_STATE_OUT_DATA,
+  EP_STATE_SET_ADDR_STATUS,
+  EP_STATE_RX_STATUS,
+  EP_STATE_TX_STATUS,
+  EP_STATE_HALT,
+*/
+
+struct usba_dma_desc {
+	dma_addr_t next;
+	dma_addr_t addr;
+	u32 ctrl;
+};
+
+struct usba_fifo_cfg {
+	u8			hw_ep_num;
+	u16			fifo_size;
+	u8			nr_banks;
+};
+
+struct usba_ep {
+	int					state;
+	void __iomem				*ep_regs;
+	void __iomem				*dma_regs;
+	void __iomem				*fifo;
+	char					name[8];
+	struct usb_ep				ep;
+	struct usba_udc				*udc;
+
+	struct list_head			queue;
+
+	u16					fifo_size;
+	u8					nr_banks;
+	u8					index;
+	unsigned int				can_dma:1;
+	unsigned int				can_isoc:1;
+	unsigned int				is_isoc:1;
+	unsigned int				is_in:1;
+	unsigned long				ept_cfg;
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+	u32					last_dma_status;
+	struct dentry				*debugfs_dir;
+#endif
+};
+
+struct usba_ep_config {
+	u8					nr_banks;
+	unsigned int				can_dma:1;
+	unsigned int				can_isoc:1;
+};
+
+struct usba_request {
+	struct usb_request			req;
+	struct list_head			queue;
+
+	u32					ctrl;
+
+	unsigned int				submitted:1;
+	unsigned int				last_transaction:1;
+	unsigned int				using_dma:1;
+	unsigned int				mapped:1;
+};
+
+struct usba_udc_errata {
+	void (*toggle_bias)(struct usba_udc *udc, int is_on);
+	void (*pulse_bias)(struct usba_udc *udc);
+};
+
+struct usba_udc_config {
+	const struct usba_udc_errata *errata;
+	const struct usba_ep_config *config;
+	const int num_ep;
+	const bool ep_prealloc;
+};
+
+struct usba_udc {
+	/* Protect hw registers from concurrent modifications */
+	spinlock_t lock;
+
+	/* Mutex to prevent concurrent start or stop */
+	struct mutex vbus_mutex;
+
+	void __iomem *regs;
+	void __iomem *fifo;
+
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *driver;
+	struct platform_device *pdev;
+	const struct usba_udc_errata *errata;
+	int irq;
+	struct gpio_desc *vbus_pin;
+	int num_ep;
+	struct usba_fifo_cfg *fifo_cfg;
+	struct clk *pclk;
+	struct clk *hclk;
+	struct usba_ep *usba_ep;
+	bool bias_pulse_needed;
+	bool clocked;
+	bool suspended;
+	bool ep_prealloc;
+
+	u16 devstatus;
+
+	u16 test_mode;
+	int vbus_prev;
+
+	u32 int_enb_cache;
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+	struct dentry *debugfs_root;
+#endif
+
+	struct regmap *pmc;
+};
+
+static inline struct usba_ep *to_usba_ep(struct usb_ep *ep)
+{
+	return container_of(ep, struct usba_ep, ep);
+}
+
+static inline struct usba_request *to_usba_req(struct usb_request *req)
+{
+	return container_of(req, struct usba_request, req);
+}
+
+static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget)
+{
+	return container_of(gadget, struct usba_udc, gadget);
+}
+
+#define ep_is_control(ep)	((ep)->index == 0)
+#define ep_is_idle(ep)		((ep)->state == EP_STATE_IDLE)
+
+#endif /* __LINUX_USB_GADGET_USBA_UDC_H */
diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c
new file mode 100644
index 000000000..8d5892891
--- /dev/null
+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
@@ -0,0 +1,2387 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * bcm63xx_udc.c -- BCM63xx UDC high/full speed USB device controller
+ *
+ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
+ * Copyright (C) 2012 Broadcom Corporation
+ */
+
+#include <linux/bitops.h>
+#include <linux/bug.h>
+#include <linux/clk.h>
+#include <linux/compiler.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/workqueue.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_iudma.h>
+#include <bcm63xx_dev_usb_usbd.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+#define DRV_MODULE_NAME		"bcm63xx_udc"
+
+static const char bcm63xx_ep0name[] = "ep0";
+
+static const struct {
+	const char *name;
+	const struct usb_ep_caps caps;
+} bcm63xx_ep_info[] = {
+#define EP_INFO(_name, _caps) \
+	{ \
+		.name = _name, \
+		.caps = _caps, \
+	}
+
+	EP_INFO(bcm63xx_ep0name,
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)),
+	EP_INFO("ep1in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep2out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep3in-int",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep4out-int",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_OUT)),
+
+#undef EP_INFO
+};
+
+static bool use_fullspeed;
+module_param(use_fullspeed, bool, S_IRUGO);
+MODULE_PARM_DESC(use_fullspeed, "true for fullspeed only");
+
+/*
+ * RX IRQ coalescing options:
+ *
+ * false (default) - one IRQ per DATAx packet.  Slow but reliable.  The
+ * driver is able to pass the "testusb" suite and recover from conditions like:
+ *
+ *   1) Device queues up a 2048-byte RX IUDMA transaction on an OUT bulk ep
+ *   2) Host sends 512 bytes of data
+ *   3) Host decides to reconfigure the device and sends SET_INTERFACE
+ *   4) Device shuts down the endpoint and cancels the RX transaction
+ *
+ * true - one IRQ per transfer, for transfers <= 2048B.  Generates
+ * considerably fewer IRQs, but error recovery is less robust.  Does not
+ * reliably pass "testusb".
+ *
+ * TX always uses coalescing, because we can cancel partially complete TX
+ * transfers by repeatedly flushing the FIFO.  The hardware doesn't allow
+ * this on RX.
+ */
+static bool irq_coalesce;
+module_param(irq_coalesce, bool, S_IRUGO);
+MODULE_PARM_DESC(irq_coalesce, "take one IRQ per RX transfer");
+
+#define BCM63XX_NUM_EP			5
+#define BCM63XX_NUM_IUDMA		6
+#define BCM63XX_NUM_FIFO_PAIRS		3
+
+#define IUDMA_RESET_TIMEOUT_US		10000
+
+#define IUDMA_EP0_RXCHAN		0
+#define IUDMA_EP0_TXCHAN		1
+
+#define IUDMA_MAX_FRAGMENT		2048
+#define BCM63XX_MAX_CTRL_PKT		64
+
+#define BCMEP_CTRL			0x00
+#define BCMEP_ISOC			0x01
+#define BCMEP_BULK			0x02
+#define BCMEP_INTR			0x03
+
+#define BCMEP_OUT			0x00
+#define BCMEP_IN			0x01
+
+#define BCM63XX_SPD_FULL		1
+#define BCM63XX_SPD_HIGH		0
+
+#define IUDMA_DMAC_OFFSET		0x200
+#define IUDMA_DMAS_OFFSET		0x400
+
+enum bcm63xx_ep0_state {
+	EP0_REQUEUE,
+	EP0_IDLE,
+	EP0_IN_DATA_PHASE_SETUP,
+	EP0_IN_DATA_PHASE_COMPLETE,
+	EP0_OUT_DATA_PHASE_SETUP,
+	EP0_OUT_DATA_PHASE_COMPLETE,
+	EP0_OUT_STATUS_PHASE,
+	EP0_IN_FAKE_STATUS_PHASE,
+	EP0_SHUTDOWN,
+};
+
+static const char __maybe_unused bcm63xx_ep0_state_names[][32] = {
+	"REQUEUE",
+	"IDLE",
+	"IN_DATA_PHASE_SETUP",
+	"IN_DATA_PHASE_COMPLETE",
+	"OUT_DATA_PHASE_SETUP",
+	"OUT_DATA_PHASE_COMPLETE",
+	"OUT_STATUS_PHASE",
+	"IN_FAKE_STATUS_PHASE",
+	"SHUTDOWN",
+};
+
+/**
+ * struct iudma_ch_cfg - Static configuration for an IUDMA channel.
+ * @ep_num: USB endpoint number.
+ * @n_bds: Number of buffer descriptors in the ring.
+ * @ep_type: Endpoint type (control, bulk, interrupt).
+ * @dir: Direction (in, out).
+ * @n_fifo_slots: Number of FIFO entries to allocate for this channel.
+ * @max_pkt_hs: Maximum packet size in high speed mode.
+ * @max_pkt_fs: Maximum packet size in full speed mode.
+ */
+struct iudma_ch_cfg {
+	int				ep_num;
+	int				n_bds;
+	int				ep_type;
+	int				dir;
+	int				n_fifo_slots;
+	int				max_pkt_hs;
+	int				max_pkt_fs;
+};
+
+static const struct iudma_ch_cfg iudma_defaults[] = {
+
+	/* This controller was designed to support a CDC/RNDIS application.
+	   It may be possible to reconfigure some of the endpoints, but
+	   the hardware limitations (FIFO sizing and number of DMA channels)
+	   may significantly impact flexibility and/or stability.  Change
+	   these values at your own risk.
+
+	      ep_num       ep_type           n_fifo_slots    max_pkt_fs
+	idx      |  n_bds     |         dir       |  max_pkt_hs  |
+	 |       |    |       |          |        |      |       |       */
+	[0] = { -1,   4, BCMEP_CTRL, BCMEP_OUT,  32,    64,     64 },
+	[1] = {  0,   4, BCMEP_CTRL, BCMEP_OUT,  32,    64,     64 },
+	[2] = {  2,  16, BCMEP_BULK, BCMEP_OUT, 128,   512,     64 },
+	[3] = {  1,  16, BCMEP_BULK, BCMEP_IN,  128,   512,     64 },
+	[4] = {  4,   4, BCMEP_INTR, BCMEP_OUT,  32,    64,     64 },
+	[5] = {  3,   4, BCMEP_INTR, BCMEP_IN,   32,    64,     64 },
+};
+
+struct bcm63xx_udc;
+
+/**
+ * struct iudma_ch - Represents the current state of a single IUDMA channel.
+ * @ch_idx: IUDMA channel index (0 to BCM63XX_NUM_IUDMA-1).
+ * @ep_num: USB endpoint number.  -1 for ep0 RX.
+ * @enabled: Whether bcm63xx_ep_enable() has been called.
+ * @max_pkt: "Chunk size" on the USB interface.  Based on interface speed.
+ * @is_tx: true for TX, false for RX.
+ * @bep: Pointer to the associated endpoint.  NULL for ep0 RX.
+ * @udc: Reference to the device controller.
+ * @read_bd: Next buffer descriptor to reap from the hardware.
+ * @write_bd: Next BD available for a new packet.
+ * @end_bd: Points to the final BD in the ring.
+ * @n_bds_used: Number of BD entries currently occupied.
+ * @bd_ring: Base pointer to the BD ring.
+ * @bd_ring_dma: Physical (DMA) address of bd_ring.
+ * @n_bds: Total number of BDs in the ring.
+ *
+ * ep0 has two IUDMA channels (IUDMA_EP0_RXCHAN and IUDMA_EP0_TXCHAN), as it is
+ * bidirectional.  The "struct usb_ep" associated with ep0 is for TX (IN)
+ * only.
+ *
+ * Each bulk/intr endpoint has a single IUDMA channel and a single
+ * struct usb_ep.
+ */
+struct iudma_ch {
+	unsigned int			ch_idx;
+	int				ep_num;
+	bool				enabled;
+	int				max_pkt;
+	bool				is_tx;
+	struct bcm63xx_ep		*bep;
+	struct bcm63xx_udc		*udc;
+
+	struct bcm_enet_desc		*read_bd;
+	struct bcm_enet_desc		*write_bd;
+	struct bcm_enet_desc		*end_bd;
+	int				n_bds_used;
+
+	struct bcm_enet_desc		*bd_ring;
+	dma_addr_t			bd_ring_dma;
+	unsigned int			n_bds;
+};
+
+/**
+ * struct bcm63xx_ep - Internal (driver) state of a single endpoint.
+ * @ep_num: USB endpoint number.
+ * @iudma: Pointer to IUDMA channel state.
+ * @ep: USB gadget layer representation of the EP.
+ * @udc: Reference to the device controller.
+ * @queue: Linked list of outstanding requests for this EP.
+ * @halted: 1 if the EP is stalled; 0 otherwise.
+ */
+struct bcm63xx_ep {
+	unsigned int			ep_num;
+	struct iudma_ch			*iudma;
+	struct usb_ep			ep;
+	struct bcm63xx_udc		*udc;
+	struct list_head		queue;
+	unsigned			halted:1;
+};
+
+/**
+ * struct bcm63xx_req - Internal (driver) state of a single request.
+ * @queue: Links back to the EP's request list.
+ * @req: USB gadget layer representation of the request.
+ * @offset: Current byte offset into the data buffer (next byte to queue).
+ * @bd_bytes: Number of data bytes in outstanding BD entries.
+ * @iudma: IUDMA channel used for the request.
+ */
+struct bcm63xx_req {
+	struct list_head		queue;		/* ep's requests */
+	struct usb_request		req;
+	unsigned int			offset;
+	unsigned int			bd_bytes;
+	struct iudma_ch			*iudma;
+};
+
+/**
+ * struct bcm63xx_udc - Driver/hardware private context.
+ * @lock: Spinlock to mediate access to this struct, and (most) HW regs.
+ * @dev: Generic Linux device structure.
+ * @pd: Platform data (board/port info).
+ * @usbd_clk: Clock descriptor for the USB device block.
+ * @usbh_clk: Clock descriptor for the USB host block.
+ * @gadget: USB device.
+ * @driver: Driver for USB device.
+ * @usbd_regs: Base address of the USBD/USB20D block.
+ * @iudma_regs: Base address of the USBD's associated IUDMA block.
+ * @bep: Array of endpoints, including ep0.
+ * @iudma: Array of all IUDMA channels used by this controller.
+ * @cfg: USB configuration number, from SET_CONFIGURATION wValue.
+ * @iface: USB interface number, from SET_INTERFACE wIndex.
+ * @alt_iface: USB alt interface number, from SET_INTERFACE wValue.
+ * @ep0_ctrl_req: Request object for bcm63xx_udc-initiated ep0 transactions.
+ * @ep0_ctrl_buf: Data buffer for ep0_ctrl_req.
+ * @ep0state: Current state of the ep0 state machine.
+ * @ep0_wq: Workqueue struct used to wake up the ep0 state machine.
+ * @wedgemap: Bitmap of wedged endpoints.
+ * @ep0_req_reset: USB reset is pending.
+ * @ep0_req_set_cfg: Need to spoof a SET_CONFIGURATION packet.
+ * @ep0_req_set_iface: Need to spoof a SET_INTERFACE packet.
+ * @ep0_req_shutdown: Driver is shutting down; requesting ep0 to halt activity.
+ * @ep0_req_completed: ep0 request has completed; worker has not seen it yet.
+ * @ep0_reply: Pending reply from gadget driver.
+ * @ep0_request: Outstanding ep0 request.
+ */
+struct bcm63xx_udc {
+	spinlock_t			lock;
+
+	struct device			*dev;
+	struct bcm63xx_usbd_platform_data *pd;
+	struct clk			*usbd_clk;
+	struct clk			*usbh_clk;
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+
+	void __iomem			*usbd_regs;
+	void __iomem			*iudma_regs;
+
+	struct bcm63xx_ep		bep[BCM63XX_NUM_EP];
+	struct iudma_ch			iudma[BCM63XX_NUM_IUDMA];
+
+	int				cfg;
+	int				iface;
+	int				alt_iface;
+
+	struct bcm63xx_req		ep0_ctrl_req;
+	u8				*ep0_ctrl_buf;
+
+	int				ep0state;
+	struct work_struct		ep0_wq;
+
+	unsigned long			wedgemap;
+
+	unsigned			ep0_req_reset:1;
+	unsigned			ep0_req_set_cfg:1;
+	unsigned			ep0_req_set_iface:1;
+	unsigned			ep0_req_shutdown:1;
+
+	unsigned			ep0_req_completed:1;
+	struct usb_request		*ep0_reply;
+	struct usb_request		*ep0_request;
+};
+
+static const struct usb_ep_ops bcm63xx_udc_ep_ops;
+
+/***********************************************************************
+ * Convenience functions
+ ***********************************************************************/
+
+static inline struct bcm63xx_udc *gadget_to_udc(struct usb_gadget *g)
+{
+	return container_of(g, struct bcm63xx_udc, gadget);
+}
+
+static inline struct bcm63xx_ep *our_ep(struct usb_ep *ep)
+{
+	return container_of(ep, struct bcm63xx_ep, ep);
+}
+
+static inline struct bcm63xx_req *our_req(struct usb_request *req)
+{
+	return container_of(req, struct bcm63xx_req, req);
+}
+
+static inline u32 usbd_readl(struct bcm63xx_udc *udc, u32 off)
+{
+	return bcm_readl(udc->usbd_regs + off);
+}
+
+static inline void usbd_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+{
+	bcm_writel(val, udc->usbd_regs + off);
+}
+
+static inline u32 usb_dma_readl(struct bcm63xx_udc *udc, u32 off)
+{
+	return bcm_readl(udc->iudma_regs + off);
+}
+
+static inline void usb_dma_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+{
+	bcm_writel(val, udc->iudma_regs + off);
+}
+
+static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan)
+{
+	return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
+			(ENETDMA_CHAN_WIDTH * chan));
+}
+
+static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
+					int chan)
+{
+	bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
+			(ENETDMA_CHAN_WIDTH * chan));
+}
+
+static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan)
+{
+	return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
+			(ENETDMA_CHAN_WIDTH * chan));
+}
+
+static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
+					int chan)
+{
+	bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
+			(ENETDMA_CHAN_WIDTH * chan));
+}
+
+static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled)
+{
+	if (is_enabled) {
+		clk_enable(udc->usbh_clk);
+		clk_enable(udc->usbd_clk);
+		udelay(10);
+	} else {
+		clk_disable(udc->usbd_clk);
+		clk_disable(udc->usbh_clk);
+	}
+}
+
+/***********************************************************************
+ * Low-level IUDMA / FIFO operations
+ ***********************************************************************/
+
+/**
+ * bcm63xx_ep_dma_select - Helper function to set up the init_sel signal.
+ * @udc: Reference to the device controller.
+ * @idx: Desired init_sel value.
+ *
+ * The "init_sel" signal is used as a selection index for both endpoints
+ * and IUDMA channels.  Since these do not map 1:1, the use of this signal
+ * depends on the context.
+ */
+static void bcm63xx_ep_dma_select(struct bcm63xx_udc *udc, int idx)
+{
+	u32 val = usbd_readl(udc, USBD_CONTROL_REG);
+
+	val &= ~USBD_CONTROL_INIT_SEL_MASK;
+	val |= idx << USBD_CONTROL_INIT_SEL_SHIFT;
+	usbd_writel(udc, val, USBD_CONTROL_REG);
+}
+
+/**
+ * bcm63xx_set_stall - Enable/disable stall on one endpoint.
+ * @udc: Reference to the device controller.
+ * @bep: Endpoint on which to operate.
+ * @is_stalled: true to enable stall, false to disable.
+ *
+ * See notes in bcm63xx_update_wedge() regarding automatic clearing of
+ * halt/stall conditions.
+ */
+static void bcm63xx_set_stall(struct bcm63xx_udc *udc, struct bcm63xx_ep *bep,
+	bool is_stalled)
+{
+	u32 val;
+
+	val = USBD_STALL_UPDATE_MASK |
+		(is_stalled ? USBD_STALL_ENABLE_MASK : 0) |
+		(bep->ep_num << USBD_STALL_EPNUM_SHIFT);
+	usbd_writel(udc, val, USBD_STALL_REG);
+}
+
+/**
+ * bcm63xx_fifo_setup - (Re)initialize FIFO boundaries and settings.
+ * @udc: Reference to the device controller.
+ *
+ * These parameters depend on the USB link speed.  Settings are
+ * per-IUDMA-channel-pair.
+ */
+static void bcm63xx_fifo_setup(struct bcm63xx_udc *udc)
+{
+	int is_hs = udc->gadget.speed == USB_SPEED_HIGH;
+	u32 i, val, rx_fifo_slot, tx_fifo_slot;
+
+	/* set up FIFO boundaries and packet sizes; this is done in pairs */
+	rx_fifo_slot = tx_fifo_slot = 0;
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i += 2) {
+		const struct iudma_ch_cfg *rx_cfg = &iudma_defaults[i];
+		const struct iudma_ch_cfg *tx_cfg = &iudma_defaults[i + 1];
+
+		bcm63xx_ep_dma_select(udc, i >> 1);
+
+		val = (rx_fifo_slot << USBD_RXFIFO_CONFIG_START_SHIFT) |
+			((rx_fifo_slot + rx_cfg->n_fifo_slots - 1) <<
+			 USBD_RXFIFO_CONFIG_END_SHIFT);
+		rx_fifo_slot += rx_cfg->n_fifo_slots;
+		usbd_writel(udc, val, USBD_RXFIFO_CONFIG_REG);
+		usbd_writel(udc,
+			    is_hs ? rx_cfg->max_pkt_hs : rx_cfg->max_pkt_fs,
+			    USBD_RXFIFO_EPSIZE_REG);
+
+		val = (tx_fifo_slot << USBD_TXFIFO_CONFIG_START_SHIFT) |
+			((tx_fifo_slot + tx_cfg->n_fifo_slots - 1) <<
+			 USBD_TXFIFO_CONFIG_END_SHIFT);
+		tx_fifo_slot += tx_cfg->n_fifo_slots;
+		usbd_writel(udc, val, USBD_TXFIFO_CONFIG_REG);
+		usbd_writel(udc,
+			    is_hs ? tx_cfg->max_pkt_hs : tx_cfg->max_pkt_fs,
+			    USBD_TXFIFO_EPSIZE_REG);
+
+		usbd_readl(udc, USBD_TXFIFO_EPSIZE_REG);
+	}
+}
+
+/**
+ * bcm63xx_fifo_reset_ep - Flush a single endpoint's FIFO.
+ * @udc: Reference to the device controller.
+ * @ep_num: Endpoint number.
+ */
+static void bcm63xx_fifo_reset_ep(struct bcm63xx_udc *udc, int ep_num)
+{
+	u32 val;
+
+	bcm63xx_ep_dma_select(udc, ep_num);
+
+	val = usbd_readl(udc, USBD_CONTROL_REG);
+	val |= USBD_CONTROL_FIFO_RESET_MASK;
+	usbd_writel(udc, val, USBD_CONTROL_REG);
+	usbd_readl(udc, USBD_CONTROL_REG);
+}
+
+/**
+ * bcm63xx_fifo_reset - Flush all hardware FIFOs.
+ * @udc: Reference to the device controller.
+ */
+static void bcm63xx_fifo_reset(struct bcm63xx_udc *udc)
+{
+	int i;
+
+	for (i = 0; i < BCM63XX_NUM_FIFO_PAIRS; i++)
+		bcm63xx_fifo_reset_ep(udc, i);
+}
+
+/**
+ * bcm63xx_ep_init - Initial (one-time) endpoint initialization.
+ * @udc: Reference to the device controller.
+ */
+static void bcm63xx_ep_init(struct bcm63xx_udc *udc)
+{
+	u32 i, val;
+
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
+		const struct iudma_ch_cfg *cfg = &iudma_defaults[i];
+
+		if (cfg->ep_num < 0)
+			continue;
+
+		bcm63xx_ep_dma_select(udc, cfg->ep_num);
+		val = (cfg->ep_type << USBD_EPNUM_TYPEMAP_TYPE_SHIFT) |
+			((i >> 1) << USBD_EPNUM_TYPEMAP_DMA_CH_SHIFT);
+		usbd_writel(udc, val, USBD_EPNUM_TYPEMAP_REG);
+	}
+}
+
+/**
+ * bcm63xx_ep_setup - Configure per-endpoint settings.
+ * @udc: Reference to the device controller.
+ *
+ * This needs to be rerun if the speed/cfg/intf/altintf changes.
+ */
+static void bcm63xx_ep_setup(struct bcm63xx_udc *udc)
+{
+	u32 val, i;
+
+	usbd_writel(udc, USBD_CSR_SETUPADDR_DEF, USBD_CSR_SETUPADDR_REG);
+
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
+		const struct iudma_ch_cfg *cfg = &iudma_defaults[i];
+		int max_pkt = udc->gadget.speed == USB_SPEED_HIGH ?
+			      cfg->max_pkt_hs : cfg->max_pkt_fs;
+		int idx = cfg->ep_num;
+
+		udc->iudma[i].max_pkt = max_pkt;
+
+		if (idx < 0)
+			continue;
+		usb_ep_set_maxpacket_limit(&udc->bep[idx].ep, max_pkt);
+
+		val = (idx << USBD_CSR_EP_LOG_SHIFT) |
+		      (cfg->dir << USBD_CSR_EP_DIR_SHIFT) |
+		      (cfg->ep_type << USBD_CSR_EP_TYPE_SHIFT) |
+		      (udc->cfg << USBD_CSR_EP_CFG_SHIFT) |
+		      (udc->iface << USBD_CSR_EP_IFACE_SHIFT) |
+		      (udc->alt_iface << USBD_CSR_EP_ALTIFACE_SHIFT) |
+		      (max_pkt << USBD_CSR_EP_MAXPKT_SHIFT);
+		usbd_writel(udc, val, USBD_CSR_EP_REG(idx));
+	}
+}
+
+/**
+ * iudma_write - Queue a single IUDMA transaction.
+ * @udc: Reference to the device controller.
+ * @iudma: IUDMA channel to use.
+ * @breq: Request containing the transaction data.
+ *
+ * For RX IUDMA, this will queue a single buffer descriptor, as RX IUDMA
+ * does not honor SOP/EOP so the handling of multiple buffers is ambiguous.
+ * So iudma_write() may be called several times to fulfill a single
+ * usb_request.
+ *
+ * For TX IUDMA, this can queue multiple buffer descriptors if needed.
+ */
+static void iudma_write(struct bcm63xx_udc *udc, struct iudma_ch *iudma,
+	struct bcm63xx_req *breq)
+{
+	int first_bd = 1, last_bd = 0, extra_zero_pkt = 0;
+	unsigned int bytes_left = breq->req.length - breq->offset;
+	const int max_bd_bytes = !irq_coalesce && !iudma->is_tx ?
+		iudma->max_pkt : IUDMA_MAX_FRAGMENT;
+
+	iudma->n_bds_used = 0;
+	breq->bd_bytes = 0;
+	breq->iudma = iudma;
+
+	if ((bytes_left % iudma->max_pkt == 0) && bytes_left && breq->req.zero)
+		extra_zero_pkt = 1;
+
+	do {
+		struct bcm_enet_desc *d = iudma->write_bd;
+		u32 dmaflags = 0;
+		unsigned int n_bytes;
+
+		if (d == iudma->end_bd) {
+			dmaflags |= DMADESC_WRAP_MASK;
+			iudma->write_bd = iudma->bd_ring;
+		} else {
+			iudma->write_bd++;
+		}
+		iudma->n_bds_used++;
+
+		n_bytes = min_t(int, bytes_left, max_bd_bytes);
+		if (n_bytes)
+			dmaflags |= n_bytes << DMADESC_LENGTH_SHIFT;
+		else
+			dmaflags |= (1 << DMADESC_LENGTH_SHIFT) |
+				    DMADESC_USB_ZERO_MASK;
+
+		dmaflags |= DMADESC_OWNER_MASK;
+		if (first_bd) {
+			dmaflags |= DMADESC_SOP_MASK;
+			first_bd = 0;
+		}
+
+		/*
+		 * extra_zero_pkt forces one more iteration through the loop
+		 * after all data is queued up, to send the zero packet
+		 */
+		if (extra_zero_pkt && !bytes_left)
+			extra_zero_pkt = 0;
+
+		if (!iudma->is_tx || iudma->n_bds_used == iudma->n_bds ||
+		    (n_bytes == bytes_left && !extra_zero_pkt)) {
+			last_bd = 1;
+			dmaflags |= DMADESC_EOP_MASK;
+		}
+
+		d->address = breq->req.dma + breq->offset;
+		mb();
+		d->len_stat = dmaflags;
+
+		breq->offset += n_bytes;
+		breq->bd_bytes += n_bytes;
+		bytes_left -= n_bytes;
+	} while (!last_bd);
+
+	usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK,
+			ENETDMAC_CHANCFG_REG, iudma->ch_idx);
+}
+
+/**
+ * iudma_read - Check for IUDMA buffer completion.
+ * @udc: Reference to the device controller.
+ * @iudma: IUDMA channel to use.
+ *
+ * This checks to see if ALL of the outstanding BDs on the DMA channel
+ * have been filled.  If so, it returns the actual transfer length;
+ * otherwise it returns -EBUSY.
+ */
+static int iudma_read(struct bcm63xx_udc *udc, struct iudma_ch *iudma)
+{
+	int i, actual_len = 0;
+	struct bcm_enet_desc *d = iudma->read_bd;
+
+	if (!iudma->n_bds_used)
+		return -EINVAL;
+
+	for (i = 0; i < iudma->n_bds_used; i++) {
+		u32 dmaflags;
+
+		dmaflags = d->len_stat;
+
+		if (dmaflags & DMADESC_OWNER_MASK)
+			return -EBUSY;
+
+		actual_len += (dmaflags & DMADESC_LENGTH_MASK) >>
+			      DMADESC_LENGTH_SHIFT;
+		if (d == iudma->end_bd)
+			d = iudma->bd_ring;
+		else
+			d++;
+	}
+
+	iudma->read_bd = d;
+	iudma->n_bds_used = 0;
+	return actual_len;
+}
+
+/**
+ * iudma_reset_channel - Stop DMA on a single channel.
+ * @udc: Reference to the device controller.
+ * @iudma: IUDMA channel to reset.
+ */
+static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma)
+{
+	int timeout = IUDMA_RESET_TIMEOUT_US;
+	struct bcm_enet_desc *d;
+	int ch_idx = iudma->ch_idx;
+
+	if (!iudma->is_tx)
+		bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num));
+
+	/* stop DMA, then wait for the hardware to wrap up */
+	usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx);
+
+	while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) &
+				   ENETDMAC_CHANCFG_EN_MASK) {
+		udelay(1);
+
+		/* repeatedly flush the FIFO data until the BD completes */
+		if (iudma->is_tx && iudma->ep_num >= 0)
+			bcm63xx_fifo_reset_ep(udc, iudma->ep_num);
+
+		if (!timeout--) {
+			dev_err(udc->dev, "can't reset IUDMA channel %d\n",
+				ch_idx);
+			break;
+		}
+		if (timeout == IUDMA_RESET_TIMEOUT_US / 2) {
+			dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n",
+				 ch_idx);
+			usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK,
+					ENETDMAC_CHANCFG_REG, ch_idx);
+		}
+	}
+	usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx);
+
+	/* don't leave "live" HW-owned entries for the next guy to step on */
+	for (d = iudma->bd_ring; d <= iudma->end_bd; d++)
+		d->len_stat = 0;
+	mb();
+
+	iudma->read_bd = iudma->write_bd = iudma->bd_ring;
+	iudma->n_bds_used = 0;
+
+	/* set up IRQs, UBUS burst size, and BD base for this channel */
+	usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
+			ENETDMAC_IRMASK_REG, ch_idx);
+	usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx);
+
+	usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx);
+	usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx);
+}
+
+/**
+ * iudma_init_channel - One-time IUDMA channel initialization.
+ * @udc: Reference to the device controller.
+ * @ch_idx: Channel to initialize.
+ */
+static int iudma_init_channel(struct bcm63xx_udc *udc, unsigned int ch_idx)
+{
+	struct iudma_ch *iudma = &udc->iudma[ch_idx];
+	const struct iudma_ch_cfg *cfg = &iudma_defaults[ch_idx];
+	unsigned int n_bds = cfg->n_bds;
+	struct bcm63xx_ep *bep = NULL;
+
+	iudma->ep_num = cfg->ep_num;
+	iudma->ch_idx = ch_idx;
+	iudma->is_tx = !!(ch_idx & 0x01);
+	if (iudma->ep_num >= 0) {
+		bep = &udc->bep[iudma->ep_num];
+		bep->iudma = iudma;
+		INIT_LIST_HEAD(&bep->queue);
+	}
+
+	iudma->bep = bep;
+	iudma->udc = udc;
+
+	/* ep0 is always active; others are controlled by the gadget driver */
+	if (iudma->ep_num <= 0)
+		iudma->enabled = true;
+
+	iudma->n_bds = n_bds;
+	iudma->bd_ring = dmam_alloc_coherent(udc->dev,
+		n_bds * sizeof(struct bcm_enet_desc),
+		&iudma->bd_ring_dma, GFP_KERNEL);
+	if (!iudma->bd_ring)
+		return -ENOMEM;
+	iudma->end_bd = &iudma->bd_ring[n_bds - 1];
+
+	return 0;
+}
+
+/**
+ * iudma_init - One-time initialization of all IUDMA channels.
+ * @udc: Reference to the device controller.
+ *
+ * Enable DMA, flush channels, and enable global IUDMA IRQs.
+ */
+static int iudma_init(struct bcm63xx_udc *udc)
+{
+	int i, rc;
+
+	usb_dma_writel(udc, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
+
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
+		rc = iudma_init_channel(udc, i);
+		if (rc)
+			return rc;
+		iudma_reset_channel(udc, &udc->iudma[i]);
+	}
+
+	usb_dma_writel(udc, BIT(BCM63XX_NUM_IUDMA)-1, ENETDMA_GLB_IRQMASK_REG);
+	return 0;
+}
+
+/**
+ * iudma_uninit - Uninitialize IUDMA channels.
+ * @udc: Reference to the device controller.
+ *
+ * Kill global IUDMA IRQs, flush channels, and kill DMA.
+ */
+static void iudma_uninit(struct bcm63xx_udc *udc)
+{
+	int i;
+
+	usb_dma_writel(udc, 0, ENETDMA_GLB_IRQMASK_REG);
+
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i++)
+		iudma_reset_channel(udc, &udc->iudma[i]);
+
+	usb_dma_writel(udc, 0, ENETDMA_CFG_REG);
+}
+
+/***********************************************************************
+ * Other low-level USBD operations
+ ***********************************************************************/
+
+/**
+ * bcm63xx_set_ctrl_irqs - Mask/unmask control path interrupts.
+ * @udc: Reference to the device controller.
+ * @enable_irqs: true to enable, false to disable.
+ */
+static void bcm63xx_set_ctrl_irqs(struct bcm63xx_udc *udc, bool enable_irqs)
+{
+	u32 val;
+
+	usbd_writel(udc, 0, USBD_STATUS_REG);
+
+	val = BIT(USBD_EVENT_IRQ_USB_RESET) |
+	      BIT(USBD_EVENT_IRQ_SETUP) |
+	      BIT(USBD_EVENT_IRQ_SETCFG) |
+	      BIT(USBD_EVENT_IRQ_SETINTF) |
+	      BIT(USBD_EVENT_IRQ_USB_LINK);
+	usbd_writel(udc, enable_irqs ? val : 0, USBD_EVENT_IRQ_MASK_REG);
+	usbd_writel(udc, val, USBD_EVENT_IRQ_STATUS_REG);
+}
+
+/**
+ * bcm63xx_select_phy_mode - Select between USB device and host mode.
+ * @udc: Reference to the device controller.
+ * @is_device: true for device, false for host.
+ *
+ * This should probably be reworked to use the drivers/usb/otg
+ * infrastructure.
+ *
+ * By default, the AFE/pullups are disabled in device mode, until
+ * bcm63xx_select_pullup() is called.
+ */
+static void bcm63xx_select_phy_mode(struct bcm63xx_udc *udc, bool is_device)
+{
+	u32 val, portmask = BIT(udc->pd->port_no);
+
+	if (BCMCPU_IS_6328()) {
+		/* configure pinmux to sense VBUS signal */
+		val = bcm_gpio_readl(GPIO_PINMUX_OTHR_REG);
+		val &= ~GPIO_PINMUX_OTHR_6328_USB_MASK;
+		val |= is_device ? GPIO_PINMUX_OTHR_6328_USB_DEV :
+			       GPIO_PINMUX_OTHR_6328_USB_HOST;
+		bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
+	}
+
+	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+	if (is_device) {
+		val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
+		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+	} else {
+		val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
+		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+	}
+	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
+
+	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
+	if (is_device)
+		val |= USBH_PRIV_SWAP_USBD_MASK;
+	else
+		val &= ~USBH_PRIV_SWAP_USBD_MASK;
+	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
+}
+
+/**
+ * bcm63xx_select_pullup - Enable/disable the pullup on D+
+ * @udc: Reference to the device controller.
+ * @is_on: true to enable the pullup, false to disable.
+ *
+ * If the pullup is active, the host will sense a FS/HS device connected to
+ * the port.  If the pullup is inactive, the host will think the USB
+ * device has been disconnected.
+ */
+static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
+{
+	u32 val, portmask = BIT(udc->pd->port_no);
+
+	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+	if (is_on)
+		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+	else
+		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
+}
+
+/**
+ * bcm63xx_uninit_udc_hw - Shut down the hardware prior to driver removal.
+ * @udc: Reference to the device controller.
+ *
+ * This just masks the IUDMA IRQs and releases the clocks.  It is assumed
+ * that bcm63xx_udc_stop() has already run, and the clocks are stopped.
+ */
+static void bcm63xx_uninit_udc_hw(struct bcm63xx_udc *udc)
+{
+	set_clocks(udc, true);
+	iudma_uninit(udc);
+	set_clocks(udc, false);
+
+	clk_put(udc->usbd_clk);
+	clk_put(udc->usbh_clk);
+}
+
+/**
+ * bcm63xx_init_udc_hw - Initialize the controller hardware and data structures.
+ * @udc: Reference to the device controller.
+ */
+static int bcm63xx_init_udc_hw(struct bcm63xx_udc *udc)
+{
+	int i, rc = 0;
+	u32 val;
+
+	udc->ep0_ctrl_buf = devm_kzalloc(udc->dev, BCM63XX_MAX_CTRL_PKT,
+					 GFP_KERNEL);
+	if (!udc->ep0_ctrl_buf)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+	for (i = 0; i < BCM63XX_NUM_EP; i++) {
+		struct bcm63xx_ep *bep = &udc->bep[i];
+
+		bep->ep.name = bcm63xx_ep_info[i].name;
+		bep->ep.caps = bcm63xx_ep_info[i].caps;
+		bep->ep_num = i;
+		bep->ep.ops = &bcm63xx_udc_ep_ops;
+		list_add_tail(&bep->ep.ep_list, &udc->gadget.ep_list);
+		bep->halted = 0;
+		usb_ep_set_maxpacket_limit(&bep->ep, BCM63XX_MAX_CTRL_PKT);
+		bep->udc = udc;
+		bep->ep.desc = NULL;
+		INIT_LIST_HEAD(&bep->queue);
+	}
+
+	udc->gadget.ep0 = &udc->bep[0].ep;
+	list_del(&udc->bep[0].ep.ep_list);
+
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->ep0state = EP0_SHUTDOWN;
+
+	udc->usbh_clk = clk_get(udc->dev, "usbh");
+	if (IS_ERR(udc->usbh_clk))
+		return -EIO;
+
+	udc->usbd_clk = clk_get(udc->dev, "usbd");
+	if (IS_ERR(udc->usbd_clk)) {
+		clk_put(udc->usbh_clk);
+		return -EIO;
+	}
+
+	set_clocks(udc, true);
+
+	val = USBD_CONTROL_AUTO_CSRS_MASK |
+	      USBD_CONTROL_DONE_CSRS_MASK |
+	      (irq_coalesce ? USBD_CONTROL_RXZSCFG_MASK : 0);
+	usbd_writel(udc, val, USBD_CONTROL_REG);
+
+	val = USBD_STRAPS_APP_SELF_PWR_MASK |
+	      USBD_STRAPS_APP_RAM_IF_MASK |
+	      USBD_STRAPS_APP_CSRPRGSUP_MASK |
+	      USBD_STRAPS_APP_8BITPHY_MASK |
+	      USBD_STRAPS_APP_RMTWKUP_MASK;
+
+	if (udc->gadget.max_speed == USB_SPEED_HIGH)
+		val |= (BCM63XX_SPD_HIGH << USBD_STRAPS_SPEED_SHIFT);
+	else
+		val |= (BCM63XX_SPD_FULL << USBD_STRAPS_SPEED_SHIFT);
+	usbd_writel(udc, val, USBD_STRAPS_REG);
+
+	bcm63xx_set_ctrl_irqs(udc, false);
+
+	usbd_writel(udc, 0, USBD_EVENT_IRQ_CFG_LO_REG);
+
+	val = USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_ENUM_ON) |
+	      USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_SET_CSRS);
+	usbd_writel(udc, val, USBD_EVENT_IRQ_CFG_HI_REG);
+
+	rc = iudma_init(udc);
+	set_clocks(udc, false);
+	if (rc)
+		bcm63xx_uninit_udc_hw(udc);
+
+	return 0;
+}
+
+/***********************************************************************
+ * Standard EP gadget operations
+ ***********************************************************************/
+
+/**
+ * bcm63xx_ep_enable - Enable one endpoint.
+ * @ep: Endpoint to enable.
+ * @desc: Contains max packet, direction, etc.
+ *
+ * Most of the endpoint parameters are fixed in this controller, so there
+ * isn't much for this function to do.
+ */
+static int bcm63xx_ep_enable(struct usb_ep *ep,
+	const struct usb_endpoint_descriptor *desc)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	struct iudma_ch *iudma = bep->iudma;
+	unsigned long flags;
+
+	if (!ep || !desc || ep->name == bcm63xx_ep0name)
+		return -EINVAL;
+
+	if (!udc->driver)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (iudma->enabled) {
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return -EINVAL;
+	}
+
+	iudma->enabled = true;
+	BUG_ON(!list_empty(&bep->queue));
+
+	iudma_reset_channel(udc, iudma);
+
+	bep->halted = 0;
+	bcm63xx_set_stall(udc, bep, false);
+	clear_bit(bep->ep_num, &udc->wedgemap);
+
+	ep->desc = desc;
+	ep->maxpacket = usb_endpoint_maxp(desc);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/**
+ * bcm63xx_ep_disable - Disable one endpoint.
+ * @ep: Endpoint to disable.
+ */
+static int bcm63xx_ep_disable(struct usb_ep *ep)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	struct iudma_ch *iudma = bep->iudma;
+	struct bcm63xx_req *breq, *n;
+	unsigned long flags;
+
+	if (!ep || !ep->desc)
+		return -EINVAL;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (!iudma->enabled) {
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return -EINVAL;
+	}
+	iudma->enabled = false;
+
+	iudma_reset_channel(udc, iudma);
+
+	if (!list_empty(&bep->queue)) {
+		list_for_each_entry_safe(breq, n, &bep->queue, queue) {
+			usb_gadget_unmap_request(&udc->gadget, &breq->req,
+						 iudma->is_tx);
+			list_del(&breq->queue);
+			breq->req.status = -ESHUTDOWN;
+
+			spin_unlock_irqrestore(&udc->lock, flags);
+			usb_gadget_giveback_request(&iudma->bep->ep, &breq->req);
+			spin_lock_irqsave(&udc->lock, flags);
+		}
+	}
+	ep->desc = NULL;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/**
+ * bcm63xx_udc_alloc_request - Allocate a new request.
+ * @ep: Endpoint associated with the request.
+ * @mem_flags: Flags to pass to kzalloc().
+ */
+static struct usb_request *bcm63xx_udc_alloc_request(struct usb_ep *ep,
+	gfp_t mem_flags)
+{
+	struct bcm63xx_req *breq;
+
+	breq = kzalloc(sizeof(*breq), mem_flags);
+	if (!breq)
+		return NULL;
+	return &breq->req;
+}
+
+/**
+ * bcm63xx_udc_free_request - Free a request.
+ * @ep: Endpoint associated with the request.
+ * @req: Request to free.
+ */
+static void bcm63xx_udc_free_request(struct usb_ep *ep,
+	struct usb_request *req)
+{
+	struct bcm63xx_req *breq = our_req(req);
+	kfree(breq);
+}
+
+/**
+ * bcm63xx_udc_queue - Queue up a new request.
+ * @ep: Endpoint associated with the request.
+ * @req: Request to add.
+ * @mem_flags: Unused.
+ *
+ * If the queue is empty, start this request immediately.  Otherwise, add
+ * it to the list.
+ *
+ * ep0 replies are sent through this function from the gadget driver, but
+ * they are treated differently because they need to be handled by the ep0
+ * state machine.  (Sometimes they are replies to control requests that
+ * were spoofed by this driver, and so they shouldn't be transmitted at all.)
+ */
+static int bcm63xx_udc_queue(struct usb_ep *ep, struct usb_request *req,
+	gfp_t mem_flags)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	struct bcm63xx_req *breq = our_req(req);
+	unsigned long flags;
+	int rc = 0;
+
+	if (unlikely(!req || !req->complete || !req->buf || !ep))
+		return -EINVAL;
+
+	req->actual = 0;
+	req->status = 0;
+	breq->offset = 0;
+
+	if (bep == &udc->bep[0]) {
+		/* only one reply per request, please */
+		if (udc->ep0_reply)
+			return -EINVAL;
+
+		udc->ep0_reply = req;
+		schedule_work(&udc->ep0_wq);
+		return 0;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (!bep->iudma->enabled) {
+		rc = -ESHUTDOWN;
+		goto out;
+	}
+
+	rc = usb_gadget_map_request(&udc->gadget, req, bep->iudma->is_tx);
+	if (rc == 0) {
+		list_add_tail(&breq->queue, &bep->queue);
+		if (list_is_singular(&bep->queue))
+			iudma_write(udc, bep->iudma, breq);
+	}
+
+out:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return rc;
+}
+
+/**
+ * bcm63xx_udc_dequeue - Remove a pending request from the queue.
+ * @ep: Endpoint associated with the request.
+ * @req: Request to remove.
+ *
+ * If the request is not at the head of the queue, this is easy - just nuke
+ * it.  If the request is at the head of the queue, we'll need to stop the
+ * DMA transaction and then queue up the successor.
+ */
+static int bcm63xx_udc_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	struct bcm63xx_req *breq = our_req(req), *cur;
+	unsigned long flags;
+	int rc = 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (list_empty(&bep->queue)) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	cur = list_first_entry(&bep->queue, struct bcm63xx_req, queue);
+	usb_gadget_unmap_request(&udc->gadget, &breq->req, bep->iudma->is_tx);
+
+	if (breq == cur) {
+		iudma_reset_channel(udc, bep->iudma);
+		list_del(&breq->queue);
+
+		if (!list_empty(&bep->queue)) {
+			struct bcm63xx_req *next;
+
+			next = list_first_entry(&bep->queue,
+				struct bcm63xx_req, queue);
+			iudma_write(udc, bep->iudma, next);
+		}
+	} else {
+		list_del(&breq->queue);
+	}
+
+out:
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	req->status = -ESHUTDOWN;
+	req->complete(ep, req);
+
+	return rc;
+}
+
+/**
+ * bcm63xx_udc_set_halt - Enable/disable STALL flag in the hardware.
+ * @ep: Endpoint to halt.
+ * @value: Zero to clear halt; nonzero to set halt.
+ *
+ * See comments in bcm63xx_update_wedge().
+ */
+static int bcm63xx_udc_set_halt(struct usb_ep *ep, int value)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	bcm63xx_set_stall(udc, bep, !!value);
+	bep->halted = value;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/**
+ * bcm63xx_udc_set_wedge - Stall the endpoint until the next reset.
+ * @ep: Endpoint to wedge.
+ *
+ * See comments in bcm63xx_update_wedge().
+ */
+static int bcm63xx_udc_set_wedge(struct usb_ep *ep)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	set_bit(bep->ep_num, &udc->wedgemap);
+	bcm63xx_set_stall(udc, bep, true);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_ep_ops bcm63xx_udc_ep_ops = {
+	.enable		= bcm63xx_ep_enable,
+	.disable	= bcm63xx_ep_disable,
+
+	.alloc_request	= bcm63xx_udc_alloc_request,
+	.free_request	= bcm63xx_udc_free_request,
+
+	.queue		= bcm63xx_udc_queue,
+	.dequeue	= bcm63xx_udc_dequeue,
+
+	.set_halt	= bcm63xx_udc_set_halt,
+	.set_wedge	= bcm63xx_udc_set_wedge,
+};
+
+/***********************************************************************
+ * EP0 handling
+ ***********************************************************************/
+
+/**
+ * bcm63xx_ep0_setup_callback - Drop spinlock to invoke ->setup callback.
+ * @udc: Reference to the device controller.
+ * @ctrl: 8-byte SETUP request.
+ */
+static int bcm63xx_ep0_setup_callback(struct bcm63xx_udc *udc,
+	struct usb_ctrlrequest *ctrl)
+{
+	int rc;
+
+	spin_unlock_irq(&udc->lock);
+	rc = udc->driver->setup(&udc->gadget, ctrl);
+	spin_lock_irq(&udc->lock);
+	return rc;
+}
+
+/**
+ * bcm63xx_ep0_spoof_set_cfg - Synthesize a SET_CONFIGURATION request.
+ * @udc: Reference to the device controller.
+ *
+ * Many standard requests are handled automatically in the hardware, but
+ * we still need to pass them to the gadget driver so that it can
+ * reconfigure the interfaces/endpoints if necessary.
+ *
+ * Unfortunately we are not able to send a STALL response if the host
+ * requests an invalid configuration.  If this happens, we'll have to be
+ * content with printing a warning.
+ */
+static int bcm63xx_ep0_spoof_set_cfg(struct bcm63xx_udc *udc)
+{
+	struct usb_ctrlrequest ctrl;
+	int rc;
+
+	ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_DEVICE;
+	ctrl.bRequest = USB_REQ_SET_CONFIGURATION;
+	ctrl.wValue = cpu_to_le16(udc->cfg);
+	ctrl.wIndex = 0;
+	ctrl.wLength = 0;
+
+	rc = bcm63xx_ep0_setup_callback(udc, &ctrl);
+	if (rc < 0) {
+		dev_warn_ratelimited(udc->dev,
+			"hardware auto-acked bad SET_CONFIGURATION(%d) request\n",
+			udc->cfg);
+	}
+	return rc;
+}
+
+/**
+ * bcm63xx_ep0_spoof_set_iface - Synthesize a SET_INTERFACE request.
+ * @udc: Reference to the device controller.
+ */
+static int bcm63xx_ep0_spoof_set_iface(struct bcm63xx_udc *udc)
+{
+	struct usb_ctrlrequest ctrl;
+	int rc;
+
+	ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_INTERFACE;
+	ctrl.bRequest = USB_REQ_SET_INTERFACE;
+	ctrl.wValue = cpu_to_le16(udc->alt_iface);
+	ctrl.wIndex = cpu_to_le16(udc->iface);
+	ctrl.wLength = 0;
+
+	rc = bcm63xx_ep0_setup_callback(udc, &ctrl);
+	if (rc < 0) {
+		dev_warn_ratelimited(udc->dev,
+			"hardware auto-acked bad SET_INTERFACE(%d,%d) request\n",
+			udc->iface, udc->alt_iface);
+	}
+	return rc;
+}
+
+/**
+ * bcm63xx_ep0_map_write - dma_map and iudma_write a single request.
+ * @udc: Reference to the device controller.
+ * @ch_idx: IUDMA channel number.
+ * @req: USB gadget layer representation of the request.
+ */
+static void bcm63xx_ep0_map_write(struct bcm63xx_udc *udc, int ch_idx,
+	struct usb_request *req)
+{
+	struct bcm63xx_req *breq = our_req(req);
+	struct iudma_ch *iudma = &udc->iudma[ch_idx];
+
+	BUG_ON(udc->ep0_request);
+	udc->ep0_request = req;
+
+	req->actual = 0;
+	breq->offset = 0;
+	usb_gadget_map_request(&udc->gadget, req, iudma->is_tx);
+	iudma_write(udc, iudma, breq);
+}
+
+/**
+ * bcm63xx_ep0_complete - Set completion status and "stage" the callback.
+ * @udc: Reference to the device controller.
+ * @req: USB gadget layer representation of the request.
+ * @status: Status to return to the gadget driver.
+ */
+static void bcm63xx_ep0_complete(struct bcm63xx_udc *udc,
+	struct usb_request *req, int status)
+{
+	req->status = status;
+	if (status)
+		req->actual = 0;
+	if (req->complete) {
+		spin_unlock_irq(&udc->lock);
+		req->complete(&udc->bep[0].ep, req);
+		spin_lock_irq(&udc->lock);
+	}
+}
+
+/**
+ * bcm63xx_ep0_nuke_reply - Abort request from the gadget driver due to
+ *   reset/shutdown.
+ * @udc: Reference to the device controller.
+ * @is_tx: Nonzero for TX (IN), zero for RX (OUT).
+ */
+static void bcm63xx_ep0_nuke_reply(struct bcm63xx_udc *udc, int is_tx)
+{
+	struct usb_request *req = udc->ep0_reply;
+
+	udc->ep0_reply = NULL;
+	usb_gadget_unmap_request(&udc->gadget, req, is_tx);
+	if (udc->ep0_request == req) {
+		udc->ep0_req_completed = 0;
+		udc->ep0_request = NULL;
+	}
+	bcm63xx_ep0_complete(udc, req, -ESHUTDOWN);
+}
+
+/**
+ * bcm63xx_ep0_read_complete - Close out the pending ep0 request; return
+ *   transfer len.
+ * @udc: Reference to the device controller.
+ */
+static int bcm63xx_ep0_read_complete(struct bcm63xx_udc *udc)
+{
+	struct usb_request *req = udc->ep0_request;
+
+	udc->ep0_req_completed = 0;
+	udc->ep0_request = NULL;
+
+	return req->actual;
+}
+
+/**
+ * bcm63xx_ep0_internal_request - Helper function to submit an ep0 request.
+ * @udc: Reference to the device controller.
+ * @ch_idx: IUDMA channel number.
+ * @length: Number of bytes to TX/RX.
+ *
+ * Used for simple transfers performed by the ep0 worker.  This will always
+ * use ep0_ctrl_req / ep0_ctrl_buf.
+ */
+static void bcm63xx_ep0_internal_request(struct bcm63xx_udc *udc, int ch_idx,
+	int length)
+{
+	struct usb_request *req = &udc->ep0_ctrl_req.req;
+
+	req->buf = udc->ep0_ctrl_buf;
+	req->length = length;
+	req->complete = NULL;
+
+	bcm63xx_ep0_map_write(udc, ch_idx, req);
+}
+
+/**
+ * bcm63xx_ep0_do_setup - Parse new SETUP packet and decide how to handle it.
+ * @udc: Reference to the device controller.
+ *
+ * EP0_IDLE probably shouldn't ever happen.  EP0_REQUEUE means we're ready
+ * for the next packet.  Anything else means the transaction requires multiple
+ * stages of handling.
+ */
+static enum bcm63xx_ep0_state bcm63xx_ep0_do_setup(struct bcm63xx_udc *udc)
+{
+	int rc;
+	struct usb_ctrlrequest *ctrl = (void *)udc->ep0_ctrl_buf;
+
+	rc = bcm63xx_ep0_read_complete(udc);
+
+	if (rc < 0) {
+		dev_err(udc->dev, "missing SETUP packet\n");
+		return EP0_IDLE;
+	}
+
+	/*
+	 * Handle 0-byte IN STATUS acknowledgement.  The hardware doesn't
+	 * ALWAYS deliver these 100% of the time, so if we happen to see one,
+	 * just throw it away.
+	 */
+	if (rc == 0)
+		return EP0_REQUEUE;
+
+	/* Drop malformed SETUP packets */
+	if (rc != sizeof(*ctrl)) {
+		dev_warn_ratelimited(udc->dev,
+			"malformed SETUP packet (%d bytes)\n", rc);
+		return EP0_REQUEUE;
+	}
+
+	/* Process new SETUP packet arriving on ep0 */
+	rc = bcm63xx_ep0_setup_callback(udc, ctrl);
+	if (rc < 0) {
+		bcm63xx_set_stall(udc, &udc->bep[0], true);
+		return EP0_REQUEUE;
+	}
+
+	if (!ctrl->wLength)
+		return EP0_REQUEUE;
+	else if (ctrl->bRequestType & USB_DIR_IN)
+		return EP0_IN_DATA_PHASE_SETUP;
+	else
+		return EP0_OUT_DATA_PHASE_SETUP;
+}
+
+/**
+ * bcm63xx_ep0_do_idle - Check for outstanding requests if ep0 is idle.
+ * @udc: Reference to the device controller.
+ *
+ * In state EP0_IDLE, the RX descriptor is either pending, or has been
+ * filled with a SETUP packet from the host.  This function handles new
+ * SETUP packets, control IRQ events (which can generate fake SETUP packets),
+ * and reset/shutdown events.
+ *
+ * Returns 0 if work was done; -EAGAIN if nothing to do.
+ */
+static int bcm63xx_ep0_do_idle(struct bcm63xx_udc *udc)
+{
+	if (udc->ep0_req_reset) {
+		udc->ep0_req_reset = 0;
+	} else if (udc->ep0_req_set_cfg) {
+		udc->ep0_req_set_cfg = 0;
+		if (bcm63xx_ep0_spoof_set_cfg(udc) >= 0)
+			udc->ep0state = EP0_IN_FAKE_STATUS_PHASE;
+	} else if (udc->ep0_req_set_iface) {
+		udc->ep0_req_set_iface = 0;
+		if (bcm63xx_ep0_spoof_set_iface(udc) >= 0)
+			udc->ep0state = EP0_IN_FAKE_STATUS_PHASE;
+	} else if (udc->ep0_req_completed) {
+		udc->ep0state = bcm63xx_ep0_do_setup(udc);
+		return udc->ep0state == EP0_IDLE ? -EAGAIN : 0;
+	} else if (udc->ep0_req_shutdown) {
+		udc->ep0_req_shutdown = 0;
+		udc->ep0_req_completed = 0;
+		udc->ep0_request = NULL;
+		iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]);
+		usb_gadget_unmap_request(&udc->gadget,
+			&udc->ep0_ctrl_req.req, 0);
+
+		/* bcm63xx_udc_pullup() is waiting for this */
+		mb();
+		udc->ep0state = EP0_SHUTDOWN;
+	} else if (udc->ep0_reply) {
+		/*
+		 * This could happen if a USB RESET shows up during an ep0
+		 * transaction (especially if a laggy driver like gadgetfs
+		 * is in use).
+		 */
+		dev_warn(udc->dev, "nuking unexpected reply\n");
+		bcm63xx_ep0_nuke_reply(udc, 0);
+	} else {
+		return -EAGAIN;
+	}
+
+	return 0;
+}
+
+/**
+ * bcm63xx_ep0_one_round - Handle the current ep0 state.
+ * @udc: Reference to the device controller.
+ *
+ * Returns 0 if work was done; -EAGAIN if nothing to do.
+ */
+static int bcm63xx_ep0_one_round(struct bcm63xx_udc *udc)
+{
+	enum bcm63xx_ep0_state ep0state = udc->ep0state;
+	bool shutdown = udc->ep0_req_reset || udc->ep0_req_shutdown;
+
+	switch (udc->ep0state) {
+	case EP0_REQUEUE:
+		/* set up descriptor to receive SETUP packet */
+		bcm63xx_ep0_internal_request(udc, IUDMA_EP0_RXCHAN,
+					     BCM63XX_MAX_CTRL_PKT);
+		ep0state = EP0_IDLE;
+		break;
+	case EP0_IDLE:
+		return bcm63xx_ep0_do_idle(udc);
+	case EP0_IN_DATA_PHASE_SETUP:
+		/*
+		 * Normal case: TX request is in ep0_reply (queued by the
+		 * callback), or will be queued shortly.  When it's here,
+		 * send it to the HW and go to EP0_IN_DATA_PHASE_COMPLETE.
+		 *
+		 * Shutdown case: Stop waiting for the reply.  Just
+		 * REQUEUE->IDLE.  The gadget driver is NOT expected to
+		 * queue anything else now.
+		 */
+		if (udc->ep0_reply) {
+			bcm63xx_ep0_map_write(udc, IUDMA_EP0_TXCHAN,
+					      udc->ep0_reply);
+			ep0state = EP0_IN_DATA_PHASE_COMPLETE;
+		} else if (shutdown) {
+			ep0state = EP0_REQUEUE;
+		}
+		break;
+	case EP0_IN_DATA_PHASE_COMPLETE: {
+		/*
+		 * Normal case: TX packet (ep0_reply) is in flight; wait for
+		 * it to finish, then go back to REQUEUE->IDLE.
+		 *
+		 * Shutdown case: Reset the TX channel, send -ESHUTDOWN
+		 * completion to the gadget driver, then REQUEUE->IDLE.
+		 */
+		if (udc->ep0_req_completed) {
+			udc->ep0_reply = NULL;
+			bcm63xx_ep0_read_complete(udc);
+			/*
+			 * the "ack" sometimes gets eaten (see
+			 * bcm63xx_ep0_do_idle)
+			 */
+			ep0state = EP0_REQUEUE;
+		} else if (shutdown) {
+			iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]);
+			bcm63xx_ep0_nuke_reply(udc, 1);
+			ep0state = EP0_REQUEUE;
+		}
+		break;
+	}
+	case EP0_OUT_DATA_PHASE_SETUP:
+		/* Similar behavior to EP0_IN_DATA_PHASE_SETUP */
+		if (udc->ep0_reply) {
+			bcm63xx_ep0_map_write(udc, IUDMA_EP0_RXCHAN,
+					      udc->ep0_reply);
+			ep0state = EP0_OUT_DATA_PHASE_COMPLETE;
+		} else if (shutdown) {
+			ep0state = EP0_REQUEUE;
+		}
+		break;
+	case EP0_OUT_DATA_PHASE_COMPLETE: {
+		/* Similar behavior to EP0_IN_DATA_PHASE_COMPLETE */
+		if (udc->ep0_req_completed) {
+			udc->ep0_reply = NULL;
+			bcm63xx_ep0_read_complete(udc);
+
+			/* send 0-byte ack to host */
+			bcm63xx_ep0_internal_request(udc, IUDMA_EP0_TXCHAN, 0);
+			ep0state = EP0_OUT_STATUS_PHASE;
+		} else if (shutdown) {
+			iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]);
+			bcm63xx_ep0_nuke_reply(udc, 0);
+			ep0state = EP0_REQUEUE;
+		}
+		break;
+	}
+	case EP0_OUT_STATUS_PHASE:
+		/*
+		 * Normal case: 0-byte OUT ack packet is in flight; wait
+		 * for it to finish, then go back to REQUEUE->IDLE.
+		 *
+		 * Shutdown case: just cancel the transmission.  Don't bother
+		 * calling the completion, because it originated from this
+		 * function anyway.  Then go back to REQUEUE->IDLE.
+		 */
+		if (udc->ep0_req_completed) {
+			bcm63xx_ep0_read_complete(udc);
+			ep0state = EP0_REQUEUE;
+		} else if (shutdown) {
+			iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]);
+			udc->ep0_request = NULL;
+			ep0state = EP0_REQUEUE;
+		}
+		break;
+	case EP0_IN_FAKE_STATUS_PHASE: {
+		/*
+		 * Normal case: we spoofed a SETUP packet and are now
+		 * waiting for the gadget driver to send a 0-byte reply.
+		 * This doesn't actually get sent to the HW because the
+		 * HW has already sent its own reply.  Once we get the
+		 * response, return to IDLE.
+		 *
+		 * Shutdown case: return to IDLE immediately.
+		 *
+		 * Note that the ep0 RX descriptor has remained queued
+		 * (and possibly unfilled) during this entire transaction.
+		 * The HW datapath (IUDMA) never even sees SET_CONFIGURATION
+		 * or SET_INTERFACE transactions.
+		 */
+		struct usb_request *r = udc->ep0_reply;
+
+		if (!r) {
+			if (shutdown)
+				ep0state = EP0_IDLE;
+			break;
+		}
+
+		bcm63xx_ep0_complete(udc, r, 0);
+		udc->ep0_reply = NULL;
+		ep0state = EP0_IDLE;
+		break;
+	}
+	case EP0_SHUTDOWN:
+		break;
+	}
+
+	if (udc->ep0state == ep0state)
+		return -EAGAIN;
+
+	udc->ep0state = ep0state;
+	return 0;
+}
+
+/**
+ * bcm63xx_ep0_process - ep0 worker thread / state machine.
+ * @w: Workqueue struct.
+ *
+ * bcm63xx_ep0_process is triggered any time an event occurs on ep0.  It
+ * is used to synchronize ep0 events and ensure that both HW and SW events
+ * occur in a well-defined order.  When the ep0 IUDMA queues are idle, it may
+ * synthesize SET_CONFIGURATION / SET_INTERFACE requests that were consumed
+ * by the USBD hardware.
+ *
+ * The worker function will continue iterating around the state machine
+ * until there is nothing left to do.  Usually "nothing left to do" means
+ * that we're waiting for a new event from the hardware.
+ */
+static void bcm63xx_ep0_process(struct work_struct *w)
+{
+	struct bcm63xx_udc *udc = container_of(w, struct bcm63xx_udc, ep0_wq);
+	spin_lock_irq(&udc->lock);
+	while (bcm63xx_ep0_one_round(udc) == 0)
+		;
+	spin_unlock_irq(&udc->lock);
+}
+
+/***********************************************************************
+ * Standard UDC gadget operations
+ ***********************************************************************/
+
+/**
+ * bcm63xx_udc_get_frame - Read current SOF frame number from the HW.
+ * @gadget: USB device.
+ */
+static int bcm63xx_udc_get_frame(struct usb_gadget *gadget)
+{
+	struct bcm63xx_udc *udc = gadget_to_udc(gadget);
+
+	return (usbd_readl(udc, USBD_STATUS_REG) &
+		USBD_STATUS_SOF_MASK) >> USBD_STATUS_SOF_SHIFT;
+}
+
+/**
+ * bcm63xx_udc_pullup - Enable/disable pullup on D+ line.
+ * @gadget: USB device.
+ * @is_on: 0 to disable pullup, 1 to enable.
+ *
+ * See notes in bcm63xx_select_pullup().
+ */
+static int bcm63xx_udc_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct bcm63xx_udc *udc = gadget_to_udc(gadget);
+	unsigned long flags;
+	int i, rc = -EINVAL;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (is_on && udc->ep0state == EP0_SHUTDOWN) {
+		udc->gadget.speed = USB_SPEED_UNKNOWN;
+		udc->ep0state = EP0_REQUEUE;
+		bcm63xx_fifo_setup(udc);
+		bcm63xx_fifo_reset(udc);
+		bcm63xx_ep_setup(udc);
+
+		bitmap_zero(&udc->wedgemap, BCM63XX_NUM_EP);
+		for (i = 0; i < BCM63XX_NUM_EP; i++)
+			bcm63xx_set_stall(udc, &udc->bep[i], false);
+
+		bcm63xx_set_ctrl_irqs(udc, true);
+		bcm63xx_select_pullup(gadget_to_udc(gadget), true);
+		rc = 0;
+	} else if (!is_on && udc->ep0state != EP0_SHUTDOWN) {
+		bcm63xx_select_pullup(gadget_to_udc(gadget), false);
+
+		udc->ep0_req_shutdown = 1;
+		spin_unlock_irqrestore(&udc->lock, flags);
+
+		while (1) {
+			schedule_work(&udc->ep0_wq);
+			if (udc->ep0state == EP0_SHUTDOWN)
+				break;
+			msleep(50);
+		}
+		bcm63xx_set_ctrl_irqs(udc, false);
+		cancel_work_sync(&udc->ep0_wq);
+		return 0;
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return rc;
+}
+
+/**
+ * bcm63xx_udc_start - Start the controller.
+ * @gadget: USB device.
+ * @driver: Driver for USB device.
+ */
+static int bcm63xx_udc_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct bcm63xx_udc *udc = gadget_to_udc(gadget);
+	unsigned long flags;
+
+	if (!driver || driver->max_speed < USB_SPEED_HIGH ||
+	    !driver->setup)
+		return -EINVAL;
+	if (!udc)
+		return -ENODEV;
+	if (udc->driver)
+		return -EBUSY;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	set_clocks(udc, true);
+	bcm63xx_fifo_setup(udc);
+	bcm63xx_ep_init(udc);
+	bcm63xx_ep_setup(udc);
+	bcm63xx_fifo_reset(udc);
+	bcm63xx_select_phy_mode(udc, true);
+
+	udc->driver = driver;
+	udc->gadget.dev.of_node = udc->dev->of_node;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/**
+ * bcm63xx_udc_stop - Shut down the controller.
+ * @gadget: USB device.
+ * @driver: Driver for USB device.
+ */
+static int bcm63xx_udc_stop(struct usb_gadget *gadget)
+{
+	struct bcm63xx_udc *udc = gadget_to_udc(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	udc->driver = NULL;
+
+	/*
+	 * If we switch the PHY too abruptly after dropping D+, the host
+	 * will often complain:
+	 *
+	 *     hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
+	 */
+	msleep(100);
+
+	bcm63xx_select_phy_mode(udc, false);
+	set_clocks(udc, false);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops bcm63xx_udc_ops = {
+	.get_frame	= bcm63xx_udc_get_frame,
+	.pullup		= bcm63xx_udc_pullup,
+	.udc_start	= bcm63xx_udc_start,
+	.udc_stop	= bcm63xx_udc_stop,
+};
+
+/***********************************************************************
+ * IRQ handling
+ ***********************************************************************/
+
+/**
+ * bcm63xx_update_cfg_iface - Read current configuration/interface settings.
+ * @udc: Reference to the device controller.
+ *
+ * This controller intercepts SET_CONFIGURATION and SET_INTERFACE messages.
+ * The driver never sees the raw control packets coming in on the ep0
+ * IUDMA channel, but at least we get an interrupt event to tell us that
+ * new values are waiting in the USBD_STATUS register.
+ */
+static void bcm63xx_update_cfg_iface(struct bcm63xx_udc *udc)
+{
+	u32 reg = usbd_readl(udc, USBD_STATUS_REG);
+
+	udc->cfg = (reg & USBD_STATUS_CFG_MASK) >> USBD_STATUS_CFG_SHIFT;
+	udc->iface = (reg & USBD_STATUS_INTF_MASK) >> USBD_STATUS_INTF_SHIFT;
+	udc->alt_iface = (reg & USBD_STATUS_ALTINTF_MASK) >>
+			 USBD_STATUS_ALTINTF_SHIFT;
+	bcm63xx_ep_setup(udc);
+}
+
+/**
+ * bcm63xx_update_link_speed - Check to see if the link speed has changed.
+ * @udc: Reference to the device controller.
+ *
+ * The link speed update coincides with a SETUP IRQ.  Returns 1 if the
+ * speed has changed, so that the caller can update the endpoint settings.
+ */
+static int bcm63xx_update_link_speed(struct bcm63xx_udc *udc)
+{
+	u32 reg = usbd_readl(udc, USBD_STATUS_REG);
+	enum usb_device_speed oldspeed = udc->gadget.speed;
+
+	switch ((reg & USBD_STATUS_SPD_MASK) >> USBD_STATUS_SPD_SHIFT) {
+	case BCM63XX_SPD_HIGH:
+		udc->gadget.speed = USB_SPEED_HIGH;
+		break;
+	case BCM63XX_SPD_FULL:
+		udc->gadget.speed = USB_SPEED_FULL;
+		break;
+	default:
+		/* this should never happen */
+		udc->gadget.speed = USB_SPEED_UNKNOWN;
+		dev_err(udc->dev,
+			"received SETUP packet with invalid link speed\n");
+		return 0;
+	}
+
+	if (udc->gadget.speed != oldspeed) {
+		dev_info(udc->dev, "link up, %s-speed mode\n",
+			 udc->gadget.speed == USB_SPEED_HIGH ? "high" : "full");
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+/**
+ * bcm63xx_update_wedge - Iterate through wedged endpoints.
+ * @udc: Reference to the device controller.
+ * @new_status: true to "refresh" wedge status; false to clear it.
+ *
+ * On a SETUP interrupt, we need to manually "refresh" the wedge status
+ * because the controller hardware is designed to automatically clear
+ * stalls in response to a CLEAR_FEATURE request from the host.
+ *
+ * On a RESET interrupt, we do want to restore all wedged endpoints.
+ */
+static void bcm63xx_update_wedge(struct bcm63xx_udc *udc, bool new_status)
+{
+	int i;
+
+	for_each_set_bit(i, &udc->wedgemap, BCM63XX_NUM_EP) {
+		bcm63xx_set_stall(udc, &udc->bep[i], new_status);
+		if (!new_status)
+			clear_bit(i, &udc->wedgemap);
+	}
+}
+
+/**
+ * bcm63xx_udc_ctrl_isr - ISR for control path events (USBD).
+ * @irq: IRQ number (unused).
+ * @dev_id: Reference to the device controller.
+ *
+ * This is where we handle link (VBUS) down, USB reset, speed changes,
+ * SET_CONFIGURATION, and SET_INTERFACE events.
+ */
+static irqreturn_t bcm63xx_udc_ctrl_isr(int irq, void *dev_id)
+{
+	struct bcm63xx_udc *udc = dev_id;
+	u32 stat;
+	bool disconnected = false, bus_reset = false;
+
+	stat = usbd_readl(udc, USBD_EVENT_IRQ_STATUS_REG) &
+	       usbd_readl(udc, USBD_EVENT_IRQ_MASK_REG);
+
+	usbd_writel(udc, stat, USBD_EVENT_IRQ_STATUS_REG);
+
+	spin_lock(&udc->lock);
+	if (stat & BIT(USBD_EVENT_IRQ_USB_LINK)) {
+		/* VBUS toggled */
+
+		if (!(usbd_readl(udc, USBD_EVENTS_REG) &
+		      USBD_EVENTS_USB_LINK_MASK) &&
+		      udc->gadget.speed != USB_SPEED_UNKNOWN)
+			dev_info(udc->dev, "link down\n");
+
+		udc->gadget.speed = USB_SPEED_UNKNOWN;
+		disconnected = true;
+	}
+	if (stat & BIT(USBD_EVENT_IRQ_USB_RESET)) {
+		bcm63xx_fifo_setup(udc);
+		bcm63xx_fifo_reset(udc);
+		bcm63xx_ep_setup(udc);
+
+		bcm63xx_update_wedge(udc, false);
+
+		udc->ep0_req_reset = 1;
+		schedule_work(&udc->ep0_wq);
+		bus_reset = true;
+	}
+	if (stat & BIT(USBD_EVENT_IRQ_SETUP)) {
+		if (bcm63xx_update_link_speed(udc)) {
+			bcm63xx_fifo_setup(udc);
+			bcm63xx_ep_setup(udc);
+		}
+		bcm63xx_update_wedge(udc, true);
+	}
+	if (stat & BIT(USBD_EVENT_IRQ_SETCFG)) {
+		bcm63xx_update_cfg_iface(udc);
+		udc->ep0_req_set_cfg = 1;
+		schedule_work(&udc->ep0_wq);
+	}
+	if (stat & BIT(USBD_EVENT_IRQ_SETINTF)) {
+		bcm63xx_update_cfg_iface(udc);
+		udc->ep0_req_set_iface = 1;
+		schedule_work(&udc->ep0_wq);
+	}
+	spin_unlock(&udc->lock);
+
+	if (disconnected && udc->driver)
+		udc->driver->disconnect(&udc->gadget);
+	else if (bus_reset && udc->driver)
+		usb_gadget_udc_reset(&udc->gadget, udc->driver);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * bcm63xx_udc_data_isr - ISR for data path events (IUDMA).
+ * @irq: IRQ number (unused).
+ * @dev_id: Reference to the IUDMA channel that generated the interrupt.
+ *
+ * For the two ep0 channels, we have special handling that triggers the
+ * ep0 worker thread.  For normal bulk/intr channels, either queue up
+ * the next buffer descriptor for the transaction (incomplete transaction),
+ * or invoke the completion callback (complete transactions).
+ */
+static irqreturn_t bcm63xx_udc_data_isr(int irq, void *dev_id)
+{
+	struct iudma_ch *iudma = dev_id;
+	struct bcm63xx_udc *udc = iudma->udc;
+	struct bcm63xx_ep *bep;
+	struct usb_request *req = NULL;
+	struct bcm63xx_req *breq = NULL;
+	int rc;
+	bool is_done = false;
+
+	spin_lock(&udc->lock);
+
+	usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
+			ENETDMAC_IR_REG, iudma->ch_idx);
+	bep = iudma->bep;
+	rc = iudma_read(udc, iudma);
+
+	/* special handling for EP0 RX (0) and TX (1) */
+	if (iudma->ch_idx == IUDMA_EP0_RXCHAN ||
+	    iudma->ch_idx == IUDMA_EP0_TXCHAN) {
+		req = udc->ep0_request;
+		breq = our_req(req);
+
+		/* a single request could require multiple submissions */
+		if (rc >= 0) {
+			req->actual += rc;
+
+			if (req->actual >= req->length || breq->bd_bytes > rc) {
+				udc->ep0_req_completed = 1;
+				is_done = true;
+				schedule_work(&udc->ep0_wq);
+
+				/* "actual" on a ZLP is 1 byte */
+				req->actual = min(req->actual, req->length);
+			} else {
+				/* queue up the next BD (same request) */
+				iudma_write(udc, iudma, breq);
+			}
+		}
+	} else if (!list_empty(&bep->queue)) {
+		breq = list_first_entry(&bep->queue, struct bcm63xx_req, queue);
+		req = &breq->req;
+
+		if (rc >= 0) {
+			req->actual += rc;
+
+			if (req->actual >= req->length || breq->bd_bytes > rc) {
+				is_done = true;
+				list_del(&breq->queue);
+
+				req->actual = min(req->actual, req->length);
+
+				if (!list_empty(&bep->queue)) {
+					struct bcm63xx_req *next;
+
+					next = list_first_entry(&bep->queue,
+						struct bcm63xx_req, queue);
+					iudma_write(udc, iudma, next);
+				}
+			} else {
+				iudma_write(udc, iudma, breq);
+			}
+		}
+	}
+	spin_unlock(&udc->lock);
+
+	if (is_done) {
+		usb_gadget_unmap_request(&udc->gadget, req, iudma->is_tx);
+		if (req->complete)
+			req->complete(&bep->ep, req);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/***********************************************************************
+ * Debug filesystem
+ ***********************************************************************/
+
+/*
+ * bcm63xx_usbd_dbg_show - Show USBD controller state.
+ * @s: seq_file to which the information will be written.
+ * @p: Unused.
+ *
+ * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/usbd
+ */
+static int bcm63xx_usbd_dbg_show(struct seq_file *s, void *p)
+{
+	struct bcm63xx_udc *udc = s->private;
+
+	if (!udc->driver)
+		return -ENODEV;
+
+	seq_printf(s, "ep0 state: %s\n",
+		   bcm63xx_ep0_state_names[udc->ep0state]);
+	seq_printf(s, "  pending requests: %s%s%s%s%s%s%s\n",
+		   udc->ep0_req_reset ? "reset " : "",
+		   udc->ep0_req_set_cfg ? "set_cfg " : "",
+		   udc->ep0_req_set_iface ? "set_iface " : "",
+		   udc->ep0_req_shutdown ? "shutdown " : "",
+		   udc->ep0_request ? "pending " : "",
+		   udc->ep0_req_completed ? "completed " : "",
+		   udc->ep0_reply ? "reply " : "");
+	seq_printf(s, "cfg: %d; iface: %d; alt_iface: %d\n",
+		   udc->cfg, udc->iface, udc->alt_iface);
+	seq_printf(s, "regs:\n");
+	seq_printf(s, "  control: %08x; straps: %08x; status: %08x\n",
+		   usbd_readl(udc, USBD_CONTROL_REG),
+		   usbd_readl(udc, USBD_STRAPS_REG),
+		   usbd_readl(udc, USBD_STATUS_REG));
+	seq_printf(s, "  events:  %08x; stall:  %08x\n",
+		   usbd_readl(udc, USBD_EVENTS_REG),
+		   usbd_readl(udc, USBD_STALL_REG));
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(bcm63xx_usbd_dbg);
+
+/*
+ * bcm63xx_iudma_dbg_show - Show IUDMA status and descriptors.
+ * @s: seq_file to which the information will be written.
+ * @p: Unused.
+ *
+ * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/iudma
+ */
+static int bcm63xx_iudma_dbg_show(struct seq_file *s, void *p)
+{
+	struct bcm63xx_udc *udc = s->private;
+	int ch_idx, i;
+	u32 sram2, sram3;
+
+	if (!udc->driver)
+		return -ENODEV;
+
+	for (ch_idx = 0; ch_idx < BCM63XX_NUM_IUDMA; ch_idx++) {
+		struct iudma_ch *iudma = &udc->iudma[ch_idx];
+		struct list_head *pos;
+
+		seq_printf(s, "IUDMA channel %d -- ", ch_idx);
+		switch (iudma_defaults[ch_idx].ep_type) {
+		case BCMEP_CTRL:
+			seq_printf(s, "control");
+			break;
+		case BCMEP_BULK:
+			seq_printf(s, "bulk");
+			break;
+		case BCMEP_INTR:
+			seq_printf(s, "interrupt");
+			break;
+		}
+		seq_printf(s, ch_idx & 0x01 ? " tx" : " rx");
+		seq_printf(s, " [ep%d]:\n",
+			   max_t(int, iudma_defaults[ch_idx].ep_num, 0));
+		seq_printf(s, "  cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n",
+			   usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx),
+			   usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx),
+			   usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx),
+			   usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx));
+
+		sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx);
+		sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx);
+		seq_printf(s, "  base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n",
+			   usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx),
+			   sram2 >> 16, sram2 & 0xffff,
+			   sram3 >> 16, sram3 & 0xffff,
+			   usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx));
+		seq_printf(s, "  desc: %d/%d used", iudma->n_bds_used,
+			   iudma->n_bds);
+
+		if (iudma->bep) {
+			i = 0;
+			list_for_each(pos, &iudma->bep->queue)
+				i++;
+			seq_printf(s, "; %d queued\n", i);
+		} else {
+			seq_printf(s, "\n");
+		}
+
+		for (i = 0; i < iudma->n_bds; i++) {
+			struct bcm_enet_desc *d = &iudma->bd_ring[i];
+
+			seq_printf(s, "  %03x (%02x): len_stat: %04x_%04x; pa %08x",
+				   i * sizeof(*d), i,
+				   d->len_stat >> 16, d->len_stat & 0xffff,
+				   d->address);
+			if (d == iudma->read_bd)
+				seq_printf(s, "   <<RD");
+			if (d == iudma->write_bd)
+				seq_printf(s, "   <<WR");
+			seq_printf(s, "\n");
+		}
+
+		seq_printf(s, "\n");
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(bcm63xx_iudma_dbg);
+
+/**
+ * bcm63xx_udc_init_debugfs - Create debugfs entries.
+ * @udc: Reference to the device controller.
+ */
+static void bcm63xx_udc_init_debugfs(struct bcm63xx_udc *udc)
+{
+	struct dentry *root;
+
+	if (!IS_ENABLED(CONFIG_USB_GADGET_DEBUG_FS))
+		return;
+
+	root = debugfs_create_dir(udc->gadget.name, usb_debug_root);
+	debugfs_create_file("usbd", 0400, root, udc, &bcm63xx_usbd_dbg_fops);
+	debugfs_create_file("iudma", 0400, root, udc, &bcm63xx_iudma_dbg_fops);
+}
+
+/**
+ * bcm63xx_udc_cleanup_debugfs - Remove debugfs entries.
+ * @udc: Reference to the device controller.
+ *
+ * debugfs_remove() is safe to call with a NULL argument.
+ */
+static void bcm63xx_udc_cleanup_debugfs(struct bcm63xx_udc *udc)
+{
+	debugfs_lookup_and_remove(udc->gadget.name, usb_debug_root);
+}
+
+/***********************************************************************
+ * Driver init/exit
+ ***********************************************************************/
+
+/**
+ * bcm63xx_udc_probe - Initialize a new instance of the UDC.
+ * @pdev: Platform device struct from the bcm63xx BSP code.
+ *
+ * Note that platform data is required, because pd.port_no varies from chip
+ * to chip and is used to switch the correct USB port to device mode.
+ */
+static int bcm63xx_udc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct bcm63xx_usbd_platform_data *pd = dev_get_platdata(dev);
+	struct bcm63xx_udc *udc;
+	int rc = -ENOMEM, i, irq;
+
+	udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, udc);
+	udc->dev = dev;
+	udc->pd = pd;
+
+	if (!pd) {
+		dev_err(dev, "missing platform data\n");
+		return -EINVAL;
+	}
+
+	udc->usbd_regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(udc->usbd_regs))
+		return PTR_ERR(udc->usbd_regs);
+
+	udc->iudma_regs = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(udc->iudma_regs))
+		return PTR_ERR(udc->iudma_regs);
+
+	spin_lock_init(&udc->lock);
+	INIT_WORK(&udc->ep0_wq, bcm63xx_ep0_process);
+
+	udc->gadget.ops = &bcm63xx_udc_ops;
+	udc->gadget.name = dev_name(dev);
+
+	if (!pd->use_fullspeed && !use_fullspeed)
+		udc->gadget.max_speed = USB_SPEED_HIGH;
+	else
+		udc->gadget.max_speed = USB_SPEED_FULL;
+
+	/* request clocks, allocate buffers, and clear any pending IRQs */
+	rc = bcm63xx_init_udc_hw(udc);
+	if (rc)
+		return rc;
+
+	rc = -ENXIO;
+
+	/* IRQ resource #0: control interrupt (VBUS, speed, etc.) */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		rc = irq;
+		goto out_uninit;
+	}
+	if (devm_request_irq(dev, irq, &bcm63xx_udc_ctrl_isr, 0,
+			     dev_name(dev), udc) < 0)
+		goto report_request_failure;
+
+	/* IRQ resources #1-6: data interrupts for IUDMA channels 0-5 */
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
+		irq = platform_get_irq(pdev, i + 1);
+		if (irq < 0) {
+			rc = irq;
+			goto out_uninit;
+		}
+		if (devm_request_irq(dev, irq, &bcm63xx_udc_data_isr, 0,
+				     dev_name(dev), &udc->iudma[i]) < 0)
+			goto report_request_failure;
+	}
+
+	bcm63xx_udc_init_debugfs(udc);
+	rc = usb_add_gadget_udc(dev, &udc->gadget);
+	if (!rc)
+		return 0;
+
+	bcm63xx_udc_cleanup_debugfs(udc);
+out_uninit:
+	bcm63xx_uninit_udc_hw(udc);
+	return rc;
+
+report_request_failure:
+	dev_err(dev, "error requesting IRQ #%d\n", irq);
+	goto out_uninit;
+}
+
+/**
+ * bcm63xx_udc_remove - Remove the device from the system.
+ * @pdev: Platform device struct from the bcm63xx BSP code.
+ */
+static int bcm63xx_udc_remove(struct platform_device *pdev)
+{
+	struct bcm63xx_udc *udc = platform_get_drvdata(pdev);
+
+	bcm63xx_udc_cleanup_debugfs(udc);
+	usb_del_gadget_udc(&udc->gadget);
+	BUG_ON(udc->driver);
+
+	bcm63xx_uninit_udc_hw(udc);
+
+	return 0;
+}
+
+static struct platform_driver bcm63xx_udc_driver = {
+	.probe		= bcm63xx_udc_probe,
+	.remove		= bcm63xx_udc_remove,
+	.driver		= {
+		.name	= DRV_MODULE_NAME,
+	},
+};
+module_platform_driver(bcm63xx_udc_driver);
+
+MODULE_DESCRIPTION("BCM63xx USB Peripheral Controller");
+MODULE_AUTHOR("Kevin Cernekee <cernekee@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_MODULE_NAME);
diff --git a/drivers/usb/gadget/udc/bdc/Kconfig b/drivers/usb/gadget/udc/bdc/Kconfig
new file mode 100644
index 000000000..8bedb7f64
--- /dev/null
+++ b/drivers/usb/gadget/udc/bdc/Kconfig
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config USB_BDC_UDC
+	tristate "Broadcom USB3.0 device controller IP driver(BDC)"
+	depends on USB_GADGET && HAS_DMA
+	default ARCH_BRCMSTB
+
+	help
+	BDC is Broadcom's USB3.0 device controller IP. If your SOC has a BDC IP
+	then select this driver.
+
+	Say "y" here to link the driver statically, or "m" to build a dynamically
+	linked module called "bdc".
diff --git a/drivers/usb/gadget/udc/bdc/Makefile b/drivers/usb/gadget/udc/bdc/Makefile
new file mode 100644
index 000000000..1b21c9518
--- /dev/null
+++ b/drivers/usb/gadget/udc/bdc/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_USB_BDC_UDC)	+= bdc.o
+bdc-y	:= bdc_core.o bdc_cmd.o bdc_ep.o bdc_udc.o
+
+ifneq ($(CONFIG_USB_GADGET_VERBOSE),)
+	bdc-y			+= bdc_dbg.o
+endif
diff --git a/drivers/usb/gadget/udc/bdc/bdc.h b/drivers/usb/gadget/udc/bdc/bdc.h
new file mode 100644
index 000000000..8d00b1239
--- /dev/null
+++ b/drivers/usb/gadget/udc/bdc/bdc.h
@@ -0,0 +1,489 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * bdc.h - header for the BRCM BDC USB3.0 device controller
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * Author: Ashwini Pahuja
+ */
+
+#ifndef	__LINUX_BDC_H__
+#define	__LINUX_BDC_H__
+
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/debugfs.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <asm/unaligned.h>
+
+#define BRCM_BDC_NAME "bdc"
+#define BRCM_BDC_DESC "Broadcom USB Device Controller driver"
+
+#define DMA_ADDR_INVALID        (~(dma_addr_t)0)
+
+/* BDC command operation timeout in usec*/
+#define BDC_CMD_TIMEOUT	1000
+/* BDC controller operation timeout in usec*/
+#define BDC_COP_TIMEOUT	500
+
+/*
+ * Maximum size of ep0 response buffer for ch9 requests,
+ * the set_sel request uses 6 so far, the max.
+ */
+#define EP0_RESPONSE_BUFF  6
+/* Start with SS as default */
+#define EP0_MAX_PKT_SIZE 512
+
+/* 64 entries in a SRR */
+#define NUM_SR_ENTRIES	64
+
+/* Num of bds per table */
+#define NUM_BDS_PER_TABLE	64
+
+/* Num of tables in bd list for control,bulk and Int ep */
+#define NUM_TABLES	2
+
+/* Num of tables in bd list for Isoch ep */
+#define NUM_TABLES_ISOCH	6
+
+/* U1 Timeout default: 248usec */
+#define U1_TIMEOUT	0xf8
+
+/* Interrupt coalescence in usec */
+#define	INT_CLS	500
+
+/* Register offsets */
+/* Configuration and Capability registers */
+#define BDC_BDCCFG0	0x00
+#define BDC_BDCCFG1	0x04
+#define BDC_BDCCAP0	0x08
+#define BDC_BDCCAP1	0x0c
+#define BDC_CMDPAR0	0x10
+#define BDC_CMDPAR1	0x14
+#define BDC_CMDPAR2	0x18
+#define BDC_CMDSC	0x1c
+#define BDC_USPC	0x20
+#define BDC_USPPMS	0x28
+#define BDC_USPPM2	0x2c
+#define BDC_SPBBAL	0x38
+#define BDC_SPBBAH	0x3c
+#define BDC_BDCSC	0x40
+#define BDC_XSFNTF	0x4c
+
+#define BDC_DVCSA	0x50
+#define BDC_DVCSB	0x54
+#define BDC_EPSTS0	0x60
+#define BDC_EPSTS1	0x64
+#define BDC_EPSTS2	0x68
+#define BDC_EPSTS3	0x6c
+#define BDC_EPSTS4	0x70
+#define BDC_EPSTS5	0x74
+#define BDC_EPSTS6	0x78
+#define BDC_EPSTS7	0x7c
+#define BDC_SRRBAL(n)	(0x200 + ((n) * 0x10))
+#define BDC_SRRBAH(n)	(0x204 + ((n) * 0x10))
+#define BDC_SRRINT(n)	(0x208 + ((n) * 0x10))
+#define BDC_INTCTLS(n)	(0x20c + ((n) * 0x10))
+
+/* Extended capability regs */
+#define BDC_FSCNOC	0xcd4
+#define BDC_FSCNIC	0xce4
+#define NUM_NCS(p)	((p) >> 28)
+
+/* Register bit fields and Masks */
+/* BDC Configuration 0 */
+#define BDC_PGS(p)	(((p) & (0x7 << 8)) >> 8)
+#define BDC_SPB(p)	((p) & 0x7)
+
+/* BDC Capability1 */
+#define BDC_P64		BIT(0)
+
+/* BDC Command register */
+#define BDC_CMD_FH	0xe
+#define BDC_CMD_DNC	0x6
+#define BDC_CMD_EPO	0x4
+#define BDC_CMD_BLA	0x3
+#define BDC_CMD_EPC	0x2
+#define BDC_CMD_DVC	0x1
+#define BDC_CMD_CWS		BIT(5)
+#define BDC_CMD_CST(p)		(((p) & (0xf << 6))>>6)
+#define BDC_CMD_EPN(p)		(((p) & 0x1f) << 10)
+#define BDC_SUB_CMD_ADD		(0x1 << 17)
+#define BDC_SUB_CMD_FWK		(0x4 << 17)
+/* Reset sequence number */
+#define BDC_CMD_EPO_RST_SN	(0x1 << 16)
+#define BDC_CMD_EP0_XSD		(0x1 << 16)
+#define BDC_SUB_CMD_ADD_EP	(0x1 << 17)
+#define BDC_SUB_CMD_DRP_EP	(0x2 << 17)
+#define BDC_SUB_CMD_EP_STP	(0x2 << 17)
+#define BDC_SUB_CMD_EP_STL	(0x4 << 17)
+#define BDC_SUB_CMD_EP_RST	(0x1 << 17)
+#define BDC_CMD_SRD		BIT(27)
+
+/* CMD completion status */
+#define BDC_CMDS_SUCC	0x1
+#define BDC_CMDS_PARA	0x3
+#define BDC_CMDS_STAT	0x4
+#define BDC_CMDS_FAIL	0x5
+#define BDC_CMDS_INTL	0x6
+#define BDC_CMDS_BUSY	0xf
+
+/* CMDSC Param 2 shifts */
+#define EPT_SHIFT	22
+#define MP_SHIFT	10
+#define MB_SHIFT	6
+#define EPM_SHIFT	4
+
+/* BDC USPSC */
+#define BDC_VBC		BIT(31)
+#define BDC_PRC		BIT(30)
+#define BDC_PCE		BIT(29)
+#define BDC_CFC		BIT(28)
+#define BDC_PCC		BIT(27)
+#define BDC_PSC		BIT(26)
+#define BDC_VBS		BIT(25)
+#define BDC_PRS		BIT(24)
+#define BDC_PCS		BIT(23)
+#define BDC_PSP(p)	(((p) & (0x7 << 20))>>20)
+#define BDC_SCN		BIT(8)
+#define BDC_SDC		BIT(7)
+#define BDC_SWS		BIT(4)
+
+#define BDC_USPSC_RW	(BDC_SCN|BDC_SDC|BDC_SWS|0xf)
+#define BDC_PSP(p)	(((p) & (0x7 << 20))>>20)
+
+#define BDC_SPEED_FS	0x1
+#define BDC_SPEED_LS	0x2
+#define BDC_SPEED_HS	0x3
+#define BDC_SPEED_SS	0x4
+
+#define BDC_PST(p)	((p) & 0xf)
+#define BDC_PST_MASK	0xf
+
+/* USPPMS */
+#define BDC_U2E		BIT(31)
+#define BDC_U1E		BIT(30)
+#define BDC_U2A		BIT(29)
+#define BDC_PORT_W1S	BIT(17)
+#define BDC_U1T(p)	((p) & 0xff)
+#define BDC_U2T(p)	(((p) & 0xff) << 8)
+#define BDC_U1T_MASK	0xff
+
+/* USBPM2 */
+/* Hardware LPM Enable */
+#define BDC_HLE		BIT(16)
+
+/* BDC Status and Control */
+#define BDC_COP_RST	(1 << 29)
+#define BDC_COP_RUN	(2 << 29)
+#define BDC_COP_STP	(4 << 29)
+
+#define BDC_COP_MASK (BDC_COP_RST|BDC_COP_RUN|BDC_COP_STP)
+
+#define BDC_COS		BIT(28)
+#define BDC_CSTS(p)	(((p) & (0x7 << 20)) >> 20)
+#define BDC_MASK_MCW	BIT(7)
+#define BDC_GIE		BIT(1)
+#define BDC_GIP		BIT(0)
+
+#define BDC_HLT	1
+#define BDC_NOR	2
+#define BDC_OIP	7
+
+/* Buffer descriptor and Status report bit fields and masks */
+#define BD_TYPE_BITMASK	(0xf)
+#define BD_CHAIN	0xf
+
+#define BD_TFS_SHIFT	4
+#define BD_SOT		BIT(26)
+#define BD_EOT		BIT(27)
+#define BD_ISP		BIT(29)
+#define BD_IOC		BIT(30)
+#define BD_SBF		BIT(31)
+
+#define BD_INTR_TARGET(p)	(((p) & 0x1f) << 27)
+
+#define BDC_SRR_RWS		BIT(4)
+#define BDC_SRR_RST		BIT(3)
+#define BDC_SRR_ISR		BIT(2)
+#define BDC_SRR_IE		BIT(1)
+#define BDC_SRR_IP		BIT(0)
+#define BDC_SRR_EPI(p)	(((p) & (0xff << 24)) >> 24)
+#define BDC_SRR_DPI(p) (((p) & (0xff << 16)) >> 16)
+#define BDC_SRR_DPI_MASK	0x00ff0000
+
+#define MARK_CHAIN_BD	(BD_CHAIN|BD_EOT|BD_SOT)
+
+/* Control transfer BD specific fields */
+#define BD_DIR_IN		BIT(25)
+
+#define BDC_PTC_MASK	0xf0000000
+
+/* status report defines */
+#define SR_XSF		0
+#define SR_USPC		4
+#define SR_BD_LEN(p)    ((p) & 0xffffff)
+
+#define XSF_SUCC	0x1
+#define XSF_SHORT	0x3
+#define XSF_BABB	0x4
+#define XSF_SETUP_RECV	0x6
+#define XSF_DATA_START	0x7
+#define XSF_STATUS_START 0x8
+
+#define XSF_STS(p) (((p) >> 28) & 0xf)
+
+/* Transfer BD fields */
+#define BD_LEN(p) ((p) & 0x1ffff)
+#define BD_LTF		BIT(25)
+#define BD_TYPE_DS	0x1
+#define BD_TYPE_SS	0x2
+
+#define BDC_EP_ENABLED     BIT(0)
+#define BDC_EP_STALL       BIT(1)
+#define BDC_EP_STOP        BIT(2)
+
+/* One BD can transfer max 65536 bytes */
+#define BD_MAX_BUFF_SIZE	(1 << 16)
+/* Maximum bytes in one XFR, Refer to BDC spec */
+#define MAX_XFR_LEN		16777215
+
+/* defines for Force Header command */
+#define DEV_NOTF_TYPE 6
+#define FWK_SUBTYPE  1
+#define TRA_PACKET   4
+
+#define to_bdc_ep(e)		container_of(e, struct bdc_ep, usb_ep)
+#define to_bdc_req(r)		container_of(r, struct bdc_req, usb_req)
+#define gadget_to_bdc(g)	container_of(g, struct bdc, gadget)
+
+/* FUNCTION WAKE DEV NOTIFICATION interval, USB3 spec table 8.13 */
+#define BDC_TNOTIFY 2500 /*in ms*/
+/* Devstatus bitfields */
+#define REMOTE_WAKEUP_ISSUED	BIT(16)
+#define DEVICE_SUSPENDED	BIT(17)
+#define FUNC_WAKE_ISSUED	BIT(18)
+#define REMOTE_WAKE_ENABLE	(1 << USB_DEVICE_REMOTE_WAKEUP)
+
+/* On disconnect, preserve these bits and clear rest */
+#define DEVSTATUS_CLEAR		(1 << USB_DEVICE_SELF_POWERED)
+/* Hardware and software Data structures */
+
+/* Endpoint bd: buffer descriptor */
+struct bdc_bd {
+	__le32 offset[4];
+};
+
+/* Status report in Status report ring(srr) */
+struct bdc_sr {
+	__le32 offset[4];
+};
+
+/* bd_table: contiguous bd's in a table */
+struct bd_table {
+	struct bdc_bd *start_bd;
+	/* dma address of start bd of table*/
+	dma_addr_t dma;
+};
+
+/*
+ * Each endpoint has a bdl(buffer descriptor list), bdl consists of 1 or more bd
+ * table's chained to each other through a chain bd, every table has equal
+ * number of bds. the software uses bdi(bd index) to refer to particular bd in
+ * the list.
+ */
+struct bd_list {
+	/* Array of bd table pointers*/
+	struct bd_table **bd_table_array;
+	/* How many tables chained to each other */
+	int num_tabs;
+	/* Max_bdi = num_tabs * num_bds_table - 1 */
+	int max_bdi;
+	/* current enq bdi from sw point of view */
+	int eqp_bdi;
+	/* current deq bdi from sw point of view */
+	int hwd_bdi;
+	/* numbers of bds per table */
+	int num_bds_table;
+};
+
+struct bdc_req;
+
+/* Representation of a transfer, one transfer can have multiple bd's */
+struct bd_transfer {
+	struct bdc_req *req;
+	/* start bd index */
+	int start_bdi;
+	/* this will be the next hw dqp when this transfer completes */
+	int next_hwd_bdi;
+	/* number of bds in this transfer */
+	int num_bds;
+};
+
+/*
+ * Representation of a gadget request, every gadget request is contained
+ * by 1 bd_transfer.
+ */
+struct bdc_req {
+	struct usb_request	usb_req;
+	struct list_head	queue;
+	struct bdc_ep		*ep;
+	/* only one Transfer per request */
+	struct bd_transfer bd_xfr;
+	int	epnum;
+};
+
+/* scratchpad buffer needed by bdc hardware */
+struct bdc_scratchpad {
+	dma_addr_t sp_dma;
+	void *buff;
+	u32 size;
+};
+
+/* endpoint representation */
+struct bdc_ep {
+	struct usb_ep	usb_ep;
+	struct list_head queue;
+	struct bdc *bdc;
+	u8  ep_type;
+	u8  dir;
+	u8  ep_num;
+	const struct usb_ss_ep_comp_descriptor	*comp_desc;
+	const struct usb_endpoint_descriptor	*desc;
+	unsigned int flags;
+	char name[20];
+	/* endpoint bd list*/
+	struct bd_list bd_list;
+	/*
+	 * HW generates extra event for multi bd tranfers, this flag helps in
+	 * ignoring the extra event
+	 */
+	bool ignore_next_sr;
+};
+
+/* bdc cmmand parameter structure */
+struct bdc_cmd_params {
+	u32	param2;
+	u32	param1;
+	u32	param0;
+};
+
+/* status report ring(srr), currently one srr is supported for entire system */
+struct srr {
+	struct bdc_sr *sr_bds;
+	u16	eqp_index;
+	u16	dqp_index;
+	dma_addr_t	dma_addr;
+};
+
+/* EP0 states */
+enum bdc_ep0_state {
+	WAIT_FOR_SETUP = 0,
+	WAIT_FOR_DATA_START,
+	WAIT_FOR_DATA_XMIT,
+	WAIT_FOR_STATUS_START,
+	WAIT_FOR_STATUS_XMIT,
+	STATUS_PENDING
+};
+
+/* Link states */
+enum bdc_link_state {
+	BDC_LINK_STATE_U0	= 0x00,
+	BDC_LINK_STATE_U3	= 0x03,
+	BDC_LINK_STATE_RX_DET	= 0x05,
+	BDC_LINK_STATE_RESUME	= 0x0f
+};
+
+/* representation of bdc */
+struct bdc {
+	struct usb_gadget	gadget;
+	struct usb_gadget_driver	*gadget_driver;
+	struct device	*dev;
+	/* device lock */
+	spinlock_t	lock;
+
+	/* generic phy */
+	struct phy      **phys;
+	int num_phys;
+	/* num of endpoints for a particular instantiation of IP */
+	unsigned int num_eps;
+	/*
+	 * Array of ep's, it uses the same index covention as bdc hw i.e.
+	 * 1 for ep0, 2 for 1out,3 for 1in ....
+	 */
+	struct bdc_ep		**bdc_ep_array;
+	void __iomem		*regs;
+	struct bdc_scratchpad	scratchpad;
+	u32	sp_buff_size;
+	/* current driver supports 1 status ring */
+	struct srr	srr;
+	/* Last received setup packet */
+	struct	usb_ctrlrequest setup_pkt;
+	struct	bdc_req ep0_req;
+	struct	bdc_req status_req;
+	enum	bdc_ep0_state ep0_state;
+	bool	delayed_status;
+	bool	zlp_needed;
+	bool	reinit;
+	bool	pullup;
+	/* Bits 0-15 are standard and 16-31 for proprietary information */
+	u32	devstatus;
+	int	irq;
+	void	*mem;
+	u32	dev_addr;
+	/* DMA pools */
+	struct dma_pool	*bd_table_pool;
+	u8		test_mode;
+	/* array of callbacks for various status report handlers */
+	void (*sr_handler[2])(struct bdc *, struct bdc_sr *);
+	/* ep0 callback handlers */
+	void (*sr_xsf_ep0[3])(struct bdc *, struct bdc_sr *);
+	/* ep0 response buffer for ch9 requests like GET_STATUS and SET_SEL */
+	unsigned char		ep0_response_buff[EP0_RESPONSE_BUFF];
+	/*
+	 * Timer to check if host resumed transfer after bdc sent Func wake
+	 * notification  packet after a remote wakeup. if not, then resend the
+	 * Func Wake packet every 2.5 secs. Refer to USB3 spec section 8.5.6.4
+	 */
+	struct delayed_work	func_wake_notify;
+	struct clk		*clk;
+};
+
+static inline u32 bdc_readl(void __iomem *base, u32 offset)
+{
+	return readl(base + offset);
+}
+
+static inline void bdc_writel(void __iomem *base, u32 offset, u32 value)
+{
+	writel(value, base + offset);
+}
+
+/* Buffer descriptor list operations */
+void bdc_notify_xfr(struct bdc *bdc, u32 epnum);
+void bdc_softconn(struct bdc *bdc);
+void bdc_softdisconn(struct bdc *bdc);
+int bdc_run(struct bdc *bdc);
+int bdc_stop(struct bdc *bdc);
+int bdc_reset(struct bdc *bdc);
+int bdc_udc_init(struct bdc *bdc);
+void bdc_udc_exit(struct bdc *bdc);
+int bdc_reinit(struct bdc *bdc);
+
+/* Status report handlers */
+/* Upstream port status change sr */
+void bdc_sr_uspc(struct bdc *bdc, struct bdc_sr *sreport);
+/* transfer sr */
+void bdc_sr_xsf(struct bdc *bdc, struct bdc_sr *sreport);
+/* EP0 XSF handlers */
+void bdc_xsf_ep0_setup_recv(struct bdc *bdc, struct bdc_sr *sreport);
+void bdc_xsf_ep0_data_start(struct bdc *bdc, struct bdc_sr *sreport);
+void bdc_xsf_ep0_status_start(struct bdc *bdc, struct bdc_sr *sreport);
+
+#endif /* __LINUX_BDC_H__ */
diff --git a/drivers/usb/gadget/udc/bdc/bdc_cmd.c b/drivers/usb/gadget/udc/bdc/bdc_cmd.c
new file mode 100644
index 000000000..1848ced07
--- /dev/null
+++ b/drivers/usb/gadget/udc/bdc/bdc_cmd.c
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * bdc_cmd.c - BRCM BDC USB3.0 device controller
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * Author: Ashwini Pahuja
+ */
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+
+#include "bdc.h"
+#include "bdc_cmd.h"
+#include "bdc_dbg.h"
+
+/* Issues a cmd to cmd processor and waits for cmd completion */
+static int bdc_issue_cmd(struct bdc *bdc, u32 cmd_sc, u32 param0,
+							u32 param1, u32 param2)
+{
+	u32 timeout = BDC_CMD_TIMEOUT;
+	u32 cmd_status;
+	u32 temp;
+
+	bdc_writel(bdc->regs, BDC_CMDPAR0, param0);
+	bdc_writel(bdc->regs, BDC_CMDPAR1, param1);
+	bdc_writel(bdc->regs, BDC_CMDPAR2, param2);
+
+	/* Issue the cmd */
+	/* Make sure the cmd params are written before asking HW to exec cmd */
+	wmb();
+	bdc_writel(bdc->regs, BDC_CMDSC, cmd_sc | BDC_CMD_CWS | BDC_CMD_SRD);
+	do {
+		temp = bdc_readl(bdc->regs, BDC_CMDSC);
+		dev_dbg_ratelimited(bdc->dev, "cmdsc=%x", temp);
+		cmd_status =  BDC_CMD_CST(temp);
+		if (cmd_status != BDC_CMDS_BUSY)  {
+			dev_dbg(bdc->dev,
+				"command completed cmd_sts:%x\n", cmd_status);
+			return cmd_status;
+		}
+		udelay(1);
+	} while (timeout--);
+
+	dev_err(bdc->dev,
+		"command operation timedout cmd_status=%d\n", cmd_status);
+
+	return cmd_status;
+}
+
+/* Submits cmd and analyze the return value of bdc_issue_cmd */
+static int bdc_submit_cmd(struct bdc *bdc, u32 cmd_sc,
+					u32 param0, u32 param1,	u32 param2)
+{
+	u32 temp, cmd_status;
+	int ret;
+
+	temp = bdc_readl(bdc->regs, BDC_CMDSC);
+	dev_dbg(bdc->dev,
+		"%s:CMDSC:%08x cmdsc:%08x param0=%08x param1=%08x param2=%08x\n",
+		 __func__, temp, cmd_sc, param0, param1, param2);
+
+	cmd_status = BDC_CMD_CST(temp);
+	if (cmd_status  ==  BDC_CMDS_BUSY) {
+		dev_err(bdc->dev, "command processor busy: %x\n", cmd_status);
+		return -EBUSY;
+	}
+	ret = bdc_issue_cmd(bdc, cmd_sc, param0, param1, param2);
+	switch (ret) {
+	case BDC_CMDS_SUCC:
+		dev_dbg(bdc->dev, "command completed successfully\n");
+		ret = 0;
+		break;
+
+	case BDC_CMDS_PARA:
+		dev_err(bdc->dev, "command parameter error\n");
+		ret = -EINVAL;
+		break;
+
+	case BDC_CMDS_STAT:
+		dev_err(bdc->dev, "Invalid device/ep state\n");
+		ret = -EINVAL;
+		break;
+
+	case BDC_CMDS_FAIL:
+		dev_err(bdc->dev, "Command failed?\n");
+		ret = -EAGAIN;
+		break;
+
+	case BDC_CMDS_INTL:
+		dev_err(bdc->dev, "BDC Internal error\n");
+		ret = -ECONNRESET;
+		break;
+
+	case BDC_CMDS_BUSY:
+		dev_err(bdc->dev,
+			"command timedout waited for %dusec\n",
+			BDC_CMD_TIMEOUT);
+		ret = -ECONNRESET;
+		break;
+	default:
+		dev_dbg(bdc->dev, "Unknown command completion code:%x\n", ret);
+	}
+
+	return ret;
+}
+
+/* Deconfigure the endpoint from HW */
+int bdc_dconfig_ep(struct bdc *bdc, struct bdc_ep *ep)
+{
+	u32 cmd_sc;
+
+	cmd_sc = BDC_SUB_CMD_DRP_EP|BDC_CMD_EPN(ep->ep_num)|BDC_CMD_EPC;
+	dev_dbg(bdc->dev, "%s ep->ep_num =%d cmd_sc=%x\n", __func__,
+							ep->ep_num, cmd_sc);
+
+	return bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0);
+}
+
+/* Reinitalize the bdlist after config ep command */
+static void ep_bd_list_reinit(struct bdc_ep *ep)
+{
+	struct bdc *bdc = ep->bdc;
+	struct bdc_bd *bd;
+
+	ep->bd_list.eqp_bdi = 0;
+	ep->bd_list.hwd_bdi = 0;
+	bd = ep->bd_list.bd_table_array[0]->start_bd;
+	dev_dbg(bdc->dev, "%s ep:%p bd:%p\n", __func__, ep, bd);
+	memset(bd, 0, sizeof(struct bdc_bd));
+	bd->offset[3] |= cpu_to_le32(BD_SBF);
+}
+
+/* Configure an endpoint */
+int bdc_config_ep(struct bdc *bdc, struct bdc_ep *ep)
+{
+	const struct usb_ss_ep_comp_descriptor *comp_desc;
+	const struct usb_endpoint_descriptor	*desc;
+	u32 param0, param1, param2, cmd_sc;
+	u32 mps, mbs, mul, si;
+	int ret;
+
+	desc = ep->desc;
+	comp_desc = ep->comp_desc;
+	cmd_sc = mul = mbs = param2 = 0;
+	param0 = lower_32_bits(ep->bd_list.bd_table_array[0]->dma);
+	param1 = upper_32_bits(ep->bd_list.bd_table_array[0]->dma);
+	cpu_to_le32s(&param0);
+	cpu_to_le32s(&param1);
+
+	dev_dbg(bdc->dev, "%s: param0=%08x param1=%08x",
+						__func__, param0, param1);
+	si = desc->bInterval;
+	si = clamp_val(si, 1, 16) - 1;
+
+	mps = usb_endpoint_maxp(desc);
+	param2 |= mps << MP_SHIFT;
+	param2 |= usb_endpoint_type(desc) << EPT_SHIFT;
+
+	switch (bdc->gadget.speed) {
+	case USB_SPEED_SUPER:
+		if (usb_endpoint_xfer_int(desc) ||
+					usb_endpoint_xfer_isoc(desc)) {
+			param2 |= si;
+			if (usb_endpoint_xfer_isoc(desc) && comp_desc)
+				mul = comp_desc->bmAttributes;
+
+		}
+		param2 |= mul << EPM_SHIFT;
+		if (comp_desc)
+			mbs = comp_desc->bMaxBurst;
+		param2 |= mbs << MB_SHIFT;
+		break;
+
+	case USB_SPEED_HIGH:
+		if (usb_endpoint_xfer_isoc(desc) ||
+					usb_endpoint_xfer_int(desc)) {
+			param2 |= si;
+
+			mbs = usb_endpoint_maxp_mult(desc);
+			param2 |= mbs << MB_SHIFT;
+		}
+		break;
+
+	case USB_SPEED_FULL:
+	case USB_SPEED_LOW:
+		/* the hardware accepts SI in 125usec range */
+		if (usb_endpoint_xfer_isoc(desc))
+			si += 3;
+
+		/*
+		 * FS Int endpoints can have si of 1-255ms but the controller
+		 * accepts 2^bInterval*125usec, so convert ms to nearest power
+		 * of 2
+		 */
+		if (usb_endpoint_xfer_int(desc))
+			si = fls(desc->bInterval * 8) - 1;
+
+		param2 |= si;
+		break;
+	default:
+		dev_err(bdc->dev, "UNKNOWN speed ERR\n");
+		return -EINVAL;
+	}
+
+	cmd_sc |= BDC_CMD_EPC|BDC_CMD_EPN(ep->ep_num)|BDC_SUB_CMD_ADD_EP;
+
+	dev_dbg(bdc->dev, "cmd_sc=%x param2=%08x\n", cmd_sc, param2);
+	ret = bdc_submit_cmd(bdc, cmd_sc, param0, param1, param2);
+	if (ret) {
+		dev_err(bdc->dev, "command failed :%x\n", ret);
+		return ret;
+	}
+	ep_bd_list_reinit(ep);
+
+	return ret;
+}
+
+/*
+ * Change the HW deq pointer, if this command is successful, HW will start
+ * fetching the next bd from address dma_addr.
+ */
+int bdc_ep_bla(struct bdc *bdc, struct bdc_ep *ep, dma_addr_t dma_addr)
+{
+	u32 param0, param1;
+	u32 cmd_sc = 0;
+
+	dev_dbg(bdc->dev, "%s: add=%08llx\n", __func__,
+				(unsigned long long)(dma_addr));
+	param0 = lower_32_bits(dma_addr);
+	param1 = upper_32_bits(dma_addr);
+	cpu_to_le32s(&param0);
+	cpu_to_le32s(&param1);
+
+	cmd_sc |= BDC_CMD_EPN(ep->ep_num)|BDC_CMD_BLA;
+	dev_dbg(bdc->dev, "cmd_sc=%x\n", cmd_sc);
+
+	return bdc_submit_cmd(bdc, cmd_sc, param0, param1, 0);
+}
+
+/* Set the address sent bu Host in SET_ADD request */
+int bdc_address_device(struct bdc *bdc, u32 add)
+{
+	u32 cmd_sc = 0;
+	u32 param2;
+
+	dev_dbg(bdc->dev, "%s: add=%d\n", __func__, add);
+	cmd_sc |=  BDC_SUB_CMD_ADD|BDC_CMD_DVC;
+	param2 = add & 0x7f;
+
+	return bdc_submit_cmd(bdc, cmd_sc, 0, 0, param2);
+}
+
+/* Send a Function Wake notification packet using FH command */
+int bdc_function_wake_fh(struct bdc *bdc, u8 intf)
+{
+	u32 param0, param1;
+	u32 cmd_sc = 0;
+
+	param0 = param1 = 0;
+	dev_dbg(bdc->dev, "%s intf=%d\n", __func__, intf);
+	cmd_sc  |=  BDC_CMD_FH;
+	param0 |= TRA_PACKET;
+	param0 |= (bdc->dev_addr << 25);
+	param1 |= DEV_NOTF_TYPE;
+	param1 |= (FWK_SUBTYPE<<4);
+	dev_dbg(bdc->dev, "param0=%08x param1=%08x\n", param0, param1);
+
+	return bdc_submit_cmd(bdc, cmd_sc, param0, param1, 0);
+}
+
+/* Send a Function Wake notification packet using DNC command */
+int bdc_function_wake(struct bdc *bdc, u8 intf)
+{
+	u32 cmd_sc = 0;
+	u32 param2 = 0;
+
+	dev_dbg(bdc->dev, "%s intf=%d", __func__, intf);
+	param2 |= intf;
+	cmd_sc |= BDC_SUB_CMD_FWK|BDC_CMD_DNC;
+
+	return bdc_submit_cmd(bdc, cmd_sc, 0, 0, param2);
+}
+
+/* Stall the endpoint */
+int bdc_ep_set_stall(struct bdc *bdc, int epnum)
+{
+	u32 cmd_sc = 0;
+
+	dev_dbg(bdc->dev, "%s epnum=%d\n", __func__, epnum);
+	/* issue a stall endpoint command */
+	cmd_sc |=  BDC_SUB_CMD_EP_STL | BDC_CMD_EPN(epnum) | BDC_CMD_EPO;
+
+	return bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0);
+}
+
+/* resets the endpoint, called when host sends CLEAR_FEATURE(HALT) */
+int bdc_ep_clear_stall(struct bdc *bdc, int epnum)
+{
+	struct bdc_ep *ep;
+	u32 cmd_sc = 0;
+	int ret;
+
+	dev_dbg(bdc->dev, "%s: epnum=%d\n", __func__, epnum);
+	ep = bdc->bdc_ep_array[epnum];
+	/*
+	 * If we are not in stalled then stall Endpoint and issue clear stall,
+	 * his will reset the seq number for non EP0.
+	 */
+	if (epnum != 1) {
+		/* if the endpoint it not stalled */
+		if (!(ep->flags & BDC_EP_STALL)) {
+			ret = bdc_ep_set_stall(bdc, epnum);
+			if (ret)
+				return ret;
+		}
+	}
+	/* Preserve the seq number for ep0 only */
+	if (epnum != 1)
+		cmd_sc |= BDC_CMD_EPO_RST_SN;
+
+	/* issue a reset endpoint command */
+	cmd_sc |=  BDC_SUB_CMD_EP_RST | BDC_CMD_EPN(epnum) | BDC_CMD_EPO;
+
+	ret = bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0);
+	if (ret) {
+		dev_err(bdc->dev, "command failed:%x\n", ret);
+		return ret;
+	}
+	bdc_notify_xfr(bdc, epnum);
+
+	return ret;
+}
+
+/* Stop the endpoint, called when software wants to dequeue some request */
+int bdc_stop_ep(struct bdc *bdc, int epnum)
+{
+	struct bdc_ep *ep;
+	u32 cmd_sc = 0;
+	int ret;
+
+	ep = bdc->bdc_ep_array[epnum];
+	dev_dbg(bdc->dev, "%s: ep:%s ep->flags:%08x\n", __func__,
+						ep->name, ep->flags);
+	/* Endpoint has to be in running state to execute stop ep command */
+	if (!(ep->flags & BDC_EP_ENABLED)) {
+		dev_err(bdc->dev, "stop endpoint called for disabled ep\n");
+		return   -EINVAL;
+	}
+	if ((ep->flags & BDC_EP_STALL) || (ep->flags & BDC_EP_STOP))
+		return 0;
+
+	/* issue a stop endpoint command */
+	cmd_sc |= BDC_CMD_EP0_XSD | BDC_SUB_CMD_EP_STP
+				| BDC_CMD_EPN(epnum) | BDC_CMD_EPO;
+
+	ret = bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0);
+	if (ret) {
+		dev_err(bdc->dev,
+			"stop endpoint command didn't complete:%d ep:%s\n",
+			ret, ep->name);
+		return ret;
+	}
+	ep->flags |= BDC_EP_STOP;
+	bdc_dump_epsts(bdc);
+
+	return ret;
+}
diff --git a/drivers/usb/gadget/udc/bdc/bdc_cmd.h b/drivers/usb/gadget/udc/bdc/bdc_cmd.h
new file mode 100644
index 000000000..533ad52fa
--- /dev/null
+++ b/drivers/usb/gadget/udc/bdc/bdc_cmd.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * bdc_cmd.h - header for the BDC debug functions
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * Author: Ashwini Pahuja
+ */
+#ifndef __LINUX_BDC_CMD_H__
+#define __LINUX_BDC_CMD_H__
+
+/* Command operations */
+int bdc_address_device(struct bdc *bdc, u32 add);
+int bdc_config_ep(struct bdc *bdc, struct bdc_ep *ep);
+int bdc_dconfig_ep(struct bdc *bdc, struct bdc_ep *ep);
+int bdc_stop_ep(struct bdc *bdc, int epnum);
+int bdc_ep_set_stall(struct bdc *bdc, int epnum);
+int bdc_ep_clear_stall(struct bdc *bdc, int epnum);
+int bdc_ep_bla(struct bdc *bdc, struct bdc_ep *ep, dma_addr_t dma_addr);
+int bdc_function_wake(struct bdc *bdc, u8 intf);
+int bdc_function_wake_fh(struct bdc *bdc, u8 intf);
+
+#endif /* __LINUX_BDC_CMD_H__ */
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
new file mode 100644
index 000000000..9849e0c86
--- /dev/null
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -0,0 +1,657 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * bdc_core.c - BRCM BDC USB3.0 device controller core operations
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * Author: Ashwini Pahuja
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/moduleparam.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/clk.h>
+
+#include "bdc.h"
+#include "bdc_dbg.h"
+
+/* Poll till controller status is not OIP */
+static int poll_oip(struct bdc *bdc, u32 usec)
+{
+	u32 status;
+	int ret;
+
+	ret = readl_poll_timeout(bdc->regs + BDC_BDCSC, status,
+				 (BDC_CSTS(status) != BDC_OIP), 10, usec);
+	if (ret)
+		dev_err(bdc->dev, "operation timedout BDCSC: 0x%08x\n", status);
+	else
+		dev_dbg(bdc->dev, "%s complete status=%d", __func__, BDC_CSTS(status));
+
+	return ret;
+}
+
+/* Stop the BDC controller */
+int bdc_stop(struct bdc *bdc)
+{
+	int ret;
+	u32 temp;
+
+	dev_dbg(bdc->dev, "%s ()\n\n", __func__);
+	temp = bdc_readl(bdc->regs, BDC_BDCSC);
+	/* Check if BDC is already halted */
+	if (BDC_CSTS(temp) == BDC_HLT) {
+		dev_vdbg(bdc->dev, "BDC already halted\n");
+		return 0;
+	}
+	temp &= ~BDC_COP_MASK;
+	temp |= BDC_COS|BDC_COP_STP;
+	bdc_writel(bdc->regs, BDC_BDCSC, temp);
+
+	ret = poll_oip(bdc, BDC_COP_TIMEOUT);
+	if (ret)
+		dev_err(bdc->dev, "bdc stop operation failed");
+
+	return ret;
+}
+
+/* Issue a reset to BDC controller */
+int bdc_reset(struct bdc *bdc)
+{
+	u32 temp;
+	int ret;
+
+	dev_dbg(bdc->dev, "%s ()\n", __func__);
+	/* First halt the controller */
+	ret = bdc_stop(bdc);
+	if (ret)
+		return ret;
+
+	temp = bdc_readl(bdc->regs, BDC_BDCSC);
+	temp &= ~BDC_COP_MASK;
+	temp |= BDC_COS|BDC_COP_RST;
+	bdc_writel(bdc->regs, BDC_BDCSC, temp);
+	ret = poll_oip(bdc, BDC_COP_TIMEOUT);
+	if (ret)
+		dev_err(bdc->dev, "bdc reset operation failed");
+
+	return ret;
+}
+
+/* Run the BDC controller */
+int bdc_run(struct bdc *bdc)
+{
+	u32 temp;
+	int ret;
+
+	dev_dbg(bdc->dev, "%s ()\n", __func__);
+	temp = bdc_readl(bdc->regs, BDC_BDCSC);
+	/* if BDC is already in running state then do not do anything */
+	if (BDC_CSTS(temp) == BDC_NOR) {
+		dev_warn(bdc->dev, "bdc is already in running state\n");
+		return 0;
+	}
+	temp &= ~BDC_COP_MASK;
+	temp |= BDC_COP_RUN;
+	temp |= BDC_COS;
+	bdc_writel(bdc->regs, BDC_BDCSC, temp);
+	ret = poll_oip(bdc, BDC_COP_TIMEOUT);
+	if (ret) {
+		dev_err(bdc->dev, "bdc run operation failed:%d", ret);
+		return ret;
+	}
+	temp = bdc_readl(bdc->regs, BDC_BDCSC);
+	if (BDC_CSTS(temp) != BDC_NOR) {
+		dev_err(bdc->dev, "bdc not in normal mode after RUN op :%d\n",
+								BDC_CSTS(temp));
+		return -ESHUTDOWN;
+	}
+
+	return 0;
+}
+
+/*
+ * Present the termination to the host, typically called from upstream port
+ * event with Vbus present =1
+ */
+void bdc_softconn(struct bdc *bdc)
+{
+	u32 uspc;
+
+	uspc = bdc_readl(bdc->regs, BDC_USPC);
+	uspc &= ~BDC_PST_MASK;
+	uspc |= BDC_LINK_STATE_RX_DET;
+	uspc |= BDC_SWS;
+	dev_dbg(bdc->dev, "%s () uspc=%08x\n", __func__, uspc);
+	bdc_writel(bdc->regs, BDC_USPC, uspc);
+}
+
+/* Remove the termination */
+void bdc_softdisconn(struct bdc *bdc)
+{
+	u32 uspc;
+
+	uspc = bdc_readl(bdc->regs, BDC_USPC);
+	uspc |= BDC_SDC;
+	uspc &= ~BDC_SCN;
+	dev_dbg(bdc->dev, "%s () uspc=%x\n", __func__, uspc);
+	bdc_writel(bdc->regs, BDC_USPC, uspc);
+}
+
+/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */
+static int scratchpad_setup(struct bdc *bdc)
+{
+	int sp_buff_size;
+	u32 low32;
+	u32 upp32;
+
+	sp_buff_size = BDC_SPB(bdc_readl(bdc->regs, BDC_BDCCFG0));
+	dev_dbg(bdc->dev, "%s() sp_buff_size=%d\n", __func__, sp_buff_size);
+	if (!sp_buff_size) {
+		dev_dbg(bdc->dev, "Scratchpad buffer not needed\n");
+		return 0;
+	}
+	/* Refer to BDC spec, Table 4 for description of SPB */
+	sp_buff_size = 1 << (sp_buff_size + 5);
+	dev_dbg(bdc->dev, "Allocating %d bytes for scratchpad\n", sp_buff_size);
+	bdc->scratchpad.buff  =  dma_alloc_coherent(bdc->dev, sp_buff_size,
+						    &bdc->scratchpad.sp_dma,
+						    GFP_KERNEL);
+
+	if (!bdc->scratchpad.buff)
+		goto fail;
+
+	bdc->sp_buff_size = sp_buff_size;
+	bdc->scratchpad.size = sp_buff_size;
+	low32 = lower_32_bits(bdc->scratchpad.sp_dma);
+	upp32 = upper_32_bits(bdc->scratchpad.sp_dma);
+	cpu_to_le32s(&low32);
+	cpu_to_le32s(&upp32);
+	bdc_writel(bdc->regs, BDC_SPBBAL, low32);
+	bdc_writel(bdc->regs, BDC_SPBBAH, upp32);
+	return 0;
+
+fail:
+	bdc->scratchpad.buff = NULL;
+
+	return -ENOMEM;
+}
+
+/* Allocate the status report ring */
+static int setup_srr(struct bdc *bdc, int interrupter)
+{
+	dev_dbg(bdc->dev, "%s() NUM_SR_ENTRIES:%d\n", __func__, NUM_SR_ENTRIES);
+	/* Reset the SRR */
+	bdc_writel(bdc->regs, BDC_SRRINT(0), BDC_SRR_RWS | BDC_SRR_RST);
+	bdc->srr.dqp_index = 0;
+	/* allocate the status report descriptors */
+	bdc->srr.sr_bds = dma_alloc_coherent(bdc->dev,
+					     NUM_SR_ENTRIES * sizeof(struct bdc_bd),
+					     &bdc->srr.dma_addr, GFP_KERNEL);
+	if (!bdc->srr.sr_bds)
+		return -ENOMEM;
+
+	return 0;
+}
+
+/* Initialize the HW regs and internal data structures */
+static void bdc_mem_init(struct bdc *bdc, bool reinit)
+{
+	u8 size = 0;
+	u32 usb2_pm;
+	u32 low32;
+	u32 upp32;
+	u32 temp;
+
+	dev_dbg(bdc->dev, "%s ()\n", __func__);
+	bdc->ep0_state = WAIT_FOR_SETUP;
+	bdc->dev_addr = 0;
+	bdc->srr.eqp_index = 0;
+	bdc->srr.dqp_index = 0;
+	bdc->zlp_needed = false;
+	bdc->delayed_status = false;
+
+	bdc_writel(bdc->regs, BDC_SPBBAL, bdc->scratchpad.sp_dma);
+	/* Init the SRR */
+	temp = BDC_SRR_RWS | BDC_SRR_RST;
+	/* Reset the SRR */
+	bdc_writel(bdc->regs, BDC_SRRINT(0), temp);
+	dev_dbg(bdc->dev, "bdc->srr.sr_bds =%p\n", bdc->srr.sr_bds);
+	temp = lower_32_bits(bdc->srr.dma_addr);
+	size = fls(NUM_SR_ENTRIES) - 2;
+	temp |= size;
+	dev_dbg(bdc->dev, "SRRBAL[0]=%08x NUM_SR_ENTRIES:%d size:%d\n",
+						temp, NUM_SR_ENTRIES, size);
+
+	low32 = lower_32_bits(temp);
+	upp32 = upper_32_bits(bdc->srr.dma_addr);
+	cpu_to_le32s(&low32);
+	cpu_to_le32s(&upp32);
+
+	/* Write the dma addresses into regs*/
+	bdc_writel(bdc->regs, BDC_SRRBAL(0), low32);
+	bdc_writel(bdc->regs, BDC_SRRBAH(0), upp32);
+
+	temp = bdc_readl(bdc->regs, BDC_SRRINT(0));
+	temp |= BDC_SRR_IE;
+	temp &= ~(BDC_SRR_RST | BDC_SRR_RWS);
+	bdc_writel(bdc->regs, BDC_SRRINT(0), temp);
+
+	/* Set the Interrupt Coalescence ~500 usec */
+	temp = bdc_readl(bdc->regs, BDC_INTCTLS(0));
+	temp &= ~0xffff;
+	temp |= INT_CLS;
+	bdc_writel(bdc->regs, BDC_INTCTLS(0), temp);
+
+	usb2_pm = bdc_readl(bdc->regs, BDC_USPPM2);
+	dev_dbg(bdc->dev, "usb2_pm=%08x", usb2_pm);
+	/* Enable hardware LPM Enable */
+	usb2_pm |= BDC_HLE;
+	bdc_writel(bdc->regs, BDC_USPPM2, usb2_pm);
+
+	/* readback for debug */
+	usb2_pm = bdc_readl(bdc->regs, BDC_USPPM2);
+	dev_dbg(bdc->dev, "usb2_pm=%08x\n", usb2_pm);
+
+	/* Disable any unwanted SR's on SRR */
+	temp = bdc_readl(bdc->regs, BDC_BDCSC);
+	/* We don't want Microframe counter wrap SR */
+	temp |= BDC_MASK_MCW;
+	bdc_writel(bdc->regs, BDC_BDCSC, temp);
+
+	/*
+	 * In some error cases, driver has to reset the entire BDC controller
+	 * in that case reinit is passed as 1
+	 */
+	if (reinit) {
+		int i;
+		/* Enable interrupts */
+		temp = bdc_readl(bdc->regs, BDC_BDCSC);
+		temp |= BDC_GIE;
+		bdc_writel(bdc->regs, BDC_BDCSC, temp);
+		/* Init scratchpad to 0 */
+		memset(bdc->scratchpad.buff, 0, bdc->sp_buff_size);
+		/* Initialize SRR to 0 */
+		memset(bdc->srr.sr_bds, 0,
+					NUM_SR_ENTRIES * sizeof(struct bdc_bd));
+		/*
+		 * clear ep flags to avoid post disconnect stops/deconfigs but
+		 * not during S2 exit
+		 */
+		if (!bdc->gadget.speed)
+			for (i = 1; i < bdc->num_eps; ++i)
+				bdc->bdc_ep_array[i]->flags = 0;
+	} else {
+		/* One time initiaization only */
+		/* Enable status report function pointers */
+		bdc->sr_handler[0] = bdc_sr_xsf;
+		bdc->sr_handler[1] = bdc_sr_uspc;
+
+		/* EP0 status report function pointers */
+		bdc->sr_xsf_ep0[0] = bdc_xsf_ep0_setup_recv;
+		bdc->sr_xsf_ep0[1] = bdc_xsf_ep0_data_start;
+		bdc->sr_xsf_ep0[2] = bdc_xsf_ep0_status_start;
+	}
+}
+
+/* Free the dynamic memory */
+static void bdc_mem_free(struct bdc *bdc)
+{
+	dev_dbg(bdc->dev, "%s\n", __func__);
+	/* Free SRR */
+	if (bdc->srr.sr_bds)
+		dma_free_coherent(bdc->dev,
+					NUM_SR_ENTRIES * sizeof(struct bdc_bd),
+					bdc->srr.sr_bds, bdc->srr.dma_addr);
+
+	/* Free scratchpad */
+	if (bdc->scratchpad.buff)
+		dma_free_coherent(bdc->dev, bdc->sp_buff_size,
+				bdc->scratchpad.buff, bdc->scratchpad.sp_dma);
+
+	/* Destroy the dma pools */
+	dma_pool_destroy(bdc->bd_table_pool);
+
+	/* Free the bdc_ep array */
+	kfree(bdc->bdc_ep_array);
+
+	bdc->srr.sr_bds = NULL;
+	bdc->scratchpad.buff = NULL;
+	bdc->bd_table_pool = NULL;
+	bdc->bdc_ep_array = NULL;
+}
+
+/*
+ * bdc reinit gives a controller reset and reinitialize the registers,
+ * called from disconnect/bus reset scenario's, to ensure proper HW cleanup
+ */
+int bdc_reinit(struct bdc *bdc)
+{
+	int ret;
+
+	dev_dbg(bdc->dev, "%s\n", __func__);
+	ret = bdc_stop(bdc);
+	if (ret)
+		goto out;
+
+	ret = bdc_reset(bdc);
+	if (ret)
+		goto out;
+
+	/* the reinit flag is 1 */
+	bdc_mem_init(bdc, true);
+	ret = bdc_run(bdc);
+out:
+	bdc->reinit = false;
+
+	return ret;
+}
+
+/* Allocate all the dyanmic memory */
+static int bdc_mem_alloc(struct bdc *bdc)
+{
+	u32 page_size;
+	unsigned int num_ieps, num_oeps;
+
+	dev_dbg(bdc->dev,
+		"%s() NUM_BDS_PER_TABLE:%d\n", __func__,
+		NUM_BDS_PER_TABLE);
+	page_size = BDC_PGS(bdc_readl(bdc->regs, BDC_BDCCFG0));
+	/* page size is 2^pgs KB */
+	page_size = 1 << page_size;
+	/* KB */
+	page_size <<= 10;
+	dev_dbg(bdc->dev, "page_size=%d\n", page_size);
+
+	/* Create a pool of bd tables */
+	bdc->bd_table_pool =
+	    dma_pool_create("BDC BD tables", bdc->dev, NUM_BDS_PER_TABLE * 16,
+								16, page_size);
+
+	if (!bdc->bd_table_pool)
+		goto fail;
+
+	if (scratchpad_setup(bdc))
+		goto fail;
+
+	/* read from regs */
+	num_ieps = NUM_NCS(bdc_readl(bdc->regs, BDC_FSCNIC));
+	num_oeps = NUM_NCS(bdc_readl(bdc->regs, BDC_FSCNOC));
+	/* +2: 1 for ep0 and the other is rsvd i.e. bdc_ep[0] is rsvd */
+	bdc->num_eps = num_ieps + num_oeps + 2;
+	dev_dbg(bdc->dev,
+		"ieps:%d eops:%d num_eps:%d\n",
+		num_ieps, num_oeps, bdc->num_eps);
+	/* allocate array of ep pointers */
+	bdc->bdc_ep_array = kcalloc(bdc->num_eps, sizeof(struct bdc_ep *),
+								GFP_KERNEL);
+	if (!bdc->bdc_ep_array)
+		goto fail;
+
+	dev_dbg(bdc->dev, "Allocating sr report0\n");
+	if (setup_srr(bdc, 0))
+		goto fail;
+
+	return 0;
+fail:
+	dev_warn(bdc->dev, "Couldn't initialize memory\n");
+	bdc_mem_free(bdc);
+
+	return -ENOMEM;
+}
+
+/* opposite to bdc_hw_init */
+static void bdc_hw_exit(struct bdc *bdc)
+{
+	dev_dbg(bdc->dev, "%s ()\n", __func__);
+	bdc_mem_free(bdc);
+}
+
+/* Initialize the bdc HW and memory */
+static int bdc_hw_init(struct bdc *bdc)
+{
+	int ret;
+
+	dev_dbg(bdc->dev, "%s ()\n", __func__);
+	ret = bdc_reset(bdc);
+	if (ret) {
+		dev_err(bdc->dev, "err resetting bdc abort bdc init%d\n", ret);
+		return ret;
+	}
+	ret = bdc_mem_alloc(bdc);
+	if (ret) {
+		dev_err(bdc->dev, "Mem alloc failed, aborting\n");
+		return -ENOMEM;
+	}
+	bdc_mem_init(bdc, 0);
+	bdc_dbg_regs(bdc);
+	dev_dbg(bdc->dev, "HW Init done\n");
+
+	return 0;
+}
+
+static int bdc_phy_init(struct bdc *bdc)
+{
+	int phy_num;
+	int ret;
+
+	for (phy_num = 0; phy_num < bdc->num_phys; phy_num++) {
+		ret = phy_init(bdc->phys[phy_num]);
+		if (ret)
+			goto err_exit_phy;
+		ret = phy_power_on(bdc->phys[phy_num]);
+		if (ret) {
+			phy_exit(bdc->phys[phy_num]);
+			goto err_exit_phy;
+		}
+	}
+
+	return 0;
+
+err_exit_phy:
+	while (--phy_num >= 0) {
+		phy_power_off(bdc->phys[phy_num]);
+		phy_exit(bdc->phys[phy_num]);
+	}
+
+	return ret;
+}
+
+static void bdc_phy_exit(struct bdc *bdc)
+{
+	int phy_num;
+
+	for (phy_num = 0; phy_num < bdc->num_phys; phy_num++) {
+		phy_power_off(bdc->phys[phy_num]);
+		phy_exit(bdc->phys[phy_num]);
+	}
+}
+
+static int bdc_probe(struct platform_device *pdev)
+{
+	struct bdc *bdc;
+	int ret;
+	int irq;
+	u32 temp;
+	struct device *dev = &pdev->dev;
+	int phy_num;
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	bdc = devm_kzalloc(dev, sizeof(*bdc), GFP_KERNEL);
+	if (!bdc)
+		return -ENOMEM;
+
+	bdc->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(bdc->regs))
+		return PTR_ERR(bdc->regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+	spin_lock_init(&bdc->lock);
+	platform_set_drvdata(pdev, bdc);
+	bdc->irq = irq;
+	bdc->dev = dev;
+	dev_dbg(dev, "bdc->regs: %p irq=%d\n", bdc->regs, bdc->irq);
+
+	bdc->num_phys = of_count_phandle_with_args(dev->of_node,
+						"phys", "#phy-cells");
+	if (bdc->num_phys > 0) {
+		bdc->phys = devm_kcalloc(dev, bdc->num_phys,
+					sizeof(struct phy *), GFP_KERNEL);
+		if (!bdc->phys)
+			return -ENOMEM;
+	} else {
+		bdc->num_phys = 0;
+	}
+	dev_info(dev, "Using %d phy(s)\n", bdc->num_phys);
+
+	for (phy_num = 0; phy_num < bdc->num_phys; phy_num++) {
+		bdc->phys[phy_num] = devm_of_phy_get_by_index(
+			dev, dev->of_node, phy_num);
+		if (IS_ERR(bdc->phys[phy_num])) {
+			ret = PTR_ERR(bdc->phys[phy_num]);
+			dev_err(bdc->dev,
+				"BDC phy specified but not found:%d\n", ret);
+			return ret;
+		}
+	}
+
+	bdc->clk = devm_clk_get_optional(dev, "sw_usbd");
+	if (IS_ERR(bdc->clk))
+		return PTR_ERR(bdc->clk);
+
+	ret = clk_prepare_enable(bdc->clk);
+	if (ret) {
+		dev_err(dev, "could not enable clock\n");
+		return ret;
+	}
+
+	ret = bdc_phy_init(bdc);
+	if (ret) {
+		dev_err(bdc->dev, "BDC phy init failure:%d\n", ret);
+		goto disable_clk;
+	}
+
+	temp = bdc_readl(bdc->regs, BDC_BDCCAP1);
+	if ((temp & BDC_P64) &&
+			!dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) {
+		dev_dbg(dev, "Using 64-bit address\n");
+	} else {
+		ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+		if (ret) {
+			dev_err(dev,
+				"No suitable DMA config available, abort\n");
+			ret = -ENOTSUPP;
+			goto phycleanup;
+		}
+		dev_dbg(dev, "Using 32-bit address\n");
+	}
+	ret = bdc_hw_init(bdc);
+	if (ret) {
+		dev_err(dev, "BDC init failure:%d\n", ret);
+		goto phycleanup;
+	}
+	ret = bdc_udc_init(bdc);
+	if (ret) {
+		dev_err(dev, "BDC Gadget init failure:%d\n", ret);
+		goto cleanup;
+	}
+	return 0;
+
+cleanup:
+	bdc_hw_exit(bdc);
+phycleanup:
+	bdc_phy_exit(bdc);
+disable_clk:
+	clk_disable_unprepare(bdc->clk);
+	return ret;
+}
+
+static int bdc_remove(struct platform_device *pdev)
+{
+	struct bdc *bdc;
+
+	bdc  = platform_get_drvdata(pdev);
+	dev_dbg(bdc->dev, "%s ()\n", __func__);
+	bdc_udc_exit(bdc);
+	bdc_hw_exit(bdc);
+	bdc_phy_exit(bdc);
+	clk_disable_unprepare(bdc->clk);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bdc_suspend(struct device *dev)
+{
+	struct bdc *bdc = dev_get_drvdata(dev);
+	int ret;
+
+	/* Halt the controller */
+	ret = bdc_stop(bdc);
+	if (!ret)
+		clk_disable_unprepare(bdc->clk);
+
+	return ret;
+}
+
+static int bdc_resume(struct device *dev)
+{
+	struct bdc *bdc = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(bdc->clk);
+	if (ret) {
+		dev_err(bdc->dev, "err enabling the clock\n");
+		return ret;
+	}
+	ret = bdc_reinit(bdc);
+	if (ret) {
+		dev_err(bdc->dev, "err in bdc reinit\n");
+		clk_disable_unprepare(bdc->clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(bdc_pm_ops, bdc_suspend,
+		bdc_resume);
+
+static const struct of_device_id bdc_of_match[] = {
+	{ .compatible = "brcm,bdc-udc-v2" },
+	{ .compatible = "brcm,bdc" },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver bdc_driver = {
+	.driver		= {
+		.name	= BRCM_BDC_NAME,
+		.pm = &bdc_pm_ops,
+		.of_match_table	= bdc_of_match,
+	},
+	.probe		= bdc_probe,
+	.remove		= bdc_remove,
+};
+
+module_platform_driver(bdc_driver);
+MODULE_AUTHOR("Ashwini Pahuja <ashwini.linux@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(BRCM_BDC_DESC);
diff --git a/drivers/usb/gadget/udc/bdc/bdc_dbg.c b/drivers/usb/gadget/udc/bdc/bdc_dbg.c
new file mode 100644
index 000000000..9c03e1330
--- /dev/null
+++ b/drivers/usb/gadget/udc/bdc/bdc_dbg.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * bdc_dbg.c - BRCM BDC USB3.0 device controller debug functions
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * Author: Ashwini Pahuja
+ */
+
+#include "bdc.h"
+#include "bdc_dbg.h"
+
+void bdc_dbg_regs(struct bdc *bdc)
+{
+	u32 temp;
+
+	dev_vdbg(bdc->dev, "bdc->regs:%p\n", bdc->regs);
+	temp = bdc_readl(bdc->regs, BDC_BDCCFG0);
+	dev_vdbg(bdc->dev, "bdccfg0:0x%08x\n", temp);
+	temp = bdc_readl(bdc->regs, BDC_BDCCFG1);
+	dev_vdbg(bdc->dev, "bdccfg1:0x%08x\n", temp);
+	temp = bdc_readl(bdc->regs, BDC_BDCCAP0);
+	dev_vdbg(bdc->dev, "bdccap0:0x%08x\n", temp);
+	temp = bdc_readl(bdc->regs, BDC_BDCCAP1);
+	dev_vdbg(bdc->dev, "bdccap1:0x%08x\n", temp);
+	temp = bdc_readl(bdc->regs, BDC_USPC);
+	dev_vdbg(bdc->dev, "uspc:0x%08x\n", temp);
+	temp = bdc_readl(bdc->regs, BDC_DVCSA);
+	dev_vdbg(bdc->dev, "dvcsa:0x%08x\n", temp);
+	temp = bdc_readl(bdc->regs, BDC_DVCSB);
+	dev_vdbg(bdc->dev, "dvcsb:0x%x08\n", temp);
+}
+
+void bdc_dump_epsts(struct bdc *bdc)
+{
+	u32 temp;
+
+	temp = bdc_readl(bdc->regs, BDC_EPSTS0);
+	dev_vdbg(bdc->dev, "BDC_EPSTS0:0x%08x\n", temp);
+
+	temp = bdc_readl(bdc->regs, BDC_EPSTS1);
+	dev_vdbg(bdc->dev, "BDC_EPSTS1:0x%x\n", temp);
+
+	temp = bdc_readl(bdc->regs, BDC_EPSTS2);
+	dev_vdbg(bdc->dev, "BDC_EPSTS2:0x%08x\n", temp);
+
+	temp = bdc_readl(bdc->regs, BDC_EPSTS3);
+	dev_vdbg(bdc->dev, "BDC_EPSTS3:0x%08x\n", temp);
+
+	temp = bdc_readl(bdc->regs, BDC_EPSTS4);
+	dev_vdbg(bdc->dev, "BDC_EPSTS4:0x%08x\n", temp);
+
+	temp = bdc_readl(bdc->regs, BDC_EPSTS5);
+	dev_vdbg(bdc->dev, "BDC_EPSTS5:0x%08x\n", temp);
+
+	temp = bdc_readl(bdc->regs, BDC_EPSTS6);
+	dev_vdbg(bdc->dev, "BDC_EPSTS6:0x%08x\n", temp);
+
+	temp = bdc_readl(bdc->regs, BDC_EPSTS7);
+	dev_vdbg(bdc->dev, "BDC_EPSTS7:0x%08x\n", temp);
+}
+
+void bdc_dbg_srr(struct bdc *bdc, u32 srr_num)
+{
+	struct bdc_sr *sr;
+	dma_addr_t addr;
+	int i;
+
+	sr = bdc->srr.sr_bds;
+	addr = bdc->srr.dma_addr;
+	dev_vdbg(bdc->dev, "%s sr:%p dqp_index:%d\n", __func__,
+						sr, bdc->srr.dqp_index);
+	for (i = 0; i < NUM_SR_ENTRIES; i++) {
+		sr = &bdc->srr.sr_bds[i];
+		dev_vdbg(bdc->dev, "%llx %08x %08x %08x %08x\n",
+					(unsigned long long)addr,
+					le32_to_cpu(sr->offset[0]),
+					le32_to_cpu(sr->offset[1]),
+					le32_to_cpu(sr->offset[2]),
+					le32_to_cpu(sr->offset[3]));
+		addr += sizeof(*sr);
+	}
+}
+
+void bdc_dbg_bd_list(struct bdc *bdc, struct bdc_ep *ep)
+{
+	struct bd_list *bd_list = &ep->bd_list;
+	struct bd_table *bd_table;
+	struct bdc_bd *bd;
+	int tbi, bdi, gbdi;
+	dma_addr_t dma;
+
+	gbdi = 0;
+	dev_vdbg(bdc->dev,
+		"Dump bd list for %s epnum:%d\n",
+		ep->name, ep->ep_num);
+
+	dev_vdbg(bdc->dev,
+		"tabs:%d max_bdi:%d eqp_bdi:%d hwd_bdi:%d num_bds_table:%d\n",
+		bd_list->num_tabs, bd_list->max_bdi, bd_list->eqp_bdi,
+		bd_list->hwd_bdi, bd_list->num_bds_table);
+
+	for (tbi = 0; tbi < bd_list->num_tabs; tbi++) {
+		bd_table = bd_list->bd_table_array[tbi];
+		for (bdi = 0; bdi < bd_list->num_bds_table; bdi++) {
+			bd =  bd_table->start_bd + bdi;
+			dma = bd_table->dma + (sizeof(struct bdc_bd) * bdi);
+			dev_vdbg(bdc->dev,
+				"tbi:%2d bdi:%2d gbdi:%2d virt:%p phys:%llx %08x %08x %08x %08x\n",
+				tbi, bdi, gbdi++, bd, (unsigned long long)dma,
+				le32_to_cpu(bd->offset[0]),
+				le32_to_cpu(bd->offset[1]),
+				le32_to_cpu(bd->offset[2]),
+				le32_to_cpu(bd->offset[3]));
+		}
+		dev_vdbg(bdc->dev, "\n\n");
+	}
+}
diff --git a/drivers/usb/gadget/udc/bdc/bdc_dbg.h b/drivers/usb/gadget/udc/bdc/bdc_dbg.h
new file mode 100644
index 000000000..acd8332f8
--- /dev/null
+++ b/drivers/usb/gadget/udc/bdc/bdc_dbg.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * bdc_dbg.h - header for the BDC debug functions
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * Author: Ashwini Pahuja
+ */
+#ifndef __LINUX_BDC_DBG_H__
+#define __LINUX_BDC_DBG_H__
+
+#include "bdc.h"
+
+#ifdef CONFIG_USB_GADGET_VERBOSE
+void bdc_dbg_bd_list(struct bdc *bdc, struct bdc_ep *ep);
+void bdc_dbg_srr(struct bdc *bdc, u32 srr_num);
+void bdc_dbg_regs(struct bdc *bdc);
+void bdc_dump_epsts(struct bdc *bdc);
+#else
+static inline void bdc_dbg_regs(struct bdc *bdc)
+{ }
+
+static inline void bdc_dbg_srr(struct bdc *bdc, u32 srr_num)
+{ }
+
+static inline void bdc_dbg_bd_list(struct bdc *bdc, struct bdc_ep *ep)
+{ }
+
+static inline void bdc_dump_epsts(struct bdc *bdc)
+{ }
+#endif /* CONFIG_USB_GADGET_VERBOSE */
+#endif /* __LINUX_BDC_DBG_H__ */
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c
new file mode 100644
index 000000000..fa88f210e
--- /dev/null
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c
@@ -0,0 +1,2035 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * bdc_ep.c - BRCM BDC USB3.0 device controller endpoint related functions
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * Author: Ashwini Pahuja
+ *
+ * Based on drivers under drivers/usb/
+ */
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/dmapool.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <asm/unaligned.h>
+#include <linux/platform_device.h>
+#include <linux/usb/composite.h>
+
+#include "bdc.h"
+#include "bdc_ep.h"
+#include "bdc_cmd.h"
+#include "bdc_dbg.h"
+
+static const char * const ep0_state_string[] =  {
+	"WAIT_FOR_SETUP",
+	"WAIT_FOR_DATA_START",
+	"WAIT_FOR_DATA_XMIT",
+	"WAIT_FOR_STATUS_START",
+	"WAIT_FOR_STATUS_XMIT",
+	"STATUS_PENDING"
+};
+
+/* Free the bdl during ep disable */
+static void ep_bd_list_free(struct bdc_ep *ep, u32 num_tabs)
+{
+	struct bd_list *bd_list = &ep->bd_list;
+	struct bdc *bdc = ep->bdc;
+	struct bd_table *bd_table;
+	int index;
+
+	dev_dbg(bdc->dev, "%s ep:%s num_tabs:%d\n",
+				 __func__, ep->name, num_tabs);
+
+	if (!bd_list->bd_table_array) {
+		dev_dbg(bdc->dev, "%s already freed\n", ep->name);
+		return;
+	}
+	for (index = 0; index < num_tabs; index++) {
+		/*
+		 * check if the bd_table struct is allocated ?
+		 * if yes, then check if bd memory has been allocated, then
+		 * free the dma_pool and also the bd_table struct memory
+		 */
+		bd_table = bd_list->bd_table_array[index];
+		dev_dbg(bdc->dev, "bd_table:%p index:%d\n", bd_table, index);
+		if (!bd_table) {
+			dev_dbg(bdc->dev, "bd_table not allocated\n");
+			continue;
+		}
+		if (!bd_table->start_bd) {
+			dev_dbg(bdc->dev, "bd dma pool not allocated\n");
+			continue;
+		}
+
+		dev_dbg(bdc->dev,
+				"Free dma pool start_bd:%p dma:%llx\n",
+				bd_table->start_bd,
+				(unsigned long long)bd_table->dma);
+
+		dma_pool_free(bdc->bd_table_pool,
+				bd_table->start_bd,
+				bd_table->dma);
+		/* Free the bd_table structure */
+		kfree(bd_table);
+	}
+	/* Free the bd table array */
+	kfree(ep->bd_list.bd_table_array);
+}
+
+/*
+ * chain the tables, by insteting a chain bd at the end of prev_table, pointing
+ * to next_table
+ */
+static inline void chain_table(struct bd_table *prev_table,
+					struct bd_table *next_table,
+					u32 bd_p_tab)
+{
+	/* Chain the prev table to next table */
+	prev_table->start_bd[bd_p_tab-1].offset[0] =
+				cpu_to_le32(lower_32_bits(next_table->dma));
+
+	prev_table->start_bd[bd_p_tab-1].offset[1] =
+				cpu_to_le32(upper_32_bits(next_table->dma));
+
+	prev_table->start_bd[bd_p_tab-1].offset[2] =
+				0x0;
+
+	prev_table->start_bd[bd_p_tab-1].offset[3] =
+				cpu_to_le32(MARK_CHAIN_BD);
+}
+
+/* Allocate the bdl for ep, during config ep */
+static int ep_bd_list_alloc(struct bdc_ep *ep)
+{
+	struct bd_table *prev_table = NULL;
+	int index, num_tabs, bd_p_tab;
+	struct bdc *bdc = ep->bdc;
+	struct bd_table *bd_table;
+	dma_addr_t dma;
+
+	if (usb_endpoint_xfer_isoc(ep->desc))
+		num_tabs = NUM_TABLES_ISOCH;
+	else
+		num_tabs = NUM_TABLES;
+
+	bd_p_tab = NUM_BDS_PER_TABLE;
+	/* if there is only 1 table in bd list then loop chain to self */
+	dev_dbg(bdc->dev,
+		"%s ep:%p num_tabs:%d\n",
+		__func__, ep, num_tabs);
+
+	/* Allocate memory for table array */
+	ep->bd_list.bd_table_array = kcalloc(num_tabs,
+					     sizeof(struct bd_table *),
+					     GFP_ATOMIC);
+	if (!ep->bd_list.bd_table_array)
+		return -ENOMEM;
+
+	/* Allocate memory for each table */
+	for (index = 0; index < num_tabs; index++) {
+		/* Allocate memory for bd_table structure */
+		bd_table = kzalloc(sizeof(*bd_table), GFP_ATOMIC);
+		if (!bd_table)
+			goto fail;
+
+		bd_table->start_bd = dma_pool_zalloc(bdc->bd_table_pool,
+							GFP_ATOMIC,
+							&dma);
+		if (!bd_table->start_bd) {
+			kfree(bd_table);
+			goto fail;
+		}
+
+		bd_table->dma = dma;
+
+		dev_dbg(bdc->dev,
+			"index:%d start_bd:%p dma=%08llx prev_table:%p\n",
+			index, bd_table->start_bd,
+			(unsigned long long)bd_table->dma, prev_table);
+
+		ep->bd_list.bd_table_array[index] = bd_table;
+		if (prev_table)
+			chain_table(prev_table, bd_table, bd_p_tab);
+
+		prev_table = bd_table;
+	}
+	chain_table(prev_table, ep->bd_list.bd_table_array[0], bd_p_tab);
+	/* Memory allocation is successful, now init the internal fields */
+	ep->bd_list.num_tabs = num_tabs;
+	ep->bd_list.max_bdi  = (num_tabs * bd_p_tab) - 1;
+	ep->bd_list.num_tabs = num_tabs;
+	ep->bd_list.num_bds_table = bd_p_tab;
+	ep->bd_list.eqp_bdi = 0;
+	ep->bd_list.hwd_bdi = 0;
+
+	return 0;
+fail:
+	/* Free the bd_table_array, bd_table struct, bd's */
+	ep_bd_list_free(ep, num_tabs);
+
+	return -ENOMEM;
+}
+
+/* returns how many bd's are need for this transfer */
+static inline int bd_needed_req(struct bdc_req *req)
+{
+	int bd_needed = 0;
+	int remaining;
+
+	/* 1 bd needed for 0 byte transfer */
+	if (req->usb_req.length == 0)
+		return 1;
+
+	/* remaining bytes after tranfering all max BD size BD's */
+	remaining = req->usb_req.length % BD_MAX_BUFF_SIZE;
+	if (remaining)
+		bd_needed++;
+
+	/* How many maximum BUFF size BD's ? */
+	remaining = req->usb_req.length / BD_MAX_BUFF_SIZE;
+	bd_needed += remaining;
+
+	return bd_needed;
+}
+
+/* returns the bd index(bdi) corresponding to bd dma address */
+static int bd_add_to_bdi(struct bdc_ep *ep, dma_addr_t bd_dma_addr)
+{
+	struct bd_list *bd_list = &ep->bd_list;
+	dma_addr_t dma_first_bd, dma_last_bd;
+	struct bdc *bdc = ep->bdc;
+	struct bd_table *bd_table;
+	bool found = false;
+	int tbi, bdi;
+
+	dma_first_bd = dma_last_bd = 0;
+	dev_dbg(bdc->dev, "%s  %llx\n",
+			__func__, (unsigned long long)bd_dma_addr);
+	/*
+	 * Find in which table this bd_dma_addr belongs?, go through the table
+	 * array and compare addresses of first and last address of bd of each
+	 * table
+	 */
+	for (tbi = 0; tbi < bd_list->num_tabs; tbi++) {
+		bd_table = bd_list->bd_table_array[tbi];
+		dma_first_bd = bd_table->dma;
+		dma_last_bd = bd_table->dma +
+					(sizeof(struct bdc_bd) *
+					(bd_list->num_bds_table - 1));
+		dev_dbg(bdc->dev, "dma_first_bd:%llx dma_last_bd:%llx\n",
+					(unsigned long long)dma_first_bd,
+					(unsigned long long)dma_last_bd);
+		if (bd_dma_addr >= dma_first_bd && bd_dma_addr <= dma_last_bd) {
+			found = true;
+			break;
+		}
+	}
+	if (unlikely(!found)) {
+		dev_err(bdc->dev, "%s FATAL err, bd not found\n", __func__);
+		return -EINVAL;
+	}
+	/* Now we know the table, find the bdi */
+	bdi = (bd_dma_addr - dma_first_bd) / sizeof(struct bdc_bd);
+
+	/* return the global bdi, to compare with ep eqp_bdi */
+	return (bdi + (tbi * bd_list->num_bds_table));
+}
+
+/* returns the table index(tbi) of the given bdi */
+static int bdi_to_tbi(struct bdc_ep *ep, int bdi)
+{
+	int tbi;
+
+	tbi = bdi / ep->bd_list.num_bds_table;
+	dev_vdbg(ep->bdc->dev,
+		"bdi:%d num_bds_table:%d tbi:%d\n",
+		bdi, ep->bd_list.num_bds_table, tbi);
+
+	return tbi;
+}
+
+/* Find the bdi last bd in the transfer */
+static inline int find_end_bdi(struct bdc_ep *ep, int next_hwd_bdi)
+{
+	int end_bdi;
+
+	end_bdi = next_hwd_bdi - 1;
+	if (end_bdi < 0)
+		end_bdi = ep->bd_list.max_bdi - 1;
+	else if ((end_bdi % (ep->bd_list.num_bds_table-1)) == 0)
+		end_bdi--;
+
+	return end_bdi;
+}
+
+/*
+ * How many transfer bd's are available on this ep bdl, chain bds are not
+ * counted in available bds
+ */
+static int bd_available_ep(struct bdc_ep *ep)
+{
+	struct bd_list *bd_list = &ep->bd_list;
+	int available1, available2;
+	struct bdc *bdc = ep->bdc;
+	int chain_bd1, chain_bd2;
+	int available_bd = 0;
+
+	available1 = available2 = chain_bd1 = chain_bd2 = 0;
+	/* if empty then we have all bd's available - number of chain bd's */
+	if (bd_list->eqp_bdi == bd_list->hwd_bdi)
+		return bd_list->max_bdi - bd_list->num_tabs;
+
+	/*
+	 * Depending upon where eqp and dqp pointers are, caculate number
+	 * of avaialble bd's
+	 */
+	if (bd_list->hwd_bdi < bd_list->eqp_bdi) {
+		/* available bd's are from eqp..max_bds + 0..dqp - chain_bds */
+		available1 = bd_list->max_bdi - bd_list->eqp_bdi;
+		available2 = bd_list->hwd_bdi;
+		chain_bd1 = available1 / bd_list->num_bds_table;
+		chain_bd2 = available2 / bd_list->num_bds_table;
+		dev_vdbg(bdc->dev, "chain_bd1:%d chain_bd2:%d\n",
+						chain_bd1, chain_bd2);
+		available_bd = available1 + available2 - chain_bd1 - chain_bd2;
+	} else {
+		/* available bd's are from eqp..dqp - number of chain bd's */
+		available1 = bd_list->hwd_bdi -  bd_list->eqp_bdi;
+		/* if gap between eqp and dqp is less than NUM_BDS_PER_TABLE */
+		if ((bd_list->hwd_bdi - bd_list->eqp_bdi)
+					<= bd_list->num_bds_table) {
+			/* If there any chain bd in between */
+			if (!(bdi_to_tbi(ep, bd_list->hwd_bdi)
+					== bdi_to_tbi(ep, bd_list->eqp_bdi))) {
+				available_bd = available1 - 1;
+			}
+		} else {
+			chain_bd1 = available1 / bd_list->num_bds_table;
+			available_bd = available1 - chain_bd1;
+		}
+	}
+	/*
+	 * we need to keep one extra bd to check if ring is full or empty so
+	 * reduce by 1
+	 */
+	available_bd--;
+	dev_vdbg(bdc->dev, "available_bd:%d\n", available_bd);
+
+	return available_bd;
+}
+
+/* Notify the hardware after queueing the bd to bdl */
+void bdc_notify_xfr(struct bdc *bdc, u32 epnum)
+{
+	struct bdc_ep *ep = bdc->bdc_ep_array[epnum];
+
+	dev_vdbg(bdc->dev, "%s epnum:%d\n", __func__, epnum);
+	/*
+	 * We don't have anyway to check if ep state is running,
+	 * except the software flags.
+	 */
+	if (unlikely(ep->flags & BDC_EP_STOP))
+		ep->flags &= ~BDC_EP_STOP;
+
+	bdc_writel(bdc->regs, BDC_XSFNTF, epnum);
+}
+
+/* returns the bd corresponding to bdi */
+static struct bdc_bd *bdi_to_bd(struct bdc_ep *ep, int bdi)
+{
+	int tbi = bdi_to_tbi(ep, bdi);
+	int local_bdi = 0;
+
+	local_bdi = bdi - (tbi * ep->bd_list.num_bds_table);
+	dev_vdbg(ep->bdc->dev,
+		"%s bdi:%d local_bdi:%d\n",
+		 __func__, bdi, local_bdi);
+
+	return (ep->bd_list.bd_table_array[tbi]->start_bd + local_bdi);
+}
+
+/* Advance the enqueue pointer */
+static void ep_bdlist_eqp_adv(struct bdc_ep *ep)
+{
+	ep->bd_list.eqp_bdi++;
+	/* if it's chain bd, then move to next */
+	if (((ep->bd_list.eqp_bdi + 1) % ep->bd_list.num_bds_table) == 0)
+		ep->bd_list.eqp_bdi++;
+
+	/* if the eqp is pointing to last + 1 then move back to 0 */
+	if (ep->bd_list.eqp_bdi == (ep->bd_list.max_bdi + 1))
+		ep->bd_list.eqp_bdi = 0;
+}
+
+/* Setup the first bd for ep0 transfer */
+static int setup_first_bd_ep0(struct bdc *bdc, struct bdc_req *req, u32 *dword3)
+{
+	u16 wValue;
+	u32 req_len;
+
+	req->ep->dir = 0;
+	req_len = req->usb_req.length;
+	switch (bdc->ep0_state) {
+	case WAIT_FOR_DATA_START:
+		*dword3 |= BD_TYPE_DS;
+		if (bdc->setup_pkt.bRequestType & USB_DIR_IN)
+			*dword3 |= BD_DIR_IN;
+
+		/* check if zlp will be needed */
+		wValue = le16_to_cpu(bdc->setup_pkt.wValue);
+		if ((wValue > req_len) &&
+				(req_len % bdc->gadget.ep0->maxpacket == 0)) {
+			dev_dbg(bdc->dev, "ZLP needed wVal:%d len:%d MaxP:%d\n",
+					wValue, req_len,
+					bdc->gadget.ep0->maxpacket);
+			bdc->zlp_needed = true;
+		}
+		break;
+
+	case WAIT_FOR_STATUS_START:
+		*dword3 |= BD_TYPE_SS;
+		if (!le16_to_cpu(bdc->setup_pkt.wLength) ||
+				!(bdc->setup_pkt.bRequestType & USB_DIR_IN))
+			*dword3 |= BD_DIR_IN;
+		break;
+	default:
+		dev_err(bdc->dev,
+			"Unknown ep0 state for queueing bd ep0_state:%s\n",
+			ep0_state_string[bdc->ep0_state]);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Setup the bd dma descriptor for a given request */
+static int setup_bd_list_xfr(struct bdc *bdc, struct bdc_req *req, int num_bds)
+{
+	dma_addr_t buf_add = req->usb_req.dma;
+	u32 maxp, tfs, dword2, dword3;
+	struct bd_transfer *bd_xfr;
+	struct bd_list *bd_list;
+	struct bdc_ep *ep;
+	struct bdc_bd *bd;
+	int ret, bdnum;
+	u32 req_len;
+
+	ep = req->ep;
+	bd_list = &ep->bd_list;
+	bd_xfr = &req->bd_xfr;
+	bd_xfr->req = req;
+	bd_xfr->start_bdi = bd_list->eqp_bdi;
+	bd = bdi_to_bd(ep, bd_list->eqp_bdi);
+	req_len = req->usb_req.length;
+	maxp = usb_endpoint_maxp(ep->desc);
+	tfs = roundup(req->usb_req.length, maxp);
+	tfs = tfs/maxp;
+	dev_vdbg(bdc->dev, "%s ep:%s num_bds:%d tfs:%d r_len:%d bd:%p\n",
+				__func__, ep->name, num_bds, tfs, req_len, bd);
+
+	for (bdnum = 0; bdnum < num_bds; bdnum++) {
+		dword2 = dword3 = 0;
+		/* First bd */
+		if (!bdnum) {
+			dword3 |= BD_SOT|BD_SBF|(tfs<<BD_TFS_SHIFT);
+			dword2 |= BD_LTF;
+			/* format of first bd for ep0 is different than other */
+			if (ep->ep_num == 1) {
+				ret = setup_first_bd_ep0(bdc, req, &dword3);
+				if (ret)
+					return ret;
+			}
+		}
+		if (!req->ep->dir)
+			dword3 |= BD_ISP;
+
+		if (req_len > BD_MAX_BUFF_SIZE) {
+			dword2 |= BD_MAX_BUFF_SIZE;
+			req_len -= BD_MAX_BUFF_SIZE;
+		} else {
+			/* this should be the last bd */
+			dword2 |= req_len;
+			dword3 |= BD_IOC;
+			dword3 |= BD_EOT;
+		}
+		/* Currently only 1 INT target is supported */
+		dword2 |= BD_INTR_TARGET(0);
+		bd = bdi_to_bd(ep, ep->bd_list.eqp_bdi);
+		if (unlikely(!bd)) {
+			dev_err(bdc->dev, "Err bd pointing to wrong addr\n");
+			return -EINVAL;
+		}
+		/* write bd */
+		bd->offset[0] = cpu_to_le32(lower_32_bits(buf_add));
+		bd->offset[1] = cpu_to_le32(upper_32_bits(buf_add));
+		bd->offset[2] = cpu_to_le32(dword2);
+		bd->offset[3] = cpu_to_le32(dword3);
+		/* advance eqp pointer */
+		ep_bdlist_eqp_adv(ep);
+		/* advance the buff pointer */
+		buf_add += BD_MAX_BUFF_SIZE;
+		dev_vdbg(bdc->dev, "buf_add:%08llx req_len:%d bd:%p eqp:%d\n",
+				(unsigned long long)buf_add, req_len, bd,
+							ep->bd_list.eqp_bdi);
+		bd = bdi_to_bd(ep, ep->bd_list.eqp_bdi);
+		bd->offset[3] = cpu_to_le32(BD_SBF);
+	}
+	/* clear the STOP BD fetch bit from the first bd of this xfr */
+	bd = bdi_to_bd(ep, bd_xfr->start_bdi);
+	bd->offset[3] &= cpu_to_le32(~BD_SBF);
+	/* the new eqp will be next hw dqp */
+	bd_xfr->num_bds  = num_bds;
+	bd_xfr->next_hwd_bdi = ep->bd_list.eqp_bdi;
+	/* everything is written correctly before notifying the HW */
+	wmb();
+
+	return 0;
+}
+
+/* Queue the xfr */
+static int bdc_queue_xfr(struct bdc *bdc, struct bdc_req *req)
+{
+	int num_bds, bd_available;
+	struct bdc_ep *ep;
+	int ret;
+
+	ep = req->ep;
+	dev_dbg(bdc->dev, "%s req:%p\n", __func__, req);
+	dev_dbg(bdc->dev, "eqp_bdi:%d hwd_bdi:%d\n",
+			ep->bd_list.eqp_bdi, ep->bd_list.hwd_bdi);
+
+	num_bds =  bd_needed_req(req);
+	bd_available = bd_available_ep(ep);
+
+	/* how many bd's are avaialble on ep */
+	if (num_bds > bd_available)
+		return -ENOMEM;
+
+	ret = setup_bd_list_xfr(bdc, req, num_bds);
+	if (ret)
+		return ret;
+	list_add_tail(&req->queue, &ep->queue);
+	bdc_dbg_bd_list(bdc, ep);
+	bdc_notify_xfr(bdc, ep->ep_num);
+
+	return 0;
+}
+
+/* callback to gadget layer when xfr completes */
+static void bdc_req_complete(struct bdc_ep *ep, struct bdc_req *req,
+						int status)
+{
+	struct bdc *bdc = ep->bdc;
+
+	if (req == NULL)
+		return;
+
+	dev_dbg(bdc->dev, "%s ep:%s status:%d\n", __func__, ep->name, status);
+	list_del(&req->queue);
+	req->usb_req.status = status;
+	usb_gadget_unmap_request(&bdc->gadget, &req->usb_req, ep->dir);
+	if (req->usb_req.complete) {
+		spin_unlock(&bdc->lock);
+		usb_gadget_giveback_request(&ep->usb_ep, &req->usb_req);
+		spin_lock(&bdc->lock);
+	}
+}
+
+/* Disable the endpoint */
+int bdc_ep_disable(struct bdc_ep *ep)
+{
+	struct bdc_req *req;
+	struct bdc *bdc;
+	int ret;
+
+	ret = 0;
+	bdc = ep->bdc;
+	dev_dbg(bdc->dev, "%s() ep->ep_num=%d\n", __func__, ep->ep_num);
+	/* Stop the endpoint */
+	ret = bdc_stop_ep(bdc, ep->ep_num);
+
+	/*
+	 * Intentionally don't check the ret value of stop, it can fail in
+	 * disconnect scenarios, continue with dconfig
+	 */
+	/* de-queue any pending requests */
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct bdc_req,
+				queue);
+		bdc_req_complete(ep, req, -ESHUTDOWN);
+	}
+	/* deconfigure the endpoint */
+	ret = bdc_dconfig_ep(bdc, ep);
+	if (ret)
+		dev_warn(bdc->dev,
+			"dconfig fail but continue with memory free");
+
+	ep->flags = 0;
+	/* ep0 memory is not freed, but reused on next connect sr */
+	if (ep->ep_num == 1)
+		return 0;
+
+	/* Free the bdl memory */
+	ep_bd_list_free(ep, ep->bd_list.num_tabs);
+	ep->desc = NULL;
+	ep->comp_desc = NULL;
+	ep->usb_ep.desc = NULL;
+	ep->ep_type = 0;
+
+	return ret;
+}
+
+/* Enable the ep */
+int bdc_ep_enable(struct bdc_ep *ep)
+{
+	struct bdc *bdc;
+	int ret = 0;
+
+	bdc = ep->bdc;
+	dev_dbg(bdc->dev, "%s NUM_TABLES:%d %d\n",
+					__func__, NUM_TABLES, NUM_TABLES_ISOCH);
+
+	ret = ep_bd_list_alloc(ep);
+	if (ret) {
+		dev_err(bdc->dev, "ep bd list allocation failed:%d\n", ret);
+		return -ENOMEM;
+	}
+	bdc_dbg_bd_list(bdc, ep);
+	/* only for ep0: config ep is called for ep0 from connect event */
+	if (ep->ep_num == 1)
+		return ret;
+
+	/* Issue a configure endpoint command */
+	ret = bdc_config_ep(bdc, ep);
+	if (ret)
+		return ret;
+
+	ep->usb_ep.maxpacket = usb_endpoint_maxp(ep->desc);
+	ep->usb_ep.desc = ep->desc;
+	ep->usb_ep.comp_desc = ep->comp_desc;
+	ep->ep_type = usb_endpoint_type(ep->desc);
+	ep->flags |= BDC_EP_ENABLED;
+
+	return 0;
+}
+
+/* EP0 related code */
+
+/* Queue a status stage BD */
+static int ep0_queue_status_stage(struct bdc *bdc)
+{
+	struct bdc_req *status_req;
+	struct bdc_ep *ep;
+
+	status_req = &bdc->status_req;
+	ep = bdc->bdc_ep_array[1];
+	status_req->ep = ep;
+	status_req->usb_req.length = 0;
+	status_req->usb_req.status = -EINPROGRESS;
+	status_req->usb_req.actual = 0;
+	status_req->usb_req.complete = NULL;
+	bdc_queue_xfr(bdc, status_req);
+
+	return 0;
+}
+
+/* Queue xfr on ep0 */
+static int ep0_queue(struct bdc_ep *ep, struct bdc_req *req)
+{
+	struct bdc *bdc;
+	int ret;
+
+	bdc = ep->bdc;
+	dev_dbg(bdc->dev, "%s()\n", __func__);
+	req->usb_req.actual = 0;
+	req->usb_req.status = -EINPROGRESS;
+	req->epnum = ep->ep_num;
+
+	if (bdc->delayed_status) {
+		bdc->delayed_status = false;
+		/* if status stage was delayed? */
+		if (bdc->ep0_state == WAIT_FOR_STATUS_START) {
+			/* Queue a status stage BD */
+			ep0_queue_status_stage(bdc);
+			bdc->ep0_state = WAIT_FOR_STATUS_XMIT;
+			return 0;
+		}
+	} else {
+		/*
+		 * if delayed status is false and 0 length transfer is requested
+		 * i.e. for status stage of some setup request, then just
+		 * return from here the status stage is queued independently
+		 */
+		if (req->usb_req.length == 0)
+			return 0;
+
+	}
+	ret = usb_gadget_map_request(&bdc->gadget, &req->usb_req, ep->dir);
+	if (ret) {
+		dev_err(bdc->dev, "dma mapping failed %s\n", ep->name);
+		return ret;
+	}
+
+	return bdc_queue_xfr(bdc, req);
+}
+
+/* Queue data stage */
+static int ep0_queue_data_stage(struct bdc *bdc)
+{
+	struct bdc_ep *ep;
+
+	dev_dbg(bdc->dev, "%s\n", __func__);
+	ep = bdc->bdc_ep_array[1];
+	bdc->ep0_req.ep = ep;
+	bdc->ep0_req.usb_req.complete = NULL;
+
+	return ep0_queue(ep, &bdc->ep0_req);
+}
+
+/* Queue req on ep */
+static int ep_queue(struct bdc_ep *ep, struct bdc_req *req)
+{
+	struct bdc *bdc;
+	int ret = 0;
+
+	if (!req || !ep->usb_ep.desc)
+		return -EINVAL;
+
+	bdc = ep->bdc;
+
+	req->usb_req.actual = 0;
+	req->usb_req.status = -EINPROGRESS;
+	req->epnum = ep->ep_num;
+
+	ret = usb_gadget_map_request(&bdc->gadget, &req->usb_req, ep->dir);
+	if (ret) {
+		dev_err(bdc->dev, "dma mapping failed\n");
+		return ret;
+	}
+
+	return bdc_queue_xfr(bdc, req);
+}
+
+/* Dequeue a request from ep */
+static int ep_dequeue(struct bdc_ep *ep, struct bdc_req *req)
+{
+	int start_bdi, end_bdi, tbi, eqp_bdi, curr_hw_dqpi;
+	bool start_pending, end_pending;
+	bool first_remove = false;
+	struct bdc_req *first_req;
+	struct bdc_bd *bd_start;
+	struct bd_table *table;
+	dma_addr_t next_bd_dma;
+	u64   deq_ptr_64 = 0;
+	struct bdc  *bdc;
+	u32    tmp_32;
+	int ret;
+
+	bdc = ep->bdc;
+	start_pending = end_pending = false;
+	eqp_bdi = ep->bd_list.eqp_bdi - 1;
+
+	if (eqp_bdi < 0)
+		eqp_bdi = ep->bd_list.max_bdi;
+
+	start_bdi = req->bd_xfr.start_bdi;
+	end_bdi = find_end_bdi(ep, req->bd_xfr.next_hwd_bdi);
+
+	dev_dbg(bdc->dev, "%s ep:%s start:%d end:%d\n",
+					__func__, ep->name, start_bdi, end_bdi);
+	dev_dbg(bdc->dev, "%s ep=%p ep->desc=%p\n", __func__,
+						ep, (void *)ep->usb_ep.desc);
+	/* if still connected, stop the ep to see where the HW is ? */
+	if (!(bdc_readl(bdc->regs, BDC_USPC) & BDC_PST_MASK)) {
+		ret = bdc_stop_ep(bdc, ep->ep_num);
+		/* if there is an issue, then no need to go further */
+		if (ret)
+			return 0;
+	} else
+		return 0;
+
+	/*
+	 * After endpoint is stopped, there can be 3 cases, the request
+	 * is processed, pending or in the middle of processing
+	 */
+
+	/* The current hw dequeue pointer */
+	tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS0);
+	deq_ptr_64 = tmp_32;
+	tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS1);
+	deq_ptr_64 |= ((u64)tmp_32 << 32);
+
+	/* we have the dma addr of next bd that will be fetched by hardware */
+	curr_hw_dqpi = bd_add_to_bdi(ep, deq_ptr_64);
+	if (curr_hw_dqpi < 0)
+		return curr_hw_dqpi;
+
+	/*
+	 * curr_hw_dqpi points to actual dqp of HW and HW owns bd's from
+	 * curr_hw_dqbdi..eqp_bdi.
+	 */
+
+	/* Check if start_bdi and end_bdi are in range of HW owned BD's */
+	if (curr_hw_dqpi > eqp_bdi) {
+		/* there is a wrap from last to 0 */
+		if (start_bdi >= curr_hw_dqpi || start_bdi <= eqp_bdi) {
+			start_pending = true;
+			end_pending = true;
+		} else if (end_bdi >= curr_hw_dqpi || end_bdi <= eqp_bdi) {
+			end_pending = true;
+		}
+	} else {
+		if (start_bdi >= curr_hw_dqpi) {
+			start_pending = true;
+			end_pending = true;
+		} else if (end_bdi >= curr_hw_dqpi) {
+			end_pending = true;
+		}
+	}
+	dev_dbg(bdc->dev,
+		"start_pending:%d end_pending:%d speed:%d\n",
+		start_pending, end_pending, bdc->gadget.speed);
+
+	/* If both start till end are processes, we cannot deq req */
+	if (!start_pending && !end_pending)
+		return -EINVAL;
+
+	/*
+	 * if ep_dequeue is called after disconnect then just return
+	 * success from here
+	 */
+	if (bdc->gadget.speed == USB_SPEED_UNKNOWN)
+		return 0;
+	tbi = bdi_to_tbi(ep, req->bd_xfr.next_hwd_bdi);
+	table = ep->bd_list.bd_table_array[tbi];
+	next_bd_dma =  table->dma +
+			sizeof(struct bdc_bd)*(req->bd_xfr.next_hwd_bdi -
+					tbi * ep->bd_list.num_bds_table);
+
+	first_req = list_first_entry(&ep->queue, struct bdc_req,
+			queue);
+
+	if (req == first_req)
+		first_remove = true;
+
+	/*
+	 * Due to HW limitation we need to bypadd chain bd's and issue ep_bla,
+	 * incase if start is pending this is the first request in the list
+	 * then issue ep_bla instead of marking as chain bd
+	 */
+	if (start_pending && !first_remove) {
+		/*
+		 * Mark the start bd as Chain bd, and point the chain
+		 * bd to next_bd_dma
+		 */
+		bd_start = bdi_to_bd(ep, start_bdi);
+		bd_start->offset[0] = cpu_to_le32(lower_32_bits(next_bd_dma));
+		bd_start->offset[1] = cpu_to_le32(upper_32_bits(next_bd_dma));
+		bd_start->offset[2] = 0x0;
+		bd_start->offset[3] = cpu_to_le32(MARK_CHAIN_BD);
+		bdc_dbg_bd_list(bdc, ep);
+	} else if (end_pending) {
+		/*
+		 * The transfer is stopped in the middle, move the
+		 * HW deq pointer to next_bd_dma
+		 */
+		ret = bdc_ep_bla(bdc, ep, next_bd_dma);
+		if (ret) {
+			dev_err(bdc->dev, "error in ep_bla:%d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+/* Halt/Clear the ep based on value */
+static int ep_set_halt(struct bdc_ep *ep, u32 value)
+{
+	struct bdc *bdc;
+	int ret;
+
+	bdc = ep->bdc;
+	dev_dbg(bdc->dev, "%s ep:%s value=%d\n", __func__, ep->name, value);
+
+	if (value) {
+		dev_dbg(bdc->dev, "Halt\n");
+		if (ep->ep_num == 1)
+			bdc->ep0_state = WAIT_FOR_SETUP;
+
+		ret = bdc_ep_set_stall(bdc, ep->ep_num);
+		if (ret)
+			dev_err(bdc->dev, "failed to set STALL on %s\n",
+				ep->name);
+		else
+			ep->flags |= BDC_EP_STALL;
+	} else {
+		/* Clear */
+		dev_dbg(bdc->dev, "Before Clear\n");
+		ret = bdc_ep_clear_stall(bdc, ep->ep_num);
+		if (ret)
+			dev_err(bdc->dev, "failed to clear STALL on %s\n",
+				ep->name);
+		else
+			ep->flags &= ~BDC_EP_STALL;
+		dev_dbg(bdc->dev, "After  Clear\n");
+	}
+
+	return ret;
+}
+
+/* Free all the ep */
+void bdc_free_ep(struct bdc *bdc)
+{
+	struct bdc_ep *ep;
+	u8	epnum;
+
+	dev_dbg(bdc->dev, "%s\n", __func__);
+	for (epnum = 1; epnum < bdc->num_eps; epnum++) {
+		ep = bdc->bdc_ep_array[epnum];
+		if (!ep)
+			continue;
+
+		if (ep->flags & BDC_EP_ENABLED)
+			ep_bd_list_free(ep, ep->bd_list.num_tabs);
+
+		/* ep0 is not in this gadget list */
+		if (epnum != 1)
+			list_del(&ep->usb_ep.ep_list);
+
+		kfree(ep);
+	}
+}
+
+/* USB2 spec, section 7.1.20 */
+static int bdc_set_test_mode(struct bdc *bdc)
+{
+	u32 usb2_pm;
+
+	usb2_pm = bdc_readl(bdc->regs, BDC_USPPM2);
+	usb2_pm &= ~BDC_PTC_MASK;
+	dev_dbg(bdc->dev, "%s\n", __func__);
+	switch (bdc->test_mode) {
+	case USB_TEST_J:
+	case USB_TEST_K:
+	case USB_TEST_SE0_NAK:
+	case USB_TEST_PACKET:
+	case USB_TEST_FORCE_ENABLE:
+		usb2_pm |= bdc->test_mode << 28;
+		break;
+	default:
+		return -EINVAL;
+	}
+	dev_dbg(bdc->dev, "usb2_pm=%08x", usb2_pm);
+	bdc_writel(bdc->regs, BDC_USPPM2, usb2_pm);
+
+	return 0;
+}
+
+/*
+ * Helper function to handle Transfer status report with status as either
+ * success or short
+ */
+static void handle_xsr_succ_status(struct bdc *bdc, struct bdc_ep *ep,
+							struct bdc_sr *sreport)
+{
+	int short_bdi, start_bdi, end_bdi, max_len_bds, chain_bds;
+	struct bd_list *bd_list = &ep->bd_list;
+	int actual_length, length_short;
+	struct bd_transfer *bd_xfr;
+	struct bdc_bd *short_bd;
+	struct bdc_req *req;
+	u64   deq_ptr_64 = 0;
+	int status = 0;
+	int sr_status;
+	u32    tmp_32;
+
+	dev_dbg(bdc->dev, "%s  ep:%p\n", __func__, ep);
+	bdc_dbg_srr(bdc, 0);
+	/* do not process thie sr if ignore flag is set */
+	if (ep->ignore_next_sr) {
+		ep->ignore_next_sr = false;
+		return;
+	}
+
+	if (unlikely(list_empty(&ep->queue))) {
+		dev_warn(bdc->dev, "xfr srr with no BD's queued\n");
+		return;
+	}
+	req = list_entry(ep->queue.next, struct bdc_req,
+			queue);
+
+	bd_xfr = &req->bd_xfr;
+	sr_status = XSF_STS(le32_to_cpu(sreport->offset[3]));
+
+	/*
+	 * sr_status is short and this transfer has more than 1 bd then it needs
+	 * special handling,  this is only applicable for bulk and ctrl
+	 */
+	if (sr_status == XSF_SHORT &&  bd_xfr->num_bds > 1) {
+		/*
+		 * This is multi bd xfr, lets see which bd
+		 * caused short transfer and how many bytes have been
+		 * transferred so far.
+		 */
+		tmp_32 = le32_to_cpu(sreport->offset[0]);
+		deq_ptr_64 = tmp_32;
+		tmp_32 = le32_to_cpu(sreport->offset[1]);
+		deq_ptr_64 |= ((u64)tmp_32 << 32);
+		short_bdi = bd_add_to_bdi(ep, deq_ptr_64);
+		if (unlikely(short_bdi < 0))
+			dev_warn(bdc->dev, "bd doesn't exist?\n");
+
+		start_bdi =  bd_xfr->start_bdi;
+		/*
+		 * We know the start_bdi and short_bdi, how many xfr
+		 * bds in between
+		 */
+		if (start_bdi <= short_bdi) {
+			max_len_bds = short_bdi - start_bdi;
+			if (max_len_bds <= bd_list->num_bds_table) {
+				if (!(bdi_to_tbi(ep, start_bdi) ==
+						bdi_to_tbi(ep, short_bdi)))
+					max_len_bds--;
+			} else {
+				chain_bds = max_len_bds/bd_list->num_bds_table;
+				max_len_bds -= chain_bds;
+			}
+		} else {
+			/* there is a wrap in the ring within a xfr */
+			chain_bds = (bd_list->max_bdi - start_bdi)/
+							bd_list->num_bds_table;
+			chain_bds += short_bdi/bd_list->num_bds_table;
+			max_len_bds = bd_list->max_bdi - start_bdi;
+			max_len_bds += short_bdi;
+			max_len_bds -= chain_bds;
+		}
+		/* max_len_bds is the number of full length bds */
+		end_bdi = find_end_bdi(ep, bd_xfr->next_hwd_bdi);
+		if (!(end_bdi == short_bdi))
+			ep->ignore_next_sr = true;
+
+		actual_length = max_len_bds * BD_MAX_BUFF_SIZE;
+		short_bd = bdi_to_bd(ep, short_bdi);
+		/* length queued */
+		length_short = le32_to_cpu(short_bd->offset[2]) & 0x1FFFFF;
+		/* actual length trensfered */
+		length_short -= SR_BD_LEN(le32_to_cpu(sreport->offset[2]));
+		actual_length += length_short;
+		req->usb_req.actual = actual_length;
+	} else {
+		req->usb_req.actual = req->usb_req.length -
+			SR_BD_LEN(le32_to_cpu(sreport->offset[2]));
+		dev_dbg(bdc->dev,
+			"len=%d actual=%d bd_xfr->next_hwd_bdi:%d\n",
+			req->usb_req.length, req->usb_req.actual,
+			bd_xfr->next_hwd_bdi);
+	}
+
+	/* Update the dequeue pointer */
+	ep->bd_list.hwd_bdi = bd_xfr->next_hwd_bdi;
+	if (req->usb_req.actual < req->usb_req.length) {
+		dev_dbg(bdc->dev, "short xfr on %d\n", ep->ep_num);
+		if (req->usb_req.short_not_ok)
+			status = -EREMOTEIO;
+	}
+	bdc_req_complete(ep, bd_xfr->req, status);
+}
+
+/* EP0 setup related packet handlers */
+
+/*
+ * Setup packet received, just store the packet and process on next DS or SS
+ * started SR
+ */
+void bdc_xsf_ep0_setup_recv(struct bdc *bdc, struct bdc_sr *sreport)
+{
+	struct usb_ctrlrequest *setup_pkt;
+	u32 len;
+
+	dev_dbg(bdc->dev,
+		"%s ep0_state:%s\n",
+		__func__, ep0_state_string[bdc->ep0_state]);
+	/* Store received setup packet */
+	setup_pkt = &bdc->setup_pkt;
+	memcpy(setup_pkt, &sreport->offset[0], sizeof(*setup_pkt));
+	len = le16_to_cpu(setup_pkt->wLength);
+	if (!len)
+		bdc->ep0_state = WAIT_FOR_STATUS_START;
+	else
+		bdc->ep0_state = WAIT_FOR_DATA_START;
+
+
+	dev_dbg(bdc->dev,
+		"%s exit ep0_state:%s\n",
+		__func__, ep0_state_string[bdc->ep0_state]);
+}
+
+/* Stall ep0 */
+static void ep0_stall(struct bdc *bdc)
+{
+	struct bdc_ep	*ep = bdc->bdc_ep_array[1];
+	struct bdc_req *req;
+
+	dev_dbg(bdc->dev, "%s\n", __func__);
+	bdc->delayed_status = false;
+	ep_set_halt(ep, 1);
+
+	/* de-queue any pendig requests */
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct bdc_req,
+				queue);
+		bdc_req_complete(ep, req, -ESHUTDOWN);
+	}
+}
+
+/* SET_ADD handlers */
+static int ep0_set_address(struct bdc *bdc, struct usb_ctrlrequest *ctrl)
+{
+	enum usb_device_state state = bdc->gadget.state;
+	int ret = 0;
+	u32 addr;
+
+	addr = le16_to_cpu(ctrl->wValue);
+	dev_dbg(bdc->dev,
+		"%s addr:%d dev state:%d\n",
+		__func__, addr, state);
+
+	if (addr > 127)
+		return -EINVAL;
+
+	switch (state) {
+	case USB_STATE_DEFAULT:
+	case USB_STATE_ADDRESS:
+		/* Issue Address device command */
+		ret = bdc_address_device(bdc, addr);
+		if (ret)
+			return ret;
+
+		if (addr)
+			usb_gadget_set_state(&bdc->gadget, USB_STATE_ADDRESS);
+		else
+			usb_gadget_set_state(&bdc->gadget, USB_STATE_DEFAULT);
+
+		bdc->dev_addr = addr;
+		break;
+	default:
+		dev_warn(bdc->dev,
+			"SET Address in wrong device state %d\n",
+			state);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+/* Handler for SET/CLEAR FEATURE requests for device */
+static int ep0_handle_feature_dev(struct bdc *bdc, u16 wValue,
+							u16 wIndex, bool set)
+{
+	enum usb_device_state state = bdc->gadget.state;
+	u32	usppms = 0;
+
+	dev_dbg(bdc->dev, "%s set:%d dev state:%d\n",
+					__func__, set, state);
+	switch (wValue) {
+	case USB_DEVICE_REMOTE_WAKEUP:
+		dev_dbg(bdc->dev, "USB_DEVICE_REMOTE_WAKEUP\n");
+		if (set)
+			bdc->devstatus |= REMOTE_WAKE_ENABLE;
+		else
+			bdc->devstatus &= ~REMOTE_WAKE_ENABLE;
+		break;
+
+	case USB_DEVICE_TEST_MODE:
+		dev_dbg(bdc->dev, "USB_DEVICE_TEST_MODE\n");
+		if ((wIndex & 0xFF) ||
+				(bdc->gadget.speed != USB_SPEED_HIGH) || !set)
+			return -EINVAL;
+
+		bdc->test_mode = wIndex >> 8;
+		break;
+
+	case USB_DEVICE_U1_ENABLE:
+		dev_dbg(bdc->dev, "USB_DEVICE_U1_ENABLE\n");
+
+		if (bdc->gadget.speed != USB_SPEED_SUPER ||
+						state != USB_STATE_CONFIGURED)
+			return -EINVAL;
+
+		usppms =  bdc_readl(bdc->regs, BDC_USPPMS);
+		if (set) {
+			/* clear previous u1t */
+			usppms &= ~BDC_U1T(BDC_U1T_MASK);
+			usppms |= BDC_U1T(U1_TIMEOUT);
+			usppms |= BDC_U1E | BDC_PORT_W1S;
+			bdc->devstatus |= (1 << USB_DEV_STAT_U1_ENABLED);
+		} else {
+			usppms &= ~BDC_U1E;
+			usppms |= BDC_PORT_W1S;
+			bdc->devstatus &= ~(1 << USB_DEV_STAT_U1_ENABLED);
+		}
+		bdc_writel(bdc->regs, BDC_USPPMS, usppms);
+		break;
+
+	case USB_DEVICE_U2_ENABLE:
+		dev_dbg(bdc->dev, "USB_DEVICE_U2_ENABLE\n");
+
+		if (bdc->gadget.speed != USB_SPEED_SUPER ||
+						state != USB_STATE_CONFIGURED)
+			return -EINVAL;
+
+		usppms = bdc_readl(bdc->regs, BDC_USPPMS);
+		if (set) {
+			usppms |= BDC_U2E;
+			usppms |= BDC_U2A;
+			bdc->devstatus |= (1 << USB_DEV_STAT_U2_ENABLED);
+		} else {
+			usppms &= ~BDC_U2E;
+			usppms &= ~BDC_U2A;
+			bdc->devstatus &= ~(1 << USB_DEV_STAT_U2_ENABLED);
+		}
+		bdc_writel(bdc->regs, BDC_USPPMS, usppms);
+		break;
+
+	case USB_DEVICE_LTM_ENABLE:
+		dev_dbg(bdc->dev, "USB_DEVICE_LTM_ENABLE?\n");
+		if (bdc->gadget.speed != USB_SPEED_SUPER ||
+						state != USB_STATE_CONFIGURED)
+			return -EINVAL;
+		break;
+	default:
+		dev_err(bdc->dev, "Unknown wValue:%d\n", wValue);
+		return -EOPNOTSUPP;
+	} /* USB_RECIP_DEVICE end */
+
+	return 0;
+}
+
+/* SET/CLEAR FEATURE handler */
+static int ep0_handle_feature(struct bdc *bdc,
+			      struct usb_ctrlrequest *setup_pkt, bool set)
+{
+	enum usb_device_state state = bdc->gadget.state;
+	struct bdc_ep *ep;
+	u16 wValue;
+	u16 wIndex;
+	int epnum;
+
+	wValue = le16_to_cpu(setup_pkt->wValue);
+	wIndex = le16_to_cpu(setup_pkt->wIndex);
+
+	dev_dbg(bdc->dev,
+		"%s wValue=%d wIndex=%d	devstate=%08x speed=%d set=%d",
+		__func__, wValue, wIndex, state,
+		bdc->gadget.speed, set);
+
+	switch (setup_pkt->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		return ep0_handle_feature_dev(bdc, wValue, wIndex, set);
+	case USB_RECIP_INTERFACE:
+		dev_dbg(bdc->dev, "USB_RECIP_INTERFACE\n");
+		/* USB3 spec, sec 9.4.9 */
+		if (wValue != USB_INTRF_FUNC_SUSPEND)
+			return -EINVAL;
+		/* USB3 spec, Table 9-8 */
+		if (set) {
+			if (wIndex & USB_INTRF_FUNC_SUSPEND_RW) {
+				dev_dbg(bdc->dev, "SET REMOTE_WAKEUP\n");
+				bdc->devstatus |= REMOTE_WAKE_ENABLE;
+			} else {
+				dev_dbg(bdc->dev, "CLEAR REMOTE_WAKEUP\n");
+				bdc->devstatus &= ~REMOTE_WAKE_ENABLE;
+			}
+		}
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		dev_dbg(bdc->dev, "USB_RECIP_ENDPOINT\n");
+		if (wValue != USB_ENDPOINT_HALT)
+			return -EINVAL;
+
+		epnum = wIndex & USB_ENDPOINT_NUMBER_MASK;
+		if (epnum) {
+			if ((wIndex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
+				epnum = epnum * 2 + 1;
+			else
+				epnum *= 2;
+		} else {
+			epnum = 1; /*EP0*/
+		}
+		/*
+		 * If CLEAR_FEATURE on ep0 then don't do anything as the stall
+		 * condition on ep0 has already been cleared when SETUP packet
+		 * was received.
+		 */
+		if (epnum == 1 && !set) {
+			dev_dbg(bdc->dev, "ep0 stall already cleared\n");
+			return 0;
+		}
+		dev_dbg(bdc->dev, "epnum=%d\n", epnum);
+		ep = bdc->bdc_ep_array[epnum];
+		if (!ep)
+			return -EINVAL;
+
+		return ep_set_halt(ep, set);
+	default:
+		dev_err(bdc->dev, "Unknown recipient\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* GET_STATUS request handler */
+static int ep0_handle_status(struct bdc *bdc,
+			     struct usb_ctrlrequest *setup_pkt)
+{
+	enum usb_device_state state = bdc->gadget.state;
+	struct bdc_ep *ep;
+	u16 usb_status = 0;
+	u32 epnum;
+	u16 wIndex;
+
+	/* USB2.0 spec sec 9.4.5 */
+	if (state == USB_STATE_DEFAULT)
+		return -EINVAL;
+	wIndex = le16_to_cpu(setup_pkt->wIndex);
+	dev_dbg(bdc->dev, "%s\n", __func__);
+	usb_status = bdc->devstatus;
+	switch (setup_pkt->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		dev_dbg(bdc->dev,
+			"USB_RECIP_DEVICE devstatus:%08x\n",
+			bdc->devstatus);
+		/* USB3 spec, sec 9.4.5 */
+		if (bdc->gadget.speed == USB_SPEED_SUPER)
+			usb_status &= ~REMOTE_WAKE_ENABLE;
+		break;
+
+	case USB_RECIP_INTERFACE:
+		dev_dbg(bdc->dev, "USB_RECIP_INTERFACE\n");
+		if (bdc->gadget.speed == USB_SPEED_SUPER) {
+			/*
+			 * This should come from func for Func remote wkup
+			 * usb_status |=1;
+			 */
+			if (bdc->devstatus & REMOTE_WAKE_ENABLE)
+				usb_status |= REMOTE_WAKE_ENABLE;
+		} else {
+			usb_status = 0;
+		}
+
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		dev_dbg(bdc->dev, "USB_RECIP_ENDPOINT\n");
+		epnum = wIndex & USB_ENDPOINT_NUMBER_MASK;
+		if (epnum) {
+			if ((wIndex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
+				epnum = epnum*2 + 1;
+			else
+				epnum *= 2;
+		} else {
+			epnum = 1; /* EP0 */
+		}
+
+		ep = bdc->bdc_ep_array[epnum];
+		if (!ep) {
+			dev_err(bdc->dev, "ISSUE, GET_STATUS for invalid EP ?");
+			return -EINVAL;
+		}
+		if (ep->flags & BDC_EP_STALL)
+			usb_status |= 1 << USB_ENDPOINT_HALT;
+
+		break;
+	default:
+		dev_err(bdc->dev, "Unknown recipient for get_status\n");
+		return -EINVAL;
+	}
+	/* prepare a data stage for GET_STATUS */
+	dev_dbg(bdc->dev, "usb_status=%08x\n", usb_status);
+	*(__le16 *)bdc->ep0_response_buff = cpu_to_le16(usb_status);
+	bdc->ep0_req.usb_req.length = 2;
+	bdc->ep0_req.usb_req.buf = &bdc->ep0_response_buff;
+	ep0_queue_data_stage(bdc);
+
+	return 0;
+}
+
+static void ep0_set_sel_cmpl(struct usb_ep *_ep, struct usb_request *_req)
+{
+	/* ep0_set_sel_cmpl */
+}
+
+/* Queue data stage to handle 6 byte SET_SEL request */
+static int ep0_set_sel(struct bdc *bdc,
+			     struct usb_ctrlrequest *setup_pkt)
+{
+	struct bdc_ep	*ep;
+	u16	wLength;
+
+	dev_dbg(bdc->dev, "%s\n", __func__);
+	wLength = le16_to_cpu(setup_pkt->wLength);
+	if (unlikely(wLength != 6)) {
+		dev_err(bdc->dev, "%s Wrong wLength:%d\n", __func__, wLength);
+		return -EINVAL;
+	}
+	ep = bdc->bdc_ep_array[1];
+	bdc->ep0_req.ep = ep;
+	bdc->ep0_req.usb_req.length = 6;
+	bdc->ep0_req.usb_req.buf = bdc->ep0_response_buff;
+	bdc->ep0_req.usb_req.complete = ep0_set_sel_cmpl;
+	ep0_queue_data_stage(bdc);
+
+	return 0;
+}
+
+/*
+ * Queue a 0 byte bd only if wLength is more than the length and length is
+ * a multiple of MaxPacket then queue 0 byte BD
+ */
+static int ep0_queue_zlp(struct bdc *bdc)
+{
+	int ret;
+
+	dev_dbg(bdc->dev, "%s\n", __func__);
+	bdc->ep0_req.ep = bdc->bdc_ep_array[1];
+	bdc->ep0_req.usb_req.length = 0;
+	bdc->ep0_req.usb_req.complete = NULL;
+	bdc->ep0_state = WAIT_FOR_DATA_START;
+	ret = bdc_queue_xfr(bdc, &bdc->ep0_req);
+	if (ret) {
+		dev_err(bdc->dev, "err queueing zlp :%d\n", ret);
+		return ret;
+	}
+	bdc->ep0_state = WAIT_FOR_DATA_XMIT;
+
+	return 0;
+}
+
+/* Control request handler */
+static int handle_control_request(struct bdc *bdc)
+{
+	enum usb_device_state state = bdc->gadget.state;
+	struct usb_ctrlrequest *setup_pkt;
+	int delegate_setup = 0;
+	int ret = 0;
+	int config = 0;
+
+	setup_pkt = &bdc->setup_pkt;
+	dev_dbg(bdc->dev, "%s\n", __func__);
+	if ((setup_pkt->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (setup_pkt->bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			dev_dbg(bdc->dev, "USB_REQ_SET_ADDRESS\n");
+			ret = ep0_set_address(bdc, setup_pkt);
+			bdc->devstatus &= DEVSTATUS_CLEAR;
+			break;
+
+		case USB_REQ_SET_CONFIGURATION:
+			dev_dbg(bdc->dev, "USB_REQ_SET_CONFIGURATION\n");
+			if (state == USB_STATE_ADDRESS) {
+				usb_gadget_set_state(&bdc->gadget,
+							USB_STATE_CONFIGURED);
+			} else if (state == USB_STATE_CONFIGURED) {
+				/*
+				 * USB2 spec sec 9.4.7, if wValue is 0 then dev
+				 * is moved to addressed state
+				 */
+				config = le16_to_cpu(setup_pkt->wValue);
+				if (!config)
+					usb_gadget_set_state(
+							&bdc->gadget,
+							USB_STATE_ADDRESS);
+			}
+			delegate_setup = 1;
+			break;
+
+		case USB_REQ_SET_FEATURE:
+			dev_dbg(bdc->dev, "USB_REQ_SET_FEATURE\n");
+			ret = ep0_handle_feature(bdc, setup_pkt, 1);
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+			dev_dbg(bdc->dev, "USB_REQ_CLEAR_FEATURE\n");
+			ret = ep0_handle_feature(bdc, setup_pkt, 0);
+			break;
+
+		case USB_REQ_GET_STATUS:
+			dev_dbg(bdc->dev, "USB_REQ_GET_STATUS\n");
+			ret = ep0_handle_status(bdc, setup_pkt);
+			break;
+
+		case USB_REQ_SET_SEL:
+			dev_dbg(bdc->dev, "USB_REQ_SET_SEL\n");
+			ret = ep0_set_sel(bdc, setup_pkt);
+			break;
+
+		case USB_REQ_SET_ISOCH_DELAY:
+			dev_warn(bdc->dev,
+			"USB_REQ_SET_ISOCH_DELAY not handled\n");
+			ret = 0;
+			break;
+		default:
+			delegate_setup = 1;
+		}
+	} else {
+		delegate_setup = 1;
+	}
+
+	if (delegate_setup) {
+		spin_unlock(&bdc->lock);
+		ret = bdc->gadget_driver->setup(&bdc->gadget, setup_pkt);
+		spin_lock(&bdc->lock);
+	}
+
+	return ret;
+}
+
+/* EP0: Data stage started */
+void bdc_xsf_ep0_data_start(struct bdc *bdc, struct bdc_sr *sreport)
+{
+	struct bdc_ep *ep;
+	int ret = 0;
+
+	dev_dbg(bdc->dev, "%s\n", __func__);
+	ep = bdc->bdc_ep_array[1];
+	/* If ep0 was stalled, the clear it first */
+	if (ep->flags & BDC_EP_STALL) {
+		ret = ep_set_halt(ep, 0);
+		if (ret)
+			goto err;
+	}
+	if (bdc->ep0_state != WAIT_FOR_DATA_START)
+		dev_warn(bdc->dev,
+			"Data stage not expected ep0_state:%s\n",
+			ep0_state_string[bdc->ep0_state]);
+
+	ret = handle_control_request(bdc);
+	if (ret == USB_GADGET_DELAYED_STATUS) {
+		/*
+		 * The ep0 state will remain WAIT_FOR_DATA_START till
+		 * we received ep_queue on ep0
+		 */
+		bdc->delayed_status = true;
+		return;
+	}
+	if (!ret) {
+		bdc->ep0_state = WAIT_FOR_DATA_XMIT;
+		dev_dbg(bdc->dev,
+			"ep0_state:%s", ep0_state_string[bdc->ep0_state]);
+		return;
+	}
+err:
+	ep0_stall(bdc);
+}
+
+/* EP0: status stage started */
+void bdc_xsf_ep0_status_start(struct bdc *bdc, struct bdc_sr *sreport)
+{
+	struct usb_ctrlrequest *setup_pkt;
+	struct bdc_ep *ep;
+	int ret = 0;
+
+	dev_dbg(bdc->dev,
+		"%s ep0_state:%s",
+		__func__, ep0_state_string[bdc->ep0_state]);
+	ep = bdc->bdc_ep_array[1];
+
+	/* check if ZLP was queued? */
+	if (bdc->zlp_needed)
+		bdc->zlp_needed = false;
+
+	if (ep->flags & BDC_EP_STALL) {
+		ret = ep_set_halt(ep, 0);
+		if (ret)
+			goto err;
+	}
+
+	if ((bdc->ep0_state != WAIT_FOR_STATUS_START) &&
+				(bdc->ep0_state != WAIT_FOR_DATA_XMIT))
+		dev_err(bdc->dev,
+			"Status stage recv but ep0_state:%s\n",
+			ep0_state_string[bdc->ep0_state]);
+
+	/* check if data stage is in progress ? */
+	if (bdc->ep0_state == WAIT_FOR_DATA_XMIT) {
+		bdc->ep0_state = STATUS_PENDING;
+		/* Status stage will be queued upon Data stage transmit event */
+		dev_dbg(bdc->dev,
+			"status started but data  not transmitted yet\n");
+		return;
+	}
+	setup_pkt = &bdc->setup_pkt;
+
+	/*
+	 * 2 stage setup then only process the setup, for 3 stage setup the date
+	 * stage is already handled
+	 */
+	if (!le16_to_cpu(setup_pkt->wLength)) {
+		ret = handle_control_request(bdc);
+		if (ret == USB_GADGET_DELAYED_STATUS) {
+			bdc->delayed_status = true;
+			/* ep0_state will remain WAIT_FOR_STATUS_START */
+			return;
+		}
+	}
+	if (!ret) {
+		/* Queue a status stage BD */
+		ep0_queue_status_stage(bdc);
+		bdc->ep0_state = WAIT_FOR_STATUS_XMIT;
+		dev_dbg(bdc->dev,
+			"ep0_state:%s", ep0_state_string[bdc->ep0_state]);
+		return;
+	}
+err:
+	ep0_stall(bdc);
+}
+
+/* Helper function to update ep0 upon SR with xsf_succ or xsf_short */
+static void ep0_xsf_complete(struct bdc *bdc, struct bdc_sr *sreport)
+{
+	dev_dbg(bdc->dev, "%s\n", __func__);
+	switch (bdc->ep0_state) {
+	case WAIT_FOR_DATA_XMIT:
+		bdc->ep0_state = WAIT_FOR_STATUS_START;
+		break;
+	case WAIT_FOR_STATUS_XMIT:
+		bdc->ep0_state = WAIT_FOR_SETUP;
+		if (bdc->test_mode) {
+			int ret;
+
+			dev_dbg(bdc->dev, "test_mode:%d\n", bdc->test_mode);
+			ret = bdc_set_test_mode(bdc);
+			if (ret < 0) {
+				dev_err(bdc->dev, "Err in setting Test mode\n");
+				return;
+			}
+			bdc->test_mode = 0;
+		}
+		break;
+	case STATUS_PENDING:
+		bdc_xsf_ep0_status_start(bdc, sreport);
+		break;
+
+	default:
+		dev_err(bdc->dev,
+			"Unknown ep0_state:%s\n",
+			ep0_state_string[bdc->ep0_state]);
+
+	}
+}
+
+/* xfr completion status report handler */
+void bdc_sr_xsf(struct bdc *bdc, struct bdc_sr *sreport)
+{
+	struct bdc_ep *ep;
+	u32 sr_status;
+	u8 ep_num;
+
+	ep_num = (le32_to_cpu(sreport->offset[3])>>4) & 0x1f;
+	ep = bdc->bdc_ep_array[ep_num];
+	if (!ep || !(ep->flags & BDC_EP_ENABLED)) {
+		dev_err(bdc->dev, "xsf for ep not enabled\n");
+		return;
+	}
+	/*
+	 * check if this transfer is after link went from U3->U0 due
+	 * to remote wakeup
+	 */
+	if (bdc->devstatus & FUNC_WAKE_ISSUED) {
+		bdc->devstatus &= ~(FUNC_WAKE_ISSUED);
+		dev_dbg(bdc->dev, "%s clearing FUNC_WAKE_ISSUED flag\n",
+								__func__);
+	}
+	sr_status = XSF_STS(le32_to_cpu(sreport->offset[3]));
+	dev_dbg_ratelimited(bdc->dev, "%s sr_status=%d ep:%s\n",
+					__func__, sr_status, ep->name);
+
+	switch (sr_status) {
+	case XSF_SUCC:
+	case XSF_SHORT:
+		handle_xsr_succ_status(bdc, ep, sreport);
+		if (ep_num == 1)
+			ep0_xsf_complete(bdc, sreport);
+		break;
+
+	case XSF_SETUP_RECV:
+	case XSF_DATA_START:
+	case XSF_STATUS_START:
+		if (ep_num != 1) {
+			dev_err(bdc->dev,
+				"ep0 related packets on non ep0 endpoint");
+			return;
+		}
+		bdc->sr_xsf_ep0[sr_status - XSF_SETUP_RECV](bdc, sreport);
+		break;
+
+	case XSF_BABB:
+		if (ep_num == 1) {
+			dev_dbg(bdc->dev, "Babble on ep0 zlp_need:%d\n",
+							bdc->zlp_needed);
+			/*
+			 * If the last completed transfer had wLength >Data Len,
+			 * and Len is multiple of MaxPacket,then queue ZLP
+			 */
+			if (bdc->zlp_needed) {
+				/* queue 0 length bd */
+				ep0_queue_zlp(bdc);
+				return;
+			}
+		}
+		dev_warn(bdc->dev, "Babble on ep not handled\n");
+		break;
+	default:
+		dev_warn(bdc->dev, "sr status not handled:%x\n", sr_status);
+		break;
+	}
+}
+
+static int bdc_gadget_ep_queue(struct usb_ep *_ep,
+				struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct bdc_req *req;
+	unsigned long flags;
+	struct bdc_ep *ep;
+	struct bdc *bdc;
+	int ret;
+
+	if (!_ep || !_ep->desc)
+		return -ESHUTDOWN;
+
+	if (!_req || !_req->complete || !_req->buf)
+		return -EINVAL;
+
+	ep = to_bdc_ep(_ep);
+	req = to_bdc_req(_req);
+	bdc = ep->bdc;
+	dev_dbg(bdc->dev, "%s ep:%p req:%p\n", __func__, ep, req);
+	dev_dbg(bdc->dev, "queuing request %p to %s length %d zero:%d\n",
+				_req, ep->name, _req->length, _req->zero);
+
+	if (!ep->usb_ep.desc) {
+		dev_warn(bdc->dev,
+			"trying to queue req %p to disabled %s\n",
+			_req, ep->name);
+		return -ESHUTDOWN;
+	}
+
+	if (_req->length > MAX_XFR_LEN) {
+		dev_warn(bdc->dev,
+			"req length > supported MAX:%d requested:%d\n",
+			MAX_XFR_LEN, _req->length);
+		return -EOPNOTSUPP;
+	}
+	spin_lock_irqsave(&bdc->lock, flags);
+	if (ep == bdc->bdc_ep_array[1])
+		ret = ep0_queue(ep, req);
+	else
+		ret = ep_queue(ep, req);
+
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	return ret;
+}
+
+static int bdc_gadget_ep_dequeue(struct usb_ep *_ep,
+				  struct usb_request *_req)
+{
+	struct bdc_req *req;
+	struct bdc_req *iter;
+	unsigned long flags;
+	struct bdc_ep *ep;
+	struct bdc *bdc;
+	int ret;
+
+	if (!_ep || !_req)
+		return -EINVAL;
+
+	ep = to_bdc_ep(_ep);
+	req = to_bdc_req(_req);
+	bdc = ep->bdc;
+	dev_dbg(bdc->dev, "%s ep:%s req:%p\n", __func__, ep->name, req);
+	bdc_dbg_bd_list(bdc, ep);
+	spin_lock_irqsave(&bdc->lock, flags);
+
+	req = NULL;
+	/* make sure it's still queued on this endpoint */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->usb_req != _req)
+			continue;
+		req = iter;
+		break;
+	}
+	if (!req) {
+		spin_unlock_irqrestore(&bdc->lock, flags);
+		dev_err(bdc->dev, "usb_req !=req n");
+		return -EINVAL;
+	}
+	ret = ep_dequeue(ep, req);
+	if (ret) {
+		ret = -EOPNOTSUPP;
+		goto err;
+	}
+	bdc_req_complete(ep, req, -ECONNRESET);
+
+err:
+	bdc_dbg_bd_list(bdc, ep);
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	return ret;
+}
+
+static int bdc_gadget_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	unsigned long flags;
+	struct bdc_ep *ep;
+	struct bdc *bdc;
+	int ret;
+
+	ep = to_bdc_ep(_ep);
+	bdc = ep->bdc;
+	dev_dbg(bdc->dev, "%s ep:%s value=%d\n", __func__, ep->name, value);
+	spin_lock_irqsave(&bdc->lock, flags);
+	if (usb_endpoint_xfer_isoc(ep->usb_ep.desc))
+		ret = -EINVAL;
+	else if (!list_empty(&ep->queue))
+		ret = -EAGAIN;
+	else
+		ret = ep_set_halt(ep, value);
+
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	return ret;
+}
+
+static struct usb_request *bdc_gadget_alloc_request(struct usb_ep *_ep,
+						     gfp_t gfp_flags)
+{
+	struct bdc_req *req;
+	struct bdc_ep *ep;
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	ep = to_bdc_ep(_ep);
+	req->ep = ep;
+	req->epnum = ep->ep_num;
+	req->usb_req.dma = DMA_ADDR_INVALID;
+	dev_dbg(ep->bdc->dev, "%s ep:%s req:%p\n", __func__, ep->name, req);
+
+	return &req->usb_req;
+}
+
+static void bdc_gadget_free_request(struct usb_ep *_ep,
+				     struct usb_request *_req)
+{
+	struct bdc_req *req;
+
+	req = to_bdc_req(_req);
+	kfree(req);
+}
+
+/* endpoint operations */
+
+/* configure endpoint and also allocate resources */
+static int bdc_gadget_ep_enable(struct usb_ep *_ep,
+				 const struct usb_endpoint_descriptor *desc)
+{
+	unsigned long flags;
+	struct bdc_ep *ep;
+	struct bdc *bdc;
+	int ret;
+
+	if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
+		pr_debug("%s invalid parameters\n", __func__);
+		return -EINVAL;
+	}
+
+	if (!desc->wMaxPacketSize) {
+		pr_debug("%s missing wMaxPacketSize\n", __func__);
+		return -EINVAL;
+	}
+
+	ep = to_bdc_ep(_ep);
+	bdc = ep->bdc;
+
+	/* Sanity check, upper layer will not send enable for ep0 */
+	if (ep == bdc->bdc_ep_array[1])
+		return -EINVAL;
+
+	if (!bdc->gadget_driver
+	    || bdc->gadget.speed == USB_SPEED_UNKNOWN) {
+		return -ESHUTDOWN;
+	}
+
+	dev_dbg(bdc->dev, "%s Enabling %s\n", __func__, ep->name);
+	spin_lock_irqsave(&bdc->lock, flags);
+	ep->desc = desc;
+	ep->comp_desc = _ep->comp_desc;
+	ret = bdc_ep_enable(ep);
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	return ret;
+}
+
+static int bdc_gadget_ep_disable(struct usb_ep *_ep)
+{
+	unsigned long flags;
+	struct bdc_ep *ep;
+	struct bdc *bdc;
+	int ret;
+
+	if (!_ep) {
+		pr_debug("bdc: invalid parameters\n");
+		return -EINVAL;
+	}
+	ep = to_bdc_ep(_ep);
+	bdc = ep->bdc;
+
+	/* Upper layer will not call this for ep0, but do a sanity check */
+	if (ep == bdc->bdc_ep_array[1]) {
+		dev_warn(bdc->dev, "%s called for ep0\n", __func__);
+		return -EINVAL;
+	}
+	dev_dbg(bdc->dev,
+		"%s() ep:%s ep->flags:%08x\n",
+		__func__, ep->name, ep->flags);
+
+	if (!(ep->flags & BDC_EP_ENABLED)) {
+		if (bdc->gadget.speed != USB_SPEED_UNKNOWN)
+			dev_warn(bdc->dev, "%s is already disabled\n",
+				 ep->name);
+		return 0;
+	}
+	spin_lock_irqsave(&bdc->lock, flags);
+	ret = bdc_ep_disable(ep);
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	return ret;
+}
+
+static const struct usb_ep_ops bdc_gadget_ep_ops = {
+	.enable = bdc_gadget_ep_enable,
+	.disable = bdc_gadget_ep_disable,
+	.alloc_request = bdc_gadget_alloc_request,
+	.free_request = bdc_gadget_free_request,
+	.queue = bdc_gadget_ep_queue,
+	.dequeue = bdc_gadget_ep_dequeue,
+	.set_halt = bdc_gadget_ep_set_halt
+};
+
+/* dir = 1 is IN */
+static int init_ep(struct bdc *bdc, u32 epnum, u32 dir)
+{
+	struct bdc_ep *ep;
+
+	dev_dbg(bdc->dev, "%s epnum=%d dir=%d\n", __func__, epnum, dir);
+	ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+	if (!ep)
+		return -ENOMEM;
+
+	ep->bdc = bdc;
+	ep->dir = dir;
+
+	if (dir)
+		ep->usb_ep.caps.dir_in = true;
+	else
+		ep->usb_ep.caps.dir_out = true;
+
+	/* ep->ep_num is the index inside bdc_ep */
+	if (epnum == 1) {
+		ep->ep_num = 1;
+		bdc->bdc_ep_array[ep->ep_num] = ep;
+		snprintf(ep->name, sizeof(ep->name), "ep%d", epnum - 1);
+		usb_ep_set_maxpacket_limit(&ep->usb_ep, EP0_MAX_PKT_SIZE);
+		ep->usb_ep.caps.type_control = true;
+		ep->comp_desc = NULL;
+		bdc->gadget.ep0 = &ep->usb_ep;
+	} else {
+		if (dir)
+			ep->ep_num = epnum * 2 - 1;
+		else
+			ep->ep_num = epnum * 2 - 2;
+
+		bdc->bdc_ep_array[ep->ep_num] = ep;
+		snprintf(ep->name, sizeof(ep->name), "ep%d%s", epnum - 1,
+			 dir & 1 ? "in" : "out");
+
+		usb_ep_set_maxpacket_limit(&ep->usb_ep, 1024);
+		ep->usb_ep.caps.type_iso = true;
+		ep->usb_ep.caps.type_bulk = true;
+		ep->usb_ep.caps.type_int = true;
+		ep->usb_ep.max_streams = 0;
+		list_add_tail(&ep->usb_ep.ep_list, &bdc->gadget.ep_list);
+	}
+	ep->usb_ep.ops = &bdc_gadget_ep_ops;
+	ep->usb_ep.name = ep->name;
+	ep->flags = 0;
+	ep->ignore_next_sr = false;
+	dev_dbg(bdc->dev, "ep=%p ep->usb_ep.name=%s epnum=%d ep->epnum=%d\n",
+				ep, ep->usb_ep.name, epnum, ep->ep_num);
+
+	INIT_LIST_HEAD(&ep->queue);
+
+	return 0;
+}
+
+/* Init all ep */
+int bdc_init_ep(struct bdc *bdc)
+{
+	u8 epnum;
+	int ret;
+
+	dev_dbg(bdc->dev, "%s()\n", __func__);
+	INIT_LIST_HEAD(&bdc->gadget.ep_list);
+	/* init ep0 */
+	ret = init_ep(bdc, 1, 0);
+	if (ret) {
+		dev_err(bdc->dev, "init ep ep0 fail %d\n", ret);
+		return ret;
+	}
+
+	for (epnum = 2; epnum <= bdc->num_eps / 2; epnum++) {
+		/* OUT */
+		ret = init_ep(bdc, epnum, 0);
+		if (ret) {
+			dev_err(bdc->dev,
+				"init ep failed for:%d error: %d\n",
+				epnum, ret);
+			return ret;
+		}
+
+		/* IN */
+		ret = init_ep(bdc, epnum, 1);
+		if (ret) {
+			dev_err(bdc->dev,
+				"init ep failed for:%d error: %d\n",
+				epnum, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.h b/drivers/usb/gadget/udc/bdc/bdc_ep.h
new file mode 100644
index 000000000..4d3affd07
--- /dev/null
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * bdc_ep.h - header for the BDC debug functions
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * Author: Ashwini Pahuja
+ */
+#ifndef __LINUX_BDC_EP_H__
+#define __LINUX_BDC_EP_H__
+
+int bdc_init_ep(struct bdc *bdc);
+int bdc_ep_disable(struct bdc_ep *ep);
+int bdc_ep_enable(struct bdc_ep *ep);
+void bdc_free_ep(struct bdc *bdc);
+
+#endif /* __LINUX_BDC_EP_H__ */
diff --git a/drivers/usb/gadget/udc/bdc/bdc_udc.c b/drivers/usb/gadget/udc/bdc/bdc_udc.c
new file mode 100644
index 000000000..53ffaf4e2
--- /dev/null
+++ b/drivers/usb/gadget/udc/bdc/bdc_udc.c
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * bdc_udc.c - BRCM BDC USB3.0 device controller gagdet ops
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * Author: Ashwini Pahuja
+ *
+ * Based on drivers under drivers/usb/gadget/udc/
+ */
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <asm/unaligned.h>
+#include <linux/platform_device.h>
+
+#include "bdc.h"
+#include "bdc_ep.h"
+#include "bdc_cmd.h"
+#include "bdc_dbg.h"
+
+static const struct usb_gadget_ops bdc_gadget_ops;
+
+static const char * const conn_speed_str[] =  {
+	"Not connected",
+	"Full Speed",
+	"Low Speed",
+	"High Speed",
+	"Super Speed",
+};
+
+/* EP0 initial descripror */
+static struct usb_endpoint_descriptor bdc_gadget_ep0_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+	.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+	.bEndpointAddress = 0,
+	.wMaxPacketSize	= cpu_to_le16(EP0_MAX_PKT_SIZE),
+};
+
+/* Advance the srr dqp maintained by SW */
+static void srr_dqp_index_advc(struct bdc *bdc, u32 srr_num)
+{
+	struct srr *srr;
+
+	srr = &bdc->srr;
+	dev_dbg_ratelimited(bdc->dev, "srr->dqp_index:%d\n", srr->dqp_index);
+	srr->dqp_index++;
+	/* rollback to 0 if we are past the last */
+	if (srr->dqp_index == NUM_SR_ENTRIES)
+		srr->dqp_index = 0;
+}
+
+/* connect sr */
+static void bdc_uspc_connected(struct bdc *bdc)
+{
+	u32 speed, temp;
+	u32 usppms;
+	int ret;
+
+	temp = bdc_readl(bdc->regs, BDC_USPC);
+	speed = BDC_PSP(temp);
+	dev_dbg(bdc->dev, "%s speed=%x\n", __func__, speed);
+	switch (speed) {
+	case BDC_SPEED_SS:
+		bdc_gadget_ep0_desc.wMaxPacketSize =
+						cpu_to_le16(EP0_MAX_PKT_SIZE);
+		bdc->gadget.ep0->maxpacket = EP0_MAX_PKT_SIZE;
+		bdc->gadget.speed = USB_SPEED_SUPER;
+		/* Enable U1T in SS mode */
+		usppms =  bdc_readl(bdc->regs, BDC_USPPMS);
+		usppms &= ~BDC_U1T(0xff);
+		usppms |= BDC_U1T(U1_TIMEOUT);
+		usppms |= BDC_PORT_W1S;
+		bdc_writel(bdc->regs, BDC_USPPMS, usppms);
+		break;
+
+	case BDC_SPEED_HS:
+		bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
+		bdc->gadget.ep0->maxpacket = 64;
+		bdc->gadget.speed = USB_SPEED_HIGH;
+		break;
+
+	case BDC_SPEED_FS:
+		bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
+		bdc->gadget.ep0->maxpacket = 64;
+		bdc->gadget.speed = USB_SPEED_FULL;
+		break;
+
+	case BDC_SPEED_LS:
+		bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
+		bdc->gadget.ep0->maxpacket = 8;
+		bdc->gadget.speed = USB_SPEED_LOW;
+		break;
+	default:
+		dev_err(bdc->dev, "UNDEFINED SPEED\n");
+		return;
+	}
+	dev_dbg(bdc->dev, "connected at %s\n", conn_speed_str[speed]);
+	/* Now we know the speed, configure ep0 */
+	bdc->bdc_ep_array[1]->desc = &bdc_gadget_ep0_desc;
+	ret = bdc_config_ep(bdc, bdc->bdc_ep_array[1]);
+	if (ret)
+		dev_err(bdc->dev, "EP0 config failed\n");
+	bdc->bdc_ep_array[1]->usb_ep.desc = &bdc_gadget_ep0_desc;
+	bdc->bdc_ep_array[1]->flags |= BDC_EP_ENABLED;
+	usb_gadget_set_state(&bdc->gadget, USB_STATE_DEFAULT);
+}
+
+/* device got disconnected */
+static void bdc_uspc_disconnected(struct bdc *bdc, bool reinit)
+{
+	struct bdc_ep *ep;
+
+	dev_dbg(bdc->dev, "%s\n", __func__);
+	/*
+	 * Only stop ep0 from here, rest of the endpoints will be disabled
+	 * from gadget_disconnect
+	 */
+	ep = bdc->bdc_ep_array[1];
+	if (ep && (ep->flags & BDC_EP_ENABLED))
+		/* if enabled then stop and remove requests */
+		bdc_ep_disable(ep);
+
+	if (bdc->gadget_driver && bdc->gadget_driver->disconnect) {
+		spin_unlock(&bdc->lock);
+		bdc->gadget_driver->disconnect(&bdc->gadget);
+		spin_lock(&bdc->lock);
+	}
+	/* Set Unknown speed */
+	bdc->gadget.speed = USB_SPEED_UNKNOWN;
+	bdc->devstatus &= DEVSTATUS_CLEAR;
+	bdc->delayed_status = false;
+	bdc->reinit = reinit;
+	bdc->test_mode = false;
+	usb_gadget_set_state(&bdc->gadget, USB_STATE_NOTATTACHED);
+}
+
+/* TNotify wkaeup timer */
+static void bdc_func_wake_timer(struct work_struct *work)
+{
+	struct bdc *bdc = container_of(work, struct bdc, func_wake_notify.work);
+	unsigned long flags;
+
+	dev_dbg(bdc->dev, "%s\n", __func__);
+	spin_lock_irqsave(&bdc->lock, flags);
+	/*
+	 * Check if host has started transferring on endpoints
+	 * FUNC_WAKE_ISSUED is cleared when transfer has started after resume
+	 */
+	if (bdc->devstatus & FUNC_WAKE_ISSUED) {
+		dev_dbg(bdc->dev, "FUNC_WAKE_ISSUED FLAG IS STILL SET\n");
+		/* flag is still set, so again send func wake */
+		bdc_function_wake_fh(bdc, 0);
+		schedule_delayed_work(&bdc->func_wake_notify,
+						msecs_to_jiffies(BDC_TNOTIFY));
+	}
+	spin_unlock_irqrestore(&bdc->lock, flags);
+}
+
+/* handler for Link state change condition */
+static void handle_link_state_change(struct bdc *bdc, u32 uspc)
+{
+	u32 link_state;
+
+	dev_dbg(bdc->dev, "Link state change");
+	link_state = BDC_PST(uspc);
+	switch (link_state) {
+	case BDC_LINK_STATE_U3:
+		if ((bdc->gadget.speed != USB_SPEED_UNKNOWN) &&
+						bdc->gadget_driver->suspend) {
+			dev_dbg(bdc->dev, "Entered Suspend mode\n");
+			spin_unlock(&bdc->lock);
+			bdc->devstatus |= DEVICE_SUSPENDED;
+			bdc->gadget_driver->suspend(&bdc->gadget);
+			spin_lock(&bdc->lock);
+		}
+		break;
+	case BDC_LINK_STATE_U0:
+		if (bdc->devstatus & REMOTE_WAKEUP_ISSUED) {
+			bdc->devstatus &= ~REMOTE_WAKEUP_ISSUED;
+			if (bdc->gadget.speed == USB_SPEED_SUPER) {
+				bdc_function_wake_fh(bdc, 0);
+				bdc->devstatus |= FUNC_WAKE_ISSUED;
+				/*
+				 * Start a Notification timer and check if the
+				 * Host transferred anything on any of the EPs,
+				 * if not then send function wake again every
+				 * TNotification secs until host initiates
+				 * transfer to BDC, USB3 spec Table 8.13
+				 */
+				schedule_delayed_work(
+						&bdc->func_wake_notify,
+						msecs_to_jiffies(BDC_TNOTIFY));
+				dev_dbg(bdc->dev, "sched func_wake_notify\n");
+			}
+		}
+		break;
+
+	case BDC_LINK_STATE_RESUME:
+		dev_dbg(bdc->dev, "Resumed from Suspend\n");
+		if (bdc->devstatus & DEVICE_SUSPENDED) {
+			bdc->gadget_driver->resume(&bdc->gadget);
+			bdc->devstatus &= ~DEVICE_SUSPENDED;
+		}
+		break;
+	default:
+		dev_dbg(bdc->dev, "link state:%d\n", link_state);
+	}
+}
+
+/* something changes on upstream port, handle it here */
+void bdc_sr_uspc(struct bdc *bdc, struct bdc_sr *sreport)
+{
+	u32 clear_flags = 0;
+	u32 uspc;
+	bool connected = false;
+	bool disconn = false;
+
+	uspc = bdc_readl(bdc->regs, BDC_USPC);
+	dev_dbg(bdc->dev, "%s uspc=0x%08x\n", __func__, uspc);
+
+	/* Port connect changed */
+	if (uspc & BDC_PCC) {
+		/* Vbus not present, and not connected to Downstream port */
+		if ((uspc & BDC_VBC) && !(uspc & BDC_VBS) && !(uspc & BDC_PCS))
+			disconn = true;
+		else if ((uspc & BDC_PCS) && !BDC_PST(uspc))
+			connected = true;
+		clear_flags |= BDC_PCC;
+	}
+
+	/* Change in VBus and VBus is present */
+	if ((uspc & BDC_VBC) && (uspc & BDC_VBS)) {
+		if (bdc->pullup) {
+			dev_dbg(bdc->dev, "Do a softconnect\n");
+			/* Attached state, do a softconnect */
+			bdc_softconn(bdc);
+			usb_gadget_set_state(&bdc->gadget, USB_STATE_POWERED);
+		}
+		clear_flags |= BDC_VBC;
+	} else if ((uspc & BDC_PRS) || (uspc & BDC_PRC) || disconn) {
+		/* Hot reset, warm reset, 2.0 bus reset or disconn */
+		dev_dbg(bdc->dev, "Port reset or disconn\n");
+		bdc_uspc_disconnected(bdc, disconn);
+		clear_flags |= BDC_PRC;
+	} else if ((uspc & BDC_PSC) && (uspc & BDC_PCS)) {
+		/* Change in Link state */
+		handle_link_state_change(bdc, uspc);
+		clear_flags |= BDC_PSC;
+	}
+
+	/*
+	 * In SS we might not have PRC bit set before connection, but in 2.0
+	 * the PRC bit is set before connection, so moving this condition out
+	 * of bus reset to handle both SS/2.0 speeds.
+	 */
+	if (connected) {
+		/* This is the connect event for U0/L0 */
+		dev_dbg(bdc->dev, "Connected\n");
+		bdc_uspc_connected(bdc);
+		bdc->devstatus &= ~(DEVICE_SUSPENDED);
+	}
+	uspc = bdc_readl(bdc->regs, BDC_USPC);
+	uspc &= (~BDC_USPSC_RW);
+	dev_dbg(bdc->dev, "uspc=%x\n", uspc);
+	bdc_writel(bdc->regs, BDC_USPC, clear_flags);
+}
+
+/* Main interrupt handler for bdc */
+static irqreturn_t bdc_udc_interrupt(int irq, void *_bdc)
+{
+	u32 eqp_index, dqp_index, sr_type, srr_int;
+	struct bdc_sr *sreport;
+	struct bdc *bdc = _bdc;
+	u32 status;
+	int ret;
+
+	spin_lock(&bdc->lock);
+	status = bdc_readl(bdc->regs, BDC_BDCSC);
+	if (!(status & BDC_GIP)) {
+		spin_unlock(&bdc->lock);
+		return IRQ_NONE;
+	}
+	srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0));
+	/* Check if the SRR IP bit it set? */
+	if (!(srr_int & BDC_SRR_IP)) {
+		dev_warn(bdc->dev, "Global irq pending but SRR IP is 0\n");
+		spin_unlock(&bdc->lock);
+		return IRQ_NONE;
+	}
+	eqp_index = BDC_SRR_EPI(srr_int);
+	dqp_index = BDC_SRR_DPI(srr_int);
+	dev_dbg(bdc->dev,
+			"%s eqp_index=%d dqp_index=%d  srr.dqp_index=%d\n\n",
+			 __func__, eqp_index, dqp_index, bdc->srr.dqp_index);
+
+	/* check for ring empty condition */
+	if (eqp_index == dqp_index) {
+		dev_dbg(bdc->dev, "SRR empty?\n");
+		spin_unlock(&bdc->lock);
+		return IRQ_HANDLED;
+	}
+
+	while (bdc->srr.dqp_index != eqp_index) {
+		sreport = &bdc->srr.sr_bds[bdc->srr.dqp_index];
+		/* sreport is read before using it */
+		rmb();
+		sr_type = le32_to_cpu(sreport->offset[3]) & BD_TYPE_BITMASK;
+		dev_dbg_ratelimited(bdc->dev, "sr_type=%d\n", sr_type);
+		switch (sr_type) {
+		case SR_XSF:
+			bdc->sr_handler[0](bdc, sreport);
+			break;
+
+		case SR_USPC:
+			bdc->sr_handler[1](bdc, sreport);
+			break;
+		default:
+			dev_warn(bdc->dev, "SR:%d not handled\n", sr_type);
+		}
+		/* Advance the srr dqp index */
+		srr_dqp_index_advc(bdc, 0);
+	}
+	/* update the hw dequeue pointer */
+	srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0));
+	srr_int &= ~BDC_SRR_DPI_MASK;
+	srr_int &= ~(BDC_SRR_RWS|BDC_SRR_RST|BDC_SRR_ISR);
+	srr_int |= ((bdc->srr.dqp_index) << 16);
+	srr_int |= BDC_SRR_IP;
+	bdc_writel(bdc->regs, BDC_SRRINT(0), srr_int);
+	srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0));
+	if (bdc->reinit) {
+		ret = bdc_reinit(bdc);
+		if (ret)
+			dev_err(bdc->dev, "err in bdc reinit\n");
+	}
+
+	spin_unlock(&bdc->lock);
+
+	return IRQ_HANDLED;
+}
+
+/* Gadget ops */
+static int bdc_udc_start(struct usb_gadget *gadget,
+				struct usb_gadget_driver *driver)
+{
+	struct bdc *bdc = gadget_to_bdc(gadget);
+	unsigned long flags;
+	int ret = 0;
+
+	dev_dbg(bdc->dev, "%s()\n", __func__);
+	spin_lock_irqsave(&bdc->lock, flags);
+	if (bdc->gadget_driver) {
+		dev_err(bdc->dev, "%s is already bound to %s\n",
+			bdc->gadget.name,
+			bdc->gadget_driver->driver.name);
+		ret = -EBUSY;
+		goto err;
+	}
+	/*
+	 * Run the controller from here and when BDC is connected to
+	 * Host then driver will receive a USPC SR with VBUS present
+	 * and then driver will do a softconnect.
+	 */
+	ret = bdc_run(bdc);
+	if (ret) {
+		dev_err(bdc->dev, "%s bdc run fail\n", __func__);
+		goto err;
+	}
+	bdc->gadget_driver = driver;
+	bdc->gadget.dev.driver = &driver->driver;
+err:
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	return ret;
+}
+
+static int bdc_udc_stop(struct usb_gadget *gadget)
+{
+	struct bdc *bdc = gadget_to_bdc(gadget);
+	unsigned long flags;
+
+	dev_dbg(bdc->dev, "%s()\n", __func__);
+	spin_lock_irqsave(&bdc->lock, flags);
+	bdc_stop(bdc);
+	bdc->gadget_driver = NULL;
+	bdc->gadget.dev.driver = NULL;
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	return 0;
+}
+
+static int bdc_udc_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct bdc *bdc = gadget_to_bdc(gadget);
+	unsigned long flags;
+	u32 uspc;
+
+	dev_dbg(bdc->dev, "%s() is_on:%d\n", __func__, is_on);
+	if (!gadget)
+		return -EINVAL;
+
+	spin_lock_irqsave(&bdc->lock, flags);
+	if (!is_on) {
+		bdc_softdisconn(bdc);
+		bdc->pullup = false;
+	} else {
+		/*
+		 * For a self powered device, we need to wait till we receive
+		 * a VBUS change and Vbus present event, then if pullup flag
+		 * is set, then only we present the Termintation.
+		 */
+		bdc->pullup = true;
+		/*
+		 * Check if BDC is already connected to Host i.e Vbus=1,
+		 * if yes, then present TERM now, this is typical for bus
+		 * powered devices.
+		 */
+		uspc = bdc_readl(bdc->regs, BDC_USPC);
+		if (uspc & BDC_VBS)
+			bdc_softconn(bdc);
+	}
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	return 0;
+}
+
+static int bdc_udc_set_selfpowered(struct usb_gadget *gadget,
+		int is_self)
+{
+	struct bdc		*bdc = gadget_to_bdc(gadget);
+	unsigned long           flags;
+
+	dev_dbg(bdc->dev, "%s()\n", __func__);
+	gadget->is_selfpowered = (is_self != 0);
+	spin_lock_irqsave(&bdc->lock, flags);
+	if (!is_self)
+		bdc->devstatus |= 1 << USB_DEVICE_SELF_POWERED;
+	else
+		bdc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
+
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	return 0;
+}
+
+static int bdc_udc_wakeup(struct usb_gadget *gadget)
+{
+	struct bdc *bdc = gadget_to_bdc(gadget);
+	unsigned long		flags;
+	u8	link_state;
+	u32	uspc;
+	int ret = 0;
+
+	dev_dbg(bdc->dev,
+		"%s() bdc->devstatus=%08x\n",
+		__func__, bdc->devstatus);
+
+	if (!(bdc->devstatus & REMOTE_WAKE_ENABLE))
+		return  -EOPNOTSUPP;
+
+	spin_lock_irqsave(&bdc->lock, flags);
+	uspc = bdc_readl(bdc->regs, BDC_USPC);
+	link_state = BDC_PST(uspc);
+	dev_dbg(bdc->dev, "link_state =%d portsc=%x", link_state, uspc);
+	if (link_state != BDC_LINK_STATE_U3) {
+		dev_warn(bdc->dev,
+			"can't wakeup from link state %d\n",
+			link_state);
+		ret = -EINVAL;
+		goto out;
+	}
+	if (bdc->gadget.speed == USB_SPEED_SUPER)
+		bdc->devstatus |= REMOTE_WAKEUP_ISSUED;
+
+	uspc &= ~BDC_PST_MASK;
+	uspc &= (~BDC_USPSC_RW);
+	uspc |=  BDC_PST(BDC_LINK_STATE_U0);
+	uspc |=  BDC_SWS;
+	bdc_writel(bdc->regs, BDC_USPC, uspc);
+	uspc = bdc_readl(bdc->regs, BDC_USPC);
+	link_state = BDC_PST(uspc);
+	dev_dbg(bdc->dev, "link_state =%d portsc=%x", link_state, uspc);
+out:
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	return ret;
+}
+
+static const struct usb_gadget_ops bdc_gadget_ops = {
+	.wakeup = bdc_udc_wakeup,
+	.set_selfpowered = bdc_udc_set_selfpowered,
+	.pullup = bdc_udc_pullup,
+	.udc_start = bdc_udc_start,
+	.udc_stop = bdc_udc_stop,
+};
+
+/* Init the gadget interface and register the udc */
+int bdc_udc_init(struct bdc *bdc)
+{
+	u32 temp;
+	int ret;
+
+	dev_dbg(bdc->dev, "%s()\n", __func__);
+	bdc->gadget.ops = &bdc_gadget_ops;
+	bdc->gadget.max_speed = USB_SPEED_SUPER;
+	bdc->gadget.speed = USB_SPEED_UNKNOWN;
+	bdc->gadget.dev.parent = bdc->dev;
+
+	bdc->gadget.sg_supported = false;
+
+
+	bdc->gadget.name = BRCM_BDC_NAME;
+	ret = devm_request_irq(bdc->dev, bdc->irq, bdc_udc_interrupt,
+				IRQF_SHARED, BRCM_BDC_NAME, bdc);
+	if (ret) {
+		dev_err(bdc->dev,
+			"failed to request irq #%d %d\n",
+			bdc->irq, ret);
+		return ret;
+	}
+
+	ret = bdc_init_ep(bdc);
+	if (ret) {
+		dev_err(bdc->dev, "bdc init ep fail: %d\n", ret);
+		return ret;
+	}
+
+	ret = usb_add_gadget_udc(bdc->dev, &bdc->gadget);
+	if (ret) {
+		dev_err(bdc->dev, "failed to register udc\n");
+		goto err0;
+	}
+	usb_gadget_set_state(&bdc->gadget, USB_STATE_NOTATTACHED);
+	bdc->bdc_ep_array[1]->desc = &bdc_gadget_ep0_desc;
+	/*
+	 * Allocate bd list for ep0 only, ep0 will be enabled on connect
+	 * status report when the speed is known
+	 */
+	ret = bdc_ep_enable(bdc->bdc_ep_array[1]);
+	if (ret) {
+		dev_err(bdc->dev, "fail to enable %s\n",
+						bdc->bdc_ep_array[1]->name);
+		goto err1;
+	}
+	INIT_DELAYED_WORK(&bdc->func_wake_notify, bdc_func_wake_timer);
+	/* Enable Interrupts */
+	temp = bdc_readl(bdc->regs, BDC_BDCSC);
+	temp |= BDC_GIE;
+	bdc_writel(bdc->regs, BDC_BDCSC, temp);
+	return 0;
+err1:
+	usb_del_gadget_udc(&bdc->gadget);
+err0:
+	bdc_free_ep(bdc);
+
+	return ret;
+}
+
+void bdc_udc_exit(struct bdc *bdc)
+{
+	unsigned long flags;
+
+	dev_dbg(bdc->dev, "%s()\n", __func__);
+	spin_lock_irqsave(&bdc->lock, flags);
+	bdc_ep_disable(bdc->bdc_ep_array[1]);
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	usb_del_gadget_udc(&bdc->gadget);
+	bdc_free_ep(bdc);
+}
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
new file mode 100644
index 000000000..c40f2ecbe
--- /dev/null
+++ b/drivers/usb/gadget/udc/core.c
@@ -0,0 +1,1877 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * udc.c - Core UDC Framework
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Felipe Balbi <balbi@ti.com>
+ */
+
+#define pr_fmt(fmt)	"UDC core: " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/idr.h>
+#include <linux/err.h>
+#include <linux/dma-mapping.h>
+#include <linux/sched/task_stack.h>
+#include <linux/workqueue.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb.h>
+
+#include "trace.h"
+
+static DEFINE_IDA(gadget_id_numbers);
+
+static struct bus_type gadget_bus_type;
+
+/**
+ * struct usb_udc - describes one usb device controller
+ * @driver: the gadget driver pointer. For use by the class code
+ * @dev: the child device to the actual controller
+ * @gadget: the gadget. For use by the class code
+ * @list: for use by the udc class driver
+ * @vbus: for udcs who care about vbus status, this value is real vbus status;
+ * for udcs who do not care about vbus status, this value is always true
+ * @started: the UDC's started state. True if the UDC had started.
+ * @allow_connect: Indicates whether UDC is allowed to be pulled up.
+ * Set/cleared by gadget_(un)bind_driver() after gadget driver is bound or
+ * unbound.
+ * @vbus_work: work routine to handle VBUS status change notifications.
+ * @connect_lock: protects udc->started, gadget->connect,
+ * gadget->allow_connect and gadget->deactivate. The routines
+ * usb_gadget_connect_locked(), usb_gadget_disconnect_locked(),
+ * usb_udc_connect_control_locked(), usb_gadget_udc_start_locked() and
+ * usb_gadget_udc_stop_locked() are called with this lock held.
+ *
+ * This represents the internal data structure which is used by the UDC-class
+ * to hold information about udc driver and gadget together.
+ */
+struct usb_udc {
+	struct usb_gadget_driver	*driver;
+	struct usb_gadget		*gadget;
+	struct device			dev;
+	struct list_head		list;
+	bool				vbus;
+	bool				started;
+	bool				allow_connect;
+	struct work_struct		vbus_work;
+	struct mutex			connect_lock;
+};
+
+static struct class *udc_class;
+static LIST_HEAD(udc_list);
+
+/* Protects udc_list, udc->driver, driver->is_bound, and related calls */
+static DEFINE_MUTEX(udc_lock);
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * usb_ep_set_maxpacket_limit - set maximum packet size limit for endpoint
+ * @ep:the endpoint being configured
+ * @maxpacket_limit:value of maximum packet size limit
+ *
+ * This function should be used only in UDC drivers to initialize endpoint
+ * (usually in probe function).
+ */
+void usb_ep_set_maxpacket_limit(struct usb_ep *ep,
+					      unsigned maxpacket_limit)
+{
+	ep->maxpacket_limit = maxpacket_limit;
+	ep->maxpacket = maxpacket_limit;
+
+	trace_usb_ep_set_maxpacket_limit(ep, 0);
+}
+EXPORT_SYMBOL_GPL(usb_ep_set_maxpacket_limit);
+
+/**
+ * usb_ep_enable - configure endpoint, making it usable
+ * @ep:the endpoint being configured.  may not be the endpoint named "ep0".
+ *	drivers discover endpoints through the ep_list of a usb_gadget.
+ *
+ * When configurations are set, or when interface settings change, the driver
+ * will enable or disable the relevant endpoints.  while it is enabled, an
+ * endpoint may be used for i/o until the driver receives a disconnect() from
+ * the host or until the endpoint is disabled.
+ *
+ * the ep0 implementation (which calls this routine) must ensure that the
+ * hardware capabilities of each endpoint match the descriptor provided
+ * for it.  for example, an endpoint named "ep2in-bulk" would be usable
+ * for interrupt transfers as well as bulk, but it likely couldn't be used
+ * for iso transfers or for endpoint 14.  some endpoints are fully
+ * configurable, with more generic names like "ep-a".  (remember that for
+ * USB, "in" means "towards the USB host".)
+ *
+ * This routine may be called in an atomic (interrupt) context.
+ *
+ * returns zero, or a negative error code.
+ */
+int usb_ep_enable(struct usb_ep *ep)
+{
+	int ret = 0;
+
+	if (ep->enabled)
+		goto out;
+
+	/* UDC drivers can't handle endpoints with maxpacket size 0 */
+	if (usb_endpoint_maxp(ep->desc) == 0) {
+		/*
+		 * We should log an error message here, but we can't call
+		 * dev_err() because there's no way to find the gadget
+		 * given only ep.
+		 */
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = ep->ops->enable(ep, ep->desc);
+	if (ret)
+		goto out;
+
+	ep->enabled = true;
+
+out:
+	trace_usb_ep_enable(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_enable);
+
+/**
+ * usb_ep_disable - endpoint is no longer usable
+ * @ep:the endpoint being unconfigured.  may not be the endpoint named "ep0".
+ *
+ * no other task may be using this endpoint when this is called.
+ * any pending and uncompleted requests will complete with status
+ * indicating disconnect (-ESHUTDOWN) before this call returns.
+ * gadget drivers must call usb_ep_enable() again before queueing
+ * requests to the endpoint.
+ *
+ * This routine may be called in an atomic (interrupt) context.
+ *
+ * returns zero, or a negative error code.
+ */
+int usb_ep_disable(struct usb_ep *ep)
+{
+	int ret = 0;
+
+	if (!ep->enabled)
+		goto out;
+
+	ret = ep->ops->disable(ep);
+	if (ret)
+		goto out;
+
+	ep->enabled = false;
+
+out:
+	trace_usb_ep_disable(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_disable);
+
+/**
+ * usb_ep_alloc_request - allocate a request object to use with this endpoint
+ * @ep:the endpoint to be used with with the request
+ * @gfp_flags:GFP_* flags to use
+ *
+ * Request objects must be allocated with this call, since they normally
+ * need controller-specific setup and may even need endpoint-specific
+ * resources such as allocation of DMA descriptors.
+ * Requests may be submitted with usb_ep_queue(), and receive a single
+ * completion callback.  Free requests with usb_ep_free_request(), when
+ * they are no longer needed.
+ *
+ * Returns the request, or null if one could not be allocated.
+ */
+struct usb_request *usb_ep_alloc_request(struct usb_ep *ep,
+						       gfp_t gfp_flags)
+{
+	struct usb_request *req = NULL;
+
+	req = ep->ops->alloc_request(ep, gfp_flags);
+
+	trace_usb_ep_alloc_request(ep, req, req ? 0 : -ENOMEM);
+
+	return req;
+}
+EXPORT_SYMBOL_GPL(usb_ep_alloc_request);
+
+/**
+ * usb_ep_free_request - frees a request object
+ * @ep:the endpoint associated with the request
+ * @req:the request being freed
+ *
+ * Reverses the effect of usb_ep_alloc_request().
+ * Caller guarantees the request is not queued, and that it will
+ * no longer be requeued (or otherwise used).
+ */
+void usb_ep_free_request(struct usb_ep *ep,
+				       struct usb_request *req)
+{
+	trace_usb_ep_free_request(ep, req, 0);
+	ep->ops->free_request(ep, req);
+}
+EXPORT_SYMBOL_GPL(usb_ep_free_request);
+
+/**
+ * usb_ep_queue - queues (submits) an I/O request to an endpoint.
+ * @ep:the endpoint associated with the request
+ * @req:the request being submitted
+ * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't
+ *	pre-allocate all necessary memory with the request.
+ *
+ * This tells the device controller to perform the specified request through
+ * that endpoint (reading or writing a buffer).  When the request completes,
+ * including being canceled by usb_ep_dequeue(), the request's completion
+ * routine is called to return the request to the driver.  Any endpoint
+ * (except control endpoints like ep0) may have more than one transfer
+ * request queued; they complete in FIFO order.  Once a gadget driver
+ * submits a request, that request may not be examined or modified until it
+ * is given back to that driver through the completion callback.
+ *
+ * Each request is turned into one or more packets.  The controller driver
+ * never merges adjacent requests into the same packet.  OUT transfers
+ * will sometimes use data that's already buffered in the hardware.
+ * Drivers can rely on the fact that the first byte of the request's buffer
+ * always corresponds to the first byte of some USB packet, for both
+ * IN and OUT transfers.
+ *
+ * Bulk endpoints can queue any amount of data; the transfer is packetized
+ * automatically.  The last packet will be short if the request doesn't fill it
+ * out completely.  Zero length packets (ZLPs) should be avoided in portable
+ * protocols since not all usb hardware can successfully handle zero length
+ * packets.  (ZLPs may be explicitly written, and may be implicitly written if
+ * the request 'zero' flag is set.)  Bulk endpoints may also be used
+ * for interrupt transfers; but the reverse is not true, and some endpoints
+ * won't support every interrupt transfer.  (Such as 768 byte packets.)
+ *
+ * Interrupt-only endpoints are less functional than bulk endpoints, for
+ * example by not supporting queueing or not handling buffers that are
+ * larger than the endpoint's maxpacket size.  They may also treat data
+ * toggle differently.
+ *
+ * Control endpoints ... after getting a setup() callback, the driver queues
+ * one response (even if it would be zero length).  That enables the
+ * status ack, after transferring data as specified in the response.  Setup
+ * functions may return negative error codes to generate protocol stalls.
+ * (Note that some USB device controllers disallow protocol stall responses
+ * in some cases.)  When control responses are deferred (the response is
+ * written after the setup callback returns), then usb_ep_set_halt() may be
+ * used on ep0 to trigger protocol stalls.  Depending on the controller,
+ * it may not be possible to trigger a status-stage protocol stall when the
+ * data stage is over, that is, from within the response's completion
+ * routine.
+ *
+ * For periodic endpoints, like interrupt or isochronous ones, the usb host
+ * arranges to poll once per interval, and the gadget driver usually will
+ * have queued some data to transfer at that time.
+ *
+ * Note that @req's ->complete() callback must never be called from
+ * within usb_ep_queue() as that can create deadlock situations.
+ *
+ * This routine may be called in interrupt context.
+ *
+ * Returns zero, or a negative error code.  Endpoints that are not enabled
+ * report errors; errors will also be
+ * reported when the usb peripheral is disconnected.
+ *
+ * If and only if @req is successfully queued (the return value is zero),
+ * @req->complete() will be called exactly once, when the Gadget core and
+ * UDC are finished with the request.  When the completion function is called,
+ * control of the request is returned to the device driver which submitted it.
+ * The completion handler may then immediately free or reuse @req.
+ */
+int usb_ep_queue(struct usb_ep *ep,
+			       struct usb_request *req, gfp_t gfp_flags)
+{
+	int ret = 0;
+
+	if (WARN_ON_ONCE(!ep->enabled && ep->address)) {
+		ret = -ESHUTDOWN;
+		goto out;
+	}
+
+	ret = ep->ops->queue(ep, req, gfp_flags);
+
+out:
+	trace_usb_ep_queue(ep, req, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_queue);
+
+/**
+ * usb_ep_dequeue - dequeues (cancels, unlinks) an I/O request from an endpoint
+ * @ep:the endpoint associated with the request
+ * @req:the request being canceled
+ *
+ * If the request is still active on the endpoint, it is dequeued and
+ * eventually its completion routine is called (with status -ECONNRESET);
+ * else a negative error code is returned.  This routine is asynchronous,
+ * that is, it may return before the completion routine runs.
+ *
+ * Note that some hardware can't clear out write fifos (to unlink the request
+ * at the head of the queue) except as part of disconnecting from usb. Such
+ * restrictions prevent drivers from supporting configuration changes,
+ * even to configuration zero (a "chapter 9" requirement).
+ *
+ * This routine may be called in interrupt context.
+ */
+int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	int ret;
+
+	ret = ep->ops->dequeue(ep, req);
+	trace_usb_ep_dequeue(ep, req, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_dequeue);
+
+/**
+ * usb_ep_set_halt - sets the endpoint halt feature.
+ * @ep: the non-isochronous endpoint being stalled
+ *
+ * Use this to stall an endpoint, perhaps as an error report.
+ * Except for control endpoints,
+ * the endpoint stays halted (will not stream any data) until the host
+ * clears this feature; drivers may need to empty the endpoint's request
+ * queue first, to make sure no inappropriate transfers happen.
+ *
+ * Note that while an endpoint CLEAR_FEATURE will be invisible to the
+ * gadget driver, a SET_INTERFACE will not be.  To reset endpoints for the
+ * current altsetting, see usb_ep_clear_halt().  When switching altsettings,
+ * it's simplest to use usb_ep_enable() or usb_ep_disable() for the endpoints.
+ *
+ * This routine may be called in interrupt context.
+ *
+ * Returns zero, or a negative error code.  On success, this call sets
+ * underlying hardware state that blocks data transfers.
+ * Attempts to halt IN endpoints will fail (returning -EAGAIN) if any
+ * transfer requests are still queued, or if the controller hardware
+ * (usually a FIFO) still holds bytes that the host hasn't collected.
+ */
+int usb_ep_set_halt(struct usb_ep *ep)
+{
+	int ret;
+
+	ret = ep->ops->set_halt(ep, 1);
+	trace_usb_ep_set_halt(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_set_halt);
+
+/**
+ * usb_ep_clear_halt - clears endpoint halt, and resets toggle
+ * @ep:the bulk or interrupt endpoint being reset
+ *
+ * Use this when responding to the standard usb "set interface" request,
+ * for endpoints that aren't reconfigured, after clearing any other state
+ * in the endpoint's i/o queue.
+ *
+ * This routine may be called in interrupt context.
+ *
+ * Returns zero, or a negative error code.  On success, this call clears
+ * the underlying hardware state reflecting endpoint halt and data toggle.
+ * Note that some hardware can't support this request (like pxa2xx_udc),
+ * and accordingly can't correctly implement interface altsettings.
+ */
+int usb_ep_clear_halt(struct usb_ep *ep)
+{
+	int ret;
+
+	ret = ep->ops->set_halt(ep, 0);
+	trace_usb_ep_clear_halt(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_clear_halt);
+
+/**
+ * usb_ep_set_wedge - sets the halt feature and ignores clear requests
+ * @ep: the endpoint being wedged
+ *
+ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
+ * requests. If the gadget driver clears the halt status, it will
+ * automatically unwedge the endpoint.
+ *
+ * This routine may be called in interrupt context.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_ep_set_wedge(struct usb_ep *ep)
+{
+	int ret;
+
+	if (ep->ops->set_wedge)
+		ret = ep->ops->set_wedge(ep);
+	else
+		ret = ep->ops->set_halt(ep, 1);
+
+	trace_usb_ep_set_wedge(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_set_wedge);
+
+/**
+ * usb_ep_fifo_status - returns number of bytes in fifo, or error
+ * @ep: the endpoint whose fifo status is being checked.
+ *
+ * FIFO endpoints may have "unclaimed data" in them in certain cases,
+ * such as after aborted transfers.  Hosts may not have collected all
+ * the IN data written by the gadget driver (and reported by a request
+ * completion).  The gadget driver may not have collected all the data
+ * written OUT to it by the host.  Drivers that need precise handling for
+ * fault reporting or recovery may need to use this call.
+ *
+ * This routine may be called in interrupt context.
+ *
+ * This returns the number of such bytes in the fifo, or a negative
+ * errno if the endpoint doesn't use a FIFO or doesn't support such
+ * precise handling.
+ */
+int usb_ep_fifo_status(struct usb_ep *ep)
+{
+	int ret;
+
+	if (ep->ops->fifo_status)
+		ret = ep->ops->fifo_status(ep);
+	else
+		ret = -EOPNOTSUPP;
+
+	trace_usb_ep_fifo_status(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_fifo_status);
+
+/**
+ * usb_ep_fifo_flush - flushes contents of a fifo
+ * @ep: the endpoint whose fifo is being flushed.
+ *
+ * This call may be used to flush the "unclaimed data" that may exist in
+ * an endpoint fifo after abnormal transaction terminations.  The call
+ * must never be used except when endpoint is not being used for any
+ * protocol translation.
+ *
+ * This routine may be called in interrupt context.
+ */
+void usb_ep_fifo_flush(struct usb_ep *ep)
+{
+	if (ep->ops->fifo_flush)
+		ep->ops->fifo_flush(ep);
+
+	trace_usb_ep_fifo_flush(ep, 0);
+}
+EXPORT_SYMBOL_GPL(usb_ep_fifo_flush);
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * usb_gadget_frame_number - returns the current frame number
+ * @gadget: controller that reports the frame number
+ *
+ * Returns the usb frame number, normally eleven bits from a SOF packet,
+ * or negative errno if this device doesn't support this capability.
+ */
+int usb_gadget_frame_number(struct usb_gadget *gadget)
+{
+	int ret;
+
+	ret = gadget->ops->get_frame(gadget);
+
+	trace_usb_gadget_frame_number(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_frame_number);
+
+/**
+ * usb_gadget_wakeup - tries to wake up the host connected to this gadget
+ * @gadget: controller used to wake up the host
+ *
+ * Returns zero on success, else negative error code if the hardware
+ * doesn't support such attempts, or its support has not been enabled
+ * by the usb host.  Drivers must return device descriptors that report
+ * their ability to support this, or hosts won't enable it.
+ *
+ * This may also try to use SRP to wake the host and start enumeration,
+ * even if OTG isn't otherwise in use.  OTG devices may also start
+ * remote wakeup even when hosts don't explicitly enable it.
+ */
+int usb_gadget_wakeup(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->wakeup) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->wakeup(gadget);
+
+out:
+	trace_usb_gadget_wakeup(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_wakeup);
+
+/**
+ * usb_gadget_set_selfpowered - sets the device selfpowered feature.
+ * @gadget:the device being declared as self-powered
+ *
+ * this affects the device status reported by the hardware driver
+ * to reflect that it now has a local power supply.
+ *
+ * returns zero on success, else negative errno.
+ */
+int usb_gadget_set_selfpowered(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->set_selfpowered) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->set_selfpowered(gadget, 1);
+
+out:
+	trace_usb_gadget_set_selfpowered(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_set_selfpowered);
+
+/**
+ * usb_gadget_clear_selfpowered - clear the device selfpowered feature.
+ * @gadget:the device being declared as bus-powered
+ *
+ * this affects the device status reported by the hardware driver.
+ * some hardware may not support bus-powered operation, in which
+ * case this feature's value can never change.
+ *
+ * returns zero on success, else negative errno.
+ */
+int usb_gadget_clear_selfpowered(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->set_selfpowered) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->set_selfpowered(gadget, 0);
+
+out:
+	trace_usb_gadget_clear_selfpowered(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_clear_selfpowered);
+
+/**
+ * usb_gadget_vbus_connect - Notify controller that VBUS is powered
+ * @gadget:The device which now has VBUS power.
+ * Context: can sleep
+ *
+ * This call is used by a driver for an external transceiver (or GPIO)
+ * that detects a VBUS power session starting.  Common responses include
+ * resuming the controller, activating the D+ (or D-) pullup to let the
+ * host detect that a USB device is attached, and starting to draw power
+ * (8mA or possibly more, especially after SET_CONFIGURATION).
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_vbus_connect(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->vbus_session) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->vbus_session(gadget, 1);
+
+out:
+	trace_usb_gadget_vbus_connect(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_vbus_connect);
+
+/**
+ * usb_gadget_vbus_draw - constrain controller's VBUS power usage
+ * @gadget:The device whose VBUS usage is being described
+ * @mA:How much current to draw, in milliAmperes.  This should be twice
+ *	the value listed in the configuration descriptor bMaxPower field.
+ *
+ * This call is used by gadget drivers during SET_CONFIGURATION calls,
+ * reporting how much power the device may consume.  For example, this
+ * could affect how quickly batteries are recharged.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	int ret = 0;
+
+	if (!gadget->ops->vbus_draw) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->vbus_draw(gadget, mA);
+	if (!ret)
+		gadget->mA = mA;
+
+out:
+	trace_usb_gadget_vbus_draw(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_vbus_draw);
+
+/**
+ * usb_gadget_vbus_disconnect - notify controller about VBUS session end
+ * @gadget:the device whose VBUS supply is being described
+ * Context: can sleep
+ *
+ * This call is used by a driver for an external transceiver (or GPIO)
+ * that detects a VBUS power session ending.  Common responses include
+ * reversing everything done in usb_gadget_vbus_connect().
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->vbus_session) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->vbus_session(gadget, 0);
+
+out:
+	trace_usb_gadget_vbus_disconnect(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_vbus_disconnect);
+
+static int usb_gadget_connect_locked(struct usb_gadget *gadget)
+	__must_hold(&gadget->udc->connect_lock)
+{
+	int ret = 0;
+
+	if (!gadget->ops->pullup) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (gadget->deactivated || !gadget->udc->allow_connect || !gadget->udc->started) {
+		/*
+		 * If the gadget isn't usable (because it is deactivated,
+		 * unbound, or not yet started), we only save the new state.
+		 * The gadget will be connected automatically when it is
+		 * activated/bound/started.
+		 */
+		gadget->connected = true;
+		goto out;
+	}
+
+	ret = gadget->ops->pullup(gadget, 1);
+	if (!ret)
+		gadget->connected = 1;
+
+out:
+	trace_usb_gadget_connect(gadget, ret);
+
+	return ret;
+}
+
+/**
+ * usb_gadget_connect - software-controlled connect to USB host
+ * @gadget:the peripheral being connected
+ *
+ * Enables the D+ (or potentially D-) pullup.  The host will start
+ * enumerating this gadget when the pullup is active and a VBUS session
+ * is active (the link is powered).
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_connect(struct usb_gadget *gadget)
+{
+	int ret;
+
+	mutex_lock(&gadget->udc->connect_lock);
+	ret = usb_gadget_connect_locked(gadget);
+	mutex_unlock(&gadget->udc->connect_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_connect);
+
+static int usb_gadget_disconnect_locked(struct usb_gadget *gadget)
+	__must_hold(&gadget->udc->connect_lock)
+{
+	int ret = 0;
+
+	if (!gadget->ops->pullup) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (!gadget->connected)
+		goto out;
+
+	if (gadget->deactivated || !gadget->udc->started) {
+		/*
+		 * If gadget is deactivated we only save new state.
+		 * Gadget will stay disconnected after activation.
+		 */
+		gadget->connected = false;
+		goto out;
+	}
+
+	ret = gadget->ops->pullup(gadget, 0);
+	if (!ret)
+		gadget->connected = 0;
+
+	mutex_lock(&udc_lock);
+	if (gadget->udc->driver)
+		gadget->udc->driver->disconnect(gadget);
+	mutex_unlock(&udc_lock);
+
+out:
+	trace_usb_gadget_disconnect(gadget, ret);
+
+	return ret;
+}
+
+/**
+ * usb_gadget_disconnect - software-controlled disconnect from USB host
+ * @gadget:the peripheral being disconnected
+ *
+ * Disables the D+ (or potentially D-) pullup, which the host may see
+ * as a disconnect (when a VBUS session is active).  Not all systems
+ * support software pullup controls.
+ *
+ * Following a successful disconnect, invoke the ->disconnect() callback
+ * for the current gadget driver so that UDC drivers don't need to.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_disconnect(struct usb_gadget *gadget)
+{
+	int ret;
+
+	mutex_lock(&gadget->udc->connect_lock);
+	ret = usb_gadget_disconnect_locked(gadget);
+	mutex_unlock(&gadget->udc->connect_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_disconnect);
+
+/**
+ * usb_gadget_deactivate - deactivate function which is not ready to work
+ * @gadget: the peripheral being deactivated
+ *
+ * This routine may be used during the gadget driver bind() call to prevent
+ * the peripheral from ever being visible to the USB host, unless later
+ * usb_gadget_activate() is called.  For example, user mode components may
+ * need to be activated before the system can talk to hosts.
+ *
+ * This routine may sleep; it must not be called in interrupt context
+ * (such as from within a gadget driver's disconnect() callback).
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_deactivate(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	mutex_lock(&gadget->udc->connect_lock);
+	if (gadget->deactivated)
+		goto unlock;
+
+	if (gadget->connected) {
+		ret = usb_gadget_disconnect_locked(gadget);
+		if (ret)
+			goto unlock;
+
+		/*
+		 * If gadget was being connected before deactivation, we want
+		 * to reconnect it in usb_gadget_activate().
+		 */
+		gadget->connected = true;
+	}
+	gadget->deactivated = true;
+
+unlock:
+	mutex_unlock(&gadget->udc->connect_lock);
+	trace_usb_gadget_deactivate(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_deactivate);
+
+/**
+ * usb_gadget_activate - activate function which is not ready to work
+ * @gadget: the peripheral being activated
+ *
+ * This routine activates gadget which was previously deactivated with
+ * usb_gadget_deactivate() call. It calls usb_gadget_connect() if needed.
+ *
+ * This routine may sleep; it must not be called in interrupt context.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_activate(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	mutex_lock(&gadget->udc->connect_lock);
+	if (!gadget->deactivated)
+		goto unlock;
+
+	gadget->deactivated = false;
+
+	/*
+	 * If gadget has been connected before deactivation, or became connected
+	 * while it was being deactivated, we call usb_gadget_connect().
+	 */
+	if (gadget->connected)
+		ret = usb_gadget_connect_locked(gadget);
+
+unlock:
+	mutex_unlock(&gadget->udc->connect_lock);
+	trace_usb_gadget_activate(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_activate);
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef	CONFIG_HAS_DMA
+
+int usb_gadget_map_request_by_dev(struct device *dev,
+		struct usb_request *req, int is_in)
+{
+	if (req->length == 0)
+		return 0;
+
+	if (req->num_sgs) {
+		int     mapped;
+
+		mapped = dma_map_sg(dev, req->sg, req->num_sgs,
+				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		if (mapped == 0) {
+			dev_err(dev, "failed to map SGs\n");
+			return -EFAULT;
+		}
+
+		req->num_mapped_sgs = mapped;
+	} else {
+		if (is_vmalloc_addr(req->buf)) {
+			dev_err(dev, "buffer is not dma capable\n");
+			return -EFAULT;
+		} else if (object_is_on_stack(req->buf)) {
+			dev_err(dev, "buffer is on stack\n");
+			return -EFAULT;
+		}
+
+		req->dma = dma_map_single(dev, req->buf, req->length,
+				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+		if (dma_mapping_error(dev, req->dma)) {
+			dev_err(dev, "failed to map buffer\n");
+			return -EFAULT;
+		}
+
+		req->dma_mapped = 1;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_map_request_by_dev);
+
+int usb_gadget_map_request(struct usb_gadget *gadget,
+		struct usb_request *req, int is_in)
+{
+	return usb_gadget_map_request_by_dev(gadget->dev.parent, req, is_in);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_map_request);
+
+void usb_gadget_unmap_request_by_dev(struct device *dev,
+		struct usb_request *req, int is_in)
+{
+	if (req->length == 0)
+		return;
+
+	if (req->num_mapped_sgs) {
+		dma_unmap_sg(dev, req->sg, req->num_sgs,
+				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+		req->num_mapped_sgs = 0;
+	} else if (req->dma_mapped) {
+		dma_unmap_single(dev, req->dma, req->length,
+				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		req->dma_mapped = 0;
+	}
+}
+EXPORT_SYMBOL_GPL(usb_gadget_unmap_request_by_dev);
+
+void usb_gadget_unmap_request(struct usb_gadget *gadget,
+		struct usb_request *req, int is_in)
+{
+	usb_gadget_unmap_request_by_dev(gadget->dev.parent, req, is_in);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_unmap_request);
+
+#endif	/* CONFIG_HAS_DMA */
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * usb_gadget_giveback_request - give the request back to the gadget layer
+ * @ep: the endpoint to be used with with the request
+ * @req: the request being given back
+ *
+ * This is called by device controller drivers in order to return the
+ * completed request back to the gadget layer.
+ */
+void usb_gadget_giveback_request(struct usb_ep *ep,
+		struct usb_request *req)
+{
+	if (likely(req->status == 0))
+		usb_led_activity(USB_LED_EVENT_GADGET);
+
+	trace_usb_gadget_giveback_request(ep, req, 0);
+
+	req->complete(ep, req);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * gadget_find_ep_by_name - returns ep whose name is the same as sting passed
+ *	in second parameter or NULL if searched endpoint not found
+ * @g: controller to check for quirk
+ * @name: name of searched endpoint
+ */
+struct usb_ep *gadget_find_ep_by_name(struct usb_gadget *g, const char *name)
+{
+	struct usb_ep *ep;
+
+	gadget_for_each_ep(ep, g) {
+		if (!strcmp(ep->name, name))
+			return ep;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(gadget_find_ep_by_name);
+
+/* ------------------------------------------------------------------------- */
+
+int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
+		struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
+		struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+	u8		type;
+	u16		max;
+	int		num_req_streams = 0;
+
+	/* endpoint already claimed? */
+	if (ep->claimed)
+		return 0;
+
+	type = usb_endpoint_type(desc);
+	max = usb_endpoint_maxp(desc);
+
+	if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
+		return 0;
+	if (usb_endpoint_dir_out(desc) && !ep->caps.dir_out)
+		return 0;
+
+	if (max > ep->maxpacket_limit)
+		return 0;
+
+	/* "high bandwidth" works only at high speed */
+	if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp_mult(desc) > 1)
+		return 0;
+
+	switch (type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* only support ep0 for portable CONTROL traffic */
+		return 0;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (!ep->caps.type_iso)
+			return 0;
+		/* ISO:  limit 1023 bytes full speed, 1024 high/super speed */
+		if (!gadget_is_dualspeed(gadget) && max > 1023)
+			return 0;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		if (!ep->caps.type_bulk)
+			return 0;
+		if (ep_comp && gadget_is_superspeed(gadget)) {
+			/* Get the number of required streams from the
+			 * EP companion descriptor and see if the EP
+			 * matches it
+			 */
+			num_req_streams = ep_comp->bmAttributes & 0x1f;
+			if (num_req_streams > ep->max_streams)
+				return 0;
+		}
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		/* Bulk endpoints handle interrupt transfers,
+		 * except the toggle-quirky iso-synch kind
+		 */
+		if (!ep->caps.type_int && !ep->caps.type_bulk)
+			return 0;
+		/* INT:  limit 64 bytes full speed, 1024 high/super speed */
+		if (!gadget_is_dualspeed(gadget) && max > 64)
+			return 0;
+		break;
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_ep_match_desc);
+
+/**
+ * usb_gadget_check_config - checks if the UDC can support the binded
+ *	configuration
+ * @gadget: controller to check the USB configuration
+ *
+ * Ensure that a UDC is able to support the requested resources by a
+ * configuration, and that there are no resource limitations, such as
+ * internal memory allocated to all requested endpoints.
+ *
+ * Returns zero on success, else a negative errno.
+ */
+int usb_gadget_check_config(struct usb_gadget *gadget)
+{
+	if (gadget->ops->check_config)
+		return gadget->ops->check_config(gadget);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_check_config);
+
+/* ------------------------------------------------------------------------- */
+
+static void usb_gadget_state_work(struct work_struct *work)
+{
+	struct usb_gadget *gadget = work_to_gadget(work);
+	struct usb_udc *udc = gadget->udc;
+
+	if (udc)
+		sysfs_notify(&udc->dev.kobj, NULL, "state");
+}
+
+void usb_gadget_set_state(struct usb_gadget *gadget,
+		enum usb_device_state state)
+{
+	gadget->state = state;
+	schedule_work(&gadget->work);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_set_state);
+
+/* ------------------------------------------------------------------------- */
+
+/* Acquire connect_lock before calling this function. */
+static void usb_udc_connect_control_locked(struct usb_udc *udc) __must_hold(&udc->connect_lock)
+{
+	if (udc->vbus)
+		usb_gadget_connect_locked(udc->gadget);
+	else
+		usb_gadget_disconnect_locked(udc->gadget);
+}
+
+static void vbus_event_work(struct work_struct *work)
+{
+	struct usb_udc *udc = container_of(work, struct usb_udc, vbus_work);
+
+	mutex_lock(&udc->connect_lock);
+	usb_udc_connect_control_locked(udc);
+	mutex_unlock(&udc->connect_lock);
+}
+
+/**
+ * usb_udc_vbus_handler - updates the udc core vbus status, and try to
+ * connect or disconnect gadget
+ * @gadget: The gadget which vbus change occurs
+ * @status: The vbus status
+ *
+ * The udc driver calls it when it wants to connect or disconnect gadget
+ * according to vbus status.
+ *
+ * This function can be invoked from interrupt context by irq handlers of
+ * the gadget drivers, however, usb_udc_connect_control() has to run in
+ * non-atomic context due to the following:
+ * a. Some of the gadget driver implementations expect the ->pullup
+ * callback to be invoked in non-atomic context.
+ * b. usb_gadget_disconnect() acquires udc_lock which is a mutex.
+ * Hence offload invocation of usb_udc_connect_control() to workqueue.
+ */
+void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status)
+{
+	struct usb_udc *udc = gadget->udc;
+
+	if (udc) {
+		udc->vbus = status;
+		schedule_work(&udc->vbus_work);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_udc_vbus_handler);
+
+/**
+ * usb_gadget_udc_reset - notifies the udc core that bus reset occurs
+ * @gadget: The gadget which bus reset occurs
+ * @driver: The gadget driver we want to notify
+ *
+ * If the udc driver has bus reset handler, it needs to call this when the bus
+ * reset occurs, it notifies the gadget driver that the bus reset occurs as
+ * well as updates gadget state.
+ */
+void usb_gadget_udc_reset(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	driver->reset(gadget);
+	usb_gadget_set_state(gadget, USB_STATE_DEFAULT);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_udc_reset);
+
+/**
+ * usb_gadget_udc_start_locked - tells usb device controller to start up
+ * @udc: The UDC to be started
+ *
+ * This call is issued by the UDC Class driver when it's about
+ * to register a gadget driver to the device controller, before
+ * calling gadget driver's bind() method.
+ *
+ * It allows the controller to be powered off until strictly
+ * necessary to have it powered on.
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * Caller should acquire connect_lock before invoking this function.
+ */
+static inline int usb_gadget_udc_start_locked(struct usb_udc *udc)
+	__must_hold(&udc->connect_lock)
+{
+	int ret;
+
+	if (udc->started) {
+		dev_err(&udc->dev, "UDC had already started\n");
+		return -EBUSY;
+	}
+
+	ret = udc->gadget->ops->udc_start(udc->gadget, udc->driver);
+	if (!ret)
+		udc->started = true;
+
+	return ret;
+}
+
+/**
+ * usb_gadget_udc_stop_locked - tells usb device controller we don't need it anymore
+ * @udc: The UDC to be stopped
+ *
+ * This call is issued by the UDC Class driver after calling
+ * gadget driver's unbind() method.
+ *
+ * The details are implementation specific, but it can go as
+ * far as powering off UDC completely and disable its data
+ * line pullups.
+ *
+ * Caller should acquire connect lock before invoking this function.
+ */
+static inline void usb_gadget_udc_stop_locked(struct usb_udc *udc)
+	__must_hold(&udc->connect_lock)
+{
+	if (!udc->started) {
+		dev_err(&udc->dev, "UDC had already stopped\n");
+		return;
+	}
+
+	udc->gadget->ops->udc_stop(udc->gadget);
+	udc->started = false;
+}
+
+/**
+ * usb_gadget_udc_set_speed - tells usb device controller speed supported by
+ *    current driver
+ * @udc: The device we want to set maximum speed
+ * @speed: The maximum speed to allowed to run
+ *
+ * This call is issued by the UDC Class driver before calling
+ * usb_gadget_udc_start() in order to make sure that we don't try to
+ * connect on speeds the gadget driver doesn't support.
+ */
+static inline void usb_gadget_udc_set_speed(struct usb_udc *udc,
+					    enum usb_device_speed speed)
+{
+	struct usb_gadget *gadget = udc->gadget;
+	enum usb_device_speed s;
+
+	if (speed == USB_SPEED_UNKNOWN)
+		s = gadget->max_speed;
+	else
+		s = min(speed, gadget->max_speed);
+
+	if (s == USB_SPEED_SUPER_PLUS && gadget->ops->udc_set_ssp_rate)
+		gadget->ops->udc_set_ssp_rate(gadget, gadget->max_ssp_rate);
+	else if (gadget->ops->udc_set_speed)
+		gadget->ops->udc_set_speed(gadget, s);
+}
+
+/**
+ * usb_gadget_enable_async_callbacks - tell usb device controller to enable asynchronous callbacks
+ * @udc: The UDC which should enable async callbacks
+ *
+ * This routine is used when binding gadget drivers.  It undoes the effect
+ * of usb_gadget_disable_async_callbacks(); the UDC driver should enable IRQs
+ * (if necessary) and resume issuing callbacks.
+ *
+ * This routine will always be called in process context.
+ */
+static inline void usb_gadget_enable_async_callbacks(struct usb_udc *udc)
+{
+	struct usb_gadget *gadget = udc->gadget;
+
+	if (gadget->ops->udc_async_callbacks)
+		gadget->ops->udc_async_callbacks(gadget, true);
+}
+
+/**
+ * usb_gadget_disable_async_callbacks - tell usb device controller to disable asynchronous callbacks
+ * @udc: The UDC which should disable async callbacks
+ *
+ * This routine is used when unbinding gadget drivers.  It prevents a race:
+ * The UDC driver doesn't know when the gadget driver's ->unbind callback
+ * runs, so unless it is told to disable asynchronous callbacks, it might
+ * issue a callback (such as ->disconnect) after the unbind has completed.
+ *
+ * After this function runs, the UDC driver must suppress all ->suspend,
+ * ->resume, ->disconnect, ->reset, and ->setup callbacks to the gadget driver
+ * until async callbacks are again enabled.  A simple-minded but effective
+ * way to accomplish this is to tell the UDC hardware not to generate any
+ * more IRQs.
+ *
+ * Request completion callbacks must still be issued.  However, it's okay
+ * to defer them until the request is cancelled, since the pull-up will be
+ * turned off during the time period when async callbacks are disabled.
+ *
+ * This routine will always be called in process context.
+ */
+static inline void usb_gadget_disable_async_callbacks(struct usb_udc *udc)
+{
+	struct usb_gadget *gadget = udc->gadget;
+
+	if (gadget->ops->udc_async_callbacks)
+		gadget->ops->udc_async_callbacks(gadget, false);
+}
+
+/**
+ * usb_udc_release - release the usb_udc struct
+ * @dev: the dev member within usb_udc
+ *
+ * This is called by driver's core in order to free memory once the last
+ * reference is released.
+ */
+static void usb_udc_release(struct device *dev)
+{
+	struct usb_udc *udc;
+
+	udc = container_of(dev, struct usb_udc, dev);
+	dev_dbg(dev, "releasing '%s'\n", dev_name(dev));
+	kfree(udc);
+}
+
+static const struct attribute_group *usb_udc_attr_groups[];
+
+static void usb_udc_nop_release(struct device *dev)
+{
+	dev_vdbg(dev, "%s\n", __func__);
+}
+
+/**
+ * usb_initialize_gadget - initialize a gadget and its embedded struct device
+ * @parent: the parent device to this udc. Usually the controller driver's
+ * device.
+ * @gadget: the gadget to be initialized.
+ * @release: a gadget release function.
+ */
+void usb_initialize_gadget(struct device *parent, struct usb_gadget *gadget,
+		void (*release)(struct device *dev))
+{
+	INIT_WORK(&gadget->work, usb_gadget_state_work);
+	gadget->dev.parent = parent;
+
+	if (release)
+		gadget->dev.release = release;
+	else
+		gadget->dev.release = usb_udc_nop_release;
+
+	device_initialize(&gadget->dev);
+	gadget->dev.bus = &gadget_bus_type;
+}
+EXPORT_SYMBOL_GPL(usb_initialize_gadget);
+
+/**
+ * usb_add_gadget - adds a new gadget to the udc class driver list
+ * @gadget: the gadget to be added to the list.
+ *
+ * Returns zero on success, negative errno otherwise.
+ * Does not do a final usb_put_gadget() if an error occurs.
+ */
+int usb_add_gadget(struct usb_gadget *gadget)
+{
+	struct usb_udc		*udc;
+	int			ret = -ENOMEM;
+
+	udc = kzalloc(sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		goto error;
+
+	device_initialize(&udc->dev);
+	udc->dev.release = usb_udc_release;
+	udc->dev.class = udc_class;
+	udc->dev.groups = usb_udc_attr_groups;
+	udc->dev.parent = gadget->dev.parent;
+	ret = dev_set_name(&udc->dev, "%s",
+			kobject_name(&gadget->dev.parent->kobj));
+	if (ret)
+		goto err_put_udc;
+
+	udc->gadget = gadget;
+	gadget->udc = udc;
+	mutex_init(&udc->connect_lock);
+
+	udc->started = false;
+
+	mutex_lock(&udc_lock);
+	list_add_tail(&udc->list, &udc_list);
+	mutex_unlock(&udc_lock);
+	INIT_WORK(&udc->vbus_work, vbus_event_work);
+
+	ret = device_add(&udc->dev);
+	if (ret)
+		goto err_unlist_udc;
+
+	usb_gadget_set_state(gadget, USB_STATE_NOTATTACHED);
+	udc->vbus = true;
+
+	ret = ida_alloc(&gadget_id_numbers, GFP_KERNEL);
+	if (ret < 0)
+		goto err_del_udc;
+	gadget->id_number = ret;
+	dev_set_name(&gadget->dev, "gadget.%d", ret);
+
+	ret = device_add(&gadget->dev);
+	if (ret)
+		goto err_free_id;
+
+	return 0;
+
+ err_free_id:
+	ida_free(&gadget_id_numbers, gadget->id_number);
+
+ err_del_udc:
+	flush_work(&gadget->work);
+	device_del(&udc->dev);
+
+ err_unlist_udc:
+	mutex_lock(&udc_lock);
+	list_del(&udc->list);
+	mutex_unlock(&udc_lock);
+
+ err_put_udc:
+	put_device(&udc->dev);
+
+ error:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_add_gadget);
+
+/**
+ * usb_add_gadget_udc_release - adds a new gadget to the udc class driver list
+ * @parent: the parent device to this udc. Usually the controller driver's
+ * device.
+ * @gadget: the gadget to be added to the list.
+ * @release: a gadget release function.
+ *
+ * Returns zero on success, negative errno otherwise.
+ * Calls the gadget release function in the latter case.
+ */
+int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
+		void (*release)(struct device *dev))
+{
+	int	ret;
+
+	usb_initialize_gadget(parent, gadget, release);
+	ret = usb_add_gadget(gadget);
+	if (ret)
+		usb_put_gadget(gadget);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release);
+
+/**
+ * usb_get_gadget_udc_name - get the name of the first UDC controller
+ * This functions returns the name of the first UDC controller in the system.
+ * Please note that this interface is usefull only for legacy drivers which
+ * assume that there is only one UDC controller in the system and they need to
+ * get its name before initialization. There is no guarantee that the UDC
+ * of the returned name will be still available, when gadget driver registers
+ * itself.
+ *
+ * Returns pointer to string with UDC controller name on success, NULL
+ * otherwise. Caller should kfree() returned string.
+ */
+char *usb_get_gadget_udc_name(void)
+{
+	struct usb_udc *udc;
+	char *name = NULL;
+
+	/* For now we take the first available UDC */
+	mutex_lock(&udc_lock);
+	list_for_each_entry(udc, &udc_list, list) {
+		if (!udc->driver) {
+			name = kstrdup(udc->gadget->name, GFP_KERNEL);
+			break;
+		}
+	}
+	mutex_unlock(&udc_lock);
+	return name;
+}
+EXPORT_SYMBOL_GPL(usb_get_gadget_udc_name);
+
+/**
+ * usb_add_gadget_udc - adds a new gadget to the udc class driver list
+ * @parent: the parent device to this udc. Usually the controller
+ * driver's device.
+ * @gadget: the gadget to be added to the list
+ *
+ * Returns zero on success, negative errno otherwise.
+ */
+int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget)
+{
+	return usb_add_gadget_udc_release(parent, gadget, NULL);
+}
+EXPORT_SYMBOL_GPL(usb_add_gadget_udc);
+
+/**
+ * usb_del_gadget - deletes a gadget and unregisters its udc
+ * @gadget: the gadget to be deleted.
+ *
+ * This will unbind @gadget, if it is bound.
+ * It will not do a final usb_put_gadget().
+ */
+void usb_del_gadget(struct usb_gadget *gadget)
+{
+	struct usb_udc *udc = gadget->udc;
+
+	if (!udc)
+		return;
+
+	dev_vdbg(gadget->dev.parent, "unregistering gadget\n");
+
+	mutex_lock(&udc_lock);
+	list_del(&udc->list);
+	mutex_unlock(&udc_lock);
+
+	kobject_uevent(&udc->dev.kobj, KOBJ_REMOVE);
+	flush_work(&gadget->work);
+	device_del(&gadget->dev);
+	ida_free(&gadget_id_numbers, gadget->id_number);
+	cancel_work_sync(&udc->vbus_work);
+	device_unregister(&udc->dev);
+}
+EXPORT_SYMBOL_GPL(usb_del_gadget);
+
+/**
+ * usb_del_gadget_udc - unregisters a gadget
+ * @gadget: the gadget to be unregistered.
+ *
+ * Calls usb_del_gadget() and does a final usb_put_gadget().
+ */
+void usb_del_gadget_udc(struct usb_gadget *gadget)
+{
+	usb_del_gadget(gadget);
+	usb_put_gadget(gadget);
+}
+EXPORT_SYMBOL_GPL(usb_del_gadget_udc);
+
+/* ------------------------------------------------------------------------- */
+
+static int gadget_match_driver(struct device *dev, struct device_driver *drv)
+{
+	struct usb_gadget *gadget = dev_to_usb_gadget(dev);
+	struct usb_udc *udc = gadget->udc;
+	struct usb_gadget_driver *driver = container_of(drv,
+			struct usb_gadget_driver, driver);
+
+	/* If the driver specifies a udc_name, it must match the UDC's name */
+	if (driver->udc_name &&
+			strcmp(driver->udc_name, dev_name(&udc->dev)) != 0)
+		return 0;
+
+	/* If the driver is already bound to a gadget, it doesn't match */
+	if (driver->is_bound)
+		return 0;
+
+	/* Otherwise any gadget driver matches any UDC */
+	return 1;
+}
+
+static int gadget_bind_driver(struct device *dev)
+{
+	struct usb_gadget *gadget = dev_to_usb_gadget(dev);
+	struct usb_udc *udc = gadget->udc;
+	struct usb_gadget_driver *driver = container_of(dev->driver,
+			struct usb_gadget_driver, driver);
+	int ret = 0;
+
+	mutex_lock(&udc_lock);
+	if (driver->is_bound) {
+		mutex_unlock(&udc_lock);
+		return -ENXIO;		/* Driver binds to only one gadget */
+	}
+	driver->is_bound = true;
+	udc->driver = driver;
+	mutex_unlock(&udc_lock);
+
+	dev_dbg(&udc->dev, "binding gadget driver [%s]\n", driver->function);
+
+	usb_gadget_udc_set_speed(udc, driver->max_speed);
+
+	ret = driver->bind(udc->gadget, driver);
+	if (ret)
+		goto err_bind;
+
+	mutex_lock(&udc->connect_lock);
+	ret = usb_gadget_udc_start_locked(udc);
+	if (ret) {
+		mutex_unlock(&udc->connect_lock);
+		goto err_start;
+	}
+	usb_gadget_enable_async_callbacks(udc);
+	udc->allow_connect = true;
+	usb_udc_connect_control_locked(udc);
+	mutex_unlock(&udc->connect_lock);
+
+	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
+	return 0;
+
+ err_start:
+	driver->unbind(udc->gadget);
+
+ err_bind:
+	if (ret != -EISNAM)
+		dev_err(&udc->dev, "failed to start %s: %d\n",
+			driver->function, ret);
+
+	mutex_lock(&udc_lock);
+	udc->driver = NULL;
+	driver->is_bound = false;
+	mutex_unlock(&udc_lock);
+
+	return ret;
+}
+
+static void gadget_unbind_driver(struct device *dev)
+{
+	struct usb_gadget *gadget = dev_to_usb_gadget(dev);
+	struct usb_udc *udc = gadget->udc;
+	struct usb_gadget_driver *driver = udc->driver;
+
+	dev_dbg(&udc->dev, "unbinding gadget driver [%s]\n", driver->function);
+
+	udc->allow_connect = false;
+	cancel_work_sync(&udc->vbus_work);
+	mutex_lock(&udc->connect_lock);
+	usb_gadget_disconnect_locked(gadget);
+	usb_gadget_disable_async_callbacks(udc);
+	if (gadget->irq)
+		synchronize_irq(gadget->irq);
+	mutex_unlock(&udc->connect_lock);
+
+	udc->driver->unbind(gadget);
+
+	mutex_lock(&udc->connect_lock);
+	usb_gadget_udc_stop_locked(udc);
+	mutex_unlock(&udc->connect_lock);
+
+	mutex_lock(&udc_lock);
+	driver->is_bound = false;
+	udc->driver = NULL;
+	mutex_unlock(&udc_lock);
+
+	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
+}
+
+/* ------------------------------------------------------------------------- */
+
+int usb_gadget_register_driver_owner(struct usb_gadget_driver *driver,
+		struct module *owner, const char *mod_name)
+{
+	int ret;
+
+	if (!driver || !driver->bind || !driver->setup)
+		return -EINVAL;
+
+	driver->driver.bus = &gadget_bus_type;
+	driver->driver.owner = owner;
+	driver->driver.mod_name = mod_name;
+	ret = driver_register(&driver->driver);
+	if (ret) {
+		pr_warn("%s: driver registration failed: %d\n",
+				driver->function, ret);
+		return ret;
+	}
+
+	mutex_lock(&udc_lock);
+	if (!driver->is_bound) {
+		if (driver->match_existing_only) {
+			pr_warn("%s: couldn't find an available UDC or it's busy\n",
+					driver->function);
+			ret = -EBUSY;
+		} else {
+			pr_info("%s: couldn't find an available UDC\n",
+					driver->function);
+			ret = 0;
+		}
+	}
+	mutex_unlock(&udc_lock);
+
+	if (ret)
+		driver_unregister(&driver->driver);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_register_driver_owner);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	if (!driver || !driver->unbind)
+		return -EINVAL;
+
+	driver_unregister(&driver->driver);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_unregister_driver);
+
+/* ------------------------------------------------------------------------- */
+
+static ssize_t srp_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t n)
+{
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+
+	if (sysfs_streq(buf, "1"))
+		usb_gadget_wakeup(udc->gadget);
+
+	return n;
+}
+static DEVICE_ATTR_WO(srp);
+
+static ssize_t soft_connect_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t n)
+{
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+	ssize_t			ret;
+
+	device_lock(&udc->gadget->dev);
+	if (!udc->driver) {
+		dev_err(dev, "soft-connect without a gadget driver\n");
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (sysfs_streq(buf, "connect")) {
+		mutex_lock(&udc->connect_lock);
+		usb_gadget_udc_start_locked(udc);
+		usb_gadget_connect_locked(udc->gadget);
+		mutex_unlock(&udc->connect_lock);
+	} else if (sysfs_streq(buf, "disconnect")) {
+		mutex_lock(&udc->connect_lock);
+		usb_gadget_disconnect_locked(udc->gadget);
+		usb_gadget_udc_stop_locked(udc);
+		mutex_unlock(&udc->connect_lock);
+	} else {
+		dev_err(dev, "unsupported command '%s'\n", buf);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = n;
+out:
+	device_unlock(&udc->gadget->dev);
+	return ret;
+}
+static DEVICE_ATTR_WO(soft_connect);
+
+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+	struct usb_gadget	*gadget = udc->gadget;
+
+	return sprintf(buf, "%s\n", usb_state_string(gadget->state));
+}
+static DEVICE_ATTR_RO(state);
+
+static ssize_t function_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+	struct usb_gadget_driver *drv;
+	int			rc = 0;
+
+	mutex_lock(&udc_lock);
+	drv = udc->driver;
+	if (drv && drv->function)
+		rc = scnprintf(buf, PAGE_SIZE, "%s\n", drv->function);
+	mutex_unlock(&udc_lock);
+	return rc;
+}
+static DEVICE_ATTR_RO(function);
+
+#define USB_UDC_SPEED_ATTR(name, param)					\
+ssize_t name##_show(struct device *dev,					\
+		struct device_attribute *attr, char *buf)		\
+{									\
+	struct usb_udc *udc = container_of(dev, struct usb_udc, dev);	\
+	return scnprintf(buf, PAGE_SIZE, "%s\n",			\
+			usb_speed_string(udc->gadget->param));		\
+}									\
+static DEVICE_ATTR_RO(name)
+
+static USB_UDC_SPEED_ATTR(current_speed, speed);
+static USB_UDC_SPEED_ATTR(maximum_speed, max_speed);
+
+#define USB_UDC_ATTR(name)					\
+ssize_t name##_show(struct device *dev,				\
+		struct device_attribute *attr, char *buf)	\
+{								\
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev); \
+	struct usb_gadget	*gadget = udc->gadget;		\
+								\
+	return scnprintf(buf, PAGE_SIZE, "%d\n", gadget->name);	\
+}								\
+static DEVICE_ATTR_RO(name)
+
+static USB_UDC_ATTR(is_otg);
+static USB_UDC_ATTR(is_a_peripheral);
+static USB_UDC_ATTR(b_hnp_enable);
+static USB_UDC_ATTR(a_hnp_support);
+static USB_UDC_ATTR(a_alt_hnp_support);
+static USB_UDC_ATTR(is_selfpowered);
+
+static struct attribute *usb_udc_attrs[] = {
+	&dev_attr_srp.attr,
+	&dev_attr_soft_connect.attr,
+	&dev_attr_state.attr,
+	&dev_attr_function.attr,
+	&dev_attr_current_speed.attr,
+	&dev_attr_maximum_speed.attr,
+
+	&dev_attr_is_otg.attr,
+	&dev_attr_is_a_peripheral.attr,
+	&dev_attr_b_hnp_enable.attr,
+	&dev_attr_a_hnp_support.attr,
+	&dev_attr_a_alt_hnp_support.attr,
+	&dev_attr_is_selfpowered.attr,
+	NULL,
+};
+
+static const struct attribute_group usb_udc_attr_group = {
+	.attrs = usb_udc_attrs,
+};
+
+static const struct attribute_group *usb_udc_attr_groups[] = {
+	&usb_udc_attr_group,
+	NULL,
+};
+
+static int usb_udc_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+	int			ret;
+
+	ret = add_uevent_var(env, "USB_UDC_NAME=%s", udc->gadget->name);
+	if (ret) {
+		dev_err(dev, "failed to add uevent USB_UDC_NAME\n");
+		return ret;
+	}
+
+	mutex_lock(&udc_lock);
+	if (udc->driver)
+		ret = add_uevent_var(env, "USB_UDC_DRIVER=%s",
+				udc->driver->function);
+	mutex_unlock(&udc_lock);
+	if (ret) {
+		dev_err(dev, "failed to add uevent USB_UDC_DRIVER\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct bus_type gadget_bus_type = {
+	.name = "gadget",
+	.probe = gadget_bind_driver,
+	.remove = gadget_unbind_driver,
+	.match = gadget_match_driver,
+};
+
+static int __init usb_udc_init(void)
+{
+	int rc;
+
+	udc_class = class_create(THIS_MODULE, "udc");
+	if (IS_ERR(udc_class)) {
+		pr_err("failed to create udc class --> %ld\n",
+				PTR_ERR(udc_class));
+		return PTR_ERR(udc_class);
+	}
+
+	udc_class->dev_uevent = usb_udc_uevent;
+
+	rc = bus_register(&gadget_bus_type);
+	if (rc)
+		class_destroy(udc_class);
+	return rc;
+}
+subsys_initcall(usb_udc_init);
+
+static void __exit usb_udc_exit(void)
+{
+	bus_unregister(&gadget_bus_type);
+	class_destroy(udc_class);
+}
+module_exit(usb_udc_exit);
+
+MODULE_DESCRIPTION("UDC Framework");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
new file mode 100644
index 000000000..899ac9f9c
--- /dev/null
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -0,0 +1,2909 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dummy_hcd.c -- Dummy/Loopback USB host and device emulator driver.
+ *
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
+ *
+ * Copyright (C) 2003 David Brownell
+ * Copyright (C) 2003-2005 Alan Stern
+ */
+
+
+/*
+ * This exposes a device side "USB gadget" API, driven by requests to a
+ * Linux-USB host controller driver.  USB traffic is simulated; there's
+ * no need for USB hardware.  Use this with two other drivers:
+ *
+ *  - Gadget driver, responding to requests (device);
+ *  - Host-side device driver, as already familiar in Linux.
+ *
+ * Having this all in one kernel can help some stages of development,
+ * bypassing some hardware (and driver) issues.  UML could help too.
+ *
+ * Note: The emulation does not include isochronous transfers!
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/hcd.h>
+#include <linux/scatterlist.h>
+
+#include <asm/byteorder.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/unaligned.h>
+
+#define DRIVER_DESC	"USB Host+Gadget Emulator"
+#define DRIVER_VERSION	"02 May 2005"
+
+#define POWER_BUDGET	500	/* in mA; use 8 for low-power port testing */
+#define POWER_BUDGET_3	900	/* in mA */
+
+static const char	driver_name[] = "dummy_hcd";
+static const char	driver_desc[] = "USB Host+Gadget Emulator";
+
+static const char	gadget_name[] = "dummy_udc";
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
+
+struct dummy_hcd_module_parameters {
+	bool is_super_speed;
+	bool is_high_speed;
+	unsigned int num;
+};
+
+static struct dummy_hcd_module_parameters mod_data = {
+	.is_super_speed = false,
+	.is_high_speed = true,
+	.num = 1,
+};
+module_param_named(is_super_speed, mod_data.is_super_speed, bool, S_IRUGO);
+MODULE_PARM_DESC(is_super_speed, "true to simulate SuperSpeed connection");
+module_param_named(is_high_speed, mod_data.is_high_speed, bool, S_IRUGO);
+MODULE_PARM_DESC(is_high_speed, "true to simulate HighSpeed connection");
+module_param_named(num, mod_data.num, uint, S_IRUGO);
+MODULE_PARM_DESC(num, "number of emulated controllers");
+/*-------------------------------------------------------------------------*/
+
+/* gadget side driver data structres */
+struct dummy_ep {
+	struct list_head		queue;
+	unsigned long			last_io;	/* jiffies timestamp */
+	struct usb_gadget		*gadget;
+	const struct usb_endpoint_descriptor *desc;
+	struct usb_ep			ep;
+	unsigned			halted:1;
+	unsigned			wedged:1;
+	unsigned			already_seen:1;
+	unsigned			setup_stage:1;
+	unsigned			stream_en:1;
+};
+
+struct dummy_request {
+	struct list_head		queue;		/* ep's requests */
+	struct usb_request		req;
+};
+
+static inline struct dummy_ep *usb_ep_to_dummy_ep(struct usb_ep *_ep)
+{
+	return container_of(_ep, struct dummy_ep, ep);
+}
+
+static inline struct dummy_request *usb_request_to_dummy_request
+		(struct usb_request *_req)
+{
+	return container_of(_req, struct dummy_request, req);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Every device has ep0 for control requests, plus up to 30 more endpoints,
+ * in one of two types:
+ *
+ *   - Configurable:  direction (in/out), type (bulk, iso, etc), and endpoint
+ *     number can be changed.  Names like "ep-a" are used for this type.
+ *
+ *   - Fixed Function:  in other cases.  some characteristics may be mutable;
+ *     that'd be hardware-specific.  Names like "ep12out-bulk" are used.
+ *
+ * Gadget drivers are responsible for not setting up conflicting endpoint
+ * configurations, illegal or unsupported packet lengths, and so on.
+ */
+
+static const char ep0name[] = "ep0";
+
+static const struct {
+	const char *name;
+	const struct usb_ep_caps caps;
+} ep_info[] = {
+#define EP_INFO(_name, _caps) \
+	{ \
+		.name = _name, \
+		.caps = _caps, \
+	}
+
+/* we don't provide isochronous endpoints since we don't support them */
+#define TYPE_BULK_OR_INT	(USB_EP_CAPS_TYPE_BULK | USB_EP_CAPS_TYPE_INT)
+
+	/* everyone has ep0 */
+	EP_INFO(ep0name,
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)),
+	/* act like a pxa250: fifteen fixed function endpoints */
+	EP_INFO("ep1in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep2out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+/*
+	EP_INFO("ep3in-iso",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep4out-iso",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)),
+*/
+	EP_INFO("ep5in-int",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep6in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep7out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+/*
+	EP_INFO("ep8in-iso",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep9out-iso",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)),
+*/
+	EP_INFO("ep10in-int",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep11in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep12out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+/*
+	EP_INFO("ep13in-iso",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep14out-iso",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)),
+*/
+	EP_INFO("ep15in-int",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
+
+	/* or like sa1100: two fixed function endpoints */
+	EP_INFO("ep1out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep2in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+
+	/* and now some generic EPs so we have enough in multi config */
+	EP_INFO("ep-aout",
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep-bin",
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep-cout",
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep-dout",
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep-ein",
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep-fout",
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep-gin",
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep-hout",
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep-iout",
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep-jin",
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep-kout",
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep-lin",
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep-mout",
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
+
+#undef EP_INFO
+};
+
+#define DUMMY_ENDPOINTS	ARRAY_SIZE(ep_info)
+
+/*-------------------------------------------------------------------------*/
+
+#define FIFO_SIZE		64
+
+struct urbp {
+	struct urb		*urb;
+	struct list_head	urbp_list;
+	struct sg_mapping_iter	miter;
+	u32			miter_started;
+};
+
+
+enum dummy_rh_state {
+	DUMMY_RH_RESET,
+	DUMMY_RH_SUSPENDED,
+	DUMMY_RH_RUNNING
+};
+
+struct dummy_hcd {
+	struct dummy			*dum;
+	enum dummy_rh_state		rh_state;
+	struct timer_list		timer;
+	u32				port_status;
+	u32				old_status;
+	unsigned long			re_timeout;
+
+	struct usb_device		*udev;
+	struct list_head		urbp_list;
+	struct urbp			*next_frame_urbp;
+
+	u32				stream_en_ep;
+	u8				num_stream[30 / 2];
+
+	unsigned			active:1;
+	unsigned			old_active:1;
+	unsigned			resuming:1;
+};
+
+struct dummy {
+	spinlock_t			lock;
+
+	/*
+	 * DEVICE/GADGET side support
+	 */
+	struct dummy_ep			ep[DUMMY_ENDPOINTS];
+	int				address;
+	int				callback_usage;
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	struct dummy_request		fifo_req;
+	u8				fifo_buf[FIFO_SIZE];
+	u16				devstatus;
+	unsigned			ints_enabled:1;
+	unsigned			udc_suspended:1;
+	unsigned			pullup:1;
+
+	/*
+	 * HOST side support
+	 */
+	struct dummy_hcd		*hs_hcd;
+	struct dummy_hcd		*ss_hcd;
+};
+
+static inline struct dummy_hcd *hcd_to_dummy_hcd(struct usb_hcd *hcd)
+{
+	return (struct dummy_hcd *) (hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *dummy_hcd_to_hcd(struct dummy_hcd *dum)
+{
+	return container_of((void *) dum, struct usb_hcd, hcd_priv);
+}
+
+static inline struct device *dummy_dev(struct dummy_hcd *dum)
+{
+	return dummy_hcd_to_hcd(dum)->self.controller;
+}
+
+static inline struct device *udc_dev(struct dummy *dum)
+{
+	return dum->gadget.dev.parent;
+}
+
+static inline struct dummy *ep_to_dummy(struct dummy_ep *ep)
+{
+	return container_of(ep->gadget, struct dummy, gadget);
+}
+
+static inline struct dummy_hcd *gadget_to_dummy_hcd(struct usb_gadget *gadget)
+{
+	struct dummy *dum = container_of(gadget, struct dummy, gadget);
+	if (dum->gadget.speed == USB_SPEED_SUPER)
+		return dum->ss_hcd;
+	else
+		return dum->hs_hcd;
+}
+
+static inline struct dummy *gadget_dev_to_dummy(struct device *dev)
+{
+	return container_of(dev, struct dummy, gadget.dev);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* DEVICE/GADGET SIDE UTILITY ROUTINES */
+
+/* called with spinlock held */
+static void nuke(struct dummy *dum, struct dummy_ep *ep)
+{
+	while (!list_empty(&ep->queue)) {
+		struct dummy_request	*req;
+
+		req = list_entry(ep->queue.next, struct dummy_request, queue);
+		list_del_init(&req->queue);
+		req->req.status = -ESHUTDOWN;
+
+		spin_unlock(&dum->lock);
+		usb_gadget_giveback_request(&ep->ep, &req->req);
+		spin_lock(&dum->lock);
+	}
+}
+
+/* caller must hold lock */
+static void stop_activity(struct dummy *dum)
+{
+	int i;
+
+	/* prevent any more requests */
+	dum->address = 0;
+
+	/* The timer is left running so that outstanding URBs can fail */
+
+	/* nuke any pending requests first, so driver i/o is quiesced */
+	for (i = 0; i < DUMMY_ENDPOINTS; ++i)
+		nuke(dum, &dum->ep[i]);
+
+	/* driver now does any non-usb quiescing necessary */
+}
+
+/**
+ * set_link_state_by_speed() - Sets the current state of the link according to
+ *	the hcd speed
+ * @dum_hcd: pointer to the dummy_hcd structure to update the link state for
+ *
+ * This function updates the port_status according to the link state and the
+ * speed of the hcd.
+ */
+static void set_link_state_by_speed(struct dummy_hcd *dum_hcd)
+{
+	struct dummy *dum = dum_hcd->dum;
+
+	if (dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3) {
+		if ((dum_hcd->port_status & USB_SS_PORT_STAT_POWER) == 0) {
+			dum_hcd->port_status = 0;
+		} else if (!dum->pullup || dum->udc_suspended) {
+			/* UDC suspend must cause a disconnect */
+			dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION |
+						USB_PORT_STAT_ENABLE);
+			if ((dum_hcd->old_status &
+			     USB_PORT_STAT_CONNECTION) != 0)
+				dum_hcd->port_status |=
+					(USB_PORT_STAT_C_CONNECTION << 16);
+		} else {
+			/* device is connected and not suspended */
+			dum_hcd->port_status |= (USB_PORT_STAT_CONNECTION |
+						 USB_PORT_STAT_SPEED_5GBPS) ;
+			if ((dum_hcd->old_status &
+			     USB_PORT_STAT_CONNECTION) == 0)
+				dum_hcd->port_status |=
+					(USB_PORT_STAT_C_CONNECTION << 16);
+			if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) &&
+			    (dum_hcd->port_status &
+			     USB_PORT_STAT_LINK_STATE) == USB_SS_PORT_LS_U0 &&
+			    dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
+				dum_hcd->active = 1;
+		}
+	} else {
+		if ((dum_hcd->port_status & USB_PORT_STAT_POWER) == 0) {
+			dum_hcd->port_status = 0;
+		} else if (!dum->pullup || dum->udc_suspended) {
+			/* UDC suspend must cause a disconnect */
+			dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION |
+						USB_PORT_STAT_ENABLE |
+						USB_PORT_STAT_LOW_SPEED |
+						USB_PORT_STAT_HIGH_SPEED |
+						USB_PORT_STAT_SUSPEND);
+			if ((dum_hcd->old_status &
+			     USB_PORT_STAT_CONNECTION) != 0)
+				dum_hcd->port_status |=
+					(USB_PORT_STAT_C_CONNECTION << 16);
+		} else {
+			dum_hcd->port_status |= USB_PORT_STAT_CONNECTION;
+			if ((dum_hcd->old_status &
+			     USB_PORT_STAT_CONNECTION) == 0)
+				dum_hcd->port_status |=
+					(USB_PORT_STAT_C_CONNECTION << 16);
+			if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0)
+				dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
+			else if ((dum_hcd->port_status &
+				  USB_PORT_STAT_SUSPEND) == 0 &&
+					dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
+				dum_hcd->active = 1;
+		}
+	}
+}
+
+/* caller must hold lock */
+static void set_link_state(struct dummy_hcd *dum_hcd)
+	__must_hold(&dum->lock)
+{
+	struct dummy *dum = dum_hcd->dum;
+	unsigned int power_bit;
+
+	dum_hcd->active = 0;
+	if (dum->pullup)
+		if ((dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3 &&
+		     dum->gadget.speed != USB_SPEED_SUPER) ||
+		    (dummy_hcd_to_hcd(dum_hcd)->speed != HCD_USB3 &&
+		     dum->gadget.speed == USB_SPEED_SUPER))
+			return;
+
+	set_link_state_by_speed(dum_hcd);
+	power_bit = (dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3 ?
+			USB_SS_PORT_STAT_POWER : USB_PORT_STAT_POWER);
+
+	if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0 ||
+	     dum_hcd->active)
+		dum_hcd->resuming = 0;
+
+	/* Currently !connected or in reset */
+	if ((dum_hcd->port_status & power_bit) == 0 ||
+			(dum_hcd->port_status & USB_PORT_STAT_RESET) != 0) {
+		unsigned int disconnect = power_bit &
+				dum_hcd->old_status & (~dum_hcd->port_status);
+		unsigned int reset = USB_PORT_STAT_RESET &
+				(~dum_hcd->old_status) & dum_hcd->port_status;
+
+		/* Report reset and disconnect events to the driver */
+		if (dum->ints_enabled && (disconnect || reset)) {
+			stop_activity(dum);
+			++dum->callback_usage;
+			spin_unlock(&dum->lock);
+			if (reset)
+				usb_gadget_udc_reset(&dum->gadget, dum->driver);
+			else
+				dum->driver->disconnect(&dum->gadget);
+			spin_lock(&dum->lock);
+			--dum->callback_usage;
+		}
+	} else if (dum_hcd->active != dum_hcd->old_active &&
+			dum->ints_enabled) {
+		++dum->callback_usage;
+		spin_unlock(&dum->lock);
+		if (dum_hcd->old_active && dum->driver->suspend)
+			dum->driver->suspend(&dum->gadget);
+		else if (!dum_hcd->old_active &&  dum->driver->resume)
+			dum->driver->resume(&dum->gadget);
+		spin_lock(&dum->lock);
+		--dum->callback_usage;
+	}
+
+	dum_hcd->old_status = dum_hcd->port_status;
+	dum_hcd->old_active = dum_hcd->active;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* DEVICE/GADGET SIDE DRIVER
+ *
+ * This only tracks gadget state.  All the work is done when the host
+ * side tries some (emulated) i/o operation.  Real device controller
+ * drivers would do real i/o using dma, fifos, irqs, timers, etc.
+ */
+
+#define is_enabled(dum) \
+	(dum->port_status & USB_PORT_STAT_ENABLE)
+
+static int dummy_enable(struct usb_ep *_ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct dummy		*dum;
+	struct dummy_hcd	*dum_hcd;
+	struct dummy_ep		*ep;
+	unsigned		max;
+	int			retval;
+
+	ep = usb_ep_to_dummy_ep(_ep);
+	if (!_ep || !desc || ep->desc || _ep->name == ep0name
+			|| desc->bDescriptorType != USB_DT_ENDPOINT)
+		return -EINVAL;
+	dum = ep_to_dummy(ep);
+	if (!dum->driver)
+		return -ESHUTDOWN;
+
+	dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
+	if (!is_enabled(dum_hcd))
+		return -ESHUTDOWN;
+
+	/*
+	 * For HS/FS devices only bits 0..10 of the wMaxPacketSize represent the
+	 * maximum packet size.
+	 * For SS devices the wMaxPacketSize is limited by 1024.
+	 */
+	max = usb_endpoint_maxp(desc);
+
+	/* drivers must not request bad settings, since lower levels
+	 * (hardware or its drivers) may not check.  some endpoints
+	 * can't do iso, many have maxpacket limitations, etc.
+	 *
+	 * since this "hardware" driver is here to help debugging, we
+	 * have some extra sanity checks.  (there could be more though,
+	 * especially for "ep9out" style fixed function ones.)
+	 */
+	retval = -EINVAL;
+	switch (usb_endpoint_type(desc)) {
+	case USB_ENDPOINT_XFER_BULK:
+		if (strstr(ep->ep.name, "-iso")
+				|| strstr(ep->ep.name, "-int")) {
+			goto done;
+		}
+		switch (dum->gadget.speed) {
+		case USB_SPEED_SUPER:
+			if (max == 1024)
+				break;
+			goto done;
+		case USB_SPEED_HIGH:
+			if (max == 512)
+				break;
+			goto done;
+		case USB_SPEED_FULL:
+			if (max == 8 || max == 16 || max == 32 || max == 64)
+				/* we'll fake any legal size */
+				break;
+			/* save a return statement */
+			fallthrough;
+		default:
+			goto done;
+		}
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
+			goto done;
+		/* real hardware might not handle all packet sizes */
+		switch (dum->gadget.speed) {
+		case USB_SPEED_SUPER:
+		case USB_SPEED_HIGH:
+			if (max <= 1024)
+				break;
+			/* save a return statement */
+			fallthrough;
+		case USB_SPEED_FULL:
+			if (max <= 64)
+				break;
+			/* save a return statement */
+			fallthrough;
+		default:
+			if (max <= 8)
+				break;
+			goto done;
+		}
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (strstr(ep->ep.name, "-bulk")
+				|| strstr(ep->ep.name, "-int"))
+			goto done;
+		/* real hardware might not handle all packet sizes */
+		switch (dum->gadget.speed) {
+		case USB_SPEED_SUPER:
+		case USB_SPEED_HIGH:
+			if (max <= 1024)
+				break;
+			/* save a return statement */
+			fallthrough;
+		case USB_SPEED_FULL:
+			if (max <= 1023)
+				break;
+			/* save a return statement */
+			fallthrough;
+		default:
+			goto done;
+		}
+		break;
+	default:
+		/* few chips support control except on ep0 */
+		goto done;
+	}
+
+	_ep->maxpacket = max;
+	if (usb_ss_max_streams(_ep->comp_desc)) {
+		if (!usb_endpoint_xfer_bulk(desc)) {
+			dev_err(udc_dev(dum), "Can't enable stream support on "
+					"non-bulk ep %s\n", _ep->name);
+			return -EINVAL;
+		}
+		ep->stream_en = 1;
+	}
+	ep->desc = desc;
+
+	dev_dbg(udc_dev(dum), "enabled %s (ep%d%s-%s) maxpacket %d stream %s\n",
+		_ep->name,
+		desc->bEndpointAddress & 0x0f,
+		(desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
+		usb_ep_type_string(usb_endpoint_type(desc)),
+		max, ep->stream_en ? "enabled" : "disabled");
+
+	/* at this point real hardware should be NAKing transfers
+	 * to that endpoint, until a buffer is queued to it.
+	 */
+	ep->halted = ep->wedged = 0;
+	retval = 0;
+done:
+	return retval;
+}
+
+static int dummy_disable(struct usb_ep *_ep)
+{
+	struct dummy_ep		*ep;
+	struct dummy		*dum;
+	unsigned long		flags;
+
+	ep = usb_ep_to_dummy_ep(_ep);
+	if (!_ep || !ep->desc || _ep->name == ep0name)
+		return -EINVAL;
+	dum = ep_to_dummy(ep);
+
+	spin_lock_irqsave(&dum->lock, flags);
+	ep->desc = NULL;
+	ep->stream_en = 0;
+	nuke(dum, ep);
+	spin_unlock_irqrestore(&dum->lock, flags);
+
+	dev_dbg(udc_dev(dum), "disabled %s\n", _ep->name);
+	return 0;
+}
+
+static struct usb_request *dummy_alloc_request(struct usb_ep *_ep,
+		gfp_t mem_flags)
+{
+	struct dummy_request	*req;
+
+	if (!_ep)
+		return NULL;
+
+	req = kzalloc(sizeof(*req), mem_flags);
+	if (!req)
+		return NULL;
+	INIT_LIST_HEAD(&req->queue);
+	return &req->req;
+}
+
+static void dummy_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct dummy_request	*req;
+
+	if (!_ep || !_req) {
+		WARN_ON(1);
+		return;
+	}
+
+	req = usb_request_to_dummy_request(_req);
+	WARN_ON(!list_empty(&req->queue));
+	kfree(req);
+}
+
+static void fifo_complete(struct usb_ep *ep, struct usb_request *req)
+{
+}
+
+static int dummy_queue(struct usb_ep *_ep, struct usb_request *_req,
+		gfp_t mem_flags)
+{
+	struct dummy_ep		*ep;
+	struct dummy_request	*req;
+	struct dummy		*dum;
+	struct dummy_hcd	*dum_hcd;
+	unsigned long		flags;
+
+	req = usb_request_to_dummy_request(_req);
+	if (!_req || !list_empty(&req->queue) || !_req->complete)
+		return -EINVAL;
+
+	ep = usb_ep_to_dummy_ep(_ep);
+	if (!_ep || (!ep->desc && _ep->name != ep0name))
+		return -EINVAL;
+
+	dum = ep_to_dummy(ep);
+	dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
+	if (!dum->driver || !is_enabled(dum_hcd))
+		return -ESHUTDOWN;
+
+#if 0
+	dev_dbg(udc_dev(dum), "ep %p queue req %p to %s, len %d buf %p\n",
+			ep, _req, _ep->name, _req->length, _req->buf);
+#endif
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+	spin_lock_irqsave(&dum->lock, flags);
+
+	/* implement an emulated single-request FIFO */
+	if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) &&
+			list_empty(&dum->fifo_req.queue) &&
+			list_empty(&ep->queue) &&
+			_req->length <= FIFO_SIZE) {
+		req = &dum->fifo_req;
+		req->req = *_req;
+		req->req.buf = dum->fifo_buf;
+		memcpy(dum->fifo_buf, _req->buf, _req->length);
+		req->req.context = dum;
+		req->req.complete = fifo_complete;
+
+		list_add_tail(&req->queue, &ep->queue);
+		spin_unlock(&dum->lock);
+		_req->actual = _req->length;
+		_req->status = 0;
+		usb_gadget_giveback_request(_ep, _req);
+		spin_lock(&dum->lock);
+	}  else
+		list_add_tail(&req->queue, &ep->queue);
+	spin_unlock_irqrestore(&dum->lock, flags);
+
+	/* real hardware would likely enable transfers here, in case
+	 * it'd been left NAKing.
+	 */
+	return 0;
+}
+
+static int dummy_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct dummy_ep		*ep;
+	struct dummy		*dum;
+	int			retval = -EINVAL;
+	unsigned long		flags;
+	struct dummy_request	*req = NULL, *iter;
+
+	if (!_ep || !_req)
+		return retval;
+	ep = usb_ep_to_dummy_ep(_ep);
+	dum = ep_to_dummy(ep);
+
+	if (!dum->driver)
+		return -ESHUTDOWN;
+
+	local_irq_save(flags);
+	spin_lock(&dum->lock);
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		list_del_init(&iter->queue);
+		_req->status = -ECONNRESET;
+		req = iter;
+		retval = 0;
+		break;
+	}
+	spin_unlock(&dum->lock);
+
+	if (retval == 0) {
+		dev_dbg(udc_dev(dum),
+				"dequeued req %p from %s, len %d buf %p\n",
+				req, _ep->name, _req->length, _req->buf);
+		usb_gadget_giveback_request(_ep, _req);
+	}
+	local_irq_restore(flags);
+	return retval;
+}
+
+static int
+dummy_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
+{
+	struct dummy_ep		*ep;
+	struct dummy		*dum;
+
+	if (!_ep)
+		return -EINVAL;
+	ep = usb_ep_to_dummy_ep(_ep);
+	dum = ep_to_dummy(ep);
+	if (!dum->driver)
+		return -ESHUTDOWN;
+	if (!value)
+		ep->halted = ep->wedged = 0;
+	else if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) &&
+			!list_empty(&ep->queue))
+		return -EAGAIN;
+	else {
+		ep->halted = 1;
+		if (wedged)
+			ep->wedged = 1;
+	}
+	/* FIXME clear emulated data toggle too */
+	return 0;
+}
+
+static int
+dummy_set_halt(struct usb_ep *_ep, int value)
+{
+	return dummy_set_halt_and_wedge(_ep, value, 0);
+}
+
+static int dummy_set_wedge(struct usb_ep *_ep)
+{
+	if (!_ep || _ep->name == ep0name)
+		return -EINVAL;
+	return dummy_set_halt_and_wedge(_ep, 1, 1);
+}
+
+static const struct usb_ep_ops dummy_ep_ops = {
+	.enable		= dummy_enable,
+	.disable	= dummy_disable,
+
+	.alloc_request	= dummy_alloc_request,
+	.free_request	= dummy_free_request,
+
+	.queue		= dummy_queue,
+	.dequeue	= dummy_dequeue,
+
+	.set_halt	= dummy_set_halt,
+	.set_wedge	= dummy_set_wedge,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* there are both host and device side versions of this call ... */
+static int dummy_g_get_frame(struct usb_gadget *_gadget)
+{
+	struct timespec64 ts64;
+
+	ktime_get_ts64(&ts64);
+	return ts64.tv_nsec / NSEC_PER_MSEC;
+}
+
+static int dummy_wakeup(struct usb_gadget *_gadget)
+{
+	struct dummy_hcd *dum_hcd;
+
+	dum_hcd = gadget_to_dummy_hcd(_gadget);
+	if (!(dum_hcd->dum->devstatus & ((1 << USB_DEVICE_B_HNP_ENABLE)
+				| (1 << USB_DEVICE_REMOTE_WAKEUP))))
+		return -EINVAL;
+	if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0)
+		return -ENOLINK;
+	if ((dum_hcd->port_status & USB_PORT_STAT_SUSPEND) == 0 &&
+			 dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
+		return -EIO;
+
+	/* FIXME: What if the root hub is suspended but the port isn't? */
+
+	/* hub notices our request, issues downstream resume, etc */
+	dum_hcd->resuming = 1;
+	dum_hcd->re_timeout = jiffies + msecs_to_jiffies(20);
+	mod_timer(&dummy_hcd_to_hcd(dum_hcd)->rh_timer, dum_hcd->re_timeout);
+	return 0;
+}
+
+static int dummy_set_selfpowered(struct usb_gadget *_gadget, int value)
+{
+	struct dummy	*dum;
+
+	_gadget->is_selfpowered = (value != 0);
+	dum = gadget_to_dummy_hcd(_gadget)->dum;
+	if (value)
+		dum->devstatus |= (1 << USB_DEVICE_SELF_POWERED);
+	else
+		dum->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
+	return 0;
+}
+
+static void dummy_udc_update_ep0(struct dummy *dum)
+{
+	if (dum->gadget.speed == USB_SPEED_SUPER)
+		dum->ep[0].ep.maxpacket = 9;
+	else
+		dum->ep[0].ep.maxpacket = 64;
+}
+
+static int dummy_pullup(struct usb_gadget *_gadget, int value)
+{
+	struct dummy_hcd *dum_hcd;
+	struct dummy	*dum;
+	unsigned long	flags;
+
+	dum = gadget_dev_to_dummy(&_gadget->dev);
+	dum_hcd = gadget_to_dummy_hcd(_gadget);
+
+	spin_lock_irqsave(&dum->lock, flags);
+	dum->pullup = (value != 0);
+	set_link_state(dum_hcd);
+	if (value == 0) {
+		/*
+		 * Emulate synchronize_irq(): wait for callbacks to finish.
+		 * This seems to be the best place to emulate the call to
+		 * synchronize_irq() that's in usb_gadget_remove_driver().
+		 * Doing it in dummy_udc_stop() would be too late since it
+		 * is called after the unbind callback and unbind shouldn't
+		 * be invoked until all the other callbacks are finished.
+		 */
+		while (dum->callback_usage > 0) {
+			spin_unlock_irqrestore(&dum->lock, flags);
+			usleep_range(1000, 2000);
+			spin_lock_irqsave(&dum->lock, flags);
+		}
+	}
+	spin_unlock_irqrestore(&dum->lock, flags);
+
+	usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
+	return 0;
+}
+
+static void dummy_udc_set_speed(struct usb_gadget *_gadget,
+		enum usb_device_speed speed)
+{
+	struct dummy	*dum;
+
+	dum = gadget_dev_to_dummy(&_gadget->dev);
+	dum->gadget.speed = speed;
+	dummy_udc_update_ep0(dum);
+}
+
+static void dummy_udc_async_callbacks(struct usb_gadget *_gadget, bool enable)
+{
+	struct dummy	*dum = gadget_dev_to_dummy(&_gadget->dev);
+
+	spin_lock_irq(&dum->lock);
+	dum->ints_enabled = enable;
+	spin_unlock_irq(&dum->lock);
+}
+
+static int dummy_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+static int dummy_udc_stop(struct usb_gadget *g);
+
+static const struct usb_gadget_ops dummy_ops = {
+	.get_frame	= dummy_g_get_frame,
+	.wakeup		= dummy_wakeup,
+	.set_selfpowered = dummy_set_selfpowered,
+	.pullup		= dummy_pullup,
+	.udc_start	= dummy_udc_start,
+	.udc_stop	= dummy_udc_stop,
+	.udc_set_speed	= dummy_udc_set_speed,
+	.udc_async_callbacks = dummy_udc_async_callbacks,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* "function" sysfs attribute */
+static ssize_t function_show(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct dummy	*dum = gadget_dev_to_dummy(dev);
+
+	if (!dum->driver || !dum->driver->function)
+		return 0;
+	return scnprintf(buf, PAGE_SIZE, "%s\n", dum->driver->function);
+}
+static DEVICE_ATTR_RO(function);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Driver registration/unregistration.
+ *
+ * This is basically hardware-specific; there's usually only one real USB
+ * device (not host) controller since that's how USB devices are intended
+ * to work.  So most implementations of these api calls will rely on the
+ * fact that only one driver will ever bind to the hardware.  But curious
+ * hardware can be built with discrete components, so the gadget API doesn't
+ * require that assumption.
+ *
+ * For this emulator, it might be convenient to create a usb device
+ * for each driver that registers:  just add to a big root hub.
+ */
+
+static int dummy_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct dummy_hcd	*dum_hcd = gadget_to_dummy_hcd(g);
+	struct dummy		*dum = dum_hcd->dum;
+
+	switch (g->speed) {
+	/* All the speeds we support */
+	case USB_SPEED_LOW:
+	case USB_SPEED_FULL:
+	case USB_SPEED_HIGH:
+	case USB_SPEED_SUPER:
+		break;
+	default:
+		dev_err(dummy_dev(dum_hcd), "Unsupported driver max speed %d\n",
+				driver->max_speed);
+		return -EINVAL;
+	}
+
+	/*
+	 * DEVICE side init ... the layer above hardware, which
+	 * can't enumerate without help from the driver we're binding.
+	 */
+
+	spin_lock_irq(&dum->lock);
+	dum->devstatus = 0;
+	dum->driver = driver;
+	spin_unlock_irq(&dum->lock);
+
+	return 0;
+}
+
+static int dummy_udc_stop(struct usb_gadget *g)
+{
+	struct dummy_hcd	*dum_hcd = gadget_to_dummy_hcd(g);
+	struct dummy		*dum = dum_hcd->dum;
+
+	spin_lock_irq(&dum->lock);
+	dum->ints_enabled = 0;
+	stop_activity(dum);
+	dum->driver = NULL;
+	spin_unlock_irq(&dum->lock);
+
+	return 0;
+}
+
+#undef is_enabled
+
+/* The gadget structure is stored inside the hcd structure and will be
+ * released along with it. */
+static void init_dummy_udc_hw(struct dummy *dum)
+{
+	int i;
+
+	INIT_LIST_HEAD(&dum->gadget.ep_list);
+	for (i = 0; i < DUMMY_ENDPOINTS; i++) {
+		struct dummy_ep	*ep = &dum->ep[i];
+
+		if (!ep_info[i].name)
+			break;
+		ep->ep.name = ep_info[i].name;
+		ep->ep.caps = ep_info[i].caps;
+		ep->ep.ops = &dummy_ep_ops;
+		list_add_tail(&ep->ep.ep_list, &dum->gadget.ep_list);
+		ep->halted = ep->wedged = ep->already_seen =
+				ep->setup_stage = 0;
+		usb_ep_set_maxpacket_limit(&ep->ep, ~0);
+		ep->ep.max_streams = 16;
+		ep->last_io = jiffies;
+		ep->gadget = &dum->gadget;
+		ep->desc = NULL;
+		INIT_LIST_HEAD(&ep->queue);
+	}
+
+	dum->gadget.ep0 = &dum->ep[0].ep;
+	list_del_init(&dum->ep[0].ep.ep_list);
+	INIT_LIST_HEAD(&dum->fifo_req.queue);
+
+#ifdef CONFIG_USB_OTG
+	dum->gadget.is_otg = 1;
+#endif
+}
+
+static int dummy_udc_probe(struct platform_device *pdev)
+{
+	struct dummy	*dum;
+	int		rc;
+
+	dum = *((void **)dev_get_platdata(&pdev->dev));
+	/* Clear usb_gadget region for new registration to udc-core */
+	memzero_explicit(&dum->gadget, sizeof(struct usb_gadget));
+	dum->gadget.name = gadget_name;
+	dum->gadget.ops = &dummy_ops;
+	if (mod_data.is_super_speed)
+		dum->gadget.max_speed = USB_SPEED_SUPER;
+	else if (mod_data.is_high_speed)
+		dum->gadget.max_speed = USB_SPEED_HIGH;
+	else
+		dum->gadget.max_speed = USB_SPEED_FULL;
+
+	dum->gadget.dev.parent = &pdev->dev;
+	init_dummy_udc_hw(dum);
+
+	rc = usb_add_gadget_udc(&pdev->dev, &dum->gadget);
+	if (rc < 0)
+		goto err_udc;
+
+	rc = device_create_file(&dum->gadget.dev, &dev_attr_function);
+	if (rc < 0)
+		goto err_dev;
+	platform_set_drvdata(pdev, dum);
+	return rc;
+
+err_dev:
+	usb_del_gadget_udc(&dum->gadget);
+err_udc:
+	return rc;
+}
+
+static int dummy_udc_remove(struct platform_device *pdev)
+{
+	struct dummy	*dum = platform_get_drvdata(pdev);
+
+	device_remove_file(&dum->gadget.dev, &dev_attr_function);
+	usb_del_gadget_udc(&dum->gadget);
+	return 0;
+}
+
+static void dummy_udc_pm(struct dummy *dum, struct dummy_hcd *dum_hcd,
+		int suspend)
+{
+	spin_lock_irq(&dum->lock);
+	dum->udc_suspended = suspend;
+	set_link_state(dum_hcd);
+	spin_unlock_irq(&dum->lock);
+}
+
+static int dummy_udc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct dummy		*dum = platform_get_drvdata(pdev);
+	struct dummy_hcd	*dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
+
+	dev_dbg(&pdev->dev, "%s\n", __func__);
+	dummy_udc_pm(dum, dum_hcd, 1);
+	usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
+	return 0;
+}
+
+static int dummy_udc_resume(struct platform_device *pdev)
+{
+	struct dummy		*dum = platform_get_drvdata(pdev);
+	struct dummy_hcd	*dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
+
+	dev_dbg(&pdev->dev, "%s\n", __func__);
+	dummy_udc_pm(dum, dum_hcd, 0);
+	usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
+	return 0;
+}
+
+static struct platform_driver dummy_udc_driver = {
+	.probe		= dummy_udc_probe,
+	.remove		= dummy_udc_remove,
+	.suspend	= dummy_udc_suspend,
+	.resume		= dummy_udc_resume,
+	.driver		= {
+		.name	= gadget_name,
+	},
+};
+
+/*-------------------------------------------------------------------------*/
+
+static unsigned int dummy_get_ep_idx(const struct usb_endpoint_descriptor *desc)
+{
+	unsigned int index;
+
+	index = usb_endpoint_num(desc) << 1;
+	if (usb_endpoint_dir_in(desc))
+		index |= 1;
+	return index;
+}
+
+/* HOST SIDE DRIVER
+ *
+ * this uses the hcd framework to hook up to host side drivers.
+ * its root hub will only have one device, otherwise it acts like
+ * a normal host controller.
+ *
+ * when urbs are queued, they're just stuck on a list that we
+ * scan in a timer callback.  that callback connects writes from
+ * the host with reads from the device, and so on, based on the
+ * usb 2.0 rules.
+ */
+
+static int dummy_ep_stream_en(struct dummy_hcd *dum_hcd, struct urb *urb)
+{
+	const struct usb_endpoint_descriptor *desc = &urb->ep->desc;
+	u32 index;
+
+	if (!usb_endpoint_xfer_bulk(desc))
+		return 0;
+
+	index = dummy_get_ep_idx(desc);
+	return (1 << index) & dum_hcd->stream_en_ep;
+}
+
+/*
+ * The max stream number is saved as a nibble so for the 30 possible endpoints
+ * we only 15 bytes of memory. Therefore we are limited to max 16 streams (0
+ * means we use only 1 stream). The maximum according to the spec is 16bit so
+ * if the 16 stream limit is about to go, the array size should be incremented
+ * to 30 elements of type u16.
+ */
+static int get_max_streams_for_pipe(struct dummy_hcd *dum_hcd,
+		unsigned int pipe)
+{
+	int max_streams;
+
+	max_streams = dum_hcd->num_stream[usb_pipeendpoint(pipe)];
+	if (usb_pipeout(pipe))
+		max_streams >>= 4;
+	else
+		max_streams &= 0xf;
+	max_streams++;
+	return max_streams;
+}
+
+static void set_max_streams_for_pipe(struct dummy_hcd *dum_hcd,
+		unsigned int pipe, unsigned int streams)
+{
+	int max_streams;
+
+	streams--;
+	max_streams = dum_hcd->num_stream[usb_pipeendpoint(pipe)];
+	if (usb_pipeout(pipe)) {
+		streams <<= 4;
+		max_streams &= 0xf;
+	} else {
+		max_streams &= 0xf0;
+	}
+	max_streams |= streams;
+	dum_hcd->num_stream[usb_pipeendpoint(pipe)] = max_streams;
+}
+
+static int dummy_validate_stream(struct dummy_hcd *dum_hcd, struct urb *urb)
+{
+	unsigned int max_streams;
+	int enabled;
+
+	enabled = dummy_ep_stream_en(dum_hcd, urb);
+	if (!urb->stream_id) {
+		if (enabled)
+			return -EINVAL;
+		return 0;
+	}
+	if (!enabled)
+		return -EINVAL;
+
+	max_streams = get_max_streams_for_pipe(dum_hcd,
+			usb_pipeendpoint(urb->pipe));
+	if (urb->stream_id > max_streams) {
+		dev_err(dummy_dev(dum_hcd), "Stream id %d is out of range.\n",
+				urb->stream_id);
+		BUG();
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int dummy_urb_enqueue(
+	struct usb_hcd			*hcd,
+	struct urb			*urb,
+	gfp_t				mem_flags
+) {
+	struct dummy_hcd *dum_hcd;
+	struct urbp	*urbp;
+	unsigned long	flags;
+	int		rc;
+
+	urbp = kmalloc(sizeof *urbp, mem_flags);
+	if (!urbp)
+		return -ENOMEM;
+	urbp->urb = urb;
+	urbp->miter_started = 0;
+
+	dum_hcd = hcd_to_dummy_hcd(hcd);
+	spin_lock_irqsave(&dum_hcd->dum->lock, flags);
+
+	rc = dummy_validate_stream(dum_hcd, urb);
+	if (rc) {
+		kfree(urbp);
+		goto done;
+	}
+
+	rc = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (rc) {
+		kfree(urbp);
+		goto done;
+	}
+
+	if (!dum_hcd->udev) {
+		dum_hcd->udev = urb->dev;
+		usb_get_dev(dum_hcd->udev);
+	} else if (unlikely(dum_hcd->udev != urb->dev))
+		dev_err(dummy_dev(dum_hcd), "usb_device address has changed!\n");
+
+	list_add_tail(&urbp->urbp_list, &dum_hcd->urbp_list);
+	urb->hcpriv = urbp;
+	if (!dum_hcd->next_frame_urbp)
+		dum_hcd->next_frame_urbp = urbp;
+	if (usb_pipetype(urb->pipe) == PIPE_CONTROL)
+		urb->error_count = 1;		/* mark as a new urb */
+
+	/* kick the scheduler, it'll do the rest */
+	if (!timer_pending(&dum_hcd->timer))
+		mod_timer(&dum_hcd->timer, jiffies + 1);
+
+ done:
+	spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
+	return rc;
+}
+
+static int dummy_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct dummy_hcd *dum_hcd;
+	unsigned long	flags;
+	int		rc;
+
+	/* giveback happens automatically in timer callback,
+	 * so make sure the callback happens */
+	dum_hcd = hcd_to_dummy_hcd(hcd);
+	spin_lock_irqsave(&dum_hcd->dum->lock, flags);
+
+	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (!rc && dum_hcd->rh_state != DUMMY_RH_RUNNING &&
+			!list_empty(&dum_hcd->urbp_list))
+		mod_timer(&dum_hcd->timer, jiffies);
+
+	spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
+	return rc;
+}
+
+static int dummy_perform_transfer(struct urb *urb, struct dummy_request *req,
+		u32 len)
+{
+	void *ubuf, *rbuf;
+	struct urbp *urbp = urb->hcpriv;
+	int to_host;
+	struct sg_mapping_iter *miter = &urbp->miter;
+	u32 trans = 0;
+	u32 this_sg;
+	bool next_sg;
+
+	to_host = usb_urb_dir_in(urb);
+	rbuf = req->req.buf + req->req.actual;
+
+	if (!urb->num_sgs) {
+		ubuf = urb->transfer_buffer + urb->actual_length;
+		if (to_host)
+			memcpy(ubuf, rbuf, len);
+		else
+			memcpy(rbuf, ubuf, len);
+		return len;
+	}
+
+	if (!urbp->miter_started) {
+		u32 flags = SG_MITER_ATOMIC;
+
+		if (to_host)
+			flags |= SG_MITER_TO_SG;
+		else
+			flags |= SG_MITER_FROM_SG;
+
+		sg_miter_start(miter, urb->sg, urb->num_sgs, flags);
+		urbp->miter_started = 1;
+	}
+	next_sg = sg_miter_next(miter);
+	if (next_sg == false) {
+		WARN_ON_ONCE(1);
+		return -EINVAL;
+	}
+	do {
+		ubuf = miter->addr;
+		this_sg = min_t(u32, len, miter->length);
+		miter->consumed = this_sg;
+		trans += this_sg;
+
+		if (to_host)
+			memcpy(ubuf, rbuf, this_sg);
+		else
+			memcpy(rbuf, ubuf, this_sg);
+		len -= this_sg;
+
+		if (!len)
+			break;
+		next_sg = sg_miter_next(miter);
+		if (next_sg == false) {
+			WARN_ON_ONCE(1);
+			return -EINVAL;
+		}
+
+		rbuf += this_sg;
+	} while (1);
+
+	sg_miter_stop(miter);
+	return trans;
+}
+
+/* transfer up to a frame's worth; caller must own lock */
+static int transfer(struct dummy_hcd *dum_hcd, struct urb *urb,
+		struct dummy_ep *ep, int limit, int *status)
+{
+	struct dummy		*dum = dum_hcd->dum;
+	struct dummy_request	*req;
+	int			sent = 0;
+
+top:
+	/* if there's no request queued, the device is NAKing; return */
+	list_for_each_entry(req, &ep->queue, queue) {
+		unsigned	host_len, dev_len, len;
+		int		is_short, to_host;
+		int		rescan = 0;
+
+		if (dummy_ep_stream_en(dum_hcd, urb)) {
+			if ((urb->stream_id != req->req.stream_id))
+				continue;
+		}
+
+		/* 1..N packets of ep->ep.maxpacket each ... the last one
+		 * may be short (including zero length).
+		 *
+		 * writer can send a zlp explicitly (length 0) or implicitly
+		 * (length mod maxpacket zero, and 'zero' flag); they always
+		 * terminate reads.
+		 */
+		host_len = urb->transfer_buffer_length - urb->actual_length;
+		dev_len = req->req.length - req->req.actual;
+		len = min(host_len, dev_len);
+
+		/* FIXME update emulated data toggle too */
+
+		to_host = usb_urb_dir_in(urb);
+		if (unlikely(len == 0))
+			is_short = 1;
+		else {
+			/* not enough bandwidth left? */
+			if (limit < ep->ep.maxpacket && limit < len)
+				break;
+			len = min_t(unsigned, len, limit);
+			if (len == 0)
+				break;
+
+			/* send multiple of maxpacket first, then remainder */
+			if (len >= ep->ep.maxpacket) {
+				is_short = 0;
+				if (len % ep->ep.maxpacket)
+					rescan = 1;
+				len -= len % ep->ep.maxpacket;
+			} else {
+				is_short = 1;
+			}
+
+			len = dummy_perform_transfer(urb, req, len);
+
+			ep->last_io = jiffies;
+			if ((int)len < 0) {
+				req->req.status = len;
+			} else {
+				limit -= len;
+				sent += len;
+				urb->actual_length += len;
+				req->req.actual += len;
+			}
+		}
+
+		/* short packets terminate, maybe with overflow/underflow.
+		 * it's only really an error to write too much.
+		 *
+		 * partially filling a buffer optionally blocks queue advances
+		 * (so completion handlers can clean up the queue) but we don't
+		 * need to emulate such data-in-flight.
+		 */
+		if (is_short) {
+			if (host_len == dev_len) {
+				req->req.status = 0;
+				*status = 0;
+			} else if (to_host) {
+				req->req.status = 0;
+				if (dev_len > host_len)
+					*status = -EOVERFLOW;
+				else
+					*status = 0;
+			} else {
+				*status = 0;
+				if (host_len > dev_len)
+					req->req.status = -EOVERFLOW;
+				else
+					req->req.status = 0;
+			}
+
+		/*
+		 * many requests terminate without a short packet.
+		 * send a zlp if demanded by flags.
+		 */
+		} else {
+			if (req->req.length == req->req.actual) {
+				if (req->req.zero && to_host)
+					rescan = 1;
+				else
+					req->req.status = 0;
+			}
+			if (urb->transfer_buffer_length == urb->actual_length) {
+				if (urb->transfer_flags & URB_ZERO_PACKET &&
+				    !to_host)
+					rescan = 1;
+				else
+					*status = 0;
+			}
+		}
+
+		/* device side completion --> continuable */
+		if (req->req.status != -EINPROGRESS) {
+			list_del_init(&req->queue);
+
+			spin_unlock(&dum->lock);
+			usb_gadget_giveback_request(&ep->ep, &req->req);
+			spin_lock(&dum->lock);
+
+			/* requests might have been unlinked... */
+			rescan = 1;
+		}
+
+		/* host side completion --> terminate */
+		if (*status != -EINPROGRESS)
+			break;
+
+		/* rescan to continue with any other queued i/o */
+		if (rescan)
+			goto top;
+	}
+	return sent;
+}
+
+static int periodic_bytes(struct dummy *dum, struct dummy_ep *ep)
+{
+	int	limit = ep->ep.maxpacket;
+
+	if (dum->gadget.speed == USB_SPEED_HIGH) {
+		int	tmp;
+
+		/* high bandwidth mode */
+		tmp = usb_endpoint_maxp_mult(ep->desc);
+		tmp *= 8 /* applies to entire frame */;
+		limit += limit * tmp;
+	}
+	if (dum->gadget.speed == USB_SPEED_SUPER) {
+		switch (usb_endpoint_type(ep->desc)) {
+		case USB_ENDPOINT_XFER_ISOC:
+			/* Sec. 4.4.8.2 USB3.0 Spec */
+			limit = 3 * 16 * 1024 * 8;
+			break;
+		case USB_ENDPOINT_XFER_INT:
+			/* Sec. 4.4.7.2 USB3.0 Spec */
+			limit = 3 * 1024 * 8;
+			break;
+		case USB_ENDPOINT_XFER_BULK:
+		default:
+			break;
+		}
+	}
+	return limit;
+}
+
+#define is_active(dum_hcd)	((dum_hcd->port_status & \
+		(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE | \
+			USB_PORT_STAT_SUSPEND)) \
+		== (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE))
+
+static struct dummy_ep *find_endpoint(struct dummy *dum, u8 address)
+{
+	int		i;
+
+	if (!is_active((dum->gadget.speed == USB_SPEED_SUPER ?
+			dum->ss_hcd : dum->hs_hcd)))
+		return NULL;
+	if (!dum->ints_enabled)
+		return NULL;
+	if ((address & ~USB_DIR_IN) == 0)
+		return &dum->ep[0];
+	for (i = 1; i < DUMMY_ENDPOINTS; i++) {
+		struct dummy_ep	*ep = &dum->ep[i];
+
+		if (!ep->desc)
+			continue;
+		if (ep->desc->bEndpointAddress == address)
+			return ep;
+	}
+	return NULL;
+}
+
+#undef is_active
+
+#define Dev_Request	(USB_TYPE_STANDARD | USB_RECIP_DEVICE)
+#define Dev_InRequest	(Dev_Request | USB_DIR_IN)
+#define Intf_Request	(USB_TYPE_STANDARD | USB_RECIP_INTERFACE)
+#define Intf_InRequest	(Intf_Request | USB_DIR_IN)
+#define Ep_Request	(USB_TYPE_STANDARD | USB_RECIP_ENDPOINT)
+#define Ep_InRequest	(Ep_Request | USB_DIR_IN)
+
+
+/**
+ * handle_control_request() - handles all control transfers
+ * @dum_hcd: pointer to dummy (the_controller)
+ * @urb: the urb request to handle
+ * @setup: pointer to the setup data for a USB device control
+ *	 request
+ * @status: pointer to request handling status
+ *
+ * Return 0 - if the request was handled
+ *	  1 - if the request wasn't handles
+ *	  error code on error
+ */
+static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb,
+				  struct usb_ctrlrequest *setup,
+				  int *status)
+{
+	struct dummy_ep		*ep2;
+	struct dummy		*dum = dum_hcd->dum;
+	int			ret_val = 1;
+	unsigned	w_index;
+	unsigned	w_value;
+
+	w_index = le16_to_cpu(setup->wIndex);
+	w_value = le16_to_cpu(setup->wValue);
+	switch (setup->bRequest) {
+	case USB_REQ_SET_ADDRESS:
+		if (setup->bRequestType != Dev_Request)
+			break;
+		dum->address = w_value;
+		*status = 0;
+		dev_dbg(udc_dev(dum), "set_address = %d\n",
+				w_value);
+		ret_val = 0;
+		break;
+	case USB_REQ_SET_FEATURE:
+		if (setup->bRequestType == Dev_Request) {
+			ret_val = 0;
+			switch (w_value) {
+			case USB_DEVICE_REMOTE_WAKEUP:
+				break;
+			case USB_DEVICE_B_HNP_ENABLE:
+				dum->gadget.b_hnp_enable = 1;
+				break;
+			case USB_DEVICE_A_HNP_SUPPORT:
+				dum->gadget.a_hnp_support = 1;
+				break;
+			case USB_DEVICE_A_ALT_HNP_SUPPORT:
+				dum->gadget.a_alt_hnp_support = 1;
+				break;
+			case USB_DEVICE_U1_ENABLE:
+				if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+				    HCD_USB3)
+					w_value = USB_DEV_STAT_U1_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
+			case USB_DEVICE_U2_ENABLE:
+				if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+				    HCD_USB3)
+					w_value = USB_DEV_STAT_U2_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
+			case USB_DEVICE_LTM_ENABLE:
+				if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+				    HCD_USB3)
+					w_value = USB_DEV_STAT_LTM_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
+			default:
+				ret_val = -EOPNOTSUPP;
+			}
+			if (ret_val == 0) {
+				dum->devstatus |= (1 << w_value);
+				*status = 0;
+			}
+		} else if (setup->bRequestType == Ep_Request) {
+			/* endpoint halt */
+			ep2 = find_endpoint(dum, w_index);
+			if (!ep2 || ep2->ep.name == ep0name) {
+				ret_val = -EOPNOTSUPP;
+				break;
+			}
+			ep2->halted = 1;
+			ret_val = 0;
+			*status = 0;
+		}
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+		if (setup->bRequestType == Dev_Request) {
+			ret_val = 0;
+			switch (w_value) {
+			case USB_DEVICE_REMOTE_WAKEUP:
+				w_value = USB_DEVICE_REMOTE_WAKEUP;
+				break;
+			case USB_DEVICE_U1_ENABLE:
+				if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+				    HCD_USB3)
+					w_value = USB_DEV_STAT_U1_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
+			case USB_DEVICE_U2_ENABLE:
+				if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+				    HCD_USB3)
+					w_value = USB_DEV_STAT_U2_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
+			case USB_DEVICE_LTM_ENABLE:
+				if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+				    HCD_USB3)
+					w_value = USB_DEV_STAT_LTM_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
+			default:
+				ret_val = -EOPNOTSUPP;
+				break;
+			}
+			if (ret_val == 0) {
+				dum->devstatus &= ~(1 << w_value);
+				*status = 0;
+			}
+		} else if (setup->bRequestType == Ep_Request) {
+			/* endpoint halt */
+			ep2 = find_endpoint(dum, w_index);
+			if (!ep2) {
+				ret_val = -EOPNOTSUPP;
+				break;
+			}
+			if (!ep2->wedged)
+				ep2->halted = 0;
+			ret_val = 0;
+			*status = 0;
+		}
+		break;
+	case USB_REQ_GET_STATUS:
+		if (setup->bRequestType == Dev_InRequest
+				|| setup->bRequestType == Intf_InRequest
+				|| setup->bRequestType == Ep_InRequest) {
+			char *buf;
+			/*
+			 * device: remote wakeup, selfpowered
+			 * interface: nothing
+			 * endpoint: halt
+			 */
+			buf = (char *)urb->transfer_buffer;
+			if (urb->transfer_buffer_length > 0) {
+				if (setup->bRequestType == Ep_InRequest) {
+					ep2 = find_endpoint(dum, w_index);
+					if (!ep2) {
+						ret_val = -EOPNOTSUPP;
+						break;
+					}
+					buf[0] = ep2->halted;
+				} else if (setup->bRequestType ==
+					   Dev_InRequest) {
+					buf[0] = (u8)dum->devstatus;
+				} else
+					buf[0] = 0;
+			}
+			if (urb->transfer_buffer_length > 1)
+				buf[1] = 0;
+			urb->actual_length = min_t(u32, 2,
+				urb->transfer_buffer_length);
+			ret_val = 0;
+			*status = 0;
+		}
+		break;
+	}
+	return ret_val;
+}
+
+/*
+ * Drive both sides of the transfers; looks like irq handlers to both
+ * drivers except that the callbacks are invoked from soft interrupt
+ * context.
+ */
+static void dummy_timer(struct timer_list *t)
+{
+	struct dummy_hcd	*dum_hcd = from_timer(dum_hcd, t, timer);
+	struct dummy		*dum = dum_hcd->dum;
+	struct urbp		*urbp, *tmp;
+	unsigned long		flags;
+	int			limit, total;
+	int			i;
+
+	/* simplistic model for one frame's bandwidth */
+	/* FIXME: account for transaction and packet overhead */
+	switch (dum->gadget.speed) {
+	case USB_SPEED_LOW:
+		total = 8/*bytes*/ * 12/*packets*/;
+		break;
+	case USB_SPEED_FULL:
+		total = 64/*bytes*/ * 19/*packets*/;
+		break;
+	case USB_SPEED_HIGH:
+		total = 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/;
+		break;
+	case USB_SPEED_SUPER:
+		/* Bus speed is 500000 bytes/ms, so use a little less */
+		total = 490000;
+		break;
+	default:	/* Can't happen */
+		dev_err(dummy_dev(dum_hcd), "bogus device speed\n");
+		total = 0;
+		break;
+	}
+
+	/* FIXME if HZ != 1000 this will probably misbehave ... */
+
+	/* look at each urb queued by the host side driver */
+	spin_lock_irqsave(&dum->lock, flags);
+
+	if (!dum_hcd->udev) {
+		dev_err(dummy_dev(dum_hcd),
+				"timer fired with no URBs pending?\n");
+		spin_unlock_irqrestore(&dum->lock, flags);
+		return;
+	}
+	dum_hcd->next_frame_urbp = NULL;
+
+	for (i = 0; i < DUMMY_ENDPOINTS; i++) {
+		if (!ep_info[i].name)
+			break;
+		dum->ep[i].already_seen = 0;
+	}
+
+restart:
+	list_for_each_entry_safe(urbp, tmp, &dum_hcd->urbp_list, urbp_list) {
+		struct urb		*urb;
+		struct dummy_request	*req;
+		u8			address;
+		struct dummy_ep		*ep = NULL;
+		int			status = -EINPROGRESS;
+
+		/* stop when we reach URBs queued after the timer interrupt */
+		if (urbp == dum_hcd->next_frame_urbp)
+			break;
+
+		urb = urbp->urb;
+		if (urb->unlinked)
+			goto return_urb;
+		else if (dum_hcd->rh_state != DUMMY_RH_RUNNING)
+			continue;
+
+		/* Used up this frame's bandwidth? */
+		if (total <= 0)
+			continue;
+
+		/* find the gadget's ep for this request (if configured) */
+		address = usb_pipeendpoint (urb->pipe);
+		if (usb_urb_dir_in(urb))
+			address |= USB_DIR_IN;
+		ep = find_endpoint(dum, address);
+		if (!ep) {
+			/* set_configuration() disagreement */
+			dev_dbg(dummy_dev(dum_hcd),
+				"no ep configured for urb %p\n",
+				urb);
+			status = -EPROTO;
+			goto return_urb;
+		}
+
+		if (ep->already_seen)
+			continue;
+		ep->already_seen = 1;
+		if (ep == &dum->ep[0] && urb->error_count) {
+			ep->setup_stage = 1;	/* a new urb */
+			urb->error_count = 0;
+		}
+		if (ep->halted && !ep->setup_stage) {
+			/* NOTE: must not be iso! */
+			dev_dbg(dummy_dev(dum_hcd), "ep %s halted, urb %p\n",
+					ep->ep.name, urb);
+			status = -EPIPE;
+			goto return_urb;
+		}
+		/* FIXME make sure both ends agree on maxpacket */
+
+		/* handle control requests */
+		if (ep == &dum->ep[0] && ep->setup_stage) {
+			struct usb_ctrlrequest		setup;
+			int				value;
+
+			setup = *(struct usb_ctrlrequest *) urb->setup_packet;
+			/* paranoia, in case of stale queued data */
+			list_for_each_entry(req, &ep->queue, queue) {
+				list_del_init(&req->queue);
+				req->req.status = -EOVERFLOW;
+				dev_dbg(udc_dev(dum), "stale req = %p\n",
+						req);
+
+				spin_unlock(&dum->lock);
+				usb_gadget_giveback_request(&ep->ep, &req->req);
+				spin_lock(&dum->lock);
+				ep->already_seen = 0;
+				goto restart;
+			}
+
+			/* gadget driver never sees set_address or operations
+			 * on standard feature flags.  some hardware doesn't
+			 * even expose them.
+			 */
+			ep->last_io = jiffies;
+			ep->setup_stage = 0;
+			ep->halted = 0;
+
+			value = handle_control_request(dum_hcd, urb, &setup,
+						       &status);
+
+			/* gadget driver handles all other requests.  block
+			 * until setup() returns; no reentrancy issues etc.
+			 */
+			if (value > 0) {
+				++dum->callback_usage;
+				spin_unlock(&dum->lock);
+				value = dum->driver->setup(&dum->gadget,
+						&setup);
+				spin_lock(&dum->lock);
+				--dum->callback_usage;
+
+				if (value >= 0) {
+					/* no delays (max 64KB data stage) */
+					limit = 64*1024;
+					goto treat_control_like_bulk;
+				}
+				/* error, see below */
+			}
+
+			if (value < 0) {
+				if (value != -EOPNOTSUPP)
+					dev_dbg(udc_dev(dum),
+						"setup --> %d\n",
+						value);
+				status = -EPIPE;
+				urb->actual_length = 0;
+			}
+
+			goto return_urb;
+		}
+
+		/* non-control requests */
+		limit = total;
+		switch (usb_pipetype(urb->pipe)) {
+		case PIPE_ISOCHRONOUS:
+			/*
+			 * We don't support isochronous.  But if we did,
+			 * here are some of the issues we'd have to face:
+			 *
+			 * Is it urb->interval since the last xfer?
+			 * Use urb->iso_frame_desc[i].
+			 * Complete whether or not ep has requests queued.
+			 * Report random errors, to debug drivers.
+			 */
+			limit = max(limit, periodic_bytes(dum, ep));
+			status = -EINVAL;	/* fail all xfers */
+			break;
+
+		case PIPE_INTERRUPT:
+			/* FIXME is it urb->interval since the last xfer?
+			 * this almost certainly polls too fast.
+			 */
+			limit = max(limit, periodic_bytes(dum, ep));
+			fallthrough;
+
+		default:
+treat_control_like_bulk:
+			ep->last_io = jiffies;
+			total -= transfer(dum_hcd, urb, ep, limit, &status);
+			break;
+		}
+
+		/* incomplete transfer? */
+		if (status == -EINPROGRESS)
+			continue;
+
+return_urb:
+		list_del(&urbp->urbp_list);
+		kfree(urbp);
+		if (ep)
+			ep->already_seen = ep->setup_stage = 0;
+
+		usb_hcd_unlink_urb_from_ep(dummy_hcd_to_hcd(dum_hcd), urb);
+		spin_unlock(&dum->lock);
+		usb_hcd_giveback_urb(dummy_hcd_to_hcd(dum_hcd), urb, status);
+		spin_lock(&dum->lock);
+
+		goto restart;
+	}
+
+	if (list_empty(&dum_hcd->urbp_list)) {
+		usb_put_dev(dum_hcd->udev);
+		dum_hcd->udev = NULL;
+	} else if (dum_hcd->rh_state == DUMMY_RH_RUNNING) {
+		/* want a 1 msec delay here */
+		mod_timer(&dum_hcd->timer, jiffies + msecs_to_jiffies(1));
+	}
+
+	spin_unlock_irqrestore(&dum->lock, flags);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define PORT_C_MASK \
+	((USB_PORT_STAT_C_CONNECTION \
+	| USB_PORT_STAT_C_ENABLE \
+	| USB_PORT_STAT_C_SUSPEND \
+	| USB_PORT_STAT_C_OVERCURRENT \
+	| USB_PORT_STAT_C_RESET) << 16)
+
+static int dummy_hub_status(struct usb_hcd *hcd, char *buf)
+{
+	struct dummy_hcd	*dum_hcd;
+	unsigned long		flags;
+	int			retval = 0;
+
+	dum_hcd = hcd_to_dummy_hcd(hcd);
+
+	spin_lock_irqsave(&dum_hcd->dum->lock, flags);
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		goto done;
+
+	if (dum_hcd->resuming && time_after_eq(jiffies, dum_hcd->re_timeout)) {
+		dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16);
+		dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
+		set_link_state(dum_hcd);
+	}
+
+	if ((dum_hcd->port_status & PORT_C_MASK) != 0) {
+		*buf = (1 << 1);
+		dev_dbg(dummy_dev(dum_hcd), "port status 0x%08x has changes\n",
+				dum_hcd->port_status);
+		retval = 1;
+		if (dum_hcd->rh_state == DUMMY_RH_SUSPENDED)
+			usb_hcd_resume_root_hub(hcd);
+	}
+done:
+	spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
+	return retval;
+}
+
+/* usb 3.0 root hub device descriptor */
+static struct {
+	struct usb_bos_descriptor bos;
+	struct usb_ss_cap_descriptor ss_cap;
+} __packed usb3_bos_desc = {
+
+	.bos = {
+		.bLength		= USB_DT_BOS_SIZE,
+		.bDescriptorType	= USB_DT_BOS,
+		.wTotalLength		= cpu_to_le16(sizeof(usb3_bos_desc)),
+		.bNumDeviceCaps		= 1,
+	},
+	.ss_cap = {
+		.bLength		= USB_DT_USB_SS_CAP_SIZE,
+		.bDescriptorType	= USB_DT_DEVICE_CAPABILITY,
+		.bDevCapabilityType	= USB_SS_CAP_TYPE,
+		.wSpeedSupported	= cpu_to_le16(USB_5GBPS_OPERATION),
+		.bFunctionalitySupport	= ilog2(USB_5GBPS_OPERATION),
+	},
+};
+
+static inline void
+ss_hub_descriptor(struct usb_hub_descriptor *desc)
+{
+	memset(desc, 0, sizeof *desc);
+	desc->bDescriptorType = USB_DT_SS_HUB;
+	desc->bDescLength = 12;
+	desc->wHubCharacteristics = cpu_to_le16(
+			HUB_CHAR_INDV_PORT_LPSM |
+			HUB_CHAR_COMMON_OCPM);
+	desc->bNbrPorts = 1;
+	desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/
+	desc->u.ss.DeviceRemovable = 0;
+}
+
+static inline void hub_descriptor(struct usb_hub_descriptor *desc)
+{
+	memset(desc, 0, sizeof *desc);
+	desc->bDescriptorType = USB_DT_HUB;
+	desc->bDescLength = 9;
+	desc->wHubCharacteristics = cpu_to_le16(
+			HUB_CHAR_INDV_PORT_LPSM |
+			HUB_CHAR_COMMON_OCPM);
+	desc->bNbrPorts = 1;
+	desc->u.hs.DeviceRemovable[0] = 0;
+	desc->u.hs.DeviceRemovable[1] = 0xff;	/* PortPwrCtrlMask */
+}
+
+static int dummy_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength
+) {
+	struct dummy_hcd *dum_hcd;
+	int		retval = 0;
+	unsigned long	flags;
+
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		return -ETIMEDOUT;
+
+	dum_hcd = hcd_to_dummy_hcd(hcd);
+
+	spin_lock_irqsave(&dum_hcd->dum->lock, flags);
+	switch (typeReq) {
+	case ClearHubFeature:
+		break;
+	case ClearPortFeature:
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			if (hcd->speed == HCD_USB3) {
+				dev_dbg(dummy_dev(dum_hcd),
+					 "USB_PORT_FEAT_SUSPEND req not "
+					 "supported for USB 3.0 roothub\n");
+				goto error;
+			}
+			if (dum_hcd->port_status & USB_PORT_STAT_SUSPEND) {
+				/* 20msec resume signaling */
+				dum_hcd->resuming = 1;
+				dum_hcd->re_timeout = jiffies +
+						msecs_to_jiffies(20);
+			}
+			break;
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(dummy_dev(dum_hcd), "power-off\n");
+			if (hcd->speed == HCD_USB3)
+				dum_hcd->port_status &= ~USB_SS_PORT_STAT_POWER;
+			else
+				dum_hcd->port_status &= ~USB_PORT_STAT_POWER;
+			set_link_state(dum_hcd);
+			break;
+		case USB_PORT_FEAT_ENABLE:
+		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_SUSPEND:
+			/* Not allowed for USB-3 */
+			if (hcd->speed == HCD_USB3)
+				goto error;
+			fallthrough;
+		case USB_PORT_FEAT_C_CONNECTION:
+		case USB_PORT_FEAT_C_RESET:
+			dum_hcd->port_status &= ~(1 << wValue);
+			set_link_state(dum_hcd);
+			break;
+		default:
+		/* Disallow INDICATOR and C_OVER_CURRENT */
+			goto error;
+		}
+		break;
+	case GetHubDescriptor:
+		if (hcd->speed == HCD_USB3 &&
+				(wLength < USB_DT_SS_HUB_SIZE ||
+				 wValue != (USB_DT_SS_HUB << 8))) {
+			dev_dbg(dummy_dev(dum_hcd),
+				"Wrong hub descriptor type for "
+				"USB 3.0 roothub.\n");
+			goto error;
+		}
+		if (hcd->speed == HCD_USB3)
+			ss_hub_descriptor((struct usb_hub_descriptor *) buf);
+		else
+			hub_descriptor((struct usb_hub_descriptor *) buf);
+		break;
+
+	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+		if (hcd->speed != HCD_USB3)
+			goto error;
+
+		if ((wValue >> 8) != USB_DT_BOS)
+			goto error;
+
+		memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc));
+		retval = sizeof(usb3_bos_desc);
+		break;
+
+	case GetHubStatus:
+		*(__le32 *) buf = cpu_to_le32(0);
+		break;
+	case GetPortStatus:
+		if (wIndex != 1)
+			retval = -EPIPE;
+
+		/* whoever resets or resumes must GetPortStatus to
+		 * complete it!!
+		 */
+		if (dum_hcd->resuming &&
+				time_after_eq(jiffies, dum_hcd->re_timeout)) {
+			dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16);
+			dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
+		}
+		if ((dum_hcd->port_status & USB_PORT_STAT_RESET) != 0 &&
+				time_after_eq(jiffies, dum_hcd->re_timeout)) {
+			dum_hcd->port_status |= (USB_PORT_STAT_C_RESET << 16);
+			dum_hcd->port_status &= ~USB_PORT_STAT_RESET;
+			if (dum_hcd->dum->pullup) {
+				dum_hcd->port_status |= USB_PORT_STAT_ENABLE;
+
+				if (hcd->speed < HCD_USB3) {
+					switch (dum_hcd->dum->gadget.speed) {
+					case USB_SPEED_HIGH:
+						dum_hcd->port_status |=
+						      USB_PORT_STAT_HIGH_SPEED;
+						break;
+					case USB_SPEED_LOW:
+						dum_hcd->dum->gadget.ep0->
+							maxpacket = 8;
+						dum_hcd->port_status |=
+							USB_PORT_STAT_LOW_SPEED;
+						break;
+					default:
+						break;
+					}
+				}
+			}
+		}
+		set_link_state(dum_hcd);
+		((__le16 *) buf)[0] = cpu_to_le16(dum_hcd->port_status);
+		((__le16 *) buf)[1] = cpu_to_le16(dum_hcd->port_status >> 16);
+		break;
+	case SetHubFeature:
+		retval = -EPIPE;
+		break;
+	case SetPortFeature:
+		switch (wValue) {
+		case USB_PORT_FEAT_LINK_STATE:
+			if (hcd->speed != HCD_USB3) {
+				dev_dbg(dummy_dev(dum_hcd),
+					 "USB_PORT_FEAT_LINK_STATE req not "
+					 "supported for USB 2.0 roothub\n");
+				goto error;
+			}
+			/*
+			 * Since this is dummy we don't have an actual link so
+			 * there is nothing to do for the SET_LINK_STATE cmd
+			 */
+			break;
+		case USB_PORT_FEAT_U1_TIMEOUT:
+		case USB_PORT_FEAT_U2_TIMEOUT:
+			/* TODO: add suspend/resume support! */
+			if (hcd->speed != HCD_USB3) {
+				dev_dbg(dummy_dev(dum_hcd),
+					 "USB_PORT_FEAT_U1/2_TIMEOUT req not "
+					 "supported for USB 2.0 roothub\n");
+				goto error;
+			}
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			/* Applicable only for USB2.0 hub */
+			if (hcd->speed == HCD_USB3) {
+				dev_dbg(dummy_dev(dum_hcd),
+					 "USB_PORT_FEAT_SUSPEND req not "
+					 "supported for USB 3.0 roothub\n");
+				goto error;
+			}
+			if (dum_hcd->active) {
+				dum_hcd->port_status |= USB_PORT_STAT_SUSPEND;
+
+				/* HNP would happen here; for now we
+				 * assume b_bus_req is always true.
+				 */
+				set_link_state(dum_hcd);
+				if (((1 << USB_DEVICE_B_HNP_ENABLE)
+						& dum_hcd->dum->devstatus) != 0)
+					dev_dbg(dummy_dev(dum_hcd),
+							"no HNP yet!\n");
+			}
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (hcd->speed == HCD_USB3)
+				dum_hcd->port_status |= USB_SS_PORT_STAT_POWER;
+			else
+				dum_hcd->port_status |= USB_PORT_STAT_POWER;
+			set_link_state(dum_hcd);
+			break;
+		case USB_PORT_FEAT_BH_PORT_RESET:
+			/* Applicable only for USB3.0 hub */
+			if (hcd->speed != HCD_USB3) {
+				dev_dbg(dummy_dev(dum_hcd),
+					 "USB_PORT_FEAT_BH_PORT_RESET req not "
+					 "supported for USB 2.0 roothub\n");
+				goto error;
+			}
+			fallthrough;
+		case USB_PORT_FEAT_RESET:
+			if (!(dum_hcd->port_status & USB_PORT_STAT_CONNECTION))
+				break;
+			/* if it's already enabled, disable */
+			if (hcd->speed == HCD_USB3) {
+				dum_hcd->port_status =
+					(USB_SS_PORT_STAT_POWER |
+					 USB_PORT_STAT_CONNECTION |
+					 USB_PORT_STAT_RESET);
+			} else {
+				dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE
+					| USB_PORT_STAT_LOW_SPEED
+					| USB_PORT_STAT_HIGH_SPEED);
+				dum_hcd->port_status |= USB_PORT_STAT_RESET;
+			}
+			/*
+			 * We want to reset device status. All but the
+			 * Self powered feature
+			 */
+			dum_hcd->dum->devstatus &=
+				(1 << USB_DEVICE_SELF_POWERED);
+			/*
+			 * FIXME USB3.0: what is the correct reset signaling
+			 * interval? Is it still 50msec as for HS?
+			 */
+			dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
+			set_link_state(dum_hcd);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+		case USB_PORT_FEAT_C_RESET:
+		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_SUSPEND:
+			/* Not allowed for USB-3, and ignored for USB-2 */
+			if (hcd->speed == HCD_USB3)
+				goto error;
+			break;
+		default:
+		/* Disallow TEST, INDICATOR, and C_OVER_CURRENT */
+			goto error;
+		}
+		break;
+	case GetPortErrorCount:
+		if (hcd->speed != HCD_USB3) {
+			dev_dbg(dummy_dev(dum_hcd),
+				 "GetPortErrorCount req not "
+				 "supported for USB 2.0 roothub\n");
+			goto error;
+		}
+		/* We'll always return 0 since this is a dummy hub */
+		*(__le32 *) buf = cpu_to_le32(0);
+		break;
+	case SetHubDepth:
+		if (hcd->speed != HCD_USB3) {
+			dev_dbg(dummy_dev(dum_hcd),
+				 "SetHubDepth req not supported for "
+				 "USB 2.0 roothub\n");
+			goto error;
+		}
+		break;
+	default:
+		dev_dbg(dummy_dev(dum_hcd),
+			"hub control req%04x v%04x i%04x l%d\n",
+			typeReq, wValue, wIndex, wLength);
+error:
+		/* "protocol stall" on error */
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
+
+	if ((dum_hcd->port_status & PORT_C_MASK) != 0)
+		usb_hcd_poll_rh_status(hcd);
+	return retval;
+}
+
+static int dummy_bus_suspend(struct usb_hcd *hcd)
+{
+	struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
+
+	dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
+
+	spin_lock_irq(&dum_hcd->dum->lock);
+	dum_hcd->rh_state = DUMMY_RH_SUSPENDED;
+	set_link_state(dum_hcd);
+	hcd->state = HC_STATE_SUSPENDED;
+	spin_unlock_irq(&dum_hcd->dum->lock);
+	return 0;
+}
+
+static int dummy_bus_resume(struct usb_hcd *hcd)
+{
+	struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
+	int rc = 0;
+
+	dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
+
+	spin_lock_irq(&dum_hcd->dum->lock);
+	if (!HCD_HW_ACCESSIBLE(hcd)) {
+		rc = -ESHUTDOWN;
+	} else {
+		dum_hcd->rh_state = DUMMY_RH_RUNNING;
+		set_link_state(dum_hcd);
+		if (!list_empty(&dum_hcd->urbp_list))
+			mod_timer(&dum_hcd->timer, jiffies);
+		hcd->state = HC_STATE_RUNNING;
+	}
+	spin_unlock_irq(&dum_hcd->dum->lock);
+	return rc;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline ssize_t show_urb(char *buf, size_t size, struct urb *urb)
+{
+	int ep = usb_pipeendpoint(urb->pipe);
+
+	return scnprintf(buf, size,
+		"urb/%p %s ep%d%s%s len %d/%d\n",
+		urb,
+		({ char *s;
+		switch (urb->dev->speed) {
+		case USB_SPEED_LOW:
+			s = "ls";
+			break;
+		case USB_SPEED_FULL:
+			s = "fs";
+			break;
+		case USB_SPEED_HIGH:
+			s = "hs";
+			break;
+		case USB_SPEED_SUPER:
+			s = "ss";
+			break;
+		default:
+			s = "?";
+			break;
+		 } s; }),
+		ep, ep ? (usb_urb_dir_in(urb) ? "in" : "out") : "",
+		({ char *s; \
+		switch (usb_pipetype(urb->pipe)) { \
+		case PIPE_CONTROL: \
+			s = ""; \
+			break; \
+		case PIPE_BULK: \
+			s = "-bulk"; \
+			break; \
+		case PIPE_INTERRUPT: \
+			s = "-int"; \
+			break; \
+		default: \
+			s = "-iso"; \
+			break; \
+		} s; }),
+		urb->actual_length, urb->transfer_buffer_length);
+}
+
+static ssize_t urbs_show(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct usb_hcd		*hcd = dev_get_drvdata(dev);
+	struct dummy_hcd	*dum_hcd = hcd_to_dummy_hcd(hcd);
+	struct urbp		*urbp;
+	size_t			size = 0;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dum_hcd->dum->lock, flags);
+	list_for_each_entry(urbp, &dum_hcd->urbp_list, urbp_list) {
+		size_t		temp;
+
+		temp = show_urb(buf, PAGE_SIZE - size, urbp->urb);
+		buf += temp;
+		size += temp;
+	}
+	spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
+
+	return size;
+}
+static DEVICE_ATTR_RO(urbs);
+
+static int dummy_start_ss(struct dummy_hcd *dum_hcd)
+{
+	timer_setup(&dum_hcd->timer, dummy_timer, 0);
+	dum_hcd->rh_state = DUMMY_RH_RUNNING;
+	dum_hcd->stream_en_ep = 0;
+	INIT_LIST_HEAD(&dum_hcd->urbp_list);
+	dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3;
+	dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING;
+	dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1;
+#ifdef CONFIG_USB_OTG
+	dummy_hcd_to_hcd(dum_hcd)->self.otg_port = 1;
+#endif
+	return 0;
+
+	/* FIXME 'urbs' should be a per-device thing, maybe in usbcore */
+	return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs);
+}
+
+static int dummy_start(struct usb_hcd *hcd)
+{
+	struct dummy_hcd	*dum_hcd = hcd_to_dummy_hcd(hcd);
+
+	/*
+	 * HOST side init ... we emulate a root hub that'll only ever
+	 * talk to one device (the gadget side).  Also appears in sysfs,
+	 * just like more familiar pci-based HCDs.
+	 */
+	if (!usb_hcd_is_primary_hcd(hcd))
+		return dummy_start_ss(dum_hcd);
+
+	spin_lock_init(&dum_hcd->dum->lock);
+	timer_setup(&dum_hcd->timer, dummy_timer, 0);
+	dum_hcd->rh_state = DUMMY_RH_RUNNING;
+
+	INIT_LIST_HEAD(&dum_hcd->urbp_list);
+
+	hcd->power_budget = POWER_BUDGET;
+	hcd->state = HC_STATE_RUNNING;
+	hcd->uses_new_polling = 1;
+
+#ifdef CONFIG_USB_OTG
+	hcd->self.otg_port = 1;
+#endif
+
+	/* FIXME 'urbs' should be a per-device thing, maybe in usbcore */
+	return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs);
+}
+
+static void dummy_stop(struct usb_hcd *hcd)
+{
+	device_remove_file(dummy_dev(hcd_to_dummy_hcd(hcd)), &dev_attr_urbs);
+	dev_info(dummy_dev(hcd_to_dummy_hcd(hcd)), "stopped\n");
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int dummy_h_get_frame(struct usb_hcd *hcd)
+{
+	return dummy_g_get_frame(NULL);
+}
+
+static int dummy_setup(struct usb_hcd *hcd)
+{
+	struct dummy *dum;
+
+	dum = *((void **)dev_get_platdata(hcd->self.controller));
+	hcd->self.sg_tablesize = ~0;
+	if (usb_hcd_is_primary_hcd(hcd)) {
+		dum->hs_hcd = hcd_to_dummy_hcd(hcd);
+		dum->hs_hcd->dum = dum;
+		/*
+		 * Mark the first roothub as being USB 2.0.
+		 * The USB 3.0 roothub will be registered later by
+		 * dummy_hcd_probe()
+		 */
+		hcd->speed = HCD_USB2;
+		hcd->self.root_hub->speed = USB_SPEED_HIGH;
+	} else {
+		dum->ss_hcd = hcd_to_dummy_hcd(hcd);
+		dum->ss_hcd->dum = dum;
+		hcd->speed = HCD_USB3;
+		hcd->self.root_hub->speed = USB_SPEED_SUPER;
+	}
+	return 0;
+}
+
+/* Change a group of bulk endpoints to support multiple stream IDs */
+static int dummy_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
+	struct usb_host_endpoint **eps, unsigned int num_eps,
+	unsigned int num_streams, gfp_t mem_flags)
+{
+	struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
+	unsigned long flags;
+	int max_stream;
+	int ret_streams = num_streams;
+	unsigned int index;
+	unsigned int i;
+
+	if (!num_eps)
+		return -EINVAL;
+
+	spin_lock_irqsave(&dum_hcd->dum->lock, flags);
+	for (i = 0; i < num_eps; i++) {
+		index = dummy_get_ep_idx(&eps[i]->desc);
+		if ((1 << index) & dum_hcd->stream_en_ep) {
+			ret_streams = -EINVAL;
+			goto out;
+		}
+		max_stream = usb_ss_max_streams(&eps[i]->ss_ep_comp);
+		if (!max_stream) {
+			ret_streams = -EINVAL;
+			goto out;
+		}
+		if (max_stream < ret_streams) {
+			dev_dbg(dummy_dev(dum_hcd), "Ep 0x%x only supports %u "
+					"stream IDs.\n",
+					eps[i]->desc.bEndpointAddress,
+					max_stream);
+			ret_streams = max_stream;
+		}
+	}
+
+	for (i = 0; i < num_eps; i++) {
+		index = dummy_get_ep_idx(&eps[i]->desc);
+		dum_hcd->stream_en_ep |= 1 << index;
+		set_max_streams_for_pipe(dum_hcd,
+				usb_endpoint_num(&eps[i]->desc), ret_streams);
+	}
+out:
+	spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
+	return ret_streams;
+}
+
+/* Reverts a group of bulk endpoints back to not using stream IDs. */
+static int dummy_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
+	struct usb_host_endpoint **eps, unsigned int num_eps,
+	gfp_t mem_flags)
+{
+	struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
+	unsigned long flags;
+	int ret;
+	unsigned int index;
+	unsigned int i;
+
+	spin_lock_irqsave(&dum_hcd->dum->lock, flags);
+	for (i = 0; i < num_eps; i++) {
+		index = dummy_get_ep_idx(&eps[i]->desc);
+		if (!((1 << index) & dum_hcd->stream_en_ep)) {
+			ret = -EINVAL;
+			goto out;
+		}
+	}
+
+	for (i = 0; i < num_eps; i++) {
+		index = dummy_get_ep_idx(&eps[i]->desc);
+		dum_hcd->stream_en_ep &= ~(1 << index);
+		set_max_streams_for_pipe(dum_hcd,
+				usb_endpoint_num(&eps[i]->desc), 0);
+	}
+	ret = 0;
+out:
+	spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
+	return ret;
+}
+
+static struct hc_driver dummy_hcd = {
+	.description =		(char *) driver_name,
+	.product_desc =		"Dummy host controller",
+	.hcd_priv_size =	sizeof(struct dummy_hcd),
+
+	.reset =		dummy_setup,
+	.start =		dummy_start,
+	.stop =			dummy_stop,
+
+	.urb_enqueue =		dummy_urb_enqueue,
+	.urb_dequeue =		dummy_urb_dequeue,
+
+	.get_frame_number =	dummy_h_get_frame,
+
+	.hub_status_data =	dummy_hub_status,
+	.hub_control =		dummy_hub_control,
+	.bus_suspend =		dummy_bus_suspend,
+	.bus_resume =		dummy_bus_resume,
+
+	.alloc_streams =	dummy_alloc_streams,
+	.free_streams =		dummy_free_streams,
+};
+
+static int dummy_hcd_probe(struct platform_device *pdev)
+{
+	struct dummy		*dum;
+	struct usb_hcd		*hs_hcd;
+	struct usb_hcd		*ss_hcd;
+	int			retval;
+
+	dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc);
+	dum = *((void **)dev_get_platdata(&pdev->dev));
+
+	if (mod_data.is_super_speed)
+		dummy_hcd.flags = HCD_USB3 | HCD_SHARED;
+	else if (mod_data.is_high_speed)
+		dummy_hcd.flags = HCD_USB2;
+	else
+		dummy_hcd.flags = HCD_USB11;
+	hs_hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, dev_name(&pdev->dev));
+	if (!hs_hcd)
+		return -ENOMEM;
+	hs_hcd->has_tt = 1;
+
+	retval = usb_add_hcd(hs_hcd, 0, 0);
+	if (retval)
+		goto put_usb2_hcd;
+
+	if (mod_data.is_super_speed) {
+		ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev,
+					dev_name(&pdev->dev), hs_hcd);
+		if (!ss_hcd) {
+			retval = -ENOMEM;
+			goto dealloc_usb2_hcd;
+		}
+
+		retval = usb_add_hcd(ss_hcd, 0, 0);
+		if (retval)
+			goto put_usb3_hcd;
+	}
+	return 0;
+
+put_usb3_hcd:
+	usb_put_hcd(ss_hcd);
+dealloc_usb2_hcd:
+	usb_remove_hcd(hs_hcd);
+put_usb2_hcd:
+	usb_put_hcd(hs_hcd);
+	dum->hs_hcd = dum->ss_hcd = NULL;
+	return retval;
+}
+
+static int dummy_hcd_remove(struct platform_device *pdev)
+{
+	struct dummy		*dum;
+
+	dum = hcd_to_dummy_hcd(platform_get_drvdata(pdev))->dum;
+
+	if (dum->ss_hcd) {
+		usb_remove_hcd(dummy_hcd_to_hcd(dum->ss_hcd));
+		usb_put_hcd(dummy_hcd_to_hcd(dum->ss_hcd));
+	}
+
+	usb_remove_hcd(dummy_hcd_to_hcd(dum->hs_hcd));
+	usb_put_hcd(dummy_hcd_to_hcd(dum->hs_hcd));
+
+	dum->hs_hcd = NULL;
+	dum->ss_hcd = NULL;
+
+	return 0;
+}
+
+static int dummy_hcd_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct usb_hcd		*hcd;
+	struct dummy_hcd	*dum_hcd;
+	int			rc = 0;
+
+	dev_dbg(&pdev->dev, "%s\n", __func__);
+
+	hcd = platform_get_drvdata(pdev);
+	dum_hcd = hcd_to_dummy_hcd(hcd);
+	if (dum_hcd->rh_state == DUMMY_RH_RUNNING) {
+		dev_warn(&pdev->dev, "Root hub isn't suspended!\n");
+		rc = -EBUSY;
+	} else
+		clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	return rc;
+}
+
+static int dummy_hcd_resume(struct platform_device *pdev)
+{
+	struct usb_hcd		*hcd;
+
+	dev_dbg(&pdev->dev, "%s\n", __func__);
+
+	hcd = platform_get_drvdata(pdev);
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	usb_hcd_poll_rh_status(hcd);
+	return 0;
+}
+
+static struct platform_driver dummy_hcd_driver = {
+	.probe		= dummy_hcd_probe,
+	.remove		= dummy_hcd_remove,
+	.suspend	= dummy_hcd_suspend,
+	.resume		= dummy_hcd_resume,
+	.driver		= {
+		.name	= driver_name,
+	},
+};
+
+/*-------------------------------------------------------------------------*/
+#define MAX_NUM_UDC	32
+static struct platform_device *the_udc_pdev[MAX_NUM_UDC];
+static struct platform_device *the_hcd_pdev[MAX_NUM_UDC];
+
+static int __init dummy_hcd_init(void)
+{
+	int	retval = -ENOMEM;
+	int	i;
+	struct	dummy *dum[MAX_NUM_UDC] = {};
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	if (!mod_data.is_high_speed && mod_data.is_super_speed)
+		return -EINVAL;
+
+	if (mod_data.num < 1 || mod_data.num > MAX_NUM_UDC) {
+		pr_err("Number of emulated UDC must be in range of 1...%d\n",
+				MAX_NUM_UDC);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < mod_data.num; i++) {
+		the_hcd_pdev[i] = platform_device_alloc(driver_name, i);
+		if (!the_hcd_pdev[i]) {
+			i--;
+			while (i >= 0)
+				platform_device_put(the_hcd_pdev[i--]);
+			return retval;
+		}
+	}
+	for (i = 0; i < mod_data.num; i++) {
+		the_udc_pdev[i] = platform_device_alloc(gadget_name, i);
+		if (!the_udc_pdev[i]) {
+			i--;
+			while (i >= 0)
+				platform_device_put(the_udc_pdev[i--]);
+			goto err_alloc_udc;
+		}
+	}
+	for (i = 0; i < mod_data.num; i++) {
+		dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL);
+		if (!dum[i]) {
+			retval = -ENOMEM;
+			goto err_add_pdata;
+		}
+		retval = platform_device_add_data(the_hcd_pdev[i], &dum[i],
+				sizeof(void *));
+		if (retval)
+			goto err_add_pdata;
+		retval = platform_device_add_data(the_udc_pdev[i], &dum[i],
+				sizeof(void *));
+		if (retval)
+			goto err_add_pdata;
+	}
+
+	retval = platform_driver_register(&dummy_hcd_driver);
+	if (retval < 0)
+		goto err_add_pdata;
+	retval = platform_driver_register(&dummy_udc_driver);
+	if (retval < 0)
+		goto err_register_udc_driver;
+
+	for (i = 0; i < mod_data.num; i++) {
+		retval = platform_device_add(the_hcd_pdev[i]);
+		if (retval < 0) {
+			i--;
+			while (i >= 0)
+				platform_device_del(the_hcd_pdev[i--]);
+			goto err_add_hcd;
+		}
+	}
+	for (i = 0; i < mod_data.num; i++) {
+		if (!dum[i]->hs_hcd ||
+				(!dum[i]->ss_hcd && mod_data.is_super_speed)) {
+			/*
+			 * The hcd was added successfully but its probe
+			 * function failed for some reason.
+			 */
+			retval = -EINVAL;
+			goto err_add_udc;
+		}
+	}
+
+	for (i = 0; i < mod_data.num; i++) {
+		retval = platform_device_add(the_udc_pdev[i]);
+		if (retval < 0) {
+			i--;
+			while (i >= 0)
+				platform_device_del(the_udc_pdev[i--]);
+			goto err_add_udc;
+		}
+	}
+
+	for (i = 0; i < mod_data.num; i++) {
+		if (!platform_get_drvdata(the_udc_pdev[i])) {
+			/*
+			 * The udc was added successfully but its probe
+			 * function failed for some reason.
+			 */
+			retval = -EINVAL;
+			goto err_probe_udc;
+		}
+	}
+	return retval;
+
+err_probe_udc:
+	for (i = 0; i < mod_data.num; i++)
+		platform_device_del(the_udc_pdev[i]);
+err_add_udc:
+	for (i = 0; i < mod_data.num; i++)
+		platform_device_del(the_hcd_pdev[i]);
+err_add_hcd:
+	platform_driver_unregister(&dummy_udc_driver);
+err_register_udc_driver:
+	platform_driver_unregister(&dummy_hcd_driver);
+err_add_pdata:
+	for (i = 0; i < mod_data.num; i++)
+		kfree(dum[i]);
+	for (i = 0; i < mod_data.num; i++)
+		platform_device_put(the_udc_pdev[i]);
+err_alloc_udc:
+	for (i = 0; i < mod_data.num; i++)
+		platform_device_put(the_hcd_pdev[i]);
+	return retval;
+}
+module_init(dummy_hcd_init);
+
+static void __exit dummy_hcd_cleanup(void)
+{
+	int i;
+
+	for (i = 0; i < mod_data.num; i++) {
+		struct dummy *dum;
+
+		dum = *((void **)dev_get_platdata(&the_udc_pdev[i]->dev));
+
+		platform_device_unregister(the_udc_pdev[i]);
+		platform_device_unregister(the_hcd_pdev[i]);
+		kfree(dum);
+	}
+	platform_driver_unregister(&dummy_udc_driver);
+	platform_driver_unregister(&dummy_hcd_driver);
+}
+module_exit(dummy_hcd_cleanup);
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
new file mode 100644
index 000000000..3350b7776
--- /dev/null
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -0,0 +1,1239 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * FOTG210 UDC Driver supports Bulk transfer so far
+ *
+ * Copyright (C) 2013 Faraday Technology Corporation
+ *
+ * Author : Yuan-Hsin Chen <yhchen@faraday-tech.com>
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "fotg210.h"
+
+#define	DRIVER_DESC	"FOTG210 USB Device Controller Driver"
+#define	DRIVER_VERSION	"30-April-2013"
+
+static const char udc_name[] = "fotg210_udc";
+static const char * const fotg210_ep_name[] = {
+	"ep0", "ep1", "ep2", "ep3", "ep4"};
+
+static void fotg210_disable_fifo_int(struct fotg210_ep *ep)
+{
+	u32 value = ioread32(ep->fotg210->reg + FOTG210_DMISGR1);
+
+	if (ep->dir_in)
+		value |= DMISGR1_MF_IN_INT(ep->epnum - 1);
+	else
+		value |= DMISGR1_MF_OUTSPK_INT(ep->epnum - 1);
+	iowrite32(value, ep->fotg210->reg + FOTG210_DMISGR1);
+}
+
+static void fotg210_enable_fifo_int(struct fotg210_ep *ep)
+{
+	u32 value = ioread32(ep->fotg210->reg + FOTG210_DMISGR1);
+
+	if (ep->dir_in)
+		value &= ~DMISGR1_MF_IN_INT(ep->epnum - 1);
+	else
+		value &= ~DMISGR1_MF_OUTSPK_INT(ep->epnum - 1);
+	iowrite32(value, ep->fotg210->reg + FOTG210_DMISGR1);
+}
+
+static void fotg210_set_cxdone(struct fotg210_udc *fotg210)
+{
+	u32 value = ioread32(fotg210->reg + FOTG210_DCFESR);
+
+	value |= DCFESR_CX_DONE;
+	iowrite32(value, fotg210->reg + FOTG210_DCFESR);
+}
+
+static void fotg210_done(struct fotg210_ep *ep, struct fotg210_request *req,
+			int status)
+{
+	list_del_init(&req->queue);
+
+	/* don't modify queue heads during completion callback */
+	if (ep->fotg210->gadget.speed == USB_SPEED_UNKNOWN)
+		req->req.status = -ESHUTDOWN;
+	else
+		req->req.status = status;
+
+	spin_unlock(&ep->fotg210->lock);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&ep->fotg210->lock);
+
+	if (ep->epnum) {
+		if (list_empty(&ep->queue))
+			fotg210_disable_fifo_int(ep);
+	} else {
+		fotg210_set_cxdone(ep->fotg210);
+	}
+}
+
+static void fotg210_fifo_ep_mapping(struct fotg210_ep *ep, u32 epnum,
+				u32 dir_in)
+{
+	struct fotg210_udc *fotg210 = ep->fotg210;
+	u32 val;
+
+	/* Driver should map an ep to a fifo and then map the fifo
+	 * to the ep. What a brain-damaged design!
+	 */
+
+	/* map a fifo to an ep */
+	val = ioread32(fotg210->reg + FOTG210_EPMAP);
+	val &= ~EPMAP_FIFONOMSK(epnum, dir_in);
+	val |= EPMAP_FIFONO(epnum, dir_in);
+	iowrite32(val, fotg210->reg + FOTG210_EPMAP);
+
+	/* map the ep to the fifo */
+	val = ioread32(fotg210->reg + FOTG210_FIFOMAP);
+	val &= ~FIFOMAP_EPNOMSK(epnum);
+	val |= FIFOMAP_EPNO(epnum);
+	iowrite32(val, fotg210->reg + FOTG210_FIFOMAP);
+
+	/* enable fifo */
+	val = ioread32(fotg210->reg + FOTG210_FIFOCF);
+	val |= FIFOCF_FIFO_EN(epnum - 1);
+	iowrite32(val, fotg210->reg + FOTG210_FIFOCF);
+}
+
+static void fotg210_set_fifo_dir(struct fotg210_ep *ep, u32 epnum, u32 dir_in)
+{
+	struct fotg210_udc *fotg210 = ep->fotg210;
+	u32 val;
+
+	val = ioread32(fotg210->reg + FOTG210_FIFOMAP);
+	val |= (dir_in ? FIFOMAP_DIRIN(epnum - 1) : FIFOMAP_DIROUT(epnum - 1));
+	iowrite32(val, fotg210->reg + FOTG210_FIFOMAP);
+}
+
+static void fotg210_set_tfrtype(struct fotg210_ep *ep, u32 epnum, u32 type)
+{
+	struct fotg210_udc *fotg210 = ep->fotg210;
+	u32 val;
+
+	val = ioread32(fotg210->reg + FOTG210_FIFOCF);
+	val |= FIFOCF_TYPE(type, epnum - 1);
+	iowrite32(val, fotg210->reg + FOTG210_FIFOCF);
+}
+
+static void fotg210_set_mps(struct fotg210_ep *ep, u32 epnum, u32 mps,
+				u32 dir_in)
+{
+	struct fotg210_udc *fotg210 = ep->fotg210;
+	u32 val;
+	u32 offset = dir_in ? FOTG210_INEPMPSR(epnum) :
+				FOTG210_OUTEPMPSR(epnum);
+
+	val = ioread32(fotg210->reg + offset);
+	val |= INOUTEPMPSR_MPS(mps);
+	iowrite32(val, fotg210->reg + offset);
+}
+
+static int fotg210_config_ep(struct fotg210_ep *ep,
+		     const struct usb_endpoint_descriptor *desc)
+{
+	struct fotg210_udc *fotg210 = ep->fotg210;
+
+	fotg210_set_fifo_dir(ep, ep->epnum, ep->dir_in);
+	fotg210_set_tfrtype(ep, ep->epnum, ep->type);
+	fotg210_set_mps(ep, ep->epnum, ep->ep.maxpacket, ep->dir_in);
+	fotg210_fifo_ep_mapping(ep, ep->epnum, ep->dir_in);
+
+	fotg210->ep[ep->epnum] = ep;
+
+	return 0;
+}
+
+static int fotg210_ep_enable(struct usb_ep *_ep,
+			  const struct usb_endpoint_descriptor *desc)
+{
+	struct fotg210_ep *ep;
+
+	ep = container_of(_ep, struct fotg210_ep, ep);
+
+	ep->desc = desc;
+	ep->epnum = usb_endpoint_num(desc);
+	ep->type = usb_endpoint_type(desc);
+	ep->dir_in = usb_endpoint_dir_in(desc);
+	ep->ep.maxpacket = usb_endpoint_maxp(desc);
+
+	return fotg210_config_ep(ep, desc);
+}
+
+static void fotg210_reset_tseq(struct fotg210_udc *fotg210, u8 epnum)
+{
+	struct fotg210_ep *ep = fotg210->ep[epnum];
+	u32 value;
+	void __iomem *reg;
+
+	reg = (ep->dir_in) ?
+		fotg210->reg + FOTG210_INEPMPSR(epnum) :
+		fotg210->reg + FOTG210_OUTEPMPSR(epnum);
+
+	/* Note: Driver needs to set and clear INOUTEPMPSR_RESET_TSEQ
+	 *	 bit. Controller wouldn't clear this bit. WTF!!!
+	 */
+
+	value = ioread32(reg);
+	value |= INOUTEPMPSR_RESET_TSEQ;
+	iowrite32(value, reg);
+
+	value = ioread32(reg);
+	value &= ~INOUTEPMPSR_RESET_TSEQ;
+	iowrite32(value, reg);
+}
+
+static int fotg210_ep_release(struct fotg210_ep *ep)
+{
+	if (!ep->epnum)
+		return 0;
+	ep->epnum = 0;
+	ep->stall = 0;
+	ep->wedged = 0;
+
+	fotg210_reset_tseq(ep->fotg210, ep->epnum);
+
+	return 0;
+}
+
+static int fotg210_ep_disable(struct usb_ep *_ep)
+{
+	struct fotg210_ep *ep;
+	struct fotg210_request *req;
+	unsigned long flags;
+
+	BUG_ON(!_ep);
+
+	ep = container_of(_ep, struct fotg210_ep, ep);
+
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next,
+			struct fotg210_request, queue);
+		spin_lock_irqsave(&ep->fotg210->lock, flags);
+		fotg210_done(ep, req, -ECONNRESET);
+		spin_unlock_irqrestore(&ep->fotg210->lock, flags);
+	}
+
+	return fotg210_ep_release(ep);
+}
+
+static struct usb_request *fotg210_ep_alloc_request(struct usb_ep *_ep,
+						gfp_t gfp_flags)
+{
+	struct fotg210_request *req;
+
+	req = kzalloc(sizeof(struct fotg210_request), gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void fotg210_ep_free_request(struct usb_ep *_ep,
+					struct usb_request *_req)
+{
+	struct fotg210_request *req;
+
+	req = container_of(_req, struct fotg210_request, req);
+	kfree(req);
+}
+
+static void fotg210_enable_dma(struct fotg210_ep *ep,
+			      dma_addr_t d, u32 len)
+{
+	u32 value;
+	struct fotg210_udc *fotg210 = ep->fotg210;
+
+	/* set transfer length and direction */
+	value = ioread32(fotg210->reg + FOTG210_DMACPSR1);
+	value &= ~(DMACPSR1_DMA_LEN(0xFFFF) | DMACPSR1_DMA_TYPE(1));
+	value |= DMACPSR1_DMA_LEN(len) | DMACPSR1_DMA_TYPE(ep->dir_in);
+	iowrite32(value, fotg210->reg + FOTG210_DMACPSR1);
+
+	/* set device DMA target FIFO number */
+	value = ioread32(fotg210->reg + FOTG210_DMATFNR);
+	if (ep->epnum)
+		value |= DMATFNR_ACC_FN(ep->epnum - 1);
+	else
+		value |= DMATFNR_ACC_CXF;
+	iowrite32(value, fotg210->reg + FOTG210_DMATFNR);
+
+	/* set DMA memory address */
+	iowrite32(d, fotg210->reg + FOTG210_DMACPSR2);
+
+	/* enable MDMA_EROR and MDMA_CMPLT interrupt */
+	value = ioread32(fotg210->reg + FOTG210_DMISGR2);
+	value &= ~(DMISGR2_MDMA_CMPLT | DMISGR2_MDMA_ERROR);
+	iowrite32(value, fotg210->reg + FOTG210_DMISGR2);
+
+	/* start DMA */
+	value = ioread32(fotg210->reg + FOTG210_DMACPSR1);
+	value |= DMACPSR1_DMA_START;
+	iowrite32(value, fotg210->reg + FOTG210_DMACPSR1);
+}
+
+static void fotg210_disable_dma(struct fotg210_ep *ep)
+{
+	iowrite32(DMATFNR_DISDMA, ep->fotg210->reg + FOTG210_DMATFNR);
+}
+
+static void fotg210_wait_dma_done(struct fotg210_ep *ep)
+{
+	u32 value;
+
+	do {
+		value = ioread32(ep->fotg210->reg + FOTG210_DISGR2);
+		if ((value & DISGR2_USBRST_INT) ||
+		    (value & DISGR2_DMA_ERROR))
+			goto dma_reset;
+	} while (!(value & DISGR2_DMA_CMPLT));
+
+	value &= ~DISGR2_DMA_CMPLT;
+	iowrite32(value, ep->fotg210->reg + FOTG210_DISGR2);
+	return;
+
+dma_reset:
+	value = ioread32(ep->fotg210->reg + FOTG210_DMACPSR1);
+	value |= DMACPSR1_DMA_ABORT;
+	iowrite32(value, ep->fotg210->reg + FOTG210_DMACPSR1);
+
+	/* reset fifo */
+	if (ep->epnum) {
+		value = ioread32(ep->fotg210->reg +
+				FOTG210_FIBCR(ep->epnum - 1));
+		value |= FIBCR_FFRST;
+		iowrite32(value, ep->fotg210->reg +
+				FOTG210_FIBCR(ep->epnum - 1));
+	} else {
+		value = ioread32(ep->fotg210->reg + FOTG210_DCFESR);
+		value |= DCFESR_CX_CLR;
+		iowrite32(value, ep->fotg210->reg + FOTG210_DCFESR);
+	}
+}
+
+static void fotg210_start_dma(struct fotg210_ep *ep,
+			struct fotg210_request *req)
+{
+	struct device *dev = &ep->fotg210->gadget.dev;
+	dma_addr_t d;
+	u8 *buffer;
+	u32 length;
+
+	if (ep->epnum) {
+		if (ep->dir_in) {
+			buffer = req->req.buf;
+			length = req->req.length;
+		} else {
+			buffer = req->req.buf + req->req.actual;
+			length = ioread32(ep->fotg210->reg +
+					FOTG210_FIBCR(ep->epnum - 1)) & FIBCR_BCFX;
+			if (length > req->req.length - req->req.actual)
+				length = req->req.length - req->req.actual;
+		}
+	} else {
+		buffer = req->req.buf + req->req.actual;
+		if (req->req.length - req->req.actual > ep->ep.maxpacket)
+			length = ep->ep.maxpacket;
+		else
+			length = req->req.length - req->req.actual;
+	}
+
+	d = dma_map_single(dev, buffer, length,
+			ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+	if (dma_mapping_error(dev, d)) {
+		pr_err("dma_mapping_error\n");
+		return;
+	}
+
+	fotg210_enable_dma(ep, d, length);
+
+	/* check if dma is done */
+	fotg210_wait_dma_done(ep);
+
+	fotg210_disable_dma(ep);
+
+	/* update actual transfer length */
+	req->req.actual += length;
+
+	dma_unmap_single(dev, d, length, DMA_TO_DEVICE);
+}
+
+static void fotg210_ep0_queue(struct fotg210_ep *ep,
+				struct fotg210_request *req)
+{
+	if (!req->req.length) {
+		fotg210_done(ep, req, 0);
+		return;
+	}
+	if (ep->dir_in) { /* if IN */
+		fotg210_start_dma(ep, req);
+		if (req->req.length == req->req.actual)
+			fotg210_done(ep, req, 0);
+	} else { /* OUT */
+		u32 value = ioread32(ep->fotg210->reg + FOTG210_DMISGR0);
+
+		value &= ~DMISGR0_MCX_OUT_INT;
+		iowrite32(value, ep->fotg210->reg + FOTG210_DMISGR0);
+	}
+}
+
+static int fotg210_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+				gfp_t gfp_flags)
+{
+	struct fotg210_ep *ep;
+	struct fotg210_request *req;
+	unsigned long flags;
+	int request = 0;
+
+	ep = container_of(_ep, struct fotg210_ep, ep);
+	req = container_of(_req, struct fotg210_request, req);
+
+	if (ep->fotg210->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&ep->fotg210->lock, flags);
+
+	if (list_empty(&ep->queue))
+		request = 1;
+
+	list_add_tail(&req->queue, &ep->queue);
+
+	req->req.actual = 0;
+	req->req.status = -EINPROGRESS;
+
+	if (!ep->epnum) /* ep0 */
+		fotg210_ep0_queue(ep, req);
+	else if (request && !ep->stall)
+		fotg210_enable_fifo_int(ep);
+
+	spin_unlock_irqrestore(&ep->fotg210->lock, flags);
+
+	return 0;
+}
+
+static int fotg210_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct fotg210_ep *ep;
+	struct fotg210_request *req;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct fotg210_ep, ep);
+	req = container_of(_req, struct fotg210_request, req);
+
+	spin_lock_irqsave(&ep->fotg210->lock, flags);
+	if (!list_empty(&ep->queue))
+		fotg210_done(ep, req, -ECONNRESET);
+	spin_unlock_irqrestore(&ep->fotg210->lock, flags);
+
+	return 0;
+}
+
+static void fotg210_set_epnstall(struct fotg210_ep *ep)
+{
+	struct fotg210_udc *fotg210 = ep->fotg210;
+	u32 value;
+	void __iomem *reg;
+
+	/* check if IN FIFO is empty before stall */
+	if (ep->dir_in) {
+		do {
+			value = ioread32(fotg210->reg + FOTG210_DCFESR);
+		} while (!(value & DCFESR_FIFO_EMPTY(ep->epnum - 1)));
+	}
+
+	reg = (ep->dir_in) ?
+		fotg210->reg + FOTG210_INEPMPSR(ep->epnum) :
+		fotg210->reg + FOTG210_OUTEPMPSR(ep->epnum);
+	value = ioread32(reg);
+	value |= INOUTEPMPSR_STL_EP;
+	iowrite32(value, reg);
+}
+
+static void fotg210_clear_epnstall(struct fotg210_ep *ep)
+{
+	struct fotg210_udc *fotg210 = ep->fotg210;
+	u32 value;
+	void __iomem *reg;
+
+	reg = (ep->dir_in) ?
+		fotg210->reg + FOTG210_INEPMPSR(ep->epnum) :
+		fotg210->reg + FOTG210_OUTEPMPSR(ep->epnum);
+	value = ioread32(reg);
+	value &= ~INOUTEPMPSR_STL_EP;
+	iowrite32(value, reg);
+}
+
+static int fotg210_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedge)
+{
+	struct fotg210_ep *ep;
+	struct fotg210_udc *fotg210;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct fotg210_ep, ep);
+
+	fotg210 = ep->fotg210;
+
+	spin_lock_irqsave(&ep->fotg210->lock, flags);
+
+	if (value) {
+		fotg210_set_epnstall(ep);
+		ep->stall = 1;
+		if (wedge)
+			ep->wedged = 1;
+	} else {
+		fotg210_reset_tseq(fotg210, ep->epnum);
+		fotg210_clear_epnstall(ep);
+		ep->stall = 0;
+		ep->wedged = 0;
+		if (!list_empty(&ep->queue))
+			fotg210_enable_fifo_int(ep);
+	}
+
+	spin_unlock_irqrestore(&ep->fotg210->lock, flags);
+	return 0;
+}
+
+static int fotg210_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	return fotg210_set_halt_and_wedge(_ep, value, 0);
+}
+
+static int fotg210_ep_set_wedge(struct usb_ep *_ep)
+{
+	return fotg210_set_halt_and_wedge(_ep, 1, 1);
+}
+
+static void fotg210_ep_fifo_flush(struct usb_ep *_ep)
+{
+}
+
+static const struct usb_ep_ops fotg210_ep_ops = {
+	.enable		= fotg210_ep_enable,
+	.disable	= fotg210_ep_disable,
+
+	.alloc_request	= fotg210_ep_alloc_request,
+	.free_request	= fotg210_ep_free_request,
+
+	.queue		= fotg210_ep_queue,
+	.dequeue	= fotg210_ep_dequeue,
+
+	.set_halt	= fotg210_ep_set_halt,
+	.fifo_flush	= fotg210_ep_fifo_flush,
+	.set_wedge	= fotg210_ep_set_wedge,
+};
+
+static void fotg210_clear_tx0byte(struct fotg210_udc *fotg210)
+{
+	u32 value = ioread32(fotg210->reg + FOTG210_TX0BYTE);
+
+	value &= ~(TX0BYTE_EP1 | TX0BYTE_EP2 | TX0BYTE_EP3
+		   | TX0BYTE_EP4);
+	iowrite32(value, fotg210->reg + FOTG210_TX0BYTE);
+}
+
+static void fotg210_clear_rx0byte(struct fotg210_udc *fotg210)
+{
+	u32 value = ioread32(fotg210->reg + FOTG210_RX0BYTE);
+
+	value &= ~(RX0BYTE_EP1 | RX0BYTE_EP2 | RX0BYTE_EP3
+		   | RX0BYTE_EP4);
+	iowrite32(value, fotg210->reg + FOTG210_RX0BYTE);
+}
+
+/* read 8-byte setup packet only */
+static void fotg210_rdsetupp(struct fotg210_udc *fotg210,
+		   u8 *buffer)
+{
+	int i = 0;
+	u8 *tmp = buffer;
+	u32 data;
+	u32 length = 8;
+
+	iowrite32(DMATFNR_ACC_CXF, fotg210->reg + FOTG210_DMATFNR);
+
+	for (i = (length >> 2); i > 0; i--) {
+		data = ioread32(fotg210->reg + FOTG210_CXPORT);
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		*(tmp + 2) = (data >> 16) & 0xFF;
+		*(tmp + 3) = (data >> 24) & 0xFF;
+		tmp = tmp + 4;
+	}
+
+	switch (length % 4) {
+	case 1:
+		data = ioread32(fotg210->reg + FOTG210_CXPORT);
+		*tmp = data & 0xFF;
+		break;
+	case 2:
+		data = ioread32(fotg210->reg + FOTG210_CXPORT);
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		break;
+	case 3:
+		data = ioread32(fotg210->reg + FOTG210_CXPORT);
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		*(tmp + 2) = (data >> 16) & 0xFF;
+		break;
+	default:
+		break;
+	}
+
+	iowrite32(DMATFNR_DISDMA, fotg210->reg + FOTG210_DMATFNR);
+}
+
+static void fotg210_set_configuration(struct fotg210_udc *fotg210)
+{
+	u32 value = ioread32(fotg210->reg + FOTG210_DAR);
+
+	value |= DAR_AFT_CONF;
+	iowrite32(value, fotg210->reg + FOTG210_DAR);
+}
+
+static void fotg210_set_dev_addr(struct fotg210_udc *fotg210, u32 addr)
+{
+	u32 value = ioread32(fotg210->reg + FOTG210_DAR);
+
+	value |= (addr & 0x7F);
+	iowrite32(value, fotg210->reg + FOTG210_DAR);
+}
+
+static void fotg210_set_cxstall(struct fotg210_udc *fotg210)
+{
+	u32 value = ioread32(fotg210->reg + FOTG210_DCFESR);
+
+	value |= DCFESR_CX_STL;
+	iowrite32(value, fotg210->reg + FOTG210_DCFESR);
+}
+
+static void fotg210_request_error(struct fotg210_udc *fotg210)
+{
+	fotg210_set_cxstall(fotg210);
+	pr_err("request error!!\n");
+}
+
+static void fotg210_set_address(struct fotg210_udc *fotg210,
+				struct usb_ctrlrequest *ctrl)
+{
+	if (le16_to_cpu(ctrl->wValue) >= 0x0100) {
+		fotg210_request_error(fotg210);
+	} else {
+		fotg210_set_dev_addr(fotg210, le16_to_cpu(ctrl->wValue));
+		fotg210_set_cxdone(fotg210);
+	}
+}
+
+static void fotg210_set_feature(struct fotg210_udc *fotg210,
+				struct usb_ctrlrequest *ctrl)
+{
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		fotg210_set_cxdone(fotg210);
+		break;
+	case USB_RECIP_INTERFACE:
+		fotg210_set_cxdone(fotg210);
+		break;
+	case USB_RECIP_ENDPOINT: {
+		u8 epnum;
+		epnum = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK;
+		if (epnum)
+			fotg210_set_epnstall(fotg210->ep[epnum]);
+		else
+			fotg210_set_cxstall(fotg210);
+		fotg210_set_cxdone(fotg210);
+		}
+		break;
+	default:
+		fotg210_request_error(fotg210);
+		break;
+	}
+}
+
+static void fotg210_clear_feature(struct fotg210_udc *fotg210,
+				struct usb_ctrlrequest *ctrl)
+{
+	struct fotg210_ep *ep =
+		fotg210->ep[ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK];
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		fotg210_set_cxdone(fotg210);
+		break;
+	case USB_RECIP_INTERFACE:
+		fotg210_set_cxdone(fotg210);
+		break;
+	case USB_RECIP_ENDPOINT:
+		if (ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK) {
+			if (ep->wedged) {
+				fotg210_set_cxdone(fotg210);
+				break;
+			}
+			if (ep->stall)
+				fotg210_set_halt_and_wedge(&ep->ep, 0, 0);
+		}
+		fotg210_set_cxdone(fotg210);
+		break;
+	default:
+		fotg210_request_error(fotg210);
+		break;
+	}
+}
+
+static int fotg210_is_epnstall(struct fotg210_ep *ep)
+{
+	struct fotg210_udc *fotg210 = ep->fotg210;
+	u32 value;
+	void __iomem *reg;
+
+	reg = (ep->dir_in) ?
+		fotg210->reg + FOTG210_INEPMPSR(ep->epnum) :
+		fotg210->reg + FOTG210_OUTEPMPSR(ep->epnum);
+	value = ioread32(reg);
+	return value & INOUTEPMPSR_STL_EP ? 1 : 0;
+}
+
+/* For EP0 requests triggered by this driver (currently GET_STATUS response) */
+static void fotg210_ep0_complete(struct usb_ep *_ep, struct usb_request *req)
+{
+	struct fotg210_ep *ep;
+	struct fotg210_udc *fotg210;
+
+	ep = container_of(_ep, struct fotg210_ep, ep);
+	fotg210 = ep->fotg210;
+
+	if (req->status || req->actual != req->length) {
+		dev_warn(&fotg210->gadget.dev, "EP0 request failed: %d\n", req->status);
+	}
+}
+
+static void fotg210_get_status(struct fotg210_udc *fotg210,
+				struct usb_ctrlrequest *ctrl)
+{
+	u8 epnum;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		fotg210->ep0_data = cpu_to_le16(1 << USB_DEVICE_SELF_POWERED);
+		break;
+	case USB_RECIP_INTERFACE:
+		fotg210->ep0_data = cpu_to_le16(0);
+		break;
+	case USB_RECIP_ENDPOINT:
+		epnum = ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK;
+		if (epnum)
+			fotg210->ep0_data =
+				cpu_to_le16(fotg210_is_epnstall(fotg210->ep[epnum])
+					    << USB_ENDPOINT_HALT);
+		else
+			fotg210_request_error(fotg210);
+		break;
+
+	default:
+		fotg210_request_error(fotg210);
+		return;		/* exit */
+	}
+
+	fotg210->ep0_req->buf = &fotg210->ep0_data;
+	fotg210->ep0_req->length = 2;
+
+	spin_unlock(&fotg210->lock);
+	fotg210_ep_queue(fotg210->gadget.ep0, fotg210->ep0_req, GFP_ATOMIC);
+	spin_lock(&fotg210->lock);
+}
+
+static int fotg210_setup_packet(struct fotg210_udc *fotg210,
+				struct usb_ctrlrequest *ctrl)
+{
+	u8 *p = (u8 *)ctrl;
+	u8 ret = 0;
+
+	fotg210_rdsetupp(fotg210, p);
+
+	fotg210->ep[0]->dir_in = ctrl->bRequestType & USB_DIR_IN;
+
+	if (fotg210->gadget.speed == USB_SPEED_UNKNOWN) {
+		u32 value = ioread32(fotg210->reg + FOTG210_DMCR);
+		fotg210->gadget.speed = value & DMCR_HS_EN ?
+				USB_SPEED_HIGH : USB_SPEED_FULL;
+	}
+
+	/* check request */
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (ctrl->bRequest) {
+		case USB_REQ_GET_STATUS:
+			fotg210_get_status(fotg210, ctrl);
+			break;
+		case USB_REQ_CLEAR_FEATURE:
+			fotg210_clear_feature(fotg210, ctrl);
+			break;
+		case USB_REQ_SET_FEATURE:
+			fotg210_set_feature(fotg210, ctrl);
+			break;
+		case USB_REQ_SET_ADDRESS:
+			fotg210_set_address(fotg210, ctrl);
+			break;
+		case USB_REQ_SET_CONFIGURATION:
+			fotg210_set_configuration(fotg210);
+			ret = 1;
+			break;
+		default:
+			ret = 1;
+			break;
+		}
+	} else {
+		ret = 1;
+	}
+
+	return ret;
+}
+
+static void fotg210_ep0out(struct fotg210_udc *fotg210)
+{
+	struct fotg210_ep *ep = fotg210->ep[0];
+
+	if (!list_empty(&ep->queue) && !ep->dir_in) {
+		struct fotg210_request *req;
+
+		req = list_first_entry(&ep->queue,
+			struct fotg210_request, queue);
+
+		if (req->req.length)
+			fotg210_start_dma(ep, req);
+
+		if ((req->req.length - req->req.actual) < ep->ep.maxpacket)
+			fotg210_done(ep, req, 0);
+	} else {
+		pr_err("%s : empty queue\n", __func__);
+	}
+}
+
+static void fotg210_ep0in(struct fotg210_udc *fotg210)
+{
+	struct fotg210_ep *ep = fotg210->ep[0];
+
+	if ((!list_empty(&ep->queue)) && (ep->dir_in)) {
+		struct fotg210_request *req;
+
+		req = list_entry(ep->queue.next,
+				struct fotg210_request, queue);
+
+		if (req->req.length)
+			fotg210_start_dma(ep, req);
+
+		if (req->req.actual == req->req.length)
+			fotg210_done(ep, req, 0);
+	} else {
+		fotg210_set_cxdone(fotg210);
+	}
+}
+
+static void fotg210_clear_comabt_int(struct fotg210_udc *fotg210)
+{
+	u32 value = ioread32(fotg210->reg + FOTG210_DISGR0);
+
+	value &= ~DISGR0_CX_COMABT_INT;
+	iowrite32(value, fotg210->reg + FOTG210_DISGR0);
+}
+
+static void fotg210_in_fifo_handler(struct fotg210_ep *ep)
+{
+	struct fotg210_request *req = list_entry(ep->queue.next,
+					struct fotg210_request, queue);
+
+	if (req->req.length)
+		fotg210_start_dma(ep, req);
+	fotg210_done(ep, req, 0);
+}
+
+static void fotg210_out_fifo_handler(struct fotg210_ep *ep)
+{
+	struct fotg210_request *req = list_entry(ep->queue.next,
+						 struct fotg210_request, queue);
+	int disgr1 = ioread32(ep->fotg210->reg + FOTG210_DISGR1);
+
+	fotg210_start_dma(ep, req);
+
+	/* Complete the request when it's full or a short packet arrived.
+	 * Like other drivers, short_not_ok isn't handled.
+	 */
+
+	if (req->req.length == req->req.actual ||
+	    (disgr1 & DISGR1_SPK_INT(ep->epnum - 1)))
+		fotg210_done(ep, req, 0);
+}
+
+static irqreturn_t fotg210_irq(int irq, void *_fotg210)
+{
+	struct fotg210_udc *fotg210 = _fotg210;
+	u32 int_grp = ioread32(fotg210->reg + FOTG210_DIGR);
+	u32 int_msk = ioread32(fotg210->reg + FOTG210_DMIGR);
+
+	int_grp &= ~int_msk;
+
+	spin_lock(&fotg210->lock);
+
+	if (int_grp & DIGR_INT_G2) {
+		void __iomem *reg = fotg210->reg + FOTG210_DISGR2;
+		u32 int_grp2 = ioread32(reg);
+		u32 int_msk2 = ioread32(fotg210->reg + FOTG210_DMISGR2);
+		u32 value;
+
+		int_grp2 &= ~int_msk2;
+
+		if (int_grp2 & DISGR2_USBRST_INT) {
+			usb_gadget_udc_reset(&fotg210->gadget,
+					     fotg210->driver);
+			value = ioread32(reg);
+			value &= ~DISGR2_USBRST_INT;
+			iowrite32(value, reg);
+			pr_info("fotg210 udc reset\n");
+		}
+		if (int_grp2 & DISGR2_SUSP_INT) {
+			value = ioread32(reg);
+			value &= ~DISGR2_SUSP_INT;
+			iowrite32(value, reg);
+			pr_info("fotg210 udc suspend\n");
+		}
+		if (int_grp2 & DISGR2_RESM_INT) {
+			value = ioread32(reg);
+			value &= ~DISGR2_RESM_INT;
+			iowrite32(value, reg);
+			pr_info("fotg210 udc resume\n");
+		}
+		if (int_grp2 & DISGR2_ISO_SEQ_ERR_INT) {
+			value = ioread32(reg);
+			value &= ~DISGR2_ISO_SEQ_ERR_INT;
+			iowrite32(value, reg);
+			pr_info("fotg210 iso sequence error\n");
+		}
+		if (int_grp2 & DISGR2_ISO_SEQ_ABORT_INT) {
+			value = ioread32(reg);
+			value &= ~DISGR2_ISO_SEQ_ABORT_INT;
+			iowrite32(value, reg);
+			pr_info("fotg210 iso sequence abort\n");
+		}
+		if (int_grp2 & DISGR2_TX0BYTE_INT) {
+			fotg210_clear_tx0byte(fotg210);
+			value = ioread32(reg);
+			value &= ~DISGR2_TX0BYTE_INT;
+			iowrite32(value, reg);
+			pr_info("fotg210 transferred 0 byte\n");
+		}
+		if (int_grp2 & DISGR2_RX0BYTE_INT) {
+			fotg210_clear_rx0byte(fotg210);
+			value = ioread32(reg);
+			value &= ~DISGR2_RX0BYTE_INT;
+			iowrite32(value, reg);
+			pr_info("fotg210 received 0 byte\n");
+		}
+		if (int_grp2 & DISGR2_DMA_ERROR) {
+			value = ioread32(reg);
+			value &= ~DISGR2_DMA_ERROR;
+			iowrite32(value, reg);
+		}
+	}
+
+	if (int_grp & DIGR_INT_G0) {
+		void __iomem *reg = fotg210->reg + FOTG210_DISGR0;
+		u32 int_grp0 = ioread32(reg);
+		u32 int_msk0 = ioread32(fotg210->reg + FOTG210_DMISGR0);
+		struct usb_ctrlrequest ctrl;
+
+		int_grp0 &= ~int_msk0;
+
+		/* the highest priority in this source register */
+		if (int_grp0 & DISGR0_CX_COMABT_INT) {
+			fotg210_clear_comabt_int(fotg210);
+			pr_info("fotg210 CX command abort\n");
+		}
+
+		if (int_grp0 & DISGR0_CX_SETUP_INT) {
+			if (fotg210_setup_packet(fotg210, &ctrl)) {
+				spin_unlock(&fotg210->lock);
+				if (fotg210->driver->setup(&fotg210->gadget,
+							   &ctrl) < 0)
+					fotg210_set_cxstall(fotg210);
+				spin_lock(&fotg210->lock);
+			}
+		}
+		if (int_grp0 & DISGR0_CX_COMEND_INT)
+			pr_info("fotg210 cmd end\n");
+
+		if (int_grp0 & DISGR0_CX_IN_INT)
+			fotg210_ep0in(fotg210);
+
+		if (int_grp0 & DISGR0_CX_OUT_INT)
+			fotg210_ep0out(fotg210);
+
+		if (int_grp0 & DISGR0_CX_COMFAIL_INT) {
+			fotg210_set_cxstall(fotg210);
+			pr_info("fotg210 ep0 fail\n");
+		}
+	}
+
+	if (int_grp & DIGR_INT_G1) {
+		void __iomem *reg = fotg210->reg + FOTG210_DISGR1;
+		u32 int_grp1 = ioread32(reg);
+		u32 int_msk1 = ioread32(fotg210->reg + FOTG210_DMISGR1);
+		int fifo;
+
+		int_grp1 &= ~int_msk1;
+
+		for (fifo = 0; fifo < FOTG210_MAX_FIFO_NUM; fifo++) {
+			if (int_grp1 & DISGR1_IN_INT(fifo))
+				fotg210_in_fifo_handler(fotg210->ep[fifo + 1]);
+
+			if ((int_grp1 & DISGR1_OUT_INT(fifo)) ||
+			    (int_grp1 & DISGR1_SPK_INT(fifo)))
+				fotg210_out_fifo_handler(fotg210->ep[fifo + 1]);
+		}
+	}
+
+	spin_unlock(&fotg210->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void fotg210_disable_unplug(struct fotg210_udc *fotg210)
+{
+	u32 reg = ioread32(fotg210->reg + FOTG210_PHYTMSR);
+
+	reg &= ~PHYTMSR_UNPLUG;
+	iowrite32(reg, fotg210->reg + FOTG210_PHYTMSR);
+}
+
+static int fotg210_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct fotg210_udc *fotg210 = gadget_to_fotg210(g);
+	u32 value;
+
+	/* hook up the driver */
+	fotg210->driver = driver;
+
+	/* enable device global interrupt */
+	value = ioread32(fotg210->reg + FOTG210_DMCR);
+	value |= DMCR_GLINT_EN;
+	iowrite32(value, fotg210->reg + FOTG210_DMCR);
+
+	return 0;
+}
+
+static void fotg210_init(struct fotg210_udc *fotg210)
+{
+	u32 value;
+
+	/* disable global interrupt and set int polarity to active high */
+	iowrite32(GMIR_MHC_INT | GMIR_MOTG_INT | GMIR_INT_POLARITY,
+		  fotg210->reg + FOTG210_GMIR);
+
+	/* disable device global interrupt */
+	value = ioread32(fotg210->reg + FOTG210_DMCR);
+	value &= ~DMCR_GLINT_EN;
+	iowrite32(value, fotg210->reg + FOTG210_DMCR);
+
+	/* enable only grp2 irqs we handle */
+	iowrite32(~(DISGR2_DMA_ERROR | DISGR2_RX0BYTE_INT | DISGR2_TX0BYTE_INT
+		    | DISGR2_ISO_SEQ_ABORT_INT | DISGR2_ISO_SEQ_ERR_INT
+		    | DISGR2_RESM_INT | DISGR2_SUSP_INT | DISGR2_USBRST_INT),
+		  fotg210->reg + FOTG210_DMISGR2);
+
+	/* disable all fifo interrupt */
+	iowrite32(~(u32)0, fotg210->reg + FOTG210_DMISGR1);
+
+	/* disable cmd end */
+	value = ioread32(fotg210->reg + FOTG210_DMISGR0);
+	value |= DMISGR0_MCX_COMEND;
+	iowrite32(value, fotg210->reg + FOTG210_DMISGR0);
+}
+
+static int fotg210_udc_stop(struct usb_gadget *g)
+{
+	struct fotg210_udc *fotg210 = gadget_to_fotg210(g);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&fotg210->lock, flags);
+
+	fotg210_init(fotg210);
+	fotg210->driver = NULL;
+
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops fotg210_gadget_ops = {
+	.udc_start		= fotg210_udc_start,
+	.udc_stop		= fotg210_udc_stop,
+};
+
+static int fotg210_udc_remove(struct platform_device *pdev)
+{
+	struct fotg210_udc *fotg210 = platform_get_drvdata(pdev);
+	int i;
+
+	usb_del_gadget_udc(&fotg210->gadget);
+	iounmap(fotg210->reg);
+	free_irq(platform_get_irq(pdev, 0), fotg210);
+
+	fotg210_ep_free_request(&fotg210->ep[0]->ep, fotg210->ep0_req);
+	for (i = 0; i < FOTG210_MAX_NUM_EP; i++)
+		kfree(fotg210->ep[i]);
+	kfree(fotg210);
+
+	return 0;
+}
+
+static int fotg210_udc_probe(struct platform_device *pdev)
+{
+	struct resource *res, *ires;
+	struct fotg210_udc *fotg210 = NULL;
+	struct fotg210_ep *_ep[FOTG210_MAX_NUM_EP];
+	int ret = 0;
+	int i;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		pr_err("platform_get_resource error.\n");
+		return -ENODEV;
+	}
+
+	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!ires) {
+		pr_err("platform_get_resource IORESOURCE_IRQ error.\n");
+		return -ENODEV;
+	}
+
+	ret = -ENOMEM;
+
+	/* initialize udc */
+	fotg210 = kzalloc(sizeof(struct fotg210_udc), GFP_KERNEL);
+	if (fotg210 == NULL)
+		goto err;
+
+	for (i = 0; i < FOTG210_MAX_NUM_EP; i++) {
+		_ep[i] = kzalloc(sizeof(struct fotg210_ep), GFP_KERNEL);
+		if (_ep[i] == NULL)
+			goto err_alloc;
+		fotg210->ep[i] = _ep[i];
+	}
+
+	fotg210->reg = ioremap(res->start, resource_size(res));
+	if (fotg210->reg == NULL) {
+		pr_err("ioremap error.\n");
+		goto err_alloc;
+	}
+
+	spin_lock_init(&fotg210->lock);
+
+	platform_set_drvdata(pdev, fotg210);
+
+	fotg210->gadget.ops = &fotg210_gadget_ops;
+
+	fotg210->gadget.max_speed = USB_SPEED_HIGH;
+	fotg210->gadget.dev.parent = &pdev->dev;
+	fotg210->gadget.dev.dma_mask = pdev->dev.dma_mask;
+	fotg210->gadget.name = udc_name;
+
+	INIT_LIST_HEAD(&fotg210->gadget.ep_list);
+
+	for (i = 0; i < FOTG210_MAX_NUM_EP; i++) {
+		struct fotg210_ep *ep = fotg210->ep[i];
+
+		if (i) {
+			INIT_LIST_HEAD(&fotg210->ep[i]->ep.ep_list);
+			list_add_tail(&fotg210->ep[i]->ep.ep_list,
+				      &fotg210->gadget.ep_list);
+		}
+		ep->fotg210 = fotg210;
+		INIT_LIST_HEAD(&ep->queue);
+		ep->ep.name = fotg210_ep_name[i];
+		ep->ep.ops = &fotg210_ep_ops;
+		usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
+
+		if (i == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
+	}
+	usb_ep_set_maxpacket_limit(&fotg210->ep[0]->ep, 0x40);
+	fotg210->gadget.ep0 = &fotg210->ep[0]->ep;
+	INIT_LIST_HEAD(&fotg210->gadget.ep0->ep_list);
+
+	fotg210->ep0_req = fotg210_ep_alloc_request(&fotg210->ep[0]->ep,
+				GFP_KERNEL);
+	if (fotg210->ep0_req == NULL)
+		goto err_map;
+
+	fotg210->ep0_req->complete = fotg210_ep0_complete;
+
+	fotg210_init(fotg210);
+
+	fotg210_disable_unplug(fotg210);
+
+	ret = request_irq(ires->start, fotg210_irq, IRQF_SHARED,
+			  udc_name, fotg210);
+	if (ret < 0) {
+		pr_err("request_irq error (%d)\n", ret);
+		goto err_req;
+	}
+
+	ret = usb_add_gadget_udc(&pdev->dev, &fotg210->gadget);
+	if (ret)
+		goto err_add_udc;
+
+	dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
+
+	return 0;
+
+err_add_udc:
+	free_irq(ires->start, fotg210);
+
+err_req:
+	fotg210_ep_free_request(&fotg210->ep[0]->ep, fotg210->ep0_req);
+
+err_map:
+	iounmap(fotg210->reg);
+
+err_alloc:
+	for (i = 0; i < FOTG210_MAX_NUM_EP; i++)
+		kfree(fotg210->ep[i]);
+	kfree(fotg210);
+
+err:
+	return ret;
+}
+
+static struct platform_driver fotg210_driver = {
+	.driver		= {
+		.name =	udc_name,
+	},
+	.probe		= fotg210_udc_probe,
+	.remove		= fotg210_udc_remove,
+};
+
+module_platform_driver(fotg210_driver);
+
+MODULE_AUTHOR("Yuan-Hsin Chen, Feng-Hsin Chiang <john453@faraday-tech.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/gadget/udc/fotg210.h b/drivers/usb/gadget/udc/fotg210.h
new file mode 100644
index 000000000..08c329575
--- /dev/null
+++ b/drivers/usb/gadget/udc/fotg210.h
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Faraday FOTG210 USB OTG controller
+ *
+ * Copyright (C) 2013 Faraday Technology Corporation
+ * Author: Yuan-Hsin Chen <yhchen@faraday-tech.com>
+ */
+
+#include <linux/kernel.h>
+
+#define FOTG210_MAX_NUM_EP	5 /* ep0...ep4 */
+#define FOTG210_MAX_FIFO_NUM	4 /* fifo0...fifo4 */
+
+/* Global Mask of HC/OTG/DEV interrupt Register(0xC4) */
+#define FOTG210_GMIR		0xC4
+#define GMIR_INT_POLARITY	0x8 /*Active High*/
+#define GMIR_MHC_INT		0x4
+#define GMIR_MOTG_INT		0x2
+#define GMIR_MDEV_INT		0x1
+
+/*  Device Main Control Register(0x100) */
+#define FOTG210_DMCR		0x100
+#define DMCR_HS_EN		(1 << 6)
+#define DMCR_CHIP_EN		(1 << 5)
+#define DMCR_SFRST		(1 << 4)
+#define DMCR_GOSUSP		(1 << 3)
+#define DMCR_GLINT_EN		(1 << 2)
+#define DMCR_HALF_SPEED		(1 << 1)
+#define DMCR_CAP_RMWAKUP	(1 << 0)
+
+/* Device Address Register(0x104) */
+#define FOTG210_DAR		0x104
+#define DAR_AFT_CONF		(1 << 7)
+
+/* Device Test Register(0x108) */
+#define FOTG210_DTR		0x108
+#define DTR_TST_CLRFF		(1 << 0)
+
+/* PHY Test Mode Selector register(0x114) */
+#define FOTG210_PHYTMSR		0x114
+#define PHYTMSR_TST_PKT		(1 << 4)
+#define PHYTMSR_TST_SE0NAK	(1 << 3)
+#define PHYTMSR_TST_KSTA	(1 << 2)
+#define PHYTMSR_TST_JSTA	(1 << 1)
+#define PHYTMSR_UNPLUG		(1 << 0)
+
+/* Cx configuration and FIFO Empty Status register(0x120) */
+#define FOTG210_DCFESR		0x120
+#define DCFESR_FIFO_EMPTY(fifo)	(1 << 8 << (fifo))
+#define DCFESR_CX_EMP		(1 << 5)
+#define DCFESR_CX_CLR		(1 << 3)
+#define DCFESR_CX_STL		(1 << 2)
+#define DCFESR_TST_PKDONE	(1 << 1)
+#define DCFESR_CX_DONE		(1 << 0)
+
+/* Device IDLE Counter Register(0x124) */
+#define FOTG210_DICR		0x124
+
+/* Device Mask of Interrupt Group Register (0x130) */
+#define FOTG210_DMIGR		0x130
+#define DMIGR_MINT_G0		(1 << 0)
+
+/* Device Mask of Interrupt Source Group 0(0x134) */
+#define FOTG210_DMISGR0		0x134
+#define DMISGR0_MCX_COMEND	(1 << 3)
+#define DMISGR0_MCX_OUT_INT	(1 << 2)
+#define DMISGR0_MCX_IN_INT	(1 << 1)
+#define DMISGR0_MCX_SETUP_INT	(1 << 0)
+
+/* Device Mask of Interrupt Source Group 1 Register(0x138)*/
+#define FOTG210_DMISGR1		0x138
+#define DMISGR1_MF3_IN_INT	(1 << 19)
+#define DMISGR1_MF2_IN_INT	(1 << 18)
+#define DMISGR1_MF1_IN_INT	(1 << 17)
+#define DMISGR1_MF0_IN_INT	(1 << 16)
+#define DMISGR1_MF_IN_INT(fifo)	(1 << (16 + (fifo)))
+#define DMISGR1_MF3_SPK_INT	(1 << 7)
+#define DMISGR1_MF3_OUT_INT	(1 << 6)
+#define DMISGR1_MF2_SPK_INT	(1 << 5)
+#define DMISGR1_MF2_OUT_INT	(1 << 4)
+#define DMISGR1_MF1_SPK_INT	(1 << 3)
+#define DMISGR1_MF1_OUT_INT	(1 << 2)
+#define DMISGR1_MF0_SPK_INT	(1 << 1)
+#define DMISGR1_MF0_OUT_INT	(1 << 0)
+#define DMISGR1_MF_OUTSPK_INT(fifo)	(0x3 << (fifo) * 2)
+
+/* Device Mask of Interrupt Source Group 2 Register (0x13C) */
+#define FOTG210_DMISGR2		0x13C
+#define DMISGR2_MDMA_ERROR	(1 << 8)
+#define DMISGR2_MDMA_CMPLT	(1 << 7)
+
+/* Device Interrupt group Register (0x140) */
+#define FOTG210_DIGR		0x140
+#define DIGR_INT_G2		(1 << 2)
+#define DIGR_INT_G1		(1 << 1)
+#define DIGR_INT_G0		(1 << 0)
+
+/* Device Interrupt Source Group 0 Register (0x144) */
+#define FOTG210_DISGR0		0x144
+#define DISGR0_CX_COMABT_INT	(1 << 5)
+#define DISGR0_CX_COMFAIL_INT	(1 << 4)
+#define DISGR0_CX_COMEND_INT	(1 << 3)
+#define DISGR0_CX_OUT_INT	(1 << 2)
+#define DISGR0_CX_IN_INT	(1 << 1)
+#define DISGR0_CX_SETUP_INT	(1 << 0)
+
+/* Device Interrupt Source Group 1 Register (0x148) */
+#define FOTG210_DISGR1		0x148
+#define DISGR1_OUT_INT(fifo)	(1 << ((fifo) * 2))
+#define DISGR1_SPK_INT(fifo)	(1 << 1 << ((fifo) * 2))
+#define DISGR1_IN_INT(fifo)	(1 << 16 << (fifo))
+
+/* Device Interrupt Source Group 2 Register (0x14C) */
+#define FOTG210_DISGR2		0x14C
+#define DISGR2_DMA_ERROR	(1 << 8)
+#define DISGR2_DMA_CMPLT	(1 << 7)
+#define DISGR2_RX0BYTE_INT	(1 << 6)
+#define DISGR2_TX0BYTE_INT	(1 << 5)
+#define DISGR2_ISO_SEQ_ABORT_INT	(1 << 4)
+#define DISGR2_ISO_SEQ_ERR_INT	(1 << 3)
+#define DISGR2_RESM_INT		(1 << 2)
+#define DISGR2_SUSP_INT		(1 << 1)
+#define DISGR2_USBRST_INT	(1 << 0)
+
+/* Device Receive Zero-Length Data Packet Register (0x150)*/
+#define FOTG210_RX0BYTE		0x150
+#define RX0BYTE_EP8		(1 << 7)
+#define RX0BYTE_EP7		(1 << 6)
+#define RX0BYTE_EP6		(1 << 5)
+#define RX0BYTE_EP5		(1 << 4)
+#define RX0BYTE_EP4		(1 << 3)
+#define RX0BYTE_EP3		(1 << 2)
+#define RX0BYTE_EP2		(1 << 1)
+#define RX0BYTE_EP1		(1 << 0)
+
+/* Device Transfer Zero-Length Data Packet Register (0x154)*/
+#define FOTG210_TX0BYTE		0x154
+#define TX0BYTE_EP8		(1 << 7)
+#define TX0BYTE_EP7		(1 << 6)
+#define TX0BYTE_EP6		(1 << 5)
+#define TX0BYTE_EP5		(1 << 4)
+#define TX0BYTE_EP4		(1 << 3)
+#define TX0BYTE_EP3		(1 << 2)
+#define TX0BYTE_EP2		(1 << 1)
+#define TX0BYTE_EP1		(1 << 0)
+
+/* Device IN Endpoint x MaxPacketSize Register(0x160+4*(x-1)) */
+#define FOTG210_INEPMPSR(ep)	(0x160 + 4 * ((ep) - 1))
+#define INOUTEPMPSR_MPS(mps)	((mps) & 0x2FF)
+#define INOUTEPMPSR_STL_EP	(1 << 11)
+#define INOUTEPMPSR_RESET_TSEQ	(1 << 12)
+
+/* Device OUT Endpoint x MaxPacketSize Register(0x180+4*(x-1)) */
+#define FOTG210_OUTEPMPSR(ep)	(0x180 + 4 * ((ep) - 1))
+
+/* Device Endpoint 1~4 Map Register (0x1A0) */
+#define FOTG210_EPMAP		0x1A0
+#define EPMAP_FIFONO(ep, dir)		\
+	((((ep) - 1) << ((ep) - 1) * 8) << ((dir) ? 0 : 4))
+#define EPMAP_FIFONOMSK(ep, dir)	\
+	((3 << ((ep) - 1) * 8) << ((dir) ? 0 : 4))
+
+/* Device FIFO Map Register (0x1A8) */
+#define FOTG210_FIFOMAP		0x1A8
+#define FIFOMAP_DIROUT(fifo)	(0x0 << 4 << (fifo) * 8)
+#define FIFOMAP_DIRIN(fifo)	(0x1 << 4 << (fifo) * 8)
+#define FIFOMAP_BIDIR(fifo)	(0x2 << 4 << (fifo) * 8)
+#define FIFOMAP_NA(fifo)	(0x3 << 4 << (fifo) * 8)
+#define FIFOMAP_EPNO(ep)	((ep) << ((ep) - 1) * 8)
+#define FIFOMAP_EPNOMSK(ep)	(0xF << ((ep) - 1) * 8)
+
+/* Device FIFO Confuguration Register (0x1AC) */
+#define FOTG210_FIFOCF		0x1AC
+#define FIFOCF_TYPE(type, fifo)	((type) << (fifo) * 8)
+#define FIFOCF_BLK_SIN(fifo)	(0x0 << (fifo) * 8 << 2)
+#define FIFOCF_BLK_DUB(fifo)	(0x1 << (fifo) * 8 << 2)
+#define FIFOCF_BLK_TRI(fifo)	(0x2 << (fifo) * 8 << 2)
+#define FIFOCF_BLKSZ_512(fifo)	(0x0 << (fifo) * 8 << 4)
+#define FIFOCF_BLKSZ_1024(fifo)	(0x1 << (fifo) * 8 << 4)
+#define FIFOCF_FIFO_EN(fifo)	(0x1 << (fifo) * 8 << 5)
+
+/* Device FIFO n Instruction and Byte Count Register (0x1B0+4*n) */
+#define FOTG210_FIBCR(fifo)	(0x1B0 + (fifo) * 4)
+#define FIBCR_BCFX		0x7FF
+#define FIBCR_FFRST		(1 << 12)
+
+/* Device DMA Target FIFO Number Register (0x1C0) */
+#define FOTG210_DMATFNR		0x1C0
+#define DMATFNR_ACC_CXF		(1 << 4)
+#define DMATFNR_ACC_F3		(1 << 3)
+#define DMATFNR_ACC_F2		(1 << 2)
+#define DMATFNR_ACC_F1		(1 << 1)
+#define DMATFNR_ACC_F0		(1 << 0)
+#define DMATFNR_ACC_FN(fifo)	(1 << (fifo))
+#define DMATFNR_DISDMA		0
+
+/* Device DMA Controller Parameter setting 1 Register (0x1C8) */
+#define FOTG210_DMACPSR1	0x1C8
+#define DMACPSR1_DMA_LEN(len)	(((len) & 0xFFFF) << 8)
+#define DMACPSR1_DMA_ABORT	(1 << 3)
+#define DMACPSR1_DMA_TYPE(dir_in)	(((dir_in) ? 1 : 0) << 1)
+#define DMACPSR1_DMA_START	(1 << 0)
+
+/* Device DMA Controller Parameter setting 2 Register (0x1CC) */
+#define FOTG210_DMACPSR2	0x1CC
+
+/* Device DMA Controller Parameter setting 3 Register (0x1CC) */
+#define FOTG210_CXPORT		0x1D0
+
+struct fotg210_request {
+	struct usb_request	req;
+	struct list_head	queue;
+};
+
+struct fotg210_ep {
+	struct usb_ep		ep;
+	struct fotg210_udc	*fotg210;
+
+	struct list_head	queue;
+	unsigned		stall:1;
+	unsigned		wedged:1;
+	unsigned		use_dma:1;
+
+	unsigned char		epnum;
+	unsigned char		type;
+	unsigned char		dir_in;
+	unsigned int		maxp;
+	const struct usb_endpoint_descriptor	*desc;
+};
+
+struct fotg210_udc {
+	spinlock_t		lock; /* protect the struct */
+	void __iomem		*reg;
+
+	unsigned long		irq_trigger;
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+
+	struct fotg210_ep	*ep[FOTG210_MAX_NUM_EP];
+
+	struct usb_request	*ep0_req;	/* for internal request */
+	__le16			ep0_data;
+	u8			ep0_dir;	/* 0/0x80  out/in */
+
+	u8			reenum;		/* if re-enumeration */
+};
+
+#define gadget_to_fotg210(g)	container_of((g), struct fotg210_udc, gadget)
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c
new file mode 100644
index 000000000..72b6d74b3
--- /dev/null
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.c
@@ -0,0 +1,2726 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * driver/usb/gadget/fsl_qe_udc.c
+ *
+ * Copyright (c) 2006-2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * 	Xie Xiaobo <X.Xie@freescale.com>
+ * 	Li Yang <leoli@freescale.com>
+ * 	Based on bareboard code from Shlomi Gridish.
+ *
+ * Description:
+ * Freescle QE/CPM USB Pheripheral Controller Driver
+ * The controller can be found on MPC8360, MPC8272, and etc.
+ * MPC8360 Rev 1.1 may need QE mircocode update
+ */
+
+#undef USB_TRACE
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/moduleparam.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <soc/fsl/qe/qe.h>
+#include <asm/cpm.h>
+#include <asm/dma.h>
+#include <asm/reg.h>
+#include "fsl_qe_udc.h"
+
+#define DRIVER_DESC     "Freescale QE/CPM USB Device Controller driver"
+#define DRIVER_AUTHOR   "Xie XiaoBo"
+#define DRIVER_VERSION  "1.0"
+
+#define DMA_ADDR_INVALID        (~(dma_addr_t)0)
+
+static const char driver_name[] = "fsl_qe_udc";
+static const char driver_desc[] = DRIVER_DESC;
+
+/*ep name is important in gadget, it should obey the convention of ep_match()*/
+static const char *const ep_name[] = {
+	"ep0-control", /* everyone has ep0 */
+	/* 3 configurable endpoints */
+	"ep1",
+	"ep2",
+	"ep3",
+};
+
+static const struct usb_endpoint_descriptor qe_ep0_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	0,
+	.bmAttributes =		USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize =	USB_MAX_CTRL_PAYLOAD,
+};
+
+/********************************************************************
+ *      Internal Used Function Start
+********************************************************************/
+/*-----------------------------------------------------------------
+ * done() - retire a request; caller blocked irqs
+ *--------------------------------------------------------------*/
+static void done(struct qe_ep *ep, struct qe_req *req, int status)
+{
+	struct qe_udc *udc = ep->udc;
+	unsigned char stopped = ep->stopped;
+
+	/* the req->queue pointer is used by ep_queue() func, in which
+	 * the request will be added into a udc_ep->queue 'd tail
+	 * so here the req will be dropped from the ep->queue
+	 */
+	list_del_init(&req->queue);
+
+	/* req.status should be set as -EINPROGRESS in ep_queue() */
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	if (req->mapped) {
+		dma_unmap_single(udc->gadget.dev.parent,
+			req->req.dma, req->req.length,
+			ep_is_in(ep)
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+		req->req.dma = DMA_ADDR_INVALID;
+		req->mapped = 0;
+	} else
+		dma_sync_single_for_cpu(udc->gadget.dev.parent,
+			req->req.dma, req->req.length,
+			ep_is_in(ep)
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+
+	if (status && (status != -ESHUTDOWN))
+		dev_vdbg(udc->dev, "complete %s req %p stat %d len %u/%u\n",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length);
+
+	/* don't modify queue heads during completion callback */
+	ep->stopped = 1;
+	spin_unlock(&udc->lock);
+
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+
+	spin_lock(&udc->lock);
+
+	ep->stopped = stopped;
+}
+
+/*-----------------------------------------------------------------
+ * nuke(): delete all requests related to this ep
+ *--------------------------------------------------------------*/
+static void nuke(struct qe_ep *ep, int status)
+{
+	/* Whether this eq has request linked */
+	while (!list_empty(&ep->queue)) {
+		struct qe_req *req = NULL;
+		req = list_entry(ep->queue.next, struct qe_req, queue);
+
+		done(ep, req, status);
+	}
+}
+
+/*---------------------------------------------------------------------------*
+ * USB and Endpoint manipulate process, include parameter and register       *
+ *---------------------------------------------------------------------------*/
+/* @value: 1--set stall 0--clean stall */
+static int qe_eprx_stall_change(struct qe_ep *ep, int value)
+{
+	u16 tem_usep;
+	u8 epnum = ep->epnum;
+	struct qe_udc *udc = ep->udc;
+
+	tem_usep = in_be16(&udc->usb_regs->usb_usep[epnum]);
+	tem_usep = tem_usep & ~USB_RHS_MASK;
+	if (value == 1)
+		tem_usep |= USB_RHS_STALL;
+	else if (ep->dir == USB_DIR_IN)
+		tem_usep |= USB_RHS_IGNORE_OUT;
+
+	out_be16(&udc->usb_regs->usb_usep[epnum], tem_usep);
+	return 0;
+}
+
+static int qe_eptx_stall_change(struct qe_ep *ep, int value)
+{
+	u16 tem_usep;
+	u8 epnum = ep->epnum;
+	struct qe_udc *udc = ep->udc;
+
+	tem_usep = in_be16(&udc->usb_regs->usb_usep[epnum]);
+	tem_usep = tem_usep & ~USB_THS_MASK;
+	if (value == 1)
+		tem_usep |= USB_THS_STALL;
+	else if (ep->dir == USB_DIR_OUT)
+		tem_usep |= USB_THS_IGNORE_IN;
+
+	out_be16(&udc->usb_regs->usb_usep[epnum], tem_usep);
+
+	return 0;
+}
+
+static int qe_ep0_stall(struct qe_udc *udc)
+{
+	qe_eptx_stall_change(&udc->eps[0], 1);
+	qe_eprx_stall_change(&udc->eps[0], 1);
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->ep0_dir = 0;
+	return 0;
+}
+
+static int qe_eprx_nack(struct qe_ep *ep)
+{
+	u8 epnum = ep->epnum;
+	struct qe_udc *udc = ep->udc;
+
+	if (ep->state == EP_STATE_IDLE) {
+		/* Set the ep's nack */
+		clrsetbits_be16(&udc->usb_regs->usb_usep[epnum],
+				USB_RHS_MASK, USB_RHS_NACK);
+
+		/* Mask Rx and Busy interrupts */
+		clrbits16(&udc->usb_regs->usb_usbmr,
+				(USB_E_RXB_MASK | USB_E_BSY_MASK));
+
+		ep->state = EP_STATE_NACK;
+	}
+	return 0;
+}
+
+static int qe_eprx_normal(struct qe_ep *ep)
+{
+	struct qe_udc *udc = ep->udc;
+
+	if (ep->state == EP_STATE_NACK) {
+		clrsetbits_be16(&udc->usb_regs->usb_usep[ep->epnum],
+				USB_RTHS_MASK, USB_THS_IGNORE_IN);
+
+		/* Unmask RX interrupts */
+		out_be16(&udc->usb_regs->usb_usber,
+				USB_E_BSY_MASK | USB_E_RXB_MASK);
+		setbits16(&udc->usb_regs->usb_usbmr,
+				(USB_E_RXB_MASK | USB_E_BSY_MASK));
+
+		ep->state = EP_STATE_IDLE;
+		ep->has_data = 0;
+	}
+
+	return 0;
+}
+
+static int qe_ep_cmd_stoptx(struct qe_ep *ep)
+{
+	if (ep->udc->soc_type == PORT_CPM)
+		cpm_command(CPM_USB_STOP_TX | (ep->epnum << CPM_USB_EP_SHIFT),
+				CPM_USB_STOP_TX_OPCODE);
+	else
+		qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB,
+				ep->epnum, 0);
+
+	return 0;
+}
+
+static int qe_ep_cmd_restarttx(struct qe_ep *ep)
+{
+	if (ep->udc->soc_type == PORT_CPM)
+		cpm_command(CPM_USB_RESTART_TX | (ep->epnum <<
+				CPM_USB_EP_SHIFT), CPM_USB_RESTART_TX_OPCODE);
+	else
+		qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB,
+				ep->epnum, 0);
+
+	return 0;
+}
+
+static int qe_ep_flushtxfifo(struct qe_ep *ep)
+{
+	struct qe_udc *udc = ep->udc;
+	int i;
+
+	i = (int)ep->epnum;
+
+	qe_ep_cmd_stoptx(ep);
+	out_8(&udc->usb_regs->usb_uscom,
+		USB_CMD_FLUSH_FIFO | (USB_CMD_EP_MASK & (ep->epnum)));
+	out_be16(&udc->ep_param[i]->tbptr, in_be16(&udc->ep_param[i]->tbase));
+	out_be32(&udc->ep_param[i]->tstate, 0);
+	out_be16(&udc->ep_param[i]->tbcnt, 0);
+
+	ep->c_txbd = ep->txbase;
+	ep->n_txbd = ep->txbase;
+	qe_ep_cmd_restarttx(ep);
+	return 0;
+}
+
+static int qe_ep_filltxfifo(struct qe_ep *ep)
+{
+	struct qe_udc *udc = ep->udc;
+
+	out_8(&udc->usb_regs->usb_uscom,
+			USB_CMD_STR_FIFO | (USB_CMD_EP_MASK & (ep->epnum)));
+	return 0;
+}
+
+static int qe_epbds_reset(struct qe_udc *udc, int pipe_num)
+{
+	struct qe_ep *ep;
+	u32 bdring_len;
+	struct qe_bd __iomem *bd;
+	int i;
+
+	ep = &udc->eps[pipe_num];
+
+	if (ep->dir == USB_DIR_OUT)
+		bdring_len = USB_BDRING_LEN_RX;
+	else
+		bdring_len = USB_BDRING_LEN;
+
+	bd = ep->rxbase;
+	for (i = 0; i < (bdring_len - 1); i++) {
+		out_be32((u32 __iomem *)bd, R_E | R_I);
+		bd++;
+	}
+	out_be32((u32 __iomem *)bd, R_E | R_I | R_W);
+
+	bd = ep->txbase;
+	for (i = 0; i < USB_BDRING_LEN_TX - 1; i++) {
+		out_be32(&bd->buf, 0);
+		out_be32((u32 __iomem *)bd, 0);
+		bd++;
+	}
+	out_be32((u32 __iomem *)bd, T_W);
+
+	return 0;
+}
+
+static int qe_ep_reset(struct qe_udc *udc, int pipe_num)
+{
+	struct qe_ep *ep;
+	u16 tmpusep;
+
+	ep = &udc->eps[pipe_num];
+	tmpusep = in_be16(&udc->usb_regs->usb_usep[pipe_num]);
+	tmpusep &= ~USB_RTHS_MASK;
+
+	switch (ep->dir) {
+	case USB_DIR_BOTH:
+		qe_ep_flushtxfifo(ep);
+		break;
+	case USB_DIR_OUT:
+		tmpusep |= USB_THS_IGNORE_IN;
+		break;
+	case USB_DIR_IN:
+		qe_ep_flushtxfifo(ep);
+		tmpusep |= USB_RHS_IGNORE_OUT;
+		break;
+	default:
+		break;
+	}
+	out_be16(&udc->usb_regs->usb_usep[pipe_num], tmpusep);
+
+	qe_epbds_reset(udc, pipe_num);
+
+	return 0;
+}
+
+static int qe_ep_toggledata01(struct qe_ep *ep)
+{
+	ep->data01 ^= 0x1;
+	return 0;
+}
+
+static int qe_ep_bd_init(struct qe_udc *udc, unsigned char pipe_num)
+{
+	struct qe_ep *ep = &udc->eps[pipe_num];
+	unsigned long tmp_addr = 0;
+	struct usb_ep_para __iomem *epparam;
+	int i;
+	struct qe_bd __iomem *bd;
+	int bdring_len;
+
+	if (ep->dir == USB_DIR_OUT)
+		bdring_len = USB_BDRING_LEN_RX;
+	else
+		bdring_len = USB_BDRING_LEN;
+
+	epparam = udc->ep_param[pipe_num];
+	/* alloc multi-ram for BD rings and set the ep parameters */
+	tmp_addr = cpm_muram_alloc(sizeof(struct qe_bd) * (bdring_len +
+				USB_BDRING_LEN_TX), QE_ALIGNMENT_OF_BD);
+	if (IS_ERR_VALUE(tmp_addr))
+		return -ENOMEM;
+
+	out_be16(&epparam->rbase, (u16)tmp_addr);
+	out_be16(&epparam->tbase, (u16)(tmp_addr +
+				(sizeof(struct qe_bd) * bdring_len)));
+
+	out_be16(&epparam->rbptr, in_be16(&epparam->rbase));
+	out_be16(&epparam->tbptr, in_be16(&epparam->tbase));
+
+	ep->rxbase = cpm_muram_addr(tmp_addr);
+	ep->txbase = cpm_muram_addr(tmp_addr + (sizeof(struct qe_bd)
+				* bdring_len));
+	ep->n_rxbd = ep->rxbase;
+	ep->e_rxbd = ep->rxbase;
+	ep->n_txbd = ep->txbase;
+	ep->c_txbd = ep->txbase;
+	ep->data01 = 0; /* data0 */
+
+	/* Init TX and RX bds */
+	bd = ep->rxbase;
+	for (i = 0; i < bdring_len - 1; i++) {
+		out_be32(&bd->buf, 0);
+		out_be32((u32 __iomem *)bd, 0);
+		bd++;
+	}
+	out_be32(&bd->buf, 0);
+	out_be32((u32 __iomem *)bd, R_W);
+
+	bd = ep->txbase;
+	for (i = 0; i < USB_BDRING_LEN_TX - 1; i++) {
+		out_be32(&bd->buf, 0);
+		out_be32((u32 __iomem *)bd, 0);
+		bd++;
+	}
+	out_be32(&bd->buf, 0);
+	out_be32((u32 __iomem *)bd, T_W);
+
+	return 0;
+}
+
+static int qe_ep_rxbd_update(struct qe_ep *ep)
+{
+	unsigned int size;
+	int i;
+	unsigned int tmp;
+	struct qe_bd __iomem *bd;
+	unsigned int bdring_len;
+
+	if (ep->rxbase == NULL)
+		return -EINVAL;
+
+	bd = ep->rxbase;
+
+	ep->rxframe = kmalloc(sizeof(*ep->rxframe), GFP_ATOMIC);
+	if (!ep->rxframe)
+		return -ENOMEM;
+
+	qe_frame_init(ep->rxframe);
+
+	if (ep->dir == USB_DIR_OUT)
+		bdring_len = USB_BDRING_LEN_RX;
+	else
+		bdring_len = USB_BDRING_LEN;
+
+	size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (bdring_len + 1);
+	ep->rxbuffer = kzalloc(size, GFP_ATOMIC);
+	if (!ep->rxbuffer) {
+		kfree(ep->rxframe);
+		return -ENOMEM;
+	}
+
+	ep->rxbuf_d = virt_to_phys((void *)ep->rxbuffer);
+	if (ep->rxbuf_d == DMA_ADDR_INVALID) {
+		ep->rxbuf_d = dma_map_single(ep->udc->gadget.dev.parent,
+					ep->rxbuffer,
+					size,
+					DMA_FROM_DEVICE);
+		ep->rxbufmap = 1;
+	} else {
+		dma_sync_single_for_device(ep->udc->gadget.dev.parent,
+					ep->rxbuf_d, size,
+					DMA_FROM_DEVICE);
+		ep->rxbufmap = 0;
+	}
+
+	size = ep->ep.maxpacket + USB_CRC_SIZE + 2;
+	tmp = ep->rxbuf_d;
+	tmp = (u32)(((tmp >> 2) << 2) + 4);
+
+	for (i = 0; i < bdring_len - 1; i++) {
+		out_be32(&bd->buf, tmp);
+		out_be32((u32 __iomem *)bd, (R_E | R_I));
+		tmp = tmp + size;
+		bd++;
+	}
+	out_be32(&bd->buf, tmp);
+	out_be32((u32 __iomem *)bd, (R_E | R_I | R_W));
+
+	return 0;
+}
+
+static int qe_ep_register_init(struct qe_udc *udc, unsigned char pipe_num)
+{
+	struct qe_ep *ep = &udc->eps[pipe_num];
+	struct usb_ep_para __iomem *epparam;
+	u16 usep, logepnum;
+	u16 tmp;
+	u8 rtfcr = 0;
+
+	epparam = udc->ep_param[pipe_num];
+
+	usep = 0;
+	logepnum = (ep->ep.desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+	usep |= (logepnum << USB_EPNUM_SHIFT);
+
+	switch (ep->ep.desc->bmAttributes & 0x03) {
+	case USB_ENDPOINT_XFER_BULK:
+		usep |= USB_TRANS_BULK;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		usep |=  USB_TRANS_ISO;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		usep |= USB_TRANS_INT;
+		break;
+	default:
+		usep |= USB_TRANS_CTR;
+		break;
+	}
+
+	switch (ep->dir) {
+	case USB_DIR_OUT:
+		usep |= USB_THS_IGNORE_IN;
+		break;
+	case USB_DIR_IN:
+		usep |= USB_RHS_IGNORE_OUT;
+		break;
+	default:
+		break;
+	}
+	out_be16(&udc->usb_regs->usb_usep[pipe_num], usep);
+
+	rtfcr = 0x30;
+	out_8(&epparam->rbmr, rtfcr);
+	out_8(&epparam->tbmr, rtfcr);
+
+	tmp = (u16)(ep->ep.maxpacket + USB_CRC_SIZE);
+	/* MRBLR must be divisble by 4 */
+	tmp = (u16)(((tmp >> 2) << 2) + 4);
+	out_be16(&epparam->mrblr, tmp);
+
+	return 0;
+}
+
+static int qe_ep_init(struct qe_udc *udc,
+		      unsigned char pipe_num,
+		      const struct usb_endpoint_descriptor *desc)
+{
+	struct qe_ep *ep = &udc->eps[pipe_num];
+	unsigned long flags;
+	int reval = 0;
+	u16 max = 0;
+
+	max = usb_endpoint_maxp(desc);
+
+	/* check the max package size validate for this endpoint */
+	/* Refer to USB2.0 spec table 9-13,
+	*/
+	if (pipe_num != 0) {
+		switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+		case USB_ENDPOINT_XFER_BULK:
+			if (strstr(ep->ep.name, "-iso")
+					|| strstr(ep->ep.name, "-int"))
+				goto en_done;
+			switch (udc->gadget.speed) {
+			case USB_SPEED_HIGH:
+			if ((max == 128) || (max == 256) || (max == 512))
+				break;
+			fallthrough;
+			default:
+				switch (max) {
+				case 4:
+				case 8:
+				case 16:
+				case 32:
+				case 64:
+					break;
+				default:
+				case USB_SPEED_LOW:
+					goto en_done;
+				}
+			}
+			break;
+		case USB_ENDPOINT_XFER_INT:
+			if (strstr(ep->ep.name, "-iso"))	/* bulk is ok */
+				goto en_done;
+			switch (udc->gadget.speed) {
+			case USB_SPEED_HIGH:
+				if (max <= 1024)
+					break;
+				fallthrough;
+			case USB_SPEED_FULL:
+				if (max <= 64)
+					break;
+				fallthrough;
+			default:
+				if (max <= 8)
+					break;
+				goto en_done;
+			}
+			break;
+		case USB_ENDPOINT_XFER_ISOC:
+			if (strstr(ep->ep.name, "-bulk")
+				|| strstr(ep->ep.name, "-int"))
+				goto en_done;
+			switch (udc->gadget.speed) {
+			case USB_SPEED_HIGH:
+				if (max <= 1024)
+					break;
+				fallthrough;
+			case USB_SPEED_FULL:
+				if (max <= 1023)
+					break;
+				fallthrough;
+			default:
+				goto en_done;
+			}
+			break;
+		case USB_ENDPOINT_XFER_CONTROL:
+			if (strstr(ep->ep.name, "-iso")
+				|| strstr(ep->ep.name, "-int"))
+				goto en_done;
+			switch (udc->gadget.speed) {
+			case USB_SPEED_HIGH:
+			case USB_SPEED_FULL:
+				switch (max) {
+				case 1:
+				case 2:
+				case 4:
+				case 8:
+				case 16:
+				case 32:
+				case 64:
+					break;
+				default:
+					goto en_done;
+				}
+				fallthrough;
+			case USB_SPEED_LOW:
+				switch (max) {
+				case 1:
+				case 2:
+				case 4:
+				case 8:
+					break;
+				default:
+					goto en_done;
+				}
+			default:
+				goto en_done;
+			}
+			break;
+
+		default:
+			goto en_done;
+		}
+	} /* if ep0*/
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* initialize ep structure */
+	ep->ep.maxpacket = max;
+	ep->tm = (u8)(desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
+	ep->ep.desc = desc;
+	ep->stopped = 0;
+	ep->init = 1;
+
+	if (pipe_num == 0) {
+		ep->dir = USB_DIR_BOTH;
+		udc->ep0_dir = USB_DIR_OUT;
+		udc->ep0_state = WAIT_FOR_SETUP;
+	} else	{
+		switch (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) {
+		case USB_DIR_OUT:
+			ep->dir = USB_DIR_OUT;
+			break;
+		case USB_DIR_IN:
+			ep->dir = USB_DIR_IN;
+		default:
+			break;
+		}
+	}
+
+	/* hardware special operation */
+	qe_ep_bd_init(udc, pipe_num);
+	if ((ep->tm == USBP_TM_CTL) || (ep->dir == USB_DIR_OUT)) {
+		reval = qe_ep_rxbd_update(ep);
+		if (reval)
+			goto en_done1;
+	}
+
+	if ((ep->tm == USBP_TM_CTL) || (ep->dir == USB_DIR_IN)) {
+		ep->txframe = kmalloc(sizeof(*ep->txframe), GFP_ATOMIC);
+		if (!ep->txframe)
+			goto en_done2;
+		qe_frame_init(ep->txframe);
+	}
+
+	qe_ep_register_init(udc, pipe_num);
+
+	/* Now HW will be NAKing transfers to that EP,
+	 * until a buffer is queued to it. */
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+en_done2:
+	kfree(ep->rxbuffer);
+	kfree(ep->rxframe);
+en_done1:
+	spin_unlock_irqrestore(&udc->lock, flags);
+en_done:
+	dev_err(udc->dev, "failed to initialize %s\n", ep->ep.name);
+	return -ENODEV;
+}
+
+static inline void qe_usb_enable(struct qe_udc *udc)
+{
+	setbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN);
+}
+
+static inline void qe_usb_disable(struct qe_udc *udc)
+{
+	clrbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN);
+}
+
+/*----------------------------------------------------------------------------*
+ *		USB and EP basic manipulate function end		      *
+ *----------------------------------------------------------------------------*/
+
+
+/******************************************************************************
+		UDC transmit and receive process
+ ******************************************************************************/
+static void recycle_one_rxbd(struct qe_ep *ep)
+{
+	u32 bdstatus;
+
+	bdstatus = in_be32((u32 __iomem *)ep->e_rxbd);
+	bdstatus = R_I | R_E | (bdstatus & R_W);
+	out_be32((u32 __iomem *)ep->e_rxbd, bdstatus);
+
+	if (bdstatus & R_W)
+		ep->e_rxbd = ep->rxbase;
+	else
+		ep->e_rxbd++;
+}
+
+static void recycle_rxbds(struct qe_ep *ep, unsigned char stopatnext)
+{
+	u32 bdstatus;
+	struct qe_bd __iomem *bd, *nextbd;
+	unsigned char stop = 0;
+
+	nextbd = ep->n_rxbd;
+	bd = ep->e_rxbd;
+	bdstatus = in_be32((u32 __iomem *)bd);
+
+	while (!(bdstatus & R_E) && !(bdstatus & BD_LENGTH_MASK) && !stop) {
+		bdstatus = R_E | R_I | (bdstatus & R_W);
+		out_be32((u32 __iomem *)bd, bdstatus);
+
+		if (bdstatus & R_W)
+			bd = ep->rxbase;
+		else
+			bd++;
+
+		bdstatus = in_be32((u32 __iomem *)bd);
+		if (stopatnext && (bd == nextbd))
+			stop = 1;
+	}
+
+	ep->e_rxbd = bd;
+}
+
+static void ep_recycle_rxbds(struct qe_ep *ep)
+{
+	struct qe_bd __iomem *bd = ep->n_rxbd;
+	u32 bdstatus;
+	u8 epnum = ep->epnum;
+	struct qe_udc *udc = ep->udc;
+
+	bdstatus = in_be32((u32 __iomem *)bd);
+	if (!(bdstatus & R_E) && !(bdstatus & BD_LENGTH_MASK)) {
+		bd = ep->rxbase +
+				((in_be16(&udc->ep_param[epnum]->rbptr) -
+				  in_be16(&udc->ep_param[epnum]->rbase))
+				 >> 3);
+		bdstatus = in_be32((u32 __iomem *)bd);
+
+		if (bdstatus & R_W)
+			bd = ep->rxbase;
+		else
+			bd++;
+
+		ep->e_rxbd = bd;
+		recycle_rxbds(ep, 0);
+		ep->e_rxbd = ep->n_rxbd;
+	} else
+		recycle_rxbds(ep, 1);
+
+	if (in_be16(&udc->usb_regs->usb_usber) & USB_E_BSY_MASK)
+		out_be16(&udc->usb_regs->usb_usber, USB_E_BSY_MASK);
+
+	if (ep->has_data <= 0 && (!list_empty(&ep->queue)))
+		qe_eprx_normal(ep);
+
+	ep->localnack = 0;
+}
+
+static void setup_received_handle(struct qe_udc *udc,
+					struct usb_ctrlrequest *setup);
+static int qe_ep_rxframe_handle(struct qe_ep *ep);
+static void ep0_req_complete(struct qe_udc *udc, struct qe_req *req);
+/* when BD PID is setup, handle the packet */
+static int ep0_setup_handle(struct qe_udc *udc)
+{
+	struct qe_ep *ep = &udc->eps[0];
+	struct qe_frame *pframe;
+	unsigned int fsize;
+	u8 *cp;
+
+	pframe = ep->rxframe;
+	if ((frame_get_info(pframe) & PID_SETUP)
+			&& (udc->ep0_state == WAIT_FOR_SETUP)) {
+		fsize = frame_get_length(pframe);
+		if (unlikely(fsize != 8))
+			return -EINVAL;
+		cp = (u8 *)&udc->local_setup_buff;
+		memcpy(cp, pframe->data, fsize);
+		ep->data01 = 1;
+
+		/* handle the usb command base on the usb_ctrlrequest */
+		setup_received_handle(udc, &udc->local_setup_buff);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int qe_ep0_rx(struct qe_udc *udc)
+{
+	struct qe_ep *ep = &udc->eps[0];
+	struct qe_frame *pframe;
+	struct qe_bd __iomem *bd;
+	u32 bdstatus, length;
+	u32 vaddr;
+
+	pframe = ep->rxframe;
+
+	if (ep->dir == USB_DIR_IN) {
+		dev_err(udc->dev, "ep0 not a control endpoint\n");
+		return -EINVAL;
+	}
+
+	bd = ep->n_rxbd;
+	bdstatus = in_be32((u32 __iomem *)bd);
+	length = bdstatus & BD_LENGTH_MASK;
+
+	while (!(bdstatus & R_E) && length) {
+		if ((bdstatus & R_F) && (bdstatus & R_L)
+			&& !(bdstatus & R_ERROR)) {
+			if (length == USB_CRC_SIZE) {
+				udc->ep0_state = WAIT_FOR_SETUP;
+				dev_vdbg(udc->dev,
+					"receive a ZLP in status phase\n");
+			} else {
+				qe_frame_clean(pframe);
+				vaddr = (u32)phys_to_virt(in_be32(&bd->buf));
+				frame_set_data(pframe, (u8 *)vaddr);
+				frame_set_length(pframe,
+						(length - USB_CRC_SIZE));
+				frame_set_status(pframe, FRAME_OK);
+				switch (bdstatus & R_PID) {
+				case R_PID_SETUP:
+					frame_set_info(pframe, PID_SETUP);
+					break;
+				case R_PID_DATA1:
+					frame_set_info(pframe, PID_DATA1);
+					break;
+				default:
+					frame_set_info(pframe, PID_DATA0);
+					break;
+				}
+
+				if ((bdstatus & R_PID) == R_PID_SETUP)
+					ep0_setup_handle(udc);
+				else
+					qe_ep_rxframe_handle(ep);
+			}
+		} else {
+			dev_err(udc->dev, "The receive frame with error!\n");
+		}
+
+		/* note: don't clear the rxbd's buffer address */
+		recycle_one_rxbd(ep);
+
+		/* Get next BD */
+		if (bdstatus & R_W)
+			bd = ep->rxbase;
+		else
+			bd++;
+
+		bdstatus = in_be32((u32 __iomem *)bd);
+		length = bdstatus & BD_LENGTH_MASK;
+
+	}
+
+	ep->n_rxbd = bd;
+
+	return 0;
+}
+
+static int qe_ep_rxframe_handle(struct qe_ep *ep)
+{
+	struct qe_frame *pframe;
+	u8 framepid = 0;
+	unsigned int fsize;
+	u8 *cp;
+	struct qe_req *req;
+
+	pframe = ep->rxframe;
+
+	if (frame_get_info(pframe) & PID_DATA1)
+		framepid = 0x1;
+
+	if (framepid != ep->data01) {
+		dev_err(ep->udc->dev, "the data01 error!\n");
+		return -EIO;
+	}
+
+	fsize = frame_get_length(pframe);
+	if (list_empty(&ep->queue)) {
+		dev_err(ep->udc->dev, "the %s have no requeue!\n", ep->name);
+	} else {
+		req = list_entry(ep->queue.next, struct qe_req, queue);
+
+		cp = (u8 *)(req->req.buf) + req->req.actual;
+		if (cp) {
+			memcpy(cp, pframe->data, fsize);
+			req->req.actual += fsize;
+			if ((fsize < ep->ep.maxpacket) ||
+					(req->req.actual >= req->req.length)) {
+				if (ep->epnum == 0)
+					ep0_req_complete(ep->udc, req);
+				else
+					done(ep, req, 0);
+				if (list_empty(&ep->queue) && ep->epnum != 0)
+					qe_eprx_nack(ep);
+			}
+		}
+	}
+
+	qe_ep_toggledata01(ep);
+
+	return 0;
+}
+
+static void ep_rx_tasklet(struct tasklet_struct *t)
+{
+	struct qe_udc *udc = from_tasklet(udc, t, rx_tasklet);
+	struct qe_ep *ep;
+	struct qe_frame *pframe;
+	struct qe_bd __iomem *bd;
+	unsigned long flags;
+	u32 bdstatus, length;
+	u32 vaddr, i;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	for (i = 1; i < USB_MAX_ENDPOINTS; i++) {
+		ep = &udc->eps[i];
+
+		if (ep->dir == USB_DIR_IN || ep->enable_tasklet == 0) {
+			dev_dbg(udc->dev,
+				"This is a transmit ep or disable tasklet!\n");
+			continue;
+		}
+
+		pframe = ep->rxframe;
+		bd = ep->n_rxbd;
+		bdstatus = in_be32((u32 __iomem *)bd);
+		length = bdstatus & BD_LENGTH_MASK;
+
+		while (!(bdstatus & R_E) && length) {
+			if (list_empty(&ep->queue)) {
+				qe_eprx_nack(ep);
+				dev_dbg(udc->dev,
+					"The rxep have noreq %d\n",
+					ep->has_data);
+				break;
+			}
+
+			if ((bdstatus & R_F) && (bdstatus & R_L)
+				&& !(bdstatus & R_ERROR)) {
+				qe_frame_clean(pframe);
+				vaddr = (u32)phys_to_virt(in_be32(&bd->buf));
+				frame_set_data(pframe, (u8 *)vaddr);
+				frame_set_length(pframe,
+						(length - USB_CRC_SIZE));
+				frame_set_status(pframe, FRAME_OK);
+				switch (bdstatus & R_PID) {
+				case R_PID_DATA1:
+					frame_set_info(pframe, PID_DATA1);
+					break;
+				case R_PID_SETUP:
+					frame_set_info(pframe, PID_SETUP);
+					break;
+				default:
+					frame_set_info(pframe, PID_DATA0);
+					break;
+				}
+				/* handle the rx frame */
+				qe_ep_rxframe_handle(ep);
+			} else {
+				dev_err(udc->dev,
+					"error in received frame\n");
+			}
+			/* note: don't clear the rxbd's buffer address */
+			/*clear the length */
+			out_be32((u32 __iomem *)bd, bdstatus & BD_STATUS_MASK);
+			ep->has_data--;
+			if (!(ep->localnack))
+				recycle_one_rxbd(ep);
+
+			/* Get next BD */
+			if (bdstatus & R_W)
+				bd = ep->rxbase;
+			else
+				bd++;
+
+			bdstatus = in_be32((u32 __iomem *)bd);
+			length = bdstatus & BD_LENGTH_MASK;
+		}
+
+		ep->n_rxbd = bd;
+
+		if (ep->localnack)
+			ep_recycle_rxbds(ep);
+
+		ep->enable_tasklet = 0;
+	} /* for i=1 */
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+static int qe_ep_rx(struct qe_ep *ep)
+{
+	struct qe_udc *udc;
+	struct qe_frame *pframe;
+	struct qe_bd __iomem *bd;
+	u16 swoffs, ucoffs, emptybds;
+
+	udc = ep->udc;
+	pframe = ep->rxframe;
+
+	if (ep->dir == USB_DIR_IN) {
+		dev_err(udc->dev, "transmit ep in rx function\n");
+		return -EINVAL;
+	}
+
+	bd = ep->n_rxbd;
+
+	swoffs = (u16)(bd - ep->rxbase);
+	ucoffs = (u16)((in_be16(&udc->ep_param[ep->epnum]->rbptr) -
+			in_be16(&udc->ep_param[ep->epnum]->rbase)) >> 3);
+	if (swoffs < ucoffs)
+		emptybds = USB_BDRING_LEN_RX - ucoffs + swoffs;
+	else
+		emptybds = swoffs - ucoffs;
+
+	if (emptybds < MIN_EMPTY_BDS) {
+		qe_eprx_nack(ep);
+		ep->localnack = 1;
+		dev_vdbg(udc->dev, "%d empty bds, send NACK\n", emptybds);
+	}
+	ep->has_data = USB_BDRING_LEN_RX - emptybds;
+
+	if (list_empty(&ep->queue)) {
+		qe_eprx_nack(ep);
+		dev_vdbg(udc->dev, "The rxep have no req queued with %d BDs\n",
+				ep->has_data);
+		return 0;
+	}
+
+	tasklet_schedule(&udc->rx_tasklet);
+	ep->enable_tasklet = 1;
+
+	return 0;
+}
+
+/* send data from a frame, no matter what tx_req */
+static int qe_ep_tx(struct qe_ep *ep, struct qe_frame *frame)
+{
+	struct qe_udc *udc = ep->udc;
+	struct qe_bd __iomem *bd;
+	u16 saveusbmr;
+	u32 bdstatus, pidmask;
+	u32 paddr;
+
+	if (ep->dir == USB_DIR_OUT) {
+		dev_err(udc->dev, "receive ep passed to tx function\n");
+		return -EINVAL;
+	}
+
+	/* Disable the Tx interrupt */
+	saveusbmr = in_be16(&udc->usb_regs->usb_usbmr);
+	out_be16(&udc->usb_regs->usb_usbmr,
+			saveusbmr & ~(USB_E_TXB_MASK | USB_E_TXE_MASK));
+
+	bd = ep->n_txbd;
+	bdstatus = in_be32((u32 __iomem *)bd);
+
+	if (!(bdstatus & (T_R | BD_LENGTH_MASK))) {
+		if (frame_get_length(frame) == 0) {
+			frame_set_data(frame, udc->nullbuf);
+			frame_set_length(frame, 2);
+			frame->info |= (ZLP | NO_CRC);
+			dev_vdbg(udc->dev, "the frame size = 0\n");
+		}
+		paddr = virt_to_phys((void *)frame->data);
+		out_be32(&bd->buf, paddr);
+		bdstatus = (bdstatus&T_W);
+		if (!(frame_get_info(frame) & NO_CRC))
+			bdstatus |= T_R | T_I | T_L | T_TC
+					| frame_get_length(frame);
+		else
+			bdstatus |= T_R | T_I | T_L | frame_get_length(frame);
+
+		/* if the packet is a ZLP in status phase */
+		if ((ep->epnum == 0) && (udc->ep0_state == DATA_STATE_NEED_ZLP))
+			ep->data01 = 0x1;
+
+		if (ep->data01) {
+			pidmask = T_PID_DATA1;
+			frame->info |= PID_DATA1;
+		} else {
+			pidmask = T_PID_DATA0;
+			frame->info |= PID_DATA0;
+		}
+		bdstatus |= T_CNF;
+		bdstatus |= pidmask;
+		out_be32((u32 __iomem *)bd, bdstatus);
+		qe_ep_filltxfifo(ep);
+
+		/* enable the TX interrupt */
+		out_be16(&udc->usb_regs->usb_usbmr, saveusbmr);
+
+		qe_ep_toggledata01(ep);
+		if (bdstatus & T_W)
+			ep->n_txbd = ep->txbase;
+		else
+			ep->n_txbd++;
+
+		return 0;
+	} else {
+		out_be16(&udc->usb_regs->usb_usbmr, saveusbmr);
+		dev_vdbg(udc->dev, "The tx bd is not ready!\n");
+		return -EBUSY;
+	}
+}
+
+/* when a bd was transmitted, the function can
+ * handle the tx_req, not include ep0           */
+static int txcomplete(struct qe_ep *ep, unsigned char restart)
+{
+	if (ep->tx_req != NULL) {
+		struct qe_req *req = ep->tx_req;
+		unsigned zlp = 0, last_len = 0;
+
+		last_len = min_t(unsigned, req->req.length - ep->sent,
+				ep->ep.maxpacket);
+
+		if (!restart) {
+			int asent = ep->last;
+			ep->sent += asent;
+			ep->last -= asent;
+		} else {
+			ep->last = 0;
+		}
+
+		/* zlp needed when req->re.zero is set */
+		if (req->req.zero) {
+			if (last_len == 0 ||
+				(req->req.length % ep->ep.maxpacket) != 0)
+				zlp = 0;
+			else
+				zlp = 1;
+		} else
+			zlp = 0;
+
+		/* a request already were transmitted completely */
+		if (((ep->tx_req->req.length - ep->sent) <= 0) && !zlp) {
+			done(ep, ep->tx_req, 0);
+			ep->tx_req = NULL;
+			ep->last = 0;
+			ep->sent = 0;
+		}
+	}
+
+	/* we should gain a new tx_req fot this endpoint */
+	if (ep->tx_req == NULL) {
+		if (!list_empty(&ep->queue)) {
+			ep->tx_req = list_entry(ep->queue.next,	struct qe_req,
+							queue);
+			ep->last = 0;
+			ep->sent = 0;
+		}
+	}
+
+	return 0;
+}
+
+/* give a frame and a tx_req, send some data */
+static int qe_usb_senddata(struct qe_ep *ep, struct qe_frame *frame)
+{
+	unsigned int size;
+	u8 *buf;
+
+	qe_frame_clean(frame);
+	size = min_t(u32, (ep->tx_req->req.length - ep->sent),
+				ep->ep.maxpacket);
+	buf = (u8 *)ep->tx_req->req.buf + ep->sent;
+	if (buf && size) {
+		ep->last = size;
+		ep->tx_req->req.actual += size;
+		frame_set_data(frame, buf);
+		frame_set_length(frame, size);
+		frame_set_status(frame, FRAME_OK);
+		frame_set_info(frame, 0);
+		return qe_ep_tx(ep, frame);
+	}
+	return -EIO;
+}
+
+/* give a frame struct,send a ZLP */
+static int sendnulldata(struct qe_ep *ep, struct qe_frame *frame, uint infor)
+{
+	struct qe_udc *udc = ep->udc;
+
+	if (frame == NULL)
+		return -ENODEV;
+
+	qe_frame_clean(frame);
+	frame_set_data(frame, (u8 *)udc->nullbuf);
+	frame_set_length(frame, 2);
+	frame_set_status(frame, FRAME_OK);
+	frame_set_info(frame, (ZLP | NO_CRC | infor));
+
+	return qe_ep_tx(ep, frame);
+}
+
+static int frame_create_tx(struct qe_ep *ep, struct qe_frame *frame)
+{
+	struct qe_req *req = ep->tx_req;
+	int reval;
+
+	if (req == NULL)
+		return -ENODEV;
+
+	if ((req->req.length - ep->sent) > 0)
+		reval = qe_usb_senddata(ep, frame);
+	else
+		reval = sendnulldata(ep, frame, 0);
+
+	return reval;
+}
+
+/* if direction is DIR_IN, the status is Device->Host
+ * if direction is DIR_OUT, the status transaction is Device<-Host
+ * in status phase, udc create a request and gain status */
+static int ep0_prime_status(struct qe_udc *udc, int direction)
+{
+
+	struct qe_ep *ep = &udc->eps[0];
+
+	if (direction == USB_DIR_IN) {
+		udc->ep0_state = DATA_STATE_NEED_ZLP;
+		udc->ep0_dir = USB_DIR_IN;
+		sendnulldata(ep, ep->txframe, SETUP_STATUS | NO_REQ);
+	} else {
+		udc->ep0_dir = USB_DIR_OUT;
+		udc->ep0_state = WAIT_FOR_OUT_STATUS;
+	}
+
+	return 0;
+}
+
+/* a request complete in ep0, whether gadget request or udc request */
+static void ep0_req_complete(struct qe_udc *udc, struct qe_req *req)
+{
+	struct qe_ep *ep = &udc->eps[0];
+	/* because usb and ep's status already been set in ch9setaddress() */
+
+	switch (udc->ep0_state) {
+	case DATA_STATE_XMIT:
+		done(ep, req, 0);
+		/* receive status phase */
+		if (ep0_prime_status(udc, USB_DIR_OUT))
+			qe_ep0_stall(udc);
+		break;
+
+	case DATA_STATE_NEED_ZLP:
+		done(ep, req, 0);
+		udc->ep0_state = WAIT_FOR_SETUP;
+		break;
+
+	case DATA_STATE_RECV:
+		done(ep, req, 0);
+		/* send status phase */
+		if (ep0_prime_status(udc, USB_DIR_IN))
+			qe_ep0_stall(udc);
+		break;
+
+	case WAIT_FOR_OUT_STATUS:
+		done(ep, req, 0);
+		udc->ep0_state = WAIT_FOR_SETUP;
+		break;
+
+	case WAIT_FOR_SETUP:
+		dev_vdbg(udc->dev, "Unexpected interrupt\n");
+		break;
+
+	default:
+		qe_ep0_stall(udc);
+		break;
+	}
+}
+
+static int ep0_txcomplete(struct qe_ep *ep, unsigned char restart)
+{
+	struct qe_req *tx_req = NULL;
+	struct qe_frame *frame = ep->txframe;
+
+	if ((frame_get_info(frame) & (ZLP | NO_REQ)) == (ZLP | NO_REQ)) {
+		if (!restart)
+			ep->udc->ep0_state = WAIT_FOR_SETUP;
+		else
+			sendnulldata(ep, ep->txframe, SETUP_STATUS | NO_REQ);
+		return 0;
+	}
+
+	tx_req = ep->tx_req;
+	if (tx_req != NULL) {
+		if (!restart) {
+			int asent = ep->last;
+			ep->sent += asent;
+			ep->last -= asent;
+		} else {
+			ep->last = 0;
+		}
+
+		/* a request already were transmitted completely */
+		if ((ep->tx_req->req.length - ep->sent) <= 0) {
+			ep->tx_req->req.actual = (unsigned int)ep->sent;
+			ep0_req_complete(ep->udc, ep->tx_req);
+			ep->tx_req = NULL;
+			ep->last = 0;
+			ep->sent = 0;
+		}
+	} else {
+		dev_vdbg(ep->udc->dev, "the ep0_controller have no req\n");
+	}
+
+	return 0;
+}
+
+static int ep0_txframe_handle(struct qe_ep *ep)
+{
+	/* if have error, transmit again */
+	if (frame_get_status(ep->txframe) & FRAME_ERROR) {
+		qe_ep_flushtxfifo(ep);
+		dev_vdbg(ep->udc->dev, "The EP0 transmit data have error!\n");
+		if (frame_get_info(ep->txframe) & PID_DATA0)
+			ep->data01 = 0;
+		else
+			ep->data01 = 1;
+
+		ep0_txcomplete(ep, 1);
+	} else
+		ep0_txcomplete(ep, 0);
+
+	frame_create_tx(ep, ep->txframe);
+	return 0;
+}
+
+static int qe_ep0_txconf(struct qe_ep *ep)
+{
+	struct qe_bd __iomem *bd;
+	struct qe_frame *pframe;
+	u32 bdstatus;
+
+	bd = ep->c_txbd;
+	bdstatus = in_be32((u32 __iomem *)bd);
+	while (!(bdstatus & T_R) && (bdstatus & ~T_W)) {
+		pframe = ep->txframe;
+
+		/* clear and recycle the BD */
+		out_be32((u32 __iomem *)bd, bdstatus & T_W);
+		out_be32(&bd->buf, 0);
+		if (bdstatus & T_W)
+			ep->c_txbd = ep->txbase;
+		else
+			ep->c_txbd++;
+
+		if (ep->c_txbd == ep->n_txbd) {
+			if (bdstatus & DEVICE_T_ERROR) {
+				frame_set_status(pframe, FRAME_ERROR);
+				if (bdstatus & T_TO)
+					pframe->status |= TX_ER_TIMEOUT;
+				if (bdstatus & T_UN)
+					pframe->status |= TX_ER_UNDERUN;
+			}
+			ep0_txframe_handle(ep);
+		}
+
+		bd = ep->c_txbd;
+		bdstatus = in_be32((u32 __iomem *)bd);
+	}
+
+	return 0;
+}
+
+static int ep_txframe_handle(struct qe_ep *ep)
+{
+	if (frame_get_status(ep->txframe) & FRAME_ERROR) {
+		qe_ep_flushtxfifo(ep);
+		dev_vdbg(ep->udc->dev, "The EP0 transmit data have error!\n");
+		if (frame_get_info(ep->txframe) & PID_DATA0)
+			ep->data01 = 0;
+		else
+			ep->data01 = 1;
+
+		txcomplete(ep, 1);
+	} else
+		txcomplete(ep, 0);
+
+	frame_create_tx(ep, ep->txframe); /* send the data */
+	return 0;
+}
+
+/* confirm the already trainsmited bd */
+static int qe_ep_txconf(struct qe_ep *ep)
+{
+	struct qe_bd __iomem *bd;
+	struct qe_frame *pframe = NULL;
+	u32 bdstatus;
+	unsigned char breakonrxinterrupt = 0;
+
+	bd = ep->c_txbd;
+	bdstatus = in_be32((u32 __iomem *)bd);
+	while (!(bdstatus & T_R) && (bdstatus & ~T_W)) {
+		pframe = ep->txframe;
+		if (bdstatus & DEVICE_T_ERROR) {
+			frame_set_status(pframe, FRAME_ERROR);
+			if (bdstatus & T_TO)
+				pframe->status |= TX_ER_TIMEOUT;
+			if (bdstatus & T_UN)
+				pframe->status |= TX_ER_UNDERUN;
+		}
+
+		/* clear and recycle the BD */
+		out_be32((u32 __iomem *)bd, bdstatus & T_W);
+		out_be32(&bd->buf, 0);
+		if (bdstatus & T_W)
+			ep->c_txbd = ep->txbase;
+		else
+			ep->c_txbd++;
+
+		/* handle the tx frame */
+		ep_txframe_handle(ep);
+		bd = ep->c_txbd;
+		bdstatus = in_be32((u32 __iomem *)bd);
+	}
+	if (breakonrxinterrupt)
+		return -EIO;
+	else
+		return 0;
+}
+
+/* Add a request in queue, and try to transmit a packet */
+static int ep_req_send(struct qe_ep *ep, struct qe_req *req)
+{
+	int reval = 0;
+
+	if (ep->tx_req == NULL) {
+		ep->sent = 0;
+		ep->last = 0;
+		txcomplete(ep, 0); /* can gain a new tx_req */
+		reval = frame_create_tx(ep, ep->txframe);
+	}
+	return reval;
+}
+
+/* Maybe this is a good ideal */
+static int ep_req_rx(struct qe_ep *ep, struct qe_req *req)
+{
+	struct qe_udc *udc = ep->udc;
+	struct qe_frame *pframe = NULL;
+	struct qe_bd __iomem *bd;
+	u32 bdstatus, length;
+	u32 vaddr, fsize;
+	u8 *cp;
+	u8 finish_req = 0;
+	u8 framepid;
+
+	if (list_empty(&ep->queue)) {
+		dev_vdbg(udc->dev, "the req already finish!\n");
+		return 0;
+	}
+	pframe = ep->rxframe;
+
+	bd = ep->n_rxbd;
+	bdstatus = in_be32((u32 __iomem *)bd);
+	length = bdstatus & BD_LENGTH_MASK;
+
+	while (!(bdstatus & R_E) && length) {
+		if (finish_req)
+			break;
+		if ((bdstatus & R_F) && (bdstatus & R_L)
+					&& !(bdstatus & R_ERROR)) {
+			qe_frame_clean(pframe);
+			vaddr = (u32)phys_to_virt(in_be32(&bd->buf));
+			frame_set_data(pframe, (u8 *)vaddr);
+			frame_set_length(pframe, (length - USB_CRC_SIZE));
+			frame_set_status(pframe, FRAME_OK);
+			switch (bdstatus & R_PID) {
+			case R_PID_DATA1:
+				frame_set_info(pframe, PID_DATA1); break;
+			default:
+				frame_set_info(pframe, PID_DATA0); break;
+			}
+			/* handle the rx frame */
+
+			if (frame_get_info(pframe) & PID_DATA1)
+				framepid = 0x1;
+			else
+				framepid = 0;
+
+			if (framepid != ep->data01) {
+				dev_vdbg(udc->dev, "the data01 error!\n");
+			} else {
+				fsize = frame_get_length(pframe);
+
+				cp = (u8 *)(req->req.buf) + req->req.actual;
+				if (cp) {
+					memcpy(cp, pframe->data, fsize);
+					req->req.actual += fsize;
+					if ((fsize < ep->ep.maxpacket)
+						|| (req->req.actual >=
+							req->req.length)) {
+						finish_req = 1;
+						done(ep, req, 0);
+						if (list_empty(&ep->queue))
+							qe_eprx_nack(ep);
+					}
+				}
+				qe_ep_toggledata01(ep);
+			}
+		} else {
+			dev_err(udc->dev, "The receive frame with error!\n");
+		}
+
+		/* note: don't clear the rxbd's buffer address *
+		 * only Clear the length */
+		out_be32((u32 __iomem *)bd, (bdstatus & BD_STATUS_MASK));
+		ep->has_data--;
+
+		/* Get next BD */
+		if (bdstatus & R_W)
+			bd = ep->rxbase;
+		else
+			bd++;
+
+		bdstatus = in_be32((u32 __iomem *)bd);
+		length = bdstatus & BD_LENGTH_MASK;
+	}
+
+	ep->n_rxbd = bd;
+	ep_recycle_rxbds(ep);
+
+	return 0;
+}
+
+/* only add the request in queue */
+static int ep_req_receive(struct qe_ep *ep, struct qe_req *req)
+{
+	if (ep->state == EP_STATE_NACK) {
+		if (ep->has_data <= 0) {
+			/* Enable rx and unmask rx interrupt */
+			qe_eprx_normal(ep);
+		} else {
+			/* Copy the exist BD data */
+			ep_req_rx(ep, req);
+		}
+	}
+
+	return 0;
+}
+
+/********************************************************************
+	Internal Used Function End
+********************************************************************/
+
+/*-----------------------------------------------------------------------
+	Endpoint Management Functions For Gadget
+ -----------------------------------------------------------------------*/
+static int qe_ep_enable(struct usb_ep *_ep,
+			 const struct usb_endpoint_descriptor *desc)
+{
+	struct qe_udc *udc;
+	struct qe_ep *ep;
+	int retval = 0;
+	unsigned char epnum;
+
+	ep = container_of(_ep, struct qe_ep, ep);
+
+	/* catch various bogus parameters */
+	if (!_ep || !desc || _ep->name == ep_name[0] ||
+			(desc->bDescriptorType != USB_DT_ENDPOINT))
+		return -EINVAL;
+
+	udc = ep->udc;
+	if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+
+	epnum = (u8)desc->bEndpointAddress & 0xF;
+
+	retval = qe_ep_init(udc, epnum, desc);
+	if (retval != 0) {
+		cpm_muram_free(cpm_muram_offset(ep->rxbase));
+		dev_dbg(udc->dev, "enable ep%d failed\n", ep->epnum);
+		return -EINVAL;
+	}
+	dev_dbg(udc->dev, "enable ep%d successful\n", ep->epnum);
+	return 0;
+}
+
+static int qe_ep_disable(struct usb_ep *_ep)
+{
+	struct qe_udc *udc;
+	struct qe_ep *ep;
+	unsigned long flags;
+	unsigned int size;
+
+	ep = container_of(_ep, struct qe_ep, ep);
+	udc = ep->udc;
+
+	if (!_ep || !ep->ep.desc) {
+		dev_dbg(udc->dev, "%s not enabled\n", _ep ? ep->ep.name : NULL);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	/* Nuke all pending requests (does flush) */
+	nuke(ep, -ESHUTDOWN);
+	ep->ep.desc = NULL;
+	ep->stopped = 1;
+	ep->tx_req = NULL;
+	qe_ep_reset(udc, ep->epnum);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	cpm_muram_free(cpm_muram_offset(ep->rxbase));
+
+	if (ep->dir == USB_DIR_OUT)
+		size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) *
+				(USB_BDRING_LEN_RX + 1);
+	else
+		size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) *
+				(USB_BDRING_LEN + 1);
+
+	if (ep->dir != USB_DIR_IN) {
+		kfree(ep->rxframe);
+		if (ep->rxbufmap) {
+			dma_unmap_single(udc->gadget.dev.parent,
+					ep->rxbuf_d, size,
+					DMA_FROM_DEVICE);
+			ep->rxbuf_d = DMA_ADDR_INVALID;
+		} else {
+			dma_sync_single_for_cpu(
+					udc->gadget.dev.parent,
+					ep->rxbuf_d, size,
+					DMA_FROM_DEVICE);
+		}
+		kfree(ep->rxbuffer);
+	}
+
+	if (ep->dir != USB_DIR_OUT)
+		kfree(ep->txframe);
+
+	dev_dbg(udc->dev, "disabled %s OK\n", _ep->name);
+	return 0;
+}
+
+static struct usb_request *qe_alloc_request(struct usb_ep *_ep,	gfp_t gfp_flags)
+{
+	struct qe_req *req;
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	req->req.dma = DMA_ADDR_INVALID;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void qe_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct qe_req *req;
+
+	req = container_of(_req, struct qe_req, req);
+
+	if (_req)
+		kfree(req);
+}
+
+static int __qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct qe_ep *ep = container_of(_ep, struct qe_ep, ep);
+	struct qe_req *req = container_of(_req, struct qe_req, req);
+	struct qe_udc *udc;
+	int reval;
+
+	udc = ep->udc;
+	/* catch various bogus parameters */
+	if (!_req || !req->req.complete || !req->req.buf
+			|| !list_empty(&req->queue)) {
+		dev_dbg(udc->dev, "bad params\n");
+		return -EINVAL;
+	}
+	if (!_ep || (!ep->ep.desc && ep_index(ep))) {
+		dev_dbg(udc->dev, "bad ep\n");
+		return -EINVAL;
+	}
+
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	req->ep = ep;
+
+	/* map virtual address to hardware */
+	if (req->req.dma == DMA_ADDR_INVALID) {
+		req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
+					req->req.buf,
+					req->req.length,
+					ep_is_in(ep)
+					? DMA_TO_DEVICE :
+					DMA_FROM_DEVICE);
+		req->mapped = 1;
+	} else {
+		dma_sync_single_for_device(ep->udc->gadget.dev.parent,
+					req->req.dma, req->req.length,
+					ep_is_in(ep)
+					? DMA_TO_DEVICE :
+					DMA_FROM_DEVICE);
+		req->mapped = 0;
+	}
+
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+
+	list_add_tail(&req->queue, &ep->queue);
+	dev_vdbg(udc->dev, "gadget have request in %s! %d\n",
+			ep->name, req->req.length);
+
+	/* push the request to device */
+	if (ep_is_in(ep))
+		reval = ep_req_send(ep, req);
+
+	/* EP0 */
+	if (ep_index(ep) == 0 && req->req.length > 0) {
+		if (ep_is_in(ep))
+			udc->ep0_state = DATA_STATE_XMIT;
+		else
+			udc->ep0_state = DATA_STATE_RECV;
+	}
+
+	if (ep->dir == USB_DIR_OUT)
+		reval = ep_req_receive(ep, req);
+
+	return 0;
+}
+
+/* queues (submits) an I/O request to an endpoint */
+static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+		       gfp_t gfp_flags)
+{
+	struct qe_ep *ep = container_of(_ep, struct qe_ep, ep);
+	struct qe_udc *udc = ep->udc;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	ret = __qe_ep_queue(_ep, _req);
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return ret;
+}
+
+/* dequeues (cancels, unlinks) an I/O request from an endpoint */
+static int qe_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct qe_ep *ep = container_of(_ep, struct qe_ep, ep);
+	struct qe_req *req = NULL;
+	struct qe_req *iter;
+	unsigned long flags;
+
+	if (!_ep || !_req)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		req = iter;
+		break;
+	}
+
+	if (!req) {
+		spin_unlock_irqrestore(&ep->udc->lock, flags);
+		return -EINVAL;
+	}
+
+	done(ep, req, -ECONNRESET);
+
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+	return 0;
+}
+
+/*-----------------------------------------------------------------
+ * modify the endpoint halt feature
+ * @ep: the non-isochronous endpoint being stalled
+ * @value: 1--set halt  0--clear halt
+ * Returns zero, or a negative error code.
+*----------------------------------------------------------------*/
+static int qe_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	struct qe_ep *ep;
+	unsigned long flags;
+	int status = -EOPNOTSUPP;
+	struct qe_udc *udc;
+
+	ep = container_of(_ep, struct qe_ep, ep);
+	if (!_ep || !ep->ep.desc) {
+		status = -EINVAL;
+		goto out;
+	}
+
+	udc = ep->udc;
+	/* Attempt to halt IN ep will fail if any transfer requests
+	 * are still queue */
+	if (value && ep_is_in(ep) && !list_empty(&ep->queue)) {
+		status = -EAGAIN;
+		goto out;
+	}
+
+	status = 0;
+	spin_lock_irqsave(&ep->udc->lock, flags);
+	qe_eptx_stall_change(ep, value);
+	qe_eprx_stall_change(ep, value);
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+
+	if (ep->epnum == 0) {
+		udc->ep0_state = WAIT_FOR_SETUP;
+		udc->ep0_dir = 0;
+	}
+
+	/* set data toggle to DATA0 on clear halt */
+	if (value == 0)
+		ep->data01 = 0;
+out:
+	dev_vdbg(udc->dev, "%s %s halt stat %d\n", ep->ep.name,
+			value ?  "set" : "clear", status);
+
+	return status;
+}
+
+static const struct usb_ep_ops qe_ep_ops = {
+	.enable = qe_ep_enable,
+	.disable = qe_ep_disable,
+
+	.alloc_request = qe_alloc_request,
+	.free_request = qe_free_request,
+
+	.queue = qe_ep_queue,
+	.dequeue = qe_ep_dequeue,
+
+	.set_halt = qe_ep_set_halt,
+};
+
+/*------------------------------------------------------------------------
+	Gadget Driver Layer Operations
+ ------------------------------------------------------------------------*/
+
+/* Get the current frame number */
+static int qe_get_frame(struct usb_gadget *gadget)
+{
+	struct qe_udc *udc = container_of(gadget, struct qe_udc, gadget);
+	u16 tmp;
+
+	tmp = in_be16(&udc->usb_param->frame_n);
+	if (tmp & 0x8000)
+		return tmp & 0x07ff;
+	return -EINVAL;
+}
+
+static int fsl_qe_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver);
+static int fsl_qe_stop(struct usb_gadget *gadget);
+
+/* defined in usb_gadget.h */
+static const struct usb_gadget_ops qe_gadget_ops = {
+	.get_frame = qe_get_frame,
+	.udc_start = fsl_qe_start,
+	.udc_stop = fsl_qe_stop,
+};
+
+/*-------------------------------------------------------------------------
+	USB ep0 Setup process in BUS Enumeration
+ -------------------------------------------------------------------------*/
+static int udc_reset_ep_queue(struct qe_udc *udc, u8 pipe)
+{
+	struct qe_ep *ep = &udc->eps[pipe];
+
+	nuke(ep, -ECONNRESET);
+	ep->tx_req = NULL;
+	return 0;
+}
+
+static int reset_queues(struct qe_udc *udc)
+{
+	u8 pipe;
+
+	for (pipe = 0; pipe < USB_MAX_ENDPOINTS; pipe++)
+		udc_reset_ep_queue(udc, pipe);
+
+	/* report disconnect; the driver is already quiesced */
+	spin_unlock(&udc->lock);
+	usb_gadget_udc_reset(&udc->gadget, udc->driver);
+	spin_lock(&udc->lock);
+
+	return 0;
+}
+
+static void ch9setaddress(struct qe_udc *udc, u16 value, u16 index,
+			u16 length)
+{
+	/* Save the new address to device struct */
+	udc->device_address = (u8) value;
+	/* Update usb state */
+	udc->usb_state = USB_STATE_ADDRESS;
+
+	/* Status phase , send a ZLP */
+	if (ep0_prime_status(udc, USB_DIR_IN))
+		qe_ep0_stall(udc);
+}
+
+static void ownercomplete(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct qe_req *req = container_of(_req, struct qe_req, req);
+
+	req->req.buf = NULL;
+	kfree(req);
+}
+
+static void ch9getstatus(struct qe_udc *udc, u8 request_type, u16 value,
+			u16 index, u16 length)
+{
+	u16 usb_status = 0;
+	struct qe_req *req;
+	struct qe_ep *ep;
+	int status = 0;
+
+	ep = &udc->eps[0];
+	if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
+		/* Get device status */
+		usb_status = 1 << USB_DEVICE_SELF_POWERED;
+	} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
+		/* Get interface status */
+		/* We don't have interface information in udc driver */
+		usb_status = 0;
+	} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
+		/* Get endpoint status */
+		int pipe = index & USB_ENDPOINT_NUMBER_MASK;
+		struct qe_ep *target_ep;
+		u16 usep;
+
+		if (pipe >= USB_MAX_ENDPOINTS)
+			goto stall;
+		target_ep = &udc->eps[pipe];
+
+		/* stall if endpoint doesn't exist */
+		if (!target_ep->ep.desc)
+			goto stall;
+
+		usep = in_be16(&udc->usb_regs->usb_usep[pipe]);
+		if (index & USB_DIR_IN) {
+			if (target_ep->dir != USB_DIR_IN)
+				goto stall;
+			if ((usep & USB_THS_MASK) == USB_THS_STALL)
+				usb_status = 1 << USB_ENDPOINT_HALT;
+		} else {
+			if (target_ep->dir != USB_DIR_OUT)
+				goto stall;
+			if ((usep & USB_RHS_MASK) == USB_RHS_STALL)
+				usb_status = 1 << USB_ENDPOINT_HALT;
+		}
+	}
+
+	req = container_of(qe_alloc_request(&ep->ep, GFP_KERNEL),
+					struct qe_req, req);
+	req->req.length = 2;
+	req->req.buf = udc->statusbuf;
+	*(u16 *)req->req.buf = cpu_to_le16(usb_status);
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+	req->req.complete = ownercomplete;
+
+	udc->ep0_dir = USB_DIR_IN;
+
+	/* data phase */
+	status = __qe_ep_queue(&ep->ep, &req->req);
+
+	if (status == 0)
+		return;
+stall:
+	dev_err(udc->dev, "Can't respond to getstatus request \n");
+	qe_ep0_stall(udc);
+}
+
+/* only handle the setup request, suppose the device in normal status */
+static void setup_received_handle(struct qe_udc *udc,
+				struct usb_ctrlrequest *setup)
+{
+	/* Fix Endian (udc->local_setup_buff is cpu Endian now)*/
+	u16 wValue = le16_to_cpu(setup->wValue);
+	u16 wIndex = le16_to_cpu(setup->wIndex);
+	u16 wLength = le16_to_cpu(setup->wLength);
+
+	/* clear the previous request in the ep0 */
+	udc_reset_ep_queue(udc, 0);
+
+	if (setup->bRequestType & USB_DIR_IN)
+		udc->ep0_dir = USB_DIR_IN;
+	else
+		udc->ep0_dir = USB_DIR_OUT;
+
+	switch (setup->bRequest) {
+	case USB_REQ_GET_STATUS:
+		/* Data+Status phase form udc */
+		if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
+					!= (USB_DIR_IN | USB_TYPE_STANDARD))
+			break;
+		ch9getstatus(udc, setup->bRequestType, wValue, wIndex,
+					wLength);
+		return;
+
+	case USB_REQ_SET_ADDRESS:
+		/* Status phase from udc */
+		if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD |
+						USB_RECIP_DEVICE))
+			break;
+		ch9setaddress(udc, wValue, wIndex, wLength);
+		return;
+
+	case USB_REQ_CLEAR_FEATURE:
+	case USB_REQ_SET_FEATURE:
+		/* Requests with no data phase, status phase from udc */
+		if ((setup->bRequestType & USB_TYPE_MASK)
+					!= USB_TYPE_STANDARD)
+			break;
+
+		if ((setup->bRequestType & USB_RECIP_MASK)
+				== USB_RECIP_ENDPOINT) {
+			int pipe = wIndex & USB_ENDPOINT_NUMBER_MASK;
+			struct qe_ep *ep;
+
+			if (wValue != 0 || wLength != 0
+				|| pipe >= USB_MAX_ENDPOINTS)
+				break;
+			ep = &udc->eps[pipe];
+
+			spin_unlock(&udc->lock);
+			qe_ep_set_halt(&ep->ep,
+					(setup->bRequest == USB_REQ_SET_FEATURE)
+						? 1 : 0);
+			spin_lock(&udc->lock);
+		}
+
+		ep0_prime_status(udc, USB_DIR_IN);
+
+		return;
+
+	default:
+		break;
+	}
+
+	if (wLength) {
+		/* Data phase from gadget, status phase from udc */
+		if (setup->bRequestType & USB_DIR_IN) {
+			udc->ep0_state = DATA_STATE_XMIT;
+			udc->ep0_dir = USB_DIR_IN;
+		} else {
+			udc->ep0_state = DATA_STATE_RECV;
+			udc->ep0_dir = USB_DIR_OUT;
+		}
+		spin_unlock(&udc->lock);
+		if (udc->driver->setup(&udc->gadget,
+					&udc->local_setup_buff) < 0)
+			qe_ep0_stall(udc);
+		spin_lock(&udc->lock);
+	} else {
+		/* No data phase, IN status from gadget */
+		udc->ep0_dir = USB_DIR_IN;
+		spin_unlock(&udc->lock);
+		if (udc->driver->setup(&udc->gadget,
+					&udc->local_setup_buff) < 0)
+			qe_ep0_stall(udc);
+		spin_lock(&udc->lock);
+		udc->ep0_state = DATA_STATE_NEED_ZLP;
+	}
+}
+
+/*-------------------------------------------------------------------------
+	USB Interrupt handlers
+ -------------------------------------------------------------------------*/
+static void suspend_irq(struct qe_udc *udc)
+{
+	udc->resume_state = udc->usb_state;
+	udc->usb_state = USB_STATE_SUSPENDED;
+
+	/* report suspend to the driver ,serial.c not support this*/
+	if (udc->driver->suspend)
+		udc->driver->suspend(&udc->gadget);
+}
+
+static void resume_irq(struct qe_udc *udc)
+{
+	udc->usb_state = udc->resume_state;
+	udc->resume_state = 0;
+
+	/* report resume to the driver , serial.c not support this*/
+	if (udc->driver->resume)
+		udc->driver->resume(&udc->gadget);
+}
+
+static void idle_irq(struct qe_udc *udc)
+{
+	u8 usbs;
+
+	usbs = in_8(&udc->usb_regs->usb_usbs);
+	if (usbs & USB_IDLE_STATUS_MASK) {
+		if ((udc->usb_state) != USB_STATE_SUSPENDED)
+			suspend_irq(udc);
+	} else {
+		if (udc->usb_state == USB_STATE_SUSPENDED)
+			resume_irq(udc);
+	}
+}
+
+static int reset_irq(struct qe_udc *udc)
+{
+	unsigned char i;
+
+	if (udc->usb_state == USB_STATE_DEFAULT)
+		return 0;
+
+	qe_usb_disable(udc);
+	out_8(&udc->usb_regs->usb_usadr, 0);
+
+	for (i = 0; i < USB_MAX_ENDPOINTS; i++) {
+		if (udc->eps[i].init)
+			qe_ep_reset(udc, i);
+	}
+
+	reset_queues(udc);
+	udc->usb_state = USB_STATE_DEFAULT;
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->ep0_dir = USB_DIR_OUT;
+	qe_usb_enable(udc);
+	return 0;
+}
+
+static int bsy_irq(struct qe_udc *udc)
+{
+	return 0;
+}
+
+static int txe_irq(struct qe_udc *udc)
+{
+	return 0;
+}
+
+/* ep0 tx interrupt also in here */
+static int tx_irq(struct qe_udc *udc)
+{
+	struct qe_ep *ep;
+	struct qe_bd __iomem *bd;
+	int i, res = 0;
+
+	if ((udc->usb_state == USB_STATE_ADDRESS)
+		&& (in_8(&udc->usb_regs->usb_usadr) == 0))
+		out_8(&udc->usb_regs->usb_usadr, udc->device_address);
+
+	for (i = (USB_MAX_ENDPOINTS-1); ((i >= 0) && (res == 0)); i--) {
+		ep = &udc->eps[i];
+		if (ep && ep->init && (ep->dir != USB_DIR_OUT)) {
+			bd = ep->c_txbd;
+			if (!(in_be32((u32 __iomem *)bd) & T_R)
+						&& (in_be32(&bd->buf))) {
+				/* confirm the transmitted bd */
+				if (ep->epnum == 0)
+					res = qe_ep0_txconf(ep);
+				else
+					res = qe_ep_txconf(ep);
+			}
+		}
+	}
+	return res;
+}
+
+
+/* setup packect's rx is handle in the function too */
+static void rx_irq(struct qe_udc *udc)
+{
+	struct qe_ep *ep;
+	struct qe_bd __iomem *bd;
+	int i;
+
+	for (i = 0; i < USB_MAX_ENDPOINTS; i++) {
+		ep = &udc->eps[i];
+		if (ep && ep->init && (ep->dir != USB_DIR_IN)) {
+			bd = ep->n_rxbd;
+			if (!(in_be32((u32 __iomem *)bd) & R_E)
+						&& (in_be32(&bd->buf))) {
+				if (ep->epnum == 0) {
+					qe_ep0_rx(udc);
+				} else {
+					/*non-setup package receive*/
+					qe_ep_rx(ep);
+				}
+			}
+		}
+	}
+}
+
+static irqreturn_t qe_udc_irq(int irq, void *_udc)
+{
+	struct qe_udc *udc = (struct qe_udc *)_udc;
+	u16 irq_src;
+	irqreturn_t status = IRQ_NONE;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	irq_src = in_be16(&udc->usb_regs->usb_usber) &
+		in_be16(&udc->usb_regs->usb_usbmr);
+	/* Clear notification bits */
+	out_be16(&udc->usb_regs->usb_usber, irq_src);
+	/* USB Interrupt */
+	if (irq_src & USB_E_IDLE_MASK) {
+		idle_irq(udc);
+		irq_src &= ~USB_E_IDLE_MASK;
+		status = IRQ_HANDLED;
+	}
+
+	if (irq_src & USB_E_TXB_MASK) {
+		tx_irq(udc);
+		irq_src &= ~USB_E_TXB_MASK;
+		status = IRQ_HANDLED;
+	}
+
+	if (irq_src & USB_E_RXB_MASK) {
+		rx_irq(udc);
+		irq_src &= ~USB_E_RXB_MASK;
+		status = IRQ_HANDLED;
+	}
+
+	if (irq_src & USB_E_RESET_MASK) {
+		reset_irq(udc);
+		irq_src &= ~USB_E_RESET_MASK;
+		status = IRQ_HANDLED;
+	}
+
+	if (irq_src & USB_E_BSY_MASK) {
+		bsy_irq(udc);
+		irq_src &= ~USB_E_BSY_MASK;
+		status = IRQ_HANDLED;
+	}
+
+	if (irq_src & USB_E_TXE_MASK) {
+		txe_irq(udc);
+		irq_src &= ~USB_E_TXE_MASK;
+		status = IRQ_HANDLED;
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return status;
+}
+
+/*-------------------------------------------------------------------------
+	Gadget driver probe and unregister.
+ --------------------------------------------------------------------------*/
+static int fsl_qe_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct qe_udc *udc;
+	unsigned long flags;
+
+	udc = container_of(gadget, struct qe_udc, gadget);
+	/* lock is needed but whether should use this lock or another */
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* hook up the driver */
+	udc->driver = driver;
+	udc->gadget.speed = driver->max_speed;
+
+	/* Enable IRQ reg and Set usbcmd reg EN bit */
+	qe_usb_enable(udc);
+
+	out_be16(&udc->usb_regs->usb_usber, 0xffff);
+	out_be16(&udc->usb_regs->usb_usbmr, USB_E_DEFAULT_DEVICE);
+	udc->usb_state = USB_STATE_ATTACHED;
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->ep0_dir = USB_DIR_OUT;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int fsl_qe_stop(struct usb_gadget *gadget)
+{
+	struct qe_udc *udc;
+	struct qe_ep *loop_ep;
+	unsigned long flags;
+
+	udc = container_of(gadget, struct qe_udc, gadget);
+	/* stop usb controller, disable intr */
+	qe_usb_disable(udc);
+
+	/* in fact, no needed */
+	udc->usb_state = USB_STATE_ATTACHED;
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->ep0_dir = 0;
+
+	/* stand operation */
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	nuke(&udc->eps[0], -ESHUTDOWN);
+	list_for_each_entry(loop_ep, &udc->gadget.ep_list, ep.ep_list)
+		nuke(loop_ep, -ESHUTDOWN);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	udc->driver = NULL;
+
+	return 0;
+}
+
+/* udc structure's alloc and setup, include ep-param alloc */
+static struct qe_udc *qe_udc_config(struct platform_device *ofdev)
+{
+	struct qe_udc *udc;
+	struct device_node *np = ofdev->dev.of_node;
+	unsigned long tmp_addr = 0;
+	struct usb_device_para __iomem *usbpram;
+	unsigned int i;
+	u64 size;
+	u32 offset;
+
+	udc = kzalloc(sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		goto cleanup;
+
+	udc->dev = &ofdev->dev;
+
+	/* get default address of usb parameter in MURAM from device tree */
+	offset = *of_get_address(np, 1, &size, NULL);
+	udc->usb_param = cpm_muram_addr(offset);
+	memset_io(udc->usb_param, 0, size);
+
+	usbpram = udc->usb_param;
+	out_be16(&usbpram->frame_n, 0);
+	out_be32(&usbpram->rstate, 0);
+
+	tmp_addr = cpm_muram_alloc((USB_MAX_ENDPOINTS *
+					sizeof(struct usb_ep_para)),
+					   USB_EP_PARA_ALIGNMENT);
+	if (IS_ERR_VALUE(tmp_addr))
+		goto cleanup;
+
+	for (i = 0; i < USB_MAX_ENDPOINTS; i++) {
+		out_be16(&usbpram->epptr[i], (u16)tmp_addr);
+		udc->ep_param[i] = cpm_muram_addr(tmp_addr);
+		tmp_addr += 32;
+	}
+
+	memset_io(udc->ep_param[0], 0,
+			USB_MAX_ENDPOINTS * sizeof(struct usb_ep_para));
+
+	udc->resume_state = USB_STATE_NOTATTACHED;
+	udc->usb_state = USB_STATE_POWERED;
+	udc->ep0_dir = 0;
+
+	spin_lock_init(&udc->lock);
+	return udc;
+
+cleanup:
+	kfree(udc);
+	return NULL;
+}
+
+/* USB Controller register init */
+static int qe_udc_reg_init(struct qe_udc *udc)
+{
+	struct usb_ctlr __iomem *qe_usbregs;
+	qe_usbregs = udc->usb_regs;
+
+	/* Spec says that we must enable the USB controller to change mode. */
+	out_8(&qe_usbregs->usb_usmod, 0x01);
+	/* Mode changed, now disable it, since muram isn't initialized yet. */
+	out_8(&qe_usbregs->usb_usmod, 0x00);
+
+	/* Initialize the rest. */
+	out_be16(&qe_usbregs->usb_usbmr, 0);
+	out_8(&qe_usbregs->usb_uscom, 0);
+	out_be16(&qe_usbregs->usb_usber, USBER_ALL_CLEAR);
+
+	return 0;
+}
+
+static int qe_ep_config(struct qe_udc *udc, unsigned char pipe_num)
+{
+	struct qe_ep *ep = &udc->eps[pipe_num];
+
+	ep->udc = udc;
+	strcpy(ep->name, ep_name[pipe_num]);
+	ep->ep.name = ep_name[pipe_num];
+
+	if (pipe_num == 0) {
+		ep->ep.caps.type_control = true;
+	} else {
+		ep->ep.caps.type_iso = true;
+		ep->ep.caps.type_bulk = true;
+		ep->ep.caps.type_int = true;
+	}
+
+	ep->ep.caps.dir_in = true;
+	ep->ep.caps.dir_out = true;
+
+	ep->ep.ops = &qe_ep_ops;
+	ep->stopped = 1;
+	usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
+	ep->ep.desc = NULL;
+	ep->dir = 0xff;
+	ep->epnum = (u8)pipe_num;
+	ep->sent = 0;
+	ep->last = 0;
+	ep->init = 0;
+	ep->rxframe = NULL;
+	ep->txframe = NULL;
+	ep->tx_req = NULL;
+	ep->state = EP_STATE_IDLE;
+	ep->has_data = 0;
+
+	/* the queue lists any req for this ep */
+	INIT_LIST_HEAD(&ep->queue);
+
+	/* gagdet.ep_list used for ep_autoconfig so no ep0*/
+	if (pipe_num != 0)
+		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+
+	ep->gadget = &udc->gadget;
+
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ *	UDC device Driver operation functions				*
+ *----------------------------------------------------------------------*/
+static void qe_udc_release(struct device *dev)
+{
+	struct qe_udc *udc = container_of(dev, struct qe_udc, gadget.dev);
+	int i;
+
+	complete(udc->done);
+	cpm_muram_free(cpm_muram_offset(udc->ep_param[0]));
+	for (i = 0; i < USB_MAX_ENDPOINTS; i++)
+		udc->ep_param[i] = NULL;
+
+	kfree(udc);
+}
+
+/* Driver probe functions */
+static const struct of_device_id qe_udc_match[];
+static int qe_udc_probe(struct platform_device *ofdev)
+{
+	struct qe_udc *udc;
+	const struct of_device_id *match;
+	struct device_node *np = ofdev->dev.of_node;
+	struct qe_ep *ep;
+	unsigned int ret = 0;
+	unsigned int i;
+	const void *prop;
+
+	match = of_match_device(qe_udc_match, &ofdev->dev);
+	if (!match)
+		return -EINVAL;
+
+	prop = of_get_property(np, "mode", NULL);
+	if (!prop || strcmp(prop, "peripheral"))
+		return -ENODEV;
+
+	/* Initialize the udc structure including QH member and other member */
+	udc = qe_udc_config(ofdev);
+	if (!udc) {
+		dev_err(&ofdev->dev, "failed to initialize\n");
+		return -ENOMEM;
+	}
+
+	udc->soc_type = (unsigned long)match->data;
+	udc->usb_regs = of_iomap(np, 0);
+	if (!udc->usb_regs) {
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	/* initialize usb hw reg except for regs for EP,
+	 * leave usbintr reg untouched*/
+	qe_udc_reg_init(udc);
+
+	/* here comes the stand operations for probe
+	 * set the qe_udc->gadget.xxx */
+	udc->gadget.ops = &qe_gadget_ops;
+
+	/* gadget.ep0 is a pointer */
+	udc->gadget.ep0 = &udc->eps[0].ep;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+
+	/* modify in register gadget process */
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+
+	/* name: Identifies the controller hardware type. */
+	udc->gadget.name = driver_name;
+	udc->gadget.dev.parent = &ofdev->dev;
+
+	/* initialize qe_ep struct */
+	for (i = 0; i < USB_MAX_ENDPOINTS ; i++) {
+		/* because the ep type isn't decide here so
+		 * qe_ep_init() should be called in ep_enable() */
+
+		/* setup the qe_ep struct and link ep.ep.list
+		 * into gadget.ep_list */
+		qe_ep_config(udc, (unsigned char)i);
+	}
+
+	/* ep0 initialization in here */
+	ret = qe_ep_init(udc, 0, &qe_ep0_desc);
+	if (ret)
+		goto err2;
+
+	/* create a buf for ZLP send, need to remain zeroed */
+	udc->nullbuf = devm_kzalloc(&ofdev->dev, 256, GFP_KERNEL);
+	if (udc->nullbuf == NULL) {
+		ret = -ENOMEM;
+		goto err3;
+	}
+
+	/* buffer for data of get_status request */
+	udc->statusbuf = devm_kzalloc(&ofdev->dev, 2, GFP_KERNEL);
+	if (udc->statusbuf == NULL) {
+		ret = -ENOMEM;
+		goto err3;
+	}
+
+	udc->nullp = virt_to_phys((void *)udc->nullbuf);
+	if (udc->nullp == DMA_ADDR_INVALID) {
+		udc->nullp = dma_map_single(
+					udc->gadget.dev.parent,
+					udc->nullbuf,
+					256,
+					DMA_TO_DEVICE);
+		udc->nullmap = 1;
+	} else {
+		dma_sync_single_for_device(udc->gadget.dev.parent,
+					udc->nullp, 256,
+					DMA_TO_DEVICE);
+	}
+
+	tasklet_setup(&udc->rx_tasklet, ep_rx_tasklet);
+	/* request irq and disable DR  */
+	udc->usb_irq = irq_of_parse_and_map(np, 0);
+	if (!udc->usb_irq) {
+		ret = -EINVAL;
+		goto err_noirq;
+	}
+
+	ret = request_irq(udc->usb_irq, qe_udc_irq, 0,
+				driver_name, udc);
+	if (ret) {
+		dev_err(udc->dev, "cannot request irq %d err %d\n",
+				udc->usb_irq, ret);
+		goto err4;
+	}
+
+	ret = usb_add_gadget_udc_release(&ofdev->dev, &udc->gadget,
+			qe_udc_release);
+	if (ret)
+		goto err5;
+
+	platform_set_drvdata(ofdev, udc);
+	dev_info(udc->dev,
+			"%s USB controller initialized as device\n",
+			(udc->soc_type == PORT_QE) ? "QE" : "CPM");
+	return 0;
+
+err5:
+	free_irq(udc->usb_irq, udc);
+err4:
+	irq_dispose_mapping(udc->usb_irq);
+err_noirq:
+	if (udc->nullmap) {
+		dma_unmap_single(udc->gadget.dev.parent,
+			udc->nullp, 256,
+				DMA_TO_DEVICE);
+			udc->nullp = DMA_ADDR_INVALID;
+	} else {
+		dma_sync_single_for_cpu(udc->gadget.dev.parent,
+			udc->nullp, 256,
+				DMA_TO_DEVICE);
+	}
+err3:
+	ep = &udc->eps[0];
+	cpm_muram_free(cpm_muram_offset(ep->rxbase));
+	kfree(ep->rxframe);
+	kfree(ep->rxbuffer);
+	kfree(ep->txframe);
+err2:
+	iounmap(udc->usb_regs);
+err1:
+	kfree(udc);
+	return ret;
+}
+
+#ifdef CONFIG_PM
+static int qe_udc_suspend(struct platform_device *dev, pm_message_t state)
+{
+	return -ENOTSUPP;
+}
+
+static int qe_udc_resume(struct platform_device *dev)
+{
+	return -ENOTSUPP;
+}
+#endif
+
+static int qe_udc_remove(struct platform_device *ofdev)
+{
+	struct qe_udc *udc = platform_get_drvdata(ofdev);
+	struct qe_ep *ep;
+	unsigned int size;
+	DECLARE_COMPLETION_ONSTACK(done);
+
+	usb_del_gadget_udc(&udc->gadget);
+
+	udc->done = &done;
+	tasklet_disable(&udc->rx_tasklet);
+
+	if (udc->nullmap) {
+		dma_unmap_single(udc->gadget.dev.parent,
+			udc->nullp, 256,
+				DMA_TO_DEVICE);
+			udc->nullp = DMA_ADDR_INVALID;
+	} else {
+		dma_sync_single_for_cpu(udc->gadget.dev.parent,
+			udc->nullp, 256,
+				DMA_TO_DEVICE);
+	}
+
+	ep = &udc->eps[0];
+	cpm_muram_free(cpm_muram_offset(ep->rxbase));
+	size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (USB_BDRING_LEN + 1);
+
+	kfree(ep->rxframe);
+	if (ep->rxbufmap) {
+		dma_unmap_single(udc->gadget.dev.parent,
+				ep->rxbuf_d, size,
+				DMA_FROM_DEVICE);
+		ep->rxbuf_d = DMA_ADDR_INVALID;
+	} else {
+		dma_sync_single_for_cpu(udc->gadget.dev.parent,
+				ep->rxbuf_d, size,
+				DMA_FROM_DEVICE);
+	}
+
+	kfree(ep->rxbuffer);
+	kfree(ep->txframe);
+
+	free_irq(udc->usb_irq, udc);
+	irq_dispose_mapping(udc->usb_irq);
+
+	tasklet_kill(&udc->rx_tasklet);
+
+	iounmap(udc->usb_regs);
+
+	/* wait for release() of gadget.dev to free udc */
+	wait_for_completion(&done);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static const struct of_device_id qe_udc_match[] = {
+	{
+		.compatible = "fsl,mpc8323-qe-usb",
+		.data = (void *)PORT_QE,
+	},
+	{
+		.compatible = "fsl,mpc8360-qe-usb",
+		.data = (void *)PORT_QE,
+	},
+	{
+		.compatible = "fsl,mpc8272-cpm-usb",
+		.data = (void *)PORT_CPM,
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, qe_udc_match);
+
+static struct platform_driver udc_driver = {
+	.driver = {
+		.name = driver_name,
+		.of_match_table = qe_udc_match,
+	},
+	.probe          = qe_udc_probe,
+	.remove         = qe_udc_remove,
+#ifdef CONFIG_PM
+	.suspend        = qe_udc_suspend,
+	.resume         = qe_udc_resume,
+#endif
+};
+
+module_platform_driver(udc_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h
new file mode 100644
index 000000000..53ca0ff7c
--- /dev/null
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.h
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * drivers/usb/gadget/qe_udc.h
+ *
+ * Copyright (C) 2006-2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * 	Xiaobo Xie <X.Xie@freescale.com>
+ * 	Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Freescale USB device/endpoint management registers
+ */
+
+#ifndef __FSL_QE_UDC_H
+#define __FSL_QE_UDC_H
+
+/* SoC type */
+#define PORT_CPM	0
+#define PORT_QE		1
+
+#define USB_MAX_ENDPOINTS               4
+#define USB_MAX_PIPES                   USB_MAX_ENDPOINTS
+#define USB_EP0_MAX_SIZE		64
+#define USB_MAX_CTRL_PAYLOAD            0x4000
+#define USB_BDRING_LEN			16
+#define USB_BDRING_LEN_RX		256
+#define USB_BDRING_LEN_TX		16
+#define MIN_EMPTY_BDS			128
+#define MAX_DATA_BDS			8
+#define USB_CRC_SIZE			2
+#define USB_DIR_BOTH			0x88
+#define R_BUF_MAXSIZE			0x800
+#define USB_EP_PARA_ALIGNMENT		32
+
+/* USB Mode Register bit define */
+#define USB_MODE_EN		0x01
+#define USB_MODE_HOST		0x02
+#define USB_MODE_TEST		0x04
+#define USB_MODE_SFTE		0x08
+#define USB_MODE_RESUME		0x40
+#define USB_MODE_LSS		0x80
+
+/* USB Slave Address Register Mask */
+#define USB_SLVADDR_MASK	0x7F
+
+/* USB Endpoint register define */
+#define USB_EPNUM_MASK		0xF000
+#define USB_EPNUM_SHIFT		12
+
+#define USB_TRANS_MODE_SHIFT	8
+#define USB_TRANS_CTR		0x0000
+#define USB_TRANS_INT		0x0100
+#define USB_TRANS_BULK		0x0200
+#define USB_TRANS_ISO		0x0300
+
+#define USB_EP_MF		0x0020
+#define USB_EP_RTE		0x0010
+
+#define USB_THS_SHIFT		2
+#define USB_THS_MASK		0x000c
+#define USB_THS_NORMAL		0x0
+#define USB_THS_IGNORE_IN	0x0004
+#define USB_THS_NACK		0x0008
+#define USB_THS_STALL		0x000c
+
+#define USB_RHS_SHIFT   	0
+#define USB_RHS_MASK		0x0003
+#define USB_RHS_NORMAL  	0x0
+#define USB_RHS_IGNORE_OUT	0x0001
+#define USB_RHS_NACK		0x0002
+#define USB_RHS_STALL		0x0003
+
+#define USB_RTHS_MASK		0x000f
+
+/* USB Command Register define */
+#define USB_CMD_STR_FIFO	0x80
+#define USB_CMD_FLUSH_FIFO	0x40
+#define USB_CMD_ISFT		0x20
+#define USB_CMD_DSFT		0x10
+#define USB_CMD_EP_MASK		0x03
+
+/* USB Event and Mask Register define */
+#define USB_E_MSF_MASK		0x0800
+#define USB_E_SFT_MASK		0x0400
+#define USB_E_RESET_MASK	0x0200
+#define USB_E_IDLE_MASK		0x0100
+#define USB_E_TXE4_MASK		0x0080
+#define USB_E_TXE3_MASK		0x0040
+#define USB_E_TXE2_MASK		0x0020
+#define USB_E_TXE1_MASK		0x0010
+#define USB_E_SOF_MASK		0x0008
+#define USB_E_BSY_MASK		0x0004
+#define USB_E_TXB_MASK		0x0002
+#define USB_E_RXB_MASK		0x0001
+#define USBER_ALL_CLEAR 	0x0fff
+
+#define USB_E_DEFAULT_DEVICE   (USB_E_RESET_MASK | USB_E_TXE4_MASK | \
+				USB_E_TXE3_MASK | USB_E_TXE2_MASK | \
+				USB_E_TXE1_MASK | USB_E_BSY_MASK | \
+				USB_E_TXB_MASK | USB_E_RXB_MASK)
+
+#define USB_E_TXE_MASK         (USB_E_TXE4_MASK | USB_E_TXE3_MASK|\
+				 USB_E_TXE2_MASK | USB_E_TXE1_MASK)
+/* USB Status Register define */
+#define USB_IDLE_STATUS_MASK	0x01
+
+/* USB Start of Frame Timer */
+#define USB_USSFT_MASK		0x3FFF
+
+/* USB Frame Number Register */
+#define USB_USFRN_MASK		0xFFFF
+
+struct usb_device_para{
+	u16	epptr[4];
+	u32	rstate;
+	u32	rptr;
+	u16	frame_n;
+	u16	rbcnt;
+	u32	rtemp;
+	u32	rxusb_data;
+	u16	rxuptr;
+	u8	reso[2];
+	u32	softbl;
+	u8	sofucrctemp;
+};
+
+struct usb_ep_para{
+	u16	rbase;
+	u16	tbase;
+	u8	rbmr;
+	u8	tbmr;
+	u16	mrblr;
+	u16	rbptr;
+	u16	tbptr;
+	u32	tstate;
+	u32	tptr;
+	u16	tcrc;
+	u16	tbcnt;
+	u32	ttemp;
+	u16	txusbu_ptr;
+	u8	reserve[2];
+};
+
+#define USB_BUSMODE_GBL		0x20
+#define USB_BUSMODE_BO_MASK	0x18
+#define USB_BUSMODE_BO_SHIFT	0x3
+#define USB_BUSMODE_BE		0x2
+#define USB_BUSMODE_CETM	0x04
+#define USB_BUSMODE_DTB		0x02
+
+/* Endpoint basic handle */
+#define ep_index(EP)		((EP)->ep.desc->bEndpointAddress & 0xF)
+#define ep_maxpacket(EP)	((EP)->ep.maxpacket)
+#define ep_is_in(EP)	((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
+			USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
+			& USB_DIR_IN) == USB_DIR_IN)
+
+/* ep0 transfer state */
+#define WAIT_FOR_SETUP          0
+#define DATA_STATE_XMIT         1
+#define DATA_STATE_NEED_ZLP     2
+#define WAIT_FOR_OUT_STATUS     3
+#define DATA_STATE_RECV         4
+
+/* ep tramsfer mode */
+#define USBP_TM_CTL	0
+#define USBP_TM_ISO	1
+#define USBP_TM_BULK	2
+#define USBP_TM_INT	3
+
+/*-----------------------------------------------------------------------------
+	USB RX And TX DATA Frame
+ -----------------------------------------------------------------------------*/
+struct qe_frame{
+	u8 *data;
+	u32 len;
+	u32 status;
+	u32 info;
+
+	void *privdata;
+	struct list_head node;
+};
+
+/* Frame structure, info field. */
+#define PID_DATA0              0x80000000 /* Data toggle zero */
+#define PID_DATA1              0x40000000 /* Data toggle one  */
+#define PID_SETUP              0x20000000 /* setup bit */
+#define SETUP_STATUS           0x10000000 /* setup status bit */
+#define SETADDR_STATUS         0x08000000 /* setupup address status bit */
+#define NO_REQ                 0x04000000 /* Frame without request */
+#define HOST_DATA              0x02000000 /* Host data frame */
+#define FIRST_PACKET_IN_FRAME  0x01000000 /* first packet in the frame */
+#define TOKEN_FRAME            0x00800000 /* Host token frame */
+#define ZLP                    0x00400000 /* Zero length packet */
+#define IN_TOKEN_FRAME         0x00200000 /* In token package */
+#define OUT_TOKEN_FRAME        0x00100000 /* Out token package */
+#define SETUP_TOKEN_FRAME      0x00080000 /* Setup token package */
+#define STALL_FRAME            0x00040000 /* Stall handshake */
+#define NACK_FRAME             0x00020000 /* Nack handshake */
+#define NO_PID                 0x00010000 /* No send PID */
+#define NO_CRC                 0x00008000 /* No send CRC */
+#define HOST_COMMAND           0x00004000 /* Host command frame   */
+
+/* Frame status field */
+/* Receive side */
+#define FRAME_OK               0x00000000 /* Frame transmitted or received OK */
+#define FRAME_ERROR            0x80000000 /* Error occurred on frame */
+#define START_FRAME_LOST       0x40000000 /* START_FRAME_LOST */
+#define END_FRAME_LOST         0x20000000 /* END_FRAME_LOST */
+#define RX_ER_NONOCT           0x10000000 /* Rx Non Octet Aligned Packet */
+#define RX_ER_BITSTUFF         0x08000000 /* Frame Aborted --Received packet
+					     with bit stuff error */
+#define RX_ER_CRC              0x04000000 /* Received packet with CRC error */
+#define RX_ER_OVERUN           0x02000000 /* Over-run occurred on reception */
+#define RX_ER_PID              0x01000000 /* Wrong PID received */
+/* Tranmit side */
+#define TX_ER_NAK              0x00800000 /* Received NAK handshake */
+#define TX_ER_STALL            0x00400000 /* Received STALL handshake */
+#define TX_ER_TIMEOUT          0x00200000 /* Transmit time out */
+#define TX_ER_UNDERUN          0x00100000 /* Transmit underrun */
+#define FRAME_INPROGRESS       0x00080000 /* Frame is being transmitted */
+#define ER_DATA_UNDERUN        0x00040000 /* Frame is shorter then expected */
+#define ER_DATA_OVERUN         0x00020000 /* Frame is longer then expected */
+
+/* QE USB frame operation functions */
+#define frame_get_length(frm) (frm->len)
+#define frame_set_length(frm, leng) (frm->len = leng)
+#define frame_get_data(frm) (frm->data)
+#define frame_set_data(frm, dat) (frm->data = dat)
+#define frame_get_info(frm) (frm->info)
+#define frame_set_info(frm, inf) (frm->info = inf)
+#define frame_get_status(frm) (frm->status)
+#define frame_set_status(frm, stat) (frm->status = stat)
+#define frame_get_privdata(frm) (frm->privdata)
+#define frame_set_privdata(frm, dat) (frm->privdata = dat)
+
+static inline void qe_frame_clean(struct qe_frame *frm)
+{
+	frame_set_data(frm, NULL);
+	frame_set_length(frm, 0);
+	frame_set_status(frm, FRAME_OK);
+	frame_set_info(frm, 0);
+	frame_set_privdata(frm, NULL);
+}
+
+static inline void qe_frame_init(struct qe_frame *frm)
+{
+	qe_frame_clean(frm);
+	INIT_LIST_HEAD(&(frm->node));
+}
+
+struct qe_req {
+	struct usb_request req;
+	struct list_head queue;
+	/* ep_queue() func will add
+	 a request->queue into a udc_ep->queue 'd tail */
+	struct qe_ep *ep;
+	unsigned mapped:1;
+};
+
+struct qe_ep {
+	struct usb_ep ep;
+	struct list_head queue;
+	struct qe_udc *udc;
+	struct usb_gadget *gadget;
+
+	u8 state;
+
+	struct qe_bd __iomem *rxbase;
+	struct qe_bd __iomem *n_rxbd;
+	struct qe_bd __iomem *e_rxbd;
+
+	struct qe_bd __iomem *txbase;
+	struct qe_bd __iomem *n_txbd;
+	struct qe_bd __iomem *c_txbd;
+
+	struct qe_frame *rxframe;
+	u8 *rxbuffer;
+	dma_addr_t rxbuf_d;
+	u8 rxbufmap;
+	unsigned char localnack;
+	int has_data;
+
+	struct qe_frame *txframe;
+	struct qe_req *tx_req;
+	int sent;  /*data already sent */
+	int last;  /*data sent in the last time*/
+
+	u8 dir;
+	u8 epnum;
+	u8 tm; /* transfer mode */
+	u8 data01;
+	u8 init;
+
+	u8 already_seen;
+	u8 enable_tasklet;
+	u8 setup_stage;
+	u32 last_io;            /* timestamp */
+
+	char name[14];
+
+	unsigned double_buf:1;
+	unsigned stopped:1;
+	unsigned fnf:1;
+	unsigned has_dma:1;
+
+	u8 ackwait;
+	u8 dma_channel;
+	u16 dma_counter;
+	int lch;
+
+	struct timer_list timer;
+};
+
+struct qe_udc {
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *driver;
+	struct device *dev;
+	struct qe_ep eps[USB_MAX_ENDPOINTS];
+	struct usb_ctrlrequest local_setup_buff;
+	spinlock_t lock;	/* lock for set/config qe_udc */
+	unsigned long soc_type;		/* QE or CPM soc */
+
+	struct qe_req *status_req;	/* ep0 status request */
+
+	/* USB and EP Parameter Block pointer */
+	struct usb_device_para __iomem *usb_param;
+	struct usb_ep_para __iomem *ep_param[4];
+
+	u32 max_pipes;          /* Device max pipes */
+	u32 max_use_endpts;     /* Max endpointes to be used */
+	u32 bus_reset;          /* Device is bus reseting */
+	u32 resume_state;       /* USB state to resume*/
+	u32 usb_state;          /* USB current state */
+	u32 usb_next_state;     /* USB next state */
+	u32 ep0_state;          /* Endpoint zero state */
+	u32 ep0_dir;            /* Endpoint zero direction: can be
+				USB_DIR_IN or USB_DIR_OUT*/
+	u32 usb_sof_count;      /* SOF count */
+	u32 errors;             /* USB ERRORs count */
+
+	u8 *tmpbuf;
+	u32 c_start;
+	u32 c_end;
+
+	u8 *nullbuf;
+	u8 *statusbuf;
+	dma_addr_t nullp;
+	u8 nullmap;
+	u8 device_address;	/* Device USB address */
+
+	unsigned int usb_clock;
+	unsigned int usb_irq;
+	struct usb_ctlr __iomem *usb_regs;
+
+	struct tasklet_struct rx_tasklet;
+
+	struct completion *done;	/* to make sure release() is done */
+};
+
+#define EP_STATE_IDLE	0
+#define EP_STATE_NACK	1
+#define EP_STATE_STALL	2
+
+/*
+ * transmit BD's status
+ */
+#define T_R           0x80000000         /* ready bit */
+#define T_W           0x20000000         /* wrap bit */
+#define T_I           0x10000000         /* interrupt on completion */
+#define T_L           0x08000000         /* last */
+#define T_TC          0x04000000         /* transmit CRC */
+#define T_CNF         0x02000000         /* wait for  transmit confirm */
+#define T_LSP         0x01000000         /* Low-speed transaction */
+#define T_PID         0x00c00000         /* packet id */
+#define T_NAK         0x00100000         /* No ack. */
+#define T_STAL        0x00080000         /* Stall received */
+#define T_TO          0x00040000         /* time out */
+#define T_UN          0x00020000         /* underrun */
+
+#define DEVICE_T_ERROR    (T_UN | T_TO)
+#define HOST_T_ERROR      (T_UN | T_TO | T_NAK | T_STAL)
+#define DEVICE_T_BD_MASK  DEVICE_T_ERROR
+#define HOST_T_BD_MASK    HOST_T_ERROR
+
+#define T_PID_SHIFT   6
+#define T_PID_DATA0   0x00800000         /* Data 0 toggle */
+#define T_PID_DATA1   0x00c00000         /* Data 1 toggle */
+
+/*
+ * receive BD's status
+ */
+#define R_E           0x80000000         /* buffer empty */
+#define R_W           0x20000000         /* wrap bit */
+#define R_I           0x10000000         /* interrupt on reception */
+#define R_L           0x08000000         /* last */
+#define R_F           0x04000000         /* first */
+#define R_PID         0x00c00000         /* packet id */
+#define R_NO          0x00100000         /* Rx Non Octet Aligned Packet */
+#define R_AB          0x00080000         /* Frame Aborted */
+#define R_CR          0x00040000         /* CRC Error */
+#define R_OV          0x00020000         /* Overrun */
+
+#define R_ERROR       (R_NO | R_AB | R_CR | R_OV)
+#define R_BD_MASK     R_ERROR
+
+#define R_PID_DATA0   0x00000000
+#define R_PID_DATA1   0x00400000
+#define R_PID_SETUP   0x00800000
+
+#define CPM_USB_STOP_TX 0x2e600000
+#define CPM_USB_RESTART_TX 0x2e600000
+#define CPM_USB_STOP_TX_OPCODE 0x0a
+#define CPM_USB_RESTART_TX_OPCODE 0x0b
+#define CPM_USB_EP_SHIFT 5
+
+#endif  /* __FSL_QE_UDC_H */
diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
new file mode 100644
index 000000000..a67873a07
--- /dev/null
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -0,0 +1,2688 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2004-2007,2011-2012 Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ *         Jiang Bo <tanya.jiang@freescale.com>
+ *
+ * Description:
+ * Freescale high-speed USB SOC DR module device controller driver.
+ * This can be found on MPC8349E/MPC8313E/MPC5121E cpus.
+ * The driver is previously named as mpc_udc.  Based on bare board
+ * code from Dave Liu and Shlomi Gridish.
+ */
+
+#undef VERBOSE
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/mm.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <linux/dmapool.h>
+#include <linux/of_device.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/unaligned.h>
+#include <asm/dma.h>
+
+#include "fsl_usb2_udc.h"
+
+#define	DRIVER_DESC	"Freescale High-Speed USB SOC Device Controller driver"
+#define	DRIVER_AUTHOR	"Li Yang/Jiang Bo"
+#define	DRIVER_VERSION	"Apr 20, 2007"
+
+#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+static const char driver_name[] = "fsl-usb2-udc";
+
+static struct usb_dr_device __iomem *dr_regs;
+
+static struct usb_sys_interface __iomem *usb_sys_regs;
+
+/* it is initialized in probe()  */
+static struct fsl_udc *udc_controller = NULL;
+
+static const struct usb_endpoint_descriptor
+fsl_ep0_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	0,
+	.bmAttributes =		USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize =	USB_MAX_CTRL_PAYLOAD,
+};
+
+static void fsl_ep_fifo_flush(struct usb_ep *_ep);
+
+#ifdef CONFIG_PPC32
+/*
+ * On some SoCs, the USB controller registers can be big or little endian,
+ * depending on the version of the chip. In order to be able to run the
+ * same kernel binary on 2 different versions of an SoC, the BE/LE decision
+ * must be made at run time. _fsl_readl and fsl_writel are pointers to the
+ * BE or LE readl() and writel() functions, and fsl_readl() and fsl_writel()
+ * call through those pointers. Platform code for SoCs that have BE USB
+ * registers should set pdata->big_endian_mmio flag.
+ *
+ * This also applies to controller-to-cpu accessors for the USB descriptors,
+ * since their endianness is also SoC dependant. Platform code for SoCs that
+ * have BE USB descriptors should set pdata->big_endian_desc flag.
+ */
+static u32 _fsl_readl_be(const unsigned __iomem *p)
+{
+	return in_be32(p);
+}
+
+static u32 _fsl_readl_le(const unsigned __iomem *p)
+{
+	return in_le32(p);
+}
+
+static void _fsl_writel_be(u32 v, unsigned __iomem *p)
+{
+	out_be32(p, v);
+}
+
+static void _fsl_writel_le(u32 v, unsigned __iomem *p)
+{
+	out_le32(p, v);
+}
+
+static u32 (*_fsl_readl)(const unsigned __iomem *p);
+static void (*_fsl_writel)(u32 v, unsigned __iomem *p);
+
+#define fsl_readl(p)		(*_fsl_readl)((p))
+#define fsl_writel(v, p)	(*_fsl_writel)((v), (p))
+
+static inline void fsl_set_accessors(struct fsl_usb2_platform_data *pdata)
+{
+	if (pdata->big_endian_mmio) {
+		_fsl_readl = _fsl_readl_be;
+		_fsl_writel = _fsl_writel_be;
+	} else {
+		_fsl_readl = _fsl_readl_le;
+		_fsl_writel = _fsl_writel_le;
+	}
+}
+
+static inline u32 cpu_to_hc32(const u32 x)
+{
+	return udc_controller->pdata->big_endian_desc
+		? (__force u32)cpu_to_be32(x)
+		: (__force u32)cpu_to_le32(x);
+}
+
+static inline u32 hc32_to_cpu(const u32 x)
+{
+	return udc_controller->pdata->big_endian_desc
+		? be32_to_cpu((__force __be32)x)
+		: le32_to_cpu((__force __le32)x);
+}
+#else /* !CONFIG_PPC32 */
+static inline void fsl_set_accessors(struct fsl_usb2_platform_data *pdata) {}
+
+#define fsl_readl(addr)		readl(addr)
+#define fsl_writel(val32, addr) writel(val32, addr)
+#define cpu_to_hc32(x)		cpu_to_le32(x)
+#define hc32_to_cpu(x)		le32_to_cpu(x)
+#endif /* CONFIG_PPC32 */
+
+/********************************************************************
+ *	Internal Used Function
+********************************************************************/
+/*-----------------------------------------------------------------
+ * done() - retire a request; caller blocked irqs
+ * @status : request status to be set, only works when
+ *	request is still in progress.
+ *--------------------------------------------------------------*/
+static void done(struct fsl_ep *ep, struct fsl_req *req, int status)
+__releases(ep->udc->lock)
+__acquires(ep->udc->lock)
+{
+	struct fsl_udc *udc = NULL;
+	unsigned char stopped = ep->stopped;
+	struct ep_td_struct *curr_td, *next_td;
+	int j;
+
+	udc = (struct fsl_udc *)ep->udc;
+	/* Removed the req from fsl_ep->queue */
+	list_del_init(&req->queue);
+
+	/* req.status should be set as -EINPROGRESS in ep_queue() */
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	/* Free dtd for the request */
+	next_td = req->head;
+	for (j = 0; j < req->dtd_count; j++) {
+		curr_td = next_td;
+		if (j != req->dtd_count - 1) {
+			next_td = curr_td->next_td_virt;
+		}
+		dma_pool_free(udc->td_pool, curr_td, curr_td->td_dma);
+	}
+
+	usb_gadget_unmap_request(&ep->udc->gadget, &req->req, ep_is_in(ep));
+
+	if (status && (status != -ESHUTDOWN))
+		VDBG("complete %s req %p stat %d len %u/%u",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length);
+
+	ep->stopped = 1;
+
+	spin_unlock(&ep->udc->lock);
+
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+
+	spin_lock(&ep->udc->lock);
+	ep->stopped = stopped;
+}
+
+/*-----------------------------------------------------------------
+ * nuke(): delete all requests related to this ep
+ * called with spinlock held
+ *--------------------------------------------------------------*/
+static void nuke(struct fsl_ep *ep, int status)
+{
+	ep->stopped = 1;
+
+	/* Flush fifo */
+	fsl_ep_fifo_flush(&ep->ep);
+
+	/* Whether this eq has request linked */
+	while (!list_empty(&ep->queue)) {
+		struct fsl_req *req = NULL;
+
+		req = list_entry(ep->queue.next, struct fsl_req, queue);
+		done(ep, req, status);
+	}
+}
+
+/*------------------------------------------------------------------
+	Internal Hardware related function
+ ------------------------------------------------------------------*/
+
+static int dr_controller_setup(struct fsl_udc *udc)
+{
+	unsigned int tmp, portctrl, ep_num;
+	unsigned int max_no_of_ep;
+	unsigned int ctrl;
+	unsigned long timeout;
+
+#define FSL_UDC_RESET_TIMEOUT 1000
+
+	/* Config PHY interface */
+	portctrl = fsl_readl(&dr_regs->portsc1);
+	portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);
+	switch (udc->phy_mode) {
+	case FSL_USB2_PHY_ULPI:
+		if (udc->pdata->have_sysif_regs) {
+			if (udc->pdata->controller_ver) {
+				/* controller version 1.6 or above */
+				ctrl = __raw_readl(&usb_sys_regs->control);
+				ctrl &= ~USB_CTRL_UTMI_PHY_EN;
+				ctrl |= USB_CTRL_USB_EN;
+				__raw_writel(ctrl, &usb_sys_regs->control);
+			}
+		}
+		portctrl |= PORTSCX_PTS_ULPI;
+		break;
+	case FSL_USB2_PHY_UTMI_WIDE:
+		portctrl |= PORTSCX_PTW_16BIT;
+		fallthrough;
+	case FSL_USB2_PHY_UTMI:
+	case FSL_USB2_PHY_UTMI_DUAL:
+		if (udc->pdata->have_sysif_regs) {
+			if (udc->pdata->controller_ver) {
+				/* controller version 1.6 or above */
+				ctrl = __raw_readl(&usb_sys_regs->control);
+				ctrl |= (USB_CTRL_UTMI_PHY_EN |
+					USB_CTRL_USB_EN);
+				__raw_writel(ctrl, &usb_sys_regs->control);
+				mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI
+					PHY CLK to become stable - 10ms*/
+			}
+		}
+		portctrl |= PORTSCX_PTS_UTMI;
+		break;
+	case FSL_USB2_PHY_SERIAL:
+		portctrl |= PORTSCX_PTS_FSLS;
+		break;
+	default:
+		return -EINVAL;
+	}
+	fsl_writel(portctrl, &dr_regs->portsc1);
+
+	/* Stop and reset the usb controller */
+	tmp = fsl_readl(&dr_regs->usbcmd);
+	tmp &= ~USB_CMD_RUN_STOP;
+	fsl_writel(tmp, &dr_regs->usbcmd);
+
+	tmp = fsl_readl(&dr_regs->usbcmd);
+	tmp |= USB_CMD_CTRL_RESET;
+	fsl_writel(tmp, &dr_regs->usbcmd);
+
+	/* Wait for reset to complete */
+	timeout = jiffies + FSL_UDC_RESET_TIMEOUT;
+	while (fsl_readl(&dr_regs->usbcmd) & USB_CMD_CTRL_RESET) {
+		if (time_after(jiffies, timeout)) {
+			ERR("udc reset timeout!\n");
+			return -ETIMEDOUT;
+		}
+		cpu_relax();
+	}
+
+	/* Set the controller as device mode */
+	tmp = fsl_readl(&dr_regs->usbmode);
+	tmp &= ~USB_MODE_CTRL_MODE_MASK;	/* clear mode bits */
+	tmp |= USB_MODE_CTRL_MODE_DEVICE;
+	/* Disable Setup Lockout */
+	tmp |= USB_MODE_SETUP_LOCK_OFF;
+	if (udc->pdata->es)
+		tmp |= USB_MODE_ES;
+	fsl_writel(tmp, &dr_regs->usbmode);
+
+	/* Clear the setup status */
+	fsl_writel(0, &dr_regs->usbsts);
+
+	tmp = udc->ep_qh_dma;
+	tmp &= USB_EP_LIST_ADDRESS_MASK;
+	fsl_writel(tmp, &dr_regs->endpointlistaddr);
+
+	VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x",
+		udc->ep_qh, (int)tmp,
+		fsl_readl(&dr_regs->endpointlistaddr));
+
+	max_no_of_ep = (0x0000001F & fsl_readl(&dr_regs->dccparams));
+	for (ep_num = 1; ep_num < max_no_of_ep; ep_num++) {
+		tmp = fsl_readl(&dr_regs->endptctrl[ep_num]);
+		tmp &= ~(EPCTRL_TX_TYPE | EPCTRL_RX_TYPE);
+		tmp |= (EPCTRL_EP_TYPE_BULK << EPCTRL_TX_EP_TYPE_SHIFT)
+		| (EPCTRL_EP_TYPE_BULK << EPCTRL_RX_EP_TYPE_SHIFT);
+		fsl_writel(tmp, &dr_regs->endptctrl[ep_num]);
+	}
+	/* Config control enable i/o output, cpu endian register */
+	if (udc->pdata->have_sysif_regs) {
+		ctrl = __raw_readl(&usb_sys_regs->control);
+		ctrl |= USB_CTRL_IOENB;
+		__raw_writel(ctrl, &usb_sys_regs->control);
+	}
+
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+	/* Turn on cache snooping hardware, since some PowerPC platforms
+	 * wholly rely on hardware to deal with cache coherent. */
+
+	if (udc->pdata->have_sysif_regs) {
+		/* Setup Snooping for all the 4GB space */
+		tmp = SNOOP_SIZE_2GB;	/* starts from 0x0, size 2G */
+		__raw_writel(tmp, &usb_sys_regs->snoop1);
+		tmp |= 0x80000000;	/* starts from 0x8000000, size 2G */
+		__raw_writel(tmp, &usb_sys_regs->snoop2);
+	}
+#endif
+
+	return 0;
+}
+
+/* Enable DR irq and set controller to run state */
+static void dr_controller_run(struct fsl_udc *udc)
+{
+	u32 temp;
+
+	/* Enable DR irq reg */
+	temp = USB_INTR_INT_EN | USB_INTR_ERR_INT_EN
+		| USB_INTR_PTC_DETECT_EN | USB_INTR_RESET_EN
+		| USB_INTR_DEVICE_SUSPEND | USB_INTR_SYS_ERR_EN;
+
+	fsl_writel(temp, &dr_regs->usbintr);
+
+	/* Clear stopped bit */
+	udc->stopped = 0;
+
+	/* Set the controller as device mode */
+	temp = fsl_readl(&dr_regs->usbmode);
+	temp |= USB_MODE_CTRL_MODE_DEVICE;
+	fsl_writel(temp, &dr_regs->usbmode);
+
+	/* Set controller to Run */
+	temp = fsl_readl(&dr_regs->usbcmd);
+	temp |= USB_CMD_RUN_STOP;
+	fsl_writel(temp, &dr_regs->usbcmd);
+}
+
+static void dr_controller_stop(struct fsl_udc *udc)
+{
+	unsigned int tmp;
+
+	pr_debug("%s\n", __func__);
+
+	/* if we're in OTG mode, and the Host is currently using the port,
+	 * stop now and don't rip the controller out from under the
+	 * ehci driver
+	 */
+	if (udc->gadget.is_otg) {
+		if (!(fsl_readl(&dr_regs->otgsc) & OTGSC_STS_USB_ID)) {
+			pr_debug("udc: Leaving early\n");
+			return;
+		}
+	}
+
+	/* disable all INTR */
+	fsl_writel(0, &dr_regs->usbintr);
+
+	/* Set stopped bit for isr */
+	udc->stopped = 1;
+
+	/* disable IO output */
+/*	usb_sys_regs->control = 0; */
+
+	/* set controller to Stop */
+	tmp = fsl_readl(&dr_regs->usbcmd);
+	tmp &= ~USB_CMD_RUN_STOP;
+	fsl_writel(tmp, &dr_regs->usbcmd);
+}
+
+static void dr_ep_setup(unsigned char ep_num, unsigned char dir,
+			unsigned char ep_type)
+{
+	unsigned int tmp_epctrl = 0;
+
+	tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
+	if (dir) {
+		if (ep_num)
+			tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST;
+		tmp_epctrl |= EPCTRL_TX_ENABLE;
+		tmp_epctrl &= ~EPCTRL_TX_TYPE;
+		tmp_epctrl |= ((unsigned int)(ep_type)
+				<< EPCTRL_TX_EP_TYPE_SHIFT);
+	} else {
+		if (ep_num)
+			tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST;
+		tmp_epctrl |= EPCTRL_RX_ENABLE;
+		tmp_epctrl &= ~EPCTRL_RX_TYPE;
+		tmp_epctrl |= ((unsigned int)(ep_type)
+				<< EPCTRL_RX_EP_TYPE_SHIFT);
+	}
+
+	fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]);
+}
+
+static void
+dr_ep_change_stall(unsigned char ep_num, unsigned char dir, int value)
+{
+	u32 tmp_epctrl = 0;
+
+	tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
+
+	if (value) {
+		/* set the stall bit */
+		if (dir)
+			tmp_epctrl |= EPCTRL_TX_EP_STALL;
+		else
+			tmp_epctrl |= EPCTRL_RX_EP_STALL;
+	} else {
+		/* clear the stall bit and reset data toggle */
+		if (dir) {
+			tmp_epctrl &= ~EPCTRL_TX_EP_STALL;
+			tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST;
+		} else {
+			tmp_epctrl &= ~EPCTRL_RX_EP_STALL;
+			tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST;
+		}
+	}
+	fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]);
+}
+
+/* Get stall status of a specific ep
+   Return: 0: not stalled; 1:stalled */
+static int dr_ep_get_stall(unsigned char ep_num, unsigned char dir)
+{
+	u32 epctrl;
+
+	epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
+	if (dir)
+		return (epctrl & EPCTRL_TX_EP_STALL) ? 1 : 0;
+	else
+		return (epctrl & EPCTRL_RX_EP_STALL) ? 1 : 0;
+}
+
+/********************************************************************
+	Internal Structure Build up functions
+********************************************************************/
+
+/*------------------------------------------------------------------
+* struct_ep_qh_setup(): set the Endpoint Capabilites field of QH
+ * @zlt: Zero Length Termination Select (1: disable; 0: enable)
+ * @mult: Mult field
+ ------------------------------------------------------------------*/
+static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num,
+		unsigned char dir, unsigned char ep_type,
+		unsigned int max_pkt_len,
+		unsigned int zlt, unsigned char mult)
+{
+	struct ep_queue_head *p_QH = &udc->ep_qh[2 * ep_num + dir];
+	unsigned int tmp = 0;
+
+	/* set the Endpoint Capabilites in QH */
+	switch (ep_type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* Interrupt On Setup (IOS). for control ep  */
+		tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
+			| EP_QUEUE_HEAD_IOS;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
+			| (mult << EP_QUEUE_HEAD_MULT_POS);
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_INT:
+		tmp = max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS;
+		break;
+	default:
+		VDBG("error ep type is %d", ep_type);
+		return;
+	}
+	if (zlt)
+		tmp |= EP_QUEUE_HEAD_ZLT_SEL;
+
+	p_QH->max_pkt_length = cpu_to_hc32(tmp);
+	p_QH->next_dtd_ptr = 1;
+	p_QH->size_ioc_int_sts = 0;
+}
+
+/* Setup qh structure and ep register for ep0. */
+static void ep0_setup(struct fsl_udc *udc)
+{
+	/* the initialization of an ep includes: fields in QH, Regs,
+	 * fsl_ep struct */
+	struct_ep_qh_setup(udc, 0, USB_RECV, USB_ENDPOINT_XFER_CONTROL,
+			USB_MAX_CTRL_PAYLOAD, 0, 0);
+	struct_ep_qh_setup(udc, 0, USB_SEND, USB_ENDPOINT_XFER_CONTROL,
+			USB_MAX_CTRL_PAYLOAD, 0, 0);
+	dr_ep_setup(0, USB_RECV, USB_ENDPOINT_XFER_CONTROL);
+	dr_ep_setup(0, USB_SEND, USB_ENDPOINT_XFER_CONTROL);
+
+	return;
+
+}
+
+/***********************************************************************
+		Endpoint Management Functions
+***********************************************************************/
+
+/*-------------------------------------------------------------------------
+ * when configurations are set, or when interface settings change
+ * for example the do_set_interface() in gadget layer,
+ * the driver will enable or disable the relevant endpoints
+ * ep0 doesn't use this routine. It is always enabled.
+-------------------------------------------------------------------------*/
+static int fsl_ep_enable(struct usb_ep *_ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct fsl_udc *udc = NULL;
+	struct fsl_ep *ep = NULL;
+	unsigned short max = 0;
+	unsigned char mult = 0, zlt;
+	int retval = -EINVAL;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct fsl_ep, ep);
+
+	/* catch various bogus parameters */
+	if (!_ep || !desc
+			|| (desc->bDescriptorType != USB_DT_ENDPOINT))
+		return -EINVAL;
+
+	udc = ep->udc;
+
+	if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+
+	max = usb_endpoint_maxp(desc);
+
+	/* Disable automatic zlp generation.  Driver is responsible to indicate
+	 * explicitly through req->req.zero.  This is needed to enable multi-td
+	 * request. */
+	zlt = 1;
+
+	/* Assume the max packet size from gadget is always correct */
+	switch (desc->bmAttributes & 0x03) {
+	case USB_ENDPOINT_XFER_CONTROL:
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_INT:
+		/* mult = 0.  Execute N Transactions as demonstrated by
+		 * the USB variable length packet protocol where N is
+		 * computed using the Maximum Packet Length (dQH) and
+		 * the Total Bytes field (dTD) */
+		mult = 0;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		/* Calculate transactions needed for high bandwidth iso */
+		mult = usb_endpoint_maxp_mult(desc);
+		/* 3 transactions at most */
+		if (mult > 3)
+			goto en_done;
+		break;
+	default:
+		goto en_done;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	ep->ep.maxpacket = max;
+	ep->ep.desc = desc;
+	ep->stopped = 0;
+
+	/* Controller related setup */
+	/* Init EPx Queue Head (Ep Capabilites field in QH
+	 * according to max, zlt, mult) */
+	struct_ep_qh_setup(udc, (unsigned char) ep_index(ep),
+			(unsigned char) ((desc->bEndpointAddress & USB_DIR_IN)
+					?  USB_SEND : USB_RECV),
+			(unsigned char) (desc->bmAttributes
+					& USB_ENDPOINT_XFERTYPE_MASK),
+			max, zlt, mult);
+
+	/* Init endpoint ctrl register */
+	dr_ep_setup((unsigned char) ep_index(ep),
+			(unsigned char) ((desc->bEndpointAddress & USB_DIR_IN)
+					? USB_SEND : USB_RECV),
+			(unsigned char) (desc->bmAttributes
+					& USB_ENDPOINT_XFERTYPE_MASK));
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	retval = 0;
+
+	VDBG("enabled %s (ep%d%s) maxpacket %d",ep->ep.name,
+			ep->ep.desc->bEndpointAddress & 0x0f,
+			(desc->bEndpointAddress & USB_DIR_IN)
+				? "in" : "out", max);
+en_done:
+	return retval;
+}
+
+/*---------------------------------------------------------------------
+ * @ep : the ep being unconfigured. May not be ep0
+ * Any pending and uncomplete req will complete with status (-ESHUTDOWN)
+*---------------------------------------------------------------------*/
+static int fsl_ep_disable(struct usb_ep *_ep)
+{
+	struct fsl_udc *udc = NULL;
+	struct fsl_ep *ep = NULL;
+	unsigned long flags;
+	u32 epctrl;
+	int ep_num;
+
+	ep = container_of(_ep, struct fsl_ep, ep);
+	if (!_ep || !ep->ep.desc) {
+		VDBG("%s not enabled", _ep ? ep->ep.name : NULL);
+		return -EINVAL;
+	}
+
+	/* disable ep on controller */
+	ep_num = ep_index(ep);
+	epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
+	if (ep_is_in(ep)) {
+		epctrl &= ~(EPCTRL_TX_ENABLE | EPCTRL_TX_TYPE);
+		epctrl |= EPCTRL_EP_TYPE_BULK << EPCTRL_TX_EP_TYPE_SHIFT;
+	} else {
+		epctrl &= ~(EPCTRL_RX_ENABLE | EPCTRL_TX_TYPE);
+		epctrl |= EPCTRL_EP_TYPE_BULK << EPCTRL_RX_EP_TYPE_SHIFT;
+	}
+	fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
+
+	udc = (struct fsl_udc *)ep->udc;
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* nuke all pending requests (does flush) */
+	nuke(ep, -ESHUTDOWN);
+
+	ep->ep.desc = NULL;
+	ep->stopped = 1;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	VDBG("disabled %s OK", _ep->name);
+	return 0;
+}
+
+/*---------------------------------------------------------------------
+ * allocate a request object used by this endpoint
+ * the main operation is to insert the req->queue to the eq->queue
+ * Returns the request, or null if one could not be allocated
+*---------------------------------------------------------------------*/
+static struct usb_request *
+fsl_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct fsl_req *req = NULL;
+
+	req = kzalloc(sizeof *req, gfp_flags);
+	if (!req)
+		return NULL;
+
+	req->req.dma = DMA_ADDR_INVALID;
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void fsl_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct fsl_req *req = NULL;
+
+	req = container_of(_req, struct fsl_req, req);
+
+	if (_req)
+		kfree(req);
+}
+
+/* Actually add a dTD chain to an empty dQH and let go */
+static void fsl_prime_ep(struct fsl_ep *ep, struct ep_td_struct *td)
+{
+	struct ep_queue_head *qh = get_qh_by_ep(ep);
+
+	/* Write dQH next pointer and terminate bit to 0 */
+	qh->next_dtd_ptr = cpu_to_hc32(td->td_dma
+			& EP_QUEUE_HEAD_NEXT_POINTER_MASK);
+
+	/* Clear active and halt bit */
+	qh->size_ioc_int_sts &= cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE
+					| EP_QUEUE_HEAD_STATUS_HALT));
+
+	/* Ensure that updates to the QH will occur before priming. */
+	wmb();
+
+	/* Prime endpoint by writing correct bit to ENDPTPRIME */
+	fsl_writel(ep_is_in(ep) ? (1 << (ep_index(ep) + 16))
+			: (1 << (ep_index(ep))), &dr_regs->endpointprime);
+}
+
+/* Add dTD chain to the dQH of an EP */
+static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
+{
+	u32 temp, bitmask, tmp_stat;
+
+	/* VDBG("QH addr Register 0x%8x", dr_regs->endpointlistaddr);
+	VDBG("ep_qh[%d] addr is 0x%8x", i, (u32)&(ep->udc->ep_qh[i])); */
+
+	bitmask = ep_is_in(ep)
+		? (1 << (ep_index(ep) + 16))
+		: (1 << (ep_index(ep)));
+
+	/* check if the pipe is empty */
+	if (!(list_empty(&ep->queue)) && !(ep_index(ep) == 0)) {
+		/* Add td to the end */
+		struct fsl_req *lastreq;
+		lastreq = list_entry(ep->queue.prev, struct fsl_req, queue);
+		lastreq->tail->next_td_ptr =
+			cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK);
+		/* Ensure dTD's next dtd pointer to be updated */
+		wmb();
+		/* Read prime bit, if 1 goto done */
+		if (fsl_readl(&dr_regs->endpointprime) & bitmask)
+			return;
+
+		do {
+			/* Set ATDTW bit in USBCMD */
+			temp = fsl_readl(&dr_regs->usbcmd);
+			fsl_writel(temp | USB_CMD_ATDTW, &dr_regs->usbcmd);
+
+			/* Read correct status bit */
+			tmp_stat = fsl_readl(&dr_regs->endptstatus) & bitmask;
+
+		} while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_ATDTW));
+
+		/* Write ATDTW bit to 0 */
+		temp = fsl_readl(&dr_regs->usbcmd);
+		fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd);
+
+		if (tmp_stat)
+			return;
+	}
+
+	fsl_prime_ep(ep, req->head);
+}
+
+/* Fill in the dTD structure
+ * @req: request that the transfer belongs to
+ * @length: return actually data length of the dTD
+ * @dma: return dma address of the dTD
+ * @is_last: return flag if it is the last dTD of the request
+ * return: pointer to the built dTD */
+static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
+		dma_addr_t *dma, int *is_last, gfp_t gfp_flags)
+{
+	u32 swap_temp;
+	struct ep_td_struct *dtd;
+
+	/* how big will this transfer be? */
+	*length = min(req->req.length - req->req.actual,
+			(unsigned)EP_MAX_LENGTH_TRANSFER);
+
+	dtd = dma_pool_alloc(udc_controller->td_pool, gfp_flags, dma);
+	if (dtd == NULL)
+		return dtd;
+
+	dtd->td_dma = *dma;
+	/* Clear reserved field */
+	swap_temp = hc32_to_cpu(dtd->size_ioc_sts);
+	swap_temp &= ~DTD_RESERVED_FIELDS;
+	dtd->size_ioc_sts = cpu_to_hc32(swap_temp);
+
+	/* Init all of buffer page pointers */
+	swap_temp = (u32) (req->req.dma + req->req.actual);
+	dtd->buff_ptr0 = cpu_to_hc32(swap_temp);
+	dtd->buff_ptr1 = cpu_to_hc32(swap_temp + 0x1000);
+	dtd->buff_ptr2 = cpu_to_hc32(swap_temp + 0x2000);
+	dtd->buff_ptr3 = cpu_to_hc32(swap_temp + 0x3000);
+	dtd->buff_ptr4 = cpu_to_hc32(swap_temp + 0x4000);
+
+	req->req.actual += *length;
+
+	/* zlp is needed if req->req.zero is set */
+	if (req->req.zero) {
+		if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
+			*is_last = 1;
+		else
+			*is_last = 0;
+	} else if (req->req.length == req->req.actual)
+		*is_last = 1;
+	else
+		*is_last = 0;
+
+	if ((*is_last) == 0)
+		VDBG("multi-dtd request!");
+	/* Fill in the transfer size; set active bit */
+	swap_temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE);
+
+	/* Enable interrupt for the last dtd of a request */
+	if (*is_last && !req->req.no_interrupt)
+		swap_temp |= DTD_IOC;
+
+	dtd->size_ioc_sts = cpu_to_hc32(swap_temp);
+
+	mb();
+
+	VDBG("length = %d address= 0x%x", *length, (int)*dma);
+
+	return dtd;
+}
+
+/* Generate dtd chain for a request */
+static int fsl_req_to_dtd(struct fsl_req *req, gfp_t gfp_flags)
+{
+	unsigned	count;
+	int		is_last;
+	int		is_first =1;
+	struct ep_td_struct	*last_dtd = NULL, *dtd;
+	dma_addr_t dma;
+
+	do {
+		dtd = fsl_build_dtd(req, &count, &dma, &is_last, gfp_flags);
+		if (dtd == NULL)
+			return -ENOMEM;
+
+		if (is_first) {
+			is_first = 0;
+			req->head = dtd;
+		} else {
+			last_dtd->next_td_ptr = cpu_to_hc32(dma);
+			last_dtd->next_td_virt = dtd;
+		}
+		last_dtd = dtd;
+
+		req->dtd_count++;
+	} while (!is_last);
+
+	dtd->next_td_ptr = cpu_to_hc32(DTD_NEXT_TERMINATE);
+
+	req->tail = dtd;
+
+	return 0;
+}
+
+/* queues (submits) an I/O request to an endpoint */
+static int
+fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep);
+	struct fsl_req *req = container_of(_req, struct fsl_req, req);
+	struct fsl_udc *udc;
+	unsigned long flags;
+	int ret;
+
+	/* catch various bogus parameters */
+	if (!_req || !req->req.complete || !req->req.buf
+			|| !list_empty(&req->queue)) {
+		VDBG("%s, bad params", __func__);
+		return -EINVAL;
+	}
+	if (unlikely(!_ep || !ep->ep.desc)) {
+		VDBG("%s, bad ep", __func__);
+		return -EINVAL;
+	}
+	if (usb_endpoint_xfer_isoc(ep->ep.desc)) {
+		if (req->req.length > ep->ep.maxpacket)
+			return -EMSGSIZE;
+	}
+
+	udc = ep->udc;
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	req->ep = ep;
+
+	ret = usb_gadget_map_request(&ep->udc->gadget, &req->req, ep_is_in(ep));
+	if (ret)
+		return ret;
+
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+	req->dtd_count = 0;
+
+	/* build dtds and push them to device queue */
+	if (!fsl_req_to_dtd(req, gfp_flags)) {
+		spin_lock_irqsave(&udc->lock, flags);
+		fsl_queue_td(ep, req);
+	} else {
+		return -ENOMEM;
+	}
+
+	/* irq handler advances the queue */
+	if (req != NULL)
+		list_add_tail(&req->queue, &ep->queue);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/* dequeues (cancels, unlinks) an I/O request from an endpoint */
+static int fsl_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep);
+	struct fsl_req *req = NULL;
+	struct fsl_req *iter;
+	unsigned long flags;
+	int ep_num, stopped, ret = 0;
+	u32 epctrl;
+
+	if (!_ep || !_req)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+	stopped = ep->stopped;
+
+	/* Stop the ep before we deal with the queue */
+	ep->stopped = 1;
+	ep_num = ep_index(ep);
+	epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
+	if (ep_is_in(ep))
+		epctrl &= ~EPCTRL_TX_ENABLE;
+	else
+		epctrl &= ~EPCTRL_RX_ENABLE;
+	fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		req = iter;
+		break;
+	}
+	if (!req) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* The request is in progress, or completed but not dequeued */
+	if (ep->queue.next == &req->queue) {
+		_req->status = -ECONNRESET;
+		fsl_ep_fifo_flush(_ep);	/* flush current transfer */
+
+		/* The request isn't the last request in this ep queue */
+		if (req->queue.next != &ep->queue) {
+			struct fsl_req *next_req;
+
+			next_req = list_entry(req->queue.next, struct fsl_req,
+					queue);
+
+			/* prime with dTD of next request */
+			fsl_prime_ep(ep, next_req->head);
+		}
+	/* The request hasn't been processed, patch up the TD chain */
+	} else {
+		struct fsl_req *prev_req;
+
+		prev_req = list_entry(req->queue.prev, struct fsl_req, queue);
+		prev_req->tail->next_td_ptr = req->tail->next_td_ptr;
+	}
+
+	done(ep, req, -ECONNRESET);
+
+	/* Enable EP */
+out:	epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
+	if (ep_is_in(ep))
+		epctrl |= EPCTRL_TX_ENABLE;
+	else
+		epctrl |= EPCTRL_RX_ENABLE;
+	fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
+	ep->stopped = stopped;
+
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*-----------------------------------------------------------------
+ * modify the endpoint halt feature
+ * @ep: the non-isochronous endpoint being stalled
+ * @value: 1--set halt  0--clear halt
+ * Returns zero, or a negative error code.
+*----------------------------------------------------------------*/
+static int fsl_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	struct fsl_ep *ep = NULL;
+	unsigned long flags;
+	int status = -EOPNOTSUPP;	/* operation not supported */
+	unsigned char ep_dir = 0, ep_num = 0;
+	struct fsl_udc *udc = NULL;
+
+	ep = container_of(_ep, struct fsl_ep, ep);
+	udc = ep->udc;
+	if (!_ep || !ep->ep.desc) {
+		status = -EINVAL;
+		goto out;
+	}
+
+	if (usb_endpoint_xfer_isoc(ep->ep.desc)) {
+		status = -EOPNOTSUPP;
+		goto out;
+	}
+
+	/* Attempt to halt IN ep will fail if any transfer requests
+	 * are still queue */
+	if (value && ep_is_in(ep) && !list_empty(&ep->queue)) {
+		status = -EAGAIN;
+		goto out;
+	}
+
+	status = 0;
+	ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV;
+	ep_num = (unsigned char)(ep_index(ep));
+	spin_lock_irqsave(&ep->udc->lock, flags);
+	dr_ep_change_stall(ep_num, ep_dir, value);
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+
+	if (ep_index(ep) == 0) {
+		udc->ep0_state = WAIT_FOR_SETUP;
+		udc->ep0_dir = 0;
+	}
+out:
+	VDBG(" %s %s halt stat %d", ep->ep.name,
+			value ?  "set" : "clear", status);
+
+	return status;
+}
+
+static int fsl_ep_fifo_status(struct usb_ep *_ep)
+{
+	struct fsl_ep *ep;
+	struct fsl_udc *udc;
+	int size = 0;
+	u32 bitmask;
+	struct ep_queue_head *qh;
+
+	if (!_ep || !_ep->desc || !(_ep->desc->bEndpointAddress&0xF))
+		return -ENODEV;
+
+	ep = container_of(_ep, struct fsl_ep, ep);
+
+	udc = (struct fsl_udc *)ep->udc;
+
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	qh = get_qh_by_ep(ep);
+
+	bitmask = (ep_is_in(ep)) ? (1 << (ep_index(ep) + 16)) :
+	    (1 << (ep_index(ep)));
+
+	if (fsl_readl(&dr_regs->endptstatus) & bitmask)
+		size = (qh->size_ioc_int_sts & DTD_PACKET_SIZE)
+		    >> DTD_LENGTH_BIT_POS;
+
+	pr_debug("%s %u\n", __func__, size);
+	return size;
+}
+
+static void fsl_ep_fifo_flush(struct usb_ep *_ep)
+{
+	struct fsl_ep *ep;
+	int ep_num, ep_dir;
+	u32 bits;
+	unsigned long timeout;
+#define FSL_UDC_FLUSH_TIMEOUT 1000
+
+	if (!_ep) {
+		return;
+	} else {
+		ep = container_of(_ep, struct fsl_ep, ep);
+		if (!ep->ep.desc)
+			return;
+	}
+	ep_num = ep_index(ep);
+	ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV;
+
+	if (ep_num == 0)
+		bits = (1 << 16) | 1;
+	else if (ep_dir == USB_SEND)
+		bits = 1 << (16 + ep_num);
+	else
+		bits = 1 << ep_num;
+
+	timeout = jiffies + FSL_UDC_FLUSH_TIMEOUT;
+	do {
+		fsl_writel(bits, &dr_regs->endptflush);
+
+		/* Wait until flush complete */
+		while (fsl_readl(&dr_regs->endptflush)) {
+			if (time_after(jiffies, timeout)) {
+				ERR("ep flush timeout\n");
+				return;
+			}
+			cpu_relax();
+		}
+		/* See if we need to flush again */
+	} while (fsl_readl(&dr_regs->endptstatus) & bits);
+}
+
+static const struct usb_ep_ops fsl_ep_ops = {
+	.enable = fsl_ep_enable,
+	.disable = fsl_ep_disable,
+
+	.alloc_request = fsl_alloc_request,
+	.free_request = fsl_free_request,
+
+	.queue = fsl_ep_queue,
+	.dequeue = fsl_ep_dequeue,
+
+	.set_halt = fsl_ep_set_halt,
+	.fifo_status = fsl_ep_fifo_status,
+	.fifo_flush = fsl_ep_fifo_flush,	/* flush fifo */
+};
+
+/*-------------------------------------------------------------------------
+		Gadget Driver Layer Operations
+-------------------------------------------------------------------------*/
+
+/*----------------------------------------------------------------------
+ * Get the current frame number (from DR frame_index Reg )
+ *----------------------------------------------------------------------*/
+static int fsl_get_frame(struct usb_gadget *gadget)
+{
+	return (int)(fsl_readl(&dr_regs->frindex) & USB_FRINDEX_MASKS);
+}
+
+/*-----------------------------------------------------------------------
+ * Tries to wake up the host connected to this gadget
+ -----------------------------------------------------------------------*/
+static int fsl_wakeup(struct usb_gadget *gadget)
+{
+	struct fsl_udc *udc = container_of(gadget, struct fsl_udc, gadget);
+	u32 portsc;
+
+	/* Remote wakeup feature not enabled by host */
+	if (!udc->remote_wakeup)
+		return -ENOTSUPP;
+
+	portsc = fsl_readl(&dr_regs->portsc1);
+	/* not suspended? */
+	if (!(portsc & PORTSCX_PORT_SUSPEND))
+		return 0;
+	/* trigger force resume */
+	portsc |= PORTSCX_PORT_FORCE_RESUME;
+	fsl_writel(portsc, &dr_regs->portsc1);
+	return 0;
+}
+
+static int can_pullup(struct fsl_udc *udc)
+{
+	return udc->driver && udc->softconnect && udc->vbus_active;
+}
+
+/* Notify controller that VBUS is powered, Called by whatever
+   detects VBUS sessions */
+static int fsl_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct fsl_udc	*udc;
+	unsigned long	flags;
+
+	udc = container_of(gadget, struct fsl_udc, gadget);
+	spin_lock_irqsave(&udc->lock, flags);
+	VDBG("VBUS %s", is_active ? "on" : "off");
+	udc->vbus_active = (is_active != 0);
+	if (can_pullup(udc))
+		fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
+				&dr_regs->usbcmd);
+	else
+		fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP),
+				&dr_regs->usbcmd);
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/* constrain controller's VBUS power usage
+ * This call is used by gadget drivers during SET_CONFIGURATION calls,
+ * reporting how much power the device may consume.  For example, this
+ * could affect how quickly batteries are recharged.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	struct fsl_udc *udc;
+
+	udc = container_of(gadget, struct fsl_udc, gadget);
+	if (!IS_ERR_OR_NULL(udc->transceiver))
+		return usb_phy_set_power(udc->transceiver, mA);
+	return -ENOTSUPP;
+}
+
+/* Change Data+ pullup status
+ * this func is used by usb_gadget_connect/disconnect
+ */
+static int fsl_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct fsl_udc *udc;
+
+	udc = container_of(gadget, struct fsl_udc, gadget);
+
+	if (!udc->vbus_active)
+		return -EOPNOTSUPP;
+
+	udc->softconnect = (is_on != 0);
+	if (can_pullup(udc))
+		fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
+				&dr_regs->usbcmd);
+	else
+		fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP),
+				&dr_regs->usbcmd);
+
+	return 0;
+}
+
+static int fsl_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+static int fsl_udc_stop(struct usb_gadget *g);
+
+static const struct usb_gadget_ops fsl_gadget_ops = {
+	.get_frame = fsl_get_frame,
+	.wakeup = fsl_wakeup,
+/*	.set_selfpowered = fsl_set_selfpowered,	*/ /* Always selfpowered */
+	.vbus_session = fsl_vbus_session,
+	.vbus_draw = fsl_vbus_draw,
+	.pullup = fsl_pullup,
+	.udc_start = fsl_udc_start,
+	.udc_stop = fsl_udc_stop,
+};
+
+/*
+ * Empty complete function used by this driver to fill in the req->complete
+ * field when creating a request since the complete field is mandatory.
+ */
+static void fsl_noop_complete(struct usb_ep *ep, struct usb_request *req) { }
+
+/* Set protocol stall on ep0, protocol stall will automatically be cleared
+   on new transaction */
+static void ep0stall(struct fsl_udc *udc)
+{
+	u32 tmp;
+
+	/* must set tx and rx to stall at the same time */
+	tmp = fsl_readl(&dr_regs->endptctrl[0]);
+	tmp |= EPCTRL_TX_EP_STALL | EPCTRL_RX_EP_STALL;
+	fsl_writel(tmp, &dr_regs->endptctrl[0]);
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->ep0_dir = 0;
+}
+
+/* Prime a status phase for ep0 */
+static int ep0_prime_status(struct fsl_udc *udc, int direction)
+{
+	struct fsl_req *req = udc->status_req;
+	struct fsl_ep *ep;
+	int ret;
+
+	if (direction == EP_DIR_IN)
+		udc->ep0_dir = USB_DIR_IN;
+	else
+		udc->ep0_dir = USB_DIR_OUT;
+
+	ep = &udc->eps[0];
+	if (udc->ep0_state != DATA_STATE_XMIT)
+		udc->ep0_state = WAIT_FOR_OUT_STATUS;
+
+	req->ep = ep;
+	req->req.length = 0;
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+	req->req.complete = fsl_noop_complete;
+	req->dtd_count = 0;
+
+	ret = usb_gadget_map_request(&ep->udc->gadget, &req->req, ep_is_in(ep));
+	if (ret)
+		return ret;
+
+	if (fsl_req_to_dtd(req, GFP_ATOMIC) == 0)
+		fsl_queue_td(ep, req);
+	else
+		return -ENOMEM;
+
+	list_add_tail(&req->queue, &ep->queue);
+
+	return 0;
+}
+
+static void udc_reset_ep_queue(struct fsl_udc *udc, u8 pipe)
+{
+	struct fsl_ep *ep = get_ep_by_pipe(udc, pipe);
+
+	if (ep->ep.name)
+		nuke(ep, -ESHUTDOWN);
+}
+
+/*
+ * ch9 Set address
+ */
+static void ch9setaddress(struct fsl_udc *udc, u16 value, u16 index, u16 length)
+{
+	/* Save the new address to device struct */
+	udc->device_address = (u8) value;
+	/* Update usb state */
+	udc->usb_state = USB_STATE_ADDRESS;
+	/* Status phase */
+	if (ep0_prime_status(udc, EP_DIR_IN))
+		ep0stall(udc);
+}
+
+/*
+ * ch9 Get status
+ */
+static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
+		u16 index, u16 length)
+{
+	u16 tmp = 0;		/* Status, cpu endian */
+	struct fsl_req *req;
+	struct fsl_ep *ep;
+	int ret;
+
+	ep = &udc->eps[0];
+
+	if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
+		/* Get device status */
+		tmp = udc->gadget.is_selfpowered;
+		tmp |= udc->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+	} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
+		/* Get interface status */
+		/* We don't have interface information in udc driver */
+		tmp = 0;
+	} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
+		/* Get endpoint status */
+		struct fsl_ep *target_ep;
+
+		target_ep = get_ep_by_pipe(udc, get_pipe_by_windex(index));
+
+		/* stall if endpoint doesn't exist */
+		if (!target_ep->ep.desc)
+			goto stall;
+		tmp = dr_ep_get_stall(ep_index(target_ep), ep_is_in(target_ep))
+				<< USB_ENDPOINT_HALT;
+	}
+
+	udc->ep0_dir = USB_DIR_IN;
+	/* Borrow the per device status_req */
+	req = udc->status_req;
+	/* Fill in the reqest structure */
+	*((u16 *) req->req.buf) = cpu_to_le16(tmp);
+
+	req->ep = ep;
+	req->req.length = 2;
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+	req->req.complete = fsl_noop_complete;
+	req->dtd_count = 0;
+
+	ret = usb_gadget_map_request(&ep->udc->gadget, &req->req, ep_is_in(ep));
+	if (ret)
+		goto stall;
+
+	/* prime the data phase */
+	if ((fsl_req_to_dtd(req, GFP_ATOMIC) == 0))
+		fsl_queue_td(ep, req);
+	else			/* no mem */
+		goto stall;
+
+	list_add_tail(&req->queue, &ep->queue);
+	udc->ep0_state = DATA_STATE_XMIT;
+	if (ep0_prime_status(udc, EP_DIR_OUT))
+		ep0stall(udc);
+
+	return;
+stall:
+	ep0stall(udc);
+}
+
+static void setup_received_irq(struct fsl_udc *udc,
+		struct usb_ctrlrequest *setup)
+__releases(udc->lock)
+__acquires(udc->lock)
+{
+	u16 wValue = le16_to_cpu(setup->wValue);
+	u16 wIndex = le16_to_cpu(setup->wIndex);
+	u16 wLength = le16_to_cpu(setup->wLength);
+
+	udc_reset_ep_queue(udc, 0);
+
+	/* We process some stardard setup requests here */
+	switch (setup->bRequest) {
+	case USB_REQ_GET_STATUS:
+		/* Data+Status phase from udc */
+		if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
+					!= (USB_DIR_IN | USB_TYPE_STANDARD))
+			break;
+		ch9getstatus(udc, setup->bRequestType, wValue, wIndex, wLength);
+		return;
+
+	case USB_REQ_SET_ADDRESS:
+		/* Status phase from udc */
+		if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
+						| USB_RECIP_DEVICE))
+			break;
+		ch9setaddress(udc, wValue, wIndex, wLength);
+		return;
+
+	case USB_REQ_CLEAR_FEATURE:
+	case USB_REQ_SET_FEATURE:
+		/* Status phase from udc */
+	{
+		int rc = -EOPNOTSUPP;
+		u16 ptc = 0;
+
+		if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
+				== (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
+			int pipe = get_pipe_by_windex(wIndex);
+			struct fsl_ep *ep;
+
+			if (wValue != 0 || wLength != 0 || pipe >= udc->max_ep)
+				break;
+			ep = get_ep_by_pipe(udc, pipe);
+
+			spin_unlock(&udc->lock);
+			rc = fsl_ep_set_halt(&ep->ep,
+					(setup->bRequest == USB_REQ_SET_FEATURE)
+						? 1 : 0);
+			spin_lock(&udc->lock);
+
+		} else if ((setup->bRequestType & (USB_RECIP_MASK
+				| USB_TYPE_MASK)) == (USB_RECIP_DEVICE
+				| USB_TYPE_STANDARD)) {
+			/* Note: The driver has not include OTG support yet.
+			 * This will be set when OTG support is added */
+			if (wValue == USB_DEVICE_TEST_MODE)
+				ptc = wIndex >> 8;
+			else if (gadget_is_otg(&udc->gadget)) {
+				if (setup->bRequest ==
+				    USB_DEVICE_B_HNP_ENABLE)
+					udc->gadget.b_hnp_enable = 1;
+				else if (setup->bRequest ==
+					 USB_DEVICE_A_HNP_SUPPORT)
+					udc->gadget.a_hnp_support = 1;
+				else if (setup->bRequest ==
+					 USB_DEVICE_A_ALT_HNP_SUPPORT)
+					udc->gadget.a_alt_hnp_support = 1;
+			}
+			rc = 0;
+		} else
+			break;
+
+		if (rc == 0) {
+			if (ep0_prime_status(udc, EP_DIR_IN))
+				ep0stall(udc);
+		}
+		if (ptc) {
+			u32 tmp;
+
+			mdelay(10);
+			tmp = fsl_readl(&dr_regs->portsc1) | (ptc << 16);
+			fsl_writel(tmp, &dr_regs->portsc1);
+			printk(KERN_INFO "udc: switch to test mode %d.\n", ptc);
+		}
+
+		return;
+	}
+
+	default:
+		break;
+	}
+
+	/* Requests handled by gadget */
+	if (wLength) {
+		/* Data phase from gadget, status phase from udc */
+		udc->ep0_dir = (setup->bRequestType & USB_DIR_IN)
+				?  USB_DIR_IN : USB_DIR_OUT;
+		spin_unlock(&udc->lock);
+		if (udc->driver->setup(&udc->gadget,
+				&udc->local_setup_buff) < 0)
+			ep0stall(udc);
+		spin_lock(&udc->lock);
+		udc->ep0_state = (setup->bRequestType & USB_DIR_IN)
+				?  DATA_STATE_XMIT : DATA_STATE_RECV;
+		/*
+		 * If the data stage is IN, send status prime immediately.
+		 * See 2.0 Spec chapter 8.5.3.3 for detail.
+		 */
+		if (udc->ep0_state == DATA_STATE_XMIT)
+			if (ep0_prime_status(udc, EP_DIR_OUT))
+				ep0stall(udc);
+
+	} else {
+		/* No data phase, IN status from gadget */
+		udc->ep0_dir = USB_DIR_IN;
+		spin_unlock(&udc->lock);
+		if (udc->driver->setup(&udc->gadget,
+				&udc->local_setup_buff) < 0)
+			ep0stall(udc);
+		spin_lock(&udc->lock);
+		udc->ep0_state = WAIT_FOR_OUT_STATUS;
+	}
+}
+
+/* Process request for Data or Status phase of ep0
+ * prime status phase if needed */
+static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0,
+		struct fsl_req *req)
+{
+	if (udc->usb_state == USB_STATE_ADDRESS) {
+		/* Set the new address */
+		u32 new_address = (u32) udc->device_address;
+		fsl_writel(new_address << USB_DEVICE_ADDRESS_BIT_POS,
+				&dr_regs->deviceaddr);
+	}
+
+	done(ep0, req, 0);
+
+	switch (udc->ep0_state) {
+	case DATA_STATE_XMIT:
+		/* already primed at setup_received_irq */
+		udc->ep0_state = WAIT_FOR_OUT_STATUS;
+		break;
+	case DATA_STATE_RECV:
+		/* send status phase */
+		if (ep0_prime_status(udc, EP_DIR_IN))
+			ep0stall(udc);
+		break;
+	case WAIT_FOR_OUT_STATUS:
+		udc->ep0_state = WAIT_FOR_SETUP;
+		break;
+	case WAIT_FOR_SETUP:
+		ERR("Unexpected ep0 packets\n");
+		break;
+	default:
+		ep0stall(udc);
+		break;
+	}
+}
+
+/* Tripwire mechanism to ensure a setup packet payload is extracted without
+ * being corrupted by another incoming setup packet */
+static void tripwire_handler(struct fsl_udc *udc, u8 ep_num, u8 *buffer_ptr)
+{
+	u32 temp;
+	struct ep_queue_head *qh;
+	struct fsl_usb2_platform_data *pdata = udc->pdata;
+
+	qh = &udc->ep_qh[ep_num * 2 + EP_DIR_OUT];
+
+	/* Clear bit in ENDPTSETUPSTAT */
+	temp = fsl_readl(&dr_regs->endptsetupstat);
+	fsl_writel(temp | (1 << ep_num), &dr_regs->endptsetupstat);
+
+	/* while a hazard exists when setup package arrives */
+	do {
+		/* Set Setup Tripwire */
+		temp = fsl_readl(&dr_regs->usbcmd);
+		fsl_writel(temp | USB_CMD_SUTW, &dr_regs->usbcmd);
+
+		/* Copy the setup packet to local buffer */
+		if (pdata->le_setup_buf) {
+			u32 *p = (u32 *)buffer_ptr;
+			u32 *s = (u32 *)qh->setup_buffer;
+
+			/* Convert little endian setup buffer to CPU endian */
+			*p++ = le32_to_cpu(*s++);
+			*p = le32_to_cpu(*s);
+		} else {
+			memcpy(buffer_ptr, (u8 *) qh->setup_buffer, 8);
+		}
+	} while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_SUTW));
+
+	/* Clear Setup Tripwire */
+	temp = fsl_readl(&dr_regs->usbcmd);
+	fsl_writel(temp & ~USB_CMD_SUTW, &dr_regs->usbcmd);
+}
+
+/* process-ep_req(): free the completed Tds for this req */
+static int process_ep_req(struct fsl_udc *udc, int pipe,
+		struct fsl_req *curr_req)
+{
+	struct ep_td_struct *curr_td;
+	int	actual, remaining_length, j, tmp;
+	int	status = 0;
+	int	errors = 0;
+	struct  ep_queue_head *curr_qh = &udc->ep_qh[pipe];
+	int direction = pipe % 2;
+
+	curr_td = curr_req->head;
+	actual = curr_req->req.length;
+
+	for (j = 0; j < curr_req->dtd_count; j++) {
+		remaining_length = (hc32_to_cpu(curr_td->size_ioc_sts)
+					& DTD_PACKET_SIZE)
+				>> DTD_LENGTH_BIT_POS;
+		actual -= remaining_length;
+
+		errors = hc32_to_cpu(curr_td->size_ioc_sts);
+		if (errors & DTD_ERROR_MASK) {
+			if (errors & DTD_STATUS_HALTED) {
+				ERR("dTD error %08x QH=%d\n", errors, pipe);
+				/* Clear the errors and Halt condition */
+				tmp = hc32_to_cpu(curr_qh->size_ioc_int_sts);
+				tmp &= ~errors;
+				curr_qh->size_ioc_int_sts = cpu_to_hc32(tmp);
+				status = -EPIPE;
+				/* FIXME: continue with next queued TD? */
+
+				break;
+			}
+			if (errors & DTD_STATUS_DATA_BUFF_ERR) {
+				VDBG("Transfer overflow");
+				status = -EPROTO;
+				break;
+			} else if (errors & DTD_STATUS_TRANSACTION_ERR) {
+				VDBG("ISO error");
+				status = -EILSEQ;
+				break;
+			} else
+				ERR("Unknown error has occurred (0x%x)!\n",
+					errors);
+
+		} else if (hc32_to_cpu(curr_td->size_ioc_sts)
+				& DTD_STATUS_ACTIVE) {
+			VDBG("Request not complete");
+			status = REQ_UNCOMPLETE;
+			return status;
+		} else if (remaining_length) {
+			if (direction) {
+				VDBG("Transmit dTD remaining length not zero");
+				status = -EPROTO;
+				break;
+			} else {
+				break;
+			}
+		} else {
+			VDBG("dTD transmitted successful");
+		}
+
+		if (j != curr_req->dtd_count - 1)
+			curr_td = (struct ep_td_struct *)curr_td->next_td_virt;
+	}
+
+	if (status)
+		return status;
+
+	curr_req->req.actual = actual;
+
+	return 0;
+}
+
+/* Process a DTD completion interrupt */
+static void dtd_complete_irq(struct fsl_udc *udc)
+{
+	u32 bit_pos;
+	int i, ep_num, direction, bit_mask, status;
+	struct fsl_ep *curr_ep;
+	struct fsl_req *curr_req, *temp_req;
+
+	/* Clear the bits in the register */
+	bit_pos = fsl_readl(&dr_regs->endptcomplete);
+	fsl_writel(bit_pos, &dr_regs->endptcomplete);
+
+	if (!bit_pos)
+		return;
+
+	for (i = 0; i < udc->max_ep; i++) {
+		ep_num = i >> 1;
+		direction = i % 2;
+
+		bit_mask = 1 << (ep_num + 16 * direction);
+
+		if (!(bit_pos & bit_mask))
+			continue;
+
+		curr_ep = get_ep_by_pipe(udc, i);
+
+		/* If the ep is configured */
+		if (!curr_ep->ep.name) {
+			WARNING("Invalid EP?");
+			continue;
+		}
+
+		/* process the req queue until an uncomplete request */
+		list_for_each_entry_safe(curr_req, temp_req, &curr_ep->queue,
+				queue) {
+			status = process_ep_req(udc, i, curr_req);
+
+			VDBG("status of process_ep_req= %d, ep = %d",
+					status, ep_num);
+			if (status == REQ_UNCOMPLETE)
+				break;
+			/* write back status to req */
+			curr_req->req.status = status;
+
+			if (ep_num == 0) {
+				ep0_req_complete(udc, curr_ep, curr_req);
+				break;
+			} else
+				done(curr_ep, curr_req, status);
+		}
+	}
+}
+
+static inline enum usb_device_speed portscx_device_speed(u32 reg)
+{
+	switch (reg & PORTSCX_PORT_SPEED_MASK) {
+	case PORTSCX_PORT_SPEED_HIGH:
+		return USB_SPEED_HIGH;
+	case PORTSCX_PORT_SPEED_FULL:
+		return USB_SPEED_FULL;
+	case PORTSCX_PORT_SPEED_LOW:
+		return USB_SPEED_LOW;
+	default:
+		return USB_SPEED_UNKNOWN;
+	}
+}
+
+/* Process a port change interrupt */
+static void port_change_irq(struct fsl_udc *udc)
+{
+	if (udc->bus_reset)
+		udc->bus_reset = 0;
+
+	/* Bus resetting is finished */
+	if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET))
+		/* Get the speed */
+		udc->gadget.speed =
+			portscx_device_speed(fsl_readl(&dr_regs->portsc1));
+
+	/* Update USB state */
+	if (!udc->resume_state)
+		udc->usb_state = USB_STATE_DEFAULT;
+}
+
+/* Process suspend interrupt */
+static void suspend_irq(struct fsl_udc *udc)
+{
+	udc->resume_state = udc->usb_state;
+	udc->usb_state = USB_STATE_SUSPENDED;
+
+	/* report suspend to the driver, serial.c does not support this */
+	if (udc->driver->suspend)
+		udc->driver->suspend(&udc->gadget);
+}
+
+static void bus_resume(struct fsl_udc *udc)
+{
+	udc->usb_state = udc->resume_state;
+	udc->resume_state = 0;
+
+	/* report resume to the driver, serial.c does not support this */
+	if (udc->driver->resume)
+		udc->driver->resume(&udc->gadget);
+}
+
+/* Clear up all ep queues */
+static int reset_queues(struct fsl_udc *udc, bool bus_reset)
+{
+	u8 pipe;
+
+	for (pipe = 0; pipe < udc->max_pipes; pipe++)
+		udc_reset_ep_queue(udc, pipe);
+
+	/* report disconnect; the driver is already quiesced */
+	spin_unlock(&udc->lock);
+	if (bus_reset)
+		usb_gadget_udc_reset(&udc->gadget, udc->driver);
+	else
+		udc->driver->disconnect(&udc->gadget);
+	spin_lock(&udc->lock);
+
+	return 0;
+}
+
+/* Process reset interrupt */
+static void reset_irq(struct fsl_udc *udc)
+{
+	u32 temp;
+	unsigned long timeout;
+
+	/* Clear the device address */
+	temp = fsl_readl(&dr_regs->deviceaddr);
+	fsl_writel(temp & ~USB_DEVICE_ADDRESS_MASK, &dr_regs->deviceaddr);
+
+	udc->device_address = 0;
+
+	/* Clear usb state */
+	udc->resume_state = 0;
+	udc->ep0_dir = 0;
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->remote_wakeup = 0;	/* default to 0 on reset */
+	udc->gadget.b_hnp_enable = 0;
+	udc->gadget.a_hnp_support = 0;
+	udc->gadget.a_alt_hnp_support = 0;
+
+	/* Clear all the setup token semaphores */
+	temp = fsl_readl(&dr_regs->endptsetupstat);
+	fsl_writel(temp, &dr_regs->endptsetupstat);
+
+	/* Clear all the endpoint complete status bits */
+	temp = fsl_readl(&dr_regs->endptcomplete);
+	fsl_writel(temp, &dr_regs->endptcomplete);
+
+	timeout = jiffies + 100;
+	while (fsl_readl(&dr_regs->endpointprime)) {
+		/* Wait until all endptprime bits cleared */
+		if (time_after(jiffies, timeout)) {
+			ERR("Timeout for reset\n");
+			break;
+		}
+		cpu_relax();
+	}
+
+	/* Write 1s to the flush register */
+	fsl_writel(0xffffffff, &dr_regs->endptflush);
+
+	if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) {
+		VDBG("Bus reset");
+		/* Bus is reseting */
+		udc->bus_reset = 1;
+		/* Reset all the queues, include XD, dTD, EP queue
+		 * head and TR Queue */
+		reset_queues(udc, true);
+		udc->usb_state = USB_STATE_DEFAULT;
+	} else {
+		VDBG("Controller reset");
+		/* initialize usb hw reg except for regs for EP, not
+		 * touch usbintr reg */
+		dr_controller_setup(udc);
+
+		/* Reset all internal used Queues */
+		reset_queues(udc, false);
+
+		ep0_setup(udc);
+
+		/* Enable DR IRQ reg, Set Run bit, change udc state */
+		dr_controller_run(udc);
+		udc->usb_state = USB_STATE_ATTACHED;
+	}
+}
+
+/*
+ * USB device controller interrupt handler
+ */
+static irqreturn_t fsl_udc_irq(int irq, void *_udc)
+{
+	struct fsl_udc *udc = _udc;
+	u32 irq_src;
+	irqreturn_t status = IRQ_NONE;
+	unsigned long flags;
+
+	/* Disable ISR for OTG host mode */
+	if (udc->stopped)
+		return IRQ_NONE;
+	spin_lock_irqsave(&udc->lock, flags);
+	irq_src = fsl_readl(&dr_regs->usbsts) & fsl_readl(&dr_regs->usbintr);
+	/* Clear notification bits */
+	fsl_writel(irq_src, &dr_regs->usbsts);
+
+	/* VDBG("irq_src [0x%8x]", irq_src); */
+
+	/* Need to resume? */
+	if (udc->usb_state == USB_STATE_SUSPENDED)
+		if ((fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_SUSPEND) == 0)
+			bus_resume(udc);
+
+	/* USB Interrupt */
+	if (irq_src & USB_STS_INT) {
+		VDBG("Packet int");
+		/* Setup package, we only support ep0 as control ep */
+		if (fsl_readl(&dr_regs->endptsetupstat) & EP_SETUP_STATUS_EP0) {
+			tripwire_handler(udc, 0,
+					(u8 *) (&udc->local_setup_buff));
+			setup_received_irq(udc, &udc->local_setup_buff);
+			status = IRQ_HANDLED;
+		}
+
+		/* completion of dtd */
+		if (fsl_readl(&dr_regs->endptcomplete)) {
+			dtd_complete_irq(udc);
+			status = IRQ_HANDLED;
+		}
+	}
+
+	/* SOF (for ISO transfer) */
+	if (irq_src & USB_STS_SOF) {
+		status = IRQ_HANDLED;
+	}
+
+	/* Port Change */
+	if (irq_src & USB_STS_PORT_CHANGE) {
+		port_change_irq(udc);
+		status = IRQ_HANDLED;
+	}
+
+	/* Reset Received */
+	if (irq_src & USB_STS_RESET) {
+		VDBG("reset int");
+		reset_irq(udc);
+		status = IRQ_HANDLED;
+	}
+
+	/* Sleep Enable (Suspend) */
+	if (irq_src & USB_STS_SUSPEND) {
+		suspend_irq(udc);
+		status = IRQ_HANDLED;
+	}
+
+	if (irq_src & (USB_STS_ERR | USB_STS_SYS_ERR)) {
+		VDBG("Error IRQ %x", irq_src);
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return status;
+}
+
+/*----------------------------------------------------------------*
+ * Hook to gadget drivers
+ * Called by initialization code of gadget drivers
+*----------------------------------------------------------------*/
+static int fsl_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	int retval = 0;
+	unsigned long flags;
+
+	/* lock is needed but whether should use this lock or another */
+	spin_lock_irqsave(&udc_controller->lock, flags);
+
+	/* hook up the driver */
+	udc_controller->driver = driver;
+	spin_unlock_irqrestore(&udc_controller->lock, flags);
+	g->is_selfpowered = 1;
+
+	if (!IS_ERR_OR_NULL(udc_controller->transceiver)) {
+		/* Suspend the controller until OTG enable it */
+		udc_controller->stopped = 1;
+		printk(KERN_INFO "Suspend udc for OTG auto detect\n");
+
+		/* connect to bus through transceiver */
+		if (!IS_ERR_OR_NULL(udc_controller->transceiver)) {
+			retval = otg_set_peripheral(
+					udc_controller->transceiver->otg,
+						    &udc_controller->gadget);
+			if (retval < 0) {
+				ERR("can't bind to transceiver\n");
+				udc_controller->driver = NULL;
+				return retval;
+			}
+		}
+	} else {
+		/* Enable DR IRQ reg and set USBCMD reg Run bit */
+		dr_controller_run(udc_controller);
+		udc_controller->usb_state = USB_STATE_ATTACHED;
+		udc_controller->ep0_state = WAIT_FOR_SETUP;
+		udc_controller->ep0_dir = 0;
+	}
+
+	return retval;
+}
+
+/* Disconnect from gadget driver */
+static int fsl_udc_stop(struct usb_gadget *g)
+{
+	struct fsl_ep *loop_ep;
+	unsigned long flags;
+
+	if (!IS_ERR_OR_NULL(udc_controller->transceiver))
+		otg_set_peripheral(udc_controller->transceiver->otg, NULL);
+
+	/* stop DR, disable intr */
+	dr_controller_stop(udc_controller);
+
+	/* in fact, no needed */
+	udc_controller->usb_state = USB_STATE_ATTACHED;
+	udc_controller->ep0_state = WAIT_FOR_SETUP;
+	udc_controller->ep0_dir = 0;
+
+	/* stand operation */
+	spin_lock_irqsave(&udc_controller->lock, flags);
+	udc_controller->gadget.speed = USB_SPEED_UNKNOWN;
+	nuke(&udc_controller->eps[0], -ESHUTDOWN);
+	list_for_each_entry(loop_ep, &udc_controller->gadget.ep_list,
+			ep.ep_list)
+		nuke(loop_ep, -ESHUTDOWN);
+	spin_unlock_irqrestore(&udc_controller->lock, flags);
+
+	udc_controller->driver = NULL;
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------
+		PROC File System Support
+-------------------------------------------------------------------------*/
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+#include <linux/seq_file.h>
+
+static const char proc_filename[] = "driver/fsl_usb2_udc";
+
+static int fsl_proc_read(struct seq_file *m, void *v)
+{
+	unsigned long flags;
+	int i;
+	u32 tmp_reg;
+	struct fsl_ep *ep = NULL;
+	struct fsl_req *req;
+
+	struct fsl_udc *udc = udc_controller;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* ------basic driver information ---- */
+	seq_printf(m,
+			DRIVER_DESC "\n"
+			"%s version: %s\n"
+			"Gadget driver: %s\n\n",
+			driver_name, DRIVER_VERSION,
+			udc->driver ? udc->driver->driver.name : "(none)");
+
+	/* ------ DR Registers ----- */
+	tmp_reg = fsl_readl(&dr_regs->usbcmd);
+	seq_printf(m,
+			"USBCMD reg:\n"
+			"SetupTW: %d\n"
+			"Run/Stop: %s\n\n",
+			(tmp_reg & USB_CMD_SUTW) ? 1 : 0,
+			(tmp_reg & USB_CMD_RUN_STOP) ? "Run" : "Stop");
+
+	tmp_reg = fsl_readl(&dr_regs->usbsts);
+	seq_printf(m,
+			"USB Status Reg:\n"
+			"Dr Suspend: %d Reset Received: %d System Error: %s "
+			"USB Error Interrupt: %s\n\n",
+			(tmp_reg & USB_STS_SUSPEND) ? 1 : 0,
+			(tmp_reg & USB_STS_RESET) ? 1 : 0,
+			(tmp_reg & USB_STS_SYS_ERR) ? "Err" : "Normal",
+			(tmp_reg & USB_STS_ERR) ? "Err detected" : "No err");
+
+	tmp_reg = fsl_readl(&dr_regs->usbintr);
+	seq_printf(m,
+			"USB Interrupt Enable Reg:\n"
+			"Sleep Enable: %d SOF Received Enable: %d "
+			"Reset Enable: %d\n"
+			"System Error Enable: %d "
+			"Port Change Detected Enable: %d\n"
+			"USB Error Intr Enable: %d USB Intr Enable: %d\n\n",
+			(tmp_reg & USB_INTR_DEVICE_SUSPEND) ? 1 : 0,
+			(tmp_reg & USB_INTR_SOF_EN) ? 1 : 0,
+			(tmp_reg & USB_INTR_RESET_EN) ? 1 : 0,
+			(tmp_reg & USB_INTR_SYS_ERR_EN) ? 1 : 0,
+			(tmp_reg & USB_INTR_PTC_DETECT_EN) ? 1 : 0,
+			(tmp_reg & USB_INTR_ERR_INT_EN) ? 1 : 0,
+			(tmp_reg & USB_INTR_INT_EN) ? 1 : 0);
+
+	tmp_reg = fsl_readl(&dr_regs->frindex);
+	seq_printf(m,
+			"USB Frame Index Reg: Frame Number is 0x%x\n\n",
+			(tmp_reg & USB_FRINDEX_MASKS));
+
+	tmp_reg = fsl_readl(&dr_regs->deviceaddr);
+	seq_printf(m,
+			"USB Device Address Reg: Device Addr is 0x%x\n\n",
+			(tmp_reg & USB_DEVICE_ADDRESS_MASK));
+
+	tmp_reg = fsl_readl(&dr_regs->endpointlistaddr);
+	seq_printf(m,
+			"USB Endpoint List Address Reg: "
+			"Device Addr is 0x%x\n\n",
+			(tmp_reg & USB_EP_LIST_ADDRESS_MASK));
+
+	tmp_reg = fsl_readl(&dr_regs->portsc1);
+	seq_printf(m,
+		"USB Port Status&Control Reg:\n"
+		"Port Transceiver Type : %s Port Speed: %s\n"
+		"PHY Low Power Suspend: %s Port Reset: %s "
+		"Port Suspend Mode: %s\n"
+		"Over-current Change: %s "
+		"Port Enable/Disable Change: %s\n"
+		"Port Enabled/Disabled: %s "
+		"Current Connect Status: %s\n\n", ( {
+			const char *s;
+			switch (tmp_reg & PORTSCX_PTS_FSLS) {
+			case PORTSCX_PTS_UTMI:
+				s = "UTMI"; break;
+			case PORTSCX_PTS_ULPI:
+				s = "ULPI "; break;
+			case PORTSCX_PTS_FSLS:
+				s = "FS/LS Serial"; break;
+			default:
+				s = "None"; break;
+			}
+			s;} ),
+		usb_speed_string(portscx_device_speed(tmp_reg)),
+		(tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ?
+		"Normal PHY mode" : "Low power mode",
+		(tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" :
+		"Not in Reset",
+		(tmp_reg & PORTSCX_PORT_SUSPEND) ? "In " : "Not in",
+		(tmp_reg & PORTSCX_OVER_CURRENT_CHG) ? "Dected" :
+		"No",
+		(tmp_reg & PORTSCX_PORT_EN_DIS_CHANGE) ? "Disable" :
+		"Not change",
+		(tmp_reg & PORTSCX_PORT_ENABLE) ? "Enable" :
+		"Not correct",
+		(tmp_reg & PORTSCX_CURRENT_CONNECT_STATUS) ?
+		"Attached" : "Not-Att");
+
+	tmp_reg = fsl_readl(&dr_regs->usbmode);
+	seq_printf(m,
+			"USB Mode Reg: Controller Mode is: %s\n\n", ( {
+				const char *s;
+				switch (tmp_reg & USB_MODE_CTRL_MODE_HOST) {
+				case USB_MODE_CTRL_MODE_IDLE:
+					s = "Idle"; break;
+				case USB_MODE_CTRL_MODE_DEVICE:
+					s = "Device Controller"; break;
+				case USB_MODE_CTRL_MODE_HOST:
+					s = "Host Controller"; break;
+				default:
+					s = "None"; break;
+				}
+				s;
+			} ));
+
+	tmp_reg = fsl_readl(&dr_regs->endptsetupstat);
+	seq_printf(m,
+			"Endpoint Setup Status Reg: SETUP on ep 0x%x\n\n",
+			(tmp_reg & EP_SETUP_STATUS_MASK));
+
+	for (i = 0; i < udc->max_ep / 2; i++) {
+		tmp_reg = fsl_readl(&dr_regs->endptctrl[i]);
+		seq_printf(m, "EP Ctrl Reg [0x%x]: = [0x%x]\n", i, tmp_reg);
+	}
+	tmp_reg = fsl_readl(&dr_regs->endpointprime);
+	seq_printf(m, "EP Prime Reg = [0x%x]\n\n", tmp_reg);
+
+	if (udc->pdata->have_sysif_regs) {
+		tmp_reg = usb_sys_regs->snoop1;
+		seq_printf(m, "Snoop1 Reg : = [0x%x]\n\n", tmp_reg);
+
+		tmp_reg = usb_sys_regs->control;
+		seq_printf(m, "General Control Reg : = [0x%x]\n\n", tmp_reg);
+	}
+
+	/* ------fsl_udc, fsl_ep, fsl_request structure information ----- */
+	ep = &udc->eps[0];
+	seq_printf(m, "For %s Maxpkt is 0x%x index is 0x%x\n",
+			ep->ep.name, ep_maxpacket(ep), ep_index(ep));
+
+	if (list_empty(&ep->queue)) {
+		seq_puts(m, "its req queue is empty\n\n");
+	} else {
+		list_for_each_entry(req, &ep->queue, queue) {
+			seq_printf(m,
+				"req %p actual 0x%x length 0x%x buf %p\n",
+				&req->req, req->req.actual,
+				req->req.length, req->req.buf);
+		}
+	}
+	/* other gadget->eplist ep */
+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
+		if (ep->ep.desc) {
+			seq_printf(m,
+					"\nFor %s Maxpkt is 0x%x "
+					"index is 0x%x\n",
+					ep->ep.name, ep_maxpacket(ep),
+					ep_index(ep));
+
+			if (list_empty(&ep->queue)) {
+				seq_puts(m, "its req queue is empty\n\n");
+			} else {
+				list_for_each_entry(req, &ep->queue, queue) {
+					seq_printf(m,
+						"req %p actual 0x%x length "
+						"0x%x  buf %p\n",
+						&req->req, req->req.actual,
+						req->req.length, req->req.buf);
+				}	/* end for each_entry of ep req */
+			}	/* end for else */
+		}	/* end for if(ep->queue) */
+	}	/* end (ep->desc) */
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+#define create_proc_file() \
+	proc_create_single(proc_filename, 0, NULL, fsl_proc_read)
+#define remove_proc_file()	remove_proc_entry(proc_filename, NULL)
+
+#else				/* !CONFIG_USB_GADGET_DEBUG_FILES */
+
+#define create_proc_file()	do {} while (0)
+#define remove_proc_file()	do {} while (0)
+
+#endif				/* CONFIG_USB_GADGET_DEBUG_FILES */
+
+/*-------------------------------------------------------------------------*/
+
+/* Release udc structures */
+static void fsl_udc_release(struct device *dev)
+{
+	complete(udc_controller->done);
+	dma_free_coherent(dev->parent, udc_controller->ep_qh_size,
+			udc_controller->ep_qh, udc_controller->ep_qh_dma);
+	kfree(udc_controller);
+}
+
+/******************************************************************
+	Internal structure setup functions
+*******************************************************************/
+/*------------------------------------------------------------------
+ * init resource for global controller called by fsl_udc_probe()
+ * On success the udc handle is initialized, on failure it is
+ * unchanged (reset).
+ * Return 0 on success and -1 on allocation failure
+ ------------------------------------------------------------------*/
+static int struct_udc_setup(struct fsl_udc *udc,
+		struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata;
+	size_t size;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	udc->phy_mode = pdata->phy_mode;
+
+	udc->eps = kcalloc(udc->max_ep, sizeof(struct fsl_ep), GFP_KERNEL);
+	if (!udc->eps) {
+		ERR("kmalloc udc endpoint status failed\n");
+		goto eps_alloc_failed;
+	}
+
+	/* initialized QHs, take care of alignment */
+	size = udc->max_ep * sizeof(struct ep_queue_head);
+	if (size < QH_ALIGNMENT)
+		size = QH_ALIGNMENT;
+	else if ((size % QH_ALIGNMENT) != 0) {
+		size += QH_ALIGNMENT + 1;
+		size &= ~(QH_ALIGNMENT - 1);
+	}
+	udc->ep_qh = dma_alloc_coherent(&pdev->dev, size,
+					&udc->ep_qh_dma, GFP_KERNEL);
+	if (!udc->ep_qh) {
+		ERR("malloc QHs for udc failed\n");
+		goto ep_queue_alloc_failed;
+	}
+
+	udc->ep_qh_size = size;
+
+	/* Initialize ep0 status request structure */
+	/* FIXME: fsl_alloc_request() ignores ep argument */
+	udc->status_req = container_of(fsl_alloc_request(NULL, GFP_KERNEL),
+			struct fsl_req, req);
+	if (!udc->status_req) {
+		ERR("kzalloc for udc status request failed\n");
+		goto udc_status_alloc_failed;
+	}
+
+	/* allocate a small amount of memory to get valid address */
+	udc->status_req->req.buf = kmalloc(8, GFP_KERNEL);
+	if (!udc->status_req->req.buf) {
+		ERR("kzalloc for udc request buffer failed\n");
+		goto udc_req_buf_alloc_failed;
+	}
+
+	udc->resume_state = USB_STATE_NOTATTACHED;
+	udc->usb_state = USB_STATE_POWERED;
+	udc->ep0_dir = 0;
+	udc->remote_wakeup = 0;	/* default to 0 on reset */
+
+	return 0;
+
+udc_req_buf_alloc_failed:
+	kfree(udc->status_req);
+udc_status_alloc_failed:
+	kfree(udc->ep_qh);
+	udc->ep_qh_size = 0;
+ep_queue_alloc_failed:
+	kfree(udc->eps);
+eps_alloc_failed:
+	udc->phy_mode = 0;
+	return -1;
+
+}
+
+/*----------------------------------------------------------------
+ * Setup the fsl_ep struct for eps
+ * Link fsl_ep->ep to gadget->ep_list
+ * ep0out is not used so do nothing here
+ * ep0in should be taken care
+ *--------------------------------------------------------------*/
+static int struct_ep_setup(struct fsl_udc *udc, unsigned char index,
+		char *name, int link)
+{
+	struct fsl_ep *ep = &udc->eps[index];
+
+	ep->udc = udc;
+	strcpy(ep->name, name);
+	ep->ep.name = ep->name;
+
+	ep->ep.ops = &fsl_ep_ops;
+	ep->stopped = 0;
+
+	if (index == 0) {
+		ep->ep.caps.type_control = true;
+	} else {
+		ep->ep.caps.type_iso = true;
+		ep->ep.caps.type_bulk = true;
+		ep->ep.caps.type_int = true;
+	}
+
+	if (index & 1)
+		ep->ep.caps.dir_in = true;
+	else
+		ep->ep.caps.dir_out = true;
+
+	/* for ep0: maxP defined in desc
+	 * for other eps, maxP is set by epautoconfig() called by gadget layer
+	 */
+	usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
+
+	/* the queue lists any req for this ep */
+	INIT_LIST_HEAD(&ep->queue);
+
+	/* gagdet.ep_list used for ep_autoconfig so no ep0 */
+	if (link)
+		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+	ep->gadget = &udc->gadget;
+	ep->qh = &udc->ep_qh[index];
+
+	return 0;
+}
+
+/* Driver probe function
+ * all initialization operations implemented here except enabling usb_intr reg
+ * board setup should have been done in the platform code
+ */
+static int fsl_udc_probe(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata;
+	struct resource *res;
+	int ret = -ENODEV;
+	unsigned int i;
+	u32 dccparams;
+
+	udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL);
+	if (udc_controller == NULL)
+		return -ENOMEM;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	udc_controller->pdata = pdata;
+	spin_lock_init(&udc_controller->lock);
+	udc_controller->stopped = 1;
+
+#ifdef CONFIG_USB_OTG
+	if (pdata->operating_mode == FSL_USB2_DR_OTG) {
+		udc_controller->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+		if (IS_ERR_OR_NULL(udc_controller->transceiver)) {
+			ERR("Can't find OTG driver!\n");
+			ret = -ENODEV;
+			goto err_kfree;
+		}
+	}
+#endif
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENXIO;
+		goto err_kfree;
+	}
+
+	if (pdata->operating_mode == FSL_USB2_DR_DEVICE) {
+		if (!request_mem_region(res->start, resource_size(res),
+					driver_name)) {
+			ERR("request mem region for %s failed\n", pdev->name);
+			ret = -EBUSY;
+			goto err_kfree;
+		}
+	}
+
+	dr_regs = ioremap(res->start, resource_size(res));
+	if (!dr_regs) {
+		ret = -ENOMEM;
+		goto err_release_mem_region;
+	}
+
+	pdata->regs = (void __iomem *)dr_regs;
+
+	/*
+	 * do platform specific init: check the clock, grab/config pins, etc.
+	 */
+	if (pdata->init && pdata->init(pdev)) {
+		ret = -ENODEV;
+		goto err_iounmap;
+	}
+
+	/* Set accessors only after pdata->init() ! */
+	fsl_set_accessors(pdata);
+
+	if (pdata->have_sysif_regs)
+		usb_sys_regs = (void *)dr_regs + USB_DR_SYS_OFFSET;
+
+	/* Read Device Controller Capability Parameters register */
+	dccparams = fsl_readl(&dr_regs->dccparams);
+	if (!(dccparams & DCCPARAMS_DC)) {
+		ERR("This SOC doesn't support device role\n");
+		ret = -ENODEV;
+		goto err_exit;
+	}
+	/* Get max device endpoints */
+	/* DEN is bidirectional ep number, max_ep doubles the number */
+	udc_controller->max_ep = (dccparams & DCCPARAMS_DEN_MASK) * 2;
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret <= 0) {
+		ret = ret ? : -ENODEV;
+		goto err_exit;
+	}
+	udc_controller->irq = ret;
+
+	ret = request_irq(udc_controller->irq, fsl_udc_irq, IRQF_SHARED,
+			driver_name, udc_controller);
+	if (ret != 0) {
+		ERR("cannot request irq %d err %d\n",
+				udc_controller->irq, ret);
+		goto err_exit;
+	}
+
+	/* Initialize the udc structure including QH member and other member */
+	if (struct_udc_setup(udc_controller, pdev)) {
+		ERR("Can't initialize udc data structure\n");
+		ret = -ENOMEM;
+		goto err_free_irq;
+	}
+
+	if (IS_ERR_OR_NULL(udc_controller->transceiver)) {
+		/* initialize usb hw reg except for regs for EP,
+		 * leave usbintr reg untouched */
+		dr_controller_setup(udc_controller);
+	}
+
+	/* Setup gadget structure */
+	udc_controller->gadget.ops = &fsl_gadget_ops;
+	udc_controller->gadget.max_speed = USB_SPEED_HIGH;
+	udc_controller->gadget.ep0 = &udc_controller->eps[0].ep;
+	INIT_LIST_HEAD(&udc_controller->gadget.ep_list);
+	udc_controller->gadget.speed = USB_SPEED_UNKNOWN;
+	udc_controller->gadget.name = driver_name;
+
+	/* Setup gadget.dev and register with kernel */
+	dev_set_name(&udc_controller->gadget.dev, "gadget");
+	udc_controller->gadget.dev.of_node = pdev->dev.of_node;
+
+	if (!IS_ERR_OR_NULL(udc_controller->transceiver))
+		udc_controller->gadget.is_otg = 1;
+
+	/* setup QH and epctrl for ep0 */
+	ep0_setup(udc_controller);
+
+	/* setup udc->eps[] for ep0 */
+	struct_ep_setup(udc_controller, 0, "ep0", 0);
+	/* for ep0: the desc defined here;
+	 * for other eps, gadget layer called ep_enable with defined desc
+	 */
+	udc_controller->eps[0].ep.desc = &fsl_ep0_desc;
+	usb_ep_set_maxpacket_limit(&udc_controller->eps[0].ep,
+				   USB_MAX_CTRL_PAYLOAD);
+
+	/* setup the udc->eps[] for non-control endpoints and link
+	 * to gadget.ep_list */
+	for (i = 1; i < (int)(udc_controller->max_ep / 2); i++) {
+		char name[14];
+
+		sprintf(name, "ep%dout", i);
+		struct_ep_setup(udc_controller, i * 2, name, 1);
+		sprintf(name, "ep%din", i);
+		struct_ep_setup(udc_controller, i * 2 + 1, name, 1);
+	}
+
+	/* use dma_pool for TD management */
+	udc_controller->td_pool = dma_pool_create("udc_td", &pdev->dev,
+			sizeof(struct ep_td_struct),
+			DTD_ALIGNMENT, UDC_DMA_BOUNDARY);
+	if (udc_controller->td_pool == NULL) {
+		ret = -ENOMEM;
+		goto err_free_irq;
+	}
+
+	ret = usb_add_gadget_udc_release(&pdev->dev, &udc_controller->gadget,
+			fsl_udc_release);
+	if (ret)
+		goto err_del_udc;
+
+	create_proc_file();
+	return 0;
+
+err_del_udc:
+	dma_pool_destroy(udc_controller->td_pool);
+err_free_irq:
+	free_irq(udc_controller->irq, udc_controller);
+err_exit:
+	if (pdata->exit)
+		pdata->exit(pdev);
+err_iounmap:
+	iounmap(dr_regs);
+err_release_mem_region:
+	if (pdata->operating_mode == FSL_USB2_DR_DEVICE)
+		release_mem_region(res->start, resource_size(res));
+err_kfree:
+	kfree(udc_controller);
+	udc_controller = NULL;
+	return ret;
+}
+
+/* Driver removal function
+ * Free resources and finish pending transactions
+ */
+static int fsl_udc_remove(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+	DECLARE_COMPLETION_ONSTACK(done);
+
+	if (!udc_controller)
+		return -ENODEV;
+
+	udc_controller->done = &done;
+	usb_del_gadget_udc(&udc_controller->gadget);
+
+	/* DR has been stopped in usb_gadget_unregister_driver() */
+	remove_proc_file();
+
+	/* Free allocated memory */
+	kfree(udc_controller->status_req->req.buf);
+	kfree(udc_controller->status_req);
+	kfree(udc_controller->eps);
+
+	dma_pool_destroy(udc_controller->td_pool);
+	free_irq(udc_controller->irq, udc_controller);
+	iounmap(dr_regs);
+	if (res && (pdata->operating_mode == FSL_USB2_DR_DEVICE))
+		release_mem_region(res->start, resource_size(res));
+
+	/* free udc --wait for the release() finished */
+	wait_for_completion(&done);
+
+	/*
+	 * do platform specific un-initialization:
+	 * release iomux pins, etc.
+	 */
+	if (pdata->exit)
+		pdata->exit(pdev);
+
+	return 0;
+}
+
+/*-----------------------------------------------------------------
+ * Modify Power management attributes
+ * Used by OTG statemachine to disable gadget temporarily
+ -----------------------------------------------------------------*/
+static int fsl_udc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	dr_controller_stop(udc_controller);
+	return 0;
+}
+
+/*-----------------------------------------------------------------
+ * Invoked on USB resume. May be called in_interrupt.
+ * Here we start the DR controller and enable the irq
+ *-----------------------------------------------------------------*/
+static int fsl_udc_resume(struct platform_device *pdev)
+{
+	/* Enable DR irq reg and set controller Run */
+	if (udc_controller->stopped) {
+		dr_controller_setup(udc_controller);
+		dr_controller_run(udc_controller);
+	}
+	udc_controller->usb_state = USB_STATE_ATTACHED;
+	udc_controller->ep0_state = WAIT_FOR_SETUP;
+	udc_controller->ep0_dir = 0;
+	return 0;
+}
+
+static int fsl_udc_otg_suspend(struct device *dev, pm_message_t state)
+{
+	struct fsl_udc *udc = udc_controller;
+	u32 mode, usbcmd;
+
+	mode = fsl_readl(&dr_regs->usbmode) & USB_MODE_CTRL_MODE_MASK;
+
+	pr_debug("%s(): mode 0x%x stopped %d\n", __func__, mode, udc->stopped);
+
+	/*
+	 * If the controller is already stopped, then this must be a
+	 * PM suspend.  Remember this fact, so that we will leave the
+	 * controller stopped at PM resume time.
+	 */
+	if (udc->stopped) {
+		pr_debug("gadget already stopped, leaving early\n");
+		udc->already_stopped = 1;
+		return 0;
+	}
+
+	if (mode != USB_MODE_CTRL_MODE_DEVICE) {
+		pr_debug("gadget not in device mode, leaving early\n");
+		return 0;
+	}
+
+	/* stop the controller */
+	usbcmd = fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP;
+	fsl_writel(usbcmd, &dr_regs->usbcmd);
+
+	udc->stopped = 1;
+
+	pr_info("USB Gadget suspended\n");
+
+	return 0;
+}
+
+static int fsl_udc_otg_resume(struct device *dev)
+{
+	pr_debug("%s(): stopped %d  already_stopped %d\n", __func__,
+		 udc_controller->stopped, udc_controller->already_stopped);
+
+	/*
+	 * If the controller was stopped at suspend time, then
+	 * don't resume it now.
+	 */
+	if (udc_controller->already_stopped) {
+		udc_controller->already_stopped = 0;
+		pr_debug("gadget was already stopped, leaving early\n");
+		return 0;
+	}
+
+	pr_info("USB Gadget resume\n");
+
+	return fsl_udc_resume(NULL);
+}
+/*-------------------------------------------------------------------------
+	Register entry point for the peripheral controller driver
+--------------------------------------------------------------------------*/
+static const struct platform_device_id fsl_udc_devtype[] = {
+	{
+		.name = "fsl-usb2-udc",
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, fsl_udc_devtype);
+static struct platform_driver udc_driver = {
+	.remove		= fsl_udc_remove,
+	.id_table	= fsl_udc_devtype,
+	/* these suspend and resume are not usb suspend and resume */
+	.suspend	= fsl_udc_suspend,
+	.resume		= fsl_udc_resume,
+	.driver		= {
+			.name = driver_name,
+			/* udc suspend/resume called from OTG driver */
+			.suspend = fsl_udc_otg_suspend,
+			.resume  = fsl_udc_otg_resume,
+	},
+};
+
+module_platform_driver_probe(udc_driver, fsl_udc_probe);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:fsl-usb2-udc");
diff --git a/drivers/usb/gadget/udc/fsl_usb2_udc.h b/drivers/usb/gadget/udc/fsl_usb2_udc.h
new file mode 100644
index 000000000..2efc5a930
--- /dev/null
+++ b/drivers/usb/gadget/udc/fsl_usb2_udc.h
@@ -0,0 +1,591 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2004,2012 Freescale Semiconductor, Inc
+ * All rights reserved.
+ *
+ * Freescale USB device/endpoint management registers
+ */
+#ifndef __FSL_USB2_UDC_H
+#define __FSL_USB2_UDC_H
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* ### define USB registers here
+ */
+#define USB_MAX_CTRL_PAYLOAD		64
+#define USB_DR_SYS_OFFSET		0x400
+
+ /* USB DR device mode registers (Little Endian) */
+struct usb_dr_device {
+	/* Capability register */
+	u8 res1[256];
+	u16 caplength;		/* Capability Register Length */
+	u16 hciversion;		/* Host Controller Interface Version */
+	u32 hcsparams;		/* Host Controller Structural Parameters */
+	u32 hccparams;		/* Host Controller Capability Parameters */
+	u8 res2[20];
+	u32 dciversion;		/* Device Controller Interface Version */
+	u32 dccparams;		/* Device Controller Capability Parameters */
+	u8 res3[24];
+	/* Operation register */
+	u32 usbcmd;		/* USB Command Register */
+	u32 usbsts;		/* USB Status Register */
+	u32 usbintr;		/* USB Interrupt Enable Register */
+	u32 frindex;		/* Frame Index Register */
+	u8 res4[4];
+	u32 deviceaddr;		/* Device Address */
+	u32 endpointlistaddr;	/* Endpoint List Address Register */
+	u8 res5[4];
+	u32 burstsize;		/* Master Interface Data Burst Size Register */
+	u32 txttfilltuning;	/* Transmit FIFO Tuning Controls Register */
+	u8 res6[24];
+	u32 configflag;		/* Configure Flag Register */
+	u32 portsc1;		/* Port 1 Status and Control Register */
+	u8 res7[28];
+	u32 otgsc;		/* On-The-Go Status and Control */
+	u32 usbmode;		/* USB Mode Register */
+	u32 endptsetupstat;	/* Endpoint Setup Status Register */
+	u32 endpointprime;	/* Endpoint Initialization Register */
+	u32 endptflush;		/* Endpoint Flush Register */
+	u32 endptstatus;	/* Endpoint Status Register */
+	u32 endptcomplete;	/* Endpoint Complete Register */
+	u32 endptctrl[6];	/* Endpoint Control Registers */
+};
+
+ /* USB DR host mode registers (Little Endian) */
+struct usb_dr_host {
+	/* Capability register */
+	u8 res1[256];
+	u16 caplength;		/* Capability Register Length */
+	u16 hciversion;		/* Host Controller Interface Version */
+	u32 hcsparams;		/* Host Controller Structural Parameters */
+	u32 hccparams;		/* Host Controller Capability Parameters */
+	u8 res2[20];
+	u32 dciversion;		/* Device Controller Interface Version */
+	u32 dccparams;		/* Device Controller Capability Parameters */
+	u8 res3[24];
+	/* Operation register */
+	u32 usbcmd;		/* USB Command Register */
+	u32 usbsts;		/* USB Status Register */
+	u32 usbintr;		/* USB Interrupt Enable Register */
+	u32 frindex;		/* Frame Index Register */
+	u8 res4[4];
+	u32 periodiclistbase;	/* Periodic Frame List Base Address Register */
+	u32 asynclistaddr;	/* Current Asynchronous List Address Register */
+	u8 res5[4];
+	u32 burstsize;		/* Master Interface Data Burst Size Register */
+	u32 txttfilltuning;	/* Transmit FIFO Tuning Controls Register */
+	u8 res6[24];
+	u32 configflag;		/* Configure Flag Register */
+	u32 portsc1;		/* Port 1 Status and Control Register */
+	u8 res7[28];
+	u32 otgsc;		/* On-The-Go Status and Control */
+	u32 usbmode;		/* USB Mode Register */
+	u32 endptsetupstat;	/* Endpoint Setup Status Register */
+	u32 endpointprime;	/* Endpoint Initialization Register */
+	u32 endptflush;		/* Endpoint Flush Register */
+	u32 endptstatus;	/* Endpoint Status Register */
+	u32 endptcomplete;	/* Endpoint Complete Register */
+	u32 endptctrl[6];	/* Endpoint Control Registers */
+};
+
+ /* non-EHCI USB system interface registers (Big Endian) */
+struct usb_sys_interface {
+	u32 snoop1;
+	u32 snoop2;
+	u32 age_cnt_thresh;	/* Age Count Threshold Register */
+	u32 pri_ctrl;		/* Priority Control Register */
+	u32 si_ctrl;		/* System Interface Control Register */
+	u8 res[236];
+	u32 control;		/* General Purpose Control Register */
+};
+
+/* ep0 transfer state */
+#define WAIT_FOR_SETUP          0
+#define DATA_STATE_XMIT         1
+#define DATA_STATE_NEED_ZLP     2
+#define WAIT_FOR_OUT_STATUS     3
+#define DATA_STATE_RECV         4
+
+/* Device Controller Capability Parameter register */
+#define DCCPARAMS_DC				0x00000080
+#define DCCPARAMS_DEN_MASK			0x0000001f
+
+/* Frame Index Register Bit Masks */
+#define	USB_FRINDEX_MASKS			0x3fff
+/* USB CMD  Register Bit Masks */
+#define  USB_CMD_RUN_STOP                     0x00000001
+#define  USB_CMD_CTRL_RESET                   0x00000002
+#define  USB_CMD_PERIODIC_SCHEDULE_EN         0x00000010
+#define  USB_CMD_ASYNC_SCHEDULE_EN            0x00000020
+#define  USB_CMD_INT_AA_DOORBELL              0x00000040
+#define  USB_CMD_ASP                          0x00000300
+#define  USB_CMD_ASYNC_SCH_PARK_EN            0x00000800
+#define  USB_CMD_SUTW                         0x00002000
+#define  USB_CMD_ATDTW                        0x00004000
+#define  USB_CMD_ITC                          0x00FF0000
+
+/* bit 15,3,2 are frame list size */
+#define  USB_CMD_FRAME_SIZE_1024              0x00000000
+#define  USB_CMD_FRAME_SIZE_512               0x00000004
+#define  USB_CMD_FRAME_SIZE_256               0x00000008
+#define  USB_CMD_FRAME_SIZE_128               0x0000000C
+#define  USB_CMD_FRAME_SIZE_64                0x00008000
+#define  USB_CMD_FRAME_SIZE_32                0x00008004
+#define  USB_CMD_FRAME_SIZE_16                0x00008008
+#define  USB_CMD_FRAME_SIZE_8                 0x0000800C
+
+/* bit 9-8 are async schedule park mode count */
+#define  USB_CMD_ASP_00                       0x00000000
+#define  USB_CMD_ASP_01                       0x00000100
+#define  USB_CMD_ASP_10                       0x00000200
+#define  USB_CMD_ASP_11                       0x00000300
+#define  USB_CMD_ASP_BIT_POS                  8
+
+/* bit 23-16 are interrupt threshold control */
+#define  USB_CMD_ITC_NO_THRESHOLD             0x00000000
+#define  USB_CMD_ITC_1_MICRO_FRM              0x00010000
+#define  USB_CMD_ITC_2_MICRO_FRM              0x00020000
+#define  USB_CMD_ITC_4_MICRO_FRM              0x00040000
+#define  USB_CMD_ITC_8_MICRO_FRM              0x00080000
+#define  USB_CMD_ITC_16_MICRO_FRM             0x00100000
+#define  USB_CMD_ITC_32_MICRO_FRM             0x00200000
+#define  USB_CMD_ITC_64_MICRO_FRM             0x00400000
+#define  USB_CMD_ITC_BIT_POS                  16
+
+/* USB STS Register Bit Masks */
+#define  USB_STS_INT                          0x00000001
+#define  USB_STS_ERR                          0x00000002
+#define  USB_STS_PORT_CHANGE                  0x00000004
+#define  USB_STS_FRM_LST_ROLL                 0x00000008
+#define  USB_STS_SYS_ERR                      0x00000010
+#define  USB_STS_IAA                          0x00000020
+#define  USB_STS_RESET                        0x00000040
+#define  USB_STS_SOF                          0x00000080
+#define  USB_STS_SUSPEND                      0x00000100
+#define  USB_STS_HC_HALTED                    0x00001000
+#define  USB_STS_RCL                          0x00002000
+#define  USB_STS_PERIODIC_SCHEDULE            0x00004000
+#define  USB_STS_ASYNC_SCHEDULE               0x00008000
+
+/* USB INTR Register Bit Masks */
+#define  USB_INTR_INT_EN                      0x00000001
+#define  USB_INTR_ERR_INT_EN                  0x00000002
+#define  USB_INTR_PTC_DETECT_EN               0x00000004
+#define  USB_INTR_FRM_LST_ROLL_EN             0x00000008
+#define  USB_INTR_SYS_ERR_EN                  0x00000010
+#define  USB_INTR_ASYN_ADV_EN                 0x00000020
+#define  USB_INTR_RESET_EN                    0x00000040
+#define  USB_INTR_SOF_EN                      0x00000080
+#define  USB_INTR_DEVICE_SUSPEND              0x00000100
+
+/* Device Address bit masks */
+#define  USB_DEVICE_ADDRESS_MASK              0xFE000000
+#define  USB_DEVICE_ADDRESS_BIT_POS           25
+
+/* endpoint list address bit masks */
+#define USB_EP_LIST_ADDRESS_MASK              0xfffff800
+
+/* PORTSCX  Register Bit Masks */
+#define  PORTSCX_CURRENT_CONNECT_STATUS       0x00000001
+#define  PORTSCX_CONNECT_STATUS_CHANGE        0x00000002
+#define  PORTSCX_PORT_ENABLE                  0x00000004
+#define  PORTSCX_PORT_EN_DIS_CHANGE           0x00000008
+#define  PORTSCX_OVER_CURRENT_ACT             0x00000010
+#define  PORTSCX_OVER_CURRENT_CHG             0x00000020
+#define  PORTSCX_PORT_FORCE_RESUME            0x00000040
+#define  PORTSCX_PORT_SUSPEND                 0x00000080
+#define  PORTSCX_PORT_RESET                   0x00000100
+#define  PORTSCX_LINE_STATUS_BITS             0x00000C00
+#define  PORTSCX_PORT_POWER                   0x00001000
+#define  PORTSCX_PORT_INDICTOR_CTRL           0x0000C000
+#define  PORTSCX_PORT_TEST_CTRL               0x000F0000
+#define  PORTSCX_WAKE_ON_CONNECT_EN           0x00100000
+#define  PORTSCX_WAKE_ON_CONNECT_DIS          0x00200000
+#define  PORTSCX_WAKE_ON_OVER_CURRENT         0x00400000
+#define  PORTSCX_PHY_LOW_POWER_SPD            0x00800000
+#define  PORTSCX_PORT_FORCE_FULL_SPEED        0x01000000
+#define  PORTSCX_PORT_SPEED_MASK              0x0C000000
+#define  PORTSCX_PORT_WIDTH                   0x10000000
+#define  PORTSCX_PHY_TYPE_SEL                 0xC0000000
+
+/* bit 11-10 are line status */
+#define  PORTSCX_LINE_STATUS_SE0              0x00000000
+#define  PORTSCX_LINE_STATUS_JSTATE           0x00000400
+#define  PORTSCX_LINE_STATUS_KSTATE           0x00000800
+#define  PORTSCX_LINE_STATUS_UNDEF            0x00000C00
+#define  PORTSCX_LINE_STATUS_BIT_POS          10
+
+/* bit 15-14 are port indicator control */
+#define  PORTSCX_PIC_OFF                      0x00000000
+#define  PORTSCX_PIC_AMBER                    0x00004000
+#define  PORTSCX_PIC_GREEN                    0x00008000
+#define  PORTSCX_PIC_UNDEF                    0x0000C000
+#define  PORTSCX_PIC_BIT_POS                  14
+
+/* bit 19-16 are port test control */
+#define  PORTSCX_PTC_DISABLE                  0x00000000
+#define  PORTSCX_PTC_JSTATE                   0x00010000
+#define  PORTSCX_PTC_KSTATE                   0x00020000
+#define  PORTSCX_PTC_SEQNAK                   0x00030000
+#define  PORTSCX_PTC_PACKET                   0x00040000
+#define  PORTSCX_PTC_FORCE_EN                 0x00050000
+#define  PORTSCX_PTC_BIT_POS                  16
+
+/* bit 27-26 are port speed */
+#define  PORTSCX_PORT_SPEED_FULL              0x00000000
+#define  PORTSCX_PORT_SPEED_LOW               0x04000000
+#define  PORTSCX_PORT_SPEED_HIGH              0x08000000
+#define  PORTSCX_PORT_SPEED_UNDEF             0x0C000000
+#define  PORTSCX_SPEED_BIT_POS                26
+
+/* bit 28 is parallel transceiver width for UTMI interface */
+#define  PORTSCX_PTW                          0x10000000
+#define  PORTSCX_PTW_8BIT                     0x00000000
+#define  PORTSCX_PTW_16BIT                    0x10000000
+
+/* bit 31-30 are port transceiver select */
+#define  PORTSCX_PTS_UTMI                     0x00000000
+#define  PORTSCX_PTS_ULPI                     0x80000000
+#define  PORTSCX_PTS_FSLS                     0xC0000000
+#define  PORTSCX_PTS_BIT_POS                  30
+
+/* otgsc Register Bit Masks */
+#define  OTGSC_CTRL_VUSB_DISCHARGE            0x00000001
+#define  OTGSC_CTRL_VUSB_CHARGE               0x00000002
+#define  OTGSC_CTRL_OTG_TERM                  0x00000008
+#define  OTGSC_CTRL_DATA_PULSING              0x00000010
+#define  OTGSC_STS_USB_ID                     0x00000100
+#define  OTGSC_STS_A_VBUS_VALID               0x00000200
+#define  OTGSC_STS_A_SESSION_VALID            0x00000400
+#define  OTGSC_STS_B_SESSION_VALID            0x00000800
+#define  OTGSC_STS_B_SESSION_END              0x00001000
+#define  OTGSC_STS_1MS_TOGGLE                 0x00002000
+#define  OTGSC_STS_DATA_PULSING               0x00004000
+#define  OTGSC_INTSTS_USB_ID                  0x00010000
+#define  OTGSC_INTSTS_A_VBUS_VALID            0x00020000
+#define  OTGSC_INTSTS_A_SESSION_VALID         0x00040000
+#define  OTGSC_INTSTS_B_SESSION_VALID         0x00080000
+#define  OTGSC_INTSTS_B_SESSION_END           0x00100000
+#define  OTGSC_INTSTS_1MS                     0x00200000
+#define  OTGSC_INTSTS_DATA_PULSING            0x00400000
+#define  OTGSC_INTR_USB_ID                    0x01000000
+#define  OTGSC_INTR_A_VBUS_VALID              0x02000000
+#define  OTGSC_INTR_A_SESSION_VALID           0x04000000
+#define  OTGSC_INTR_B_SESSION_VALID           0x08000000
+#define  OTGSC_INTR_B_SESSION_END             0x10000000
+#define  OTGSC_INTR_1MS_TIMER                 0x20000000
+#define  OTGSC_INTR_DATA_PULSING              0x40000000
+
+/* USB MODE Register Bit Masks */
+#define  USB_MODE_CTRL_MODE_IDLE              0x00000000
+#define  USB_MODE_CTRL_MODE_DEVICE            0x00000002
+#define  USB_MODE_CTRL_MODE_HOST              0x00000003
+#define  USB_MODE_CTRL_MODE_MASK              0x00000003
+#define  USB_MODE_CTRL_MODE_RSV               0x00000001
+#define  USB_MODE_ES                          0x00000004 /* Endian Select */
+#define  USB_MODE_SETUP_LOCK_OFF              0x00000008
+#define  USB_MODE_STREAM_DISABLE              0x00000010
+/* Endpoint Flush Register */
+#define EPFLUSH_TX_OFFSET		      0x00010000
+#define EPFLUSH_RX_OFFSET		      0x00000000
+
+/* Endpoint Setup Status bit masks */
+#define  EP_SETUP_STATUS_MASK                 0x0000003F
+#define  EP_SETUP_STATUS_EP0		      0x00000001
+
+/* ENDPOINTCTRLx  Register Bit Masks */
+#define  EPCTRL_TX_ENABLE                     0x00800000
+#define  EPCTRL_TX_DATA_TOGGLE_RST            0x00400000	/* Not EP0 */
+#define  EPCTRL_TX_DATA_TOGGLE_INH            0x00200000	/* Not EP0 */
+#define  EPCTRL_TX_TYPE                       0x000C0000
+#define  EPCTRL_TX_DATA_SOURCE                0x00020000	/* Not EP0 */
+#define  EPCTRL_TX_EP_STALL                   0x00010000
+#define  EPCTRL_RX_ENABLE                     0x00000080
+#define  EPCTRL_RX_DATA_TOGGLE_RST            0x00000040	/* Not EP0 */
+#define  EPCTRL_RX_DATA_TOGGLE_INH            0x00000020	/* Not EP0 */
+#define  EPCTRL_RX_TYPE                       0x0000000C
+#define  EPCTRL_RX_DATA_SINK                  0x00000002	/* Not EP0 */
+#define  EPCTRL_RX_EP_STALL                   0x00000001
+
+/* bit 19-18 and 3-2 are endpoint type */
+#define  EPCTRL_EP_TYPE_CONTROL               0
+#define  EPCTRL_EP_TYPE_ISO                   1
+#define  EPCTRL_EP_TYPE_BULK                  2
+#define  EPCTRL_EP_TYPE_INTERRUPT             3
+#define  EPCTRL_TX_EP_TYPE_SHIFT              18
+#define  EPCTRL_RX_EP_TYPE_SHIFT              2
+
+/* SNOOPn Register Bit Masks */
+#define  SNOOP_ADDRESS_MASK                   0xFFFFF000
+#define  SNOOP_SIZE_ZERO                      0x00	/* snooping disable */
+#define  SNOOP_SIZE_4KB                       0x0B	/* 4KB snoop size */
+#define  SNOOP_SIZE_8KB                       0x0C
+#define  SNOOP_SIZE_16KB                      0x0D
+#define  SNOOP_SIZE_32KB                      0x0E
+#define  SNOOP_SIZE_64KB                      0x0F
+#define  SNOOP_SIZE_128KB                     0x10
+#define  SNOOP_SIZE_256KB                     0x11
+#define  SNOOP_SIZE_512KB                     0x12
+#define  SNOOP_SIZE_1MB                       0x13
+#define  SNOOP_SIZE_2MB                       0x14
+#define  SNOOP_SIZE_4MB                       0x15
+#define  SNOOP_SIZE_8MB                       0x16
+#define  SNOOP_SIZE_16MB                      0x17
+#define  SNOOP_SIZE_32MB                      0x18
+#define  SNOOP_SIZE_64MB                      0x19
+#define  SNOOP_SIZE_128MB                     0x1A
+#define  SNOOP_SIZE_256MB                     0x1B
+#define  SNOOP_SIZE_512MB                     0x1C
+#define  SNOOP_SIZE_1GB                       0x1D
+#define  SNOOP_SIZE_2GB                       0x1E	/* 2GB snoop size */
+
+/* pri_ctrl Register Bit Masks */
+#define  PRI_CTRL_PRI_LVL1                    0x0000000C
+#define  PRI_CTRL_PRI_LVL0                    0x00000003
+
+/* si_ctrl Register Bit Masks */
+#define  SI_CTRL_ERR_DISABLE                  0x00000010
+#define  SI_CTRL_IDRC_DISABLE                 0x00000008
+#define  SI_CTRL_RD_SAFE_EN                   0x00000004
+#define  SI_CTRL_RD_PREFETCH_DISABLE          0x00000002
+#define  SI_CTRL_RD_PREFEFETCH_VAL            0x00000001
+
+/* control Register Bit Masks */
+#define  USB_CTRL_IOENB                       0x00000004
+#define  USB_CTRL_ULPI_INT0EN                 0x00000001
+#define USB_CTRL_UTMI_PHY_EN		      0x00000200
+#define USB_CTRL_USB_EN			      0x00000004
+#define USB_CTRL_ULPI_PHY_CLK_SEL	      0x00000400
+
+/* Endpoint Queue Head data struct
+ * Rem: all the variables of qh are LittleEndian Mode
+ * and NEXT_POINTER_MASK should operate on a LittleEndian, Phy Addr
+ */
+struct ep_queue_head {
+	u32 max_pkt_length;	/* Mult(31-30) , Zlt(29) , Max Pkt len
+				   and IOS(15) */
+	u32 curr_dtd_ptr;	/* Current dTD Pointer(31-5) */
+	u32 next_dtd_ptr;	/* Next dTD Pointer(31-5), T(0) */
+	u32 size_ioc_int_sts;	/* Total bytes (30-16), IOC (15),
+				   MultO(11-10), STS (7-0)  */
+	u32 buff_ptr0;		/* Buffer pointer Page 0 (31-12) */
+	u32 buff_ptr1;		/* Buffer pointer Page 1 (31-12) */
+	u32 buff_ptr2;		/* Buffer pointer Page 2 (31-12) */
+	u32 buff_ptr3;		/* Buffer pointer Page 3 (31-12) */
+	u32 buff_ptr4;		/* Buffer pointer Page 4 (31-12) */
+	u32 res1;
+	u8 setup_buffer[8];	/* Setup data 8 bytes */
+	u32 res2[4];
+};
+
+/* Endpoint Queue Head Bit Masks */
+#define  EP_QUEUE_HEAD_MULT_POS               30
+#define  EP_QUEUE_HEAD_ZLT_SEL                0x20000000
+#define  EP_QUEUE_HEAD_MAX_PKT_LEN_POS        16
+#define  EP_QUEUE_HEAD_MAX_PKT_LEN(ep_info)   (((ep_info)>>16)&0x07ff)
+#define  EP_QUEUE_HEAD_IOS                    0x00008000
+#define  EP_QUEUE_HEAD_NEXT_TERMINATE         0x00000001
+#define  EP_QUEUE_HEAD_IOC                    0x00008000
+#define  EP_QUEUE_HEAD_MULTO                  0x00000C00
+#define  EP_QUEUE_HEAD_STATUS_HALT	      0x00000040
+#define  EP_QUEUE_HEAD_STATUS_ACTIVE          0x00000080
+#define  EP_QUEUE_CURRENT_OFFSET_MASK         0x00000FFF
+#define  EP_QUEUE_HEAD_NEXT_POINTER_MASK      0xFFFFFFE0
+#define  EP_QUEUE_FRINDEX_MASK                0x000007FF
+#define  EP_MAX_LENGTH_TRANSFER               0x4000
+
+/* Endpoint Transfer Descriptor data struct */
+/* Rem: all the variables of td are LittleEndian Mode */
+struct ep_td_struct {
+	u32 next_td_ptr;	/* Next TD pointer(31-5), T(0) set
+				   indicate invalid */
+	u32 size_ioc_sts;	/* Total bytes (30-16), IOC (15),
+				   MultO(11-10), STS (7-0)  */
+	u32 buff_ptr0;		/* Buffer pointer Page 0 */
+	u32 buff_ptr1;		/* Buffer pointer Page 1 */
+	u32 buff_ptr2;		/* Buffer pointer Page 2 */
+	u32 buff_ptr3;		/* Buffer pointer Page 3 */
+	u32 buff_ptr4;		/* Buffer pointer Page 4 */
+	u32 res;
+	/* 32 bytes */
+	dma_addr_t td_dma;	/* dma address for this td */
+	/* virtual address of next td specified in next_td_ptr */
+	struct ep_td_struct *next_td_virt;
+};
+
+/* Endpoint Transfer Descriptor bit Masks */
+#define  DTD_NEXT_TERMINATE                   0x00000001
+#define  DTD_IOC                              0x00008000
+#define  DTD_STATUS_ACTIVE                    0x00000080
+#define  DTD_STATUS_HALTED                    0x00000040
+#define  DTD_STATUS_DATA_BUFF_ERR             0x00000020
+#define  DTD_STATUS_TRANSACTION_ERR           0x00000008
+#define  DTD_RESERVED_FIELDS                  0x80007300
+#define  DTD_ADDR_MASK                        0xFFFFFFE0
+#define  DTD_PACKET_SIZE                      0x7FFF0000
+#define  DTD_LENGTH_BIT_POS                   16
+#define  DTD_ERROR_MASK                       (DTD_STATUS_HALTED | \
+                                               DTD_STATUS_DATA_BUFF_ERR | \
+                                               DTD_STATUS_TRANSACTION_ERR)
+/* Alignment requirements; must be a power of two */
+#define DTD_ALIGNMENT				0x20
+#define QH_ALIGNMENT				2048
+
+/* Controller dma boundary */
+#define UDC_DMA_BOUNDARY			0x1000
+
+/*-------------------------------------------------------------------------*/
+
+/* ### driver private data
+ */
+struct fsl_req {
+	struct usb_request req;
+	struct list_head queue;
+	/* ep_queue() func will add
+	   a request->queue into a udc_ep->queue 'd tail */
+	struct fsl_ep *ep;
+	unsigned mapped:1;
+
+	struct ep_td_struct *head, *tail;	/* For dTD List
+						   cpu endian Virtual addr */
+	unsigned int dtd_count;
+};
+
+#define REQ_UNCOMPLETE			1
+
+struct fsl_ep {
+	struct usb_ep ep;
+	struct list_head queue;
+	struct fsl_udc *udc;
+	struct ep_queue_head *qh;
+	struct usb_gadget *gadget;
+
+	char name[14];
+	unsigned stopped:1;
+};
+
+#define EP_DIR_IN	1
+#define EP_DIR_OUT	0
+
+struct fsl_udc {
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *driver;
+	struct fsl_usb2_platform_data *pdata;
+	struct completion *done;	/* to make sure release() is done */
+	struct fsl_ep *eps;
+	unsigned int max_ep;
+	unsigned int irq;
+
+	struct usb_ctrlrequest local_setup_buff;
+	spinlock_t lock;
+	struct usb_phy *transceiver;
+	unsigned softconnect:1;
+	unsigned vbus_active:1;
+	unsigned stopped:1;
+	unsigned remote_wakeup:1;
+	unsigned already_stopped:1;
+	unsigned big_endian_desc:1;
+
+	struct ep_queue_head *ep_qh;	/* Endpoints Queue-Head */
+	struct fsl_req *status_req;	/* ep0 status request */
+	struct dma_pool *td_pool;	/* dma pool for DTD */
+	enum fsl_usb2_phy_modes phy_mode;
+
+	size_t ep_qh_size;		/* size after alignment adjustment*/
+	dma_addr_t ep_qh_dma;		/* dma address of QH */
+
+	u32 max_pipes;          /* Device max pipes */
+	u32 bus_reset;		/* Device is bus resetting */
+	u32 resume_state;	/* USB state to resume */
+	u32 usb_state;		/* USB current state */
+	u32 ep0_state;		/* Endpoint zero state */
+	u32 ep0_dir;		/* Endpoint zero direction: can be
+				   USB_DIR_IN or USB_DIR_OUT */
+	u8 device_address;	/* Device USB address */
+};
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+#define DBG(fmt, args...) 	printk(KERN_DEBUG "[%s]  " fmt "\n", \
+				__func__, ## args)
+#else
+#define DBG(fmt, args...)	do{}while(0)
+#endif
+
+#if 0
+static void dump_msg(const char *label, const u8 * buf, unsigned int length)
+{
+	unsigned int start, num, i;
+	char line[52], *p;
+
+	if (length >= 512)
+		return;
+	DBG("%s, length %u:\n", label, length);
+	start = 0;
+	while (length > 0) {
+		num = min(length, 16u);
+		p = line;
+		for (i = 0; i < num; ++i) {
+			if (i == 8)
+				*p++ = ' ';
+			sprintf(p, " %02x", buf[i]);
+			p += 3;
+		}
+		*p = 0;
+		printk(KERN_DEBUG "%6x: %s\n", start, line);
+		buf += num;
+		start += num;
+		length -= num;
+	}
+}
+#endif
+
+#ifdef VERBOSE
+#define VDBG		DBG
+#else
+#define VDBG(stuff...)	do{}while(0)
+#endif
+
+#define ERR(stuff...)		pr_err("udc: " stuff)
+#define WARNING(stuff...)	pr_warn("udc: " stuff)
+#define INFO(stuff...)		pr_info("udc: " stuff)
+
+/*-------------------------------------------------------------------------*/
+
+/* ### Add board specific defines here
+ */
+
+/*
+ * ### pipe direction macro from device view
+ */
+#define USB_RECV	0	/* OUT EP */
+#define USB_SEND	1	/* IN EP */
+
+/*
+ * ### internal used help routines.
+ */
+#define ep_index(EP)		((EP)->ep.desc->bEndpointAddress&0xF)
+#define ep_maxpacket(EP)	((EP)->ep.maxpacket)
+#define ep_is_in(EP)	( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
+			USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
+			& USB_DIR_IN)==USB_DIR_IN)
+#define get_ep_by_pipe(udc, pipe)	((pipe == 1)? &udc->eps[0]: \
+					&udc->eps[pipe])
+#define get_pipe_by_windex(windex)	((windex & USB_ENDPOINT_NUMBER_MASK) \
+					* 2 + ((windex & USB_DIR_IN) ? 1 : 0))
+#define get_pipe_by_ep(EP)	(ep_index(EP) * 2 + ep_is_in(EP))
+
+static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep)
+{
+	/* we only have one ep0 structure but two queue heads */
+	if (ep_index(ep) != 0)
+		return ep->qh;
+	else
+		return &ep->udc->ep_qh[(ep->udc->ep0_dir ==
+				USB_DIR_IN) ? 1 : 0];
+}
+
+#endif
diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c
new file mode 100644
index 000000000..08ba9c8c1
--- /dev/null
+++ b/drivers/usb/gadget/udc/fusb300_udc.c
@@ -0,0 +1,1517 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Fusb300 UDC (USB gadget)
+ *
+ * Copyright (C) 2010 Faraday Technology Corp.
+ *
+ * Author : Yuan-hsin Chen <yhchen@faraday-tech.com>
+ */
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "fusb300_udc.h"
+
+MODULE_DESCRIPTION("FUSB300  USB gadget driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yuan-Hsin Chen, Feng-Hsin Chiang <john453@faraday-tech.com>");
+MODULE_ALIAS("platform:fusb300_udc");
+
+#define DRIVER_VERSION	"20 October 2010"
+
+static const char udc_name[] = "fusb300_udc";
+static const char * const fusb300_ep_name[] = {
+	"ep0", "ep1", "ep2", "ep3", "ep4", "ep5", "ep6", "ep7", "ep8", "ep9",
+	"ep10", "ep11", "ep12", "ep13", "ep14", "ep15"
+};
+
+static void done(struct fusb300_ep *ep, struct fusb300_request *req,
+		 int status);
+
+static void fusb300_enable_bit(struct fusb300 *fusb300, u32 offset,
+			       u32 value)
+{
+	u32 reg = ioread32(fusb300->reg + offset);
+
+	reg |= value;
+	iowrite32(reg, fusb300->reg + offset);
+}
+
+static void fusb300_disable_bit(struct fusb300 *fusb300, u32 offset,
+				u32 value)
+{
+	u32 reg = ioread32(fusb300->reg + offset);
+
+	reg &= ~value;
+	iowrite32(reg, fusb300->reg + offset);
+}
+
+
+static void fusb300_ep_setting(struct fusb300_ep *ep,
+			       struct fusb300_ep_info info)
+{
+	ep->epnum = info.epnum;
+	ep->type = info.type;
+}
+
+static int fusb300_ep_release(struct fusb300_ep *ep)
+{
+	if (!ep->epnum)
+		return 0;
+	ep->epnum = 0;
+	ep->stall = 0;
+	ep->wedged = 0;
+	return 0;
+}
+
+static void fusb300_set_fifo_entry(struct fusb300 *fusb300,
+				   u32 ep)
+{
+	u32 val = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+
+	val &= ~FUSB300_EPSET1_FIFOENTRY_MSK;
+	val |= FUSB300_EPSET1_FIFOENTRY(FUSB300_FIFO_ENTRY_NUM);
+	iowrite32(val, fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+}
+
+static void fusb300_set_start_entry(struct fusb300 *fusb300,
+				    u8 ep)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+	u32 start_entry = fusb300->fifo_entry_num * FUSB300_FIFO_ENTRY_NUM;
+
+	reg &= ~FUSB300_EPSET1_START_ENTRY_MSK	;
+	reg |= FUSB300_EPSET1_START_ENTRY(start_entry);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+	if (fusb300->fifo_entry_num == FUSB300_MAX_FIFO_ENTRY) {
+		fusb300->fifo_entry_num = 0;
+		fusb300->addrofs = 0;
+		pr_err("fifo entry is over the maximum number!\n");
+	} else
+		fusb300->fifo_entry_num++;
+}
+
+/* set fusb300_set_start_entry first before fusb300_set_epaddrofs */
+static void fusb300_set_epaddrofs(struct fusb300 *fusb300,
+				  struct fusb300_ep_info info)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum));
+
+	reg &= ~FUSB300_EPSET2_ADDROFS_MSK;
+	reg |= FUSB300_EPSET2_ADDROFS(fusb300->addrofs);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum));
+	fusb300->addrofs += (info.maxpacket + 7) / 8 * FUSB300_FIFO_ENTRY_NUM;
+}
+
+static void ep_fifo_setting(struct fusb300 *fusb300,
+			    struct fusb300_ep_info info)
+{
+	fusb300_set_fifo_entry(fusb300, info.epnum);
+	fusb300_set_start_entry(fusb300, info.epnum);
+	fusb300_set_epaddrofs(fusb300, info);
+}
+
+static void fusb300_set_eptype(struct fusb300 *fusb300,
+			       struct fusb300_ep_info info)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+
+	reg &= ~FUSB300_EPSET1_TYPE_MSK;
+	reg |= FUSB300_EPSET1_TYPE(info.type);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+}
+
+static void fusb300_set_epdir(struct fusb300 *fusb300,
+			      struct fusb300_ep_info info)
+{
+	u32 reg;
+
+	if (!info.dir_in)
+		return;
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+	reg &= ~FUSB300_EPSET1_DIR_MSK;
+	reg |= FUSB300_EPSET1_DIRIN;
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+}
+
+static void fusb300_set_ep_active(struct fusb300 *fusb300,
+			  u8 ep)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+
+	reg |= FUSB300_EPSET1_ACTEN;
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+}
+
+static void fusb300_set_epmps(struct fusb300 *fusb300,
+			      struct fusb300_ep_info info)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum));
+
+	reg &= ~FUSB300_EPSET2_MPS_MSK;
+	reg |= FUSB300_EPSET2_MPS(info.maxpacket);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum));
+}
+
+static void fusb300_set_interval(struct fusb300 *fusb300,
+				 struct fusb300_ep_info info)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+
+	reg &= ~FUSB300_EPSET1_INTERVAL(0x7);
+	reg |= FUSB300_EPSET1_INTERVAL(info.interval);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+}
+
+static void fusb300_set_bwnum(struct fusb300 *fusb300,
+			      struct fusb300_ep_info info)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+
+	reg &= ~FUSB300_EPSET1_BWNUM(0x3);
+	reg |= FUSB300_EPSET1_BWNUM(info.bw_num);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+}
+
+static void set_ep_reg(struct fusb300 *fusb300,
+		      struct fusb300_ep_info info)
+{
+	fusb300_set_eptype(fusb300, info);
+	fusb300_set_epdir(fusb300, info);
+	fusb300_set_epmps(fusb300, info);
+
+	if (info.interval)
+		fusb300_set_interval(fusb300, info);
+
+	if (info.bw_num)
+		fusb300_set_bwnum(fusb300, info);
+
+	fusb300_set_ep_active(fusb300, info.epnum);
+}
+
+static int config_ep(struct fusb300_ep *ep,
+		     const struct usb_endpoint_descriptor *desc)
+{
+	struct fusb300 *fusb300 = ep->fusb300;
+	struct fusb300_ep_info info;
+
+	ep->ep.desc = desc;
+
+	info.interval = 0;
+	info.addrofs = 0;
+	info.bw_num = 0;
+
+	info.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	info.dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0;
+	info.maxpacket = usb_endpoint_maxp(desc);
+	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+
+	if ((info.type == USB_ENDPOINT_XFER_INT) ||
+	   (info.type == USB_ENDPOINT_XFER_ISOC)) {
+		info.interval = desc->bInterval;
+		if (info.type == USB_ENDPOINT_XFER_ISOC)
+			info.bw_num = usb_endpoint_maxp_mult(desc);
+	}
+
+	ep_fifo_setting(fusb300, info);
+
+	set_ep_reg(fusb300, info);
+
+	fusb300_ep_setting(ep, info);
+
+	fusb300->ep[info.epnum] = ep;
+
+	return 0;
+}
+
+static int fusb300_enable(struct usb_ep *_ep,
+			  const struct usb_endpoint_descriptor *desc)
+{
+	struct fusb300_ep *ep;
+
+	ep = container_of(_ep, struct fusb300_ep, ep);
+
+	if (ep->fusb300->reenum) {
+		ep->fusb300->fifo_entry_num = 0;
+		ep->fusb300->addrofs = 0;
+		ep->fusb300->reenum = 0;
+	}
+
+	return config_ep(ep, desc);
+}
+
+static int fusb300_disable(struct usb_ep *_ep)
+{
+	struct fusb300_ep *ep;
+	struct fusb300_request *req;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct fusb300_ep, ep);
+
+	BUG_ON(!ep);
+
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct fusb300_request, queue);
+		spin_lock_irqsave(&ep->fusb300->lock, flags);
+		done(ep, req, -ECONNRESET);
+		spin_unlock_irqrestore(&ep->fusb300->lock, flags);
+	}
+
+	return fusb300_ep_release(ep);
+}
+
+static struct usb_request *fusb300_alloc_request(struct usb_ep *_ep,
+						gfp_t gfp_flags)
+{
+	struct fusb300_request *req;
+
+	req = kzalloc(sizeof(struct fusb300_request), gfp_flags);
+	if (!req)
+		return NULL;
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void fusb300_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct fusb300_request *req;
+
+	req = container_of(_req, struct fusb300_request, req);
+	kfree(req);
+}
+
+static int enable_fifo_int(struct fusb300_ep *ep)
+{
+	struct fusb300 *fusb300 = ep->fusb300;
+
+	if (ep->epnum) {
+		fusb300_enable_bit(fusb300, FUSB300_OFFSET_IGER0,
+			FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum));
+	} else {
+		pr_err("can't enable_fifo_int ep0\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int disable_fifo_int(struct fusb300_ep *ep)
+{
+	struct fusb300 *fusb300 = ep->fusb300;
+
+	if (ep->epnum) {
+		fusb300_disable_bit(fusb300, FUSB300_OFFSET_IGER0,
+			FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum));
+	} else {
+		pr_err("can't disable_fifo_int ep0\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void fusb300_set_cxlen(struct fusb300 *fusb300, u32 length)
+{
+	u32 reg;
+
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR);
+	reg &= ~FUSB300_CSR_LEN_MSK;
+	reg |= FUSB300_CSR_LEN(length);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_CSR);
+}
+
+/* write data to cx fifo */
+static void fusb300_wrcxf(struct fusb300_ep *ep,
+		   struct fusb300_request *req)
+{
+	int i = 0;
+	u8 *tmp;
+	u32 data;
+	struct fusb300 *fusb300 = ep->fusb300;
+	u32 length = req->req.length - req->req.actual;
+
+	tmp = req->req.buf + req->req.actual;
+
+	if (length > SS_CTL_MAX_PACKET_SIZE) {
+		fusb300_set_cxlen(fusb300, SS_CTL_MAX_PACKET_SIZE);
+		for (i = (SS_CTL_MAX_PACKET_SIZE >> 2); i > 0; i--) {
+			data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 |
+				*(tmp + 3) << 24;
+			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
+			tmp += 4;
+		}
+		req->req.actual += SS_CTL_MAX_PACKET_SIZE;
+	} else { /* length is less than max packet size */
+		fusb300_set_cxlen(fusb300, length);
+		for (i = length >> 2; i > 0; i--) {
+			data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 |
+				*(tmp + 3) << 24;
+			printk(KERN_DEBUG "    0x%x\n", data);
+			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
+			tmp = tmp + 4;
+		}
+		switch (length % 4) {
+		case 1:
+			data = *tmp;
+			printk(KERN_DEBUG "    0x%x\n", data);
+			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
+			break;
+		case 2:
+			data = *tmp | *(tmp + 1) << 8;
+			printk(KERN_DEBUG "    0x%x\n", data);
+			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
+			break;
+		case 3:
+			data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16;
+			printk(KERN_DEBUG "    0x%x\n", data);
+			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
+			break;
+		default:
+			break;
+		}
+		req->req.actual += length;
+	}
+}
+
+static void fusb300_set_epnstall(struct fusb300 *fusb300, u8 ep)
+{
+	fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep),
+		FUSB300_EPSET0_STL);
+}
+
+static void fusb300_clear_epnstall(struct fusb300 *fusb300, u8 ep)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep));
+
+	if (reg & FUSB300_EPSET0_STL) {
+		printk(KERN_DEBUG "EP%d stall... Clear!!\n", ep);
+		reg |= FUSB300_EPSET0_STL_CLR;
+		iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET0(ep));
+	}
+}
+
+static void ep0_queue(struct fusb300_ep *ep, struct fusb300_request *req)
+{
+	if (ep->fusb300->ep0_dir) { /* if IN */
+		if (req->req.length) {
+			fusb300_wrcxf(ep, req);
+		} else
+			printk(KERN_DEBUG "%s : req->req.length = 0x%x\n",
+				__func__, req->req.length);
+		if ((req->req.length == req->req.actual) ||
+		    (req->req.actual < ep->ep.maxpacket))
+			done(ep, req, 0);
+	} else { /* OUT */
+		if (!req->req.length)
+			done(ep, req, 0);
+		else
+			fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER1,
+				FUSB300_IGER1_CX_OUT_INT);
+	}
+}
+
+static int fusb300_queue(struct usb_ep *_ep, struct usb_request *_req,
+			 gfp_t gfp_flags)
+{
+	struct fusb300_ep *ep;
+	struct fusb300_request *req;
+	unsigned long flags;
+	int request  = 0;
+
+	ep = container_of(_ep, struct fusb300_ep, ep);
+	req = container_of(_req, struct fusb300_request, req);
+
+	if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&ep->fusb300->lock, flags);
+
+	if (list_empty(&ep->queue))
+		request = 1;
+
+	list_add_tail(&req->queue, &ep->queue);
+
+	req->req.actual = 0;
+	req->req.status = -EINPROGRESS;
+
+	if (ep->ep.desc == NULL) /* ep0 */
+		ep0_queue(ep, req);
+	else if (request && !ep->stall)
+		enable_fifo_int(ep);
+
+	spin_unlock_irqrestore(&ep->fusb300->lock, flags);
+
+	return 0;
+}
+
+static int fusb300_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct fusb300_ep *ep;
+	struct fusb300_request *req;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct fusb300_ep, ep);
+	req = container_of(_req, struct fusb300_request, req);
+
+	spin_lock_irqsave(&ep->fusb300->lock, flags);
+	if (!list_empty(&ep->queue))
+		done(ep, req, -ECONNRESET);
+	spin_unlock_irqrestore(&ep->fusb300->lock, flags);
+
+	return 0;
+}
+
+static int fusb300_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedge)
+{
+	struct fusb300_ep *ep;
+	struct fusb300 *fusb300;
+	unsigned long flags;
+	int ret = 0;
+
+	ep = container_of(_ep, struct fusb300_ep, ep);
+
+	fusb300 = ep->fusb300;
+
+	spin_lock_irqsave(&ep->fusb300->lock, flags);
+
+	if (!list_empty(&ep->queue)) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	if (value) {
+		fusb300_set_epnstall(fusb300, ep->epnum);
+		ep->stall = 1;
+		if (wedge)
+			ep->wedged = 1;
+	} else {
+		fusb300_clear_epnstall(fusb300, ep->epnum);
+		ep->stall = 0;
+		ep->wedged = 0;
+	}
+
+out:
+	spin_unlock_irqrestore(&ep->fusb300->lock, flags);
+	return ret;
+}
+
+static int fusb300_set_halt(struct usb_ep *_ep, int value)
+{
+	return fusb300_set_halt_and_wedge(_ep, value, 0);
+}
+
+static int fusb300_set_wedge(struct usb_ep *_ep)
+{
+	return fusb300_set_halt_and_wedge(_ep, 1, 1);
+}
+
+static void fusb300_fifo_flush(struct usb_ep *_ep)
+{
+}
+
+static const struct usb_ep_ops fusb300_ep_ops = {
+	.enable		= fusb300_enable,
+	.disable	= fusb300_disable,
+
+	.alloc_request	= fusb300_alloc_request,
+	.free_request	= fusb300_free_request,
+
+	.queue		= fusb300_queue,
+	.dequeue	= fusb300_dequeue,
+
+	.set_halt	= fusb300_set_halt,
+	.fifo_flush	= fusb300_fifo_flush,
+	.set_wedge	= fusb300_set_wedge,
+};
+
+/*****************************************************************************/
+static void fusb300_clear_int(struct fusb300 *fusb300, u32 offset,
+		       u32 value)
+{
+	iowrite32(value, fusb300->reg + offset);
+}
+
+static void fusb300_reset(void)
+{
+}
+
+static void fusb300_set_cxstall(struct fusb300 *fusb300)
+{
+	fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR,
+			   FUSB300_CSR_STL);
+}
+
+static void fusb300_set_cxdone(struct fusb300 *fusb300)
+{
+	fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR,
+			   FUSB300_CSR_DONE);
+}
+
+/* read data from cx fifo */
+static void fusb300_rdcxf(struct fusb300 *fusb300,
+		   u8 *buffer, u32 length)
+{
+	int i = 0;
+	u8 *tmp;
+	u32 data;
+
+	tmp = buffer;
+
+	for (i = (length >> 2); i > 0; i--) {
+		data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT);
+		printk(KERN_DEBUG "    0x%x\n", data);
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		*(tmp + 2) = (data >> 16) & 0xFF;
+		*(tmp + 3) = (data >> 24) & 0xFF;
+		tmp = tmp + 4;
+	}
+
+	switch (length % 4) {
+	case 1:
+		data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT);
+		printk(KERN_DEBUG "    0x%x\n", data);
+		*tmp = data & 0xFF;
+		break;
+	case 2:
+		data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT);
+		printk(KERN_DEBUG "    0x%x\n", data);
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		break;
+	case 3:
+		data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT);
+		printk(KERN_DEBUG "    0x%x\n", data);
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		*(tmp + 2) = (data >> 16) & 0xFF;
+		break;
+	default:
+		break;
+	}
+}
+
+static void fusb300_rdfifo(struct fusb300_ep *ep,
+			  struct fusb300_request *req,
+			  u32 length)
+{
+	int i = 0;
+	u8 *tmp;
+	u32 data, reg;
+	struct fusb300 *fusb300 = ep->fusb300;
+
+	tmp = req->req.buf + req->req.actual;
+	req->req.actual += length;
+
+	if (req->req.actual > req->req.length)
+		printk(KERN_DEBUG "req->req.actual > req->req.length\n");
+
+	for (i = (length >> 2); i > 0; i--) {
+		data = ioread32(fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		*(tmp + 2) = (data >> 16) & 0xFF;
+		*(tmp + 3) = (data >> 24) & 0xFF;
+		tmp = tmp + 4;
+	}
+
+	switch (length % 4) {
+	case 1:
+		data = ioread32(fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		*tmp = data & 0xFF;
+		break;
+	case 2:
+		data = ioread32(fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		break;
+	case 3:
+		data = ioread32(fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		*(tmp + 2) = (data >> 16) & 0xFF;
+		break;
+	default:
+		break;
+	}
+
+	do {
+		reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1);
+		reg &= FUSB300_IGR1_SYNF0_EMPTY_INT;
+		if (i)
+			printk(KERN_INFO "sync fifo is not empty!\n");
+		i++;
+	} while (!reg);
+}
+
+static u8 fusb300_get_epnstall(struct fusb300 *fusb300, u8 ep)
+{
+	u8 value;
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep));
+
+	value = reg & FUSB300_EPSET0_STL;
+
+	return value;
+}
+
+static u8 fusb300_get_cxstall(struct fusb300 *fusb300)
+{
+	u8 value;
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR);
+
+	value = (reg & FUSB300_CSR_STL) >> 1;
+
+	return value;
+}
+
+static void request_error(struct fusb300 *fusb300)
+{
+	fusb300_set_cxstall(fusb300);
+	printk(KERN_DEBUG "request error!!\n");
+}
+
+static void get_status(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
+__releases(fusb300->lock)
+__acquires(fusb300->lock)
+{
+	u8 ep;
+	u16 status = 0;
+	u16 w_index = ctrl->wIndex;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		status = 1 << USB_DEVICE_SELF_POWERED;
+		break;
+	case USB_RECIP_INTERFACE:
+		status = 0;
+		break;
+	case USB_RECIP_ENDPOINT:
+		ep = w_index & USB_ENDPOINT_NUMBER_MASK;
+		if (ep) {
+			if (fusb300_get_epnstall(fusb300, ep))
+				status = 1 << USB_ENDPOINT_HALT;
+		} else {
+			if (fusb300_get_cxstall(fusb300))
+				status = 0;
+		}
+		break;
+
+	default:
+		request_error(fusb300);
+		return;		/* exit */
+	}
+
+	fusb300->ep0_data = cpu_to_le16(status);
+	fusb300->ep0_req->buf = &fusb300->ep0_data;
+	fusb300->ep0_req->length = 2;
+
+	spin_unlock(&fusb300->lock);
+	fusb300_queue(fusb300->gadget.ep0, fusb300->ep0_req, GFP_KERNEL);
+	spin_lock(&fusb300->lock);
+}
+
+static void set_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
+{
+	u8 ep;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		fusb300_set_cxdone(fusb300);
+		break;
+	case USB_RECIP_INTERFACE:
+		fusb300_set_cxdone(fusb300);
+		break;
+	case USB_RECIP_ENDPOINT: {
+		u16 w_index = le16_to_cpu(ctrl->wIndex);
+
+		ep = w_index & USB_ENDPOINT_NUMBER_MASK;
+		if (ep)
+			fusb300_set_epnstall(fusb300, ep);
+		else
+			fusb300_set_cxstall(fusb300);
+		fusb300_set_cxdone(fusb300);
+		}
+		break;
+	default:
+		request_error(fusb300);
+		break;
+	}
+}
+
+static void fusb300_clear_seqnum(struct fusb300 *fusb300, u8 ep)
+{
+	fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep),
+			    FUSB300_EPSET0_CLRSEQNUM);
+}
+
+static void clear_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
+{
+	struct fusb300_ep *ep =
+		fusb300->ep[ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK];
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		fusb300_set_cxdone(fusb300);
+		break;
+	case USB_RECIP_INTERFACE:
+		fusb300_set_cxdone(fusb300);
+		break;
+	case USB_RECIP_ENDPOINT:
+		if (ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK) {
+			if (ep->wedged) {
+				fusb300_set_cxdone(fusb300);
+				break;
+			}
+			if (ep->stall) {
+				ep->stall = 0;
+				fusb300_clear_seqnum(fusb300, ep->epnum);
+				fusb300_clear_epnstall(fusb300, ep->epnum);
+				if (!list_empty(&ep->queue))
+					enable_fifo_int(ep);
+			}
+		}
+		fusb300_set_cxdone(fusb300);
+		break;
+	default:
+		request_error(fusb300);
+		break;
+	}
+}
+
+static void fusb300_set_dev_addr(struct fusb300 *fusb300, u16 addr)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_DAR);
+
+	reg &= ~FUSB300_DAR_DRVADDR_MSK;
+	reg |= FUSB300_DAR_DRVADDR(addr);
+
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_DAR);
+}
+
+static void set_address(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
+{
+	if (ctrl->wValue >= 0x0100)
+		request_error(fusb300);
+	else {
+		fusb300_set_dev_addr(fusb300, ctrl->wValue);
+		fusb300_set_cxdone(fusb300);
+	}
+}
+
+#define UVC_COPY_DESCRIPTORS(mem, src) \
+	do { \
+		const struct usb_descriptor_header * const *__src; \
+		for (__src = src; *__src; ++__src) { \
+			memcpy(mem, *__src, (*__src)->bLength); \
+			mem += (*__src)->bLength; \
+		} \
+	} while (0)
+
+static int setup_packet(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
+{
+	u8 *p = (u8 *)ctrl;
+	u8 ret = 0;
+	u8 i = 0;
+
+	fusb300_rdcxf(fusb300, p, 8);
+	fusb300->ep0_dir = ctrl->bRequestType & USB_DIR_IN;
+	fusb300->ep0_length = ctrl->wLength;
+
+	/* check request */
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (ctrl->bRequest) {
+		case USB_REQ_GET_STATUS:
+			get_status(fusb300, ctrl);
+			break;
+		case USB_REQ_CLEAR_FEATURE:
+			clear_feature(fusb300, ctrl);
+			break;
+		case USB_REQ_SET_FEATURE:
+			set_feature(fusb300, ctrl);
+			break;
+		case USB_REQ_SET_ADDRESS:
+			set_address(fusb300, ctrl);
+			break;
+		case USB_REQ_SET_CONFIGURATION:
+			fusb300_enable_bit(fusb300, FUSB300_OFFSET_DAR,
+					   FUSB300_DAR_SETCONFG);
+			/* clear sequence number */
+			for (i = 1; i <= FUSB300_MAX_NUM_EP; i++)
+				fusb300_clear_seqnum(fusb300, i);
+			fusb300->reenum = 1;
+			ret = 1;
+			break;
+		default:
+			ret = 1;
+			break;
+		}
+	} else
+		ret = 1;
+
+	return ret;
+}
+
+static void done(struct fusb300_ep *ep, struct fusb300_request *req,
+		 int status)
+{
+	list_del_init(&req->queue);
+
+	/* don't modify queue heads during completion callback */
+	if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN)
+		req->req.status = -ESHUTDOWN;
+	else
+		req->req.status = status;
+
+	spin_unlock(&ep->fusb300->lock);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&ep->fusb300->lock);
+
+	if (ep->epnum) {
+		disable_fifo_int(ep);
+		if (!list_empty(&ep->queue))
+			enable_fifo_int(ep);
+	} else
+		fusb300_set_cxdone(ep->fusb300);
+}
+
+static void fusb300_fill_idma_prdtbl(struct fusb300_ep *ep, dma_addr_t d,
+		u32 len)
+{
+	u32 value;
+	u32 reg;
+
+	/* wait SW owner */
+	do {
+		reg = ioread32(ep->fusb300->reg +
+			FUSB300_OFFSET_EPPRD_W0(ep->epnum));
+		reg &= FUSB300_EPPRD0_H;
+	} while (reg);
+
+	iowrite32(d, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W1(ep->epnum));
+
+	value = FUSB300_EPPRD0_BTC(len) | FUSB300_EPPRD0_H |
+		FUSB300_EPPRD0_F | FUSB300_EPPRD0_L | FUSB300_EPPRD0_I;
+	iowrite32(value, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W0(ep->epnum));
+
+	iowrite32(0x0, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W2(ep->epnum));
+
+	fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_EPPRDRDY,
+		FUSB300_EPPRDR_EP_PRD_RDY(ep->epnum));
+}
+
+static void fusb300_wait_idma_finished(struct fusb300_ep *ep)
+{
+	u32 reg;
+
+	do {
+		reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR1);
+		if ((reg & FUSB300_IGR1_VBUS_CHG_INT) ||
+		    (reg & FUSB300_IGR1_WARM_RST_INT) ||
+		    (reg & FUSB300_IGR1_HOT_RST_INT) ||
+		    (reg & FUSB300_IGR1_USBRST_INT)
+		)
+			goto IDMA_RESET;
+		reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR0);
+		reg &= FUSB300_IGR0_EPn_PRD_INT(ep->epnum);
+	} while (!reg);
+
+	fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGR0,
+		FUSB300_IGR0_EPn_PRD_INT(ep->epnum));
+	return;
+
+IDMA_RESET:
+	reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGER0);
+	reg &= ~FUSB300_IGER0_EEPn_PRD_INT(ep->epnum);
+	iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_IGER0);
+}
+
+static void fusb300_set_idma(struct fusb300_ep *ep,
+			struct fusb300_request *req)
+{
+	int ret;
+
+	ret = usb_gadget_map_request(&ep->fusb300->gadget,
+			&req->req, DMA_TO_DEVICE);
+	if (ret)
+		return;
+
+	fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER0,
+		FUSB300_IGER0_EEPn_PRD_INT(ep->epnum));
+
+	fusb300_fill_idma_prdtbl(ep, req->req.dma, req->req.length);
+	/* check idma is done */
+	fusb300_wait_idma_finished(ep);
+
+	usb_gadget_unmap_request(&ep->fusb300->gadget,
+			&req->req, DMA_TO_DEVICE);
+}
+
+static void in_ep_fifo_handler(struct fusb300_ep *ep)
+{
+	struct fusb300_request *req = list_entry(ep->queue.next,
+					struct fusb300_request, queue);
+
+	if (req->req.length)
+		fusb300_set_idma(ep, req);
+	done(ep, req, 0);
+}
+
+static void out_ep_fifo_handler(struct fusb300_ep *ep)
+{
+	struct fusb300 *fusb300 = ep->fusb300;
+	struct fusb300_request *req = list_entry(ep->queue.next,
+						 struct fusb300_request, queue);
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum));
+	u32 length = reg & FUSB300_FFR_BYCNT;
+
+	fusb300_rdfifo(ep, req, length);
+
+	/* finish out transfer */
+	if ((req->req.length == req->req.actual) || (length < ep->ep.maxpacket))
+		done(ep, req, 0);
+}
+
+static void check_device_mode(struct fusb300 *fusb300)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_GCR);
+
+	switch (reg & FUSB300_GCR_DEVEN_MSK) {
+	case FUSB300_GCR_DEVEN_SS:
+		fusb300->gadget.speed = USB_SPEED_SUPER;
+		break;
+	case FUSB300_GCR_DEVEN_HS:
+		fusb300->gadget.speed = USB_SPEED_HIGH;
+		break;
+	case FUSB300_GCR_DEVEN_FS:
+		fusb300->gadget.speed = USB_SPEED_FULL;
+		break;
+	default:
+		fusb300->gadget.speed = USB_SPEED_UNKNOWN;
+		break;
+	}
+	printk(KERN_INFO "dev_mode = %d\n", (reg & FUSB300_GCR_DEVEN_MSK));
+}
+
+
+static void fusb300_ep0out(struct fusb300 *fusb300)
+{
+	struct fusb300_ep *ep = fusb300->ep[0];
+	u32 reg;
+
+	if (!list_empty(&ep->queue)) {
+		struct fusb300_request *req;
+
+		req = list_first_entry(&ep->queue,
+			struct fusb300_request, queue);
+		if (req->req.length)
+			fusb300_rdcxf(ep->fusb300, req->req.buf,
+				req->req.length);
+		done(ep, req, 0);
+		reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1);
+		reg &= ~FUSB300_IGER1_CX_OUT_INT;
+		iowrite32(reg, fusb300->reg + FUSB300_OFFSET_IGER1);
+	} else
+		pr_err("%s : empty queue\n", __func__);
+}
+
+static void fusb300_ep0in(struct fusb300 *fusb300)
+{
+	struct fusb300_request *req;
+	struct fusb300_ep *ep = fusb300->ep[0];
+
+	if ((!list_empty(&ep->queue)) && (fusb300->ep0_dir)) {
+		req = list_entry(ep->queue.next,
+				struct fusb300_request, queue);
+		if (req->req.length)
+			fusb300_wrcxf(ep, req);
+		if ((req->req.length - req->req.actual) < ep->ep.maxpacket)
+			done(ep, req, 0);
+	} else
+		fusb300_set_cxdone(fusb300);
+}
+
+static void fusb300_grp2_handler(void)
+{
+}
+
+static void fusb300_grp3_handler(void)
+{
+}
+
+static void fusb300_grp4_handler(void)
+{
+}
+
+static void fusb300_grp5_handler(void)
+{
+}
+
+static irqreturn_t fusb300_irq(int irq, void *_fusb300)
+{
+	struct fusb300 *fusb300 = _fusb300;
+	u32 int_grp1 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1);
+	u32 int_grp1_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1);
+	u32 int_grp0 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR0);
+	u32 int_grp0_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER0);
+	struct usb_ctrlrequest ctrl;
+	u8 in;
+	u32 reg;
+	int i;
+
+	spin_lock(&fusb300->lock);
+
+	int_grp1 &= int_grp1_en;
+	int_grp0 &= int_grp0_en;
+
+	if (int_grp1 & FUSB300_IGR1_WARM_RST_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_WARM_RST_INT);
+		printk(KERN_INFO"fusb300_warmreset\n");
+		fusb300_reset();
+	}
+
+	if (int_grp1 & FUSB300_IGR1_HOT_RST_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_HOT_RST_INT);
+		printk(KERN_INFO"fusb300_hotreset\n");
+		fusb300_reset();
+	}
+
+	if (int_grp1 & FUSB300_IGR1_USBRST_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_USBRST_INT);
+		fusb300_reset();
+	}
+	/* COMABT_INT has a highest priority */
+
+	if (int_grp1 & FUSB300_IGR1_CX_COMABT_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_CX_COMABT_INT);
+		printk(KERN_INFO"fusb300_ep0abt\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_VBUS_CHG_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_VBUS_CHG_INT);
+		printk(KERN_INFO"fusb300_vbus_change\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U3_EXIT_FAIL_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U3_EXIT_FAIL_INT);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U2_EXIT_FAIL_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U2_EXIT_FAIL_INT);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U1_EXIT_FAIL_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U1_EXIT_FAIL_INT);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U2_ENTRY_FAIL_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U2_ENTRY_FAIL_INT);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U1_ENTRY_FAIL_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U1_ENTRY_FAIL_INT);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U3_EXIT_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U3_EXIT_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U3_EXIT_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U2_EXIT_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U2_EXIT_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U2_EXIT_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U1_EXIT_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U1_EXIT_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U1_EXIT_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U3_ENTRY_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U3_ENTRY_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U3_ENTRY_INT\n");
+		fusb300_enable_bit(fusb300, FUSB300_OFFSET_SSCR1,
+				   FUSB300_SSCR1_GO_U3_DONE);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U2_ENTRY_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U2_ENTRY_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U2_ENTRY_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U1_ENTRY_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U1_ENTRY_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U1_ENTRY_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_RESM_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_RESM_INT);
+		printk(KERN_INFO "fusb300_resume\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_SUSP_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_SUSP_INT);
+		printk(KERN_INFO "fusb300_suspend\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_HS_LPM_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_HS_LPM_INT);
+		printk(KERN_INFO "fusb300_HS_LPM_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_DEV_MODE_CHG_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_DEV_MODE_CHG_INT);
+		check_device_mode(fusb300);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_CX_COMFAIL_INT) {
+		fusb300_set_cxstall(fusb300);
+		printk(KERN_INFO "fusb300_ep0fail\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_CX_SETUP_INT) {
+		printk(KERN_INFO "fusb300_ep0setup\n");
+		if (setup_packet(fusb300, &ctrl)) {
+			spin_unlock(&fusb300->lock);
+			if (fusb300->driver->setup(&fusb300->gadget, &ctrl) < 0)
+				fusb300_set_cxstall(fusb300);
+			spin_lock(&fusb300->lock);
+		}
+	}
+
+	if (int_grp1 & FUSB300_IGR1_CX_CMDEND_INT)
+		printk(KERN_INFO "fusb300_cmdend\n");
+
+
+	if (int_grp1 & FUSB300_IGR1_CX_OUT_INT) {
+		printk(KERN_INFO "fusb300_cxout\n");
+		fusb300_ep0out(fusb300);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_CX_IN_INT) {
+		printk(KERN_INFO "fusb300_cxin\n");
+		fusb300_ep0in(fusb300);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_INTGRP5)
+		fusb300_grp5_handler();
+
+	if (int_grp1 & FUSB300_IGR1_INTGRP4)
+		fusb300_grp4_handler();
+
+	if (int_grp1 & FUSB300_IGR1_INTGRP3)
+		fusb300_grp3_handler();
+
+	if (int_grp1 & FUSB300_IGR1_INTGRP2)
+		fusb300_grp2_handler();
+
+	if (int_grp0) {
+		for (i = 1; i < FUSB300_MAX_NUM_EP; i++) {
+			if (int_grp0 & FUSB300_IGR0_EPn_FIFO_INT(i)) {
+				reg = ioread32(fusb300->reg +
+					FUSB300_OFFSET_EPSET1(i));
+				in = (reg & FUSB300_EPSET1_DIRIN) ? 1 : 0;
+				if (in)
+					in_ep_fifo_handler(fusb300->ep[i]);
+				else
+					out_ep_fifo_handler(fusb300->ep[i]);
+			}
+		}
+	}
+
+	spin_unlock(&fusb300->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void fusb300_set_u2_timeout(struct fusb300 *fusb300,
+				   u32 time)
+{
+	u32 reg;
+
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT);
+	reg &= ~0xff;
+	reg |= FUSB300_SSCR2_U2TIMEOUT(time);
+
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT);
+}
+
+static void fusb300_set_u1_timeout(struct fusb300 *fusb300,
+				   u32 time)
+{
+	u32 reg;
+
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT);
+	reg &= ~(0xff << 8);
+	reg |= FUSB300_SSCR2_U1TIMEOUT(time);
+
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT);
+}
+
+static void init_controller(struct fusb300 *fusb300)
+{
+	u32 reg;
+	u32 mask = 0;
+	u32 val = 0;
+
+	/* split on */
+	mask = val = FUSB300_AHBBCR_S0_SPLIT_ON | FUSB300_AHBBCR_S1_SPLIT_ON;
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_AHBCR);
+	reg &= ~mask;
+	reg |= val;
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_AHBCR);
+
+	/* enable high-speed LPM */
+	mask = val = FUSB300_HSCR_HS_LPM_PERMIT;
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_HSCR);
+	reg &= ~mask;
+	reg |= val;
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_HSCR);
+
+	/*set u1 u2 timmer*/
+	fusb300_set_u2_timeout(fusb300, 0xff);
+	fusb300_set_u1_timeout(fusb300, 0xff);
+
+	/* enable all grp1 interrupt */
+	iowrite32(0xcfffff9f, fusb300->reg + FUSB300_OFFSET_IGER1);
+}
+/*------------------------------------------------------------------------*/
+static int fusb300_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct fusb300 *fusb300 = to_fusb300(g);
+
+	/* hook up the driver */
+	fusb300->driver = driver;
+
+	return 0;
+}
+
+static int fusb300_udc_stop(struct usb_gadget *g)
+{
+	struct fusb300 *fusb300 = to_fusb300(g);
+
+	init_controller(fusb300);
+	fusb300->driver = NULL;
+
+	return 0;
+}
+/*--------------------------------------------------------------------------*/
+
+static int fusb300_udc_pullup(struct usb_gadget *_gadget, int is_active)
+{
+	return 0;
+}
+
+static const struct usb_gadget_ops fusb300_gadget_ops = {
+	.pullup		= fusb300_udc_pullup,
+	.udc_start	= fusb300_udc_start,
+	.udc_stop	= fusb300_udc_stop,
+};
+
+static int fusb300_remove(struct platform_device *pdev)
+{
+	struct fusb300 *fusb300 = platform_get_drvdata(pdev);
+	int i;
+
+	usb_del_gadget_udc(&fusb300->gadget);
+	iounmap(fusb300->reg);
+	free_irq(platform_get_irq(pdev, 0), fusb300);
+	free_irq(platform_get_irq(pdev, 1), fusb300);
+
+	fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
+	for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
+		kfree(fusb300->ep[i]);
+	kfree(fusb300);
+
+	return 0;
+}
+
+static int fusb300_probe(struct platform_device *pdev)
+{
+	struct resource *res, *ires, *ires1;
+	void __iomem *reg = NULL;
+	struct fusb300 *fusb300 = NULL;
+	struct fusb300_ep *_ep[FUSB300_MAX_NUM_EP];
+	int ret = 0;
+	int i;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENODEV;
+		pr_err("platform_get_resource error.\n");
+		goto clean_up;
+	}
+
+	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!ires) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev,
+			"platform_get_resource IORESOURCE_IRQ error.\n");
+		goto clean_up;
+	}
+
+	ires1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+	if (!ires1) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev,
+			"platform_get_resource IORESOURCE_IRQ 1 error.\n");
+		goto clean_up;
+	}
+
+	reg = ioremap(res->start, resource_size(res));
+	if (reg == NULL) {
+		ret = -ENOMEM;
+		pr_err("ioremap error.\n");
+		goto clean_up;
+	}
+
+	/* initialize udc */
+	fusb300 = kzalloc(sizeof(struct fusb300), GFP_KERNEL);
+	if (fusb300 == NULL) {
+		ret = -ENOMEM;
+		goto clean_up;
+	}
+
+	for (i = 0; i < FUSB300_MAX_NUM_EP; i++) {
+		_ep[i] = kzalloc(sizeof(struct fusb300_ep), GFP_KERNEL);
+		if (_ep[i] == NULL) {
+			ret = -ENOMEM;
+			goto clean_up;
+		}
+		fusb300->ep[i] = _ep[i];
+	}
+
+	spin_lock_init(&fusb300->lock);
+
+	platform_set_drvdata(pdev, fusb300);
+
+	fusb300->gadget.ops = &fusb300_gadget_ops;
+
+	fusb300->gadget.max_speed = USB_SPEED_HIGH;
+	fusb300->gadget.name = udc_name;
+	fusb300->reg = reg;
+
+	ret = request_irq(ires->start, fusb300_irq, IRQF_SHARED,
+			  udc_name, fusb300);
+	if (ret < 0) {
+		pr_err("request_irq error (%d)\n", ret);
+		goto clean_up;
+	}
+
+	ret = request_irq(ires1->start, fusb300_irq,
+			IRQF_SHARED, udc_name, fusb300);
+	if (ret < 0) {
+		pr_err("request_irq1 error (%d)\n", ret);
+		goto err_request_irq1;
+	}
+
+	INIT_LIST_HEAD(&fusb300->gadget.ep_list);
+
+	for (i = 0; i < FUSB300_MAX_NUM_EP ; i++) {
+		struct fusb300_ep *ep = fusb300->ep[i];
+
+		if (i != 0) {
+			INIT_LIST_HEAD(&fusb300->ep[i]->ep.ep_list);
+			list_add_tail(&fusb300->ep[i]->ep.ep_list,
+				     &fusb300->gadget.ep_list);
+		}
+		ep->fusb300 = fusb300;
+		INIT_LIST_HEAD(&ep->queue);
+		ep->ep.name = fusb300_ep_name[i];
+		ep->ep.ops = &fusb300_ep_ops;
+		usb_ep_set_maxpacket_limit(&ep->ep, HS_BULK_MAX_PACKET_SIZE);
+
+		if (i == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
+	}
+	usb_ep_set_maxpacket_limit(&fusb300->ep[0]->ep, HS_CTL_MAX_PACKET_SIZE);
+	fusb300->ep[0]->epnum = 0;
+	fusb300->gadget.ep0 = &fusb300->ep[0]->ep;
+	INIT_LIST_HEAD(&fusb300->gadget.ep0->ep_list);
+
+	fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep,
+				GFP_KERNEL);
+	if (fusb300->ep0_req == NULL) {
+		ret = -ENOMEM;
+		goto err_alloc_request;
+	}
+
+	init_controller(fusb300);
+	ret = usb_add_gadget_udc(&pdev->dev, &fusb300->gadget);
+	if (ret)
+		goto err_add_udc;
+
+	dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
+
+	return 0;
+
+err_add_udc:
+	fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
+
+err_alloc_request:
+	free_irq(ires1->start, fusb300);
+
+err_request_irq1:
+	free_irq(ires->start, fusb300);
+
+clean_up:
+	if (fusb300) {
+		if (fusb300->ep0_req)
+			fusb300_free_request(&fusb300->ep[0]->ep,
+				fusb300->ep0_req);
+		for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
+			kfree(fusb300->ep[i]);
+		kfree(fusb300);
+	}
+	if (reg)
+		iounmap(reg);
+
+	return ret;
+}
+
+static struct platform_driver fusb300_driver = {
+	.remove =	fusb300_remove,
+	.driver		= {
+		.name =	udc_name,
+	},
+};
+
+module_platform_driver_probe(fusb300_driver, fusb300_probe);
diff --git a/drivers/usb/gadget/udc/fusb300_udc.h b/drivers/usb/gadget/udc/fusb300_udc.h
new file mode 100644
index 000000000..eb3d6d379
--- /dev/null
+++ b/drivers/usb/gadget/udc/fusb300_udc.h
@@ -0,0 +1,675 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Fusb300 UDC (USB gadget)
+ *
+ * Copyright (C) 2010 Faraday Technology Corp.
+ *
+ * Author : Yuan-hsin Chen <yhchen@faraday-tech.com>
+ */
+
+
+#ifndef __FUSB300_UDC_H__
+#define __FUSB300_UDC_H__
+
+#include <linux/kernel.h>
+
+#define FUSB300_OFFSET_GCR		0x00
+#define FUSB300_OFFSET_GTM		0x04
+#define FUSB300_OFFSET_DAR		0x08
+#define FUSB300_OFFSET_CSR		0x0C
+#define FUSB300_OFFSET_CXPORT		0x10
+#define FUSB300_OFFSET_EPSET0(n)	(0x20 + (n - 1) * 0x30)
+#define FUSB300_OFFSET_EPSET1(n)	(0x24 + (n - 1) * 0x30)
+#define FUSB300_OFFSET_EPSET2(n)	(0x28 + (n - 1) * 0x30)
+#define FUSB300_OFFSET_EPFFR(n)		(0x2c + (n - 1) * 0x30)
+#define FUSB300_OFFSET_EPSTRID(n)	(0x40 + (n - 1) * 0x30)
+#define FUSB300_OFFSET_HSPTM		0x300
+#define FUSB300_OFFSET_HSCR		0x304
+#define FUSB300_OFFSET_SSCR0		0x308
+#define FUSB300_OFFSET_SSCR1		0x30C
+#define FUSB300_OFFSET_TT		0x310
+#define FUSB300_OFFSET_DEVNOTF		0x314
+#define FUSB300_OFFSET_DNC1		0x318
+#define FUSB300_OFFSET_CS		0x31C
+#define FUSB300_OFFSET_SOF		0x324
+#define FUSB300_OFFSET_EFCS		0x328
+#define FUSB300_OFFSET_IGR0		0x400
+#define FUSB300_OFFSET_IGR1		0x404
+#define FUSB300_OFFSET_IGR2		0x408
+#define FUSB300_OFFSET_IGR3		0x40C
+#define FUSB300_OFFSET_IGR4		0x410
+#define FUSB300_OFFSET_IGR5		0x414
+#define FUSB300_OFFSET_IGER0		0x420
+#define FUSB300_OFFSET_IGER1		0x424
+#define FUSB300_OFFSET_IGER2		0x428
+#define FUSB300_OFFSET_IGER3		0x42C
+#define FUSB300_OFFSET_IGER4		0x430
+#define FUSB300_OFFSET_IGER5		0x434
+#define FUSB300_OFFSET_DMAHMER		0x500
+#define FUSB300_OFFSET_EPPRDRDY		0x504
+#define FUSB300_OFFSET_DMAEPMR		0x508
+#define FUSB300_OFFSET_DMAENR		0x50C
+#define FUSB300_OFFSET_DMAAPR		0x510
+#define FUSB300_OFFSET_AHBCR		0x514
+#define FUSB300_OFFSET_EPPRD_W0(n)	(0x520 + (n - 1) * 0x10)
+#define FUSB300_OFFSET_EPPRD_W1(n)	(0x524 + (n - 1) * 0x10)
+#define FUSB300_OFFSET_EPPRD_W2(n)	(0x528 + (n - 1) * 0x10)
+#define FUSB300_OFFSET_EPRD_PTR(n)	(0x52C + (n - 1) * 0x10)
+#define FUSB300_OFFSET_BUFDBG_START	0x800
+#define FUSB300_OFFSET_BUFDBG_END	0xBFC
+#define FUSB300_OFFSET_EPPORT(n)	(0x1010 + (n - 1) * 0x10)
+
+/*
+ * *	Global Control Register (offset = 000H)
+ * */
+#define FUSB300_GCR_SF_RST		(1 << 8)
+#define FUSB300_GCR_VBUS_STATUS		(1 << 7)
+#define FUSB300_GCR_FORCE_HS_SUSP	(1 << 6)
+#define FUSB300_GCR_SYNC_FIFO1_CLR	(1 << 5)
+#define FUSB300_GCR_SYNC_FIFO0_CLR	(1 << 4)
+#define FUSB300_GCR_FIFOCLR		(1 << 3)
+#define FUSB300_GCR_GLINTEN		(1 << 2)
+#define FUSB300_GCR_DEVEN_FS		0x3
+#define FUSB300_GCR_DEVEN_HS		0x2
+#define FUSB300_GCR_DEVEN_SS		0x1
+#define FUSB300_GCR_DEVDIS		0x0
+#define FUSB300_GCR_DEVEN_MSK		0x3
+
+
+/*
+ * *Global Test Mode (offset = 004H)
+ * */
+#define FUSB300_GTM_TST_DIS_SOFGEN	(1 << 16)
+#define FUSB300_GTM_TST_CUR_EP_ENTRY(n)	((n & 0xF) << 12)
+#define FUSB300_GTM_TST_EP_ENTRY(n)	((n & 0xF) << 8)
+#define FUSB300_GTM_TST_EP_NUM(n)	((n & 0xF) << 4)
+#define FUSB300_GTM_TST_FIFO_DEG	(1 << 1)
+#define FUSB300_GTM_TSTMODE		(1 << 0)
+
+/*
+ * * Device Address Register (offset = 008H)
+ * */
+#define FUSB300_DAR_SETCONFG	(1 << 7)
+#define FUSB300_DAR_DRVADDR(x)	(x & 0x7F)
+#define FUSB300_DAR_DRVADDR_MSK	0x7F
+
+/*
+ * *Control Transfer Configuration and Status Register
+ * (CX_Config_Status, offset = 00CH)
+ * */
+#define FUSB300_CSR_LEN(x)	((x & 0xFFFF) << 8)
+#define FUSB300_CSR_LEN_MSK	(0xFFFF << 8)
+#define FUSB300_CSR_EMP		(1 << 4)
+#define FUSB300_CSR_FUL		(1 << 3)
+#define FUSB300_CSR_CLR		(1 << 2)
+#define FUSB300_CSR_STL		(1 << 1)
+#define FUSB300_CSR_DONE	(1 << 0)
+
+/*
+ * * EPn Setting 0 (EPn_SET0, offset = 020H+(n-1)*30H, n=1~15 )
+ * */
+#define FUSB300_EPSET0_STL_CLR		(1 << 3)
+#define FUSB300_EPSET0_CLRSEQNUM	(1 << 2)
+#define FUSB300_EPSET0_STL		(1 << 0)
+
+/*
+ * * EPn Setting 1 (EPn_SET1, offset = 024H+(n-1)*30H, n=1~15)
+ * */
+#define FUSB300_EPSET1_START_ENTRY(x)	((x & 0xFF) << 24)
+#define FUSB300_EPSET1_START_ENTRY_MSK	(0xFF << 24)
+#define FUSB300_EPSET1_FIFOENTRY(x)	((x & 0x1F) << 12)
+#define FUSB300_EPSET1_FIFOENTRY_MSK	(0x1f << 12)
+#define FUSB300_EPSET1_INTERVAL(x)	((x & 0x7) << 6)
+#define FUSB300_EPSET1_BWNUM(x)		((x & 0x3) << 4)
+#define FUSB300_EPSET1_TYPEISO		(1 << 2)
+#define FUSB300_EPSET1_TYPEBLK		(2 << 2)
+#define FUSB300_EPSET1_TYPEINT		(3 << 2)
+#define FUSB300_EPSET1_TYPE(x)		((x & 0x3) << 2)
+#define FUSB300_EPSET1_TYPE_MSK		(0x3 << 2)
+#define FUSB300_EPSET1_DIROUT		(0 << 1)
+#define FUSB300_EPSET1_DIRIN		(1 << 1)
+#define FUSB300_EPSET1_DIR(x)		((x & 0x1) << 1)
+#define FUSB300_EPSET1_DIRIN		(1 << 1)
+#define FUSB300_EPSET1_DIR_MSK		((0x1) << 1)
+#define FUSB300_EPSET1_ACTDIS		0
+#define FUSB300_EPSET1_ACTEN		1
+
+/*
+ * *EPn Setting 2 (EPn_SET2, offset = 028H+(n-1)*30H, n=1~15)
+ * */
+#define FUSB300_EPSET2_ADDROFS(x)	((x & 0x7FFF) << 16)
+#define FUSB300_EPSET2_ADDROFS_MSK	(0x7fff << 16)
+#define FUSB300_EPSET2_MPS(x)		(x & 0x7FF)
+#define FUSB300_EPSET2_MPS_MSK		0x7FF
+
+/*
+ * * EPn FIFO Register (offset = 2cH+(n-1)*30H)
+ * */
+#define FUSB300_FFR_RST		(1 << 31)
+#define FUSB300_FF_FUL		(1 << 30)
+#define FUSB300_FF_EMPTY	(1 << 29)
+#define FUSB300_FFR_BYCNT	0x1FFFF
+
+/*
+ * *EPn Stream ID (EPn_STR_ID, offset = 040H+(n-1)*30H, n=1~15)
+ * */
+#define FUSB300_STRID_STREN	(1 << 16)
+#define FUSB300_STRID_STRID(x)	(x & 0xFFFF)
+
+/*
+ * *HS PHY Test Mode (offset = 300H)
+ * */
+#define FUSB300_HSPTM_TSTPKDONE		(1 << 4)
+#define FUSB300_HSPTM_TSTPKT		(1 << 3)
+#define FUSB300_HSPTM_TSTSET0NAK	(1 << 2)
+#define FUSB300_HSPTM_TSTKSTA		(1 << 1)
+#define FUSB300_HSPTM_TSTJSTA		(1 << 0)
+
+/*
+ * *HS Control Register (offset = 304H)
+ * */
+#define FUSB300_HSCR_HS_LPM_PERMIT	(1 << 8)
+#define FUSB300_HSCR_HS_LPM_RMWKUP	(1 << 7)
+#define FUSB300_HSCR_CAP_LPM_RMWKUP	(1 << 6)
+#define FUSB300_HSCR_HS_GOSUSP		(1 << 5)
+#define FUSB300_HSCR_HS_GORMWKU		(1 << 4)
+#define FUSB300_HSCR_CAP_RMWKUP		(1 << 3)
+#define FUSB300_HSCR_IDLECNT_0MS	0
+#define FUSB300_HSCR_IDLECNT_1MS	1
+#define FUSB300_HSCR_IDLECNT_2MS	2
+#define FUSB300_HSCR_IDLECNT_3MS	3
+#define FUSB300_HSCR_IDLECNT_4MS	4
+#define FUSB300_HSCR_IDLECNT_5MS	5
+#define FUSB300_HSCR_IDLECNT_6MS	6
+#define FUSB300_HSCR_IDLECNT_7MS	7
+
+/*
+ * * SS Controller Register 0 (offset = 308H)
+ * */
+#define FUSB300_SSCR0_MAX_INTERVAL(x)	((x & 0x7) << 4)
+#define FUSB300_SSCR0_U2_FUN_EN		(1 << 1)
+#define FUSB300_SSCR0_U1_FUN_EN		(1 << 0)
+
+/*
+ * * SS Controller Register 1 (offset = 30CH)
+ * */
+#define FUSB300_SSCR1_GO_U3_DONE	(1 << 8)
+#define FUSB300_SSCR1_TXDEEMPH_LEVEL	(1 << 7)
+#define FUSB300_SSCR1_DIS_SCRMB		(1 << 6)
+#define FUSB300_SSCR1_FORCE_RECOVERY	(1 << 5)
+#define FUSB300_SSCR1_U3_WAKEUP_EN	(1 << 4)
+#define FUSB300_SSCR1_U2_EXIT_EN	(1 << 3)
+#define FUSB300_SSCR1_U1_EXIT_EN	(1 << 2)
+#define FUSB300_SSCR1_U2_ENTRY_EN	(1 << 1)
+#define FUSB300_SSCR1_U1_ENTRY_EN	(1 << 0)
+
+/*
+ * *SS Controller Register 2  (offset = 310H)
+ * */
+#define FUSB300_SSCR2_SS_TX_SWING		(1 << 25)
+#define FUSB300_SSCR2_FORCE_LINKPM_ACCEPT	(1 << 24)
+#define FUSB300_SSCR2_U2_INACT_TIMEOUT(x)	((x & 0xFF) << 16)
+#define FUSB300_SSCR2_U1TIMEOUT(x)		((x & 0xFF) << 8)
+#define FUSB300_SSCR2_U2TIMEOUT(x)		(x & 0xFF)
+
+/*
+ * *SS Device Notification Control (DEV_NOTF, offset = 314H)
+ * */
+#define FUSB300_DEVNOTF_CONTEXT0(x)		((x & 0xFFFFFF) << 8)
+#define FUSB300_DEVNOTF_TYPE_DIS		0
+#define FUSB300_DEVNOTF_TYPE_FUNCWAKE		1
+#define FUSB300_DEVNOTF_TYPE_LTM		2
+#define FUSB300_DEVNOTF_TYPE_BUSINT_ADJMSG	3
+
+/*
+ * *BFM Arbiter Priority Register (BFM_ARB offset = 31CH)
+ * */
+#define FUSB300_BFMARB_ARB_M1	(1 << 3)
+#define FUSB300_BFMARB_ARB_M0	(1 << 2)
+#define FUSB300_BFMARB_ARB_S1	(1 << 1)
+#define FUSB300_BFMARB_ARB_S0	1
+
+/*
+ * *Vendor Specific IO Control Register (offset = 320H)
+ * */
+#define FUSB300_VSIC_VCTLOAD_N	(1 << 8)
+#define FUSB300_VSIC_VCTL(x)	(x & 0x3F)
+
+/*
+ * *SOF Mask Timer (offset = 324H)
+ * */
+#define FUSB300_SOF_MASK_TIMER_HS	0x044c
+#define FUSB300_SOF_MASK_TIMER_FS	0x2710
+
+/*
+ * *Error Flag and Control Status (offset = 328H)
+ * */
+#define FUSB300_EFCS_PM_STATE_U3	3
+#define FUSB300_EFCS_PM_STATE_U2	2
+#define FUSB300_EFCS_PM_STATE_U1	1
+#define FUSB300_EFCS_PM_STATE_U0	0
+
+/*
+ * *Interrupt Group 0 Register (offset = 400H)
+ * */
+#define FUSB300_IGR0_EP15_PRD_INT	(1 << 31)
+#define FUSB300_IGR0_EP14_PRD_INT	(1 << 30)
+#define FUSB300_IGR0_EP13_PRD_INT	(1 << 29)
+#define FUSB300_IGR0_EP12_PRD_INT	(1 << 28)
+#define FUSB300_IGR0_EP11_PRD_INT	(1 << 27)
+#define FUSB300_IGR0_EP10_PRD_INT	(1 << 26)
+#define FUSB300_IGR0_EP9_PRD_INT	(1 << 25)
+#define FUSB300_IGR0_EP8_PRD_INT	(1 << 24)
+#define FUSB300_IGR0_EP7_PRD_INT	(1 << 23)
+#define FUSB300_IGR0_EP6_PRD_INT	(1 << 22)
+#define FUSB300_IGR0_EP5_PRD_INT	(1 << 21)
+#define FUSB300_IGR0_EP4_PRD_INT	(1 << 20)
+#define FUSB300_IGR0_EP3_PRD_INT	(1 << 19)
+#define FUSB300_IGR0_EP2_PRD_INT	(1 << 18)
+#define FUSB300_IGR0_EP1_PRD_INT	(1 << 17)
+#define FUSB300_IGR0_EPn_PRD_INT(n)	(1 << (n + 16))
+
+#define FUSB300_IGR0_EP15_FIFO_INT	(1 << 15)
+#define FUSB300_IGR0_EP14_FIFO_INT	(1 << 14)
+#define FUSB300_IGR0_EP13_FIFO_INT	(1 << 13)
+#define FUSB300_IGR0_EP12_FIFO_INT	(1 << 12)
+#define FUSB300_IGR0_EP11_FIFO_INT	(1 << 11)
+#define FUSB300_IGR0_EP10_FIFO_INT	(1 << 10)
+#define FUSB300_IGR0_EP9_FIFO_INT	(1 << 9)
+#define FUSB300_IGR0_EP8_FIFO_INT	(1 << 8)
+#define FUSB300_IGR0_EP7_FIFO_INT	(1 << 7)
+#define FUSB300_IGR0_EP6_FIFO_INT	(1 << 6)
+#define FUSB300_IGR0_EP5_FIFO_INT	(1 << 5)
+#define FUSB300_IGR0_EP4_FIFO_INT	(1 << 4)
+#define FUSB300_IGR0_EP3_FIFO_INT	(1 << 3)
+#define FUSB300_IGR0_EP2_FIFO_INT	(1 << 2)
+#define FUSB300_IGR0_EP1_FIFO_INT	(1 << 1)
+#define FUSB300_IGR0_EPn_FIFO_INT(n)	(1 << n)
+
+/*
+ * *Interrupt Group 1 Register (offset = 404H)
+ * */
+#define FUSB300_IGR1_INTGRP5		(1 << 31)
+#define FUSB300_IGR1_VBUS_CHG_INT	(1 << 30)
+#define FUSB300_IGR1_SYNF1_EMPTY_INT	(1 << 29)
+#define FUSB300_IGR1_SYNF0_EMPTY_INT	(1 << 28)
+#define FUSB300_IGR1_U3_EXIT_FAIL_INT	(1 << 27)
+#define FUSB300_IGR1_U2_EXIT_FAIL_INT	(1 << 26)
+#define FUSB300_IGR1_U1_EXIT_FAIL_INT	(1 << 25)
+#define FUSB300_IGR1_U2_ENTRY_FAIL_INT	(1 << 24)
+#define FUSB300_IGR1_U1_ENTRY_FAIL_INT	(1 << 23)
+#define FUSB300_IGR1_U3_EXIT_INT	(1 << 22)
+#define FUSB300_IGR1_U2_EXIT_INT	(1 << 21)
+#define FUSB300_IGR1_U1_EXIT_INT	(1 << 20)
+#define FUSB300_IGR1_U3_ENTRY_INT	(1 << 19)
+#define FUSB300_IGR1_U2_ENTRY_INT	(1 << 18)
+#define FUSB300_IGR1_U1_ENTRY_INT	(1 << 17)
+#define FUSB300_IGR1_HOT_RST_INT	(1 << 16)
+#define FUSB300_IGR1_WARM_RST_INT	(1 << 15)
+#define FUSB300_IGR1_RESM_INT		(1 << 14)
+#define FUSB300_IGR1_SUSP_INT		(1 << 13)
+#define FUSB300_IGR1_HS_LPM_INT		(1 << 12)
+#define FUSB300_IGR1_USBRST_INT		(1 << 11)
+#define FUSB300_IGR1_DEV_MODE_CHG_INT	(1 << 9)
+#define FUSB300_IGR1_CX_COMABT_INT	(1 << 8)
+#define FUSB300_IGR1_CX_COMFAIL_INT	(1 << 7)
+#define FUSB300_IGR1_CX_CMDEND_INT	(1 << 6)
+#define FUSB300_IGR1_CX_OUT_INT		(1 << 5)
+#define FUSB300_IGR1_CX_IN_INT		(1 << 4)
+#define FUSB300_IGR1_CX_SETUP_INT	(1 << 3)
+#define FUSB300_IGR1_INTGRP4		(1 << 2)
+#define FUSB300_IGR1_INTGRP3		(1 << 1)
+#define FUSB300_IGR1_INTGRP2		(1 << 0)
+
+/*
+ * *Interrupt Group 2 Register (offset = 408H)
+ * */
+#define FUSB300_IGR2_EP6_STR_ACCEPT_INT		(1 << 29)
+#define FUSB300_IGR2_EP6_STR_RESUME_INT		(1 << 28)
+#define FUSB300_IGR2_EP6_STR_REQ_INT		(1 << 27)
+#define FUSB300_IGR2_EP6_STR_NOTRDY_INT		(1 << 26)
+#define FUSB300_IGR2_EP6_STR_PRIME_INT		(1 << 25)
+#define FUSB300_IGR2_EP5_STR_ACCEPT_INT		(1 << 24)
+#define FUSB300_IGR2_EP5_STR_RESUME_INT		(1 << 23)
+#define FUSB300_IGR2_EP5_STR_REQ_INT		(1 << 22)
+#define FUSB300_IGR2_EP5_STR_NOTRDY_INT		(1 << 21)
+#define FUSB300_IGR2_EP5_STR_PRIME_INT		(1 << 20)
+#define FUSB300_IGR2_EP4_STR_ACCEPT_INT		(1 << 19)
+#define FUSB300_IGR2_EP4_STR_RESUME_INT		(1 << 18)
+#define FUSB300_IGR2_EP4_STR_REQ_INT		(1 << 17)
+#define FUSB300_IGR2_EP4_STR_NOTRDY_INT		(1 << 16)
+#define FUSB300_IGR2_EP4_STR_PRIME_INT		(1 << 15)
+#define FUSB300_IGR2_EP3_STR_ACCEPT_INT		(1 << 14)
+#define FUSB300_IGR2_EP3_STR_RESUME_INT		(1 << 13)
+#define FUSB300_IGR2_EP3_STR_REQ_INT		(1 << 12)
+#define FUSB300_IGR2_EP3_STR_NOTRDY_INT		(1 << 11)
+#define FUSB300_IGR2_EP3_STR_PRIME_INT		(1 << 10)
+#define FUSB300_IGR2_EP2_STR_ACCEPT_INT		(1 << 9)
+#define FUSB300_IGR2_EP2_STR_RESUME_INT		(1 << 8)
+#define FUSB300_IGR2_EP2_STR_REQ_INT		(1 << 7)
+#define FUSB300_IGR2_EP2_STR_NOTRDY_INT		(1 << 6)
+#define FUSB300_IGR2_EP2_STR_PRIME_INT		(1 << 5)
+#define FUSB300_IGR2_EP1_STR_ACCEPT_INT		(1 << 4)
+#define FUSB300_IGR2_EP1_STR_RESUME_INT		(1 << 3)
+#define FUSB300_IGR2_EP1_STR_REQ_INT		(1 << 2)
+#define FUSB300_IGR2_EP1_STR_NOTRDY_INT		(1 << 1)
+#define FUSB300_IGR2_EP1_STR_PRIME_INT		(1 << 0)
+
+#define FUSB300_IGR2_EP_STR_ACCEPT_INT(n)	(1 << (5 * n - 1))
+#define FUSB300_IGR2_EP_STR_RESUME_INT(n)	(1 << (5 * n - 2))
+#define FUSB300_IGR2_EP_STR_REQ_INT(n)		(1 << (5 * n - 3))
+#define FUSB300_IGR2_EP_STR_NOTRDY_INT(n)	(1 << (5 * n - 4))
+#define FUSB300_IGR2_EP_STR_PRIME_INT(n)	(1 << (5 * n - 5))
+
+/*
+ * *Interrupt Group 3 Register (offset = 40CH)
+ * */
+#define FUSB300_IGR3_EP12_STR_ACCEPT_INT	(1 << 29)
+#define FUSB300_IGR3_EP12_STR_RESUME_INT	(1 << 28)
+#define FUSB300_IGR3_EP12_STR_REQ_INT		(1 << 27)
+#define FUSB300_IGR3_EP12_STR_NOTRDY_INT	(1 << 26)
+#define FUSB300_IGR3_EP12_STR_PRIME_INT		(1 << 25)
+#define FUSB300_IGR3_EP11_STR_ACCEPT_INT	(1 << 24)
+#define FUSB300_IGR3_EP11_STR_RESUME_INT	(1 << 23)
+#define FUSB300_IGR3_EP11_STR_REQ_INT		(1 << 22)
+#define FUSB300_IGR3_EP11_STR_NOTRDY_INT	(1 << 21)
+#define FUSB300_IGR3_EP11_STR_PRIME_INT		(1 << 20)
+#define FUSB300_IGR3_EP10_STR_ACCEPT_INT	(1 << 19)
+#define FUSB300_IGR3_EP10_STR_RESUME_INT	(1 << 18)
+#define FUSB300_IGR3_EP10_STR_REQ_INT		(1 << 17)
+#define FUSB300_IGR3_EP10_STR_NOTRDY_INT	(1 << 16)
+#define FUSB300_IGR3_EP10_STR_PRIME_INT		(1 << 15)
+#define FUSB300_IGR3_EP9_STR_ACCEPT_INT		(1 << 14)
+#define FUSB300_IGR3_EP9_STR_RESUME_INT		(1 << 13)
+#define FUSB300_IGR3_EP9_STR_REQ_INT		(1 << 12)
+#define FUSB300_IGR3_EP9_STR_NOTRDY_INT		(1 << 11)
+#define FUSB300_IGR3_EP9_STR_PRIME_INT		(1 << 10)
+#define FUSB300_IGR3_EP8_STR_ACCEPT_INT		(1 << 9)
+#define FUSB300_IGR3_EP8_STR_RESUME_INT		(1 << 8)
+#define FUSB300_IGR3_EP8_STR_REQ_INT		(1 << 7)
+#define FUSB300_IGR3_EP8_STR_NOTRDY_INT		(1 << 6)
+#define FUSB300_IGR3_EP8_STR_PRIME_INT		(1 << 5)
+#define FUSB300_IGR3_EP7_STR_ACCEPT_INT		(1 << 4)
+#define FUSB300_IGR3_EP7_STR_RESUME_INT		(1 << 3)
+#define FUSB300_IGR3_EP7_STR_REQ_INT		(1 << 2)
+#define FUSB300_IGR3_EP7_STR_NOTRDY_INT		(1 << 1)
+#define FUSB300_IGR3_EP7_STR_PRIME_INT		(1 << 0)
+
+#define FUSB300_IGR3_EP_STR_ACCEPT_INT(n)	(1 << (5 * (n - 6) - 1))
+#define FUSB300_IGR3_EP_STR_RESUME_INT(n)	(1 << (5 * (n - 6) - 2))
+#define FUSB300_IGR3_EP_STR_REQ_INT(n)		(1 << (5 * (n - 6) - 3))
+#define FUSB300_IGR3_EP_STR_NOTRDY_INT(n)	(1 << (5 * (n - 6) - 4))
+#define FUSB300_IGR3_EP_STR_PRIME_INT(n)	(1 << (5 * (n - 6) - 5))
+
+/*
+ * *Interrupt Group 4 Register (offset = 410H)
+ * */
+#define FUSB300_IGR4_EP15_RX0_INT		(1 << 31)
+#define FUSB300_IGR4_EP14_RX0_INT		(1 << 30)
+#define FUSB300_IGR4_EP13_RX0_INT		(1 << 29)
+#define FUSB300_IGR4_EP12_RX0_INT		(1 << 28)
+#define FUSB300_IGR4_EP11_RX0_INT		(1 << 27)
+#define FUSB300_IGR4_EP10_RX0_INT		(1 << 26)
+#define FUSB300_IGR4_EP9_RX0_INT		(1 << 25)
+#define FUSB300_IGR4_EP8_RX0_INT		(1 << 24)
+#define FUSB300_IGR4_EP7_RX0_INT		(1 << 23)
+#define FUSB300_IGR4_EP6_RX0_INT		(1 << 22)
+#define FUSB300_IGR4_EP5_RX0_INT		(1 << 21)
+#define FUSB300_IGR4_EP4_RX0_INT		(1 << 20)
+#define FUSB300_IGR4_EP3_RX0_INT		(1 << 19)
+#define FUSB300_IGR4_EP2_RX0_INT		(1 << 18)
+#define FUSB300_IGR4_EP1_RX0_INT		(1 << 17)
+#define FUSB300_IGR4_EP_RX0_INT(x)		(1 << (x + 16))
+#define FUSB300_IGR4_EP15_STR_ACCEPT_INT	(1 << 14)
+#define FUSB300_IGR4_EP15_STR_RESUME_INT	(1 << 13)
+#define FUSB300_IGR4_EP15_STR_REQ_INT		(1 << 12)
+#define FUSB300_IGR4_EP15_STR_NOTRDY_INT	(1 << 11)
+#define FUSB300_IGR4_EP15_STR_PRIME_INT		(1 << 10)
+#define FUSB300_IGR4_EP14_STR_ACCEPT_INT	(1 << 9)
+#define FUSB300_IGR4_EP14_STR_RESUME_INT	(1 << 8)
+#define FUSB300_IGR4_EP14_STR_REQ_INT		(1 << 7)
+#define FUSB300_IGR4_EP14_STR_NOTRDY_INT	(1 << 6)
+#define FUSB300_IGR4_EP14_STR_PRIME_INT		(1 << 5)
+#define FUSB300_IGR4_EP13_STR_ACCEPT_INT	(1 << 4)
+#define FUSB300_IGR4_EP13_STR_RESUME_INT	(1 << 3)
+#define FUSB300_IGR4_EP13_STR_REQ_INT		(1 << 2)
+#define FUSB300_IGR4_EP13_STR_NOTRDY_INT	(1 << 1)
+#define FUSB300_IGR4_EP13_STR_PRIME_INT		(1 << 0)
+
+#define FUSB300_IGR4_EP_STR_ACCEPT_INT(n)	(1 << (5 * (n - 12) - 1))
+#define FUSB300_IGR4_EP_STR_RESUME_INT(n)	(1 << (5 * (n - 12) - 2))
+#define FUSB300_IGR4_EP_STR_REQ_INT(n)		(1 << (5 * (n - 12) - 3))
+#define FUSB300_IGR4_EP_STR_NOTRDY_INT(n)	(1 << (5 * (n - 12) - 4))
+#define FUSB300_IGR4_EP_STR_PRIME_INT(n)	(1 << (5 * (n - 12) - 5))
+
+/*
+ * *Interrupt Group 5 Register (offset = 414H)
+ * */
+#define FUSB300_IGR5_EP_STL_INT(n)	(1 << n)
+
+/*
+ * *Interrupt Enable Group 0 Register (offset = 420H)
+ * */
+#define FUSB300_IGER0_EEP15_PRD_INT	(1 << 31)
+#define FUSB300_IGER0_EEP14_PRD_INT	(1 << 30)
+#define FUSB300_IGER0_EEP13_PRD_INT	(1 << 29)
+#define FUSB300_IGER0_EEP12_PRD_INT	(1 << 28)
+#define FUSB300_IGER0_EEP11_PRD_INT	(1 << 27)
+#define FUSB300_IGER0_EEP10_PRD_INT	(1 << 26)
+#define FUSB300_IGER0_EEP9_PRD_INT	(1 << 25)
+#define FUSB300_IGER0_EP8_PRD_INT	(1 << 24)
+#define FUSB300_IGER0_EEP7_PRD_INT	(1 << 23)
+#define FUSB300_IGER0_EEP6_PRD_INT	(1 << 22)
+#define FUSB300_IGER0_EEP5_PRD_INT	(1 << 21)
+#define FUSB300_IGER0_EEP4_PRD_INT	(1 << 20)
+#define FUSB300_IGER0_EEP3_PRD_INT	(1 << 19)
+#define FUSB300_IGER0_EEP2_PRD_INT	(1 << 18)
+#define FUSB300_IGER0_EEP1_PRD_INT	(1 << 17)
+#define FUSB300_IGER0_EEPn_PRD_INT(n)	(1 << (n + 16))
+
+#define FUSB300_IGER0_EEP15_FIFO_INT	(1 << 15)
+#define FUSB300_IGER0_EEP14_FIFO_INT	(1 << 14)
+#define FUSB300_IGER0_EEP13_FIFO_INT	(1 << 13)
+#define FUSB300_IGER0_EEP12_FIFO_INT	(1 << 12)
+#define FUSB300_IGER0_EEP11_FIFO_INT	(1 << 11)
+#define FUSB300_IGER0_EEP10_FIFO_INT	(1 << 10)
+#define FUSB300_IGER0_EEP9_FIFO_INT	(1 << 9)
+#define FUSB300_IGER0_EEP8_FIFO_INT	(1 << 8)
+#define FUSB300_IGER0_EEP7_FIFO_INT	(1 << 7)
+#define FUSB300_IGER0_EEP6_FIFO_INT	(1 << 6)
+#define FUSB300_IGER0_EEP5_FIFO_INT	(1 << 5)
+#define FUSB300_IGER0_EEP4_FIFO_INT	(1 << 4)
+#define FUSB300_IGER0_EEP3_FIFO_INT	(1 << 3)
+#define FUSB300_IGER0_EEP2_FIFO_INT	(1 << 2)
+#define FUSB300_IGER0_EEP1_FIFO_INT	(1 << 1)
+#define FUSB300_IGER0_EEPn_FIFO_INT(n)	(1 << n)
+
+/*
+ * *Interrupt Enable Group 1 Register (offset = 424H)
+ * */
+#define FUSB300_IGER1_EINT_GRP5		(1 << 31)
+#define FUSB300_IGER1_VBUS_CHG_INT	(1 << 30)
+#define FUSB300_IGER1_SYNF1_EMPTY_INT	(1 << 29)
+#define FUSB300_IGER1_SYNF0_EMPTY_INT	(1 << 28)
+#define FUSB300_IGER1_U3_EXIT_FAIL_INT	(1 << 27)
+#define FUSB300_IGER1_U2_EXIT_FAIL_INT	(1 << 26)
+#define FUSB300_IGER1_U1_EXIT_FAIL_INT	(1 << 25)
+#define FUSB300_IGER1_U2_ENTRY_FAIL_INT	(1 << 24)
+#define FUSB300_IGER1_U1_ENTRY_FAIL_INT	(1 << 23)
+#define FUSB300_IGER1_U3_EXIT_INT	(1 << 22)
+#define FUSB300_IGER1_U2_EXIT_INT	(1 << 21)
+#define FUSB300_IGER1_U1_EXIT_INT	(1 << 20)
+#define FUSB300_IGER1_U3_ENTRY_INT	(1 << 19)
+#define FUSB300_IGER1_U2_ENTRY_INT	(1 << 18)
+#define FUSB300_IGER1_U1_ENTRY_INT	(1 << 17)
+#define FUSB300_IGER1_HOT_RST_INT	(1 << 16)
+#define FUSB300_IGER1_WARM_RST_INT	(1 << 15)
+#define FUSB300_IGER1_RESM_INT		(1 << 14)
+#define FUSB300_IGER1_SUSP_INT		(1 << 13)
+#define FUSB300_IGER1_LPM_INT		(1 << 12)
+#define FUSB300_IGER1_HS_RST_INT	(1 << 11)
+#define FUSB300_IGER1_EDEV_MODE_CHG_INT	(1 << 9)
+#define FUSB300_IGER1_CX_COMABT_INT	(1 << 8)
+#define FUSB300_IGER1_CX_COMFAIL_INT	(1 << 7)
+#define FUSB300_IGER1_CX_CMDEND_INT	(1 << 6)
+#define FUSB300_IGER1_CX_OUT_INT	(1 << 5)
+#define FUSB300_IGER1_CX_IN_INT		(1 << 4)
+#define FUSB300_IGER1_CX_SETUP_INT	(1 << 3)
+#define FUSB300_IGER1_INTGRP4		(1 << 2)
+#define FUSB300_IGER1_INTGRP3		(1 << 1)
+#define FUSB300_IGER1_INTGRP2		(1 << 0)
+
+/*
+ * *Interrupt Enable Group 2 Register (offset = 428H)
+ * */
+#define FUSB300_IGER2_EEP_STR_ACCEPT_INT(n)	(1 << (5 * n - 1))
+#define FUSB300_IGER2_EEP_STR_RESUME_INT(n)	(1 << (5 * n - 2))
+#define FUSB300_IGER2_EEP_STR_REQ_INT(n)	(1 << (5 * n - 3))
+#define FUSB300_IGER2_EEP_STR_NOTRDY_INT(n)	(1 << (5 * n - 4))
+#define FUSB300_IGER2_EEP_STR_PRIME_INT(n)	(1 << (5 * n - 5))
+
+/*
+ * *Interrupt Enable Group 3 Register (offset = 42CH)
+ * */
+
+#define FUSB300_IGER3_EEP_STR_ACCEPT_INT(n)	(1 << (5 * (n - 6) - 1))
+#define FUSB300_IGER3_EEP_STR_RESUME_INT(n)	(1 << (5 * (n - 6) - 2))
+#define FUSB300_IGER3_EEP_STR_REQ_INT(n)	(1 << (5 * (n - 6) - 3))
+#define FUSB300_IGER3_EEP_STR_NOTRDY_INT(n)	(1 << (5 * (n - 6) - 4))
+#define FUSB300_IGER3_EEP_STR_PRIME_INT(n)	(1 << (5 * (n - 6) - 5))
+
+/*
+ * *Interrupt Enable Group 4 Register (offset = 430H)
+ * */
+
+#define FUSB300_IGER4_EEP_RX0_INT(n)		(1 << (n + 16))
+#define FUSB300_IGER4_EEP_STR_ACCEPT_INT(n)	(1 << (5 * (n - 6) - 1))
+#define FUSB300_IGER4_EEP_STR_RESUME_INT(n)	(1 << (5 * (n - 6) - 2))
+#define FUSB300_IGER4_EEP_STR_REQ_INT(n)	(1 << (5 * (n - 6) - 3))
+#define FUSB300_IGER4_EEP_STR_NOTRDY_INT(n)	(1 << (5 * (n - 6) - 4))
+#define FUSB300_IGER4_EEP_STR_PRIME_INT(n)	(1 << (5 * (n - 6) - 5))
+
+/* EP PRD Ready (EP_PRD_RDY, offset = 504H) */
+
+#define FUSB300_EPPRDR_EP15_PRD_RDY		(1 << 15)
+#define FUSB300_EPPRDR_EP14_PRD_RDY		(1 << 14)
+#define FUSB300_EPPRDR_EP13_PRD_RDY		(1 << 13)
+#define FUSB300_EPPRDR_EP12_PRD_RDY		(1 << 12)
+#define FUSB300_EPPRDR_EP11_PRD_RDY		(1 << 11)
+#define FUSB300_EPPRDR_EP10_PRD_RDY		(1 << 10)
+#define FUSB300_EPPRDR_EP9_PRD_RDY		(1 << 9)
+#define FUSB300_EPPRDR_EP8_PRD_RDY		(1 << 8)
+#define FUSB300_EPPRDR_EP7_PRD_RDY		(1 << 7)
+#define FUSB300_EPPRDR_EP6_PRD_RDY		(1 << 6)
+#define FUSB300_EPPRDR_EP5_PRD_RDY		(1 << 5)
+#define FUSB300_EPPRDR_EP4_PRD_RDY		(1 << 4)
+#define FUSB300_EPPRDR_EP3_PRD_RDY		(1 << 3)
+#define FUSB300_EPPRDR_EP2_PRD_RDY		(1 << 2)
+#define FUSB300_EPPRDR_EP1_PRD_RDY		(1 << 1)
+#define FUSB300_EPPRDR_EP_PRD_RDY(n)		(1 << n)
+
+/* AHB Bus Control Register (offset = 514H) */
+#define FUSB300_AHBBCR_S1_SPLIT_ON		(1 << 17)
+#define FUSB300_AHBBCR_S0_SPLIT_ON		(1 << 16)
+#define FUSB300_AHBBCR_S1_1entry		(0 << 12)
+#define FUSB300_AHBBCR_S1_4entry		(3 << 12)
+#define FUSB300_AHBBCR_S1_8entry		(5 << 12)
+#define FUSB300_AHBBCR_S1_16entry		(7 << 12)
+#define FUSB300_AHBBCR_S0_1entry		(0 << 8)
+#define FUSB300_AHBBCR_S0_4entry		(3 << 8)
+#define FUSB300_AHBBCR_S0_8entry		(5 << 8)
+#define FUSB300_AHBBCR_S0_16entry		(7 << 8)
+#define FUSB300_AHBBCR_M1_BURST_SINGLE		(0 << 4)
+#define FUSB300_AHBBCR_M1_BURST_INCR		(1 << 4)
+#define FUSB300_AHBBCR_M1_BURST_INCR4		(3 << 4)
+#define FUSB300_AHBBCR_M1_BURST_INCR8		(5 << 4)
+#define FUSB300_AHBBCR_M1_BURST_INCR16		(7 << 4)
+#define FUSB300_AHBBCR_M0_BURST_SINGLE		0
+#define FUSB300_AHBBCR_M0_BURST_INCR		1
+#define FUSB300_AHBBCR_M0_BURST_INCR4		3
+#define FUSB300_AHBBCR_M0_BURST_INCR8		5
+#define FUSB300_AHBBCR_M0_BURST_INCR16		7
+#define FUSB300_IGER5_EEP_STL_INT(n)		(1 << n)
+
+/* WORD 0 Data Structure of PRD Table */
+#define FUSB300_EPPRD0_M			(1 << 30)
+#define FUSB300_EPPRD0_O			(1 << 29)
+/* The finished prd */
+#define FUSB300_EPPRD0_F			(1 << 28)
+#define FUSB300_EPPRD0_I			(1 << 27)
+#define FUSB300_EPPRD0_A			(1 << 26)
+/* To decide HW point to first prd at next time */
+#define FUSB300_EPPRD0_L			(1 << 25)
+#define FUSB300_EPPRD0_H			(1 << 24)
+#define FUSB300_EPPRD0_BTC(n)			(n & 0xFFFFFF)
+
+/*----------------------------------------------------------------------*/
+#define FUSB300_MAX_NUM_EP		16
+
+#define FUSB300_FIFO_ENTRY_NUM		8
+#define FUSB300_MAX_FIFO_ENTRY		8
+
+#define SS_CTL_MAX_PACKET_SIZE		0x200
+#define SS_BULK_MAX_PACKET_SIZE		0x400
+#define SS_INT_MAX_PACKET_SIZE		0x400
+#define SS_ISO_MAX_PACKET_SIZE		0x400
+
+#define HS_BULK_MAX_PACKET_SIZE		0x200
+#define HS_CTL_MAX_PACKET_SIZE		0x40
+#define HS_INT_MAX_PACKET_SIZE		0x400
+#define HS_ISO_MAX_PACKET_SIZE		0x400
+
+struct fusb300_ep_info {
+	u8	epnum;
+	u8	type;
+	u8	interval;
+	u8	dir_in;
+	u16	maxpacket;
+	u16	addrofs;
+	u16	bw_num;
+};
+
+struct fusb300_request {
+
+	struct usb_request	req;
+	struct list_head	queue;
+};
+
+
+struct fusb300_ep {
+	struct usb_ep		ep;
+	struct fusb300		*fusb300;
+
+	struct list_head	queue;
+	unsigned		stall:1;
+	unsigned		wedged:1;
+	unsigned		use_dma:1;
+
+	unsigned char		epnum;
+	unsigned char		type;
+};
+
+struct fusb300 {
+	spinlock_t		lock;
+	void __iomem		*reg;
+
+	unsigned long		irq_trigger;
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+
+	struct fusb300_ep	*ep[FUSB300_MAX_NUM_EP];
+
+	struct usb_request	*ep0_req;	/* for internal request */
+	__le16			ep0_data;
+	u32			ep0_length;	/* for internal request */
+	u8			ep0_dir;	/* 0/0x80  out/in */
+
+	u8			fifo_entry_num;	/* next start fifo entry */
+	u32			addrofs;	/* next fifo address offset */
+	u8			reenum;		/* if re-enumeration */
+};
+
+#define to_fusb300(g)		(container_of((g), struct fusb300, gadget))
+
+#endif
diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
new file mode 100644
index 000000000..5ffb3d5c6
--- /dev/null
+++ b/drivers/usb/gadget/udc/goku_udc.c
@@ -0,0 +1,1860 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Toshiba TC86C001 ("Goku-S") USB Device Controller driver
+ *
+ * Copyright (C) 2000-2002 Lineo
+ *      by Stuart Lynne, Tom Rushworth, and Bruce Balden
+ * Copyright (C) 2002 Toshiba Corporation
+ * Copyright (C) 2003 MontaVista Software (source@mvista.com)
+ */
+
+/*
+ * This device has ep0 and three semi-configurable bulk/interrupt endpoints.
+ *
+ *  - Endpoint numbering is fixed: ep{1,2,3}-bulk
+ *  - Gadget drivers can choose ep maxpacket (8/16/32/64)
+ *  - Gadget drivers can choose direction (IN, OUT)
+ *  - DMA works with ep1 (OUT transfers) and ep2 (IN transfers).
+ */
+
+// #define	VERBOSE		/* extra debug messages (success too) */
+// #define	USB_TRACE	/* packet-level success messages */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/prefetch.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/unaligned.h>
+
+
+#include "goku_udc.h"
+
+#define	DRIVER_DESC		"TC86C001 USB Device Controller"
+#define	DRIVER_VERSION		"30-Oct 2003"
+
+static const char driver_name [] = "goku_udc";
+static const char driver_desc [] = DRIVER_DESC;
+
+MODULE_AUTHOR("source@mvista.com");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+
+/*
+ * IN dma behaves ok under testing, though the IN-dma abort paths don't
+ * seem to behave quite as expected.  Used by default.
+ *
+ * OUT dma documents design problems handling the common "short packet"
+ * transfer termination policy; it couldn't be enabled by default, even
+ * if the OUT-dma abort problems had a resolution.
+ */
+static unsigned use_dma = 1;
+
+#if 0
+//#include <linux/moduleparam.h>
+/* "modprobe goku_udc use_dma=1" etc
+ *	0 to disable dma
+ *	1 to use IN dma only (normal operation)
+ *	2 to use IN and OUT dma
+ */
+module_param(use_dma, uint, S_IRUGO);
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static void nuke(struct goku_ep *, int status);
+
+static inline void
+command(struct goku_udc_regs __iomem *regs, int command, unsigned epnum)
+{
+	writel(COMMAND_EP(epnum) | command, &regs->Command);
+	udelay(300);
+}
+
+static int
+goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+{
+	struct goku_udc	*dev;
+	struct goku_ep	*ep;
+	u32		mode;
+	u16		max;
+	unsigned long	flags;
+
+	ep = container_of(_ep, struct goku_ep, ep);
+	if (!_ep || !desc
+			|| desc->bDescriptorType != USB_DT_ENDPOINT)
+		return -EINVAL;
+	dev = ep->dev;
+	if (ep == &dev->ep[0])
+		return -EINVAL;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+	if (ep->num != usb_endpoint_num(desc))
+		return -EINVAL;
+
+	switch (usb_endpoint_type(desc)) {
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_INT:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if ((readl(ep->reg_status) & EPxSTATUS_EP_MASK)
+			!= EPxSTATUS_EP_INVALID)
+		return -EBUSY;
+
+	/* enabling the no-toggle interrupt mode would need an api hook */
+	mode = 0;
+	max = get_unaligned_le16(&desc->wMaxPacketSize);
+	switch (max) {
+	case 64:
+		mode++;
+		fallthrough;
+	case 32:
+		mode++;
+		fallthrough;
+	case 16:
+		mode++;
+		fallthrough;
+	case 8:
+		mode <<= 3;
+		break;
+	default:
+		return -EINVAL;
+	}
+	mode |= 2 << 1;		/* bulk, or intr-with-toggle */
+
+	/* ep1/ep2 dma direction is chosen early; it works in the other
+	 * direction, with pio.  be cautious with out-dma.
+	 */
+	ep->is_in = usb_endpoint_dir_in(desc);
+	if (ep->is_in) {
+		mode |= 1;
+		ep->dma = (use_dma != 0) && (ep->num == UDC_MSTRD_ENDPOINT);
+	} else {
+		ep->dma = (use_dma == 2) && (ep->num == UDC_MSTWR_ENDPOINT);
+		if (ep->dma)
+			DBG(dev, "%s out-dma hides short packets\n",
+				ep->ep.name);
+	}
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+
+	/* ep1 and ep2 can do double buffering and/or dma */
+	if (ep->num < 3) {
+		struct goku_udc_regs __iomem	*regs = ep->dev->regs;
+		u32				tmp;
+
+		/* double buffer except (for now) with pio in */
+		tmp = ((ep->dma || !ep->is_in)
+				? 0x10	/* double buffered */
+				: 0x11	/* single buffer */
+			) << ep->num;
+		tmp |= readl(&regs->EPxSingle);
+		writel(tmp, &regs->EPxSingle);
+
+		tmp = (ep->dma ? 0x10/*dma*/ : 0x11/*pio*/) << ep->num;
+		tmp |= readl(&regs->EPxBCS);
+		writel(tmp, &regs->EPxBCS);
+	}
+	writel(mode, ep->reg_mode);
+	command(ep->dev->regs, COMMAND_RESET, ep->num);
+	ep->ep.maxpacket = max;
+	ep->stopped = 0;
+	ep->ep.desc = desc;
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+
+	DBG(dev, "enable %s %s %s maxpacket %u\n", ep->ep.name,
+		ep->is_in ? "IN" : "OUT",
+		ep->dma ? "dma" : "pio",
+		max);
+
+	return 0;
+}
+
+static void ep_reset(struct goku_udc_regs __iomem *regs, struct goku_ep *ep)
+{
+	struct goku_udc		*dev = ep->dev;
+
+	if (regs) {
+		command(regs, COMMAND_INVALID, ep->num);
+		if (ep->num) {
+			if (ep->num == UDC_MSTWR_ENDPOINT)
+				dev->int_enable &= ~(INT_MSTWREND
+							|INT_MSTWRTMOUT);
+			else if (ep->num == UDC_MSTRD_ENDPOINT)
+				dev->int_enable &= ~INT_MSTRDEND;
+			dev->int_enable &= ~INT_EPxDATASET (ep->num);
+		} else
+			dev->int_enable &= ~INT_EP0;
+		writel(dev->int_enable, &regs->int_enable);
+		readl(&regs->int_enable);
+		if (ep->num < 3) {
+			struct goku_udc_regs __iomem	*r = ep->dev->regs;
+			u32				tmp;
+
+			tmp = readl(&r->EPxSingle);
+			tmp &= ~(0x11 << ep->num);
+			writel(tmp, &r->EPxSingle);
+
+			tmp = readl(&r->EPxBCS);
+			tmp &= ~(0x11 << ep->num);
+			writel(tmp, &r->EPxBCS);
+		}
+		/* reset dma in case we're still using it */
+		if (ep->dma) {
+			u32	master;
+
+			master = readl(&regs->dma_master) & MST_RW_BITS;
+			if (ep->num == UDC_MSTWR_ENDPOINT) {
+				master &= ~MST_W_BITS;
+				master |= MST_WR_RESET;
+			} else {
+				master &= ~MST_R_BITS;
+				master |= MST_RD_RESET;
+			}
+			writel(master, &regs->dma_master);
+		}
+	}
+
+	usb_ep_set_maxpacket_limit(&ep->ep, MAX_FIFO_SIZE);
+	ep->ep.desc = NULL;
+	ep->stopped = 1;
+	ep->irqs = 0;
+	ep->dma = 0;
+}
+
+static int goku_ep_disable(struct usb_ep *_ep)
+{
+	struct goku_ep	*ep;
+	struct goku_udc	*dev;
+	unsigned long	flags;
+
+	ep = container_of(_ep, struct goku_ep, ep);
+	if (!_ep || !ep->ep.desc)
+		return -ENODEV;
+	dev = ep->dev;
+	if (dev->ep0state == EP0_SUSPEND)
+		return -EBUSY;
+
+	VDBG(dev, "disable %s\n", _ep->name);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	nuke(ep, -ESHUTDOWN);
+	ep_reset(dev->regs, ep);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_request *
+goku_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct goku_request	*req;
+
+	if (!_ep)
+		return NULL;
+	req = kzalloc(sizeof *req, gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+	return &req->req;
+}
+
+static void
+goku_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct goku_request	*req;
+
+	if (!_ep || !_req)
+		return;
+
+	req = container_of(_req, struct goku_request, req);
+	WARN_ON(!list_empty(&req->queue));
+	kfree(req);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void
+done(struct goku_ep *ep, struct goku_request *req, int status)
+{
+	struct goku_udc		*dev;
+	unsigned		stopped = ep->stopped;
+
+	list_del_init(&req->queue);
+
+	if (likely(req->req.status == -EINPROGRESS))
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	dev = ep->dev;
+
+	if (ep->dma)
+		usb_gadget_unmap_request(&dev->gadget, &req->req, ep->is_in);
+
+#ifndef USB_TRACE
+	if (status && status != -ESHUTDOWN)
+#endif
+		VDBG(dev, "complete %s req %p stat %d len %u/%u\n",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length);
+
+	/* don't modify queue heads during completion callback */
+	ep->stopped = 1;
+	spin_unlock(&dev->lock);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&dev->lock);
+	ep->stopped = stopped;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline int
+write_packet(u32 __iomem *fifo, u8 *buf, struct goku_request *req, unsigned max)
+{
+	unsigned	length, count;
+
+	length = min(req->req.length - req->req.actual, max);
+	req->req.actual += length;
+
+	count = length;
+	while (likely(count--))
+		writel(*buf++, fifo);
+	return length;
+}
+
+// return:  0 = still running, 1 = completed, negative = errno
+static int write_fifo(struct goku_ep *ep, struct goku_request *req)
+{
+	struct goku_udc	*dev = ep->dev;
+	u32		tmp;
+	u8		*buf;
+	unsigned	count;
+	int		is_last;
+
+	tmp = readl(&dev->regs->DataSet);
+	buf = req->req.buf + req->req.actual;
+	prefetch(buf);
+
+	dev = ep->dev;
+	if (unlikely(ep->num == 0 && dev->ep0state != EP0_IN))
+		return -EL2HLT;
+
+	/* NOTE:  just single-buffered PIO-IN for now.  */
+	if (unlikely((tmp & DATASET_A(ep->num)) != 0))
+		return 0;
+
+	/* clear our "packet available" irq */
+	if (ep->num != 0)
+		writel(~INT_EPxDATASET(ep->num), &dev->regs->int_status);
+
+	count = write_packet(ep->reg_fifo, buf, req, ep->ep.maxpacket);
+
+	/* last packet often short (sometimes a zlp, especially on ep0) */
+	if (unlikely(count != ep->ep.maxpacket)) {
+		writel(~(1<<ep->num), &dev->regs->EOP);
+		if (ep->num == 0) {
+			dev->ep[0].stopped = 1;
+			dev->ep0state = EP0_STATUS;
+		}
+		is_last = 1;
+	} else {
+		if (likely(req->req.length != req->req.actual)
+				|| req->req.zero)
+			is_last = 0;
+		else
+			is_last = 1;
+	}
+#if 0		/* printk seemed to trash is_last...*/
+//#ifdef USB_TRACE
+	VDBG(dev, "wrote %s %u bytes%s IN %u left %p\n",
+		ep->ep.name, count, is_last ? "/last" : "",
+		req->req.length - req->req.actual, req);
+#endif
+
+	/* requests complete when all IN data is in the FIFO,
+	 * or sometimes later, if a zlp was needed.
+	 */
+	if (is_last) {
+		done(ep, req, 0);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int read_fifo(struct goku_ep *ep, struct goku_request *req)
+{
+	struct goku_udc_regs __iomem	*regs;
+	u32				size, set;
+	u8				*buf;
+	unsigned			bufferspace, is_short, dbuff;
+
+	regs = ep->dev->regs;
+top:
+	buf = req->req.buf + req->req.actual;
+	prefetchw(buf);
+
+	if (unlikely(ep->num == 0 && ep->dev->ep0state != EP0_OUT))
+		return -EL2HLT;
+
+	dbuff = (ep->num == 1 || ep->num == 2);
+	do {
+		/* ack dataset irq matching the status we'll handle */
+		if (ep->num != 0)
+			writel(~INT_EPxDATASET(ep->num), &regs->int_status);
+
+		set = readl(&regs->DataSet) & DATASET_AB(ep->num);
+		size = readl(&regs->EPxSizeLA[ep->num]);
+		bufferspace = req->req.length - req->req.actual;
+
+		/* usually do nothing without an OUT packet */
+		if (likely(ep->num != 0 || bufferspace != 0)) {
+			if (unlikely(set == 0))
+				break;
+			/* use ep1/ep2 double-buffering for OUT */
+			if (!(size & PACKET_ACTIVE))
+				size = readl(&regs->EPxSizeLB[ep->num]);
+			if (!(size & PACKET_ACTIVE))	/* "can't happen" */
+				break;
+			size &= DATASIZE;	/* EPxSizeH == 0 */
+
+		/* ep0out no-out-data case for set_config, etc */
+		} else
+			size = 0;
+
+		/* read all bytes from this packet */
+		req->req.actual += size;
+		is_short = (size < ep->ep.maxpacket);
+#ifdef USB_TRACE
+		VDBG(ep->dev, "read %s %u bytes%s OUT req %p %u/%u\n",
+			ep->ep.name, size, is_short ? "/S" : "",
+			req, req->req.actual, req->req.length);
+#endif
+		while (likely(size-- != 0)) {
+			u8	byte = (u8) readl(ep->reg_fifo);
+
+			if (unlikely(bufferspace == 0)) {
+				/* this happens when the driver's buffer
+				 * is smaller than what the host sent.
+				 * discard the extra data in this packet.
+				 */
+				if (req->req.status != -EOVERFLOW)
+					DBG(ep->dev, "%s overflow %u\n",
+						ep->ep.name, size);
+				req->req.status = -EOVERFLOW;
+			} else {
+				*buf++ = byte;
+				bufferspace--;
+			}
+		}
+
+		/* completion */
+		if (unlikely(is_short || req->req.actual == req->req.length)) {
+			if (unlikely(ep->num == 0)) {
+				/* non-control endpoints now usable? */
+				if (ep->dev->req_config)
+					writel(ep->dev->configured
+							? USBSTATE_CONFIGURED
+							: 0,
+						&regs->UsbState);
+				/* ep0out status stage */
+				writel(~(1<<0), &regs->EOP);
+				ep->stopped = 1;
+				ep->dev->ep0state = EP0_STATUS;
+			}
+			done(ep, req, 0);
+
+			/* empty the second buffer asap */
+			if (dbuff && !list_empty(&ep->queue)) {
+				req = list_entry(ep->queue.next,
+						struct goku_request, queue);
+				goto top;
+			}
+			return 1;
+		}
+	} while (dbuff);
+	return 0;
+}
+
+static inline void
+pio_irq_enable(struct goku_udc *dev,
+		struct goku_udc_regs __iomem *regs, int epnum)
+{
+	dev->int_enable |= INT_EPxDATASET (epnum);
+	writel(dev->int_enable, &regs->int_enable);
+	/* write may still be posted */
+}
+
+static inline void
+pio_irq_disable(struct goku_udc *dev,
+		struct goku_udc_regs __iomem *regs, int epnum)
+{
+	dev->int_enable &= ~INT_EPxDATASET (epnum);
+	writel(dev->int_enable, &regs->int_enable);
+	/* write may still be posted */
+}
+
+static inline void
+pio_advance(struct goku_ep *ep)
+{
+	struct goku_request	*req;
+
+	if (unlikely(list_empty (&ep->queue)))
+		return;
+	req = list_entry(ep->queue.next, struct goku_request, queue);
+	(ep->is_in ? write_fifo : read_fifo)(ep, req);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+// return:  0 = q running, 1 = q stopped, negative = errno
+static int start_dma(struct goku_ep *ep, struct goku_request *req)
+{
+	struct goku_udc_regs __iomem	*regs = ep->dev->regs;
+	u32				master;
+	u32				start = req->req.dma;
+	u32				end = start + req->req.length - 1;
+
+	master = readl(&regs->dma_master) & MST_RW_BITS;
+
+	/* re-init the bits affecting IN dma; careful with zlps */
+	if (likely(ep->is_in)) {
+		if (unlikely(master & MST_RD_ENA)) {
+			DBG (ep->dev, "start, IN active dma %03x!!\n",
+				master);
+//			return -EL2HLT;
+		}
+		writel(end, &regs->in_dma_end);
+		writel(start, &regs->in_dma_start);
+
+		master &= ~MST_R_BITS;
+		if (unlikely(req->req.length == 0))
+			master |= MST_RD_ENA | MST_RD_EOPB;
+		else if ((req->req.length % ep->ep.maxpacket) != 0
+					|| req->req.zero)
+			master |= MST_RD_ENA | MST_EOPB_ENA;
+		else
+			master |= MST_RD_ENA | MST_EOPB_DIS;
+
+		ep->dev->int_enable |= INT_MSTRDEND;
+
+	/* Goku DMA-OUT merges short packets, which plays poorly with
+	 * protocols where short packets mark the transfer boundaries.
+	 * The chip supports a nonstandard policy with INT_MSTWRTMOUT,
+	 * ending transfers after 3 SOFs; we don't turn it on.
+	 */
+	} else {
+		if (unlikely(master & MST_WR_ENA)) {
+			DBG (ep->dev, "start, OUT active dma %03x!!\n",
+				master);
+//			return -EL2HLT;
+		}
+		writel(end, &regs->out_dma_end);
+		writel(start, &regs->out_dma_start);
+
+		master &= ~MST_W_BITS;
+		master |= MST_WR_ENA | MST_TIMEOUT_DIS;
+
+		ep->dev->int_enable |= INT_MSTWREND|INT_MSTWRTMOUT;
+	}
+
+	writel(master, &regs->dma_master);
+	writel(ep->dev->int_enable, &regs->int_enable);
+	return 0;
+}
+
+static void dma_advance(struct goku_udc *dev, struct goku_ep *ep)
+{
+	struct goku_request		*req;
+	struct goku_udc_regs __iomem	*regs = ep->dev->regs;
+	u32				master;
+
+	master = readl(&regs->dma_master);
+
+	if (unlikely(list_empty(&ep->queue))) {
+stop:
+		if (ep->is_in)
+			dev->int_enable &= ~INT_MSTRDEND;
+		else
+			dev->int_enable &= ~(INT_MSTWREND|INT_MSTWRTMOUT);
+		writel(dev->int_enable, &regs->int_enable);
+		return;
+	}
+	req = list_entry(ep->queue.next, struct goku_request, queue);
+
+	/* normal hw dma completion (not abort) */
+	if (likely(ep->is_in)) {
+		if (unlikely(master & MST_RD_ENA))
+			return;
+		req->req.actual = readl(&regs->in_dma_current);
+	} else {
+		if (unlikely(master & MST_WR_ENA))
+			return;
+
+		/* hardware merges short packets, and also hides packet
+		 * overruns.  a partial packet MAY be in the fifo here.
+		 */
+		req->req.actual = readl(&regs->out_dma_current);
+	}
+	req->req.actual -= req->req.dma;
+	req->req.actual++;
+
+#ifdef USB_TRACE
+	VDBG(dev, "done %s %s dma, %u/%u bytes, req %p\n",
+		ep->ep.name, ep->is_in ? "IN" : "OUT",
+		req->req.actual, req->req.length, req);
+#endif
+	done(ep, req, 0);
+	if (list_empty(&ep->queue))
+		goto stop;
+	req = list_entry(ep->queue.next, struct goku_request, queue);
+	(void) start_dma(ep, req);
+}
+
+static void abort_dma(struct goku_ep *ep, int status)
+{
+	struct goku_udc_regs __iomem	*regs = ep->dev->regs;
+	struct goku_request		*req;
+	u32				curr, master;
+
+	/* NAK future host requests, hoping the implicit delay lets the
+	 * dma engine finish reading (or writing) its latest packet and
+	 * empty the dma buffer (up to 16 bytes).
+	 *
+	 * This avoids needing to clean up a partial packet in the fifo;
+	 * we can't do that for IN without side effects to HALT and TOGGLE.
+	 */
+	command(regs, COMMAND_FIFO_DISABLE, ep->num);
+	req = list_entry(ep->queue.next, struct goku_request, queue);
+	master = readl(&regs->dma_master) & MST_RW_BITS;
+
+	/* FIXME using these resets isn't usably documented. this may
+	 * not work unless it's followed by disabling the endpoint.
+	 *
+	 * FIXME the OUT reset path doesn't even behave consistently.
+	 */
+	if (ep->is_in) {
+		if (unlikely((readl(&regs->dma_master) & MST_RD_ENA) == 0))
+			goto finished;
+		curr = readl(&regs->in_dma_current);
+
+		writel(curr, &regs->in_dma_end);
+		writel(curr, &regs->in_dma_start);
+
+		master &= ~MST_R_BITS;
+		master |= MST_RD_RESET;
+		writel(master, &regs->dma_master);
+
+		if (readl(&regs->dma_master) & MST_RD_ENA)
+			DBG(ep->dev, "IN dma active after reset!\n");
+
+	} else {
+		if (unlikely((readl(&regs->dma_master) & MST_WR_ENA) == 0))
+			goto finished;
+		curr = readl(&regs->out_dma_current);
+
+		writel(curr, &regs->out_dma_end);
+		writel(curr, &regs->out_dma_start);
+
+		master &= ~MST_W_BITS;
+		master |= MST_WR_RESET;
+		writel(master, &regs->dma_master);
+
+		if (readl(&regs->dma_master) & MST_WR_ENA)
+			DBG(ep->dev, "OUT dma active after reset!\n");
+	}
+	req->req.actual = (curr - req->req.dma) + 1;
+	req->req.status = status;
+
+	VDBG(ep->dev, "%s %s %s %d/%d\n", __func__, ep->ep.name,
+		ep->is_in ? "IN" : "OUT",
+		req->req.actual, req->req.length);
+
+	command(regs, COMMAND_FIFO_ENABLE, ep->num);
+
+	return;
+
+finished:
+	/* dma already completed; no abort needed */
+	command(regs, COMMAND_FIFO_ENABLE, ep->num);
+	req->req.actual = req->req.length;
+	req->req.status = 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+goku_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct goku_request	*req;
+	struct goku_ep		*ep;
+	struct goku_udc		*dev;
+	unsigned long		flags;
+	int			status;
+
+	/* always require a cpu-view buffer so pio works */
+	req = container_of(_req, struct goku_request, req);
+	if (unlikely(!_req || !_req->complete
+			|| !_req->buf || !list_empty(&req->queue)))
+		return -EINVAL;
+	ep = container_of(_ep, struct goku_ep, ep);
+	if (unlikely(!_ep || (!ep->ep.desc && ep->num != 0)))
+		return -EINVAL;
+	dev = ep->dev;
+	if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+
+	/* can't touch registers when suspended */
+	if (dev->ep0state == EP0_SUSPEND)
+		return -EBUSY;
+
+	/* set up dma mapping in case the caller didn't */
+	if (ep->dma) {
+		status = usb_gadget_map_request(&dev->gadget, &req->req,
+				ep->is_in);
+		if (status)
+			return status;
+	}
+
+#ifdef USB_TRACE
+	VDBG(dev, "%s queue req %p, len %u buf %p\n",
+			_ep->name, _req, _req->length, _req->buf);
+#endif
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	/* for ep0 IN without premature status, zlp is required and
+	 * writing EOP starts the status stage (OUT).
+	 */
+	if (unlikely(ep->num == 0 && ep->is_in))
+		_req->zero = 1;
+
+	/* kickstart this i/o queue? */
+	status = 0;
+	if (list_empty(&ep->queue) && likely(!ep->stopped)) {
+		/* dma:  done after dma completion IRQ (or error)
+		 * pio:  done after last fifo operation
+		 */
+		if (ep->dma)
+			status = start_dma(ep, req);
+		else
+			status = (ep->is_in ? write_fifo : read_fifo)(ep, req);
+
+		if (unlikely(status != 0)) {
+			if (status > 0)
+				status = 0;
+			req = NULL;
+		}
+
+	} /* else pio or dma irq handler advances the queue. */
+
+	if (likely(req != NULL))
+		list_add_tail(&req->queue, &ep->queue);
+
+	if (likely(!list_empty(&ep->queue))
+			&& likely(ep->num != 0)
+			&& !ep->dma
+			&& !(dev->int_enable & INT_EPxDATASET (ep->num)))
+		pio_irq_enable(dev, dev->regs, ep->num);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	/* pci writes may still be posted */
+	return status;
+}
+
+/* dequeue ALL requests */
+static void nuke(struct goku_ep *ep, int status)
+{
+	struct goku_request	*req;
+
+	ep->stopped = 1;
+	if (list_empty(&ep->queue))
+		return;
+	if (ep->dma)
+		abort_dma(ep, status);
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct goku_request, queue);
+		done(ep, req, status);
+	}
+}
+
+/* dequeue JUST ONE request */
+static int goku_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct goku_request	*req = NULL, *iter;
+	struct goku_ep		*ep;
+	struct goku_udc		*dev;
+	unsigned long		flags;
+
+	ep = container_of(_ep, struct goku_ep, ep);
+	if (!_ep || !_req || (!ep->ep.desc && ep->num != 0))
+		return -EINVAL;
+	dev = ep->dev;
+	if (!dev->driver)
+		return -ESHUTDOWN;
+
+	/* we can't touch (dma) registers when suspended */
+	if (dev->ep0state == EP0_SUSPEND)
+		return -EBUSY;
+
+	VDBG(dev, "%s %s %s %s %p\n", __func__, _ep->name,
+		ep->is_in ? "IN" : "OUT",
+		ep->dma ? "dma" : "pio",
+		_req);
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		req = iter;
+		break;
+	}
+	if (!req) {
+		spin_unlock_irqrestore (&dev->lock, flags);
+		return -EINVAL;
+	}
+
+	if (ep->dma && ep->queue.next == &req->queue && !ep->stopped) {
+		abort_dma(ep, -ECONNRESET);
+		done(ep, req, -ECONNRESET);
+		dma_advance(dev, ep);
+	} else if (!list_empty(&req->queue))
+		done(ep, req, -ECONNRESET);
+	else
+		req = NULL;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return req ? 0 : -EOPNOTSUPP;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void goku_clear_halt(struct goku_ep *ep)
+{
+	// assert (ep->num !=0)
+	VDBG(ep->dev, "%s clear halt\n", ep->ep.name);
+	command(ep->dev->regs, COMMAND_SETDATA0, ep->num);
+	command(ep->dev->regs, COMMAND_STALL_CLEAR, ep->num);
+	if (ep->stopped) {
+		ep->stopped = 0;
+		if (ep->dma) {
+			struct goku_request	*req;
+
+			if (list_empty(&ep->queue))
+				return;
+			req = list_entry(ep->queue.next, struct goku_request,
+						queue);
+			(void) start_dma(ep, req);
+		} else
+			pio_advance(ep);
+	}
+}
+
+static int goku_set_halt(struct usb_ep *_ep, int value)
+{
+	struct goku_ep	*ep;
+	unsigned long	flags;
+	int		retval = 0;
+
+	if (!_ep)
+		return -ENODEV;
+	ep = container_of (_ep, struct goku_ep, ep);
+
+	if (ep->num == 0) {
+		if (value) {
+			ep->dev->ep0state = EP0_STALL;
+			ep->dev->ep[0].stopped = 1;
+		} else
+			return -EINVAL;
+
+	/* don't change EPxSTATUS_EP_INVALID to READY */
+	} else if (!ep->ep.desc) {
+		DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	if (!list_empty(&ep->queue))
+		retval = -EAGAIN;
+	else if (ep->is_in && value
+			/* data in (either) packet buffer? */
+			&& (readl(&ep->dev->regs->DataSet)
+					& DATASET_AB(ep->num)))
+		retval = -EAGAIN;
+	else if (!value)
+		goku_clear_halt(ep);
+	else {
+		ep->stopped = 1;
+		VDBG(ep->dev, "%s set halt\n", ep->ep.name);
+		command(ep->dev->regs, COMMAND_STALL, ep->num);
+		readl(ep->reg_status);
+	}
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+	return retval;
+}
+
+static int goku_fifo_status(struct usb_ep *_ep)
+{
+	struct goku_ep			*ep;
+	struct goku_udc_regs __iomem	*regs;
+	u32				size;
+
+	if (!_ep)
+		return -ENODEV;
+	ep = container_of(_ep, struct goku_ep, ep);
+
+	/* size is only reported sanely for OUT */
+	if (ep->is_in)
+		return -EOPNOTSUPP;
+
+	/* ignores 16-byte dma buffer; SizeH == 0 */
+	regs = ep->dev->regs;
+	size = readl(&regs->EPxSizeLA[ep->num]) & DATASIZE;
+	size += readl(&regs->EPxSizeLB[ep->num]) & DATASIZE;
+	VDBG(ep->dev, "%s %s %u\n", __func__, ep->ep.name, size);
+	return size;
+}
+
+static void goku_fifo_flush(struct usb_ep *_ep)
+{
+	struct goku_ep			*ep;
+	struct goku_udc_regs __iomem	*regs;
+	u32				size;
+
+	if (!_ep)
+		return;
+	ep = container_of(_ep, struct goku_ep, ep);
+	VDBG(ep->dev, "%s %s\n", __func__, ep->ep.name);
+
+	/* don't change EPxSTATUS_EP_INVALID to READY */
+	if (!ep->ep.desc && ep->num != 0) {
+		DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name);
+		return;
+	}
+
+	regs = ep->dev->regs;
+	size = readl(&regs->EPxSizeLA[ep->num]);
+	size &= DATASIZE;
+
+	/* Non-desirable behavior:  FIFO_CLEAR also clears the
+	 * endpoint halt feature.  For OUT, we _could_ just read
+	 * the bytes out (PIO, if !ep->dma); for in, no choice.
+	 */
+	if (size)
+		command(regs, COMMAND_FIFO_CLEAR, ep->num);
+}
+
+static const struct usb_ep_ops goku_ep_ops = {
+	.enable		= goku_ep_enable,
+	.disable	= goku_ep_disable,
+
+	.alloc_request	= goku_alloc_request,
+	.free_request	= goku_free_request,
+
+	.queue		= goku_queue,
+	.dequeue	= goku_dequeue,
+
+	.set_halt	= goku_set_halt,
+	.fifo_status	= goku_fifo_status,
+	.fifo_flush	= goku_fifo_flush,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int goku_get_frame(struct usb_gadget *_gadget)
+{
+	return -EOPNOTSUPP;
+}
+
+static struct usb_ep *goku_match_ep(struct usb_gadget *g,
+		struct usb_endpoint_descriptor *desc,
+		struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+	struct goku_udc	*dev = to_goku_udc(g);
+	struct usb_ep *ep;
+
+	switch (usb_endpoint_type(desc)) {
+	case USB_ENDPOINT_XFER_INT:
+		/* single buffering is enough */
+		ep = &dev->ep[3].ep;
+		if (usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
+			return ep;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		if (usb_endpoint_dir_in(desc)) {
+			/* DMA may be available */
+			ep = &dev->ep[2].ep;
+			if (usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
+				return ep;
+		}
+		break;
+	default:
+		/* nothing */ ;
+	}
+
+	return NULL;
+}
+
+static int goku_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+static int goku_udc_stop(struct usb_gadget *g);
+
+static const struct usb_gadget_ops goku_ops = {
+	.get_frame	= goku_get_frame,
+	.udc_start	= goku_udc_start,
+	.udc_stop	= goku_udc_stop,
+	.match_ep	= goku_match_ep,
+	// no remote wakeup
+	// not selfpowered
+};
+
+/*-------------------------------------------------------------------------*/
+
+static inline const char *dmastr(void)
+{
+	if (use_dma == 0)
+		return "(dma disabled)";
+	else if (use_dma == 2)
+		return "(dma IN and OUT)";
+	else
+		return "(dma IN)";
+}
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static const char proc_node_name [] = "driver/udc";
+
+#define FOURBITS "%s%s%s%s"
+#define EIGHTBITS FOURBITS FOURBITS
+
+static void dump_intmask(struct seq_file *m, const char *label, u32 mask)
+{
+	/* int_status is the same format ... */
+	seq_printf(m, "%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n",
+		   label, mask,
+		   (mask & INT_PWRDETECT) ? " power" : "",
+		   (mask & INT_SYSERROR) ? " sys" : "",
+		   (mask & INT_MSTRDEND) ? " in-dma" : "",
+		   (mask & INT_MSTWRTMOUT) ? " wrtmo" : "",
+
+		   (mask & INT_MSTWREND) ? " out-dma" : "",
+		   (mask & INT_MSTWRSET) ? " wrset" : "",
+		   (mask & INT_ERR) ? " err" : "",
+		   (mask & INT_SOF) ? " sof" : "",
+
+		   (mask & INT_EP3NAK) ? " ep3nak" : "",
+		   (mask & INT_EP2NAK) ? " ep2nak" : "",
+		   (mask & INT_EP1NAK) ? " ep1nak" : "",
+		   (mask & INT_EP3DATASET) ? " ep3" : "",
+
+		   (mask & INT_EP2DATASET) ? " ep2" : "",
+		   (mask & INT_EP1DATASET) ? " ep1" : "",
+		   (mask & INT_STATUSNAK) ? " ep0snak" : "",
+		   (mask & INT_STATUS) ? " ep0status" : "",
+
+		   (mask & INT_SETUP) ? " setup" : "",
+		   (mask & INT_ENDPOINT0) ? " ep0" : "",
+		   (mask & INT_USBRESET) ? " reset" : "",
+		   (mask & INT_SUSPEND) ? " suspend" : "");
+}
+
+static const char *udc_ep_state(enum ep0state state)
+{
+	switch (state) {
+	case EP0_DISCONNECT:
+		return "ep0_disconnect";
+	case EP0_IDLE:
+		return "ep0_idle";
+	case EP0_IN:
+		return "ep0_in";
+	case EP0_OUT:
+		return "ep0_out";
+	case EP0_STATUS:
+		return "ep0_status";
+	case EP0_STALL:
+		return "ep0_stall";
+	case EP0_SUSPEND:
+		return "ep0_suspend";
+	}
+
+	return "ep0_?";
+}
+
+static const char *udc_ep_status(u32 status)
+{
+	switch (status & EPxSTATUS_EP_MASK) {
+	case EPxSTATUS_EP_READY:
+		return "ready";
+	case EPxSTATUS_EP_DATAIN:
+		return "packet";
+	case EPxSTATUS_EP_FULL:
+		return "full";
+	case EPxSTATUS_EP_TX_ERR:	/* host will retry */
+		return "tx_err";
+	case EPxSTATUS_EP_RX_ERR:
+		return "rx_err";
+	case EPxSTATUS_EP_BUSY:		/* ep0 only */
+		return "busy";
+	case EPxSTATUS_EP_STALL:
+		return "stall";
+	case EPxSTATUS_EP_INVALID:	/* these "can't happen" */
+		return "invalid";
+	}
+
+	return "?";
+}
+
+static int udc_proc_read(struct seq_file *m, void *v)
+{
+	struct goku_udc			*dev = m->private;
+	struct goku_udc_regs __iomem	*regs = dev->regs;
+	unsigned long			flags;
+	int				i, is_usb_connected;
+	u32				tmp;
+
+	local_irq_save(flags);
+
+	/* basic device status */
+	tmp = readl(&regs->power_detect);
+	is_usb_connected = tmp & PW_DETECT;
+	seq_printf(m,
+		   "%s - %s\n"
+		   "%s version: %s %s\n"
+		   "Gadget driver: %s\n"
+		   "Host %s, %s\n"
+		   "\n",
+		   pci_name(dev->pdev), driver_desc,
+		   driver_name, DRIVER_VERSION, dmastr(),
+		   dev->driver ? dev->driver->driver.name : "(none)",
+		   is_usb_connected
+			   ? ((tmp & PW_PULLUP) ? "full speed" : "powered")
+			   : "disconnected",
+		   udc_ep_state(dev->ep0state));
+
+	dump_intmask(m, "int_status", readl(&regs->int_status));
+	dump_intmask(m, "int_enable", readl(&regs->int_enable));
+
+	if (!is_usb_connected || !dev->driver || (tmp & PW_PULLUP) == 0)
+		goto done;
+
+	/* registers for (active) device and ep0 */
+	seq_printf(m, "\nirqs %lu\ndataset %02x single.bcs %02x.%02x state %x addr %u\n",
+		   dev->irqs, readl(&regs->DataSet),
+		   readl(&regs->EPxSingle), readl(&regs->EPxBCS),
+		   readl(&regs->UsbState),
+		   readl(&regs->address));
+	if (seq_has_overflowed(m))
+		goto done;
+
+	tmp = readl(&regs->dma_master);
+	seq_printf(m, "dma %03X =" EIGHTBITS "%s %s\n",
+		   tmp,
+		   (tmp & MST_EOPB_DIS) ? " eopb-" : "",
+		   (tmp & MST_EOPB_ENA) ? " eopb+" : "",
+		   (tmp & MST_TIMEOUT_DIS) ? " tmo-" : "",
+		   (tmp & MST_TIMEOUT_ENA) ? " tmo+" : "",
+
+		   (tmp & MST_RD_EOPB) ? " eopb" : "",
+		   (tmp & MST_RD_RESET) ? " in_reset" : "",
+		   (tmp & MST_WR_RESET) ? " out_reset" : "",
+		   (tmp & MST_RD_ENA) ? " IN" : "",
+
+		   (tmp & MST_WR_ENA) ? " OUT" : "",
+		   (tmp & MST_CONNECTION) ? "ep1in/ep2out" : "ep1out/ep2in");
+	if (seq_has_overflowed(m))
+		goto done;
+
+	/* dump endpoint queues */
+	for (i = 0; i < 4; i++) {
+		struct goku_ep		*ep = &dev->ep [i];
+		struct goku_request	*req;
+
+		if (i && !ep->ep.desc)
+			continue;
+
+		tmp = readl(ep->reg_status);
+		seq_printf(m, "%s %s max %u %s, irqs %lu, status %02x (%s) " FOURBITS "\n",
+			   ep->ep.name,
+			   ep->is_in ? "in" : "out",
+			   ep->ep.maxpacket,
+			   ep->dma ? "dma" : "pio",
+			   ep->irqs,
+			   tmp, udc_ep_status(tmp),
+			   (tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0",
+			   (tmp & EPxSTATUS_SUSPEND) ? " suspend" : "",
+			   (tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "",
+			   (tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : "");
+		if (seq_has_overflowed(m))
+			goto done;
+
+		if (list_empty(&ep->queue)) {
+			seq_puts(m, "\t(nothing queued)\n");
+			if (seq_has_overflowed(m))
+				goto done;
+			continue;
+		}
+		list_for_each_entry(req, &ep->queue, queue) {
+			if (ep->dma && req->queue.prev == &ep->queue) {
+				if (i == UDC_MSTRD_ENDPOINT)
+					tmp = readl(&regs->in_dma_current);
+				else
+					tmp = readl(&regs->out_dma_current);
+				tmp -= req->req.dma;
+				tmp++;
+			} else
+				tmp = req->req.actual;
+
+			seq_printf(m, "\treq %p len %u/%u buf %p\n",
+				   &req->req, tmp, req->req.length,
+				   req->req.buf);
+			if (seq_has_overflowed(m))
+				goto done;
+		}
+	}
+
+done:
+	local_irq_restore(flags);
+	return 0;
+}
+#endif	/* CONFIG_USB_GADGET_DEBUG_FILES */
+
+/*-------------------------------------------------------------------------*/
+
+static void udc_reinit (struct goku_udc *dev)
+{
+	static char *names [] = { "ep0", "ep1-bulk", "ep2-bulk", "ep3-bulk" };
+
+	unsigned i;
+
+	INIT_LIST_HEAD (&dev->gadget.ep_list);
+	dev->gadget.ep0 = &dev->ep [0].ep;
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+	dev->ep0state = EP0_DISCONNECT;
+	dev->irqs = 0;
+
+	for (i = 0; i < 4; i++) {
+		struct goku_ep	*ep = &dev->ep[i];
+
+		ep->num = i;
+		ep->ep.name = names[i];
+		ep->reg_fifo = &dev->regs->ep_fifo [i];
+		ep->reg_status = &dev->regs->ep_status [i];
+		ep->reg_mode = &dev->regs->ep_mode[i];
+
+		ep->ep.ops = &goku_ep_ops;
+		list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
+		ep->dev = dev;
+		INIT_LIST_HEAD (&ep->queue);
+
+		ep_reset(NULL, ep);
+
+		if (i == 0)
+			ep->ep.caps.type_control = true;
+		else
+			ep->ep.caps.type_bulk = true;
+
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
+	}
+
+	dev->ep[0].reg_mode = NULL;
+	usb_ep_set_maxpacket_limit(&dev->ep[0].ep, MAX_EP0_SIZE);
+	list_del_init (&dev->ep[0].ep.ep_list);
+}
+
+static void udc_reset(struct goku_udc *dev)
+{
+	struct goku_udc_regs __iomem	*regs = dev->regs;
+
+	writel(0, &regs->power_detect);
+	writel(0, &regs->int_enable);
+	readl(&regs->int_enable);
+	dev->int_enable = 0;
+
+	/* deassert reset, leave USB D+ at hi-Z (no pullup)
+	 * don't let INT_PWRDETECT sequence begin
+	 */
+	udelay(250);
+	writel(PW_RESETB, &regs->power_detect);
+	readl(&regs->int_enable);
+}
+
+static void ep0_start(struct goku_udc *dev)
+{
+	struct goku_udc_regs __iomem	*regs = dev->regs;
+	unsigned			i;
+
+	VDBG(dev, "%s\n", __func__);
+
+	udc_reset(dev);
+	udc_reinit (dev);
+	//writel(MST_EOPB_ENA | MST_TIMEOUT_ENA, &regs->dma_master);
+
+	/* hw handles set_address, set_feature, get_status; maybe more */
+	writel(   G_REQMODE_SET_INTF | G_REQMODE_GET_INTF
+		| G_REQMODE_SET_CONF | G_REQMODE_GET_CONF
+		| G_REQMODE_GET_DESC
+		| G_REQMODE_CLEAR_FEAT
+		, &regs->reqmode);
+
+	for (i = 0; i < 4; i++)
+		dev->ep[i].irqs = 0;
+
+	/* can't modify descriptors after writing UsbReady */
+	for (i = 0; i < DESC_LEN; i++)
+		writel(0, &regs->descriptors[i]);
+	writel(0, &regs->UsbReady);
+
+	/* expect ep0 requests when the host drops reset */
+	writel(PW_RESETB | PW_PULLUP, &regs->power_detect);
+	dev->int_enable = INT_DEVWIDE | INT_EP0;
+	writel(dev->int_enable, &dev->regs->int_enable);
+	readl(&regs->int_enable);
+	dev->gadget.speed = USB_SPEED_FULL;
+	dev->ep0state = EP0_IDLE;
+}
+
+static void udc_enable(struct goku_udc *dev)
+{
+	/* start enumeration now, or after power detect irq */
+	if (readl(&dev->regs->power_detect) & PW_DETECT)
+		ep0_start(dev);
+	else {
+		DBG(dev, "%s\n", __func__);
+		dev->int_enable = INT_PWRDETECT;
+		writel(dev->int_enable, &dev->regs->int_enable);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* keeping it simple:
+ * - one bus driver, initted first;
+ * - one function driver, initted second
+ */
+
+/* when a driver is successfully registered, it will receive
+ * control requests including set_configuration(), which enables
+ * non-control requests.  then usb traffic follows until a
+ * disconnect is reported.  then a host may connect again, or
+ * the driver might get unbound.
+ */
+static int goku_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct goku_udc	*dev = to_goku_udc(g);
+
+	/* hook up the driver */
+	dev->driver = driver;
+
+	/*
+	 * then enable host detection and ep0; and we're ready
+	 * for set_configuration as well as eventual disconnect.
+	 */
+	udc_enable(dev);
+
+	return 0;
+}
+
+static void stop_activity(struct goku_udc *dev)
+{
+	unsigned	i;
+
+	DBG (dev, "%s\n", __func__);
+
+	/* disconnect gadget driver after quiesceing hw and the driver */
+	udc_reset (dev);
+	for (i = 0; i < 4; i++)
+		nuke(&dev->ep [i], -ESHUTDOWN);
+
+	if (dev->driver)
+		udc_enable(dev);
+}
+
+static int goku_udc_stop(struct usb_gadget *g)
+{
+	struct goku_udc	*dev = to_goku_udc(g);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	dev->driver = NULL;
+	stop_activity(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void ep0_setup(struct goku_udc *dev)
+{
+	struct goku_udc_regs __iomem	*regs = dev->regs;
+	struct usb_ctrlrequest		ctrl;
+	int				tmp;
+
+	/* read SETUP packet and enter DATA stage */
+	ctrl.bRequestType = readl(&regs->bRequestType);
+	ctrl.bRequest = readl(&regs->bRequest);
+	ctrl.wValue  = cpu_to_le16((readl(&regs->wValueH)  << 8)
+					| readl(&regs->wValueL));
+	ctrl.wIndex  = cpu_to_le16((readl(&regs->wIndexH)  << 8)
+					| readl(&regs->wIndexL));
+	ctrl.wLength = cpu_to_le16((readl(&regs->wLengthH) << 8)
+					| readl(&regs->wLengthL));
+	writel(0, &regs->SetupRecv);
+
+	nuke(&dev->ep[0], 0);
+	dev->ep[0].stopped = 0;
+	if (likely(ctrl.bRequestType & USB_DIR_IN)) {
+		dev->ep[0].is_in = 1;
+		dev->ep0state = EP0_IN;
+		/* detect early status stages */
+		writel(ICONTROL_STATUSNAK, &dev->regs->IntControl);
+	} else {
+		dev->ep[0].is_in = 0;
+		dev->ep0state = EP0_OUT;
+
+		/* NOTE:  CLEAR_FEATURE is done in software so that we can
+		 * synchronize transfer restarts after bulk IN stalls.  data
+		 * won't even enter the fifo until the halt is cleared.
+		 */
+		switch (ctrl.bRequest) {
+		case USB_REQ_CLEAR_FEATURE:
+			switch (ctrl.bRequestType) {
+			case USB_RECIP_ENDPOINT:
+				tmp = le16_to_cpu(ctrl.wIndex) & 0x0f;
+				/* active endpoint */
+				if (tmp > 3 ||
+				    (!dev->ep[tmp].ep.desc && tmp != 0))
+					goto stall;
+				if (ctrl.wIndex & cpu_to_le16(
+						USB_DIR_IN)) {
+					if (!dev->ep[tmp].is_in)
+						goto stall;
+				} else {
+					if (dev->ep[tmp].is_in)
+						goto stall;
+				}
+				if (ctrl.wValue != cpu_to_le16(
+						USB_ENDPOINT_HALT))
+					goto stall;
+				if (tmp)
+					goku_clear_halt(&dev->ep[tmp]);
+succeed:
+				/* start ep0out status stage */
+				writel(~(1<<0), &regs->EOP);
+				dev->ep[0].stopped = 1;
+				dev->ep0state = EP0_STATUS;
+				return;
+			case USB_RECIP_DEVICE:
+				/* device remote wakeup: always clear */
+				if (ctrl.wValue != cpu_to_le16(1))
+					goto stall;
+				VDBG(dev, "clear dev remote wakeup\n");
+				goto succeed;
+			case USB_RECIP_INTERFACE:
+				goto stall;
+			default:		/* pass to gadget driver */
+				break;
+			}
+			break;
+		default:
+			break;
+		}
+	}
+
+#ifdef USB_TRACE
+	VDBG(dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+		ctrl.bRequestType, ctrl.bRequest,
+		le16_to_cpu(ctrl.wValue), le16_to_cpu(ctrl.wIndex),
+		le16_to_cpu(ctrl.wLength));
+#endif
+
+	/* hw wants to know when we're configured (or not) */
+	dev->req_config = (ctrl.bRequest == USB_REQ_SET_CONFIGURATION
+				&& ctrl.bRequestType == USB_RECIP_DEVICE);
+	if (unlikely(dev->req_config))
+		dev->configured = (ctrl.wValue != cpu_to_le16(0));
+
+	/* delegate everything to the gadget driver.
+	 * it may respond after this irq handler returns.
+	 */
+	spin_unlock (&dev->lock);
+	tmp = dev->driver->setup(&dev->gadget, &ctrl);
+	spin_lock (&dev->lock);
+	if (unlikely(tmp < 0)) {
+stall:
+#ifdef USB_TRACE
+		VDBG(dev, "req %02x.%02x protocol STALL; err %d\n",
+				ctrl.bRequestType, ctrl.bRequest, tmp);
+#endif
+		command(regs, COMMAND_STALL, 0);
+		dev->ep[0].stopped = 1;
+		dev->ep0state = EP0_STALL;
+	}
+
+	/* expect at least one data or status stage irq */
+}
+
+#define ACK(irqbit) { \
+		stat &= ~irqbit; \
+		writel(~irqbit, &regs->int_status); \
+		handled = 1; \
+		}
+
+static irqreturn_t goku_irq(int irq, void *_dev)
+{
+	struct goku_udc			*dev = _dev;
+	struct goku_udc_regs __iomem	*regs = dev->regs;
+	struct goku_ep			*ep;
+	u32				stat, handled = 0;
+	unsigned			i, rescans = 5;
+
+	spin_lock(&dev->lock);
+
+rescan:
+	stat = readl(&regs->int_status) & dev->int_enable;
+        if (!stat)
+		goto done;
+	dev->irqs++;
+
+	/* device-wide irqs */
+	if (unlikely(stat & INT_DEVWIDE)) {
+		if (stat & INT_SYSERROR) {
+			ERROR(dev, "system error\n");
+			stop_activity(dev);
+			stat = 0;
+			handled = 1;
+			// FIXME have a neater way to prevent re-enumeration
+			dev->driver = NULL;
+			goto done;
+		}
+		if (stat & INT_PWRDETECT) {
+			writel(~stat, &regs->int_status);
+			if (readl(&dev->regs->power_detect) & PW_DETECT) {
+				VDBG(dev, "connect\n");
+				ep0_start(dev);
+			} else {
+				DBG(dev, "disconnect\n");
+				if (dev->gadget.speed == USB_SPEED_FULL)
+					stop_activity(dev);
+				dev->ep0state = EP0_DISCONNECT;
+				dev->int_enable = INT_DEVWIDE;
+				writel(dev->int_enable, &dev->regs->int_enable);
+			}
+			stat = 0;
+			handled = 1;
+			goto done;
+		}
+		if (stat & INT_SUSPEND) {
+			ACK(INT_SUSPEND);
+			if (readl(&regs->ep_status[0]) & EPxSTATUS_SUSPEND) {
+				switch (dev->ep0state) {
+				case EP0_DISCONNECT:
+				case EP0_SUSPEND:
+					goto pm_next;
+				default:
+					break;
+				}
+				DBG(dev, "USB suspend\n");
+				dev->ep0state = EP0_SUSPEND;
+				if (dev->gadget.speed != USB_SPEED_UNKNOWN
+						&& dev->driver
+						&& dev->driver->suspend) {
+					spin_unlock(&dev->lock);
+					dev->driver->suspend(&dev->gadget);
+					spin_lock(&dev->lock);
+				}
+			} else {
+				if (dev->ep0state != EP0_SUSPEND) {
+					DBG(dev, "bogus USB resume %d\n",
+						dev->ep0state);
+					goto pm_next;
+				}
+				DBG(dev, "USB resume\n");
+				dev->ep0state = EP0_IDLE;
+				if (dev->gadget.speed != USB_SPEED_UNKNOWN
+						&& dev->driver
+						&& dev->driver->resume) {
+					spin_unlock(&dev->lock);
+					dev->driver->resume(&dev->gadget);
+					spin_lock(&dev->lock);
+				}
+			}
+		}
+pm_next:
+		if (stat & INT_USBRESET) {		/* hub reset done */
+			ACK(INT_USBRESET);
+			INFO(dev, "USB reset done, gadget %s\n",
+				dev->driver->driver.name);
+		}
+		// and INT_ERR on some endpoint's crc/bitstuff/... problem
+	}
+
+	/* progress ep0 setup, data, or status stages.
+	 * no transition {EP0_STATUS, EP0_STALL} --> EP0_IDLE; saves irqs
+	 */
+	if (stat & INT_SETUP) {
+		ACK(INT_SETUP);
+		dev->ep[0].irqs++;
+		ep0_setup(dev);
+	}
+        if (stat & INT_STATUSNAK) {
+		ACK(INT_STATUSNAK|INT_ENDPOINT0);
+		if (dev->ep0state == EP0_IN) {
+			ep = &dev->ep[0];
+			ep->irqs++;
+			nuke(ep, 0);
+			writel(~(1<<0), &regs->EOP);
+			dev->ep0state = EP0_STATUS;
+		}
+	}
+        if (stat & INT_ENDPOINT0) {
+		ACK(INT_ENDPOINT0);
+		ep = &dev->ep[0];
+		ep->irqs++;
+		pio_advance(ep);
+        }
+
+	/* dma completion */
+        if (stat & INT_MSTRDEND) {	/* IN */
+		ACK(INT_MSTRDEND);
+		ep = &dev->ep[UDC_MSTRD_ENDPOINT];
+		ep->irqs++;
+		dma_advance(dev, ep);
+        }
+        if (stat & INT_MSTWREND) {	/* OUT */
+		ACK(INT_MSTWREND);
+		ep = &dev->ep[UDC_MSTWR_ENDPOINT];
+		ep->irqs++;
+		dma_advance(dev, ep);
+        }
+        if (stat & INT_MSTWRTMOUT) {	/* OUT */
+		ACK(INT_MSTWRTMOUT);
+		ep = &dev->ep[UDC_MSTWR_ENDPOINT];
+		ep->irqs++;
+		ERROR(dev, "%s write timeout ?\n", ep->ep.name);
+		// reset dma? then dma_advance()
+        }
+
+	/* pio */
+	for (i = 1; i < 4; i++) {
+		u32		tmp = INT_EPxDATASET(i);
+
+		if (!(stat & tmp))
+			continue;
+		ep = &dev->ep[i];
+		pio_advance(ep);
+		if (list_empty (&ep->queue))
+			pio_irq_disable(dev, regs, i);
+		stat &= ~tmp;
+		handled = 1;
+		ep->irqs++;
+	}
+
+	if (rescans--)
+		goto rescan;
+
+done:
+	(void)readl(&regs->int_enable);
+	spin_unlock(&dev->lock);
+	if (stat)
+		DBG(dev, "unhandled irq status: %05x (%05x, %05x)\n", stat,
+				readl(&regs->int_status), dev->int_enable);
+	return IRQ_RETVAL(handled);
+}
+
+#undef ACK
+
+/*-------------------------------------------------------------------------*/
+
+static void gadget_release(struct device *_dev)
+{
+	struct goku_udc	*dev = dev_get_drvdata(_dev);
+
+	kfree(dev);
+}
+
+/* tear down the binding between this driver and the pci device */
+
+static void goku_remove(struct pci_dev *pdev)
+{
+	struct goku_udc		*dev = pci_get_drvdata(pdev);
+
+	DBG(dev, "%s\n", __func__);
+
+	usb_del_gadget_udc(&dev->gadget);
+
+	BUG_ON(dev->driver);
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+	remove_proc_entry(proc_node_name, NULL);
+#endif
+	if (dev->regs)
+		udc_reset(dev);
+	if (dev->got_irq)
+		free_irq(pdev->irq, dev);
+	if (dev->regs)
+		iounmap(dev->regs);
+	if (dev->got_region)
+		release_mem_region(pci_resource_start (pdev, 0),
+				pci_resource_len (pdev, 0));
+	if (dev->enabled)
+		pci_disable_device(pdev);
+
+	dev->regs = NULL;
+
+	INFO(dev, "unbind\n");
+}
+
+/* wrap this driver around the specified pci device, but
+ * don't respond over USB until a gadget driver binds to us.
+ */
+
+static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct goku_udc		*dev = NULL;
+	unsigned long		resource, len;
+	void __iomem		*base = NULL;
+	int			retval;
+
+	if (!pdev->irq) {
+		printk(KERN_ERR "Check PCI %s IRQ setup!\n", pci_name(pdev));
+		retval = -ENODEV;
+		goto err;
+	}
+
+	/* alloc, and start init */
+	dev = kzalloc (sizeof *dev, GFP_KERNEL);
+	if (!dev) {
+		retval = -ENOMEM;
+		goto err;
+	}
+
+	pci_set_drvdata(pdev, dev);
+	spin_lock_init(&dev->lock);
+	dev->pdev = pdev;
+	dev->gadget.ops = &goku_ops;
+	dev->gadget.max_speed = USB_SPEED_FULL;
+
+	/* the "gadget" abstracts/virtualizes the controller */
+	dev->gadget.name = driver_name;
+
+	/* now all the pci goodies ... */
+	retval = pci_enable_device(pdev);
+	if (retval < 0) {
+		DBG(dev, "can't enable, %d\n", retval);
+		goto err;
+	}
+	dev->enabled = 1;
+
+	resource = pci_resource_start(pdev, 0);
+	len = pci_resource_len(pdev, 0);
+	if (!request_mem_region(resource, len, driver_name)) {
+		DBG(dev, "controller already in use\n");
+		retval = -EBUSY;
+		goto err;
+	}
+	dev->got_region = 1;
+
+	base = ioremap(resource, len);
+	if (base == NULL) {
+		DBG(dev, "can't map memory\n");
+		retval = -EFAULT;
+		goto err;
+	}
+	dev->regs = (struct goku_udc_regs __iomem *) base;
+
+	INFO(dev, "%s\n", driver_desc);
+	INFO(dev, "version: " DRIVER_VERSION " %s\n", dmastr());
+	INFO(dev, "irq %d, pci mem %p\n", pdev->irq, base);
+
+	/* init to known state, then setup irqs */
+	udc_reset(dev);
+	udc_reinit (dev);
+	if (request_irq(pdev->irq, goku_irq, IRQF_SHARED,
+			driver_name, dev) != 0) {
+		DBG(dev, "request interrupt %d failed\n", pdev->irq);
+		retval = -EBUSY;
+		goto err;
+	}
+	dev->got_irq = 1;
+	if (use_dma)
+		pci_set_master(pdev);
+
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+	proc_create_single_data(proc_node_name, 0, NULL, udc_proc_read, dev);
+#endif
+
+	retval = usb_add_gadget_udc_release(&pdev->dev, &dev->gadget,
+			gadget_release);
+	if (retval)
+		goto err;
+
+	return 0;
+
+err:
+	if (dev)
+		goku_remove (pdev);
+	/* gadget_release is not registered yet, kfree explicitly */
+	kfree(dev);
+	return retval;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static const struct pci_device_id pci_ids[] = { {
+	.class =	PCI_CLASS_SERIAL_USB_DEVICE,
+	.class_mask =	~0,
+	.vendor =	0x102f,		/* Toshiba */
+	.device =	0x0107,		/* this UDC */
+	.subvendor =	PCI_ANY_ID,
+	.subdevice =	PCI_ANY_ID,
+
+}, { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE (pci, pci_ids);
+
+static struct pci_driver goku_pci_driver = {
+	.name =		driver_name,
+	.id_table =	pci_ids,
+
+	.probe =	goku_probe,
+	.remove =	goku_remove,
+
+	/* FIXME add power management support */
+};
+
+module_pci_driver(goku_pci_driver);
diff --git a/drivers/usb/gadget/udc/goku_udc.h b/drivers/usb/gadget/udc/goku_udc.h
new file mode 100644
index 000000000..70023d401
--- /dev/null
+++ b/drivers/usb/gadget/udc/goku_udc.h
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Toshiba TC86C001 ("Goku-S") USB Device Controller driver
+ *
+ * Copyright (C) 2000-2002 Lineo
+ *      by Stuart Lynne, Tom Rushworth, and Bruce Balden
+ * Copyright (C) 2002 Toshiba Corporation
+ * Copyright (C) 2003 MontaVista Software (source@mvista.com)
+ */
+
+/*
+ * PCI BAR 0 points to these registers.
+ */
+struct goku_udc_regs {
+	/* irq management */
+	u32	int_status;		/* 0x000 */
+	u32	int_enable;
+#define INT_SUSPEND		0x00001		/* or resume */
+#define INT_USBRESET		0x00002
+#define INT_ENDPOINT0		0x00004
+#define INT_SETUP		0x00008
+#define INT_STATUS		0x00010
+#define INT_STATUSNAK		0x00020
+#define INT_EPxDATASET(n)	(0x00020 << (n))	/* 0 < n < 4 */
+#	define INT_EP1DATASET		0x00040
+#	define INT_EP2DATASET		0x00080
+#	define INT_EP3DATASET		0x00100
+#define INT_EPnNAK(n)		(0x00100 << (n))	/* 0 < n < 4 */
+#	define INT_EP1NAK		0x00200
+#	define INT_EP2NAK		0x00400
+#	define INT_EP3NAK		0x00800
+#define INT_SOF			0x01000
+#define INT_ERR			0x02000
+#define INT_MSTWRSET		0x04000
+#define INT_MSTWREND		0x08000
+#define INT_MSTWRTMOUT		0x10000
+#define INT_MSTRDEND		0x20000
+#define INT_SYSERROR		0x40000
+#define INT_PWRDETECT		0x80000
+
+#define	INT_DEVWIDE \
+	(INT_PWRDETECT|INT_SYSERROR/*|INT_ERR*/|INT_USBRESET|INT_SUSPEND)
+#define	INT_EP0 \
+	(INT_SETUP|INT_ENDPOINT0/*|INT_STATUS*/|INT_STATUSNAK)
+
+	u32	dma_master;
+#define MST_EOPB_DIS		0x0800
+#define MST_EOPB_ENA		0x0400
+#define MST_TIMEOUT_DIS		0x0200
+#define MST_TIMEOUT_ENA		0x0100
+#define MST_RD_EOPB		0x0080		/* write-only */
+#define MST_RD_RESET		0x0040
+#define MST_WR_RESET		0x0020
+#define MST_RD_ENA		0x0004		/* 1:start, 0:ignore */
+#define MST_WR_ENA		0x0002		/* 1:start, 0:ignore */
+#define MST_CONNECTION		0x0001		/* 0 for ep1out/ep2in */
+
+#define MST_R_BITS		(MST_EOPB_DIS|MST_EOPB_ENA \
+					|MST_RD_ENA|MST_RD_RESET)
+#define MST_W_BITS		(MST_TIMEOUT_DIS|MST_TIMEOUT_ENA \
+					|MST_WR_ENA|MST_WR_RESET)
+#define MST_RW_BITS		(MST_R_BITS|MST_W_BITS \
+					|MST_CONNECTION)
+
+/* these values assume (dma_master & MST_CONNECTION) == 0 */
+#define UDC_MSTWR_ENDPOINT        1
+#define UDC_MSTRD_ENDPOINT        2
+
+	/* dma master write */
+	u32	out_dma_start;
+	u32	out_dma_end;
+	u32	out_dma_current;
+
+	/* dma master read */
+	u32	in_dma_start;
+	u32	in_dma_end;
+	u32	in_dma_current;
+
+	u32	power_detect;
+#define PW_DETECT		0x04
+#define PW_RESETB		0x02
+#define PW_PULLUP		0x01
+
+	u8	_reserved0 [0x1d8];
+
+	/* endpoint registers */
+	u32	ep_fifo [4];		/* 0x200 */
+	u8	_reserved1 [0x10];
+	u32	ep_mode [4];		/* only 1-3 valid */
+	u8	_reserved2 [0x10];
+
+	u32	ep_status [4];
+#define EPxSTATUS_TOGGLE	0x40
+#define EPxSTATUS_SUSPEND	0x20
+#define EPxSTATUS_EP_MASK	(0x07<<2)
+#	define EPxSTATUS_EP_READY	(0<<2)
+#	define EPxSTATUS_EP_DATAIN	(1<<2)
+#	define EPxSTATUS_EP_FULL	(2<<2)
+#	define EPxSTATUS_EP_TX_ERR	(3<<2)
+#	define EPxSTATUS_EP_RX_ERR	(4<<2)
+#	define EPxSTATUS_EP_BUSY	(5<<2)
+#	define EPxSTATUS_EP_STALL	(6<<2)
+#	define EPxSTATUS_EP_INVALID	(7<<2)
+#define EPxSTATUS_FIFO_DISABLE	0x02
+#define EPxSTATUS_STAGE_ERROR	0x01
+
+	u8	_reserved3 [0x10];
+	u32	EPxSizeLA[4];
+#define PACKET_ACTIVE		(1<<7)
+#define DATASIZE		0x7f
+	u8	_reserved3a [0x10];
+	u32	EPxSizeLB[4];		/* only 1,2 valid */
+	u8	_reserved3b [0x10];
+	u32	EPxSizeHA[4];		/* only 1-3 valid */
+	u8	_reserved3c [0x10];
+	u32	EPxSizeHB[4];		/* only 1,2 valid */
+	u8	_reserved4[0x30];
+
+	/* SETUP packet contents */
+	u32	bRequestType;		/* 0x300 */
+	u32	bRequest;
+	u32	wValueL;
+	u32	wValueH;
+	u32	wIndexL;
+	u32	wIndexH;
+	u32	wLengthL;
+	u32	wLengthH;
+
+	/* command interaction/handshaking */
+	u32	SetupRecv;		/* 0x320 */
+	u32	CurrConfig;
+	u32	StdRequest;
+	u32	Request;
+	u32	DataSet;
+#define DATASET_A(epnum)	(1<<(2*(epnum)))
+#define DATASET_B(epnum)	(2<<(2*(epnum)))
+#define DATASET_AB(epnum)	(3<<(2*(epnum)))
+	u8	_reserved5[4];
+
+	u32	UsbState;
+#define USBSTATE_CONFIGURED	0x04
+#define USBSTATE_ADDRESSED	0x02
+#define USBSTATE_DEFAULT	0x01
+
+	u32	EOP;
+
+	u32	Command;		/* 0x340 */
+#define COMMAND_SETDATA0	2
+#define COMMAND_RESET		3
+#define COMMAND_STALL		4
+#define COMMAND_INVALID		5
+#define COMMAND_FIFO_DISABLE	7
+#define COMMAND_FIFO_ENABLE	8
+#define COMMAND_INIT_DESCRIPTOR	9
+#define COMMAND_FIFO_CLEAR	10	/* also stall */
+#define COMMAND_STALL_CLEAR	11
+#define COMMAND_EP(n)		((n) << 4)
+
+	u32	EPxSingle;
+	u8	_reserved6[4];
+	u32	EPxBCS;
+	u8	_reserved7[8];
+	u32	IntControl;
+#define ICONTROL_STATUSNAK	1
+	u8	_reserved8[4];
+
+	u32	reqmode;	// 0x360 standard request mode, low 8 bits
+#define G_REQMODE_SET_INTF	(1<<7)
+#define G_REQMODE_GET_INTF	(1<<6)
+#define G_REQMODE_SET_CONF	(1<<5)
+#define G_REQMODE_GET_CONF	(1<<4)
+#define G_REQMODE_GET_DESC	(1<<3)
+#define G_REQMODE_SET_FEAT	(1<<2)
+#define G_REQMODE_CLEAR_FEAT	(1<<1)
+#define G_REQMODE_GET_STATUS	(1<<0)
+
+	u32	ReqMode;
+	u8	_reserved9[0x18];
+	u32	PortStatus;		/* 0x380 */
+	u8	_reserved10[8];
+	u32	address;
+	u32	buff_test;
+	u8	_reserved11[4];
+	u32	UsbReady;
+	u8	_reserved12[4];
+	u32	SetDescStall;		/* 0x3a0 */
+	u8	_reserved13[0x45c];
+
+	/* hardware could handle limited GET_DESCRIPTOR duties */
+#define	DESC_LEN	0x80
+	u32	descriptors[DESC_LEN];	/* 0x800 */
+	u8	_reserved14[0x600];
+
+} __attribute__ ((packed));
+
+#define	MAX_FIFO_SIZE	64
+#define	MAX_EP0_SIZE	8		/* ep0 fifo is bigger, though */
+
+
+/*-------------------------------------------------------------------------*/
+
+/* DRIVER DATA STRUCTURES and UTILITIES */
+
+struct goku_ep {
+	struct usb_ep				ep;
+	struct goku_udc				*dev;
+	unsigned long				irqs;
+
+	unsigned				num:8,
+						dma:1,
+						is_in:1,
+						stopped:1;
+
+	/* analogous to a host-side qh */
+	struct list_head			queue;
+
+	u32 __iomem				*reg_fifo;
+	u32 __iomem				*reg_mode;
+	u32 __iomem				*reg_status;
+};
+
+struct goku_request {
+	struct usb_request		req;
+	struct list_head		queue;
+
+	unsigned			mapped:1;
+};
+
+enum ep0state {
+	EP0_DISCONNECT,		/* no host */
+	EP0_IDLE,		/* between STATUS ack and SETUP report */
+	EP0_IN, EP0_OUT,	/* data stage */
+	EP0_STATUS,		/* status stage */
+	EP0_STALL,		/* data or status stages */
+	EP0_SUSPEND,		/* usb suspend */
+};
+
+struct goku_udc {
+	/* each pci device provides one gadget, several endpoints */
+	struct usb_gadget		gadget;
+	spinlock_t			lock;
+	struct goku_ep			ep[4];
+	struct usb_gadget_driver	*driver;
+
+	enum ep0state			ep0state;
+	unsigned			got_irq:1,
+					got_region:1,
+					req_config:1,
+					configured:1,
+					enabled:1;
+
+	/* pci state used to access those endpoints */
+	struct pci_dev			*pdev;
+	struct goku_udc_regs __iomem	*regs;
+	u32				int_enable;
+
+	/* statistics... */
+	unsigned long			irqs;
+};
+#define to_goku_udc(g)		(container_of((g), struct goku_udc, gadget))
+
+/*-------------------------------------------------------------------------*/
+
+#define xprintk(dev,level,fmt,args...) \
+	printk(level "%s %s: " fmt , driver_name , \
+			pci_name(dev->pdev) , ## args)
+
+#ifdef DEBUG
+#define DBG(dev,fmt,args...) \
+	xprintk(dev , KERN_DEBUG , fmt , ## args)
+#else
+#define DBG(dev,fmt,args...) \
+	do { } while (0)
+#endif /* DEBUG */
+
+#ifdef VERBOSE
+#define VDBG DBG
+#else
+#define VDBG(dev,fmt,args...) \
+	do { } while (0)
+#endif	/* VERBOSE */
+
+#define ERROR(dev,fmt,args...) \
+	xprintk(dev , KERN_ERR , fmt , ## args)
+#define WARNING(dev,fmt,args...) \
+	xprintk(dev , KERN_WARNING , fmt , ## args)
+#define INFO(dev,fmt,args...) \
+	xprintk(dev , KERN_INFO , fmt , ## args)
+
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
new file mode 100644
index 000000000..097625599
--- /dev/null
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -0,0 +1,2258 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * USB Peripheral Controller driver for Aeroflex Gaisler GRUSBDC.
+ *
+ * 2013 (c) Aeroflex Gaisler AB
+ *
+ * This driver supports GRUSBDC USB Device Controller cores available in the
+ * GRLIB VHDL IP core library.
+ *
+ * Full documentation of the GRUSBDC core can be found here:
+ * https://www.gaisler.com/products/grlib/grip.pdf
+ *
+ * Contributors:
+ * - Andreas Larsson <andreas@gaisler.com>
+ * - Marko Isomaki
+ */
+
+/*
+ * A GRUSBDC core can have up to 16 IN endpoints and 16 OUT endpoints each
+ * individually configurable to any of the four USB transfer types. This driver
+ * only supports cores in DMA mode.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+
+#include <asm/byteorder.h>
+
+#include "gr_udc.h"
+
+#define	DRIVER_NAME	"gr_udc"
+#define	DRIVER_DESC	"Aeroflex Gaisler GRUSBDC USB Peripheral Controller"
+
+static const char driver_name[] = DRIVER_NAME;
+
+#define gr_read32(x) (ioread32be((x)))
+#define gr_write32(x, v) (iowrite32be((v), (x)))
+
+/* USB speed and corresponding string calculated from status register value */
+#define GR_SPEED(status) \
+	((status & GR_STATUS_SP) ? USB_SPEED_FULL : USB_SPEED_HIGH)
+#define GR_SPEED_STR(status) usb_speed_string(GR_SPEED(status))
+
+/* Size of hardware buffer calculated from epctrl register value */
+#define GR_BUFFER_SIZE(epctrl)					      \
+	((((epctrl) & GR_EPCTRL_BUFSZ_MASK) >> GR_EPCTRL_BUFSZ_POS) * \
+	 GR_EPCTRL_BUFSZ_SCALER)
+
+/* ---------------------------------------------------------------------- */
+/* Debug printout functionality */
+
+static const char * const gr_modestring[] = {"control", "iso", "bulk", "int"};
+
+static const char *gr_ep0state_string(enum gr_ep0state state)
+{
+	static const char *const names[] = {
+		[GR_EP0_DISCONNECT] = "disconnect",
+		[GR_EP0_SETUP] = "setup",
+		[GR_EP0_IDATA] = "idata",
+		[GR_EP0_ODATA] = "odata",
+		[GR_EP0_ISTATUS] = "istatus",
+		[GR_EP0_OSTATUS] = "ostatus",
+		[GR_EP0_STALL] = "stall",
+		[GR_EP0_SUSPEND] = "suspend",
+	};
+
+	if (state < 0 || state >= ARRAY_SIZE(names))
+		return "UNKNOWN";
+
+	return names[state];
+}
+
+#ifdef VERBOSE_DEBUG
+
+static void gr_dbgprint_request(const char *str, struct gr_ep *ep,
+				struct gr_request *req)
+{
+	int buflen = ep->is_in ? req->req.length : req->req.actual;
+	int rowlen = 32;
+	int plen = min(rowlen, buflen);
+
+	dev_dbg(ep->dev->dev, "%s: 0x%p, %d bytes data%s:\n", str, req, buflen,
+		(buflen > plen ? " (truncated)" : ""));
+	print_hex_dump_debug("   ", DUMP_PREFIX_NONE,
+			     rowlen, 4, req->req.buf, plen, false);
+}
+
+static void gr_dbgprint_devreq(struct gr_udc *dev, u8 type, u8 request,
+			       u16 value, u16 index, u16 length)
+{
+	dev_vdbg(dev->dev, "REQ: %02x.%02x v%04x i%04x l%04x\n",
+		 type, request, value, index, length);
+}
+#else /* !VERBOSE_DEBUG */
+
+static void gr_dbgprint_request(const char *str, struct gr_ep *ep,
+				struct gr_request *req) {}
+
+static void gr_dbgprint_devreq(struct gr_udc *dev, u8 type, u8 request,
+			       u16 value, u16 index, u16 length) {}
+
+#endif /* VERBOSE_DEBUG */
+
+/* ---------------------------------------------------------------------- */
+/* Debugfs functionality */
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+
+static void gr_seq_ep_show(struct seq_file *seq, struct gr_ep *ep)
+{
+	u32 epctrl = gr_read32(&ep->regs->epctrl);
+	u32 epstat = gr_read32(&ep->regs->epstat);
+	int mode = (epctrl & GR_EPCTRL_TT_MASK) >> GR_EPCTRL_TT_POS;
+	struct gr_request *req;
+
+	seq_printf(seq, "%s:\n", ep->ep.name);
+	seq_printf(seq, "  mode = %s\n", gr_modestring[mode]);
+	seq_printf(seq, "  halted: %d\n", !!(epctrl & GR_EPCTRL_EH));
+	seq_printf(seq, "  disabled: %d\n", !!(epctrl & GR_EPCTRL_ED));
+	seq_printf(seq, "  valid: %d\n", !!(epctrl & GR_EPCTRL_EV));
+	seq_printf(seq, "  dma_start = %d\n", ep->dma_start);
+	seq_printf(seq, "  stopped = %d\n", ep->stopped);
+	seq_printf(seq, "  wedged = %d\n", ep->wedged);
+	seq_printf(seq, "  callback = %d\n", ep->callback);
+	seq_printf(seq, "  maxpacket = %d\n", ep->ep.maxpacket);
+	seq_printf(seq, "  maxpacket_limit = %d\n", ep->ep.maxpacket_limit);
+	seq_printf(seq, "  bytes_per_buffer = %d\n", ep->bytes_per_buffer);
+	if (mode == 1 || mode == 3)
+		seq_printf(seq, "  nt = %d\n",
+			   (epctrl & GR_EPCTRL_NT_MASK) >> GR_EPCTRL_NT_POS);
+
+	seq_printf(seq, "  Buffer 0: %s %s%d\n",
+		   epstat & GR_EPSTAT_B0 ? "valid" : "invalid",
+		   epstat & GR_EPSTAT_BS ? " " : "selected ",
+		   (epstat & GR_EPSTAT_B0CNT_MASK) >> GR_EPSTAT_B0CNT_POS);
+	seq_printf(seq, "  Buffer 1: %s %s%d\n",
+		   epstat & GR_EPSTAT_B1 ? "valid" : "invalid",
+		   epstat & GR_EPSTAT_BS ? "selected " : " ",
+		   (epstat & GR_EPSTAT_B1CNT_MASK) >> GR_EPSTAT_B1CNT_POS);
+
+	if (list_empty(&ep->queue)) {
+		seq_puts(seq, "  Queue: empty\n\n");
+		return;
+	}
+
+	seq_puts(seq, "  Queue:\n");
+	list_for_each_entry(req, &ep->queue, queue) {
+		struct gr_dma_desc *desc;
+		struct gr_dma_desc *next;
+
+		seq_printf(seq, "    0x%p: 0x%p %d %d\n", req,
+			   &req->req.buf, req->req.actual, req->req.length);
+
+		next = req->first_desc;
+		do {
+			desc = next;
+			next = desc->next_desc;
+			seq_printf(seq, "    %c 0x%p (0x%08x): 0x%05x 0x%08x\n",
+				   desc == req->curr_desc ? 'c' : ' ',
+				   desc, desc->paddr, desc->ctrl, desc->data);
+		} while (desc != req->last_desc);
+	}
+	seq_puts(seq, "\n");
+}
+
+static int gr_dfs_show(struct seq_file *seq, void *v)
+{
+	struct gr_udc *dev = seq->private;
+	u32 control = gr_read32(&dev->regs->control);
+	u32 status = gr_read32(&dev->regs->status);
+	struct gr_ep *ep;
+
+	seq_printf(seq, "usb state = %s\n",
+		   usb_state_string(dev->gadget.state));
+	seq_printf(seq, "address = %d\n",
+		   (control & GR_CONTROL_UA_MASK) >> GR_CONTROL_UA_POS);
+	seq_printf(seq, "speed = %s\n", GR_SPEED_STR(status));
+	seq_printf(seq, "ep0state = %s\n", gr_ep0state_string(dev->ep0state));
+	seq_printf(seq, "irq_enabled = %d\n", dev->irq_enabled);
+	seq_printf(seq, "remote_wakeup = %d\n", dev->remote_wakeup);
+	seq_printf(seq, "test_mode = %d\n", dev->test_mode);
+	seq_puts(seq, "\n");
+
+	list_for_each_entry(ep, &dev->ep_list, ep_list)
+		gr_seq_ep_show(seq, ep);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(gr_dfs);
+
+static void gr_dfs_create(struct gr_udc *dev)
+{
+	const char *name = "gr_udc_state";
+	struct dentry *root;
+
+	root = debugfs_create_dir(dev_name(dev->dev), usb_debug_root);
+	debugfs_create_file(name, 0444, root, dev, &gr_dfs_fops);
+}
+
+static void gr_dfs_delete(struct gr_udc *dev)
+{
+	debugfs_lookup_and_remove(dev_name(dev->dev), usb_debug_root);
+}
+
+#else /* !CONFIG_USB_GADGET_DEBUG_FS */
+
+static void gr_dfs_create(struct gr_udc *dev) {}
+static void gr_dfs_delete(struct gr_udc *dev) {}
+
+#endif /* CONFIG_USB_GADGET_DEBUG_FS */
+
+/* ---------------------------------------------------------------------- */
+/* DMA and request handling */
+
+/* Allocates a new struct gr_dma_desc, sets paddr and zeroes the rest */
+static struct gr_dma_desc *gr_alloc_dma_desc(struct gr_ep *ep, gfp_t gfp_flags)
+{
+	dma_addr_t paddr;
+	struct gr_dma_desc *dma_desc;
+
+	dma_desc = dma_pool_zalloc(ep->dev->desc_pool, gfp_flags, &paddr);
+	if (!dma_desc) {
+		dev_err(ep->dev->dev, "Could not allocate from DMA pool\n");
+		return NULL;
+	}
+
+	dma_desc->paddr = paddr;
+
+	return dma_desc;
+}
+
+static inline void gr_free_dma_desc(struct gr_udc *dev,
+				    struct gr_dma_desc *desc)
+{
+	dma_pool_free(dev->desc_pool, desc, (dma_addr_t)desc->paddr);
+}
+
+/* Frees the chain of struct gr_dma_desc for the given request */
+static void gr_free_dma_desc_chain(struct gr_udc *dev, struct gr_request *req)
+{
+	struct gr_dma_desc *desc;
+	struct gr_dma_desc *next;
+
+	next = req->first_desc;
+	if (!next)
+		return;
+
+	do {
+		desc = next;
+		next = desc->next_desc;
+		gr_free_dma_desc(dev, desc);
+	} while (desc != req->last_desc);
+
+	req->first_desc = NULL;
+	req->curr_desc = NULL;
+	req->last_desc = NULL;
+}
+
+static void gr_ep0_setup(struct gr_udc *dev, struct gr_request *req);
+
+/*
+ * Frees allocated resources and calls the appropriate completion function/setup
+ * package handler for a finished request.
+ *
+ * Must be called with dev->lock held and irqs disabled.
+ */
+static void gr_finish_request(struct gr_ep *ep, struct gr_request *req,
+			      int status)
+	__releases(&dev->lock)
+	__acquires(&dev->lock)
+{
+	struct gr_udc *dev;
+
+	list_del_init(&req->queue);
+
+	if (likely(req->req.status == -EINPROGRESS))
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	dev = ep->dev;
+	usb_gadget_unmap_request(&dev->gadget, &req->req, ep->is_in);
+	gr_free_dma_desc_chain(dev, req);
+
+	if (ep->is_in) { /* For OUT, req->req.actual gets updated bit by bit */
+		req->req.actual = req->req.length;
+	} else if (req->oddlen && req->req.actual > req->evenlen) {
+		/*
+		 * Copy to user buffer in this case where length was not evenly
+		 * divisible by ep->ep.maxpacket and the last descriptor was
+		 * actually used.
+		 */
+		char *buftail = ((char *)req->req.buf + req->evenlen);
+
+		memcpy(buftail, ep->tailbuf, req->oddlen);
+
+		if (req->req.actual > req->req.length) {
+			/* We got more data than was requested */
+			dev_dbg(ep->dev->dev, "Overflow for ep %s\n",
+				ep->ep.name);
+			gr_dbgprint_request("OVFL", ep, req);
+			req->req.status = -EOVERFLOW;
+		}
+	}
+
+	if (!status) {
+		if (ep->is_in)
+			gr_dbgprint_request("SENT", ep, req);
+		else
+			gr_dbgprint_request("RECV", ep, req);
+	}
+
+	/* Prevent changes to ep->queue during callback */
+	ep->callback = 1;
+	if (req == dev->ep0reqo && !status) {
+		if (req->setup)
+			gr_ep0_setup(dev, req);
+		else
+			dev_err(dev->dev,
+				"Unexpected non setup packet on ep0in\n");
+	} else if (req->req.complete) {
+		spin_unlock(&dev->lock);
+
+		usb_gadget_giveback_request(&ep->ep, &req->req);
+
+		spin_lock(&dev->lock);
+	}
+	ep->callback = 0;
+}
+
+static struct usb_request *gr_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct gr_request *req;
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+/*
+ * Starts DMA for endpoint ep if there are requests in the queue.
+ *
+ * Must be called with dev->lock held and with !ep->stopped.
+ */
+static void gr_start_dma(struct gr_ep *ep)
+{
+	struct gr_request *req;
+	u32 dmactrl;
+
+	if (list_empty(&ep->queue)) {
+		ep->dma_start = 0;
+		return;
+	}
+
+	req = list_first_entry(&ep->queue, struct gr_request, queue);
+
+	/* A descriptor should already have been allocated */
+	BUG_ON(!req->curr_desc);
+
+	/*
+	 * The DMA controller can not handle smaller OUT buffers than
+	 * ep->ep.maxpacket. It could lead to buffer overruns if an unexpectedly
+	 * long packet are received. Therefore an internal bounce buffer gets
+	 * used when such a request gets enabled.
+	 */
+	if (!ep->is_in && req->oddlen)
+		req->last_desc->data = ep->tailbuf_paddr;
+
+	wmb(); /* Make sure all is settled before handing it over to DMA */
+
+	/* Set the descriptor pointer in the hardware */
+	gr_write32(&ep->regs->dmaaddr, req->curr_desc->paddr);
+
+	/* Announce available descriptors */
+	dmactrl = gr_read32(&ep->regs->dmactrl);
+	gr_write32(&ep->regs->dmactrl, dmactrl | GR_DMACTRL_DA);
+
+	ep->dma_start = 1;
+}
+
+/*
+ * Finishes the first request in the ep's queue and, if available, starts the
+ * next request in queue.
+ *
+ * Must be called with dev->lock held, irqs disabled and with !ep->stopped.
+ */
+static void gr_dma_advance(struct gr_ep *ep, int status)
+{
+	struct gr_request *req;
+
+	req = list_first_entry(&ep->queue, struct gr_request, queue);
+	gr_finish_request(ep, req, status);
+	gr_start_dma(ep); /* Regardless of ep->dma_start */
+}
+
+/*
+ * Abort DMA for an endpoint. Sets the abort DMA bit which causes an ongoing DMA
+ * transfer to be canceled and clears GR_DMACTRL_DA.
+ *
+ * Must be called with dev->lock held.
+ */
+static void gr_abort_dma(struct gr_ep *ep)
+{
+	u32 dmactrl;
+
+	dmactrl = gr_read32(&ep->regs->dmactrl);
+	gr_write32(&ep->regs->dmactrl, dmactrl | GR_DMACTRL_AD);
+}
+
+/*
+ * Allocates and sets up a struct gr_dma_desc and putting it on the descriptor
+ * chain.
+ *
+ * Size is not used for OUT endpoints. Hardware can not be instructed to handle
+ * smaller buffer than MAXPL in the OUT direction.
+ */
+static int gr_add_dma_desc(struct gr_ep *ep, struct gr_request *req,
+			   dma_addr_t data, unsigned size, gfp_t gfp_flags)
+{
+	struct gr_dma_desc *desc;
+
+	desc = gr_alloc_dma_desc(ep, gfp_flags);
+	if (!desc)
+		return -ENOMEM;
+
+	desc->data = data;
+	if (ep->is_in)
+		desc->ctrl =
+			(GR_DESC_IN_CTRL_LEN_MASK & size) | GR_DESC_IN_CTRL_EN;
+	else
+		desc->ctrl = GR_DESC_OUT_CTRL_IE;
+
+	if (!req->first_desc) {
+		req->first_desc = desc;
+		req->curr_desc = desc;
+	} else {
+		req->last_desc->next_desc = desc;
+		req->last_desc->next = desc->paddr;
+		req->last_desc->ctrl |= GR_DESC_OUT_CTRL_NX;
+	}
+	req->last_desc = desc;
+
+	return 0;
+}
+
+/*
+ * Sets up a chain of struct gr_dma_descriptors pointing to buffers that
+ * together covers req->req.length bytes of the buffer at DMA address
+ * req->req.dma for the OUT direction.
+ *
+ * The first descriptor in the chain is enabled, the rest disabled. The
+ * interrupt handler will later enable them one by one when needed so we can
+ * find out when the transfer is finished. For OUT endpoints, all descriptors
+ * therefore generate interrutps.
+ */
+static int gr_setup_out_desc_list(struct gr_ep *ep, struct gr_request *req,
+				  gfp_t gfp_flags)
+{
+	u16 bytes_left; /* Bytes left to provide descriptors for */
+	u16 bytes_used; /* Bytes accommodated for */
+	int ret = 0;
+
+	req->first_desc = NULL; /* Signals that no allocation is done yet */
+	bytes_left = req->req.length;
+	bytes_used = 0;
+	while (bytes_left > 0) {
+		dma_addr_t start = req->req.dma + bytes_used;
+		u16 size = min(bytes_left, ep->bytes_per_buffer);
+
+		if (size < ep->bytes_per_buffer) {
+			/* Prepare using bounce buffer */
+			req->evenlen = req->req.length - bytes_left;
+			req->oddlen = size;
+		}
+
+		ret = gr_add_dma_desc(ep, req, start, size, gfp_flags);
+		if (ret)
+			goto alloc_err;
+
+		bytes_left -= size;
+		bytes_used += size;
+	}
+
+	req->first_desc->ctrl |= GR_DESC_OUT_CTRL_EN;
+
+	return 0;
+
+alloc_err:
+	gr_free_dma_desc_chain(ep->dev, req);
+
+	return ret;
+}
+
+/*
+ * Sets up a chain of struct gr_dma_descriptors pointing to buffers that
+ * together covers req->req.length bytes of the buffer at DMA address
+ * req->req.dma for the IN direction.
+ *
+ * When more data is provided than the maximum payload size, the hardware splits
+ * this up into several payloads automatically. Moreover, ep->bytes_per_buffer
+ * is always set to a multiple of the maximum payload (restricted to the valid
+ * number of maximum payloads during high bandwidth isochronous or interrupt
+ * transfers)
+ *
+ * All descriptors are enabled from the beginning and we only generate an
+ * interrupt for the last one indicating that the entire request has been pushed
+ * to hardware.
+ */
+static int gr_setup_in_desc_list(struct gr_ep *ep, struct gr_request *req,
+				 gfp_t gfp_flags)
+{
+	u16 bytes_left; /* Bytes left in req to provide descriptors for */
+	u16 bytes_used; /* Bytes in req accommodated for */
+	int ret = 0;
+
+	req->first_desc = NULL; /* Signals that no allocation is done yet */
+	bytes_left = req->req.length;
+	bytes_used = 0;
+	do { /* Allow for zero length packets */
+		dma_addr_t start = req->req.dma + bytes_used;
+		u16 size = min(bytes_left, ep->bytes_per_buffer);
+
+		ret = gr_add_dma_desc(ep, req, start, size, gfp_flags);
+		if (ret)
+			goto alloc_err;
+
+		bytes_left -= size;
+		bytes_used += size;
+	} while (bytes_left > 0);
+
+	/*
+	 * Send an extra zero length packet to indicate that no more data is
+	 * available when req->req.zero is set and the data length is even
+	 * multiples of ep->ep.maxpacket.
+	 */
+	if (req->req.zero && (req->req.length % ep->ep.maxpacket == 0)) {
+		ret = gr_add_dma_desc(ep, req, 0, 0, gfp_flags);
+		if (ret)
+			goto alloc_err;
+	}
+
+	/*
+	 * For IN packets we only want to know when the last packet has been
+	 * transmitted (not just put into internal buffers).
+	 */
+	req->last_desc->ctrl |= GR_DESC_IN_CTRL_PI;
+
+	return 0;
+
+alloc_err:
+	gr_free_dma_desc_chain(ep->dev, req);
+
+	return ret;
+}
+
+/* Must be called with dev->lock held */
+static int gr_queue(struct gr_ep *ep, struct gr_request *req, gfp_t gfp_flags)
+{
+	struct gr_udc *dev = ep->dev;
+	int ret;
+
+	if (unlikely(!ep->ep.desc && ep->num != 0)) {
+		dev_err(dev->dev, "No ep descriptor for %s\n", ep->ep.name);
+		return -EINVAL;
+	}
+
+	if (unlikely(!req->req.buf || !list_empty(&req->queue))) {
+		dev_err(dev->dev,
+			"Invalid request for %s: buf=%p list_empty=%d\n",
+			ep->ep.name, req->req.buf, list_empty(&req->queue));
+		return -EINVAL;
+	}
+
+	if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
+		dev_err(dev->dev, "-ESHUTDOWN");
+		return -ESHUTDOWN;
+	}
+
+	/* Can't touch registers when suspended */
+	if (dev->ep0state == GR_EP0_SUSPEND) {
+		dev_err(dev->dev, "-EBUSY");
+		return -EBUSY;
+	}
+
+	/* Set up DMA mapping in case the caller didn't */
+	ret = usb_gadget_map_request(&dev->gadget, &req->req, ep->is_in);
+	if (ret) {
+		dev_err(dev->dev, "usb_gadget_map_request");
+		return ret;
+	}
+
+	if (ep->is_in)
+		ret = gr_setup_in_desc_list(ep, req, gfp_flags);
+	else
+		ret = gr_setup_out_desc_list(ep, req, gfp_flags);
+	if (ret)
+		return ret;
+
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+	list_add_tail(&req->queue, &ep->queue);
+
+	/* Start DMA if not started, otherwise interrupt handler handles it */
+	if (!ep->dma_start && likely(!ep->stopped))
+		gr_start_dma(ep);
+
+	return 0;
+}
+
+/*
+ * Queue a request from within the driver.
+ *
+ * Must be called with dev->lock held.
+ */
+static inline int gr_queue_int(struct gr_ep *ep, struct gr_request *req,
+			       gfp_t gfp_flags)
+{
+	if (ep->is_in)
+		gr_dbgprint_request("RESP", ep, req);
+
+	return gr_queue(ep, req, gfp_flags);
+}
+
+/* ---------------------------------------------------------------------- */
+/* General helper functions */
+
+/*
+ * Dequeue ALL requests.
+ *
+ * Must be called with dev->lock held and irqs disabled.
+ */
+static void gr_ep_nuke(struct gr_ep *ep)
+{
+	struct gr_request *req;
+
+	ep->stopped = 1;
+	ep->dma_start = 0;
+	gr_abort_dma(ep);
+
+	while (!list_empty(&ep->queue)) {
+		req = list_first_entry(&ep->queue, struct gr_request, queue);
+		gr_finish_request(ep, req, -ESHUTDOWN);
+	}
+}
+
+/*
+ * Reset the hardware state of this endpoint.
+ *
+ * Must be called with dev->lock held.
+ */
+static void gr_ep_reset(struct gr_ep *ep)
+{
+	gr_write32(&ep->regs->epctrl, 0);
+	gr_write32(&ep->regs->dmactrl, 0);
+
+	ep->ep.maxpacket = MAX_CTRL_PL_SIZE;
+	ep->ep.desc = NULL;
+	ep->stopped = 1;
+	ep->dma_start = 0;
+}
+
+/*
+ * Generate STALL on ep0in/out.
+ *
+ * Must be called with dev->lock held.
+ */
+static void gr_control_stall(struct gr_udc *dev)
+{
+	u32 epctrl;
+
+	epctrl = gr_read32(&dev->epo[0].regs->epctrl);
+	gr_write32(&dev->epo[0].regs->epctrl, epctrl | GR_EPCTRL_CS);
+	epctrl = gr_read32(&dev->epi[0].regs->epctrl);
+	gr_write32(&dev->epi[0].regs->epctrl, epctrl | GR_EPCTRL_CS);
+
+	dev->ep0state = GR_EP0_STALL;
+}
+
+/*
+ * Halts, halts and wedges, or clears halt for an endpoint.
+ *
+ * Must be called with dev->lock held.
+ */
+static int gr_ep_halt_wedge(struct gr_ep *ep, int halt, int wedge, int fromhost)
+{
+	u32 epctrl;
+	int retval = 0;
+
+	if (ep->num && !ep->ep.desc)
+		return -EINVAL;
+
+	if (ep->num && ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC)
+		return -EOPNOTSUPP;
+
+	/* Never actually halt ep0, and therefore never clear halt for ep0 */
+	if (!ep->num) {
+		if (halt && !fromhost) {
+			/* ep0 halt from gadget - generate protocol stall */
+			gr_control_stall(ep->dev);
+			dev_dbg(ep->dev->dev, "EP: stall ep0\n");
+			return 0;
+		}
+		return -EINVAL;
+	}
+
+	dev_dbg(ep->dev->dev, "EP: %s halt %s\n",
+		(halt ? (wedge ? "wedge" : "set") : "clear"), ep->ep.name);
+
+	epctrl = gr_read32(&ep->regs->epctrl);
+	if (halt) {
+		/* Set HALT */
+		gr_write32(&ep->regs->epctrl, epctrl | GR_EPCTRL_EH);
+		ep->stopped = 1;
+		if (wedge)
+			ep->wedged = 1;
+	} else {
+		gr_write32(&ep->regs->epctrl, epctrl & ~GR_EPCTRL_EH);
+		ep->stopped = 0;
+		ep->wedged = 0;
+
+		/* Things might have been queued up in the meantime */
+		if (!ep->dma_start)
+			gr_start_dma(ep);
+	}
+
+	return retval;
+}
+
+/* Must be called with dev->lock held */
+static inline void gr_set_ep0state(struct gr_udc *dev, enum gr_ep0state value)
+{
+	if (dev->ep0state != value)
+		dev_vdbg(dev->dev, "STATE:  ep0state=%s\n",
+			 gr_ep0state_string(value));
+	dev->ep0state = value;
+}
+
+/*
+ * Should only be called when endpoints can not generate interrupts.
+ *
+ * Must be called with dev->lock held.
+ */
+static void gr_disable_interrupts_and_pullup(struct gr_udc *dev)
+{
+	gr_write32(&dev->regs->control, 0);
+	wmb(); /* Make sure that we do not deny one of our interrupts */
+	dev->irq_enabled = 0;
+}
+
+/*
+ * Stop all device activity and disable data line pullup.
+ *
+ * Must be called with dev->lock held and irqs disabled.
+ */
+static void gr_stop_activity(struct gr_udc *dev)
+{
+	struct gr_ep *ep;
+
+	list_for_each_entry(ep, &dev->ep_list, ep_list)
+		gr_ep_nuke(ep);
+
+	gr_disable_interrupts_and_pullup(dev);
+
+	gr_set_ep0state(dev, GR_EP0_DISCONNECT);
+	usb_gadget_set_state(&dev->gadget, USB_STATE_NOTATTACHED);
+}
+
+/* ---------------------------------------------------------------------- */
+/* ep0 setup packet handling */
+
+static void gr_ep0_testmode_complete(struct usb_ep *_ep,
+				     struct usb_request *_req)
+{
+	struct gr_ep *ep;
+	struct gr_udc *dev;
+	u32 control;
+
+	ep = container_of(_ep, struct gr_ep, ep);
+	dev = ep->dev;
+
+	spin_lock(&dev->lock);
+
+	control = gr_read32(&dev->regs->control);
+	control |= GR_CONTROL_TM | (dev->test_mode << GR_CONTROL_TS_POS);
+	gr_write32(&dev->regs->control, control);
+
+	spin_unlock(&dev->lock);
+}
+
+static void gr_ep0_dummy_complete(struct usb_ep *_ep, struct usb_request *_req)
+{
+	/* Nothing needs to be done here */
+}
+
+/*
+ * Queue a response on ep0in.
+ *
+ * Must be called with dev->lock held.
+ */
+static int gr_ep0_respond(struct gr_udc *dev, u8 *buf, int length,
+			  void (*complete)(struct usb_ep *ep,
+					   struct usb_request *req))
+{
+	u8 *reqbuf = dev->ep0reqi->req.buf;
+	int status;
+	int i;
+
+	for (i = 0; i < length; i++)
+		reqbuf[i] = buf[i];
+	dev->ep0reqi->req.length = length;
+	dev->ep0reqi->req.complete = complete;
+
+	status = gr_queue_int(&dev->epi[0], dev->ep0reqi, GFP_ATOMIC);
+	if (status < 0)
+		dev_err(dev->dev,
+			"Could not queue ep0in setup response: %d\n", status);
+
+	return status;
+}
+
+/*
+ * Queue a 2 byte response on ep0in.
+ *
+ * Must be called with dev->lock held.
+ */
+static inline int gr_ep0_respond_u16(struct gr_udc *dev, u16 response)
+{
+	__le16 le_response = cpu_to_le16(response);
+
+	return gr_ep0_respond(dev, (u8 *)&le_response, 2,
+			      gr_ep0_dummy_complete);
+}
+
+/*
+ * Queue a ZLP response on ep0in.
+ *
+ * Must be called with dev->lock held.
+ */
+static inline int gr_ep0_respond_empty(struct gr_udc *dev)
+{
+	return gr_ep0_respond(dev, NULL, 0, gr_ep0_dummy_complete);
+}
+
+/*
+ * This is run when a SET_ADDRESS request is received. First writes
+ * the new address to the control register which is updated internally
+ * when the next IN packet is ACKED.
+ *
+ * Must be called with dev->lock held.
+ */
+static void gr_set_address(struct gr_udc *dev, u8 address)
+{
+	u32 control;
+
+	control = gr_read32(&dev->regs->control) & ~GR_CONTROL_UA_MASK;
+	control |= (address << GR_CONTROL_UA_POS) & GR_CONTROL_UA_MASK;
+	control |= GR_CONTROL_SU;
+	gr_write32(&dev->regs->control, control);
+}
+
+/*
+ * Returns negative for STALL, 0 for successful handling and positive for
+ * delegation.
+ *
+ * Must be called with dev->lock held.
+ */
+static int gr_device_request(struct gr_udc *dev, u8 type, u8 request,
+			     u16 value, u16 index)
+{
+	u16 response;
+	u8 test;
+
+	switch (request) {
+	case USB_REQ_SET_ADDRESS:
+		dev_dbg(dev->dev, "STATUS: address %d\n", value & 0xff);
+		gr_set_address(dev, value & 0xff);
+		if (value)
+			usb_gadget_set_state(&dev->gadget, USB_STATE_ADDRESS);
+		else
+			usb_gadget_set_state(&dev->gadget, USB_STATE_DEFAULT);
+		return gr_ep0_respond_empty(dev);
+
+	case USB_REQ_GET_STATUS:
+		/* Self powered | remote wakeup */
+		response = 0x0001 | (dev->remote_wakeup ? 0x0002 : 0);
+		return gr_ep0_respond_u16(dev, response);
+
+	case USB_REQ_SET_FEATURE:
+		switch (value) {
+		case USB_DEVICE_REMOTE_WAKEUP:
+			/* Allow remote wakeup */
+			dev->remote_wakeup = 1;
+			return gr_ep0_respond_empty(dev);
+
+		case USB_DEVICE_TEST_MODE:
+			/* The hardware does not support USB_TEST_FORCE_ENABLE */
+			test = index >> 8;
+			if (test >= USB_TEST_J && test <= USB_TEST_PACKET) {
+				dev->test_mode = test;
+				return gr_ep0_respond(dev, NULL, 0,
+						      gr_ep0_testmode_complete);
+			}
+		}
+		break;
+
+	case USB_REQ_CLEAR_FEATURE:
+		switch (value) {
+		case USB_DEVICE_REMOTE_WAKEUP:
+			/* Disallow remote wakeup */
+			dev->remote_wakeup = 0;
+			return gr_ep0_respond_empty(dev);
+		}
+		break;
+	}
+
+	return 1; /* Delegate the rest */
+}
+
+/*
+ * Returns negative for STALL, 0 for successful handling and positive for
+ * delegation.
+ *
+ * Must be called with dev->lock held.
+ */
+static int gr_interface_request(struct gr_udc *dev, u8 type, u8 request,
+				u16 value, u16 index)
+{
+	if (dev->gadget.state != USB_STATE_CONFIGURED)
+		return -1;
+
+	/*
+	 * Should return STALL for invalid interfaces, but udc driver does not
+	 * know anything about that. However, many gadget drivers do not handle
+	 * GET_STATUS so we need to take care of that.
+	 */
+
+	switch (request) {
+	case USB_REQ_GET_STATUS:
+		return gr_ep0_respond_u16(dev, 0x0000);
+
+	case USB_REQ_SET_FEATURE:
+	case USB_REQ_CLEAR_FEATURE:
+		/*
+		 * No possible valid standard requests. Still let gadget drivers
+		 * have a go at it.
+		 */
+		break;
+	}
+
+	return 1; /* Delegate the rest */
+}
+
+/*
+ * Returns negative for STALL, 0 for successful handling and positive for
+ * delegation.
+ *
+ * Must be called with dev->lock held.
+ */
+static int gr_endpoint_request(struct gr_udc *dev, u8 type, u8 request,
+			       u16 value, u16 index)
+{
+	struct gr_ep *ep;
+	int status;
+	int halted;
+	u8 epnum = index & USB_ENDPOINT_NUMBER_MASK;
+	u8 is_in = index & USB_ENDPOINT_DIR_MASK;
+
+	if ((is_in && epnum >= dev->nepi) || (!is_in && epnum >= dev->nepo))
+		return -1;
+
+	if (dev->gadget.state != USB_STATE_CONFIGURED && epnum != 0)
+		return -1;
+
+	ep = (is_in ? &dev->epi[epnum] : &dev->epo[epnum]);
+
+	switch (request) {
+	case USB_REQ_GET_STATUS:
+		halted = gr_read32(&ep->regs->epctrl) & GR_EPCTRL_EH;
+		return gr_ep0_respond_u16(dev, halted ? 0x0001 : 0);
+
+	case USB_REQ_SET_FEATURE:
+		switch (value) {
+		case USB_ENDPOINT_HALT:
+			status = gr_ep_halt_wedge(ep, 1, 0, 1);
+			if (status >= 0)
+				status = gr_ep0_respond_empty(dev);
+			return status;
+		}
+		break;
+
+	case USB_REQ_CLEAR_FEATURE:
+		switch (value) {
+		case USB_ENDPOINT_HALT:
+			if (ep->wedged)
+				return -1;
+			status = gr_ep_halt_wedge(ep, 0, 0, 1);
+			if (status >= 0)
+				status = gr_ep0_respond_empty(dev);
+			return status;
+		}
+		break;
+	}
+
+	return 1; /* Delegate the rest */
+}
+
+/* Must be called with dev->lock held */
+static void gr_ep0out_requeue(struct gr_udc *dev)
+{
+	int ret = gr_queue_int(&dev->epo[0], dev->ep0reqo, GFP_ATOMIC);
+
+	if (ret)
+		dev_err(dev->dev, "Could not queue ep0out setup request: %d\n",
+			ret);
+}
+
+/*
+ * The main function dealing with setup requests on ep0.
+ *
+ * Must be called with dev->lock held and irqs disabled
+ */
+static void gr_ep0_setup(struct gr_udc *dev, struct gr_request *req)
+	__releases(&dev->lock)
+	__acquires(&dev->lock)
+{
+	union {
+		struct usb_ctrlrequest ctrl;
+		u8 raw[8];
+		u32 word[2];
+	} u;
+	u8 type;
+	u8 request;
+	u16 value;
+	u16 index;
+	u16 length;
+	int i;
+	int status;
+
+	/* Restore from ep0 halt */
+	if (dev->ep0state == GR_EP0_STALL) {
+		gr_set_ep0state(dev, GR_EP0_SETUP);
+		if (!req->req.actual)
+			goto out;
+	}
+
+	if (dev->ep0state == GR_EP0_ISTATUS) {
+		gr_set_ep0state(dev, GR_EP0_SETUP);
+		if (req->req.actual > 0)
+			dev_dbg(dev->dev,
+				"Unexpected setup packet at state %s\n",
+				gr_ep0state_string(GR_EP0_ISTATUS));
+		else
+			goto out; /* Got expected ZLP */
+	} else if (dev->ep0state != GR_EP0_SETUP) {
+		dev_info(dev->dev,
+			 "Unexpected ep0out request at state %s - stalling\n",
+			 gr_ep0state_string(dev->ep0state));
+		gr_control_stall(dev);
+		gr_set_ep0state(dev, GR_EP0_SETUP);
+		goto out;
+	} else if (!req->req.actual) {
+		dev_dbg(dev->dev, "Unexpected ZLP at state %s\n",
+			gr_ep0state_string(dev->ep0state));
+		goto out;
+	}
+
+	/* Handle SETUP packet */
+	for (i = 0; i < req->req.actual; i++)
+		u.raw[i] = ((u8 *)req->req.buf)[i];
+
+	type = u.ctrl.bRequestType;
+	request = u.ctrl.bRequest;
+	value = le16_to_cpu(u.ctrl.wValue);
+	index = le16_to_cpu(u.ctrl.wIndex);
+	length = le16_to_cpu(u.ctrl.wLength);
+
+	gr_dbgprint_devreq(dev, type, request, value, index, length);
+
+	/* Check for data stage */
+	if (length) {
+		if (type & USB_DIR_IN)
+			gr_set_ep0state(dev, GR_EP0_IDATA);
+		else
+			gr_set_ep0state(dev, GR_EP0_ODATA);
+	}
+
+	status = 1; /* Positive status flags delegation */
+	if ((type & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (type & USB_RECIP_MASK) {
+		case USB_RECIP_DEVICE:
+			status = gr_device_request(dev, type, request,
+						   value, index);
+			break;
+		case USB_RECIP_ENDPOINT:
+			status =  gr_endpoint_request(dev, type, request,
+						      value, index);
+			break;
+		case USB_RECIP_INTERFACE:
+			status = gr_interface_request(dev, type, request,
+						      value, index);
+			break;
+		}
+	}
+
+	if (status > 0) {
+		spin_unlock(&dev->lock);
+
+		dev_vdbg(dev->dev, "DELEGATE\n");
+		status = dev->driver->setup(&dev->gadget, &u.ctrl);
+
+		spin_lock(&dev->lock);
+	}
+
+	/* Generate STALL on both ep0out and ep0in if requested */
+	if (unlikely(status < 0)) {
+		dev_vdbg(dev->dev, "STALL\n");
+		gr_control_stall(dev);
+	}
+
+	if ((type & USB_TYPE_MASK) == USB_TYPE_STANDARD &&
+	    request == USB_REQ_SET_CONFIGURATION) {
+		if (!value) {
+			dev_dbg(dev->dev, "STATUS: deconfigured\n");
+			usb_gadget_set_state(&dev->gadget, USB_STATE_ADDRESS);
+		} else if (status >= 0) {
+			/* Not configured unless gadget OK:s it */
+			dev_dbg(dev->dev, "STATUS: configured: %d\n", value);
+			usb_gadget_set_state(&dev->gadget,
+					     USB_STATE_CONFIGURED);
+		}
+	}
+
+	/* Get ready for next stage */
+	if (dev->ep0state == GR_EP0_ODATA)
+		gr_set_ep0state(dev, GR_EP0_OSTATUS);
+	else if (dev->ep0state == GR_EP0_IDATA)
+		gr_set_ep0state(dev, GR_EP0_ISTATUS);
+	else
+		gr_set_ep0state(dev, GR_EP0_SETUP);
+
+out:
+	gr_ep0out_requeue(dev);
+}
+
+/* ---------------------------------------------------------------------- */
+/* VBUS and USB reset handling */
+
+/* Must be called with dev->lock held and irqs disabled  */
+static void gr_vbus_connected(struct gr_udc *dev, u32 status)
+{
+	u32 control;
+
+	dev->gadget.speed = GR_SPEED(status);
+	usb_gadget_set_state(&dev->gadget, USB_STATE_POWERED);
+
+	/* Turn on full interrupts and pullup */
+	control = (GR_CONTROL_SI | GR_CONTROL_UI | GR_CONTROL_VI |
+		   GR_CONTROL_SP | GR_CONTROL_EP);
+	gr_write32(&dev->regs->control, control);
+}
+
+/* Must be called with dev->lock held */
+static void gr_enable_vbus_detect(struct gr_udc *dev)
+{
+	u32 status;
+
+	dev->irq_enabled = 1;
+	wmb(); /* Make sure we do not ignore an interrupt */
+	gr_write32(&dev->regs->control, GR_CONTROL_VI);
+
+	/* Take care of the case we are already plugged in at this point */
+	status = gr_read32(&dev->regs->status);
+	if (status & GR_STATUS_VB)
+		gr_vbus_connected(dev, status);
+}
+
+/* Must be called with dev->lock held and irqs disabled */
+static void gr_vbus_disconnected(struct gr_udc *dev)
+{
+	gr_stop_activity(dev);
+
+	/* Report disconnect */
+	if (dev->driver && dev->driver->disconnect) {
+		spin_unlock(&dev->lock);
+
+		dev->driver->disconnect(&dev->gadget);
+
+		spin_lock(&dev->lock);
+	}
+
+	gr_enable_vbus_detect(dev);
+}
+
+/* Must be called with dev->lock held and irqs disabled */
+static void gr_udc_usbreset(struct gr_udc *dev, u32 status)
+{
+	gr_set_address(dev, 0);
+	gr_set_ep0state(dev, GR_EP0_SETUP);
+	usb_gadget_set_state(&dev->gadget, USB_STATE_DEFAULT);
+	dev->gadget.speed = GR_SPEED(status);
+
+	gr_ep_nuke(&dev->epo[0]);
+	gr_ep_nuke(&dev->epi[0]);
+	dev->epo[0].stopped = 0;
+	dev->epi[0].stopped = 0;
+	gr_ep0out_requeue(dev);
+}
+
+/* ---------------------------------------------------------------------- */
+/* Irq handling */
+
+/*
+ * Handles interrupts from in endpoints. Returns whether something was handled.
+ *
+ * Must be called with dev->lock held, irqs disabled and with !ep->stopped.
+ */
+static int gr_handle_in_ep(struct gr_ep *ep)
+{
+	struct gr_request *req;
+
+	req = list_first_entry(&ep->queue, struct gr_request, queue);
+	if (!req->last_desc)
+		return 0;
+
+	if (READ_ONCE(req->last_desc->ctrl) & GR_DESC_IN_CTRL_EN)
+		return 0; /* Not put in hardware buffers yet */
+
+	if (gr_read32(&ep->regs->epstat) & (GR_EPSTAT_B1 | GR_EPSTAT_B0))
+		return 0; /* Not transmitted yet, still in hardware buffers */
+
+	/* Write complete */
+	gr_dma_advance(ep, 0);
+
+	return 1;
+}
+
+/*
+ * Handles interrupts from out endpoints. Returns whether something was handled.
+ *
+ * Must be called with dev->lock held, irqs disabled and with !ep->stopped.
+ */
+static int gr_handle_out_ep(struct gr_ep *ep)
+{
+	u32 ep_dmactrl;
+	u32 ctrl;
+	u16 len;
+	struct gr_request *req;
+	struct gr_udc *dev = ep->dev;
+
+	req = list_first_entry(&ep->queue, struct gr_request, queue);
+	if (!req->curr_desc)
+		return 0;
+
+	ctrl = READ_ONCE(req->curr_desc->ctrl);
+	if (ctrl & GR_DESC_OUT_CTRL_EN)
+		return 0; /* Not received yet */
+
+	/* Read complete */
+	len = ctrl & GR_DESC_OUT_CTRL_LEN_MASK;
+	req->req.actual += len;
+	if (ctrl & GR_DESC_OUT_CTRL_SE)
+		req->setup = 1;
+
+	if (len < ep->ep.maxpacket || req->req.actual >= req->req.length) {
+		/* Short packet or >= expected size - we are done */
+
+		if ((ep == &dev->epo[0]) && (dev->ep0state == GR_EP0_OSTATUS)) {
+			/*
+			 * Send a status stage ZLP to ack the DATA stage in the
+			 * OUT direction. This needs to be done before
+			 * gr_dma_advance as that can lead to a call to
+			 * ep0_setup that can change dev->ep0state.
+			 */
+			gr_ep0_respond_empty(dev);
+			gr_set_ep0state(dev, GR_EP0_SETUP);
+		}
+
+		gr_dma_advance(ep, 0);
+	} else {
+		/* Not done yet. Enable the next descriptor to receive more. */
+		req->curr_desc = req->curr_desc->next_desc;
+		req->curr_desc->ctrl |= GR_DESC_OUT_CTRL_EN;
+
+		ep_dmactrl = gr_read32(&ep->regs->dmactrl);
+		gr_write32(&ep->regs->dmactrl, ep_dmactrl | GR_DMACTRL_DA);
+	}
+
+	return 1;
+}
+
+/*
+ * Handle state changes. Returns whether something was handled.
+ *
+ * Must be called with dev->lock held and irqs disabled.
+ */
+static int gr_handle_state_changes(struct gr_udc *dev)
+{
+	u32 status = gr_read32(&dev->regs->status);
+	int handled = 0;
+	int powstate = !(dev->gadget.state == USB_STATE_NOTATTACHED ||
+			 dev->gadget.state == USB_STATE_ATTACHED);
+
+	/* VBUS valid detected */
+	if (!powstate && (status & GR_STATUS_VB)) {
+		dev_dbg(dev->dev, "STATUS: vbus valid detected\n");
+		gr_vbus_connected(dev, status);
+		handled = 1;
+	}
+
+	/* Disconnect */
+	if (powstate && !(status & GR_STATUS_VB)) {
+		dev_dbg(dev->dev, "STATUS: vbus invalid detected\n");
+		gr_vbus_disconnected(dev);
+		handled = 1;
+	}
+
+	/* USB reset detected */
+	if (status & GR_STATUS_UR) {
+		dev_dbg(dev->dev, "STATUS: USB reset - speed is %s\n",
+			GR_SPEED_STR(status));
+		gr_write32(&dev->regs->status, GR_STATUS_UR);
+		gr_udc_usbreset(dev, status);
+		handled = 1;
+	}
+
+	/* Speed change */
+	if (dev->gadget.speed != GR_SPEED(status)) {
+		dev_dbg(dev->dev, "STATUS: USB Speed change to %s\n",
+			GR_SPEED_STR(status));
+		dev->gadget.speed = GR_SPEED(status);
+		handled = 1;
+	}
+
+	/* Going into suspend */
+	if ((dev->ep0state != GR_EP0_SUSPEND) && !(status & GR_STATUS_SU)) {
+		dev_dbg(dev->dev, "STATUS: USB suspend\n");
+		gr_set_ep0state(dev, GR_EP0_SUSPEND);
+		dev->suspended_from = dev->gadget.state;
+		usb_gadget_set_state(&dev->gadget, USB_STATE_SUSPENDED);
+
+		if ((dev->gadget.speed != USB_SPEED_UNKNOWN) &&
+		    dev->driver && dev->driver->suspend) {
+			spin_unlock(&dev->lock);
+
+			dev->driver->suspend(&dev->gadget);
+
+			spin_lock(&dev->lock);
+		}
+		handled = 1;
+	}
+
+	/* Coming out of suspend */
+	if ((dev->ep0state == GR_EP0_SUSPEND) && (status & GR_STATUS_SU)) {
+		dev_dbg(dev->dev, "STATUS: USB resume\n");
+		if (dev->suspended_from == USB_STATE_POWERED)
+			gr_set_ep0state(dev, GR_EP0_DISCONNECT);
+		else
+			gr_set_ep0state(dev, GR_EP0_SETUP);
+		usb_gadget_set_state(&dev->gadget, dev->suspended_from);
+
+		if ((dev->gadget.speed != USB_SPEED_UNKNOWN) &&
+		    dev->driver && dev->driver->resume) {
+			spin_unlock(&dev->lock);
+
+			dev->driver->resume(&dev->gadget);
+
+			spin_lock(&dev->lock);
+		}
+		handled = 1;
+	}
+
+	return handled;
+}
+
+/* Non-interrupt context irq handler */
+static irqreturn_t gr_irq_handler(int irq, void *_dev)
+{
+	struct gr_udc *dev = _dev;
+	struct gr_ep *ep;
+	int handled = 0;
+	int i;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	if (!dev->irq_enabled)
+		goto out;
+
+	/*
+	 * Check IN ep interrupts. We check these before the OUT eps because
+	 * some gadgets reuse the request that might already be currently
+	 * outstanding and needs to be completed (mainly setup requests).
+	 */
+	for (i = 0; i < dev->nepi; i++) {
+		ep = &dev->epi[i];
+		if (!ep->stopped && !ep->callback && !list_empty(&ep->queue))
+			handled = gr_handle_in_ep(ep) || handled;
+	}
+
+	/* Check OUT ep interrupts */
+	for (i = 0; i < dev->nepo; i++) {
+		ep = &dev->epo[i];
+		if (!ep->stopped && !ep->callback && !list_empty(&ep->queue))
+			handled = gr_handle_out_ep(ep) || handled;
+	}
+
+	/* Check status interrupts */
+	handled = gr_handle_state_changes(dev) || handled;
+
+	/*
+	 * Check AMBA DMA errors. Only check if we didn't find anything else to
+	 * handle because this shouldn't happen if we did everything right.
+	 */
+	if (!handled) {
+		list_for_each_entry(ep, &dev->ep_list, ep_list) {
+			if (gr_read32(&ep->regs->dmactrl) & GR_DMACTRL_AE) {
+				dev_err(dev->dev,
+					"AMBA Error occurred for %s\n",
+					ep->ep.name);
+				handled = 1;
+			}
+		}
+	}
+
+out:
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+/* Interrupt context irq handler */
+static irqreturn_t gr_irq(int irq, void *_dev)
+{
+	struct gr_udc *dev = _dev;
+
+	if (!dev->irq_enabled)
+		return IRQ_NONE;
+
+	return IRQ_WAKE_THREAD;
+}
+
+/* ---------------------------------------------------------------------- */
+/* USB ep ops */
+
+/* Enable endpoint. Not for ep0in and ep0out that are handled separately. */
+static int gr_ep_enable(struct usb_ep *_ep,
+			const struct usb_endpoint_descriptor *desc)
+{
+	struct gr_udc *dev;
+	struct gr_ep *ep;
+	u8 mode;
+	u8 nt;
+	u16 max;
+	u16 buffer_size = 0;
+	u32 epctrl;
+
+	ep = container_of(_ep, struct gr_ep, ep);
+	if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT)
+		return -EINVAL;
+
+	dev = ep->dev;
+
+	/* 'ep0' IN and OUT are reserved */
+	if (ep == &dev->epo[0] || ep == &dev->epi[0])
+		return -EINVAL;
+
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	/* Make sure we are clear for enabling */
+	epctrl = gr_read32(&ep->regs->epctrl);
+	if (epctrl & GR_EPCTRL_EV)
+		return -EBUSY;
+
+	/* Check that directions match */
+	if (!ep->is_in != !usb_endpoint_dir_in(desc))
+		return -EINVAL;
+
+	/* Check ep num */
+	if ((!ep->is_in && ep->num >= dev->nepo) ||
+	    (ep->is_in && ep->num >= dev->nepi))
+		return -EINVAL;
+
+	if (usb_endpoint_xfer_control(desc)) {
+		mode = 0;
+	} else if (usb_endpoint_xfer_isoc(desc)) {
+		mode = 1;
+	} else if (usb_endpoint_xfer_bulk(desc)) {
+		mode = 2;
+	} else if (usb_endpoint_xfer_int(desc)) {
+		mode = 3;
+	} else {
+		dev_err(dev->dev, "Unknown transfer type for %s\n",
+			ep->ep.name);
+		return -EINVAL;
+	}
+
+	/*
+	 * Bits 10-0 set the max payload. 12-11 set the number of
+	 * additional transactions.
+	 */
+	max = usb_endpoint_maxp(desc);
+	nt = usb_endpoint_maxp_mult(desc) - 1;
+	buffer_size = GR_BUFFER_SIZE(epctrl);
+	if (nt && (mode == 0 || mode == 2)) {
+		dev_err(dev->dev,
+			"%s mode: multiple trans./microframe not valid\n",
+			(mode == 2 ? "Bulk" : "Control"));
+		return -EINVAL;
+	} else if (nt == 0x3) {
+		dev_err(dev->dev,
+			"Invalid value 0x3 for additional trans./microframe\n");
+		return -EINVAL;
+	} else if ((nt + 1) * max > buffer_size) {
+		dev_err(dev->dev, "Hw buffer size %d < max payload %d * %d\n",
+			buffer_size, (nt + 1), max);
+		return -EINVAL;
+	} else if (max == 0) {
+		dev_err(dev->dev, "Max payload cannot be set to 0\n");
+		return -EINVAL;
+	} else if (max > ep->ep.maxpacket_limit) {
+		dev_err(dev->dev, "Requested max payload %d > limit %d\n",
+			max, ep->ep.maxpacket_limit);
+		return -EINVAL;
+	}
+
+	spin_lock(&ep->dev->lock);
+
+	if (!ep->stopped) {
+		spin_unlock(&ep->dev->lock);
+		return -EBUSY;
+	}
+
+	ep->stopped = 0;
+	ep->wedged = 0;
+	ep->ep.desc = desc;
+	ep->ep.maxpacket = max;
+	ep->dma_start = 0;
+
+
+	if (nt) {
+		/*
+		 * Maximum possible size of all payloads in one microframe
+		 * regardless of direction when using high-bandwidth mode.
+		 */
+		ep->bytes_per_buffer = (nt + 1) * max;
+	} else if (ep->is_in) {
+		/*
+		 * The biggest multiple of maximum packet size that fits into
+		 * the buffer. The hardware will split up into many packets in
+		 * the IN direction.
+		 */
+		ep->bytes_per_buffer = (buffer_size / max) * max;
+	} else {
+		/*
+		 * Only single packets will be placed the buffers in the OUT
+		 * direction.
+		 */
+		ep->bytes_per_buffer = max;
+	}
+
+	epctrl = (max << GR_EPCTRL_MAXPL_POS)
+		| (nt << GR_EPCTRL_NT_POS)
+		| (mode << GR_EPCTRL_TT_POS)
+		| GR_EPCTRL_EV;
+	if (ep->is_in)
+		epctrl |= GR_EPCTRL_PI;
+	gr_write32(&ep->regs->epctrl, epctrl);
+
+	gr_write32(&ep->regs->dmactrl, GR_DMACTRL_IE | GR_DMACTRL_AI);
+
+	spin_unlock(&ep->dev->lock);
+
+	dev_dbg(ep->dev->dev, "EP: %s enabled - %s with %d bytes/buffer\n",
+		ep->ep.name, gr_modestring[mode], ep->bytes_per_buffer);
+	return 0;
+}
+
+/* Disable endpoint. Not for ep0in and ep0out that are handled separately. */
+static int gr_ep_disable(struct usb_ep *_ep)
+{
+	struct gr_ep *ep;
+	struct gr_udc *dev;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct gr_ep, ep);
+	if (!_ep || !ep->ep.desc)
+		return -ENODEV;
+
+	dev = ep->dev;
+
+	/* 'ep0' IN and OUT are reserved */
+	if (ep == &dev->epo[0] || ep == &dev->epi[0])
+		return -EINVAL;
+
+	if (dev->ep0state == GR_EP0_SUSPEND)
+		return -EBUSY;
+
+	dev_dbg(ep->dev->dev, "EP: disable %s\n", ep->ep.name);
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	gr_ep_nuke(ep);
+	gr_ep_reset(ep);
+	ep->ep.desc = NULL;
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+/*
+ * Frees a request, but not any DMA buffers associated with it
+ * (gr_finish_request should already have taken care of that).
+ */
+static void gr_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct gr_request *req;
+
+	if (!_ep || !_req)
+		return;
+	req = container_of(_req, struct gr_request, req);
+
+	/* Leads to memory leak */
+	WARN(!list_empty(&req->queue),
+	     "request not dequeued properly before freeing\n");
+
+	kfree(req);
+}
+
+/* Queue a request from the gadget */
+static int gr_queue_ext(struct usb_ep *_ep, struct usb_request *_req,
+			gfp_t gfp_flags)
+{
+	struct gr_ep *ep;
+	struct gr_request *req;
+	struct gr_udc *dev;
+	int ret;
+
+	if (unlikely(!_ep || !_req))
+		return -EINVAL;
+
+	ep = container_of(_ep, struct gr_ep, ep);
+	req = container_of(_req, struct gr_request, req);
+	dev = ep->dev;
+
+	spin_lock(&ep->dev->lock);
+
+	/*
+	 * The ep0 pointer in the gadget struct is used both for ep0in and
+	 * ep0out. In a data stage in the out direction ep0out needs to be used
+	 * instead of the default ep0in. Completion functions might use
+	 * driver_data, so that needs to be copied as well.
+	 */
+	if ((ep == &dev->epi[0]) && (dev->ep0state == GR_EP0_ODATA)) {
+		ep = &dev->epo[0];
+		ep->ep.driver_data = dev->epi[0].ep.driver_data;
+	}
+
+	if (ep->is_in)
+		gr_dbgprint_request("EXTERN", ep, req);
+
+	ret = gr_queue(ep, req, GFP_ATOMIC);
+
+	spin_unlock(&ep->dev->lock);
+
+	return ret;
+}
+
+/* Dequeue JUST ONE request */
+static int gr_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct gr_request *req = NULL, *iter;
+	struct gr_ep *ep;
+	struct gr_udc *dev;
+	int ret = 0;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct gr_ep, ep);
+	if (!_ep || !_req || (!ep->ep.desc && ep->num != 0))
+		return -EINVAL;
+	dev = ep->dev;
+	if (!dev->driver)
+		return -ESHUTDOWN;
+
+	/* We can't touch (DMA) registers when suspended */
+	if (dev->ep0state == GR_EP0_SUSPEND)
+		return -EBUSY;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* Make sure it's actually queued on this endpoint */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		req = iter;
+		break;
+	}
+	if (!req) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (list_first_entry(&ep->queue, struct gr_request, queue) == req) {
+		/* This request is currently being processed */
+		gr_abort_dma(ep);
+		if (ep->stopped)
+			gr_finish_request(ep, req, -ECONNRESET);
+		else
+			gr_dma_advance(ep, -ECONNRESET);
+	} else if (!list_empty(&req->queue)) {
+		/* Not being processed - gr_finish_request dequeues it */
+		gr_finish_request(ep, req, -ECONNRESET);
+	} else {
+		ret = -EOPNOTSUPP;
+	}
+
+out:
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return ret;
+}
+
+/* Helper for gr_set_halt and gr_set_wedge */
+static int gr_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge)
+{
+	int ret;
+	struct gr_ep *ep;
+
+	if (!_ep)
+		return -ENODEV;
+	ep = container_of(_ep, struct gr_ep, ep);
+
+	spin_lock(&ep->dev->lock);
+
+	/* Halting an IN endpoint should fail if queue is not empty */
+	if (halt && ep->is_in && !list_empty(&ep->queue)) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	ret = gr_ep_halt_wedge(ep, halt, wedge, 0);
+
+out:
+	spin_unlock(&ep->dev->lock);
+
+	return ret;
+}
+
+/* Halt endpoint */
+static int gr_set_halt(struct usb_ep *_ep, int halt)
+{
+	return gr_set_halt_wedge(_ep, halt, 0);
+}
+
+/* Halt and wedge endpoint */
+static int gr_set_wedge(struct usb_ep *_ep)
+{
+	return gr_set_halt_wedge(_ep, 1, 1);
+}
+
+/*
+ * Return the total number of bytes currently stored in the internal buffers of
+ * the endpoint.
+ */
+static int gr_fifo_status(struct usb_ep *_ep)
+{
+	struct gr_ep *ep;
+	u32 epstat;
+	u32 bytes = 0;
+
+	if (!_ep)
+		return -ENODEV;
+	ep = container_of(_ep, struct gr_ep, ep);
+
+	epstat = gr_read32(&ep->regs->epstat);
+
+	if (epstat & GR_EPSTAT_B0)
+		bytes += (epstat & GR_EPSTAT_B0CNT_MASK) >> GR_EPSTAT_B0CNT_POS;
+	if (epstat & GR_EPSTAT_B1)
+		bytes += (epstat & GR_EPSTAT_B1CNT_MASK) >> GR_EPSTAT_B1CNT_POS;
+
+	return bytes;
+}
+
+
+/* Empty data from internal buffers of an endpoint. */
+static void gr_fifo_flush(struct usb_ep *_ep)
+{
+	struct gr_ep *ep;
+	u32 epctrl;
+
+	if (!_ep)
+		return;
+	ep = container_of(_ep, struct gr_ep, ep);
+	dev_vdbg(ep->dev->dev, "EP: flush fifo %s\n", ep->ep.name);
+
+	spin_lock(&ep->dev->lock);
+
+	epctrl = gr_read32(&ep->regs->epctrl);
+	epctrl |= GR_EPCTRL_CB;
+	gr_write32(&ep->regs->epctrl, epctrl);
+
+	spin_unlock(&ep->dev->lock);
+}
+
+static const struct usb_ep_ops gr_ep_ops = {
+	.enable		= gr_ep_enable,
+	.disable	= gr_ep_disable,
+
+	.alloc_request	= gr_alloc_request,
+	.free_request	= gr_free_request,
+
+	.queue		= gr_queue_ext,
+	.dequeue	= gr_dequeue,
+
+	.set_halt	= gr_set_halt,
+	.set_wedge	= gr_set_wedge,
+	.fifo_status	= gr_fifo_status,
+	.fifo_flush	= gr_fifo_flush,
+};
+
+/* ---------------------------------------------------------------------- */
+/* USB Gadget ops */
+
+static int gr_get_frame(struct usb_gadget *_gadget)
+{
+	struct gr_udc *dev;
+
+	if (!_gadget)
+		return -ENODEV;
+	dev = container_of(_gadget, struct gr_udc, gadget);
+	return gr_read32(&dev->regs->status) & GR_STATUS_FN_MASK;
+}
+
+static int gr_wakeup(struct usb_gadget *_gadget)
+{
+	struct gr_udc *dev;
+
+	if (!_gadget)
+		return -ENODEV;
+	dev = container_of(_gadget, struct gr_udc, gadget);
+
+	/* Remote wakeup feature not enabled by host*/
+	if (!dev->remote_wakeup)
+		return -EINVAL;
+
+	spin_lock(&dev->lock);
+
+	gr_write32(&dev->regs->control,
+		   gr_read32(&dev->regs->control) | GR_CONTROL_RW);
+
+	spin_unlock(&dev->lock);
+
+	return 0;
+}
+
+static int gr_pullup(struct usb_gadget *_gadget, int is_on)
+{
+	struct gr_udc *dev;
+	u32 control;
+
+	if (!_gadget)
+		return -ENODEV;
+	dev = container_of(_gadget, struct gr_udc, gadget);
+
+	spin_lock(&dev->lock);
+
+	control = gr_read32(&dev->regs->control);
+	if (is_on)
+		control |= GR_CONTROL_EP;
+	else
+		control &= ~GR_CONTROL_EP;
+	gr_write32(&dev->regs->control, control);
+
+	spin_unlock(&dev->lock);
+
+	return 0;
+}
+
+static int gr_udc_start(struct usb_gadget *gadget,
+			struct usb_gadget_driver *driver)
+{
+	struct gr_udc *dev = to_gr_udc(gadget);
+
+	spin_lock(&dev->lock);
+
+	/* Hook up the driver */
+	dev->driver = driver;
+
+	/* Get ready for host detection */
+	gr_enable_vbus_detect(dev);
+
+	spin_unlock(&dev->lock);
+
+	return 0;
+}
+
+static int gr_udc_stop(struct usb_gadget *gadget)
+{
+	struct gr_udc *dev = to_gr_udc(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	dev->driver = NULL;
+	gr_stop_activity(dev);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops gr_ops = {
+	.get_frame	= gr_get_frame,
+	.wakeup         = gr_wakeup,
+	.pullup         = gr_pullup,
+	.udc_start	= gr_udc_start,
+	.udc_stop	= gr_udc_stop,
+	/* Other operations not supported */
+};
+
+/* ---------------------------------------------------------------------- */
+/* Module probe, removal and of-matching */
+
+static const char * const onames[] = {
+	"ep0out", "ep1out", "ep2out", "ep3out", "ep4out", "ep5out",
+	"ep6out", "ep7out", "ep8out", "ep9out", "ep10out", "ep11out",
+	"ep12out", "ep13out", "ep14out", "ep15out"
+};
+
+static const char * const inames[] = {
+	"ep0in", "ep1in", "ep2in", "ep3in", "ep4in", "ep5in",
+	"ep6in", "ep7in", "ep8in", "ep9in", "ep10in", "ep11in",
+	"ep12in", "ep13in", "ep14in", "ep15in"
+};
+
+/* Must be called with dev->lock held */
+static int gr_ep_init(struct gr_udc *dev, int num, int is_in, u32 maxplimit)
+{
+	struct gr_ep *ep;
+	struct gr_request *req;
+	struct usb_request *_req;
+	void *buf;
+
+	if (is_in) {
+		ep = &dev->epi[num];
+		ep->ep.name = inames[num];
+		ep->regs = &dev->regs->epi[num];
+	} else {
+		ep = &dev->epo[num];
+		ep->ep.name = onames[num];
+		ep->regs = &dev->regs->epo[num];
+	}
+
+	gr_ep_reset(ep);
+	ep->num = num;
+	ep->is_in = is_in;
+	ep->dev = dev;
+	ep->ep.ops = &gr_ep_ops;
+	INIT_LIST_HEAD(&ep->queue);
+
+	if (num == 0) {
+		_req = gr_alloc_request(&ep->ep, GFP_ATOMIC);
+		if (!_req)
+			return -ENOMEM;
+
+		buf = devm_kzalloc(dev->dev, PAGE_SIZE, GFP_DMA | GFP_ATOMIC);
+		if (!buf) {
+			gr_free_request(&ep->ep, _req);
+			return -ENOMEM;
+		}
+
+		req = container_of(_req, struct gr_request, req);
+		req->req.buf = buf;
+		req->req.length = MAX_CTRL_PL_SIZE;
+
+		if (is_in)
+			dev->ep0reqi = req; /* Complete gets set as used */
+		else
+			dev->ep0reqo = req; /* Completion treated separately */
+
+		usb_ep_set_maxpacket_limit(&ep->ep, MAX_CTRL_PL_SIZE);
+		ep->bytes_per_buffer = MAX_CTRL_PL_SIZE;
+
+		ep->ep.caps.type_control = true;
+	} else {
+		usb_ep_set_maxpacket_limit(&ep->ep, (u16)maxplimit);
+		list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
+
+		ep->ep.caps.type_iso = true;
+		ep->ep.caps.type_bulk = true;
+		ep->ep.caps.type_int = true;
+	}
+	list_add_tail(&ep->ep_list, &dev->ep_list);
+
+	if (is_in)
+		ep->ep.caps.dir_in = true;
+	else
+		ep->ep.caps.dir_out = true;
+
+	ep->tailbuf = dma_alloc_coherent(dev->dev, ep->ep.maxpacket_limit,
+					 &ep->tailbuf_paddr, GFP_ATOMIC);
+	if (!ep->tailbuf)
+		return -ENOMEM;
+
+	return 0;
+}
+
+/* Must be called with dev->lock held */
+static int gr_udc_init(struct gr_udc *dev)
+{
+	struct device_node *np = dev->dev->of_node;
+	u32 epctrl_val;
+	u32 dmactrl_val;
+	int i;
+	int ret = 0;
+	u32 bufsize;
+
+	gr_set_address(dev, 0);
+
+	INIT_LIST_HEAD(&dev->gadget.ep_list);
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+	dev->gadget.ep0 = &dev->epi[0].ep;
+
+	INIT_LIST_HEAD(&dev->ep_list);
+	gr_set_ep0state(dev, GR_EP0_DISCONNECT);
+
+	for (i = 0; i < dev->nepo; i++) {
+		if (of_property_read_u32_index(np, "epobufsizes", i, &bufsize))
+			bufsize = 1024;
+		ret = gr_ep_init(dev, i, 0, bufsize);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < dev->nepi; i++) {
+		if (of_property_read_u32_index(np, "epibufsizes", i, &bufsize))
+			bufsize = 1024;
+		ret = gr_ep_init(dev, i, 1, bufsize);
+		if (ret)
+			return ret;
+	}
+
+	/* Must be disabled by default */
+	dev->remote_wakeup = 0;
+
+	/* Enable ep0out and ep0in */
+	epctrl_val = (MAX_CTRL_PL_SIZE << GR_EPCTRL_MAXPL_POS) | GR_EPCTRL_EV;
+	dmactrl_val = GR_DMACTRL_IE | GR_DMACTRL_AI;
+	gr_write32(&dev->epo[0].regs->epctrl, epctrl_val);
+	gr_write32(&dev->epi[0].regs->epctrl, epctrl_val | GR_EPCTRL_PI);
+	gr_write32(&dev->epo[0].regs->dmactrl, dmactrl_val);
+	gr_write32(&dev->epi[0].regs->dmactrl, dmactrl_val);
+
+	return 0;
+}
+
+static void gr_ep_remove(struct gr_udc *dev, int num, int is_in)
+{
+	struct gr_ep *ep;
+
+	if (is_in)
+		ep = &dev->epi[num];
+	else
+		ep = &dev->epo[num];
+
+	if (ep->tailbuf)
+		dma_free_coherent(dev->dev, ep->ep.maxpacket_limit,
+				  ep->tailbuf, ep->tailbuf_paddr);
+}
+
+static int gr_remove(struct platform_device *pdev)
+{
+	struct gr_udc *dev = platform_get_drvdata(pdev);
+	int i;
+
+	if (dev->added)
+		usb_del_gadget_udc(&dev->gadget); /* Shuts everything down */
+	if (dev->driver)
+		return -EBUSY;
+
+	gr_dfs_delete(dev);
+	dma_pool_destroy(dev->desc_pool);
+	platform_set_drvdata(pdev, NULL);
+
+	gr_free_request(&dev->epi[0].ep, &dev->ep0reqi->req);
+	gr_free_request(&dev->epo[0].ep, &dev->ep0reqo->req);
+
+	for (i = 0; i < dev->nepo; i++)
+		gr_ep_remove(dev, i, 0);
+	for (i = 0; i < dev->nepi; i++)
+		gr_ep_remove(dev, i, 1);
+
+	return 0;
+}
+static int gr_request_irq(struct gr_udc *dev, int irq)
+{
+	return devm_request_threaded_irq(dev->dev, irq, gr_irq, gr_irq_handler,
+					 IRQF_SHARED, driver_name, dev);
+}
+
+static int gr_probe(struct platform_device *pdev)
+{
+	struct gr_udc *dev;
+	struct gr_regs __iomem *regs;
+	int retval;
+	u32 status;
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+	dev->dev = &pdev->dev;
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	dev->irq = platform_get_irq(pdev, 0);
+	if (dev->irq <= 0)
+		return -ENODEV;
+
+	/* Some core configurations has separate irqs for IN and OUT events */
+	dev->irqi = platform_get_irq(pdev, 1);
+	if (dev->irqi > 0) {
+		dev->irqo = platform_get_irq(pdev, 2);
+		if (dev->irqo <= 0)
+			return -ENODEV;
+	} else {
+		dev->irqi = 0;
+	}
+
+	dev->gadget.name = driver_name;
+	dev->gadget.max_speed = USB_SPEED_HIGH;
+	dev->gadget.ops = &gr_ops;
+
+	spin_lock_init(&dev->lock);
+	dev->regs = regs;
+
+	platform_set_drvdata(pdev, dev);
+
+	/* Determine number of endpoints and data interface mode */
+	status = gr_read32(&dev->regs->status);
+	dev->nepi = ((status & GR_STATUS_NEPI_MASK) >> GR_STATUS_NEPI_POS) + 1;
+	dev->nepo = ((status & GR_STATUS_NEPO_MASK) >> GR_STATUS_NEPO_POS) + 1;
+
+	if (!(status & GR_STATUS_DM)) {
+		dev_err(dev->dev, "Slave mode cores are not supported\n");
+		return -ENODEV;
+	}
+
+	/* --- Effects of the following calls might need explicit cleanup --- */
+
+	/* Create DMA pool for descriptors */
+	dev->desc_pool = dma_pool_create("desc_pool", dev->dev,
+					 sizeof(struct gr_dma_desc), 4, 0);
+	if (!dev->desc_pool) {
+		dev_err(dev->dev, "Could not allocate DMA pool");
+		return -ENOMEM;
+	}
+
+	/* Inside lock so that no gadget can use this udc until probe is done */
+	retval = usb_add_gadget_udc(dev->dev, &dev->gadget);
+	if (retval) {
+		dev_err(dev->dev, "Could not add gadget udc");
+		goto out;
+	}
+	dev->added = 1;
+
+	spin_lock(&dev->lock);
+
+	retval = gr_udc_init(dev);
+	if (retval) {
+		spin_unlock(&dev->lock);
+		goto out;
+	}
+
+	/* Clear all interrupt enables that might be left on since last boot */
+	gr_disable_interrupts_and_pullup(dev);
+
+	spin_unlock(&dev->lock);
+
+	gr_dfs_create(dev);
+
+	retval = gr_request_irq(dev, dev->irq);
+	if (retval) {
+		dev_err(dev->dev, "Failed to request irq %d\n", dev->irq);
+		goto out;
+	}
+
+	if (dev->irqi) {
+		retval = gr_request_irq(dev, dev->irqi);
+		if (retval) {
+			dev_err(dev->dev, "Failed to request irqi %d\n",
+				dev->irqi);
+			goto out;
+		}
+		retval = gr_request_irq(dev, dev->irqo);
+		if (retval) {
+			dev_err(dev->dev, "Failed to request irqo %d\n",
+				dev->irqo);
+			goto out;
+		}
+	}
+
+	if (dev->irqi)
+		dev_info(dev->dev, "regs: %p, irqs %d, %d, %d\n", dev->regs,
+			 dev->irq, dev->irqi, dev->irqo);
+	else
+		dev_info(dev->dev, "regs: %p, irq %d\n", dev->regs, dev->irq);
+
+out:
+	if (retval)
+		gr_remove(pdev);
+
+	return retval;
+}
+
+static const struct of_device_id gr_match[] = {
+	{.name = "GAISLER_USBDC"},
+	{.name = "01_021"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, gr_match);
+
+static struct platform_driver gr_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = gr_match,
+	},
+	.probe = gr_probe,
+	.remove = gr_remove,
+};
+module_platform_driver(gr_driver);
+
+MODULE_AUTHOR("Aeroflex Gaisler AB.");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/udc/gr_udc.h b/drivers/usb/gadget/udc/gr_udc.h
new file mode 100644
index 000000000..701342391
--- /dev/null
+++ b/drivers/usb/gadget/udc/gr_udc.h
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * USB Peripheral Controller driver for Aeroflex Gaisler GRUSBDC.
+ *
+ * 2013 (c) Aeroflex Gaisler AB
+ *
+ * This driver supports GRUSBDC USB Device Controller cores available in the
+ * GRLIB VHDL IP core library.
+ *
+ * Full documentation of the GRUSBDC core can be found here:
+ * https://www.gaisler.com/products/grlib/grip.pdf
+ *
+ * Contributors:
+ * - Andreas Larsson <andreas@gaisler.com>
+ * - Marko Isomaki
+ */
+
+/* Control registers on the AMBA bus */
+
+#define GR_MAXEP	16	/* Max # endpoints for *each* direction */
+
+struct gr_epregs {
+	u32 epctrl;
+	union {
+		struct { /* Slave mode*/
+			u32 slvctrl;
+			u32 slvdata;
+		};
+		struct { /* DMA mode*/
+			u32 dmactrl;
+			u32 dmaaddr;
+		};
+	};
+	u32 epstat;
+};
+
+struct gr_regs {
+	struct gr_epregs	epo[GR_MAXEP];	/* 0x000 - 0x0fc */
+	struct gr_epregs	epi[GR_MAXEP];	/* 0x100 - 0x1fc */
+	u32			control;	/* 0x200 */
+	u32			status;		/* 0x204 */
+};
+
+#define GR_EPCTRL_BUFSZ_SCALER	8
+#define GR_EPCTRL_BUFSZ_MASK	0xffe00000
+#define GR_EPCTRL_BUFSZ_POS	21
+#define GR_EPCTRL_PI		BIT(20)
+#define GR_EPCTRL_CB		BIT(19)
+#define GR_EPCTRL_CS		BIT(18)
+#define GR_EPCTRL_MAXPL_MASK	0x0003ff80
+#define GR_EPCTRL_MAXPL_POS	7
+#define GR_EPCTRL_NT_MASK	0x00000060
+#define GR_EPCTRL_NT_POS	5
+#define GR_EPCTRL_TT_MASK	0x00000018
+#define GR_EPCTRL_TT_POS	3
+#define GR_EPCTRL_EH		BIT(2)
+#define GR_EPCTRL_ED		BIT(1)
+#define GR_EPCTRL_EV		BIT(0)
+
+#define GR_DMACTRL_AE		BIT(10)
+#define GR_DMACTRL_AD		BIT(3)
+#define GR_DMACTRL_AI		BIT(2)
+#define GR_DMACTRL_IE		BIT(1)
+#define GR_DMACTRL_DA		BIT(0)
+
+#define GR_EPSTAT_PT		BIT(29)
+#define GR_EPSTAT_PR		BIT(29)
+#define GR_EPSTAT_B1CNT_MASK	0x1fff0000
+#define GR_EPSTAT_B1CNT_POS	16
+#define GR_EPSTAT_B0CNT_MASK	0x0000fff8
+#define GR_EPSTAT_B0CNT_POS	3
+#define GR_EPSTAT_B1		BIT(2)
+#define GR_EPSTAT_B0		BIT(1)
+#define GR_EPSTAT_BS		BIT(0)
+
+#define GR_CONTROL_SI		BIT(31)
+#define GR_CONTROL_UI		BIT(30)
+#define GR_CONTROL_VI		BIT(29)
+#define GR_CONTROL_SP		BIT(28)
+#define GR_CONTROL_FI		BIT(27)
+#define GR_CONTROL_EP		BIT(14)
+#define GR_CONTROL_DH		BIT(13)
+#define GR_CONTROL_RW		BIT(12)
+#define GR_CONTROL_TS_MASK	0x00000e00
+#define GR_CONTROL_TS_POS	9
+#define GR_CONTROL_TM		BIT(8)
+#define GR_CONTROL_UA_MASK	0x000000fe
+#define GR_CONTROL_UA_POS	1
+#define GR_CONTROL_SU		BIT(0)
+
+#define GR_STATUS_NEPI_MASK	0xf0000000
+#define GR_STATUS_NEPI_POS	28
+#define GR_STATUS_NEPO_MASK	0x0f000000
+#define GR_STATUS_NEPO_POS	24
+#define GR_STATUS_DM		BIT(23)
+#define GR_STATUS_SU		BIT(17)
+#define GR_STATUS_UR		BIT(16)
+#define GR_STATUS_VB		BIT(15)
+#define GR_STATUS_SP		BIT(14)
+#define GR_STATUS_AF_MASK	0x00003800
+#define GR_STATUS_AF_POS	11
+#define GR_STATUS_FN_MASK	0x000007ff
+#define GR_STATUS_FN_POS	0
+
+
+#define MAX_CTRL_PL_SIZE 64 /* As per USB standard for full and high speed */
+
+/*-------------------------------------------------------------------------*/
+
+/* Driver data structures and utilities */
+
+struct gr_dma_desc {
+	u32 ctrl;
+	u32 data;
+	u32 next;
+
+	/* These must be last because hw uses the previous three */
+	u32 paddr;
+	struct gr_dma_desc *next_desc;
+};
+
+#define GR_DESC_OUT_CTRL_SE		BIT(17)
+#define GR_DESC_OUT_CTRL_IE		BIT(15)
+#define GR_DESC_OUT_CTRL_NX		BIT(14)
+#define GR_DESC_OUT_CTRL_EN		BIT(13)
+#define GR_DESC_OUT_CTRL_LEN_MASK	0x00001fff
+
+#define GR_DESC_IN_CTRL_MO		BIT(18)
+#define GR_DESC_IN_CTRL_PI		BIT(17)
+#define GR_DESC_IN_CTRL_ML		BIT(16)
+#define GR_DESC_IN_CTRL_IE		BIT(15)
+#define GR_DESC_IN_CTRL_NX		BIT(14)
+#define GR_DESC_IN_CTRL_EN		BIT(13)
+#define GR_DESC_IN_CTRL_LEN_MASK	0x00001fff
+
+#define GR_DESC_DMAADDR_MASK		0xfffffffc
+
+struct gr_ep {
+	struct usb_ep ep;
+	struct gr_udc *dev;
+	u16 bytes_per_buffer;
+	unsigned int dma_start;
+	struct gr_epregs __iomem *regs;
+
+	unsigned num:8;
+	unsigned is_in:1;
+	unsigned stopped:1;
+	unsigned wedged:1;
+	unsigned callback:1;
+
+	/* analogous to a host-side qh */
+	struct list_head queue;
+
+	struct list_head ep_list;
+
+	/* Bounce buffer for end of "odd" sized OUT requests */
+	void *tailbuf;
+	dma_addr_t tailbuf_paddr;
+};
+
+struct gr_request {
+	struct usb_request req;
+	struct list_head queue;
+
+	/* Chain of dma descriptors */
+	struct gr_dma_desc *first_desc; /* First in the chain */
+	struct gr_dma_desc *curr_desc; /* Current descriptor */
+	struct gr_dma_desc *last_desc; /* Last in the chain */
+
+	u16 evenlen; /* Size of even length head (if oddlen != 0) */
+	u16 oddlen; /* Size of odd length tail if buffer length is "odd" */
+
+	u8 setup; /* Setup packet */
+};
+
+enum gr_ep0state {
+	GR_EP0_DISCONNECT = 0,	/* No host */
+	GR_EP0_SETUP,		/* Between STATUS ack and SETUP report */
+	GR_EP0_IDATA,		/* IN data stage */
+	GR_EP0_ODATA,		/* OUT data stage */
+	GR_EP0_ISTATUS,		/* Status stage after IN data stage */
+	GR_EP0_OSTATUS,		/* Status stage after OUT data stage */
+	GR_EP0_STALL,		/* Data or status stages */
+	GR_EP0_SUSPEND,		/* USB suspend */
+};
+
+struct gr_udc {
+	struct usb_gadget gadget;
+	struct gr_ep epi[GR_MAXEP];
+	struct gr_ep epo[GR_MAXEP];
+	struct usb_gadget_driver *driver;
+	struct dma_pool *desc_pool;
+	struct device *dev;
+
+	enum gr_ep0state ep0state;
+	struct gr_request *ep0reqo;
+	struct gr_request *ep0reqi;
+
+	struct gr_regs __iomem *regs;
+	int irq;
+	int irqi;
+	int irqo;
+
+	unsigned added:1;
+	unsigned irq_enabled:1;
+	unsigned remote_wakeup:1;
+
+	u8 test_mode;
+
+	enum usb_device_state suspended_from;
+
+	unsigned int nepi;
+	unsigned int nepo;
+
+	struct list_head ep_list;
+
+	spinlock_t lock; /* General lock, a.k.a. "dev->lock" in comments */
+};
+
+#define to_gr_udc(gadget)	(container_of((gadget), struct gr_udc, gadget))
diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
new file mode 100644
index 000000000..fe62db32d
--- /dev/null
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -0,0 +1,3273 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * USB Gadget driver for LPC32xx
+ *
+ * Authors:
+ *    Kevin Wells <kevin.wells@nxp.com>
+ *    Mike James
+ *    Roland Stigge <stigge@antcom.de>
+ *
+ * Copyright (C) 2006 Philips Semiconductors
+ * Copyright (C) 2009 NXP Semiconductors
+ * Copyright (C) 2012 Roland Stigge
+ *
+ * Note: This driver is based on original work done by Mike James for
+ *       the LPC3180.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/prefetch.h>
+#include <linux/proc_fs.h>
+#include <linux/slab.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/isp1301.h>
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#endif
+
+/*
+ * USB device configuration structure
+ */
+typedef void (*usc_chg_event)(int);
+struct lpc32xx_usbd_cfg {
+	int vbus_drv_pol;   /* 0=active low drive for VBUS via ISP1301 */
+	usc_chg_event conn_chgb; /* Connection change event (optional) */
+	usc_chg_event susp_chgb; /* Suspend/resume event (optional) */
+	usc_chg_event rmwk_chgb; /* Enable/disable remote wakeup */
+};
+
+/*
+ * controller driver data structures
+ */
+
+/* 16 endpoints (not to be confused with 32 hardware endpoints) */
+#define	NUM_ENDPOINTS	16
+
+/*
+ * IRQ indices make reading the code a little easier
+ */
+#define IRQ_USB_LP	0
+#define IRQ_USB_HP	1
+#define IRQ_USB_DEVDMA	2
+#define IRQ_USB_ATX	3
+
+#define EP_OUT 0 /* RX (from host) */
+#define EP_IN 1 /* TX (to host) */
+
+/* Returns the interrupt mask for the selected hardware endpoint */
+#define EP_MASK_SEL(ep, dir) (1 << (((ep) * 2) + dir))
+
+#define EP_INT_TYPE 0
+#define EP_ISO_TYPE 1
+#define EP_BLK_TYPE 2
+#define EP_CTL_TYPE 3
+
+/* EP0 states */
+#define WAIT_FOR_SETUP 0 /* Wait for setup packet */
+#define DATA_IN        1 /* Expect dev->host transfer */
+#define DATA_OUT       2 /* Expect host->dev transfer */
+
+/* DD (DMA Descriptor) structure, requires word alignment, this is already
+ * defined in the LPC32XX USB device header file, but this version is slightly
+ * modified to tag some work data with each DMA descriptor. */
+struct lpc32xx_usbd_dd_gad {
+	u32 dd_next_phy;
+	u32 dd_setup;
+	u32 dd_buffer_addr;
+	u32 dd_status;
+	u32 dd_iso_ps_mem_addr;
+	u32 this_dma;
+	u32 iso_status[6]; /* 5 spare */
+	u32 dd_next_v;
+};
+
+/*
+ * Logical endpoint structure
+ */
+struct lpc32xx_ep {
+	struct usb_ep		ep;
+	struct list_head	queue;
+	struct lpc32xx_udc	*udc;
+
+	u32			hwep_num_base; /* Physical hardware EP */
+	u32			hwep_num; /* Maps to hardware endpoint */
+	u32			maxpacket;
+	u32			lep;
+
+	bool			is_in;
+	bool			req_pending;
+	u32			eptype;
+
+	u32                     totalints;
+
+	bool			wedge;
+};
+
+enum atx_type {
+	ISP1301,
+	STOTG04,
+};
+
+/*
+ * Common UDC structure
+ */
+struct lpc32xx_udc {
+	struct usb_gadget	gadget;
+	struct usb_gadget_driver *driver;
+	struct platform_device	*pdev;
+	struct device		*dev;
+	spinlock_t		lock;
+	struct i2c_client	*isp1301_i2c_client;
+
+	/* Board and device specific */
+	struct lpc32xx_usbd_cfg	*board;
+	void __iomem		*udp_baseaddr;
+	int			udp_irq[4];
+	struct clk		*usb_slv_clk;
+
+	/* DMA support */
+	u32			*udca_v_base;
+	u32			udca_p_base;
+	struct dma_pool		*dd_cache;
+
+	/* Common EP and control data */
+	u32			enabled_devints;
+	u32			enabled_hwepints;
+	u32			dev_status;
+	u32			realized_eps;
+
+	/* VBUS detection, pullup, and power flags */
+	u8			vbus;
+	u8			last_vbus;
+	int			pullup;
+	int			poweron;
+	enum atx_type		atx;
+
+	/* Work queues related to I2C support */
+	struct work_struct	pullup_job;
+	struct work_struct	power_job;
+
+	/* USB device peripheral - various */
+	struct lpc32xx_ep	ep[NUM_ENDPOINTS];
+	bool			enabled;
+	bool			clocked;
+	bool			suspended;
+	int                     ep0state;
+	atomic_t                enabled_ep_cnt;
+	wait_queue_head_t       ep_disable_wait_queue;
+};
+
+/*
+ * Endpoint request
+ */
+struct lpc32xx_request {
+	struct usb_request	req;
+	struct list_head	queue;
+	struct lpc32xx_usbd_dd_gad *dd_desc_ptr;
+	bool			mapped;
+	bool			send_zlp;
+};
+
+static inline struct lpc32xx_udc *to_udc(struct usb_gadget *g)
+{
+	return container_of(g, struct lpc32xx_udc, gadget);
+}
+
+#define ep_dbg(epp, fmt, arg...) \
+	dev_dbg(epp->udc->dev, "%s: " fmt, __func__, ## arg)
+#define ep_err(epp, fmt, arg...) \
+	dev_err(epp->udc->dev, "%s: " fmt, __func__, ## arg)
+#define ep_info(epp, fmt, arg...) \
+	dev_info(epp->udc->dev, "%s: " fmt, __func__, ## arg)
+#define ep_warn(epp, fmt, arg...) \
+	dev_warn(epp->udc->dev, "%s:" fmt, __func__, ## arg)
+
+#define UDCA_BUFF_SIZE (128)
+
+/**********************************************************************
+ * USB device controller register offsets
+ **********************************************************************/
+
+#define USBD_DEVINTST(x)	((x) + 0x200)
+#define USBD_DEVINTEN(x)	((x) + 0x204)
+#define USBD_DEVINTCLR(x)	((x) + 0x208)
+#define USBD_DEVINTSET(x)	((x) + 0x20C)
+#define USBD_CMDCODE(x)		((x) + 0x210)
+#define USBD_CMDDATA(x)		((x) + 0x214)
+#define USBD_RXDATA(x)		((x) + 0x218)
+#define USBD_TXDATA(x)		((x) + 0x21C)
+#define USBD_RXPLEN(x)		((x) + 0x220)
+#define USBD_TXPLEN(x)		((x) + 0x224)
+#define USBD_CTRL(x)		((x) + 0x228)
+#define USBD_DEVINTPRI(x)	((x) + 0x22C)
+#define USBD_EPINTST(x)		((x) + 0x230)
+#define USBD_EPINTEN(x)		((x) + 0x234)
+#define USBD_EPINTCLR(x)	((x) + 0x238)
+#define USBD_EPINTSET(x)	((x) + 0x23C)
+#define USBD_EPINTPRI(x)	((x) + 0x240)
+#define USBD_REEP(x)		((x) + 0x244)
+#define USBD_EPIND(x)		((x) + 0x248)
+#define USBD_EPMAXPSIZE(x)	((x) + 0x24C)
+/* DMA support registers only below */
+/* Set, clear, or get enabled state of the DMA request status. If
+ * enabled, an IN or OUT token will start a DMA transfer for the EP */
+#define USBD_DMARST(x)		((x) + 0x250)
+#define USBD_DMARCLR(x)		((x) + 0x254)
+#define USBD_DMARSET(x)		((x) + 0x258)
+/* DMA UDCA head pointer */
+#define USBD_UDCAH(x)		((x) + 0x280)
+/* EP DMA status, enable, and disable. This is used to specifically
+ * enabled or disable DMA for a specific EP */
+#define USBD_EPDMAST(x)		((x) + 0x284)
+#define USBD_EPDMAEN(x)		((x) + 0x288)
+#define USBD_EPDMADIS(x)	((x) + 0x28C)
+/* DMA master interrupts enable and pending interrupts */
+#define USBD_DMAINTST(x)	((x) + 0x290)
+#define USBD_DMAINTEN(x)	((x) + 0x294)
+/* DMA end of transfer interrupt enable, disable, status */
+#define USBD_EOTINTST(x)	((x) + 0x2A0)
+#define USBD_EOTINTCLR(x)	((x) + 0x2A4)
+#define USBD_EOTINTSET(x)	((x) + 0x2A8)
+/* New DD request interrupt enable, disable, status */
+#define USBD_NDDRTINTST(x)	((x) + 0x2AC)
+#define USBD_NDDRTINTCLR(x)	((x) + 0x2B0)
+#define USBD_NDDRTINTSET(x)	((x) + 0x2B4)
+/* DMA error interrupt enable, disable, status */
+#define USBD_SYSERRTINTST(x)	((x) + 0x2B8)
+#define USBD_SYSERRTINTCLR(x)	((x) + 0x2BC)
+#define USBD_SYSERRTINTSET(x)	((x) + 0x2C0)
+
+/**********************************************************************
+ * USBD_DEVINTST/USBD_DEVINTEN/USBD_DEVINTCLR/USBD_DEVINTSET/
+ * USBD_DEVINTPRI register definitions
+ **********************************************************************/
+#define USBD_ERR_INT		(1 << 9)
+#define USBD_EP_RLZED		(1 << 8)
+#define USBD_TXENDPKT		(1 << 7)
+#define USBD_RXENDPKT		(1 << 6)
+#define USBD_CDFULL		(1 << 5)
+#define USBD_CCEMPTY		(1 << 4)
+#define USBD_DEV_STAT		(1 << 3)
+#define USBD_EP_SLOW		(1 << 2)
+#define USBD_EP_FAST		(1 << 1)
+#define USBD_FRAME		(1 << 0)
+
+/**********************************************************************
+ * USBD_EPINTST/USBD_EPINTEN/USBD_EPINTCLR/USBD_EPINTSET/
+ * USBD_EPINTPRI register definitions
+ **********************************************************************/
+/* End point selection macro (RX) */
+#define USBD_RX_EP_SEL(e)	(1 << ((e) << 1))
+
+/* End point selection macro (TX) */
+#define USBD_TX_EP_SEL(e)	(1 << (((e) << 1) + 1))
+
+/**********************************************************************
+ * USBD_REEP/USBD_DMARST/USBD_DMARCLR/USBD_DMARSET/USBD_EPDMAST/
+ * USBD_EPDMAEN/USBD_EPDMADIS/
+ * USBD_NDDRTINTST/USBD_NDDRTINTCLR/USBD_NDDRTINTSET/
+ * USBD_EOTINTST/USBD_EOTINTCLR/USBD_EOTINTSET/
+ * USBD_SYSERRTINTST/USBD_SYSERRTINTCLR/USBD_SYSERRTINTSET
+ * register definitions
+ **********************************************************************/
+/* Endpoint selection macro */
+#define USBD_EP_SEL(e)		(1 << (e))
+
+/**********************************************************************
+ * SBD_DMAINTST/USBD_DMAINTEN
+ **********************************************************************/
+#define USBD_SYS_ERR_INT	(1 << 2)
+#define USBD_NEW_DD_INT		(1 << 1)
+#define USBD_EOT_INT		(1 << 0)
+
+/**********************************************************************
+ * USBD_RXPLEN register definitions
+ **********************************************************************/
+#define USBD_PKT_RDY		(1 << 11)
+#define USBD_DV			(1 << 10)
+#define USBD_PK_LEN_MASK	0x3FF
+
+/**********************************************************************
+ * USBD_CTRL register definitions
+ **********************************************************************/
+#define USBD_LOG_ENDPOINT(e)	((e) << 2)
+#define USBD_WR_EN		(1 << 1)
+#define USBD_RD_EN		(1 << 0)
+
+/**********************************************************************
+ * USBD_CMDCODE register definitions
+ **********************************************************************/
+#define USBD_CMD_CODE(c)	((c) << 16)
+#define USBD_CMD_PHASE(p)	((p) << 8)
+
+/**********************************************************************
+ * USBD_DMARST/USBD_DMARCLR/USBD_DMARSET register definitions
+ **********************************************************************/
+#define USBD_DMAEP(e)		(1 << (e))
+
+/* DD (DMA Descriptor) structure, requires word alignment */
+struct lpc32xx_usbd_dd {
+	u32 *dd_next;
+	u32 dd_setup;
+	u32 dd_buffer_addr;
+	u32 dd_status;
+	u32 dd_iso_ps_mem_addr;
+};
+
+/* dd_setup bit defines */
+#define DD_SETUP_ATLE_DMA_MODE	0x01
+#define DD_SETUP_NEXT_DD_VALID	0x04
+#define DD_SETUP_ISO_EP		0x10
+#define DD_SETUP_PACKETLEN(n)	(((n) & 0x7FF) << 5)
+#define DD_SETUP_DMALENBYTES(n)	(((n) & 0xFFFF) << 16)
+
+/* dd_status bit defines */
+#define DD_STATUS_DD_RETIRED	0x01
+#define DD_STATUS_STS_MASK	0x1E
+#define DD_STATUS_STS_NS	0x00 /* Not serviced */
+#define DD_STATUS_STS_BS	0x02 /* Being serviced */
+#define DD_STATUS_STS_NC	0x04 /* Normal completion */
+#define DD_STATUS_STS_DUR	0x06 /* Data underrun (short packet) */
+#define DD_STATUS_STS_DOR	0x08 /* Data overrun */
+#define DD_STATUS_STS_SE	0x12 /* System error */
+#define DD_STATUS_PKT_VAL	0x20 /* Packet valid */
+#define DD_STATUS_LSB_EX	0x40 /* LS byte extracted (ATLE) */
+#define DD_STATUS_MSB_EX	0x80 /* MS byte extracted (ATLE) */
+#define DD_STATUS_MLEN(n)	(((n) >> 8) & 0x3F)
+#define DD_STATUS_CURDMACNT(n)	(((n) >> 16) & 0xFFFF)
+
+/*
+ *
+ * Protocol engine bits below
+ *
+ */
+/* Device Interrupt Bit Definitions */
+#define FRAME_INT		0x00000001
+#define EP_FAST_INT		0x00000002
+#define EP_SLOW_INT		0x00000004
+#define DEV_STAT_INT		0x00000008
+#define CCEMTY_INT		0x00000010
+#define CDFULL_INT		0x00000020
+#define RxENDPKT_INT		0x00000040
+#define TxENDPKT_INT		0x00000080
+#define EP_RLZED_INT		0x00000100
+#define ERR_INT			0x00000200
+
+/* Rx & Tx Packet Length Definitions */
+#define PKT_LNGTH_MASK		0x000003FF
+#define PKT_DV			0x00000400
+#define PKT_RDY			0x00000800
+
+/* USB Control Definitions */
+#define CTRL_RD_EN		0x00000001
+#define CTRL_WR_EN		0x00000002
+
+/* Command Codes */
+#define CMD_SET_ADDR		0x00D00500
+#define CMD_CFG_DEV		0x00D80500
+#define CMD_SET_MODE		0x00F30500
+#define CMD_RD_FRAME		0x00F50500
+#define DAT_RD_FRAME		0x00F50200
+#define CMD_RD_TEST		0x00FD0500
+#define DAT_RD_TEST		0x00FD0200
+#define CMD_SET_DEV_STAT	0x00FE0500
+#define CMD_GET_DEV_STAT	0x00FE0500
+#define DAT_GET_DEV_STAT	0x00FE0200
+#define CMD_GET_ERR_CODE	0x00FF0500
+#define DAT_GET_ERR_CODE	0x00FF0200
+#define CMD_RD_ERR_STAT		0x00FB0500
+#define DAT_RD_ERR_STAT		0x00FB0200
+#define DAT_WR_BYTE(x)		(0x00000100 | ((x) << 16))
+#define CMD_SEL_EP(x)		(0x00000500 | ((x) << 16))
+#define DAT_SEL_EP(x)		(0x00000200 | ((x) << 16))
+#define CMD_SEL_EP_CLRI(x)	(0x00400500 | ((x) << 16))
+#define DAT_SEL_EP_CLRI(x)	(0x00400200 | ((x) << 16))
+#define CMD_SET_EP_STAT(x)	(0x00400500 | ((x) << 16))
+#define CMD_CLR_BUF		0x00F20500
+#define DAT_CLR_BUF		0x00F20200
+#define CMD_VALID_BUF		0x00FA0500
+
+/* Device Address Register Definitions */
+#define DEV_ADDR_MASK		0x7F
+#define DEV_EN			0x80
+
+/* Device Configure Register Definitions */
+#define CONF_DVICE		0x01
+
+/* Device Mode Register Definitions */
+#define AP_CLK			0x01
+#define INAK_CI			0x02
+#define INAK_CO			0x04
+#define INAK_II			0x08
+#define INAK_IO			0x10
+#define INAK_BI			0x20
+#define INAK_BO			0x40
+
+/* Device Status Register Definitions */
+#define DEV_CON			0x01
+#define DEV_CON_CH		0x02
+#define DEV_SUS			0x04
+#define DEV_SUS_CH		0x08
+#define DEV_RST			0x10
+
+/* Error Code Register Definitions */
+#define ERR_EC_MASK		0x0F
+#define ERR_EA			0x10
+
+/* Error Status Register Definitions */
+#define ERR_PID			0x01
+#define ERR_UEPKT		0x02
+#define ERR_DCRC		0x04
+#define ERR_TIMOUT		0x08
+#define ERR_EOP			0x10
+#define ERR_B_OVRN		0x20
+#define ERR_BTSTF		0x40
+#define ERR_TGL			0x80
+
+/* Endpoint Select Register Definitions */
+#define EP_SEL_F		0x01
+#define EP_SEL_ST		0x02
+#define EP_SEL_STP		0x04
+#define EP_SEL_PO		0x08
+#define EP_SEL_EPN		0x10
+#define EP_SEL_B_1_FULL		0x20
+#define EP_SEL_B_2_FULL		0x40
+
+/* Endpoint Status Register Definitions */
+#define EP_STAT_ST		0x01
+#define EP_STAT_DA		0x20
+#define EP_STAT_RF_MO		0x40
+#define EP_STAT_CND_ST		0x80
+
+/* Clear Buffer Register Definitions */
+#define CLR_BUF_PO		0x01
+
+/* DMA Interrupt Bit Definitions */
+#define EOT_INT			0x01
+#define NDD_REQ_INT		0x02
+#define SYS_ERR_INT		0x04
+
+#define	DRIVER_VERSION	"1.03"
+static const char driver_name[] = "lpc32xx_udc";
+
+/*
+ *
+ * proc interface support
+ *
+ */
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+static char *epnames[] = {"INT", "ISO", "BULK", "CTRL"};
+static const char debug_filename[] = "driver/udc";
+
+static void proc_ep_show(struct seq_file *s, struct lpc32xx_ep *ep)
+{
+	struct lpc32xx_request *req;
+
+	seq_printf(s, "\n");
+	seq_printf(s, "%12s, maxpacket %4d %3s",
+			ep->ep.name, ep->ep.maxpacket,
+			ep->is_in ? "in" : "out");
+	seq_printf(s, " type %4s", epnames[ep->eptype]);
+	seq_printf(s, " ints: %12d", ep->totalints);
+
+	if (list_empty(&ep->queue))
+		seq_printf(s, "\t(queue empty)\n");
+	else {
+		list_for_each_entry(req, &ep->queue, queue) {
+			u32 length = req->req.actual;
+
+			seq_printf(s, "\treq %p len %d/%d buf %p\n",
+				   &req->req, length,
+				   req->req.length, req->req.buf);
+		}
+	}
+}
+
+static int udc_show(struct seq_file *s, void *unused)
+{
+	struct lpc32xx_udc *udc = s->private;
+	struct lpc32xx_ep *ep;
+	unsigned long flags;
+
+	seq_printf(s, "%s: version %s\n", driver_name, DRIVER_VERSION);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	seq_printf(s, "vbus %s, pullup %s, %s powered%s, gadget %s\n\n",
+		   udc->vbus ? "present" : "off",
+		   udc->enabled ? (udc->vbus ? "active" : "enabled") :
+		   "disabled",
+		   udc->gadget.is_selfpowered ? "self" : "VBUS",
+		   udc->suspended ? ", suspended" : "",
+		   udc->driver ? udc->driver->driver.name : "(none)");
+
+	if (udc->enabled && udc->vbus) {
+		proc_ep_show(s, &udc->ep[0]);
+		list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list)
+			proc_ep_show(s, ep);
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(udc);
+
+static void create_debug_file(struct lpc32xx_udc *udc)
+{
+	debugfs_create_file(debug_filename, 0, NULL, udc, &udc_fops);
+}
+
+static void remove_debug_file(struct lpc32xx_udc *udc)
+{
+	debugfs_lookup_and_remove(debug_filename, NULL);
+}
+
+#else
+static inline void create_debug_file(struct lpc32xx_udc *udc) {}
+static inline void remove_debug_file(struct lpc32xx_udc *udc) {}
+#endif
+
+/* Primary initialization sequence for the ISP1301 transceiver */
+static void isp1301_udc_configure(struct lpc32xx_udc *udc)
+{
+	u8 value;
+	s32 vendor, product;
+
+	vendor = i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00);
+	product = i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x02);
+
+	if (vendor == 0x0483 && product == 0xa0c4)
+		udc->atx = STOTG04;
+
+	/* LPC32XX only supports DAT_SE0 USB mode */
+	/* This sequence is important */
+
+	/* Disable transparent UART mode first */
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		(ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
+		MC1_UART_EN);
+
+	/* Set full speed and SE0 mode */
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		(ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_MODE_CONTROL_1, (MC1_SPEED_REG | MC1_DAT_SE0));
+
+	/*
+	 * The PSW_OE enable bit state is reversed in the ISP1301 User's Guide
+	 */
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		(ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
+
+	value = MC2_BI_DI;
+	if (udc->atx != STOTG04)
+		value |= MC2_SPD_SUSP_CTRL;
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_MODE_CONTROL_2, value);
+
+	/* Driver VBUS_DRV high or low depending on board setup */
+	if (udc->board->vbus_drv_pol != 0)
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV);
+	else
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
+			OTG1_VBUS_DRV);
+
+	/* Bi-directional mode with suspend control
+	 * Enable both pulldowns for now - the pullup will be enable when VBUS
+	 * is detected */
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_OTG_CONTROL_1,
+		(0 | OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
+
+	/* Discharge VBUS (just in case) */
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DISCHRG);
+	msleep(1);
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
+		OTG1_VBUS_DISCHRG);
+
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
+
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
+
+	dev_info(udc->dev, "ISP1301 Vendor ID  : 0x%04x\n", vendor);
+	dev_info(udc->dev, "ISP1301 Product ID : 0x%04x\n", product);
+	dev_info(udc->dev, "ISP1301 Version ID : 0x%04x\n",
+		 i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x14));
+
+}
+
+/* Enables or disables the USB device pullup via the ISP1301 transceiver */
+static void isp1301_pullup_set(struct lpc32xx_udc *udc)
+{
+	if (udc->pullup)
+		/* Enable pullup for bus signalling */
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_OTG_CONTROL_1, OTG1_DP_PULLUP);
+	else
+		/* Enable pullup for bus signalling */
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
+			OTG1_DP_PULLUP);
+}
+
+static void pullup_work(struct work_struct *work)
+{
+	struct lpc32xx_udc *udc =
+		container_of(work, struct lpc32xx_udc, pullup_job);
+
+	isp1301_pullup_set(udc);
+}
+
+static void isp1301_pullup_enable(struct lpc32xx_udc *udc, int en_pullup,
+				  int block)
+{
+	if (en_pullup == udc->pullup)
+		return;
+
+	udc->pullup = en_pullup;
+	if (block)
+		isp1301_pullup_set(udc);
+	else
+		/* defer slow i2c pull up setting */
+		schedule_work(&udc->pullup_job);
+}
+
+#ifdef CONFIG_PM
+/* Powers up or down the ISP1301 transceiver */
+static void isp1301_set_powerstate(struct lpc32xx_udc *udc, int enable)
+{
+	/* There is no "global power down" register for stotg04 */
+	if (udc->atx == STOTG04)
+		return;
+
+	if (enable != 0)
+		/* Power up ISP1301 - this ISP1301 will automatically wakeup
+		   when VBUS is detected */
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR,
+			MC2_GLOBAL_PWR_DN);
+	else
+		/* Power down ISP1301 */
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
+}
+
+static void power_work(struct work_struct *work)
+{
+	struct lpc32xx_udc *udc =
+		container_of(work, struct lpc32xx_udc, power_job);
+
+	isp1301_set_powerstate(udc, udc->poweron);
+}
+#endif
+
+/*
+ *
+ * USB protocol engine command/data read/write helper functions
+ *
+ */
+/* Issues a single command to the USB device state machine */
+static void udc_protocol_cmd_w(struct lpc32xx_udc *udc, u32 cmd)
+{
+	u32 pass = 0;
+	int to;
+
+	/* EP may lock on CLRI if this read isn't done */
+	u32 tmp = readl(USBD_DEVINTST(udc->udp_baseaddr));
+	(void) tmp;
+
+	while (pass == 0) {
+		writel(USBD_CCEMPTY, USBD_DEVINTCLR(udc->udp_baseaddr));
+
+		/* Write command code */
+		writel(cmd, USBD_CMDCODE(udc->udp_baseaddr));
+		to = 10000;
+		while (((readl(USBD_DEVINTST(udc->udp_baseaddr)) &
+			 USBD_CCEMPTY) == 0) && (to > 0)) {
+			to--;
+		}
+
+		if (to > 0)
+			pass = 1;
+
+		cpu_relax();
+	}
+}
+
+/* Issues 2 commands (or command and data) to the USB device state machine */
+static inline void udc_protocol_cmd_data_w(struct lpc32xx_udc *udc, u32 cmd,
+					   u32 data)
+{
+	udc_protocol_cmd_w(udc, cmd);
+	udc_protocol_cmd_w(udc, data);
+}
+
+/* Issues a single command to the USB device state machine and reads
+ * response data */
+static u32 udc_protocol_cmd_r(struct lpc32xx_udc *udc, u32 cmd)
+{
+	int to = 1000;
+
+	/* Write a command and read data from the protocol engine */
+	writel((USBD_CDFULL | USBD_CCEMPTY),
+		     USBD_DEVINTCLR(udc->udp_baseaddr));
+
+	/* Write command code */
+	udc_protocol_cmd_w(udc, cmd);
+
+	while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) & USBD_CDFULL))
+	       && (to > 0))
+		to--;
+	if (!to)
+		dev_dbg(udc->dev,
+			"Protocol engine didn't receive response (CDFULL)\n");
+
+	return readl(USBD_CMDDATA(udc->udp_baseaddr));
+}
+
+/*
+ *
+ * USB device interrupt mask support functions
+ *
+ */
+/* Enable one or more USB device interrupts */
+static inline void uda_enable_devint(struct lpc32xx_udc *udc, u32 devmask)
+{
+	udc->enabled_devints |= devmask;
+	writel(udc->enabled_devints, USBD_DEVINTEN(udc->udp_baseaddr));
+}
+
+/* Disable one or more USB device interrupts */
+static inline void uda_disable_devint(struct lpc32xx_udc *udc, u32 mask)
+{
+	udc->enabled_devints &= ~mask;
+	writel(udc->enabled_devints, USBD_DEVINTEN(udc->udp_baseaddr));
+}
+
+/* Clear one or more USB device interrupts */
+static inline void uda_clear_devint(struct lpc32xx_udc *udc, u32 mask)
+{
+	writel(mask, USBD_DEVINTCLR(udc->udp_baseaddr));
+}
+
+/*
+ *
+ * Endpoint interrupt disable/enable functions
+ *
+ */
+/* Enable one or more USB endpoint interrupts */
+static void uda_enable_hwepint(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc->enabled_hwepints |= (1 << hwep);
+	writel(udc->enabled_hwepints, USBD_EPINTEN(udc->udp_baseaddr));
+}
+
+/* Disable one or more USB endpoint interrupts */
+static void uda_disable_hwepint(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc->enabled_hwepints &= ~(1 << hwep);
+	writel(udc->enabled_hwepints, USBD_EPINTEN(udc->udp_baseaddr));
+}
+
+/* Clear one or more USB endpoint interrupts */
+static inline void uda_clear_hwepint(struct lpc32xx_udc *udc, u32 hwep)
+{
+	writel((1 << hwep), USBD_EPINTCLR(udc->udp_baseaddr));
+}
+
+/* Enable DMA for the HW channel */
+static inline void udc_ep_dma_enable(struct lpc32xx_udc *udc, u32 hwep)
+{
+	writel((1 << hwep), USBD_EPDMAEN(udc->udp_baseaddr));
+}
+
+/* Disable DMA for the HW channel */
+static inline void udc_ep_dma_disable(struct lpc32xx_udc *udc, u32 hwep)
+{
+	writel((1 << hwep), USBD_EPDMADIS(udc->udp_baseaddr));
+}
+
+/*
+ *
+ * Endpoint realize/unrealize functions
+ *
+ */
+/* Before an endpoint can be used, it needs to be realized
+ * in the USB protocol engine - this realizes the endpoint.
+ * The interrupt (FIFO or DMA) is not enabled with this function */
+static void udc_realize_hwep(struct lpc32xx_udc *udc, u32 hwep,
+			     u32 maxpacket)
+{
+	int to = 1000;
+
+	writel(USBD_EP_RLZED, USBD_DEVINTCLR(udc->udp_baseaddr));
+	writel(hwep, USBD_EPIND(udc->udp_baseaddr));
+	udc->realized_eps |= (1 << hwep);
+	writel(udc->realized_eps, USBD_REEP(udc->udp_baseaddr));
+	writel(maxpacket, USBD_EPMAXPSIZE(udc->udp_baseaddr));
+
+	/* Wait until endpoint is realized in hardware */
+	while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) &
+		  USBD_EP_RLZED)) && (to > 0))
+		to--;
+	if (!to)
+		dev_dbg(udc->dev, "EP not correctly realized in hardware\n");
+
+	writel(USBD_EP_RLZED, USBD_DEVINTCLR(udc->udp_baseaddr));
+}
+
+/* Unrealize an EP */
+static void udc_unrealize_hwep(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc->realized_eps &= ~(1 << hwep);
+	writel(udc->realized_eps, USBD_REEP(udc->udp_baseaddr));
+}
+
+/*
+ *
+ * Endpoint support functions
+ *
+ */
+/* Select and clear endpoint interrupt */
+static u32 udc_selep_clrint(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc_protocol_cmd_w(udc, CMD_SEL_EP_CLRI(hwep));
+	return udc_protocol_cmd_r(udc, DAT_SEL_EP_CLRI(hwep));
+}
+
+/* Disables the endpoint in the USB protocol engine */
+static void udc_disable_hwep(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep),
+				DAT_WR_BYTE(EP_STAT_DA));
+}
+
+/* Stalls the endpoint - endpoint will return STALL */
+static void udc_stall_hwep(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep),
+				DAT_WR_BYTE(EP_STAT_ST));
+}
+
+/* Clear stall or reset endpoint */
+static void udc_clrstall_hwep(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep),
+				DAT_WR_BYTE(0));
+}
+
+/* Select an endpoint for endpoint status, clear, validate */
+static void udc_select_hwep(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc_protocol_cmd_w(udc, CMD_SEL_EP(hwep));
+}
+
+/*
+ *
+ * Endpoint buffer management functions
+ *
+ */
+/* Clear the current endpoint's buffer */
+static void udc_clr_buffer_hwep(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc_select_hwep(udc, hwep);
+	udc_protocol_cmd_w(udc, CMD_CLR_BUF);
+}
+
+/* Validate the current endpoint's buffer */
+static void udc_val_buffer_hwep(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc_select_hwep(udc, hwep);
+	udc_protocol_cmd_w(udc, CMD_VALID_BUF);
+}
+
+static inline u32 udc_clearep_getsts(struct lpc32xx_udc *udc, u32 hwep)
+{
+	/* Clear EP interrupt */
+	uda_clear_hwepint(udc, hwep);
+	return udc_selep_clrint(udc, hwep);
+}
+
+/*
+ *
+ * USB EP DMA support
+ *
+ */
+/* Allocate a DMA Descriptor */
+static struct lpc32xx_usbd_dd_gad *udc_dd_alloc(struct lpc32xx_udc *udc)
+{
+	dma_addr_t			dma;
+	struct lpc32xx_usbd_dd_gad	*dd;
+
+	dd = dma_pool_alloc(udc->dd_cache, GFP_ATOMIC | GFP_DMA, &dma);
+	if (dd)
+		dd->this_dma = dma;
+
+	return dd;
+}
+
+/* Free a DMA Descriptor */
+static void udc_dd_free(struct lpc32xx_udc *udc, struct lpc32xx_usbd_dd_gad *dd)
+{
+	dma_pool_free(udc->dd_cache, dd, dd->this_dma);
+}
+
+/*
+ *
+ * USB setup and shutdown functions
+ *
+ */
+/* Enables or disables most of the USB system clocks when low power mode is
+ * needed. Clocks are typically started on a connection event, and disabled
+ * when a cable is disconnected */
+static void udc_clk_set(struct lpc32xx_udc *udc, int enable)
+{
+	if (enable != 0) {
+		if (udc->clocked)
+			return;
+
+		udc->clocked = 1;
+		clk_prepare_enable(udc->usb_slv_clk);
+	} else {
+		if (!udc->clocked)
+			return;
+
+		udc->clocked = 0;
+		clk_disable_unprepare(udc->usb_slv_clk);
+	}
+}
+
+/* Set/reset USB device address */
+static void udc_set_address(struct lpc32xx_udc *udc, u32 addr)
+{
+	/* Address will be latched at the end of the status phase, or
+	   latched immediately if function is called twice */
+	udc_protocol_cmd_data_w(udc, CMD_SET_ADDR,
+				DAT_WR_BYTE(DEV_EN | addr));
+}
+
+/* Setup up a IN request for DMA transfer - this consists of determining the
+ * list of DMA addresses for the transfer, allocating DMA Descriptors,
+ * installing the DD into the UDCA, and then enabling the DMA for that EP */
+static int udc_ep_in_req_dma(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
+{
+	struct lpc32xx_request *req;
+	u32 hwep = ep->hwep_num;
+
+	ep->req_pending = 1;
+
+	/* There will always be a request waiting here */
+	req = list_entry(ep->queue.next, struct lpc32xx_request, queue);
+
+	/* Place the DD Descriptor into the UDCA */
+	udc->udca_v_base[hwep] = req->dd_desc_ptr->this_dma;
+
+	/* Enable DMA and interrupt for the HW EP */
+	udc_ep_dma_enable(udc, hwep);
+
+	/* Clear ZLP if last packet is not of MAXP size */
+	if (req->req.length % ep->ep.maxpacket)
+		req->send_zlp = 0;
+
+	return 0;
+}
+
+/* Setup up a OUT request for DMA transfer - this consists of determining the
+ * list of DMA addresses for the transfer, allocating DMA Descriptors,
+ * installing the DD into the UDCA, and then enabling the DMA for that EP */
+static int udc_ep_out_req_dma(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
+{
+	struct lpc32xx_request *req;
+	u32 hwep = ep->hwep_num;
+
+	ep->req_pending = 1;
+
+	/* There will always be a request waiting here */
+	req = list_entry(ep->queue.next, struct lpc32xx_request, queue);
+
+	/* Place the DD Descriptor into the UDCA */
+	udc->udca_v_base[hwep] = req->dd_desc_ptr->this_dma;
+
+	/* Enable DMA and interrupt for the HW EP */
+	udc_ep_dma_enable(udc, hwep);
+	return 0;
+}
+
+static void udc_disable(struct lpc32xx_udc *udc)
+{
+	u32 i;
+
+	/* Disable device */
+	udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(0));
+	udc_protocol_cmd_data_w(udc, CMD_SET_DEV_STAT, DAT_WR_BYTE(0));
+
+	/* Disable all device interrupts (including EP0) */
+	uda_disable_devint(udc, 0x3FF);
+
+	/* Disable and reset all endpoint interrupts */
+	for (i = 0; i < 32; i++) {
+		uda_disable_hwepint(udc, i);
+		uda_clear_hwepint(udc, i);
+		udc_disable_hwep(udc, i);
+		udc_unrealize_hwep(udc, i);
+		udc->udca_v_base[i] = 0;
+
+		/* Disable and clear all interrupts and DMA */
+		udc_ep_dma_disable(udc, i);
+		writel((1 << i), USBD_EOTINTCLR(udc->udp_baseaddr));
+		writel((1 << i), USBD_NDDRTINTCLR(udc->udp_baseaddr));
+		writel((1 << i), USBD_SYSERRTINTCLR(udc->udp_baseaddr));
+		writel((1 << i), USBD_DMARCLR(udc->udp_baseaddr));
+	}
+
+	/* Disable DMA interrupts */
+	writel(0, USBD_DMAINTEN(udc->udp_baseaddr));
+
+	writel(0, USBD_UDCAH(udc->udp_baseaddr));
+}
+
+static void udc_enable(struct lpc32xx_udc *udc)
+{
+	u32 i;
+	struct lpc32xx_ep *ep = &udc->ep[0];
+
+	/* Start with known state */
+	udc_disable(udc);
+
+	/* Enable device */
+	udc_protocol_cmd_data_w(udc, CMD_SET_DEV_STAT, DAT_WR_BYTE(DEV_CON));
+
+	/* EP interrupts on high priority, FRAME interrupt on low priority */
+	writel(USBD_EP_FAST, USBD_DEVINTPRI(udc->udp_baseaddr));
+	writel(0xFFFF, USBD_EPINTPRI(udc->udp_baseaddr));
+
+	/* Clear any pending device interrupts */
+	writel(0x3FF, USBD_DEVINTCLR(udc->udp_baseaddr));
+
+	/* Setup UDCA - not yet used (DMA) */
+	writel(udc->udca_p_base, USBD_UDCAH(udc->udp_baseaddr));
+
+	/* Only enable EP0 in and out for now, EP0 only works in FIFO mode */
+	for (i = 0; i <= 1; i++) {
+		udc_realize_hwep(udc, i, ep->ep.maxpacket);
+		uda_enable_hwepint(udc, i);
+		udc_select_hwep(udc, i);
+		udc_clrstall_hwep(udc, i);
+		udc_clr_buffer_hwep(udc, i);
+	}
+
+	/* Device interrupt setup */
+	uda_clear_devint(udc, (USBD_ERR_INT | USBD_DEV_STAT | USBD_EP_SLOW |
+			       USBD_EP_FAST));
+	uda_enable_devint(udc, (USBD_ERR_INT | USBD_DEV_STAT | USBD_EP_SLOW |
+				USBD_EP_FAST));
+
+	/* Set device address to 0 - called twice to force a latch in the USB
+	   engine without the need of a setup packet status closure */
+	udc_set_address(udc, 0);
+	udc_set_address(udc, 0);
+
+	/* Enable master DMA interrupts */
+	writel((USBD_SYS_ERR_INT | USBD_EOT_INT),
+		     USBD_DMAINTEN(udc->udp_baseaddr));
+
+	udc->dev_status = 0;
+}
+
+/*
+ *
+ * USB device board specific events handled via callbacks
+ *
+ */
+/* Connection change event - notify board function of change */
+static void uda_power_event(struct lpc32xx_udc *udc, u32 conn)
+{
+	/* Just notify of a connection change event (optional) */
+	if (udc->board->conn_chgb != NULL)
+		udc->board->conn_chgb(conn);
+}
+
+/* Suspend/resume event - notify board function of change */
+static void uda_resm_susp_event(struct lpc32xx_udc *udc, u32 conn)
+{
+	/* Just notify of a Suspend/resume change event (optional) */
+	if (udc->board->susp_chgb != NULL)
+		udc->board->susp_chgb(conn);
+
+	if (conn)
+		udc->suspended = 0;
+	else
+		udc->suspended = 1;
+}
+
+/* Remote wakeup enable/disable - notify board function of change */
+static void uda_remwkp_cgh(struct lpc32xx_udc *udc)
+{
+	if (udc->board->rmwk_chgb != NULL)
+		udc->board->rmwk_chgb(udc->dev_status &
+				      (1 << USB_DEVICE_REMOTE_WAKEUP));
+}
+
+/* Reads data from FIFO, adjusts for alignment and data size */
+static void udc_pop_fifo(struct lpc32xx_udc *udc, u8 *data, u32 bytes)
+{
+	int n, i, bl;
+	u16 *p16;
+	u32 *p32, tmp, cbytes;
+
+	/* Use optimal data transfer method based on source address and size */
+	switch (((uintptr_t) data) & 0x3) {
+	case 0: /* 32-bit aligned */
+		p32 = (u32 *) data;
+		cbytes = (bytes & ~0x3);
+
+		/* Copy 32-bit aligned data first */
+		for (n = 0; n < cbytes; n += 4)
+			*p32++ = readl(USBD_RXDATA(udc->udp_baseaddr));
+
+		/* Handle any remaining bytes */
+		bl = bytes - cbytes;
+		if (bl) {
+			tmp = readl(USBD_RXDATA(udc->udp_baseaddr));
+			for (n = 0; n < bl; n++)
+				data[cbytes + n] = ((tmp >> (n * 8)) & 0xFF);
+
+		}
+		break;
+
+	case 1: /* 8-bit aligned */
+	case 3:
+		/* Each byte has to be handled independently */
+		for (n = 0; n < bytes; n += 4) {
+			tmp = readl(USBD_RXDATA(udc->udp_baseaddr));
+
+			bl = bytes - n;
+			if (bl > 4)
+				bl = 4;
+
+			for (i = 0; i < bl; i++)
+				data[n + i] = (u8) ((tmp >> (i * 8)) & 0xFF);
+		}
+		break;
+
+	case 2: /* 16-bit aligned */
+		p16 = (u16 *) data;
+		cbytes = (bytes & ~0x3);
+
+		/* Copy 32-bit sized objects first with 16-bit alignment */
+		for (n = 0; n < cbytes; n += 4) {
+			tmp = readl(USBD_RXDATA(udc->udp_baseaddr));
+			*p16++ = (u16)(tmp & 0xFFFF);
+			*p16++ = (u16)((tmp >> 16) & 0xFFFF);
+		}
+
+		/* Handle any remaining bytes */
+		bl = bytes - cbytes;
+		if (bl) {
+			tmp = readl(USBD_RXDATA(udc->udp_baseaddr));
+			for (n = 0; n < bl; n++)
+				data[cbytes + n] = ((tmp >> (n * 8)) & 0xFF);
+		}
+		break;
+	}
+}
+
+/* Read data from the FIFO for an endpoint. This function is for endpoints (such
+ * as EP0) that don't use DMA. This function should only be called if a packet
+ * is known to be ready to read for the endpoint. Note that the endpoint must
+ * be selected in the protocol engine prior to this call. */
+static u32 udc_read_hwep(struct lpc32xx_udc *udc, u32 hwep, u32 *data,
+			 u32 bytes)
+{
+	u32 tmpv;
+	int to = 1000;
+	u32 tmp, hwrep = ((hwep & 0x1E) << 1) | CTRL_RD_EN;
+
+	/* Setup read of endpoint */
+	writel(hwrep, USBD_CTRL(udc->udp_baseaddr));
+
+	/* Wait until packet is ready */
+	while ((((tmpv = readl(USBD_RXPLEN(udc->udp_baseaddr))) &
+		 PKT_RDY) == 0)	&& (to > 0))
+		to--;
+	if (!to)
+		dev_dbg(udc->dev, "No packet ready on FIFO EP read\n");
+
+	/* Mask out count */
+	tmp = tmpv & PKT_LNGTH_MASK;
+	if (bytes < tmp)
+		tmp = bytes;
+
+	if ((tmp > 0) && (data != NULL))
+		udc_pop_fifo(udc, (u8 *) data, tmp);
+
+	writel(((hwep & 0x1E) << 1), USBD_CTRL(udc->udp_baseaddr));
+
+	/* Clear the buffer */
+	udc_clr_buffer_hwep(udc, hwep);
+
+	return tmp;
+}
+
+/* Stuffs data into the FIFO, adjusts for alignment and data size */
+static void udc_stuff_fifo(struct lpc32xx_udc *udc, u8 *data, u32 bytes)
+{
+	int n, i, bl;
+	u16 *p16;
+	u32 *p32, tmp, cbytes;
+
+	/* Use optimal data transfer method based on source address and size */
+	switch (((uintptr_t) data) & 0x3) {
+	case 0: /* 32-bit aligned */
+		p32 = (u32 *) data;
+		cbytes = (bytes & ~0x3);
+
+		/* Copy 32-bit aligned data first */
+		for (n = 0; n < cbytes; n += 4)
+			writel(*p32++, USBD_TXDATA(udc->udp_baseaddr));
+
+		/* Handle any remaining bytes */
+		bl = bytes - cbytes;
+		if (bl) {
+			tmp = 0;
+			for (n = 0; n < bl; n++)
+				tmp |= data[cbytes + n] << (n * 8);
+
+			writel(tmp, USBD_TXDATA(udc->udp_baseaddr));
+		}
+		break;
+
+	case 1: /* 8-bit aligned */
+	case 3:
+		/* Each byte has to be handled independently */
+		for (n = 0; n < bytes; n += 4) {
+			bl = bytes - n;
+			if (bl > 4)
+				bl = 4;
+
+			tmp = 0;
+			for (i = 0; i < bl; i++)
+				tmp |= data[n + i] << (i * 8);
+
+			writel(tmp, USBD_TXDATA(udc->udp_baseaddr));
+		}
+		break;
+
+	case 2: /* 16-bit aligned */
+		p16 = (u16 *) data;
+		cbytes = (bytes & ~0x3);
+
+		/* Copy 32-bit aligned data first */
+		for (n = 0; n < cbytes; n += 4) {
+			tmp = *p16++ & 0xFFFF;
+			tmp |= (*p16++ & 0xFFFF) << 16;
+			writel(tmp, USBD_TXDATA(udc->udp_baseaddr));
+		}
+
+		/* Handle any remaining bytes */
+		bl = bytes - cbytes;
+		if (bl) {
+			tmp = 0;
+			for (n = 0; n < bl; n++)
+				tmp |= data[cbytes + n] << (n * 8);
+
+			writel(tmp, USBD_TXDATA(udc->udp_baseaddr));
+		}
+		break;
+	}
+}
+
+/* Write data to the FIFO for an endpoint. This function is for endpoints (such
+ * as EP0) that don't use DMA. Note that the endpoint must be selected in the
+ * protocol engine prior to this call. */
+static void udc_write_hwep(struct lpc32xx_udc *udc, u32 hwep, u32 *data,
+			   u32 bytes)
+{
+	u32 hwwep = ((hwep & 0x1E) << 1) | CTRL_WR_EN;
+
+	if ((bytes > 0) && (data == NULL))
+		return;
+
+	/* Setup write of endpoint */
+	writel(hwwep, USBD_CTRL(udc->udp_baseaddr));
+
+	writel(bytes, USBD_TXPLEN(udc->udp_baseaddr));
+
+	/* Need at least 1 byte to trigger TX */
+	if (bytes == 0)
+		writel(0, USBD_TXDATA(udc->udp_baseaddr));
+	else
+		udc_stuff_fifo(udc, (u8 *) data, bytes);
+
+	writel(((hwep & 0x1E) << 1), USBD_CTRL(udc->udp_baseaddr));
+
+	udc_val_buffer_hwep(udc, hwep);
+}
+
+/* USB device reset - resets USB to a default state with just EP0
+   enabled */
+static void uda_usb_reset(struct lpc32xx_udc *udc)
+{
+	u32 i = 0;
+	/* Re-init device controller and EP0 */
+	udc_enable(udc);
+	udc->gadget.speed = USB_SPEED_FULL;
+
+	for (i = 1; i < NUM_ENDPOINTS; i++) {
+		struct lpc32xx_ep *ep = &udc->ep[i];
+		ep->req_pending = 0;
+	}
+}
+
+/* Send a ZLP on EP0 */
+static void udc_ep0_send_zlp(struct lpc32xx_udc *udc)
+{
+	udc_write_hwep(udc, EP_IN, NULL, 0);
+}
+
+/* Get current frame number */
+static u16 udc_get_current_frame(struct lpc32xx_udc *udc)
+{
+	u16 flo, fhi;
+
+	udc_protocol_cmd_w(udc, CMD_RD_FRAME);
+	flo = (u16) udc_protocol_cmd_r(udc, DAT_RD_FRAME);
+	fhi = (u16) udc_protocol_cmd_r(udc, DAT_RD_FRAME);
+
+	return (fhi << 8) | flo;
+}
+
+/* Set the device as configured - enables all endpoints */
+static inline void udc_set_device_configured(struct lpc32xx_udc *udc)
+{
+	udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(CONF_DVICE));
+}
+
+/* Set the device as unconfigured - disables all endpoints */
+static inline void udc_set_device_unconfigured(struct lpc32xx_udc *udc)
+{
+	udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(0));
+}
+
+/* reinit == restore initial software state */
+static void udc_reinit(struct lpc32xx_udc *udc)
+{
+	u32 i;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+	INIT_LIST_HEAD(&udc->gadget.ep0->ep_list);
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		struct lpc32xx_ep *ep = &udc->ep[i];
+
+		if (i != 0)
+			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+		usb_ep_set_maxpacket_limit(&ep->ep, ep->maxpacket);
+		INIT_LIST_HEAD(&ep->queue);
+		ep->req_pending = 0;
+	}
+
+	udc->ep0state = WAIT_FOR_SETUP;
+}
+
+/* Must be called with lock */
+static void done(struct lpc32xx_ep *ep, struct lpc32xx_request *req, int status)
+{
+	struct lpc32xx_udc *udc = ep->udc;
+
+	list_del_init(&req->queue);
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	if (ep->lep) {
+		usb_gadget_unmap_request(&udc->gadget, &req->req, ep->is_in);
+
+		/* Free DDs */
+		udc_dd_free(udc, req->dd_desc_ptr);
+	}
+
+	if (status && status != -ESHUTDOWN)
+		ep_dbg(ep, "%s done %p, status %d\n", ep->ep.name, req, status);
+
+	ep->req_pending = 0;
+	spin_unlock(&udc->lock);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&udc->lock);
+}
+
+/* Must be called with lock */
+static void nuke(struct lpc32xx_ep *ep, int status)
+{
+	struct lpc32xx_request *req;
+
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct lpc32xx_request, queue);
+		done(ep, req, status);
+	}
+
+	if (status == -ESHUTDOWN) {
+		uda_disable_hwepint(ep->udc, ep->hwep_num);
+		udc_disable_hwep(ep->udc, ep->hwep_num);
+	}
+}
+
+/* IN endpoint 0 transfer */
+static int udc_ep0_in_req(struct lpc32xx_udc *udc)
+{
+	struct lpc32xx_request *req;
+	struct lpc32xx_ep *ep0 = &udc->ep[0];
+	u32 tsend, ts = 0;
+
+	if (list_empty(&ep0->queue))
+		/* Nothing to send */
+		return 0;
+	else
+		req = list_entry(ep0->queue.next, struct lpc32xx_request,
+				 queue);
+
+	tsend = ts = req->req.length - req->req.actual;
+	if (ts == 0) {
+		/* Send a ZLP */
+		udc_ep0_send_zlp(udc);
+		done(ep0, req, 0);
+		return 1;
+	} else if (ts > ep0->ep.maxpacket)
+		ts = ep0->ep.maxpacket; /* Just send what we can */
+
+	/* Write data to the EP0 FIFO and start transfer */
+	udc_write_hwep(udc, EP_IN, (req->req.buf + req->req.actual), ts);
+
+	/* Increment data pointer */
+	req->req.actual += ts;
+
+	if (tsend >= ep0->ep.maxpacket)
+		return 0; /* Stay in data transfer state */
+
+	/* Transfer request is complete */
+	udc->ep0state = WAIT_FOR_SETUP;
+	done(ep0, req, 0);
+	return 1;
+}
+
+/* OUT endpoint 0 transfer */
+static int udc_ep0_out_req(struct lpc32xx_udc *udc)
+{
+	struct lpc32xx_request *req;
+	struct lpc32xx_ep *ep0 = &udc->ep[0];
+	u32 tr, bufferspace;
+
+	if (list_empty(&ep0->queue))
+		return 0;
+	else
+		req = list_entry(ep0->queue.next, struct lpc32xx_request,
+				 queue);
+
+	if (req) {
+		if (req->req.length == 0) {
+			/* Just dequeue request */
+			done(ep0, req, 0);
+			udc->ep0state = WAIT_FOR_SETUP;
+			return 1;
+		}
+
+		/* Get data from FIFO */
+		bufferspace = req->req.length - req->req.actual;
+		if (bufferspace > ep0->ep.maxpacket)
+			bufferspace = ep0->ep.maxpacket;
+
+		/* Copy data to buffer */
+		prefetchw(req->req.buf + req->req.actual);
+		tr = udc_read_hwep(udc, EP_OUT, req->req.buf + req->req.actual,
+				   bufferspace);
+		req->req.actual += bufferspace;
+
+		if (tr < ep0->ep.maxpacket) {
+			/* This is the last packet */
+			done(ep0, req, 0);
+			udc->ep0state = WAIT_FOR_SETUP;
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+/* Must be called with lock */
+static void stop_activity(struct lpc32xx_udc *udc)
+{
+	struct usb_gadget_driver *driver = udc->driver;
+	int i;
+
+	if (udc->gadget.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->suspended = 0;
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		struct lpc32xx_ep *ep = &udc->ep[i];
+		nuke(ep, -ESHUTDOWN);
+	}
+	if (driver) {
+		spin_unlock(&udc->lock);
+		driver->disconnect(&udc->gadget);
+		spin_lock(&udc->lock);
+	}
+
+	isp1301_pullup_enable(udc, 0, 0);
+	udc_disable(udc);
+	udc_reinit(udc);
+}
+
+/*
+ * Activate or kill host pullup
+ * Can be called with or without lock
+ */
+static void pullup(struct lpc32xx_udc *udc, int is_on)
+{
+	if (!udc->clocked)
+		return;
+
+	if (!udc->enabled || !udc->vbus)
+		is_on = 0;
+
+	if (is_on != udc->pullup)
+		isp1301_pullup_enable(udc, is_on, 0);
+}
+
+/* Must be called without lock */
+static int lpc32xx_ep_disable(struct usb_ep *_ep)
+{
+	struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep);
+	struct lpc32xx_udc *udc = ep->udc;
+	unsigned long	flags;
+
+	if ((ep->hwep_num_base == 0) || (ep->hwep_num == 0))
+		return -EINVAL;
+	spin_lock_irqsave(&udc->lock, flags);
+
+	nuke(ep, -ESHUTDOWN);
+
+	/* Clear all DMA statuses for this EP */
+	udc_ep_dma_disable(udc, ep->hwep_num);
+	writel(1 << ep->hwep_num, USBD_EOTINTCLR(udc->udp_baseaddr));
+	writel(1 << ep->hwep_num, USBD_NDDRTINTCLR(udc->udp_baseaddr));
+	writel(1 << ep->hwep_num, USBD_SYSERRTINTCLR(udc->udp_baseaddr));
+	writel(1 << ep->hwep_num, USBD_DMARCLR(udc->udp_baseaddr));
+
+	/* Remove the DD pointer in the UDCA */
+	udc->udca_v_base[ep->hwep_num] = 0;
+
+	/* Disable and reset endpoint and interrupt */
+	uda_clear_hwepint(udc, ep->hwep_num);
+	udc_unrealize_hwep(udc, ep->hwep_num);
+
+	ep->hwep_num = 0;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	atomic_dec(&udc->enabled_ep_cnt);
+	wake_up(&udc->ep_disable_wait_queue);
+
+	return 0;
+}
+
+/* Must be called without lock */
+static int lpc32xx_ep_enable(struct usb_ep *_ep,
+			     const struct usb_endpoint_descriptor *desc)
+{
+	struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep);
+	struct lpc32xx_udc *udc;
+	u16 maxpacket;
+	u32 tmp;
+	unsigned long flags;
+
+	/* Verify EP data */
+	if ((!_ep) || (!ep) || (!desc) ||
+	    (desc->bDescriptorType != USB_DT_ENDPOINT))
+		return -EINVAL;
+
+	udc = ep->udc;
+	maxpacket = usb_endpoint_maxp(desc);
+	if ((maxpacket == 0) || (maxpacket > ep->maxpacket)) {
+		dev_dbg(udc->dev, "bad ep descriptor's packet size\n");
+		return -EINVAL;
+	}
+
+	/* Don't touch EP0 */
+	if (ep->hwep_num_base == 0) {
+		dev_dbg(udc->dev, "Can't re-enable EP0!!!\n");
+		return -EINVAL;
+	}
+
+	/* Is driver ready? */
+	if ((!udc->driver) || (udc->gadget.speed == USB_SPEED_UNKNOWN)) {
+		dev_dbg(udc->dev, "bogus device state\n");
+		return -ESHUTDOWN;
+	}
+
+	tmp = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	switch (tmp) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		return -EINVAL;
+
+	case USB_ENDPOINT_XFER_INT:
+		if (maxpacket > ep->maxpacket) {
+			dev_dbg(udc->dev,
+				"Bad INT endpoint maxpacket %d\n", maxpacket);
+			return -EINVAL;
+		}
+		break;
+
+	case USB_ENDPOINT_XFER_BULK:
+		switch (maxpacket) {
+		case 8:
+		case 16:
+		case 32:
+		case 64:
+			break;
+
+		default:
+			dev_dbg(udc->dev,
+				"Bad BULK endpoint maxpacket %d\n", maxpacket);
+			return -EINVAL;
+		}
+		break;
+
+	case USB_ENDPOINT_XFER_ISOC:
+		break;
+	}
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* Initialize endpoint to match the selected descriptor */
+	ep->is_in = (desc->bEndpointAddress & USB_DIR_IN) != 0;
+	ep->ep.maxpacket = maxpacket;
+
+	/* Map hardware endpoint from base and direction */
+	if (ep->is_in)
+		/* IN endpoints are offset 1 from the OUT endpoint */
+		ep->hwep_num = ep->hwep_num_base + EP_IN;
+	else
+		ep->hwep_num = ep->hwep_num_base;
+
+	ep_dbg(ep, "EP enabled: %s, HW:%d, MP:%d IN:%d\n", ep->ep.name,
+	       ep->hwep_num, maxpacket, (ep->is_in == 1));
+
+	/* Realize the endpoint, interrupt is enabled later when
+	 * buffers are queued, IN EPs will NAK until buffers are ready */
+	udc_realize_hwep(udc, ep->hwep_num, ep->ep.maxpacket);
+	udc_clr_buffer_hwep(udc, ep->hwep_num);
+	uda_disable_hwepint(udc, ep->hwep_num);
+	udc_clrstall_hwep(udc, ep->hwep_num);
+
+	/* Clear all DMA statuses for this EP */
+	udc_ep_dma_disable(udc, ep->hwep_num);
+	writel(1 << ep->hwep_num, USBD_EOTINTCLR(udc->udp_baseaddr));
+	writel(1 << ep->hwep_num, USBD_NDDRTINTCLR(udc->udp_baseaddr));
+	writel(1 << ep->hwep_num, USBD_SYSERRTINTCLR(udc->udp_baseaddr));
+	writel(1 << ep->hwep_num, USBD_DMARCLR(udc->udp_baseaddr));
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	atomic_inc(&udc->enabled_ep_cnt);
+	return 0;
+}
+
+/*
+ * Allocate a USB request list
+ * Can be called with or without lock
+ */
+static struct usb_request *lpc32xx_ep_alloc_request(struct usb_ep *_ep,
+						    gfp_t gfp_flags)
+{
+	struct lpc32xx_request *req;
+
+	req = kzalloc(sizeof(struct lpc32xx_request), gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+	return &req->req;
+}
+
+/*
+ * De-allocate a USB request list
+ * Can be called with or without lock
+ */
+static void lpc32xx_ep_free_request(struct usb_ep *_ep,
+				    struct usb_request *_req)
+{
+	struct lpc32xx_request *req;
+
+	req = container_of(_req, struct lpc32xx_request, req);
+	BUG_ON(!list_empty(&req->queue));
+	kfree(req);
+}
+
+/* Must be called without lock */
+static int lpc32xx_ep_queue(struct usb_ep *_ep,
+			    struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct lpc32xx_request *req;
+	struct lpc32xx_ep *ep;
+	struct lpc32xx_udc *udc;
+	unsigned long flags;
+	int status = 0;
+
+	req = container_of(_req, struct lpc32xx_request, req);
+	ep = container_of(_ep, struct lpc32xx_ep, ep);
+
+	if (!_ep || !_req || !_req->complete || !_req->buf ||
+	    !list_empty(&req->queue))
+		return -EINVAL;
+
+	udc = ep->udc;
+
+	if (udc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -EPIPE;
+
+	if (ep->lep) {
+		struct lpc32xx_usbd_dd_gad *dd;
+
+		status = usb_gadget_map_request(&udc->gadget, _req, ep->is_in);
+		if (status)
+			return status;
+
+		/* For the request, build a list of DDs */
+		dd = udc_dd_alloc(udc);
+		if (!dd) {
+			/* Error allocating DD */
+			return -ENOMEM;
+		}
+		req->dd_desc_ptr = dd;
+
+		/* Setup the DMA descriptor */
+		dd->dd_next_phy = dd->dd_next_v = 0;
+		dd->dd_buffer_addr = req->req.dma;
+		dd->dd_status = 0;
+
+		/* Special handling for ISO EPs */
+		if (ep->eptype == EP_ISO_TYPE) {
+			dd->dd_setup = DD_SETUP_ISO_EP |
+				DD_SETUP_PACKETLEN(0) |
+				DD_SETUP_DMALENBYTES(1);
+			dd->dd_iso_ps_mem_addr = dd->this_dma + 24;
+			if (ep->is_in)
+				dd->iso_status[0] = req->req.length;
+			else
+				dd->iso_status[0] = 0;
+		} else
+			dd->dd_setup = DD_SETUP_PACKETLEN(ep->ep.maxpacket) |
+				DD_SETUP_DMALENBYTES(req->req.length);
+	}
+
+	ep_dbg(ep, "%s queue req %p len %d buf %p (in=%d) z=%d\n", _ep->name,
+	       _req, _req->length, _req->buf, ep->is_in, _req->zero);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+	req->send_zlp = _req->zero;
+
+	/* Kickstart empty queues */
+	if (list_empty(&ep->queue)) {
+		list_add_tail(&req->queue, &ep->queue);
+
+		if (ep->hwep_num_base == 0) {
+			/* Handle expected data direction */
+			if (ep->is_in) {
+				/* IN packet to host */
+				udc->ep0state = DATA_IN;
+				status = udc_ep0_in_req(udc);
+			} else {
+				/* OUT packet from host */
+				udc->ep0state = DATA_OUT;
+				status = udc_ep0_out_req(udc);
+			}
+		} else if (ep->is_in) {
+			/* IN packet to host and kick off transfer */
+			if (!ep->req_pending)
+				udc_ep_in_req_dma(udc, ep);
+		} else
+			/* OUT packet from host and kick off list */
+			if (!ep->req_pending)
+				udc_ep_out_req_dma(udc, ep);
+	} else
+		list_add_tail(&req->queue, &ep->queue);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return (status < 0) ? status : 0;
+}
+
+/* Must be called without lock */
+static int lpc32xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct lpc32xx_ep *ep;
+	struct lpc32xx_request *req = NULL, *iter;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct lpc32xx_ep, ep);
+	if (!_ep || ep->hwep_num_base == 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		req = iter;
+		break;
+	}
+	if (!req) {
+		spin_unlock_irqrestore(&ep->udc->lock, flags);
+		return -EINVAL;
+	}
+
+	done(ep, req, -ECONNRESET);
+
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+
+	return 0;
+}
+
+/* Must be called without lock */
+static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep);
+	struct lpc32xx_udc *udc;
+	unsigned long flags;
+
+	if ((!ep) || (ep->hwep_num <= 1))
+		return -EINVAL;
+
+	/* Don't halt an IN EP */
+	if (ep->is_in)
+		return -EAGAIN;
+
+	udc = ep->udc;
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (value == 1) {
+		/* stall */
+		udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(ep->hwep_num),
+					DAT_WR_BYTE(EP_STAT_ST));
+	} else {
+		/* End stall */
+		ep->wedge = 0;
+		udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(ep->hwep_num),
+					DAT_WR_BYTE(0));
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/* set the halt feature and ignores clear requests */
+static int lpc32xx_ep_set_wedge(struct usb_ep *_ep)
+{
+	struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep);
+
+	if (!_ep || !ep->udc)
+		return -EINVAL;
+
+	ep->wedge = 1;
+
+	return usb_ep_set_halt(_ep);
+}
+
+static const struct usb_ep_ops lpc32xx_ep_ops = {
+	.enable		= lpc32xx_ep_enable,
+	.disable	= lpc32xx_ep_disable,
+	.alloc_request	= lpc32xx_ep_alloc_request,
+	.free_request	= lpc32xx_ep_free_request,
+	.queue		= lpc32xx_ep_queue,
+	.dequeue	= lpc32xx_ep_dequeue,
+	.set_halt	= lpc32xx_ep_set_halt,
+	.set_wedge	= lpc32xx_ep_set_wedge,
+};
+
+/* Send a ZLP on a non-0 IN EP */
+static void udc_send_in_zlp(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
+{
+	/* Clear EP status */
+	udc_clearep_getsts(udc, ep->hwep_num);
+
+	/* Send ZLP via FIFO mechanism */
+	udc_write_hwep(udc, ep->hwep_num, NULL, 0);
+}
+
+/*
+ * Handle EP completion for ZLP
+ * This function will only be called when a delayed ZLP needs to be sent out
+ * after a DMA transfer has filled both buffers.
+ */
+static void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
+{
+	u32 epstatus;
+	struct lpc32xx_request *req;
+
+	if (ep->hwep_num <= 0)
+		return;
+
+	uda_clear_hwepint(udc, ep->hwep_num);
+
+	/* If this interrupt isn't enabled, return now */
+	if (!(udc->enabled_hwepints & (1 << ep->hwep_num)))
+		return;
+
+	/* Get endpoint status */
+	epstatus = udc_clearep_getsts(udc, ep->hwep_num);
+
+	/*
+	 * This should never happen, but protect against writing to the
+	 * buffer when full.
+	 */
+	if (epstatus & EP_SEL_F)
+		return;
+
+	if (ep->is_in) {
+		udc_send_in_zlp(udc, ep);
+		uda_disable_hwepint(udc, ep->hwep_num);
+	} else
+		return;
+
+	/* If there isn't a request waiting, something went wrong */
+	req = list_entry(ep->queue.next, struct lpc32xx_request, queue);
+	if (req) {
+		done(ep, req, 0);
+
+		/* Start another request if ready */
+		if (!list_empty(&ep->queue)) {
+			if (ep->is_in)
+				udc_ep_in_req_dma(udc, ep);
+			else
+				udc_ep_out_req_dma(udc, ep);
+		} else
+			ep->req_pending = 0;
+	}
+}
+
+
+/* DMA end of transfer completion */
+static void udc_handle_dma_ep(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
+{
+	u32 status;
+	struct lpc32xx_request *req;
+	struct lpc32xx_usbd_dd_gad *dd;
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+	ep->totalints++;
+#endif
+
+	req = list_entry(ep->queue.next, struct lpc32xx_request, queue);
+	if (!req) {
+		ep_err(ep, "DMA interrupt on no req!\n");
+		return;
+	}
+	dd = req->dd_desc_ptr;
+
+	/* DMA descriptor should always be retired for this call */
+	if (!(dd->dd_status & DD_STATUS_DD_RETIRED))
+		ep_warn(ep, "DMA descriptor did not retire\n");
+
+	/* Disable DMA */
+	udc_ep_dma_disable(udc, ep->hwep_num);
+	writel((1 << ep->hwep_num), USBD_EOTINTCLR(udc->udp_baseaddr));
+	writel((1 << ep->hwep_num), USBD_NDDRTINTCLR(udc->udp_baseaddr));
+
+	/* System error? */
+	if (readl(USBD_SYSERRTINTST(udc->udp_baseaddr)) &
+	    (1 << ep->hwep_num)) {
+		writel((1 << ep->hwep_num),
+			     USBD_SYSERRTINTCLR(udc->udp_baseaddr));
+		ep_err(ep, "AHB critical error!\n");
+		ep->req_pending = 0;
+
+		/* The error could have occurred on a packet of a multipacket
+		 * transfer, so recovering the transfer is not possible. Close
+		 * the request with an error */
+		done(ep, req, -ECONNABORTED);
+		return;
+	}
+
+	/* Handle the current DD's status */
+	status = dd->dd_status;
+	switch (status & DD_STATUS_STS_MASK) {
+	case DD_STATUS_STS_NS:
+		/* DD not serviced? This shouldn't happen! */
+		ep->req_pending = 0;
+		ep_err(ep, "DMA critical EP error: DD not serviced (0x%x)!\n",
+		       status);
+
+		done(ep, req, -ECONNABORTED);
+		return;
+
+	case DD_STATUS_STS_BS:
+		/* Interrupt only fires on EOT - This shouldn't happen! */
+		ep->req_pending = 0;
+		ep_err(ep, "DMA critical EP error: EOT prior to service completion (0x%x)!\n",
+		       status);
+		done(ep, req, -ECONNABORTED);
+		return;
+
+	case DD_STATUS_STS_NC:
+	case DD_STATUS_STS_DUR:
+		/* Really just a short packet, not an underrun */
+		/* This is a good status and what we expect */
+		break;
+
+	default:
+		/* Data overrun, system error, or unknown */
+		ep->req_pending = 0;
+		ep_err(ep, "DMA critical EP error: System error (0x%x)!\n",
+		       status);
+		done(ep, req, -ECONNABORTED);
+		return;
+	}
+
+	/* ISO endpoints are handled differently */
+	if (ep->eptype == EP_ISO_TYPE) {
+		if (ep->is_in)
+			req->req.actual = req->req.length;
+		else
+			req->req.actual = dd->iso_status[0] & 0xFFFF;
+	} else
+		req->req.actual += DD_STATUS_CURDMACNT(status);
+
+	/* Send a ZLP if necessary. This will be done for non-int
+	 * packets which have a size that is a divisor of MAXP */
+	if (req->send_zlp) {
+		/*
+		 * If at least 1 buffer is available, send the ZLP now.
+		 * Otherwise, the ZLP send needs to be deferred until a
+		 * buffer is available.
+		 */
+		if (udc_clearep_getsts(udc, ep->hwep_num) & EP_SEL_F) {
+			udc_clearep_getsts(udc, ep->hwep_num);
+			uda_enable_hwepint(udc, ep->hwep_num);
+			udc_clearep_getsts(udc, ep->hwep_num);
+
+			/* Let the EP interrupt handle the ZLP */
+			return;
+		} else
+			udc_send_in_zlp(udc, ep);
+	}
+
+	/* Transfer request is complete */
+	done(ep, req, 0);
+
+	/* Start another request if ready */
+	udc_clearep_getsts(udc, ep->hwep_num);
+	if (!list_empty((&ep->queue))) {
+		if (ep->is_in)
+			udc_ep_in_req_dma(udc, ep);
+		else
+			udc_ep_out_req_dma(udc, ep);
+	} else
+		ep->req_pending = 0;
+
+}
+
+/*
+ *
+ * Endpoint 0 functions
+ *
+ */
+static void udc_handle_dev(struct lpc32xx_udc *udc)
+{
+	u32 tmp;
+
+	udc_protocol_cmd_w(udc, CMD_GET_DEV_STAT);
+	tmp = udc_protocol_cmd_r(udc, DAT_GET_DEV_STAT);
+
+	if (tmp & DEV_RST)
+		uda_usb_reset(udc);
+	else if (tmp & DEV_CON_CH)
+		uda_power_event(udc, (tmp & DEV_CON));
+	else if (tmp & DEV_SUS_CH) {
+		if (tmp & DEV_SUS) {
+			if (udc->vbus == 0)
+				stop_activity(udc);
+			else if ((udc->gadget.speed != USB_SPEED_UNKNOWN) &&
+				 udc->driver) {
+				/* Power down transceiver */
+				udc->poweron = 0;
+				schedule_work(&udc->pullup_job);
+				uda_resm_susp_event(udc, 1);
+			}
+		} else if ((udc->gadget.speed != USB_SPEED_UNKNOWN) &&
+			   udc->driver && udc->vbus) {
+			uda_resm_susp_event(udc, 0);
+			/* Power up transceiver */
+			udc->poweron = 1;
+			schedule_work(&udc->pullup_job);
+		}
+	}
+}
+
+static int udc_get_status(struct lpc32xx_udc *udc, u16 reqtype, u16 wIndex)
+{
+	struct lpc32xx_ep *ep;
+	u32 ep0buff = 0, tmp;
+
+	switch (reqtype & USB_RECIP_MASK) {
+	case USB_RECIP_INTERFACE:
+		break; /* Not supported */
+
+	case USB_RECIP_DEVICE:
+		ep0buff = udc->gadget.is_selfpowered;
+		if (udc->dev_status & (1 << USB_DEVICE_REMOTE_WAKEUP))
+			ep0buff |= (1 << USB_DEVICE_REMOTE_WAKEUP);
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		tmp = wIndex & USB_ENDPOINT_NUMBER_MASK;
+		ep = &udc->ep[tmp];
+		if ((tmp == 0) || (tmp >= NUM_ENDPOINTS))
+			return -EOPNOTSUPP;
+
+		if (wIndex & USB_DIR_IN) {
+			if (!ep->is_in)
+				return -EOPNOTSUPP; /* Something's wrong */
+		} else if (ep->is_in)
+			return -EOPNOTSUPP; /* Not an IN endpoint */
+
+		/* Get status of the endpoint */
+		udc_protocol_cmd_w(udc, CMD_SEL_EP(ep->hwep_num));
+		tmp = udc_protocol_cmd_r(udc, DAT_SEL_EP(ep->hwep_num));
+
+		if (tmp & EP_SEL_ST)
+			ep0buff = (1 << USB_ENDPOINT_HALT);
+		else
+			ep0buff = 0;
+		break;
+
+	default:
+		break;
+	}
+
+	/* Return data */
+	udc_write_hwep(udc, EP_IN, &ep0buff, 2);
+
+	return 0;
+}
+
+static void udc_handle_ep0_setup(struct lpc32xx_udc *udc)
+{
+	struct lpc32xx_ep *ep, *ep0 = &udc->ep[0];
+	struct usb_ctrlrequest ctrlpkt;
+	int i, bytes;
+	u16 wIndex, wValue, reqtype, req, tmp;
+
+	/* Nuke previous transfers */
+	nuke(ep0, -EPROTO);
+
+	/* Get setup packet */
+	bytes = udc_read_hwep(udc, EP_OUT, (u32 *) &ctrlpkt, 8);
+	if (bytes != 8) {
+		ep_warn(ep0, "Incorrectly sized setup packet (s/b 8, is %d)!\n",
+			bytes);
+		return;
+	}
+
+	/* Native endianness */
+	wIndex = le16_to_cpu(ctrlpkt.wIndex);
+	wValue = le16_to_cpu(ctrlpkt.wValue);
+	reqtype = le16_to_cpu(ctrlpkt.bRequestType);
+
+	/* Set direction of EP0 */
+	if (likely(reqtype & USB_DIR_IN))
+		ep0->is_in = 1;
+	else
+		ep0->is_in = 0;
+
+	/* Handle SETUP packet */
+	req = le16_to_cpu(ctrlpkt.bRequest);
+	switch (req) {
+	case USB_REQ_CLEAR_FEATURE:
+	case USB_REQ_SET_FEATURE:
+		switch (reqtype) {
+		case (USB_TYPE_STANDARD | USB_RECIP_DEVICE):
+			if (wValue != USB_DEVICE_REMOTE_WAKEUP)
+				goto stall; /* Nothing else handled */
+
+			/* Tell board about event */
+			if (req == USB_REQ_CLEAR_FEATURE)
+				udc->dev_status &=
+					~(1 << USB_DEVICE_REMOTE_WAKEUP);
+			else
+				udc->dev_status |=
+					(1 << USB_DEVICE_REMOTE_WAKEUP);
+			uda_remwkp_cgh(udc);
+			goto zlp_send;
+
+		case (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT):
+			tmp = wIndex & USB_ENDPOINT_NUMBER_MASK;
+			if ((wValue != USB_ENDPOINT_HALT) ||
+			    (tmp >= NUM_ENDPOINTS))
+				break;
+
+			/* Find hardware endpoint from logical endpoint */
+			ep = &udc->ep[tmp];
+			tmp = ep->hwep_num;
+			if (tmp == 0)
+				break;
+
+			if (req == USB_REQ_SET_FEATURE)
+				udc_stall_hwep(udc, tmp);
+			else if (!ep->wedge)
+				udc_clrstall_hwep(udc, tmp);
+
+			goto zlp_send;
+
+		default:
+			break;
+		}
+		break;
+
+	case USB_REQ_SET_ADDRESS:
+		if (reqtype == (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) {
+			udc_set_address(udc, wValue);
+			goto zlp_send;
+		}
+		break;
+
+	case USB_REQ_GET_STATUS:
+		udc_get_status(udc, reqtype, wIndex);
+		return;
+
+	default:
+		break; /* Let GadgetFS handle the descriptor instead */
+	}
+
+	if (likely(udc->driver)) {
+		/* device-2-host (IN) or no data setup command, process
+		 * immediately */
+		spin_unlock(&udc->lock);
+		i = udc->driver->setup(&udc->gadget, &ctrlpkt);
+
+		spin_lock(&udc->lock);
+		if (req == USB_REQ_SET_CONFIGURATION) {
+			/* Configuration is set after endpoints are realized */
+			if (wValue) {
+				/* Set configuration */
+				udc_set_device_configured(udc);
+
+				udc_protocol_cmd_data_w(udc, CMD_SET_MODE,
+							DAT_WR_BYTE(AP_CLK |
+							INAK_BI | INAK_II));
+			} else {
+				/* Clear configuration */
+				udc_set_device_unconfigured(udc);
+
+				/* Disable NAK interrupts */
+				udc_protocol_cmd_data_w(udc, CMD_SET_MODE,
+							DAT_WR_BYTE(AP_CLK));
+			}
+		}
+
+		if (i < 0) {
+			/* setup processing failed, force stall */
+			dev_dbg(udc->dev,
+				"req %02x.%02x protocol STALL; stat %d\n",
+				reqtype, req, i);
+			udc->ep0state = WAIT_FOR_SETUP;
+			goto stall;
+		}
+	}
+
+	if (!ep0->is_in)
+		udc_ep0_send_zlp(udc); /* ZLP IN packet on data phase */
+
+	return;
+
+stall:
+	udc_stall_hwep(udc, EP_IN);
+	return;
+
+zlp_send:
+	udc_ep0_send_zlp(udc);
+	return;
+}
+
+/* IN endpoint 0 transfer */
+static void udc_handle_ep0_in(struct lpc32xx_udc *udc)
+{
+	struct lpc32xx_ep *ep0 = &udc->ep[0];
+	u32 epstatus;
+
+	/* Clear EP interrupt */
+	epstatus = udc_clearep_getsts(udc, EP_IN);
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+	ep0->totalints++;
+#endif
+
+	/* Stalled? Clear stall and reset buffers */
+	if (epstatus & EP_SEL_ST) {
+		udc_clrstall_hwep(udc, EP_IN);
+		nuke(ep0, -ECONNABORTED);
+		udc->ep0state = WAIT_FOR_SETUP;
+		return;
+	}
+
+	/* Is a buffer available? */
+	if (!(epstatus & EP_SEL_F)) {
+		/* Handle based on current state */
+		if (udc->ep0state == DATA_IN)
+			udc_ep0_in_req(udc);
+		else {
+			/* Unknown state for EP0 oe end of DATA IN phase */
+			nuke(ep0, -ECONNABORTED);
+			udc->ep0state = WAIT_FOR_SETUP;
+		}
+	}
+}
+
+/* OUT endpoint 0 transfer */
+static void udc_handle_ep0_out(struct lpc32xx_udc *udc)
+{
+	struct lpc32xx_ep *ep0 = &udc->ep[0];
+	u32 epstatus;
+
+	/* Clear EP interrupt */
+	epstatus = udc_clearep_getsts(udc, EP_OUT);
+
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+	ep0->totalints++;
+#endif
+
+	/* Stalled? */
+	if (epstatus & EP_SEL_ST) {
+		udc_clrstall_hwep(udc, EP_OUT);
+		nuke(ep0, -ECONNABORTED);
+		udc->ep0state = WAIT_FOR_SETUP;
+		return;
+	}
+
+	/* A NAK may occur if a packet couldn't be received yet */
+	if (epstatus & EP_SEL_EPN)
+		return;
+	/* Setup packet incoming? */
+	if (epstatus & EP_SEL_STP) {
+		nuke(ep0, 0);
+		udc->ep0state = WAIT_FOR_SETUP;
+	}
+
+	/* Data available? */
+	if (epstatus & EP_SEL_F)
+		/* Handle based on current state */
+		switch (udc->ep0state) {
+		case WAIT_FOR_SETUP:
+			udc_handle_ep0_setup(udc);
+			break;
+
+		case DATA_OUT:
+			udc_ep0_out_req(udc);
+			break;
+
+		default:
+			/* Unknown state for EP0 */
+			nuke(ep0, -ECONNABORTED);
+			udc->ep0state = WAIT_FOR_SETUP;
+		}
+}
+
+/* Must be called without lock */
+static int lpc32xx_get_frame(struct usb_gadget *gadget)
+{
+	int frame;
+	unsigned long flags;
+	struct lpc32xx_udc *udc = to_udc(gadget);
+
+	if (!udc->clocked)
+		return -EINVAL;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	frame = (int) udc_get_current_frame(udc);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return frame;
+}
+
+static int lpc32xx_wakeup(struct usb_gadget *gadget)
+{
+	return -ENOTSUPP;
+}
+
+static int lpc32xx_set_selfpowered(struct usb_gadget *gadget, int is_on)
+{
+	gadget->is_selfpowered = (is_on != 0);
+
+	return 0;
+}
+
+/*
+ * vbus is here!  turn everything on that's ready
+ * Must be called without lock
+ */
+static int lpc32xx_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	unsigned long flags;
+	struct lpc32xx_udc *udc = to_udc(gadget);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* Doesn't need lock */
+	if (udc->driver) {
+		udc_clk_set(udc, 1);
+		udc_enable(udc);
+		pullup(udc, is_active);
+	} else {
+		stop_activity(udc);
+		pullup(udc, 0);
+
+		spin_unlock_irqrestore(&udc->lock, flags);
+		/*
+		 *  Wait for all the endpoints to disable,
+		 *  before disabling clocks. Don't wait if
+		 *  endpoints are not enabled.
+		 */
+		if (atomic_read(&udc->enabled_ep_cnt))
+			wait_event_interruptible(udc->ep_disable_wait_queue,
+				 (atomic_read(&udc->enabled_ep_cnt) == 0));
+
+		spin_lock_irqsave(&udc->lock, flags);
+
+		udc_clk_set(udc, 0);
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/* Can be called with or without lock */
+static int lpc32xx_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct lpc32xx_udc *udc = to_udc(gadget);
+
+	/* Doesn't need lock */
+	pullup(udc, is_on);
+
+	return 0;
+}
+
+static int lpc32xx_start(struct usb_gadget *, struct usb_gadget_driver *);
+static int lpc32xx_stop(struct usb_gadget *);
+
+static const struct usb_gadget_ops lpc32xx_udc_ops = {
+	.get_frame		= lpc32xx_get_frame,
+	.wakeup			= lpc32xx_wakeup,
+	.set_selfpowered	= lpc32xx_set_selfpowered,
+	.vbus_session		= lpc32xx_vbus_session,
+	.pullup			= lpc32xx_pullup,
+	.udc_start		= lpc32xx_start,
+	.udc_stop		= lpc32xx_stop,
+};
+
+static void nop_release(struct device *dev)
+{
+	/* nothing to free */
+}
+
+static const struct lpc32xx_udc controller_template = {
+	.gadget = {
+		.ops	= &lpc32xx_udc_ops,
+		.name	= driver_name,
+		.dev	= {
+			.init_name = "gadget",
+			.release = nop_release,
+		}
+	},
+	.ep[0] = {
+		.ep = {
+			.name	= "ep0",
+			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL,
+					USB_EP_CAPS_DIR_ALL),
+		},
+		.maxpacket	= 64,
+		.hwep_num_base	= 0,
+		.hwep_num	= 0, /* Can be 0 or 1, has special handling */
+		.lep		= 0,
+		.eptype		= EP_CTL_TYPE,
+	},
+	.ep[1] = {
+		.ep = {
+			.name	= "ep1-int",
+			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+					USB_EP_CAPS_DIR_ALL),
+		},
+		.maxpacket	= 64,
+		.hwep_num_base	= 2,
+		.hwep_num	= 0, /* 2 or 3, will be set later */
+		.lep		= 1,
+		.eptype		= EP_INT_TYPE,
+	},
+	.ep[2] = {
+		.ep = {
+			.name	= "ep2-bulk",
+			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+					USB_EP_CAPS_DIR_ALL),
+		},
+		.maxpacket	= 64,
+		.hwep_num_base	= 4,
+		.hwep_num	= 0, /* 4 or 5, will be set later */
+		.lep		= 2,
+		.eptype		= EP_BLK_TYPE,
+	},
+	.ep[3] = {
+		.ep = {
+			.name	= "ep3-iso",
+			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+					USB_EP_CAPS_DIR_ALL),
+		},
+		.maxpacket	= 1023,
+		.hwep_num_base	= 6,
+		.hwep_num	= 0, /* 6 or 7, will be set later */
+		.lep		= 3,
+		.eptype		= EP_ISO_TYPE,
+	},
+	.ep[4] = {
+		.ep = {
+			.name	= "ep4-int",
+			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+					USB_EP_CAPS_DIR_ALL),
+		},
+		.maxpacket	= 64,
+		.hwep_num_base	= 8,
+		.hwep_num	= 0, /* 8 or 9, will be set later */
+		.lep		= 4,
+		.eptype		= EP_INT_TYPE,
+	},
+	.ep[5] = {
+		.ep = {
+			.name	= "ep5-bulk",
+			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+					USB_EP_CAPS_DIR_ALL),
+		},
+		.maxpacket	= 64,
+		.hwep_num_base	= 10,
+		.hwep_num	= 0, /* 10 or 11, will be set later */
+		.lep		= 5,
+		.eptype		= EP_BLK_TYPE,
+	},
+	.ep[6] = {
+		.ep = {
+			.name	= "ep6-iso",
+			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+					USB_EP_CAPS_DIR_ALL),
+		},
+		.maxpacket	= 1023,
+		.hwep_num_base	= 12,
+		.hwep_num	= 0, /* 12 or 13, will be set later */
+		.lep		= 6,
+		.eptype		= EP_ISO_TYPE,
+	},
+	.ep[7] = {
+		.ep = {
+			.name	= "ep7-int",
+			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+					USB_EP_CAPS_DIR_ALL),
+		},
+		.maxpacket	= 64,
+		.hwep_num_base	= 14,
+		.hwep_num	= 0,
+		.lep		= 7,
+		.eptype		= EP_INT_TYPE,
+	},
+	.ep[8] = {
+		.ep = {
+			.name	= "ep8-bulk",
+			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+					USB_EP_CAPS_DIR_ALL),
+		},
+		.maxpacket	= 64,
+		.hwep_num_base	= 16,
+		.hwep_num	= 0,
+		.lep		= 8,
+		.eptype		= EP_BLK_TYPE,
+	},
+	.ep[9] = {
+		.ep = {
+			.name	= "ep9-iso",
+			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+					USB_EP_CAPS_DIR_ALL),
+		},
+		.maxpacket	= 1023,
+		.hwep_num_base	= 18,
+		.hwep_num	= 0,
+		.lep		= 9,
+		.eptype		= EP_ISO_TYPE,
+	},
+	.ep[10] = {
+		.ep = {
+			.name	= "ep10-int",
+			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+					USB_EP_CAPS_DIR_ALL),
+		},
+		.maxpacket	= 64,
+		.hwep_num_base	= 20,
+		.hwep_num	= 0,
+		.lep		= 10,
+		.eptype		= EP_INT_TYPE,
+	},
+	.ep[11] = {
+		.ep = {
+			.name	= "ep11-bulk",
+			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+					USB_EP_CAPS_DIR_ALL),
+		},
+		.maxpacket	= 64,
+		.hwep_num_base	= 22,
+		.hwep_num	= 0,
+		.lep		= 11,
+		.eptype		= EP_BLK_TYPE,
+	},
+	.ep[12] = {
+		.ep = {
+			.name	= "ep12-iso",
+			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+					USB_EP_CAPS_DIR_ALL),
+		},
+		.maxpacket	= 1023,
+		.hwep_num_base	= 24,
+		.hwep_num	= 0,
+		.lep		= 12,
+		.eptype		= EP_ISO_TYPE,
+	},
+	.ep[13] = {
+		.ep = {
+			.name	= "ep13-int",
+			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+					USB_EP_CAPS_DIR_ALL),
+		},
+		.maxpacket	= 64,
+		.hwep_num_base	= 26,
+		.hwep_num	= 0,
+		.lep		= 13,
+		.eptype		= EP_INT_TYPE,
+	},
+	.ep[14] = {
+		.ep = {
+			.name	= "ep14-bulk",
+			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+					USB_EP_CAPS_DIR_ALL),
+		},
+		.maxpacket	= 64,
+		.hwep_num_base	= 28,
+		.hwep_num	= 0,
+		.lep		= 14,
+		.eptype		= EP_BLK_TYPE,
+	},
+	.ep[15] = {
+		.ep = {
+			.name	= "ep15-bulk",
+			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+					USB_EP_CAPS_DIR_ALL),
+		},
+		.maxpacket	= 1023,
+		.hwep_num_base	= 30,
+		.hwep_num	= 0,
+		.lep		= 15,
+		.eptype		= EP_BLK_TYPE,
+	},
+};
+
+/* ISO and status interrupts */
+static irqreturn_t lpc32xx_usb_lp_irq(int irq, void *_udc)
+{
+	u32 tmp, devstat;
+	struct lpc32xx_udc *udc = _udc;
+
+	spin_lock(&udc->lock);
+
+	/* Read the device status register */
+	devstat = readl(USBD_DEVINTST(udc->udp_baseaddr));
+
+	devstat &= ~USBD_EP_FAST;
+	writel(devstat, USBD_DEVINTCLR(udc->udp_baseaddr));
+	devstat = devstat & udc->enabled_devints;
+
+	/* Device specific handling needed? */
+	if (devstat & USBD_DEV_STAT)
+		udc_handle_dev(udc);
+
+	/* Start of frame? (devstat & FRAME_INT):
+	 * The frame interrupt isn't really needed for ISO support,
+	 * as the driver will queue the necessary packets */
+
+	/* Error? */
+	if (devstat & ERR_INT) {
+		/* All types of errors, from cable removal during transfer to
+		 * misc protocol and bit errors. These are mostly for just info,
+		 * as the USB hardware will work around these. If these errors
+		 * happen alot, something is wrong. */
+		udc_protocol_cmd_w(udc, CMD_RD_ERR_STAT);
+		tmp = udc_protocol_cmd_r(udc, DAT_RD_ERR_STAT);
+		dev_dbg(udc->dev, "Device error (0x%x)!\n", tmp);
+	}
+
+	spin_unlock(&udc->lock);
+
+	return IRQ_HANDLED;
+}
+
+/* EP interrupts */
+static irqreturn_t lpc32xx_usb_hp_irq(int irq, void *_udc)
+{
+	u32 tmp;
+	struct lpc32xx_udc *udc = _udc;
+
+	spin_lock(&udc->lock);
+
+	/* Read the device status register */
+	writel(USBD_EP_FAST, USBD_DEVINTCLR(udc->udp_baseaddr));
+
+	/* Endpoints */
+	tmp = readl(USBD_EPINTST(udc->udp_baseaddr));
+
+	/* Special handling for EP0 */
+	if (tmp & (EP_MASK_SEL(0, EP_OUT) | EP_MASK_SEL(0, EP_IN))) {
+		/* Handle EP0 IN */
+		if (tmp & (EP_MASK_SEL(0, EP_IN)))
+			udc_handle_ep0_in(udc);
+
+		/* Handle EP0 OUT */
+		if (tmp & (EP_MASK_SEL(0, EP_OUT)))
+			udc_handle_ep0_out(udc);
+	}
+
+	/* All other EPs */
+	if (tmp & ~(EP_MASK_SEL(0, EP_OUT) | EP_MASK_SEL(0, EP_IN))) {
+		int i;
+
+		/* Handle other EP interrupts */
+		for (i = 1; i < NUM_ENDPOINTS; i++) {
+			if (tmp & (1 << udc->ep[i].hwep_num))
+				udc_handle_eps(udc, &udc->ep[i]);
+		}
+	}
+
+	spin_unlock(&udc->lock);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t lpc32xx_usb_devdma_irq(int irq, void *_udc)
+{
+	struct lpc32xx_udc *udc = _udc;
+
+	int i;
+	u32 tmp;
+
+	spin_lock(&udc->lock);
+
+	/* Handle EP DMA EOT interrupts */
+	tmp = readl(USBD_EOTINTST(udc->udp_baseaddr)) |
+		(readl(USBD_EPDMAST(udc->udp_baseaddr)) &
+		 readl(USBD_NDDRTINTST(udc->udp_baseaddr))) |
+		readl(USBD_SYSERRTINTST(udc->udp_baseaddr));
+	for (i = 1; i < NUM_ENDPOINTS; i++) {
+		if (tmp & (1 << udc->ep[i].hwep_num))
+			udc_handle_dma_ep(udc, &udc->ep[i]);
+	}
+
+	spin_unlock(&udc->lock);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ *
+ * VBUS detection, pullup handler, and Gadget cable state notification
+ *
+ */
+static void vbus_work(struct lpc32xx_udc *udc)
+{
+	u8 value;
+
+	if (udc->enabled != 0) {
+		/* Discharge VBUS real quick */
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DISCHRG);
+
+		/* Give VBUS some time (100mS) to discharge */
+		msleep(100);
+
+		/* Disable VBUS discharge resistor */
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
+			OTG1_VBUS_DISCHRG);
+
+		/* Clear interrupt */
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_INTERRUPT_LATCH |
+			ISP1301_I2C_REG_CLEAR_ADDR, ~0);
+
+		/* Get the VBUS status from the transceiver */
+		value = i2c_smbus_read_byte_data(udc->isp1301_i2c_client,
+						 ISP1301_I2C_INTERRUPT_SOURCE);
+
+		/* VBUS on or off? */
+		if (value & INT_SESS_VLD)
+			udc->vbus = 1;
+		else
+			udc->vbus = 0;
+
+		/* VBUS changed? */
+		if (udc->last_vbus != udc->vbus) {
+			udc->last_vbus = udc->vbus;
+			lpc32xx_vbus_session(&udc->gadget, udc->vbus);
+		}
+	}
+}
+
+static irqreturn_t lpc32xx_usb_vbus_irq(int irq, void *_udc)
+{
+	struct lpc32xx_udc *udc = _udc;
+
+	vbus_work(udc);
+
+	return IRQ_HANDLED;
+}
+
+static int lpc32xx_start(struct usb_gadget *gadget,
+			 struct usb_gadget_driver *driver)
+{
+	struct lpc32xx_udc *udc = to_udc(gadget);
+
+	if (!driver || driver->max_speed < USB_SPEED_FULL || !driver->setup) {
+		dev_err(udc->dev, "bad parameter.\n");
+		return -EINVAL;
+	}
+
+	if (udc->driver) {
+		dev_err(udc->dev, "UDC already has a gadget driver\n");
+		return -EBUSY;
+	}
+
+	udc->driver = driver;
+	udc->gadget.dev.of_node = udc->dev->of_node;
+	udc->enabled = 1;
+	udc->gadget.is_selfpowered = 1;
+	udc->vbus = 0;
+
+	/* Force VBUS process once to check for cable insertion */
+	udc->last_vbus = udc->vbus = 0;
+	vbus_work(udc);
+
+	/* enable interrupts */
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_FALLING, INT_SESS_VLD | INT_VBUS_VLD);
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_RISING, INT_SESS_VLD | INT_VBUS_VLD);
+
+	return 0;
+}
+
+static int lpc32xx_stop(struct usb_gadget *gadget)
+{
+	struct lpc32xx_udc *udc = to_udc(gadget);
+
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
+
+	if (udc->clocked) {
+		spin_lock(&udc->lock);
+		stop_activity(udc);
+		spin_unlock(&udc->lock);
+
+		/*
+		 *  Wait for all the endpoints to disable,
+		 *  before disabling clocks. Don't wait if
+		 *  endpoints are not enabled.
+		 */
+		if (atomic_read(&udc->enabled_ep_cnt))
+			wait_event_interruptible(udc->ep_disable_wait_queue,
+				(atomic_read(&udc->enabled_ep_cnt) == 0));
+
+		spin_lock(&udc->lock);
+		udc_clk_set(udc, 0);
+		spin_unlock(&udc->lock);
+	}
+
+	udc->enabled = 0;
+	udc->driver = NULL;
+
+	return 0;
+}
+
+static void lpc32xx_udc_shutdown(struct platform_device *dev)
+{
+	/* Force disconnect on reboot */
+	struct lpc32xx_udc *udc = platform_get_drvdata(dev);
+
+	pullup(udc, 0);
+}
+
+/*
+ * Callbacks to be overridden by options passed via OF (TODO)
+ */
+
+static void lpc32xx_usbd_conn_chg(int conn)
+{
+	/* Do nothing, it might be nice to enable an LED
+	 * based on conn state being !0 */
+}
+
+static void lpc32xx_usbd_susp_chg(int susp)
+{
+	/* Device suspend if susp != 0 */
+}
+
+static void lpc32xx_rmwkup_chg(int remote_wakup_enable)
+{
+	/* Enable or disable USB remote wakeup */
+}
+
+static struct lpc32xx_usbd_cfg lpc32xx_usbddata = {
+	.vbus_drv_pol = 0,
+	.conn_chgb = &lpc32xx_usbd_conn_chg,
+	.susp_chgb = &lpc32xx_usbd_susp_chg,
+	.rmwk_chgb = &lpc32xx_rmwkup_chg,
+};
+
+
+static u64 lpc32xx_usbd_dmamask = ~(u32) 0x7F;
+
+static int lpc32xx_udc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct lpc32xx_udc *udc;
+	int retval, i;
+	dma_addr_t dma_handle;
+	struct device_node *isp1301_node;
+
+	udc = devm_kmemdup(dev, &controller_template, sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
+
+	for (i = 0; i <= 15; i++)
+		udc->ep[i].udc = udc;
+	udc->gadget.ep0 = &udc->ep[0].ep;
+
+	/* init software state */
+	udc->gadget.dev.parent = dev;
+	udc->pdev = pdev;
+	udc->dev = &pdev->dev;
+	udc->enabled = 0;
+
+	if (pdev->dev.of_node) {
+		isp1301_node = of_parse_phandle(pdev->dev.of_node,
+						"transceiver", 0);
+	} else {
+		isp1301_node = NULL;
+	}
+
+	udc->isp1301_i2c_client = isp1301_get_client(isp1301_node);
+	of_node_put(isp1301_node);
+	if (!udc->isp1301_i2c_client) {
+		return -EPROBE_DEFER;
+	}
+
+	dev_info(udc->dev, "ISP1301 I2C device at address 0x%x\n",
+		 udc->isp1301_i2c_client->addr);
+
+	pdev->dev.dma_mask = &lpc32xx_usbd_dmamask;
+	retval = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+	if (retval)
+		return retval;
+
+	udc->board = &lpc32xx_usbddata;
+
+	/*
+	 * Resources are mapped as follows:
+	 *  IORESOURCE_MEM, base address and size of USB space
+	 *  IORESOURCE_IRQ, USB device low priority interrupt number
+	 *  IORESOURCE_IRQ, USB device high priority interrupt number
+	 *  IORESOURCE_IRQ, USB device interrupt number
+	 *  IORESOURCE_IRQ, USB transceiver interrupt number
+	 */
+
+	spin_lock_init(&udc->lock);
+
+	/* Get IRQs */
+	for (i = 0; i < 4; i++) {
+		udc->udp_irq[i] = platform_get_irq(pdev, i);
+		if (udc->udp_irq[i] < 0)
+			return udc->udp_irq[i];
+	}
+
+	udc->udp_baseaddr = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(udc->udp_baseaddr)) {
+		dev_err(udc->dev, "IO map failure\n");
+		return PTR_ERR(udc->udp_baseaddr);
+	}
+
+	/* Get USB device clock */
+	udc->usb_slv_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(udc->usb_slv_clk)) {
+		dev_err(udc->dev, "failed to acquire USB device clock\n");
+		return PTR_ERR(udc->usb_slv_clk);
+	}
+
+	/* Enable USB device clock */
+	retval = clk_prepare_enable(udc->usb_slv_clk);
+	if (retval < 0) {
+		dev_err(udc->dev, "failed to start USB device clock\n");
+		return retval;
+	}
+
+	/* Setup deferred workqueue data */
+	udc->poweron = udc->pullup = 0;
+	INIT_WORK(&udc->pullup_job, pullup_work);
+#ifdef CONFIG_PM
+	INIT_WORK(&udc->power_job, power_work);
+#endif
+
+	/* All clocks are now on */
+	udc->clocked = 1;
+
+	isp1301_udc_configure(udc);
+	/* Allocate memory for the UDCA */
+	udc->udca_v_base = dma_alloc_coherent(&pdev->dev, UDCA_BUFF_SIZE,
+					      &dma_handle,
+					      (GFP_KERNEL | GFP_DMA));
+	if (!udc->udca_v_base) {
+		dev_err(udc->dev, "error getting UDCA region\n");
+		retval = -ENOMEM;
+		goto i2c_fail;
+	}
+	udc->udca_p_base = dma_handle;
+	dev_dbg(udc->dev, "DMA buffer(0x%x bytes), P:0x%08x, V:0x%p\n",
+		UDCA_BUFF_SIZE, udc->udca_p_base, udc->udca_v_base);
+
+	/* Setup the DD DMA memory pool */
+	udc->dd_cache = dma_pool_create("udc_dd", udc->dev,
+					sizeof(struct lpc32xx_usbd_dd_gad),
+					sizeof(u32), 0);
+	if (!udc->dd_cache) {
+		dev_err(udc->dev, "error getting DD DMA region\n");
+		retval = -ENOMEM;
+		goto dma_alloc_fail;
+	}
+
+	/* Clear USB peripheral and initialize gadget endpoints */
+	udc_disable(udc);
+	udc_reinit(udc);
+
+	/* Request IRQs - low and high priority USB device IRQs are routed to
+	 * the same handler, while the DMA interrupt is routed elsewhere */
+	retval = devm_request_irq(dev, udc->udp_irq[IRQ_USB_LP],
+				  lpc32xx_usb_lp_irq, 0, "udc_lp", udc);
+	if (retval < 0) {
+		dev_err(udc->dev, "LP request irq %d failed\n",
+			udc->udp_irq[IRQ_USB_LP]);
+		goto irq_req_fail;
+	}
+	retval = devm_request_irq(dev, udc->udp_irq[IRQ_USB_HP],
+				  lpc32xx_usb_hp_irq, 0, "udc_hp", udc);
+	if (retval < 0) {
+		dev_err(udc->dev, "HP request irq %d failed\n",
+			udc->udp_irq[IRQ_USB_HP]);
+		goto irq_req_fail;
+	}
+
+	retval = devm_request_irq(dev, udc->udp_irq[IRQ_USB_DEVDMA],
+				  lpc32xx_usb_devdma_irq, 0, "udc_dma", udc);
+	if (retval < 0) {
+		dev_err(udc->dev, "DEV request irq %d failed\n",
+			udc->udp_irq[IRQ_USB_DEVDMA]);
+		goto irq_req_fail;
+	}
+
+	/* The transceiver interrupt is used for VBUS detection and will
+	   kick off the VBUS handler function */
+	retval = devm_request_threaded_irq(dev, udc->udp_irq[IRQ_USB_ATX], NULL,
+					   lpc32xx_usb_vbus_irq, IRQF_ONESHOT,
+					   "udc_otg", udc);
+	if (retval < 0) {
+		dev_err(udc->dev, "VBUS request irq %d failed\n",
+			udc->udp_irq[IRQ_USB_ATX]);
+		goto irq_req_fail;
+	}
+
+	/* Initialize wait queue */
+	init_waitqueue_head(&udc->ep_disable_wait_queue);
+	atomic_set(&udc->enabled_ep_cnt, 0);
+
+	retval = usb_add_gadget_udc(dev, &udc->gadget);
+	if (retval < 0)
+		goto add_gadget_fail;
+
+	dev_set_drvdata(dev, udc);
+	device_init_wakeup(dev, 1);
+	create_debug_file(udc);
+
+	/* Disable clocks for now */
+	udc_clk_set(udc, 0);
+
+	dev_info(udc->dev, "%s version %s\n", driver_name, DRIVER_VERSION);
+	return 0;
+
+add_gadget_fail:
+irq_req_fail:
+	dma_pool_destroy(udc->dd_cache);
+dma_alloc_fail:
+	dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE,
+			  udc->udca_v_base, udc->udca_p_base);
+i2c_fail:
+	clk_disable_unprepare(udc->usb_slv_clk);
+	dev_err(udc->dev, "%s probe failed, %d\n", driver_name, retval);
+
+	return retval;
+}
+
+static int lpc32xx_udc_remove(struct platform_device *pdev)
+{
+	struct lpc32xx_udc *udc = platform_get_drvdata(pdev);
+
+	usb_del_gadget_udc(&udc->gadget);
+	if (udc->driver)
+		return -EBUSY;
+
+	udc_clk_set(udc, 1);
+	udc_disable(udc);
+	pullup(udc, 0);
+
+	device_init_wakeup(&pdev->dev, 0);
+	remove_debug_file(udc);
+
+	dma_pool_destroy(udc->dd_cache);
+	dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE,
+			  udc->udca_v_base, udc->udca_p_base);
+
+	clk_disable_unprepare(udc->usb_slv_clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+	struct lpc32xx_udc *udc = platform_get_drvdata(pdev);
+
+	if (udc->clocked) {
+		/* Power down ISP */
+		udc->poweron = 0;
+		isp1301_set_powerstate(udc, 0);
+
+		/* Disable clocking */
+		udc_clk_set(udc, 0);
+
+		/* Keep clock flag on, so we know to re-enable clocks
+		   on resume */
+		udc->clocked = 1;
+
+		/* Kill global USB clock */
+		clk_disable_unprepare(udc->usb_slv_clk);
+	}
+
+	return 0;
+}
+
+static int lpc32xx_udc_resume(struct platform_device *pdev)
+{
+	struct lpc32xx_udc *udc = platform_get_drvdata(pdev);
+
+	if (udc->clocked) {
+		/* Enable global USB clock */
+		clk_prepare_enable(udc->usb_slv_clk);
+
+		/* Enable clocking */
+		udc_clk_set(udc, 1);
+
+		/* ISP back to normal power mode */
+		udc->poweron = 1;
+		isp1301_set_powerstate(udc, 1);
+	}
+
+	return 0;
+}
+#else
+#define	lpc32xx_udc_suspend	NULL
+#define	lpc32xx_udc_resume	NULL
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id lpc32xx_udc_of_match[] = {
+	{ .compatible = "nxp,lpc3220-udc", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_udc_of_match);
+#endif
+
+static struct platform_driver lpc32xx_udc_driver = {
+	.remove		= lpc32xx_udc_remove,
+	.shutdown	= lpc32xx_udc_shutdown,
+	.suspend	= lpc32xx_udc_suspend,
+	.resume		= lpc32xx_udc_resume,
+	.driver		= {
+		.name	= driver_name,
+		.of_match_table = of_match_ptr(lpc32xx_udc_of_match),
+	},
+};
+
+module_platform_driver_probe(lpc32xx_udc_driver, lpc32xx_udc_probe);
+
+MODULE_DESCRIPTION("LPC32XX udc driver");
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lpc32xx_udc");
diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c
new file mode 100644
index 000000000..d88871e71
--- /dev/null
+++ b/drivers/usb/gadget/udc/m66592-udc.c
@@ -0,0 +1,1697 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * M66592 UDC (USB gadget)
+ *
+ * Copyright (C) 2006-2007 Renesas Solutions Corp.
+ *
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "m66592-udc.h"
+
+MODULE_DESCRIPTION("M66592 USB gadget driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yoshihiro Shimoda");
+MODULE_ALIAS("platform:m66592_udc");
+
+#define DRIVER_VERSION	"21 July 2009"
+
+static const char udc_name[] = "m66592_udc";
+static const char *m66592_ep_name[] = {
+	"ep0", "ep1", "ep2", "ep3", "ep4", "ep5", "ep6", "ep7"
+};
+
+static void disable_controller(struct m66592 *m66592);
+static void irq_ep0_write(struct m66592_ep *ep, struct m66592_request *req);
+static void irq_packet_write(struct m66592_ep *ep, struct m66592_request *req);
+static int m66592_queue(struct usb_ep *_ep, struct usb_request *_req,
+			gfp_t gfp_flags);
+
+static void transfer_complete(struct m66592_ep *ep,
+		struct m66592_request *req, int status);
+
+/*-------------------------------------------------------------------------*/
+static inline u16 get_usb_speed(struct m66592 *m66592)
+{
+	return (m66592_read(m66592, M66592_DVSTCTR) & M66592_RHST);
+}
+
+static void enable_pipe_irq(struct m66592 *m66592, u16 pipenum,
+		unsigned long reg)
+{
+	u16 tmp;
+
+	tmp = m66592_read(m66592, M66592_INTENB0);
+	m66592_bclr(m66592, M66592_BEMPE | M66592_NRDYE | M66592_BRDYE,
+			M66592_INTENB0);
+	m66592_bset(m66592, (1 << pipenum), reg);
+	m66592_write(m66592, tmp, M66592_INTENB0);
+}
+
+static void disable_pipe_irq(struct m66592 *m66592, u16 pipenum,
+		unsigned long reg)
+{
+	u16 tmp;
+
+	tmp = m66592_read(m66592, M66592_INTENB0);
+	m66592_bclr(m66592, M66592_BEMPE | M66592_NRDYE | M66592_BRDYE,
+			M66592_INTENB0);
+	m66592_bclr(m66592, (1 << pipenum), reg);
+	m66592_write(m66592, tmp, M66592_INTENB0);
+}
+
+static void m66592_usb_connect(struct m66592 *m66592)
+{
+	m66592_bset(m66592, M66592_CTRE, M66592_INTENB0);
+	m66592_bset(m66592, M66592_WDST | M66592_RDST | M66592_CMPL,
+			M66592_INTENB0);
+	m66592_bset(m66592, M66592_BEMPE | M66592_BRDYE, M66592_INTENB0);
+
+	m66592_bset(m66592, M66592_DPRPU, M66592_SYSCFG);
+}
+
+static void m66592_usb_disconnect(struct m66592 *m66592)
+__releases(m66592->lock)
+__acquires(m66592->lock)
+{
+	m66592_bclr(m66592, M66592_CTRE, M66592_INTENB0);
+	m66592_bclr(m66592, M66592_WDST | M66592_RDST | M66592_CMPL,
+			M66592_INTENB0);
+	m66592_bclr(m66592, M66592_BEMPE | M66592_BRDYE, M66592_INTENB0);
+	m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
+
+	m66592->gadget.speed = USB_SPEED_UNKNOWN;
+	spin_unlock(&m66592->lock);
+	m66592->driver->disconnect(&m66592->gadget);
+	spin_lock(&m66592->lock);
+
+	disable_controller(m66592);
+	INIT_LIST_HEAD(&m66592->ep[0].queue);
+}
+
+static inline u16 control_reg_get_pid(struct m66592 *m66592, u16 pipenum)
+{
+	u16 pid = 0;
+	unsigned long offset;
+
+	if (pipenum == 0)
+		pid = m66592_read(m66592, M66592_DCPCTR) & M66592_PID;
+	else if (pipenum < M66592_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		pid = m66592_read(m66592, offset) & M66592_PID;
+	} else
+		pr_err("unexpect pipe num (%d)\n", pipenum);
+
+	return pid;
+}
+
+static inline void control_reg_set_pid(struct m66592 *m66592, u16 pipenum,
+		u16 pid)
+{
+	unsigned long offset;
+
+	if (pipenum == 0)
+		m66592_mdfy(m66592, pid, M66592_PID, M66592_DCPCTR);
+	else if (pipenum < M66592_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		m66592_mdfy(m66592, pid, M66592_PID, offset);
+	} else
+		pr_err("unexpect pipe num (%d)\n", pipenum);
+}
+
+static inline void pipe_start(struct m66592 *m66592, u16 pipenum)
+{
+	control_reg_set_pid(m66592, pipenum, M66592_PID_BUF);
+}
+
+static inline void pipe_stop(struct m66592 *m66592, u16 pipenum)
+{
+	control_reg_set_pid(m66592, pipenum, M66592_PID_NAK);
+}
+
+static inline void pipe_stall(struct m66592 *m66592, u16 pipenum)
+{
+	control_reg_set_pid(m66592, pipenum, M66592_PID_STALL);
+}
+
+static inline u16 control_reg_get(struct m66592 *m66592, u16 pipenum)
+{
+	u16 ret = 0;
+	unsigned long offset;
+
+	if (pipenum == 0)
+		ret = m66592_read(m66592, M66592_DCPCTR);
+	else if (pipenum < M66592_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		ret = m66592_read(m66592, offset);
+	} else
+		pr_err("unexpect pipe num (%d)\n", pipenum);
+
+	return ret;
+}
+
+static inline void control_reg_sqclr(struct m66592 *m66592, u16 pipenum)
+{
+	unsigned long offset;
+
+	pipe_stop(m66592, pipenum);
+
+	if (pipenum == 0)
+		m66592_bset(m66592, M66592_SQCLR, M66592_DCPCTR);
+	else if (pipenum < M66592_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		m66592_bset(m66592, M66592_SQCLR, offset);
+	} else
+		pr_err("unexpect pipe num(%d)\n", pipenum);
+}
+
+static inline int get_buffer_size(struct m66592 *m66592, u16 pipenum)
+{
+	u16 tmp;
+	int size;
+
+	if (pipenum == 0) {
+		tmp = m66592_read(m66592, M66592_DCPCFG);
+		if ((tmp & M66592_CNTMD) != 0)
+			size = 256;
+		else {
+			tmp = m66592_read(m66592, M66592_DCPMAXP);
+			size = tmp & M66592_MAXP;
+		}
+	} else {
+		m66592_write(m66592, pipenum, M66592_PIPESEL);
+		tmp = m66592_read(m66592, M66592_PIPECFG);
+		if ((tmp & M66592_CNTMD) != 0) {
+			tmp = m66592_read(m66592, M66592_PIPEBUF);
+			size = ((tmp >> 10) + 1) * 64;
+		} else {
+			tmp = m66592_read(m66592, M66592_PIPEMAXP);
+			size = tmp & M66592_MXPS;
+		}
+	}
+
+	return size;
+}
+
+static inline void pipe_change(struct m66592 *m66592, u16 pipenum)
+{
+	struct m66592_ep *ep = m66592->pipenum2ep[pipenum];
+	unsigned short mbw;
+
+	if (ep->use_dma)
+		return;
+
+	m66592_mdfy(m66592, pipenum, M66592_CURPIPE, ep->fifosel);
+
+	ndelay(450);
+
+	if (m66592->pdata->on_chip)
+		mbw = M66592_MBW_32;
+	else
+		mbw = M66592_MBW_16;
+
+	m66592_bset(m66592, mbw, ep->fifosel);
+}
+
+static int pipe_buffer_setting(struct m66592 *m66592,
+		struct m66592_pipe_info *info)
+{
+	u16 bufnum = 0, buf_bsize = 0;
+	u16 pipecfg = 0;
+
+	if (info->pipe == 0)
+		return -EINVAL;
+
+	m66592_write(m66592, info->pipe, M66592_PIPESEL);
+
+	if (info->dir_in)
+		pipecfg |= M66592_DIR;
+	pipecfg |= info->type;
+	pipecfg |= info->epnum;
+	switch (info->type) {
+	case M66592_INT:
+		bufnum = 4 + (info->pipe - M66592_BASE_PIPENUM_INT);
+		buf_bsize = 0;
+		break;
+	case M66592_BULK:
+		/* isochronous pipes may be used as bulk pipes */
+		if (info->pipe >= M66592_BASE_PIPENUM_BULK)
+			bufnum = info->pipe - M66592_BASE_PIPENUM_BULK;
+		else
+			bufnum = info->pipe - M66592_BASE_PIPENUM_ISOC;
+
+		bufnum = M66592_BASE_BUFNUM + (bufnum * 16);
+		buf_bsize = 7;
+		pipecfg |= M66592_DBLB;
+		if (!info->dir_in)
+			pipecfg |= M66592_SHTNAK;
+		break;
+	case M66592_ISO:
+		bufnum = M66592_BASE_BUFNUM +
+			 (info->pipe - M66592_BASE_PIPENUM_ISOC) * 16;
+		buf_bsize = 7;
+		break;
+	}
+
+	if (buf_bsize && ((bufnum + 16) >= M66592_MAX_BUFNUM)) {
+		pr_err("m66592 pipe memory is insufficient\n");
+		return -ENOMEM;
+	}
+
+	m66592_write(m66592, pipecfg, M66592_PIPECFG);
+	m66592_write(m66592, (buf_bsize << 10) | (bufnum), M66592_PIPEBUF);
+	m66592_write(m66592, info->maxpacket, M66592_PIPEMAXP);
+	if (info->interval)
+		info->interval--;
+	m66592_write(m66592, info->interval, M66592_PIPEPERI);
+
+	return 0;
+}
+
+static void pipe_buffer_release(struct m66592 *m66592,
+				struct m66592_pipe_info *info)
+{
+	if (info->pipe == 0)
+		return;
+
+	if (is_bulk_pipe(info->pipe)) {
+		m66592->bulk--;
+	} else if (is_interrupt_pipe(info->pipe))
+		m66592->interrupt--;
+	else if (is_isoc_pipe(info->pipe)) {
+		m66592->isochronous--;
+		if (info->type == M66592_BULK)
+			m66592->bulk--;
+	} else
+		pr_err("ep_release: unexpect pipenum (%d)\n",
+				info->pipe);
+}
+
+static void pipe_initialize(struct m66592_ep *ep)
+{
+	struct m66592 *m66592 = ep->m66592;
+	unsigned short mbw;
+
+	m66592_mdfy(m66592, 0, M66592_CURPIPE, ep->fifosel);
+
+	m66592_write(m66592, M66592_ACLRM, ep->pipectr);
+	m66592_write(m66592, 0, ep->pipectr);
+	m66592_write(m66592, M66592_SQCLR, ep->pipectr);
+	if (ep->use_dma) {
+		m66592_mdfy(m66592, ep->pipenum, M66592_CURPIPE, ep->fifosel);
+
+		ndelay(450);
+
+		if (m66592->pdata->on_chip)
+			mbw = M66592_MBW_32;
+		else
+			mbw = M66592_MBW_16;
+
+		m66592_bset(m66592, mbw, ep->fifosel);
+	}
+}
+
+static void m66592_ep_setting(struct m66592 *m66592, struct m66592_ep *ep,
+		const struct usb_endpoint_descriptor *desc,
+		u16 pipenum, int dma)
+{
+	if ((pipenum != 0) && dma) {
+		if (m66592->num_dma == 0) {
+			m66592->num_dma++;
+			ep->use_dma = 1;
+			ep->fifoaddr = M66592_D0FIFO;
+			ep->fifosel = M66592_D0FIFOSEL;
+			ep->fifoctr = M66592_D0FIFOCTR;
+			ep->fifotrn = M66592_D0FIFOTRN;
+		} else if (!m66592->pdata->on_chip && m66592->num_dma == 1) {
+			m66592->num_dma++;
+			ep->use_dma = 1;
+			ep->fifoaddr = M66592_D1FIFO;
+			ep->fifosel = M66592_D1FIFOSEL;
+			ep->fifoctr = M66592_D1FIFOCTR;
+			ep->fifotrn = M66592_D1FIFOTRN;
+		} else {
+			ep->use_dma = 0;
+			ep->fifoaddr = M66592_CFIFO;
+			ep->fifosel = M66592_CFIFOSEL;
+			ep->fifoctr = M66592_CFIFOCTR;
+			ep->fifotrn = 0;
+		}
+	} else {
+		ep->use_dma = 0;
+		ep->fifoaddr = M66592_CFIFO;
+		ep->fifosel = M66592_CFIFOSEL;
+		ep->fifoctr = M66592_CFIFOCTR;
+		ep->fifotrn = 0;
+	}
+
+	ep->pipectr = get_pipectr_addr(pipenum);
+	ep->pipenum = pipenum;
+	ep->ep.maxpacket = usb_endpoint_maxp(desc);
+	m66592->pipenum2ep[pipenum] = ep;
+	m66592->epaddr2ep[desc->bEndpointAddress&USB_ENDPOINT_NUMBER_MASK] = ep;
+	INIT_LIST_HEAD(&ep->queue);
+}
+
+static void m66592_ep_release(struct m66592_ep *ep)
+{
+	struct m66592 *m66592 = ep->m66592;
+	u16 pipenum = ep->pipenum;
+
+	if (pipenum == 0)
+		return;
+
+	if (ep->use_dma)
+		m66592->num_dma--;
+	ep->pipenum = 0;
+	ep->busy = 0;
+	ep->use_dma = 0;
+}
+
+static int alloc_pipe_config(struct m66592_ep *ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct m66592 *m66592 = ep->m66592;
+	struct m66592_pipe_info info;
+	int dma = 0;
+	int *counter;
+	int ret;
+
+	ep->ep.desc = desc;
+
+	BUG_ON(ep->pipenum);
+
+	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_BULK:
+		if (m66592->bulk >= M66592_MAX_NUM_BULK) {
+			if (m66592->isochronous >= M66592_MAX_NUM_ISOC) {
+				pr_err("bulk pipe is insufficient\n");
+				return -ENODEV;
+			} else {
+				info.pipe = M66592_BASE_PIPENUM_ISOC
+						+ m66592->isochronous;
+				counter = &m66592->isochronous;
+			}
+		} else {
+			info.pipe = M66592_BASE_PIPENUM_BULK + m66592->bulk;
+			counter = &m66592->bulk;
+		}
+		info.type = M66592_BULK;
+		dma = 1;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		if (m66592->interrupt >= M66592_MAX_NUM_INT) {
+			pr_err("interrupt pipe is insufficient\n");
+			return -ENODEV;
+		}
+		info.pipe = M66592_BASE_PIPENUM_INT + m66592->interrupt;
+		info.type = M66592_INT;
+		counter = &m66592->interrupt;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (m66592->isochronous >= M66592_MAX_NUM_ISOC) {
+			pr_err("isochronous pipe is insufficient\n");
+			return -ENODEV;
+		}
+		info.pipe = M66592_BASE_PIPENUM_ISOC + m66592->isochronous;
+		info.type = M66592_ISO;
+		counter = &m66592->isochronous;
+		break;
+	default:
+		pr_err("unexpect xfer type\n");
+		return -EINVAL;
+	}
+	ep->type = info.type;
+
+	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+	info.maxpacket = usb_endpoint_maxp(desc);
+	info.interval = desc->bInterval;
+	if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+		info.dir_in = 1;
+	else
+		info.dir_in = 0;
+
+	ret = pipe_buffer_setting(m66592, &info);
+	if (ret < 0) {
+		pr_err("pipe_buffer_setting fail\n");
+		return ret;
+	}
+
+	(*counter)++;
+	if ((counter == &m66592->isochronous) && info.type == M66592_BULK)
+		m66592->bulk++;
+
+	m66592_ep_setting(m66592, ep, desc, info.pipe, dma);
+	pipe_initialize(ep);
+
+	return 0;
+}
+
+static int free_pipe_config(struct m66592_ep *ep)
+{
+	struct m66592 *m66592 = ep->m66592;
+	struct m66592_pipe_info info;
+
+	info.pipe = ep->pipenum;
+	info.type = ep->type;
+	pipe_buffer_release(m66592, &info);
+	m66592_ep_release(ep);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static void pipe_irq_enable(struct m66592 *m66592, u16 pipenum)
+{
+	enable_irq_ready(m66592, pipenum);
+	enable_irq_nrdy(m66592, pipenum);
+}
+
+static void pipe_irq_disable(struct m66592 *m66592, u16 pipenum)
+{
+	disable_irq_ready(m66592, pipenum);
+	disable_irq_nrdy(m66592, pipenum);
+}
+
+/* if complete is true, gadget driver complete function is not call */
+static void control_end(struct m66592 *m66592, unsigned ccpl)
+{
+	m66592->ep[0].internal_ccpl = ccpl;
+	pipe_start(m66592, 0);
+	m66592_bset(m66592, M66592_CCPL, M66592_DCPCTR);
+}
+
+static void start_ep0_write(struct m66592_ep *ep, struct m66592_request *req)
+{
+	struct m66592 *m66592 = ep->m66592;
+
+	pipe_change(m66592, ep->pipenum);
+	m66592_mdfy(m66592, M66592_ISEL | M66592_PIPE0,
+			(M66592_ISEL | M66592_CURPIPE),
+			M66592_CFIFOSEL);
+	m66592_write(m66592, M66592_BCLR, ep->fifoctr);
+	if (req->req.length == 0) {
+		m66592_bset(m66592, M66592_BVAL, ep->fifoctr);
+		pipe_start(m66592, 0);
+		transfer_complete(ep, req, 0);
+	} else {
+		m66592_write(m66592, ~M66592_BEMP0, M66592_BEMPSTS);
+		irq_ep0_write(ep, req);
+	}
+}
+
+static void start_packet_write(struct m66592_ep *ep, struct m66592_request *req)
+{
+	struct m66592 *m66592 = ep->m66592;
+	u16 tmp;
+
+	pipe_change(m66592, ep->pipenum);
+	disable_irq_empty(m66592, ep->pipenum);
+	pipe_start(m66592, ep->pipenum);
+
+	tmp = m66592_read(m66592, ep->fifoctr);
+	if (unlikely((tmp & M66592_FRDY) == 0))
+		pipe_irq_enable(m66592, ep->pipenum);
+	else
+		irq_packet_write(ep, req);
+}
+
+static void start_packet_read(struct m66592_ep *ep, struct m66592_request *req)
+{
+	struct m66592 *m66592 = ep->m66592;
+	u16 pipenum = ep->pipenum;
+
+	if (ep->pipenum == 0) {
+		m66592_mdfy(m66592, M66592_PIPE0,
+				(M66592_ISEL | M66592_CURPIPE),
+				M66592_CFIFOSEL);
+		m66592_write(m66592, M66592_BCLR, ep->fifoctr);
+		pipe_start(m66592, pipenum);
+		pipe_irq_enable(m66592, pipenum);
+	} else {
+		if (ep->use_dma) {
+			m66592_bset(m66592, M66592_TRCLR, ep->fifosel);
+			pipe_change(m66592, pipenum);
+			m66592_bset(m66592, M66592_TRENB, ep->fifosel);
+			m66592_write(m66592,
+				(req->req.length + ep->ep.maxpacket - 1)
+					/ ep->ep.maxpacket,
+				ep->fifotrn);
+		}
+		pipe_start(m66592, pipenum);	/* trigger once */
+		pipe_irq_enable(m66592, pipenum);
+	}
+}
+
+static void start_packet(struct m66592_ep *ep, struct m66592_request *req)
+{
+	if (ep->ep.desc->bEndpointAddress & USB_DIR_IN)
+		start_packet_write(ep, req);
+	else
+		start_packet_read(ep, req);
+}
+
+static void start_ep0(struct m66592_ep *ep, struct m66592_request *req)
+{
+	u16 ctsq;
+
+	ctsq = m66592_read(ep->m66592, M66592_INTSTS0) & M66592_CTSQ;
+
+	switch (ctsq) {
+	case M66592_CS_RDDS:
+		start_ep0_write(ep, req);
+		break;
+	case M66592_CS_WRDS:
+		start_packet_read(ep, req);
+		break;
+
+	case M66592_CS_WRND:
+		control_end(ep->m66592, 0);
+		break;
+	default:
+		pr_err("start_ep0: unexpect ctsq(%x)\n", ctsq);
+		break;
+	}
+}
+
+static void init_controller(struct m66592 *m66592)
+{
+	unsigned int endian;
+
+	if (m66592->pdata->on_chip) {
+		if (m66592->pdata->endian)
+			endian = 0; /* big endian */
+		else
+			endian = M66592_LITTLE; /* little endian */
+
+		m66592_bset(m66592, M66592_HSE, M66592_SYSCFG);	/* High spd */
+		m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG);
+		m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
+		m66592_bset(m66592, M66592_USBE, M66592_SYSCFG);
+
+		/* This is a workaound for SH7722 2nd cut */
+		m66592_bset(m66592, 0x8000, M66592_DVSTCTR);
+		m66592_bset(m66592, 0x1000, M66592_TESTMODE);
+		m66592_bclr(m66592, 0x8000, M66592_DVSTCTR);
+
+		m66592_bset(m66592, M66592_INTL, M66592_INTENB1);
+
+		m66592_write(m66592, 0, M66592_CFBCFG);
+		m66592_write(m66592, 0, M66592_D0FBCFG);
+		m66592_bset(m66592, endian, M66592_CFBCFG);
+		m66592_bset(m66592, endian, M66592_D0FBCFG);
+	} else {
+		unsigned int clock, vif, irq_sense;
+
+		if (m66592->pdata->endian)
+			endian = M66592_BIGEND; /* big endian */
+		else
+			endian = 0; /* little endian */
+
+		if (m66592->pdata->vif)
+			vif = M66592_LDRV; /* 3.3v */
+		else
+			vif = 0; /* 1.5v */
+
+		switch (m66592->pdata->xtal) {
+		case M66592_PLATDATA_XTAL_12MHZ:
+			clock = M66592_XTAL12;
+			break;
+		case M66592_PLATDATA_XTAL_24MHZ:
+			clock = M66592_XTAL24;
+			break;
+		case M66592_PLATDATA_XTAL_48MHZ:
+			clock = M66592_XTAL48;
+			break;
+		default:
+			pr_warn("m66592-udc: xtal configuration error\n");
+			clock = 0;
+		}
+
+		switch (m66592->irq_trigger) {
+		case IRQF_TRIGGER_LOW:
+			irq_sense = M66592_INTL;
+			break;
+		case IRQF_TRIGGER_FALLING:
+			irq_sense = 0;
+			break;
+		default:
+			pr_warn("m66592-udc: irq trigger config error\n");
+			irq_sense = 0;
+		}
+
+		m66592_bset(m66592,
+			    (vif & M66592_LDRV) | (endian & M66592_BIGEND),
+			    M66592_PINCFG);
+		m66592_bset(m66592, M66592_HSE, M66592_SYSCFG);	/* High spd */
+		m66592_mdfy(m66592, clock & M66592_XTAL, M66592_XTAL,
+			    M66592_SYSCFG);
+		m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG);
+		m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
+		m66592_bset(m66592, M66592_USBE, M66592_SYSCFG);
+
+		m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG);
+
+		msleep(3);
+
+		m66592_bset(m66592, M66592_RCKE | M66592_PLLC, M66592_SYSCFG);
+
+		msleep(1);
+
+		m66592_bset(m66592, M66592_SCKE, M66592_SYSCFG);
+
+		m66592_bset(m66592, irq_sense & M66592_INTL, M66592_INTENB1);
+		m66592_write(m66592, M66592_BURST | M66592_CPU_ADR_RD_WR,
+			     M66592_DMA0CFG);
+	}
+}
+
+static void disable_controller(struct m66592 *m66592)
+{
+	m66592_bclr(m66592, M66592_UTST, M66592_TESTMODE);
+	if (!m66592->pdata->on_chip) {
+		m66592_bclr(m66592, M66592_SCKE, M66592_SYSCFG);
+		udelay(1);
+		m66592_bclr(m66592, M66592_PLLC, M66592_SYSCFG);
+		udelay(1);
+		m66592_bclr(m66592, M66592_RCKE, M66592_SYSCFG);
+		udelay(1);
+		m66592_bclr(m66592, M66592_XCKE, M66592_SYSCFG);
+	}
+}
+
+static void m66592_start_xclock(struct m66592 *m66592)
+{
+	u16 tmp;
+
+	if (!m66592->pdata->on_chip) {
+		tmp = m66592_read(m66592, M66592_SYSCFG);
+		if (!(tmp & M66592_XCKE))
+			m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+static void transfer_complete(struct m66592_ep *ep,
+		struct m66592_request *req, int status)
+__releases(m66592->lock)
+__acquires(m66592->lock)
+{
+	int restart = 0;
+
+	if (unlikely(ep->pipenum == 0)) {
+		if (ep->internal_ccpl) {
+			ep->internal_ccpl = 0;
+			return;
+		}
+	}
+
+	list_del_init(&req->queue);
+	if (ep->m66592->gadget.speed == USB_SPEED_UNKNOWN)
+		req->req.status = -ESHUTDOWN;
+	else
+		req->req.status = status;
+
+	if (!list_empty(&ep->queue))
+		restart = 1;
+
+	spin_unlock(&ep->m66592->lock);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&ep->m66592->lock);
+
+	if (restart) {
+		req = list_entry(ep->queue.next, struct m66592_request, queue);
+		if (ep->ep.desc)
+			start_packet(ep, req);
+	}
+}
+
+static void irq_ep0_write(struct m66592_ep *ep, struct m66592_request *req)
+{
+	int i;
+	u16 tmp;
+	unsigned bufsize;
+	size_t size;
+	void *buf;
+	u16 pipenum = ep->pipenum;
+	struct m66592 *m66592 = ep->m66592;
+
+	pipe_change(m66592, pipenum);
+	m66592_bset(m66592, M66592_ISEL, ep->fifosel);
+
+	i = 0;
+	do {
+		tmp = m66592_read(m66592, ep->fifoctr);
+		if (i++ > 100000) {
+			pr_err("pipe0 is busy. maybe cpu i/o bus "
+				"conflict. please power off this controller.");
+			return;
+		}
+		ndelay(1);
+	} while ((tmp & M66592_FRDY) == 0);
+
+	/* prepare parameters */
+	bufsize = get_buffer_size(m66592, pipenum);
+	buf = req->req.buf + req->req.actual;
+	size = min(bufsize, req->req.length - req->req.actual);
+
+	/* write fifo */
+	if (req->req.buf) {
+		if (size > 0)
+			m66592_write_fifo(m66592, ep, buf, size);
+		if ((size == 0) || ((size % ep->ep.maxpacket) != 0))
+			m66592_bset(m66592, M66592_BVAL, ep->fifoctr);
+	}
+
+	/* update parameters */
+	req->req.actual += size;
+
+	/* check transfer finish */
+	if ((!req->req.zero && (req->req.actual == req->req.length))
+			|| (size % ep->ep.maxpacket)
+			|| (size == 0)) {
+		disable_irq_ready(m66592, pipenum);
+		disable_irq_empty(m66592, pipenum);
+	} else {
+		disable_irq_ready(m66592, pipenum);
+		enable_irq_empty(m66592, pipenum);
+	}
+	pipe_start(m66592, pipenum);
+}
+
+static void irq_packet_write(struct m66592_ep *ep, struct m66592_request *req)
+{
+	u16 tmp;
+	unsigned bufsize;
+	size_t size;
+	void *buf;
+	u16 pipenum = ep->pipenum;
+	struct m66592 *m66592 = ep->m66592;
+
+	pipe_change(m66592, pipenum);
+	tmp = m66592_read(m66592, ep->fifoctr);
+	if (unlikely((tmp & M66592_FRDY) == 0)) {
+		pipe_stop(m66592, pipenum);
+		pipe_irq_disable(m66592, pipenum);
+		pr_err("write fifo not ready. pipnum=%d\n", pipenum);
+		return;
+	}
+
+	/* prepare parameters */
+	bufsize = get_buffer_size(m66592, pipenum);
+	buf = req->req.buf + req->req.actual;
+	size = min(bufsize, req->req.length - req->req.actual);
+
+	/* write fifo */
+	if (req->req.buf) {
+		m66592_write_fifo(m66592, ep, buf, size);
+		if ((size == 0)
+				|| ((size % ep->ep.maxpacket) != 0)
+				|| ((bufsize != ep->ep.maxpacket)
+					&& (bufsize > size)))
+			m66592_bset(m66592, M66592_BVAL, ep->fifoctr);
+	}
+
+	/* update parameters */
+	req->req.actual += size;
+	/* check transfer finish */
+	if ((!req->req.zero && (req->req.actual == req->req.length))
+			|| (size % ep->ep.maxpacket)
+			|| (size == 0)) {
+		disable_irq_ready(m66592, pipenum);
+		enable_irq_empty(m66592, pipenum);
+	} else {
+		disable_irq_empty(m66592, pipenum);
+		pipe_irq_enable(m66592, pipenum);
+	}
+}
+
+static void irq_packet_read(struct m66592_ep *ep, struct m66592_request *req)
+{
+	u16 tmp;
+	int rcv_len, bufsize, req_len;
+	int size;
+	void *buf;
+	u16 pipenum = ep->pipenum;
+	struct m66592 *m66592 = ep->m66592;
+	int finish = 0;
+
+	pipe_change(m66592, pipenum);
+	tmp = m66592_read(m66592, ep->fifoctr);
+	if (unlikely((tmp & M66592_FRDY) == 0)) {
+		req->req.status = -EPIPE;
+		pipe_stop(m66592, pipenum);
+		pipe_irq_disable(m66592, pipenum);
+		pr_err("read fifo not ready");
+		return;
+	}
+
+	/* prepare parameters */
+	rcv_len = tmp & M66592_DTLN;
+	bufsize = get_buffer_size(m66592, pipenum);
+
+	buf = req->req.buf + req->req.actual;
+	req_len = req->req.length - req->req.actual;
+	if (rcv_len < bufsize)
+		size = min(rcv_len, req_len);
+	else
+		size = min(bufsize, req_len);
+
+	/* update parameters */
+	req->req.actual += size;
+
+	/* check transfer finish */
+	if ((!req->req.zero && (req->req.actual == req->req.length))
+			|| (size % ep->ep.maxpacket)
+			|| (size == 0)) {
+		pipe_stop(m66592, pipenum);
+		pipe_irq_disable(m66592, pipenum);
+		finish = 1;
+	}
+
+	/* read fifo */
+	if (req->req.buf) {
+		if (size == 0)
+			m66592_write(m66592, M66592_BCLR, ep->fifoctr);
+		else
+			m66592_read_fifo(m66592, ep->fifoaddr, buf, size);
+	}
+
+	if ((ep->pipenum != 0) && finish)
+		transfer_complete(ep, req, 0);
+}
+
+static void irq_pipe_ready(struct m66592 *m66592, u16 status, u16 enb)
+{
+	u16 check;
+	u16 pipenum;
+	struct m66592_ep *ep;
+	struct m66592_request *req;
+
+	if ((status & M66592_BRDY0) && (enb & M66592_BRDY0)) {
+		m66592_write(m66592, ~M66592_BRDY0, M66592_BRDYSTS);
+		m66592_mdfy(m66592, M66592_PIPE0, M66592_CURPIPE,
+				M66592_CFIFOSEL);
+
+		ep = &m66592->ep[0];
+		req = list_entry(ep->queue.next, struct m66592_request, queue);
+		irq_packet_read(ep, req);
+	} else {
+		for (pipenum = 1; pipenum < M66592_MAX_NUM_PIPE; pipenum++) {
+			check = 1 << pipenum;
+			if ((status & check) && (enb & check)) {
+				m66592_write(m66592, ~check, M66592_BRDYSTS);
+				ep = m66592->pipenum2ep[pipenum];
+				req = list_entry(ep->queue.next,
+						 struct m66592_request, queue);
+				if (ep->ep.desc->bEndpointAddress & USB_DIR_IN)
+					irq_packet_write(ep, req);
+				else
+					irq_packet_read(ep, req);
+			}
+		}
+	}
+}
+
+static void irq_pipe_empty(struct m66592 *m66592, u16 status, u16 enb)
+{
+	u16 tmp;
+	u16 check;
+	u16 pipenum;
+	struct m66592_ep *ep;
+	struct m66592_request *req;
+
+	if ((status & M66592_BEMP0) && (enb & M66592_BEMP0)) {
+		m66592_write(m66592, ~M66592_BEMP0, M66592_BEMPSTS);
+
+		ep = &m66592->ep[0];
+		req = list_entry(ep->queue.next, struct m66592_request, queue);
+		irq_ep0_write(ep, req);
+	} else {
+		for (pipenum = 1; pipenum < M66592_MAX_NUM_PIPE; pipenum++) {
+			check = 1 << pipenum;
+			if ((status & check) && (enb & check)) {
+				m66592_write(m66592, ~check, M66592_BEMPSTS);
+				tmp = control_reg_get(m66592, pipenum);
+				if ((tmp & M66592_INBUFM) == 0) {
+					disable_irq_empty(m66592, pipenum);
+					pipe_irq_disable(m66592, pipenum);
+					pipe_stop(m66592, pipenum);
+					ep = m66592->pipenum2ep[pipenum];
+					req = list_entry(ep->queue.next,
+							 struct m66592_request,
+							 queue);
+					if (!list_empty(&ep->queue))
+						transfer_complete(ep, req, 0);
+				}
+			}
+		}
+	}
+}
+
+static void get_status(struct m66592 *m66592, struct usb_ctrlrequest *ctrl)
+__releases(m66592->lock)
+__acquires(m66592->lock)
+{
+	struct m66592_ep *ep;
+	u16 pid;
+	u16 status = 0;
+	u16 w_index = le16_to_cpu(ctrl->wIndex);
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		status = 1 << USB_DEVICE_SELF_POWERED;
+		break;
+	case USB_RECIP_INTERFACE:
+		status = 0;
+		break;
+	case USB_RECIP_ENDPOINT:
+		ep = m66592->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK];
+		pid = control_reg_get_pid(m66592, ep->pipenum);
+		if (pid == M66592_PID_STALL)
+			status = 1 << USB_ENDPOINT_HALT;
+		else
+			status = 0;
+		break;
+	default:
+		pipe_stall(m66592, 0);
+		return;		/* exit */
+	}
+
+	m66592->ep0_data = cpu_to_le16(status);
+	m66592->ep0_req->buf = &m66592->ep0_data;
+	m66592->ep0_req->length = 2;
+	/* AV: what happens if we get called again before that gets through? */
+	spin_unlock(&m66592->lock);
+	m66592_queue(m66592->gadget.ep0, m66592->ep0_req, GFP_KERNEL);
+	spin_lock(&m66592->lock);
+}
+
+static void clear_feature(struct m66592 *m66592, struct usb_ctrlrequest *ctrl)
+{
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		control_end(m66592, 1);
+		break;
+	case USB_RECIP_INTERFACE:
+		control_end(m66592, 1);
+		break;
+	case USB_RECIP_ENDPOINT: {
+		struct m66592_ep *ep;
+		struct m66592_request *req;
+		u16 w_index = le16_to_cpu(ctrl->wIndex);
+
+		ep = m66592->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK];
+		pipe_stop(m66592, ep->pipenum);
+		control_reg_sqclr(m66592, ep->pipenum);
+
+		control_end(m66592, 1);
+
+		req = list_entry(ep->queue.next,
+		struct m66592_request, queue);
+		if (ep->busy) {
+			ep->busy = 0;
+			if (list_empty(&ep->queue))
+				break;
+			start_packet(ep, req);
+		} else if (!list_empty(&ep->queue))
+			pipe_start(m66592, ep->pipenum);
+		}
+		break;
+	default:
+		pipe_stall(m66592, 0);
+		break;
+	}
+}
+
+static void set_feature(struct m66592 *m66592, struct usb_ctrlrequest *ctrl)
+{
+	u16 tmp;
+	int timeout = 3000;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		switch (le16_to_cpu(ctrl->wValue)) {
+		case USB_DEVICE_TEST_MODE:
+			control_end(m66592, 1);
+			/* Wait for the completion of status stage */
+			do {
+				tmp = m66592_read(m66592, M66592_INTSTS0) &
+								M66592_CTSQ;
+				udelay(1);
+			} while (tmp != M66592_CS_IDST && timeout-- > 0);
+
+			if (tmp == M66592_CS_IDST)
+				m66592_bset(m66592,
+					    le16_to_cpu(ctrl->wIndex >> 8),
+					    M66592_TESTMODE);
+			break;
+		default:
+			pipe_stall(m66592, 0);
+			break;
+		}
+		break;
+	case USB_RECIP_INTERFACE:
+		control_end(m66592, 1);
+		break;
+	case USB_RECIP_ENDPOINT: {
+		struct m66592_ep *ep;
+		u16 w_index = le16_to_cpu(ctrl->wIndex);
+
+		ep = m66592->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK];
+		pipe_stall(m66592, ep->pipenum);
+
+		control_end(m66592, 1);
+		}
+		break;
+	default:
+		pipe_stall(m66592, 0);
+		break;
+	}
+}
+
+/* if return value is true, call class driver's setup() */
+static int setup_packet(struct m66592 *m66592, struct usb_ctrlrequest *ctrl)
+{
+	u16 *p = (u16 *)ctrl;
+	unsigned long offset = M66592_USBREQ;
+	int i, ret = 0;
+
+	/* read fifo */
+	m66592_write(m66592, ~M66592_VALID, M66592_INTSTS0);
+
+	for (i = 0; i < 4; i++)
+		p[i] = m66592_read(m66592, offset + i*2);
+
+	/* check request */
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (ctrl->bRequest) {
+		case USB_REQ_GET_STATUS:
+			get_status(m66592, ctrl);
+			break;
+		case USB_REQ_CLEAR_FEATURE:
+			clear_feature(m66592, ctrl);
+			break;
+		case USB_REQ_SET_FEATURE:
+			set_feature(m66592, ctrl);
+			break;
+		default:
+			ret = 1;
+			break;
+		}
+	} else
+		ret = 1;
+	return ret;
+}
+
+static void m66592_update_usb_speed(struct m66592 *m66592)
+{
+	u16 speed = get_usb_speed(m66592);
+
+	switch (speed) {
+	case M66592_HSMODE:
+		m66592->gadget.speed = USB_SPEED_HIGH;
+		break;
+	case M66592_FSMODE:
+		m66592->gadget.speed = USB_SPEED_FULL;
+		break;
+	default:
+		m66592->gadget.speed = USB_SPEED_UNKNOWN;
+		pr_err("USB speed unknown\n");
+	}
+}
+
+static void irq_device_state(struct m66592 *m66592)
+{
+	u16 dvsq;
+
+	dvsq = m66592_read(m66592, M66592_INTSTS0) & M66592_DVSQ;
+	m66592_write(m66592, ~M66592_DVST, M66592_INTSTS0);
+
+	if (dvsq == M66592_DS_DFLT) {	/* bus reset */
+		usb_gadget_udc_reset(&m66592->gadget, m66592->driver);
+		m66592_update_usb_speed(m66592);
+	}
+	if (m66592->old_dvsq == M66592_DS_CNFG && dvsq != M66592_DS_CNFG)
+		m66592_update_usb_speed(m66592);
+	if ((dvsq == M66592_DS_CNFG || dvsq == M66592_DS_ADDS)
+			&& m66592->gadget.speed == USB_SPEED_UNKNOWN)
+		m66592_update_usb_speed(m66592);
+
+	m66592->old_dvsq = dvsq;
+}
+
+static void irq_control_stage(struct m66592 *m66592)
+__releases(m66592->lock)
+__acquires(m66592->lock)
+{
+	struct usb_ctrlrequest ctrl;
+	u16 ctsq;
+
+	ctsq = m66592_read(m66592, M66592_INTSTS0) & M66592_CTSQ;
+	m66592_write(m66592, ~M66592_CTRT, M66592_INTSTS0);
+
+	switch (ctsq) {
+	case M66592_CS_IDST: {
+		struct m66592_ep *ep;
+		struct m66592_request *req;
+		ep = &m66592->ep[0];
+		req = list_entry(ep->queue.next, struct m66592_request, queue);
+		transfer_complete(ep, req, 0);
+		}
+		break;
+
+	case M66592_CS_RDDS:
+	case M66592_CS_WRDS:
+	case M66592_CS_WRND:
+		if (setup_packet(m66592, &ctrl)) {
+			spin_unlock(&m66592->lock);
+			if (m66592->driver->setup(&m66592->gadget, &ctrl) < 0)
+				pipe_stall(m66592, 0);
+			spin_lock(&m66592->lock);
+		}
+		break;
+	case M66592_CS_RDSS:
+	case M66592_CS_WRSS:
+		control_end(m66592, 0);
+		break;
+	default:
+		pr_err("ctrl_stage: unexpect ctsq(%x)\n", ctsq);
+		break;
+	}
+}
+
+static irqreturn_t m66592_irq(int irq, void *_m66592)
+{
+	struct m66592 *m66592 = _m66592;
+	u16 intsts0;
+	u16 intenb0;
+	u16 savepipe;
+	u16 mask0;
+
+	spin_lock(&m66592->lock);
+
+	intsts0 = m66592_read(m66592, M66592_INTSTS0);
+	intenb0 = m66592_read(m66592, M66592_INTENB0);
+
+	if (m66592->pdata->on_chip && !intsts0 && !intenb0) {
+		/*
+		 * When USB clock stops, it cannot read register. Even if a
+		 * clock stops, the interrupt occurs. So this driver turn on
+		 * a clock by this timing and do re-reading of register.
+		 */
+		m66592_start_xclock(m66592);
+		intsts0 = m66592_read(m66592, M66592_INTSTS0);
+		intenb0 = m66592_read(m66592, M66592_INTENB0);
+	}
+
+	savepipe = m66592_read(m66592, M66592_CFIFOSEL);
+
+	mask0 = intsts0 & intenb0;
+	if (mask0) {
+		u16 brdysts = m66592_read(m66592, M66592_BRDYSTS);
+		u16 bempsts = m66592_read(m66592, M66592_BEMPSTS);
+		u16 brdyenb = m66592_read(m66592, M66592_BRDYENB);
+		u16 bempenb = m66592_read(m66592, M66592_BEMPENB);
+
+		if (mask0 & M66592_VBINT) {
+			m66592_write(m66592,  0xffff & ~M66592_VBINT,
+					M66592_INTSTS0);
+			m66592_start_xclock(m66592);
+
+			/* start vbus sampling */
+			m66592->old_vbus = m66592_read(m66592, M66592_INTSTS0)
+					& M66592_VBSTS;
+			m66592->scount = M66592_MAX_SAMPLING;
+
+			mod_timer(&m66592->timer,
+					jiffies + msecs_to_jiffies(50));
+		}
+		if (intsts0 & M66592_DVSQ)
+			irq_device_state(m66592);
+
+		if ((intsts0 & M66592_BRDY) && (intenb0 & M66592_BRDYE)
+				&& (brdysts & brdyenb)) {
+			irq_pipe_ready(m66592, brdysts, brdyenb);
+		}
+		if ((intsts0 & M66592_BEMP) && (intenb0 & M66592_BEMPE)
+				&& (bempsts & bempenb)) {
+			irq_pipe_empty(m66592, bempsts, bempenb);
+		}
+
+		if (intsts0 & M66592_CTRT)
+			irq_control_stage(m66592);
+	}
+
+	m66592_write(m66592, savepipe, M66592_CFIFOSEL);
+
+	spin_unlock(&m66592->lock);
+	return IRQ_HANDLED;
+}
+
+static void m66592_timer(struct timer_list *t)
+{
+	struct m66592 *m66592 = from_timer(m66592, t, timer);
+	unsigned long flags;
+	u16 tmp;
+
+	spin_lock_irqsave(&m66592->lock, flags);
+	tmp = m66592_read(m66592, M66592_SYSCFG);
+	if (!(tmp & M66592_RCKE)) {
+		m66592_bset(m66592, M66592_RCKE | M66592_PLLC, M66592_SYSCFG);
+		udelay(10);
+		m66592_bset(m66592, M66592_SCKE, M66592_SYSCFG);
+	}
+	if (m66592->scount > 0) {
+		tmp = m66592_read(m66592, M66592_INTSTS0) & M66592_VBSTS;
+		if (tmp == m66592->old_vbus) {
+			m66592->scount--;
+			if (m66592->scount == 0) {
+				if (tmp == M66592_VBSTS)
+					m66592_usb_connect(m66592);
+				else
+					m66592_usb_disconnect(m66592);
+			} else {
+				mod_timer(&m66592->timer,
+					jiffies + msecs_to_jiffies(50));
+			}
+		} else {
+			m66592->scount = M66592_MAX_SAMPLING;
+			m66592->old_vbus = tmp;
+			mod_timer(&m66592->timer,
+					jiffies + msecs_to_jiffies(50));
+		}
+	}
+	spin_unlock_irqrestore(&m66592->lock, flags);
+}
+
+/*-------------------------------------------------------------------------*/
+static int m66592_enable(struct usb_ep *_ep,
+			 const struct usb_endpoint_descriptor *desc)
+{
+	struct m66592_ep *ep;
+
+	ep = container_of(_ep, struct m66592_ep, ep);
+	return alloc_pipe_config(ep, desc);
+}
+
+static int m66592_disable(struct usb_ep *_ep)
+{
+	struct m66592_ep *ep;
+	struct m66592_request *req;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct m66592_ep, ep);
+	BUG_ON(!ep);
+
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct m66592_request, queue);
+		spin_lock_irqsave(&ep->m66592->lock, flags);
+		transfer_complete(ep, req, -ECONNRESET);
+		spin_unlock_irqrestore(&ep->m66592->lock, flags);
+	}
+
+	pipe_irq_disable(ep->m66592, ep->pipenum);
+	return free_pipe_config(ep);
+}
+
+static struct usb_request *m66592_alloc_request(struct usb_ep *_ep,
+						gfp_t gfp_flags)
+{
+	struct m66592_request *req;
+
+	req = kzalloc(sizeof(struct m66592_request), gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void m66592_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct m66592_request *req;
+
+	req = container_of(_req, struct m66592_request, req);
+	kfree(req);
+}
+
+static int m66592_queue(struct usb_ep *_ep, struct usb_request *_req,
+			gfp_t gfp_flags)
+{
+	struct m66592_ep *ep;
+	struct m66592_request *req;
+	unsigned long flags;
+	int request = 0;
+
+	ep = container_of(_ep, struct m66592_ep, ep);
+	req = container_of(_req, struct m66592_request, req);
+
+	if (ep->m66592->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&ep->m66592->lock, flags);
+
+	if (list_empty(&ep->queue))
+		request = 1;
+
+	list_add_tail(&req->queue, &ep->queue);
+	req->req.actual = 0;
+	req->req.status = -EINPROGRESS;
+
+	if (ep->ep.desc == NULL)	/* control */
+		start_ep0(ep, req);
+	else {
+		if (request && !ep->busy)
+			start_packet(ep, req);
+	}
+
+	spin_unlock_irqrestore(&ep->m66592->lock, flags);
+
+	return 0;
+}
+
+static int m66592_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct m66592_ep *ep;
+	struct m66592_request *req;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct m66592_ep, ep);
+	req = container_of(_req, struct m66592_request, req);
+
+	spin_lock_irqsave(&ep->m66592->lock, flags);
+	if (!list_empty(&ep->queue))
+		transfer_complete(ep, req, -ECONNRESET);
+	spin_unlock_irqrestore(&ep->m66592->lock, flags);
+
+	return 0;
+}
+
+static int m66592_set_halt(struct usb_ep *_ep, int value)
+{
+	struct m66592_ep *ep = container_of(_ep, struct m66592_ep, ep);
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&ep->m66592->lock, flags);
+	if (!list_empty(&ep->queue)) {
+		ret = -EAGAIN;
+	} else if (value) {
+		ep->busy = 1;
+		pipe_stall(ep->m66592, ep->pipenum);
+	} else {
+		ep->busy = 0;
+		pipe_stop(ep->m66592, ep->pipenum);
+	}
+	spin_unlock_irqrestore(&ep->m66592->lock, flags);
+	return ret;
+}
+
+static void m66592_fifo_flush(struct usb_ep *_ep)
+{
+	struct m66592_ep *ep;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct m66592_ep, ep);
+	spin_lock_irqsave(&ep->m66592->lock, flags);
+	if (list_empty(&ep->queue) && !ep->busy) {
+		pipe_stop(ep->m66592, ep->pipenum);
+		m66592_bclr(ep->m66592, M66592_BCLR, ep->fifoctr);
+	}
+	spin_unlock_irqrestore(&ep->m66592->lock, flags);
+}
+
+static const struct usb_ep_ops m66592_ep_ops = {
+	.enable		= m66592_enable,
+	.disable	= m66592_disable,
+
+	.alloc_request	= m66592_alloc_request,
+	.free_request	= m66592_free_request,
+
+	.queue		= m66592_queue,
+	.dequeue	= m66592_dequeue,
+
+	.set_halt	= m66592_set_halt,
+	.fifo_flush	= m66592_fifo_flush,
+};
+
+/*-------------------------------------------------------------------------*/
+static int m66592_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct m66592 *m66592 = to_m66592(g);
+
+	/* hook up the driver */
+	m66592->driver = driver;
+
+	m66592_bset(m66592, M66592_VBSE | M66592_URST, M66592_INTENB0);
+	if (m66592_read(m66592, M66592_INTSTS0) & M66592_VBSTS) {
+		m66592_start_xclock(m66592);
+		/* start vbus sampling */
+		m66592->old_vbus = m66592_read(m66592,
+					 M66592_INTSTS0) & M66592_VBSTS;
+		m66592->scount = M66592_MAX_SAMPLING;
+		mod_timer(&m66592->timer, jiffies + msecs_to_jiffies(50));
+	}
+
+	return 0;
+}
+
+static int m66592_udc_stop(struct usb_gadget *g)
+{
+	struct m66592 *m66592 = to_m66592(g);
+
+	m66592_bclr(m66592, M66592_VBSE | M66592_URST, M66592_INTENB0);
+
+	init_controller(m66592);
+	disable_controller(m66592);
+
+	m66592->driver = NULL;
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int m66592_get_frame(struct usb_gadget *_gadget)
+{
+	struct m66592 *m66592 = gadget_to_m66592(_gadget);
+	return m66592_read(m66592, M66592_FRMNUM) & 0x03FF;
+}
+
+static int m66592_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct m66592 *m66592 = gadget_to_m66592(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&m66592->lock, flags);
+	if (is_on)
+		m66592_bset(m66592, M66592_DPRPU, M66592_SYSCFG);
+	else
+		m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
+	spin_unlock_irqrestore(&m66592->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops m66592_gadget_ops = {
+	.get_frame		= m66592_get_frame,
+	.udc_start		= m66592_udc_start,
+	.udc_stop		= m66592_udc_stop,
+	.pullup			= m66592_pullup,
+};
+
+static int m66592_remove(struct platform_device *pdev)
+{
+	struct m66592		*m66592 = platform_get_drvdata(pdev);
+
+	usb_del_gadget_udc(&m66592->gadget);
+
+	del_timer_sync(&m66592->timer);
+	iounmap(m66592->reg);
+	free_irq(platform_get_irq(pdev, 0), m66592);
+	m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req);
+	if (m66592->pdata->on_chip) {
+		clk_disable(m66592->clk);
+		clk_put(m66592->clk);
+	}
+	kfree(m66592);
+	return 0;
+}
+
+static void nop_completion(struct usb_ep *ep, struct usb_request *r)
+{
+}
+
+static int m66592_probe(struct platform_device *pdev)
+{
+	struct resource *res, *ires;
+	void __iomem *reg = NULL;
+	struct m66592 *m66592 = NULL;
+	char clk_name[8];
+	int ret = 0;
+	int i;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENODEV;
+		pr_err("platform_get_resource error.\n");
+		goto clean_up;
+	}
+
+	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!ires) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev,
+			"platform_get_resource IORESOURCE_IRQ error.\n");
+		goto clean_up;
+	}
+
+	reg = ioremap(res->start, resource_size(res));
+	if (reg == NULL) {
+		ret = -ENOMEM;
+		pr_err("ioremap error.\n");
+		goto clean_up;
+	}
+
+	if (dev_get_platdata(&pdev->dev) == NULL) {
+		dev_err(&pdev->dev, "no platform data\n");
+		ret = -ENODEV;
+		goto clean_up;
+	}
+
+	/* initialize ucd */
+	m66592 = kzalloc(sizeof(struct m66592), GFP_KERNEL);
+	if (m66592 == NULL) {
+		ret = -ENOMEM;
+		goto clean_up;
+	}
+
+	m66592->pdata = dev_get_platdata(&pdev->dev);
+	m66592->irq_trigger = ires->flags & IRQF_TRIGGER_MASK;
+
+	spin_lock_init(&m66592->lock);
+	platform_set_drvdata(pdev, m66592);
+
+	m66592->gadget.ops = &m66592_gadget_ops;
+	m66592->gadget.max_speed = USB_SPEED_HIGH;
+	m66592->gadget.name = udc_name;
+
+	timer_setup(&m66592->timer, m66592_timer, 0);
+	m66592->reg = reg;
+
+	ret = request_irq(ires->start, m66592_irq, IRQF_SHARED,
+			udc_name, m66592);
+	if (ret < 0) {
+		pr_err("request_irq error (%d)\n", ret);
+		goto clean_up;
+	}
+
+	if (m66592->pdata->on_chip) {
+		snprintf(clk_name, sizeof(clk_name), "usbf%d", pdev->id);
+		m66592->clk = clk_get(&pdev->dev, clk_name);
+		if (IS_ERR(m66592->clk)) {
+			dev_err(&pdev->dev, "cannot get clock \"%s\"\n",
+				clk_name);
+			ret = PTR_ERR(m66592->clk);
+			goto clean_up2;
+		}
+		clk_enable(m66592->clk);
+	}
+
+	INIT_LIST_HEAD(&m66592->gadget.ep_list);
+	m66592->gadget.ep0 = &m66592->ep[0].ep;
+	INIT_LIST_HEAD(&m66592->gadget.ep0->ep_list);
+	for (i = 0; i < M66592_MAX_NUM_PIPE; i++) {
+		struct m66592_ep *ep = &m66592->ep[i];
+
+		if (i != 0) {
+			INIT_LIST_HEAD(&m66592->ep[i].ep.ep_list);
+			list_add_tail(&m66592->ep[i].ep.ep_list,
+					&m66592->gadget.ep_list);
+		}
+		ep->m66592 = m66592;
+		INIT_LIST_HEAD(&ep->queue);
+		ep->ep.name = m66592_ep_name[i];
+		ep->ep.ops = &m66592_ep_ops;
+		usb_ep_set_maxpacket_limit(&ep->ep, 512);
+
+		if (i == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
+	}
+	usb_ep_set_maxpacket_limit(&m66592->ep[0].ep, 64);
+	m66592->ep[0].pipenum = 0;
+	m66592->ep[0].fifoaddr = M66592_CFIFO;
+	m66592->ep[0].fifosel = M66592_CFIFOSEL;
+	m66592->ep[0].fifoctr = M66592_CFIFOCTR;
+	m66592->ep[0].fifotrn = 0;
+	m66592->ep[0].pipectr = get_pipectr_addr(0);
+	m66592->pipenum2ep[0] = &m66592->ep[0];
+	m66592->epaddr2ep[0] = &m66592->ep[0];
+
+	m66592->ep0_req = m66592_alloc_request(&m66592->ep[0].ep, GFP_KERNEL);
+	if (m66592->ep0_req == NULL) {
+		ret = -ENOMEM;
+		goto clean_up3;
+	}
+	m66592->ep0_req->complete = nop_completion;
+
+	init_controller(m66592);
+
+	ret = usb_add_gadget_udc(&pdev->dev, &m66592->gadget);
+	if (ret)
+		goto err_add_udc;
+
+	dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
+	return 0;
+
+err_add_udc:
+	m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req);
+	m66592->ep0_req = NULL;
+clean_up3:
+	if (m66592->pdata->on_chip) {
+		clk_disable(m66592->clk);
+		clk_put(m66592->clk);
+	}
+clean_up2:
+	free_irq(ires->start, m66592);
+clean_up:
+	if (m66592) {
+		if (m66592->ep0_req)
+			m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req);
+		kfree(m66592);
+	}
+	if (reg)
+		iounmap(reg);
+
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+static struct platform_driver m66592_driver = {
+	.remove =	m66592_remove,
+	.driver		= {
+		.name =	udc_name,
+	},
+};
+
+module_platform_driver_probe(m66592_driver, m66592_probe);
diff --git a/drivers/usb/gadget/udc/m66592-udc.h b/drivers/usb/gadget/udc/m66592-udc.h
new file mode 100644
index 000000000..01a64685b
--- /dev/null
+++ b/drivers/usb/gadget/udc/m66592-udc.h
@@ -0,0 +1,603 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * M66592 UDC (USB gadget)
+ *
+ * Copyright (C) 2006-2007 Renesas Solutions Corp.
+ *
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+ */
+
+#ifndef __M66592_UDC_H__
+#define __M66592_UDC_H__
+
+#include <linux/clk.h>
+#include <linux/usb/m66592.h>
+
+#define M66592_SYSCFG		0x00
+#define M66592_XTAL		0xC000	/* b15-14: Crystal selection */
+#define   M66592_XTAL48		 0x8000		/* 48MHz */
+#define   M66592_XTAL24		 0x4000		/* 24MHz */
+#define   M66592_XTAL12		 0x0000		/* 12MHz */
+#define M66592_XCKE		0x2000	/* b13: External clock enable */
+#define M66592_RCKE		0x1000	/* b12: Register clock enable */
+#define M66592_PLLC		0x0800	/* b11: PLL control */
+#define M66592_SCKE		0x0400	/* b10: USB clock enable */
+#define M66592_ATCKM		0x0100	/* b8: Automatic clock supply */
+#define M66592_HSE		0x0080	/* b7: Hi-speed enable */
+#define M66592_DCFM		0x0040	/* b6: Controller function select  */
+#define M66592_DMRPD		0x0020	/* b5: D- pull down control */
+#define M66592_DPRPU		0x0010	/* b4: D+ pull up control */
+#define M66592_FSRPC		0x0004	/* b2: Full-speed receiver enable */
+#define M66592_PCUT		0x0002	/* b1: Low power sleep enable */
+#define M66592_USBE		0x0001	/* b0: USB module operation enable */
+
+#define M66592_SYSSTS		0x02
+#define M66592_LNST		0x0003	/* b1-0: D+, D- line status */
+#define   M66592_SE1		 0x0003		/* SE1 */
+#define   M66592_KSTS		 0x0002		/* K State */
+#define   M66592_JSTS		 0x0001		/* J State */
+#define   M66592_SE0		 0x0000		/* SE0 */
+
+#define M66592_DVSTCTR		0x04
+#define M66592_WKUP		0x0100	/* b8: Remote wakeup */
+#define M66592_RWUPE		0x0080	/* b7: Remote wakeup sense */
+#define M66592_USBRST		0x0040	/* b6: USB reset enable */
+#define M66592_RESUME		0x0020	/* b5: Resume enable */
+#define M66592_UACT		0x0010	/* b4: USB bus enable */
+#define M66592_RHST		0x0003	/* b1-0: Reset handshake status */
+#define   M66592_HSMODE		 0x0003		/* Hi-Speed mode */
+#define   M66592_FSMODE		 0x0002		/* Full-Speed mode */
+#define   M66592_HSPROC		 0x0001		/* HS handshake is processing */
+
+#define M66592_TESTMODE		0x06
+#define M66592_UTST		0x000F	/* b4-0: Test select */
+#define   M66592_H_TST_PACKET	 0x000C		/* HOST TEST Packet */
+#define   M66592_H_TST_SE0_NAK	 0x000B		/* HOST TEST SE0 NAK */
+#define   M66592_H_TST_K	 0x000A		/* HOST TEST K */
+#define   M66592_H_TST_J	 0x0009		/* HOST TEST J */
+#define   M66592_H_TST_NORMAL	 0x0000		/* HOST Normal Mode */
+#define   M66592_P_TST_PACKET	 0x0004		/* PERI TEST Packet */
+#define   M66592_P_TST_SE0_NAK	 0x0003		/* PERI TEST SE0 NAK */
+#define   M66592_P_TST_K	 0x0002		/* PERI TEST K */
+#define   M66592_P_TST_J	 0x0001		/* PERI TEST J */
+#define   M66592_P_TST_NORMAL	 0x0000		/* PERI Normal Mode */
+
+/* built-in registers */
+#define M66592_CFBCFG		0x0A
+#define M66592_D0FBCFG		0x0C
+#define M66592_LITTLE		0x0100	/* b8: Little endian mode */
+/* external chip case */
+#define M66592_PINCFG		0x0A
+#define M66592_LDRV		0x8000	/* b15: Drive Current Adjust */
+#define M66592_BIGEND		0x0100	/* b8: Big endian mode */
+
+#define M66592_DMA0CFG		0x0C
+#define M66592_DMA1CFG		0x0E
+#define M66592_DREQA		0x4000	/* b14: Dreq active select */
+#define M66592_BURST		0x2000	/* b13: Burst mode */
+#define M66592_DACKA		0x0400	/* b10: Dack active select */
+#define M66592_DFORM		0x0380	/* b9-7: DMA mode select */
+#define   M66592_CPU_ADR_RD_WR	 0x0000   /* Address + RD/WR mode (CPU bus) */
+#define   M66592_CPU_DACK_RD_WR	 0x0100   /* DACK + RD/WR mode (CPU bus) */
+#define   M66592_CPU_DACK_ONLY	 0x0180   /* DACK only mode (CPU bus) */
+#define   M66592_SPLIT_DACK_ONLY 0x0200   /* DACK only mode (SPLIT bus) */
+#define   M66592_SPLIT_DACK_DSTB 0x0300   /* DACK + DSTB0 mode (SPLIT bus) */
+#define M66592_DENDA		0x0040	/* b6: Dend active select */
+#define M66592_PKTM		0x0020	/* b5: Packet mode */
+#define M66592_DENDE		0x0010	/* b4: Dend enable */
+#define M66592_OBUS		0x0004	/* b2: OUTbus mode */
+
+/* common case */
+#define M66592_CFIFO		0x10
+#define M66592_D0FIFO		0x14
+#define M66592_D1FIFO		0x18
+
+#define M66592_CFIFOSEL		0x1E
+#define M66592_D0FIFOSEL	0x24
+#define M66592_D1FIFOSEL	0x2A
+#define M66592_RCNT		0x8000	/* b15: Read count mode */
+#define M66592_REW		0x4000	/* b14: Buffer rewind */
+#define M66592_DCLRM		0x2000	/* b13: DMA buffer clear mode */
+#define M66592_DREQE		0x1000	/* b12: DREQ output enable */
+#define M66592_MBW_8		0x0000   /*  8bit */
+#define M66592_MBW_16		0x0400   /* 16bit */
+#define M66592_MBW_32		0x0800   /* 32bit */
+#define M66592_TRENB		0x0200	/* b9: Transaction counter enable */
+#define M66592_TRCLR		0x0100	/* b8: Transaction counter clear */
+#define M66592_DEZPM		0x0080	/* b7: Zero-length packet mode */
+#define M66592_ISEL		0x0020	/* b5: DCP FIFO port direction select */
+#define M66592_CURPIPE		0x0007	/* b2-0: PIPE select */
+
+#define M66592_CFIFOCTR		0x20
+#define M66592_D0FIFOCTR	0x26
+#define M66592_D1FIFOCTR	0x2c
+#define M66592_BVAL		0x8000	/* b15: Buffer valid flag */
+#define M66592_BCLR		0x4000	/* b14: Buffer clear */
+#define M66592_FRDY		0x2000	/* b13: FIFO ready */
+#define M66592_DTLN		0x0FFF	/* b11-0: FIFO received data length */
+
+#define M66592_CFIFOSIE		0x22
+#define M66592_TGL		0x8000	/* b15: Buffer toggle */
+#define M66592_SCLR		0x4000	/* b14: Buffer clear */
+#define M66592_SBUSY		0x2000	/* b13: SIE_FIFO busy */
+
+#define M66592_D0FIFOTRN	0x28
+#define M66592_D1FIFOTRN	0x2E
+#define M66592_TRNCNT		0xFFFF	/* b15-0: Transaction counter */
+
+#define M66592_INTENB0	0x30
+#define M66592_VBSE	0x8000	/* b15: VBUS interrupt */
+#define M66592_RSME	0x4000	/* b14: Resume interrupt */
+#define M66592_SOFE	0x2000	/* b13: Frame update interrupt */
+#define M66592_DVSE	0x1000	/* b12: Device state transition interrupt */
+#define M66592_CTRE	0x0800	/* b11: Control transfer stage transition irq */
+#define M66592_BEMPE	0x0400	/* b10: Buffer empty interrupt */
+#define M66592_NRDYE	0x0200	/* b9: Buffer not ready interrupt */
+#define M66592_BRDYE	0x0100	/* b8: Buffer ready interrupt */
+#define M66592_URST	0x0080	/* b7: USB reset detected interrupt */
+#define M66592_SADR	0x0040	/* b6: Set address executed interrupt */
+#define M66592_SCFG	0x0020	/* b5: Set configuration executed interrupt */
+#define M66592_SUSP	0x0010	/* b4: Suspend detected interrupt */
+#define M66592_WDST	0x0008	/* b3: Control write data stage completed irq */
+#define M66592_RDST	0x0004	/* b2: Control read data stage completed irq */
+#define M66592_CMPL	0x0002	/* b1: Control transfer complete interrupt */
+#define M66592_SERR	0x0001	/* b0: Sequence error interrupt */
+
+#define M66592_INTENB1	0x32
+#define M66592_BCHGE	0x4000	/* b14: USB us chenge interrupt */
+#define M66592_DTCHE	0x1000	/* b12: Detach sense interrupt */
+#define M66592_SIGNE	0x0020	/* b5: SETUP IGNORE interrupt */
+#define M66592_SACKE	0x0010	/* b4: SETUP ACK interrupt */
+#define M66592_BRDYM	0x0004	/* b2: BRDY clear timing */
+#define M66592_INTL	0x0002	/* b1: Interrupt sense select */
+#define M66592_PCSE	0x0001	/* b0: PCUT enable by CS assert */
+
+#define M66592_BRDYENB		0x36
+#define M66592_BRDYSTS		0x46
+#define M66592_BRDY7		0x0080	/* b7: PIPE7 */
+#define M66592_BRDY6		0x0040	/* b6: PIPE6 */
+#define M66592_BRDY5		0x0020	/* b5: PIPE5 */
+#define M66592_BRDY4		0x0010	/* b4: PIPE4 */
+#define M66592_BRDY3		0x0008	/* b3: PIPE3 */
+#define M66592_BRDY2		0x0004	/* b2: PIPE2 */
+#define M66592_BRDY1		0x0002	/* b1: PIPE1 */
+#define M66592_BRDY0		0x0001	/* b1: PIPE0 */
+
+#define M66592_NRDYENB		0x38
+#define M66592_NRDYSTS		0x48
+#define M66592_NRDY7		0x0080	/* b7: PIPE7 */
+#define M66592_NRDY6		0x0040	/* b6: PIPE6 */
+#define M66592_NRDY5		0x0020	/* b5: PIPE5 */
+#define M66592_NRDY4		0x0010	/* b4: PIPE4 */
+#define M66592_NRDY3		0x0008	/* b3: PIPE3 */
+#define M66592_NRDY2		0x0004	/* b2: PIPE2 */
+#define M66592_NRDY1		0x0002	/* b1: PIPE1 */
+#define M66592_NRDY0		0x0001	/* b1: PIPE0 */
+
+#define M66592_BEMPENB		0x3A
+#define M66592_BEMPSTS		0x4A
+#define M66592_BEMP7		0x0080	/* b7: PIPE7 */
+#define M66592_BEMP6		0x0040	/* b6: PIPE6 */
+#define M66592_BEMP5		0x0020	/* b5: PIPE5 */
+#define M66592_BEMP4		0x0010	/* b4: PIPE4 */
+#define M66592_BEMP3		0x0008	/* b3: PIPE3 */
+#define M66592_BEMP2		0x0004	/* b2: PIPE2 */
+#define M66592_BEMP1		0x0002	/* b1: PIPE1 */
+#define M66592_BEMP0		0x0001	/* b0: PIPE0 */
+
+#define M66592_SOFCFG		0x3C
+#define M66592_SOFM		0x000C	/* b3-2: SOF palse mode */
+#define   M66592_SOF_125US	 0x0008   /* SOF OUT 125us uFrame Signal */
+#define   M66592_SOF_1MS	 0x0004   /* SOF OUT 1ms Frame Signal */
+#define   M66592_SOF_DISABLE	 0x0000   /* SOF OUT Disable */
+
+#define M66592_INTSTS0		0x40
+#define M66592_VBINT		0x8000	/* b15: VBUS interrupt */
+#define M66592_RESM		0x4000	/* b14: Resume interrupt */
+#define M66592_SOFR		0x2000	/* b13: SOF frame update interrupt */
+#define M66592_DVST		0x1000	/* b12: Device state transition */
+#define M66592_CTRT		0x0800	/* b11: Control stage transition */
+#define M66592_BEMP		0x0400	/* b10: Buffer empty interrupt */
+#define M66592_NRDY		0x0200	/* b9: Buffer not ready interrupt */
+#define M66592_BRDY		0x0100	/* b8: Buffer ready interrupt */
+#define M66592_VBSTS		0x0080	/* b7: VBUS input port */
+#define M66592_DVSQ		0x0070	/* b6-4: Device state */
+#define   M66592_DS_SPD_CNFG	 0x0070	   /* Suspend Configured */
+#define   M66592_DS_SPD_ADDR	 0x0060	   /* Suspend Address */
+#define   M66592_DS_SPD_DFLT	 0x0050	   /* Suspend Default */
+#define   M66592_DS_SPD_POWR	 0x0040	   /* Suspend Powered */
+#define   M66592_DS_SUSP	 0x0040	   /* Suspend */
+#define   M66592_DS_CNFG	 0x0030	   /* Configured */
+#define   M66592_DS_ADDS	 0x0020	   /* Address */
+#define   M66592_DS_DFLT	 0x0010	   /* Default */
+#define   M66592_DS_POWR	 0x0000	   /* Powered */
+#define M66592_DVSQS		0x0030	/* b5-4: Device state */
+#define M66592_VALID		0x0008	/* b3: Setup packet detected flag */
+#define M66592_CTSQ		0x0007	/* b2-0: Control transfer stage */
+#define   M66592_CS_SQER	 0x0006	  /* Sequence error */
+#define   M66592_CS_WRND	 0x0005	  /* Control write nodata status */
+#define   M66592_CS_WRSS	 0x0004	  /* Control write status stage */
+#define   M66592_CS_WRDS	 0x0003	  /* Control write data stage */
+#define   M66592_CS_RDSS	 0x0002	  /* Control read status stage */
+#define   M66592_CS_RDDS	 0x0001	  /* Control read data stage */
+#define   M66592_CS_IDST	 0x0000	  /* Idle or setup stage */
+
+#define M66592_INTSTS1		0x42
+#define M66592_BCHG		0x4000	/* b14: USB bus chenge interrupt */
+#define M66592_DTCH		0x1000	/* b12: Detach sense interrupt */
+#define M66592_SIGN		0x0020	/* b5: SETUP IGNORE interrupt */
+#define M66592_SACK		0x0010	/* b4: SETUP ACK interrupt */
+
+#define M66592_FRMNUM		0x4C
+#define M66592_OVRN		0x8000	/* b15: Overrun error */
+#define M66592_CRCE		0x4000	/* b14: Received data error */
+#define M66592_SOFRM		0x0800	/* b11: SOF output mode */
+#define M66592_FRNM		0x07FF	/* b10-0: Frame number */
+
+#define M66592_UFRMNUM		0x4E
+#define M66592_UFRNM		0x0007	/* b2-0: Micro frame number */
+
+#define M66592_RECOVER		0x50
+#define M66592_STSRECOV		0x0700	/* Status recovery */
+#define   M66592_STSR_HI	 0x0400		  /* FULL(0) or HI(1) Speed */
+#define   M66592_STSR_DEFAULT	 0x0100		  /* Default state */
+#define   M66592_STSR_ADDRESS	 0x0200		  /* Address state */
+#define   M66592_STSR_CONFIG	 0x0300		  /* Configured state */
+#define M66592_USBADDR		0x007F	/* b6-0: USB address */
+
+#define M66592_USBREQ			0x54
+#define M66592_bRequest			0xFF00	/* b15-8: bRequest */
+#define   M66592_GET_STATUS		 0x0000
+#define   M66592_CLEAR_FEATURE		 0x0100
+#define   M66592_ReqRESERVED		 0x0200
+#define   M66592_SET_FEATURE		 0x0300
+#define   M66592_ReqRESERVED1		 0x0400
+#define   M66592_SET_ADDRESS		 0x0500
+#define   M66592_GET_DESCRIPTOR		 0x0600
+#define   M66592_SET_DESCRIPTOR		 0x0700
+#define   M66592_GET_CONFIGURATION	 0x0800
+#define   M66592_SET_CONFIGURATION	 0x0900
+#define   M66592_GET_INTERFACE		 0x0A00
+#define   M66592_SET_INTERFACE		 0x0B00
+#define   M66592_SYNCH_FRAME		 0x0C00
+#define M66592_bmRequestType		0x00FF	/* b7-0: bmRequestType */
+#define M66592_bmRequestTypeDir		0x0080	/* b7  : Data direction */
+#define   M66592_HOST_TO_DEVICE		 0x0000
+#define   M66592_DEVICE_TO_HOST		 0x0080
+#define M66592_bmRequestTypeType	0x0060	/* b6-5: Type */
+#define   M66592_STANDARD		 0x0000
+#define   M66592_CLASS			 0x0020
+#define   M66592_VENDOR			 0x0040
+#define M66592_bmRequestTypeRecip	0x001F	/* b4-0: Recipient */
+#define   M66592_DEVICE			 0x0000
+#define   M66592_INTERFACE		 0x0001
+#define   M66592_ENDPOINT		 0x0002
+
+#define M66592_USBVAL				0x56
+#define M66592_wValue				0xFFFF	/* b15-0: wValue */
+/* Standard Feature Selector */
+#define   M66592_ENDPOINT_HALT			0x0000
+#define   M66592_DEVICE_REMOTE_WAKEUP		0x0001
+#define   M66592_TEST_MODE			0x0002
+/* Descriptor Types */
+#define M66592_DT_TYPE				0xFF00
+#define M66592_GET_DT_TYPE(v)			(((v) & DT_TYPE) >> 8)
+#define   M66592_DT_DEVICE			0x01
+#define   M66592_DT_CONFIGURATION		0x02
+#define   M66592_DT_STRING			0x03
+#define   M66592_DT_INTERFACE			0x04
+#define   M66592_DT_ENDPOINT			0x05
+#define   M66592_DT_DEVICE_QUALIFIER		0x06
+#define   M66592_DT_OTHER_SPEED_CONFIGURATION	0x07
+#define   M66592_DT_INTERFACE_POWER		0x08
+#define M66592_DT_INDEX				0x00FF
+#define M66592_CONF_NUM				0x00FF
+#define M66592_ALT_SET				0x00FF
+
+#define M66592_USBINDEX			0x58
+#define M66592_wIndex			0xFFFF	/* b15-0: wIndex */
+#define M66592_TEST_SELECT		0xFF00	/* b15-b8: Test Mode */
+#define   M66592_TEST_J			 0x0100	  /* Test_J */
+#define   M66592_TEST_K			 0x0200	  /* Test_K */
+#define   M66592_TEST_SE0_NAK		 0x0300	  /* Test_SE0_NAK */
+#define   M66592_TEST_PACKET		 0x0400	  /* Test_Packet */
+#define   M66592_TEST_FORCE_ENABLE	 0x0500	  /* Test_Force_Enable */
+#define   M66592_TEST_STSelectors	 0x0600	  /* Standard test selectors */
+#define   M66592_TEST_Reserved		 0x4000	  /* Reserved */
+#define   M66592_TEST_VSTModes		 0xC000	  /* Vendor-specific tests */
+#define M66592_EP_DIR			0x0080	/* b7: Endpoint Direction */
+#define   M66592_EP_DIR_IN		 0x0080
+#define   M66592_EP_DIR_OUT		 0x0000
+
+#define M66592_USBLENG		0x5A
+#define M66592_wLength		0xFFFF	/* b15-0: wLength */
+
+#define M66592_DCPCFG		0x5C
+#define M66592_CNTMD		0x0100	/* b8: Continuous transfer mode */
+#define M66592_DIR		0x0010	/* b4: Control transfer DIR select */
+
+#define M66592_DCPMAXP		0x5E
+#define M66592_DEVSEL		0xC000	/* b15-14: Device address select */
+#define   M66592_DEVICE_0	 0x0000		  /* Device address 0 */
+#define   M66592_DEVICE_1	 0x4000		  /* Device address 1 */
+#define   M66592_DEVICE_2	 0x8000		  /* Device address 2 */
+#define   M66592_DEVICE_3	 0xC000		  /* Device address 3 */
+#define M66592_MAXP		0x007F	/* b6-0: Maxpacket size of ep0 */
+
+#define M66592_DCPCTR		0x60
+#define M66592_BSTS		0x8000	/* b15: Buffer status */
+#define M66592_SUREQ		0x4000	/* b14: Send USB request  */
+#define M66592_SQCLR		0x0100	/* b8: Sequence toggle bit clear */
+#define M66592_SQSET		0x0080	/* b7: Sequence toggle bit set */
+#define M66592_SQMON		0x0040	/* b6: Sequence toggle bit monitor */
+#define M66592_CCPL		0x0004	/* b2: control transfer complete */
+#define M66592_PID		0x0003	/* b1-0: Response PID */
+#define   M66592_PID_STALL	 0x0002		  /* STALL */
+#define   M66592_PID_BUF	 0x0001		  /* BUF */
+#define   M66592_PID_NAK	 0x0000		  /* NAK */
+
+#define M66592_PIPESEL		0x64
+#define M66592_PIPENM		0x0007	/* b2-0: Pipe select */
+#define   M66592_PIPE0		 0x0000		  /* PIPE 0 */
+#define   M66592_PIPE1		 0x0001		  /* PIPE 1 */
+#define   M66592_PIPE2		 0x0002		  /* PIPE 2 */
+#define   M66592_PIPE3		 0x0003		  /* PIPE 3 */
+#define   M66592_PIPE4		 0x0004		  /* PIPE 4 */
+#define   M66592_PIPE5		 0x0005		  /* PIPE 5 */
+#define   M66592_PIPE6		 0x0006		  /* PIPE 6 */
+#define   M66592_PIPE7		 0x0007		  /* PIPE 7 */
+
+#define M66592_PIPECFG		0x66
+#define M66592_TYP		0xC000	/* b15-14: Transfer type */
+#define   M66592_ISO		 0xC000		  /* Isochronous */
+#define   M66592_INT		 0x8000		  /* Interrupt */
+#define   M66592_BULK		 0x4000		  /* Bulk */
+#define M66592_BFRE		0x0400	/* b10: Buffer ready interrupt mode */
+#define M66592_DBLB		0x0200	/* b9: Double buffer mode select */
+#define M66592_CNTMD		0x0100	/* b8: Continuous transfer mode */
+#define M66592_SHTNAK		0x0080	/* b7: Transfer end NAK */
+#define M66592_DIR		0x0010	/* b4: Transfer direction select */
+#define   M66592_DIR_H_OUT	 0x0010		  /* HOST OUT */
+#define   M66592_DIR_P_IN	 0x0010		  /* PERI IN */
+#define   M66592_DIR_H_IN	 0x0000		  /* HOST IN */
+#define   M66592_DIR_P_OUT	 0x0000		  /* PERI OUT */
+#define M66592_EPNUM		0x000F	/* b3-0: Eendpoint number select */
+#define   M66592_EP1		 0x0001
+#define   M66592_EP2		 0x0002
+#define   M66592_EP3		 0x0003
+#define   M66592_EP4		 0x0004
+#define   M66592_EP5		 0x0005
+#define   M66592_EP6		 0x0006
+#define   M66592_EP7		 0x0007
+#define   M66592_EP8		 0x0008
+#define   M66592_EP9		 0x0009
+#define   M66592_EP10		 0x000A
+#define   M66592_EP11		 0x000B
+#define   M66592_EP12		 0x000C
+#define   M66592_EP13		 0x000D
+#define   M66592_EP14		 0x000E
+#define   M66592_EP15		 0x000F
+
+#define M66592_PIPEBUF		0x68
+#define M66592_BUFSIZE		0x7C00	/* b14-10: Pipe buffer size */
+#define M66592_BUF_SIZE(x)	((((x) / 64) - 1) << 10)
+#define M66592_BUFNMB		0x00FF	/* b7-0: Pipe buffer number */
+
+#define M66592_PIPEMAXP		0x6A
+#define M66592_MXPS		0x07FF	/* b10-0: Maxpacket size */
+
+#define M66592_PIPEPERI		0x6C
+#define M66592_IFIS		0x1000	/* b12: ISO in-buffer flush mode */
+#define M66592_IITV		0x0007	/* b2-0: ISO interval */
+
+#define M66592_PIPE1CTR		0x70
+#define M66592_PIPE2CTR		0x72
+#define M66592_PIPE3CTR		0x74
+#define M66592_PIPE4CTR		0x76
+#define M66592_PIPE5CTR		0x78
+#define M66592_PIPE6CTR		0x7A
+#define M66592_PIPE7CTR		0x7C
+#define M66592_BSTS		0x8000	/* b15: Buffer status */
+#define M66592_INBUFM		0x4000	/* b14: IN buffer monitor (PIPE 1-5) */
+#define M66592_ACLRM		0x0200	/* b9: Out buffer auto clear mode */
+#define M66592_SQCLR		0x0100	/* b8: Sequence toggle bit clear */
+#define M66592_SQSET		0x0080	/* b7: Sequence toggle bit set */
+#define M66592_SQMON		0x0040	/* b6: Sequence toggle bit monitor */
+#define M66592_PID		0x0003	/* b1-0: Response PID */
+
+#define M66592_INVALID_REG	0x7E
+
+
+#define get_pipectr_addr(pipenum)	(M66592_PIPE1CTR + (pipenum - 1) * 2)
+
+#define M66592_MAX_SAMPLING	10
+
+#define M66592_MAX_NUM_PIPE	8
+#define M66592_MAX_NUM_BULK	3
+#define M66592_MAX_NUM_ISOC	2
+#define M66592_MAX_NUM_INT	2
+
+#define M66592_BASE_PIPENUM_BULK	3
+#define M66592_BASE_PIPENUM_ISOC	1
+#define M66592_BASE_PIPENUM_INT		6
+
+#define M66592_BASE_BUFNUM	6
+#define M66592_MAX_BUFNUM	0x4F
+
+struct m66592_pipe_info {
+	u16	pipe;
+	u16	epnum;
+	u16	maxpacket;
+	u16	type;
+	u16	interval;
+	u16	dir_in;
+};
+
+struct m66592_request {
+	struct usb_request	req;
+	struct list_head	queue;
+};
+
+struct m66592_ep {
+	struct usb_ep		ep;
+	struct m66592		*m66592;
+
+	struct list_head	queue;
+	unsigned		busy:1;
+	unsigned		internal_ccpl:1;	/* use only control */
+
+	/* this member can able to after m66592_enable */
+	unsigned		use_dma:1;
+	u16			pipenum;
+	u16			type;
+
+	/* register address */
+	unsigned long		fifoaddr;
+	unsigned long		fifosel;
+	unsigned long		fifoctr;
+	unsigned long		fifotrn;
+	unsigned long		pipectr;
+};
+
+struct m66592 {
+	spinlock_t		lock;
+	void __iomem		*reg;
+	struct clk *clk;
+	struct m66592_platdata	*pdata;
+	unsigned long		irq_trigger;
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+
+	struct m66592_ep	ep[M66592_MAX_NUM_PIPE];
+	struct m66592_ep	*pipenum2ep[M66592_MAX_NUM_PIPE];
+	struct m66592_ep	*epaddr2ep[16];
+
+	struct usb_request	*ep0_req;	/* for internal request */
+	__le16			ep0_data;	/* for internal request */
+	u16			old_vbus;
+
+	struct timer_list	timer;
+
+	int			scount;
+
+	int			old_dvsq;
+
+	/* pipe config */
+	int bulk;
+	int interrupt;
+	int isochronous;
+	int num_dma;
+};
+#define to_m66592(g)	(container_of((g), struct m66592, gadget))
+
+#define gadget_to_m66592(_gadget) container_of(_gadget, struct m66592, gadget)
+#define m66592_to_gadget(m66592) (&m66592->gadget)
+
+#define is_bulk_pipe(pipenum)	\
+	((pipenum >= M66592_BASE_PIPENUM_BULK) && \
+	 (pipenum < (M66592_BASE_PIPENUM_BULK + M66592_MAX_NUM_BULK)))
+#define is_interrupt_pipe(pipenum)	\
+	((pipenum >= M66592_BASE_PIPENUM_INT) && \
+	 (pipenum < (M66592_BASE_PIPENUM_INT + M66592_MAX_NUM_INT)))
+#define is_isoc_pipe(pipenum)	\
+	((pipenum >= M66592_BASE_PIPENUM_ISOC) && \
+	 (pipenum < (M66592_BASE_PIPENUM_ISOC + M66592_MAX_NUM_ISOC)))
+
+#define enable_irq_ready(m66592, pipenum)	\
+	enable_pipe_irq(m66592, pipenum, M66592_BRDYENB)
+#define disable_irq_ready(m66592, pipenum)	\
+	disable_pipe_irq(m66592, pipenum, M66592_BRDYENB)
+#define enable_irq_empty(m66592, pipenum)	\
+	enable_pipe_irq(m66592, pipenum, M66592_BEMPENB)
+#define disable_irq_empty(m66592, pipenum)	\
+	disable_pipe_irq(m66592, pipenum, M66592_BEMPENB)
+#define enable_irq_nrdy(m66592, pipenum)	\
+	enable_pipe_irq(m66592, pipenum, M66592_NRDYENB)
+#define disable_irq_nrdy(m66592, pipenum)	\
+	disable_pipe_irq(m66592, pipenum, M66592_NRDYENB)
+
+/*-------------------------------------------------------------------------*/
+static inline u16 m66592_read(struct m66592 *m66592, unsigned long offset)
+{
+	return ioread16(m66592->reg + offset);
+}
+
+static inline void m66592_read_fifo(struct m66592 *m66592,
+		unsigned long offset,
+		void *buf, unsigned long len)
+{
+	void __iomem *fifoaddr = m66592->reg + offset;
+
+	if (m66592->pdata->on_chip) {
+		len = (len + 3) / 4;
+		ioread32_rep(fifoaddr, buf, len);
+	} else {
+		len = (len + 1) / 2;
+		ioread16_rep(fifoaddr, buf, len);
+	}
+}
+
+static inline void m66592_write(struct m66592 *m66592, u16 val,
+				unsigned long offset)
+{
+	iowrite16(val, m66592->reg + offset);
+}
+
+static inline void m66592_mdfy(struct m66592 *m66592, u16 val, u16 pat,
+		unsigned long offset)
+{
+	u16 tmp;
+	tmp = m66592_read(m66592, offset);
+	tmp = tmp & (~pat);
+	tmp = tmp | val;
+	m66592_write(m66592, tmp, offset);
+}
+
+#define m66592_bclr(m66592, val, offset)	\
+			m66592_mdfy(m66592, 0, val, offset)
+#define m66592_bset(m66592, val, offset)	\
+			m66592_mdfy(m66592, val, 0, offset)
+
+static inline void m66592_write_fifo(struct m66592 *m66592,
+		struct m66592_ep *ep,
+		void *buf, unsigned long len)
+{
+	void __iomem *fifoaddr = m66592->reg + ep->fifoaddr;
+
+	if (m66592->pdata->on_chip) {
+		unsigned long count;
+		unsigned char *pb;
+		int i;
+
+		count = len / 4;
+		iowrite32_rep(fifoaddr, buf, count);
+
+		if (len & 0x00000003) {
+			pb = buf + count * 4;
+			for (i = 0; i < (len & 0x00000003); i++) {
+				if (m66592_read(m66592, M66592_CFBCFG))	/* le */
+					iowrite8(pb[i], fifoaddr + (3 - i));
+				else
+					iowrite8(pb[i], fifoaddr + i);
+			}
+		}
+	} else {
+		unsigned long odd = len & 0x0001;
+
+		len = len / 2;
+		iowrite16_rep(fifoaddr, buf, len);
+		if (odd) {
+			unsigned char *p = buf + len*2;
+			if (m66592->pdata->wr0_shorted_to_wr1)
+				m66592_bclr(m66592, M66592_MBW_16, ep->fifosel);
+			iowrite8(*p, fifoaddr);
+			if (m66592->pdata->wr0_shorted_to_wr1)
+				m66592_bset(m66592, M66592_MBW_16, ep->fifosel);
+		}
+	}
+}
+
+#endif	/* ifndef __M66592_UDC_H__ */
+
+
diff --git a/drivers/usb/gadget/udc/max3420_udc.c b/drivers/usb/gadget/udc/max3420_udc.c
new file mode 100644
index 000000000..ddf0ed3eb
--- /dev/null
+++ b/drivers/usb/gadget/udc/max3420_udc.c
@@ -0,0 +1,1332 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * MAX3420 Device Controller driver for USB.
+ *
+ * Author: Jaswinder Singh Brar <jaswinder.singh@linaro.org>
+ * (C) Copyright 2019-2020 Linaro Ltd
+ *
+ * Based on:
+ *	o MAX3420E datasheet
+ *		https://datasheets.maximintegrated.com/en/ds/MAX3420E.pdf
+ *	o MAX342{0,1}E Programming Guides
+ *		https://pdfserv.maximintegrated.com/en/an/AN3598.pdf
+ *		https://pdfserv.maximintegrated.com/en/an/AN3785.pdf
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/bitfield.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/prefetch.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio/consumer.h>
+
+#define MAX3420_MAX_EPS		4
+#define MAX3420_EP_MAX_PACKET		64  /* Same for all Endpoints */
+#define MAX3420_EPNAME_SIZE		16  /* Buffer size for endpoint name */
+
+#define MAX3420_ACKSTAT		BIT(0)
+
+#define MAX3420_SPI_DIR_RD	0	/* read register from MAX3420 */
+#define MAX3420_SPI_DIR_WR	1	/* write register to MAX3420 */
+
+/* SPI commands: */
+#define MAX3420_SPI_DIR_SHIFT	1
+#define MAX3420_SPI_REG_SHIFT	3
+
+#define MAX3420_REG_EP0FIFO	0
+#define MAX3420_REG_EP1FIFO	1
+#define MAX3420_REG_EP2FIFO	2
+#define MAX3420_REG_EP3FIFO	3
+#define MAX3420_REG_SUDFIFO	4
+#define MAX3420_REG_EP0BC	5
+#define MAX3420_REG_EP1BC	6
+#define MAX3420_REG_EP2BC	7
+#define MAX3420_REG_EP3BC	8
+
+#define MAX3420_REG_EPSTALLS	9
+	#define ACKSTAT		BIT(6)
+	#define STLSTAT		BIT(5)
+	#define STLEP3IN	BIT(4)
+	#define STLEP2IN	BIT(3)
+	#define STLEP1OUT	BIT(2)
+	#define STLEP0OUT	BIT(1)
+	#define STLEP0IN	BIT(0)
+
+#define MAX3420_REG_CLRTOGS	10
+	#define EP3DISAB	BIT(7)
+	#define EP2DISAB	BIT(6)
+	#define EP1DISAB	BIT(5)
+	#define CTGEP3IN	BIT(4)
+	#define CTGEP2IN	BIT(3)
+	#define CTGEP1OUT	BIT(2)
+
+#define MAX3420_REG_EPIRQ	11
+#define MAX3420_REG_EPIEN	12
+	#define SUDAVIRQ	BIT(5)
+	#define IN3BAVIRQ	BIT(4)
+	#define IN2BAVIRQ	BIT(3)
+	#define OUT1DAVIRQ	BIT(2)
+	#define OUT0DAVIRQ	BIT(1)
+	#define IN0BAVIRQ	BIT(0)
+
+#define MAX3420_REG_USBIRQ	13
+#define MAX3420_REG_USBIEN	14
+	#define OSCOKIRQ	BIT(0)
+	#define RWUDNIRQ	BIT(1)
+	#define BUSACTIRQ	BIT(2)
+	#define URESIRQ		BIT(3)
+	#define SUSPIRQ		BIT(4)
+	#define NOVBUSIRQ	BIT(5)
+	#define VBUSIRQ		BIT(6)
+	#define URESDNIRQ	BIT(7)
+
+#define MAX3420_REG_USBCTL	15
+	#define HOSCSTEN	BIT(7)
+	#define VBGATE		BIT(6)
+	#define CHIPRES		BIT(5)
+	#define PWRDOWN		BIT(4)
+	#define CONNECT		BIT(3)
+	#define SIGRWU		BIT(2)
+
+#define MAX3420_REG_CPUCTL	16
+	#define IE		BIT(0)
+
+#define MAX3420_REG_PINCTL	17
+	#define EP3INAK		BIT(7)
+	#define EP2INAK		BIT(6)
+	#define EP0INAK		BIT(5)
+	#define FDUPSPI		BIT(4)
+	#define INTLEVEL	BIT(3)
+	#define POSINT		BIT(2)
+	#define GPXB		BIT(1)
+	#define GPXA		BIT(0)
+
+#define MAX3420_REG_REVISION	18
+
+#define MAX3420_REG_FNADDR	19
+	#define FNADDR_MASK	0x7f
+
+#define MAX3420_REG_IOPINS	20
+#define MAX3420_REG_IOPINS2	21
+#define MAX3420_REG_GPINIRQ	22
+#define MAX3420_REG_GPINIEN	23
+#define MAX3420_REG_GPINPOL	24
+#define MAX3420_REG_HIRQ	25
+#define MAX3420_REG_HIEN	26
+#define MAX3420_REG_MODE	27
+#define MAX3420_REG_PERADDR	28
+#define MAX3420_REG_HCTL	29
+#define MAX3420_REG_HXFR	30
+#define MAX3420_REG_HRSL	31
+
+#define ENABLE_IRQ	BIT(0)
+#define IOPIN_UPDATE	BIT(1)
+#define REMOTE_WAKEUP	BIT(2)
+#define CONNECT_HOST	GENMASK(4, 3)
+#define	HCONNECT	(1 << 3)
+#define	HDISCONNECT	(3 << 3)
+#define UDC_START	GENMASK(6, 5)
+#define	START		(1 << 5)
+#define	STOP		(3 << 5)
+#define ENABLE_EP	GENMASK(8, 7)
+#define	ENABLE		(1 << 7)
+#define	DISABLE		(3 << 7)
+#define STALL_EP	GENMASK(10, 9)
+#define	STALL		(1 << 9)
+#define	UNSTALL		(3 << 9)
+
+#define MAX3420_CMD(c)		FIELD_PREP(GENMASK(7, 3), c)
+#define MAX3420_SPI_CMD_RD(c)	(MAX3420_CMD(c) | (0 << 1))
+#define MAX3420_SPI_CMD_WR(c)	(MAX3420_CMD(c) | (1 << 1))
+
+struct max3420_req {
+	struct usb_request usb_req;
+	struct list_head queue;
+	struct max3420_ep *ep;
+};
+
+struct max3420_ep {
+	struct usb_ep ep_usb;
+	struct max3420_udc *udc;
+	struct list_head queue;
+	char name[MAX3420_EPNAME_SIZE];
+	unsigned int maxpacket;
+	spinlock_t lock;
+	int halted;
+	u32 todo;
+	int id;
+};
+
+struct max3420_udc {
+	struct usb_gadget gadget;
+	struct max3420_ep ep[MAX3420_MAX_EPS];
+	struct usb_gadget_driver *driver;
+	struct task_struct *thread_task;
+	int remote_wkp, is_selfpowered;
+	bool vbus_active, softconnect;
+	struct usb_ctrlrequest setup;
+	struct mutex spi_bus_mutex;
+	struct max3420_req ep0req;
+	struct spi_device *spi;
+	struct device *dev;
+	spinlock_t lock;
+	bool suspended;
+	u8 ep0buf[64];
+	u32 todo;
+};
+
+#define to_max3420_req(r)	container_of((r), struct max3420_req, usb_req)
+#define to_max3420_ep(e)	container_of((e), struct max3420_ep, ep_usb)
+#define to_udc(g)		container_of((g), struct max3420_udc, gadget)
+
+#define DRIVER_DESC     "MAX3420 USB Device-Mode Driver"
+static const char driver_name[] = "max3420-udc";
+
+/* Control endpoint configuration.*/
+static const struct usb_endpoint_descriptor ep0_desc = {
+	.bEndpointAddress	= USB_DIR_OUT,
+	.bmAttributes		= USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize		= cpu_to_le16(MAX3420_EP_MAX_PACKET),
+};
+
+static void spi_ack_ctrl(struct max3420_udc *udc)
+{
+	struct spi_device *spi = udc->spi;
+	struct spi_transfer transfer;
+	struct spi_message msg;
+	u8 txdata[1];
+
+	memset(&transfer, 0, sizeof(transfer));
+
+	spi_message_init(&msg);
+
+	txdata[0] = MAX3420_ACKSTAT;
+	transfer.tx_buf = txdata;
+	transfer.len = 1;
+
+	spi_message_add_tail(&transfer, &msg);
+	spi_sync(spi, &msg);
+}
+
+static u8 spi_rd8_ack(struct max3420_udc *udc, u8 reg, int actstat)
+{
+	struct spi_device *spi = udc->spi;
+	struct spi_transfer transfer;
+	struct spi_message msg;
+	u8 txdata[2], rxdata[2];
+
+	memset(&transfer, 0, sizeof(transfer));
+
+	spi_message_init(&msg);
+
+	txdata[0] = MAX3420_SPI_CMD_RD(reg) | (actstat ? MAX3420_ACKSTAT : 0);
+	transfer.tx_buf = txdata;
+	transfer.rx_buf = rxdata;
+	transfer.len = 2;
+
+	spi_message_add_tail(&transfer, &msg);
+	spi_sync(spi, &msg);
+
+	return rxdata[1];
+}
+
+static u8 spi_rd8(struct max3420_udc *udc, u8 reg)
+{
+	return spi_rd8_ack(udc, reg, 0);
+}
+
+static void spi_wr8_ack(struct max3420_udc *udc, u8 reg, u8 val, int actstat)
+{
+	struct spi_device *spi = udc->spi;
+	struct spi_transfer transfer;
+	struct spi_message msg;
+	u8 txdata[2];
+
+	memset(&transfer, 0, sizeof(transfer));
+
+	spi_message_init(&msg);
+
+	txdata[0] = MAX3420_SPI_CMD_WR(reg) | (actstat ? MAX3420_ACKSTAT : 0);
+	txdata[1] = val;
+
+	transfer.tx_buf = txdata;
+	transfer.len = 2;
+
+	spi_message_add_tail(&transfer, &msg);
+	spi_sync(spi, &msg);
+}
+
+static void spi_wr8(struct max3420_udc *udc, u8 reg, u8 val)
+{
+	spi_wr8_ack(udc, reg, val, 0);
+}
+
+static void spi_rd_buf(struct max3420_udc *udc, u8 reg, void *buf, u8 len)
+{
+	struct spi_device *spi = udc->spi;
+	struct spi_transfer transfer;
+	struct spi_message msg;
+	u8 local_buf[MAX3420_EP_MAX_PACKET + 1] = {};
+
+	memset(&transfer, 0, sizeof(transfer));
+
+	spi_message_init(&msg);
+
+	local_buf[0] = MAX3420_SPI_CMD_RD(reg);
+	transfer.tx_buf = &local_buf[0];
+	transfer.rx_buf = &local_buf[0];
+	transfer.len = len + 1;
+
+	spi_message_add_tail(&transfer, &msg);
+	spi_sync(spi, &msg);
+
+	memcpy(buf, &local_buf[1], len);
+}
+
+static void spi_wr_buf(struct max3420_udc *udc, u8 reg, void *buf, u8 len)
+{
+	struct spi_device *spi = udc->spi;
+	struct spi_transfer transfer;
+	struct spi_message msg;
+	u8 local_buf[MAX3420_EP_MAX_PACKET + 1] = {};
+
+	memset(&transfer, 0, sizeof(transfer));
+
+	spi_message_init(&msg);
+
+	local_buf[0] = MAX3420_SPI_CMD_WR(reg);
+	memcpy(&local_buf[1], buf, len);
+
+	transfer.tx_buf = local_buf;
+	transfer.len = len + 1;
+
+	spi_message_add_tail(&transfer, &msg);
+	spi_sync(spi, &msg);
+}
+
+static int spi_max3420_enable(struct max3420_ep *ep)
+{
+	struct max3420_udc *udc = ep->udc;
+	unsigned long flags;
+	u8 epdis, epien;
+	int todo;
+
+	spin_lock_irqsave(&ep->lock, flags);
+	todo = ep->todo & ENABLE_EP;
+	ep->todo &= ~ENABLE_EP;
+	spin_unlock_irqrestore(&ep->lock, flags);
+
+	if (!todo || ep->id == 0)
+		return false;
+
+	epien = spi_rd8(udc, MAX3420_REG_EPIEN);
+	epdis = spi_rd8(udc, MAX3420_REG_CLRTOGS);
+
+	if (todo == ENABLE) {
+		epdis &= ~BIT(ep->id + 4);
+		epien |= BIT(ep->id + 1);
+	} else {
+		epdis |= BIT(ep->id + 4);
+		epien &= ~BIT(ep->id + 1);
+	}
+
+	spi_wr8(udc, MAX3420_REG_CLRTOGS, epdis);
+	spi_wr8(udc, MAX3420_REG_EPIEN, epien);
+
+	return true;
+}
+
+static int spi_max3420_stall(struct max3420_ep *ep)
+{
+	struct max3420_udc *udc = ep->udc;
+	unsigned long flags;
+	u8 epstalls;
+	int todo;
+
+	spin_lock_irqsave(&ep->lock, flags);
+	todo = ep->todo & STALL_EP;
+	ep->todo &= ~STALL_EP;
+	spin_unlock_irqrestore(&ep->lock, flags);
+
+	if (!todo || ep->id == 0)
+		return false;
+
+	epstalls = spi_rd8(udc, MAX3420_REG_EPSTALLS);
+	if (todo == STALL) {
+		ep->halted = 1;
+		epstalls |= BIT(ep->id + 1);
+	} else {
+		u8 clrtogs;
+
+		ep->halted = 0;
+		epstalls &= ~BIT(ep->id + 1);
+		clrtogs = spi_rd8(udc, MAX3420_REG_CLRTOGS);
+		clrtogs |= BIT(ep->id + 1);
+		spi_wr8(udc, MAX3420_REG_CLRTOGS, clrtogs);
+	}
+	spi_wr8(udc, MAX3420_REG_EPSTALLS, epstalls | ACKSTAT);
+
+	return true;
+}
+
+static int spi_max3420_rwkup(struct max3420_udc *udc)
+{
+	unsigned long flags;
+	int wake_remote;
+	u8 usbctl;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	wake_remote = udc->todo & REMOTE_WAKEUP;
+	udc->todo &= ~REMOTE_WAKEUP;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (!wake_remote || !udc->suspended)
+		return false;
+
+	/* Set Remote-WkUp Signal*/
+	usbctl = spi_rd8(udc, MAX3420_REG_USBCTL);
+	usbctl |= SIGRWU;
+	spi_wr8(udc, MAX3420_REG_USBCTL, usbctl);
+
+	msleep_interruptible(5);
+
+	/* Clear Remote-WkUp Signal*/
+	usbctl = spi_rd8(udc, MAX3420_REG_USBCTL);
+	usbctl &= ~SIGRWU;
+	spi_wr8(udc, MAX3420_REG_USBCTL, usbctl);
+
+	udc->suspended = false;
+
+	return true;
+}
+
+static void max3420_nuke(struct max3420_ep *ep, int status);
+static void __max3420_stop(struct max3420_udc *udc)
+{
+	u8 val;
+	int i;
+
+	/* clear all pending requests */
+	for (i = 1; i < MAX3420_MAX_EPS; i++)
+		max3420_nuke(&udc->ep[i], -ECONNRESET);
+
+	/* Disable IRQ to CPU */
+	spi_wr8(udc, MAX3420_REG_CPUCTL, 0);
+
+	val = spi_rd8(udc, MAX3420_REG_USBCTL);
+	val |= PWRDOWN;
+	if (udc->is_selfpowered)
+		val &= ~HOSCSTEN;
+	else
+		val |= HOSCSTEN;
+	spi_wr8(udc, MAX3420_REG_USBCTL, val);
+}
+
+static void __max3420_start(struct max3420_udc *udc)
+{
+	u8 val;
+
+	/* Need this delay if bus-powered,
+	 * but even for self-powered it helps stability
+	 */
+	msleep_interruptible(250);
+
+	/* configure SPI */
+	spi_wr8(udc, MAX3420_REG_PINCTL, FDUPSPI);
+
+	/* Chip Reset */
+	spi_wr8(udc, MAX3420_REG_USBCTL, CHIPRES);
+	msleep_interruptible(5);
+	spi_wr8(udc, MAX3420_REG_USBCTL, 0);
+
+	/* Poll for OSC to stabilize */
+	while (1) {
+		val = spi_rd8(udc, MAX3420_REG_USBIRQ);
+		if (val & OSCOKIRQ)
+			break;
+		cond_resched();
+	}
+
+	/* Enable PULL-UP only when Vbus detected */
+	val = spi_rd8(udc, MAX3420_REG_USBCTL);
+	val |= VBGATE | CONNECT;
+	spi_wr8(udc, MAX3420_REG_USBCTL, val);
+
+	val = URESDNIRQ | URESIRQ;
+	if (udc->is_selfpowered)
+		val |= NOVBUSIRQ;
+	spi_wr8(udc, MAX3420_REG_USBIEN, val);
+
+	/* Enable only EP0 interrupts */
+	val = IN0BAVIRQ | OUT0DAVIRQ | SUDAVIRQ;
+	spi_wr8(udc, MAX3420_REG_EPIEN, val);
+
+	/* Enable IRQ to CPU */
+	spi_wr8(udc, MAX3420_REG_CPUCTL, IE);
+}
+
+static int max3420_start(struct max3420_udc *udc)
+{
+	unsigned long flags;
+	int todo;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	todo = udc->todo & UDC_START;
+	udc->todo &= ~UDC_START;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (!todo)
+		return false;
+
+	if (udc->vbus_active && udc->softconnect)
+		__max3420_start(udc);
+	else
+		__max3420_stop(udc);
+
+	return true;
+}
+
+static irqreturn_t max3420_vbus_handler(int irq, void *dev_id)
+{
+	struct max3420_udc *udc = dev_id;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	/* its a vbus change interrupt */
+	udc->vbus_active = !udc->vbus_active;
+	udc->todo |= UDC_START;
+	usb_udc_vbus_handler(&udc->gadget, udc->vbus_active);
+	usb_gadget_set_state(&udc->gadget, udc->vbus_active
+			     ? USB_STATE_POWERED : USB_STATE_NOTATTACHED);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (udc->thread_task)
+		wake_up_process(udc->thread_task);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t max3420_irq_handler(int irq, void *dev_id)
+{
+	struct max3420_udc *udc = dev_id;
+	struct spi_device *spi = udc->spi;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if ((udc->todo & ENABLE_IRQ) == 0) {
+		disable_irq_nosync(spi->irq);
+		udc->todo |= ENABLE_IRQ;
+	}
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (udc->thread_task)
+		wake_up_process(udc->thread_task);
+
+	return IRQ_HANDLED;
+}
+
+static void max3420_getstatus(struct max3420_udc *udc)
+{
+	struct max3420_ep *ep;
+	u16 status = 0;
+
+	switch (udc->setup.bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		/* Get device status */
+		status = udc->gadget.is_selfpowered << USB_DEVICE_SELF_POWERED;
+		status |= (udc->remote_wkp << USB_DEVICE_REMOTE_WAKEUP);
+		break;
+	case USB_RECIP_INTERFACE:
+		if (udc->driver->setup(&udc->gadget, &udc->setup) < 0)
+			goto stall;
+		break;
+	case USB_RECIP_ENDPOINT:
+		ep = &udc->ep[udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK];
+		if (udc->setup.wIndex & USB_DIR_IN) {
+			if (!ep->ep_usb.caps.dir_in)
+				goto stall;
+		} else {
+			if (!ep->ep_usb.caps.dir_out)
+				goto stall;
+		}
+		if (ep->halted)
+			status = 1 << USB_ENDPOINT_HALT;
+		break;
+	default:
+		goto stall;
+	}
+
+	status = cpu_to_le16(status);
+	spi_wr_buf(udc, MAX3420_REG_EP0FIFO, &status, 2);
+	spi_wr8_ack(udc, MAX3420_REG_EP0BC, 2, 1);
+	return;
+stall:
+	dev_err(udc->dev, "Can't respond to getstatus request\n");
+	spi_wr8(udc, MAX3420_REG_EPSTALLS, STLEP0IN | STLEP0OUT | STLSTAT);
+}
+
+static void max3420_set_clear_feature(struct max3420_udc *udc)
+{
+	struct max3420_ep *ep;
+	int set = udc->setup.bRequest == USB_REQ_SET_FEATURE;
+	unsigned long flags;
+	int id;
+
+	switch (udc->setup.bRequestType) {
+	case USB_RECIP_DEVICE:
+		if (udc->setup.wValue != USB_DEVICE_REMOTE_WAKEUP)
+			break;
+
+		if (udc->setup.bRequest == USB_REQ_SET_FEATURE)
+			udc->remote_wkp = 1;
+		else
+			udc->remote_wkp = 0;
+
+		return spi_ack_ctrl(udc);
+
+	case USB_RECIP_ENDPOINT:
+		if (udc->setup.wValue != USB_ENDPOINT_HALT)
+			break;
+
+		id = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK;
+		ep = &udc->ep[id];
+
+		spin_lock_irqsave(&ep->lock, flags);
+		ep->todo &= ~STALL_EP;
+		if (set)
+			ep->todo |= STALL;
+		else
+			ep->todo |= UNSTALL;
+		spin_unlock_irqrestore(&ep->lock, flags);
+
+		spi_max3420_stall(ep);
+		return;
+	default:
+		break;
+	}
+
+	dev_err(udc->dev, "Can't respond to SET/CLEAR FEATURE\n");
+	spi_wr8(udc, MAX3420_REG_EPSTALLS, STLEP0IN | STLEP0OUT | STLSTAT);
+}
+
+static void max3420_handle_setup(struct max3420_udc *udc)
+{
+	struct usb_ctrlrequest setup;
+
+	spi_rd_buf(udc, MAX3420_REG_SUDFIFO, (void *)&setup, 8);
+
+	udc->setup = setup;
+	udc->setup.wValue = cpu_to_le16(setup.wValue);
+	udc->setup.wIndex = cpu_to_le16(setup.wIndex);
+	udc->setup.wLength = cpu_to_le16(setup.wLength);
+
+	switch (udc->setup.bRequest) {
+	case USB_REQ_GET_STATUS:
+		/* Data+Status phase form udc */
+		if ((udc->setup.bRequestType &
+				(USB_DIR_IN | USB_TYPE_MASK)) !=
+				(USB_DIR_IN | USB_TYPE_STANDARD)) {
+			break;
+		}
+		return max3420_getstatus(udc);
+	case USB_REQ_SET_ADDRESS:
+		/* Status phase from udc */
+		if (udc->setup.bRequestType != (USB_DIR_OUT |
+				USB_TYPE_STANDARD | USB_RECIP_DEVICE)) {
+			break;
+		}
+		spi_rd8_ack(udc, MAX3420_REG_FNADDR, 1);
+		dev_dbg(udc->dev, "Assigned Address=%d\n", udc->setup.wValue);
+		return;
+	case USB_REQ_CLEAR_FEATURE:
+	case USB_REQ_SET_FEATURE:
+		/* Requests with no data phase, status phase from udc */
+		if ((udc->setup.bRequestType & USB_TYPE_MASK)
+				!= USB_TYPE_STANDARD)
+			break;
+		return max3420_set_clear_feature(udc);
+	default:
+		break;
+	}
+
+	if (udc->driver->setup(&udc->gadget, &setup) < 0) {
+		/* Stall EP0 */
+		spi_wr8(udc, MAX3420_REG_EPSTALLS,
+			STLEP0IN | STLEP0OUT | STLSTAT);
+	}
+}
+
+static void max3420_req_done(struct max3420_req *req, int status)
+{
+	struct max3420_ep *ep = req->ep;
+	struct max3420_udc *udc = ep->udc;
+
+	if (req->usb_req.status == -EINPROGRESS)
+		req->usb_req.status = status;
+	else
+		status = req->usb_req.status;
+
+	if (status && status != -ESHUTDOWN)
+		dev_err(udc->dev, "%s done %p, status %d\n",
+			ep->ep_usb.name, req, status);
+
+	if (req->usb_req.complete)
+		req->usb_req.complete(&ep->ep_usb, &req->usb_req);
+}
+
+static int max3420_do_data(struct max3420_udc *udc, int ep_id, int in)
+{
+	struct max3420_ep *ep = &udc->ep[ep_id];
+	struct max3420_req *req;
+	int done, length, psz;
+	void *buf;
+
+	if (list_empty(&ep->queue))
+		return false;
+
+	req = list_first_entry(&ep->queue, struct max3420_req, queue);
+	buf = req->usb_req.buf + req->usb_req.actual;
+
+	psz = ep->ep_usb.maxpacket;
+	length = req->usb_req.length - req->usb_req.actual;
+	length = min(length, psz);
+
+	if (length == 0) {
+		done = 1;
+		goto xfer_done;
+	}
+
+	done = 0;
+	if (in) {
+		prefetch(buf);
+		spi_wr_buf(udc, MAX3420_REG_EP0FIFO + ep_id, buf, length);
+		spi_wr8(udc, MAX3420_REG_EP0BC + ep_id, length);
+		if (length < psz)
+			done = 1;
+	} else {
+		psz = spi_rd8(udc, MAX3420_REG_EP0BC + ep_id);
+		length = min(length, psz);
+		prefetchw(buf);
+		spi_rd_buf(udc, MAX3420_REG_EP0FIFO + ep_id, buf, length);
+		if (length < ep->ep_usb.maxpacket)
+			done = 1;
+	}
+
+	req->usb_req.actual += length;
+
+	if (req->usb_req.actual == req->usb_req.length)
+		done = 1;
+
+xfer_done:
+	if (done) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&ep->lock, flags);
+		list_del_init(&req->queue);
+		spin_unlock_irqrestore(&ep->lock, flags);
+
+		if (ep_id == 0)
+			spi_ack_ctrl(udc);
+
+		max3420_req_done(req, 0);
+	}
+
+	return true;
+}
+
+static int max3420_handle_irqs(struct max3420_udc *udc)
+{
+	u8 epien, epirq, usbirq, usbien, reg[4];
+	bool ret = false;
+
+	spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 4);
+	epirq = reg[0];
+	epien = reg[1];
+	usbirq = reg[2];
+	usbien = reg[3];
+
+	usbirq &= usbien;
+	epirq &= epien;
+
+	if (epirq & SUDAVIRQ) {
+		spi_wr8(udc, MAX3420_REG_EPIRQ, SUDAVIRQ);
+		max3420_handle_setup(udc);
+		return true;
+	}
+
+	if (usbirq & VBUSIRQ) {
+		spi_wr8(udc, MAX3420_REG_USBIRQ, VBUSIRQ);
+		dev_dbg(udc->dev, "Cable plugged in\n");
+		return true;
+	}
+
+	if (usbirq & NOVBUSIRQ) {
+		spi_wr8(udc, MAX3420_REG_USBIRQ, NOVBUSIRQ);
+		dev_dbg(udc->dev, "Cable pulled out\n");
+		return true;
+	}
+
+	if (usbirq & URESIRQ) {
+		spi_wr8(udc, MAX3420_REG_USBIRQ, URESIRQ);
+		dev_dbg(udc->dev, "USB Reset - Start\n");
+		return true;
+	}
+
+	if (usbirq & URESDNIRQ) {
+		spi_wr8(udc, MAX3420_REG_USBIRQ, URESDNIRQ);
+		dev_dbg(udc->dev, "USB Reset - END\n");
+		spi_wr8(udc, MAX3420_REG_USBIEN, URESDNIRQ | URESIRQ);
+		spi_wr8(udc, MAX3420_REG_EPIEN, SUDAVIRQ | IN0BAVIRQ
+			| OUT0DAVIRQ);
+		return true;
+	}
+
+	if (usbirq & SUSPIRQ) {
+		spi_wr8(udc, MAX3420_REG_USBIRQ, SUSPIRQ);
+		dev_dbg(udc->dev, "USB Suspend - Enter\n");
+		udc->suspended = true;
+		return true;
+	}
+
+	if (usbirq & BUSACTIRQ) {
+		spi_wr8(udc, MAX3420_REG_USBIRQ, BUSACTIRQ);
+		dev_dbg(udc->dev, "USB Suspend - Exit\n");
+		udc->suspended = false;
+		return true;
+	}
+
+	if (usbirq & RWUDNIRQ) {
+		spi_wr8(udc, MAX3420_REG_USBIRQ, RWUDNIRQ);
+		dev_dbg(udc->dev, "Asked Host to wakeup\n");
+		return true;
+	}
+
+	if (usbirq & OSCOKIRQ) {
+		spi_wr8(udc, MAX3420_REG_USBIRQ, OSCOKIRQ);
+		dev_dbg(udc->dev, "Osc stabilized, start work\n");
+		return true;
+	}
+
+	if (epirq & OUT0DAVIRQ && max3420_do_data(udc, 0, 0)) {
+		spi_wr8_ack(udc, MAX3420_REG_EPIRQ, OUT0DAVIRQ, 1);
+		ret = true;
+	}
+
+	if (epirq & IN0BAVIRQ && max3420_do_data(udc, 0, 1))
+		ret = true;
+
+	if (epirq & OUT1DAVIRQ && max3420_do_data(udc, 1, 0)) {
+		spi_wr8_ack(udc, MAX3420_REG_EPIRQ, OUT1DAVIRQ, 1);
+		ret = true;
+	}
+
+	if (epirq & IN2BAVIRQ && max3420_do_data(udc, 2, 1))
+		ret = true;
+
+	if (epirq & IN3BAVIRQ && max3420_do_data(udc, 3, 1))
+		ret = true;
+
+	return ret;
+}
+
+static int max3420_thread(void *dev_id)
+{
+	struct max3420_udc *udc = dev_id;
+	struct spi_device *spi = udc->spi;
+	int i, loop_again = 1;
+	unsigned long flags;
+
+	while (!kthread_should_stop()) {
+		if (!loop_again) {
+			ktime_t kt = ns_to_ktime(1000 * 1000 * 250); /* 250ms */
+
+			set_current_state(TASK_INTERRUPTIBLE);
+
+			spin_lock_irqsave(&udc->lock, flags);
+			if (udc->todo & ENABLE_IRQ) {
+				enable_irq(spi->irq);
+				udc->todo &= ~ENABLE_IRQ;
+			}
+			spin_unlock_irqrestore(&udc->lock, flags);
+
+			schedule_hrtimeout(&kt, HRTIMER_MODE_REL);
+		}
+		loop_again = 0;
+
+		mutex_lock(&udc->spi_bus_mutex);
+
+		/* If bus-vbus_active and disconnected */
+		if (!udc->vbus_active || !udc->softconnect)
+			goto loop;
+
+		if (max3420_start(udc)) {
+			loop_again = 1;
+			goto loop;
+		}
+
+		if (max3420_handle_irqs(udc)) {
+			loop_again = 1;
+			goto loop;
+		}
+
+		if (spi_max3420_rwkup(udc)) {
+			loop_again = 1;
+			goto loop;
+		}
+
+		max3420_do_data(udc, 0, 1); /* get done with the EP0 ZLP */
+
+		for (i = 1; i < MAX3420_MAX_EPS; i++) {
+			struct max3420_ep *ep = &udc->ep[i];
+
+			if (spi_max3420_enable(ep))
+				loop_again = 1;
+			if (spi_max3420_stall(ep))
+				loop_again = 1;
+		}
+loop:
+		mutex_unlock(&udc->spi_bus_mutex);
+	}
+
+	set_current_state(TASK_RUNNING);
+	dev_info(udc->dev, "SPI thread exiting\n");
+	return 0;
+}
+
+static int max3420_ep_set_halt(struct usb_ep *_ep, int stall)
+{
+	struct max3420_ep *ep = to_max3420_ep(_ep);
+	struct max3420_udc *udc = ep->udc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+
+	ep->todo &= ~STALL_EP;
+	if (stall)
+		ep->todo |= STALL;
+	else
+		ep->todo |= UNSTALL;
+
+	spin_unlock_irqrestore(&ep->lock, flags);
+
+	wake_up_process(udc->thread_task);
+
+	dev_dbg(udc->dev, "%sStall %s\n", stall ? "" : "Un", ep->name);
+	return 0;
+}
+
+static int __max3420_ep_enable(struct max3420_ep *ep,
+			       const struct usb_endpoint_descriptor *desc)
+{
+	unsigned int maxp = usb_endpoint_maxp(desc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+	ep->ep_usb.desc = desc;
+	ep->ep_usb.maxpacket = maxp;
+
+	ep->todo &= ~ENABLE_EP;
+	ep->todo |= ENABLE;
+	spin_unlock_irqrestore(&ep->lock, flags);
+
+	return 0;
+}
+
+static int max3420_ep_enable(struct usb_ep *_ep,
+			     const struct usb_endpoint_descriptor *desc)
+{
+	struct max3420_ep *ep = to_max3420_ep(_ep);
+	struct max3420_udc *udc = ep->udc;
+
+	__max3420_ep_enable(ep, desc);
+
+	wake_up_process(udc->thread_task);
+
+	return 0;
+}
+
+static void max3420_nuke(struct max3420_ep *ep, int status)
+{
+	struct max3420_req *req, *r;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+
+	list_for_each_entry_safe(req, r, &ep->queue, queue) {
+		list_del_init(&req->queue);
+
+		spin_unlock_irqrestore(&ep->lock, flags);
+		max3420_req_done(req, status);
+		spin_lock_irqsave(&ep->lock, flags);
+	}
+
+	spin_unlock_irqrestore(&ep->lock, flags);
+}
+
+static void __max3420_ep_disable(struct max3420_ep *ep)
+{
+	struct max3420_udc *udc = ep->udc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+
+	ep->ep_usb.desc = NULL;
+
+	ep->todo &= ~ENABLE_EP;
+	ep->todo |= DISABLE;
+
+	spin_unlock_irqrestore(&ep->lock, flags);
+
+	dev_dbg(udc->dev, "Disabled %s\n", ep->name);
+}
+
+static int max3420_ep_disable(struct usb_ep *_ep)
+{
+	struct max3420_ep *ep = to_max3420_ep(_ep);
+	struct max3420_udc *udc = ep->udc;
+
+	max3420_nuke(ep, -ESHUTDOWN);
+
+	__max3420_ep_disable(ep);
+
+	wake_up_process(udc->thread_task);
+
+	return 0;
+}
+
+static struct usb_request *max3420_alloc_request(struct usb_ep *_ep,
+						 gfp_t gfp_flags)
+{
+	struct max3420_ep *ep = to_max3420_ep(_ep);
+	struct max3420_req *req;
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	req->ep = ep;
+
+	return &req->usb_req;
+}
+
+static void max3420_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	kfree(to_max3420_req(_req));
+}
+
+static int max3420_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+			    gfp_t ignored)
+{
+	struct max3420_req *req = to_max3420_req(_req);
+	struct max3420_ep *ep  = to_max3420_ep(_ep);
+	struct max3420_udc *udc = ep->udc;
+	unsigned long flags;
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	spin_lock_irqsave(&ep->lock, flags);
+	list_add_tail(&req->queue, &ep->queue);
+	spin_unlock_irqrestore(&ep->lock, flags);
+
+	wake_up_process(udc->thread_task);
+	return 0;
+}
+
+static int max3420_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct max3420_req *t = NULL;
+	struct max3420_req *req = to_max3420_req(_req);
+	struct max3420_req *iter;
+	struct max3420_ep *ep = to_max3420_ep(_ep);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+
+	/* Pluck the descriptor from queue */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (iter != req)
+			continue;
+		list_del_init(&req->queue);
+		t = iter;
+		break;
+	}
+
+	spin_unlock_irqrestore(&ep->lock, flags);
+
+	if (t)
+		max3420_req_done(req, -ECONNRESET);
+
+	return 0;
+}
+
+static const struct usb_ep_ops max3420_ep_ops = {
+	.enable		= max3420_ep_enable,
+	.disable	= max3420_ep_disable,
+	.alloc_request	= max3420_alloc_request,
+	.free_request	= max3420_free_request,
+	.queue		= max3420_ep_queue,
+	.dequeue	= max3420_ep_dequeue,
+	.set_halt	= max3420_ep_set_halt,
+};
+
+static int max3420_wakeup(struct usb_gadget *gadget)
+{
+	struct max3420_udc *udc = to_udc(gadget);
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* Only if wakeup allowed by host */
+	if (udc->remote_wkp) {
+		udc->todo |= REMOTE_WAKEUP;
+		ret = 0;
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (udc->thread_task)
+		wake_up_process(udc->thread_task);
+	return ret;
+}
+
+static int max3420_udc_start(struct usb_gadget *gadget,
+			     struct usb_gadget_driver *driver)
+{
+	struct max3420_udc *udc = to_udc(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	/* hook up the driver */
+	udc->driver = driver;
+	udc->gadget.speed = USB_SPEED_FULL;
+
+	udc->gadget.is_selfpowered = udc->is_selfpowered;
+	udc->remote_wkp = 0;
+	udc->softconnect = true;
+	udc->todo |= UDC_START;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (udc->thread_task)
+		wake_up_process(udc->thread_task);
+
+	return 0;
+}
+
+static int max3420_udc_stop(struct usb_gadget *gadget)
+{
+	struct max3420_udc *udc = to_udc(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->is_selfpowered = udc->gadget.is_selfpowered;
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->driver = NULL;
+	udc->softconnect = false;
+	udc->todo |= UDC_START;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (udc->thread_task)
+		wake_up_process(udc->thread_task);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops max3420_udc_ops = {
+	.udc_start	= max3420_udc_start,
+	.udc_stop	= max3420_udc_stop,
+	.wakeup		= max3420_wakeup,
+};
+
+static void max3420_eps_init(struct max3420_udc *udc)
+{
+	int idx;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+
+	for (idx = 0; idx < MAX3420_MAX_EPS; idx++) {
+		struct max3420_ep *ep = &udc->ep[idx];
+
+		spin_lock_init(&ep->lock);
+		INIT_LIST_HEAD(&ep->queue);
+
+		ep->udc = udc;
+		ep->id = idx;
+		ep->halted = 0;
+		ep->maxpacket = 0;
+		ep->ep_usb.name = ep->name;
+		ep->ep_usb.ops = &max3420_ep_ops;
+		usb_ep_set_maxpacket_limit(&ep->ep_usb, MAX3420_EP_MAX_PACKET);
+
+		if (idx == 0) { /* For EP0 */
+			ep->ep_usb.desc = &ep0_desc;
+			ep->ep_usb.maxpacket = usb_endpoint_maxp(&ep0_desc);
+			ep->ep_usb.caps.type_control = true;
+			ep->ep_usb.caps.dir_in = true;
+			ep->ep_usb.caps.dir_out = true;
+			snprintf(ep->name, MAX3420_EPNAME_SIZE, "ep0");
+			continue;
+		}
+
+		if (idx == 1) { /* EP1 is OUT */
+			ep->ep_usb.caps.dir_in = false;
+			ep->ep_usb.caps.dir_out = true;
+			snprintf(ep->name, MAX3420_EPNAME_SIZE, "ep1-bulk-out");
+		} else { /* EP2 & EP3 are IN */
+			ep->ep_usb.caps.dir_in = true;
+			ep->ep_usb.caps.dir_out = false;
+			snprintf(ep->name, MAX3420_EPNAME_SIZE,
+				 "ep%d-bulk-in", idx);
+		}
+		ep->ep_usb.caps.type_iso = false;
+		ep->ep_usb.caps.type_int = false;
+		ep->ep_usb.caps.type_bulk = true;
+
+		list_add_tail(&ep->ep_usb.ep_list,
+			      &udc->gadget.ep_list);
+	}
+}
+
+static int max3420_probe(struct spi_device *spi)
+{
+	struct max3420_udc *udc;
+	int err, irq;
+	u8 reg[8];
+
+	if (spi->master->flags & SPI_MASTER_HALF_DUPLEX) {
+		dev_err(&spi->dev, "UDC needs full duplex to work\n");
+		return -EINVAL;
+	}
+
+	spi->mode = SPI_MODE_3;
+	spi->bits_per_word = 8;
+
+	err = spi_setup(spi);
+	if (err) {
+		dev_err(&spi->dev, "Unable to setup SPI bus\n");
+		return -EFAULT;
+	}
+
+	udc = devm_kzalloc(&spi->dev, sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
+
+	udc->spi = spi;
+
+	udc->remote_wkp = 0;
+
+	/* Setup gadget structure */
+	udc->gadget.ops = &max3420_udc_ops;
+	udc->gadget.max_speed = USB_SPEED_FULL;
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->gadget.ep0 = &udc->ep[0].ep_usb;
+	udc->gadget.name = driver_name;
+
+	spin_lock_init(&udc->lock);
+	mutex_init(&udc->spi_bus_mutex);
+
+	udc->ep0req.ep = &udc->ep[0];
+	udc->ep0req.usb_req.buf = udc->ep0buf;
+	INIT_LIST_HEAD(&udc->ep0req.queue);
+
+	/* setup Endpoints */
+	max3420_eps_init(udc);
+
+	/* configure SPI */
+	spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 8);
+	spi_wr8(udc, MAX3420_REG_PINCTL, FDUPSPI);
+
+	err = usb_add_gadget_udc(&spi->dev, &udc->gadget);
+	if (err)
+		return err;
+
+	udc->dev = &udc->gadget.dev;
+
+	spi_set_drvdata(spi, udc);
+
+	irq = of_irq_get_byname(spi->dev.of_node, "udc");
+	err = devm_request_irq(&spi->dev, irq, max3420_irq_handler, 0,
+			       "max3420", udc);
+	if (err < 0)
+		goto del_gadget;
+
+	udc->thread_task = kthread_create(max3420_thread, udc,
+					  "max3420-thread");
+	if (IS_ERR(udc->thread_task)) {
+		err = PTR_ERR(udc->thread_task);
+		goto del_gadget;
+	}
+
+	irq = of_irq_get_byname(spi->dev.of_node, "vbus");
+	if (irq <= 0) { /* no vbus irq implies self-powered design */
+		udc->is_selfpowered = 1;
+		udc->vbus_active = true;
+		udc->todo |= UDC_START;
+		usb_udc_vbus_handler(&udc->gadget, udc->vbus_active);
+		usb_gadget_set_state(&udc->gadget, USB_STATE_POWERED);
+		max3420_start(udc);
+	} else {
+		udc->is_selfpowered = 0;
+		/* Detect current vbus status */
+		spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 8);
+		if (reg[7] != 0xff)
+			udc->vbus_active = true;
+
+		err = devm_request_irq(&spi->dev, irq,
+				       max3420_vbus_handler, 0, "vbus", udc);
+		if (err < 0)
+			goto del_gadget;
+	}
+
+	return 0;
+
+del_gadget:
+	usb_del_gadget_udc(&udc->gadget);
+	return err;
+}
+
+static void max3420_remove(struct spi_device *spi)
+{
+	struct max3420_udc *udc = spi_get_drvdata(spi);
+	unsigned long flags;
+
+	usb_del_gadget_udc(&udc->gadget);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	kthread_stop(udc->thread_task);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+static const struct of_device_id max3420_udc_of_match[] = {
+	{ .compatible = "maxim,max3420-udc"},
+	{ .compatible = "maxim,max3421-udc"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, max3420_udc_of_match);
+
+static struct spi_driver max3420_driver = {
+	.driver = {
+		.name = "max3420-udc",
+		.of_match_table = of_match_ptr(max3420_udc_of_match),
+	},
+	.probe = max3420_probe,
+	.remove = max3420_remove,
+};
+
+module_spi_driver(max3420_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Jassi Brar <jaswinder.singh@linaro.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/udc/mv_u3d.h b/drivers/usb/gadget/udc/mv_u3d.h
new file mode 100644
index 000000000..66b84f792
--- /dev/null
+++ b/drivers/usb/gadget/udc/mv_u3d.h
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ */
+
+#ifndef __MV_U3D_H
+#define __MV_U3D_H
+
+#define MV_U3D_EP_CONTEXT_ALIGNMENT	32
+#define MV_U3D_TRB_ALIGNMENT	16
+#define MV_U3D_DMA_BOUNDARY	4096
+#define MV_U3D_EP0_MAX_PKT_SIZE	512
+
+/* ep0 transfer state */
+#define MV_U3D_WAIT_FOR_SETUP		0
+#define MV_U3D_DATA_STATE_XMIT		1
+#define MV_U3D_DATA_STATE_NEED_ZLP	2
+#define MV_U3D_WAIT_FOR_OUT_STATUS	3
+#define MV_U3D_DATA_STATE_RECV		4
+#define MV_U3D_STATUS_STAGE		5
+
+#define MV_U3D_EP_MAX_LENGTH_TRANSFER	0x10000
+
+/* USB3 Interrupt Status */
+#define MV_U3D_USBINT_SETUP		0x00000001
+#define MV_U3D_USBINT_RX_COMPLETE	0x00000002
+#define MV_U3D_USBINT_TX_COMPLETE	0x00000004
+#define MV_U3D_USBINT_UNDER_RUN	0x00000008
+#define MV_U3D_USBINT_RXDESC_ERR	0x00000010
+#define MV_U3D_USBINT_TXDESC_ERR	0x00000020
+#define MV_U3D_USBINT_RX_TRB_COMPLETE	0x00000040
+#define MV_U3D_USBINT_TX_TRB_COMPLETE	0x00000080
+#define MV_U3D_USBINT_VBUS_VALID	0x00010000
+#define MV_U3D_USBINT_STORAGE_CMD_FULL	0x00020000
+#define MV_U3D_USBINT_LINK_CHG		0x01000000
+
+/* USB3 Interrupt Enable */
+#define MV_U3D_INTR_ENABLE_SETUP		0x00000001
+#define MV_U3D_INTR_ENABLE_RX_COMPLETE		0x00000002
+#define MV_U3D_INTR_ENABLE_TX_COMPLETE		0x00000004
+#define MV_U3D_INTR_ENABLE_UNDER_RUN		0x00000008
+#define MV_U3D_INTR_ENABLE_RXDESC_ERR		0x00000010
+#define MV_U3D_INTR_ENABLE_TXDESC_ERR		0x00000020
+#define MV_U3D_INTR_ENABLE_RX_TRB_COMPLETE	0x00000040
+#define MV_U3D_INTR_ENABLE_TX_TRB_COMPLETE	0x00000080
+#define MV_U3D_INTR_ENABLE_RX_BUFFER_ERR	0x00000100
+#define MV_U3D_INTR_ENABLE_VBUS_VALID		0x00010000
+#define MV_U3D_INTR_ENABLE_STORAGE_CMD_FULL	0x00020000
+#define MV_U3D_INTR_ENABLE_LINK_CHG		0x01000000
+#define MV_U3D_INTR_ENABLE_PRIME_STATUS	0x02000000
+
+/* USB3 Link Change */
+#define MV_U3D_LINK_CHANGE_LINK_UP		0x00000001
+#define MV_U3D_LINK_CHANGE_SUSPEND		0x00000002
+#define MV_U3D_LINK_CHANGE_RESUME		0x00000004
+#define MV_U3D_LINK_CHANGE_WRESET		0x00000008
+#define MV_U3D_LINK_CHANGE_HRESET		0x00000010
+#define MV_U3D_LINK_CHANGE_VBUS_INVALID	0x00000020
+#define MV_U3D_LINK_CHANGE_INACT		0x00000040
+#define MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0	0x00000080
+#define MV_U3D_LINK_CHANGE_U1			0x00000100
+#define MV_U3D_LINK_CHANGE_U2			0x00000200
+#define MV_U3D_LINK_CHANGE_U3			0x00000400
+
+/* bridge setting */
+#define MV_U3D_BRIDGE_SETTING_VBUS_VALID	(1 << 16)
+
+/* Command Register Bit Masks */
+#define MV_U3D_CMD_RUN_STOP		0x00000001
+#define MV_U3D_CMD_CTRL_RESET		0x00000002
+
+/* ep control register */
+#define MV_U3D_EPXCR_EP_TYPE_CONTROL		0
+#define MV_U3D_EPXCR_EP_TYPE_ISOC		1
+#define MV_U3D_EPXCR_EP_TYPE_BULK		2
+#define MV_U3D_EPXCR_EP_TYPE_INT		3
+#define MV_U3D_EPXCR_EP_ENABLE_SHIFT		4
+#define MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT	12
+#define MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT	16
+#define MV_U3D_USB_BULK_BURST_OUT		6
+#define MV_U3D_USB_BULK_BURST_IN		14
+
+#define MV_U3D_EPXCR_EP_FLUSH		(1 << 7)
+#define MV_U3D_EPXCR_EP_HALT		(1 << 1)
+#define MV_U3D_EPXCR_EP_INIT		(1)
+
+/* TX/RX Status Register */
+#define MV_U3D_XFERSTATUS_COMPLETE_SHIFT	24
+#define MV_U3D_COMPLETE_INVALID	0
+#define MV_U3D_COMPLETE_SUCCESS	1
+#define MV_U3D_COMPLETE_BUFF_ERR	2
+#define MV_U3D_COMPLETE_SHORT_PACKET	3
+#define MV_U3D_COMPLETE_TRB_ERR	5
+#define MV_U3D_XFERSTATUS_TRB_LENGTH_MASK	(0xFFFFFF)
+
+#define MV_U3D_USB_LINK_BYPASS_VBUS	0x8
+
+#define MV_U3D_LTSSM_PHY_INIT_DONE		0x80000000
+#define MV_U3D_LTSSM_NEVER_GO_COMPLIANCE	0x40000000
+
+#define MV_U3D_USB3_OP_REGS_OFFSET	0x100
+#define MV_U3D_USB3_PHY_OFFSET		0xB800
+
+#define DCS_ENABLE	0x1
+
+/* timeout */
+#define MV_U3D_RESET_TIMEOUT		10000
+#define MV_U3D_FLUSH_TIMEOUT		100000
+#define MV_U3D_OWN_TIMEOUT		10000
+#define LOOPS_USEC_SHIFT	4
+#define LOOPS_USEC		(1 << LOOPS_USEC_SHIFT)
+#define LOOPS(timeout)		((timeout) >> LOOPS_USEC_SHIFT)
+
+/* ep direction */
+#define MV_U3D_EP_DIR_IN		1
+#define MV_U3D_EP_DIR_OUT		0
+#define mv_u3d_ep_dir(ep)	(((ep)->ep_num == 0) ? \
+				((ep)->u3d->ep0_dir) : ((ep)->direction))
+
+/* usb capability registers */
+struct mv_u3d_cap_regs {
+	u32	rsvd[5];
+	u32	dboff;	/* doorbell register offset */
+	u32	rtsoff;	/* runtime register offset */
+	u32	vuoff;	/* vendor unique register offset */
+};
+
+/* operation registers */
+struct mv_u3d_op_regs {
+	u32	usbcmd;		/* Command register */
+	u32	rsvd1[11];
+	u32	dcbaapl;	/* Device Context Base Address low register */
+	u32	dcbaaph;	/* Device Context Base Address high register */
+	u32	rsvd2[243];
+	u32	portsc;		/* port status and control register*/
+	u32	portlinkinfo;	/* port link info register*/
+	u32	rsvd3[9917];
+	u32	doorbell;	/* doorbell register */
+};
+
+/* control endpoint enable registers */
+struct epxcr {
+	u32	epxoutcr0;	/* ep out control 0 register */
+	u32	epxoutcr1;	/* ep out control 1 register */
+	u32	epxincr0;	/* ep in control 0 register */
+	u32	epxincr1;	/* ep in control 1 register */
+};
+
+/* transfer status registers */
+struct xferstatus {
+	u32	curdeqlo;	/* current TRB pointer low */
+	u32	curdeqhi;	/* current TRB pointer high */
+	u32	statuslo;	/* transfer status low */
+	u32	statushi;	/* transfer status high */
+};
+
+/* vendor unique control registers */
+struct mv_u3d_vuc_regs {
+	u32	ctrlepenable;	/* control endpoint enable register */
+	u32	setuplock;	/* setup lock register */
+	u32	endcomplete;	/* endpoint transfer complete register */
+	u32	intrcause;	/* interrupt cause register */
+	u32	intrenable;	/* interrupt enable register */
+	u32	trbcomplete;	/* TRB complete register */
+	u32	linkchange;	/* link change register */
+	u32	rsvd1[5];
+	u32	trbunderrun;	/* TRB underrun register */
+	u32	rsvd2[43];
+	u32	bridgesetting;	/* bridge setting register */
+	u32	rsvd3[7];
+	struct xferstatus	txst[16];	/* TX status register */
+	struct xferstatus	rxst[16];	/* RX status register */
+	u32	ltssm;		/* LTSSM control register */
+	u32	pipe;		/* PIPE control register */
+	u32	linkcr0;	/* link control 0 register */
+	u32	linkcr1;	/* link control 1 register */
+	u32	rsvd6[60];
+	u32	mib0;		/* MIB0 counter register */
+	u32	usblink;	/* usb link control register */
+	u32	ltssmstate;	/* LTSSM state register */
+	u32	linkerrorcause;	/* link error cause register */
+	u32	rsvd7[60];
+	u32	devaddrtiebrkr;	/* device address and tie breaker */
+	u32	itpinfo0;	/* ITP info 0 register */
+	u32	itpinfo1;	/* ITP info 1 register */
+	u32	rsvd8[61];
+	struct epxcr	epcr[16];	/* ep control register */
+	u32	rsvd9[64];
+	u32	phyaddr;	/* PHY address register */
+	u32	phydata;	/* PHY data register */
+};
+
+/* Endpoint context structure */
+struct mv_u3d_ep_context {
+	u32	rsvd0;
+	u32	rsvd1;
+	u32	trb_addr_lo;		/* TRB address low 32 bit */
+	u32	trb_addr_hi;		/* TRB address high 32 bit */
+	u32	rsvd2;
+	u32	rsvd3;
+	struct usb_ctrlrequest setup_buffer;	/* setup data buffer */
+};
+
+/* TRB control data structure */
+struct mv_u3d_trb_ctrl {
+	u32	own:1;		/* owner of TRB */
+	u32	rsvd1:3;
+	u32	chain:1;	/* associate this TRB with the
+				next TRB on the Ring */
+	u32	ioc:1;		/* interrupt on complete */
+	u32	rsvd2:4;
+	u32	type:6;		/* TRB type */
+#define TYPE_NORMAL	1
+#define TYPE_DATA	3
+#define TYPE_LINK	6
+	u32	dir:1;		/* Working at data stage of control endpoint
+				operation. 0 is OUT and 1 is IN. */
+	u32	rsvd3:15;
+};
+
+/* TRB data structure
+ * For multiple TRB, all the TRBs' physical address should be continuous.
+ */
+struct mv_u3d_trb_hw {
+	u32	buf_addr_lo;	/* data buffer address low 32 bit */
+	u32	buf_addr_hi;	/* data buffer address high 32 bit */
+	u32	trb_len;	/* transfer length */
+	struct mv_u3d_trb_ctrl	ctrl;	/* TRB control data */
+};
+
+/* TRB structure */
+struct mv_u3d_trb {
+	struct mv_u3d_trb_hw *trb_hw;	/* point to the trb_hw structure */
+	dma_addr_t trb_dma;		/* dma address for this trb_hw */
+	struct list_head trb_list;	/* trb list */
+};
+
+/* device data structure */
+struct mv_u3d {
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	spinlock_t			lock;	/* device lock */
+	struct completion		*done;
+	struct device			*dev;
+	int				irq;
+
+	/* usb controller registers */
+	struct mv_u3d_cap_regs __iomem	*cap_regs;
+	struct mv_u3d_op_regs __iomem	*op_regs;
+	struct mv_u3d_vuc_regs __iomem	*vuc_regs;
+	void __iomem			*phy_regs;
+
+	unsigned int			max_eps;
+	struct mv_u3d_ep_context	*ep_context;
+	size_t				ep_context_size;
+	dma_addr_t			ep_context_dma;
+
+	struct dma_pool			*trb_pool; /* for TRB data structure */
+	struct mv_u3d_ep		*eps;
+
+	struct mv_u3d_req		*status_req; /* ep0 status request */
+	struct usb_ctrlrequest		local_setup_buff; /* store setup data*/
+
+	unsigned int		resume_state;	/* USB state to resume */
+	unsigned int		usb_state;	/* USB current state */
+	unsigned int		ep0_state;	/* Endpoint zero state */
+	unsigned int		ep0_dir;
+
+	unsigned int		dev_addr;	/* device address */
+
+	unsigned int		errors;
+
+	unsigned		softconnect:1;
+	unsigned		vbus_active:1;	/* vbus is active or not */
+	unsigned		remote_wakeup:1; /* support remote wakeup */
+	unsigned		clock_gating:1;	/* clock gating or not */
+	unsigned		active:1;	/* udc is active or not */
+	unsigned		vbus_valid_detect:1; /* udc vbus detection */
+
+	struct mv_usb_addon_irq *vbus;
+	unsigned int		power;
+
+	struct clk		*clk;
+};
+
+/* endpoint data structure */
+struct mv_u3d_ep {
+	struct usb_ep		ep;
+	struct mv_u3d		*u3d;
+	struct list_head	queue;	/* ep request queued hardware */
+	struct list_head	req_list; /* list of ep request */
+	struct mv_u3d_ep_context	*ep_context; /* ep context */
+	u32			direction;
+	char			name[14];
+	u32			processing; /* there is ep request
+						queued on haredware */
+	spinlock_t		req_lock; /* ep lock */
+	unsigned		wedge:1;
+	unsigned		enabled:1;
+	unsigned		ep_type:2;
+	unsigned		ep_num:8;
+};
+
+/* request data structure */
+struct mv_u3d_req {
+	struct usb_request	req;
+	struct mv_u3d_ep	*ep;
+	struct list_head	queue;	/* ep requst queued on hardware */
+	struct list_head	list;	/* ep request list */
+	struct list_head	trb_list; /* trb list of a request */
+
+	struct mv_u3d_trb	*trb_head; /* point to first trb of a request */
+	unsigned		trb_count; /* TRB number in the chain */
+	unsigned		chain;	   /* TRB chain or not */
+};
+
+#endif
diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c
new file mode 100644
index 000000000..411b61797
--- /dev/null
+++ b/drivers/usb/gadget/udc/mv_u3d_core.c
@@ -0,0 +1,2064 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/notifier.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/mv_usb.h>
+#include <linux/clk.h>
+
+#include "mv_u3d.h"
+
+#define DRIVER_DESC		"Marvell PXA USB3.0 Device Controller driver"
+
+static const char driver_name[] = "mv_u3d";
+
+static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status);
+static void mv_u3d_stop_activity(struct mv_u3d *u3d,
+			struct usb_gadget_driver *driver);
+
+/* for endpoint 0 operations */
+static const struct usb_endpoint_descriptor mv_u3d_ep0_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	0,
+	.bmAttributes =		USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize =	MV_U3D_EP0_MAX_PKT_SIZE,
+};
+
+static void mv_u3d_ep0_reset(struct mv_u3d *u3d)
+{
+	struct mv_u3d_ep *ep;
+	u32 epxcr;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		ep = &u3d->eps[i];
+		ep->u3d = u3d;
+
+		/* ep0 ep context, ep0 in and out share the same ep context */
+		ep->ep_context = &u3d->ep_context[1];
+	}
+
+	/* reset ep state machine */
+	/* reset ep0 out */
+	epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
+	epxcr |= MV_U3D_EPXCR_EP_INIT;
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0);
+	udelay(5);
+	epxcr &= ~MV_U3D_EPXCR_EP_INIT;
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0);
+
+	epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE
+		<< MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
+		| (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
+		| (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		| MV_U3D_EPXCR_EP_TYPE_CONTROL);
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr1);
+
+	/* reset ep0 in */
+	epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
+	epxcr |= MV_U3D_EPXCR_EP_INIT;
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0);
+	udelay(5);
+	epxcr &= ~MV_U3D_EPXCR_EP_INIT;
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0);
+
+	epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE
+		<< MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
+		| (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
+		| (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		| MV_U3D_EPXCR_EP_TYPE_CONTROL);
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr1);
+}
+
+static void mv_u3d_ep0_stall(struct mv_u3d *u3d)
+{
+	u32 tmp;
+	dev_dbg(u3d->dev, "%s\n", __func__);
+
+	/* set TX and RX to stall */
+	tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
+	tmp |= MV_U3D_EPXCR_EP_HALT;
+	iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
+
+	tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
+	tmp |= MV_U3D_EPXCR_EP_HALT;
+	iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
+
+	/* update ep0 state */
+	u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
+	u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
+}
+
+static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index,
+	struct mv_u3d_req *curr_req)
+{
+	struct mv_u3d_trb	*curr_trb;
+	int actual, remaining_length = 0;
+	int direction, ep_num;
+	int retval = 0;
+	u32 tmp, status, length;
+
+	direction = index % 2;
+	ep_num = index / 2;
+
+	actual = curr_req->req.length;
+
+	while (!list_empty(&curr_req->trb_list)) {
+		curr_trb = list_entry(curr_req->trb_list.next,
+					struct mv_u3d_trb, trb_list);
+		if (!curr_trb->trb_hw->ctrl.own) {
+			dev_err(u3d->dev, "%s, TRB own error!\n",
+				u3d->eps[index].name);
+			return 1;
+		}
+
+		curr_trb->trb_hw->ctrl.own = 0;
+		if (direction == MV_U3D_EP_DIR_OUT)
+			tmp = ioread32(&u3d->vuc_regs->rxst[ep_num].statuslo);
+		else
+			tmp = ioread32(&u3d->vuc_regs->txst[ep_num].statuslo);
+
+		status = tmp >> MV_U3D_XFERSTATUS_COMPLETE_SHIFT;
+		length = tmp & MV_U3D_XFERSTATUS_TRB_LENGTH_MASK;
+
+		if (status == MV_U3D_COMPLETE_SUCCESS ||
+			(status == MV_U3D_COMPLETE_SHORT_PACKET &&
+			direction == MV_U3D_EP_DIR_OUT)) {
+			remaining_length += length;
+			actual -= remaining_length;
+		} else {
+			dev_err(u3d->dev,
+				"complete_tr error: ep=%d %s: error = 0x%x\n",
+				index >> 1, direction ? "SEND" : "RECV",
+				status);
+			retval = -EPROTO;
+		}
+
+		list_del_init(&curr_trb->trb_list);
+	}
+	if (retval)
+		return retval;
+
+	curr_req->req.actual = actual;
+	return 0;
+}
+
+/*
+ * mv_u3d_done() - retire a request; caller blocked irqs
+ * @status : request status to be set, only works when
+ * request is still in progress.
+ */
+static
+void mv_u3d_done(struct mv_u3d_ep *ep, struct mv_u3d_req *req, int status)
+	__releases(&ep->udc->lock)
+	__acquires(&ep->udc->lock)
+{
+	struct mv_u3d *u3d = (struct mv_u3d *)ep->u3d;
+
+	dev_dbg(u3d->dev, "mv_u3d_done: remove req->queue\n");
+	/* Removed the req from ep queue */
+	list_del_init(&req->queue);
+
+	/* req.status should be set as -EINPROGRESS in ep_queue() */
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	/* Free trb for the request */
+	if (!req->chain)
+		dma_pool_free(u3d->trb_pool,
+			req->trb_head->trb_hw, req->trb_head->trb_dma);
+	else {
+		dma_unmap_single(ep->u3d->gadget.dev.parent,
+			(dma_addr_t)req->trb_head->trb_dma,
+			req->trb_count * sizeof(struct mv_u3d_trb_hw),
+			DMA_BIDIRECTIONAL);
+		kfree(req->trb_head->trb_hw);
+	}
+	kfree(req->trb_head);
+
+	usb_gadget_unmap_request(&u3d->gadget, &req->req, mv_u3d_ep_dir(ep));
+
+	if (status && (status != -ESHUTDOWN)) {
+		dev_dbg(u3d->dev, "complete %s req %p stat %d len %u/%u",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length);
+	}
+
+	spin_unlock(&ep->u3d->lock);
+
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+
+	spin_lock(&ep->u3d->lock);
+}
+
+static int mv_u3d_queue_trb(struct mv_u3d_ep *ep, struct mv_u3d_req *req)
+{
+	u32 tmp, direction;
+	struct mv_u3d *u3d;
+	struct mv_u3d_ep_context *ep_context;
+	int retval = 0;
+
+	u3d = ep->u3d;
+	direction = mv_u3d_ep_dir(ep);
+
+	/* ep0 in and out share the same ep context slot 1*/
+	if (ep->ep_num == 0)
+		ep_context = &(u3d->ep_context[1]);
+	else
+		ep_context = &(u3d->ep_context[ep->ep_num * 2 + direction]);
+
+	/* check if the pipe is empty or not */
+	if (!list_empty(&ep->queue)) {
+		dev_err(u3d->dev, "add trb to non-empty queue!\n");
+		retval = -ENOMEM;
+		WARN_ON(1);
+	} else {
+		ep_context->rsvd0 = cpu_to_le32(1);
+		ep_context->rsvd1 = 0;
+
+		/* Configure the trb address and set the DCS bit.
+		 * Both DCS bit and own bit in trb should be set.
+		 */
+		ep_context->trb_addr_lo =
+			cpu_to_le32(req->trb_head->trb_dma | DCS_ENABLE);
+		ep_context->trb_addr_hi = 0;
+
+		/* Ensure that updates to the EP Context will
+		 * occure before Ring Bell.
+		 */
+		wmb();
+
+		/* ring bell the ep */
+		if (ep->ep_num == 0)
+			tmp = 0x1;
+		else
+			tmp = ep->ep_num * 2
+				+ ((direction == MV_U3D_EP_DIR_OUT) ? 0 : 1);
+
+		iowrite32(tmp, &u3d->op_regs->doorbell);
+	}
+	return retval;
+}
+
+static struct mv_u3d_trb *mv_u3d_build_trb_one(struct mv_u3d_req *req,
+				unsigned *length, dma_addr_t *dma)
+{
+	u32 temp;
+	unsigned int direction;
+	struct mv_u3d_trb *trb;
+	struct mv_u3d_trb_hw *trb_hw;
+	struct mv_u3d *u3d;
+
+	/* how big will this transfer be? */
+	*length = req->req.length - req->req.actual;
+	BUG_ON(*length > (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER);
+
+	u3d = req->ep->u3d;
+
+	trb = kzalloc(sizeof(*trb), GFP_ATOMIC);
+	if (!trb)
+		return NULL;
+
+	/*
+	 * Be careful that no _GFP_HIGHMEM is set,
+	 * or we can not use dma_to_virt
+	 * cannot use GFP_KERNEL in spin lock
+	 */
+	trb_hw = dma_pool_alloc(u3d->trb_pool, GFP_ATOMIC, dma);
+	if (!trb_hw) {
+		kfree(trb);
+		dev_err(u3d->dev,
+			"%s, dma_pool_alloc fail\n", __func__);
+		return NULL;
+	}
+	trb->trb_dma = *dma;
+	trb->trb_hw = trb_hw;
+
+	/* initialize buffer page pointers */
+	temp = (u32)(req->req.dma + req->req.actual);
+
+	trb_hw->buf_addr_lo = cpu_to_le32(temp);
+	trb_hw->buf_addr_hi = 0;
+	trb_hw->trb_len = cpu_to_le32(*length);
+	trb_hw->ctrl.own = 1;
+
+	if (req->ep->ep_num == 0)
+		trb_hw->ctrl.type = TYPE_DATA;
+	else
+		trb_hw->ctrl.type = TYPE_NORMAL;
+
+	req->req.actual += *length;
+
+	direction = mv_u3d_ep_dir(req->ep);
+	if (direction == MV_U3D_EP_DIR_IN)
+		trb_hw->ctrl.dir = 1;
+	else
+		trb_hw->ctrl.dir = 0;
+
+	/* Enable interrupt for the last trb of a request */
+	if (!req->req.no_interrupt)
+		trb_hw->ctrl.ioc = 1;
+
+	trb_hw->ctrl.chain = 0;
+
+	wmb();
+	return trb;
+}
+
+static int mv_u3d_build_trb_chain(struct mv_u3d_req *req, unsigned *length,
+		struct mv_u3d_trb *trb, int *is_last)
+{
+	u32 temp;
+	unsigned int direction;
+	struct mv_u3d *u3d;
+
+	/* how big will this transfer be? */
+	*length = min(req->req.length - req->req.actual,
+			(unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER);
+
+	u3d = req->ep->u3d;
+
+	trb->trb_dma = 0;
+
+	/* initialize buffer page pointers */
+	temp = (u32)(req->req.dma + req->req.actual);
+
+	trb->trb_hw->buf_addr_lo = cpu_to_le32(temp);
+	trb->trb_hw->buf_addr_hi = 0;
+	trb->trb_hw->trb_len = cpu_to_le32(*length);
+	trb->trb_hw->ctrl.own = 1;
+
+	if (req->ep->ep_num == 0)
+		trb->trb_hw->ctrl.type = TYPE_DATA;
+	else
+		trb->trb_hw->ctrl.type = TYPE_NORMAL;
+
+	req->req.actual += *length;
+
+	direction = mv_u3d_ep_dir(req->ep);
+	if (direction == MV_U3D_EP_DIR_IN)
+		trb->trb_hw->ctrl.dir = 1;
+	else
+		trb->trb_hw->ctrl.dir = 0;
+
+	/* zlp is needed if req->req.zero is set */
+	if (req->req.zero) {
+		if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
+			*is_last = 1;
+		else
+			*is_last = 0;
+	} else if (req->req.length == req->req.actual)
+		*is_last = 1;
+	else
+		*is_last = 0;
+
+	/* Enable interrupt for the last trb of a request */
+	if (*is_last && !req->req.no_interrupt)
+		trb->trb_hw->ctrl.ioc = 1;
+
+	if (*is_last)
+		trb->trb_hw->ctrl.chain = 0;
+	else {
+		trb->trb_hw->ctrl.chain = 1;
+		dev_dbg(u3d->dev, "chain trb\n");
+	}
+
+	wmb();
+
+	return 0;
+}
+
+/* generate TRB linked list for a request
+ * usb controller only supports continous trb chain,
+ * that trb structure physical address should be continous.
+ */
+static int mv_u3d_req_to_trb(struct mv_u3d_req *req)
+{
+	unsigned count;
+	int is_last;
+	struct mv_u3d_trb *trb;
+	struct mv_u3d_trb_hw *trb_hw;
+	struct mv_u3d *u3d;
+	dma_addr_t dma;
+	unsigned length;
+	unsigned trb_num;
+
+	u3d = req->ep->u3d;
+
+	INIT_LIST_HEAD(&req->trb_list);
+
+	length = req->req.length - req->req.actual;
+	/* normally the request transfer length is less than 16KB.
+	 * we use buil_trb_one() to optimize it.
+	 */
+	if (length <= (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER) {
+		trb = mv_u3d_build_trb_one(req, &count, &dma);
+		list_add_tail(&trb->trb_list, &req->trb_list);
+		req->trb_head = trb;
+		req->trb_count = 1;
+		req->chain = 0;
+	} else {
+		trb_num = length / MV_U3D_EP_MAX_LENGTH_TRANSFER;
+		if (length % MV_U3D_EP_MAX_LENGTH_TRANSFER)
+			trb_num++;
+
+		trb = kcalloc(trb_num, sizeof(*trb), GFP_ATOMIC);
+		if (!trb)
+			return -ENOMEM;
+
+		trb_hw = kcalloc(trb_num, sizeof(*trb_hw), GFP_ATOMIC);
+		if (!trb_hw) {
+			kfree(trb);
+			return -ENOMEM;
+		}
+
+		do {
+			trb->trb_hw = trb_hw;
+			if (mv_u3d_build_trb_chain(req, &count,
+						trb, &is_last)) {
+				dev_err(u3d->dev,
+					"%s, mv_u3d_build_trb_chain fail\n",
+					__func__);
+				return -EIO;
+			}
+
+			list_add_tail(&trb->trb_list, &req->trb_list);
+			req->trb_count++;
+			trb++;
+			trb_hw++;
+		} while (!is_last);
+
+		req->trb_head = list_entry(req->trb_list.next,
+					struct mv_u3d_trb, trb_list);
+		req->trb_head->trb_dma = dma_map_single(u3d->gadget.dev.parent,
+					req->trb_head->trb_hw,
+					trb_num * sizeof(*trb_hw),
+					DMA_BIDIRECTIONAL);
+		if (dma_mapping_error(u3d->gadget.dev.parent,
+					req->trb_head->trb_dma)) {
+			kfree(req->trb_head->trb_hw);
+			kfree(req->trb_head);
+			return -EFAULT;
+		}
+
+		req->chain = 1;
+	}
+
+	return 0;
+}
+
+static int
+mv_u3d_start_queue(struct mv_u3d_ep *ep)
+{
+	struct mv_u3d *u3d = ep->u3d;
+	struct mv_u3d_req *req;
+	int ret;
+
+	if (!list_empty(&ep->req_list) && !ep->processing)
+		req = list_entry(ep->req_list.next, struct mv_u3d_req, list);
+	else
+		return 0;
+
+	ep->processing = 1;
+
+	/* set up dma mapping */
+	ret = usb_gadget_map_request(&u3d->gadget, &req->req,
+					mv_u3d_ep_dir(ep));
+	if (ret)
+		goto break_processing;
+
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+	req->trb_count = 0;
+
+	/* build trbs */
+	ret = mv_u3d_req_to_trb(req);
+	if (ret) {
+		dev_err(u3d->dev, "%s, mv_u3d_req_to_trb fail\n", __func__);
+		goto break_processing;
+	}
+
+	/* and push them to device queue */
+	ret = mv_u3d_queue_trb(ep, req);
+	if (ret)
+		goto break_processing;
+
+	/* irq handler advances the queue */
+	list_add_tail(&req->queue, &ep->queue);
+
+	return 0;
+
+break_processing:
+	ep->processing = 0;
+	return ret;
+}
+
+static int mv_u3d_ep_enable(struct usb_ep *_ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct mv_u3d *u3d;
+	struct mv_u3d_ep *ep;
+	u16 max = 0;
+	unsigned maxburst = 0;
+	u32 epxcr, direction;
+
+	if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT)
+		return -EINVAL;
+
+	ep = container_of(_ep, struct mv_u3d_ep, ep);
+	u3d = ep->u3d;
+
+	if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	direction = mv_u3d_ep_dir(ep);
+	max = le16_to_cpu(desc->wMaxPacketSize);
+
+	if (!_ep->maxburst)
+		_ep->maxburst = 1;
+	maxburst = _ep->maxburst;
+
+	/* Set the max burst size */
+	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_BULK:
+		if (maxburst > 16) {
+			dev_dbg(u3d->dev,
+				"max burst should not be greater "
+				"than 16 on bulk ep\n");
+			maxburst = 1;
+			_ep->maxburst = maxburst;
+		}
+		dev_dbg(u3d->dev,
+			"maxburst: %d on bulk %s\n", maxburst, ep->name);
+		break;
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* control transfer only supports maxburst as one */
+		maxburst = 1;
+		_ep->maxburst = maxburst;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		if (maxburst != 1) {
+			dev_dbg(u3d->dev,
+				"max burst should be 1 on int ep "
+				"if transfer size is not 1024\n");
+			maxburst = 1;
+			_ep->maxburst = maxburst;
+		}
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (maxburst != 1) {
+			dev_dbg(u3d->dev,
+				"max burst should be 1 on isoc ep "
+				"if transfer size is not 1024\n");
+			maxburst = 1;
+			_ep->maxburst = maxburst;
+		}
+		break;
+	default:
+		goto en_done;
+	}
+
+	ep->ep.maxpacket = max;
+	ep->ep.desc = desc;
+	ep->enabled = 1;
+
+	/* Enable the endpoint for Rx or Tx and set the endpoint type */
+	if (direction == MV_U3D_EP_DIR_OUT) {
+		epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+		epxcr |= MV_U3D_EPXCR_EP_INIT;
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+		udelay(5);
+		epxcr &= ~MV_U3D_EPXCR_EP_INIT;
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+
+		epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
+		      | ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
+		      | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		      | (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK));
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
+	} else {
+		epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+		epxcr |= MV_U3D_EPXCR_EP_INIT;
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+		udelay(5);
+		epxcr &= ~MV_U3D_EPXCR_EP_INIT;
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+
+		epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
+		      | ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
+		      | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		      | (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK));
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
+	}
+
+	return 0;
+en_done:
+	return -EINVAL;
+}
+
+static int  mv_u3d_ep_disable(struct usb_ep *_ep)
+{
+	struct mv_u3d *u3d;
+	struct mv_u3d_ep *ep;
+	u32 epxcr, direction;
+	unsigned long flags;
+
+	if (!_ep)
+		return -EINVAL;
+
+	ep = container_of(_ep, struct mv_u3d_ep, ep);
+	if (!ep->ep.desc)
+		return -EINVAL;
+
+	u3d = ep->u3d;
+
+	direction = mv_u3d_ep_dir(ep);
+
+	/* nuke all pending requests (does flush) */
+	spin_lock_irqsave(&u3d->lock, flags);
+	mv_u3d_nuke(ep, -ESHUTDOWN);
+	spin_unlock_irqrestore(&u3d->lock, flags);
+
+	/* Disable the endpoint for Rx or Tx and reset the endpoint type */
+	if (direction == MV_U3D_EP_DIR_OUT) {
+		epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
+		epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		      | USB_ENDPOINT_XFERTYPE_MASK);
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
+	} else {
+		epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
+		epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		      | USB_ENDPOINT_XFERTYPE_MASK);
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
+	}
+
+	ep->enabled = 0;
+
+	ep->ep.desc = NULL;
+	return 0;
+}
+
+static struct usb_request *
+mv_u3d_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct mv_u3d_req *req = NULL;
+
+	req = kzalloc(sizeof *req, gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void mv_u3d_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct mv_u3d_req *req = container_of(_req, struct mv_u3d_req, req);
+
+	kfree(req);
+}
+
+static void mv_u3d_ep_fifo_flush(struct usb_ep *_ep)
+{
+	struct mv_u3d *u3d;
+	u32 direction;
+	struct mv_u3d_ep *ep = container_of(_ep, struct mv_u3d_ep, ep);
+	unsigned int loops;
+	u32 tmp;
+
+	/* if endpoint is not enabled, cannot flush endpoint */
+	if (!ep->enabled)
+		return;
+
+	u3d = ep->u3d;
+	direction = mv_u3d_ep_dir(ep);
+
+	/* ep0 need clear bit after flushing fifo. */
+	if (!ep->ep_num) {
+		if (direction == MV_U3D_EP_DIR_OUT) {
+			tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
+			tmp |= MV_U3D_EPXCR_EP_FLUSH;
+			iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
+			udelay(10);
+			tmp &= ~MV_U3D_EPXCR_EP_FLUSH;
+			iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
+		} else {
+			tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
+			tmp |= MV_U3D_EPXCR_EP_FLUSH;
+			iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
+			udelay(10);
+			tmp &= ~MV_U3D_EPXCR_EP_FLUSH;
+			iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
+		}
+		return;
+	}
+
+	if (direction == MV_U3D_EP_DIR_OUT) {
+		tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+		tmp |= MV_U3D_EPXCR_EP_FLUSH;
+		iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+
+		/* Wait until flushing completed */
+		loops = LOOPS(MV_U3D_FLUSH_TIMEOUT);
+		while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0) &
+			MV_U3D_EPXCR_EP_FLUSH) {
+			/*
+			 * EP_FLUSH bit should be cleared to indicate this
+			 * operation is complete
+			 */
+			if (loops == 0) {
+				dev_dbg(u3d->dev,
+				    "EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num,
+				    direction ? "in" : "out");
+				return;
+			}
+			loops--;
+			udelay(LOOPS_USEC);
+		}
+	} else {	/* EP_DIR_IN */
+		tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+		tmp |= MV_U3D_EPXCR_EP_FLUSH;
+		iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+
+		/* Wait until flushing completed */
+		loops = LOOPS(MV_U3D_FLUSH_TIMEOUT);
+		while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0) &
+			MV_U3D_EPXCR_EP_FLUSH) {
+			/*
+			* EP_FLUSH bit should be cleared to indicate this
+			* operation is complete
+			*/
+			if (loops == 0) {
+				dev_dbg(u3d->dev,
+				    "EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num,
+				    direction ? "in" : "out");
+				return;
+			}
+			loops--;
+			udelay(LOOPS_USEC);
+		}
+	}
+}
+
+/* queues (submits) an I/O request to an endpoint */
+static int
+mv_u3d_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct mv_u3d_ep *ep;
+	struct mv_u3d_req *req;
+	struct mv_u3d *u3d;
+	unsigned long flags;
+	int is_first_req = 0;
+
+	if (unlikely(!_ep || !_req))
+		return -EINVAL;
+
+	ep = container_of(_ep, struct mv_u3d_ep, ep);
+	u3d = ep->u3d;
+
+	req = container_of(_req, struct mv_u3d_req, req);
+
+	if (!ep->ep_num
+		&& u3d->ep0_state == MV_U3D_STATUS_STAGE
+		&& !_req->length) {
+		dev_dbg(u3d->dev, "ep0 status stage\n");
+		u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
+		return 0;
+	}
+
+	dev_dbg(u3d->dev, "%s: %s, req: 0x%p\n",
+			__func__, _ep->name, req);
+
+	/* catch various bogus parameters */
+	if (!req->req.complete || !req->req.buf
+			|| !list_empty(&req->queue)) {
+		dev_err(u3d->dev,
+			"%s, bad params, _req: 0x%p,"
+			"req->req.complete: 0x%p, req->req.buf: 0x%p,"
+			"list_empty: 0x%x\n",
+			__func__, _req,
+			req->req.complete, req->req.buf,
+			list_empty(&req->queue));
+		return -EINVAL;
+	}
+	if (unlikely(!ep->ep.desc)) {
+		dev_err(u3d->dev, "%s, bad ep\n", __func__);
+		return -EINVAL;
+	}
+	if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+		if (req->req.length > ep->ep.maxpacket)
+			return -EMSGSIZE;
+	}
+
+	if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN) {
+		dev_err(u3d->dev,
+			"bad params of driver/speed\n");
+		return -ESHUTDOWN;
+	}
+
+	req->ep = ep;
+
+	/* Software list handles usb request. */
+	spin_lock_irqsave(&ep->req_lock, flags);
+	is_first_req = list_empty(&ep->req_list);
+	list_add_tail(&req->list, &ep->req_list);
+	spin_unlock_irqrestore(&ep->req_lock, flags);
+	if (!is_first_req) {
+		dev_dbg(u3d->dev, "list is not empty\n");
+		return 0;
+	}
+
+	dev_dbg(u3d->dev, "call mv_u3d_start_queue from usb_ep_queue\n");
+	spin_lock_irqsave(&u3d->lock, flags);
+	mv_u3d_start_queue(ep);
+	spin_unlock_irqrestore(&u3d->lock, flags);
+	return 0;
+}
+
+/* dequeues (cancels, unlinks) an I/O request from an endpoint */
+static int mv_u3d_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct mv_u3d_ep *ep;
+	struct mv_u3d_req *req = NULL, *iter;
+	struct mv_u3d *u3d;
+	struct mv_u3d_ep_context *ep_context;
+	struct mv_u3d_req *next_req;
+
+	unsigned long flags;
+	int ret = 0;
+
+	if (!_ep || !_req)
+		return -EINVAL;
+
+	ep = container_of(_ep, struct mv_u3d_ep, ep);
+	u3d = ep->u3d;
+
+	spin_lock_irqsave(&ep->u3d->lock, flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		req = iter;
+		break;
+	}
+	if (!req) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* The request is in progress, or completed but not dequeued */
+	if (ep->queue.next == &req->queue) {
+		_req->status = -ECONNRESET;
+		mv_u3d_ep_fifo_flush(_ep);
+
+		/* The request isn't the last request in this ep queue */
+		if (req->queue.next != &ep->queue) {
+			dev_dbg(u3d->dev,
+				"it is the last request in this ep queue\n");
+			ep_context = ep->ep_context;
+			next_req = list_entry(req->queue.next,
+					struct mv_u3d_req, queue);
+
+			/* Point first TRB of next request to the EP context. */
+			iowrite32((unsigned long) next_req->trb_head,
+					&ep_context->trb_addr_lo);
+		} else {
+			struct mv_u3d_ep_context *ep_context;
+			ep_context = ep->ep_context;
+			ep_context->trb_addr_lo = 0;
+			ep_context->trb_addr_hi = 0;
+		}
+
+	} else
+		WARN_ON(1);
+
+	mv_u3d_done(ep, req, -ECONNRESET);
+
+	/* remove the req from the ep req list */
+	if (!list_empty(&ep->req_list)) {
+		struct mv_u3d_req *curr_req;
+		curr_req = list_entry(ep->req_list.next,
+					struct mv_u3d_req, list);
+		if (curr_req == req) {
+			list_del_init(&req->list);
+			ep->processing = 0;
+		}
+	}
+
+out:
+	spin_unlock_irqrestore(&ep->u3d->lock, flags);
+	return ret;
+}
+
+static void
+mv_u3d_ep_set_stall(struct mv_u3d *u3d, u8 ep_num, u8 direction, int stall)
+{
+	u32 tmp;
+	struct mv_u3d_ep *ep = u3d->eps;
+
+	dev_dbg(u3d->dev, "%s\n", __func__);
+	if (direction == MV_U3D_EP_DIR_OUT) {
+		tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+		if (stall)
+			tmp |= MV_U3D_EPXCR_EP_HALT;
+		else
+			tmp &= ~MV_U3D_EPXCR_EP_HALT;
+		iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+	} else {
+		tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+		if (stall)
+			tmp |= MV_U3D_EPXCR_EP_HALT;
+		else
+			tmp &= ~MV_U3D_EPXCR_EP_HALT;
+		iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+	}
+}
+
+static int mv_u3d_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge)
+{
+	struct mv_u3d_ep *ep;
+	unsigned long flags;
+	int status = 0;
+	struct mv_u3d *u3d;
+
+	ep = container_of(_ep, struct mv_u3d_ep, ep);
+	u3d = ep->u3d;
+	if (!ep->ep.desc) {
+		status = -EINVAL;
+		goto out;
+	}
+
+	if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+		status = -EOPNOTSUPP;
+		goto out;
+	}
+
+	/*
+	 * Attempt to halt IN ep will fail if any transfer requests
+	 * are still queue
+	 */
+	if (halt && (mv_u3d_ep_dir(ep) == MV_U3D_EP_DIR_IN)
+			&& !list_empty(&ep->queue)) {
+		status = -EAGAIN;
+		goto out;
+	}
+
+	spin_lock_irqsave(&ep->u3d->lock, flags);
+	mv_u3d_ep_set_stall(u3d, ep->ep_num, mv_u3d_ep_dir(ep), halt);
+	if (halt && wedge)
+		ep->wedge = 1;
+	else if (!halt)
+		ep->wedge = 0;
+	spin_unlock_irqrestore(&ep->u3d->lock, flags);
+
+	if (ep->ep_num == 0)
+		u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
+out:
+	return status;
+}
+
+static int mv_u3d_ep_set_halt(struct usb_ep *_ep, int halt)
+{
+	return mv_u3d_ep_set_halt_wedge(_ep, halt, 0);
+}
+
+static int mv_u3d_ep_set_wedge(struct usb_ep *_ep)
+{
+	return mv_u3d_ep_set_halt_wedge(_ep, 1, 1);
+}
+
+static const struct usb_ep_ops mv_u3d_ep_ops = {
+	.enable		= mv_u3d_ep_enable,
+	.disable	= mv_u3d_ep_disable,
+
+	.alloc_request	= mv_u3d_alloc_request,
+	.free_request	= mv_u3d_free_request,
+
+	.queue		= mv_u3d_ep_queue,
+	.dequeue	= mv_u3d_ep_dequeue,
+
+	.set_wedge	= mv_u3d_ep_set_wedge,
+	.set_halt	= mv_u3d_ep_set_halt,
+	.fifo_flush	= mv_u3d_ep_fifo_flush,
+};
+
+static void mv_u3d_controller_stop(struct mv_u3d *u3d)
+{
+	u32 tmp;
+
+	if (!u3d->clock_gating && u3d->vbus_valid_detect)
+		iowrite32(MV_U3D_INTR_ENABLE_VBUS_VALID,
+				&u3d->vuc_regs->intrenable);
+	else
+		iowrite32(0, &u3d->vuc_regs->intrenable);
+	iowrite32(~0x0, &u3d->vuc_regs->endcomplete);
+	iowrite32(~0x0, &u3d->vuc_regs->trbunderrun);
+	iowrite32(~0x0, &u3d->vuc_regs->trbcomplete);
+	iowrite32(~0x0, &u3d->vuc_regs->linkchange);
+	iowrite32(0x1, &u3d->vuc_regs->setuplock);
+
+	/* Reset the RUN bit in the command register to stop USB */
+	tmp = ioread32(&u3d->op_regs->usbcmd);
+	tmp &= ~MV_U3D_CMD_RUN_STOP;
+	iowrite32(tmp, &u3d->op_regs->usbcmd);
+	dev_dbg(u3d->dev, "after u3d_stop, USBCMD 0x%x\n",
+		ioread32(&u3d->op_regs->usbcmd));
+}
+
+static void mv_u3d_controller_start(struct mv_u3d *u3d)
+{
+	u32 usbintr;
+	u32 temp;
+
+	/* enable link LTSSM state machine */
+	temp = ioread32(&u3d->vuc_regs->ltssm);
+	temp |= MV_U3D_LTSSM_PHY_INIT_DONE;
+	iowrite32(temp, &u3d->vuc_regs->ltssm);
+
+	/* Enable interrupts */
+	usbintr = MV_U3D_INTR_ENABLE_LINK_CHG | MV_U3D_INTR_ENABLE_TXDESC_ERR |
+		MV_U3D_INTR_ENABLE_RXDESC_ERR | MV_U3D_INTR_ENABLE_TX_COMPLETE |
+		MV_U3D_INTR_ENABLE_RX_COMPLETE | MV_U3D_INTR_ENABLE_SETUP |
+		(u3d->vbus_valid_detect ? MV_U3D_INTR_ENABLE_VBUS_VALID : 0);
+	iowrite32(usbintr, &u3d->vuc_regs->intrenable);
+
+	/* Enable ctrl ep */
+	iowrite32(0x1, &u3d->vuc_regs->ctrlepenable);
+
+	/* Set the Run bit in the command register */
+	iowrite32(MV_U3D_CMD_RUN_STOP, &u3d->op_regs->usbcmd);
+	dev_dbg(u3d->dev, "after u3d_start, USBCMD 0x%x\n",
+		ioread32(&u3d->op_regs->usbcmd));
+}
+
+static int mv_u3d_controller_reset(struct mv_u3d *u3d)
+{
+	unsigned int loops;
+	u32 tmp;
+
+	/* Stop the controller */
+	tmp = ioread32(&u3d->op_regs->usbcmd);
+	tmp &= ~MV_U3D_CMD_RUN_STOP;
+	iowrite32(tmp, &u3d->op_regs->usbcmd);
+
+	/* Reset the controller to get default values */
+	iowrite32(MV_U3D_CMD_CTRL_RESET, &u3d->op_regs->usbcmd);
+
+	/* wait for reset to complete */
+	loops = LOOPS(MV_U3D_RESET_TIMEOUT);
+	while (ioread32(&u3d->op_regs->usbcmd) & MV_U3D_CMD_CTRL_RESET) {
+		if (loops == 0) {
+			dev_err(u3d->dev,
+				"Wait for RESET completed TIMEOUT\n");
+			return -ETIMEDOUT;
+		}
+		loops--;
+		udelay(LOOPS_USEC);
+	}
+
+	/* Configure the Endpoint Context Address */
+	iowrite32(u3d->ep_context_dma, &u3d->op_regs->dcbaapl);
+	iowrite32(0, &u3d->op_regs->dcbaaph);
+
+	return 0;
+}
+
+static int mv_u3d_enable(struct mv_u3d *u3d)
+{
+	struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev);
+	int retval;
+
+	if (u3d->active)
+		return 0;
+
+	if (!u3d->clock_gating) {
+		u3d->active = 1;
+		return 0;
+	}
+
+	dev_dbg(u3d->dev, "enable u3d\n");
+	clk_enable(u3d->clk);
+	if (pdata->phy_init) {
+		retval = pdata->phy_init(u3d->phy_regs);
+		if (retval) {
+			dev_err(u3d->dev,
+				"init phy error %d\n", retval);
+			clk_disable(u3d->clk);
+			return retval;
+		}
+	}
+	u3d->active = 1;
+
+	return 0;
+}
+
+static void mv_u3d_disable(struct mv_u3d *u3d)
+{
+	struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev);
+	if (u3d->clock_gating && u3d->active) {
+		dev_dbg(u3d->dev, "disable u3d\n");
+		if (pdata->phy_deinit)
+			pdata->phy_deinit(u3d->phy_regs);
+		clk_disable(u3d->clk);
+		u3d->active = 0;
+	}
+}
+
+static int mv_u3d_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct mv_u3d *u3d;
+	unsigned long flags;
+	int retval = 0;
+
+	u3d = container_of(gadget, struct mv_u3d, gadget);
+
+	spin_lock_irqsave(&u3d->lock, flags);
+
+	u3d->vbus_active = (is_active != 0);
+	dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n",
+		__func__, u3d->softconnect, u3d->vbus_active);
+	/*
+	 * 1. external VBUS detect: we can disable/enable clock on demand.
+	 * 2. UDC VBUS detect: we have to enable clock all the time.
+	 * 3. No VBUS detect: we have to enable clock all the time.
+	 */
+	if (u3d->driver && u3d->softconnect && u3d->vbus_active) {
+		retval = mv_u3d_enable(u3d);
+		if (retval == 0) {
+			/*
+			 * after clock is disabled, we lost all the register
+			 *  context. We have to re-init registers
+			 */
+			mv_u3d_controller_reset(u3d);
+			mv_u3d_ep0_reset(u3d);
+			mv_u3d_controller_start(u3d);
+		}
+	} else if (u3d->driver && u3d->softconnect) {
+		if (!u3d->active)
+			goto out;
+
+		/* stop all the transfer in queue*/
+		mv_u3d_stop_activity(u3d, u3d->driver);
+		mv_u3d_controller_stop(u3d);
+		mv_u3d_disable(u3d);
+	}
+
+out:
+	spin_unlock_irqrestore(&u3d->lock, flags);
+	return retval;
+}
+
+/* constrain controller's VBUS power usage
+ * This call is used by gadget drivers during SET_CONFIGURATION calls,
+ * reporting how much power the device may consume.  For example, this
+ * could affect how quickly batteries are recharged.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static int mv_u3d_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget);
+
+	u3d->power = mA;
+
+	return 0;
+}
+
+static int mv_u3d_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget);
+	unsigned long flags;
+	int retval = 0;
+
+	spin_lock_irqsave(&u3d->lock, flags);
+
+	dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n",
+		__func__, u3d->softconnect, u3d->vbus_active);
+	u3d->softconnect = (is_on != 0);
+	if (u3d->driver && u3d->softconnect && u3d->vbus_active) {
+		retval = mv_u3d_enable(u3d);
+		if (retval == 0) {
+			/*
+			 * after clock is disabled, we lost all the register
+			 *  context. We have to re-init registers
+			 */
+			mv_u3d_controller_reset(u3d);
+			mv_u3d_ep0_reset(u3d);
+			mv_u3d_controller_start(u3d);
+		}
+	} else if (u3d->driver && u3d->vbus_active) {
+		/* stop all the transfer in queue*/
+		mv_u3d_stop_activity(u3d, u3d->driver);
+		mv_u3d_controller_stop(u3d);
+		mv_u3d_disable(u3d);
+	}
+
+	spin_unlock_irqrestore(&u3d->lock, flags);
+
+	return retval;
+}
+
+static int mv_u3d_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget);
+	struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev);
+	unsigned long flags;
+
+	if (u3d->driver)
+		return -EBUSY;
+
+	spin_lock_irqsave(&u3d->lock, flags);
+
+	if (!u3d->clock_gating) {
+		clk_enable(u3d->clk);
+		if (pdata->phy_init)
+			pdata->phy_init(u3d->phy_regs);
+	}
+
+	/* hook up the driver ... */
+	u3d->driver = driver;
+
+	u3d->ep0_dir = USB_DIR_OUT;
+
+	spin_unlock_irqrestore(&u3d->lock, flags);
+
+	u3d->vbus_valid_detect = 1;
+
+	return 0;
+}
+
+static int mv_u3d_stop(struct usb_gadget *g)
+{
+	struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget);
+	struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev);
+	unsigned long flags;
+
+	u3d->vbus_valid_detect = 0;
+	spin_lock_irqsave(&u3d->lock, flags);
+
+	/* enable clock to access controller register */
+	clk_enable(u3d->clk);
+	if (pdata->phy_init)
+		pdata->phy_init(u3d->phy_regs);
+
+	mv_u3d_controller_stop(u3d);
+	/* stop all usb activities */
+	u3d->gadget.speed = USB_SPEED_UNKNOWN;
+	mv_u3d_stop_activity(u3d, NULL);
+	mv_u3d_disable(u3d);
+
+	if (pdata->phy_deinit)
+		pdata->phy_deinit(u3d->phy_regs);
+	clk_disable(u3d->clk);
+
+	spin_unlock_irqrestore(&u3d->lock, flags);
+
+	u3d->driver = NULL;
+
+	return 0;
+}
+
+/* device controller usb_gadget_ops structure */
+static const struct usb_gadget_ops mv_u3d_ops = {
+	/* notify controller that VBUS is powered or not */
+	.vbus_session	= mv_u3d_vbus_session,
+
+	/* constrain controller's VBUS power usage */
+	.vbus_draw	= mv_u3d_vbus_draw,
+
+	.pullup		= mv_u3d_pullup,
+	.udc_start	= mv_u3d_start,
+	.udc_stop	= mv_u3d_stop,
+};
+
+static int mv_u3d_eps_init(struct mv_u3d *u3d)
+{
+	struct mv_u3d_ep	*ep;
+	char name[14];
+	int i;
+
+	/* initialize ep0, ep0 in/out use eps[1] */
+	ep = &u3d->eps[1];
+	ep->u3d = u3d;
+	strncpy(ep->name, "ep0", sizeof(ep->name));
+	ep->ep.name = ep->name;
+	ep->ep.ops = &mv_u3d_ep_ops;
+	ep->wedge = 0;
+	usb_ep_set_maxpacket_limit(&ep->ep, MV_U3D_EP0_MAX_PKT_SIZE);
+	ep->ep.caps.type_control = true;
+	ep->ep.caps.dir_in = true;
+	ep->ep.caps.dir_out = true;
+	ep->ep_num = 0;
+	ep->ep.desc = &mv_u3d_ep0_desc;
+	INIT_LIST_HEAD(&ep->queue);
+	INIT_LIST_HEAD(&ep->req_list);
+	ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
+
+	/* add ep0 ep_context */
+	ep->ep_context = &u3d->ep_context[1];
+
+	/* initialize other endpoints */
+	for (i = 2; i < u3d->max_eps * 2; i++) {
+		ep = &u3d->eps[i];
+		if (i & 1) {
+			snprintf(name, sizeof(name), "ep%din", i >> 1);
+			ep->direction = MV_U3D_EP_DIR_IN;
+			ep->ep.caps.dir_in = true;
+		} else {
+			snprintf(name, sizeof(name), "ep%dout", i >> 1);
+			ep->direction = MV_U3D_EP_DIR_OUT;
+			ep->ep.caps.dir_out = true;
+		}
+		ep->u3d = u3d;
+		strncpy(ep->name, name, sizeof(ep->name));
+		ep->ep.name = ep->name;
+
+		ep->ep.caps.type_iso = true;
+		ep->ep.caps.type_bulk = true;
+		ep->ep.caps.type_int = true;
+
+		ep->ep.ops = &mv_u3d_ep_ops;
+		usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
+		ep->ep_num = i / 2;
+
+		INIT_LIST_HEAD(&ep->queue);
+		list_add_tail(&ep->ep.ep_list, &u3d->gadget.ep_list);
+
+		INIT_LIST_HEAD(&ep->req_list);
+		spin_lock_init(&ep->req_lock);
+		ep->ep_context = &u3d->ep_context[i];
+	}
+
+	return 0;
+}
+
+/* delete all endpoint requests, called with spinlock held */
+static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status)
+{
+	/* endpoint fifo flush */
+	mv_u3d_ep_fifo_flush(&ep->ep);
+
+	while (!list_empty(&ep->queue)) {
+		struct mv_u3d_req *req = NULL;
+		req = list_entry(ep->queue.next, struct mv_u3d_req, queue);
+		mv_u3d_done(ep, req, status);
+	}
+}
+
+/* stop all USB activities */
+static
+void mv_u3d_stop_activity(struct mv_u3d *u3d, struct usb_gadget_driver *driver)
+{
+	struct mv_u3d_ep	*ep;
+
+	mv_u3d_nuke(&u3d->eps[1], -ESHUTDOWN);
+
+	list_for_each_entry(ep, &u3d->gadget.ep_list, ep.ep_list) {
+		mv_u3d_nuke(ep, -ESHUTDOWN);
+	}
+
+	/* report disconnect; the driver is already quiesced */
+	if (driver) {
+		spin_unlock(&u3d->lock);
+		driver->disconnect(&u3d->gadget);
+		spin_lock(&u3d->lock);
+	}
+}
+
+static void mv_u3d_irq_process_error(struct mv_u3d *u3d)
+{
+	/* Increment the error count */
+	u3d->errors++;
+	dev_err(u3d->dev, "%s\n", __func__);
+}
+
+static void mv_u3d_irq_process_link_change(struct mv_u3d *u3d)
+{
+	u32 linkchange;
+
+	linkchange = ioread32(&u3d->vuc_regs->linkchange);
+	iowrite32(linkchange, &u3d->vuc_regs->linkchange);
+
+	dev_dbg(u3d->dev, "linkchange: 0x%x\n", linkchange);
+
+	if (linkchange & MV_U3D_LINK_CHANGE_LINK_UP) {
+		dev_dbg(u3d->dev, "link up: ltssm state: 0x%x\n",
+			ioread32(&u3d->vuc_regs->ltssmstate));
+
+		u3d->usb_state = USB_STATE_DEFAULT;
+		u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
+		u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
+
+		/* set speed */
+		u3d->gadget.speed = USB_SPEED_SUPER;
+	}
+
+	if (linkchange & MV_U3D_LINK_CHANGE_SUSPEND) {
+		dev_dbg(u3d->dev, "link suspend\n");
+		u3d->resume_state = u3d->usb_state;
+		u3d->usb_state = USB_STATE_SUSPENDED;
+	}
+
+	if (linkchange & MV_U3D_LINK_CHANGE_RESUME) {
+		dev_dbg(u3d->dev, "link resume\n");
+		u3d->usb_state = u3d->resume_state;
+		u3d->resume_state = 0;
+	}
+
+	if (linkchange & MV_U3D_LINK_CHANGE_WRESET) {
+		dev_dbg(u3d->dev, "warm reset\n");
+		u3d->usb_state = USB_STATE_POWERED;
+	}
+
+	if (linkchange & MV_U3D_LINK_CHANGE_HRESET) {
+		dev_dbg(u3d->dev, "hot reset\n");
+		u3d->usb_state = USB_STATE_DEFAULT;
+	}
+
+	if (linkchange & MV_U3D_LINK_CHANGE_INACT)
+		dev_dbg(u3d->dev, "inactive\n");
+
+	if (linkchange & MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0)
+		dev_dbg(u3d->dev, "ss.disabled\n");
+
+	if (linkchange & MV_U3D_LINK_CHANGE_VBUS_INVALID) {
+		dev_dbg(u3d->dev, "vbus invalid\n");
+		u3d->usb_state = USB_STATE_ATTACHED;
+		u3d->vbus_valid_detect = 1;
+		/* if external vbus detect is not supported,
+		 * we handle it here.
+		 */
+		if (!u3d->vbus) {
+			spin_unlock(&u3d->lock);
+			mv_u3d_vbus_session(&u3d->gadget, 0);
+			spin_lock(&u3d->lock);
+		}
+	}
+}
+
+static void mv_u3d_ch9setaddress(struct mv_u3d *u3d,
+				struct usb_ctrlrequest *setup)
+{
+	u32 tmp;
+
+	if (u3d->usb_state != USB_STATE_DEFAULT) {
+		dev_err(u3d->dev,
+			"%s, cannot setaddr in this state (%d)\n",
+			__func__, u3d->usb_state);
+		goto err;
+	}
+
+	u3d->dev_addr = (u8)setup->wValue;
+
+	dev_dbg(u3d->dev, "%s: 0x%x\n", __func__, u3d->dev_addr);
+
+	if (u3d->dev_addr > 127) {
+		dev_err(u3d->dev,
+			"%s, u3d address is wrong (out of range)\n", __func__);
+		u3d->dev_addr = 0;
+		goto err;
+	}
+
+	/* update usb state */
+	u3d->usb_state = USB_STATE_ADDRESS;
+
+	/* set the new address */
+	tmp = ioread32(&u3d->vuc_regs->devaddrtiebrkr);
+	tmp &= ~0x7F;
+	tmp |= (u32)u3d->dev_addr;
+	iowrite32(tmp, &u3d->vuc_regs->devaddrtiebrkr);
+
+	return;
+err:
+	mv_u3d_ep0_stall(u3d);
+}
+
+static int mv_u3d_is_set_configuration(struct usb_ctrlrequest *setup)
+{
+	if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+		if (setup->bRequest == USB_REQ_SET_CONFIGURATION)
+			return 1;
+
+	return 0;
+}
+
+static void mv_u3d_handle_setup_packet(struct mv_u3d *u3d, u8 ep_num,
+	struct usb_ctrlrequest *setup)
+	__releases(&u3c->lock)
+	__acquires(&u3c->lock)
+{
+	bool delegate = false;
+
+	mv_u3d_nuke(&u3d->eps[ep_num * 2 + MV_U3D_EP_DIR_IN], -ESHUTDOWN);
+
+	dev_dbg(u3d->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+			setup->bRequestType, setup->bRequest,
+			setup->wValue, setup->wIndex, setup->wLength);
+
+	/* We process some stardard setup requests here */
+	if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (setup->bRequest) {
+		case USB_REQ_GET_STATUS:
+			delegate = true;
+			break;
+
+		case USB_REQ_SET_ADDRESS:
+			mv_u3d_ch9setaddress(u3d, setup);
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+			delegate = true;
+			break;
+
+		case USB_REQ_SET_FEATURE:
+			delegate = true;
+			break;
+
+		default:
+			delegate = true;
+		}
+	} else
+		delegate = true;
+
+	/* delegate USB standard requests to the gadget driver */
+	if (delegate) {
+		/* USB requests handled by gadget */
+		if (setup->wLength) {
+			/* DATA phase from gadget, STATUS phase from u3d */
+			u3d->ep0_dir = (setup->bRequestType & USB_DIR_IN)
+					? MV_U3D_EP_DIR_IN : MV_U3D_EP_DIR_OUT;
+			spin_unlock(&u3d->lock);
+			if (u3d->driver->setup(&u3d->gadget,
+				&u3d->local_setup_buff) < 0) {
+				dev_err(u3d->dev, "setup error!\n");
+				mv_u3d_ep0_stall(u3d);
+			}
+			spin_lock(&u3d->lock);
+		} else {
+			/* no DATA phase, STATUS phase from gadget */
+			u3d->ep0_dir = MV_U3D_EP_DIR_IN;
+			u3d->ep0_state = MV_U3D_STATUS_STAGE;
+			spin_unlock(&u3d->lock);
+			if (u3d->driver->setup(&u3d->gadget,
+				&u3d->local_setup_buff) < 0)
+				mv_u3d_ep0_stall(u3d);
+			spin_lock(&u3d->lock);
+		}
+
+		if (mv_u3d_is_set_configuration(setup)) {
+			dev_dbg(u3d->dev, "u3d configured\n");
+			u3d->usb_state = USB_STATE_CONFIGURED;
+		}
+	}
+}
+
+static void mv_u3d_get_setup_data(struct mv_u3d *u3d, u8 ep_num, u8 *buffer_ptr)
+{
+	struct mv_u3d_ep_context *epcontext;
+
+	epcontext = &u3d->ep_context[ep_num * 2 + MV_U3D_EP_DIR_IN];
+
+	/* Copy the setup packet to local buffer */
+	memcpy(buffer_ptr, (u8 *) &epcontext->setup_buffer, 8);
+}
+
+static void mv_u3d_irq_process_setup(struct mv_u3d *u3d)
+{
+	u32 tmp, i;
+	/* Process all Setup packet received interrupts */
+	tmp = ioread32(&u3d->vuc_regs->setuplock);
+	if (tmp) {
+		for (i = 0; i < u3d->max_eps; i++) {
+			if (tmp & (1 << i)) {
+				mv_u3d_get_setup_data(u3d, i,
+					(u8 *)(&u3d->local_setup_buff));
+				mv_u3d_handle_setup_packet(u3d, i,
+					&u3d->local_setup_buff);
+			}
+		}
+	}
+
+	iowrite32(tmp, &u3d->vuc_regs->setuplock);
+}
+
+static void mv_u3d_irq_process_tr_complete(struct mv_u3d *u3d)
+{
+	u32 tmp, bit_pos;
+	int i, ep_num = 0, direction = 0;
+	struct mv_u3d_ep	*curr_ep;
+	struct mv_u3d_req *curr_req, *temp_req;
+	int status;
+
+	tmp = ioread32(&u3d->vuc_regs->endcomplete);
+
+	dev_dbg(u3d->dev, "tr_complete: ep: 0x%x\n", tmp);
+	if (!tmp)
+		return;
+	iowrite32(tmp, &u3d->vuc_regs->endcomplete);
+
+	for (i = 0; i < u3d->max_eps * 2; i++) {
+		ep_num = i >> 1;
+		direction = i % 2;
+
+		bit_pos = 1 << (ep_num + 16 * direction);
+
+		if (!(bit_pos & tmp))
+			continue;
+
+		if (i == 0)
+			curr_ep = &u3d->eps[1];
+		else
+			curr_ep = &u3d->eps[i];
+
+		/* remove req out of ep request list after completion */
+		dev_dbg(u3d->dev, "tr comp: check req_list\n");
+		spin_lock(&curr_ep->req_lock);
+		if (!list_empty(&curr_ep->req_list)) {
+			struct mv_u3d_req *req;
+			req = list_entry(curr_ep->req_list.next,
+						struct mv_u3d_req, list);
+			list_del_init(&req->list);
+			curr_ep->processing = 0;
+		}
+		spin_unlock(&curr_ep->req_lock);
+
+		/* process the req queue until an uncomplete request */
+		list_for_each_entry_safe(curr_req, temp_req,
+			&curr_ep->queue, queue) {
+			status = mv_u3d_process_ep_req(u3d, i, curr_req);
+			if (status)
+				break;
+			/* write back status to req */
+			curr_req->req.status = status;
+
+			/* ep0 request completion */
+			if (ep_num == 0) {
+				mv_u3d_done(curr_ep, curr_req, 0);
+				break;
+			} else {
+				mv_u3d_done(curr_ep, curr_req, status);
+			}
+		}
+
+		dev_dbg(u3d->dev, "call mv_u3d_start_queue from ep complete\n");
+		mv_u3d_start_queue(curr_ep);
+	}
+}
+
+static irqreturn_t mv_u3d_irq(int irq, void *dev)
+{
+	struct mv_u3d *u3d = (struct mv_u3d *)dev;
+	u32 status, intr;
+	u32 bridgesetting;
+	u32 trbunderrun;
+
+	spin_lock(&u3d->lock);
+
+	status = ioread32(&u3d->vuc_regs->intrcause);
+	intr = ioread32(&u3d->vuc_regs->intrenable);
+	status &= intr;
+
+	if (status == 0) {
+		spin_unlock(&u3d->lock);
+		dev_err(u3d->dev, "irq error!\n");
+		return IRQ_NONE;
+	}
+
+	if (status & MV_U3D_USBINT_VBUS_VALID) {
+		bridgesetting = ioread32(&u3d->vuc_regs->bridgesetting);
+		if (bridgesetting & MV_U3D_BRIDGE_SETTING_VBUS_VALID) {
+			/* write vbus valid bit of bridge setting to clear */
+			bridgesetting = MV_U3D_BRIDGE_SETTING_VBUS_VALID;
+			iowrite32(bridgesetting, &u3d->vuc_regs->bridgesetting);
+			dev_dbg(u3d->dev, "vbus valid\n");
+
+			u3d->usb_state = USB_STATE_POWERED;
+			u3d->vbus_valid_detect = 0;
+			/* if external vbus detect is not supported,
+			 * we handle it here.
+			 */
+			if (!u3d->vbus) {
+				spin_unlock(&u3d->lock);
+				mv_u3d_vbus_session(&u3d->gadget, 1);
+				spin_lock(&u3d->lock);
+			}
+		} else
+			dev_err(u3d->dev, "vbus bit is not set\n");
+	}
+
+	/* RX data is already in the 16KB FIFO.*/
+	if (status & MV_U3D_USBINT_UNDER_RUN) {
+		trbunderrun = ioread32(&u3d->vuc_regs->trbunderrun);
+		dev_err(u3d->dev, "under run, ep%d\n", trbunderrun);
+		iowrite32(trbunderrun, &u3d->vuc_regs->trbunderrun);
+		mv_u3d_irq_process_error(u3d);
+	}
+
+	if (status & (MV_U3D_USBINT_RXDESC_ERR | MV_U3D_USBINT_TXDESC_ERR)) {
+		/* write one to clear */
+		iowrite32(status & (MV_U3D_USBINT_RXDESC_ERR
+			| MV_U3D_USBINT_TXDESC_ERR),
+			&u3d->vuc_regs->intrcause);
+		dev_err(u3d->dev, "desc err 0x%x\n", status);
+		mv_u3d_irq_process_error(u3d);
+	}
+
+	if (status & MV_U3D_USBINT_LINK_CHG)
+		mv_u3d_irq_process_link_change(u3d);
+
+	if (status & MV_U3D_USBINT_TX_COMPLETE)
+		mv_u3d_irq_process_tr_complete(u3d);
+
+	if (status & MV_U3D_USBINT_RX_COMPLETE)
+		mv_u3d_irq_process_tr_complete(u3d);
+
+	if (status & MV_U3D_USBINT_SETUP)
+		mv_u3d_irq_process_setup(u3d);
+
+	spin_unlock(&u3d->lock);
+	return IRQ_HANDLED;
+}
+
+static int mv_u3d_remove(struct platform_device *dev)
+{
+	struct mv_u3d *u3d = platform_get_drvdata(dev);
+
+	BUG_ON(u3d == NULL);
+
+	usb_del_gadget_udc(&u3d->gadget);
+
+	/* free memory allocated in probe */
+	dma_pool_destroy(u3d->trb_pool);
+
+	if (u3d->ep_context)
+		dma_free_coherent(&dev->dev, u3d->ep_context_size,
+			u3d->ep_context, u3d->ep_context_dma);
+
+	kfree(u3d->eps);
+
+	if (u3d->irq)
+		free_irq(u3d->irq, u3d);
+
+	if (u3d->cap_regs)
+		iounmap(u3d->cap_regs);
+	u3d->cap_regs = NULL;
+
+	kfree(u3d->status_req);
+
+	clk_put(u3d->clk);
+
+	kfree(u3d);
+
+	return 0;
+}
+
+static int mv_u3d_probe(struct platform_device *dev)
+{
+	struct mv_u3d *u3d = NULL;
+	struct mv_usb_platform_data *pdata = dev_get_platdata(&dev->dev);
+	int retval = 0;
+	struct resource *r;
+	size_t size;
+
+	if (!dev_get_platdata(&dev->dev)) {
+		dev_err(&dev->dev, "missing platform_data\n");
+		retval = -ENODEV;
+		goto err_pdata;
+	}
+
+	u3d = kzalloc(sizeof(*u3d), GFP_KERNEL);
+	if (!u3d) {
+		retval = -ENOMEM;
+		goto err_alloc_private;
+	}
+
+	spin_lock_init(&u3d->lock);
+
+	platform_set_drvdata(dev, u3d);
+
+	u3d->dev = &dev->dev;
+	u3d->vbus = pdata->vbus;
+
+	u3d->clk = clk_get(&dev->dev, NULL);
+	if (IS_ERR(u3d->clk)) {
+		retval = PTR_ERR(u3d->clk);
+		goto err_get_clk;
+	}
+
+	r = platform_get_resource_byname(dev, IORESOURCE_MEM, "capregs");
+	if (!r) {
+		dev_err(&dev->dev, "no I/O memory resource defined\n");
+		retval = -ENODEV;
+		goto err_get_cap_regs;
+	}
+
+	u3d->cap_regs = (struct mv_u3d_cap_regs __iomem *)
+		ioremap(r->start, resource_size(r));
+	if (!u3d->cap_regs) {
+		dev_err(&dev->dev, "failed to map I/O memory\n");
+		retval = -EBUSY;
+		goto err_map_cap_regs;
+	} else {
+		dev_dbg(&dev->dev, "cap_regs address: 0x%lx/0x%lx\n",
+			(unsigned long) r->start,
+			(unsigned long) u3d->cap_regs);
+	}
+
+	/* we will access controller register, so enable the u3d controller */
+	retval = clk_enable(u3d->clk);
+	if (retval) {
+		dev_err(&dev->dev, "clk_enable error %d\n", retval);
+		goto err_u3d_enable;
+	}
+
+	if (pdata->phy_init) {
+		retval = pdata->phy_init(u3d->phy_regs);
+		if (retval) {
+			dev_err(&dev->dev, "init phy error %d\n", retval);
+			clk_disable(u3d->clk);
+			goto err_phy_init;
+		}
+	}
+
+	u3d->op_regs = (struct mv_u3d_op_regs __iomem *)(u3d->cap_regs
+		+ MV_U3D_USB3_OP_REGS_OFFSET);
+
+	u3d->vuc_regs = (struct mv_u3d_vuc_regs __iomem *)(u3d->cap_regs
+		+ ioread32(&u3d->cap_regs->vuoff));
+
+	u3d->max_eps = 16;
+
+	/*
+	 * some platform will use usb to download image, it may not disconnect
+	 * usb gadget before loading kernel. So first stop u3d here.
+	 */
+	mv_u3d_controller_stop(u3d);
+	iowrite32(0xFFFFFFFF, &u3d->vuc_regs->intrcause);
+
+	if (pdata->phy_deinit)
+		pdata->phy_deinit(u3d->phy_regs);
+	clk_disable(u3d->clk);
+
+	size = u3d->max_eps * sizeof(struct mv_u3d_ep_context) * 2;
+	size = (size + MV_U3D_EP_CONTEXT_ALIGNMENT - 1)
+		& ~(MV_U3D_EP_CONTEXT_ALIGNMENT - 1);
+	u3d->ep_context = dma_alloc_coherent(&dev->dev, size,
+					&u3d->ep_context_dma, GFP_KERNEL);
+	if (!u3d->ep_context) {
+		dev_err(&dev->dev, "allocate ep context memory failed\n");
+		retval = -ENOMEM;
+		goto err_alloc_ep_context;
+	}
+	u3d->ep_context_size = size;
+
+	/* create TRB dma_pool resource */
+	u3d->trb_pool = dma_pool_create("u3d_trb",
+			&dev->dev,
+			sizeof(struct mv_u3d_trb_hw),
+			MV_U3D_TRB_ALIGNMENT,
+			MV_U3D_DMA_BOUNDARY);
+
+	if (!u3d->trb_pool) {
+		retval = -ENOMEM;
+		goto err_alloc_trb_pool;
+	}
+
+	size = u3d->max_eps * sizeof(struct mv_u3d_ep) * 2;
+	u3d->eps = kzalloc(size, GFP_KERNEL);
+	if (!u3d->eps) {
+		retval = -ENOMEM;
+		goto err_alloc_eps;
+	}
+
+	/* initialize ep0 status request structure */
+	u3d->status_req = kzalloc(sizeof(struct mv_u3d_req) + 8, GFP_KERNEL);
+	if (!u3d->status_req) {
+		retval = -ENOMEM;
+		goto err_alloc_status_req;
+	}
+	INIT_LIST_HEAD(&u3d->status_req->queue);
+
+	/* allocate a small amount of memory to get valid address */
+	u3d->status_req->req.buf = (char *)u3d->status_req
+					+ sizeof(struct mv_u3d_req);
+	u3d->status_req->req.dma = virt_to_phys(u3d->status_req->req.buf);
+
+	u3d->resume_state = USB_STATE_NOTATTACHED;
+	u3d->usb_state = USB_STATE_ATTACHED;
+	u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
+	u3d->remote_wakeup = 0;
+
+	r = platform_get_resource(dev, IORESOURCE_IRQ, 0);
+	if (!r) {
+		dev_err(&dev->dev, "no IRQ resource defined\n");
+		retval = -ENODEV;
+		goto err_get_irq;
+	}
+	u3d->irq = r->start;
+
+	/* initialize gadget structure */
+	u3d->gadget.ops = &mv_u3d_ops;	/* usb_gadget_ops */
+	u3d->gadget.ep0 = &u3d->eps[1].ep;	/* gadget ep0 */
+	INIT_LIST_HEAD(&u3d->gadget.ep_list);	/* ep_list */
+	u3d->gadget.speed = USB_SPEED_UNKNOWN;	/* speed */
+
+	/* the "gadget" abstracts/virtualizes the controller */
+	u3d->gadget.name = driver_name;		/* gadget name */
+
+	mv_u3d_eps_init(u3d);
+
+	if (request_irq(u3d->irq, mv_u3d_irq,
+		IRQF_SHARED, driver_name, u3d)) {
+		u3d->irq = 0;
+		dev_err(&dev->dev, "Request irq %d for u3d failed\n",
+			u3d->irq);
+		retval = -ENODEV;
+		goto err_request_irq;
+	}
+
+	/* external vbus detection */
+	if (u3d->vbus) {
+		u3d->clock_gating = 1;
+		dev_err(&dev->dev, "external vbus detection\n");
+	}
+
+	if (!u3d->clock_gating)
+		u3d->vbus_active = 1;
+
+	/* enable usb3 controller vbus detection */
+	u3d->vbus_valid_detect = 1;
+
+	retval = usb_add_gadget_udc(&dev->dev, &u3d->gadget);
+	if (retval)
+		goto err_unregister;
+
+	dev_dbg(&dev->dev, "successful probe usb3 device %s clock gating.\n",
+		u3d->clock_gating ? "with" : "without");
+
+	return 0;
+
+err_unregister:
+	free_irq(u3d->irq, u3d);
+err_get_irq:
+err_request_irq:
+	kfree(u3d->status_req);
+err_alloc_status_req:
+	kfree(u3d->eps);
+err_alloc_eps:
+	dma_pool_destroy(u3d->trb_pool);
+err_alloc_trb_pool:
+	dma_free_coherent(&dev->dev, u3d->ep_context_size,
+		u3d->ep_context, u3d->ep_context_dma);
+err_alloc_ep_context:
+err_phy_init:
+err_u3d_enable:
+	iounmap(u3d->cap_regs);
+err_map_cap_regs:
+err_get_cap_regs:
+	clk_put(u3d->clk);
+err_get_clk:
+	kfree(u3d);
+err_alloc_private:
+err_pdata:
+	return retval;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mv_u3d_suspend(struct device *dev)
+{
+	struct mv_u3d *u3d = dev_get_drvdata(dev);
+
+	/*
+	 * only cable is unplugged, usb can suspend.
+	 * So do not care about clock_gating == 1, it is handled by
+	 * vbus session.
+	 */
+	if (!u3d->clock_gating) {
+		mv_u3d_controller_stop(u3d);
+
+		spin_lock_irq(&u3d->lock);
+		/* stop all usb activities */
+		mv_u3d_stop_activity(u3d, u3d->driver);
+		spin_unlock_irq(&u3d->lock);
+
+		mv_u3d_disable(u3d);
+	}
+
+	return 0;
+}
+
+static int mv_u3d_resume(struct device *dev)
+{
+	struct mv_u3d *u3d = dev_get_drvdata(dev);
+	int retval;
+
+	if (!u3d->clock_gating) {
+		retval = mv_u3d_enable(u3d);
+		if (retval)
+			return retval;
+
+		if (u3d->driver && u3d->softconnect) {
+			mv_u3d_controller_reset(u3d);
+			mv_u3d_ep0_reset(u3d);
+			mv_u3d_controller_start(u3d);
+		}
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(mv_u3d_pm_ops, mv_u3d_suspend, mv_u3d_resume);
+
+static void mv_u3d_shutdown(struct platform_device *dev)
+{
+	struct mv_u3d *u3d = platform_get_drvdata(dev);
+	u32 tmp;
+
+	tmp = ioread32(&u3d->op_regs->usbcmd);
+	tmp &= ~MV_U3D_CMD_RUN_STOP;
+	iowrite32(tmp, &u3d->op_regs->usbcmd);
+}
+
+static struct platform_driver mv_u3d_driver = {
+	.probe		= mv_u3d_probe,
+	.remove		= mv_u3d_remove,
+	.shutdown	= mv_u3d_shutdown,
+	.driver		= {
+		.name	= "mv-u3d",
+		.pm	= &mv_u3d_pm_ops,
+	},
+};
+
+module_platform_driver(mv_u3d_driver);
+MODULE_ALIAS("platform:mv-u3d");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Yu Xu <yuxu@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/udc/mv_udc.h b/drivers/usb/gadget/udc/mv_udc.h
new file mode 100644
index 000000000..b3f759c09
--- /dev/null
+++ b/drivers/usb/gadget/udc/mv_udc.h
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ */
+
+#ifndef __MV_UDC_H
+#define __MV_UDC_H
+
+#define VUSBHS_MAX_PORTS	8
+
+#define DQH_ALIGNMENT		2048
+#define DTD_ALIGNMENT		64
+#define DMA_BOUNDARY		4096
+
+#define EP_DIR_IN	1
+#define EP_DIR_OUT	0
+
+#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+#define EP0_MAX_PKT_SIZE	64
+/* ep0 transfer state */
+#define WAIT_FOR_SETUP		0
+#define DATA_STATE_XMIT		1
+#define DATA_STATE_NEED_ZLP	2
+#define WAIT_FOR_OUT_STATUS	3
+#define DATA_STATE_RECV		4
+
+#define CAPLENGTH_MASK		(0xff)
+#define DCCPARAMS_DEN_MASK	(0x1f)
+
+#define HCSPARAMS_PPC		(0x10)
+
+/* Frame Index Register Bit Masks */
+#define USB_FRINDEX_MASKS	0x3fff
+
+/* Command Register Bit Masks */
+#define USBCMD_RUN_STOP				(0x00000001)
+#define USBCMD_CTRL_RESET			(0x00000002)
+#define USBCMD_SETUP_TRIPWIRE_SET		(0x00002000)
+#define USBCMD_SETUP_TRIPWIRE_CLEAR		(~USBCMD_SETUP_TRIPWIRE_SET)
+
+#define USBCMD_ATDTW_TRIPWIRE_SET		(0x00004000)
+#define USBCMD_ATDTW_TRIPWIRE_CLEAR		(~USBCMD_ATDTW_TRIPWIRE_SET)
+
+/* bit 15,3,2 are for frame list size */
+#define USBCMD_FRAME_SIZE_1024			(0x00000000) /* 000 */
+#define USBCMD_FRAME_SIZE_512			(0x00000004) /* 001 */
+#define USBCMD_FRAME_SIZE_256			(0x00000008) /* 010 */
+#define USBCMD_FRAME_SIZE_128			(0x0000000C) /* 011 */
+#define USBCMD_FRAME_SIZE_64			(0x00008000) /* 100 */
+#define USBCMD_FRAME_SIZE_32			(0x00008004) /* 101 */
+#define USBCMD_FRAME_SIZE_16			(0x00008008) /* 110 */
+#define USBCMD_FRAME_SIZE_8			(0x0000800C) /* 111 */
+
+#define EPCTRL_TX_ALL_MASK			(0xFFFF0000)
+#define EPCTRL_RX_ALL_MASK			(0x0000FFFF)
+
+#define EPCTRL_TX_DATA_TOGGLE_RST		(0x00400000)
+#define EPCTRL_TX_EP_STALL			(0x00010000)
+#define EPCTRL_RX_EP_STALL			(0x00000001)
+#define EPCTRL_RX_DATA_TOGGLE_RST		(0x00000040)
+#define EPCTRL_RX_ENABLE			(0x00000080)
+#define EPCTRL_TX_ENABLE			(0x00800000)
+#define EPCTRL_CONTROL				(0x00000000)
+#define EPCTRL_ISOCHRONOUS			(0x00040000)
+#define EPCTRL_BULK				(0x00080000)
+#define EPCTRL_INT				(0x000C0000)
+#define EPCTRL_TX_TYPE				(0x000C0000)
+#define EPCTRL_RX_TYPE				(0x0000000C)
+#define EPCTRL_DATA_TOGGLE_INHIBIT		(0x00000020)
+#define EPCTRL_TX_EP_TYPE_SHIFT			(18)
+#define EPCTRL_RX_EP_TYPE_SHIFT			(2)
+
+#define EPCOMPLETE_MAX_ENDPOINTS		(16)
+
+/* endpoint list address bit masks */
+#define USB_EP_LIST_ADDRESS_MASK              0xfffff800
+
+#define PORTSCX_W1C_BITS			0x2a
+#define PORTSCX_PORT_RESET			0x00000100
+#define PORTSCX_PORT_POWER			0x00001000
+#define PORTSCX_FORCE_FULL_SPEED_CONNECT	0x01000000
+#define PORTSCX_PAR_XCVR_SELECT			0xC0000000
+#define PORTSCX_PORT_FORCE_RESUME		0x00000040
+#define PORTSCX_PORT_SUSPEND			0x00000080
+#define PORTSCX_PORT_SPEED_FULL			0x00000000
+#define PORTSCX_PORT_SPEED_LOW			0x04000000
+#define PORTSCX_PORT_SPEED_HIGH			0x08000000
+#define PORTSCX_PORT_SPEED_MASK			0x0C000000
+
+/* USB MODE Register Bit Masks */
+#define USBMODE_CTRL_MODE_IDLE			0x00000000
+#define USBMODE_CTRL_MODE_DEVICE		0x00000002
+#define USBMODE_CTRL_MODE_HOST			0x00000003
+#define USBMODE_CTRL_MODE_RSV			0x00000001
+#define USBMODE_SETUP_LOCK_OFF			0x00000008
+#define USBMODE_STREAM_DISABLE			0x00000010
+
+/* USB STS Register Bit Masks */
+#define USBSTS_INT			0x00000001
+#define USBSTS_ERR			0x00000002
+#define USBSTS_PORT_CHANGE		0x00000004
+#define USBSTS_FRM_LST_ROLL		0x00000008
+#define USBSTS_SYS_ERR			0x00000010
+#define USBSTS_IAA			0x00000020
+#define USBSTS_RESET			0x00000040
+#define USBSTS_SOF			0x00000080
+#define USBSTS_SUSPEND			0x00000100
+#define USBSTS_HC_HALTED		0x00001000
+#define USBSTS_RCL			0x00002000
+#define USBSTS_PERIODIC_SCHEDULE	0x00004000
+#define USBSTS_ASYNC_SCHEDULE		0x00008000
+
+
+/* Interrupt Enable Register Bit Masks */
+#define USBINTR_INT_EN                          (0x00000001)
+#define USBINTR_ERR_INT_EN                      (0x00000002)
+#define USBINTR_PORT_CHANGE_DETECT_EN           (0x00000004)
+
+#define USBINTR_ASYNC_ADV_AAE                   (0x00000020)
+#define USBINTR_ASYNC_ADV_AAE_ENABLE            (0x00000020)
+#define USBINTR_ASYNC_ADV_AAE_DISABLE           (0xFFFFFFDF)
+
+#define USBINTR_RESET_EN                        (0x00000040)
+#define USBINTR_SOF_UFRAME_EN                   (0x00000080)
+#define USBINTR_DEVICE_SUSPEND                  (0x00000100)
+
+#define USB_DEVICE_ADDRESS_MASK			(0xfe000000)
+#define USB_DEVICE_ADDRESS_BIT_SHIFT		(25)
+
+struct mv_cap_regs {
+	u32	caplength_hciversion;
+	u32	hcsparams;	/* HC structural parameters */
+	u32	hccparams;	/* HC Capability Parameters*/
+	u32	reserved[5];
+	u32	dciversion;	/* DC version number and reserved 16 bits */
+	u32	dccparams;	/* DC Capability Parameters */
+};
+
+struct mv_op_regs {
+	u32	usbcmd;		/* Command register */
+	u32	usbsts;		/* Status register */
+	u32	usbintr;	/* Interrupt enable */
+	u32	frindex;	/* Frame index */
+	u32	reserved1[1];
+	u32	deviceaddr;	/* Device Address */
+	u32	eplistaddr;	/* Endpoint List Address */
+	u32	ttctrl;		/* HOST TT status and control */
+	u32	burstsize;	/* Programmable Burst Size */
+	u32	txfilltuning;	/* Host Transmit Pre-Buffer Packet Tuning */
+	u32	reserved[4];
+	u32	epnak;		/* Endpoint NAK */
+	u32	epnaken;	/* Endpoint NAK Enable */
+	u32	configflag;	/* Configured Flag register */
+	u32	portsc[VUSBHS_MAX_PORTS]; /* Port Status/Control x, x = 1..8 */
+	u32	otgsc;
+	u32	usbmode;	/* USB Host/Device mode */
+	u32	epsetupstat;	/* Endpoint Setup Status */
+	u32	epprime;	/* Endpoint Initialize */
+	u32	epflush;	/* Endpoint De-initialize */
+	u32	epstatus;	/* Endpoint Status */
+	u32	epcomplete;	/* Endpoint Interrupt On Complete */
+	u32	epctrlx[16];	/* Endpoint Control, where x = 0.. 15 */
+	u32	mcr;		/* Mux Control */
+	u32	isr;		/* Interrupt Status */
+	u32	ier;		/* Interrupt Enable */
+};
+
+struct mv_udc {
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	spinlock_t			lock;
+	struct completion		*done;
+	struct platform_device		*dev;
+	int				irq;
+
+	struct mv_cap_regs __iomem	*cap_regs;
+	struct mv_op_regs __iomem	*op_regs;
+	void __iomem                    *phy_regs;
+	unsigned int			max_eps;
+	struct mv_dqh			*ep_dqh;
+	size_t				ep_dqh_size;
+	dma_addr_t			ep_dqh_dma;
+
+	struct dma_pool			*dtd_pool;
+	struct mv_ep			*eps;
+
+	struct mv_dtd			*dtd_head;
+	struct mv_dtd			*dtd_tail;
+	unsigned int			dtd_entries;
+
+	struct mv_req			*status_req;
+	struct usb_ctrlrequest		local_setup_buff;
+
+	unsigned int		resume_state;	/* USB state to resume */
+	unsigned int		usb_state;	/* USB current state */
+	unsigned int		ep0_state;	/* Endpoint zero state */
+	unsigned int		ep0_dir;
+
+	unsigned int		dev_addr;
+	unsigned int		test_mode;
+
+	int			errors;
+	unsigned		softconnect:1,
+				vbus_active:1,
+				remote_wakeup:1,
+				softconnected:1,
+				force_fs:1,
+				clock_gating:1,
+				active:1,
+				stopped:1;      /* stop bit is setted */
+
+	struct work_struct	vbus_work;
+	struct workqueue_struct *qwork;
+
+	struct usb_phy		*transceiver;
+
+	struct mv_usb_platform_data     *pdata;
+
+	/* some SOC has mutiple clock sources for USB*/
+	struct clk      *clk;
+};
+
+/* endpoint data structure */
+struct mv_ep {
+	struct usb_ep		ep;
+	struct mv_udc		*udc;
+	struct list_head	queue;
+	struct mv_dqh		*dqh;
+	u32			direction;
+	char			name[14];
+	unsigned		stopped:1,
+				wedge:1,
+				ep_type:2,
+				ep_num:8;
+};
+
+/* request data structure */
+struct mv_req {
+	struct usb_request	req;
+	struct mv_dtd		*dtd, *head, *tail;
+	struct mv_ep		*ep;
+	struct list_head	queue;
+	unsigned int            test_mode;
+	unsigned		dtd_count;
+	unsigned		mapped:1;
+};
+
+#define EP_QUEUE_HEAD_MULT_POS			30
+#define EP_QUEUE_HEAD_ZLT_SEL			0x20000000
+#define EP_QUEUE_HEAD_MAX_PKT_LEN_POS		16
+#define EP_QUEUE_HEAD_MAX_PKT_LEN(ep_info)	(((ep_info)>>16)&0x07ff)
+#define EP_QUEUE_HEAD_IOS			0x00008000
+#define EP_QUEUE_HEAD_NEXT_TERMINATE		0x00000001
+#define EP_QUEUE_HEAD_IOC			0x00008000
+#define EP_QUEUE_HEAD_MULTO			0x00000C00
+#define EP_QUEUE_HEAD_STATUS_HALT		0x00000040
+#define EP_QUEUE_HEAD_STATUS_ACTIVE		0x00000080
+#define EP_QUEUE_CURRENT_OFFSET_MASK		0x00000FFF
+#define EP_QUEUE_HEAD_NEXT_POINTER_MASK		0xFFFFFFE0
+#define EP_QUEUE_FRINDEX_MASK			0x000007FF
+#define EP_MAX_LENGTH_TRANSFER			0x4000
+
+struct mv_dqh {
+	/* Bits 16..26 Bit 15 is Interrupt On Setup */
+	u32	max_packet_length;
+	u32	curr_dtd_ptr;		/* Current dTD Pointer */
+	u32	next_dtd_ptr;		/* Next dTD Pointer */
+	/* Total bytes (16..30), IOC (15), INT (8), STS (0-7) */
+	u32	size_ioc_int_sts;
+	u32	buff_ptr0;		/* Buffer pointer Page 0 (12-31) */
+	u32	buff_ptr1;		/* Buffer pointer Page 1 (12-31) */
+	u32	buff_ptr2;		/* Buffer pointer Page 2 (12-31) */
+	u32	buff_ptr3;		/* Buffer pointer Page 3 (12-31) */
+	u32	buff_ptr4;		/* Buffer pointer Page 4 (12-31) */
+	u32	reserved1;
+	/* 8 bytes of setup data that follows the Setup PID */
+	u8	setup_buffer[8];
+	u32	reserved2[4];
+};
+
+
+#define DTD_NEXT_TERMINATE		(0x00000001)
+#define DTD_IOC				(0x00008000)
+#define DTD_STATUS_ACTIVE		(0x00000080)
+#define DTD_STATUS_HALTED		(0x00000040)
+#define DTD_STATUS_DATA_BUFF_ERR	(0x00000020)
+#define DTD_STATUS_TRANSACTION_ERR	(0x00000008)
+#define DTD_RESERVED_FIELDS		(0x00007F00)
+#define DTD_ERROR_MASK			(0x68)
+#define DTD_ADDR_MASK			(0xFFFFFFE0)
+#define DTD_PACKET_SIZE			0x7FFF0000
+#define DTD_LENGTH_BIT_POS		(16)
+
+struct mv_dtd {
+	u32	dtd_next;
+	u32	size_ioc_sts;
+	u32	buff_ptr0;		/* Buffer pointer Page 0 */
+	u32	buff_ptr1;		/* Buffer pointer Page 1 */
+	u32	buff_ptr2;		/* Buffer pointer Page 2 */
+	u32	buff_ptr3;		/* Buffer pointer Page 3 */
+	u32	buff_ptr4;		/* Buffer pointer Page 4 */
+	u32	scratch_ptr;
+	/* 32 bytes */
+	dma_addr_t td_dma;		/* dma address for this td */
+	struct mv_dtd *next_dtd_virt;
+};
+
+#endif
diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c
new file mode 100644
index 000000000..b397f3a84
--- /dev/null
+++ b/drivers/usb/gadget/udc/mv_udc_core.c
@@ -0,0 +1,2424 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ * Author: Chao Xie <chao.xie@marvell.com>
+ *	   Neil Zhang <zhangwm@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/platform_data/mv_usb.h>
+#include <asm/unaligned.h>
+
+#include "mv_udc.h"
+
+#define DRIVER_DESC		"Marvell PXA USB Device Controller driver"
+
+#define ep_dir(ep)	(((ep)->ep_num == 0) ? \
+				((ep)->udc->ep0_dir) : ((ep)->direction))
+
+/* timeout value -- usec */
+#define RESET_TIMEOUT		10000
+#define FLUSH_TIMEOUT		10000
+#define EPSTATUS_TIMEOUT	10000
+#define PRIME_TIMEOUT		10000
+#define READSAFE_TIMEOUT	1000
+
+#define LOOPS_USEC_SHIFT	1
+#define LOOPS_USEC		(1 << LOOPS_USEC_SHIFT)
+#define LOOPS(timeout)		((timeout) >> LOOPS_USEC_SHIFT)
+
+static DECLARE_COMPLETION(release_done);
+
+static const char driver_name[] = "mv_udc";
+
+static void nuke(struct mv_ep *ep, int status);
+static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver);
+
+/* for endpoint 0 operations */
+static const struct usb_endpoint_descriptor mv_ep0_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	0,
+	.bmAttributes =		USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize =	EP0_MAX_PKT_SIZE,
+};
+
+static void ep0_reset(struct mv_udc *udc)
+{
+	struct mv_ep *ep;
+	u32 epctrlx;
+	int i = 0;
+
+	/* ep0 in and out */
+	for (i = 0; i < 2; i++) {
+		ep = &udc->eps[i];
+		ep->udc = udc;
+
+		/* ep0 dQH */
+		ep->dqh = &udc->ep_dqh[i];
+
+		/* configure ep0 endpoint capabilities in dQH */
+		ep->dqh->max_packet_length =
+			(EP0_MAX_PKT_SIZE << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
+			| EP_QUEUE_HEAD_IOS;
+
+		ep->dqh->next_dtd_ptr = EP_QUEUE_HEAD_NEXT_TERMINATE;
+
+		epctrlx = readl(&udc->op_regs->epctrlx[0]);
+		if (i) {	/* TX */
+			epctrlx |= EPCTRL_TX_ENABLE
+				| (USB_ENDPOINT_XFER_CONTROL
+					<< EPCTRL_TX_EP_TYPE_SHIFT);
+
+		} else {	/* RX */
+			epctrlx |= EPCTRL_RX_ENABLE
+				| (USB_ENDPOINT_XFER_CONTROL
+					<< EPCTRL_RX_EP_TYPE_SHIFT);
+		}
+
+		writel(epctrlx, &udc->op_regs->epctrlx[0]);
+	}
+}
+
+/* protocol ep0 stall, will automatically be cleared on new transaction */
+static void ep0_stall(struct mv_udc *udc)
+{
+	u32	epctrlx;
+
+	/* set TX and RX to stall */
+	epctrlx = readl(&udc->op_regs->epctrlx[0]);
+	epctrlx |= EPCTRL_RX_EP_STALL | EPCTRL_TX_EP_STALL;
+	writel(epctrlx, &udc->op_regs->epctrlx[0]);
+
+	/* update ep0 state */
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->ep0_dir = EP_DIR_OUT;
+}
+
+static int process_ep_req(struct mv_udc *udc, int index,
+	struct mv_req *curr_req)
+{
+	struct mv_dtd	*curr_dtd;
+	struct mv_dqh	*curr_dqh;
+	int actual, remaining_length;
+	int i, direction;
+	int retval = 0;
+	u32 errors;
+	u32 bit_pos;
+
+	curr_dqh = &udc->ep_dqh[index];
+	direction = index % 2;
+
+	curr_dtd = curr_req->head;
+	actual = curr_req->req.length;
+
+	for (i = 0; i < curr_req->dtd_count; i++) {
+		if (curr_dtd->size_ioc_sts & DTD_STATUS_ACTIVE) {
+			dev_dbg(&udc->dev->dev, "%s, dTD not completed\n",
+				udc->eps[index].name);
+			return 1;
+		}
+
+		errors = curr_dtd->size_ioc_sts & DTD_ERROR_MASK;
+		if (!errors) {
+			remaining_length =
+				(curr_dtd->size_ioc_sts	& DTD_PACKET_SIZE)
+					>> DTD_LENGTH_BIT_POS;
+			actual -= remaining_length;
+
+			if (remaining_length) {
+				if (direction) {
+					dev_dbg(&udc->dev->dev,
+						"TX dTD remains data\n");
+					retval = -EPROTO;
+					break;
+				} else
+					break;
+			}
+		} else {
+			dev_info(&udc->dev->dev,
+				"complete_tr error: ep=%d %s: error = 0x%x\n",
+				index >> 1, direction ? "SEND" : "RECV",
+				errors);
+			if (errors & DTD_STATUS_HALTED) {
+				/* Clear the errors and Halt condition */
+				curr_dqh->size_ioc_int_sts &= ~errors;
+				retval = -EPIPE;
+			} else if (errors & DTD_STATUS_DATA_BUFF_ERR) {
+				retval = -EPROTO;
+			} else if (errors & DTD_STATUS_TRANSACTION_ERR) {
+				retval = -EILSEQ;
+			}
+		}
+		if (i != curr_req->dtd_count - 1)
+			curr_dtd = (struct mv_dtd *)curr_dtd->next_dtd_virt;
+	}
+	if (retval)
+		return retval;
+
+	if (direction == EP_DIR_OUT)
+		bit_pos = 1 << curr_req->ep->ep_num;
+	else
+		bit_pos = 1 << (16 + curr_req->ep->ep_num);
+
+	while (curr_dqh->curr_dtd_ptr == curr_dtd->td_dma) {
+		if (curr_dtd->dtd_next == EP_QUEUE_HEAD_NEXT_TERMINATE) {
+			while (readl(&udc->op_regs->epstatus) & bit_pos)
+				udelay(1);
+			break;
+		}
+		udelay(1);
+	}
+
+	curr_req->req.actual = actual;
+
+	return 0;
+}
+
+/*
+ * done() - retire a request; caller blocked irqs
+ * @status : request status to be set, only works when
+ * request is still in progress.
+ */
+static void done(struct mv_ep *ep, struct mv_req *req, int status)
+	__releases(&ep->udc->lock)
+	__acquires(&ep->udc->lock)
+{
+	struct mv_udc *udc = NULL;
+	unsigned char stopped = ep->stopped;
+	struct mv_dtd *curr_td, *next_td;
+	int j;
+
+	udc = (struct mv_udc *)ep->udc;
+	/* Removed the req from fsl_ep->queue */
+	list_del_init(&req->queue);
+
+	/* req.status should be set as -EINPROGRESS in ep_queue() */
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	/* Free dtd for the request */
+	next_td = req->head;
+	for (j = 0; j < req->dtd_count; j++) {
+		curr_td = next_td;
+		if (j != req->dtd_count - 1)
+			next_td = curr_td->next_dtd_virt;
+		dma_pool_free(udc->dtd_pool, curr_td, curr_td->td_dma);
+	}
+
+	usb_gadget_unmap_request(&udc->gadget, &req->req, ep_dir(ep));
+
+	if (status && (status != -ESHUTDOWN))
+		dev_info(&udc->dev->dev, "complete %s req %p stat %d len %u/%u",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length);
+
+	ep->stopped = 1;
+
+	spin_unlock(&ep->udc->lock);
+
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+
+	spin_lock(&ep->udc->lock);
+	ep->stopped = stopped;
+}
+
+static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
+{
+	struct mv_udc *udc;
+	struct mv_dqh *dqh;
+	u32 bit_pos, direction;
+	u32 usbcmd, epstatus;
+	unsigned int loops;
+	int retval = 0;
+
+	udc = ep->udc;
+	direction = ep_dir(ep);
+	dqh = &(udc->ep_dqh[ep->ep_num * 2 + direction]);
+	bit_pos = 1 << (((direction == EP_DIR_OUT) ? 0 : 16) + ep->ep_num);
+
+	/* check if the pipe is empty */
+	if (!(list_empty(&ep->queue))) {
+		struct mv_req *lastreq;
+		lastreq = list_entry(ep->queue.prev, struct mv_req, queue);
+		lastreq->tail->dtd_next =
+			req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
+
+		wmb();
+
+		if (readl(&udc->op_regs->epprime) & bit_pos)
+			goto done;
+
+		loops = LOOPS(READSAFE_TIMEOUT);
+		while (1) {
+			/* start with setting the semaphores */
+			usbcmd = readl(&udc->op_regs->usbcmd);
+			usbcmd |= USBCMD_ATDTW_TRIPWIRE_SET;
+			writel(usbcmd, &udc->op_regs->usbcmd);
+
+			/* read the endpoint status */
+			epstatus = readl(&udc->op_regs->epstatus) & bit_pos;
+
+			/*
+			 * Reread the ATDTW semaphore bit to check if it is
+			 * cleared. When hardware see a hazard, it will clear
+			 * the bit or else we remain set to 1 and we can
+			 * proceed with priming of endpoint if not already
+			 * primed.
+			 */
+			if (readl(&udc->op_regs->usbcmd)
+				& USBCMD_ATDTW_TRIPWIRE_SET)
+				break;
+
+			loops--;
+			if (loops == 0) {
+				dev_err(&udc->dev->dev,
+					"Timeout for ATDTW_TRIPWIRE...\n");
+				retval = -ETIME;
+				goto done;
+			}
+			udelay(LOOPS_USEC);
+		}
+
+		/* Clear the semaphore */
+		usbcmd = readl(&udc->op_regs->usbcmd);
+		usbcmd &= USBCMD_ATDTW_TRIPWIRE_CLEAR;
+		writel(usbcmd, &udc->op_regs->usbcmd);
+
+		if (epstatus)
+			goto done;
+	}
+
+	/* Write dQH next pointer and terminate bit to 0 */
+	dqh->next_dtd_ptr = req->head->td_dma
+				& EP_QUEUE_HEAD_NEXT_POINTER_MASK;
+
+	/* clear active and halt bit, in case set from a previous error */
+	dqh->size_ioc_int_sts &= ~(DTD_STATUS_ACTIVE | DTD_STATUS_HALTED);
+
+	/* Ensure that updates to the QH will occur before priming. */
+	wmb();
+
+	/* Prime the Endpoint */
+	writel(bit_pos, &udc->op_regs->epprime);
+
+done:
+	return retval;
+}
+
+static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
+		dma_addr_t *dma, int *is_last)
+{
+	struct mv_dtd *dtd;
+	struct mv_udc *udc;
+	struct mv_dqh *dqh;
+	u32 temp, mult = 0;
+
+	/* how big will this transfer be? */
+	if (usb_endpoint_xfer_isoc(req->ep->ep.desc)) {
+		dqh = req->ep->dqh;
+		mult = (dqh->max_packet_length >> EP_QUEUE_HEAD_MULT_POS)
+				& 0x3;
+		*length = min(req->req.length - req->req.actual,
+				(unsigned)(mult * req->ep->ep.maxpacket));
+	} else
+		*length = min(req->req.length - req->req.actual,
+				(unsigned)EP_MAX_LENGTH_TRANSFER);
+
+	udc = req->ep->udc;
+
+	/*
+	 * Be careful that no _GFP_HIGHMEM is set,
+	 * or we can not use dma_to_virt
+	 */
+	dtd = dma_pool_alloc(udc->dtd_pool, GFP_ATOMIC, dma);
+	if (dtd == NULL)
+		return dtd;
+
+	dtd->td_dma = *dma;
+	/* initialize buffer page pointers */
+	temp = (u32)(req->req.dma + req->req.actual);
+	dtd->buff_ptr0 = cpu_to_le32(temp);
+	temp &= ~0xFFF;
+	dtd->buff_ptr1 = cpu_to_le32(temp + 0x1000);
+	dtd->buff_ptr2 = cpu_to_le32(temp + 0x2000);
+	dtd->buff_ptr3 = cpu_to_le32(temp + 0x3000);
+	dtd->buff_ptr4 = cpu_to_le32(temp + 0x4000);
+
+	req->req.actual += *length;
+
+	/* zlp is needed if req->req.zero is set */
+	if (req->req.zero) {
+		if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
+			*is_last = 1;
+		else
+			*is_last = 0;
+	} else if (req->req.length == req->req.actual)
+		*is_last = 1;
+	else
+		*is_last = 0;
+
+	/* Fill in the transfer size; set active bit */
+	temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE);
+
+	/* Enable interrupt for the last dtd of a request */
+	if (*is_last && !req->req.no_interrupt)
+		temp |= DTD_IOC;
+
+	temp |= mult << 10;
+
+	dtd->size_ioc_sts = temp;
+
+	mb();
+
+	return dtd;
+}
+
+/* generate dTD linked list for a request */
+static int req_to_dtd(struct mv_req *req)
+{
+	unsigned count;
+	int is_last, is_first = 1;
+	struct mv_dtd *dtd, *last_dtd = NULL;
+	dma_addr_t dma;
+
+	do {
+		dtd = build_dtd(req, &count, &dma, &is_last);
+		if (dtd == NULL)
+			return -ENOMEM;
+
+		if (is_first) {
+			is_first = 0;
+			req->head = dtd;
+		} else {
+			last_dtd->dtd_next = dma;
+			last_dtd->next_dtd_virt = dtd;
+		}
+		last_dtd = dtd;
+		req->dtd_count++;
+	} while (!is_last);
+
+	/* set terminate bit to 1 for the last dTD */
+	dtd->dtd_next = DTD_NEXT_TERMINATE;
+
+	req->tail = dtd;
+
+	return 0;
+}
+
+static int mv_ep_enable(struct usb_ep *_ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct mv_udc *udc;
+	struct mv_ep *ep;
+	struct mv_dqh *dqh;
+	u16 max = 0;
+	u32 bit_pos, epctrlx, direction;
+	const unsigned char zlt = 1;
+	unsigned char ios, mult;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct mv_ep, ep);
+	udc = ep->udc;
+
+	if (!_ep || !desc
+			|| desc->bDescriptorType != USB_DT_ENDPOINT)
+		return -EINVAL;
+
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	direction = ep_dir(ep);
+	max = usb_endpoint_maxp(desc);
+
+	/*
+	 * disable HW zero length termination select
+	 * driver handles zero length packet through req->req.zero
+	 */
+	bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);
+
+	/* Check if the Endpoint is Primed */
+	if ((readl(&udc->op_regs->epprime) & bit_pos)
+		|| (readl(&udc->op_regs->epstatus) & bit_pos)) {
+		dev_info(&udc->dev->dev,
+			"ep=%d %s: Init ERROR: ENDPTPRIME=0x%x,"
+			" ENDPTSTATUS=0x%x, bit_pos=0x%x\n",
+			(unsigned)ep->ep_num, direction ? "SEND" : "RECV",
+			(unsigned)readl(&udc->op_regs->epprime),
+			(unsigned)readl(&udc->op_regs->epstatus),
+			(unsigned)bit_pos);
+		goto en_done;
+	}
+
+	/* Set the max packet length, interrupt on Setup and Mult fields */
+	ios = 0;
+	mult = 0;
+	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_INT:
+		break;
+	case USB_ENDPOINT_XFER_CONTROL:
+		ios = 1;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		/* Calculate transactions needed for high bandwidth iso */
+		mult = usb_endpoint_maxp_mult(desc);
+		/* 3 transactions at most */
+		if (mult > 3)
+			goto en_done;
+		break;
+	default:
+		goto en_done;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	/* Get the endpoint queue head address */
+	dqh = ep->dqh;
+	dqh->max_packet_length = (max << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
+		| (mult << EP_QUEUE_HEAD_MULT_POS)
+		| (zlt ? EP_QUEUE_HEAD_ZLT_SEL : 0)
+		| (ios ? EP_QUEUE_HEAD_IOS : 0);
+	dqh->next_dtd_ptr = 1;
+	dqh->size_ioc_int_sts = 0;
+
+	ep->ep.maxpacket = max;
+	ep->ep.desc = desc;
+	ep->stopped = 0;
+
+	/* Enable the endpoint for Rx or Tx and set the endpoint type */
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	if (direction == EP_DIR_IN) {
+		epctrlx &= ~EPCTRL_TX_ALL_MASK;
+		epctrlx |= EPCTRL_TX_ENABLE | EPCTRL_TX_DATA_TOGGLE_RST
+			| ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+				<< EPCTRL_TX_EP_TYPE_SHIFT);
+	} else {
+		epctrlx &= ~EPCTRL_RX_ALL_MASK;
+		epctrlx |= EPCTRL_RX_ENABLE | EPCTRL_RX_DATA_TOGGLE_RST
+			| ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+				<< EPCTRL_RX_EP_TYPE_SHIFT);
+	}
+	writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+
+	/*
+	 * Implement Guideline (GL# USB-7) The unused endpoint type must
+	 * be programmed to bulk.
+	 */
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	if ((epctrlx & EPCTRL_RX_ENABLE) == 0) {
+		epctrlx |= (USB_ENDPOINT_XFER_BULK
+				<< EPCTRL_RX_EP_TYPE_SHIFT);
+		writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+	}
+
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	if ((epctrlx & EPCTRL_TX_ENABLE) == 0) {
+		epctrlx |= (USB_ENDPOINT_XFER_BULK
+				<< EPCTRL_TX_EP_TYPE_SHIFT);
+		writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+en_done:
+	return -EINVAL;
+}
+
+static int  mv_ep_disable(struct usb_ep *_ep)
+{
+	struct mv_udc *udc;
+	struct mv_ep *ep;
+	struct mv_dqh *dqh;
+	u32 epctrlx, direction;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct mv_ep, ep);
+	if ((_ep == NULL) || !ep->ep.desc)
+		return -EINVAL;
+
+	udc = ep->udc;
+
+	/* Get the endpoint queue head address */
+	dqh = ep->dqh;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	direction = ep_dir(ep);
+
+	/* Reset the max packet length and the interrupt on Setup */
+	dqh->max_packet_length = 0;
+
+	/* Disable the endpoint for Rx or Tx and reset the endpoint type */
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	epctrlx &= ~((direction == EP_DIR_IN)
+			? (EPCTRL_TX_ENABLE | EPCTRL_TX_TYPE)
+			: (EPCTRL_RX_ENABLE | EPCTRL_RX_TYPE));
+	writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+
+	/* nuke all pending requests (does flush) */
+	nuke(ep, -ESHUTDOWN);
+
+	ep->ep.desc = NULL;
+	ep->stopped = 1;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static struct usb_request *
+mv_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct mv_req *req = NULL;
+
+	req = kzalloc(sizeof *req, gfp_flags);
+	if (!req)
+		return NULL;
+
+	req->req.dma = DMA_ADDR_INVALID;
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void mv_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct mv_req *req = NULL;
+
+	req = container_of(_req, struct mv_req, req);
+
+	if (_req)
+		kfree(req);
+}
+
+static void mv_ep_fifo_flush(struct usb_ep *_ep)
+{
+	struct mv_udc *udc;
+	u32 bit_pos, direction;
+	struct mv_ep *ep;
+	unsigned int loops;
+
+	if (!_ep)
+		return;
+
+	ep = container_of(_ep, struct mv_ep, ep);
+	if (!ep->ep.desc)
+		return;
+
+	udc = ep->udc;
+	direction = ep_dir(ep);
+
+	if (ep->ep_num == 0)
+		bit_pos = (1 << 16) | 1;
+	else if (direction == EP_DIR_OUT)
+		bit_pos = 1 << ep->ep_num;
+	else
+		bit_pos = 1 << (16 + ep->ep_num);
+
+	loops = LOOPS(EPSTATUS_TIMEOUT);
+	do {
+		unsigned int inter_loops;
+
+		if (loops == 0) {
+			dev_err(&udc->dev->dev,
+				"TIMEOUT for ENDPTSTATUS=0x%x, bit_pos=0x%x\n",
+				(unsigned)readl(&udc->op_regs->epstatus),
+				(unsigned)bit_pos);
+			return;
+		}
+		/* Write 1 to the Flush register */
+		writel(bit_pos, &udc->op_regs->epflush);
+
+		/* Wait until flushing completed */
+		inter_loops = LOOPS(FLUSH_TIMEOUT);
+		while (readl(&udc->op_regs->epflush)) {
+			/*
+			 * ENDPTFLUSH bit should be cleared to indicate this
+			 * operation is complete
+			 */
+			if (inter_loops == 0) {
+				dev_err(&udc->dev->dev,
+					"TIMEOUT for ENDPTFLUSH=0x%x,"
+					"bit_pos=0x%x\n",
+					(unsigned)readl(&udc->op_regs->epflush),
+					(unsigned)bit_pos);
+				return;
+			}
+			inter_loops--;
+			udelay(LOOPS_USEC);
+		}
+		loops--;
+	} while (readl(&udc->op_regs->epstatus) & bit_pos);
+}
+
+/* queues (submits) an I/O request to an endpoint */
+static int
+mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct mv_ep *ep = container_of(_ep, struct mv_ep, ep);
+	struct mv_req *req = container_of(_req, struct mv_req, req);
+	struct mv_udc *udc = ep->udc;
+	unsigned long flags;
+	int retval;
+
+	/* catch various bogus parameters */
+	if (!_req || !req->req.complete || !req->req.buf
+			|| !list_empty(&req->queue)) {
+		dev_err(&udc->dev->dev, "%s, bad params", __func__);
+		return -EINVAL;
+	}
+	if (unlikely(!_ep || !ep->ep.desc)) {
+		dev_err(&udc->dev->dev, "%s, bad ep", __func__);
+		return -EINVAL;
+	}
+
+	udc = ep->udc;
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	req->ep = ep;
+
+	/* map virtual address to hardware */
+	retval = usb_gadget_map_request(&udc->gadget, _req, ep_dir(ep));
+	if (retval)
+		return retval;
+
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+	req->dtd_count = 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* build dtds and push them to device queue */
+	if (!req_to_dtd(req)) {
+		retval = queue_dtd(ep, req);
+		if (retval) {
+			spin_unlock_irqrestore(&udc->lock, flags);
+			dev_err(&udc->dev->dev, "Failed to queue dtd\n");
+			goto err_unmap_dma;
+		}
+	} else {
+		spin_unlock_irqrestore(&udc->lock, flags);
+		dev_err(&udc->dev->dev, "Failed to dma_pool_alloc\n");
+		retval = -ENOMEM;
+		goto err_unmap_dma;
+	}
+
+	/* Update ep0 state */
+	if (ep->ep_num == 0)
+		udc->ep0_state = DATA_STATE_XMIT;
+
+	/* irq handler advances the queue */
+	list_add_tail(&req->queue, &ep->queue);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+
+err_unmap_dma:
+	usb_gadget_unmap_request(&udc->gadget, _req, ep_dir(ep));
+
+	return retval;
+}
+
+static void mv_prime_ep(struct mv_ep *ep, struct mv_req *req)
+{
+	struct mv_dqh *dqh = ep->dqh;
+	u32 bit_pos;
+
+	/* Write dQH next pointer and terminate bit to 0 */
+	dqh->next_dtd_ptr = req->head->td_dma
+		& EP_QUEUE_HEAD_NEXT_POINTER_MASK;
+
+	/* clear active and halt bit, in case set from a previous error */
+	dqh->size_ioc_int_sts &= ~(DTD_STATUS_ACTIVE | DTD_STATUS_HALTED);
+
+	/* Ensure that updates to the QH will occure before priming. */
+	wmb();
+
+	bit_pos = 1 << (((ep_dir(ep) == EP_DIR_OUT) ? 0 : 16) + ep->ep_num);
+
+	/* Prime the Endpoint */
+	writel(bit_pos, &ep->udc->op_regs->epprime);
+}
+
+/* dequeues (cancels, unlinks) an I/O request from an endpoint */
+static int mv_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct mv_ep *ep = container_of(_ep, struct mv_ep, ep);
+	struct mv_req *req = NULL, *iter;
+	struct mv_udc *udc = ep->udc;
+	unsigned long flags;
+	int stopped, ret = 0;
+	u32 epctrlx;
+
+	if (!_ep || !_req)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+	stopped = ep->stopped;
+
+	/* Stop the ep before we deal with the queue */
+	ep->stopped = 1;
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	if (ep_dir(ep) == EP_DIR_IN)
+		epctrlx &= ~EPCTRL_TX_ENABLE;
+	else
+		epctrlx &= ~EPCTRL_RX_ENABLE;
+	writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		req = iter;
+		break;
+	}
+	if (!req) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* The request is in progress, or completed but not dequeued */
+	if (ep->queue.next == &req->queue) {
+		_req->status = -ECONNRESET;
+		mv_ep_fifo_flush(_ep);	/* flush current transfer */
+
+		/* The request isn't the last request in this ep queue */
+		if (req->queue.next != &ep->queue) {
+			struct mv_req *next_req;
+
+			next_req = list_entry(req->queue.next,
+				struct mv_req, queue);
+
+			/* Point the QH to the first TD of next request */
+			mv_prime_ep(ep, next_req);
+		} else {
+			struct mv_dqh *qh;
+
+			qh = ep->dqh;
+			qh->next_dtd_ptr = 1;
+			qh->size_ioc_int_sts = 0;
+		}
+
+		/* The request hasn't been processed, patch up the TD chain */
+	} else {
+		struct mv_req *prev_req;
+
+		prev_req = list_entry(req->queue.prev, struct mv_req, queue);
+		writel(readl(&req->tail->dtd_next),
+				&prev_req->tail->dtd_next);
+
+	}
+
+	done(ep, req, -ECONNRESET);
+
+	/* Enable EP */
+out:
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	if (ep_dir(ep) == EP_DIR_IN)
+		epctrlx |= EPCTRL_TX_ENABLE;
+	else
+		epctrlx |= EPCTRL_RX_ENABLE;
+	writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+	ep->stopped = stopped;
+
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+	return ret;
+}
+
+static void ep_set_stall(struct mv_udc *udc, u8 ep_num, u8 direction, int stall)
+{
+	u32 epctrlx;
+
+	epctrlx = readl(&udc->op_regs->epctrlx[ep_num]);
+
+	if (stall) {
+		if (direction == EP_DIR_IN)
+			epctrlx |= EPCTRL_TX_EP_STALL;
+		else
+			epctrlx |= EPCTRL_RX_EP_STALL;
+	} else {
+		if (direction == EP_DIR_IN) {
+			epctrlx &= ~EPCTRL_TX_EP_STALL;
+			epctrlx |= EPCTRL_TX_DATA_TOGGLE_RST;
+		} else {
+			epctrlx &= ~EPCTRL_RX_EP_STALL;
+			epctrlx |= EPCTRL_RX_DATA_TOGGLE_RST;
+		}
+	}
+	writel(epctrlx, &udc->op_regs->epctrlx[ep_num]);
+}
+
+static int ep_is_stall(struct mv_udc *udc, u8 ep_num, u8 direction)
+{
+	u32 epctrlx;
+
+	epctrlx = readl(&udc->op_regs->epctrlx[ep_num]);
+
+	if (direction == EP_DIR_OUT)
+		return (epctrlx & EPCTRL_RX_EP_STALL) ? 1 : 0;
+	else
+		return (epctrlx & EPCTRL_TX_EP_STALL) ? 1 : 0;
+}
+
+static int mv_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge)
+{
+	struct mv_ep *ep;
+	unsigned long flags;
+	int status = 0;
+	struct mv_udc *udc;
+
+	ep = container_of(_ep, struct mv_ep, ep);
+	udc = ep->udc;
+	if (!_ep || !ep->ep.desc) {
+		status = -EINVAL;
+		goto out;
+	}
+
+	if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+		status = -EOPNOTSUPP;
+		goto out;
+	}
+
+	/*
+	 * Attempt to halt IN ep will fail if any transfer requests
+	 * are still queue
+	 */
+	if (halt && (ep_dir(ep) == EP_DIR_IN) && !list_empty(&ep->queue)) {
+		status = -EAGAIN;
+		goto out;
+	}
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+	ep_set_stall(udc, ep->ep_num, ep_dir(ep), halt);
+	if (halt && wedge)
+		ep->wedge = 1;
+	else if (!halt)
+		ep->wedge = 0;
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+
+	if (ep->ep_num == 0) {
+		udc->ep0_state = WAIT_FOR_SETUP;
+		udc->ep0_dir = EP_DIR_OUT;
+	}
+out:
+	return status;
+}
+
+static int mv_ep_set_halt(struct usb_ep *_ep, int halt)
+{
+	return mv_ep_set_halt_wedge(_ep, halt, 0);
+}
+
+static int mv_ep_set_wedge(struct usb_ep *_ep)
+{
+	return mv_ep_set_halt_wedge(_ep, 1, 1);
+}
+
+static const struct usb_ep_ops mv_ep_ops = {
+	.enable		= mv_ep_enable,
+	.disable	= mv_ep_disable,
+
+	.alloc_request	= mv_alloc_request,
+	.free_request	= mv_free_request,
+
+	.queue		= mv_ep_queue,
+	.dequeue	= mv_ep_dequeue,
+
+	.set_wedge	= mv_ep_set_wedge,
+	.set_halt	= mv_ep_set_halt,
+	.fifo_flush	= mv_ep_fifo_flush,	/* flush fifo */
+};
+
+static int udc_clock_enable(struct mv_udc *udc)
+{
+	return clk_prepare_enable(udc->clk);
+}
+
+static void udc_clock_disable(struct mv_udc *udc)
+{
+	clk_disable_unprepare(udc->clk);
+}
+
+static void udc_stop(struct mv_udc *udc)
+{
+	u32 tmp;
+
+	/* Disable interrupts */
+	tmp = readl(&udc->op_regs->usbintr);
+	tmp &= ~(USBINTR_INT_EN | USBINTR_ERR_INT_EN |
+		USBINTR_PORT_CHANGE_DETECT_EN | USBINTR_RESET_EN);
+	writel(tmp, &udc->op_regs->usbintr);
+
+	udc->stopped = 1;
+
+	/* Reset the Run the bit in the command register to stop VUSB */
+	tmp = readl(&udc->op_regs->usbcmd);
+	tmp &= ~USBCMD_RUN_STOP;
+	writel(tmp, &udc->op_regs->usbcmd);
+}
+
+static void udc_start(struct mv_udc *udc)
+{
+	u32 usbintr;
+
+	usbintr = USBINTR_INT_EN | USBINTR_ERR_INT_EN
+		| USBINTR_PORT_CHANGE_DETECT_EN
+		| USBINTR_RESET_EN | USBINTR_DEVICE_SUSPEND;
+	/* Enable interrupts */
+	writel(usbintr, &udc->op_regs->usbintr);
+
+	udc->stopped = 0;
+
+	/* Set the Run bit in the command register */
+	writel(USBCMD_RUN_STOP, &udc->op_regs->usbcmd);
+}
+
+static int udc_reset(struct mv_udc *udc)
+{
+	unsigned int loops;
+	u32 tmp, portsc;
+
+	/* Stop the controller */
+	tmp = readl(&udc->op_regs->usbcmd);
+	tmp &= ~USBCMD_RUN_STOP;
+	writel(tmp, &udc->op_regs->usbcmd);
+
+	/* Reset the controller to get default values */
+	writel(USBCMD_CTRL_RESET, &udc->op_regs->usbcmd);
+
+	/* wait for reset to complete */
+	loops = LOOPS(RESET_TIMEOUT);
+	while (readl(&udc->op_regs->usbcmd) & USBCMD_CTRL_RESET) {
+		if (loops == 0) {
+			dev_err(&udc->dev->dev,
+				"Wait for RESET completed TIMEOUT\n");
+			return -ETIMEDOUT;
+		}
+		loops--;
+		udelay(LOOPS_USEC);
+	}
+
+	/* set controller to device mode */
+	tmp = readl(&udc->op_regs->usbmode);
+	tmp |= USBMODE_CTRL_MODE_DEVICE;
+
+	/* turn setup lockout off, require setup tripwire in usbcmd */
+	tmp |= USBMODE_SETUP_LOCK_OFF;
+
+	writel(tmp, &udc->op_regs->usbmode);
+
+	writel(0x0, &udc->op_regs->epsetupstat);
+
+	/* Configure the Endpoint List Address */
+	writel(udc->ep_dqh_dma & USB_EP_LIST_ADDRESS_MASK,
+		&udc->op_regs->eplistaddr);
+
+	portsc = readl(&udc->op_regs->portsc[0]);
+	if (readl(&udc->cap_regs->hcsparams) & HCSPARAMS_PPC)
+		portsc &= (~PORTSCX_W1C_BITS | ~PORTSCX_PORT_POWER);
+
+	if (udc->force_fs)
+		portsc |= PORTSCX_FORCE_FULL_SPEED_CONNECT;
+	else
+		portsc &= (~PORTSCX_FORCE_FULL_SPEED_CONNECT);
+
+	writel(portsc, &udc->op_regs->portsc[0]);
+
+	tmp = readl(&udc->op_regs->epctrlx[0]);
+	tmp &= ~(EPCTRL_TX_EP_STALL | EPCTRL_RX_EP_STALL);
+	writel(tmp, &udc->op_regs->epctrlx[0]);
+
+	return 0;
+}
+
+static int mv_udc_enable_internal(struct mv_udc *udc)
+{
+	int retval;
+
+	if (udc->active)
+		return 0;
+
+	dev_dbg(&udc->dev->dev, "enable udc\n");
+	retval = udc_clock_enable(udc);
+	if (retval)
+		return retval;
+
+	if (udc->pdata->phy_init) {
+		retval = udc->pdata->phy_init(udc->phy_regs);
+		if (retval) {
+			dev_err(&udc->dev->dev,
+				"init phy error %d\n", retval);
+			udc_clock_disable(udc);
+			return retval;
+		}
+	}
+	udc->active = 1;
+
+	return 0;
+}
+
+static int mv_udc_enable(struct mv_udc *udc)
+{
+	if (udc->clock_gating)
+		return mv_udc_enable_internal(udc);
+
+	return 0;
+}
+
+static void mv_udc_disable_internal(struct mv_udc *udc)
+{
+	if (udc->active) {
+		dev_dbg(&udc->dev->dev, "disable udc\n");
+		if (udc->pdata->phy_deinit)
+			udc->pdata->phy_deinit(udc->phy_regs);
+		udc_clock_disable(udc);
+		udc->active = 0;
+	}
+}
+
+static void mv_udc_disable(struct mv_udc *udc)
+{
+	if (udc->clock_gating)
+		mv_udc_disable_internal(udc);
+}
+
+static int mv_udc_get_frame(struct usb_gadget *gadget)
+{
+	struct mv_udc *udc;
+	u16	retval;
+
+	if (!gadget)
+		return -ENODEV;
+
+	udc = container_of(gadget, struct mv_udc, gadget);
+
+	retval = readl(&udc->op_regs->frindex) & USB_FRINDEX_MASKS;
+
+	return retval;
+}
+
+/* Tries to wake up the host connected to this gadget */
+static int mv_udc_wakeup(struct usb_gadget *gadget)
+{
+	struct mv_udc *udc = container_of(gadget, struct mv_udc, gadget);
+	u32 portsc;
+
+	/* Remote wakeup feature not enabled by host */
+	if (!udc->remote_wakeup)
+		return -ENOTSUPP;
+
+	portsc = readl(&udc->op_regs->portsc);
+	/* not suspended? */
+	if (!(portsc & PORTSCX_PORT_SUSPEND))
+		return 0;
+	/* trigger force resume */
+	portsc |= PORTSCX_PORT_FORCE_RESUME;
+	writel(portsc, &udc->op_regs->portsc[0]);
+	return 0;
+}
+
+static int mv_udc_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct mv_udc *udc;
+	unsigned long flags;
+	int retval = 0;
+
+	udc = container_of(gadget, struct mv_udc, gadget);
+	spin_lock_irqsave(&udc->lock, flags);
+
+	udc->vbus_active = (is_active != 0);
+
+	dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n",
+		__func__, udc->softconnect, udc->vbus_active);
+
+	if (udc->driver && udc->softconnect && udc->vbus_active) {
+		retval = mv_udc_enable(udc);
+		if (retval == 0) {
+			/* Clock is disabled, need re-init registers */
+			udc_reset(udc);
+			ep0_reset(udc);
+			udc_start(udc);
+		}
+	} else if (udc->driver && udc->softconnect) {
+		if (!udc->active)
+			goto out;
+
+		/* stop all the transfer in queue*/
+		stop_activity(udc, udc->driver);
+		udc_stop(udc);
+		mv_udc_disable(udc);
+	}
+
+out:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return retval;
+}
+
+static int mv_udc_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct mv_udc *udc;
+	unsigned long flags;
+	int retval = 0;
+
+	udc = container_of(gadget, struct mv_udc, gadget);
+	spin_lock_irqsave(&udc->lock, flags);
+
+	udc->softconnect = (is_on != 0);
+
+	dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n",
+			__func__, udc->softconnect, udc->vbus_active);
+
+	if (udc->driver && udc->softconnect && udc->vbus_active) {
+		retval = mv_udc_enable(udc);
+		if (retval == 0) {
+			/* Clock is disabled, need re-init registers */
+			udc_reset(udc);
+			ep0_reset(udc);
+			udc_start(udc);
+		}
+	} else if (udc->driver && udc->vbus_active) {
+		/* stop all the transfer in queue*/
+		stop_activity(udc, udc->driver);
+		udc_stop(udc);
+		mv_udc_disable(udc);
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return retval;
+}
+
+static int mv_udc_start(struct usb_gadget *, struct usb_gadget_driver *);
+static int mv_udc_stop(struct usb_gadget *);
+/* device controller usb_gadget_ops structure */
+static const struct usb_gadget_ops mv_ops = {
+
+	/* returns the current frame number */
+	.get_frame	= mv_udc_get_frame,
+
+	/* tries to wake up the host connected to this gadget */
+	.wakeup		= mv_udc_wakeup,
+
+	/* notify controller that VBUS is powered or not */
+	.vbus_session	= mv_udc_vbus_session,
+
+	/* D+ pullup, software-controlled connect/disconnect to USB host */
+	.pullup		= mv_udc_pullup,
+	.udc_start	= mv_udc_start,
+	.udc_stop	= mv_udc_stop,
+};
+
+static int eps_init(struct mv_udc *udc)
+{
+	struct mv_ep	*ep;
+	char name[14];
+	int i;
+
+	/* initialize ep0 */
+	ep = &udc->eps[0];
+	ep->udc = udc;
+	strncpy(ep->name, "ep0", sizeof(ep->name));
+	ep->ep.name = ep->name;
+	ep->ep.ops = &mv_ep_ops;
+	ep->wedge = 0;
+	ep->stopped = 0;
+	usb_ep_set_maxpacket_limit(&ep->ep, EP0_MAX_PKT_SIZE);
+	ep->ep.caps.type_control = true;
+	ep->ep.caps.dir_in = true;
+	ep->ep.caps.dir_out = true;
+	ep->ep_num = 0;
+	ep->ep.desc = &mv_ep0_desc;
+	INIT_LIST_HEAD(&ep->queue);
+
+	ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
+
+	/* initialize other endpoints */
+	for (i = 2; i < udc->max_eps * 2; i++) {
+		ep = &udc->eps[i];
+		if (i % 2) {
+			snprintf(name, sizeof(name), "ep%din", i / 2);
+			ep->direction = EP_DIR_IN;
+			ep->ep.caps.dir_in = true;
+		} else {
+			snprintf(name, sizeof(name), "ep%dout", i / 2);
+			ep->direction = EP_DIR_OUT;
+			ep->ep.caps.dir_out = true;
+		}
+		ep->udc = udc;
+		strncpy(ep->name, name, sizeof(ep->name));
+		ep->ep.name = ep->name;
+
+		ep->ep.caps.type_iso = true;
+		ep->ep.caps.type_bulk = true;
+		ep->ep.caps.type_int = true;
+
+		ep->ep.ops = &mv_ep_ops;
+		ep->stopped = 0;
+		usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
+		ep->ep_num = i / 2;
+
+		INIT_LIST_HEAD(&ep->queue);
+		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+
+		ep->dqh = &udc->ep_dqh[i];
+	}
+
+	return 0;
+}
+
+/* delete all endpoint requests, called with spinlock held */
+static void nuke(struct mv_ep *ep, int status)
+{
+	/* called with spinlock held */
+	ep->stopped = 1;
+
+	/* endpoint fifo flush */
+	mv_ep_fifo_flush(&ep->ep);
+
+	while (!list_empty(&ep->queue)) {
+		struct mv_req *req = NULL;
+		req = list_entry(ep->queue.next, struct mv_req, queue);
+		done(ep, req, status);
+	}
+}
+
+static void gadget_reset(struct mv_udc *udc, struct usb_gadget_driver *driver)
+{
+	struct mv_ep	*ep;
+
+	nuke(&udc->eps[0], -ESHUTDOWN);
+
+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
+		nuke(ep, -ESHUTDOWN);
+	}
+
+	/* report reset; the driver is already quiesced */
+	if (driver) {
+		spin_unlock(&udc->lock);
+		usb_gadget_udc_reset(&udc->gadget, driver);
+		spin_lock(&udc->lock);
+	}
+}
+/* stop all USB activities */
+static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver)
+{
+	struct mv_ep	*ep;
+
+	nuke(&udc->eps[0], -ESHUTDOWN);
+
+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
+		nuke(ep, -ESHUTDOWN);
+	}
+
+	/* report disconnect; the driver is already quiesced */
+	if (driver) {
+		spin_unlock(&udc->lock);
+		driver->disconnect(&udc->gadget);
+		spin_lock(&udc->lock);
+	}
+}
+
+static int mv_udc_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct mv_udc *udc;
+	int retval = 0;
+	unsigned long flags;
+
+	udc = container_of(gadget, struct mv_udc, gadget);
+
+	if (udc->driver)
+		return -EBUSY;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* hook up the driver ... */
+	udc->driver = driver;
+
+	udc->usb_state = USB_STATE_ATTACHED;
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->ep0_dir = EP_DIR_OUT;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (udc->transceiver) {
+		retval = otg_set_peripheral(udc->transceiver->otg,
+					&udc->gadget);
+		if (retval) {
+			dev_err(&udc->dev->dev,
+				"unable to register peripheral to otg\n");
+			udc->driver = NULL;
+			return retval;
+		}
+	}
+
+	/* When boot with cable attached, there will be no vbus irq occurred */
+	if (udc->qwork)
+		queue_work(udc->qwork, &udc->vbus_work);
+
+	return 0;
+}
+
+static int mv_udc_stop(struct usb_gadget *gadget)
+{
+	struct mv_udc *udc;
+	unsigned long flags;
+
+	udc = container_of(gadget, struct mv_udc, gadget);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	mv_udc_enable(udc);
+	udc_stop(udc);
+
+	/* stop all usb activities */
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	stop_activity(udc, NULL);
+	mv_udc_disable(udc);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	/* unbind gadget driver */
+	udc->driver = NULL;
+
+	return 0;
+}
+
+static void mv_set_ptc(struct mv_udc *udc, u32 mode)
+{
+	u32 portsc;
+
+	portsc = readl(&udc->op_regs->portsc[0]);
+	portsc |= mode << 16;
+	writel(portsc, &udc->op_regs->portsc[0]);
+}
+
+static void prime_status_complete(struct usb_ep *ep, struct usb_request *_req)
+{
+	struct mv_ep *mvep = container_of(ep, struct mv_ep, ep);
+	struct mv_req *req = container_of(_req, struct mv_req, req);
+	struct mv_udc *udc;
+	unsigned long flags;
+
+	udc = mvep->udc;
+
+	dev_info(&udc->dev->dev, "switch to test mode %d\n", req->test_mode);
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (req->test_mode) {
+		mv_set_ptc(udc, req->test_mode);
+		req->test_mode = 0;
+	}
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+static int
+udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty)
+{
+	int retval = 0;
+	struct mv_req *req;
+	struct mv_ep *ep;
+
+	ep = &udc->eps[0];
+	udc->ep0_dir = direction;
+	udc->ep0_state = WAIT_FOR_OUT_STATUS;
+
+	req = udc->status_req;
+
+	/* fill in the reqest structure */
+	if (empty == false) {
+		*((u16 *) req->req.buf) = cpu_to_le16(status);
+		req->req.length = 2;
+	} else
+		req->req.length = 0;
+
+	req->ep = ep;
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+	if (udc->test_mode) {
+		req->req.complete = prime_status_complete;
+		req->test_mode = udc->test_mode;
+		udc->test_mode = 0;
+	} else
+		req->req.complete = NULL;
+	req->dtd_count = 0;
+
+	if (req->req.dma == DMA_ADDR_INVALID) {
+		req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
+				req->req.buf, req->req.length,
+				ep_dir(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		req->mapped = 1;
+	}
+
+	/* prime the data phase */
+	if (!req_to_dtd(req)) {
+		retval = queue_dtd(ep, req);
+		if (retval) {
+			dev_err(&udc->dev->dev,
+				"Failed to queue dtd when prime status\n");
+			goto out;
+		}
+	} else{	/* no mem */
+		retval = -ENOMEM;
+		dev_err(&udc->dev->dev,
+			"Failed to dma_pool_alloc when prime status\n");
+		goto out;
+	}
+
+	list_add_tail(&req->queue, &ep->queue);
+
+	return 0;
+out:
+	usb_gadget_unmap_request(&udc->gadget, &req->req, ep_dir(ep));
+
+	return retval;
+}
+
+static void mv_udc_testmode(struct mv_udc *udc, u16 index)
+{
+	if (index <= USB_TEST_FORCE_ENABLE) {
+		udc->test_mode = index;
+		if (udc_prime_status(udc, EP_DIR_IN, 0, true))
+			ep0_stall(udc);
+	} else
+		dev_err(&udc->dev->dev,
+			"This test mode(%d) is not supported\n", index);
+}
+
+static void ch9setaddress(struct mv_udc *udc, struct usb_ctrlrequest *setup)
+{
+	udc->dev_addr = (u8)setup->wValue;
+
+	/* update usb state */
+	udc->usb_state = USB_STATE_ADDRESS;
+
+	if (udc_prime_status(udc, EP_DIR_IN, 0, true))
+		ep0_stall(udc);
+}
+
+static void ch9getstatus(struct mv_udc *udc, u8 ep_num,
+	struct usb_ctrlrequest *setup)
+{
+	u16 status = 0;
+	int retval;
+
+	if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
+		!= (USB_DIR_IN | USB_TYPE_STANDARD))
+		return;
+
+	if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
+		status = 1 << USB_DEVICE_SELF_POWERED;
+		status |= udc->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+	} else if ((setup->bRequestType & USB_RECIP_MASK)
+			== USB_RECIP_INTERFACE) {
+		/* get interface status */
+		status = 0;
+	} else if ((setup->bRequestType & USB_RECIP_MASK)
+			== USB_RECIP_ENDPOINT) {
+		u8 ep_num, direction;
+
+		ep_num = setup->wIndex & USB_ENDPOINT_NUMBER_MASK;
+		direction = (setup->wIndex & USB_ENDPOINT_DIR_MASK)
+				? EP_DIR_IN : EP_DIR_OUT;
+		status = ep_is_stall(udc, ep_num, direction)
+				<< USB_ENDPOINT_HALT;
+	}
+
+	retval = udc_prime_status(udc, EP_DIR_IN, status, false);
+	if (retval)
+		ep0_stall(udc);
+	else
+		udc->ep0_state = DATA_STATE_XMIT;
+}
+
+static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup)
+{
+	u8 ep_num;
+	u8 direction;
+	struct mv_ep *ep;
+
+	if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK))
+		== ((USB_TYPE_STANDARD | USB_RECIP_DEVICE))) {
+		switch (setup->wValue) {
+		case USB_DEVICE_REMOTE_WAKEUP:
+			udc->remote_wakeup = 0;
+			break;
+		default:
+			goto out;
+		}
+	} else if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK))
+		== ((USB_TYPE_STANDARD | USB_RECIP_ENDPOINT))) {
+		switch (setup->wValue) {
+		case USB_ENDPOINT_HALT:
+			ep_num = setup->wIndex & USB_ENDPOINT_NUMBER_MASK;
+			direction = (setup->wIndex & USB_ENDPOINT_DIR_MASK)
+				? EP_DIR_IN : EP_DIR_OUT;
+			if (setup->wValue != 0 || setup->wLength != 0
+				|| ep_num > udc->max_eps)
+				goto out;
+			ep = &udc->eps[ep_num * 2 + direction];
+			if (ep->wedge == 1)
+				break;
+			spin_unlock(&udc->lock);
+			ep_set_stall(udc, ep_num, direction, 0);
+			spin_lock(&udc->lock);
+			break;
+		default:
+			goto out;
+		}
+	} else
+		goto out;
+
+	if (udc_prime_status(udc, EP_DIR_IN, 0, true))
+		ep0_stall(udc);
+out:
+	return;
+}
+
+static void ch9setfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup)
+{
+	u8 ep_num;
+	u8 direction;
+
+	if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK))
+		== ((USB_TYPE_STANDARD | USB_RECIP_DEVICE))) {
+		switch (setup->wValue) {
+		case USB_DEVICE_REMOTE_WAKEUP:
+			udc->remote_wakeup = 1;
+			break;
+		case USB_DEVICE_TEST_MODE:
+			if (setup->wIndex & 0xFF
+				||  udc->gadget.speed != USB_SPEED_HIGH)
+				ep0_stall(udc);
+
+			if (udc->usb_state != USB_STATE_CONFIGURED
+				&& udc->usb_state != USB_STATE_ADDRESS
+				&& udc->usb_state != USB_STATE_DEFAULT)
+				ep0_stall(udc);
+
+			mv_udc_testmode(udc, (setup->wIndex >> 8));
+			goto out;
+		default:
+			goto out;
+		}
+	} else if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK))
+		== ((USB_TYPE_STANDARD | USB_RECIP_ENDPOINT))) {
+		switch (setup->wValue) {
+		case USB_ENDPOINT_HALT:
+			ep_num = setup->wIndex & USB_ENDPOINT_NUMBER_MASK;
+			direction = (setup->wIndex & USB_ENDPOINT_DIR_MASK)
+				? EP_DIR_IN : EP_DIR_OUT;
+			if (setup->wValue != 0 || setup->wLength != 0
+				|| ep_num > udc->max_eps)
+				goto out;
+			spin_unlock(&udc->lock);
+			ep_set_stall(udc, ep_num, direction, 1);
+			spin_lock(&udc->lock);
+			break;
+		default:
+			goto out;
+		}
+	} else
+		goto out;
+
+	if (udc_prime_status(udc, EP_DIR_IN, 0, true))
+		ep0_stall(udc);
+out:
+	return;
+}
+
+static void handle_setup_packet(struct mv_udc *udc, u8 ep_num,
+	struct usb_ctrlrequest *setup)
+	__releases(&ep->udc->lock)
+	__acquires(&ep->udc->lock)
+{
+	bool delegate = false;
+
+	nuke(&udc->eps[ep_num * 2 + EP_DIR_OUT], -ESHUTDOWN);
+
+	dev_dbg(&udc->dev->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+			setup->bRequestType, setup->bRequest,
+			setup->wValue, setup->wIndex, setup->wLength);
+	/* We process some standard setup requests here */
+	if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (setup->bRequest) {
+		case USB_REQ_GET_STATUS:
+			ch9getstatus(udc, ep_num, setup);
+			break;
+
+		case USB_REQ_SET_ADDRESS:
+			ch9setaddress(udc, setup);
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+			ch9clearfeature(udc, setup);
+			break;
+
+		case USB_REQ_SET_FEATURE:
+			ch9setfeature(udc, setup);
+			break;
+
+		default:
+			delegate = true;
+		}
+	} else
+		delegate = true;
+
+	/* delegate USB standard requests to the gadget driver */
+	if (delegate == true) {
+		/* USB requests handled by gadget */
+		if (setup->wLength) {
+			/* DATA phase from gadget, STATUS phase from udc */
+			udc->ep0_dir = (setup->bRequestType & USB_DIR_IN)
+					?  EP_DIR_IN : EP_DIR_OUT;
+			spin_unlock(&udc->lock);
+			if (udc->driver->setup(&udc->gadget,
+				&udc->local_setup_buff) < 0)
+				ep0_stall(udc);
+			spin_lock(&udc->lock);
+			udc->ep0_state = (setup->bRequestType & USB_DIR_IN)
+					?  DATA_STATE_XMIT : DATA_STATE_RECV;
+		} else {
+			/* no DATA phase, IN STATUS phase from gadget */
+			udc->ep0_dir = EP_DIR_IN;
+			spin_unlock(&udc->lock);
+			if (udc->driver->setup(&udc->gadget,
+				&udc->local_setup_buff) < 0)
+				ep0_stall(udc);
+			spin_lock(&udc->lock);
+			udc->ep0_state = WAIT_FOR_OUT_STATUS;
+		}
+	}
+}
+
+/* complete DATA or STATUS phase of ep0 prime status phase if needed */
+static void ep0_req_complete(struct mv_udc *udc,
+	struct mv_ep *ep0, struct mv_req *req)
+{
+	u32 new_addr;
+
+	if (udc->usb_state == USB_STATE_ADDRESS) {
+		/* set the new address */
+		new_addr = (u32)udc->dev_addr;
+		writel(new_addr << USB_DEVICE_ADDRESS_BIT_SHIFT,
+			&udc->op_regs->deviceaddr);
+	}
+
+	done(ep0, req, 0);
+
+	switch (udc->ep0_state) {
+	case DATA_STATE_XMIT:
+		/* receive status phase */
+		if (udc_prime_status(udc, EP_DIR_OUT, 0, true))
+			ep0_stall(udc);
+		break;
+	case DATA_STATE_RECV:
+		/* send status phase */
+		if (udc_prime_status(udc, EP_DIR_IN, 0 , true))
+			ep0_stall(udc);
+		break;
+	case WAIT_FOR_OUT_STATUS:
+		udc->ep0_state = WAIT_FOR_SETUP;
+		break;
+	case WAIT_FOR_SETUP:
+		dev_err(&udc->dev->dev, "unexpect ep0 packets\n");
+		break;
+	default:
+		ep0_stall(udc);
+		break;
+	}
+}
+
+static void get_setup_data(struct mv_udc *udc, u8 ep_num, u8 *buffer_ptr)
+{
+	u32 temp;
+	struct mv_dqh *dqh;
+
+	dqh = &udc->ep_dqh[ep_num * 2 + EP_DIR_OUT];
+
+	/* Clear bit in ENDPTSETUPSTAT */
+	writel((1 << ep_num), &udc->op_regs->epsetupstat);
+
+	/* while a hazard exists when setup package arrives */
+	do {
+		/* Set Setup Tripwire */
+		temp = readl(&udc->op_regs->usbcmd);
+		writel(temp | USBCMD_SETUP_TRIPWIRE_SET, &udc->op_regs->usbcmd);
+
+		/* Copy the setup packet to local buffer */
+		memcpy(buffer_ptr, (u8 *) dqh->setup_buffer, 8);
+	} while (!(readl(&udc->op_regs->usbcmd) & USBCMD_SETUP_TRIPWIRE_SET));
+
+	/* Clear Setup Tripwire */
+	temp = readl(&udc->op_regs->usbcmd);
+	writel(temp & ~USBCMD_SETUP_TRIPWIRE_SET, &udc->op_regs->usbcmd);
+}
+
+static void irq_process_tr_complete(struct mv_udc *udc)
+{
+	u32 tmp, bit_pos;
+	int i, ep_num = 0, direction = 0;
+	struct mv_ep	*curr_ep;
+	struct mv_req *curr_req, *temp_req;
+	int status;
+
+	/*
+	 * We use separate loops for ENDPTSETUPSTAT and ENDPTCOMPLETE
+	 * because the setup packets are to be read ASAP
+	 */
+
+	/* Process all Setup packet received interrupts */
+	tmp = readl(&udc->op_regs->epsetupstat);
+
+	if (tmp) {
+		for (i = 0; i < udc->max_eps; i++) {
+			if (tmp & (1 << i)) {
+				get_setup_data(udc, i,
+					(u8 *)(&udc->local_setup_buff));
+				handle_setup_packet(udc, i,
+					&udc->local_setup_buff);
+			}
+		}
+	}
+
+	/* Don't clear the endpoint setup status register here.
+	 * It is cleared as a setup packet is read out of the buffer
+	 */
+
+	/* Process non-setup transaction complete interrupts */
+	tmp = readl(&udc->op_regs->epcomplete);
+
+	if (!tmp)
+		return;
+
+	writel(tmp, &udc->op_regs->epcomplete);
+
+	for (i = 0; i < udc->max_eps * 2; i++) {
+		ep_num = i >> 1;
+		direction = i % 2;
+
+		bit_pos = 1 << (ep_num + 16 * direction);
+
+		if (!(bit_pos & tmp))
+			continue;
+
+		if (i == 1)
+			curr_ep = &udc->eps[0];
+		else
+			curr_ep = &udc->eps[i];
+		/* process the req queue until an uncomplete request */
+		list_for_each_entry_safe(curr_req, temp_req,
+			&curr_ep->queue, queue) {
+			status = process_ep_req(udc, i, curr_req);
+			if (status)
+				break;
+
+			/* write back status to req */
+			curr_req->req.status = status;
+
+			/* ep0 request completion */
+			if (ep_num == 0) {
+				ep0_req_complete(udc, curr_ep, curr_req);
+				break;
+			} else {
+				done(curr_ep, curr_req, status);
+			}
+		}
+	}
+}
+
+static void irq_process_reset(struct mv_udc *udc)
+{
+	u32 tmp;
+	unsigned int loops;
+
+	udc->ep0_dir = EP_DIR_OUT;
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->remote_wakeup = 0;		/* default to 0 on reset */
+
+	/* The address bits are past bit 25-31. Set the address */
+	tmp = readl(&udc->op_regs->deviceaddr);
+	tmp &= ~(USB_DEVICE_ADDRESS_MASK);
+	writel(tmp, &udc->op_regs->deviceaddr);
+
+	/* Clear all the setup token semaphores */
+	tmp = readl(&udc->op_regs->epsetupstat);
+	writel(tmp, &udc->op_regs->epsetupstat);
+
+	/* Clear all the endpoint complete status bits */
+	tmp = readl(&udc->op_regs->epcomplete);
+	writel(tmp, &udc->op_regs->epcomplete);
+
+	/* wait until all endptprime bits cleared */
+	loops = LOOPS(PRIME_TIMEOUT);
+	while (readl(&udc->op_regs->epprime) & 0xFFFFFFFF) {
+		if (loops == 0) {
+			dev_err(&udc->dev->dev,
+				"Timeout for ENDPTPRIME = 0x%x\n",
+				readl(&udc->op_regs->epprime));
+			break;
+		}
+		loops--;
+		udelay(LOOPS_USEC);
+	}
+
+	/* Write 1s to the Flush register */
+	writel((u32)~0, &udc->op_regs->epflush);
+
+	if (readl(&udc->op_regs->portsc[0]) & PORTSCX_PORT_RESET) {
+		dev_info(&udc->dev->dev, "usb bus reset\n");
+		udc->usb_state = USB_STATE_DEFAULT;
+		/* reset all the queues, stop all USB activities */
+		gadget_reset(udc, udc->driver);
+	} else {
+		dev_info(&udc->dev->dev, "USB reset portsc 0x%x\n",
+			readl(&udc->op_regs->portsc));
+
+		/*
+		 * re-initialize
+		 * controller reset
+		 */
+		udc_reset(udc);
+
+		/* reset all the queues, stop all USB activities */
+		stop_activity(udc, udc->driver);
+
+		/* reset ep0 dQH and endptctrl */
+		ep0_reset(udc);
+
+		/* enable interrupt and set controller to run state */
+		udc_start(udc);
+
+		udc->usb_state = USB_STATE_ATTACHED;
+	}
+}
+
+static void handle_bus_resume(struct mv_udc *udc)
+{
+	udc->usb_state = udc->resume_state;
+	udc->resume_state = 0;
+
+	/* report resume to the driver */
+	if (udc->driver) {
+		if (udc->driver->resume) {
+			spin_unlock(&udc->lock);
+			udc->driver->resume(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+}
+
+static void irq_process_suspend(struct mv_udc *udc)
+{
+	udc->resume_state = udc->usb_state;
+	udc->usb_state = USB_STATE_SUSPENDED;
+
+	if (udc->driver->suspend) {
+		spin_unlock(&udc->lock);
+		udc->driver->suspend(&udc->gadget);
+		spin_lock(&udc->lock);
+	}
+}
+
+static void irq_process_port_change(struct mv_udc *udc)
+{
+	u32 portsc;
+
+	portsc = readl(&udc->op_regs->portsc[0]);
+	if (!(portsc & PORTSCX_PORT_RESET)) {
+		/* Get the speed */
+		u32 speed = portsc & PORTSCX_PORT_SPEED_MASK;
+		switch (speed) {
+		case PORTSCX_PORT_SPEED_HIGH:
+			udc->gadget.speed = USB_SPEED_HIGH;
+			break;
+		case PORTSCX_PORT_SPEED_FULL:
+			udc->gadget.speed = USB_SPEED_FULL;
+			break;
+		case PORTSCX_PORT_SPEED_LOW:
+			udc->gadget.speed = USB_SPEED_LOW;
+			break;
+		default:
+			udc->gadget.speed = USB_SPEED_UNKNOWN;
+			break;
+		}
+	}
+
+	if (portsc & PORTSCX_PORT_SUSPEND) {
+		udc->resume_state = udc->usb_state;
+		udc->usb_state = USB_STATE_SUSPENDED;
+		if (udc->driver->suspend) {
+			spin_unlock(&udc->lock);
+			udc->driver->suspend(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+
+	if (!(portsc & PORTSCX_PORT_SUSPEND)
+		&& udc->usb_state == USB_STATE_SUSPENDED) {
+		handle_bus_resume(udc);
+	}
+
+	if (!udc->resume_state)
+		udc->usb_state = USB_STATE_DEFAULT;
+}
+
+static void irq_process_error(struct mv_udc *udc)
+{
+	/* Increment the error count */
+	udc->errors++;
+}
+
+static irqreturn_t mv_udc_irq(int irq, void *dev)
+{
+	struct mv_udc *udc = (struct mv_udc *)dev;
+	u32 status, intr;
+
+	/* Disable ISR when stopped bit is set */
+	if (udc->stopped)
+		return IRQ_NONE;
+
+	spin_lock(&udc->lock);
+
+	status = readl(&udc->op_regs->usbsts);
+	intr = readl(&udc->op_regs->usbintr);
+	status &= intr;
+
+	if (status == 0) {
+		spin_unlock(&udc->lock);
+		return IRQ_NONE;
+	}
+
+	/* Clear all the interrupts occurred */
+	writel(status, &udc->op_regs->usbsts);
+
+	if (status & USBSTS_ERR)
+		irq_process_error(udc);
+
+	if (status & USBSTS_RESET)
+		irq_process_reset(udc);
+
+	if (status & USBSTS_PORT_CHANGE)
+		irq_process_port_change(udc);
+
+	if (status & USBSTS_INT)
+		irq_process_tr_complete(udc);
+
+	if (status & USBSTS_SUSPEND)
+		irq_process_suspend(udc);
+
+	spin_unlock(&udc->lock);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mv_udc_vbus_irq(int irq, void *dev)
+{
+	struct mv_udc *udc = (struct mv_udc *)dev;
+
+	/* polling VBUS and init phy may cause too much time*/
+	if (udc->qwork)
+		queue_work(udc->qwork, &udc->vbus_work);
+
+	return IRQ_HANDLED;
+}
+
+static void mv_udc_vbus_work(struct work_struct *work)
+{
+	struct mv_udc *udc;
+	unsigned int vbus;
+
+	udc = container_of(work, struct mv_udc, vbus_work);
+	if (!udc->pdata->vbus)
+		return;
+
+	vbus = udc->pdata->vbus->poll();
+	dev_info(&udc->dev->dev, "vbus is %d\n", vbus);
+
+	if (vbus == VBUS_HIGH)
+		mv_udc_vbus_session(&udc->gadget, 1);
+	else if (vbus == VBUS_LOW)
+		mv_udc_vbus_session(&udc->gadget, 0);
+}
+
+/* release device structure */
+static void gadget_release(struct device *_dev)
+{
+	struct mv_udc *udc;
+
+	udc = dev_get_drvdata(_dev);
+
+	complete(udc->done);
+}
+
+static int mv_udc_remove(struct platform_device *pdev)
+{
+	struct mv_udc *udc;
+
+	udc = platform_get_drvdata(pdev);
+
+	usb_del_gadget_udc(&udc->gadget);
+
+	if (udc->qwork)
+		destroy_workqueue(udc->qwork);
+
+	/* free memory allocated in probe */
+	dma_pool_destroy(udc->dtd_pool);
+
+	if (udc->ep_dqh)
+		dma_free_coherent(&pdev->dev, udc->ep_dqh_size,
+			udc->ep_dqh, udc->ep_dqh_dma);
+
+	mv_udc_disable(udc);
+
+	/* free dev, wait for the release() finished */
+	wait_for_completion(udc->done);
+
+	return 0;
+}
+
+static int mv_udc_probe(struct platform_device *pdev)
+{
+	struct mv_usb_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct mv_udc *udc;
+	int retval = 0;
+	struct resource *r;
+	size_t size;
+
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "missing platform_data\n");
+		return -ENODEV;
+	}
+
+	udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL);
+	if (udc == NULL)
+		return -ENOMEM;
+
+	udc->done = &release_done;
+	udc->pdata = dev_get_platdata(&pdev->dev);
+	spin_lock_init(&udc->lock);
+
+	udc->dev = pdev;
+
+	if (pdata->mode == MV_USB_MODE_OTG) {
+		udc->transceiver = devm_usb_get_phy(&pdev->dev,
+					USB_PHY_TYPE_USB2);
+		if (IS_ERR(udc->transceiver)) {
+			retval = PTR_ERR(udc->transceiver);
+
+			if (retval == -ENXIO)
+				return retval;
+
+			udc->transceiver = NULL;
+			return -EPROBE_DEFER;
+		}
+	}
+
+	/* udc only have one sysclk. */
+	udc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(udc->clk))
+		return PTR_ERR(udc->clk);
+
+	r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "capregs");
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no I/O memory resource defined\n");
+		return -ENODEV;
+	}
+
+	udc->cap_regs = (struct mv_cap_regs __iomem *)
+		devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (udc->cap_regs == NULL) {
+		dev_err(&pdev->dev, "failed to map I/O memory\n");
+		return -EBUSY;
+	}
+
+	r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "phyregs");
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no phy I/O memory resource defined\n");
+		return -ENODEV;
+	}
+
+	udc->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (udc->phy_regs == NULL) {
+		dev_err(&pdev->dev, "failed to map phy I/O memory\n");
+		return -EBUSY;
+	}
+
+	/* we will acces controller register, so enable the clk */
+	retval = mv_udc_enable_internal(udc);
+	if (retval)
+		return retval;
+
+	udc->op_regs =
+		(struct mv_op_regs __iomem *)((unsigned long)udc->cap_regs
+		+ (readl(&udc->cap_regs->caplength_hciversion)
+			& CAPLENGTH_MASK));
+	udc->max_eps = readl(&udc->cap_regs->dccparams) & DCCPARAMS_DEN_MASK;
+
+	/*
+	 * some platform will use usb to download image, it may not disconnect
+	 * usb gadget before loading kernel. So first stop udc here.
+	 */
+	udc_stop(udc);
+	writel(0xFFFFFFFF, &udc->op_regs->usbsts);
+
+	size = udc->max_eps * sizeof(struct mv_dqh) *2;
+	size = (size + DQH_ALIGNMENT - 1) & ~(DQH_ALIGNMENT - 1);
+	udc->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
+					&udc->ep_dqh_dma, GFP_KERNEL);
+
+	if (udc->ep_dqh == NULL) {
+		dev_err(&pdev->dev, "allocate dQH memory failed\n");
+		retval = -ENOMEM;
+		goto err_disable_clock;
+	}
+	udc->ep_dqh_size = size;
+
+	/* create dTD dma_pool resource */
+	udc->dtd_pool = dma_pool_create("mv_dtd",
+			&pdev->dev,
+			sizeof(struct mv_dtd),
+			DTD_ALIGNMENT,
+			DMA_BOUNDARY);
+
+	if (!udc->dtd_pool) {
+		retval = -ENOMEM;
+		goto err_free_dma;
+	}
+
+	size = udc->max_eps * sizeof(struct mv_ep) *2;
+	udc->eps = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+	if (udc->eps == NULL) {
+		retval = -ENOMEM;
+		goto err_destroy_dma;
+	}
+
+	/* initialize ep0 status request structure */
+	udc->status_req = devm_kzalloc(&pdev->dev, sizeof(struct mv_req),
+					GFP_KERNEL);
+	if (!udc->status_req) {
+		retval = -ENOMEM;
+		goto err_destroy_dma;
+	}
+	INIT_LIST_HEAD(&udc->status_req->queue);
+
+	/* allocate a small amount of memory to get valid address */
+	udc->status_req->req.buf = kzalloc(8, GFP_KERNEL);
+	udc->status_req->req.dma = DMA_ADDR_INVALID;
+
+	udc->resume_state = USB_STATE_NOTATTACHED;
+	udc->usb_state = USB_STATE_POWERED;
+	udc->ep0_dir = EP_DIR_OUT;
+	udc->remote_wakeup = 0;
+
+	r = platform_get_resource(udc->dev, IORESOURCE_IRQ, 0);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no IRQ resource defined\n");
+		retval = -ENODEV;
+		goto err_destroy_dma;
+	}
+	udc->irq = r->start;
+	if (devm_request_irq(&pdev->dev, udc->irq, mv_udc_irq,
+		IRQF_SHARED, driver_name, udc)) {
+		dev_err(&pdev->dev, "Request irq %d for UDC failed\n",
+			udc->irq);
+		retval = -ENODEV;
+		goto err_destroy_dma;
+	}
+
+	/* initialize gadget structure */
+	udc->gadget.ops = &mv_ops;	/* usb_gadget_ops */
+	udc->gadget.ep0 = &udc->eps[0].ep;	/* gadget ep0 */
+	INIT_LIST_HEAD(&udc->gadget.ep_list);	/* ep_list */
+	udc->gadget.speed = USB_SPEED_UNKNOWN;	/* speed */
+	udc->gadget.max_speed = USB_SPEED_HIGH;	/* support dual speed */
+
+	/* the "gadget" abstracts/virtualizes the controller */
+	udc->gadget.name = driver_name;		/* gadget name */
+
+	eps_init(udc);
+
+	/* VBUS detect: we can disable/enable clock on demand.*/
+	if (udc->transceiver)
+		udc->clock_gating = 1;
+	else if (pdata->vbus) {
+		udc->clock_gating = 1;
+		retval = devm_request_threaded_irq(&pdev->dev,
+				pdata->vbus->irq, NULL,
+				mv_udc_vbus_irq, IRQF_ONESHOT, "vbus", udc);
+		if (retval) {
+			dev_info(&pdev->dev,
+				"Can not request irq for VBUS, "
+				"disable clock gating\n");
+			udc->clock_gating = 0;
+		}
+
+		udc->qwork = create_singlethread_workqueue("mv_udc_queue");
+		if (!udc->qwork) {
+			dev_err(&pdev->dev, "cannot create workqueue\n");
+			retval = -ENOMEM;
+			goto err_destroy_dma;
+		}
+
+		INIT_WORK(&udc->vbus_work, mv_udc_vbus_work);
+	}
+
+	/*
+	 * When clock gating is supported, we can disable clk and phy.
+	 * If not, it means that VBUS detection is not supported, we
+	 * have to enable vbus active all the time to let controller work.
+	 */
+	if (udc->clock_gating)
+		mv_udc_disable_internal(udc);
+	else
+		udc->vbus_active = 1;
+
+	retval = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget,
+			gadget_release);
+	if (retval)
+		goto err_create_workqueue;
+
+	platform_set_drvdata(pdev, udc);
+	dev_info(&pdev->dev, "successful probe UDC device %s clock gating.\n",
+		udc->clock_gating ? "with" : "without");
+
+	return 0;
+
+err_create_workqueue:
+	if (udc->qwork)
+		destroy_workqueue(udc->qwork);
+err_destroy_dma:
+	dma_pool_destroy(udc->dtd_pool);
+err_free_dma:
+	dma_free_coherent(&pdev->dev, udc->ep_dqh_size,
+			udc->ep_dqh, udc->ep_dqh_dma);
+err_disable_clock:
+	mv_udc_disable_internal(udc);
+
+	return retval;
+}
+
+#ifdef CONFIG_PM
+static int mv_udc_suspend(struct device *dev)
+{
+	struct mv_udc *udc;
+
+	udc = dev_get_drvdata(dev);
+
+	/* if OTG is enabled, the following will be done in OTG driver*/
+	if (udc->transceiver)
+		return 0;
+
+	if (udc->pdata->vbus && udc->pdata->vbus->poll)
+		if (udc->pdata->vbus->poll() == VBUS_HIGH) {
+			dev_info(&udc->dev->dev, "USB cable is connected!\n");
+			return -EAGAIN;
+		}
+
+	/*
+	 * only cable is unplugged, udc can suspend.
+	 * So do not care about clock_gating == 1.
+	 */
+	if (!udc->clock_gating) {
+		udc_stop(udc);
+
+		spin_lock_irq(&udc->lock);
+		/* stop all usb activities */
+		stop_activity(udc, udc->driver);
+		spin_unlock_irq(&udc->lock);
+
+		mv_udc_disable_internal(udc);
+	}
+
+	return 0;
+}
+
+static int mv_udc_resume(struct device *dev)
+{
+	struct mv_udc *udc;
+	int retval;
+
+	udc = dev_get_drvdata(dev);
+
+	/* if OTG is enabled, the following will be done in OTG driver*/
+	if (udc->transceiver)
+		return 0;
+
+	if (!udc->clock_gating) {
+		retval = mv_udc_enable_internal(udc);
+		if (retval)
+			return retval;
+
+		if (udc->driver && udc->softconnect) {
+			udc_reset(udc);
+			ep0_reset(udc);
+			udc_start(udc);
+		}
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops mv_udc_pm_ops = {
+	.suspend	= mv_udc_suspend,
+	.resume		= mv_udc_resume,
+};
+#endif
+
+static void mv_udc_shutdown(struct platform_device *pdev)
+{
+	struct mv_udc *udc;
+	u32 mode;
+
+	udc = platform_get_drvdata(pdev);
+	/* reset controller mode to IDLE */
+	mv_udc_enable(udc);
+	mode = readl(&udc->op_regs->usbmode);
+	mode &= ~3;
+	writel(mode, &udc->op_regs->usbmode);
+	mv_udc_disable(udc);
+}
+
+static struct platform_driver udc_driver = {
+	.probe		= mv_udc_probe,
+	.remove		= mv_udc_remove,
+	.shutdown	= mv_udc_shutdown,
+	.driver		= {
+		.name	= "mv-udc",
+#ifdef CONFIG_PM
+		.pm	= &mv_udc_pm_ops,
+#endif
+	},
+};
+
+module_platform_driver(udc_driver);
+MODULE_ALIAS("platform:mv-udc");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Chao Xie <chao.xie@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c
new file mode 100644
index 000000000..538c1b9a2
--- /dev/null
+++ b/drivers/usb/gadget/udc/net2272.c
@@ -0,0 +1,2725 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for PLX NET2272 USB device controller
+ *
+ * Copyright (C) 2005-2006 PLX Technology, Inc.
+ * Copyright (C) 2006-2011 Analog Devices, Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/prefetch.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+#include "net2272.h"
+
+#define DRIVER_DESC "PLX NET2272 USB Peripheral Controller"
+
+static const char driver_name[] = "net2272";
+static const char driver_vers[] = "2006 October 17/mainline";
+static const char driver_desc[] = DRIVER_DESC;
+
+static const char ep0name[] = "ep0";
+static const char * const ep_name[] = {
+	ep0name,
+	"ep-a", "ep-b", "ep-c",
+};
+
+#ifdef CONFIG_USB_NET2272_DMA
+/*
+ * use_dma: the NET2272 can use an external DMA controller.
+ * Note that since there is no generic DMA api, some functions,
+ * notably request_dma, start_dma, and cancel_dma will need to be
+ * modified for your platform's particular dma controller.
+ *
+ * If use_dma is disabled, pio will be used instead.
+ */
+static bool use_dma = false;
+module_param(use_dma, bool, 0644);
+
+/*
+ * dma_ep: selects the endpoint for use with dma (1=ep-a, 2=ep-b)
+ * The NET2272 can only use dma for a single endpoint at a time.
+ * At some point this could be modified to allow either endpoint
+ * to take control of dma as it becomes available.
+ *
+ * Note that DMA should not be used on OUT endpoints unless it can
+ * be guaranteed that no short packets will arrive on an IN endpoint
+ * while the DMA operation is pending.  Otherwise the OUT DMA will
+ * terminate prematurely (See NET2272 Errata 630-0213-0101)
+ */
+static ushort dma_ep = 1;
+module_param(dma_ep, ushort, 0644);
+
+/*
+ * dma_mode: net2272 dma mode setting (see LOCCTL1 definition):
+ *	mode 0 == Slow DREQ mode
+ *	mode 1 == Fast DREQ mode
+ *	mode 2 == Burst mode
+ */
+static ushort dma_mode = 2;
+module_param(dma_mode, ushort, 0644);
+#else
+#define use_dma 0
+#define dma_ep 1
+#define dma_mode 2
+#endif
+
+/*
+ * fifo_mode: net2272 buffer configuration:
+ *      mode 0 == ep-{a,b,c} 512db each
+ *      mode 1 == ep-a 1k, ep-{b,c} 512db
+ *      mode 2 == ep-a 1k, ep-b 1k, ep-c 512db
+ *      mode 3 == ep-a 1k, ep-b disabled, ep-c 512db
+ */
+static ushort fifo_mode;
+module_param(fifo_mode, ushort, 0644);
+
+/*
+ * enable_suspend: When enabled, the driver will respond to
+ * USB suspend requests by powering down the NET2272.  Otherwise,
+ * USB suspend requests will be ignored.  This is acceptable for
+ * self-powered devices.  For bus powered devices set this to 1.
+ */
+static ushort enable_suspend;
+module_param(enable_suspend, ushort, 0644);
+
+static void assert_out_naking(struct net2272_ep *ep, const char *where)
+{
+	u8 tmp;
+
+#ifndef DEBUG
+	return;
+#endif
+
+	tmp = net2272_ep_read(ep, EP_STAT0);
+	if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) {
+		dev_dbg(ep->dev->dev, "%s %s %02x !NAK\n",
+			ep->ep.name, where, tmp);
+		net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS);
+	}
+}
+#define ASSERT_OUT_NAKING(ep) assert_out_naking(ep, __func__)
+
+static void stop_out_naking(struct net2272_ep *ep)
+{
+	u8 tmp = net2272_ep_read(ep, EP_STAT0);
+
+	if ((tmp & (1 << NAK_OUT_PACKETS)) != 0)
+		net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS);
+}
+
+#define PIPEDIR(bAddress) (usb_pipein(bAddress) ? "in" : "out")
+
+static char *type_string(u8 bmAttributes)
+{
+	switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_BULK: return "bulk";
+	case USB_ENDPOINT_XFER_ISOC: return "iso";
+	case USB_ENDPOINT_XFER_INT:  return "intr";
+	default:                     return "control";
+	}
+}
+
+static char *buf_state_string(unsigned state)
+{
+	switch (state) {
+	case BUFF_FREE:  return "free";
+	case BUFF_VALID: return "valid";
+	case BUFF_LCL:   return "local";
+	case BUFF_USB:   return "usb";
+	default:         return "unknown";
+	}
+}
+
+static char *dma_mode_string(void)
+{
+	if (!use_dma)
+		return "PIO";
+	switch (dma_mode) {
+	case 0:  return "SLOW DREQ";
+	case 1:  return "FAST DREQ";
+	case 2:  return "BURST";
+	default: return "invalid";
+	}
+}
+
+static void net2272_dequeue_all(struct net2272_ep *);
+static int net2272_kick_dma(struct net2272_ep *, struct net2272_request *);
+static int net2272_fifo_status(struct usb_ep *);
+
+static const struct usb_ep_ops net2272_ep_ops;
+
+/*---------------------------------------------------------------------------*/
+
+static int
+net2272_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+{
+	struct net2272 *dev;
+	struct net2272_ep *ep;
+	u32 max;
+	u8 tmp;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || !desc || ep->desc || _ep->name == ep0name
+			|| desc->bDescriptorType != USB_DT_ENDPOINT)
+		return -EINVAL;
+	dev = ep->dev;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	max = usb_endpoint_maxp(desc);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	_ep->maxpacket = max;
+	ep->desc = desc;
+
+	/* net2272_ep_reset() has already been called */
+	ep->stopped = 0;
+	ep->wedged = 0;
+
+	/* set speed-dependent max packet */
+	net2272_ep_write(ep, EP_MAXPKT0, max & 0xff);
+	net2272_ep_write(ep, EP_MAXPKT1, (max & 0xff00) >> 8);
+
+	/* set type, direction, address; reset fifo counters */
+	net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH);
+	tmp = usb_endpoint_type(desc);
+	if (usb_endpoint_xfer_bulk(desc)) {
+		/* catch some particularly blatant driver bugs */
+		if ((dev->gadget.speed == USB_SPEED_HIGH && max != 512) ||
+		    (dev->gadget.speed == USB_SPEED_FULL && max > 64)) {
+			spin_unlock_irqrestore(&dev->lock, flags);
+			return -ERANGE;
+		}
+	}
+	ep->is_iso = usb_endpoint_xfer_isoc(desc) ? 1 : 0;
+	tmp <<= ENDPOINT_TYPE;
+	tmp |= ((desc->bEndpointAddress & 0x0f) << ENDPOINT_NUMBER);
+	tmp |= usb_endpoint_dir_in(desc) << ENDPOINT_DIRECTION;
+	tmp |= (1 << ENDPOINT_ENABLE);
+
+	/* for OUT transfers, block the rx fifo until a read is posted */
+	ep->is_in = usb_endpoint_dir_in(desc);
+	if (!ep->is_in)
+		net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS);
+
+	net2272_ep_write(ep, EP_CFG, tmp);
+
+	/* enable irqs */
+	tmp = (1 << ep->num) | net2272_read(dev, IRQENB0);
+	net2272_write(dev, IRQENB0, tmp);
+
+	tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
+		| (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)
+		| net2272_ep_read(ep, EP_IRQENB);
+	net2272_ep_write(ep, EP_IRQENB, tmp);
+
+	tmp = desc->bEndpointAddress;
+	dev_dbg(dev->dev, "enabled %s (ep%d%s-%s) max %04x cfg %02x\n",
+		_ep->name, tmp & 0x0f, PIPEDIR(tmp),
+		type_string(desc->bmAttributes), max,
+		net2272_ep_read(ep, EP_CFG));
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return 0;
+}
+
+static void net2272_ep_reset(struct net2272_ep *ep)
+{
+	u8 tmp;
+
+	ep->desc = NULL;
+	INIT_LIST_HEAD(&ep->queue);
+
+	usb_ep_set_maxpacket_limit(&ep->ep, ~0);
+	ep->ep.ops = &net2272_ep_ops;
+
+	/* disable irqs, endpoint */
+	net2272_ep_write(ep, EP_IRQENB, 0);
+
+	/* init to our chosen defaults, notably so that we NAK OUT
+	 * packets until the driver queues a read.
+	 */
+	tmp = (1 << NAK_OUT_PACKETS_MODE) | (1 << ALT_NAK_OUT_PACKETS);
+	net2272_ep_write(ep, EP_RSPSET, tmp);
+
+	tmp = (1 << INTERRUPT_MODE) | (1 << HIDE_STATUS_PHASE);
+	if (ep->num != 0)
+		tmp |= (1 << ENDPOINT_TOGGLE) | (1 << ENDPOINT_HALT);
+
+	net2272_ep_write(ep, EP_RSPCLR, tmp);
+
+	/* scrub most status bits, and flush any fifo state */
+	net2272_ep_write(ep, EP_STAT0,
+			  (1 << DATA_IN_TOKEN_INTERRUPT)
+			| (1 << DATA_OUT_TOKEN_INTERRUPT)
+			| (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)
+			| (1 << DATA_PACKET_RECEIVED_INTERRUPT)
+			| (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT));
+
+	net2272_ep_write(ep, EP_STAT1,
+			    (1 << TIMEOUT)
+			  | (1 << USB_OUT_ACK_SENT)
+			  | (1 << USB_OUT_NAK_SENT)
+			  | (1 << USB_IN_ACK_RCVD)
+			  | (1 << USB_IN_NAK_SENT)
+			  | (1 << USB_STALL_SENT)
+			  | (1 << LOCAL_OUT_ZLP)
+			  | (1 << BUFFER_FLUSH));
+
+	/* fifo size is handled separately */
+}
+
+static int net2272_disable(struct usb_ep *_ep)
+{
+	struct net2272_ep *ep;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || !ep->desc || _ep->name == ep0name)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	net2272_dequeue_all(ep);
+	net2272_ep_reset(ep);
+
+	dev_vdbg(ep->dev->dev, "disabled %s\n", _ep->name);
+
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+	return 0;
+}
+
+/*---------------------------------------------------------------------------*/
+
+static struct usb_request *
+net2272_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct net2272_request *req;
+
+	if (!_ep)
+		return NULL;
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void
+net2272_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct net2272_request *req;
+
+	if (!_ep || !_req)
+		return;
+
+	req = container_of(_req, struct net2272_request, req);
+	WARN_ON(!list_empty(&req->queue));
+	kfree(req);
+}
+
+static void
+net2272_done(struct net2272_ep *ep, struct net2272_request *req, int status)
+{
+	struct net2272 *dev;
+	unsigned stopped = ep->stopped;
+
+	if (ep->num == 0) {
+		if (ep->dev->protocol_stall) {
+			ep->stopped = 1;
+			set_halt(ep);
+		}
+		allow_status(ep);
+	}
+
+	list_del_init(&req->queue);
+
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	dev = ep->dev;
+	if (use_dma && ep->dma)
+		usb_gadget_unmap_request(&dev->gadget, &req->req,
+				ep->is_in);
+
+	if (status && status != -ESHUTDOWN)
+		dev_vdbg(dev->dev, "complete %s req %p stat %d len %u/%u buf %p\n",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length, req->req.buf);
+
+	/* don't modify queue heads during completion callback */
+	ep->stopped = 1;
+	spin_unlock(&dev->lock);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&dev->lock);
+	ep->stopped = stopped;
+}
+
+static int
+net2272_write_packet(struct net2272_ep *ep, u8 *buf,
+	struct net2272_request *req, unsigned max)
+{
+	u16 __iomem *ep_data = net2272_reg_addr(ep->dev, EP_DATA);
+	u16 *bufp;
+	unsigned length, count;
+	u8 tmp;
+
+	length = min(req->req.length - req->req.actual, max);
+	req->req.actual += length;
+
+	dev_vdbg(ep->dev->dev, "write packet %s req %p max %u len %u avail %u\n",
+		ep->ep.name, req, max, length,
+		(net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0));
+
+	count = length;
+	bufp = (u16 *)buf;
+
+	while (likely(count >= 2)) {
+		/* no byte-swap required; chip endian set during init */
+		writew(*bufp++, ep_data);
+		count -= 2;
+	}
+	buf = (u8 *)bufp;
+
+	/* write final byte by placing the NET2272 into 8-bit mode */
+	if (unlikely(count)) {
+		tmp = net2272_read(ep->dev, LOCCTL);
+		net2272_write(ep->dev, LOCCTL, tmp & ~(1 << DATA_WIDTH));
+		writeb(*buf, ep_data);
+		net2272_write(ep->dev, LOCCTL, tmp);
+	}
+	return length;
+}
+
+/* returns: 0: still running, 1: completed, negative: errno */
+static int
+net2272_write_fifo(struct net2272_ep *ep, struct net2272_request *req)
+{
+	u8 *buf;
+	unsigned count, max;
+	int status;
+
+	dev_vdbg(ep->dev->dev, "write_fifo %s actual %d len %d\n",
+		ep->ep.name, req->req.actual, req->req.length);
+
+	/*
+	 * Keep loading the endpoint until the final packet is loaded,
+	 * or the endpoint buffer is full.
+	 */
+ top:
+	/*
+	 * Clear interrupt status
+	 *  - Packet Transmitted interrupt will become set again when the
+	 *    host successfully takes another packet
+	 */
+	net2272_ep_write(ep, EP_STAT0, (1 << DATA_PACKET_TRANSMITTED_INTERRUPT));
+	while (!(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_FULL))) {
+		buf = req->req.buf + req->req.actual;
+		prefetch(buf);
+
+		/* force pagesel */
+		net2272_ep_read(ep, EP_STAT0);
+
+		max = (net2272_ep_read(ep, EP_AVAIL1) << 8) |
+			(net2272_ep_read(ep, EP_AVAIL0));
+
+		if (max < ep->ep.maxpacket)
+			max = (net2272_ep_read(ep, EP_AVAIL1) << 8)
+				| (net2272_ep_read(ep, EP_AVAIL0));
+
+		count = net2272_write_packet(ep, buf, req, max);
+		/* see if we are done */
+		if (req->req.length == req->req.actual) {
+			/* validate short or zlp packet */
+			if (count < ep->ep.maxpacket)
+				set_fifo_bytecount(ep, 0);
+			net2272_done(ep, req, 0);
+
+			if (!list_empty(&ep->queue)) {
+				req = list_entry(ep->queue.next,
+						struct net2272_request,
+						queue);
+				status = net2272_kick_dma(ep, req);
+
+				if (status < 0)
+					if ((net2272_ep_read(ep, EP_STAT0)
+							& (1 << BUFFER_EMPTY)))
+						goto top;
+			}
+			return 1;
+		}
+		net2272_ep_write(ep, EP_STAT0, (1 << DATA_PACKET_TRANSMITTED_INTERRUPT));
+	}
+	return 0;
+}
+
+static void
+net2272_out_flush(struct net2272_ep *ep)
+{
+	ASSERT_OUT_NAKING(ep);
+
+	net2272_ep_write(ep, EP_STAT0, (1 << DATA_OUT_TOKEN_INTERRUPT)
+			| (1 << DATA_PACKET_RECEIVED_INTERRUPT));
+	net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH);
+}
+
+static int
+net2272_read_packet(struct net2272_ep *ep, u8 *buf,
+	struct net2272_request *req, unsigned avail)
+{
+	u16 __iomem *ep_data = net2272_reg_addr(ep->dev, EP_DATA);
+	unsigned is_short;
+	u16 *bufp;
+
+	req->req.actual += avail;
+
+	dev_vdbg(ep->dev->dev, "read packet %s req %p len %u avail %u\n",
+		ep->ep.name, req, avail,
+		(net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0));
+
+	is_short = (avail < ep->ep.maxpacket);
+
+	if (unlikely(avail == 0)) {
+		/* remove any zlp from the buffer */
+		(void)readw(ep_data);
+		return is_short;
+	}
+
+	/* Ensure we get the final byte */
+	if (unlikely(avail % 2))
+		avail++;
+	bufp = (u16 *)buf;
+
+	do {
+		*bufp++ = readw(ep_data);
+		avail -= 2;
+	} while (avail);
+
+	/*
+	 * To avoid false endpoint available race condition must read
+	 * ep stat0 twice in the case of a short transfer
+	 */
+	if (net2272_ep_read(ep, EP_STAT0) & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT))
+		net2272_ep_read(ep, EP_STAT0);
+
+	return is_short;
+}
+
+static int
+net2272_read_fifo(struct net2272_ep *ep, struct net2272_request *req)
+{
+	u8 *buf;
+	unsigned is_short;
+	int count;
+	int tmp;
+	int cleanup = 0;
+
+	dev_vdbg(ep->dev->dev, "read_fifo %s actual %d len %d\n",
+		ep->ep.name, req->req.actual, req->req.length);
+
+ top:
+	do {
+		buf = req->req.buf + req->req.actual;
+		prefetchw(buf);
+
+		count = (net2272_ep_read(ep, EP_AVAIL1) << 8)
+			| net2272_ep_read(ep, EP_AVAIL0);
+
+		net2272_ep_write(ep, EP_STAT0,
+			(1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) |
+			(1 << DATA_PACKET_RECEIVED_INTERRUPT));
+
+		tmp = req->req.length - req->req.actual;
+
+		if (count > tmp) {
+			if ((tmp % ep->ep.maxpacket) != 0) {
+				dev_err(ep->dev->dev,
+					"%s out fifo %d bytes, expected %d\n",
+					ep->ep.name, count, tmp);
+				cleanup = 1;
+			}
+			count = (tmp > 0) ? tmp : 0;
+		}
+
+		is_short = net2272_read_packet(ep, buf, req, count);
+
+		/* completion */
+		if (unlikely(cleanup || is_short ||
+				req->req.actual == req->req.length)) {
+
+			if (cleanup) {
+				net2272_out_flush(ep);
+				net2272_done(ep, req, -EOVERFLOW);
+			} else
+				net2272_done(ep, req, 0);
+
+			/* re-initialize endpoint transfer registers
+			 * otherwise they may result in erroneous pre-validation
+			 * for subsequent control reads
+			 */
+			if (unlikely(ep->num == 0)) {
+				net2272_ep_write(ep, EP_TRANSFER2, 0);
+				net2272_ep_write(ep, EP_TRANSFER1, 0);
+				net2272_ep_write(ep, EP_TRANSFER0, 0);
+			}
+
+			if (!list_empty(&ep->queue)) {
+				int status;
+
+				req = list_entry(ep->queue.next,
+					struct net2272_request, queue);
+				status = net2272_kick_dma(ep, req);
+				if ((status < 0) &&
+				    !(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_EMPTY)))
+					goto top;
+			}
+			return 1;
+		}
+	} while (!(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_EMPTY)));
+
+	return 0;
+}
+
+static void
+net2272_pio_advance(struct net2272_ep *ep)
+{
+	struct net2272_request *req;
+
+	if (unlikely(list_empty(&ep->queue)))
+		return;
+
+	req = list_entry(ep->queue.next, struct net2272_request, queue);
+	(ep->is_in ? net2272_write_fifo : net2272_read_fifo)(ep, req);
+}
+
+/* returns 0 on success, else negative errno */
+static int
+net2272_request_dma(struct net2272 *dev, unsigned ep, u32 buf,
+	unsigned len, unsigned dir)
+{
+	dev_vdbg(dev->dev, "request_dma ep %d buf %08x len %d dir %d\n",
+		ep, buf, len, dir);
+
+	/* The NET2272 only supports a single dma channel */
+	if (dev->dma_busy)
+		return -EBUSY;
+	/*
+	 * EP_TRANSFER (used to determine the number of bytes received
+	 * in an OUT transfer) is 24 bits wide; don't ask for more than that.
+	 */
+	if ((dir == 1) && (len > 0x1000000))
+		return -EINVAL;
+
+	dev->dma_busy = 1;
+
+	/* initialize platform's dma */
+#ifdef CONFIG_USB_PCI
+	/* NET2272 addr, buffer addr, length, etc. */
+	switch (dev->dev_id) {
+	case PCI_DEVICE_ID_RDK1:
+		/* Setup PLX 9054 DMA mode */
+		writel((1 << LOCAL_BUS_WIDTH) |
+			(1 << TA_READY_INPUT_ENABLE) |
+			(0 << LOCAL_BURST_ENABLE) |
+			(1 << DONE_INTERRUPT_ENABLE) |
+			(1 << LOCAL_ADDRESSING_MODE) |
+			(1 << DEMAND_MODE) |
+			(1 << DMA_EOT_ENABLE) |
+			(1 << FAST_SLOW_TERMINATE_MODE_SELECT) |
+			(1 << DMA_CHANNEL_INTERRUPT_SELECT),
+			dev->rdk1.plx9054_base_addr + DMAMODE0);
+
+		writel(0x100000, dev->rdk1.plx9054_base_addr + DMALADR0);
+		writel(buf, dev->rdk1.plx9054_base_addr + DMAPADR0);
+		writel(len, dev->rdk1.plx9054_base_addr + DMASIZ0);
+		writel((dir << DIRECTION_OF_TRANSFER) |
+			(1 << INTERRUPT_AFTER_TERMINAL_COUNT),
+			dev->rdk1.plx9054_base_addr + DMADPR0);
+		writel((1 << LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE) |
+			readl(dev->rdk1.plx9054_base_addr + INTCSR),
+			dev->rdk1.plx9054_base_addr + INTCSR);
+
+		break;
+	}
+#endif
+
+	net2272_write(dev, DMAREQ,
+		(0 << DMA_BUFFER_VALID) |
+		(1 << DMA_REQUEST_ENABLE) |
+		(1 << DMA_CONTROL_DACK) |
+		(dev->dma_eot_polarity << EOT_POLARITY) |
+		(dev->dma_dack_polarity << DACK_POLARITY) |
+		(dev->dma_dreq_polarity << DREQ_POLARITY) |
+		((ep >> 1) << DMA_ENDPOINT_SELECT));
+
+	(void) net2272_read(dev, SCRATCH);
+
+	return 0;
+}
+
+static void
+net2272_start_dma(struct net2272 *dev)
+{
+	/* start platform's dma controller */
+#ifdef CONFIG_USB_PCI
+	switch (dev->dev_id) {
+	case PCI_DEVICE_ID_RDK1:
+		writeb((1 << CHANNEL_ENABLE) | (1 << CHANNEL_START),
+			dev->rdk1.plx9054_base_addr + DMACSR0);
+		break;
+	}
+#endif
+}
+
+/* returns 0 on success, else negative errno */
+static int
+net2272_kick_dma(struct net2272_ep *ep, struct net2272_request *req)
+{
+	unsigned size;
+	u8 tmp;
+
+	if (!use_dma || (ep->num < 1) || (ep->num > 2) || !ep->dma)
+		return -EINVAL;
+
+	/* don't use dma for odd-length transfers
+	 * otherwise, we'd need to deal with the last byte with pio
+	 */
+	if (req->req.length & 1)
+		return -EINVAL;
+
+	dev_vdbg(ep->dev->dev, "kick_dma %s req %p dma %08llx\n",
+		ep->ep.name, req, (unsigned long long) req->req.dma);
+
+	net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS);
+
+	/* The NET2272 can only use DMA on one endpoint at a time */
+	if (ep->dev->dma_busy)
+		return -EBUSY;
+
+	/* Make sure we only DMA an even number of bytes (we'll use
+	 * pio to complete the transfer)
+	 */
+	size = req->req.length;
+	size &= ~1;
+
+	/* device-to-host transfer */
+	if (ep->is_in) {
+		/* initialize platform's dma controller */
+		if (net2272_request_dma(ep->dev, ep->num, req->req.dma, size, 0))
+			/* unable to obtain DMA channel; return error and use pio mode */
+			return -EBUSY;
+		req->req.actual += size;
+
+	/* host-to-device transfer */
+	} else {
+		tmp = net2272_ep_read(ep, EP_STAT0);
+
+		/* initialize platform's dma controller */
+		if (net2272_request_dma(ep->dev, ep->num, req->req.dma, size, 1))
+			/* unable to obtain DMA channel; return error and use pio mode */
+			return -EBUSY;
+
+		if (!(tmp & (1 << BUFFER_EMPTY)))
+			ep->not_empty = 1;
+		else
+			ep->not_empty = 0;
+
+
+		/* allow the endpoint's buffer to fill */
+		net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS);
+
+		/* this transfer completed and data's already in the fifo
+		 * return error so pio gets used.
+		 */
+		if (tmp & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)) {
+
+			/* deassert dreq */
+			net2272_write(ep->dev, DMAREQ,
+				(0 << DMA_BUFFER_VALID) |
+				(0 << DMA_REQUEST_ENABLE) |
+				(1 << DMA_CONTROL_DACK) |
+				(ep->dev->dma_eot_polarity << EOT_POLARITY) |
+				(ep->dev->dma_dack_polarity << DACK_POLARITY) |
+				(ep->dev->dma_dreq_polarity << DREQ_POLARITY) |
+				((ep->num >> 1) << DMA_ENDPOINT_SELECT));
+
+			return -EBUSY;
+		}
+	}
+
+	/* Don't use per-packet interrupts: use dma interrupts only */
+	net2272_ep_write(ep, EP_IRQENB, 0);
+
+	net2272_start_dma(ep->dev);
+
+	return 0;
+}
+
+static void net2272_cancel_dma(struct net2272 *dev)
+{
+#ifdef CONFIG_USB_PCI
+	switch (dev->dev_id) {
+	case PCI_DEVICE_ID_RDK1:
+		writeb(0, dev->rdk1.plx9054_base_addr + DMACSR0);
+		writeb(1 << CHANNEL_ABORT, dev->rdk1.plx9054_base_addr + DMACSR0);
+		while (!(readb(dev->rdk1.plx9054_base_addr + DMACSR0) &
+		         (1 << CHANNEL_DONE)))
+			continue;	/* wait for dma to stabalize */
+
+		/* dma abort generates an interrupt */
+		writeb(1 << CHANNEL_CLEAR_INTERRUPT,
+			dev->rdk1.plx9054_base_addr + DMACSR0);
+		break;
+	}
+#endif
+
+	dev->dma_busy = 0;
+}
+
+/*---------------------------------------------------------------------------*/
+
+static int
+net2272_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct net2272_request *req;
+	struct net2272_ep *ep;
+	struct net2272 *dev;
+	unsigned long flags;
+	int status = -1;
+	u8 s;
+
+	req = container_of(_req, struct net2272_request, req);
+	if (!_req || !_req->complete || !_req->buf
+			|| !list_empty(&req->queue))
+		return -EINVAL;
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0))
+		return -EINVAL;
+	dev = ep->dev;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	/* set up dma mapping in case the caller didn't */
+	if (use_dma && ep->dma) {
+		status = usb_gadget_map_request(&dev->gadget, _req,
+				ep->is_in);
+		if (status)
+			return status;
+	}
+
+	dev_vdbg(dev->dev, "%s queue req %p, len %d buf %p dma %08llx %s\n",
+		_ep->name, _req, _req->length, _req->buf,
+		(unsigned long long) _req->dma, _req->zero ? "zero" : "!zero");
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	/* kickstart this i/o queue? */
+	if (list_empty(&ep->queue) && !ep->stopped) {
+		/* maybe there's no control data, just status ack */
+		if (ep->num == 0 && _req->length == 0) {
+			net2272_done(ep, req, 0);
+			dev_vdbg(dev->dev, "%s status ack\n", ep->ep.name);
+			goto done;
+		}
+
+		/* Return zlp, don't let it block subsequent packets */
+		s = net2272_ep_read(ep, EP_STAT0);
+		if (s & (1 << BUFFER_EMPTY)) {
+			/* Buffer is empty check for a blocking zlp, handle it */
+			if ((s & (1 << NAK_OUT_PACKETS)) &&
+			    net2272_ep_read(ep, EP_STAT1) & (1 << LOCAL_OUT_ZLP)) {
+				dev_dbg(dev->dev, "WARNING: returning ZLP short packet termination!\n");
+				/*
+				 * Request is going to terminate with a short packet ...
+				 * hope the client is ready for it!
+				 */
+				status = net2272_read_fifo(ep, req);
+				/* clear short packet naking */
+				net2272_ep_write(ep, EP_STAT0, (1 << NAK_OUT_PACKETS));
+				goto done;
+			}
+		}
+
+		/* try dma first */
+		status = net2272_kick_dma(ep, req);
+
+		if (status < 0) {
+			/* dma failed (most likely in use by another endpoint)
+			 * fallback to pio
+			 */
+			status = 0;
+
+			if (ep->is_in)
+				status = net2272_write_fifo(ep, req);
+			else {
+				s = net2272_ep_read(ep, EP_STAT0);
+				if ((s & (1 << BUFFER_EMPTY)) == 0)
+					status = net2272_read_fifo(ep, req);
+			}
+
+			if (unlikely(status != 0)) {
+				if (status > 0)
+					status = 0;
+				req = NULL;
+			}
+		}
+	}
+	if (likely(req))
+		list_add_tail(&req->queue, &ep->queue);
+
+	if (likely(!list_empty(&ep->queue)))
+		net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS);
+ done:
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+/* dequeue ALL requests */
+static void
+net2272_dequeue_all(struct net2272_ep *ep)
+{
+	struct net2272_request *req;
+
+	/* called with spinlock held */
+	ep->stopped = 1;
+
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next,
+				struct net2272_request,
+				queue);
+		net2272_done(ep, req, -ESHUTDOWN);
+	}
+}
+
+/* dequeue JUST ONE request */
+static int
+net2272_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct net2272_ep *ep;
+	struct net2272_request *req = NULL, *iter;
+	unsigned long flags;
+	int stopped;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0) || !_req)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	stopped = ep->stopped;
+	ep->stopped = 1;
+
+	/* make sure it's still queued on this endpoint */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		req = iter;
+		break;
+	}
+	if (!req) {
+		ep->stopped = stopped;
+		spin_unlock_irqrestore(&ep->dev->lock, flags);
+		return -EINVAL;
+	}
+
+	/* queue head may be partially complete */
+	if (ep->queue.next == &req->queue) {
+		dev_dbg(ep->dev->dev, "unlink (%s) pio\n", _ep->name);
+		net2272_done(ep, req, -ECONNRESET);
+	}
+	ep->stopped = stopped;
+
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+	return 0;
+}
+
+/*---------------------------------------------------------------------------*/
+
+static int
+net2272_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
+{
+	struct net2272_ep *ep;
+	unsigned long flags;
+	int ret = 0;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0))
+		return -EINVAL;
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+	if (ep->desc /* not ep0 */ && usb_endpoint_xfer_isoc(ep->desc))
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	if (!list_empty(&ep->queue))
+		ret = -EAGAIN;
+	else if (ep->is_in && value && net2272_fifo_status(_ep) != 0)
+		ret = -EAGAIN;
+	else {
+		dev_vdbg(ep->dev->dev, "%s %s %s\n", _ep->name,
+			value ? "set" : "clear",
+			wedged ? "wedge" : "halt");
+		/* set/clear */
+		if (value) {
+			if (ep->num == 0)
+				ep->dev->protocol_stall = 1;
+			else
+				set_halt(ep);
+			if (wedged)
+				ep->wedged = 1;
+		} else {
+			clear_halt(ep);
+			ep->wedged = 0;
+		}
+	}
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+
+	return ret;
+}
+
+static int
+net2272_set_halt(struct usb_ep *_ep, int value)
+{
+	return net2272_set_halt_and_wedge(_ep, value, 0);
+}
+
+static int
+net2272_set_wedge(struct usb_ep *_ep)
+{
+	if (!_ep || _ep->name == ep0name)
+		return -EINVAL;
+	return net2272_set_halt_and_wedge(_ep, 1, 1);
+}
+
+static int
+net2272_fifo_status(struct usb_ep *_ep)
+{
+	struct net2272_ep *ep;
+	u16 avail;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0))
+		return -ENODEV;
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	avail = net2272_ep_read(ep, EP_AVAIL1) << 8;
+	avail |= net2272_ep_read(ep, EP_AVAIL0);
+	if (avail > ep->fifo_size)
+		return -EOVERFLOW;
+	if (ep->is_in)
+		avail = ep->fifo_size - avail;
+	return avail;
+}
+
+static void
+net2272_fifo_flush(struct usb_ep *_ep)
+{
+	struct net2272_ep *ep;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0))
+		return;
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return;
+
+	net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH);
+}
+
+static const struct usb_ep_ops net2272_ep_ops = {
+	.enable        = net2272_enable,
+	.disable       = net2272_disable,
+
+	.alloc_request = net2272_alloc_request,
+	.free_request  = net2272_free_request,
+
+	.queue         = net2272_queue,
+	.dequeue       = net2272_dequeue,
+
+	.set_halt      = net2272_set_halt,
+	.set_wedge     = net2272_set_wedge,
+	.fifo_status   = net2272_fifo_status,
+	.fifo_flush    = net2272_fifo_flush,
+};
+
+/*---------------------------------------------------------------------------*/
+
+static int
+net2272_get_frame(struct usb_gadget *_gadget)
+{
+	struct net2272 *dev;
+	unsigned long flags;
+	u16 ret;
+
+	if (!_gadget)
+		return -ENODEV;
+	dev = container_of(_gadget, struct net2272, gadget);
+	spin_lock_irqsave(&dev->lock, flags);
+
+	ret = net2272_read(dev, FRAME1) << 8;
+	ret |= net2272_read(dev, FRAME0);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
+}
+
+static int
+net2272_wakeup(struct usb_gadget *_gadget)
+{
+	struct net2272 *dev;
+	u8 tmp;
+	unsigned long flags;
+
+	if (!_gadget)
+		return 0;
+	dev = container_of(_gadget, struct net2272, gadget);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	tmp = net2272_read(dev, USBCTL0);
+	if (tmp & (1 << IO_WAKEUP_ENABLE))
+		net2272_write(dev, USBCTL1, (1 << GENERATE_RESUME));
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+static int
+net2272_set_selfpowered(struct usb_gadget *_gadget, int value)
+{
+	if (!_gadget)
+		return -ENODEV;
+
+	_gadget->is_selfpowered = (value != 0);
+
+	return 0;
+}
+
+static int
+net2272_pullup(struct usb_gadget *_gadget, int is_on)
+{
+	struct net2272 *dev;
+	u8 tmp;
+	unsigned long flags;
+
+	if (!_gadget)
+		return -ENODEV;
+	dev = container_of(_gadget, struct net2272, gadget);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	tmp = net2272_read(dev, USBCTL0);
+	dev->softconnect = (is_on != 0);
+	if (is_on)
+		tmp |= (1 << USB_DETECT_ENABLE);
+	else
+		tmp &= ~(1 << USB_DETECT_ENABLE);
+	net2272_write(dev, USBCTL0, tmp);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+static int net2272_start(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver);
+static int net2272_stop(struct usb_gadget *_gadget);
+static void net2272_async_callbacks(struct usb_gadget *_gadget, bool enable);
+
+static const struct usb_gadget_ops net2272_ops = {
+	.get_frame	= net2272_get_frame,
+	.wakeup		= net2272_wakeup,
+	.set_selfpowered = net2272_set_selfpowered,
+	.pullup		= net2272_pullup,
+	.udc_start	= net2272_start,
+	.udc_stop	= net2272_stop,
+	.udc_async_callbacks = net2272_async_callbacks,
+};
+
+/*---------------------------------------------------------------------------*/
+
+static ssize_t
+registers_show(struct device *_dev, struct device_attribute *attr, char *buf)
+{
+	struct net2272 *dev;
+	char *next;
+	unsigned size, t;
+	unsigned long flags;
+	u8 t1, t2;
+	int i;
+	const char *s;
+
+	dev = dev_get_drvdata(_dev);
+	next = buf;
+	size = PAGE_SIZE;
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* Main Control Registers */
+	t = scnprintf(next, size, "%s version %s,"
+		"chiprev %02x, locctl %02x\n"
+		"irqenb0 %02x irqenb1 %02x "
+		"irqstat0 %02x irqstat1 %02x\n",
+		driver_name, driver_vers, dev->chiprev,
+		net2272_read(dev, LOCCTL),
+		net2272_read(dev, IRQENB0),
+		net2272_read(dev, IRQENB1),
+		net2272_read(dev, IRQSTAT0),
+		net2272_read(dev, IRQSTAT1));
+	size -= t;
+	next += t;
+
+	/* DMA */
+	t1 = net2272_read(dev, DMAREQ);
+	t = scnprintf(next, size, "\ndmareq %02x: %s %s%s%s%s\n",
+		t1, ep_name[(t1 & 0x01) + 1],
+		t1 & (1 << DMA_CONTROL_DACK) ? "dack " : "",
+		t1 & (1 << DMA_REQUEST_ENABLE) ? "reqenb " : "",
+		t1 & (1 << DMA_REQUEST) ? "req " : "",
+		t1 & (1 << DMA_BUFFER_VALID) ? "valid " : "");
+	size -= t;
+	next += t;
+
+	/* USB Control Registers */
+	t1 = net2272_read(dev, USBCTL1);
+	if (t1 & (1 << VBUS_PIN)) {
+		if (t1 & (1 << USB_HIGH_SPEED))
+			s = "high speed";
+		else if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+			s = "powered";
+		else
+			s = "full speed";
+	} else
+		s = "not attached";
+	t = scnprintf(next, size,
+		"usbctl0 %02x usbctl1 %02x addr 0x%02x (%s)\n",
+		net2272_read(dev, USBCTL0), t1,
+		net2272_read(dev, OURADDR), s);
+	size -= t;
+	next += t;
+
+	/* Endpoint Registers */
+	for (i = 0; i < 4; ++i) {
+		struct net2272_ep *ep;
+
+		ep = &dev->ep[i];
+		if (i && !ep->desc)
+			continue;
+
+		t1 = net2272_ep_read(ep, EP_CFG);
+		t2 = net2272_ep_read(ep, EP_RSPSET);
+		t = scnprintf(next, size,
+			"\n%s\tcfg %02x rsp (%02x) %s%s%s%s%s%s%s%s"
+			"irqenb %02x\n",
+			ep->ep.name, t1, t2,
+			(t2 & (1 << ALT_NAK_OUT_PACKETS)) ? "NAK " : "",
+			(t2 & (1 << HIDE_STATUS_PHASE)) ? "hide " : "",
+			(t2 & (1 << AUTOVALIDATE)) ? "auto " : "",
+			(t2 & (1 << INTERRUPT_MODE)) ? "interrupt " : "",
+			(t2 & (1 << CONTROL_STATUS_PHASE_HANDSHAKE)) ? "status " : "",
+			(t2 & (1 << NAK_OUT_PACKETS_MODE)) ? "NAKmode " : "",
+			(t2 & (1 << ENDPOINT_TOGGLE)) ? "DATA1 " : "DATA0 ",
+			(t2 & (1 << ENDPOINT_HALT)) ? "HALT " : "",
+			net2272_ep_read(ep, EP_IRQENB));
+		size -= t;
+		next += t;
+
+		t = scnprintf(next, size,
+			"\tstat0 %02x stat1 %02x avail %04x "
+			"(ep%d%s-%s)%s\n",
+			net2272_ep_read(ep, EP_STAT0),
+			net2272_ep_read(ep, EP_STAT1),
+			(net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0),
+			t1 & 0x0f,
+			ep->is_in ? "in" : "out",
+			type_string(t1 >> 5),
+			ep->stopped ? "*" : "");
+		size -= t;
+		next += t;
+
+		t = scnprintf(next, size,
+			"\tep_transfer %06x\n",
+			((net2272_ep_read(ep, EP_TRANSFER2) & 0xff) << 16) |
+			((net2272_ep_read(ep, EP_TRANSFER1) & 0xff) << 8) |
+			((net2272_ep_read(ep, EP_TRANSFER0) & 0xff)));
+		size -= t;
+		next += t;
+
+		t1 = net2272_ep_read(ep, EP_BUFF_STATES) & 0x03;
+		t2 = (net2272_ep_read(ep, EP_BUFF_STATES) >> 2) & 0x03;
+		t = scnprintf(next, size,
+			"\tbuf-a %s buf-b %s\n",
+			buf_state_string(t1),
+			buf_state_string(t2));
+		size -= t;
+		next += t;
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return PAGE_SIZE - size;
+}
+static DEVICE_ATTR_RO(registers);
+
+/*---------------------------------------------------------------------------*/
+
+static void
+net2272_set_fifo_mode(struct net2272 *dev, int mode)
+{
+	u8 tmp;
+
+	tmp = net2272_read(dev, LOCCTL) & 0x3f;
+	tmp |= (mode << 6);
+	net2272_write(dev, LOCCTL, tmp);
+
+	INIT_LIST_HEAD(&dev->gadget.ep_list);
+
+	/* always ep-a, ep-c ... maybe not ep-b */
+	list_add_tail(&dev->ep[1].ep.ep_list, &dev->gadget.ep_list);
+
+	switch (mode) {
+	case 0:
+		list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list);
+		dev->ep[1].fifo_size = dev->ep[2].fifo_size = 512;
+		break;
+	case 1:
+		list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list);
+		dev->ep[1].fifo_size = 1024;
+		dev->ep[2].fifo_size = 512;
+		break;
+	case 2:
+		list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list);
+		dev->ep[1].fifo_size = dev->ep[2].fifo_size = 1024;
+		break;
+	case 3:
+		dev->ep[1].fifo_size = 1024;
+		break;
+	}
+
+	/* ep-c is always 2 512 byte buffers */
+	list_add_tail(&dev->ep[3].ep.ep_list, &dev->gadget.ep_list);
+	dev->ep[3].fifo_size = 512;
+}
+
+/*---------------------------------------------------------------------------*/
+
+static void
+net2272_usb_reset(struct net2272 *dev)
+{
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+
+	net2272_cancel_dma(dev);
+
+	net2272_write(dev, IRQENB0, 0);
+	net2272_write(dev, IRQENB1, 0);
+
+	/* clear irq state */
+	net2272_write(dev, IRQSTAT0, 0xff);
+	net2272_write(dev, IRQSTAT1, ~(1 << SUSPEND_REQUEST_INTERRUPT));
+
+	net2272_write(dev, DMAREQ,
+		(0 << DMA_BUFFER_VALID) |
+		(0 << DMA_REQUEST_ENABLE) |
+		(1 << DMA_CONTROL_DACK) |
+		(dev->dma_eot_polarity << EOT_POLARITY) |
+		(dev->dma_dack_polarity << DACK_POLARITY) |
+		(dev->dma_dreq_polarity << DREQ_POLARITY) |
+		((dma_ep >> 1) << DMA_ENDPOINT_SELECT));
+
+	net2272_cancel_dma(dev);
+	net2272_set_fifo_mode(dev, (fifo_mode <= 3) ? fifo_mode : 0);
+
+	/* Set the NET2272 ep fifo data width to 16-bit mode and for correct byte swapping
+	 * note that the higher level gadget drivers are expected to convert data to little endian.
+	 * Enable byte swap for your local bus/cpu if needed by setting BYTE_SWAP in LOCCTL here
+	 */
+	net2272_write(dev, LOCCTL, net2272_read(dev, LOCCTL) | (1 << DATA_WIDTH));
+	net2272_write(dev, LOCCTL1, (dma_mode << DMA_MODE));
+}
+
+static void
+net2272_usb_reinit(struct net2272 *dev)
+{
+	int i;
+
+	/* basic endpoint init */
+	for (i = 0; i < 4; ++i) {
+		struct net2272_ep *ep = &dev->ep[i];
+
+		ep->ep.name = ep_name[i];
+		ep->dev = dev;
+		ep->num = i;
+		ep->not_empty = 0;
+
+		if (use_dma && ep->num == dma_ep)
+			ep->dma = 1;
+
+		if (i > 0 && i <= 3)
+			ep->fifo_size = 512;
+		else
+			ep->fifo_size = 64;
+		net2272_ep_reset(ep);
+
+		if (i == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
+	}
+	usb_ep_set_maxpacket_limit(&dev->ep[0].ep, 64);
+
+	dev->gadget.ep0 = &dev->ep[0].ep;
+	dev->ep[0].stopped = 0;
+	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+}
+
+static void
+net2272_ep0_start(struct net2272 *dev)
+{
+	struct net2272_ep *ep0 = &dev->ep[0];
+
+	net2272_ep_write(ep0, EP_RSPSET,
+		(1 << NAK_OUT_PACKETS_MODE) |
+		(1 << ALT_NAK_OUT_PACKETS));
+	net2272_ep_write(ep0, EP_RSPCLR,
+		(1 << HIDE_STATUS_PHASE) |
+		(1 << CONTROL_STATUS_PHASE_HANDSHAKE));
+	net2272_write(dev, USBCTL0,
+		(dev->softconnect << USB_DETECT_ENABLE) |
+		(1 << USB_ROOT_PORT_WAKEUP_ENABLE) |
+		(1 << IO_WAKEUP_ENABLE));
+	net2272_write(dev, IRQENB0,
+		(1 << SETUP_PACKET_INTERRUPT_ENABLE) |
+		(1 << ENDPOINT_0_INTERRUPT_ENABLE) |
+		(1 << DMA_DONE_INTERRUPT_ENABLE));
+	net2272_write(dev, IRQENB1,
+		(1 << VBUS_INTERRUPT_ENABLE) |
+		(1 << ROOT_PORT_RESET_INTERRUPT_ENABLE) |
+		(1 << SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE));
+}
+
+/* when a driver is successfully registered, it will receive
+ * control requests including set_configuration(), which enables
+ * non-control requests.  then usb traffic follows until a
+ * disconnect is reported.  then a host may connect again, or
+ * the driver might get unbound.
+ */
+static int net2272_start(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct net2272 *dev;
+	unsigned i;
+
+	if (!driver || !driver->setup ||
+	    driver->max_speed != USB_SPEED_HIGH)
+		return -EINVAL;
+
+	dev = container_of(_gadget, struct net2272, gadget);
+
+	for (i = 0; i < 4; ++i)
+		dev->ep[i].irqs = 0;
+	/* hook up the driver ... */
+	dev->softconnect = 1;
+	dev->driver = driver;
+
+	/* ... then enable host detection and ep0; and we're ready
+	 * for set_configuration as well as eventual disconnect.
+	 */
+	net2272_ep0_start(dev);
+
+	return 0;
+}
+
+static void
+stop_activity(struct net2272 *dev, struct usb_gadget_driver *driver)
+{
+	int i;
+
+	/* don't disconnect if it's not connected */
+	if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+
+	/* stop hardware; prevent new request submissions;
+	 * and kill any outstanding requests.
+	 */
+	net2272_usb_reset(dev);
+	for (i = 0; i < 4; ++i)
+		net2272_dequeue_all(&dev->ep[i]);
+
+	/* report disconnect; the driver is already quiesced */
+	if (dev->async_callbacks && driver) {
+		spin_unlock(&dev->lock);
+		driver->disconnect(&dev->gadget);
+		spin_lock(&dev->lock);
+	}
+
+	net2272_usb_reinit(dev);
+}
+
+static int net2272_stop(struct usb_gadget *_gadget)
+{
+	struct net2272 *dev;
+	unsigned long flags;
+
+	dev = container_of(_gadget, struct net2272, gadget);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	stop_activity(dev, NULL);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	dev->driver = NULL;
+
+	return 0;
+}
+
+static void net2272_async_callbacks(struct usb_gadget *_gadget, bool enable)
+{
+	struct net2272	*dev = container_of(_gadget, struct net2272, gadget);
+
+	spin_lock_irq(&dev->lock);
+	dev->async_callbacks = enable;
+	spin_unlock_irq(&dev->lock);
+}
+
+/*---------------------------------------------------------------------------*/
+/* handle ep-a/ep-b dma completions */
+static void
+net2272_handle_dma(struct net2272_ep *ep)
+{
+	struct net2272_request *req;
+	unsigned len;
+	int status;
+
+	if (!list_empty(&ep->queue))
+		req = list_entry(ep->queue.next,
+				struct net2272_request, queue);
+	else
+		req = NULL;
+
+	dev_vdbg(ep->dev->dev, "handle_dma %s req %p\n", ep->ep.name, req);
+
+	/* Ensure DREQ is de-asserted */
+	net2272_write(ep->dev, DMAREQ,
+		(0 << DMA_BUFFER_VALID)
+	      | (0 << DMA_REQUEST_ENABLE)
+	      | (1 << DMA_CONTROL_DACK)
+	      | (ep->dev->dma_eot_polarity << EOT_POLARITY)
+	      | (ep->dev->dma_dack_polarity << DACK_POLARITY)
+	      | (ep->dev->dma_dreq_polarity << DREQ_POLARITY)
+	      | (ep->dma << DMA_ENDPOINT_SELECT));
+
+	ep->dev->dma_busy = 0;
+
+	net2272_ep_write(ep, EP_IRQENB,
+		  (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
+		| (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)
+		| net2272_ep_read(ep, EP_IRQENB));
+
+	/* device-to-host transfer completed */
+	if (ep->is_in) {
+		/* validate a short packet or zlp if necessary */
+		if ((req->req.length % ep->ep.maxpacket != 0) ||
+				req->req.zero)
+			set_fifo_bytecount(ep, 0);
+
+		net2272_done(ep, req, 0);
+		if (!list_empty(&ep->queue)) {
+			req = list_entry(ep->queue.next,
+					struct net2272_request, queue);
+			status = net2272_kick_dma(ep, req);
+			if (status < 0)
+				net2272_pio_advance(ep);
+		}
+
+	/* host-to-device transfer completed */
+	} else {
+		/* terminated with a short packet? */
+		if (net2272_read(ep->dev, IRQSTAT0) &
+				(1 << DMA_DONE_INTERRUPT)) {
+			/* abort system dma */
+			net2272_cancel_dma(ep->dev);
+		}
+
+		/* EP_TRANSFER will contain the number of bytes
+		 * actually received.
+		 * NOTE: There is no overflow detection on EP_TRANSFER:
+		 * We can't deal with transfers larger than 2^24 bytes!
+		 */
+		len = (net2272_ep_read(ep, EP_TRANSFER2) << 16)
+			| (net2272_ep_read(ep, EP_TRANSFER1) << 8)
+			| (net2272_ep_read(ep, EP_TRANSFER0));
+
+		if (ep->not_empty)
+			len += 4;
+
+		req->req.actual += len;
+
+		/* get any remaining data */
+		net2272_pio_advance(ep);
+	}
+}
+
+/*---------------------------------------------------------------------------*/
+
+static void
+net2272_handle_ep(struct net2272_ep *ep)
+{
+	struct net2272_request *req;
+	u8 stat0, stat1;
+
+	if (!list_empty(&ep->queue))
+		req = list_entry(ep->queue.next,
+			struct net2272_request, queue);
+	else
+		req = NULL;
+
+	/* ack all, and handle what we care about */
+	stat0 = net2272_ep_read(ep, EP_STAT0);
+	stat1 = net2272_ep_read(ep, EP_STAT1);
+	ep->irqs++;
+
+	dev_vdbg(ep->dev->dev, "%s ack ep_stat0 %02x, ep_stat1 %02x, req %p\n",
+		ep->ep.name, stat0, stat1, req ? &req->req : NULL);
+
+	net2272_ep_write(ep, EP_STAT0, stat0 &
+		~((1 << NAK_OUT_PACKETS)
+		| (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)));
+	net2272_ep_write(ep, EP_STAT1, stat1);
+
+	/* data packet(s) received (in the fifo, OUT)
+	 * direction must be validated, otherwise control read status phase
+	 * could be interpreted as a valid packet
+	 */
+	if (!ep->is_in && (stat0 & (1 << DATA_PACKET_RECEIVED_INTERRUPT)))
+		net2272_pio_advance(ep);
+	/* data packet(s) transmitted (IN) */
+	else if (stat0 & (1 << DATA_PACKET_TRANSMITTED_INTERRUPT))
+		net2272_pio_advance(ep);
+}
+
+static struct net2272_ep *
+net2272_get_ep_by_addr(struct net2272 *dev, u16 wIndex)
+{
+	struct net2272_ep *ep;
+
+	if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
+		return &dev->ep[0];
+
+	list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
+		u8 bEndpointAddress;
+
+		if (!ep->desc)
+			continue;
+		bEndpointAddress = ep->desc->bEndpointAddress;
+		if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
+			continue;
+		if ((wIndex & 0x0f) == (bEndpointAddress & 0x0f))
+			return ep;
+	}
+	return NULL;
+}
+
+/*
+ * USB Test Packet:
+ * JKJKJKJK * 9
+ * JJKKJJKK * 8
+ * JJJJKKKK * 8
+ * JJJJJJJKKKKKKK * 8
+ * JJJJJJJK * 8
+ * {JKKKKKKK * 10}, JK
+ */
+static const u8 net2272_test_packet[] = {
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
+	0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
+	0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
+	0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFD, 0x7E
+};
+
+static void
+net2272_set_test_mode(struct net2272 *dev, int mode)
+{
+	int i;
+
+	/* Disable all net2272 interrupts:
+	 * Nothing but a power cycle should stop the test.
+	 */
+	net2272_write(dev, IRQENB0, 0x00);
+	net2272_write(dev, IRQENB1, 0x00);
+
+	/* Force tranceiver to high-speed */
+	net2272_write(dev, XCVRDIAG, 1 << FORCE_HIGH_SPEED);
+
+	net2272_write(dev, PAGESEL, 0);
+	net2272_write(dev, EP_STAT0, 1 << DATA_PACKET_TRANSMITTED_INTERRUPT);
+	net2272_write(dev, EP_RSPCLR,
+			  (1 << CONTROL_STATUS_PHASE_HANDSHAKE)
+			| (1 << HIDE_STATUS_PHASE));
+	net2272_write(dev, EP_CFG, 1 << ENDPOINT_DIRECTION);
+	net2272_write(dev, EP_STAT1, 1 << BUFFER_FLUSH);
+
+	/* wait for status phase to complete */
+	while (!(net2272_read(dev, EP_STAT0) &
+				(1 << DATA_PACKET_TRANSMITTED_INTERRUPT)))
+		;
+
+	/* Enable test mode */
+	net2272_write(dev, USBTEST, mode);
+
+	/* load test packet */
+	if (mode == USB_TEST_PACKET) {
+		/* switch to 8 bit mode */
+		net2272_write(dev, LOCCTL, net2272_read(dev, LOCCTL) &
+				~(1 << DATA_WIDTH));
+
+		for (i = 0; i < sizeof(net2272_test_packet); ++i)
+			net2272_write(dev, EP_DATA, net2272_test_packet[i]);
+
+		/* Validate test packet */
+		net2272_write(dev, EP_TRANSFER0, 0);
+	}
+}
+
+static void
+net2272_handle_stat0_irqs(struct net2272 *dev, u8 stat)
+{
+	struct net2272_ep *ep;
+	u8 num, scratch;
+
+	/* starting a control request? */
+	if (unlikely(stat & (1 << SETUP_PACKET_INTERRUPT))) {
+		union {
+			u8 raw[8];
+			struct usb_ctrlrequest	r;
+		} u;
+		int tmp = 0;
+		struct net2272_request *req;
+
+		if (dev->gadget.speed == USB_SPEED_UNKNOWN) {
+			if (net2272_read(dev, USBCTL1) & (1 << USB_HIGH_SPEED))
+				dev->gadget.speed = USB_SPEED_HIGH;
+			else
+				dev->gadget.speed = USB_SPEED_FULL;
+			dev_dbg(dev->dev, "%s\n",
+				usb_speed_string(dev->gadget.speed));
+		}
+
+		ep = &dev->ep[0];
+		ep->irqs++;
+
+		/* make sure any leftover interrupt state is cleared */
+		stat &= ~(1 << ENDPOINT_0_INTERRUPT);
+		while (!list_empty(&ep->queue)) {
+			req = list_entry(ep->queue.next,
+				struct net2272_request, queue);
+			net2272_done(ep, req,
+				(req->req.actual == req->req.length) ? 0 : -EPROTO);
+		}
+		ep->stopped = 0;
+		dev->protocol_stall = 0;
+		net2272_ep_write(ep, EP_STAT0,
+			    (1 << DATA_IN_TOKEN_INTERRUPT)
+			  | (1 << DATA_OUT_TOKEN_INTERRUPT)
+			  | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)
+			  | (1 << DATA_PACKET_RECEIVED_INTERRUPT)
+			  | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT));
+		net2272_ep_write(ep, EP_STAT1,
+			    (1 << TIMEOUT)
+			  | (1 << USB_OUT_ACK_SENT)
+			  | (1 << USB_OUT_NAK_SENT)
+			  | (1 << USB_IN_ACK_RCVD)
+			  | (1 << USB_IN_NAK_SENT)
+			  | (1 << USB_STALL_SENT)
+			  | (1 << LOCAL_OUT_ZLP));
+
+		/*
+		 * Ensure Control Read pre-validation setting is beyond maximum size
+		 *  - Control Writes can leave non-zero values in EP_TRANSFER. If
+		 *    an EP0 transfer following the Control Write is a Control Read,
+		 *    the NET2272 sees the non-zero EP_TRANSFER as an unexpected
+		 *    pre-validation count.
+		 *  - Setting EP_TRANSFER beyond the maximum EP0 transfer size ensures
+		 *    the pre-validation count cannot cause an unexpected validatation
+		 */
+		net2272_write(dev, PAGESEL, 0);
+		net2272_write(dev, EP_TRANSFER2, 0xff);
+		net2272_write(dev, EP_TRANSFER1, 0xff);
+		net2272_write(dev, EP_TRANSFER0, 0xff);
+
+		u.raw[0] = net2272_read(dev, SETUP0);
+		u.raw[1] = net2272_read(dev, SETUP1);
+		u.raw[2] = net2272_read(dev, SETUP2);
+		u.raw[3] = net2272_read(dev, SETUP3);
+		u.raw[4] = net2272_read(dev, SETUP4);
+		u.raw[5] = net2272_read(dev, SETUP5);
+		u.raw[6] = net2272_read(dev, SETUP6);
+		u.raw[7] = net2272_read(dev, SETUP7);
+		/*
+		 * If you have a big endian cpu make sure le16_to_cpus
+		 * performs the proper byte swapping here...
+		 */
+		le16_to_cpus(&u.r.wValue);
+		le16_to_cpus(&u.r.wIndex);
+		le16_to_cpus(&u.r.wLength);
+
+		/* ack the irq */
+		net2272_write(dev, IRQSTAT0, 1 << SETUP_PACKET_INTERRUPT);
+		stat ^= (1 << SETUP_PACKET_INTERRUPT);
+
+		/* watch control traffic at the token level, and force
+		 * synchronization before letting the status phase happen.
+		 */
+		ep->is_in = (u.r.bRequestType & USB_DIR_IN) != 0;
+		if (ep->is_in) {
+			scratch = (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)
+				| (1 << DATA_OUT_TOKEN_INTERRUPT_ENABLE)
+				| (1 << DATA_IN_TOKEN_INTERRUPT_ENABLE);
+			stop_out_naking(ep);
+		} else
+			scratch = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
+				| (1 << DATA_OUT_TOKEN_INTERRUPT_ENABLE)
+				| (1 << DATA_IN_TOKEN_INTERRUPT_ENABLE);
+		net2272_ep_write(ep, EP_IRQENB, scratch);
+
+		if ((u.r.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD)
+			goto delegate;
+		switch (u.r.bRequest) {
+		case USB_REQ_GET_STATUS: {
+			struct net2272_ep *e;
+			u16 status = 0;
+
+			switch (u.r.bRequestType & USB_RECIP_MASK) {
+			case USB_RECIP_ENDPOINT:
+				e = net2272_get_ep_by_addr(dev, u.r.wIndex);
+				if (!e || u.r.wLength > 2)
+					goto do_stall;
+				if (net2272_ep_read(e, EP_RSPSET) & (1 << ENDPOINT_HALT))
+					status = cpu_to_le16(1);
+				else
+					status = cpu_to_le16(0);
+
+				/* don't bother with a request object! */
+				net2272_ep_write(&dev->ep[0], EP_IRQENB, 0);
+				writew(status, net2272_reg_addr(dev, EP_DATA));
+				set_fifo_bytecount(&dev->ep[0], 0);
+				allow_status(ep);
+				dev_vdbg(dev->dev, "%s stat %02x\n",
+					ep->ep.name, status);
+				goto next_endpoints;
+			case USB_RECIP_DEVICE:
+				if (u.r.wLength > 2)
+					goto do_stall;
+				if (dev->gadget.is_selfpowered)
+					status = (1 << USB_DEVICE_SELF_POWERED);
+
+				/* don't bother with a request object! */
+				net2272_ep_write(&dev->ep[0], EP_IRQENB, 0);
+				writew(status, net2272_reg_addr(dev, EP_DATA));
+				set_fifo_bytecount(&dev->ep[0], 0);
+				allow_status(ep);
+				dev_vdbg(dev->dev, "device stat %02x\n", status);
+				goto next_endpoints;
+			case USB_RECIP_INTERFACE:
+				if (u.r.wLength > 2)
+					goto do_stall;
+
+				/* don't bother with a request object! */
+				net2272_ep_write(&dev->ep[0], EP_IRQENB, 0);
+				writew(status, net2272_reg_addr(dev, EP_DATA));
+				set_fifo_bytecount(&dev->ep[0], 0);
+				allow_status(ep);
+				dev_vdbg(dev->dev, "interface status %02x\n", status);
+				goto next_endpoints;
+			}
+
+			break;
+		}
+		case USB_REQ_CLEAR_FEATURE: {
+			struct net2272_ep *e;
+
+			if (u.r.bRequestType != USB_RECIP_ENDPOINT)
+				goto delegate;
+			if (u.r.wValue != USB_ENDPOINT_HALT ||
+			    u.r.wLength != 0)
+				goto do_stall;
+			e = net2272_get_ep_by_addr(dev, u.r.wIndex);
+			if (!e)
+				goto do_stall;
+			if (e->wedged) {
+				dev_vdbg(dev->dev, "%s wedged, halt not cleared\n",
+					ep->ep.name);
+			} else {
+				dev_vdbg(dev->dev, "%s clear halt\n", ep->ep.name);
+				clear_halt(e);
+			}
+			allow_status(ep);
+			goto next_endpoints;
+		}
+		case USB_REQ_SET_FEATURE: {
+			struct net2272_ep *e;
+
+			if (u.r.bRequestType == USB_RECIP_DEVICE) {
+				if (u.r.wIndex != NORMAL_OPERATION)
+					net2272_set_test_mode(dev, (u.r.wIndex >> 8));
+				allow_status(ep);
+				dev_vdbg(dev->dev, "test mode: %d\n", u.r.wIndex);
+				goto next_endpoints;
+			} else if (u.r.bRequestType != USB_RECIP_ENDPOINT)
+				goto delegate;
+			if (u.r.wValue != USB_ENDPOINT_HALT ||
+			    u.r.wLength != 0)
+				goto do_stall;
+			e = net2272_get_ep_by_addr(dev, u.r.wIndex);
+			if (!e)
+				goto do_stall;
+			set_halt(e);
+			allow_status(ep);
+			dev_vdbg(dev->dev, "%s set halt\n", ep->ep.name);
+			goto next_endpoints;
+		}
+		case USB_REQ_SET_ADDRESS: {
+			net2272_write(dev, OURADDR, u.r.wValue & 0xff);
+			allow_status(ep);
+			break;
+		}
+		default:
+ delegate:
+			dev_vdbg(dev->dev, "setup %02x.%02x v%04x i%04x "
+				"ep_cfg %08x\n",
+				u.r.bRequestType, u.r.bRequest,
+				u.r.wValue, u.r.wIndex,
+				net2272_ep_read(ep, EP_CFG));
+			if (dev->async_callbacks) {
+				spin_unlock(&dev->lock);
+				tmp = dev->driver->setup(&dev->gadget, &u.r);
+				spin_lock(&dev->lock);
+			}
+		}
+
+		/* stall ep0 on error */
+		if (tmp < 0) {
+ do_stall:
+			dev_vdbg(dev->dev, "req %02x.%02x protocol STALL; stat %d\n",
+				u.r.bRequestType, u.r.bRequest, tmp);
+			dev->protocol_stall = 1;
+		}
+	/* endpoint dma irq? */
+	} else if (stat & (1 << DMA_DONE_INTERRUPT)) {
+		net2272_cancel_dma(dev);
+		net2272_write(dev, IRQSTAT0, 1 << DMA_DONE_INTERRUPT);
+		stat &= ~(1 << DMA_DONE_INTERRUPT);
+		num = (net2272_read(dev, DMAREQ) & (1 << DMA_ENDPOINT_SELECT))
+			? 2 : 1;
+
+		ep = &dev->ep[num];
+		net2272_handle_dma(ep);
+	}
+
+ next_endpoints:
+	/* endpoint data irq? */
+	scratch = stat & 0x0f;
+	stat &= ~0x0f;
+	for (num = 0; scratch; num++) {
+		u8 t;
+
+		/* does this endpoint's FIFO and queue need tending? */
+		t = 1 << num;
+		if ((scratch & t) == 0)
+			continue;
+		scratch ^= t;
+
+		ep = &dev->ep[num];
+		net2272_handle_ep(ep);
+	}
+
+	/* some interrupts we can just ignore */
+	stat &= ~(1 << SOF_INTERRUPT);
+
+	if (stat)
+		dev_dbg(dev->dev, "unhandled irqstat0 %02x\n", stat);
+}
+
+static void
+net2272_handle_stat1_irqs(struct net2272 *dev, u8 stat)
+{
+	u8 tmp, mask;
+
+	/* after disconnect there's nothing else to do! */
+	tmp = (1 << VBUS_INTERRUPT) | (1 << ROOT_PORT_RESET_INTERRUPT);
+	mask = (1 << USB_HIGH_SPEED) | (1 << USB_FULL_SPEED);
+
+	if (stat & tmp) {
+		bool	reset = false;
+		bool	disconnect = false;
+
+		/*
+		 * Ignore disconnects and resets if the speed hasn't been set.
+		 * VBUS can bounce and there's always an initial reset.
+		 */
+		net2272_write(dev, IRQSTAT1, tmp);
+		if (dev->gadget.speed != USB_SPEED_UNKNOWN) {
+			if ((stat & (1 << VBUS_INTERRUPT)) &&
+					(net2272_read(dev, USBCTL1) &
+						(1 << VBUS_PIN)) == 0) {
+				disconnect = true;
+				dev_dbg(dev->dev, "disconnect %s\n",
+					dev->driver->driver.name);
+			} else if ((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) &&
+					(net2272_read(dev, USBCTL1) & mask)
+						== 0) {
+				reset = true;
+				dev_dbg(dev->dev, "reset %s\n",
+					dev->driver->driver.name);
+			}
+
+			if (disconnect || reset) {
+				stop_activity(dev, dev->driver);
+				net2272_ep0_start(dev);
+				if (dev->async_callbacks) {
+					spin_unlock(&dev->lock);
+					if (reset)
+						usb_gadget_udc_reset(&dev->gadget, dev->driver);
+					else
+						(dev->driver->disconnect)(&dev->gadget);
+					spin_lock(&dev->lock);
+				}
+				return;
+			}
+		}
+		stat &= ~tmp;
+
+		if (!stat)
+			return;
+	}
+
+	tmp = (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT);
+	if (stat & tmp) {
+		net2272_write(dev, IRQSTAT1, tmp);
+		if (stat & (1 << SUSPEND_REQUEST_INTERRUPT)) {
+			if (dev->async_callbacks && dev->driver->suspend)
+				dev->driver->suspend(&dev->gadget);
+			if (!enable_suspend) {
+				stat &= ~(1 << SUSPEND_REQUEST_INTERRUPT);
+				dev_dbg(dev->dev, "Suspend disabled, ignoring\n");
+			}
+		} else {
+			if (dev->async_callbacks && dev->driver->resume)
+				dev->driver->resume(&dev->gadget);
+		}
+		stat &= ~tmp;
+	}
+
+	/* clear any other status/irqs */
+	if (stat)
+		net2272_write(dev, IRQSTAT1, stat);
+
+	/* some status we can just ignore */
+	stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
+			| (1 << SUSPEND_REQUEST_INTERRUPT)
+			| (1 << RESUME_INTERRUPT));
+	if (!stat)
+		return;
+	else
+		dev_dbg(dev->dev, "unhandled irqstat1 %02x\n", stat);
+}
+
+static irqreturn_t net2272_irq(int irq, void *_dev)
+{
+	struct net2272 *dev = _dev;
+#if defined(PLX_PCI_RDK) || defined(PLX_PCI_RDK2)
+	u32 intcsr;
+#endif
+#if defined(PLX_PCI_RDK)
+	u8 dmareq;
+#endif
+	spin_lock(&dev->lock);
+#if defined(PLX_PCI_RDK)
+	intcsr = readl(dev->rdk1.plx9054_base_addr + INTCSR);
+
+	if ((intcsr & LOCAL_INTERRUPT_TEST) == LOCAL_INTERRUPT_TEST) {
+		writel(intcsr & ~(1 << PCI_INTERRUPT_ENABLE),
+				dev->rdk1.plx9054_base_addr + INTCSR);
+		net2272_handle_stat1_irqs(dev, net2272_read(dev, IRQSTAT1));
+		net2272_handle_stat0_irqs(dev, net2272_read(dev, IRQSTAT0));
+		intcsr = readl(dev->rdk1.plx9054_base_addr + INTCSR);
+		writel(intcsr | (1 << PCI_INTERRUPT_ENABLE),
+			dev->rdk1.plx9054_base_addr + INTCSR);
+	}
+	if ((intcsr & DMA_CHANNEL_0_TEST) == DMA_CHANNEL_0_TEST) {
+		writeb((1 << CHANNEL_CLEAR_INTERRUPT | (0 << CHANNEL_ENABLE)),
+				dev->rdk1.plx9054_base_addr + DMACSR0);
+
+		dmareq = net2272_read(dev, DMAREQ);
+		if (dmareq & 0x01)
+			net2272_handle_dma(&dev->ep[2]);
+		else
+			net2272_handle_dma(&dev->ep[1]);
+	}
+#endif
+#if defined(PLX_PCI_RDK2)
+	/* see if PCI int for us by checking irqstat */
+	intcsr = readl(dev->rdk2.fpga_base_addr + RDK2_IRQSTAT);
+	if (!(intcsr & (1 << NET2272_PCI_IRQ))) {
+		spin_unlock(&dev->lock);
+		return IRQ_NONE;
+	}
+	/* check dma interrupts */
+#endif
+	/* Platform/devcice interrupt handler */
+#if !defined(PLX_PCI_RDK)
+	net2272_handle_stat1_irqs(dev, net2272_read(dev, IRQSTAT1));
+	net2272_handle_stat0_irqs(dev, net2272_read(dev, IRQSTAT0));
+#endif
+	spin_unlock(&dev->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int net2272_present(struct net2272 *dev)
+{
+	/*
+	 * Quick test to see if CPU can communicate properly with the NET2272.
+	 * Verifies connection using writes and reads to write/read and
+	 * read-only registers.
+	 *
+	 * This routine is strongly recommended especially during early bring-up
+	 * of new hardware, however for designs that do not apply Power On System
+	 * Tests (POST) it may discarded (or perhaps minimized).
+	 */
+	unsigned int ii;
+	u8 val, refval;
+
+	/* Verify NET2272 write/read SCRATCH register can write and read */
+	refval = net2272_read(dev, SCRATCH);
+	for (ii = 0; ii < 0x100; ii += 7) {
+		net2272_write(dev, SCRATCH, ii);
+		val = net2272_read(dev, SCRATCH);
+		if (val != ii) {
+			dev_dbg(dev->dev,
+				"%s: write/read SCRATCH register test failed: "
+				"wrote:0x%2.2x, read:0x%2.2x\n",
+				__func__, ii, val);
+			return -EINVAL;
+		}
+	}
+	/* To be nice, we write the original SCRATCH value back: */
+	net2272_write(dev, SCRATCH, refval);
+
+	/* Verify NET2272 CHIPREV register is read-only: */
+	refval = net2272_read(dev, CHIPREV_2272);
+	for (ii = 0; ii < 0x100; ii += 7) {
+		net2272_write(dev, CHIPREV_2272, ii);
+		val = net2272_read(dev, CHIPREV_2272);
+		if (val != refval) {
+			dev_dbg(dev->dev,
+				"%s: write/read CHIPREV register test failed: "
+				"wrote 0x%2.2x, read:0x%2.2x expected:0x%2.2x\n",
+				__func__, ii, val, refval);
+			return -EINVAL;
+		}
+	}
+
+	/*
+	 * Verify NET2272's "NET2270 legacy revision" register
+	 *  - NET2272 has two revision registers. The NET2270 legacy revision
+	 *    register should read the same value, regardless of the NET2272
+	 *    silicon revision.  The legacy register applies to NET2270
+	 *    firmware being applied to the NET2272.
+	 */
+	val = net2272_read(dev, CHIPREV_LEGACY);
+	if (val != NET2270_LEGACY_REV) {
+		/*
+		 * Unexpected legacy revision value
+		 * - Perhaps the chip is a NET2270?
+		 */
+		dev_dbg(dev->dev,
+			"%s: WARNING: UNEXPECTED NET2272 LEGACY REGISTER VALUE:\n"
+			" - CHIPREV_LEGACY: expected 0x%2.2x, got:0x%2.2x. (Not NET2272?)\n",
+			__func__, NET2270_LEGACY_REV, val);
+		return -EINVAL;
+	}
+
+	/*
+	 * Verify NET2272 silicon revision
+	 *  - This revision register is appropriate for the silicon version
+	 *    of the NET2272
+	 */
+	val = net2272_read(dev, CHIPREV_2272);
+	switch (val) {
+	case CHIPREV_NET2272_R1:
+		/*
+		 * NET2272 Rev 1 has DMA related errata:
+		 *  - Newer silicon (Rev 1A or better) required
+		 */
+		dev_dbg(dev->dev,
+			"%s: Rev 1 detected: newer silicon recommended for DMA support\n",
+			__func__);
+		break;
+	case CHIPREV_NET2272_R1A:
+		break;
+	default:
+		/* NET2272 silicon version *may* not work with this firmware */
+		dev_dbg(dev->dev,
+			"%s: unexpected silicon revision register value: "
+			" CHIPREV_2272: 0x%2.2x\n",
+			__func__, val);
+		/*
+		 * Return Success, even though the chip rev is not an expected value
+		 *  - Older, pre-built firmware can attempt to operate on newer silicon
+		 *  - Often, new silicon is perfectly compatible
+		 */
+	}
+
+	/* Success: NET2272 checks out OK */
+	return 0;
+}
+
+static void
+net2272_gadget_release(struct device *_dev)
+{
+	struct net2272 *dev = container_of(_dev, struct net2272, gadget.dev);
+
+	kfree(dev);
+}
+
+/*---------------------------------------------------------------------------*/
+
+static void
+net2272_remove(struct net2272 *dev)
+{
+	if (dev->added)
+		usb_del_gadget(&dev->gadget);
+	free_irq(dev->irq, dev);
+	iounmap(dev->base_addr);
+	device_remove_file(dev->dev, &dev_attr_registers);
+
+	dev_info(dev->dev, "unbind\n");
+}
+
+static struct net2272 *net2272_probe_init(struct device *dev, unsigned int irq)
+{
+	struct net2272 *ret;
+
+	if (!irq) {
+		dev_dbg(dev, "No IRQ!\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	/* alloc, and start init */
+	ret = kzalloc(sizeof(*ret), GFP_KERNEL);
+	if (!ret)
+		return ERR_PTR(-ENOMEM);
+
+	spin_lock_init(&ret->lock);
+	ret->irq = irq;
+	ret->dev = dev;
+	ret->gadget.ops = &net2272_ops;
+	ret->gadget.max_speed = USB_SPEED_HIGH;
+
+	/* the "gadget" abstracts/virtualizes the controller */
+	ret->gadget.name = driver_name;
+	usb_initialize_gadget(dev, &ret->gadget, net2272_gadget_release);
+
+	return ret;
+}
+
+static int
+net2272_probe_fin(struct net2272 *dev, unsigned int irqflags)
+{
+	int ret;
+
+	/* See if there... */
+	if (net2272_present(dev)) {
+		dev_warn(dev->dev, "2272 not found!\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	net2272_usb_reset(dev);
+	net2272_usb_reinit(dev);
+
+	ret = request_irq(dev->irq, net2272_irq, irqflags, driver_name, dev);
+	if (ret) {
+		dev_err(dev->dev, "request interrupt %i failed\n", dev->irq);
+		goto err;
+	}
+
+	dev->chiprev = net2272_read(dev, CHIPREV_2272);
+
+	/* done */
+	dev_info(dev->dev, "%s\n", driver_desc);
+	dev_info(dev->dev, "irq %i, mem %p, chip rev %04x, dma %s\n",
+		dev->irq, dev->base_addr, dev->chiprev,
+		dma_mode_string());
+	dev_info(dev->dev, "version: %s\n", driver_vers);
+
+	ret = device_create_file(dev->dev, &dev_attr_registers);
+	if (ret)
+		goto err_irq;
+
+	ret = usb_add_gadget(&dev->gadget);
+	if (ret)
+		goto err_add_udc;
+	dev->added = 1;
+
+	return 0;
+
+err_add_udc:
+	device_remove_file(dev->dev, &dev_attr_registers);
+ err_irq:
+	free_irq(dev->irq, dev);
+ err:
+	return ret;
+}
+
+#ifdef CONFIG_USB_PCI
+
+/*
+ * wrap this driver around the specified device, but
+ * don't respond over USB until a gadget driver binds to us
+ */
+
+static int
+net2272_rdk1_probe(struct pci_dev *pdev, struct net2272 *dev)
+{
+	unsigned long resource, len, tmp;
+	void __iomem *mem_mapped_addr[4];
+	int ret, i;
+
+	/*
+	 * BAR 0 holds PLX 9054 config registers
+	 * BAR 1 is i/o memory; unused here
+	 * BAR 2 holds EPLD config registers
+	 * BAR 3 holds NET2272 registers
+	 */
+
+	/* Find and map all address spaces */
+	for (i = 0; i < 4; ++i) {
+		if (i == 1)
+			continue;	/* BAR1 unused */
+
+		resource = pci_resource_start(pdev, i);
+		len = pci_resource_len(pdev, i);
+
+		if (!request_mem_region(resource, len, driver_name)) {
+			dev_dbg(dev->dev, "controller already in use\n");
+			ret = -EBUSY;
+			goto err;
+		}
+
+		mem_mapped_addr[i] = ioremap(resource, len);
+		if (mem_mapped_addr[i] == NULL) {
+			release_mem_region(resource, len);
+			dev_dbg(dev->dev, "can't map memory\n");
+			ret = -EFAULT;
+			goto err;
+		}
+	}
+
+	dev->rdk1.plx9054_base_addr = mem_mapped_addr[0];
+	dev->rdk1.epld_base_addr = mem_mapped_addr[2];
+	dev->base_addr = mem_mapped_addr[3];
+
+	/* Set PLX 9054 bus width (16 bits) */
+	tmp = readl(dev->rdk1.plx9054_base_addr + LBRD1);
+	writel((tmp & ~(3 << MEMORY_SPACE_LOCAL_BUS_WIDTH)) | W16_BIT,
+			dev->rdk1.plx9054_base_addr + LBRD1);
+
+	/* Enable PLX 9054 Interrupts */
+	writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) |
+			(1 << PCI_INTERRUPT_ENABLE) |
+			(1 << LOCAL_INTERRUPT_INPUT_ENABLE),
+			dev->rdk1.plx9054_base_addr + INTCSR);
+
+	writeb((1 << CHANNEL_CLEAR_INTERRUPT | (0 << CHANNEL_ENABLE)),
+			dev->rdk1.plx9054_base_addr + DMACSR0);
+
+	/* reset */
+	writeb((1 << EPLD_DMA_ENABLE) |
+		(1 << DMA_CTL_DACK) |
+		(1 << DMA_TIMEOUT_ENABLE) |
+		(1 << USER) |
+		(0 << MPX_MODE) |
+		(1 << BUSWIDTH) |
+		(1 << NET2272_RESET),
+		dev->base_addr + EPLD_IO_CONTROL_REGISTER);
+
+	mb();
+	writeb(readb(dev->base_addr + EPLD_IO_CONTROL_REGISTER) &
+		~(1 << NET2272_RESET),
+		dev->base_addr + EPLD_IO_CONTROL_REGISTER);
+	udelay(200);
+
+	return 0;
+
+ err:
+	while (--i >= 0) {
+		if (i == 1)
+			continue;	/* BAR1 unused */
+		iounmap(mem_mapped_addr[i]);
+		release_mem_region(pci_resource_start(pdev, i),
+			pci_resource_len(pdev, i));
+	}
+
+	return ret;
+}
+
+static int
+net2272_rdk2_probe(struct pci_dev *pdev, struct net2272 *dev)
+{
+	unsigned long resource, len;
+	void __iomem *mem_mapped_addr[2];
+	int ret, i;
+
+	/*
+	 * BAR 0 holds FGPA config registers
+	 * BAR 1 holds NET2272 registers
+	 */
+
+	/* Find and map all address spaces, bar2-3 unused in rdk 2 */
+	for (i = 0; i < 2; ++i) {
+		resource = pci_resource_start(pdev, i);
+		len = pci_resource_len(pdev, i);
+
+		if (!request_mem_region(resource, len, driver_name)) {
+			dev_dbg(dev->dev, "controller already in use\n");
+			ret = -EBUSY;
+			goto err;
+		}
+
+		mem_mapped_addr[i] = ioremap(resource, len);
+		if (mem_mapped_addr[i] == NULL) {
+			release_mem_region(resource, len);
+			dev_dbg(dev->dev, "can't map memory\n");
+			ret = -EFAULT;
+			goto err;
+		}
+	}
+
+	dev->rdk2.fpga_base_addr = mem_mapped_addr[0];
+	dev->base_addr = mem_mapped_addr[1];
+
+	mb();
+	/* Set 2272 bus width (16 bits) and reset */
+	writel((1 << CHIP_RESET), dev->rdk2.fpga_base_addr + RDK2_LOCCTLRDK);
+	udelay(200);
+	writel((1 << BUS_WIDTH), dev->rdk2.fpga_base_addr + RDK2_LOCCTLRDK);
+	/* Print fpga version number */
+	dev_info(dev->dev, "RDK2 FPGA version %08x\n",
+		readl(dev->rdk2.fpga_base_addr + RDK2_FPGAREV));
+	/* Enable FPGA Interrupts */
+	writel((1 << NET2272_PCI_IRQ), dev->rdk2.fpga_base_addr + RDK2_IRQENB);
+
+	return 0;
+
+ err:
+	while (--i >= 0) {
+		iounmap(mem_mapped_addr[i]);
+		release_mem_region(pci_resource_start(pdev, i),
+			pci_resource_len(pdev, i));
+	}
+
+	return ret;
+}
+
+static int
+net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct net2272 *dev;
+	int ret;
+
+	dev = net2272_probe_init(&pdev->dev, pdev->irq);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+	dev->dev_id = pdev->device;
+
+	if (pci_enable_device(pdev) < 0) {
+		ret = -ENODEV;
+		goto err_put;
+	}
+
+	pci_set_master(pdev);
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_RDK1: ret = net2272_rdk1_probe(pdev, dev); break;
+	case PCI_DEVICE_ID_RDK2: ret = net2272_rdk2_probe(pdev, dev); break;
+	default: BUG();
+	}
+	if (ret)
+		goto err_pci;
+
+	ret = net2272_probe_fin(dev, 0);
+	if (ret)
+		goto err_pci;
+
+	pci_set_drvdata(pdev, dev);
+
+	return 0;
+
+ err_pci:
+	pci_disable_device(pdev);
+ err_put:
+	usb_put_gadget(&dev->gadget);
+
+	return ret;
+}
+
+static void
+net2272_rdk1_remove(struct pci_dev *pdev, struct net2272 *dev)
+{
+	int i;
+
+	/* disable PLX 9054 interrupts */
+	writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) &
+		~(1 << PCI_INTERRUPT_ENABLE),
+		dev->rdk1.plx9054_base_addr + INTCSR);
+
+	/* clean up resources allocated during probe() */
+	iounmap(dev->rdk1.plx9054_base_addr);
+	iounmap(dev->rdk1.epld_base_addr);
+
+	for (i = 0; i < 4; ++i) {
+		if (i == 1)
+			continue;	/* BAR1 unused */
+		release_mem_region(pci_resource_start(pdev, i),
+			pci_resource_len(pdev, i));
+	}
+}
+
+static void
+net2272_rdk2_remove(struct pci_dev *pdev, struct net2272 *dev)
+{
+	int i;
+
+	/* disable fpga interrupts
+	writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) &
+			~(1 << PCI_INTERRUPT_ENABLE),
+			dev->rdk1.plx9054_base_addr + INTCSR);
+	*/
+
+	/* clean up resources allocated during probe() */
+	iounmap(dev->rdk2.fpga_base_addr);
+
+	for (i = 0; i < 2; ++i)
+		release_mem_region(pci_resource_start(pdev, i),
+			pci_resource_len(pdev, i));
+}
+
+static void
+net2272_pci_remove(struct pci_dev *pdev)
+{
+	struct net2272 *dev = pci_get_drvdata(pdev);
+
+	net2272_remove(dev);
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_RDK1: net2272_rdk1_remove(pdev, dev); break;
+	case PCI_DEVICE_ID_RDK2: net2272_rdk2_remove(pdev, dev); break;
+	default: BUG();
+	}
+
+	pci_disable_device(pdev);
+
+	usb_put_gadget(&dev->gadget);
+}
+
+/* Table of matching PCI IDs */
+static struct pci_device_id pci_ids[] = {
+	{	/* RDK 1 card */
+		.class       = ((PCI_CLASS_BRIDGE_OTHER << 8) | 0xfe),
+		.class_mask  = 0,
+		.vendor      = PCI_VENDOR_ID_PLX,
+		.device      = PCI_DEVICE_ID_RDK1,
+		.subvendor   = PCI_ANY_ID,
+		.subdevice   = PCI_ANY_ID,
+	},
+	{	/* RDK 2 card */
+		.class       = ((PCI_CLASS_BRIDGE_OTHER << 8) | 0xfe),
+		.class_mask  = 0,
+		.vendor      = PCI_VENDOR_ID_PLX,
+		.device      = PCI_DEVICE_ID_RDK2,
+		.subvendor   = PCI_ANY_ID,
+		.subdevice   = PCI_ANY_ID,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static struct pci_driver net2272_pci_driver = {
+	.name     = driver_name,
+	.id_table = pci_ids,
+
+	.probe    = net2272_pci_probe,
+	.remove   = net2272_pci_remove,
+};
+
+static int net2272_pci_register(void)
+{
+	return pci_register_driver(&net2272_pci_driver);
+}
+
+static void net2272_pci_unregister(void)
+{
+	pci_unregister_driver(&net2272_pci_driver);
+}
+
+#else
+static inline int net2272_pci_register(void) { return 0; }
+static inline void net2272_pci_unregister(void) { }
+#endif
+
+/*---------------------------------------------------------------------------*/
+
+static int
+net2272_plat_probe(struct platform_device *pdev)
+{
+	struct net2272 *dev;
+	int ret;
+	unsigned int irqflags;
+	resource_size_t base, len;
+	struct resource *iomem, *iomem_bus, *irq_res;
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iomem_bus = platform_get_resource(pdev, IORESOURCE_BUS, 0);
+	if (!irq_res || !iomem) {
+		dev_err(&pdev->dev, "must provide irq/base addr");
+		return -EINVAL;
+	}
+
+	dev = net2272_probe_init(&pdev->dev, irq_res->start);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+
+	irqflags = 0;
+	if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE)
+		irqflags |= IRQF_TRIGGER_RISING;
+	if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE)
+		irqflags |= IRQF_TRIGGER_FALLING;
+	if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL)
+		irqflags |= IRQF_TRIGGER_HIGH;
+	if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL)
+		irqflags |= IRQF_TRIGGER_LOW;
+
+	base = iomem->start;
+	len = resource_size(iomem);
+	if (iomem_bus)
+		dev->base_shift = iomem_bus->start;
+
+	if (!request_mem_region(base, len, driver_name)) {
+		dev_dbg(dev->dev, "get request memory region!\n");
+		ret = -EBUSY;
+		goto err;
+	}
+	dev->base_addr = ioremap(base, len);
+	if (!dev->base_addr) {
+		dev_dbg(dev->dev, "can't map memory\n");
+		ret = -EFAULT;
+		goto err_req;
+	}
+
+	ret = net2272_probe_fin(dev, IRQF_TRIGGER_LOW);
+	if (ret)
+		goto err_io;
+
+	platform_set_drvdata(pdev, dev);
+	dev_info(&pdev->dev, "running in 16-bit, %sbyte swap local bus mode\n",
+		(net2272_read(dev, LOCCTL) & (1 << BYTE_SWAP)) ? "" : "no ");
+
+	return 0;
+
+ err_io:
+	iounmap(dev->base_addr);
+ err_req:
+	release_mem_region(base, len);
+ err:
+	usb_put_gadget(&dev->gadget);
+
+	return ret;
+}
+
+static int
+net2272_plat_remove(struct platform_device *pdev)
+{
+	struct net2272 *dev = platform_get_drvdata(pdev);
+
+	net2272_remove(dev);
+
+	release_mem_region(pdev->resource[0].start,
+		resource_size(&pdev->resource[0]));
+
+	usb_put_gadget(&dev->gadget);
+
+	return 0;
+}
+
+static struct platform_driver net2272_plat_driver = {
+	.probe   = net2272_plat_probe,
+	.remove  = net2272_plat_remove,
+	.driver  = {
+		.name  = driver_name,
+	},
+	/* FIXME .suspend, .resume */
+};
+MODULE_ALIAS("platform:net2272");
+
+static int __init net2272_init(void)
+{
+	int ret;
+
+	ret = net2272_pci_register();
+	if (ret)
+		return ret;
+	ret = platform_driver_register(&net2272_plat_driver);
+	if (ret)
+		goto err_pci;
+	return ret;
+
+err_pci:
+	net2272_pci_unregister();
+	return ret;
+}
+module_init(net2272_init);
+
+static void __exit net2272_cleanup(void)
+{
+	net2272_pci_unregister();
+	platform_driver_unregister(&net2272_plat_driver);
+}
+module_exit(net2272_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("PLX Technology, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/udc/net2272.h b/drivers/usb/gadget/udc/net2272.h
new file mode 100644
index 000000000..a9994f737
--- /dev/null
+++ b/drivers/usb/gadget/udc/net2272.h
@@ -0,0 +1,584 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * PLX NET2272 high/full speed USB device controller
+ *
+ * Copyright (C) 2005-2006 PLX Technology, Inc.
+ * Copyright (C) 2006-2011 Analog Devices, Inc.
+ */
+
+#ifndef __NET2272_H__
+#define __NET2272_H__
+
+/* Main Registers */
+#define REGADDRPTR			0x00
+#define REGDATA				0x01
+#define IRQSTAT0			0x02
+#define 	ENDPOINT_0_INTERRUPT			0
+#define 	ENDPOINT_A_INTERRUPT			1
+#define 	ENDPOINT_B_INTERRUPT			2
+#define 	ENDPOINT_C_INTERRUPT			3
+#define 	VIRTUALIZED_ENDPOINT_INTERRUPT		4
+#define 	SETUP_PACKET_INTERRUPT			5
+#define 	DMA_DONE_INTERRUPT			6
+#define 	SOF_INTERRUPT				7
+#define IRQSTAT1			0x03
+#define 	CONTROL_STATUS_INTERRUPT		1
+#define 	VBUS_INTERRUPT				2
+#define 	SUSPEND_REQUEST_INTERRUPT		3
+#define 	SUSPEND_REQUEST_CHANGE_INTERRUPT	4
+#define 	RESUME_INTERRUPT			5
+#define 	ROOT_PORT_RESET_INTERRUPT		6
+#define 	RESET_STATUS				7
+#define PAGESEL				0x04
+#define DMAREQ				0x1c
+#define 	DMA_ENDPOINT_SELECT			0
+#define 	DREQ_POLARITY				1
+#define 	DACK_POLARITY				2
+#define 	EOT_POLARITY				3
+#define 	DMA_CONTROL_DACK			4
+#define 	DMA_REQUEST_ENABLE			5
+#define 	DMA_REQUEST				6
+#define 	DMA_BUFFER_VALID			7
+#define SCRATCH				0x1d
+#define IRQENB0				0x20
+#define 	ENDPOINT_0_INTERRUPT_ENABLE		0
+#define 	ENDPOINT_A_INTERRUPT_ENABLE		1
+#define 	ENDPOINT_B_INTERRUPT_ENABLE		2
+#define 	ENDPOINT_C_INTERRUPT_ENABLE		3
+#define 	VIRTUALIZED_ENDPOINT_INTERRUPT_ENABLE	4
+#define 	SETUP_PACKET_INTERRUPT_ENABLE		5
+#define 	DMA_DONE_INTERRUPT_ENABLE		6
+#define 	SOF_INTERRUPT_ENABLE			7
+#define IRQENB1				0x21
+#define 	VBUS_INTERRUPT_ENABLE			2
+#define 	SUSPEND_REQUEST_INTERRUPT_ENABLE	3
+#define 	SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE	4
+#define 	RESUME_INTERRUPT_ENABLE			5
+#define 	ROOT_PORT_RESET_INTERRUPT_ENABLE	6
+#define LOCCTL				0x22
+#define 	DATA_WIDTH				0
+#define 	LOCAL_CLOCK_OUTPUT			1
+#define 		LOCAL_CLOCK_OUTPUT_OFF			0
+#define 		LOCAL_CLOCK_OUTPUT_3_75MHZ		1
+#define 		LOCAL_CLOCK_OUTPUT_7_5MHZ		2
+#define 		LOCAL_CLOCK_OUTPUT_15MHZ		3
+#define 		LOCAL_CLOCK_OUTPUT_30MHZ		4
+#define 		LOCAL_CLOCK_OUTPUT_60MHZ		5
+#define 	DMA_SPLIT_BUS_MODE			4
+#define 	BYTE_SWAP				5
+#define 	BUFFER_CONFIGURATION			6
+#define 		BUFFER_CONFIGURATION_EPA512_EPB512	0
+#define 		BUFFER_CONFIGURATION_EPA1024_EPB512	1
+#define 		BUFFER_CONFIGURATION_EPA1024_EPB1024	2
+#define 		BUFFER_CONFIGURATION_EPA1024DB		3
+#define CHIPREV_LEGACY			0x23
+#define 		NET2270_LEGACY_REV			0x40
+#define LOCCTL1				0x24
+#define 	DMA_MODE				0
+#define 		SLOW_DREQ				0
+#define 		FAST_DREQ				1
+#define 		BURST_MODE				2
+#define 	DMA_DACK_ENABLE				2
+#define CHIPREV_2272			0x25
+#define 		CHIPREV_NET2272_R1			0x10
+#define 		CHIPREV_NET2272_R1A			0x11
+/* USB Registers */
+#define USBCTL0				0x18
+#define 	IO_WAKEUP_ENABLE			1
+#define 	USB_DETECT_ENABLE			3
+#define 	USB_ROOT_PORT_WAKEUP_ENABLE		5
+#define USBCTL1				0x19
+#define 	VBUS_PIN				0
+#define 		USB_FULL_SPEED				1
+#define 		USB_HIGH_SPEED				2
+#define 	GENERATE_RESUME				3
+#define 	VIRTUAL_ENDPOINT_ENABLE			4
+#define FRAME0				0x1a
+#define FRAME1				0x1b
+#define OURADDR				0x30
+#define 	FORCE_IMMEDIATE				7
+#define USBDIAG				0x31
+#define 	FORCE_TRANSMIT_CRC_ERROR		0
+#define 	PREVENT_TRANSMIT_BIT_STUFF		1
+#define 	FORCE_RECEIVE_ERROR			2
+#define 	FAST_TIMES				4
+#define USBTEST				0x32
+#define 	TEST_MODE_SELECT			0
+#define 		NORMAL_OPERATION			0
+#define XCVRDIAG			0x33
+#define 	FORCE_FULL_SPEED			2
+#define 	FORCE_HIGH_SPEED			3
+#define 	OPMODE					4
+#define 		NORMAL_OPERATION			0
+#define 		NON_DRIVING				1
+#define 		DISABLE_BITSTUFF_AND_NRZI_ENCODE	2
+#define 	LINESTATE				6
+#define 		SE0_STATE				0
+#define 		J_STATE					1
+#define 		K_STATE					2
+#define 		SE1_STATE				3
+#define VIRTOUT0			0x34
+#define VIRTOUT1			0x35
+#define VIRTIN0				0x36
+#define VIRTIN1				0x37
+#define SETUP0				0x40
+#define SETUP1				0x41
+#define SETUP2				0x42
+#define SETUP3				0x43
+#define SETUP4				0x44
+#define SETUP5				0x45
+#define SETUP6				0x46
+#define SETUP7				0x47
+/* Endpoint Registers (Paged via PAGESEL) */
+#define EP_DATA				0x05
+#define EP_STAT0			0x06
+#define 	DATA_IN_TOKEN_INTERRUPT			0
+#define 	DATA_OUT_TOKEN_INTERRUPT		1
+#define 	DATA_PACKET_TRANSMITTED_INTERRUPT	2
+#define 	DATA_PACKET_RECEIVED_INTERRUPT		3
+#define 	SHORT_PACKET_TRANSFERRED_INTERRUPT	4
+#define 	NAK_OUT_PACKETS				5
+#define 	BUFFER_EMPTY				6
+#define 	BUFFER_FULL				7
+#define EP_STAT1			0x07
+#define 	TIMEOUT					0
+#define 	USB_OUT_ACK_SENT			1
+#define 	USB_OUT_NAK_SENT			2
+#define 	USB_IN_ACK_RCVD				3
+#define 	USB_IN_NAK_SENT				4
+#define 	USB_STALL_SENT				5
+#define 	LOCAL_OUT_ZLP				6
+#define 	BUFFER_FLUSH				7
+#define EP_TRANSFER0			0x08
+#define EP_TRANSFER1			0x09
+#define EP_TRANSFER2			0x0a
+#define EP_IRQENB			0x0b
+#define 	DATA_IN_TOKEN_INTERRUPT_ENABLE		0
+#define 	DATA_OUT_TOKEN_INTERRUPT_ENABLE		1
+#define 	DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE	2
+#define 	DATA_PACKET_RECEIVED_INTERRUPT_ENABLE	3
+#define 	SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE	4
+#define EP_AVAIL0			0x0c
+#define EP_AVAIL1			0x0d
+#define EP_RSPCLR			0x0e
+#define EP_RSPSET			0x0f
+#define 	ENDPOINT_HALT				0
+#define 	ENDPOINT_TOGGLE				1
+#define 	NAK_OUT_PACKETS_MODE			2
+#define 	CONTROL_STATUS_PHASE_HANDSHAKE		3
+#define 	INTERRUPT_MODE				4
+#define 	AUTOVALIDATE				5
+#define 	HIDE_STATUS_PHASE			6
+#define 	ALT_NAK_OUT_PACKETS			7
+#define EP_MAXPKT0			0x28
+#define EP_MAXPKT1			0x29
+#define 	ADDITIONAL_TRANSACTION_OPPORTUNITIES	3
+#define 		NONE_ADDITIONAL_TRANSACTION		0
+#define 		ONE_ADDITIONAL_TRANSACTION		1
+#define 		TWO_ADDITIONAL_TRANSACTION		2
+#define EP_CFG				0x2a
+#define 	ENDPOINT_NUMBER				0
+#define 	ENDPOINT_DIRECTION			4
+#define 	ENDPOINT_TYPE				5
+#define 	ENDPOINT_ENABLE				7
+#define EP_HBW				0x2b
+#define 	HIGH_BANDWIDTH_OUT_TRANSACTION_PID	0
+#define 		DATA0_PID				0
+#define 		DATA1_PID				1
+#define 		DATA2_PID				2
+#define 		MDATA_PID				3
+#define EP_BUFF_STATES			0x2c
+#define 	BUFFER_A_STATE				0
+#define 	BUFFER_B_STATE				2
+#define 		BUFF_FREE				0
+#define 		BUFF_VALID				1
+#define 		BUFF_LCL				2
+#define 		BUFF_USB				3
+
+/*---------------------------------------------------------------------------*/
+
+#define PCI_DEVICE_ID_RDK1	0x9054
+
+/* PCI-RDK EPLD Registers */
+#define RDK_EPLD_IO_REGISTER1		0x00000000
+#define 	RDK_EPLD_USB_RESET				0
+#define 	RDK_EPLD_USB_POWERDOWN				1
+#define 	RDK_EPLD_USB_WAKEUP				2
+#define 	RDK_EPLD_USB_EOT				3
+#define 	RDK_EPLD_DPPULL					4
+#define RDK_EPLD_IO_REGISTER2		0x00000004
+#define 	RDK_EPLD_BUSWIDTH				0
+#define 	RDK_EPLD_USER					2
+#define 	RDK_EPLD_RESET_INTERRUPT_ENABLE			3
+#define 	RDK_EPLD_DMA_TIMEOUT_ENABLE			4
+#define RDK_EPLD_STATUS_REGISTER	0x00000008
+#define 	RDK_EPLD_USB_LRESET				0
+#define RDK_EPLD_REVISION_REGISTER	0x0000000c
+
+/* PCI-RDK PLX 9054 Registers */
+#define INTCSR				0x68
+#define 	PCI_INTERRUPT_ENABLE				8
+#define 	LOCAL_INTERRUPT_INPUT_ENABLE			11
+#define 	LOCAL_INPUT_INTERRUPT_ACTIVE			15
+#define 	LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE		18
+#define 	LOCAL_DMA_CHANNEL_1_INTERRUPT_ENABLE		19
+#define 	DMA_CHANNEL_0_INTERRUPT_ACTIVE			21
+#define 	DMA_CHANNEL_1_INTERRUPT_ACTIVE			22
+#define CNTRL				0x6C
+#define 	RELOAD_CONFIGURATION_REGISTERS			29
+#define 	PCI_ADAPTER_SOFTWARE_RESET			30
+#define DMAMODE0			0x80
+#define 	LOCAL_BUS_WIDTH					0
+#define 	INTERNAL_WAIT_STATES				2
+#define 	TA_READY_INPUT_ENABLE				6
+#define 	LOCAL_BURST_ENABLE				8
+#define 	SCATTER_GATHER_MODE				9
+#define 	DONE_INTERRUPT_ENABLE				10
+#define 	LOCAL_ADDRESSING_MODE				11
+#define 	DEMAND_MODE					12
+#define 	DMA_EOT_ENABLE					14
+#define 	FAST_SLOW_TERMINATE_MODE_SELECT			15
+#define 	DMA_CHANNEL_INTERRUPT_SELECT			17
+#define DMAPADR0			0x84
+#define DMALADR0			0x88
+#define DMASIZ0				0x8c
+#define DMADPR0				0x90
+#define 	DESCRIPTOR_LOCATION				0
+#define 	END_OF_CHAIN					1
+#define 	INTERRUPT_AFTER_TERMINAL_COUNT			2
+#define 	DIRECTION_OF_TRANSFER				3
+#define DMACSR0				0xa8
+#define 	CHANNEL_ENABLE					0
+#define 	CHANNEL_START					1
+#define 	CHANNEL_ABORT					2
+#define 	CHANNEL_CLEAR_INTERRUPT				3
+#define 	CHANNEL_DONE					4
+#define DMATHR				0xb0
+#define LBRD1				0xf8
+#define 	MEMORY_SPACE_LOCAL_BUS_WIDTH			0
+#define 	W8_BIT						0
+#define 	W16_BIT						1
+
+/* Special OR'ing of INTCSR bits */
+#define LOCAL_INTERRUPT_TEST \
+	((1 << LOCAL_INPUT_INTERRUPT_ACTIVE) | \
+	 (1 << LOCAL_INTERRUPT_INPUT_ENABLE))
+
+#define DMA_CHANNEL_0_TEST \
+	((1 << DMA_CHANNEL_0_INTERRUPT_ACTIVE) | \
+	 (1 << LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE))
+
+#define DMA_CHANNEL_1_TEST \
+	((1 << DMA_CHANNEL_1_INTERRUPT_ACTIVE) | \
+	 (1 << LOCAL_DMA_CHANNEL_1_INTERRUPT_ENABLE))
+
+/* EPLD Registers */
+#define RDK_EPLD_IO_REGISTER1			0x00000000
+#define 	RDK_EPLD_USB_RESET			0
+#define 	RDK_EPLD_USB_POWERDOWN			1
+#define 	RDK_EPLD_USB_WAKEUP			2
+#define 	RDK_EPLD_USB_EOT			3
+#define 	RDK_EPLD_DPPULL				4
+#define RDK_EPLD_IO_REGISTER2			0x00000004
+#define 	RDK_EPLD_BUSWIDTH			0
+#define 	RDK_EPLD_USER				2
+#define 	RDK_EPLD_RESET_INTERRUPT_ENABLE		3
+#define 	RDK_EPLD_DMA_TIMEOUT_ENABLE		4
+#define RDK_EPLD_STATUS_REGISTER		0x00000008
+#define RDK_EPLD_USB_LRESET				0
+#define RDK_EPLD_REVISION_REGISTER		0x0000000c
+
+#define EPLD_IO_CONTROL_REGISTER		0x400
+#define 	NET2272_RESET				0
+#define 	BUSWIDTH				1
+#define 	MPX_MODE				3
+#define 	USER					4
+#define 	DMA_TIMEOUT_ENABLE			5
+#define 	DMA_CTL_DACK				6
+#define 	EPLD_DMA_ENABLE				7
+#define EPLD_DMA_CONTROL_REGISTER		0x800
+#define 	SPLIT_DMA_MODE				0
+#define 	SPLIT_DMA_DIRECTION			1
+#define 	SPLIT_DMA_ENABLE			2
+#define 	SPLIT_DMA_INTERRUPT_ENABLE		3
+#define 	SPLIT_DMA_INTERRUPT			4
+#define 	EPLD_DMA_MODE				5
+#define 	EPLD_DMA_CONTROLLER_ENABLE		7
+#define SPLIT_DMA_ADDRESS_LOW			0xc00
+#define SPLIT_DMA_ADDRESS_HIGH			0x1000
+#define SPLIT_DMA_BYTE_COUNT_LOW		0x1400
+#define SPLIT_DMA_BYTE_COUNT_HIGH		0x1800
+#define EPLD_REVISION_REGISTER			0x1c00
+#define SPLIT_DMA_RAM				0x4000
+#define DMA_RAM_SIZE				0x1000
+
+/*---------------------------------------------------------------------------*/
+
+#define PCI_DEVICE_ID_RDK2	0x3272
+
+/* PCI-RDK version 2 registers */
+
+/* Main Control Registers */
+
+#define RDK2_IRQENB			0x00
+#define RDK2_IRQSTAT			0x04
+#define 	PB7				23
+#define 	PB6				22
+#define 	PB5				21
+#define 	PB4				20
+#define 	PB3				19
+#define 	PB2				18
+#define 	PB1				17
+#define 	PB0				16
+#define 	GP3				23
+#define 	GP2				23
+#define 	GP1				23
+#define 	GP0				23
+#define 	DMA_RETRY_ABORT			6
+#define 	DMA_PAUSE_DONE			5
+#define 	DMA_ABORT_DONE			4
+#define 	DMA_OUT_FIFO_TRANSFER_DONE	3
+#define 	DMA_LOCAL_DONE			2
+#define 	DMA_PCI_DONE			1
+#define 	NET2272_PCI_IRQ			0
+
+#define RDK2_LOCCTLRDK			0x08
+#define 	CHIP_RESET			3
+#define 	SPLIT_DMA			2
+#define 	MULTIPLEX_MODE			1
+#define 	BUS_WIDTH			0
+
+#define RDK2_GPIOCTL			0x10
+#define 	GP3_OUT_ENABLE					7
+#define 	GP2_OUT_ENABLE					6
+#define 	GP1_OUT_ENABLE					5
+#define 	GP0_OUT_ENABLE					4
+#define 	GP3_DATA					3
+#define 	GP2_DATA					2
+#define 	GP1_DATA					1
+#define 	GP0_DATA					0
+
+#define RDK2_LEDSW			0x14
+#define 	LED3				27
+#define 	LED2				26
+#define 	LED1				25
+#define 	LED0				24
+#define 	PBUTTON				16
+#define 	DIPSW				0
+
+#define RDK2_DIAG			0x18
+#define 	RDK2_FAST_TIMES				2
+#define 	FORCE_PCI_SERR				1
+#define 	FORCE_PCI_INT				0
+#define RDK2_FPGAREV			0x1C
+
+/* Dma Control registers */
+#define RDK2_DMACTL			0x80
+#define 	ADDR_HOLD				24
+#define 	RETRY_COUNT				16	/* 23:16 */
+#define 	FIFO_THRESHOLD				11	/* 15:11 */
+#define 	MEM_WRITE_INVALIDATE			10
+#define 	READ_MULTIPLE				9
+#define 	READ_LINE				8
+#define 	RDK2_DMA_MODE				6	/* 7:6 */
+#define 	CONTROL_DACK				5
+#define 	EOT_ENABLE				4
+#define 	EOT_POLARITY				3
+#define 	DACK_POLARITY				2
+#define 	DREQ_POLARITY				1
+#define 	DMA_ENABLE				0
+
+#define RDK2_DMASTAT			0x84
+#define 	GATHER_COUNT				12	/* 14:12 */
+#define 	FIFO_COUNT				6	/* 11:6 */
+#define 	FIFO_FLUSH				5
+#define 	FIFO_TRANSFER				4
+#define 	PAUSE_DONE				3
+#define 	ABORT_DONE				2
+#define 	DMA_ABORT				1
+#define 	DMA_START				0
+
+#define RDK2_DMAPCICOUNT		0x88
+#define 	DMA_DIRECTION				31
+#define 	DMA_PCI_BYTE_COUNT			0	/* 0:23 */
+
+#define RDK2_DMALOCCOUNT		0x8C	/* 0:23 dma local byte count */
+
+#define RDK2_DMAADDR			0x90	/* 2:31 PCI bus starting address */
+
+/*---------------------------------------------------------------------------*/
+
+#define REG_INDEXED_THRESHOLD	(1 << 5)
+
+/* DRIVER DATA STRUCTURES and UTILITIES */
+struct net2272_ep {
+	struct usb_ep ep;
+	struct net2272 *dev;
+	unsigned long irqs;
+
+	/* analogous to a host-side qh */
+	struct list_head queue;
+	const struct usb_endpoint_descriptor *desc;
+	unsigned num:8,
+	         fifo_size:12,
+	         stopped:1,
+	         wedged:1,
+	         is_in:1,
+	         is_iso:1,
+	         dma:1,
+	         not_empty:1;
+};
+
+struct net2272 {
+	/* each device provides one gadget, several endpoints */
+	struct usb_gadget gadget;
+	struct device *dev;
+	unsigned short dev_id;
+
+	spinlock_t lock;
+	struct net2272_ep ep[4];
+	struct usb_gadget_driver *driver;
+	unsigned protocol_stall:1,
+	         softconnect:1,
+	         wakeup:1,
+		 added:1,
+		 async_callbacks:1,
+	         dma_eot_polarity:1,
+	         dma_dack_polarity:1,
+	         dma_dreq_polarity:1,
+	         dma_busy:1;
+	u16 chiprev;
+	u8 pagesel;
+
+	unsigned int irq;
+	unsigned short fifo_mode;
+
+	unsigned int base_shift;
+	u16 __iomem *base_addr;
+	union {
+#ifdef CONFIG_USB_PCI
+		struct {
+			void __iomem *plx9054_base_addr;
+			void __iomem *epld_base_addr;
+		} rdk1;
+		struct {
+			/* Bar0, Bar1 is base_addr both mem-mapped */
+			void __iomem *fpga_base_addr;
+		} rdk2;
+#endif
+	};
+};
+
+static void __iomem *
+net2272_reg_addr(struct net2272 *dev, unsigned int reg)
+{
+	return dev->base_addr + (reg << dev->base_shift);
+}
+
+static void
+net2272_write(struct net2272 *dev, unsigned int reg, u8 value)
+{
+	if (reg >= REG_INDEXED_THRESHOLD) {
+		/*
+		 * Indexed register; use REGADDRPTR/REGDATA
+		 *  - Save and restore REGADDRPTR. This prevents REGADDRPTR from
+		 *    changes between other code sections, but it is time consuming.
+		 *  - Performance tips: either do not save and restore REGADDRPTR (if it
+		 *    is safe) or do save/restore operations only in critical sections.
+		u8 tmp = readb(dev->base_addr + REGADDRPTR);
+		 */
+		writeb((u8)reg, net2272_reg_addr(dev, REGADDRPTR));
+		writeb(value, net2272_reg_addr(dev, REGDATA));
+		/* writeb(tmp, net2272_reg_addr(dev, REGADDRPTR)); */
+	} else
+		writeb(value, net2272_reg_addr(dev, reg));
+}
+
+static u8
+net2272_read(struct net2272 *dev, unsigned int reg)
+{
+	u8 ret;
+
+	if (reg >= REG_INDEXED_THRESHOLD) {
+		/*
+		 * Indexed register; use REGADDRPTR/REGDATA
+		 *  - Save and restore REGADDRPTR. This prevents REGADDRPTR from
+		 *    changes between other code sections, but it is time consuming.
+		 *  - Performance tips: either do not save and restore REGADDRPTR (if it
+		 *    is safe) or do save/restore operations only in critical sections.
+		u8 tmp = readb(dev->base_addr + REGADDRPTR);
+		 */
+		writeb((u8)reg, net2272_reg_addr(dev, REGADDRPTR));
+		ret = readb(net2272_reg_addr(dev, REGDATA));
+		/* writeb(tmp, net2272_reg_addr(dev, REGADDRPTR)); */
+	} else
+		ret = readb(net2272_reg_addr(dev, reg));
+
+	return ret;
+}
+
+static void
+net2272_ep_write(struct net2272_ep *ep, unsigned int reg, u8 value)
+{
+	struct net2272 *dev = ep->dev;
+
+	if (dev->pagesel != ep->num) {
+		net2272_write(dev, PAGESEL, ep->num);
+		dev->pagesel = ep->num;
+	}
+	net2272_write(dev, reg, value);
+}
+
+static u8
+net2272_ep_read(struct net2272_ep *ep, unsigned int reg)
+{
+	struct net2272 *dev = ep->dev;
+
+	if (dev->pagesel != ep->num) {
+		net2272_write(dev, PAGESEL, ep->num);
+		dev->pagesel = ep->num;
+	}
+	return net2272_read(dev, reg);
+}
+
+static void allow_status(struct net2272_ep *ep)
+{
+	/* ep0 only */
+	net2272_ep_write(ep, EP_RSPCLR,
+		(1 << CONTROL_STATUS_PHASE_HANDSHAKE) |
+		(1 << ALT_NAK_OUT_PACKETS) |
+		(1 << NAK_OUT_PACKETS_MODE));
+	ep->stopped = 1;
+}
+
+static void set_halt(struct net2272_ep *ep)
+{
+	/* ep0 and bulk/intr endpoints */
+	net2272_ep_write(ep, EP_RSPCLR, 1 << CONTROL_STATUS_PHASE_HANDSHAKE);
+	net2272_ep_write(ep, EP_RSPSET, 1 << ENDPOINT_HALT);
+}
+
+static void clear_halt(struct net2272_ep *ep)
+{
+	/* ep0 and bulk/intr endpoints */
+	net2272_ep_write(ep, EP_RSPCLR,
+		(1 << ENDPOINT_HALT) | (1 << ENDPOINT_TOGGLE));
+}
+
+/* count (<= 4) bytes in the next fifo write will be valid */
+static void set_fifo_bytecount(struct net2272_ep *ep, unsigned count)
+{
+	/* net2272_ep_write will truncate to u8 for us */
+	net2272_ep_write(ep, EP_TRANSFER2, count >> 16);
+	net2272_ep_write(ep, EP_TRANSFER1, count >> 8);
+	net2272_ep_write(ep, EP_TRANSFER0, count);
+}
+
+struct net2272_request {
+	struct usb_request req;
+	struct list_head queue;
+	unsigned mapped:1,
+	         valid:1;
+};
+
+#endif
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
new file mode 100644
index 000000000..1b929c519
--- /dev/null
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -0,0 +1,3884 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for the PLX NET2280 USB device controller.
+ * Specs and errata are available from <http://www.plxtech.com>.
+ *
+ * PLX Technology Inc. (formerly NetChip Technology) supported the
+ * development of this driver.
+ *
+ *
+ * CODE STATUS HIGHLIGHTS
+ *
+ * This driver should work well with most "gadget" drivers, including
+ * the Mass Storage, Serial, and Ethernet/RNDIS gadget drivers
+ * as well as Gadget Zero and Gadgetfs.
+ *
+ * DMA is enabled by default.
+ *
+ * MSI is enabled by default.  The legacy IRQ is used if MSI couldn't
+ * be enabled.
+ *
+ * Note that almost all the errata workarounds here are only needed for
+ * rev1 chips.  Rev1a silicon (0110) fixes almost all of them.
+ */
+
+/*
+ * Copyright (C) 2003 David Brownell
+ * Copyright (C) 2003-2005 PLX Technology, Inc.
+ * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS
+ *
+ * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility
+ *	with 2282 chip
+ *
+ * Modified Ricardo Ribalda Qtechnology AS  to provide compatibility
+ *	with usb 338x chip. Based on PLX driver
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/prefetch.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+
+#include <asm/byteorder.h>
+#include <asm/irq.h>
+#include <asm/unaligned.h>
+
+#define	DRIVER_DESC		"PLX NET228x/USB338x USB Peripheral Controller"
+#define	DRIVER_VERSION		"2005 Sept 27/v3.0"
+
+#define	EP_DONTUSE		13	/* nonzero */
+
+#define USE_RDK_LEDS		/* GPIO pins control three LEDs */
+
+
+static const char driver_name[] = "net2280";
+static const char driver_desc[] = DRIVER_DESC;
+
+static const u32 ep_bit[9] = { 0, 17, 2, 19, 4, 1, 18, 3, 20 };
+static const char ep0name[] = "ep0";
+
+#define EP_INFO(_name, _caps) \
+	{ \
+		.name = _name, \
+		.caps = _caps, \
+	}
+
+static const struct {
+	const char *name;
+	const struct usb_ep_caps caps;
+} ep_info_dft[] = { /* Default endpoint configuration */
+	EP_INFO(ep0name,
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)),
+	EP_INFO("ep-a",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)),
+	EP_INFO("ep-b",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)),
+	EP_INFO("ep-c",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)),
+	EP_INFO("ep-d",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)),
+	EP_INFO("ep-e",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)),
+	EP_INFO("ep-f",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)),
+	EP_INFO("ep-g",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)),
+	EP_INFO("ep-h",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)),
+}, ep_info_adv[] = { /* Endpoints for usb3380 advance mode */
+	EP_INFO(ep0name,
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)),
+	EP_INFO("ep1in",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep2out",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep3in",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep4out",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep1out",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep2in",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep3out",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep4in",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_IN)),
+};
+
+#undef EP_INFO
+
+/* mode 0 == ep-{a,b,c,d} 1K fifo each
+ * mode 1 == ep-{a,b} 2K fifo each, ep-{c,d} unavailable
+ * mode 2 == ep-a 2K fifo, ep-{b,c} 1K each, ep-d unavailable
+ */
+static ushort fifo_mode;
+
+/* "modprobe net2280 fifo_mode=1" etc */
+module_param(fifo_mode, ushort, 0644);
+
+/* enable_suspend -- When enabled, the driver will respond to
+ * USB suspend requests by powering down the NET2280.  Otherwise,
+ * USB suspend requests will be ignored.  This is acceptable for
+ * self-powered devices
+ */
+static bool enable_suspend;
+
+/* "modprobe net2280 enable_suspend=1" etc */
+module_param(enable_suspend, bool, 0444);
+
+#define	DIR_STRING(bAddress) (((bAddress) & USB_DIR_IN) ? "in" : "out")
+
+static char *type_string(u8 bmAttributes)
+{
+	switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_BULK:	return "bulk";
+	case USB_ENDPOINT_XFER_ISOC:	return "iso";
+	case USB_ENDPOINT_XFER_INT:	return "intr";
+	}
+	return "control";
+}
+
+#include "net2280.h"
+
+#define valid_bit	cpu_to_le32(BIT(VALID_BIT))
+#define dma_done_ie	cpu_to_le32(BIT(DMA_DONE_INTERRUPT_ENABLE))
+
+static void ep_clear_seqnum(struct net2280_ep *ep);
+static void stop_activity(struct net2280 *dev,
+					struct usb_gadget_driver *driver);
+static void ep0_start(struct net2280 *dev);
+
+/*-------------------------------------------------------------------------*/
+static inline void enable_pciirqenb(struct net2280_ep *ep)
+{
+	u32 tmp = readl(&ep->dev->regs->pciirqenb0);
+
+	if (ep->dev->quirks & PLX_LEGACY)
+		tmp |= BIT(ep->num);
+	else
+		tmp |= BIT(ep_bit[ep->num]);
+	writel(tmp, &ep->dev->regs->pciirqenb0);
+
+	return;
+}
+
+static int
+net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+{
+	struct net2280		*dev;
+	struct net2280_ep	*ep;
+	u32			max;
+	u32 tmp = 0;
+	u32 type;
+	unsigned long		flags;
+	static const u32 ep_key[9] = { 1, 0, 1, 0, 1, 1, 0, 1, 0 };
+	int ret = 0;
+
+	ep = container_of(_ep, struct net2280_ep, ep);
+	if (!_ep || !desc || ep->desc || _ep->name == ep0name ||
+			desc->bDescriptorType != USB_DT_ENDPOINT) {
+		pr_err("%s: failed at line=%d\n", __func__, __LINE__);
+		return -EINVAL;
+	}
+	dev = ep->dev;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		ret = -ESHUTDOWN;
+		goto print_err;
+	}
+
+	/* erratum 0119 workaround ties up an endpoint number */
+	if ((desc->bEndpointAddress & 0x0f) == EP_DONTUSE) {
+		ret = -EDOM;
+		goto print_err;
+	}
+
+	if (dev->quirks & PLX_PCIE) {
+		if ((desc->bEndpointAddress & 0x0f) >= 0x0c) {
+			ret = -EDOM;
+			goto print_err;
+		}
+		ep->is_in = !!usb_endpoint_dir_in(desc);
+		if (dev->enhanced_mode && ep->is_in && ep_key[ep->num]) {
+			ret = -EINVAL;
+			goto print_err;
+		}
+	}
+
+	/* sanity check ep-e/ep-f since their fifos are small */
+	max = usb_endpoint_maxp(desc);
+	if (ep->num > 4 && max > 64 && (dev->quirks & PLX_LEGACY)) {
+		ret = -ERANGE;
+		goto print_err;
+	}
+
+	spin_lock_irqsave(&dev->lock, flags);
+	_ep->maxpacket = max;
+	ep->desc = desc;
+
+	/* ep_reset() has already been called */
+	ep->stopped = 0;
+	ep->wedged = 0;
+	ep->out_overflow = 0;
+
+	/* set speed-dependent max packet; may kick in high bandwidth */
+	set_max_speed(ep, max);
+
+	/* set type, direction, address; reset fifo counters */
+	writel(BIT(FIFO_FLUSH), &ep->regs->ep_stat);
+
+	if ((dev->quirks & PLX_PCIE) && dev->enhanced_mode) {
+		tmp = readl(&ep->cfg->ep_cfg);
+		/* If USB ep number doesn't match hardware ep number */
+		if ((tmp & 0xf) != usb_endpoint_num(desc)) {
+			ret = -EINVAL;
+			spin_unlock_irqrestore(&dev->lock, flags);
+			goto print_err;
+		}
+		if (ep->is_in)
+			tmp &= ~USB3380_EP_CFG_MASK_IN;
+		else
+			tmp &= ~USB3380_EP_CFG_MASK_OUT;
+	}
+	type = (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
+	if (type == USB_ENDPOINT_XFER_INT) {
+		/* erratum 0105 workaround prevents hs NYET */
+		if (dev->chiprev == 0100 &&
+				dev->gadget.speed == USB_SPEED_HIGH &&
+				!(desc->bEndpointAddress & USB_DIR_IN))
+			writel(BIT(CLEAR_NAK_OUT_PACKETS_MODE),
+				&ep->regs->ep_rsp);
+	} else if (type == USB_ENDPOINT_XFER_BULK) {
+		/* catch some particularly blatant driver bugs */
+		if ((dev->gadget.speed == USB_SPEED_SUPER && max != 1024) ||
+		    (dev->gadget.speed == USB_SPEED_HIGH && max != 512) ||
+		    (dev->gadget.speed == USB_SPEED_FULL && max > 64)) {
+			spin_unlock_irqrestore(&dev->lock, flags);
+			ret = -ERANGE;
+			goto print_err;
+		}
+	}
+	ep->is_iso = (type == USB_ENDPOINT_XFER_ISOC);
+	/* Enable this endpoint */
+	if (dev->quirks & PLX_LEGACY) {
+		tmp |= type << ENDPOINT_TYPE;
+		tmp |= desc->bEndpointAddress;
+		/* default full fifo lines */
+		tmp |= (4 << ENDPOINT_BYTE_COUNT);
+		tmp |= BIT(ENDPOINT_ENABLE);
+		ep->is_in = (tmp & USB_DIR_IN) != 0;
+	} else {
+		/* In Legacy mode, only OUT endpoints are used */
+		if (dev->enhanced_mode && ep->is_in) {
+			tmp |= type << IN_ENDPOINT_TYPE;
+			tmp |= BIT(IN_ENDPOINT_ENABLE);
+		} else {
+			tmp |= type << OUT_ENDPOINT_TYPE;
+			tmp |= BIT(OUT_ENDPOINT_ENABLE);
+			tmp |= (ep->is_in << ENDPOINT_DIRECTION);
+		}
+
+		tmp |= (4 << ENDPOINT_BYTE_COUNT);
+		if (!dev->enhanced_mode)
+			tmp |= usb_endpoint_num(desc);
+		tmp |= (ep->ep.maxburst << MAX_BURST_SIZE);
+	}
+
+	/* Make sure all the registers are written before ep_rsp*/
+	wmb();
+
+	/* for OUT transfers, block the rx fifo until a read is posted */
+	if (!ep->is_in)
+		writel(BIT(SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+	else if (!(dev->quirks & PLX_2280)) {
+		/* Added for 2282, Don't use nak packets on an in endpoint,
+		 * this was ignored on 2280
+		 */
+		writel(BIT(CLEAR_NAK_OUT_PACKETS) |
+			BIT(CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp);
+	}
+
+	if (dev->quirks & PLX_PCIE)
+		ep_clear_seqnum(ep);
+	writel(tmp, &ep->cfg->ep_cfg);
+
+	/* enable irqs */
+	if (!ep->dma) {				/* pio, per-packet */
+		enable_pciirqenb(ep);
+
+		tmp = BIT(DATA_PACKET_RECEIVED_INTERRUPT_ENABLE) |
+			BIT(DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE);
+		if (dev->quirks & PLX_2280)
+			tmp |= readl(&ep->regs->ep_irqenb);
+		writel(tmp, &ep->regs->ep_irqenb);
+	} else {				/* dma, per-request */
+		tmp = BIT((8 + ep->num));	/* completion */
+		tmp |= readl(&dev->regs->pciirqenb1);
+		writel(tmp, &dev->regs->pciirqenb1);
+
+		/* for short OUT transfers, dma completions can't
+		 * advance the queue; do it pio-style, by hand.
+		 * NOTE erratum 0112 workaround #2
+		 */
+		if ((desc->bEndpointAddress & USB_DIR_IN) == 0) {
+			tmp = BIT(SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE);
+			writel(tmp, &ep->regs->ep_irqenb);
+
+			enable_pciirqenb(ep);
+		}
+	}
+
+	tmp = desc->bEndpointAddress;
+	ep_dbg(dev, "enabled %s (ep%d%s-%s) %s max %04x\n",
+		_ep->name, tmp & 0x0f, DIR_STRING(tmp),
+		type_string(desc->bmAttributes),
+		ep->dma ? "dma" : "pio", max);
+
+	/* pci writes may still be posted */
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
+
+print_err:
+	dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, ret);
+	return ret;
+}
+
+static int handshake(u32 __iomem *ptr, u32 mask, u32 done, int usec)
+{
+	u32	result;
+	int	ret;
+
+	ret = readl_poll_timeout_atomic(ptr, result,
+					((result & mask) == done ||
+					 result == U32_MAX),
+					1, usec);
+	if (result == U32_MAX)		/* device unplugged */
+		return -ENODEV;
+
+	return ret;
+}
+
+static const struct usb_ep_ops net2280_ep_ops;
+
+static void ep_reset_228x(struct net2280_regs __iomem *regs,
+			  struct net2280_ep *ep)
+{
+	u32		tmp;
+
+	ep->desc = NULL;
+	INIT_LIST_HEAD(&ep->queue);
+
+	usb_ep_set_maxpacket_limit(&ep->ep, ~0);
+	ep->ep.ops = &net2280_ep_ops;
+
+	/* disable the dma, irqs, endpoint... */
+	if (ep->dma) {
+		writel(0, &ep->dma->dmactl);
+		writel(BIT(DMA_SCATTER_GATHER_DONE_INTERRUPT) |
+			BIT(DMA_TRANSACTION_DONE_INTERRUPT) |
+			BIT(DMA_ABORT),
+			&ep->dma->dmastat);
+
+		tmp = readl(&regs->pciirqenb0);
+		tmp &= ~BIT(ep->num);
+		writel(tmp, &regs->pciirqenb0);
+	} else {
+		tmp = readl(&regs->pciirqenb1);
+		tmp &= ~BIT((8 + ep->num));	/* completion */
+		writel(tmp, &regs->pciirqenb1);
+	}
+	writel(0, &ep->regs->ep_irqenb);
+
+	/* init to our chosen defaults, notably so that we NAK OUT
+	 * packets until the driver queues a read (+note erratum 0112)
+	 */
+	if (!ep->is_in || (ep->dev->quirks & PLX_2280)) {
+		tmp = BIT(SET_NAK_OUT_PACKETS_MODE) |
+		BIT(SET_NAK_OUT_PACKETS) |
+		BIT(CLEAR_EP_HIDE_STATUS_PHASE) |
+		BIT(CLEAR_INTERRUPT_MODE);
+	} else {
+		/* added for 2282 */
+		tmp = BIT(CLEAR_NAK_OUT_PACKETS_MODE) |
+		BIT(CLEAR_NAK_OUT_PACKETS) |
+		BIT(CLEAR_EP_HIDE_STATUS_PHASE) |
+		BIT(CLEAR_INTERRUPT_MODE);
+	}
+
+	if (ep->num != 0) {
+		tmp |= BIT(CLEAR_ENDPOINT_TOGGLE) |
+			BIT(CLEAR_ENDPOINT_HALT);
+	}
+	writel(tmp, &ep->regs->ep_rsp);
+
+	/* scrub most status bits, and flush any fifo state */
+	if (ep->dev->quirks & PLX_2280)
+		tmp = BIT(FIFO_OVERFLOW) |
+			BIT(FIFO_UNDERFLOW);
+	else
+		tmp = 0;
+
+	writel(tmp | BIT(TIMEOUT) |
+		BIT(USB_STALL_SENT) |
+		BIT(USB_IN_NAK_SENT) |
+		BIT(USB_IN_ACK_RCVD) |
+		BIT(USB_OUT_PING_NAK_SENT) |
+		BIT(USB_OUT_ACK_SENT) |
+		BIT(FIFO_FLUSH) |
+		BIT(SHORT_PACKET_OUT_DONE_INTERRUPT) |
+		BIT(SHORT_PACKET_TRANSFERRED_INTERRUPT) |
+		BIT(DATA_PACKET_RECEIVED_INTERRUPT) |
+		BIT(DATA_PACKET_TRANSMITTED_INTERRUPT) |
+		BIT(DATA_OUT_PING_TOKEN_INTERRUPT) |
+		BIT(DATA_IN_TOKEN_INTERRUPT),
+		&ep->regs->ep_stat);
+
+	/* fifo size is handled separately */
+}
+
+static void ep_reset_338x(struct net2280_regs __iomem *regs,
+					struct net2280_ep *ep)
+{
+	u32 tmp, dmastat;
+
+	ep->desc = NULL;
+	INIT_LIST_HEAD(&ep->queue);
+
+	usb_ep_set_maxpacket_limit(&ep->ep, ~0);
+	ep->ep.ops = &net2280_ep_ops;
+
+	/* disable the dma, irqs, endpoint... */
+	if (ep->dma) {
+		writel(0, &ep->dma->dmactl);
+		writel(BIT(DMA_ABORT_DONE_INTERRUPT) |
+		       BIT(DMA_PAUSE_DONE_INTERRUPT) |
+		       BIT(DMA_SCATTER_GATHER_DONE_INTERRUPT) |
+		       BIT(DMA_TRANSACTION_DONE_INTERRUPT),
+		       /* | BIT(DMA_ABORT), */
+		       &ep->dma->dmastat);
+
+		dmastat = readl(&ep->dma->dmastat);
+		if (dmastat == 0x5002) {
+			ep_warn(ep->dev, "The dmastat return = %x!!\n",
+			       dmastat);
+			writel(0x5a, &ep->dma->dmastat);
+		}
+
+		tmp = readl(&regs->pciirqenb0);
+		tmp &= ~BIT(ep_bit[ep->num]);
+		writel(tmp, &regs->pciirqenb0);
+	} else {
+		if (ep->num < 5) {
+			tmp = readl(&regs->pciirqenb1);
+			tmp &= ~BIT((8 + ep->num));	/* completion */
+			writel(tmp, &regs->pciirqenb1);
+		}
+	}
+	writel(0, &ep->regs->ep_irqenb);
+
+	writel(BIT(SHORT_PACKET_OUT_DONE_INTERRUPT) |
+	       BIT(SHORT_PACKET_TRANSFERRED_INTERRUPT) |
+	       BIT(FIFO_OVERFLOW) |
+	       BIT(DATA_PACKET_RECEIVED_INTERRUPT) |
+	       BIT(DATA_PACKET_TRANSMITTED_INTERRUPT) |
+	       BIT(DATA_OUT_PING_TOKEN_INTERRUPT) |
+	       BIT(DATA_IN_TOKEN_INTERRUPT), &ep->regs->ep_stat);
+
+	tmp = readl(&ep->cfg->ep_cfg);
+	if (ep->is_in)
+		tmp &= ~USB3380_EP_CFG_MASK_IN;
+	else
+		tmp &= ~USB3380_EP_CFG_MASK_OUT;
+	writel(tmp, &ep->cfg->ep_cfg);
+}
+
+static void nuke(struct net2280_ep *);
+
+static int net2280_disable(struct usb_ep *_ep)
+{
+	struct net2280_ep	*ep;
+	unsigned long		flags;
+
+	ep = container_of(_ep, struct net2280_ep, ep);
+	if (!_ep || _ep->name == ep0name) {
+		pr_err("%s: Invalid ep=%p\n", __func__, _ep);
+		return -EINVAL;
+	}
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	nuke(ep);
+
+	if (ep->dev->quirks & PLX_PCIE)
+		ep_reset_338x(ep->dev->regs, ep);
+	else
+		ep_reset_228x(ep->dev->regs, ep);
+
+	ep_vdbg(ep->dev, "disabled %s %s\n",
+			ep->dma ? "dma" : "pio", _ep->name);
+
+	/* synch memory views with the device */
+	(void)readl(&ep->cfg->ep_cfg);
+
+	if (!ep->dma && ep->num >= 1 && ep->num <= 4)
+		ep->dma = &ep->dev->dma[ep->num - 1];
+
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_request
+*net2280_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct net2280_ep	*ep;
+	struct net2280_request	*req;
+
+	if (!_ep) {
+		pr_err("%s: Invalid ep\n", __func__);
+		return NULL;
+	}
+	ep = container_of(_ep, struct net2280_ep, ep);
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	/* this dma descriptor may be swapped with the previous dummy */
+	if (ep->dma) {
+		struct net2280_dma	*td;
+
+		td = dma_pool_alloc(ep->dev->requests, gfp_flags,
+				&req->td_dma);
+		if (!td) {
+			kfree(req);
+			return NULL;
+		}
+		td->dmacount = 0;	/* not VALID */
+		td->dmadesc = td->dmaaddr;
+		req->td = td;
+	}
+	return &req->req;
+}
+
+static void net2280_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct net2280_ep	*ep;
+	struct net2280_request	*req;
+
+	ep = container_of(_ep, struct net2280_ep, ep);
+	if (!_ep || !_req) {
+		dev_err(&ep->dev->pdev->dev, "%s: Invalid ep=%p or req=%p\n",
+							__func__, _ep, _req);
+		return;
+	}
+
+	req = container_of(_req, struct net2280_request, req);
+	WARN_ON(!list_empty(&req->queue));
+	if (req->td)
+		dma_pool_free(ep->dev->requests, req->td, req->td_dma);
+	kfree(req);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* load a packet into the fifo we use for usb IN transfers.
+ * works for all endpoints.
+ *
+ * NOTE: pio with ep-a..ep-d could stuff multiple packets into the fifo
+ * at a time, but this code is simpler because it knows it only writes
+ * one packet.  ep-a..ep-d should use dma instead.
+ */
+static void write_fifo(struct net2280_ep *ep, struct usb_request *req)
+{
+	struct net2280_ep_regs	__iomem *regs = ep->regs;
+	u8			*buf;
+	u32			tmp;
+	unsigned		count, total;
+
+	/* INVARIANT:  fifo is currently empty. (testable) */
+
+	if (req) {
+		buf = req->buf + req->actual;
+		prefetch(buf);
+		total = req->length - req->actual;
+	} else {
+		total = 0;
+		buf = NULL;
+	}
+
+	/* write just one packet at a time */
+	count = ep->ep.maxpacket;
+	if (count > total)	/* min() cannot be used on a bitfield */
+		count = total;
+
+	ep_vdbg(ep->dev, "write %s fifo (IN) %d bytes%s req %p\n",
+			ep->ep.name, count,
+			(count != ep->ep.maxpacket) ? " (short)" : "",
+			req);
+	while (count >= 4) {
+		/* NOTE be careful if you try to align these. fifo lines
+		 * should normally be full (4 bytes) and successive partial
+		 * lines are ok only in certain cases.
+		 */
+		tmp = get_unaligned((u32 *)buf);
+		cpu_to_le32s(&tmp);
+		writel(tmp, &regs->ep_data);
+		buf += 4;
+		count -= 4;
+	}
+
+	/* last fifo entry is "short" unless we wrote a full packet.
+	 * also explicitly validate last word in (periodic) transfers
+	 * when maxpacket is not a multiple of 4 bytes.
+	 */
+	if (count || total < ep->ep.maxpacket) {
+		tmp = count ? get_unaligned((u32 *)buf) : count;
+		cpu_to_le32s(&tmp);
+		set_fifo_bytecount(ep, count & 0x03);
+		writel(tmp, &regs->ep_data);
+	}
+
+	/* pci writes may still be posted */
+}
+
+/* work around erratum 0106: PCI and USB race over the OUT fifo.
+ * caller guarantees chiprev 0100, out endpoint is NAKing, and
+ * there's no real data in the fifo.
+ *
+ * NOTE:  also used in cases where that erratum doesn't apply:
+ * where the host wrote "too much" data to us.
+ */
+static void out_flush(struct net2280_ep *ep)
+{
+	u32	__iomem *statp;
+	u32	tmp;
+
+	statp = &ep->regs->ep_stat;
+
+	tmp = readl(statp);
+	if (tmp & BIT(NAK_OUT_PACKETS)) {
+		ep_dbg(ep->dev, "%s %s %08x !NAK\n",
+			ep->ep.name, __func__, tmp);
+		writel(BIT(SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+	}
+
+	writel(BIT(DATA_OUT_PING_TOKEN_INTERRUPT) |
+		BIT(DATA_PACKET_RECEIVED_INTERRUPT),
+		statp);
+	writel(BIT(FIFO_FLUSH), statp);
+	/* Make sure that stap is written */
+	mb();
+	tmp = readl(statp);
+	if (tmp & BIT(DATA_OUT_PING_TOKEN_INTERRUPT) &&
+			/* high speed did bulk NYET; fifo isn't filling */
+			ep->dev->gadget.speed == USB_SPEED_FULL) {
+		unsigned	usec;
+
+		usec = 50;		/* 64 byte bulk/interrupt */
+		handshake(statp, BIT(USB_OUT_PING_NAK_SENT),
+				BIT(USB_OUT_PING_NAK_SENT), usec);
+		/* NAK done; now CLEAR_NAK_OUT_PACKETS is safe */
+	}
+}
+
+/* unload packet(s) from the fifo we use for usb OUT transfers.
+ * returns true iff the request completed, because of short packet
+ * or the request buffer having filled with full packets.
+ *
+ * for ep-a..ep-d this will read multiple packets out when they
+ * have been accepted.
+ */
+static int read_fifo(struct net2280_ep *ep, struct net2280_request *req)
+{
+	struct net2280_ep_regs	__iomem *regs = ep->regs;
+	u8			*buf = req->req.buf + req->req.actual;
+	unsigned		count, tmp, is_short;
+	unsigned		cleanup = 0, prevent = 0;
+
+	/* erratum 0106 ... packets coming in during fifo reads might
+	 * be incompletely rejected.  not all cases have workarounds.
+	 */
+	if (ep->dev->chiprev == 0x0100 &&
+			ep->dev->gadget.speed == USB_SPEED_FULL) {
+		udelay(1);
+		tmp = readl(&ep->regs->ep_stat);
+		if ((tmp & BIT(NAK_OUT_PACKETS)))
+			cleanup = 1;
+		else if ((tmp & BIT(FIFO_FULL))) {
+			start_out_naking(ep);
+			prevent = 1;
+		}
+		/* else: hope we don't see the problem */
+	}
+
+	/* never overflow the rx buffer. the fifo reads packets until
+	 * it sees a short one; we might not be ready for them all.
+	 */
+	prefetchw(buf);
+	count = readl(&regs->ep_avail);
+	if (unlikely(count == 0)) {
+		udelay(1);
+		tmp = readl(&ep->regs->ep_stat);
+		count = readl(&regs->ep_avail);
+		/* handled that data already? */
+		if (count == 0 && (tmp & BIT(NAK_OUT_PACKETS)) == 0)
+			return 0;
+	}
+
+	tmp = req->req.length - req->req.actual;
+	if (count > tmp) {
+		/* as with DMA, data overflow gets flushed */
+		if ((tmp % ep->ep.maxpacket) != 0) {
+			ep_err(ep->dev,
+				"%s out fifo %d bytes, expected %d\n",
+				ep->ep.name, count, tmp);
+			req->req.status = -EOVERFLOW;
+			cleanup = 1;
+			/* NAK_OUT_PACKETS will be set, so flushing is safe;
+			 * the next read will start with the next packet
+			 */
+		} /* else it's a ZLP, no worries */
+		count = tmp;
+	}
+	req->req.actual += count;
+
+	is_short = (count == 0) || ((count % ep->ep.maxpacket) != 0);
+
+	ep_vdbg(ep->dev, "read %s fifo (OUT) %d bytes%s%s%s req %p %d/%d\n",
+			ep->ep.name, count, is_short ? " (short)" : "",
+			cleanup ? " flush" : "", prevent ? " nak" : "",
+			req, req->req.actual, req->req.length);
+
+	while (count >= 4) {
+		tmp = readl(&regs->ep_data);
+		cpu_to_le32s(&tmp);
+		put_unaligned(tmp, (u32 *)buf);
+		buf += 4;
+		count -= 4;
+	}
+	if (count) {
+		tmp = readl(&regs->ep_data);
+		/* LE conversion is implicit here: */
+		do {
+			*buf++ = (u8) tmp;
+			tmp >>= 8;
+		} while (--count);
+	}
+	if (cleanup)
+		out_flush(ep);
+	if (prevent) {
+		writel(BIT(CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+		(void) readl(&ep->regs->ep_rsp);
+	}
+
+	return is_short || req->req.actual == req->req.length;
+}
+
+/* fill out dma descriptor to match a given request */
+static void fill_dma_desc(struct net2280_ep *ep,
+					struct net2280_request *req, int valid)
+{
+	struct net2280_dma	*td = req->td;
+	u32			dmacount = req->req.length;
+
+	/* don't let DMA continue after a short OUT packet,
+	 * so overruns can't affect the next transfer.
+	 * in case of overruns on max-size packets, we can't
+	 * stop the fifo from filling but we can flush it.
+	 */
+	if (ep->is_in)
+		dmacount |= BIT(DMA_DIRECTION);
+	if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) ||
+					!(ep->dev->quirks & PLX_2280))
+		dmacount |= BIT(END_OF_CHAIN);
+
+	req->valid = valid;
+	if (valid)
+		dmacount |= BIT(VALID_BIT);
+	dmacount |= BIT(DMA_DONE_INTERRUPT_ENABLE);
+
+	/* td->dmadesc = previously set by caller */
+	td->dmaaddr = cpu_to_le32 (req->req.dma);
+
+	/* 2280 may be polling VALID_BIT through ep->dma->dmadesc */
+	wmb();
+	td->dmacount = cpu_to_le32(dmacount);
+}
+
+static const u32 dmactl_default =
+		BIT(DMA_SCATTER_GATHER_DONE_INTERRUPT) |
+		BIT(DMA_CLEAR_COUNT_ENABLE) |
+		/* erratum 0116 workaround part 1 (use POLLING) */
+		(POLL_100_USEC << DESCRIPTOR_POLLING_RATE) |
+		BIT(DMA_VALID_BIT_POLLING_ENABLE) |
+		BIT(DMA_VALID_BIT_ENABLE) |
+		BIT(DMA_SCATTER_GATHER_ENABLE) |
+		/* erratum 0116 workaround part 2 (no AUTOSTART) */
+		BIT(DMA_ENABLE);
+
+static inline void spin_stop_dma(struct net2280_dma_regs __iomem *dma)
+{
+	handshake(&dma->dmactl, BIT(DMA_ENABLE), 0, 50);
+}
+
+static inline void stop_dma(struct net2280_dma_regs __iomem *dma)
+{
+	writel(readl(&dma->dmactl) & ~BIT(DMA_ENABLE), &dma->dmactl);
+	spin_stop_dma(dma);
+}
+
+static void start_queue(struct net2280_ep *ep, u32 dmactl, u32 td_dma)
+{
+	struct net2280_dma_regs	__iomem *dma = ep->dma;
+	unsigned int tmp = BIT(VALID_BIT) | (ep->is_in << DMA_DIRECTION);
+
+	if (!(ep->dev->quirks & PLX_2280))
+		tmp |= BIT(END_OF_CHAIN);
+
+	writel(tmp, &dma->dmacount);
+	writel(readl(&dma->dmastat), &dma->dmastat);
+
+	writel(td_dma, &dma->dmadesc);
+	if (ep->dev->quirks & PLX_PCIE)
+		dmactl |= BIT(DMA_REQUEST_OUTSTANDING);
+	writel(dmactl, &dma->dmactl);
+
+	/* erratum 0116 workaround part 3:  pci arbiter away from net2280 */
+	(void) readl(&ep->dev->pci->pcimstctl);
+
+	writel(BIT(DMA_START), &dma->dmastat);
+}
+
+static void start_dma(struct net2280_ep *ep, struct net2280_request *req)
+{
+	u32			tmp;
+	struct net2280_dma_regs	__iomem *dma = ep->dma;
+
+	/* FIXME can't use DMA for ZLPs */
+
+	/* on this path we "know" there's no dma active (yet) */
+	WARN_ON(readl(&dma->dmactl) & BIT(DMA_ENABLE));
+	writel(0, &ep->dma->dmactl);
+
+	/* previous OUT packet might have been short */
+	if (!ep->is_in && (readl(&ep->regs->ep_stat) &
+				BIT(NAK_OUT_PACKETS))) {
+		writel(BIT(SHORT_PACKET_TRANSFERRED_INTERRUPT),
+			&ep->regs->ep_stat);
+
+		tmp = readl(&ep->regs->ep_avail);
+		if (tmp) {
+			writel(readl(&dma->dmastat), &dma->dmastat);
+
+			/* transfer all/some fifo data */
+			writel(req->req.dma, &dma->dmaaddr);
+			tmp = min(tmp, req->req.length);
+
+			/* dma irq, faking scatterlist status */
+			req->td->dmacount = cpu_to_le32(req->req.length - tmp);
+			writel(BIT(DMA_DONE_INTERRUPT_ENABLE) | tmp,
+					&dma->dmacount);
+			req->td->dmadesc = 0;
+			req->valid = 1;
+
+			writel(BIT(DMA_ENABLE), &dma->dmactl);
+			writel(BIT(DMA_START), &dma->dmastat);
+			return;
+		}
+		stop_out_naking(ep);
+	}
+
+	tmp = dmactl_default;
+
+	/* force packet boundaries between dma requests, but prevent the
+	 * controller from automagically writing a last "short" packet
+	 * (zero length) unless the driver explicitly said to do that.
+	 */
+	if (ep->is_in) {
+		if (likely((req->req.length % ep->ep.maxpacket) ||
+							req->req.zero)){
+			tmp |= BIT(DMA_FIFO_VALIDATE);
+			ep->in_fifo_validate = 1;
+		} else
+			ep->in_fifo_validate = 0;
+	}
+
+	/* init req->td, pointing to the current dummy */
+	req->td->dmadesc = cpu_to_le32 (ep->td_dma);
+	fill_dma_desc(ep, req, 1);
+
+	req->td->dmacount |= cpu_to_le32(BIT(END_OF_CHAIN));
+
+	start_queue(ep, tmp, req->td_dma);
+}
+
+static inline void
+queue_dma(struct net2280_ep *ep, struct net2280_request *req, int valid)
+{
+	/* swap new dummy for old, link; fill and maybe activate */
+	swap(ep->dummy, req->td);
+	swap(ep->td_dma, req->td_dma);
+
+	req->td->dmadesc = cpu_to_le32 (ep->td_dma);
+
+	fill_dma_desc(ep, req, valid);
+}
+
+static void
+done(struct net2280_ep *ep, struct net2280_request *req, int status)
+{
+	struct net2280		*dev;
+	unsigned		stopped = ep->stopped;
+
+	list_del_init(&req->queue);
+
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	dev = ep->dev;
+	if (ep->dma)
+		usb_gadget_unmap_request(&dev->gadget, &req->req, ep->is_in);
+
+	if (status && status != -ESHUTDOWN)
+		ep_vdbg(dev, "complete %s req %p stat %d len %u/%u\n",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length);
+
+	/* don't modify queue heads during completion callback */
+	ep->stopped = 1;
+	spin_unlock(&dev->lock);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&dev->lock);
+	ep->stopped = stopped;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+net2280_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct net2280_request	*req;
+	struct net2280_ep	*ep;
+	struct net2280		*dev;
+	unsigned long		flags;
+	int ret = 0;
+
+	/* we always require a cpu-view buffer, so that we can
+	 * always use pio (as fallback or whatever).
+	 */
+	ep = container_of(_ep, struct net2280_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0)) {
+		pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);
+		return -EINVAL;
+	}
+	req = container_of(_req, struct net2280_request, req);
+	if (!_req || !_req->complete || !_req->buf ||
+				!list_empty(&req->queue)) {
+		ret = -EINVAL;
+		goto print_err;
+	}
+	if (_req->length > (~0 & DMA_BYTE_COUNT_MASK)) {
+		ret = -EDOM;
+		goto print_err;
+	}
+	dev = ep->dev;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		ret = -ESHUTDOWN;
+		goto print_err;
+	}
+
+	/* FIXME implement PIO fallback for ZLPs with DMA */
+	if (ep->dma && _req->length == 0) {
+		ret = -EOPNOTSUPP;
+		goto print_err;
+	}
+
+	/* set up dma mapping in case the caller didn't */
+	if (ep->dma) {
+		ret = usb_gadget_map_request(&dev->gadget, _req,
+				ep->is_in);
+		if (ret)
+			goto print_err;
+	}
+
+	ep_vdbg(dev, "%s queue req %p, len %d buf %p\n",
+			_ep->name, _req, _req->length, _req->buf);
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	/* kickstart this i/o queue? */
+	if  (list_empty(&ep->queue) && !ep->stopped &&
+		!((dev->quirks & PLX_PCIE) && ep->dma &&
+		  (readl(&ep->regs->ep_rsp) & BIT(CLEAR_ENDPOINT_HALT)))) {
+
+		/* use DMA if the endpoint supports it, else pio */
+		if (ep->dma)
+			start_dma(ep, req);
+		else {
+			/* maybe there's no control data, just status ack */
+			if (ep->num == 0 && _req->length == 0) {
+				allow_status(ep);
+				done(ep, req, 0);
+				ep_vdbg(dev, "%s status ack\n", ep->ep.name);
+				goto done;
+			}
+
+			/* PIO ... stuff the fifo, or unblock it.  */
+			if (ep->is_in)
+				write_fifo(ep, _req);
+			else {
+				u32	s;
+
+				/* OUT FIFO might have packet(s) buffered */
+				s = readl(&ep->regs->ep_stat);
+				if ((s & BIT(FIFO_EMPTY)) == 0) {
+					/* note:  _req->short_not_ok is
+					 * ignored here since PIO _always_
+					 * stops queue advance here, and
+					 * _req->status doesn't change for
+					 * short reads (only _req->actual)
+					 */
+					if (read_fifo(ep, req) &&
+							ep->num == 0) {
+						done(ep, req, 0);
+						allow_status(ep);
+						/* don't queue it */
+						req = NULL;
+					} else if (read_fifo(ep, req) &&
+							ep->num != 0) {
+						done(ep, req, 0);
+						req = NULL;
+					} else
+						s = readl(&ep->regs->ep_stat);
+				}
+
+				/* don't NAK, let the fifo fill */
+				if (req && (s & BIT(NAK_OUT_PACKETS)))
+					writel(BIT(CLEAR_NAK_OUT_PACKETS),
+							&ep->regs->ep_rsp);
+			}
+		}
+
+	} else if (ep->dma) {
+		int	valid = 1;
+
+		if (ep->is_in) {
+			int	expect;
+
+			/* preventing magic zlps is per-engine state, not
+			 * per-transfer; irq logic must recover hiccups.
+			 */
+			expect = likely(req->req.zero ||
+				(req->req.length % ep->ep.maxpacket));
+			if (expect != ep->in_fifo_validate)
+				valid = 0;
+		}
+		queue_dma(ep, req, valid);
+
+	} /* else the irq handler advances the queue. */
+
+	ep->responded = 1;
+	if (req)
+		list_add_tail(&req->queue, &ep->queue);
+done:
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	/* pci writes may still be posted */
+	return ret;
+
+print_err:
+	dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, ret);
+	return ret;
+}
+
+static inline void
+dma_done(struct net2280_ep *ep,	struct net2280_request *req, u32 dmacount,
+		int status)
+{
+	req->req.actual = req->req.length - (DMA_BYTE_COUNT_MASK & dmacount);
+	done(ep, req, status);
+}
+
+static int scan_dma_completions(struct net2280_ep *ep)
+{
+	int num_completed = 0;
+
+	/* only look at descriptors that were "naturally" retired,
+	 * so fifo and list head state won't matter
+	 */
+	while (!list_empty(&ep->queue)) {
+		struct net2280_request	*req;
+		u32 req_dma_count;
+
+		req = list_entry(ep->queue.next,
+				struct net2280_request, queue);
+		if (!req->valid)
+			break;
+		rmb();
+		req_dma_count = le32_to_cpup(&req->td->dmacount);
+		if ((req_dma_count & BIT(VALID_BIT)) != 0)
+			break;
+
+		/* SHORT_PACKET_TRANSFERRED_INTERRUPT handles "usb-short"
+		 * cases where DMA must be aborted; this code handles
+		 * all non-abort DMA completions.
+		 */
+		if (unlikely(req->td->dmadesc == 0)) {
+			/* paranoia */
+			u32 const ep_dmacount = readl(&ep->dma->dmacount);
+
+			if (ep_dmacount & DMA_BYTE_COUNT_MASK)
+				break;
+			/* single transfer mode */
+			dma_done(ep, req, req_dma_count, 0);
+			num_completed++;
+			break;
+		} else if (!ep->is_in &&
+			   (req->req.length % ep->ep.maxpacket) &&
+			   !(ep->dev->quirks & PLX_PCIE)) {
+
+			u32 const ep_stat = readl(&ep->regs->ep_stat);
+			/* AVOID TROUBLE HERE by not issuing short reads from
+			 * your gadget driver.  That helps avoids errata 0121,
+			 * 0122, and 0124; not all cases trigger the warning.
+			 */
+			if ((ep_stat & BIT(NAK_OUT_PACKETS)) == 0) {
+				ep_warn(ep->dev, "%s lost packet sync!\n",
+						ep->ep.name);
+				req->req.status = -EOVERFLOW;
+			} else {
+				u32 const ep_avail = readl(&ep->regs->ep_avail);
+				if (ep_avail) {
+					/* fifo gets flushed later */
+					ep->out_overflow = 1;
+					ep_dbg(ep->dev,
+						"%s dma, discard %d len %d\n",
+						ep->ep.name, ep_avail,
+						req->req.length);
+					req->req.status = -EOVERFLOW;
+				}
+			}
+		}
+		dma_done(ep, req, req_dma_count, 0);
+		num_completed++;
+	}
+
+	return num_completed;
+}
+
+static void restart_dma(struct net2280_ep *ep)
+{
+	struct net2280_request	*req;
+
+	if (ep->stopped)
+		return;
+	req = list_entry(ep->queue.next, struct net2280_request, queue);
+
+	start_dma(ep, req);
+}
+
+static void abort_dma(struct net2280_ep *ep)
+{
+	/* abort the current transfer */
+	if (likely(!list_empty(&ep->queue))) {
+		/* FIXME work around errata 0121, 0122, 0124 */
+		writel(BIT(DMA_ABORT), &ep->dma->dmastat);
+		spin_stop_dma(ep->dma);
+	} else
+		stop_dma(ep->dma);
+	scan_dma_completions(ep);
+}
+
+/* dequeue ALL requests */
+static void nuke(struct net2280_ep *ep)
+{
+	struct net2280_request	*req;
+
+	/* called with spinlock held */
+	ep->stopped = 1;
+	if (ep->dma)
+		abort_dma(ep);
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next,
+				struct net2280_request,
+				queue);
+		done(ep, req, -ESHUTDOWN);
+	}
+}
+
+/* dequeue JUST ONE request */
+static int net2280_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct net2280_ep	*ep;
+	struct net2280_request	*req = NULL;
+	struct net2280_request	*iter;
+	unsigned long		flags;
+	u32			dmactl;
+	int			stopped;
+
+	ep = container_of(_ep, struct net2280_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0) || !_req) {
+		pr_err("%s: Invalid ep=%p or ep->desc or req=%p\n",
+						__func__, _ep, _req);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	stopped = ep->stopped;
+
+	/* quiesce dma while we patch the queue */
+	dmactl = 0;
+	ep->stopped = 1;
+	if (ep->dma) {
+		dmactl = readl(&ep->dma->dmactl);
+		/* WARNING erratum 0127 may kick in ... */
+		stop_dma(ep->dma);
+		scan_dma_completions(ep);
+	}
+
+	/* make sure it's still queued on this endpoint */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		req = iter;
+		break;
+	}
+	if (!req) {
+		ep->stopped = stopped;
+		spin_unlock_irqrestore(&ep->dev->lock, flags);
+		ep_dbg(ep->dev, "%s: Request mismatch\n", __func__);
+		return -EINVAL;
+	}
+
+	/* queue head may be partially complete. */
+	if (ep->queue.next == &req->queue) {
+		if (ep->dma) {
+			ep_dbg(ep->dev, "unlink (%s) dma\n", _ep->name);
+			_req->status = -ECONNRESET;
+			abort_dma(ep);
+			if (likely(ep->queue.next == &req->queue)) {
+				/* NOTE: misreports single-transfer mode*/
+				req->td->dmacount = 0;	/* invalidate */
+				dma_done(ep, req,
+					readl(&ep->dma->dmacount),
+					-ECONNRESET);
+			}
+		} else {
+			ep_dbg(ep->dev, "unlink (%s) pio\n", _ep->name);
+			done(ep, req, -ECONNRESET);
+		}
+		req = NULL;
+	}
+
+	if (req)
+		done(ep, req, -ECONNRESET);
+	ep->stopped = stopped;
+
+	if (ep->dma) {
+		/* turn off dma on inactive queues */
+		if (list_empty(&ep->queue))
+			stop_dma(ep->dma);
+		else if (!ep->stopped) {
+			/* resume current request, or start new one */
+			if (req)
+				writel(dmactl, &ep->dma->dmactl);
+			else
+				start_dma(ep, list_entry(ep->queue.next,
+					struct net2280_request, queue));
+		}
+	}
+
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int net2280_fifo_status(struct usb_ep *_ep);
+
+static int
+net2280_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
+{
+	struct net2280_ep	*ep;
+	unsigned long		flags;
+	int			retval = 0;
+
+	ep = container_of(_ep, struct net2280_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0)) {
+		pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);
+		return -EINVAL;
+	}
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		retval = -ESHUTDOWN;
+		goto print_err;
+	}
+	if (ep->desc /* not ep0 */ && (ep->desc->bmAttributes & 0x03)
+						== USB_ENDPOINT_XFER_ISOC) {
+		retval = -EINVAL;
+		goto print_err;
+	}
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	if (!list_empty(&ep->queue)) {
+		retval = -EAGAIN;
+		goto print_unlock;
+	} else if (ep->is_in && value && net2280_fifo_status(_ep) != 0) {
+		retval = -EAGAIN;
+		goto print_unlock;
+	} else {
+		ep_vdbg(ep->dev, "%s %s %s\n", _ep->name,
+				value ? "set" : "clear",
+				wedged ? "wedge" : "halt");
+		/* set/clear, then synch memory views with the device */
+		if (value) {
+			if (ep->num == 0)
+				ep->dev->protocol_stall = 1;
+			else
+				set_halt(ep);
+			if (wedged)
+				ep->wedged = 1;
+		} else {
+			clear_halt(ep);
+			if (ep->dev->quirks & PLX_PCIE &&
+				!list_empty(&ep->queue) && ep->td_dma)
+					restart_dma(ep);
+			ep->wedged = 0;
+		}
+		(void) readl(&ep->regs->ep_rsp);
+	}
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+
+	return retval;
+
+print_unlock:
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+print_err:
+	dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, retval);
+	return retval;
+}
+
+static int net2280_set_halt(struct usb_ep *_ep, int value)
+{
+	return net2280_set_halt_and_wedge(_ep, value, 0);
+}
+
+static int net2280_set_wedge(struct usb_ep *_ep)
+{
+	if (!_ep || _ep->name == ep0name) {
+		pr_err("%s: Invalid ep=%p or ep0\n", __func__, _ep);
+		return -EINVAL;
+	}
+	return net2280_set_halt_and_wedge(_ep, 1, 1);
+}
+
+static int net2280_fifo_status(struct usb_ep *_ep)
+{
+	struct net2280_ep	*ep;
+	u32			avail;
+
+	ep = container_of(_ep, struct net2280_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0)) {
+		pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);
+		return -ENODEV;
+	}
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		dev_err(&ep->dev->pdev->dev,
+			"%s: Invalid driver=%p or speed=%d\n",
+			__func__, ep->dev->driver, ep->dev->gadget.speed);
+		return -ESHUTDOWN;
+	}
+
+	avail = readl(&ep->regs->ep_avail) & (BIT(12) - 1);
+	if (avail > ep->fifo_size) {
+		dev_err(&ep->dev->pdev->dev, "%s: Fifo overflow\n", __func__);
+		return -EOVERFLOW;
+	}
+	if (ep->is_in)
+		avail = ep->fifo_size - avail;
+	return avail;
+}
+
+static void net2280_fifo_flush(struct usb_ep *_ep)
+{
+	struct net2280_ep	*ep;
+
+	ep = container_of(_ep, struct net2280_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0)) {
+		pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);
+		return;
+	}
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		dev_err(&ep->dev->pdev->dev,
+			"%s: Invalid driver=%p or speed=%d\n",
+			__func__, ep->dev->driver, ep->dev->gadget.speed);
+		return;
+	}
+
+	writel(BIT(FIFO_FLUSH), &ep->regs->ep_stat);
+	(void) readl(&ep->regs->ep_rsp);
+}
+
+static const struct usb_ep_ops net2280_ep_ops = {
+	.enable		= net2280_enable,
+	.disable	= net2280_disable,
+
+	.alloc_request	= net2280_alloc_request,
+	.free_request	= net2280_free_request,
+
+	.queue		= net2280_queue,
+	.dequeue	= net2280_dequeue,
+
+	.set_halt	= net2280_set_halt,
+	.set_wedge	= net2280_set_wedge,
+	.fifo_status	= net2280_fifo_status,
+	.fifo_flush	= net2280_fifo_flush,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int net2280_get_frame(struct usb_gadget *_gadget)
+{
+	struct net2280		*dev;
+	unsigned long		flags;
+	u16			retval;
+
+	if (!_gadget)
+		return -ENODEV;
+	dev = container_of(_gadget, struct net2280, gadget);
+	spin_lock_irqsave(&dev->lock, flags);
+	retval = get_idx_reg(dev->regs, REG_FRAME) & 0x03ff;
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return retval;
+}
+
+static int net2280_wakeup(struct usb_gadget *_gadget)
+{
+	struct net2280		*dev;
+	u32			tmp;
+	unsigned long		flags;
+
+	if (!_gadget)
+		return 0;
+	dev = container_of(_gadget, struct net2280, gadget);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	tmp = readl(&dev->usb->usbctl);
+	if (tmp & BIT(DEVICE_REMOTE_WAKEUP_ENABLE))
+		writel(BIT(GENERATE_RESUME), &dev->usb->usbstat);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	/* pci writes may still be posted */
+	return 0;
+}
+
+static int net2280_set_selfpowered(struct usb_gadget *_gadget, int value)
+{
+	struct net2280		*dev;
+	u32			tmp;
+	unsigned long		flags;
+
+	if (!_gadget)
+		return 0;
+	dev = container_of(_gadget, struct net2280, gadget);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	tmp = readl(&dev->usb->usbctl);
+	if (value) {
+		tmp |= BIT(SELF_POWERED_STATUS);
+		_gadget->is_selfpowered = 1;
+	} else {
+		tmp &= ~BIT(SELF_POWERED_STATUS);
+		_gadget->is_selfpowered = 0;
+	}
+	writel(tmp, &dev->usb->usbctl);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+static int net2280_pullup(struct usb_gadget *_gadget, int is_on)
+{
+	struct net2280  *dev;
+	u32             tmp;
+	unsigned long   flags;
+
+	if (!_gadget)
+		return -ENODEV;
+	dev = container_of(_gadget, struct net2280, gadget);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	tmp = readl(&dev->usb->usbctl);
+	dev->softconnect = (is_on != 0);
+	if (is_on) {
+		ep0_start(dev);
+		writel(tmp | BIT(USB_DETECT_ENABLE), &dev->usb->usbctl);
+	} else {
+		writel(tmp & ~BIT(USB_DETECT_ENABLE), &dev->usb->usbctl);
+		stop_activity(dev, NULL);
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+static struct usb_ep *net2280_match_ep(struct usb_gadget *_gadget,
+		struct usb_endpoint_descriptor *desc,
+		struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+	char name[8];
+	struct usb_ep *ep;
+
+	if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT) {
+		/* ep-e, ep-f are PIO with only 64 byte fifos */
+		ep = gadget_find_ep_by_name(_gadget, "ep-e");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+		ep = gadget_find_ep_by_name(_gadget, "ep-f");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+	}
+
+	/* USB3380: Only first four endpoints have DMA channels. Allocate
+	 * slower interrupt endpoints from PIO hw endpoints, to allow bulk/isoc
+	 * endpoints use DMA hw endpoints.
+	 */
+	if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT &&
+	    usb_endpoint_dir_in(desc)) {
+		ep = gadget_find_ep_by_name(_gadget, "ep2in");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+		ep = gadget_find_ep_by_name(_gadget, "ep4in");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+	} else if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT &&
+		   !usb_endpoint_dir_in(desc)) {
+		ep = gadget_find_ep_by_name(_gadget, "ep1out");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+		ep = gadget_find_ep_by_name(_gadget, "ep3out");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+	} else if (usb_endpoint_type(desc) != USB_ENDPOINT_XFER_BULK &&
+		   usb_endpoint_dir_in(desc)) {
+		ep = gadget_find_ep_by_name(_gadget, "ep1in");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+		ep = gadget_find_ep_by_name(_gadget, "ep3in");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+	} else if (usb_endpoint_type(desc) != USB_ENDPOINT_XFER_BULK &&
+		   !usb_endpoint_dir_in(desc)) {
+		ep = gadget_find_ep_by_name(_gadget, "ep2out");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+		ep = gadget_find_ep_by_name(_gadget, "ep4out");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+	}
+
+	/* USB3380: use same address for usb and hardware endpoints */
+	snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
+			usb_endpoint_dir_in(desc) ? "in" : "out");
+	ep = gadget_find_ep_by_name(_gadget, name);
+	if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+		return ep;
+
+	return NULL;
+}
+
+static int net2280_start(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver);
+static int net2280_stop(struct usb_gadget *_gadget);
+static void net2280_async_callbacks(struct usb_gadget *_gadget, bool enable);
+
+static const struct usb_gadget_ops net2280_ops = {
+	.get_frame	= net2280_get_frame,
+	.wakeup		= net2280_wakeup,
+	.set_selfpowered = net2280_set_selfpowered,
+	.pullup		= net2280_pullup,
+	.udc_start	= net2280_start,
+	.udc_stop	= net2280_stop,
+	.udc_async_callbacks = net2280_async_callbacks,
+	.match_ep	= net2280_match_ep,
+};
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_USB_GADGET_DEBUG_FILES
+
+/* FIXME move these into procfs, and use seq_file.
+ * Sysfs _still_ doesn't behave for arbitrarily sized files,
+ * and also doesn't help products using this with 2.4 kernels.
+ */
+
+/* "function" sysfs attribute */
+static ssize_t function_show(struct device *_dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct net2280	*dev = dev_get_drvdata(_dev);
+
+	if (!dev->driver || !dev->driver->function ||
+			strlen(dev->driver->function) > PAGE_SIZE)
+		return 0;
+	return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function);
+}
+static DEVICE_ATTR_RO(function);
+
+static ssize_t registers_show(struct device *_dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct net2280		*dev;
+	char			*next;
+	unsigned		size, t;
+	unsigned long		flags;
+	int			i;
+	u32			t1, t2;
+	const char		*s;
+
+	dev = dev_get_drvdata(_dev);
+	next = buf;
+	size = PAGE_SIZE;
+	spin_lock_irqsave(&dev->lock, flags);
+
+	if (dev->driver)
+		s = dev->driver->driver.name;
+	else
+		s = "(none)";
+
+	/* Main Control Registers */
+	t = scnprintf(next, size, "%s version " DRIVER_VERSION
+			", chiprev %04x\n\n"
+			"devinit %03x fifoctl %08x gadget '%s'\n"
+			"pci irqenb0 %02x irqenb1 %08x "
+			"irqstat0 %04x irqstat1 %08x\n",
+			driver_name, dev->chiprev,
+			readl(&dev->regs->devinit),
+			readl(&dev->regs->fifoctl),
+			s,
+			readl(&dev->regs->pciirqenb0),
+			readl(&dev->regs->pciirqenb1),
+			readl(&dev->regs->irqstat0),
+			readl(&dev->regs->irqstat1));
+	size -= t;
+	next += t;
+
+	/* USB Control Registers */
+	t1 = readl(&dev->usb->usbctl);
+	t2 = readl(&dev->usb->usbstat);
+	if (t1 & BIT(VBUS_PIN)) {
+		if (t2 & BIT(HIGH_SPEED))
+			s = "high speed";
+		else if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+			s = "powered";
+		else
+			s = "full speed";
+		/* full speed bit (6) not working?? */
+	} else
+			s = "not attached";
+	t = scnprintf(next, size,
+			"stdrsp %08x usbctl %08x usbstat %08x "
+				"addr 0x%02x (%s)\n",
+			readl(&dev->usb->stdrsp), t1, t2,
+			readl(&dev->usb->ouraddr), s);
+	size -= t;
+	next += t;
+
+	/* PCI Master Control Registers */
+
+	/* DMA Control Registers */
+
+	/* Configurable EP Control Registers */
+	for (i = 0; i < dev->n_ep; i++) {
+		struct net2280_ep	*ep;
+
+		ep = &dev->ep[i];
+		if (i && !ep->desc)
+			continue;
+
+		t1 = readl(&ep->cfg->ep_cfg);
+		t2 = readl(&ep->regs->ep_rsp) & 0xff;
+		t = scnprintf(next, size,
+				"\n%s\tcfg %05x rsp (%02x) %s%s%s%s%s%s%s%s"
+					"irqenb %02x\n",
+				ep->ep.name, t1, t2,
+				(t2 & BIT(CLEAR_NAK_OUT_PACKETS))
+					? "NAK " : "",
+				(t2 & BIT(CLEAR_EP_HIDE_STATUS_PHASE))
+					? "hide " : "",
+				(t2 & BIT(CLEAR_EP_FORCE_CRC_ERROR))
+					? "CRC " : "",
+				(t2 & BIT(CLEAR_INTERRUPT_MODE))
+					? "interrupt " : "",
+				(t2 & BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE))
+					? "status " : "",
+				(t2 & BIT(CLEAR_NAK_OUT_PACKETS_MODE))
+					? "NAKmode " : "",
+				(t2 & BIT(CLEAR_ENDPOINT_TOGGLE))
+					? "DATA1 " : "DATA0 ",
+				(t2 & BIT(CLEAR_ENDPOINT_HALT))
+					? "HALT " : "",
+				readl(&ep->regs->ep_irqenb));
+		size -= t;
+		next += t;
+
+		t = scnprintf(next, size,
+				"\tstat %08x avail %04x "
+				"(ep%d%s-%s)%s\n",
+				readl(&ep->regs->ep_stat),
+				readl(&ep->regs->ep_avail),
+				t1 & 0x0f, DIR_STRING(t1),
+				type_string(t1 >> 8),
+				ep->stopped ? "*" : "");
+		size -= t;
+		next += t;
+
+		if (!ep->dma)
+			continue;
+
+		t = scnprintf(next, size,
+				"  dma\tctl %08x stat %08x count %08x\n"
+				"\taddr %08x desc %08x\n",
+				readl(&ep->dma->dmactl),
+				readl(&ep->dma->dmastat),
+				readl(&ep->dma->dmacount),
+				readl(&ep->dma->dmaaddr),
+				readl(&ep->dma->dmadesc));
+		size -= t;
+		next += t;
+
+	}
+
+	/* Indexed Registers (none yet) */
+
+	/* Statistics */
+	t = scnprintf(next, size, "\nirqs:  ");
+	size -= t;
+	next += t;
+	for (i = 0; i < dev->n_ep; i++) {
+		struct net2280_ep	*ep;
+
+		ep = &dev->ep[i];
+		if (i && !ep->irqs)
+			continue;
+		t = scnprintf(next, size, " %s/%lu", ep->ep.name, ep->irqs);
+		size -= t;
+		next += t;
+
+	}
+	t = scnprintf(next, size, "\n");
+	size -= t;
+	next += t;
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return PAGE_SIZE - size;
+}
+static DEVICE_ATTR_RO(registers);
+
+static ssize_t queues_show(struct device *_dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct net2280		*dev;
+	char			*next;
+	unsigned		size;
+	unsigned long		flags;
+	int			i;
+
+	dev = dev_get_drvdata(_dev);
+	next = buf;
+	size = PAGE_SIZE;
+	spin_lock_irqsave(&dev->lock, flags);
+
+	for (i = 0; i < dev->n_ep; i++) {
+		struct net2280_ep		*ep = &dev->ep[i];
+		struct net2280_request		*req;
+		int				t;
+
+		if (i != 0) {
+			const struct usb_endpoint_descriptor	*d;
+
+			d = ep->desc;
+			if (!d)
+				continue;
+			t = d->bEndpointAddress;
+			t = scnprintf(next, size,
+				"\n%s (ep%d%s-%s) max %04x %s fifo %d\n",
+				ep->ep.name, t & USB_ENDPOINT_NUMBER_MASK,
+				(t & USB_DIR_IN) ? "in" : "out",
+				type_string(d->bmAttributes),
+				usb_endpoint_maxp(d),
+				ep->dma ? "dma" : "pio", ep->fifo_size
+				);
+		} else /* ep0 should only have one transfer queued */
+			t = scnprintf(next, size, "ep0 max 64 pio %s\n",
+					ep->is_in ? "in" : "out");
+		if (t <= 0 || t > size)
+			goto done;
+		size -= t;
+		next += t;
+
+		if (list_empty(&ep->queue)) {
+			t = scnprintf(next, size, "\t(nothing queued)\n");
+			if (t <= 0 || t > size)
+				goto done;
+			size -= t;
+			next += t;
+			continue;
+		}
+		list_for_each_entry(req, &ep->queue, queue) {
+			if (ep->dma && req->td_dma == readl(&ep->dma->dmadesc))
+				t = scnprintf(next, size,
+					"\treq %p len %d/%d "
+					"buf %p (dmacount %08x)\n",
+					&req->req, req->req.actual,
+					req->req.length, req->req.buf,
+					readl(&ep->dma->dmacount));
+			else
+				t = scnprintf(next, size,
+					"\treq %p len %d/%d buf %p\n",
+					&req->req, req->req.actual,
+					req->req.length, req->req.buf);
+			if (t <= 0 || t > size)
+				goto done;
+			size -= t;
+			next += t;
+
+			if (ep->dma) {
+				struct net2280_dma	*td;
+
+				td = req->td;
+				t = scnprintf(next, size, "\t    td %08x "
+					" count %08x buf %08x desc %08x\n",
+					(u32) req->td_dma,
+					le32_to_cpu(td->dmacount),
+					le32_to_cpu(td->dmaaddr),
+					le32_to_cpu(td->dmadesc));
+				if (t <= 0 || t > size)
+					goto done;
+				size -= t;
+				next += t;
+			}
+		}
+	}
+
+done:
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return PAGE_SIZE - size;
+}
+static DEVICE_ATTR_RO(queues);
+
+
+#else
+
+#define device_create_file(a, b)	(0)
+#define device_remove_file(a, b)	do { } while (0)
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* another driver-specific mode might be a request type doing dma
+ * to/from another device fifo instead of to/from memory.
+ */
+
+static void set_fifo_mode(struct net2280 *dev, int mode)
+{
+	/* keeping high bits preserves BAR2 */
+	writel((0xffff << PCI_BASE2_RANGE) | mode, &dev->regs->fifoctl);
+
+	/* always ep-{a,b,e,f} ... maybe not ep-c or ep-d */
+	INIT_LIST_HEAD(&dev->gadget.ep_list);
+	list_add_tail(&dev->ep[1].ep.ep_list, &dev->gadget.ep_list);
+	list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list);
+	switch (mode) {
+	case 0:
+		list_add_tail(&dev->ep[3].ep.ep_list, &dev->gadget.ep_list);
+		list_add_tail(&dev->ep[4].ep.ep_list, &dev->gadget.ep_list);
+		dev->ep[1].fifo_size = dev->ep[2].fifo_size = 1024;
+		break;
+	case 1:
+		dev->ep[1].fifo_size = dev->ep[2].fifo_size = 2048;
+		break;
+	case 2:
+		list_add_tail(&dev->ep[3].ep.ep_list, &dev->gadget.ep_list);
+		dev->ep[1].fifo_size = 2048;
+		dev->ep[2].fifo_size = 1024;
+		break;
+	}
+	/* fifo sizes for ep0, ep-c, ep-d, ep-e, and ep-f never change */
+	list_add_tail(&dev->ep[5].ep.ep_list, &dev->gadget.ep_list);
+	list_add_tail(&dev->ep[6].ep.ep_list, &dev->gadget.ep_list);
+}
+
+static void defect7374_disable_data_eps(struct net2280 *dev)
+{
+	/*
+	 * For Defect 7374, disable data EPs (and more):
+	 *  - This phase undoes the earlier phase of the Defect 7374 workaround,
+	 *    returing ep regs back to normal.
+	 */
+	struct net2280_ep *ep;
+	int i;
+	unsigned char ep_sel;
+	u32 tmp_reg;
+
+	for (i = 1; i < 5; i++) {
+		ep = &dev->ep[i];
+		writel(i, &ep->cfg->ep_cfg);
+	}
+
+	/* CSROUT, CSRIN, PCIOUT, PCIIN, STATIN, RCIN */
+	for (i = 0; i < 6; i++)
+		writel(0, &dev->dep[i].dep_cfg);
+
+	for (ep_sel = 0; ep_sel <= 21; ep_sel++) {
+		/* Select an endpoint for subsequent operations: */
+		tmp_reg = readl(&dev->plregs->pl_ep_ctrl);
+		writel(((tmp_reg & ~0x1f) | ep_sel), &dev->plregs->pl_ep_ctrl);
+
+		if (ep_sel < 2 || (ep_sel > 9 && ep_sel < 14) ||
+					ep_sel == 18 || ep_sel == 20)
+			continue;
+
+		/* Change settings on some selected endpoints */
+		tmp_reg = readl(&dev->plregs->pl_ep_cfg_4);
+		tmp_reg &= ~BIT(NON_CTRL_IN_TOLERATE_BAD_DIR);
+		writel(tmp_reg, &dev->plregs->pl_ep_cfg_4);
+		tmp_reg = readl(&dev->plregs->pl_ep_ctrl);
+		tmp_reg |= BIT(EP_INITIALIZED);
+		writel(tmp_reg, &dev->plregs->pl_ep_ctrl);
+	}
+}
+
+static void defect7374_enable_data_eps_zero(struct net2280 *dev)
+{
+	u32 tmp = 0, tmp_reg;
+	u32 scratch;
+	int i;
+	unsigned char ep_sel;
+
+	scratch = get_idx_reg(dev->regs, SCRATCH);
+
+	WARN_ON((scratch & (0xf << DEFECT7374_FSM_FIELD))
+		== DEFECT7374_FSM_SS_CONTROL_READ);
+
+	scratch &= ~(0xf << DEFECT7374_FSM_FIELD);
+
+	ep_warn(dev, "Operate Defect 7374 workaround soft this time");
+	ep_warn(dev, "It will operate on cold-reboot and SS connect");
+
+	/*GPEPs:*/
+	tmp = ((0 << ENDPOINT_NUMBER) | BIT(ENDPOINT_DIRECTION) |
+			(2 << OUT_ENDPOINT_TYPE) | (2 << IN_ENDPOINT_TYPE) |
+			((dev->enhanced_mode) ?
+			 BIT(OUT_ENDPOINT_ENABLE) | BIT(IN_ENDPOINT_ENABLE) :
+			 BIT(ENDPOINT_ENABLE)));
+
+	for (i = 1; i < 5; i++)
+		writel(tmp, &dev->ep[i].cfg->ep_cfg);
+
+	/* CSRIN, PCIIN, STATIN, RCIN*/
+	tmp = ((0 << ENDPOINT_NUMBER) | BIT(ENDPOINT_ENABLE));
+	writel(tmp, &dev->dep[1].dep_cfg);
+	writel(tmp, &dev->dep[3].dep_cfg);
+	writel(tmp, &dev->dep[4].dep_cfg);
+	writel(tmp, &dev->dep[5].dep_cfg);
+
+	/*Implemented for development and debug.
+	 * Can be refined/tuned later.*/
+	for (ep_sel = 0; ep_sel <= 21; ep_sel++) {
+		/* Select an endpoint for subsequent operations: */
+		tmp_reg = readl(&dev->plregs->pl_ep_ctrl);
+		writel(((tmp_reg & ~0x1f) | ep_sel),
+				&dev->plregs->pl_ep_ctrl);
+
+		if (ep_sel == 1) {
+			tmp =
+				(readl(&dev->plregs->pl_ep_ctrl) |
+				 BIT(CLEAR_ACK_ERROR_CODE) | 0);
+			writel(tmp, &dev->plregs->pl_ep_ctrl);
+			continue;
+		}
+
+		if (ep_sel == 0 || (ep_sel > 9 && ep_sel < 14) ||
+				ep_sel == 18  || ep_sel == 20)
+			continue;
+
+		tmp = (readl(&dev->plregs->pl_ep_cfg_4) |
+				BIT(NON_CTRL_IN_TOLERATE_BAD_DIR) | 0);
+		writel(tmp, &dev->plregs->pl_ep_cfg_4);
+
+		tmp = readl(&dev->plregs->pl_ep_ctrl) &
+			~BIT(EP_INITIALIZED);
+		writel(tmp, &dev->plregs->pl_ep_ctrl);
+
+	}
+
+	/* Set FSM to focus on the first Control Read:
+	 * - Tip: Connection speed is known upon the first
+	 * setup request.*/
+	scratch |= DEFECT7374_FSM_WAITING_FOR_CONTROL_READ;
+	set_idx_reg(dev->regs, SCRATCH, scratch);
+
+}
+
+/* keeping it simple:
+ * - one bus driver, initted first;
+ * - one function driver, initted second
+ *
+ * most of the work to support multiple net2280 controllers would
+ * be to associate this gadget driver (yes?) with all of them, or
+ * perhaps to bind specific drivers to specific devices.
+ */
+
+static void usb_reset_228x(struct net2280 *dev)
+{
+	u32	tmp;
+
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+	(void) readl(&dev->usb->usbctl);
+
+	net2280_led_init(dev);
+
+	/* disable automatic responses, and irqs */
+	writel(0, &dev->usb->stdrsp);
+	writel(0, &dev->regs->pciirqenb0);
+	writel(0, &dev->regs->pciirqenb1);
+
+	/* clear old dma and irq state */
+	for (tmp = 0; tmp < 4; tmp++) {
+		struct net2280_ep       *ep = &dev->ep[tmp + 1];
+		if (ep->dma)
+			abort_dma(ep);
+	}
+
+	writel(~0, &dev->regs->irqstat0),
+	writel(~(u32)BIT(SUSPEND_REQUEST_INTERRUPT), &dev->regs->irqstat1),
+
+	/* reset, and enable pci */
+	tmp = readl(&dev->regs->devinit) |
+		BIT(PCI_ENABLE) |
+		BIT(FIFO_SOFT_RESET) |
+		BIT(USB_SOFT_RESET) |
+		BIT(M8051_RESET);
+	writel(tmp, &dev->regs->devinit);
+
+	/* standard fifo and endpoint allocations */
+	set_fifo_mode(dev, (fifo_mode <= 2) ? fifo_mode : 0);
+}
+
+static void usb_reset_338x(struct net2280 *dev)
+{
+	u32 tmp;
+
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+	(void)readl(&dev->usb->usbctl);
+
+	net2280_led_init(dev);
+
+	if (dev->bug7734_patched) {
+		/* disable automatic responses, and irqs */
+		writel(0, &dev->usb->stdrsp);
+		writel(0, &dev->regs->pciirqenb0);
+		writel(0, &dev->regs->pciirqenb1);
+	}
+
+	/* clear old dma and irq state */
+	for (tmp = 0; tmp < 4; tmp++) {
+		struct net2280_ep *ep = &dev->ep[tmp + 1];
+		struct net2280_dma_regs __iomem *dma;
+
+		if (ep->dma) {
+			abort_dma(ep);
+		} else {
+			dma = &dev->dma[tmp];
+			writel(BIT(DMA_ABORT), &dma->dmastat);
+			writel(0, &dma->dmactl);
+		}
+	}
+
+	writel(~0, &dev->regs->irqstat0), writel(~0, &dev->regs->irqstat1);
+
+	if (dev->bug7734_patched) {
+		/* reset, and enable pci */
+		tmp = readl(&dev->regs->devinit) |
+		    BIT(PCI_ENABLE) |
+		    BIT(FIFO_SOFT_RESET) |
+		    BIT(USB_SOFT_RESET) |
+		    BIT(M8051_RESET);
+
+		writel(tmp, &dev->regs->devinit);
+	}
+
+	/* always ep-{1,2,3,4} ... maybe not ep-3 or ep-4 */
+	INIT_LIST_HEAD(&dev->gadget.ep_list);
+
+	for (tmp = 1; tmp < dev->n_ep; tmp++)
+		list_add_tail(&dev->ep[tmp].ep.ep_list, &dev->gadget.ep_list);
+
+}
+
+static void usb_reset(struct net2280 *dev)
+{
+	if (dev->quirks & PLX_LEGACY)
+		return usb_reset_228x(dev);
+	return usb_reset_338x(dev);
+}
+
+static void usb_reinit_228x(struct net2280 *dev)
+{
+	u32	tmp;
+
+	/* basic endpoint init */
+	for (tmp = 0; tmp < 7; tmp++) {
+		struct net2280_ep	*ep = &dev->ep[tmp];
+
+		ep->ep.name = ep_info_dft[tmp].name;
+		ep->ep.caps = ep_info_dft[tmp].caps;
+		ep->dev = dev;
+		ep->num = tmp;
+
+		if (tmp > 0 && tmp <= 4) {
+			ep->fifo_size = 1024;
+			ep->dma = &dev->dma[tmp - 1];
+		} else
+			ep->fifo_size = 64;
+		ep->regs = &dev->epregs[tmp];
+		ep->cfg = &dev->epregs[tmp];
+		ep_reset_228x(dev->regs, ep);
+	}
+	usb_ep_set_maxpacket_limit(&dev->ep[0].ep, 64);
+	usb_ep_set_maxpacket_limit(&dev->ep[5].ep, 64);
+	usb_ep_set_maxpacket_limit(&dev->ep[6].ep, 64);
+
+	dev->gadget.ep0 = &dev->ep[0].ep;
+	dev->ep[0].stopped = 0;
+	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+
+	/* we want to prevent lowlevel/insecure access from the USB host,
+	 * but erratum 0119 means this enable bit is ignored
+	 */
+	for (tmp = 0; tmp < 5; tmp++)
+		writel(EP_DONTUSE, &dev->dep[tmp].dep_cfg);
+}
+
+static void usb_reinit_338x(struct net2280 *dev)
+{
+	int i;
+	u32 tmp, val;
+	static const u32 ne[9] = { 0, 1, 2, 3, 4, 1, 2, 3, 4 };
+	static const u32 ep_reg_addr[9] = { 0x00, 0xC0, 0x00, 0xC0, 0x00,
+						0x00, 0xC0, 0x00, 0xC0 };
+
+	/* basic endpoint init */
+	for (i = 0; i < dev->n_ep; i++) {
+		struct net2280_ep *ep = &dev->ep[i];
+
+		ep->ep.name = dev->enhanced_mode ? ep_info_adv[i].name :
+						   ep_info_dft[i].name;
+		ep->ep.caps = dev->enhanced_mode ? ep_info_adv[i].caps :
+						   ep_info_dft[i].caps;
+		ep->dev = dev;
+		ep->num = i;
+
+		if (i > 0 && i <= 4)
+			ep->dma = &dev->dma[i - 1];
+
+		if (dev->enhanced_mode) {
+			ep->cfg = &dev->epregs[ne[i]];
+			/*
+			 * Set USB endpoint number, hardware allows same number
+			 * in both directions.
+			 */
+			 if (i > 0 && i < 5)
+				writel(ne[i], &ep->cfg->ep_cfg);
+			ep->regs = (struct net2280_ep_regs __iomem *)
+				(((void __iomem *)&dev->epregs[ne[i]]) +
+				ep_reg_addr[i]);
+		} else {
+			ep->cfg = &dev->epregs[i];
+			ep->regs = &dev->epregs[i];
+		}
+
+		ep->fifo_size = (i != 0) ? 2048 : 512;
+
+		ep_reset_338x(dev->regs, ep);
+	}
+	usb_ep_set_maxpacket_limit(&dev->ep[0].ep, 512);
+
+	dev->gadget.ep0 = &dev->ep[0].ep;
+	dev->ep[0].stopped = 0;
+
+	/* Link layer set up */
+	if (dev->bug7734_patched) {
+		tmp = readl(&dev->usb_ext->usbctl2) &
+		    ~(BIT(U1_ENABLE) | BIT(U2_ENABLE) | BIT(LTM_ENABLE));
+		writel(tmp, &dev->usb_ext->usbctl2);
+	}
+
+	/* Hardware Defect and Workaround */
+	val = readl(&dev->llregs->ll_lfps_5);
+	val &= ~(0xf << TIMER_LFPS_6US);
+	val |= 0x5 << TIMER_LFPS_6US;
+	writel(val, &dev->llregs->ll_lfps_5);
+
+	val = readl(&dev->llregs->ll_lfps_6);
+	val &= ~(0xffff << TIMER_LFPS_80US);
+	val |= 0x0100 << TIMER_LFPS_80US;
+	writel(val, &dev->llregs->ll_lfps_6);
+
+	/*
+	 * AA_AB Errata. Issue 4. Workaround for SuperSpeed USB
+	 * Hot Reset Exit Handshake may Fail in Specific Case using
+	 * Default Register Settings. Workaround for Enumeration test.
+	 */
+	val = readl(&dev->llregs->ll_tsn_counters_2);
+	val &= ~(0x1f << HOT_TX_NORESET_TS2);
+	val |= 0x10 << HOT_TX_NORESET_TS2;
+	writel(val, &dev->llregs->ll_tsn_counters_2);
+
+	val = readl(&dev->llregs->ll_tsn_counters_3);
+	val &= ~(0x1f << HOT_RX_RESET_TS2);
+	val |= 0x3 << HOT_RX_RESET_TS2;
+	writel(val, &dev->llregs->ll_tsn_counters_3);
+
+	/*
+	 * AB errata. Errata 11. Workaround for Default Duration of LFPS
+	 * Handshake Signaling for Device-Initiated U1 Exit is too short.
+	 * Without this, various enumeration failures observed with
+	 * modern superspeed hosts.
+	 */
+	val = readl(&dev->llregs->ll_lfps_timers_2);
+	writel((val & 0xffff0000) | LFPS_TIMERS_2_WORKAROUND_VALUE,
+	       &dev->llregs->ll_lfps_timers_2);
+
+	/*
+	 * Set Recovery Idle to Recover bit:
+	 * - On SS connections, setting Recovery Idle to Recover Fmw improves
+	 *   link robustness with various hosts and hubs.
+	 * - It is safe to set for all connection speeds; all chip revisions.
+	 * - R-M-W to leave other bits undisturbed.
+	 * - Reference PLX TT-7372
+	*/
+	val = readl(&dev->llregs->ll_tsn_chicken_bit);
+	val |= BIT(RECOVERY_IDLE_TO_RECOVER_FMW);
+	writel(val, &dev->llregs->ll_tsn_chicken_bit);
+
+	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+
+	/* disable dedicated endpoints */
+	writel(0x0D, &dev->dep[0].dep_cfg);
+	writel(0x0D, &dev->dep[1].dep_cfg);
+	writel(0x0E, &dev->dep[2].dep_cfg);
+	writel(0x0E, &dev->dep[3].dep_cfg);
+	writel(0x0F, &dev->dep[4].dep_cfg);
+	writel(0x0C, &dev->dep[5].dep_cfg);
+}
+
+static void usb_reinit(struct net2280 *dev)
+{
+	if (dev->quirks & PLX_LEGACY)
+		return usb_reinit_228x(dev);
+	return usb_reinit_338x(dev);
+}
+
+static void ep0_start_228x(struct net2280 *dev)
+{
+	writel(BIT(CLEAR_EP_HIDE_STATUS_PHASE) |
+		BIT(CLEAR_NAK_OUT_PACKETS) |
+		BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE),
+		&dev->epregs[0].ep_rsp);
+
+	/*
+	 * hardware optionally handles a bunch of standard requests
+	 * that the API hides from drivers anyway.  have it do so.
+	 * endpoint status/features are handled in software, to
+	 * help pass tests for some dubious behavior.
+	 */
+	writel(BIT(SET_TEST_MODE) |
+		BIT(SET_ADDRESS) |
+		BIT(DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP) |
+		BIT(GET_DEVICE_STATUS) |
+		BIT(GET_INTERFACE_STATUS),
+		&dev->usb->stdrsp);
+	writel(BIT(USB_ROOT_PORT_WAKEUP_ENABLE) |
+		BIT(SELF_POWERED_USB_DEVICE) |
+		BIT(REMOTE_WAKEUP_SUPPORT) |
+		(dev->softconnect << USB_DETECT_ENABLE) |
+		BIT(SELF_POWERED_STATUS),
+		&dev->usb->usbctl);
+
+	/* enable irqs so we can see ep0 and general operation  */
+	writel(BIT(SETUP_PACKET_INTERRUPT_ENABLE) |
+		BIT(ENDPOINT_0_INTERRUPT_ENABLE),
+		&dev->regs->pciirqenb0);
+	writel(BIT(PCI_INTERRUPT_ENABLE) |
+		BIT(PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE) |
+		BIT(PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE) |
+		BIT(PCI_RETRY_ABORT_INTERRUPT_ENABLE) |
+		BIT(VBUS_INTERRUPT_ENABLE) |
+		BIT(ROOT_PORT_RESET_INTERRUPT_ENABLE) |
+		BIT(SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE),
+		&dev->regs->pciirqenb1);
+
+	/* don't leave any writes posted */
+	(void) readl(&dev->usb->usbctl);
+}
+
+static void ep0_start_338x(struct net2280 *dev)
+{
+
+	if (dev->bug7734_patched)
+		writel(BIT(CLEAR_NAK_OUT_PACKETS_MODE) |
+		       BIT(SET_EP_HIDE_STATUS_PHASE),
+		       &dev->epregs[0].ep_rsp);
+
+	/*
+	 * hardware optionally handles a bunch of standard requests
+	 * that the API hides from drivers anyway.  have it do so.
+	 * endpoint status/features are handled in software, to
+	 * help pass tests for some dubious behavior.
+	 */
+	writel(BIT(SET_ISOCHRONOUS_DELAY) |
+	       BIT(SET_SEL) |
+	       BIT(SET_TEST_MODE) |
+	       BIT(SET_ADDRESS) |
+	       BIT(GET_INTERFACE_STATUS) |
+	       BIT(GET_DEVICE_STATUS),
+		&dev->usb->stdrsp);
+	dev->wakeup_enable = 1;
+	writel(BIT(USB_ROOT_PORT_WAKEUP_ENABLE) |
+	       (dev->softconnect << USB_DETECT_ENABLE) |
+	       BIT(DEVICE_REMOTE_WAKEUP_ENABLE),
+	       &dev->usb->usbctl);
+
+	/* enable irqs so we can see ep0 and general operation  */
+	writel(BIT(SETUP_PACKET_INTERRUPT_ENABLE) |
+	       BIT(ENDPOINT_0_INTERRUPT_ENABLE),
+	       &dev->regs->pciirqenb0);
+	writel(BIT(PCI_INTERRUPT_ENABLE) |
+	       BIT(ROOT_PORT_RESET_INTERRUPT_ENABLE) |
+	       BIT(SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE) |
+	       BIT(VBUS_INTERRUPT_ENABLE),
+	       &dev->regs->pciirqenb1);
+
+	/* don't leave any writes posted */
+	(void)readl(&dev->usb->usbctl);
+}
+
+static void ep0_start(struct net2280 *dev)
+{
+	if (dev->quirks & PLX_LEGACY)
+		return ep0_start_228x(dev);
+	return ep0_start_338x(dev);
+}
+
+/* when a driver is successfully registered, it will receive
+ * control requests including set_configuration(), which enables
+ * non-control requests.  then usb traffic follows until a
+ * disconnect is reported.  then a host may connect again, or
+ * the driver might get unbound.
+ */
+static int net2280_start(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct net2280		*dev;
+	int			retval;
+	unsigned		i;
+
+	/* insist on high speed support from the driver, since
+	 * (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE)
+	 * "must not be used in normal operation"
+	 */
+	if (!driver || driver->max_speed < USB_SPEED_HIGH ||
+			!driver->setup)
+		return -EINVAL;
+
+	dev = container_of(_gadget, struct net2280, gadget);
+
+	for (i = 0; i < dev->n_ep; i++)
+		dev->ep[i].irqs = 0;
+
+	/* hook up the driver ... */
+	dev->driver = driver;
+
+	retval = device_create_file(&dev->pdev->dev, &dev_attr_function);
+	if (retval)
+		goto err_unbind;
+	retval = device_create_file(&dev->pdev->dev, &dev_attr_queues);
+	if (retval)
+		goto err_func;
+
+	/* enable host detection and ep0; and we're ready
+	 * for set_configuration as well as eventual disconnect.
+	 */
+	net2280_led_active(dev, 1);
+
+	if ((dev->quirks & PLX_PCIE) && !dev->bug7734_patched)
+		defect7374_enable_data_eps_zero(dev);
+
+	ep0_start(dev);
+
+	/* pci writes may still be posted */
+	return 0;
+
+err_func:
+	device_remove_file(&dev->pdev->dev, &dev_attr_function);
+err_unbind:
+	dev->driver = NULL;
+	return retval;
+}
+
+static void stop_activity(struct net2280 *dev, struct usb_gadget_driver *driver)
+{
+	int			i;
+
+	/* don't disconnect if it's not connected */
+	if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+
+	/* stop hardware; prevent new request submissions;
+	 * and kill any outstanding requests.
+	 */
+	usb_reset(dev);
+	for (i = 0; i < dev->n_ep; i++)
+		nuke(&dev->ep[i]);
+
+	/* report disconnect; the driver is already quiesced */
+	if (dev->async_callbacks && driver) {
+		spin_unlock(&dev->lock);
+		driver->disconnect(&dev->gadget);
+		spin_lock(&dev->lock);
+	}
+
+	usb_reinit(dev);
+}
+
+static int net2280_stop(struct usb_gadget *_gadget)
+{
+	struct net2280	*dev;
+	unsigned long	flags;
+
+	dev = container_of(_gadget, struct net2280, gadget);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	stop_activity(dev, NULL);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	net2280_led_active(dev, 0);
+
+	device_remove_file(&dev->pdev->dev, &dev_attr_function);
+	device_remove_file(&dev->pdev->dev, &dev_attr_queues);
+
+	dev->driver = NULL;
+
+	return 0;
+}
+
+static void net2280_async_callbacks(struct usb_gadget *_gadget, bool enable)
+{
+	struct net2280	*dev = container_of(_gadget, struct net2280, gadget);
+
+	spin_lock_irq(&dev->lock);
+	dev->async_callbacks = enable;
+	spin_unlock_irq(&dev->lock);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* handle ep0, ep-e, ep-f with 64 byte packets: packet per irq.
+ * also works for dma-capable endpoints, in pio mode or just
+ * to manually advance the queue after short OUT transfers.
+ */
+static void handle_ep_small(struct net2280_ep *ep)
+{
+	struct net2280_request	*req;
+	u32			t;
+	/* 0 error, 1 mid-data, 2 done */
+	int			mode = 1;
+
+	if (!list_empty(&ep->queue))
+		req = list_entry(ep->queue.next,
+			struct net2280_request, queue);
+	else
+		req = NULL;
+
+	/* ack all, and handle what we care about */
+	t = readl(&ep->regs->ep_stat);
+	ep->irqs++;
+
+	ep_vdbg(ep->dev, "%s ack ep_stat %08x, req %p\n",
+			ep->ep.name, t, req ? &req->req : NULL);
+
+	if (!ep->is_in || (ep->dev->quirks & PLX_2280))
+		writel(t & ~BIT(NAK_OUT_PACKETS), &ep->regs->ep_stat);
+	else
+		/* Added for 2282 */
+		writel(t, &ep->regs->ep_stat);
+
+	/* for ep0, monitor token irqs to catch data stage length errors
+	 * and to synchronize on status.
+	 *
+	 * also, to defer reporting of protocol stalls ... here's where
+	 * data or status first appears, handling stalls here should never
+	 * cause trouble on the host side..
+	 *
+	 * control requests could be slightly faster without token synch for
+	 * status, but status can jam up that way.
+	 */
+	if (unlikely(ep->num == 0)) {
+		if (ep->is_in) {
+			/* status; stop NAKing */
+			if (t & BIT(DATA_OUT_PING_TOKEN_INTERRUPT)) {
+				if (ep->dev->protocol_stall) {
+					ep->stopped = 1;
+					set_halt(ep);
+				}
+				if (!req)
+					allow_status(ep);
+				mode = 2;
+			/* reply to extra IN data tokens with a zlp */
+			} else if (t & BIT(DATA_IN_TOKEN_INTERRUPT)) {
+				if (ep->dev->protocol_stall) {
+					ep->stopped = 1;
+					set_halt(ep);
+					mode = 2;
+				} else if (ep->responded &&
+						!req && !ep->stopped)
+					write_fifo(ep, NULL);
+			}
+		} else {
+			/* status; stop NAKing */
+			if (t & BIT(DATA_IN_TOKEN_INTERRUPT)) {
+				if (ep->dev->protocol_stall) {
+					ep->stopped = 1;
+					set_halt(ep);
+				}
+				mode = 2;
+			/* an extra OUT token is an error */
+			} else if (((t & BIT(DATA_OUT_PING_TOKEN_INTERRUPT)) &&
+					req &&
+					req->req.actual == req->req.length) ||
+					(ep->responded && !req)) {
+				ep->dev->protocol_stall = 1;
+				set_halt(ep);
+				ep->stopped = 1;
+				if (req)
+					done(ep, req, -EOVERFLOW);
+				req = NULL;
+			}
+		}
+	}
+
+	if (unlikely(!req))
+		return;
+
+	/* manual DMA queue advance after short OUT */
+	if (likely(ep->dma)) {
+		if (t & BIT(SHORT_PACKET_TRANSFERRED_INTERRUPT)) {
+			struct net2280_request *stuck_req = NULL;
+			int	stopped = ep->stopped;
+			int	num_completed;
+			int	stuck = 0;
+			u32	count;
+
+			/* TRANSFERRED works around OUT_DONE erratum 0112.
+			 * we expect (N <= maxpacket) bytes; host wrote M.
+			 * iff (M < N) we won't ever see a DMA interrupt.
+			 */
+			ep->stopped = 1;
+			for (count = 0; ; t = readl(&ep->regs->ep_stat)) {
+
+				/* any preceding dma transfers must finish.
+				 * dma handles (M >= N), may empty the queue
+				 */
+				num_completed = scan_dma_completions(ep);
+				if (unlikely(list_empty(&ep->queue) ||
+						ep->out_overflow)) {
+					req = NULL;
+					break;
+				}
+				req = list_entry(ep->queue.next,
+					struct net2280_request, queue);
+
+				/* here either (M < N), a "real" short rx;
+				 * or (M == N) and the queue didn't empty
+				 */
+				if (likely(t & BIT(FIFO_EMPTY))) {
+					count = readl(&ep->dma->dmacount);
+					count &= DMA_BYTE_COUNT_MASK;
+					if (readl(&ep->dma->dmadesc)
+							!= req->td_dma)
+						req = NULL;
+					break;
+				}
+
+				/* Escape loop if no dma transfers completed
+				 * after few retries.
+				 */
+				if (num_completed == 0) {
+					if (stuck_req == req &&
+					    readl(&ep->dma->dmadesc) !=
+						  req->td_dma && stuck++ > 5) {
+						count = readl(
+							&ep->dma->dmacount);
+						count &= DMA_BYTE_COUNT_MASK;
+						req = NULL;
+						ep_dbg(ep->dev, "%s escape stuck %d, count %u\n",
+							ep->ep.name, stuck,
+							count);
+						break;
+					} else if (stuck_req != req) {
+						stuck_req = req;
+						stuck = 0;
+					}
+				} else {
+					stuck_req = NULL;
+					stuck = 0;
+				}
+
+				udelay(1);
+			}
+
+			/* stop DMA, leave ep NAKing */
+			writel(BIT(DMA_ABORT), &ep->dma->dmastat);
+			spin_stop_dma(ep->dma);
+
+			if (likely(req)) {
+				req->td->dmacount = 0;
+				t = readl(&ep->regs->ep_avail);
+				dma_done(ep, req, count,
+					(ep->out_overflow || t)
+						? -EOVERFLOW : 0);
+			}
+
+			/* also flush to prevent erratum 0106 trouble */
+			if (unlikely(ep->out_overflow ||
+					(ep->dev->chiprev == 0x0100 &&
+					ep->dev->gadget.speed
+					== USB_SPEED_FULL))) {
+				out_flush(ep);
+				ep->out_overflow = 0;
+			}
+
+			/* (re)start dma if needed, stop NAKing */
+			ep->stopped = stopped;
+			if (!list_empty(&ep->queue))
+				restart_dma(ep);
+		} else
+			ep_dbg(ep->dev, "%s dma ep_stat %08x ??\n",
+					ep->ep.name, t);
+		return;
+
+	/* data packet(s) received (in the fifo, OUT) */
+	} else if (t & BIT(DATA_PACKET_RECEIVED_INTERRUPT)) {
+		if (read_fifo(ep, req) && ep->num != 0)
+			mode = 2;
+
+	/* data packet(s) transmitted (IN) */
+	} else if (t & BIT(DATA_PACKET_TRANSMITTED_INTERRUPT)) {
+		unsigned	len;
+
+		len = req->req.length - req->req.actual;
+		if (len > ep->ep.maxpacket)
+			len = ep->ep.maxpacket;
+		req->req.actual += len;
+
+		/* if we wrote it all, we're usually done */
+		/* send zlps until the status stage */
+		if ((req->req.actual == req->req.length) &&
+			(!req->req.zero || len != ep->ep.maxpacket) && ep->num)
+				mode = 2;
+
+	/* there was nothing to do ...  */
+	} else if (mode == 1)
+		return;
+
+	/* done */
+	if (mode == 2) {
+		/* stream endpoints often resubmit/unlink in completion */
+		done(ep, req, 0);
+
+		/* maybe advance queue to next request */
+		if (ep->num == 0) {
+			/* NOTE:  net2280 could let gadget driver start the
+			 * status stage later. since not all controllers let
+			 * them control that, the api doesn't (yet) allow it.
+			 */
+			if (!ep->stopped)
+				allow_status(ep);
+			req = NULL;
+		} else {
+			if (!list_empty(&ep->queue) && !ep->stopped)
+				req = list_entry(ep->queue.next,
+					struct net2280_request, queue);
+			else
+				req = NULL;
+			if (req && !ep->is_in)
+				stop_out_naking(ep);
+		}
+	}
+
+	/* is there a buffer for the next packet?
+	 * for best streaming performance, make sure there is one.
+	 */
+	if (req && !ep->stopped) {
+
+		/* load IN fifo with next packet (may be zlp) */
+		if (t & BIT(DATA_PACKET_TRANSMITTED_INTERRUPT))
+			write_fifo(ep, &req->req);
+	}
+}
+
+static struct net2280_ep *get_ep_by_addr(struct net2280 *dev, u16 wIndex)
+{
+	struct net2280_ep	*ep;
+
+	if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
+		return &dev->ep[0];
+	list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
+		u8	bEndpointAddress;
+
+		if (!ep->desc)
+			continue;
+		bEndpointAddress = ep->desc->bEndpointAddress;
+		if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
+			continue;
+		if ((wIndex & 0x0f) == (bEndpointAddress & 0x0f))
+			return ep;
+	}
+	return NULL;
+}
+
+static void defect7374_workaround(struct net2280 *dev, struct usb_ctrlrequest r)
+{
+	u32 scratch, fsmvalue;
+	u32 ack_wait_timeout, state;
+
+	/* Workaround for Defect 7374 (U1/U2 erroneously rejected): */
+	scratch = get_idx_reg(dev->regs, SCRATCH);
+	fsmvalue = scratch & (0xf << DEFECT7374_FSM_FIELD);
+	scratch &= ~(0xf << DEFECT7374_FSM_FIELD);
+
+	if (!((fsmvalue == DEFECT7374_FSM_WAITING_FOR_CONTROL_READ) &&
+				(r.bRequestType & USB_DIR_IN)))
+		return;
+
+	/* This is the first Control Read for this connection: */
+	if (!(readl(&dev->usb->usbstat) & BIT(SUPER_SPEED_MODE))) {
+		/*
+		 * Connection is NOT SS:
+		 * - Connection must be FS or HS.
+		 * - This FSM state should allow workaround software to
+		 * run after the next USB connection.
+		 */
+		scratch |= DEFECT7374_FSM_NON_SS_CONTROL_READ;
+		dev->bug7734_patched = 1;
+		goto restore_data_eps;
+	}
+
+	/* Connection is SS: */
+	for (ack_wait_timeout = 0;
+			ack_wait_timeout < DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS;
+			ack_wait_timeout++) {
+
+		state =	readl(&dev->plregs->pl_ep_status_1)
+			& (0xff << STATE);
+		if ((state >= (ACK_GOOD_NORMAL << STATE)) &&
+			(state <= (ACK_GOOD_MORE_ACKS_TO_COME << STATE))) {
+			scratch |= DEFECT7374_FSM_SS_CONTROL_READ;
+			dev->bug7734_patched = 1;
+			break;
+		}
+
+		/*
+		 * We have not yet received host's Data Phase ACK
+		 * - Wait and try again.
+		 */
+		udelay(DEFECT_7374_PROCESSOR_WAIT_TIME);
+	}
+
+
+	if (ack_wait_timeout >= DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS) {
+		ep_err(dev, "FAIL: Defect 7374 workaround waited but failed "
+		"to detect SS host's data phase ACK.");
+		ep_err(dev, "PL_EP_STATUS_1(23:16):.Expected from 0x11 to 0x16"
+		"got 0x%2.2x.\n", state >> STATE);
+	} else {
+		ep_warn(dev, "INFO: Defect 7374 workaround waited about\n"
+		"%duSec for Control Read Data Phase ACK\n",
+			DEFECT_7374_PROCESSOR_WAIT_TIME * ack_wait_timeout);
+	}
+
+restore_data_eps:
+	/*
+	 * Restore data EPs to their pre-workaround settings (disabled,
+	 * initialized, and other details).
+	 */
+	defect7374_disable_data_eps(dev);
+
+	set_idx_reg(dev->regs, SCRATCH, scratch);
+
+	return;
+}
+
+static void ep_clear_seqnum(struct net2280_ep *ep)
+{
+	struct net2280 *dev = ep->dev;
+	u32 val;
+	static const u32 ep_pl[9] = { 0, 3, 4, 7, 8, 2, 5, 6, 9 };
+
+	val = readl(&dev->plregs->pl_ep_ctrl) & ~0x1f;
+	val |= ep_pl[ep->num];
+	writel(val, &dev->plregs->pl_ep_ctrl);
+	val |= BIT(SEQUENCE_NUMBER_RESET);
+	writel(val, &dev->plregs->pl_ep_ctrl);
+
+	return;
+}
+
+static void handle_stat0_irqs_superspeed(struct net2280 *dev,
+		struct net2280_ep *ep, struct usb_ctrlrequest r)
+{
+	struct net2280_ep *e;
+	u16 status;
+	int tmp = 0;
+
+#define	w_value		le16_to_cpu(r.wValue)
+#define	w_index		le16_to_cpu(r.wIndex)
+#define	w_length	le16_to_cpu(r.wLength)
+
+	switch (r.bRequest) {
+	case USB_REQ_SET_CONFIGURATION:
+		dev->addressed_state = !w_value;
+		goto usb3_delegate;
+
+	case USB_REQ_GET_STATUS:
+		switch (r.bRequestType) {
+		case (USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE):
+			status = dev->wakeup_enable ? 0x02 : 0x00;
+			if (dev->gadget.is_selfpowered)
+				status |= BIT(0);
+			status |= (dev->u1_enable << 2 | dev->u2_enable << 3 |
+							dev->ltm_enable << 4);
+			writel(0, &dev->epregs[0].ep_irqenb);
+			set_fifo_bytecount(ep, sizeof(status));
+			writel((__force u32) status, &dev->epregs[0].ep_data);
+			allow_status_338x(ep);
+			break;
+
+		case (USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_ENDPOINT):
+			e = get_ep_by_addr(dev, w_index);
+			if (!e)
+				goto do_stall3;
+			status = readl(&e->regs->ep_rsp) &
+						BIT(CLEAR_ENDPOINT_HALT);
+			writel(0, &dev->epregs[0].ep_irqenb);
+			set_fifo_bytecount(ep, sizeof(status));
+			writel((__force u32) status, &dev->epregs[0].ep_data);
+			allow_status_338x(ep);
+			break;
+
+		default:
+			goto usb3_delegate;
+		}
+		break;
+
+	case USB_REQ_CLEAR_FEATURE:
+		switch (r.bRequestType) {
+		case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE):
+			if (!dev->addressed_state) {
+				switch (w_value) {
+				case USB_DEVICE_U1_ENABLE:
+					dev->u1_enable = 0;
+					writel(readl(&dev->usb_ext->usbctl2) &
+						~BIT(U1_ENABLE),
+						&dev->usb_ext->usbctl2);
+					allow_status_338x(ep);
+					goto next_endpoints3;
+
+				case USB_DEVICE_U2_ENABLE:
+					dev->u2_enable = 0;
+					writel(readl(&dev->usb_ext->usbctl2) &
+						~BIT(U2_ENABLE),
+						&dev->usb_ext->usbctl2);
+					allow_status_338x(ep);
+					goto next_endpoints3;
+
+				case USB_DEVICE_LTM_ENABLE:
+					dev->ltm_enable = 0;
+					writel(readl(&dev->usb_ext->usbctl2) &
+						~BIT(LTM_ENABLE),
+						&dev->usb_ext->usbctl2);
+					allow_status_338x(ep);
+					goto next_endpoints3;
+
+				default:
+					break;
+				}
+			}
+			if (w_value == USB_DEVICE_REMOTE_WAKEUP) {
+				dev->wakeup_enable = 0;
+				writel(readl(&dev->usb->usbctl) &
+					~BIT(DEVICE_REMOTE_WAKEUP_ENABLE),
+					&dev->usb->usbctl);
+				allow_status_338x(ep);
+				break;
+			}
+			goto usb3_delegate;
+
+		case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_ENDPOINT):
+			e = get_ep_by_addr(dev,	w_index);
+			if (!e)
+				goto do_stall3;
+			if (w_value != USB_ENDPOINT_HALT)
+				goto do_stall3;
+			ep_vdbg(dev, "%s clear halt\n", e->ep.name);
+			/*
+			 * Workaround for SS SeqNum not cleared via
+			 * Endpoint Halt (Clear) bit. select endpoint
+			 */
+			ep_clear_seqnum(e);
+			clear_halt(e);
+			if (!list_empty(&e->queue) && e->td_dma)
+				restart_dma(e);
+			allow_status(ep);
+			ep->stopped = 1;
+			break;
+
+		default:
+			goto usb3_delegate;
+		}
+		break;
+	case USB_REQ_SET_FEATURE:
+		switch (r.bRequestType) {
+		case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE):
+			if (!dev->addressed_state) {
+				switch (w_value) {
+				case USB_DEVICE_U1_ENABLE:
+					dev->u1_enable = 1;
+					writel(readl(&dev->usb_ext->usbctl2) |
+						BIT(U1_ENABLE),
+						&dev->usb_ext->usbctl2);
+					allow_status_338x(ep);
+					goto next_endpoints3;
+
+				case USB_DEVICE_U2_ENABLE:
+					dev->u2_enable = 1;
+					writel(readl(&dev->usb_ext->usbctl2) |
+						BIT(U2_ENABLE),
+						&dev->usb_ext->usbctl2);
+					allow_status_338x(ep);
+					goto next_endpoints3;
+
+				case USB_DEVICE_LTM_ENABLE:
+					dev->ltm_enable = 1;
+					writel(readl(&dev->usb_ext->usbctl2) |
+						BIT(LTM_ENABLE),
+						&dev->usb_ext->usbctl2);
+					allow_status_338x(ep);
+					goto next_endpoints3;
+				default:
+					break;
+				}
+			}
+
+			if (w_value == USB_DEVICE_REMOTE_WAKEUP) {
+				dev->wakeup_enable = 1;
+				writel(readl(&dev->usb->usbctl) |
+					BIT(DEVICE_REMOTE_WAKEUP_ENABLE),
+					&dev->usb->usbctl);
+				allow_status_338x(ep);
+				break;
+			}
+			goto usb3_delegate;
+
+		case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_ENDPOINT):
+			e = get_ep_by_addr(dev,	w_index);
+			if (!e || (w_value != USB_ENDPOINT_HALT))
+				goto do_stall3;
+			ep->stopped = 1;
+			if (ep->num == 0)
+				ep->dev->protocol_stall = 1;
+			else {
+				if (ep->dma)
+					abort_dma(ep);
+				set_halt(ep);
+			}
+			allow_status_338x(ep);
+			break;
+
+		default:
+			goto usb3_delegate;
+		}
+
+		break;
+	default:
+
+usb3_delegate:
+		ep_vdbg(dev, "setup %02x.%02x v%04x i%04x l%04x ep_cfg %08x\n",
+				r.bRequestType, r.bRequest,
+				w_value, w_index, w_length,
+				readl(&ep->cfg->ep_cfg));
+
+		ep->responded = 0;
+		if (dev->async_callbacks) {
+			spin_unlock(&dev->lock);
+			tmp = dev->driver->setup(&dev->gadget, &r);
+			spin_lock(&dev->lock);
+		}
+	}
+do_stall3:
+	if (tmp < 0) {
+		ep_vdbg(dev, "req %02x.%02x protocol STALL; stat %d\n",
+				r.bRequestType, r.bRequest, tmp);
+		dev->protocol_stall = 1;
+		/* TD 9.9 Halt Endpoint test. TD 9.22 Set feature test */
+		set_halt(ep);
+	}
+
+next_endpoints3:
+
+#undef	w_value
+#undef	w_index
+#undef	w_length
+
+	return;
+}
+
+static void usb338x_handle_ep_intr(struct net2280 *dev, u32 stat0)
+{
+	u32 index;
+	u32 bit;
+
+	for (index = 0; index < ARRAY_SIZE(ep_bit); index++) {
+		bit = BIT(ep_bit[index]);
+
+		if (!stat0)
+			break;
+
+		if (!(stat0 & bit))
+			continue;
+
+		stat0 &= ~bit;
+
+		handle_ep_small(&dev->ep[index]);
+	}
+}
+
+static void handle_stat0_irqs(struct net2280 *dev, u32 stat)
+{
+	struct net2280_ep	*ep;
+	u32			num, scratch;
+
+	/* most of these don't need individual acks */
+	stat &= ~BIT(INTA_ASSERTED);
+	if (!stat)
+		return;
+	/* ep_dbg(dev, "irqstat0 %04x\n", stat); */
+
+	/* starting a control request? */
+	if (unlikely(stat & BIT(SETUP_PACKET_INTERRUPT))) {
+		union {
+			u32			raw[2];
+			struct usb_ctrlrequest	r;
+		} u;
+		int				tmp;
+		struct net2280_request		*req;
+
+		if (dev->gadget.speed == USB_SPEED_UNKNOWN) {
+			u32 val = readl(&dev->usb->usbstat);
+			if (val & BIT(SUPER_SPEED)) {
+				dev->gadget.speed = USB_SPEED_SUPER;
+				usb_ep_set_maxpacket_limit(&dev->ep[0].ep,
+						EP0_SS_MAX_PACKET_SIZE);
+			} else if (val & BIT(HIGH_SPEED)) {
+				dev->gadget.speed = USB_SPEED_HIGH;
+				usb_ep_set_maxpacket_limit(&dev->ep[0].ep,
+						EP0_HS_MAX_PACKET_SIZE);
+			} else {
+				dev->gadget.speed = USB_SPEED_FULL;
+				usb_ep_set_maxpacket_limit(&dev->ep[0].ep,
+						EP0_HS_MAX_PACKET_SIZE);
+			}
+			net2280_led_speed(dev, dev->gadget.speed);
+			ep_dbg(dev, "%s\n",
+					usb_speed_string(dev->gadget.speed));
+		}
+
+		ep = &dev->ep[0];
+		ep->irqs++;
+
+		/* make sure any leftover request state is cleared */
+		stat &= ~BIT(ENDPOINT_0_INTERRUPT);
+		while (!list_empty(&ep->queue)) {
+			req = list_entry(ep->queue.next,
+					struct net2280_request, queue);
+			done(ep, req, (req->req.actual == req->req.length)
+						? 0 : -EPROTO);
+		}
+		ep->stopped = 0;
+		dev->protocol_stall = 0;
+		if (!(dev->quirks & PLX_PCIE)) {
+			if (ep->dev->quirks & PLX_2280)
+				tmp = BIT(FIFO_OVERFLOW) |
+				    BIT(FIFO_UNDERFLOW);
+			else
+				tmp = 0;
+
+			writel(tmp | BIT(TIMEOUT) |
+				   BIT(USB_STALL_SENT) |
+				   BIT(USB_IN_NAK_SENT) |
+				   BIT(USB_IN_ACK_RCVD) |
+				   BIT(USB_OUT_PING_NAK_SENT) |
+				   BIT(USB_OUT_ACK_SENT) |
+				   BIT(SHORT_PACKET_OUT_DONE_INTERRUPT) |
+				   BIT(SHORT_PACKET_TRANSFERRED_INTERRUPT) |
+				   BIT(DATA_PACKET_RECEIVED_INTERRUPT) |
+				   BIT(DATA_PACKET_TRANSMITTED_INTERRUPT) |
+				   BIT(DATA_OUT_PING_TOKEN_INTERRUPT) |
+				   BIT(DATA_IN_TOKEN_INTERRUPT),
+				   &ep->regs->ep_stat);
+		}
+		u.raw[0] = readl(&dev->usb->setup0123);
+		u.raw[1] = readl(&dev->usb->setup4567);
+
+		cpu_to_le32s(&u.raw[0]);
+		cpu_to_le32s(&u.raw[1]);
+
+		if ((dev->quirks & PLX_PCIE) && !dev->bug7734_patched)
+			defect7374_workaround(dev, u.r);
+
+		tmp = 0;
+
+#define	w_value		le16_to_cpu(u.r.wValue)
+#define	w_index		le16_to_cpu(u.r.wIndex)
+#define	w_length	le16_to_cpu(u.r.wLength)
+
+		/* ack the irq */
+		writel(BIT(SETUP_PACKET_INTERRUPT), &dev->regs->irqstat0);
+		stat ^= BIT(SETUP_PACKET_INTERRUPT);
+
+		/* watch control traffic at the token level, and force
+		 * synchronization before letting the status stage happen.
+		 * FIXME ignore tokens we'll NAK, until driver responds.
+		 * that'll mean a lot less irqs for some drivers.
+		 */
+		ep->is_in = (u.r.bRequestType & USB_DIR_IN) != 0;
+		if (ep->is_in) {
+			scratch = BIT(DATA_PACKET_TRANSMITTED_INTERRUPT) |
+				BIT(DATA_OUT_PING_TOKEN_INTERRUPT) |
+				BIT(DATA_IN_TOKEN_INTERRUPT);
+			stop_out_naking(ep);
+		} else
+			scratch = BIT(DATA_PACKET_RECEIVED_INTERRUPT) |
+				BIT(DATA_OUT_PING_TOKEN_INTERRUPT) |
+				BIT(DATA_IN_TOKEN_INTERRUPT);
+		writel(scratch, &dev->epregs[0].ep_irqenb);
+
+		/* we made the hardware handle most lowlevel requests;
+		 * everything else goes uplevel to the gadget code.
+		 */
+		ep->responded = 1;
+
+		if (dev->gadget.speed == USB_SPEED_SUPER) {
+			handle_stat0_irqs_superspeed(dev, ep, u.r);
+			goto next_endpoints;
+		}
+
+		switch (u.r.bRequest) {
+		case USB_REQ_GET_STATUS: {
+			struct net2280_ep	*e;
+			__le32			status;
+
+			/* hw handles device and interface status */
+			if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT))
+				goto delegate;
+			e = get_ep_by_addr(dev, w_index);
+			if (!e || w_length > 2)
+				goto do_stall;
+
+			if (readl(&e->regs->ep_rsp) & BIT(SET_ENDPOINT_HALT))
+				status = cpu_to_le32(1);
+			else
+				status = cpu_to_le32(0);
+
+			/* don't bother with a request object! */
+			writel(0, &dev->epregs[0].ep_irqenb);
+			set_fifo_bytecount(ep, w_length);
+			writel((__force u32)status, &dev->epregs[0].ep_data);
+			allow_status(ep);
+			ep_vdbg(dev, "%s stat %02x\n", ep->ep.name, status);
+			goto next_endpoints;
+			}
+			break;
+		case USB_REQ_CLEAR_FEATURE: {
+			struct net2280_ep	*e;
+
+			/* hw handles device features */
+			if (u.r.bRequestType != USB_RECIP_ENDPOINT)
+				goto delegate;
+			if (w_value != USB_ENDPOINT_HALT || w_length != 0)
+				goto do_stall;
+			e = get_ep_by_addr(dev, w_index);
+			if (!e)
+				goto do_stall;
+			if (e->wedged) {
+				ep_vdbg(dev, "%s wedged, halt not cleared\n",
+						ep->ep.name);
+			} else {
+				ep_vdbg(dev, "%s clear halt\n", e->ep.name);
+				clear_halt(e);
+				if ((ep->dev->quirks & PLX_PCIE) &&
+					!list_empty(&e->queue) && e->td_dma)
+						restart_dma(e);
+			}
+			allow_status(ep);
+			goto next_endpoints;
+			}
+			break;
+		case USB_REQ_SET_FEATURE: {
+			struct net2280_ep	*e;
+
+			/* hw handles device features */
+			if (u.r.bRequestType != USB_RECIP_ENDPOINT)
+				goto delegate;
+			if (w_value != USB_ENDPOINT_HALT || w_length != 0)
+				goto do_stall;
+			e = get_ep_by_addr(dev, w_index);
+			if (!e)
+				goto do_stall;
+			if (e->ep.name == ep0name)
+				goto do_stall;
+			set_halt(e);
+			if ((dev->quirks & PLX_PCIE) && e->dma)
+				abort_dma(e);
+			allow_status(ep);
+			ep_vdbg(dev, "%s set halt\n", ep->ep.name);
+			goto next_endpoints;
+			}
+			break;
+		default:
+delegate:
+			ep_vdbg(dev, "setup %02x.%02x v%04x i%04x l%04x "
+				"ep_cfg %08x\n",
+				u.r.bRequestType, u.r.bRequest,
+				w_value, w_index, w_length,
+				readl(&ep->cfg->ep_cfg));
+			ep->responded = 0;
+			if (dev->async_callbacks) {
+				spin_unlock(&dev->lock);
+				tmp = dev->driver->setup(&dev->gadget, &u.r);
+				spin_lock(&dev->lock);
+			}
+		}
+
+		/* stall ep0 on error */
+		if (tmp < 0) {
+do_stall:
+			ep_vdbg(dev, "req %02x.%02x protocol STALL; stat %d\n",
+					u.r.bRequestType, u.r.bRequest, tmp);
+			dev->protocol_stall = 1;
+		}
+
+		/* some in/out token irq should follow; maybe stall then.
+		 * driver must queue a request (even zlp) or halt ep0
+		 * before the host times out.
+		 */
+	}
+
+#undef	w_value
+#undef	w_index
+#undef	w_length
+
+next_endpoints:
+	if ((dev->quirks & PLX_PCIE) && dev->enhanced_mode) {
+		u32 mask = (BIT(ENDPOINT_0_INTERRUPT) |
+			USB3380_IRQSTAT0_EP_INTR_MASK_IN |
+			USB3380_IRQSTAT0_EP_INTR_MASK_OUT);
+
+		if (stat & mask) {
+			usb338x_handle_ep_intr(dev, stat & mask);
+			stat &= ~mask;
+		}
+	} else {
+		/* endpoint data irq ? */
+		scratch = stat & 0x7f;
+		stat &= ~0x7f;
+		for (num = 0; scratch; num++) {
+			u32		t;
+
+			/* do this endpoint's FIFO and queue need tending? */
+			t = BIT(num);
+			if ((scratch & t) == 0)
+				continue;
+			scratch ^= t;
+
+			ep = &dev->ep[num];
+			handle_ep_small(ep);
+		}
+	}
+
+	if (stat)
+		ep_dbg(dev, "unhandled irqstat0 %08x\n", stat);
+}
+
+#define DMA_INTERRUPTS (BIT(DMA_D_INTERRUPT) | \
+		BIT(DMA_C_INTERRUPT) | \
+		BIT(DMA_B_INTERRUPT) | \
+		BIT(DMA_A_INTERRUPT))
+#define	PCI_ERROR_INTERRUPTS ( \
+		BIT(PCI_MASTER_ABORT_RECEIVED_INTERRUPT) | \
+		BIT(PCI_TARGET_ABORT_RECEIVED_INTERRUPT) | \
+		BIT(PCI_RETRY_ABORT_INTERRUPT))
+
+static void handle_stat1_irqs(struct net2280 *dev, u32 stat)
+__releases(dev->lock)
+__acquires(dev->lock)
+{
+	struct net2280_ep	*ep;
+	u32			tmp, num, mask, scratch;
+
+	/* after disconnect there's nothing else to do! */
+	tmp = BIT(VBUS_INTERRUPT) | BIT(ROOT_PORT_RESET_INTERRUPT);
+	mask = BIT(SUPER_SPEED) | BIT(HIGH_SPEED) | BIT(FULL_SPEED);
+
+	/* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set.
+	 * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRUPT set and
+	 * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT
+	 * only indicates a change in the reset state).
+	 */
+	if (stat & tmp) {
+		bool	reset = false;
+		bool	disconnect = false;
+
+		/*
+		 * Ignore disconnects and resets if the speed hasn't been set.
+		 * VBUS can bounce and there's always an initial reset.
+		 */
+		writel(tmp, &dev->regs->irqstat1);
+		if (dev->gadget.speed != USB_SPEED_UNKNOWN) {
+			if ((stat & BIT(VBUS_INTERRUPT)) &&
+					(readl(&dev->usb->usbctl) &
+						BIT(VBUS_PIN)) == 0) {
+				disconnect = true;
+				ep_dbg(dev, "disconnect %s\n",
+						dev->driver->driver.name);
+			} else if ((stat & BIT(ROOT_PORT_RESET_INTERRUPT)) &&
+					(readl(&dev->usb->usbstat) & mask)
+						== 0) {
+				reset = true;
+				ep_dbg(dev, "reset %s\n",
+						dev->driver->driver.name);
+			}
+
+			if (disconnect || reset) {
+				stop_activity(dev, dev->driver);
+				ep0_start(dev);
+				if (dev->async_callbacks) {
+					spin_unlock(&dev->lock);
+					if (reset)
+						usb_gadget_udc_reset(&dev->gadget, dev->driver);
+					else
+						(dev->driver->disconnect)(&dev->gadget);
+					spin_lock(&dev->lock);
+				}
+				return;
+			}
+		}
+		stat &= ~tmp;
+
+		/* vBUS can bounce ... one of many reasons to ignore the
+		 * notion of hotplug events on bus connect/disconnect!
+		 */
+		if (!stat)
+			return;
+	}
+
+	/* NOTE: chip stays in PCI D0 state for now, but it could
+	 * enter D1 to save more power
+	 */
+	tmp = BIT(SUSPEND_REQUEST_CHANGE_INTERRUPT);
+	if (stat & tmp) {
+		writel(tmp, &dev->regs->irqstat1);
+		spin_unlock(&dev->lock);
+		if (stat & BIT(SUSPEND_REQUEST_INTERRUPT)) {
+			if (dev->async_callbacks && dev->driver->suspend)
+				dev->driver->suspend(&dev->gadget);
+			if (!enable_suspend)
+				stat &= ~BIT(SUSPEND_REQUEST_INTERRUPT);
+		} else {
+			if (dev->async_callbacks && dev->driver->resume)
+				dev->driver->resume(&dev->gadget);
+			/* at high speed, note erratum 0133 */
+		}
+		spin_lock(&dev->lock);
+		stat &= ~tmp;
+	}
+
+	/* clear any other status/irqs */
+	if (stat)
+		writel(stat, &dev->regs->irqstat1);
+
+	/* some status we can just ignore */
+	if (dev->quirks & PLX_2280)
+		stat &= ~(BIT(CONTROL_STATUS_INTERRUPT) |
+			  BIT(SUSPEND_REQUEST_INTERRUPT) |
+			  BIT(RESUME_INTERRUPT) |
+			  BIT(SOF_INTERRUPT));
+	else
+		stat &= ~(BIT(CONTROL_STATUS_INTERRUPT) |
+			  BIT(RESUME_INTERRUPT) |
+			  BIT(SOF_DOWN_INTERRUPT) |
+			  BIT(SOF_INTERRUPT));
+
+	if (!stat)
+		return;
+	/* ep_dbg(dev, "irqstat1 %08x\n", stat);*/
+
+	/* DMA status, for ep-{a,b,c,d} */
+	scratch = stat & DMA_INTERRUPTS;
+	stat &= ~DMA_INTERRUPTS;
+	scratch >>= 9;
+	for (num = 0; scratch; num++) {
+		struct net2280_dma_regs	__iomem *dma;
+
+		tmp = BIT(num);
+		if ((tmp & scratch) == 0)
+			continue;
+		scratch ^= tmp;
+
+		ep = &dev->ep[num + 1];
+		dma = ep->dma;
+
+		if (!dma)
+			continue;
+
+		/* clear ep's dma status */
+		tmp = readl(&dma->dmastat);
+		writel(tmp, &dma->dmastat);
+
+		/* dma sync*/
+		if (dev->quirks & PLX_PCIE) {
+			u32 r_dmacount = readl(&dma->dmacount);
+			if (!ep->is_in &&  (r_dmacount & 0x00FFFFFF) &&
+			    (tmp & BIT(DMA_TRANSACTION_DONE_INTERRUPT)))
+				continue;
+		}
+
+		if (!(tmp & BIT(DMA_TRANSACTION_DONE_INTERRUPT))) {
+			ep_dbg(ep->dev, "%s no xact done? %08x\n",
+				ep->ep.name, tmp);
+			continue;
+		}
+		stop_dma(ep->dma);
+
+		/* OUT transfers terminate when the data from the
+		 * host is in our memory.  Process whatever's done.
+		 * On this path, we know transfer's last packet wasn't
+		 * less than req->length. NAK_OUT_PACKETS may be set,
+		 * or the FIFO may already be holding new packets.
+		 *
+		 * IN transfers can linger in the FIFO for a very
+		 * long time ... we ignore that for now, accounting
+		 * precisely (like PIO does) needs per-packet irqs
+		 */
+		scan_dma_completions(ep);
+
+		/* disable dma on inactive queues; else maybe restart */
+		if (!list_empty(&ep->queue)) {
+			tmp = readl(&dma->dmactl);
+			restart_dma(ep);
+		}
+		ep->irqs++;
+	}
+
+	/* NOTE:  there are other PCI errors we might usefully notice.
+	 * if they appear very often, here's where to try recovering.
+	 */
+	if (stat & PCI_ERROR_INTERRUPTS) {
+		ep_err(dev, "pci dma error; stat %08x\n", stat);
+		stat &= ~PCI_ERROR_INTERRUPTS;
+		/* these are fatal errors, but "maybe" they won't
+		 * happen again ...
+		 */
+		stop_activity(dev, dev->driver);
+		ep0_start(dev);
+		stat = 0;
+	}
+
+	if (stat)
+		ep_dbg(dev, "unhandled irqstat1 %08x\n", stat);
+}
+
+static irqreturn_t net2280_irq(int irq, void *_dev)
+{
+	struct net2280		*dev = _dev;
+
+	/* shared interrupt, not ours */
+	if ((dev->quirks & PLX_LEGACY) &&
+		(!(readl(&dev->regs->irqstat0) & BIT(INTA_ASSERTED))))
+		return IRQ_NONE;
+
+	spin_lock(&dev->lock);
+
+	/* handle disconnect, dma, and more */
+	handle_stat1_irqs(dev, readl(&dev->regs->irqstat1));
+
+	/* control requests and PIO */
+	handle_stat0_irqs(dev, readl(&dev->regs->irqstat0));
+
+	if (dev->quirks & PLX_PCIE) {
+		/* re-enable interrupt to trigger any possible new interrupt */
+		u32 pciirqenb1 = readl(&dev->regs->pciirqenb1);
+		writel(pciirqenb1 & 0x7FFFFFFF, &dev->regs->pciirqenb1);
+		writel(pciirqenb1, &dev->regs->pciirqenb1);
+	}
+
+	spin_unlock(&dev->lock);
+
+	return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void gadget_release(struct device *_dev)
+{
+	struct net2280	*dev = container_of(_dev, struct net2280, gadget.dev);
+
+	kfree(dev);
+}
+
+/* tear down the binding between this driver and the pci device */
+
+static void net2280_remove(struct pci_dev *pdev)
+{
+	struct net2280		*dev = pci_get_drvdata(pdev);
+
+	if (dev->added)
+		usb_del_gadget(&dev->gadget);
+
+	BUG_ON(dev->driver);
+
+	/* then clean up the resources we allocated during probe() */
+	if (dev->requests) {
+		int		i;
+		for (i = 1; i < 5; i++) {
+			if (!dev->ep[i].dummy)
+				continue;
+			dma_pool_free(dev->requests, dev->ep[i].dummy,
+					dev->ep[i].td_dma);
+		}
+		dma_pool_destroy(dev->requests);
+	}
+	if (dev->got_irq)
+		free_irq(pdev->irq, dev);
+	if (dev->quirks & PLX_PCIE)
+		pci_disable_msi(pdev);
+	if (dev->regs) {
+		net2280_led_shutdown(dev);
+		iounmap(dev->regs);
+	}
+	if (dev->region)
+		release_mem_region(pci_resource_start(pdev, 0),
+				pci_resource_len(pdev, 0));
+	if (dev->enabled)
+		pci_disable_device(pdev);
+	device_remove_file(&pdev->dev, &dev_attr_registers);
+
+	ep_info(dev, "unbind\n");
+	usb_put_gadget(&dev->gadget);
+}
+
+/* wrap this driver around the specified device, but
+ * don't respond over USB until a gadget driver binds to us.
+ */
+
+static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct net2280		*dev;
+	unsigned long		resource, len;
+	void			__iomem *base = NULL;
+	int			retval, i;
+
+	/* alloc, and start init */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL) {
+		retval = -ENOMEM;
+		goto done;
+	}
+
+	pci_set_drvdata(pdev, dev);
+	usb_initialize_gadget(&pdev->dev, &dev->gadget, gadget_release);
+	spin_lock_init(&dev->lock);
+	dev->quirks = id->driver_data;
+	dev->pdev = pdev;
+	dev->gadget.ops = &net2280_ops;
+	dev->gadget.max_speed = (dev->quirks & PLX_SUPERSPEED) ?
+				USB_SPEED_SUPER : USB_SPEED_HIGH;
+
+	/* the "gadget" abstracts/virtualizes the controller */
+	dev->gadget.name = driver_name;
+
+	/* now all the pci goodies ... */
+	if (pci_enable_device(pdev) < 0) {
+		retval = -ENODEV;
+		goto done;
+	}
+	dev->enabled = 1;
+
+	/* BAR 0 holds all the registers
+	 * BAR 1 is 8051 memory; unused here (note erratum 0103)
+	 * BAR 2 is fifo memory; unused here
+	 */
+	resource = pci_resource_start(pdev, 0);
+	len = pci_resource_len(pdev, 0);
+	if (!request_mem_region(resource, len, driver_name)) {
+		ep_dbg(dev, "controller already in use\n");
+		retval = -EBUSY;
+		goto done;
+	}
+	dev->region = 1;
+
+	/* FIXME provide firmware download interface to put
+	 * 8051 code into the chip, e.g. to turn on PCI PM.
+	 */
+
+	base = ioremap(resource, len);
+	if (base == NULL) {
+		ep_dbg(dev, "can't map memory\n");
+		retval = -EFAULT;
+		goto done;
+	}
+	dev->regs = (struct net2280_regs __iomem *) base;
+	dev->usb = (struct net2280_usb_regs __iomem *) (base + 0x0080);
+	dev->pci = (struct net2280_pci_regs __iomem *) (base + 0x0100);
+	dev->dma = (struct net2280_dma_regs __iomem *) (base + 0x0180);
+	dev->dep = (struct net2280_dep_regs __iomem *) (base + 0x0200);
+	dev->epregs = (struct net2280_ep_regs __iomem *) (base + 0x0300);
+
+	if (dev->quirks & PLX_PCIE) {
+		u32 fsmvalue;
+		u32 usbstat;
+		dev->usb_ext = (struct usb338x_usb_ext_regs __iomem *)
+							(base + 0x00b4);
+		dev->llregs = (struct usb338x_ll_regs __iomem *)
+							(base + 0x0700);
+		dev->plregs = (struct usb338x_pl_regs __iomem *)
+							(base + 0x0800);
+		usbstat = readl(&dev->usb->usbstat);
+		dev->enhanced_mode = !!(usbstat & BIT(11));
+		dev->n_ep = (dev->enhanced_mode) ? 9 : 5;
+		/* put into initial config, link up all endpoints */
+		fsmvalue = get_idx_reg(dev->regs, SCRATCH) &
+					(0xf << DEFECT7374_FSM_FIELD);
+		/* See if firmware needs to set up for workaround: */
+		if (fsmvalue == DEFECT7374_FSM_SS_CONTROL_READ) {
+			dev->bug7734_patched = 1;
+			writel(0, &dev->usb->usbctl);
+		} else
+			dev->bug7734_patched = 0;
+	} else {
+		dev->enhanced_mode = 0;
+		dev->n_ep = 7;
+		/* put into initial config, link up all endpoints */
+		writel(0, &dev->usb->usbctl);
+	}
+
+	usb_reset(dev);
+	usb_reinit(dev);
+
+	/* irq setup after old hardware is cleaned up */
+	if (!pdev->irq) {
+		ep_err(dev, "No IRQ.  Check PCI setup!\n");
+		retval = -ENODEV;
+		goto done;
+	}
+
+	if (dev->quirks & PLX_PCIE)
+		if (pci_enable_msi(pdev))
+			ep_err(dev, "Failed to enable MSI mode\n");
+
+	if (request_irq(pdev->irq, net2280_irq, IRQF_SHARED,
+							driver_name, dev)) {
+		ep_err(dev, "request interrupt %d failed\n", pdev->irq);
+		retval = -EBUSY;
+		goto done;
+	}
+	dev->got_irq = 1;
+
+	/* DMA setup */
+	/* NOTE:  we know only the 32 LSBs of dma addresses may be nonzero */
+	dev->requests = dma_pool_create("requests", &pdev->dev,
+		sizeof(struct net2280_dma),
+		0 /* no alignment requirements */,
+		0 /* or page-crossing issues */);
+	if (!dev->requests) {
+		ep_dbg(dev, "can't get request pool\n");
+		retval = -ENOMEM;
+		goto done;
+	}
+	for (i = 1; i < 5; i++) {
+		struct net2280_dma	*td;
+
+		td = dma_pool_alloc(dev->requests, GFP_KERNEL,
+				&dev->ep[i].td_dma);
+		if (!td) {
+			ep_dbg(dev, "can't get dummy %d\n", i);
+			retval = -ENOMEM;
+			goto done;
+		}
+		td->dmacount = 0;	/* not VALID */
+		td->dmadesc = td->dmaaddr;
+		dev->ep[i].dummy = td;
+	}
+
+	/* enable lower-overhead pci memory bursts during DMA */
+	if (dev->quirks & PLX_LEGACY)
+		writel(BIT(DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE) |
+			/*
+			 * 256 write retries may not be enough...
+			   BIT(PCI_RETRY_ABORT_ENABLE) |
+			*/
+			BIT(DMA_READ_MULTIPLE_ENABLE) |
+			BIT(DMA_READ_LINE_ENABLE),
+			&dev->pci->pcimstctl);
+	/* erratum 0115 shouldn't appear: Linux inits PCI_LATENCY_TIMER */
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
+	/* ... also flushes any posted pci writes */
+	dev->chiprev = get_idx_reg(dev->regs, REG_CHIPREV) & 0xffff;
+
+	/* done */
+	ep_info(dev, "%s\n", driver_desc);
+	ep_info(dev, "irq %d, pci mem %p, chip rev %04x\n",
+			pdev->irq, base, dev->chiprev);
+	ep_info(dev, "version: " DRIVER_VERSION "; %s\n",
+		dev->enhanced_mode ? "enhanced mode" : "legacy mode");
+	retval = device_create_file(&pdev->dev, &dev_attr_registers);
+	if (retval)
+		goto done;
+
+	retval = usb_add_gadget(&dev->gadget);
+	if (retval)
+		goto done;
+	dev->added = 1;
+	return 0;
+
+done:
+	if (dev) {
+		net2280_remove(pdev);
+		kfree(dev);
+	}
+	return retval;
+}
+
+/* make sure the board is quiescent; otherwise it will continue
+ * generating IRQs across the upcoming reboot.
+ */
+
+static void net2280_shutdown(struct pci_dev *pdev)
+{
+	struct net2280		*dev = pci_get_drvdata(pdev);
+
+	/* disable IRQs */
+	writel(0, &dev->regs->pciirqenb0);
+	writel(0, &dev->regs->pciirqenb1);
+
+	/* disable the pullup so the host will think we're gone */
+	writel(0, &dev->usb->usbctl);
+
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static const struct pci_device_id pci_ids[] = { {
+	.class =	PCI_CLASS_SERIAL_USB_DEVICE,
+	.class_mask =	~0,
+	.vendor =	PCI_VENDOR_ID_PLX_LEGACY,
+	.device =	0x2280,
+	.subvendor =	PCI_ANY_ID,
+	.subdevice =	PCI_ANY_ID,
+	.driver_data =	PLX_LEGACY | PLX_2280,
+	}, {
+	.class =	PCI_CLASS_SERIAL_USB_DEVICE,
+	.class_mask =	~0,
+	.vendor =	PCI_VENDOR_ID_PLX_LEGACY,
+	.device =	0x2282,
+	.subvendor =	PCI_ANY_ID,
+	.subdevice =	PCI_ANY_ID,
+	.driver_data =	PLX_LEGACY,
+	},
+	{
+	.class =	PCI_CLASS_SERIAL_USB_DEVICE,
+	.class_mask =	~0,
+	.vendor =	PCI_VENDOR_ID_PLX,
+	.device =	0x2380,
+	.subvendor =	PCI_ANY_ID,
+	.subdevice =	PCI_ANY_ID,
+	.driver_data =	PLX_PCIE,
+	 },
+	{
+	.class =	((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+	.class_mask =	~0,
+	.vendor =	PCI_VENDOR_ID_PLX,
+	.device =	0x3380,
+	.subvendor =	PCI_ANY_ID,
+	.subdevice =	PCI_ANY_ID,
+	.driver_data =	PLX_PCIE | PLX_SUPERSPEED,
+	 },
+	{
+	.class =	PCI_CLASS_SERIAL_USB_DEVICE,
+	.class_mask =	~0,
+	.vendor =	PCI_VENDOR_ID_PLX,
+	.device =	0x3382,
+	.subvendor =	PCI_ANY_ID,
+	.subdevice =	PCI_ANY_ID,
+	.driver_data =	PLX_PCIE | PLX_SUPERSPEED,
+	 },
+{ /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver net2280_pci_driver = {
+	.name =		driver_name,
+	.id_table =	pci_ids,
+
+	.probe =	net2280_probe,
+	.remove =	net2280_remove,
+	.shutdown =	net2280_shutdown,
+
+	/* FIXME add power management support */
+};
+
+module_pci_driver(net2280_pci_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h
new file mode 100644
index 000000000..34716a9f4
--- /dev/null
+++ b/drivers/usb/gadget/udc/net2280.h
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * NetChip 2280 high/full speed USB device controller.
+ * Unlike many such controllers, this one talks PCI.
+ */
+
+/*
+ * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
+ * Copyright (C) 2003 David Brownell
+ * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS
+ */
+
+#include <linux/usb/net2280.h>
+#include <linux/usb/usb338x.h>
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	__KERNEL__
+
+/* indexed registers [11.10] are accessed indirectly
+ * caller must own the device lock.
+ */
+
+static inline u32 get_idx_reg(struct net2280_regs __iomem *regs, u32 index)
+{
+	writel(index, &regs->idxaddr);
+	/* NOTE:  synchs device/cpu memory views */
+	return readl(&regs->idxdata);
+}
+
+static inline void
+set_idx_reg(struct net2280_regs __iomem *regs, u32 index, u32 value)
+{
+	writel(index, &regs->idxaddr);
+	writel(value, &regs->idxdata);
+	/* posted, may not be visible yet */
+}
+
+#endif	/* __KERNEL__ */
+
+#define PCI_VENDOR_ID_PLX_LEGACY 0x17cc
+
+#define PLX_LEGACY		BIT(0)
+#define PLX_2280		BIT(1)
+#define PLX_SUPERSPEED		BIT(2)
+#define PLX_PCIE		BIT(3)
+
+#define REG_DIAG		0x0
+#define     RETRY_COUNTER                                       16
+#define     FORCE_PCI_SERR                                      11
+#define     FORCE_PCI_INTERRUPT                                 10
+#define     FORCE_USB_INTERRUPT                                 9
+#define     FORCE_CPU_INTERRUPT                                 8
+#define     ILLEGAL_BYTE_ENABLES                                5
+#define     FAST_TIMES                                          4
+#define     FORCE_RECEIVE_ERROR                                 2
+#define     FORCE_TRANSMIT_CRC_ERROR                            0
+#define REG_FRAME		0x02	/* from last sof */
+#define REG_CHIPREV		0x03	/* in bcd */
+#define	REG_HS_NAK_RATE		0x0a	/* NAK per N uframes */
+
+#define	CHIPREV_1	0x0100
+#define	CHIPREV_1A	0x0110
+
+/* DEFECT 7374 */
+#define DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS         200
+#define DEFECT_7374_PROCESSOR_WAIT_TIME             10
+
+/* ep0 max packet size */
+#define EP0_SS_MAX_PACKET_SIZE  0x200
+#define EP0_HS_MAX_PACKET_SIZE  0x40
+#ifdef	__KERNEL__
+
+/*-------------------------------------------------------------------------*/
+
+/* [8.3] for scatter/gather i/o
+ * use struct net2280_dma_regs bitfields
+ */
+struct net2280_dma {
+	__le32		dmacount;
+	__le32		dmaaddr;		/* the buffer */
+	__le32		dmadesc;		/* next dma descriptor */
+	__le32		_reserved;
+} __aligned(16);
+
+/*-------------------------------------------------------------------------*/
+
+/* DRIVER DATA STRUCTURES and UTILITIES */
+
+struct net2280_ep {
+	struct usb_ep				ep;
+	struct net2280_ep_regs __iomem *cfg;
+	struct net2280_ep_regs			__iomem *regs;
+	struct net2280_dma_regs			__iomem *dma;
+	struct net2280_dma			*dummy;
+	dma_addr_t				td_dma;	/* of dummy */
+	struct net2280				*dev;
+	unsigned long				irqs;
+
+	/* analogous to a host-side qh */
+	struct list_head			queue;
+	const struct usb_endpoint_descriptor	*desc;
+	unsigned				num : 8,
+						fifo_size : 12,
+						in_fifo_validate : 1,
+						out_overflow : 1,
+						stopped : 1,
+						wedged : 1,
+						is_in : 1,
+						is_iso : 1,
+						responded : 1;
+};
+
+static inline void allow_status(struct net2280_ep *ep)
+{
+	/* ep0 only */
+	writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) |
+		BIT(CLEAR_NAK_OUT_PACKETS) |
+		BIT(CLEAR_NAK_OUT_PACKETS_MODE),
+		&ep->regs->ep_rsp);
+	ep->stopped = 1;
+}
+
+static inline void allow_status_338x(struct net2280_ep *ep)
+{
+	/*
+	 * Control Status Phase Handshake was set by the chip when the setup
+	 * packet arrived. While set, the chip automatically NAKs the host's
+	 * Status Phase tokens.
+	 */
+	writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE), &ep->regs->ep_rsp);
+
+	ep->stopped = 1;
+
+	/* TD 9.9 Halt Endpoint test.  TD 9.22 set feature test. */
+	ep->responded = 0;
+}
+
+struct net2280_request {
+	struct usb_request		req;
+	struct net2280_dma		*td;
+	dma_addr_t			td_dma;
+	struct list_head		queue;
+	unsigned			mapped : 1,
+					valid : 1;
+};
+
+struct net2280 {
+	/* each pci device provides one gadget, several endpoints */
+	struct usb_gadget		gadget;
+	spinlock_t			lock;
+	struct net2280_ep		ep[9];
+	struct usb_gadget_driver	*driver;
+	unsigned			enabled : 1,
+					protocol_stall : 1,
+					softconnect : 1,
+					got_irq : 1,
+					region:1,
+					added:1,
+					u1_enable:1,
+					u2_enable:1,
+					ltm_enable:1,
+					wakeup_enable:1,
+					addressed_state:1,
+					async_callbacks:1,
+					bug7734_patched:1;
+	u16				chiprev;
+	int enhanced_mode;
+	int n_ep;
+	kernel_ulong_t			quirks;
+
+
+	/* pci state used to access those endpoints */
+	struct pci_dev			*pdev;
+	struct net2280_regs		__iomem *regs;
+	struct net2280_usb_regs		__iomem *usb;
+	struct usb338x_usb_ext_regs	__iomem *usb_ext;
+	struct net2280_pci_regs		__iomem *pci;
+	struct net2280_dma_regs		__iomem *dma;
+	struct net2280_dep_regs		__iomem *dep;
+	struct net2280_ep_regs		__iomem *epregs;
+	struct usb338x_ll_regs		__iomem *llregs;
+	struct usb338x_pl_regs		__iomem *plregs;
+
+	struct dma_pool			*requests;
+	/* statistics...*/
+};
+
+static inline void set_halt(struct net2280_ep *ep)
+{
+	/* ep0 and bulk/intr endpoints */
+	writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) |
+		/* set NAK_OUT for erratum 0114 */
+		((ep->dev->chiprev == CHIPREV_1) << SET_NAK_OUT_PACKETS) |
+		BIT(SET_ENDPOINT_HALT),
+		&ep->regs->ep_rsp);
+}
+
+static inline void clear_halt(struct net2280_ep *ep)
+{
+	/* ep0 and bulk/intr endpoints */
+	writel(BIT(CLEAR_ENDPOINT_HALT) |
+		BIT(CLEAR_ENDPOINT_TOGGLE) |
+		    /*
+		     * unless the gadget driver left a short packet in the
+		     * fifo, this reverses the erratum 0114 workaround.
+		     */
+		((ep->dev->chiprev == CHIPREV_1) << CLEAR_NAK_OUT_PACKETS),
+		&ep->regs->ep_rsp);
+}
+
+/*
+ * FSM value for Defect 7374 (U1U2 Test) is managed in
+ * chip's SCRATCH register:
+ */
+#define DEFECT7374_FSM_FIELD    28
+
+/* Waiting for Control Read:
+ *  - A transition to this state indicates a fresh USB connection,
+ *    before the first Setup Packet. The connection speed is not
+ *    known. Firmware is waiting for the first Control Read.
+ *  - Starting state: This state can be thought of as the FSM's typical
+ *    starting state.
+ *  - Tip: Upon the first SS Control Read the FSM never
+ *    returns to this state.
+ */
+#define DEFECT7374_FSM_WAITING_FOR_CONTROL_READ BIT(DEFECT7374_FSM_FIELD)
+
+/* Non-SS Control Read:
+ *  - A transition to this state indicates detection of the first HS
+ *    or FS Control Read.
+ *  - Tip: Upon the first SS Control Read the FSM never
+ *    returns to this state.
+ */
+#define	DEFECT7374_FSM_NON_SS_CONTROL_READ (2 << DEFECT7374_FSM_FIELD)
+
+/* SS Control Read:
+ *  - A transition to this state indicates detection of the
+ *    first SS Control Read.
+ *  - This state indicates workaround completion. Workarounds no longer
+ *    need to be applied (as long as the chip remains powered up).
+ *  - Tip: Once in this state the FSM state does not change (until
+ *    the chip's power is lost and restored).
+ *  - This can be thought of as the final state of the FSM;
+ *    the FSM 'locks-up' in this state until the chip loses power.
+ */
+#define DEFECT7374_FSM_SS_CONTROL_READ (3 << DEFECT7374_FSM_FIELD)
+
+#ifdef USE_RDK_LEDS
+
+static inline void net2280_led_init(struct net2280 *dev)
+{
+	/* LED3 (green) is on during USB activity. note erratum 0113. */
+	writel(BIT(GPIO3_LED_SELECT) |
+		BIT(GPIO3_OUTPUT_ENABLE) |
+		BIT(GPIO2_OUTPUT_ENABLE) |
+		BIT(GPIO1_OUTPUT_ENABLE) |
+		BIT(GPIO0_OUTPUT_ENABLE),
+		&dev->regs->gpioctl);
+}
+
+/* indicate speed with bi-color LED 0/1 */
+static inline
+void net2280_led_speed(struct net2280 *dev, enum usb_device_speed speed)
+{
+	u32	val = readl(&dev->regs->gpioctl);
+	switch (speed) {
+	case USB_SPEED_SUPER:		/* green + red */
+		val |= BIT(GPIO0_DATA) | BIT(GPIO1_DATA);
+		break;
+	case USB_SPEED_HIGH:		/* green */
+		val &= ~BIT(GPIO0_DATA);
+		val |= BIT(GPIO1_DATA);
+		break;
+	case USB_SPEED_FULL:		/* red */
+		val &= ~BIT(GPIO1_DATA);
+		val |= BIT(GPIO0_DATA);
+		break;
+	default:			/* (off/black) */
+		val &= ~(BIT(GPIO1_DATA) | BIT(GPIO0_DATA));
+		break;
+	}
+	writel(val, &dev->regs->gpioctl);
+}
+
+/* indicate power with LED 2 */
+static inline void net2280_led_active(struct net2280 *dev, int is_active)
+{
+	u32	val = readl(&dev->regs->gpioctl);
+
+	/* FIXME this LED never seems to turn on.*/
+	if (is_active)
+		val |= GPIO2_DATA;
+	else
+		val &= ~GPIO2_DATA;
+	writel(val, &dev->regs->gpioctl);
+}
+
+static inline void net2280_led_shutdown(struct net2280 *dev)
+{
+	/* turn off all four GPIO*_DATA bits */
+	writel(readl(&dev->regs->gpioctl) & ~0x0f,
+			&dev->regs->gpioctl);
+}
+
+#else
+
+#define net2280_led_init(dev)		do { } while (0)
+#define net2280_led_speed(dev, speed)	do { } while (0)
+#define net2280_led_shutdown(dev)	do { } while (0)
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#define ep_dbg(ndev, fmt, args...) \
+	dev_dbg((&((ndev)->pdev->dev)), fmt, ##args)
+
+#define ep_vdbg(ndev, fmt, args...) \
+	dev_vdbg((&((ndev)->pdev->dev)), fmt, ##args)
+
+#define ep_info(ndev, fmt, args...) \
+	dev_info((&((ndev)->pdev->dev)), fmt, ##args)
+
+#define ep_warn(ndev, fmt, args...) \
+	dev_warn((&((ndev)->pdev->dev)), fmt, ##args)
+
+#define ep_err(ndev, fmt, args...) \
+	dev_err((&((ndev)->pdev->dev)), fmt, ##args)
+
+/*-------------------------------------------------------------------------*/
+
+static inline void set_fifo_bytecount(struct net2280_ep *ep, unsigned count)
+{
+	if (ep->dev->pdev->vendor == 0x17cc)
+		writeb(count, 2 + (u8 __iomem *) &ep->regs->ep_cfg);
+	else{
+		u32 tmp = readl(&ep->cfg->ep_cfg) &
+					(~(0x07 << EP_FIFO_BYTE_COUNT));
+		writel(tmp | (count << EP_FIFO_BYTE_COUNT), &ep->cfg->ep_cfg);
+	}
+}
+
+static inline void start_out_naking(struct net2280_ep *ep)
+{
+	/* NOTE:  hardware races lurk here, and PING protocol issues */
+	writel(BIT(SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+	/* synch with device */
+	readl(&ep->regs->ep_rsp);
+}
+
+static inline void stop_out_naking(struct net2280_ep *ep)
+{
+	u32	tmp;
+
+	tmp = readl(&ep->regs->ep_stat);
+	if ((tmp & BIT(NAK_OUT_PACKETS)) != 0)
+		writel(BIT(CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+}
+
+
+static inline void set_max_speed(struct net2280_ep *ep, u32 max)
+{
+	u32 reg;
+	static const u32 ep_enhanced[9] = { 0x10, 0x60, 0x30, 0x80,
+					  0x50, 0x20, 0x70, 0x40, 0x90 };
+
+	if (ep->dev->enhanced_mode) {
+		reg = ep_enhanced[ep->num];
+		switch (ep->dev->gadget.speed) {
+		case USB_SPEED_SUPER:
+			reg += 2;
+			break;
+		case USB_SPEED_FULL:
+			reg += 1;
+			break;
+		case USB_SPEED_HIGH:
+		default:
+			break;
+		}
+	} else {
+		reg = (ep->num + 1) * 0x10;
+		if (ep->dev->gadget.speed != USB_SPEED_HIGH)
+			reg += 1;
+	}
+
+	set_idx_reg(ep->dev->regs, reg, max);
+}
+
+#endif	/* __KERNEL__ */
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
new file mode 100644
index 000000000..f660ebfa1
--- /dev/null
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -0,0 +1,3018 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * omap_udc.c -- for OMAP full speed udc; most chips support OTG.
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ * Copyright (C) 2004-2005 David Brownell
+ *
+ * OMAP2 & DMA support by Kyungmin Park <kyungmin.park@samsung.com>
+ */
+
+#undef	DEBUG
+#undef	VERBOSE
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/mm.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/prefetch.h>
+#include <linux/io.h>
+
+#include <asm/byteorder.h>
+#include <asm/irq.h>
+#include <asm/unaligned.h>
+#include <asm/mach-types.h>
+
+#include <linux/omap-dma.h>
+#include <linux/platform_data/usb-omap1.h>
+
+#include <linux/soc/ti/omap1-usb.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-io.h>
+
+#include "omap_udc.h"
+
+#undef	USB_TRACE
+
+/* bulk DMA seems to be behaving for both IN and OUT */
+#define	USE_DMA
+
+/* ISO too */
+#define	USE_ISO
+
+#define	DRIVER_DESC	"OMAP UDC driver"
+#define	DRIVER_VERSION	"4 October 2004"
+
+#define OMAP_DMA_USB_W2FC_TX0		29
+#define OMAP_DMA_USB_W2FC_RX0		26
+
+/*
+ * The OMAP UDC needs _very_ early endpoint setup:  before enabling the
+ * D+ pullup to allow enumeration.  That's too early for the gadget
+ * framework to use from usb_endpoint_enable(), which happens after
+ * enumeration as part of activating an interface.  (But if we add an
+ * optional new "UDC not yet running" state to the gadget driver model,
+ * even just during driver binding, the endpoint autoconfig logic is the
+ * natural spot to manufacture new endpoints.)
+ *
+ * So instead of using endpoint enable calls to control the hardware setup,
+ * this driver defines a "fifo mode" parameter.  It's used during driver
+ * initialization to choose among a set of pre-defined endpoint configs.
+ * See omap_udc_setup() for available modes, or to add others.  That code
+ * lives in an init section, so use this driver as a module if you need
+ * to change the fifo mode after the kernel boots.
+ *
+ * Gadget drivers normally ignore endpoints they don't care about, and
+ * won't include them in configuration descriptors.  That means only
+ * misbehaving hosts would even notice they exist.
+ */
+#ifdef	USE_ISO
+static unsigned fifo_mode = 3;
+#else
+static unsigned fifo_mode;
+#endif
+
+/* "modprobe omap_udc fifo_mode=42", or else as a kernel
+ * boot parameter "omap_udc:fifo_mode=42"
+ */
+module_param(fifo_mode, uint, 0);
+MODULE_PARM_DESC(fifo_mode, "endpoint configuration");
+
+#ifdef	USE_DMA
+static bool use_dma = 1;
+
+/* "modprobe omap_udc use_dma=y", or else as a kernel
+ * boot parameter "omap_udc:use_dma=y"
+ */
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC(use_dma, "enable/disable DMA");
+#else	/* !USE_DMA */
+
+/* save a bit of code */
+#define	use_dma		0
+#endif	/* !USE_DMA */
+
+
+static const char driver_name[] = "omap_udc";
+static const char driver_desc[] = DRIVER_DESC;
+
+/*-------------------------------------------------------------------------*/
+
+/* there's a notion of "current endpoint" for modifying endpoint
+ * state, and PIO access to its FIFO.
+ */
+
+static void use_ep(struct omap_ep *ep, u16 select)
+{
+	u16	num = ep->bEndpointAddress & 0x0f;
+
+	if (ep->bEndpointAddress & USB_DIR_IN)
+		num |= UDC_EP_DIR;
+	omap_writew(num | select, UDC_EP_NUM);
+	/* when select, MUST deselect later !! */
+}
+
+static inline void deselect_ep(void)
+{
+	u16 w;
+
+	w = omap_readw(UDC_EP_NUM);
+	w &= ~UDC_EP_SEL;
+	omap_writew(w, UDC_EP_NUM);
+	/* 6 wait states before TX will happen */
+}
+
+static void dma_channel_claim(struct omap_ep *ep, unsigned preferred);
+
+/*-------------------------------------------------------------------------*/
+
+static int omap_ep_enable(struct usb_ep *_ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct omap_ep	*ep = container_of(_ep, struct omap_ep, ep);
+	struct omap_udc	*udc;
+	unsigned long	flags;
+	u16		maxp;
+
+	/* catch various bogus parameters */
+	if (!_ep || !desc
+			|| desc->bDescriptorType != USB_DT_ENDPOINT
+			|| ep->bEndpointAddress != desc->bEndpointAddress
+			|| ep->maxpacket < usb_endpoint_maxp(desc)) {
+		DBG("%s, bad ep or descriptor\n", __func__);
+		return -EINVAL;
+	}
+	maxp = usb_endpoint_maxp(desc);
+	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
+				&& maxp != ep->maxpacket)
+			|| usb_endpoint_maxp(desc) > ep->maxpacket
+			|| !desc->wMaxPacketSize) {
+		DBG("%s, bad %s maxpacket\n", __func__, _ep->name);
+		return -ERANGE;
+	}
+
+#ifdef	USE_ISO
+	if ((desc->bmAttributes == USB_ENDPOINT_XFER_ISOC
+				&& desc->bInterval != 1)) {
+		/* hardware wants period = 1; USB allows 2^(Interval-1) */
+		DBG("%s, unsupported ISO period %dms\n", _ep->name,
+				1 << (desc->bInterval - 1));
+		return -EDOM;
+	}
+#else
+	if (desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+		DBG("%s, ISO nyet\n", _ep->name);
+		return -EDOM;
+	}
+#endif
+
+	/* xfer types must match, except that interrupt ~= bulk */
+	if (ep->bmAttributes != desc->bmAttributes
+			&& ep->bmAttributes != USB_ENDPOINT_XFER_BULK
+			&& desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
+		DBG("%s, %s type mismatch\n", __func__, _ep->name);
+		return -EINVAL;
+	}
+
+	udc = ep->udc;
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
+		DBG("%s, bogus device state\n", __func__);
+		return -ESHUTDOWN;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	ep->ep.desc = desc;
+	ep->irqs = 0;
+	ep->stopped = 0;
+	ep->ep.maxpacket = maxp;
+
+	/* set endpoint to initial state */
+	ep->dma_channel = 0;
+	ep->has_dma = 0;
+	ep->lch = -1;
+	use_ep(ep, UDC_EP_SEL);
+	omap_writew(udc->clr_halt, UDC_CTRL);
+	ep->ackwait = 0;
+	deselect_ep();
+
+	if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
+		list_add(&ep->iso, &udc->iso);
+
+	/* maybe assign a DMA channel to this endpoint */
+	if (use_dma && desc->bmAttributes == USB_ENDPOINT_XFER_BULK)
+		/* FIXME ISO can dma, but prefers first channel */
+		dma_channel_claim(ep, 0);
+
+	/* PIO OUT may RX packets */
+	if (desc->bmAttributes != USB_ENDPOINT_XFER_ISOC
+			&& !ep->has_dma
+			&& !(ep->bEndpointAddress & USB_DIR_IN)) {
+		omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+		ep->ackwait = 1 + ep->double_buf;
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	VDBG("%s enabled\n", _ep->name);
+	return 0;
+}
+
+static void nuke(struct omap_ep *, int status);
+
+static int omap_ep_disable(struct usb_ep *_ep)
+{
+	struct omap_ep	*ep = container_of(_ep, struct omap_ep, ep);
+	unsigned long	flags;
+
+	if (!_ep || !ep->ep.desc) {
+		DBG("%s, %s not enabled\n", __func__,
+			_ep ? ep->ep.name : NULL);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+	ep->ep.desc = NULL;
+	nuke(ep, -ESHUTDOWN);
+	ep->ep.maxpacket = ep->maxpacket;
+	ep->has_dma = 0;
+	omap_writew(UDC_SET_HALT, UDC_CTRL);
+	list_del_init(&ep->iso);
+	del_timer(&ep->timer);
+
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+
+	VDBG("%s disabled\n", _ep->name);
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_request *
+omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
+{
+	struct omap_req	*req;
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void
+omap_free_request(struct usb_ep *ep, struct usb_request *_req)
+{
+	struct omap_req	*req = container_of(_req, struct omap_req, req);
+
+	kfree(req);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void
+done(struct omap_ep *ep, struct omap_req *req, int status)
+{
+	struct omap_udc		*udc = ep->udc;
+	unsigned		stopped = ep->stopped;
+
+	list_del_init(&req->queue);
+
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	if (use_dma && ep->has_dma)
+		usb_gadget_unmap_request(&udc->gadget, &req->req,
+				(ep->bEndpointAddress & USB_DIR_IN));
+
+#ifndef	USB_TRACE
+	if (status && status != -ESHUTDOWN)
+#endif
+		VDBG("complete %s req %p stat %d len %u/%u\n",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length);
+
+	/* don't modify queue heads during completion callback */
+	ep->stopped = 1;
+	spin_unlock(&ep->udc->lock);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&ep->udc->lock);
+	ep->stopped = stopped;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define UDC_FIFO_FULL		(UDC_NON_ISO_FIFO_FULL | UDC_ISO_FIFO_FULL)
+#define UDC_FIFO_UNWRITABLE	(UDC_EP_HALTED | UDC_FIFO_FULL)
+
+#define FIFO_EMPTY	(UDC_NON_ISO_FIFO_EMPTY | UDC_ISO_FIFO_EMPTY)
+#define FIFO_UNREADABLE (UDC_EP_HALTED | FIFO_EMPTY)
+
+static inline int
+write_packet(u8 *buf, struct omap_req *req, unsigned max)
+{
+	unsigned	len;
+	u16		*wp;
+
+	len = min(req->req.length - req->req.actual, max);
+	req->req.actual += len;
+
+	max = len;
+	if (likely((((int)buf) & 1) == 0)) {
+		wp = (u16 *)buf;
+		while (max >= 2) {
+			omap_writew(*wp++, UDC_DATA);
+			max -= 2;
+		}
+		buf = (u8 *)wp;
+	}
+	while (max--)
+		omap_writeb(*buf++, UDC_DATA);
+	return len;
+}
+
+/* FIXME change r/w fifo calling convention */
+
+
+/* return:  0 = still running, 1 = completed, negative = errno */
+static int write_fifo(struct omap_ep *ep, struct omap_req *req)
+{
+	u8		*buf;
+	unsigned	count;
+	int		is_last;
+	u16		ep_stat;
+
+	buf = req->req.buf + req->req.actual;
+	prefetch(buf);
+
+	/* PIO-IN isn't double buffered except for iso */
+	ep_stat = omap_readw(UDC_STAT_FLG);
+	if (ep_stat & UDC_FIFO_UNWRITABLE)
+		return 0;
+
+	count = ep->ep.maxpacket;
+	count = write_packet(buf, req, count);
+	omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+	ep->ackwait = 1;
+
+	/* last packet is often short (sometimes a zlp) */
+	if (count != ep->ep.maxpacket)
+		is_last = 1;
+	else if (req->req.length == req->req.actual
+			&& !req->req.zero)
+		is_last = 1;
+	else
+		is_last = 0;
+
+	/* NOTE:  requests complete when all IN data is in a
+	 * FIFO (or sometimes later, if a zlp was needed).
+	 * Use usb_ep_fifo_status() where needed.
+	 */
+	if (is_last)
+		done(ep, req, 0);
+	return is_last;
+}
+
+static inline int
+read_packet(u8 *buf, struct omap_req *req, unsigned avail)
+{
+	unsigned	len;
+	u16		*wp;
+
+	len = min(req->req.length - req->req.actual, avail);
+	req->req.actual += len;
+	avail = len;
+
+	if (likely((((int)buf) & 1) == 0)) {
+		wp = (u16 *)buf;
+		while (avail >= 2) {
+			*wp++ = omap_readw(UDC_DATA);
+			avail -= 2;
+		}
+		buf = (u8 *)wp;
+	}
+	while (avail--)
+		*buf++ = omap_readb(UDC_DATA);
+	return len;
+}
+
+/* return:  0 = still running, 1 = queue empty, negative = errno */
+static int read_fifo(struct omap_ep *ep, struct omap_req *req)
+{
+	u8		*buf;
+	unsigned	count, avail;
+	int		is_last;
+
+	buf = req->req.buf + req->req.actual;
+	prefetchw(buf);
+
+	for (;;) {
+		u16	ep_stat = omap_readw(UDC_STAT_FLG);
+
+		is_last = 0;
+		if (ep_stat & FIFO_EMPTY) {
+			if (!ep->double_buf)
+				break;
+			ep->fnf = 1;
+		}
+		if (ep_stat & UDC_EP_HALTED)
+			break;
+
+		if (ep_stat & UDC_FIFO_FULL)
+			avail = ep->ep.maxpacket;
+		else  {
+			avail = omap_readw(UDC_RXFSTAT);
+			ep->fnf = ep->double_buf;
+		}
+		count = read_packet(buf, req, avail);
+
+		/* partial packet reads may not be errors */
+		if (count < ep->ep.maxpacket) {
+			is_last = 1;
+			/* overflowed this request?  flush extra data */
+			if (count != avail) {
+				req->req.status = -EOVERFLOW;
+				avail -= count;
+				while (avail--)
+					omap_readw(UDC_DATA);
+			}
+		} else if (req->req.length == req->req.actual)
+			is_last = 1;
+		else
+			is_last = 0;
+
+		if (!ep->bEndpointAddress)
+			break;
+		if (is_last)
+			done(ep, req, 0);
+		break;
+	}
+	return is_last;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start)
+{
+	dma_addr_t	end;
+
+	/* IN-DMA needs this on fault/cancel paths, so 15xx misreports
+	 * the last transfer's bytecount by more than a FIFO's worth.
+	 */
+	if (cpu_is_omap15xx())
+		return 0;
+
+	end = omap_get_dma_src_pos(ep->lch);
+	if (end == ep->dma_counter)
+		return 0;
+
+	end |= start & (0xffff << 16);
+	if (end < start)
+		end += 0x10000;
+	return end - start;
+}
+
+static u16 dma_dest_len(struct omap_ep *ep, dma_addr_t start)
+{
+	dma_addr_t	end;
+
+	end = omap_get_dma_dst_pos(ep->lch);
+	if (end == ep->dma_counter)
+		return 0;
+
+	end |= start & (0xffff << 16);
+	if (cpu_is_omap15xx())
+		end++;
+	if (end < start)
+		end += 0x10000;
+	return end - start;
+}
+
+
+/* Each USB transfer request using DMA maps to one or more DMA transfers.
+ * When DMA completion isn't request completion, the UDC continues with
+ * the next DMA transfer for that USB transfer.
+ */
+
+static void next_in_dma(struct omap_ep *ep, struct omap_req *req)
+{
+	u16		txdma_ctrl, w;
+	unsigned	length = req->req.length - req->req.actual;
+	const int	sync_mode = cpu_is_omap15xx()
+				? OMAP_DMA_SYNC_FRAME
+				: OMAP_DMA_SYNC_ELEMENT;
+	int		dma_trigger = 0;
+
+	/* measure length in either bytes or packets */
+	if ((cpu_is_omap16xx() && length <= UDC_TXN_TSC)
+			|| (cpu_is_omap15xx() && length < ep->maxpacket)) {
+		txdma_ctrl = UDC_TXN_EOT | length;
+		omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
+				length, 1, sync_mode, dma_trigger, 0);
+	} else {
+		length = min(length / ep->maxpacket,
+				(unsigned) UDC_TXN_TSC + 1);
+		txdma_ctrl = length;
+		omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
+				ep->ep.maxpacket >> 1, length, sync_mode,
+				dma_trigger, 0);
+		length *= ep->maxpacket;
+	}
+	omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_EMIFF,
+		OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
+		0, 0);
+
+	omap_start_dma(ep->lch);
+	ep->dma_counter = omap_get_dma_src_pos(ep->lch);
+	w = omap_readw(UDC_DMA_IRQ_EN);
+	w |= UDC_TX_DONE_IE(ep->dma_channel);
+	omap_writew(w, UDC_DMA_IRQ_EN);
+	omap_writew(UDC_TXN_START | txdma_ctrl, UDC_TXDMA(ep->dma_channel));
+	req->dma_bytes = length;
+}
+
+static void finish_in_dma(struct omap_ep *ep, struct omap_req *req, int status)
+{
+	u16 w;
+
+	if (status == 0) {
+		req->req.actual += req->dma_bytes;
+
+		/* return if this request needs to send data or zlp */
+		if (req->req.actual < req->req.length)
+			return;
+		if (req->req.zero
+				&& req->dma_bytes != 0
+				&& (req->req.actual % ep->maxpacket) == 0)
+			return;
+	} else
+		req->req.actual += dma_src_len(ep, req->req.dma
+							+ req->req.actual);
+
+	/* tx completion */
+	omap_stop_dma(ep->lch);
+	w = omap_readw(UDC_DMA_IRQ_EN);
+	w &= ~UDC_TX_DONE_IE(ep->dma_channel);
+	omap_writew(w, UDC_DMA_IRQ_EN);
+	done(ep, req, status);
+}
+
+static void next_out_dma(struct omap_ep *ep, struct omap_req *req)
+{
+	unsigned packets = req->req.length - req->req.actual;
+	int dma_trigger = 0;
+	u16 w;
+
+	/* set up this DMA transfer, enable the fifo, start */
+	packets /= ep->ep.maxpacket;
+	packets = min(packets, (unsigned)UDC_RXN_TC + 1);
+	req->dma_bytes = packets * ep->ep.maxpacket;
+	omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
+			ep->ep.maxpacket >> 1, packets,
+			OMAP_DMA_SYNC_ELEMENT,
+			dma_trigger, 0);
+	omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF,
+		OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
+		0, 0);
+	ep->dma_counter = omap_get_dma_dst_pos(ep->lch);
+
+	omap_writew(UDC_RXN_STOP | (packets - 1), UDC_RXDMA(ep->dma_channel));
+	w = omap_readw(UDC_DMA_IRQ_EN);
+	w |= UDC_RX_EOT_IE(ep->dma_channel);
+	omap_writew(w, UDC_DMA_IRQ_EN);
+	omap_writew(ep->bEndpointAddress & 0xf, UDC_EP_NUM);
+	omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+
+	omap_start_dma(ep->lch);
+}
+
+static void
+finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status, int one)
+{
+	u16	count, w;
+
+	if (status == 0)
+		ep->dma_counter = (u16) (req->req.dma + req->req.actual);
+	count = dma_dest_len(ep, req->req.dma + req->req.actual);
+	count += req->req.actual;
+	if (one)
+		count--;
+	if (count <= req->req.length)
+		req->req.actual = count;
+
+	if (count != req->dma_bytes || status)
+		omap_stop_dma(ep->lch);
+
+	/* if this wasn't short, request may need another transfer */
+	else if (req->req.actual < req->req.length)
+		return;
+
+	/* rx completion */
+	w = omap_readw(UDC_DMA_IRQ_EN);
+	w &= ~UDC_RX_EOT_IE(ep->dma_channel);
+	omap_writew(w, UDC_DMA_IRQ_EN);
+	done(ep, req, status);
+}
+
+static void dma_irq(struct omap_udc *udc, u16 irq_src)
+{
+	u16		dman_stat = omap_readw(UDC_DMAN_STAT);
+	struct omap_ep	*ep;
+	struct omap_req	*req;
+
+	/* IN dma: tx to host */
+	if (irq_src & UDC_TXN_DONE) {
+		ep = &udc->ep[16 + UDC_DMA_TX_SRC(dman_stat)];
+		ep->irqs++;
+		/* can see TXN_DONE after dma abort */
+		if (!list_empty(&ep->queue)) {
+			req = container_of(ep->queue.next,
+						struct omap_req, queue);
+			finish_in_dma(ep, req, 0);
+		}
+		omap_writew(UDC_TXN_DONE, UDC_IRQ_SRC);
+
+		if (!list_empty(&ep->queue)) {
+			req = container_of(ep->queue.next,
+					struct omap_req, queue);
+			next_in_dma(ep, req);
+		}
+	}
+
+	/* OUT dma: rx from host */
+	if (irq_src & UDC_RXN_EOT) {
+		ep = &udc->ep[UDC_DMA_RX_SRC(dman_stat)];
+		ep->irqs++;
+		/* can see RXN_EOT after dma abort */
+		if (!list_empty(&ep->queue)) {
+			req = container_of(ep->queue.next,
+					struct omap_req, queue);
+			finish_out_dma(ep, req, 0, dman_stat & UDC_DMA_RX_SB);
+		}
+		omap_writew(UDC_RXN_EOT, UDC_IRQ_SRC);
+
+		if (!list_empty(&ep->queue)) {
+			req = container_of(ep->queue.next,
+					struct omap_req, queue);
+			next_out_dma(ep, req);
+		}
+	}
+
+	if (irq_src & UDC_RXN_CNT) {
+		ep = &udc->ep[UDC_DMA_RX_SRC(dman_stat)];
+		ep->irqs++;
+		/* omap15xx does this unasked... */
+		VDBG("%s, RX_CNT irq?\n", ep->ep.name);
+		omap_writew(UDC_RXN_CNT, UDC_IRQ_SRC);
+	}
+}
+
+static void dma_error(int lch, u16 ch_status, void *data)
+{
+	struct omap_ep	*ep = data;
+
+	/* if ch_status & OMAP_DMA_DROP_IRQ ... */
+	/* if ch_status & OMAP1_DMA_TOUT_IRQ ... */
+	ERR("%s dma error, lch %d status %02x\n", ep->ep.name, lch, ch_status);
+
+	/* complete current transfer ... */
+}
+
+static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
+{
+	u16	reg;
+	int	status, restart, is_in;
+	int	dma_channel;
+
+	is_in = ep->bEndpointAddress & USB_DIR_IN;
+	if (is_in)
+		reg = omap_readw(UDC_TXDMA_CFG);
+	else
+		reg = omap_readw(UDC_RXDMA_CFG);
+	reg |= UDC_DMA_REQ;		/* "pulse" activated */
+
+	ep->dma_channel = 0;
+	ep->lch = -1;
+	if (channel == 0 || channel > 3) {
+		if ((reg & 0x0f00) == 0)
+			channel = 3;
+		else if ((reg & 0x00f0) == 0)
+			channel = 2;
+		else if ((reg & 0x000f) == 0)	/* preferred for ISO */
+			channel = 1;
+		else {
+			status = -EMLINK;
+			goto just_restart;
+		}
+	}
+	reg |= (0x0f & ep->bEndpointAddress) << (4 * (channel - 1));
+	ep->dma_channel = channel;
+
+	if (is_in) {
+		dma_channel = OMAP_DMA_USB_W2FC_TX0 - 1 + channel;
+		status = omap_request_dma(dma_channel,
+			ep->ep.name, dma_error, ep, &ep->lch);
+		if (status == 0) {
+			omap_writew(reg, UDC_TXDMA_CFG);
+			/* EMIFF or SDRC */
+			omap_set_dma_src_burst_mode(ep->lch,
+						OMAP_DMA_DATA_BURST_4);
+			omap_set_dma_src_data_pack(ep->lch, 1);
+			/* TIPB */
+			omap_set_dma_dest_params(ep->lch,
+				OMAP_DMA_PORT_TIPB,
+				OMAP_DMA_AMODE_CONSTANT,
+				UDC_DATA_DMA,
+				0, 0);
+		}
+	} else {
+		dma_channel = OMAP_DMA_USB_W2FC_RX0 - 1 + channel;
+		status = omap_request_dma(dma_channel,
+			ep->ep.name, dma_error, ep, &ep->lch);
+		if (status == 0) {
+			omap_writew(reg, UDC_RXDMA_CFG);
+			/* TIPB */
+			omap_set_dma_src_params(ep->lch,
+				OMAP_DMA_PORT_TIPB,
+				OMAP_DMA_AMODE_CONSTANT,
+				UDC_DATA_DMA,
+				0, 0);
+			/* EMIFF or SDRC */
+			omap_set_dma_dest_burst_mode(ep->lch,
+						OMAP_DMA_DATA_BURST_4);
+			omap_set_dma_dest_data_pack(ep->lch, 1);
+		}
+	}
+	if (status)
+		ep->dma_channel = 0;
+	else {
+		ep->has_dma = 1;
+		omap_disable_dma_irq(ep->lch, OMAP_DMA_BLOCK_IRQ);
+
+		/* channel type P: hw synch (fifo) */
+		if (!cpu_is_omap15xx())
+			omap_set_dma_channel_mode(ep->lch, OMAP_DMA_LCH_P);
+	}
+
+just_restart:
+	/* restart any queue, even if the claim failed  */
+	restart = !ep->stopped && !list_empty(&ep->queue);
+
+	if (status)
+		DBG("%s no dma channel: %d%s\n", ep->ep.name, status,
+			restart ? " (restart)" : "");
+	else
+		DBG("%s claimed %cxdma%d lch %d%s\n", ep->ep.name,
+			is_in ? 't' : 'r',
+			ep->dma_channel - 1, ep->lch,
+			restart ? " (restart)" : "");
+
+	if (restart) {
+		struct omap_req	*req;
+		req = container_of(ep->queue.next, struct omap_req, queue);
+		if (ep->has_dma)
+			(is_in ? next_in_dma : next_out_dma)(ep, req);
+		else {
+			use_ep(ep, UDC_EP_SEL);
+			(is_in ? write_fifo : read_fifo)(ep, req);
+			deselect_ep();
+			if (!is_in) {
+				omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+				ep->ackwait = 1 + ep->double_buf;
+			}
+			/* IN: 6 wait states before it'll tx */
+		}
+	}
+}
+
+static void dma_channel_release(struct omap_ep *ep)
+{
+	int		shift = 4 * (ep->dma_channel - 1);
+	u16		mask = 0x0f << shift;
+	struct omap_req	*req;
+	int		active;
+
+	/* abort any active usb transfer request */
+	if (!list_empty(&ep->queue))
+		req = container_of(ep->queue.next, struct omap_req, queue);
+	else
+		req = NULL;
+
+	active = omap_get_dma_active_status(ep->lch);
+
+	DBG("%s release %s %cxdma%d %p\n", ep->ep.name,
+			active ? "active" : "idle",
+			(ep->bEndpointAddress & USB_DIR_IN) ? 't' : 'r',
+			ep->dma_channel - 1, req);
+
+	/* NOTE: re-setting RX_REQ/TX_REQ because of a chip bug (before
+	 * OMAP 1710 ES2.0) where reading the DMA_CFG can clear them.
+	 */
+
+	/* wait till current packet DMA finishes, and fifo empties */
+	if (ep->bEndpointAddress & USB_DIR_IN) {
+		omap_writew((omap_readw(UDC_TXDMA_CFG) & ~mask) | UDC_DMA_REQ,
+					UDC_TXDMA_CFG);
+
+		if (req) {
+			finish_in_dma(ep, req, -ECONNRESET);
+
+			/* clear FIFO; hosts probably won't empty it */
+			use_ep(ep, UDC_EP_SEL);
+			omap_writew(UDC_CLR_EP, UDC_CTRL);
+			deselect_ep();
+		}
+		while (omap_readw(UDC_TXDMA_CFG) & mask)
+			udelay(10);
+	} else {
+		omap_writew((omap_readw(UDC_RXDMA_CFG) & ~mask) | UDC_DMA_REQ,
+					UDC_RXDMA_CFG);
+
+		/* dma empties the fifo */
+		while (omap_readw(UDC_RXDMA_CFG) & mask)
+			udelay(10);
+		if (req)
+			finish_out_dma(ep, req, -ECONNRESET, 0);
+	}
+	omap_free_dma(ep->lch);
+	ep->dma_channel = 0;
+	ep->lch = -1;
+	/* has_dma still set, till endpoint is fully quiesced */
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int
+omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct omap_ep	*ep = container_of(_ep, struct omap_ep, ep);
+	struct omap_req	*req = container_of(_req, struct omap_req, req);
+	struct omap_udc	*udc;
+	unsigned long	flags;
+	int		is_iso = 0;
+
+	/* catch various bogus parameters */
+	if (!_req || !req->req.complete || !req->req.buf
+			|| !list_empty(&req->queue)) {
+		DBG("%s, bad params\n", __func__);
+		return -EINVAL;
+	}
+	if (!_ep || (!ep->ep.desc && ep->bEndpointAddress)) {
+		DBG("%s, bad ep\n", __func__);
+		return -EINVAL;
+	}
+	if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+		if (req->req.length > ep->ep.maxpacket)
+			return -EMSGSIZE;
+		is_iso = 1;
+	}
+
+	/* this isn't bogus, but OMAP DMA isn't the only hardware to
+	 * have a hard time with partial packet reads...  reject it.
+	 */
+	if (use_dma
+			&& ep->has_dma
+			&& ep->bEndpointAddress != 0
+			&& (ep->bEndpointAddress & USB_DIR_IN) == 0
+			&& (req->req.length % ep->ep.maxpacket) != 0) {
+		DBG("%s, no partial packet OUT reads\n", __func__);
+		return -EMSGSIZE;
+	}
+
+	udc = ep->udc;
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	if (use_dma && ep->has_dma)
+		usb_gadget_map_request(&udc->gadget, &req->req,
+				(ep->bEndpointAddress & USB_DIR_IN));
+
+	VDBG("%s queue req %p, len %d buf %p\n",
+		ep->ep.name, _req, _req->length, _req->buf);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+
+	/* maybe kickstart non-iso i/o queues */
+	if (is_iso) {
+		u16 w;
+
+		w = omap_readw(UDC_IRQ_EN);
+		w |= UDC_SOF_IE;
+		omap_writew(w, UDC_IRQ_EN);
+	} else if (list_empty(&ep->queue) && !ep->stopped && !ep->ackwait) {
+		int	is_in;
+
+		if (ep->bEndpointAddress == 0) {
+			if (!udc->ep0_pending || !list_empty(&ep->queue)) {
+				spin_unlock_irqrestore(&udc->lock, flags);
+				return -EL2HLT;
+			}
+
+			/* empty DATA stage? */
+			is_in = udc->ep0_in;
+			if (!req->req.length) {
+
+				/* chip became CONFIGURED or ADDRESSED
+				 * earlier; drivers may already have queued
+				 * requests to non-control endpoints
+				 */
+				if (udc->ep0_set_config) {
+					u16	irq_en = omap_readw(UDC_IRQ_EN);
+
+					irq_en |= UDC_DS_CHG_IE | UDC_EP0_IE;
+					if (!udc->ep0_reset_config)
+						irq_en |= UDC_EPN_RX_IE
+							| UDC_EPN_TX_IE;
+					omap_writew(irq_en, UDC_IRQ_EN);
+				}
+
+				/* STATUS for zero length DATA stages is
+				 * always an IN ... even for IN transfers,
+				 * a weird case which seem to stall OMAP.
+				 */
+				omap_writew(UDC_EP_SEL | UDC_EP_DIR,
+						UDC_EP_NUM);
+				omap_writew(UDC_CLR_EP, UDC_CTRL);
+				omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+				omap_writew(UDC_EP_DIR, UDC_EP_NUM);
+
+				/* cleanup */
+				udc->ep0_pending = 0;
+				done(ep, req, 0);
+				req = NULL;
+
+			/* non-empty DATA stage */
+			} else if (is_in) {
+				omap_writew(UDC_EP_SEL | UDC_EP_DIR,
+						UDC_EP_NUM);
+			} else {
+				if (udc->ep0_setup)
+					goto irq_wait;
+				omap_writew(UDC_EP_SEL, UDC_EP_NUM);
+			}
+		} else {
+			is_in = ep->bEndpointAddress & USB_DIR_IN;
+			if (!ep->has_dma)
+				use_ep(ep, UDC_EP_SEL);
+			/* if ISO: SOF IRQs must be enabled/disabled! */
+		}
+
+		if (ep->has_dma)
+			(is_in ? next_in_dma : next_out_dma)(ep, req);
+		else if (req) {
+			if ((is_in ? write_fifo : read_fifo)(ep, req) == 1)
+				req = NULL;
+			deselect_ep();
+			if (!is_in) {
+				omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+				ep->ackwait = 1 + ep->double_buf;
+			}
+			/* IN: 6 wait states before it'll tx */
+		}
+	}
+
+irq_wait:
+	/* irq handler advances the queue */
+	if (req != NULL)
+		list_add_tail(&req->queue, &ep->queue);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int omap_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct omap_ep	*ep = container_of(_ep, struct omap_ep, ep);
+	struct omap_req	*req = NULL, *iter;
+	unsigned long	flags;
+
+	if (!_ep || !_req)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		req = iter;
+		break;
+	}
+	if (!req) {
+		spin_unlock_irqrestore(&ep->udc->lock, flags);
+		return -EINVAL;
+	}
+
+	if (use_dma && ep->dma_channel && ep->queue.next == &req->queue) {
+		int channel = ep->dma_channel;
+
+		/* releasing the channel cancels the request,
+		 * reclaiming the channel restarts the queue
+		 */
+		dma_channel_release(ep);
+		dma_channel_claim(ep, channel);
+	} else
+		done(ep, req, -ECONNRESET);
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int omap_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	struct omap_ep	*ep = container_of(_ep, struct omap_ep, ep);
+	unsigned long	flags;
+	int		status = -EOPNOTSUPP;
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+
+	/* just use protocol stalls for ep0; real halts are annoying */
+	if (ep->bEndpointAddress == 0) {
+		if (!ep->udc->ep0_pending)
+			status = -EINVAL;
+		else if (value) {
+			if (ep->udc->ep0_set_config) {
+				WARNING("error changing config?\n");
+				omap_writew(UDC_CLR_CFG, UDC_SYSCON2);
+			}
+			omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
+			ep->udc->ep0_pending = 0;
+			status = 0;
+		} else /* NOP */
+			status = 0;
+
+	/* otherwise, all active non-ISO endpoints can halt */
+	} else if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC && ep->ep.desc) {
+
+		/* IN endpoints must already be idle */
+		if ((ep->bEndpointAddress & USB_DIR_IN)
+				&& !list_empty(&ep->queue)) {
+			status = -EAGAIN;
+			goto done;
+		}
+
+		if (value) {
+			int	channel;
+
+			if (use_dma && ep->dma_channel
+					&& !list_empty(&ep->queue)) {
+				channel = ep->dma_channel;
+				dma_channel_release(ep);
+			} else
+				channel = 0;
+
+			use_ep(ep, UDC_EP_SEL);
+			if (omap_readw(UDC_STAT_FLG) & UDC_NON_ISO_FIFO_EMPTY) {
+				omap_writew(UDC_SET_HALT, UDC_CTRL);
+				status = 0;
+			} else
+				status = -EAGAIN;
+			deselect_ep();
+
+			if (channel)
+				dma_channel_claim(ep, channel);
+		} else {
+			use_ep(ep, 0);
+			omap_writew(ep->udc->clr_halt, UDC_CTRL);
+			ep->ackwait = 0;
+			if (!(ep->bEndpointAddress & USB_DIR_IN)) {
+				omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+				ep->ackwait = 1 + ep->double_buf;
+			}
+		}
+	}
+done:
+	VDBG("%s %s halt stat %d\n", ep->ep.name,
+		value ? "set" : "clear", status);
+
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+	return status;
+}
+
+static const struct usb_ep_ops omap_ep_ops = {
+	.enable		= omap_ep_enable,
+	.disable	= omap_ep_disable,
+
+	.alloc_request	= omap_alloc_request,
+	.free_request	= omap_free_request,
+
+	.queue		= omap_ep_queue,
+	.dequeue	= omap_ep_dequeue,
+
+	.set_halt	= omap_ep_set_halt,
+	/* fifo_status ... report bytes in fifo */
+	/* fifo_flush ... flush fifo */
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int omap_get_frame(struct usb_gadget *gadget)
+{
+	u16	sof = omap_readw(UDC_SOF);
+	return (sof & UDC_TS_OK) ? (sof & UDC_TS) : -EL2NSYNC;
+}
+
+static int omap_wakeup(struct usb_gadget *gadget)
+{
+	struct omap_udc	*udc;
+	unsigned long	flags;
+	int		retval = -EHOSTUNREACH;
+
+	udc = container_of(gadget, struct omap_udc, gadget);
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (udc->devstat & UDC_SUS) {
+		/* NOTE:  OTG spec erratum says that OTG devices may
+		 * issue wakeups without host enable.
+		 */
+		if (udc->devstat & (UDC_B_HNP_ENABLE|UDC_R_WK_OK)) {
+			DBG("remote wakeup...\n");
+			omap_writew(UDC_RMT_WKP, UDC_SYSCON2);
+			retval = 0;
+		}
+
+	/* NOTE:  non-OTG systems may use SRP TOO... */
+	} else if (!(udc->devstat & UDC_ATT)) {
+		if (!IS_ERR_OR_NULL(udc->transceiver))
+			retval = otg_start_srp(udc->transceiver->otg);
+	}
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return retval;
+}
+
+static int
+omap_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered)
+{
+	struct omap_udc	*udc;
+	unsigned long	flags;
+	u16		syscon1;
+
+	gadget->is_selfpowered = (is_selfpowered != 0);
+	udc = container_of(gadget, struct omap_udc, gadget);
+	spin_lock_irqsave(&udc->lock, flags);
+	syscon1 = omap_readw(UDC_SYSCON1);
+	if (is_selfpowered)
+		syscon1 |= UDC_SELF_PWR;
+	else
+		syscon1 &= ~UDC_SELF_PWR;
+	omap_writew(syscon1, UDC_SYSCON1);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int can_pullup(struct omap_udc *udc)
+{
+	return udc->driver && udc->softconnect && udc->vbus_active;
+}
+
+static void pullup_enable(struct omap_udc *udc)
+{
+	u16 w;
+
+	w = omap_readw(UDC_SYSCON1);
+	w |= UDC_PULLUP_EN;
+	omap_writew(w, UDC_SYSCON1);
+	if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx()) {
+		u32 l;
+
+		l = omap_readl(OTG_CTRL);
+		l |= OTG_BSESSVLD;
+		omap_writel(l, OTG_CTRL);
+	}
+	omap_writew(UDC_DS_CHG_IE, UDC_IRQ_EN);
+}
+
+static void pullup_disable(struct omap_udc *udc)
+{
+	u16 w;
+
+	if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx()) {
+		u32 l;
+
+		l = omap_readl(OTG_CTRL);
+		l &= ~OTG_BSESSVLD;
+		omap_writel(l, OTG_CTRL);
+	}
+	omap_writew(UDC_DS_CHG_IE, UDC_IRQ_EN);
+	w = omap_readw(UDC_SYSCON1);
+	w &= ~UDC_PULLUP_EN;
+	omap_writew(w, UDC_SYSCON1);
+}
+
+static struct omap_udc *udc;
+
+static void omap_udc_enable_clock(int enable)
+{
+	if (udc == NULL || udc->dc_clk == NULL || udc->hhc_clk == NULL)
+		return;
+
+	if (enable) {
+		clk_enable(udc->dc_clk);
+		clk_enable(udc->hhc_clk);
+		udelay(100);
+	} else {
+		clk_disable(udc->hhc_clk);
+		clk_disable(udc->dc_clk);
+	}
+}
+
+/*
+ * Called by whatever detects VBUS sessions:  external transceiver
+ * driver, or maybe GPIO0 VBUS IRQ.  May request 48 MHz clock.
+ */
+static int omap_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct omap_udc	*udc;
+	unsigned long	flags;
+	u32 l;
+
+	udc = container_of(gadget, struct omap_udc, gadget);
+	spin_lock_irqsave(&udc->lock, flags);
+	VDBG("VBUS %s\n", is_active ? "on" : "off");
+	udc->vbus_active = (is_active != 0);
+	if (cpu_is_omap15xx()) {
+		/* "software" detect, ignored if !VBUS_MODE_1510 */
+		l = omap_readl(FUNC_MUX_CTRL_0);
+		if (is_active)
+			l |= VBUS_CTRL_1510;
+		else
+			l &= ~VBUS_CTRL_1510;
+		omap_writel(l, FUNC_MUX_CTRL_0);
+	}
+	if (udc->dc_clk != NULL && is_active) {
+		if (!udc->clk_requested) {
+			omap_udc_enable_clock(1);
+			udc->clk_requested = 1;
+		}
+	}
+	if (can_pullup(udc))
+		pullup_enable(udc);
+	else
+		pullup_disable(udc);
+	if (udc->dc_clk != NULL && !is_active) {
+		if (udc->clk_requested) {
+			omap_udc_enable_clock(0);
+			udc->clk_requested = 0;
+		}
+	}
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+static int omap_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	struct omap_udc	*udc;
+
+	udc = container_of(gadget, struct omap_udc, gadget);
+	if (!IS_ERR_OR_NULL(udc->transceiver))
+		return usb_phy_set_power(udc->transceiver, mA);
+	return -EOPNOTSUPP;
+}
+
+static int omap_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct omap_udc	*udc;
+	unsigned long	flags;
+
+	udc = container_of(gadget, struct omap_udc, gadget);
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->softconnect = (is_on != 0);
+	if (can_pullup(udc))
+		pullup_enable(udc);
+	else
+		pullup_disable(udc);
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+static int omap_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+static int omap_udc_stop(struct usb_gadget *g);
+
+static const struct usb_gadget_ops omap_gadget_ops = {
+	.get_frame		= omap_get_frame,
+	.wakeup			= omap_wakeup,
+	.set_selfpowered	= omap_set_selfpowered,
+	.vbus_session		= omap_vbus_session,
+	.vbus_draw		= omap_vbus_draw,
+	.pullup			= omap_pullup,
+	.udc_start		= omap_udc_start,
+	.udc_stop		= omap_udc_stop,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* dequeue ALL requests; caller holds udc->lock */
+static void nuke(struct omap_ep *ep, int status)
+{
+	struct omap_req	*req;
+
+	ep->stopped = 1;
+
+	if (use_dma && ep->dma_channel)
+		dma_channel_release(ep);
+
+	use_ep(ep, 0);
+	omap_writew(UDC_CLR_EP, UDC_CTRL);
+	if (ep->bEndpointAddress && ep->bmAttributes != USB_ENDPOINT_XFER_ISOC)
+		omap_writew(UDC_SET_HALT, UDC_CTRL);
+
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct omap_req, queue);
+		done(ep, req, status);
+	}
+}
+
+/* caller holds udc->lock */
+static void udc_quiesce(struct omap_udc *udc)
+{
+	struct omap_ep	*ep;
+
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	nuke(&udc->ep[0], -ESHUTDOWN);
+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list)
+		nuke(ep, -ESHUTDOWN);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void update_otg(struct omap_udc *udc)
+{
+	u16	devstat;
+
+	if (!gadget_is_otg(&udc->gadget))
+		return;
+
+	if (omap_readl(OTG_CTRL) & OTG_ID)
+		devstat = omap_readw(UDC_DEVSTAT);
+	else
+		devstat = 0;
+
+	udc->gadget.b_hnp_enable = !!(devstat & UDC_B_HNP_ENABLE);
+	udc->gadget.a_hnp_support = !!(devstat & UDC_A_HNP_SUPPORT);
+	udc->gadget.a_alt_hnp_support = !!(devstat & UDC_A_ALT_HNP_SUPPORT);
+
+	/* Enable HNP early, avoiding races on suspend irq path.
+	 * ASSUMES OTG state machine B_BUS_REQ input is true.
+	 */
+	if (udc->gadget.b_hnp_enable) {
+		u32 l;
+
+		l = omap_readl(OTG_CTRL);
+		l |= OTG_B_HNPEN | OTG_B_BUSREQ;
+		l &= ~OTG_PULLUP;
+		omap_writel(l, OTG_CTRL);
+	}
+}
+
+static void ep0_irq(struct omap_udc *udc, u16 irq_src)
+{
+	struct omap_ep	*ep0 = &udc->ep[0];
+	struct omap_req	*req = NULL;
+
+	ep0->irqs++;
+
+	/* Clear any pending requests and then scrub any rx/tx state
+	 * before starting to handle the SETUP request.
+	 */
+	if (irq_src & UDC_SETUP) {
+		u16	ack = irq_src & (UDC_EP0_TX|UDC_EP0_RX);
+
+		nuke(ep0, 0);
+		if (ack) {
+			omap_writew(ack, UDC_IRQ_SRC);
+			irq_src = UDC_SETUP;
+		}
+	}
+
+	/* IN/OUT packets mean we're in the DATA or STATUS stage.
+	 * This driver uses only uses protocol stalls (ep0 never halts),
+	 * and if we got this far the gadget driver already had a
+	 * chance to stall.  Tries to be forgiving of host oddities.
+	 *
+	 * NOTE:  the last chance gadget drivers have to stall control
+	 * requests is during their request completion callback.
+	 */
+	if (!list_empty(&ep0->queue))
+		req = container_of(ep0->queue.next, struct omap_req, queue);
+
+	/* IN == TX to host */
+	if (irq_src & UDC_EP0_TX) {
+		int	stat;
+
+		omap_writew(UDC_EP0_TX, UDC_IRQ_SRC);
+		omap_writew(UDC_EP_SEL|UDC_EP_DIR, UDC_EP_NUM);
+		stat = omap_readw(UDC_STAT_FLG);
+		if (stat & UDC_ACK) {
+			if (udc->ep0_in) {
+				/* write next IN packet from response,
+				 * or set up the status stage.
+				 */
+				if (req)
+					stat = write_fifo(ep0, req);
+				omap_writew(UDC_EP_DIR, UDC_EP_NUM);
+				if (!req && udc->ep0_pending) {
+					omap_writew(UDC_EP_SEL, UDC_EP_NUM);
+					omap_writew(UDC_CLR_EP, UDC_CTRL);
+					omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+					omap_writew(0, UDC_EP_NUM);
+					udc->ep0_pending = 0;
+				} /* else:  6 wait states before it'll tx */
+			} else {
+				/* ack status stage of OUT transfer */
+				omap_writew(UDC_EP_DIR, UDC_EP_NUM);
+				if (req)
+					done(ep0, req, 0);
+			}
+			req = NULL;
+		} else if (stat & UDC_STALL) {
+			omap_writew(UDC_CLR_HALT, UDC_CTRL);
+			omap_writew(UDC_EP_DIR, UDC_EP_NUM);
+		} else {
+			omap_writew(UDC_EP_DIR, UDC_EP_NUM);
+		}
+	}
+
+	/* OUT == RX from host */
+	if (irq_src & UDC_EP0_RX) {
+		int	stat;
+
+		omap_writew(UDC_EP0_RX, UDC_IRQ_SRC);
+		omap_writew(UDC_EP_SEL, UDC_EP_NUM);
+		stat = omap_readw(UDC_STAT_FLG);
+		if (stat & UDC_ACK) {
+			if (!udc->ep0_in) {
+				stat = 0;
+				/* read next OUT packet of request, maybe
+				 * reactivating the fifo; stall on errors.
+				 */
+				stat = read_fifo(ep0, req);
+				if (!req || stat < 0) {
+					omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
+					udc->ep0_pending = 0;
+					stat = 0;
+				} else if (stat == 0)
+					omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+				omap_writew(0, UDC_EP_NUM);
+
+				/* activate status stage */
+				if (stat == 1) {
+					done(ep0, req, 0);
+					/* that may have STALLed ep0... */
+					omap_writew(UDC_EP_SEL | UDC_EP_DIR,
+							UDC_EP_NUM);
+					omap_writew(UDC_CLR_EP, UDC_CTRL);
+					omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+					omap_writew(UDC_EP_DIR, UDC_EP_NUM);
+					udc->ep0_pending = 0;
+				}
+			} else {
+				/* ack status stage of IN transfer */
+				omap_writew(0, UDC_EP_NUM);
+				if (req)
+					done(ep0, req, 0);
+			}
+		} else if (stat & UDC_STALL) {
+			omap_writew(UDC_CLR_HALT, UDC_CTRL);
+			omap_writew(0, UDC_EP_NUM);
+		} else {
+			omap_writew(0, UDC_EP_NUM);
+		}
+	}
+
+	/* SETUP starts all control transfers */
+	if (irq_src & UDC_SETUP) {
+		union u {
+			u16			word[4];
+			struct usb_ctrlrequest	r;
+		} u;
+		int			status = -EINVAL;
+		struct omap_ep		*ep;
+
+		/* read the (latest) SETUP message */
+		do {
+			omap_writew(UDC_SETUP_SEL, UDC_EP_NUM);
+			/* two bytes at a time */
+			u.word[0] = omap_readw(UDC_DATA);
+			u.word[1] = omap_readw(UDC_DATA);
+			u.word[2] = omap_readw(UDC_DATA);
+			u.word[3] = omap_readw(UDC_DATA);
+			omap_writew(0, UDC_EP_NUM);
+		} while (omap_readw(UDC_IRQ_SRC) & UDC_SETUP);
+
+#define	w_value		le16_to_cpu(u.r.wValue)
+#define	w_index		le16_to_cpu(u.r.wIndex)
+#define	w_length	le16_to_cpu(u.r.wLength)
+
+		/* Delegate almost all control requests to the gadget driver,
+		 * except for a handful of ch9 status/feature requests that
+		 * hardware doesn't autodecode _and_ the gadget API hides.
+		 */
+		udc->ep0_in = (u.r.bRequestType & USB_DIR_IN) != 0;
+		udc->ep0_set_config = 0;
+		udc->ep0_pending = 1;
+		ep0->stopped = 0;
+		ep0->ackwait = 0;
+		switch (u.r.bRequest) {
+		case USB_REQ_SET_CONFIGURATION:
+			/* udc needs to know when ep != 0 is valid */
+			if (u.r.bRequestType != USB_RECIP_DEVICE)
+				goto delegate;
+			if (w_length != 0)
+				goto do_stall;
+			udc->ep0_set_config = 1;
+			udc->ep0_reset_config = (w_value == 0);
+			VDBG("set config %d\n", w_value);
+
+			/* update udc NOW since gadget driver may start
+			 * queueing requests immediately; clear config
+			 * later if it fails the request.
+			 */
+			if (udc->ep0_reset_config)
+				omap_writew(UDC_CLR_CFG, UDC_SYSCON2);
+			else
+				omap_writew(UDC_DEV_CFG, UDC_SYSCON2);
+			update_otg(udc);
+			goto delegate;
+		case USB_REQ_CLEAR_FEATURE:
+			/* clear endpoint halt */
+			if (u.r.bRequestType != USB_RECIP_ENDPOINT)
+				goto delegate;
+			if (w_value != USB_ENDPOINT_HALT
+					|| w_length != 0)
+				goto do_stall;
+			ep = &udc->ep[w_index & 0xf];
+			if (ep != ep0) {
+				if (w_index & USB_DIR_IN)
+					ep += 16;
+				if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
+						|| !ep->ep.desc)
+					goto do_stall;
+				use_ep(ep, 0);
+				omap_writew(udc->clr_halt, UDC_CTRL);
+				ep->ackwait = 0;
+				if (!(ep->bEndpointAddress & USB_DIR_IN)) {
+					omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+					ep->ackwait = 1 + ep->double_buf;
+				}
+				/* NOTE:  assumes the host behaves sanely,
+				 * only clearing real halts.  Else we may
+				 * need to kill pending transfers and then
+				 * restart the queue... very messy for DMA!
+				 */
+			}
+			VDBG("%s halt cleared by host\n", ep->name);
+			goto ep0out_status_stage;
+		case USB_REQ_SET_FEATURE:
+			/* set endpoint halt */
+			if (u.r.bRequestType != USB_RECIP_ENDPOINT)
+				goto delegate;
+			if (w_value != USB_ENDPOINT_HALT
+					|| w_length != 0)
+				goto do_stall;
+			ep = &udc->ep[w_index & 0xf];
+			if (w_index & USB_DIR_IN)
+				ep += 16;
+			if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
+					|| ep == ep0 || !ep->ep.desc)
+				goto do_stall;
+			if (use_dma && ep->has_dma) {
+				/* this has rude side-effects (aborts) and
+				 * can't really work if DMA-IN is active
+				 */
+				DBG("%s host set_halt, NYET\n", ep->name);
+				goto do_stall;
+			}
+			use_ep(ep, 0);
+			/* can't halt if fifo isn't empty... */
+			omap_writew(UDC_CLR_EP, UDC_CTRL);
+			omap_writew(UDC_SET_HALT, UDC_CTRL);
+			VDBG("%s halted by host\n", ep->name);
+ep0out_status_stage:
+			status = 0;
+			omap_writew(UDC_EP_SEL|UDC_EP_DIR, UDC_EP_NUM);
+			omap_writew(UDC_CLR_EP, UDC_CTRL);
+			omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+			omap_writew(UDC_EP_DIR, UDC_EP_NUM);
+			udc->ep0_pending = 0;
+			break;
+		case USB_REQ_GET_STATUS:
+			/* USB_ENDPOINT_HALT status? */
+			if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT))
+				goto intf_status;
+
+			/* ep0 never stalls */
+			if (!(w_index & 0xf))
+				goto zero_status;
+
+			/* only active endpoints count */
+			ep = &udc->ep[w_index & 0xf];
+			if (w_index & USB_DIR_IN)
+				ep += 16;
+			if (!ep->ep.desc)
+				goto do_stall;
+
+			/* iso never stalls */
+			if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
+				goto zero_status;
+
+			/* FIXME don't assume non-halted endpoints!! */
+			ERR("%s status, can't report\n", ep->ep.name);
+			goto do_stall;
+
+intf_status:
+			/* return interface status.  if we were pedantic,
+			 * we'd detect non-existent interfaces, and stall.
+			 */
+			if (u.r.bRequestType
+					!= (USB_DIR_IN|USB_RECIP_INTERFACE))
+				goto delegate;
+
+zero_status:
+			/* return two zero bytes */
+			omap_writew(UDC_EP_SEL|UDC_EP_DIR, UDC_EP_NUM);
+			omap_writew(0, UDC_DATA);
+			omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+			omap_writew(UDC_EP_DIR, UDC_EP_NUM);
+			status = 0;
+			VDBG("GET_STATUS, interface %d\n", w_index);
+			/* next, status stage */
+			break;
+		default:
+delegate:
+			/* activate the ep0out fifo right away */
+			if (!udc->ep0_in && w_length) {
+				omap_writew(0, UDC_EP_NUM);
+				omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+			}
+
+			/* gadget drivers see class/vendor specific requests,
+			 * {SET,GET}_{INTERFACE,DESCRIPTOR,CONFIGURATION},
+			 * and more
+			 */
+			VDBG("SETUP %02x.%02x v%04x i%04x l%04x\n",
+				u.r.bRequestType, u.r.bRequest,
+				w_value, w_index, w_length);
+
+#undef	w_value
+#undef	w_index
+#undef	w_length
+
+			/* The gadget driver may return an error here,
+			 * causing an immediate protocol stall.
+			 *
+			 * Else it must issue a response, either queueing a
+			 * response buffer for the DATA stage, or halting ep0
+			 * (causing a protocol stall, not a real halt).  A
+			 * zero length buffer means no DATA stage.
+			 *
+			 * It's fine to issue that response after the setup()
+			 * call returns, and this IRQ was handled.
+			 */
+			udc->ep0_setup = 1;
+			spin_unlock(&udc->lock);
+			status = udc->driver->setup(&udc->gadget, &u.r);
+			spin_lock(&udc->lock);
+			udc->ep0_setup = 0;
+		}
+
+		if (status < 0) {
+do_stall:
+			VDBG("req %02x.%02x protocol STALL; stat %d\n",
+					u.r.bRequestType, u.r.bRequest, status);
+			if (udc->ep0_set_config) {
+				if (udc->ep0_reset_config)
+					WARNING("error resetting config?\n");
+				else
+					omap_writew(UDC_CLR_CFG, UDC_SYSCON2);
+			}
+			omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
+			udc->ep0_pending = 0;
+		}
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define OTG_FLAGS (UDC_B_HNP_ENABLE|UDC_A_HNP_SUPPORT|UDC_A_ALT_HNP_SUPPORT)
+
+static void devstate_irq(struct omap_udc *udc, u16 irq_src)
+{
+	u16	devstat, change;
+
+	devstat = omap_readw(UDC_DEVSTAT);
+	change = devstat ^ udc->devstat;
+	udc->devstat = devstat;
+
+	if (change & (UDC_USB_RESET|UDC_ATT)) {
+		udc_quiesce(udc);
+
+		if (change & UDC_ATT) {
+			/* driver for any external transceiver will
+			 * have called omap_vbus_session() already
+			 */
+			if (devstat & UDC_ATT) {
+				udc->gadget.speed = USB_SPEED_FULL;
+				VDBG("connect\n");
+				if (IS_ERR_OR_NULL(udc->transceiver))
+					pullup_enable(udc);
+				/* if (driver->connect) call it */
+			} else if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
+				udc->gadget.speed = USB_SPEED_UNKNOWN;
+				if (IS_ERR_OR_NULL(udc->transceiver))
+					pullup_disable(udc);
+				DBG("disconnect, gadget %s\n",
+					udc->driver->driver.name);
+				if (udc->driver->disconnect) {
+					spin_unlock(&udc->lock);
+					udc->driver->disconnect(&udc->gadget);
+					spin_lock(&udc->lock);
+				}
+			}
+			change &= ~UDC_ATT;
+		}
+
+		if (change & UDC_USB_RESET) {
+			if (devstat & UDC_USB_RESET) {
+				VDBG("RESET=1\n");
+			} else {
+				udc->gadget.speed = USB_SPEED_FULL;
+				INFO("USB reset done, gadget %s\n",
+					udc->driver->driver.name);
+				/* ep0 traffic is legal from now on */
+				omap_writew(UDC_DS_CHG_IE | UDC_EP0_IE,
+						UDC_IRQ_EN);
+			}
+			change &= ~UDC_USB_RESET;
+		}
+	}
+	if (change & UDC_SUS) {
+		if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
+			/* FIXME tell isp1301 to suspend/resume (?) */
+			if (devstat & UDC_SUS) {
+				VDBG("suspend\n");
+				update_otg(udc);
+				/* HNP could be under way already */
+				if (udc->gadget.speed == USB_SPEED_FULL
+						&& udc->driver->suspend) {
+					spin_unlock(&udc->lock);
+					udc->driver->suspend(&udc->gadget);
+					spin_lock(&udc->lock);
+				}
+				if (!IS_ERR_OR_NULL(udc->transceiver))
+					usb_phy_set_suspend(
+							udc->transceiver, 1);
+			} else {
+				VDBG("resume\n");
+				if (!IS_ERR_OR_NULL(udc->transceiver))
+					usb_phy_set_suspend(
+							udc->transceiver, 0);
+				if (udc->gadget.speed == USB_SPEED_FULL
+						&& udc->driver->resume) {
+					spin_unlock(&udc->lock);
+					udc->driver->resume(&udc->gadget);
+					spin_lock(&udc->lock);
+				}
+			}
+		}
+		change &= ~UDC_SUS;
+	}
+	if (!cpu_is_omap15xx() && (change & OTG_FLAGS)) {
+		update_otg(udc);
+		change &= ~OTG_FLAGS;
+	}
+
+	change &= ~(UDC_CFG|UDC_DEF|UDC_ADD);
+	if (change)
+		VDBG("devstat %03x, ignore change %03x\n",
+			devstat,  change);
+
+	omap_writew(UDC_DS_CHG, UDC_IRQ_SRC);
+}
+
+static irqreturn_t omap_udc_irq(int irq, void *_udc)
+{
+	struct omap_udc	*udc = _udc;
+	u16		irq_src;
+	irqreturn_t	status = IRQ_NONE;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	irq_src = omap_readw(UDC_IRQ_SRC);
+
+	/* Device state change (usb ch9 stuff) */
+	if (irq_src & UDC_DS_CHG) {
+		devstate_irq(_udc, irq_src);
+		status = IRQ_HANDLED;
+		irq_src &= ~UDC_DS_CHG;
+	}
+
+	/* EP0 control transfers */
+	if (irq_src & (UDC_EP0_RX|UDC_SETUP|UDC_EP0_TX)) {
+		ep0_irq(_udc, irq_src);
+		status = IRQ_HANDLED;
+		irq_src &= ~(UDC_EP0_RX|UDC_SETUP|UDC_EP0_TX);
+	}
+
+	/* DMA transfer completion */
+	if (use_dma && (irq_src & (UDC_TXN_DONE|UDC_RXN_CNT|UDC_RXN_EOT))) {
+		dma_irq(_udc, irq_src);
+		status = IRQ_HANDLED;
+		irq_src &= ~(UDC_TXN_DONE|UDC_RXN_CNT|UDC_RXN_EOT);
+	}
+
+	irq_src &= ~(UDC_IRQ_SOF | UDC_EPN_TX|UDC_EPN_RX);
+	if (irq_src)
+		DBG("udc_irq, unhandled %03x\n", irq_src);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return status;
+}
+
+/* workaround for seemingly-lost IRQs for RX ACKs... */
+#define PIO_OUT_TIMEOUT	(jiffies + HZ/3)
+#define HALF_FULL(f)	(!((f)&(UDC_NON_ISO_FIFO_FULL|UDC_NON_ISO_FIFO_EMPTY)))
+
+static void pio_out_timer(struct timer_list *t)
+{
+	struct omap_ep	*ep = from_timer(ep, t, timer);
+	unsigned long	flags;
+	u16		stat_flg;
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+	if (!list_empty(&ep->queue) && ep->ackwait) {
+		use_ep(ep, UDC_EP_SEL);
+		stat_flg = omap_readw(UDC_STAT_FLG);
+
+		if ((stat_flg & UDC_ACK) && (!(stat_flg & UDC_FIFO_EN)
+				|| (ep->double_buf && HALF_FULL(stat_flg)))) {
+			struct omap_req	*req;
+
+			VDBG("%s: lose, %04x\n", ep->ep.name, stat_flg);
+			req = container_of(ep->queue.next,
+					struct omap_req, queue);
+			(void) read_fifo(ep, req);
+			omap_writew(ep->bEndpointAddress, UDC_EP_NUM);
+			omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+			ep->ackwait = 1 + ep->double_buf;
+		} else
+			deselect_ep();
+	}
+	mod_timer(&ep->timer, PIO_OUT_TIMEOUT);
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+}
+
+static irqreturn_t omap_udc_pio_irq(int irq, void *_dev)
+{
+	u16		epn_stat, irq_src;
+	irqreturn_t	status = IRQ_NONE;
+	struct omap_ep	*ep;
+	int		epnum;
+	struct omap_udc	*udc = _dev;
+	struct omap_req	*req;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	epn_stat = omap_readw(UDC_EPN_STAT);
+	irq_src = omap_readw(UDC_IRQ_SRC);
+
+	/* handle OUT first, to avoid some wasteful NAKs */
+	if (irq_src & UDC_EPN_RX) {
+		epnum = (epn_stat >> 8) & 0x0f;
+		omap_writew(UDC_EPN_RX, UDC_IRQ_SRC);
+		status = IRQ_HANDLED;
+		ep = &udc->ep[epnum];
+		ep->irqs++;
+
+		omap_writew(epnum | UDC_EP_SEL, UDC_EP_NUM);
+		ep->fnf = 0;
+		if (omap_readw(UDC_STAT_FLG) & UDC_ACK) {
+			ep->ackwait--;
+			if (!list_empty(&ep->queue)) {
+				int stat;
+				req = container_of(ep->queue.next,
+						struct omap_req, queue);
+				stat = read_fifo(ep, req);
+				if (!ep->double_buf)
+					ep->fnf = 1;
+			}
+		}
+		/* min 6 clock delay before clearing EP_SEL ... */
+		epn_stat = omap_readw(UDC_EPN_STAT);
+		epn_stat = omap_readw(UDC_EPN_STAT);
+		omap_writew(epnum, UDC_EP_NUM);
+
+		/* enabling fifo _after_ clearing ACK, contrary to docs,
+		 * reduces lossage; timer still needed though (sigh).
+		 */
+		if (ep->fnf) {
+			omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
+			ep->ackwait = 1 + ep->double_buf;
+		}
+		mod_timer(&ep->timer, PIO_OUT_TIMEOUT);
+	}
+
+	/* then IN transfers */
+	else if (irq_src & UDC_EPN_TX) {
+		epnum = epn_stat & 0x0f;
+		omap_writew(UDC_EPN_TX, UDC_IRQ_SRC);
+		status = IRQ_HANDLED;
+		ep = &udc->ep[16 + epnum];
+		ep->irqs++;
+
+		omap_writew(epnum | UDC_EP_DIR | UDC_EP_SEL, UDC_EP_NUM);
+		if (omap_readw(UDC_STAT_FLG) & UDC_ACK) {
+			ep->ackwait = 0;
+			if (!list_empty(&ep->queue)) {
+				req = container_of(ep->queue.next,
+						struct omap_req, queue);
+				(void) write_fifo(ep, req);
+			}
+		}
+		/* min 6 clock delay before clearing EP_SEL ... */
+		epn_stat = omap_readw(UDC_EPN_STAT);
+		epn_stat = omap_readw(UDC_EPN_STAT);
+		omap_writew(epnum | UDC_EP_DIR, UDC_EP_NUM);
+		/* then 6 clocks before it'd tx */
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return status;
+}
+
+#ifdef	USE_ISO
+static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
+{
+	struct omap_udc	*udc = _dev;
+	struct omap_ep	*ep;
+	int		pending = 0;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* handle all non-DMA ISO transfers */
+	list_for_each_entry(ep, &udc->iso, iso) {
+		u16		stat;
+		struct omap_req	*req;
+
+		if (ep->has_dma || list_empty(&ep->queue))
+			continue;
+		req = list_entry(ep->queue.next, struct omap_req, queue);
+
+		use_ep(ep, UDC_EP_SEL);
+		stat = omap_readw(UDC_STAT_FLG);
+
+		/* NOTE: like the other controller drivers, this isn't
+		 * currently reporting lost or damaged frames.
+		 */
+		if (ep->bEndpointAddress & USB_DIR_IN) {
+			if (stat & UDC_MISS_IN)
+				/* done(ep, req, -EPROTO) */;
+			else
+				write_fifo(ep, req);
+		} else {
+			int	status = 0;
+
+			if (stat & UDC_NO_RXPACKET)
+				status = -EREMOTEIO;
+			else if (stat & UDC_ISO_ERR)
+				status = -EILSEQ;
+			else if (stat & UDC_DATA_FLUSH)
+				status = -ENOSR;
+
+			if (status)
+				/* done(ep, req, status) */;
+			else
+				read_fifo(ep, req);
+		}
+		deselect_ep();
+		/* 6 wait states before next EP */
+
+		ep->irqs++;
+		if (!list_empty(&ep->queue))
+			pending = 1;
+	}
+	if (!pending) {
+		u16 w;
+
+		w = omap_readw(UDC_IRQ_EN);
+		w &= ~UDC_SOF_IE;
+		omap_writew(w, UDC_IRQ_EN);
+	}
+	omap_writew(UDC_IRQ_SOF, UDC_IRQ_SRC);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return IRQ_HANDLED;
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static inline int machine_without_vbus_sense(void)
+{
+	return machine_is_omap_innovator()
+		|| machine_is_omap_osk()
+		|| machine_is_omap_palmte()
+		|| machine_is_sx1()
+		/* No known omap7xx boards with vbus sense */
+		|| cpu_is_omap7xx();
+}
+
+static int omap_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	int		status;
+	struct omap_ep	*ep;
+	unsigned long	flags;
+
+
+	spin_lock_irqsave(&udc->lock, flags);
+	/* reset state */
+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
+		ep->irqs = 0;
+		if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
+			continue;
+		use_ep(ep, 0);
+		omap_writew(UDC_SET_HALT, UDC_CTRL);
+	}
+	udc->ep0_pending = 0;
+	udc->ep[0].irqs = 0;
+	udc->softconnect = 1;
+
+	/* hook up the driver */
+	udc->driver = driver;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (udc->dc_clk != NULL)
+		omap_udc_enable_clock(1);
+
+	omap_writew(UDC_IRQ_SRC_MASK, UDC_IRQ_SRC);
+
+	/* connect to bus through transceiver */
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
+		status = otg_set_peripheral(udc->transceiver->otg,
+						&udc->gadget);
+		if (status < 0) {
+			ERR("can't bind to transceiver\n");
+			udc->driver = NULL;
+			goto done;
+		}
+	} else {
+		status = 0;
+		if (can_pullup(udc))
+			pullup_enable(udc);
+		else
+			pullup_disable(udc);
+	}
+
+	/* boards that don't have VBUS sensing can't autogate 48MHz;
+	 * can't enter deep sleep while a gadget driver is active.
+	 */
+	if (machine_without_vbus_sense())
+		omap_vbus_session(&udc->gadget, 1);
+
+done:
+	if (udc->dc_clk != NULL)
+		omap_udc_enable_clock(0);
+
+	return status;
+}
+
+static int omap_udc_stop(struct usb_gadget *g)
+{
+	unsigned long	flags;
+
+	if (udc->dc_clk != NULL)
+		omap_udc_enable_clock(1);
+
+	if (machine_without_vbus_sense())
+		omap_vbus_session(&udc->gadget, 0);
+
+	if (!IS_ERR_OR_NULL(udc->transceiver))
+		(void) otg_set_peripheral(udc->transceiver->otg, NULL);
+	else
+		pullup_disable(udc);
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc_quiesce(udc);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	udc->driver = NULL;
+
+	if (udc->dc_clk != NULL)
+		omap_udc_enable_clock(0);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+#include <linux/seq_file.h>
+
+static const char proc_filename[] = "driver/udc";
+
+#define FOURBITS "%s%s%s%s"
+#define EIGHTBITS "%s%s%s%s%s%s%s%s"
+
+static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
+{
+	u16		stat_flg;
+	struct omap_req	*req;
+	char		buf[20];
+
+	use_ep(ep, 0);
+
+	if (use_dma && ep->has_dma)
+		snprintf(buf, sizeof buf, "(%cxdma%d lch%d) ",
+			(ep->bEndpointAddress & USB_DIR_IN) ? 't' : 'r',
+			ep->dma_channel - 1, ep->lch);
+	else
+		buf[0] = 0;
+
+	stat_flg = omap_readw(UDC_STAT_FLG);
+	seq_printf(s,
+		"\n%s %s%s%sirqs %ld stat %04x " EIGHTBITS FOURBITS "%s\n",
+		ep->name, buf,
+		ep->double_buf ? "dbuf " : "",
+		({ char *s;
+		switch (ep->ackwait) {
+		case 0:
+			s = "";
+			break;
+		case 1:
+			s = "(ackw) ";
+			break;
+		case 2:
+			s = "(ackw2) ";
+			break;
+		default:
+			s = "(?) ";
+			break;
+		} s; }),
+		ep->irqs, stat_flg,
+		(stat_flg & UDC_NO_RXPACKET) ? "no_rxpacket " : "",
+		(stat_flg & UDC_MISS_IN) ? "miss_in " : "",
+		(stat_flg & UDC_DATA_FLUSH) ? "data_flush " : "",
+		(stat_flg & UDC_ISO_ERR) ? "iso_err " : "",
+		(stat_flg & UDC_ISO_FIFO_EMPTY) ? "iso_fifo_empty " : "",
+		(stat_flg & UDC_ISO_FIFO_FULL) ? "iso_fifo_full " : "",
+		(stat_flg & UDC_EP_HALTED) ? "HALT " : "",
+		(stat_flg & UDC_STALL) ? "STALL " : "",
+		(stat_flg & UDC_NAK) ? "NAK " : "",
+		(stat_flg & UDC_ACK) ? "ACK " : "",
+		(stat_flg & UDC_FIFO_EN) ? "fifo_en " : "",
+		(stat_flg & UDC_NON_ISO_FIFO_EMPTY) ? "fifo_empty " : "",
+		(stat_flg & UDC_NON_ISO_FIFO_FULL) ? "fifo_full " : "");
+
+	if (list_empty(&ep->queue))
+		seq_printf(s, "\t(queue empty)\n");
+	else
+		list_for_each_entry(req, &ep->queue, queue) {
+			unsigned	length = req->req.actual;
+
+			if (use_dma && buf[0]) {
+				length += ((ep->bEndpointAddress & USB_DIR_IN)
+						? dma_src_len : dma_dest_len)
+					(ep, req->req.dma + length);
+				buf[0] = 0;
+			}
+			seq_printf(s, "\treq %p len %d/%d buf %p\n",
+					&req->req, length,
+					req->req.length, req->req.buf);
+		}
+}
+
+static char *trx_mode(unsigned m, int enabled)
+{
+	switch (m) {
+	case 0:
+		return enabled ? "*6wire" : "unused";
+	case 1:
+		return "4wire";
+	case 2:
+		return "3wire";
+	case 3:
+		return "6wire";
+	default:
+		return "unknown";
+	}
+}
+
+static int proc_otg_show(struct seq_file *s)
+{
+	u32		tmp;
+	u32		trans = 0;
+	char		*ctrl_name = "(UNKNOWN)";
+
+	tmp = omap_readl(OTG_REV);
+	ctrl_name = "transceiver_ctrl";
+	trans = omap_readw(USB_TRANSCEIVER_CTRL);
+	seq_printf(s, "\nOTG rev %d.%d, %s %05x\n",
+		tmp >> 4, tmp & 0xf, ctrl_name, trans);
+	tmp = omap_readw(OTG_SYSCON_1);
+	seq_printf(s, "otg_syscon1 %08x usb2 %s, usb1 %s, usb0 %s,"
+			FOURBITS "\n", tmp,
+		trx_mode(USB2_TRX_MODE(tmp), trans & CONF_USB2_UNI_R),
+		trx_mode(USB1_TRX_MODE(tmp), trans & CONF_USB1_UNI_R),
+		(USB0_TRX_MODE(tmp) == 0 && !cpu_is_omap1710())
+			? "internal"
+			: trx_mode(USB0_TRX_MODE(tmp), 1),
+		(tmp & OTG_IDLE_EN) ? " !otg" : "",
+		(tmp & HST_IDLE_EN) ? " !host" : "",
+		(tmp & DEV_IDLE_EN) ? " !dev" : "",
+		(tmp & OTG_RESET_DONE) ? " reset_done" : " reset_active");
+	tmp = omap_readl(OTG_SYSCON_2);
+	seq_printf(s, "otg_syscon2 %08x%s" EIGHTBITS
+			" b_ase_brst=%d hmc=%d\n", tmp,
+		(tmp & OTG_EN) ? " otg_en" : "",
+		(tmp & USBX_SYNCHRO) ? " synchro" : "",
+		/* much more SRP stuff */
+		(tmp & SRP_DATA) ? " srp_data" : "",
+		(tmp & SRP_VBUS) ? " srp_vbus" : "",
+		(tmp & OTG_PADEN) ? " otg_paden" : "",
+		(tmp & HMC_PADEN) ? " hmc_paden" : "",
+		(tmp & UHOST_EN) ? " uhost_en" : "",
+		(tmp & HMC_TLLSPEED) ? " tllspeed" : "",
+		(tmp & HMC_TLLATTACH) ? " tllattach" : "",
+		B_ASE_BRST(tmp),
+		OTG_HMC(tmp));
+	tmp = omap_readl(OTG_CTRL);
+	seq_printf(s, "otg_ctrl    %06x" EIGHTBITS EIGHTBITS "%s\n", tmp,
+		(tmp & OTG_ASESSVLD) ? " asess" : "",
+		(tmp & OTG_BSESSEND) ? " bsess_end" : "",
+		(tmp & OTG_BSESSVLD) ? " bsess" : "",
+		(tmp & OTG_VBUSVLD) ? " vbus" : "",
+		(tmp & OTG_ID) ? " id" : "",
+		(tmp & OTG_DRIVER_SEL) ? " DEVICE" : " HOST",
+		(tmp & OTG_A_SETB_HNPEN) ? " a_setb_hnpen" : "",
+		(tmp & OTG_A_BUSREQ) ? " a_bus" : "",
+		(tmp & OTG_B_HNPEN) ? " b_hnpen" : "",
+		(tmp & OTG_B_BUSREQ) ? " b_bus" : "",
+		(tmp & OTG_BUSDROP) ? " busdrop" : "",
+		(tmp & OTG_PULLDOWN) ? " down" : "",
+		(tmp & OTG_PULLUP) ? " up" : "",
+		(tmp & OTG_DRV_VBUS) ? " drv" : "",
+		(tmp & OTG_PD_VBUS) ? " pd_vb" : "",
+		(tmp & OTG_PU_VBUS) ? " pu_vb" : "",
+		(tmp & OTG_PU_ID) ? " pu_id" : ""
+		);
+	tmp = omap_readw(OTG_IRQ_EN);
+	seq_printf(s, "otg_irq_en  %04x" "\n", tmp);
+	tmp = omap_readw(OTG_IRQ_SRC);
+	seq_printf(s, "otg_irq_src %04x" "\n", tmp);
+	tmp = omap_readw(OTG_OUTCTRL);
+	seq_printf(s, "otg_outctrl %04x" "\n", tmp);
+	tmp = omap_readw(OTG_TEST);
+	seq_printf(s, "otg_test    %04x" "\n", tmp);
+	return 0;
+}
+
+static int proc_udc_show(struct seq_file *s, void *_)
+{
+	u32		tmp;
+	struct omap_ep	*ep;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	seq_printf(s, "%s, version: " DRIVER_VERSION
+#ifdef	USE_ISO
+		" (iso)"
+#endif
+		"%s\n",
+		driver_desc,
+		use_dma ?  " (dma)" : "");
+
+	tmp = omap_readw(UDC_REV) & 0xff;
+	seq_printf(s,
+		"UDC rev %d.%d, fifo mode %d, gadget %s\n"
+		"hmc %d, transceiver %s\n",
+		tmp >> 4, tmp & 0xf,
+		fifo_mode,
+		udc->driver ? udc->driver->driver.name : "(none)",
+		HMC,
+		udc->transceiver
+			? udc->transceiver->label
+			: (cpu_is_omap1710()
+				? "external" : "(none)"));
+	seq_printf(s, "ULPD control %04x req %04x status %04x\n",
+		omap_readw(ULPD_CLOCK_CTRL),
+		omap_readw(ULPD_SOFT_REQ),
+		omap_readw(ULPD_STATUS_REQ));
+
+	/* OTG controller registers */
+	if (!cpu_is_omap15xx())
+		proc_otg_show(s);
+
+	tmp = omap_readw(UDC_SYSCON1);
+	seq_printf(s, "\nsyscon1     %04x" EIGHTBITS "\n", tmp,
+		(tmp & UDC_CFG_LOCK) ? " cfg_lock" : "",
+		(tmp & UDC_DATA_ENDIAN) ? " data_endian" : "",
+		(tmp & UDC_DMA_ENDIAN) ? " dma_endian" : "",
+		(tmp & UDC_NAK_EN) ? " nak" : "",
+		(tmp & UDC_AUTODECODE_DIS) ? " autodecode_dis" : "",
+		(tmp & UDC_SELF_PWR) ? " self_pwr" : "",
+		(tmp & UDC_SOFF_DIS) ? " soff_dis" : "",
+		(tmp & UDC_PULLUP_EN) ? " PULLUP" : "");
+	/* syscon2 is write-only */
+
+	/* UDC controller registers */
+	if (!(tmp & UDC_PULLUP_EN)) {
+		seq_printf(s, "(suspended)\n");
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return 0;
+	}
+
+	tmp = omap_readw(UDC_DEVSTAT);
+	seq_printf(s, "devstat     %04x" EIGHTBITS "%s%s\n", tmp,
+		(tmp & UDC_B_HNP_ENABLE) ? " b_hnp" : "",
+		(tmp & UDC_A_HNP_SUPPORT) ? " a_hnp" : "",
+		(tmp & UDC_A_ALT_HNP_SUPPORT) ? " a_alt_hnp" : "",
+		(tmp & UDC_R_WK_OK) ? " r_wk_ok" : "",
+		(tmp & UDC_USB_RESET) ? " usb_reset" : "",
+		(tmp & UDC_SUS) ? " SUS" : "",
+		(tmp & UDC_CFG) ? " CFG" : "",
+		(tmp & UDC_ADD) ? " ADD" : "",
+		(tmp & UDC_DEF) ? " DEF" : "",
+		(tmp & UDC_ATT) ? " ATT" : "");
+	seq_printf(s, "sof         %04x\n", omap_readw(UDC_SOF));
+	tmp = omap_readw(UDC_IRQ_EN);
+	seq_printf(s, "irq_en      %04x" FOURBITS "%s\n", tmp,
+		(tmp & UDC_SOF_IE) ? " sof" : "",
+		(tmp & UDC_EPN_RX_IE) ? " epn_rx" : "",
+		(tmp & UDC_EPN_TX_IE) ? " epn_tx" : "",
+		(tmp & UDC_DS_CHG_IE) ? " ds_chg" : "",
+		(tmp & UDC_EP0_IE) ? " ep0" : "");
+	tmp = omap_readw(UDC_IRQ_SRC);
+	seq_printf(s, "irq_src     %04x" EIGHTBITS "%s%s\n", tmp,
+		(tmp & UDC_TXN_DONE) ? " txn_done" : "",
+		(tmp & UDC_RXN_CNT) ? " rxn_cnt" : "",
+		(tmp & UDC_RXN_EOT) ? " rxn_eot" : "",
+		(tmp & UDC_IRQ_SOF) ? " sof" : "",
+		(tmp & UDC_EPN_RX) ? " epn_rx" : "",
+		(tmp & UDC_EPN_TX) ? " epn_tx" : "",
+		(tmp & UDC_DS_CHG) ? " ds_chg" : "",
+		(tmp & UDC_SETUP) ? " setup" : "",
+		(tmp & UDC_EP0_RX) ? " ep0out" : "",
+		(tmp & UDC_EP0_TX) ? " ep0in" : "");
+	if (use_dma) {
+		unsigned i;
+
+		tmp = omap_readw(UDC_DMA_IRQ_EN);
+		seq_printf(s, "dma_irq_en  %04x%s" EIGHTBITS "\n", tmp,
+			(tmp & UDC_TX_DONE_IE(3)) ? " tx2_done" : "",
+			(tmp & UDC_RX_CNT_IE(3)) ? " rx2_cnt" : "",
+			(tmp & UDC_RX_EOT_IE(3)) ? " rx2_eot" : "",
+
+			(tmp & UDC_TX_DONE_IE(2)) ? " tx1_done" : "",
+			(tmp & UDC_RX_CNT_IE(2)) ? " rx1_cnt" : "",
+			(tmp & UDC_RX_EOT_IE(2)) ? " rx1_eot" : "",
+
+			(tmp & UDC_TX_DONE_IE(1)) ? " tx0_done" : "",
+			(tmp & UDC_RX_CNT_IE(1)) ? " rx0_cnt" : "",
+			(tmp & UDC_RX_EOT_IE(1)) ? " rx0_eot" : "");
+
+		tmp = omap_readw(UDC_RXDMA_CFG);
+		seq_printf(s, "rxdma_cfg   %04x\n", tmp);
+		if (tmp) {
+			for (i = 0; i < 3; i++) {
+				if ((tmp & (0x0f << (i * 4))) == 0)
+					continue;
+				seq_printf(s, "rxdma[%d]    %04x\n", i,
+						omap_readw(UDC_RXDMA(i + 1)));
+			}
+		}
+		tmp = omap_readw(UDC_TXDMA_CFG);
+		seq_printf(s, "txdma_cfg   %04x\n", tmp);
+		if (tmp) {
+			for (i = 0; i < 3; i++) {
+				if (!(tmp & (0x0f << (i * 4))))
+					continue;
+				seq_printf(s, "txdma[%d]    %04x\n", i,
+						omap_readw(UDC_TXDMA(i + 1)));
+			}
+		}
+	}
+
+	tmp = omap_readw(UDC_DEVSTAT);
+	if (tmp & UDC_ATT) {
+		proc_ep_show(s, &udc->ep[0]);
+		if (tmp & UDC_ADD) {
+			list_for_each_entry(ep, &udc->gadget.ep_list,
+					ep.ep_list) {
+				if (ep->ep.desc)
+					proc_ep_show(s, ep);
+			}
+		}
+	}
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+static void create_proc_file(void)
+{
+	proc_create_single(proc_filename, 0, NULL, proc_udc_show);
+}
+
+static void remove_proc_file(void)
+{
+	remove_proc_entry(proc_filename, NULL);
+}
+
+#else
+
+static inline void create_proc_file(void) {}
+static inline void remove_proc_file(void) {}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* Before this controller can enumerate, we need to pick an endpoint
+ * configuration, or "fifo_mode"  That involves allocating 2KB of packet
+ * buffer space among the endpoints we'll be operating.
+ *
+ * NOTE: as of OMAP 1710 ES2.0, writing a new endpoint config when
+ * UDC_SYSCON_1.CFG_LOCK is set can now work.  We won't use that
+ * capability yet though.
+ */
+static unsigned
+omap_ep_setup(char *name, u8 addr, u8 type,
+		unsigned buf, unsigned maxp, int dbuf)
+{
+	struct omap_ep	*ep;
+	u16		epn_rxtx = 0;
+
+	/* OUT endpoints first, then IN */
+	ep = &udc->ep[addr & 0xf];
+	if (addr & USB_DIR_IN)
+		ep += 16;
+
+	/* in case of ep init table bugs */
+	BUG_ON(ep->name[0]);
+
+	/* chip setup ... bit values are same for IN, OUT */
+	if (type == USB_ENDPOINT_XFER_ISOC) {
+		switch (maxp) {
+		case 8:
+			epn_rxtx = 0 << 12;
+			break;
+		case 16:
+			epn_rxtx = 1 << 12;
+			break;
+		case 32:
+			epn_rxtx = 2 << 12;
+			break;
+		case 64:
+			epn_rxtx = 3 << 12;
+			break;
+		case 128:
+			epn_rxtx = 4 << 12;
+			break;
+		case 256:
+			epn_rxtx = 5 << 12;
+			break;
+		case 512:
+			epn_rxtx = 6 << 12;
+			break;
+		default:
+			BUG();
+		}
+		epn_rxtx |= UDC_EPN_RX_ISO;
+		dbuf = 1;
+	} else {
+		/* double-buffering "not supported" on 15xx,
+		 * and ignored for PIO-IN on newer chips
+		 * (for more reliable behavior)
+		 */
+		if (!use_dma || cpu_is_omap15xx())
+			dbuf = 0;
+
+		switch (maxp) {
+		case 8:
+			epn_rxtx = 0 << 12;
+			break;
+		case 16:
+			epn_rxtx = 1 << 12;
+			break;
+		case 32:
+			epn_rxtx = 2 << 12;
+			break;
+		case 64:
+			epn_rxtx = 3 << 12;
+			break;
+		default:
+			BUG();
+		}
+		if (dbuf && addr)
+			epn_rxtx |= UDC_EPN_RX_DB;
+		timer_setup(&ep->timer, pio_out_timer, 0);
+	}
+	if (addr)
+		epn_rxtx |= UDC_EPN_RX_VALID;
+	BUG_ON(buf & 0x07);
+	epn_rxtx |= buf >> 3;
+
+	DBG("%s addr %02x rxtx %04x maxp %d%s buf %d\n",
+		name, addr, epn_rxtx, maxp, dbuf ? "x2" : "", buf);
+
+	if (addr & USB_DIR_IN)
+		omap_writew(epn_rxtx, UDC_EP_TX(addr & 0xf));
+	else
+		omap_writew(epn_rxtx, UDC_EP_RX(addr));
+
+	/* next endpoint's buffer starts after this one's */
+	buf += maxp;
+	if (dbuf)
+		buf += maxp;
+	BUG_ON(buf > 2048);
+
+	/* set up driver data structures */
+	BUG_ON(strlen(name) >= sizeof ep->name);
+	strscpy(ep->name, name, sizeof(ep->name));
+	INIT_LIST_HEAD(&ep->queue);
+	INIT_LIST_HEAD(&ep->iso);
+	ep->bEndpointAddress = addr;
+	ep->bmAttributes = type;
+	ep->double_buf = dbuf;
+	ep->udc = udc;
+
+	switch (type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		ep->ep.caps.type_control = true;
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		ep->ep.caps.type_iso = true;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		ep->ep.caps.type_bulk = true;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		ep->ep.caps.type_int = true;
+		break;
+	}
+
+	if (addr & USB_DIR_IN)
+		ep->ep.caps.dir_in = true;
+	else
+		ep->ep.caps.dir_out = true;
+
+	ep->ep.name = ep->name;
+	ep->ep.ops = &omap_ep_ops;
+	ep->maxpacket = maxp;
+	usb_ep_set_maxpacket_limit(&ep->ep, ep->maxpacket);
+	list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+
+	return buf;
+}
+
+static void omap_udc_release(struct device *dev)
+{
+	pullup_disable(udc);
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
+		usb_put_phy(udc->transceiver);
+		udc->transceiver = NULL;
+	}
+	omap_writew(0, UDC_SYSCON1);
+	remove_proc_file();
+	if (udc->dc_clk) {
+		if (udc->clk_requested)
+			omap_udc_enable_clock(0);
+		clk_unprepare(udc->hhc_clk);
+		clk_unprepare(udc->dc_clk);
+		clk_put(udc->hhc_clk);
+		clk_put(udc->dc_clk);
+	}
+	if (udc->done)
+		complete(udc->done);
+	kfree(udc);
+}
+
+static int
+omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
+{
+	unsigned	tmp, buf;
+
+	/* abolish any previous hardware state */
+	omap_writew(0, UDC_SYSCON1);
+	omap_writew(0, UDC_IRQ_EN);
+	omap_writew(UDC_IRQ_SRC_MASK, UDC_IRQ_SRC);
+	omap_writew(0, UDC_DMA_IRQ_EN);
+	omap_writew(0, UDC_RXDMA_CFG);
+	omap_writew(0, UDC_TXDMA_CFG);
+
+	/* UDC_PULLUP_EN gates the chip clock */
+	/* OTG_SYSCON_1 |= DEV_IDLE_EN; */
+
+	udc = kzalloc(sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
+
+	spin_lock_init(&udc->lock);
+
+	udc->gadget.ops = &omap_gadget_ops;
+	udc->gadget.ep0 = &udc->ep[0].ep;
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+	INIT_LIST_HEAD(&udc->iso);
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->gadget.max_speed = USB_SPEED_FULL;
+	udc->gadget.name = driver_name;
+	udc->gadget.quirk_ep_out_aligned_size = 1;
+	udc->transceiver = xceiv;
+
+	/* ep0 is special; put it right after the SETUP buffer */
+	buf = omap_ep_setup("ep0", 0, USB_ENDPOINT_XFER_CONTROL,
+			8 /* after SETUP */, 64 /* maxpacket */, 0);
+	list_del_init(&udc->ep[0].ep.ep_list);
+
+	/* initially disable all non-ep0 endpoints */
+	for (tmp = 1; tmp < 15; tmp++) {
+		omap_writew(0, UDC_EP_RX(tmp));
+		omap_writew(0, UDC_EP_TX(tmp));
+	}
+
+#define OMAP_BULK_EP(name, addr) \
+	buf = omap_ep_setup(name "-bulk", addr, \
+			USB_ENDPOINT_XFER_BULK, buf, 64, 1);
+#define OMAP_INT_EP(name, addr, maxp) \
+	buf = omap_ep_setup(name "-int", addr, \
+			USB_ENDPOINT_XFER_INT, buf, maxp, 0);
+#define OMAP_ISO_EP(name, addr, maxp) \
+	buf = omap_ep_setup(name "-iso", addr, \
+			USB_ENDPOINT_XFER_ISOC, buf, maxp, 1);
+
+	switch (fifo_mode) {
+	case 0:
+		OMAP_BULK_EP("ep1in",  USB_DIR_IN  | 1);
+		OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2);
+		OMAP_INT_EP("ep3in",   USB_DIR_IN  | 3, 16);
+		break;
+	case 1:
+		OMAP_BULK_EP("ep1in",  USB_DIR_IN  | 1);
+		OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2);
+		OMAP_INT_EP("ep9in",   USB_DIR_IN  | 9, 16);
+
+		OMAP_BULK_EP("ep3in",  USB_DIR_IN  | 3);
+		OMAP_BULK_EP("ep4out", USB_DIR_OUT | 4);
+		OMAP_INT_EP("ep10in",  USB_DIR_IN  | 10, 16);
+
+		OMAP_BULK_EP("ep5in",  USB_DIR_IN  | 5);
+		OMAP_BULK_EP("ep5out", USB_DIR_OUT | 5);
+		OMAP_INT_EP("ep11in",  USB_DIR_IN  | 11, 16);
+
+		OMAP_BULK_EP("ep6in",  USB_DIR_IN  | 6);
+		OMAP_BULK_EP("ep6out", USB_DIR_OUT | 6);
+		OMAP_INT_EP("ep12in",  USB_DIR_IN  | 12, 16);
+
+		OMAP_BULK_EP("ep7in",  USB_DIR_IN  | 7);
+		OMAP_BULK_EP("ep7out", USB_DIR_OUT | 7);
+		OMAP_INT_EP("ep13in",  USB_DIR_IN  | 13, 16);
+		OMAP_INT_EP("ep13out", USB_DIR_OUT | 13, 16);
+
+		OMAP_BULK_EP("ep8in",  USB_DIR_IN  | 8);
+		OMAP_BULK_EP("ep8out", USB_DIR_OUT | 8);
+		OMAP_INT_EP("ep14in",  USB_DIR_IN  | 14, 16);
+		OMAP_INT_EP("ep14out", USB_DIR_OUT | 14, 16);
+
+		OMAP_BULK_EP("ep15in",  USB_DIR_IN  | 15);
+		OMAP_BULK_EP("ep15out", USB_DIR_OUT | 15);
+
+		break;
+
+#ifdef	USE_ISO
+	case 2:			/* mixed iso/bulk */
+		OMAP_ISO_EP("ep1in",   USB_DIR_IN  | 1, 256);
+		OMAP_ISO_EP("ep2out",  USB_DIR_OUT | 2, 256);
+		OMAP_ISO_EP("ep3in",   USB_DIR_IN  | 3, 128);
+		OMAP_ISO_EP("ep4out",  USB_DIR_OUT | 4, 128);
+
+		OMAP_INT_EP("ep5in",   USB_DIR_IN  | 5, 16);
+
+		OMAP_BULK_EP("ep6in",  USB_DIR_IN  | 6);
+		OMAP_BULK_EP("ep7out", USB_DIR_OUT | 7);
+		OMAP_INT_EP("ep8in",   USB_DIR_IN  | 8, 16);
+		break;
+	case 3:			/* mixed bulk/iso */
+		OMAP_BULK_EP("ep1in",  USB_DIR_IN  | 1);
+		OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2);
+		OMAP_INT_EP("ep3in",   USB_DIR_IN  | 3, 16);
+
+		OMAP_BULK_EP("ep4in",  USB_DIR_IN  | 4);
+		OMAP_BULK_EP("ep5out", USB_DIR_OUT | 5);
+		OMAP_INT_EP("ep6in",   USB_DIR_IN  | 6, 16);
+
+		OMAP_ISO_EP("ep7in",   USB_DIR_IN  | 7, 256);
+		OMAP_ISO_EP("ep8out",  USB_DIR_OUT | 8, 256);
+		OMAP_INT_EP("ep9in",   USB_DIR_IN  | 9, 16);
+		break;
+#endif
+
+	/* add more modes as needed */
+
+	default:
+		ERR("unsupported fifo_mode #%d\n", fifo_mode);
+		return -ENODEV;
+	}
+	omap_writew(UDC_CFG_LOCK|UDC_SELF_PWR, UDC_SYSCON1);
+	INFO("fifo mode %d, %d bytes not used\n", fifo_mode, 2048 - buf);
+	return 0;
+}
+
+static int omap_udc_probe(struct platform_device *pdev)
+{
+	int			status = -ENODEV;
+	int			hmc;
+	struct usb_phy		*xceiv = NULL;
+	const char		*type = NULL;
+	struct omap_usb_config	*config = dev_get_platdata(&pdev->dev);
+	struct clk		*dc_clk = NULL;
+	struct clk		*hhc_clk = NULL;
+
+	if (cpu_is_omap7xx())
+		use_dma = 0;
+
+	/* NOTE:  "knows" the order of the resources! */
+	if (!request_mem_region(pdev->resource[0].start,
+			resource_size(&pdev->resource[0]),
+			driver_name)) {
+		DBG("request_mem_region failed\n");
+		return -EBUSY;
+	}
+
+	if (cpu_is_omap16xx()) {
+		dc_clk = clk_get(&pdev->dev, "usb_dc_ck");
+		hhc_clk = clk_get(&pdev->dev, "usb_hhc_ck");
+		BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
+		/* can't use omap_udc_enable_clock yet */
+		clk_prepare_enable(dc_clk);
+		clk_prepare_enable(hhc_clk);
+		udelay(100);
+	}
+
+	if (cpu_is_omap7xx()) {
+		dc_clk = clk_get(&pdev->dev, "usb_dc_ck");
+		hhc_clk = clk_get(&pdev->dev, "l3_ocpi_ck");
+		BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
+		/* can't use omap_udc_enable_clock yet */
+		clk_prepare_enable(dc_clk);
+		clk_prepare_enable(hhc_clk);
+		udelay(100);
+	}
+
+	INFO("OMAP UDC rev %d.%d%s\n",
+		omap_readw(UDC_REV) >> 4, omap_readw(UDC_REV) & 0xf,
+		config->otg ? ", Mini-AB" : "");
+
+	/* use the mode given to us by board init code */
+	if (cpu_is_omap15xx()) {
+		hmc = HMC_1510;
+		type = "(unknown)";
+
+		if (machine_without_vbus_sense()) {
+			/* just set up software VBUS detect, and then
+			 * later rig it so we always report VBUS.
+			 * FIXME without really sensing VBUS, we can't
+			 * know when to turn PULLUP_EN on/off; and that
+			 * means we always "need" the 48MHz clock.
+			 */
+			u32 tmp = omap_readl(FUNC_MUX_CTRL_0);
+			tmp &= ~VBUS_CTRL_1510;
+			omap_writel(tmp, FUNC_MUX_CTRL_0);
+			tmp |= VBUS_MODE_1510;
+			tmp &= ~VBUS_CTRL_1510;
+			omap_writel(tmp, FUNC_MUX_CTRL_0);
+		}
+	} else {
+		/* The transceiver may package some GPIO logic or handle
+		 * loopback and/or transceiverless setup; if we find one,
+		 * use it.  Except for OTG, we don't _need_ to talk to one;
+		 * but not having one probably means no VBUS detection.
+		 */
+		xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+		if (!IS_ERR_OR_NULL(xceiv))
+			type = xceiv->label;
+		else if (config->otg) {
+			DBG("OTG requires external transceiver!\n");
+			goto cleanup0;
+		}
+
+		hmc = HMC_1610;
+
+		switch (hmc) {
+		case 0:			/* POWERUP DEFAULT == 0 */
+		case 4:
+		case 12:
+		case 20:
+			if (!cpu_is_omap1710()) {
+				type = "integrated";
+				break;
+			}
+			fallthrough;
+		case 3:
+		case 11:
+		case 16:
+		case 19:
+		case 25:
+			if (IS_ERR_OR_NULL(xceiv)) {
+				DBG("external transceiver not registered!\n");
+				type = "unknown";
+			}
+			break;
+		case 21:			/* internal loopback */
+			type = "loopback";
+			break;
+		case 14:			/* transceiverless */
+			if (cpu_is_omap1710())
+				goto bad_on_1710;
+			fallthrough;
+		case 13:
+		case 15:
+			type = "no";
+			break;
+
+		default:
+bad_on_1710:
+			ERR("unrecognized UDC HMC mode %d\n", hmc);
+			goto cleanup0;
+		}
+	}
+
+	INFO("hmc mode %d, %s transceiver\n", hmc, type);
+
+	/* a "gadget" abstracts/virtualizes the controller */
+	status = omap_udc_setup(pdev, xceiv);
+	if (status)
+		goto cleanup0;
+
+	xceiv = NULL;
+	/* "udc" is now valid */
+	pullup_disable(udc);
+#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
+	udc->gadget.is_otg = (config->otg != 0);
+#endif
+
+	/* starting with omap1710 es2.0, clear toggle is a separate bit */
+	if (omap_readw(UDC_REV) >= 0x61)
+		udc->clr_halt = UDC_RESET_EP | UDC_CLRDATA_TOGGLE;
+	else
+		udc->clr_halt = UDC_RESET_EP;
+
+	/* USB general purpose IRQ:  ep0, state changes, dma, etc */
+	status = devm_request_irq(&pdev->dev, pdev->resource[1].start,
+				  omap_udc_irq, 0, driver_name, udc);
+	if (status != 0) {
+		ERR("can't get irq %d, err %d\n",
+			(int) pdev->resource[1].start, status);
+		goto cleanup1;
+	}
+
+	/* USB "non-iso" IRQ (PIO for all but ep0) */
+	status = devm_request_irq(&pdev->dev, pdev->resource[2].start,
+				  omap_udc_pio_irq, 0, "omap_udc pio", udc);
+	if (status != 0) {
+		ERR("can't get irq %d, err %d\n",
+			(int) pdev->resource[2].start, status);
+		goto cleanup1;
+	}
+#ifdef	USE_ISO
+	status = devm_request_irq(&pdev->dev, pdev->resource[3].start,
+				  omap_udc_iso_irq, 0, "omap_udc iso", udc);
+	if (status != 0) {
+		ERR("can't get irq %d, err %d\n",
+			(int) pdev->resource[3].start, status);
+		goto cleanup1;
+	}
+#endif
+	if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
+		udc->dc_clk = dc_clk;
+		udc->hhc_clk = hhc_clk;
+		clk_disable(hhc_clk);
+		clk_disable(dc_clk);
+	}
+
+	create_proc_file();
+	return usb_add_gadget_udc_release(&pdev->dev, &udc->gadget,
+					  omap_udc_release);
+
+cleanup1:
+	kfree(udc);
+	udc = NULL;
+
+cleanup0:
+	if (!IS_ERR_OR_NULL(xceiv))
+		usb_put_phy(xceiv);
+
+	if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
+		clk_disable_unprepare(hhc_clk);
+		clk_disable_unprepare(dc_clk);
+		clk_put(hhc_clk);
+		clk_put(dc_clk);
+	}
+
+	release_mem_region(pdev->resource[0].start,
+			   resource_size(&pdev->resource[0]));
+
+	return status;
+}
+
+static int omap_udc_remove(struct platform_device *pdev)
+{
+	DECLARE_COMPLETION_ONSTACK(done);
+
+	udc->done = &done;
+
+	usb_del_gadget_udc(&udc->gadget);
+
+	wait_for_completion(&done);
+
+	release_mem_region(pdev->resource[0].start,
+			   resource_size(&pdev->resource[0]));
+
+	return 0;
+}
+
+/* suspend/resume/wakeup from sysfs (echo > power/state) or when the
+ * system is forced into deep sleep
+ *
+ * REVISIT we should probably reject suspend requests when there's a host
+ * session active, rather than disconnecting, at least on boards that can
+ * report VBUS irqs (UDC_DEVSTAT.UDC_ATT).  And in any case, we need to
+ * make host resumes and VBUS detection trigger OMAP wakeup events; that
+ * may involve talking to an external transceiver (e.g. isp1301).
+ */
+
+static int omap_udc_suspend(struct platform_device *dev, pm_message_t message)
+{
+	u32	devstat;
+
+	devstat = omap_readw(UDC_DEVSTAT);
+
+	/* we're requesting 48 MHz clock if the pullup is enabled
+	 * (== we're attached to the host) and we're not suspended,
+	 * which would prevent entry to deep sleep...
+	 */
+	if ((devstat & UDC_ATT) != 0 && (devstat & UDC_SUS) == 0) {
+		WARNING("session active; suspend requires disconnect\n");
+		omap_pullup(&udc->gadget, 0);
+	}
+
+	return 0;
+}
+
+static int omap_udc_resume(struct platform_device *dev)
+{
+	DBG("resume + wakeup/SRP\n");
+	omap_pullup(&udc->gadget, 1);
+
+	/* maybe the host would enumerate us if we nudged it */
+	msleep(100);
+	return omap_wakeup(&udc->gadget);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct platform_driver udc_driver = {
+	.probe		= omap_udc_probe,
+	.remove		= omap_udc_remove,
+	.suspend	= omap_udc_suspend,
+	.resume		= omap_udc_resume,
+	.driver		= {
+		.name	= driver_name,
+	},
+};
+
+module_platform_driver(udc_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:omap_udc");
diff --git a/drivers/usb/gadget/udc/omap_udc.h b/drivers/usb/gadget/udc/omap_udc.h
new file mode 100644
index 000000000..00f9e608e
--- /dev/null
+++ b/drivers/usb/gadget/udc/omap_udc.h
@@ -0,0 +1,207 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * omap_udc.h -- for omap 3.2 udc, with OTG support
+ *
+ * 2004 (C) Texas Instruments, Inc.
+ * 2004 (C) David Brownell
+ */
+
+/*
+ * USB device/endpoint management registers
+ */
+
+#define	UDC_REV				(UDC_BASE + 0x0)	/* Revision */
+#define	UDC_EP_NUM			(UDC_BASE + 0x4)	/* Which endpoint */
+#	define	UDC_SETUP_SEL		(1 << 6)
+#	define	UDC_EP_SEL		(1 << 5)
+#	define	UDC_EP_DIR		(1 << 4)
+	/* low 4 bits for endpoint number */
+#define	UDC_DATA			(UDC_BASE + 0x08)	/* Endpoint FIFO */
+#define	UDC_CTRL			(UDC_BASE + 0x0C)	/* Endpoint control */
+#	define	UDC_CLR_HALT		(1 << 7)
+#	define	UDC_SET_HALT		(1 << 6)
+#	define	UDC_CLRDATA_TOGGLE	(1 << 3)
+#	define	UDC_SET_FIFO_EN		(1 << 2)
+#	define	UDC_CLR_EP		(1 << 1)
+#	define	UDC_RESET_EP		(1 << 0)
+#define	UDC_STAT_FLG			(UDC_BASE + 0x10)	/* Endpoint status */
+#	define	UDC_NO_RXPACKET		(1 << 15)
+#	define	UDC_MISS_IN		(1 << 14)
+#	define	UDC_DATA_FLUSH		(1 << 13)
+#	define	UDC_ISO_ERR		(1 << 12)
+#	define	UDC_ISO_FIFO_EMPTY	(1 << 9)
+#	define	UDC_ISO_FIFO_FULL	(1 << 8)
+#	define	UDC_EP_HALTED		(1 << 6)
+#	define	UDC_STALL		(1 << 5)
+#	define	UDC_NAK			(1 << 4)
+#	define	UDC_ACK			(1 << 3)
+#	define	UDC_FIFO_EN		(1 << 2)
+#	define	UDC_NON_ISO_FIFO_EMPTY	(1 << 1)
+#	define	UDC_NON_ISO_FIFO_FULL	(1 << 0)
+#define	UDC_RXFSTAT			(UDC_BASE + 0x14)	/* OUT bytecount */
+#define	UDC_SYSCON1			(UDC_BASE + 0x18)	/* System config 1 */
+#	define	UDC_CFG_LOCK		(1 << 8)
+#	define	UDC_DATA_ENDIAN		(1 << 7)
+#	define	UDC_DMA_ENDIAN		(1 << 6)
+#	define	UDC_NAK_EN		(1 << 4)
+#	define	UDC_AUTODECODE_DIS	(1 << 3)
+#	define	UDC_SELF_PWR		(1 << 2)
+#	define	UDC_SOFF_DIS		(1 << 1)
+#	define	UDC_PULLUP_EN		(1 << 0)
+#define	UDC_SYSCON2			(UDC_BASE + 0x1C)	/* System config 2 */
+#	define	UDC_RMT_WKP		(1 << 6)
+#	define	UDC_STALL_CMD		(1 << 5)
+#	define	UDC_DEV_CFG		(1 << 3)
+#	define	UDC_CLR_CFG		(1 << 2)
+#define	UDC_DEVSTAT			(UDC_BASE + 0x20)	/* Device status */
+#	define	UDC_B_HNP_ENABLE	(1 << 9)
+#	define	UDC_A_HNP_SUPPORT	(1 << 8)
+#	define	UDC_A_ALT_HNP_SUPPORT	(1 << 7)
+#	define	UDC_R_WK_OK		(1 << 6)
+#	define	UDC_USB_RESET		(1 << 5)
+#	define	UDC_SUS			(1 << 4)
+#	define	UDC_CFG			(1 << 3)
+#	define	UDC_ADD			(1 << 2)
+#	define	UDC_DEF			(1 << 1)
+#	define	UDC_ATT			(1 << 0)
+#define	UDC_SOF				(UDC_BASE + 0x24)	/* Start of frame */
+#	define	UDC_FT_LOCK		(1 << 12)
+#	define	UDC_TS_OK		(1 << 11)
+#	define	UDC_TS			0x03ff
+#define	UDC_IRQ_EN			(UDC_BASE + 0x28)	/* Interrupt enable */
+#	define	UDC_SOF_IE		(1 << 7)
+#	define	UDC_EPN_RX_IE		(1 << 5)
+#	define	UDC_EPN_TX_IE		(1 << 4)
+#	define	UDC_DS_CHG_IE		(1 << 3)
+#	define	UDC_EP0_IE		(1 << 0)
+#define	UDC_DMA_IRQ_EN			(UDC_BASE + 0x2C)	/* DMA irq enable */
+	/* rx/tx dma channels numbered 1-3 not 0-2 */
+#	define	UDC_TX_DONE_IE(n)	(1 << (4 * (n) - 2))
+#	define	UDC_RX_CNT_IE(n)	(1 << (4 * (n) - 3))
+#	define	UDC_RX_EOT_IE(n)	(1 << (4 * (n) - 4))
+#define	UDC_IRQ_SRC			(UDC_BASE + 0x30)	/* Interrupt source */
+#	define	UDC_TXN_DONE		(1 << 10)
+#	define	UDC_RXN_CNT		(1 << 9)
+#	define	UDC_RXN_EOT		(1 << 8)
+#	define	UDC_IRQ_SOF		(1 << 7)
+#	define	UDC_EPN_RX		(1 << 5)
+#	define	UDC_EPN_TX		(1 << 4)
+#	define	UDC_DS_CHG		(1 << 3)
+#	define	UDC_SETUP		(1 << 2)
+#	define	UDC_EP0_RX		(1 << 1)
+#	define	UDC_EP0_TX		(1 << 0)
+#	define	UDC_IRQ_SRC_MASK	0x7bf
+#define	UDC_EPN_STAT			(UDC_BASE + 0x34)	/* EP irq status */
+#define	UDC_DMAN_STAT			(UDC_BASE + 0x38)	/* DMA irq status */
+#	define	UDC_DMA_RX_SB		(1 << 12)
+#	define	UDC_DMA_RX_SRC(x)	(((x)>>8) & 0xf)
+#	define	UDC_DMA_TX_SRC(x)	(((x)>>0) & 0xf)
+
+
+/* DMA configuration registers:  up to three channels in each direction.  */
+#define	UDC_RXDMA_CFG			(UDC_BASE + 0x40)	/* 3 eps for RX DMA */
+#	define	UDC_DMA_REQ		(1 << 12)
+#define	UDC_TXDMA_CFG			(UDC_BASE + 0x44)	/* 3 eps for TX DMA */
+#define	UDC_DATA_DMA			(UDC_BASE + 0x48)	/* rx/tx fifo addr */
+
+/* rx/tx dma control, numbering channels 1-3 not 0-2 */
+#define	UDC_TXDMA(chan)			(UDC_BASE + 0x50 - 4 + 4 * (chan))
+#	define UDC_TXN_EOT		(1 << 15)	/* bytes vs packets */
+#	define UDC_TXN_START		(1 << 14)	/* start transfer */
+#	define UDC_TXN_TSC		0x03ff		/* units in xfer */
+#define	UDC_RXDMA(chan)			(UDC_BASE + 0x60 - 4 + 4 * (chan))
+#	define UDC_RXN_STOP		(1 << 15)	/* enable EOT irq */
+#	define UDC_RXN_TC		0x00ff		/* packets in xfer */
+
+
+/*
+ * Endpoint configuration registers (used before CFG_LOCK is set)
+ * UDC_EP_TX(0) is unused
+ */
+#define	UDC_EP_RX(endpoint)		(UDC_BASE + 0x80 + (endpoint)*4)
+#	define	UDC_EPN_RX_VALID	(1 << 15)
+#	define	UDC_EPN_RX_DB		(1 << 14)
+	/* buffer size in bits 13, 12 */
+#	define	UDC_EPN_RX_ISO		(1 << 11)
+	/* buffer pointer in low 11 bits */
+#define	UDC_EP_TX(endpoint)		(UDC_BASE + 0xc0 + (endpoint)*4)
+	/* same bitfields as in RX */
+
+/*-------------------------------------------------------------------------*/
+
+struct omap_req {
+	struct usb_request		req;
+	struct list_head		queue;
+	unsigned			dma_bytes;
+	unsigned			mapped:1;
+};
+
+struct omap_ep {
+	struct usb_ep			ep;
+	struct list_head		queue;
+	unsigned long			irqs;
+	struct list_head		iso;
+	char				name[14];
+	u16				maxpacket;
+	u8				bEndpointAddress;
+	u8				bmAttributes;
+	unsigned			double_buf:1;
+	unsigned			stopped:1;
+	unsigned			fnf:1;
+	unsigned			has_dma:1;
+	u8				ackwait;
+	u8				dma_channel;
+	u16				dma_counter;
+	int				lch;
+	struct omap_udc			*udc;
+	struct timer_list		timer;
+};
+
+struct omap_udc {
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	spinlock_t			lock;
+	struct omap_ep			ep[32];
+	u16				devstat;
+	u16				clr_halt;
+	struct usb_phy			*transceiver;
+	struct list_head		iso;
+	unsigned			softconnect:1;
+	unsigned			vbus_active:1;
+	unsigned			ep0_pending:1;
+	unsigned			ep0_in:1;
+	unsigned			ep0_set_config:1;
+	unsigned			ep0_reset_config:1;
+	unsigned			ep0_setup:1;
+	struct completion		*done;
+	struct clk			*dc_clk;
+	struct clk			*hhc_clk;
+	unsigned			clk_requested:1;
+};
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef VERBOSE
+#    define VDBG		DBG
+#else
+#    define VDBG(stuff...)	do{}while(0)
+#endif
+
+#define ERR(stuff...)		pr_err("udc: " stuff)
+#define WARNING(stuff...)	pr_warn("udc: " stuff)
+#define INFO(stuff...)		pr_info("udc: " stuff)
+#define DBG(stuff...)		pr_debug("udc: " stuff)
+
+/*-------------------------------------------------------------------------*/
+
+/* MOD_CONF_CTRL_0 */
+#define VBUS_W2FC_1510		(1 << 17)	/* 0 gpio0, 1 dvdd2 pin */
+
+/* FUNC_MUX_CTRL_0 */
+#define	VBUS_CTRL_1510		(1 << 19)	/* 1 connected (software) */
+#define	VBUS_MODE_1510		(1 << 18)	/* 0 hardware, 1 software */
+
+#define	HMC_1510	((omap_readl(MOD_CONF_CTRL_0) >> 1) & 0x3f)
+#define	HMC_1610	(omap_readl(OTG_SYSCON_2) & 0x3f)
+#define	HMC		(cpu_is_omap15xx() ? HMC_1510 : HMC_1610)
+
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
new file mode 100644
index 000000000..4f8617210
--- /dev/null
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -0,0 +1,3163 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/irq.h>
+
+#define PCH_VBUS_PERIOD		3000	/* VBUS polling period (msec) */
+#define PCH_VBUS_INTERVAL	10	/* VBUS polling interval (msec) */
+
+/* Address offset of Registers */
+#define UDC_EP_REG_SHIFT	0x20	/* Offset to next EP */
+
+#define UDC_EPCTL_ADDR		0x00	/* Endpoint control */
+#define UDC_EPSTS_ADDR		0x04	/* Endpoint status */
+#define UDC_BUFIN_FRAMENUM_ADDR	0x08	/* buffer size in / frame number out */
+#define UDC_BUFOUT_MAXPKT_ADDR	0x0C	/* buffer size out / maxpkt in */
+#define UDC_SUBPTR_ADDR		0x10	/* setup buffer pointer */
+#define UDC_DESPTR_ADDR		0x14	/* Data descriptor pointer */
+#define UDC_CONFIRM_ADDR	0x18	/* Write/Read confirmation */
+
+#define UDC_DEVCFG_ADDR		0x400	/* Device configuration */
+#define UDC_DEVCTL_ADDR		0x404	/* Device control */
+#define UDC_DEVSTS_ADDR		0x408	/* Device status */
+#define UDC_DEVIRQSTS_ADDR	0x40C	/* Device irq status */
+#define UDC_DEVIRQMSK_ADDR	0x410	/* Device irq mask */
+#define UDC_EPIRQSTS_ADDR	0x414	/* Endpoint irq status */
+#define UDC_EPIRQMSK_ADDR	0x418	/* Endpoint irq mask */
+#define UDC_DEVLPM_ADDR		0x41C	/* LPM control / status */
+#define UDC_CSR_BUSY_ADDR	0x4f0	/* UDC_CSR_BUSY Status register */
+#define UDC_SRST_ADDR		0x4fc	/* SOFT RESET register */
+#define UDC_CSR_ADDR		0x500	/* USB_DEVICE endpoint register */
+
+/* Endpoint control register */
+/* Bit position */
+#define UDC_EPCTL_MRXFLUSH		(1 << 12)
+#define UDC_EPCTL_RRDY			(1 << 9)
+#define UDC_EPCTL_CNAK			(1 << 8)
+#define UDC_EPCTL_SNAK			(1 << 7)
+#define UDC_EPCTL_NAK			(1 << 6)
+#define UDC_EPCTL_P			(1 << 3)
+#define UDC_EPCTL_F			(1 << 1)
+#define UDC_EPCTL_S			(1 << 0)
+#define UDC_EPCTL_ET_SHIFT		4
+/* Mask patern */
+#define UDC_EPCTL_ET_MASK		0x00000030
+/* Value for ET field */
+#define UDC_EPCTL_ET_CONTROL		0
+#define UDC_EPCTL_ET_ISO		1
+#define UDC_EPCTL_ET_BULK		2
+#define UDC_EPCTL_ET_INTERRUPT		3
+
+/* Endpoint status register */
+/* Bit position */
+#define UDC_EPSTS_XFERDONE		(1 << 27)
+#define UDC_EPSTS_RSS			(1 << 26)
+#define UDC_EPSTS_RCS			(1 << 25)
+#define UDC_EPSTS_TXEMPTY		(1 << 24)
+#define UDC_EPSTS_TDC			(1 << 10)
+#define UDC_EPSTS_HE			(1 << 9)
+#define UDC_EPSTS_MRXFIFO_EMP		(1 << 8)
+#define UDC_EPSTS_BNA			(1 << 7)
+#define UDC_EPSTS_IN			(1 << 6)
+#define UDC_EPSTS_OUT_SHIFT		4
+/* Mask patern */
+#define UDC_EPSTS_OUT_MASK		0x00000030
+#define UDC_EPSTS_ALL_CLR_MASK		0x1F0006F0
+/* Value for OUT field */
+#define UDC_EPSTS_OUT_SETUP		2
+#define UDC_EPSTS_OUT_DATA		1
+
+/* Device configuration register */
+/* Bit position */
+#define UDC_DEVCFG_CSR_PRG		(1 << 17)
+#define UDC_DEVCFG_SP			(1 << 3)
+/* SPD Valee */
+#define UDC_DEVCFG_SPD_HS		0x0
+#define UDC_DEVCFG_SPD_FS		0x1
+#define UDC_DEVCFG_SPD_LS		0x2
+
+/* Device control register */
+/* Bit position */
+#define UDC_DEVCTL_THLEN_SHIFT		24
+#define UDC_DEVCTL_BRLEN_SHIFT		16
+#define UDC_DEVCTL_CSR_DONE		(1 << 13)
+#define UDC_DEVCTL_SD			(1 << 10)
+#define UDC_DEVCTL_MODE			(1 << 9)
+#define UDC_DEVCTL_BREN			(1 << 8)
+#define UDC_DEVCTL_THE			(1 << 7)
+#define UDC_DEVCTL_DU			(1 << 4)
+#define UDC_DEVCTL_TDE			(1 << 3)
+#define UDC_DEVCTL_RDE			(1 << 2)
+#define UDC_DEVCTL_RES			(1 << 0)
+
+/* Device status register */
+/* Bit position */
+#define UDC_DEVSTS_TS_SHIFT		18
+#define UDC_DEVSTS_ENUM_SPEED_SHIFT	13
+#define UDC_DEVSTS_ALT_SHIFT		8
+#define UDC_DEVSTS_INTF_SHIFT		4
+#define UDC_DEVSTS_CFG_SHIFT		0
+/* Mask patern */
+#define UDC_DEVSTS_TS_MASK		0xfffc0000
+#define UDC_DEVSTS_ENUM_SPEED_MASK	0x00006000
+#define UDC_DEVSTS_ALT_MASK		0x00000f00
+#define UDC_DEVSTS_INTF_MASK		0x000000f0
+#define UDC_DEVSTS_CFG_MASK		0x0000000f
+/* value for maximum speed for SPEED field */
+#define UDC_DEVSTS_ENUM_SPEED_FULL	1
+#define UDC_DEVSTS_ENUM_SPEED_HIGH	0
+#define UDC_DEVSTS_ENUM_SPEED_LOW	2
+#define UDC_DEVSTS_ENUM_SPEED_FULLX	3
+
+/* Device irq register */
+/* Bit position */
+#define UDC_DEVINT_RWKP			(1 << 7)
+#define UDC_DEVINT_ENUM			(1 << 6)
+#define UDC_DEVINT_SOF			(1 << 5)
+#define UDC_DEVINT_US			(1 << 4)
+#define UDC_DEVINT_UR			(1 << 3)
+#define UDC_DEVINT_ES			(1 << 2)
+#define UDC_DEVINT_SI			(1 << 1)
+#define UDC_DEVINT_SC			(1 << 0)
+/* Mask patern */
+#define UDC_DEVINT_MSK			0x7f
+
+/* Endpoint irq register */
+/* Bit position */
+#define UDC_EPINT_IN_SHIFT		0
+#define UDC_EPINT_OUT_SHIFT		16
+#define UDC_EPINT_IN_EP0		(1 << 0)
+#define UDC_EPINT_OUT_EP0		(1 << 16)
+/* Mask patern */
+#define UDC_EPINT_MSK_DISABLE_ALL	0xffffffff
+
+/* UDC_CSR_BUSY Status register */
+/* Bit position */
+#define UDC_CSR_BUSY			(1 << 0)
+
+/* SOFT RESET register */
+/* Bit position */
+#define UDC_PSRST			(1 << 1)
+#define UDC_SRST			(1 << 0)
+
+/* USB_DEVICE endpoint register */
+/* Bit position */
+#define UDC_CSR_NE_NUM_SHIFT		0
+#define UDC_CSR_NE_DIR_SHIFT		4
+#define UDC_CSR_NE_TYPE_SHIFT		5
+#define UDC_CSR_NE_CFG_SHIFT		7
+#define UDC_CSR_NE_INTF_SHIFT		11
+#define UDC_CSR_NE_ALT_SHIFT		15
+#define UDC_CSR_NE_MAX_PKT_SHIFT	19
+/* Mask patern */
+#define UDC_CSR_NE_NUM_MASK		0x0000000f
+#define UDC_CSR_NE_DIR_MASK		0x00000010
+#define UDC_CSR_NE_TYPE_MASK		0x00000060
+#define UDC_CSR_NE_CFG_MASK		0x00000780
+#define UDC_CSR_NE_INTF_MASK		0x00007800
+#define UDC_CSR_NE_ALT_MASK		0x00078000
+#define UDC_CSR_NE_MAX_PKT_MASK		0x3ff80000
+
+#define PCH_UDC_CSR(ep)	(UDC_CSR_ADDR + ep*4)
+#define PCH_UDC_EPINT(in, num)\
+		(1 << (num + (in ? UDC_EPINT_IN_SHIFT : UDC_EPINT_OUT_SHIFT)))
+
+/* Index of endpoint */
+#define UDC_EP0IN_IDX		0
+#define UDC_EP0OUT_IDX		1
+#define UDC_EPIN_IDX(ep)	(ep * 2)
+#define UDC_EPOUT_IDX(ep)	(ep * 2 + 1)
+#define PCH_UDC_EP0		0
+#define PCH_UDC_EP1		1
+#define PCH_UDC_EP2		2
+#define PCH_UDC_EP3		3
+
+/* Number of endpoint */
+#define PCH_UDC_EP_NUM		32	/* Total number of EPs (16 IN,16 OUT) */
+#define PCH_UDC_USED_EP_NUM	4	/* EP number of EP's really used */
+/* Length Value */
+#define PCH_UDC_BRLEN		0x0F	/* Burst length */
+#define PCH_UDC_THLEN		0x1F	/* Threshold length */
+/* Value of EP Buffer Size */
+#define UDC_EP0IN_BUFF_SIZE	16
+#define UDC_EPIN_BUFF_SIZE	256
+#define UDC_EP0OUT_BUFF_SIZE	16
+#define UDC_EPOUT_BUFF_SIZE	256
+/* Value of EP maximum packet size */
+#define UDC_EP0IN_MAX_PKT_SIZE	64
+#define UDC_EP0OUT_MAX_PKT_SIZE	64
+#define UDC_BULK_MAX_PKT_SIZE	512
+
+/* DMA */
+#define DMA_DIR_RX		1	/* DMA for data receive */
+#define DMA_DIR_TX		2	/* DMA for data transmit */
+#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
+#define UDC_DMA_MAXPACKET	65536	/* maximum packet size for DMA */
+
+/**
+ * struct pch_udc_data_dma_desc - Structure to hold DMA descriptor information
+ *				  for data
+ * @status:		Status quadlet
+ * @reserved:		Reserved
+ * @dataptr:		Buffer descriptor
+ * @next:		Next descriptor
+ */
+struct pch_udc_data_dma_desc {
+	u32 status;
+	u32 reserved;
+	u32 dataptr;
+	u32 next;
+};
+
+/**
+ * struct pch_udc_stp_dma_desc - Structure to hold DMA descriptor information
+ *				 for control data
+ * @status:	Status
+ * @reserved:	Reserved
+ * @request:	Control Request
+ */
+struct pch_udc_stp_dma_desc {
+	u32 status;
+	u32 reserved;
+	struct usb_ctrlrequest request;
+} __attribute((packed));
+
+/* DMA status definitions */
+/* Buffer status */
+#define PCH_UDC_BUFF_STS	0xC0000000
+#define PCH_UDC_BS_HST_RDY	0x00000000
+#define PCH_UDC_BS_DMA_BSY	0x40000000
+#define PCH_UDC_BS_DMA_DONE	0x80000000
+#define PCH_UDC_BS_HST_BSY	0xC0000000
+/*  Rx/Tx Status */
+#define PCH_UDC_RXTX_STS	0x30000000
+#define PCH_UDC_RTS_SUCC	0x00000000
+#define PCH_UDC_RTS_DESERR	0x10000000
+#define PCH_UDC_RTS_BUFERR	0x30000000
+/* Last Descriptor Indication */
+#define PCH_UDC_DMA_LAST	0x08000000
+/* Number of Rx/Tx Bytes Mask */
+#define PCH_UDC_RXTX_BYTES	0x0000ffff
+
+/**
+ * struct pch_udc_cfg_data - Structure to hold current configuration
+ *			     and interface information
+ * @cur_cfg:	current configuration in use
+ * @cur_intf:	current interface in use
+ * @cur_alt:	current alt interface in use
+ */
+struct pch_udc_cfg_data {
+	u16 cur_cfg;
+	u16 cur_intf;
+	u16 cur_alt;
+};
+
+/**
+ * struct pch_udc_ep - Structure holding a PCH USB device Endpoint information
+ * @ep:			embedded ep request
+ * @td_stp_phys:	for setup request
+ * @td_data_phys:	for data request
+ * @td_stp:		for setup request
+ * @td_data:		for data request
+ * @dev:		reference to device struct
+ * @offset_addr:	offset address of ep register
+ * @desc:		for this ep
+ * @queue:		queue for requests
+ * @num:		endpoint number
+ * @in:			endpoint is IN
+ * @halted:		endpoint halted?
+ * @epsts:		Endpoint status
+ */
+struct pch_udc_ep {
+	struct usb_ep			ep;
+	dma_addr_t			td_stp_phys;
+	dma_addr_t			td_data_phys;
+	struct pch_udc_stp_dma_desc	*td_stp;
+	struct pch_udc_data_dma_desc	*td_data;
+	struct pch_udc_dev		*dev;
+	unsigned long			offset_addr;
+	struct list_head		queue;
+	unsigned			num:5,
+					in:1,
+					halted:1;
+	unsigned long			epsts;
+};
+
+/**
+ * struct pch_vbus_gpio_data - Structure holding GPIO informaton
+ *					for detecting VBUS
+ * @port:		gpio descriptor for the VBUS GPIO
+ * @intr:		gpio interrupt number
+ * @irq_work_fall:	Structure for WorkQueue
+ * @irq_work_rise:	Structure for WorkQueue
+ */
+struct pch_vbus_gpio_data {
+	struct gpio_desc	*port;
+	int			intr;
+	struct work_struct	irq_work_fall;
+	struct work_struct	irq_work_rise;
+};
+
+/**
+ * struct pch_udc_dev - Structure holding complete information
+ *			of the PCH USB device
+ * @gadget:		gadget driver data
+ * @driver:		reference to gadget driver bound
+ * @pdev:		reference to the PCI device
+ * @ep:			array of endpoints
+ * @lock:		protects all state
+ * @stall:		stall requested
+ * @prot_stall:		protcol stall requested
+ * @registered:		driver registered with system
+ * @suspended:		driver in suspended state
+ * @connected:		gadget driver associated
+ * @vbus_session:	required vbus_session state
+ * @set_cfg_not_acked:	pending acknowledgement 4 setup
+ * @waiting_zlp_ack:	pending acknowledgement 4 ZLP
+ * @data_requests:	DMA pool for data requests
+ * @stp_requests:	DMA pool for setup requests
+ * @dma_addr:		DMA pool for received
+ * @setup_data:		Received setup data
+ * @base_addr:		for mapped device memory
+ * @bar:		PCI BAR used for mapped device memory
+ * @cfg_data:		current cfg, intf, and alt in use
+ * @vbus_gpio:		GPIO informaton for detecting VBUS
+ */
+struct pch_udc_dev {
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	struct pci_dev			*pdev;
+	struct pch_udc_ep		ep[PCH_UDC_EP_NUM];
+	spinlock_t			lock; /* protects all state */
+	unsigned
+			stall:1,
+			prot_stall:1,
+			suspended:1,
+			connected:1,
+			vbus_session:1,
+			set_cfg_not_acked:1,
+			waiting_zlp_ack:1;
+	struct dma_pool		*data_requests;
+	struct dma_pool		*stp_requests;
+	dma_addr_t			dma_addr;
+	struct usb_ctrlrequest		setup_data;
+	void __iomem			*base_addr;
+	unsigned short			bar;
+	struct pch_udc_cfg_data		cfg_data;
+	struct pch_vbus_gpio_data	vbus_gpio;
+};
+#define to_pch_udc(g)	(container_of((g), struct pch_udc_dev, gadget))
+
+#define PCH_UDC_PCI_BAR_QUARK_X1000	0
+#define PCH_UDC_PCI_BAR			1
+
+#define PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC	0x0939
+#define PCI_DEVICE_ID_INTEL_EG20T_UDC		0x8808
+
+#define PCI_DEVICE_ID_ML7213_IOH_UDC	0x801D
+#define PCI_DEVICE_ID_ML7831_IOH_UDC	0x8808
+
+static const char	ep0_string[] = "ep0in";
+static DEFINE_SPINLOCK(udc_stall_spinlock);	/* stall spin lock */
+static bool speed_fs;
+module_param_named(speed_fs, speed_fs, bool, S_IRUGO);
+MODULE_PARM_DESC(speed_fs, "true for Full speed operation");
+
+/**
+ * struct pch_udc_request - Structure holding a PCH USB device request packet
+ * @req:		embedded ep request
+ * @td_data_phys:	phys. address
+ * @td_data:		first dma desc. of chain
+ * @td_data_last:	last dma desc. of chain
+ * @queue:		associated queue
+ * @dma_going:		DMA in progress for request
+ * @dma_done:		DMA completed for request
+ * @chain_len:		chain length
+ */
+struct pch_udc_request {
+	struct usb_request		req;
+	dma_addr_t			td_data_phys;
+	struct pch_udc_data_dma_desc	*td_data;
+	struct pch_udc_data_dma_desc	*td_data_last;
+	struct list_head		queue;
+	unsigned			dma_going:1,
+					dma_done:1;
+	unsigned			chain_len;
+};
+
+static inline u32 pch_udc_readl(struct pch_udc_dev *dev, unsigned long reg)
+{
+	return ioread32(dev->base_addr + reg);
+}
+
+static inline void pch_udc_writel(struct pch_udc_dev *dev,
+				    unsigned long val, unsigned long reg)
+{
+	iowrite32(val, dev->base_addr + reg);
+}
+
+static inline void pch_udc_bit_set(struct pch_udc_dev *dev,
+				     unsigned long reg,
+				     unsigned long bitmask)
+{
+	pch_udc_writel(dev, pch_udc_readl(dev, reg) | bitmask, reg);
+}
+
+static inline void pch_udc_bit_clr(struct pch_udc_dev *dev,
+				     unsigned long reg,
+				     unsigned long bitmask)
+{
+	pch_udc_writel(dev, pch_udc_readl(dev, reg) & ~(bitmask), reg);
+}
+
+static inline u32 pch_udc_ep_readl(struct pch_udc_ep *ep, unsigned long reg)
+{
+	return ioread32(ep->dev->base_addr + ep->offset_addr + reg);
+}
+
+static inline void pch_udc_ep_writel(struct pch_udc_ep *ep,
+				    unsigned long val, unsigned long reg)
+{
+	iowrite32(val, ep->dev->base_addr + ep->offset_addr + reg);
+}
+
+static inline void pch_udc_ep_bit_set(struct pch_udc_ep *ep,
+				     unsigned long reg,
+				     unsigned long bitmask)
+{
+	pch_udc_ep_writel(ep, pch_udc_ep_readl(ep, reg) | bitmask, reg);
+}
+
+static inline void pch_udc_ep_bit_clr(struct pch_udc_ep *ep,
+				     unsigned long reg,
+				     unsigned long bitmask)
+{
+	pch_udc_ep_writel(ep, pch_udc_ep_readl(ep, reg) & ~(bitmask), reg);
+}
+
+/**
+ * pch_udc_csr_busy() - Wait till idle.
+ * @dev:	Reference to pch_udc_dev structure
+ */
+static void pch_udc_csr_busy(struct pch_udc_dev *dev)
+{
+	unsigned int count = 200;
+
+	/* Wait till idle */
+	while ((pch_udc_readl(dev, UDC_CSR_BUSY_ADDR) & UDC_CSR_BUSY)
+		&& --count)
+		cpu_relax();
+	if (!count)
+		dev_err(&dev->pdev->dev, "%s: wait error\n", __func__);
+}
+
+/**
+ * pch_udc_write_csr() - Write the command and status registers.
+ * @dev:	Reference to pch_udc_dev structure
+ * @val:	value to be written to CSR register
+ * @ep:		end-point number
+ */
+static void pch_udc_write_csr(struct pch_udc_dev *dev, unsigned long val,
+			       unsigned int ep)
+{
+	unsigned long reg = PCH_UDC_CSR(ep);
+
+	pch_udc_csr_busy(dev);		/* Wait till idle */
+	pch_udc_writel(dev, val, reg);
+	pch_udc_csr_busy(dev);		/* Wait till idle */
+}
+
+/**
+ * pch_udc_read_csr() - Read the command and status registers.
+ * @dev:	Reference to pch_udc_dev structure
+ * @ep:		end-point number
+ *
+ * Return codes:	content of CSR register
+ */
+static u32 pch_udc_read_csr(struct pch_udc_dev *dev, unsigned int ep)
+{
+	unsigned long reg = PCH_UDC_CSR(ep);
+
+	pch_udc_csr_busy(dev);		/* Wait till idle */
+	pch_udc_readl(dev, reg);	/* Dummy read */
+	pch_udc_csr_busy(dev);		/* Wait till idle */
+	return pch_udc_readl(dev, reg);
+}
+
+/**
+ * pch_udc_rmt_wakeup() - Initiate for remote wakeup
+ * @dev:	Reference to pch_udc_dev structure
+ */
+static inline void pch_udc_rmt_wakeup(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+	mdelay(1);
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+}
+
+/**
+ * pch_udc_get_frame() - Get the current frame from device status register
+ * @dev:	Reference to pch_udc_dev structure
+ * Retern	current frame
+ */
+static inline int pch_udc_get_frame(struct pch_udc_dev *dev)
+{
+	u32 frame = pch_udc_readl(dev, UDC_DEVSTS_ADDR);
+	return (frame & UDC_DEVSTS_TS_MASK) >> UDC_DEVSTS_TS_SHIFT;
+}
+
+/**
+ * pch_udc_clear_selfpowered() - Clear the self power control
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static inline void pch_udc_clear_selfpowered(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_clr(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_SP);
+}
+
+/**
+ * pch_udc_set_selfpowered() - Set the self power control
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static inline void pch_udc_set_selfpowered(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_SP);
+}
+
+/**
+ * pch_udc_set_disconnect() - Set the disconnect status.
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static inline void pch_udc_set_disconnect(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
+}
+
+/**
+ * pch_udc_clear_disconnect() - Clear the disconnect status.
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static void pch_udc_clear_disconnect(struct pch_udc_dev *dev)
+{
+	/* Clear the disconnect */
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
+	mdelay(1);
+	/* Resume USB signalling */
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+}
+
+static void pch_udc_init(struct pch_udc_dev *dev);
+
+/**
+ * pch_udc_reconnect() - This API initializes usb device controller,
+ *						and clear the disconnect status.
+ * @dev:		Reference to pch_udc_regs structure
+ */
+static void pch_udc_reconnect(struct pch_udc_dev *dev)
+{
+	pch_udc_init(dev);
+
+	/* enable device interrupts */
+	/* pch_udc_enable_interrupts() */
+	pch_udc_bit_clr(dev, UDC_DEVIRQMSK_ADDR,
+			UDC_DEVINT_UR | UDC_DEVINT_ENUM);
+
+	/* Clear the disconnect */
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
+	mdelay(1);
+	/* Resume USB signalling */
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+}
+
+/**
+ * pch_udc_vbus_session() - set or clearr the disconnect status.
+ * @dev:	Reference to pch_udc_regs structure
+ * @is_active:	Parameter specifying the action
+ *		  0:   indicating VBUS power is ending
+ *		  !0:  indicating VBUS power is starting
+ */
+static inline void pch_udc_vbus_session(struct pch_udc_dev *dev,
+					  int is_active)
+{
+	unsigned long		iflags;
+
+	spin_lock_irqsave(&dev->lock, iflags);
+	if (is_active) {
+		pch_udc_reconnect(dev);
+		dev->vbus_session = 1;
+	} else {
+		if (dev->driver && dev->driver->disconnect) {
+			spin_unlock_irqrestore(&dev->lock, iflags);
+			dev->driver->disconnect(&dev->gadget);
+			spin_lock_irqsave(&dev->lock, iflags);
+		}
+		pch_udc_set_disconnect(dev);
+		dev->vbus_session = 0;
+	}
+	spin_unlock_irqrestore(&dev->lock, iflags);
+}
+
+/**
+ * pch_udc_ep_set_stall() - Set the stall of endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static void pch_udc_ep_set_stall(struct pch_udc_ep *ep)
+{
+	if (ep->in) {
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_F);
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
+	} else {
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
+	}
+}
+
+/**
+ * pch_udc_ep_clear_stall() - Clear the stall of endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_clear_stall(struct pch_udc_ep *ep)
+{
+	/* Clear the stall */
+	pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
+	/* Clear NAK by writing CNAK */
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_CNAK);
+}
+
+/**
+ * pch_udc_ep_set_trfr_type() - Set the transfer type of endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @type:	Type of endpoint
+ */
+static inline void pch_udc_ep_set_trfr_type(struct pch_udc_ep *ep,
+					u8 type)
+{
+	pch_udc_ep_writel(ep, ((type << UDC_EPCTL_ET_SHIFT) &
+				UDC_EPCTL_ET_MASK), UDC_EPCTL_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_bufsz() - Set the maximum packet size for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @buf_size:	The buffer word size
+ * @ep_in:	EP is IN
+ */
+static void pch_udc_ep_set_bufsz(struct pch_udc_ep *ep,
+						 u32 buf_size, u32 ep_in)
+{
+	u32 data;
+	if (ep_in) {
+		data = pch_udc_ep_readl(ep, UDC_BUFIN_FRAMENUM_ADDR);
+		data = (data & 0xffff0000) | (buf_size & 0xffff);
+		pch_udc_ep_writel(ep, data, UDC_BUFIN_FRAMENUM_ADDR);
+	} else {
+		data = pch_udc_ep_readl(ep, UDC_BUFOUT_MAXPKT_ADDR);
+		data = (buf_size << 16) | (data & 0xffff);
+		pch_udc_ep_writel(ep, data, UDC_BUFOUT_MAXPKT_ADDR);
+	}
+}
+
+/**
+ * pch_udc_ep_set_maxpkt() - Set the Max packet size for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @pkt_size:	The packet byte size
+ */
+static void pch_udc_ep_set_maxpkt(struct pch_udc_ep *ep, u32 pkt_size)
+{
+	u32 data = pch_udc_ep_readl(ep, UDC_BUFOUT_MAXPKT_ADDR);
+	data = (data & 0xffff0000) | (pkt_size & 0xffff);
+	pch_udc_ep_writel(ep, data, UDC_BUFOUT_MAXPKT_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_subptr() - Set the Setup buffer pointer for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @addr:	Address of the register
+ */
+static inline void pch_udc_ep_set_subptr(struct pch_udc_ep *ep, u32 addr)
+{
+	pch_udc_ep_writel(ep, addr, UDC_SUBPTR_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_ddptr() - Set the Data descriptor pointer for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @addr:	Address of the register
+ */
+static inline void pch_udc_ep_set_ddptr(struct pch_udc_ep *ep, u32 addr)
+{
+	pch_udc_ep_writel(ep, addr, UDC_DESPTR_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_pd() - Set the poll demand bit for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_set_pd(struct pch_udc_ep *ep)
+{
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_P);
+}
+
+/**
+ * pch_udc_ep_set_rrdy() - Set the receive ready bit for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_set_rrdy(struct pch_udc_ep *ep)
+{
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_RRDY);
+}
+
+/**
+ * pch_udc_ep_clear_rrdy() - Clear the receive ready bit for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_clear_rrdy(struct pch_udc_ep *ep)
+{
+	pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_RRDY);
+}
+
+/**
+ * pch_udc_set_dma() - Set the 'TDE' or RDE bit of device control
+ *			register depending on the direction specified
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @dir:	whether Tx or Rx
+ *		  DMA_DIR_RX: Receive
+ *		  DMA_DIR_TX: Transmit
+ */
+static inline void pch_udc_set_dma(struct pch_udc_dev *dev, int dir)
+{
+	if (dir == DMA_DIR_RX)
+		pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RDE);
+	else if (dir == DMA_DIR_TX)
+		pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_TDE);
+}
+
+/**
+ * pch_udc_clear_dma() - Clear the 'TDE' or RDE bit of device control
+ *				 register depending on the direction specified
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @dir:	Whether Tx or Rx
+ *		  DMA_DIR_RX: Receive
+ *		  DMA_DIR_TX: Transmit
+ */
+static inline void pch_udc_clear_dma(struct pch_udc_dev *dev, int dir)
+{
+	if (dir == DMA_DIR_RX)
+		pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RDE);
+	else if (dir == DMA_DIR_TX)
+		pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_TDE);
+}
+
+/**
+ * pch_udc_set_csr_done() - Set the device control register
+ *				CSR done field (bit 13)
+ * @dev:	reference to structure of type pch_udc_regs
+ */
+static inline void pch_udc_set_csr_done(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_CSR_DONE);
+}
+
+/**
+ * pch_udc_disable_interrupts() - Disables the specified interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @mask:	Mask to disable interrupts
+ */
+static inline void pch_udc_disable_interrupts(struct pch_udc_dev *dev,
+					    u32 mask)
+{
+	pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_enable_interrupts() - Enable the specified interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @mask:	Mask to enable interrupts
+ */
+static inline void pch_udc_enable_interrupts(struct pch_udc_dev *dev,
+					   u32 mask)
+{
+	pch_udc_bit_clr(dev, UDC_DEVIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_disable_ep_interrupts() - Disable endpoint interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @mask:	Mask to disable interrupts
+ */
+static inline void pch_udc_disable_ep_interrupts(struct pch_udc_dev *dev,
+						u32 mask)
+{
+	pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_enable_ep_interrupts() - Enable endpoint interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @mask:	Mask to enable interrupts
+ */
+static inline void pch_udc_enable_ep_interrupts(struct pch_udc_dev *dev,
+					      u32 mask)
+{
+	pch_udc_bit_clr(dev, UDC_EPIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_read_device_interrupts() - Read the device interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * Retern	The device interrupts
+ */
+static inline u32 pch_udc_read_device_interrupts(struct pch_udc_dev *dev)
+{
+	return pch_udc_readl(dev, UDC_DEVIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_write_device_interrupts() - Write device interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @val:	The value to be written to interrupt register
+ */
+static inline void pch_udc_write_device_interrupts(struct pch_udc_dev *dev,
+						     u32 val)
+{
+	pch_udc_writel(dev, val, UDC_DEVIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_read_ep_interrupts() - Read the endpoint interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * Retern	The endpoint interrupt
+ */
+static inline u32 pch_udc_read_ep_interrupts(struct pch_udc_dev *dev)
+{
+	return pch_udc_readl(dev, UDC_EPIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_write_ep_interrupts() - Clear endpoint interupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @val:	The value to be written to interrupt register
+ */
+static inline void pch_udc_write_ep_interrupts(struct pch_udc_dev *dev,
+					     u32 val)
+{
+	pch_udc_writel(dev, val, UDC_EPIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_read_device_status() - Read the device status
+ * @dev:	Reference to structure of type pch_udc_regs
+ * Retern	The device status
+ */
+static inline u32 pch_udc_read_device_status(struct pch_udc_dev *dev)
+{
+	return pch_udc_readl(dev, UDC_DEVSTS_ADDR);
+}
+
+/**
+ * pch_udc_read_ep_control() - Read the endpoint control
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * Retern	The endpoint control register value
+ */
+static inline u32 pch_udc_read_ep_control(struct pch_udc_ep *ep)
+{
+	return pch_udc_ep_readl(ep, UDC_EPCTL_ADDR);
+}
+
+/**
+ * pch_udc_clear_ep_control() - Clear the endpoint control register
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * Retern	The endpoint control register value
+ */
+static inline void pch_udc_clear_ep_control(struct pch_udc_ep *ep)
+{
+	return pch_udc_ep_writel(ep, 0, UDC_EPCTL_ADDR);
+}
+
+/**
+ * pch_udc_read_ep_status() - Read the endpoint status
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * Retern	The endpoint status
+ */
+static inline u32 pch_udc_read_ep_status(struct pch_udc_ep *ep)
+{
+	return pch_udc_ep_readl(ep, UDC_EPSTS_ADDR);
+}
+
+/**
+ * pch_udc_clear_ep_status() - Clear the endpoint status
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @stat:	Endpoint status
+ */
+static inline void pch_udc_clear_ep_status(struct pch_udc_ep *ep,
+					 u32 stat)
+{
+	return pch_udc_ep_writel(ep, stat, UDC_EPSTS_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_nak() - Set the bit 7 (SNAK field)
+ *				of the endpoint control register
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_set_nak(struct pch_udc_ep *ep)
+{
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_SNAK);
+}
+
+/**
+ * pch_udc_ep_clear_nak() - Set the bit 8 (CNAK field)
+ *				of the endpoint control register
+ * @ep:		reference to structure of type pch_udc_ep_regs
+ */
+static void pch_udc_ep_clear_nak(struct pch_udc_ep *ep)
+{
+	unsigned int loopcnt = 0;
+	struct pch_udc_dev *dev = ep->dev;
+
+	if (!(pch_udc_ep_readl(ep, UDC_EPCTL_ADDR) & UDC_EPCTL_NAK))
+		return;
+	if (!ep->in) {
+		loopcnt = 10000;
+		while (!(pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP) &&
+			--loopcnt)
+			udelay(5);
+		if (!loopcnt)
+			dev_err(&dev->pdev->dev, "%s: RxFIFO not Empty\n",
+				__func__);
+	}
+	loopcnt = 10000;
+	while ((pch_udc_read_ep_control(ep) & UDC_EPCTL_NAK) && --loopcnt) {
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_CNAK);
+		udelay(5);
+	}
+	if (!loopcnt)
+		dev_err(&dev->pdev->dev, "%s: Clear NAK not set for ep%d%s\n",
+			__func__, ep->num, (ep->in ? "in" : "out"));
+}
+
+/**
+ * pch_udc_ep_fifo_flush() - Flush the endpoint fifo
+ * @ep:	reference to structure of type pch_udc_ep_regs
+ * @dir:	direction of endpoint
+ *		  0:  endpoint is OUT
+ *		  !0: endpoint is IN
+ */
+static void pch_udc_ep_fifo_flush(struct pch_udc_ep *ep, int dir)
+{
+	if (dir) {	/* IN ep */
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_F);
+		return;
+	}
+}
+
+/**
+ * pch_udc_ep_enable() - This api enables endpoint
+ * @ep:		reference to structure of type pch_udc_ep_regs
+ * @cfg:	current configuration information
+ * @desc:	endpoint descriptor
+ */
+static void pch_udc_ep_enable(struct pch_udc_ep *ep,
+			       struct pch_udc_cfg_data *cfg,
+			       const struct usb_endpoint_descriptor *desc)
+{
+	u32 val = 0;
+	u32 buff_size = 0;
+
+	pch_udc_ep_set_trfr_type(ep, desc->bmAttributes);
+	if (ep->in)
+		buff_size = UDC_EPIN_BUFF_SIZE;
+	else
+		buff_size = UDC_EPOUT_BUFF_SIZE;
+	pch_udc_ep_set_bufsz(ep, buff_size, ep->in);
+	pch_udc_ep_set_maxpkt(ep, usb_endpoint_maxp(desc));
+	pch_udc_ep_set_nak(ep);
+	pch_udc_ep_fifo_flush(ep, ep->in);
+	/* Configure the endpoint */
+	val = ep->num << UDC_CSR_NE_NUM_SHIFT | ep->in << UDC_CSR_NE_DIR_SHIFT |
+	      ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) <<
+		UDC_CSR_NE_TYPE_SHIFT) |
+	      (cfg->cur_cfg << UDC_CSR_NE_CFG_SHIFT) |
+	      (cfg->cur_intf << UDC_CSR_NE_INTF_SHIFT) |
+	      (cfg->cur_alt << UDC_CSR_NE_ALT_SHIFT) |
+	      usb_endpoint_maxp(desc) << UDC_CSR_NE_MAX_PKT_SHIFT;
+
+	if (ep->in)
+		pch_udc_write_csr(ep->dev, val, UDC_EPIN_IDX(ep->num));
+	else
+		pch_udc_write_csr(ep->dev, val, UDC_EPOUT_IDX(ep->num));
+}
+
+/**
+ * pch_udc_ep_disable() - This api disables endpoint
+ * @ep:		reference to structure of type pch_udc_ep_regs
+ */
+static void pch_udc_ep_disable(struct pch_udc_ep *ep)
+{
+	if (ep->in) {
+		/* flush the fifo */
+		pch_udc_ep_writel(ep, UDC_EPCTL_F, UDC_EPCTL_ADDR);
+		/* set NAK */
+		pch_udc_ep_writel(ep, UDC_EPCTL_SNAK, UDC_EPCTL_ADDR);
+		pch_udc_ep_bit_set(ep, UDC_EPSTS_ADDR, UDC_EPSTS_IN);
+	} else {
+		/* set NAK */
+		pch_udc_ep_writel(ep, UDC_EPCTL_SNAK, UDC_EPCTL_ADDR);
+	}
+	/* reset desc pointer */
+	pch_udc_ep_writel(ep, 0, UDC_DESPTR_ADDR);
+}
+
+/**
+ * pch_udc_wait_ep_stall() - Wait EP stall.
+ * @ep:		reference to structure of type pch_udc_ep_regs
+ */
+static void pch_udc_wait_ep_stall(struct pch_udc_ep *ep)
+{
+	unsigned int count = 10000;
+
+	/* Wait till idle */
+	while ((pch_udc_read_ep_control(ep) & UDC_EPCTL_S) && --count)
+		udelay(5);
+	if (!count)
+		dev_err(&ep->dev->pdev->dev, "%s: wait error\n", __func__);
+}
+
+/**
+ * pch_udc_init() - This API initializes usb device controller
+ * @dev:	Rreference to pch_udc_regs structure
+ */
+static void pch_udc_init(struct pch_udc_dev *dev)
+{
+	if (NULL == dev) {
+		pr_err("%s: Invalid address\n", __func__);
+		return;
+	}
+	/* Soft Reset and Reset PHY */
+	pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
+	pch_udc_writel(dev, UDC_SRST | UDC_PSRST, UDC_SRST_ADDR);
+	mdelay(1);
+	pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
+	pch_udc_writel(dev, 0x00, UDC_SRST_ADDR);
+	mdelay(1);
+	/* mask and clear all device interrupts */
+	pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, UDC_DEVINT_MSK);
+	pch_udc_bit_set(dev, UDC_DEVIRQSTS_ADDR, UDC_DEVINT_MSK);
+
+	/* mask and clear all ep interrupts */
+	pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
+	pch_udc_bit_set(dev, UDC_EPIRQSTS_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
+
+	/* enable dynamic CSR programmingi, self powered and device speed */
+	if (speed_fs)
+		pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_CSR_PRG |
+				UDC_DEVCFG_SP | UDC_DEVCFG_SPD_FS);
+	else /* defaul high speed */
+		pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_CSR_PRG |
+				UDC_DEVCFG_SP | UDC_DEVCFG_SPD_HS);
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR,
+			(PCH_UDC_THLEN << UDC_DEVCTL_THLEN_SHIFT) |
+			(PCH_UDC_BRLEN << UDC_DEVCTL_BRLEN_SHIFT) |
+			UDC_DEVCTL_MODE | UDC_DEVCTL_BREN |
+			UDC_DEVCTL_THE);
+}
+
+/**
+ * pch_udc_exit() - This API exit usb device controller
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static void pch_udc_exit(struct pch_udc_dev *dev)
+{
+	/* mask all device interrupts */
+	pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, UDC_DEVINT_MSK);
+	/* mask all ep interrupts */
+	pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
+	/* put device in disconnected state */
+	pch_udc_set_disconnect(dev);
+}
+
+/**
+ * pch_udc_pcd_get_frame() - This API is invoked to get the current frame number
+ * @gadget:	Reference to the gadget driver
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_get_frame(struct usb_gadget *gadget)
+{
+	struct pch_udc_dev	*dev;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	return pch_udc_get_frame(dev);
+}
+
+/**
+ * pch_udc_pcd_wakeup() - This API is invoked to initiate a remote wakeup
+ * @gadget:	Reference to the gadget driver
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_wakeup(struct usb_gadget *gadget)
+{
+	struct pch_udc_dev	*dev;
+	unsigned long		flags;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	spin_lock_irqsave(&dev->lock, flags);
+	pch_udc_rmt_wakeup(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_selfpowered() - This API is invoked to specify whether the device
+ *				is self powered or not
+ * @gadget:	Reference to the gadget driver
+ * @value:	Specifies self powered or not
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_selfpowered(struct usb_gadget *gadget, int value)
+{
+	struct pch_udc_dev	*dev;
+
+	if (!gadget)
+		return -EINVAL;
+	gadget->is_selfpowered = (value != 0);
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	if (value)
+		pch_udc_set_selfpowered(dev);
+	else
+		pch_udc_clear_selfpowered(dev);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_pullup() - This API is invoked to make the device
+ *				visible/invisible to the host
+ * @gadget:	Reference to the gadget driver
+ * @is_on:	Specifies whether the pull up is made active or inactive
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct pch_udc_dev	*dev;
+	unsigned long		iflags;
+
+	if (!gadget)
+		return -EINVAL;
+
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+
+	spin_lock_irqsave(&dev->lock, iflags);
+	if (is_on) {
+		pch_udc_reconnect(dev);
+	} else {
+		if (dev->driver && dev->driver->disconnect) {
+			spin_unlock_irqrestore(&dev->lock, iflags);
+			dev->driver->disconnect(&dev->gadget);
+			spin_lock_irqsave(&dev->lock, iflags);
+		}
+		pch_udc_set_disconnect(dev);
+	}
+	spin_unlock_irqrestore(&dev->lock, iflags);
+
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_vbus_session() - This API is used by a driver for an external
+ *				transceiver (or GPIO) that
+ *				detects a VBUS power session starting/ending
+ * @gadget:	Reference to the gadget driver
+ * @is_active:	specifies whether the session is starting or ending
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct pch_udc_dev	*dev;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	pch_udc_vbus_session(dev, is_active);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_vbus_draw() - This API is used by gadget drivers during
+ *				SET_CONFIGURATION calls to
+ *				specify how much power the device can consume
+ * @gadget:	Reference to the gadget driver
+ * @mA:		specifies the current limit in 2mA unit
+ *
+ * Return codes:
+ *	-EINVAL:	If the gadget passed is NULL
+ *	-EOPNOTSUPP:
+ */
+static int pch_udc_pcd_vbus_draw(struct usb_gadget *gadget, unsigned int mA)
+{
+	return -EOPNOTSUPP;
+}
+
+static int pch_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+static int pch_udc_stop(struct usb_gadget *g);
+
+static const struct usb_gadget_ops pch_udc_ops = {
+	.get_frame = pch_udc_pcd_get_frame,
+	.wakeup = pch_udc_pcd_wakeup,
+	.set_selfpowered = pch_udc_pcd_selfpowered,
+	.pullup = pch_udc_pcd_pullup,
+	.vbus_session = pch_udc_pcd_vbus_session,
+	.vbus_draw = pch_udc_pcd_vbus_draw,
+	.udc_start = pch_udc_start,
+	.udc_stop = pch_udc_stop,
+};
+
+/**
+ * pch_vbus_gpio_get_value() - This API gets value of GPIO port as VBUS status.
+ * @dev:	Reference to the driver structure
+ *
+ * Return value:
+ *	1: VBUS is high
+ *	0: VBUS is low
+ *     -1: It is not enable to detect VBUS using GPIO
+ */
+static int pch_vbus_gpio_get_value(struct pch_udc_dev *dev)
+{
+	int vbus = 0;
+
+	if (dev->vbus_gpio.port)
+		vbus = gpiod_get_value(dev->vbus_gpio.port) ? 1 : 0;
+	else
+		vbus = -1;
+
+	return vbus;
+}
+
+/**
+ * pch_vbus_gpio_work_fall() - This API keeps watch on VBUS becoming Low.
+ *                             If VBUS is Low, disconnect is processed
+ * @irq_work:	Structure for WorkQueue
+ *
+ */
+static void pch_vbus_gpio_work_fall(struct work_struct *irq_work)
+{
+	struct pch_vbus_gpio_data *vbus_gpio = container_of(irq_work,
+		struct pch_vbus_gpio_data, irq_work_fall);
+	struct pch_udc_dev *dev =
+		container_of(vbus_gpio, struct pch_udc_dev, vbus_gpio);
+	int vbus_saved = -1;
+	int vbus;
+	int count;
+
+	if (!dev->vbus_gpio.port)
+		return;
+
+	for (count = 0; count < (PCH_VBUS_PERIOD / PCH_VBUS_INTERVAL);
+		count++) {
+		vbus = pch_vbus_gpio_get_value(dev);
+
+		if ((vbus_saved == vbus) && (vbus == 0)) {
+			dev_dbg(&dev->pdev->dev, "VBUS fell");
+			if (dev->driver
+				&& dev->driver->disconnect) {
+				dev->driver->disconnect(
+					&dev->gadget);
+			}
+			if (dev->vbus_gpio.intr)
+				pch_udc_init(dev);
+			else
+				pch_udc_reconnect(dev);
+			return;
+		}
+		vbus_saved = vbus;
+		mdelay(PCH_VBUS_INTERVAL);
+	}
+}
+
+/**
+ * pch_vbus_gpio_work_rise() - This API checks VBUS is High.
+ *                             If VBUS is High, connect is processed
+ * @irq_work:	Structure for WorkQueue
+ *
+ */
+static void pch_vbus_gpio_work_rise(struct work_struct *irq_work)
+{
+	struct pch_vbus_gpio_data *vbus_gpio = container_of(irq_work,
+		struct pch_vbus_gpio_data, irq_work_rise);
+	struct pch_udc_dev *dev =
+		container_of(vbus_gpio, struct pch_udc_dev, vbus_gpio);
+	int vbus;
+
+	if (!dev->vbus_gpio.port)
+		return;
+
+	mdelay(PCH_VBUS_INTERVAL);
+	vbus = pch_vbus_gpio_get_value(dev);
+
+	if (vbus == 1) {
+		dev_dbg(&dev->pdev->dev, "VBUS rose");
+		pch_udc_reconnect(dev);
+		return;
+	}
+}
+
+/**
+ * pch_vbus_gpio_irq() - IRQ handler for GPIO interrupt for changing VBUS
+ * @irq:	Interrupt request number
+ * @data:	Reference to the device structure
+ *
+ * Return codes:
+ *	0: Success
+ *	-EINVAL: GPIO port is invalid or can't be initialized.
+ */
+static irqreturn_t pch_vbus_gpio_irq(int irq, void *data)
+{
+	struct pch_udc_dev *dev = (struct pch_udc_dev *)data;
+
+	if (!dev->vbus_gpio.port || !dev->vbus_gpio.intr)
+		return IRQ_NONE;
+
+	if (pch_vbus_gpio_get_value(dev))
+		schedule_work(&dev->vbus_gpio.irq_work_rise);
+	else
+		schedule_work(&dev->vbus_gpio.irq_work_fall);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * pch_vbus_gpio_init() - This API initializes GPIO port detecting VBUS.
+ * @dev:		Reference to the driver structure
+ *
+ * Return codes:
+ *	0: Success
+ *	-EINVAL: GPIO port is invalid or can't be initialized.
+ */
+static int pch_vbus_gpio_init(struct pch_udc_dev *dev)
+{
+	struct device *d = &dev->pdev->dev;
+	int err;
+	int irq_num = 0;
+	struct gpio_desc *gpiod;
+
+	dev->vbus_gpio.port = NULL;
+	dev->vbus_gpio.intr = 0;
+
+	/* Retrieve the GPIO line from the USB gadget device */
+	gpiod = devm_gpiod_get_optional(d, NULL, GPIOD_IN);
+	if (IS_ERR(gpiod))
+		return PTR_ERR(gpiod);
+	gpiod_set_consumer_name(gpiod, "pch_vbus");
+
+	dev->vbus_gpio.port = gpiod;
+	INIT_WORK(&dev->vbus_gpio.irq_work_fall, pch_vbus_gpio_work_fall);
+
+	irq_num = gpiod_to_irq(gpiod);
+	if (irq_num > 0) {
+		irq_set_irq_type(irq_num, IRQ_TYPE_EDGE_BOTH);
+		err = request_irq(irq_num, pch_vbus_gpio_irq, 0,
+			"vbus_detect", dev);
+		if (!err) {
+			dev->vbus_gpio.intr = irq_num;
+			INIT_WORK(&dev->vbus_gpio.irq_work_rise,
+				pch_vbus_gpio_work_rise);
+		} else {
+			pr_err("%s: can't request irq %d, err: %d\n",
+				__func__, irq_num, err);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * pch_vbus_gpio_free() - This API frees resources of GPIO port
+ * @dev:	Reference to the driver structure
+ */
+static void pch_vbus_gpio_free(struct pch_udc_dev *dev)
+{
+	if (dev->vbus_gpio.intr)
+		free_irq(dev->vbus_gpio.intr, dev);
+}
+
+/**
+ * complete_req() - This API is invoked from the driver when processing
+ *			of a request is complete
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request structure
+ * @status:	Indicates the success/failure of completion
+ */
+static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req,
+								 int status)
+	__releases(&dev->lock)
+	__acquires(&dev->lock)
+{
+	struct pch_udc_dev	*dev;
+	unsigned halted = ep->halted;
+
+	list_del_init(&req->queue);
+
+	/* set new status if pending */
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	dev = ep->dev;
+	usb_gadget_unmap_request(&dev->gadget, &req->req, ep->in);
+	ep->halted = 1;
+	spin_unlock(&dev->lock);
+	if (!ep->in)
+		pch_udc_ep_clear_rrdy(ep);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&dev->lock);
+	ep->halted = halted;
+}
+
+/**
+ * empty_req_queue() - This API empties the request queue of an endpoint
+ * @ep:		Reference to the endpoint structure
+ */
+static void empty_req_queue(struct pch_udc_ep *ep)
+{
+	struct pch_udc_request	*req;
+
+	ep->halted = 1;
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+		complete_req(ep, req, -ESHUTDOWN);	/* Remove from list */
+	}
+}
+
+/**
+ * pch_udc_free_dma_chain() - This function frees the DMA chain created
+ *				for the request
+ * @dev:	Reference to the driver structure
+ * @req:	Reference to the request to be freed
+ *
+ * Return codes:
+ *	0: Success
+ */
+static void pch_udc_free_dma_chain(struct pch_udc_dev *dev,
+				   struct pch_udc_request *req)
+{
+	struct pch_udc_data_dma_desc *td = req->td_data;
+	unsigned i = req->chain_len;
+
+	dma_addr_t addr2;
+	dma_addr_t addr = (dma_addr_t)td->next;
+	td->next = 0x00;
+	for (; i > 1; --i) {
+		/* do not free first desc., will be done by free for request */
+		td = phys_to_virt(addr);
+		addr2 = (dma_addr_t)td->next;
+		dma_pool_free(dev->data_requests, td, addr);
+		addr = addr2;
+	}
+	req->chain_len = 1;
+}
+
+/**
+ * pch_udc_create_dma_chain() - This function creates or reinitializes
+ *				a DMA chain
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request
+ * @buf_len:	The buffer length
+ * @gfp_flags:	Flags to be used while mapping the data buffer
+ *
+ * Return codes:
+ *	0:		success,
+ *	-ENOMEM:	dma_pool_alloc invocation fails
+ */
+static int pch_udc_create_dma_chain(struct pch_udc_ep *ep,
+				    struct pch_udc_request *req,
+				    unsigned long buf_len,
+				    gfp_t gfp_flags)
+{
+	struct pch_udc_data_dma_desc *td = req->td_data, *last;
+	unsigned long bytes = req->req.length, i = 0;
+	dma_addr_t dma_addr;
+	unsigned len = 1;
+
+	if (req->chain_len > 1)
+		pch_udc_free_dma_chain(ep->dev, req);
+
+	td->dataptr = req->req.dma;
+	td->status = PCH_UDC_BS_HST_BSY;
+
+	for (; ; bytes -= buf_len, ++len) {
+		td->status = PCH_UDC_BS_HST_BSY | min(buf_len, bytes);
+		if (bytes <= buf_len)
+			break;
+		last = td;
+		td = dma_pool_alloc(ep->dev->data_requests, gfp_flags,
+				    &dma_addr);
+		if (!td)
+			goto nomem;
+		i += buf_len;
+		td->dataptr = req->td_data->dataptr + i;
+		last->next = dma_addr;
+	}
+
+	req->td_data_last = td;
+	td->status |= PCH_UDC_DMA_LAST;
+	td->next = req->td_data_phys;
+	req->chain_len = len;
+	return 0;
+
+nomem:
+	if (len > 1) {
+		req->chain_len = len;
+		pch_udc_free_dma_chain(ep->dev, req);
+	}
+	req->chain_len = 1;
+	return -ENOMEM;
+}
+
+/**
+ * prepare_dma() - This function creates and initializes the DMA chain
+ *			for the request
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request
+ * @gfp:	Flag to be used while mapping the data buffer
+ *
+ * Return codes:
+ *	0:		Success
+ *	Other 0:	linux error number on failure
+ */
+static int prepare_dma(struct pch_udc_ep *ep, struct pch_udc_request *req,
+			  gfp_t gfp)
+{
+	int	retval;
+
+	/* Allocate and create a DMA chain */
+	retval = pch_udc_create_dma_chain(ep, req, ep->ep.maxpacket, gfp);
+	if (retval) {
+		pr_err("%s: could not create DMA chain:%d\n", __func__, retval);
+		return retval;
+	}
+	if (ep->in)
+		req->td_data->status = (req->td_data->status &
+				~PCH_UDC_BUFF_STS) | PCH_UDC_BS_HST_RDY;
+	return 0;
+}
+
+/**
+ * process_zlp() - This function process zero length packets
+ *			from the gadget driver
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request
+ */
+static void process_zlp(struct pch_udc_ep *ep, struct pch_udc_request *req)
+{
+	struct pch_udc_dev	*dev = ep->dev;
+
+	/* IN zlp's are handled by hardware */
+	complete_req(ep, req, 0);
+
+	/* if set_config or set_intf is waiting for ack by zlp
+	 * then set CSR_DONE
+	 */
+	if (dev->set_cfg_not_acked) {
+		pch_udc_set_csr_done(dev);
+		dev->set_cfg_not_acked = 0;
+	}
+	/* setup command is ACK'ed now by zlp */
+	if (!dev->stall && dev->waiting_zlp_ack) {
+		pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX]));
+		dev->waiting_zlp_ack = 0;
+	}
+}
+
+/**
+ * pch_udc_start_rxrequest() - This function starts the receive requirement.
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request structure
+ */
+static void pch_udc_start_rxrequest(struct pch_udc_ep *ep,
+					 struct pch_udc_request *req)
+{
+	struct pch_udc_data_dma_desc *td_data;
+
+	pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
+	td_data = req->td_data;
+	/* Set the status bits for all descriptors */
+	while (1) {
+		td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) |
+				    PCH_UDC_BS_HST_RDY;
+		if ((td_data->status & PCH_UDC_DMA_LAST) ==  PCH_UDC_DMA_LAST)
+			break;
+		td_data = phys_to_virt(td_data->next);
+	}
+	/* Write the descriptor pointer */
+	pch_udc_ep_set_ddptr(ep, req->td_data_phys);
+	req->dma_going = 1;
+	pch_udc_enable_ep_interrupts(ep->dev, UDC_EPINT_OUT_EP0 << ep->num);
+	pch_udc_set_dma(ep->dev, DMA_DIR_RX);
+	pch_udc_ep_clear_nak(ep);
+	pch_udc_ep_set_rrdy(ep);
+}
+
+/**
+ * pch_udc_pcd_ep_enable() - This API enables the endpoint. It is called
+ *				from gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @desc:	Reference to the USB endpoint descriptor structure
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:
+ *	-ESHUTDOWN:
+ */
+static int pch_udc_pcd_ep_enable(struct usb_ep *usbep,
+				    const struct usb_endpoint_descriptor *desc)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_dev	*dev;
+	unsigned long		iflags;
+
+	if (!usbep || (usbep->name == ep0_string) || !desc ||
+	    (desc->bDescriptorType != USB_DT_ENDPOINT) || !desc->wMaxPacketSize)
+		return -EINVAL;
+
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+	spin_lock_irqsave(&dev->lock, iflags);
+	ep->ep.desc = desc;
+	ep->halted = 0;
+	pch_udc_ep_enable(ep, &ep->dev->cfg_data, desc);
+	ep->ep.maxpacket = usb_endpoint_maxp(desc);
+	pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+	spin_unlock_irqrestore(&dev->lock, iflags);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_ep_disable() - This API disables endpoint and is called
+ *				from gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:
+ */
+static int pch_udc_pcd_ep_disable(struct usb_ep *usbep)
+{
+	struct pch_udc_ep	*ep;
+	unsigned long	iflags;
+
+	if (!usbep)
+		return -EINVAL;
+
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	if ((usbep->name == ep0_string) || !ep->ep.desc)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->dev->lock, iflags);
+	empty_req_queue(ep);
+	ep->halted = 1;
+	pch_udc_ep_disable(ep);
+	pch_udc_disable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+	ep->ep.desc = NULL;
+	INIT_LIST_HEAD(&ep->queue);
+	spin_unlock_irqrestore(&ep->dev->lock, iflags);
+	return 0;
+}
+
+/**
+ * pch_udc_alloc_request() - This function allocates request structure.
+ *				It is called by gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @gfp:	Flag to be used while allocating memory
+ *
+ * Return codes:
+ *	NULL:			Failure
+ *	Allocated address:	Success
+ */
+static struct usb_request *pch_udc_alloc_request(struct usb_ep *usbep,
+						  gfp_t gfp)
+{
+	struct pch_udc_request		*req;
+	struct pch_udc_ep		*ep;
+	struct pch_udc_data_dma_desc	*dma_desc;
+
+	if (!usbep)
+		return NULL;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	req = kzalloc(sizeof *req, gfp);
+	if (!req)
+		return NULL;
+	req->req.dma = DMA_ADDR_INVALID;
+	INIT_LIST_HEAD(&req->queue);
+	if (!ep->dev->dma_addr)
+		return &req->req;
+	/* ep0 in requests are allocated from data pool here */
+	dma_desc = dma_pool_alloc(ep->dev->data_requests, gfp,
+				  &req->td_data_phys);
+	if (NULL == dma_desc) {
+		kfree(req);
+		return NULL;
+	}
+	/* prevent from using desc. - set HOST BUSY */
+	dma_desc->status |= PCH_UDC_BS_HST_BSY;
+	dma_desc->dataptr = lower_32_bits(DMA_ADDR_INVALID);
+	req->td_data = dma_desc;
+	req->td_data_last = dma_desc;
+	req->chain_len = 1;
+	return &req->req;
+}
+
+/**
+ * pch_udc_free_request() - This function frees request structure.
+ *				It is called by gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @usbreq:	Reference to the USB request
+ */
+static void pch_udc_free_request(struct usb_ep *usbep,
+				  struct usb_request *usbreq)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_request	*req;
+	struct pch_udc_dev	*dev;
+
+	if (!usbep || !usbreq)
+		return;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	req = container_of(usbreq, struct pch_udc_request, req);
+	dev = ep->dev;
+	if (!list_empty(&req->queue))
+		dev_err(&dev->pdev->dev, "%s: %s req=0x%p queue not empty\n",
+			__func__, usbep->name, req);
+	if (req->td_data != NULL) {
+		if (req->chain_len > 1)
+			pch_udc_free_dma_chain(ep->dev, req);
+		dma_pool_free(ep->dev->data_requests, req->td_data,
+			      req->td_data_phys);
+	}
+	kfree(req);
+}
+
+/**
+ * pch_udc_pcd_queue() - This function queues a request packet. It is called
+ *			by gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @usbreq:	Reference to the USB request
+ * @gfp:	Flag to be used while mapping the data buffer
+ *
+ * Return codes:
+ *	0:			Success
+ *	linux error number:	Failure
+ */
+static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
+								 gfp_t gfp)
+{
+	int retval = 0;
+	struct pch_udc_ep	*ep;
+	struct pch_udc_dev	*dev;
+	struct pch_udc_request	*req;
+	unsigned long	iflags;
+
+	if (!usbep || !usbreq || !usbreq->complete || !usbreq->buf)
+		return -EINVAL;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	if (!ep->ep.desc && ep->num)
+		return -EINVAL;
+	req = container_of(usbreq, struct pch_udc_request, req);
+	if (!list_empty(&req->queue))
+		return -EINVAL;
+	if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+	spin_lock_irqsave(&dev->lock, iflags);
+	/* map the buffer for dma */
+	retval = usb_gadget_map_request(&dev->gadget, usbreq, ep->in);
+	if (retval)
+		goto probe_end;
+	if (usbreq->length > 0) {
+		retval = prepare_dma(ep, req, GFP_ATOMIC);
+		if (retval)
+			goto probe_end;
+	}
+	usbreq->actual = 0;
+	usbreq->status = -EINPROGRESS;
+	req->dma_done = 0;
+	if (list_empty(&ep->queue) && !ep->halted) {
+		/* no pending transfer, so start this req */
+		if (!usbreq->length) {
+			process_zlp(ep, req);
+			retval = 0;
+			goto probe_end;
+		}
+		if (!ep->in) {
+			pch_udc_start_rxrequest(ep, req);
+		} else {
+			/*
+			* For IN trfr the descriptors will be programmed and
+			* P bit will be set when
+			* we get an IN token
+			*/
+			pch_udc_wait_ep_stall(ep);
+			pch_udc_ep_clear_nak(ep);
+			pch_udc_enable_ep_interrupts(ep->dev, (1 << ep->num));
+		}
+	}
+	/* Now add this request to the ep's pending requests */
+	if (req != NULL)
+		list_add_tail(&req->queue, &ep->queue);
+
+probe_end:
+	spin_unlock_irqrestore(&dev->lock, iflags);
+	return retval;
+}
+
+/**
+ * pch_udc_pcd_dequeue() - This function de-queues a request packet.
+ *				It is called by gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @usbreq:	Reference to the USB request
+ *
+ * Return codes:
+ *	0:			Success
+ *	linux error number:	Failure
+ */
+static int pch_udc_pcd_dequeue(struct usb_ep *usbep,
+				struct usb_request *usbreq)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_request	*req;
+	unsigned long		flags;
+	int ret = -EINVAL;
+
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	if (!usbep || !usbreq || (!ep->ep.desc && ep->num))
+		return ret;
+	req = container_of(usbreq, struct pch_udc_request, req);
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	/* make sure it's still queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == usbreq) {
+			pch_udc_ep_set_nak(ep);
+			if (!list_empty(&req->queue))
+				complete_req(ep, req, -ECONNRESET);
+			ret = 0;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+	return ret;
+}
+
+/**
+ * pch_udc_pcd_set_halt() - This function Sets or clear the endpoint halt
+ *			    feature
+ * @usbep:	Reference to the USB endpoint structure
+ * @halt:	Specifies whether to set or clear the feature
+ *
+ * Return codes:
+ *	0:			Success
+ *	linux error number:	Failure
+ */
+static int pch_udc_pcd_set_halt(struct usb_ep *usbep, int halt)
+{
+	struct pch_udc_ep	*ep;
+	unsigned long iflags;
+	int ret;
+
+	if (!usbep)
+		return -EINVAL;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	if (!ep->ep.desc && !ep->num)
+		return -EINVAL;
+	if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+	spin_lock_irqsave(&udc_stall_spinlock, iflags);
+	if (list_empty(&ep->queue)) {
+		if (halt) {
+			if (ep->num == PCH_UDC_EP0)
+				ep->dev->stall = 1;
+			pch_udc_ep_set_stall(ep);
+			pch_udc_enable_ep_interrupts(
+				ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+		} else {
+			pch_udc_ep_clear_stall(ep);
+		}
+		ret = 0;
+	} else {
+		ret = -EAGAIN;
+	}
+	spin_unlock_irqrestore(&udc_stall_spinlock, iflags);
+	return ret;
+}
+
+/**
+ * pch_udc_pcd_set_wedge() - This function Sets or clear the endpoint
+ *				halt feature
+ * @usbep:	Reference to the USB endpoint structure
+ *
+ * Return codes:
+ *	0:			Success
+ *	linux error number:	Failure
+ */
+static int pch_udc_pcd_set_wedge(struct usb_ep *usbep)
+{
+	struct pch_udc_ep	*ep;
+	unsigned long iflags;
+	int ret;
+
+	if (!usbep)
+		return -EINVAL;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	if (!ep->ep.desc && !ep->num)
+		return -EINVAL;
+	if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+	spin_lock_irqsave(&udc_stall_spinlock, iflags);
+	if (!list_empty(&ep->queue)) {
+		ret = -EAGAIN;
+	} else {
+		if (ep->num == PCH_UDC_EP0)
+			ep->dev->stall = 1;
+		pch_udc_ep_set_stall(ep);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+		ep->dev->prot_stall = 1;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&udc_stall_spinlock, iflags);
+	return ret;
+}
+
+/**
+ * pch_udc_pcd_fifo_flush() - This function Flush the FIFO of specified endpoint
+ * @usbep:	Reference to the USB endpoint structure
+ */
+static void pch_udc_pcd_fifo_flush(struct usb_ep *usbep)
+{
+	struct pch_udc_ep  *ep;
+
+	if (!usbep)
+		return;
+
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	if (ep->ep.desc || !ep->num)
+		pch_udc_ep_fifo_flush(ep, ep->in);
+}
+
+static const struct usb_ep_ops pch_udc_ep_ops = {
+	.enable		= pch_udc_pcd_ep_enable,
+	.disable	= pch_udc_pcd_ep_disable,
+	.alloc_request	= pch_udc_alloc_request,
+	.free_request	= pch_udc_free_request,
+	.queue		= pch_udc_pcd_queue,
+	.dequeue	= pch_udc_pcd_dequeue,
+	.set_halt	= pch_udc_pcd_set_halt,
+	.set_wedge	= pch_udc_pcd_set_wedge,
+	.fifo_status	= NULL,
+	.fifo_flush	= pch_udc_pcd_fifo_flush,
+};
+
+/**
+ * pch_udc_init_setup_buff() - This function initializes the SETUP buffer
+ * @td_stp:	Reference to the SETP buffer structure
+ */
+static void pch_udc_init_setup_buff(struct pch_udc_stp_dma_desc *td_stp)
+{
+	static u32	pky_marker;
+
+	if (!td_stp)
+		return;
+	td_stp->reserved = ++pky_marker;
+	memset(&td_stp->request, 0xFF, sizeof td_stp->request);
+	td_stp->status = PCH_UDC_BS_HST_RDY;
+}
+
+/**
+ * pch_udc_start_next_txrequest() - This function starts
+ *					the next transmission requirement
+ * @ep:	Reference to the endpoint structure
+ */
+static void pch_udc_start_next_txrequest(struct pch_udc_ep *ep)
+{
+	struct pch_udc_request *req;
+	struct pch_udc_data_dma_desc *td_data;
+
+	if (pch_udc_read_ep_control(ep) & UDC_EPCTL_P)
+		return;
+
+	if (list_empty(&ep->queue))
+		return;
+
+	/* next request */
+	req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+	if (req->dma_going)
+		return;
+	if (!req->td_data)
+		return;
+	pch_udc_wait_ep_stall(ep);
+	req->dma_going = 1;
+	pch_udc_ep_set_ddptr(ep, 0);
+	td_data = req->td_data;
+	while (1) {
+		td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) |
+				   PCH_UDC_BS_HST_RDY;
+		if ((td_data->status & PCH_UDC_DMA_LAST) == PCH_UDC_DMA_LAST)
+			break;
+		td_data = phys_to_virt(td_data->next);
+	}
+	pch_udc_ep_set_ddptr(ep, req->td_data_phys);
+	pch_udc_set_dma(ep->dev, DMA_DIR_TX);
+	pch_udc_ep_set_pd(ep);
+	pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+	pch_udc_ep_clear_nak(ep);
+}
+
+/**
+ * pch_udc_complete_transfer() - This function completes a transfer
+ * @ep:		Reference to the endpoint structure
+ */
+static void pch_udc_complete_transfer(struct pch_udc_ep *ep)
+{
+	struct pch_udc_request *req;
+	struct pch_udc_dev *dev = ep->dev;
+
+	if (list_empty(&ep->queue))
+		return;
+	req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+	if ((req->td_data_last->status & PCH_UDC_BUFF_STS) !=
+	    PCH_UDC_BS_DMA_DONE)
+		return;
+	if ((req->td_data_last->status & PCH_UDC_RXTX_STS) !=
+	     PCH_UDC_RTS_SUCC) {
+		dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) "
+			"epstatus=0x%08x\n",
+		       (req->td_data_last->status & PCH_UDC_RXTX_STS),
+		       (int)(ep->epsts));
+		return;
+	}
+
+	req->req.actual = req->req.length;
+	req->td_data_last->status = PCH_UDC_BS_HST_BSY | PCH_UDC_DMA_LAST;
+	req->td_data->status = PCH_UDC_BS_HST_BSY | PCH_UDC_DMA_LAST;
+	complete_req(ep, req, 0);
+	req->dma_going = 0;
+	if (!list_empty(&ep->queue)) {
+		pch_udc_wait_ep_stall(ep);
+		pch_udc_ep_clear_nak(ep);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+	} else {
+		pch_udc_disable_ep_interrupts(ep->dev,
+					      PCH_UDC_EPINT(ep->in, ep->num));
+	}
+}
+
+/**
+ * pch_udc_complete_receiver() - This function completes a receiver
+ * @ep:		Reference to the endpoint structure
+ */
+static void pch_udc_complete_receiver(struct pch_udc_ep *ep)
+{
+	struct pch_udc_request *req;
+	struct pch_udc_dev *dev = ep->dev;
+	unsigned int count;
+	struct pch_udc_data_dma_desc *td;
+	dma_addr_t addr;
+
+	if (list_empty(&ep->queue))
+		return;
+	/* next request */
+	req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+	pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
+	pch_udc_ep_set_ddptr(ep, 0);
+	if ((req->td_data_last->status & PCH_UDC_BUFF_STS) ==
+	    PCH_UDC_BS_DMA_DONE)
+		td = req->td_data_last;
+	else
+		td = req->td_data;
+
+	while (1) {
+		if ((td->status & PCH_UDC_RXTX_STS) != PCH_UDC_RTS_SUCC) {
+			dev_err(&dev->pdev->dev, "Invalid RXTX status=0x%08x "
+				"epstatus=0x%08x\n",
+				(req->td_data->status & PCH_UDC_RXTX_STS),
+				(int)(ep->epsts));
+			return;
+		}
+		if ((td->status & PCH_UDC_BUFF_STS) == PCH_UDC_BS_DMA_DONE)
+			if (td->status & PCH_UDC_DMA_LAST) {
+				count = td->status & PCH_UDC_RXTX_BYTES;
+				break;
+			}
+		if (td == req->td_data_last) {
+			dev_err(&dev->pdev->dev, "Not complete RX descriptor");
+			return;
+		}
+		addr = (dma_addr_t)td->next;
+		td = phys_to_virt(addr);
+	}
+	/* on 64k packets the RXBYTES field is zero */
+	if (!count && (req->req.length == UDC_DMA_MAXPACKET))
+		count = UDC_DMA_MAXPACKET;
+	req->td_data->status |= PCH_UDC_DMA_LAST;
+	td->status |= PCH_UDC_BS_HST_BSY;
+
+	req->dma_going = 0;
+	req->req.actual = count;
+	complete_req(ep, req, 0);
+	/* If there is a new/failed requests try that now */
+	if (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+		pch_udc_start_rxrequest(ep, req);
+	}
+}
+
+/**
+ * pch_udc_svc_data_in() - This function process endpoint interrupts
+ *				for IN endpoints
+ * @dev:	Reference to the device structure
+ * @ep_num:	Endpoint that generated the interrupt
+ */
+static void pch_udc_svc_data_in(struct pch_udc_dev *dev, int ep_num)
+{
+	u32	epsts;
+	struct pch_udc_ep	*ep;
+
+	ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
+	epsts = ep->epsts;
+	ep->epsts = 0;
+
+	if (!(epsts & (UDC_EPSTS_IN | UDC_EPSTS_BNA  | UDC_EPSTS_HE |
+		       UDC_EPSTS_TDC | UDC_EPSTS_RCS | UDC_EPSTS_TXEMPTY |
+		       UDC_EPSTS_RSS | UDC_EPSTS_XFERDONE)))
+		return;
+	if ((epsts & UDC_EPSTS_BNA))
+		return;
+	if (epsts & UDC_EPSTS_HE)
+		return;
+	if (epsts & UDC_EPSTS_RSS) {
+		pch_udc_ep_set_stall(ep);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+	}
+	if (epsts & UDC_EPSTS_RCS) {
+		if (!dev->prot_stall) {
+			pch_udc_ep_clear_stall(ep);
+		} else {
+			pch_udc_ep_set_stall(ep);
+			pch_udc_enable_ep_interrupts(ep->dev,
+						PCH_UDC_EPINT(ep->in, ep->num));
+		}
+	}
+	if (epsts & UDC_EPSTS_TDC)
+		pch_udc_complete_transfer(ep);
+	/* On IN interrupt, provide data if we have any */
+	if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_RSS) &&
+	    !(epsts & UDC_EPSTS_TDC) && !(epsts & UDC_EPSTS_TXEMPTY))
+		pch_udc_start_next_txrequest(ep);
+}
+
+/**
+ * pch_udc_svc_data_out() - Handles interrupts from OUT endpoint
+ * @dev:	Reference to the device structure
+ * @ep_num:	Endpoint that generated the interrupt
+ */
+static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
+{
+	u32			epsts;
+	struct pch_udc_ep		*ep;
+	struct pch_udc_request		*req = NULL;
+
+	ep = &dev->ep[UDC_EPOUT_IDX(ep_num)];
+	epsts = ep->epsts;
+	ep->epsts = 0;
+
+	if ((epsts & UDC_EPSTS_BNA) && (!list_empty(&ep->queue))) {
+		/* next request */
+		req = list_entry(ep->queue.next, struct pch_udc_request,
+				 queue);
+		if ((req->td_data_last->status & PCH_UDC_BUFF_STS) !=
+		     PCH_UDC_BS_DMA_DONE) {
+			if (!req->dma_going)
+				pch_udc_start_rxrequest(ep, req);
+			return;
+		}
+	}
+	if (epsts & UDC_EPSTS_HE)
+		return;
+	if (epsts & UDC_EPSTS_RSS) {
+		pch_udc_ep_set_stall(ep);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+	}
+	if (epsts & UDC_EPSTS_RCS) {
+		if (!dev->prot_stall) {
+			pch_udc_ep_clear_stall(ep);
+		} else {
+			pch_udc_ep_set_stall(ep);
+			pch_udc_enable_ep_interrupts(ep->dev,
+						PCH_UDC_EPINT(ep->in, ep->num));
+		}
+	}
+	if (((epsts & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
+	    UDC_EPSTS_OUT_DATA) {
+		if (ep->dev->prot_stall == 1) {
+			pch_udc_ep_set_stall(ep);
+			pch_udc_enable_ep_interrupts(ep->dev,
+						PCH_UDC_EPINT(ep->in, ep->num));
+		} else {
+			pch_udc_complete_receiver(ep);
+		}
+	}
+	if (list_empty(&ep->queue))
+		pch_udc_set_dma(dev, DMA_DIR_RX);
+}
+
+static int pch_udc_gadget_setup(struct pch_udc_dev *dev)
+	__must_hold(&dev->lock)
+{
+	int rc;
+
+	/* In some cases we can get an interrupt before driver gets setup */
+	if (!dev->driver)
+		return -ESHUTDOWN;
+
+	spin_unlock(&dev->lock);
+	rc = dev->driver->setup(&dev->gadget, &dev->setup_data);
+	spin_lock(&dev->lock);
+	return rc;
+}
+
+/**
+ * pch_udc_svc_control_in() - Handle Control IN endpoint interrupts
+ * @dev:	Reference to the device structure
+ */
+static void pch_udc_svc_control_in(struct pch_udc_dev *dev)
+{
+	u32	epsts;
+	struct pch_udc_ep	*ep;
+	struct pch_udc_ep	*ep_out;
+
+	ep = &dev->ep[UDC_EP0IN_IDX];
+	ep_out = &dev->ep[UDC_EP0OUT_IDX];
+	epsts = ep->epsts;
+	ep->epsts = 0;
+
+	if (!(epsts & (UDC_EPSTS_IN | UDC_EPSTS_BNA | UDC_EPSTS_HE |
+		       UDC_EPSTS_TDC | UDC_EPSTS_RCS | UDC_EPSTS_TXEMPTY |
+		       UDC_EPSTS_XFERDONE)))
+		return;
+	if ((epsts & UDC_EPSTS_BNA))
+		return;
+	if (epsts & UDC_EPSTS_HE)
+		return;
+	if ((epsts & UDC_EPSTS_TDC) && (!dev->stall)) {
+		pch_udc_complete_transfer(ep);
+		pch_udc_clear_dma(dev, DMA_DIR_RX);
+		ep_out->td_data->status = (ep_out->td_data->status &
+					~PCH_UDC_BUFF_STS) |
+					PCH_UDC_BS_HST_RDY;
+		pch_udc_ep_clear_nak(ep_out);
+		pch_udc_set_dma(dev, DMA_DIR_RX);
+		pch_udc_ep_set_rrdy(ep_out);
+	}
+	/* On IN interrupt, provide data if we have any */
+	if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_TDC) &&
+	     !(epsts & UDC_EPSTS_TXEMPTY))
+		pch_udc_start_next_txrequest(ep);
+}
+
+/**
+ * pch_udc_svc_control_out() - Routine that handle Control
+ *					OUT endpoint interrupts
+ * @dev:	Reference to the device structure
+ */
+static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
+	__releases(&dev->lock)
+	__acquires(&dev->lock)
+{
+	u32	stat;
+	int setup_supported;
+	struct pch_udc_ep	*ep;
+
+	ep = &dev->ep[UDC_EP0OUT_IDX];
+	stat = ep->epsts;
+	ep->epsts = 0;
+
+	/* If setup data */
+	if (((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
+	    UDC_EPSTS_OUT_SETUP) {
+		dev->stall = 0;
+		dev->ep[UDC_EP0IN_IDX].halted = 0;
+		dev->ep[UDC_EP0OUT_IDX].halted = 0;
+		dev->setup_data = ep->td_stp->request;
+		pch_udc_init_setup_buff(ep->td_stp);
+		pch_udc_clear_dma(dev, DMA_DIR_RX);
+		pch_udc_ep_fifo_flush(&(dev->ep[UDC_EP0IN_IDX]),
+				      dev->ep[UDC_EP0IN_IDX].in);
+		if ((dev->setup_data.bRequestType & USB_DIR_IN))
+			dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep;
+		else /* OUT */
+			dev->gadget.ep0 = &ep->ep;
+		/* If Mass storage Reset */
+		if ((dev->setup_data.bRequestType == 0x21) &&
+		    (dev->setup_data.bRequest == 0xFF))
+			dev->prot_stall = 0;
+		/* call gadget with setup data received */
+		setup_supported = pch_udc_gadget_setup(dev);
+
+		if (dev->setup_data.bRequestType & USB_DIR_IN) {
+			ep->td_data->status = (ep->td_data->status &
+						~PCH_UDC_BUFF_STS) |
+						PCH_UDC_BS_HST_RDY;
+			pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
+		}
+		/* ep0 in returns data on IN phase */
+		if (setup_supported >= 0 && setup_supported <
+					    UDC_EP0IN_MAX_PKT_SIZE) {
+			pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX]));
+			/* Gadget would have queued a request when
+			 * we called the setup */
+			if (!(dev->setup_data.bRequestType & USB_DIR_IN)) {
+				pch_udc_set_dma(dev, DMA_DIR_RX);
+				pch_udc_ep_clear_nak(ep);
+			}
+		} else if (setup_supported < 0) {
+			/* if unsupported request, then stall */
+			pch_udc_ep_set_stall(&(dev->ep[UDC_EP0IN_IDX]));
+			pch_udc_enable_ep_interrupts(ep->dev,
+						PCH_UDC_EPINT(ep->in, ep->num));
+			dev->stall = 0;
+			pch_udc_set_dma(dev, DMA_DIR_RX);
+		} else {
+			dev->waiting_zlp_ack = 1;
+		}
+	} else if ((((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
+		     UDC_EPSTS_OUT_DATA) && !dev->stall) {
+		pch_udc_clear_dma(dev, DMA_DIR_RX);
+		pch_udc_ep_set_ddptr(ep, 0);
+		if (!list_empty(&ep->queue)) {
+			ep->epsts = stat;
+			pch_udc_svc_data_out(dev, PCH_UDC_EP0);
+		}
+		pch_udc_set_dma(dev, DMA_DIR_RX);
+	}
+	pch_udc_ep_set_rrdy(ep);
+}
+
+
+/**
+ * pch_udc_postsvc_epinters() - This function enables end point interrupts
+ *				and clears NAK status
+ * @dev:	Reference to the device structure
+ * @ep_num:	End point number
+ */
+static void pch_udc_postsvc_epinters(struct pch_udc_dev *dev, int ep_num)
+{
+	struct pch_udc_ep	*ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
+	if (list_empty(&ep->queue))
+		return;
+	pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+	pch_udc_ep_clear_nak(ep);
+}
+
+/**
+ * pch_udc_read_all_epstatus() - This function read all endpoint status
+ * @dev:	Reference to the device structure
+ * @ep_intr:	Status of endpoint interrupt
+ */
+static void pch_udc_read_all_epstatus(struct pch_udc_dev *dev, u32 ep_intr)
+{
+	int i;
+	struct pch_udc_ep	*ep;
+
+	for (i = 0; i < PCH_UDC_USED_EP_NUM; i++) {
+		/* IN */
+		if (ep_intr & (0x1 << i)) {
+			ep = &dev->ep[UDC_EPIN_IDX(i)];
+			ep->epsts = pch_udc_read_ep_status(ep);
+			pch_udc_clear_ep_status(ep, ep->epsts);
+		}
+		/* OUT */
+		if (ep_intr & (0x10000 << i)) {
+			ep = &dev->ep[UDC_EPOUT_IDX(i)];
+			ep->epsts = pch_udc_read_ep_status(ep);
+			pch_udc_clear_ep_status(ep, ep->epsts);
+		}
+	}
+}
+
+/**
+ * pch_udc_activate_control_ep() - This function enables the control endpoints
+ *					for traffic after a reset
+ * @dev:	Reference to the device structure
+ */
+static void pch_udc_activate_control_ep(struct pch_udc_dev *dev)
+{
+	struct pch_udc_ep	*ep;
+	u32 val;
+
+	/* Setup the IN endpoint */
+	ep = &dev->ep[UDC_EP0IN_IDX];
+	pch_udc_clear_ep_control(ep);
+	pch_udc_ep_fifo_flush(ep, ep->in);
+	pch_udc_ep_set_bufsz(ep, UDC_EP0IN_BUFF_SIZE, ep->in);
+	pch_udc_ep_set_maxpkt(ep, UDC_EP0IN_MAX_PKT_SIZE);
+	/* Initialize the IN EP Descriptor */
+	ep->td_data      = NULL;
+	ep->td_stp       = NULL;
+	ep->td_data_phys = 0;
+	ep->td_stp_phys  = 0;
+
+	/* Setup the OUT endpoint */
+	ep = &dev->ep[UDC_EP0OUT_IDX];
+	pch_udc_clear_ep_control(ep);
+	pch_udc_ep_fifo_flush(ep, ep->in);
+	pch_udc_ep_set_bufsz(ep, UDC_EP0OUT_BUFF_SIZE, ep->in);
+	pch_udc_ep_set_maxpkt(ep, UDC_EP0OUT_MAX_PKT_SIZE);
+	val = UDC_EP0OUT_MAX_PKT_SIZE << UDC_CSR_NE_MAX_PKT_SHIFT;
+	pch_udc_write_csr(ep->dev, val, UDC_EP0OUT_IDX);
+
+	/* Initialize the SETUP buffer */
+	pch_udc_init_setup_buff(ep->td_stp);
+	/* Write the pointer address of dma descriptor */
+	pch_udc_ep_set_subptr(ep, ep->td_stp_phys);
+	/* Write the pointer address of Setup descriptor */
+	pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
+
+	/* Initialize the dma descriptor */
+	ep->td_data->status  = PCH_UDC_DMA_LAST;
+	ep->td_data->dataptr = dev->dma_addr;
+	ep->td_data->next    = ep->td_data_phys;
+
+	pch_udc_ep_clear_nak(ep);
+}
+
+
+/**
+ * pch_udc_svc_ur_interrupt() - This function handles a USB reset interrupt
+ * @dev:	Reference to driver structure
+ */
+static void pch_udc_svc_ur_interrupt(struct pch_udc_dev *dev)
+{
+	struct pch_udc_ep	*ep;
+	int i;
+
+	pch_udc_clear_dma(dev, DMA_DIR_TX);
+	pch_udc_clear_dma(dev, DMA_DIR_RX);
+	/* Mask all endpoint interrupts */
+	pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+	/* clear all endpoint interrupts */
+	pch_udc_write_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+
+	for (i = 0; i < PCH_UDC_EP_NUM; i++) {
+		ep = &dev->ep[i];
+		pch_udc_clear_ep_status(ep, UDC_EPSTS_ALL_CLR_MASK);
+		pch_udc_clear_ep_control(ep);
+		pch_udc_ep_set_ddptr(ep, 0);
+		pch_udc_write_csr(ep->dev, 0x00, i);
+	}
+	dev->stall = 0;
+	dev->prot_stall = 0;
+	dev->waiting_zlp_ack = 0;
+	dev->set_cfg_not_acked = 0;
+
+	/* disable ep to empty req queue. Skip the control EP's */
+	for (i = 0; i < (PCH_UDC_USED_EP_NUM*2); i++) {
+		ep = &dev->ep[i];
+		pch_udc_ep_set_nak(ep);
+		pch_udc_ep_fifo_flush(ep, ep->in);
+		/* Complete request queue */
+		empty_req_queue(ep);
+	}
+	if (dev->driver) {
+		spin_unlock(&dev->lock);
+		usb_gadget_udc_reset(&dev->gadget, dev->driver);
+		spin_lock(&dev->lock);
+	}
+}
+
+/**
+ * pch_udc_svc_enum_interrupt() - This function handles a USB speed enumeration
+ *				done interrupt
+ * @dev:	Reference to driver structure
+ */
+static void pch_udc_svc_enum_interrupt(struct pch_udc_dev *dev)
+{
+	u32 dev_stat, dev_speed;
+	u32 speed = USB_SPEED_FULL;
+
+	dev_stat = pch_udc_read_device_status(dev);
+	dev_speed = (dev_stat & UDC_DEVSTS_ENUM_SPEED_MASK) >>
+						 UDC_DEVSTS_ENUM_SPEED_SHIFT;
+	switch (dev_speed) {
+	case UDC_DEVSTS_ENUM_SPEED_HIGH:
+		speed = USB_SPEED_HIGH;
+		break;
+	case  UDC_DEVSTS_ENUM_SPEED_FULL:
+		speed = USB_SPEED_FULL;
+		break;
+	case  UDC_DEVSTS_ENUM_SPEED_LOW:
+		speed = USB_SPEED_LOW;
+		break;
+	default:
+		BUG();
+	}
+	dev->gadget.speed = speed;
+	pch_udc_activate_control_ep(dev);
+	pch_udc_enable_ep_interrupts(dev, UDC_EPINT_IN_EP0 | UDC_EPINT_OUT_EP0);
+	pch_udc_set_dma(dev, DMA_DIR_TX);
+	pch_udc_set_dma(dev, DMA_DIR_RX);
+	pch_udc_ep_set_rrdy(&(dev->ep[UDC_EP0OUT_IDX]));
+
+	/* enable device interrupts */
+	pch_udc_enable_interrupts(dev, UDC_DEVINT_UR | UDC_DEVINT_US |
+					UDC_DEVINT_ES | UDC_DEVINT_ENUM |
+					UDC_DEVINT_SI | UDC_DEVINT_SC);
+}
+
+/**
+ * pch_udc_svc_intf_interrupt() - This function handles a set interface
+ *				  interrupt
+ * @dev:	Reference to driver structure
+ */
+static void pch_udc_svc_intf_interrupt(struct pch_udc_dev *dev)
+{
+	u32 reg, dev_stat = 0;
+	int i;
+
+	dev_stat = pch_udc_read_device_status(dev);
+	dev->cfg_data.cur_intf = (dev_stat & UDC_DEVSTS_INTF_MASK) >>
+							 UDC_DEVSTS_INTF_SHIFT;
+	dev->cfg_data.cur_alt = (dev_stat & UDC_DEVSTS_ALT_MASK) >>
+							 UDC_DEVSTS_ALT_SHIFT;
+	dev->set_cfg_not_acked = 1;
+	/* Construct the usb request for gadget driver and inform it */
+	memset(&dev->setup_data, 0 , sizeof dev->setup_data);
+	dev->setup_data.bRequest = USB_REQ_SET_INTERFACE;
+	dev->setup_data.bRequestType = USB_RECIP_INTERFACE;
+	dev->setup_data.wValue = cpu_to_le16(dev->cfg_data.cur_alt);
+	dev->setup_data.wIndex = cpu_to_le16(dev->cfg_data.cur_intf);
+	/* programm the Endpoint Cfg registers */
+	/* Only one end point cfg register */
+	reg = pch_udc_read_csr(dev, UDC_EP0OUT_IDX);
+	reg = (reg & ~UDC_CSR_NE_INTF_MASK) |
+	      (dev->cfg_data.cur_intf << UDC_CSR_NE_INTF_SHIFT);
+	reg = (reg & ~UDC_CSR_NE_ALT_MASK) |
+	      (dev->cfg_data.cur_alt << UDC_CSR_NE_ALT_SHIFT);
+	pch_udc_write_csr(dev, reg, UDC_EP0OUT_IDX);
+	for (i = 0; i < PCH_UDC_USED_EP_NUM * 2; i++) {
+		/* clear stall bits */
+		pch_udc_ep_clear_stall(&(dev->ep[i]));
+		dev->ep[i].halted = 0;
+	}
+	dev->stall = 0;
+	pch_udc_gadget_setup(dev);
+}
+
+/**
+ * pch_udc_svc_cfg_interrupt() - This function handles a set configuration
+ *				interrupt
+ * @dev:	Reference to driver structure
+ */
+static void pch_udc_svc_cfg_interrupt(struct pch_udc_dev *dev)
+{
+	int i;
+	u32 reg, dev_stat = 0;
+
+	dev_stat = pch_udc_read_device_status(dev);
+	dev->set_cfg_not_acked = 1;
+	dev->cfg_data.cur_cfg = (dev_stat & UDC_DEVSTS_CFG_MASK) >>
+				UDC_DEVSTS_CFG_SHIFT;
+	/* make usb request for gadget driver */
+	memset(&dev->setup_data, 0 , sizeof dev->setup_data);
+	dev->setup_data.bRequest = USB_REQ_SET_CONFIGURATION;
+	dev->setup_data.wValue = cpu_to_le16(dev->cfg_data.cur_cfg);
+	/* program the NE registers */
+	/* Only one end point cfg register */
+	reg = pch_udc_read_csr(dev, UDC_EP0OUT_IDX);
+	reg = (reg & ~UDC_CSR_NE_CFG_MASK) |
+	      (dev->cfg_data.cur_cfg << UDC_CSR_NE_CFG_SHIFT);
+	pch_udc_write_csr(dev, reg, UDC_EP0OUT_IDX);
+	for (i = 0; i < PCH_UDC_USED_EP_NUM * 2; i++) {
+		/* clear stall bits */
+		pch_udc_ep_clear_stall(&(dev->ep[i]));
+		dev->ep[i].halted = 0;
+	}
+	dev->stall = 0;
+
+	/* call gadget zero with setup data received */
+	pch_udc_gadget_setup(dev);
+}
+
+/**
+ * pch_udc_dev_isr() - This function services device interrupts
+ *			by invoking appropriate routines.
+ * @dev:	Reference to the device structure
+ * @dev_intr:	The Device interrupt status.
+ */
+static void pch_udc_dev_isr(struct pch_udc_dev *dev, u32 dev_intr)
+{
+	int vbus;
+
+	/* USB Reset Interrupt */
+	if (dev_intr & UDC_DEVINT_UR) {
+		pch_udc_svc_ur_interrupt(dev);
+		dev_dbg(&dev->pdev->dev, "USB_RESET\n");
+	}
+	/* Enumeration Done Interrupt */
+	if (dev_intr & UDC_DEVINT_ENUM) {
+		pch_udc_svc_enum_interrupt(dev);
+		dev_dbg(&dev->pdev->dev, "USB_ENUM\n");
+	}
+	/* Set Interface Interrupt */
+	if (dev_intr & UDC_DEVINT_SI)
+		pch_udc_svc_intf_interrupt(dev);
+	/* Set Config Interrupt */
+	if (dev_intr & UDC_DEVINT_SC)
+		pch_udc_svc_cfg_interrupt(dev);
+	/* USB Suspend interrupt */
+	if (dev_intr & UDC_DEVINT_US) {
+		if (dev->driver
+			&& dev->driver->suspend) {
+			spin_unlock(&dev->lock);
+			dev->driver->suspend(&dev->gadget);
+			spin_lock(&dev->lock);
+		}
+
+		vbus = pch_vbus_gpio_get_value(dev);
+		if ((dev->vbus_session == 0)
+			&& (vbus != 1)) {
+			if (dev->driver && dev->driver->disconnect) {
+				spin_unlock(&dev->lock);
+				dev->driver->disconnect(&dev->gadget);
+				spin_lock(&dev->lock);
+			}
+			pch_udc_reconnect(dev);
+		} else if ((dev->vbus_session == 0)
+			&& (vbus == 1)
+			&& !dev->vbus_gpio.intr)
+			schedule_work(&dev->vbus_gpio.irq_work_fall);
+
+		dev_dbg(&dev->pdev->dev, "USB_SUSPEND\n");
+	}
+	/* Clear the SOF interrupt, if enabled */
+	if (dev_intr & UDC_DEVINT_SOF)
+		dev_dbg(&dev->pdev->dev, "SOF\n");
+	/* ES interrupt, IDLE > 3ms on the USB */
+	if (dev_intr & UDC_DEVINT_ES)
+		dev_dbg(&dev->pdev->dev, "ES\n");
+	/* RWKP interrupt */
+	if (dev_intr & UDC_DEVINT_RWKP)
+		dev_dbg(&dev->pdev->dev, "RWKP\n");
+}
+
+/**
+ * pch_udc_isr() - This function handles interrupts from the PCH USB Device
+ * @irq:	Interrupt request number
+ * @pdev:	Reference to the device structure
+ */
+static irqreturn_t pch_udc_isr(int irq, void *pdev)
+{
+	struct pch_udc_dev *dev = (struct pch_udc_dev *) pdev;
+	u32 dev_intr, ep_intr;
+	int i;
+
+	dev_intr = pch_udc_read_device_interrupts(dev);
+	ep_intr = pch_udc_read_ep_interrupts(dev);
+
+	/* For a hot plug, this find that the controller is hung up. */
+	if (dev_intr == ep_intr)
+		if (dev_intr == pch_udc_readl(dev, UDC_DEVCFG_ADDR)) {
+			dev_dbg(&dev->pdev->dev, "UDC: Hung up\n");
+			/* The controller is reset */
+			pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
+			return IRQ_HANDLED;
+		}
+	if (dev_intr)
+		/* Clear device interrupts */
+		pch_udc_write_device_interrupts(dev, dev_intr);
+	if (ep_intr)
+		/* Clear ep interrupts */
+		pch_udc_write_ep_interrupts(dev, ep_intr);
+	if (!dev_intr && !ep_intr)
+		return IRQ_NONE;
+	spin_lock(&dev->lock);
+	if (dev_intr)
+		pch_udc_dev_isr(dev, dev_intr);
+	if (ep_intr) {
+		pch_udc_read_all_epstatus(dev, ep_intr);
+		/* Process Control In interrupts, if present */
+		if (ep_intr & UDC_EPINT_IN_EP0) {
+			pch_udc_svc_control_in(dev);
+			pch_udc_postsvc_epinters(dev, 0);
+		}
+		/* Process Control Out interrupts, if present */
+		if (ep_intr & UDC_EPINT_OUT_EP0)
+			pch_udc_svc_control_out(dev);
+		/* Process data in end point interrupts */
+		for (i = 1; i < PCH_UDC_USED_EP_NUM; i++) {
+			if (ep_intr & (1 <<  i)) {
+				pch_udc_svc_data_in(dev, i);
+				pch_udc_postsvc_epinters(dev, i);
+			}
+		}
+		/* Process data out end point interrupts */
+		for (i = UDC_EPINT_OUT_SHIFT + 1; i < (UDC_EPINT_OUT_SHIFT +
+						 PCH_UDC_USED_EP_NUM); i++)
+			if (ep_intr & (1 <<  i))
+				pch_udc_svc_data_out(dev, i -
+							 UDC_EPINT_OUT_SHIFT);
+	}
+	spin_unlock(&dev->lock);
+	return IRQ_HANDLED;
+}
+
+/**
+ * pch_udc_setup_ep0() - This function enables control endpoint for traffic
+ * @dev:	Reference to the device structure
+ */
+static void pch_udc_setup_ep0(struct pch_udc_dev *dev)
+{
+	/* enable ep0 interrupts */
+	pch_udc_enable_ep_interrupts(dev, UDC_EPINT_IN_EP0 |
+						UDC_EPINT_OUT_EP0);
+	/* enable device interrupts */
+	pch_udc_enable_interrupts(dev, UDC_DEVINT_UR | UDC_DEVINT_US |
+				       UDC_DEVINT_ES | UDC_DEVINT_ENUM |
+				       UDC_DEVINT_SI | UDC_DEVINT_SC);
+}
+
+/**
+ * pch_udc_pcd_reinit() - This API initializes the endpoint structures
+ * @dev:	Reference to the driver structure
+ */
+static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
+{
+	const char *const ep_string[] = {
+		ep0_string, "ep0out", "ep1in", "ep1out", "ep2in", "ep2out",
+		"ep3in", "ep3out", "ep4in", "ep4out", "ep5in", "ep5out",
+		"ep6in", "ep6out", "ep7in", "ep7out", "ep8in", "ep8out",
+		"ep9in", "ep9out", "ep10in", "ep10out", "ep11in", "ep11out",
+		"ep12in", "ep12out", "ep13in", "ep13out", "ep14in", "ep14out",
+		"ep15in", "ep15out",
+	};
+	int i;
+
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+	INIT_LIST_HEAD(&dev->gadget.ep_list);
+
+	/* Initialize the endpoints structures */
+	memset(dev->ep, 0, sizeof dev->ep);
+	for (i = 0; i < PCH_UDC_EP_NUM; i++) {
+		struct pch_udc_ep *ep = &dev->ep[i];
+		ep->dev = dev;
+		ep->halted = 1;
+		ep->num = i / 2;
+		ep->in = ~i & 1;
+		ep->ep.name = ep_string[i];
+		ep->ep.ops = &pch_udc_ep_ops;
+		if (ep->in) {
+			ep->offset_addr = ep->num * UDC_EP_REG_SHIFT;
+			ep->ep.caps.dir_in = true;
+		} else {
+			ep->offset_addr = (UDC_EPINT_OUT_SHIFT + ep->num) *
+					  UDC_EP_REG_SHIFT;
+			ep->ep.caps.dir_out = true;
+		}
+		if (i == UDC_EP0IN_IDX || i == UDC_EP0OUT_IDX) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+		/* need to set ep->ep.maxpacket and set Default Configuration?*/
+		usb_ep_set_maxpacket_limit(&ep->ep, UDC_BULK_MAX_PKT_SIZE);
+		list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
+		INIT_LIST_HEAD(&ep->queue);
+	}
+	usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0IN_IDX].ep, UDC_EP0IN_MAX_PKT_SIZE);
+	usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0OUT_IDX].ep, UDC_EP0OUT_MAX_PKT_SIZE);
+
+	/* remove ep0 in and out from the list.  They have own pointer */
+	list_del_init(&dev->ep[UDC_EP0IN_IDX].ep.ep_list);
+	list_del_init(&dev->ep[UDC_EP0OUT_IDX].ep.ep_list);
+
+	dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep;
+	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+}
+
+/**
+ * pch_udc_pcd_init() - This API initializes the driver structure
+ * @dev:	Reference to the driver structure
+ *
+ * Return codes:
+ *	0:		Success
+ *	-ERRNO:		All kind of errors when retrieving VBUS GPIO
+ */
+static int pch_udc_pcd_init(struct pch_udc_dev *dev)
+{
+	int ret;
+
+	pch_udc_init(dev);
+	pch_udc_pcd_reinit(dev);
+
+	ret = pch_vbus_gpio_init(dev);
+	if (ret)
+		pch_udc_exit(dev);
+	return ret;
+}
+
+/**
+ * init_dma_pools() - create dma pools during initialization
+ * @dev:	reference to struct pci_dev
+ */
+static int init_dma_pools(struct pch_udc_dev *dev)
+{
+	struct pch_udc_stp_dma_desc	*td_stp;
+	struct pch_udc_data_dma_desc	*td_data;
+	void				*ep0out_buf;
+
+	/* DMA setup */
+	dev->data_requests = dma_pool_create("data_requests", &dev->pdev->dev,
+		sizeof(struct pch_udc_data_dma_desc), 0, 0);
+	if (!dev->data_requests) {
+		dev_err(&dev->pdev->dev, "%s: can't get request data pool\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	/* dma desc for setup data */
+	dev->stp_requests = dma_pool_create("setup requests", &dev->pdev->dev,
+		sizeof(struct pch_udc_stp_dma_desc), 0, 0);
+	if (!dev->stp_requests) {
+		dev_err(&dev->pdev->dev, "%s: can't get setup request pool\n",
+			__func__);
+		return -ENOMEM;
+	}
+	/* setup */
+	td_stp = dma_pool_alloc(dev->stp_requests, GFP_KERNEL,
+				&dev->ep[UDC_EP0OUT_IDX].td_stp_phys);
+	if (!td_stp) {
+		dev_err(&dev->pdev->dev,
+			"%s: can't allocate setup dma descriptor\n", __func__);
+		return -ENOMEM;
+	}
+	dev->ep[UDC_EP0OUT_IDX].td_stp = td_stp;
+
+	/* data: 0 packets !? */
+	td_data = dma_pool_alloc(dev->data_requests, GFP_KERNEL,
+				&dev->ep[UDC_EP0OUT_IDX].td_data_phys);
+	if (!td_data) {
+		dev_err(&dev->pdev->dev,
+			"%s: can't allocate data dma descriptor\n", __func__);
+		return -ENOMEM;
+	}
+	dev->ep[UDC_EP0OUT_IDX].td_data = td_data;
+	dev->ep[UDC_EP0IN_IDX].td_stp = NULL;
+	dev->ep[UDC_EP0IN_IDX].td_stp_phys = 0;
+	dev->ep[UDC_EP0IN_IDX].td_data = NULL;
+	dev->ep[UDC_EP0IN_IDX].td_data_phys = 0;
+
+	ep0out_buf = devm_kzalloc(&dev->pdev->dev, UDC_EP0OUT_BUFF_SIZE * 4,
+				  GFP_KERNEL);
+	if (!ep0out_buf)
+		return -ENOMEM;
+	dev->dma_addr = dma_map_single(&dev->pdev->dev, ep0out_buf,
+				       UDC_EP0OUT_BUFF_SIZE * 4,
+				       DMA_FROM_DEVICE);
+	return dma_mapping_error(&dev->pdev->dev, dev->dma_addr);
+}
+
+static int pch_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct pch_udc_dev	*dev = to_pch_udc(g);
+
+	dev->driver = driver;
+
+	/* get ready for ep0 traffic */
+	pch_udc_setup_ep0(dev);
+
+	/* clear SD */
+	if ((pch_vbus_gpio_get_value(dev) != 0) || !dev->vbus_gpio.intr)
+		pch_udc_clear_disconnect(dev);
+
+	dev->connected = 1;
+	return 0;
+}
+
+static int pch_udc_stop(struct usb_gadget *g)
+{
+	struct pch_udc_dev	*dev = to_pch_udc(g);
+
+	pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
+
+	/* Assures that there are no pending requests with this driver */
+	dev->driver = NULL;
+	dev->connected = 0;
+
+	/* set SD */
+	pch_udc_set_disconnect(dev);
+
+	return 0;
+}
+
+static void pch_vbus_gpio_remove_table(void *table)
+{
+	gpiod_remove_lookup_table(table);
+}
+
+static int pch_vbus_gpio_add_table(struct device *d, void *table)
+{
+	gpiod_add_lookup_table(table);
+	return devm_add_action_or_reset(d, pch_vbus_gpio_remove_table, table);
+}
+
+static struct gpiod_lookup_table pch_udc_minnow_vbus_gpio_table = {
+	.dev_id		= "0000:02:02.4",
+	.table		= {
+		GPIO_LOOKUP("sch_gpio.33158", 12, NULL, GPIO_ACTIVE_HIGH),
+		{}
+	},
+};
+
+static int pch_udc_minnow_platform_init(struct device *d)
+{
+	return pch_vbus_gpio_add_table(d, &pch_udc_minnow_vbus_gpio_table);
+}
+
+static int pch_udc_quark_platform_init(struct device *d)
+{
+	struct pch_udc_dev *dev = dev_get_drvdata(d);
+
+	dev->bar = PCH_UDC_PCI_BAR_QUARK_X1000;
+	return 0;
+}
+
+static void pch_udc_shutdown(struct pci_dev *pdev)
+{
+	struct pch_udc_dev *dev = pci_get_drvdata(pdev);
+
+	pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
+	pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+
+	/* disable the pullup so the host will think we're gone */
+	pch_udc_set_disconnect(dev);
+}
+
+static void pch_udc_remove(struct pci_dev *pdev)
+{
+	struct pch_udc_dev	*dev = pci_get_drvdata(pdev);
+
+	usb_del_gadget_udc(&dev->gadget);
+
+	/* gadget driver must not be registered */
+	if (dev->driver)
+		dev_err(&pdev->dev,
+			"%s: gadget driver still bound!!!\n", __func__);
+	/* dma pool cleanup */
+	dma_pool_destroy(dev->data_requests);
+
+	if (dev->stp_requests) {
+		/* cleanup DMA desc's for ep0in */
+		if (dev->ep[UDC_EP0OUT_IDX].td_stp) {
+			dma_pool_free(dev->stp_requests,
+				dev->ep[UDC_EP0OUT_IDX].td_stp,
+				dev->ep[UDC_EP0OUT_IDX].td_stp_phys);
+		}
+		if (dev->ep[UDC_EP0OUT_IDX].td_data) {
+			dma_pool_free(dev->stp_requests,
+				dev->ep[UDC_EP0OUT_IDX].td_data,
+				dev->ep[UDC_EP0OUT_IDX].td_data_phys);
+		}
+		dma_pool_destroy(dev->stp_requests);
+	}
+
+	if (dev->dma_addr)
+		dma_unmap_single(&dev->pdev->dev, dev->dma_addr,
+				 UDC_EP0OUT_BUFF_SIZE * 4, DMA_FROM_DEVICE);
+
+	pch_vbus_gpio_free(dev);
+
+	pch_udc_exit(dev);
+}
+
+static int __maybe_unused pch_udc_suspend(struct device *d)
+{
+	struct pch_udc_dev *dev = dev_get_drvdata(d);
+
+	pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
+	pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+
+	return 0;
+}
+
+static int __maybe_unused pch_udc_resume(struct device *d)
+{
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(pch_udc_pm, pch_udc_suspend, pch_udc_resume);
+
+typedef int (*platform_init_fn)(struct device *);
+
+static int pch_udc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	platform_init_fn platform_init = (platform_init_fn)id->driver_data;
+	int			retval;
+	struct pch_udc_dev	*dev;
+
+	/* init */
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	/* pci setup */
+	retval = pcim_enable_device(pdev);
+	if (retval)
+		return retval;
+
+	dev->bar = PCH_UDC_PCI_BAR;
+	dev->pdev = pdev;
+	pci_set_drvdata(pdev, dev);
+
+	/* Platform specific hook */
+	if (platform_init) {
+		retval = platform_init(&pdev->dev);
+		if (retval)
+			return retval;
+	}
+
+	/* PCI resource allocation */
+	retval = pcim_iomap_regions(pdev, BIT(dev->bar), pci_name(pdev));
+	if (retval)
+		return retval;
+
+	dev->base_addr = pcim_iomap_table(pdev)[dev->bar];
+
+	/* initialize the hardware */
+	retval = pch_udc_pcd_init(dev);
+	if (retval)
+		return retval;
+
+	pci_enable_msi(pdev);
+
+	retval = devm_request_irq(&pdev->dev, pdev->irq, pch_udc_isr,
+				  IRQF_SHARED, KBUILD_MODNAME, dev);
+	if (retval) {
+		dev_err(&pdev->dev, "%s: request_irq(%d) fail\n", __func__,
+			pdev->irq);
+		goto finished;
+	}
+
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
+	/* device struct setup */
+	spin_lock_init(&dev->lock);
+	dev->gadget.ops = &pch_udc_ops;
+
+	retval = init_dma_pools(dev);
+	if (retval)
+		goto finished;
+
+	dev->gadget.name = KBUILD_MODNAME;
+	dev->gadget.max_speed = USB_SPEED_HIGH;
+
+	/* Put the device in disconnected state till a driver is bound */
+	pch_udc_set_disconnect(dev);
+	retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
+	if (retval)
+		goto finished;
+	return 0;
+
+finished:
+	pch_udc_remove(pdev);
+	return retval;
+}
+
+static const struct pci_device_id pch_udc_pcidev_id[] = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC),
+		.class = PCI_CLASS_SERIAL_USB_DEVICE,
+		.class_mask = 0xffffffff,
+		.driver_data = (kernel_ulong_t)&pch_udc_quark_platform_init,
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC,
+			       PCI_VENDOR_ID_CIRCUITCO, PCI_SUBSYSTEM_ID_CIRCUITCO_MINNOWBOARD),
+		.class = PCI_CLASS_SERIAL_USB_DEVICE,
+		.class_mask = 0xffffffff,
+		.driver_data = (kernel_ulong_t)&pch_udc_minnow_platform_init,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC),
+		.class = PCI_CLASS_SERIAL_USB_DEVICE,
+		.class_mask = 0xffffffff,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7213_IOH_UDC),
+		.class = PCI_CLASS_SERIAL_USB_DEVICE,
+		.class_mask = 0xffffffff,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7831_IOH_UDC),
+		.class = PCI_CLASS_SERIAL_USB_DEVICE,
+		.class_mask = 0xffffffff,
+	},
+	{ 0 },
+};
+
+MODULE_DEVICE_TABLE(pci, pch_udc_pcidev_id);
+
+static struct pci_driver pch_udc_driver = {
+	.name =	KBUILD_MODNAME,
+	.id_table =	pch_udc_pcidev_id,
+	.probe =	pch_udc_probe,
+	.remove =	pch_udc_remove,
+	.shutdown =	pch_udc_shutdown,
+	.driver = {
+		.pm = &pch_udc_pm,
+	},
+};
+
+module_pci_driver(pch_udc_driver);
+
+MODULE_DESCRIPTION("Intel EG20T USB Device Controller");
+MODULE_AUTHOR("LAPIS Semiconductor, <tomoya-linux@dsn.lapis-semi.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c
new file mode 100644
index 000000000..9e01ddf2b
--- /dev/null
+++ b/drivers/usb/gadget/udc/pxa25x_udc.c
@@ -0,0 +1,2550 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Intel PXA25x and IXP4xx on-chip full speed USB device controllers
+ *
+ * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
+ * Copyright (C) 2003 Robert Schwebel, Pengutronix
+ * Copyright (C) 2003 Benedikt Spranger, Pengutronix
+ * Copyright (C) 2003 David Brownell
+ * Copyright (C) 2003 Joshua Wise
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/platform_data/pxa2xx_udc.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
+#include <linux/io.h>
+#include <linux/prefetch.h>
+
+#include <asm/byteorder.h>
+#include <asm/dma.h>
+#include <asm/mach-types.h>
+#include <asm/unaligned.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+
+#define UDCCR	 0x0000 /* UDC Control Register */
+#define UDC_RES1 0x0004 /* UDC Undocumented - Reserved1 */
+#define UDC_RES2 0x0008 /* UDC Undocumented - Reserved2 */
+#define UDC_RES3 0x000C /* UDC Undocumented - Reserved3 */
+#define UDCCS0	 0x0010 /* UDC Endpoint 0 Control/Status Register */
+#define UDCCS1	 0x0014 /* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS2	 0x0018 /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS3	 0x001C /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS4	 0x0020 /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS5	 0x0024 /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS6	 0x0028 /* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS7	 0x002C /* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS8	 0x0030 /* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS9	 0x0034 /* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS10	 0x0038 /* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS11	 0x003C /* UDC Endpoint 11 (IN) Control/Status Register */
+#define UDCCS12	 0x0040 /* UDC Endpoint 12 (OUT) Control/Status Register */
+#define UDCCS13	 0x0044 /* UDC Endpoint 13 (IN) Control/Status Register */
+#define UDCCS14	 0x0048 /* UDC Endpoint 14 (OUT) Control/Status Register */
+#define UDCCS15	 0x004C /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+#define UFNRH	 0x0060 /* UDC Frame Number Register High */
+#define UFNRL	 0x0064 /* UDC Frame Number Register Low */
+#define UBCR2	 0x0068 /* UDC Byte Count Reg 2 */
+#define UBCR4	 0x006c /* UDC Byte Count Reg 4 */
+#define UBCR7	 0x0070 /* UDC Byte Count Reg 7 */
+#define UBCR9	 0x0074 /* UDC Byte Count Reg 9 */
+#define UBCR12	 0x0078 /* UDC Byte Count Reg 12 */
+#define UBCR14	 0x007c /* UDC Byte Count Reg 14 */
+#define UDDR0	 0x0080 /* UDC Endpoint 0 Data Register */
+#define UDDR1	 0x0100 /* UDC Endpoint 1 Data Register */
+#define UDDR2	 0x0180 /* UDC Endpoint 2 Data Register */
+#define UDDR3	 0x0200 /* UDC Endpoint 3 Data Register */
+#define UDDR4	 0x0400 /* UDC Endpoint 4 Data Register */
+#define UDDR5	 0x00A0 /* UDC Endpoint 5 Data Register */
+#define UDDR6	 0x0600 /* UDC Endpoint 6 Data Register */
+#define UDDR7	 0x0680 /* UDC Endpoint 7 Data Register */
+#define UDDR8	 0x0700 /* UDC Endpoint 8 Data Register */
+#define UDDR9	 0x0900 /* UDC Endpoint 9 Data Register */
+#define UDDR10	 0x00C0 /* UDC Endpoint 10 Data Register */
+#define UDDR11	 0x0B00 /* UDC Endpoint 11 Data Register */
+#define UDDR12	 0x0B80 /* UDC Endpoint 12 Data Register */
+#define UDDR13	 0x0C00 /* UDC Endpoint 13 Data Register */
+#define UDDR14	 0x0E00 /* UDC Endpoint 14 Data Register */
+#define UDDR15	 0x00E0 /* UDC Endpoint 15 Data Register */
+
+#define UICR0	 0x0050 /* UDC Interrupt Control Register 0 */
+#define UICR1	 0x0054 /* UDC Interrupt Control Register 1 */
+
+#define USIR0	 0x0058 /* UDC Status Interrupt Register 0 */
+#define USIR1	 0x005C /* UDC Status Interrupt Register 1 */
+
+#define UDCCR_UDE	(1 << 0)	/* UDC enable */
+#define UDCCR_UDA	(1 << 1)	/* UDC active */
+#define UDCCR_RSM	(1 << 2)	/* Device resume */
+#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
+#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
+#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
+#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
+
+#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
+#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
+#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
+#define UDCCS0_SST	(1 << 4)	/* Sent stall */
+#define UDCCS0_FST	(1 << 5)	/* Force stall */
+#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
+#define UDCCS0_SA	(1 << 7)	/* Setup active */
+
+#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
+
+#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
+#ifdef CONFIG_ARCH_IXP4XX /* FIXME: is this right?, datasheed says '2' */
+#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
+#endif
+#ifdef CONFIG_ARCH_PXA
+#define UDCCS_IO_ROF	(1 << 2)	/* Receive overflow */
+#endif
+#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
+
+#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
+#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
+#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
+#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
+#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
+#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
+#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
+#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
+#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
+
+#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
+#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
+#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
+#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
+#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
+#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
+#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
+#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
+
+#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
+#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
+#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
+#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
+#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
+#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
+#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
+#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
+
+#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
+#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
+#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
+#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
+#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
+#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
+#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
+#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
+
+/*
+ * This driver handles the USB Device Controller (UDC) in Intel's PXA 25x
+ * series processors.  The UDC for the IXP 4xx series is very similar.
+ * There are fifteen endpoints, in addition to ep0.
+ *
+ * Such controller drivers work with a gadget driver.  The gadget driver
+ * returns descriptors, implements configuration and data protocols used
+ * by the host to interact with this device, and allocates endpoints to
+ * the different protocol interfaces.  The controller driver virtualizes
+ * usb hardware so that the gadget drivers will be more portable.
+ *
+ * This UDC hardware wants to implement a bit too much USB protocol, so
+ * it constrains the sorts of USB configuration change events that work.
+ * The errata for these chips are misleading; some "fixed" bugs from
+ * pxa250 a0/a1 b0/b1/b2 sure act like they're still there.
+ *
+ * Note that the UDC hardware supports DMA (except on IXP) but that's
+ * not used here.  IN-DMA (to host) is simple enough, when the data is
+ * suitably aligned (16 bytes) ... the network stack doesn't do that,
+ * other software can.  OUT-DMA is buggy in most chip versions, as well
+ * as poorly designed (data toggle not automatic).  So this driver won't
+ * bother using DMA.  (Mostly-working IN-DMA support was available in
+ * kernels before 2.6.23, but was never enabled or well tested.)
+ */
+
+#define	DRIVER_VERSION	"30-June-2007"
+#define	DRIVER_DESC	"PXA 25x USB Device Controller driver"
+
+
+static const char driver_name [] = "pxa25x_udc";
+
+static const char ep0name [] = "ep0";
+
+
+#ifdef CONFIG_ARCH_IXP4XX
+
+/* cpu-specific register addresses are compiled in to this code */
+#ifdef CONFIG_ARCH_PXA
+#error "Can't configure both IXP and PXA"
+#endif
+
+/* IXP doesn't yet support <linux/clk.h> */
+#define clk_get(dev,name)	NULL
+#define clk_enable(clk)		do { } while (0)
+#define clk_disable(clk)	do { } while (0)
+#define clk_put(clk)		do { } while (0)
+
+#endif
+
+#include "pxa25x_udc.h"
+
+
+#ifdef	CONFIG_USB_PXA25X_SMALL
+#define SIZE_STR	" (small)"
+#else
+#define SIZE_STR	""
+#endif
+
+/* ---------------------------------------------------------------------------
+ *	endpoint related parts of the api to the usb controller hardware,
+ *	used by gadget driver; and the inner talker-to-hardware core.
+ * ---------------------------------------------------------------------------
+ */
+
+static void pxa25x_ep_fifo_flush (struct usb_ep *ep);
+static void nuke (struct pxa25x_ep *, int status);
+
+/* one GPIO should control a D+ pullup, so host sees this device (or not) */
+static void pullup_off(void)
+{
+	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
+	int off_level = mach->gpio_pullup_inverted;
+
+	if (gpio_is_valid(mach->gpio_pullup))
+		gpio_set_value(mach->gpio_pullup, off_level);
+	else if (mach->udc_command)
+		mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
+}
+
+static void pullup_on(void)
+{
+	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
+	int on_level = !mach->gpio_pullup_inverted;
+
+	if (gpio_is_valid(mach->gpio_pullup))
+		gpio_set_value(mach->gpio_pullup, on_level);
+	else if (mach->udc_command)
+		mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
+}
+
+#if defined(CONFIG_CPU_BIG_ENDIAN)
+/*
+ * IXP4xx has its buses wired up in a way that relies on never doing any
+ * byte swaps, independent of whether it runs in big-endian or little-endian
+ * mode, as explained by Krzysztof Hałasa.
+ *
+ * We only support pxa25x in little-endian mode, but it is very likely
+ * that it works the same way.
+ */
+static inline void udc_set_reg(struct pxa25x_udc *dev, u32 reg, u32 val)
+{
+	iowrite32be(val, dev->regs + reg);
+}
+
+static inline u32 udc_get_reg(struct pxa25x_udc *dev, u32 reg)
+{
+	return ioread32be(dev->regs + reg);
+}
+#else
+static inline void udc_set_reg(struct pxa25x_udc *dev, u32 reg, u32 val)
+{
+	writel(val, dev->regs + reg);
+}
+
+static inline u32 udc_get_reg(struct pxa25x_udc *dev, u32 reg)
+{
+	return readl(dev->regs + reg);
+}
+#endif
+
+static void pio_irq_enable(struct pxa25x_ep *ep)
+{
+	u32 bEndpointAddress = ep->bEndpointAddress & 0xf;
+
+        if (bEndpointAddress < 8)
+		udc_set_reg(ep->dev, UICR0, udc_get_reg(ep->dev, UICR0) &
+						~(1 << bEndpointAddress));
+        else {
+                bEndpointAddress -= 8;
+		udc_set_reg(ep->dev, UICR1, udc_get_reg(ep->dev, UICR1) &
+						~(1 << bEndpointAddress));
+	}
+}
+
+static void pio_irq_disable(struct pxa25x_ep *ep)
+{
+	u32 bEndpointAddress = ep->bEndpointAddress & 0xf;
+
+        if (bEndpointAddress < 8)
+                udc_set_reg(ep->dev, UICR0, udc_get_reg(ep->dev, UICR0) |
+						(1 << bEndpointAddress));
+        else {
+                bEndpointAddress -= 8;
+                udc_set_reg(ep->dev, UICR1, udc_get_reg(ep->dev, UICR1) |
+						(1 << bEndpointAddress));
+        }
+}
+
+/* The UDCCR reg contains mask and interrupt status bits,
+ * so using '|=' isn't safe as it may ack an interrupt.
+ */
+#define UDCCR_MASK_BITS         (UDCCR_REM | UDCCR_SRM | UDCCR_UDE)
+
+static inline void udc_set_mask_UDCCR(struct pxa25x_udc *dev, int mask)
+{
+	u32 udccr = udc_get_reg(dev, UDCCR);
+
+	udc_set_reg(dev, (udccr & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS), UDCCR);
+}
+
+static inline void udc_clear_mask_UDCCR(struct pxa25x_udc *dev, int mask)
+{
+	u32 udccr = udc_get_reg(dev, UDCCR);
+
+	udc_set_reg(dev, (udccr & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS), UDCCR);
+}
+
+static inline void udc_ack_int_UDCCR(struct pxa25x_udc *dev, int mask)
+{
+	/* udccr contains the bits we dont want to change */
+	u32 udccr = udc_get_reg(dev, UDCCR) & UDCCR_MASK_BITS;
+
+	udc_set_reg(dev, udccr | (mask & ~UDCCR_MASK_BITS), UDCCR);
+}
+
+static inline u32 udc_ep_get_UDCCS(struct pxa25x_ep *ep)
+{
+	return udc_get_reg(ep->dev, ep->regoff_udccs);
+}
+
+static inline void udc_ep_set_UDCCS(struct pxa25x_ep *ep, u32 data)
+{
+	udc_set_reg(ep->dev, data, ep->regoff_udccs);
+}
+
+static inline u32 udc_ep0_get_UDCCS(struct pxa25x_udc *dev)
+{
+	return udc_get_reg(dev, UDCCS0);
+}
+
+static inline void udc_ep0_set_UDCCS(struct pxa25x_udc *dev, u32 data)
+{
+	udc_set_reg(dev, data, UDCCS0);
+}
+
+static inline u32 udc_ep_get_UDDR(struct pxa25x_ep *ep)
+{
+	return udc_get_reg(ep->dev, ep->regoff_uddr);
+}
+
+static inline void udc_ep_set_UDDR(struct pxa25x_ep *ep, u32 data)
+{
+	udc_set_reg(ep->dev, data, ep->regoff_uddr);
+}
+
+static inline u32 udc_ep_get_UBCR(struct pxa25x_ep *ep)
+{
+	return udc_get_reg(ep->dev, ep->regoff_ubcr);
+}
+
+/*
+ * endpoint enable/disable
+ *
+ * we need to verify the descriptors used to enable endpoints.  since pxa25x
+ * endpoint configurations are fixed, and are pretty much always enabled,
+ * there's not a lot to manage here.
+ *
+ * because pxa25x can't selectively initialize bulk (or interrupt) endpoints,
+ * (resetting endpoint halt and toggle), SET_INTERFACE is unusable except
+ * for a single interface (with only the default altsetting) and for gadget
+ * drivers that don't halt endpoints (not reset by set_interface).  that also
+ * means that if you use ISO, you must violate the USB spec rule that all
+ * iso endpoints must be in non-default altsettings.
+ */
+static int pxa25x_ep_enable (struct usb_ep *_ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct pxa25x_ep        *ep;
+	struct pxa25x_udc       *dev;
+
+	ep = container_of (_ep, struct pxa25x_ep, ep);
+	if (!_ep || !desc || _ep->name == ep0name
+			|| desc->bDescriptorType != USB_DT_ENDPOINT
+			|| ep->bEndpointAddress != desc->bEndpointAddress
+			|| ep->fifo_size < usb_endpoint_maxp (desc)) {
+		DMSG("%s, bad ep or descriptor\n", __func__);
+		return -EINVAL;
+	}
+
+	/* xfer types must match, except that interrupt ~= bulk */
+	if (ep->bmAttributes != desc->bmAttributes
+			&& ep->bmAttributes != USB_ENDPOINT_XFER_BULK
+			&& desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
+		DMSG("%s, %s type mismatch\n", __func__, _ep->name);
+		return -EINVAL;
+	}
+
+	/* hardware _could_ do smaller, but driver doesn't */
+	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
+				&& usb_endpoint_maxp (desc)
+						!= BULK_FIFO_SIZE)
+			|| !desc->wMaxPacketSize) {
+		DMSG("%s, bad %s maxpacket\n", __func__, _ep->name);
+		return -ERANGE;
+	}
+
+	dev = ep->dev;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		DMSG("%s, bogus device state\n", __func__);
+		return -ESHUTDOWN;
+	}
+
+	ep->ep.desc = desc;
+	ep->stopped = 0;
+	ep->pio_irqs = 0;
+	ep->ep.maxpacket = usb_endpoint_maxp (desc);
+
+	/* flush fifo (mostly for OUT buffers) */
+	pxa25x_ep_fifo_flush (_ep);
+
+	/* ... reset halt state too, if we could ... */
+
+	DBG(DBG_VERBOSE, "enabled %s\n", _ep->name);
+	return 0;
+}
+
+static int pxa25x_ep_disable (struct usb_ep *_ep)
+{
+	struct pxa25x_ep	*ep;
+	unsigned long		flags;
+
+	ep = container_of (_ep, struct pxa25x_ep, ep);
+	if (!_ep || !ep->ep.desc) {
+		DMSG("%s, %s not enabled\n", __func__,
+			_ep ? ep->ep.name : NULL);
+		return -EINVAL;
+	}
+	local_irq_save(flags);
+
+	nuke (ep, -ESHUTDOWN);
+
+	/* flush fifo (mostly for IN buffers) */
+	pxa25x_ep_fifo_flush (_ep);
+
+	ep->ep.desc = NULL;
+	ep->stopped = 1;
+
+	local_irq_restore(flags);
+	DBG(DBG_VERBOSE, "%s disabled\n", _ep->name);
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* for the pxa25x, these can just wrap kmalloc/kfree.  gadget drivers
+ * must still pass correctly initialized endpoints, since other controller
+ * drivers may care about how it's currently set up (dma issues etc).
+ */
+
+/*
+ *	pxa25x_ep_alloc_request - allocate a request data structure
+ */
+static struct usb_request *
+pxa25x_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct pxa25x_request *req;
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD (&req->queue);
+	return &req->req;
+}
+
+
+/*
+ *	pxa25x_ep_free_request - deallocate a request data structure
+ */
+static void
+pxa25x_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct pxa25x_request	*req;
+
+	req = container_of (_req, struct pxa25x_request, req);
+	WARN_ON(!list_empty (&req->queue));
+	kfree(req);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ *	done - retire a request; caller blocked irqs
+ */
+static void done(struct pxa25x_ep *ep, struct pxa25x_request *req, int status)
+{
+	unsigned		stopped = ep->stopped;
+
+	list_del_init(&req->queue);
+
+	if (likely (req->req.status == -EINPROGRESS))
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	if (status && status != -ESHUTDOWN)
+		DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length);
+
+	/* don't modify queue heads during completion callback */
+	ep->stopped = 1;
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	ep->stopped = stopped;
+}
+
+
+static inline void ep0_idle (struct pxa25x_udc *dev)
+{
+	dev->ep0state = EP0_IDLE;
+}
+
+static int
+write_packet(struct pxa25x_ep *ep, struct pxa25x_request *req, unsigned max)
+{
+	u8		*buf;
+	unsigned	length, count;
+
+	buf = req->req.buf + req->req.actual;
+	prefetch(buf);
+
+	/* how big will this packet be? */
+	length = min(req->req.length - req->req.actual, max);
+	req->req.actual += length;
+
+	count = length;
+	while (likely(count--))
+		udc_ep_set_UDDR(ep, *buf++);
+
+	return length;
+}
+
+/*
+ * write to an IN endpoint fifo, as many packets as possible.
+ * irqs will use this to write the rest later.
+ * caller guarantees at least one packet buffer is ready (or a zlp).
+ */
+static int
+write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
+{
+	unsigned		max;
+
+	max = usb_endpoint_maxp(ep->ep.desc);
+	do {
+		unsigned	count;
+		int		is_last, is_short;
+
+		count = write_packet(ep, req, max);
+
+		/* last packet is usually short (or a zlp) */
+		if (unlikely (count != max))
+			is_last = is_short = 1;
+		else {
+			if (likely(req->req.length != req->req.actual)
+					|| req->req.zero)
+				is_last = 0;
+			else
+				is_last = 1;
+			/* interrupt/iso maxpacket may not fill the fifo */
+			is_short = unlikely (max < ep->fifo_size);
+		}
+
+		DBG(DBG_VERY_NOISY, "wrote %s %d bytes%s%s %d left %p\n",
+			ep->ep.name, count,
+			is_last ? "/L" : "", is_short ? "/S" : "",
+			req->req.length - req->req.actual, req);
+
+		/* let loose that packet. maybe try writing another one,
+		 * double buffering might work.  TSP, TPC, and TFS
+		 * bit values are the same for all normal IN endpoints.
+		 */
+		udc_ep_set_UDCCS(ep, UDCCS_BI_TPC);
+		if (is_short)
+			udc_ep_set_UDCCS(ep, UDCCS_BI_TSP);
+
+		/* requests complete when all IN data is in the FIFO */
+		if (is_last) {
+			done (ep, req, 0);
+			if (list_empty(&ep->queue))
+				pio_irq_disable(ep);
+			return 1;
+		}
+
+		// TODO experiment: how robust can fifo mode tweaking be?
+		// double buffering is off in the default fifo mode, which
+		// prevents TFS from being set here.
+
+	} while (udc_ep_get_UDCCS(ep) & UDCCS_BI_TFS);
+	return 0;
+}
+
+/* caller asserts req->pending (ep0 irq status nyet cleared); starts
+ * ep0 data stage.  these chips want very simple state transitions.
+ */
+static inline
+void ep0start(struct pxa25x_udc *dev, u32 flags, const char *tag)
+{
+	udc_ep0_set_UDCCS(dev, flags|UDCCS0_SA|UDCCS0_OPR);
+	udc_set_reg(dev, USIR0, USIR0_IR0);
+	dev->req_pending = 0;
+	DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n",
+		__func__, tag, udc_ep0_get_UDCCS(dev), flags);
+}
+
+static int
+write_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
+{
+	struct pxa25x_udc *dev = ep->dev;
+	unsigned	count;
+	int		is_short;
+
+	count = write_packet(&dev->ep[0], req, EP0_FIFO_SIZE);
+	ep->dev->stats.write.bytes += count;
+
+	/* last packet "must be" short (or a zlp) */
+	is_short = (count != EP0_FIFO_SIZE);
+
+	DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count,
+		req->req.length - req->req.actual, req);
+
+	if (unlikely (is_short)) {
+		if (ep->dev->req_pending)
+			ep0start(ep->dev, UDCCS0_IPR, "short IN");
+		else
+			udc_ep0_set_UDCCS(dev, UDCCS0_IPR);
+
+		count = req->req.length;
+		done (ep, req, 0);
+		ep0_idle(ep->dev);
+#ifndef CONFIG_ARCH_IXP4XX
+#if 1
+		/* This seems to get rid of lost status irqs in some cases:
+		 * host responds quickly, or next request involves config
+		 * change automagic, or should have been hidden, or ...
+		 *
+		 * FIXME get rid of all udelays possible...
+		 */
+		if (count >= EP0_FIFO_SIZE) {
+			count = 100;
+			do {
+				if ((udc_ep0_get_UDCCS(dev) & UDCCS0_OPR) != 0) {
+					/* clear OPR, generate ack */
+					udc_ep0_set_UDCCS(dev, UDCCS0_OPR);
+					break;
+				}
+				count--;
+				udelay(1);
+			} while (count);
+		}
+#endif
+#endif
+	} else if (ep->dev->req_pending)
+		ep0start(ep->dev, 0, "IN");
+	return is_short;
+}
+
+
+/*
+ * read_fifo -  unload packet(s) from the fifo we use for usb OUT
+ * transfers and put them into the request.  caller should have made
+ * sure there's at least one packet ready.
+ *
+ * returns true if the request completed because of short packet or the
+ * request buffer having filled (and maybe overran till end-of-packet).
+ */
+static int
+read_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
+{
+	for (;;) {
+		u32		udccs;
+		u8		*buf;
+		unsigned	bufferspace, count, is_short;
+
+		/* make sure there's a packet in the FIFO.
+		 * UDCCS_{BO,IO}_RPC are all the same bit value.
+		 * UDCCS_{BO,IO}_RNE are all the same bit value.
+		 */
+		udccs = udc_ep_get_UDCCS(ep);
+		if (unlikely ((udccs & UDCCS_BO_RPC) == 0))
+			break;
+		buf = req->req.buf + req->req.actual;
+		prefetchw(buf);
+		bufferspace = req->req.length - req->req.actual;
+
+		/* read all bytes from this packet */
+		if (likely (udccs & UDCCS_BO_RNE)) {
+			count = 1 + (0x0ff & udc_ep_get_UBCR(ep));
+			req->req.actual += min (count, bufferspace);
+		} else /* zlp */
+			count = 0;
+		is_short = (count < ep->ep.maxpacket);
+		DBG(DBG_VERY_NOISY, "read %s %02x, %d bytes%s req %p %d/%d\n",
+			ep->ep.name, udccs, count,
+			is_short ? "/S" : "",
+			req, req->req.actual, req->req.length);
+		while (likely (count-- != 0)) {
+			u8	byte = (u8) udc_ep_get_UDDR(ep);
+
+			if (unlikely (bufferspace == 0)) {
+				/* this happens when the driver's buffer
+				 * is smaller than what the host sent.
+				 * discard the extra data.
+				 */
+				if (req->req.status != -EOVERFLOW)
+					DMSG("%s overflow %d\n",
+						ep->ep.name, count);
+				req->req.status = -EOVERFLOW;
+			} else {
+				*buf++ = byte;
+				bufferspace--;
+			}
+		}
+		udc_ep_set_UDCCS(ep, UDCCS_BO_RPC);
+		/* RPC/RSP/RNE could now reflect the other packet buffer */
+
+		/* iso is one request per packet */
+		if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+			if (udccs & UDCCS_IO_ROF)
+				req->req.status = -EHOSTUNREACH;
+			/* more like "is_done" */
+			is_short = 1;
+		}
+
+		/* completion */
+		if (is_short || req->req.actual == req->req.length) {
+			done (ep, req, 0);
+			if (list_empty(&ep->queue))
+				pio_irq_disable(ep);
+			return 1;
+		}
+
+		/* finished that packet.  the next one may be waiting... */
+	}
+	return 0;
+}
+
+/*
+ * special ep0 version of the above.  no UBCR0 or double buffering; status
+ * handshaking is magic.  most device protocols don't need control-OUT.
+ * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other
+ * protocols do use them.
+ */
+static int
+read_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
+{
+	u8		*buf, byte;
+	unsigned	bufferspace;
+
+	buf = req->req.buf + req->req.actual;
+	bufferspace = req->req.length - req->req.actual;
+
+	while (udc_ep_get_UDCCS(ep) & UDCCS0_RNE) {
+		byte = (u8) UDDR0;
+
+		if (unlikely (bufferspace == 0)) {
+			/* this happens when the driver's buffer
+			 * is smaller than what the host sent.
+			 * discard the extra data.
+			 */
+			if (req->req.status != -EOVERFLOW)
+				DMSG("%s overflow\n", ep->ep.name);
+			req->req.status = -EOVERFLOW;
+		} else {
+			*buf++ = byte;
+			req->req.actual++;
+			bufferspace--;
+		}
+	}
+
+	udc_ep_set_UDCCS(ep, UDCCS0_OPR | UDCCS0_IPR);
+
+	/* completion */
+	if (req->req.actual >= req->req.length)
+		return 1;
+
+	/* finished that packet.  the next one may be waiting... */
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct pxa25x_request	*req;
+	struct pxa25x_ep	*ep;
+	struct pxa25x_udc	*dev;
+	unsigned long		flags;
+
+	req = container_of(_req, struct pxa25x_request, req);
+	if (unlikely (!_req || !_req->complete || !_req->buf
+			|| !list_empty(&req->queue))) {
+		DMSG("%s, bad params\n", __func__);
+		return -EINVAL;
+	}
+
+	ep = container_of(_ep, struct pxa25x_ep, ep);
+	if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) {
+		DMSG("%s, bad ep\n", __func__);
+		return -EINVAL;
+	}
+
+	dev = ep->dev;
+	if (unlikely (!dev->driver
+			|| dev->gadget.speed == USB_SPEED_UNKNOWN)) {
+		DMSG("%s, bogus device state\n", __func__);
+		return -ESHUTDOWN;
+	}
+
+	/* iso is always one packet per request, that's the only way
+	 * we can report per-packet status.  that also helps with dma.
+	 */
+	if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
+			&& req->req.length > usb_endpoint_maxp(ep->ep.desc)))
+		return -EMSGSIZE;
+
+	DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n",
+		_ep->name, _req, _req->length, _req->buf);
+
+	local_irq_save(flags);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	/* kickstart this i/o queue? */
+	if (list_empty(&ep->queue) && !ep->stopped) {
+		if (ep->ep.desc == NULL/* ep0 */) {
+			unsigned	length = _req->length;
+
+			switch (dev->ep0state) {
+			case EP0_IN_DATA_PHASE:
+				dev->stats.write.ops++;
+				if (write_ep0_fifo(ep, req))
+					req = NULL;
+				break;
+
+			case EP0_OUT_DATA_PHASE:
+				dev->stats.read.ops++;
+				/* messy ... */
+				if (dev->req_config) {
+					DBG(DBG_VERBOSE, "ep0 config ack%s\n",
+						dev->has_cfr ?  "" : " raced");
+					if (dev->has_cfr)
+						udc_set_reg(dev, UDCCFR, UDCCFR_AREN |
+							    UDCCFR_ACM | UDCCFR_MB1);
+					done(ep, req, 0);
+					dev->ep0state = EP0_END_XFER;
+					local_irq_restore (flags);
+					return 0;
+				}
+				if (dev->req_pending)
+					ep0start(dev, UDCCS0_IPR, "OUT");
+				if (length == 0 || ((udc_ep0_get_UDCCS(dev) & UDCCS0_RNE) != 0
+						&& read_ep0_fifo(ep, req))) {
+					ep0_idle(dev);
+					done(ep, req, 0);
+					req = NULL;
+				}
+				break;
+
+			default:
+				DMSG("ep0 i/o, odd state %d\n", dev->ep0state);
+				local_irq_restore (flags);
+				return -EL2HLT;
+			}
+		/* can the FIFO can satisfy the request immediately? */
+		} else if ((ep->bEndpointAddress & USB_DIR_IN) != 0) {
+			if ((udc_ep_get_UDCCS(ep) & UDCCS_BI_TFS) != 0
+					&& write_fifo(ep, req))
+				req = NULL;
+		} else if ((udc_ep_get_UDCCS(ep) & UDCCS_BO_RFS) != 0
+				&& read_fifo(ep, req)) {
+			req = NULL;
+		}
+
+		if (likely(req && ep->ep.desc))
+			pio_irq_enable(ep);
+	}
+
+	/* pio or dma irq handler advances the queue. */
+	if (likely(req != NULL))
+		list_add_tail(&req->queue, &ep->queue);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+
+/*
+ *	nuke - dequeue ALL requests
+ */
+static void nuke(struct pxa25x_ep *ep, int status)
+{
+	struct pxa25x_request *req;
+
+	/* called with irqs blocked */
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next,
+				struct pxa25x_request,
+				queue);
+		done(ep, req, status);
+	}
+	if (ep->ep.desc)
+		pio_irq_disable(ep);
+}
+
+
+/* dequeue JUST ONE request */
+static int pxa25x_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct pxa25x_ep	*ep;
+	struct pxa25x_request	*req = NULL;
+	struct pxa25x_request	*iter;
+	unsigned long		flags;
+
+	ep = container_of(_ep, struct pxa25x_ep, ep);
+	if (!_ep || ep->ep.name == ep0name)
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		req = iter;
+		break;
+	}
+	if (!req) {
+		local_irq_restore(flags);
+		return -EINVAL;
+	}
+
+	done(ep, req, -ECONNRESET);
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int pxa25x_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	struct pxa25x_ep	*ep;
+	unsigned long		flags;
+
+	ep = container_of(_ep, struct pxa25x_ep, ep);
+	if (unlikely (!_ep
+			|| (!ep->ep.desc && ep->ep.name != ep0name))
+			|| ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+		DMSG("%s, bad ep\n", __func__);
+		return -EINVAL;
+	}
+	if (value == 0) {
+		/* this path (reset toggle+halt) is needed to implement
+		 * SET_INTERFACE on normal hardware.  but it can't be
+		 * done from software on the PXA UDC, and the hardware
+		 * forgets to do it as part of SET_INTERFACE automagic.
+		 */
+		DMSG("only host can clear %s halt\n", _ep->name);
+		return -EROFS;
+	}
+
+	local_irq_save(flags);
+
+	if ((ep->bEndpointAddress & USB_DIR_IN) != 0
+			&& ((udc_ep_get_UDCCS(ep) & UDCCS_BI_TFS) == 0
+			   || !list_empty(&ep->queue))) {
+		local_irq_restore(flags);
+		return -EAGAIN;
+	}
+
+	/* FST bit is the same for control, bulk in, bulk out, interrupt in */
+	udc_ep_set_UDCCS(ep, UDCCS_BI_FST|UDCCS_BI_FTF);
+
+	/* ep0 needs special care */
+	if (!ep->ep.desc) {
+		start_watchdog(ep->dev);
+		ep->dev->req_pending = 0;
+		ep->dev->ep0state = EP0_STALL;
+
+	/* and bulk/intr endpoints like dropping stalls too */
+	} else {
+		unsigned i;
+		for (i = 0; i < 1000; i += 20) {
+			if (udc_ep_get_UDCCS(ep) & UDCCS_BI_SST)
+				break;
+			udelay(20);
+		}
+	}
+	local_irq_restore(flags);
+
+	DBG(DBG_VERBOSE, "%s halt\n", _ep->name);
+	return 0;
+}
+
+static int pxa25x_ep_fifo_status(struct usb_ep *_ep)
+{
+	struct pxa25x_ep        *ep;
+
+	ep = container_of(_ep, struct pxa25x_ep, ep);
+	if (!_ep) {
+		DMSG("%s, bad ep\n", __func__);
+		return -ENODEV;
+	}
+	/* pxa can't report unclaimed bytes from IN fifos */
+	if ((ep->bEndpointAddress & USB_DIR_IN) != 0)
+		return -EOPNOTSUPP;
+	if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN
+			|| (udc_ep_get_UDCCS(ep) & UDCCS_BO_RFS) == 0)
+		return 0;
+	else
+		return (udc_ep_get_UBCR(ep) & 0xfff) + 1;
+}
+
+static void pxa25x_ep_fifo_flush(struct usb_ep *_ep)
+{
+	struct pxa25x_ep        *ep;
+
+	ep = container_of(_ep, struct pxa25x_ep, ep);
+	if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) {
+		DMSG("%s, bad ep\n", __func__);
+		return;
+	}
+
+	/* toggle and halt bits stay unchanged */
+
+	/* for OUT, just read and discard the FIFO contents. */
+	if ((ep->bEndpointAddress & USB_DIR_IN) == 0) {
+		while (((udc_ep_get_UDCCS(ep)) & UDCCS_BO_RNE) != 0)
+			(void)udc_ep_get_UDDR(ep);
+		return;
+	}
+
+	/* most IN status is the same, but ISO can't stall */
+	udc_ep_set_UDCCS(ep, UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR
+		| (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
+			? 0 : UDCCS_BI_SST));
+}
+
+
+static const struct usb_ep_ops pxa25x_ep_ops = {
+	.enable		= pxa25x_ep_enable,
+	.disable	= pxa25x_ep_disable,
+
+	.alloc_request	= pxa25x_ep_alloc_request,
+	.free_request	= pxa25x_ep_free_request,
+
+	.queue		= pxa25x_ep_queue,
+	.dequeue	= pxa25x_ep_dequeue,
+
+	.set_halt	= pxa25x_ep_set_halt,
+	.fifo_status	= pxa25x_ep_fifo_status,
+	.fifo_flush	= pxa25x_ep_fifo_flush,
+};
+
+
+/* ---------------------------------------------------------------------------
+ *	device-scoped parts of the api to the usb controller hardware
+ * ---------------------------------------------------------------------------
+ */
+
+static int pxa25x_udc_get_frame(struct usb_gadget *_gadget)
+{
+	struct pxa25x_udc	*dev;
+
+	dev = container_of(_gadget, struct pxa25x_udc, gadget);
+	return ((udc_get_reg(dev, UFNRH) & 0x07) << 8) |
+		(udc_get_reg(dev, UFNRL) & 0xff);
+}
+
+static int pxa25x_udc_wakeup(struct usb_gadget *_gadget)
+{
+	struct pxa25x_udc	*udc;
+
+	udc = container_of(_gadget, struct pxa25x_udc, gadget);
+
+	/* host may not have enabled remote wakeup */
+	if ((udc_ep0_get_UDCCS(udc) & UDCCS0_DRWF) == 0)
+		return -EHOSTUNREACH;
+	udc_set_mask_UDCCR(udc, UDCCR_RSM);
+	return 0;
+}
+
+static void stop_activity(struct pxa25x_udc *, struct usb_gadget_driver *);
+static void udc_enable (struct pxa25x_udc *);
+static void udc_disable(struct pxa25x_udc *);
+
+/* We disable the UDC -- and its 48 MHz clock -- whenever it's not
+ * in active use.
+ */
+static int pullup(struct pxa25x_udc *udc)
+{
+	int is_active = udc->vbus && udc->pullup && !udc->suspended;
+	DMSG("%s\n", is_active ? "active" : "inactive");
+	if (is_active) {
+		if (!udc->active) {
+			udc->active = 1;
+			/* Enable clock for USB device */
+			clk_enable(udc->clk);
+			udc_enable(udc);
+		}
+	} else {
+		if (udc->active) {
+			if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
+				DMSG("disconnect %s\n", udc->driver
+					? udc->driver->driver.name
+					: "(no driver)");
+				stop_activity(udc, udc->driver);
+			}
+			udc_disable(udc);
+			/* Disable clock for USB device */
+			clk_disable(udc->clk);
+			udc->active = 0;
+		}
+
+	}
+	return 0;
+}
+
+/* VBUS reporting logically comes from a transceiver */
+static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
+{
+	struct pxa25x_udc	*udc;
+
+	udc = container_of(_gadget, struct pxa25x_udc, gadget);
+	udc->vbus = is_active;
+	DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
+	pullup(udc);
+	return 0;
+}
+
+/* drivers may have software control over D+ pullup */
+static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active)
+{
+	struct pxa25x_udc	*udc;
+
+	udc = container_of(_gadget, struct pxa25x_udc, gadget);
+
+	/* not all boards support pullup control */
+	if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
+		return -EOPNOTSUPP;
+
+	udc->pullup = (is_active != 0);
+	pullup(udc);
+	return 0;
+}
+
+/* boards may consume current from VBUS, up to 100-500mA based on config.
+ * the 500uA suspend ceiling means that exclusively vbus-powered PXA designs
+ * violate USB specs.
+ */
+static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
+{
+	struct pxa25x_udc	*udc;
+
+	udc = container_of(_gadget, struct pxa25x_udc, gadget);
+
+	if (!IS_ERR_OR_NULL(udc->transceiver))
+		return usb_phy_set_power(udc->transceiver, mA);
+	return -EOPNOTSUPP;
+}
+
+static int pxa25x_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+static int pxa25x_udc_stop(struct usb_gadget *g);
+
+static const struct usb_gadget_ops pxa25x_udc_ops = {
+	.get_frame	= pxa25x_udc_get_frame,
+	.wakeup		= pxa25x_udc_wakeup,
+	.vbus_session	= pxa25x_udc_vbus_session,
+	.pullup		= pxa25x_udc_pullup,
+	.vbus_draw	= pxa25x_udc_vbus_draw,
+	.udc_start	= pxa25x_udc_start,
+	.udc_stop	= pxa25x_udc_stop,
+};
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+
+static int udc_debug_show(struct seq_file *m, void *_d)
+{
+	struct pxa25x_udc	*dev = m->private;
+	unsigned long		flags;
+	int			i;
+	u32			tmp;
+
+	local_irq_save(flags);
+
+	/* basic device status */
+	seq_printf(m, DRIVER_DESC "\n"
+		"%s version: %s\nGadget driver: %s\nHost %s\n\n",
+		driver_name, DRIVER_VERSION SIZE_STR "(pio)",
+		dev->driver ? dev->driver->driver.name : "(none)",
+		dev->gadget.speed == USB_SPEED_FULL ? "full speed" : "disconnected");
+
+	/* registers for device and ep0 */
+	seq_printf(m,
+		"uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
+		udc_get_reg(dev, UICR1), udc_get_reg(dev, UICR0),
+		udc_get_reg(dev, USIR1), udc_get_reg(dev, USIR0),
+		udc_get_reg(dev, UFNRH), udc_get_reg(dev, UFNRL));
+
+	tmp = udc_get_reg(dev, UDCCR);
+	seq_printf(m,
+		"udccr %02X =%s%s%s%s%s%s%s%s\n", tmp,
+		(tmp & UDCCR_REM) ? " rem" : "",
+		(tmp & UDCCR_RSTIR) ? " rstir" : "",
+		(tmp & UDCCR_SRM) ? " srm" : "",
+		(tmp & UDCCR_SUSIR) ? " susir" : "",
+		(tmp & UDCCR_RESIR) ? " resir" : "",
+		(tmp & UDCCR_RSM) ? " rsm" : "",
+		(tmp & UDCCR_UDA) ? " uda" : "",
+		(tmp & UDCCR_UDE) ? " ude" : "");
+
+	tmp = udc_ep0_get_UDCCS(dev);
+	seq_printf(m,
+		"udccs0 %02X =%s%s%s%s%s%s%s%s\n", tmp,
+		(tmp & UDCCS0_SA) ? " sa" : "",
+		(tmp & UDCCS0_RNE) ? " rne" : "",
+		(tmp & UDCCS0_FST) ? " fst" : "",
+		(tmp & UDCCS0_SST) ? " sst" : "",
+		(tmp & UDCCS0_DRWF) ? " dwrf" : "",
+		(tmp & UDCCS0_FTF) ? " ftf" : "",
+		(tmp & UDCCS0_IPR) ? " ipr" : "",
+		(tmp & UDCCS0_OPR) ? " opr" : "");
+
+	if (dev->has_cfr) {
+		tmp = udc_get_reg(dev, UDCCFR);
+		seq_printf(m,
+			"udccfr %02X =%s%s\n", tmp,
+			(tmp & UDCCFR_AREN) ? " aren" : "",
+			(tmp & UDCCFR_ACM) ? " acm" : "");
+	}
+
+	if (dev->gadget.speed != USB_SPEED_FULL || !dev->driver)
+		goto done;
+
+	seq_printf(m, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
+		dev->stats.write.bytes, dev->stats.write.ops,
+		dev->stats.read.bytes, dev->stats.read.ops,
+		dev->stats.irqs);
+
+	/* dump endpoint queues */
+	for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
+		struct pxa25x_ep	*ep = &dev->ep [i];
+		struct pxa25x_request	*req;
+
+		if (i != 0) {
+			const struct usb_endpoint_descriptor	*desc;
+
+			desc = ep->ep.desc;
+			if (!desc)
+				continue;
+			tmp = udc_ep_get_UDCCS(&dev->ep[i]);
+			seq_printf(m,
+				"%s max %d %s udccs %02x irqs %lu\n",
+				ep->ep.name, usb_endpoint_maxp(desc),
+				"pio", tmp, ep->pio_irqs);
+			/* TODO translate all five groups of udccs bits! */
+
+		} else /* ep0 should only have one transfer queued */
+			seq_printf(m, "ep0 max 16 pio irqs %lu\n",
+				ep->pio_irqs);
+
+		if (list_empty(&ep->queue)) {
+			seq_printf(m, "\t(nothing queued)\n");
+			continue;
+		}
+		list_for_each_entry(req, &ep->queue, queue) {
+			seq_printf(m,
+					"\treq %p len %d/%d buf %p\n",
+					&req->req, req->req.actual,
+					req->req.length, req->req.buf);
+		}
+	}
+
+done:
+	local_irq_restore(flags);
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(udc_debug);
+
+#define create_debug_files(dev) \
+	do { \
+		debugfs_create_file(dev->gadget.name, \
+			S_IRUGO, NULL, dev, &udc_debug_fops); \
+	} while (0)
+#define remove_debug_files(dev) debugfs_lookup_and_remove(dev->gadget.name, NULL)
+
+#else	/* !CONFIG_USB_GADGET_DEBUG_FILES */
+
+#define create_debug_files(dev) do {} while (0)
+#define remove_debug_files(dev) do {} while (0)
+
+#endif	/* CONFIG_USB_GADGET_DEBUG_FILES */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ *	udc_disable - disable USB device controller
+ */
+static void udc_disable(struct pxa25x_udc *dev)
+{
+	/* block all irqs */
+	udc_set_mask_UDCCR(dev, UDCCR_SRM|UDCCR_REM);
+	udc_set_reg(dev, UICR0, 0xff);
+	udc_set_reg(dev, UICR1, 0xff);
+	udc_set_reg(dev, UFNRH, UFNRH_SIM);
+
+	/* if hardware supports it, disconnect from usb */
+	pullup_off();
+
+	udc_clear_mask_UDCCR(dev, UDCCR_UDE);
+
+	ep0_idle (dev);
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+}
+
+
+/*
+ *	udc_reinit - initialize software state
+ */
+static void udc_reinit(struct pxa25x_udc *dev)
+{
+	u32	i;
+
+	/* device/ep0 records init */
+	INIT_LIST_HEAD (&dev->gadget.ep_list);
+	INIT_LIST_HEAD (&dev->gadget.ep0->ep_list);
+	dev->ep0state = EP0_IDLE;
+	dev->gadget.quirk_altset_not_supp = 1;
+
+	/* basic endpoint records init */
+	for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
+		struct pxa25x_ep *ep = &dev->ep[i];
+
+		if (i != 0)
+			list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
+
+		ep->ep.desc = NULL;
+		ep->stopped = 0;
+		INIT_LIST_HEAD (&ep->queue);
+		ep->pio_irqs = 0;
+		usb_ep_set_maxpacket_limit(&ep->ep, ep->ep.maxpacket);
+	}
+
+	/* the rest was statically initialized, and is read-only */
+}
+
+/* until it's enabled, this UDC should be completely invisible
+ * to any USB host.
+ */
+static void udc_enable (struct pxa25x_udc *dev)
+{
+	udc_clear_mask_UDCCR(dev, UDCCR_UDE);
+
+	/* try to clear these bits before we enable the udc */
+	udc_ack_int_UDCCR(dev, UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR);
+
+	ep0_idle(dev);
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+	dev->stats.irqs = 0;
+
+	/*
+	 * sequence taken from chapter 12.5.10, PXA250 AppProcDevManual:
+	 * - enable UDC
+	 * - if RESET is already in progress, ack interrupt
+	 * - unmask reset interrupt
+	 */
+	udc_set_mask_UDCCR(dev, UDCCR_UDE);
+	if (!(udc_get_reg(dev, UDCCR) & UDCCR_UDA))
+		udc_ack_int_UDCCR(dev, UDCCR_RSTIR);
+
+	if (dev->has_cfr /* UDC_RES2 is defined */) {
+		/* pxa255 (a0+) can avoid a set_config race that could
+		 * prevent gadget drivers from configuring correctly
+		 */
+		udc_set_reg(dev, UDCCFR, UDCCFR_ACM | UDCCFR_MB1);
+	} else {
+		/* "USB test mode" for pxa250 errata 40-42 (stepping a0, a1)
+		 * which could result in missing packets and interrupts.
+		 * supposedly one bit per endpoint, controlling whether it
+		 * double buffers or not; ACM/AREN bits fit into the holes.
+		 * zero bits (like USIR0_IRx) disable double buffering.
+		 */
+		udc_set_reg(dev, UDC_RES1, 0x00);
+		udc_set_reg(dev, UDC_RES2, 0x00);
+	}
+
+	/* enable suspend/resume and reset irqs */
+	udc_clear_mask_UDCCR(dev, UDCCR_SRM | UDCCR_REM);
+
+	/* enable ep0 irqs */
+	udc_set_reg(dev, UICR0, udc_get_reg(dev, UICR0) & ~UICR0_IM0);
+
+	/* if hardware supports it, pullup D+ and wait for reset */
+	pullup_on();
+}
+
+
+/* when a driver is successfully registered, it will receive
+ * control requests including set_configuration(), which enables
+ * non-control requests.  then usb traffic follows until a
+ * disconnect is reported.  then a host may connect again, or
+ * the driver might get unbound.
+ */
+static int pxa25x_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct pxa25x_udc	*dev = to_pxa25x(g);
+	int			retval;
+
+	/* first hook up the driver ... */
+	dev->driver = driver;
+	dev->pullup = 1;
+
+	/* ... then enable host detection and ep0; and we're ready
+	 * for set_configuration as well as eventual disconnect.
+	 */
+	/* connect to bus through transceiver */
+	if (!IS_ERR_OR_NULL(dev->transceiver)) {
+		retval = otg_set_peripheral(dev->transceiver->otg,
+						&dev->gadget);
+		if (retval)
+			goto bind_fail;
+	}
+
+	dump_state(dev);
+	return 0;
+bind_fail:
+	return retval;
+}
+
+static void
+reset_gadget(struct pxa25x_udc *dev, struct usb_gadget_driver *driver)
+{
+	int i;
+
+	/* don't disconnect drivers more than once */
+	if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+
+	/* prevent new request submissions, kill any outstanding requests  */
+	for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
+		struct pxa25x_ep *ep = &dev->ep[i];
+
+		ep->stopped = 1;
+		nuke(ep, -ESHUTDOWN);
+	}
+	del_timer_sync(&dev->timer);
+
+	/* report reset; the driver is already quiesced */
+	if (driver)
+		usb_gadget_udc_reset(&dev->gadget, driver);
+
+	/* re-init driver-visible data structures */
+	udc_reinit(dev);
+}
+
+static void
+stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver)
+{
+	int i;
+
+	/* don't disconnect drivers more than once */
+	if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+
+	/* prevent new request submissions, kill any outstanding requests  */
+	for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
+		struct pxa25x_ep *ep = &dev->ep[i];
+
+		ep->stopped = 1;
+		nuke(ep, -ESHUTDOWN);
+	}
+	del_timer_sync(&dev->timer);
+
+	/* report disconnect; the driver is already quiesced */
+	if (driver)
+		driver->disconnect(&dev->gadget);
+
+	/* re-init driver-visible data structures */
+	udc_reinit(dev);
+}
+
+static int pxa25x_udc_stop(struct usb_gadget*g)
+{
+	struct pxa25x_udc	*dev = to_pxa25x(g);
+
+	local_irq_disable();
+	dev->pullup = 0;
+	stop_activity(dev, NULL);
+	local_irq_enable();
+
+	if (!IS_ERR_OR_NULL(dev->transceiver))
+		(void) otg_set_peripheral(dev->transceiver->otg, NULL);
+
+	dev->driver = NULL;
+
+	dump_state(dev);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_LUBBOCK
+
+/* Lubbock has separate connect and disconnect irqs.  More typical designs
+ * use one GPIO as the VBUS IRQ, and another to control the D+ pullup.
+ */
+
+static irqreturn_t
+lubbock_vbus_irq(int irq, void *_dev)
+{
+	struct pxa25x_udc	*dev = _dev;
+	int			vbus;
+
+	dev->stats.irqs++;
+	if (irq == dev->usb_irq) {
+		vbus = 1;
+		disable_irq(dev->usb_irq);
+		enable_irq(dev->usb_disc_irq);
+	} else if (irq == dev->usb_disc_irq) {
+		vbus = 0;
+		disable_irq(dev->usb_disc_irq);
+		enable_irq(dev->usb_irq);
+	} else {
+		return IRQ_NONE;
+	}
+
+	pxa25x_udc_vbus_session(&dev->gadget, vbus);
+	return IRQ_HANDLED;
+}
+
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+static inline void clear_ep_state (struct pxa25x_udc *dev)
+{
+	unsigned i;
+
+	/* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint
+	 * fifos, and pending transactions mustn't be continued in any case.
+	 */
+	for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++)
+		nuke(&dev->ep[i], -ECONNABORTED);
+}
+
+static void udc_watchdog(struct timer_list *t)
+{
+	struct pxa25x_udc	*dev = from_timer(dev, t, timer);
+
+	local_irq_disable();
+	if (dev->ep0state == EP0_STALL
+			&& (udc_ep0_get_UDCCS(dev) & UDCCS0_FST) == 0
+			&& (udc_ep0_get_UDCCS(dev) & UDCCS0_SST) == 0) {
+		udc_ep0_set_UDCCS(dev, UDCCS0_FST|UDCCS0_FTF);
+		DBG(DBG_VERBOSE, "ep0 re-stall\n");
+		start_watchdog(dev);
+	}
+	local_irq_enable();
+}
+
+static void handle_ep0 (struct pxa25x_udc *dev)
+{
+	u32			udccs0 = udc_ep0_get_UDCCS(dev);
+	struct pxa25x_ep	*ep = &dev->ep [0];
+	struct pxa25x_request	*req;
+	union {
+		struct usb_ctrlrequest	r;
+		u8			raw [8];
+		u32			word [2];
+	} u;
+
+	if (list_empty(&ep->queue))
+		req = NULL;
+	else
+		req = list_entry(ep->queue.next, struct pxa25x_request, queue);
+
+	/* clear stall status */
+	if (udccs0 & UDCCS0_SST) {
+		nuke(ep, -EPIPE);
+		udc_ep0_set_UDCCS(dev, UDCCS0_SST);
+		del_timer(&dev->timer);
+		ep0_idle(dev);
+	}
+
+	/* previous request unfinished?  non-error iff back-to-back ... */
+	if ((udccs0 & UDCCS0_SA) != 0 && dev->ep0state != EP0_IDLE) {
+		nuke(ep, 0);
+		del_timer(&dev->timer);
+		ep0_idle(dev);
+	}
+
+	switch (dev->ep0state) {
+	case EP0_IDLE:
+		/* late-breaking status? */
+		udccs0 = udc_ep0_get_UDCCS(dev);
+
+		/* start control request? */
+		if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))
+				== (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))) {
+			int i;
+
+			nuke (ep, -EPROTO);
+
+			/* read SETUP packet */
+			for (i = 0; i < 8; i++) {
+				if (unlikely(!(udc_ep0_get_UDCCS(dev) & UDCCS0_RNE))) {
+bad_setup:
+					DMSG("SETUP %d!\n", i);
+					goto stall;
+				}
+				u.raw [i] = (u8) UDDR0;
+			}
+			if (unlikely((udc_ep0_get_UDCCS(dev) & UDCCS0_RNE) != 0))
+				goto bad_setup;
+
+got_setup:
+			DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+				u.r.bRequestType, u.r.bRequest,
+				le16_to_cpu(u.r.wValue),
+				le16_to_cpu(u.r.wIndex),
+				le16_to_cpu(u.r.wLength));
+
+			/* cope with automagic for some standard requests. */
+			dev->req_std = (u.r.bRequestType & USB_TYPE_MASK)
+						== USB_TYPE_STANDARD;
+			dev->req_config = 0;
+			dev->req_pending = 1;
+			switch (u.r.bRequest) {
+			/* hardware restricts gadget drivers here! */
+			case USB_REQ_SET_CONFIGURATION:
+				if (u.r.bRequestType == USB_RECIP_DEVICE) {
+					/* reflect hardware's automagic
+					 * up to the gadget driver.
+					 */
+config_change:
+					dev->req_config = 1;
+					clear_ep_state(dev);
+					/* if !has_cfr, there's no synch
+					 * else use AREN (later) not SA|OPR
+					 * USIR0_IR0 acts edge sensitive
+					 */
+				}
+				break;
+			/* ... and here, even more ... */
+			case USB_REQ_SET_INTERFACE:
+				if (u.r.bRequestType == USB_RECIP_INTERFACE) {
+					/* udc hardware is broken by design:
+					 *  - altsetting may only be zero;
+					 *  - hw resets all interfaces' eps;
+					 *  - ep reset doesn't include halt(?).
+					 */
+					DMSG("broken set_interface (%d/%d)\n",
+						le16_to_cpu(u.r.wIndex),
+						le16_to_cpu(u.r.wValue));
+					goto config_change;
+				}
+				break;
+			/* hardware was supposed to hide this */
+			case USB_REQ_SET_ADDRESS:
+				if (u.r.bRequestType == USB_RECIP_DEVICE) {
+					ep0start(dev, 0, "address");
+					return;
+				}
+				break;
+			}
+
+			if (u.r.bRequestType & USB_DIR_IN)
+				dev->ep0state = EP0_IN_DATA_PHASE;
+			else
+				dev->ep0state = EP0_OUT_DATA_PHASE;
+
+			i = dev->driver->setup(&dev->gadget, &u.r);
+			if (i < 0) {
+				/* hardware automagic preventing STALL... */
+				if (dev->req_config) {
+					/* hardware sometimes neglects to tell
+					 * tell us about config change events,
+					 * so later ones may fail...
+					 */
+					WARNING("config change %02x fail %d?\n",
+						u.r.bRequest, i);
+					return;
+					/* TODO experiment:  if has_cfr,
+					 * hardware didn't ACK; maybe we
+					 * could actually STALL!
+					 */
+				}
+				DBG(DBG_VERBOSE, "protocol STALL, "
+					"%02x err %d\n", udc_ep0_get_UDCCS(dev), i);
+stall:
+				/* the watchdog timer helps deal with cases
+				 * where udc seems to clear FST wrongly, and
+				 * then NAKs instead of STALLing.
+				 */
+				ep0start(dev, UDCCS0_FST|UDCCS0_FTF, "stall");
+				start_watchdog(dev);
+				dev->ep0state = EP0_STALL;
+
+			/* deferred i/o == no response yet */
+			} else if (dev->req_pending) {
+				if (likely(dev->ep0state == EP0_IN_DATA_PHASE
+						|| dev->req_std || u.r.wLength))
+					ep0start(dev, 0, "defer");
+				else
+					ep0start(dev, UDCCS0_IPR, "defer/IPR");
+			}
+
+			/* expect at least one data or status stage irq */
+			return;
+
+		} else if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA))
+				== (UDCCS0_OPR|UDCCS0_SA))) {
+			unsigned i;
+
+			/* pxa210/250 erratum 131 for B0/B1 says RNE lies.
+			 * still observed on a pxa255 a0.
+			 */
+			DBG(DBG_VERBOSE, "e131\n");
+			nuke(ep, -EPROTO);
+
+			/* read SETUP data, but don't trust it too much */
+			for (i = 0; i < 8; i++)
+				u.raw [i] = (u8) UDDR0;
+			if ((u.r.bRequestType & USB_RECIP_MASK)
+					> USB_RECIP_OTHER)
+				goto stall;
+			if (u.word [0] == 0 && u.word [1] == 0)
+				goto stall;
+			goto got_setup;
+		} else {
+			/* some random early IRQ:
+			 * - we acked FST
+			 * - IPR cleared
+			 * - OPR got set, without SA (likely status stage)
+			 */
+			udc_ep0_set_UDCCS(dev, udccs0 & (UDCCS0_SA|UDCCS0_OPR));
+		}
+		break;
+	case EP0_IN_DATA_PHASE:			/* GET_DESCRIPTOR etc */
+		if (udccs0 & UDCCS0_OPR) {
+			udc_ep0_set_UDCCS(dev, UDCCS0_OPR|UDCCS0_FTF);
+			DBG(DBG_VERBOSE, "ep0in premature status\n");
+			if (req)
+				done(ep, req, 0);
+			ep0_idle(dev);
+		} else /* irq was IPR clearing */ {
+			if (req) {
+				/* this IN packet might finish the request */
+				(void) write_ep0_fifo(ep, req);
+			} /* else IN token before response was written */
+		}
+		break;
+	case EP0_OUT_DATA_PHASE:		/* SET_DESCRIPTOR etc */
+		if (udccs0 & UDCCS0_OPR) {
+			if (req) {
+				/* this OUT packet might finish the request */
+				if (read_ep0_fifo(ep, req))
+					done(ep, req, 0);
+				/* else more OUT packets expected */
+			} /* else OUT token before read was issued */
+		} else /* irq was IPR clearing */ {
+			DBG(DBG_VERBOSE, "ep0out premature status\n");
+			if (req)
+				done(ep, req, 0);
+			ep0_idle(dev);
+		}
+		break;
+	case EP0_END_XFER:
+		if (req)
+			done(ep, req, 0);
+		/* ack control-IN status (maybe in-zlp was skipped)
+		 * also appears after some config change events.
+		 */
+		if (udccs0 & UDCCS0_OPR)
+			udc_ep0_set_UDCCS(dev, UDCCS0_OPR);
+		ep0_idle(dev);
+		break;
+	case EP0_STALL:
+		udc_ep0_set_UDCCS(dev, UDCCS0_FST);
+		break;
+	}
+	udc_set_reg(dev, USIR0, USIR0_IR0);
+}
+
+static void handle_ep(struct pxa25x_ep *ep)
+{
+	struct pxa25x_request	*req;
+	int			is_in = ep->bEndpointAddress & USB_DIR_IN;
+	int			completed;
+	u32			udccs, tmp;
+
+	do {
+		completed = 0;
+		if (likely (!list_empty(&ep->queue)))
+			req = list_entry(ep->queue.next,
+					struct pxa25x_request, queue);
+		else
+			req = NULL;
+
+		// TODO check FST handling
+
+		udccs = udc_ep_get_UDCCS(ep);
+		if (unlikely(is_in)) {	/* irq from TPC, SST, or (ISO) TUR */
+			tmp = UDCCS_BI_TUR;
+			if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK))
+				tmp |= UDCCS_BI_SST;
+			tmp &= udccs;
+			if (likely (tmp))
+				udc_ep_set_UDCCS(ep, tmp);
+			if (req && likely ((udccs & UDCCS_BI_TFS) != 0))
+				completed = write_fifo(ep, req);
+
+		} else {	/* irq from RPC (or for ISO, ROF) */
+			if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK))
+				tmp = UDCCS_BO_SST | UDCCS_BO_DME;
+			else
+				tmp = UDCCS_IO_ROF | UDCCS_IO_DME;
+			tmp &= udccs;
+			if (likely(tmp))
+				udc_ep_set_UDCCS(ep, tmp);
+
+			/* fifos can hold packets, ready for reading... */
+			if (likely(req)) {
+				completed = read_fifo(ep, req);
+			} else
+				pio_irq_disable(ep);
+		}
+		ep->pio_irqs++;
+	} while (completed);
+}
+
+/*
+ *	pxa25x_udc_irq - interrupt handler
+ *
+ * avoid delays in ep0 processing. the control handshaking isn't always
+ * under software control (pxa250c0 and the pxa255 are better), and delays
+ * could cause usb protocol errors.
+ */
+static irqreturn_t
+pxa25x_udc_irq(int irq, void *_dev)
+{
+	struct pxa25x_udc	*dev = _dev;
+	int			handled;
+
+	dev->stats.irqs++;
+	do {
+		u32		udccr = udc_get_reg(dev, UDCCR);
+
+		handled = 0;
+
+		/* SUSpend Interrupt Request */
+		if (unlikely(udccr & UDCCR_SUSIR)) {
+			udc_ack_int_UDCCR(dev, UDCCR_SUSIR);
+			handled = 1;
+			DBG(DBG_VERBOSE, "USB suspend\n");
+
+			if (dev->gadget.speed != USB_SPEED_UNKNOWN
+					&& dev->driver
+					&& dev->driver->suspend)
+				dev->driver->suspend(&dev->gadget);
+			ep0_idle (dev);
+		}
+
+		/* RESume Interrupt Request */
+		if (unlikely(udccr & UDCCR_RESIR)) {
+			udc_ack_int_UDCCR(dev, UDCCR_RESIR);
+			handled = 1;
+			DBG(DBG_VERBOSE, "USB resume\n");
+
+			if (dev->gadget.speed != USB_SPEED_UNKNOWN
+					&& dev->driver
+					&& dev->driver->resume)
+				dev->driver->resume(&dev->gadget);
+		}
+
+		/* ReSeT Interrupt Request - USB reset */
+		if (unlikely(udccr & UDCCR_RSTIR)) {
+			udc_ack_int_UDCCR(dev, UDCCR_RSTIR);
+			handled = 1;
+
+			if ((udc_get_reg(dev, UDCCR) & UDCCR_UDA) == 0) {
+				DBG(DBG_VERBOSE, "USB reset start\n");
+
+				/* reset driver and endpoints,
+				 * in case that's not yet done
+				 */
+				reset_gadget(dev, dev->driver);
+
+			} else {
+				DBG(DBG_VERBOSE, "USB reset end\n");
+				dev->gadget.speed = USB_SPEED_FULL;
+				memset(&dev->stats, 0, sizeof dev->stats);
+				/* driver and endpoints are still reset */
+			}
+
+		} else {
+			u32	usir0 = udc_get_reg(dev, USIR0) &
+					~udc_get_reg(dev, UICR0);
+			u32	usir1 = udc_get_reg(dev, USIR1) &
+					~udc_get_reg(dev, UICR1);
+			int	i;
+
+			if (unlikely (!usir0 && !usir1))
+				continue;
+
+			DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", usir1, usir0);
+
+			/* control traffic */
+			if (usir0 & USIR0_IR0) {
+				dev->ep[0].pio_irqs++;
+				handle_ep0(dev);
+				handled = 1;
+			}
+
+			/* endpoint data transfers */
+			for (i = 0; i < 8; i++) {
+				u32	tmp = 1 << i;
+
+				if (i && (usir0 & tmp)) {
+					handle_ep(&dev->ep[i]);
+					udc_set_reg(dev, USIR0,
+						udc_get_reg(dev, USIR0) | tmp);
+					handled = 1;
+				}
+#ifndef	CONFIG_USB_PXA25X_SMALL
+				if (usir1 & tmp) {
+					handle_ep(&dev->ep[i+8]);
+					udc_set_reg(dev, USIR1,
+						udc_get_reg(dev, USIR1) | tmp);
+					handled = 1;
+				}
+#endif
+			}
+		}
+
+		/* we could also ask for 1 msec SOF (SIR) interrupts */
+
+	} while (handled);
+	return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void nop_release (struct device *dev)
+{
+	DMSG("%s %s\n", __func__, dev_name(dev));
+}
+
+/* this uses load-time allocation and initialization (instead of
+ * doing it at run-time) to save code, eliminate fault paths, and
+ * be more obviously correct.
+ */
+static struct pxa25x_udc memory = {
+	.gadget = {
+		.ops		= &pxa25x_udc_ops,
+		.ep0		= &memory.ep[0].ep,
+		.name		= driver_name,
+		.dev = {
+			.init_name	= "gadget",
+			.release	= nop_release,
+		},
+	},
+
+	/* control endpoint */
+	.ep[0] = {
+		.ep = {
+			.name		= ep0name,
+			.ops		= &pxa25x_ep_ops,
+			.maxpacket	= EP0_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL,
+						USB_EP_CAPS_DIR_ALL),
+		},
+		.dev		= &memory,
+		.regoff_udccs	= UDCCS0,
+		.regoff_uddr	= UDDR0,
+	},
+
+	/* first group of endpoints */
+	.ep[1] = {
+		.ep = {
+			.name		= "ep1in-bulk",
+			.ops		= &pxa25x_ep_ops,
+			.maxpacket	= BULK_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_IN),
+		},
+		.dev		= &memory,
+		.fifo_size	= BULK_FIFO_SIZE,
+		.bEndpointAddress = USB_DIR_IN | 1,
+		.bmAttributes	= USB_ENDPOINT_XFER_BULK,
+		.regoff_udccs	= UDCCS1,
+		.regoff_uddr	= UDDR1,
+	},
+	.ep[2] = {
+		.ep = {
+			.name		= "ep2out-bulk",
+			.ops		= &pxa25x_ep_ops,
+			.maxpacket	= BULK_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_OUT),
+		},
+		.dev		= &memory,
+		.fifo_size	= BULK_FIFO_SIZE,
+		.bEndpointAddress = 2,
+		.bmAttributes	= USB_ENDPOINT_XFER_BULK,
+		.regoff_udccs	= UDCCS2,
+		.regoff_ubcr	= UBCR2,
+		.regoff_uddr	= UDDR2,
+	},
+#ifndef CONFIG_USB_PXA25X_SMALL
+	.ep[3] = {
+		.ep = {
+			.name		= "ep3in-iso",
+			.ops		= &pxa25x_ep_ops,
+			.maxpacket	= ISO_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+						USB_EP_CAPS_DIR_IN),
+		},
+		.dev		= &memory,
+		.fifo_size	= ISO_FIFO_SIZE,
+		.bEndpointAddress = USB_DIR_IN | 3,
+		.bmAttributes	= USB_ENDPOINT_XFER_ISOC,
+		.regoff_udccs	= UDCCS3,
+		.regoff_uddr	= UDDR3,
+	},
+	.ep[4] = {
+		.ep = {
+			.name		= "ep4out-iso",
+			.ops		= &pxa25x_ep_ops,
+			.maxpacket	= ISO_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+						USB_EP_CAPS_DIR_OUT),
+		},
+		.dev		= &memory,
+		.fifo_size	= ISO_FIFO_SIZE,
+		.bEndpointAddress = 4,
+		.bmAttributes	= USB_ENDPOINT_XFER_ISOC,
+		.regoff_udccs	= UDCCS4,
+		.regoff_ubcr	= UBCR4,
+		.regoff_uddr	= UDDR4,
+	},
+	.ep[5] = {
+		.ep = {
+			.name		= "ep5in-int",
+			.ops		= &pxa25x_ep_ops,
+			.maxpacket	= INT_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(0, 0),
+		},
+		.dev		= &memory,
+		.fifo_size	= INT_FIFO_SIZE,
+		.bEndpointAddress = USB_DIR_IN | 5,
+		.bmAttributes	= USB_ENDPOINT_XFER_INT,
+		.regoff_udccs	= UDCCS5,
+		.regoff_uddr	= UDDR5,
+	},
+
+	/* second group of endpoints */
+	.ep[6] = {
+		.ep = {
+			.name		= "ep6in-bulk",
+			.ops		= &pxa25x_ep_ops,
+			.maxpacket	= BULK_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_IN),
+		},
+		.dev		= &memory,
+		.fifo_size	= BULK_FIFO_SIZE,
+		.bEndpointAddress = USB_DIR_IN | 6,
+		.bmAttributes	= USB_ENDPOINT_XFER_BULK,
+		.regoff_udccs	= UDCCS6,
+		.regoff_uddr	= UDDR6,
+	},
+	.ep[7] = {
+		.ep = {
+			.name		= "ep7out-bulk",
+			.ops		= &pxa25x_ep_ops,
+			.maxpacket	= BULK_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_OUT),
+		},
+		.dev		= &memory,
+		.fifo_size	= BULK_FIFO_SIZE,
+		.bEndpointAddress = 7,
+		.bmAttributes	= USB_ENDPOINT_XFER_BULK,
+		.regoff_udccs	= UDCCS7,
+		.regoff_ubcr	= UBCR7,
+		.regoff_uddr	= UDDR7,
+	},
+	.ep[8] = {
+		.ep = {
+			.name		= "ep8in-iso",
+			.ops		= &pxa25x_ep_ops,
+			.maxpacket	= ISO_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+						USB_EP_CAPS_DIR_IN),
+		},
+		.dev		= &memory,
+		.fifo_size	= ISO_FIFO_SIZE,
+		.bEndpointAddress = USB_DIR_IN | 8,
+		.bmAttributes	= USB_ENDPOINT_XFER_ISOC,
+		.regoff_udccs	= UDCCS8,
+		.regoff_uddr	= UDDR8,
+	},
+	.ep[9] = {
+		.ep = {
+			.name		= "ep9out-iso",
+			.ops		= &pxa25x_ep_ops,
+			.maxpacket	= ISO_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+						USB_EP_CAPS_DIR_OUT),
+		},
+		.dev		= &memory,
+		.fifo_size	= ISO_FIFO_SIZE,
+		.bEndpointAddress = 9,
+		.bmAttributes	= USB_ENDPOINT_XFER_ISOC,
+		.regoff_udccs	= UDCCS9,
+		.regoff_ubcr	= UBCR9,
+		.regoff_uddr	= UDDR9,
+	},
+	.ep[10] = {
+		.ep = {
+			.name		= "ep10in-int",
+			.ops		= &pxa25x_ep_ops,
+			.maxpacket	= INT_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(0, 0),
+		},
+		.dev		= &memory,
+		.fifo_size	= INT_FIFO_SIZE,
+		.bEndpointAddress = USB_DIR_IN | 10,
+		.bmAttributes	= USB_ENDPOINT_XFER_INT,
+		.regoff_udccs	= UDCCS10,
+		.regoff_uddr	= UDDR10,
+	},
+
+	/* third group of endpoints */
+	.ep[11] = {
+		.ep = {
+			.name		= "ep11in-bulk",
+			.ops		= &pxa25x_ep_ops,
+			.maxpacket	= BULK_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_IN),
+		},
+		.dev		= &memory,
+		.fifo_size	= BULK_FIFO_SIZE,
+		.bEndpointAddress = USB_DIR_IN | 11,
+		.bmAttributes	= USB_ENDPOINT_XFER_BULK,
+		.regoff_udccs	= UDCCS11,
+		.regoff_uddr	= UDDR11,
+	},
+	.ep[12] = {
+		.ep = {
+			.name		= "ep12out-bulk",
+			.ops		= &pxa25x_ep_ops,
+			.maxpacket	= BULK_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_OUT),
+		},
+		.dev		= &memory,
+		.fifo_size	= BULK_FIFO_SIZE,
+		.bEndpointAddress = 12,
+		.bmAttributes	= USB_ENDPOINT_XFER_BULK,
+		.regoff_udccs	= UDCCS12,
+		.regoff_ubcr	= UBCR12,
+		.regoff_uddr	= UDDR12,
+	},
+	.ep[13] = {
+		.ep = {
+			.name		= "ep13in-iso",
+			.ops		= &pxa25x_ep_ops,
+			.maxpacket	= ISO_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+						USB_EP_CAPS_DIR_IN),
+		},
+		.dev		= &memory,
+		.fifo_size	= ISO_FIFO_SIZE,
+		.bEndpointAddress = USB_DIR_IN | 13,
+		.bmAttributes	= USB_ENDPOINT_XFER_ISOC,
+		.regoff_udccs	= UDCCS13,
+		.regoff_uddr	= UDDR13,
+	},
+	.ep[14] = {
+		.ep = {
+			.name		= "ep14out-iso",
+			.ops		= &pxa25x_ep_ops,
+			.maxpacket	= ISO_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+						USB_EP_CAPS_DIR_OUT),
+		},
+		.dev		= &memory,
+		.fifo_size	= ISO_FIFO_SIZE,
+		.bEndpointAddress = 14,
+		.bmAttributes	= USB_ENDPOINT_XFER_ISOC,
+		.regoff_udccs	= UDCCS14,
+		.regoff_ubcr	= UBCR14,
+		.regoff_uddr	= UDDR14,
+	},
+	.ep[15] = {
+		.ep = {
+			.name		= "ep15in-int",
+			.ops		= &pxa25x_ep_ops,
+			.maxpacket	= INT_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(0, 0),
+		},
+		.dev		= &memory,
+		.fifo_size	= INT_FIFO_SIZE,
+		.bEndpointAddress = USB_DIR_IN | 15,
+		.bmAttributes	= USB_ENDPOINT_XFER_INT,
+		.regoff_udccs	= UDCCS15,
+		.regoff_uddr	= UDDR15,
+	},
+#endif /* !CONFIG_USB_PXA25X_SMALL */
+};
+
+#define CP15R0_VENDOR_MASK	0xffffe000
+
+#if	defined(CONFIG_ARCH_PXA)
+#define CP15R0_XSCALE_VALUE	0x69052000	/* intel/arm/xscale */
+
+#elif	defined(CONFIG_ARCH_IXP4XX)
+#define CP15R0_XSCALE_VALUE	0x69054000	/* intel/arm/ixp4xx */
+
+#endif
+
+#define CP15R0_PROD_MASK	0x000003f0
+#define PXA25x			0x00000100	/* and PXA26x */
+#define PXA210			0x00000120
+
+#define CP15R0_REV_MASK		0x0000000f
+
+#define CP15R0_PRODREV_MASK	(CP15R0_PROD_MASK | CP15R0_REV_MASK)
+
+#define PXA255_A0		0x00000106	/* or PXA260_B1 */
+#define PXA250_C0		0x00000105	/* or PXA26x_B0 */
+#define PXA250_B2		0x00000104
+#define PXA250_B1		0x00000103	/* or PXA260_A0 */
+#define PXA250_B0		0x00000102
+#define PXA250_A1		0x00000101
+#define PXA250_A0		0x00000100
+
+#define PXA210_C0		0x00000125
+#define PXA210_B2		0x00000124
+#define PXA210_B1		0x00000123
+#define PXA210_B0		0x00000122
+#define IXP425_A0		0x000001c1
+#define IXP425_B0		0x000001f1
+#define IXP465_AD		0x00000200
+
+/*
+ *	probe - binds to the platform device
+ */
+static int pxa25x_udc_probe(struct platform_device *pdev)
+{
+	struct pxa25x_udc *dev = &memory;
+	int retval, irq;
+	u32 chiprev;
+
+	pr_info("%s: version %s\n", driver_name, DRIVER_VERSION);
+
+	/* insist on Intel/ARM/XScale */
+	asm("mrc p15, 0, %0, c0, c0" : "=r" (chiprev));
+	if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) {
+		pr_err("%s: not XScale!\n", driver_name);
+		return -ENODEV;
+	}
+
+	/* trigger chiprev-specific logic */
+	switch (chiprev & CP15R0_PRODREV_MASK) {
+#if	defined(CONFIG_ARCH_PXA)
+	case PXA255_A0:
+		dev->has_cfr = 1;
+		break;
+	case PXA250_A0:
+	case PXA250_A1:
+		/* A0/A1 "not released"; ep 13, 15 unusable */
+		fallthrough;
+	case PXA250_B2: case PXA210_B2:
+	case PXA250_B1: case PXA210_B1:
+	case PXA250_B0: case PXA210_B0:
+		/* OUT-DMA is broken ... */
+		fallthrough;
+	case PXA250_C0: case PXA210_C0:
+		break;
+#elif	defined(CONFIG_ARCH_IXP4XX)
+	case IXP425_A0:
+	case IXP425_B0:
+	case IXP465_AD:
+		dev->has_cfr = 1;
+		break;
+#endif
+	default:
+		pr_err("%s: unrecognized processor: %08x\n",
+			driver_name, chiprev);
+		/* iop3xx, ixp4xx, ... */
+		return -ENODEV;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	dev->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(dev->regs))
+		return PTR_ERR(dev->regs);
+
+	dev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dev->clk))
+		return PTR_ERR(dev->clk);
+
+	pr_debug("%s: IRQ %d%s%s\n", driver_name, irq,
+		dev->has_cfr ? "" : " (!cfr)",
+		SIZE_STR "(pio)"
+		);
+
+	/* other non-static parts of init */
+	dev->dev = &pdev->dev;
+	dev->mach = dev_get_platdata(&pdev->dev);
+
+	dev->transceiver = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
+
+	if (gpio_is_valid(dev->mach->gpio_pullup)) {
+		retval = devm_gpio_request(&pdev->dev, dev->mach->gpio_pullup,
+					   "pca25x_udc GPIO PULLUP");
+		if (retval) {
+			dev_dbg(&pdev->dev,
+				"can't get pullup gpio %d, err: %d\n",
+				dev->mach->gpio_pullup, retval);
+			goto err;
+		}
+		gpio_direction_output(dev->mach->gpio_pullup, 0);
+	}
+
+	timer_setup(&dev->timer, udc_watchdog, 0);
+
+	the_controller = dev;
+	platform_set_drvdata(pdev, dev);
+
+	udc_disable(dev);
+	udc_reinit(dev);
+
+	dev->vbus = 0;
+
+	/* irq setup after old hardware state is cleaned up */
+	retval = devm_request_irq(&pdev->dev, irq, pxa25x_udc_irq, 0,
+				  driver_name, dev);
+	if (retval != 0) {
+		pr_err("%s: can't get irq %d, err %d\n",
+			driver_name, irq, retval);
+		goto err;
+	}
+	dev->got_irq = 1;
+
+#ifdef CONFIG_ARCH_LUBBOCK
+	if (machine_is_lubbock()) {
+		dev->usb_irq = platform_get_irq(pdev, 1);
+		if (dev->usb_irq < 0)
+			return dev->usb_irq;
+
+		dev->usb_disc_irq = platform_get_irq(pdev, 2);
+		if (dev->usb_disc_irq < 0)
+			return dev->usb_disc_irq;
+
+		retval = devm_request_irq(&pdev->dev, dev->usb_disc_irq,
+					  lubbock_vbus_irq, 0, driver_name,
+					  dev);
+		if (retval != 0) {
+			pr_err("%s: can't get irq %i, err %d\n",
+				driver_name, dev->usb_disc_irq, retval);
+			goto err;
+		}
+		retval = devm_request_irq(&pdev->dev, dev->usb_irq,
+					  lubbock_vbus_irq, 0, driver_name,
+					  dev);
+		if (retval != 0) {
+			pr_err("%s: can't get irq %i, err %d\n",
+				driver_name, dev->usb_irq, retval);
+			goto err;
+		}
+	} else
+#endif
+	create_debug_files(dev);
+
+	retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
+	if (!retval)
+		return retval;
+
+	remove_debug_files(dev);
+ err:
+	if (!IS_ERR_OR_NULL(dev->transceiver))
+		dev->transceiver = NULL;
+	return retval;
+}
+
+static void pxa25x_udc_shutdown(struct platform_device *_dev)
+{
+	pullup_off();
+}
+
+static int pxa25x_udc_remove(struct platform_device *pdev)
+{
+	struct pxa25x_udc *dev = platform_get_drvdata(pdev);
+
+	if (dev->driver)
+		return -EBUSY;
+
+	usb_del_gadget_udc(&dev->gadget);
+	dev->pullup = 0;
+	pullup(dev);
+
+	remove_debug_files(dev);
+
+	if (!IS_ERR_OR_NULL(dev->transceiver))
+		dev->transceiver = NULL;
+
+	the_controller = NULL;
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_PM
+
+/* USB suspend (controlled by the host) and system suspend (controlled
+ * by the PXA) don't necessarily work well together.  If USB is active,
+ * the 48 MHz clock is required; so the system can't enter 33 MHz idle
+ * mode, or any deeper PM saving state.
+ *
+ * For now, we punt and forcibly disconnect from the USB host when PXA
+ * enters any suspend state.  While we're disconnected, we always disable
+ * the 48MHz USB clock ... allowing PXA sleep and/or 33 MHz idle states.
+ * Boards without software pullup control shouldn't use those states.
+ * VBUS IRQs should probably be ignored so that the PXA device just acts
+ * "dead" to USB hosts until system resume.
+ */
+static int pxa25x_udc_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct pxa25x_udc	*udc = platform_get_drvdata(dev);
+	unsigned long flags;
+
+	if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
+		WARNING("USB host won't detect disconnect!\n");
+	udc->suspended = 1;
+
+	local_irq_save(flags);
+	pullup(udc);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int pxa25x_udc_resume(struct platform_device *dev)
+{
+	struct pxa25x_udc	*udc = platform_get_drvdata(dev);
+	unsigned long flags;
+
+	udc->suspended = 0;
+	local_irq_save(flags);
+	pullup(udc);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+#else
+#define	pxa25x_udc_suspend	NULL
+#define	pxa25x_udc_resume	NULL
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static struct platform_driver udc_driver = {
+	.shutdown	= pxa25x_udc_shutdown,
+	.probe		= pxa25x_udc_probe,
+	.remove		= pxa25x_udc_remove,
+	.suspend	= pxa25x_udc_suspend,
+	.resume		= pxa25x_udc_resume,
+	.driver		= {
+		.name	= "pxa25x-udc",
+	},
+};
+
+module_platform_driver(udc_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa25x-udc");
diff --git a/drivers/usb/gadget/udc/pxa25x_udc.h b/drivers/usb/gadget/udc/pxa25x_udc.h
new file mode 100644
index 000000000..6ab6047ed
--- /dev/null
+++ b/drivers/usb/gadget/udc/pxa25x_udc.h
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Intel PXA25x on-chip full speed USB device controller
+ *
+ * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2003 David Brownell
+ */
+
+#ifndef __LINUX_USB_GADGET_PXA25X_H
+#define __LINUX_USB_GADGET_PXA25X_H
+
+#include <linux/types.h>
+
+/*-------------------------------------------------------------------------*/
+
+/* pxa25x has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */
+#define UFNRH_SIR	(1 << 7)	/* SOF interrupt request */
+#define UFNRH_SIM	(1 << 6)	/* SOF interrupt mask */
+#define UFNRH_IPE14	(1 << 5)	/* ISO packet error, ep14 */
+#define UFNRH_IPE9	(1 << 4)	/* ISO packet error, ep9 */
+#define UFNRH_IPE4	(1 << 3)	/* ISO packet error, ep4 */
+
+/* pxa255 has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */
+#define	UDCCFR		UDC_RES2	/* UDC Control Function Register */
+#define UDCCFR_AREN	(1 << 7)	/* ACK response enable (now) */
+#define UDCCFR_ACM	(1 << 2)	/* ACK control mode (wait for AREN) */
+
+/* latest pxa255 errata define new "must be one" bits in UDCCFR */
+#define	UDCCFR_MB1	(0xff & ~(UDCCFR_AREN|UDCCFR_ACM))
+
+/*-------------------------------------------------------------------------*/
+
+struct pxa25x_udc;
+
+struct pxa25x_ep {
+	struct usb_ep				ep;
+	struct pxa25x_udc			*dev;
+
+	struct list_head			queue;
+	unsigned long				pio_irqs;
+
+	unsigned short				fifo_size;
+	u8					bEndpointAddress;
+	u8					bmAttributes;
+
+	unsigned				stopped : 1;
+	unsigned				dma_fixup : 1;
+
+	/* UDCCS = UDC Control/Status for this EP
+	 * UBCR = UDC Byte Count Remaining (contents of OUT fifo)
+	 * UDDR = UDC Endpoint Data Register (the fifo)
+	 * DRCM = DMA Request Channel Map
+	 */
+	u32					regoff_udccs;
+	u32					regoff_ubcr;
+	u32					regoff_uddr;
+};
+
+struct pxa25x_request {
+	struct usb_request			req;
+	struct list_head			queue;
+};
+
+enum ep0_state {
+	EP0_IDLE,
+	EP0_IN_DATA_PHASE,
+	EP0_OUT_DATA_PHASE,
+	EP0_END_XFER,
+	EP0_STALL,
+};
+
+#define EP0_FIFO_SIZE	((unsigned)16)
+#define BULK_FIFO_SIZE	((unsigned)64)
+#define ISO_FIFO_SIZE	((unsigned)256)
+#define INT_FIFO_SIZE	((unsigned)8)
+
+struct udc_stats {
+	struct ep0stats {
+		unsigned long		ops;
+		unsigned long		bytes;
+	} read, write;
+	unsigned long			irqs;
+};
+
+#ifdef CONFIG_USB_PXA25X_SMALL
+/* when memory's tight, SMALL config saves code+data.  */
+#define	PXA_UDC_NUM_ENDPOINTS	3
+#endif
+
+#ifndef	PXA_UDC_NUM_ENDPOINTS
+#define	PXA_UDC_NUM_ENDPOINTS	16
+#endif
+
+struct pxa25x_udc {
+	struct usb_gadget			gadget;
+	struct usb_gadget_driver		*driver;
+
+	enum ep0_state				ep0state;
+	struct udc_stats			stats;
+	unsigned				got_irq : 1,
+						vbus : 1,
+						pullup : 1,
+						has_cfr : 1,
+						req_pending : 1,
+						req_std : 1,
+						req_config : 1,
+						suspended : 1,
+						active : 1;
+
+#define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200))
+	struct timer_list			timer;
+
+	struct device				*dev;
+	struct clk				*clk;
+	struct pxa2xx_udc_mach_info		*mach;
+	struct usb_phy				*transceiver;
+	u64					dma_mask;
+	struct pxa25x_ep			ep [PXA_UDC_NUM_ENDPOINTS];
+	void __iomem				*regs;
+	int					usb_irq;
+	int					usb_disc_irq;
+};
+#define to_pxa25x(g)	(container_of((g), struct pxa25x_udc, gadget))
+
+/*-------------------------------------------------------------------------*/
+
+static struct pxa25x_udc *the_controller;
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Debugging support vanishes in non-debug builds.  DBG_NORMAL should be
+ * mostly silent during normal use/testing, with no timing side-effects.
+ */
+#define DBG_NORMAL	1	/* error paths, device state transitions */
+#define DBG_VERBOSE	2	/* add some success path trace info */
+#define DBG_NOISY	3	/* ... even more: request level */
+#define DBG_VERY_NOISY	4	/* ... even more: packet level */
+
+#define DMSG(stuff...)	pr_debug("udc: " stuff)
+
+#ifdef DEBUG
+
+static const char *state_name[] = {
+	"EP0_IDLE",
+	"EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE",
+	"EP0_END_XFER", "EP0_STALL"
+};
+
+#ifdef VERBOSE_DEBUG
+#    define UDC_DEBUG DBG_VERBOSE
+#else
+#    define UDC_DEBUG DBG_NORMAL
+#endif
+
+static void __maybe_unused
+dump_udccr(const char *label)
+{
+	u32	udccr = UDCCR;
+	DMSG("%s %02X =%s%s%s%s%s%s%s%s\n",
+		label, udccr,
+		(udccr & UDCCR_REM) ? " rem" : "",
+		(udccr & UDCCR_RSTIR) ? " rstir" : "",
+		(udccr & UDCCR_SRM) ? " srm" : "",
+		(udccr & UDCCR_SUSIR) ? " susir" : "",
+		(udccr & UDCCR_RESIR) ? " resir" : "",
+		(udccr & UDCCR_RSM) ? " rsm" : "",
+		(udccr & UDCCR_UDA) ? " uda" : "",
+		(udccr & UDCCR_UDE) ? " ude" : "");
+}
+
+static void __maybe_unused
+dump_udccs0(const char *label)
+{
+	u32		udccs0 = UDCCS0;
+
+	DMSG("%s %s %02X =%s%s%s%s%s%s%s%s\n",
+		label, state_name[the_controller->ep0state], udccs0,
+		(udccs0 & UDCCS0_SA) ? " sa" : "",
+		(udccs0 & UDCCS0_RNE) ? " rne" : "",
+		(udccs0 & UDCCS0_FST) ? " fst" : "",
+		(udccs0 & UDCCS0_SST) ? " sst" : "",
+		(udccs0 & UDCCS0_DRWF) ? " dwrf" : "",
+		(udccs0 & UDCCS0_FTF) ? " ftf" : "",
+		(udccs0 & UDCCS0_IPR) ? " ipr" : "",
+		(udccs0 & UDCCS0_OPR) ? " opr" : "");
+}
+
+static inline u32 udc_ep_get_UDCCS(struct pxa25x_ep *);
+
+static void __maybe_unused
+dump_state(struct pxa25x_udc *dev)
+{
+	u32		tmp;
+	unsigned	i;
+
+	DMSG("%s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
+		state_name[dev->ep0state],
+		UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
+	dump_udccr("udccr");
+	if (dev->has_cfr) {
+		tmp = UDCCFR;
+		DMSG("udccfr %02X =%s%s\n", tmp,
+			(tmp & UDCCFR_AREN) ? " aren" : "",
+			(tmp & UDCCFR_ACM) ? " acm" : "");
+	}
+
+	if (!dev->driver) {
+		DMSG("no gadget driver bound\n");
+		return;
+	} else
+		DMSG("ep0 driver '%s'\n", dev->driver->driver.name);
+
+	dump_udccs0 ("udccs0");
+	DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n",
+		dev->stats.write.bytes, dev->stats.write.ops,
+		dev->stats.read.bytes, dev->stats.read.ops);
+
+	for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) {
+		if (dev->ep[i].ep.desc == NULL)
+			continue;
+		DMSG ("udccs%d = %02x\n", i, udc_ep_get_UDCCS(&dev->ep[i]));
+	}
+}
+
+#else
+
+#define	dump_udccr(x)	do{}while(0)
+#define	dump_udccs0(x)	do{}while(0)
+#define	dump_state(x)	do{}while(0)
+
+#define UDC_DEBUG ((unsigned)0)
+
+#endif
+
+#define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0)
+
+#define ERR(stuff...)		pr_err("udc: " stuff)
+#define WARNING(stuff...)	pr_warn("udc: " stuff)
+#define INFO(stuff...)		pr_info("udc: " stuff)
+
+
+#endif /* __LINUX_USB_GADGET_PXA25X_H */
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
new file mode 100644
index 000000000..0ecdfd2ba
--- /dev/null
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -0,0 +1,2562 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Handles the Intel 27x USB Device Controller (UDC)
+ *
+ * Inspired by original driver by Frank Becker, David Brownell, and others.
+ * Copyright (C) 2008 Robert Jarzmik
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/slab.h>
+#include <linux/prefetch.h>
+#include <linux/byteorder/generic.h>
+#include <linux/platform_data/pxa2xx_udc.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/phy.h>
+
+#include "pxa27x_udc.h"
+
+/*
+ * This driver handles the USB Device Controller (UDC) in Intel's PXA 27x
+ * series processors.
+ *
+ * Such controller drivers work with a gadget driver.  The gadget driver
+ * returns descriptors, implements configuration and data protocols used
+ * by the host to interact with this device, and allocates endpoints to
+ * the different protocol interfaces.  The controller driver virtualizes
+ * usb hardware so that the gadget drivers will be more portable.
+ *
+ * This UDC hardware wants to implement a bit too much USB protocol. The
+ * biggest issues are:  that the endpoints have to be set up before the
+ * controller can be enabled (minor, and not uncommon); and each endpoint
+ * can only have one configuration, interface and alternative interface
+ * number (major, and very unusual). Once set up, these cannot be changed
+ * without a controller reset.
+ *
+ * The workaround is to setup all combinations necessary for the gadgets which
+ * will work with this driver. This is done in pxa_udc structure, statically.
+ * See pxa_udc, udc_usb_ep versus pxa_ep, and matching function find_pxa_ep.
+ * (You could modify this if needed.  Some drivers have a "fifo_mode" module
+ * parameter to facilitate such changes.)
+ *
+ * The combinations have been tested with these gadgets :
+ *  - zero gadget
+ *  - file storage gadget
+ *  - ether gadget
+ *
+ * The driver doesn't use DMA, only IO access and IRQ callbacks. No use is
+ * made of UDC's double buffering either. USB "On-The-Go" is not implemented.
+ *
+ * All the requests are handled the same way :
+ *  - the drivers tries to handle the request directly to the IO
+ *  - if the IO fifo is not big enough, the remaining is send/received in
+ *    interrupt handling.
+ */
+
+#define	DRIVER_VERSION	"2008-04-18"
+#define	DRIVER_DESC	"PXA 27x USB Device Controller driver"
+
+static const char driver_name[] = "pxa27x_udc";
+static struct pxa_udc *the_controller;
+
+static void handle_ep(struct pxa_ep *ep);
+
+/*
+ * Debug filesystem
+ */
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/seq_file.h>
+
+static int state_dbg_show(struct seq_file *s, void *p)
+{
+	struct pxa_udc *udc = s->private;
+	u32 tmp;
+
+	if (!udc->driver)
+		return -ENODEV;
+
+	/* basic device status */
+	seq_printf(s, DRIVER_DESC "\n"
+		   "%s version: %s\n"
+		   "Gadget driver: %s\n",
+		   driver_name, DRIVER_VERSION,
+		   udc->driver ? udc->driver->driver.name : "(none)");
+
+	tmp = udc_readl(udc, UDCCR);
+	seq_printf(s,
+		   "udccr=0x%0x(%s%s%s%s%s%s%s%s%s%s), con=%d,inter=%d,altinter=%d\n",
+		   tmp,
+		   (tmp & UDCCR_OEN) ? " oen":"",
+		   (tmp & UDCCR_AALTHNP) ? " aalthnp":"",
+		   (tmp & UDCCR_AHNP) ? " rem" : "",
+		   (tmp & UDCCR_BHNP) ? " rstir" : "",
+		   (tmp & UDCCR_DWRE) ? " dwre" : "",
+		   (tmp & UDCCR_SMAC) ? " smac" : "",
+		   (tmp & UDCCR_EMCE) ? " emce" : "",
+		   (tmp & UDCCR_UDR) ? " udr" : "",
+		   (tmp & UDCCR_UDA) ? " uda" : "",
+		   (tmp & UDCCR_UDE) ? " ude" : "",
+		   (tmp & UDCCR_ACN) >> UDCCR_ACN_S,
+		   (tmp & UDCCR_AIN) >> UDCCR_AIN_S,
+		   (tmp & UDCCR_AAISN) >> UDCCR_AAISN_S);
+	/* registers for device and ep0 */
+	seq_printf(s, "udcicr0=0x%08x udcicr1=0x%08x\n",
+		   udc_readl(udc, UDCICR0), udc_readl(udc, UDCICR1));
+	seq_printf(s, "udcisr0=0x%08x udcisr1=0x%08x\n",
+		   udc_readl(udc, UDCISR0), udc_readl(udc, UDCISR1));
+	seq_printf(s, "udcfnr=%d\n", udc_readl(udc, UDCFNR));
+	seq_printf(s, "irqs: reset=%lu, suspend=%lu, resume=%lu, reconfig=%lu\n",
+		   udc->stats.irqs_reset, udc->stats.irqs_suspend,
+		   udc->stats.irqs_resume, udc->stats.irqs_reconfig);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(state_dbg);
+
+static int queues_dbg_show(struct seq_file *s, void *p)
+{
+	struct pxa_udc *udc = s->private;
+	struct pxa_ep *ep;
+	struct pxa27x_request *req;
+	int i, maxpkt;
+
+	if (!udc->driver)
+		return -ENODEV;
+
+	/* dump endpoint queues */
+	for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
+		ep = &udc->pxa_ep[i];
+		maxpkt = ep->fifo_size;
+		seq_printf(s,  "%-12s max_pkt=%d %s\n",
+			   EPNAME(ep), maxpkt, "pio");
+
+		if (list_empty(&ep->queue)) {
+			seq_puts(s, "\t(nothing queued)\n");
+			continue;
+		}
+
+		list_for_each_entry(req, &ep->queue, queue) {
+			seq_printf(s,  "\treq %p len %d/%d buf %p\n",
+				   &req->req, req->req.actual,
+				   req->req.length, req->req.buf);
+		}
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(queues_dbg);
+
+static int eps_dbg_show(struct seq_file *s, void *p)
+{
+	struct pxa_udc *udc = s->private;
+	struct pxa_ep *ep;
+	int i;
+	u32 tmp;
+
+	if (!udc->driver)
+		return -ENODEV;
+
+	ep = &udc->pxa_ep[0];
+	tmp = udc_ep_readl(ep, UDCCSR);
+	seq_printf(s, "udccsr0=0x%03x(%s%s%s%s%s%s%s)\n",
+		   tmp,
+		   (tmp & UDCCSR0_SA) ? " sa" : "",
+		   (tmp & UDCCSR0_RNE) ? " rne" : "",
+		   (tmp & UDCCSR0_FST) ? " fst" : "",
+		   (tmp & UDCCSR0_SST) ? " sst" : "",
+		   (tmp & UDCCSR0_DME) ? " dme" : "",
+		   (tmp & UDCCSR0_IPR) ? " ipr" : "",
+		   (tmp & UDCCSR0_OPC) ? " opc" : "");
+	for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
+		ep = &udc->pxa_ep[i];
+		tmp = i? udc_ep_readl(ep, UDCCR) : udc_readl(udc, UDCCR);
+		seq_printf(s, "%-12s: IN %lu(%lu reqs), OUT %lu(%lu reqs), irqs=%lu, udccr=0x%08x, udccsr=0x%03x, udcbcr=%d\n",
+			   EPNAME(ep),
+			   ep->stats.in_bytes, ep->stats.in_ops,
+			   ep->stats.out_bytes, ep->stats.out_ops,
+			   ep->stats.irqs,
+			   tmp, udc_ep_readl(ep, UDCCSR),
+			   udc_ep_readl(ep, UDCBCR));
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(eps_dbg);
+
+static void pxa_init_debugfs(struct pxa_udc *udc)
+{
+	struct dentry *root;
+
+	root = debugfs_create_dir(udc->gadget.name, usb_debug_root);
+	debugfs_create_file("udcstate", 0400, root, udc, &state_dbg_fops);
+	debugfs_create_file("queues", 0400, root, udc, &queues_dbg_fops);
+	debugfs_create_file("epstate", 0400, root, udc, &eps_dbg_fops);
+}
+
+static void pxa_cleanup_debugfs(struct pxa_udc *udc)
+{
+	debugfs_lookup_and_remove(udc->gadget.name, usb_debug_root);
+}
+
+#else
+static inline void pxa_init_debugfs(struct pxa_udc *udc)
+{
+}
+
+static inline void pxa_cleanup_debugfs(struct pxa_udc *udc)
+{
+}
+#endif
+
+/**
+ * is_match_usb_pxa - check if usb_ep and pxa_ep match
+ * @udc_usb_ep: usb endpoint
+ * @ep: pxa endpoint
+ * @config: configuration required in pxa_ep
+ * @interface: interface required in pxa_ep
+ * @altsetting: altsetting required in pxa_ep
+ *
+ * Returns 1 if all criteria match between pxa and usb endpoint, 0 otherwise
+ */
+static int is_match_usb_pxa(struct udc_usb_ep *udc_usb_ep, struct pxa_ep *ep,
+		int config, int interface, int altsetting)
+{
+	if (usb_endpoint_num(&udc_usb_ep->desc) != ep->addr)
+		return 0;
+	if (usb_endpoint_dir_in(&udc_usb_ep->desc) != ep->dir_in)
+		return 0;
+	if (usb_endpoint_type(&udc_usb_ep->desc) != ep->type)
+		return 0;
+	if ((ep->config != config) || (ep->interface != interface)
+			|| (ep->alternate != altsetting))
+		return 0;
+	return 1;
+}
+
+/**
+ * find_pxa_ep - find pxa_ep structure matching udc_usb_ep
+ * @udc: pxa udc
+ * @udc_usb_ep: udc_usb_ep structure
+ *
+ * Match udc_usb_ep and all pxa_ep available, to see if one matches.
+ * This is necessary because of the strong pxa hardware restriction requiring
+ * that once pxa endpoints are initialized, their configuration is freezed, and
+ * no change can be made to their address, direction, or in which configuration,
+ * interface or altsetting they are active ... which differs from more usual
+ * models which have endpoints be roughly just addressable fifos, and leave
+ * configuration events up to gadget drivers (like all control messages).
+ *
+ * Note that there is still a blurred point here :
+ *   - we rely on UDCCR register "active interface" and "active altsetting".
+ *     This is a nonsense in regard of USB spec, where multiple interfaces are
+ *     active at the same time.
+ *   - if we knew for sure that the pxa can handle multiple interface at the
+ *     same time, assuming Intel's Developer Guide is wrong, this function
+ *     should be reviewed, and a cache of couples (iface, altsetting) should
+ *     be kept in the pxa_udc structure. In this case this function would match
+ *     against the cache of couples instead of the "last altsetting" set up.
+ *
+ * Returns the matched pxa_ep structure or NULL if none found
+ */
+static struct pxa_ep *find_pxa_ep(struct pxa_udc *udc,
+		struct udc_usb_ep *udc_usb_ep)
+{
+	int i;
+	struct pxa_ep *ep;
+	int cfg = udc->config;
+	int iface = udc->last_interface;
+	int alt = udc->last_alternate;
+
+	if (udc_usb_ep == &udc->udc_usb_ep[0])
+		return &udc->pxa_ep[0];
+
+	for (i = 1; i < NR_PXA_ENDPOINTS; i++) {
+		ep = &udc->pxa_ep[i];
+		if (is_match_usb_pxa(udc_usb_ep, ep, cfg, iface, alt))
+			return ep;
+	}
+	return NULL;
+}
+
+/**
+ * update_pxa_ep_matches - update pxa_ep cached values in all udc_usb_ep
+ * @udc: pxa udc
+ *
+ * Context: interrupt handler
+ *
+ * Updates all pxa_ep fields in udc_usb_ep structures, if this field was
+ * previously set up (and is not NULL). The update is necessary is a
+ * configuration change or altsetting change was issued by the USB host.
+ */
+static void update_pxa_ep_matches(struct pxa_udc *udc)
+{
+	int i;
+	struct udc_usb_ep *udc_usb_ep;
+
+	for (i = 1; i < NR_USB_ENDPOINTS; i++) {
+		udc_usb_ep = &udc->udc_usb_ep[i];
+		if (udc_usb_ep->pxa_ep)
+			udc_usb_ep->pxa_ep = find_pxa_ep(udc, udc_usb_ep);
+	}
+}
+
+/**
+ * pio_irq_enable - Enables irq generation for one endpoint
+ * @ep: udc endpoint
+ */
+static void pio_irq_enable(struct pxa_ep *ep)
+{
+	struct pxa_udc *udc = ep->dev;
+	int index = EPIDX(ep);
+	u32 udcicr0 = udc_readl(udc, UDCICR0);
+	u32 udcicr1 = udc_readl(udc, UDCICR1);
+
+	if (index < 16)
+		udc_writel(udc, UDCICR0, udcicr0 | (3 << (index * 2)));
+	else
+		udc_writel(udc, UDCICR1, udcicr1 | (3 << ((index - 16) * 2)));
+}
+
+/**
+ * pio_irq_disable - Disables irq generation for one endpoint
+ * @ep: udc endpoint
+ */
+static void pio_irq_disable(struct pxa_ep *ep)
+{
+	struct pxa_udc *udc = ep->dev;
+	int index = EPIDX(ep);
+	u32 udcicr0 = udc_readl(udc, UDCICR0);
+	u32 udcicr1 = udc_readl(udc, UDCICR1);
+
+	if (index < 16)
+		udc_writel(udc, UDCICR0, udcicr0 & ~(3 << (index * 2)));
+	else
+		udc_writel(udc, UDCICR1, udcicr1 & ~(3 << ((index - 16) * 2)));
+}
+
+/**
+ * udc_set_mask_UDCCR - set bits in UDCCR
+ * @udc: udc device
+ * @mask: bits to set in UDCCR
+ *
+ * Sets bits in UDCCR, leaving DME and FST bits as they were.
+ */
+static inline void udc_set_mask_UDCCR(struct pxa_udc *udc, int mask)
+{
+	u32 udccr = udc_readl(udc, UDCCR);
+	udc_writel(udc, UDCCR,
+			(udccr & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS));
+}
+
+/**
+ * udc_clear_mask_UDCCR - clears bits in UDCCR
+ * @udc: udc device
+ * @mask: bit to clear in UDCCR
+ *
+ * Clears bits in UDCCR, leaving DME and FST bits as they were.
+ */
+static inline void udc_clear_mask_UDCCR(struct pxa_udc *udc, int mask)
+{
+	u32 udccr = udc_readl(udc, UDCCR);
+	udc_writel(udc, UDCCR,
+			(udccr & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS));
+}
+
+/**
+ * ep_write_UDCCSR - set bits in UDCCSR
+ * @ep: udc endpoint
+ * @mask: bits to set in UDCCR
+ *
+ * Sets bits in UDCCSR (UDCCSR0 and UDCCSR*).
+ *
+ * A specific case is applied to ep0 : the ACM bit is always set to 1, for
+ * SET_INTERFACE and SET_CONFIGURATION.
+ */
+static inline void ep_write_UDCCSR(struct pxa_ep *ep, int mask)
+{
+	if (is_ep0(ep))
+		mask |= UDCCSR0_ACM;
+	udc_ep_writel(ep, UDCCSR, mask);
+}
+
+/**
+ * ep_count_bytes_remain - get how many bytes in udc endpoint
+ * @ep: udc endpoint
+ *
+ * Returns number of bytes in OUT fifos. Broken for IN fifos (-EOPNOTSUPP)
+ */
+static int ep_count_bytes_remain(struct pxa_ep *ep)
+{
+	if (ep->dir_in)
+		return -EOPNOTSUPP;
+	return udc_ep_readl(ep, UDCBCR) & 0x3ff;
+}
+
+/**
+ * ep_is_empty - checks if ep has byte ready for reading
+ * @ep: udc endpoint
+ *
+ * If endpoint is the control endpoint, checks if there are bytes in the
+ * control endpoint fifo. If endpoint is a data endpoint, checks if bytes
+ * are ready for reading on OUT endpoint.
+ *
+ * Returns 0 if ep not empty, 1 if ep empty, -EOPNOTSUPP if IN endpoint
+ */
+static int ep_is_empty(struct pxa_ep *ep)
+{
+	int ret;
+
+	if (!is_ep0(ep) && ep->dir_in)
+		return -EOPNOTSUPP;
+	if (is_ep0(ep))
+		ret = !(udc_ep_readl(ep, UDCCSR) & UDCCSR0_RNE);
+	else
+		ret = !(udc_ep_readl(ep, UDCCSR) & UDCCSR_BNE);
+	return ret;
+}
+
+/**
+ * ep_is_full - checks if ep has place to write bytes
+ * @ep: udc endpoint
+ *
+ * If endpoint is not the control endpoint and is an IN endpoint, checks if
+ * there is place to write bytes into the endpoint.
+ *
+ * Returns 0 if ep not full, 1 if ep full, -EOPNOTSUPP if OUT endpoint
+ */
+static int ep_is_full(struct pxa_ep *ep)
+{
+	if (is_ep0(ep))
+		return (udc_ep_readl(ep, UDCCSR) & UDCCSR0_IPR);
+	if (!ep->dir_in)
+		return -EOPNOTSUPP;
+	return (!(udc_ep_readl(ep, UDCCSR) & UDCCSR_BNF));
+}
+
+/**
+ * epout_has_pkt - checks if OUT endpoint fifo has a packet available
+ * @ep: pxa endpoint
+ *
+ * Returns 1 if a complete packet is available, 0 if not, -EOPNOTSUPP for IN ep.
+ */
+static int epout_has_pkt(struct pxa_ep *ep)
+{
+	if (!is_ep0(ep) && ep->dir_in)
+		return -EOPNOTSUPP;
+	if (is_ep0(ep))
+		return (udc_ep_readl(ep, UDCCSR) & UDCCSR0_OPC);
+	return (udc_ep_readl(ep, UDCCSR) & UDCCSR_PC);
+}
+
+/**
+ * set_ep0state - Set ep0 automata state
+ * @udc: udc device
+ * @state: state
+ */
+static void set_ep0state(struct pxa_udc *udc, int state)
+{
+	struct pxa_ep *ep = &udc->pxa_ep[0];
+	char *old_stname = EP0_STNAME(udc);
+
+	udc->ep0state = state;
+	ep_dbg(ep, "state=%s->%s, udccsr0=0x%03x, udcbcr=%d\n", old_stname,
+		EP0_STNAME(udc), udc_ep_readl(ep, UDCCSR),
+		udc_ep_readl(ep, UDCBCR));
+}
+
+/**
+ * ep0_idle - Put control endpoint into idle state
+ * @dev: udc device
+ */
+static void ep0_idle(struct pxa_udc *dev)
+{
+	set_ep0state(dev, WAIT_FOR_SETUP);
+}
+
+/**
+ * inc_ep_stats_reqs - Update ep stats counts
+ * @ep: physical endpoint
+ * @is_in: ep direction (USB_DIR_IN or 0)
+ *
+ */
+static void inc_ep_stats_reqs(struct pxa_ep *ep, int is_in)
+{
+	if (is_in)
+		ep->stats.in_ops++;
+	else
+		ep->stats.out_ops++;
+}
+
+/**
+ * inc_ep_stats_bytes - Update ep stats counts
+ * @ep: physical endpoint
+ * @count: bytes transferred on endpoint
+ * @is_in: ep direction (USB_DIR_IN or 0)
+ */
+static void inc_ep_stats_bytes(struct pxa_ep *ep, int count, int is_in)
+{
+	if (is_in)
+		ep->stats.in_bytes += count;
+	else
+		ep->stats.out_bytes += count;
+}
+
+/**
+ * pxa_ep_setup - Sets up an usb physical endpoint
+ * @ep: pxa27x physical endpoint
+ *
+ * Find the physical pxa27x ep, and setup its UDCCR
+ */
+static void pxa_ep_setup(struct pxa_ep *ep)
+{
+	u32 new_udccr;
+
+	new_udccr = ((ep->config << UDCCONR_CN_S) & UDCCONR_CN)
+		| ((ep->interface << UDCCONR_IN_S) & UDCCONR_IN)
+		| ((ep->alternate << UDCCONR_AISN_S) & UDCCONR_AISN)
+		| ((EPADDR(ep) << UDCCONR_EN_S) & UDCCONR_EN)
+		| ((EPXFERTYPE(ep) << UDCCONR_ET_S) & UDCCONR_ET)
+		| ((ep->dir_in) ? UDCCONR_ED : 0)
+		| ((ep->fifo_size << UDCCONR_MPS_S) & UDCCONR_MPS)
+		| UDCCONR_EE;
+
+	udc_ep_writel(ep, UDCCR, new_udccr);
+}
+
+/**
+ * pxa_eps_setup - Sets up all usb physical endpoints
+ * @dev: udc device
+ *
+ * Setup all pxa physical endpoints, except ep0
+ */
+static void pxa_eps_setup(struct pxa_udc *dev)
+{
+	unsigned int i;
+
+	dev_dbg(dev->dev, "%s: dev=%p\n", __func__, dev);
+
+	for (i = 1; i < NR_PXA_ENDPOINTS; i++)
+		pxa_ep_setup(&dev->pxa_ep[i]);
+}
+
+/**
+ * pxa_ep_alloc_request - Allocate usb request
+ * @_ep: usb endpoint
+ * @gfp_flags:
+ *
+ * For the pxa27x, these can just wrap kmalloc/kfree.  gadget drivers
+ * must still pass correctly initialized endpoints, since other controller
+ * drivers may care about how it's currently set up (dma issues etc).
+  */
+static struct usb_request *
+pxa_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct pxa27x_request *req;
+
+	req = kzalloc(sizeof *req, gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+	req->in_use = 0;
+	req->udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+
+	return &req->req;
+}
+
+/**
+ * pxa_ep_free_request - Free usb request
+ * @_ep: usb endpoint
+ * @_req: usb request
+ *
+ * Wrapper around kfree to free _req
+ */
+static void pxa_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct pxa27x_request *req;
+
+	req = container_of(_req, struct pxa27x_request, req);
+	WARN_ON(!list_empty(&req->queue));
+	kfree(req);
+}
+
+/**
+ * ep_add_request - add a request to the endpoint's queue
+ * @ep: usb endpoint
+ * @req: usb request
+ *
+ * Context: ep->lock held
+ *
+ * Queues the request in the endpoint's queue, and enables the interrupts
+ * on the endpoint.
+ */
+static void ep_add_request(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+	if (unlikely(!req))
+		return;
+	ep_vdbg(ep, "req:%p, lg=%d, udccsr=0x%03x\n", req,
+		req->req.length, udc_ep_readl(ep, UDCCSR));
+
+	req->in_use = 1;
+	list_add_tail(&req->queue, &ep->queue);
+	pio_irq_enable(ep);
+}
+
+/**
+ * ep_del_request - removes a request from the endpoint's queue
+ * @ep: usb endpoint
+ * @req: usb request
+ *
+ * Context: ep->lock held
+ *
+ * Unqueue the request from the endpoint's queue. If there are no more requests
+ * on the endpoint, and if it's not the control endpoint, interrupts are
+ * disabled on the endpoint.
+ */
+static void ep_del_request(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+	if (unlikely(!req))
+		return;
+	ep_vdbg(ep, "req:%p, lg=%d, udccsr=0x%03x\n", req,
+		req->req.length, udc_ep_readl(ep, UDCCSR));
+
+	list_del_init(&req->queue);
+	req->in_use = 0;
+	if (!is_ep0(ep) && list_empty(&ep->queue))
+		pio_irq_disable(ep);
+}
+
+/**
+ * req_done - Complete an usb request
+ * @ep: pxa physical endpoint
+ * @req: pxa request
+ * @status: usb request status sent to gadget API
+ * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held
+ *
+ * Context: ep->lock held if flags not NULL, else ep->lock released
+ *
+ * Retire a pxa27x usb request. Endpoint must be locked.
+ */
+static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status,
+	unsigned long *pflags)
+{
+	unsigned long	flags;
+
+	ep_del_request(ep, req);
+	if (likely(req->req.status == -EINPROGRESS))
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	if (status && status != -ESHUTDOWN)
+		ep_dbg(ep, "complete req %p stat %d len %u/%u\n",
+			&req->req, status,
+			req->req.actual, req->req.length);
+
+	if (pflags)
+		spin_unlock_irqrestore(&ep->lock, *pflags);
+	local_irq_save(flags);
+	usb_gadget_giveback_request(&req->udc_usb_ep->usb_ep, &req->req);
+	local_irq_restore(flags);
+	if (pflags)
+		spin_lock_irqsave(&ep->lock, *pflags);
+}
+
+/**
+ * ep_end_out_req - Ends endpoint OUT request
+ * @ep: physical endpoint
+ * @req: pxa request
+ * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held
+ *
+ * Context: ep->lock held or released (see req_done())
+ *
+ * Ends endpoint OUT request (completes usb request).
+ */
+static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req,
+	unsigned long *pflags)
+{
+	inc_ep_stats_reqs(ep, !USB_DIR_IN);
+	req_done(ep, req, 0, pflags);
+}
+
+/**
+ * ep0_end_out_req - Ends control endpoint OUT request (ends data stage)
+ * @ep: physical endpoint
+ * @req: pxa request
+ * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held
+ *
+ * Context: ep->lock held or released (see req_done())
+ *
+ * Ends control endpoint OUT request (completes usb request), and puts
+ * control endpoint into idle state
+ */
+static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req,
+	unsigned long *pflags)
+{
+	set_ep0state(ep->dev, OUT_STATUS_STAGE);
+	ep_end_out_req(ep, req, pflags);
+	ep0_idle(ep->dev);
+}
+
+/**
+ * ep_end_in_req - Ends endpoint IN request
+ * @ep: physical endpoint
+ * @req: pxa request
+ * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held
+ *
+ * Context: ep->lock held or released (see req_done())
+ *
+ * Ends endpoint IN request (completes usb request).
+ */
+static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req,
+	unsigned long *pflags)
+{
+	inc_ep_stats_reqs(ep, USB_DIR_IN);
+	req_done(ep, req, 0, pflags);
+}
+
+/**
+ * ep0_end_in_req - Ends control endpoint IN request (ends data stage)
+ * @ep: physical endpoint
+ * @req: pxa request
+ * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held
+ *
+ * Context: ep->lock held or released (see req_done())
+ *
+ * Ends control endpoint IN request (completes usb request), and puts
+ * control endpoint into status state
+ */
+static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req,
+	unsigned long *pflags)
+{
+	set_ep0state(ep->dev, IN_STATUS_STAGE);
+	ep_end_in_req(ep, req, pflags);
+}
+
+/**
+ * nuke - Dequeue all requests
+ * @ep: pxa endpoint
+ * @status: usb request status
+ *
+ * Context: ep->lock released
+ *
+ * Dequeues all requests on an endpoint. As a side effect, interrupts will be
+ * disabled on that endpoint (because no more requests).
+ */
+static void nuke(struct pxa_ep *ep, int status)
+{
+	struct pxa27x_request	*req;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct pxa27x_request, queue);
+		req_done(ep, req, status, &flags);
+	}
+	spin_unlock_irqrestore(&ep->lock, flags);
+}
+
+/**
+ * read_packet - transfer 1 packet from an OUT endpoint into request
+ * @ep: pxa physical endpoint
+ * @req: usb request
+ *
+ * Takes bytes from OUT endpoint and transfers them info the usb request.
+ * If there is less space in request than bytes received in OUT endpoint,
+ * bytes are left in the OUT endpoint.
+ *
+ * Returns how many bytes were actually transferred
+ */
+static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+	u32 *buf;
+	int bytes_ep, bufferspace, count, i;
+
+	bytes_ep = ep_count_bytes_remain(ep);
+	bufferspace = req->req.length - req->req.actual;
+
+	buf = (u32 *)(req->req.buf + req->req.actual);
+	prefetchw(buf);
+
+	if (likely(!ep_is_empty(ep)))
+		count = min(bytes_ep, bufferspace);
+	else /* zlp */
+		count = 0;
+
+	for (i = count; i > 0; i -= 4)
+		*buf++ = udc_ep_readl(ep, UDCDR);
+	req->req.actual += count;
+
+	ep_write_UDCCSR(ep, UDCCSR_PC);
+
+	return count;
+}
+
+/**
+ * write_packet - transfer 1 packet from request into an IN endpoint
+ * @ep: pxa physical endpoint
+ * @req: usb request
+ * @max: max bytes that fit into endpoint
+ *
+ * Takes bytes from usb request, and transfers them into the physical
+ * endpoint. If there are no bytes to transfer, doesn't write anything
+ * to physical endpoint.
+ *
+ * Returns how many bytes were actually transferred.
+ */
+static int write_packet(struct pxa_ep *ep, struct pxa27x_request *req,
+			unsigned int max)
+{
+	int length, count, remain, i;
+	u32 *buf;
+	u8 *buf_8;
+
+	buf = (u32 *)(req->req.buf + req->req.actual);
+	prefetch(buf);
+
+	length = min(req->req.length - req->req.actual, max);
+	req->req.actual += length;
+
+	remain = length & 0x3;
+	count = length & ~(0x3);
+	for (i = count; i > 0 ; i -= 4)
+		udc_ep_writel(ep, UDCDR, *buf++);
+
+	buf_8 = (u8 *)buf;
+	for (i = remain; i > 0; i--)
+		udc_ep_writeb(ep, UDCDR, *buf_8++);
+
+	ep_vdbg(ep, "length=%d+%d, udccsr=0x%03x\n", count, remain,
+		udc_ep_readl(ep, UDCCSR));
+
+	return length;
+}
+
+/**
+ * read_fifo - Transfer packets from OUT endpoint into usb request
+ * @ep: pxa physical endpoint
+ * @req: usb request
+ *
+ * Context: interrupt handler
+ *
+ * Unload as many packets as possible from the fifo we use for usb OUT
+ * transfers and put them into the request. Caller should have made sure
+ * there's at least one packet ready.
+ * Doesn't complete the request, that's the caller's job
+ *
+ * Returns 1 if the request completed, 0 otherwise
+ */
+static int read_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+	int count, is_short, completed = 0;
+
+	while (epout_has_pkt(ep)) {
+		count = read_packet(ep, req);
+		inc_ep_stats_bytes(ep, count, !USB_DIR_IN);
+
+		is_short = (count < ep->fifo_size);
+		ep_dbg(ep, "read udccsr:%03x, count:%d bytes%s req %p %d/%d\n",
+			udc_ep_readl(ep, UDCCSR), count, is_short ? "/S" : "",
+			&req->req, req->req.actual, req->req.length);
+
+		/* completion */
+		if (is_short || req->req.actual == req->req.length) {
+			completed = 1;
+			break;
+		}
+		/* finished that packet.  the next one may be waiting... */
+	}
+	return completed;
+}
+
+/**
+ * write_fifo - transfer packets from usb request into an IN endpoint
+ * @ep: pxa physical endpoint
+ * @req: pxa usb request
+ *
+ * Write to an IN endpoint fifo, as many packets as possible.
+ * irqs will use this to write the rest later.
+ * caller guarantees at least one packet buffer is ready (or a zlp).
+ * Doesn't complete the request, that's the caller's job
+ *
+ * Returns 1 if request fully transferred, 0 if partial transfer
+ */
+static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+	unsigned max;
+	int count, is_short, is_last = 0, completed = 0, totcount = 0;
+	u32 udccsr;
+
+	max = ep->fifo_size;
+	do {
+		udccsr = udc_ep_readl(ep, UDCCSR);
+		if (udccsr & UDCCSR_PC) {
+			ep_vdbg(ep, "Clearing Transmit Complete, udccsr=%x\n",
+				udccsr);
+			ep_write_UDCCSR(ep, UDCCSR_PC);
+		}
+		if (udccsr & UDCCSR_TRN) {
+			ep_vdbg(ep, "Clearing Underrun on, udccsr=%x\n",
+				udccsr);
+			ep_write_UDCCSR(ep, UDCCSR_TRN);
+		}
+
+		count = write_packet(ep, req, max);
+		inc_ep_stats_bytes(ep, count, USB_DIR_IN);
+		totcount += count;
+
+		/* last packet is usually short (or a zlp) */
+		if (unlikely(count < max)) {
+			is_last = 1;
+			is_short = 1;
+		} else {
+			if (likely(req->req.length > req->req.actual)
+					|| req->req.zero)
+				is_last = 0;
+			else
+				is_last = 1;
+			/* interrupt/iso maxpacket may not fill the fifo */
+			is_short = unlikely(max < ep->fifo_size);
+		}
+
+		if (is_short)
+			ep_write_UDCCSR(ep, UDCCSR_SP);
+
+		/* requests complete when all IN data is in the FIFO */
+		if (is_last) {
+			completed = 1;
+			break;
+		}
+	} while (!ep_is_full(ep));
+
+	ep_dbg(ep, "wrote count:%d bytes%s%s, left:%d req=%p\n",
+			totcount, is_last ? "/L" : "", is_short ? "/S" : "",
+			req->req.length - req->req.actual, &req->req);
+
+	return completed;
+}
+
+/**
+ * read_ep0_fifo - Transfer packets from control endpoint into usb request
+ * @ep: control endpoint
+ * @req: pxa usb request
+ *
+ * Special ep0 version of the above read_fifo. Reads as many bytes from control
+ * endpoint as can be read, and stores them into usb request (limited by request
+ * maximum length).
+ *
+ * Returns 0 if usb request only partially filled, 1 if fully filled
+ */
+static int read_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+	int count, is_short, completed = 0;
+
+	while (epout_has_pkt(ep)) {
+		count = read_packet(ep, req);
+		ep_write_UDCCSR(ep, UDCCSR0_OPC);
+		inc_ep_stats_bytes(ep, count, !USB_DIR_IN);
+
+		is_short = (count < ep->fifo_size);
+		ep_dbg(ep, "read udccsr:%03x, count:%d bytes%s req %p %d/%d\n",
+			udc_ep_readl(ep, UDCCSR), count, is_short ? "/S" : "",
+			&req->req, req->req.actual, req->req.length);
+
+		if (is_short || req->req.actual >= req->req.length) {
+			completed = 1;
+			break;
+		}
+	}
+
+	return completed;
+}
+
+/**
+ * write_ep0_fifo - Send a request to control endpoint (ep0 in)
+ * @ep: control endpoint
+ * @req: request
+ *
+ * Context: interrupt handler
+ *
+ * Sends a request (or a part of the request) to the control endpoint (ep0 in).
+ * If the request doesn't fit, the remaining part will be sent from irq.
+ * The request is considered fully written only if either :
+ *   - last write transferred all remaining bytes, but fifo was not fully filled
+ *   - last write was a 0 length write
+ *
+ * Returns 1 if request fully written, 0 if request only partially sent
+ */
+static int write_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+	unsigned	count;
+	int		is_last, is_short;
+
+	count = write_packet(ep, req, EP0_FIFO_SIZE);
+	inc_ep_stats_bytes(ep, count, USB_DIR_IN);
+
+	is_short = (count < EP0_FIFO_SIZE);
+	is_last = ((count == 0) || (count < EP0_FIFO_SIZE));
+
+	/* Sends either a short packet or a 0 length packet */
+	if (unlikely(is_short))
+		ep_write_UDCCSR(ep, UDCCSR0_IPR);
+
+	ep_dbg(ep, "in %d bytes%s%s, %d left, req=%p, udccsr0=0x%03x\n",
+		count, is_short ? "/S" : "", is_last ? "/L" : "",
+		req->req.length - req->req.actual,
+		&req->req, udc_ep_readl(ep, UDCCSR));
+
+	return is_last;
+}
+
+/**
+ * pxa_ep_queue - Queue a request into an IN endpoint
+ * @_ep: usb endpoint
+ * @_req: usb request
+ * @gfp_flags: flags
+ *
+ * Context: thread context or from the interrupt handler in the
+ * special case of ep0 setup :
+ *   (irq->handle_ep0_ctrl_req->gadget_setup->pxa_ep_queue)
+ *
+ * Returns 0 if succedeed, error otherwise
+ */
+static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+			gfp_t gfp_flags)
+{
+	struct udc_usb_ep	*udc_usb_ep;
+	struct pxa_ep		*ep;
+	struct pxa27x_request	*req;
+	struct pxa_udc		*dev;
+	unsigned long		flags;
+	int			rc = 0;
+	int			is_first_req;
+	unsigned		length;
+	int			recursion_detected;
+
+	req = container_of(_req, struct pxa27x_request, req);
+	udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+
+	if (unlikely(!_req || !_req->complete || !_req->buf))
+		return -EINVAL;
+
+	if (unlikely(!_ep))
+		return -EINVAL;
+
+	ep = udc_usb_ep->pxa_ep;
+	if (unlikely(!ep))
+		return -EINVAL;
+
+	dev = ep->dev;
+	if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
+		ep_dbg(ep, "bogus device state\n");
+		return -ESHUTDOWN;
+	}
+
+	/* iso is always one packet per request, that's the only way
+	 * we can report per-packet status.  that also helps with dma.
+	 */
+	if (unlikely(EPXFERTYPE_is_ISO(ep)
+			&& req->req.length > ep->fifo_size))
+		return -EMSGSIZE;
+
+	spin_lock_irqsave(&ep->lock, flags);
+	recursion_detected = ep->in_handle_ep;
+
+	is_first_req = list_empty(&ep->queue);
+	ep_dbg(ep, "queue req %p(first=%s), len %d buf %p\n",
+			_req, is_first_req ? "yes" : "no",
+			_req->length, _req->buf);
+
+	if (!ep->enabled) {
+		_req->status = -ESHUTDOWN;
+		rc = -ESHUTDOWN;
+		goto out_locked;
+	}
+
+	if (req->in_use) {
+		ep_err(ep, "refusing to queue req %p (already queued)\n", req);
+		goto out_locked;
+	}
+
+	length = _req->length;
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	ep_add_request(ep, req);
+	spin_unlock_irqrestore(&ep->lock, flags);
+
+	if (is_ep0(ep)) {
+		switch (dev->ep0state) {
+		case WAIT_ACK_SET_CONF_INTERF:
+			if (length == 0) {
+				ep_end_in_req(ep, req, NULL);
+			} else {
+				ep_err(ep, "got a request of %d bytes while"
+					"in state WAIT_ACK_SET_CONF_INTERF\n",
+					length);
+				ep_del_request(ep, req);
+				rc = -EL2HLT;
+			}
+			ep0_idle(ep->dev);
+			break;
+		case IN_DATA_STAGE:
+			if (!ep_is_full(ep))
+				if (write_ep0_fifo(ep, req))
+					ep0_end_in_req(ep, req, NULL);
+			break;
+		case OUT_DATA_STAGE:
+			if ((length == 0) || !epout_has_pkt(ep))
+				if (read_ep0_fifo(ep, req))
+					ep0_end_out_req(ep, req, NULL);
+			break;
+		default:
+			ep_err(ep, "odd state %s to send me a request\n",
+				EP0_STNAME(ep->dev));
+			ep_del_request(ep, req);
+			rc = -EL2HLT;
+			break;
+		}
+	} else {
+		if (!recursion_detected)
+			handle_ep(ep);
+	}
+
+out:
+	return rc;
+out_locked:
+	spin_unlock_irqrestore(&ep->lock, flags);
+	goto out;
+}
+
+/**
+ * pxa_ep_dequeue - Dequeue one request
+ * @_ep: usb endpoint
+ * @_req: usb request
+ *
+ * Return 0 if no error, -EINVAL or -ECONNRESET otherwise
+ */
+static int pxa_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct pxa_ep		*ep;
+	struct udc_usb_ep	*udc_usb_ep;
+	struct pxa27x_request	*req = NULL, *iter;
+	unsigned long		flags;
+	int			rc = -EINVAL;
+
+	if (!_ep)
+		return rc;
+	udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+	ep = udc_usb_ep->pxa_ep;
+	if (!ep || is_ep0(ep))
+		return rc;
+
+	spin_lock_irqsave(&ep->lock, flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		req = iter;
+		rc = 0;
+		break;
+	}
+
+	spin_unlock_irqrestore(&ep->lock, flags);
+	if (!rc)
+		req_done(ep, req, -ECONNRESET, NULL);
+	return rc;
+}
+
+/**
+ * pxa_ep_set_halt - Halts operations on one endpoint
+ * @_ep: usb endpoint
+ * @value:
+ *
+ * Returns 0 if no error, -EINVAL, -EROFS, -EAGAIN otherwise
+ */
+static int pxa_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	struct pxa_ep		*ep;
+	struct udc_usb_ep	*udc_usb_ep;
+	unsigned long flags;
+	int rc;
+
+
+	if (!_ep)
+		return -EINVAL;
+	udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+	ep = udc_usb_ep->pxa_ep;
+	if (!ep || is_ep0(ep))
+		return -EINVAL;
+
+	if (value == 0) {
+		/*
+		 * This path (reset toggle+halt) is needed to implement
+		 * SET_INTERFACE on normal hardware.  but it can't be
+		 * done from software on the PXA UDC, and the hardware
+		 * forgets to do it as part of SET_INTERFACE automagic.
+		 */
+		ep_dbg(ep, "only host can clear halt\n");
+		return -EROFS;
+	}
+
+	spin_lock_irqsave(&ep->lock, flags);
+
+	rc = -EAGAIN;
+	if (ep->dir_in	&& (ep_is_full(ep) || !list_empty(&ep->queue)))
+		goto out;
+
+	/* FST, FEF bits are the same for control and non control endpoints */
+	rc = 0;
+	ep_write_UDCCSR(ep, UDCCSR_FST | UDCCSR_FEF);
+	if (is_ep0(ep))
+		set_ep0state(ep->dev, STALL);
+
+out:
+	spin_unlock_irqrestore(&ep->lock, flags);
+	return rc;
+}
+
+/**
+ * pxa_ep_fifo_status - Get how many bytes in physical endpoint
+ * @_ep: usb endpoint
+ *
+ * Returns number of bytes in OUT fifos. Broken for IN fifos.
+ */
+static int pxa_ep_fifo_status(struct usb_ep *_ep)
+{
+	struct pxa_ep		*ep;
+	struct udc_usb_ep	*udc_usb_ep;
+
+	if (!_ep)
+		return -ENODEV;
+	udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+	ep = udc_usb_ep->pxa_ep;
+	if (!ep || is_ep0(ep))
+		return -ENODEV;
+
+	if (ep->dir_in)
+		return -EOPNOTSUPP;
+	if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN || ep_is_empty(ep))
+		return 0;
+	else
+		return ep_count_bytes_remain(ep) + 1;
+}
+
+/**
+ * pxa_ep_fifo_flush - Flushes one endpoint
+ * @_ep: usb endpoint
+ *
+ * Discards all data in one endpoint(IN or OUT), except control endpoint.
+ */
+static void pxa_ep_fifo_flush(struct usb_ep *_ep)
+{
+	struct pxa_ep		*ep;
+	struct udc_usb_ep	*udc_usb_ep;
+	unsigned long		flags;
+
+	if (!_ep)
+		return;
+	udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+	ep = udc_usb_ep->pxa_ep;
+	if (!ep || is_ep0(ep))
+		return;
+
+	spin_lock_irqsave(&ep->lock, flags);
+
+	if (unlikely(!list_empty(&ep->queue)))
+		ep_dbg(ep, "called while queue list not empty\n");
+	ep_dbg(ep, "called\n");
+
+	/* for OUT, just read and discard the FIFO contents. */
+	if (!ep->dir_in) {
+		while (!ep_is_empty(ep))
+			udc_ep_readl(ep, UDCDR);
+	} else {
+		/* most IN status is the same, but ISO can't stall */
+		ep_write_UDCCSR(ep,
+				UDCCSR_PC | UDCCSR_FEF | UDCCSR_TRN
+				| (EPXFERTYPE_is_ISO(ep) ? 0 : UDCCSR_SST));
+	}
+
+	spin_unlock_irqrestore(&ep->lock, flags);
+}
+
+/**
+ * pxa_ep_enable - Enables usb endpoint
+ * @_ep: usb endpoint
+ * @desc: usb endpoint descriptor
+ *
+ * Nothing much to do here, as ep configuration is done once and for all
+ * before udc is enabled. After udc enable, no physical endpoint configuration
+ * can be changed.
+ * Function makes sanity checks and flushes the endpoint.
+ */
+static int pxa_ep_enable(struct usb_ep *_ep,
+	const struct usb_endpoint_descriptor *desc)
+{
+	struct pxa_ep		*ep;
+	struct udc_usb_ep	*udc_usb_ep;
+	struct pxa_udc		*udc;
+
+	if (!_ep || !desc)
+		return -EINVAL;
+
+	udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+	if (udc_usb_ep->pxa_ep) {
+		ep = udc_usb_ep->pxa_ep;
+		ep_warn(ep, "usb_ep %s already enabled, doing nothing\n",
+			_ep->name);
+	} else {
+		ep = find_pxa_ep(udc_usb_ep->dev, udc_usb_ep);
+	}
+
+	if (!ep || is_ep0(ep)) {
+		dev_err(udc_usb_ep->dev->dev,
+			"unable to match pxa_ep for ep %s\n",
+			_ep->name);
+		return -EINVAL;
+	}
+
+	if ((desc->bDescriptorType != USB_DT_ENDPOINT)
+			|| (ep->type != usb_endpoint_type(desc))) {
+		ep_err(ep, "type mismatch\n");
+		return -EINVAL;
+	}
+
+	if (ep->fifo_size < usb_endpoint_maxp(desc)) {
+		ep_err(ep, "bad maxpacket\n");
+		return -ERANGE;
+	}
+
+	udc_usb_ep->pxa_ep = ep;
+	udc = ep->dev;
+
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
+		ep_err(ep, "bogus device state\n");
+		return -ESHUTDOWN;
+	}
+
+	ep->enabled = 1;
+
+	/* flush fifo (mostly for OUT buffers) */
+	pxa_ep_fifo_flush(_ep);
+
+	ep_dbg(ep, "enabled\n");
+	return 0;
+}
+
+/**
+ * pxa_ep_disable - Disable usb endpoint
+ * @_ep: usb endpoint
+ *
+ * Same as for pxa_ep_enable, no physical endpoint configuration can be
+ * changed.
+ * Function flushes the endpoint and related requests.
+ */
+static int pxa_ep_disable(struct usb_ep *_ep)
+{
+	struct pxa_ep		*ep;
+	struct udc_usb_ep	*udc_usb_ep;
+
+	if (!_ep)
+		return -EINVAL;
+
+	udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+	ep = udc_usb_ep->pxa_ep;
+	if (!ep || is_ep0(ep) || !list_empty(&ep->queue))
+		return -EINVAL;
+
+	ep->enabled = 0;
+	nuke(ep, -ESHUTDOWN);
+
+	pxa_ep_fifo_flush(_ep);
+	udc_usb_ep->pxa_ep = NULL;
+
+	ep_dbg(ep, "disabled\n");
+	return 0;
+}
+
+static const struct usb_ep_ops pxa_ep_ops = {
+	.enable		= pxa_ep_enable,
+	.disable	= pxa_ep_disable,
+
+	.alloc_request	= pxa_ep_alloc_request,
+	.free_request	= pxa_ep_free_request,
+
+	.queue		= pxa_ep_queue,
+	.dequeue	= pxa_ep_dequeue,
+
+	.set_halt	= pxa_ep_set_halt,
+	.fifo_status	= pxa_ep_fifo_status,
+	.fifo_flush	= pxa_ep_fifo_flush,
+};
+
+/**
+ * dplus_pullup - Connect or disconnect pullup resistor to D+ pin
+ * @udc: udc device
+ * @on: 0 if disconnect pullup resistor, 1 otherwise
+ * Context: any
+ *
+ * Handle D+ pullup resistor, make the device visible to the usb bus, and
+ * declare it as a full speed usb device
+ */
+static void dplus_pullup(struct pxa_udc *udc, int on)
+{
+	if (udc->gpiod) {
+		gpiod_set_value(udc->gpiod, on);
+	} else if (udc->udc_command) {
+		if (on)
+			udc->udc_command(PXA2XX_UDC_CMD_CONNECT);
+		else
+			udc->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
+	}
+	udc->pullup_on = on;
+}
+
+/**
+ * pxa_udc_get_frame - Returns usb frame number
+ * @_gadget: usb gadget
+ */
+static int pxa_udc_get_frame(struct usb_gadget *_gadget)
+{
+	struct pxa_udc *udc = to_gadget_udc(_gadget);
+
+	return (udc_readl(udc, UDCFNR) & 0x7ff);
+}
+
+/**
+ * pxa_udc_wakeup - Force udc device out of suspend
+ * @_gadget: usb gadget
+ *
+ * Returns 0 if successful, error code otherwise
+ */
+static int pxa_udc_wakeup(struct usb_gadget *_gadget)
+{
+	struct pxa_udc *udc = to_gadget_udc(_gadget);
+
+	/* host may not have enabled remote wakeup */
+	if ((udc_readl(udc, UDCCR) & UDCCR_DWRE) == 0)
+		return -EHOSTUNREACH;
+	udc_set_mask_UDCCR(udc, UDCCR_UDR);
+	return 0;
+}
+
+static void udc_enable(struct pxa_udc *udc);
+static void udc_disable(struct pxa_udc *udc);
+
+/**
+ * should_enable_udc - Tells if UDC should be enabled
+ * @udc: udc device
+ * Context: any
+ *
+ * The UDC should be enabled if :
+ *  - the pullup resistor is connected
+ *  - and a gadget driver is bound
+ *  - and vbus is sensed (or no vbus sense is available)
+ *
+ * Returns 1 if UDC should be enabled, 0 otherwise
+ */
+static int should_enable_udc(struct pxa_udc *udc)
+{
+	int put_on;
+
+	put_on = ((udc->pullup_on) && (udc->driver));
+	put_on &= ((udc->vbus_sensed) || (IS_ERR_OR_NULL(udc->transceiver)));
+	return put_on;
+}
+
+/**
+ * should_disable_udc - Tells if UDC should be disabled
+ * @udc: udc device
+ * Context: any
+ *
+ * The UDC should be disabled if :
+ *  - the pullup resistor is not connected
+ *  - or no gadget driver is bound
+ *  - or no vbus is sensed (when vbus sesing is available)
+ *
+ * Returns 1 if UDC should be disabled
+ */
+static int should_disable_udc(struct pxa_udc *udc)
+{
+	int put_off;
+
+	put_off = ((!udc->pullup_on) || (!udc->driver));
+	put_off |= ((!udc->vbus_sensed) && (!IS_ERR_OR_NULL(udc->transceiver)));
+	return put_off;
+}
+
+/**
+ * pxa_udc_pullup - Offer manual D+ pullup control
+ * @_gadget: usb gadget using the control
+ * @is_active: 0 if disconnect, else connect D+ pullup resistor
+ *
+ * Context: task context, might sleep
+ *
+ * Returns 0 if OK, -EOPNOTSUPP if udc driver doesn't handle D+ pullup
+ */
+static int pxa_udc_pullup(struct usb_gadget *_gadget, int is_active)
+{
+	struct pxa_udc *udc = to_gadget_udc(_gadget);
+
+	if (!udc->gpiod && !udc->udc_command)
+		return -EOPNOTSUPP;
+
+	dplus_pullup(udc, is_active);
+
+	if (should_enable_udc(udc))
+		udc_enable(udc);
+	if (should_disable_udc(udc))
+		udc_disable(udc);
+	return 0;
+}
+
+/**
+ * pxa_udc_vbus_session - Called by external transceiver to enable/disable udc
+ * @_gadget: usb gadget
+ * @is_active: 0 if should disable the udc, 1 if should enable
+ *
+ * Enables the udc, and optionnaly activates D+ pullup resistor. Or disables the
+ * udc, and deactivates D+ pullup resistor.
+ *
+ * Returns 0
+ */
+static int pxa_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
+{
+	struct pxa_udc *udc = to_gadget_udc(_gadget);
+
+	udc->vbus_sensed = is_active;
+	if (should_enable_udc(udc))
+		udc_enable(udc);
+	if (should_disable_udc(udc))
+		udc_disable(udc);
+
+	return 0;
+}
+
+/**
+ * pxa_udc_vbus_draw - Called by gadget driver after SET_CONFIGURATION completed
+ * @_gadget: usb gadget
+ * @mA: current drawn
+ *
+ * Context: task context, might sleep
+ *
+ * Called after a configuration was chosen by a USB host, to inform how much
+ * current can be drawn by the device from VBus line.
+ *
+ * Returns 0 or -EOPNOTSUPP if no transceiver is handling the udc
+ */
+static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
+{
+	struct pxa_udc *udc;
+
+	udc = to_gadget_udc(_gadget);
+	if (!IS_ERR_OR_NULL(udc->transceiver))
+		return usb_phy_set_power(udc->transceiver, mA);
+	return -EOPNOTSUPP;
+}
+
+/**
+ * pxa_udc_phy_event - Called by phy upon VBus event
+ * @nb: notifier block
+ * @action: phy action, is vbus connect or disconnect
+ * @data: the usb_gadget structure in pxa_udc
+ *
+ * Called by the USB Phy when a cable connect or disconnect is sensed.
+ *
+ * Returns 0
+ */
+static int pxa_udc_phy_event(struct notifier_block *nb, unsigned long action,
+			     void *data)
+{
+	struct usb_gadget *gadget = data;
+
+	switch (action) {
+	case USB_EVENT_VBUS:
+		usb_gadget_vbus_connect(gadget);
+		return NOTIFY_OK;
+	case USB_EVENT_NONE:
+		usb_gadget_vbus_disconnect(gadget);
+		return NOTIFY_OK;
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
+static struct notifier_block pxa27x_udc_phy = {
+	.notifier_call = pxa_udc_phy_event,
+};
+
+static int pxa27x_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+static int pxa27x_udc_stop(struct usb_gadget *g);
+
+static const struct usb_gadget_ops pxa_udc_ops = {
+	.get_frame	= pxa_udc_get_frame,
+	.wakeup		= pxa_udc_wakeup,
+	.pullup		= pxa_udc_pullup,
+	.vbus_session	= pxa_udc_vbus_session,
+	.vbus_draw	= pxa_udc_vbus_draw,
+	.udc_start	= pxa27x_udc_start,
+	.udc_stop	= pxa27x_udc_stop,
+};
+
+/**
+ * udc_disable - disable udc device controller
+ * @udc: udc device
+ * Context: any
+ *
+ * Disables the udc device : disables clocks, udc interrupts, control endpoint
+ * interrupts.
+ */
+static void udc_disable(struct pxa_udc *udc)
+{
+	if (!udc->enabled)
+		return;
+
+	udc_writel(udc, UDCICR0, 0);
+	udc_writel(udc, UDCICR1, 0);
+
+	udc_clear_mask_UDCCR(udc, UDCCR_UDE);
+
+	ep0_idle(udc);
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	clk_disable(udc->clk);
+
+	udc->enabled = 0;
+}
+
+/**
+ * udc_init_data - Initialize udc device data structures
+ * @dev: udc device
+ *
+ * Initializes gadget endpoint list, endpoints locks. No action is taken
+ * on the hardware.
+ */
+static void udc_init_data(struct pxa_udc *dev)
+{
+	int i;
+	struct pxa_ep *ep;
+
+	/* device/ep0 records init */
+	INIT_LIST_HEAD(&dev->gadget.ep_list);
+	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+	dev->udc_usb_ep[0].pxa_ep = &dev->pxa_ep[0];
+	dev->gadget.quirk_altset_not_supp = 1;
+	ep0_idle(dev);
+
+	/* PXA endpoints init */
+	for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
+		ep = &dev->pxa_ep[i];
+
+		ep->enabled = is_ep0(ep);
+		INIT_LIST_HEAD(&ep->queue);
+		spin_lock_init(&ep->lock);
+	}
+
+	/* USB endpoints init */
+	for (i = 1; i < NR_USB_ENDPOINTS; i++) {
+		list_add_tail(&dev->udc_usb_ep[i].usb_ep.ep_list,
+				&dev->gadget.ep_list);
+		usb_ep_set_maxpacket_limit(&dev->udc_usb_ep[i].usb_ep,
+					   dev->udc_usb_ep[i].usb_ep.maxpacket);
+	}
+}
+
+/**
+ * udc_enable - Enables the udc device
+ * @udc: udc device
+ *
+ * Enables the udc device : enables clocks, udc interrupts, control endpoint
+ * interrupts, sets usb as UDC client and setups endpoints.
+ */
+static void udc_enable(struct pxa_udc *udc)
+{
+	if (udc->enabled)
+		return;
+
+	clk_enable(udc->clk);
+	udc_writel(udc, UDCICR0, 0);
+	udc_writel(udc, UDCICR1, 0);
+	udc_clear_mask_UDCCR(udc, UDCCR_UDE);
+
+	ep0_idle(udc);
+	udc->gadget.speed = USB_SPEED_FULL;
+	memset(&udc->stats, 0, sizeof(udc->stats));
+
+	pxa_eps_setup(udc);
+	udc_set_mask_UDCCR(udc, UDCCR_UDE);
+	ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_ACM);
+	udelay(2);
+	if (udc_readl(udc, UDCCR) & UDCCR_EMCE)
+		dev_err(udc->dev, "Configuration errors, udc disabled\n");
+
+	/*
+	 * Caller must be able to sleep in order to cope with startup transients
+	 */
+	msleep(100);
+
+	/* enable suspend/resume and reset irqs */
+	udc_writel(udc, UDCICR1,
+			UDCICR1_IECC | UDCICR1_IERU
+			| UDCICR1_IESU | UDCICR1_IERS);
+
+	/* enable ep0 irqs */
+	pio_irq_enable(&udc->pxa_ep[0]);
+
+	udc->enabled = 1;
+}
+
+/**
+ * pxa27x_udc_start - Register gadget driver
+ * @g: gadget
+ * @driver: gadget driver
+ *
+ * When a driver is successfully registered, it will receive control requests
+ * including set_configuration(), which enables non-control requests.  Then
+ * usb traffic follows until a disconnect is reported.  Then a host may connect
+ * again, or the driver might get unbound.
+ *
+ * Note that the udc is not automatically enabled. Check function
+ * should_enable_udc().
+ *
+ * Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise
+ */
+static int pxa27x_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct pxa_udc *udc = to_pxa(g);
+	int retval;
+
+	/* first hook up the driver ... */
+	udc->driver = driver;
+
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
+		retval = otg_set_peripheral(udc->transceiver->otg,
+						&udc->gadget);
+		if (retval) {
+			dev_err(udc->dev, "can't bind to transceiver\n");
+			goto fail;
+		}
+	}
+
+	if (should_enable_udc(udc))
+		udc_enable(udc);
+	return 0;
+
+fail:
+	udc->driver = NULL;
+	return retval;
+}
+
+/**
+ * stop_activity - Stops udc endpoints
+ * @udc: udc device
+ *
+ * Disables all udc endpoints (even control endpoint), report disconnect to
+ * the gadget user.
+ */
+static void stop_activity(struct pxa_udc *udc)
+{
+	int i;
+
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+
+	for (i = 0; i < NR_USB_ENDPOINTS; i++)
+		pxa_ep_disable(&udc->udc_usb_ep[i].usb_ep);
+}
+
+/**
+ * pxa27x_udc_stop - Unregister the gadget driver
+ * @g: gadget
+ *
+ * Returns 0 if no error, -ENODEV, -EINVAL otherwise
+ */
+static int pxa27x_udc_stop(struct usb_gadget *g)
+{
+	struct pxa_udc *udc = to_pxa(g);
+
+	stop_activity(udc);
+	udc_disable(udc);
+
+	udc->driver = NULL;
+
+	if (!IS_ERR_OR_NULL(udc->transceiver))
+		return otg_set_peripheral(udc->transceiver->otg, NULL);
+	return 0;
+}
+
+/**
+ * handle_ep0_ctrl_req - handle control endpoint control request
+ * @udc: udc device
+ * @req: control request
+ */
+static void handle_ep0_ctrl_req(struct pxa_udc *udc,
+				struct pxa27x_request *req)
+{
+	struct pxa_ep *ep = &udc->pxa_ep[0];
+	union {
+		struct usb_ctrlrequest	r;
+		u32			word[2];
+	} u;
+	int i;
+	int have_extrabytes = 0;
+	unsigned long flags;
+
+	nuke(ep, -EPROTO);
+	spin_lock_irqsave(&ep->lock, flags);
+
+	/*
+	 * In the PXA320 manual, in the section about Back-to-Back setup
+	 * packets, it describes this situation.  The solution is to set OPC to
+	 * get rid of the status packet, and then continue with the setup
+	 * packet. Generalize to pxa27x CPUs.
+	 */
+	if (epout_has_pkt(ep) && (ep_count_bytes_remain(ep) == 0))
+		ep_write_UDCCSR(ep, UDCCSR0_OPC);
+
+	/* read SETUP packet */
+	for (i = 0; i < 2; i++) {
+		if (unlikely(ep_is_empty(ep)))
+			goto stall;
+		u.word[i] = udc_ep_readl(ep, UDCDR);
+	}
+
+	have_extrabytes = !ep_is_empty(ep);
+	while (!ep_is_empty(ep)) {
+		i = udc_ep_readl(ep, UDCDR);
+		ep_err(ep, "wrong to have extra bytes for setup : 0x%08x\n", i);
+	}
+
+	ep_dbg(ep, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+		u.r.bRequestType, u.r.bRequest,
+		le16_to_cpu(u.r.wValue), le16_to_cpu(u.r.wIndex),
+		le16_to_cpu(u.r.wLength));
+	if (unlikely(have_extrabytes))
+		goto stall;
+
+	if (u.r.bRequestType & USB_DIR_IN)
+		set_ep0state(udc, IN_DATA_STAGE);
+	else
+		set_ep0state(udc, OUT_DATA_STAGE);
+
+	/* Tell UDC to enter Data Stage */
+	ep_write_UDCCSR(ep, UDCCSR0_SA | UDCCSR0_OPC);
+
+	spin_unlock_irqrestore(&ep->lock, flags);
+	i = udc->driver->setup(&udc->gadget, &u.r);
+	spin_lock_irqsave(&ep->lock, flags);
+	if (i < 0)
+		goto stall;
+out:
+	spin_unlock_irqrestore(&ep->lock, flags);
+	return;
+stall:
+	ep_dbg(ep, "protocol STALL, udccsr0=%03x err %d\n",
+		udc_ep_readl(ep, UDCCSR), i);
+	ep_write_UDCCSR(ep, UDCCSR0_FST | UDCCSR0_FTF);
+	set_ep0state(udc, STALL);
+	goto out;
+}
+
+/**
+ * handle_ep0 - Handle control endpoint data transfers
+ * @udc: udc device
+ * @fifo_irq: 1 if triggered by fifo service type irq
+ * @opc_irq: 1 if triggered by output packet complete type irq
+ *
+ * Context : interrupt handler
+ *
+ * Tries to transfer all pending request data into the endpoint and/or
+ * transfer all pending data in the endpoint into usb requests.
+ * Handles states of ep0 automata.
+ *
+ * PXA27x hardware handles several standard usb control requests without
+ * driver notification.  The requests fully handled by hardware are :
+ *  SET_ADDRESS, SET_FEATURE, CLEAR_FEATURE, GET_CONFIGURATION, GET_INTERFACE,
+ *  GET_STATUS
+ * The requests handled by hardware, but with irq notification are :
+ *  SYNCH_FRAME, SET_CONFIGURATION, SET_INTERFACE
+ * The remaining standard requests really handled by handle_ep0 are :
+ *  GET_DESCRIPTOR, SET_DESCRIPTOR, specific requests.
+ * Requests standardized outside of USB 2.0 chapter 9 are handled more
+ * uniformly, by gadget drivers.
+ *
+ * The control endpoint state machine is _not_ USB spec compliant, it's even
+ * hardly compliant with Intel PXA270 developers guide.
+ * The key points which inferred this state machine are :
+ *   - on every setup token, bit UDCCSR0_SA is raised and held until cleared by
+ *     software.
+ *   - on every OUT packet received, UDCCSR0_OPC is raised and held until
+ *     cleared by software.
+ *   - clearing UDCCSR0_OPC always flushes ep0. If in setup stage, never do it
+ *     before reading ep0.
+ *     This is true only for PXA27x. This is not true anymore for PXA3xx family
+ *     (check Back-to-Back setup packet in developers guide).
+ *   - irq can be called on a "packet complete" event (opc_irq=1), while
+ *     UDCCSR0_OPC is not yet raised (delta can be as big as 100ms
+ *     from experimentation).
+ *   - as UDCCSR0_SA can be activated while in irq handling, and clearing
+ *     UDCCSR0_OPC would flush the setup data, we almost never clear UDCCSR0_OPC
+ *     => we never actually read the "status stage" packet of an IN data stage
+ *     => this is not documented in Intel documentation
+ *   - hardware as no idea of STATUS STAGE, it only handle SETUP STAGE and DATA
+ *     STAGE. The driver add STATUS STAGE to send last zero length packet in
+ *     OUT_STATUS_STAGE.
+ *   - special attention was needed for IN_STATUS_STAGE. If a packet complete
+ *     event is detected, we terminate the status stage without ackowledging the
+ *     packet (not to risk to loose a potential SETUP packet)
+ */
+static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
+{
+	u32			udccsr0;
+	struct pxa_ep		*ep = &udc->pxa_ep[0];
+	struct pxa27x_request	*req = NULL;
+	int			completed = 0;
+
+	if (!list_empty(&ep->queue))
+		req = list_entry(ep->queue.next, struct pxa27x_request, queue);
+
+	udccsr0 = udc_ep_readl(ep, UDCCSR);
+	ep_dbg(ep, "state=%s, req=%p, udccsr0=0x%03x, udcbcr=%d, irq_msk=%x\n",
+		EP0_STNAME(udc), req, udccsr0, udc_ep_readl(ep, UDCBCR),
+		(fifo_irq << 1 | opc_irq));
+
+	if (udccsr0 & UDCCSR0_SST) {
+		ep_dbg(ep, "clearing stall status\n");
+		nuke(ep, -EPIPE);
+		ep_write_UDCCSR(ep, UDCCSR0_SST);
+		ep0_idle(udc);
+	}
+
+	if (udccsr0 & UDCCSR0_SA) {
+		nuke(ep, 0);
+		set_ep0state(udc, SETUP_STAGE);
+	}
+
+	switch (udc->ep0state) {
+	case WAIT_FOR_SETUP:
+		/*
+		 * Hardware bug : beware, we cannot clear OPC, since we would
+		 * miss a potential OPC irq for a setup packet.
+		 * So, we only do ... nothing, and hope for a next irq with
+		 * UDCCSR0_SA set.
+		 */
+		break;
+	case SETUP_STAGE:
+		udccsr0 &= UDCCSR0_CTRL_REQ_MASK;
+		if (likely(udccsr0 == UDCCSR0_CTRL_REQ_MASK))
+			handle_ep0_ctrl_req(udc, req);
+		break;
+	case IN_DATA_STAGE:			/* GET_DESCRIPTOR */
+		if (epout_has_pkt(ep))
+			ep_write_UDCCSR(ep, UDCCSR0_OPC);
+		if (req && !ep_is_full(ep))
+			completed = write_ep0_fifo(ep, req);
+		if (completed)
+			ep0_end_in_req(ep, req, NULL);
+		break;
+	case OUT_DATA_STAGE:			/* SET_DESCRIPTOR */
+		if (epout_has_pkt(ep) && req)
+			completed = read_ep0_fifo(ep, req);
+		if (completed)
+			ep0_end_out_req(ep, req, NULL);
+		break;
+	case STALL:
+		ep_write_UDCCSR(ep, UDCCSR0_FST);
+		break;
+	case IN_STATUS_STAGE:
+		/*
+		 * Hardware bug : beware, we cannot clear OPC, since we would
+		 * miss a potential PC irq for a setup packet.
+		 * So, we only put the ep0 into WAIT_FOR_SETUP state.
+		 */
+		if (opc_irq)
+			ep0_idle(udc);
+		break;
+	case OUT_STATUS_STAGE:
+	case WAIT_ACK_SET_CONF_INTERF:
+		ep_warn(ep, "should never get in %s state here!!!\n",
+				EP0_STNAME(ep->dev));
+		ep0_idle(udc);
+		break;
+	}
+}
+
+/**
+ * handle_ep - Handle endpoint data tranfers
+ * @ep: pxa physical endpoint
+ *
+ * Tries to transfer all pending request data into the endpoint and/or
+ * transfer all pending data in the endpoint into usb requests.
+ *
+ * Is always called from the interrupt handler. ep->lock must not be held.
+ */
+static void handle_ep(struct pxa_ep *ep)
+{
+	struct pxa27x_request	*req;
+	int completed;
+	u32 udccsr;
+	int is_in = ep->dir_in;
+	int loop = 0;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+	if (ep->in_handle_ep)
+		goto recursion_detected;
+	ep->in_handle_ep = 1;
+
+	do {
+		completed = 0;
+		udccsr = udc_ep_readl(ep, UDCCSR);
+
+		if (likely(!list_empty(&ep->queue)))
+			req = list_entry(ep->queue.next,
+					struct pxa27x_request, queue);
+		else
+			req = NULL;
+
+		ep_dbg(ep, "req:%p, udccsr 0x%03x loop=%d\n",
+				req, udccsr, loop++);
+
+		if (unlikely(udccsr & (UDCCSR_SST | UDCCSR_TRN)))
+			udc_ep_writel(ep, UDCCSR,
+					udccsr & (UDCCSR_SST | UDCCSR_TRN));
+		if (!req)
+			break;
+
+		if (unlikely(is_in)) {
+			if (likely(!ep_is_full(ep)))
+				completed = write_fifo(ep, req);
+		} else {
+			if (likely(epout_has_pkt(ep)))
+				completed = read_fifo(ep, req);
+		}
+
+		if (completed) {
+			if (is_in)
+				ep_end_in_req(ep, req, &flags);
+			else
+				ep_end_out_req(ep, req, &flags);
+		}
+	} while (completed);
+
+	ep->in_handle_ep = 0;
+recursion_detected:
+	spin_unlock_irqrestore(&ep->lock, flags);
+}
+
+/**
+ * pxa27x_change_configuration - Handle SET_CONF usb request notification
+ * @udc: udc device
+ * @config: usb configuration
+ *
+ * Post the request to upper level.
+ * Don't use any pxa specific harware configuration capabilities
+ */
+static void pxa27x_change_configuration(struct pxa_udc *udc, int config)
+{
+	struct usb_ctrlrequest req ;
+
+	dev_dbg(udc->dev, "config=%d\n", config);
+
+	udc->config = config;
+	udc->last_interface = 0;
+	udc->last_alternate = 0;
+
+	req.bRequestType = 0;
+	req.bRequest = USB_REQ_SET_CONFIGURATION;
+	req.wValue = config;
+	req.wIndex = 0;
+	req.wLength = 0;
+
+	set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF);
+	udc->driver->setup(&udc->gadget, &req);
+	ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_AREN);
+}
+
+/**
+ * pxa27x_change_interface - Handle SET_INTERF usb request notification
+ * @udc: udc device
+ * @iface: interface number
+ * @alt: alternate setting number
+ *
+ * Post the request to upper level.
+ * Don't use any pxa specific harware configuration capabilities
+ */
+static void pxa27x_change_interface(struct pxa_udc *udc, int iface, int alt)
+{
+	struct usb_ctrlrequest  req;
+
+	dev_dbg(udc->dev, "interface=%d, alternate setting=%d\n", iface, alt);
+
+	udc->last_interface = iface;
+	udc->last_alternate = alt;
+
+	req.bRequestType = USB_RECIP_INTERFACE;
+	req.bRequest = USB_REQ_SET_INTERFACE;
+	req.wValue = alt;
+	req.wIndex = iface;
+	req.wLength = 0;
+
+	set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF);
+	udc->driver->setup(&udc->gadget, &req);
+	ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_AREN);
+}
+
+/*
+ * irq_handle_data - Handle data transfer
+ * @irq: irq IRQ number
+ * @udc: dev pxa_udc device structure
+ *
+ * Called from irq handler, transferts data to or from endpoint to queue
+ */
+static void irq_handle_data(int irq, struct pxa_udc *udc)
+{
+	int i;
+	struct pxa_ep *ep;
+	u32 udcisr0 = udc_readl(udc, UDCISR0) & UDCCISR0_EP_MASK;
+	u32 udcisr1 = udc_readl(udc, UDCISR1) & UDCCISR1_EP_MASK;
+
+	if (udcisr0 & UDCISR_INT_MASK) {
+		udc->pxa_ep[0].stats.irqs++;
+		udc_writel(udc, UDCISR0, UDCISR_INT(0, UDCISR_INT_MASK));
+		handle_ep0(udc, !!(udcisr0 & UDCICR_FIFOERR),
+				!!(udcisr0 & UDCICR_PKTCOMPL));
+	}
+
+	udcisr0 >>= 2;
+	for (i = 1; udcisr0 != 0 && i < 16; udcisr0 >>= 2, i++) {
+		if (!(udcisr0 & UDCISR_INT_MASK))
+			continue;
+
+		udc_writel(udc, UDCISR0, UDCISR_INT(i, UDCISR_INT_MASK));
+
+		WARN_ON(i >= ARRAY_SIZE(udc->pxa_ep));
+		if (i < ARRAY_SIZE(udc->pxa_ep)) {
+			ep = &udc->pxa_ep[i];
+			ep->stats.irqs++;
+			handle_ep(ep);
+		}
+	}
+
+	for (i = 16; udcisr1 != 0 && i < 24; udcisr1 >>= 2, i++) {
+		udc_writel(udc, UDCISR1, UDCISR_INT(i - 16, UDCISR_INT_MASK));
+		if (!(udcisr1 & UDCISR_INT_MASK))
+			continue;
+
+		WARN_ON(i >= ARRAY_SIZE(udc->pxa_ep));
+		if (i < ARRAY_SIZE(udc->pxa_ep)) {
+			ep = &udc->pxa_ep[i];
+			ep->stats.irqs++;
+			handle_ep(ep);
+		}
+	}
+
+}
+
+/**
+ * irq_udc_suspend - Handle IRQ "UDC Suspend"
+ * @udc: udc device
+ */
+static void irq_udc_suspend(struct pxa_udc *udc)
+{
+	udc_writel(udc, UDCISR1, UDCISR1_IRSU);
+	udc->stats.irqs_suspend++;
+
+	if (udc->gadget.speed != USB_SPEED_UNKNOWN
+			&& udc->driver && udc->driver->suspend)
+		udc->driver->suspend(&udc->gadget);
+	ep0_idle(udc);
+}
+
+/**
+  * irq_udc_resume - Handle IRQ "UDC Resume"
+  * @udc: udc device
+  */
+static void irq_udc_resume(struct pxa_udc *udc)
+{
+	udc_writel(udc, UDCISR1, UDCISR1_IRRU);
+	udc->stats.irqs_resume++;
+
+	if (udc->gadget.speed != USB_SPEED_UNKNOWN
+			&& udc->driver && udc->driver->resume)
+		udc->driver->resume(&udc->gadget);
+}
+
+/**
+ * irq_udc_reconfig - Handle IRQ "UDC Change Configuration"
+ * @udc: udc device
+ */
+static void irq_udc_reconfig(struct pxa_udc *udc)
+{
+	unsigned config, interface, alternate, config_change;
+	u32 udccr = udc_readl(udc, UDCCR);
+
+	udc_writel(udc, UDCISR1, UDCISR1_IRCC);
+	udc->stats.irqs_reconfig++;
+
+	config = (udccr & UDCCR_ACN) >> UDCCR_ACN_S;
+	config_change = (config != udc->config);
+	pxa27x_change_configuration(udc, config);
+
+	interface = (udccr & UDCCR_AIN) >> UDCCR_AIN_S;
+	alternate = (udccr & UDCCR_AAISN) >> UDCCR_AAISN_S;
+	pxa27x_change_interface(udc, interface, alternate);
+
+	if (config_change)
+		update_pxa_ep_matches(udc);
+	udc_set_mask_UDCCR(udc, UDCCR_SMAC);
+}
+
+/**
+ * irq_udc_reset - Handle IRQ "UDC Reset"
+ * @udc: udc device
+ */
+static void irq_udc_reset(struct pxa_udc *udc)
+{
+	u32 udccr = udc_readl(udc, UDCCR);
+	struct pxa_ep *ep = &udc->pxa_ep[0];
+
+	dev_info(udc->dev, "USB reset\n");
+	udc_writel(udc, UDCISR1, UDCISR1_IRRS);
+	udc->stats.irqs_reset++;
+
+	if ((udccr & UDCCR_UDA) == 0) {
+		dev_dbg(udc->dev, "USB reset start\n");
+		stop_activity(udc);
+	}
+	udc->gadget.speed = USB_SPEED_FULL;
+	memset(&udc->stats, 0, sizeof udc->stats);
+
+	nuke(ep, -EPROTO);
+	ep_write_UDCCSR(ep, UDCCSR0_FTF | UDCCSR0_OPC);
+	ep0_idle(udc);
+}
+
+/**
+ * pxa_udc_irq - Main irq handler
+ * @irq: irq number
+ * @_dev: udc device
+ *
+ * Handles all udc interrupts
+ */
+static irqreturn_t pxa_udc_irq(int irq, void *_dev)
+{
+	struct pxa_udc *udc = _dev;
+	u32 udcisr0 = udc_readl(udc, UDCISR0);
+	u32 udcisr1 = udc_readl(udc, UDCISR1);
+	u32 udccr = udc_readl(udc, UDCCR);
+	u32 udcisr1_spec;
+
+	dev_vdbg(udc->dev, "Interrupt, UDCISR0:0x%08x, UDCISR1:0x%08x, "
+		 "UDCCR:0x%08x\n", udcisr0, udcisr1, udccr);
+
+	udcisr1_spec = udcisr1 & 0xf8000000;
+	if (unlikely(udcisr1_spec & UDCISR1_IRSU))
+		irq_udc_suspend(udc);
+	if (unlikely(udcisr1_spec & UDCISR1_IRRU))
+		irq_udc_resume(udc);
+	if (unlikely(udcisr1_spec & UDCISR1_IRCC))
+		irq_udc_reconfig(udc);
+	if (unlikely(udcisr1_spec & UDCISR1_IRRS))
+		irq_udc_reset(udc);
+
+	if ((udcisr0 & UDCCISR0_EP_MASK) | (udcisr1 & UDCCISR1_EP_MASK))
+		irq_handle_data(irq, udc);
+
+	return IRQ_HANDLED;
+}
+
+static struct pxa_udc memory = {
+	.gadget = {
+		.ops		= &pxa_udc_ops,
+		.ep0		= &memory.udc_usb_ep[0].usb_ep,
+		.name		= driver_name,
+		.dev = {
+			.init_name	= "gadget",
+		},
+	},
+
+	.udc_usb_ep = {
+		USB_EP_CTRL,
+		USB_EP_OUT_BULK(1),
+		USB_EP_IN_BULK(2),
+		USB_EP_IN_ISO(3),
+		USB_EP_OUT_ISO(4),
+		USB_EP_IN_INT(5),
+	},
+
+	.pxa_ep = {
+		PXA_EP_CTRL,
+		/* Endpoints for gadget zero */
+		PXA_EP_OUT_BULK(1, 1, 3, 0, 0),
+		PXA_EP_IN_BULK(2,  2, 3, 0, 0),
+		/* Endpoints for ether gadget, file storage gadget */
+		PXA_EP_OUT_BULK(3, 1, 1, 0, 0),
+		PXA_EP_IN_BULK(4,  2, 1, 0, 0),
+		PXA_EP_IN_ISO(5,   3, 1, 0, 0),
+		PXA_EP_OUT_ISO(6,  4, 1, 0, 0),
+		PXA_EP_IN_INT(7,   5, 1, 0, 0),
+		/* Endpoints for RNDIS, serial */
+		PXA_EP_OUT_BULK(8, 1, 2, 0, 0),
+		PXA_EP_IN_BULK(9,  2, 2, 0, 0),
+		PXA_EP_IN_INT(10,  5, 2, 0, 0),
+		/*
+		 * All the following endpoints are only for completion.  They
+		 * won't never work, as multiple interfaces are really broken on
+		 * the pxa.
+		*/
+		PXA_EP_OUT_BULK(11, 1, 2, 1, 0),
+		PXA_EP_IN_BULK(12,  2, 2, 1, 0),
+		/* Endpoint for CDC Ether */
+		PXA_EP_OUT_BULK(13, 1, 1, 1, 1),
+		PXA_EP_IN_BULK(14,  2, 1, 1, 1),
+	}
+};
+
+#if defined(CONFIG_OF)
+static const struct of_device_id udc_pxa_dt_ids[] = {
+	{ .compatible = "marvell,pxa270-udc" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, udc_pxa_dt_ids);
+#endif
+
+/**
+ * pxa_udc_probe - probes the udc device
+ * @pdev: platform device
+ *
+ * Perform basic init : allocates udc clock, creates sysfs files, requests
+ * irq.
+ */
+static int pxa_udc_probe(struct platform_device *pdev)
+{
+	struct pxa_udc *udc = &memory;
+	int retval = 0, gpio;
+	struct pxa2xx_udc_mach_info *mach = dev_get_platdata(&pdev->dev);
+	unsigned long gpio_flags;
+
+	if (mach) {
+		gpio_flags = mach->gpio_pullup_inverted ? GPIOF_ACTIVE_LOW : 0;
+		gpio = mach->gpio_pullup;
+		if (gpio_is_valid(gpio)) {
+			retval = devm_gpio_request_one(&pdev->dev, gpio,
+						       gpio_flags,
+						       "USB D+ pullup");
+			if (retval)
+				return retval;
+			udc->gpiod = gpio_to_desc(mach->gpio_pullup);
+		}
+		udc->udc_command = mach->udc_command;
+	} else {
+		udc->gpiod = devm_gpiod_get(&pdev->dev, NULL, GPIOD_ASIS);
+	}
+
+	udc->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(udc->regs))
+		return PTR_ERR(udc->regs);
+	udc->irq = platform_get_irq(pdev, 0);
+	if (udc->irq < 0)
+		return udc->irq;
+
+	udc->dev = &pdev->dev;
+	if (of_have_populated_dt()) {
+		udc->transceiver =
+			devm_usb_get_phy_by_phandle(udc->dev, "phys", 0);
+		if (IS_ERR(udc->transceiver))
+			return PTR_ERR(udc->transceiver);
+	} else {
+		udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+	}
+
+	if (IS_ERR(udc->gpiod)) {
+		dev_err(&pdev->dev, "Couldn't find or request D+ gpio : %ld\n",
+			PTR_ERR(udc->gpiod));
+		return PTR_ERR(udc->gpiod);
+	}
+	if (udc->gpiod)
+		gpiod_direction_output(udc->gpiod, 0);
+
+	udc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(udc->clk))
+		return PTR_ERR(udc->clk);
+
+	retval = clk_prepare(udc->clk);
+	if (retval)
+		return retval;
+
+	udc->vbus_sensed = 0;
+
+	the_controller = udc;
+	platform_set_drvdata(pdev, udc);
+	udc_init_data(udc);
+
+	/* irq setup after old hardware state is cleaned up */
+	retval = devm_request_irq(&pdev->dev, udc->irq, pxa_udc_irq,
+				  IRQF_SHARED, driver_name, udc);
+	if (retval != 0) {
+		dev_err(udc->dev, "%s: can't get irq %i, err %d\n",
+			driver_name, udc->irq, retval);
+		goto err;
+	}
+
+	if (!IS_ERR_OR_NULL(udc->transceiver))
+		usb_register_notifier(udc->transceiver, &pxa27x_udc_phy);
+	retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
+	if (retval)
+		goto err_add_gadget;
+
+	pxa_init_debugfs(udc);
+	if (should_enable_udc(udc))
+		udc_enable(udc);
+	return 0;
+
+err_add_gadget:
+	if (!IS_ERR_OR_NULL(udc->transceiver))
+		usb_unregister_notifier(udc->transceiver, &pxa27x_udc_phy);
+err:
+	clk_unprepare(udc->clk);
+	return retval;
+}
+
+/**
+ * pxa_udc_remove - removes the udc device driver
+ * @_dev: platform device
+ */
+static int pxa_udc_remove(struct platform_device *_dev)
+{
+	struct pxa_udc *udc = platform_get_drvdata(_dev);
+
+	usb_del_gadget_udc(&udc->gadget);
+	pxa_cleanup_debugfs(udc);
+
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
+		usb_unregister_notifier(udc->transceiver, &pxa27x_udc_phy);
+		usb_put_phy(udc->transceiver);
+	}
+
+	udc->transceiver = NULL;
+	the_controller = NULL;
+	clk_unprepare(udc->clk);
+
+	return 0;
+}
+
+static void pxa_udc_shutdown(struct platform_device *_dev)
+{
+	struct pxa_udc *udc = platform_get_drvdata(_dev);
+
+	if (udc_readl(udc, UDCCR) & UDCCR_UDE)
+		udc_disable(udc);
+}
+
+#ifdef CONFIG_PXA27x
+extern void pxa27x_clear_otgph(void);
+#else
+#define pxa27x_clear_otgph()   do {} while (0)
+#endif
+
+#ifdef CONFIG_PM
+/**
+ * pxa_udc_suspend - Suspend udc device
+ * @_dev: platform device
+ * @state: suspend state
+ *
+ * Suspends udc : saves configuration registers (UDCCR*), then disables the udc
+ * device.
+ */
+static int pxa_udc_suspend(struct platform_device *_dev, pm_message_t state)
+{
+	struct pxa_udc *udc = platform_get_drvdata(_dev);
+	struct pxa_ep *ep;
+
+	ep = &udc->pxa_ep[0];
+	udc->udccsr0 = udc_ep_readl(ep, UDCCSR);
+
+	udc_disable(udc);
+	udc->pullup_resume = udc->pullup_on;
+	dplus_pullup(udc, 0);
+
+	if (udc->driver)
+		udc->driver->disconnect(&udc->gadget);
+
+	return 0;
+}
+
+/**
+ * pxa_udc_resume - Resume udc device
+ * @_dev: platform device
+ *
+ * Resumes udc : restores configuration registers (UDCCR*), then enables the udc
+ * device.
+ */
+static int pxa_udc_resume(struct platform_device *_dev)
+{
+	struct pxa_udc *udc = platform_get_drvdata(_dev);
+	struct pxa_ep *ep;
+
+	ep = &udc->pxa_ep[0];
+	udc_ep_writel(ep, UDCCSR, udc->udccsr0 & (UDCCSR0_FST | UDCCSR0_DME));
+
+	dplus_pullup(udc, udc->pullup_resume);
+	if (should_enable_udc(udc))
+		udc_enable(udc);
+	/*
+	 * We do not handle OTG yet.
+	 *
+	 * OTGPH bit is set when sleep mode is entered.
+	 * it indicates that OTG pad is retaining its state.
+	 * Upon exit from sleep mode and before clearing OTGPH,
+	 * Software must configure the USB OTG pad, UDC, and UHC
+	 * to the state they were in before entering sleep mode.
+	 */
+	pxa27x_clear_otgph();
+
+	return 0;
+}
+#endif
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:pxa27x-udc");
+
+static struct platform_driver udc_driver = {
+	.driver		= {
+		.name	= "pxa27x-udc",
+		.of_match_table = of_match_ptr(udc_pxa_dt_ids),
+	},
+	.probe		= pxa_udc_probe,
+	.remove		= pxa_udc_remove,
+	.shutdown	= pxa_udc_shutdown,
+#ifdef CONFIG_PM
+	.suspend	= pxa_udc_suspend,
+	.resume		= pxa_udc_resume
+#endif
+};
+
+module_platform_driver(udc_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Robert Jarzmik");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.h b/drivers/usb/gadget/udc/pxa27x_udc.h
new file mode 100644
index 000000000..31bf79ce9
--- /dev/null
+++ b/drivers/usb/gadget/udc/pxa27x_udc.h
@@ -0,0 +1,498 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * linux/drivers/usb/gadget/pxa27x_udc.h
+ * Intel PXA27x on-chip full speed USB device controller
+ *
+ * Inspired by original driver by Frank Becker, David Brownell, and others.
+ * Copyright (C) 2008 Robert Jarzmik
+ */
+
+#ifndef __LINUX_USB_GADGET_PXA27X_H
+#define __LINUX_USB_GADGET_PXA27X_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/usb/otg.h>
+
+/*
+ * Register definitions
+ */
+/* Offsets */
+#define UDCCR		0x0000		/* UDC Control Register */
+#define UDCICR0		0x0004		/* UDC Interrupt Control Register0 */
+#define UDCICR1		0x0008		/* UDC Interrupt Control Register1 */
+#define UDCISR0		0x000C		/* UDC Interrupt Status Register 0 */
+#define UDCISR1		0x0010		/* UDC Interrupt Status Register 1 */
+#define UDCFNR		0x0014		/* UDC Frame Number Register */
+#define UDCOTGICR	0x0018		/* UDC On-The-Go interrupt control */
+#define UP2OCR		0x0020		/* USB Port 2 Output Control register */
+#define UP3OCR		0x0024		/* USB Port 3 Output Control register */
+#define UDCCSRn(x)	(0x0100 + ((x)<<2)) /* UDC Control/Status register */
+#define UDCBCRn(x)	(0x0200 + ((x)<<2)) /* UDC Byte Count Register */
+#define UDCDRn(x)	(0x0300 + ((x)<<2)) /* UDC Data Register  */
+#define UDCCRn(x)	(0x0400 + ((x)<<2)) /* UDC Control Register */
+
+#define UDCCR_OEN	(1 << 31)	/* On-the-Go Enable */
+#define UDCCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation
+					   Protocol Port Support */
+#define UDCCR_AHNP	(1 << 29)	/* A-device Host Negotiation Protocol
+					   Support */
+#define UDCCR_BHNP	(1 << 28)	/* B-device Host Negotiation Protocol
+					   Enable */
+#define UDCCR_DWRE	(1 << 16)	/* Device Remote Wake-up Enable */
+#define UDCCR_ACN	(0x03 << 11)	/* Active UDC configuration Number */
+#define UDCCR_ACN_S	11
+#define UDCCR_AIN	(0x07 << 8)	/* Active UDC interface Number */
+#define UDCCR_AIN_S	8
+#define UDCCR_AAISN	(0x07 << 5)	/* Active UDC Alternate Interface
+					   Setting Number */
+#define UDCCR_AAISN_S	5
+#define UDCCR_SMAC	(1 << 4)	/* Switch Endpoint Memory to Active
+					   Configuration */
+#define UDCCR_EMCE	(1 << 3)	/* Endpoint Memory Configuration
+					   Error */
+#define UDCCR_UDR	(1 << 2)	/* UDC Resume */
+#define UDCCR_UDA	(1 << 1)	/* UDC Active */
+#define UDCCR_UDE	(1 << 0)	/* UDC Enable */
+
+#define UDCICR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCICR1_IECC	(1 << 31)	/* IntEn - Configuration Change */
+#define UDCICR1_IESOF	(1 << 30)	/* IntEn - Start of Frame */
+#define UDCICR1_IERU	(1 << 29)	/* IntEn - Resume */
+#define UDCICR1_IESU	(1 << 28)	/* IntEn - Suspend */
+#define UDCICR1_IERS	(1 << 27)	/* IntEn - Reset */
+#define UDCICR_FIFOERR	(1 << 1)	/* FIFO Error interrupt for EP */
+#define UDCICR_PKTCOMPL	(1 << 0)	/* Packet Complete interrupt for EP */
+#define UDCICR_INT_MASK	(UDCICR_FIFOERR | UDCICR_PKTCOMPL)
+
+#define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCISR1_IRCC	(1 << 31)	/* IntReq - Configuration Change */
+#define UDCISR1_IRSOF	(1 << 30)	/* IntReq - Start of Frame */
+#define UDCISR1_IRRU	(1 << 29)	/* IntReq - Resume */
+#define UDCISR1_IRSU	(1 << 28)	/* IntReq - Suspend */
+#define UDCISR1_IRRS	(1 << 27)	/* IntReq - Reset */
+#define UDCISR_INT_MASK	(UDCICR_FIFOERR | UDCICR_PKTCOMPL)
+
+#define UDCOTGICR_IESF	(1 << 24)	/* OTG SET_FEATURE command recvd */
+#define UDCOTGICR_IEXR	(1 << 17)	/* Extra Transceiver Interrupt
+					   Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEXF	(1 << 16)	/* Extra Transceiver Interrupt
+					   Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40R (1 << 9)	/* OTG Vbus Valid 4.0V Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV40F (1 << 8)	/* OTG Vbus Valid 4.0V Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV44R (1 << 7)	/* OTG Vbus Valid 4.4V Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV44F (1 << 6)	/* OTG Vbus Valid 4.4V Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESVR	(1 << 5)	/* OTG Session Valid Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESVF	(1 << 4)	/* OTG Session Valid Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESDR	(1 << 3)	/* OTG A-Device SRP Detect Rising
+					   Edge Interrupt Enable */
+#define UDCOTGICR_IESDF	(1 << 2)	/* OTG A-Device SRP Detect Falling
+					   Edge Interrupt Enable */
+#define UDCOTGICR_IEIDR	(1 << 1)	/* OTG ID Change Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEIDF	(1 << 0)	/* OTG ID Change Falling Edge
+					   Interrupt Enable */
+
+/* Host Port 2 field bits */
+#define UP2OCR_CPVEN	(1 << 0)	/* Charge Pump Vbus Enable */
+#define UP2OCR_CPVPE	(1 << 1)	/* Charge Pump Vbus Pulse Enable */
+					/* Transceiver enablers */
+#define UP2OCR_DPPDE	(1 << 2)	/*   D+ Pull Down Enable */
+#define UP2OCR_DMPDE	(1 << 3)	/*   D- Pull Down Enable */
+#define UP2OCR_DPPUE	(1 << 4)	/*   D+ Pull Up Enable */
+#define UP2OCR_DMPUE	(1 << 5)	/*   D- Pull Up Enable */
+#define UP2OCR_DPPUBE	(1 << 6)	/*   D+ Pull Up Bypass Enable */
+#define UP2OCR_DMPUBE	(1 << 7)	/*   D- Pull Up Bypass Enable */
+#define UP2OCR_EXSP	(1 << 8)	/* External Transceiver Speed Control */
+#define UP2OCR_EXSUS	(1 << 9)	/* External Transceiver Speed Enable */
+#define UP2OCR_IDON	(1 << 10)	/* OTG ID Read Enable */
+#define UP2OCR_HXS	(1 << 16)	/* Transceiver Output Select */
+#define UP2OCR_HXOE	(1 << 17)	/* Transceiver Output Enable */
+#define UP2OCR_SEOS	(1 << 24)	/* Single-Ended Output Select */
+
+#define UDCCSR0_ACM	(1 << 9)	/* Ack Control Mode */
+#define UDCCSR0_AREN	(1 << 8)	/* Ack Response Enable */
+#define UDCCSR0_SA	(1 << 7)	/* Setup Active */
+#define UDCCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
+#define UDCCSR0_FST	(1 << 5)	/* Force Stall */
+#define UDCCSR0_SST	(1 << 4)	/* Sent Stall */
+#define UDCCSR0_DME	(1 << 3)	/* DMA Enable */
+#define UDCCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
+#define UDCCSR0_IPR	(1 << 1)	/* IN Packet Ready */
+#define UDCCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
+
+#define UDCCSR_DPE	(1 << 9)	/* Data Packet Error */
+#define UDCCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
+#define UDCCSR_SP	(1 << 7)	/* Short Packet Control/Status */
+#define UDCCSR_BNE	(1 << 6)	/* Buffer Not Empty (IN endpoints) */
+#define UDCCSR_BNF	(1 << 6)	/* Buffer Not Full (OUT endpoints) */
+#define UDCCSR_FST	(1 << 5)	/* Force STALL */
+#define UDCCSR_SST	(1 << 4)	/* Sent STALL */
+#define UDCCSR_DME	(1 << 3)	/* DMA Enable */
+#define UDCCSR_TRN	(1 << 2)	/* Tx/Rx NAK */
+#define UDCCSR_PC	(1 << 1)	/* Packet Complete */
+#define UDCCSR_FS	(1 << 0)	/* FIFO needs service */
+
+#define UDCCONR_CN	(0x03 << 25)	/* Configuration Number */
+#define UDCCONR_CN_S	25
+#define UDCCONR_IN	(0x07 << 22)	/* Interface Number */
+#define UDCCONR_IN_S	22
+#define UDCCONR_AISN	(0x07 << 19)	/* Alternate Interface Number */
+#define UDCCONR_AISN_S	19
+#define UDCCONR_EN	(0x0f << 15)	/* Endpoint Number */
+#define UDCCONR_EN_S	15
+#define UDCCONR_ET	(0x03 << 13)	/* Endpoint Type: */
+#define UDCCONR_ET_S	13
+#define UDCCONR_ET_INT	(0x03 << 13)	/*   Interrupt */
+#define UDCCONR_ET_BULK	(0x02 << 13)	/*   Bulk */
+#define UDCCONR_ET_ISO	(0x01 << 13)	/*   Isochronous */
+#define UDCCONR_ET_NU	(0x00 << 13)	/*   Not used */
+#define UDCCONR_ED	(1 << 12)	/* Endpoint Direction */
+#define UDCCONR_MPS	(0x3ff << 2)	/* Maximum Packet Size */
+#define UDCCONR_MPS_S	2
+#define UDCCONR_DE	(1 << 1)	/* Double Buffering Enable */
+#define UDCCONR_EE	(1 << 0)	/* Endpoint Enable */
+
+#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_SMAC | UDCCR_UDR | UDCCR_UDE)
+#define UDCCSR_WR_MASK	(UDCCSR_DME | UDCCSR_FST)
+#define UDC_FNR_MASK	(0x7ff)
+#define UDC_BCR_MASK	(0x3ff)
+
+/*
+ * UDCCR = UDC Endpoint Configuration Registers
+ * UDCCSR = UDC Control/Status Register for this EP
+ * UDCBCR = UDC Byte Count Remaining (contents of OUT fifo)
+ * UDCDR = UDC Endpoint Data Register (the fifo)
+ */
+#define ofs_UDCCR(ep)	(UDCCRn(ep->idx))
+#define ofs_UDCCSR(ep)	(UDCCSRn(ep->idx))
+#define ofs_UDCBCR(ep)	(UDCBCRn(ep->idx))
+#define ofs_UDCDR(ep)	(UDCDRn(ep->idx))
+
+/* Register access macros */
+#define udc_ep_readl(ep, reg)	\
+	__raw_readl((ep)->dev->regs + ofs_##reg(ep))
+#define udc_ep_writel(ep, reg, value)	\
+	__raw_writel((value), ep->dev->regs + ofs_##reg(ep))
+#define udc_ep_readb(ep, reg)	\
+	__raw_readb((ep)->dev->regs + ofs_##reg(ep))
+#define udc_ep_writeb(ep, reg, value)	\
+	__raw_writeb((value), ep->dev->regs + ofs_##reg(ep))
+#define udc_readl(dev, reg)	\
+	__raw_readl((dev)->regs + (reg))
+#define udc_writel(udc, reg, value)	\
+	__raw_writel((value), (udc)->regs + (reg))
+
+#define UDCCSR_MASK		(UDCCSR_FST | UDCCSR_DME)
+#define UDCCISR0_EP_MASK	~0
+#define UDCCISR1_EP_MASK	0xffff
+#define UDCCSR0_CTRL_REQ_MASK	(UDCCSR0_OPC | UDCCSR0_SA | UDCCSR0_RNE)
+
+#define EPIDX(ep)	(ep->idx)
+#define EPADDR(ep)	(ep->addr)
+#define EPXFERTYPE(ep)	(ep->type)
+#define EPNAME(ep)	(ep->name)
+#define is_ep0(ep)	(!ep->idx)
+#define EPXFERTYPE_is_ISO(ep) (EPXFERTYPE(ep) == USB_ENDPOINT_XFER_ISOC)
+
+/*
+ * Endpoint definitions
+ *
+ * Once enabled, pxa endpoint configuration is freezed, and cannot change
+ * unless a reset happens or the udc is disabled.
+ * Therefore, we must define all pxa potential endpoint definitions needed for
+ * all gadget and set them up before the udc is enabled.
+ *
+ * As the architecture chosen is fully static, meaning the pxa endpoint
+ * configurations are set up once and for all, we must provide a way to match
+ * one usb endpoint (usb_ep) to several pxa endpoints. The reason is that gadget
+ * layer autoconf doesn't choose the usb_ep endpoint on (config, interface, alt)
+ * criteria, while the pxa architecture requires that.
+ *
+ * The solution is to define several pxa endpoints matching one usb_ep. Ex:
+ *   - "ep1-in" matches pxa endpoint EPA (which is an IN ep at addr 1, when
+ *     the udc talks on (config=3, interface=0, alt=0)
+ *   - "ep1-in" matches pxa endpoint EPB (which is an IN ep at addr 1, when
+ *     the udc talks on (config=3, interface=0, alt=1)
+ *   - "ep1-in" matches pxa endpoint EPC (which is an IN ep at addr 1, when
+ *     the udc talks on (config=2, interface=0, alt=0)
+ *
+ * We'll define the pxa endpoint by its index (EPA => idx=1, EPB => idx=2, ...)
+ */
+
+/*
+ * Endpoint definition helpers
+ */
+#define USB_EP_DEF(addr, bname, dir, type, maxpkt, ctype, cdir) \
+{ .usb_ep = {	.name = bname, .ops = &pxa_ep_ops, .maxpacket = maxpkt, \
+		.caps = USB_EP_CAPS(ctype, cdir), }, \
+  .desc = {	.bEndpointAddress = addr | (dir ? USB_DIR_IN : 0), \
+		.bmAttributes = USB_ENDPOINT_XFER_ ## type, \
+		.wMaxPacketSize = maxpkt, }, \
+  .dev = &memory \
+}
+#define USB_EP_BULK(addr, bname, dir, cdir) \
+	USB_EP_DEF(addr, bname, dir, BULK, BULK_FIFO_SIZE, \
+		USB_EP_CAPS_TYPE_BULK, cdir)
+#define USB_EP_ISO(addr, bname, dir, cdir) \
+	USB_EP_DEF(addr, bname, dir, ISOC, ISO_FIFO_SIZE, \
+		USB_EP_CAPS_TYPE_ISO, cdir)
+#define USB_EP_INT(addr, bname, dir, cdir) \
+	USB_EP_DEF(addr, bname, dir, INT, INT_FIFO_SIZE, \
+		USB_EP_CAPS_TYPE_INT, cdir)
+#define USB_EP_IN_BULK(n)	USB_EP_BULK(n, "ep" #n "in-bulk", 1, \
+					USB_EP_CAPS_DIR_IN)
+#define USB_EP_OUT_BULK(n)	USB_EP_BULK(n, "ep" #n "out-bulk", 0, \
+					USB_EP_CAPS_DIR_OUT)
+#define USB_EP_IN_ISO(n)	USB_EP_ISO(n,  "ep" #n "in-iso", 1, \
+					USB_EP_CAPS_DIR_IN)
+#define USB_EP_OUT_ISO(n)	USB_EP_ISO(n,  "ep" #n "out-iso", 0, \
+					USB_EP_CAPS_DIR_OUT)
+#define USB_EP_IN_INT(n)	USB_EP_INT(n,  "ep" #n "in-int", 1, \
+					USB_EP_CAPS_DIR_IN)
+#define USB_EP_CTRL	USB_EP_DEF(0,  "ep0", 0, CONTROL, EP0_FIFO_SIZE, \
+				USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)
+
+#define PXA_EP_DEF(_idx, _addr, dir, _type, maxpkt, _config, iface, altset) \
+{ \
+	.dev = &memory, \
+	.name = "ep" #_idx, \
+	.idx = _idx, .enabled = 0, \
+	.dir_in = dir, .addr = _addr, \
+	.config = _config, .interface = iface, .alternate = altset, \
+	.type = _type, .fifo_size = maxpkt, \
+}
+#define PXA_EP_BULK(_idx, addr, dir, config, iface, alt) \
+  PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_BULK, BULK_FIFO_SIZE, \
+		config, iface, alt)
+#define PXA_EP_ISO(_idx, addr, dir, config, iface, alt) \
+  PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_ISOC, ISO_FIFO_SIZE, \
+		config, iface, alt)
+#define PXA_EP_INT(_idx, addr, dir, config, iface, alt) \
+  PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_INT, INT_FIFO_SIZE, \
+		config, iface, alt)
+#define PXA_EP_IN_BULK(i, adr, c, f, a)		PXA_EP_BULK(i, adr, 1, c, f, a)
+#define PXA_EP_OUT_BULK(i, adr, c, f, a)	PXA_EP_BULK(i, adr, 0, c, f, a)
+#define PXA_EP_IN_ISO(i, adr, c, f, a)		PXA_EP_ISO(i, adr, 1, c, f, a)
+#define PXA_EP_OUT_ISO(i, adr, c, f, a)		PXA_EP_ISO(i, adr, 0, c, f, a)
+#define PXA_EP_IN_INT(i, adr, c, f, a)		PXA_EP_INT(i, adr, 1, c, f, a)
+#define PXA_EP_CTRL	PXA_EP_DEF(0, 0, 0, 0, EP0_FIFO_SIZE, 0, 0, 0)
+
+struct pxa27x_udc;
+
+struct stats {
+	unsigned long in_ops;
+	unsigned long out_ops;
+	unsigned long in_bytes;
+	unsigned long out_bytes;
+	unsigned long irqs;
+};
+
+/**
+ * struct udc_usb_ep - container of each usb_ep structure
+ * @usb_ep: usb endpoint
+ * @desc: usb descriptor, especially type and address
+ * @dev: udc managing this endpoint
+ * @pxa_ep: matching pxa_ep (cache of find_pxa_ep() call)
+ */
+struct udc_usb_ep {
+	struct usb_ep usb_ep;
+	struct usb_endpoint_descriptor desc;
+	struct pxa_udc *dev;
+	struct pxa_ep *pxa_ep;
+};
+
+/**
+ * struct pxa_ep - pxa endpoint
+ * @dev: udc device
+ * @queue: requests queue
+ * @lock: lock to pxa_ep data (queues and stats)
+ * @enabled: true when endpoint enabled (not stopped by gadget layer)
+ * @in_handle_ep: number of recursions of handle_ep() function
+ * 	Prevents deadlocks or infinite recursions of types :
+ *	  irq->handle_ep()->req_done()->req.complete()->pxa_ep_queue()->handle_ep()
+ *      or
+ *        pxa_ep_queue()->handle_ep()->req_done()->req.complete()->pxa_ep_queue()
+ * @idx: endpoint index (1 => epA, 2 => epB, ..., 24 => epX)
+ * @name: endpoint name (for trace/debug purpose)
+ * @dir_in: 1 if IN endpoint, 0 if OUT endpoint
+ * @addr: usb endpoint number
+ * @config: configuration in which this endpoint is active
+ * @interface: interface in which this endpoint is active
+ * @alternate: altsetting in which this endpoint is active
+ * @fifo_size: max packet size in the endpoint fifo
+ * @type: endpoint type (bulk, iso, int, ...)
+ * @udccsr_value: save register of UDCCSR0 for suspend/resume
+ * @udccr_value: save register of UDCCR for suspend/resume
+ * @stats: endpoint statistics
+ *
+ * The *PROBLEM* is that pxa's endpoint configuration scheme is both misdesigned
+ * (cares about config/interface/altsetting, thus placing needless limits on
+ * device capability) and full of implementation bugs forcing it to be set up
+ * for use more or less like a pxa255.
+ *
+ * As we define the pxa_ep statically, we must guess all needed pxa_ep for all
+ * gadget which may work with this udc driver.
+ */
+struct pxa_ep {
+	struct pxa_udc		*dev;
+
+	struct list_head	queue;
+	spinlock_t		lock;		/* Protects this structure */
+						/* (queues, stats) */
+	unsigned		enabled:1;
+	unsigned		in_handle_ep:1;
+
+	unsigned		idx:5;
+	char			*name;
+
+	/*
+	 * Specific pxa endpoint data, needed for hardware initialization
+	 */
+	unsigned		dir_in:1;
+	unsigned		addr:4;
+	unsigned		config:2;
+	unsigned		interface:3;
+	unsigned		alternate:3;
+	unsigned		fifo_size;
+	unsigned		type;
+
+#ifdef CONFIG_PM
+	u32			udccsr_value;
+	u32			udccr_value;
+#endif
+	struct stats		stats;
+};
+
+/**
+ * struct pxa27x_request - container of each usb_request structure
+ * @req: usb request
+ * @udc_usb_ep: usb endpoint the request was submitted on
+ * @in_use: sanity check if request already queued on an pxa_ep
+ * @queue: linked list of requests, linked on pxa_ep->queue
+ */
+struct pxa27x_request {
+	struct usb_request			req;
+	struct udc_usb_ep			*udc_usb_ep;
+	unsigned				in_use:1;
+	struct list_head			queue;
+};
+
+enum ep0_state {
+	WAIT_FOR_SETUP,
+	SETUP_STAGE,
+	IN_DATA_STAGE,
+	OUT_DATA_STAGE,
+	IN_STATUS_STAGE,
+	OUT_STATUS_STAGE,
+	STALL,
+	WAIT_ACK_SET_CONF_INTERF
+};
+
+static char *ep0_state_name[] = {
+	"WAIT_FOR_SETUP", "SETUP_STAGE", "IN_DATA_STAGE", "OUT_DATA_STAGE",
+	"IN_STATUS_STAGE", "OUT_STATUS_STAGE", "STALL",
+	"WAIT_ACK_SET_CONF_INTERF"
+};
+#define EP0_STNAME(udc) ep0_state_name[(udc)->ep0state]
+
+#define EP0_FIFO_SIZE	16U
+#define BULK_FIFO_SIZE	64U
+#define ISO_FIFO_SIZE	256U
+#define INT_FIFO_SIZE	16U
+
+struct udc_stats {
+	unsigned long	irqs_reset;
+	unsigned long	irqs_suspend;
+	unsigned long	irqs_resume;
+	unsigned long	irqs_reconfig;
+};
+
+#define NR_USB_ENDPOINTS (1 + 5)	/* ep0 + ep1in-bulk + .. + ep3in-iso */
+#define NR_PXA_ENDPOINTS (1 + 14)	/* ep0 + epA + epB + .. + epX */
+
+/**
+ * struct pxa_udc - udc structure
+ * @regs: mapped IO space
+ * @irq: udc irq
+ * @clk: udc clock
+ * @usb_gadget: udc gadget structure
+ * @driver: bound gadget (zero, g_ether, g_mass_storage, ...)
+ * @dev: device
+ * @udc_command: machine specific function to activate D+ pullup
+ * @gpiod: gpio descriptor of gpio for D+ pullup (or NULL if none)
+ * @transceiver: external transceiver to handle vbus sense and D+ pullup
+ * @ep0state: control endpoint state machine state
+ * @stats: statistics on udc usage
+ * @udc_usb_ep: array of usb endpoints offered by the gadget
+ * @pxa_ep: array of pxa available endpoints
+ * @enabled: UDC was enabled by a previous udc_enable()
+ * @pullup_on: if pullup resistor connected to D+ pin
+ * @pullup_resume: if pullup resistor should be connected to D+ pin on resume
+ * @config: UDC active configuration
+ * @last_interface: UDC interface of the last SET_INTERFACE host request
+ * @last_alternate: UDC altsetting of the last SET_INTERFACE host request
+ * @udccsr0: save of udccsr0 in case of suspend
+ * @debugfs_state: debugfs entry for "udcstate"
+ * @debugfs_queues: debugfs entry for "queues"
+ * @debugfs_eps: debugfs entry for "epstate"
+ */
+struct pxa_udc {
+	void __iomem				*regs;
+	int					irq;
+	struct clk				*clk;
+
+	struct usb_gadget			gadget;
+	struct usb_gadget_driver		*driver;
+	struct device				*dev;
+	void					(*udc_command)(int);
+	struct gpio_desc			*gpiod;
+	struct usb_phy				*transceiver;
+
+	enum ep0_state				ep0state;
+	struct udc_stats			stats;
+
+	struct udc_usb_ep			udc_usb_ep[NR_USB_ENDPOINTS];
+	struct pxa_ep				pxa_ep[NR_PXA_ENDPOINTS];
+
+	unsigned				enabled:1;
+	unsigned				pullup_on:1;
+	unsigned				pullup_resume:1;
+	unsigned				vbus_sensed:1;
+	unsigned				config:2;
+	unsigned				last_interface:3;
+	unsigned				last_alternate:3;
+
+#ifdef CONFIG_PM
+	unsigned				udccsr0;
+#endif
+};
+#define to_pxa(g)	(container_of((g), struct pxa_udc, gadget))
+
+static inline struct pxa_udc *to_gadget_udc(struct usb_gadget *gadget)
+{
+	return container_of(gadget, struct pxa_udc, gadget);
+}
+
+/*
+ * Debugging/message support
+ */
+#define ep_dbg(ep, fmt, arg...) \
+	dev_dbg(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
+#define ep_vdbg(ep, fmt, arg...) \
+	dev_vdbg(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
+#define ep_err(ep, fmt, arg...) \
+	dev_err(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
+#define ep_info(ep, fmt, arg...) \
+	dev_info(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
+#define ep_warn(ep, fmt, arg...) \
+	dev_warn(ep->dev->dev, "%s:%s:" fmt, EPNAME(ep), __func__, ## arg)
+
+#endif /* __LINUX_USB_GADGET_PXA27X_H */
diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c
new file mode 100644
index 000000000..38e4d6b50
--- /dev/null
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -0,0 +1,1980 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * R8A66597 UDC (USB gadget)
+ *
+ * Copyright (C) 2006-2009 Renesas Solutions Corp.
+ *
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "r8a66597-udc.h"
+
+#define DRIVER_VERSION	"2011-09-26"
+
+static const char udc_name[] = "r8a66597_udc";
+static const char *r8a66597_ep_name[] = {
+	"ep0", "ep1", "ep2", "ep3", "ep4", "ep5", "ep6", "ep7",
+	"ep8", "ep9",
+};
+
+static void init_controller(struct r8a66597 *r8a66597);
+static void disable_controller(struct r8a66597 *r8a66597);
+static void irq_ep0_write(struct r8a66597_ep *ep, struct r8a66597_request *req);
+static void irq_packet_write(struct r8a66597_ep *ep,
+				struct r8a66597_request *req);
+static int r8a66597_queue(struct usb_ep *_ep, struct usb_request *_req,
+			gfp_t gfp_flags);
+
+static void transfer_complete(struct r8a66597_ep *ep,
+		struct r8a66597_request *req, int status);
+
+/*-------------------------------------------------------------------------*/
+static inline u16 get_usb_speed(struct r8a66597 *r8a66597)
+{
+	return r8a66597_read(r8a66597, DVSTCTR0) & RHST;
+}
+
+static void enable_pipe_irq(struct r8a66597 *r8a66597, u16 pipenum,
+		unsigned long reg)
+{
+	u16 tmp;
+
+	tmp = r8a66597_read(r8a66597, INTENB0);
+	r8a66597_bclr(r8a66597, BEMPE | NRDYE | BRDYE,
+			INTENB0);
+	r8a66597_bset(r8a66597, (1 << pipenum), reg);
+	r8a66597_write(r8a66597, tmp, INTENB0);
+}
+
+static void disable_pipe_irq(struct r8a66597 *r8a66597, u16 pipenum,
+		unsigned long reg)
+{
+	u16 tmp;
+
+	tmp = r8a66597_read(r8a66597, INTENB0);
+	r8a66597_bclr(r8a66597, BEMPE | NRDYE | BRDYE,
+			INTENB0);
+	r8a66597_bclr(r8a66597, (1 << pipenum), reg);
+	r8a66597_write(r8a66597, tmp, INTENB0);
+}
+
+static void r8a66597_usb_connect(struct r8a66597 *r8a66597)
+{
+	r8a66597_bset(r8a66597, CTRE, INTENB0);
+	r8a66597_bset(r8a66597, BEMPE | BRDYE, INTENB0);
+
+	r8a66597_bset(r8a66597, DPRPU, SYSCFG0);
+}
+
+static void r8a66597_usb_disconnect(struct r8a66597 *r8a66597)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+	r8a66597_bclr(r8a66597, CTRE, INTENB0);
+	r8a66597_bclr(r8a66597, BEMPE | BRDYE, INTENB0);
+	r8a66597_bclr(r8a66597, DPRPU, SYSCFG0);
+
+	r8a66597->gadget.speed = USB_SPEED_UNKNOWN;
+	spin_unlock(&r8a66597->lock);
+	r8a66597->driver->disconnect(&r8a66597->gadget);
+	spin_lock(&r8a66597->lock);
+
+	disable_controller(r8a66597);
+	init_controller(r8a66597);
+	r8a66597_bset(r8a66597, VBSE, INTENB0);
+	INIT_LIST_HEAD(&r8a66597->ep[0].queue);
+}
+
+static inline u16 control_reg_get_pid(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	u16 pid = 0;
+	unsigned long offset;
+
+	if (pipenum == 0) {
+		pid = r8a66597_read(r8a66597, DCPCTR) & PID;
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		pid = r8a66597_read(r8a66597, offset) & PID;
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n",
+			pipenum);
+	}
+
+	return pid;
+}
+
+static inline void control_reg_set_pid(struct r8a66597 *r8a66597, u16 pipenum,
+		u16 pid)
+{
+	unsigned long offset;
+
+	if (pipenum == 0) {
+		r8a66597_mdfy(r8a66597, pid, PID, DCPCTR);
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		r8a66597_mdfy(r8a66597, pid, PID, offset);
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n",
+			pipenum);
+	}
+}
+
+static inline void pipe_start(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	control_reg_set_pid(r8a66597, pipenum, PID_BUF);
+}
+
+static inline void pipe_stop(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	control_reg_set_pid(r8a66597, pipenum, PID_NAK);
+}
+
+static inline void pipe_stall(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	control_reg_set_pid(r8a66597, pipenum, PID_STALL);
+}
+
+static inline u16 control_reg_get(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	u16 ret = 0;
+	unsigned long offset;
+
+	if (pipenum == 0) {
+		ret = r8a66597_read(r8a66597, DCPCTR);
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		ret = r8a66597_read(r8a66597, offset);
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n",
+			pipenum);
+	}
+
+	return ret;
+}
+
+static inline void control_reg_sqclr(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	unsigned long offset;
+
+	pipe_stop(r8a66597, pipenum);
+
+	if (pipenum == 0) {
+		r8a66597_bset(r8a66597, SQCLR, DCPCTR);
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		r8a66597_bset(r8a66597, SQCLR, offset);
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n",
+			pipenum);
+	}
+}
+
+static void control_reg_sqset(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	unsigned long offset;
+
+	pipe_stop(r8a66597, pipenum);
+
+	if (pipenum == 0) {
+		r8a66597_bset(r8a66597, SQSET, DCPCTR);
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		r8a66597_bset(r8a66597, SQSET, offset);
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597),
+			"unexpect pipe num(%d)\n", pipenum);
+	}
+}
+
+static u16 control_reg_sqmon(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	unsigned long offset;
+
+	if (pipenum == 0) {
+		return r8a66597_read(r8a66597, DCPCTR) & SQMON;
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		return r8a66597_read(r8a66597, offset) & SQMON;
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597),
+			"unexpect pipe num(%d)\n", pipenum);
+	}
+
+	return 0;
+}
+
+static u16 save_usb_toggle(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	return control_reg_sqmon(r8a66597, pipenum);
+}
+
+static void restore_usb_toggle(struct r8a66597 *r8a66597, u16 pipenum,
+			       u16 toggle)
+{
+	if (toggle)
+		control_reg_sqset(r8a66597, pipenum);
+	else
+		control_reg_sqclr(r8a66597, pipenum);
+}
+
+static inline int get_buffer_size(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	u16 tmp;
+	int size;
+
+	if (pipenum == 0) {
+		tmp = r8a66597_read(r8a66597, DCPCFG);
+		if ((tmp & R8A66597_CNTMD) != 0)
+			size = 256;
+		else {
+			tmp = r8a66597_read(r8a66597, DCPMAXP);
+			size = tmp & MAXP;
+		}
+	} else {
+		r8a66597_write(r8a66597, pipenum, PIPESEL);
+		tmp = r8a66597_read(r8a66597, PIPECFG);
+		if ((tmp & R8A66597_CNTMD) != 0) {
+			tmp = r8a66597_read(r8a66597, PIPEBUF);
+			size = ((tmp >> 10) + 1) * 64;
+		} else {
+			tmp = r8a66597_read(r8a66597, PIPEMAXP);
+			size = tmp & MXPS;
+		}
+	}
+
+	return size;
+}
+
+static inline unsigned short mbw_value(struct r8a66597 *r8a66597)
+{
+	if (r8a66597->pdata->on_chip)
+		return MBW_32;
+	else
+		return MBW_16;
+}
+
+static void r8a66597_change_curpipe(struct r8a66597 *r8a66597, u16 pipenum,
+				    u16 isel, u16 fifosel)
+{
+	u16 tmp, mask, loop;
+	int i = 0;
+
+	if (!pipenum) {
+		mask = ISEL | CURPIPE;
+		loop = isel;
+	} else {
+		mask = CURPIPE;
+		loop = pipenum;
+	}
+	r8a66597_mdfy(r8a66597, loop, mask, fifosel);
+
+	do {
+		tmp = r8a66597_read(r8a66597, fifosel);
+		if (i++ > 1000000) {
+			dev_err(r8a66597_to_dev(r8a66597),
+				"r8a66597: register%x, loop %x "
+				"is timeout\n", fifosel, loop);
+			break;
+		}
+		ndelay(1);
+	} while ((tmp & mask) != loop);
+}
+
+static void pipe_change(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	struct r8a66597_ep *ep = r8a66597->pipenum2ep[pipenum];
+
+	if (ep->use_dma)
+		r8a66597_bclr(r8a66597, DREQE, ep->fifosel);
+
+	r8a66597_mdfy(r8a66597, pipenum, CURPIPE, ep->fifosel);
+
+	ndelay(450);
+
+	if (r8a66597_is_sudmac(r8a66597) && ep->use_dma)
+		r8a66597_bclr(r8a66597, mbw_value(r8a66597), ep->fifosel);
+	else
+		r8a66597_bset(r8a66597, mbw_value(r8a66597), ep->fifosel);
+
+	if (ep->use_dma)
+		r8a66597_bset(r8a66597, DREQE, ep->fifosel);
+}
+
+static int pipe_buffer_setting(struct r8a66597 *r8a66597,
+		struct r8a66597_pipe_info *info)
+{
+	u16 bufnum = 0, buf_bsize = 0;
+	u16 pipecfg = 0;
+
+	if (info->pipe == 0)
+		return -EINVAL;
+
+	r8a66597_write(r8a66597, info->pipe, PIPESEL);
+
+	if (info->dir_in)
+		pipecfg |= R8A66597_DIR;
+	pipecfg |= info->type;
+	pipecfg |= info->epnum;
+	switch (info->type) {
+	case R8A66597_INT:
+		bufnum = 4 + (info->pipe - R8A66597_BASE_PIPENUM_INT);
+		buf_bsize = 0;
+		break;
+	case R8A66597_BULK:
+		/* isochronous pipes may be used as bulk pipes */
+		if (info->pipe >= R8A66597_BASE_PIPENUM_BULK)
+			bufnum = info->pipe - R8A66597_BASE_PIPENUM_BULK;
+		else
+			bufnum = info->pipe - R8A66597_BASE_PIPENUM_ISOC;
+
+		bufnum = R8A66597_BASE_BUFNUM + (bufnum * 16);
+		buf_bsize = 7;
+		pipecfg |= R8A66597_DBLB;
+		if (!info->dir_in)
+			pipecfg |= R8A66597_SHTNAK;
+		break;
+	case R8A66597_ISO:
+		bufnum = R8A66597_BASE_BUFNUM +
+			 (info->pipe - R8A66597_BASE_PIPENUM_ISOC) * 16;
+		buf_bsize = 7;
+		break;
+	}
+
+	if (buf_bsize && ((bufnum + 16) >= R8A66597_MAX_BUFNUM)) {
+		pr_err("r8a66597 pipe memory is insufficient\n");
+		return -ENOMEM;
+	}
+
+	r8a66597_write(r8a66597, pipecfg, PIPECFG);
+	r8a66597_write(r8a66597, (buf_bsize << 10) | (bufnum), PIPEBUF);
+	r8a66597_write(r8a66597, info->maxpacket, PIPEMAXP);
+	if (info->interval)
+		info->interval--;
+	r8a66597_write(r8a66597, info->interval, PIPEPERI);
+
+	return 0;
+}
+
+static void pipe_buffer_release(struct r8a66597 *r8a66597,
+				struct r8a66597_pipe_info *info)
+{
+	if (info->pipe == 0)
+		return;
+
+	if (is_bulk_pipe(info->pipe)) {
+		r8a66597->bulk--;
+	} else if (is_interrupt_pipe(info->pipe)) {
+		r8a66597->interrupt--;
+	} else if (is_isoc_pipe(info->pipe)) {
+		r8a66597->isochronous--;
+		if (info->type == R8A66597_BULK)
+			r8a66597->bulk--;
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597),
+			"ep_release: unexpect pipenum (%d)\n", info->pipe);
+	}
+}
+
+static void pipe_initialize(struct r8a66597_ep *ep)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+
+	r8a66597_mdfy(r8a66597, 0, CURPIPE, ep->fifosel);
+
+	r8a66597_write(r8a66597, ACLRM, ep->pipectr);
+	r8a66597_write(r8a66597, 0, ep->pipectr);
+	r8a66597_write(r8a66597, SQCLR, ep->pipectr);
+	if (ep->use_dma) {
+		r8a66597_mdfy(r8a66597, ep->pipenum, CURPIPE, ep->fifosel);
+
+		ndelay(450);
+
+		r8a66597_bset(r8a66597, mbw_value(r8a66597), ep->fifosel);
+	}
+}
+
+static void r8a66597_ep_setting(struct r8a66597 *r8a66597,
+				struct r8a66597_ep *ep,
+				const struct usb_endpoint_descriptor *desc,
+				u16 pipenum, int dma)
+{
+	ep->use_dma = 0;
+	ep->fifoaddr = CFIFO;
+	ep->fifosel = CFIFOSEL;
+	ep->fifoctr = CFIFOCTR;
+
+	ep->pipectr = get_pipectr_addr(pipenum);
+	if (is_bulk_pipe(pipenum) || is_isoc_pipe(pipenum)) {
+		ep->pipetre = get_pipetre_addr(pipenum);
+		ep->pipetrn = get_pipetrn_addr(pipenum);
+	} else {
+		ep->pipetre = 0;
+		ep->pipetrn = 0;
+	}
+	ep->pipenum = pipenum;
+	ep->ep.maxpacket = usb_endpoint_maxp(desc);
+	r8a66597->pipenum2ep[pipenum] = ep;
+	r8a66597->epaddr2ep[usb_endpoint_num(desc)]
+		= ep;
+	INIT_LIST_HEAD(&ep->queue);
+}
+
+static void r8a66597_ep_release(struct r8a66597_ep *ep)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	u16 pipenum = ep->pipenum;
+
+	if (pipenum == 0)
+		return;
+
+	if (ep->use_dma)
+		r8a66597->num_dma--;
+	ep->pipenum = 0;
+	ep->busy = 0;
+	ep->use_dma = 0;
+}
+
+static int alloc_pipe_config(struct r8a66597_ep *ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	struct r8a66597_pipe_info info;
+	int dma = 0;
+	unsigned char *counter;
+	int ret;
+
+	ep->ep.desc = desc;
+
+	if (ep->pipenum)	/* already allocated pipe  */
+		return 0;
+
+	switch (usb_endpoint_type(desc)) {
+	case USB_ENDPOINT_XFER_BULK:
+		if (r8a66597->bulk >= R8A66597_MAX_NUM_BULK) {
+			if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) {
+				dev_err(r8a66597_to_dev(r8a66597),
+					"bulk pipe is insufficient\n");
+				return -ENODEV;
+			} else {
+				info.pipe = R8A66597_BASE_PIPENUM_ISOC
+						+ r8a66597->isochronous;
+				counter = &r8a66597->isochronous;
+			}
+		} else {
+			info.pipe = R8A66597_BASE_PIPENUM_BULK + r8a66597->bulk;
+			counter = &r8a66597->bulk;
+		}
+		info.type = R8A66597_BULK;
+		dma = 1;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		if (r8a66597->interrupt >= R8A66597_MAX_NUM_INT) {
+			dev_err(r8a66597_to_dev(r8a66597),
+				"interrupt pipe is insufficient\n");
+			return -ENODEV;
+		}
+		info.pipe = R8A66597_BASE_PIPENUM_INT + r8a66597->interrupt;
+		info.type = R8A66597_INT;
+		counter = &r8a66597->interrupt;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) {
+			dev_err(r8a66597_to_dev(r8a66597),
+				"isochronous pipe is insufficient\n");
+			return -ENODEV;
+		}
+		info.pipe = R8A66597_BASE_PIPENUM_ISOC + r8a66597->isochronous;
+		info.type = R8A66597_ISO;
+		counter = &r8a66597->isochronous;
+		break;
+	default:
+		dev_err(r8a66597_to_dev(r8a66597), "unexpect xfer type\n");
+		return -EINVAL;
+	}
+	ep->type = info.type;
+
+	info.epnum = usb_endpoint_num(desc);
+	info.maxpacket = usb_endpoint_maxp(desc);
+	info.interval = desc->bInterval;
+	if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+		info.dir_in = 1;
+	else
+		info.dir_in = 0;
+
+	ret = pipe_buffer_setting(r8a66597, &info);
+	if (ret < 0) {
+		dev_err(r8a66597_to_dev(r8a66597),
+			"pipe_buffer_setting fail\n");
+		return ret;
+	}
+
+	(*counter)++;
+	if ((counter == &r8a66597->isochronous) && info.type == R8A66597_BULK)
+		r8a66597->bulk++;
+
+	r8a66597_ep_setting(r8a66597, ep, desc, info.pipe, dma);
+	pipe_initialize(ep);
+
+	return 0;
+}
+
+static int free_pipe_config(struct r8a66597_ep *ep)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	struct r8a66597_pipe_info info;
+
+	info.pipe = ep->pipenum;
+	info.type = ep->type;
+	pipe_buffer_release(r8a66597, &info);
+	r8a66597_ep_release(ep);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static void pipe_irq_enable(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	enable_irq_ready(r8a66597, pipenum);
+	enable_irq_nrdy(r8a66597, pipenum);
+}
+
+static void pipe_irq_disable(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	disable_irq_ready(r8a66597, pipenum);
+	disable_irq_nrdy(r8a66597, pipenum);
+}
+
+/* if complete is true, gadget driver complete function is not call */
+static void control_end(struct r8a66597 *r8a66597, unsigned ccpl)
+{
+	r8a66597->ep[0].internal_ccpl = ccpl;
+	pipe_start(r8a66597, 0);
+	r8a66597_bset(r8a66597, CCPL, DCPCTR);
+}
+
+static void start_ep0_write(struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+
+	pipe_change(r8a66597, ep->pipenum);
+	r8a66597_mdfy(r8a66597, ISEL, (ISEL | CURPIPE), CFIFOSEL);
+	r8a66597_write(r8a66597, BCLR, ep->fifoctr);
+	if (req->req.length == 0) {
+		r8a66597_bset(r8a66597, BVAL, ep->fifoctr);
+		pipe_start(r8a66597, 0);
+		transfer_complete(ep, req, 0);
+	} else {
+		r8a66597_write(r8a66597, ~BEMP0, BEMPSTS);
+		irq_ep0_write(ep, req);
+	}
+}
+
+static void disable_fifosel(struct r8a66597 *r8a66597, u16 pipenum,
+			    u16 fifosel)
+{
+	u16 tmp;
+
+	tmp = r8a66597_read(r8a66597, fifosel) & CURPIPE;
+	if (tmp == pipenum)
+		r8a66597_change_curpipe(r8a66597, 0, 0, fifosel);
+}
+
+static void change_bfre_mode(struct r8a66597 *r8a66597, u16 pipenum,
+			     int enable)
+{
+	struct r8a66597_ep *ep = r8a66597->pipenum2ep[pipenum];
+	u16 tmp, toggle;
+
+	/* check current BFRE bit */
+	r8a66597_write(r8a66597, pipenum, PIPESEL);
+	tmp = r8a66597_read(r8a66597, PIPECFG) & R8A66597_BFRE;
+	if ((enable && tmp) || (!enable && !tmp))
+		return;
+
+	/* change BFRE bit */
+	pipe_stop(r8a66597, pipenum);
+	disable_fifosel(r8a66597, pipenum, CFIFOSEL);
+	disable_fifosel(r8a66597, pipenum, D0FIFOSEL);
+	disable_fifosel(r8a66597, pipenum, D1FIFOSEL);
+
+	toggle = save_usb_toggle(r8a66597, pipenum);
+
+	r8a66597_write(r8a66597, pipenum, PIPESEL);
+	if (enable)
+		r8a66597_bset(r8a66597, R8A66597_BFRE, PIPECFG);
+	else
+		r8a66597_bclr(r8a66597, R8A66597_BFRE, PIPECFG);
+
+	/* initialize for internal BFRE flag */
+	r8a66597_bset(r8a66597, ACLRM, ep->pipectr);
+	r8a66597_bclr(r8a66597, ACLRM, ep->pipectr);
+
+	restore_usb_toggle(r8a66597, pipenum, toggle);
+}
+
+static int sudmac_alloc_channel(struct r8a66597 *r8a66597,
+				struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	struct r8a66597_dma *dma;
+
+	if (!r8a66597_is_sudmac(r8a66597))
+		return -ENODEV;
+
+	/* Check transfer type */
+	if (!is_bulk_pipe(ep->pipenum))
+		return -EIO;
+
+	if (r8a66597->dma.used)
+		return -EBUSY;
+
+	/* set SUDMAC parameters */
+	dma = &r8a66597->dma;
+	dma->used = 1;
+	if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) {
+		dma->dir = 1;
+	} else {
+		dma->dir = 0;
+		change_bfre_mode(r8a66597, ep->pipenum, 1);
+	}
+
+	/* set r8a66597_ep paramters */
+	ep->use_dma = 1;
+	ep->dma = dma;
+	ep->fifoaddr = D0FIFO;
+	ep->fifosel = D0FIFOSEL;
+	ep->fifoctr = D0FIFOCTR;
+
+	/* dma mapping */
+	return usb_gadget_map_request(&r8a66597->gadget, &req->req, dma->dir);
+}
+
+static void sudmac_free_channel(struct r8a66597 *r8a66597,
+				struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	if (!r8a66597_is_sudmac(r8a66597))
+		return;
+
+	usb_gadget_unmap_request(&r8a66597->gadget, &req->req, ep->dma->dir);
+
+	r8a66597_bclr(r8a66597, DREQE, ep->fifosel);
+	r8a66597_change_curpipe(r8a66597, 0, 0, ep->fifosel);
+
+	ep->dma->used = 0;
+	ep->use_dma = 0;
+	ep->fifoaddr = CFIFO;
+	ep->fifosel = CFIFOSEL;
+	ep->fifoctr = CFIFOCTR;
+}
+
+static void sudmac_start(struct r8a66597 *r8a66597, struct r8a66597_ep *ep,
+			 struct r8a66597_request *req)
+{
+	BUG_ON(req->req.length == 0);
+
+	r8a66597_sudmac_write(r8a66597, LBA_WAIT, CH0CFG);
+	r8a66597_sudmac_write(r8a66597, req->req.dma, CH0BA);
+	r8a66597_sudmac_write(r8a66597, req->req.length, CH0BBC);
+	r8a66597_sudmac_write(r8a66597, CH0ENDE, DINTCTRL);
+
+	r8a66597_sudmac_write(r8a66597, DEN, CH0DEN);
+}
+
+static void start_packet_write(struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	u16 tmp;
+
+	pipe_change(r8a66597, ep->pipenum);
+	disable_irq_empty(r8a66597, ep->pipenum);
+	pipe_start(r8a66597, ep->pipenum);
+
+	if (req->req.length == 0) {
+		transfer_complete(ep, req, 0);
+	} else {
+		r8a66597_write(r8a66597, ~(1 << ep->pipenum), BRDYSTS);
+		if (sudmac_alloc_channel(r8a66597, ep, req) < 0) {
+			/* PIO mode */
+			pipe_change(r8a66597, ep->pipenum);
+			disable_irq_empty(r8a66597, ep->pipenum);
+			pipe_start(r8a66597, ep->pipenum);
+			tmp = r8a66597_read(r8a66597, ep->fifoctr);
+			if (unlikely((tmp & FRDY) == 0))
+				pipe_irq_enable(r8a66597, ep->pipenum);
+			else
+				irq_packet_write(ep, req);
+		} else {
+			/* DMA mode */
+			pipe_change(r8a66597, ep->pipenum);
+			disable_irq_nrdy(r8a66597, ep->pipenum);
+			pipe_start(r8a66597, ep->pipenum);
+			enable_irq_nrdy(r8a66597, ep->pipenum);
+			sudmac_start(r8a66597, ep, req);
+		}
+	}
+}
+
+static void start_packet_read(struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	u16 pipenum = ep->pipenum;
+
+	if (ep->pipenum == 0) {
+		r8a66597_mdfy(r8a66597, 0, (ISEL | CURPIPE), CFIFOSEL);
+		r8a66597_write(r8a66597, BCLR, ep->fifoctr);
+		pipe_start(r8a66597, pipenum);
+		pipe_irq_enable(r8a66597, pipenum);
+	} else {
+		pipe_stop(r8a66597, pipenum);
+		if (ep->pipetre) {
+			enable_irq_nrdy(r8a66597, pipenum);
+			r8a66597_write(r8a66597, TRCLR, ep->pipetre);
+			r8a66597_write(r8a66597,
+				DIV_ROUND_UP(req->req.length, ep->ep.maxpacket),
+				ep->pipetrn);
+			r8a66597_bset(r8a66597, TRENB, ep->pipetre);
+		}
+
+		if (sudmac_alloc_channel(r8a66597, ep, req) < 0) {
+			/* PIO mode */
+			change_bfre_mode(r8a66597, ep->pipenum, 0);
+			pipe_start(r8a66597, pipenum);	/* trigger once */
+			pipe_irq_enable(r8a66597, pipenum);
+		} else {
+			pipe_change(r8a66597, pipenum);
+			sudmac_start(r8a66597, ep, req);
+			pipe_start(r8a66597, pipenum);	/* trigger once */
+		}
+	}
+}
+
+static void start_packet(struct r8a66597_ep *ep, struct r8a66597_request *req)
+{
+	if (ep->ep.desc->bEndpointAddress & USB_DIR_IN)
+		start_packet_write(ep, req);
+	else
+		start_packet_read(ep, req);
+}
+
+static void start_ep0(struct r8a66597_ep *ep, struct r8a66597_request *req)
+{
+	u16 ctsq;
+
+	ctsq = r8a66597_read(ep->r8a66597, INTSTS0) & CTSQ;
+
+	switch (ctsq) {
+	case CS_RDDS:
+		start_ep0_write(ep, req);
+		break;
+	case CS_WRDS:
+		start_packet_read(ep, req);
+		break;
+
+	case CS_WRND:
+		control_end(ep->r8a66597, 0);
+		break;
+	default:
+		dev_err(r8a66597_to_dev(ep->r8a66597),
+			"start_ep0: unexpect ctsq(%x)\n", ctsq);
+		break;
+	}
+}
+
+static void init_controller(struct r8a66597 *r8a66597)
+{
+	u16 vif = r8a66597->pdata->vif ? LDRV : 0;
+	u16 irq_sense = r8a66597->irq_sense_low ? INTL : 0;
+	u16 endian = r8a66597->pdata->endian ? BIGEND : 0;
+
+	if (r8a66597->pdata->on_chip) {
+		if (r8a66597->pdata->buswait)
+			r8a66597_write(r8a66597, r8a66597->pdata->buswait,
+					SYSCFG1);
+		else
+			r8a66597_write(r8a66597, 0x0f, SYSCFG1);
+		r8a66597_bset(r8a66597, HSE, SYSCFG0);
+
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+		r8a66597_bclr(r8a66597, DPRPU, SYSCFG0);
+		r8a66597_bset(r8a66597, USBE, SYSCFG0);
+
+		r8a66597_bset(r8a66597, SCKE, SYSCFG0);
+
+		r8a66597_bset(r8a66597, irq_sense, INTENB1);
+		r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR,
+				DMA0CFG);
+	} else {
+		r8a66597_bset(r8a66597, vif | endian, PINCFG);
+		r8a66597_bset(r8a66597, HSE, SYSCFG0);		/* High spd */
+		r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata),
+				XTAL, SYSCFG0);
+
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+		r8a66597_bclr(r8a66597, DPRPU, SYSCFG0);
+		r8a66597_bset(r8a66597, USBE, SYSCFG0);
+
+		r8a66597_bset(r8a66597, XCKE, SYSCFG0);
+
+		mdelay(3);
+
+		r8a66597_bset(r8a66597, PLLC, SYSCFG0);
+
+		mdelay(1);
+
+		r8a66597_bset(r8a66597, SCKE, SYSCFG0);
+
+		r8a66597_bset(r8a66597, irq_sense, INTENB1);
+		r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR,
+			       DMA0CFG);
+	}
+}
+
+static void disable_controller(struct r8a66597 *r8a66597)
+{
+	if (r8a66597->pdata->on_chip) {
+		r8a66597_bset(r8a66597, SCKE, SYSCFG0);
+		r8a66597_bclr(r8a66597, UTST, TESTMODE);
+
+		/* disable interrupts */
+		r8a66597_write(r8a66597, 0, INTENB0);
+		r8a66597_write(r8a66597, 0, INTENB1);
+		r8a66597_write(r8a66597, 0, BRDYENB);
+		r8a66597_write(r8a66597, 0, BEMPENB);
+		r8a66597_write(r8a66597, 0, NRDYENB);
+
+		/* clear status */
+		r8a66597_write(r8a66597, 0, BRDYSTS);
+		r8a66597_write(r8a66597, 0, NRDYSTS);
+		r8a66597_write(r8a66597, 0, BEMPSTS);
+
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+		r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
+
+	} else {
+		r8a66597_bclr(r8a66597, UTST, TESTMODE);
+		r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
+		udelay(1);
+		r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
+		udelay(1);
+		udelay(1);
+		r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
+	}
+}
+
+static void r8a66597_start_xclock(struct r8a66597 *r8a66597)
+{
+	u16 tmp;
+
+	if (!r8a66597->pdata->on_chip) {
+		tmp = r8a66597_read(r8a66597, SYSCFG0);
+		if (!(tmp & XCKE))
+			r8a66597_bset(r8a66597, XCKE, SYSCFG0);
+	}
+}
+
+static struct r8a66597_request *get_request_from_ep(struct r8a66597_ep *ep)
+{
+	return list_entry(ep->queue.next, struct r8a66597_request, queue);
+}
+
+/*-------------------------------------------------------------------------*/
+static void transfer_complete(struct r8a66597_ep *ep,
+		struct r8a66597_request *req, int status)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+	int restart = 0;
+
+	if (unlikely(ep->pipenum == 0)) {
+		if (ep->internal_ccpl) {
+			ep->internal_ccpl = 0;
+			return;
+		}
+	}
+
+	list_del_init(&req->queue);
+	if (ep->r8a66597->gadget.speed == USB_SPEED_UNKNOWN)
+		req->req.status = -ESHUTDOWN;
+	else
+		req->req.status = status;
+
+	if (!list_empty(&ep->queue))
+		restart = 1;
+
+	if (ep->use_dma)
+		sudmac_free_channel(ep->r8a66597, ep, req);
+
+	spin_unlock(&ep->r8a66597->lock);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&ep->r8a66597->lock);
+
+	if (restart) {
+		req = get_request_from_ep(ep);
+		if (ep->ep.desc)
+			start_packet(ep, req);
+	}
+}
+
+static void irq_ep0_write(struct r8a66597_ep *ep, struct r8a66597_request *req)
+{
+	int i;
+	u16 tmp;
+	unsigned bufsize;
+	size_t size;
+	void *buf;
+	u16 pipenum = ep->pipenum;
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+
+	pipe_change(r8a66597, pipenum);
+	r8a66597_bset(r8a66597, ISEL, ep->fifosel);
+
+	i = 0;
+	do {
+		tmp = r8a66597_read(r8a66597, ep->fifoctr);
+		if (i++ > 100000) {
+			dev_err(r8a66597_to_dev(r8a66597),
+				"pipe0 is busy. maybe cpu i/o bus "
+				"conflict. please power off this controller.");
+			return;
+		}
+		ndelay(1);
+	} while ((tmp & FRDY) == 0);
+
+	/* prepare parameters */
+	bufsize = get_buffer_size(r8a66597, pipenum);
+	buf = req->req.buf + req->req.actual;
+	size = min(bufsize, req->req.length - req->req.actual);
+
+	/* write fifo */
+	if (req->req.buf) {
+		if (size > 0)
+			r8a66597_write_fifo(r8a66597, ep, buf, size);
+		if ((size == 0) || ((size % ep->ep.maxpacket) != 0))
+			r8a66597_bset(r8a66597, BVAL, ep->fifoctr);
+	}
+
+	/* update parameters */
+	req->req.actual += size;
+
+	/* check transfer finish */
+	if ((!req->req.zero && (req->req.actual == req->req.length))
+			|| (size % ep->ep.maxpacket)
+			|| (size == 0)) {
+		disable_irq_ready(r8a66597, pipenum);
+		disable_irq_empty(r8a66597, pipenum);
+	} else {
+		disable_irq_ready(r8a66597, pipenum);
+		enable_irq_empty(r8a66597, pipenum);
+	}
+	pipe_start(r8a66597, pipenum);
+}
+
+static void irq_packet_write(struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	u16 tmp;
+	unsigned bufsize;
+	size_t size;
+	void *buf;
+	u16 pipenum = ep->pipenum;
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+
+	pipe_change(r8a66597, pipenum);
+	tmp = r8a66597_read(r8a66597, ep->fifoctr);
+	if (unlikely((tmp & FRDY) == 0)) {
+		pipe_stop(r8a66597, pipenum);
+		pipe_irq_disable(r8a66597, pipenum);
+		dev_err(r8a66597_to_dev(r8a66597),
+			"write fifo not ready. pipnum=%d\n", pipenum);
+		return;
+	}
+
+	/* prepare parameters */
+	bufsize = get_buffer_size(r8a66597, pipenum);
+	buf = req->req.buf + req->req.actual;
+	size = min(bufsize, req->req.length - req->req.actual);
+
+	/* write fifo */
+	if (req->req.buf) {
+		r8a66597_write_fifo(r8a66597, ep, buf, size);
+		if ((size == 0)
+				|| ((size % ep->ep.maxpacket) != 0)
+				|| ((bufsize != ep->ep.maxpacket)
+					&& (bufsize > size)))
+			r8a66597_bset(r8a66597, BVAL, ep->fifoctr);
+	}
+
+	/* update parameters */
+	req->req.actual += size;
+	/* check transfer finish */
+	if ((!req->req.zero && (req->req.actual == req->req.length))
+			|| (size % ep->ep.maxpacket)
+			|| (size == 0)) {
+		disable_irq_ready(r8a66597, pipenum);
+		enable_irq_empty(r8a66597, pipenum);
+	} else {
+		disable_irq_empty(r8a66597, pipenum);
+		pipe_irq_enable(r8a66597, pipenum);
+	}
+}
+
+static void irq_packet_read(struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	u16 tmp;
+	int rcv_len, bufsize, req_len;
+	int size;
+	void *buf;
+	u16 pipenum = ep->pipenum;
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	int finish = 0;
+
+	pipe_change(r8a66597, pipenum);
+	tmp = r8a66597_read(r8a66597, ep->fifoctr);
+	if (unlikely((tmp & FRDY) == 0)) {
+		req->req.status = -EPIPE;
+		pipe_stop(r8a66597, pipenum);
+		pipe_irq_disable(r8a66597, pipenum);
+		dev_err(r8a66597_to_dev(r8a66597), "read fifo not ready");
+		return;
+	}
+
+	/* prepare parameters */
+	rcv_len = tmp & DTLN;
+	bufsize = get_buffer_size(r8a66597, pipenum);
+
+	buf = req->req.buf + req->req.actual;
+	req_len = req->req.length - req->req.actual;
+	if (rcv_len < bufsize)
+		size = min(rcv_len, req_len);
+	else
+		size = min(bufsize, req_len);
+
+	/* update parameters */
+	req->req.actual += size;
+
+	/* check transfer finish */
+	if ((!req->req.zero && (req->req.actual == req->req.length))
+			|| (size % ep->ep.maxpacket)
+			|| (size == 0)) {
+		pipe_stop(r8a66597, pipenum);
+		pipe_irq_disable(r8a66597, pipenum);
+		finish = 1;
+	}
+
+	/* read fifo */
+	if (req->req.buf) {
+		if (size == 0)
+			r8a66597_write(r8a66597, BCLR, ep->fifoctr);
+		else
+			r8a66597_read_fifo(r8a66597, ep->fifoaddr, buf, size);
+
+	}
+
+	if ((ep->pipenum != 0) && finish)
+		transfer_complete(ep, req, 0);
+}
+
+static void irq_pipe_ready(struct r8a66597 *r8a66597, u16 status, u16 enb)
+{
+	u16 check;
+	u16 pipenum;
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+
+	if ((status & BRDY0) && (enb & BRDY0)) {
+		r8a66597_write(r8a66597, ~BRDY0, BRDYSTS);
+		r8a66597_mdfy(r8a66597, 0, CURPIPE, CFIFOSEL);
+
+		ep = &r8a66597->ep[0];
+		req = get_request_from_ep(ep);
+		irq_packet_read(ep, req);
+	} else {
+		for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
+			check = 1 << pipenum;
+			if ((status & check) && (enb & check)) {
+				r8a66597_write(r8a66597, ~check, BRDYSTS);
+				ep = r8a66597->pipenum2ep[pipenum];
+				req = get_request_from_ep(ep);
+				if (ep->ep.desc->bEndpointAddress & USB_DIR_IN)
+					irq_packet_write(ep, req);
+				else
+					irq_packet_read(ep, req);
+			}
+		}
+	}
+}
+
+static void irq_pipe_empty(struct r8a66597 *r8a66597, u16 status, u16 enb)
+{
+	u16 tmp;
+	u16 check;
+	u16 pipenum;
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+
+	if ((status & BEMP0) && (enb & BEMP0)) {
+		r8a66597_write(r8a66597, ~BEMP0, BEMPSTS);
+
+		ep = &r8a66597->ep[0];
+		req = get_request_from_ep(ep);
+		irq_ep0_write(ep, req);
+	} else {
+		for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
+			check = 1 << pipenum;
+			if ((status & check) && (enb & check)) {
+				r8a66597_write(r8a66597, ~check, BEMPSTS);
+				tmp = control_reg_get(r8a66597, pipenum);
+				if ((tmp & INBUFM) == 0) {
+					disable_irq_empty(r8a66597, pipenum);
+					pipe_irq_disable(r8a66597, pipenum);
+					pipe_stop(r8a66597, pipenum);
+					ep = r8a66597->pipenum2ep[pipenum];
+					req = get_request_from_ep(ep);
+					if (!list_empty(&ep->queue))
+						transfer_complete(ep, req, 0);
+				}
+			}
+		}
+	}
+}
+
+static void get_status(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+	struct r8a66597_ep *ep;
+	u16 pid;
+	u16 status = 0;
+	u16 w_index = le16_to_cpu(ctrl->wIndex);
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		status = r8a66597->device_status;
+		break;
+	case USB_RECIP_INTERFACE:
+		status = 0;
+		break;
+	case USB_RECIP_ENDPOINT:
+		ep = r8a66597->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK];
+		pid = control_reg_get_pid(r8a66597, ep->pipenum);
+		if (pid == PID_STALL)
+			status = 1 << USB_ENDPOINT_HALT;
+		else
+			status = 0;
+		break;
+	default:
+		pipe_stall(r8a66597, 0);
+		return;		/* exit */
+	}
+
+	r8a66597->ep0_data = cpu_to_le16(status);
+	r8a66597->ep0_req->buf = &r8a66597->ep0_data;
+	r8a66597->ep0_req->length = 2;
+	/* AV: what happens if we get called again before that gets through? */
+	spin_unlock(&r8a66597->lock);
+	r8a66597_queue(r8a66597->gadget.ep0, r8a66597->ep0_req, GFP_ATOMIC);
+	spin_lock(&r8a66597->lock);
+}
+
+static void clear_feature(struct r8a66597 *r8a66597,
+				struct usb_ctrlrequest *ctrl)
+{
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		control_end(r8a66597, 1);
+		break;
+	case USB_RECIP_INTERFACE:
+		control_end(r8a66597, 1);
+		break;
+	case USB_RECIP_ENDPOINT: {
+		struct r8a66597_ep *ep;
+		struct r8a66597_request *req;
+		u16 w_index = le16_to_cpu(ctrl->wIndex);
+
+		ep = r8a66597->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK];
+		if (!ep->wedge) {
+			pipe_stop(r8a66597, ep->pipenum);
+			control_reg_sqclr(r8a66597, ep->pipenum);
+			spin_unlock(&r8a66597->lock);
+			usb_ep_clear_halt(&ep->ep);
+			spin_lock(&r8a66597->lock);
+		}
+
+		control_end(r8a66597, 1);
+
+		req = get_request_from_ep(ep);
+		if (ep->busy) {
+			ep->busy = 0;
+			if (list_empty(&ep->queue))
+				break;
+			start_packet(ep, req);
+		} else if (!list_empty(&ep->queue))
+			pipe_start(r8a66597, ep->pipenum);
+		}
+		break;
+	default:
+		pipe_stall(r8a66597, 0);
+		break;
+	}
+}
+
+static void set_feature(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl)
+{
+	u16 tmp;
+	int timeout = 3000;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		switch (le16_to_cpu(ctrl->wValue)) {
+		case USB_DEVICE_TEST_MODE:
+			control_end(r8a66597, 1);
+			/* Wait for the completion of status stage */
+			do {
+				tmp = r8a66597_read(r8a66597, INTSTS0) & CTSQ;
+				udelay(1);
+			} while (tmp != CS_IDST && timeout-- > 0);
+
+			if (tmp == CS_IDST)
+				r8a66597_bset(r8a66597,
+					      le16_to_cpu(ctrl->wIndex >> 8),
+					      TESTMODE);
+			break;
+		default:
+			pipe_stall(r8a66597, 0);
+			break;
+		}
+		break;
+	case USB_RECIP_INTERFACE:
+		control_end(r8a66597, 1);
+		break;
+	case USB_RECIP_ENDPOINT: {
+		struct r8a66597_ep *ep;
+		u16 w_index = le16_to_cpu(ctrl->wIndex);
+
+		ep = r8a66597->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK];
+		pipe_stall(r8a66597, ep->pipenum);
+
+		control_end(r8a66597, 1);
+		}
+		break;
+	default:
+		pipe_stall(r8a66597, 0);
+		break;
+	}
+}
+
+/* if return value is true, call class driver's setup() */
+static int setup_packet(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl)
+{
+	u16 *p = (u16 *)ctrl;
+	unsigned long offset = USBREQ;
+	int i, ret = 0;
+
+	/* read fifo */
+	r8a66597_write(r8a66597, ~VALID, INTSTS0);
+
+	for (i = 0; i < 4; i++)
+		p[i] = r8a66597_read(r8a66597, offset + i*2);
+
+	/* check request */
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (ctrl->bRequest) {
+		case USB_REQ_GET_STATUS:
+			get_status(r8a66597, ctrl);
+			break;
+		case USB_REQ_CLEAR_FEATURE:
+			clear_feature(r8a66597, ctrl);
+			break;
+		case USB_REQ_SET_FEATURE:
+			set_feature(r8a66597, ctrl);
+			break;
+		default:
+			ret = 1;
+			break;
+		}
+	} else
+		ret = 1;
+	return ret;
+}
+
+static void r8a66597_update_usb_speed(struct r8a66597 *r8a66597)
+{
+	u16 speed = get_usb_speed(r8a66597);
+
+	switch (speed) {
+	case HSMODE:
+		r8a66597->gadget.speed = USB_SPEED_HIGH;
+		break;
+	case FSMODE:
+		r8a66597->gadget.speed = USB_SPEED_FULL;
+		break;
+	default:
+		r8a66597->gadget.speed = USB_SPEED_UNKNOWN;
+		dev_err(r8a66597_to_dev(r8a66597), "USB speed unknown\n");
+	}
+}
+
+static void irq_device_state(struct r8a66597 *r8a66597)
+{
+	u16 dvsq;
+
+	dvsq = r8a66597_read(r8a66597, INTSTS0) & DVSQ;
+	r8a66597_write(r8a66597, ~DVST, INTSTS0);
+
+	if (dvsq == DS_DFLT) {
+		/* bus reset */
+		spin_unlock(&r8a66597->lock);
+		usb_gadget_udc_reset(&r8a66597->gadget, r8a66597->driver);
+		spin_lock(&r8a66597->lock);
+		r8a66597_update_usb_speed(r8a66597);
+	}
+	if (r8a66597->old_dvsq == DS_CNFG && dvsq != DS_CNFG)
+		r8a66597_update_usb_speed(r8a66597);
+	if ((dvsq == DS_CNFG || dvsq == DS_ADDS)
+			&& r8a66597->gadget.speed == USB_SPEED_UNKNOWN)
+		r8a66597_update_usb_speed(r8a66597);
+
+	r8a66597->old_dvsq = dvsq;
+}
+
+static void irq_control_stage(struct r8a66597 *r8a66597)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+	struct usb_ctrlrequest ctrl;
+	u16 ctsq;
+
+	ctsq = r8a66597_read(r8a66597, INTSTS0) & CTSQ;
+	r8a66597_write(r8a66597, ~CTRT, INTSTS0);
+
+	switch (ctsq) {
+	case CS_IDST: {
+		struct r8a66597_ep *ep;
+		struct r8a66597_request *req;
+		ep = &r8a66597->ep[0];
+		req = get_request_from_ep(ep);
+		transfer_complete(ep, req, 0);
+		}
+		break;
+
+	case CS_RDDS:
+	case CS_WRDS:
+	case CS_WRND:
+		if (setup_packet(r8a66597, &ctrl)) {
+			spin_unlock(&r8a66597->lock);
+			if (r8a66597->driver->setup(&r8a66597->gadget, &ctrl)
+				< 0)
+				pipe_stall(r8a66597, 0);
+			spin_lock(&r8a66597->lock);
+		}
+		break;
+	case CS_RDSS:
+	case CS_WRSS:
+		control_end(r8a66597, 0);
+		break;
+	default:
+		dev_err(r8a66597_to_dev(r8a66597),
+			"ctrl_stage: unexpect ctsq(%x)\n", ctsq);
+		break;
+	}
+}
+
+static void sudmac_finish(struct r8a66597 *r8a66597, struct r8a66597_ep *ep)
+{
+	u16 pipenum;
+	struct r8a66597_request *req;
+	u32 len;
+	int i = 0;
+
+	pipenum = ep->pipenum;
+	pipe_change(r8a66597, pipenum);
+
+	while (!(r8a66597_read(r8a66597, ep->fifoctr) & FRDY)) {
+		udelay(1);
+		if (unlikely(i++ >= 10000)) {	/* timeout = 10 msec */
+			dev_err(r8a66597_to_dev(r8a66597),
+				"%s: FRDY was not set (%d)\n",
+				__func__, pipenum);
+			return;
+		}
+	}
+
+	r8a66597_bset(r8a66597, BCLR, ep->fifoctr);
+	req = get_request_from_ep(ep);
+
+	/* prepare parameters */
+	len = r8a66597_sudmac_read(r8a66597, CH0CBC);
+	req->req.actual += len;
+
+	/* clear */
+	r8a66597_sudmac_write(r8a66597, CH0STCLR, DSTSCLR);
+
+	/* check transfer finish */
+	if ((!req->req.zero && (req->req.actual == req->req.length))
+			|| (len % ep->ep.maxpacket)) {
+		if (ep->dma->dir) {
+			disable_irq_ready(r8a66597, pipenum);
+			enable_irq_empty(r8a66597, pipenum);
+		} else {
+			/* Clear the interrupt flag for next transfer */
+			r8a66597_write(r8a66597, ~(1 << pipenum), BRDYSTS);
+			transfer_complete(ep, req, 0);
+		}
+	}
+}
+
+static void r8a66597_sudmac_irq(struct r8a66597 *r8a66597)
+{
+	u32 irqsts;
+	struct r8a66597_ep *ep;
+	u16 pipenum;
+
+	irqsts = r8a66597_sudmac_read(r8a66597, DINTSTS);
+	if (irqsts & CH0ENDS) {
+		r8a66597_sudmac_write(r8a66597, CH0ENDC, DINTSTSCLR);
+		pipenum = (r8a66597_read(r8a66597, D0FIFOSEL) & CURPIPE);
+		ep = r8a66597->pipenum2ep[pipenum];
+		sudmac_finish(r8a66597, ep);
+	}
+}
+
+static irqreturn_t r8a66597_irq(int irq, void *_r8a66597)
+{
+	struct r8a66597 *r8a66597 = _r8a66597;
+	u16 intsts0;
+	u16 intenb0;
+	u16 savepipe;
+	u16 mask0;
+
+	spin_lock(&r8a66597->lock);
+
+	if (r8a66597_is_sudmac(r8a66597))
+		r8a66597_sudmac_irq(r8a66597);
+
+	intsts0 = r8a66597_read(r8a66597, INTSTS0);
+	intenb0 = r8a66597_read(r8a66597, INTENB0);
+
+	savepipe = r8a66597_read(r8a66597, CFIFOSEL);
+
+	mask0 = intsts0 & intenb0;
+	if (mask0) {
+		u16 brdysts = r8a66597_read(r8a66597, BRDYSTS);
+		u16 bempsts = r8a66597_read(r8a66597, BEMPSTS);
+		u16 brdyenb = r8a66597_read(r8a66597, BRDYENB);
+		u16 bempenb = r8a66597_read(r8a66597, BEMPENB);
+
+		if (mask0 & VBINT) {
+			r8a66597_write(r8a66597,  0xffff & ~VBINT,
+					INTSTS0);
+			r8a66597_start_xclock(r8a66597);
+
+			/* start vbus sampling */
+			r8a66597->old_vbus = r8a66597_read(r8a66597, INTSTS0)
+					& VBSTS;
+			r8a66597->scount = R8A66597_MAX_SAMPLING;
+
+			mod_timer(&r8a66597->timer,
+					jiffies + msecs_to_jiffies(50));
+		}
+		if (intsts0 & DVSQ)
+			irq_device_state(r8a66597);
+
+		if ((intsts0 & BRDY) && (intenb0 & BRDYE)
+				&& (brdysts & brdyenb))
+			irq_pipe_ready(r8a66597, brdysts, brdyenb);
+		if ((intsts0 & BEMP) && (intenb0 & BEMPE)
+				&& (bempsts & bempenb))
+			irq_pipe_empty(r8a66597, bempsts, bempenb);
+
+		if (intsts0 & CTRT)
+			irq_control_stage(r8a66597);
+	}
+
+	r8a66597_write(r8a66597, savepipe, CFIFOSEL);
+
+	spin_unlock(&r8a66597->lock);
+	return IRQ_HANDLED;
+}
+
+static void r8a66597_timer(struct timer_list *t)
+{
+	struct r8a66597 *r8a66597 = from_timer(r8a66597, t, timer);
+	unsigned long flags;
+	u16 tmp;
+
+	spin_lock_irqsave(&r8a66597->lock, flags);
+	tmp = r8a66597_read(r8a66597, SYSCFG0);
+	if (r8a66597->scount > 0) {
+		tmp = r8a66597_read(r8a66597, INTSTS0) & VBSTS;
+		if (tmp == r8a66597->old_vbus) {
+			r8a66597->scount--;
+			if (r8a66597->scount == 0) {
+				if (tmp == VBSTS)
+					r8a66597_usb_connect(r8a66597);
+				else
+					r8a66597_usb_disconnect(r8a66597);
+			} else {
+				mod_timer(&r8a66597->timer,
+					jiffies + msecs_to_jiffies(50));
+			}
+		} else {
+			r8a66597->scount = R8A66597_MAX_SAMPLING;
+			r8a66597->old_vbus = tmp;
+			mod_timer(&r8a66597->timer,
+					jiffies + msecs_to_jiffies(50));
+		}
+	}
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
+}
+
+/*-------------------------------------------------------------------------*/
+static int r8a66597_enable(struct usb_ep *_ep,
+			 const struct usb_endpoint_descriptor *desc)
+{
+	struct r8a66597_ep *ep;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	return alloc_pipe_config(ep, desc);
+}
+
+static int r8a66597_disable(struct usb_ep *_ep)
+{
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	BUG_ON(!ep);
+
+	while (!list_empty(&ep->queue)) {
+		req = get_request_from_ep(ep);
+		spin_lock_irqsave(&ep->r8a66597->lock, flags);
+		transfer_complete(ep, req, -ECONNRESET);
+		spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+	}
+
+	pipe_irq_disable(ep->r8a66597, ep->pipenum);
+	return free_pipe_config(ep);
+}
+
+static struct usb_request *r8a66597_alloc_request(struct usb_ep *_ep,
+						gfp_t gfp_flags)
+{
+	struct r8a66597_request *req;
+
+	req = kzalloc(sizeof(struct r8a66597_request), gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void r8a66597_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct r8a66597_request *req;
+
+	req = container_of(_req, struct r8a66597_request, req);
+	kfree(req);
+}
+
+static int r8a66597_queue(struct usb_ep *_ep, struct usb_request *_req,
+			gfp_t gfp_flags)
+{
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+	unsigned long flags;
+	int request = 0;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	req = container_of(_req, struct r8a66597_request, req);
+
+	if (ep->r8a66597->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&ep->r8a66597->lock, flags);
+
+	if (list_empty(&ep->queue))
+		request = 1;
+
+	list_add_tail(&req->queue, &ep->queue);
+	req->req.actual = 0;
+	req->req.status = -EINPROGRESS;
+
+	if (ep->ep.desc == NULL)	/* control */
+		start_ep0(ep, req);
+	else {
+		if (request && !ep->busy)
+			start_packet(ep, req);
+	}
+
+	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+
+	return 0;
+}
+
+static int r8a66597_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	req = container_of(_req, struct r8a66597_request, req);
+
+	spin_lock_irqsave(&ep->r8a66597->lock, flags);
+	if (!list_empty(&ep->queue))
+		transfer_complete(ep, req, -ECONNRESET);
+	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+
+	return 0;
+}
+
+static int r8a66597_set_halt(struct usb_ep *_ep, int value)
+{
+	struct r8a66597_ep *ep = container_of(_ep, struct r8a66597_ep, ep);
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&ep->r8a66597->lock, flags);
+	if (!list_empty(&ep->queue)) {
+		ret = -EAGAIN;
+	} else if (value) {
+		ep->busy = 1;
+		pipe_stall(ep->r8a66597, ep->pipenum);
+	} else {
+		ep->busy = 0;
+		ep->wedge = 0;
+		pipe_stop(ep->r8a66597, ep->pipenum);
+	}
+	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+	return ret;
+}
+
+static int r8a66597_set_wedge(struct usb_ep *_ep)
+{
+	struct r8a66597_ep *ep;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+
+	if (!ep || !ep->ep.desc)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->r8a66597->lock, flags);
+	ep->wedge = 1;
+	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+
+	return usb_ep_set_halt(_ep);
+}
+
+static void r8a66597_fifo_flush(struct usb_ep *_ep)
+{
+	struct r8a66597_ep *ep;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	spin_lock_irqsave(&ep->r8a66597->lock, flags);
+	if (list_empty(&ep->queue) && !ep->busy) {
+		pipe_stop(ep->r8a66597, ep->pipenum);
+		r8a66597_bclr(ep->r8a66597, BCLR, ep->fifoctr);
+		r8a66597_write(ep->r8a66597, ACLRM, ep->pipectr);
+		r8a66597_write(ep->r8a66597, 0, ep->pipectr);
+	}
+	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+}
+
+static const struct usb_ep_ops r8a66597_ep_ops = {
+	.enable		= r8a66597_enable,
+	.disable	= r8a66597_disable,
+
+	.alloc_request	= r8a66597_alloc_request,
+	.free_request	= r8a66597_free_request,
+
+	.queue		= r8a66597_queue,
+	.dequeue	= r8a66597_dequeue,
+
+	.set_halt	= r8a66597_set_halt,
+	.set_wedge	= r8a66597_set_wedge,
+	.fifo_flush	= r8a66597_fifo_flush,
+};
+
+/*-------------------------------------------------------------------------*/
+static int r8a66597_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget);
+
+	if (!driver
+			|| driver->max_speed < USB_SPEED_HIGH
+			|| !driver->setup)
+		return -EINVAL;
+	if (!r8a66597)
+		return -ENODEV;
+
+	/* hook up the driver */
+	r8a66597->driver = driver;
+
+	init_controller(r8a66597);
+	r8a66597_bset(r8a66597, VBSE, INTENB0);
+	if (r8a66597_read(r8a66597, INTSTS0) & VBSTS) {
+		r8a66597_start_xclock(r8a66597);
+		/* start vbus sampling */
+		r8a66597->old_vbus = r8a66597_read(r8a66597,
+					 INTSTS0) & VBSTS;
+		r8a66597->scount = R8A66597_MAX_SAMPLING;
+		mod_timer(&r8a66597->timer, jiffies + msecs_to_jiffies(50));
+	}
+
+	return 0;
+}
+
+static int r8a66597_stop(struct usb_gadget *gadget)
+{
+	struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&r8a66597->lock, flags);
+	r8a66597_bclr(r8a66597, VBSE, INTENB0);
+	disable_controller(r8a66597);
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
+
+	r8a66597->driver = NULL;
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int r8a66597_get_frame(struct usb_gadget *_gadget)
+{
+	struct r8a66597 *r8a66597 = gadget_to_r8a66597(_gadget);
+	return r8a66597_read(r8a66597, FRMNUM) & 0x03FF;
+}
+
+static int r8a66597_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&r8a66597->lock, flags);
+	if (is_on)
+		r8a66597_bset(r8a66597, DPRPU, SYSCFG0);
+	else
+		r8a66597_bclr(r8a66597, DPRPU, SYSCFG0);
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
+
+	return 0;
+}
+
+static int r8a66597_set_selfpowered(struct usb_gadget *gadget, int is_self)
+{
+	struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget);
+
+	gadget->is_selfpowered = (is_self != 0);
+	if (is_self)
+		r8a66597->device_status |= 1 << USB_DEVICE_SELF_POWERED;
+	else
+		r8a66597->device_status &= ~(1 << USB_DEVICE_SELF_POWERED);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops r8a66597_gadget_ops = {
+	.get_frame		= r8a66597_get_frame,
+	.udc_start		= r8a66597_start,
+	.udc_stop		= r8a66597_stop,
+	.pullup			= r8a66597_pullup,
+	.set_selfpowered	= r8a66597_set_selfpowered,
+};
+
+static int r8a66597_remove(struct platform_device *pdev)
+{
+	struct r8a66597		*r8a66597 = platform_get_drvdata(pdev);
+
+	usb_del_gadget_udc(&r8a66597->gadget);
+	del_timer_sync(&r8a66597->timer);
+	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
+
+	if (r8a66597->pdata->on_chip) {
+		clk_disable_unprepare(r8a66597->clk);
+	}
+
+	return 0;
+}
+
+static void nop_completion(struct usb_ep *ep, struct usb_request *r)
+{
+}
+
+static int r8a66597_sudmac_ioremap(struct r8a66597 *r8a66597,
+					  struct platform_device *pdev)
+{
+	r8a66597->sudmac_reg =
+		devm_platform_ioremap_resource_byname(pdev, "sudmac");
+	return PTR_ERR_OR_ZERO(r8a66597->sudmac_reg);
+}
+
+static int r8a66597_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	char clk_name[8];
+	struct resource *ires;
+	int irq;
+	void __iomem *reg = NULL;
+	struct r8a66597 *r8a66597 = NULL;
+	int ret = 0;
+	int i;
+	unsigned long irq_trigger;
+
+	reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!ires)
+		return -EINVAL;
+	irq = ires->start;
+	irq_trigger = ires->flags & IRQF_TRIGGER_MASK;
+
+	if (irq < 0) {
+		dev_err(dev, "platform_get_irq error.\n");
+		return -ENODEV;
+	}
+
+	/* initialize ucd */
+	r8a66597 = devm_kzalloc(dev, sizeof(struct r8a66597), GFP_KERNEL);
+	if (r8a66597 == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&r8a66597->lock);
+	platform_set_drvdata(pdev, r8a66597);
+	r8a66597->pdata = dev_get_platdata(dev);
+	r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
+
+	r8a66597->gadget.ops = &r8a66597_gadget_ops;
+	r8a66597->gadget.max_speed = USB_SPEED_HIGH;
+	r8a66597->gadget.name = udc_name;
+
+	timer_setup(&r8a66597->timer, r8a66597_timer, 0);
+	r8a66597->reg = reg;
+
+	if (r8a66597->pdata->on_chip) {
+		snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
+		r8a66597->clk = devm_clk_get(dev, clk_name);
+		if (IS_ERR(r8a66597->clk)) {
+			dev_err(dev, "cannot get clock \"%s\"\n", clk_name);
+			return PTR_ERR(r8a66597->clk);
+		}
+		clk_prepare_enable(r8a66597->clk);
+	}
+
+	if (r8a66597->pdata->sudmac) {
+		ret = r8a66597_sudmac_ioremap(r8a66597, pdev);
+		if (ret < 0)
+			goto clean_up2;
+	}
+
+	disable_controller(r8a66597); /* make sure controller is disabled */
+
+	ret = devm_request_irq(dev, irq, r8a66597_irq, IRQF_SHARED,
+			       udc_name, r8a66597);
+	if (ret < 0) {
+		dev_err(dev, "request_irq error (%d)\n", ret);
+		goto clean_up2;
+	}
+
+	INIT_LIST_HEAD(&r8a66597->gadget.ep_list);
+	r8a66597->gadget.ep0 = &r8a66597->ep[0].ep;
+	INIT_LIST_HEAD(&r8a66597->gadget.ep0->ep_list);
+	for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) {
+		struct r8a66597_ep *ep = &r8a66597->ep[i];
+
+		if (i != 0) {
+			INIT_LIST_HEAD(&r8a66597->ep[i].ep.ep_list);
+			list_add_tail(&r8a66597->ep[i].ep.ep_list,
+					&r8a66597->gadget.ep_list);
+		}
+		ep->r8a66597 = r8a66597;
+		INIT_LIST_HEAD(&ep->queue);
+		ep->ep.name = r8a66597_ep_name[i];
+		ep->ep.ops = &r8a66597_ep_ops;
+		usb_ep_set_maxpacket_limit(&ep->ep, 512);
+
+		if (i == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
+	}
+	usb_ep_set_maxpacket_limit(&r8a66597->ep[0].ep, 64);
+	r8a66597->ep[0].pipenum = 0;
+	r8a66597->ep[0].fifoaddr = CFIFO;
+	r8a66597->ep[0].fifosel = CFIFOSEL;
+	r8a66597->ep[0].fifoctr = CFIFOCTR;
+	r8a66597->ep[0].pipectr = get_pipectr_addr(0);
+	r8a66597->pipenum2ep[0] = &r8a66597->ep[0];
+	r8a66597->epaddr2ep[0] = &r8a66597->ep[0];
+
+	r8a66597->ep0_req = r8a66597_alloc_request(&r8a66597->ep[0].ep,
+							GFP_KERNEL);
+	if (r8a66597->ep0_req == NULL) {
+		ret = -ENOMEM;
+		goto clean_up2;
+	}
+	r8a66597->ep0_req->complete = nop_completion;
+
+	ret = usb_add_gadget_udc(dev, &r8a66597->gadget);
+	if (ret)
+		goto err_add_udc;
+
+	dev_info(dev, "version %s\n", DRIVER_VERSION);
+	return 0;
+
+err_add_udc:
+	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
+clean_up2:
+	if (r8a66597->pdata->on_chip)
+		clk_disable_unprepare(r8a66597->clk);
+
+	if (r8a66597->ep0_req)
+		r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
+
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+static struct platform_driver r8a66597_driver = {
+	.remove =	r8a66597_remove,
+	.driver		= {
+		.name =	udc_name,
+	},
+};
+
+module_platform_driver_probe(r8a66597_driver, r8a66597_probe);
+
+MODULE_DESCRIPTION("R8A66597 USB gadget driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yoshihiro Shimoda");
+MODULE_ALIAS("platform:r8a66597_udc");
diff --git a/drivers/usb/gadget/udc/r8a66597-udc.h b/drivers/usb/gadget/udc/r8a66597-udc.h
new file mode 100644
index 000000000..9a115caba
--- /dev/null
+++ b/drivers/usb/gadget/udc/r8a66597-udc.h
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * R8A66597 UDC
+ *
+ * Copyright (C) 2007-2009 Renesas Solutions Corp.
+ *
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+ */
+
+#ifndef __R8A66597_H__
+#define __R8A66597_H__
+
+#include <linux/clk.h>
+#include <linux/usb/r8a66597.h>
+
+#define R8A66597_MAX_SAMPLING	10
+
+#define R8A66597_MAX_NUM_PIPE	8
+#define R8A66597_MAX_NUM_BULK	3
+#define R8A66597_MAX_NUM_ISOC	2
+#define R8A66597_MAX_NUM_INT	2
+
+#define R8A66597_BASE_PIPENUM_BULK	3
+#define R8A66597_BASE_PIPENUM_ISOC	1
+#define R8A66597_BASE_PIPENUM_INT	6
+
+#define R8A66597_BASE_BUFNUM	6
+#define R8A66597_MAX_BUFNUM	0x4F
+
+#define is_bulk_pipe(pipenum)	\
+	((pipenum >= R8A66597_BASE_PIPENUM_BULK) && \
+	 (pipenum < (R8A66597_BASE_PIPENUM_BULK + R8A66597_MAX_NUM_BULK)))
+#define is_interrupt_pipe(pipenum)	\
+	((pipenum >= R8A66597_BASE_PIPENUM_INT) && \
+	 (pipenum < (R8A66597_BASE_PIPENUM_INT + R8A66597_MAX_NUM_INT)))
+#define is_isoc_pipe(pipenum)	\
+	((pipenum >= R8A66597_BASE_PIPENUM_ISOC) && \
+	 (pipenum < (R8A66597_BASE_PIPENUM_ISOC + R8A66597_MAX_NUM_ISOC)))
+
+#define r8a66597_is_sudmac(r8a66597)	(r8a66597->pdata->sudmac)
+struct r8a66597_pipe_info {
+	u16	pipe;
+	u16	epnum;
+	u16	maxpacket;
+	u16	type;
+	u16	interval;
+	u16	dir_in;
+};
+
+struct r8a66597_request {
+	struct usb_request	req;
+	struct list_head	queue;
+};
+
+struct r8a66597_ep {
+	struct usb_ep		ep;
+	struct r8a66597		*r8a66597;
+	struct r8a66597_dma	*dma;
+
+	struct list_head	queue;
+	unsigned		busy:1;
+	unsigned		wedge:1;
+	unsigned		internal_ccpl:1;	/* use only control */
+
+	/* this member can able to after r8a66597_enable */
+	unsigned		use_dma:1;
+	u16			pipenum;
+	u16			type;
+
+	/* register address */
+	unsigned char		fifoaddr;
+	unsigned char		fifosel;
+	unsigned char		fifoctr;
+	unsigned char		pipectr;
+	unsigned char		pipetre;
+	unsigned char		pipetrn;
+};
+
+struct r8a66597_dma {
+	unsigned		used:1;
+	unsigned		dir:1;	/* 1 = IN(write), 0 = OUT(read) */
+};
+
+struct r8a66597 {
+	spinlock_t		lock;
+	void __iomem		*reg;
+	void __iomem		*sudmac_reg;
+
+	struct clk *clk;
+	struct r8a66597_platdata	*pdata;
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+
+	struct r8a66597_ep	ep[R8A66597_MAX_NUM_PIPE];
+	struct r8a66597_ep	*pipenum2ep[R8A66597_MAX_NUM_PIPE];
+	struct r8a66597_ep	*epaddr2ep[16];
+	struct r8a66597_dma	dma;
+
+	struct timer_list	timer;
+	struct usb_request	*ep0_req;	/* for internal request */
+	u16			ep0_data;	/* for internal request */
+	u16			old_vbus;
+	u16			scount;
+	u16			old_dvsq;
+	u16			device_status;	/* for GET_STATUS */
+
+	/* pipe config */
+	unsigned char bulk;
+	unsigned char interrupt;
+	unsigned char isochronous;
+	unsigned char num_dma;
+
+	unsigned irq_sense_low:1;
+};
+
+#define gadget_to_r8a66597(_gadget)	\
+		container_of(_gadget, struct r8a66597, gadget)
+#define r8a66597_to_gadget(r8a66597) (&r8a66597->gadget)
+#define r8a66597_to_dev(r8a66597)	(r8a66597->gadget.dev.parent)
+
+static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
+{
+	return ioread16(r8a66597->reg + offset);
+}
+
+static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
+				      unsigned long offset,
+				      unsigned char *buf,
+				      int len)
+{
+	void __iomem *fifoaddr = r8a66597->reg + offset;
+	unsigned int data = 0;
+	int i;
+
+	if (r8a66597->pdata->on_chip) {
+		/* 32-bit accesses for on_chip controllers */
+
+		/* aligned buf case */
+		if (len >= 4 && !((unsigned long)buf & 0x03)) {
+			ioread32_rep(fifoaddr, buf, len / 4);
+			buf += len & ~0x03;
+			len &= 0x03;
+		}
+
+		/* unaligned buf case */
+		for (i = 0; i < len; i++) {
+			if (!(i & 0x03))
+				data = ioread32(fifoaddr);
+
+			buf[i] = (data >> ((i & 0x03) * 8)) & 0xff;
+		}
+	} else {
+		/* 16-bit accesses for external controllers */
+
+		/* aligned buf case */
+		if (len >= 2 && !((unsigned long)buf & 0x01)) {
+			ioread16_rep(fifoaddr, buf, len / 2);
+			buf += len & ~0x01;
+			len &= 0x01;
+		}
+
+		/* unaligned buf case */
+		for (i = 0; i < len; i++) {
+			if (!(i & 0x01))
+				data = ioread16(fifoaddr);
+
+			buf[i] = (data >> ((i & 0x01) * 8)) & 0xff;
+		}
+	}
+}
+
+static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
+				  unsigned long offset)
+{
+	iowrite16(val, r8a66597->reg + offset);
+}
+
+static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
+				 u16 val, u16 pat, unsigned long offset)
+{
+	u16 tmp;
+	tmp = r8a66597_read(r8a66597, offset);
+	tmp = tmp & (~pat);
+	tmp = tmp | val;
+	r8a66597_write(r8a66597, tmp, offset);
+}
+
+#define r8a66597_bclr(r8a66597, val, offset)	\
+			r8a66597_mdfy(r8a66597, 0, val, offset)
+#define r8a66597_bset(r8a66597, val, offset)	\
+			r8a66597_mdfy(r8a66597, val, 0, offset)
+
+static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
+				       struct r8a66597_ep *ep,
+				       unsigned char *buf,
+				       int len)
+{
+	void __iomem *fifoaddr = r8a66597->reg + ep->fifoaddr;
+	int adj = 0;
+	int i;
+
+	if (r8a66597->pdata->on_chip) {
+		/* 32-bit access only if buf is 32-bit aligned */
+		if (len >= 4 && !((unsigned long)buf & 0x03)) {
+			iowrite32_rep(fifoaddr, buf, len / 4);
+			buf += len & ~0x03;
+			len &= 0x03;
+		}
+	} else {
+		/* 16-bit access only if buf is 16-bit aligned */
+		if (len >= 2 && !((unsigned long)buf & 0x01)) {
+			iowrite16_rep(fifoaddr, buf, len / 2);
+			buf += len & ~0x01;
+			len &= 0x01;
+		}
+	}
+
+	/* adjust fifo address in the little endian case */
+	if (!(r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)) {
+		if (r8a66597->pdata->on_chip)
+			adj = 0x03; /* 32-bit wide */
+		else
+			adj = 0x01; /* 16-bit wide */
+	}
+
+	if (r8a66597->pdata->wr0_shorted_to_wr1)
+		r8a66597_bclr(r8a66597, MBW_16, ep->fifosel);
+	for (i = 0; i < len; i++)
+		iowrite8(buf[i], fifoaddr + adj - (i & adj));
+	if (r8a66597->pdata->wr0_shorted_to_wr1)
+		r8a66597_bclr(r8a66597, MBW_16, ep->fifosel);
+}
+
+static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata)
+{
+	u16 clock = 0;
+
+	switch (pdata->xtal) {
+	case R8A66597_PLATDATA_XTAL_12MHZ:
+		clock = XTAL12;
+		break;
+	case R8A66597_PLATDATA_XTAL_24MHZ:
+		clock = XTAL24;
+		break;
+	case R8A66597_PLATDATA_XTAL_48MHZ:
+		clock = XTAL48;
+		break;
+	default:
+		printk(KERN_ERR "r8a66597: platdata clock is wrong.\n");
+		break;
+	}
+
+	return clock;
+}
+
+static inline u32 r8a66597_sudmac_read(struct r8a66597 *r8a66597,
+				       unsigned long offset)
+{
+	return ioread32(r8a66597->sudmac_reg + offset);
+}
+
+static inline void r8a66597_sudmac_write(struct r8a66597 *r8a66597, u32 val,
+					 unsigned long offset)
+{
+	iowrite32(val, r8a66597->sudmac_reg + offset);
+}
+
+#define get_pipectr_addr(pipenum)	(PIPE1CTR + (pipenum - 1) * 2)
+#define get_pipetre_addr(pipenum)	(PIPE1TRE + (pipenum - 1) * 4)
+#define get_pipetrn_addr(pipenum)	(PIPE1TRN + (pipenum - 1) * 4)
+
+#define enable_irq_ready(r8a66597, pipenum)	\
+	enable_pipe_irq(r8a66597, pipenum, BRDYENB)
+#define disable_irq_ready(r8a66597, pipenum)	\
+	disable_pipe_irq(r8a66597, pipenum, BRDYENB)
+#define enable_irq_empty(r8a66597, pipenum)	\
+	enable_pipe_irq(r8a66597, pipenum, BEMPENB)
+#define disable_irq_empty(r8a66597, pipenum)	\
+	disable_pipe_irq(r8a66597, pipenum, BEMPENB)
+#define enable_irq_nrdy(r8a66597, pipenum)	\
+	enable_pipe_irq(r8a66597, pipenum, NRDYENB)
+#define disable_irq_nrdy(r8a66597, pipenum)	\
+	disable_pipe_irq(r8a66597, pipenum, NRDYENB)
+
+#endif	/* __R8A66597_H__ */
+
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
new file mode 100644
index 000000000..32c9e3692
--- /dev/null
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -0,0 +1,2999 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas USB3.0 Peripheral driver (USB gadget)
+ *
+ * Copyright (C) 2015-2017  Renesas Electronics Corporation
+ */
+
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/extcon-provider.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/sys_soc.h>
+#include <linux/uaccess.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/of.h>
+#include <linux/usb/role.h>
+
+/* register definitions */
+#define USB3_AXI_INT_STA	0x008
+#define USB3_AXI_INT_ENA	0x00c
+#define USB3_DMA_INT_STA	0x010
+#define USB3_DMA_INT_ENA	0x014
+#define USB3_DMA_CH0_CON(n)	(0x030 + ((n) - 1) * 0x10) /* n = 1 to 4 */
+#define USB3_DMA_CH0_PRD_ADR(n)	(0x034 + ((n) - 1) * 0x10) /* n = 1 to 4 */
+#define USB3_USB_COM_CON	0x200
+#define USB3_USB20_CON		0x204
+#define USB3_USB30_CON		0x208
+#define USB3_USB_STA		0x210
+#define USB3_DRD_CON(p)		((p)->is_rzv2m ? 0x400 : 0x218)
+#define USB3_USB_INT_STA_1	0x220
+#define USB3_USB_INT_STA_2	0x224
+#define USB3_USB_INT_ENA_1	0x228
+#define USB3_USB_INT_ENA_2	0x22c
+#define USB3_STUP_DAT_0		0x230
+#define USB3_STUP_DAT_1		0x234
+#define USB3_USB_OTG_STA(p)	((p)->is_rzv2m ? 0x410 : 0x268)
+#define USB3_USB_OTG_INT_STA(p)	((p)->is_rzv2m ? 0x414 : 0x26c)
+#define USB3_USB_OTG_INT_ENA(p)	((p)->is_rzv2m ? 0x418 : 0x270)
+#define USB3_P0_MOD		0x280
+#define USB3_P0_CON		0x288
+#define USB3_P0_STA		0x28c
+#define USB3_P0_INT_STA		0x290
+#define USB3_P0_INT_ENA		0x294
+#define USB3_P0_LNG		0x2a0
+#define USB3_P0_READ		0x2a4
+#define USB3_P0_WRITE		0x2a8
+#define USB3_PIPE_COM		0x2b0
+#define USB3_PN_MOD		0x2c0
+#define USB3_PN_RAMMAP		0x2c4
+#define USB3_PN_CON		0x2c8
+#define USB3_PN_STA		0x2cc
+#define USB3_PN_INT_STA		0x2d0
+#define USB3_PN_INT_ENA		0x2d4
+#define USB3_PN_LNG		0x2e0
+#define USB3_PN_READ		0x2e4
+#define USB3_PN_WRITE		0x2e8
+#define USB3_SSIFCMD		0x340
+
+/* AXI_INT_ENA and AXI_INT_STA */
+#define AXI_INT_DMAINT		BIT(31)
+#define AXI_INT_EPCINT		BIT(30)
+/* PRD's n = from 1 to 4 */
+#define AXI_INT_PRDEN_CLR_STA_SHIFT(n)	(16 + (n) - 1)
+#define AXI_INT_PRDERR_STA_SHIFT(n)	(0 + (n) - 1)
+#define AXI_INT_PRDEN_CLR_STA(n)	(1 << AXI_INT_PRDEN_CLR_STA_SHIFT(n))
+#define AXI_INT_PRDERR_STA(n)		(1 << AXI_INT_PRDERR_STA_SHIFT(n))
+
+/* DMA_INT_ENA and DMA_INT_STA */
+#define DMA_INT(n)		BIT(n)
+
+/* DMA_CH0_CONn */
+#define DMA_CON_PIPE_DIR	BIT(15)		/* 1: In Transfer */
+#define DMA_CON_PIPE_NO_SHIFT	8
+#define DMA_CON_PIPE_NO_MASK	GENMASK(12, DMA_CON_PIPE_NO_SHIFT)
+#define DMA_COM_PIPE_NO(n)	(((n) << DMA_CON_PIPE_NO_SHIFT) & \
+					 DMA_CON_PIPE_NO_MASK)
+#define DMA_CON_PRD_EN		BIT(0)
+
+/* LCLKSEL */
+#define LCLKSEL_LSEL		BIT(18)
+
+/* USB_COM_CON */
+#define USB_COM_CON_CONF		BIT(24)
+#define USB_COM_CON_PN_WDATAIF_NL	BIT(23)
+#define USB_COM_CON_PN_RDATAIF_NL	BIT(22)
+#define USB_COM_CON_PN_LSTTR_PP		BIT(21)
+#define USB_COM_CON_SPD_MODE		BIT(17)
+#define USB_COM_CON_EP0_EN		BIT(16)
+#define USB_COM_CON_DEV_ADDR_SHIFT	8
+#define USB_COM_CON_DEV_ADDR_MASK	GENMASK(14, USB_COM_CON_DEV_ADDR_SHIFT)
+#define USB_COM_CON_DEV_ADDR(n)		(((n) << USB_COM_CON_DEV_ADDR_SHIFT) & \
+					 USB_COM_CON_DEV_ADDR_MASK)
+#define USB_COM_CON_RX_DETECTION	BIT(1)
+#define USB_COM_CON_PIPE_CLR		BIT(0)
+
+/* USB20_CON */
+#define USB20_CON_B2_PUE		BIT(31)
+#define USB20_CON_B2_SUSPEND		BIT(24)
+#define USB20_CON_B2_CONNECT		BIT(17)
+#define USB20_CON_B2_TSTMOD_SHIFT	8
+#define USB20_CON_B2_TSTMOD_MASK	GENMASK(10, USB20_CON_B2_TSTMOD_SHIFT)
+#define USB20_CON_B2_TSTMOD(n)		(((n) << USB20_CON_B2_TSTMOD_SHIFT) & \
+					 USB20_CON_B2_TSTMOD_MASK)
+#define USB20_CON_B2_TSTMOD_EN		BIT(0)
+
+/* USB30_CON */
+#define USB30_CON_POW_SEL_SHIFT		24
+#define USB30_CON_POW_SEL_MASK		GENMASK(26, USB30_CON_POW_SEL_SHIFT)
+#define USB30_CON_POW_SEL_IN_U3		BIT(26)
+#define USB30_CON_POW_SEL_IN_DISCON	0
+#define USB30_CON_POW_SEL_P2_TO_P0	BIT(25)
+#define USB30_CON_POW_SEL_P0_TO_P3	BIT(24)
+#define USB30_CON_POW_SEL_P0_TO_P2	0
+#define USB30_CON_B3_PLLWAKE		BIT(23)
+#define USB30_CON_B3_CONNECT		BIT(17)
+#define USB30_CON_B3_HOTRST_CMP		BIT(1)
+
+/* USB_STA */
+#define USB_STA_SPEED_MASK	(BIT(2) | BIT(1))
+#define USB_STA_SPEED_HS	BIT(2)
+#define USB_STA_SPEED_FS	BIT(1)
+#define USB_STA_SPEED_SS	0
+#define USB_STA_VBUS_STA	BIT(0)
+
+/* DRD_CON */
+#define DRD_CON_PERI_RST	BIT(31)		/* rzv2m only */
+#define DRD_CON_HOST_RST	BIT(30)		/* rzv2m only */
+#define DRD_CON_PERI_CON	BIT(24)
+#define DRD_CON_VBOUT		BIT(0)
+
+/* USB_INT_ENA_1 and USB_INT_STA_1 */
+#define USB_INT_1_B3_PLLWKUP	BIT(31)
+#define USB_INT_1_B3_LUPSUCS	BIT(30)
+#define USB_INT_1_B3_DISABLE	BIT(27)
+#define USB_INT_1_B3_WRMRST	BIT(21)
+#define USB_INT_1_B3_HOTRST	BIT(20)
+#define USB_INT_1_B2_USBRST	BIT(12)
+#define USB_INT_1_B2_L1SPND	BIT(11)
+#define USB_INT_1_B2_SPND	BIT(9)
+#define USB_INT_1_B2_RSUM	BIT(8)
+#define USB_INT_1_SPEED		BIT(1)
+#define USB_INT_1_VBUS_CNG	BIT(0)
+
+/* USB_INT_ENA_2 and USB_INT_STA_2 */
+#define USB_INT_2_PIPE(n)	BIT(n)
+
+/* USB_OTG_STA, USB_OTG_INT_STA and USB_OTG_INT_ENA */
+#define USB_OTG_IDMON(p)	((p)->is_rzv2m ? BIT(0) : BIT(4))
+
+/* P0_MOD */
+#define P0_MOD_DIR		BIT(6)
+
+/* P0_CON and PN_CON */
+#define PX_CON_BYTE_EN_MASK		(BIT(10) | BIT(9))
+#define PX_CON_BYTE_EN_SHIFT		9
+#define PX_CON_BYTE_EN_BYTES(n)		(((n) << PX_CON_BYTE_EN_SHIFT) & \
+					 PX_CON_BYTE_EN_MASK)
+#define PX_CON_SEND			BIT(8)
+
+/* P0_CON */
+#define P0_CON_ST_RES_MASK		(BIT(27) | BIT(26))
+#define P0_CON_ST_RES_FORCE_STALL	BIT(27)
+#define P0_CON_ST_RES_NORMAL		BIT(26)
+#define P0_CON_ST_RES_FORCE_NRDY	0
+#define P0_CON_OT_RES_MASK		(BIT(25) | BIT(24))
+#define P0_CON_OT_RES_FORCE_STALL	BIT(25)
+#define P0_CON_OT_RES_NORMAL		BIT(24)
+#define P0_CON_OT_RES_FORCE_NRDY	0
+#define P0_CON_IN_RES_MASK		(BIT(17) | BIT(16))
+#define P0_CON_IN_RES_FORCE_STALL	BIT(17)
+#define P0_CON_IN_RES_NORMAL		BIT(16)
+#define P0_CON_IN_RES_FORCE_NRDY	0
+#define P0_CON_RES_WEN			BIT(7)
+#define P0_CON_BCLR			BIT(1)
+
+/* P0_STA and PN_STA */
+#define PX_STA_BUFSTS		BIT(0)
+
+/* P0_INT_ENA and P0_INT_STA */
+#define P0_INT_STSED		BIT(18)
+#define P0_INT_STSST		BIT(17)
+#define P0_INT_SETUP		BIT(16)
+#define P0_INT_RCVNL		BIT(8)
+#define P0_INT_ERDY		BIT(7)
+#define P0_INT_FLOW		BIT(6)
+#define P0_INT_STALL		BIT(2)
+#define P0_INT_NRDY		BIT(1)
+#define P0_INT_BFRDY		BIT(0)
+#define P0_INT_ALL_BITS		(P0_INT_STSED | P0_INT_SETUP | P0_INT_BFRDY)
+
+/* PN_MOD */
+#define PN_MOD_DIR		BIT(6)
+#define PN_MOD_TYPE_SHIFT	4
+#define PN_MOD_TYPE_MASK	GENMASK(5, PN_MOD_TYPE_SHIFT)
+#define PN_MOD_TYPE(n)		(((n) << PN_MOD_TYPE_SHIFT) & \
+				 PN_MOD_TYPE_MASK)
+#define PN_MOD_EPNUM_MASK	GENMASK(3, 0)
+#define PN_MOD_EPNUM(n)		((n) & PN_MOD_EPNUM_MASK)
+
+/* PN_RAMMAP */
+#define PN_RAMMAP_RAMAREA_SHIFT	29
+#define PN_RAMMAP_RAMAREA_MASK	GENMASK(31, PN_RAMMAP_RAMAREA_SHIFT)
+#define PN_RAMMAP_RAMAREA_16KB	BIT(31)
+#define PN_RAMMAP_RAMAREA_8KB	(BIT(30) | BIT(29))
+#define PN_RAMMAP_RAMAREA_4KB	BIT(30)
+#define PN_RAMMAP_RAMAREA_2KB	BIT(29)
+#define PN_RAMMAP_RAMAREA_1KB	0
+#define PN_RAMMAP_MPKT_SHIFT	16
+#define PN_RAMMAP_MPKT_MASK	GENMASK(26, PN_RAMMAP_MPKT_SHIFT)
+#define PN_RAMMAP_MPKT(n)	(((n) << PN_RAMMAP_MPKT_SHIFT) & \
+				 PN_RAMMAP_MPKT_MASK)
+#define PN_RAMMAP_RAMIF_SHIFT	14
+#define PN_RAMMAP_RAMIF_MASK	GENMASK(15, PN_RAMMAP_RAMIF_SHIFT)
+#define PN_RAMMAP_RAMIF(n)	(((n) << PN_RAMMAP_RAMIF_SHIFT) & \
+				 PN_RAMMAP_RAMIF_MASK)
+#define PN_RAMMAP_BASEAD_MASK	GENMASK(13, 0)
+#define PN_RAMMAP_BASEAD(offs)	(((offs) >> 3) & PN_RAMMAP_BASEAD_MASK)
+#define PN_RAMMAP_DATA(area, ramif, basead)	((PN_RAMMAP_##area) | \
+						 (PN_RAMMAP_RAMIF(ramif)) | \
+						 (PN_RAMMAP_BASEAD(basead)))
+
+/* PN_CON */
+#define PN_CON_EN		BIT(31)
+#define PN_CON_DATAIF_EN	BIT(30)
+#define PN_CON_RES_MASK		(BIT(17) | BIT(16))
+#define PN_CON_RES_FORCE_STALL	BIT(17)
+#define PN_CON_RES_NORMAL	BIT(16)
+#define PN_CON_RES_FORCE_NRDY	0
+#define PN_CON_LAST		BIT(11)
+#define PN_CON_RES_WEN		BIT(7)
+#define PN_CON_CLR		BIT(0)
+
+/* PN_INT_STA and PN_INT_ENA */
+#define PN_INT_LSTTR	BIT(4)
+#define PN_INT_BFRDY	BIT(0)
+
+/* USB3_SSIFCMD */
+#define SSIFCMD_URES_U2		BIT(9)
+#define SSIFCMD_URES_U1		BIT(8)
+#define SSIFCMD_UDIR_U2		BIT(7)
+#define SSIFCMD_UDIR_U1		BIT(6)
+#define SSIFCMD_UREQ_U2		BIT(5)
+#define SSIFCMD_UREQ_U1		BIT(4)
+
+#define USB3_EP0_SS_MAX_PACKET_SIZE	512
+#define USB3_EP0_HSFS_MAX_PACKET_SIZE	64
+#define USB3_EP0_BUF_SIZE		8
+#define USB3_MAX_NUM_PIPES(p)		((p)->is_rzv2m ? 16 : 6)	/* This includes PIPE 0 */
+#define USB3_WAIT_US			3
+#define USB3_DMA_NUM_SETTING_AREA	4
+/*
+ * To avoid double-meaning of "0" (xferred 65536 bytes or received zlp if
+ * buffer size is 65536), this driver uses the maximum size per a entry is
+ * 32768 bytes.
+ */
+#define USB3_DMA_MAX_XFER_SIZE		32768
+#define USB3_DMA_PRD_SIZE		4096
+
+struct renesas_usb3;
+
+/* Physical Region Descriptor Table */
+struct renesas_usb3_prd {
+	u32 word1;
+#define USB3_PRD1_E		BIT(30)		/* the end of chain */
+#define USB3_PRD1_U		BIT(29)		/* completion of transfer */
+#define USB3_PRD1_D		BIT(28)		/* Error occurred */
+#define USB3_PRD1_INT		BIT(27)		/* Interrupt occurred */
+#define USB3_PRD1_LST		BIT(26)		/* Last Packet */
+#define USB3_PRD1_B_INC		BIT(24)
+#define USB3_PRD1_MPS_8		0
+#define USB3_PRD1_MPS_16	BIT(21)
+#define USB3_PRD1_MPS_32	BIT(22)
+#define USB3_PRD1_MPS_64	(BIT(22) | BIT(21))
+#define USB3_PRD1_MPS_512	BIT(23)
+#define USB3_PRD1_MPS_1024	(BIT(23) | BIT(21))
+#define USB3_PRD1_MPS_RESERVED	(BIT(23) | BIT(22) | BIT(21))
+#define USB3_PRD1_SIZE_MASK	GENMASK(15, 0)
+
+	u32 bap;
+};
+#define USB3_DMA_NUM_PRD_ENTRIES	(USB3_DMA_PRD_SIZE / \
+					  sizeof(struct renesas_usb3_prd))
+#define USB3_DMA_MAX_XFER_SIZE_ALL_PRDS	(USB3_DMA_PRD_SIZE / \
+					 sizeof(struct renesas_usb3_prd) * \
+					 USB3_DMA_MAX_XFER_SIZE)
+
+struct renesas_usb3_dma {
+	struct renesas_usb3_prd *prd;
+	dma_addr_t prd_dma;
+	int num;	/* Setting area number (from 1 to 4) */
+	bool used;
+};
+
+struct renesas_usb3_request {
+	struct usb_request	req;
+	struct list_head	queue;
+};
+
+#define USB3_EP_NAME_SIZE	8
+struct renesas_usb3_ep {
+	struct usb_ep ep;
+	struct renesas_usb3 *usb3;
+	struct renesas_usb3_dma *dma;
+	int num;
+	char ep_name[USB3_EP_NAME_SIZE];
+	struct list_head queue;
+	u32 rammap_val;
+	bool dir_in;
+	bool halt;
+	bool wedge;
+	bool started;
+};
+
+struct renesas_usb3_priv {
+	int ramsize_per_ramif;		/* unit = bytes */
+	int num_ramif;
+	int ramsize_per_pipe;		/* unit = bytes */
+	bool workaround_for_vbus;	/* if true, don't check vbus signal */
+	bool is_rzv2m;			/* if true, RZ/V2M SoC */
+};
+
+struct renesas_usb3 {
+	void __iomem *reg;
+	struct reset_control *drd_rstc;
+	struct reset_control *usbp_rstc;
+
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *driver;
+	struct extcon_dev *extcon;
+	struct work_struct extcon_work;
+	struct phy *phy;
+	struct dentry *dentry;
+
+	struct usb_role_switch *role_sw;
+	struct device *host_dev;
+	struct work_struct role_work;
+	enum usb_role role;
+
+	struct renesas_usb3_ep *usb3_ep;
+	int num_usb3_eps;
+
+	struct renesas_usb3_dma dma[USB3_DMA_NUM_SETTING_AREA];
+
+	spinlock_t lock;
+	int disabled_count;
+
+	struct usb_request *ep0_req;
+
+	enum usb_role connection_state;
+	u16 test_mode;
+	u8 ep0_buf[USB3_EP0_BUF_SIZE];
+	bool softconnect;
+	bool workaround_for_vbus;
+	bool extcon_host;		/* check id and set EXTCON_USB_HOST */
+	bool extcon_usb;		/* check vbus and set EXTCON_USB */
+	bool forced_b_device;
+	bool start_to_connect;
+	bool role_sw_by_connector;
+	bool is_rzv2m;
+};
+
+#define gadget_to_renesas_usb3(_gadget)	\
+		container_of(_gadget, struct renesas_usb3, gadget)
+#define renesas_usb3_to_gadget(renesas_usb3) (&renesas_usb3->gadget)
+#define usb3_to_dev(_usb3)	(_usb3->gadget.dev.parent)
+
+#define usb_ep_to_usb3_ep(_ep) container_of(_ep, struct renesas_usb3_ep, ep)
+#define usb3_ep_to_usb3(_usb3_ep) (_usb3_ep->usb3)
+#define usb_req_to_usb3_req(_req) container_of(_req, \
+					    struct renesas_usb3_request, req)
+
+#define usb3_get_ep(usb3, n) ((usb3)->usb3_ep + (n))
+#define usb3_for_each_ep(usb3_ep, usb3, i)			\
+		for ((i) = 0, usb3_ep = usb3_get_ep(usb3, (i));	\
+		     (i) < (usb3)->num_usb3_eps;		\
+		     (i)++, usb3_ep = usb3_get_ep(usb3, (i)))
+
+#define usb3_get_dma(usb3, i)	(&(usb3)->dma[i])
+#define usb3_for_each_dma(usb3, dma, i)				\
+		for ((i) = 0, dma = usb3_get_dma((usb3), (i));	\
+		     (i) < USB3_DMA_NUM_SETTING_AREA;		\
+		     (i)++, dma = usb3_get_dma((usb3), (i)))
+
+static const char udc_name[] = "renesas_usb3";
+
+static bool use_dma = 1;
+module_param(use_dma, bool, 0644);
+MODULE_PARM_DESC(use_dma, "use dedicated DMAC");
+
+static void usb3_write(struct renesas_usb3 *usb3, u32 data, u32 offs)
+{
+	iowrite32(data, usb3->reg + offs);
+}
+
+static u32 usb3_read(struct renesas_usb3 *usb3, u32 offs)
+{
+	return ioread32(usb3->reg + offs);
+}
+
+static void usb3_set_bit(struct renesas_usb3 *usb3, u32 bits, u32 offs)
+{
+	u32 val = usb3_read(usb3, offs);
+
+	val |= bits;
+	usb3_write(usb3, val, offs);
+}
+
+static void usb3_clear_bit(struct renesas_usb3 *usb3, u32 bits, u32 offs)
+{
+	u32 val = usb3_read(usb3, offs);
+
+	val &= ~bits;
+	usb3_write(usb3, val, offs);
+}
+
+static int usb3_wait(struct renesas_usb3 *usb3, u32 reg, u32 mask,
+		     u32 expected)
+{
+	int i;
+
+	for (i = 0; i < USB3_WAIT_US; i++) {
+		if ((usb3_read(usb3, reg) & mask) == expected)
+			return 0;
+		udelay(1);
+	}
+
+	dev_dbg(usb3_to_dev(usb3), "%s: timed out (%8x, %08x, %08x)\n",
+		__func__, reg, mask, expected);
+
+	return -EBUSY;
+}
+
+static void renesas_usb3_extcon_work(struct work_struct *work)
+{
+	struct renesas_usb3 *usb3 = container_of(work, struct renesas_usb3,
+						 extcon_work);
+
+	extcon_set_state_sync(usb3->extcon, EXTCON_USB_HOST, usb3->extcon_host);
+	extcon_set_state_sync(usb3->extcon, EXTCON_USB, usb3->extcon_usb);
+}
+
+static void usb3_enable_irq_1(struct renesas_usb3 *usb3, u32 bits)
+{
+	usb3_set_bit(usb3, bits, USB3_USB_INT_ENA_1);
+}
+
+static void usb3_disable_irq_1(struct renesas_usb3 *usb3, u32 bits)
+{
+	usb3_clear_bit(usb3, bits, USB3_USB_INT_ENA_1);
+}
+
+static void usb3_enable_pipe_irq(struct renesas_usb3 *usb3, int num)
+{
+	usb3_set_bit(usb3, USB_INT_2_PIPE(num), USB3_USB_INT_ENA_2);
+}
+
+static void usb3_disable_pipe_irq(struct renesas_usb3 *usb3, int num)
+{
+	usb3_clear_bit(usb3, USB_INT_2_PIPE(num), USB3_USB_INT_ENA_2);
+}
+
+static bool usb3_is_host(struct renesas_usb3 *usb3)
+{
+	return !(usb3_read(usb3, USB3_DRD_CON(usb3)) & DRD_CON_PERI_CON);
+}
+
+static void usb3_init_axi_bridge(struct renesas_usb3 *usb3)
+{
+	/* Set AXI_INT */
+	usb3_write(usb3, ~0, USB3_DMA_INT_STA);
+	usb3_write(usb3, 0, USB3_DMA_INT_ENA);
+	usb3_set_bit(usb3, AXI_INT_DMAINT | AXI_INT_EPCINT, USB3_AXI_INT_ENA);
+}
+
+static void usb3_init_epc_registers(struct renesas_usb3 *usb3)
+{
+	usb3_write(usb3, ~0, USB3_USB_INT_STA_1);
+	if (!usb3->workaround_for_vbus)
+		usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG);
+}
+
+static bool usb3_wakeup_usb2_phy(struct renesas_usb3 *usb3)
+{
+	if (!(usb3_read(usb3, USB3_USB20_CON) & USB20_CON_B2_SUSPEND))
+		return true;	/* already waked it up */
+
+	usb3_clear_bit(usb3, USB20_CON_B2_SUSPEND, USB3_USB20_CON);
+	usb3_enable_irq_1(usb3, USB_INT_1_B2_RSUM);
+
+	return false;
+}
+
+static void usb3_usb2_pullup(struct renesas_usb3 *usb3, int pullup)
+{
+	u32 bits = USB20_CON_B2_PUE | USB20_CON_B2_CONNECT;
+
+	if (usb3->softconnect && pullup)
+		usb3_set_bit(usb3, bits, USB3_USB20_CON);
+	else
+		usb3_clear_bit(usb3, bits, USB3_USB20_CON);
+}
+
+static void usb3_set_test_mode(struct renesas_usb3 *usb3)
+{
+	u32 val = usb3_read(usb3, USB3_USB20_CON);
+
+	val &= ~USB20_CON_B2_TSTMOD_MASK;
+	val |= USB20_CON_B2_TSTMOD(usb3->test_mode);
+	usb3_write(usb3, val | USB20_CON_B2_TSTMOD_EN, USB3_USB20_CON);
+	if (!usb3->test_mode)
+		usb3_clear_bit(usb3, USB20_CON_B2_TSTMOD_EN, USB3_USB20_CON);
+}
+
+static void usb3_start_usb2_connection(struct renesas_usb3 *usb3)
+{
+	usb3->disabled_count++;
+	usb3_set_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON);
+	usb3_set_bit(usb3, USB_COM_CON_SPD_MODE, USB3_USB_COM_CON);
+	usb3_usb2_pullup(usb3, 1);
+}
+
+static int usb3_is_usb3_phy_in_u3(struct renesas_usb3 *usb3)
+{
+	return usb3_read(usb3, USB3_USB30_CON) & USB30_CON_POW_SEL_IN_U3;
+}
+
+static bool usb3_wakeup_usb3_phy(struct renesas_usb3 *usb3)
+{
+	if (!usb3_is_usb3_phy_in_u3(usb3))
+		return true;	/* already waked it up */
+
+	usb3_set_bit(usb3, USB30_CON_B3_PLLWAKE, USB3_USB30_CON);
+	usb3_enable_irq_1(usb3, USB_INT_1_B3_PLLWKUP);
+
+	return false;
+}
+
+static u16 usb3_feature_get_un_enabled(struct renesas_usb3 *usb3)
+{
+	u32 mask_u2 = SSIFCMD_UDIR_U2 | SSIFCMD_UREQ_U2;
+	u32 mask_u1 = SSIFCMD_UDIR_U1 | SSIFCMD_UREQ_U1;
+	u32 val = usb3_read(usb3, USB3_SSIFCMD);
+	u16 ret = 0;
+
+	/* Enables {U2,U1} if the bits of UDIR and UREQ are set to 0 */
+	if (!(val & mask_u2))
+		ret |= 1 << USB_DEV_STAT_U2_ENABLED;
+	if (!(val & mask_u1))
+		ret |= 1 << USB_DEV_STAT_U1_ENABLED;
+
+	return ret;
+}
+
+static void usb3_feature_u2_enable(struct renesas_usb3 *usb3, bool enable)
+{
+	u32 bits = SSIFCMD_UDIR_U2 | SSIFCMD_UREQ_U2;
+
+	/* Enables U2 if the bits of UDIR and UREQ are set to 0 */
+	if (enable)
+		usb3_clear_bit(usb3, bits, USB3_SSIFCMD);
+	else
+		usb3_set_bit(usb3, bits, USB3_SSIFCMD);
+}
+
+static void usb3_feature_u1_enable(struct renesas_usb3 *usb3, bool enable)
+{
+	u32 bits = SSIFCMD_UDIR_U1 | SSIFCMD_UREQ_U1;
+
+	/* Enables U1 if the bits of UDIR and UREQ are set to 0 */
+	if (enable)
+		usb3_clear_bit(usb3, bits, USB3_SSIFCMD);
+	else
+		usb3_set_bit(usb3, bits, USB3_SSIFCMD);
+}
+
+static void usb3_start_operation_for_usb3(struct renesas_usb3 *usb3)
+{
+	usb3_set_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON);
+	usb3_clear_bit(usb3, USB_COM_CON_SPD_MODE, USB3_USB_COM_CON);
+	usb3_set_bit(usb3, USB30_CON_B3_CONNECT, USB3_USB30_CON);
+}
+
+static void usb3_start_usb3_connection(struct renesas_usb3 *usb3)
+{
+	usb3_start_operation_for_usb3(usb3);
+	usb3_set_bit(usb3, USB_COM_CON_RX_DETECTION, USB3_USB_COM_CON);
+
+	usb3_enable_irq_1(usb3, USB_INT_1_B3_LUPSUCS | USB_INT_1_B3_DISABLE |
+			  USB_INT_1_SPEED);
+}
+
+static void usb3_stop_usb3_connection(struct renesas_usb3 *usb3)
+{
+	usb3_clear_bit(usb3, USB30_CON_B3_CONNECT, USB3_USB30_CON);
+}
+
+static void usb3_transition_to_default_state(struct renesas_usb3 *usb3,
+					     bool is_usb3)
+{
+	usb3_set_bit(usb3, USB_INT_2_PIPE(0), USB3_USB_INT_ENA_2);
+	usb3_write(usb3, P0_INT_ALL_BITS, USB3_P0_INT_STA);
+	usb3_set_bit(usb3, P0_INT_ALL_BITS, USB3_P0_INT_ENA);
+
+	if (is_usb3)
+		usb3_enable_irq_1(usb3, USB_INT_1_B3_WRMRST |
+				  USB_INT_1_B3_HOTRST);
+	else
+		usb3_enable_irq_1(usb3, USB_INT_1_B2_SPND |
+				  USB_INT_1_B2_L1SPND | USB_INT_1_B2_USBRST);
+}
+
+static void usb3_connect(struct renesas_usb3 *usb3)
+{
+	if (usb3_wakeup_usb3_phy(usb3))
+		usb3_start_usb3_connection(usb3);
+}
+
+static void usb3_reset_epc(struct renesas_usb3 *usb3)
+{
+	usb3_clear_bit(usb3, USB_COM_CON_CONF, USB3_USB_COM_CON);
+	usb3_clear_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON);
+	usb3_set_bit(usb3, USB_COM_CON_PIPE_CLR, USB3_USB_COM_CON);
+	usb3->test_mode = 0;
+	usb3_set_test_mode(usb3);
+}
+
+static void usb3_disconnect(struct renesas_usb3 *usb3)
+{
+	usb3->disabled_count = 0;
+	usb3_usb2_pullup(usb3, 0);
+	usb3_clear_bit(usb3, USB30_CON_B3_CONNECT, USB3_USB30_CON);
+	usb3_reset_epc(usb3);
+	usb3_disable_irq_1(usb3, USB_INT_1_B2_RSUM | USB_INT_1_B3_PLLWKUP |
+			   USB_INT_1_B3_LUPSUCS | USB_INT_1_B3_DISABLE |
+			   USB_INT_1_SPEED | USB_INT_1_B3_WRMRST |
+			   USB_INT_1_B3_HOTRST | USB_INT_1_B2_SPND |
+			   USB_INT_1_B2_L1SPND | USB_INT_1_B2_USBRST);
+	usb3_clear_bit(usb3, USB_COM_CON_SPD_MODE, USB3_USB_COM_CON);
+	usb3_init_epc_registers(usb3);
+
+	if (usb3->driver)
+		usb3->driver->disconnect(&usb3->gadget);
+}
+
+static void usb3_check_vbus(struct renesas_usb3 *usb3)
+{
+	if (usb3->workaround_for_vbus) {
+		usb3_connect(usb3);
+	} else {
+		usb3->extcon_usb = !!(usb3_read(usb3, USB3_USB_STA) &
+							USB_STA_VBUS_STA);
+		if (usb3->extcon_usb)
+			usb3_connect(usb3);
+		else
+			usb3_disconnect(usb3);
+
+		schedule_work(&usb3->extcon_work);
+	}
+}
+
+static void renesas_usb3_role_work(struct work_struct *work)
+{
+	struct renesas_usb3 *usb3 =
+			container_of(work, struct renesas_usb3, role_work);
+
+	usb_role_switch_set_role(usb3->role_sw, usb3->role);
+}
+
+static void usb3_set_mode(struct renesas_usb3 *usb3, bool host)
+{
+	if (usb3->is_rzv2m) {
+		if (host) {
+			usb3_set_bit(usb3, DRD_CON_PERI_RST, USB3_DRD_CON(usb3));
+			usb3_clear_bit(usb3, DRD_CON_HOST_RST, USB3_DRD_CON(usb3));
+		} else {
+			usb3_set_bit(usb3, DRD_CON_HOST_RST, USB3_DRD_CON(usb3));
+			usb3_clear_bit(usb3, DRD_CON_PERI_RST, USB3_DRD_CON(usb3));
+		}
+	}
+
+	if (host)
+		usb3_clear_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON(usb3));
+	else
+		usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON(usb3));
+}
+
+static void usb3_set_mode_by_role_sw(struct renesas_usb3 *usb3, bool host)
+{
+	if (usb3->role_sw) {
+		usb3->role = host ? USB_ROLE_HOST : USB_ROLE_DEVICE;
+		schedule_work(&usb3->role_work);
+	} else {
+		usb3_set_mode(usb3, host);
+	}
+}
+
+static void usb3_vbus_out(struct renesas_usb3 *usb3, bool enable)
+{
+	if (enable)
+		usb3_set_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON(usb3));
+	else
+		usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON(usb3));
+}
+
+static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	if (!usb3->role_sw_by_connector ||
+	    usb3->connection_state != USB_ROLE_NONE) {
+		usb3_set_mode_by_role_sw(usb3, host);
+		usb3_vbus_out(usb3, a_dev);
+	}
+	/* for A-Peripheral or forced B-device mode */
+	if ((!host && a_dev) || usb3->start_to_connect)
+		usb3_connect(usb3);
+	spin_unlock_irqrestore(&usb3->lock, flags);
+}
+
+static bool usb3_is_a_device(struct renesas_usb3 *usb3)
+{
+	return !(usb3_read(usb3, USB3_USB_OTG_STA(usb3)) & USB_OTG_IDMON(usb3));
+}
+
+static void usb3_check_id(struct renesas_usb3 *usb3)
+{
+	usb3->extcon_host = usb3_is_a_device(usb3);
+
+	if ((!usb3->role_sw_by_connector && usb3->extcon_host &&
+	     !usb3->forced_b_device) || usb3->connection_state == USB_ROLE_HOST)
+		usb3_mode_config(usb3, true, true);
+	else
+		usb3_mode_config(usb3, false, false);
+
+	schedule_work(&usb3->extcon_work);
+}
+
+static void renesas_usb3_init_controller(struct renesas_usb3 *usb3)
+{
+	usb3_init_axi_bridge(usb3);
+	usb3_init_epc_registers(usb3);
+	usb3_set_bit(usb3, USB_COM_CON_PN_WDATAIF_NL |
+		     USB_COM_CON_PN_RDATAIF_NL | USB_COM_CON_PN_LSTTR_PP,
+		     USB3_USB_COM_CON);
+	usb3_write(usb3, USB_OTG_IDMON(usb3), USB3_USB_OTG_INT_STA(usb3));
+	usb3_write(usb3, USB_OTG_IDMON(usb3), USB3_USB_OTG_INT_ENA(usb3));
+
+	usb3_check_id(usb3);
+	usb3_check_vbus(usb3);
+}
+
+static void renesas_usb3_stop_controller(struct renesas_usb3 *usb3)
+{
+	usb3_disconnect(usb3);
+	usb3_write(usb3, 0, USB3_P0_INT_ENA);
+	usb3_write(usb3, 0, USB3_USB_OTG_INT_ENA(usb3));
+	usb3_write(usb3, 0, USB3_USB_INT_ENA_1);
+	usb3_write(usb3, 0, USB3_USB_INT_ENA_2);
+	usb3_write(usb3, 0, USB3_AXI_INT_ENA);
+}
+
+static void usb3_irq_epc_int_1_pll_wakeup(struct renesas_usb3 *usb3)
+{
+	usb3_disable_irq_1(usb3, USB_INT_1_B3_PLLWKUP);
+	usb3_clear_bit(usb3, USB30_CON_B3_PLLWAKE, USB3_USB30_CON);
+	usb3_start_usb3_connection(usb3);
+}
+
+static void usb3_irq_epc_int_1_linkup_success(struct renesas_usb3 *usb3)
+{
+	usb3_transition_to_default_state(usb3, true);
+}
+
+static void usb3_irq_epc_int_1_resume(struct renesas_usb3 *usb3)
+{
+	usb3_disable_irq_1(usb3, USB_INT_1_B2_RSUM);
+	usb3_start_usb2_connection(usb3);
+	usb3_transition_to_default_state(usb3, false);
+}
+
+static void usb3_irq_epc_int_1_suspend(struct renesas_usb3 *usb3)
+{
+	usb3_disable_irq_1(usb3, USB_INT_1_B2_SPND);
+
+	if (usb3->gadget.speed != USB_SPEED_UNKNOWN &&
+	    usb3->gadget.state != USB_STATE_NOTATTACHED) {
+		if (usb3->driver && usb3->driver->suspend)
+			usb3->driver->suspend(&usb3->gadget);
+		usb_gadget_set_state(&usb3->gadget, USB_STATE_SUSPENDED);
+	}
+}
+
+static void usb3_irq_epc_int_1_disable(struct renesas_usb3 *usb3)
+{
+	usb3_stop_usb3_connection(usb3);
+	if (usb3_wakeup_usb2_phy(usb3))
+		usb3_irq_epc_int_1_resume(usb3);
+}
+
+static void usb3_irq_epc_int_1_bus_reset(struct renesas_usb3 *usb3)
+{
+	usb3_reset_epc(usb3);
+	if (usb3->disabled_count < 3)
+		usb3_start_usb3_connection(usb3);
+	else
+		usb3_start_usb2_connection(usb3);
+}
+
+static void usb3_irq_epc_int_1_vbus_change(struct renesas_usb3 *usb3)
+{
+	usb3_check_vbus(usb3);
+}
+
+static void usb3_irq_epc_int_1_hot_reset(struct renesas_usb3 *usb3)
+{
+	usb3_reset_epc(usb3);
+	usb3_set_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON);
+
+	/* This bit shall be set within 12ms from the start of HotReset */
+	usb3_set_bit(usb3, USB30_CON_B3_HOTRST_CMP, USB3_USB30_CON);
+}
+
+static void usb3_irq_epc_int_1_warm_reset(struct renesas_usb3 *usb3)
+{
+	usb3_reset_epc(usb3);
+	usb3_set_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON);
+
+	usb3_start_operation_for_usb3(usb3);
+	usb3_enable_irq_1(usb3, USB_INT_1_SPEED);
+}
+
+static void usb3_irq_epc_int_1_speed(struct renesas_usb3 *usb3)
+{
+	u32 speed = usb3_read(usb3, USB3_USB_STA) & USB_STA_SPEED_MASK;
+
+	switch (speed) {
+	case USB_STA_SPEED_SS:
+		usb3->gadget.speed = USB_SPEED_SUPER;
+		usb3->gadget.ep0->maxpacket = USB3_EP0_SS_MAX_PACKET_SIZE;
+		break;
+	case USB_STA_SPEED_HS:
+		usb3->gadget.speed = USB_SPEED_HIGH;
+		usb3->gadget.ep0->maxpacket = USB3_EP0_HSFS_MAX_PACKET_SIZE;
+		break;
+	case USB_STA_SPEED_FS:
+		usb3->gadget.speed = USB_SPEED_FULL;
+		usb3->gadget.ep0->maxpacket = USB3_EP0_HSFS_MAX_PACKET_SIZE;
+		break;
+	default:
+		usb3->gadget.speed = USB_SPEED_UNKNOWN;
+		break;
+	}
+}
+
+static void usb3_irq_epc_int_1(struct renesas_usb3 *usb3, u32 int_sta_1)
+{
+	if (int_sta_1 & USB_INT_1_B3_PLLWKUP)
+		usb3_irq_epc_int_1_pll_wakeup(usb3);
+
+	if (int_sta_1 & USB_INT_1_B3_LUPSUCS)
+		usb3_irq_epc_int_1_linkup_success(usb3);
+
+	if (int_sta_1 & USB_INT_1_B3_HOTRST)
+		usb3_irq_epc_int_1_hot_reset(usb3);
+
+	if (int_sta_1 & USB_INT_1_B3_WRMRST)
+		usb3_irq_epc_int_1_warm_reset(usb3);
+
+	if (int_sta_1 & USB_INT_1_B3_DISABLE)
+		usb3_irq_epc_int_1_disable(usb3);
+
+	if (int_sta_1 & USB_INT_1_B2_USBRST)
+		usb3_irq_epc_int_1_bus_reset(usb3);
+
+	if (int_sta_1 & USB_INT_1_B2_RSUM)
+		usb3_irq_epc_int_1_resume(usb3);
+
+	if (int_sta_1 & USB_INT_1_B2_SPND)
+		usb3_irq_epc_int_1_suspend(usb3);
+
+	if (int_sta_1 & USB_INT_1_SPEED)
+		usb3_irq_epc_int_1_speed(usb3);
+
+	if (int_sta_1 & USB_INT_1_VBUS_CNG)
+		usb3_irq_epc_int_1_vbus_change(usb3);
+}
+
+static struct renesas_usb3_request *__usb3_get_request(struct renesas_usb3_ep
+						       *usb3_ep)
+{
+	return list_first_entry_or_null(&usb3_ep->queue,
+					struct renesas_usb3_request, queue);
+}
+
+static struct renesas_usb3_request *usb3_get_request(struct renesas_usb3_ep
+						     *usb3_ep)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	struct renesas_usb3_request *usb3_req;
+	unsigned long flags;
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	usb3_req = __usb3_get_request(usb3_ep);
+	spin_unlock_irqrestore(&usb3->lock, flags);
+
+	return usb3_req;
+}
+
+static void __usb3_request_done(struct renesas_usb3_ep *usb3_ep,
+				struct renesas_usb3_request *usb3_req,
+				int status)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+
+	dev_dbg(usb3_to_dev(usb3), "giveback: ep%2d, %u, %u, %d\n",
+		usb3_ep->num, usb3_req->req.length, usb3_req->req.actual,
+		status);
+	usb3_req->req.status = status;
+	usb3_ep->started = false;
+	list_del_init(&usb3_req->queue);
+	spin_unlock(&usb3->lock);
+	usb_gadget_giveback_request(&usb3_ep->ep, &usb3_req->req);
+	spin_lock(&usb3->lock);
+}
+
+static void usb3_request_done(struct renesas_usb3_ep *usb3_ep,
+			      struct renesas_usb3_request *usb3_req, int status)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	unsigned long flags;
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	__usb3_request_done(usb3_ep, usb3_req, status);
+	spin_unlock_irqrestore(&usb3->lock, flags);
+}
+
+static void usb3_irq_epc_pipe0_status_end(struct renesas_usb3 *usb3)
+{
+	struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0);
+	struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep);
+
+	if (usb3_req)
+		usb3_request_done(usb3_ep, usb3_req, 0);
+	if (usb3->test_mode)
+		usb3_set_test_mode(usb3);
+}
+
+static void usb3_get_setup_data(struct renesas_usb3 *usb3,
+				struct usb_ctrlrequest *ctrl)
+{
+	struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0);
+	u32 *data = (u32 *)ctrl;
+
+	*data++ = usb3_read(usb3, USB3_STUP_DAT_0);
+	*data = usb3_read(usb3, USB3_STUP_DAT_1);
+
+	/* update this driver's flag */
+	usb3_ep->dir_in = !!(ctrl->bRequestType & USB_DIR_IN);
+}
+
+static void usb3_set_p0_con_update_res(struct renesas_usb3 *usb3, u32 res)
+{
+	u32 val = usb3_read(usb3, USB3_P0_CON);
+
+	val &= ~(P0_CON_ST_RES_MASK | P0_CON_OT_RES_MASK | P0_CON_IN_RES_MASK);
+	val |= res | P0_CON_RES_WEN;
+	usb3_write(usb3, val, USB3_P0_CON);
+}
+
+static void usb3_set_p0_con_for_ctrl_read_data(struct renesas_usb3 *usb3)
+{
+	usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_FORCE_NRDY |
+				   P0_CON_OT_RES_FORCE_STALL |
+				   P0_CON_IN_RES_NORMAL);
+}
+
+static void usb3_set_p0_con_for_ctrl_read_status(struct renesas_usb3 *usb3)
+{
+	usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_NORMAL |
+				   P0_CON_OT_RES_FORCE_STALL |
+				   P0_CON_IN_RES_NORMAL);
+}
+
+static void usb3_set_p0_con_for_ctrl_write_data(struct renesas_usb3 *usb3)
+{
+	usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_FORCE_NRDY |
+				   P0_CON_OT_RES_NORMAL |
+				   P0_CON_IN_RES_FORCE_STALL);
+}
+
+static void usb3_set_p0_con_for_ctrl_write_status(struct renesas_usb3 *usb3)
+{
+	usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_NORMAL |
+				   P0_CON_OT_RES_NORMAL |
+				   P0_CON_IN_RES_FORCE_STALL);
+}
+
+static void usb3_set_p0_con_for_no_data(struct renesas_usb3 *usb3)
+{
+	usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_NORMAL |
+				   P0_CON_OT_RES_FORCE_STALL |
+				   P0_CON_IN_RES_FORCE_STALL);
+}
+
+static void usb3_set_p0_con_stall(struct renesas_usb3 *usb3)
+{
+	usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_FORCE_STALL |
+				   P0_CON_OT_RES_FORCE_STALL |
+				   P0_CON_IN_RES_FORCE_STALL);
+}
+
+static void usb3_set_p0_con_stop(struct renesas_usb3 *usb3)
+{
+	usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_FORCE_NRDY |
+				   P0_CON_OT_RES_FORCE_NRDY |
+				   P0_CON_IN_RES_FORCE_NRDY);
+}
+
+static int usb3_pn_change(struct renesas_usb3 *usb3, int num)
+{
+	if (num == 0 || num > usb3->num_usb3_eps)
+		return -ENXIO;
+
+	usb3_write(usb3, num, USB3_PIPE_COM);
+
+	return 0;
+}
+
+static void usb3_set_pn_con_update_res(struct renesas_usb3 *usb3, u32 res)
+{
+	u32 val = usb3_read(usb3, USB3_PN_CON);
+
+	val &= ~PN_CON_RES_MASK;
+	val |= res & PN_CON_RES_MASK;
+	val |= PN_CON_RES_WEN;
+	usb3_write(usb3, val, USB3_PN_CON);
+}
+
+static void usb3_pn_start(struct renesas_usb3 *usb3)
+{
+	usb3_set_pn_con_update_res(usb3, PN_CON_RES_NORMAL);
+}
+
+static void usb3_pn_stop(struct renesas_usb3 *usb3)
+{
+	usb3_set_pn_con_update_res(usb3, PN_CON_RES_FORCE_NRDY);
+}
+
+static void usb3_pn_stall(struct renesas_usb3 *usb3)
+{
+	usb3_set_pn_con_update_res(usb3, PN_CON_RES_FORCE_STALL);
+}
+
+static int usb3_pn_con_clear(struct renesas_usb3 *usb3)
+{
+	usb3_set_bit(usb3, PN_CON_CLR, USB3_PN_CON);
+
+	return usb3_wait(usb3, USB3_PN_CON, PN_CON_CLR, 0);
+}
+
+static bool usb3_is_transfer_complete(struct renesas_usb3_ep *usb3_ep,
+				      struct renesas_usb3_request *usb3_req)
+{
+	struct usb_request *req = &usb3_req->req;
+
+	if ((!req->zero && req->actual == req->length) ||
+	    (req->actual % usb3_ep->ep.maxpacket) || (req->length == 0))
+		return true;
+	else
+		return false;
+}
+
+static int usb3_wait_pipe_status(struct renesas_usb3_ep *usb3_ep, u32 mask)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	u32 sta_reg = usb3_ep->num ? USB3_PN_STA : USB3_P0_STA;
+
+	return usb3_wait(usb3, sta_reg, mask, mask);
+}
+
+static void usb3_set_px_con_send(struct renesas_usb3_ep *usb3_ep, int bytes,
+				 bool last)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	u32 con_reg = usb3_ep->num ? USB3_PN_CON : USB3_P0_CON;
+	u32 val = usb3_read(usb3, con_reg);
+
+	val |= PX_CON_SEND | PX_CON_BYTE_EN_BYTES(bytes);
+	val |= (usb3_ep->num && last) ? PN_CON_LAST : 0;
+	usb3_write(usb3, val, con_reg);
+}
+
+static int usb3_write_pipe(struct renesas_usb3_ep *usb3_ep,
+			   struct renesas_usb3_request *usb3_req,
+			   u32 fifo_reg)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	int i;
+	int len = min_t(unsigned, usb3_req->req.length - usb3_req->req.actual,
+			usb3_ep->ep.maxpacket);
+	u8 *buf = usb3_req->req.buf + usb3_req->req.actual;
+	u32 tmp = 0;
+	bool is_last = !len ? true : false;
+
+	if (usb3_wait_pipe_status(usb3_ep, PX_STA_BUFSTS) < 0)
+		return -EBUSY;
+
+	/* Update gadget driver parameter */
+	usb3_req->req.actual += len;
+
+	/* Write data to the register */
+	if (len >= 4) {
+		iowrite32_rep(usb3->reg + fifo_reg, buf, len / 4);
+		buf += (len / 4) * 4;
+		len %= 4;	/* update len to use usb3_set_pX_con_send() */
+	}
+
+	if (len) {
+		for (i = 0; i < len; i++)
+			tmp |= buf[i] << (8 * i);
+		usb3_write(usb3, tmp, fifo_reg);
+	}
+
+	if (!is_last)
+		is_last = usb3_is_transfer_complete(usb3_ep, usb3_req);
+	/* Send the data */
+	usb3_set_px_con_send(usb3_ep, len, is_last);
+
+	return is_last ? 0 : -EAGAIN;
+}
+
+static u32 usb3_get_received_length(struct renesas_usb3_ep *usb3_ep)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	u32 lng_reg = usb3_ep->num ? USB3_PN_LNG : USB3_P0_LNG;
+
+	return usb3_read(usb3, lng_reg);
+}
+
+static int usb3_read_pipe(struct renesas_usb3_ep *usb3_ep,
+			  struct renesas_usb3_request *usb3_req, u32 fifo_reg)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	int i;
+	int len = min_t(unsigned, usb3_req->req.length - usb3_req->req.actual,
+			usb3_get_received_length(usb3_ep));
+	u8 *buf = usb3_req->req.buf + usb3_req->req.actual;
+	u32 tmp = 0;
+
+	if (!len)
+		return 0;
+
+	/* Update gadget driver parameter */
+	usb3_req->req.actual += len;
+
+	/* Read data from the register */
+	if (len >= 4) {
+		ioread32_rep(usb3->reg + fifo_reg, buf, len / 4);
+		buf += (len / 4) * 4;
+		len %= 4;
+	}
+
+	if (len) {
+		tmp = usb3_read(usb3, fifo_reg);
+		for (i = 0; i < len; i++)
+			buf[i] = (tmp >> (8 * i)) & 0xff;
+	}
+
+	return usb3_is_transfer_complete(usb3_ep, usb3_req) ? 0 : -EAGAIN;
+}
+
+static void usb3_set_status_stage(struct renesas_usb3_ep *usb3_ep,
+				  struct renesas_usb3_request *usb3_req)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+
+	if (usb3_ep->dir_in) {
+		usb3_set_p0_con_for_ctrl_read_status(usb3);
+	} else {
+		if (!usb3_req->req.length)
+			usb3_set_p0_con_for_no_data(usb3);
+		else
+			usb3_set_p0_con_for_ctrl_write_status(usb3);
+	}
+}
+
+static void usb3_p0_xfer(struct renesas_usb3_ep *usb3_ep,
+			 struct renesas_usb3_request *usb3_req)
+{
+	int ret;
+
+	if (usb3_ep->dir_in)
+		ret = usb3_write_pipe(usb3_ep, usb3_req, USB3_P0_WRITE);
+	else
+		ret = usb3_read_pipe(usb3_ep, usb3_req, USB3_P0_READ);
+
+	if (!ret)
+		usb3_set_status_stage(usb3_ep, usb3_req);
+}
+
+static void usb3_start_pipe0(struct renesas_usb3_ep *usb3_ep,
+			     struct renesas_usb3_request *usb3_req)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+
+	if (usb3_ep->started)
+		return;
+
+	usb3_ep->started = true;
+
+	if (usb3_ep->dir_in) {
+		usb3_set_bit(usb3, P0_MOD_DIR, USB3_P0_MOD);
+		usb3_set_p0_con_for_ctrl_read_data(usb3);
+	} else {
+		usb3_clear_bit(usb3, P0_MOD_DIR, USB3_P0_MOD);
+		if (usb3_req->req.length)
+			usb3_set_p0_con_for_ctrl_write_data(usb3);
+	}
+
+	usb3_p0_xfer(usb3_ep, usb3_req);
+}
+
+static void usb3_enable_dma_pipen(struct renesas_usb3 *usb3)
+{
+	usb3_set_bit(usb3, PN_CON_DATAIF_EN, USB3_PN_CON);
+}
+
+static void usb3_disable_dma_pipen(struct renesas_usb3 *usb3)
+{
+	usb3_clear_bit(usb3, PN_CON_DATAIF_EN, USB3_PN_CON);
+}
+
+static void usb3_enable_dma_irq(struct renesas_usb3 *usb3, int num)
+{
+	usb3_set_bit(usb3, DMA_INT(num), USB3_DMA_INT_ENA);
+}
+
+static void usb3_disable_dma_irq(struct renesas_usb3 *usb3, int num)
+{
+	usb3_clear_bit(usb3, DMA_INT(num), USB3_DMA_INT_ENA);
+}
+
+static u32 usb3_dma_mps_to_prd_word1(struct renesas_usb3_ep *usb3_ep)
+{
+	switch (usb3_ep->ep.maxpacket) {
+	case 8:
+		return USB3_PRD1_MPS_8;
+	case 16:
+		return USB3_PRD1_MPS_16;
+	case 32:
+		return USB3_PRD1_MPS_32;
+	case 64:
+		return USB3_PRD1_MPS_64;
+	case 512:
+		return USB3_PRD1_MPS_512;
+	case 1024:
+		return USB3_PRD1_MPS_1024;
+	default:
+		return USB3_PRD1_MPS_RESERVED;
+	}
+}
+
+static bool usb3_dma_get_setting_area(struct renesas_usb3_ep *usb3_ep,
+				      struct renesas_usb3_request *usb3_req)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	struct renesas_usb3_dma *dma;
+	int i;
+	bool ret = false;
+
+	if (usb3_req->req.length > USB3_DMA_MAX_XFER_SIZE_ALL_PRDS) {
+		dev_dbg(usb3_to_dev(usb3), "%s: the length is too big (%d)\n",
+			__func__, usb3_req->req.length);
+		return false;
+	}
+
+	/* The driver doesn't handle zero-length packet via dmac */
+	if (!usb3_req->req.length)
+		return false;
+
+	if (usb3_dma_mps_to_prd_word1(usb3_ep) == USB3_PRD1_MPS_RESERVED)
+		return false;
+
+	usb3_for_each_dma(usb3, dma, i) {
+		if (dma->used)
+			continue;
+
+		if (usb_gadget_map_request(&usb3->gadget, &usb3_req->req,
+					   usb3_ep->dir_in) < 0)
+			break;
+
+		dma->used = true;
+		usb3_ep->dma = dma;
+		ret = true;
+		break;
+	}
+
+	return ret;
+}
+
+static void usb3_dma_put_setting_area(struct renesas_usb3_ep *usb3_ep,
+				      struct renesas_usb3_request *usb3_req)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	int i;
+	struct renesas_usb3_dma *dma;
+
+	usb3_for_each_dma(usb3, dma, i) {
+		if (usb3_ep->dma == dma) {
+			usb_gadget_unmap_request(&usb3->gadget, &usb3_req->req,
+						 usb3_ep->dir_in);
+			dma->used = false;
+			usb3_ep->dma = NULL;
+			break;
+		}
+	}
+}
+
+static void usb3_dma_fill_prd(struct renesas_usb3_ep *usb3_ep,
+			      struct renesas_usb3_request *usb3_req)
+{
+	struct renesas_usb3_prd *cur_prd = usb3_ep->dma->prd;
+	u32 remain = usb3_req->req.length;
+	u32 dma = usb3_req->req.dma;
+	u32 len;
+	int i = 0;
+
+	do {
+		len = min_t(u32, remain, USB3_DMA_MAX_XFER_SIZE) &
+			    USB3_PRD1_SIZE_MASK;
+		cur_prd->word1 = usb3_dma_mps_to_prd_word1(usb3_ep) |
+				 USB3_PRD1_B_INC | len;
+		cur_prd->bap = dma;
+		remain -= len;
+		dma += len;
+		if (!remain || (i + 1) < USB3_DMA_NUM_PRD_ENTRIES)
+			break;
+
+		cur_prd++;
+		i++;
+	} while (1);
+
+	cur_prd->word1 |= USB3_PRD1_E | USB3_PRD1_INT;
+	if (usb3_ep->dir_in)
+		cur_prd->word1 |= USB3_PRD1_LST;
+}
+
+static void usb3_dma_kick_prd(struct renesas_usb3_ep *usb3_ep)
+{
+	struct renesas_usb3_dma *dma = usb3_ep->dma;
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	u32 dma_con = DMA_COM_PIPE_NO(usb3_ep->num) | DMA_CON_PRD_EN;
+
+	if (usb3_ep->dir_in)
+		dma_con |= DMA_CON_PIPE_DIR;
+
+	wmb();	/* prd entries should be in system memory here */
+
+	usb3_write(usb3, 1 << usb3_ep->num, USB3_DMA_INT_STA);
+	usb3_write(usb3, AXI_INT_PRDEN_CLR_STA(dma->num) |
+		   AXI_INT_PRDERR_STA(dma->num), USB3_AXI_INT_STA);
+
+	usb3_write(usb3, dma->prd_dma, USB3_DMA_CH0_PRD_ADR(dma->num));
+	usb3_write(usb3, dma_con, USB3_DMA_CH0_CON(dma->num));
+	usb3_enable_dma_irq(usb3, usb3_ep->num);
+}
+
+static void usb3_dma_stop_prd(struct renesas_usb3_ep *usb3_ep)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	struct renesas_usb3_dma *dma = usb3_ep->dma;
+
+	usb3_disable_dma_irq(usb3, usb3_ep->num);
+	usb3_write(usb3, 0, USB3_DMA_CH0_CON(dma->num));
+}
+
+static int usb3_dma_update_status(struct renesas_usb3_ep *usb3_ep,
+				  struct renesas_usb3_request *usb3_req)
+{
+	struct renesas_usb3_prd *cur_prd = usb3_ep->dma->prd;
+	struct usb_request *req = &usb3_req->req;
+	u32 remain, len;
+	int i = 0;
+	int status = 0;
+
+	rmb();	/* The controller updated prd entries */
+
+	do {
+		if (cur_prd->word1 & USB3_PRD1_D)
+			status = -EIO;
+		if (cur_prd->word1 & USB3_PRD1_E)
+			len = req->length % USB3_DMA_MAX_XFER_SIZE;
+		else
+			len = USB3_DMA_MAX_XFER_SIZE;
+		remain = cur_prd->word1 & USB3_PRD1_SIZE_MASK;
+		req->actual += len - remain;
+
+		if (cur_prd->word1 & USB3_PRD1_E ||
+		    (i + 1) < USB3_DMA_NUM_PRD_ENTRIES)
+			break;
+
+		cur_prd++;
+		i++;
+	} while (1);
+
+	return status;
+}
+
+static bool usb3_dma_try_start(struct renesas_usb3_ep *usb3_ep,
+			       struct renesas_usb3_request *usb3_req)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+
+	if (!use_dma)
+		return false;
+
+	if (usb3_dma_get_setting_area(usb3_ep, usb3_req)) {
+		usb3_pn_stop(usb3);
+		usb3_enable_dma_pipen(usb3);
+		usb3_dma_fill_prd(usb3_ep, usb3_req);
+		usb3_dma_kick_prd(usb3_ep);
+		usb3_pn_start(usb3);
+		return true;
+	}
+
+	return false;
+}
+
+static int usb3_dma_try_stop(struct renesas_usb3_ep *usb3_ep,
+			     struct renesas_usb3_request *usb3_req)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	unsigned long flags;
+	int status = 0;
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	if (!usb3_ep->dma)
+		goto out;
+
+	if (!usb3_pn_change(usb3, usb3_ep->num))
+		usb3_disable_dma_pipen(usb3);
+	usb3_dma_stop_prd(usb3_ep);
+	status = usb3_dma_update_status(usb3_ep, usb3_req);
+	usb3_dma_put_setting_area(usb3_ep, usb3_req);
+
+out:
+	spin_unlock_irqrestore(&usb3->lock, flags);
+	return status;
+}
+
+static int renesas_usb3_dma_free_prd(struct renesas_usb3 *usb3,
+				     struct device *dev)
+{
+	int i;
+	struct renesas_usb3_dma *dma;
+
+	usb3_for_each_dma(usb3, dma, i) {
+		if (dma->prd) {
+			dma_free_coherent(dev, USB3_DMA_PRD_SIZE,
+					  dma->prd, dma->prd_dma);
+			dma->prd = NULL;
+		}
+	}
+
+	return 0;
+}
+
+static int renesas_usb3_dma_alloc_prd(struct renesas_usb3 *usb3,
+				      struct device *dev)
+{
+	int i;
+	struct renesas_usb3_dma *dma;
+
+	if (!use_dma)
+		return 0;
+
+	usb3_for_each_dma(usb3, dma, i) {
+		dma->prd = dma_alloc_coherent(dev, USB3_DMA_PRD_SIZE,
+					      &dma->prd_dma, GFP_KERNEL);
+		if (!dma->prd) {
+			renesas_usb3_dma_free_prd(usb3, dev);
+			return -ENOMEM;
+		}
+		dma->num = i + 1;
+	}
+
+	return 0;
+}
+
+static void usb3_start_pipen(struct renesas_usb3_ep *usb3_ep,
+			     struct renesas_usb3_request *usb3_req)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	struct renesas_usb3_request *usb3_req_first;
+	unsigned long flags;
+	int ret = -EAGAIN;
+	u32 enable_bits = 0;
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	if (usb3_ep->halt || usb3_ep->started)
+		goto out;
+	usb3_req_first = __usb3_get_request(usb3_ep);
+	if (!usb3_req_first || usb3_req != usb3_req_first)
+		goto out;
+
+	if (usb3_pn_change(usb3, usb3_ep->num) < 0)
+		goto out;
+
+	usb3_ep->started = true;
+
+	if (usb3_dma_try_start(usb3_ep, usb3_req))
+		goto out;
+
+	usb3_pn_start(usb3);
+
+	if (usb3_ep->dir_in) {
+		ret = usb3_write_pipe(usb3_ep, usb3_req, USB3_PN_WRITE);
+		enable_bits |= PN_INT_LSTTR;
+	}
+
+	if (ret < 0)
+		enable_bits |= PN_INT_BFRDY;
+
+	if (enable_bits) {
+		usb3_set_bit(usb3, enable_bits, USB3_PN_INT_ENA);
+		usb3_enable_pipe_irq(usb3, usb3_ep->num);
+	}
+out:
+	spin_unlock_irqrestore(&usb3->lock, flags);
+}
+
+static int renesas_usb3_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+				 gfp_t gfp_flags)
+{
+	struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep);
+	struct renesas_usb3_request *usb3_req = usb_req_to_usb3_req(_req);
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	unsigned long flags;
+
+	dev_dbg(usb3_to_dev(usb3), "ep_queue: ep%2d, %u\n", usb3_ep->num,
+		_req->length);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+	spin_lock_irqsave(&usb3->lock, flags);
+	list_add_tail(&usb3_req->queue, &usb3_ep->queue);
+	spin_unlock_irqrestore(&usb3->lock, flags);
+
+	if (!usb3_ep->num)
+		usb3_start_pipe0(usb3_ep, usb3_req);
+	else
+		usb3_start_pipen(usb3_ep, usb3_req);
+
+	return 0;
+}
+
+static void usb3_set_device_address(struct renesas_usb3 *usb3, u16 addr)
+{
+	/* DEV_ADDR bit field is cleared by WarmReset, HotReset and BusReset */
+	usb3_set_bit(usb3, USB_COM_CON_DEV_ADDR(addr), USB3_USB_COM_CON);
+}
+
+static bool usb3_std_req_set_address(struct renesas_usb3 *usb3,
+				     struct usb_ctrlrequest *ctrl)
+{
+	if (le16_to_cpu(ctrl->wValue) >= 128)
+		return true;	/* stall */
+
+	usb3_set_device_address(usb3, le16_to_cpu(ctrl->wValue));
+	usb3_set_p0_con_for_no_data(usb3);
+
+	return false;
+}
+
+static void usb3_pipe0_internal_xfer(struct renesas_usb3 *usb3,
+				     void *tx_data, size_t len,
+				     void (*complete)(struct usb_ep *ep,
+						      struct usb_request *req))
+{
+	struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0);
+
+	if (tx_data)
+		memcpy(usb3->ep0_buf, tx_data,
+		       min_t(size_t, len, USB3_EP0_BUF_SIZE));
+
+	usb3->ep0_req->buf = &usb3->ep0_buf;
+	usb3->ep0_req->length = len;
+	usb3->ep0_req->complete = complete;
+	renesas_usb3_ep_queue(&usb3_ep->ep, usb3->ep0_req, GFP_ATOMIC);
+}
+
+static void usb3_pipe0_get_status_completion(struct usb_ep *ep,
+					     struct usb_request *req)
+{
+}
+
+static bool usb3_std_req_get_status(struct renesas_usb3 *usb3,
+				    struct usb_ctrlrequest *ctrl)
+{
+	bool stall = false;
+	struct renesas_usb3_ep *usb3_ep;
+	int num;
+	u16 status = 0;
+	__le16 tx_data;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		if (usb3->gadget.is_selfpowered)
+			status |= 1 << USB_DEVICE_SELF_POWERED;
+		if (usb3->gadget.speed == USB_SPEED_SUPER)
+			status |= usb3_feature_get_un_enabled(usb3);
+		break;
+	case USB_RECIP_INTERFACE:
+		break;
+	case USB_RECIP_ENDPOINT:
+		num = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK;
+		usb3_ep = usb3_get_ep(usb3, num);
+		if (usb3_ep->halt)
+			status |= 1 << USB_ENDPOINT_HALT;
+		break;
+	default:
+		stall = true;
+		break;
+	}
+
+	if (!stall) {
+		tx_data = cpu_to_le16(status);
+		dev_dbg(usb3_to_dev(usb3), "get_status: req = %p\n",
+			usb_req_to_usb3_req(usb3->ep0_req));
+		usb3_pipe0_internal_xfer(usb3, &tx_data, sizeof(tx_data),
+					 usb3_pipe0_get_status_completion);
+	}
+
+	return stall;
+}
+
+static bool usb3_std_req_feature_device(struct renesas_usb3 *usb3,
+					struct usb_ctrlrequest *ctrl, bool set)
+{
+	bool stall = true;
+	u16 w_value = le16_to_cpu(ctrl->wValue);
+
+	switch (w_value) {
+	case USB_DEVICE_TEST_MODE:
+		if (!set)
+			break;
+		usb3->test_mode = le16_to_cpu(ctrl->wIndex) >> 8;
+		stall = false;
+		break;
+	case USB_DEVICE_U1_ENABLE:
+	case USB_DEVICE_U2_ENABLE:
+		if (usb3->gadget.speed != USB_SPEED_SUPER)
+			break;
+		if (w_value == USB_DEVICE_U1_ENABLE)
+			usb3_feature_u1_enable(usb3, set);
+		if (w_value == USB_DEVICE_U2_ENABLE)
+			usb3_feature_u2_enable(usb3, set);
+		stall = false;
+		break;
+	default:
+		break;
+	}
+
+	return stall;
+}
+
+static int usb3_set_halt_p0(struct renesas_usb3_ep *usb3_ep, bool halt)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+
+	if (unlikely(usb3_ep->num))
+		return -EINVAL;
+
+	usb3_ep->halt = halt;
+	if (halt)
+		usb3_set_p0_con_stall(usb3);
+	else
+		usb3_set_p0_con_stop(usb3);
+
+	return 0;
+}
+
+static int usb3_set_halt_pn(struct renesas_usb3_ep *usb3_ep, bool halt,
+			    bool is_clear_feature)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	unsigned long flags;
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	if (!usb3_pn_change(usb3, usb3_ep->num)) {
+		usb3_ep->halt = halt;
+		if (halt) {
+			usb3_pn_stall(usb3);
+		} else if (!is_clear_feature || !usb3_ep->wedge) {
+			usb3_pn_con_clear(usb3);
+			usb3_set_bit(usb3, PN_CON_EN, USB3_PN_CON);
+			usb3_pn_stop(usb3);
+		}
+	}
+	spin_unlock_irqrestore(&usb3->lock, flags);
+
+	return 0;
+}
+
+static int usb3_set_halt(struct renesas_usb3_ep *usb3_ep, bool halt,
+			 bool is_clear_feature)
+{
+	int ret = 0;
+
+	if (halt && usb3_ep->started)
+		return -EAGAIN;
+
+	if (usb3_ep->num)
+		ret = usb3_set_halt_pn(usb3_ep, halt, is_clear_feature);
+	else
+		ret = usb3_set_halt_p0(usb3_ep, halt);
+
+	return ret;
+}
+
+static bool usb3_std_req_feature_endpoint(struct renesas_usb3 *usb3,
+					  struct usb_ctrlrequest *ctrl,
+					  bool set)
+{
+	int num = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK;
+	struct renesas_usb3_ep *usb3_ep;
+	struct renesas_usb3_request *usb3_req;
+
+	if (le16_to_cpu(ctrl->wValue) != USB_ENDPOINT_HALT)
+		return true;	/* stall */
+
+	usb3_ep = usb3_get_ep(usb3, num);
+	usb3_set_halt(usb3_ep, set, true);
+
+	/* Restarts a queue if clear feature */
+	if (!set) {
+		usb3_ep->started = false;
+		usb3_req = usb3_get_request(usb3_ep);
+		if (usb3_req)
+			usb3_start_pipen(usb3_ep, usb3_req);
+	}
+
+	return false;
+}
+
+static bool usb3_std_req_feature(struct renesas_usb3 *usb3,
+				 struct usb_ctrlrequest *ctrl, bool set)
+{
+	bool stall = false;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		stall = usb3_std_req_feature_device(usb3, ctrl, set);
+		break;
+	case USB_RECIP_INTERFACE:
+		break;
+	case USB_RECIP_ENDPOINT:
+		stall = usb3_std_req_feature_endpoint(usb3, ctrl, set);
+		break;
+	default:
+		stall = true;
+		break;
+	}
+
+	if (!stall)
+		usb3_set_p0_con_for_no_data(usb3);
+
+	return stall;
+}
+
+static void usb3_pipe0_set_sel_completion(struct usb_ep *ep,
+					  struct usb_request *req)
+{
+	/* TODO */
+}
+
+static bool usb3_std_req_set_sel(struct renesas_usb3 *usb3,
+				 struct usb_ctrlrequest *ctrl)
+{
+	u16 w_length = le16_to_cpu(ctrl->wLength);
+
+	if (w_length != 6)
+		return true;	/* stall */
+
+	dev_dbg(usb3_to_dev(usb3), "set_sel: req = %p\n",
+		usb_req_to_usb3_req(usb3->ep0_req));
+	usb3_pipe0_internal_xfer(usb3, NULL, 6, usb3_pipe0_set_sel_completion);
+
+	return false;
+}
+
+static bool usb3_std_req_set_configuration(struct renesas_usb3 *usb3,
+					   struct usb_ctrlrequest *ctrl)
+{
+	if (le16_to_cpu(ctrl->wValue) > 0)
+		usb3_set_bit(usb3, USB_COM_CON_CONF, USB3_USB_COM_CON);
+	else
+		usb3_clear_bit(usb3, USB_COM_CON_CONF, USB3_USB_COM_CON);
+
+	return false;
+}
+
+/**
+ * usb3_handle_standard_request - handle some standard requests
+ * @usb3: the renesas_usb3 pointer
+ * @ctrl: a pointer of setup data
+ *
+ * Returns true if this function handled a standard request
+ */
+static bool usb3_handle_standard_request(struct renesas_usb3 *usb3,
+					 struct usb_ctrlrequest *ctrl)
+{
+	bool ret = false;
+	bool stall = false;
+
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (ctrl->bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			stall = usb3_std_req_set_address(usb3, ctrl);
+			ret = true;
+			break;
+		case USB_REQ_GET_STATUS:
+			stall = usb3_std_req_get_status(usb3, ctrl);
+			ret = true;
+			break;
+		case USB_REQ_CLEAR_FEATURE:
+			stall = usb3_std_req_feature(usb3, ctrl, false);
+			ret = true;
+			break;
+		case USB_REQ_SET_FEATURE:
+			stall = usb3_std_req_feature(usb3, ctrl, true);
+			ret = true;
+			break;
+		case USB_REQ_SET_SEL:
+			stall = usb3_std_req_set_sel(usb3, ctrl);
+			ret = true;
+			break;
+		case USB_REQ_SET_ISOCH_DELAY:
+			/* This hardware doesn't support Isochronous xfer */
+			stall = true;
+			ret = true;
+			break;
+		case USB_REQ_SET_CONFIGURATION:
+			usb3_std_req_set_configuration(usb3, ctrl);
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (stall)
+		usb3_set_p0_con_stall(usb3);
+
+	return ret;
+}
+
+static int usb3_p0_con_clear_buffer(struct renesas_usb3 *usb3)
+{
+	usb3_set_bit(usb3, P0_CON_BCLR, USB3_P0_CON);
+
+	return usb3_wait(usb3, USB3_P0_CON, P0_CON_BCLR, 0);
+}
+
+static void usb3_irq_epc_pipe0_setup(struct renesas_usb3 *usb3)
+{
+	struct usb_ctrlrequest ctrl;
+	struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0);
+
+	/* Call giveback function if previous transfer is not completed */
+	if (usb3_ep->started)
+		usb3_request_done(usb3_ep, usb3_get_request(usb3_ep),
+				  -ECONNRESET);
+
+	usb3_p0_con_clear_buffer(usb3);
+	usb3_get_setup_data(usb3, &ctrl);
+	if (!usb3_handle_standard_request(usb3, &ctrl))
+		if (usb3->driver->setup(&usb3->gadget, &ctrl) < 0)
+			usb3_set_p0_con_stall(usb3);
+}
+
+static void usb3_irq_epc_pipe0_bfrdy(struct renesas_usb3 *usb3)
+{
+	struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0);
+	struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep);
+
+	if (!usb3_req)
+		return;
+
+	usb3_p0_xfer(usb3_ep, usb3_req);
+}
+
+static void usb3_irq_epc_pipe0(struct renesas_usb3 *usb3)
+{
+	u32 p0_int_sta = usb3_read(usb3, USB3_P0_INT_STA);
+
+	p0_int_sta &= usb3_read(usb3, USB3_P0_INT_ENA);
+	usb3_write(usb3, p0_int_sta, USB3_P0_INT_STA);
+	if (p0_int_sta & P0_INT_STSED)
+		usb3_irq_epc_pipe0_status_end(usb3);
+	if (p0_int_sta & P0_INT_SETUP)
+		usb3_irq_epc_pipe0_setup(usb3);
+	if (p0_int_sta & P0_INT_BFRDY)
+		usb3_irq_epc_pipe0_bfrdy(usb3);
+}
+
+static void usb3_request_done_pipen(struct renesas_usb3 *usb3,
+				    struct renesas_usb3_ep *usb3_ep,
+				    struct renesas_usb3_request *usb3_req,
+				    int status)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	if (usb3_pn_change(usb3, usb3_ep->num))
+		usb3_pn_stop(usb3);
+	spin_unlock_irqrestore(&usb3->lock, flags);
+
+	usb3_disable_pipe_irq(usb3, usb3_ep->num);
+	usb3_request_done(usb3_ep, usb3_req, status);
+
+	/* get next usb3_req */
+	usb3_req = usb3_get_request(usb3_ep);
+	if (usb3_req)
+		usb3_start_pipen(usb3_ep, usb3_req);
+}
+
+static void usb3_irq_epc_pipen_lsttr(struct renesas_usb3 *usb3, int num)
+{
+	struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, num);
+	struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep);
+
+	if (!usb3_req)
+		return;
+
+	if (usb3_ep->dir_in) {
+		dev_dbg(usb3_to_dev(usb3), "%s: len = %u, actual = %u\n",
+			__func__, usb3_req->req.length, usb3_req->req.actual);
+		usb3_request_done_pipen(usb3, usb3_ep, usb3_req, 0);
+	}
+}
+
+static void usb3_irq_epc_pipen_bfrdy(struct renesas_usb3 *usb3, int num)
+{
+	struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, num);
+	struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep);
+	bool done = false;
+
+	if (!usb3_req)
+		return;
+
+	spin_lock(&usb3->lock);
+	if (usb3_pn_change(usb3, num))
+		goto out;
+
+	if (usb3_ep->dir_in) {
+		/* Do not stop the IN pipe here to detect LSTTR interrupt */
+		if (!usb3_write_pipe(usb3_ep, usb3_req, USB3_PN_WRITE))
+			usb3_clear_bit(usb3, PN_INT_BFRDY, USB3_PN_INT_ENA);
+	} else {
+		if (!usb3_read_pipe(usb3_ep, usb3_req, USB3_PN_READ))
+			done = true;
+	}
+
+out:
+	/* need to unlock because usb3_request_done_pipen() locks it */
+	spin_unlock(&usb3->lock);
+
+	if (done)
+		usb3_request_done_pipen(usb3, usb3_ep, usb3_req, 0);
+}
+
+static void usb3_irq_epc_pipen(struct renesas_usb3 *usb3, int num)
+{
+	u32 pn_int_sta;
+
+	spin_lock(&usb3->lock);
+	if (usb3_pn_change(usb3, num) < 0) {
+		spin_unlock(&usb3->lock);
+		return;
+	}
+
+	pn_int_sta = usb3_read(usb3, USB3_PN_INT_STA);
+	pn_int_sta &= usb3_read(usb3, USB3_PN_INT_ENA);
+	usb3_write(usb3, pn_int_sta, USB3_PN_INT_STA);
+	spin_unlock(&usb3->lock);
+	if (pn_int_sta & PN_INT_LSTTR)
+		usb3_irq_epc_pipen_lsttr(usb3, num);
+	if (pn_int_sta & PN_INT_BFRDY)
+		usb3_irq_epc_pipen_bfrdy(usb3, num);
+}
+
+static void usb3_irq_epc_int_2(struct renesas_usb3 *usb3, u32 int_sta_2)
+{
+	int i;
+
+	for (i = 0; i < usb3->num_usb3_eps; i++) {
+		if (int_sta_2 & USB_INT_2_PIPE(i)) {
+			if (!i)
+				usb3_irq_epc_pipe0(usb3);
+			else
+				usb3_irq_epc_pipen(usb3, i);
+		}
+	}
+}
+
+static void usb3_irq_idmon_change(struct renesas_usb3 *usb3)
+{
+	usb3_check_id(usb3);
+}
+
+static void usb3_irq_otg_int(struct renesas_usb3 *usb3)
+{
+	u32 otg_int_sta = usb3_read(usb3, USB3_USB_OTG_INT_STA(usb3));
+
+	otg_int_sta &= usb3_read(usb3, USB3_USB_OTG_INT_ENA(usb3));
+	if (otg_int_sta)
+		usb3_write(usb3, otg_int_sta, USB3_USB_OTG_INT_STA(usb3));
+
+	if (otg_int_sta & USB_OTG_IDMON(usb3))
+		usb3_irq_idmon_change(usb3);
+}
+
+static void usb3_irq_epc(struct renesas_usb3 *usb3)
+{
+	u32 int_sta_1 = usb3_read(usb3, USB3_USB_INT_STA_1);
+	u32 int_sta_2 = usb3_read(usb3, USB3_USB_INT_STA_2);
+
+	int_sta_1 &= usb3_read(usb3, USB3_USB_INT_ENA_1);
+	if (int_sta_1) {
+		usb3_write(usb3, int_sta_1, USB3_USB_INT_STA_1);
+		usb3_irq_epc_int_1(usb3, int_sta_1);
+	}
+
+	int_sta_2 &= usb3_read(usb3, USB3_USB_INT_ENA_2);
+	if (int_sta_2)
+		usb3_irq_epc_int_2(usb3, int_sta_2);
+
+	if (!usb3->is_rzv2m)
+		usb3_irq_otg_int(usb3);
+}
+
+static void usb3_irq_dma_int(struct renesas_usb3 *usb3, u32 dma_sta)
+{
+	struct renesas_usb3_ep *usb3_ep;
+	struct renesas_usb3_request *usb3_req;
+	int i, status;
+
+	for (i = 0; i < usb3->num_usb3_eps; i++) {
+		if (!(dma_sta & DMA_INT(i)))
+			continue;
+
+		usb3_ep = usb3_get_ep(usb3, i);
+		if (!(usb3_read(usb3, USB3_AXI_INT_STA) &
+		    AXI_INT_PRDEN_CLR_STA(usb3_ep->dma->num)))
+			continue;
+
+		usb3_req = usb3_get_request(usb3_ep);
+		status = usb3_dma_try_stop(usb3_ep, usb3_req);
+		usb3_request_done_pipen(usb3, usb3_ep, usb3_req, status);
+	}
+}
+
+static void usb3_irq_dma(struct renesas_usb3 *usb3)
+{
+	u32 dma_sta = usb3_read(usb3, USB3_DMA_INT_STA);
+
+	dma_sta &= usb3_read(usb3, USB3_DMA_INT_ENA);
+	if (dma_sta) {
+		usb3_write(usb3, dma_sta, USB3_DMA_INT_STA);
+		usb3_irq_dma_int(usb3, dma_sta);
+	}
+}
+
+static irqreturn_t renesas_usb3_irq(int irq, void *_usb3)
+{
+	struct renesas_usb3 *usb3 = _usb3;
+	irqreturn_t ret = IRQ_NONE;
+	u32 axi_int_sta = usb3_read(usb3, USB3_AXI_INT_STA);
+
+	if (axi_int_sta & AXI_INT_DMAINT) {
+		usb3_irq_dma(usb3);
+		ret = IRQ_HANDLED;
+	}
+
+	if (axi_int_sta & AXI_INT_EPCINT) {
+		usb3_irq_epc(usb3);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static irqreturn_t renesas_usb3_otg_irq(int irq, void *_usb3)
+{
+	struct renesas_usb3 *usb3 = _usb3;
+
+	usb3_irq_otg_int(usb3);
+
+	return IRQ_HANDLED;
+}
+
+static void usb3_write_pn_mod(struct renesas_usb3_ep *usb3_ep,
+			      const struct usb_endpoint_descriptor *desc)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	u32 val = 0;
+
+	val |= usb3_ep->dir_in ? PN_MOD_DIR : 0;
+	val |= PN_MOD_TYPE(usb_endpoint_type(desc));
+	val |= PN_MOD_EPNUM(usb_endpoint_num(desc));
+	usb3_write(usb3, val, USB3_PN_MOD);
+}
+
+static u32 usb3_calc_ramarea(int ram_size)
+{
+	WARN_ON(ram_size > SZ_16K);
+
+	if (ram_size <= SZ_1K)
+		return PN_RAMMAP_RAMAREA_1KB;
+	else if (ram_size <= SZ_2K)
+		return PN_RAMMAP_RAMAREA_2KB;
+	else if (ram_size <= SZ_4K)
+		return PN_RAMMAP_RAMAREA_4KB;
+	else if (ram_size <= SZ_8K)
+		return PN_RAMMAP_RAMAREA_8KB;
+	else
+		return PN_RAMMAP_RAMAREA_16KB;
+}
+
+static u32 usb3_calc_rammap_val(struct renesas_usb3_ep *usb3_ep,
+				const struct usb_endpoint_descriptor *desc)
+{
+	int i;
+	static const u32 max_packet_array[] = {8, 16, 32, 64, 512};
+	u32 mpkt = PN_RAMMAP_MPKT(1024);
+
+	for (i = 0; i < ARRAY_SIZE(max_packet_array); i++) {
+		if (usb_endpoint_maxp(desc) <= max_packet_array[i])
+			mpkt = PN_RAMMAP_MPKT(max_packet_array[i]);
+	}
+
+	return usb3_ep->rammap_val | mpkt;
+}
+
+static int usb3_enable_pipe_n(struct renesas_usb3_ep *usb3_ep,
+			      const struct usb_endpoint_descriptor *desc)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	unsigned long flags;
+
+	usb3_ep->dir_in = usb_endpoint_dir_in(desc);
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	if (!usb3_pn_change(usb3, usb3_ep->num)) {
+		usb3_write_pn_mod(usb3_ep, desc);
+		usb3_write(usb3, usb3_calc_rammap_val(usb3_ep, desc),
+			   USB3_PN_RAMMAP);
+		usb3_pn_con_clear(usb3);
+		usb3_set_bit(usb3, PN_CON_EN, USB3_PN_CON);
+	}
+	spin_unlock_irqrestore(&usb3->lock, flags);
+
+	return 0;
+}
+
+static int usb3_disable_pipe_n(struct renesas_usb3_ep *usb3_ep)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	unsigned long flags;
+
+	usb3_ep->halt = false;
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	if (!usb3_pn_change(usb3, usb3_ep->num)) {
+		usb3_write(usb3, 0, USB3_PN_INT_ENA);
+		usb3_write(usb3, 0, USB3_PN_RAMMAP);
+		usb3_clear_bit(usb3, PN_CON_EN, USB3_PN_CON);
+	}
+	spin_unlock_irqrestore(&usb3->lock, flags);
+
+	return 0;
+}
+
+/*------- usb_ep_ops -----------------------------------------------------*/
+static int renesas_usb3_ep_enable(struct usb_ep *_ep,
+				  const struct usb_endpoint_descriptor *desc)
+{
+	struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep);
+
+	return usb3_enable_pipe_n(usb3_ep, desc);
+}
+
+static int renesas_usb3_ep_disable(struct usb_ep *_ep)
+{
+	struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep);
+	struct renesas_usb3_request *usb3_req;
+
+	do {
+		usb3_req = usb3_get_request(usb3_ep);
+		if (!usb3_req)
+			break;
+		usb3_dma_try_stop(usb3_ep, usb3_req);
+		usb3_request_done(usb3_ep, usb3_req, -ESHUTDOWN);
+	} while (1);
+
+	return usb3_disable_pipe_n(usb3_ep);
+}
+
+static struct usb_request *__renesas_usb3_ep_alloc_request(gfp_t gfp_flags)
+{
+	struct renesas_usb3_request *usb3_req;
+
+	usb3_req = kzalloc(sizeof(struct renesas_usb3_request), gfp_flags);
+	if (!usb3_req)
+		return NULL;
+
+	INIT_LIST_HEAD(&usb3_req->queue);
+
+	return &usb3_req->req;
+}
+
+static void __renesas_usb3_ep_free_request(struct usb_request *_req)
+{
+	struct renesas_usb3_request *usb3_req = usb_req_to_usb3_req(_req);
+
+	kfree(usb3_req);
+}
+
+static struct usb_request *renesas_usb3_ep_alloc_request(struct usb_ep *_ep,
+							 gfp_t gfp_flags)
+{
+	return __renesas_usb3_ep_alloc_request(gfp_flags);
+}
+
+static void renesas_usb3_ep_free_request(struct usb_ep *_ep,
+					 struct usb_request *_req)
+{
+	__renesas_usb3_ep_free_request(_req);
+}
+
+static int renesas_usb3_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep);
+	struct renesas_usb3_request *usb3_req = usb_req_to_usb3_req(_req);
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+
+	dev_dbg(usb3_to_dev(usb3), "ep_dequeue: ep%2d, %u\n", usb3_ep->num,
+		_req->length);
+
+	usb3_dma_try_stop(usb3_ep, usb3_req);
+	usb3_request_done_pipen(usb3, usb3_ep, usb3_req, -ECONNRESET);
+
+	return 0;
+}
+
+static int renesas_usb3_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	return usb3_set_halt(usb_ep_to_usb3_ep(_ep), !!value, false);
+}
+
+static int renesas_usb3_ep_set_wedge(struct usb_ep *_ep)
+{
+	struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep);
+
+	usb3_ep->wedge = true;
+	return usb3_set_halt(usb3_ep, true, false);
+}
+
+static void renesas_usb3_ep_fifo_flush(struct usb_ep *_ep)
+{
+	struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep);
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	unsigned long flags;
+
+	if (usb3_ep->num) {
+		spin_lock_irqsave(&usb3->lock, flags);
+		if (!usb3_pn_change(usb3, usb3_ep->num)) {
+			usb3_pn_con_clear(usb3);
+			usb3_set_bit(usb3, PN_CON_EN, USB3_PN_CON);
+		}
+		spin_unlock_irqrestore(&usb3->lock, flags);
+	} else {
+		usb3_p0_con_clear_buffer(usb3);
+	}
+}
+
+static const struct usb_ep_ops renesas_usb3_ep_ops = {
+	.enable		= renesas_usb3_ep_enable,
+	.disable	= renesas_usb3_ep_disable,
+
+	.alloc_request	= renesas_usb3_ep_alloc_request,
+	.free_request	= renesas_usb3_ep_free_request,
+
+	.queue		= renesas_usb3_ep_queue,
+	.dequeue	= renesas_usb3_ep_dequeue,
+
+	.set_halt	= renesas_usb3_ep_set_halt,
+	.set_wedge	= renesas_usb3_ep_set_wedge,
+	.fifo_flush	= renesas_usb3_ep_fifo_flush,
+};
+
+/*------- usb_gadget_ops -------------------------------------------------*/
+static int renesas_usb3_start(struct usb_gadget *gadget,
+			      struct usb_gadget_driver *driver)
+{
+	struct renesas_usb3 *usb3;
+
+	if (!driver || driver->max_speed < USB_SPEED_FULL ||
+	    !driver->setup)
+		return -EINVAL;
+
+	usb3 = gadget_to_renesas_usb3(gadget);
+
+	/* hook up the driver */
+	usb3->driver = driver;
+
+	if (usb3->phy)
+		phy_init(usb3->phy);
+
+	pm_runtime_get_sync(usb3_to_dev(usb3));
+
+	renesas_usb3_init_controller(usb3);
+
+	return 0;
+}
+
+static int renesas_usb3_stop(struct usb_gadget *gadget)
+{
+	struct renesas_usb3 *usb3 = gadget_to_renesas_usb3(gadget);
+
+	usb3->softconnect = false;
+	usb3->gadget.speed = USB_SPEED_UNKNOWN;
+	usb3->driver = NULL;
+	renesas_usb3_stop_controller(usb3);
+
+	if (usb3->phy)
+		phy_exit(usb3->phy);
+
+	pm_runtime_put(usb3_to_dev(usb3));
+
+	return 0;
+}
+
+static int renesas_usb3_get_frame(struct usb_gadget *_gadget)
+{
+	return -EOPNOTSUPP;
+}
+
+static int renesas_usb3_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct renesas_usb3 *usb3 = gadget_to_renesas_usb3(gadget);
+
+	usb3->softconnect = !!is_on;
+
+	return 0;
+}
+
+static int renesas_usb3_set_selfpowered(struct usb_gadget *gadget, int is_self)
+{
+	gadget->is_selfpowered = !!is_self;
+
+	return 0;
+}
+
+static const struct usb_gadget_ops renesas_usb3_gadget_ops = {
+	.get_frame		= renesas_usb3_get_frame,
+	.udc_start		= renesas_usb3_start,
+	.udc_stop		= renesas_usb3_stop,
+	.pullup			= renesas_usb3_pullup,
+	.set_selfpowered	= renesas_usb3_set_selfpowered,
+};
+
+static enum usb_role renesas_usb3_role_switch_get(struct usb_role_switch *sw)
+{
+	struct renesas_usb3 *usb3 = usb_role_switch_get_drvdata(sw);
+	enum usb_role cur_role;
+
+	pm_runtime_get_sync(usb3_to_dev(usb3));
+	cur_role = usb3_is_host(usb3) ? USB_ROLE_HOST : USB_ROLE_DEVICE;
+	pm_runtime_put(usb3_to_dev(usb3));
+
+	return cur_role;
+}
+
+static void handle_ext_role_switch_states(struct device *dev,
+					    enum usb_role role)
+{
+	struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
+	struct device *host = usb3->host_dev;
+	enum usb_role cur_role = renesas_usb3_role_switch_get(usb3->role_sw);
+
+	switch (role) {
+	case USB_ROLE_NONE:
+		usb3->connection_state = USB_ROLE_NONE;
+		if (cur_role == USB_ROLE_HOST)
+			device_release_driver(host);
+		if (usb3->driver)
+			usb3_disconnect(usb3);
+		usb3_vbus_out(usb3, false);
+		break;
+	case USB_ROLE_DEVICE:
+		if (usb3->connection_state == USB_ROLE_NONE) {
+			usb3->connection_state = USB_ROLE_DEVICE;
+			usb3_set_mode(usb3, false);
+			if (usb3->driver)
+				usb3_connect(usb3);
+		} else if (cur_role == USB_ROLE_HOST)  {
+			device_release_driver(host);
+			usb3_set_mode(usb3, false);
+			if (usb3->driver)
+				usb3_connect(usb3);
+		}
+		usb3_vbus_out(usb3, false);
+		break;
+	case USB_ROLE_HOST:
+		if (usb3->connection_state == USB_ROLE_NONE) {
+			if (usb3->driver)
+				usb3_disconnect(usb3);
+
+			usb3->connection_state = USB_ROLE_HOST;
+			usb3_set_mode(usb3, true);
+			usb3_vbus_out(usb3, true);
+			if (device_attach(host) < 0)
+				dev_err(dev, "device_attach(host) failed\n");
+		} else if (cur_role == USB_ROLE_DEVICE) {
+			usb3_disconnect(usb3);
+			/* Must set the mode before device_attach of the host */
+			usb3_set_mode(usb3, true);
+			/* This device_attach() might sleep */
+			if (device_attach(host) < 0)
+				dev_err(dev, "device_attach(host) failed\n");
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static void handle_role_switch_states(struct device *dev,
+					    enum usb_role role)
+{
+	struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
+	struct device *host = usb3->host_dev;
+	enum usb_role cur_role = renesas_usb3_role_switch_get(usb3->role_sw);
+
+	if (cur_role == USB_ROLE_HOST && role == USB_ROLE_DEVICE) {
+		device_release_driver(host);
+		usb3_set_mode(usb3, false);
+	} else if (cur_role == USB_ROLE_DEVICE && role == USB_ROLE_HOST) {
+		/* Must set the mode before device_attach of the host */
+		usb3_set_mode(usb3, true);
+		/* This device_attach() might sleep */
+		if (device_attach(host) < 0)
+			dev_err(dev, "device_attach(host) failed\n");
+	}
+}
+
+static int renesas_usb3_role_switch_set(struct usb_role_switch *sw,
+					enum usb_role role)
+{
+	struct renesas_usb3 *usb3 = usb_role_switch_get_drvdata(sw);
+
+	pm_runtime_get_sync(usb3_to_dev(usb3));
+
+	if (usb3->role_sw_by_connector)
+		handle_ext_role_switch_states(usb3_to_dev(usb3), role);
+	else
+		handle_role_switch_states(usb3_to_dev(usb3), role);
+
+	pm_runtime_put(usb3_to_dev(usb3));
+
+	return 0;
+}
+
+static ssize_t role_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
+	bool new_mode_is_host;
+
+	if (!usb3->driver)
+		return -ENODEV;
+
+	if (usb3->forced_b_device)
+		return -EBUSY;
+
+	if (sysfs_streq(buf, "host"))
+		new_mode_is_host = true;
+	else if (sysfs_streq(buf, "peripheral"))
+		new_mode_is_host = false;
+	else
+		return -EINVAL;
+
+	if (new_mode_is_host == usb3_is_host(usb3))
+		return -EINVAL;
+
+	usb3_mode_config(usb3, new_mode_is_host, usb3_is_a_device(usb3));
+
+	return count;
+}
+
+static ssize_t role_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
+
+	if (!usb3->driver)
+		return -ENODEV;
+
+	return sprintf(buf, "%s\n", usb3_is_host(usb3) ? "host" : "peripheral");
+}
+static DEVICE_ATTR_RW(role);
+
+static int renesas_usb3_b_device_show(struct seq_file *s, void *unused)
+{
+	struct renesas_usb3 *usb3 = s->private;
+
+	seq_printf(s, "%d\n", usb3->forced_b_device);
+
+	return 0;
+}
+
+static int renesas_usb3_b_device_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, renesas_usb3_b_device_show, inode->i_private);
+}
+
+static ssize_t renesas_usb3_b_device_write(struct file *file,
+					   const char __user *ubuf,
+					   size_t count, loff_t *ppos)
+{
+	struct seq_file *s = file->private_data;
+	struct renesas_usb3 *usb3 = s->private;
+	char buf[32];
+
+	if (!usb3->driver)
+		return -ENODEV;
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	usb3->start_to_connect = false;
+	if (usb3->workaround_for_vbus && usb3->forced_b_device &&
+	    !strncmp(buf, "2", 1))
+		usb3->start_to_connect = true;
+	else if (!strncmp(buf, "1", 1))
+		usb3->forced_b_device = true;
+	else
+		usb3->forced_b_device = false;
+
+	if (usb3->workaround_for_vbus)
+		usb3_disconnect(usb3);
+
+	/* Let this driver call usb3_connect() if needed */
+	usb3_check_id(usb3);
+
+	return count;
+}
+
+static const struct file_operations renesas_usb3_b_device_fops = {
+	.open = renesas_usb3_b_device_open,
+	.write = renesas_usb3_b_device_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void renesas_usb3_debugfs_init(struct renesas_usb3 *usb3,
+				      struct device *dev)
+{
+	usb3->dentry = debugfs_create_dir(dev_name(dev), usb_debug_root);
+
+	debugfs_create_file("b_device", 0644, usb3->dentry, usb3,
+			    &renesas_usb3_b_device_fops);
+}
+
+/*------- platform_driver ------------------------------------------------*/
+static int renesas_usb3_remove(struct platform_device *pdev)
+{
+	struct renesas_usb3 *usb3 = platform_get_drvdata(pdev);
+
+	debugfs_remove_recursive(usb3->dentry);
+	device_remove_file(&pdev->dev, &dev_attr_role);
+
+	cancel_work_sync(&usb3->role_work);
+	usb_role_switch_unregister(usb3->role_sw);
+
+	usb_del_gadget_udc(&usb3->gadget);
+	reset_control_assert(usb3->usbp_rstc);
+	reset_control_assert(usb3->drd_rstc);
+	renesas_usb3_dma_free_prd(usb3, &pdev->dev);
+
+	__renesas_usb3_ep_free_request(usb3->ep0_req);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static int renesas_usb3_init_ep(struct renesas_usb3 *usb3, struct device *dev,
+				const struct renesas_usb3_priv *priv)
+{
+	struct renesas_usb3_ep *usb3_ep;
+	int i;
+
+	/* calculate num_usb3_eps from renesas_usb3_priv */
+	usb3->num_usb3_eps = priv->ramsize_per_ramif * priv->num_ramif * 2 /
+			     priv->ramsize_per_pipe + 1;
+
+	if (usb3->num_usb3_eps > USB3_MAX_NUM_PIPES(usb3))
+		usb3->num_usb3_eps = USB3_MAX_NUM_PIPES(usb3);
+
+	usb3->usb3_ep = devm_kcalloc(dev,
+				     usb3->num_usb3_eps, sizeof(*usb3_ep),
+				     GFP_KERNEL);
+	if (!usb3->usb3_ep)
+		return -ENOMEM;
+
+	dev_dbg(dev, "%s: num_usb3_eps = %d\n", __func__, usb3->num_usb3_eps);
+	/*
+	 * This driver prepares pipes as follows:
+	 *  - odd pipes = IN pipe
+	 *  - even pipes = OUT pipe (except pipe 0)
+	 */
+	usb3_for_each_ep(usb3_ep, usb3, i) {
+		snprintf(usb3_ep->ep_name, sizeof(usb3_ep->ep_name), "ep%d", i);
+		usb3_ep->usb3 = usb3;
+		usb3_ep->num = i;
+		usb3_ep->ep.name = usb3_ep->ep_name;
+		usb3_ep->ep.ops = &renesas_usb3_ep_ops;
+		INIT_LIST_HEAD(&usb3_ep->queue);
+		INIT_LIST_HEAD(&usb3_ep->ep.ep_list);
+		if (!i) {
+			/* for control pipe */
+			usb3->gadget.ep0 = &usb3_ep->ep;
+			usb_ep_set_maxpacket_limit(&usb3_ep->ep,
+						USB3_EP0_SS_MAX_PACKET_SIZE);
+			usb3_ep->ep.caps.type_control = true;
+			usb3_ep->ep.caps.dir_in = true;
+			usb3_ep->ep.caps.dir_out = true;
+			continue;
+		}
+
+		/* for bulk or interrupt pipe */
+		usb_ep_set_maxpacket_limit(&usb3_ep->ep, ~0);
+		list_add_tail(&usb3_ep->ep.ep_list, &usb3->gadget.ep_list);
+		usb3_ep->ep.caps.type_bulk = true;
+		usb3_ep->ep.caps.type_int = true;
+		if (i & 1)
+			usb3_ep->ep.caps.dir_in = true;
+		else
+			usb3_ep->ep.caps.dir_out = true;
+	}
+
+	return 0;
+}
+
+static void renesas_usb3_init_ram(struct renesas_usb3 *usb3, struct device *dev,
+				  const struct renesas_usb3_priv *priv)
+{
+	struct renesas_usb3_ep *usb3_ep;
+	int i;
+	u32 ramif[2], basead[2];	/* index 0 = for IN pipes */
+	u32 *cur_ramif, *cur_basead;
+	u32 val;
+
+	memset(ramif, 0, sizeof(ramif));
+	memset(basead, 0, sizeof(basead));
+
+	/*
+	 * This driver prepares pipes as follows:
+	 *  - all pipes = the same size as "ramsize_per_pipe"
+	 * Please refer to the "Method of Specifying RAM Mapping"
+	 */
+	usb3_for_each_ep(usb3_ep, usb3, i) {
+		if (!i)
+			continue;	/* out of scope if ep num = 0 */
+		if (usb3_ep->ep.caps.dir_in) {
+			cur_ramif = &ramif[0];
+			cur_basead = &basead[0];
+		} else {
+			cur_ramif = &ramif[1];
+			cur_basead = &basead[1];
+		}
+
+		if (*cur_basead > priv->ramsize_per_ramif)
+			continue;	/* out of memory for IN or OUT pipe */
+
+		/* calculate rammap_val */
+		val = PN_RAMMAP_RAMIF(*cur_ramif);
+		val |= usb3_calc_ramarea(priv->ramsize_per_pipe);
+		val |= PN_RAMMAP_BASEAD(*cur_basead);
+		usb3_ep->rammap_val = val;
+
+		dev_dbg(dev, "ep%2d: val = %08x, ramif = %d, base = %x\n",
+			i, val, *cur_ramif, *cur_basead);
+
+		/* update current ramif */
+		if (*cur_ramif + 1 == priv->num_ramif) {
+			*cur_ramif = 0;
+			*cur_basead += priv->ramsize_per_pipe;
+		} else {
+			(*cur_ramif)++;
+		}
+	}
+}
+
+static const struct renesas_usb3_priv renesas_usb3_priv_r8a7795_es1 = {
+	.ramsize_per_ramif = SZ_16K,
+	.num_ramif = 2,
+	.ramsize_per_pipe = SZ_4K,
+	.workaround_for_vbus = true,
+};
+
+static const struct renesas_usb3_priv renesas_usb3_priv_gen3 = {
+	.ramsize_per_ramif = SZ_16K,
+	.num_ramif = 4,
+	.ramsize_per_pipe = SZ_4K,
+};
+
+static const struct renesas_usb3_priv renesas_usb3_priv_r8a77990 = {
+	.ramsize_per_ramif = SZ_16K,
+	.num_ramif = 4,
+	.ramsize_per_pipe = SZ_4K,
+	.workaround_for_vbus = true,
+};
+
+static const struct renesas_usb3_priv renesas_usb3_priv_rzv2m = {
+	.ramsize_per_ramif = SZ_16K,
+	.num_ramif = 1,
+	.ramsize_per_pipe = SZ_4K,
+	.is_rzv2m = true,
+};
+
+static const struct of_device_id usb3_of_match[] = {
+	{
+		.compatible = "renesas,r8a774c0-usb3-peri",
+		.data = &renesas_usb3_priv_r8a77990,
+	}, {
+		.compatible = "renesas,r8a7795-usb3-peri",
+		.data = &renesas_usb3_priv_gen3,
+	}, {
+		.compatible = "renesas,r8a77990-usb3-peri",
+		.data = &renesas_usb3_priv_r8a77990,
+	}, {
+		.compatible = "renesas,rzv2m-usb3-peri",
+		.data = &renesas_usb3_priv_rzv2m,
+	}, {
+		.compatible = "renesas,rcar-gen3-usb3-peri",
+		.data = &renesas_usb3_priv_gen3,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, usb3_of_match);
+
+static const struct soc_device_attribute renesas_usb3_quirks_match[] = {
+	{
+		.soc_id = "r8a7795", .revision = "ES1.*",
+		.data = &renesas_usb3_priv_r8a7795_es1,
+	},
+	{ /* sentinel */ }
+};
+
+static const unsigned int renesas_usb3_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
+};
+
+static struct usb_role_switch_desc renesas_usb3_role_switch_desc = {
+	.set = renesas_usb3_role_switch_set,
+	.get = renesas_usb3_role_switch_get,
+	.allow_userspace_control = true,
+};
+
+static int renesas_usb3_probe(struct platform_device *pdev)
+{
+	struct renesas_usb3 *usb3;
+	int irq, drd_irq, ret;
+	const struct renesas_usb3_priv *priv;
+	const struct soc_device_attribute *attr;
+
+	attr = soc_device_match(renesas_usb3_quirks_match);
+	if (attr)
+		priv = attr->data;
+	else
+		priv = of_device_get_match_data(&pdev->dev);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	if (priv->is_rzv2m) {
+		drd_irq = platform_get_irq_byname(pdev, "drd");
+		if (drd_irq < 0)
+			return drd_irq;
+	}
+
+	usb3 = devm_kzalloc(&pdev->dev, sizeof(*usb3), GFP_KERNEL);
+	if (!usb3)
+		return -ENOMEM;
+
+	usb3->is_rzv2m = priv->is_rzv2m;
+
+	usb3->reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(usb3->reg))
+		return PTR_ERR(usb3->reg);
+
+	platform_set_drvdata(pdev, usb3);
+	spin_lock_init(&usb3->lock);
+
+	usb3->gadget.ops = &renesas_usb3_gadget_ops;
+	usb3->gadget.name = udc_name;
+	usb3->gadget.max_speed = USB_SPEED_SUPER;
+	INIT_LIST_HEAD(&usb3->gadget.ep_list);
+	ret = renesas_usb3_init_ep(usb3, &pdev->dev, priv);
+	if (ret < 0)
+		return ret;
+	renesas_usb3_init_ram(usb3, &pdev->dev, priv);
+
+	ret = devm_request_irq(&pdev->dev, irq, renesas_usb3_irq, 0,
+			       dev_name(&pdev->dev), usb3);
+	if (ret < 0)
+		return ret;
+
+	if (usb3->is_rzv2m) {
+		ret = devm_request_irq(&pdev->dev, drd_irq,
+				       renesas_usb3_otg_irq, 0,
+				       dev_name(&pdev->dev), usb3);
+		if (ret < 0)
+			return ret;
+	}
+
+	INIT_WORK(&usb3->extcon_work, renesas_usb3_extcon_work);
+	usb3->extcon = devm_extcon_dev_allocate(&pdev->dev, renesas_usb3_cable);
+	if (IS_ERR(usb3->extcon))
+		return PTR_ERR(usb3->extcon);
+
+	ret = devm_extcon_dev_register(&pdev->dev, usb3->extcon);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register extcon\n");
+		return ret;
+	}
+
+	/* for ep0 handling */
+	usb3->ep0_req = __renesas_usb3_ep_alloc_request(GFP_KERNEL);
+	if (!usb3->ep0_req)
+		return -ENOMEM;
+
+	ret = renesas_usb3_dma_alloc_prd(usb3, &pdev->dev);
+	if (ret < 0)
+		goto err_alloc_prd;
+
+	/*
+	 * This is optional. So, if this driver cannot get a phy,
+	 * this driver will not handle a phy anymore.
+	 */
+	usb3->phy = devm_phy_optional_get(&pdev->dev, "usb");
+	if (IS_ERR(usb3->phy)) {
+		ret = PTR_ERR(usb3->phy);
+		goto err_add_udc;
+	}
+
+	usb3->drd_rstc = devm_reset_control_get_optional_shared(&pdev->dev,
+								"drd_reset");
+	if (IS_ERR(usb3->drd_rstc)) {
+		ret = PTR_ERR(usb3->drd_rstc);
+		goto err_add_udc;
+	}
+
+	usb3->usbp_rstc = devm_reset_control_get_optional_shared(&pdev->dev,
+								 "aresetn_p");
+	if (IS_ERR(usb3->usbp_rstc)) {
+		ret = PTR_ERR(usb3->usbp_rstc);
+		goto err_add_udc;
+	}
+
+	reset_control_deassert(usb3->drd_rstc);
+	reset_control_deassert(usb3->usbp_rstc);
+
+	pm_runtime_enable(&pdev->dev);
+	ret = usb_add_gadget_udc(&pdev->dev, &usb3->gadget);
+	if (ret < 0)
+		goto err_reset;
+
+	ret = device_create_file(&pdev->dev, &dev_attr_role);
+	if (ret < 0)
+		goto err_dev_create;
+
+	if (device_property_read_bool(&pdev->dev, "usb-role-switch")) {
+		usb3->role_sw_by_connector = true;
+		renesas_usb3_role_switch_desc.fwnode = dev_fwnode(&pdev->dev);
+	}
+
+	renesas_usb3_role_switch_desc.driver_data = usb3;
+
+	INIT_WORK(&usb3->role_work, renesas_usb3_role_work);
+	usb3->role_sw = usb_role_switch_register(&pdev->dev,
+					&renesas_usb3_role_switch_desc);
+	if (!IS_ERR(usb3->role_sw)) {
+		usb3->host_dev = usb_of_get_companion_dev(&pdev->dev);
+		if (!usb3->host_dev) {
+			/* If not found, this driver will not use a role sw */
+			usb_role_switch_unregister(usb3->role_sw);
+			usb3->role_sw = NULL;
+		}
+	} else {
+		usb3->role_sw = NULL;
+	}
+
+	usb3->workaround_for_vbus = priv->workaround_for_vbus;
+
+	renesas_usb3_debugfs_init(usb3, &pdev->dev);
+
+	dev_info(&pdev->dev, "probed%s\n", usb3->phy ? " with phy" : "");
+
+	return 0;
+
+err_dev_create:
+	usb_del_gadget_udc(&usb3->gadget);
+
+err_reset:
+	reset_control_assert(usb3->usbp_rstc);
+	reset_control_assert(usb3->drd_rstc);
+
+err_add_udc:
+	renesas_usb3_dma_free_prd(usb3, &pdev->dev);
+
+err_alloc_prd:
+	__renesas_usb3_ep_free_request(usb3->ep0_req);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int renesas_usb3_suspend(struct device *dev)
+{
+	struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
+
+	/* Not started */
+	if (!usb3->driver)
+		return 0;
+
+	renesas_usb3_stop_controller(usb3);
+	if (usb3->phy)
+		phy_exit(usb3->phy);
+	pm_runtime_put(dev);
+
+	return 0;
+}
+
+static int renesas_usb3_resume(struct device *dev)
+{
+	struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
+
+	/* Not started */
+	if (!usb3->driver)
+		return 0;
+
+	if (usb3->phy)
+		phy_init(usb3->phy);
+	pm_runtime_get_sync(dev);
+	renesas_usb3_init_controller(usb3);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(renesas_usb3_pm_ops, renesas_usb3_suspend,
+			renesas_usb3_resume);
+
+static struct platform_driver renesas_usb3_driver = {
+	.probe		= renesas_usb3_probe,
+	.remove		= renesas_usb3_remove,
+	.driver		= {
+		.name =	udc_name,
+		.pm		= &renesas_usb3_pm_ops,
+		.of_match_table = of_match_ptr(usb3_of_match),
+	},
+};
+module_platform_driver(renesas_usb3_driver);
+
+MODULE_DESCRIPTION("Renesas USB3.0 Peripheral driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");
+MODULE_ALIAS("platform:renesas_usb3");
diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
new file mode 100644
index 000000000..4b7eb7701
--- /dev/null
+++ b/drivers/usb/gadget/udc/s3c-hsudc.c
@@ -0,0 +1,1319 @@
+// SPDX-License-Identifier: GPL-2.0
+/* linux/drivers/usb/gadget/s3c-hsudc.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S3C24XX USB 2.0 High-speed USB controller gadget driver
+ *
+ * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints.
+ * Each endpoint can be configured as either in or out endpoint. Endpoints
+ * can be configured for Bulk or Interrupt transfer mode.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/prefetch.h>
+#include <linux/platform_data/s3c-hsudc.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
+
+#define S3C_HSUDC_REG(x)	(x)
+
+/* Non-Indexed Registers */
+#define S3C_IR				S3C_HSUDC_REG(0x00) /* Index Register */
+#define S3C_EIR				S3C_HSUDC_REG(0x04) /* EP Intr Status */
+#define S3C_EIR_EP0			(1<<0)
+#define S3C_EIER			S3C_HSUDC_REG(0x08) /* EP Intr Enable */
+#define S3C_FAR				S3C_HSUDC_REG(0x0c) /* Gadget Address */
+#define S3C_FNR				S3C_HSUDC_REG(0x10) /* Frame Number */
+#define S3C_EDR				S3C_HSUDC_REG(0x14) /* EP Direction */
+#define S3C_TR				S3C_HSUDC_REG(0x18) /* Test Register */
+#define S3C_SSR				S3C_HSUDC_REG(0x1c) /* System Status */
+#define S3C_SSR_DTZIEN_EN		(0xff8f)
+#define S3C_SSR_ERR			(0xff80)
+#define S3C_SSR_VBUSON			(1 << 8)
+#define S3C_SSR_HSP			(1 << 4)
+#define S3C_SSR_SDE			(1 << 3)
+#define S3C_SSR_RESUME			(1 << 2)
+#define S3C_SSR_SUSPEND			(1 << 1)
+#define S3C_SSR_RESET			(1 << 0)
+#define S3C_SCR				S3C_HSUDC_REG(0x20) /* System Control */
+#define S3C_SCR_DTZIEN_EN		(1 << 14)
+#define S3C_SCR_RRD_EN			(1 << 5)
+#define S3C_SCR_SUS_EN			(1 << 1)
+#define S3C_SCR_RST_EN			(1 << 0)
+#define S3C_EP0SR			S3C_HSUDC_REG(0x24) /* EP0 Status */
+#define S3C_EP0SR_EP0_LWO		(1 << 6)
+#define S3C_EP0SR_STALL			(1 << 4)
+#define S3C_EP0SR_TX_SUCCESS		(1 << 1)
+#define S3C_EP0SR_RX_SUCCESS		(1 << 0)
+#define S3C_EP0CR			S3C_HSUDC_REG(0x28) /* EP0 Control */
+#define S3C_BR(_x)			S3C_HSUDC_REG(0x60 + (_x * 4))
+
+/* Indexed Registers */
+#define S3C_ESR				S3C_HSUDC_REG(0x2c) /* EPn Status */
+#define S3C_ESR_FLUSH			(1 << 6)
+#define S3C_ESR_STALL			(1 << 5)
+#define S3C_ESR_LWO			(1 << 4)
+#define S3C_ESR_PSIF_ONE		(1 << 2)
+#define S3C_ESR_PSIF_TWO		(2 << 2)
+#define S3C_ESR_TX_SUCCESS		(1 << 1)
+#define S3C_ESR_RX_SUCCESS		(1 << 0)
+#define S3C_ECR				S3C_HSUDC_REG(0x30) /* EPn Control */
+#define S3C_ECR_DUEN			(1 << 7)
+#define S3C_ECR_FLUSH			(1 << 6)
+#define S3C_ECR_STALL			(1 << 1)
+#define S3C_ECR_IEMS			(1 << 0)
+#define S3C_BRCR			S3C_HSUDC_REG(0x34) /* Read Count */
+#define S3C_BWCR			S3C_HSUDC_REG(0x38) /* Write Count */
+#define S3C_MPR				S3C_HSUDC_REG(0x3c) /* Max Pkt Size */
+
+#define WAIT_FOR_SETUP			(0)
+#define DATA_STATE_XMIT			(1)
+#define DATA_STATE_RECV			(2)
+
+static const char * const s3c_hsudc_supply_names[] = {
+	"vdda",		/* analog phy supply, 3.3V */
+	"vddi",		/* digital phy supply, 1.2V */
+	"vddosc",	/* oscillator supply, 1.8V - 3.3V */
+};
+
+/**
+ * struct s3c_hsudc_ep - Endpoint representation used by driver.
+ * @ep: USB gadget layer representation of device endpoint.
+ * @name: Endpoint name (as required by ep autoconfiguration).
+ * @dev: Reference to the device controller to which this EP belongs.
+ * @desc: Endpoint descriptor obtained from the gadget driver.
+ * @queue: Transfer request queue for the endpoint.
+ * @stopped: Maintains state of endpoint, set if EP is halted.
+ * @bEndpointAddress: EP address (including direction bit).
+ * @fifo: Base address of EP FIFO.
+ */
+struct s3c_hsudc_ep {
+	struct usb_ep ep;
+	char name[20];
+	struct s3c_hsudc *dev;
+	struct list_head queue;
+	u8 stopped;
+	u8 wedge;
+	u8 bEndpointAddress;
+	void __iomem *fifo;
+};
+
+/**
+ * struct s3c_hsudc_req - Driver encapsulation of USB gadget transfer request.
+ * @req: Reference to USB gadget transfer request.
+ * @queue: Used for inserting this request to the endpoint request queue.
+ */
+struct s3c_hsudc_req {
+	struct usb_request req;
+	struct list_head queue;
+};
+
+/**
+ * struct s3c_hsudc - Driver's abstraction of the device controller.
+ * @gadget: Instance of usb_gadget which is referenced by gadget driver.
+ * @driver: Reference to currently active gadget driver.
+ * @dev: The device reference used by probe function.
+ * @lock: Lock to synchronize the usage of Endpoints (EP's are indexed).
+ * @regs: Remapped base address of controller's register space.
+ * irq: IRQ number used by the controller.
+ * uclk: Reference to the controller clock.
+ * ep0state: Current state of EP0.
+ * ep: List of endpoints supported by the controller.
+ */
+struct s3c_hsudc {
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *driver;
+	struct device *dev;
+	struct s3c24xx_hsudc_platdata *pd;
+	struct usb_phy *transceiver;
+	struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsudc_supply_names)];
+	spinlock_t lock;
+	void __iomem *regs;
+	int irq;
+	struct clk *uclk;
+	int ep0state;
+	struct s3c_hsudc_ep ep[];
+};
+
+#define ep_maxpacket(_ep)	((_ep)->ep.maxpacket)
+#define ep_is_in(_ep)		((_ep)->bEndpointAddress & USB_DIR_IN)
+#define ep_index(_ep)		((_ep)->bEndpointAddress & \
+					USB_ENDPOINT_NUMBER_MASK)
+
+static const char driver_name[] = "s3c-udc";
+static const char ep0name[] = "ep0-control";
+
+static inline struct s3c_hsudc_req *our_req(struct usb_request *req)
+{
+	return container_of(req, struct s3c_hsudc_req, req);
+}
+
+static inline struct s3c_hsudc_ep *our_ep(struct usb_ep *ep)
+{
+	return container_of(ep, struct s3c_hsudc_ep, ep);
+}
+
+static inline struct s3c_hsudc *to_hsudc(struct usb_gadget *gadget)
+{
+	return container_of(gadget, struct s3c_hsudc, gadget);
+}
+
+static inline void set_index(struct s3c_hsudc *hsudc, int ep_addr)
+{
+	ep_addr &= USB_ENDPOINT_NUMBER_MASK;
+	writel(ep_addr, hsudc->regs + S3C_IR);
+}
+
+static inline void __orr32(void __iomem *ptr, u32 val)
+{
+	writel(readl(ptr) | val, ptr);
+}
+
+/**
+ * s3c_hsudc_complete_request - Complete a transfer request.
+ * @hsep: Endpoint to which the request belongs.
+ * @hsreq: Transfer request to be completed.
+ * @status: Transfer completion status for the transfer request.
+ */
+static void s3c_hsudc_complete_request(struct s3c_hsudc_ep *hsep,
+				struct s3c_hsudc_req *hsreq, int status)
+{
+	unsigned int stopped = hsep->stopped;
+	struct s3c_hsudc *hsudc = hsep->dev;
+
+	list_del_init(&hsreq->queue);
+	hsreq->req.status = status;
+
+	if (!ep_index(hsep)) {
+		hsudc->ep0state = WAIT_FOR_SETUP;
+		hsep->bEndpointAddress &= ~USB_DIR_IN;
+	}
+
+	hsep->stopped = 1;
+	spin_unlock(&hsudc->lock);
+	usb_gadget_giveback_request(&hsep->ep, &hsreq->req);
+	spin_lock(&hsudc->lock);
+	hsep->stopped = stopped;
+}
+
+/**
+ * s3c_hsudc_nuke_ep - Terminate all requests queued for a endpoint.
+ * @hsep: Endpoint for which queued requests have to be terminated.
+ * @status: Transfer completion status for the transfer request.
+ */
+static void s3c_hsudc_nuke_ep(struct s3c_hsudc_ep *hsep, int status)
+{
+	struct s3c_hsudc_req *hsreq;
+
+	while (!list_empty(&hsep->queue)) {
+		hsreq = list_entry(hsep->queue.next,
+				struct s3c_hsudc_req, queue);
+		s3c_hsudc_complete_request(hsep, hsreq, status);
+	}
+}
+
+/**
+ * s3c_hsudc_stop_activity - Stop activity on all endpoints.
+ * @hsudc: Device controller for which EP activity is to be stopped.
+ *
+ * All the endpoints are stopped and any pending transfer requests if any on
+ * the endpoint are terminated.
+ */
+static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc)
+{
+	struct s3c_hsudc_ep *hsep;
+	int epnum;
+
+	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
+
+	for (epnum = 0; epnum < hsudc->pd->epnum; epnum++) {
+		hsep = &hsudc->ep[epnum];
+		hsep->stopped = 1;
+		s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN);
+	}
+}
+
+/**
+ * s3c_hsudc_read_setup_pkt - Read the received setup packet from EP0 fifo.
+ * @hsudc: Device controller from which setup packet is to be read.
+ * @buf: The buffer into which the setup packet is read.
+ *
+ * The setup packet received in the EP0 fifo is read and stored into a
+ * given buffer address.
+ */
+
+static void s3c_hsudc_read_setup_pkt(struct s3c_hsudc *hsudc, u16 *buf)
+{
+	int count;
+
+	count = readl(hsudc->regs + S3C_BRCR);
+	while (count--)
+		*buf++ = (u16)readl(hsudc->regs + S3C_BR(0));
+
+	writel(S3C_EP0SR_RX_SUCCESS, hsudc->regs + S3C_EP0SR);
+}
+
+/**
+ * s3c_hsudc_write_fifo - Write next chunk of transfer data to EP fifo.
+ * @hsep: Endpoint to which the data is to be written.
+ * @hsreq: Transfer request from which the next chunk of data is written.
+ *
+ * Write the next chunk of data from a transfer request to the endpoint FIFO.
+ * If the transfer request completes, 1 is returned, otherwise 0 is returned.
+ */
+static int s3c_hsudc_write_fifo(struct s3c_hsudc_ep *hsep,
+				struct s3c_hsudc_req *hsreq)
+{
+	u16 *buf;
+	u32 max = ep_maxpacket(hsep);
+	u32 count, length;
+	bool is_last;
+	void __iomem *fifo = hsep->fifo;
+
+	buf = hsreq->req.buf + hsreq->req.actual;
+	prefetch(buf);
+
+	length = hsreq->req.length - hsreq->req.actual;
+	length = min(length, max);
+	hsreq->req.actual += length;
+
+	writel(length, hsep->dev->regs + S3C_BWCR);
+	for (count = 0; count < length; count += 2)
+		writel(*buf++, fifo);
+
+	if (count != max) {
+		is_last = true;
+	} else {
+		if (hsreq->req.length != hsreq->req.actual || hsreq->req.zero)
+			is_last = false;
+		else
+			is_last = true;
+	}
+
+	if (is_last) {
+		s3c_hsudc_complete_request(hsep, hsreq, 0);
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * s3c_hsudc_read_fifo - Read the next chunk of data from EP fifo.
+ * @hsep: Endpoint from which the data is to be read.
+ * @hsreq: Transfer request to which the next chunk of data read is written.
+ *
+ * Read the next chunk of data from the endpoint FIFO and a write it to the
+ * transfer request buffer. If the transfer request completes, 1 is returned,
+ * otherwise 0 is returned.
+ */
+static int s3c_hsudc_read_fifo(struct s3c_hsudc_ep *hsep,
+				struct s3c_hsudc_req *hsreq)
+{
+	struct s3c_hsudc *hsudc = hsep->dev;
+	u32 csr, offset;
+	u16 *buf, word;
+	u32 buflen, rcnt, rlen;
+	void __iomem *fifo = hsep->fifo;
+	u32 is_short = 0;
+
+	offset = (ep_index(hsep)) ? S3C_ESR : S3C_EP0SR;
+	csr = readl(hsudc->regs + offset);
+	if (!(csr & S3C_ESR_RX_SUCCESS))
+		return -EINVAL;
+
+	buf = hsreq->req.buf + hsreq->req.actual;
+	prefetchw(buf);
+	buflen = hsreq->req.length - hsreq->req.actual;
+
+	rcnt = readl(hsudc->regs + S3C_BRCR);
+	rlen = (csr & S3C_ESR_LWO) ? (rcnt * 2 - 1) : (rcnt * 2);
+
+	hsreq->req.actual += min(rlen, buflen);
+	is_short = (rlen < hsep->ep.maxpacket);
+
+	while (rcnt-- != 0) {
+		word = (u16)readl(fifo);
+		if (buflen) {
+			*buf++ = word;
+			buflen--;
+		} else {
+			hsreq->req.status = -EOVERFLOW;
+		}
+	}
+
+	writel(S3C_ESR_RX_SUCCESS, hsudc->regs + offset);
+
+	if (is_short || hsreq->req.actual == hsreq->req.length) {
+		s3c_hsudc_complete_request(hsep, hsreq, 0);
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * s3c_hsudc_epin_intr - Handle in-endpoint interrupt.
+ * @hsudc - Device controller for which the interrupt is to be handled.
+ * @ep_idx - Endpoint number on which an interrupt is pending.
+ *
+ * Handles interrupt for a in-endpoint. The interrupts that are handled are
+ * stall and data transmit complete interrupt.
+ */
+static void s3c_hsudc_epin_intr(struct s3c_hsudc *hsudc, u32 ep_idx)
+{
+	struct s3c_hsudc_ep *hsep = &hsudc->ep[ep_idx];
+	struct s3c_hsudc_req *hsreq;
+	u32 csr;
+
+	csr = readl(hsudc->regs + S3C_ESR);
+	if (csr & S3C_ESR_STALL) {
+		writel(S3C_ESR_STALL, hsudc->regs + S3C_ESR);
+		return;
+	}
+
+	if (csr & S3C_ESR_TX_SUCCESS) {
+		writel(S3C_ESR_TX_SUCCESS, hsudc->regs + S3C_ESR);
+		if (list_empty(&hsep->queue))
+			return;
+
+		hsreq = list_entry(hsep->queue.next,
+				struct s3c_hsudc_req, queue);
+		if ((s3c_hsudc_write_fifo(hsep, hsreq) == 0) &&
+				(csr & S3C_ESR_PSIF_TWO))
+			s3c_hsudc_write_fifo(hsep, hsreq);
+	}
+}
+
+/**
+ * s3c_hsudc_epout_intr - Handle out-endpoint interrupt.
+ * @hsudc - Device controller for which the interrupt is to be handled.
+ * @ep_idx - Endpoint number on which an interrupt is pending.
+ *
+ * Handles interrupt for a out-endpoint. The interrupts that are handled are
+ * stall, flush and data ready interrupt.
+ */
+static void s3c_hsudc_epout_intr(struct s3c_hsudc *hsudc, u32 ep_idx)
+{
+	struct s3c_hsudc_ep *hsep = &hsudc->ep[ep_idx];
+	struct s3c_hsudc_req *hsreq;
+	u32 csr;
+
+	csr = readl(hsudc->regs + S3C_ESR);
+	if (csr & S3C_ESR_STALL) {
+		writel(S3C_ESR_STALL, hsudc->regs + S3C_ESR);
+		return;
+	}
+
+	if (csr & S3C_ESR_FLUSH) {
+		__orr32(hsudc->regs + S3C_ECR, S3C_ECR_FLUSH);
+		return;
+	}
+
+	if (csr & S3C_ESR_RX_SUCCESS) {
+		if (list_empty(&hsep->queue))
+			return;
+
+		hsreq = list_entry(hsep->queue.next,
+				struct s3c_hsudc_req, queue);
+		if (((s3c_hsudc_read_fifo(hsep, hsreq)) == 0) &&
+				(csr & S3C_ESR_PSIF_TWO))
+			s3c_hsudc_read_fifo(hsep, hsreq);
+	}
+}
+
+/** s3c_hsudc_set_halt - Set or clear a endpoint halt.
+ * @_ep: Endpoint on which halt has to be set or cleared.
+ * @value: 1 for setting halt on endpoint, 0 to clear halt.
+ *
+ * Set or clear endpoint halt. If halt is set, the endpoint is stopped.
+ * If halt is cleared, for in-endpoints, if there are any pending
+ * transfer requests, transfers are started.
+ */
+static int s3c_hsudc_set_halt(struct usb_ep *_ep, int value)
+{
+	struct s3c_hsudc_ep *hsep = our_ep(_ep);
+	struct s3c_hsudc *hsudc = hsep->dev;
+	struct s3c_hsudc_req *hsreq;
+	unsigned long irqflags;
+	u32 ecr;
+	u32 offset;
+
+	if (value && ep_is_in(hsep) && !list_empty(&hsep->queue))
+		return -EAGAIN;
+
+	spin_lock_irqsave(&hsudc->lock, irqflags);
+	set_index(hsudc, ep_index(hsep));
+	offset = (ep_index(hsep)) ? S3C_ECR : S3C_EP0CR;
+	ecr = readl(hsudc->regs + offset);
+
+	if (value) {
+		ecr |= S3C_ECR_STALL;
+		if (ep_index(hsep))
+			ecr |= S3C_ECR_FLUSH;
+		hsep->stopped = 1;
+	} else {
+		ecr &= ~S3C_ECR_STALL;
+		hsep->stopped = hsep->wedge = 0;
+	}
+	writel(ecr, hsudc->regs + offset);
+
+	if (ep_is_in(hsep) && !list_empty(&hsep->queue) && !value) {
+		hsreq = list_entry(hsep->queue.next,
+			struct s3c_hsudc_req, queue);
+		if (hsreq)
+			s3c_hsudc_write_fifo(hsep, hsreq);
+	}
+
+	spin_unlock_irqrestore(&hsudc->lock, irqflags);
+	return 0;
+}
+
+/** s3c_hsudc_set_wedge - Sets the halt feature with the clear requests ignored
+ * @_ep: Endpoint on which wedge has to be set.
+ *
+ * Sets the halt feature with the clear requests ignored.
+ */
+static int s3c_hsudc_set_wedge(struct usb_ep *_ep)
+{
+	struct s3c_hsudc_ep *hsep = our_ep(_ep);
+
+	if (!hsep)
+		return -EINVAL;
+
+	hsep->wedge = 1;
+	return usb_ep_set_halt(_ep);
+}
+
+/** s3c_hsudc_handle_reqfeat - Handle set feature or clear feature requests.
+ * @_ep: Device controller on which the set/clear feature needs to be handled.
+ * @ctrl: Control request as received on the endpoint 0.
+ *
+ * Handle set feature or clear feature control requests on the control endpoint.
+ */
+static int s3c_hsudc_handle_reqfeat(struct s3c_hsudc *hsudc,
+					struct usb_ctrlrequest *ctrl)
+{
+	struct s3c_hsudc_ep *hsep;
+	bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
+	u8 ep_num = ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK;
+
+	if (ctrl->bRequestType == USB_RECIP_ENDPOINT) {
+		hsep = &hsudc->ep[ep_num];
+		switch (le16_to_cpu(ctrl->wValue)) {
+		case USB_ENDPOINT_HALT:
+			if (set || !hsep->wedge)
+				s3c_hsudc_set_halt(&hsep->ep, set);
+			return 0;
+		}
+	}
+
+	return -ENOENT;
+}
+
+/**
+ * s3c_hsudc_process_req_status - Handle get status control request.
+ * @hsudc: Device controller on which get status request has be handled.
+ * @ctrl: Control request as received on the endpoint 0.
+ *
+ * Handle get status control request received on control endpoint.
+ */
+static void s3c_hsudc_process_req_status(struct s3c_hsudc *hsudc,
+					struct usb_ctrlrequest *ctrl)
+{
+	struct s3c_hsudc_ep *hsep0 = &hsudc->ep[0];
+	struct s3c_hsudc_req hsreq;
+	struct s3c_hsudc_ep *hsep;
+	__le16 reply;
+	u8 epnum;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		reply = cpu_to_le16(0);
+		break;
+
+	case USB_RECIP_INTERFACE:
+		reply = cpu_to_le16(0);
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		epnum = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK;
+		hsep = &hsudc->ep[epnum];
+		reply = cpu_to_le16(hsep->stopped ? 1 : 0);
+		break;
+	}
+
+	INIT_LIST_HEAD(&hsreq.queue);
+	hsreq.req.length = 2;
+	hsreq.req.buf = &reply;
+	hsreq.req.actual = 0;
+	hsreq.req.complete = NULL;
+	s3c_hsudc_write_fifo(hsep0, &hsreq);
+}
+
+/**
+ * s3c_hsudc_process_setup - Process control request received on endpoint 0.
+ * @hsudc: Device controller on which control request has been received.
+ *
+ * Read the control request received on endpoint 0, decode it and handle
+ * the request.
+ */
+static void s3c_hsudc_process_setup(struct s3c_hsudc *hsudc)
+{
+	struct s3c_hsudc_ep *hsep = &hsudc->ep[0];
+	struct usb_ctrlrequest ctrl = {0};
+	int ret;
+
+	s3c_hsudc_nuke_ep(hsep, -EPROTO);
+	s3c_hsudc_read_setup_pkt(hsudc, (u16 *)&ctrl);
+
+	if (ctrl.bRequestType & USB_DIR_IN) {
+		hsep->bEndpointAddress |= USB_DIR_IN;
+		hsudc->ep0state = DATA_STATE_XMIT;
+	} else {
+		hsep->bEndpointAddress &= ~USB_DIR_IN;
+		hsudc->ep0state = DATA_STATE_RECV;
+	}
+
+	switch (ctrl.bRequest) {
+	case USB_REQ_SET_ADDRESS:
+		if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
+			break;
+		hsudc->ep0state = WAIT_FOR_SETUP;
+		return;
+
+	case USB_REQ_GET_STATUS:
+		if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD)
+			break;
+		s3c_hsudc_process_req_status(hsudc, &ctrl);
+		return;
+
+	case USB_REQ_SET_FEATURE:
+	case USB_REQ_CLEAR_FEATURE:
+		if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD)
+			break;
+		s3c_hsudc_handle_reqfeat(hsudc, &ctrl);
+		hsudc->ep0state = WAIT_FOR_SETUP;
+		return;
+	}
+
+	if (hsudc->driver) {
+		spin_unlock(&hsudc->lock);
+		ret = hsudc->driver->setup(&hsudc->gadget, &ctrl);
+		spin_lock(&hsudc->lock);
+
+		if (ctrl.bRequest == USB_REQ_SET_CONFIGURATION) {
+			hsep->bEndpointAddress &= ~USB_DIR_IN;
+			hsudc->ep0state = WAIT_FOR_SETUP;
+		}
+
+		if (ret < 0) {
+			dev_err(hsudc->dev, "setup failed, returned %d\n",
+						ret);
+			s3c_hsudc_set_halt(&hsep->ep, 1);
+			hsudc->ep0state = WAIT_FOR_SETUP;
+			hsep->bEndpointAddress &= ~USB_DIR_IN;
+		}
+	}
+}
+
+/** s3c_hsudc_handle_ep0_intr - Handle endpoint 0 interrupt.
+ * @hsudc: Device controller on which endpoint 0 interrupt has occurred.
+ *
+ * Handle endpoint 0 interrupt when it occurs. EP0 interrupt could occur
+ * when a stall handshake is sent to host or data is sent/received on
+ * endpoint 0.
+ */
+static void s3c_hsudc_handle_ep0_intr(struct s3c_hsudc *hsudc)
+{
+	struct s3c_hsudc_ep *hsep = &hsudc->ep[0];
+	struct s3c_hsudc_req *hsreq;
+	u32 csr = readl(hsudc->regs + S3C_EP0SR);
+	u32 ecr;
+
+	if (csr & S3C_EP0SR_STALL) {
+		ecr = readl(hsudc->regs + S3C_EP0CR);
+		ecr &= ~(S3C_ECR_STALL | S3C_ECR_FLUSH);
+		writel(ecr, hsudc->regs + S3C_EP0CR);
+
+		writel(S3C_EP0SR_STALL, hsudc->regs + S3C_EP0SR);
+		hsep->stopped = 0;
+
+		s3c_hsudc_nuke_ep(hsep, -ECONNABORTED);
+		hsudc->ep0state = WAIT_FOR_SETUP;
+		hsep->bEndpointAddress &= ~USB_DIR_IN;
+		return;
+	}
+
+	if (csr & S3C_EP0SR_TX_SUCCESS) {
+		writel(S3C_EP0SR_TX_SUCCESS, hsudc->regs + S3C_EP0SR);
+		if (ep_is_in(hsep)) {
+			if (list_empty(&hsep->queue))
+				return;
+
+			hsreq = list_entry(hsep->queue.next,
+					struct s3c_hsudc_req, queue);
+			s3c_hsudc_write_fifo(hsep, hsreq);
+		}
+	}
+
+	if (csr & S3C_EP0SR_RX_SUCCESS) {
+		if (hsudc->ep0state == WAIT_FOR_SETUP)
+			s3c_hsudc_process_setup(hsudc);
+		else {
+			if (!ep_is_in(hsep)) {
+				if (list_empty(&hsep->queue))
+					return;
+				hsreq = list_entry(hsep->queue.next,
+					struct s3c_hsudc_req, queue);
+				s3c_hsudc_read_fifo(hsep, hsreq);
+			}
+		}
+	}
+}
+
+/**
+ * s3c_hsudc_ep_enable - Enable a endpoint.
+ * @_ep: The endpoint to be enabled.
+ * @desc: Endpoint descriptor.
+ *
+ * Enables a endpoint when called from the gadget driver. Endpoint stall if
+ * any is cleared, transfer type is configured and endpoint interrupt is
+ * enabled.
+ */
+static int s3c_hsudc_ep_enable(struct usb_ep *_ep,
+				const struct usb_endpoint_descriptor *desc)
+{
+	struct s3c_hsudc_ep *hsep;
+	struct s3c_hsudc *hsudc;
+	unsigned long flags;
+	u32 ecr = 0;
+
+	hsep = our_ep(_ep);
+	if (!_ep || !desc || _ep->name == ep0name
+		|| desc->bDescriptorType != USB_DT_ENDPOINT
+		|| hsep->bEndpointAddress != desc->bEndpointAddress
+		|| ep_maxpacket(hsep) < usb_endpoint_maxp(desc))
+		return -EINVAL;
+
+	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
+		&& usb_endpoint_maxp(desc) != ep_maxpacket(hsep))
+		|| !desc->wMaxPacketSize)
+		return -ERANGE;
+
+	hsudc = hsep->dev;
+	if (!hsudc->driver || hsudc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&hsudc->lock, flags);
+
+	set_index(hsudc, hsep->bEndpointAddress);
+	ecr |= ((usb_endpoint_xfer_int(desc)) ? S3C_ECR_IEMS : S3C_ECR_DUEN);
+	writel(ecr, hsudc->regs + S3C_ECR);
+
+	hsep->stopped = hsep->wedge = 0;
+	hsep->ep.desc = desc;
+	hsep->ep.maxpacket = usb_endpoint_maxp(desc);
+
+	s3c_hsudc_set_halt(_ep, 0);
+	__set_bit(ep_index(hsep), hsudc->regs + S3C_EIER);
+
+	spin_unlock_irqrestore(&hsudc->lock, flags);
+	return 0;
+}
+
+/**
+ * s3c_hsudc_ep_disable - Disable a endpoint.
+ * @_ep: The endpoint to be disabled.
+ * @desc: Endpoint descriptor.
+ *
+ * Disables a endpoint when called from the gadget driver.
+ */
+static int s3c_hsudc_ep_disable(struct usb_ep *_ep)
+{
+	struct s3c_hsudc_ep *hsep = our_ep(_ep);
+	struct s3c_hsudc *hsudc = hsep->dev;
+	unsigned long flags;
+
+	if (!_ep || !hsep->ep.desc)
+		return -EINVAL;
+
+	spin_lock_irqsave(&hsudc->lock, flags);
+
+	set_index(hsudc, hsep->bEndpointAddress);
+	__clear_bit(ep_index(hsep), hsudc->regs + S3C_EIER);
+
+	s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN);
+
+	hsep->ep.desc = NULL;
+	hsep->stopped = 1;
+
+	spin_unlock_irqrestore(&hsudc->lock, flags);
+	return 0;
+}
+
+/**
+ * s3c_hsudc_alloc_request - Allocate a new request.
+ * @_ep: Endpoint for which request is allocated (not used).
+ * @gfp_flags: Flags used for the allocation.
+ *
+ * Allocates a single transfer request structure when called from gadget driver.
+ */
+static struct usb_request *s3c_hsudc_alloc_request(struct usb_ep *_ep,
+						gfp_t gfp_flags)
+{
+	struct s3c_hsudc_req *hsreq;
+
+	hsreq = kzalloc(sizeof(*hsreq), gfp_flags);
+	if (!hsreq)
+		return NULL;
+
+	INIT_LIST_HEAD(&hsreq->queue);
+	return &hsreq->req;
+}
+
+/**
+ * s3c_hsudc_free_request - Deallocate a request.
+ * @ep: Endpoint for which request is deallocated (not used).
+ * @_req: Request to be deallocated.
+ *
+ * Allocates a single transfer request structure when called from gadget driver.
+ */
+static void s3c_hsudc_free_request(struct usb_ep *ep, struct usb_request *_req)
+{
+	struct s3c_hsudc_req *hsreq;
+
+	hsreq = our_req(_req);
+	WARN_ON(!list_empty(&hsreq->queue));
+	kfree(hsreq);
+}
+
+/**
+ * s3c_hsudc_queue - Queue a transfer request for the endpoint.
+ * @_ep: Endpoint for which the request is queued.
+ * @_req: Request to be queued.
+ * @gfp_flags: Not used.
+ *
+ * Start or enqueue a request for a endpoint when called from gadget driver.
+ */
+static int s3c_hsudc_queue(struct usb_ep *_ep, struct usb_request *_req,
+			gfp_t gfp_flags)
+{
+	struct s3c_hsudc_req *hsreq;
+	struct s3c_hsudc_ep *hsep;
+	struct s3c_hsudc *hsudc;
+	unsigned long flags;
+	u32 offset;
+	u32 csr;
+
+	hsreq = our_req(_req);
+	if ((!_req || !_req->complete || !_req->buf ||
+		!list_empty(&hsreq->queue)))
+		return -EINVAL;
+
+	hsep = our_ep(_ep);
+	hsudc = hsep->dev;
+	if (!hsudc->driver || hsudc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&hsudc->lock, flags);
+	set_index(hsudc, hsep->bEndpointAddress);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	if (!ep_index(hsep) && _req->length == 0) {
+		hsudc->ep0state = WAIT_FOR_SETUP;
+		s3c_hsudc_complete_request(hsep, hsreq, 0);
+		spin_unlock_irqrestore(&hsudc->lock, flags);
+		return 0;
+	}
+
+	if (list_empty(&hsep->queue) && !hsep->stopped) {
+		offset = (ep_index(hsep)) ? S3C_ESR : S3C_EP0SR;
+		if (ep_is_in(hsep)) {
+			csr = readl(hsudc->regs + offset);
+			if (!(csr & S3C_ESR_TX_SUCCESS) &&
+				(s3c_hsudc_write_fifo(hsep, hsreq) == 1))
+				hsreq = NULL;
+		} else {
+			csr = readl(hsudc->regs + offset);
+			if ((csr & S3C_ESR_RX_SUCCESS)
+				   && (s3c_hsudc_read_fifo(hsep, hsreq) == 1))
+				hsreq = NULL;
+		}
+	}
+
+	if (hsreq)
+		list_add_tail(&hsreq->queue, &hsep->queue);
+
+	spin_unlock_irqrestore(&hsudc->lock, flags);
+	return 0;
+}
+
+/**
+ * s3c_hsudc_dequeue - Dequeue a transfer request from an endpoint.
+ * @_ep: Endpoint from which the request is dequeued.
+ * @_req: Request to be dequeued.
+ *
+ * Dequeue a request from a endpoint when called from gadget driver.
+ */
+static int s3c_hsudc_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct s3c_hsudc_ep *hsep = our_ep(_ep);
+	struct s3c_hsudc *hsudc = hsep->dev;
+	struct s3c_hsudc_req *hsreq = NULL, *iter;
+	unsigned long flags;
+
+	hsep = our_ep(_ep);
+	if (!_ep || hsep->ep.name == ep0name)
+		return -EINVAL;
+
+	spin_lock_irqsave(&hsudc->lock, flags);
+
+	list_for_each_entry(iter, &hsep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		hsreq = iter;
+		break;
+	}
+	if (!hsreq) {
+		spin_unlock_irqrestore(&hsudc->lock, flags);
+		return -EINVAL;
+	}
+
+	set_index(hsudc, hsep->bEndpointAddress);
+	s3c_hsudc_complete_request(hsep, hsreq, -ECONNRESET);
+
+	spin_unlock_irqrestore(&hsudc->lock, flags);
+	return 0;
+}
+
+static const struct usb_ep_ops s3c_hsudc_ep_ops = {
+	.enable = s3c_hsudc_ep_enable,
+	.disable = s3c_hsudc_ep_disable,
+	.alloc_request = s3c_hsudc_alloc_request,
+	.free_request = s3c_hsudc_free_request,
+	.queue = s3c_hsudc_queue,
+	.dequeue = s3c_hsudc_dequeue,
+	.set_halt = s3c_hsudc_set_halt,
+	.set_wedge = s3c_hsudc_set_wedge,
+};
+
+/**
+ * s3c_hsudc_initep - Initialize a endpoint to default state.
+ * @hsudc - Reference to the device controller.
+ * @hsep - Endpoint to be initialized.
+ * @epnum - Address to be assigned to the endpoint.
+ *
+ * Initialize a endpoint with default configuration.
+ */
+static void s3c_hsudc_initep(struct s3c_hsudc *hsudc,
+				struct s3c_hsudc_ep *hsep, int epnum)
+{
+	char *dir;
+
+	if ((epnum % 2) == 0) {
+		dir = "out";
+	} else {
+		dir = "in";
+		hsep->bEndpointAddress = USB_DIR_IN;
+	}
+
+	hsep->bEndpointAddress |= epnum;
+	if (epnum)
+		snprintf(hsep->name, sizeof(hsep->name), "ep%d%s", epnum, dir);
+	else
+		snprintf(hsep->name, sizeof(hsep->name), "%s", ep0name);
+
+	INIT_LIST_HEAD(&hsep->queue);
+	INIT_LIST_HEAD(&hsep->ep.ep_list);
+	if (epnum)
+		list_add_tail(&hsep->ep.ep_list, &hsudc->gadget.ep_list);
+
+	hsep->dev = hsudc;
+	hsep->ep.name = hsep->name;
+	usb_ep_set_maxpacket_limit(&hsep->ep, epnum ? 512 : 64);
+	hsep->ep.ops = &s3c_hsudc_ep_ops;
+	hsep->fifo = hsudc->regs + S3C_BR(epnum);
+	hsep->ep.desc = NULL;
+	hsep->stopped = 0;
+	hsep->wedge = 0;
+
+	if (epnum == 0) {
+		hsep->ep.caps.type_control = true;
+		hsep->ep.caps.dir_in = true;
+		hsep->ep.caps.dir_out = true;
+	} else {
+		hsep->ep.caps.type_iso = true;
+		hsep->ep.caps.type_bulk = true;
+		hsep->ep.caps.type_int = true;
+	}
+
+	if (epnum & 1)
+		hsep->ep.caps.dir_in = true;
+	else
+		hsep->ep.caps.dir_out = true;
+
+	set_index(hsudc, epnum);
+	writel(hsep->ep.maxpacket, hsudc->regs + S3C_MPR);
+}
+
+/**
+ * s3c_hsudc_setup_ep - Configure all endpoints to default state.
+ * @hsudc: Reference to device controller.
+ *
+ * Configures all endpoints to default state.
+ */
+static void s3c_hsudc_setup_ep(struct s3c_hsudc *hsudc)
+{
+	int epnum;
+
+	hsudc->ep0state = WAIT_FOR_SETUP;
+	INIT_LIST_HEAD(&hsudc->gadget.ep_list);
+	for (epnum = 0; epnum < hsudc->pd->epnum; epnum++)
+		s3c_hsudc_initep(hsudc, &hsudc->ep[epnum], epnum);
+}
+
+/**
+ * s3c_hsudc_reconfig - Reconfigure the device controller to default state.
+ * @hsudc: Reference to device controller.
+ *
+ * Reconfigures the device controller registers to a default state.
+ */
+static void s3c_hsudc_reconfig(struct s3c_hsudc *hsudc)
+{
+	writel(0xAA, hsudc->regs + S3C_EDR);
+	writel(1, hsudc->regs + S3C_EIER);
+	writel(0, hsudc->regs + S3C_TR);
+	writel(S3C_SCR_DTZIEN_EN | S3C_SCR_RRD_EN | S3C_SCR_SUS_EN |
+			S3C_SCR_RST_EN, hsudc->regs + S3C_SCR);
+	writel(0, hsudc->regs + S3C_EP0CR);
+
+	s3c_hsudc_setup_ep(hsudc);
+}
+
+/**
+ * s3c_hsudc_irq - Interrupt handler for device controller.
+ * @irq: Not used.
+ * @_dev: Reference to the device controller.
+ *
+ * Interrupt handler for the device controller. This handler handles controller
+ * interrupts and endpoint interrupts.
+ */
+static irqreturn_t s3c_hsudc_irq(int irq, void *_dev)
+{
+	struct s3c_hsudc *hsudc = _dev;
+	struct s3c_hsudc_ep *hsep;
+	u32 ep_intr;
+	u32 sys_status;
+	u32 ep_idx;
+
+	spin_lock(&hsudc->lock);
+
+	sys_status = readl(hsudc->regs + S3C_SSR);
+	ep_intr = readl(hsudc->regs + S3C_EIR) & 0x3FF;
+
+	if (!ep_intr && !(sys_status & S3C_SSR_DTZIEN_EN)) {
+		spin_unlock(&hsudc->lock);
+		return IRQ_HANDLED;
+	}
+
+	if (sys_status) {
+		if (sys_status & S3C_SSR_VBUSON)
+			writel(S3C_SSR_VBUSON, hsudc->regs + S3C_SSR);
+
+		if (sys_status & S3C_SSR_ERR)
+			writel(S3C_SSR_ERR, hsudc->regs + S3C_SSR);
+
+		if (sys_status & S3C_SSR_SDE) {
+			writel(S3C_SSR_SDE, hsudc->regs + S3C_SSR);
+			hsudc->gadget.speed = (sys_status & S3C_SSR_HSP) ?
+				USB_SPEED_HIGH : USB_SPEED_FULL;
+		}
+
+		if (sys_status & S3C_SSR_SUSPEND) {
+			writel(S3C_SSR_SUSPEND, hsudc->regs + S3C_SSR);
+			if (hsudc->gadget.speed != USB_SPEED_UNKNOWN
+				&& hsudc->driver && hsudc->driver->suspend)
+				hsudc->driver->suspend(&hsudc->gadget);
+		}
+
+		if (sys_status & S3C_SSR_RESUME) {
+			writel(S3C_SSR_RESUME, hsudc->regs + S3C_SSR);
+			if (hsudc->gadget.speed != USB_SPEED_UNKNOWN
+				&& hsudc->driver && hsudc->driver->resume)
+				hsudc->driver->resume(&hsudc->gadget);
+		}
+
+		if (sys_status & S3C_SSR_RESET) {
+			writel(S3C_SSR_RESET, hsudc->regs + S3C_SSR);
+			for (ep_idx = 0; ep_idx < hsudc->pd->epnum; ep_idx++) {
+				hsep = &hsudc->ep[ep_idx];
+				hsep->stopped = 1;
+				s3c_hsudc_nuke_ep(hsep, -ECONNRESET);
+			}
+			s3c_hsudc_reconfig(hsudc);
+			hsudc->ep0state = WAIT_FOR_SETUP;
+		}
+	}
+
+	if (ep_intr & S3C_EIR_EP0) {
+		writel(S3C_EIR_EP0, hsudc->regs + S3C_EIR);
+		set_index(hsudc, 0);
+		s3c_hsudc_handle_ep0_intr(hsudc);
+	}
+
+	ep_intr >>= 1;
+	ep_idx = 1;
+	while (ep_intr) {
+		if (ep_intr & 1)  {
+			hsep = &hsudc->ep[ep_idx];
+			set_index(hsudc, ep_idx);
+			writel(1 << ep_idx, hsudc->regs + S3C_EIR);
+			if (ep_is_in(hsep))
+				s3c_hsudc_epin_intr(hsudc, ep_idx);
+			else
+				s3c_hsudc_epout_intr(hsudc, ep_idx);
+		}
+		ep_intr >>= 1;
+		ep_idx++;
+	}
+
+	spin_unlock(&hsudc->lock);
+	return IRQ_HANDLED;
+}
+
+static int s3c_hsudc_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct s3c_hsudc *hsudc = to_hsudc(gadget);
+	int ret;
+
+	if (!driver
+		|| driver->max_speed < USB_SPEED_FULL
+		|| !driver->setup)
+		return -EINVAL;
+
+	if (!hsudc)
+		return -ENODEV;
+
+	if (hsudc->driver)
+		return -EBUSY;
+
+	hsudc->driver = driver;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(hsudc->supplies),
+				    hsudc->supplies);
+	if (ret != 0) {
+		dev_err(hsudc->dev, "failed to enable supplies: %d\n", ret);
+		goto err_supplies;
+	}
+
+	/* connect to bus through transceiver */
+	if (!IS_ERR_OR_NULL(hsudc->transceiver)) {
+		ret = otg_set_peripheral(hsudc->transceiver->otg,
+					&hsudc->gadget);
+		if (ret) {
+			dev_err(hsudc->dev, "%s: can't bind to transceiver\n",
+					hsudc->gadget.name);
+			goto err_otg;
+		}
+	}
+
+	enable_irq(hsudc->irq);
+	s3c_hsudc_reconfig(hsudc);
+
+	pm_runtime_get_sync(hsudc->dev);
+
+	if (hsudc->pd->phy_init)
+		hsudc->pd->phy_init();
+	if (hsudc->pd->gpio_init)
+		hsudc->pd->gpio_init();
+
+	return 0;
+err_otg:
+	regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
+err_supplies:
+	hsudc->driver = NULL;
+	return ret;
+}
+
+static int s3c_hsudc_stop(struct usb_gadget *gadget)
+{
+	struct s3c_hsudc *hsudc = to_hsudc(gadget);
+	unsigned long flags;
+
+	if (!hsudc)
+		return -ENODEV;
+
+	spin_lock_irqsave(&hsudc->lock, flags);
+	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
+	if (hsudc->pd->phy_uninit)
+		hsudc->pd->phy_uninit();
+
+	pm_runtime_put(hsudc->dev);
+
+	if (hsudc->pd->gpio_uninit)
+		hsudc->pd->gpio_uninit();
+	s3c_hsudc_stop_activity(hsudc);
+	spin_unlock_irqrestore(&hsudc->lock, flags);
+
+	if (!IS_ERR_OR_NULL(hsudc->transceiver))
+		(void) otg_set_peripheral(hsudc->transceiver->otg, NULL);
+
+	disable_irq(hsudc->irq);
+
+	regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
+	hsudc->driver = NULL;
+
+	return 0;
+}
+
+static inline u32 s3c_hsudc_read_frameno(struct s3c_hsudc *hsudc)
+{
+	return readl(hsudc->regs + S3C_FNR) & 0x3FF;
+}
+
+static int s3c_hsudc_gadget_getframe(struct usb_gadget *gadget)
+{
+	return s3c_hsudc_read_frameno(to_hsudc(gadget));
+}
+
+static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	struct s3c_hsudc *hsudc = to_hsudc(gadget);
+
+	if (!hsudc)
+		return -ENODEV;
+
+	if (!IS_ERR_OR_NULL(hsudc->transceiver))
+		return usb_phy_set_power(hsudc->transceiver, mA);
+
+	return -EOPNOTSUPP;
+}
+
+static const struct usb_gadget_ops s3c_hsudc_gadget_ops = {
+	.get_frame	= s3c_hsudc_gadget_getframe,
+	.udc_start	= s3c_hsudc_start,
+	.udc_stop	= s3c_hsudc_stop,
+	.vbus_draw	= s3c_hsudc_vbus_draw,
+};
+
+static int s3c_hsudc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct s3c_hsudc *hsudc;
+	struct s3c24xx_hsudc_platdata *pd = dev_get_platdata(&pdev->dev);
+	int ret, i;
+
+	hsudc = devm_kzalloc(&pdev->dev, struct_size(hsudc, ep, pd->epnum),
+			     GFP_KERNEL);
+	if (!hsudc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, dev);
+	hsudc->dev = dev;
+	hsudc->pd = dev_get_platdata(&pdev->dev);
+
+	hsudc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+
+	for (i = 0; i < ARRAY_SIZE(hsudc->supplies); i++)
+		hsudc->supplies[i].supply = s3c_hsudc_supply_names[i];
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hsudc->supplies),
+				 hsudc->supplies);
+	if (ret != 0) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to request supplies: %d\n", ret);
+		goto err_supplies;
+	}
+
+	hsudc->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(hsudc->regs)) {
+		ret = PTR_ERR(hsudc->regs);
+		goto err_res;
+	}
+
+	spin_lock_init(&hsudc->lock);
+
+	hsudc->gadget.max_speed = USB_SPEED_HIGH;
+	hsudc->gadget.ops = &s3c_hsudc_gadget_ops;
+	hsudc->gadget.name = dev_name(dev);
+	hsudc->gadget.ep0 = &hsudc->ep[0].ep;
+	hsudc->gadget.is_otg = 0;
+	hsudc->gadget.is_a_peripheral = 0;
+	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
+
+	s3c_hsudc_setup_ep(hsudc);
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		goto err_res;
+	hsudc->irq = ret;
+
+	ret = devm_request_irq(&pdev->dev, hsudc->irq, s3c_hsudc_irq, 0,
+				driver_name, hsudc);
+	if (ret < 0) {
+		dev_err(dev, "irq request failed\n");
+		goto err_res;
+	}
+
+	hsudc->uclk = devm_clk_get(&pdev->dev, "usb-device");
+	if (IS_ERR(hsudc->uclk)) {
+		dev_err(dev, "failed to find usb-device clock source\n");
+		ret = PTR_ERR(hsudc->uclk);
+		goto err_res;
+	}
+	clk_enable(hsudc->uclk);
+
+	local_irq_disable();
+
+	disable_irq(hsudc->irq);
+	local_irq_enable();
+
+	ret = usb_add_gadget_udc(&pdev->dev, &hsudc->gadget);
+	if (ret)
+		goto err_add_udc;
+
+	pm_runtime_enable(dev);
+
+	return 0;
+err_add_udc:
+	clk_disable(hsudc->uclk);
+err_res:
+	if (!IS_ERR_OR_NULL(hsudc->transceiver))
+		usb_put_phy(hsudc->transceiver);
+
+err_supplies:
+	return ret;
+}
+
+static struct platform_driver s3c_hsudc_driver = {
+	.driver		= {
+		.name	= "s3c-hsudc",
+	},
+	.probe		= s3c_hsudc_probe,
+};
+
+module_platform_driver(s3c_hsudc_driver);
+
+MODULE_DESCRIPTION("Samsung S3C24XX USB high-speed controller driver");
+MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c-hsudc");
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
new file mode 100644
index 000000000..8c57b191e
--- /dev/null
+++ b/drivers/usb/gadget/udc/s3c2410_udc.c
@@ -0,0 +1,1980 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * linux/drivers/usb/gadget/s3c2410_udc.c
+ *
+ * Samsung S3C24xx series on-chip full speed USB device controllers
+ *
+ * Copyright (C) 2004-2007 Herbert Pötzl - Arnaud Patard
+ *	Additional cleanups by Ben Dooks <ben-linux@fluff.org>
+ */
+
+#define pr_fmt(fmt) "s3c2410_udc: " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/prefetch.h>
+#include <linux/io.h>
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include <linux/usb.h>
+#include <linux/usb/gadget.h>
+
+#include <asm/byteorder.h>
+#include <asm/irq.h>
+#include <asm/unaligned.h>
+
+#include <linux/platform_data/usb-s3c2410_udc.h>
+
+#include "s3c2410_udc.h"
+#include "s3c2410_udc_regs.h"
+
+#define DRIVER_DESC	"S3C2410 USB Device Controller Gadget"
+#define DRIVER_AUTHOR	"Herbert Pötzl <herbert@13thfloor.at>, " \
+			"Arnaud Patard <arnaud.patard@rtp-net.org>"
+
+static const char		gadget_name[] = "s3c2410_udc";
+static const char		driver_desc[] = DRIVER_DESC;
+
+static struct s3c2410_udc	*the_controller;
+static struct clk		*udc_clock;
+static struct clk		*usb_bus_clock;
+static void __iomem		*base_addr;
+static int			irq_usbd;
+static struct dentry		*s3c2410_udc_debugfs_root;
+
+static inline u32 udc_read(u32 reg)
+{
+	return readb(base_addr + reg);
+}
+
+static inline void udc_write(u32 value, u32 reg)
+{
+	writeb(value, base_addr + reg);
+}
+
+static inline void udc_writeb(void __iomem *base, u32 value, u32 reg)
+{
+	writeb(value, base + reg);
+}
+
+static struct s3c2410_udc_mach_info *udc_info;
+
+/*************************** DEBUG FUNCTION ***************************/
+#define DEBUG_NORMAL	1
+#define DEBUG_VERBOSE	2
+
+#ifdef CONFIG_USB_S3C2410_DEBUG
+#define USB_S3C2410_DEBUG_LEVEL 0
+
+static uint32_t s3c2410_ticks = 0;
+
+__printf(2, 3)
+static void dprintk(int level, const char *fmt, ...)
+{
+	static long prevticks;
+	static int invocation;
+	struct va_format vaf;
+	va_list args;
+
+	if (level > USB_S3C2410_DEBUG_LEVEL)
+		return;
+
+	va_start(args, fmt);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	if (s3c2410_ticks != prevticks) {
+		prevticks = s3c2410_ticks;
+		invocation = 0;
+	}
+
+	pr_debug("%1lu.%02d USB: %pV", prevticks, invocation++, &vaf);
+
+	va_end(args);
+}
+#else
+__printf(2, 3)
+static void dprintk(int level, const char *fmt, ...)
+{
+}
+#endif
+
+static int s3c2410_udc_debugfs_show(struct seq_file *m, void *p)
+{
+	u32 addr_reg, pwr_reg, ep_int_reg, usb_int_reg;
+	u32 ep_int_en_reg, usb_int_en_reg, ep0_csr;
+	u32 ep1_i_csr1, ep1_i_csr2, ep1_o_csr1, ep1_o_csr2;
+	u32 ep2_i_csr1, ep2_i_csr2, ep2_o_csr1, ep2_o_csr2;
+
+	addr_reg       = udc_read(S3C2410_UDC_FUNC_ADDR_REG);
+	pwr_reg        = udc_read(S3C2410_UDC_PWR_REG);
+	ep_int_reg     = udc_read(S3C2410_UDC_EP_INT_REG);
+	usb_int_reg    = udc_read(S3C2410_UDC_USB_INT_REG);
+	ep_int_en_reg  = udc_read(S3C2410_UDC_EP_INT_EN_REG);
+	usb_int_en_reg = udc_read(S3C2410_UDC_USB_INT_EN_REG);
+	udc_write(0, S3C2410_UDC_INDEX_REG);
+	ep0_csr        = udc_read(S3C2410_UDC_IN_CSR1_REG);
+	udc_write(1, S3C2410_UDC_INDEX_REG);
+	ep1_i_csr1     = udc_read(S3C2410_UDC_IN_CSR1_REG);
+	ep1_i_csr2     = udc_read(S3C2410_UDC_IN_CSR2_REG);
+	ep1_o_csr1     = udc_read(S3C2410_UDC_IN_CSR1_REG);
+	ep1_o_csr2     = udc_read(S3C2410_UDC_IN_CSR2_REG);
+	udc_write(2, S3C2410_UDC_INDEX_REG);
+	ep2_i_csr1     = udc_read(S3C2410_UDC_IN_CSR1_REG);
+	ep2_i_csr2     = udc_read(S3C2410_UDC_IN_CSR2_REG);
+	ep2_o_csr1     = udc_read(S3C2410_UDC_IN_CSR1_REG);
+	ep2_o_csr2     = udc_read(S3C2410_UDC_IN_CSR2_REG);
+
+	seq_printf(m, "FUNC_ADDR_REG  : 0x%04X\n"
+		 "PWR_REG        : 0x%04X\n"
+		 "EP_INT_REG     : 0x%04X\n"
+		 "USB_INT_REG    : 0x%04X\n"
+		 "EP_INT_EN_REG  : 0x%04X\n"
+		 "USB_INT_EN_REG : 0x%04X\n"
+		 "EP0_CSR        : 0x%04X\n"
+		 "EP1_I_CSR1     : 0x%04X\n"
+		 "EP1_I_CSR2     : 0x%04X\n"
+		 "EP1_O_CSR1     : 0x%04X\n"
+		 "EP1_O_CSR2     : 0x%04X\n"
+		 "EP2_I_CSR1     : 0x%04X\n"
+		 "EP2_I_CSR2     : 0x%04X\n"
+		 "EP2_O_CSR1     : 0x%04X\n"
+		 "EP2_O_CSR2     : 0x%04X\n",
+			addr_reg, pwr_reg, ep_int_reg, usb_int_reg,
+			ep_int_en_reg, usb_int_en_reg, ep0_csr,
+			ep1_i_csr1, ep1_i_csr2, ep1_o_csr1, ep1_o_csr2,
+			ep2_i_csr1, ep2_i_csr2, ep2_o_csr1, ep2_o_csr2
+		);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(s3c2410_udc_debugfs);
+
+/* io macros */
+
+static inline void s3c2410_udc_clear_ep0_opr(void __iomem *base)
+{
+	udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
+	udc_writeb(base, S3C2410_UDC_EP0_CSR_SOPKTRDY,
+			S3C2410_UDC_EP0_CSR_REG);
+}
+
+static inline void s3c2410_udc_clear_ep0_sst(void __iomem *base)
+{
+	udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
+	writeb(0x00, base + S3C2410_UDC_EP0_CSR_REG);
+}
+
+static inline void s3c2410_udc_clear_ep0_se(void __iomem *base)
+{
+	udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
+	udc_writeb(base, S3C2410_UDC_EP0_CSR_SSE, S3C2410_UDC_EP0_CSR_REG);
+}
+
+static inline void s3c2410_udc_set_ep0_ipr(void __iomem *base)
+{
+	udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
+	udc_writeb(base, S3C2410_UDC_EP0_CSR_IPKRDY, S3C2410_UDC_EP0_CSR_REG);
+}
+
+static inline void s3c2410_udc_set_ep0_de(void __iomem *base)
+{
+	udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
+	udc_writeb(base, S3C2410_UDC_EP0_CSR_DE, S3C2410_UDC_EP0_CSR_REG);
+}
+
+static inline void s3c2410_udc_set_ep0_ss(void __iomem *b)
+{
+	udc_writeb(b, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
+	udc_writeb(b, S3C2410_UDC_EP0_CSR_SENDSTL, S3C2410_UDC_EP0_CSR_REG);
+}
+
+static inline void s3c2410_udc_set_ep0_de_out(void __iomem *base)
+{
+	udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
+
+	udc_writeb(base, (S3C2410_UDC_EP0_CSR_SOPKTRDY
+				| S3C2410_UDC_EP0_CSR_DE),
+			S3C2410_UDC_EP0_CSR_REG);
+}
+
+static inline void s3c2410_udc_set_ep0_de_in(void __iomem *base)
+{
+	udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
+	udc_writeb(base, (S3C2410_UDC_EP0_CSR_IPKRDY
+			| S3C2410_UDC_EP0_CSR_DE),
+		S3C2410_UDC_EP0_CSR_REG);
+}
+
+/*------------------------- I/O ----------------------------------*/
+
+/*
+ *	s3c2410_udc_done
+ */
+static void s3c2410_udc_done(struct s3c2410_ep *ep,
+		struct s3c2410_request *req, int status)
+{
+	unsigned halted = ep->halted;
+
+	list_del_init(&req->queue);
+
+	if (likely(req->req.status == -EINPROGRESS))
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	ep->halted = 1;
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	ep->halted = halted;
+}
+
+static void s3c2410_udc_nuke(struct s3c2410_udc *udc,
+		struct s3c2410_ep *ep, int status)
+{
+	while (!list_empty(&ep->queue)) {
+		struct s3c2410_request *req;
+		req = list_entry(ep->queue.next, struct s3c2410_request,
+				queue);
+		s3c2410_udc_done(ep, req, status);
+	}
+}
+
+static inline int s3c2410_udc_fifo_count_out(void)
+{
+	int tmp;
+
+	tmp = udc_read(S3C2410_UDC_OUT_FIFO_CNT2_REG) << 8;
+	tmp |= udc_read(S3C2410_UDC_OUT_FIFO_CNT1_REG);
+	return tmp;
+}
+
+/*
+ *	s3c2410_udc_write_packet
+ */
+static inline int s3c2410_udc_write_packet(int fifo,
+		struct s3c2410_request *req,
+		unsigned max)
+{
+	unsigned len = min(req->req.length - req->req.actual, max);
+	u8 *buf = req->req.buf + req->req.actual;
+
+	prefetch(buf);
+
+	dprintk(DEBUG_VERBOSE, "%s %d %d %d %d\n", __func__,
+		req->req.actual, req->req.length, len, req->req.actual + len);
+
+	req->req.actual += len;
+
+	udelay(5);
+	writesb(base_addr + fifo, buf, len);
+	return len;
+}
+
+/*
+ *	s3c2410_udc_write_fifo
+ *
+ * return:  0 = still running, 1 = completed, negative = errno
+ */
+static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep,
+		struct s3c2410_request *req)
+{
+	unsigned	count;
+	int		is_last;
+	u32		idx;
+	int		fifo_reg;
+	u32		ep_csr;
+
+	idx = ep->bEndpointAddress & 0x7F;
+	switch (idx) {
+	default:
+		idx = 0;
+		fallthrough;
+	case 0:
+		fifo_reg = S3C2410_UDC_EP0_FIFO_REG;
+		break;
+	case 1:
+		fifo_reg = S3C2410_UDC_EP1_FIFO_REG;
+		break;
+	case 2:
+		fifo_reg = S3C2410_UDC_EP2_FIFO_REG;
+		break;
+	case 3:
+		fifo_reg = S3C2410_UDC_EP3_FIFO_REG;
+		break;
+	case 4:
+		fifo_reg = S3C2410_UDC_EP4_FIFO_REG;
+		break;
+	}
+
+	count = s3c2410_udc_write_packet(fifo_reg, req, ep->ep.maxpacket);
+
+	/* last packet is often short (sometimes a zlp) */
+	if (count != ep->ep.maxpacket)
+		is_last = 1;
+	else if (req->req.length != req->req.actual || req->req.zero)
+		is_last = 0;
+	else
+		is_last = 2;
+
+	/* Only ep0 debug messages are interesting */
+	if (idx == 0)
+		dprintk(DEBUG_NORMAL,
+			"Written ep%d %d.%d of %d b [last %d,z %d]\n",
+			idx, count, req->req.actual, req->req.length,
+			is_last, req->req.zero);
+
+	if (is_last) {
+		/* The order is important. It prevents sending 2 packets
+		 * at the same time */
+
+		if (idx == 0) {
+			/* Reset signal => no need to say 'data sent' */
+			if (!(udc_read(S3C2410_UDC_USB_INT_REG)
+					& S3C2410_UDC_USBINT_RESET))
+				s3c2410_udc_set_ep0_de_in(base_addr);
+			ep->dev->ep0state = EP0_IDLE;
+		} else {
+			udc_write(idx, S3C2410_UDC_INDEX_REG);
+			ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG);
+			udc_write(idx, S3C2410_UDC_INDEX_REG);
+			udc_write(ep_csr | S3C2410_UDC_ICSR1_PKTRDY,
+					S3C2410_UDC_IN_CSR1_REG);
+		}
+
+		s3c2410_udc_done(ep, req, 0);
+		is_last = 1;
+	} else {
+		if (idx == 0) {
+			/* Reset signal => no need to say 'data sent' */
+			if (!(udc_read(S3C2410_UDC_USB_INT_REG)
+					& S3C2410_UDC_USBINT_RESET))
+				s3c2410_udc_set_ep0_ipr(base_addr);
+		} else {
+			udc_write(idx, S3C2410_UDC_INDEX_REG);
+			ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG);
+			udc_write(idx, S3C2410_UDC_INDEX_REG);
+			udc_write(ep_csr | S3C2410_UDC_ICSR1_PKTRDY,
+					S3C2410_UDC_IN_CSR1_REG);
+		}
+	}
+
+	return is_last;
+}
+
+static inline int s3c2410_udc_read_packet(int fifo, u8 *buf,
+		struct s3c2410_request *req, unsigned avail)
+{
+	unsigned len;
+
+	len = min(req->req.length - req->req.actual, avail);
+	req->req.actual += len;
+
+	readsb(fifo + base_addr, buf, len);
+	return len;
+}
+
+/*
+ * return:  0 = still running, 1 = queue empty, negative = errno
+ */
+static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep,
+				 struct s3c2410_request *req)
+{
+	u8		*buf;
+	u32		ep_csr;
+	unsigned	bufferspace;
+	int		is_last = 1;
+	unsigned	avail;
+	int		fifo_count = 0;
+	u32		idx;
+	int		fifo_reg;
+
+	idx = ep->bEndpointAddress & 0x7F;
+
+	switch (idx) {
+	default:
+		idx = 0;
+		fallthrough;
+	case 0:
+		fifo_reg = S3C2410_UDC_EP0_FIFO_REG;
+		break;
+	case 1:
+		fifo_reg = S3C2410_UDC_EP1_FIFO_REG;
+		break;
+	case 2:
+		fifo_reg = S3C2410_UDC_EP2_FIFO_REG;
+		break;
+	case 3:
+		fifo_reg = S3C2410_UDC_EP3_FIFO_REG;
+		break;
+	case 4:
+		fifo_reg = S3C2410_UDC_EP4_FIFO_REG;
+		break;
+	}
+
+	if (!req->req.length)
+		return 1;
+
+	buf = req->req.buf + req->req.actual;
+	bufferspace = req->req.length - req->req.actual;
+	if (!bufferspace) {
+		dprintk(DEBUG_NORMAL, "%s: buffer full!\n", __func__);
+		return -1;
+	}
+
+	udc_write(idx, S3C2410_UDC_INDEX_REG);
+
+	fifo_count = s3c2410_udc_fifo_count_out();
+	dprintk(DEBUG_NORMAL, "%s fifo count : %d\n", __func__, fifo_count);
+
+	if (fifo_count > ep->ep.maxpacket)
+		avail = ep->ep.maxpacket;
+	else
+		avail = fifo_count;
+
+	fifo_count = s3c2410_udc_read_packet(fifo_reg, buf, req, avail);
+
+	/* checking this with ep0 is not accurate as we already
+	 * read a control request
+	 **/
+	if (idx != 0 && fifo_count < ep->ep.maxpacket) {
+		is_last = 1;
+		/* overflowed this request?  flush extra data */
+		if (fifo_count != avail)
+			req->req.status = -EOVERFLOW;
+	} else {
+		is_last = (req->req.length <= req->req.actual) ? 1 : 0;
+	}
+
+	udc_write(idx, S3C2410_UDC_INDEX_REG);
+	fifo_count = s3c2410_udc_fifo_count_out();
+
+	/* Only ep0 debug messages are interesting */
+	if (idx == 0)
+		dprintk(DEBUG_VERBOSE, "%s fifo count : %d [last %d]\n",
+			__func__, fifo_count, is_last);
+
+	if (is_last) {
+		if (idx == 0) {
+			s3c2410_udc_set_ep0_de_out(base_addr);
+			ep->dev->ep0state = EP0_IDLE;
+		} else {
+			udc_write(idx, S3C2410_UDC_INDEX_REG);
+			ep_csr = udc_read(S3C2410_UDC_OUT_CSR1_REG);
+			udc_write(idx, S3C2410_UDC_INDEX_REG);
+			udc_write(ep_csr & ~S3C2410_UDC_OCSR1_PKTRDY,
+					S3C2410_UDC_OUT_CSR1_REG);
+		}
+
+		s3c2410_udc_done(ep, req, 0);
+	} else {
+		if (idx == 0) {
+			s3c2410_udc_clear_ep0_opr(base_addr);
+		} else {
+			udc_write(idx, S3C2410_UDC_INDEX_REG);
+			ep_csr = udc_read(S3C2410_UDC_OUT_CSR1_REG);
+			udc_write(idx, S3C2410_UDC_INDEX_REG);
+			udc_write(ep_csr & ~S3C2410_UDC_OCSR1_PKTRDY,
+					S3C2410_UDC_OUT_CSR1_REG);
+		}
+	}
+
+	return is_last;
+}
+
+static int s3c2410_udc_read_fifo_crq(struct usb_ctrlrequest *crq)
+{
+	unsigned char *outbuf = (unsigned char *)crq;
+	int bytes_read = 0;
+
+	udc_write(0, S3C2410_UDC_INDEX_REG);
+
+	bytes_read = s3c2410_udc_fifo_count_out();
+
+	dprintk(DEBUG_NORMAL, "%s: fifo_count=%d\n", __func__, bytes_read);
+
+	if (bytes_read > sizeof(struct usb_ctrlrequest))
+		bytes_read = sizeof(struct usb_ctrlrequest);
+
+	readsb(S3C2410_UDC_EP0_FIFO_REG + base_addr, outbuf, bytes_read);
+
+	dprintk(DEBUG_VERBOSE, "%s: len=%d %02x:%02x {%x,%x,%x}\n", __func__,
+		bytes_read, crq->bRequest, crq->bRequestType,
+		crq->wValue, crq->wIndex, crq->wLength);
+
+	return bytes_read;
+}
+
+static int s3c2410_udc_get_status(struct s3c2410_udc *dev,
+		struct usb_ctrlrequest *crq)
+{
+	u16 status = 0;
+	u8 ep_num = crq->wIndex & 0x7F;
+	u8 is_in = crq->wIndex & USB_DIR_IN;
+
+	switch (crq->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_INTERFACE:
+		break;
+
+	case USB_RECIP_DEVICE:
+		status = dev->devstatus;
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		if (ep_num > 4 || crq->wLength > 2)
+			return 1;
+
+		if (ep_num == 0) {
+			udc_write(0, S3C2410_UDC_INDEX_REG);
+			status = udc_read(S3C2410_UDC_IN_CSR1_REG);
+			status = status & S3C2410_UDC_EP0_CSR_SENDSTL;
+		} else {
+			udc_write(ep_num, S3C2410_UDC_INDEX_REG);
+			if (is_in) {
+				status = udc_read(S3C2410_UDC_IN_CSR1_REG);
+				status = status & S3C2410_UDC_ICSR1_SENDSTL;
+			} else {
+				status = udc_read(S3C2410_UDC_OUT_CSR1_REG);
+				status = status & S3C2410_UDC_OCSR1_SENDSTL;
+			}
+		}
+
+		status = status ? 1 : 0;
+		break;
+
+	default:
+		return 1;
+	}
+
+	/* Seems to be needed to get it working. ouch :( */
+	udelay(5);
+	udc_write(status & 0xFF, S3C2410_UDC_EP0_FIFO_REG);
+	udc_write(status >> 8, S3C2410_UDC_EP0_FIFO_REG);
+	s3c2410_udc_set_ep0_de_in(base_addr);
+
+	return 0;
+}
+/*------------------------- usb state machine -------------------------------*/
+static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value);
+
+static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
+					struct s3c2410_ep *ep,
+					struct usb_ctrlrequest *crq,
+					u32 ep0csr)
+{
+	int len, ret, tmp;
+
+	/* start control request? */
+	if (!(ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY))
+		return;
+
+	s3c2410_udc_nuke(dev, ep, -EPROTO);
+
+	len = s3c2410_udc_read_fifo_crq(crq);
+	if (len != sizeof(*crq)) {
+		dprintk(DEBUG_NORMAL, "setup begin: fifo READ ERROR"
+			" wanted %d bytes got %d. Stalling out...\n",
+			sizeof(*crq), len);
+		s3c2410_udc_set_ep0_ss(base_addr);
+		return;
+	}
+
+	dprintk(DEBUG_NORMAL, "bRequest = %d bRequestType %d wLength = %d\n",
+		crq->bRequest, crq->bRequestType, crq->wLength);
+
+	/* cope with automagic for some standard requests. */
+	dev->req_std = (crq->bRequestType & USB_TYPE_MASK)
+		== USB_TYPE_STANDARD;
+	dev->req_config = 0;
+	dev->req_pending = 1;
+
+	switch (crq->bRequest) {
+	case USB_REQ_SET_CONFIGURATION:
+		dprintk(DEBUG_NORMAL, "USB_REQ_SET_CONFIGURATION ...\n");
+
+		if (crq->bRequestType == USB_RECIP_DEVICE) {
+			dev->req_config = 1;
+			s3c2410_udc_set_ep0_de_out(base_addr);
+		}
+		break;
+
+	case USB_REQ_SET_INTERFACE:
+		dprintk(DEBUG_NORMAL, "USB_REQ_SET_INTERFACE ...\n");
+
+		if (crq->bRequestType == USB_RECIP_INTERFACE) {
+			dev->req_config = 1;
+			s3c2410_udc_set_ep0_de_out(base_addr);
+		}
+		break;
+
+	case USB_REQ_SET_ADDRESS:
+		dprintk(DEBUG_NORMAL, "USB_REQ_SET_ADDRESS ...\n");
+
+		if (crq->bRequestType == USB_RECIP_DEVICE) {
+			tmp = crq->wValue & 0x7F;
+			dev->address = tmp;
+			udc_write((tmp | S3C2410_UDC_FUNCADDR_UPDATE),
+					S3C2410_UDC_FUNC_ADDR_REG);
+			s3c2410_udc_set_ep0_de_out(base_addr);
+			return;
+		}
+		break;
+
+	case USB_REQ_GET_STATUS:
+		dprintk(DEBUG_NORMAL, "USB_REQ_GET_STATUS ...\n");
+		s3c2410_udc_clear_ep0_opr(base_addr);
+
+		if (dev->req_std) {
+			if (!s3c2410_udc_get_status(dev, crq))
+				return;
+		}
+		break;
+
+	case USB_REQ_CLEAR_FEATURE:
+		s3c2410_udc_clear_ep0_opr(base_addr);
+
+		if (crq->bRequestType != USB_RECIP_ENDPOINT)
+			break;
+
+		if (crq->wValue != USB_ENDPOINT_HALT || crq->wLength != 0)
+			break;
+
+		s3c2410_udc_set_halt(&dev->ep[crq->wIndex & 0x7f].ep, 0);
+		s3c2410_udc_set_ep0_de_out(base_addr);
+		return;
+
+	case USB_REQ_SET_FEATURE:
+		s3c2410_udc_clear_ep0_opr(base_addr);
+
+		if (crq->bRequestType != USB_RECIP_ENDPOINT)
+			break;
+
+		if (crq->wValue != USB_ENDPOINT_HALT || crq->wLength != 0)
+			break;
+
+		s3c2410_udc_set_halt(&dev->ep[crq->wIndex & 0x7f].ep, 1);
+		s3c2410_udc_set_ep0_de_out(base_addr);
+		return;
+
+	default:
+		s3c2410_udc_clear_ep0_opr(base_addr);
+		break;
+	}
+
+	if (crq->bRequestType & USB_DIR_IN)
+		dev->ep0state = EP0_IN_DATA_PHASE;
+	else
+		dev->ep0state = EP0_OUT_DATA_PHASE;
+
+	if (!dev->driver)
+		return;
+
+	/* deliver the request to the gadget driver */
+	ret = dev->driver->setup(&dev->gadget, crq);
+	if (ret < 0) {
+		if (dev->req_config) {
+			dprintk(DEBUG_NORMAL, "config change %02x fail %d?\n",
+				crq->bRequest, ret);
+			return;
+		}
+
+		if (ret == -EOPNOTSUPP)
+			dprintk(DEBUG_NORMAL, "Operation not supported\n");
+		else
+			dprintk(DEBUG_NORMAL,
+				"dev->driver->setup failed. (%d)\n", ret);
+
+		udelay(5);
+		s3c2410_udc_set_ep0_ss(base_addr);
+		s3c2410_udc_set_ep0_de_out(base_addr);
+		dev->ep0state = EP0_IDLE;
+		/* deferred i/o == no response yet */
+	} else if (dev->req_pending) {
+		dprintk(DEBUG_VERBOSE, "dev->req_pending... what now?\n");
+		dev->req_pending = 0;
+	}
+
+	dprintk(DEBUG_VERBOSE, "ep0state %s\n", ep0states[dev->ep0state]);
+}
+
+static void s3c2410_udc_handle_ep0(struct s3c2410_udc *dev)
+{
+	u32			ep0csr;
+	struct s3c2410_ep	*ep = &dev->ep[0];
+	struct s3c2410_request	*req;
+	struct usb_ctrlrequest	crq;
+
+	if (list_empty(&ep->queue))
+		req = NULL;
+	else
+		req = list_entry(ep->queue.next, struct s3c2410_request, queue);
+
+	/* We make the assumption that S3C2410_UDC_IN_CSR1_REG equal to
+	 * S3C2410_UDC_EP0_CSR_REG when index is zero */
+
+	udc_write(0, S3C2410_UDC_INDEX_REG);
+	ep0csr = udc_read(S3C2410_UDC_IN_CSR1_REG);
+
+	dprintk(DEBUG_NORMAL, "ep0csr %x ep0state %s\n",
+		ep0csr, ep0states[dev->ep0state]);
+
+	/* clear stall status */
+	if (ep0csr & S3C2410_UDC_EP0_CSR_SENTSTL) {
+		s3c2410_udc_nuke(dev, ep, -EPIPE);
+		dprintk(DEBUG_NORMAL, "... clear SENT_STALL ...\n");
+		s3c2410_udc_clear_ep0_sst(base_addr);
+		dev->ep0state = EP0_IDLE;
+		return;
+	}
+
+	/* clear setup end */
+	if (ep0csr & S3C2410_UDC_EP0_CSR_SE) {
+		dprintk(DEBUG_NORMAL, "... serviced SETUP_END ...\n");
+		s3c2410_udc_nuke(dev, ep, 0);
+		s3c2410_udc_clear_ep0_se(base_addr);
+		dev->ep0state = EP0_IDLE;
+	}
+
+	switch (dev->ep0state) {
+	case EP0_IDLE:
+		s3c2410_udc_handle_ep0_idle(dev, ep, &crq, ep0csr);
+		break;
+
+	case EP0_IN_DATA_PHASE:			/* GET_DESCRIPTOR etc */
+		dprintk(DEBUG_NORMAL, "EP0_IN_DATA_PHASE ... what now?\n");
+		if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY) && req)
+			s3c2410_udc_write_fifo(ep, req);
+		break;
+
+	case EP0_OUT_DATA_PHASE:		/* SET_DESCRIPTOR etc */
+		dprintk(DEBUG_NORMAL, "EP0_OUT_DATA_PHASE ... what now?\n");
+		if ((ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) && req)
+			s3c2410_udc_read_fifo(ep, req);
+		break;
+
+	case EP0_END_XFER:
+		dprintk(DEBUG_NORMAL, "EP0_END_XFER ... what now?\n");
+		dev->ep0state = EP0_IDLE;
+		break;
+
+	case EP0_STALL:
+		dprintk(DEBUG_NORMAL, "EP0_STALL ... what now?\n");
+		dev->ep0state = EP0_IDLE;
+		break;
+	}
+}
+
+/*
+ *	handle_ep - Manage I/O endpoints
+ */
+
+static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
+{
+	struct s3c2410_request	*req;
+	int			is_in = ep->bEndpointAddress & USB_DIR_IN;
+	u32			ep_csr1;
+	u32			idx;
+
+	if (likely(!list_empty(&ep->queue)))
+		req = list_entry(ep->queue.next,
+				struct s3c2410_request, queue);
+	else
+		req = NULL;
+
+	idx = ep->bEndpointAddress & 0x7F;
+
+	if (is_in) {
+		udc_write(idx, S3C2410_UDC_INDEX_REG);
+		ep_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG);
+		dprintk(DEBUG_VERBOSE, "ep%01d write csr:%02x %d\n",
+			idx, ep_csr1, req ? 1 : 0);
+
+		if (ep_csr1 & S3C2410_UDC_ICSR1_SENTSTL) {
+			dprintk(DEBUG_VERBOSE, "st\n");
+			udc_write(idx, S3C2410_UDC_INDEX_REG);
+			udc_write(ep_csr1 & ~S3C2410_UDC_ICSR1_SENTSTL,
+					S3C2410_UDC_IN_CSR1_REG);
+			return;
+		}
+
+		if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && req)
+			s3c2410_udc_write_fifo(ep, req);
+	} else {
+		udc_write(idx, S3C2410_UDC_INDEX_REG);
+		ep_csr1 = udc_read(S3C2410_UDC_OUT_CSR1_REG);
+		dprintk(DEBUG_VERBOSE, "ep%01d rd csr:%02x\n", idx, ep_csr1);
+
+		if (ep_csr1 & S3C2410_UDC_OCSR1_SENTSTL) {
+			udc_write(idx, S3C2410_UDC_INDEX_REG);
+			udc_write(ep_csr1 & ~S3C2410_UDC_OCSR1_SENTSTL,
+					S3C2410_UDC_OUT_CSR1_REG);
+			return;
+		}
+
+		if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req)
+			s3c2410_udc_read_fifo(ep, req);
+	}
+}
+
+/*
+ *	s3c2410_udc_irq - interrupt handler
+ */
+static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev)
+{
+	struct s3c2410_udc *dev = _dev;
+	int usb_status;
+	int usbd_status;
+	int pwr_reg;
+	int ep0csr;
+	int i;
+	u32 idx, idx2;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* Driver connected ? */
+	if (!dev->driver) {
+		/* Clear interrupts */
+		udc_write(udc_read(S3C2410_UDC_USB_INT_REG),
+				S3C2410_UDC_USB_INT_REG);
+		udc_write(udc_read(S3C2410_UDC_EP_INT_REG),
+				S3C2410_UDC_EP_INT_REG);
+	}
+
+	/* Save index */
+	idx = udc_read(S3C2410_UDC_INDEX_REG);
+
+	/* Read status registers */
+	usb_status = udc_read(S3C2410_UDC_USB_INT_REG);
+	usbd_status = udc_read(S3C2410_UDC_EP_INT_REG);
+	pwr_reg = udc_read(S3C2410_UDC_PWR_REG);
+
+	udc_writeb(base_addr, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
+	ep0csr = udc_read(S3C2410_UDC_IN_CSR1_REG);
+
+	dprintk(DEBUG_NORMAL, "usbs=%02x, usbds=%02x, pwr=%02x ep0csr=%02x\n",
+		usb_status, usbd_status, pwr_reg, ep0csr);
+
+	/*
+	 * Now, handle interrupts. There's two types :
+	 * - Reset, Resume, Suspend coming -> usb_int_reg
+	 * - EP -> ep_int_reg
+	 */
+
+	/* RESET */
+	if (usb_status & S3C2410_UDC_USBINT_RESET) {
+		/* two kind of reset :
+		 * - reset start -> pwr reg = 8
+		 * - reset end   -> pwr reg = 0
+		 **/
+		dprintk(DEBUG_NORMAL, "USB reset csr %x pwr %x\n",
+			ep0csr, pwr_reg);
+
+		dev->gadget.speed = USB_SPEED_UNKNOWN;
+		udc_write(0x00, S3C2410_UDC_INDEX_REG);
+		udc_write((dev->ep[0].ep.maxpacket & 0x7ff) >> 3,
+				S3C2410_UDC_MAXP_REG);
+		dev->address = 0;
+
+		dev->ep0state = EP0_IDLE;
+		dev->gadget.speed = USB_SPEED_FULL;
+
+		/* clear interrupt */
+		udc_write(S3C2410_UDC_USBINT_RESET,
+				S3C2410_UDC_USB_INT_REG);
+
+		udc_write(idx, S3C2410_UDC_INDEX_REG);
+		spin_unlock_irqrestore(&dev->lock, flags);
+		return IRQ_HANDLED;
+	}
+
+	/* RESUME */
+	if (usb_status & S3C2410_UDC_USBINT_RESUME) {
+		dprintk(DEBUG_NORMAL, "USB resume\n");
+
+		/* clear interrupt */
+		udc_write(S3C2410_UDC_USBINT_RESUME,
+				S3C2410_UDC_USB_INT_REG);
+
+		if (dev->gadget.speed != USB_SPEED_UNKNOWN
+				&& dev->driver
+				&& dev->driver->resume)
+			dev->driver->resume(&dev->gadget);
+	}
+
+	/* SUSPEND */
+	if (usb_status & S3C2410_UDC_USBINT_SUSPEND) {
+		dprintk(DEBUG_NORMAL, "USB suspend\n");
+
+		/* clear interrupt */
+		udc_write(S3C2410_UDC_USBINT_SUSPEND,
+				S3C2410_UDC_USB_INT_REG);
+
+		if (dev->gadget.speed != USB_SPEED_UNKNOWN
+				&& dev->driver
+				&& dev->driver->suspend)
+			dev->driver->suspend(&dev->gadget);
+
+		dev->ep0state = EP0_IDLE;
+	}
+
+	/* EP */
+	/* control traffic */
+	/* check on ep0csr != 0 is not a good idea as clearing in_pkt_ready
+	 * generate an interrupt
+	 */
+	if (usbd_status & S3C2410_UDC_INT_EP0) {
+		dprintk(DEBUG_VERBOSE, "USB ep0 irq\n");
+		/* Clear the interrupt bit by setting it to 1 */
+		udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_REG);
+		s3c2410_udc_handle_ep0(dev);
+	}
+
+	/* endpoint data transfers */
+	for (i = 1; i < S3C2410_ENDPOINTS; i++) {
+		u32 tmp = 1 << i;
+		if (usbd_status & tmp) {
+			dprintk(DEBUG_VERBOSE, "USB ep%d irq\n", i);
+
+			/* Clear the interrupt bit by setting it to 1 */
+			udc_write(tmp, S3C2410_UDC_EP_INT_REG);
+			s3c2410_udc_handle_ep(&dev->ep[i]);
+		}
+	}
+
+	/* what else causes this interrupt? a receive! who is it? */
+	if (!usb_status && !usbd_status && !pwr_reg && !ep0csr) {
+		for (i = 1; i < S3C2410_ENDPOINTS; i++) {
+			idx2 = udc_read(S3C2410_UDC_INDEX_REG);
+			udc_write(i, S3C2410_UDC_INDEX_REG);
+
+			if (udc_read(S3C2410_UDC_OUT_CSR1_REG) & 0x1)
+				s3c2410_udc_handle_ep(&dev->ep[i]);
+
+			/* restore index */
+			udc_write(idx2, S3C2410_UDC_INDEX_REG);
+		}
+	}
+
+	dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", irq_usbd);
+
+	/* Restore old index */
+	udc_write(idx, S3C2410_UDC_INDEX_REG);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return IRQ_HANDLED;
+}
+/*------------------------- s3c2410_ep_ops ----------------------------------*/
+
+static inline struct s3c2410_ep *to_s3c2410_ep(struct usb_ep *ep)
+{
+	return container_of(ep, struct s3c2410_ep, ep);
+}
+
+static inline struct s3c2410_udc *to_s3c2410_udc(struct usb_gadget *gadget)
+{
+	return container_of(gadget, struct s3c2410_udc, gadget);
+}
+
+static inline struct s3c2410_request *to_s3c2410_req(struct usb_request *req)
+{
+	return container_of(req, struct s3c2410_request, req);
+}
+
+/*
+ *	s3c2410_udc_ep_enable
+ */
+static int s3c2410_udc_ep_enable(struct usb_ep *_ep,
+				 const struct usb_endpoint_descriptor *desc)
+{
+	struct s3c2410_udc	*dev;
+	struct s3c2410_ep	*ep;
+	u32			max, tmp;
+	unsigned long		flags;
+	u32			csr1, csr2;
+	u32			int_en_reg;
+
+	ep = to_s3c2410_ep(_ep);
+
+	if (!_ep || !desc
+			|| _ep->name == ep0name
+			|| desc->bDescriptorType != USB_DT_ENDPOINT)
+		return -EINVAL;
+
+	dev = ep->dev;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	max = usb_endpoint_maxp(desc);
+
+	local_irq_save(flags);
+	_ep->maxpacket = max;
+	ep->ep.desc = desc;
+	ep->halted = 0;
+	ep->bEndpointAddress = desc->bEndpointAddress;
+
+	/* set max packet */
+	udc_write(ep->num, S3C2410_UDC_INDEX_REG);
+	udc_write(max >> 3, S3C2410_UDC_MAXP_REG);
+
+	/* set type, direction, address; reset fifo counters */
+	if (desc->bEndpointAddress & USB_DIR_IN) {
+		csr1 = S3C2410_UDC_ICSR1_FFLUSH|S3C2410_UDC_ICSR1_CLRDT;
+		csr2 = S3C2410_UDC_ICSR2_MODEIN|S3C2410_UDC_ICSR2_DMAIEN;
+
+		udc_write(ep->num, S3C2410_UDC_INDEX_REG);
+		udc_write(csr1, S3C2410_UDC_IN_CSR1_REG);
+		udc_write(ep->num, S3C2410_UDC_INDEX_REG);
+		udc_write(csr2, S3C2410_UDC_IN_CSR2_REG);
+	} else {
+		/* don't flush in fifo or it will cause endpoint interrupt */
+		csr1 = S3C2410_UDC_ICSR1_CLRDT;
+		csr2 = S3C2410_UDC_ICSR2_DMAIEN;
+
+		udc_write(ep->num, S3C2410_UDC_INDEX_REG);
+		udc_write(csr1, S3C2410_UDC_IN_CSR1_REG);
+		udc_write(ep->num, S3C2410_UDC_INDEX_REG);
+		udc_write(csr2, S3C2410_UDC_IN_CSR2_REG);
+
+		csr1 = S3C2410_UDC_OCSR1_FFLUSH | S3C2410_UDC_OCSR1_CLRDT;
+		csr2 = S3C2410_UDC_OCSR2_DMAIEN;
+
+		udc_write(ep->num, S3C2410_UDC_INDEX_REG);
+		udc_write(csr1, S3C2410_UDC_OUT_CSR1_REG);
+		udc_write(ep->num, S3C2410_UDC_INDEX_REG);
+		udc_write(csr2, S3C2410_UDC_OUT_CSR2_REG);
+	}
+
+	/* enable irqs */
+	int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG);
+	udc_write(int_en_reg | (1 << ep->num), S3C2410_UDC_EP_INT_EN_REG);
+
+	/* print some debug message */
+	tmp = desc->bEndpointAddress;
+	dprintk(DEBUG_NORMAL, "enable %s(%d) ep%x%s-blk max %02x\n",
+		 _ep->name, ep->num, tmp,
+		 desc->bEndpointAddress & USB_DIR_IN ? "in" : "out", max);
+
+	local_irq_restore(flags);
+	s3c2410_udc_set_halt(_ep, 0);
+
+	return 0;
+}
+
+/*
+ * s3c2410_udc_ep_disable
+ */
+static int s3c2410_udc_ep_disable(struct usb_ep *_ep)
+{
+	struct s3c2410_ep *ep = to_s3c2410_ep(_ep);
+	unsigned long flags;
+	u32 int_en_reg;
+
+	if (!_ep || !ep->ep.desc) {
+		dprintk(DEBUG_NORMAL, "%s not enabled\n",
+			_ep ? ep->ep.name : NULL);
+		return -EINVAL;
+	}
+
+	local_irq_save(flags);
+
+	dprintk(DEBUG_NORMAL, "ep_disable: %s\n", _ep->name);
+
+	ep->ep.desc = NULL;
+	ep->halted = 1;
+
+	s3c2410_udc_nuke(ep->dev, ep, -ESHUTDOWN);
+
+	/* disable irqs */
+	int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG);
+	udc_write(int_en_reg & ~(1<<ep->num), S3C2410_UDC_EP_INT_EN_REG);
+
+	local_irq_restore(flags);
+
+	dprintk(DEBUG_NORMAL, "%s disabled\n", _ep->name);
+
+	return 0;
+}
+
+/*
+ * s3c2410_udc_alloc_request
+ */
+static struct usb_request *
+s3c2410_udc_alloc_request(struct usb_ep *_ep, gfp_t mem_flags)
+{
+	struct s3c2410_request *req;
+
+	dprintk(DEBUG_VERBOSE, "%s(%p,%d)\n", __func__, _ep, mem_flags);
+
+	if (!_ep)
+		return NULL;
+
+	req = kzalloc(sizeof(struct s3c2410_request), mem_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+	return &req->req;
+}
+
+/*
+ * s3c2410_udc_free_request
+ */
+static void
+s3c2410_udc_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct s3c2410_ep	*ep = to_s3c2410_ep(_ep);
+	struct s3c2410_request	*req = to_s3c2410_req(_req);
+
+	dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req);
+
+	if (!ep || !_req || (!ep->ep.desc && _ep->name != ep0name))
+		return;
+
+	WARN_ON(!list_empty(&req->queue));
+	kfree(req);
+}
+
+/*
+ *	s3c2410_udc_queue
+ */
+static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req,
+		gfp_t gfp_flags)
+{
+	struct s3c2410_request	*req = to_s3c2410_req(_req);
+	struct s3c2410_ep	*ep = to_s3c2410_ep(_ep);
+	struct s3c2410_udc	*dev;
+	u32			ep_csr = 0;
+	int			fifo_count = 0;
+	unsigned long		flags;
+
+	if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) {
+		dprintk(DEBUG_NORMAL, "%s: invalid args\n", __func__);
+		return -EINVAL;
+	}
+
+	dev = ep->dev;
+	if (unlikely(!dev->driver
+			|| dev->gadget.speed == USB_SPEED_UNKNOWN)) {
+		return -ESHUTDOWN;
+	}
+
+	local_irq_save(flags);
+
+	if (unlikely(!_req || !_req->complete
+			|| !_req->buf || !list_empty(&req->queue))) {
+		if (!_req)
+			dprintk(DEBUG_NORMAL, "%s: 1 X X X\n", __func__);
+		else {
+			dprintk(DEBUG_NORMAL, "%s: 0 %01d %01d %01d\n",
+				__func__, !_req->complete, !_req->buf,
+				!list_empty(&req->queue));
+		}
+
+		local_irq_restore(flags);
+		return -EINVAL;
+	}
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	dprintk(DEBUG_VERBOSE, "%s: ep%x len %d\n",
+		 __func__, ep->bEndpointAddress, _req->length);
+
+	if (ep->bEndpointAddress) {
+		udc_write(ep->bEndpointAddress & 0x7F, S3C2410_UDC_INDEX_REG);
+
+		ep_csr = udc_read((ep->bEndpointAddress & USB_DIR_IN)
+				? S3C2410_UDC_IN_CSR1_REG
+				: S3C2410_UDC_OUT_CSR1_REG);
+		fifo_count = s3c2410_udc_fifo_count_out();
+	} else {
+		udc_write(0, S3C2410_UDC_INDEX_REG);
+		ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG);
+		fifo_count = s3c2410_udc_fifo_count_out();
+	}
+
+	/* kickstart this i/o queue? */
+	if (list_empty(&ep->queue) && !ep->halted) {
+		if (ep->bEndpointAddress == 0 /* ep0 */) {
+			switch (dev->ep0state) {
+			case EP0_IN_DATA_PHASE:
+				if (!(ep_csr&S3C2410_UDC_EP0_CSR_IPKRDY)
+						&& s3c2410_udc_write_fifo(ep,
+							req)) {
+					dev->ep0state = EP0_IDLE;
+					req = NULL;
+				}
+				break;
+
+			case EP0_OUT_DATA_PHASE:
+				if ((!_req->length)
+					|| ((ep_csr & S3C2410_UDC_OCSR1_PKTRDY)
+						&& s3c2410_udc_read_fifo(ep,
+							req))) {
+					dev->ep0state = EP0_IDLE;
+					req = NULL;
+				}
+				break;
+
+			default:
+				local_irq_restore(flags);
+				return -EL2HLT;
+			}
+		} else if ((ep->bEndpointAddress & USB_DIR_IN) != 0
+				&& (!(ep_csr&S3C2410_UDC_OCSR1_PKTRDY))
+				&& s3c2410_udc_write_fifo(ep, req)) {
+			req = NULL;
+		} else if ((ep_csr & S3C2410_UDC_OCSR1_PKTRDY)
+				&& fifo_count
+				&& s3c2410_udc_read_fifo(ep, req)) {
+			req = NULL;
+		}
+	}
+
+	/* pio or dma irq handler advances the queue. */
+	if (likely(req))
+		list_add_tail(&req->queue, &ep->queue);
+
+	local_irq_restore(flags);
+
+	dprintk(DEBUG_VERBOSE, "%s ok\n", __func__);
+	return 0;
+}
+
+/*
+ *	s3c2410_udc_dequeue
+ */
+static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct s3c2410_ep	*ep = to_s3c2410_ep(_ep);
+	int			retval = -EINVAL;
+	unsigned long		flags;
+	struct s3c2410_request	*req = NULL, *iter;
+
+	dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req);
+
+	if (!the_controller->driver)
+		return -ESHUTDOWN;
+
+	if (!_ep || !_req)
+		return retval;
+
+	local_irq_save(flags);
+
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->req != _req)
+			continue;
+		list_del_init(&iter->queue);
+		_req->status = -ECONNRESET;
+		req = iter;
+		retval = 0;
+		break;
+	}
+
+	if (retval == 0) {
+		dprintk(DEBUG_VERBOSE,
+			"dequeued req %p from %s, len %d buf %p\n",
+			req, _ep->name, _req->length, _req->buf);
+
+		s3c2410_udc_done(ep, req, -ECONNRESET);
+	}
+
+	local_irq_restore(flags);
+	return retval;
+}
+
+/*
+ * s3c2410_udc_set_halt
+ */
+static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value)
+{
+	struct s3c2410_ep	*ep = to_s3c2410_ep(_ep);
+	u32			ep_csr = 0;
+	unsigned long		flags;
+	u32			idx;
+
+	if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) {
+		dprintk(DEBUG_NORMAL, "%s: inval 2\n", __func__);
+		return -EINVAL;
+	}
+
+	local_irq_save(flags);
+
+	idx = ep->bEndpointAddress & 0x7F;
+
+	if (idx == 0) {
+		s3c2410_udc_set_ep0_ss(base_addr);
+		s3c2410_udc_set_ep0_de_out(base_addr);
+	} else {
+		udc_write(idx, S3C2410_UDC_INDEX_REG);
+		ep_csr = udc_read((ep->bEndpointAddress & USB_DIR_IN)
+				? S3C2410_UDC_IN_CSR1_REG
+				: S3C2410_UDC_OUT_CSR1_REG);
+
+		if ((ep->bEndpointAddress & USB_DIR_IN) != 0) {
+			if (value)
+				udc_write(ep_csr | S3C2410_UDC_ICSR1_SENDSTL,
+					S3C2410_UDC_IN_CSR1_REG);
+			else {
+				ep_csr &= ~S3C2410_UDC_ICSR1_SENDSTL;
+				udc_write(ep_csr, S3C2410_UDC_IN_CSR1_REG);
+				ep_csr |= S3C2410_UDC_ICSR1_CLRDT;
+				udc_write(ep_csr, S3C2410_UDC_IN_CSR1_REG);
+			}
+		} else {
+			if (value)
+				udc_write(ep_csr | S3C2410_UDC_OCSR1_SENDSTL,
+					S3C2410_UDC_OUT_CSR1_REG);
+			else {
+				ep_csr &= ~S3C2410_UDC_OCSR1_SENDSTL;
+				udc_write(ep_csr, S3C2410_UDC_OUT_CSR1_REG);
+				ep_csr |= S3C2410_UDC_OCSR1_CLRDT;
+				udc_write(ep_csr, S3C2410_UDC_OUT_CSR1_REG);
+			}
+		}
+	}
+
+	ep->halted = value ? 1 : 0;
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static const struct usb_ep_ops s3c2410_ep_ops = {
+	.enable		= s3c2410_udc_ep_enable,
+	.disable	= s3c2410_udc_ep_disable,
+
+	.alloc_request	= s3c2410_udc_alloc_request,
+	.free_request	= s3c2410_udc_free_request,
+
+	.queue		= s3c2410_udc_queue,
+	.dequeue	= s3c2410_udc_dequeue,
+
+	.set_halt	= s3c2410_udc_set_halt,
+};
+
+/*------------------------- usb_gadget_ops ----------------------------------*/
+
+/*
+ *	s3c2410_udc_get_frame
+ */
+static int s3c2410_udc_get_frame(struct usb_gadget *_gadget)
+{
+	int tmp;
+
+	dprintk(DEBUG_VERBOSE, "%s()\n", __func__);
+
+	tmp = udc_read(S3C2410_UDC_FRAME_NUM2_REG) << 8;
+	tmp |= udc_read(S3C2410_UDC_FRAME_NUM1_REG);
+	return tmp;
+}
+
+/*
+ *	s3c2410_udc_wakeup
+ */
+static int s3c2410_udc_wakeup(struct usb_gadget *_gadget)
+{
+	dprintk(DEBUG_NORMAL, "%s()\n", __func__);
+	return 0;
+}
+
+/*
+ *	s3c2410_udc_set_selfpowered
+ */
+static int s3c2410_udc_set_selfpowered(struct usb_gadget *gadget, int value)
+{
+	struct s3c2410_udc *udc = to_s3c2410_udc(gadget);
+
+	dprintk(DEBUG_NORMAL, "%s()\n", __func__);
+
+	gadget->is_selfpowered = (value != 0);
+	if (value)
+		udc->devstatus |= (1 << USB_DEVICE_SELF_POWERED);
+	else
+		udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
+
+	return 0;
+}
+
+static void s3c2410_udc_disable(struct s3c2410_udc *dev);
+static void s3c2410_udc_enable(struct s3c2410_udc *dev);
+
+static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on)
+{
+	dprintk(DEBUG_NORMAL, "%s()\n", __func__);
+
+	if (udc_info && (udc_info->udc_command || udc->pullup_gpiod)) {
+
+		if (is_on)
+			s3c2410_udc_enable(udc);
+		else {
+			if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
+				if (udc->driver && udc->driver->disconnect)
+					udc->driver->disconnect(&udc->gadget);
+
+			}
+			s3c2410_udc_disable(udc);
+		}
+	} else {
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int s3c2410_udc_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct s3c2410_udc *udc = to_s3c2410_udc(gadget);
+
+	dprintk(DEBUG_NORMAL, "%s()\n", __func__);
+
+	udc->vbus = (is_active != 0);
+	s3c2410_udc_set_pullup(udc, is_active);
+	return 0;
+}
+
+static int s3c2410_udc_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct s3c2410_udc *udc = to_s3c2410_udc(gadget);
+
+	dprintk(DEBUG_NORMAL, "%s()\n", __func__);
+
+	s3c2410_udc_set_pullup(udc, is_on);
+	return 0;
+}
+
+static irqreturn_t s3c2410_udc_vbus_irq(int irq, void *_dev)
+{
+	struct s3c2410_udc	*dev = _dev;
+	unsigned int		value;
+
+	dprintk(DEBUG_NORMAL, "%s()\n", __func__);
+
+	value = gpiod_get_value(dev->vbus_gpiod);
+
+	if (value != dev->vbus)
+		s3c2410_udc_vbus_session(&dev->gadget, value);
+
+	return IRQ_HANDLED;
+}
+
+static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
+{
+	dprintk(DEBUG_NORMAL, "%s()\n", __func__);
+
+	if (udc_info && udc_info->vbus_draw) {
+		udc_info->vbus_draw(ma);
+		return 0;
+	}
+
+	return -ENOTSUPP;
+}
+
+static int s3c2410_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+static int s3c2410_udc_stop(struct usb_gadget *g);
+
+static const struct usb_gadget_ops s3c2410_ops = {
+	.get_frame		= s3c2410_udc_get_frame,
+	.wakeup			= s3c2410_udc_wakeup,
+	.set_selfpowered	= s3c2410_udc_set_selfpowered,
+	.pullup			= s3c2410_udc_pullup,
+	.vbus_session		= s3c2410_udc_vbus_session,
+	.vbus_draw		= s3c2410_vbus_draw,
+	.udc_start		= s3c2410_udc_start,
+	.udc_stop		= s3c2410_udc_stop,
+};
+
+static void s3c2410_udc_command(struct s3c2410_udc *udc,
+				enum s3c2410_udc_cmd_e cmd)
+{
+	if (!udc_info)
+		return;
+
+	if (udc_info->udc_command) {
+		udc_info->udc_command(cmd);
+	} else if (udc->pullup_gpiod) {
+		int value;
+
+		switch (cmd) {
+		case S3C2410_UDC_P_ENABLE:
+			value = 1;
+			break;
+		case S3C2410_UDC_P_DISABLE:
+			value = 0;
+			break;
+		default:
+			return;
+		}
+
+		gpiod_set_value(udc->pullup_gpiod, value);
+	}
+}
+
+/*------------------------- gadget driver handling---------------------------*/
+/*
+ * s3c2410_udc_disable
+ */
+static void s3c2410_udc_disable(struct s3c2410_udc *dev)
+{
+	dprintk(DEBUG_NORMAL, "%s()\n", __func__);
+
+	/* Disable all interrupts */
+	udc_write(0x00, S3C2410_UDC_USB_INT_EN_REG);
+	udc_write(0x00, S3C2410_UDC_EP_INT_EN_REG);
+
+	/* Clear the interrupt registers */
+	udc_write(S3C2410_UDC_USBINT_RESET
+				| S3C2410_UDC_USBINT_RESUME
+				| S3C2410_UDC_USBINT_SUSPEND,
+			S3C2410_UDC_USB_INT_REG);
+
+	udc_write(0x1F, S3C2410_UDC_EP_INT_REG);
+
+	/* Good bye, cruel world */
+	s3c2410_udc_command(dev, S3C2410_UDC_P_DISABLE);
+
+	/* Set speed to unknown */
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+}
+
+/*
+ * s3c2410_udc_reinit
+ */
+static void s3c2410_udc_reinit(struct s3c2410_udc *dev)
+{
+	u32 i;
+
+	/* device/ep0 records init */
+	INIT_LIST_HEAD(&dev->gadget.ep_list);
+	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+	dev->ep0state = EP0_IDLE;
+
+	for (i = 0; i < S3C2410_ENDPOINTS; i++) {
+		struct s3c2410_ep *ep = &dev->ep[i];
+
+		if (i != 0)
+			list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
+
+		ep->dev = dev;
+		ep->ep.desc = NULL;
+		ep->halted = 0;
+		INIT_LIST_HEAD(&ep->queue);
+		usb_ep_set_maxpacket_limit(&ep->ep, ep->ep.maxpacket);
+	}
+}
+
+/*
+ * s3c2410_udc_enable
+ */
+static void s3c2410_udc_enable(struct s3c2410_udc *dev)
+{
+	int i;
+
+	dprintk(DEBUG_NORMAL, "s3c2410_udc_enable called\n");
+
+	/* dev->gadget.speed = USB_SPEED_UNKNOWN; */
+	dev->gadget.speed = USB_SPEED_FULL;
+
+	/* Set MAXP for all endpoints */
+	for (i = 0; i < S3C2410_ENDPOINTS; i++) {
+		udc_write(i, S3C2410_UDC_INDEX_REG);
+		udc_write((dev->ep[i].ep.maxpacket & 0x7ff) >> 3,
+				S3C2410_UDC_MAXP_REG);
+	}
+
+	/* Set default power state */
+	udc_write(DEFAULT_POWER_STATE, S3C2410_UDC_PWR_REG);
+
+	/* Enable reset and suspend interrupt interrupts */
+	udc_write(S3C2410_UDC_USBINT_RESET | S3C2410_UDC_USBINT_SUSPEND,
+			S3C2410_UDC_USB_INT_EN_REG);
+
+	/* Enable ep0 interrupt */
+	udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_EN_REG);
+
+	/* time to say "hello, world" */
+	s3c2410_udc_command(dev, S3C2410_UDC_P_ENABLE);
+}
+
+static int s3c2410_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct s3c2410_udc *udc = to_s3c2410(g);
+
+	dprintk(DEBUG_NORMAL, "%s() '%s'\n", __func__, driver->driver.name);
+
+	/* Hook the driver */
+	udc->driver = driver;
+
+	/* Enable udc */
+	s3c2410_udc_enable(udc);
+
+	return 0;
+}
+
+static int s3c2410_udc_stop(struct usb_gadget *g)
+{
+	struct s3c2410_udc *udc = to_s3c2410(g);
+
+	udc->driver = NULL;
+
+	/* Disable udc */
+	s3c2410_udc_disable(udc);
+
+	return 0;
+}
+
+/*---------------------------------------------------------------------------*/
+static struct s3c2410_udc memory = {
+	.gadget = {
+		.ops		= &s3c2410_ops,
+		.ep0		= &memory.ep[0].ep,
+		.name		= gadget_name,
+		.dev = {
+			.init_name	= "gadget",
+		},
+	},
+
+	/* control endpoint */
+	.ep[0] = {
+		.num		= 0,
+		.ep = {
+			.name		= ep0name,
+			.ops		= &s3c2410_ep_ops,
+			.maxpacket	= EP0_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL,
+						USB_EP_CAPS_DIR_ALL),
+		},
+		.dev		= &memory,
+	},
+
+	/* first group of endpoints */
+	.ep[1] = {
+		.num		= 1,
+		.ep = {
+			.name		= "ep1-bulk",
+			.ops		= &s3c2410_ep_ops,
+			.maxpacket	= EP_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_ALL),
+		},
+		.dev		= &memory,
+		.fifo_size	= EP_FIFO_SIZE,
+		.bEndpointAddress = 1,
+		.bmAttributes	= USB_ENDPOINT_XFER_BULK,
+	},
+	.ep[2] = {
+		.num		= 2,
+		.ep = {
+			.name		= "ep2-bulk",
+			.ops		= &s3c2410_ep_ops,
+			.maxpacket	= EP_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_ALL),
+		},
+		.dev		= &memory,
+		.fifo_size	= EP_FIFO_SIZE,
+		.bEndpointAddress = 2,
+		.bmAttributes	= USB_ENDPOINT_XFER_BULK,
+	},
+	.ep[3] = {
+		.num		= 3,
+		.ep = {
+			.name		= "ep3-bulk",
+			.ops		= &s3c2410_ep_ops,
+			.maxpacket	= EP_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_ALL),
+		},
+		.dev		= &memory,
+		.fifo_size	= EP_FIFO_SIZE,
+		.bEndpointAddress = 3,
+		.bmAttributes	= USB_ENDPOINT_XFER_BULK,
+	},
+	.ep[4] = {
+		.num		= 4,
+		.ep = {
+			.name		= "ep4-bulk",
+			.ops		= &s3c2410_ep_ops,
+			.maxpacket	= EP_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_ALL),
+		},
+		.dev		= &memory,
+		.fifo_size	= EP_FIFO_SIZE,
+		.bEndpointAddress = 4,
+		.bmAttributes	= USB_ENDPOINT_XFER_BULK,
+	}
+
+};
+
+/*
+ *	probe - binds to the platform device
+ */
+static int s3c2410_udc_probe(struct platform_device *pdev)
+{
+	struct s3c2410_udc *udc = &memory;
+	struct device *dev = &pdev->dev;
+	int retval;
+	int irq;
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	usb_bus_clock = clk_get(NULL, "usb-bus-gadget");
+	if (IS_ERR(usb_bus_clock)) {
+		dev_err(dev, "failed to get usb bus clock source\n");
+		return PTR_ERR(usb_bus_clock);
+	}
+
+	clk_prepare_enable(usb_bus_clock);
+
+	udc_clock = clk_get(NULL, "usb-device");
+	if (IS_ERR(udc_clock)) {
+		dev_err(dev, "failed to get udc clock source\n");
+		retval = PTR_ERR(udc_clock);
+		goto err_usb_bus_clk;
+	}
+
+	clk_prepare_enable(udc_clock);
+
+	mdelay(10);
+
+	dev_dbg(dev, "got and enabled clocks\n");
+
+	if (strncmp(pdev->name, "s3c2440", 7) == 0) {
+		dev_info(dev, "S3C2440: increasing FIFO to 128 bytes\n");
+		memory.ep[1].fifo_size = S3C2440_EP_FIFO_SIZE;
+		memory.ep[2].fifo_size = S3C2440_EP_FIFO_SIZE;
+		memory.ep[3].fifo_size = S3C2440_EP_FIFO_SIZE;
+		memory.ep[4].fifo_size = S3C2440_EP_FIFO_SIZE;
+	}
+
+	spin_lock_init(&udc->lock);
+	udc_info = dev_get_platdata(&pdev->dev);
+
+	base_addr = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base_addr)) {
+		retval = PTR_ERR(base_addr);
+		goto err_udc_clk;
+	}
+
+	the_controller = udc;
+	platform_set_drvdata(pdev, udc);
+
+	s3c2410_udc_disable(udc);
+	s3c2410_udc_reinit(udc);
+
+	irq_usbd = platform_get_irq(pdev, 0);
+	if (irq_usbd < 0) {
+		retval = irq_usbd;
+		goto err_udc_clk;
+	}
+
+	/* irq setup after old hardware state is cleaned up */
+	retval = request_irq(irq_usbd, s3c2410_udc_irq,
+			     0, gadget_name, udc);
+
+	if (retval != 0) {
+		dev_err(dev, "cannot get irq %i, err %d\n", irq_usbd, retval);
+		retval = -EBUSY;
+		goto err_udc_clk;
+	}
+
+	dev_dbg(dev, "got irq %i\n", irq_usbd);
+
+	udc->vbus_gpiod = gpiod_get_optional(dev, "vbus", GPIOD_IN);
+	if (IS_ERR(udc->vbus_gpiod)) {
+		retval = PTR_ERR(udc->vbus_gpiod);
+		goto err_int;
+	}
+	if (udc->vbus_gpiod) {
+		gpiod_set_consumer_name(udc->vbus_gpiod, "udc vbus");
+
+		irq = gpiod_to_irq(udc->vbus_gpiod);
+		if (irq < 0) {
+			dev_err(dev, "no irq for gpio vbus pin\n");
+			retval = irq;
+			goto err_gpio_claim;
+		}
+
+		retval = request_irq(irq, s3c2410_udc_vbus_irq,
+				     IRQF_TRIGGER_RISING
+				     | IRQF_TRIGGER_FALLING | IRQF_SHARED,
+				     gadget_name, udc);
+
+		if (retval != 0) {
+			dev_err(dev, "can't get vbus irq %d, err %d\n",
+				irq, retval);
+			retval = -EBUSY;
+			goto err_gpio_claim;
+		}
+
+		dev_dbg(dev, "got irq %i\n", irq);
+	} else {
+		udc->vbus = 1;
+	}
+
+	udc->pullup_gpiod = gpiod_get_optional(dev, "pullup", GPIOD_OUT_LOW);
+	if (IS_ERR(udc->pullup_gpiod)) {
+		retval = PTR_ERR(udc->pullup_gpiod);
+		goto err_vbus_irq;
+	}
+	gpiod_set_consumer_name(udc->pullup_gpiod, "udc pullup");
+
+	retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
+	if (retval)
+		goto err_add_udc;
+
+	debugfs_create_file("registers", S_IRUGO, s3c2410_udc_debugfs_root, udc,
+			    &s3c2410_udc_debugfs_fops);
+
+	dev_dbg(dev, "probe ok\n");
+
+	return 0;
+
+err_add_udc:
+err_vbus_irq:
+	if (udc->vbus_gpiod)
+		free_irq(gpiod_to_irq(udc->vbus_gpiod), udc);
+err_gpio_claim:
+err_int:
+	free_irq(irq_usbd, udc);
+err_udc_clk:
+	clk_disable_unprepare(udc_clock);
+	clk_put(udc_clock);
+	udc_clock = NULL;
+err_usb_bus_clk:
+	clk_disable_unprepare(usb_bus_clock);
+	clk_put(usb_bus_clock);
+	usb_bus_clock = NULL;
+
+	return retval;
+}
+
+/*
+ *	s3c2410_udc_remove
+ */
+static int s3c2410_udc_remove(struct platform_device *pdev)
+{
+	struct s3c2410_udc *udc = platform_get_drvdata(pdev);
+
+	dev_dbg(&pdev->dev, "%s()\n", __func__);
+
+	if (udc->driver)
+		return -EBUSY;
+
+	usb_del_gadget_udc(&udc->gadget);
+	debugfs_remove(debugfs_lookup("registers", s3c2410_udc_debugfs_root));
+
+	if (udc->vbus_gpiod)
+		free_irq(gpiod_to_irq(udc->vbus_gpiod), udc);
+
+	free_irq(irq_usbd, udc);
+
+	if (!IS_ERR(udc_clock) && udc_clock != NULL) {
+		clk_disable_unprepare(udc_clock);
+		clk_put(udc_clock);
+		udc_clock = NULL;
+	}
+
+	if (!IS_ERR(usb_bus_clock) && usb_bus_clock != NULL) {
+		clk_disable_unprepare(usb_bus_clock);
+		clk_put(usb_bus_clock);
+		usb_bus_clock = NULL;
+	}
+
+	dev_dbg(&pdev->dev, "%s: remove ok\n", __func__);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int
+s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message)
+{
+	struct s3c2410_udc *udc = platform_get_drvdata(pdev);
+
+	s3c2410_udc_command(udc, S3C2410_UDC_P_DISABLE);
+
+	return 0;
+}
+
+static int s3c2410_udc_resume(struct platform_device *pdev)
+{
+	struct s3c2410_udc *udc = platform_get_drvdata(pdev);
+
+	s3c2410_udc_command(udc, S3C2410_UDC_P_ENABLE);
+
+	return 0;
+}
+#else
+#define s3c2410_udc_suspend	NULL
+#define s3c2410_udc_resume	NULL
+#endif
+
+static const struct platform_device_id s3c_udc_ids[] = {
+	{ "s3c2410-usbgadget", },
+	{ "s3c2440-usbgadget", },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, s3c_udc_ids);
+
+static struct platform_driver udc_driver_24x0 = {
+	.driver		= {
+		.name	= "s3c24x0-usbgadget",
+	},
+	.probe		= s3c2410_udc_probe,
+	.remove		= s3c2410_udc_remove,
+	.suspend	= s3c2410_udc_suspend,
+	.resume		= s3c2410_udc_resume,
+	.id_table	= s3c_udc_ids,
+};
+
+static int __init udc_init(void)
+{
+	int retval;
+
+	dprintk(DEBUG_NORMAL, "%s\n", gadget_name);
+
+	s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name,
+						      usb_debug_root);
+
+	retval = platform_driver_register(&udc_driver_24x0);
+	if (retval)
+		goto err;
+
+	return 0;
+
+err:
+	debugfs_remove(s3c2410_udc_debugfs_root);
+	return retval;
+}
+
+static void __exit udc_exit(void)
+{
+	platform_driver_unregister(&udc_driver_24x0);
+	debugfs_remove_recursive(s3c2410_udc_debugfs_root);
+}
+
+module_init(udc_init);
+module_exit(udc_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h
new file mode 100644
index 000000000..cdbf202e5
--- /dev/null
+++ b/drivers/usb/gadget/udc/s3c2410_udc.h
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * linux/drivers/usb/gadget/s3c2410_udc.h
+ * Samsung on-chip full speed USB device controllers
+ *
+ * Copyright (C) 2004-2007 Herbert Pötzl - Arnaud Patard
+ *	Additional cleanups by Ben Dooks <ben-linux@fluff.org>
+ */
+
+#ifndef _S3C2410_UDC_H
+#define _S3C2410_UDC_H
+
+struct s3c2410_ep {
+	struct list_head		queue;
+	unsigned long			last_io;	/* jiffies timestamp */
+	struct usb_gadget		*gadget;
+	struct s3c2410_udc		*dev;
+	struct usb_ep			ep;
+	u8				num;
+
+	unsigned short			fifo_size;
+	u8				bEndpointAddress;
+	u8				bmAttributes;
+
+	unsigned			halted : 1;
+	unsigned			already_seen : 1;
+	unsigned			setup_stage : 1;
+};
+
+
+/* Warning : ep0 has a fifo of 16 bytes */
+/* Don't try to set 32 or 64            */
+/* also testusb 14 fails  wit 16 but is */
+/* fine with 8                          */
+#define EP0_FIFO_SIZE		 8
+#define EP_FIFO_SIZE		64
+#define DEFAULT_POWER_STATE	0x00
+
+#define S3C2440_EP_FIFO_SIZE	128
+
+static const char ep0name [] = "ep0";
+
+static const char *const ep_name[] = {
+	ep0name,                                /* everyone has ep0 */
+	/* s3c2410 four bidirectional bulk endpoints */
+	"ep1-bulk", "ep2-bulk", "ep3-bulk", "ep4-bulk",
+};
+
+#define S3C2410_ENDPOINTS       ARRAY_SIZE(ep_name)
+
+struct s3c2410_request {
+	struct list_head		queue;		/* ep's requests */
+	struct usb_request		req;
+};
+
+enum ep0_state {
+        EP0_IDLE,
+        EP0_IN_DATA_PHASE,
+        EP0_OUT_DATA_PHASE,
+        EP0_END_XFER,
+        EP0_STALL,
+};
+
+static const char *ep0states[]= {
+        "EP0_IDLE",
+        "EP0_IN_DATA_PHASE",
+        "EP0_OUT_DATA_PHASE",
+        "EP0_END_XFER",
+        "EP0_STALL",
+};
+
+struct s3c2410_udc {
+	spinlock_t			lock;
+
+	struct s3c2410_ep		ep[S3C2410_ENDPOINTS];
+	int				address;
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	struct s3c2410_request		fifo_req;
+	u8				fifo_buf[EP_FIFO_SIZE];
+	u16				devstatus;
+
+	u32				port_status;
+	int				ep0state;
+
+	struct gpio_desc		*vbus_gpiod;
+	struct gpio_desc		*pullup_gpiod;
+
+	unsigned			got_irq : 1;
+
+	unsigned			req_std : 1;
+	unsigned			req_config : 1;
+	unsigned			req_pending : 1;
+	u8				vbus;
+	int				irq;
+};
+#define to_s3c2410(g)	(container_of((g), struct s3c2410_udc, gadget))
+
+#endif
diff --git a/drivers/usb/gadget/udc/s3c2410_udc_regs.h b/drivers/usb/gadget/udc/s3c2410_udc_regs.h
new file mode 100644
index 000000000..d8d2eeaca
--- /dev/null
+++ b/drivers/usb/gadget/udc/s3c2410_udc_regs.h
@@ -0,0 +1,146 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
+ */
+
+#ifndef __ASM_ARCH_REGS_UDC_H
+#define __ASM_ARCH_REGS_UDC_H
+
+#define S3C2410_USBDREG(x) (x)
+
+#define S3C2410_UDC_FUNC_ADDR_REG	S3C2410_USBDREG(0x0140)
+#define S3C2410_UDC_PWR_REG		S3C2410_USBDREG(0x0144)
+#define S3C2410_UDC_EP_INT_REG		S3C2410_USBDREG(0x0148)
+
+#define S3C2410_UDC_USB_INT_REG		S3C2410_USBDREG(0x0158)
+#define S3C2410_UDC_EP_INT_EN_REG	S3C2410_USBDREG(0x015c)
+
+#define S3C2410_UDC_USB_INT_EN_REG	S3C2410_USBDREG(0x016c)
+
+#define S3C2410_UDC_FRAME_NUM1_REG	S3C2410_USBDREG(0x0170)
+#define S3C2410_UDC_FRAME_NUM2_REG	S3C2410_USBDREG(0x0174)
+
+#define S3C2410_UDC_EP0_FIFO_REG	S3C2410_USBDREG(0x01c0)
+#define S3C2410_UDC_EP1_FIFO_REG	S3C2410_USBDREG(0x01c4)
+#define S3C2410_UDC_EP2_FIFO_REG	S3C2410_USBDREG(0x01c8)
+#define S3C2410_UDC_EP3_FIFO_REG	S3C2410_USBDREG(0x01cc)
+#define S3C2410_UDC_EP4_FIFO_REG	S3C2410_USBDREG(0x01d0)
+
+#define S3C2410_UDC_EP1_DMA_CON		S3C2410_USBDREG(0x0200)
+#define S3C2410_UDC_EP1_DMA_UNIT	S3C2410_USBDREG(0x0204)
+#define S3C2410_UDC_EP1_DMA_FIFO	S3C2410_USBDREG(0x0208)
+#define S3C2410_UDC_EP1_DMA_TTC_L	S3C2410_USBDREG(0x020c)
+#define S3C2410_UDC_EP1_DMA_TTC_M	S3C2410_USBDREG(0x0210)
+#define S3C2410_UDC_EP1_DMA_TTC_H	S3C2410_USBDREG(0x0214)
+
+#define S3C2410_UDC_EP2_DMA_CON		S3C2410_USBDREG(0x0218)
+#define S3C2410_UDC_EP2_DMA_UNIT	S3C2410_USBDREG(0x021c)
+#define S3C2410_UDC_EP2_DMA_FIFO	S3C2410_USBDREG(0x0220)
+#define S3C2410_UDC_EP2_DMA_TTC_L	S3C2410_USBDREG(0x0224)
+#define S3C2410_UDC_EP2_DMA_TTC_M	S3C2410_USBDREG(0x0228)
+#define S3C2410_UDC_EP2_DMA_TTC_H	S3C2410_USBDREG(0x022c)
+
+#define S3C2410_UDC_EP3_DMA_CON		S3C2410_USBDREG(0x0240)
+#define S3C2410_UDC_EP3_DMA_UNIT	S3C2410_USBDREG(0x0244)
+#define S3C2410_UDC_EP3_DMA_FIFO	S3C2410_USBDREG(0x0248)
+#define S3C2410_UDC_EP3_DMA_TTC_L	S3C2410_USBDREG(0x024c)
+#define S3C2410_UDC_EP3_DMA_TTC_M	S3C2410_USBDREG(0x0250)
+#define S3C2410_UDC_EP3_DMA_TTC_H	S3C2410_USBDREG(0x0254)
+
+#define S3C2410_UDC_EP4_DMA_CON		S3C2410_USBDREG(0x0258)
+#define S3C2410_UDC_EP4_DMA_UNIT	S3C2410_USBDREG(0x025c)
+#define S3C2410_UDC_EP4_DMA_FIFO	S3C2410_USBDREG(0x0260)
+#define S3C2410_UDC_EP4_DMA_TTC_L	S3C2410_USBDREG(0x0264)
+#define S3C2410_UDC_EP4_DMA_TTC_M	S3C2410_USBDREG(0x0268)
+#define S3C2410_UDC_EP4_DMA_TTC_H	S3C2410_USBDREG(0x026c)
+
+#define S3C2410_UDC_INDEX_REG		S3C2410_USBDREG(0x0178)
+
+/* indexed registers */
+
+#define S3C2410_UDC_MAXP_REG		S3C2410_USBDREG(0x0180)
+
+#define S3C2410_UDC_EP0_CSR_REG		S3C2410_USBDREG(0x0184)
+
+#define S3C2410_UDC_IN_CSR1_REG		S3C2410_USBDREG(0x0184)
+#define S3C2410_UDC_IN_CSR2_REG		S3C2410_USBDREG(0x0188)
+
+#define S3C2410_UDC_OUT_CSR1_REG	S3C2410_USBDREG(0x0190)
+#define S3C2410_UDC_OUT_CSR2_REG	S3C2410_USBDREG(0x0194)
+#define S3C2410_UDC_OUT_FIFO_CNT1_REG	S3C2410_USBDREG(0x0198)
+#define S3C2410_UDC_OUT_FIFO_CNT2_REG	S3C2410_USBDREG(0x019c)
+
+#define S3C2410_UDC_FUNCADDR_UPDATE	(1 << 7)
+
+#define S3C2410_UDC_PWR_ISOUP		(1 << 7) /* R/W */
+#define S3C2410_UDC_PWR_RESET		(1 << 3) /* R   */
+#define S3C2410_UDC_PWR_RESUME		(1 << 2) /* R/W */
+#define S3C2410_UDC_PWR_SUSPEND		(1 << 1) /* R   */
+#define S3C2410_UDC_PWR_ENSUSPEND	(1 << 0) /* R/W */
+
+#define S3C2410_UDC_PWR_DEFAULT		(0x00)
+
+#define S3C2410_UDC_INT_EP4		(1 << 4) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP3		(1 << 3) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP2		(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP1		(1 << 1) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP0		(1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_USBINT_RESET	(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_USBINT_RESUME	(1 << 1) /* R/W (clear only) */
+#define S3C2410_UDC_USBINT_SUSPEND	(1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_INTE_EP4		(1 << 4) /* R/W */
+#define S3C2410_UDC_INTE_EP3		(1 << 3) /* R/W */
+#define S3C2410_UDC_INTE_EP2		(1 << 2) /* R/W */
+#define S3C2410_UDC_INTE_EP1		(1 << 1) /* R/W */
+#define S3C2410_UDC_INTE_EP0		(1 << 0) /* R/W */
+
+#define S3C2410_UDC_USBINTE_RESET	(1 << 2) /* R/W */
+#define S3C2410_UDC_USBINTE_SUSPEND	(1 << 0) /* R/W */
+
+#define S3C2410_UDC_INDEX_EP0		(0x00)
+#define S3C2410_UDC_INDEX_EP1		(0x01)
+#define S3C2410_UDC_INDEX_EP2		(0x02)
+#define S3C2410_UDC_INDEX_EP3		(0x03)
+#define S3C2410_UDC_INDEX_EP4		(0x04)
+
+#define S3C2410_UDC_ICSR1_CLRDT		(1 << 6) /* R/W */
+#define S3C2410_UDC_ICSR1_SENTSTL	(1 << 5) /* R/W (clear only) */
+#define S3C2410_UDC_ICSR1_SENDSTL	(1 << 4) /* R/W */
+#define S3C2410_UDC_ICSR1_FFLUSH	(1 << 3) /* W   (set only) */
+#define S3C2410_UDC_ICSR1_UNDRUN	(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_ICSR1_PKTRDY	(1 << 0) /* R/W (set only) */
+
+#define S3C2410_UDC_ICSR2_AUTOSET	(1 << 7) /* R/W */
+#define S3C2410_UDC_ICSR2_ISO		(1 << 6) /* R/W */
+#define S3C2410_UDC_ICSR2_MODEIN	(1 << 5) /* R/W */
+#define S3C2410_UDC_ICSR2_DMAIEN	(1 << 4) /* R/W */
+
+#define S3C2410_UDC_OCSR1_CLRDT		(1 << 7) /* R/W */
+#define S3C2410_UDC_OCSR1_SENTSTL	(1 << 6) /* R/W (clear only) */
+#define S3C2410_UDC_OCSR1_SENDSTL	(1 << 5) /* R/W */
+#define S3C2410_UDC_OCSR1_FFLUSH	(1 << 4) /* R/W */
+#define S3C2410_UDC_OCSR1_DERROR	(1 << 3) /* R   */
+#define S3C2410_UDC_OCSR1_OVRRUN	(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_OCSR1_PKTRDY	(1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_OCSR2_AUTOCLR	(1 << 7) /* R/W */
+#define S3C2410_UDC_OCSR2_ISO		(1 << 6) /* R/W */
+#define S3C2410_UDC_OCSR2_DMAIEN	(1 << 5) /* R/W */
+
+#define S3C2410_UDC_EP0_CSR_OPKRDY	(1 << 0)
+#define S3C2410_UDC_EP0_CSR_IPKRDY	(1 << 1)
+#define S3C2410_UDC_EP0_CSR_SENTSTL	(1 << 2)
+#define S3C2410_UDC_EP0_CSR_DE		(1 << 3)
+#define S3C2410_UDC_EP0_CSR_SE		(1 << 4)
+#define S3C2410_UDC_EP0_CSR_SENDSTL	(1 << 5)
+#define S3C2410_UDC_EP0_CSR_SOPKTRDY	(1 << 6)
+#define S3C2410_UDC_EP0_CSR_SSE		(1 << 7)
+
+#define S3C2410_UDC_MAXP_8		(1 << 0)
+#define S3C2410_UDC_MAXP_16		(1 << 1)
+#define S3C2410_UDC_MAXP_32		(1 << 2)
+#define S3C2410_UDC_MAXP_64		(1 << 3)
+
+#endif
diff --git a/drivers/usb/gadget/udc/snps_udc_core.c b/drivers/usb/gadget/udc/snps_udc_core.c
new file mode 100644
index 000000000..2fc5d4d27
--- /dev/null
+++ b/drivers/usb/gadget/udc/snps_udc_core.c
@@ -0,0 +1,3192 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * amd5536.c -- AMD 5536 UDC high/full speed USB device controller
+ *
+ * Copyright (C) 2005-2007 AMD (https://www.amd.com)
+ * Author: Thomas Dahlmann
+ */
+
+/*
+ * This file does the core driver implementation for the UDC that is based
+ * on Synopsys device controller IP (different than HS OTG IP) that is either
+ * connected through PCI bus or integrated to SoC platforms.
+ */
+
+/* Driver strings */
+#define UDC_MOD_DESCRIPTION		"Synopsys USB Device Controller"
+#define UDC_DRIVER_VERSION_STRING	"01.00.0206"
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/ioctl.h>
+#include <linux/fs.h>
+#include <linux/dmapool.h>
+#include <linux/prefetch.h>
+#include <linux/moduleparam.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+#include "amd5536udc.h"
+
+static void udc_setup_endpoints(struct udc *dev);
+static void udc_soft_reset(struct udc *dev);
+static struct udc_request *udc_alloc_bna_dummy(struct udc_ep *ep);
+static void udc_free_request(struct usb_ep *usbep, struct usb_request *usbreq);
+
+/* description */
+static const char mod_desc[] = UDC_MOD_DESCRIPTION;
+static const char name[] = "udc";
+
+/* structure to hold endpoint function pointers */
+static const struct usb_ep_ops udc_ep_ops;
+
+/* received setup data */
+static union udc_setup_data setup_data;
+
+/* pointer to device object */
+static struct udc *udc;
+
+/* irq spin lock for soft reset */
+static DEFINE_SPINLOCK(udc_irq_spinlock);
+/* stall spin lock */
+static DEFINE_SPINLOCK(udc_stall_spinlock);
+
+/*
+* slave mode: pending bytes in rx fifo after nyet,
+* used if EPIN irq came but no req was available
+*/
+static unsigned int udc_rxfifo_pending;
+
+/* count soft resets after suspend to avoid loop */
+static int soft_reset_occured;
+static int soft_reset_after_usbreset_occured;
+
+/* timer */
+static struct timer_list udc_timer;
+static int stop_timer;
+
+/* set_rde -- Is used to control enabling of RX DMA. Problem is
+ * that UDC has only one bit (RDE) to enable/disable RX DMA for
+ * all OUT endpoints. So we have to handle race conditions like
+ * when OUT data reaches the fifo but no request was queued yet.
+ * This cannot be solved by letting the RX DMA disabled until a
+ * request gets queued because there may be other OUT packets
+ * in the FIFO (important for not blocking control traffic).
+ * The value of set_rde controls the corresponding timer.
+ *
+ * set_rde -1 == not used, means it is alloed to be set to 0 or 1
+ * set_rde  0 == do not touch RDE, do no start the RDE timer
+ * set_rde  1 == timer function will look whether FIFO has data
+ * set_rde  2 == set by timer function to enable RX DMA on next call
+ */
+static int set_rde = -1;
+
+static DECLARE_COMPLETION(on_exit);
+static struct timer_list udc_pollstall_timer;
+static int stop_pollstall_timer;
+static DECLARE_COMPLETION(on_pollstall_exit);
+
+/* endpoint names used for print */
+static const char ep0_string[] = "ep0in";
+static const struct {
+	const char *name;
+	const struct usb_ep_caps caps;
+} ep_info[] = {
+#define EP_INFO(_name, _caps) \
+	{ \
+		.name = _name, \
+		.caps = _caps, \
+	}
+
+	EP_INFO(ep0_string,
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep1in-int",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep2in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep3in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep4in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep5in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep6in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep7in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep8in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep9in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep10in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep11in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep12in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep13in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep14in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep15in-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+	EP_INFO("ep0out",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep1out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep2out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep3out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep4out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep5out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep6out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep7out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep8out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep9out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep10out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep11out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep12out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep13out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep14out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+	EP_INFO("ep15out-bulk",
+		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+
+#undef EP_INFO
+};
+
+/* buffer fill mode */
+static int use_dma_bufferfill_mode;
+/* tx buffer size for high speed */
+static unsigned long hs_tx_buf = UDC_EPIN_BUFF_SIZE;
+
+/*---------------------------------------------------------------------------*/
+/* Prints UDC device registers and endpoint irq registers */
+static void print_regs(struct udc *dev)
+{
+	DBG(dev, "------- Device registers -------\n");
+	DBG(dev, "dev config     = %08x\n", readl(&dev->regs->cfg));
+	DBG(dev, "dev control    = %08x\n", readl(&dev->regs->ctl));
+	DBG(dev, "dev status     = %08x\n", readl(&dev->regs->sts));
+	DBG(dev, "\n");
+	DBG(dev, "dev int's      = %08x\n", readl(&dev->regs->irqsts));
+	DBG(dev, "dev intmask    = %08x\n", readl(&dev->regs->irqmsk));
+	DBG(dev, "\n");
+	DBG(dev, "dev ep int's   = %08x\n", readl(&dev->regs->ep_irqsts));
+	DBG(dev, "dev ep intmask = %08x\n", readl(&dev->regs->ep_irqmsk));
+	DBG(dev, "\n");
+	DBG(dev, "USE DMA        = %d\n", use_dma);
+	if (use_dma && use_dma_ppb && !use_dma_ppb_du) {
+		DBG(dev, "DMA mode       = PPBNDU (packet per buffer "
+			"WITHOUT desc. update)\n");
+		dev_info(dev->dev, "DMA mode (%s)\n", "PPBNDU");
+	} else if (use_dma && use_dma_ppb && use_dma_ppb_du) {
+		DBG(dev, "DMA mode       = PPBDU (packet per buffer "
+			"WITH desc. update)\n");
+		dev_info(dev->dev, "DMA mode (%s)\n", "PPBDU");
+	}
+	if (use_dma && use_dma_bufferfill_mode) {
+		DBG(dev, "DMA mode       = BF (buffer fill mode)\n");
+		dev_info(dev->dev, "DMA mode (%s)\n", "BF");
+	}
+	if (!use_dma)
+		dev_info(dev->dev, "FIFO mode\n");
+	DBG(dev, "-------------------------------------------------------\n");
+}
+
+/* Masks unused interrupts */
+int udc_mask_unused_interrupts(struct udc *dev)
+{
+	u32 tmp;
+
+	/* mask all dev interrupts */
+	tmp =	AMD_BIT(UDC_DEVINT_SVC) |
+		AMD_BIT(UDC_DEVINT_ENUM) |
+		AMD_BIT(UDC_DEVINT_US) |
+		AMD_BIT(UDC_DEVINT_UR) |
+		AMD_BIT(UDC_DEVINT_ES) |
+		AMD_BIT(UDC_DEVINT_SI) |
+		AMD_BIT(UDC_DEVINT_SOF)|
+		AMD_BIT(UDC_DEVINT_SC);
+	writel(tmp, &dev->regs->irqmsk);
+
+	/* mask all ep interrupts */
+	writel(UDC_EPINT_MSK_DISABLE_ALL, &dev->regs->ep_irqmsk);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(udc_mask_unused_interrupts);
+
+/* Enables endpoint 0 interrupts */
+static int udc_enable_ep0_interrupts(struct udc *dev)
+{
+	u32 tmp;
+
+	DBG(dev, "udc_enable_ep0_interrupts()\n");
+
+	/* read irq mask */
+	tmp = readl(&dev->regs->ep_irqmsk);
+	/* enable ep0 irq's */
+	tmp &= AMD_UNMASK_BIT(UDC_EPINT_IN_EP0)
+		& AMD_UNMASK_BIT(UDC_EPINT_OUT_EP0);
+	writel(tmp, &dev->regs->ep_irqmsk);
+
+	return 0;
+}
+
+/* Enables device interrupts for SET_INTF and SET_CONFIG */
+int udc_enable_dev_setup_interrupts(struct udc *dev)
+{
+	u32 tmp;
+
+	DBG(dev, "enable device interrupts for setup data\n");
+
+	/* read irq mask */
+	tmp = readl(&dev->regs->irqmsk);
+
+	/* enable SET_INTERFACE, SET_CONFIG and other needed irq's */
+	tmp &= AMD_UNMASK_BIT(UDC_DEVINT_SI)
+		& AMD_UNMASK_BIT(UDC_DEVINT_SC)
+		& AMD_UNMASK_BIT(UDC_DEVINT_UR)
+		& AMD_UNMASK_BIT(UDC_DEVINT_SVC)
+		& AMD_UNMASK_BIT(UDC_DEVINT_ENUM);
+	writel(tmp, &dev->regs->irqmsk);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(udc_enable_dev_setup_interrupts);
+
+/* Calculates fifo start of endpoint based on preceding endpoints */
+static int udc_set_txfifo_addr(struct udc_ep *ep)
+{
+	struct udc	*dev;
+	u32 tmp;
+	int i;
+
+	if (!ep || !(ep->in))
+		return -EINVAL;
+
+	dev = ep->dev;
+	ep->txfifo = dev->txfifo;
+
+	/* traverse ep's */
+	for (i = 0; i < ep->num; i++) {
+		if (dev->ep[i].regs) {
+			/* read fifo size */
+			tmp = readl(&dev->ep[i].regs->bufin_framenum);
+			tmp = AMD_GETBITS(tmp, UDC_EPIN_BUFF_SIZE);
+			ep->txfifo += tmp;
+		}
+	}
+	return 0;
+}
+
+/* CNAK pending field: bit0 = ep0in, bit16 = ep0out */
+static u32 cnak_pending;
+
+static void UDC_QUEUE_CNAK(struct udc_ep *ep, unsigned num)
+{
+	if (readl(&ep->regs->ctl) & AMD_BIT(UDC_EPCTL_NAK)) {
+		DBG(ep->dev, "NAK could not be cleared for ep%d\n", num);
+		cnak_pending |= 1 << (num);
+		ep->naking = 1;
+	} else
+		cnak_pending = cnak_pending & (~(1 << (num)));
+}
+
+
+/* Enables endpoint, is called by gadget driver */
+static int
+udc_ep_enable(struct usb_ep *usbep, const struct usb_endpoint_descriptor *desc)
+{
+	struct udc_ep		*ep;
+	struct udc		*dev;
+	u32			tmp;
+	unsigned long		iflags;
+	u8 udc_csr_epix;
+	unsigned		maxpacket;
+
+	if (!usbep
+			|| usbep->name == ep0_string
+			|| !desc
+			|| desc->bDescriptorType != USB_DT_ENDPOINT)
+		return -EINVAL;
+
+	ep = container_of(usbep, struct udc_ep, ep);
+	dev = ep->dev;
+
+	DBG(dev, "udc_ep_enable() ep %d\n", ep->num);
+
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&dev->lock, iflags);
+	ep->ep.desc = desc;
+
+	ep->halted = 0;
+
+	/* set traffic type */
+	tmp = readl(&dev->ep[ep->num].regs->ctl);
+	tmp = AMD_ADDBITS(tmp, desc->bmAttributes, UDC_EPCTL_ET);
+	writel(tmp, &dev->ep[ep->num].regs->ctl);
+
+	/* set max packet size */
+	maxpacket = usb_endpoint_maxp(desc);
+	tmp = readl(&dev->ep[ep->num].regs->bufout_maxpkt);
+	tmp = AMD_ADDBITS(tmp, maxpacket, UDC_EP_MAX_PKT_SIZE);
+	ep->ep.maxpacket = maxpacket;
+	writel(tmp, &dev->ep[ep->num].regs->bufout_maxpkt);
+
+	/* IN ep */
+	if (ep->in) {
+
+		/* ep ix in UDC CSR register space */
+		udc_csr_epix = ep->num;
+
+		/* set buffer size (tx fifo entries) */
+		tmp = readl(&dev->ep[ep->num].regs->bufin_framenum);
+		/* double buffering: fifo size = 2 x max packet size */
+		tmp = AMD_ADDBITS(
+				tmp,
+				maxpacket * UDC_EPIN_BUFF_SIZE_MULT
+					  / UDC_DWORD_BYTES,
+				UDC_EPIN_BUFF_SIZE);
+		writel(tmp, &dev->ep[ep->num].regs->bufin_framenum);
+
+		/* calc. tx fifo base addr */
+		udc_set_txfifo_addr(ep);
+
+		/* flush fifo */
+		tmp = readl(&ep->regs->ctl);
+		tmp |= AMD_BIT(UDC_EPCTL_F);
+		writel(tmp, &ep->regs->ctl);
+
+	/* OUT ep */
+	} else {
+		/* ep ix in UDC CSR register space */
+		udc_csr_epix = ep->num - UDC_CSR_EP_OUT_IX_OFS;
+
+		/* set max packet size UDC CSR	*/
+		tmp = readl(&dev->csr->ne[ep->num - UDC_CSR_EP_OUT_IX_OFS]);
+		tmp = AMD_ADDBITS(tmp, maxpacket,
+					UDC_CSR_NE_MAX_PKT);
+		writel(tmp, &dev->csr->ne[ep->num - UDC_CSR_EP_OUT_IX_OFS]);
+
+		if (use_dma && !ep->in) {
+			/* alloc and init BNA dummy request */
+			ep->bna_dummy_req = udc_alloc_bna_dummy(ep);
+			ep->bna_occurred = 0;
+		}
+
+		if (ep->num != UDC_EP0OUT_IX)
+			dev->data_ep_enabled = 1;
+	}
+
+	/* set ep values */
+	tmp = readl(&dev->csr->ne[udc_csr_epix]);
+	/* max packet */
+	tmp = AMD_ADDBITS(tmp, maxpacket, UDC_CSR_NE_MAX_PKT);
+	/* ep number */
+	tmp = AMD_ADDBITS(tmp, desc->bEndpointAddress, UDC_CSR_NE_NUM);
+	/* ep direction */
+	tmp = AMD_ADDBITS(tmp, ep->in, UDC_CSR_NE_DIR);
+	/* ep type */
+	tmp = AMD_ADDBITS(tmp, desc->bmAttributes, UDC_CSR_NE_TYPE);
+	/* ep config */
+	tmp = AMD_ADDBITS(tmp, ep->dev->cur_config, UDC_CSR_NE_CFG);
+	/* ep interface */
+	tmp = AMD_ADDBITS(tmp, ep->dev->cur_intf, UDC_CSR_NE_INTF);
+	/* ep alt */
+	tmp = AMD_ADDBITS(tmp, ep->dev->cur_alt, UDC_CSR_NE_ALT);
+	/* write reg */
+	writel(tmp, &dev->csr->ne[udc_csr_epix]);
+
+	/* enable ep irq */
+	tmp = readl(&dev->regs->ep_irqmsk);
+	tmp &= AMD_UNMASK_BIT(ep->num);
+	writel(tmp, &dev->regs->ep_irqmsk);
+
+	/*
+	 * clear NAK by writing CNAK
+	 * avoid BNA for OUT DMA, don't clear NAK until DMA desc. written
+	 */
+	if (!use_dma || ep->in) {
+		tmp = readl(&ep->regs->ctl);
+		tmp |= AMD_BIT(UDC_EPCTL_CNAK);
+		writel(tmp, &ep->regs->ctl);
+		ep->naking = 0;
+		UDC_QUEUE_CNAK(ep, ep->num);
+	}
+	tmp = desc->bEndpointAddress;
+	DBG(dev, "%s enabled\n", usbep->name);
+
+	spin_unlock_irqrestore(&dev->lock, iflags);
+	return 0;
+}
+
+/* Resets endpoint */
+static void ep_init(struct udc_regs __iomem *regs, struct udc_ep *ep)
+{
+	u32		tmp;
+
+	VDBG(ep->dev, "ep-%d reset\n", ep->num);
+	ep->ep.desc = NULL;
+	ep->ep.ops = &udc_ep_ops;
+	INIT_LIST_HEAD(&ep->queue);
+
+	usb_ep_set_maxpacket_limit(&ep->ep,(u16) ~0);
+	/* set NAK */
+	tmp = readl(&ep->regs->ctl);
+	tmp |= AMD_BIT(UDC_EPCTL_SNAK);
+	writel(tmp, &ep->regs->ctl);
+	ep->naking = 1;
+
+	/* disable interrupt */
+	tmp = readl(&regs->ep_irqmsk);
+	tmp |= AMD_BIT(ep->num);
+	writel(tmp, &regs->ep_irqmsk);
+
+	if (ep->in) {
+		/* unset P and IN bit of potential former DMA */
+		tmp = readl(&ep->regs->ctl);
+		tmp &= AMD_UNMASK_BIT(UDC_EPCTL_P);
+		writel(tmp, &ep->regs->ctl);
+
+		tmp = readl(&ep->regs->sts);
+		tmp |= AMD_BIT(UDC_EPSTS_IN);
+		writel(tmp, &ep->regs->sts);
+
+		/* flush the fifo */
+		tmp = readl(&ep->regs->ctl);
+		tmp |= AMD_BIT(UDC_EPCTL_F);
+		writel(tmp, &ep->regs->ctl);
+
+	}
+	/* reset desc pointer */
+	writel(0, &ep->regs->desptr);
+}
+
+/* Disables endpoint, is called by gadget driver */
+static int udc_ep_disable(struct usb_ep *usbep)
+{
+	struct udc_ep	*ep = NULL;
+	unsigned long	iflags;
+
+	if (!usbep)
+		return -EINVAL;
+
+	ep = container_of(usbep, struct udc_ep, ep);
+	if (usbep->name == ep0_string || !ep->ep.desc)
+		return -EINVAL;
+
+	DBG(ep->dev, "Disable ep-%d\n", ep->num);
+
+	spin_lock_irqsave(&ep->dev->lock, iflags);
+	udc_free_request(&ep->ep, &ep->bna_dummy_req->req);
+	empty_req_queue(ep);
+	ep_init(ep->dev->regs, ep);
+	spin_unlock_irqrestore(&ep->dev->lock, iflags);
+
+	return 0;
+}
+
+/* Allocates request packet, called by gadget driver */
+static struct usb_request *
+udc_alloc_request(struct usb_ep *usbep, gfp_t gfp)
+{
+	struct udc_request	*req;
+	struct udc_data_dma	*dma_desc;
+	struct udc_ep	*ep;
+
+	if (!usbep)
+		return NULL;
+
+	ep = container_of(usbep, struct udc_ep, ep);
+
+	VDBG(ep->dev, "udc_alloc_req(): ep%d\n", ep->num);
+	req = kzalloc(sizeof(struct udc_request), gfp);
+	if (!req)
+		return NULL;
+
+	req->req.dma = DMA_DONT_USE;
+	INIT_LIST_HEAD(&req->queue);
+
+	if (ep->dma) {
+		/* ep0 in requests are allocated from data pool here */
+		dma_desc = dma_pool_alloc(ep->dev->data_requests, gfp,
+						&req->td_phys);
+		if (!dma_desc) {
+			kfree(req);
+			return NULL;
+		}
+
+		VDBG(ep->dev, "udc_alloc_req: req = %p dma_desc = %p, "
+				"td_phys = %lx\n",
+				req, dma_desc,
+				(unsigned long)req->td_phys);
+		/* prevent from using desc. - set HOST BUSY */
+		dma_desc->status = AMD_ADDBITS(dma_desc->status,
+						UDC_DMA_STP_STS_BS_HOST_BUSY,
+						UDC_DMA_STP_STS_BS);
+		dma_desc->bufptr = cpu_to_le32(DMA_DONT_USE);
+		req->td_data = dma_desc;
+		req->td_data_last = NULL;
+		req->chain_len = 1;
+	}
+
+	return &req->req;
+}
+
+/* frees pci pool descriptors of a DMA chain */
+static void udc_free_dma_chain(struct udc *dev, struct udc_request *req)
+{
+	struct udc_data_dma *td = req->td_data;
+	unsigned int i;
+
+	dma_addr_t addr_next = 0x00;
+	dma_addr_t addr = (dma_addr_t)td->next;
+
+	DBG(dev, "free chain req = %p\n", req);
+
+	/* do not free first desc., will be done by free for request */
+	for (i = 1; i < req->chain_len; i++) {
+		td = phys_to_virt(addr);
+		addr_next = (dma_addr_t)td->next;
+		dma_pool_free(dev->data_requests, td, addr);
+		addr = addr_next;
+	}
+}
+
+/* Frees request packet, called by gadget driver */
+static void
+udc_free_request(struct usb_ep *usbep, struct usb_request *usbreq)
+{
+	struct udc_ep	*ep;
+	struct udc_request	*req;
+
+	if (!usbep || !usbreq)
+		return;
+
+	ep = container_of(usbep, struct udc_ep, ep);
+	req = container_of(usbreq, struct udc_request, req);
+	VDBG(ep->dev, "free_req req=%p\n", req);
+	BUG_ON(!list_empty(&req->queue));
+	if (req->td_data) {
+		VDBG(ep->dev, "req->td_data=%p\n", req->td_data);
+
+		/* free dma chain if created */
+		if (req->chain_len > 1)
+			udc_free_dma_chain(ep->dev, req);
+
+		dma_pool_free(ep->dev->data_requests, req->td_data,
+							req->td_phys);
+	}
+	kfree(req);
+}
+
+/* Init BNA dummy descriptor for HOST BUSY and pointing to itself */
+static void udc_init_bna_dummy(struct udc_request *req)
+{
+	if (req) {
+		/* set last bit */
+		req->td_data->status |= AMD_BIT(UDC_DMA_IN_STS_L);
+		/* set next pointer to itself */
+		req->td_data->next = req->td_phys;
+		/* set HOST BUSY */
+		req->td_data->status
+			= AMD_ADDBITS(req->td_data->status,
+					UDC_DMA_STP_STS_BS_DMA_DONE,
+					UDC_DMA_STP_STS_BS);
+#ifdef UDC_VERBOSE
+		pr_debug("bna desc = %p, sts = %08x\n",
+			req->td_data, req->td_data->status);
+#endif
+	}
+}
+
+/* Allocate BNA dummy descriptor */
+static struct udc_request *udc_alloc_bna_dummy(struct udc_ep *ep)
+{
+	struct udc_request *req = NULL;
+	struct usb_request *_req = NULL;
+
+	/* alloc the dummy request */
+	_req = udc_alloc_request(&ep->ep, GFP_ATOMIC);
+	if (_req) {
+		req = container_of(_req, struct udc_request, req);
+		ep->bna_dummy_req = req;
+		udc_init_bna_dummy(req);
+	}
+	return req;
+}
+
+/* Write data to TX fifo for IN packets */
+static void
+udc_txfifo_write(struct udc_ep *ep, struct usb_request *req)
+{
+	u8			*req_buf;
+	u32			*buf;
+	int			i, j;
+	unsigned		bytes = 0;
+	unsigned		remaining = 0;
+
+	if (!req || !ep)
+		return;
+
+	req_buf = req->buf + req->actual;
+	prefetch(req_buf);
+	remaining = req->length - req->actual;
+
+	buf = (u32 *) req_buf;
+
+	bytes = ep->ep.maxpacket;
+	if (bytes > remaining)
+		bytes = remaining;
+
+	/* dwords first */
+	for (i = 0; i < bytes / UDC_DWORD_BYTES; i++)
+		writel(*(buf + i), ep->txfifo);
+
+	/* remaining bytes must be written by byte access */
+	for (j = 0; j < bytes % UDC_DWORD_BYTES; j++) {
+		writeb((u8)(*(buf + i) >> (j << UDC_BITS_PER_BYTE_SHIFT)),
+							ep->txfifo);
+	}
+
+	/* dummy write confirm */
+	writel(0, &ep->regs->confirm);
+}
+
+/* Read dwords from RX fifo for OUT transfers */
+static int udc_rxfifo_read_dwords(struct udc *dev, u32 *buf, int dwords)
+{
+	int i;
+
+	VDBG(dev, "udc_read_dwords(): %d dwords\n", dwords);
+
+	for (i = 0; i < dwords; i++)
+		*(buf + i) = readl(dev->rxfifo);
+	return 0;
+}
+
+/* Read bytes from RX fifo for OUT transfers */
+static int udc_rxfifo_read_bytes(struct udc *dev, u8 *buf, int bytes)
+{
+	int i, j;
+	u32 tmp;
+
+	VDBG(dev, "udc_read_bytes(): %d bytes\n", bytes);
+
+	/* dwords first */
+	for (i = 0; i < bytes / UDC_DWORD_BYTES; i++)
+		*((u32 *)(buf + (i<<2))) = readl(dev->rxfifo);
+
+	/* remaining bytes must be read by byte access */
+	if (bytes % UDC_DWORD_BYTES) {
+		tmp = readl(dev->rxfifo);
+		for (j = 0; j < bytes % UDC_DWORD_BYTES; j++) {
+			*(buf + (i<<2) + j) = (u8)(tmp & UDC_BYTE_MASK);
+			tmp = tmp >> UDC_BITS_PER_BYTE;
+		}
+	}
+
+	return 0;
+}
+
+/* Read data from RX fifo for OUT transfers */
+static int
+udc_rxfifo_read(struct udc_ep *ep, struct udc_request *req)
+{
+	u8 *buf;
+	unsigned buf_space;
+	unsigned bytes = 0;
+	unsigned finished = 0;
+
+	/* received number bytes */
+	bytes = readl(&ep->regs->sts);
+	bytes = AMD_GETBITS(bytes, UDC_EPSTS_RX_PKT_SIZE);
+
+	buf_space = req->req.length - req->req.actual;
+	buf = req->req.buf + req->req.actual;
+	if (bytes > buf_space) {
+		if ((buf_space % ep->ep.maxpacket) != 0) {
+			DBG(ep->dev,
+				"%s: rx %d bytes, rx-buf space = %d bytesn\n",
+				ep->ep.name, bytes, buf_space);
+			req->req.status = -EOVERFLOW;
+		}
+		bytes = buf_space;
+	}
+	req->req.actual += bytes;
+
+	/* last packet ? */
+	if (((bytes % ep->ep.maxpacket) != 0) || (!bytes)
+		|| ((req->req.actual == req->req.length) && !req->req.zero))
+		finished = 1;
+
+	/* read rx fifo bytes */
+	VDBG(ep->dev, "ep %s: rxfifo read %d bytes\n", ep->ep.name, bytes);
+	udc_rxfifo_read_bytes(ep->dev, buf, bytes);
+
+	return finished;
+}
+
+/* Creates or re-inits a DMA chain */
+static int udc_create_dma_chain(
+	struct udc_ep *ep,
+	struct udc_request *req,
+	unsigned long buf_len, gfp_t gfp_flags
+)
+{
+	unsigned long bytes = req->req.length;
+	unsigned int i;
+	dma_addr_t dma_addr;
+	struct udc_data_dma	*td = NULL;
+	struct udc_data_dma	*last = NULL;
+	unsigned long txbytes;
+	unsigned create_new_chain = 0;
+	unsigned len;
+
+	VDBG(ep->dev, "udc_create_dma_chain: bytes=%ld buf_len=%ld\n",
+	     bytes, buf_len);
+	dma_addr = DMA_DONT_USE;
+
+	/* unset L bit in first desc for OUT */
+	if (!ep->in)
+		req->td_data->status &= AMD_CLEAR_BIT(UDC_DMA_IN_STS_L);
+
+	/* alloc only new desc's if not already available */
+	len = req->req.length / ep->ep.maxpacket;
+	if (req->req.length % ep->ep.maxpacket)
+		len++;
+
+	if (len > req->chain_len) {
+		/* shorter chain already allocated before */
+		if (req->chain_len > 1)
+			udc_free_dma_chain(ep->dev, req);
+		req->chain_len = len;
+		create_new_chain = 1;
+	}
+
+	td = req->td_data;
+	/* gen. required number of descriptors and buffers */
+	for (i = buf_len; i < bytes; i += buf_len) {
+		/* create or determine next desc. */
+		if (create_new_chain) {
+			td = dma_pool_alloc(ep->dev->data_requests,
+					    gfp_flags, &dma_addr);
+			if (!td)
+				return -ENOMEM;
+
+			td->status = 0;
+		} else if (i == buf_len) {
+			/* first td */
+			td = (struct udc_data_dma *)phys_to_virt(
+						req->td_data->next);
+			td->status = 0;
+		} else {
+			td = (struct udc_data_dma *)phys_to_virt(last->next);
+			td->status = 0;
+		}
+
+		if (td)
+			td->bufptr = req->req.dma + i; /* assign buffer */
+		else
+			break;
+
+		/* short packet ? */
+		if ((bytes - i) >= buf_len) {
+			txbytes = buf_len;
+		} else {
+			/* short packet */
+			txbytes = bytes - i;
+		}
+
+		/* link td and assign tx bytes */
+		if (i == buf_len) {
+			if (create_new_chain)
+				req->td_data->next = dma_addr;
+			/*
+			 * else
+			 *	req->td_data->next = virt_to_phys(td);
+			 */
+			/* write tx bytes */
+			if (ep->in) {
+				/* first desc */
+				req->td_data->status =
+					AMD_ADDBITS(req->td_data->status,
+						    ep->ep.maxpacket,
+						    UDC_DMA_IN_STS_TXBYTES);
+				/* second desc */
+				td->status = AMD_ADDBITS(td->status,
+							txbytes,
+							UDC_DMA_IN_STS_TXBYTES);
+			}
+		} else {
+			if (create_new_chain)
+				last->next = dma_addr;
+			/*
+			 * else
+			 *	last->next = virt_to_phys(td);
+			 */
+			if (ep->in) {
+				/* write tx bytes */
+				td->status = AMD_ADDBITS(td->status,
+							txbytes,
+							UDC_DMA_IN_STS_TXBYTES);
+			}
+		}
+		last = td;
+	}
+	/* set last bit */
+	if (td) {
+		td->status |= AMD_BIT(UDC_DMA_IN_STS_L);
+		/* last desc. points to itself */
+		req->td_data_last = td;
+	}
+
+	return 0;
+}
+
+/* create/re-init a DMA descriptor or a DMA descriptor chain */
+static int prep_dma(struct udc_ep *ep, struct udc_request *req, gfp_t gfp)
+{
+	int	retval = 0;
+	u32	tmp;
+
+	VDBG(ep->dev, "prep_dma\n");
+	VDBG(ep->dev, "prep_dma ep%d req->td_data=%p\n",
+			ep->num, req->td_data);
+
+	/* set buffer pointer */
+	req->td_data->bufptr = req->req.dma;
+
+	/* set last bit */
+	req->td_data->status |= AMD_BIT(UDC_DMA_IN_STS_L);
+
+	/* build/re-init dma chain if maxpkt scatter mode, not for EP0 */
+	if (use_dma_ppb) {
+
+		retval = udc_create_dma_chain(ep, req, ep->ep.maxpacket, gfp);
+		if (retval != 0) {
+			if (retval == -ENOMEM)
+				DBG(ep->dev, "Out of DMA memory\n");
+			return retval;
+		}
+		if (ep->in) {
+			if (req->req.length == ep->ep.maxpacket) {
+				/* write tx bytes */
+				req->td_data->status =
+					AMD_ADDBITS(req->td_data->status,
+						ep->ep.maxpacket,
+						UDC_DMA_IN_STS_TXBYTES);
+
+			}
+		}
+
+	}
+
+	if (ep->in) {
+		VDBG(ep->dev, "IN: use_dma_ppb=%d req->req.len=%d "
+				"maxpacket=%d ep%d\n",
+				use_dma_ppb, req->req.length,
+				ep->ep.maxpacket, ep->num);
+		/*
+		 * if bytes < max packet then tx bytes must
+		 * be written in packet per buffer mode
+		 */
+		if (!use_dma_ppb || req->req.length < ep->ep.maxpacket
+				|| ep->num == UDC_EP0OUT_IX
+				|| ep->num == UDC_EP0IN_IX) {
+			/* write tx bytes */
+			req->td_data->status =
+				AMD_ADDBITS(req->td_data->status,
+						req->req.length,
+						UDC_DMA_IN_STS_TXBYTES);
+			/* reset frame num */
+			req->td_data->status =
+				AMD_ADDBITS(req->td_data->status,
+						0,
+						UDC_DMA_IN_STS_FRAMENUM);
+		}
+		/* set HOST BUSY */
+		req->td_data->status =
+			AMD_ADDBITS(req->td_data->status,
+				UDC_DMA_STP_STS_BS_HOST_BUSY,
+				UDC_DMA_STP_STS_BS);
+	} else {
+		VDBG(ep->dev, "OUT set host ready\n");
+		/* set HOST READY */
+		req->td_data->status =
+			AMD_ADDBITS(req->td_data->status,
+				UDC_DMA_STP_STS_BS_HOST_READY,
+				UDC_DMA_STP_STS_BS);
+
+		/* clear NAK by writing CNAK */
+		if (ep->naking) {
+			tmp = readl(&ep->regs->ctl);
+			tmp |= AMD_BIT(UDC_EPCTL_CNAK);
+			writel(tmp, &ep->regs->ctl);
+			ep->naking = 0;
+			UDC_QUEUE_CNAK(ep, ep->num);
+		}
+
+	}
+
+	return retval;
+}
+
+/* Completes request packet ... caller MUST hold lock */
+static void
+complete_req(struct udc_ep *ep, struct udc_request *req, int sts)
+__releases(ep->dev->lock)
+__acquires(ep->dev->lock)
+{
+	struct udc		*dev;
+	unsigned		halted;
+
+	VDBG(ep->dev, "complete_req(): ep%d\n", ep->num);
+
+	dev = ep->dev;
+	/* unmap DMA */
+	if (ep->dma)
+		usb_gadget_unmap_request(&dev->gadget, &req->req, ep->in);
+
+	halted = ep->halted;
+	ep->halted = 1;
+
+	/* set new status if pending */
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = sts;
+
+	/* remove from ep queue */
+	list_del_init(&req->queue);
+
+	VDBG(ep->dev, "req %p => complete %d bytes at %s with sts %d\n",
+		&req->req, req->req.length, ep->ep.name, sts);
+
+	spin_unlock(&dev->lock);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&dev->lock);
+	ep->halted = halted;
+}
+
+/* Iterates to the end of a DMA chain and returns last descriptor */
+static struct udc_data_dma *udc_get_last_dma_desc(struct udc_request *req)
+{
+	struct udc_data_dma	*td;
+
+	td = req->td_data;
+	while (td && !(td->status & AMD_BIT(UDC_DMA_IN_STS_L)))
+		td = phys_to_virt(td->next);
+
+	return td;
+
+}
+
+/* Iterates to the end of a DMA chain and counts bytes received */
+static u32 udc_get_ppbdu_rxbytes(struct udc_request *req)
+{
+	struct udc_data_dma	*td;
+	u32 count;
+
+	td = req->td_data;
+	/* received number bytes */
+	count = AMD_GETBITS(td->status, UDC_DMA_OUT_STS_RXBYTES);
+
+	while (td && !(td->status & AMD_BIT(UDC_DMA_IN_STS_L))) {
+		td = phys_to_virt(td->next);
+		/* received number bytes */
+		if (td) {
+			count += AMD_GETBITS(td->status,
+				UDC_DMA_OUT_STS_RXBYTES);
+		}
+	}
+
+	return count;
+
+}
+
+/* Enabling RX DMA */
+static void udc_set_rde(struct udc *dev)
+{
+	u32 tmp;
+
+	VDBG(dev, "udc_set_rde()\n");
+	/* stop RDE timer */
+	if (timer_pending(&udc_timer)) {
+		set_rde = 0;
+		mod_timer(&udc_timer, jiffies - 1);
+	}
+	/* set RDE */
+	tmp = readl(&dev->regs->ctl);
+	tmp |= AMD_BIT(UDC_DEVCTL_RDE);
+	writel(tmp, &dev->regs->ctl);
+}
+
+/* Queues a request packet, called by gadget driver */
+static int
+udc_queue(struct usb_ep *usbep, struct usb_request *usbreq, gfp_t gfp)
+{
+	int			retval = 0;
+	u8			open_rxfifo = 0;
+	unsigned long		iflags;
+	struct udc_ep		*ep;
+	struct udc_request	*req;
+	struct udc		*dev;
+	u32			tmp;
+
+	/* check the inputs */
+	req = container_of(usbreq, struct udc_request, req);
+
+	if (!usbep || !usbreq || !usbreq->complete || !usbreq->buf
+			|| !list_empty(&req->queue))
+		return -EINVAL;
+
+	ep = container_of(usbep, struct udc_ep, ep);
+	if (!ep->ep.desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX))
+		return -EINVAL;
+
+	VDBG(ep->dev, "udc_queue(): ep%d-in=%d\n", ep->num, ep->in);
+	dev = ep->dev;
+
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	/* map dma (usually done before) */
+	if (ep->dma) {
+		VDBG(dev, "DMA map req %p\n", req);
+		retval = usb_gadget_map_request(&udc->gadget, usbreq, ep->in);
+		if (retval)
+			return retval;
+	}
+
+	VDBG(dev, "%s queue req %p, len %d req->td_data=%p buf %p\n",
+			usbep->name, usbreq, usbreq->length,
+			req->td_data, usbreq->buf);
+
+	spin_lock_irqsave(&dev->lock, iflags);
+	usbreq->actual = 0;
+	usbreq->status = -EINPROGRESS;
+	req->dma_done = 0;
+
+	/* on empty queue just do first transfer */
+	if (list_empty(&ep->queue)) {
+		/* zlp */
+		if (usbreq->length == 0) {
+			/* IN zlp's are handled by hardware */
+			complete_req(ep, req, 0);
+			VDBG(dev, "%s: zlp\n", ep->ep.name);
+			/*
+			 * if set_config or set_intf is waiting for ack by zlp
+			 * then set CSR_DONE
+			 */
+			if (dev->set_cfg_not_acked) {
+				tmp = readl(&dev->regs->ctl);
+				tmp |= AMD_BIT(UDC_DEVCTL_CSR_DONE);
+				writel(tmp, &dev->regs->ctl);
+				dev->set_cfg_not_acked = 0;
+			}
+			/* setup command is ACK'ed now by zlp */
+			if (dev->waiting_zlp_ack_ep0in) {
+				/* clear NAK by writing CNAK in EP0_IN */
+				tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->ctl);
+				tmp |= AMD_BIT(UDC_EPCTL_CNAK);
+				writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl);
+				dev->ep[UDC_EP0IN_IX].naking = 0;
+				UDC_QUEUE_CNAK(&dev->ep[UDC_EP0IN_IX],
+							UDC_EP0IN_IX);
+				dev->waiting_zlp_ack_ep0in = 0;
+			}
+			goto finished;
+		}
+		if (ep->dma) {
+			retval = prep_dma(ep, req, GFP_ATOMIC);
+			if (retval != 0)
+				goto finished;
+			/* write desc pointer to enable DMA */
+			if (ep->in) {
+				/* set HOST READY */
+				req->td_data->status =
+					AMD_ADDBITS(req->td_data->status,
+						UDC_DMA_IN_STS_BS_HOST_READY,
+						UDC_DMA_IN_STS_BS);
+			}
+
+			/* disabled rx dma while descriptor update */
+			if (!ep->in) {
+				/* stop RDE timer */
+				if (timer_pending(&udc_timer)) {
+					set_rde = 0;
+					mod_timer(&udc_timer, jiffies - 1);
+				}
+				/* clear RDE */
+				tmp = readl(&dev->regs->ctl);
+				tmp &= AMD_UNMASK_BIT(UDC_DEVCTL_RDE);
+				writel(tmp, &dev->regs->ctl);
+				open_rxfifo = 1;
+
+				/*
+				 * if BNA occurred then let BNA dummy desc.
+				 * point to current desc.
+				 */
+				if (ep->bna_occurred) {
+					VDBG(dev, "copy to BNA dummy desc.\n");
+					memcpy(ep->bna_dummy_req->td_data,
+						req->td_data,
+						sizeof(struct udc_data_dma));
+				}
+			}
+			/* write desc pointer */
+			writel(req->td_phys, &ep->regs->desptr);
+
+			/* clear NAK by writing CNAK */
+			if (ep->naking) {
+				tmp = readl(&ep->regs->ctl);
+				tmp |= AMD_BIT(UDC_EPCTL_CNAK);
+				writel(tmp, &ep->regs->ctl);
+				ep->naking = 0;
+				UDC_QUEUE_CNAK(ep, ep->num);
+			}
+
+			if (ep->in) {
+				/* enable ep irq */
+				tmp = readl(&dev->regs->ep_irqmsk);
+				tmp &= AMD_UNMASK_BIT(ep->num);
+				writel(tmp, &dev->regs->ep_irqmsk);
+			}
+		} else if (ep->in) {
+				/* enable ep irq */
+				tmp = readl(&dev->regs->ep_irqmsk);
+				tmp &= AMD_UNMASK_BIT(ep->num);
+				writel(tmp, &dev->regs->ep_irqmsk);
+			}
+
+	} else if (ep->dma) {
+
+		/*
+		 * prep_dma not used for OUT ep's, this is not possible
+		 * for PPB modes, because of chain creation reasons
+		 */
+		if (ep->in) {
+			retval = prep_dma(ep, req, GFP_ATOMIC);
+			if (retval != 0)
+				goto finished;
+		}
+	}
+	VDBG(dev, "list_add\n");
+	/* add request to ep queue */
+	if (req) {
+
+		list_add_tail(&req->queue, &ep->queue);
+
+		/* open rxfifo if out data queued */
+		if (open_rxfifo) {
+			/* enable DMA */
+			req->dma_going = 1;
+			udc_set_rde(dev);
+			if (ep->num != UDC_EP0OUT_IX)
+				dev->data_ep_queued = 1;
+		}
+		/* stop OUT naking */
+		if (!ep->in) {
+			if (!use_dma && udc_rxfifo_pending) {
+				DBG(dev, "udc_queue(): pending bytes in "
+					"rxfifo after nyet\n");
+				/*
+				 * read pending bytes afer nyet:
+				 * referring to isr
+				 */
+				if (udc_rxfifo_read(ep, req)) {
+					/* finish */
+					complete_req(ep, req, 0);
+				}
+				udc_rxfifo_pending = 0;
+
+			}
+		}
+	}
+
+finished:
+	spin_unlock_irqrestore(&dev->lock, iflags);
+	return retval;
+}
+
+/* Empty request queue of an endpoint; caller holds spinlock */
+void empty_req_queue(struct udc_ep *ep)
+{
+	struct udc_request	*req;
+
+	ep->halted = 1;
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next,
+			struct udc_request,
+			queue);
+		complete_req(ep, req, -ESHUTDOWN);
+	}
+}
+EXPORT_SYMBOL_GPL(empty_req_queue);
+
+/* Dequeues a request packet, called by gadget driver */
+static int udc_dequeue(struct usb_ep *usbep, struct usb_request *usbreq)
+{
+	struct udc_ep		*ep;
+	struct udc_request	*req;
+	unsigned		halted;
+	unsigned long		iflags;
+
+	ep = container_of(usbep, struct udc_ep, ep);
+	if (!usbep || !usbreq || (!ep->ep.desc && (ep->num != 0
+				&& ep->num != UDC_EP0OUT_IX)))
+		return -EINVAL;
+
+	req = container_of(usbreq, struct udc_request, req);
+
+	spin_lock_irqsave(&ep->dev->lock, iflags);
+	halted = ep->halted;
+	ep->halted = 1;
+	/* request in processing or next one */
+	if (ep->queue.next == &req->queue) {
+		if (ep->dma && req->dma_going) {
+			if (ep->in)
+				ep->cancel_transfer = 1;
+			else {
+				u32 tmp;
+				u32 dma_sts;
+				/* stop potential receive DMA */
+				tmp = readl(&udc->regs->ctl);
+				writel(tmp & AMD_UNMASK_BIT(UDC_DEVCTL_RDE),
+							&udc->regs->ctl);
+				/*
+				 * Cancel transfer later in ISR
+				 * if descriptor was touched.
+				 */
+				dma_sts = AMD_GETBITS(req->td_data->status,
+							UDC_DMA_OUT_STS_BS);
+				if (dma_sts != UDC_DMA_OUT_STS_BS_HOST_READY)
+					ep->cancel_transfer = 1;
+				else {
+					udc_init_bna_dummy(ep->req);
+					writel(ep->bna_dummy_req->td_phys,
+						&ep->regs->desptr);
+				}
+				writel(tmp, &udc->regs->ctl);
+			}
+		}
+	}
+	complete_req(ep, req, -ECONNRESET);
+	ep->halted = halted;
+
+	spin_unlock_irqrestore(&ep->dev->lock, iflags);
+	return 0;
+}
+
+/* Halt or clear halt of endpoint */
+static int
+udc_set_halt(struct usb_ep *usbep, int halt)
+{
+	struct udc_ep	*ep;
+	u32 tmp;
+	unsigned long iflags;
+	int retval = 0;
+
+	if (!usbep)
+		return -EINVAL;
+
+	pr_debug("set_halt %s: halt=%d\n", usbep->name, halt);
+
+	ep = container_of(usbep, struct udc_ep, ep);
+	if (!ep->ep.desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX))
+		return -EINVAL;
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&udc_stall_spinlock, iflags);
+	/* halt or clear halt */
+	if (halt) {
+		if (ep->num == 0)
+			ep->dev->stall_ep0in = 1;
+		else {
+			/*
+			 * set STALL
+			 * rxfifo empty not taken into acount
+			 */
+			tmp = readl(&ep->regs->ctl);
+			tmp |= AMD_BIT(UDC_EPCTL_S);
+			writel(tmp, &ep->regs->ctl);
+			ep->halted = 1;
+
+			/* setup poll timer */
+			if (!timer_pending(&udc_pollstall_timer)) {
+				udc_pollstall_timer.expires = jiffies +
+					HZ * UDC_POLLSTALL_TIMER_USECONDS
+					/ (1000 * 1000);
+				if (!stop_pollstall_timer) {
+					DBG(ep->dev, "start polltimer\n");
+					add_timer(&udc_pollstall_timer);
+				}
+			}
+		}
+	} else {
+		/* ep is halted by set_halt() before */
+		if (ep->halted) {
+			tmp = readl(&ep->regs->ctl);
+			/* clear stall bit */
+			tmp = tmp & AMD_CLEAR_BIT(UDC_EPCTL_S);
+			/* clear NAK by writing CNAK */
+			tmp |= AMD_BIT(UDC_EPCTL_CNAK);
+			writel(tmp, &ep->regs->ctl);
+			ep->halted = 0;
+			UDC_QUEUE_CNAK(ep, ep->num);
+		}
+	}
+	spin_unlock_irqrestore(&udc_stall_spinlock, iflags);
+	return retval;
+}
+
+/* gadget interface */
+static const struct usb_ep_ops udc_ep_ops = {
+	.enable		= udc_ep_enable,
+	.disable	= udc_ep_disable,
+
+	.alloc_request	= udc_alloc_request,
+	.free_request	= udc_free_request,
+
+	.queue		= udc_queue,
+	.dequeue	= udc_dequeue,
+
+	.set_halt	= udc_set_halt,
+	/* fifo ops not implemented */
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Get frame counter (not implemented) */
+static int udc_get_frame(struct usb_gadget *gadget)
+{
+	return -EOPNOTSUPP;
+}
+
+/* Initiates a remote wakeup */
+static int udc_remote_wakeup(struct udc *dev)
+{
+	unsigned long flags;
+	u32 tmp;
+
+	DBG(dev, "UDC initiates remote wakeup\n");
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	tmp = readl(&dev->regs->ctl);
+	tmp |= AMD_BIT(UDC_DEVCTL_RES);
+	writel(tmp, &dev->regs->ctl);
+	tmp &= AMD_CLEAR_BIT(UDC_DEVCTL_RES);
+	writel(tmp, &dev->regs->ctl);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return 0;
+}
+
+/* Remote wakeup gadget interface */
+static int udc_wakeup(struct usb_gadget *gadget)
+{
+	struct udc		*dev;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct udc, gadget);
+	udc_remote_wakeup(dev);
+
+	return 0;
+}
+
+static int amd5536_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+static int amd5536_udc_stop(struct usb_gadget *g);
+
+static const struct usb_gadget_ops udc_ops = {
+	.wakeup		= udc_wakeup,
+	.get_frame	= udc_get_frame,
+	.udc_start	= amd5536_udc_start,
+	.udc_stop	= amd5536_udc_stop,
+};
+
+/* Setups endpoint parameters, adds endpoints to linked list */
+static void make_ep_lists(struct udc *dev)
+{
+	/* make gadget ep lists */
+	INIT_LIST_HEAD(&dev->gadget.ep_list);
+	list_add_tail(&dev->ep[UDC_EPIN_STATUS_IX].ep.ep_list,
+						&dev->gadget.ep_list);
+	list_add_tail(&dev->ep[UDC_EPIN_IX].ep.ep_list,
+						&dev->gadget.ep_list);
+	list_add_tail(&dev->ep[UDC_EPOUT_IX].ep.ep_list,
+						&dev->gadget.ep_list);
+
+	/* fifo config */
+	dev->ep[UDC_EPIN_STATUS_IX].fifo_depth = UDC_EPIN_SMALLINT_BUFF_SIZE;
+	if (dev->gadget.speed == USB_SPEED_FULL)
+		dev->ep[UDC_EPIN_IX].fifo_depth = UDC_FS_EPIN_BUFF_SIZE;
+	else if (dev->gadget.speed == USB_SPEED_HIGH)
+		dev->ep[UDC_EPIN_IX].fifo_depth = hs_tx_buf;
+	dev->ep[UDC_EPOUT_IX].fifo_depth = UDC_RXFIFO_SIZE;
+}
+
+/* Inits UDC context */
+void udc_basic_init(struct udc *dev)
+{
+	u32	tmp;
+
+	DBG(dev, "udc_basic_init()\n");
+
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+
+	/* stop RDE timer */
+	if (timer_pending(&udc_timer)) {
+		set_rde = 0;
+		mod_timer(&udc_timer, jiffies - 1);
+	}
+	/* stop poll stall timer */
+	if (timer_pending(&udc_pollstall_timer))
+		mod_timer(&udc_pollstall_timer, jiffies - 1);
+	/* disable DMA */
+	tmp = readl(&dev->regs->ctl);
+	tmp &= AMD_UNMASK_BIT(UDC_DEVCTL_RDE);
+	tmp &= AMD_UNMASK_BIT(UDC_DEVCTL_TDE);
+	writel(tmp, &dev->regs->ctl);
+
+	/* enable dynamic CSR programming */
+	tmp = readl(&dev->regs->cfg);
+	tmp |= AMD_BIT(UDC_DEVCFG_CSR_PRG);
+	/* set self powered */
+	tmp |= AMD_BIT(UDC_DEVCFG_SP);
+	/* set remote wakeupable */
+	tmp |= AMD_BIT(UDC_DEVCFG_RWKP);
+	writel(tmp, &dev->regs->cfg);
+
+	make_ep_lists(dev);
+
+	dev->data_ep_enabled = 0;
+	dev->data_ep_queued = 0;
+}
+EXPORT_SYMBOL_GPL(udc_basic_init);
+
+/* init registers at driver load time */
+static int startup_registers(struct udc *dev)
+{
+	u32 tmp;
+
+	/* init controller by soft reset */
+	udc_soft_reset(dev);
+
+	/* mask not needed interrupts */
+	udc_mask_unused_interrupts(dev);
+
+	/* put into initial config */
+	udc_basic_init(dev);
+	/* link up all endpoints */
+	udc_setup_endpoints(dev);
+
+	/* program speed */
+	tmp = readl(&dev->regs->cfg);
+	if (use_fullspeed)
+		tmp = AMD_ADDBITS(tmp, UDC_DEVCFG_SPD_FS, UDC_DEVCFG_SPD);
+	else
+		tmp = AMD_ADDBITS(tmp, UDC_DEVCFG_SPD_HS, UDC_DEVCFG_SPD);
+	writel(tmp, &dev->regs->cfg);
+
+	return 0;
+}
+
+/* Sets initial endpoint parameters */
+static void udc_setup_endpoints(struct udc *dev)
+{
+	struct udc_ep	*ep;
+	u32	tmp;
+	u32	reg;
+
+	DBG(dev, "udc_setup_endpoints()\n");
+
+	/* read enum speed */
+	tmp = readl(&dev->regs->sts);
+	tmp = AMD_GETBITS(tmp, UDC_DEVSTS_ENUM_SPEED);
+	if (tmp == UDC_DEVSTS_ENUM_SPEED_HIGH)
+		dev->gadget.speed = USB_SPEED_HIGH;
+	else if (tmp == UDC_DEVSTS_ENUM_SPEED_FULL)
+		dev->gadget.speed = USB_SPEED_FULL;
+
+	/* set basic ep parameters */
+	for (tmp = 0; tmp < UDC_EP_NUM; tmp++) {
+		ep = &dev->ep[tmp];
+		ep->dev = dev;
+		ep->ep.name = ep_info[tmp].name;
+		ep->ep.caps = ep_info[tmp].caps;
+		ep->num = tmp;
+		/* txfifo size is calculated at enable time */
+		ep->txfifo = dev->txfifo;
+
+		/* fifo size */
+		if (tmp < UDC_EPIN_NUM) {
+			ep->fifo_depth = UDC_TXFIFO_SIZE;
+			ep->in = 1;
+		} else {
+			ep->fifo_depth = UDC_RXFIFO_SIZE;
+			ep->in = 0;
+
+		}
+		ep->regs = &dev->ep_regs[tmp];
+		/*
+		 * ep will be reset only if ep was not enabled before to avoid
+		 * disabling ep interrupts when ENUM interrupt occurs but ep is
+		 * not enabled by gadget driver
+		 */
+		if (!ep->ep.desc)
+			ep_init(dev->regs, ep);
+
+		if (use_dma) {
+			/*
+			 * ep->dma is not really used, just to indicate that
+			 * DMA is active: remove this
+			 * dma regs = dev control regs
+			 */
+			ep->dma = &dev->regs->ctl;
+
+			/* nak OUT endpoints until enable - not for ep0 */
+			if (tmp != UDC_EP0IN_IX && tmp != UDC_EP0OUT_IX
+						&& tmp > UDC_EPIN_NUM) {
+				/* set NAK */
+				reg = readl(&dev->ep[tmp].regs->ctl);
+				reg |= AMD_BIT(UDC_EPCTL_SNAK);
+				writel(reg, &dev->ep[tmp].regs->ctl);
+				dev->ep[tmp].naking = 1;
+
+			}
+		}
+	}
+	/* EP0 max packet */
+	if (dev->gadget.speed == USB_SPEED_FULL) {
+		usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0IN_IX].ep,
+					   UDC_FS_EP0IN_MAX_PKT_SIZE);
+		usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0OUT_IX].ep,
+					   UDC_FS_EP0OUT_MAX_PKT_SIZE);
+	} else if (dev->gadget.speed == USB_SPEED_HIGH) {
+		usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0IN_IX].ep,
+					   UDC_EP0IN_MAX_PKT_SIZE);
+		usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0OUT_IX].ep,
+					   UDC_EP0OUT_MAX_PKT_SIZE);
+	}
+
+	/*
+	 * with suspend bug workaround, ep0 params for gadget driver
+	 * are set at gadget driver bind() call
+	 */
+	dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IX].ep;
+	dev->ep[UDC_EP0IN_IX].halted = 0;
+	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+
+	/* init cfg/alt/int */
+	dev->cur_config = 0;
+	dev->cur_intf = 0;
+	dev->cur_alt = 0;
+}
+
+/* Bringup after Connect event, initial bringup to be ready for ep0 events */
+static void usb_connect(struct udc *dev)
+{
+	/* Return if already connected */
+	if (dev->connected)
+		return;
+
+	dev_info(dev->dev, "USB Connect\n");
+
+	dev->connected = 1;
+
+	/* put into initial config */
+	udc_basic_init(dev);
+
+	/* enable device setup interrupts */
+	udc_enable_dev_setup_interrupts(dev);
+}
+
+/*
+ * Calls gadget with disconnect event and resets the UDC and makes
+ * initial bringup to be ready for ep0 events
+ */
+static void usb_disconnect(struct udc *dev)
+{
+	u32 tmp;
+
+	/* Return if already disconnected */
+	if (!dev->connected)
+		return;
+
+	dev_info(dev->dev, "USB Disconnect\n");
+
+	dev->connected = 0;
+
+	/* mask interrupts */
+	udc_mask_unused_interrupts(dev);
+
+	if (dev->driver) {
+		spin_unlock(&dev->lock);
+		dev->driver->disconnect(&dev->gadget);
+		spin_lock(&dev->lock);
+
+		/* empty queues */
+		for (tmp = 0; tmp < UDC_EP_NUM; tmp++)
+			empty_req_queue(&dev->ep[tmp]);
+	}
+
+	/* disable ep0 */
+	ep_init(dev->regs, &dev->ep[UDC_EP0IN_IX]);
+
+	if (!soft_reset_occured) {
+		/* init controller by soft reset */
+		udc_soft_reset(dev);
+		soft_reset_occured++;
+	}
+
+	/* re-enable dev interrupts */
+	udc_enable_dev_setup_interrupts(dev);
+	/* back to full speed ? */
+	if (use_fullspeed) {
+		tmp = readl(&dev->regs->cfg);
+		tmp = AMD_ADDBITS(tmp, UDC_DEVCFG_SPD_FS, UDC_DEVCFG_SPD);
+		writel(tmp, &dev->regs->cfg);
+	}
+}
+
+/* Reset the UDC core */
+static void udc_soft_reset(struct udc *dev)
+{
+	unsigned long	flags;
+
+	DBG(dev, "Soft reset\n");
+	/*
+	 * reset possible waiting interrupts, because int.
+	 * status is lost after soft reset,
+	 * ep int. status reset
+	 */
+	writel(UDC_EPINT_MSK_DISABLE_ALL, &dev->regs->ep_irqsts);
+	/* device int. status reset */
+	writel(UDC_DEV_MSK_DISABLE, &dev->regs->irqsts);
+
+	/* Don't do this for Broadcom UDC since this is a reserved
+	 * bit.
+	 */
+	if (dev->chiprev != UDC_BCM_REV) {
+		spin_lock_irqsave(&udc_irq_spinlock, flags);
+		writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg);
+		readl(&dev->regs->cfg);
+		spin_unlock_irqrestore(&udc_irq_spinlock, flags);
+	}
+}
+
+/* RDE timer callback to set RDE bit */
+static void udc_timer_function(struct timer_list *unused)
+{
+	u32 tmp;
+
+	spin_lock_irq(&udc_irq_spinlock);
+
+	if (set_rde > 0) {
+		/*
+		 * open the fifo if fifo was filled on last timer call
+		 * conditionally
+		 */
+		if (set_rde > 1) {
+			/* set RDE to receive setup data */
+			tmp = readl(&udc->regs->ctl);
+			tmp |= AMD_BIT(UDC_DEVCTL_RDE);
+			writel(tmp, &udc->regs->ctl);
+			set_rde = -1;
+		} else if (readl(&udc->regs->sts)
+				& AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY)) {
+			/*
+			 * if fifo empty setup polling, do not just
+			 * open the fifo
+			 */
+			udc_timer.expires = jiffies + HZ/UDC_RDE_TIMER_DIV;
+			if (!stop_timer)
+				add_timer(&udc_timer);
+		} else {
+			/*
+			 * fifo contains data now, setup timer for opening
+			 * the fifo when timer expires to be able to receive
+			 * setup packets, when data packets gets queued by
+			 * gadget layer then timer will forced to expire with
+			 * set_rde=0 (RDE is set in udc_queue())
+			 */
+			set_rde++;
+			/* debug: lhadmot_timer_start = 221070 */
+			udc_timer.expires = jiffies + HZ*UDC_RDE_TIMER_SECONDS;
+			if (!stop_timer)
+				add_timer(&udc_timer);
+		}
+
+	} else
+		set_rde = -1; /* RDE was set by udc_queue() */
+	spin_unlock_irq(&udc_irq_spinlock);
+	if (stop_timer)
+		complete(&on_exit);
+
+}
+
+/* Handle halt state, used in stall poll timer */
+static void udc_handle_halt_state(struct udc_ep *ep)
+{
+	u32 tmp;
+	/* set stall as long not halted */
+	if (ep->halted == 1) {
+		tmp = readl(&ep->regs->ctl);
+		/* STALL cleared ? */
+		if (!(tmp & AMD_BIT(UDC_EPCTL_S))) {
+			/*
+			 * FIXME: MSC spec requires that stall remains
+			 * even on receivng of CLEAR_FEATURE HALT. So
+			 * we would set STALL again here to be compliant.
+			 * But with current mass storage drivers this does
+			 * not work (would produce endless host retries).
+			 * So we clear halt on CLEAR_FEATURE.
+			 *
+			DBG(ep->dev, "ep %d: set STALL again\n", ep->num);
+			tmp |= AMD_BIT(UDC_EPCTL_S);
+			writel(tmp, &ep->regs->ctl);*/
+
+			/* clear NAK by writing CNAK */
+			tmp |= AMD_BIT(UDC_EPCTL_CNAK);
+			writel(tmp, &ep->regs->ctl);
+			ep->halted = 0;
+			UDC_QUEUE_CNAK(ep, ep->num);
+		}
+	}
+}
+
+/* Stall timer callback to poll S bit and set it again after */
+static void udc_pollstall_timer_function(struct timer_list *unused)
+{
+	struct udc_ep *ep;
+	int halted = 0;
+
+	spin_lock_irq(&udc_stall_spinlock);
+	/*
+	 * only one IN and OUT endpoints are handled
+	 * IN poll stall
+	 */
+	ep = &udc->ep[UDC_EPIN_IX];
+	udc_handle_halt_state(ep);
+	if (ep->halted)
+		halted = 1;
+	/* OUT poll stall */
+	ep = &udc->ep[UDC_EPOUT_IX];
+	udc_handle_halt_state(ep);
+	if (ep->halted)
+		halted = 1;
+
+	/* setup timer again when still halted */
+	if (!stop_pollstall_timer && halted) {
+		udc_pollstall_timer.expires = jiffies +
+					HZ * UDC_POLLSTALL_TIMER_USECONDS
+					/ (1000 * 1000);
+		add_timer(&udc_pollstall_timer);
+	}
+	spin_unlock_irq(&udc_stall_spinlock);
+
+	if (stop_pollstall_timer)
+		complete(&on_pollstall_exit);
+}
+
+/* Inits endpoint 0 so that SETUP packets are processed */
+static void activate_control_endpoints(struct udc *dev)
+{
+	u32 tmp;
+
+	DBG(dev, "activate_control_endpoints\n");
+
+	/* flush fifo */
+	tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->ctl);
+	tmp |= AMD_BIT(UDC_EPCTL_F);
+	writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl);
+
+	/* set ep0 directions */
+	dev->ep[UDC_EP0IN_IX].in = 1;
+	dev->ep[UDC_EP0OUT_IX].in = 0;
+
+	/* set buffer size (tx fifo entries) of EP0_IN */
+	tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->bufin_framenum);
+	if (dev->gadget.speed == USB_SPEED_FULL)
+		tmp = AMD_ADDBITS(tmp, UDC_FS_EPIN0_BUFF_SIZE,
+					UDC_EPIN_BUFF_SIZE);
+	else if (dev->gadget.speed == USB_SPEED_HIGH)
+		tmp = AMD_ADDBITS(tmp, UDC_EPIN0_BUFF_SIZE,
+					UDC_EPIN_BUFF_SIZE);
+	writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->bufin_framenum);
+
+	/* set max packet size of EP0_IN */
+	tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->bufout_maxpkt);
+	if (dev->gadget.speed == USB_SPEED_FULL)
+		tmp = AMD_ADDBITS(tmp, UDC_FS_EP0IN_MAX_PKT_SIZE,
+					UDC_EP_MAX_PKT_SIZE);
+	else if (dev->gadget.speed == USB_SPEED_HIGH)
+		tmp = AMD_ADDBITS(tmp, UDC_EP0IN_MAX_PKT_SIZE,
+				UDC_EP_MAX_PKT_SIZE);
+	writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->bufout_maxpkt);
+
+	/* set max packet size of EP0_OUT */
+	tmp = readl(&dev->ep[UDC_EP0OUT_IX].regs->bufout_maxpkt);
+	if (dev->gadget.speed == USB_SPEED_FULL)
+		tmp = AMD_ADDBITS(tmp, UDC_FS_EP0OUT_MAX_PKT_SIZE,
+					UDC_EP_MAX_PKT_SIZE);
+	else if (dev->gadget.speed == USB_SPEED_HIGH)
+		tmp = AMD_ADDBITS(tmp, UDC_EP0OUT_MAX_PKT_SIZE,
+					UDC_EP_MAX_PKT_SIZE);
+	writel(tmp, &dev->ep[UDC_EP0OUT_IX].regs->bufout_maxpkt);
+
+	/* set max packet size of EP0 in UDC CSR */
+	tmp = readl(&dev->csr->ne[0]);
+	if (dev->gadget.speed == USB_SPEED_FULL)
+		tmp = AMD_ADDBITS(tmp, UDC_FS_EP0OUT_MAX_PKT_SIZE,
+					UDC_CSR_NE_MAX_PKT);
+	else if (dev->gadget.speed == USB_SPEED_HIGH)
+		tmp = AMD_ADDBITS(tmp, UDC_EP0OUT_MAX_PKT_SIZE,
+					UDC_CSR_NE_MAX_PKT);
+	writel(tmp, &dev->csr->ne[0]);
+
+	if (use_dma) {
+		dev->ep[UDC_EP0OUT_IX].td->status |=
+			AMD_BIT(UDC_DMA_OUT_STS_L);
+		/* write dma desc address */
+		writel(dev->ep[UDC_EP0OUT_IX].td_stp_dma,
+			&dev->ep[UDC_EP0OUT_IX].regs->subptr);
+		writel(dev->ep[UDC_EP0OUT_IX].td_phys,
+			&dev->ep[UDC_EP0OUT_IX].regs->desptr);
+		/* stop RDE timer */
+		if (timer_pending(&udc_timer)) {
+			set_rde = 0;
+			mod_timer(&udc_timer, jiffies - 1);
+		}
+		/* stop pollstall timer */
+		if (timer_pending(&udc_pollstall_timer))
+			mod_timer(&udc_pollstall_timer, jiffies - 1);
+		/* enable DMA */
+		tmp = readl(&dev->regs->ctl);
+		tmp |= AMD_BIT(UDC_DEVCTL_MODE)
+				| AMD_BIT(UDC_DEVCTL_RDE)
+				| AMD_BIT(UDC_DEVCTL_TDE);
+		if (use_dma_bufferfill_mode)
+			tmp |= AMD_BIT(UDC_DEVCTL_BF);
+		else if (use_dma_ppb_du)
+			tmp |= AMD_BIT(UDC_DEVCTL_DU);
+		writel(tmp, &dev->regs->ctl);
+	}
+
+	/* clear NAK by writing CNAK for EP0IN */
+	tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->ctl);
+	tmp |= AMD_BIT(UDC_EPCTL_CNAK);
+	writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl);
+	dev->ep[UDC_EP0IN_IX].naking = 0;
+	UDC_QUEUE_CNAK(&dev->ep[UDC_EP0IN_IX], UDC_EP0IN_IX);
+
+	/* clear NAK by writing CNAK for EP0OUT */
+	tmp = readl(&dev->ep[UDC_EP0OUT_IX].regs->ctl);
+	tmp |= AMD_BIT(UDC_EPCTL_CNAK);
+	writel(tmp, &dev->ep[UDC_EP0OUT_IX].regs->ctl);
+	dev->ep[UDC_EP0OUT_IX].naking = 0;
+	UDC_QUEUE_CNAK(&dev->ep[UDC_EP0OUT_IX], UDC_EP0OUT_IX);
+}
+
+/* Make endpoint 0 ready for control traffic */
+static int setup_ep0(struct udc *dev)
+{
+	activate_control_endpoints(dev);
+	/* enable ep0 interrupts */
+	udc_enable_ep0_interrupts(dev);
+	/* enable device setup interrupts */
+	udc_enable_dev_setup_interrupts(dev);
+
+	return 0;
+}
+
+/* Called by gadget driver to register itself */
+static int amd5536_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct udc *dev = to_amd5536_udc(g);
+	u32 tmp;
+
+	dev->driver = driver;
+
+	/* Some gadget drivers use both ep0 directions.
+	 * NOTE: to gadget driver, ep0 is just one endpoint...
+	 */
+	dev->ep[UDC_EP0OUT_IX].ep.driver_data =
+		dev->ep[UDC_EP0IN_IX].ep.driver_data;
+
+	/* get ready for ep0 traffic */
+	setup_ep0(dev);
+
+	/* clear SD */
+	tmp = readl(&dev->regs->ctl);
+	tmp = tmp & AMD_CLEAR_BIT(UDC_DEVCTL_SD);
+	writel(tmp, &dev->regs->ctl);
+
+	usb_connect(dev);
+
+	return 0;
+}
+
+/* shutdown requests and disconnect from gadget */
+static void
+shutdown(struct udc *dev, struct usb_gadget_driver *driver)
+__releases(dev->lock)
+__acquires(dev->lock)
+{
+	int tmp;
+
+	/* empty queues and init hardware */
+	udc_basic_init(dev);
+
+	for (tmp = 0; tmp < UDC_EP_NUM; tmp++)
+		empty_req_queue(&dev->ep[tmp]);
+
+	udc_setup_endpoints(dev);
+}
+
+/* Called by gadget driver to unregister itself */
+static int amd5536_udc_stop(struct usb_gadget *g)
+{
+	struct udc *dev = to_amd5536_udc(g);
+	unsigned long flags;
+	u32 tmp;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	udc_mask_unused_interrupts(dev);
+	shutdown(dev, NULL);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	dev->driver = NULL;
+
+	/* set SD */
+	tmp = readl(&dev->regs->ctl);
+	tmp |= AMD_BIT(UDC_DEVCTL_SD);
+	writel(tmp, &dev->regs->ctl);
+
+	return 0;
+}
+
+/* Clear pending NAK bits */
+static void udc_process_cnak_queue(struct udc *dev)
+{
+	u32 tmp;
+	u32 reg;
+
+	/* check epin's */
+	DBG(dev, "CNAK pending queue processing\n");
+	for (tmp = 0; tmp < UDC_EPIN_NUM_USED; tmp++) {
+		if (cnak_pending & (1 << tmp)) {
+			DBG(dev, "CNAK pending for ep%d\n", tmp);
+			/* clear NAK by writing CNAK */
+			reg = readl(&dev->ep[tmp].regs->ctl);
+			reg |= AMD_BIT(UDC_EPCTL_CNAK);
+			writel(reg, &dev->ep[tmp].regs->ctl);
+			dev->ep[tmp].naking = 0;
+			UDC_QUEUE_CNAK(&dev->ep[tmp], dev->ep[tmp].num);
+		}
+	}
+	/* ...	and ep0out */
+	if (cnak_pending & (1 << UDC_EP0OUT_IX)) {
+		DBG(dev, "CNAK pending for ep%d\n", UDC_EP0OUT_IX);
+		/* clear NAK by writing CNAK */
+		reg = readl(&dev->ep[UDC_EP0OUT_IX].regs->ctl);
+		reg |= AMD_BIT(UDC_EPCTL_CNAK);
+		writel(reg, &dev->ep[UDC_EP0OUT_IX].regs->ctl);
+		dev->ep[UDC_EP0OUT_IX].naking = 0;
+		UDC_QUEUE_CNAK(&dev->ep[UDC_EP0OUT_IX],
+				dev->ep[UDC_EP0OUT_IX].num);
+	}
+}
+
+/* Enabling RX DMA after setup packet */
+static void udc_ep0_set_rde(struct udc *dev)
+{
+	if (use_dma) {
+		/*
+		 * only enable RXDMA when no data endpoint enabled
+		 * or data is queued
+		 */
+		if (!dev->data_ep_enabled || dev->data_ep_queued) {
+			udc_set_rde(dev);
+		} else {
+			/*
+			 * setup timer for enabling RDE (to not enable
+			 * RXFIFO DMA for data endpoints to early)
+			 */
+			if (set_rde != 0 && !timer_pending(&udc_timer)) {
+				udc_timer.expires =
+					jiffies + HZ/UDC_RDE_TIMER_DIV;
+				set_rde = 1;
+				if (!stop_timer)
+					add_timer(&udc_timer);
+			}
+		}
+	}
+}
+
+
+/* Interrupt handler for data OUT traffic */
+static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
+{
+	irqreturn_t		ret_val = IRQ_NONE;
+	u32			tmp;
+	struct udc_ep		*ep;
+	struct udc_request	*req;
+	unsigned int		count;
+	struct udc_data_dma	*td = NULL;
+	unsigned		dma_done;
+
+	VDBG(dev, "ep%d irq\n", ep_ix);
+	ep = &dev->ep[ep_ix];
+
+	tmp = readl(&ep->regs->sts);
+	if (use_dma) {
+		/* BNA event ? */
+		if (tmp & AMD_BIT(UDC_EPSTS_BNA)) {
+			DBG(dev, "BNA ep%dout occurred - DESPTR = %x\n",
+					ep->num, readl(&ep->regs->desptr));
+			/* clear BNA */
+			writel(tmp | AMD_BIT(UDC_EPSTS_BNA), &ep->regs->sts);
+			if (!ep->cancel_transfer)
+				ep->bna_occurred = 1;
+			else
+				ep->cancel_transfer = 0;
+			ret_val = IRQ_HANDLED;
+			goto finished;
+		}
+	}
+	/* HE event ? */
+	if (tmp & AMD_BIT(UDC_EPSTS_HE)) {
+		dev_err(dev->dev, "HE ep%dout occurred\n", ep->num);
+
+		/* clear HE */
+		writel(tmp | AMD_BIT(UDC_EPSTS_HE), &ep->regs->sts);
+		ret_val = IRQ_HANDLED;
+		goto finished;
+	}
+
+	if (!list_empty(&ep->queue)) {
+
+		/* next request */
+		req = list_entry(ep->queue.next,
+			struct udc_request, queue);
+	} else {
+		req = NULL;
+		udc_rxfifo_pending = 1;
+	}
+	VDBG(dev, "req = %p\n", req);
+	/* fifo mode */
+	if (!use_dma) {
+
+		/* read fifo */
+		if (req && udc_rxfifo_read(ep, req)) {
+			ret_val = IRQ_HANDLED;
+
+			/* finish */
+			complete_req(ep, req, 0);
+			/* next request */
+			if (!list_empty(&ep->queue) && !ep->halted) {
+				req = list_entry(ep->queue.next,
+					struct udc_request, queue);
+			} else
+				req = NULL;
+		}
+
+	/* DMA */
+	} else if (!ep->cancel_transfer && req) {
+		ret_val = IRQ_HANDLED;
+
+		/* check for DMA done */
+		if (!use_dma_ppb) {
+			dma_done = AMD_GETBITS(req->td_data->status,
+						UDC_DMA_OUT_STS_BS);
+		/* packet per buffer mode - rx bytes */
+		} else {
+			/*
+			 * if BNA occurred then recover desc. from
+			 * BNA dummy desc.
+			 */
+			if (ep->bna_occurred) {
+				VDBG(dev, "Recover desc. from BNA dummy\n");
+				memcpy(req->td_data, ep->bna_dummy_req->td_data,
+						sizeof(struct udc_data_dma));
+				ep->bna_occurred = 0;
+				udc_init_bna_dummy(ep->req);
+			}
+			td = udc_get_last_dma_desc(req);
+			dma_done = AMD_GETBITS(td->status, UDC_DMA_OUT_STS_BS);
+		}
+		if (dma_done == UDC_DMA_OUT_STS_BS_DMA_DONE) {
+			/* buffer fill mode - rx bytes */
+			if (!use_dma_ppb) {
+				/* received number bytes */
+				count = AMD_GETBITS(req->td_data->status,
+						UDC_DMA_OUT_STS_RXBYTES);
+				VDBG(dev, "rx bytes=%u\n", count);
+			/* packet per buffer mode - rx bytes */
+			} else {
+				VDBG(dev, "req->td_data=%p\n", req->td_data);
+				VDBG(dev, "last desc = %p\n", td);
+				/* received number bytes */
+				if (use_dma_ppb_du) {
+					/* every desc. counts bytes */
+					count = udc_get_ppbdu_rxbytes(req);
+				} else {
+					/* last desc. counts bytes */
+					count = AMD_GETBITS(td->status,
+						UDC_DMA_OUT_STS_RXBYTES);
+					if (!count && req->req.length
+						== UDC_DMA_MAXPACKET) {
+						/*
+						 * on 64k packets the RXBYTES
+						 * field is zero
+						 */
+						count = UDC_DMA_MAXPACKET;
+					}
+				}
+				VDBG(dev, "last desc rx bytes=%u\n", count);
+			}
+
+			tmp = req->req.length - req->req.actual;
+			if (count > tmp) {
+				if ((tmp % ep->ep.maxpacket) != 0) {
+					DBG(dev, "%s: rx %db, space=%db\n",
+						ep->ep.name, count, tmp);
+					req->req.status = -EOVERFLOW;
+				}
+				count = tmp;
+			}
+			req->req.actual += count;
+			req->dma_going = 0;
+			/* complete request */
+			complete_req(ep, req, 0);
+
+			/* next request */
+			if (!list_empty(&ep->queue) && !ep->halted) {
+				req = list_entry(ep->queue.next,
+					struct udc_request,
+					queue);
+				/*
+				 * DMA may be already started by udc_queue()
+				 * called by gadget drivers completion
+				 * routine. This happens when queue
+				 * holds one request only.
+				 */
+				if (req->dma_going == 0) {
+					/* next dma */
+					if (prep_dma(ep, req, GFP_ATOMIC) != 0)
+						goto finished;
+					/* write desc pointer */
+					writel(req->td_phys,
+						&ep->regs->desptr);
+					req->dma_going = 1;
+					/* enable DMA */
+					udc_set_rde(dev);
+				}
+			} else {
+				/*
+				 * implant BNA dummy descriptor to allow
+				 * RXFIFO opening by RDE
+				 */
+				if (ep->bna_dummy_req) {
+					/* write desc pointer */
+					writel(ep->bna_dummy_req->td_phys,
+						&ep->regs->desptr);
+					ep->bna_occurred = 0;
+				}
+
+				/*
+				 * schedule timer for setting RDE if queue
+				 * remains empty to allow ep0 packets pass
+				 * through
+				 */
+				if (set_rde != 0
+						&& !timer_pending(&udc_timer)) {
+					udc_timer.expires =
+						jiffies
+						+ HZ*UDC_RDE_TIMER_SECONDS;
+					set_rde = 1;
+					if (!stop_timer)
+						add_timer(&udc_timer);
+				}
+				if (ep->num != UDC_EP0OUT_IX)
+					dev->data_ep_queued = 0;
+			}
+
+		} else {
+			/*
+			* RX DMA must be reenabled for each desc in PPBDU mode
+			* and must be enabled for PPBNDU mode in case of BNA
+			*/
+			udc_set_rde(dev);
+		}
+
+	} else if (ep->cancel_transfer) {
+		ret_val = IRQ_HANDLED;
+		ep->cancel_transfer = 0;
+	}
+
+	/* check pending CNAKS */
+	if (cnak_pending) {
+		/* CNAk processing when rxfifo empty only */
+		if (readl(&dev->regs->sts) & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY))
+			udc_process_cnak_queue(dev);
+	}
+
+	/* clear OUT bits in ep status */
+	writel(UDC_EPSTS_OUT_CLEAR, &ep->regs->sts);
+finished:
+	return ret_val;
+}
+
+/* Interrupt handler for data IN traffic */
+static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
+{
+	irqreturn_t ret_val = IRQ_NONE;
+	u32 tmp;
+	u32 epsts;
+	struct udc_ep *ep;
+	struct udc_request *req;
+	struct udc_data_dma *td;
+	unsigned len;
+
+	ep = &dev->ep[ep_ix];
+
+	epsts = readl(&ep->regs->sts);
+	if (use_dma) {
+		/* BNA ? */
+		if (epsts & AMD_BIT(UDC_EPSTS_BNA)) {
+			dev_err(dev->dev,
+				"BNA ep%din occurred - DESPTR = %08lx\n",
+				ep->num,
+				(unsigned long) readl(&ep->regs->desptr));
+
+			/* clear BNA */
+			writel(epsts, &ep->regs->sts);
+			ret_val = IRQ_HANDLED;
+			goto finished;
+		}
+	}
+	/* HE event ? */
+	if (epsts & AMD_BIT(UDC_EPSTS_HE)) {
+		dev_err(dev->dev,
+			"HE ep%dn occurred - DESPTR = %08lx\n",
+			ep->num, (unsigned long) readl(&ep->regs->desptr));
+
+		/* clear HE */
+		writel(epsts | AMD_BIT(UDC_EPSTS_HE), &ep->regs->sts);
+		ret_val = IRQ_HANDLED;
+		goto finished;
+	}
+
+	/* DMA completion */
+	if (epsts & AMD_BIT(UDC_EPSTS_TDC)) {
+		VDBG(dev, "TDC set- completion\n");
+		ret_val = IRQ_HANDLED;
+		if (!ep->cancel_transfer && !list_empty(&ep->queue)) {
+			req = list_entry(ep->queue.next,
+					struct udc_request, queue);
+			/*
+			 * length bytes transferred
+			 * check dma done of last desc. in PPBDU mode
+			 */
+			if (use_dma_ppb_du) {
+				td = udc_get_last_dma_desc(req);
+				if (td)
+					req->req.actual = req->req.length;
+			} else {
+				/* assume all bytes transferred */
+				req->req.actual = req->req.length;
+			}
+
+			if (req->req.actual == req->req.length) {
+				/* complete req */
+				complete_req(ep, req, 0);
+				req->dma_going = 0;
+				/* further request available ? */
+				if (list_empty(&ep->queue)) {
+					/* disable interrupt */
+					tmp = readl(&dev->regs->ep_irqmsk);
+					tmp |= AMD_BIT(ep->num);
+					writel(tmp, &dev->regs->ep_irqmsk);
+				}
+			}
+		}
+		ep->cancel_transfer = 0;
+
+	}
+	/*
+	 * status reg has IN bit set and TDC not set (if TDC was handled,
+	 * IN must not be handled (UDC defect) ?
+	 */
+	if ((epsts & AMD_BIT(UDC_EPSTS_IN))
+			&& !(epsts & AMD_BIT(UDC_EPSTS_TDC))) {
+		ret_val = IRQ_HANDLED;
+		if (!list_empty(&ep->queue)) {
+			/* next request */
+			req = list_entry(ep->queue.next,
+					struct udc_request, queue);
+			/* FIFO mode */
+			if (!use_dma) {
+				/* write fifo */
+				udc_txfifo_write(ep, &req->req);
+				len = req->req.length - req->req.actual;
+				if (len > ep->ep.maxpacket)
+					len = ep->ep.maxpacket;
+				req->req.actual += len;
+				if (req->req.actual == req->req.length
+					|| (len != ep->ep.maxpacket)) {
+					/* complete req */
+					complete_req(ep, req, 0);
+				}
+			/* DMA */
+			} else if (req && !req->dma_going) {
+				VDBG(dev, "IN DMA : req=%p req->td_data=%p\n",
+					req, req->td_data);
+				if (req->td_data) {
+
+					req->dma_going = 1;
+
+					/*
+					 * unset L bit of first desc.
+					 * for chain
+					 */
+					if (use_dma_ppb && req->req.length >
+							ep->ep.maxpacket) {
+						req->td_data->status &=
+							AMD_CLEAR_BIT(
+							UDC_DMA_IN_STS_L);
+					}
+
+					/* write desc pointer */
+					writel(req->td_phys, &ep->regs->desptr);
+
+					/* set HOST READY */
+					req->td_data->status =
+						AMD_ADDBITS(
+						req->td_data->status,
+						UDC_DMA_IN_STS_BS_HOST_READY,
+						UDC_DMA_IN_STS_BS);
+
+					/* set poll demand bit */
+					tmp = readl(&ep->regs->ctl);
+					tmp |= AMD_BIT(UDC_EPCTL_P);
+					writel(tmp, &ep->regs->ctl);
+				}
+			}
+
+		} else if (!use_dma && ep->in) {
+			/* disable interrupt */
+			tmp = readl(
+				&dev->regs->ep_irqmsk);
+			tmp |= AMD_BIT(ep->num);
+			writel(tmp,
+				&dev->regs->ep_irqmsk);
+		}
+	}
+	/* clear status bits */
+	writel(epsts, &ep->regs->sts);
+
+finished:
+	return ret_val;
+
+}
+
+/* Interrupt handler for Control OUT traffic */
+static irqreturn_t udc_control_out_isr(struct udc *dev)
+__releases(dev->lock)
+__acquires(dev->lock)
+{
+	irqreturn_t ret_val = IRQ_NONE;
+	u32 tmp;
+	int setup_supported;
+	u32 count;
+	int set = 0;
+	struct udc_ep	*ep;
+	struct udc_ep	*ep_tmp;
+
+	ep = &dev->ep[UDC_EP0OUT_IX];
+
+	/* clear irq */
+	writel(AMD_BIT(UDC_EPINT_OUT_EP0), &dev->regs->ep_irqsts);
+
+	tmp = readl(&dev->ep[UDC_EP0OUT_IX].regs->sts);
+	/* check BNA and clear if set */
+	if (tmp & AMD_BIT(UDC_EPSTS_BNA)) {
+		VDBG(dev, "ep0: BNA set\n");
+		writel(AMD_BIT(UDC_EPSTS_BNA),
+			&dev->ep[UDC_EP0OUT_IX].regs->sts);
+		ep->bna_occurred = 1;
+		ret_val = IRQ_HANDLED;
+		goto finished;
+	}
+
+	/* type of data: SETUP or DATA 0 bytes */
+	tmp = AMD_GETBITS(tmp, UDC_EPSTS_OUT);
+	VDBG(dev, "data_typ = %x\n", tmp);
+
+	/* setup data */
+	if (tmp == UDC_EPSTS_OUT_SETUP) {
+		ret_val = IRQ_HANDLED;
+
+		ep->dev->stall_ep0in = 0;
+		dev->waiting_zlp_ack_ep0in = 0;
+
+		/* set NAK for EP0_IN */
+		tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->ctl);
+		tmp |= AMD_BIT(UDC_EPCTL_SNAK);
+		writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl);
+		dev->ep[UDC_EP0IN_IX].naking = 1;
+		/* get setup data */
+		if (use_dma) {
+
+			/* clear OUT bits in ep status */
+			writel(UDC_EPSTS_OUT_CLEAR,
+				&dev->ep[UDC_EP0OUT_IX].regs->sts);
+
+			setup_data.data[0] =
+				dev->ep[UDC_EP0OUT_IX].td_stp->data12;
+			setup_data.data[1] =
+				dev->ep[UDC_EP0OUT_IX].td_stp->data34;
+			/* set HOST READY */
+			dev->ep[UDC_EP0OUT_IX].td_stp->status =
+					UDC_DMA_STP_STS_BS_HOST_READY;
+		} else {
+			/* read fifo */
+			udc_rxfifo_read_dwords(dev, setup_data.data, 2);
+		}
+
+		/* determine direction of control data */
+		if ((setup_data.request.bRequestType & USB_DIR_IN) != 0) {
+			dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IX].ep;
+			/* enable RDE */
+			udc_ep0_set_rde(dev);
+			set = 0;
+		} else {
+			dev->gadget.ep0 = &dev->ep[UDC_EP0OUT_IX].ep;
+			/*
+			 * implant BNA dummy descriptor to allow RXFIFO opening
+			 * by RDE
+			 */
+			if (ep->bna_dummy_req) {
+				/* write desc pointer */
+				writel(ep->bna_dummy_req->td_phys,
+					&dev->ep[UDC_EP0OUT_IX].regs->desptr);
+				ep->bna_occurred = 0;
+			}
+
+			set = 1;
+			dev->ep[UDC_EP0OUT_IX].naking = 1;
+			/*
+			 * setup timer for enabling RDE (to not enable
+			 * RXFIFO DMA for data to early)
+			 */
+			set_rde = 1;
+			if (!timer_pending(&udc_timer)) {
+				udc_timer.expires = jiffies +
+							HZ/UDC_RDE_TIMER_DIV;
+				if (!stop_timer)
+					add_timer(&udc_timer);
+			}
+		}
+
+		/*
+		 * mass storage reset must be processed here because
+		 * next packet may be a CLEAR_FEATURE HALT which would not
+		 * clear the stall bit when no STALL handshake was received
+		 * before (autostall can cause this)
+		 */
+		if (setup_data.data[0] == UDC_MSCRES_DWORD0
+				&& setup_data.data[1] == UDC_MSCRES_DWORD1) {
+			DBG(dev, "MSC Reset\n");
+			/*
+			 * clear stall bits
+			 * only one IN and OUT endpoints are handled
+			 */
+			ep_tmp = &udc->ep[UDC_EPIN_IX];
+			udc_set_halt(&ep_tmp->ep, 0);
+			ep_tmp = &udc->ep[UDC_EPOUT_IX];
+			udc_set_halt(&ep_tmp->ep, 0);
+		}
+
+		/* call gadget with setup data received */
+		spin_unlock(&dev->lock);
+		setup_supported = dev->driver->setup(&dev->gadget,
+						&setup_data.request);
+		spin_lock(&dev->lock);
+
+		tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->ctl);
+		/* ep0 in returns data (not zlp) on IN phase */
+		if (setup_supported >= 0 && setup_supported <
+				UDC_EP0IN_MAXPACKET) {
+			/* clear NAK by writing CNAK in EP0_IN */
+			tmp |= AMD_BIT(UDC_EPCTL_CNAK);
+			writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl);
+			dev->ep[UDC_EP0IN_IX].naking = 0;
+			UDC_QUEUE_CNAK(&dev->ep[UDC_EP0IN_IX], UDC_EP0IN_IX);
+
+		/* if unsupported request then stall */
+		} else if (setup_supported < 0) {
+			tmp |= AMD_BIT(UDC_EPCTL_S);
+			writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl);
+		} else
+			dev->waiting_zlp_ack_ep0in = 1;
+
+
+		/* clear NAK by writing CNAK in EP0_OUT */
+		if (!set) {
+			tmp = readl(&dev->ep[UDC_EP0OUT_IX].regs->ctl);
+			tmp |= AMD_BIT(UDC_EPCTL_CNAK);
+			writel(tmp, &dev->ep[UDC_EP0OUT_IX].regs->ctl);
+			dev->ep[UDC_EP0OUT_IX].naking = 0;
+			UDC_QUEUE_CNAK(&dev->ep[UDC_EP0OUT_IX], UDC_EP0OUT_IX);
+		}
+
+		if (!use_dma) {
+			/* clear OUT bits in ep status */
+			writel(UDC_EPSTS_OUT_CLEAR,
+				&dev->ep[UDC_EP0OUT_IX].regs->sts);
+		}
+
+	/* data packet 0 bytes */
+	} else if (tmp == UDC_EPSTS_OUT_DATA) {
+		/* clear OUT bits in ep status */
+		writel(UDC_EPSTS_OUT_CLEAR, &dev->ep[UDC_EP0OUT_IX].regs->sts);
+
+		/* get setup data: only 0 packet */
+		if (use_dma) {
+			/* no req if 0 packet, just reactivate */
+			if (list_empty(&dev->ep[UDC_EP0OUT_IX].queue)) {
+				VDBG(dev, "ZLP\n");
+
+				/* set HOST READY */
+				dev->ep[UDC_EP0OUT_IX].td->status =
+					AMD_ADDBITS(
+					dev->ep[UDC_EP0OUT_IX].td->status,
+					UDC_DMA_OUT_STS_BS_HOST_READY,
+					UDC_DMA_OUT_STS_BS);
+				/* enable RDE */
+				udc_ep0_set_rde(dev);
+				ret_val = IRQ_HANDLED;
+
+			} else {
+				/* control write */
+				ret_val |= udc_data_out_isr(dev, UDC_EP0OUT_IX);
+				/* re-program desc. pointer for possible ZLPs */
+				writel(dev->ep[UDC_EP0OUT_IX].td_phys,
+					&dev->ep[UDC_EP0OUT_IX].regs->desptr);
+				/* enable RDE */
+				udc_ep0_set_rde(dev);
+			}
+		} else {
+
+			/* received number bytes */
+			count = readl(&dev->ep[UDC_EP0OUT_IX].regs->sts);
+			count = AMD_GETBITS(count, UDC_EPSTS_RX_PKT_SIZE);
+			/* out data for fifo mode not working */
+			count = 0;
+
+			/* 0 packet or real data ? */
+			if (count != 0) {
+				ret_val |= udc_data_out_isr(dev, UDC_EP0OUT_IX);
+			} else {
+				/* dummy read confirm */
+				readl(&dev->ep[UDC_EP0OUT_IX].regs->confirm);
+				ret_val = IRQ_HANDLED;
+			}
+		}
+	}
+
+	/* check pending CNAKS */
+	if (cnak_pending) {
+		/* CNAk processing when rxfifo empty only */
+		if (readl(&dev->regs->sts) & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY))
+			udc_process_cnak_queue(dev);
+	}
+
+finished:
+	return ret_val;
+}
+
+/* Interrupt handler for Control IN traffic */
+static irqreturn_t udc_control_in_isr(struct udc *dev)
+{
+	irqreturn_t ret_val = IRQ_NONE;
+	u32 tmp;
+	struct udc_ep *ep;
+	struct udc_request *req;
+	unsigned len;
+
+	ep = &dev->ep[UDC_EP0IN_IX];
+
+	/* clear irq */
+	writel(AMD_BIT(UDC_EPINT_IN_EP0), &dev->regs->ep_irqsts);
+
+	tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->sts);
+	/* DMA completion */
+	if (tmp & AMD_BIT(UDC_EPSTS_TDC)) {
+		VDBG(dev, "isr: TDC clear\n");
+		ret_val = IRQ_HANDLED;
+
+		/* clear TDC bit */
+		writel(AMD_BIT(UDC_EPSTS_TDC),
+				&dev->ep[UDC_EP0IN_IX].regs->sts);
+
+	/* status reg has IN bit set ? */
+	} else if (tmp & AMD_BIT(UDC_EPSTS_IN)) {
+		ret_val = IRQ_HANDLED;
+
+		if (ep->dma) {
+			/* clear IN bit */
+			writel(AMD_BIT(UDC_EPSTS_IN),
+				&dev->ep[UDC_EP0IN_IX].regs->sts);
+		}
+		if (dev->stall_ep0in) {
+			DBG(dev, "stall ep0in\n");
+			/* halt ep0in */
+			tmp = readl(&ep->regs->ctl);
+			tmp |= AMD_BIT(UDC_EPCTL_S);
+			writel(tmp, &ep->regs->ctl);
+		} else {
+			if (!list_empty(&ep->queue)) {
+				/* next request */
+				req = list_entry(ep->queue.next,
+						struct udc_request, queue);
+
+				if (ep->dma) {
+					/* write desc pointer */
+					writel(req->td_phys, &ep->regs->desptr);
+					/* set HOST READY */
+					req->td_data->status =
+						AMD_ADDBITS(
+						req->td_data->status,
+						UDC_DMA_STP_STS_BS_HOST_READY,
+						UDC_DMA_STP_STS_BS);
+
+					/* set poll demand bit */
+					tmp =
+					readl(&dev->ep[UDC_EP0IN_IX].regs->ctl);
+					tmp |= AMD_BIT(UDC_EPCTL_P);
+					writel(tmp,
+					&dev->ep[UDC_EP0IN_IX].regs->ctl);
+
+					/* all bytes will be transferred */
+					req->req.actual = req->req.length;
+
+					/* complete req */
+					complete_req(ep, req, 0);
+
+				} else {
+					/* write fifo */
+					udc_txfifo_write(ep, &req->req);
+
+					/* lengh bytes transferred */
+					len = req->req.length - req->req.actual;
+					if (len > ep->ep.maxpacket)
+						len = ep->ep.maxpacket;
+
+					req->req.actual += len;
+					if (req->req.actual == req->req.length
+						|| (len != ep->ep.maxpacket)) {
+						/* complete req */
+						complete_req(ep, req, 0);
+					}
+				}
+
+			}
+		}
+		ep->halted = 0;
+		dev->stall_ep0in = 0;
+		if (!ep->dma) {
+			/* clear IN bit */
+			writel(AMD_BIT(UDC_EPSTS_IN),
+				&dev->ep[UDC_EP0IN_IX].regs->sts);
+		}
+	}
+
+	return ret_val;
+}
+
+
+/* Interrupt handler for global device events */
+static irqreturn_t udc_dev_isr(struct udc *dev, u32 dev_irq)
+__releases(dev->lock)
+__acquires(dev->lock)
+{
+	irqreturn_t ret_val = IRQ_NONE;
+	u32 tmp;
+	u32 cfg;
+	struct udc_ep *ep;
+	u16 i;
+	u8 udc_csr_epix;
+
+	/* SET_CONFIG irq ? */
+	if (dev_irq & AMD_BIT(UDC_DEVINT_SC)) {
+		ret_val = IRQ_HANDLED;
+
+		/* read config value */
+		tmp = readl(&dev->regs->sts);
+		cfg = AMD_GETBITS(tmp, UDC_DEVSTS_CFG);
+		DBG(dev, "SET_CONFIG interrupt: config=%d\n", cfg);
+		dev->cur_config = cfg;
+		dev->set_cfg_not_acked = 1;
+
+		/* make usb request for gadget driver */
+		memset(&setup_data, 0 , sizeof(union udc_setup_data));
+		setup_data.request.bRequest = USB_REQ_SET_CONFIGURATION;
+		setup_data.request.wValue = cpu_to_le16(dev->cur_config);
+
+		/* programm the NE registers */
+		for (i = 0; i < UDC_EP_NUM; i++) {
+			ep = &dev->ep[i];
+			if (ep->in) {
+
+				/* ep ix in UDC CSR register space */
+				udc_csr_epix = ep->num;
+
+
+			/* OUT ep */
+			} else {
+				/* ep ix in UDC CSR register space */
+				udc_csr_epix = ep->num - UDC_CSR_EP_OUT_IX_OFS;
+			}
+
+			tmp = readl(&dev->csr->ne[udc_csr_epix]);
+			/* ep cfg */
+			tmp = AMD_ADDBITS(tmp, ep->dev->cur_config,
+						UDC_CSR_NE_CFG);
+			/* write reg */
+			writel(tmp, &dev->csr->ne[udc_csr_epix]);
+
+			/* clear stall bits */
+			ep->halted = 0;
+			tmp = readl(&ep->regs->ctl);
+			tmp = tmp & AMD_CLEAR_BIT(UDC_EPCTL_S);
+			writel(tmp, &ep->regs->ctl);
+		}
+		/* call gadget zero with setup data received */
+		spin_unlock(&dev->lock);
+		tmp = dev->driver->setup(&dev->gadget, &setup_data.request);
+		spin_lock(&dev->lock);
+
+	} /* SET_INTERFACE ? */
+	if (dev_irq & AMD_BIT(UDC_DEVINT_SI)) {
+		ret_val = IRQ_HANDLED;
+
+		dev->set_cfg_not_acked = 1;
+		/* read interface and alt setting values */
+		tmp = readl(&dev->regs->sts);
+		dev->cur_alt = AMD_GETBITS(tmp, UDC_DEVSTS_ALT);
+		dev->cur_intf = AMD_GETBITS(tmp, UDC_DEVSTS_INTF);
+
+		/* make usb request for gadget driver */
+		memset(&setup_data, 0 , sizeof(union udc_setup_data));
+		setup_data.request.bRequest = USB_REQ_SET_INTERFACE;
+		setup_data.request.bRequestType = USB_RECIP_INTERFACE;
+		setup_data.request.wValue = cpu_to_le16(dev->cur_alt);
+		setup_data.request.wIndex = cpu_to_le16(dev->cur_intf);
+
+		DBG(dev, "SET_INTERFACE interrupt: alt=%d intf=%d\n",
+				dev->cur_alt, dev->cur_intf);
+
+		/* programm the NE registers */
+		for (i = 0; i < UDC_EP_NUM; i++) {
+			ep = &dev->ep[i];
+			if (ep->in) {
+
+				/* ep ix in UDC CSR register space */
+				udc_csr_epix = ep->num;
+
+
+			/* OUT ep */
+			} else {
+				/* ep ix in UDC CSR register space */
+				udc_csr_epix = ep->num - UDC_CSR_EP_OUT_IX_OFS;
+			}
+
+			/* UDC CSR reg */
+			/* set ep values */
+			tmp = readl(&dev->csr->ne[udc_csr_epix]);
+			/* ep interface */
+			tmp = AMD_ADDBITS(tmp, ep->dev->cur_intf,
+						UDC_CSR_NE_INTF);
+			/* tmp = AMD_ADDBITS(tmp, 2, UDC_CSR_NE_INTF); */
+			/* ep alt */
+			tmp = AMD_ADDBITS(tmp, ep->dev->cur_alt,
+						UDC_CSR_NE_ALT);
+			/* write reg */
+			writel(tmp, &dev->csr->ne[udc_csr_epix]);
+
+			/* clear stall bits */
+			ep->halted = 0;
+			tmp = readl(&ep->regs->ctl);
+			tmp = tmp & AMD_CLEAR_BIT(UDC_EPCTL_S);
+			writel(tmp, &ep->regs->ctl);
+		}
+
+		/* call gadget zero with setup data received */
+		spin_unlock(&dev->lock);
+		tmp = dev->driver->setup(&dev->gadget, &setup_data.request);
+		spin_lock(&dev->lock);
+
+	} /* USB reset */
+	if (dev_irq & AMD_BIT(UDC_DEVINT_UR)) {
+		DBG(dev, "USB Reset interrupt\n");
+		ret_val = IRQ_HANDLED;
+
+		/* allow soft reset when suspend occurs */
+		soft_reset_occured = 0;
+
+		dev->waiting_zlp_ack_ep0in = 0;
+		dev->set_cfg_not_acked = 0;
+
+		/* mask not needed interrupts */
+		udc_mask_unused_interrupts(dev);
+
+		/* call gadget to resume and reset configs etc. */
+		spin_unlock(&dev->lock);
+		if (dev->sys_suspended && dev->driver->resume) {
+			dev->driver->resume(&dev->gadget);
+			dev->sys_suspended = 0;
+		}
+		usb_gadget_udc_reset(&dev->gadget, dev->driver);
+		spin_lock(&dev->lock);
+
+		/* disable ep0 to empty req queue */
+		empty_req_queue(&dev->ep[UDC_EP0IN_IX]);
+		ep_init(dev->regs, &dev->ep[UDC_EP0IN_IX]);
+
+		/* soft reset when rxfifo not empty */
+		tmp = readl(&dev->regs->sts);
+		if (!(tmp & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY))
+				&& !soft_reset_after_usbreset_occured) {
+			udc_soft_reset(dev);
+			soft_reset_after_usbreset_occured++;
+		}
+
+		/*
+		 * DMA reset to kill potential old DMA hw hang,
+		 * POLL bit is already reset by ep_init() through
+		 * disconnect()
+		 */
+		DBG(dev, "DMA machine reset\n");
+		tmp = readl(&dev->regs->cfg);
+		writel(tmp | AMD_BIT(UDC_DEVCFG_DMARST), &dev->regs->cfg);
+		writel(tmp, &dev->regs->cfg);
+
+		/* put into initial config */
+		udc_basic_init(dev);
+
+		/* enable device setup interrupts */
+		udc_enable_dev_setup_interrupts(dev);
+
+		/* enable suspend interrupt */
+		tmp = readl(&dev->regs->irqmsk);
+		tmp &= AMD_UNMASK_BIT(UDC_DEVINT_US);
+		writel(tmp, &dev->regs->irqmsk);
+
+	} /* USB suspend */
+	if (dev_irq & AMD_BIT(UDC_DEVINT_US)) {
+		DBG(dev, "USB Suspend interrupt\n");
+		ret_val = IRQ_HANDLED;
+		if (dev->driver->suspend) {
+			spin_unlock(&dev->lock);
+			dev->sys_suspended = 1;
+			dev->driver->suspend(&dev->gadget);
+			spin_lock(&dev->lock);
+		}
+	} /* new speed ? */
+	if (dev_irq & AMD_BIT(UDC_DEVINT_ENUM)) {
+		DBG(dev, "ENUM interrupt\n");
+		ret_val = IRQ_HANDLED;
+		soft_reset_after_usbreset_occured = 0;
+
+		/* disable ep0 to empty req queue */
+		empty_req_queue(&dev->ep[UDC_EP0IN_IX]);
+		ep_init(dev->regs, &dev->ep[UDC_EP0IN_IX]);
+
+		/* link up all endpoints */
+		udc_setup_endpoints(dev);
+		dev_info(dev->dev, "Connect: %s\n",
+			 usb_speed_string(dev->gadget.speed));
+
+		/* init ep 0 */
+		activate_control_endpoints(dev);
+
+		/* enable ep0 interrupts */
+		udc_enable_ep0_interrupts(dev);
+	}
+	/* session valid change interrupt */
+	if (dev_irq & AMD_BIT(UDC_DEVINT_SVC)) {
+		DBG(dev, "USB SVC interrupt\n");
+		ret_val = IRQ_HANDLED;
+
+		/* check that session is not valid to detect disconnect */
+		tmp = readl(&dev->regs->sts);
+		if (!(tmp & AMD_BIT(UDC_DEVSTS_SESSVLD))) {
+			/* disable suspend interrupt */
+			tmp = readl(&dev->regs->irqmsk);
+			tmp |= AMD_BIT(UDC_DEVINT_US);
+			writel(tmp, &dev->regs->irqmsk);
+			DBG(dev, "USB Disconnect (session valid low)\n");
+			/* cleanup on disconnect */
+			usb_disconnect(udc);
+		}
+
+	}
+
+	return ret_val;
+}
+
+/* Interrupt Service Routine, see Linux Kernel Doc for parameters */
+irqreturn_t udc_irq(int irq, void *pdev)
+{
+	struct udc *dev = pdev;
+	u32 reg;
+	u16 i;
+	u32 ep_irq;
+	irqreturn_t ret_val = IRQ_NONE;
+
+	spin_lock(&dev->lock);
+
+	/* check for ep irq */
+	reg = readl(&dev->regs->ep_irqsts);
+	if (reg) {
+		if (reg & AMD_BIT(UDC_EPINT_OUT_EP0))
+			ret_val |= udc_control_out_isr(dev);
+		if (reg & AMD_BIT(UDC_EPINT_IN_EP0))
+			ret_val |= udc_control_in_isr(dev);
+
+		/*
+		 * data endpoint
+		 * iterate ep's
+		 */
+		for (i = 1; i < UDC_EP_NUM; i++) {
+			ep_irq = 1 << i;
+			if (!(reg & ep_irq) || i == UDC_EPINT_OUT_EP0)
+				continue;
+
+			/* clear irq status */
+			writel(ep_irq, &dev->regs->ep_irqsts);
+
+			/* irq for out ep ? */
+			if (i > UDC_EPIN_NUM)
+				ret_val |= udc_data_out_isr(dev, i);
+			else
+				ret_val |= udc_data_in_isr(dev, i);
+		}
+
+	}
+
+
+	/* check for dev irq */
+	reg = readl(&dev->regs->irqsts);
+	if (reg) {
+		/* clear irq */
+		writel(reg, &dev->regs->irqsts);
+		ret_val |= udc_dev_isr(dev, reg);
+	}
+
+
+	spin_unlock(&dev->lock);
+	return ret_val;
+}
+EXPORT_SYMBOL_GPL(udc_irq);
+
+/* Tears down device */
+void gadget_release(struct device *pdev)
+{
+	struct amd5536udc *dev = dev_get_drvdata(pdev);
+	kfree(dev);
+}
+EXPORT_SYMBOL_GPL(gadget_release);
+
+/* Cleanup on device remove */
+void udc_remove(struct udc *dev)
+{
+	/* remove timer */
+	stop_timer++;
+	if (timer_pending(&udc_timer))
+		wait_for_completion(&on_exit);
+	del_timer_sync(&udc_timer);
+	/* remove pollstall timer */
+	stop_pollstall_timer++;
+	if (timer_pending(&udc_pollstall_timer))
+		wait_for_completion(&on_pollstall_exit);
+	del_timer_sync(&udc_pollstall_timer);
+	udc = NULL;
+}
+EXPORT_SYMBOL_GPL(udc_remove);
+
+/* free all the dma pools */
+void free_dma_pools(struct udc *dev)
+{
+	dma_pool_free(dev->stp_requests, dev->ep[UDC_EP0OUT_IX].td,
+		      dev->ep[UDC_EP0OUT_IX].td_phys);
+	dma_pool_free(dev->stp_requests, dev->ep[UDC_EP0OUT_IX].td_stp,
+		      dev->ep[UDC_EP0OUT_IX].td_stp_dma);
+	dma_pool_destroy(dev->stp_requests);
+	dma_pool_destroy(dev->data_requests);
+}
+EXPORT_SYMBOL_GPL(free_dma_pools);
+
+/* create dma pools on init */
+int init_dma_pools(struct udc *dev)
+{
+	struct udc_stp_dma	*td_stp;
+	struct udc_data_dma	*td_data;
+	int retval;
+
+	/* consistent DMA mode setting ? */
+	if (use_dma_ppb) {
+		use_dma_bufferfill_mode = 0;
+	} else {
+		use_dma_ppb_du = 0;
+		use_dma_bufferfill_mode = 1;
+	}
+
+	/* DMA setup */
+	dev->data_requests = dma_pool_create("data_requests", dev->dev,
+		sizeof(struct udc_data_dma), 0, 0);
+	if (!dev->data_requests) {
+		DBG(dev, "can't get request data pool\n");
+		return -ENOMEM;
+	}
+
+	/* EP0 in dma regs = dev control regs */
+	dev->ep[UDC_EP0IN_IX].dma = &dev->regs->ctl;
+
+	/* dma desc for setup data */
+	dev->stp_requests = dma_pool_create("setup requests", dev->dev,
+		sizeof(struct udc_stp_dma), 0, 0);
+	if (!dev->stp_requests) {
+		DBG(dev, "can't get stp request pool\n");
+		retval = -ENOMEM;
+		goto err_create_dma_pool;
+	}
+	/* setup */
+	td_stp = dma_pool_alloc(dev->stp_requests, GFP_KERNEL,
+				&dev->ep[UDC_EP0OUT_IX].td_stp_dma);
+	if (!td_stp) {
+		retval = -ENOMEM;
+		goto err_alloc_dma;
+	}
+	dev->ep[UDC_EP0OUT_IX].td_stp = td_stp;
+
+	/* data: 0 packets !? */
+	td_data = dma_pool_alloc(dev->stp_requests, GFP_KERNEL,
+				&dev->ep[UDC_EP0OUT_IX].td_phys);
+	if (!td_data) {
+		retval = -ENOMEM;
+		goto err_alloc_phys;
+	}
+	dev->ep[UDC_EP0OUT_IX].td = td_data;
+	return 0;
+
+err_alloc_phys:
+	dma_pool_free(dev->stp_requests, dev->ep[UDC_EP0OUT_IX].td_stp,
+		      dev->ep[UDC_EP0OUT_IX].td_stp_dma);
+err_alloc_dma:
+	dma_pool_destroy(dev->stp_requests);
+	dev->stp_requests = NULL;
+err_create_dma_pool:
+	dma_pool_destroy(dev->data_requests);
+	dev->data_requests = NULL;
+	return retval;
+}
+EXPORT_SYMBOL_GPL(init_dma_pools);
+
+/* general probe */
+int udc_probe(struct udc *dev)
+{
+	char		tmp[128];
+	u32		reg;
+	int		retval;
+
+	/* device struct setup */
+	dev->gadget.ops = &udc_ops;
+
+	dev_set_name(&dev->gadget.dev, "gadget");
+	dev->gadget.name = name;
+	dev->gadget.max_speed = USB_SPEED_HIGH;
+
+	/* init registers, interrupts, ... */
+	startup_registers(dev);
+
+	dev_info(dev->dev, "%s\n", mod_desc);
+
+	snprintf(tmp, sizeof(tmp), "%d", dev->irq);
+
+	/* Print this device info for AMD chips only*/
+	if (dev->chiprev == UDC_HSA0_REV ||
+	    dev->chiprev == UDC_HSB1_REV) {
+		dev_info(dev->dev, "irq %s, pci mem %08lx, chip rev %02x(Geode5536 %s)\n",
+			 tmp, dev->phys_addr, dev->chiprev,
+			 (dev->chiprev == UDC_HSA0_REV) ?
+			 "A0" : "B1");
+		strcpy(tmp, UDC_DRIVER_VERSION_STRING);
+		if (dev->chiprev == UDC_HSA0_REV) {
+			dev_err(dev->dev, "chip revision is A0; too old\n");
+			retval = -ENODEV;
+			goto finished;
+		}
+		dev_info(dev->dev,
+			 "driver version: %s(for Geode5536 B1)\n", tmp);
+	}
+
+	udc = dev;
+
+	retval = usb_add_gadget_udc_release(udc->dev, &dev->gadget,
+					    gadget_release);
+	if (retval)
+		goto finished;
+
+	/* timer init */
+	timer_setup(&udc_timer, udc_timer_function, 0);
+	timer_setup(&udc_pollstall_timer, udc_pollstall_timer_function, 0);
+
+	/* set SD */
+	reg = readl(&dev->regs->ctl);
+	reg |= AMD_BIT(UDC_DEVCTL_SD);
+	writel(reg, &dev->regs->ctl);
+
+	/* print dev register info */
+	print_regs(dev);
+
+	return 0;
+
+finished:
+	return retval;
+}
+EXPORT_SYMBOL_GPL(udc_probe);
+
+MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION);
+MODULE_AUTHOR("Thomas Dahlmann");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/udc/snps_udc_plat.c b/drivers/usb/gadget/udc/snps_udc_plat.c
new file mode 100644
index 000000000..8bbb89c80
--- /dev/null
+++ b/drivers/usb/gadget/udc/snps_udc_plat.c
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * snps_udc_plat.c - Synopsys UDC Platform Driver
+ *
+ * Copyright (C) 2016 Broadcom
+ */
+
+#include <linux/extcon.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/module.h>
+#include <linux/dmapool.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include "amd5536udc.h"
+
+/* description */
+#define UDC_MOD_DESCRIPTION     "Synopsys UDC platform driver"
+
+static void start_udc(struct udc *udc)
+{
+	if (udc->driver) {
+		dev_info(udc->dev, "Connecting...\n");
+		udc_enable_dev_setup_interrupts(udc);
+		udc_basic_init(udc);
+		udc->connected = 1;
+	}
+}
+
+static void stop_udc(struct udc *udc)
+{
+	int tmp;
+	u32 reg;
+
+	spin_lock(&udc->lock);
+
+	/* Flush the receieve fifo */
+	reg = readl(&udc->regs->ctl);
+	reg |= AMD_BIT(UDC_DEVCTL_SRX_FLUSH);
+	writel(reg, &udc->regs->ctl);
+
+	reg = readl(&udc->regs->ctl);
+	reg &= ~(AMD_BIT(UDC_DEVCTL_SRX_FLUSH));
+	writel(reg, &udc->regs->ctl);
+	dev_dbg(udc->dev, "ep rx queue flushed\n");
+
+	/* Mask interrupts. Required more so when the
+	 * UDC is connected to a DRD phy.
+	 */
+	udc_mask_unused_interrupts(udc);
+
+	/* Disconnect gadget driver */
+	if (udc->driver) {
+		spin_unlock(&udc->lock);
+		udc->driver->disconnect(&udc->gadget);
+		spin_lock(&udc->lock);
+
+		/* empty queues */
+		for (tmp = 0; tmp < UDC_EP_NUM; tmp++)
+			empty_req_queue(&udc->ep[tmp]);
+	}
+	udc->connected = 0;
+
+	spin_unlock(&udc->lock);
+	dev_info(udc->dev, "Device disconnected\n");
+}
+
+static void udc_drd_work(struct work_struct *work)
+{
+	struct udc *udc;
+
+	udc = container_of(to_delayed_work(work),
+			   struct udc, drd_work);
+
+	if (udc->conn_type) {
+		dev_dbg(udc->dev, "idle -> device\n");
+		start_udc(udc);
+	} else {
+		dev_dbg(udc->dev, "device -> idle\n");
+		stop_udc(udc);
+	}
+}
+
+static int usbd_connect_notify(struct notifier_block *self,
+			       unsigned long event, void *ptr)
+{
+	struct udc *udc = container_of(self, struct udc, nb);
+
+	dev_dbg(udc->dev, "%s: event: %lu\n", __func__, event);
+
+	udc->conn_type = event;
+
+	schedule_delayed_work(&udc->drd_work, 0);
+
+	return NOTIFY_OK;
+}
+
+static int udc_plat_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct udc *udc;
+	int ret;
+
+	udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
+
+	spin_lock_init(&udc->lock);
+	udc->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	udc->virt_addr = devm_ioremap_resource(dev, res);
+	if (IS_ERR(udc->virt_addr))
+		return PTR_ERR(udc->virt_addr);
+
+	/* udc csr registers base */
+	udc->csr = udc->virt_addr + UDC_CSR_ADDR;
+
+	/* dev registers base */
+	udc->regs = udc->virt_addr + UDC_DEVCFG_ADDR;
+
+	/* ep registers base */
+	udc->ep_regs = udc->virt_addr + UDC_EPREGS_ADDR;
+
+	/* fifo's base */
+	udc->rxfifo = (u32 __iomem *)(udc->virt_addr + UDC_RXFIFO_ADDR);
+	udc->txfifo = (u32 __iomem *)(udc->virt_addr + UDC_TXFIFO_ADDR);
+
+	udc->phys_addr = (unsigned long)res->start;
+
+	udc->irq = irq_of_parse_and_map(dev->of_node, 0);
+	if (udc->irq <= 0) {
+		dev_err(dev, "Can't parse and map interrupt\n");
+		return -EINVAL;
+	}
+
+	udc->udc_phy = devm_of_phy_get_by_index(dev, dev->of_node, 0);
+	if (IS_ERR(udc->udc_phy)) {
+		dev_err(dev, "Failed to obtain phy from device tree\n");
+		return PTR_ERR(udc->udc_phy);
+	}
+
+	ret = phy_init(udc->udc_phy);
+	if (ret) {
+		dev_err(dev, "UDC phy init failed");
+		return ret;
+	}
+
+	ret = phy_power_on(udc->udc_phy);
+	if (ret) {
+		dev_err(dev, "UDC phy power on failed");
+		phy_exit(udc->udc_phy);
+		return ret;
+	}
+
+	/* Register for extcon if supported */
+	if (of_get_property(dev->of_node, "extcon", NULL)) {
+		udc->edev = extcon_get_edev_by_phandle(dev, 0);
+		if (IS_ERR(udc->edev)) {
+			if (PTR_ERR(udc->edev) == -EPROBE_DEFER)
+				return -EPROBE_DEFER;
+			dev_err(dev, "Invalid or missing extcon\n");
+			ret = PTR_ERR(udc->edev);
+			goto exit_phy;
+		}
+
+		udc->nb.notifier_call = usbd_connect_notify;
+		ret = extcon_register_notifier(udc->edev, EXTCON_USB,
+					       &udc->nb);
+		if (ret < 0) {
+			dev_err(dev, "Can't register extcon device\n");
+			goto exit_phy;
+		}
+
+		ret = extcon_get_state(udc->edev, EXTCON_USB);
+		if (ret < 0) {
+			dev_err(dev, "Can't get cable state\n");
+			goto exit_extcon;
+		} else if (ret) {
+			udc->conn_type = ret;
+		}
+		INIT_DELAYED_WORK(&udc->drd_work, udc_drd_work);
+	}
+
+	/* init dma pools */
+	if (use_dma) {
+		ret = init_dma_pools(udc);
+		if (ret != 0)
+			goto exit_extcon;
+	}
+
+	ret = devm_request_irq(dev, udc->irq, udc_irq, IRQF_SHARED,
+			       "snps-udc", udc);
+	if (ret < 0) {
+		dev_err(dev, "Request irq %d failed for UDC\n", udc->irq);
+		goto exit_dma;
+	}
+
+	platform_set_drvdata(pdev, udc);
+	udc->chiprev = UDC_BCM_REV;
+
+	if (udc_probe(udc)) {
+		ret = -ENODEV;
+		goto exit_dma;
+	}
+	dev_info(dev, "Synopsys UDC platform driver probe successful\n");
+
+	return 0;
+
+exit_dma:
+	if (use_dma)
+		free_dma_pools(udc);
+exit_extcon:
+	if (udc->edev)
+		extcon_unregister_notifier(udc->edev, EXTCON_USB, &udc->nb);
+exit_phy:
+	if (udc->udc_phy) {
+		phy_power_off(udc->udc_phy);
+		phy_exit(udc->udc_phy);
+	}
+	return ret;
+}
+
+static int udc_plat_remove(struct platform_device *pdev)
+{
+	struct udc *dev;
+
+	dev = platform_get_drvdata(pdev);
+
+	usb_del_gadget_udc(&dev->gadget);
+	/* gadget driver must not be registered */
+	if (WARN_ON(dev->driver))
+		return 0;
+
+	/* dma pool cleanup */
+	free_dma_pools(dev);
+
+	udc_remove(dev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	phy_power_off(dev->udc_phy);
+	phy_exit(dev->udc_phy);
+	extcon_unregister_notifier(dev->edev, EXTCON_USB, &dev->nb);
+
+	dev_info(&pdev->dev, "Synopsys UDC platform driver removed\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int udc_plat_suspend(struct device *dev)
+{
+	struct udc *udc;
+
+	udc = dev_get_drvdata(dev);
+	stop_udc(udc);
+
+	if (extcon_get_state(udc->edev, EXTCON_USB) > 0) {
+		dev_dbg(udc->dev, "device -> idle\n");
+		stop_udc(udc);
+	}
+	phy_power_off(udc->udc_phy);
+	phy_exit(udc->udc_phy);
+
+	return 0;
+}
+
+static int udc_plat_resume(struct device *dev)
+{
+	struct udc *udc;
+	int ret;
+
+	udc = dev_get_drvdata(dev);
+
+	ret = phy_init(udc->udc_phy);
+	if (ret) {
+		dev_err(udc->dev, "UDC phy init failure");
+		return ret;
+	}
+
+	ret = phy_power_on(udc->udc_phy);
+	if (ret) {
+		dev_err(udc->dev, "UDC phy power on failure");
+		phy_exit(udc->udc_phy);
+		return ret;
+	}
+
+	if (extcon_get_state(udc->edev, EXTCON_USB) > 0) {
+		dev_dbg(udc->dev, "idle -> device\n");
+		start_udc(udc);
+	}
+
+	return 0;
+}
+static const struct dev_pm_ops udc_plat_pm_ops = {
+	.suspend	= udc_plat_suspend,
+	.resume		= udc_plat_resume,
+};
+#endif
+
+#if defined(CONFIG_OF)
+static const struct of_device_id of_udc_match[] = {
+	{ .compatible = "brcm,ns2-udc", },
+	{ .compatible = "brcm,cygnus-udc", },
+	{ .compatible = "brcm,iproc-udc", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, of_udc_match);
+#endif
+
+static struct platform_driver udc_plat_driver = {
+	.probe		= udc_plat_probe,
+	.remove		= udc_plat_remove,
+	.driver		= {
+		.name	= "snps-udc-plat",
+		.of_match_table = of_match_ptr(of_udc_match),
+#ifdef CONFIG_PM_SLEEP
+		.pm	= &udc_plat_pm_ops,
+#endif
+	},
+};
+module_platform_driver(udc_plat_driver);
+
+MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION);
+MODULE_AUTHOR("Broadcom");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
new file mode 100644
index 000000000..a8cadc45c
--- /dev/null
+++ b/drivers/usb/gadget/udc/tegra-xudc.c
@@ -0,0 +1,4048 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * NVIDIA Tegra XUSB device mode controller
+ *
+ * Copyright (c) 2013-2022, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2015, Google Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/phy/tegra/xusb.h>
+#include <linux/pm_domain.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/role.h>
+#include <linux/usb/phy.h>
+#include <linux/workqueue.h>
+
+/* XUSB_DEV registers */
+#define DB 0x004
+#define  DB_TARGET_MASK GENMASK(15, 8)
+#define  DB_TARGET(x) (((x) << 8) & DB_TARGET_MASK)
+#define  DB_STREAMID_MASK GENMASK(31, 16)
+#define  DB_STREAMID(x) (((x) << 16) & DB_STREAMID_MASK)
+#define ERSTSZ 0x008
+#define  ERSTSZ_ERSTXSZ_SHIFT(x) ((x) * 16)
+#define  ERSTSZ_ERSTXSZ_MASK GENMASK(15, 0)
+#define ERSTXBALO(x) (0x010 + 8 * (x))
+#define ERSTXBAHI(x) (0x014 + 8 * (x))
+#define ERDPLO 0x020
+#define  ERDPLO_EHB BIT(3)
+#define ERDPHI 0x024
+#define EREPLO 0x028
+#define  EREPLO_ECS BIT(0)
+#define  EREPLO_SEGI BIT(1)
+#define EREPHI 0x02c
+#define CTRL 0x030
+#define  CTRL_RUN BIT(0)
+#define  CTRL_LSE BIT(1)
+#define  CTRL_IE BIT(4)
+#define  CTRL_SMI_EVT BIT(5)
+#define  CTRL_SMI_DSE BIT(6)
+#define  CTRL_EWE BIT(7)
+#define  CTRL_DEVADDR_MASK GENMASK(30, 24)
+#define  CTRL_DEVADDR(x) (((x) << 24) & CTRL_DEVADDR_MASK)
+#define  CTRL_ENABLE BIT(31)
+#define ST 0x034
+#define  ST_RC BIT(0)
+#define  ST_IP BIT(4)
+#define RT_IMOD	0x038
+#define  RT_IMOD_IMODI_MASK GENMASK(15, 0)
+#define  RT_IMOD_IMODI(x) ((x) & RT_IMOD_IMODI_MASK)
+#define  RT_IMOD_IMODC_MASK GENMASK(31, 16)
+#define  RT_IMOD_IMODC(x) (((x) << 16) & RT_IMOD_IMODC_MASK)
+#define PORTSC 0x03c
+#define  PORTSC_CCS BIT(0)
+#define  PORTSC_PED BIT(1)
+#define  PORTSC_PR BIT(4)
+#define  PORTSC_PLS_SHIFT 5
+#define  PORTSC_PLS_MASK GENMASK(8, 5)
+#define  PORTSC_PLS_U0 0x0
+#define  PORTSC_PLS_U2 0x2
+#define  PORTSC_PLS_U3 0x3
+#define  PORTSC_PLS_DISABLED 0x4
+#define  PORTSC_PLS_RXDETECT 0x5
+#define  PORTSC_PLS_INACTIVE 0x6
+#define  PORTSC_PLS_RESUME 0xf
+#define  PORTSC_PLS(x) (((x) << PORTSC_PLS_SHIFT) & PORTSC_PLS_MASK)
+#define  PORTSC_PS_SHIFT 10
+#define  PORTSC_PS_MASK GENMASK(13, 10)
+#define  PORTSC_PS_UNDEFINED 0x0
+#define  PORTSC_PS_FS 0x1
+#define  PORTSC_PS_LS 0x2
+#define  PORTSC_PS_HS 0x3
+#define  PORTSC_PS_SS 0x4
+#define  PORTSC_LWS BIT(16)
+#define  PORTSC_CSC BIT(17)
+#define  PORTSC_WRC BIT(19)
+#define  PORTSC_PRC BIT(21)
+#define  PORTSC_PLC BIT(22)
+#define  PORTSC_CEC BIT(23)
+#define  PORTSC_WPR BIT(30)
+#define  PORTSC_CHANGE_MASK (PORTSC_CSC | PORTSC_WRC | PORTSC_PRC | \
+			     PORTSC_PLC | PORTSC_CEC)
+#define ECPLO 0x040
+#define ECPHI 0x044
+#define MFINDEX 0x048
+#define  MFINDEX_FRAME_SHIFT 3
+#define  MFINDEX_FRAME_MASK GENMASK(13, 3)
+#define PORTPM 0x04c
+#define  PORTPM_L1S_MASK GENMASK(1, 0)
+#define  PORTPM_L1S_DROP 0x0
+#define  PORTPM_L1S_ACCEPT 0x1
+#define  PORTPM_L1S_NYET 0x2
+#define  PORTPM_L1S_STALL 0x3
+#define  PORTPM_L1S(x) ((x) & PORTPM_L1S_MASK)
+#define  PORTPM_RWE BIT(3)
+#define  PORTPM_U2TIMEOUT_MASK GENMASK(15, 8)
+#define  PORTPM_U1TIMEOUT_MASK GENMASK(23, 16)
+#define  PORTPM_FLA BIT(24)
+#define  PORTPM_VBA BIT(25)
+#define  PORTPM_WOC BIT(26)
+#define  PORTPM_WOD BIT(27)
+#define  PORTPM_U1E BIT(28)
+#define  PORTPM_U2E BIT(29)
+#define  PORTPM_FRWE BIT(30)
+#define  PORTPM_PNG_CYA BIT(31)
+#define EP_HALT 0x050
+#define EP_PAUSE 0x054
+#define EP_RELOAD 0x058
+#define EP_STCHG 0x05c
+#define DEVNOTIF_LO 0x064
+#define  DEVNOTIF_LO_TRIG BIT(0)
+#define  DEVNOTIF_LO_TYPE_MASK GENMASK(7, 4)
+#define  DEVNOTIF_LO_TYPE(x) (((x) << 4)  & DEVNOTIF_LO_TYPE_MASK)
+#define  DEVNOTIF_LO_TYPE_FUNCTION_WAKE 0x1
+#define DEVNOTIF_HI 0x068
+#define PORTHALT 0x06c
+#define  PORTHALT_HALT_LTSSM BIT(0)
+#define  PORTHALT_HALT_REJECT BIT(1)
+#define  PORTHALT_STCHG_REQ BIT(20)
+#define  PORTHALT_STCHG_INTR_EN BIT(24)
+#define PORT_TM	0x070
+#define EP_THREAD_ACTIVE 0x074
+#define EP_STOPPED 0x078
+#define HSFSPI_COUNT0 0x100
+#define HSFSPI_COUNT13 0x134
+#define  HSFSPI_COUNT13_U2_RESUME_K_DURATION_MASK GENMASK(29, 0)
+#define  HSFSPI_COUNT13_U2_RESUME_K_DURATION(x) ((x) & \
+				HSFSPI_COUNT13_U2_RESUME_K_DURATION_MASK)
+#define BLCG 0x840
+#define SSPX_CORE_CNT0 0x610
+#define  SSPX_CORE_CNT0_PING_TBURST_MASK GENMASK(7, 0)
+#define  SSPX_CORE_CNT0_PING_TBURST(x) ((x) & SSPX_CORE_CNT0_PING_TBURST_MASK)
+#define SSPX_CORE_CNT30 0x688
+#define  SSPX_CORE_CNT30_LMPITP_TIMER_MASK GENMASK(19, 0)
+#define  SSPX_CORE_CNT30_LMPITP_TIMER(x) ((x) & \
+					SSPX_CORE_CNT30_LMPITP_TIMER_MASK)
+#define SSPX_CORE_CNT32 0x690
+#define  SSPX_CORE_CNT32_POLL_TBURST_MAX_MASK GENMASK(7, 0)
+#define  SSPX_CORE_CNT32_POLL_TBURST_MAX(x) ((x) & \
+					SSPX_CORE_CNT32_POLL_TBURST_MAX_MASK)
+#define SSPX_CORE_CNT56 0x6fc
+#define  SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX_MASK GENMASK(19, 0)
+#define  SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX(x) ((x) & \
+				SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX_MASK)
+#define SSPX_CORE_CNT57 0x700
+#define  SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX_MASK GENMASK(19, 0)
+#define  SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX(x) ((x) & \
+				SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX_MASK)
+#define SSPX_CORE_CNT65 0x720
+#define  SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID_MASK GENMASK(19, 0)
+#define  SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID(x) ((x) & \
+				SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID_MASK)
+#define SSPX_CORE_CNT66 0x724
+#define  SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID_MASK GENMASK(19, 0)
+#define  SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID(x) ((x) & \
+				SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID_MASK)
+#define SSPX_CORE_CNT67 0x728
+#define  SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID_MASK GENMASK(19, 0)
+#define  SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID(x) ((x) & \
+				SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID_MASK)
+#define SSPX_CORE_CNT72 0x73c
+#define  SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT_MASK GENMASK(19, 0)
+#define  SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT(x) ((x) & \
+				SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT_MASK)
+#define SSPX_CORE_PADCTL4 0x750
+#define  SSPX_CORE_PADCTL4_RXDAT_VLD_TIMEOUT_U3_MASK GENMASK(19, 0)
+#define  SSPX_CORE_PADCTL4_RXDAT_VLD_TIMEOUT_U3(x) ((x) & \
+				SSPX_CORE_PADCTL4_RXDAT_VLD_TIMEOUT_U3_MASK)
+#define  BLCG_DFPCI BIT(0)
+#define  BLCG_UFPCI BIT(1)
+#define  BLCG_FE BIT(2)
+#define  BLCG_COREPLL_PWRDN BIT(8)
+#define  BLCG_IOPLL_0_PWRDN BIT(9)
+#define  BLCG_IOPLL_1_PWRDN BIT(10)
+#define  BLCG_IOPLL_2_PWRDN BIT(11)
+#define  BLCG_ALL 0x1ff
+#define CFG_DEV_SSPI_XFER 0x858
+#define  CFG_DEV_SSPI_XFER_ACKTIMEOUT_MASK GENMASK(31, 0)
+#define  CFG_DEV_SSPI_XFER_ACKTIMEOUT(x) ((x) & \
+					CFG_DEV_SSPI_XFER_ACKTIMEOUT_MASK)
+#define CFG_DEV_FE 0x85c
+#define  CFG_DEV_FE_PORTREGSEL_MASK GENMASK(1, 0)
+#define  CFG_DEV_FE_PORTREGSEL_SS_PI 1
+#define  CFG_DEV_FE_PORTREGSEL_HSFS_PI 2
+#define  CFG_DEV_FE_PORTREGSEL(x) ((x) & CFG_DEV_FE_PORTREGSEL_MASK)
+#define  CFG_DEV_FE_INFINITE_SS_RETRY BIT(29)
+
+/* FPCI registers */
+#define XUSB_DEV_CFG_1 0x004
+#define  XUSB_DEV_CFG_1_IO_SPACE_EN BIT(0)
+#define  XUSB_DEV_CFG_1_MEMORY_SPACE_EN BIT(1)
+#define  XUSB_DEV_CFG_1_BUS_MASTER_EN BIT(2)
+#define XUSB_DEV_CFG_4 0x010
+#define  XUSB_DEV_CFG_4_BASE_ADDR_MASK GENMASK(31, 15)
+#define XUSB_DEV_CFG_5 0x014
+
+/* IPFS registers */
+#define XUSB_DEV_CONFIGURATION_0 0x180
+#define  XUSB_DEV_CONFIGURATION_0_EN_FPCI BIT(0)
+#define XUSB_DEV_INTR_MASK_0 0x188
+#define  XUSB_DEV_INTR_MASK_0_IP_INT_MASK BIT(16)
+
+struct tegra_xudc_ep_context {
+	__le32 info0;
+	__le32 info1;
+	__le32 deq_lo;
+	__le32 deq_hi;
+	__le32 tx_info;
+	__le32 rsvd[11];
+};
+
+#define EP_STATE_DISABLED 0
+#define EP_STATE_RUNNING 1
+#define EP_STATE_HALTED 2
+#define EP_STATE_STOPPED 3
+#define EP_STATE_ERROR 4
+
+#define EP_TYPE_INVALID 0
+#define EP_TYPE_ISOCH_OUT 1
+#define EP_TYPE_BULK_OUT 2
+#define EP_TYPE_INTERRUPT_OUT 3
+#define EP_TYPE_CONTROL 4
+#define EP_TYPE_ISCOH_IN 5
+#define EP_TYPE_BULK_IN 6
+#define EP_TYPE_INTERRUPT_IN 7
+
+#define BUILD_EP_CONTEXT_RW(name, member, shift, mask)			\
+static inline u32 ep_ctx_read_##name(struct tegra_xudc_ep_context *ctx)	\
+{									\
+	return (le32_to_cpu(ctx->member) >> (shift)) & (mask);		\
+}									\
+static inline void							\
+ep_ctx_write_##name(struct tegra_xudc_ep_context *ctx, u32 val)		\
+{									\
+	u32 tmp;							\
+									\
+	tmp = le32_to_cpu(ctx->member) & ~((mask) << (shift));		\
+	tmp |= (val & (mask)) << (shift);				\
+	ctx->member = cpu_to_le32(tmp);					\
+}
+
+BUILD_EP_CONTEXT_RW(state, info0, 0, 0x7)
+BUILD_EP_CONTEXT_RW(mult, info0, 8, 0x3)
+BUILD_EP_CONTEXT_RW(max_pstreams, info0, 10, 0x1f)
+BUILD_EP_CONTEXT_RW(lsa, info0, 15, 0x1)
+BUILD_EP_CONTEXT_RW(interval, info0, 16, 0xff)
+BUILD_EP_CONTEXT_RW(cerr, info1, 1, 0x3)
+BUILD_EP_CONTEXT_RW(type, info1, 3, 0x7)
+BUILD_EP_CONTEXT_RW(hid, info1, 7, 0x1)
+BUILD_EP_CONTEXT_RW(max_burst_size, info1, 8, 0xff)
+BUILD_EP_CONTEXT_RW(max_packet_size, info1, 16, 0xffff)
+BUILD_EP_CONTEXT_RW(dcs, deq_lo, 0, 0x1)
+BUILD_EP_CONTEXT_RW(deq_lo, deq_lo, 4, 0xfffffff)
+BUILD_EP_CONTEXT_RW(deq_hi, deq_hi, 0, 0xffffffff)
+BUILD_EP_CONTEXT_RW(avg_trb_len, tx_info, 0, 0xffff)
+BUILD_EP_CONTEXT_RW(max_esit_payload, tx_info, 16, 0xffff)
+BUILD_EP_CONTEXT_RW(edtla, rsvd[0], 0, 0xffffff)
+BUILD_EP_CONTEXT_RW(rsvd, rsvd[0], 24, 0x1)
+BUILD_EP_CONTEXT_RW(partial_td, rsvd[0], 25, 0x1)
+BUILD_EP_CONTEXT_RW(splitxstate, rsvd[0], 26, 0x1)
+BUILD_EP_CONTEXT_RW(seq_num, rsvd[0], 27, 0x1f)
+BUILD_EP_CONTEXT_RW(cerrcnt, rsvd[1], 18, 0x3)
+BUILD_EP_CONTEXT_RW(data_offset, rsvd[2], 0, 0x1ffff)
+BUILD_EP_CONTEXT_RW(numtrbs, rsvd[2], 22, 0x1f)
+BUILD_EP_CONTEXT_RW(devaddr, rsvd[6], 0, 0x7f)
+
+static inline u64 ep_ctx_read_deq_ptr(struct tegra_xudc_ep_context *ctx)
+{
+	return ((u64)ep_ctx_read_deq_hi(ctx) << 32) |
+		(ep_ctx_read_deq_lo(ctx) << 4);
+}
+
+static inline void
+ep_ctx_write_deq_ptr(struct tegra_xudc_ep_context *ctx, u64 addr)
+{
+	ep_ctx_write_deq_lo(ctx, lower_32_bits(addr) >> 4);
+	ep_ctx_write_deq_hi(ctx, upper_32_bits(addr));
+}
+
+struct tegra_xudc_trb {
+	__le32 data_lo;
+	__le32 data_hi;
+	__le32 status;
+	__le32 control;
+};
+
+#define TRB_TYPE_RSVD 0
+#define TRB_TYPE_NORMAL 1
+#define TRB_TYPE_SETUP_STAGE 2
+#define TRB_TYPE_DATA_STAGE 3
+#define TRB_TYPE_STATUS_STAGE 4
+#define TRB_TYPE_ISOCH 5
+#define TRB_TYPE_LINK 6
+#define TRB_TYPE_TRANSFER_EVENT 32
+#define TRB_TYPE_PORT_STATUS_CHANGE_EVENT 34
+#define TRB_TYPE_STREAM 48
+#define TRB_TYPE_SETUP_PACKET_EVENT 63
+
+#define TRB_CMPL_CODE_INVALID 0
+#define TRB_CMPL_CODE_SUCCESS 1
+#define TRB_CMPL_CODE_DATA_BUFFER_ERR 2
+#define TRB_CMPL_CODE_BABBLE_DETECTED_ERR 3
+#define TRB_CMPL_CODE_USB_TRANS_ERR 4
+#define TRB_CMPL_CODE_TRB_ERR 5
+#define TRB_CMPL_CODE_STALL 6
+#define TRB_CMPL_CODE_INVALID_STREAM_TYPE_ERR 10
+#define TRB_CMPL_CODE_SHORT_PACKET 13
+#define TRB_CMPL_CODE_RING_UNDERRUN 14
+#define TRB_CMPL_CODE_RING_OVERRUN 15
+#define TRB_CMPL_CODE_EVENT_RING_FULL_ERR 21
+#define TRB_CMPL_CODE_STOPPED 26
+#define TRB_CMPL_CODE_ISOCH_BUFFER_OVERRUN 31
+#define TRB_CMPL_CODE_STREAM_NUMP_ERROR 219
+#define TRB_CMPL_CODE_PRIME_PIPE_RECEIVED 220
+#define TRB_CMPL_CODE_HOST_REJECTED 221
+#define TRB_CMPL_CODE_CTRL_DIR_ERR 222
+#define TRB_CMPL_CODE_CTRL_SEQNUM_ERR 223
+
+#define BUILD_TRB_RW(name, member, shift, mask)				\
+static inline u32 trb_read_##name(struct tegra_xudc_trb *trb)		\
+{									\
+	return (le32_to_cpu(trb->member) >> (shift)) & (mask);		\
+}									\
+static inline void							\
+trb_write_##name(struct tegra_xudc_trb *trb, u32 val)			\
+{									\
+	u32 tmp;							\
+									\
+	tmp = le32_to_cpu(trb->member) & ~((mask) << (shift));		\
+	tmp |= (val & (mask)) << (shift);				\
+	trb->member = cpu_to_le32(tmp);					\
+}
+
+BUILD_TRB_RW(data_lo, data_lo, 0, 0xffffffff)
+BUILD_TRB_RW(data_hi, data_hi, 0, 0xffffffff)
+BUILD_TRB_RW(seq_num, status, 0, 0xffff)
+BUILD_TRB_RW(transfer_len, status, 0, 0xffffff)
+BUILD_TRB_RW(td_size, status, 17, 0x1f)
+BUILD_TRB_RW(cmpl_code, status, 24, 0xff)
+BUILD_TRB_RW(cycle, control, 0, 0x1)
+BUILD_TRB_RW(toggle_cycle, control, 1, 0x1)
+BUILD_TRB_RW(isp, control, 2, 0x1)
+BUILD_TRB_RW(chain, control, 4, 0x1)
+BUILD_TRB_RW(ioc, control, 5, 0x1)
+BUILD_TRB_RW(type, control, 10, 0x3f)
+BUILD_TRB_RW(stream_id, control, 16, 0xffff)
+BUILD_TRB_RW(endpoint_id, control, 16, 0x1f)
+BUILD_TRB_RW(tlbpc, control, 16, 0xf)
+BUILD_TRB_RW(data_stage_dir, control, 16, 0x1)
+BUILD_TRB_RW(frame_id, control, 20, 0x7ff)
+BUILD_TRB_RW(sia, control, 31, 0x1)
+
+static inline u64 trb_read_data_ptr(struct tegra_xudc_trb *trb)
+{
+	return ((u64)trb_read_data_hi(trb) << 32) |
+		trb_read_data_lo(trb);
+}
+
+static inline void trb_write_data_ptr(struct tegra_xudc_trb *trb, u64 addr)
+{
+	trb_write_data_lo(trb, lower_32_bits(addr));
+	trb_write_data_hi(trb, upper_32_bits(addr));
+}
+
+struct tegra_xudc_request {
+	struct usb_request usb_req;
+
+	size_t buf_queued;
+	unsigned int trbs_queued;
+	unsigned int trbs_needed;
+	bool need_zlp;
+
+	struct tegra_xudc_trb *first_trb;
+	struct tegra_xudc_trb *last_trb;
+
+	struct list_head list;
+};
+
+struct tegra_xudc_ep {
+	struct tegra_xudc *xudc;
+	struct usb_ep usb_ep;
+	unsigned int index;
+	char name[8];
+
+	struct tegra_xudc_ep_context *context;
+
+#define XUDC_TRANSFER_RING_SIZE 64
+	struct tegra_xudc_trb *transfer_ring;
+	dma_addr_t transfer_ring_phys;
+
+	unsigned int enq_ptr;
+	unsigned int deq_ptr;
+	bool pcs;
+	bool ring_full;
+	bool stream_rejected;
+
+	struct list_head queue;
+	const struct usb_endpoint_descriptor *desc;
+	const struct usb_ss_ep_comp_descriptor *comp_desc;
+};
+
+struct tegra_xudc_sel_timing {
+	__u8 u1sel;
+	__u8 u1pel;
+	__le16 u2sel;
+	__le16 u2pel;
+};
+
+enum tegra_xudc_setup_state {
+	WAIT_FOR_SETUP,
+	DATA_STAGE_XFER,
+	DATA_STAGE_RECV,
+	STATUS_STAGE_XFER,
+	STATUS_STAGE_RECV,
+};
+
+struct tegra_xudc_setup_packet {
+	struct usb_ctrlrequest ctrl_req;
+	unsigned int seq_num;
+};
+
+struct tegra_xudc_save_regs {
+	u32 ctrl;
+	u32 portpm;
+};
+
+struct tegra_xudc {
+	struct device *dev;
+	const struct tegra_xudc_soc *soc;
+	struct tegra_xusb_padctl *padctl;
+
+	spinlock_t lock;
+
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *driver;
+
+#define XUDC_NR_EVENT_RINGS 2
+#define XUDC_EVENT_RING_SIZE 4096
+	struct tegra_xudc_trb *event_ring[XUDC_NR_EVENT_RINGS];
+	dma_addr_t event_ring_phys[XUDC_NR_EVENT_RINGS];
+	unsigned int event_ring_index;
+	unsigned int event_ring_deq_ptr;
+	bool ccs;
+
+#define XUDC_NR_EPS 32
+	struct tegra_xudc_ep ep[XUDC_NR_EPS];
+	struct tegra_xudc_ep_context *ep_context;
+	dma_addr_t ep_context_phys;
+
+	struct device *genpd_dev_device;
+	struct device *genpd_dev_ss;
+	struct device_link *genpd_dl_device;
+	struct device_link *genpd_dl_ss;
+
+	struct dma_pool *transfer_ring_pool;
+
+	bool queued_setup_packet;
+	struct tegra_xudc_setup_packet setup_packet;
+	enum tegra_xudc_setup_state setup_state;
+	u16 setup_seq_num;
+
+	u16 dev_addr;
+	u16 isoch_delay;
+	struct tegra_xudc_sel_timing sel_timing;
+	u8 test_mode_pattern;
+	u16 status_buf;
+	struct tegra_xudc_request *ep0_req;
+
+	bool pullup;
+
+	unsigned int nr_enabled_eps;
+	unsigned int nr_isoch_eps;
+
+	unsigned int device_state;
+	unsigned int resume_state;
+
+	int irq;
+
+	void __iomem *base;
+	resource_size_t phys_base;
+	void __iomem *ipfs;
+	void __iomem *fpci;
+
+	struct regulator_bulk_data *supplies;
+
+	struct clk_bulk_data *clks;
+
+	bool device_mode;
+	struct work_struct usb_role_sw_work;
+
+	struct phy **usb3_phy;
+	struct phy *curr_usb3_phy;
+	struct phy **utmi_phy;
+	struct phy *curr_utmi_phy;
+
+	struct tegra_xudc_save_regs saved_regs;
+	bool suspended;
+	bool powergated;
+
+	struct usb_phy **usbphy;
+	struct usb_phy *curr_usbphy;
+	struct notifier_block vbus_nb;
+
+	struct completion disconnect_complete;
+
+	bool selfpowered;
+
+#define TOGGLE_VBUS_WAIT_MS 100
+	struct delayed_work plc_reset_work;
+	bool wait_csc;
+
+	struct delayed_work port_reset_war_work;
+	bool wait_for_sec_prc;
+};
+
+#define XUDC_TRB_MAX_BUFFER_SIZE 65536
+#define XUDC_MAX_ISOCH_EPS 4
+#define XUDC_INTERRUPT_MODERATION_US 0
+
+static struct usb_endpoint_descriptor tegra_xudc_ep0_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+	.bEndpointAddress = 0,
+	.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize = cpu_to_le16(64),
+};
+
+struct tegra_xudc_soc {
+	const char * const *supply_names;
+	unsigned int num_supplies;
+	const char * const *clock_names;
+	unsigned int num_clks;
+	unsigned int num_phys;
+	bool u1_enable;
+	bool u2_enable;
+	bool lpm_enable;
+	bool invalid_seq_num;
+	bool pls_quirk;
+	bool port_reset_quirk;
+	bool port_speed_quirk;
+	bool has_ipfs;
+};
+
+static inline u32 fpci_readl(struct tegra_xudc *xudc, unsigned int offset)
+{
+	return readl(xudc->fpci + offset);
+}
+
+static inline void fpci_writel(struct tegra_xudc *xudc, u32 val,
+			       unsigned int offset)
+{
+	writel(val, xudc->fpci + offset);
+}
+
+static inline u32 ipfs_readl(struct tegra_xudc *xudc, unsigned int offset)
+{
+	return readl(xudc->ipfs + offset);
+}
+
+static inline void ipfs_writel(struct tegra_xudc *xudc, u32 val,
+			       unsigned int offset)
+{
+	writel(val, xudc->ipfs + offset);
+}
+
+static inline u32 xudc_readl(struct tegra_xudc *xudc, unsigned int offset)
+{
+	return readl(xudc->base + offset);
+}
+
+static inline void xudc_writel(struct tegra_xudc *xudc, u32 val,
+			       unsigned int offset)
+{
+	writel(val, xudc->base + offset);
+}
+
+static inline int xudc_readl_poll(struct tegra_xudc *xudc,
+				  unsigned int offset, u32 mask, u32 val)
+{
+	u32 regval;
+
+	return readl_poll_timeout_atomic(xudc->base + offset, regval,
+					 (regval & mask) == val, 1, 100);
+}
+
+static inline struct tegra_xudc *to_xudc(struct usb_gadget *gadget)
+{
+	return container_of(gadget, struct tegra_xudc, gadget);
+}
+
+static inline struct tegra_xudc_ep *to_xudc_ep(struct usb_ep *ep)
+{
+	return container_of(ep, struct tegra_xudc_ep, usb_ep);
+}
+
+static inline struct tegra_xudc_request *to_xudc_req(struct usb_request *req)
+{
+	return container_of(req, struct tegra_xudc_request, usb_req);
+}
+
+static inline void dump_trb(struct tegra_xudc *xudc, const char *type,
+			    struct tegra_xudc_trb *trb)
+{
+	dev_dbg(xudc->dev,
+		"%s: %p, lo = %#x, hi = %#x, status = %#x, control = %#x\n",
+		type, trb, trb->data_lo, trb->data_hi, trb->status,
+		trb->control);
+}
+
+static void tegra_xudc_limit_port_speed(struct tegra_xudc *xudc)
+{
+	u32 val;
+
+	/* limit port speed to gen 1 */
+	val = xudc_readl(xudc, SSPX_CORE_CNT56);
+	val &= ~(SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX_MASK);
+	val |= SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX(0x260);
+	xudc_writel(xudc, val, SSPX_CORE_CNT56);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT57);
+	val &= ~(SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX_MASK);
+	val |= SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX(0x6D6);
+	xudc_writel(xudc, val, SSPX_CORE_CNT57);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT65);
+	val &= ~(SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID_MASK);
+	val |= SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID(0x4B0);
+	xudc_writel(xudc, val, SSPX_CORE_CNT66);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT66);
+	val &= ~(SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID_MASK);
+	val |= SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID(0x4B0);
+	xudc_writel(xudc, val, SSPX_CORE_CNT66);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT67);
+	val &= ~(SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID_MASK);
+	val |= SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID(0x4B0);
+	xudc_writel(xudc, val, SSPX_CORE_CNT67);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT72);
+	val &= ~(SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT_MASK);
+	val |= SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT(0x10);
+	xudc_writel(xudc, val, SSPX_CORE_CNT72);
+}
+
+static void tegra_xudc_restore_port_speed(struct tegra_xudc *xudc)
+{
+	u32 val;
+
+	/* restore port speed to gen2 */
+	val = xudc_readl(xudc, SSPX_CORE_CNT56);
+	val &= ~(SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX_MASK);
+	val |= SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX(0x438);
+	xudc_writel(xudc, val, SSPX_CORE_CNT56);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT57);
+	val &= ~(SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX_MASK);
+	val |= SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX(0x528);
+	xudc_writel(xudc, val, SSPX_CORE_CNT57);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT65);
+	val &= ~(SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID_MASK);
+	val |= SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID(0xE10);
+	xudc_writel(xudc, val, SSPX_CORE_CNT66);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT66);
+	val &= ~(SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID_MASK);
+	val |= SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID(0x348);
+	xudc_writel(xudc, val, SSPX_CORE_CNT66);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT67);
+	val &= ~(SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID_MASK);
+	val |= SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID(0x5a0);
+	xudc_writel(xudc, val, SSPX_CORE_CNT67);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT72);
+	val &= ~(SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT_MASK);
+	val |= SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT(0x1c21);
+	xudc_writel(xudc, val, SSPX_CORE_CNT72);
+}
+
+static void tegra_xudc_device_mode_on(struct tegra_xudc *xudc)
+{
+	int err;
+
+	pm_runtime_get_sync(xudc->dev);
+
+	tegra_phy_xusb_utmi_pad_power_on(xudc->curr_utmi_phy);
+
+	err = phy_power_on(xudc->curr_utmi_phy);
+	if (err < 0)
+		dev_err(xudc->dev, "UTMI power on failed: %d\n", err);
+
+	err = phy_power_on(xudc->curr_usb3_phy);
+	if (err < 0)
+		dev_err(xudc->dev, "USB3 PHY power on failed: %d\n", err);
+
+	dev_dbg(xudc->dev, "device mode on\n");
+
+	phy_set_mode_ext(xudc->curr_utmi_phy, PHY_MODE_USB_OTG,
+			 USB_ROLE_DEVICE);
+}
+
+static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc)
+{
+	bool connected = false;
+	u32 pls, val;
+	int err;
+
+	dev_dbg(xudc->dev, "device mode off\n");
+
+	connected = !!(xudc_readl(xudc, PORTSC) & PORTSC_CCS);
+
+	reinit_completion(&xudc->disconnect_complete);
+
+	if (xudc->soc->port_speed_quirk)
+		tegra_xudc_restore_port_speed(xudc);
+
+	phy_set_mode_ext(xudc->curr_utmi_phy, PHY_MODE_USB_OTG, USB_ROLE_NONE);
+
+	pls = (xudc_readl(xudc, PORTSC) & PORTSC_PLS_MASK) >>
+		PORTSC_PLS_SHIFT;
+
+	/* Direct link to U0 if disconnected in RESUME or U2. */
+	if (xudc->soc->pls_quirk && xudc->gadget.speed == USB_SPEED_SUPER &&
+	    (pls == PORTSC_PLS_RESUME || pls == PORTSC_PLS_U2)) {
+		val = xudc_readl(xudc, PORTPM);
+		val |= PORTPM_FRWE;
+		xudc_writel(xudc, val, PORTPM);
+
+		val = xudc_readl(xudc, PORTSC);
+		val &= ~(PORTSC_CHANGE_MASK | PORTSC_PLS_MASK);
+		val |= PORTSC_LWS | PORTSC_PLS(PORTSC_PLS_U0);
+		xudc_writel(xudc, val, PORTSC);
+	}
+
+	/* Wait for disconnect event. */
+	if (connected)
+		wait_for_completion(&xudc->disconnect_complete);
+
+	/* Make sure interrupt handler has completed before powergating. */
+	synchronize_irq(xudc->irq);
+
+	tegra_phy_xusb_utmi_pad_power_down(xudc->curr_utmi_phy);
+
+	err = phy_power_off(xudc->curr_utmi_phy);
+	if (err < 0)
+		dev_err(xudc->dev, "UTMI PHY power off failed: %d\n", err);
+
+	err = phy_power_off(xudc->curr_usb3_phy);
+	if (err < 0)
+		dev_err(xudc->dev, "USB3 PHY power off failed: %d\n", err);
+
+	pm_runtime_put(xudc->dev);
+}
+
+static void tegra_xudc_usb_role_sw_work(struct work_struct *work)
+{
+	struct tegra_xudc *xudc = container_of(work, struct tegra_xudc,
+					       usb_role_sw_work);
+
+	if (xudc->device_mode)
+		tegra_xudc_device_mode_on(xudc);
+	else
+		tegra_xudc_device_mode_off(xudc);
+}
+
+static int tegra_xudc_get_phy_index(struct tegra_xudc *xudc,
+					      struct usb_phy *usbphy)
+{
+	unsigned int i;
+
+	for (i = 0; i < xudc->soc->num_phys; i++) {
+		if (xudc->usbphy[i] && usbphy == xudc->usbphy[i])
+			return i;
+	}
+
+	dev_info(xudc->dev, "phy index could not be found for shared USB PHY");
+	return -1;
+}
+
+static int tegra_xudc_vbus_notify(struct notifier_block *nb,
+					 unsigned long action, void *data)
+{
+	struct tegra_xudc *xudc = container_of(nb, struct tegra_xudc,
+					       vbus_nb);
+	struct usb_phy *usbphy = (struct usb_phy *)data;
+	int phy_index;
+
+	dev_dbg(xudc->dev, "%s(): event is %d\n", __func__, usbphy->last_event);
+
+	if ((xudc->device_mode && usbphy->last_event == USB_EVENT_VBUS) ||
+	    (!xudc->device_mode && usbphy->last_event != USB_EVENT_VBUS)) {
+		dev_dbg(xudc->dev, "Same role(%d) received. Ignore",
+			xudc->device_mode);
+		return NOTIFY_OK;
+	}
+
+	xudc->device_mode = (usbphy->last_event == USB_EVENT_VBUS) ? true :
+								     false;
+
+	phy_index = tegra_xudc_get_phy_index(xudc, usbphy);
+	dev_dbg(xudc->dev, "%s(): current phy index is %d\n", __func__,
+		phy_index);
+
+	if (!xudc->suspended && phy_index != -1) {
+		xudc->curr_utmi_phy = xudc->utmi_phy[phy_index];
+		xudc->curr_usb3_phy = xudc->usb3_phy[phy_index];
+		xudc->curr_usbphy = usbphy;
+		schedule_work(&xudc->usb_role_sw_work);
+	}
+
+	return NOTIFY_OK;
+}
+
+static void tegra_xudc_plc_reset_work(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct tegra_xudc *xudc = container_of(dwork, struct tegra_xudc,
+					       plc_reset_work);
+	unsigned long flags;
+
+	spin_lock_irqsave(&xudc->lock, flags);
+
+	if (xudc->wait_csc) {
+		u32 pls = (xudc_readl(xudc, PORTSC) & PORTSC_PLS_MASK) >>
+			PORTSC_PLS_SHIFT;
+
+		if (pls == PORTSC_PLS_INACTIVE) {
+			dev_info(xudc->dev, "PLS = Inactive. Toggle VBUS\n");
+			phy_set_mode_ext(xudc->curr_utmi_phy, PHY_MODE_USB_OTG,
+					 USB_ROLE_NONE);
+			phy_set_mode_ext(xudc->curr_utmi_phy, PHY_MODE_USB_OTG,
+					 USB_ROLE_DEVICE);
+
+			xudc->wait_csc = false;
+		}
+	}
+
+	spin_unlock_irqrestore(&xudc->lock, flags);
+}
+
+static void tegra_xudc_port_reset_war_work(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct tegra_xudc *xudc =
+		container_of(dwork, struct tegra_xudc, port_reset_war_work);
+	unsigned long flags;
+	u32 pls;
+	int ret;
+
+	spin_lock_irqsave(&xudc->lock, flags);
+
+	if (xudc->device_mode && xudc->wait_for_sec_prc) {
+		pls = (xudc_readl(xudc, PORTSC) & PORTSC_PLS_MASK) >>
+			PORTSC_PLS_SHIFT;
+		dev_dbg(xudc->dev, "pls = %x\n", pls);
+
+		if (pls == PORTSC_PLS_DISABLED) {
+			dev_dbg(xudc->dev, "toggle vbus\n");
+			/* PRC doesn't complete in 100ms, toggle the vbus */
+			ret = tegra_phy_xusb_utmi_port_reset(
+				xudc->curr_utmi_phy);
+			if (ret == 1)
+				xudc->wait_for_sec_prc = 0;
+		}
+	}
+
+	spin_unlock_irqrestore(&xudc->lock, flags);
+}
+
+static dma_addr_t trb_virt_to_phys(struct tegra_xudc_ep *ep,
+				   struct tegra_xudc_trb *trb)
+{
+	unsigned int index;
+
+	index = trb - ep->transfer_ring;
+
+	if (WARN_ON(index >= XUDC_TRANSFER_RING_SIZE))
+		return 0;
+
+	return (ep->transfer_ring_phys + index * sizeof(*trb));
+}
+
+static struct tegra_xudc_trb *trb_phys_to_virt(struct tegra_xudc_ep *ep,
+					       dma_addr_t addr)
+{
+	struct tegra_xudc_trb *trb;
+	unsigned int index;
+
+	index = (addr - ep->transfer_ring_phys) / sizeof(*trb);
+
+	if (WARN_ON(index >= XUDC_TRANSFER_RING_SIZE))
+		return NULL;
+
+	trb = &ep->transfer_ring[index];
+
+	return trb;
+}
+
+static void ep_reload(struct tegra_xudc *xudc, unsigned int ep)
+{
+	xudc_writel(xudc, BIT(ep), EP_RELOAD);
+	xudc_readl_poll(xudc, EP_RELOAD, BIT(ep), 0);
+}
+
+static void ep_pause(struct tegra_xudc *xudc, unsigned int ep)
+{
+	u32 val;
+
+	val = xudc_readl(xudc, EP_PAUSE);
+	if (val & BIT(ep))
+		return;
+	val |= BIT(ep);
+
+	xudc_writel(xudc, val, EP_PAUSE);
+
+	xudc_readl_poll(xudc, EP_STCHG, BIT(ep), BIT(ep));
+
+	xudc_writel(xudc, BIT(ep), EP_STCHG);
+}
+
+static void ep_unpause(struct tegra_xudc *xudc, unsigned int ep)
+{
+	u32 val;
+
+	val = xudc_readl(xudc, EP_PAUSE);
+	if (!(val & BIT(ep)))
+		return;
+	val &= ~BIT(ep);
+
+	xudc_writel(xudc, val, EP_PAUSE);
+
+	xudc_readl_poll(xudc, EP_STCHG, BIT(ep), BIT(ep));
+
+	xudc_writel(xudc, BIT(ep), EP_STCHG);
+}
+
+static void ep_unpause_all(struct tegra_xudc *xudc)
+{
+	u32 val;
+
+	val = xudc_readl(xudc, EP_PAUSE);
+
+	xudc_writel(xudc, 0, EP_PAUSE);
+
+	xudc_readl_poll(xudc, EP_STCHG, val, val);
+
+	xudc_writel(xudc, val, EP_STCHG);
+}
+
+static void ep_halt(struct tegra_xudc *xudc, unsigned int ep)
+{
+	u32 val;
+
+	val = xudc_readl(xudc, EP_HALT);
+	if (val & BIT(ep))
+		return;
+	val |= BIT(ep);
+	xudc_writel(xudc, val, EP_HALT);
+
+	xudc_readl_poll(xudc, EP_STCHG, BIT(ep), BIT(ep));
+
+	xudc_writel(xudc, BIT(ep), EP_STCHG);
+}
+
+static void ep_unhalt(struct tegra_xudc *xudc, unsigned int ep)
+{
+	u32 val;
+
+	val = xudc_readl(xudc, EP_HALT);
+	if (!(val & BIT(ep)))
+		return;
+	val &= ~BIT(ep);
+	xudc_writel(xudc, val, EP_HALT);
+
+	xudc_readl_poll(xudc, EP_STCHG, BIT(ep), BIT(ep));
+
+	xudc_writel(xudc, BIT(ep), EP_STCHG);
+}
+
+static void ep_unhalt_all(struct tegra_xudc *xudc)
+{
+	u32 val;
+
+	val = xudc_readl(xudc, EP_HALT);
+	if (!val)
+		return;
+	xudc_writel(xudc, 0, EP_HALT);
+
+	xudc_readl_poll(xudc, EP_STCHG, val, val);
+
+	xudc_writel(xudc, val, EP_STCHG);
+}
+
+static void ep_wait_for_stopped(struct tegra_xudc *xudc, unsigned int ep)
+{
+	xudc_readl_poll(xudc, EP_STOPPED, BIT(ep), BIT(ep));
+	xudc_writel(xudc, BIT(ep), EP_STOPPED);
+}
+
+static void ep_wait_for_inactive(struct tegra_xudc *xudc, unsigned int ep)
+{
+	xudc_readl_poll(xudc, EP_THREAD_ACTIVE, BIT(ep), 0);
+}
+
+static void tegra_xudc_req_done(struct tegra_xudc_ep *ep,
+				struct tegra_xudc_request *req, int status)
+{
+	struct tegra_xudc *xudc = ep->xudc;
+
+	dev_dbg(xudc->dev, "completing request %p on EP %u with status %d\n",
+		 req, ep->index, status);
+
+	if (likely(req->usb_req.status == -EINPROGRESS))
+		req->usb_req.status = status;
+
+	list_del_init(&req->list);
+
+	if (usb_endpoint_xfer_control(ep->desc)) {
+		usb_gadget_unmap_request(&xudc->gadget, &req->usb_req,
+					 (xudc->setup_state ==
+					  DATA_STAGE_XFER));
+	} else {
+		usb_gadget_unmap_request(&xudc->gadget, &req->usb_req,
+					 usb_endpoint_dir_in(ep->desc));
+	}
+
+	spin_unlock(&xudc->lock);
+	usb_gadget_giveback_request(&ep->usb_ep, &req->usb_req);
+	spin_lock(&xudc->lock);
+}
+
+static void tegra_xudc_ep_nuke(struct tegra_xudc_ep *ep, int status)
+{
+	struct tegra_xudc_request *req;
+
+	while (!list_empty(&ep->queue)) {
+		req = list_first_entry(&ep->queue, struct tegra_xudc_request,
+				       list);
+		tegra_xudc_req_done(ep, req, status);
+	}
+}
+
+static unsigned int ep_available_trbs(struct tegra_xudc_ep *ep)
+{
+	if (ep->ring_full)
+		return 0;
+
+	if (ep->deq_ptr > ep->enq_ptr)
+		return ep->deq_ptr - ep->enq_ptr - 1;
+
+	return XUDC_TRANSFER_RING_SIZE - (ep->enq_ptr - ep->deq_ptr) - 2;
+}
+
+static void tegra_xudc_queue_one_trb(struct tegra_xudc_ep *ep,
+				     struct tegra_xudc_request *req,
+				     struct tegra_xudc_trb *trb,
+				     bool ioc)
+{
+	struct tegra_xudc *xudc = ep->xudc;
+	dma_addr_t buf_addr;
+	size_t len;
+
+	len = min_t(size_t, XUDC_TRB_MAX_BUFFER_SIZE, req->usb_req.length -
+		    req->buf_queued);
+	if (len > 0)
+		buf_addr = req->usb_req.dma + req->buf_queued;
+	else
+		buf_addr = 0;
+
+	trb_write_data_ptr(trb, buf_addr);
+
+	trb_write_transfer_len(trb, len);
+	trb_write_td_size(trb, req->trbs_needed - req->trbs_queued - 1);
+
+	if (req->trbs_queued == req->trbs_needed - 1 ||
+		(req->need_zlp && req->trbs_queued == req->trbs_needed - 2))
+		trb_write_chain(trb, 0);
+	else
+		trb_write_chain(trb, 1);
+
+	trb_write_ioc(trb, ioc);
+
+	if (usb_endpoint_dir_out(ep->desc) ||
+	    (usb_endpoint_xfer_control(ep->desc) &&
+	     (xudc->setup_state == DATA_STAGE_RECV)))
+		trb_write_isp(trb, 1);
+	else
+		trb_write_isp(trb, 0);
+
+	if (usb_endpoint_xfer_control(ep->desc)) {
+		if (xudc->setup_state == DATA_STAGE_XFER ||
+		    xudc->setup_state == DATA_STAGE_RECV)
+			trb_write_type(trb, TRB_TYPE_DATA_STAGE);
+		else
+			trb_write_type(trb, TRB_TYPE_STATUS_STAGE);
+
+		if (xudc->setup_state == DATA_STAGE_XFER ||
+		    xudc->setup_state == STATUS_STAGE_XFER)
+			trb_write_data_stage_dir(trb, 1);
+		else
+			trb_write_data_stage_dir(trb, 0);
+	} else if (usb_endpoint_xfer_isoc(ep->desc)) {
+		trb_write_type(trb, TRB_TYPE_ISOCH);
+		trb_write_sia(trb, 1);
+		trb_write_frame_id(trb, 0);
+		trb_write_tlbpc(trb, 0);
+	} else if (usb_ss_max_streams(ep->comp_desc)) {
+		trb_write_type(trb, TRB_TYPE_STREAM);
+		trb_write_stream_id(trb, req->usb_req.stream_id);
+	} else {
+		trb_write_type(trb, TRB_TYPE_NORMAL);
+		trb_write_stream_id(trb, 0);
+	}
+
+	trb_write_cycle(trb, ep->pcs);
+
+	req->trbs_queued++;
+	req->buf_queued += len;
+
+	dump_trb(xudc, "TRANSFER", trb);
+}
+
+static unsigned int tegra_xudc_queue_trbs(struct tegra_xudc_ep *ep,
+					  struct tegra_xudc_request *req)
+{
+	unsigned int i, count, available;
+	bool wait_td = false;
+
+	available = ep_available_trbs(ep);
+	count = req->trbs_needed - req->trbs_queued;
+	if (available < count) {
+		count = available;
+		ep->ring_full = true;
+	}
+
+	/*
+	 * To generate zero-length packet on USB bus, SW needs schedule a
+	 * standalone zero-length TD. According to HW's behavior, SW needs
+	 * to schedule TDs in different ways for different endpoint types.
+	 *
+	 * For control endpoint:
+	 * - Data stage TD (IOC = 1, CH = 0)
+	 * - Ring doorbell and wait transfer event
+	 * - Data stage TD for ZLP (IOC = 1, CH = 0)
+	 * - Ring doorbell
+	 *
+	 * For bulk and interrupt endpoints:
+	 * - Normal transfer TD (IOC = 0, CH = 0)
+	 * - Normal transfer TD for ZLP (IOC = 1, CH = 0)
+	 * - Ring doorbell
+	 */
+
+	if (req->need_zlp && usb_endpoint_xfer_control(ep->desc) && count > 1)
+		wait_td = true;
+
+	if (!req->first_trb)
+		req->first_trb = &ep->transfer_ring[ep->enq_ptr];
+
+	for (i = 0; i < count; i++) {
+		struct tegra_xudc_trb *trb = &ep->transfer_ring[ep->enq_ptr];
+		bool ioc = false;
+
+		if ((i == count - 1) || (wait_td && i == count - 2))
+			ioc = true;
+
+		tegra_xudc_queue_one_trb(ep, req, trb, ioc);
+		req->last_trb = trb;
+
+		ep->enq_ptr++;
+		if (ep->enq_ptr == XUDC_TRANSFER_RING_SIZE - 1) {
+			trb = &ep->transfer_ring[ep->enq_ptr];
+			trb_write_cycle(trb, ep->pcs);
+			ep->pcs = !ep->pcs;
+			ep->enq_ptr = 0;
+		}
+
+		if (ioc)
+			break;
+	}
+
+	return count;
+}
+
+static void tegra_xudc_ep_ring_doorbell(struct tegra_xudc_ep *ep)
+{
+	struct tegra_xudc *xudc = ep->xudc;
+	u32 val;
+
+	if (list_empty(&ep->queue))
+		return;
+
+	val = DB_TARGET(ep->index);
+	if (usb_endpoint_xfer_control(ep->desc)) {
+		val |= DB_STREAMID(xudc->setup_seq_num);
+	} else if (usb_ss_max_streams(ep->comp_desc) > 0) {
+		struct tegra_xudc_request *req;
+
+		/* Don't ring doorbell if the stream has been rejected. */
+		if (ep->stream_rejected)
+			return;
+
+		req = list_first_entry(&ep->queue, struct tegra_xudc_request,
+				       list);
+		val |= DB_STREAMID(req->usb_req.stream_id);
+	}
+
+	dev_dbg(xudc->dev, "ring doorbell: %#x\n", val);
+	xudc_writel(xudc, val, DB);
+}
+
+static void tegra_xudc_ep_kick_queue(struct tegra_xudc_ep *ep)
+{
+	struct tegra_xudc_request *req;
+	bool trbs_queued = false;
+
+	list_for_each_entry(req, &ep->queue, list) {
+		if (ep->ring_full)
+			break;
+
+		if (tegra_xudc_queue_trbs(ep, req) > 0)
+			trbs_queued = true;
+	}
+
+	if (trbs_queued)
+		tegra_xudc_ep_ring_doorbell(ep);
+}
+
+static int
+__tegra_xudc_ep_queue(struct tegra_xudc_ep *ep, struct tegra_xudc_request *req)
+{
+	struct tegra_xudc *xudc = ep->xudc;
+	int err;
+
+	if (usb_endpoint_xfer_control(ep->desc) && !list_empty(&ep->queue)) {
+		dev_err(xudc->dev, "control EP has pending transfers\n");
+		return -EINVAL;
+	}
+
+	if (usb_endpoint_xfer_control(ep->desc)) {
+		err = usb_gadget_map_request(&xudc->gadget, &req->usb_req,
+					     (xudc->setup_state ==
+					      DATA_STAGE_XFER));
+	} else {
+		err = usb_gadget_map_request(&xudc->gadget, &req->usb_req,
+					     usb_endpoint_dir_in(ep->desc));
+	}
+
+	if (err < 0) {
+		dev_err(xudc->dev, "failed to map request: %d\n", err);
+		return err;
+	}
+
+	req->first_trb = NULL;
+	req->last_trb = NULL;
+	req->buf_queued = 0;
+	req->trbs_queued = 0;
+	req->need_zlp = false;
+	req->trbs_needed = DIV_ROUND_UP(req->usb_req.length,
+					XUDC_TRB_MAX_BUFFER_SIZE);
+	if (req->usb_req.length == 0)
+		req->trbs_needed++;
+
+	if (!usb_endpoint_xfer_isoc(ep->desc) &&
+	    req->usb_req.zero && req->usb_req.length &&
+	    ((req->usb_req.length % ep->usb_ep.maxpacket) == 0)) {
+		req->trbs_needed++;
+		req->need_zlp = true;
+	}
+
+	req->usb_req.status = -EINPROGRESS;
+	req->usb_req.actual = 0;
+
+	list_add_tail(&req->list, &ep->queue);
+
+	tegra_xudc_ep_kick_queue(ep);
+
+	return 0;
+}
+
+static int
+tegra_xudc_ep_queue(struct usb_ep *usb_ep, struct usb_request *usb_req,
+		    gfp_t gfp)
+{
+	struct tegra_xudc_request *req;
+	struct tegra_xudc_ep *ep;
+	struct tegra_xudc *xudc;
+	unsigned long flags;
+	int ret;
+
+	if (!usb_ep || !usb_req)
+		return -EINVAL;
+
+	ep = to_xudc_ep(usb_ep);
+	req = to_xudc_req(usb_req);
+	xudc = ep->xudc;
+
+	spin_lock_irqsave(&xudc->lock, flags);
+	if (xudc->powergated || !ep->desc) {
+		ret = -ESHUTDOWN;
+		goto unlock;
+	}
+
+	ret = __tegra_xudc_ep_queue(ep, req);
+unlock:
+	spin_unlock_irqrestore(&xudc->lock, flags);
+
+	return ret;
+}
+
+static void squeeze_transfer_ring(struct tegra_xudc_ep *ep,
+				  struct tegra_xudc_request *req)
+{
+	struct tegra_xudc_trb *trb = req->first_trb;
+	bool pcs_enq = trb_read_cycle(trb);
+	bool pcs;
+
+	/*
+	 * Clear out all the TRBs part of or after the cancelled request,
+	 * and must correct trb cycle bit to the last un-enqueued state.
+	 */
+	while (trb != &ep->transfer_ring[ep->enq_ptr]) {
+		pcs = trb_read_cycle(trb);
+		memset(trb, 0, sizeof(*trb));
+		trb_write_cycle(trb, !pcs);
+		trb++;
+
+		if (trb_read_type(trb) == TRB_TYPE_LINK)
+			trb = ep->transfer_ring;
+	}
+
+	/* Requests will be re-queued at the start of the cancelled request. */
+	ep->enq_ptr = req->first_trb - ep->transfer_ring;
+	/*
+	 * Retrieve the correct cycle bit state from the first trb of
+	 * the cancelled request.
+	 */
+	ep->pcs = pcs_enq;
+	ep->ring_full = false;
+	list_for_each_entry_continue(req, &ep->queue, list) {
+		req->usb_req.status = -EINPROGRESS;
+		req->usb_req.actual = 0;
+
+		req->first_trb = NULL;
+		req->last_trb = NULL;
+		req->buf_queued = 0;
+		req->trbs_queued = 0;
+	}
+}
+
+/*
+ * Determine if the given TRB is in the range [first trb, last trb] for the
+ * given request.
+ */
+static bool trb_in_request(struct tegra_xudc_ep *ep,
+			   struct tegra_xudc_request *req,
+			   struct tegra_xudc_trb *trb)
+{
+	dev_dbg(ep->xudc->dev, "%s: request %p -> %p; trb %p\n", __func__,
+		req->first_trb, req->last_trb, trb);
+
+	if (trb >= req->first_trb && (trb <= req->last_trb ||
+				      req->last_trb < req->first_trb))
+		return true;
+
+	if (trb < req->first_trb && trb <= req->last_trb &&
+	    req->last_trb < req->first_trb)
+		return true;
+
+	return false;
+}
+
+/*
+ * Determine if the given TRB is in the range [EP enqueue pointer, first TRB)
+ * for the given endpoint and request.
+ */
+static bool trb_before_request(struct tegra_xudc_ep *ep,
+			       struct tegra_xudc_request *req,
+			       struct tegra_xudc_trb *trb)
+{
+	struct tegra_xudc_trb *enq_trb = &ep->transfer_ring[ep->enq_ptr];
+
+	dev_dbg(ep->xudc->dev, "%s: request %p -> %p; enq ptr: %p; trb %p\n",
+		__func__, req->first_trb, req->last_trb, enq_trb, trb);
+
+	if (trb < req->first_trb && (enq_trb <= trb ||
+				     req->first_trb < enq_trb))
+		return true;
+
+	if (trb > req->first_trb && req->first_trb < enq_trb && enq_trb <= trb)
+		return true;
+
+	return false;
+}
+
+static int
+__tegra_xudc_ep_dequeue(struct tegra_xudc_ep *ep,
+			struct tegra_xudc_request *req)
+{
+	struct tegra_xudc *xudc = ep->xudc;
+	struct tegra_xudc_request *r = NULL, *iter;
+	struct tegra_xudc_trb *deq_trb;
+	bool busy, kick_queue = false;
+	int ret = 0;
+
+	/* Make sure the request is actually queued to this endpoint. */
+	list_for_each_entry(iter, &ep->queue, list) {
+		if (iter != req)
+			continue;
+		r = iter;
+		break;
+	}
+
+	if (!r)
+		return -EINVAL;
+
+	/* Request hasn't been queued in the transfer ring yet. */
+	if (!req->trbs_queued) {
+		tegra_xudc_req_done(ep, req, -ECONNRESET);
+		return 0;
+	}
+
+	/* Halt DMA for this endpoint. */
+	if (ep_ctx_read_state(ep->context) == EP_STATE_RUNNING) {
+		ep_pause(xudc, ep->index);
+		ep_wait_for_inactive(xudc, ep->index);
+	}
+
+	deq_trb = trb_phys_to_virt(ep, ep_ctx_read_deq_ptr(ep->context));
+	/* Is the hardware processing the TRB at the dequeue pointer? */
+	busy = (trb_read_cycle(deq_trb) == ep_ctx_read_dcs(ep->context));
+
+	if (trb_in_request(ep, req, deq_trb) && busy) {
+		/*
+		 * Request has been partially completed or it hasn't
+		 * started processing yet.
+		 */
+		dma_addr_t deq_ptr;
+
+		squeeze_transfer_ring(ep, req);
+
+		req->usb_req.actual = ep_ctx_read_edtla(ep->context);
+		tegra_xudc_req_done(ep, req, -ECONNRESET);
+		kick_queue = true;
+
+		/* EDTLA is > 0: request has been partially completed */
+		if (req->usb_req.actual > 0) {
+			/*
+			 * Abort the pending transfer and update the dequeue
+			 * pointer
+			 */
+			ep_ctx_write_edtla(ep->context, 0);
+			ep_ctx_write_partial_td(ep->context, 0);
+			ep_ctx_write_data_offset(ep->context, 0);
+
+			deq_ptr = trb_virt_to_phys(ep,
+					&ep->transfer_ring[ep->enq_ptr]);
+
+			if (dma_mapping_error(xudc->dev, deq_ptr)) {
+				ret = -EINVAL;
+			} else {
+				ep_ctx_write_deq_ptr(ep->context, deq_ptr);
+				ep_ctx_write_dcs(ep->context, ep->pcs);
+				ep_reload(xudc, ep->index);
+			}
+		}
+	} else if (trb_before_request(ep, req, deq_trb) && busy) {
+		/* Request hasn't started processing yet. */
+		squeeze_transfer_ring(ep, req);
+
+		tegra_xudc_req_done(ep, req, -ECONNRESET);
+		kick_queue = true;
+	} else {
+		/*
+		 * Request has completed, but we haven't processed the
+		 * completion event yet.
+		 */
+		tegra_xudc_req_done(ep, req, -ECONNRESET);
+		ret = -EINVAL;
+	}
+
+	/* Resume the endpoint. */
+	ep_unpause(xudc, ep->index);
+
+	if (kick_queue)
+		tegra_xudc_ep_kick_queue(ep);
+
+	return ret;
+}
+
+static int
+tegra_xudc_ep_dequeue(struct usb_ep *usb_ep, struct usb_request *usb_req)
+{
+	struct tegra_xudc_request *req;
+	struct tegra_xudc_ep *ep;
+	struct tegra_xudc *xudc;
+	unsigned long flags;
+	int ret;
+
+	if (!usb_ep || !usb_req)
+		return -EINVAL;
+
+	ep = to_xudc_ep(usb_ep);
+	req = to_xudc_req(usb_req);
+	xudc = ep->xudc;
+
+	spin_lock_irqsave(&xudc->lock, flags);
+
+	if (xudc->powergated || !ep->desc) {
+		ret = -ESHUTDOWN;
+		goto unlock;
+	}
+
+	ret = __tegra_xudc_ep_dequeue(ep, req);
+unlock:
+	spin_unlock_irqrestore(&xudc->lock, flags);
+
+	return ret;
+}
+
+static int __tegra_xudc_ep_set_halt(struct tegra_xudc_ep *ep, bool halt)
+{
+	struct tegra_xudc *xudc = ep->xudc;
+
+	if (!ep->desc)
+		return -EINVAL;
+
+	if (usb_endpoint_xfer_isoc(ep->desc)) {
+		dev_err(xudc->dev, "can't halt isochronous EP\n");
+		return -ENOTSUPP;
+	}
+
+	if (!!(xudc_readl(xudc, EP_HALT) & BIT(ep->index)) == halt) {
+		dev_dbg(xudc->dev, "EP %u already %s\n", ep->index,
+			halt ? "halted" : "not halted");
+		return 0;
+	}
+
+	if (halt) {
+		ep_halt(xudc, ep->index);
+	} else {
+		ep_ctx_write_state(ep->context, EP_STATE_DISABLED);
+
+		ep_reload(xudc, ep->index);
+
+		ep_ctx_write_state(ep->context, EP_STATE_RUNNING);
+		ep_ctx_write_rsvd(ep->context, 0);
+		ep_ctx_write_partial_td(ep->context, 0);
+		ep_ctx_write_splitxstate(ep->context, 0);
+		ep_ctx_write_seq_num(ep->context, 0);
+
+		ep_reload(xudc, ep->index);
+		ep_unpause(xudc, ep->index);
+		ep_unhalt(xudc, ep->index);
+
+		tegra_xudc_ep_ring_doorbell(ep);
+	}
+
+	return 0;
+}
+
+static int tegra_xudc_ep_set_halt(struct usb_ep *usb_ep, int value)
+{
+	struct tegra_xudc_ep *ep;
+	struct tegra_xudc *xudc;
+	unsigned long flags;
+	int ret;
+
+	if (!usb_ep)
+		return -EINVAL;
+
+	ep = to_xudc_ep(usb_ep);
+	xudc = ep->xudc;
+
+	spin_lock_irqsave(&xudc->lock, flags);
+	if (xudc->powergated) {
+		ret = -ESHUTDOWN;
+		goto unlock;
+	}
+
+	if (value && usb_endpoint_dir_in(ep->desc) &&
+	    !list_empty(&ep->queue)) {
+		dev_err(xudc->dev, "can't halt EP with requests pending\n");
+		ret = -EAGAIN;
+		goto unlock;
+	}
+
+	ret = __tegra_xudc_ep_set_halt(ep, value);
+unlock:
+	spin_unlock_irqrestore(&xudc->lock, flags);
+
+	return ret;
+}
+
+static void tegra_xudc_ep_context_setup(struct tegra_xudc_ep *ep)
+{
+	const struct usb_endpoint_descriptor *desc = ep->desc;
+	const struct usb_ss_ep_comp_descriptor *comp_desc = ep->comp_desc;
+	struct tegra_xudc *xudc = ep->xudc;
+	u16 maxpacket, maxburst = 0, esit = 0;
+	u32 val;
+
+	maxpacket = usb_endpoint_maxp(desc);
+	if (xudc->gadget.speed == USB_SPEED_SUPER) {
+		if (!usb_endpoint_xfer_control(desc))
+			maxburst = comp_desc->bMaxBurst;
+
+		if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc))
+			esit = le16_to_cpu(comp_desc->wBytesPerInterval);
+	} else if ((xudc->gadget.speed < USB_SPEED_SUPER) &&
+		   (usb_endpoint_xfer_int(desc) ||
+		    usb_endpoint_xfer_isoc(desc))) {
+		if (xudc->gadget.speed == USB_SPEED_HIGH) {
+			maxburst = usb_endpoint_maxp_mult(desc) - 1;
+			if (maxburst == 0x3) {
+				dev_warn(xudc->dev,
+					 "invalid endpoint maxburst\n");
+				maxburst = 0x2;
+			}
+		}
+		esit = maxpacket * (maxburst + 1);
+	}
+
+	memset(ep->context, 0, sizeof(*ep->context));
+
+	ep_ctx_write_state(ep->context, EP_STATE_RUNNING);
+	ep_ctx_write_interval(ep->context, desc->bInterval);
+	if (xudc->gadget.speed == USB_SPEED_SUPER) {
+		if (usb_endpoint_xfer_isoc(desc)) {
+			ep_ctx_write_mult(ep->context,
+					  comp_desc->bmAttributes & 0x3);
+		}
+
+		if (usb_endpoint_xfer_bulk(desc)) {
+			ep_ctx_write_max_pstreams(ep->context,
+						  comp_desc->bmAttributes &
+						  0x1f);
+			ep_ctx_write_lsa(ep->context, 1);
+		}
+	}
+
+	if (!usb_endpoint_xfer_control(desc) && usb_endpoint_dir_out(desc))
+		val = usb_endpoint_type(desc);
+	else
+		val = usb_endpoint_type(desc) + EP_TYPE_CONTROL;
+
+	ep_ctx_write_type(ep->context, val);
+	ep_ctx_write_cerr(ep->context, 0x3);
+	ep_ctx_write_max_packet_size(ep->context, maxpacket);
+	ep_ctx_write_max_burst_size(ep->context, maxburst);
+
+	ep_ctx_write_deq_ptr(ep->context, ep->transfer_ring_phys);
+	ep_ctx_write_dcs(ep->context, ep->pcs);
+
+	/* Select a reasonable average TRB length based on endpoint type. */
+	switch (usb_endpoint_type(desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		val = 8;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		val = 1024;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_ISOC:
+	default:
+		val = 3072;
+		break;
+	}
+
+	ep_ctx_write_avg_trb_len(ep->context, val);
+	ep_ctx_write_max_esit_payload(ep->context, esit);
+
+	ep_ctx_write_cerrcnt(ep->context, 0x3);
+}
+
+static void setup_link_trb(struct tegra_xudc_ep *ep,
+			   struct tegra_xudc_trb *trb)
+{
+	trb_write_data_ptr(trb, ep->transfer_ring_phys);
+	trb_write_type(trb, TRB_TYPE_LINK);
+	trb_write_toggle_cycle(trb, 1);
+}
+
+static int __tegra_xudc_ep_disable(struct tegra_xudc_ep *ep)
+{
+	struct tegra_xudc *xudc = ep->xudc;
+
+	if (ep_ctx_read_state(ep->context) == EP_STATE_DISABLED) {
+		dev_err(xudc->dev, "endpoint %u already disabled\n",
+			ep->index);
+		return -EINVAL;
+	}
+
+	ep_ctx_write_state(ep->context, EP_STATE_DISABLED);
+
+	ep_reload(xudc, ep->index);
+
+	tegra_xudc_ep_nuke(ep, -ESHUTDOWN);
+
+	xudc->nr_enabled_eps--;
+	if (usb_endpoint_xfer_isoc(ep->desc))
+		xudc->nr_isoch_eps--;
+
+	ep->desc = NULL;
+	ep->comp_desc = NULL;
+
+	memset(ep->context, 0, sizeof(*ep->context));
+
+	ep_unpause(xudc, ep->index);
+	ep_unhalt(xudc, ep->index);
+	if (xudc_readl(xudc, EP_STOPPED) & BIT(ep->index))
+		xudc_writel(xudc, BIT(ep->index), EP_STOPPED);
+
+	/*
+	 * If this is the last endpoint disabled in a de-configure request,
+	 * switch back to address state.
+	 */
+	if ((xudc->device_state == USB_STATE_CONFIGURED) &&
+	    (xudc->nr_enabled_eps == 1)) {
+		u32 val;
+
+		xudc->device_state = USB_STATE_ADDRESS;
+		usb_gadget_set_state(&xudc->gadget, xudc->device_state);
+
+		val = xudc_readl(xudc, CTRL);
+		val &= ~CTRL_RUN;
+		xudc_writel(xudc, val, CTRL);
+	}
+
+	dev_info(xudc->dev, "ep %u disabled\n", ep->index);
+
+	return 0;
+}
+
+static int tegra_xudc_ep_disable(struct usb_ep *usb_ep)
+{
+	struct tegra_xudc_ep *ep;
+	struct tegra_xudc *xudc;
+	unsigned long flags;
+	int ret;
+
+	if (!usb_ep)
+		return -EINVAL;
+
+	ep = to_xudc_ep(usb_ep);
+	xudc = ep->xudc;
+
+	spin_lock_irqsave(&xudc->lock, flags);
+	if (xudc->powergated) {
+		ret = -ESHUTDOWN;
+		goto unlock;
+	}
+
+	ret = __tegra_xudc_ep_disable(ep);
+unlock:
+	spin_unlock_irqrestore(&xudc->lock, flags);
+
+	return ret;
+}
+
+static int __tegra_xudc_ep_enable(struct tegra_xudc_ep *ep,
+				  const struct usb_endpoint_descriptor *desc)
+{
+	struct tegra_xudc *xudc = ep->xudc;
+	unsigned int i;
+	u32 val;
+
+	if (xudc->gadget.speed == USB_SPEED_SUPER &&
+		!usb_endpoint_xfer_control(desc) && !ep->usb_ep.comp_desc)
+		return -EINVAL;
+
+	/* Disable the EP if it is not disabled */
+	if (ep_ctx_read_state(ep->context) != EP_STATE_DISABLED)
+		__tegra_xudc_ep_disable(ep);
+
+	ep->desc = desc;
+	ep->comp_desc = ep->usb_ep.comp_desc;
+
+	if (usb_endpoint_xfer_isoc(desc)) {
+		if (xudc->nr_isoch_eps > XUDC_MAX_ISOCH_EPS) {
+			dev_err(xudc->dev, "too many isochronous endpoints\n");
+			return -EBUSY;
+		}
+		xudc->nr_isoch_eps++;
+	}
+
+	memset(ep->transfer_ring, 0, XUDC_TRANSFER_RING_SIZE *
+	       sizeof(*ep->transfer_ring));
+	setup_link_trb(ep, &ep->transfer_ring[XUDC_TRANSFER_RING_SIZE - 1]);
+
+	ep->enq_ptr = 0;
+	ep->deq_ptr = 0;
+	ep->pcs = true;
+	ep->ring_full = false;
+	xudc->nr_enabled_eps++;
+
+	tegra_xudc_ep_context_setup(ep);
+
+	/*
+	 * No need to reload and un-halt EP0.  This will be done automatically
+	 * once a valid SETUP packet is received.
+	 */
+	if (usb_endpoint_xfer_control(desc))
+		goto out;
+
+	/*
+	 * Transition to configured state once the first non-control
+	 * endpoint is enabled.
+	 */
+	if (xudc->device_state == USB_STATE_ADDRESS) {
+		val = xudc_readl(xudc, CTRL);
+		val |= CTRL_RUN;
+		xudc_writel(xudc, val, CTRL);
+
+		xudc->device_state = USB_STATE_CONFIGURED;
+		usb_gadget_set_state(&xudc->gadget, xudc->device_state);
+	}
+
+	if (usb_endpoint_xfer_isoc(desc)) {
+		/*
+		 * Pause all bulk endpoints when enabling an isoch endpoint
+		 * to ensure the isoch endpoint is allocated enough bandwidth.
+		 */
+		for (i = 0; i < ARRAY_SIZE(xudc->ep); i++) {
+			if (xudc->ep[i].desc &&
+			    usb_endpoint_xfer_bulk(xudc->ep[i].desc))
+				ep_pause(xudc, i);
+		}
+	}
+
+	ep_reload(xudc, ep->index);
+	ep_unpause(xudc, ep->index);
+	ep_unhalt(xudc, ep->index);
+
+	if (usb_endpoint_xfer_isoc(desc)) {
+		for (i = 0; i < ARRAY_SIZE(xudc->ep); i++) {
+			if (xudc->ep[i].desc &&
+			    usb_endpoint_xfer_bulk(xudc->ep[i].desc))
+				ep_unpause(xudc, i);
+		}
+	}
+
+out:
+	dev_info(xudc->dev, "EP %u (type: %s, dir: %s) enabled\n", ep->index,
+		 usb_ep_type_string(usb_endpoint_type(ep->desc)),
+		 usb_endpoint_dir_in(ep->desc) ? "in" : "out");
+
+	return 0;
+}
+
+static int tegra_xudc_ep_enable(struct usb_ep *usb_ep,
+				const struct usb_endpoint_descriptor *desc)
+{
+	struct tegra_xudc_ep *ep;
+	struct tegra_xudc *xudc;
+	unsigned long flags;
+	int ret;
+
+	if  (!usb_ep || !desc || (desc->bDescriptorType != USB_DT_ENDPOINT))
+		return -EINVAL;
+
+	ep = to_xudc_ep(usb_ep);
+	xudc = ep->xudc;
+
+	spin_lock_irqsave(&xudc->lock, flags);
+	if (xudc->powergated) {
+		ret = -ESHUTDOWN;
+		goto unlock;
+	}
+
+	ret = __tegra_xudc_ep_enable(ep, desc);
+unlock:
+	spin_unlock_irqrestore(&xudc->lock, flags);
+
+	return ret;
+}
+
+static struct usb_request *
+tegra_xudc_ep_alloc_request(struct usb_ep *usb_ep, gfp_t gfp)
+{
+	struct tegra_xudc_request *req;
+
+	req = kzalloc(sizeof(*req), gfp);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->list);
+
+	return &req->usb_req;
+}
+
+static void tegra_xudc_ep_free_request(struct usb_ep *usb_ep,
+				       struct usb_request *usb_req)
+{
+	struct tegra_xudc_request *req = to_xudc_req(usb_req);
+
+	kfree(req);
+}
+
+static const struct usb_ep_ops tegra_xudc_ep_ops = {
+	.enable = tegra_xudc_ep_enable,
+	.disable = tegra_xudc_ep_disable,
+	.alloc_request = tegra_xudc_ep_alloc_request,
+	.free_request = tegra_xudc_ep_free_request,
+	.queue = tegra_xudc_ep_queue,
+	.dequeue = tegra_xudc_ep_dequeue,
+	.set_halt = tegra_xudc_ep_set_halt,
+};
+
+static int tegra_xudc_ep0_enable(struct usb_ep *usb_ep,
+				 const struct usb_endpoint_descriptor *desc)
+{
+	return -EBUSY;
+}
+
+static int tegra_xudc_ep0_disable(struct usb_ep *usb_ep)
+{
+	return -EBUSY;
+}
+
+static const struct usb_ep_ops tegra_xudc_ep0_ops = {
+	.enable = tegra_xudc_ep0_enable,
+	.disable = tegra_xudc_ep0_disable,
+	.alloc_request = tegra_xudc_ep_alloc_request,
+	.free_request = tegra_xudc_ep_free_request,
+	.queue = tegra_xudc_ep_queue,
+	.dequeue = tegra_xudc_ep_dequeue,
+	.set_halt = tegra_xudc_ep_set_halt,
+};
+
+static int tegra_xudc_gadget_get_frame(struct usb_gadget *gadget)
+{
+	struct tegra_xudc *xudc = to_xudc(gadget);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&xudc->lock, flags);
+	if (xudc->powergated) {
+		ret = -ESHUTDOWN;
+		goto unlock;
+	}
+
+	ret = (xudc_readl(xudc, MFINDEX) & MFINDEX_FRAME_MASK) >>
+		MFINDEX_FRAME_SHIFT;
+unlock:
+	spin_unlock_irqrestore(&xudc->lock, flags);
+
+	return ret;
+}
+
+static void tegra_xudc_resume_device_state(struct tegra_xudc *xudc)
+{
+	unsigned int i;
+	u32 val;
+
+	ep_unpause_all(xudc);
+
+	/* Direct link to U0. */
+	val = xudc_readl(xudc, PORTSC);
+	if (((val & PORTSC_PLS_MASK) >> PORTSC_PLS_SHIFT) != PORTSC_PLS_U0) {
+		val &= ~(PORTSC_CHANGE_MASK | PORTSC_PLS_MASK);
+		val |= PORTSC_LWS | PORTSC_PLS(PORTSC_PLS_U0);
+		xudc_writel(xudc, val, PORTSC);
+	}
+
+	if (xudc->device_state == USB_STATE_SUSPENDED) {
+		xudc->device_state = xudc->resume_state;
+		usb_gadget_set_state(&xudc->gadget, xudc->device_state);
+		xudc->resume_state = 0;
+	}
+
+	/*
+	 * Doorbells may be dropped if they are sent too soon (< ~200ns)
+	 * after unpausing the endpoint.  Wait for 500ns just to be safe.
+	 */
+	ndelay(500);
+	for (i = 0; i < ARRAY_SIZE(xudc->ep); i++)
+		tegra_xudc_ep_ring_doorbell(&xudc->ep[i]);
+}
+
+static int tegra_xudc_gadget_wakeup(struct usb_gadget *gadget)
+{
+	struct tegra_xudc *xudc = to_xudc(gadget);
+	unsigned long flags;
+	int ret = 0;
+	u32 val;
+
+	spin_lock_irqsave(&xudc->lock, flags);
+
+	if (xudc->powergated) {
+		ret = -ESHUTDOWN;
+		goto unlock;
+	}
+	val = xudc_readl(xudc, PORTPM);
+	dev_dbg(xudc->dev, "%s: PORTPM=%#x, speed=%x\n", __func__,
+			val, gadget->speed);
+
+	if (((xudc->gadget.speed <= USB_SPEED_HIGH) &&
+	     (val & PORTPM_RWE)) ||
+	    ((xudc->gadget.speed == USB_SPEED_SUPER) &&
+	     (val & PORTPM_FRWE))) {
+		tegra_xudc_resume_device_state(xudc);
+
+		/* Send Device Notification packet. */
+		if (xudc->gadget.speed == USB_SPEED_SUPER) {
+			val = DEVNOTIF_LO_TYPE(DEVNOTIF_LO_TYPE_FUNCTION_WAKE)
+					     | DEVNOTIF_LO_TRIG;
+			xudc_writel(xudc, 0, DEVNOTIF_HI);
+			xudc_writel(xudc, val, DEVNOTIF_LO);
+		}
+	}
+
+unlock:
+	dev_dbg(xudc->dev, "%s: ret value is %d", __func__, ret);
+	spin_unlock_irqrestore(&xudc->lock, flags);
+
+	return ret;
+}
+
+static int tegra_xudc_gadget_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct tegra_xudc *xudc = to_xudc(gadget);
+	unsigned long flags;
+	u32 val;
+
+	pm_runtime_get_sync(xudc->dev);
+
+	spin_lock_irqsave(&xudc->lock, flags);
+
+	if (is_on != xudc->pullup) {
+		val = xudc_readl(xudc, CTRL);
+		if (is_on)
+			val |= CTRL_ENABLE;
+		else
+			val &= ~CTRL_ENABLE;
+		xudc_writel(xudc, val, CTRL);
+	}
+
+	xudc->pullup = is_on;
+	dev_dbg(xudc->dev, "%s: pullup:%d", __func__, is_on);
+
+	spin_unlock_irqrestore(&xudc->lock, flags);
+
+	pm_runtime_put(xudc->dev);
+
+	return 0;
+}
+
+static int tegra_xudc_gadget_start(struct usb_gadget *gadget,
+				   struct usb_gadget_driver *driver)
+{
+	struct tegra_xudc *xudc = to_xudc(gadget);
+	unsigned long flags;
+	u32 val;
+	int ret;
+	unsigned int i;
+
+	if (!driver)
+		return -EINVAL;
+
+	pm_runtime_get_sync(xudc->dev);
+
+	spin_lock_irqsave(&xudc->lock, flags);
+
+	if (xudc->driver) {
+		ret = -EBUSY;
+		goto unlock;
+	}
+
+	xudc->setup_state = WAIT_FOR_SETUP;
+	xudc->device_state = USB_STATE_DEFAULT;
+	usb_gadget_set_state(&xudc->gadget, xudc->device_state);
+
+	ret = __tegra_xudc_ep_enable(&xudc->ep[0], &tegra_xudc_ep0_desc);
+	if (ret < 0)
+		goto unlock;
+
+	val = xudc_readl(xudc, CTRL);
+	val |= CTRL_IE | CTRL_LSE;
+	xudc_writel(xudc, val, CTRL);
+
+	val = xudc_readl(xudc, PORTHALT);
+	val |= PORTHALT_STCHG_INTR_EN;
+	xudc_writel(xudc, val, PORTHALT);
+
+	if (xudc->pullup) {
+		val = xudc_readl(xudc, CTRL);
+		val |= CTRL_ENABLE;
+		xudc_writel(xudc, val, CTRL);
+	}
+
+	for (i = 0; i < xudc->soc->num_phys; i++)
+		if (xudc->usbphy[i])
+			otg_set_peripheral(xudc->usbphy[i]->otg, gadget);
+
+	xudc->driver = driver;
+unlock:
+	dev_dbg(xudc->dev, "%s: ret value is %d", __func__, ret);
+	spin_unlock_irqrestore(&xudc->lock, flags);
+
+	pm_runtime_put(xudc->dev);
+
+	return ret;
+}
+
+static int tegra_xudc_gadget_stop(struct usb_gadget *gadget)
+{
+	struct tegra_xudc *xudc = to_xudc(gadget);
+	unsigned long flags;
+	u32 val;
+	unsigned int i;
+
+	pm_runtime_get_sync(xudc->dev);
+
+	spin_lock_irqsave(&xudc->lock, flags);
+
+	for (i = 0; i < xudc->soc->num_phys; i++)
+		if (xudc->usbphy[i])
+			otg_set_peripheral(xudc->usbphy[i]->otg, NULL);
+
+	val = xudc_readl(xudc, CTRL);
+	val &= ~(CTRL_IE | CTRL_ENABLE);
+	xudc_writel(xudc, val, CTRL);
+
+	__tegra_xudc_ep_disable(&xudc->ep[0]);
+
+	xudc->driver = NULL;
+	dev_dbg(xudc->dev, "Gadget stopped");
+
+	spin_unlock_irqrestore(&xudc->lock, flags);
+
+	pm_runtime_put(xudc->dev);
+
+	return 0;
+}
+
+static int tegra_xudc_gadget_vbus_draw(struct usb_gadget *gadget,
+						unsigned int m_a)
+{
+	int ret = 0;
+	struct tegra_xudc *xudc = to_xudc(gadget);
+
+	dev_dbg(xudc->dev, "%s: %u mA\n", __func__, m_a);
+
+	if (xudc->curr_usbphy && xudc->curr_usbphy->chg_type == SDP_TYPE)
+		ret = usb_phy_set_power(xudc->curr_usbphy, m_a);
+
+	return ret;
+}
+
+static int tegra_xudc_set_selfpowered(struct usb_gadget *gadget, int is_on)
+{
+	struct tegra_xudc *xudc = to_xudc(gadget);
+
+	dev_dbg(xudc->dev, "%s: %d\n", __func__, is_on);
+	xudc->selfpowered = !!is_on;
+
+	return 0;
+}
+
+static const struct usb_gadget_ops tegra_xudc_gadget_ops = {
+	.get_frame = tegra_xudc_gadget_get_frame,
+	.wakeup = tegra_xudc_gadget_wakeup,
+	.pullup = tegra_xudc_gadget_pullup,
+	.udc_start = tegra_xudc_gadget_start,
+	.udc_stop = tegra_xudc_gadget_stop,
+	.vbus_draw = tegra_xudc_gadget_vbus_draw,
+	.set_selfpowered = tegra_xudc_set_selfpowered,
+};
+
+static void no_op_complete(struct usb_ep *ep, struct usb_request *req)
+{
+}
+
+static int
+tegra_xudc_ep0_queue_status(struct tegra_xudc *xudc,
+		void (*cmpl)(struct usb_ep *, struct usb_request *))
+{
+	xudc->ep0_req->usb_req.buf = NULL;
+	xudc->ep0_req->usb_req.dma = 0;
+	xudc->ep0_req->usb_req.length = 0;
+	xudc->ep0_req->usb_req.complete = cmpl;
+	xudc->ep0_req->usb_req.context = xudc;
+
+	return __tegra_xudc_ep_queue(&xudc->ep[0], xudc->ep0_req);
+}
+
+static int
+tegra_xudc_ep0_queue_data(struct tegra_xudc *xudc, void *buf, size_t len,
+		void (*cmpl)(struct usb_ep *, struct usb_request *))
+{
+	xudc->ep0_req->usb_req.buf = buf;
+	xudc->ep0_req->usb_req.length = len;
+	xudc->ep0_req->usb_req.complete = cmpl;
+	xudc->ep0_req->usb_req.context = xudc;
+
+	return __tegra_xudc_ep_queue(&xudc->ep[0], xudc->ep0_req);
+}
+
+static void tegra_xudc_ep0_req_done(struct tegra_xudc *xudc)
+{
+	switch (xudc->setup_state) {
+	case DATA_STAGE_XFER:
+		xudc->setup_state = STATUS_STAGE_RECV;
+		tegra_xudc_ep0_queue_status(xudc, no_op_complete);
+		break;
+	case DATA_STAGE_RECV:
+		xudc->setup_state = STATUS_STAGE_XFER;
+		tegra_xudc_ep0_queue_status(xudc, no_op_complete);
+		break;
+	default:
+		xudc->setup_state = WAIT_FOR_SETUP;
+		break;
+	}
+}
+
+static int tegra_xudc_ep0_delegate_req(struct tegra_xudc *xudc,
+				       struct usb_ctrlrequest *ctrl)
+{
+	int ret;
+
+	spin_unlock(&xudc->lock);
+	ret = xudc->driver->setup(&xudc->gadget, ctrl);
+	spin_lock(&xudc->lock);
+
+	return ret;
+}
+
+static void set_feature_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct tegra_xudc *xudc = req->context;
+
+	if (xudc->test_mode_pattern) {
+		xudc_writel(xudc, xudc->test_mode_pattern, PORT_TM);
+		xudc->test_mode_pattern = 0;
+	}
+}
+
+static int tegra_xudc_ep0_set_feature(struct tegra_xudc *xudc,
+				      struct usb_ctrlrequest *ctrl)
+{
+	bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
+	u32 feature = le16_to_cpu(ctrl->wValue);
+	u32 index = le16_to_cpu(ctrl->wIndex);
+	u32 val, ep;
+	int ret;
+
+	if (le16_to_cpu(ctrl->wLength) != 0)
+		return -EINVAL;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		switch (feature) {
+		case USB_DEVICE_REMOTE_WAKEUP:
+			if ((xudc->gadget.speed == USB_SPEED_SUPER) ||
+			    (xudc->device_state == USB_STATE_DEFAULT))
+				return -EINVAL;
+
+			val = xudc_readl(xudc, PORTPM);
+			if (set)
+				val |= PORTPM_RWE;
+			else
+				val &= ~PORTPM_RWE;
+
+			xudc_writel(xudc, val, PORTPM);
+			break;
+		case USB_DEVICE_U1_ENABLE:
+		case USB_DEVICE_U2_ENABLE:
+			if ((xudc->device_state != USB_STATE_CONFIGURED) ||
+			    (xudc->gadget.speed != USB_SPEED_SUPER))
+				return -EINVAL;
+
+			val = xudc_readl(xudc, PORTPM);
+			if ((feature == USB_DEVICE_U1_ENABLE) &&
+			     xudc->soc->u1_enable) {
+				if (set)
+					val |= PORTPM_U1E;
+				else
+					val &= ~PORTPM_U1E;
+			}
+
+			if ((feature == USB_DEVICE_U2_ENABLE) &&
+			     xudc->soc->u2_enable) {
+				if (set)
+					val |= PORTPM_U2E;
+				else
+					val &= ~PORTPM_U2E;
+			}
+
+			xudc_writel(xudc, val, PORTPM);
+			break;
+		case USB_DEVICE_TEST_MODE:
+			if (xudc->gadget.speed != USB_SPEED_HIGH)
+				return -EINVAL;
+
+			if (!set)
+				return -EINVAL;
+
+			xudc->test_mode_pattern = index >> 8;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		break;
+	case USB_RECIP_INTERFACE:
+		if (xudc->device_state != USB_STATE_CONFIGURED)
+			return -EINVAL;
+
+		switch (feature) {
+		case USB_INTRF_FUNC_SUSPEND:
+			if (set) {
+				val = xudc_readl(xudc, PORTPM);
+
+				if (index & USB_INTRF_FUNC_SUSPEND_RW)
+					val |= PORTPM_FRWE;
+				else
+					val &= ~PORTPM_FRWE;
+
+				xudc_writel(xudc, val, PORTPM);
+			}
+
+			return tegra_xudc_ep0_delegate_req(xudc, ctrl);
+		default:
+			return -EINVAL;
+		}
+
+		break;
+	case USB_RECIP_ENDPOINT:
+		ep = (index & USB_ENDPOINT_NUMBER_MASK) * 2 +
+			((index & USB_DIR_IN) ? 1 : 0);
+
+		if ((xudc->device_state == USB_STATE_DEFAULT) ||
+		    ((xudc->device_state == USB_STATE_ADDRESS) &&
+		     (index != 0)))
+			return -EINVAL;
+
+		ret = __tegra_xudc_ep_set_halt(&xudc->ep[ep], set);
+		if (ret < 0)
+			return ret;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return tegra_xudc_ep0_queue_status(xudc, set_feature_complete);
+}
+
+static int tegra_xudc_ep0_get_status(struct tegra_xudc *xudc,
+				     struct usb_ctrlrequest *ctrl)
+{
+	struct tegra_xudc_ep_context *ep_ctx;
+	u32 val, ep, index = le16_to_cpu(ctrl->wIndex);
+	u16 status = 0;
+
+	if (!(ctrl->bRequestType & USB_DIR_IN))
+		return -EINVAL;
+
+	if ((le16_to_cpu(ctrl->wValue) != 0) ||
+	    (le16_to_cpu(ctrl->wLength) != 2))
+		return -EINVAL;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		val = xudc_readl(xudc, PORTPM);
+
+		if (xudc->selfpowered)
+			status |= BIT(USB_DEVICE_SELF_POWERED);
+
+		if ((xudc->gadget.speed < USB_SPEED_SUPER) &&
+		    (val & PORTPM_RWE))
+			status |= BIT(USB_DEVICE_REMOTE_WAKEUP);
+
+		if (xudc->gadget.speed == USB_SPEED_SUPER) {
+			if (val & PORTPM_U1E)
+				status |= BIT(USB_DEV_STAT_U1_ENABLED);
+			if (val & PORTPM_U2E)
+				status |= BIT(USB_DEV_STAT_U2_ENABLED);
+		}
+		break;
+	case USB_RECIP_INTERFACE:
+		if (xudc->gadget.speed == USB_SPEED_SUPER) {
+			status |= USB_INTRF_STAT_FUNC_RW_CAP;
+			val = xudc_readl(xudc, PORTPM);
+			if (val & PORTPM_FRWE)
+				status |= USB_INTRF_STAT_FUNC_RW;
+		}
+		break;
+	case USB_RECIP_ENDPOINT:
+		ep = (index & USB_ENDPOINT_NUMBER_MASK) * 2 +
+			((index & USB_DIR_IN) ? 1 : 0);
+		ep_ctx = &xudc->ep_context[ep];
+
+		if ((xudc->device_state != USB_STATE_CONFIGURED) &&
+		    ((xudc->device_state != USB_STATE_ADDRESS) || (ep != 0)))
+			return -EINVAL;
+
+		if (ep_ctx_read_state(ep_ctx) == EP_STATE_DISABLED)
+			return -EINVAL;
+
+		if (xudc_readl(xudc, EP_HALT) & BIT(ep))
+			status |= BIT(USB_ENDPOINT_HALT);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	xudc->status_buf = cpu_to_le16(status);
+	return tegra_xudc_ep0_queue_data(xudc, &xudc->status_buf,
+					 sizeof(xudc->status_buf),
+					 no_op_complete);
+}
+
+static void set_sel_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	/* Nothing to do with SEL values */
+}
+
+static int tegra_xudc_ep0_set_sel(struct tegra_xudc *xudc,
+				  struct usb_ctrlrequest *ctrl)
+{
+	if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE |
+				     USB_TYPE_STANDARD))
+		return -EINVAL;
+
+	if (xudc->device_state == USB_STATE_DEFAULT)
+		return -EINVAL;
+
+	if ((le16_to_cpu(ctrl->wIndex) != 0) ||
+	    (le16_to_cpu(ctrl->wValue) != 0) ||
+	    (le16_to_cpu(ctrl->wLength) != 6))
+		return -EINVAL;
+
+	return tegra_xudc_ep0_queue_data(xudc, &xudc->sel_timing,
+					 sizeof(xudc->sel_timing),
+					 set_sel_complete);
+}
+
+static void set_isoch_delay_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	/* Nothing to do with isoch delay */
+}
+
+static int tegra_xudc_ep0_set_isoch_delay(struct tegra_xudc *xudc,
+					  struct usb_ctrlrequest *ctrl)
+{
+	u32 delay = le16_to_cpu(ctrl->wValue);
+
+	if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE |
+				   USB_TYPE_STANDARD))
+		return -EINVAL;
+
+	if ((delay > 65535) || (le16_to_cpu(ctrl->wIndex) != 0) ||
+	    (le16_to_cpu(ctrl->wLength) != 0))
+		return -EINVAL;
+
+	xudc->isoch_delay = delay;
+
+	return tegra_xudc_ep0_queue_status(xudc, set_isoch_delay_complete);
+}
+
+static void set_address_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct tegra_xudc *xudc = req->context;
+
+	if ((xudc->device_state == USB_STATE_DEFAULT) &&
+	    (xudc->dev_addr != 0)) {
+		xudc->device_state = USB_STATE_ADDRESS;
+		usb_gadget_set_state(&xudc->gadget, xudc->device_state);
+	} else if ((xudc->device_state == USB_STATE_ADDRESS) &&
+		   (xudc->dev_addr == 0)) {
+		xudc->device_state = USB_STATE_DEFAULT;
+		usb_gadget_set_state(&xudc->gadget, xudc->device_state);
+	}
+}
+
+static int tegra_xudc_ep0_set_address(struct tegra_xudc *xudc,
+				      struct usb_ctrlrequest *ctrl)
+{
+	struct tegra_xudc_ep *ep0 = &xudc->ep[0];
+	u32 val, addr = le16_to_cpu(ctrl->wValue);
+
+	if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE |
+				     USB_TYPE_STANDARD))
+		return -EINVAL;
+
+	if ((addr > 127) || (le16_to_cpu(ctrl->wIndex) != 0) ||
+	    (le16_to_cpu(ctrl->wLength) != 0))
+		return -EINVAL;
+
+	if (xudc->device_state == USB_STATE_CONFIGURED)
+		return -EINVAL;
+
+	dev_dbg(xudc->dev, "set address: %u\n", addr);
+
+	xudc->dev_addr = addr;
+	val = xudc_readl(xudc, CTRL);
+	val &= ~(CTRL_DEVADDR_MASK);
+	val |= CTRL_DEVADDR(addr);
+	xudc_writel(xudc, val, CTRL);
+
+	ep_ctx_write_devaddr(ep0->context, addr);
+
+	return tegra_xudc_ep0_queue_status(xudc, set_address_complete);
+}
+
+static int tegra_xudc_ep0_standard_req(struct tegra_xudc *xudc,
+				      struct usb_ctrlrequest *ctrl)
+{
+	int ret;
+
+	switch (ctrl->bRequest) {
+	case USB_REQ_GET_STATUS:
+		dev_dbg(xudc->dev, "USB_REQ_GET_STATUS\n");
+		ret = tegra_xudc_ep0_get_status(xudc, ctrl);
+		break;
+	case USB_REQ_SET_ADDRESS:
+		dev_dbg(xudc->dev, "USB_REQ_SET_ADDRESS\n");
+		ret = tegra_xudc_ep0_set_address(xudc, ctrl);
+		break;
+	case USB_REQ_SET_SEL:
+		dev_dbg(xudc->dev, "USB_REQ_SET_SEL\n");
+		ret = tegra_xudc_ep0_set_sel(xudc, ctrl);
+		break;
+	case USB_REQ_SET_ISOCH_DELAY:
+		dev_dbg(xudc->dev, "USB_REQ_SET_ISOCH_DELAY\n");
+		ret = tegra_xudc_ep0_set_isoch_delay(xudc, ctrl);
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+	case USB_REQ_SET_FEATURE:
+		dev_dbg(xudc->dev, "USB_REQ_CLEAR/SET_FEATURE\n");
+		ret = tegra_xudc_ep0_set_feature(xudc, ctrl);
+		break;
+	case USB_REQ_SET_CONFIGURATION:
+		dev_dbg(xudc->dev, "USB_REQ_SET_CONFIGURATION\n");
+		/*
+		 * In theory we need to clear RUN bit before status stage of
+		 * deconfig request sent, but this seems to be causing problems.
+		 * Clear RUN once all endpoints are disabled instead.
+		 */
+		fallthrough;
+	default:
+		ret = tegra_xudc_ep0_delegate_req(xudc, ctrl);
+		break;
+	}
+
+	return ret;
+}
+
+static void tegra_xudc_handle_ep0_setup_packet(struct tegra_xudc *xudc,
+					       struct usb_ctrlrequest *ctrl,
+					       u16 seq_num)
+{
+	int ret;
+
+	xudc->setup_seq_num = seq_num;
+
+	/* Ensure EP0 is unhalted. */
+	ep_unhalt(xudc, 0);
+
+	/*
+	 * On Tegra210, setup packets with sequence numbers 0xfffe or 0xffff
+	 * are invalid.  Halt EP0 until we get a valid packet.
+	 */
+	if (xudc->soc->invalid_seq_num &&
+	    (seq_num == 0xfffe || seq_num == 0xffff)) {
+		dev_warn(xudc->dev, "invalid sequence number detected\n");
+		ep_halt(xudc, 0);
+		return;
+	}
+
+	if (ctrl->wLength)
+		xudc->setup_state = (ctrl->bRequestType & USB_DIR_IN) ?
+			DATA_STAGE_XFER :  DATA_STAGE_RECV;
+	else
+		xudc->setup_state = STATUS_STAGE_XFER;
+
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+		ret = tegra_xudc_ep0_standard_req(xudc, ctrl);
+	else
+		ret = tegra_xudc_ep0_delegate_req(xudc, ctrl);
+
+	if (ret < 0) {
+		dev_warn(xudc->dev, "setup request failed: %d\n", ret);
+		xudc->setup_state = WAIT_FOR_SETUP;
+		ep_halt(xudc, 0);
+	}
+}
+
+static void tegra_xudc_handle_ep0_event(struct tegra_xudc *xudc,
+					struct tegra_xudc_trb *event)
+{
+	struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)event;
+	u16 seq_num = trb_read_seq_num(event);
+
+	if (xudc->setup_state != WAIT_FOR_SETUP) {
+		/*
+		 * The controller is in the process of handling another
+		 * setup request.  Queue subsequent requests and handle
+		 * the last one once the controller reports a sequence
+		 * number error.
+		 */
+		memcpy(&xudc->setup_packet.ctrl_req, ctrl, sizeof(*ctrl));
+		xudc->setup_packet.seq_num = seq_num;
+		xudc->queued_setup_packet = true;
+	} else {
+		tegra_xudc_handle_ep0_setup_packet(xudc, ctrl, seq_num);
+	}
+}
+
+static struct tegra_xudc_request *
+trb_to_request(struct tegra_xudc_ep *ep, struct tegra_xudc_trb *trb)
+{
+	struct tegra_xudc_request *req;
+
+	list_for_each_entry(req, &ep->queue, list) {
+		if (!req->trbs_queued)
+			break;
+
+		if (trb_in_request(ep, req, trb))
+			return req;
+	}
+
+	return NULL;
+}
+
+static void tegra_xudc_handle_transfer_completion(struct tegra_xudc *xudc,
+						  struct tegra_xudc_ep *ep,
+						  struct tegra_xudc_trb *event)
+{
+	struct tegra_xudc_request *req;
+	struct tegra_xudc_trb *trb;
+	bool short_packet;
+
+	short_packet = (trb_read_cmpl_code(event) ==
+			TRB_CMPL_CODE_SHORT_PACKET);
+
+	trb = trb_phys_to_virt(ep, trb_read_data_ptr(event));
+	req = trb_to_request(ep, trb);
+
+	/*
+	 * TDs are complete on short packet or when the completed TRB is the
+	 * last TRB in the TD (the CHAIN bit is unset).
+	 */
+	if (req && (short_packet || (!trb_read_chain(trb) &&
+		(req->trbs_needed == req->trbs_queued)))) {
+		struct tegra_xudc_trb *last = req->last_trb;
+		unsigned int residual;
+
+		residual = trb_read_transfer_len(event);
+		req->usb_req.actual = req->usb_req.length - residual;
+
+		dev_dbg(xudc->dev, "bytes transferred %u / %u\n",
+			req->usb_req.actual, req->usb_req.length);
+
+		tegra_xudc_req_done(ep, req, 0);
+
+		if (ep->desc && usb_endpoint_xfer_control(ep->desc))
+			tegra_xudc_ep0_req_done(xudc);
+
+		/*
+		 * Advance the dequeue pointer past the end of the current TD
+		 * on short packet completion.
+		 */
+		if (short_packet) {
+			ep->deq_ptr = (last - ep->transfer_ring) + 1;
+			if (ep->deq_ptr == XUDC_TRANSFER_RING_SIZE - 1)
+				ep->deq_ptr = 0;
+		}
+	} else if (!req) {
+		dev_warn(xudc->dev, "transfer event on dequeued request\n");
+	}
+
+	if (ep->desc)
+		tegra_xudc_ep_kick_queue(ep);
+}
+
+static void tegra_xudc_handle_transfer_event(struct tegra_xudc *xudc,
+					     struct tegra_xudc_trb *event)
+{
+	unsigned int ep_index = trb_read_endpoint_id(event);
+	struct tegra_xudc_ep *ep = &xudc->ep[ep_index];
+	struct tegra_xudc_trb *trb;
+	u16 comp_code;
+
+	if (ep_ctx_read_state(ep->context) == EP_STATE_DISABLED) {
+		dev_warn(xudc->dev, "transfer event on disabled EP %u\n",
+			 ep_index);
+		return;
+	}
+
+	/* Update transfer ring dequeue pointer. */
+	trb = trb_phys_to_virt(ep, trb_read_data_ptr(event));
+	comp_code = trb_read_cmpl_code(event);
+	if (comp_code != TRB_CMPL_CODE_BABBLE_DETECTED_ERR) {
+		ep->deq_ptr = (trb - ep->transfer_ring) + 1;
+
+		if (ep->deq_ptr == XUDC_TRANSFER_RING_SIZE - 1)
+			ep->deq_ptr = 0;
+		ep->ring_full = false;
+	}
+
+	switch (comp_code) {
+	case TRB_CMPL_CODE_SUCCESS:
+	case TRB_CMPL_CODE_SHORT_PACKET:
+		tegra_xudc_handle_transfer_completion(xudc, ep, event);
+		break;
+	case TRB_CMPL_CODE_HOST_REJECTED:
+		dev_info(xudc->dev, "stream rejected on EP %u\n", ep_index);
+
+		ep->stream_rejected = true;
+		break;
+	case TRB_CMPL_CODE_PRIME_PIPE_RECEIVED:
+		dev_info(xudc->dev, "prime pipe received on EP %u\n", ep_index);
+
+		if (ep->stream_rejected) {
+			ep->stream_rejected = false;
+			/*
+			 * An EP is stopped when a stream is rejected.  Wait
+			 * for the EP to report that it is stopped and then
+			 * un-stop it.
+			 */
+			ep_wait_for_stopped(xudc, ep_index);
+		}
+		tegra_xudc_ep_ring_doorbell(ep);
+		break;
+	case TRB_CMPL_CODE_BABBLE_DETECTED_ERR:
+		/*
+		 * Wait for the EP to be stopped so the controller stops
+		 * processing doorbells.
+		 */
+		ep_wait_for_stopped(xudc, ep_index);
+		ep->enq_ptr = ep->deq_ptr;
+		tegra_xudc_ep_nuke(ep, -EIO);
+		fallthrough;
+	case TRB_CMPL_CODE_STREAM_NUMP_ERROR:
+	case TRB_CMPL_CODE_CTRL_DIR_ERR:
+	case TRB_CMPL_CODE_INVALID_STREAM_TYPE_ERR:
+	case TRB_CMPL_CODE_RING_UNDERRUN:
+	case TRB_CMPL_CODE_RING_OVERRUN:
+	case TRB_CMPL_CODE_ISOCH_BUFFER_OVERRUN:
+	case TRB_CMPL_CODE_USB_TRANS_ERR:
+	case TRB_CMPL_CODE_TRB_ERR:
+		dev_err(xudc->dev, "completion error %#x on EP %u\n",
+			comp_code, ep_index);
+
+		ep_halt(xudc, ep_index);
+		break;
+	case TRB_CMPL_CODE_CTRL_SEQNUM_ERR:
+		dev_info(xudc->dev, "sequence number error\n");
+
+		/*
+		 * Kill any queued control request and skip to the last
+		 * setup packet we received.
+		 */
+		tegra_xudc_ep_nuke(ep, -EINVAL);
+		xudc->setup_state = WAIT_FOR_SETUP;
+		if (!xudc->queued_setup_packet)
+			break;
+
+		tegra_xudc_handle_ep0_setup_packet(xudc,
+						   &xudc->setup_packet.ctrl_req,
+						   xudc->setup_packet.seq_num);
+		xudc->queued_setup_packet = false;
+		break;
+	case TRB_CMPL_CODE_STOPPED:
+		dev_dbg(xudc->dev, "stop completion code on EP %u\n",
+			ep_index);
+
+		/* Disconnected. */
+		tegra_xudc_ep_nuke(ep, -ECONNREFUSED);
+		break;
+	default:
+		dev_dbg(xudc->dev, "completion event %#x on EP %u\n",
+			comp_code, ep_index);
+		break;
+	}
+}
+
+static void tegra_xudc_reset(struct tegra_xudc *xudc)
+{
+	struct tegra_xudc_ep *ep0 = &xudc->ep[0];
+	dma_addr_t deq_ptr;
+	unsigned int i;
+
+	xudc->setup_state = WAIT_FOR_SETUP;
+	xudc->device_state = USB_STATE_DEFAULT;
+	usb_gadget_set_state(&xudc->gadget, xudc->device_state);
+
+	ep_unpause_all(xudc);
+
+	for (i = 0; i < ARRAY_SIZE(xudc->ep); i++)
+		tegra_xudc_ep_nuke(&xudc->ep[i], -ESHUTDOWN);
+
+	/*
+	 * Reset sequence number and dequeue pointer to flush the transfer
+	 * ring.
+	 */
+	ep0->deq_ptr = ep0->enq_ptr;
+	ep0->ring_full = false;
+
+	xudc->setup_seq_num = 0;
+	xudc->queued_setup_packet = false;
+
+	ep_ctx_write_rsvd(ep0->context, 0);
+	ep_ctx_write_partial_td(ep0->context, 0);
+	ep_ctx_write_splitxstate(ep0->context, 0);
+	ep_ctx_write_seq_num(ep0->context, 0);
+
+	deq_ptr = trb_virt_to_phys(ep0, &ep0->transfer_ring[ep0->deq_ptr]);
+
+	if (!dma_mapping_error(xudc->dev, deq_ptr)) {
+		ep_ctx_write_deq_ptr(ep0->context, deq_ptr);
+		ep_ctx_write_dcs(ep0->context, ep0->pcs);
+	}
+
+	ep_unhalt_all(xudc);
+	ep_reload(xudc, 0);
+	ep_unpause(xudc, 0);
+}
+
+static void tegra_xudc_port_connect(struct tegra_xudc *xudc)
+{
+	struct tegra_xudc_ep *ep0 = &xudc->ep[0];
+	u16 maxpacket;
+	u32 val;
+
+	val = (xudc_readl(xudc, PORTSC) & PORTSC_PS_MASK) >> PORTSC_PS_SHIFT;
+	switch (val) {
+	case PORTSC_PS_LS:
+		xudc->gadget.speed = USB_SPEED_LOW;
+		break;
+	case PORTSC_PS_FS:
+		xudc->gadget.speed = USB_SPEED_FULL;
+		break;
+	case PORTSC_PS_HS:
+		xudc->gadget.speed = USB_SPEED_HIGH;
+		break;
+	case PORTSC_PS_SS:
+		xudc->gadget.speed = USB_SPEED_SUPER;
+		break;
+	default:
+		xudc->gadget.speed = USB_SPEED_UNKNOWN;
+		break;
+	}
+
+	xudc->device_state = USB_STATE_DEFAULT;
+	usb_gadget_set_state(&xudc->gadget, xudc->device_state);
+
+	xudc->setup_state = WAIT_FOR_SETUP;
+
+	if (xudc->gadget.speed == USB_SPEED_SUPER)
+		maxpacket = 512;
+	else
+		maxpacket = 64;
+
+	ep_ctx_write_max_packet_size(ep0->context, maxpacket);
+	tegra_xudc_ep0_desc.wMaxPacketSize = cpu_to_le16(maxpacket);
+	usb_ep_set_maxpacket_limit(&ep0->usb_ep, maxpacket);
+
+	if (!xudc->soc->u1_enable) {
+		val = xudc_readl(xudc, PORTPM);
+		val &= ~(PORTPM_U1TIMEOUT_MASK);
+		xudc_writel(xudc, val, PORTPM);
+	}
+
+	if (!xudc->soc->u2_enable) {
+		val = xudc_readl(xudc, PORTPM);
+		val &= ~(PORTPM_U2TIMEOUT_MASK);
+		xudc_writel(xudc, val, PORTPM);
+	}
+
+	if (xudc->gadget.speed <= USB_SPEED_HIGH) {
+		val = xudc_readl(xudc, PORTPM);
+		val &= ~(PORTPM_L1S_MASK);
+		if (xudc->soc->lpm_enable)
+			val |= PORTPM_L1S(PORTPM_L1S_ACCEPT);
+		else
+			val |= PORTPM_L1S(PORTPM_L1S_NYET);
+		xudc_writel(xudc, val, PORTPM);
+	}
+
+	val = xudc_readl(xudc, ST);
+	if (val & ST_RC)
+		xudc_writel(xudc, ST_RC, ST);
+}
+
+static void tegra_xudc_port_disconnect(struct tegra_xudc *xudc)
+{
+	tegra_xudc_reset(xudc);
+
+	if (xudc->driver && xudc->driver->disconnect) {
+		spin_unlock(&xudc->lock);
+		xudc->driver->disconnect(&xudc->gadget);
+		spin_lock(&xudc->lock);
+	}
+
+	xudc->device_state = USB_STATE_NOTATTACHED;
+	usb_gadget_set_state(&xudc->gadget, xudc->device_state);
+
+	complete(&xudc->disconnect_complete);
+}
+
+static void tegra_xudc_port_reset(struct tegra_xudc *xudc)
+{
+	tegra_xudc_reset(xudc);
+
+	if (xudc->driver) {
+		spin_unlock(&xudc->lock);
+		usb_gadget_udc_reset(&xudc->gadget, xudc->driver);
+		spin_lock(&xudc->lock);
+	}
+
+	tegra_xudc_port_connect(xudc);
+}
+
+static void tegra_xudc_port_suspend(struct tegra_xudc *xudc)
+{
+	dev_dbg(xudc->dev, "port suspend\n");
+
+	xudc->resume_state = xudc->device_state;
+	xudc->device_state = USB_STATE_SUSPENDED;
+	usb_gadget_set_state(&xudc->gadget, xudc->device_state);
+
+	if (xudc->driver->suspend) {
+		spin_unlock(&xudc->lock);
+		xudc->driver->suspend(&xudc->gadget);
+		spin_lock(&xudc->lock);
+	}
+}
+
+static void tegra_xudc_port_resume(struct tegra_xudc *xudc)
+{
+	dev_dbg(xudc->dev, "port resume\n");
+
+	tegra_xudc_resume_device_state(xudc);
+
+	if (xudc->driver->resume) {
+		spin_unlock(&xudc->lock);
+		xudc->driver->resume(&xudc->gadget);
+		spin_lock(&xudc->lock);
+	}
+}
+
+static inline void clear_port_change(struct tegra_xudc *xudc, u32 flag)
+{
+	u32 val;
+
+	val = xudc_readl(xudc, PORTSC);
+	val &= ~PORTSC_CHANGE_MASK;
+	val |= flag;
+	xudc_writel(xudc, val, PORTSC);
+}
+
+static void __tegra_xudc_handle_port_status(struct tegra_xudc *xudc)
+{
+	u32 portsc, porthalt;
+
+	porthalt = xudc_readl(xudc, PORTHALT);
+	if ((porthalt & PORTHALT_STCHG_REQ) &&
+	    (porthalt & PORTHALT_HALT_LTSSM)) {
+		dev_dbg(xudc->dev, "STCHG_REQ, PORTHALT = %#x\n", porthalt);
+		porthalt &= ~PORTHALT_HALT_LTSSM;
+		xudc_writel(xudc, porthalt, PORTHALT);
+	}
+
+	portsc = xudc_readl(xudc, PORTSC);
+	if ((portsc & PORTSC_PRC) && (portsc & PORTSC_PR)) {
+		dev_dbg(xudc->dev, "PRC, PR, PORTSC = %#x\n", portsc);
+		clear_port_change(xudc, PORTSC_PRC | PORTSC_PED);
+#define TOGGLE_VBUS_WAIT_MS 100
+		if (xudc->soc->port_reset_quirk) {
+			schedule_delayed_work(&xudc->port_reset_war_work,
+				msecs_to_jiffies(TOGGLE_VBUS_WAIT_MS));
+			xudc->wait_for_sec_prc = 1;
+		}
+	}
+
+	if ((portsc & PORTSC_PRC) && !(portsc & PORTSC_PR)) {
+		dev_dbg(xudc->dev, "PRC, Not PR, PORTSC = %#x\n", portsc);
+		clear_port_change(xudc, PORTSC_PRC | PORTSC_PED);
+		tegra_xudc_port_reset(xudc);
+		cancel_delayed_work(&xudc->port_reset_war_work);
+		xudc->wait_for_sec_prc = 0;
+	}
+
+	portsc = xudc_readl(xudc, PORTSC);
+	if (portsc & PORTSC_WRC) {
+		dev_dbg(xudc->dev, "WRC, PORTSC = %#x\n", portsc);
+		clear_port_change(xudc, PORTSC_WRC | PORTSC_PED);
+		if (!(xudc_readl(xudc, PORTSC) & PORTSC_WPR))
+			tegra_xudc_port_reset(xudc);
+	}
+
+	portsc = xudc_readl(xudc, PORTSC);
+	if (portsc & PORTSC_CSC) {
+		dev_dbg(xudc->dev, "CSC, PORTSC = %#x\n", portsc);
+		clear_port_change(xudc, PORTSC_CSC);
+
+		if (portsc & PORTSC_CCS)
+			tegra_xudc_port_connect(xudc);
+		else
+			tegra_xudc_port_disconnect(xudc);
+
+		if (xudc->wait_csc) {
+			cancel_delayed_work(&xudc->plc_reset_work);
+			xudc->wait_csc = false;
+		}
+	}
+
+	portsc = xudc_readl(xudc, PORTSC);
+	if (portsc & PORTSC_PLC) {
+		u32 pls = (portsc & PORTSC_PLS_MASK) >> PORTSC_PLS_SHIFT;
+
+		dev_dbg(xudc->dev, "PLC, PORTSC = %#x\n", portsc);
+		clear_port_change(xudc, PORTSC_PLC);
+		switch (pls) {
+		case PORTSC_PLS_U3:
+			tegra_xudc_port_suspend(xudc);
+			break;
+		case PORTSC_PLS_U0:
+			if (xudc->gadget.speed < USB_SPEED_SUPER)
+				tegra_xudc_port_resume(xudc);
+			break;
+		case PORTSC_PLS_RESUME:
+			if (xudc->gadget.speed == USB_SPEED_SUPER)
+				tegra_xudc_port_resume(xudc);
+			break;
+		case PORTSC_PLS_INACTIVE:
+			schedule_delayed_work(&xudc->plc_reset_work,
+					msecs_to_jiffies(TOGGLE_VBUS_WAIT_MS));
+			xudc->wait_csc = true;
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (portsc & PORTSC_CEC) {
+		dev_warn(xudc->dev, "CEC, PORTSC = %#x\n", portsc);
+		clear_port_change(xudc, PORTSC_CEC);
+	}
+
+	dev_dbg(xudc->dev, "PORTSC = %#x\n", xudc_readl(xudc, PORTSC));
+}
+
+static void tegra_xudc_handle_port_status(struct tegra_xudc *xudc)
+{
+	while ((xudc_readl(xudc, PORTSC) & PORTSC_CHANGE_MASK) ||
+	       (xudc_readl(xudc, PORTHALT) & PORTHALT_STCHG_REQ))
+		__tegra_xudc_handle_port_status(xudc);
+}
+
+static void tegra_xudc_handle_event(struct tegra_xudc *xudc,
+				    struct tegra_xudc_trb *event)
+{
+	u32 type = trb_read_type(event);
+
+	dump_trb(xudc, "EVENT", event);
+
+	switch (type) {
+	case TRB_TYPE_PORT_STATUS_CHANGE_EVENT:
+		tegra_xudc_handle_port_status(xudc);
+		break;
+	case TRB_TYPE_TRANSFER_EVENT:
+		tegra_xudc_handle_transfer_event(xudc, event);
+		break;
+	case TRB_TYPE_SETUP_PACKET_EVENT:
+		tegra_xudc_handle_ep0_event(xudc, event);
+		break;
+	default:
+		dev_info(xudc->dev, "Unrecognized TRB type = %#x\n", type);
+		break;
+	}
+}
+
+static void tegra_xudc_process_event_ring(struct tegra_xudc *xudc)
+{
+	struct tegra_xudc_trb *event;
+	dma_addr_t erdp;
+
+	while (true) {
+		event = xudc->event_ring[xudc->event_ring_index] +
+			xudc->event_ring_deq_ptr;
+
+		if (trb_read_cycle(event) != xudc->ccs)
+			break;
+
+		tegra_xudc_handle_event(xudc, event);
+
+		xudc->event_ring_deq_ptr++;
+		if (xudc->event_ring_deq_ptr == XUDC_EVENT_RING_SIZE) {
+			xudc->event_ring_deq_ptr = 0;
+			xudc->event_ring_index++;
+		}
+
+		if (xudc->event_ring_index == XUDC_NR_EVENT_RINGS) {
+			xudc->event_ring_index = 0;
+			xudc->ccs = !xudc->ccs;
+		}
+	}
+
+	erdp = xudc->event_ring_phys[xudc->event_ring_index] +
+		xudc->event_ring_deq_ptr * sizeof(*event);
+
+	xudc_writel(xudc, upper_32_bits(erdp), ERDPHI);
+	xudc_writel(xudc, lower_32_bits(erdp) | ERDPLO_EHB, ERDPLO);
+}
+
+static irqreturn_t tegra_xudc_irq(int irq, void *data)
+{
+	struct tegra_xudc *xudc = data;
+	unsigned long flags;
+	u32 val;
+
+	val = xudc_readl(xudc, ST);
+	if (!(val & ST_IP))
+		return IRQ_NONE;
+	xudc_writel(xudc, ST_IP, ST);
+
+	spin_lock_irqsave(&xudc->lock, flags);
+	tegra_xudc_process_event_ring(xudc);
+	spin_unlock_irqrestore(&xudc->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static int tegra_xudc_alloc_ep(struct tegra_xudc *xudc, unsigned int index)
+{
+	struct tegra_xudc_ep *ep = &xudc->ep[index];
+
+	ep->xudc = xudc;
+	ep->index = index;
+	ep->context = &xudc->ep_context[index];
+	INIT_LIST_HEAD(&ep->queue);
+
+	/*
+	 * EP1 would be the input endpoint corresponding to EP0, but since
+	 * EP0 is bi-directional, EP1 is unused.
+	 */
+	if (index == 1)
+		return 0;
+
+	ep->transfer_ring = dma_pool_alloc(xudc->transfer_ring_pool,
+					   GFP_KERNEL,
+					   &ep->transfer_ring_phys);
+	if (!ep->transfer_ring)
+		return -ENOMEM;
+
+	if (index) {
+		snprintf(ep->name, sizeof(ep->name), "ep%u%s", index / 2,
+			 (index % 2 == 0) ? "out" : "in");
+		ep->usb_ep.name = ep->name;
+		usb_ep_set_maxpacket_limit(&ep->usb_ep, 1024);
+		ep->usb_ep.max_streams = 16;
+		ep->usb_ep.ops = &tegra_xudc_ep_ops;
+		ep->usb_ep.caps.type_bulk = true;
+		ep->usb_ep.caps.type_int = true;
+		if (index & 1)
+			ep->usb_ep.caps.dir_in = true;
+		else
+			ep->usb_ep.caps.dir_out = true;
+		list_add_tail(&ep->usb_ep.ep_list, &xudc->gadget.ep_list);
+	} else {
+		strscpy(ep->name, "ep0", 3);
+		ep->usb_ep.name = ep->name;
+		usb_ep_set_maxpacket_limit(&ep->usb_ep, 512);
+		ep->usb_ep.ops = &tegra_xudc_ep0_ops;
+		ep->usb_ep.caps.type_control = true;
+		ep->usb_ep.caps.dir_in = true;
+		ep->usb_ep.caps.dir_out = true;
+	}
+
+	return 0;
+}
+
+static void tegra_xudc_free_ep(struct tegra_xudc *xudc, unsigned int index)
+{
+	struct tegra_xudc_ep *ep = &xudc->ep[index];
+
+	/*
+	 * EP1 would be the input endpoint corresponding to EP0, but since
+	 * EP0 is bi-directional, EP1 is unused.
+	 */
+	if (index == 1)
+		return;
+
+	dma_pool_free(xudc->transfer_ring_pool, ep->transfer_ring,
+		      ep->transfer_ring_phys);
+}
+
+static int tegra_xudc_alloc_eps(struct tegra_xudc *xudc)
+{
+	struct usb_request *req;
+	unsigned int i;
+	int err;
+
+	xudc->ep_context =
+		dma_alloc_coherent(xudc->dev, XUDC_NR_EPS *
+				    sizeof(*xudc->ep_context),
+				    &xudc->ep_context_phys, GFP_KERNEL);
+	if (!xudc->ep_context)
+		return -ENOMEM;
+
+	xudc->transfer_ring_pool =
+		dmam_pool_create(dev_name(xudc->dev), xudc->dev,
+				 XUDC_TRANSFER_RING_SIZE *
+				 sizeof(struct tegra_xudc_trb),
+				 sizeof(struct tegra_xudc_trb), 0);
+	if (!xudc->transfer_ring_pool) {
+		err = -ENOMEM;
+		goto free_ep_context;
+	}
+
+	INIT_LIST_HEAD(&xudc->gadget.ep_list);
+	for (i = 0; i < ARRAY_SIZE(xudc->ep); i++) {
+		err = tegra_xudc_alloc_ep(xudc, i);
+		if (err < 0)
+			goto free_eps;
+	}
+
+	req = tegra_xudc_ep_alloc_request(&xudc->ep[0].usb_ep, GFP_KERNEL);
+	if (!req) {
+		err = -ENOMEM;
+		goto free_eps;
+	}
+	xudc->ep0_req = to_xudc_req(req);
+
+	return 0;
+
+free_eps:
+	for (; i > 0; i--)
+		tegra_xudc_free_ep(xudc, i - 1);
+free_ep_context:
+	dma_free_coherent(xudc->dev, XUDC_NR_EPS * sizeof(*xudc->ep_context),
+			  xudc->ep_context, xudc->ep_context_phys);
+	return err;
+}
+
+static void tegra_xudc_init_eps(struct tegra_xudc *xudc)
+{
+	xudc_writel(xudc, lower_32_bits(xudc->ep_context_phys), ECPLO);
+	xudc_writel(xudc, upper_32_bits(xudc->ep_context_phys), ECPHI);
+}
+
+static void tegra_xudc_free_eps(struct tegra_xudc *xudc)
+{
+	unsigned int i;
+
+	tegra_xudc_ep_free_request(&xudc->ep[0].usb_ep,
+				   &xudc->ep0_req->usb_req);
+
+	for (i = 0; i < ARRAY_SIZE(xudc->ep); i++)
+		tegra_xudc_free_ep(xudc, i);
+
+	dma_free_coherent(xudc->dev, XUDC_NR_EPS * sizeof(*xudc->ep_context),
+			  xudc->ep_context, xudc->ep_context_phys);
+}
+
+static int tegra_xudc_alloc_event_ring(struct tegra_xudc *xudc)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(xudc->event_ring); i++) {
+		xudc->event_ring[i] =
+			dma_alloc_coherent(xudc->dev, XUDC_EVENT_RING_SIZE *
+					   sizeof(*xudc->event_ring[i]),
+					   &xudc->event_ring_phys[i],
+					   GFP_KERNEL);
+		if (!xudc->event_ring[i])
+			goto free_dma;
+	}
+
+	return 0;
+
+free_dma:
+	for (; i > 0; i--) {
+		dma_free_coherent(xudc->dev, XUDC_EVENT_RING_SIZE *
+				  sizeof(*xudc->event_ring[i - 1]),
+				  xudc->event_ring[i - 1],
+				  xudc->event_ring_phys[i - 1]);
+	}
+	return -ENOMEM;
+}
+
+static void tegra_xudc_init_event_ring(struct tegra_xudc *xudc)
+{
+	unsigned int i;
+	u32 val;
+
+	for (i = 0; i < ARRAY_SIZE(xudc->event_ring); i++) {
+		memset(xudc->event_ring[i], 0, XUDC_EVENT_RING_SIZE *
+		       sizeof(*xudc->event_ring[i]));
+
+		val = xudc_readl(xudc, ERSTSZ);
+		val &= ~(ERSTSZ_ERSTXSZ_MASK << ERSTSZ_ERSTXSZ_SHIFT(i));
+		val |= XUDC_EVENT_RING_SIZE << ERSTSZ_ERSTXSZ_SHIFT(i);
+		xudc_writel(xudc, val, ERSTSZ);
+
+		xudc_writel(xudc, lower_32_bits(xudc->event_ring_phys[i]),
+			    ERSTXBALO(i));
+		xudc_writel(xudc, upper_32_bits(xudc->event_ring_phys[i]),
+			    ERSTXBAHI(i));
+	}
+
+	val = lower_32_bits(xudc->event_ring_phys[0]);
+	xudc_writel(xudc, val, ERDPLO);
+	val |= EREPLO_ECS;
+	xudc_writel(xudc, val, EREPLO);
+
+	val = upper_32_bits(xudc->event_ring_phys[0]);
+	xudc_writel(xudc, val, ERDPHI);
+	xudc_writel(xudc, val, EREPHI);
+
+	xudc->ccs = true;
+	xudc->event_ring_index = 0;
+	xudc->event_ring_deq_ptr = 0;
+}
+
+static void tegra_xudc_free_event_ring(struct tegra_xudc *xudc)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(xudc->event_ring); i++) {
+		dma_free_coherent(xudc->dev, XUDC_EVENT_RING_SIZE *
+				  sizeof(*xudc->event_ring[i]),
+				  xudc->event_ring[i],
+				  xudc->event_ring_phys[i]);
+	}
+}
+
+static void tegra_xudc_fpci_ipfs_init(struct tegra_xudc *xudc)
+{
+	u32 val;
+
+	if (xudc->soc->has_ipfs) {
+		val = ipfs_readl(xudc, XUSB_DEV_CONFIGURATION_0);
+		val |= XUSB_DEV_CONFIGURATION_0_EN_FPCI;
+		ipfs_writel(xudc, val, XUSB_DEV_CONFIGURATION_0);
+		usleep_range(10, 15);
+	}
+
+	/* Enable bus master */
+	val = XUSB_DEV_CFG_1_IO_SPACE_EN | XUSB_DEV_CFG_1_MEMORY_SPACE_EN |
+		XUSB_DEV_CFG_1_BUS_MASTER_EN;
+	fpci_writel(xudc, val, XUSB_DEV_CFG_1);
+
+	/* Program BAR0 space */
+	val = fpci_readl(xudc, XUSB_DEV_CFG_4);
+	val &= ~(XUSB_DEV_CFG_4_BASE_ADDR_MASK);
+	val |= xudc->phys_base & (XUSB_DEV_CFG_4_BASE_ADDR_MASK);
+
+	fpci_writel(xudc, val, XUSB_DEV_CFG_4);
+	fpci_writel(xudc, upper_32_bits(xudc->phys_base), XUSB_DEV_CFG_5);
+
+	usleep_range(100, 200);
+
+	if (xudc->soc->has_ipfs) {
+		/* Enable interrupt assertion */
+		val = ipfs_readl(xudc, XUSB_DEV_INTR_MASK_0);
+		val |= XUSB_DEV_INTR_MASK_0_IP_INT_MASK;
+		ipfs_writel(xudc, val, XUSB_DEV_INTR_MASK_0);
+	}
+}
+
+static void tegra_xudc_device_params_init(struct tegra_xudc *xudc)
+{
+	u32 val, imod;
+
+	if (xudc->soc->has_ipfs) {
+		val = xudc_readl(xudc, BLCG);
+		val |= BLCG_ALL;
+		val &= ~(BLCG_DFPCI | BLCG_UFPCI | BLCG_FE |
+				BLCG_COREPLL_PWRDN);
+		val |= BLCG_IOPLL_0_PWRDN;
+		val |= BLCG_IOPLL_1_PWRDN;
+		val |= BLCG_IOPLL_2_PWRDN;
+
+		xudc_writel(xudc, val, BLCG);
+	}
+
+	if (xudc->soc->port_speed_quirk)
+		tegra_xudc_limit_port_speed(xudc);
+
+	/* Set a reasonable U3 exit timer value. */
+	val = xudc_readl(xudc, SSPX_CORE_PADCTL4);
+	val &= ~(SSPX_CORE_PADCTL4_RXDAT_VLD_TIMEOUT_U3_MASK);
+	val |= SSPX_CORE_PADCTL4_RXDAT_VLD_TIMEOUT_U3(0x5dc0);
+	xudc_writel(xudc, val, SSPX_CORE_PADCTL4);
+
+	/* Default ping LFPS tBurst is too large. */
+	val = xudc_readl(xudc, SSPX_CORE_CNT0);
+	val &= ~(SSPX_CORE_CNT0_PING_TBURST_MASK);
+	val |= SSPX_CORE_CNT0_PING_TBURST(0xa);
+	xudc_writel(xudc, val, SSPX_CORE_CNT0);
+
+	/* Default tPortConfiguration timeout is too small. */
+	val = xudc_readl(xudc, SSPX_CORE_CNT30);
+	val &= ~(SSPX_CORE_CNT30_LMPITP_TIMER_MASK);
+	val |= SSPX_CORE_CNT30_LMPITP_TIMER(0x978);
+	xudc_writel(xudc, val, SSPX_CORE_CNT30);
+
+	if (xudc->soc->lpm_enable) {
+		/* Set L1 resume duration to 95 us. */
+		val = xudc_readl(xudc, HSFSPI_COUNT13);
+		val &= ~(HSFSPI_COUNT13_U2_RESUME_K_DURATION_MASK);
+		val |= HSFSPI_COUNT13_U2_RESUME_K_DURATION(0x2c88);
+		xudc_writel(xudc, val, HSFSPI_COUNT13);
+	}
+
+	/*
+	 * Compliance suite appears to be violating polling LFPS tBurst max
+	 * of 1.4us.  Send 1.45us instead.
+	 */
+	val = xudc_readl(xudc, SSPX_CORE_CNT32);
+	val &= ~(SSPX_CORE_CNT32_POLL_TBURST_MAX_MASK);
+	val |= SSPX_CORE_CNT32_POLL_TBURST_MAX(0xb0);
+	xudc_writel(xudc, val, SSPX_CORE_CNT32);
+
+	/* Direct HS/FS port instance to RxDetect. */
+	val = xudc_readl(xudc, CFG_DEV_FE);
+	val &= ~(CFG_DEV_FE_PORTREGSEL_MASK);
+	val |= CFG_DEV_FE_PORTREGSEL(CFG_DEV_FE_PORTREGSEL_HSFS_PI);
+	xudc_writel(xudc, val, CFG_DEV_FE);
+
+	val = xudc_readl(xudc, PORTSC);
+	val &= ~(PORTSC_CHANGE_MASK | PORTSC_PLS_MASK);
+	val |= PORTSC_LWS | PORTSC_PLS(PORTSC_PLS_RXDETECT);
+	xudc_writel(xudc, val, PORTSC);
+
+	/* Direct SS port instance to RxDetect. */
+	val = xudc_readl(xudc, CFG_DEV_FE);
+	val &= ~(CFG_DEV_FE_PORTREGSEL_MASK);
+	val |= CFG_DEV_FE_PORTREGSEL_SS_PI & CFG_DEV_FE_PORTREGSEL_MASK;
+	xudc_writel(xudc, val, CFG_DEV_FE);
+
+	val = xudc_readl(xudc, PORTSC);
+	val &= ~(PORTSC_CHANGE_MASK | PORTSC_PLS_MASK);
+	val |= PORTSC_LWS | PORTSC_PLS(PORTSC_PLS_RXDETECT);
+	xudc_writel(xudc, val, PORTSC);
+
+	/* Restore port instance. */
+	val = xudc_readl(xudc, CFG_DEV_FE);
+	val &= ~(CFG_DEV_FE_PORTREGSEL_MASK);
+	xudc_writel(xudc, val, CFG_DEV_FE);
+
+	/*
+	 * Enable INFINITE_SS_RETRY to prevent device from entering
+	 * Disabled.Error when attached to buggy SuperSpeed hubs.
+	 */
+	val = xudc_readl(xudc, CFG_DEV_FE);
+	val |= CFG_DEV_FE_INFINITE_SS_RETRY;
+	xudc_writel(xudc, val, CFG_DEV_FE);
+
+	/* Set interrupt moderation. */
+	imod = XUDC_INTERRUPT_MODERATION_US * 4;
+	val = xudc_readl(xudc, RT_IMOD);
+	val &= ~((RT_IMOD_IMODI_MASK) | (RT_IMOD_IMODC_MASK));
+	val |= (RT_IMOD_IMODI(imod) | RT_IMOD_IMODC(imod));
+	xudc_writel(xudc, val, RT_IMOD);
+
+	/* increase SSPI transaction timeout from 32us to 512us */
+	val = xudc_readl(xudc, CFG_DEV_SSPI_XFER);
+	val &= ~(CFG_DEV_SSPI_XFER_ACKTIMEOUT_MASK);
+	val |= CFG_DEV_SSPI_XFER_ACKTIMEOUT(0xf000);
+	xudc_writel(xudc, val, CFG_DEV_SSPI_XFER);
+}
+
+static int tegra_xudc_phy_get(struct tegra_xudc *xudc)
+{
+	int err = 0, usb3;
+	unsigned int i;
+
+	xudc->utmi_phy = devm_kcalloc(xudc->dev, xudc->soc->num_phys,
+					   sizeof(*xudc->utmi_phy), GFP_KERNEL);
+	if (!xudc->utmi_phy)
+		return -ENOMEM;
+
+	xudc->usb3_phy = devm_kcalloc(xudc->dev, xudc->soc->num_phys,
+					   sizeof(*xudc->usb3_phy), GFP_KERNEL);
+	if (!xudc->usb3_phy)
+		return -ENOMEM;
+
+	xudc->usbphy = devm_kcalloc(xudc->dev, xudc->soc->num_phys,
+					   sizeof(*xudc->usbphy), GFP_KERNEL);
+	if (!xudc->usbphy)
+		return -ENOMEM;
+
+	xudc->vbus_nb.notifier_call = tegra_xudc_vbus_notify;
+
+	for (i = 0; i < xudc->soc->num_phys; i++) {
+		char phy_name[] = "usb.-.";
+
+		/* Get USB2 phy */
+		snprintf(phy_name, sizeof(phy_name), "usb2-%d", i);
+		xudc->utmi_phy[i] = devm_phy_optional_get(xudc->dev, phy_name);
+		if (IS_ERR(xudc->utmi_phy[i])) {
+			err = PTR_ERR(xudc->utmi_phy[i]);
+			dev_err_probe(xudc->dev, err,
+				      "failed to get usb2-%d PHY\n", i);
+			goto clean_up;
+		} else if (xudc->utmi_phy[i]) {
+			/* Get usb-phy, if utmi phy is available */
+			xudc->usbphy[i] = devm_usb_get_phy_by_node(xudc->dev,
+						xudc->utmi_phy[i]->dev.of_node,
+						&xudc->vbus_nb);
+			if (IS_ERR(xudc->usbphy[i])) {
+				err = PTR_ERR(xudc->usbphy[i]);
+				dev_err_probe(xudc->dev, err,
+					      "failed to get usbphy-%d\n", i);
+				goto clean_up;
+			}
+		} else if (!xudc->utmi_phy[i]) {
+			/* if utmi phy is not available, ignore USB3 phy get */
+			continue;
+		}
+
+		/* Get USB3 phy */
+		usb3 = tegra_xusb_padctl_get_usb3_companion(xudc->padctl, i);
+		if (usb3 < 0)
+			continue;
+
+		snprintf(phy_name, sizeof(phy_name), "usb3-%d", usb3);
+		xudc->usb3_phy[i] = devm_phy_optional_get(xudc->dev, phy_name);
+		if (IS_ERR(xudc->usb3_phy[i])) {
+			err = PTR_ERR(xudc->usb3_phy[i]);
+			dev_err_probe(xudc->dev, err,
+				      "failed to get usb3-%d PHY\n", usb3);
+			goto clean_up;
+		} else if (xudc->usb3_phy[i])
+			dev_dbg(xudc->dev, "usb3-%d PHY registered", usb3);
+	}
+
+	return err;
+
+clean_up:
+	for (i = 0; i < xudc->soc->num_phys; i++) {
+		xudc->usb3_phy[i] = NULL;
+		xudc->utmi_phy[i] = NULL;
+		xudc->usbphy[i] = NULL;
+	}
+
+	return err;
+}
+
+static void tegra_xudc_phy_exit(struct tegra_xudc *xudc)
+{
+	unsigned int i;
+
+	for (i = 0; i < xudc->soc->num_phys; i++) {
+		phy_exit(xudc->usb3_phy[i]);
+		phy_exit(xudc->utmi_phy[i]);
+	}
+}
+
+static int tegra_xudc_phy_init(struct tegra_xudc *xudc)
+{
+	int err;
+	unsigned int i;
+
+	for (i = 0; i < xudc->soc->num_phys; i++) {
+		err = phy_init(xudc->utmi_phy[i]);
+		if (err < 0) {
+			dev_err(xudc->dev, "UTMI PHY #%u initialization failed: %d\n", i, err);
+			goto exit_phy;
+		}
+
+		err = phy_init(xudc->usb3_phy[i]);
+		if (err < 0) {
+			dev_err(xudc->dev, "USB3 PHY #%u initialization failed: %d\n", i, err);
+			goto exit_phy;
+		}
+	}
+	return 0;
+
+exit_phy:
+	tegra_xudc_phy_exit(xudc);
+	return err;
+}
+
+static const char * const tegra210_xudc_supply_names[] = {
+	"hvdd-usb",
+	"avddio-usb",
+};
+
+static const char * const tegra210_xudc_clock_names[] = {
+	"dev",
+	"ss",
+	"ss_src",
+	"hs_src",
+	"fs_src",
+};
+
+static const char * const tegra186_xudc_clock_names[] = {
+	"dev",
+	"ss",
+	"ss_src",
+	"fs_src",
+};
+
+static struct tegra_xudc_soc tegra210_xudc_soc_data = {
+	.supply_names = tegra210_xudc_supply_names,
+	.num_supplies = ARRAY_SIZE(tegra210_xudc_supply_names),
+	.clock_names = tegra210_xudc_clock_names,
+	.num_clks = ARRAY_SIZE(tegra210_xudc_clock_names),
+	.num_phys = 4,
+	.u1_enable = false,
+	.u2_enable = true,
+	.lpm_enable = false,
+	.invalid_seq_num = true,
+	.pls_quirk = true,
+	.port_reset_quirk = true,
+	.port_speed_quirk = false,
+	.has_ipfs = true,
+};
+
+static struct tegra_xudc_soc tegra186_xudc_soc_data = {
+	.clock_names = tegra186_xudc_clock_names,
+	.num_clks = ARRAY_SIZE(tegra186_xudc_clock_names),
+	.num_phys = 4,
+	.u1_enable = true,
+	.u2_enable = true,
+	.lpm_enable = false,
+	.invalid_seq_num = false,
+	.pls_quirk = false,
+	.port_reset_quirk = false,
+	.port_speed_quirk = false,
+	.has_ipfs = false,
+};
+
+static struct tegra_xudc_soc tegra194_xudc_soc_data = {
+	.clock_names = tegra186_xudc_clock_names,
+	.num_clks = ARRAY_SIZE(tegra186_xudc_clock_names),
+	.num_phys = 4,
+	.u1_enable = true,
+	.u2_enable = true,
+	.lpm_enable = true,
+	.invalid_seq_num = false,
+	.pls_quirk = false,
+	.port_reset_quirk = false,
+	.port_speed_quirk = true,
+	.has_ipfs = false,
+};
+
+static const struct of_device_id tegra_xudc_of_match[] = {
+	{
+		.compatible = "nvidia,tegra210-xudc",
+		.data = &tegra210_xudc_soc_data
+	},
+	{
+		.compatible = "nvidia,tegra186-xudc",
+		.data = &tegra186_xudc_soc_data
+	},
+	{
+		.compatible = "nvidia,tegra194-xudc",
+		.data = &tegra194_xudc_soc_data
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tegra_xudc_of_match);
+
+static void tegra_xudc_powerdomain_remove(struct tegra_xudc *xudc)
+{
+	if (xudc->genpd_dl_ss)
+		device_link_del(xudc->genpd_dl_ss);
+	if (xudc->genpd_dl_device)
+		device_link_del(xudc->genpd_dl_device);
+	if (xudc->genpd_dev_ss)
+		dev_pm_domain_detach(xudc->genpd_dev_ss, true);
+	if (xudc->genpd_dev_device)
+		dev_pm_domain_detach(xudc->genpd_dev_device, true);
+}
+
+static int tegra_xudc_powerdomain_init(struct tegra_xudc *xudc)
+{
+	struct device *dev = xudc->dev;
+	int err;
+
+	xudc->genpd_dev_device = dev_pm_domain_attach_by_name(dev, "dev");
+	if (IS_ERR(xudc->genpd_dev_device)) {
+		err = PTR_ERR(xudc->genpd_dev_device);
+		dev_err(dev, "failed to get device power domain: %d\n", err);
+		return err;
+	}
+
+	xudc->genpd_dev_ss = dev_pm_domain_attach_by_name(dev, "ss");
+	if (IS_ERR(xudc->genpd_dev_ss)) {
+		err = PTR_ERR(xudc->genpd_dev_ss);
+		dev_err(dev, "failed to get SuperSpeed power domain: %d\n", err);
+		return err;
+	}
+
+	xudc->genpd_dl_device = device_link_add(dev, xudc->genpd_dev_device,
+						DL_FLAG_PM_RUNTIME |
+						DL_FLAG_STATELESS);
+	if (!xudc->genpd_dl_device) {
+		dev_err(dev, "failed to add USB device link\n");
+		return -ENODEV;
+	}
+
+	xudc->genpd_dl_ss = device_link_add(dev, xudc->genpd_dev_ss,
+					    DL_FLAG_PM_RUNTIME |
+					    DL_FLAG_STATELESS);
+	if (!xudc->genpd_dl_ss) {
+		dev_err(dev, "failed to add SuperSpeed device link\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int tegra_xudc_probe(struct platform_device *pdev)
+{
+	struct tegra_xudc *xudc;
+	struct resource *res;
+	unsigned int i;
+	int err;
+
+	xudc = devm_kzalloc(&pdev->dev, sizeof(*xudc), GFP_KERNEL);
+	if (!xudc)
+		return -ENOMEM;
+
+	xudc->dev = &pdev->dev;
+	platform_set_drvdata(pdev, xudc);
+
+	xudc->soc = of_device_get_match_data(&pdev->dev);
+	if (!xudc->soc)
+		return -ENODEV;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "base");
+	xudc->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(xudc->base))
+		return PTR_ERR(xudc->base);
+	xudc->phys_base = res->start;
+
+	xudc->fpci = devm_platform_ioremap_resource_byname(pdev, "fpci");
+	if (IS_ERR(xudc->fpci))
+		return PTR_ERR(xudc->fpci);
+
+	if (xudc->soc->has_ipfs) {
+		xudc->ipfs = devm_platform_ioremap_resource_byname(pdev, "ipfs");
+		if (IS_ERR(xudc->ipfs))
+			return PTR_ERR(xudc->ipfs);
+	}
+
+	xudc->irq = platform_get_irq(pdev, 0);
+	if (xudc->irq < 0)
+		return xudc->irq;
+
+	err = devm_request_irq(&pdev->dev, xudc->irq, tegra_xudc_irq, 0,
+			       dev_name(&pdev->dev), xudc);
+	if (err < 0) {
+		dev_err(xudc->dev, "failed to claim IRQ#%u: %d\n", xudc->irq,
+			err);
+		return err;
+	}
+
+	xudc->clks = devm_kcalloc(&pdev->dev, xudc->soc->num_clks, sizeof(*xudc->clks),
+				  GFP_KERNEL);
+	if (!xudc->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < xudc->soc->num_clks; i++)
+		xudc->clks[i].id = xudc->soc->clock_names[i];
+
+	err = devm_clk_bulk_get(&pdev->dev, xudc->soc->num_clks, xudc->clks);
+	if (err) {
+		dev_err_probe(xudc->dev, err, "failed to request clocks\n");
+		return err;
+	}
+
+	xudc->supplies = devm_kcalloc(&pdev->dev, xudc->soc->num_supplies,
+				      sizeof(*xudc->supplies), GFP_KERNEL);
+	if (!xudc->supplies)
+		return -ENOMEM;
+
+	for (i = 0; i < xudc->soc->num_supplies; i++)
+		xudc->supplies[i].supply = xudc->soc->supply_names[i];
+
+	err = devm_regulator_bulk_get(&pdev->dev, xudc->soc->num_supplies,
+				      xudc->supplies);
+	if (err) {
+		dev_err_probe(xudc->dev, err, "failed to request regulators\n");
+		return err;
+	}
+
+	xudc->padctl = tegra_xusb_padctl_get(&pdev->dev);
+	if (IS_ERR(xudc->padctl))
+		return PTR_ERR(xudc->padctl);
+
+	err = regulator_bulk_enable(xudc->soc->num_supplies, xudc->supplies);
+	if (err) {
+		dev_err(xudc->dev, "failed to enable regulators: %d\n", err);
+		goto put_padctl;
+	}
+
+	err = tegra_xudc_phy_get(xudc);
+	if (err)
+		goto disable_regulator;
+
+	err = tegra_xudc_powerdomain_init(xudc);
+	if (err)
+		goto put_powerdomains;
+
+	err = tegra_xudc_phy_init(xudc);
+	if (err)
+		goto put_powerdomains;
+
+	err = tegra_xudc_alloc_event_ring(xudc);
+	if (err)
+		goto disable_phy;
+
+	err = tegra_xudc_alloc_eps(xudc);
+	if (err)
+		goto free_event_ring;
+
+	spin_lock_init(&xudc->lock);
+
+	init_completion(&xudc->disconnect_complete);
+
+	INIT_WORK(&xudc->usb_role_sw_work, tegra_xudc_usb_role_sw_work);
+
+	INIT_DELAYED_WORK(&xudc->plc_reset_work, tegra_xudc_plc_reset_work);
+
+	INIT_DELAYED_WORK(&xudc->port_reset_war_work,
+				tegra_xudc_port_reset_war_work);
+
+	pm_runtime_enable(&pdev->dev);
+
+	xudc->gadget.ops = &tegra_xudc_gadget_ops;
+	xudc->gadget.ep0 = &xudc->ep[0].usb_ep;
+	xudc->gadget.name = "tegra-xudc";
+	xudc->gadget.max_speed = USB_SPEED_SUPER;
+
+	err = usb_add_gadget_udc(&pdev->dev, &xudc->gadget);
+	if (err) {
+		dev_err(&pdev->dev, "failed to add USB gadget: %d\n", err);
+		goto free_eps;
+	}
+
+	return 0;
+
+free_eps:
+	pm_runtime_disable(&pdev->dev);
+	tegra_xudc_free_eps(xudc);
+free_event_ring:
+	tegra_xudc_free_event_ring(xudc);
+disable_phy:
+	tegra_xudc_phy_exit(xudc);
+put_powerdomains:
+	tegra_xudc_powerdomain_remove(xudc);
+disable_regulator:
+	regulator_bulk_disable(xudc->soc->num_supplies, xudc->supplies);
+put_padctl:
+	tegra_xusb_padctl_put(xudc->padctl);
+
+	return err;
+}
+
+static int tegra_xudc_remove(struct platform_device *pdev)
+{
+	struct tegra_xudc *xudc = platform_get_drvdata(pdev);
+	unsigned int i;
+
+	pm_runtime_get_sync(xudc->dev);
+
+	cancel_delayed_work_sync(&xudc->plc_reset_work);
+	cancel_work_sync(&xudc->usb_role_sw_work);
+
+	usb_del_gadget_udc(&xudc->gadget);
+
+	tegra_xudc_free_eps(xudc);
+	tegra_xudc_free_event_ring(xudc);
+
+	tegra_xudc_powerdomain_remove(xudc);
+
+	regulator_bulk_disable(xudc->soc->num_supplies, xudc->supplies);
+
+	for (i = 0; i < xudc->soc->num_phys; i++) {
+		phy_power_off(xudc->utmi_phy[i]);
+		phy_power_off(xudc->usb3_phy[i]);
+	}
+
+	tegra_xudc_phy_exit(xudc);
+
+	pm_runtime_disable(xudc->dev);
+	pm_runtime_put(xudc->dev);
+
+	tegra_xusb_padctl_put(xudc->padctl);
+
+	return 0;
+}
+
+static int __maybe_unused tegra_xudc_powergate(struct tegra_xudc *xudc)
+{
+	unsigned long flags;
+
+	dev_dbg(xudc->dev, "entering ELPG\n");
+
+	spin_lock_irqsave(&xudc->lock, flags);
+
+	xudc->powergated = true;
+	xudc->saved_regs.ctrl = xudc_readl(xudc, CTRL);
+	xudc->saved_regs.portpm = xudc_readl(xudc, PORTPM);
+	xudc_writel(xudc, 0, CTRL);
+
+	spin_unlock_irqrestore(&xudc->lock, flags);
+
+	clk_bulk_disable_unprepare(xudc->soc->num_clks, xudc->clks);
+
+	regulator_bulk_disable(xudc->soc->num_supplies, xudc->supplies);
+
+	dev_dbg(xudc->dev, "entering ELPG done\n");
+	return 0;
+}
+
+static int __maybe_unused tegra_xudc_unpowergate(struct tegra_xudc *xudc)
+{
+	unsigned long flags;
+	int err;
+
+	dev_dbg(xudc->dev, "exiting ELPG\n");
+
+	err = regulator_bulk_enable(xudc->soc->num_supplies,
+			xudc->supplies);
+	if (err < 0)
+		return err;
+
+	err = clk_bulk_prepare_enable(xudc->soc->num_clks, xudc->clks);
+	if (err < 0)
+		return err;
+
+	tegra_xudc_fpci_ipfs_init(xudc);
+
+	tegra_xudc_device_params_init(xudc);
+
+	tegra_xudc_init_event_ring(xudc);
+
+	tegra_xudc_init_eps(xudc);
+
+	xudc_writel(xudc, xudc->saved_regs.portpm, PORTPM);
+	xudc_writel(xudc, xudc->saved_regs.ctrl, CTRL);
+
+	spin_lock_irqsave(&xudc->lock, flags);
+	xudc->powergated = false;
+	spin_unlock_irqrestore(&xudc->lock, flags);
+
+	dev_dbg(xudc->dev, "exiting ELPG done\n");
+	return 0;
+}
+
+static int __maybe_unused tegra_xudc_suspend(struct device *dev)
+{
+	struct tegra_xudc *xudc = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&xudc->lock, flags);
+	xudc->suspended = true;
+	spin_unlock_irqrestore(&xudc->lock, flags);
+
+	flush_work(&xudc->usb_role_sw_work);
+
+	if (!pm_runtime_status_suspended(dev)) {
+		/* Forcibly disconnect before powergating. */
+		tegra_xudc_device_mode_off(xudc);
+		tegra_xudc_powergate(xudc);
+	}
+
+	pm_runtime_disable(dev);
+
+	return 0;
+}
+
+static int __maybe_unused tegra_xudc_resume(struct device *dev)
+{
+	struct tegra_xudc *xudc = dev_get_drvdata(dev);
+	unsigned long flags;
+	int err;
+
+	err = tegra_xudc_unpowergate(xudc);
+	if (err < 0)
+		return err;
+
+	spin_lock_irqsave(&xudc->lock, flags);
+	xudc->suspended = false;
+	spin_unlock_irqrestore(&xudc->lock, flags);
+
+	schedule_work(&xudc->usb_role_sw_work);
+
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static int __maybe_unused tegra_xudc_runtime_suspend(struct device *dev)
+{
+	struct tegra_xudc *xudc = dev_get_drvdata(dev);
+
+	return tegra_xudc_powergate(xudc);
+}
+
+static int __maybe_unused tegra_xudc_runtime_resume(struct device *dev)
+{
+	struct tegra_xudc *xudc = dev_get_drvdata(dev);
+
+	return tegra_xudc_unpowergate(xudc);
+}
+
+static const struct dev_pm_ops tegra_xudc_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(tegra_xudc_suspend, tegra_xudc_resume)
+	SET_RUNTIME_PM_OPS(tegra_xudc_runtime_suspend,
+			   tegra_xudc_runtime_resume, NULL)
+};
+
+static struct platform_driver tegra_xudc_driver = {
+	.probe = tegra_xudc_probe,
+	.remove = tegra_xudc_remove,
+	.driver = {
+		.name = "tegra-xudc",
+		.pm = &tegra_xudc_pm_ops,
+		.of_match_table = tegra_xudc_of_match,
+	},
+};
+module_platform_driver(tegra_xudc_driver);
+
+MODULE_DESCRIPTION("NVIDIA Tegra XUSB Device Controller");
+MODULE_AUTHOR("Andrew Bresticker <abrestic@chromium.org>");
+MODULE_AUTHOR("Hui Fu <hfu@nvidia.com>");
+MODULE_AUTHOR("Nagarjuna Kristam <nkristam@nvidia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/gadget/udc/trace.c b/drivers/usb/gadget/udc/trace.c
new file mode 100644
index 000000000..19e837de2
--- /dev/null
+++ b/drivers/usb/gadget/udc/trace.c
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * trace.c - USB Gadget Framework Trace Support
+ *
+ * Copyright (C) 2016 Intel Corporation
+ * Author: Felipe Balbi <felipe.balbi@linux.intel.com>
+ */
+
+#define CREATE_TRACE_POINTS
+#include "trace.h"
diff --git a/drivers/usb/gadget/udc/trace.h b/drivers/usb/gadget/udc/trace.h
new file mode 100644
index 000000000..abdbcb1ba
--- /dev/null
+++ b/drivers/usb/gadget/udc/trace.h
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * udc.c - Core UDC Framework
+ *
+ * Copyright (C) 2016 Intel Corporation
+ * Author: Felipe Balbi <felipe.balbi@linux.intel.com>
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM gadget
+
+#if !defined(__UDC_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define __UDC_TRACE_H
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+#include <asm/byteorder.h>
+#include <linux/usb/gadget.h>
+
+DECLARE_EVENT_CLASS(udc_log_gadget,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret),
+	TP_STRUCT__entry(
+		__field(enum usb_device_speed, speed)
+		__field(enum usb_device_speed, max_speed)
+		__field(enum usb_device_state, state)
+		__field(unsigned, mA)
+		__field(unsigned, sg_supported)
+		__field(unsigned, is_otg)
+		__field(unsigned, is_a_peripheral)
+		__field(unsigned, b_hnp_enable)
+		__field(unsigned, a_hnp_support)
+		__field(unsigned, hnp_polling_support)
+		__field(unsigned, host_request_flag)
+		__field(unsigned, quirk_ep_out_aligned_size)
+		__field(unsigned, quirk_altset_not_supp)
+		__field(unsigned, quirk_stall_not_supp)
+		__field(unsigned, quirk_zlp_not_supp)
+		__field(unsigned, is_selfpowered)
+		__field(unsigned, deactivated)
+		__field(unsigned, connected)
+		__field(int, ret)
+	),
+	TP_fast_assign(
+		__entry->speed = g->speed;
+		__entry->max_speed = g->max_speed;
+		__entry->state = g->state;
+		__entry->mA = g->mA;
+		__entry->sg_supported = g->sg_supported;
+		__entry->is_otg = g->is_otg;
+		__entry->is_a_peripheral = g->is_a_peripheral;
+		__entry->b_hnp_enable = g->b_hnp_enable;
+		__entry->a_hnp_support = g->a_hnp_support;
+		__entry->hnp_polling_support = g->hnp_polling_support;
+		__entry->host_request_flag = g->host_request_flag;
+		__entry->quirk_ep_out_aligned_size = g->quirk_ep_out_aligned_size;
+		__entry->quirk_altset_not_supp = g->quirk_altset_not_supp;
+		__entry->quirk_stall_not_supp = g->quirk_stall_not_supp;
+		__entry->quirk_zlp_not_supp = g->quirk_zlp_not_supp;
+		__entry->is_selfpowered = g->is_selfpowered;
+		__entry->deactivated = g->deactivated;
+		__entry->connected = g->connected;
+		__entry->ret = ret;
+	),
+	TP_printk("speed %d/%d state %d %dmA [%s%s%s%s%s%s%s%s%s%s%s%s%s%s] --> %d",
+		__entry->speed, __entry->max_speed, __entry->state, __entry->mA,
+		__entry->sg_supported ? "sg:" : "",
+		__entry->is_otg ? "OTG:" : "",
+		__entry->is_a_peripheral ? "a_peripheral:" : "",
+		__entry->b_hnp_enable ? "b_hnp:" : "",
+		__entry->a_hnp_support ? "a_hnp:" : "",
+		__entry->hnp_polling_support ? "hnp_poll:" : "",
+		__entry->host_request_flag ? "hostreq:" : "",
+		__entry->quirk_ep_out_aligned_size ? "out_aligned:" : "",
+		__entry->quirk_altset_not_supp ? "no_altset:" : "",
+		__entry->quirk_stall_not_supp ? "no_stall:" : "",
+		__entry->quirk_zlp_not_supp ? "no_zlp" : "",
+		__entry->is_selfpowered ? "self-powered:" : "bus-powered:",
+		__entry->deactivated ? "deactivated:" : "activated:",
+		__entry->connected ? "connected" : "disconnected",
+		__entry->ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_frame_number,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_wakeup,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_set_selfpowered,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_clear_selfpowered,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_vbus_connect,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_vbus_draw,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_vbus_disconnect,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_connect,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_disconnect,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_deactivate,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_activate,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DECLARE_EVENT_CLASS(udc_log_ep,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret),
+	TP_STRUCT__entry(
+		__string(name, ep->name)
+		__field(unsigned, maxpacket)
+		__field(unsigned, maxpacket_limit)
+		__field(unsigned, max_streams)
+		__field(unsigned, mult)
+		__field(unsigned, maxburst)
+		__field(u8, address)
+		__field(bool, claimed)
+		__field(bool, enabled)
+		__field(int, ret)
+	),
+	TP_fast_assign(
+		__assign_str(name, ep->name);
+		__entry->maxpacket = ep->maxpacket;
+		__entry->maxpacket_limit = ep->maxpacket_limit;
+		__entry->max_streams = ep->max_streams;
+		__entry->mult = ep->mult;
+		__entry->maxburst = ep->maxburst;
+		__entry->address = ep->address,
+		__entry->claimed = ep->claimed;
+		__entry->enabled = ep->enabled;
+		__entry->ret = ret;
+	),
+	TP_printk("%s: mps %d/%d streams %d mult %d burst %d addr %02x %s%s --> %d",
+		__get_str(name), __entry->maxpacket, __entry->maxpacket_limit,
+		__entry->max_streams, __entry->mult, __entry->maxburst,
+		__entry->address, __entry->claimed ? "claimed:" : "released:",
+		__entry->enabled ? "enabled" : "disabled", ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_set_maxpacket_limit,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_enable,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_disable,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_set_halt,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_clear_halt,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_set_wedge,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_fifo_status,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_fifo_flush,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DECLARE_EVENT_CLASS(udc_log_req,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret),
+	TP_STRUCT__entry(
+		__string(name, ep->name)
+		__field(unsigned, length)
+		__field(unsigned, actual)
+		__field(unsigned, num_sgs)
+		__field(unsigned, num_mapped_sgs)
+		__field(unsigned, stream_id)
+		__field(unsigned, no_interrupt)
+		__field(unsigned, zero)
+		__field(unsigned, short_not_ok)
+		__field(int, status)
+		__field(int, ret)
+		__field(struct usb_request *, req)
+	),
+	TP_fast_assign(
+		__assign_str(name, ep->name);
+		__entry->length = req->length;
+		__entry->actual = req->actual;
+		__entry->num_sgs = req->num_sgs;
+		__entry->num_mapped_sgs = req->num_mapped_sgs;
+		__entry->stream_id = req->stream_id;
+		__entry->no_interrupt = req->no_interrupt;
+		__entry->zero = req->zero;
+		__entry->short_not_ok = req->short_not_ok;
+		__entry->status = req->status;
+		__entry->ret = ret;
+		__entry->req = req;
+	),
+	TP_printk("%s: req %p length %d/%d sgs %d/%d stream %d %s%s%s status %d --> %d",
+		__get_str(name),__entry->req,  __entry->actual, __entry->length,
+		__entry->num_mapped_sgs, __entry->num_sgs, __entry->stream_id,
+		__entry->zero ? "Z" : "z",
+		__entry->short_not_ok ? "S" : "s",
+		__entry->no_interrupt ? "i" : "I",
+		__entry->status, __entry->ret
+	)
+);
+
+DEFINE_EVENT(udc_log_req, usb_ep_alloc_request,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret)
+);
+
+DEFINE_EVENT(udc_log_req, usb_ep_free_request,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret)
+);
+
+DEFINE_EVENT(udc_log_req, usb_ep_queue,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret)
+);
+
+DEFINE_EVENT(udc_log_req, usb_ep_dequeue,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret)
+);
+
+DEFINE_EVENT(udc_log_req, usb_gadget_giveback_request,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret)
+);
+
+#endif /* __UDC_TRACE_H */
+
+/* this part has to be here */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c
new file mode 100644
index 000000000..4c7a4f770
--- /dev/null
+++ b/drivers/usb/gadget/udc/udc-xilinx.c
@@ -0,0 +1,2271 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx USB peripheral controller driver
+ *
+ * Copyright (C) 2004 by Thomas Rathbone
+ * Copyright (C) 2005 by HP Labs
+ * Copyright (C) 2005 by David Brownell
+ * Copyright (C) 2010 - 2014 Xilinx, Inc.
+ *
+ * Some parts of this driver code is based on the driver for at91-series
+ * USB peripheral controller (at91_udc.c).
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/prefetch.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* Register offsets for the USB device.*/
+#define XUSB_EP0_CONFIG_OFFSET		0x0000  /* EP0 Config Reg Offset */
+#define XUSB_SETUP_PKT_ADDR_OFFSET	0x0080  /* Setup Packet Address */
+#define XUSB_ADDRESS_OFFSET		0x0100  /* Address Register */
+#define XUSB_CONTROL_OFFSET		0x0104  /* Control Register */
+#define XUSB_STATUS_OFFSET		0x0108  /* Status Register */
+#define XUSB_FRAMENUM_OFFSET		0x010C	/* Frame Number Register */
+#define XUSB_IER_OFFSET			0x0110	/* Interrupt Enable Register */
+#define XUSB_BUFFREADY_OFFSET		0x0114	/* Buffer Ready Register */
+#define XUSB_TESTMODE_OFFSET		0x0118	/* Test Mode Register */
+#define XUSB_DMA_RESET_OFFSET		0x0200  /* DMA Soft Reset Register */
+#define XUSB_DMA_CONTROL_OFFSET		0x0204	/* DMA Control Register */
+#define XUSB_DMA_DSAR_ADDR_OFFSET	0x0208	/* DMA source Address Reg */
+#define XUSB_DMA_DDAR_ADDR_OFFSET	0x020C	/* DMA destination Addr Reg */
+#define XUSB_DMA_LENGTH_OFFSET		0x0210	/* DMA Length Register */
+#define XUSB_DMA_STATUS_OFFSET		0x0214	/* DMA Status Register */
+
+/* Endpoint Configuration Space offsets */
+#define XUSB_EP_CFGSTATUS_OFFSET	0x00	/* Endpoint Config Status  */
+#define XUSB_EP_BUF0COUNT_OFFSET	0x08	/* Buffer 0 Count */
+#define XUSB_EP_BUF1COUNT_OFFSET	0x0C	/* Buffer 1 Count */
+
+#define XUSB_CONTROL_USB_READY_MASK	0x80000000 /* USB ready Mask */
+#define XUSB_CONTROL_USB_RMTWAKE_MASK	0x40000000 /* Remote wake up mask */
+
+/* Interrupt register related masks.*/
+#define XUSB_STATUS_GLOBAL_INTR_MASK	0x80000000 /* Global Intr Enable */
+#define XUSB_STATUS_DMADONE_MASK	0x04000000 /* DMA done Mask */
+#define XUSB_STATUS_DMAERR_MASK		0x02000000 /* DMA Error Mask */
+#define XUSB_STATUS_DMABUSY_MASK	0x80000000 /* DMA Error Mask */
+#define XUSB_STATUS_RESUME_MASK		0x01000000 /* USB Resume Mask */
+#define XUSB_STATUS_RESET_MASK		0x00800000 /* USB Reset Mask */
+#define XUSB_STATUS_SUSPEND_MASK	0x00400000 /* USB Suspend Mask */
+#define XUSB_STATUS_DISCONNECT_MASK	0x00200000 /* USB Disconnect Mask */
+#define XUSB_STATUS_FIFO_BUFF_RDY_MASK	0x00100000 /* FIFO Buff Ready Mask */
+#define XUSB_STATUS_FIFO_BUFF_FREE_MASK	0x00080000 /* FIFO Buff Free Mask */
+#define XUSB_STATUS_SETUP_PACKET_MASK	0x00040000 /* Setup packet received */
+#define XUSB_STATUS_EP1_BUFF2_COMP_MASK	0x00000200 /* EP 1 Buff 2 Processed */
+#define XUSB_STATUS_EP1_BUFF1_COMP_MASK	0x00000002 /* EP 1 Buff 1 Processed */
+#define XUSB_STATUS_EP0_BUFF2_COMP_MASK	0x00000100 /* EP 0 Buff 2 Processed */
+#define XUSB_STATUS_EP0_BUFF1_COMP_MASK	0x00000001 /* EP 0 Buff 1 Processed */
+#define XUSB_STATUS_HIGH_SPEED_MASK	0x00010000 /* USB Speed Mask */
+/* Suspend,Reset,Suspend and Disconnect Mask */
+#define XUSB_STATUS_INTR_EVENT_MASK	0x01E00000
+/* Buffers  completion Mask */
+#define XUSB_STATUS_INTR_BUFF_COMP_ALL_MASK	0x0000FEFF
+/* Mask for buffer 0 and buffer 1 completion for all Endpoints */
+#define XUSB_STATUS_INTR_BUFF_COMP_SHIFT_MASK	0x00000101
+#define XUSB_STATUS_EP_BUFF2_SHIFT	8	   /* EP buffer offset */
+
+/* Endpoint Configuration Status Register */
+#define XUSB_EP_CFG_VALID_MASK		0x80000000 /* Endpoint Valid bit */
+#define XUSB_EP_CFG_STALL_MASK		0x40000000 /* Endpoint Stall bit */
+#define XUSB_EP_CFG_DATA_TOGGLE_MASK	0x08000000 /* Endpoint Data toggle */
+
+/* USB device specific global configuration constants.*/
+#define XUSB_MAX_ENDPOINTS		8	/* Maximum End Points */
+#define XUSB_EP_NUMBER_ZERO		0	/* End point Zero */
+/* DPRAM is the source address for DMA transfer */
+#define XUSB_DMA_READ_FROM_DPRAM	0x80000000
+#define XUSB_DMA_DMASR_BUSY		0x80000000 /* DMA busy */
+#define XUSB_DMA_DMASR_ERROR		0x40000000 /* DMA Error */
+/*
+ * When this bit is set, the DMA buffer ready bit is set by hardware upon
+ * DMA transfer completion.
+ */
+#define XUSB_DMA_BRR_CTRL		0x40000000 /* DMA bufready ctrl bit */
+/* Phase States */
+#define SETUP_PHASE			0x0000	/* Setup Phase */
+#define DATA_PHASE			0x0001  /* Data Phase */
+#define STATUS_PHASE			0x0002  /* Status Phase */
+
+#define EP0_MAX_PACKET		64 /* Endpoint 0 maximum packet length */
+#define STATUSBUFF_SIZE		2  /* Buffer size for GET_STATUS command */
+#define EPNAME_SIZE		4  /* Buffer size for endpoint name */
+
+/* container_of helper macros */
+#define to_udc(g)	 container_of((g), struct xusb_udc, gadget)
+#define to_xusb_ep(ep)	 container_of((ep), struct xusb_ep, ep_usb)
+#define to_xusb_req(req) container_of((req), struct xusb_req, usb_req)
+
+/**
+ * struct xusb_req - Xilinx USB device request structure
+ * @usb_req: Linux usb request structure
+ * @queue: usb device request queue
+ * @ep: pointer to xusb_endpoint structure
+ */
+struct xusb_req {
+	struct usb_request usb_req;
+	struct list_head queue;
+	struct xusb_ep *ep;
+};
+
+/**
+ * struct xusb_ep - USB end point structure.
+ * @ep_usb: usb endpoint instance
+ * @queue: endpoint message queue
+ * @udc: xilinx usb peripheral driver instance pointer
+ * @desc: pointer to the usb endpoint descriptor
+ * @rambase: the endpoint buffer address
+ * @offset: the endpoint register offset value
+ * @name: name of the endpoint
+ * @epnumber: endpoint number
+ * @maxpacket: maximum packet size the endpoint can store
+ * @buffer0count: the size of the packet recieved in the first buffer
+ * @buffer1count: the size of the packet received in the second buffer
+ * @curbufnum: current buffer of endpoint that will be processed next
+ * @buffer0ready: the busy state of first buffer
+ * @buffer1ready: the busy state of second buffer
+ * @is_in: endpoint direction (IN or OUT)
+ * @is_iso: endpoint type(isochronous or non isochronous)
+ */
+struct xusb_ep {
+	struct usb_ep ep_usb;
+	struct list_head queue;
+	struct xusb_udc *udc;
+	const struct usb_endpoint_descriptor *desc;
+	u32  rambase;
+	u32  offset;
+	char name[4];
+	u16  epnumber;
+	u16  maxpacket;
+	u16  buffer0count;
+	u16  buffer1count;
+	u8   curbufnum;
+	bool buffer0ready;
+	bool buffer1ready;
+	bool is_in;
+	bool is_iso;
+};
+
+/**
+ * struct xusb_udc -  USB peripheral driver structure
+ * @gadget: USB gadget driver instance
+ * @ep: an array of endpoint structures
+ * @driver: pointer to the usb gadget driver instance
+ * @setup: usb_ctrlrequest structure for control requests
+ * @req: pointer to dummy request for get status command
+ * @dev: pointer to device structure in gadget
+ * @usb_state: device in suspended state or not
+ * @remote_wkp: remote wakeup enabled by host
+ * @setupseqtx: tx status
+ * @setupseqrx: rx status
+ * @addr: the usb device base address
+ * @lock: instance of spinlock
+ * @dma_enabled: flag indicating whether the dma is included in the system
+ * @clk: pointer to struct clk
+ * @read_fn: function pointer to read device registers
+ * @write_fn: function pointer to write to device registers
+ */
+struct xusb_udc {
+	struct usb_gadget gadget;
+	struct xusb_ep ep[8];
+	struct usb_gadget_driver *driver;
+	struct usb_ctrlrequest setup;
+	struct xusb_req *req;
+	struct device *dev;
+	u32 usb_state;
+	u32 remote_wkp;
+	u32 setupseqtx;
+	u32 setupseqrx;
+	void __iomem *addr;
+	spinlock_t lock;
+	bool dma_enabled;
+	struct clk *clk;
+
+	unsigned int (*read_fn)(void __iomem *);
+	void (*write_fn)(void __iomem *, u32, u32);
+};
+
+/* Endpoint buffer start addresses in the core */
+static u32 rambase[8] = { 0x22, 0x1000, 0x1100, 0x1200, 0x1300, 0x1400, 0x1500,
+			  0x1600 };
+
+static const char driver_name[] = "xilinx-udc";
+static const char ep0name[] = "ep0";
+
+/* Control endpoint configuration.*/
+static const struct usb_endpoint_descriptor config_bulk_out_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_OUT,
+	.bmAttributes		= USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize		= cpu_to_le16(EP0_MAX_PACKET),
+};
+
+/**
+ * xudc_write32 - little endian write to device registers
+ * @addr: base addr of device registers
+ * @offset: register offset
+ * @val: data to be written
+ */
+static void xudc_write32(void __iomem *addr, u32 offset, u32 val)
+{
+	iowrite32(val, addr + offset);
+}
+
+/**
+ * xudc_read32 - little endian read from device registers
+ * @addr: addr of device register
+ * Return: value at addr
+ */
+static unsigned int xudc_read32(void __iomem *addr)
+{
+	return ioread32(addr);
+}
+
+/**
+ * xudc_write32_be - big endian write to device registers
+ * @addr: base addr of device registers
+ * @offset: register offset
+ * @val: data to be written
+ */
+static void xudc_write32_be(void __iomem *addr, u32 offset, u32 val)
+{
+	iowrite32be(val, addr + offset);
+}
+
+/**
+ * xudc_read32_be - big endian read from device registers
+ * @addr: addr of device register
+ * Return: value at addr
+ */
+static unsigned int xudc_read32_be(void __iomem *addr)
+{
+	return ioread32be(addr);
+}
+
+/**
+ * xudc_wrstatus - Sets up the usb device status stages.
+ * @udc: pointer to the usb device controller structure.
+ */
+static void xudc_wrstatus(struct xusb_udc *udc)
+{
+	struct xusb_ep *ep0 = &udc->ep[XUSB_EP_NUMBER_ZERO];
+	u32 epcfgreg;
+
+	epcfgreg = udc->read_fn(udc->addr + ep0->offset)|
+				XUSB_EP_CFG_DATA_TOGGLE_MASK;
+	udc->write_fn(udc->addr, ep0->offset, epcfgreg);
+	udc->write_fn(udc->addr, ep0->offset + XUSB_EP_BUF0COUNT_OFFSET, 0);
+	udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1);
+}
+
+/**
+ * xudc_epconfig - Configures the given endpoint.
+ * @ep: pointer to the usb device endpoint structure.
+ * @udc: pointer to the usb peripheral controller structure.
+ *
+ * This function configures a specific endpoint with the given configuration
+ * data.
+ */
+static void xudc_epconfig(struct xusb_ep *ep, struct xusb_udc *udc)
+{
+	u32 epcfgreg;
+
+	/*
+	 * Configure the end point direction, type, Max Packet Size and the
+	 * EP buffer location.
+	 */
+	epcfgreg = ((ep->is_in << 29) | (ep->is_iso << 28) |
+		   (ep->ep_usb.maxpacket << 15) | (ep->rambase));
+	udc->write_fn(udc->addr, ep->offset, epcfgreg);
+
+	/* Set the Buffer count and the Buffer ready bits.*/
+	udc->write_fn(udc->addr, ep->offset + XUSB_EP_BUF0COUNT_OFFSET,
+		      ep->buffer0count);
+	udc->write_fn(udc->addr, ep->offset + XUSB_EP_BUF1COUNT_OFFSET,
+		      ep->buffer1count);
+	if (ep->buffer0ready)
+		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET,
+			      1 << ep->epnumber);
+	if (ep->buffer1ready)
+		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET,
+			      1 << (ep->epnumber + XUSB_STATUS_EP_BUFF2_SHIFT));
+}
+
+/**
+ * xudc_start_dma - Starts DMA transfer.
+ * @ep: pointer to the usb device endpoint structure.
+ * @src: DMA source address.
+ * @dst: DMA destination address.
+ * @length: number of bytes to transfer.
+ *
+ * Return: 0 on success, error code on failure
+ *
+ * This function starts DMA transfer by writing to DMA source,
+ * destination and lenth registers.
+ */
+static int xudc_start_dma(struct xusb_ep *ep, dma_addr_t src,
+			  dma_addr_t dst, u32 length)
+{
+	struct xusb_udc *udc = ep->udc;
+	int rc = 0;
+	u32 timeout = 500;
+	u32 reg;
+
+	/*
+	 * Set the addresses in the DMA source and
+	 * destination registers and then set the length
+	 * into the DMA length register.
+	 */
+	udc->write_fn(udc->addr, XUSB_DMA_DSAR_ADDR_OFFSET, src);
+	udc->write_fn(udc->addr, XUSB_DMA_DDAR_ADDR_OFFSET, dst);
+	udc->write_fn(udc->addr, XUSB_DMA_LENGTH_OFFSET, length);
+
+	/*
+	 * Wait till DMA transaction is complete and
+	 * check whether the DMA transaction was
+	 * successful.
+	 */
+	do {
+		reg = udc->read_fn(udc->addr + XUSB_DMA_STATUS_OFFSET);
+		if (!(reg &  XUSB_DMA_DMASR_BUSY))
+			break;
+
+		/*
+		 * We can't sleep here, because it's also called from
+		 * interrupt context.
+		 */
+		timeout--;
+		if (!timeout) {
+			dev_err(udc->dev, "DMA timeout\n");
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+	} while (1);
+
+	if ((udc->read_fn(udc->addr + XUSB_DMA_STATUS_OFFSET) &
+			  XUSB_DMA_DMASR_ERROR) == XUSB_DMA_DMASR_ERROR){
+		dev_err(udc->dev, "DMA Error\n");
+		rc = -EINVAL;
+	}
+
+	return rc;
+}
+
+/**
+ * xudc_dma_send - Sends IN data using DMA.
+ * @ep: pointer to the usb device endpoint structure.
+ * @req: pointer to the usb request structure.
+ * @buffer: pointer to data to be sent.
+ * @length: number of bytes to send.
+ *
+ * Return: 0 on success, -EAGAIN if no buffer is free and error
+ *	   code on failure.
+ *
+ * This function sends data using DMA.
+ */
+static int xudc_dma_send(struct xusb_ep *ep, struct xusb_req *req,
+			 u8 *buffer, u32 length)
+{
+	u32 *eprambase;
+	dma_addr_t src;
+	dma_addr_t dst;
+	struct xusb_udc *udc = ep->udc;
+
+	src = req->usb_req.dma + req->usb_req.actual;
+	if (req->usb_req.length)
+		dma_sync_single_for_device(udc->dev, src,
+					   length, DMA_TO_DEVICE);
+	if (!ep->curbufnum && !ep->buffer0ready) {
+		/* Get the Buffer address and copy the transmit data.*/
+		eprambase = (u32 __force *)(udc->addr + ep->rambase);
+		dst = virt_to_phys(eprambase);
+		udc->write_fn(udc->addr, ep->offset +
+			      XUSB_EP_BUF0COUNT_OFFSET, length);
+		udc->write_fn(udc->addr, XUSB_DMA_CONTROL_OFFSET,
+			      XUSB_DMA_BRR_CTRL | (1 << ep->epnumber));
+		ep->buffer0ready = 1;
+		ep->curbufnum = 1;
+	} else if (ep->curbufnum && !ep->buffer1ready) {
+		/* Get the Buffer address and copy the transmit data.*/
+		eprambase = (u32 __force *)(udc->addr + ep->rambase +
+			     ep->ep_usb.maxpacket);
+		dst = virt_to_phys(eprambase);
+		udc->write_fn(udc->addr, ep->offset +
+			      XUSB_EP_BUF1COUNT_OFFSET, length);
+		udc->write_fn(udc->addr, XUSB_DMA_CONTROL_OFFSET,
+			      XUSB_DMA_BRR_CTRL | (1 << (ep->epnumber +
+			      XUSB_STATUS_EP_BUFF2_SHIFT)));
+		ep->buffer1ready = 1;
+		ep->curbufnum = 0;
+	} else {
+		/* None of ping pong buffers are ready currently .*/
+		return -EAGAIN;
+	}
+
+	return xudc_start_dma(ep, src, dst, length);
+}
+
+/**
+ * xudc_dma_receive - Receives OUT data using DMA.
+ * @ep: pointer to the usb device endpoint structure.
+ * @req: pointer to the usb request structure.
+ * @buffer: pointer to storage buffer of received data.
+ * @length: number of bytes to receive.
+ *
+ * Return: 0 on success, -EAGAIN if no buffer is free and error
+ *	   code on failure.
+ *
+ * This function receives data using DMA.
+ */
+static int xudc_dma_receive(struct xusb_ep *ep, struct xusb_req *req,
+			    u8 *buffer, u32 length)
+{
+	u32 *eprambase;
+	dma_addr_t src;
+	dma_addr_t dst;
+	struct xusb_udc *udc = ep->udc;
+
+	dst = req->usb_req.dma + req->usb_req.actual;
+	if (!ep->curbufnum && !ep->buffer0ready) {
+		/* Get the Buffer address and copy the transmit data */
+		eprambase = (u32 __force *)(udc->addr + ep->rambase);
+		src = virt_to_phys(eprambase);
+		udc->write_fn(udc->addr, XUSB_DMA_CONTROL_OFFSET,
+			      XUSB_DMA_BRR_CTRL | XUSB_DMA_READ_FROM_DPRAM |
+			      (1 << ep->epnumber));
+		ep->buffer0ready = 1;
+		ep->curbufnum = 1;
+	} else if (ep->curbufnum && !ep->buffer1ready) {
+		/* Get the Buffer address and copy the transmit data */
+		eprambase = (u32 __force *)(udc->addr +
+			     ep->rambase + ep->ep_usb.maxpacket);
+		src = virt_to_phys(eprambase);
+		udc->write_fn(udc->addr, XUSB_DMA_CONTROL_OFFSET,
+			      XUSB_DMA_BRR_CTRL | XUSB_DMA_READ_FROM_DPRAM |
+			      (1 << (ep->epnumber +
+			      XUSB_STATUS_EP_BUFF2_SHIFT)));
+		ep->buffer1ready = 1;
+		ep->curbufnum = 0;
+	} else {
+		/* None of the ping-pong buffers are ready currently */
+		return -EAGAIN;
+	}
+
+	return xudc_start_dma(ep, src, dst, length);
+}
+
+/**
+ * xudc_eptxrx - Transmits or receives data to or from an endpoint.
+ * @ep: pointer to the usb endpoint configuration structure.
+ * @req: pointer to the usb request structure.
+ * @bufferptr: pointer to buffer containing the data to be sent.
+ * @bufferlen: The number of data bytes to be sent.
+ *
+ * Return: 0 on success, -EAGAIN if no buffer is free.
+ *
+ * This function copies the transmit/receive data to/from the end point buffer
+ * and enables the buffer for transmission/reception.
+ */
+static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req,
+		       u8 *bufferptr, u32 bufferlen)
+{
+	u32 *eprambase;
+	u32 bytestosend;
+	int rc = 0;
+	struct xusb_udc *udc = ep->udc;
+
+	bytestosend = bufferlen;
+	if (udc->dma_enabled) {
+		if (ep->is_in)
+			rc = xudc_dma_send(ep, req, bufferptr, bufferlen);
+		else
+			rc = xudc_dma_receive(ep, req, bufferptr, bufferlen);
+		return rc;
+	}
+	/* Put the transmit buffer into the correct ping-pong buffer.*/
+	if (!ep->curbufnum && !ep->buffer0ready) {
+		/* Get the Buffer address and copy the transmit data.*/
+		eprambase = (u32 __force *)(udc->addr + ep->rambase);
+		if (ep->is_in) {
+			memcpy_toio((void __iomem *)eprambase, bufferptr,
+				    bytestosend);
+			udc->write_fn(udc->addr, ep->offset +
+				      XUSB_EP_BUF0COUNT_OFFSET, bufferlen);
+		} else {
+			memcpy_toio((void __iomem *)bufferptr, eprambase,
+				    bytestosend);
+		}
+		/*
+		 * Enable the buffer for transmission.
+		 */
+		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET,
+			      1 << ep->epnumber);
+		ep->buffer0ready = 1;
+		ep->curbufnum = 1;
+	} else if (ep->curbufnum && !ep->buffer1ready) {
+		/* Get the Buffer address and copy the transmit data.*/
+		eprambase = (u32 __force *)(udc->addr + ep->rambase +
+			     ep->ep_usb.maxpacket);
+		if (ep->is_in) {
+			memcpy_toio((void __iomem *)eprambase, bufferptr,
+				    bytestosend);
+			udc->write_fn(udc->addr, ep->offset +
+				      XUSB_EP_BUF1COUNT_OFFSET, bufferlen);
+		} else {
+			memcpy_toio((void __iomem *)bufferptr, eprambase,
+				    bytestosend);
+		}
+		/*
+		 * Enable the buffer for transmission.
+		 */
+		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET,
+			      1 << (ep->epnumber + XUSB_STATUS_EP_BUFF2_SHIFT));
+		ep->buffer1ready = 1;
+		ep->curbufnum = 0;
+	} else {
+		/* None of the ping-pong buffers are ready currently */
+		return -EAGAIN;
+	}
+	return rc;
+}
+
+/**
+ * xudc_done - Exeutes the endpoint data transfer completion tasks.
+ * @ep: pointer to the usb device endpoint structure.
+ * @req: pointer to the usb request structure.
+ * @status: Status of the data transfer.
+ *
+ * Deletes the message from the queue and updates data transfer completion
+ * status.
+ */
+static void xudc_done(struct xusb_ep *ep, struct xusb_req *req, int status)
+{
+	struct xusb_udc *udc = ep->udc;
+
+	list_del_init(&req->queue);
+
+	if (req->usb_req.status == -EINPROGRESS)
+		req->usb_req.status = status;
+	else
+		status = req->usb_req.status;
+
+	if (status && status != -ESHUTDOWN)
+		dev_dbg(udc->dev, "%s done %p, status %d\n",
+			ep->ep_usb.name, req, status);
+	/* unmap request if DMA is present*/
+	if (udc->dma_enabled && ep->epnumber && req->usb_req.length)
+		usb_gadget_unmap_request(&udc->gadget, &req->usb_req,
+					 ep->is_in);
+
+	if (req->usb_req.complete) {
+		spin_unlock(&udc->lock);
+		req->usb_req.complete(&ep->ep_usb, &req->usb_req);
+		spin_lock(&udc->lock);
+	}
+}
+
+/**
+ * xudc_read_fifo - Reads the data from the given endpoint buffer.
+ * @ep: pointer to the usb device endpoint structure.
+ * @req: pointer to the usb request structure.
+ *
+ * Return: 0 if request is completed and -EAGAIN if not completed.
+ *
+ * Pulls OUT packet data from the endpoint buffer.
+ */
+static int xudc_read_fifo(struct xusb_ep *ep, struct xusb_req *req)
+{
+	u8 *buf;
+	u32 is_short, count, bufferspace;
+	u8 bufoffset;
+	u8 two_pkts = 0;
+	int ret;
+	int retval = -EAGAIN;
+	struct xusb_udc *udc = ep->udc;
+
+	if (ep->buffer0ready && ep->buffer1ready) {
+		dev_dbg(udc->dev, "Packet NOT ready!\n");
+		return retval;
+	}
+top:
+	if (ep->curbufnum)
+		bufoffset = XUSB_EP_BUF1COUNT_OFFSET;
+	else
+		bufoffset = XUSB_EP_BUF0COUNT_OFFSET;
+
+	count = udc->read_fn(udc->addr + ep->offset + bufoffset);
+
+	if (!ep->buffer0ready && !ep->buffer1ready)
+		two_pkts = 1;
+
+	buf = req->usb_req.buf + req->usb_req.actual;
+	prefetchw(buf);
+	bufferspace = req->usb_req.length - req->usb_req.actual;
+	is_short = count < ep->ep_usb.maxpacket;
+
+	if (unlikely(!bufferspace)) {
+		/*
+		 * This happens when the driver's buffer
+		 * is smaller than what the host sent.
+		 * discard the extra data.
+		 */
+		if (req->usb_req.status != -EOVERFLOW)
+			dev_dbg(udc->dev, "%s overflow %d\n",
+				ep->ep_usb.name, count);
+		req->usb_req.status = -EOVERFLOW;
+		xudc_done(ep, req, -EOVERFLOW);
+		return 0;
+	}
+
+	ret = xudc_eptxrx(ep, req, buf, count);
+	switch (ret) {
+	case 0:
+		req->usb_req.actual += min(count, bufferspace);
+		dev_dbg(udc->dev, "read %s, %d bytes%s req %p %d/%d\n",
+			ep->ep_usb.name, count, is_short ? "/S" : "", req,
+			req->usb_req.actual, req->usb_req.length);
+
+		/* Completion */
+		if ((req->usb_req.actual == req->usb_req.length) || is_short) {
+			if (udc->dma_enabled && req->usb_req.length)
+				dma_sync_single_for_cpu(udc->dev,
+							req->usb_req.dma,
+							req->usb_req.actual,
+							DMA_FROM_DEVICE);
+			xudc_done(ep, req, 0);
+			return 0;
+		}
+		if (two_pkts) {
+			two_pkts = 0;
+			goto top;
+		}
+		break;
+	case -EAGAIN:
+		dev_dbg(udc->dev, "receive busy\n");
+		break;
+	case -EINVAL:
+	case -ETIMEDOUT:
+		/* DMA error, dequeue the request */
+		xudc_done(ep, req, -ECONNRESET);
+		retval = 0;
+		break;
+	}
+
+	return retval;
+}
+
+/**
+ * xudc_write_fifo - Writes data into the given endpoint buffer.
+ * @ep: pointer to the usb device endpoint structure.
+ * @req: pointer to the usb request structure.
+ *
+ * Return: 0 if request is completed and -EAGAIN if not completed.
+ *
+ * Loads endpoint buffer for an IN packet.
+ */
+static int xudc_write_fifo(struct xusb_ep *ep, struct xusb_req *req)
+{
+	u32 max;
+	u32 length;
+	int ret;
+	int retval = -EAGAIN;
+	struct xusb_udc *udc = ep->udc;
+	int is_last, is_short = 0;
+	u8 *buf;
+
+	max = le16_to_cpu(ep->desc->wMaxPacketSize);
+	buf = req->usb_req.buf + req->usb_req.actual;
+	prefetch(buf);
+	length = req->usb_req.length - req->usb_req.actual;
+	length = min(length, max);
+
+	ret = xudc_eptxrx(ep, req, buf, length);
+	switch (ret) {
+	case 0:
+		req->usb_req.actual += length;
+		if (unlikely(length != max)) {
+			is_last = is_short = 1;
+		} else {
+			if (likely(req->usb_req.length !=
+				   req->usb_req.actual) || req->usb_req.zero)
+				is_last = 0;
+			else
+				is_last = 1;
+		}
+		dev_dbg(udc->dev, "%s: wrote %s %d bytes%s%s %d left %p\n",
+			__func__, ep->ep_usb.name, length, is_last ? "/L" : "",
+			is_short ? "/S" : "",
+			req->usb_req.length - req->usb_req.actual, req);
+		/* completion */
+		if (is_last) {
+			xudc_done(ep, req, 0);
+			retval = 0;
+		}
+		break;
+	case -EAGAIN:
+		dev_dbg(udc->dev, "Send busy\n");
+		break;
+	case -EINVAL:
+	case -ETIMEDOUT:
+		/* DMA error, dequeue the request */
+		xudc_done(ep, req, -ECONNRESET);
+		retval = 0;
+		break;
+	}
+
+	return retval;
+}
+
+/**
+ * xudc_nuke - Cleans up the data transfer message list.
+ * @ep: pointer to the usb device endpoint structure.
+ * @status: Status of the data transfer.
+ */
+static void xudc_nuke(struct xusb_ep *ep, int status)
+{
+	struct xusb_req *req;
+
+	while (!list_empty(&ep->queue)) {
+		req = list_first_entry(&ep->queue, struct xusb_req, queue);
+		xudc_done(ep, req, status);
+	}
+}
+
+/**
+ * xudc_ep_set_halt - Stalls/unstalls the given endpoint.
+ * @_ep: pointer to the usb device endpoint structure.
+ * @value: value to indicate stall/unstall.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int xudc_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	struct xusb_ep *ep = to_xusb_ep(_ep);
+	struct xusb_udc *udc;
+	unsigned long flags;
+	u32 epcfgreg;
+
+	if (!_ep || (!ep->desc && ep->epnumber)) {
+		pr_debug("%s: bad ep or descriptor\n", __func__);
+		return -EINVAL;
+	}
+	udc = ep->udc;
+
+	if (ep->is_in && (!list_empty(&ep->queue)) && value) {
+		dev_dbg(udc->dev, "requests pending can't halt\n");
+		return -EAGAIN;
+	}
+
+	if (ep->buffer0ready || ep->buffer1ready) {
+		dev_dbg(udc->dev, "HW buffers busy can't halt\n");
+		return -EAGAIN;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (value) {
+		/* Stall the device.*/
+		epcfgreg = udc->read_fn(udc->addr + ep->offset);
+		epcfgreg |= XUSB_EP_CFG_STALL_MASK;
+		udc->write_fn(udc->addr, ep->offset, epcfgreg);
+	} else {
+		/* Unstall the device.*/
+		epcfgreg = udc->read_fn(udc->addr + ep->offset);
+		epcfgreg &= ~XUSB_EP_CFG_STALL_MASK;
+		udc->write_fn(udc->addr, ep->offset, epcfgreg);
+		if (ep->epnumber) {
+			/* Reset the toggle bit.*/
+			epcfgreg = udc->read_fn(ep->udc->addr + ep->offset);
+			epcfgreg &= ~XUSB_EP_CFG_DATA_TOGGLE_MASK;
+			udc->write_fn(udc->addr, ep->offset, epcfgreg);
+		}
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/**
+ * __xudc_ep_enable - Enables the given endpoint.
+ * @ep: pointer to the xusb endpoint structure.
+ * @desc: pointer to usb endpoint descriptor.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int __xudc_ep_enable(struct xusb_ep *ep,
+			    const struct usb_endpoint_descriptor *desc)
+{
+	struct xusb_udc *udc = ep->udc;
+	u32 tmp;
+	u32 epcfg;
+	u32 ier;
+	u16 maxpacket;
+
+	ep->is_in = ((desc->bEndpointAddress & USB_DIR_IN) != 0);
+	/* Bit 3...0:endpoint number */
+	ep->epnumber = (desc->bEndpointAddress & 0x0f);
+	ep->desc = desc;
+	ep->ep_usb.desc = desc;
+	tmp = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	ep->ep_usb.maxpacket = maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+
+	switch (tmp) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		dev_dbg(udc->dev, "only one control endpoint\n");
+		/* NON- ISO */
+		ep->is_iso = 0;
+		return -EINVAL;
+	case USB_ENDPOINT_XFER_INT:
+		/* NON- ISO */
+		ep->is_iso = 0;
+		if (maxpacket > 64) {
+			dev_dbg(udc->dev, "bogus maxpacket %d\n", maxpacket);
+			return -EINVAL;
+		}
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		/* NON- ISO */
+		ep->is_iso = 0;
+		if (!(is_power_of_2(maxpacket) && maxpacket >= 8 &&
+				maxpacket <= 512)) {
+			dev_dbg(udc->dev, "bogus maxpacket %d\n", maxpacket);
+			return -EINVAL;
+		}
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		/* ISO */
+		ep->is_iso = 1;
+		break;
+	}
+
+	ep->buffer0ready = false;
+	ep->buffer1ready = false;
+	ep->curbufnum = 0;
+	ep->rambase = rambase[ep->epnumber];
+	xudc_epconfig(ep, udc);
+
+	dev_dbg(udc->dev, "Enable Endpoint %d max pkt is %d\n",
+		ep->epnumber, maxpacket);
+
+	/* Enable the End point.*/
+	epcfg = udc->read_fn(udc->addr + ep->offset);
+	epcfg |= XUSB_EP_CFG_VALID_MASK;
+	udc->write_fn(udc->addr, ep->offset, epcfg);
+	if (ep->epnumber)
+		ep->rambase <<= 2;
+
+	/* Enable buffer completion interrupts for endpoint */
+	ier = udc->read_fn(udc->addr + XUSB_IER_OFFSET);
+	ier |= (XUSB_STATUS_INTR_BUFF_COMP_SHIFT_MASK << ep->epnumber);
+	udc->write_fn(udc->addr, XUSB_IER_OFFSET, ier);
+
+	/* for OUT endpoint set buffers ready to receive */
+	if (ep->epnumber && !ep->is_in) {
+		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET,
+			      1 << ep->epnumber);
+		ep->buffer0ready = true;
+		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET,
+			     (1 << (ep->epnumber +
+			      XUSB_STATUS_EP_BUFF2_SHIFT)));
+		ep->buffer1ready = true;
+	}
+
+	return 0;
+}
+
+/**
+ * xudc_ep_enable - Enables the given endpoint.
+ * @_ep: pointer to the usb endpoint structure.
+ * @desc: pointer to usb endpoint descriptor.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int xudc_ep_enable(struct usb_ep *_ep,
+			  const struct usb_endpoint_descriptor *desc)
+{
+	struct xusb_ep *ep;
+	struct xusb_udc *udc;
+	unsigned long flags;
+	int ret;
+
+	if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
+		pr_debug("%s: bad ep or descriptor\n", __func__);
+		return -EINVAL;
+	}
+
+	ep = to_xusb_ep(_ep);
+	udc = ep->udc;
+
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
+		dev_dbg(udc->dev, "bogus device state\n");
+		return -ESHUTDOWN;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	ret = __xudc_ep_enable(ep, desc);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return ret;
+}
+
+/**
+ * xudc_ep_disable - Disables the given endpoint.
+ * @_ep: pointer to the usb endpoint structure.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int xudc_ep_disable(struct usb_ep *_ep)
+{
+	struct xusb_ep *ep;
+	unsigned long flags;
+	u32 epcfg;
+	struct xusb_udc *udc;
+
+	if (!_ep) {
+		pr_debug("%s: invalid ep\n", __func__);
+		return -EINVAL;
+	}
+
+	ep = to_xusb_ep(_ep);
+	udc = ep->udc;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	xudc_nuke(ep, -ESHUTDOWN);
+
+	/* Restore the endpoint's pristine config */
+	ep->desc = NULL;
+	ep->ep_usb.desc = NULL;
+
+	dev_dbg(udc->dev, "USB Ep %d disable\n ", ep->epnumber);
+	/* Disable the endpoint.*/
+	epcfg = udc->read_fn(udc->addr + ep->offset);
+	epcfg &= ~XUSB_EP_CFG_VALID_MASK;
+	udc->write_fn(udc->addr, ep->offset, epcfg);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/**
+ * xudc_ep_alloc_request - Initializes the request queue.
+ * @_ep: pointer to the usb endpoint structure.
+ * @gfp_flags: Flags related to the request call.
+ *
+ * Return: pointer to request structure on success and a NULL on failure.
+ */
+static struct usb_request *xudc_ep_alloc_request(struct usb_ep *_ep,
+						 gfp_t gfp_flags)
+{
+	struct xusb_ep *ep = to_xusb_ep(_ep);
+	struct xusb_req *req;
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	req->ep = ep;
+	INIT_LIST_HEAD(&req->queue);
+	return &req->usb_req;
+}
+
+/**
+ * xudc_free_request - Releases the request from queue.
+ * @_ep: pointer to the usb device endpoint structure.
+ * @_req: pointer to the usb request structure.
+ */
+static void xudc_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct xusb_req *req = to_xusb_req(_req);
+
+	kfree(req);
+}
+
+/**
+ * __xudc_ep0_queue - Adds the request to endpoint 0 queue.
+ * @ep0: pointer to the xusb endpoint 0 structure.
+ * @req: pointer to the xusb request structure.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int __xudc_ep0_queue(struct xusb_ep *ep0, struct xusb_req *req)
+{
+	struct xusb_udc *udc = ep0->udc;
+	u32 length;
+	u8 *corebuf;
+
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
+		dev_dbg(udc->dev, "%s, bogus device state\n", __func__);
+		return -EINVAL;
+	}
+	if (!list_empty(&ep0->queue)) {
+		dev_dbg(udc->dev, "%s:ep0 busy\n", __func__);
+		return -EBUSY;
+	}
+
+	req->usb_req.status = -EINPROGRESS;
+	req->usb_req.actual = 0;
+
+	list_add_tail(&req->queue, &ep0->queue);
+
+	if (udc->setup.bRequestType & USB_DIR_IN) {
+		prefetch(req->usb_req.buf);
+		length = req->usb_req.length;
+		corebuf = (void __force *) ((ep0->rambase << 2) +
+			   udc->addr);
+		length = req->usb_req.actual = min_t(u32, length,
+						     EP0_MAX_PACKET);
+		memcpy_toio((void __iomem *)corebuf, req->usb_req.buf, length);
+		udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, length);
+		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1);
+	} else {
+		if (udc->setup.wLength) {
+			/* Enable EP0 buffer to receive data */
+			udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, 0);
+			udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1);
+		} else {
+			xudc_wrstatus(udc);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * xudc_ep0_queue - Adds the request to endpoint 0 queue.
+ * @_ep: pointer to the usb endpoint 0 structure.
+ * @_req: pointer to the usb request structure.
+ * @gfp_flags: Flags related to the request call.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int xudc_ep0_queue(struct usb_ep *_ep, struct usb_request *_req,
+			  gfp_t gfp_flags)
+{
+	struct xusb_req *req	= to_xusb_req(_req);
+	struct xusb_ep	*ep0	= to_xusb_ep(_ep);
+	struct xusb_udc *udc	= ep0->udc;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	ret = __xudc_ep0_queue(ep0, req);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return ret;
+}
+
+/**
+ * xudc_ep_queue - Adds the request to endpoint queue.
+ * @_ep: pointer to the usb endpoint structure.
+ * @_req: pointer to the usb request structure.
+ * @gfp_flags: Flags related to the request call.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int xudc_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+			 gfp_t gfp_flags)
+{
+	struct xusb_req *req = to_xusb_req(_req);
+	struct xusb_ep	*ep  = to_xusb_ep(_ep);
+	struct xusb_udc *udc = ep->udc;
+	int  ret;
+	unsigned long flags;
+
+	if (!ep->desc) {
+		dev_dbg(udc->dev, "%s: queuing request to disabled %s\n",
+			__func__, ep->name);
+		return -ESHUTDOWN;
+	}
+
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
+		dev_dbg(udc->dev, "%s, bogus device state\n", __func__);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	if (udc->dma_enabled) {
+		ret = usb_gadget_map_request(&udc->gadget, &req->usb_req,
+					     ep->is_in);
+		if (ret) {
+			dev_dbg(udc->dev, "gadget_map failed ep%d\n",
+				ep->epnumber);
+			spin_unlock_irqrestore(&udc->lock, flags);
+			return -EAGAIN;
+		}
+	}
+
+	if (list_empty(&ep->queue)) {
+		if (ep->is_in) {
+			dev_dbg(udc->dev, "xudc_write_fifo from ep_queue\n");
+			if (!xudc_write_fifo(ep, req))
+				req = NULL;
+		} else {
+			dev_dbg(udc->dev, "xudc_read_fifo from ep_queue\n");
+			if (!xudc_read_fifo(ep, req))
+				req = NULL;
+		}
+	}
+
+	if (req != NULL)
+		list_add_tail(&req->queue, &ep->queue);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/**
+ * xudc_ep_dequeue - Removes the request from the queue.
+ * @_ep: pointer to the usb device endpoint structure.
+ * @_req: pointer to the usb request structure.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int xudc_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct xusb_ep *ep	= to_xusb_ep(_ep);
+	struct xusb_req *req	= NULL;
+	struct xusb_req *iter;
+	struct xusb_udc *udc	= ep->udc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	/* Make sure it's actually queued on this endpoint */
+	list_for_each_entry(iter, &ep->queue, queue) {
+		if (&iter->usb_req != _req)
+			continue;
+		req = iter;
+		break;
+	}
+	if (!req) {
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return -EINVAL;
+	}
+	xudc_done(ep, req, -ECONNRESET);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/**
+ * xudc_ep0_enable - Enables the given endpoint.
+ * @ep: pointer to the usb endpoint structure.
+ * @desc: pointer to usb endpoint descriptor.
+ *
+ * Return: error always.
+ *
+ * endpoint 0 enable should not be called by gadget layer.
+ */
+static int xudc_ep0_enable(struct usb_ep *ep,
+			   const struct usb_endpoint_descriptor *desc)
+{
+	return -EINVAL;
+}
+
+/**
+ * xudc_ep0_disable - Disables the given endpoint.
+ * @ep: pointer to the usb endpoint structure.
+ *
+ * Return: error always.
+ *
+ * endpoint 0 disable should not be called by gadget layer.
+ */
+static int xudc_ep0_disable(struct usb_ep *ep)
+{
+	return -EINVAL;
+}
+
+static const struct usb_ep_ops xusb_ep0_ops = {
+	.enable		= xudc_ep0_enable,
+	.disable	= xudc_ep0_disable,
+	.alloc_request	= xudc_ep_alloc_request,
+	.free_request	= xudc_free_request,
+	.queue		= xudc_ep0_queue,
+	.dequeue	= xudc_ep_dequeue,
+	.set_halt	= xudc_ep_set_halt,
+};
+
+static const struct usb_ep_ops xusb_ep_ops = {
+	.enable		= xudc_ep_enable,
+	.disable	= xudc_ep_disable,
+	.alloc_request	= xudc_ep_alloc_request,
+	.free_request	= xudc_free_request,
+	.queue		= xudc_ep_queue,
+	.dequeue	= xudc_ep_dequeue,
+	.set_halt	= xudc_ep_set_halt,
+};
+
+/**
+ * xudc_get_frame - Reads the current usb frame number.
+ * @gadget: pointer to the usb gadget structure.
+ *
+ * Return: current frame number for success and error value on failure.
+ */
+static int xudc_get_frame(struct usb_gadget *gadget)
+{
+	struct xusb_udc *udc;
+	int frame;
+
+	if (!gadget)
+		return -ENODEV;
+
+	udc = to_udc(gadget);
+	frame = udc->read_fn(udc->addr + XUSB_FRAMENUM_OFFSET);
+	return frame;
+}
+
+/**
+ * xudc_wakeup - Send remote wakeup signal to host
+ * @gadget: pointer to the usb gadget structure.
+ *
+ * Return: 0 on success and error on failure
+ */
+static int xudc_wakeup(struct usb_gadget *gadget)
+{
+	struct xusb_udc *udc = to_udc(gadget);
+	u32 crtlreg;
+	int status = -EINVAL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* Remote wake up not enabled by host */
+	if (!udc->remote_wkp)
+		goto done;
+
+	crtlreg = udc->read_fn(udc->addr + XUSB_CONTROL_OFFSET);
+	crtlreg |= XUSB_CONTROL_USB_RMTWAKE_MASK;
+	/* set remote wake up bit */
+	udc->write_fn(udc->addr, XUSB_CONTROL_OFFSET, crtlreg);
+	/*
+	 * wait for a while and reset remote wake up bit since this bit
+	 * is not cleared by HW after sending remote wakeup to host.
+	 */
+	mdelay(2);
+
+	crtlreg &= ~XUSB_CONTROL_USB_RMTWAKE_MASK;
+	udc->write_fn(udc->addr, XUSB_CONTROL_OFFSET, crtlreg);
+	status = 0;
+done:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return status;
+}
+
+/**
+ * xudc_pullup - start/stop USB traffic
+ * @gadget: pointer to the usb gadget structure.
+ * @is_on: flag to start or stop
+ *
+ * Return: 0 always
+ *
+ * This function starts/stops SIE engine of IP based on is_on.
+ */
+static int xudc_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct xusb_udc *udc = to_udc(gadget);
+	unsigned long flags;
+	u32 crtlreg;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	crtlreg = udc->read_fn(udc->addr + XUSB_CONTROL_OFFSET);
+	if (is_on)
+		crtlreg |= XUSB_CONTROL_USB_READY_MASK;
+	else
+		crtlreg &= ~XUSB_CONTROL_USB_READY_MASK;
+
+	udc->write_fn(udc->addr, XUSB_CONTROL_OFFSET, crtlreg);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/**
+ * xudc_eps_init - initialize endpoints.
+ * @udc: pointer to the usb device controller structure.
+ */
+static void xudc_eps_init(struct xusb_udc *udc)
+{
+	u32 ep_number;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+
+	for (ep_number = 0; ep_number < XUSB_MAX_ENDPOINTS; ep_number++) {
+		struct xusb_ep *ep = &udc->ep[ep_number];
+
+		if (ep_number) {
+			list_add_tail(&ep->ep_usb.ep_list,
+				      &udc->gadget.ep_list);
+			usb_ep_set_maxpacket_limit(&ep->ep_usb,
+						  (unsigned short) ~0);
+			snprintf(ep->name, EPNAME_SIZE, "ep%d", ep_number);
+			ep->ep_usb.name = ep->name;
+			ep->ep_usb.ops = &xusb_ep_ops;
+
+			ep->ep_usb.caps.type_iso = true;
+			ep->ep_usb.caps.type_bulk = true;
+			ep->ep_usb.caps.type_int = true;
+		} else {
+			ep->ep_usb.name = ep0name;
+			usb_ep_set_maxpacket_limit(&ep->ep_usb, EP0_MAX_PACKET);
+			ep->ep_usb.ops = &xusb_ep0_ops;
+
+			ep->ep_usb.caps.type_control = true;
+		}
+
+		ep->ep_usb.caps.dir_in = true;
+		ep->ep_usb.caps.dir_out = true;
+
+		ep->udc = udc;
+		ep->epnumber = ep_number;
+		ep->desc = NULL;
+		/*
+		 * The configuration register address offset between
+		 * each endpoint is 0x10.
+		 */
+		ep->offset = XUSB_EP0_CONFIG_OFFSET + (ep_number * 0x10);
+		ep->is_in = 0;
+		ep->is_iso = 0;
+		ep->maxpacket = 0;
+		xudc_epconfig(ep, udc);
+
+		/* Initialize one queue per endpoint */
+		INIT_LIST_HEAD(&ep->queue);
+	}
+}
+
+/**
+ * xudc_stop_activity - Stops any further activity on the device.
+ * @udc: pointer to the usb device controller structure.
+ */
+static void xudc_stop_activity(struct xusb_udc *udc)
+{
+	int i;
+	struct xusb_ep *ep;
+
+	for (i = 0; i < XUSB_MAX_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+		xudc_nuke(ep, -ESHUTDOWN);
+	}
+}
+
+/**
+ * xudc_start - Starts the device.
+ * @gadget: pointer to the usb gadget structure
+ * @driver: pointer to gadget driver structure
+ *
+ * Return: zero on success and error on failure
+ */
+static int xudc_start(struct usb_gadget *gadget,
+		      struct usb_gadget_driver *driver)
+{
+	struct xusb_udc *udc	= to_udc(gadget);
+	struct xusb_ep *ep0	= &udc->ep[XUSB_EP_NUMBER_ZERO];
+	const struct usb_endpoint_descriptor *desc = &config_bulk_out_desc;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (udc->driver) {
+		dev_err(udc->dev, "%s is already bound to %s\n",
+			udc->gadget.name, udc->driver->driver.name);
+		ret = -EBUSY;
+		goto err;
+	}
+
+	/* hook up the driver */
+	udc->driver = driver;
+	udc->gadget.speed = driver->max_speed;
+
+	/* Enable the control endpoint. */
+	ret = __xudc_ep_enable(ep0, desc);
+
+	/* Set device address and remote wakeup to 0 */
+	udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET, 0);
+	udc->remote_wkp = 0;
+err:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return ret;
+}
+
+/**
+ * xudc_stop - stops the device.
+ * @gadget: pointer to the usb gadget structure
+ *
+ * Return: zero always
+ */
+static int xudc_stop(struct usb_gadget *gadget)
+{
+	struct xusb_udc *udc = to_udc(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->driver = NULL;
+
+	/* Set device address and remote wakeup to 0 */
+	udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET, 0);
+	udc->remote_wkp = 0;
+
+	xudc_stop_activity(udc);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops xusb_udc_ops = {
+	.get_frame	= xudc_get_frame,
+	.wakeup		= xudc_wakeup,
+	.pullup		= xudc_pullup,
+	.udc_start	= xudc_start,
+	.udc_stop	= xudc_stop,
+};
+
+/**
+ * xudc_clear_stall_all_ep - clears stall of every endpoint.
+ * @udc: pointer to the udc structure.
+ */
+static void xudc_clear_stall_all_ep(struct xusb_udc *udc)
+{
+	struct xusb_ep *ep;
+	u32 epcfgreg;
+	int i;
+
+	for (i = 0; i < XUSB_MAX_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+		epcfgreg = udc->read_fn(udc->addr + ep->offset);
+		epcfgreg &= ~XUSB_EP_CFG_STALL_MASK;
+		udc->write_fn(udc->addr, ep->offset, epcfgreg);
+		if (ep->epnumber) {
+			/* Reset the toggle bit.*/
+			epcfgreg = udc->read_fn(udc->addr + ep->offset);
+			epcfgreg &= ~XUSB_EP_CFG_DATA_TOGGLE_MASK;
+			udc->write_fn(udc->addr, ep->offset, epcfgreg);
+		}
+	}
+}
+
+/**
+ * xudc_startup_handler - The usb device controller interrupt handler.
+ * @udc: pointer to the udc structure.
+ * @intrstatus: The mask value containing the interrupt sources.
+ *
+ * This function handles the RESET,SUSPEND,RESUME and DISCONNECT interrupts.
+ */
+static void xudc_startup_handler(struct xusb_udc *udc, u32 intrstatus)
+{
+	u32 intrreg;
+
+	if (intrstatus & XUSB_STATUS_RESET_MASK) {
+
+		dev_dbg(udc->dev, "Reset\n");
+
+		if (intrstatus & XUSB_STATUS_HIGH_SPEED_MASK)
+			udc->gadget.speed = USB_SPEED_HIGH;
+		else
+			udc->gadget.speed = USB_SPEED_FULL;
+
+		xudc_stop_activity(udc);
+		xudc_clear_stall_all_ep(udc);
+		udc->write_fn(udc->addr, XUSB_TESTMODE_OFFSET, 0);
+
+		/* Set device address and remote wakeup to 0 */
+		udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET, 0);
+		udc->remote_wkp = 0;
+
+		/* Enable the suspend, resume and disconnect */
+		intrreg = udc->read_fn(udc->addr + XUSB_IER_OFFSET);
+		intrreg |= XUSB_STATUS_SUSPEND_MASK | XUSB_STATUS_RESUME_MASK |
+			   XUSB_STATUS_DISCONNECT_MASK;
+		udc->write_fn(udc->addr, XUSB_IER_OFFSET, intrreg);
+	}
+	if (intrstatus & XUSB_STATUS_SUSPEND_MASK) {
+
+		dev_dbg(udc->dev, "Suspend\n");
+
+		/* Enable the reset, resume and disconnect */
+		intrreg = udc->read_fn(udc->addr + XUSB_IER_OFFSET);
+		intrreg |= XUSB_STATUS_RESET_MASK | XUSB_STATUS_RESUME_MASK |
+			   XUSB_STATUS_DISCONNECT_MASK;
+		udc->write_fn(udc->addr, XUSB_IER_OFFSET, intrreg);
+
+		udc->usb_state = USB_STATE_SUSPENDED;
+
+		if (udc->driver->suspend) {
+			spin_unlock(&udc->lock);
+			udc->driver->suspend(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+	if (intrstatus & XUSB_STATUS_RESUME_MASK) {
+		bool condition = (udc->usb_state != USB_STATE_SUSPENDED);
+
+		dev_WARN_ONCE(udc->dev, condition,
+				"Resume IRQ while not suspended\n");
+
+		dev_dbg(udc->dev, "Resume\n");
+
+		/* Enable the reset, suspend and disconnect */
+		intrreg = udc->read_fn(udc->addr + XUSB_IER_OFFSET);
+		intrreg |= XUSB_STATUS_RESET_MASK | XUSB_STATUS_SUSPEND_MASK |
+			   XUSB_STATUS_DISCONNECT_MASK;
+		udc->write_fn(udc->addr, XUSB_IER_OFFSET, intrreg);
+
+		udc->usb_state = 0;
+
+		if (udc->driver->resume) {
+			spin_unlock(&udc->lock);
+			udc->driver->resume(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+	if (intrstatus & XUSB_STATUS_DISCONNECT_MASK) {
+
+		dev_dbg(udc->dev, "Disconnect\n");
+
+		/* Enable the reset, resume and suspend */
+		intrreg = udc->read_fn(udc->addr + XUSB_IER_OFFSET);
+		intrreg |= XUSB_STATUS_RESET_MASK | XUSB_STATUS_RESUME_MASK |
+			   XUSB_STATUS_SUSPEND_MASK;
+		udc->write_fn(udc->addr, XUSB_IER_OFFSET, intrreg);
+
+		if (udc->driver && udc->driver->disconnect) {
+			spin_unlock(&udc->lock);
+			udc->driver->disconnect(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+}
+
+/**
+ * xudc_ep0_stall - Stall endpoint zero.
+ * @udc: pointer to the udc structure.
+ *
+ * This function stalls endpoint zero.
+ */
+static void xudc_ep0_stall(struct xusb_udc *udc)
+{
+	u32 epcfgreg;
+	struct xusb_ep *ep0 = &udc->ep[XUSB_EP_NUMBER_ZERO];
+
+	epcfgreg = udc->read_fn(udc->addr + ep0->offset);
+	epcfgreg |= XUSB_EP_CFG_STALL_MASK;
+	udc->write_fn(udc->addr, ep0->offset, epcfgreg);
+}
+
+/**
+ * xudc_setaddress - executes SET_ADDRESS command
+ * @udc: pointer to the udc structure.
+ *
+ * This function executes USB SET_ADDRESS command
+ */
+static void xudc_setaddress(struct xusb_udc *udc)
+{
+	struct xusb_ep *ep0	= &udc->ep[0];
+	struct xusb_req *req	= udc->req;
+	int ret;
+
+	req->usb_req.length = 0;
+	ret = __xudc_ep0_queue(ep0, req);
+	if (ret == 0)
+		return;
+
+	dev_err(udc->dev, "Can't respond to SET ADDRESS request\n");
+	xudc_ep0_stall(udc);
+}
+
+/**
+ * xudc_getstatus - executes GET_STATUS command
+ * @udc: pointer to the udc structure.
+ *
+ * This function executes USB GET_STATUS command
+ */
+static void xudc_getstatus(struct xusb_udc *udc)
+{
+	struct xusb_ep *ep0	= &udc->ep[0];
+	struct xusb_req *req	= udc->req;
+	struct xusb_ep *target_ep;
+	u16 status = 0;
+	u32 epcfgreg;
+	int epnum;
+	u32 halt;
+	int ret;
+
+	switch (udc->setup.bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		/* Get device status */
+		status = 1 << USB_DEVICE_SELF_POWERED;
+		if (udc->remote_wkp)
+			status |= (1 << USB_DEVICE_REMOTE_WAKEUP);
+		break;
+	case USB_RECIP_INTERFACE:
+		break;
+	case USB_RECIP_ENDPOINT:
+		epnum = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK;
+		if (epnum >= XUSB_MAX_ENDPOINTS)
+			goto stall;
+		target_ep = &udc->ep[epnum];
+		epcfgreg = udc->read_fn(udc->addr + target_ep->offset);
+		halt = epcfgreg & XUSB_EP_CFG_STALL_MASK;
+		if (udc->setup.wIndex & USB_DIR_IN) {
+			if (!target_ep->is_in)
+				goto stall;
+		} else {
+			if (target_ep->is_in)
+				goto stall;
+		}
+		if (halt)
+			status = 1 << USB_ENDPOINT_HALT;
+		break;
+	default:
+		goto stall;
+	}
+
+	req->usb_req.length = 2;
+	*(u16 *)req->usb_req.buf = cpu_to_le16(status);
+	ret = __xudc_ep0_queue(ep0, req);
+	if (ret == 0)
+		return;
+stall:
+	dev_err(udc->dev, "Can't respond to getstatus request\n");
+	xudc_ep0_stall(udc);
+}
+
+/**
+ * xudc_set_clear_feature - Executes the set feature and clear feature commands.
+ * @udc: pointer to the usb device controller structure.
+ *
+ * Processes the SET_FEATURE and CLEAR_FEATURE commands.
+ */
+static void xudc_set_clear_feature(struct xusb_udc *udc)
+{
+	struct xusb_ep *ep0	= &udc->ep[0];
+	struct xusb_req *req	= udc->req;
+	struct xusb_ep *target_ep;
+	u8 endpoint;
+	u8 outinbit;
+	u32 epcfgreg;
+	int flag = (udc->setup.bRequest == USB_REQ_SET_FEATURE ? 1 : 0);
+	int ret;
+
+	switch (udc->setup.bRequestType) {
+	case USB_RECIP_DEVICE:
+		switch (udc->setup.wValue) {
+		case USB_DEVICE_TEST_MODE:
+			/*
+			 * The Test Mode will be executed
+			 * after the status phase.
+			 */
+			break;
+		case USB_DEVICE_REMOTE_WAKEUP:
+			if (flag)
+				udc->remote_wkp = 1;
+			else
+				udc->remote_wkp = 0;
+			break;
+		default:
+			xudc_ep0_stall(udc);
+			break;
+		}
+		break;
+	case USB_RECIP_ENDPOINT:
+		if (!udc->setup.wValue) {
+			endpoint = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK;
+			if (endpoint >= XUSB_MAX_ENDPOINTS) {
+				xudc_ep0_stall(udc);
+				return;
+			}
+			target_ep = &udc->ep[endpoint];
+			outinbit = udc->setup.wIndex & USB_ENDPOINT_DIR_MASK;
+			outinbit = outinbit >> 7;
+
+			/* Make sure direction matches.*/
+			if (outinbit != target_ep->is_in) {
+				xudc_ep0_stall(udc);
+				return;
+			}
+			epcfgreg = udc->read_fn(udc->addr + target_ep->offset);
+			if (!endpoint) {
+				/* Clear the stall.*/
+				epcfgreg &= ~XUSB_EP_CFG_STALL_MASK;
+				udc->write_fn(udc->addr,
+					      target_ep->offset, epcfgreg);
+			} else {
+				if (flag) {
+					epcfgreg |= XUSB_EP_CFG_STALL_MASK;
+					udc->write_fn(udc->addr,
+						      target_ep->offset,
+						      epcfgreg);
+				} else {
+					/* Unstall the endpoint.*/
+					epcfgreg &= ~(XUSB_EP_CFG_STALL_MASK |
+						XUSB_EP_CFG_DATA_TOGGLE_MASK);
+					udc->write_fn(udc->addr,
+						      target_ep->offset,
+						      epcfgreg);
+				}
+			}
+		}
+		break;
+	default:
+		xudc_ep0_stall(udc);
+		return;
+	}
+
+	req->usb_req.length = 0;
+	ret = __xudc_ep0_queue(ep0, req);
+	if (ret == 0)
+		return;
+
+	dev_err(udc->dev, "Can't respond to SET/CLEAR FEATURE\n");
+	xudc_ep0_stall(udc);
+}
+
+/**
+ * xudc_handle_setup - Processes the setup packet.
+ * @udc: pointer to the usb device controller structure.
+ *
+ * Process setup packet and delegate to gadget layer.
+ */
+static void xudc_handle_setup(struct xusb_udc *udc)
+	__must_hold(&udc->lock)
+{
+	struct xusb_ep *ep0 = &udc->ep[0];
+	struct usb_ctrlrequest setup;
+	u32 *ep0rambase;
+
+	/* Load up the chapter 9 command buffer.*/
+	ep0rambase = (u32 __force *) (udc->addr + XUSB_SETUP_PKT_ADDR_OFFSET);
+	memcpy_toio((void __iomem *)&setup, ep0rambase, 8);
+
+	udc->setup = setup;
+	udc->setup.wValue = cpu_to_le16(setup.wValue);
+	udc->setup.wIndex = cpu_to_le16(setup.wIndex);
+	udc->setup.wLength = cpu_to_le16(setup.wLength);
+
+	/* Clear previous requests */
+	xudc_nuke(ep0, -ECONNRESET);
+
+	if (udc->setup.bRequestType & USB_DIR_IN) {
+		/* Execute the get command.*/
+		udc->setupseqrx = STATUS_PHASE;
+		udc->setupseqtx = DATA_PHASE;
+	} else {
+		/* Execute the put command.*/
+		udc->setupseqrx = DATA_PHASE;
+		udc->setupseqtx = STATUS_PHASE;
+	}
+
+	switch (udc->setup.bRequest) {
+	case USB_REQ_GET_STATUS:
+		/* Data+Status phase form udc */
+		if ((udc->setup.bRequestType &
+				(USB_DIR_IN | USB_TYPE_MASK)) !=
+				(USB_DIR_IN | USB_TYPE_STANDARD))
+			break;
+		xudc_getstatus(udc);
+		return;
+	case USB_REQ_SET_ADDRESS:
+		/* Status phase from udc */
+		if (udc->setup.bRequestType != (USB_DIR_OUT |
+				USB_TYPE_STANDARD | USB_RECIP_DEVICE))
+			break;
+		xudc_setaddress(udc);
+		return;
+	case USB_REQ_CLEAR_FEATURE:
+	case USB_REQ_SET_FEATURE:
+		/* Requests with no data phase, status phase from udc */
+		if ((udc->setup.bRequestType & USB_TYPE_MASK)
+				!= USB_TYPE_STANDARD)
+			break;
+		xudc_set_clear_feature(udc);
+		return;
+	default:
+		break;
+	}
+
+	spin_unlock(&udc->lock);
+	if (udc->driver->setup(&udc->gadget, &setup) < 0)
+		xudc_ep0_stall(udc);
+	spin_lock(&udc->lock);
+}
+
+/**
+ * xudc_ep0_out - Processes the endpoint 0 OUT token.
+ * @udc: pointer to the usb device controller structure.
+ */
+static void xudc_ep0_out(struct xusb_udc *udc)
+{
+	struct xusb_ep *ep0 = &udc->ep[0];
+	struct xusb_req *req;
+	u8 *ep0rambase;
+	unsigned int bytes_to_rx;
+	void *buffer;
+
+	req = list_first_entry(&ep0->queue, struct xusb_req, queue);
+
+	switch (udc->setupseqrx) {
+	case STATUS_PHASE:
+		/*
+		 * This resets both state machines for the next
+		 * Setup packet.
+		 */
+		udc->setupseqrx = SETUP_PHASE;
+		udc->setupseqtx = SETUP_PHASE;
+		req->usb_req.actual = req->usb_req.length;
+		xudc_done(ep0, req, 0);
+		break;
+	case DATA_PHASE:
+		bytes_to_rx = udc->read_fn(udc->addr +
+					   XUSB_EP_BUF0COUNT_OFFSET);
+		/* Copy the data to be received from the DPRAM. */
+		ep0rambase = (u8 __force *) (udc->addr +
+			     (ep0->rambase << 2));
+		buffer = req->usb_req.buf + req->usb_req.actual;
+		req->usb_req.actual = req->usb_req.actual + bytes_to_rx;
+		memcpy_toio((void __iomem *)buffer, ep0rambase, bytes_to_rx);
+
+		if (req->usb_req.length == req->usb_req.actual) {
+			/* Data transfer completed get ready for Status stage */
+			xudc_wrstatus(udc);
+		} else {
+			/* Enable EP0 buffer to receive data */
+			udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, 0);
+			udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ * xudc_ep0_in - Processes the endpoint 0 IN token.
+ * @udc: pointer to the usb device controller structure.
+ */
+static void xudc_ep0_in(struct xusb_udc *udc)
+{
+	struct xusb_ep *ep0 = &udc->ep[0];
+	struct xusb_req *req;
+	unsigned int bytes_to_tx;
+	void *buffer;
+	u32 epcfgreg;
+	u16 count = 0;
+	u16 length;
+	u8 *ep0rambase;
+	u8 test_mode = udc->setup.wIndex >> 8;
+
+	req = list_first_entry(&ep0->queue, struct xusb_req, queue);
+	bytes_to_tx = req->usb_req.length - req->usb_req.actual;
+
+	switch (udc->setupseqtx) {
+	case STATUS_PHASE:
+		switch (udc->setup.bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			/* Set the address of the device.*/
+			udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET,
+				      udc->setup.wValue);
+			break;
+		case USB_REQ_SET_FEATURE:
+			if (udc->setup.bRequestType ==
+					USB_RECIP_DEVICE) {
+				if (udc->setup.wValue ==
+						USB_DEVICE_TEST_MODE)
+					udc->write_fn(udc->addr,
+						      XUSB_TESTMODE_OFFSET,
+						      test_mode);
+			}
+			break;
+		}
+		req->usb_req.actual = req->usb_req.length;
+		xudc_done(ep0, req, 0);
+		break;
+	case DATA_PHASE:
+		if (!bytes_to_tx) {
+			/*
+			 * We're done with data transfer, next
+			 * will be zero length OUT with data toggle of
+			 * 1. Setup data_toggle.
+			 */
+			epcfgreg = udc->read_fn(udc->addr + ep0->offset);
+			epcfgreg |= XUSB_EP_CFG_DATA_TOGGLE_MASK;
+			udc->write_fn(udc->addr, ep0->offset, epcfgreg);
+			udc->setupseqtx = STATUS_PHASE;
+		} else {
+			length = count = min_t(u32, bytes_to_tx,
+					       EP0_MAX_PACKET);
+			/* Copy the data to be transmitted into the DPRAM. */
+			ep0rambase = (u8 __force *) (udc->addr +
+				     (ep0->rambase << 2));
+			buffer = req->usb_req.buf + req->usb_req.actual;
+			req->usb_req.actual = req->usb_req.actual + length;
+			memcpy_toio((void __iomem *)ep0rambase, buffer, length);
+		}
+		udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, count);
+		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1);
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ * xudc_ctrl_ep_handler - Endpoint 0 interrupt handler.
+ * @udc: pointer to the udc structure.
+ * @intrstatus:	It's the mask value for the interrupt sources on endpoint 0.
+ *
+ * Processes the commands received during enumeration phase.
+ */
+static void xudc_ctrl_ep_handler(struct xusb_udc *udc, u32 intrstatus)
+{
+
+	if (intrstatus & XUSB_STATUS_SETUP_PACKET_MASK) {
+		xudc_handle_setup(udc);
+	} else {
+		if (intrstatus & XUSB_STATUS_FIFO_BUFF_RDY_MASK)
+			xudc_ep0_out(udc);
+		else if (intrstatus & XUSB_STATUS_FIFO_BUFF_FREE_MASK)
+			xudc_ep0_in(udc);
+	}
+}
+
+/**
+ * xudc_nonctrl_ep_handler - Non control endpoint interrupt handler.
+ * @udc: pointer to the udc structure.
+ * @epnum: End point number for which the interrupt is to be processed
+ * @intrstatus:	mask value for interrupt sources of endpoints other
+ *		than endpoint 0.
+ *
+ * Processes the buffer completion interrupts.
+ */
+static void xudc_nonctrl_ep_handler(struct xusb_udc *udc, u8 epnum,
+				    u32 intrstatus)
+{
+
+	struct xusb_req *req;
+	struct xusb_ep *ep;
+
+	ep = &udc->ep[epnum];
+	/* Process the End point interrupts.*/
+	if (intrstatus & (XUSB_STATUS_EP0_BUFF1_COMP_MASK << epnum))
+		ep->buffer0ready = 0;
+	if (intrstatus & (XUSB_STATUS_EP0_BUFF2_COMP_MASK << epnum))
+		ep->buffer1ready = false;
+
+	if (list_empty(&ep->queue))
+		return;
+
+	req = list_first_entry(&ep->queue, struct xusb_req, queue);
+
+	if (ep->is_in)
+		xudc_write_fifo(ep, req);
+	else
+		xudc_read_fifo(ep, req);
+}
+
+/**
+ * xudc_irq - The main interrupt handler.
+ * @irq: The interrupt number.
+ * @_udc: pointer to the usb device controller structure.
+ *
+ * Return: IRQ_HANDLED after the interrupt is handled.
+ */
+static irqreturn_t xudc_irq(int irq, void *_udc)
+{
+	struct xusb_udc *udc = _udc;
+	u32 intrstatus;
+	u32 ier;
+	u8 index;
+	u32 bufintr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/*
+	 * Event interrupts are level sensitive hence first disable
+	 * IER, read ISR and figure out active interrupts.
+	 */
+	ier = udc->read_fn(udc->addr + XUSB_IER_OFFSET);
+	ier &= ~XUSB_STATUS_INTR_EVENT_MASK;
+	udc->write_fn(udc->addr, XUSB_IER_OFFSET, ier);
+
+	/* Read the Interrupt Status Register.*/
+	intrstatus = udc->read_fn(udc->addr + XUSB_STATUS_OFFSET);
+
+	/* Call the handler for the event interrupt.*/
+	if (intrstatus & XUSB_STATUS_INTR_EVENT_MASK) {
+		/*
+		 * Check if there is any action to be done for :
+		 * - USB Reset received {XUSB_STATUS_RESET_MASK}
+		 * - USB Suspend received {XUSB_STATUS_SUSPEND_MASK}
+		 * - USB Resume received {XUSB_STATUS_RESUME_MASK}
+		 * - USB Disconnect received {XUSB_STATUS_DISCONNECT_MASK}
+		 */
+		xudc_startup_handler(udc, intrstatus);
+	}
+
+	/* Check the buffer completion interrupts */
+	if (intrstatus & XUSB_STATUS_INTR_BUFF_COMP_ALL_MASK) {
+		/* Enable Reset, Suspend, Resume and Disconnect  */
+		ier = udc->read_fn(udc->addr + XUSB_IER_OFFSET);
+		ier |= XUSB_STATUS_INTR_EVENT_MASK;
+		udc->write_fn(udc->addr, XUSB_IER_OFFSET, ier);
+
+		if (intrstatus & XUSB_STATUS_EP0_BUFF1_COMP_MASK)
+			xudc_ctrl_ep_handler(udc, intrstatus);
+
+		for (index = 1; index < 8; index++) {
+			bufintr = ((intrstatus &
+				  (XUSB_STATUS_EP1_BUFF1_COMP_MASK <<
+				  (index - 1))) || (intrstatus &
+				  (XUSB_STATUS_EP1_BUFF2_COMP_MASK <<
+				  (index - 1))));
+			if (bufintr) {
+				xudc_nonctrl_ep_handler(udc, index,
+							intrstatus);
+			}
+		}
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return IRQ_HANDLED;
+}
+
+/**
+ * xudc_probe - The device probe function for driver initialization.
+ * @pdev: pointer to the platform device structure.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int xudc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *res;
+	struct xusb_udc *udc;
+	int irq;
+	int ret;
+	u32 ier;
+	u8 *buff;
+
+	udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
+
+	/* Create a dummy request for GET_STATUS, SET_ADDRESS */
+	udc->req = devm_kzalloc(&pdev->dev, sizeof(struct xusb_req),
+				GFP_KERNEL);
+	if (!udc->req)
+		return -ENOMEM;
+
+	buff = devm_kzalloc(&pdev->dev, STATUSBUFF_SIZE, GFP_KERNEL);
+	if (!buff)
+		return -ENOMEM;
+
+	udc->req->usb_req.buf = buff;
+
+	/* Map the registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	udc->addr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(udc->addr))
+		return PTR_ERR(udc->addr);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+	ret = devm_request_irq(&pdev->dev, irq, xudc_irq, 0,
+			       dev_name(&pdev->dev), udc);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "unable to request irq %d", irq);
+		goto fail;
+	}
+
+	udc->dma_enabled = of_property_read_bool(np, "xlnx,has-builtin-dma");
+
+	/* Setup gadget structure */
+	udc->gadget.ops = &xusb_udc_ops;
+	udc->gadget.max_speed = USB_SPEED_HIGH;
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->gadget.ep0 = &udc->ep[XUSB_EP_NUMBER_ZERO].ep_usb;
+	udc->gadget.name = driver_name;
+
+	udc->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
+	if (IS_ERR(udc->clk)) {
+		if (PTR_ERR(udc->clk) != -ENOENT) {
+			ret = PTR_ERR(udc->clk);
+			goto fail;
+		}
+
+		/*
+		 * Clock framework support is optional, continue on,
+		 * anyways if we don't find a matching clock
+		 */
+		dev_warn(&pdev->dev, "s_axi_aclk clock property is not found\n");
+		udc->clk = NULL;
+	}
+
+	ret = clk_prepare_enable(udc->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable clock.\n");
+		return ret;
+	}
+
+	spin_lock_init(&udc->lock);
+
+	/* Check for IP endianness */
+	udc->write_fn = xudc_write32_be;
+	udc->read_fn = xudc_read32_be;
+	udc->write_fn(udc->addr, XUSB_TESTMODE_OFFSET, USB_TEST_J);
+	if ((udc->read_fn(udc->addr + XUSB_TESTMODE_OFFSET))
+			!= USB_TEST_J) {
+		udc->write_fn = xudc_write32;
+		udc->read_fn = xudc_read32;
+	}
+	udc->write_fn(udc->addr, XUSB_TESTMODE_OFFSET, 0);
+
+	xudc_eps_init(udc);
+
+	/* Set device address to 0.*/
+	udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET, 0);
+
+	ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
+	if (ret)
+		goto err_disable_unprepare_clk;
+
+	udc->dev = &udc->gadget.dev;
+
+	/* Enable the interrupts.*/
+	ier = XUSB_STATUS_GLOBAL_INTR_MASK | XUSB_STATUS_INTR_EVENT_MASK |
+	      XUSB_STATUS_FIFO_BUFF_RDY_MASK | XUSB_STATUS_FIFO_BUFF_FREE_MASK |
+	      XUSB_STATUS_SETUP_PACKET_MASK |
+	      XUSB_STATUS_INTR_BUFF_COMP_ALL_MASK;
+
+	udc->write_fn(udc->addr, XUSB_IER_OFFSET, ier);
+
+	platform_set_drvdata(pdev, udc);
+
+	dev_vdbg(&pdev->dev, "%s at 0x%08X mapped to %p %s\n",
+		 driver_name, (u32)res->start, udc->addr,
+		 udc->dma_enabled ? "with DMA" : "without DMA");
+
+	return 0;
+
+err_disable_unprepare_clk:
+	clk_disable_unprepare(udc->clk);
+fail:
+	dev_err(&pdev->dev, "probe failed, %d\n", ret);
+	return ret;
+}
+
+/**
+ * xudc_remove - Releases the resources allocated during the initialization.
+ * @pdev: pointer to the platform device structure.
+ *
+ * Return: 0 always
+ */
+static int xudc_remove(struct platform_device *pdev)
+{
+	struct xusb_udc *udc = platform_get_drvdata(pdev);
+
+	usb_del_gadget_udc(&udc->gadget);
+	clk_disable_unprepare(udc->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int xudc_suspend(struct device *dev)
+{
+	struct xusb_udc *udc;
+	u32 crtlreg;
+	unsigned long flags;
+
+	udc = dev_get_drvdata(dev);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	crtlreg = udc->read_fn(udc->addr + XUSB_CONTROL_OFFSET);
+	crtlreg &= ~XUSB_CONTROL_USB_READY_MASK;
+
+	udc->write_fn(udc->addr, XUSB_CONTROL_OFFSET, crtlreg);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	if (udc->driver && udc->driver->suspend)
+		udc->driver->suspend(&udc->gadget);
+
+	clk_disable(udc->clk);
+
+	return 0;
+}
+
+static int xudc_resume(struct device *dev)
+{
+	struct xusb_udc *udc;
+	u32 crtlreg;
+	unsigned long flags;
+	int ret;
+
+	udc = dev_get_drvdata(dev);
+
+	ret = clk_enable(udc->clk);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	crtlreg = udc->read_fn(udc->addr + XUSB_CONTROL_OFFSET);
+	crtlreg |= XUSB_CONTROL_USB_READY_MASK;
+
+	udc->write_fn(udc->addr, XUSB_CONTROL_OFFSET, crtlreg);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops xudc_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(xudc_suspend, xudc_resume)
+};
+
+/* Match table for of_platform binding */
+static const struct of_device_id usb_of_match[] = {
+	{ .compatible = "xlnx,usb2-device-4.00.a", },
+	{ /* end of list */ },
+};
+MODULE_DEVICE_TABLE(of, usb_of_match);
+
+static struct platform_driver xudc_driver = {
+	.driver = {
+		.name = driver_name,
+		.of_match_table = usb_of_match,
+		.pm	= &xudc_pm_ops,
+	},
+	.probe = xudc_probe,
+	.remove = xudc_remove,
+};
+
+module_platform_driver(xudc_driver);
+
+MODULE_DESCRIPTION("Xilinx udc driver");
+MODULE_AUTHOR("Xilinx, Inc");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
new file mode 100644
index 000000000..75f6f99f8
--- /dev/null
+++ b/drivers/usb/gadget/usbstring.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: LGPL-2.1+
+/*
+ * Copyright (C) 2003 David Brownell
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/device.h>
+#include <linux/nls.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+
+/**
+ * usb_gadget_get_string - fill out a string descriptor 
+ * @table: of c strings encoded using UTF-8
+ * @id: string id, from low byte of wValue in get string descriptor
+ * @buf: at least 256 bytes, must be 16-bit aligned
+ *
+ * Finds the UTF-8 string matching the ID, and converts it into a
+ * string descriptor in utf16-le.
+ * Returns length of descriptor (always even) or negative errno
+ *
+ * If your driver needs stings in multiple languages, you'll probably
+ * "switch (wIndex) { ... }"  in your ep0 string descriptor logic,
+ * using this routine after choosing which set of UTF-8 strings to use.
+ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with
+ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1
+ * characters (which are also widely used in C strings).
+ */
+int
+usb_gadget_get_string (const struct usb_gadget_strings *table, int id, u8 *buf)
+{
+	struct usb_string	*s;
+	int			len;
+
+	/* descriptor 0 has the language id */
+	if (id == 0) {
+		buf [0] = 4;
+		buf [1] = USB_DT_STRING;
+		buf [2] = (u8) table->language;
+		buf [3] = (u8) (table->language >> 8);
+		return 4;
+	}
+	for (s = table->strings; s && s->s; s++)
+		if (s->id == id)
+			break;
+
+	/* unrecognized: stall. */
+	if (!s || !s->s)
+		return -EINVAL;
+
+	/* string descriptors have length, tag, then UTF16-LE text */
+	len = min((size_t)USB_MAX_STRING_LEN, strlen(s->s));
+	len = utf8s_to_utf16s(s->s, len, UTF16_LITTLE_ENDIAN,
+			(wchar_t *) &buf[2], USB_MAX_STRING_LEN);
+	if (len < 0)
+		return -EINVAL;
+	buf [0] = (len + 1) * 2;
+	buf [1] = USB_DT_STRING;
+	return buf [0];
+}
+EXPORT_SYMBOL_GPL(usb_gadget_get_string);
+
+/**
+ * usb_validate_langid - validate usb language identifiers
+ * @langid: usb language identifier
+ *
+ * Returns true for valid language identifier, otherwise false.
+ */
+bool usb_validate_langid(u16 langid)
+{
+	u16 primary_lang = langid & 0x3ff;	/* bit [9:0] */
+	u16 sub_lang = langid >> 10;		/* bit [15:10] */
+
+	switch (primary_lang) {
+	case 0:
+	case 0x62 ... 0xfe:
+	case 0x100 ... 0x3ff:
+		return false;
+	}
+	if (!sub_lang)
+		return false;
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(usb_validate_langid);
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
new file mode 100644
index 000000000..247568bc1
--- /dev/null
+++ b/drivers/usb/host/Kconfig
@@ -0,0 +1,795 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Host Controller Drivers
+#
+comment "USB Host Controller Drivers"
+
+config USB_C67X00_HCD
+	tristate "Cypress C67x00 HCD support"
+	depends on HAS_IOMEM
+	help
+	  The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
+	  host/peripheral/OTG USB controllers.
+
+	  Enable this option to support this chip in host controller mode.
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called c67x00.
+
+config USB_XHCI_HCD
+	tristate "xHCI HCD (USB 3.0) support"
+	depends on HAS_DMA && HAS_IOMEM
+	help
+	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
+	  "SuperSpeed" host controller hardware.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xhci-hcd.
+
+if USB_XHCI_HCD
+config USB_XHCI_DBGCAP
+	bool "xHCI support for debug capability"
+	depends on TTY
+	help
+	  Say 'Y' to enable the support for the xHCI debug capability. Make
+	  sure that your xHCI host supports the extended debug capability and
+	  you want a TTY serial device based on the xHCI debug capability
+	  before enabling this option. If unsure, say 'N'.
+
+config USB_XHCI_PCI
+	tristate
+	depends on USB_PCI
+	depends on USB_XHCI_PCI_RENESAS || !USB_XHCI_PCI_RENESAS
+	default y
+
+config USB_XHCI_PCI_RENESAS
+	tristate "Support for additional Renesas xHCI controller with firmware"
+	help
+	  Say 'Y' to enable the support for the Renesas xHCI controller with
+	  firmware. Make sure you have the firwmare for the device and
+	  installed on your system for this device to work.
+	  If unsure, say 'N'.
+
+config USB_XHCI_PLATFORM
+	tristate "Generic xHCI driver for a platform device"
+	select USB_XHCI_RCAR if ARCH_RENESAS
+	help
+	  Adds an xHCI host driver for a generic platform device, which
+	  provides a memory space and an irq.
+	  It is also a prerequisite for platform specific drivers that
+	  implement some extra quirks.
+
+	  If unsure, say N.
+
+config USB_XHCI_HISTB
+	tristate "xHCI support for HiSilicon STB SoCs"
+	depends on USB_XHCI_PLATFORM && (ARCH_HISI || COMPILE_TEST)
+	help
+	  Say 'Y' to enable the support for the xHCI host controller
+	  found in HiSilicon STB SoCs.
+
+config USB_XHCI_MTK
+	tristate "xHCI support for MediaTek SoCs"
+	select MFD_SYSCON
+	depends on (MIPS && SOC_MT7621) || ARCH_MEDIATEK || COMPILE_TEST
+	help
+	  Say 'Y' to enable the support for the xHCI host controller
+	  found in MediaTek SoCs.
+	  If unsure, say N.
+
+config USB_XHCI_MVEBU
+	tristate "xHCI support for Marvell Armada 375/38x/37xx"
+	select USB_XHCI_PLATFORM
+	depends on HAS_IOMEM
+	depends on ARCH_MVEBU || COMPILE_TEST
+	help
+	  Say 'Y' to enable the support for the xHCI host controller
+	  found in Marvell Armada 375/38x/37xx ARM SOCs.
+
+config USB_XHCI_RCAR
+	tristate "xHCI support for Renesas R-Car SoCs"
+	depends on USB_XHCI_PLATFORM
+	depends on ARCH_RENESAS || COMPILE_TEST
+	help
+	  Say 'Y' to enable the support for the xHCI host controller
+	  found in Renesas R-Car ARM SoCs.
+
+config USB_XHCI_TEGRA
+	tristate "xHCI support for NVIDIA Tegra SoCs"
+	depends on PHY_TEGRA_XUSB
+	depends on RESET_CONTROLLER
+	select FW_LOADER
+	help
+	  Say 'Y' to enable the support for the xHCI host controller
+	  found in NVIDIA Tegra124 and later SoCs.
+
+endif # USB_XHCI_HCD
+
+config USB_EHCI_BRCMSTB
+       tristate
+
+config USB_BRCMSTB
+	tristate "Broadcom STB USB support"
+	depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST
+	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
+	select USB_EHCI_BRCMSTB if USB_EHCI_HCD
+	select USB_XHCI_PLATFORM if USB_XHCI_HCD
+	help
+	  Enables support for XHCI, EHCI and OHCI host controllers
+	  found in Broadcom STB SoC's.
+
+	  To compile these drivers as modules, choose M here: the
+	  modules will be called ohci-platform.ko, ehci-brcm.ko and
+	  xhci-plat-hcd.ko
+
+	  Disabling this will keep the controllers and corresponding
+	  PHYs powered down.
+
+config USB_EHCI_HCD
+	tristate "EHCI HCD (USB 2.0) support"
+	depends on HAS_DMA && HAS_IOMEM
+	help
+	  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
+	  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
+	  If your USB host controller supports USB 2.0, you will likely want to
+	  configure this Host Controller Driver.
+
+	  EHCI controllers are packaged with "companion" host controllers (OHCI
+	  or UHCI) to handle USB 1.1 devices connected to root hub ports.  Ports
+	  will connect to EHCI if the device is high speed, otherwise they
+	  connect to a companion controller.  If you configure EHCI, you should
+	  probably configure the OHCI (for NEC and some other vendors) USB Host
+	  Controller Driver or UHCI (for Via motherboards) Host Controller
+	  Driver too.
+
+	  You may want to read <file:Documentation/usb/ehci.rst>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ehci-hcd.
+
+config USB_EHCI_ROOT_HUB_TT
+	bool "Root Hub Transaction Translators"
+	depends on USB_EHCI_HCD
+	help
+	  Some EHCI chips have vendor-specific extensions to integrate
+	  transaction translators, so that no OHCI or UHCI companion
+	  controller is needed.  It's safe to say "y" even if your
+	  controller doesn't support this feature.
+
+	  This supports the EHCI implementation that's originally
+	  from ARC, and has since changed hands a few times.
+
+config USB_EHCI_TT_NEWSCHED
+	bool "Improved Transaction Translator scheduling"
+	depends on USB_EHCI_HCD
+	default y
+	help
+	  This changes the periodic scheduling code to fill more of the low
+	  and full speed bandwidth available from the Transaction Translator
+	  (TT) in USB 2.0 hubs.  Without this, only one transfer will be
+	  issued in each microframe, significantly reducing the number of
+	  periodic low/fullspeed transfers possible.
+
+	  If you have multiple periodic low/fullspeed devices connected to a
+	  highspeed USB hub which is connected to a highspeed USB Host
+	  Controller, and some of those devices will not work correctly
+	  (possibly due to "ENOSPC" or "-28" errors), say Y.  Conversely, if
+	  you have only one such device and it doesn't work, you could try
+	  saying N.
+
+	  If unsure, say Y.
+
+if USB_EHCI_HCD
+
+config USB_EHCI_PCI
+	tristate
+	depends on USB_PCI
+	default y
+
+config XPS_USB_HCD_XILINX
+	bool "Use Xilinx usb host EHCI controller core"
+	depends on (PPC32 || MICROBLAZE)
+	select USB_EHCI_BIG_ENDIAN_DESC
+	select USB_EHCI_BIG_ENDIAN_MMIO
+	help
+		Xilinx xps USB host controller core is EHCI compliant and has
+		transaction translator built-in. It can be configured to either
+		support both high speed and full speed devices, or high speed
+		devices only.
+
+config USB_EHCI_FSL
+	tristate "Support for Freescale on-chip EHCI USB controller"
+	select USB_EHCI_ROOT_HUB_TT
+	help
+	  Variation of ARC USB block used in some Freescale chips.
+
+config USB_EHCI_HCD_NPCM7XX
+	tristate "Support for Nuvoton NPCM on-chip EHCI USB controller"
+	depends on (USB_EHCI_HCD && ARCH_NPCM) || COMPILE_TEST
+	default y if (USB_EHCI_HCD && ARCH_NPCM)
+	help
+	  Enables support for the on-chip EHCI controller on
+	  Nuvoton NPCM chips.
+
+config USB_EHCI_HCD_OMAP
+	tristate "EHCI support for OMAP3 and later chips"
+	depends on ARCH_OMAP || COMPILE_TEST
+	depends on NOP_USB_XCEIV
+	default y
+	help
+	  Enables support for the on-chip EHCI controller on
+	  OMAP3 and later chips.
+
+config USB_EHCI_HCD_ORION
+	tristate  "Support for Marvell EBU on-chip EHCI USB controller"
+	depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU || COMPILE_TEST)
+	default y if (PLAT_ORION || ARCH_MVEBU)
+	help
+	  Enables support for the on-chip EHCI controller on Marvell's
+	  embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
+	  Armada 370.  This is different from the EHCI implementation
+	  on Marvell's mobile PXA and MMP SoC, see "EHCI support for
+	  Marvell PXA/MMP USB controller" for those.
+
+config USB_EHCI_HCD_SPEAR
+	tristate "Support for ST SPEAr on-chip EHCI USB controller"
+	depends on USB_EHCI_HCD && (PLAT_SPEAR || COMPILE_TEST)
+	default y if PLAT_SPEAR
+	help
+	  Enables support for the on-chip EHCI controller on
+	  ST SPEAr chips.
+
+config USB_EHCI_HCD_STI
+	tristate "Support for ST STiHxxx on-chip EHCI USB controller"
+	depends on (ARCH_STI || COMPILE_TEST) && OF
+	select GENERIC_PHY
+	select USB_EHCI_HCD_PLATFORM
+	help
+	  Enable support for the on-chip EHCI controller found on
+	  STMicroelectronics consumer electronics SoC's.
+
+config USB_EHCI_HCD_AT91
+	tristate  "Support for Atmel on-chip EHCI USB controller"
+	depends on USB_EHCI_HCD && (ARCH_AT91 || COMPILE_TEST)
+	default y if ARCH_AT91
+	help
+	  Enables support for the on-chip EHCI controller on
+	  Atmel chips.
+
+config USB_EHCI_TEGRA
+	tristate "NVIDIA Tegra HCD support"
+	depends on ARCH_TEGRA
+	select USB_CHIPIDEA
+	select USB_CHIPIDEA_HOST
+	select USB_CHIPIDEA_TEGRA
+	select USB_GADGET
+	help
+	  This option is deprecated now and the driver was removed, use
+	  USB_CHIPIDEA_TEGRA instead.
+
+	  Enable support for the internal USB Host Controllers
+	  found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
+
+config USB_EHCI_HCD_PPC_OF
+	bool "EHCI support for PPC USB controller on OF platform bus"
+	depends on PPC
+	default y
+	help
+	  Enables support for the USB controller present on the PowerPC
+	  OpenFirmware platform bus.
+
+config USB_EHCI_SH
+	bool "EHCI support for SuperH USB controller"
+	depends on SUPERH || COMPILE_TEST
+	help
+	  Enables support for the on-chip EHCI controller on the SuperH.
+	  If you use the PCI EHCI controller, this option is not necessary.
+
+config USB_EHCI_EXYNOS
+	tristate "EHCI support for Samsung S5P/Exynos SoC Series"
+	depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
+	help
+	  Enable support for the Samsung S5Pv210 and Exynos SOC's on-chip EHCI
+	  controller.
+
+config USB_EHCI_MV
+	tristate "EHCI support for Marvell PXA/MMP USB controller"
+	depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
+	select USB_EHCI_ROOT_HUB_TT
+	help
+	  Enables support for Marvell (including PXA and MMP series) on-chip
+	  USB SPH and OTG controller. SPH is a single port host, and it can
+	  only be EHCI host. OTG is controller that can switch to host mode.
+	  Note that this driver will not work on Marvell's other EHCI
+	  controller used by the EBU-type SoCs including Orion, Kirkwood,
+	  Dova, Armada 370 and Armada XP. See "Support for Marvell EBU
+	  on-chip EHCI USB controller" for those.
+
+config USB_OCTEON_HCD
+	tristate "Cavium Networks Octeon USB support"
+	depends on CAVIUM_OCTEON_SOC && USB
+	help
+	  This driver supports USB host controller on some Cavium
+	  Networks' products in the Octeon family.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called octeon-hcd.
+
+config USB_CNS3XXX_EHCI
+	bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
+	depends on ARCH_CNS3XXX || COMPILE_TEST
+	select USB_EHCI_HCD_PLATFORM
+	help
+	  This option is deprecated now and the driver was removed, use
+	  USB_EHCI_HCD_PLATFORM instead.
+
+	  Enable support for the CNS3XXX SOC's on-chip EHCI controller.
+	  It is needed for high-speed (480Mbit/sec) USB 2.0 device
+	  support.
+
+config USB_EHCI_HCD_PLATFORM
+	tristate "Generic EHCI driver for a platform device"
+	help
+	  Adds an EHCI host driver for a generic platform device, which
+	  provides a memory space and an irq.
+
+	  If unsure, say N.
+
+config USB_OCTEON_EHCI
+	bool "Octeon on-chip EHCI support (DEPRECATED)"
+	depends on CAVIUM_OCTEON_SOC
+	select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
+	select USB_EHCI_HCD_PLATFORM
+	help
+	  This option is deprecated now and the driver was removed, use
+	  USB_EHCI_HCD_PLATFORM instead.
+
+	  Enable support for the Octeon II SOC's on-chip EHCI
+	  controller.  It is needed for high-speed (480Mbit/sec)
+	  USB 2.0 device support.  All CN6XXX based chips with USB are
+	  supported.
+
+endif # USB_EHCI_HCD
+
+config USB_OXU210HP_HCD
+	tristate "OXU210HP HCD support"
+	depends on HAS_IOMEM
+	help
+	  The OXU210HP is an USB host/OTG/device controller. Enable this
+	  option if your board has this chip. If unsure, say N.
+
+	  This driver does not support isochronous transfers and doesn't
+	  implement OTG nor USB device controllers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called oxu210hp-hcd.
+
+config USB_ISP116X_HCD
+	tristate "ISP116X HCD support"
+	depends on HAS_IOMEM
+	help
+	  The ISP1160 and ISP1161 chips are USB host controllers. Enable this
+	  option if your board has this chip. If unsure, say N.
+
+	  This driver does not support isochronous transfers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called isp116x-hcd.
+
+config USB_ISP1362_HCD
+	tristate "ISP1362 HCD support"
+	depends on HAS_IOMEM
+	depends on COMPILE_TEST # nothing uses this
+	help
+	  Supports the Philips ISP1362 chip as a host controller
+
+	  This driver does not support isochronous transfers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called isp1362-hcd.
+
+config USB_FOTG210_HCD
+	tristate "FOTG210 HCD support"
+	depends on USB && HAS_DMA && HAS_IOMEM
+	help
+	  Faraday FOTG210 is an OTG controller which can be configured as
+	  an USB2.0 host. It is designed to meet USB2.0 EHCI specification
+	  with minor modification.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called fotg210-hcd.
+
+config USB_MAX3421_HCD
+	tristate "MAX3421 HCD (USB-over-SPI) support"
+	depends on USB && SPI
+	help
+	  The Maxim MAX3421E chip supports standard USB 2.0-compliant
+	  full-speed devices either in host or peripheral mode.  This
+	  driver supports the host-mode of the MAX3421E only.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called max3421-hcd.
+
+config USB_OHCI_HCD
+	tristate "OHCI HCD (USB 1.1) support"
+	depends on HAS_DMA && HAS_IOMEM
+	help
+	  The Open Host Controller Interface (OHCI) is a standard for accessing
+	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
+	  UHCI specification.  If your USB host controller follows the OHCI spec,
+	  say Y.  On most non-x86 systems, and on x86 hardware that's not using a
+	  USB controller from Intel or VIA, this is appropriate.  If your host
+	  controller doesn't use PCI, this is probably appropriate.  For a PCI
+	  based system where you're not sure, the "lspci -v" entry will list the
+	  right "prog-if" for your USB controller(s):  EHCI, OHCI, or UHCI.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ohci-hcd.
+
+if USB_OHCI_HCD
+
+config USB_OHCI_HCD_OMAP1
+	tristate "OHCI support for OMAP1/2 chips"
+	depends on ARCH_OMAP1
+	depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
+	default y
+	help
+	  Enables support for the OHCI controller on OMAP1/2 chips.
+
+config USB_OHCI_HCD_SPEAR
+	tristate "Support for ST SPEAr on-chip OHCI USB controller"
+	depends on USB_OHCI_HCD && (PLAT_SPEAR || COMPILE_TEST)
+	default y if PLAT_SPEAR
+	help
+	  Enables support for the on-chip OHCI controller on
+	  ST SPEAr chips.
+
+config USB_OHCI_HCD_STI
+	tristate "Support for ST STiHxxx on-chip OHCI USB controller"
+	depends on (ARCH_STI || COMPILE_TEST) && OF
+	select GENERIC_PHY
+	select USB_OHCI_HCD_PLATFORM
+	help
+	  Enable support for the on-chip OHCI controller found on
+	  STMicroelectronics consumer electronics SoC's.
+
+config USB_OHCI_HCD_S3C2410
+	tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
+	depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX || COMPILE_TEST)
+	default y if (ARCH_S3C24XX || ARCH_S3C64XX)
+	help
+	  Enables support for the on-chip OHCI controller on
+	  S3C24xx/S3C64xx chips.
+
+config USB_OHCI_HCD_LPC32XX
+	tristate "Support for LPC on-chip OHCI USB controller"
+	depends on USB_OHCI_HCD
+	depends on ARCH_LPC32XX || COMPILE_TEST
+	depends on USB_ISP1301
+	default y
+	help
+	  Enables support for the on-chip OHCI controller on
+	  NXP chips.
+
+config USB_OHCI_HCD_PXA27X
+	tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
+	depends on USB_OHCI_HCD && (PXA27x || PXA3xx)
+	default y
+	help
+	  Enables support for the on-chip OHCI controller on
+	  PXA27x/PXA3xx chips.
+
+config USB_OHCI_HCD_AT91
+	tristate "Support for Atmel on-chip OHCI USB controller"
+	depends on USB_OHCI_HCD && (ARCH_AT91 || COMPILE_TEST) && OF
+	default y if ARCH_AT91
+	help
+	  Enables support for the on-chip OHCI controller on
+	  Atmel chips.
+
+config USB_OHCI_HCD_OMAP3
+	tristate "OHCI support for OMAP3 and later chips"
+	depends on ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST
+	select USB_OHCI_HCD_PLATFORM
+	default y if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
+	help
+	  This option is deprecated now and the driver was removed, use
+	  USB_OHCI_HCD_PLATFORM instead.
+
+	  Enables support for the on-chip OHCI controller on
+	  OMAP3 and later chips.
+
+config USB_OHCI_HCD_DAVINCI
+	tristate "OHCI support for TI DaVinci DA8xx"
+	depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
+	depends on USB_OHCI_HCD
+	select PHY_DA8XX_USB
+	default y if ARCH_DAVINCI_DA8XX
+	help
+	  Enables support for the DaVinci DA8xx integrated OHCI
+	  controller. This driver cannot currently be a loadable
+	  module because it lacks a proper PHY abstraction.
+
+config USB_OHCI_HCD_PPC_OF_BE
+	bool "OHCI support for OF platform bus (big endian)"
+	depends on PPC
+	select USB_OHCI_BIG_ENDIAN_DESC
+	select USB_OHCI_BIG_ENDIAN_MMIO
+	help
+	  Enables support for big-endian USB controllers present on the
+	  OpenFirmware platform bus.
+
+config USB_OHCI_HCD_PPC_OF_LE
+	bool "OHCI support for OF platform bus (little endian)"
+	depends on PPC
+	select USB_OHCI_LITTLE_ENDIAN
+	help
+	  Enables support for little-endian USB controllers present on the
+	  OpenFirmware platform bus.
+
+config USB_OHCI_HCD_PPC_OF
+	bool
+	depends on PPC
+	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
+
+config USB_OHCI_HCD_PCI
+	tristate "OHCI support for PCI-bus USB controllers"
+	depends on USB_PCI
+	default y
+	select USB_OHCI_LITTLE_ENDIAN
+	help
+	  Enables support for PCI-bus plug-in USB controller cards.
+	  If unsure, say Y.
+
+config USB_OHCI_HCD_SSB
+	bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
+	depends on (SSB = y || SSB = USB_OHCI_HCD)
+	select USB_HCD_SSB
+	select USB_OHCI_HCD_PLATFORM
+	help
+	  This option is deprecated now and the driver was removed, use
+	  USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
+
+	  Support for the Sonics Silicon Backplane (SSB) attached
+	  Broadcom USB OHCI core.
+
+	  This device is present in some embedded devices with
+	  Broadcom based SSB bus.
+
+	  If unsure, say N.
+
+config USB_OHCI_SH
+	bool "OHCI support for SuperH USB controller (DEPRECATED)"
+	depends on SUPERH || COMPILE_TEST
+	select USB_OHCI_HCD_PLATFORM
+	help
+	  This option is deprecated now and the driver was removed, use
+	  USB_OHCI_HCD_PLATFORM instead.
+
+	  Enables support for the on-chip OHCI controller on the SuperH.
+	  If you use the PCI OHCI controller, this option is not necessary.
+
+config USB_OHCI_EXYNOS
+	tristate "OHCI support for Samsung S5P/Exynos SoC Series"
+	depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
+	help
+	  Enable support for the Samsung S5Pv210 and Exynos SOC's on-chip OHCI
+	  controller.
+
+config USB_CNS3XXX_OHCI
+	bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
+	depends on ARCH_CNS3XXX || COMPILE_TEST
+	select USB_OHCI_HCD_PLATFORM
+	help
+	  This option is deprecated now and the driver was removed, use
+	  USB_OHCI_HCD_PLATFORM instead.
+
+	  Enable support for the CNS3XXX SOC's on-chip OHCI controller.
+	  It is needed for low-speed USB 1.0 device support.
+
+config USB_OHCI_HCD_PLATFORM
+	tristate "Generic OHCI driver for a platform device"
+	help
+	  Adds an OHCI host driver for a generic platform device, which
+	  provides a memory space and an irq.
+
+	  If unsure, say N.
+
+config USB_OCTEON_OHCI
+	bool "Octeon on-chip OHCI support (DEPRECATED)"
+	depends on CAVIUM_OCTEON_SOC
+	default USB_OCTEON_EHCI
+	select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
+	select USB_OHCI_LITTLE_ENDIAN
+	select USB_OHCI_HCD_PLATFORM
+	help
+	  This option is deprecated now and the driver was removed, use
+	  USB_OHCI_HCD_PLATFORM instead.
+
+	  Enable support for the Octeon II SOC's on-chip OHCI
+	  controller.  It is needed for low-speed USB 1.0 device
+	  support.  All CN6XXX based chips with USB are supported.
+
+endif # USB_OHCI_HCD
+
+config USB_UHCI_HCD
+	tristate "UHCI HCD (most Intel and VIA) support"
+	depends on USB_PCI || USB_UHCI_SUPPORT_NON_PCI_HC
+	help
+	  The Universal Host Controller Interface is a standard by Intel for
+	  accessing the USB hardware in the PC (which is also called the USB
+	  host controller). If your USB host controller conforms to this
+	  standard, you may want to say Y, but see below. All recent boards
+	  with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
+	  i810, i820) conform to this standard. Also all VIA PCI chipsets
+	  (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
+	  133) and LEON/GRLIB SoCs with the GRUSBHC controller.
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called uhci-hcd.
+
+config USB_UHCI_SUPPORT_NON_PCI_HC
+	bool
+	default y if (SPARC_LEON || USB_UHCI_PLATFORM)
+
+config USB_UHCI_PLATFORM
+	bool
+	default y if (ARCH_VT8500 || ARCH_ASPEED)
+
+config USB_UHCI_ASPEED
+	bool
+	default y if ARCH_ASPEED
+
+config USB_FHCI_HCD
+	tristate "Freescale QE USB Host Controller support"
+	depends on OF_GPIO && QE_GPIO && QUICC_ENGINE
+	select FSL_GTM
+	select QE_USB
+	help
+	  This driver enables support for Freescale QE USB Host Controller
+	  (as found on MPC8360 and MPC8323 processors), the driver supports
+	  Full and Low Speed USB.
+
+config FHCI_DEBUG
+	bool "Freescale QE USB Host Controller debug support"
+	depends on USB_FHCI_HCD && DEBUG_FS
+	help
+	  Say "y" to see some FHCI debug information and statistics
+	  through debugfs.
+
+config USB_U132_HCD
+	tristate "Elan U132 Adapter Host Controller"
+	depends on USB_FTDI_ELAN
+	help
+	  The U132 adapter is a USB to CardBus adapter specifically designed
+	  for PC cards that contain an OHCI host controller. Typical PC cards
+	  are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132
+	  adapter will *NOT* work with PC cards that do not contain an OHCI
+	  controller.
+
+	  For those PC cards that contain multiple OHCI controllers only the
+	  first one is used.
+
+	  The driver consists of two modules, the "ftdi-elan" module is a
+	  USB client driver that interfaces to the FTDI chip within ELAN's
+	  USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
+	  controller driver that talks to the OHCI controller within the
+	  CardBus cards that are inserted in the U132 adapter.
+
+	  This driver has been tested with a CardBus OHCI USB adapter, and
+	  worked with a USB PEN Drive inserted into the first USB port of
+	  the PCCARD. A rather pointless thing to do, but useful for testing.
+
+	  It is safe to say M here.
+
+	  See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php>
+
+config USB_SL811_HCD
+	tristate "SL811HS HCD support"
+	depends on HAS_IOMEM
+	help
+	  The SL811HS is a single-port USB controller that supports either
+	  host side or peripheral side roles.  Enable this option if your
+	  board has this chip, and you want to use it as a host controller. 
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sl811-hcd.
+
+config USB_SL811_HCD_ISO
+	bool "partial ISO support"
+	depends on USB_SL811_HCD
+	help
+	  The driver doesn't support iso_frame_desc (yet), but for some simple
+	  devices that just queue one ISO frame per URB, then ISO transfers
+	  "should" work using the normal urb status fields.
+
+	  If unsure, say N.
+
+config USB_SL811_CS
+	tristate "CF/PCMCIA support for SL811HS HCD"
+	depends on USB_SL811_HCD && PCMCIA
+	help
+	  Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
+	  REX-CFU1U CF card (often used with PDAs).  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called "sl811_cs".
+
+config USB_R8A66597_HCD
+	tristate "R8A66597 HCD support"
+	depends on HAS_IOMEM
+	help
+	  The R8A66597 is a USB 2.0 host and peripheral controller.
+
+	  Enable this option if your board has this chip, and you want
+	  to use it as a host controller.  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called r8a66597-hcd.
+
+config USB_RENESAS_USBHS_HCD
+	tristate "Renesas USBHS HCD support"
+	depends on USB_RENESAS_USBHS
+	help
+	  The Renesas USBHS is a USB 2.0 host and peripheral controller.
+
+	  Enable this option if your board has this chip, and you want
+	  to use it as a host controller.  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called renesas-usbhs.
+
+config USB_HCD_BCMA
+	tristate "BCMA usb host driver"
+	depends on BCMA
+	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
+	select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
+	help
+	  Enable support for the EHCI and OCHI host controller on an bcma bus.
+	  It converts the bcma driver into two platform device drivers
+	  for ehci and ohci.
+
+	  If unsure, say N.
+
+config USB_HCD_SSB
+	tristate "SSB usb host driver"
+	depends on SSB
+	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
+	select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
+	help
+	  Enable support for the EHCI and OCHI host controller on an bcma bus.
+	  It converts the bcma driver into two platform device drivers
+	  for ehci and ohci.
+
+	  If unsure, say N.
+
+config USB_HCD_TEST_MODE
+	bool "HCD test mode support"
+	help
+	  Say 'Y' to enable additional software test modes that may be
+	  supported by the host controller drivers.
+
+	  One such test mode is the Embedded High-speed Host Electrical Test
+	  (EHSET) for EHCI host controller hardware, specifically the "Single
+	  Step Set Feature" test.  Typically this will be enabled for On-the-Go
+	  or embedded hosts that need to undergo USB-IF compliance testing with
+	  the aid of special testing hardware.  In the future, this may expand
+	  to include other tests that require support from a HCD driver.
+
+	  This option is of interest only to developers who need to validate
+	  their USB hardware designs.  It is not needed for normal use.  If
+	  unsure, say N.
+
+config USB_XEN_HCD
+	tristate "Xen usb virtual host driver"
+	depends on XEN
+	select XEN_XENBUS_FRONTEND
+	help
+	  The Xen usb virtual host driver serves as a frontend driver enabling
+	  a Xen guest system to access USB Devices passed through to the guest
+	  by the Xen host (usually Dom0).
+	  Only needed if the kernel is running in a Xen guest and generic
+	  access to a USB device is needed.
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
new file mode 100644
index 000000000..2c8a61be7
--- /dev/null
+++ b/drivers/usb/host/Makefile
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for USB Host Controller Drivers
+#
+
+# tell define_trace.h where to find the xhci trace header
+CFLAGS_xhci-trace.o := -I$(src)
+
+fhci-y := fhci-hcd.o fhci-hub.o fhci-q.o
+fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o
+
+fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o
+
+xhci-hcd-y := xhci.o xhci-mem.o xhci-ext-caps.o
+xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
+xhci-hcd-y += xhci-trace.o
+
+ifneq ($(CONFIG_USB_XHCI_DBGCAP), )
+	xhci-hcd-y += xhci-dbgcap.o xhci-dbgtty.o
+endif
+
+xhci-mtk-hcd-y := xhci-mtk.o xhci-mtk-sch.o
+
+xhci-plat-hcd-y := xhci-plat.o
+ifneq ($(CONFIG_USB_XHCI_MVEBU), )
+	xhci-plat-hcd-y		+= xhci-mvebu.o
+endif
+ifneq ($(CONFIG_USB_XHCI_RCAR), )
+	xhci-plat-hcd-y		+= xhci-rcar.o
+endif
+
+ifneq ($(CONFIG_DEBUG_FS),)
+	xhci-hcd-y		+= xhci-debugfs.o
+endif
+
+obj-$(CONFIG_USB_PCI)	+= pci-quirks.o
+
+obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
+obj-$(CONFIG_USB_EHCI_PCI)	+= ehci-pci.o
+obj-$(CONFIG_USB_EHCI_HCD_PLATFORM)	+= ehci-platform.o
+obj-$(CONFIG_USB_EHCI_HCD_NPCM7XX)	+= ehci-npcm7xx.o
+obj-$(CONFIG_USB_EHCI_HCD_OMAP)	+= ehci-omap.o
+obj-$(CONFIG_USB_EHCI_HCD_ORION)	+= ehci-orion.o
+obj-$(CONFIG_USB_EHCI_HCD_SPEAR)	+= ehci-spear.o
+obj-$(CONFIG_USB_EHCI_HCD_STI)	+= ehci-st.o
+obj-$(CONFIG_USB_EHCI_EXYNOS)	+= ehci-exynos.o
+obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
+obj-$(CONFIG_USB_EHCI_BRCMSTB)	+= ehci-brcm.o
+
+obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
+obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
+obj-$(CONFIG_USB_ISP1362_HCD)	+= isp1362-hcd.o
+
+obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
+obj-$(CONFIG_USB_OHCI_HCD_PCI)	+= ohci-pci.o
+obj-$(CONFIG_USB_OHCI_HCD_PLATFORM)	+= ohci-platform.o
+obj-$(CONFIG_USB_OHCI_EXYNOS)	+= ohci-exynos.o
+obj-$(CONFIG_USB_OHCI_HCD_OMAP1)	+= ohci-omap.o
+obj-$(CONFIG_USB_OHCI_HCD_SPEAR)	+= ohci-spear.o
+obj-$(CONFIG_USB_OHCI_HCD_STI)	+= ohci-st.o
+obj-$(CONFIG_USB_OHCI_HCD_AT91)	+= ohci-at91.o
+obj-$(CONFIG_USB_OHCI_HCD_S3C2410)	+= ohci-s3c2410.o
+obj-$(CONFIG_USB_OHCI_HCD_LPC32XX)	+= ohci-nxp.o
+obj-$(CONFIG_USB_OHCI_HCD_PXA27X)	+= ohci-pxa27x.o
+obj-$(CONFIG_USB_OHCI_HCD_DAVINCI)	+= ohci-da8xx.o
+obj-$(CONFIG_USB_OCTEON_HCD)	+= octeon-hcd.o
+
+obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
+obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o
+obj-$(CONFIG_USB_XHCI_HCD)	+= xhci-hcd.o
+obj-$(CONFIG_USB_XHCI_PCI)	+= xhci-pci.o
+obj-$(CONFIG_USB_XHCI_PCI_RENESAS)	+= xhci-pci-renesas.o
+obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
+obj-$(CONFIG_USB_XHCI_HISTB)	+= xhci-histb.o
+obj-$(CONFIG_USB_XHCI_MTK)	+= xhci-mtk-hcd.o
+obj-$(CONFIG_USB_XHCI_TEGRA)	+= xhci-tegra.o
+obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
+obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
+obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
+obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o
+obj-$(CONFIG_USB_FSL_USB2)	+= fsl-mph-dr-of.o
+obj-$(CONFIG_USB_EHCI_FSL)	+= fsl-mph-dr-of.o
+obj-$(CONFIG_USB_EHCI_FSL)	+= ehci-fsl.o
+obj-$(CONFIG_USB_EHCI_MV)	+= ehci-mv.o
+obj-$(CONFIG_USB_HCD_BCMA)	+= bcma-hcd.o
+obj-$(CONFIG_USB_HCD_SSB)	+= ssb-hcd.o
+obj-$(CONFIG_USB_FOTG210_HCD)	+= fotg210-hcd.o
+obj-$(CONFIG_USB_MAX3421_HCD)	+= max3421-hcd.o
+obj-$(CONFIG_USB_XEN_HCD)	+= xen-hcd.o
diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
new file mode 100644
index 000000000..7558cc4d9
--- /dev/null
+++ b/drivers/usb/host/bcma-hcd.c
@@ -0,0 +1,500 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Broadcom specific Advanced Microcontroller Bus
+ * Broadcom USB-core driver (BCMA bus glue)
+ *
+ * Copyright 2011-2015 Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright 2015 Felix Fietkau <nbd@openwrt.org>
+ *
+ * Based on ssb-ohci driver
+ * Copyright 2007 Michael Buesch <m@bues.ch>
+ *
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ *
+ * Derived from the USBcore related parts of Broadcom-SB
+ * Copyright 2005-2011 Broadcom Corporation
+ */
+#include <linux/bcma/bcma.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+
+MODULE_AUTHOR("Hauke Mehrtens");
+MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
+MODULE_LICENSE("GPL");
+
+/* See BCMA_CLKCTLST_EXTRESREQ and BCMA_CLKCTLST_EXTRESST */
+#define USB_BCMA_CLKCTLST_USB_CLK_REQ			0x00000100
+
+struct bcma_hcd_device {
+	struct bcma_device *core;
+	struct platform_device *ehci_dev;
+	struct platform_device *ohci_dev;
+	struct gpio_desc *gpio_desc;
+};
+
+/* Wait for bitmask in a register to get set or cleared.
+ * timeout is in units of ten-microseconds.
+ */
+static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
+			  int timeout)
+{
+	int i;
+	u32 val;
+
+	for (i = 0; i < timeout; i++) {
+		val = bcma_read32(dev, reg);
+		if ((val & bitmask) == bitmask)
+			return 0;
+		udelay(10);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static void bcma_hcd_4716wa(struct bcma_device *dev)
+{
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+	/* Work around for 4716 failures. */
+	if (dev->bus->chipinfo.id == 0x4716) {
+		u32 tmp;
+
+		tmp = bcma_cpu_clock(&dev->bus->drv_mips);
+		if (tmp >= 480000000)
+			tmp = 0x1846b; /* set CDR to 0x11(fast) */
+		else if (tmp == 453000000)
+			tmp = 0x1046b; /* set CDR to 0x10(slow) */
+		else
+			tmp = 0;
+
+		/* Change Shim mdio control reg to fix host not acking at
+		 * high frequencies
+		 */
+		if (tmp) {
+			bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
+			udelay(500);
+
+			bcma_write32(dev, 0x524, tmp);
+			udelay(500);
+			bcma_write32(dev, 0x524, 0x4ab);
+			udelay(500);
+			bcma_read32(dev, 0x528);
+			bcma_write32(dev, 0x528, 0x80000000);
+		}
+	}
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
+}
+
+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
+static void bcma_hcd_init_chip_mips(struct bcma_device *dev)
+{
+	u32 tmp;
+
+	/*
+	 * USB 2.0 special considerations:
+	 *
+	 * 1. Since the core supports both OHCI and EHCI functions, it must
+	 *    only be reset once.
+	 *
+	 * 2. In addition to the standard SI reset sequence, the Host Control
+	 *    Register must be programmed to bring the USB core and various
+	 *    phy components out of reset.
+	 */
+	if (!bcma_core_is_enabled(dev)) {
+		bcma_core_enable(dev, 0);
+		mdelay(10);
+		if (dev->id.rev >= 5) {
+			/* Enable Misc PLL */
+			tmp = bcma_read32(dev, 0x1e0);
+			tmp |= 0x100;
+			bcma_write32(dev, 0x1e0, tmp);
+			if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100))
+				printk(KERN_EMERG "Failed to enable misc PPL!\n");
+
+			/* Take out of resets */
+			bcma_write32(dev, 0x200, 0x4ff);
+			udelay(25);
+			bcma_write32(dev, 0x200, 0x6ff);
+			udelay(25);
+
+			/* Make sure digital and AFE are locked in USB PHY */
+			bcma_write32(dev, 0x524, 0x6b);
+			udelay(50);
+			tmp = bcma_read32(dev, 0x524);
+			udelay(50);
+			bcma_write32(dev, 0x524, 0xab);
+			udelay(50);
+			tmp = bcma_read32(dev, 0x524);
+			udelay(50);
+			bcma_write32(dev, 0x524, 0x2b);
+			udelay(50);
+			tmp = bcma_read32(dev, 0x524);
+			udelay(50);
+			bcma_write32(dev, 0x524, 0x10ab);
+			udelay(50);
+			tmp = bcma_read32(dev, 0x524);
+
+			if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) {
+				tmp = bcma_read32(dev, 0x528);
+				printk(KERN_EMERG
+				       "USB20H mdio_rddata 0x%08x\n", tmp);
+			}
+			bcma_write32(dev, 0x528, 0x80000000);
+			tmp = bcma_read32(dev, 0x314);
+			udelay(265);
+			bcma_write32(dev, 0x200, 0x7ff);
+			udelay(10);
+
+			/* Take USB and HSIC out of non-driving modes */
+			bcma_write32(dev, 0x510, 0);
+		} else {
+			bcma_write32(dev, 0x200, 0x7ff);
+
+			udelay(1);
+		}
+
+		bcma_hcd_4716wa(dev);
+	}
+}
+
+/*
+ * bcma_hcd_usb20_old_arm_init - Initialize old USB 2.0 controller on ARM
+ *
+ * Old USB 2.0 core is identified as BCMA_CORE_USB20_HOST and was introduced
+ * long before Northstar devices. It seems some cheaper chipsets like BCM53573
+ * still use it.
+ * Initialization of this old core differs between MIPS and ARM.
+ */
+static int bcma_hcd_usb20_old_arm_init(struct bcma_hcd_device *usb_dev)
+{
+	struct bcma_device *core = usb_dev->core;
+	struct device *dev = &core->dev;
+	struct bcma_device *pmu_core;
+
+	usleep_range(10000, 20000);
+	if (core->id.rev < 5)
+		return 0;
+
+	pmu_core = bcma_find_core(core->bus, BCMA_CORE_PMU);
+	if (!pmu_core) {
+		dev_err(dev, "Could not find PMU core\n");
+		return -ENOENT;
+	}
+
+	/* Take USB core out of reset */
+	bcma_awrite32(core, BCMA_IOCTL, BCMA_IOCTL_CLK | BCMA_IOCTL_FGC);
+	usleep_range(100, 200);
+	bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+	usleep_range(100, 200);
+	bcma_awrite32(core, BCMA_RESET_CTL, 0);
+	usleep_range(100, 200);
+	bcma_awrite32(core, BCMA_IOCTL, BCMA_IOCTL_CLK);
+	usleep_range(100, 200);
+
+	/* Enable Misc PLL */
+	bcma_write32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT |
+					  BCMA_CLKCTLST_HQCLKREQ |
+					  USB_BCMA_CLKCTLST_USB_CLK_REQ);
+	usleep_range(100, 200);
+
+	bcma_write32(core, 0x510, 0xc7f85000);
+	bcma_write32(core, 0x510, 0xc7f85003);
+	usleep_range(300, 600);
+
+	/* Program USB PHY PLL parameters */
+	bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_ADDR, 0x6);
+	bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_DATA, 0x005360c1);
+	usleep_range(100, 200);
+	bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_ADDR, 0x7);
+	bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_DATA, 0x0);
+	usleep_range(100, 200);
+	bcma_set32(pmu_core, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
+	usleep_range(100, 200);
+
+	bcma_write32(core, 0x510, 0x7f8d007);
+	udelay(1000);
+
+	/* Take controller out of reset */
+	bcma_write32(core, 0x200, 0x4ff);
+	usleep_range(25, 50);
+	bcma_write32(core, 0x200, 0x6ff);
+	usleep_range(25, 50);
+	bcma_write32(core, 0x200, 0x7ff);
+	usleep_range(25, 50);
+
+	of_platform_default_populate(dev->of_node, NULL, dev);
+
+	return 0;
+}
+
+static void bcma_hcd_usb20_ns_init_hc(struct bcma_device *dev)
+{
+	u32 val;
+
+	/* Set packet buffer OUT threshold */
+	val = bcma_read32(dev, 0x94);
+	val &= 0xffff;
+	val |= 0x80 << 16;
+	bcma_write32(dev, 0x94, val);
+
+	/* Enable break memory transfer */
+	val = bcma_read32(dev, 0x9c);
+	val |= 1;
+	bcma_write32(dev, 0x9c, val);
+
+	/*
+	 * Broadcom initializes PHY and then waits to ensure HC is ready to be
+	 * configured. In our case the order is reversed. We just initialized
+	 * controller and we let HCD initialize PHY, so let's wait (sleep) now.
+	 */
+	usleep_range(1000, 2000);
+}
+
+/*
+ * bcma_hcd_usb20_ns_init - Initialize Northstar USB 2.0 controller
+ */
+static int bcma_hcd_usb20_ns_init(struct bcma_hcd_device *bcma_hcd)
+{
+	struct bcma_device *core = bcma_hcd->core;
+	struct bcma_chipinfo *ci = &core->bus->chipinfo;
+	struct device *dev = &core->dev;
+
+	bcma_core_enable(core, 0);
+
+	if (ci->id == BCMA_CHIP_ID_BCM4707 ||
+	    ci->id == BCMA_CHIP_ID_BCM53018)
+		bcma_hcd_usb20_ns_init_hc(core);
+
+	of_platform_default_populate(dev->of_node, NULL, dev);
+
+	return 0;
+}
+
+static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
+{
+	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
+
+	if (!usb_dev->gpio_desc)
+		return;
+
+	gpiod_set_value(usb_dev->gpio_desc, val);
+}
+
+static const struct usb_ehci_pdata ehci_pdata = {
+};
+
+static const struct usb_ohci_pdata ohci_pdata = {
+};
+
+static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev,
+						    const char *name, u32 addr,
+						    const void *data,
+						    size_t size)
+{
+	struct platform_device *hci_dev;
+	struct resource hci_res[2];
+	int ret;
+
+	memset(hci_res, 0, sizeof(hci_res));
+
+	hci_res[0].start = addr;
+	hci_res[0].end = hci_res[0].start + 0x1000 - 1;
+	hci_res[0].flags = IORESOURCE_MEM;
+
+	hci_res[1].start = dev->irq;
+	hci_res[1].flags = IORESOURCE_IRQ;
+
+	hci_dev = platform_device_alloc(name, 0);
+	if (!hci_dev)
+		return ERR_PTR(-ENOMEM);
+
+	hci_dev->dev.parent = &dev->dev;
+	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
+
+	ret = platform_device_add_resources(hci_dev, hci_res,
+					    ARRAY_SIZE(hci_res));
+	if (ret)
+		goto err_alloc;
+	if (data)
+		ret = platform_device_add_data(hci_dev, data, size);
+	if (ret)
+		goto err_alloc;
+	ret = platform_device_add(hci_dev);
+	if (ret)
+		goto err_alloc;
+
+	return hci_dev;
+
+err_alloc:
+	platform_device_put(hci_dev);
+	return ERR_PTR(ret);
+}
+
+static int bcma_hcd_usb20_init(struct bcma_hcd_device *usb_dev)
+{
+	struct bcma_device *dev = usb_dev->core;
+	struct bcma_chipinfo *chipinfo = &dev->bus->chipinfo;
+	u32 ohci_addr;
+	int err;
+
+	if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
+		return -EOPNOTSUPP;
+
+	bcma_hcd_init_chip_mips(dev);
+
+	/* In AI chips EHCI is addrspace 0, OHCI is 1 */
+	ohci_addr = dev->addr_s[0];
+	if ((chipinfo->id == BCMA_CHIP_ID_BCM5357 ||
+	     chipinfo->id == BCMA_CHIP_ID_BCM4749)
+	    && chipinfo->rev == 0)
+		ohci_addr = 0x18009000;
+
+	usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform",
+						 ohci_addr, &ohci_pdata,
+						 sizeof(ohci_pdata));
+	if (IS_ERR(usb_dev->ohci_dev))
+		return PTR_ERR(usb_dev->ohci_dev);
+
+	usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform",
+						 dev->addr, &ehci_pdata,
+						 sizeof(ehci_pdata));
+	if (IS_ERR(usb_dev->ehci_dev)) {
+		err = PTR_ERR(usb_dev->ehci_dev);
+		goto err_unregister_ohci_dev;
+	}
+
+	return 0;
+
+err_unregister_ohci_dev:
+	platform_device_unregister(usb_dev->ohci_dev);
+	return err;
+}
+
+static int bcma_hcd_usb30_init(struct bcma_hcd_device *bcma_hcd)
+{
+	struct bcma_device *core = bcma_hcd->core;
+	struct device *dev = &core->dev;
+
+	bcma_core_enable(core, 0);
+
+	of_platform_default_populate(dev->of_node, NULL, dev);
+
+	return 0;
+}
+
+static int bcma_hcd_probe(struct bcma_device *core)
+{
+	int err;
+	struct bcma_hcd_device *usb_dev;
+
+	/* TODO: Probably need checks here; is the core connected? */
+
+	usb_dev = devm_kzalloc(&core->dev, sizeof(struct bcma_hcd_device),
+			       GFP_KERNEL);
+	if (!usb_dev)
+		return -ENOMEM;
+	usb_dev->core = core;
+
+	usb_dev->gpio_desc = devm_gpiod_get_optional(&core->dev, "vcc",
+						     GPIOD_OUT_HIGH);
+	if (IS_ERR(usb_dev->gpio_desc))
+		return dev_err_probe(&core->dev, PTR_ERR(usb_dev->gpio_desc),
+				     "error obtaining VCC GPIO");
+
+	switch (core->id.id) {
+	case BCMA_CORE_USB20_HOST:
+		if (IS_ENABLED(CONFIG_ARM))
+			err = bcma_hcd_usb20_old_arm_init(usb_dev);
+		else if (IS_ENABLED(CONFIG_MIPS))
+			err = bcma_hcd_usb20_init(usb_dev);
+		else
+			err = -ENOTSUPP;
+		break;
+	case BCMA_CORE_NS_USB20:
+		err = bcma_hcd_usb20_ns_init(usb_dev);
+		break;
+	case BCMA_CORE_NS_USB30:
+		err = bcma_hcd_usb30_init(usb_dev);
+		break;
+	default:
+		return -ENODEV;
+	}
+	if (err)
+		return err;
+
+	bcma_set_drvdata(core, usb_dev);
+	return 0;
+}
+
+static void bcma_hcd_remove(struct bcma_device *dev)
+{
+	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
+	struct platform_device *ohci_dev = usb_dev->ohci_dev;
+	struct platform_device *ehci_dev = usb_dev->ehci_dev;
+
+	if (ohci_dev)
+		platform_device_unregister(ohci_dev);
+	if (ehci_dev)
+		platform_device_unregister(ehci_dev);
+
+	bcma_core_disable(dev, 0);
+}
+
+static void bcma_hcd_shutdown(struct bcma_device *dev)
+{
+	bcma_hci_platform_power_gpio(dev, false);
+	bcma_core_disable(dev, 0);
+}
+
+#ifdef CONFIG_PM
+
+static int bcma_hcd_suspend(struct bcma_device *dev)
+{
+	bcma_hci_platform_power_gpio(dev, false);
+	bcma_core_disable(dev, 0);
+
+	return 0;
+}
+
+static int bcma_hcd_resume(struct bcma_device *dev)
+{
+	bcma_hci_platform_power_gpio(dev, true);
+	bcma_core_enable(dev, 0);
+
+	return 0;
+}
+
+#else /* !CONFIG_PM */
+#define bcma_hcd_suspend	NULL
+#define bcma_hcd_resume	NULL
+#endif /* CONFIG_PM */
+
+static const struct bcma_device_id bcma_hcd_table[] = {
+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS),
+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB30, BCMA_ANY_REV, BCMA_ANY_CLASS),
+	{},
+};
+MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
+
+static struct bcma_driver bcma_hcd_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= bcma_hcd_table,
+	.probe		= bcma_hcd_probe,
+	.remove		= bcma_hcd_remove,
+	.shutdown	= bcma_hcd_shutdown,
+	.suspend	= bcma_hcd_suspend,
+	.resume		= bcma_hcd_resume,
+};
+module_bcma_driver(bcma_hcd_driver);
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
new file mode 100644
index 000000000..8b775e7ba
--- /dev/null
+++ b/drivers/usb/host/ehci-atmel.c
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for EHCI UHP on Atmel chips
+ *
+ *  Copyright (C) 2009 Atmel Corporation,
+ *                     Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ *  Based on various ehci-*.c drivers
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/of.h>
+
+#include "ehci.h"
+
+#define DRIVER_DESC "EHCI Atmel driver"
+
+#define EHCI_INSNREG(index)			((index) * 4 + 0x90)
+#define EHCI_INSNREG08_HSIC_EN			BIT(2)
+
+/* interface and function clocks */
+#define hcd_to_atmel_ehci_priv(h) \
+	((struct atmel_ehci_priv *)hcd_to_ehci(h)->priv)
+
+struct atmel_ehci_priv {
+	struct clk *iclk;
+	struct clk *uclk;
+	bool clocked;
+};
+
+static struct hc_driver __read_mostly ehci_atmel_hc_driver;
+
+static const struct ehci_driver_overrides ehci_atmel_drv_overrides __initconst = {
+	.extra_priv_size = sizeof(struct atmel_ehci_priv),
+};
+
+/*-------------------------------------------------------------------------*/
+
+static void atmel_start_clock(struct atmel_ehci_priv *atmel_ehci)
+{
+	if (atmel_ehci->clocked)
+		return;
+
+	clk_prepare_enable(atmel_ehci->uclk);
+	clk_prepare_enable(atmel_ehci->iclk);
+	atmel_ehci->clocked = true;
+}
+
+static void atmel_stop_clock(struct atmel_ehci_priv *atmel_ehci)
+{
+	if (!atmel_ehci->clocked)
+		return;
+
+	clk_disable_unprepare(atmel_ehci->iclk);
+	clk_disable_unprepare(atmel_ehci->uclk);
+	atmel_ehci->clocked = false;
+}
+
+static void atmel_start_ehci(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct atmel_ehci_priv *atmel_ehci = hcd_to_atmel_ehci_priv(hcd);
+
+	dev_dbg(&pdev->dev, "start\n");
+	atmel_start_clock(atmel_ehci);
+}
+
+static void atmel_stop_ehci(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct atmel_ehci_priv *atmel_ehci = hcd_to_atmel_ehci_priv(hcd);
+
+	dev_dbg(&pdev->dev, "stop\n");
+	atmel_stop_clock(atmel_ehci);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int ehci_atmel_drv_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	const struct hc_driver *driver = &ehci_atmel_hc_driver;
+	struct resource *res;
+	struct ehci_hcd *ehci;
+	struct atmel_ehci_priv *atmel_ehci;
+	int irq;
+	int retval;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_debug("Initializing Atmel-SoC USB Host Controller\n");
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		retval = -ENODEV;
+		goto fail_create_hcd;
+	}
+
+	/* Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	retval = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (retval)
+		goto fail_create_hcd;
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto fail_create_hcd;
+	}
+	atmel_ehci = hcd_to_atmel_ehci_priv(hcd);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(hcd->regs)) {
+		retval = PTR_ERR(hcd->regs);
+		goto fail_request_resource;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	atmel_ehci->iclk = devm_clk_get(&pdev->dev, "ehci_clk");
+	if (IS_ERR(atmel_ehci->iclk)) {
+		dev_err(&pdev->dev, "Error getting interface clock\n");
+		retval = -ENOENT;
+		goto fail_request_resource;
+	}
+
+	atmel_ehci->uclk = devm_clk_get(&pdev->dev, "usb_clk");
+	if (IS_ERR(atmel_ehci->uclk)) {
+		dev_err(&pdev->dev, "failed to get uclk\n");
+		retval = PTR_ERR(atmel_ehci->uclk);
+		goto fail_request_resource;
+	}
+
+	ehci = hcd_to_ehci(hcd);
+	/* registers start at offset 0x0 */
+	ehci->caps = hcd->regs;
+
+	atmel_start_ehci(pdev);
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval)
+		goto fail_add_hcd;
+	device_wakeup_enable(hcd->self.controller);
+
+	if (of_usb_get_phy_mode(pdev->dev.of_node) == USBPHY_INTERFACE_MODE_HSIC)
+		writel(EHCI_INSNREG08_HSIC_EN, hcd->regs + EHCI_INSNREG(8));
+
+	return retval;
+
+fail_add_hcd:
+	atmel_stop_ehci(pdev);
+fail_request_resource:
+	usb_put_hcd(hcd);
+fail_create_hcd:
+	dev_err(&pdev->dev, "init %s fail, %d\n",
+		dev_name(&pdev->dev), retval);
+
+	return retval;
+}
+
+static int ehci_atmel_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	usb_put_hcd(hcd);
+
+	atmel_stop_ehci(pdev);
+
+	return 0;
+}
+
+static int __maybe_unused ehci_atmel_drv_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct atmel_ehci_priv *atmel_ehci = hcd_to_atmel_ehci_priv(hcd);
+	int ret;
+
+	ret = ehci_suspend(hcd, false);
+	if (ret)
+		return ret;
+
+	atmel_stop_clock(atmel_ehci);
+	return 0;
+}
+
+static int __maybe_unused ehci_atmel_drv_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct atmel_ehci_priv *atmel_ehci = hcd_to_atmel_ehci_priv(hcd);
+
+	atmel_start_clock(atmel_ehci);
+	ehci_resume(hcd, false);
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id atmel_ehci_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9g45-ehci" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_ehci_dt_ids);
+#endif
+
+static SIMPLE_DEV_PM_OPS(ehci_atmel_pm_ops, ehci_atmel_drv_suspend,
+					ehci_atmel_drv_resume);
+
+static struct platform_driver ehci_atmel_driver = {
+	.probe		= ehci_atmel_drv_probe,
+	.remove		= ehci_atmel_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "atmel-ehci",
+		.pm	= &ehci_atmel_pm_ops,
+		.of_match_table	= of_match_ptr(atmel_ehci_dt_ids),
+	},
+};
+
+static int __init ehci_atmel_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ehci_init_driver(&ehci_atmel_hc_driver, &ehci_atmel_drv_overrides);
+	return platform_driver_register(&ehci_atmel_driver);
+}
+module_init(ehci_atmel_init);
+
+static void __exit ehci_atmel_cleanup(void)
+{
+	platform_driver_unregister(&ehci_atmel_driver);
+}
+module_exit(ehci_atmel_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_ALIAS("platform:atmel-ehci");
+MODULE_AUTHOR("Nicolas Ferre");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci-brcm.c b/drivers/usb/host/ehci-brcm.c
new file mode 100644
index 000000000..6a0f64c9e
--- /dev/null
+++ b/drivers/usb/host/ehci-brcm.c
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2020, Broadcom */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/iopoll.h>
+
+#include "ehci.h"
+
+#define hcd_to_ehci_priv(h) ((struct brcm_priv *)hcd_to_ehci(h)->priv)
+
+struct brcm_priv {
+	struct clk *clk;
+};
+
+/*
+ * ehci_brcm_wait_for_sof
+ * Wait for start of next microframe, then wait extra delay microseconds
+ */
+static inline void ehci_brcm_wait_for_sof(struct ehci_hcd *ehci, u32 delay)
+{
+	u32 frame_idx = ehci_readl(ehci, &ehci->regs->frame_index);
+	u32 val;
+	int res;
+
+	/* Wait for next microframe (every 125 usecs) */
+	res = readl_relaxed_poll_timeout(&ehci->regs->frame_index, val,
+					 val != frame_idx, 1, 130);
+	if (res)
+		ehci_err(ehci, "Error waiting for SOF\n");
+	udelay(delay);
+}
+
+/*
+ * ehci_brcm_hub_control
+ * The EHCI controller has a bug where it can violate the SOF
+ * interval between the first two SOF's transmitted after resume
+ * if the resume occurs near the end of the microframe. This causees
+ * the controller to detect babble on the suspended port and
+ * will eventually cause the controller to reset the port.
+ * The fix is to Intercept the echi-hcd request to complete RESUME and
+ * align it to the start of the next microframe.
+ * See SWLINUX-1909 for more details
+ */
+static int ehci_brcm_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength)
+{
+	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
+	int		ports = HCS_N_PORTS(ehci->hcs_params);
+	u32 __iomem	*status_reg;
+	unsigned long flags;
+	int retval, irq_disabled = 0;
+	u32 temp;
+
+	temp = (wIndex & 0xff) - 1;
+	if (temp >= HCS_N_PORTS_MAX)	/* Avoid index-out-of-bounds warning */
+		temp = 0;
+	status_reg = &ehci->regs->port_status[temp];
+
+	/*
+	 * RESUME is cleared when GetPortStatus() is called 20ms after start
+	 * of RESUME
+	 */
+	if ((typeReq == GetPortStatus) &&
+	    (wIndex && wIndex <= ports) &&
+	    ehci->reset_done[wIndex-1] &&
+	    time_after_eq(jiffies, ehci->reset_done[wIndex-1]) &&
+	    (ehci_readl(ehci, status_reg) & PORT_RESUME)) {
+
+		/*
+		 * to make sure we are not interrupted until RESUME bit
+		 * is cleared, disable interrupts on current CPU
+		 */
+		ehci_dbg(ehci, "SOF alignment workaround\n");
+		irq_disabled = 1;
+		local_irq_save(flags);
+		ehci_brcm_wait_for_sof(ehci, 5);
+	}
+	retval = ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+	if (irq_disabled)
+		local_irq_restore(flags);
+	return retval;
+}
+
+static int ehci_brcm_reset(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int len;
+
+	ehci->big_endian_mmio = 1;
+
+	ehci->caps = (void __iomem *)hcd->regs;
+	len = HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
+	ehci->regs = (void __iomem *)(hcd->regs + len);
+
+	/* This fixes the lockup during reboot due to prior interrupts */
+	ehci_writel(ehci, CMD_RESET, &ehci->regs->command);
+	mdelay(10);
+
+	/*
+	 * SWLINUX-1705: Avoid OUT packet underflows during high memory
+	 *   bus usage
+	 */
+	ehci_writel(ehci, 0x00800040, &ehci->regs->brcm_insnreg[1]);
+	ehci_writel(ehci, 0x00000001, &ehci->regs->brcm_insnreg[3]);
+
+	return ehci_setup(hcd);
+}
+
+static struct hc_driver __read_mostly ehci_brcm_hc_driver;
+
+static const struct ehci_driver_overrides brcm_overrides __initconst = {
+	.reset = ehci_brcm_reset,
+	.extra_priv_size = sizeof(struct brcm_priv),
+};
+
+static int ehci_brcm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res_mem;
+	struct brcm_priv *priv;
+	struct usb_hcd *hcd;
+	int irq;
+	int err;
+
+	err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	if (err)
+		return err;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0)
+		return irq ? irq : -EINVAL;
+
+	/* Hook the hub control routine to work around a bug */
+	ehci_brcm_hc_driver.hub_control = ehci_brcm_hub_control;
+
+	/* initialize hcd */
+	hcd = usb_create_hcd(&ehci_brcm_hc_driver, dev, dev_name(dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, hcd);
+	priv = hcd_to_ehci_priv(hcd);
+
+	priv->clk = devm_clk_get_optional(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		err = PTR_ERR(priv->clk);
+		goto err_hcd;
+	}
+
+	err = clk_prepare_enable(priv->clk);
+	if (err)
+		goto err_hcd;
+
+	hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res_mem);
+	if (IS_ERR(hcd->regs)) {
+		err = PTR_ERR(hcd->regs);
+		goto err_clk;
+	}
+	hcd->rsrc_start = res_mem->start;
+	hcd->rsrc_len = resource_size(res_mem);
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (err)
+		goto err_clk;
+
+	device_wakeup_enable(hcd->self.controller);
+	device_enable_async_suspend(hcd->self.controller);
+
+	return 0;
+
+err_clk:
+	clk_disable_unprepare(priv->clk);
+err_hcd:
+	usb_put_hcd(hcd);
+
+	return err;
+}
+
+static int ehci_brcm_remove(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct brcm_priv *priv = hcd_to_ehci_priv(hcd);
+
+	usb_remove_hcd(hcd);
+	clk_disable_unprepare(priv->clk);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+static int __maybe_unused ehci_brcm_suspend(struct device *dev)
+{
+	int ret;
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct brcm_priv *priv = hcd_to_ehci_priv(hcd);
+	bool do_wakeup = device_may_wakeup(dev);
+
+	ret = ehci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+	clk_disable_unprepare(priv->clk);
+	return 0;
+}
+
+static int __maybe_unused ehci_brcm_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	struct brcm_priv *priv = hcd_to_ehci_priv(hcd);
+	int err;
+
+	err = clk_prepare_enable(priv->clk);
+	if (err)
+		return err;
+	/*
+	 * SWLINUX-1705: Avoid OUT packet underflows during high memory
+	 *   bus usage
+	 */
+	ehci_writel(ehci, 0x00800040, &ehci->regs->brcm_insnreg[1]);
+	ehci_writel(ehci, 0x00000001, &ehci->regs->brcm_insnreg[3]);
+
+	ehci_resume(hcd, false);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ehci_brcm_pm_ops, ehci_brcm_suspend,
+		ehci_brcm_resume);
+
+static const struct of_device_id brcm_ehci_of_match[] = {
+	{ .compatible = "brcm,ehci-brcm-v2", },
+	{ .compatible = "brcm,bcm7445-ehci", },
+	{}
+};
+
+static struct platform_driver ehci_brcm_driver = {
+	.probe		= ehci_brcm_probe,
+	.remove		= ehci_brcm_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "ehci-brcm",
+		.pm	= &ehci_brcm_pm_ops,
+		.of_match_table = brcm_ehci_of_match,
+	}
+};
+
+static int __init ehci_brcm_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ehci_init_driver(&ehci_brcm_hc_driver, &brcm_overrides);
+	return platform_driver_register(&ehci_brcm_driver);
+}
+module_init(ehci_brcm_init);
+
+static void __exit ehci_brcm_exit(void)
+{
+	platform_driver_unregister(&ehci_brcm_driver);
+}
+module_exit(ehci_brcm_exit);
+
+MODULE_ALIAS("platform:ehci-brcm");
+MODULE_DESCRIPTION("EHCI Broadcom STB driver");
+MODULE_AUTHOR("Al Cooper");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
new file mode 100644
index 000000000..c063fb042
--- /dev/null
+++ b/drivers/usb/host/ehci-dbg.c
@@ -0,0 +1,1081 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ */
+
+/* this file is part of ehci-hcd.c */
+
+#ifdef CONFIG_DYNAMIC_DEBUG
+
+/*
+ * check the values in the HCSPARAMS register
+ * (host controller _Structural_ parameters)
+ * see EHCI spec, Table 2-4 for each value
+ */
+static void dbg_hcs_params(struct ehci_hcd *ehci, char *label)
+{
+	u32	params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	ehci_dbg(ehci,
+		"%s hcs_params 0x%x dbg=%d%s cc=%d pcc=%d%s%s ports=%d\n",
+		label, params,
+		HCS_DEBUG_PORT(params),
+		HCS_INDICATOR(params) ? " ind" : "",
+		HCS_N_CC(params),
+		HCS_N_PCC(params),
+		HCS_PORTROUTED(params) ? "" : " ordered",
+		HCS_PPC(params) ? "" : " !ppc",
+		HCS_N_PORTS(params));
+	/* Port routing, per EHCI 0.95 Spec, Section 2.2.5 */
+	if (HCS_PORTROUTED(params)) {
+		int i;
+		char buf[46], tmp[7], byte;
+
+		buf[0] = 0;
+		for (i = 0; i < HCS_N_PORTS(params); i++) {
+			/* FIXME MIPS won't readb() ... */
+			byte = readb(&ehci->caps->portroute[(i >> 1)]);
+			sprintf(tmp, "%d ",
+				(i & 0x1) ? byte & 0xf : (byte >> 4) & 0xf);
+			strcat(buf, tmp);
+		}
+		ehci_dbg(ehci, "%s portroute %s\n", label, buf);
+	}
+}
+
+/*
+ * check the values in the HCCPARAMS register
+ * (host controller _Capability_ parameters)
+ * see EHCI Spec, Table 2-5 for each value
+ */
+static void dbg_hcc_params(struct ehci_hcd *ehci, char *label)
+{
+	u32	params = ehci_readl(ehci, &ehci->caps->hcc_params);
+
+	if (HCC_ISOC_CACHE(params)) {
+		ehci_dbg(ehci,
+			"%s hcc_params %04x caching frame %s%s%s\n",
+			label, params,
+			HCC_PGM_FRAMELISTLEN(params) ? "256/512/1024" : "1024",
+			HCC_CANPARK(params) ? " park" : "",
+			HCC_64BIT_ADDR(params) ? " 64 bit addr" : "");
+	} else {
+		ehci_dbg(ehci,
+			"%s hcc_params %04x thresh %d uframes %s%s%s%s%s%s%s\n",
+			label,
+			params,
+			HCC_ISOC_THRES(params),
+			HCC_PGM_FRAMELISTLEN(params) ? "256/512/1024" : "1024",
+			HCC_CANPARK(params) ? " park" : "",
+			HCC_64BIT_ADDR(params) ? " 64 bit addr" : "",
+			HCC_LPM(params) ? " LPM" : "",
+			HCC_PER_PORT_CHANGE_EVENT(params) ? " ppce" : "",
+			HCC_HW_PREFETCH(params) ? " hw prefetch" : "",
+			HCC_32FRAME_PERIODIC_LIST(params) ?
+				" 32 periodic list" : "");
+	}
+}
+
+static void __maybe_unused
+dbg_qtd(const char *label, struct ehci_hcd *ehci, struct ehci_qtd *qtd)
+{
+	ehci_dbg(ehci, "%s td %p n%08x %08x t%08x p0=%08x\n", label, qtd,
+		hc32_to_cpup(ehci, &qtd->hw_next),
+		hc32_to_cpup(ehci, &qtd->hw_alt_next),
+		hc32_to_cpup(ehci, &qtd->hw_token),
+		hc32_to_cpup(ehci, &qtd->hw_buf[0]));
+	if (qtd->hw_buf[1])
+		ehci_dbg(ehci, "  p1=%08x p2=%08x p3=%08x p4=%08x\n",
+			hc32_to_cpup(ehci, &qtd->hw_buf[1]),
+			hc32_to_cpup(ehci, &qtd->hw_buf[2]),
+			hc32_to_cpup(ehci, &qtd->hw_buf[3]),
+			hc32_to_cpup(ehci, &qtd->hw_buf[4]));
+}
+
+static void __maybe_unused
+dbg_qh(const char *label, struct ehci_hcd *ehci, struct ehci_qh *qh)
+{
+	struct ehci_qh_hw *hw = qh->hw;
+
+	ehci_dbg(ehci, "%s qh %p n%08x info %x %x qtd %x\n", label,
+		qh, hw->hw_next, hw->hw_info1, hw->hw_info2, hw->hw_current);
+	dbg_qtd("overlay", ehci, (struct ehci_qtd *) &hw->hw_qtd_next);
+}
+
+static void __maybe_unused
+dbg_itd(const char *label, struct ehci_hcd *ehci, struct ehci_itd *itd)
+{
+	ehci_dbg(ehci, "%s [%d] itd %p, next %08x, urb %p\n",
+		label, itd->frame, itd, hc32_to_cpu(ehci, itd->hw_next),
+		itd->urb);
+	ehci_dbg(ehci,
+		"  trans: %08x %08x %08x %08x %08x %08x %08x %08x\n",
+		hc32_to_cpu(ehci, itd->hw_transaction[0]),
+		hc32_to_cpu(ehci, itd->hw_transaction[1]),
+		hc32_to_cpu(ehci, itd->hw_transaction[2]),
+		hc32_to_cpu(ehci, itd->hw_transaction[3]),
+		hc32_to_cpu(ehci, itd->hw_transaction[4]),
+		hc32_to_cpu(ehci, itd->hw_transaction[5]),
+		hc32_to_cpu(ehci, itd->hw_transaction[6]),
+		hc32_to_cpu(ehci, itd->hw_transaction[7]));
+	ehci_dbg(ehci,
+		"  buf:   %08x %08x %08x %08x %08x %08x %08x\n",
+		hc32_to_cpu(ehci, itd->hw_bufp[0]),
+		hc32_to_cpu(ehci, itd->hw_bufp[1]),
+		hc32_to_cpu(ehci, itd->hw_bufp[2]),
+		hc32_to_cpu(ehci, itd->hw_bufp[3]),
+		hc32_to_cpu(ehci, itd->hw_bufp[4]),
+		hc32_to_cpu(ehci, itd->hw_bufp[5]),
+		hc32_to_cpu(ehci, itd->hw_bufp[6]));
+	ehci_dbg(ehci, "  index: %d %d %d %d %d %d %d %d\n",
+		itd->index[0], itd->index[1], itd->index[2],
+		itd->index[3], itd->index[4], itd->index[5],
+		itd->index[6], itd->index[7]);
+}
+
+static void __maybe_unused
+dbg_sitd(const char *label, struct ehci_hcd *ehci, struct ehci_sitd *sitd)
+{
+	ehci_dbg(ehci, "%s [%d] sitd %p, next %08x, urb %p\n",
+		label, sitd->frame, sitd, hc32_to_cpu(ehci, sitd->hw_next),
+		sitd->urb);
+	ehci_dbg(ehci,
+		"  addr %08x sched %04x result %08x buf %08x %08x\n",
+		hc32_to_cpu(ehci, sitd->hw_fullspeed_ep),
+		hc32_to_cpu(ehci, sitd->hw_uframe),
+		hc32_to_cpu(ehci, sitd->hw_results),
+		hc32_to_cpu(ehci, sitd->hw_buf[0]),
+		hc32_to_cpu(ehci, sitd->hw_buf[1]));
+}
+
+static int __maybe_unused
+dbg_status_buf(char *buf, unsigned len, const char *label, u32 status)
+{
+	return scnprintf(buf, len,
+		"%s%sstatus %04x%s%s%s%s%s%s%s%s%s%s%s",
+		label, label[0] ? " " : "", status,
+		(status & STS_PPCE_MASK) ? " PPCE" : "",
+		(status & STS_ASS) ? " Async" : "",
+		(status & STS_PSS) ? " Periodic" : "",
+		(status & STS_RECL) ? " Recl" : "",
+		(status & STS_HALT) ? " Halt" : "",
+		(status & STS_IAA) ? " IAA" : "",
+		(status & STS_FATAL) ? " FATAL" : "",
+		(status & STS_FLR) ? " FLR" : "",
+		(status & STS_PCD) ? " PCD" : "",
+		(status & STS_ERR) ? " ERR" : "",
+		(status & STS_INT) ? " INT" : "");
+}
+
+static int __maybe_unused
+dbg_intr_buf(char *buf, unsigned len, const char *label, u32 enable)
+{
+	return scnprintf(buf, len,
+		"%s%sintrenable %02x%s%s%s%s%s%s%s",
+		label, label[0] ? " " : "", enable,
+		(enable & STS_PPCE_MASK) ? " PPCE" : "",
+		(enable & STS_IAA) ? " IAA" : "",
+		(enable & STS_FATAL) ? " FATAL" : "",
+		(enable & STS_FLR) ? " FLR" : "",
+		(enable & STS_PCD) ? " PCD" : "",
+		(enable & STS_ERR) ? " ERR" : "",
+		(enable & STS_INT) ? " INT" : "");
+}
+
+static const char *const fls_strings[] = { "1024", "512", "256", "??" };
+
+static int
+dbg_command_buf(char *buf, unsigned len, const char *label, u32 command)
+{
+	return scnprintf(buf, len,
+		"%s%scommand %07x %s%s%s%s%s%s=%d ithresh=%d%s%s%s%s "
+		"period=%s%s %s",
+		label, label[0] ? " " : "", command,
+		(command & CMD_HIRD) ? " HIRD" : "",
+		(command & CMD_PPCEE) ? " PPCEE" : "",
+		(command & CMD_FSP) ? " FSP" : "",
+		(command & CMD_ASPE) ? " ASPE" : "",
+		(command & CMD_PSPE) ? " PSPE" : "",
+		(command & CMD_PARK) ? " park" : "(park)",
+		CMD_PARK_CNT(command),
+		(command >> 16) & 0x3f,
+		(command & CMD_LRESET) ? " LReset" : "",
+		(command & CMD_IAAD) ? " IAAD" : "",
+		(command & CMD_ASE) ? " Async" : "",
+		(command & CMD_PSE) ? " Periodic" : "",
+		fls_strings[(command >> 2) & 0x3],
+		(command & CMD_RESET) ? " Reset" : "",
+		(command & CMD_RUN) ? "RUN" : "HALT");
+}
+
+static int
+dbg_port_buf(char *buf, unsigned len, const char *label, int port, u32 status)
+{
+	char	*sig;
+
+	/* signaling state */
+	switch (status & (3 << 10)) {
+	case 0 << 10:
+		sig = "se0";
+		break;
+	case 1 << 10: /* low speed */
+		sig = "k";
+		break;
+	case 2 << 10:
+		sig = "j";
+		break;
+	default:
+		sig = "?";
+		break;
+	}
+
+	return scnprintf(buf, len,
+		"%s%sport:%d status %06x %d %s%s%s%s%s%s "
+		"sig=%s%s%s%s%s%s%s%s%s%s%s",
+		label, label[0] ? " " : "", port, status,
+		status >> 25, /*device address */
+		(status & PORT_SSTS) >> 23 == PORTSC_SUSPEND_STS_ACK ?
+						" ACK" : "",
+		(status & PORT_SSTS) >> 23 == PORTSC_SUSPEND_STS_NYET ?
+						" NYET" : "",
+		(status & PORT_SSTS) >> 23 == PORTSC_SUSPEND_STS_STALL ?
+						" STALL" : "",
+		(status & PORT_SSTS) >> 23 == PORTSC_SUSPEND_STS_ERR ?
+						" ERR" : "",
+		(status & PORT_POWER) ? " POWER" : "",
+		(status & PORT_OWNER) ? " OWNER" : "",
+		sig,
+		(status & PORT_LPM) ? " LPM" : "",
+		(status & PORT_RESET) ? " RESET" : "",
+		(status & PORT_SUSPEND) ? " SUSPEND" : "",
+		(status & PORT_RESUME) ? " RESUME" : "",
+		(status & PORT_OCC) ? " OCC" : "",
+		(status & PORT_OC) ? " OC" : "",
+		(status & PORT_PEC) ? " PEC" : "",
+		(status & PORT_PE) ? " PE" : "",
+		(status & PORT_CSC) ? " CSC" : "",
+		(status & PORT_CONNECT) ? " CONNECT" : "");
+}
+
+static inline void
+dbg_status(struct ehci_hcd *ehci, const char *label, u32 status)
+{
+	char buf[80];
+
+	dbg_status_buf(buf, sizeof(buf), label, status);
+	ehci_dbg(ehci, "%s\n", buf);
+}
+
+static inline void
+dbg_cmd(struct ehci_hcd *ehci, const char *label, u32 command)
+{
+	char buf[80];
+
+	dbg_command_buf(buf, sizeof(buf), label, command);
+	ehci_dbg(ehci, "%s\n", buf);
+}
+
+static inline void
+dbg_port(struct ehci_hcd *ehci, const char *label, int port, u32 status)
+{
+	char buf[80];
+
+	dbg_port_buf(buf, sizeof(buf), label, port, status);
+	ehci_dbg(ehci, "%s\n", buf);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* troubleshooting help: expose state in debugfs */
+
+static int debug_async_open(struct inode *, struct file *);
+static int debug_bandwidth_open(struct inode *, struct file *);
+static int debug_periodic_open(struct inode *, struct file *);
+static int debug_registers_open(struct inode *, struct file *);
+
+static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*);
+static int debug_close(struct inode *, struct file *);
+
+static const struct file_operations debug_async_fops = {
+	.owner		= THIS_MODULE,
+	.open		= debug_async_open,
+	.read		= debug_output,
+	.release	= debug_close,
+	.llseek		= default_llseek,
+};
+
+static const struct file_operations debug_bandwidth_fops = {
+	.owner		= THIS_MODULE,
+	.open		= debug_bandwidth_open,
+	.read		= debug_output,
+	.release	= debug_close,
+	.llseek		= default_llseek,
+};
+
+static const struct file_operations debug_periodic_fops = {
+	.owner		= THIS_MODULE,
+	.open		= debug_periodic_open,
+	.read		= debug_output,
+	.release	= debug_close,
+	.llseek		= default_llseek,
+};
+
+static const struct file_operations debug_registers_fops = {
+	.owner		= THIS_MODULE,
+	.open		= debug_registers_open,
+	.read		= debug_output,
+	.release	= debug_close,
+	.llseek		= default_llseek,
+};
+
+static struct dentry *ehci_debug_root;
+
+struct debug_buffer {
+	ssize_t (*fill_func)(struct debug_buffer *);	/* fill method */
+	struct usb_bus *bus;
+	struct mutex mutex;	/* protect filling of buffer */
+	size_t count;		/* number of characters filled into buffer */
+	char *output_buf;
+	size_t alloc_size;
+};
+
+static inline char speed_char(u32 info1)
+{
+	switch (info1 & (3 << 12)) {
+	case QH_FULL_SPEED:
+		return 'f';
+	case QH_LOW_SPEED:
+		return 'l';
+	case QH_HIGH_SPEED:
+		return 'h';
+	default:
+		return '?';
+	}
+}
+
+static inline char token_mark(struct ehci_hcd *ehci, __hc32 token)
+{
+	__u32 v = hc32_to_cpu(ehci, token);
+
+	if (v & QTD_STS_ACTIVE)
+		return '*';
+	if (v & QTD_STS_HALT)
+		return '-';
+	if (!IS_SHORT_READ(v))
+		return ' ';
+	/* tries to advance through hw_alt_next */
+	return '/';
+}
+
+static void qh_lines(struct ehci_hcd *ehci, struct ehci_qh *qh,
+		char **nextp, unsigned *sizep)
+{
+	u32			scratch;
+	u32			hw_curr;
+	struct list_head	*entry;
+	struct ehci_qtd		*td;
+	unsigned		temp;
+	unsigned		size = *sizep;
+	char			*next = *nextp;
+	char			mark;
+	__le32			list_end = EHCI_LIST_END(ehci);
+	struct ehci_qh_hw	*hw = qh->hw;
+
+	if (hw->hw_qtd_next == list_end)	/* NEC does this */
+		mark = '@';
+	else
+		mark = token_mark(ehci, hw->hw_token);
+	if (mark == '/') {	/* qh_alt_next controls qh advance? */
+		if ((hw->hw_alt_next & QTD_MASK(ehci))
+				== ehci->async->hw->hw_alt_next)
+			mark = '#';	/* blocked */
+		else if (hw->hw_alt_next == list_end)
+			mark = '.';	/* use hw_qtd_next */
+		/* else alt_next points to some other qtd */
+	}
+	scratch = hc32_to_cpup(ehci, &hw->hw_info1);
+	hw_curr = (mark == '*') ? hc32_to_cpup(ehci, &hw->hw_current) : 0;
+	temp = scnprintf(next, size,
+			"qh/%p dev%d %cs ep%d %08x %08x (%08x%c %s nak%d)"
+			" [cur %08x next %08x buf[0] %08x]",
+			qh, scratch & 0x007f,
+			speed_char (scratch),
+			(scratch >> 8) & 0x000f,
+			scratch, hc32_to_cpup(ehci, &hw->hw_info2),
+			hc32_to_cpup(ehci, &hw->hw_token), mark,
+			(cpu_to_hc32(ehci, QTD_TOGGLE) & hw->hw_token)
+				? "data1" : "data0",
+			(hc32_to_cpup(ehci, &hw->hw_alt_next) >> 1) & 0x0f,
+			hc32_to_cpup(ehci, &hw->hw_current),
+			hc32_to_cpup(ehci, &hw->hw_qtd_next),
+			hc32_to_cpup(ehci, &hw->hw_buf[0]));
+	size -= temp;
+	next += temp;
+
+	/* hc may be modifying the list as we read it ... */
+	list_for_each(entry, &qh->qtd_list) {
+		char *type;
+
+		td = list_entry(entry, struct ehci_qtd, qtd_list);
+		scratch = hc32_to_cpup(ehci, &td->hw_token);
+		mark = ' ';
+		if (hw_curr == td->qtd_dma) {
+			mark = '*';
+		} else if (hw->hw_qtd_next == cpu_to_hc32(ehci, td->qtd_dma)) {
+			mark = '+';
+		} else if (QTD_LENGTH(scratch)) {
+			if (td->hw_alt_next == ehci->async->hw->hw_alt_next)
+				mark = '#';
+			else if (td->hw_alt_next != list_end)
+				mark = '/';
+		}
+		switch ((scratch >> 8) & 0x03) {
+		case 0:
+			type = "out";
+			break;
+		case 1:
+			type = "in";
+			break;
+		case 2:
+			type = "setup";
+			break;
+		default:
+			type = "?";
+			break;
+		}
+		temp = scnprintf(next, size,
+				"\n\t%p%c%s len=%d %08x urb %p"
+				" [td %08x buf[0] %08x]",
+				td, mark, type,
+				(scratch >> 16) & 0x7fff,
+				scratch,
+				td->urb,
+				(u32) td->qtd_dma,
+				hc32_to_cpup(ehci, &td->hw_buf[0]));
+		size -= temp;
+		next += temp;
+		if (temp == size)
+			goto done;
+	}
+
+	temp = scnprintf(next, size, "\n");
+	size -= temp;
+	next += temp;
+
+done:
+	*sizep = size;
+	*nextp = next;
+}
+
+static ssize_t fill_async_buffer(struct debug_buffer *buf)
+{
+	struct usb_hcd		*hcd;
+	struct ehci_hcd		*ehci;
+	unsigned long		flags;
+	unsigned		temp, size;
+	char			*next;
+	struct ehci_qh		*qh;
+
+	hcd = bus_to_hcd(buf->bus);
+	ehci = hcd_to_ehci(hcd);
+	next = buf->output_buf;
+	size = buf->alloc_size;
+
+	*next = 0;
+
+	/*
+	 * dumps a snapshot of the async schedule.
+	 * usually empty except for long-term bulk reads, or head.
+	 * one QH per line, and TDs we know about
+	 */
+	spin_lock_irqsave(&ehci->lock, flags);
+	for (qh = ehci->async->qh_next.qh; size > 0 && qh; qh = qh->qh_next.qh)
+		qh_lines(ehci, qh, &next, &size);
+	if (!list_empty(&ehci->async_unlink) && size > 0) {
+		temp = scnprintf(next, size, "\nunlink =\n");
+		size -= temp;
+		next += temp;
+
+		list_for_each_entry(qh, &ehci->async_unlink, unlink_node) {
+			if (size <= 0)
+				break;
+			qh_lines(ehci, qh, &next, &size);
+		}
+	}
+	spin_unlock_irqrestore(&ehci->lock, flags);
+
+	return strlen(buf->output_buf);
+}
+
+static ssize_t fill_bandwidth_buffer(struct debug_buffer *buf)
+{
+	struct ehci_hcd		*ehci;
+	struct ehci_tt		*tt;
+	struct ehci_per_sched	*ps;
+	unsigned		temp, size;
+	char			*next;
+	unsigned		i;
+	u8			*bw;
+	u16			*bf;
+	u8			budget[EHCI_BANDWIDTH_SIZE];
+
+	ehci = hcd_to_ehci(bus_to_hcd(buf->bus));
+	next = buf->output_buf;
+	size = buf->alloc_size;
+
+	*next = 0;
+
+	spin_lock_irq(&ehci->lock);
+
+	/* Dump the HS bandwidth table */
+	temp = scnprintf(next, size,
+			"HS bandwidth allocation (us per microframe)\n");
+	size -= temp;
+	next += temp;
+	for (i = 0; i < EHCI_BANDWIDTH_SIZE; i += 8) {
+		bw = &ehci->bandwidth[i];
+		temp = scnprintf(next, size,
+				"%2u: %4u%4u%4u%4u%4u%4u%4u%4u\n",
+				i, bw[0], bw[1], bw[2], bw[3],
+					bw[4], bw[5], bw[6], bw[7]);
+		size -= temp;
+		next += temp;
+	}
+
+	/* Dump all the FS/LS tables */
+	list_for_each_entry(tt, &ehci->tt_list, tt_list) {
+		temp = scnprintf(next, size,
+				"\nTT %s port %d  FS/LS bandwidth allocation (us per frame)\n",
+				dev_name(&tt->usb_tt->hub->dev),
+				tt->tt_port + !!tt->usb_tt->multi);
+		size -= temp;
+		next += temp;
+
+		bf = tt->bandwidth;
+		temp = scnprintf(next, size,
+				"  %5u%5u%5u%5u%5u%5u%5u%5u\n",
+				bf[0], bf[1], bf[2], bf[3],
+					bf[4], bf[5], bf[6], bf[7]);
+		size -= temp;
+		next += temp;
+
+		temp = scnprintf(next, size,
+				"FS/LS budget (us per microframe)\n");
+		size -= temp;
+		next += temp;
+		compute_tt_budget(budget, tt);
+		for (i = 0; i < EHCI_BANDWIDTH_SIZE; i += 8) {
+			bw = &budget[i];
+			temp = scnprintf(next, size,
+					"%2u: %4u%4u%4u%4u%4u%4u%4u%4u\n",
+					i, bw[0], bw[1], bw[2], bw[3],
+						bw[4], bw[5], bw[6], bw[7]);
+			size -= temp;
+			next += temp;
+		}
+		list_for_each_entry(ps, &tt->ps_list, ps_list) {
+			temp = scnprintf(next, size,
+					"%s ep %02x:  %4u @ %2u.%u+%u mask %04x\n",
+					dev_name(&ps->udev->dev),
+					ps->ep->desc.bEndpointAddress,
+					ps->tt_usecs,
+					ps->bw_phase, ps->phase_uf,
+					ps->bw_period, ps->cs_mask);
+			size -= temp;
+			next += temp;
+		}
+	}
+	spin_unlock_irq(&ehci->lock);
+
+	return next - buf->output_buf;
+}
+
+static unsigned output_buf_tds_dir(char *buf, struct ehci_hcd *ehci,
+		struct ehci_qh_hw *hw, struct ehci_qh *qh, unsigned size)
+{
+	u32			scratch = hc32_to_cpup(ehci, &hw->hw_info1);
+	struct ehci_qtd		*qtd;
+	char			*type = "";
+	unsigned		temp = 0;
+
+	/* count tds, get ep direction */
+	list_for_each_entry(qtd, &qh->qtd_list, qtd_list) {
+		temp++;
+		switch ((hc32_to_cpu(ehci, qtd->hw_token) >> 8)	& 0x03) {
+		case 0:
+			type = "out";
+			continue;
+		case 1:
+			type = "in";
+			continue;
+		}
+	}
+
+	return scnprintf(buf, size, " (%c%d ep%d%s [%d/%d] q%d p%d)",
+			speed_char(scratch), scratch & 0x007f,
+			(scratch >> 8) & 0x000f, type, qh->ps.usecs,
+			qh->ps.c_usecs, temp, 0x7ff & (scratch >> 16));
+}
+
+#define DBG_SCHED_LIMIT 64
+static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
+{
+	struct usb_hcd		*hcd;
+	struct ehci_hcd		*ehci;
+	unsigned long		flags;
+	union ehci_shadow	p, *seen;
+	unsigned		temp, size, seen_count;
+	char			*next;
+	unsigned		i;
+	__hc32			tag;
+
+	seen = kmalloc_array(DBG_SCHED_LIMIT, sizeof(*seen), GFP_ATOMIC);
+	if (!seen)
+		return 0;
+	seen_count = 0;
+
+	hcd = bus_to_hcd(buf->bus);
+	ehci = hcd_to_ehci(hcd);
+	next = buf->output_buf;
+	size = buf->alloc_size;
+
+	temp = scnprintf(next, size, "size = %d\n", ehci->periodic_size);
+	size -= temp;
+	next += temp;
+
+	/*
+	 * dump a snapshot of the periodic schedule.
+	 * iso changes, interrupt usually doesn't.
+	 */
+	spin_lock_irqsave(&ehci->lock, flags);
+	for (i = 0; i < ehci->periodic_size; i++) {
+		p = ehci->pshadow[i];
+		if (likely(!p.ptr))
+			continue;
+		tag = Q_NEXT_TYPE(ehci, ehci->periodic[i]);
+
+		temp = scnprintf(next, size, "%4d: ", i);
+		size -= temp;
+		next += temp;
+
+		do {
+			struct ehci_qh_hw *hw;
+
+			switch (hc32_to_cpu(ehci, tag)) {
+			case Q_TYPE_QH:
+				hw = p.qh->hw;
+				temp = scnprintf(next, size, " qh%d-%04x/%p",
+						p.qh->ps.period,
+						hc32_to_cpup(ehci,
+							&hw->hw_info2)
+							/* uframe masks */
+							& (QH_CMASK | QH_SMASK),
+						p.qh);
+				size -= temp;
+				next += temp;
+				/* don't repeat what follows this qh */
+				for (temp = 0; temp < seen_count; temp++) {
+					if (seen[temp].ptr != p.ptr)
+						continue;
+					if (p.qh->qh_next.ptr) {
+						temp = scnprintf(next, size,
+							" ...");
+						size -= temp;
+						next += temp;
+					}
+					break;
+				}
+				/* show more info the first time around */
+				if (temp == seen_count) {
+					temp = output_buf_tds_dir(next, ehci,
+						hw, p.qh, size);
+
+					if (seen_count < DBG_SCHED_LIMIT)
+						seen[seen_count++].qh = p.qh;
+				} else {
+					temp = 0;
+				}
+				tag = Q_NEXT_TYPE(ehci, hw->hw_next);
+				p = p.qh->qh_next;
+				break;
+			case Q_TYPE_FSTN:
+				temp = scnprintf(next, size,
+					" fstn-%8x/%p", p.fstn->hw_prev,
+					p.fstn);
+				tag = Q_NEXT_TYPE(ehci, p.fstn->hw_next);
+				p = p.fstn->fstn_next;
+				break;
+			case Q_TYPE_ITD:
+				temp = scnprintf(next, size,
+					" itd/%p", p.itd);
+				tag = Q_NEXT_TYPE(ehci, p.itd->hw_next);
+				p = p.itd->itd_next;
+				break;
+			case Q_TYPE_SITD:
+				temp = scnprintf(next, size,
+					" sitd%d-%04x/%p",
+					p.sitd->stream->ps.period,
+					hc32_to_cpup(ehci, &p.sitd->hw_uframe)
+						& 0x0000ffff,
+					p.sitd);
+				tag = Q_NEXT_TYPE(ehci, p.sitd->hw_next);
+				p = p.sitd->sitd_next;
+				break;
+			}
+			size -= temp;
+			next += temp;
+		} while (p.ptr);
+
+		temp = scnprintf(next, size, "\n");
+		size -= temp;
+		next += temp;
+	}
+	spin_unlock_irqrestore(&ehci->lock, flags);
+	kfree(seen);
+
+	return buf->alloc_size - size;
+}
+#undef DBG_SCHED_LIMIT
+
+static const char *rh_state_string(struct ehci_hcd *ehci)
+{
+	switch (ehci->rh_state) {
+	case EHCI_RH_HALTED:
+		return "halted";
+	case EHCI_RH_SUSPENDED:
+		return "suspended";
+	case EHCI_RH_RUNNING:
+		return "running";
+	case EHCI_RH_STOPPING:
+		return "stopping";
+	}
+	return "?";
+}
+
+static ssize_t fill_registers_buffer(struct debug_buffer *buf)
+{
+	struct usb_hcd		*hcd;
+	struct ehci_hcd		*ehci;
+	unsigned long		flags;
+	unsigned		temp, size, i;
+	char			*next, scratch[80];
+	static char		fmt[] = "%*s\n";
+	static char		label[] = "";
+
+	hcd = bus_to_hcd(buf->bus);
+	ehci = hcd_to_ehci(hcd);
+	next = buf->output_buf;
+	size = buf->alloc_size;
+
+	spin_lock_irqsave(&ehci->lock, flags);
+
+	if (!HCD_HW_ACCESSIBLE(hcd)) {
+		size = scnprintf(next, size,
+			"bus %s, device %s\n"
+			"%s\n"
+			"SUSPENDED (no register access)\n",
+			hcd->self.controller->bus->name,
+			dev_name(hcd->self.controller),
+			hcd->product_desc);
+		goto done;
+	}
+
+	/* Capability Registers */
+	i = HC_VERSION(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
+	temp = scnprintf(next, size,
+		"bus %s, device %s\n"
+		"%s\n"
+		"EHCI %x.%02x, rh state %s\n",
+		hcd->self.controller->bus->name,
+		dev_name(hcd->self.controller),
+		hcd->product_desc,
+		i >> 8, i & 0x0ff, rh_state_string(ehci));
+	size -= temp;
+	next += temp;
+
+#ifdef	CONFIG_USB_PCI
+	/* EHCI 0.96 and later may have "extended capabilities" */
+	if (dev_is_pci(hcd->self.controller)) {
+		struct pci_dev	*pdev;
+		u32		offset, cap, cap2;
+		unsigned	count = 256 / 4;
+
+		pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
+		offset = HCC_EXT_CAPS(ehci_readl(ehci,
+				&ehci->caps->hcc_params));
+		while (offset && count--) {
+			pci_read_config_dword(pdev, offset, &cap);
+			switch (cap & 0xff) {
+			case 1:
+				temp = scnprintf(next, size,
+					"ownership %08x%s%s\n", cap,
+					(cap & (1 << 24)) ? " linux" : "",
+					(cap & (1 << 16)) ? " firmware" : "");
+				size -= temp;
+				next += temp;
+
+				offset += 4;
+				pci_read_config_dword(pdev, offset, &cap2);
+				temp = scnprintf(next, size,
+					"SMI sts/enable 0x%08x\n", cap2);
+				size -= temp;
+				next += temp;
+				break;
+			case 0:		/* illegal reserved capability */
+				cap = 0;
+				fallthrough;
+			default:		/* unknown */
+				break;
+			}
+			offset = (cap >> 8) & 0xff;
+		}
+	}
+#endif
+
+	/* FIXME interpret both types of params */
+	i = ehci_readl(ehci, &ehci->caps->hcs_params);
+	temp = scnprintf(next, size, "structural params 0x%08x\n", i);
+	size -= temp;
+	next += temp;
+
+	i = ehci_readl(ehci, &ehci->caps->hcc_params);
+	temp = scnprintf(next, size, "capability params 0x%08x\n", i);
+	size -= temp;
+	next += temp;
+
+	/* Operational Registers */
+	temp = dbg_status_buf(scratch, sizeof(scratch), label,
+			ehci_readl(ehci, &ehci->regs->status));
+	temp = scnprintf(next, size, fmt, temp, scratch);
+	size -= temp;
+	next += temp;
+
+	temp = dbg_command_buf(scratch, sizeof(scratch), label,
+			ehci_readl(ehci, &ehci->regs->command));
+	temp = scnprintf(next, size, fmt, temp, scratch);
+	size -= temp;
+	next += temp;
+
+	temp = dbg_intr_buf(scratch, sizeof(scratch), label,
+			ehci_readl(ehci, &ehci->regs->intr_enable));
+	temp = scnprintf(next, size, fmt, temp, scratch);
+	size -= temp;
+	next += temp;
+
+	temp = scnprintf(next, size, "uframe %04x\n",
+			ehci_read_frame_index(ehci));
+	size -= temp;
+	next += temp;
+
+	for (i = 1; i <= HCS_N_PORTS(ehci->hcs_params); i++) {
+		temp = dbg_port_buf(scratch, sizeof(scratch), label, i,
+				ehci_readl(ehci,
+					&ehci->regs->port_status[i - 1]));
+		temp = scnprintf(next, size, fmt, temp, scratch);
+		size -= temp;
+		next += temp;
+		if (i == HCS_DEBUG_PORT(ehci->hcs_params) && ehci->debug) {
+			temp = scnprintf(next, size,
+					"    debug control %08x\n",
+					ehci_readl(ehci,
+						&ehci->debug->control));
+			size -= temp;
+			next += temp;
+		}
+	}
+
+	if (!list_empty(&ehci->async_unlink)) {
+		temp = scnprintf(next, size, "async unlink qh %p\n",
+				list_first_entry(&ehci->async_unlink,
+						struct ehci_qh, unlink_node));
+		size -= temp;
+		next += temp;
+	}
+
+#ifdef EHCI_STATS
+	temp = scnprintf(next, size,
+		"irq normal %ld err %ld iaa %ld (lost %ld)\n",
+		ehci->stats.normal, ehci->stats.error, ehci->stats.iaa,
+		ehci->stats.lost_iaa);
+	size -= temp;
+	next += temp;
+
+	temp = scnprintf(next, size, "complete %ld unlink %ld\n",
+		ehci->stats.complete, ehci->stats.unlink);
+	size -= temp;
+	next += temp;
+#endif
+
+done:
+	spin_unlock_irqrestore(&ehci->lock, flags);
+
+	return buf->alloc_size - size;
+}
+
+static struct debug_buffer *alloc_buffer(struct usb_bus *bus,
+		ssize_t (*fill_func)(struct debug_buffer *))
+{
+	struct debug_buffer *buf;
+
+	buf = kzalloc(sizeof(*buf), GFP_KERNEL);
+
+	if (buf) {
+		buf->bus = bus;
+		buf->fill_func = fill_func;
+		mutex_init(&buf->mutex);
+		buf->alloc_size = PAGE_SIZE;
+	}
+
+	return buf;
+}
+
+static int fill_buffer(struct debug_buffer *buf)
+{
+	int ret;
+
+	if (!buf->output_buf)
+		buf->output_buf = vmalloc(buf->alloc_size);
+
+	if (!buf->output_buf) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = buf->fill_func(buf);
+
+	if (ret >= 0) {
+		buf->count = ret;
+		ret = 0;
+	}
+
+out:
+	return ret;
+}
+
+static ssize_t debug_output(struct file *file, char __user *user_buf,
+		size_t len, loff_t *offset)
+{
+	struct debug_buffer *buf = file->private_data;
+	int ret;
+
+	mutex_lock(&buf->mutex);
+	if (buf->count == 0) {
+		ret = fill_buffer(buf);
+		if (ret != 0) {
+			mutex_unlock(&buf->mutex);
+			goto out;
+		}
+	}
+	mutex_unlock(&buf->mutex);
+
+	ret = simple_read_from_buffer(user_buf, len, offset,
+				      buf->output_buf, buf->count);
+
+out:
+	return ret;
+}
+
+static int debug_close(struct inode *inode, struct file *file)
+{
+	struct debug_buffer *buf = file->private_data;
+
+	if (buf) {
+		vfree(buf->output_buf);
+		kfree(buf);
+	}
+
+	return 0;
+}
+
+static int debug_async_open(struct inode *inode, struct file *file)
+{
+	file->private_data = alloc_buffer(inode->i_private, fill_async_buffer);
+
+	return file->private_data ? 0 : -ENOMEM;
+}
+
+static int debug_bandwidth_open(struct inode *inode, struct file *file)
+{
+	file->private_data = alloc_buffer(inode->i_private,
+			fill_bandwidth_buffer);
+
+	return file->private_data ? 0 : -ENOMEM;
+}
+
+static int debug_periodic_open(struct inode *inode, struct file *file)
+{
+	struct debug_buffer *buf;
+
+	buf = alloc_buffer(inode->i_private, fill_periodic_buffer);
+	if (!buf)
+		return -ENOMEM;
+
+	buf->alloc_size = (sizeof(void *) == 4 ? 6 : 8) * PAGE_SIZE;
+	file->private_data = buf;
+	return 0;
+}
+
+static int debug_registers_open(struct inode *inode, struct file *file)
+{
+	file->private_data = alloc_buffer(inode->i_private,
+					  fill_registers_buffer);
+
+	return file->private_data ? 0 : -ENOMEM;
+}
+
+static inline void create_debug_files(struct ehci_hcd *ehci)
+{
+	struct usb_bus *bus = &ehci_to_hcd(ehci)->self;
+
+	ehci->debug_dir = debugfs_create_dir(bus->bus_name, ehci_debug_root);
+
+	debugfs_create_file("async", S_IRUGO, ehci->debug_dir, bus,
+			    &debug_async_fops);
+	debugfs_create_file("bandwidth", S_IRUGO, ehci->debug_dir, bus,
+			    &debug_bandwidth_fops);
+	debugfs_create_file("periodic", S_IRUGO, ehci->debug_dir, bus,
+			    &debug_periodic_fops);
+	debugfs_create_file("registers", S_IRUGO, ehci->debug_dir, bus,
+			    &debug_registers_fops);
+}
+
+static inline void remove_debug_files(struct ehci_hcd *ehci)
+{
+	debugfs_remove_recursive(ehci->debug_dir);
+}
+
+#else /* CONFIG_DYNAMIC_DEBUG */
+
+static inline void dbg_hcs_params(struct ehci_hcd *ehci, char *label) { }
+static inline void dbg_hcc_params(struct ehci_hcd *ehci, char *label) { }
+
+static inline void __maybe_unused dbg_qh(const char *label,
+		struct ehci_hcd *ehci, struct ehci_qh *qh) { }
+
+static inline int __maybe_unused dbg_status_buf(const char *buf,
+		unsigned int len, const char *label, u32 status)
+{ return 0; }
+
+static inline int __maybe_unused dbg_command_buf(const char *buf,
+		unsigned int len, const char *label, u32 command)
+{ return 0; }
+
+static inline int __maybe_unused dbg_intr_buf(const char *buf,
+		unsigned int len, const char *label, u32 enable)
+{ return 0; }
+
+static inline int __maybe_unused dbg_port_buf(char *buf,
+		unsigned int len, const char *label, int port, u32 status)
+{ return 0; }
+
+static inline void dbg_status(struct ehci_hcd *ehci, const char *label,
+		u32 status) { }
+static inline void dbg_cmd(struct ehci_hcd *ehci, const char *label,
+		u32 command) { }
+static inline void dbg_port(struct ehci_hcd *ehci, const char *label,
+		int port, u32 status) { }
+
+static inline void create_debug_files(struct ehci_hcd *bus) { }
+static inline void remove_debug_files(struct ehci_hcd *bus) { }
+
+#endif /* CONFIG_DYNAMIC_DEBUG */
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
new file mode 100644
index 000000000..a33323161
--- /dev/null
+++ b/drivers/usb/host/ehci-exynos.c
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Samsung Exynos USB HOST EHCI Controller
+ *
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/gpio/consumer.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ehci.h"
+
+#define DRIVER_DESC "EHCI Exynos driver"
+
+#define EHCI_INSNREG00(base)			(base + 0x90)
+#define EHCI_INSNREG00_ENA_INCR16		(0x1 << 25)
+#define EHCI_INSNREG00_ENA_INCR8		(0x1 << 24)
+#define EHCI_INSNREG00_ENA_INCR4		(0x1 << 23)
+#define EHCI_INSNREG00_ENA_INCRX_ALIGN		(0x1 << 22)
+#define EHCI_INSNREG00_ENABLE_DMA_BURST	\
+	(EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 |	\
+	 EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN)
+
+static struct hc_driver __read_mostly exynos_ehci_hc_driver;
+
+#define PHY_NUMBER 3
+
+struct exynos_ehci_hcd {
+	struct clk *clk;
+	struct device_node *of_node;
+	struct phy *phy[PHY_NUMBER];
+	bool legacy_phy;
+};
+
+#define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv)
+
+static int exynos_ehci_get_phy(struct device *dev,
+				struct exynos_ehci_hcd *exynos_ehci)
+{
+	struct device_node *child;
+	struct phy *phy;
+	int phy_number, num_phys;
+	int ret;
+
+	/* Get PHYs for the controller */
+	num_phys = of_count_phandle_with_args(dev->of_node, "phys",
+					      "#phy-cells");
+	for (phy_number = 0; phy_number < num_phys; phy_number++) {
+		phy = devm_of_phy_get_by_index(dev, dev->of_node, phy_number);
+		if (IS_ERR(phy))
+			return PTR_ERR(phy);
+		exynos_ehci->phy[phy_number] = phy;
+	}
+	if (num_phys > 0)
+		return 0;
+
+	/* Get PHYs using legacy bindings */
+	for_each_available_child_of_node(dev->of_node, child) {
+		ret = of_property_read_u32(child, "reg", &phy_number);
+		if (ret) {
+			dev_err(dev, "Failed to parse device tree\n");
+			of_node_put(child);
+			return ret;
+		}
+
+		if (phy_number >= PHY_NUMBER) {
+			dev_err(dev, "Invalid number of PHYs\n");
+			of_node_put(child);
+			return -EINVAL;
+		}
+
+		phy = devm_of_phy_get(dev, child, NULL);
+		exynos_ehci->phy[phy_number] = phy;
+		if (IS_ERR(phy)) {
+			ret = PTR_ERR(phy);
+			if (ret == -EPROBE_DEFER) {
+				of_node_put(child);
+				return ret;
+			} else if (ret != -ENOSYS && ret != -ENODEV) {
+				dev_err(dev,
+					"Error retrieving usb2 phy: %d\n", ret);
+				of_node_put(child);
+				return ret;
+			}
+		}
+	}
+
+	exynos_ehci->legacy_phy = true;
+	return 0;
+}
+
+static int exynos_ehci_phy_enable(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
+	int i;
+	int ret = 0;
+
+	for (i = 0; ret == 0 && i < PHY_NUMBER; i++)
+		if (!IS_ERR(exynos_ehci->phy[i]))
+			ret = phy_power_on(exynos_ehci->phy[i]);
+	if (ret)
+		for (i--; i >= 0; i--)
+			if (!IS_ERR(exynos_ehci->phy[i]))
+				phy_power_off(exynos_ehci->phy[i]);
+
+	return ret;
+}
+
+static void exynos_ehci_phy_disable(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
+	int i;
+
+	for (i = 0; i < PHY_NUMBER; i++)
+		if (!IS_ERR(exynos_ehci->phy[i]))
+			phy_power_off(exynos_ehci->phy[i]);
+}
+
+static void exynos_setup_vbus_gpio(struct device *dev)
+{
+	struct gpio_desc *gpio;
+	int err;
+
+	gpio = devm_gpiod_get_optional(dev, "samsung,vbus", GPIOD_OUT_HIGH);
+	err = PTR_ERR_OR_ZERO(gpio);
+	if (err)
+		dev_err(dev, "can't request ehci vbus gpio: %d\n", err);
+}
+
+static int exynos_ehci_probe(struct platform_device *pdev)
+{
+	struct exynos_ehci_hcd *exynos_ehci;
+	struct usb_hcd *hcd;
+	struct ehci_hcd *ehci;
+	struct resource *res;
+	int irq;
+	int err;
+
+	/*
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we move to full device tree support this will vanish off.
+	 */
+	err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (err)
+		return err;
+
+	exynos_setup_vbus_gpio(&pdev->dev);
+
+	hcd = usb_create_hcd(&exynos_ehci_hc_driver,
+			     &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		dev_err(&pdev->dev, "Unable to create HCD\n");
+		return -ENOMEM;
+	}
+	exynos_ehci = to_exynos_ehci(hcd);
+
+	err = exynos_ehci_get_phy(&pdev->dev, exynos_ehci);
+	if (err)
+		goto fail_clk;
+
+	exynos_ehci->clk = devm_clk_get(&pdev->dev, "usbhost");
+
+	if (IS_ERR(exynos_ehci->clk)) {
+		dev_err(&pdev->dev, "Failed to get usbhost clock\n");
+		err = PTR_ERR(exynos_ehci->clk);
+		goto fail_clk;
+	}
+
+	err = clk_prepare_enable(exynos_ehci->clk);
+	if (err)
+		goto fail_clk;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(hcd->regs)) {
+		err = PTR_ERR(hcd->regs);
+		goto fail_io;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		err = irq;
+		goto fail_io;
+	}
+
+	err = exynos_ehci_phy_enable(&pdev->dev);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to enable USB phy\n");
+		goto fail_io;
+	}
+
+	ehci = hcd_to_ehci(hcd);
+	ehci->caps = hcd->regs;
+
+	/*
+	 * Workaround: reset of_node pointer to avoid conflict between legacy
+	 * Exynos EHCI port subnodes and generic USB device bindings
+	 */
+	exynos_ehci->of_node = pdev->dev.of_node;
+	if (exynos_ehci->legacy_phy)
+		pdev->dev.of_node = NULL;
+
+	/* DMA burst Enable */
+	writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
+
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to add USB HCD\n");
+		goto fail_add_hcd;
+	}
+	device_wakeup_enable(hcd->self.controller);
+
+	platform_set_drvdata(pdev, hcd);
+
+	return 0;
+
+fail_add_hcd:
+	exynos_ehci_phy_disable(&pdev->dev);
+	pdev->dev.of_node = exynos_ehci->of_node;
+fail_io:
+	clk_disable_unprepare(exynos_ehci->clk);
+fail_clk:
+	usb_put_hcd(hcd);
+	return err;
+}
+
+static int exynos_ehci_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
+
+	pdev->dev.of_node = exynos_ehci->of_node;
+
+	usb_remove_hcd(hcd);
+
+	exynos_ehci_phy_disable(&pdev->dev);
+
+	clk_disable_unprepare(exynos_ehci->clk);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int exynos_ehci_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
+
+	bool do_wakeup = device_may_wakeup(dev);
+	int rc;
+
+	rc = ehci_suspend(hcd, do_wakeup);
+	if (rc)
+		return rc;
+
+	exynos_ehci_phy_disable(dev);
+
+	clk_disable_unprepare(exynos_ehci->clk);
+
+	return rc;
+}
+
+static int exynos_ehci_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
+	int ret;
+
+	ret = clk_prepare_enable(exynos_ehci->clk);
+	if (ret)
+		return ret;
+
+	ret = exynos_ehci_phy_enable(dev);
+	if (ret) {
+		dev_err(dev, "Failed to enable USB phy\n");
+		clk_disable_unprepare(exynos_ehci->clk);
+		return ret;
+	}
+
+	/* DMA burst Enable */
+	writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
+
+	ehci_resume(hcd, false);
+	return 0;
+}
+#else
+#define exynos_ehci_suspend	NULL
+#define exynos_ehci_resume	NULL
+#endif
+
+static const struct dev_pm_ops exynos_ehci_pm_ops = {
+	.suspend	= exynos_ehci_suspend,
+	.resume		= exynos_ehci_resume,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id exynos_ehci_match[] = {
+	{ .compatible = "samsung,exynos4210-ehci" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, exynos_ehci_match);
+#endif
+
+static struct platform_driver exynos_ehci_driver = {
+	.probe		= exynos_ehci_probe,
+	.remove		= exynos_ehci_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver = {
+		.name	= "exynos-ehci",
+		.pm	= &exynos_ehci_pm_ops,
+		.of_match_table = of_match_ptr(exynos_ehci_match),
+	}
+};
+static const struct ehci_driver_overrides exynos_overrides __initconst = {
+	.extra_priv_size = sizeof(struct exynos_ehci_hcd),
+};
+
+static int __init ehci_exynos_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ehci_init_driver(&exynos_ehci_hc_driver, &exynos_overrides);
+	return platform_driver_register(&exynos_ehci_driver);
+}
+module_init(ehci_exynos_init);
+
+static void __exit ehci_exynos_cleanup(void)
+{
+	platform_driver_unregister(&exynos_ehci_driver);
+}
+module_exit(ehci_exynos_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_ALIAS("platform:exynos-ehci");
+MODULE_AUTHOR("Jingoo Han");
+MODULE_AUTHOR("Joonyoung Shim");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
new file mode 100644
index 000000000..38d06e5ab
--- /dev/null
+++ b/drivers/usb/host/ehci-fsl.c
@@ -0,0 +1,744 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2005-2009 MontaVista Software, Inc.
+ * Copyright 2008,2012,2015      Freescale Semiconductor, Inc.
+ *
+ * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
+ * by Hunter Wu.
+ * Power Management support by Dave Liu <daveliu@freescale.com>,
+ * Jerry Huang <Chang-Ming.Huang@freescale.com> and
+ * Anton Vorontsov <avorontsov@ru.mvista.com>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/err.h>
+#include <linux/usb.h>
+#include <linux/usb/ehci_def.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+
+#include "ehci.h"
+#include "ehci-fsl.h"
+
+#define DRIVER_DESC "Freescale EHCI Host controller driver"
+#define DRV_NAME "fsl-ehci"
+
+static struct hc_driver __read_mostly fsl_ehci_hc_driver;
+
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
+
+/*
+ * fsl_ehci_drv_probe - initialize FSL-based HCDs
+ * @pdev: USB Host Controller being probed
+ *
+ * Context: task context, might sleep
+ *
+ * Allocates basic resources for this USB host controller.
+ */
+static int fsl_ehci_drv_probe(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata;
+	struct usb_hcd *hcd;
+	struct resource *res;
+	int irq;
+	int retval;
+	u32 tmp;
+
+	pr_debug("initializing FSL-SOC USB Controller\n");
+
+	/* Need platform data for setup */
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev,
+			"No platform data for %s.\n", dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+
+	/*
+	 * This is a host mode driver, verify that we're supposed to be
+	 * in host mode.
+	 */
+	if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
+	      (pdata->operating_mode == FSL_USB2_MPH_HOST) ||
+	      (pdata->operating_mode == FSL_USB2_DR_OTG))) {
+		dev_err(&pdev->dev,
+			"Non Host Mode configured for %s. Wrong driver linked.\n",
+			dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	hcd = __usb_create_hcd(&fsl_ehci_hc_driver, pdev->dev.parent,
+			       &pdev->dev, dev_name(&pdev->dev), NULL);
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err1;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(hcd->regs)) {
+		retval = PTR_ERR(hcd->regs);
+		goto err2;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	pdata->regs = hcd->regs;
+
+	if (pdata->power_budget)
+		hcd->power_budget = pdata->power_budget;
+
+	/*
+	 * do platform specific init: check the clock, grab/config pins, etc.
+	 */
+	if (pdata->init && pdata->init(pdev)) {
+		retval = -ENODEV;
+		goto err2;
+	}
+
+	/* Enable USB controller, 83xx or 8536 */
+	if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6) {
+		tmp = ioread32be(hcd->regs + FSL_SOC_USB_CTRL);
+		tmp &= ~CONTROL_REGISTER_W1C_MASK;
+		tmp |= 0x4;
+		iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL);
+	}
+
+	/* Set USB_EN bit to select ULPI phy for USB controller version 2.5 */
+	if (pdata->controller_ver == FSL_USB_VER_2_5 &&
+	    pdata->phy_mode == FSL_USB2_PHY_ULPI)
+		iowrite32be(USB_CTRL_USB_EN, hcd->regs + FSL_SOC_USB_CTRL);
+
+	/*
+	 * Enable UTMI phy and program PTS field in UTMI mode before asserting
+	 * controller reset for USB Controller version 2.5
+	 */
+	if (pdata->has_fsl_erratum_a007792) {
+		tmp = ioread32be(hcd->regs + FSL_SOC_USB_CTRL);
+		tmp &= ~CONTROL_REGISTER_W1C_MASK;
+		tmp |= CTRL_UTMI_PHY_EN;
+		iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL);
+
+		writel(PORT_PTS_UTMI, hcd->regs + FSL_SOC_USB_PORTSC1);
+	}
+
+	/* Don't need to set host mode here. It will be done by tdi_reset() */
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval != 0)
+		goto err2;
+	device_wakeup_enable(hcd->self.controller);
+
+#ifdef CONFIG_USB_OTG
+	if (pdata->operating_mode == FSL_USB2_DR_OTG) {
+		struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+		hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
+		dev_dbg(&pdev->dev, "hcd=0x%p  ehci=0x%p, phy=0x%p\n",
+			hcd, ehci, hcd->usb_phy);
+
+		if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
+			retval = otg_set_host(hcd->usb_phy->otg,
+					      &ehci_to_hcd(ehci)->self);
+			if (retval) {
+				usb_put_phy(hcd->usb_phy);
+				goto err2;
+			}
+		} else {
+			dev_err(&pdev->dev, "can't find phy\n");
+			retval = -ENODEV;
+			goto err2;
+		}
+
+		hcd->skip_phy_initialization = 1;
+	}
+#endif
+	return retval;
+
+      err2:
+	usb_put_hcd(hcd);
+      err1:
+	dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
+	if (pdata->exit)
+		pdata->exit(pdev);
+	return retval;
+}
+
+static bool usb_phy_clk_valid(struct usb_hcd *hcd)
+{
+	void __iomem *non_ehci = hcd->regs;
+	bool ret = true;
+
+	if (!(ioread32be(non_ehci + FSL_SOC_USB_CTRL) & PHY_CLK_VALID))
+		ret = false;
+
+	return ret;
+}
+
+static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
+			       enum fsl_usb2_phy_modes phy_mode,
+			       unsigned int port_offset)
+{
+	u32 portsc, tmp;
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	void __iomem *non_ehci = hcd->regs;
+	struct device *dev = hcd->self.controller;
+	struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
+
+	if (pdata->controller_ver < 0) {
+		dev_warn(hcd->self.controller, "Could not get controller version\n");
+		return -ENODEV;
+	}
+
+	portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
+	portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
+
+	switch (phy_mode) {
+	case FSL_USB2_PHY_ULPI:
+		if (pdata->have_sysif_regs && pdata->controller_ver) {
+			/* controller version 1.6 or above */
+			/* turn off UTMI PHY first */
+			tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+			tmp &= ~(CONTROL_REGISTER_W1C_MASK | UTMI_PHY_EN);
+			iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
+
+			/* then turn on ULPI and enable USB controller */
+			tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+			tmp &= ~CONTROL_REGISTER_W1C_MASK;
+			tmp |= ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN;
+			iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
+		}
+		portsc |= PORT_PTS_ULPI;
+		break;
+	case FSL_USB2_PHY_SERIAL:
+		portsc |= PORT_PTS_SERIAL;
+		break;
+	case FSL_USB2_PHY_UTMI_WIDE:
+		portsc |= PORT_PTS_PTW;
+		fallthrough;
+	case FSL_USB2_PHY_UTMI:
+		/* Presence of this node "has_fsl_erratum_a006918"
+		 * in device-tree is used to stop USB controller
+		 * initialization in Linux
+		 */
+		if (pdata->has_fsl_erratum_a006918) {
+			dev_warn(dev, "USB PHY clock invalid\n");
+			return -EINVAL;
+		}
+		fallthrough;
+	case FSL_USB2_PHY_UTMI_DUAL:
+		/* PHY_CLK_VALID bit is de-featured from all controller
+		 * versions below 2.4 and is to be checked only for
+		 * internal UTMI phy
+		 */
+		if (pdata->controller_ver > FSL_USB_VER_2_4 &&
+		    pdata->have_sysif_regs && !usb_phy_clk_valid(hcd)) {
+			dev_err(dev, "USB PHY clock invalid\n");
+			return -EINVAL;
+		}
+
+		if (pdata->have_sysif_regs && pdata->controller_ver) {
+			/* controller version 1.6 or above */
+			tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+			tmp &= ~CONTROL_REGISTER_W1C_MASK;
+			tmp |= UTMI_PHY_EN;
+			iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
+
+			mdelay(FSL_UTMI_PHY_DLY);  /* Delay for UTMI PHY CLK to
+						become stable - 10ms*/
+		}
+		/* enable UTMI PHY */
+		if (pdata->have_sysif_regs) {
+			tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+			tmp &= ~CONTROL_REGISTER_W1C_MASK;
+			tmp |= CTRL_UTMI_PHY_EN;
+			iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
+		}
+		portsc |= PORT_PTS_UTMI;
+		break;
+	case FSL_USB2_PHY_NONE:
+		break;
+	}
+
+	if (pdata->have_sysif_regs &&
+	    pdata->controller_ver > FSL_USB_VER_1_6 &&
+	    !usb_phy_clk_valid(hcd)) {
+		dev_warn(hcd->self.controller, "USB PHY clock invalid\n");
+		return -EINVAL;
+	}
+
+	ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
+
+	if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs) {
+		tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+		tmp &= ~CONTROL_REGISTER_W1C_MASK;
+		tmp |= USB_CTRL_USB_EN;
+		iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
+	}
+
+	return 0;
+}
+
+static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
+{
+	struct usb_hcd *hcd = ehci_to_hcd(ehci);
+	struct fsl_usb2_platform_data *pdata;
+	void __iomem *non_ehci = hcd->regs;
+
+	pdata = dev_get_platdata(hcd->self.controller);
+
+	if (pdata->have_sysif_regs) {
+		/*
+		* Turn on cache snooping hardware, since some PowerPC platforms
+		* wholly rely on hardware to deal with cache coherent
+		*/
+
+		/* Setup Snooping for all the 4GB space */
+		/* SNOOP1 starts from 0x0, size 2G */
+		iowrite32be(0x0 | SNOOP_SIZE_2GB,
+			    non_ehci + FSL_SOC_USB_SNOOP1);
+		/* SNOOP2 starts from 0x80000000, size 2G */
+		iowrite32be(0x80000000 | SNOOP_SIZE_2GB,
+			    non_ehci + FSL_SOC_USB_SNOOP2);
+	}
+
+	/* Deal with USB erratum A-005275 */
+	if (pdata->has_fsl_erratum_a005275 == 1)
+		ehci->has_fsl_hs_errata = 1;
+
+	if (pdata->has_fsl_erratum_a005697 == 1)
+		ehci->has_fsl_susp_errata = 1;
+
+	if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
+			(pdata->operating_mode == FSL_USB2_DR_OTG))
+		if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
+			return -EINVAL;
+
+	if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
+
+		/* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
+		if (pdata->has_fsl_erratum_14 == 1)
+			ehci->has_fsl_port_bug = 1;
+
+		if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
+			if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
+				return -EINVAL;
+
+		if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
+			if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1))
+				return -EINVAL;
+	}
+
+	if (pdata->have_sysif_regs) {
+#ifdef CONFIG_FSL_SOC_BOOKE
+		iowrite32be(0x00000008, non_ehci + FSL_SOC_USB_PRICTRL);
+		iowrite32be(0x00000080, non_ehci + FSL_SOC_USB_AGECNTTHRSH);
+#else
+		iowrite32be(0x0000000c, non_ehci + FSL_SOC_USB_PRICTRL);
+		iowrite32be(0x00000040, non_ehci + FSL_SOC_USB_AGECNTTHRSH);
+#endif
+		iowrite32be(0x00000001, non_ehci + FSL_SOC_USB_SICTRL);
+	}
+
+	return 0;
+}
+
+/* called after powerup, by probe or system-pm "wakeup" */
+static int ehci_fsl_reinit(struct ehci_hcd *ehci)
+{
+	if (ehci_fsl_usb_setup(ehci))
+		return -EINVAL;
+
+	return 0;
+}
+
+/* called during probe() after chip reset completes */
+static int ehci_fsl_setup(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+	struct fsl_usb2_platform_data *pdata;
+	struct device *dev;
+
+	dev = hcd->self.controller;
+	pdata = dev_get_platdata(hcd->self.controller);
+	ehci->big_endian_desc = pdata->big_endian_desc;
+	ehci->big_endian_mmio = pdata->big_endian_mmio;
+
+	/* EHCI registers start at offset 0x100 */
+	ehci->caps = hcd->regs + 0x100;
+
+#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_85xx)
+	/*
+	 * Deal with MPC834X/85XX that need port power to be cycled
+	 * after the power fault condition is removed. Otherwise the
+	 * state machine does not reflect PORTSC[CSC] correctly.
+	 */
+	ehci->need_oc_pp_cycle = 1;
+#endif
+
+	hcd->has_tt = 1;
+
+	retval = ehci_setup(hcd);
+	if (retval)
+		return retval;
+
+	if (of_device_is_compatible(dev->parent->of_node,
+				    "fsl,mpc5121-usb2-dr")) {
+		/*
+		 * set SBUSCFG:AHBBRST so that control msgs don't
+		 * fail when doing heavy PATA writes.
+		 */
+		ehci_writel(ehci, SBUSCFG_INCR8,
+			    hcd->regs + FSL_SOC_USB_SBUSCFG);
+	}
+
+	retval = ehci_fsl_reinit(ehci);
+	return retval;
+}
+
+struct ehci_fsl {
+	struct ehci_hcd	ehci;
+
+#ifdef CONFIG_PM
+	/* Saved USB PHY settings, need to restore after deep sleep. */
+	u32 usb_ctrl;
+#endif
+};
+
+#ifdef CONFIG_PM
+
+#ifdef CONFIG_PPC_MPC512x
+static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
+	u32 tmp;
+
+#ifdef CONFIG_DYNAMIC_DEBUG
+	u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE);
+	mode &= USBMODE_CM_MASK;
+	tmp = ehci_readl(ehci, hcd->regs + 0x140);	/* usbcmd */
+
+	dev_dbg(dev, "suspend=%d already_suspended=%d "
+		"mode=%d  usbcmd %08x\n", pdata->suspended,
+		pdata->already_suspended, mode, tmp);
+#endif
+
+	/*
+	 * If the controller is already suspended, then this must be a
+	 * PM suspend.  Remember this fact, so that we will leave the
+	 * controller suspended at PM resume time.
+	 */
+	if (pdata->suspended) {
+		dev_dbg(dev, "already suspended, leaving early\n");
+		pdata->already_suspended = 1;
+		return 0;
+	}
+
+	dev_dbg(dev, "suspending...\n");
+
+	ehci->rh_state = EHCI_RH_SUSPENDED;
+	dev->power.power_state = PMSG_SUSPEND;
+
+	/* ignore non-host interrupts */
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	/* stop the controller */
+	tmp = ehci_readl(ehci, &ehci->regs->command);
+	tmp &= ~CMD_RUN;
+	ehci_writel(ehci, tmp, &ehci->regs->command);
+
+	/* save EHCI registers */
+	pdata->pm_command = ehci_readl(ehci, &ehci->regs->command);
+	pdata->pm_command &= ~CMD_RUN;
+	pdata->pm_status  = ehci_readl(ehci, &ehci->regs->status);
+	pdata->pm_intr_enable  = ehci_readl(ehci, &ehci->regs->intr_enable);
+	pdata->pm_frame_index  = ehci_readl(ehci, &ehci->regs->frame_index);
+	pdata->pm_segment  = ehci_readl(ehci, &ehci->regs->segment);
+	pdata->pm_frame_list  = ehci_readl(ehci, &ehci->regs->frame_list);
+	pdata->pm_async_next  = ehci_readl(ehci, &ehci->regs->async_next);
+	pdata->pm_configured_flag  =
+		ehci_readl(ehci, &ehci->regs->configured_flag);
+	pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
+	pdata->pm_usbgenctrl = ehci_readl(ehci,
+					  hcd->regs + FSL_SOC_USB_USBGENCTRL);
+
+	/* clear the W1C bits */
+	pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
+
+	pdata->suspended = 1;
+
+	/* clear PP to cut power to the port */
+	tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
+	tmp &= ~PORT_POWER;
+	ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);
+
+	return 0;
+}
+
+static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
+	u32 tmp;
+
+	dev_dbg(dev, "suspend=%d already_suspended=%d\n",
+		pdata->suspended, pdata->already_suspended);
+
+	/*
+	 * If the controller was already suspended at suspend time,
+	 * then don't resume it now.
+	 */
+	if (pdata->already_suspended) {
+		dev_dbg(dev, "already suspended, leaving early\n");
+		pdata->already_suspended = 0;
+		return 0;
+	}
+
+	if (!pdata->suspended) {
+		dev_dbg(dev, "not suspended, leaving early\n");
+		return 0;
+	}
+
+	pdata->suspended = 0;
+
+	dev_dbg(dev, "resuming...\n");
+
+	/* set host mode */
+	tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
+	ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
+
+	ehci_writel(ehci, pdata->pm_usbgenctrl,
+		    hcd->regs + FSL_SOC_USB_USBGENCTRL);
+	ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
+		    hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
+
+	ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);
+
+	/* restore EHCI registers */
+	ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
+	ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
+	ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index);
+	ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment);
+	ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list);
+	ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next);
+	ehci_writel(ehci, pdata->pm_configured_flag,
+		    &ehci->regs->configured_flag);
+	ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
+
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	ehci->rh_state = EHCI_RH_RUNNING;
+	dev->power.power_state = PMSG_ON;
+
+	tmp = ehci_readl(ehci, &ehci->regs->command);
+	tmp |= CMD_RUN;
+	ehci_writel(ehci, tmp, &ehci->regs->command);
+
+	usb_hcd_resume_root_hub(hcd);
+
+	return 0;
+}
+#else
+static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
+{
+	return 0;
+}
+
+static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev)
+{
+	return 0;
+}
+#endif /* CONFIG_PPC_MPC512x */
+
+static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+	return container_of(ehci, struct ehci_fsl, ehci);
+}
+
+static int ehci_fsl_drv_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
+	void __iomem *non_ehci = hcd->regs;
+
+	if (of_device_is_compatible(dev->parent->of_node,
+				    "fsl,mpc5121-usb2-dr")) {
+		return ehci_fsl_mpc512x_drv_suspend(dev);
+	}
+
+	ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
+			device_may_wakeup(dev));
+	if (!fsl_deep_sleep())
+		return 0;
+
+	ehci_fsl->usb_ctrl = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+	return 0;
+}
+
+static int ehci_fsl_drv_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	void __iomem *non_ehci = hcd->regs;
+
+	if (of_device_is_compatible(dev->parent->of_node,
+				    "fsl,mpc5121-usb2-dr")) {
+		return ehci_fsl_mpc512x_drv_resume(dev);
+	}
+
+	ehci_prepare_ports_for_controller_resume(ehci);
+	if (!fsl_deep_sleep())
+		return 0;
+
+	usb_root_hub_lost_power(hcd->self.root_hub);
+
+	/* Restore USB PHY settings and enable the controller. */
+	iowrite32be(ehci_fsl->usb_ctrl, non_ehci + FSL_SOC_USB_CTRL);
+
+	ehci_reset(ehci);
+	ehci_fsl_reinit(ehci);
+
+	return 0;
+}
+
+static int ehci_fsl_drv_restore(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	usb_root_hub_lost_power(hcd->self.root_hub);
+	return 0;
+}
+
+static const struct dev_pm_ops ehci_fsl_pm_ops = {
+	.suspend = ehci_fsl_drv_suspend,
+	.resume = ehci_fsl_drv_resume,
+	.restore = ehci_fsl_drv_restore,
+};
+
+#define EHCI_FSL_PM_OPS		(&ehci_fsl_pm_ops)
+#else
+#define EHCI_FSL_PM_OPS		NULL
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_USB_OTG
+static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	u32 status;
+
+	if (!port)
+		return -EINVAL;
+
+	port--;
+
+	/* start port reset before HNP protocol time out */
+	status = readl(&ehci->regs->port_status[port]);
+	if (!(status & PORT_CONNECT))
+		return -ENODEV;
+
+	/* hub_wq will finish the reset later */
+	if (ehci_is_TDI(ehci)) {
+		writel(PORT_RESET |
+		       (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)),
+		       &ehci->regs->port_status[port]);
+	} else {
+		writel(PORT_RESET, &ehci->regs->port_status[port]);
+	}
+
+	return 0;
+}
+#else
+#define ehci_start_port_reset	NULL
+#endif /* CONFIG_USB_OTG */
+
+static const struct ehci_driver_overrides ehci_fsl_overrides __initconst = {
+	.extra_priv_size = sizeof(struct ehci_fsl),
+	.reset = ehci_fsl_setup,
+};
+
+/**
+ * fsl_ehci_drv_remove - shutdown processing for FSL-based HCDs
+ * @pdev: USB Host Controller being removed
+ *
+ * Context: task context, might sleep
+ *
+ * Reverses the effect of usb_hcd_fsl_probe().
+ */
+static int fsl_ehci_drv_remove(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
+		otg_set_host(hcd->usb_phy->otg, NULL);
+		usb_put_phy(hcd->usb_phy);
+	}
+
+	usb_remove_hcd(hcd);
+
+	/*
+	 * do platform specific un-initialization:
+	 * release iomux pins, disable clock, etc.
+	 */
+	if (pdata->exit)
+		pdata->exit(pdev);
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+static struct platform_driver ehci_fsl_driver = {
+	.probe = fsl_ehci_drv_probe,
+	.remove = fsl_ehci_drv_remove,
+	.shutdown = usb_hcd_platform_shutdown,
+	.driver = {
+		.name = "fsl-ehci",
+		.pm = EHCI_FSL_PM_OPS,
+	},
+};
+
+static int __init ehci_fsl_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ehci_init_driver(&fsl_ehci_hc_driver, &ehci_fsl_overrides);
+
+	fsl_ehci_hc_driver.product_desc =
+			"Freescale On-Chip EHCI Host Controller";
+	fsl_ehci_hc_driver.start_port_reset = ehci_start_port_reset;
+
+
+	return platform_driver_register(&ehci_fsl_driver);
+}
+module_init(ehci_fsl_init);
+
+static void __exit ehci_fsl_cleanup(void)
+{
+	platform_driver_unregister(&ehci_fsl_driver);
+}
+module_exit(ehci_fsl_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
new file mode 100644
index 000000000..c95341d47
--- /dev/null
+++ b/drivers/usb/host/ehci-fsl.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright (C) 2005-2010,2012 Freescale Semiconductor, Inc.
+ * Copyright (c) 2005 MontaVista Software
+ */
+#ifndef _EHCI_FSL_H
+#define _EHCI_FSL_H
+
+/* offsets for the non-ehci registers in the FSL SOC USB controller */
+#define FSL_SOC_USB_SBUSCFG	0x90
+#define SBUSCFG_INCR8		0x02	/* INCR8, specified */
+#define FSL_SOC_USB_ULPIVP	0x170
+#define FSL_SOC_USB_PORTSC1	0x184
+#define PORT_PTS_MSK		(3<<30)
+#define PORT_PTS_UTMI		(0<<30)
+#define PORT_PTS_ULPI		(2<<30)
+#define	PORT_PTS_SERIAL		(3<<30)
+#define PORT_PTS_PTW		(1<<28)
+#define FSL_SOC_USB_PORTSC2	0x188
+#define FSL_SOC_USB_USBMODE	0x1a8
+#define USBMODE_CM_MASK		(3 << 0)	/* controller mode mask */
+#define USBMODE_CM_HOST		(3 << 0)	/* controller mode: host */
+#define USBMODE_ES		(1 << 2)	/* (Big) Endian Select */
+
+#define FSL_SOC_USB_USBGENCTRL	0x200
+#define USBGENCTRL_PPP		(1 << 3)
+#define USBGENCTRL_PFP		(1 << 2)
+#define FSL_SOC_USB_ISIPHYCTRL	0x204
+#define ISIPHYCTRL_PXE		(1)
+#define ISIPHYCTRL_PHYE		(1 << 4)
+
+#define FSL_SOC_USB_SNOOP1	0x400	/* NOTE: big-endian */
+#define FSL_SOC_USB_SNOOP2	0x404	/* NOTE: big-endian */
+#define FSL_SOC_USB_AGECNTTHRSH	0x408	/* NOTE: big-endian */
+#define FSL_SOC_USB_PRICTRL	0x40c	/* NOTE: big-endian */
+#define FSL_SOC_USB_SICTRL	0x410	/* NOTE: big-endian */
+#define FSL_SOC_USB_CTRL	0x500	/* NOTE: big-endian */
+#define CTRL_UTMI_PHY_EN	(1<<9)
+#define CTRL_PHY_CLK_VALID	(1 << 17)
+#define SNOOP_SIZE_2GB		0x1e
+
+/* control Register Bit Masks */
+#define CONTROL_REGISTER_W1C_MASK       0x00020000  /* W1C: PHY_CLK_VALID */
+#define ULPI_INT_EN             (1<<0)
+#define WU_INT_EN               (1<<1)
+#define USB_CTRL_USB_EN         (1<<2)
+#define LINE_STATE_FILTER__EN   (1<<3)
+#define KEEP_OTG_ON             (1<<4)
+#define OTG_PORT                (1<<5)
+#define PLL_RESET               (1<<8)
+#define UTMI_PHY_EN             (1<<9)
+#define ULPI_PHY_CLK_SEL        (1<<10)
+#define PHY_CLK_VALID		(1<<17)
+
+/* Retry count for checking UTMI PHY CLK validity */
+#define UTMI_PHY_CLK_VALID_CHK_RETRY 5
+#endif				/* _EHCI_FSL_H */
diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c
new file mode 100644
index 000000000..a2c3b4ec8
--- /dev/null
+++ b/drivers/usb/host/ehci-grlib.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Aeroflex Gaisler GRLIB GRUSBHC EHCI host controller
+ *
+ * GRUSBHC is typically found on LEON/GRLIB SoCs
+ *
+ * (c) Jan Andersson <jan@gaisler.com>
+ *
+ * Based on ehci-ppc-of.c which is:
+ * (c) Valentine Barshak <vbarshak@ru.mvista.com>
+ * and in turn based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de>
+ * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com>
+ */
+
+#include <linux/err.h>
+#include <linux/signal.h>
+
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#define GRUSBHC_HCIVERSION 0x0100 /* Known value of cap. reg. HCIVERSION */
+
+static const struct hc_driver ehci_grlib_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "GRLIB GRUSBHC EHCI",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset			= ehci_setup,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+#endif
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+
+static int ehci_hcd_grlib_probe(struct platform_device *op)
+{
+	struct device_node *dn = op->dev.of_node;
+	struct usb_hcd *hcd;
+	struct ehci_hcd	*ehci = NULL;
+	struct resource res;
+	u32 hc_capbase;
+	int irq;
+	int rv;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	dev_dbg(&op->dev, "initializing GRUSBHC EHCI USB Controller\n");
+
+	rv = of_address_to_resource(dn, 0, &res);
+	if (rv)
+		return rv;
+
+	/* usb_create_hcd requires dma_mask != NULL */
+	op->dev.dma_mask = &op->dev.coherent_dma_mask;
+	hcd = usb_create_hcd(&ehci_grlib_hc_driver, &op->dev,
+			"GRUSBHC EHCI USB");
+	if (!hcd)
+		return -ENOMEM;
+
+	hcd->rsrc_start = res.start;
+	hcd->rsrc_len = resource_size(&res);
+
+	irq = irq_of_parse_and_map(dn, 0);
+	if (irq == NO_IRQ) {
+		dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n",
+			__FILE__);
+		rv = -EBUSY;
+		goto err_irq;
+	}
+
+	hcd->regs = devm_ioremap_resource(&op->dev, &res);
+	if (IS_ERR(hcd->regs)) {
+		rv = PTR_ERR(hcd->regs);
+		goto err_ioremap;
+	}
+
+	ehci = hcd_to_ehci(hcd);
+
+	ehci->caps = hcd->regs;
+
+	/* determine endianness of this implementation */
+	hc_capbase = ehci_readl(ehci, &ehci->caps->hc_capbase);
+	if (HC_VERSION(ehci, hc_capbase) != GRUSBHC_HCIVERSION) {
+		ehci->big_endian_mmio = 1;
+		ehci->big_endian_desc = 1;
+		ehci->big_endian_capbase = 1;
+	}
+
+	rv = usb_add_hcd(hcd, irq, 0);
+	if (rv)
+		goto err_ioremap;
+
+	device_wakeup_enable(hcd->self.controller);
+	return 0;
+
+err_ioremap:
+	irq_dispose_mapping(irq);
+err_irq:
+	usb_put_hcd(hcd);
+
+	return rv;
+}
+
+
+static int ehci_hcd_grlib_remove(struct platform_device *op)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(op);
+
+	dev_dbg(&op->dev, "stopping GRLIB GRUSBHC EHCI USB Controller\n");
+
+	usb_remove_hcd(hcd);
+
+	irq_dispose_mapping(hcd->irq);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+
+static const struct of_device_id ehci_hcd_grlib_of_match[] = {
+	{
+		.name = "GAISLER_EHCI",
+	 },
+	{
+		.name = "01_026",
+	 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ehci_hcd_grlib_of_match);
+
+
+static struct platform_driver ehci_grlib_driver = {
+	.probe		= ehci_hcd_grlib_probe,
+	.remove		= ehci_hcd_grlib_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver = {
+		.name = "grlib-ehci",
+		.of_match_table = ehci_hcd_grlib_of_match,
+	},
+};
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
new file mode 100644
index 000000000..802bfafb1
--- /dev/null
+++ b/drivers/usb/host/ehci-hcd.c
@@ -0,0 +1,1410 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Enhanced Host Controller Interface (EHCI) driver for USB.
+ *
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
+ *
+ * Copyright (c) 2000-2004 by David Brownell
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/vmalloc.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/hrtimer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
+#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
+#include <linux/debugfs.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/unaligned.h>
+
+#if defined(CONFIG_PPC_PS3)
+#include <asm/firmware.h>
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI hc_driver implementation ... experimental, incomplete.
+ * Based on the final 1.0 register interface specification.
+ *
+ * USB 2.0 shows up in upcoming www.pcmcia.org technology.
+ * First was PCMCIA, like ISA; then CardBus, which is PCI.
+ * Next comes "CardBay", using USB 2.0 signals.
+ *
+ * Contains additional contributions by Brad Hards, Rory Bolt, and others.
+ * Special thanks to Intel and VIA for providing host controllers to
+ * test this driver on, and Cypress (including In-System Design) for
+ * providing early devices for those host controllers to talk to!
+ */
+
+#define DRIVER_AUTHOR "David Brownell"
+#define DRIVER_DESC "USB 2.0 'Enhanced' Host Controller (EHCI) Driver"
+
+static const char	hcd_name [] = "ehci_hcd";
+
+
+#undef EHCI_URB_TRACE
+
+/* magic numbers that can affect system performance */
+#define	EHCI_TUNE_CERR		3	/* 0-3 qtd retries; 0 == don't stop */
+#define	EHCI_TUNE_RL_HS		4	/* nak throttle; see 4.9 */
+#define	EHCI_TUNE_RL_TT		0
+#define	EHCI_TUNE_MULT_HS	1	/* 1-3 transactions/uframe; 4.10.3 */
+#define	EHCI_TUNE_MULT_TT	1
+/*
+ * Some drivers think it's safe to schedule isochronous transfers more than
+ * 256 ms into the future (partly as a result of an old bug in the scheduling
+ * code).  In an attempt to avoid trouble, we will use a minimum scheduling
+ * length of 512 frames instead of 256.
+ */
+#define	EHCI_TUNE_FLS		1	/* (medium) 512-frame schedule */
+
+/* Initial IRQ latency:  faster than hw default */
+static int log2_irq_thresh;		// 0 to 6
+module_param (log2_irq_thresh, int, S_IRUGO);
+MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
+
+/* initial park setting:  slower than hw default */
+static unsigned park;
+module_param (park, uint, S_IRUGO);
+MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
+
+/* for flakey hardware, ignore overcurrent indicators */
+static bool ignore_oc;
+module_param (ignore_oc, bool, S_IRUGO);
+MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
+
+#define	INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
+
+/*-------------------------------------------------------------------------*/
+
+#include "ehci.h"
+#include "pci-quirks.h"
+
+static void compute_tt_budget(u8 budget_table[EHCI_BANDWIDTH_SIZE],
+		struct ehci_tt *tt);
+
+/*
+ * The MosChip MCS9990 controller updates its microframe counter
+ * a little before the frame counter, and occasionally we will read
+ * the invalid intermediate value.  Avoid problems by checking the
+ * microframe number (the low-order 3 bits); if they are 0 then
+ * re-read the register to get the correct value.
+ */
+static unsigned ehci_moschip_read_frame_index(struct ehci_hcd *ehci)
+{
+	unsigned uf;
+
+	uf = ehci_readl(ehci, &ehci->regs->frame_index);
+	if (unlikely((uf & 7) == 0))
+		uf = ehci_readl(ehci, &ehci->regs->frame_index);
+	return uf;
+}
+
+static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
+{
+	if (ehci->frame_index_bug)
+		return ehci_moschip_read_frame_index(ehci);
+	return ehci_readl(ehci, &ehci->regs->frame_index);
+}
+
+#include "ehci-dbg.c"
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * ehci_handshake - spin reading hc until handshake completes or fails
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @usec: timeout in microseconds
+ *
+ * Returns negative errno, or zero on success
+ *
+ * Success happens when the "mask" bits have the specified value (hardware
+ * handshake done).  There are two failure modes:  "usec" have passed (major
+ * hardware flakeout), or the register reads as all-ones (hardware removed).
+ *
+ * That last failure should_only happen in cases like physical cardbus eject
+ * before driver shutdown. But it also seems to be caused by bugs in cardbus
+ * bridge shutdown:  shutting down the bridge before the devices using it.
+ */
+int ehci_handshake(struct ehci_hcd *ehci, void __iomem *ptr,
+		   u32 mask, u32 done, int usec)
+{
+	u32	result;
+
+	do {
+		result = ehci_readl(ehci, ptr);
+		if (result == ~(u32)0)		/* card removed */
+			return -ENODEV;
+		result &= mask;
+		if (result == done)
+			return 0;
+		udelay (1);
+		usec--;
+	} while (usec > 0);
+	return -ETIMEDOUT;
+}
+EXPORT_SYMBOL_GPL(ehci_handshake);
+
+/* check TDI/ARC silicon is in host mode */
+static int tdi_in_host_mode (struct ehci_hcd *ehci)
+{
+	u32		tmp;
+
+	tmp = ehci_readl(ehci, &ehci->regs->usbmode);
+	return (tmp & 3) == USBMODE_CM_HC;
+}
+
+/*
+ * Force HC to halt state from unknown (EHCI spec section 2.3).
+ * Must be called with interrupts enabled and the lock not held.
+ */
+static int ehci_halt (struct ehci_hcd *ehci)
+{
+	u32	temp;
+
+	spin_lock_irq(&ehci->lock);
+
+	/* disable any irqs left enabled by previous code */
+	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+
+	if (ehci_is_TDI(ehci) && !tdi_in_host_mode(ehci)) {
+		spin_unlock_irq(&ehci->lock);
+		return 0;
+	}
+
+	/*
+	 * This routine gets called during probe before ehci->command
+	 * has been initialized, so we can't rely on its value.
+	 */
+	ehci->command &= ~CMD_RUN;
+	temp = ehci_readl(ehci, &ehci->regs->command);
+	temp &= ~(CMD_RUN | CMD_IAAD);
+	ehci_writel(ehci, temp, &ehci->regs->command);
+
+	spin_unlock_irq(&ehci->lock);
+	synchronize_irq(ehci_to_hcd(ehci)->irq);
+
+	return ehci_handshake(ehci, &ehci->regs->status,
+			  STS_HALT, STS_HALT, 16 * 125);
+}
+
+/* put TDI/ARC silicon into EHCI mode */
+static void tdi_reset (struct ehci_hcd *ehci)
+{
+	u32		tmp;
+
+	tmp = ehci_readl(ehci, &ehci->regs->usbmode);
+	tmp |= USBMODE_CM_HC;
+	/* The default byte access to MMR space is LE after
+	 * controller reset. Set the required endian mode
+	 * for transfer buffers to match the host microprocessor
+	 */
+	if (ehci_big_endian_mmio(ehci))
+		tmp |= USBMODE_BE;
+	ehci_writel(ehci, tmp, &ehci->regs->usbmode);
+}
+
+/*
+ * Reset a non-running (STS_HALT == 1) controller.
+ * Must be called with interrupts enabled and the lock not held.
+ */
+int ehci_reset(struct ehci_hcd *ehci)
+{
+	int	retval;
+	u32	command = ehci_readl(ehci, &ehci->regs->command);
+
+	/* If the EHCI debug controller is active, special care must be
+	 * taken before and after a host controller reset */
+	if (ehci->debug && !dbgp_reset_prep(ehci_to_hcd(ehci)))
+		ehci->debug = NULL;
+
+	command |= CMD_RESET;
+	dbg_cmd (ehci, "reset", command);
+	ehci_writel(ehci, command, &ehci->regs->command);
+	ehci->rh_state = EHCI_RH_HALTED;
+	ehci->next_statechange = jiffies;
+	retval = ehci_handshake(ehci, &ehci->regs->command,
+			    CMD_RESET, 0, 250 * 1000);
+
+	if (ehci->has_hostpc) {
+		ehci_writel(ehci, USBMODE_EX_HC | USBMODE_EX_VBPS,
+				&ehci->regs->usbmode_ex);
+		ehci_writel(ehci, TXFIFO_DEFAULT, &ehci->regs->txfill_tuning);
+	}
+	if (retval)
+		return retval;
+
+	if (ehci_is_TDI(ehci))
+		tdi_reset (ehci);
+
+	if (ehci->debug)
+		dbgp_external_startup(ehci_to_hcd(ehci));
+
+	ehci->port_c_suspend = ehci->suspended_ports =
+			ehci->resuming_ports = 0;
+	return retval;
+}
+EXPORT_SYMBOL_GPL(ehci_reset);
+
+/*
+ * Idle the controller (turn off the schedules).
+ * Must be called with interrupts enabled and the lock not held.
+ */
+static void ehci_quiesce (struct ehci_hcd *ehci)
+{
+	u32	temp;
+
+	if (ehci->rh_state != EHCI_RH_RUNNING)
+		return;
+
+	/* wait for any schedule enables/disables to take effect */
+	temp = (ehci->command << 10) & (STS_ASS | STS_PSS);
+	ehci_handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, temp,
+			16 * 125);
+
+	/* then disable anything that's still active */
+	spin_lock_irq(&ehci->lock);
+	ehci->command &= ~(CMD_ASE | CMD_PSE);
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	spin_unlock_irq(&ehci->lock);
+
+	/* hardware can take 16 microframes to turn off ... */
+	ehci_handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, 0,
+			16 * 125);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void end_iaa_cycle(struct ehci_hcd *ehci);
+static void end_unlink_async(struct ehci_hcd *ehci);
+static void unlink_empty_async(struct ehci_hcd *ehci);
+static void ehci_work(struct ehci_hcd *ehci);
+static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
+static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
+static int ehci_port_power(struct ehci_hcd *ehci, int portnum, bool enable);
+
+#include "ehci-timer.c"
+#include "ehci-hub.c"
+#include "ehci-mem.c"
+#include "ehci-q.c"
+#include "ehci-sched.c"
+#include "ehci-sysfs.c"
+
+/*-------------------------------------------------------------------------*/
+
+/* On some systems, leaving remote wakeup enabled prevents system shutdown.
+ * The firmware seems to think that powering off is a wakeup event!
+ * This routine turns off remote wakeup and everything else, on all ports.
+ */
+static void ehci_turn_off_all_ports(struct ehci_hcd *ehci)
+{
+	int	port = HCS_N_PORTS(ehci->hcs_params);
+
+	while (port--) {
+		spin_unlock_irq(&ehci->lock);
+		ehci_port_power(ehci, port, false);
+		spin_lock_irq(&ehci->lock);
+		ehci_writel(ehci, PORT_RWC_BITS,
+				&ehci->regs->port_status[port]);
+	}
+}
+
+/*
+ * Halt HC, turn off all ports, and let the BIOS use the companion controllers.
+ * Must be called with interrupts enabled and the lock not held.
+ */
+static void ehci_silence_controller(struct ehci_hcd *ehci)
+{
+	ehci_halt(ehci);
+
+	spin_lock_irq(&ehci->lock);
+	ehci->rh_state = EHCI_RH_HALTED;
+	ehci_turn_off_all_ports(ehci);
+
+	/* make BIOS/etc use companion controller during reboot */
+	ehci_writel(ehci, 0, &ehci->regs->configured_flag);
+
+	/* unblock posted writes */
+	ehci_readl(ehci, &ehci->regs->configured_flag);
+	spin_unlock_irq(&ehci->lock);
+}
+
+/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
+ * This forcibly disables dma and IRQs, helping kexec and other cases
+ * where the next system software may expect clean state.
+ */
+static void ehci_shutdown(struct usb_hcd *hcd)
+{
+	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
+
+	/**
+	 * Protect the system from crashing at system shutdown in cases where
+	 * usb host is not added yet from OTG controller driver.
+	 * As ehci_setup() not done yet, so stop accessing registers or
+	 * variables initialized in ehci_setup()
+	 */
+	if (!ehci->sbrn)
+		return;
+
+	spin_lock_irq(&ehci->lock);
+	ehci->shutdown = true;
+	ehci->rh_state = EHCI_RH_STOPPING;
+	ehci->enabled_hrtimer_events = 0;
+	spin_unlock_irq(&ehci->lock);
+
+	ehci_silence_controller(ehci);
+
+	hrtimer_cancel(&ehci->hrtimer);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * ehci_work is called from some interrupts, timers, and so on.
+ * it calls driver completion functions, after dropping ehci->lock.
+ */
+static void ehci_work (struct ehci_hcd *ehci)
+{
+	/* another CPU may drop ehci->lock during a schedule scan while
+	 * it reports urb completions.  this flag guards against bogus
+	 * attempts at re-entrant schedule scanning.
+	 */
+	if (ehci->scanning) {
+		ehci->need_rescan = true;
+		return;
+	}
+	ehci->scanning = true;
+
+ rescan:
+	ehci->need_rescan = false;
+	if (ehci->async_count)
+		scan_async(ehci);
+	if (ehci->intr_count > 0)
+		scan_intr(ehci);
+	if (ehci->isoc_count > 0)
+		scan_isoc(ehci);
+	if (ehci->need_rescan)
+		goto rescan;
+	ehci->scanning = false;
+
+	/* the IO watchdog guards against hardware or driver bugs that
+	 * misplace IRQs, and should let us run completely without IRQs.
+	 * such lossage has been observed on both VT6202 and VT8235.
+	 */
+	turn_on_io_watchdog(ehci);
+}
+
+/*
+ * Called when the ehci_hcd module is removed.
+ */
+static void ehci_stop (struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+
+	ehci_dbg (ehci, "stop\n");
+
+	/* no more interrupts ... */
+
+	spin_lock_irq(&ehci->lock);
+	ehci->enabled_hrtimer_events = 0;
+	spin_unlock_irq(&ehci->lock);
+
+	ehci_quiesce(ehci);
+	ehci_silence_controller(ehci);
+	ehci_reset (ehci);
+
+	hrtimer_cancel(&ehci->hrtimer);
+	remove_sysfs_files(ehci);
+	remove_debug_files (ehci);
+
+	/* root hub is shut down separately (first, when possible) */
+	spin_lock_irq (&ehci->lock);
+	end_free_itds(ehci);
+	spin_unlock_irq (&ehci->lock);
+	ehci_mem_cleanup (ehci);
+
+	if (ehci->amd_pll_fix == 1)
+		usb_amd_dev_put();
+
+	dbg_status (ehci, "ehci_stop completed",
+		    ehci_readl(ehci, &ehci->regs->status));
+}
+
+/* one-time init, only for memory state */
+static int ehci_init(struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	u32			temp;
+	int			retval;
+	u32			hcc_params;
+	struct ehci_qh_hw	*hw;
+
+	spin_lock_init(&ehci->lock);
+
+	/*
+	 * keep io watchdog by default, those good HCDs could turn off it later
+	 */
+	ehci->need_io_watchdog = 1;
+
+	hrtimer_init(&ehci->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+	ehci->hrtimer.function = ehci_hrtimer_func;
+	ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT;
+
+	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
+
+	/*
+	 * by default set standard 80% (== 100 usec/uframe) max periodic
+	 * bandwidth as required by USB 2.0
+	 */
+	ehci->uframe_periodic_max = 100;
+
+	/*
+	 * hw default: 1K periodic list heads, one per frame.
+	 * periodic_size can shrink by USBCMD update if hcc_params allows.
+	 */
+	ehci->periodic_size = DEFAULT_I_TDPS;
+	INIT_LIST_HEAD(&ehci->async_unlink);
+	INIT_LIST_HEAD(&ehci->async_idle);
+	INIT_LIST_HEAD(&ehci->intr_unlink_wait);
+	INIT_LIST_HEAD(&ehci->intr_unlink);
+	INIT_LIST_HEAD(&ehci->intr_qh_list);
+	INIT_LIST_HEAD(&ehci->cached_itd_list);
+	INIT_LIST_HEAD(&ehci->cached_sitd_list);
+	INIT_LIST_HEAD(&ehci->tt_list);
+
+	if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
+		/* periodic schedule size can be smaller than default */
+		switch (EHCI_TUNE_FLS) {
+		case 0: ehci->periodic_size = 1024; break;
+		case 1: ehci->periodic_size = 512; break;
+		case 2: ehci->periodic_size = 256; break;
+		default:	BUG();
+		}
+	}
+	if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
+		return retval;
+
+	/* controllers may cache some of the periodic schedule ... */
+	if (HCC_ISOC_CACHE(hcc_params))		// full frame cache
+		ehci->i_thresh = 0;
+	else					// N microframes cached
+		ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
+
+	/*
+	 * dedicate a qh for the async ring head, since we couldn't unlink
+	 * a 'real' qh without stopping the async schedule [4.8].  use it
+	 * as the 'reclamation list head' too.
+	 * its dummy is used in hw_alt_next of many tds, to prevent the qh
+	 * from automatically advancing to the next td after short reads.
+	 */
+	ehci->async->qh_next.qh = NULL;
+	hw = ehci->async->hw;
+	hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
+	hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
+#if defined(CONFIG_PPC_PS3)
+	hw->hw_info1 |= cpu_to_hc32(ehci, QH_INACTIVATE);
+#endif
+	hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
+	hw->hw_qtd_next = EHCI_LIST_END(ehci);
+	ehci->async->qh_state = QH_STATE_LINKED;
+	hw->hw_alt_next = QTD_NEXT(ehci, ehci->async->dummy->qtd_dma);
+
+	/* clear interrupt enables, set irq latency */
+	if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
+		log2_irq_thresh = 0;
+	temp = 1 << (16 + log2_irq_thresh);
+	if (HCC_PER_PORT_CHANGE_EVENT(hcc_params)) {
+		ehci->has_ppcd = 1;
+		ehci_dbg(ehci, "enable per-port change event\n");
+		temp |= CMD_PPCEE;
+	}
+	if (HCC_CANPARK(hcc_params)) {
+		/* HW default park == 3, on hardware that supports it (like
+		 * NVidia and ALI silicon), maximizes throughput on the async
+		 * schedule by avoiding QH fetches between transfers.
+		 *
+		 * With fast usb storage devices and NForce2, "park" seems to
+		 * make problems:  throughput reduction (!), data errors...
+		 */
+		if (park) {
+			park = min(park, (unsigned) 3);
+			temp |= CMD_PARK;
+			temp |= park << 8;
+		}
+		ehci_dbg(ehci, "park %d\n", park);
+	}
+	if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
+		/* periodic schedule size can be smaller than default */
+		temp &= ~(3 << 2);
+		temp |= (EHCI_TUNE_FLS << 2);
+	}
+	ehci->command = temp;
+
+	/* Accept arbitrarily long scatter-gather lists */
+	if (!hcd->localmem_pool)
+		hcd->self.sg_tablesize = ~0;
+
+	/* Prepare for unlinking active QHs */
+	ehci->old_current = ~0;
+	return 0;
+}
+
+/* start HC running; it's halted, ehci_init() has been run (once) */
+static int ehci_run (struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	u32			temp;
+	u32			hcc_params;
+	int			rc;
+
+	hcd->uses_new_polling = 1;
+
+	/* EHCI spec section 4.1 */
+
+	ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
+	ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
+
+	/*
+	 * hcc_params controls whether ehci->regs->segment must (!!!)
+	 * be used; it constrains QH/ITD/SITD and QTD locations.
+	 * dma_pool consistent memory always uses segment zero.
+	 * streaming mappings for I/O buffers, like dma_map_single(),
+	 * can return segments above 4GB, if the device allows.
+	 *
+	 * NOTE:  the dma mask is visible through dev->dma_mask, so
+	 * drivers can pass this info along ... like NETIF_F_HIGHDMA,
+	 * Scsi_Host.highmem_io, and so forth.  It's readonly to all
+	 * host side drivers though.
+	 */
+	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
+	if (HCC_64BIT_ADDR(hcc_params)) {
+		ehci_writel(ehci, 0, &ehci->regs->segment);
+#if 0
+// this is deeply broken on almost all architectures
+		if (!dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)))
+			ehci_info(ehci, "enabled 64bit DMA\n");
+#endif
+	}
+
+
+	// Philips, Intel, and maybe others need CMD_RUN before the
+	// root hub will detect new devices (why?); NEC doesn't
+	ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
+	ehci->command |= CMD_RUN;
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	dbg_cmd (ehci, "init", ehci->command);
+
+	/*
+	 * Start, enabling full USB 2.0 functionality ... usb 1.1 devices
+	 * are explicitly handed to companion controller(s), so no TT is
+	 * involved with the root hub.  (Except where one is integrated,
+	 * and there's no companion controller unless maybe for USB OTG.)
+	 *
+	 * Turning on the CF flag will transfer ownership of all ports
+	 * from the companions to the EHCI controller.  If any of the
+	 * companions are in the middle of a port reset at the time, it
+	 * could cause trouble.  Write-locking ehci_cf_port_reset_rwsem
+	 * guarantees that no resets are in progress.  After we set CF,
+	 * a short delay lets the hardware catch up; new resets shouldn't
+	 * be started before the port switching actions could complete.
+	 */
+	down_write(&ehci_cf_port_reset_rwsem);
+	ehci->rh_state = EHCI_RH_RUNNING;
+	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+
+	/* Wait until HC become operational */
+	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
+	msleep(5);
+
+	/* For Aspeed, STS_HALT also depends on ASS/PSS status.
+	 * Check CMD_RUN instead.
+	 */
+	if (ehci->is_aspeed)
+		rc = ehci_handshake(ehci, &ehci->regs->command, CMD_RUN,
+				    1, 100 * 1000);
+	else
+		rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT,
+				    0, 100 * 1000);
+
+	up_write(&ehci_cf_port_reset_rwsem);
+
+	if (rc) {
+		ehci_err(ehci, "USB %x.%x, controller refused to start: %d\n",
+			 ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), rc);
+		return rc;
+	}
+
+	ehci->last_periodic_enable = ktime_get_real();
+
+	temp = HC_VERSION(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
+	ehci_info (ehci,
+		"USB %x.%x started, EHCI %x.%02x%s\n",
+		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
+		temp >> 8, temp & 0xff,
+		(ignore_oc || ehci->spurious_oc) ? ", overcurrent ignored" : "");
+
+	ehci_writel(ehci, INTR_MASK,
+		    &ehci->regs->intr_enable); /* Turn On Interrupts */
+
+	/* GRR this is run-once init(), being done every time the HC starts.
+	 * So long as they're part of class devices, we can't do it init()
+	 * since the class device isn't created that early.
+	 */
+	create_debug_files(ehci);
+	create_sysfs_files(ehci);
+
+	return 0;
+}
+
+int ehci_setup(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+
+	ehci->regs = (void __iomem *)ehci->caps +
+	    HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	ehci->sbrn = HCD_USB2;
+
+	/* data structure init */
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	retval = ehci_halt(ehci);
+	if (retval) {
+		ehci_mem_cleanup(ehci);
+		return retval;
+	}
+
+	ehci_reset(ehci);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ehci_setup);
+
+/*-------------------------------------------------------------------------*/
+
+static irqreturn_t ehci_irq (struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	u32			status, current_status, masked_status, pcd_status = 0;
+	u32			cmd;
+	int			bh;
+
+	spin_lock(&ehci->lock);
+
+	status = 0;
+	current_status = ehci_readl(ehci, &ehci->regs->status);
+restart:
+
+	/* e.g. cardbus physical eject */
+	if (current_status == ~(u32) 0) {
+		ehci_dbg (ehci, "device removed\n");
+		goto dead;
+	}
+	status |= current_status;
+
+	/*
+	 * We don't use STS_FLR, but some controllers don't like it to
+	 * remain on, so mask it out along with the other status bits.
+	 */
+	masked_status = current_status & (INTR_MASK | STS_FLR);
+
+	/* Shared IRQ? */
+	if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) {
+		spin_unlock(&ehci->lock);
+		return IRQ_NONE;
+	}
+
+	/* clear (just) interrupts */
+	ehci_writel(ehci, masked_status, &ehci->regs->status);
+
+	/* For edge interrupts, don't race with an interrupt bit being raised */
+	current_status = ehci_readl(ehci, &ehci->regs->status);
+	if (current_status & INTR_MASK)
+		goto restart;
+
+	cmd = ehci_readl(ehci, &ehci->regs->command);
+	bh = 0;
+
+	/* normal [4.15.1.2] or error [4.15.1.1] completion */
+	if (likely ((status & (STS_INT|STS_ERR)) != 0)) {
+		if (likely ((status & STS_ERR) == 0)) {
+			INCR(ehci->stats.normal);
+		} else {
+			/* Force to check port status */
+			if (ehci->has_ci_pec_bug)
+				status |= STS_PCD;
+			INCR(ehci->stats.error);
+		}
+		bh = 1;
+	}
+
+	/* complete the unlinking of some qh [4.15.2.3] */
+	if (status & STS_IAA) {
+
+		/* Turn off the IAA watchdog */
+		ehci->enabled_hrtimer_events &= ~BIT(EHCI_HRTIMER_IAA_WATCHDOG);
+
+		/*
+		 * Mild optimization: Allow another IAAD to reset the
+		 * hrtimer, if one occurs before the next expiration.
+		 * In theory we could always cancel the hrtimer, but
+		 * tests show that about half the time it will be reset
+		 * for some other event anyway.
+		 */
+		if (ehci->next_hrtimer_event == EHCI_HRTIMER_IAA_WATCHDOG)
+			++ehci->next_hrtimer_event;
+
+		/* guard against (alleged) silicon errata */
+		if (cmd & CMD_IAAD)
+			ehci_dbg(ehci, "IAA with IAAD still set?\n");
+		if (ehci->iaa_in_progress)
+			INCR(ehci->stats.iaa);
+		end_iaa_cycle(ehci);
+	}
+
+	/* remote wakeup [4.3.1] */
+	if (status & STS_PCD) {
+		unsigned	i = HCS_N_PORTS (ehci->hcs_params);
+		u32		ppcd = ~0;
+
+		/* kick root hub later */
+		pcd_status = status;
+
+		/* resume root hub? */
+		if (ehci->rh_state == EHCI_RH_SUSPENDED)
+			usb_hcd_resume_root_hub(hcd);
+
+		/* get per-port change detect bits */
+		if (ehci->has_ppcd)
+			ppcd = status >> 16;
+
+		while (i--) {
+			int pstatus;
+
+			/* leverage per-port change bits feature */
+			if (!(ppcd & (1 << i)))
+				continue;
+			pstatus = ehci_readl(ehci,
+					 &ehci->regs->port_status[i]);
+
+			if (pstatus & PORT_OWNER)
+				continue;
+			if (!(test_bit(i, &ehci->suspended_ports) &&
+					((pstatus & PORT_RESUME) ||
+						!(pstatus & PORT_SUSPEND)) &&
+					(pstatus & PORT_PE) &&
+					ehci->reset_done[i] == 0))
+				continue;
+
+			/* start USB_RESUME_TIMEOUT msec resume signaling from
+			 * this port, and make hub_wq collect
+			 * PORT_STAT_C_SUSPEND to stop that signaling.
+			 */
+			ehci->reset_done[i] = jiffies +
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
+			set_bit(i, &ehci->resuming_ports);
+			ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
+			usb_hcd_start_port_resume(&hcd->self, i);
+			mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
+		}
+	}
+
+	/* PCI errors [4.15.2.4] */
+	if (unlikely ((status & STS_FATAL) != 0)) {
+		ehci_err(ehci, "fatal error\n");
+		dbg_cmd(ehci, "fatal", cmd);
+		dbg_status(ehci, "fatal", status);
+dead:
+		usb_hc_died(hcd);
+
+		/* Don't let the controller do anything more */
+		ehci->shutdown = true;
+		ehci->rh_state = EHCI_RH_STOPPING;
+		ehci->command &= ~(CMD_RUN | CMD_ASE | CMD_PSE);
+		ehci_writel(ehci, ehci->command, &ehci->regs->command);
+		ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+		ehci_handle_controller_death(ehci);
+
+		/* Handle completions when the controller stops */
+		bh = 0;
+	}
+
+	if (bh)
+		ehci_work (ehci);
+	spin_unlock(&ehci->lock);
+	if (pcd_status)
+		usb_hcd_poll_rh_status(hcd);
+	return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * non-error returns are a promise to giveback() the urb later
+ * we drop ownership so next owner (or urb unlink) can get it
+ *
+ * urb + dev is in hcd.self.controller.urb_list
+ * we're queueing TDs onto software and hardware lists
+ *
+ * hcd-specific init for hcpriv hasn't been done yet
+ *
+ * NOTE:  control, bulk, and interrupt share the same code to append TDs
+ * to a (possibly active) QH, and the same QH scanning code.
+ */
+static int ehci_urb_enqueue (
+	struct usb_hcd	*hcd,
+	struct urb	*urb,
+	gfp_t		mem_flags
+) {
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	struct list_head	qtd_list;
+
+	INIT_LIST_HEAD (&qtd_list);
+
+	switch (usb_pipetype (urb->pipe)) {
+	case PIPE_CONTROL:
+		/* qh_completions() code doesn't handle all the fault cases
+		 * in multi-TD control transfers.  Even 1KB is rare anyway.
+		 */
+		if (urb->transfer_buffer_length > (16 * 1024))
+			return -EMSGSIZE;
+		fallthrough;
+	/* case PIPE_BULK: */
+	default:
+		if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
+			return -ENOMEM;
+		return submit_async(ehci, urb, &qtd_list, mem_flags);
+
+	case PIPE_INTERRUPT:
+		if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
+			return -ENOMEM;
+		return intr_submit(ehci, urb, &qtd_list, mem_flags);
+
+	case PIPE_ISOCHRONOUS:
+		if (urb->dev->speed == USB_SPEED_HIGH)
+			return itd_submit (ehci, urb, mem_flags);
+		else
+			return sitd_submit (ehci, urb, mem_flags);
+	}
+}
+
+/* remove from hardware lists
+ * completions normally happen asynchronously
+ */
+
+static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	struct ehci_qh		*qh;
+	unsigned long		flags;
+	int			rc;
+
+	spin_lock_irqsave (&ehci->lock, flags);
+	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (rc)
+		goto done;
+
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+		/*
+		 * We don't expedite dequeue for isochronous URBs.
+		 * Just wait until they complete normally or their
+		 * time slot expires.
+		 */
+	} else {
+		qh = (struct ehci_qh *) urb->hcpriv;
+		qh->unlink_reason |= QH_UNLINK_REQUESTED;
+		switch (qh->qh_state) {
+		case QH_STATE_LINKED:
+			if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)
+				start_unlink_intr(ehci, qh);
+			else
+				start_unlink_async(ehci, qh);
+			break;
+		case QH_STATE_COMPLETING:
+			qh->dequeue_during_giveback = 1;
+			break;
+		case QH_STATE_UNLINK:
+		case QH_STATE_UNLINK_WAIT:
+			/* already started */
+			break;
+		case QH_STATE_IDLE:
+			/* QH might be waiting for a Clear-TT-Buffer */
+			qh_completions(ehci, qh);
+			break;
+		}
+	}
+done:
+	spin_unlock_irqrestore (&ehci->lock, flags);
+	return rc;
+}
+
+/*-------------------------------------------------------------------------*/
+
+// bulk qh holds the data toggle
+
+static void
+ehci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	unsigned long		flags;
+	struct ehci_qh		*qh;
+
+	/* ASSERT:  any requests/urbs are being unlinked */
+	/* ASSERT:  nobody can be submitting urbs for this any more */
+
+rescan:
+	spin_lock_irqsave (&ehci->lock, flags);
+	qh = ep->hcpriv;
+	if (!qh)
+		goto done;
+
+	/* endpoints can be iso streams.  for now, we don't
+	 * accelerate iso completions ... so spin a while.
+	 */
+	if (qh->hw == NULL) {
+		struct ehci_iso_stream	*stream = ep->hcpriv;
+
+		if (!list_empty(&stream->td_list))
+			goto idle_timeout;
+
+		/* BUG_ON(!list_empty(&stream->free_list)); */
+		reserve_release_iso_bandwidth(ehci, stream, -1);
+		kfree(stream);
+		goto done;
+	}
+
+	qh->unlink_reason |= QH_UNLINK_REQUESTED;
+	switch (qh->qh_state) {
+	case QH_STATE_LINKED:
+		if (list_empty(&qh->qtd_list))
+			qh->unlink_reason |= QH_UNLINK_QUEUE_EMPTY;
+		else
+			WARN_ON(1);
+		if (usb_endpoint_type(&ep->desc) != USB_ENDPOINT_XFER_INT)
+			start_unlink_async(ehci, qh);
+		else
+			start_unlink_intr(ehci, qh);
+		fallthrough;
+	case QH_STATE_COMPLETING:	/* already in unlinking */
+	case QH_STATE_UNLINK:		/* wait for hw to finish? */
+	case QH_STATE_UNLINK_WAIT:
+idle_timeout:
+		spin_unlock_irqrestore (&ehci->lock, flags);
+		schedule_timeout_uninterruptible(1);
+		goto rescan;
+	case QH_STATE_IDLE:		/* fully unlinked */
+		if (qh->clearing_tt)
+			goto idle_timeout;
+		if (list_empty (&qh->qtd_list)) {
+			if (qh->ps.bw_uperiod)
+				reserve_release_intr_bandwidth(ehci, qh, -1);
+			qh_destroy(ehci, qh);
+			break;
+		}
+		fallthrough;
+	default:
+		/* caller was supposed to have unlinked any requests;
+		 * that's not our job.  just leak this memory.
+		 */
+		ehci_err (ehci, "qh %p (#%02x) state %d%s\n",
+			qh, ep->desc.bEndpointAddress, qh->qh_state,
+			list_empty (&qh->qtd_list) ? "" : "(has tds)");
+		break;
+	}
+ done:
+	ep->hcpriv = NULL;
+	spin_unlock_irqrestore (&ehci->lock, flags);
+}
+
+static void
+ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	struct ehci_qh		*qh;
+	int			eptype = usb_endpoint_type(&ep->desc);
+	int			epnum = usb_endpoint_num(&ep->desc);
+	int			is_out = usb_endpoint_dir_out(&ep->desc);
+	unsigned long		flags;
+
+	if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
+		return;
+
+	spin_lock_irqsave(&ehci->lock, flags);
+	qh = ep->hcpriv;
+
+	/* For Bulk and Interrupt endpoints we maintain the toggle state
+	 * in the hardware; the toggle bits in udev aren't used at all.
+	 * When an endpoint is reset by usb_clear_halt() we must reset
+	 * the toggle bit in the QH.
+	 */
+	if (qh) {
+		if (!list_empty(&qh->qtd_list)) {
+			WARN_ONCE(1, "clear_halt for a busy endpoint\n");
+		} else {
+			/* The toggle value in the QH can't be updated
+			 * while the QH is active.  Unlink it now;
+			 * re-linking will call qh_refresh().
+			 */
+			usb_settoggle(qh->ps.udev, epnum, is_out, 0);
+			qh->unlink_reason |= QH_UNLINK_REQUESTED;
+			if (eptype == USB_ENDPOINT_XFER_BULK)
+				start_unlink_async(ehci, qh);
+			else
+				start_unlink_intr(ehci, qh);
+		}
+	}
+	spin_unlock_irqrestore(&ehci->lock, flags);
+}
+
+static int ehci_get_frame (struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	return (ehci_read_frame_index(ehci) >> 3) % ehci->periodic_size;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Device addition and removal */
+
+static void ehci_remove_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+
+	spin_lock_irq(&ehci->lock);
+	drop_tt(udev);
+	spin_unlock_irq(&ehci->lock);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_PM
+
+/* Clear wakeup signal locked in zhaoxin platform when device plug in. */
+static void ehci_zx_wakeup_clear(struct ehci_hcd *ehci)
+{
+	u32 __iomem	*reg = &ehci->regs->port_status[4];
+	u32 		t1 = ehci_readl(ehci, reg);
+
+	t1 &= (u32)~0xf0000;
+	t1 |= PORT_TEST_FORCE;
+	ehci_writel(ehci, t1, reg);
+	t1 = ehci_readl(ehci, reg);
+	msleep(1);
+	t1 &= (u32)~0xf0000;
+	ehci_writel(ehci, t1, reg);
+	ehci_readl(ehci, reg);
+	msleep(1);
+	t1 = ehci_readl(ehci, reg);
+	ehci_writel(ehci, t1 | PORT_CSC, reg);
+	ehci_readl(ehci, reg);
+}
+
+/* suspend/resume, section 4.3 */
+
+/* These routines handle the generic parts of controller suspend/resume */
+
+int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+
+	if (time_before(jiffies, ehci->next_statechange))
+		msleep(10);
+
+	/*
+	 * Root hub was already suspended.  Disable IRQ emission and
+	 * mark HW unaccessible.  The PM and USB cores make sure that
+	 * the root hub is either suspended or stopped.
+	 */
+	ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
+
+	spin_lock_irq(&ehci->lock);
+	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+	(void) ehci_readl(ehci, &ehci->regs->intr_enable);
+
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	spin_unlock_irq(&ehci->lock);
+
+	synchronize_irq(hcd->irq);
+
+	/* Check for race with a wakeup request */
+	if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) {
+		ehci_resume(hcd, false);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ehci_suspend);
+
+/* Returns 0 if power was preserved, 1 if power was lost */
+int ehci_resume(struct usb_hcd *hcd, bool force_reset)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+
+	if (time_before(jiffies, ehci->next_statechange))
+		msleep(100);
+
+	/* Mark hardware accessible again as we are back to full power by now */
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	if (ehci->shutdown)
+		return 0;		/* Controller is dead */
+
+	if (ehci->zx_wakeup_clear_needed)
+		ehci_zx_wakeup_clear(ehci);
+
+	/*
+	 * If CF is still set and reset isn't forced
+	 * then we maintained suspend power.
+	 * Just undo the effect of ehci_suspend().
+	 */
+	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF &&
+			!force_reset) {
+		int	mask = INTR_MASK;
+
+		ehci_prepare_ports_for_controller_resume(ehci);
+
+		spin_lock_irq(&ehci->lock);
+		if (ehci->shutdown)
+			goto skip;
+
+		if (!hcd->self.root_hub->do_remote_wakeup)
+			mask &= ~STS_PCD;
+		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
+		ehci_readl(ehci, &ehci->regs->intr_enable);
+ skip:
+		spin_unlock_irq(&ehci->lock);
+		return 0;
+	}
+
+	/*
+	 * Else reset, to cope with power loss or resume from hibernation
+	 * having let the firmware kick in during reboot.
+	 */
+	usb_root_hub_lost_power(hcd->self.root_hub);
+	(void) ehci_halt(ehci);
+	(void) ehci_reset(ehci);
+
+	spin_lock_irq(&ehci->lock);
+	if (ehci->shutdown)
+		goto skip;
+
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
+
+	ehci->rh_state = EHCI_RH_SUSPENDED;
+	spin_unlock_irq(&ehci->lock);
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(ehci_resume);
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Generic structure: This gets copied for platform drivers so that
+ * individual entries can be overridden as needed.
+ */
+
+static const struct hc_driver ehci_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"EHCI Host Controller",
+	.hcd_priv_size =	sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			ehci_irq,
+	.flags =		HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset =		ehci_setup,
+	.start =		ehci_run,
+	.stop =			ehci_stop,
+	.shutdown =		ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		ehci_urb_enqueue,
+	.urb_dequeue =		ehci_urb_dequeue,
+	.endpoint_disable =	ehci_endpoint_disable,
+	.endpoint_reset =	ehci_endpoint_reset,
+	.clear_tt_buffer_complete =	ehci_clear_tt_buffer_complete,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	ehci_hub_status_data,
+	.hub_control =		ehci_hub_control,
+	.bus_suspend =		ehci_bus_suspend,
+	.bus_resume =		ehci_bus_resume,
+	.relinquish_port =	ehci_relinquish_port,
+	.port_handed_over =	ehci_port_handed_over,
+	.get_resuming_ports =	ehci_get_resuming_ports,
+
+	/*
+	 * device support
+	 */
+	.free_dev =		ehci_remove_device,
+#ifdef CONFIG_USB_HCD_TEST_MODE
+	/* EH SINGLE_STEP_SET_FEATURE test support */
+	.submit_single_step_set_feature	= ehci_submit_single_step_set_feature,
+#endif
+};
+
+void ehci_init_driver(struct hc_driver *drv,
+		const struct ehci_driver_overrides *over)
+{
+	/* Copy the generic table to drv and then apply the overrides */
+	*drv = ehci_hc_driver;
+
+	if (over) {
+		drv->hcd_priv_size += over->extra_priv_size;
+		if (over->reset)
+			drv->reset = over->reset;
+		if (over->port_power)
+			drv->port_power = over->port_power;
+	}
+}
+EXPORT_SYMBOL_GPL(ehci_init_driver);
+
+/*-------------------------------------------------------------------------*/
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR (DRIVER_AUTHOR);
+MODULE_LICENSE ("GPL");
+
+#ifdef CONFIG_USB_EHCI_SH
+#include "ehci-sh.c"
+#endif
+
+#ifdef CONFIG_PPC_PS3
+#include "ehci-ps3.c"
+#endif
+
+#ifdef CONFIG_USB_EHCI_HCD_PPC_OF
+#include "ehci-ppc-of.c"
+#endif
+
+#ifdef CONFIG_XPS_USB_HCD_XILINX
+#include "ehci-xilinx-of.c"
+#endif
+
+#ifdef CONFIG_SPARC_LEON
+#include "ehci-grlib.c"
+#endif
+
+static struct platform_driver * const platform_drivers[] = {
+#ifdef CONFIG_USB_EHCI_SH
+	&ehci_hcd_sh_driver,
+#endif
+#ifdef CONFIG_USB_EHCI_HCD_PPC_OF
+	&ehci_hcd_ppc_of_driver,
+#endif
+#ifdef CONFIG_XPS_USB_HCD_XILINX
+	&ehci_hcd_xilinx_of_driver,
+#endif
+#ifdef CONFIG_SPARC_LEON
+	&ehci_grlib_driver,
+#endif
+};
+
+static int __init ehci_hcd_init(void)
+{
+	int retval = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	set_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
+	if (test_bit(USB_UHCI_LOADED, &usb_hcds_loaded) ||
+			test_bit(USB_OHCI_LOADED, &usb_hcds_loaded))
+		printk(KERN_WARNING "Warning! ehci_hcd should always be loaded"
+				" before uhci_hcd and ohci_hcd, not after\n");
+
+	pr_debug("%s: block sizes: qh %zd qtd %zd itd %zd sitd %zd\n",
+		 hcd_name,
+		 sizeof(struct ehci_qh), sizeof(struct ehci_qtd),
+		 sizeof(struct ehci_itd), sizeof(struct ehci_sitd));
+
+#ifdef CONFIG_DYNAMIC_DEBUG
+	ehci_debug_root = debugfs_create_dir("ehci", usb_debug_root);
+#endif
+
+	retval = platform_register_drivers(platform_drivers, ARRAY_SIZE(platform_drivers));
+	if (retval < 0)
+		goto clean0;
+
+#ifdef CONFIG_PPC_PS3
+	retval = ps3_ehci_driver_register(&ps3_ehci_driver);
+	if (retval < 0)
+		goto clean1;
+#endif
+
+	return 0;
+
+#ifdef CONFIG_PPC_PS3
+clean1:
+#endif
+	platform_unregister_drivers(platform_drivers, ARRAY_SIZE(platform_drivers));
+clean0:
+#ifdef CONFIG_DYNAMIC_DEBUG
+	debugfs_remove(ehci_debug_root);
+	ehci_debug_root = NULL;
+#endif
+	clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
+	return retval;
+}
+module_init(ehci_hcd_init);
+
+static void __exit ehci_hcd_cleanup(void)
+{
+#ifdef CONFIG_PPC_PS3
+	ps3_ehci_driver_unregister(&ps3_ehci_driver);
+#endif
+	platform_unregister_drivers(platform_drivers, ARRAY_SIZE(platform_drivers));
+#ifdef CONFIG_DYNAMIC_DEBUG
+	debugfs_remove(ehci_debug_root);
+#endif
+	clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
+}
+module_exit(ehci_hcd_cleanup);
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
new file mode 100644
index 000000000..1aee392e8
--- /dev/null
+++ b/drivers/usb/host/ehci-hub.c
@@ -0,0 +1,1222 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2001-2004 by David Brownell
+ */
+
+/* this file is part of ehci-hcd.c */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Root Hub ... the nonsharable stuff
+ *
+ * Registers don't need cpu_to_le32, that happens transparently
+ */
+
+/*-------------------------------------------------------------------------*/
+
+#define	PORT_WAKE_BITS	(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
+
+#ifdef	CONFIG_PM
+
+static void unlink_empty_async_suspended(struct ehci_hcd *ehci);
+
+static int persist_enabled_on_companion(struct usb_device *udev, void *unused)
+{
+	return !udev->maxchild && udev->persist_enabled &&
+		udev->bus->root_hub->speed < USB_SPEED_HIGH;
+}
+
+/* After a power loss, ports that were owned by the companion must be
+ * reset so that the companion can still own them.
+ */
+static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
+{
+	u32 __iomem	*reg;
+	u32		status;
+	int		port;
+	__le32		buf;
+	struct usb_hcd	*hcd = ehci_to_hcd(ehci);
+
+	if (!ehci->owned_ports)
+		return;
+
+	/*
+	 * USB 1.1 devices are mostly HIDs, which don't need to persist across
+	 * suspends. If we ensure that none of our companion's devices have
+	 * persist_enabled (by looking through all USB 1.1 buses in the system),
+	 * we can skip this and avoid slowing resume down. Devices without
+	 * persist will just get reenumerated shortly after resume anyway.
+	 */
+	if (!usb_for_each_dev(NULL, persist_enabled_on_companion))
+		return;
+
+	/* Make sure the ports are powered */
+	port = HCS_N_PORTS(ehci->hcs_params);
+	while (port--) {
+		if (test_bit(port, &ehci->owned_ports)) {
+			reg = &ehci->regs->port_status[port];
+			status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
+			if (!(status & PORT_POWER))
+				ehci_port_power(ehci, port, true);
+		}
+	}
+
+	/* Give the connections some time to appear */
+	msleep(20);
+
+	spin_lock_irq(&ehci->lock);
+	port = HCS_N_PORTS(ehci->hcs_params);
+	while (port--) {
+		if (test_bit(port, &ehci->owned_ports)) {
+			reg = &ehci->regs->port_status[port];
+			status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
+
+			/* Port already owned by companion? */
+			if (status & PORT_OWNER)
+				clear_bit(port, &ehci->owned_ports);
+			else if (test_bit(port, &ehci->companion_ports))
+				ehci_writel(ehci, status & ~PORT_PE, reg);
+			else {
+				spin_unlock_irq(&ehci->lock);
+				ehci_hub_control(hcd, SetPortFeature,
+						USB_PORT_FEAT_RESET, port + 1,
+						NULL, 0);
+				spin_lock_irq(&ehci->lock);
+			}
+		}
+	}
+	spin_unlock_irq(&ehci->lock);
+
+	if (!ehci->owned_ports)
+		return;
+	msleep(90);		/* Wait for resets to complete */
+
+	spin_lock_irq(&ehci->lock);
+	port = HCS_N_PORTS(ehci->hcs_params);
+	while (port--) {
+		if (test_bit(port, &ehci->owned_ports)) {
+			spin_unlock_irq(&ehci->lock);
+			ehci_hub_control(hcd, GetPortStatus,
+					0, port + 1,
+					(char *) &buf, sizeof(buf));
+			spin_lock_irq(&ehci->lock);
+
+			/* The companion should now own the port,
+			 * but if something went wrong the port must not
+			 * remain enabled.
+			 */
+			reg = &ehci->regs->port_status[port];
+			status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
+			if (status & PORT_OWNER)
+				ehci_writel(ehci, status | PORT_CSC, reg);
+			else {
+				ehci_dbg(ehci, "failed handover port %d: %x\n",
+						port + 1, status);
+				ehci_writel(ehci, status & ~PORT_PE, reg);
+			}
+		}
+	}
+
+	ehci->owned_ports = 0;
+	spin_unlock_irq(&ehci->lock);
+}
+
+static int ehci_port_change(struct ehci_hcd *ehci)
+{
+	int i = HCS_N_PORTS(ehci->hcs_params);
+
+	/* First check if the controller indicates a change event */
+
+	if (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)
+		return 1;
+
+	/*
+	 * Not all controllers appear to update this while going from D3 to D0,
+	 * so check the individual port status registers as well
+	 */
+
+	while (i--)
+		if (ehci_readl(ehci, &ehci->regs->port_status[i]) & PORT_CSC)
+			return 1;
+
+	return 0;
+}
+
+void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
+		bool suspending, bool do_wakeup)
+{
+	int		port;
+	u32		temp;
+
+	/* If remote wakeup is enabled for the root hub but disabled
+	 * for the controller, we must adjust all the port wakeup flags
+	 * when the controller is suspended or resumed.  In all other
+	 * cases they don't need to be changed.
+	 */
+	if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
+		return;
+
+	spin_lock_irq(&ehci->lock);
+
+	/* clear phy low-power mode before changing wakeup flags */
+	if (ehci->has_tdi_phy_lpm) {
+		port = HCS_N_PORTS(ehci->hcs_params);
+		while (port--) {
+			u32 __iomem	*hostpc_reg = &ehci->regs->hostpc[port];
+
+			temp = ehci_readl(ehci, hostpc_reg);
+			ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
+		}
+		spin_unlock_irq(&ehci->lock);
+		msleep(5);
+		spin_lock_irq(&ehci->lock);
+	}
+
+	port = HCS_N_PORTS(ehci->hcs_params);
+	while (port--) {
+		u32 __iomem	*reg = &ehci->regs->port_status[port];
+		u32		t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
+		u32		t2 = t1 & ~PORT_WAKE_BITS;
+
+		/* If we are suspending the controller, clear the flags.
+		 * If we are resuming the controller, set the wakeup flags.
+		 */
+		if (!suspending) {
+			if (t1 & PORT_CONNECT)
+				t2 |= PORT_WKOC_E | PORT_WKDISC_E;
+			else
+				t2 |= PORT_WKOC_E | PORT_WKCONN_E;
+		}
+		ehci_writel(ehci, t2, reg);
+	}
+
+	/* enter phy low-power mode again */
+	if (ehci->has_tdi_phy_lpm) {
+		port = HCS_N_PORTS(ehci->hcs_params);
+		while (port--) {
+			u32 __iomem	*hostpc_reg = &ehci->regs->hostpc[port];
+
+			temp = ehci_readl(ehci, hostpc_reg);
+			ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg);
+		}
+	}
+
+	/* Does the root hub have a port wakeup pending? */
+	if (!suspending && ehci_port_change(ehci))
+		usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
+
+	spin_unlock_irq(&ehci->lock);
+}
+EXPORT_SYMBOL_GPL(ehci_adjust_port_wakeup_flags);
+
+static int ehci_bus_suspend (struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	int			port;
+	int			mask;
+	int			changed;
+	bool			fs_idle_delay;
+
+	ehci_dbg(ehci, "suspend root hub\n");
+
+	if (time_before (jiffies, ehci->next_statechange))
+		msleep(5);
+
+	/* stop the schedules */
+	ehci_quiesce(ehci);
+
+	spin_lock_irq (&ehci->lock);
+	if (ehci->rh_state < EHCI_RH_RUNNING)
+		goto done;
+
+	/* Once the controller is stopped, port resumes that are already
+	 * in progress won't complete.  Hence if remote wakeup is enabled
+	 * for the root hub and any ports are in the middle of a resume or
+	 * remote wakeup, we must fail the suspend.
+	 */
+	if (hcd->self.root_hub->do_remote_wakeup) {
+		if (ehci->resuming_ports) {
+			spin_unlock_irq(&ehci->lock);
+			ehci_dbg(ehci, "suspend failed because a port is resuming\n");
+			return -EBUSY;
+		}
+	}
+
+	/* Unlike other USB host controller types, EHCI doesn't have
+	 * any notion of "global" or bus-wide suspend.  The driver has
+	 * to manually suspend all the active unsuspended ports, and
+	 * then manually resume them in the bus_resume() routine.
+	 */
+	ehci->bus_suspended = 0;
+	ehci->owned_ports = 0;
+	changed = 0;
+	fs_idle_delay = false;
+	port = HCS_N_PORTS(ehci->hcs_params);
+	while (port--) {
+		u32 __iomem	*reg = &ehci->regs->port_status [port];
+		u32		t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
+		u32		t2 = t1 & ~PORT_WAKE_BITS;
+
+		/* keep track of which ports we suspend */
+		if (t1 & PORT_OWNER)
+			set_bit(port, &ehci->owned_ports);
+		else if ((t1 & PORT_PE) && !(t1 & PORT_SUSPEND)) {
+			t2 |= PORT_SUSPEND;
+			set_bit(port, &ehci->bus_suspended);
+		}
+
+		/* enable remote wakeup on all ports, if told to do so */
+		if (hcd->self.root_hub->do_remote_wakeup) {
+			/* only enable appropriate wake bits, otherwise the
+			 * hardware can not go phy low power mode. If a race
+			 * condition happens here(connection change during bits
+			 * set), the port change detection will finally fix it.
+			 */
+			if (t1 & PORT_CONNECT)
+				t2 |= PORT_WKOC_E | PORT_WKDISC_E;
+			else
+				t2 |= PORT_WKOC_E | PORT_WKCONN_E;
+		}
+
+		if (t1 != t2) {
+			/*
+			 * On some controllers, Wake-On-Disconnect will
+			 * generate false wakeup signals until the bus
+			 * switches over to full-speed idle.  For their
+			 * sake, add a delay if we need one.
+			 */
+			if ((t2 & PORT_WKDISC_E) &&
+					ehci_port_speed(ehci, t2) ==
+						USB_PORT_STAT_HIGH_SPEED)
+				fs_idle_delay = true;
+			ehci_writel(ehci, t2, reg);
+			changed = 1;
+		}
+	}
+	spin_unlock_irq(&ehci->lock);
+
+	if (changed && ehci_has_fsl_susp_errata(ehci))
+		/*
+		 * Wait for at least 10 millisecondes to ensure the controller
+		 * enter the suspend status before initiating a port resume
+		 * using the Force Port Resume bit (Not-EHCI compatible).
+		 */
+		usleep_range(10000, 20000);
+
+	if ((changed && ehci->has_tdi_phy_lpm) || fs_idle_delay) {
+		/*
+		 * Wait for HCD to enter low-power mode or for the bus
+		 * to switch to full-speed idle.
+		 */
+		usleep_range(5000, 5500);
+	}
+
+	if (changed && ehci->has_tdi_phy_lpm) {
+		spin_lock_irq(&ehci->lock);
+		port = HCS_N_PORTS(ehci->hcs_params);
+		while (port--) {
+			u32 __iomem	*hostpc_reg = &ehci->regs->hostpc[port];
+			u32		t3;
+
+			t3 = ehci_readl(ehci, hostpc_reg);
+			ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
+			t3 = ehci_readl(ehci, hostpc_reg);
+			ehci_dbg(ehci, "Port %d phy low-power mode %s\n",
+					port, (t3 & HOSTPC_PHCD) ?
+					"succeeded" : "failed");
+		}
+		spin_unlock_irq(&ehci->lock);
+	}
+
+	/* Apparently some devices need a >= 1-uframe delay here */
+	if (ehci->bus_suspended)
+		udelay(150);
+
+	/* turn off now-idle HC */
+	ehci_halt (ehci);
+
+	spin_lock_irq(&ehci->lock);
+	if (ehci->enabled_hrtimer_events & BIT(EHCI_HRTIMER_POLL_DEAD))
+		ehci_handle_controller_death(ehci);
+	if (ehci->rh_state != EHCI_RH_RUNNING)
+		goto done;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
+
+	unlink_empty_async_suspended(ehci);
+
+	/* Some Synopsys controllers mistakenly leave IAA turned on */
+	ehci_writel(ehci, STS_IAA, &ehci->regs->status);
+
+	/* Any IAA cycle that started before the suspend is now invalid */
+	end_iaa_cycle(ehci);
+	ehci_handle_start_intr_unlinks(ehci);
+	ehci_handle_intr_unlinks(ehci);
+	end_free_itds(ehci);
+
+	/* allow remote wakeup */
+	mask = INTR_MASK;
+	if (!hcd->self.root_hub->do_remote_wakeup)
+		mask &= ~STS_PCD;
+	ehci_writel(ehci, mask, &ehci->regs->intr_enable);
+	ehci_readl(ehci, &ehci->regs->intr_enable);
+
+ done:
+	ehci->next_statechange = jiffies + msecs_to_jiffies(10);
+	ehci->enabled_hrtimer_events = 0;
+	ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT;
+	spin_unlock_irq (&ehci->lock);
+
+	hrtimer_cancel(&ehci->hrtimer);
+	return 0;
+}
+
+
+/* caller has locked the root hub, and should reset/reinit on error */
+static int ehci_bus_resume (struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	u32			temp;
+	u32			power_okay;
+	int			i;
+	unsigned long		resume_needed = 0;
+
+	if (time_before (jiffies, ehci->next_statechange))
+		msleep(5);
+	spin_lock_irq (&ehci->lock);
+	if (!HCD_HW_ACCESSIBLE(hcd) || ehci->shutdown)
+		goto shutdown;
+
+	if (unlikely(ehci->debug)) {
+		if (!dbgp_reset_prep(hcd))
+			ehci->debug = NULL;
+		else
+			dbgp_external_startup(hcd);
+	}
+
+	/* Ideally and we've got a real resume here, and no port's power
+	 * was lost.  (For PCI, that means Vaux was maintained.)  But we
+	 * could instead be restoring a swsusp snapshot -- so that BIOS was
+	 * the last user of the controller, not reset/pm hardware keeping
+	 * state we gave to it.
+	 */
+	power_okay = ehci_readl(ehci, &ehci->regs->intr_enable);
+	ehci_dbg(ehci, "resume root hub%s\n",
+			power_okay ? "" : " after power loss");
+
+	/* at least some APM implementations will try to deliver
+	 * IRQs right away, so delay them until we're ready.
+	 */
+	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+
+	/* re-init operational registers */
+	ehci_writel(ehci, 0, &ehci->regs->segment);
+	ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
+	ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next);
+
+	/* restore CMD_RUN, framelist size, and irq threshold */
+	ehci->command |= CMD_RUN;
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	ehci->rh_state = EHCI_RH_RUNNING;
+
+	/*
+	 * According to Bugzilla #8190, the port status for some controllers
+	 * will be wrong without a delay. At their wrong status, the port
+	 * is enabled, but not suspended neither resumed.
+	 */
+	i = HCS_N_PORTS(ehci->hcs_params);
+	while (i--) {
+		temp = ehci_readl(ehci, &ehci->regs->port_status[i]);
+		if ((temp & PORT_PE) &&
+				!(temp & (PORT_SUSPEND | PORT_RESUME))) {
+			ehci_dbg(ehci, "Port status(0x%x) is wrong\n", temp);
+			spin_unlock_irq(&ehci->lock);
+			msleep(8);
+			spin_lock_irq(&ehci->lock);
+			break;
+		}
+	}
+
+	if (ehci->shutdown)
+		goto shutdown;
+
+	/* clear phy low-power mode before resume */
+	if (ehci->bus_suspended && ehci->has_tdi_phy_lpm) {
+		i = HCS_N_PORTS(ehci->hcs_params);
+		while (i--) {
+			if (test_bit(i, &ehci->bus_suspended)) {
+				u32 __iomem	*hostpc_reg =
+							&ehci->regs->hostpc[i];
+
+				temp = ehci_readl(ehci, hostpc_reg);
+				ehci_writel(ehci, temp & ~HOSTPC_PHCD,
+						hostpc_reg);
+			}
+		}
+		spin_unlock_irq(&ehci->lock);
+		msleep(5);
+		spin_lock_irq(&ehci->lock);
+		if (ehci->shutdown)
+			goto shutdown;
+	}
+
+	/* manually resume the ports we suspended during bus_suspend() */
+	i = HCS_N_PORTS (ehci->hcs_params);
+	while (i--) {
+		temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
+		temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
+		if (test_bit(i, &ehci->bus_suspended) &&
+				(temp & PORT_SUSPEND)) {
+			temp |= PORT_RESUME;
+			set_bit(i, &resume_needed);
+		}
+		ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
+	}
+
+	/*
+	 * msleep for USB_RESUME_TIMEOUT ms only if code is trying to resume
+	 * port
+	 */
+	if (resume_needed) {
+		spin_unlock_irq(&ehci->lock);
+		msleep(USB_RESUME_TIMEOUT);
+		spin_lock_irq(&ehci->lock);
+		if (ehci->shutdown)
+			goto shutdown;
+	}
+
+	i = HCS_N_PORTS (ehci->hcs_params);
+	while (i--) {
+		temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
+		if (test_bit(i, &resume_needed)) {
+			temp &= ~(PORT_RWC_BITS | PORT_SUSPEND | PORT_RESUME);
+			ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
+		}
+	}
+
+	ehci->next_statechange = jiffies + msecs_to_jiffies(5);
+	spin_unlock_irq(&ehci->lock);
+
+	ehci_handover_companion_ports(ehci);
+
+	/* Now we can safely re-enable irqs */
+	spin_lock_irq(&ehci->lock);
+	if (ehci->shutdown)
+		goto shutdown;
+	ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
+	(void) ehci_readl(ehci, &ehci->regs->intr_enable);
+	spin_unlock_irq(&ehci->lock);
+
+	return 0;
+
+ shutdown:
+	spin_unlock_irq(&ehci->lock);
+	return -ESHUTDOWN;
+}
+
+static unsigned long ehci_get_resuming_ports(struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+
+	return ehci->resuming_ports;
+}
+
+#else
+
+#define ehci_bus_suspend	NULL
+#define ehci_bus_resume		NULL
+#define ehci_get_resuming_ports	NULL
+
+#endif	/* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Sets the owner of a port
+ */
+static void set_owner(struct ehci_hcd *ehci, int portnum, int new_owner)
+{
+	u32 __iomem		*status_reg;
+	u32			port_status;
+	int 			try;
+
+	status_reg = &ehci->regs->port_status[portnum];
+
+	/*
+	 * The controller won't set the OWNER bit if the port is
+	 * enabled, so this loop will sometimes require at least two
+	 * iterations: one to disable the port and one to set OWNER.
+	 */
+	for (try = 4; try > 0; --try) {
+		spin_lock_irq(&ehci->lock);
+		port_status = ehci_readl(ehci, status_reg);
+		if ((port_status & PORT_OWNER) == new_owner
+				|| (port_status & (PORT_OWNER | PORT_CONNECT))
+					== 0)
+			try = 0;
+		else {
+			port_status ^= PORT_OWNER;
+			port_status &= ~(PORT_PE | PORT_RWC_BITS);
+			ehci_writel(ehci, port_status, status_reg);
+		}
+		spin_unlock_irq(&ehci->lock);
+		if (try > 1)
+			msleep(5);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int check_reset_complete (
+	struct ehci_hcd	*ehci,
+	int		index,
+	u32 __iomem	*status_reg,
+	int		port_status
+) {
+	if (!(port_status & PORT_CONNECT))
+		return port_status;
+
+	/* if reset finished and it's still not enabled -- handoff */
+	if (!(port_status & PORT_PE)) {
+
+		/* with integrated TT, there's nobody to hand it to! */
+		if (ehci_is_TDI(ehci)) {
+			ehci_dbg (ehci,
+				"Failed to enable port %d on root hub TT\n",
+				index+1);
+			return port_status;
+		}
+
+		ehci_dbg (ehci, "port %d full speed --> companion\n",
+			index + 1);
+
+		// what happens if HCS_N_CC(params) == 0 ?
+		port_status |= PORT_OWNER;
+		port_status &= ~PORT_RWC_BITS;
+		ehci_writel(ehci, port_status, status_reg);
+
+		/* ensure 440EPX ohci controller state is operational */
+		if (ehci->has_amcc_usb23)
+			set_ohci_hcfs(ehci, 1);
+	} else {
+		ehci_dbg(ehci, "port %d reset complete, port enabled\n",
+			index + 1);
+		/* ensure 440EPx ohci controller state is suspended */
+		if (ehci->has_amcc_usb23)
+			set_ohci_hcfs(ehci, 0);
+	}
+
+	return port_status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+
+/* build "status change" packet (one or two bytes) from HC registers */
+
+static int
+ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
+{
+	struct ehci_hcd	*ehci = hcd_to_ehci (hcd);
+	u32		temp, status;
+	u32		mask;
+	int		ports, i, retval = 1;
+	unsigned long	flags;
+	u32		ppcd = ~0;
+
+	/* init status to no-changes */
+	buf [0] = 0;
+	ports = HCS_N_PORTS (ehci->hcs_params);
+	if (ports > 7) {
+		buf [1] = 0;
+		retval++;
+	}
+
+	/* Inform the core about resumes-in-progress by returning
+	 * a non-zero value even if there are no status changes.
+	 */
+	status = ehci->resuming_ports;
+
+	/* Some boards (mostly VIA?) report bogus overcurrent indications,
+	 * causing massive log spam unless we completely ignore them.  It
+	 * may be relevant that VIA VT8235 controllers, where PORT_POWER is
+	 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
+	 * PORT_POWER; that's surprising, but maybe within-spec.
+	 */
+	if (!ignore_oc && !ehci->spurious_oc)
+		mask = PORT_CSC | PORT_PEC | PORT_OCC;
+	else
+		mask = PORT_CSC | PORT_PEC;
+	// PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
+
+	/* no hub change reports (bit 0) for now (power, ...) */
+
+	/* port N changes (bit N)? */
+	spin_lock_irqsave (&ehci->lock, flags);
+
+	/* get per-port change detect bits */
+	if (ehci->has_ppcd)
+		ppcd = ehci_readl(ehci, &ehci->regs->status) >> 16;
+
+	for (i = 0; i < ports; i++) {
+		/* leverage per-port change bits feature */
+		if (ppcd & (1 << i))
+			temp = ehci_readl(ehci, &ehci->regs->port_status[i]);
+		else
+			temp = 0;
+
+		/*
+		 * Return status information even for ports with OWNER set.
+		 * Otherwise hub_wq wouldn't see the disconnect event when a
+		 * high-speed device is switched over to the companion
+		 * controller by the user.
+		 */
+
+		if ((temp & mask) != 0 || test_bit(i, &ehci->port_c_suspend)
+				|| (ehci->reset_done[i] && time_after_eq(
+					jiffies, ehci->reset_done[i]))
+				|| ehci_has_ci_pec_bug(ehci, temp)) {
+			if (i < 7)
+			    buf [0] |= 1 << (i + 1);
+			else
+			    buf [1] |= 1 << (i - 7);
+			status = STS_PCD;
+		}
+	}
+
+	/* If a resume is in progress, make sure it can finish */
+	if (ehci->resuming_ports)
+		mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(25));
+
+	spin_unlock_irqrestore (&ehci->lock, flags);
+	return status ? retval : 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void
+ehci_hub_descriptor (
+	struct ehci_hcd			*ehci,
+	struct usb_hub_descriptor	*desc
+) {
+	int		ports = HCS_N_PORTS (ehci->hcs_params);
+	u16		temp;
+
+	desc->bDescriptorType = USB_DT_HUB;
+	desc->bPwrOn2PwrGood = 10;	/* ehci 1.0, 2.3.9 says 20ms max */
+	desc->bHubContrCurrent = 0;
+
+	desc->bNbrPorts = ports;
+	temp = 1 + (ports / 8);
+	desc->bDescLength = 7 + 2 * temp;
+
+	/* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+	memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
+	memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
+
+	temp = HUB_CHAR_INDV_PORT_OCPM;	/* per-port overcurrent reporting */
+	if (HCS_PPC (ehci->hcs_params))
+		temp |= HUB_CHAR_INDV_PORT_LPSM; /* per-port power control */
+	else
+		temp |= HUB_CHAR_NO_LPSM; /* no power switching */
+#if 0
+// re-enable when we support USB_PORT_FEAT_INDICATOR below.
+	if (HCS_INDICATOR (ehci->hcs_params))
+		temp |= HUB_CHAR_PORTIND; /* per-port indicators (LEDs) */
+#endif
+	desc->wHubCharacteristics = cpu_to_le16(temp);
+}
+
+/*-------------------------------------------------------------------------*/
+
+int ehci_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength
+) {
+	struct ehci_hcd	*ehci = hcd_to_ehci (hcd);
+	int		ports = HCS_N_PORTS (ehci->hcs_params);
+	u32 __iomem	*status_reg, *hostpc_reg;
+	u32		temp, temp1, status;
+	unsigned long	flags;
+	int		retval = 0;
+	unsigned	selector;
+
+	/*
+	 * Avoid out-of-bounds values while calculating the port index
+	 * from wIndex.  The compiler doesn't like pointers to invalid
+	 * addresses, even if they are never used.
+	 */
+	temp = (wIndex - 1) & 0xff;
+	if (temp >= HCS_N_PORTS_MAX)
+		temp = 0;
+	status_reg = &ehci->regs->port_status[temp];
+	hostpc_reg = &ehci->regs->hostpc[temp];
+
+	/*
+	 * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
+	 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
+	 * (track current state ourselves) ... blink for diagnostics,
+	 * power, "this is the one", etc.  EHCI spec supports this.
+	 */
+
+	spin_lock_irqsave (&ehci->lock, flags);
+	switch (typeReq) {
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* no hub-wide feature/status flags */
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		temp = ehci_readl(ehci, status_reg);
+		temp &= ~PORT_RWC_BITS;
+
+		/*
+		 * Even if OWNER is set, so the port is owned by the
+		 * companion controller, hub_wq needs to be able to clear
+		 * the port-change status bits (especially
+		 * USB_PORT_STAT_C_CONNECTION).
+		 */
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			ehci_writel(ehci, temp & ~PORT_PE, status_reg);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			ehci_writel(ehci, temp | PORT_PEC, status_reg);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			if (temp & PORT_RESET)
+				goto error;
+			if (ehci->no_selective_suspend)
+				break;
+#ifdef CONFIG_USB_OTG
+			if ((hcd->self.otg_port == (wIndex + 1))
+			    && hcd->self.b_hnp_enable) {
+				otg_start_hnp(hcd->usb_phy->otg);
+				break;
+			}
+#endif
+			if (!(temp & PORT_SUSPEND))
+				break;
+			if ((temp & PORT_PE) == 0)
+				goto error;
+
+			/* clear phy low-power mode before resume */
+			if (ehci->has_tdi_phy_lpm) {
+				temp1 = ehci_readl(ehci, hostpc_reg);
+				ehci_writel(ehci, temp1 & ~HOSTPC_PHCD,
+						hostpc_reg);
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				msleep(5);/* wait to leave low-power mode */
+				spin_lock_irqsave(&ehci->lock, flags);
+			}
+			/* resume signaling for 20 msec */
+			temp &= ~PORT_WAKE_BITS;
+			ehci_writel(ehci, temp | PORT_RESUME, status_reg);
+			ehci->reset_done[wIndex] = jiffies
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
+			set_bit(wIndex, &ehci->resuming_ports);
+			usb_hcd_start_port_resume(&hcd->self, wIndex);
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			clear_bit(wIndex, &ehci->port_c_suspend);
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (HCS_PPC(ehci->hcs_params)) {
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				ehci_port_power(ehci, wIndex, false);
+				spin_lock_irqsave(&ehci->lock, flags);
+			}
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			ehci_writel(ehci, temp | PORT_CSC, status_reg);
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			ehci_writel(ehci, temp | PORT_OCC, status_reg);
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			/* GetPortStatus clears reset */
+			break;
+		default:
+			goto error;
+		}
+		ehci_readl(ehci, &ehci->regs->command);	/* unblock posted write */
+		break;
+	case GetHubDescriptor:
+		ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
+			buf);
+		break;
+	case GetHubStatus:
+		/* no hub-wide feature/status flags */
+		memset (buf, 0, 4);
+		//cpu_to_le32s ((u32 *) buf);
+		break;
+	case GetPortStatus:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		status = 0;
+		temp = ehci_readl(ehci, status_reg);
+
+		// wPortChange bits
+		if (temp & PORT_CSC)
+			status |= USB_PORT_STAT_C_CONNECTION << 16;
+		if (temp & PORT_PEC)
+			status |= USB_PORT_STAT_C_ENABLE << 16;
+
+		if (ehci_has_ci_pec_bug(ehci, temp)) {
+			status |= USB_PORT_STAT_C_ENABLE << 16;
+			ehci_info(ehci,
+				"PE is cleared by HW port:%d PORTSC:%08x\n",
+				wIndex + 1, temp);
+		}
+
+		if ((temp & PORT_OCC) && (!ignore_oc && !ehci->spurious_oc)){
+			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
+
+			/*
+			 * Hubs should disable port power on over-current.
+			 * However, not all EHCI implementations do this
+			 * automatically, even if they _do_ support per-port
+			 * power switching; they're allowed to just limit the
+			 * current.  hub_wq will turn the power back on.
+			 */
+			if (((temp & PORT_OC) || (ehci->need_oc_pp_cycle))
+					&& HCS_PPC(ehci->hcs_params)) {
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				ehci_port_power(ehci, wIndex, false);
+				spin_lock_irqsave(&ehci->lock, flags);
+				temp = ehci_readl(ehci, status_reg);
+			}
+		}
+
+		/* no reset or resume pending */
+		if (!ehci->reset_done[wIndex]) {
+
+			/* Remote Wakeup received? */
+			if (temp & PORT_RESUME) {
+				/* resume signaling for 20 msec */
+				ehci->reset_done[wIndex] = jiffies
+						+ msecs_to_jiffies(20);
+				usb_hcd_start_port_resume(&hcd->self, wIndex);
+				set_bit(wIndex, &ehci->resuming_ports);
+				/* check the port again */
+				mod_timer(&ehci_to_hcd(ehci)->rh_timer,
+						ehci->reset_done[wIndex]);
+			}
+
+		/* reset or resume not yet complete */
+		} else if (!time_after_eq(jiffies, ehci->reset_done[wIndex])) {
+			;	/* wait until it is complete */
+
+		/* resume completed */
+		} else if (test_bit(wIndex, &ehci->resuming_ports)) {
+			clear_bit(wIndex, &ehci->suspended_ports);
+			set_bit(wIndex, &ehci->port_c_suspend);
+			ehci->reset_done[wIndex] = 0;
+			usb_hcd_end_port_resume(&hcd->self, wIndex);
+
+			/* stop resume signaling */
+			temp &= ~(PORT_RWC_BITS | PORT_SUSPEND | PORT_RESUME);
+			ehci_writel(ehci, temp, status_reg);
+			clear_bit(wIndex, &ehci->resuming_ports);
+			retval = ehci_handshake(ehci, status_reg,
+					PORT_RESUME, 0, 2000 /* 2msec */);
+			if (retval != 0) {
+				ehci_err(ehci, "port %d resume error %d\n",
+						wIndex + 1, retval);
+				goto error;
+			}
+			temp = ehci_readl(ehci, status_reg);
+
+		/* whoever resets must GetPortStatus to complete it!! */
+		} else {
+			status |= USB_PORT_STAT_C_RESET << 16;
+			ehci->reset_done [wIndex] = 0;
+
+			/* force reset to complete */
+			ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
+					status_reg);
+			/* REVISIT:  some hardware needs 550+ usec to clear
+			 * this bit; seems too long to spin routinely...
+			 */
+			retval = ehci_handshake(ehci, status_reg,
+					PORT_RESET, 0, 1000);
+			if (retval != 0) {
+				ehci_err (ehci, "port %d reset error %d\n",
+					wIndex + 1, retval);
+				goto error;
+			}
+
+			/* see what we found out */
+			temp = check_reset_complete (ehci, wIndex, status_reg,
+					ehci_readl(ehci, status_reg));
+		}
+
+		/* transfer dedicated ports to the companion hc */
+		if ((temp & PORT_CONNECT) &&
+				test_bit(wIndex, &ehci->companion_ports)) {
+			temp &= ~PORT_RWC_BITS;
+			temp |= PORT_OWNER;
+			ehci_writel(ehci, temp, status_reg);
+			ehci_dbg(ehci, "port %d --> companion\n", wIndex + 1);
+			temp = ehci_readl(ehci, status_reg);
+		}
+
+		/*
+		 * Even if OWNER is set, there's no harm letting hub_wq
+		 * see the wPortStatus values (they should all be 0 except
+		 * for PORT_POWER anyway).
+		 */
+
+		if (temp & PORT_CONNECT) {
+			status |= USB_PORT_STAT_CONNECTION;
+			// status may be from integrated TT
+			if (ehci->has_hostpc) {
+				temp1 = ehci_readl(ehci, hostpc_reg);
+				status |= ehci_port_speed(ehci, temp1);
+			} else
+				status |= ehci_port_speed(ehci, temp);
+		}
+		if (temp & PORT_PE)
+			status |= USB_PORT_STAT_ENABLE;
+
+		/* maybe the port was unsuspended without our knowledge */
+		if (temp & (PORT_SUSPEND|PORT_RESUME)) {
+			status |= USB_PORT_STAT_SUSPEND;
+		} else if (test_bit(wIndex, &ehci->suspended_ports)) {
+			clear_bit(wIndex, &ehci->suspended_ports);
+			clear_bit(wIndex, &ehci->resuming_ports);
+			ehci->reset_done[wIndex] = 0;
+			if (temp & PORT_PE)
+				set_bit(wIndex, &ehci->port_c_suspend);
+			usb_hcd_end_port_resume(&hcd->self, wIndex);
+		}
+
+		if (temp & PORT_OC)
+			status |= USB_PORT_STAT_OVERCURRENT;
+		if (temp & PORT_RESET)
+			status |= USB_PORT_STAT_RESET;
+		if (temp & PORT_POWER)
+			status |= USB_PORT_STAT_POWER;
+		if (test_bit(wIndex, &ehci->port_c_suspend))
+			status |= USB_PORT_STAT_C_SUSPEND << 16;
+
+		if (status & ~0xffff)	/* only if wPortChange is interesting */
+			dbg_port(ehci, "GetStatus", wIndex + 1, temp);
+		put_unaligned_le32(status, buf);
+		break;
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* no hub-wide feature/status flags */
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetPortFeature:
+		selector = wIndex >> 8;
+		wIndex &= 0xff;
+		if (unlikely(ehci->debug)) {
+			/* If the debug port is active any port
+			 * feature requests should get denied */
+			if (wIndex == HCS_DEBUG_PORT(ehci->hcs_params) &&
+			    (readl(&ehci->debug->control) & DBGP_ENABLED)) {
+				retval = -ENODEV;
+				goto error_exit;
+			}
+		}
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		temp = ehci_readl(ehci, status_reg);
+		if (temp & PORT_OWNER)
+			break;
+
+		temp &= ~PORT_RWC_BITS;
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			if (ehci->no_selective_suspend)
+				break;
+			if ((temp & PORT_PE) == 0
+					|| (temp & PORT_RESET) != 0)
+				goto error;
+
+			/* After above check the port must be connected.
+			 * Set appropriate bit thus could put phy into low power
+			 * mode if we have tdi_phy_lpm feature
+			 */
+			temp &= ~PORT_WKCONN_E;
+			temp |= PORT_WKDISC_E | PORT_WKOC_E;
+			ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+			if (ehci->has_tdi_phy_lpm) {
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				msleep(5);/* 5ms for HCD enter low pwr mode */
+				spin_lock_irqsave(&ehci->lock, flags);
+				temp1 = ehci_readl(ehci, hostpc_reg);
+				ehci_writel(ehci, temp1 | HOSTPC_PHCD,
+					hostpc_reg);
+				temp1 = ehci_readl(ehci, hostpc_reg);
+				ehci_dbg(ehci, "Port%d phy low pwr mode %s\n",
+					wIndex, (temp1 & HOSTPC_PHCD) ?
+					"succeeded" : "failed");
+			}
+			if (ehci_has_fsl_susp_errata(ehci)) {
+				/* 10ms for HCD enter suspend */
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				usleep_range(10000, 20000);
+				spin_lock_irqsave(&ehci->lock, flags);
+			}
+			set_bit(wIndex, &ehci->suspended_ports);
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (HCS_PPC(ehci->hcs_params)) {
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				ehci_port_power(ehci, wIndex, true);
+				spin_lock_irqsave(&ehci->lock, flags);
+			}
+			break;
+		case USB_PORT_FEAT_RESET:
+			if (temp & (PORT_SUSPEND|PORT_RESUME))
+				goto error;
+			/* line status bits may report this as low speed,
+			 * which can be fine if this root hub has a
+			 * transaction translator built in.
+			 */
+			if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
+					&& !ehci_is_TDI(ehci)
+					&& PORT_USB11 (temp)) {
+				ehci_dbg (ehci,
+					"port %d low speed --> companion\n",
+					wIndex + 1);
+				temp |= PORT_OWNER;
+			} else {
+				temp |= PORT_RESET;
+				temp &= ~PORT_PE;
+
+				/*
+				 * caller must wait, then call GetPortStatus
+				 * usb 2.0 spec says 50 ms resets on root
+				 */
+				ehci->reset_done [wIndex] = jiffies
+						+ msecs_to_jiffies (50);
+
+				/*
+				 * Force full-speed connect for FSL high-speed
+				 * erratum; disable HS Chirp by setting PFSC bit
+				 */
+				if (ehci_has_fsl_hs_errata(ehci))
+					temp |= (1 << PORTSC_FSL_PFSC);
+			}
+			ehci_writel(ehci, temp, status_reg);
+			break;
+
+		/* For downstream facing ports (these):  one hub port is put
+		 * into test mode according to USB2 11.24.2.13, then the hub
+		 * must be reset (which for root hub now means rmmod+modprobe,
+		 * or else system reboot).  See EHCI 2.3.9 and 4.14 for info
+		 * about the EHCI-specific stuff.
+		 */
+		case USB_PORT_FEAT_TEST:
+#ifdef CONFIG_USB_HCD_TEST_MODE
+			if (selector == EHSET_TEST_SINGLE_STEP_SET_FEATURE) {
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				retval = ehset_single_step_set_feature(hcd,
+								wIndex + 1);
+				spin_lock_irqsave(&ehci->lock, flags);
+				break;
+			}
+#endif
+			if (!selector || selector > 5)
+				goto error;
+			spin_unlock_irqrestore(&ehci->lock, flags);
+			ehci_quiesce(ehci);
+			spin_lock_irqsave(&ehci->lock, flags);
+
+			/* Put all enabled ports into suspend */
+			while (ports--) {
+				u32 __iomem *sreg =
+						&ehci->regs->port_status[ports];
+
+				temp = ehci_readl(ehci, sreg) & ~PORT_RWC_BITS;
+				if (temp & PORT_PE)
+					ehci_writel(ehci, temp | PORT_SUSPEND,
+							sreg);
+			}
+
+			spin_unlock_irqrestore(&ehci->lock, flags);
+			ehci_halt(ehci);
+			spin_lock_irqsave(&ehci->lock, flags);
+
+			temp = ehci_readl(ehci, status_reg);
+			temp |= selector << 16;
+			ehci_writel(ehci, temp, status_reg);
+			break;
+
+		default:
+			goto error;
+		}
+		ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
+		break;
+
+	default:
+error:
+		/* "stall" on error */
+		retval = -EPIPE;
+	}
+error_exit:
+	spin_unlock_irqrestore (&ehci->lock, flags);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(ehci_hub_control);
+
+static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+
+	if (ehci_is_TDI(ehci))
+		return;
+	set_owner(ehci, --portnum, PORT_OWNER);
+}
+
+static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	u32 __iomem		*reg;
+
+	if (ehci_is_TDI(ehci))
+		return 0;
+	reg = &ehci->regs->port_status[portnum - 1];
+	return ehci_readl(ehci, reg) & PORT_OWNER;
+}
+
+static int ehci_port_power(struct ehci_hcd *ehci, int portnum, bool enable)
+{
+	struct usb_hcd *hcd = ehci_to_hcd(ehci);
+	u32 __iomem *status_reg = &ehci->regs->port_status[portnum];
+	u32 temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS;
+
+	if (enable)
+		ehci_writel(ehci, temp | PORT_POWER, status_reg);
+	else
+		ehci_writel(ehci, temp & ~PORT_POWER, status_reg);
+
+	if (hcd->driver->port_power)
+		hcd->driver->port_power(hcd, portnum, enable);
+
+	return 0;
+}
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
new file mode 100644
index 000000000..4c6c08b67
--- /dev/null
+++ b/drivers/usb/host/ehci-mem.c
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2001 by David Brownell
+ */
+
+/* this file is part of ehci-hcd.c */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * There's basically three types of memory:
+ *	- data used only by the HCD ... kmalloc is fine
+ *	- async and periodic schedules, shared by HC and HCD ... these
+ *	  need to use dma_pool or dma_alloc_coherent
+ *	- driver buffers, read/written by HC ... single shot DMA mapped
+ *
+ * There's also "register" data (e.g. PCI or SOC), which is memory mapped.
+ * No memory seen by this driver is pageable.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* Allocate the key transfer structures from the previously allocated pool */
+
+static inline void ehci_qtd_init(struct ehci_hcd *ehci, struct ehci_qtd *qtd,
+				  dma_addr_t dma)
+{
+	memset (qtd, 0, sizeof *qtd);
+	qtd->qtd_dma = dma;
+	qtd->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
+	qtd->hw_next = EHCI_LIST_END(ehci);
+	qtd->hw_alt_next = EHCI_LIST_END(ehci);
+	INIT_LIST_HEAD (&qtd->qtd_list);
+}
+
+static struct ehci_qtd *ehci_qtd_alloc (struct ehci_hcd *ehci, gfp_t flags)
+{
+	struct ehci_qtd		*qtd;
+	dma_addr_t		dma;
+
+	qtd = dma_pool_alloc (ehci->qtd_pool, flags, &dma);
+	if (qtd != NULL) {
+		ehci_qtd_init(ehci, qtd, dma);
+	}
+	return qtd;
+}
+
+static inline void ehci_qtd_free (struct ehci_hcd *ehci, struct ehci_qtd *qtd)
+{
+	dma_pool_free (ehci->qtd_pool, qtd, qtd->qtd_dma);
+}
+
+
+static void qh_destroy(struct ehci_hcd *ehci, struct ehci_qh *qh)
+{
+	/* clean qtds first, and know this is not linked */
+	if (!list_empty (&qh->qtd_list) || qh->qh_next.ptr) {
+		ehci_dbg (ehci, "unused qh not empty!\n");
+		BUG ();
+	}
+	if (qh->dummy)
+		ehci_qtd_free (ehci, qh->dummy);
+	dma_pool_free(ehci->qh_pool, qh->hw, qh->qh_dma);
+	kfree(qh);
+}
+
+static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, gfp_t flags)
+{
+	struct ehci_qh		*qh;
+	dma_addr_t		dma;
+
+	qh = kzalloc(sizeof *qh, GFP_ATOMIC);
+	if (!qh)
+		goto done;
+	qh->hw = (struct ehci_qh_hw *)
+		dma_pool_zalloc(ehci->qh_pool, flags, &dma);
+	if (!qh->hw)
+		goto fail;
+	qh->qh_dma = dma;
+	// INIT_LIST_HEAD (&qh->qh_list);
+	INIT_LIST_HEAD (&qh->qtd_list);
+	INIT_LIST_HEAD(&qh->unlink_node);
+
+	/* dummy td enables safe urb queuing */
+	qh->dummy = ehci_qtd_alloc (ehci, flags);
+	if (qh->dummy == NULL) {
+		ehci_dbg (ehci, "no dummy td\n");
+		goto fail1;
+	}
+done:
+	return qh;
+fail1:
+	dma_pool_free(ehci->qh_pool, qh->hw, qh->qh_dma);
+fail:
+	kfree(qh);
+	return NULL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* The queue heads and transfer descriptors are managed from pools tied
+ * to each of the "per device" structures.
+ * This is the initialisation and cleanup code.
+ */
+
+static void ehci_mem_cleanup (struct ehci_hcd *ehci)
+{
+	if (ehci->async)
+		qh_destroy(ehci, ehci->async);
+	ehci->async = NULL;
+
+	if (ehci->dummy)
+		qh_destroy(ehci, ehci->dummy);
+	ehci->dummy = NULL;
+
+	/* DMA consistent memory and pools */
+	dma_pool_destroy(ehci->qtd_pool);
+	ehci->qtd_pool = NULL;
+	dma_pool_destroy(ehci->qh_pool);
+	ehci->qh_pool = NULL;
+	dma_pool_destroy(ehci->itd_pool);
+	ehci->itd_pool = NULL;
+	dma_pool_destroy(ehci->sitd_pool);
+	ehci->sitd_pool = NULL;
+
+	if (ehci->periodic)
+		dma_free_coherent(ehci_to_hcd(ehci)->self.sysdev,
+			ehci->periodic_size * sizeof (u32),
+			ehci->periodic, ehci->periodic_dma);
+	ehci->periodic = NULL;
+
+	/* shadow periodic table */
+	kfree(ehci->pshadow);
+	ehci->pshadow = NULL;
+}
+
+/* remember to add cleanup code (above) if you add anything here */
+static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags)
+{
+	int i;
+
+	/* QTDs for control/bulk/intr transfers */
+	ehci->qtd_pool = dma_pool_create ("ehci_qtd",
+			ehci_to_hcd(ehci)->self.sysdev,
+			sizeof (struct ehci_qtd),
+			32 /* byte alignment (for hw parts) */,
+			4096 /* can't cross 4K */);
+	if (!ehci->qtd_pool) {
+		goto fail;
+	}
+
+	/* QHs for control/bulk/intr transfers */
+	ehci->qh_pool = dma_pool_create ("ehci_qh",
+			ehci_to_hcd(ehci)->self.sysdev,
+			sizeof(struct ehci_qh_hw),
+			32 /* byte alignment (for hw parts) */,
+			4096 /* can't cross 4K */);
+	if (!ehci->qh_pool) {
+		goto fail;
+	}
+	ehci->async = ehci_qh_alloc (ehci, flags);
+	if (!ehci->async) {
+		goto fail;
+	}
+
+	/* ITD for high speed ISO transfers */
+	ehci->itd_pool = dma_pool_create ("ehci_itd",
+			ehci_to_hcd(ehci)->self.sysdev,
+			sizeof (struct ehci_itd),
+			32 /* byte alignment (for hw parts) */,
+			4096 /* can't cross 4K */);
+	if (!ehci->itd_pool) {
+		goto fail;
+	}
+
+	/* SITD for full/low speed split ISO transfers */
+	ehci->sitd_pool = dma_pool_create ("ehci_sitd",
+			ehci_to_hcd(ehci)->self.sysdev,
+			sizeof (struct ehci_sitd),
+			32 /* byte alignment (for hw parts) */,
+			4096 /* can't cross 4K */);
+	if (!ehci->sitd_pool) {
+		goto fail;
+	}
+
+	/* Hardware periodic table */
+	ehci->periodic = (__le32 *)
+		dma_alloc_coherent(ehci_to_hcd(ehci)->self.sysdev,
+			ehci->periodic_size * sizeof(__le32),
+			&ehci->periodic_dma, flags);
+	if (ehci->periodic == NULL) {
+		goto fail;
+	}
+
+	if (ehci->use_dummy_qh) {
+		struct ehci_qh_hw	*hw;
+		ehci->dummy = ehci_qh_alloc(ehci, flags);
+		if (!ehci->dummy)
+			goto fail;
+
+		hw = ehci->dummy->hw;
+		hw->hw_next = EHCI_LIST_END(ehci);
+		hw->hw_qtd_next = EHCI_LIST_END(ehci);
+		hw->hw_alt_next = EHCI_LIST_END(ehci);
+		ehci->dummy->hw = hw;
+
+		for (i = 0; i < ehci->periodic_size; i++)
+			ehci->periodic[i] = cpu_to_hc32(ehci,
+					ehci->dummy->qh_dma);
+	} else {
+		for (i = 0; i < ehci->periodic_size; i++)
+			ehci->periodic[i] = EHCI_LIST_END(ehci);
+	}
+
+	/* software shadow of hardware table */
+	ehci->pshadow = kcalloc(ehci->periodic_size, sizeof(void *), flags);
+	if (ehci->pshadow != NULL)
+		return 0;
+
+fail:
+	ehci_dbg (ehci, "couldn't init memory\n");
+	ehci_mem_cleanup (ehci);
+	return -ENOMEM;
+}
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
new file mode 100644
index 000000000..fa46d217d
--- /dev/null
+++ b/drivers/usb/host/ehci-mv.c
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ * Author: Chao Xie <chao.xie@marvell.com>
+ *        Neil Zhang <zhangwm@marvell.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/of.h>
+#include <linux/platform_data/mv_usb.h>
+#include <linux/io.h>
+
+#include <linux/usb/hcd.h>
+
+#include "ehci.h"
+
+/* registers */
+#define U2x_CAPREGS_OFFSET       0x100
+
+#define CAPLENGTH_MASK         (0xff)
+
+#define hcd_to_ehci_hcd_mv(h) ((struct ehci_hcd_mv *)hcd_to_ehci(h)->priv)
+
+struct ehci_hcd_mv {
+	/* Which mode does this ehci running OTG/Host ? */
+	int mode;
+
+	void __iomem *base;
+	void __iomem *cap_regs;
+	void __iomem *op_regs;
+
+	struct usb_phy *otg;
+	struct clk *clk;
+
+	struct phy *phy;
+
+	int (*set_vbus)(unsigned int vbus);
+};
+
+static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
+{
+	int retval;
+
+	retval = clk_prepare_enable(ehci_mv->clk);
+	if (retval)
+		return retval;
+
+	retval = phy_init(ehci_mv->phy);
+	if (retval)
+		clk_disable_unprepare(ehci_mv->clk);
+
+	return retval;
+}
+
+static void mv_ehci_disable(struct ehci_hcd_mv *ehci_mv)
+{
+	phy_exit(ehci_mv->phy);
+	clk_disable_unprepare(ehci_mv->clk);
+}
+
+static int mv_ehci_reset(struct usb_hcd *hcd)
+{
+	struct device *dev = hcd->self.controller;
+	struct ehci_hcd_mv *ehci_mv = hcd_to_ehci_hcd_mv(hcd);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	u32 status;
+	int retval;
+
+	if (ehci_mv == NULL) {
+		dev_err(dev, "Can not find private ehci data\n");
+		return -ENODEV;
+	}
+
+	hcd->has_tt = 1;
+
+	retval = ehci_setup(hcd);
+	if (retval)
+		dev_err(dev, "ehci_setup failed %d\n", retval);
+
+	if (of_usb_get_phy_mode(dev->of_node) == USBPHY_INTERFACE_MODE_HSIC) {
+		status = ehci_readl(ehci, &ehci->regs->port_status[0]);
+		status |= PORT_TEST_FORCE;
+		ehci_writel(ehci, status, &ehci->regs->port_status[0]);
+		status &= ~PORT_TEST_FORCE;
+		ehci_writel(ehci, status, &ehci->regs->port_status[0]);
+	}
+
+	return retval;
+}
+
+static struct hc_driver __read_mostly ehci_platform_hc_driver;
+
+static const struct ehci_driver_overrides platform_overrides __initconst = {
+	.reset =		mv_ehci_reset,
+	.extra_priv_size =	sizeof(struct ehci_hcd_mv),
+};
+
+static int mv_ehci_probe(struct platform_device *pdev)
+{
+	struct mv_usb_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct usb_hcd *hcd;
+	struct ehci_hcd *ehci;
+	struct ehci_hcd_mv *ehci_mv;
+	struct resource *r;
+	int retval;
+	u32 offset;
+	u32 status;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	hcd = usb_create_hcd(&ehci_platform_hc_driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, hcd);
+	ehci_mv = hcd_to_ehci_hcd_mv(hcd);
+
+	ehci_mv->mode = MV_USB_MODE_HOST;
+	if (pdata) {
+		ehci_mv->mode = pdata->mode;
+		ehci_mv->set_vbus = pdata->set_vbus;
+	}
+
+	ehci_mv->phy = devm_phy_optional_get(&pdev->dev, "usb");
+	if (IS_ERR(ehci_mv->phy)) {
+		retval = PTR_ERR(ehci_mv->phy);
+		if (retval != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get phy.\n");
+		goto err_put_hcd;
+	}
+
+	ehci_mv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ehci_mv->clk)) {
+		dev_err(&pdev->dev, "error getting clock\n");
+		retval = PTR_ERR(ehci_mv->clk);
+		goto err_put_hcd;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ehci_mv->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(ehci_mv->base)) {
+		retval = PTR_ERR(ehci_mv->base);
+		goto err_put_hcd;
+	}
+
+	retval = mv_ehci_enable(ehci_mv);
+	if (retval) {
+		dev_err(&pdev->dev, "init phy error %d\n", retval);
+		goto err_put_hcd;
+	}
+
+	ehci_mv->cap_regs =
+		(void __iomem *) ((unsigned long) ehci_mv->base + U2x_CAPREGS_OFFSET);
+	offset = readl(ehci_mv->cap_regs) & CAPLENGTH_MASK;
+	ehci_mv->op_regs =
+		(void __iomem *) ((unsigned long) ehci_mv->cap_regs + offset);
+
+	hcd->rsrc_start = r->start;
+	hcd->rsrc_len = resource_size(r);
+	hcd->regs = ehci_mv->op_regs;
+
+	retval = platform_get_irq(pdev, 0);
+	if (retval < 0)
+		goto err_disable_clk;
+	hcd->irq = retval;
+
+	ehci = hcd_to_ehci(hcd);
+	ehci->caps = (struct ehci_caps __iomem *) ehci_mv->cap_regs;
+
+	if (ehci_mv->mode == MV_USB_MODE_OTG) {
+		ehci_mv->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
+		if (IS_ERR(ehci_mv->otg)) {
+			retval = PTR_ERR(ehci_mv->otg);
+
+			if (retval == -ENXIO)
+				dev_info(&pdev->dev, "MV_USB_MODE_OTG "
+						"must have CONFIG_USB_PHY enabled\n");
+			else
+				dev_err(&pdev->dev,
+						"unable to find transceiver\n");
+			goto err_disable_clk;
+		}
+
+		retval = otg_set_host(ehci_mv->otg->otg, &hcd->self);
+		if (retval < 0) {
+			dev_err(&pdev->dev,
+				"unable to register with transceiver\n");
+			retval = -ENODEV;
+			goto err_disable_clk;
+		}
+		/* otg will enable clock before use as host */
+		mv_ehci_disable(ehci_mv);
+	} else {
+		if (ehci_mv->set_vbus)
+			ehci_mv->set_vbus(1);
+
+		retval = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
+		if (retval) {
+			dev_err(&pdev->dev,
+				"failed to add hcd with err %d\n", retval);
+			goto err_set_vbus;
+		}
+		device_wakeup_enable(hcd->self.controller);
+	}
+
+	if (of_usb_get_phy_mode(pdev->dev.of_node) == USBPHY_INTERFACE_MODE_HSIC) {
+		status = ehci_readl(ehci, &ehci->regs->port_status[0]);
+		/* These "reserved" bits actually enable HSIC mode. */
+		status |= BIT(25);
+		status &= ~GENMASK(31, 30);
+		ehci_writel(ehci, status, &ehci->regs->port_status[0]);
+	}
+
+	dev_info(&pdev->dev,
+		 "successful find EHCI device with regs 0x%p irq %d"
+		 " working in %s mode\n", hcd->regs, hcd->irq,
+		 ehci_mv->mode == MV_USB_MODE_OTG ? "OTG" : "Host");
+
+	return 0;
+
+err_set_vbus:
+	if (ehci_mv->set_vbus)
+		ehci_mv->set_vbus(0);
+err_disable_clk:
+	mv_ehci_disable(ehci_mv);
+err_put_hcd:
+	usb_put_hcd(hcd);
+
+	return retval;
+}
+
+static int mv_ehci_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ehci_hcd_mv *ehci_mv = hcd_to_ehci_hcd_mv(hcd);
+
+	if (hcd->rh_registered)
+		usb_remove_hcd(hcd);
+
+	if (!IS_ERR_OR_NULL(ehci_mv->otg))
+		otg_set_host(ehci_mv->otg->otg, NULL);
+
+	if (ehci_mv->mode == MV_USB_MODE_HOST) {
+		if (ehci_mv->set_vbus)
+			ehci_mv->set_vbus(0);
+
+		mv_ehci_disable(ehci_mv);
+	}
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+static const struct platform_device_id ehci_id_table[] = {
+	{"pxa-u2oehci", 0},
+	{"pxa-sph", 0},
+	{},
+};
+
+static void mv_ehci_shutdown(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	if (!hcd->rh_registered)
+		return;
+
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
+}
+
+static const struct of_device_id ehci_mv_dt_ids[] = {
+	{ .compatible = "marvell,pxau2o-ehci", },
+	{},
+};
+
+static struct platform_driver ehci_mv_driver = {
+	.probe = mv_ehci_probe,
+	.remove = mv_ehci_remove,
+	.shutdown = mv_ehci_shutdown,
+	.driver = {
+		.name = "mv-ehci",
+		.bus = &platform_bus_type,
+		.of_match_table = ehci_mv_dt_ids,
+	},
+	.id_table = ehci_id_table,
+};
+
+static int __init ehci_platform_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides);
+	return platform_driver_register(&ehci_mv_driver);
+}
+module_init(ehci_platform_init);
+
+static void __exit ehci_platform_cleanup(void)
+{
+	platform_driver_unregister(&ehci_mv_driver);
+}
+module_exit(ehci_platform_cleanup);
+
+MODULE_DESCRIPTION("Marvell EHCI driver");
+MODULE_AUTHOR("Chao Xie <chao.xie@marvell.com>");
+MODULE_AUTHOR("Neil Zhang <zhangwm@marvell.com>");
+MODULE_ALIAS("mv-ehci");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, ehci_mv_dt_ids);
diff --git a/drivers/usb/host/ehci-npcm7xx.c b/drivers/usb/host/ehci-npcm7xx.c
new file mode 100644
index 000000000..63af1a827
--- /dev/null
+++ b/drivers/usb/host/ehci-npcm7xx.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Nuvoton NPCM7xx driver for EHCI HCD
+ *
+ * Copyright (C) 2018 Nuvoton Technologies,
+ * Avi Fishman <avi.fishman@nuvoton.com> <avifishman70@gmail.com>
+ * Tomer Maimon <tomer.maimon@nuvoton.com> <tmaimon77@gmail.com>
+ *
+ * Based on various ehci-spear.c driver
+ */
+
+
+#include <linux/dma-mapping.h>
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ehci.h"
+
+#define DRIVER_DESC "EHCI npcm7xx driver"
+
+static struct hc_driver __read_mostly ehci_npcm7xx_hc_driver;
+
+static int __maybe_unused ehci_npcm7xx_drv_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	bool do_wakeup = device_may_wakeup(dev);
+
+	return ehci_suspend(hcd, do_wakeup);
+}
+
+static int __maybe_unused ehci_npcm7xx_drv_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	ehci_resume(hcd, false);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ehci_npcm7xx_pm_ops, ehci_npcm7xx_drv_suspend,
+		ehci_npcm7xx_drv_resume);
+
+static int npcm7xx_ehci_hcd_drv_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct resource *res;
+	const struct hc_driver *driver = &ehci_npcm7xx_hc_driver;
+	int irq;
+	int retval;
+
+	dev_dbg(&pdev->dev,	"initializing npcm7xx ehci USB Controller\n");
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		retval = irq;
+		goto fail;
+	}
+
+	/*
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	retval = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (retval)
+		goto fail;
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto fail;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(hcd->regs)) {
+		retval = PTR_ERR(hcd->regs);
+		goto err_put_hcd;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	/* registers start at offset 0x0 */
+	hcd_to_ehci(hcd)->caps = hcd->regs;
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval)
+		goto err_put_hcd;
+
+	device_wakeup_enable(hcd->self.controller);
+	return retval;
+
+err_put_hcd:
+	usb_put_hcd(hcd);
+fail:
+	dev_err(&pdev->dev, "init fail, %d\n", retval);
+
+	return retval;
+}
+
+static int npcm7xx_ehci_hcd_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+static const struct of_device_id npcm7xx_ehci_id_table[] = {
+	{ .compatible = "nuvoton,npcm750-ehci" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, npcm7xx_ehci_id_table);
+
+static struct platform_driver npcm7xx_ehci_hcd_driver = {
+	.probe		= npcm7xx_ehci_hcd_drv_probe,
+	.remove		= npcm7xx_ehci_hcd_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name = "npcm7xx-ehci",
+		.bus = &platform_bus_type,
+		.pm = pm_ptr(&ehci_npcm7xx_pm_ops),
+		.of_match_table = npcm7xx_ehci_id_table,
+	}
+};
+
+static int __init ehci_npcm7xx_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ehci_init_driver(&ehci_npcm7xx_hc_driver, NULL);
+	return platform_driver_register(&npcm7xx_ehci_hcd_driver);
+}
+module_init(ehci_npcm7xx_init);
+
+static void __exit ehci_npcm7xx_cleanup(void)
+{
+	platform_driver_unregister(&npcm7xx_ehci_hcd_driver);
+}
+module_exit(ehci_npcm7xx_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_ALIAS("platform:npcm7xx-ehci");
+MODULE_AUTHOR("Avi Fishman");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
new file mode 100644
index 000000000..7dd984722
--- /dev/null
+++ b/drivers/usb/host/ehci-omap.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ehci-omap.c - driver for USBHOST on OMAP3/4 processors
+ *
+ * Bus Glue for the EHCI controllers in OMAP3/4
+ * Tested on several OMAP3 boards, and OMAP4 Pandaboard
+ *
+ * Copyright (C) 2007-2013 Texas Instruments, Inc.
+ *	Author: Vikram Pandita <vikram.pandita@ti.com>
+ *	Author: Anand Gadiyar <gadiyar@ti.com>
+ *	Author: Keshava Munegowda <keshava_mgowda@ti.com>
+ *	Author: Roger Quadros <rogerq@ti.com>
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *	Contact: Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/usb/ulpi.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/of.h>
+#include <linux/dma-mapping.h>
+
+#include "ehci.h"
+
+#include <linux/platform_data/usb-omap.h>
+
+/* EHCI Register Set */
+#define EHCI_INSNREG04					(0xA0)
+#define EHCI_INSNREG04_DISABLE_UNSUSPEND		(1 << 5)
+#define	EHCI_INSNREG05_ULPI				(0xA4)
+#define	EHCI_INSNREG05_ULPI_CONTROL_SHIFT		31
+#define	EHCI_INSNREG05_ULPI_PORTSEL_SHIFT		24
+#define	EHCI_INSNREG05_ULPI_OPSEL_SHIFT			22
+#define	EHCI_INSNREG05_ULPI_REGADD_SHIFT		16
+#define	EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT		8
+#define	EHCI_INSNREG05_ULPI_WRDATA_SHIFT		0
+
+#define DRIVER_DESC "OMAP-EHCI Host Controller driver"
+
+static const char hcd_name[] = "ehci-omap";
+
+/*-------------------------------------------------------------------------*/
+
+struct omap_hcd {
+	struct usb_phy *phy[OMAP3_HS_USB_PORTS]; /* one PHY for each port */
+	int nports;
+};
+
+static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
+{
+	__raw_writel(val, base + reg);
+}
+
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
+
+static struct hc_driver __read_mostly ehci_omap_hc_driver;
+
+static const struct ehci_driver_overrides ehci_omap_overrides __initconst = {
+	.extra_priv_size = sizeof(struct omap_hcd),
+};
+
+/**
+ * ehci_hcd_omap_probe - initialize TI-based HCDs
+ * @pdev: Pointer to this platform device's information
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ */
+static int ehci_hcd_omap_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev);
+	struct resource	*res;
+	struct usb_hcd	*hcd;
+	void __iomem *regs;
+	int ret;
+	int irq;
+	int i;
+	struct omap_hcd	*omap;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	if (!dev->parent) {
+		dev_err(dev, "Missing parent device\n");
+		return -ENODEV;
+	}
+
+	/* For DT boot, get platform data from parent. i.e. usbhshost */
+	if (dev->of_node) {
+		pdata = dev_get_platdata(dev->parent);
+		dev->platform_data = pdata;
+	}
+
+	if (!pdata) {
+		dev_err(dev, "Missing platform data\n");
+		return -ENODEV;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	res =  platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	/*
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	ret = -ENODEV;
+	hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
+			dev_name(dev));
+	if (!hcd) {
+		dev_err(dev, "Failed to create HCD\n");
+		return -ENOMEM;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+	hcd->regs = regs;
+	hcd_to_ehci(hcd)->caps = regs;
+
+	omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
+	omap->nports = pdata->nports;
+
+	platform_set_drvdata(pdev, hcd);
+
+	/* get the PHY devices if needed */
+	for (i = 0 ; i < omap->nports ; i++) {
+		struct usb_phy *phy;
+
+		/* get the PHY device */
+		phy = devm_usb_get_phy_by_phandle(dev, "phys", i);
+		if (IS_ERR(phy)) {
+			ret = PTR_ERR(phy);
+			if (ret == -ENODEV) { /* no PHY */
+				phy = NULL;
+				continue;
+			}
+
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "Can't get PHY for port %d: %d\n",
+					i, ret);
+			goto err_phy;
+		}
+
+		omap->phy[i] = phy;
+
+		if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY) {
+			usb_phy_init(omap->phy[i]);
+			/* bring PHY out of suspend */
+			usb_phy_set_suspend(omap->phy[i], 0);
+		}
+	}
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	/*
+	 * An undocumented "feature" in the OMAP3 EHCI controller,
+	 * causes suspended ports to be taken out of suspend when
+	 * the USBCMD.Run/Stop bit is cleared (for example when
+	 * we do ehci_bus_suspend).
+	 * This breaks suspend-resume if the root-hub is allowed
+	 * to suspend. Writing 1 to this undocumented register bit
+	 * disables this feature and restores normal behavior.
+	 */
+	ehci_write(regs, EHCI_INSNREG04,
+				EHCI_INSNREG04_DISABLE_UNSUSPEND);
+
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (ret) {
+		dev_err(dev, "failed to add hcd with err %d\n", ret);
+		goto err_pm_runtime;
+	}
+	device_wakeup_enable(hcd->self.controller);
+
+	/*
+	 * Bring PHYs out of reset for non PHY modes.
+	 * Even though HSIC mode is a PHY-less mode, the reset
+	 * line exists between the chips and can be modelled
+	 * as a PHY device for reset control.
+	 */
+	for (i = 0; i < omap->nports; i++) {
+		if (!omap->phy[i] ||
+		     pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY)
+			continue;
+
+		usb_phy_init(omap->phy[i]);
+		/* bring PHY out of suspend */
+		usb_phy_set_suspend(omap->phy[i], 0);
+	}
+
+	return 0;
+
+err_pm_runtime:
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+
+err_phy:
+	for (i = 0; i < omap->nports; i++) {
+		if (omap->phy[i])
+			usb_phy_shutdown(omap->phy[i]);
+	}
+
+	usb_put_hcd(hcd);
+
+	return ret;
+}
+
+
+/**
+ * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs
+ * @pdev: USB Host Controller being removed
+ *
+ * Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ */
+static int ehci_hcd_omap_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
+	int i;
+
+	usb_remove_hcd(hcd);
+
+	for (i = 0; i < omap->nports; i++) {
+		if (omap->phy[i])
+			usb_phy_shutdown(omap->phy[i]);
+	}
+
+	usb_put_hcd(hcd);
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+
+	return 0;
+}
+
+static const struct of_device_id omap_ehci_dt_ids[] = {
+	{ .compatible = "ti,ehci-omap" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, omap_ehci_dt_ids);
+
+static struct platform_driver ehci_hcd_omap_driver = {
+	.probe			= ehci_hcd_omap_probe,
+	.remove			= ehci_hcd_omap_remove,
+	.shutdown		= usb_hcd_platform_shutdown,
+	/*.suspend		= ehci_hcd_omap_suspend, */
+	/*.resume		= ehci_hcd_omap_resume, */
+	.driver = {
+		.name		= hcd_name,
+		.of_match_table = omap_ehci_dt_ids,
+	}
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init ehci_omap_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides);
+	return platform_driver_register(&ehci_hcd_omap_driver);
+}
+module_init(ehci_omap_init);
+
+static void __exit ehci_omap_cleanup(void)
+{
+	platform_driver_unregister(&ehci_hcd_omap_driver);
+}
+module_exit(ehci_omap_cleanup);
+
+MODULE_ALIAS("platform:ehci-omap");
+MODULE_AUTHOR("Texas Instruments, Inc.");
+MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
+MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
new file mode 100644
index 000000000..a3454a3ea
--- /dev/null
+++ b/drivers/usb/host/ehci-orion.c
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * drivers/usb/host/ehci-orion.c
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mbus.h>
+#include <linux/clk.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+
+#include "ehci.h"
+
+#define rdl(off)	readl_relaxed(hcd->regs + (off))
+#define wrl(off, val)	writel_relaxed((val), hcd->regs + (off))
+
+#define USB_CMD			0x140
+#define   USB_CMD_RUN		BIT(0)
+#define   USB_CMD_RESET		BIT(1)
+#define USB_MODE		0x1a8
+#define   USB_MODE_MASK		GENMASK(1, 0)
+#define   USB_MODE_DEVICE	0x2
+#define   USB_MODE_HOST		0x3
+#define   USB_MODE_SDIS		BIT(4)
+#define USB_CAUSE		0x310
+#define USB_MASK		0x314
+#define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
+#define USB_WINDOW_BASE(i)	(0x324 + ((i) << 4))
+#define USB_IPG			0x360
+#define USB_PHY_PWR_CTRL	0x400
+#define USB_PHY_TX_CTRL		0x420
+#define USB_PHY_RX_CTRL		0x430
+#define USB_PHY_IVREF_CTRL	0x440
+#define USB_PHY_TST_GRP_CTRL	0x450
+
+#define USB_SBUSCFG		0x90
+
+/* BAWR = BARD = 3 : Align read/write bursts packets larger than 128 bytes */
+#define USB_SBUSCFG_BAWR_ALIGN_128B	(0x3 << 6)
+#define USB_SBUSCFG_BARD_ALIGN_128B	(0x3 << 3)
+/* AHBBRST = 3	   : Align AHB Burst to INCR16 (64 bytes) */
+#define USB_SBUSCFG_AHBBRST_INCR16	(0x3 << 0)
+
+#define USB_SBUSCFG_DEF_VAL (USB_SBUSCFG_BAWR_ALIGN_128B	\
+			     | USB_SBUSCFG_BARD_ALIGN_128B	\
+			     | USB_SBUSCFG_AHBBRST_INCR16)
+
+#define DRIVER_DESC "EHCI orion driver"
+
+#define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv)
+
+struct orion_ehci_hcd {
+	struct clk *clk;
+	struct phy *phy;
+};
+
+static struct hc_driver __read_mostly ehci_orion_hc_driver;
+
+/*
+ * Implement Orion USB controller specification guidelines
+ */
+static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
+{
+	/* The below GLs are according to the Orion Errata document */
+	/*
+	 * Clear interrupt cause and mask
+	 */
+	wrl(USB_CAUSE, 0);
+	wrl(USB_MASK, 0);
+
+	/*
+	 * Reset controller
+	 */
+	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
+	while (rdl(USB_CMD) & USB_CMD_RESET);
+
+	/*
+	 * GL# USB-10: Set IPG for non start of frame packets
+	 * Bits[14:8]=0xc
+	 */
+	wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
+
+	/*
+	 * GL# USB-9: USB 2.0 Power Control
+	 * BG_VSEL[7:6]=0x1
+	 */
+	wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
+
+	/*
+	 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
+	 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
+	 */
+	wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
+
+	/*
+	 * GL# USB-3 GL# USB-9: USB PHY Rx Control
+	 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
+	 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
+	 */
+	wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
+
+	/*
+	 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
+	 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
+	 */
+	wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
+
+	/*
+	 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
+	 * REG_FIFO_SQ_RST[15]=0
+	 */
+	wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
+
+	/*
+	 * Stop and reset controller
+	 */
+	wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN);
+	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
+	while (rdl(USB_CMD) & USB_CMD_RESET);
+
+	/*
+	 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
+	 * TBD: This need to be done after each reset!
+	 * GL# USB-4 Setup USB Host mode
+	 */
+	wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST);
+}
+
+static void
+ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
+			     const struct mbus_dram_target_info *dram)
+{
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		wrl(USB_WINDOW_CTRL(i), 0);
+		wrl(USB_WINDOW_BASE(i), 0);
+	}
+
+	for (i = 0; i < dram->num_cs; i++) {
+		const struct mbus_dram_window *cs = dram->cs + i;
+
+		wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
+					(cs->mbus_attr << 8) |
+					(dram->mbus_dram_target_id << 4) | 1);
+		wrl(USB_WINDOW_BASE(i), cs->base);
+	}
+}
+
+static int ehci_orion_drv_reset(struct usb_hcd *hcd)
+{
+	struct device *dev = hcd->self.controller;
+	int ret;
+
+	ret = ehci_setup(hcd);
+	if (ret)
+		return ret;
+
+	/*
+	 * For SoC without hlock, need to program sbuscfg value to guarantee
+	 * AHB master's burst would not overrun or underrun FIFO.
+	 *
+	 * sbuscfg reg has to be set after usb controller reset, otherwise
+	 * the value would be override to 0.
+	 */
+	if (of_device_is_compatible(dev->of_node, "marvell,armada-3700-ehci"))
+		wrl(USB_SBUSCFG, USB_SBUSCFG_DEF_VAL);
+
+	return ret;
+}
+
+static int __maybe_unused ehci_orion_drv_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	return ehci_suspend(hcd, device_may_wakeup(dev));
+}
+
+static int __maybe_unused ehci_orion_drv_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	return ehci_resume(hcd, false);
+}
+
+static SIMPLE_DEV_PM_OPS(ehci_orion_pm_ops, ehci_orion_drv_suspend,
+			 ehci_orion_drv_resume);
+
+static const struct ehci_driver_overrides orion_overrides __initconst = {
+	.extra_priv_size =	sizeof(struct orion_ehci_hcd),
+	.reset = ehci_orion_drv_reset,
+};
+
+static int ehci_orion_drv_probe(struct platform_device *pdev)
+{
+	struct orion_ehci_data *pd = dev_get_platdata(&pdev->dev);
+	const struct mbus_dram_target_info *dram;
+	struct resource *res;
+	struct usb_hcd *hcd;
+	struct ehci_hcd *ehci;
+	void __iomem *regs;
+	int irq, err;
+	enum orion_ehci_phy_ver phy_version;
+	struct orion_ehci_hcd *priv;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_debug("Initializing Orion-SoC USB Host Controller\n");
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		err = -ENODEV;
+		goto err;
+	}
+
+	/*
+	 * Right now device-tree probed devices don't get dma_mask
+	 * set. Since shared usb code relies on it, set it here for
+	 * now. Once we have dma capability bindings this can go away.
+	 */
+	err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (err)
+		goto err;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(regs)) {
+		err = PTR_ERR(regs);
+		goto err;
+	}
+
+	hcd = usb_create_hcd(&ehci_orion_hc_driver,
+			&pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		err = -ENOMEM;
+		goto err;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+	hcd->regs = regs;
+
+	ehci = hcd_to_ehci(hcd);
+	ehci->caps = hcd->regs + 0x100;
+	hcd->has_tt = 1;
+
+	priv = hcd_to_orion_priv(hcd);
+	/*
+	 * Not all platforms can gate the clock, so it is not an error if
+	 * the clock does not exists.
+	 */
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(priv->clk)) {
+		err = clk_prepare_enable(priv->clk);
+		if (err)
+			goto err_put_hcd;
+	}
+
+	priv->phy = devm_phy_optional_get(&pdev->dev, "usb");
+	if (IS_ERR(priv->phy)) {
+		err = PTR_ERR(priv->phy);
+		if (err != -ENOSYS)
+			goto err_dis_clk;
+	}
+
+	/*
+	 * (Re-)program MBUS remapping windows if we are asked to.
+	 */
+	dram = mv_mbus_dram_info();
+	if (dram)
+		ehci_orion_conf_mbus_windows(hcd, dram);
+
+	/*
+	 * setup Orion USB controller.
+	 */
+	if (pdev->dev.of_node)
+		phy_version = EHCI_PHY_NA;
+	else
+		phy_version = pd->phy_version;
+
+	switch (phy_version) {
+	case EHCI_PHY_NA:	/* dont change USB phy settings */
+		break;
+	case EHCI_PHY_ORION:
+		orion_usb_phy_v1_setup(hcd);
+		break;
+	case EHCI_PHY_DD:
+	case EHCI_PHY_KW:
+	default:
+		dev_warn(&pdev->dev, "USB phy version isn't supported.\n");
+	}
+
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (err)
+		goto err_dis_clk;
+
+	device_wakeup_enable(hcd->self.controller);
+	return 0;
+
+err_dis_clk:
+	if (!IS_ERR(priv->clk))
+		clk_disable_unprepare(priv->clk);
+err_put_hcd:
+	usb_put_hcd(hcd);
+err:
+	dev_err(&pdev->dev, "init %s fail, %d\n",
+		dev_name(&pdev->dev), err);
+
+	return err;
+}
+
+static int ehci_orion_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct orion_ehci_hcd *priv = hcd_to_orion_priv(hcd);
+
+	usb_remove_hcd(hcd);
+
+	if (!IS_ERR(priv->clk))
+		clk_disable_unprepare(priv->clk);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+static const struct of_device_id ehci_orion_dt_ids[] = {
+	{ .compatible = "marvell,orion-ehci", },
+	{ .compatible = "marvell,armada-3700-ehci", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
+
+static struct platform_driver ehci_orion_driver = {
+	.probe		= ehci_orion_drv_probe,
+	.remove		= ehci_orion_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver = {
+		.name	= "orion-ehci",
+		.of_match_table = ehci_orion_dt_ids,
+		.pm = &ehci_orion_pm_ops,
+	},
+};
+
+static int __init ehci_orion_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides);
+	return platform_driver_register(&ehci_orion_driver);
+}
+module_init(ehci_orion_init);
+
+static void __exit ehci_orion_cleanup(void)
+{
+	platform_driver_unregister(&ehci_orion_driver);
+}
+module_exit(ehci_orion_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_ALIAS("platform:orion-ehci");
+MODULE_AUTHOR("Tzachi Perelstein");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
new file mode 100644
index 000000000..17f8b6ea0
--- /dev/null
+++ b/drivers/usb/host/ehci-pci.c
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * EHCI HCD (Host Controller Driver) PCI Bus Glue.
+ *
+ * Copyright (c) 2000-2004 by David Brownell
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ehci.h"
+#include "pci-quirks.h"
+
+#define DRIVER_DESC "EHCI PCI platform driver"
+
+static const char hcd_name[] = "ehci-pci";
+
+/* defined here to avoid adding to pci_ids.h for single instance use */
+#define PCI_DEVICE_ID_INTEL_CE4100_USB	0x2e70
+
+#define PCI_VENDOR_ID_ASPEED		0x1a03
+#define PCI_DEVICE_ID_ASPEED_EHCI	0x2603
+
+/*-------------------------------------------------------------------------*/
+#define PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC		0x0939
+static inline bool is_intel_quark_x1000(struct pci_dev *pdev)
+{
+	return pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		pdev->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC;
+}
+
+/*
+ * This is the list of PCI IDs for the devices that have EHCI USB class and
+ * specific drivers for that. One of the example is a ChipIdea device installed
+ * on some Intel MID platforms.
+ */
+static const struct pci_device_id bypass_pci_id_table[] = {
+	/* ChipIdea on Intel MID platform */
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe006), },
+	{}
+};
+
+static inline bool is_bypassed_id(struct pci_dev *pdev)
+{
+	return !!pci_match_id(bypass_pci_id_table, pdev);
+}
+
+/*
+ * 0x84 is the offset of in/out threshold register,
+ * and it is the same offset as the register of 'hostpc'.
+ */
+#define	intel_quark_x1000_insnreg01	hostpc
+
+/* Maximum usable threshold value is 0x7f dwords for both IN and OUT */
+#define INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD	0x007f007f
+
+/* called after powerup, by probe or system-pm "wakeup" */
+static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
+{
+	int			retval;
+
+	/* we expect static quirk code to handle the "extended capabilities"
+	 * (currently just BIOS handoff) allowed starting with EHCI 0.96
+	 */
+
+	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
+	retval = pci_set_mwi(pdev);
+	if (!retval)
+		ehci_dbg(ehci, "MWI active\n");
+
+	/* Reset the threshold limit */
+	if (is_intel_quark_x1000(pdev)) {
+		/*
+		 * For the Intel QUARK X1000, raise the I/O threshold to the
+		 * maximum usable value in order to improve performance.
+		 */
+		ehci_writel(ehci, INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD,
+			ehci->regs->intel_quark_x1000_insnreg01);
+	}
+
+	return 0;
+}
+
+/* called during probe() after chip reset completes */
+static int ehci_pci_setup(struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+	u32			temp;
+	int			retval;
+
+	ehci->caps = hcd->regs;
+
+	/*
+	 * ehci_init() causes memory for DMA transfers to be
+	 * allocated.  Thus, any vendor-specific workarounds based on
+	 * limiting the type of memory used for DMA transfers must
+	 * happen before ehci_setup() is called.
+	 *
+	 * Most other workarounds can be done either before or after
+	 * init and reset; they are located here too.
+	 */
+	switch (pdev->vendor) {
+	case PCI_VENDOR_ID_TOSHIBA_2:
+		/* celleb's companion chip */
+		if (pdev->device == 0x01b5) {
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+			ehci->big_endian_mmio = 1;
+#else
+			ehci_warn(ehci,
+				  "unsupported big endian Toshiba quirk\n");
+#endif
+		}
+		break;
+	case PCI_VENDOR_ID_NVIDIA:
+		/* NVidia reports that certain chips don't handle
+		 * QH, ITD, or SITD addresses above 2GB.  (But TD,
+		 * data buffer, and periodic schedule are normal.)
+		 */
+		switch (pdev->device) {
+		case 0x003c:	/* MCP04 */
+		case 0x005b:	/* CK804 */
+		case 0x00d8:	/* CK8 */
+		case 0x00e8:	/* CK8S */
+			if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(31)) < 0)
+				ehci_warn(ehci, "can't enable NVidia "
+					"workaround for >2GB RAM\n");
+			break;
+
+		/* Some NForce2 chips have problems with selective suspend;
+		 * fixed in newer silicon.
+		 */
+		case 0x0068:
+			if (pdev->revision < 0xa4)
+				ehci->no_selective_suspend = 1;
+			break;
+		}
+		break;
+	case PCI_VENDOR_ID_INTEL:
+		if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB)
+			hcd->has_tt = 1;
+		break;
+	case PCI_VENDOR_ID_TDI:
+		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI)
+			hcd->has_tt = 1;
+		break;
+	case PCI_VENDOR_ID_AMD:
+		/* AMD PLL quirk */
+		if (usb_amd_quirk_pll_check())
+			ehci->amd_pll_fix = 1;
+		/* AMD8111 EHCI doesn't work, according to AMD errata */
+		if (pdev->device == 0x7463) {
+			ehci_info(ehci, "ignoring AMD8111 (errata)\n");
+			retval = -EIO;
+			goto done;
+		}
+
+		/*
+		 * EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
+		 * read/write memory space which does not belong to it when
+		 * there is NULL pointer with T-bit set to 1 in the frame list
+		 * table. To avoid the issue, the frame list link pointer
+		 * should always contain a valid pointer to a inactive qh.
+		 */
+		if (pdev->device == 0x7808) {
+			ehci->use_dummy_qh = 1;
+			ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n");
+		}
+		break;
+	case PCI_VENDOR_ID_VIA:
+		if (pdev->device == 0x3104 && (pdev->revision & 0xf0) == 0x60) {
+			u8 tmp;
+
+			/* The VT6212 defaults to a 1 usec EHCI sleep time which
+			 * hogs the PCI bus *badly*. Setting bit 5 of 0x4B makes
+			 * that sleep time use the conventional 10 usec.
+			 */
+			pci_read_config_byte(pdev, 0x4b, &tmp);
+			if (tmp & 0x20)
+				break;
+			pci_write_config_byte(pdev, 0x4b, tmp | 0x20);
+		}
+		break;
+	case PCI_VENDOR_ID_ATI:
+		/* AMD PLL quirk */
+		if (usb_amd_quirk_pll_check())
+			ehci->amd_pll_fix = 1;
+
+		/*
+		 * EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
+		 * read/write memory space which does not belong to it when
+		 * there is NULL pointer with T-bit set to 1 in the frame list
+		 * table. To avoid the issue, the frame list link pointer
+		 * should always contain a valid pointer to a inactive qh.
+		 */
+		if (pdev->device == 0x4396) {
+			ehci->use_dummy_qh = 1;
+			ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n");
+		}
+		/* SB600 and old version of SB700 have a bug in EHCI controller,
+		 * which causes usb devices lose response in some cases.
+		 */
+		if ((pdev->device == 0x4386 || pdev->device == 0x4396) &&
+				usb_amd_hang_symptom_quirk()) {
+			u8 tmp;
+			ehci_info(ehci, "applying AMD SB600/SB700 USB freeze workaround\n");
+			pci_read_config_byte(pdev, 0x53, &tmp);
+			pci_write_config_byte(pdev, 0x53, tmp | (1<<3));
+		}
+		break;
+	case PCI_VENDOR_ID_NETMOS:
+		/* MosChip frame-index-register bug */
+		ehci_info(ehci, "applying MosChip frame-index workaround\n");
+		ehci->frame_index_bug = 1;
+		break;
+	case PCI_VENDOR_ID_HUAWEI:
+		/* Synopsys HC bug */
+		if (pdev->device == 0xa239) {
+			ehci_info(ehci, "applying Synopsys HC workaround\n");
+			ehci->has_synopsys_hc_bug = 1;
+		}
+		break;
+	case PCI_VENDOR_ID_ASPEED:
+		if (pdev->device == PCI_DEVICE_ID_ASPEED_EHCI) {
+			ehci_info(ehci, "applying Aspeed HC workaround\n");
+			ehci->is_aspeed = 1;
+		}
+		break;
+	case PCI_VENDOR_ID_ZHAOXIN:
+		if (pdev->device == 0x3104 && (pdev->revision & 0xf0) == 0x90)
+			ehci->zx_wakeup_clear_needed = 1;
+		break;
+	}
+
+	/* optional debug port, normally in the first BAR */
+	temp = pci_find_capability(pdev, PCI_CAP_ID_DBG);
+	if (temp) {
+		pci_read_config_dword(pdev, temp, &temp);
+		temp >>= 16;
+		if (((temp >> 13) & 7) == 1) {
+			u32 hcs_params = ehci_readl(ehci,
+						    &ehci->caps->hcs_params);
+
+			temp &= 0x1fff;
+			ehci->debug = hcd->regs + temp;
+			temp = ehci_readl(ehci, &ehci->debug->control);
+			ehci_info(ehci, "debug port %d%s\n",
+				  HCS_DEBUG_PORT(hcs_params),
+				  (temp & DBGP_ENABLED) ? " IN USE" : "");
+			if (!(temp & DBGP_ENABLED))
+				ehci->debug = NULL;
+		}
+	}
+
+	retval = ehci_setup(hcd);
+	if (retval)
+		return retval;
+
+	/* These workarounds need to be applied after ehci_setup() */
+	switch (pdev->vendor) {
+	case PCI_VENDOR_ID_NEC:
+	case PCI_VENDOR_ID_INTEL:
+	case PCI_VENDOR_ID_AMD:
+		ehci->need_io_watchdog = 0;
+		break;
+	case PCI_VENDOR_ID_NVIDIA:
+		switch (pdev->device) {
+		/* MCP89 chips on the MacBookAir3,1 give EPROTO when
+		 * fetching device descriptors unless LPM is disabled.
+		 * There are also intermittent problems enumerating
+		 * devices with PPCD enabled.
+		 */
+		case 0x0d9d:
+			ehci_info(ehci, "disable ppcd for nvidia mcp89\n");
+			ehci->has_ppcd = 0;
+			ehci->command &= ~CMD_PPCEE;
+			break;
+		}
+		break;
+	}
+
+	/* at least the Genesys GL880S needs fixup here */
+	temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
+	temp &= 0x0f;
+	if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
+		ehci_dbg(ehci, "bogus port configuration: "
+			"cc=%d x pcc=%d < ports=%d\n",
+			HCS_N_CC(ehci->hcs_params),
+			HCS_N_PCC(ehci->hcs_params),
+			HCS_N_PORTS(ehci->hcs_params));
+
+		switch (pdev->vendor) {
+		case 0x17a0:		/* GENESYS */
+			/* GL880S: should be PORTS=2 */
+			temp |= (ehci->hcs_params & ~0xf);
+			ehci->hcs_params = temp;
+			break;
+		case PCI_VENDOR_ID_NVIDIA:
+			/* NF4: should be PCC=10 */
+			break;
+		}
+	}
+
+	/* Serial Bus Release Number is at PCI 0x60 offset */
+	if (pdev->vendor == PCI_VENDOR_ID_STMICRO
+	    && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST)
+		;	/* ConneXT has no sbrn register */
+	else if (pdev->vendor == PCI_VENDOR_ID_HUAWEI
+			 && pdev->device == 0xa239)
+		;	/* HUAWEI Kunpeng920 USB EHCI has no sbrn register */
+	else
+		pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
+
+	/* Keep this around for a while just in case some EHCI
+	 * implementation uses legacy PCI PM support.  This test
+	 * can be removed on 17 Dec 2009 if the dev_warn() hasn't
+	 * been triggered by then.
+	 */
+	if (!device_can_wakeup(&pdev->dev)) {
+		u16	port_wake;
+
+		pci_read_config_word(pdev, 0x62, &port_wake);
+		if (port_wake & 0x0001) {
+			dev_warn(&pdev->dev, "Enabling legacy PCI PM\n");
+			device_set_wakeup_capable(&pdev->dev, 1);
+		}
+	}
+
+#ifdef	CONFIG_PM
+	if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev))
+		ehci_warn(ehci, "selective suspend/wakeup unavailable\n");
+#endif
+
+	retval = ehci_pci_reinit(ehci, pdev);
+done:
+	return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_PM
+
+/* suspend/resume, section 4.3 */
+
+/* These routines rely on the PCI bus glue
+ * to handle powerdown and wakeup, and currently also on
+ * transceivers that don't need any software attention to set up
+ * the right sort of wakeup.
+ * Also they depend on separate root hub suspend/resume.
+ */
+
+static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+
+	if (ehci_resume(hcd, hibernated) != 0)
+		(void) ehci_pci_reinit(ehci, pdev);
+	return 0;
+}
+
+#else
+
+#define ehci_suspend		NULL
+#define ehci_pci_resume		NULL
+#endif	/* CONFIG_PM */
+
+static struct hc_driver __read_mostly ehci_pci_hc_driver;
+
+static const struct ehci_driver_overrides pci_overrides __initconst = {
+	.reset =		ehci_pci_setup,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int ehci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	if (is_bypassed_id(pdev))
+		return -ENODEV;
+	return usb_hcd_pci_probe(pdev, &ehci_pci_hc_driver);
+}
+
+static void ehci_pci_remove(struct pci_dev *pdev)
+{
+	pci_clear_mwi(pdev);
+	usb_hcd_pci_remove(pdev);
+}
+
+/* PCI driver selection metadata; PCI hotplugging uses this */
+static const struct pci_device_id pci_ids [] = { {
+	/* handle any USB 2.0 EHCI controller */
+	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
+	}, {
+	PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST),
+	},
+	{ /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver ehci_pci_driver = {
+	.name =		hcd_name,
+	.id_table =	pci_ids,
+
+	.probe =	ehci_pci_probe,
+	.remove =	ehci_pci_remove,
+	.shutdown = 	usb_hcd_pci_shutdown,
+
+#ifdef CONFIG_PM
+	.driver =	{
+		.pm =	&usb_hcd_pci_pm_ops
+	},
+#endif
+};
+
+static int __init ehci_pci_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ehci_init_driver(&ehci_pci_hc_driver, &pci_overrides);
+
+	/* Entries for the PCI suspend/resume callbacks are special */
+	ehci_pci_hc_driver.pci_suspend = ehci_suspend;
+	ehci_pci_hc_driver.pci_resume = ehci_pci_resume;
+
+	return pci_register_driver(&ehci_pci_driver);
+}
+module_init(ehci_pci_init);
+
+static void __exit ehci_pci_cleanup(void)
+{
+	pci_unregister_driver(&ehci_pci_driver);
+}
+module_exit(ehci_pci_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("David Brownell");
+MODULE_AUTHOR("Alan Stern");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
new file mode 100644
index 000000000..fe497c876
--- /dev/null
+++ b/drivers/usb/host/ehci-platform.c
@@ -0,0 +1,544 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Generic platform ehci driver
+ *
+ * Copyright 2007 Steven Brown <sbrown@cortland.com>
+ * Copyright 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Derived from the ohci-ssb driver
+ * Copyright 2007 Michael Buesch <m@bues.ch>
+ *
+ * Derived from the EHCI-PCI driver
+ * Copyright (c) 2000-2004 by David Brownell
+ *
+ * Derived from the ohci-pci driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ */
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/sys_soc.h>
+#include <linux/timer.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/of.h>
+
+#include "ehci.h"
+
+#define DRIVER_DESC "EHCI generic platform driver"
+#define EHCI_MAX_CLKS 4
+#define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)
+
+#define BCM_USB_FIFO_THRESHOLD	0x00800040
+
+struct ehci_platform_priv {
+	struct clk *clks[EHCI_MAX_CLKS];
+	struct reset_control *rsts;
+	bool reset_on_resume;
+	bool quirk_poll;
+	struct timer_list poll_timer;
+	struct delayed_work poll_work;
+};
+
+static int ehci_platform_reset(struct usb_hcd *hcd)
+{
+	struct platform_device *pdev = to_platform_device(hcd->self.controller);
+	struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+
+	ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
+
+	if (pdata->pre_setup) {
+		retval = pdata->pre_setup(hcd);
+		if (retval < 0)
+			return retval;
+	}
+
+	ehci->caps = hcd->regs + pdata->caps_offset;
+	retval = ehci_setup(hcd);
+	if (retval)
+		return retval;
+
+	if (pdata->no_io_watchdog)
+		ehci->need_io_watchdog = 0;
+
+	if (of_device_is_compatible(pdev->dev.of_node, "brcm,xgs-iproc-ehci"))
+		ehci_writel(ehci, BCM_USB_FIFO_THRESHOLD,
+			    &ehci->regs->brcm_insnreg[1]);
+
+	return 0;
+}
+
+static int ehci_platform_power_on(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int clk, ret;
+
+	for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) {
+		ret = clk_prepare_enable(priv->clks[clk]);
+		if (ret)
+			goto err_disable_clks;
+	}
+
+	return 0;
+
+err_disable_clks:
+	while (--clk >= 0)
+		clk_disable_unprepare(priv->clks[clk]);
+
+	return ret;
+}
+
+static void ehci_platform_power_off(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int clk;
+
+	for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--)
+		if (priv->clks[clk])
+			clk_disable_unprepare(priv->clks[clk]);
+}
+
+static struct hc_driver __read_mostly ehci_platform_hc_driver;
+
+static const struct ehci_driver_overrides platform_overrides __initconst = {
+	.reset =		ehci_platform_reset,
+	.extra_priv_size =	sizeof(struct ehci_platform_priv),
+};
+
+static struct usb_ehci_pdata ehci_platform_defaults = {
+	.power_on =		ehci_platform_power_on,
+	.power_suspend =	ehci_platform_power_off,
+	.power_off =		ehci_platform_power_off,
+};
+
+/**
+ * quirk_poll_check_port_status - Poll port_status if the device sticks
+ * @ehci: the ehci hcd pointer
+ *
+ * Since EHCI/OHCI controllers on R-Car Gen3 SoCs are possible to be getting
+ * stuck very rarely after a full/low usb device was disconnected. To
+ * detect such a situation, the controllers require a special way which poll
+ * the EHCI PORTSC register.
+ *
+ * Return: true if the controller's port_status indicated getting stuck
+ */
+static bool quirk_poll_check_port_status(struct ehci_hcd *ehci)
+{
+	u32 port_status = ehci_readl(ehci, &ehci->regs->port_status[0]);
+
+	if (!(port_status & PORT_OWNER) &&
+	     (port_status & PORT_POWER) &&
+	    !(port_status & PORT_CONNECT) &&
+	     (port_status & PORT_LS_MASK))
+		return true;
+
+	return false;
+}
+
+/**
+ * quirk_poll_rebind_companion - rebind comanion device to recover
+ * @ehci: the ehci hcd pointer
+ *
+ * Since EHCI/OHCI controllers on R-Car Gen3 SoCs are possible to be getting
+ * stuck very rarely after a full/low usb device was disconnected. To
+ * recover from such a situation, the controllers require changing the OHCI
+ * functional state.
+ */
+static void quirk_poll_rebind_companion(struct ehci_hcd *ehci)
+{
+	struct device *companion_dev;
+	struct usb_hcd *hcd = ehci_to_hcd(ehci);
+
+	companion_dev = usb_of_get_companion_dev(hcd->self.controller);
+	if (!companion_dev)
+		return;
+
+	device_release_driver(companion_dev);
+	if (device_attach(companion_dev) < 0)
+		ehci_err(ehci, "%s: failed\n", __func__);
+
+	put_device(companion_dev);
+}
+
+static void quirk_poll_work(struct work_struct *work)
+{
+	struct ehci_platform_priv *priv =
+		container_of(to_delayed_work(work), struct ehci_platform_priv,
+			     poll_work);
+	struct ehci_hcd *ehci = container_of((void *)priv, struct ehci_hcd,
+					     priv);
+
+	/* check the status twice to reduce misdetection rate */
+	if (!quirk_poll_check_port_status(ehci))
+		return;
+	udelay(10);
+	if (!quirk_poll_check_port_status(ehci))
+		return;
+
+	ehci_dbg(ehci, "%s: detected getting stuck. rebind now!\n", __func__);
+	quirk_poll_rebind_companion(ehci);
+}
+
+static void quirk_poll_timer(struct timer_list *t)
+{
+	struct ehci_platform_priv *priv = from_timer(priv, t, poll_timer);
+	struct ehci_hcd *ehci = container_of((void *)priv, struct ehci_hcd,
+					     priv);
+
+	if (quirk_poll_check_port_status(ehci)) {
+		/*
+		 * Now scheduling the work for testing the port more. Note that
+		 * updating the status is possible to be delayed when
+		 * reconnection. So, this uses delayed work with 5 ms delay
+		 * to avoid misdetection.
+		 */
+		schedule_delayed_work(&priv->poll_work, msecs_to_jiffies(5));
+	}
+
+	mod_timer(&priv->poll_timer, jiffies + HZ);
+}
+
+static void quirk_poll_init(struct ehci_platform_priv *priv)
+{
+	INIT_DELAYED_WORK(&priv->poll_work, quirk_poll_work);
+	timer_setup(&priv->poll_timer, quirk_poll_timer, 0);
+	mod_timer(&priv->poll_timer, jiffies + HZ);
+}
+
+static void quirk_poll_end(struct ehci_platform_priv *priv)
+{
+	del_timer_sync(&priv->poll_timer);
+	cancel_delayed_work(&priv->poll_work);
+}
+
+static const struct soc_device_attribute quirk_poll_match[] = {
+	{ .family = "R-Car Gen3" },
+	{ /* sentinel*/ }
+};
+
+static int ehci_platform_probe(struct platform_device *dev)
+{
+	struct usb_hcd *hcd;
+	struct resource *res_mem;
+	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
+	struct ehci_platform_priv *priv;
+	struct ehci_hcd *ehci;
+	int err, irq, clk = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	/*
+	 * Use reasonable defaults so platforms don't have to provide these
+	 * with DT probing on ARM.
+	 */
+	if (!pdata)
+		pdata = &ehci_platform_defaults;
+
+	err = dma_coerce_mask_and_coherent(&dev->dev,
+		pdata->dma_mask_64 ? DMA_BIT_MASK(64) : DMA_BIT_MASK(32));
+	if (err) {
+		dev_err(&dev->dev, "Error: DMA mask configuration failed\n");
+		return err;
+	}
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0)
+		return irq;
+
+	hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
+			     dev_name(&dev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	platform_set_drvdata(dev, hcd);
+	dev->dev.platform_data = pdata;
+	priv = hcd_to_ehci_priv(hcd);
+	ehci = hcd_to_ehci(hcd);
+
+	if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
+		if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
+			ehci->big_endian_mmio = 1;
+
+		if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
+			ehci->big_endian_desc = 1;
+
+		if (of_property_read_bool(dev->dev.of_node, "big-endian"))
+			ehci->big_endian_mmio = ehci->big_endian_desc = 1;
+
+		if (of_property_read_bool(dev->dev.of_node, "spurious-oc"))
+			ehci->spurious_oc = 1;
+
+		if (of_property_read_bool(dev->dev.of_node,
+					  "needs-reset-on-resume"))
+			priv->reset_on_resume = true;
+
+		if (of_property_read_bool(dev->dev.of_node,
+					  "has-transaction-translator"))
+			hcd->has_tt = 1;
+
+		if (of_device_is_compatible(dev->dev.of_node,
+					    "aspeed,ast2500-ehci") ||
+		    of_device_is_compatible(dev->dev.of_node,
+					    "aspeed,ast2600-ehci"))
+			ehci->is_aspeed = 1;
+
+		if (soc_device_match(quirk_poll_match))
+			priv->quirk_poll = true;
+
+		for (clk = 0; clk < EHCI_MAX_CLKS; clk++) {
+			priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
+			if (IS_ERR(priv->clks[clk])) {
+				err = PTR_ERR(priv->clks[clk]);
+				if (err == -EPROBE_DEFER)
+					goto err_put_clks;
+				priv->clks[clk] = NULL;
+				break;
+			}
+		}
+	}
+
+	priv->rsts = devm_reset_control_array_get_optional_shared(&dev->dev);
+	if (IS_ERR(priv->rsts)) {
+		err = PTR_ERR(priv->rsts);
+		goto err_put_clks;
+	}
+
+	err = reset_control_deassert(priv->rsts);
+	if (err)
+		goto err_put_clks;
+
+	if (pdata->big_endian_desc)
+		ehci->big_endian_desc = 1;
+	if (pdata->big_endian_mmio)
+		ehci->big_endian_mmio = 1;
+	if (pdata->has_tt)
+		hcd->has_tt = 1;
+	if (pdata->reset_on_resume)
+		priv->reset_on_resume = true;
+	if (pdata->spurious_oc)
+		ehci->spurious_oc = 1;
+
+#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+	if (ehci->big_endian_mmio) {
+		dev_err(&dev->dev,
+			"Error: CONFIG_USB_EHCI_BIG_ENDIAN_MMIO not set\n");
+		err = -EINVAL;
+		goto err_reset;
+	}
+#endif
+#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
+	if (ehci->big_endian_desc) {
+		dev_err(&dev->dev,
+			"Error: CONFIG_USB_EHCI_BIG_ENDIAN_DESC not set\n");
+		err = -EINVAL;
+		goto err_reset;
+	}
+#endif
+
+	if (pdata->power_on) {
+		err = pdata->power_on(dev);
+		if (err < 0)
+			goto err_reset;
+	}
+
+	res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
+	if (IS_ERR(hcd->regs)) {
+		err = PTR_ERR(hcd->regs);
+		goto err_power;
+	}
+	hcd->rsrc_start = res_mem->start;
+	hcd->rsrc_len = resource_size(res_mem);
+
+	hcd->tpl_support = of_usb_host_tpl_support(dev->dev.of_node);
+
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (err)
+		goto err_power;
+
+	device_wakeup_enable(hcd->self.controller);
+	device_enable_async_suspend(hcd->self.controller);
+	platform_set_drvdata(dev, hcd);
+
+	if (priv->quirk_poll)
+		quirk_poll_init(priv);
+
+	return err;
+
+err_power:
+	if (pdata->power_off)
+		pdata->power_off(dev);
+err_reset:
+	reset_control_assert(priv->rsts);
+err_put_clks:
+	while (--clk >= 0)
+		clk_put(priv->clks[clk]);
+
+	if (pdata == &ehci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	usb_put_hcd(hcd);
+
+	return err;
+}
+
+static int ehci_platform_remove(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int clk;
+
+	if (priv->quirk_poll)
+		quirk_poll_end(priv);
+
+	usb_remove_hcd(hcd);
+
+	if (pdata->power_off)
+		pdata->power_off(dev);
+
+	reset_control_assert(priv->rsts);
+
+	for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++)
+		clk_put(priv->clks[clk]);
+
+	usb_put_hcd(hcd);
+
+	if (pdata == &ehci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	return 0;
+}
+
+static int __maybe_unused ehci_platform_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct usb_ehci_pdata *pdata = dev_get_platdata(dev);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	bool do_wakeup = device_may_wakeup(dev);
+	int ret;
+
+	if (priv->quirk_poll)
+		quirk_poll_end(priv);
+
+	ret = ehci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+
+	if (pdata->power_suspend)
+		pdata->power_suspend(pdev);
+
+	return ret;
+}
+
+static int __maybe_unused ehci_platform_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct usb_ehci_pdata *pdata = dev_get_platdata(dev);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	struct device *companion_dev;
+
+	if (pdata->power_on) {
+		int err = pdata->power_on(pdev);
+		if (err < 0)
+			return err;
+	}
+
+	companion_dev = usb_of_get_companion_dev(hcd->self.controller);
+	if (companion_dev) {
+		device_pm_wait_for_dev(hcd->self.controller, companion_dev);
+		put_device(companion_dev);
+	}
+
+	ehci_resume(hcd, priv->reset_on_resume);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	if (priv->quirk_poll)
+		quirk_poll_init(priv);
+
+	return 0;
+}
+
+static const struct of_device_id vt8500_ehci_ids[] = {
+	{ .compatible = "via,vt8500-ehci", },
+	{ .compatible = "wm,prizm-ehci", },
+	{ .compatible = "generic-ehci", },
+	{ .compatible = "cavium,octeon-6335-ehci", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, vt8500_ehci_ids);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id ehci_acpi_match[] = {
+	{ "PNP0D20", 0 }, /* EHCI controller without debug */
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, ehci_acpi_match);
+#endif
+
+static const struct platform_device_id ehci_platform_table[] = {
+	{ "ehci-platform", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, ehci_platform_table);
+
+static SIMPLE_DEV_PM_OPS(ehci_platform_pm_ops, ehci_platform_suspend,
+	ehci_platform_resume);
+
+static struct platform_driver ehci_platform_driver = {
+	.id_table	= ehci_platform_table,
+	.probe		= ehci_platform_probe,
+	.remove		= ehci_platform_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "ehci-platform",
+		.pm	= pm_ptr(&ehci_platform_pm_ops),
+		.of_match_table = vt8500_ehci_ids,
+		.acpi_match_table = ACPI_PTR(ehci_acpi_match),
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	}
+};
+
+static int __init ehci_platform_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides);
+	return platform_driver_register(&ehci_platform_driver);
+}
+module_init(ehci_platform_init);
+
+static void __exit ehci_platform_cleanup(void)
+{
+	platform_driver_unregister(&ehci_platform_driver);
+}
+module_exit(ehci_platform_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Hauke Mehrtens");
+MODULE_AUTHOR("Alan Stern");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
new file mode 100644
index 000000000..28a19693c
--- /dev/null
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * EHCI HCD (Host Controller Driver) for USB.
+ *
+ * Bus Glue for PPC On-Chip EHCI driver on the of_platform bus
+ * Tested on AMCC PPC 440EPx
+ *
+ * Valentine Barshak <vbarshak@ru.mvista.com>
+ *
+ * Based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de>
+ * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com>
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/err.h>
+#include <linux/signal.h>
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+
+static const struct hc_driver ehci_ppc_of_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "OF EHCI",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset			= ehci_setup,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+#endif
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+
+/*
+ * 440EPx Errata USBH_3
+ * Fix: Enable Break Memory Transfer (BMT) in INSNREG3
+ */
+#define PPC440EPX_EHCI0_INSREG_BMT	(0x1 << 0)
+static int
+ppc44x_enable_bmt(struct device_node *dn)
+{
+	__iomem u32 *insreg_virt;
+
+	insreg_virt = of_iomap(dn, 1);
+	if (!insreg_virt)
+		return  -EINVAL;
+
+	out_be32(insreg_virt + 3, PPC440EPX_EHCI0_INSREG_BMT);
+
+	iounmap(insreg_virt);
+	return 0;
+}
+
+
+static int ehci_hcd_ppc_of_probe(struct platform_device *op)
+{
+	struct device_node *dn = op->dev.of_node;
+	struct usb_hcd *hcd;
+	struct ehci_hcd	*ehci = NULL;
+	struct resource res;
+	int irq;
+	int rv;
+
+	struct device_node *np;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
+
+	rv = of_address_to_resource(dn, 0, &res);
+	if (rv)
+		return rv;
+
+	hcd = usb_create_hcd(&ehci_ppc_of_hc_driver, &op->dev, "PPC-OF USB");
+	if (!hcd)
+		return -ENOMEM;
+
+	hcd->rsrc_start = res.start;
+	hcd->rsrc_len = resource_size(&res);
+
+	irq = irq_of_parse_and_map(dn, 0);
+	if (irq == NO_IRQ) {
+		dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n",
+			__FILE__);
+		rv = -EBUSY;
+		goto err_irq;
+	}
+
+	hcd->regs = devm_ioremap_resource(&op->dev, &res);
+	if (IS_ERR(hcd->regs)) {
+		rv = PTR_ERR(hcd->regs);
+		goto err_ioremap;
+	}
+
+	ehci = hcd_to_ehci(hcd);
+	np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx");
+	if (np != NULL) {
+		/* claim we really affected by usb23 erratum */
+		if (!of_address_to_resource(np, 0, &res))
+			ehci->ohci_hcctrl_reg =
+				devm_ioremap(&op->dev,
+					     res.start + OHCI_HCCTRL_OFFSET,
+					     OHCI_HCCTRL_LEN);
+		else
+			pr_debug("%s: no ohci offset in fdt\n", __FILE__);
+		if (!ehci->ohci_hcctrl_reg) {
+			pr_debug("%s: ioremap for ohci hcctrl failed\n", __FILE__);
+		} else {
+			ehci->has_amcc_usb23 = 1;
+		}
+		of_node_put(np);
+	}
+
+	if (of_get_property(dn, "big-endian", NULL)) {
+		ehci->big_endian_mmio = 1;
+		ehci->big_endian_desc = 1;
+	}
+	if (of_get_property(dn, "big-endian-regs", NULL))
+		ehci->big_endian_mmio = 1;
+	if (of_get_property(dn, "big-endian-desc", NULL))
+		ehci->big_endian_desc = 1;
+
+	ehci->caps = hcd->regs;
+
+	if (of_device_is_compatible(dn, "ibm,usb-ehci-440epx")) {
+		rv = ppc44x_enable_bmt(dn);
+		ehci_dbg(ehci, "Break Memory Transfer (BMT) is %senabled!\n",
+				rv ? "NOT ": "");
+	}
+
+	rv = usb_add_hcd(hcd, irq, 0);
+	if (rv)
+		goto err_ioremap;
+
+	device_wakeup_enable(hcd->self.controller);
+	return 0;
+
+err_ioremap:
+	irq_dispose_mapping(irq);
+err_irq:
+	usb_put_hcd(hcd);
+
+	return rv;
+}
+
+
+static int ehci_hcd_ppc_of_remove(struct platform_device *op)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(op);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+	struct device_node *np;
+	struct resource res;
+
+	dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
+
+	usb_remove_hcd(hcd);
+
+	irq_dispose_mapping(hcd->irq);
+
+	/* use request_mem_region to test if the ohci driver is loaded.  if so
+	 * ensure the ohci core is operational.
+	 */
+	if (ehci->has_amcc_usb23) {
+		np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx");
+		if (np != NULL) {
+			if (!of_address_to_resource(np, 0, &res))
+				if (!request_mem_region(res.start,
+							    0x4, hcd_name))
+					set_ohci_hcfs(ehci, 1);
+				else
+					release_mem_region(res.start, 0x4);
+			else
+				pr_debug("%s: no ohci offset in fdt\n", __FILE__);
+			of_node_put(np);
+		}
+	}
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+
+static const struct of_device_id ehci_hcd_ppc_of_match[] = {
+	{
+		.compatible = "usb-ehci",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ehci_hcd_ppc_of_match);
+
+
+static struct platform_driver ehci_hcd_ppc_of_driver = {
+	.probe		= ehci_hcd_ppc_of_probe,
+	.remove		= ehci_hcd_ppc_of_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver = {
+		.name = "ppc-of-ehci",
+		.of_match_table = ehci_hcd_ppc_of_match,
+	},
+};
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
new file mode 100644
index 000000000..98568b046
--- /dev/null
+++ b/drivers/usb/host/ehci-ps3.c
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  PS3 EHCI Host Controller driver
+ *
+ *  Copyright (C) 2006 Sony Computer Entertainment Inc.
+ *  Copyright 2006 Sony Corp.
+ */
+
+#include <asm/firmware.h>
+#include <asm/ps3.h>
+
+static void ps3_ehci_setup_insnreg(struct ehci_hcd *ehci)
+{
+	/* PS3 HC internal setup register offsets. */
+
+	enum ps3_ehci_hc_insnreg {
+		ps3_ehci_hc_insnreg01 = 0x084,
+		ps3_ehci_hc_insnreg02 = 0x088,
+		ps3_ehci_hc_insnreg03 = 0x08c,
+	};
+
+	/* PS3 EHCI HC errata fix 316 - The PS3 EHCI HC will reset its
+	 * internal INSNREGXX setup regs back to the chip default values
+	 * on Host Controller Reset (CMD_RESET) or Light Host Controller
+	 * Reset (CMD_LRESET).  The work-around for this is for the HC
+	 * driver to re-initialise these regs when ever the HC is reset.
+	 */
+
+	/* Set burst transfer counts to 256 out, 32 in. */
+
+	writel_be(0x01000020, (void __iomem *)ehci->regs +
+		ps3_ehci_hc_insnreg01);
+
+	/* Enable burst transfer counts. */
+
+	writel_be(0x00000001, (void __iomem *)ehci->regs +
+		ps3_ehci_hc_insnreg03);
+}
+
+static int ps3_ehci_hc_reset(struct usb_hcd *hcd)
+{
+	int result;
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+	ehci->big_endian_mmio = 1;
+	ehci->caps = hcd->regs;
+
+	result = ehci_setup(hcd);
+	if (result)
+		return result;
+
+	ps3_ehci_setup_insnreg(ehci);
+
+	return result;
+}
+
+static const struct hc_driver ps3_ehci_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "PS3 EHCI Host Controller",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH,
+	.reset			= ps3_ehci_hc_reset,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+	.get_frame_number	= ehci_get_frame,
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+#if defined(CONFIG_PM)
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+#endif
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+static int ps3_ehci_probe(struct ps3_system_bus_device *dev)
+{
+	int result;
+	struct usb_hcd *hcd;
+	unsigned int virq;
+	static u64 dummy_mask;
+
+	if (usb_disabled()) {
+		result = -ENODEV;
+		goto fail_start;
+	}
+
+	result = ps3_open_hv_device(dev);
+
+	if (result) {
+		dev_dbg(&dev->core, "%s:%d: ps3_open_hv_device failed\n",
+			__func__, __LINE__);
+		goto fail_open;
+	}
+
+	result = ps3_dma_region_create(dev->d_region);
+
+	if (result) {
+		dev_dbg(&dev->core, "%s:%d: ps3_dma_region_create failed: "
+			"(%d)\n", __func__, __LINE__, result);
+		BUG_ON("check region type");
+		goto fail_dma_region;
+	}
+
+	result = ps3_mmio_region_create(dev->m_region);
+
+	if (result) {
+		dev_dbg(&dev->core, "%s:%d: ps3_map_mmio_region failed\n",
+			__func__, __LINE__);
+		result = -EPERM;
+		goto fail_mmio_region;
+	}
+
+	dev_dbg(&dev->core, "%s:%d: mmio mapped_addr %lxh\n", __func__,
+		__LINE__, dev->m_region->lpar_addr);
+
+	result = ps3_io_irq_setup(PS3_BINDING_CPU_ANY, dev->interrupt_id, &virq);
+
+	if (result) {
+		dev_dbg(&dev->core, "%s:%d: ps3_construct_io_irq(%d) failed.\n",
+			__func__, __LINE__, virq);
+		result = -EPERM;
+		goto fail_irq;
+	}
+
+	dummy_mask = DMA_BIT_MASK(32);
+	dev->core.dma_mask = &dummy_mask;
+	dma_set_coherent_mask(&dev->core, dummy_mask);
+
+	hcd = usb_create_hcd(&ps3_ehci_hc_driver, &dev->core, dev_name(&dev->core));
+
+	if (!hcd) {
+		dev_dbg(&dev->core, "%s:%d: usb_create_hcd failed\n", __func__,
+			__LINE__);
+		result = -ENOMEM;
+		goto fail_create_hcd;
+	}
+
+	hcd->rsrc_start = dev->m_region->lpar_addr;
+	hcd->rsrc_len = dev->m_region->len;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name))
+		dev_dbg(&dev->core, "%s:%d: request_mem_region failed\n",
+			__func__, __LINE__);
+
+	hcd->regs = ioremap(dev->m_region->lpar_addr, dev->m_region->len);
+
+	if (!hcd->regs) {
+		dev_dbg(&dev->core, "%s:%d: ioremap failed\n", __func__,
+			__LINE__);
+		result = -EPERM;
+		goto fail_ioremap;
+	}
+
+	dev_dbg(&dev->core, "%s:%d: hcd->rsrc_start %lxh\n", __func__, __LINE__,
+		(unsigned long)hcd->rsrc_start);
+	dev_dbg(&dev->core, "%s:%d: hcd->rsrc_len   %lxh\n", __func__, __LINE__,
+		(unsigned long)hcd->rsrc_len);
+	dev_dbg(&dev->core, "%s:%d: hcd->regs       %lxh\n", __func__, __LINE__,
+		(unsigned long)hcd->regs);
+	dev_dbg(&dev->core, "%s:%d: virq            %lu\n", __func__, __LINE__,
+		(unsigned long)virq);
+
+	ps3_system_bus_set_drvdata(dev, hcd);
+
+	result = usb_add_hcd(hcd, virq, 0);
+
+	if (result) {
+		dev_dbg(&dev->core, "%s:%d: usb_add_hcd failed (%d)\n",
+			__func__, __LINE__, result);
+		goto fail_add_hcd;
+	}
+
+	device_wakeup_enable(hcd->self.controller);
+	return result;
+
+fail_add_hcd:
+	iounmap(hcd->regs);
+fail_ioremap:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+fail_create_hcd:
+	ps3_io_irq_destroy(virq);
+fail_irq:
+	ps3_free_mmio_region(dev->m_region);
+fail_mmio_region:
+	ps3_dma_region_free(dev->d_region);
+fail_dma_region:
+	ps3_close_hv_device(dev);
+fail_open:
+fail_start:
+	return result;
+}
+
+static void ps3_ehci_remove(struct ps3_system_bus_device *dev)
+{
+	unsigned int tmp;
+	struct usb_hcd *hcd = ps3_system_bus_get_drvdata(dev);
+
+	BUG_ON(!hcd);
+
+	dev_dbg(&dev->core, "%s:%d: regs %p\n", __func__, __LINE__, hcd->regs);
+	dev_dbg(&dev->core, "%s:%d: irq %u\n", __func__, __LINE__, hcd->irq);
+
+	tmp = hcd->irq;
+
+	usb_remove_hcd(hcd);
+
+	ps3_system_bus_set_drvdata(dev, NULL);
+
+	BUG_ON(!hcd->regs);
+	iounmap(hcd->regs);
+
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+
+	ps3_io_irq_destroy(tmp);
+	ps3_free_mmio_region(dev->m_region);
+
+	ps3_dma_region_free(dev->d_region);
+	ps3_close_hv_device(dev);
+}
+
+static int __init ps3_ehci_driver_register(struct ps3_system_bus_driver *drv)
+{
+	return firmware_has_feature(FW_FEATURE_PS3_LV1)
+		? ps3_system_bus_driver_register(drv)
+		: 0;
+}
+
+static void ps3_ehci_driver_unregister(struct ps3_system_bus_driver *drv)
+{
+	if (firmware_has_feature(FW_FEATURE_PS3_LV1))
+		ps3_system_bus_driver_unregister(drv);
+}
+
+MODULE_ALIAS(PS3_MODULE_ALIAS_EHCI);
+
+static struct ps3_system_bus_driver ps3_ehci_driver = {
+	.core.name = "ps3-ehci-driver",
+	.core.owner = THIS_MODULE,
+	.match_id = PS3_MATCH_ID_EHCI,
+	.probe = ps3_ehci_probe,
+	.remove = ps3_ehci_remove,
+	.shutdown = ps3_ehci_remove,
+};
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
new file mode 100644
index 000000000..666f5c4db
--- /dev/null
+++ b/drivers/usb/host/ehci-q.c
@@ -0,0 +1,1530 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2001-2004 by David Brownell
+ */
+
+/* this file is part of ehci-hcd.c */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI hardware queue manipulation ... the core.  QH/QTD manipulation.
+ *
+ * Control, bulk, and interrupt traffic all use "qh" lists.  They list "qtd"
+ * entries describing USB transactions, max 16-20kB/entry (with 4kB-aligned
+ * buffers needed for the larger number).  We use one QH per endpoint, queue
+ * multiple urbs (all three types) per endpoint.  URBs may need several qtds.
+ *
+ * ISO traffic uses "ISO TD" (itd, and sitd) records, and (along with
+ * interrupts) needs careful scheduling.  Performance improvements can be
+ * an ongoing challenge.  That's in "ehci-sched.c".
+ *
+ * USB 1.1 devices are handled (a) by "companion" OHCI or UHCI root hubs,
+ * or otherwise through transaction translators (TTs) in USB 2.0 hubs using
+ * (b) special fields in qh entries or (c) split iso entries.  TTs will
+ * buffer low/full speed data so the host collects it at high speed.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* PID Codes that are used here, from EHCI specification, Table 3-16. */
+#define PID_CODE_IN    1
+#define PID_CODE_SETUP 2
+
+/* fill a qtd, returning how much of the buffer we were able to queue up */
+
+static unsigned int
+qtd_fill(struct ehci_hcd *ehci, struct ehci_qtd *qtd, dma_addr_t buf,
+		  size_t len, int token, int maxpacket)
+{
+	unsigned int count;
+	u64	addr = buf;
+	int	i;
+
+	/* one buffer entry per 4K ... first might be short or unaligned */
+	qtd->hw_buf[0] = cpu_to_hc32(ehci, (u32)addr);
+	qtd->hw_buf_hi[0] = cpu_to_hc32(ehci, (u32)(addr >> 32));
+	count = 0x1000 - (buf & 0x0fff);	/* rest of that page */
+	if (likely (len < count))		/* ... iff needed */
+		count = len;
+	else {
+		buf +=  0x1000;
+		buf &= ~0x0fff;
+
+		/* per-qtd limit: from 16K to 20K (best alignment) */
+		for (i = 1; count < len && i < 5; i++) {
+			addr = buf;
+			qtd->hw_buf[i] = cpu_to_hc32(ehci, (u32)addr);
+			qtd->hw_buf_hi[i] = cpu_to_hc32(ehci,
+					(u32)(addr >> 32));
+			buf += 0x1000;
+			if ((count + 0x1000) < len)
+				count += 0x1000;
+			else
+				count = len;
+		}
+
+		/* short packets may only terminate transfers */
+		if (count != len)
+			count -= (count % maxpacket);
+	}
+	qtd->hw_token = cpu_to_hc32(ehci, (count << 16) | token);
+	qtd->length = count;
+
+	return count;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline void
+qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd)
+{
+	struct ehci_qh_hw *hw = qh->hw;
+
+	/* writes to an active overlay are unsafe */
+	WARN_ON(qh->qh_state != QH_STATE_IDLE);
+
+	hw->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma);
+	hw->hw_alt_next = EHCI_LIST_END(ehci);
+
+	/* Except for control endpoints, we make hardware maintain data
+	 * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
+	 * and set the pseudo-toggle in udev. Only usb_clear_halt() will
+	 * ever clear it.
+	 */
+	if (!(hw->hw_info1 & cpu_to_hc32(ehci, QH_TOGGLE_CTL))) {
+		unsigned	is_out, epnum;
+
+		is_out = qh->is_out;
+		epnum = (hc32_to_cpup(ehci, &hw->hw_info1) >> 8) & 0x0f;
+		if (unlikely(!usb_gettoggle(qh->ps.udev, epnum, is_out))) {
+			hw->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
+			usb_settoggle(qh->ps.udev, epnum, is_out, 1);
+		}
+	}
+
+	hw->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
+}
+
+/* if it weren't for a common silicon quirk (writing the dummy into the qh
+ * overlay, so qh->hw_token wrongly becomes inactive/halted), only fault
+ * recovery (including urb dequeue) would need software changes to a QH...
+ */
+static void
+qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
+{
+	struct ehci_qtd *qtd;
+
+	qtd = list_entry(qh->qtd_list.next, struct ehci_qtd, qtd_list);
+
+	/*
+	 * first qtd may already be partially processed.
+	 * If we come here during unlink, the QH overlay region
+	 * might have reference to the just unlinked qtd. The
+	 * qtd is updated in qh_completions(). Update the QH
+	 * overlay here.
+	 */
+	if (qh->hw->hw_token & ACTIVE_BIT(ehci)) {
+		qh->hw->hw_qtd_next = qtd->hw_next;
+		if (qh->should_be_inactive)
+			ehci_warn(ehci, "qh %p should be inactive!\n", qh);
+	} else {
+		qh_update(ehci, qh, qtd);
+	}
+	qh->should_be_inactive = 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void qh_link_async(struct ehci_hcd *ehci, struct ehci_qh *qh);
+
+static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd,
+		struct usb_host_endpoint *ep)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	struct ehci_qh		*qh = ep->hcpriv;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&ehci->lock, flags);
+	qh->clearing_tt = 0;
+	if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list)
+			&& ehci->rh_state == EHCI_RH_RUNNING)
+		qh_link_async(ehci, qh);
+	spin_unlock_irqrestore(&ehci->lock, flags);
+}
+
+static void ehci_clear_tt_buffer(struct ehci_hcd *ehci, struct ehci_qh *qh,
+		struct urb *urb, u32 token)
+{
+
+	/* If an async split transaction gets an error or is unlinked,
+	 * the TT buffer may be left in an indeterminate state.  We
+	 * have to clear the TT buffer.
+	 *
+	 * Note: this routine is never called for Isochronous transfers.
+	 */
+	if (urb->dev->tt && !usb_pipeint(urb->pipe) && !qh->clearing_tt) {
+#ifdef CONFIG_DYNAMIC_DEBUG
+		struct usb_device *tt = urb->dev->tt->hub;
+		dev_dbg(&tt->dev,
+			"clear tt buffer port %d, a%d ep%d t%08x\n",
+			urb->dev->ttport, urb->dev->devnum,
+			usb_pipeendpoint(urb->pipe), token);
+#endif /* CONFIG_DYNAMIC_DEBUG */
+		if (!ehci_is_TDI(ehci)
+				|| urb->dev->tt->hub !=
+				   ehci_to_hcd(ehci)->self.root_hub) {
+			if (usb_hub_clear_tt_buffer(urb) == 0)
+				qh->clearing_tt = 1;
+		} else {
+
+			/* REVISIT ARC-derived cores don't clear the root
+			 * hub TT buffer in this way...
+			 */
+		}
+	}
+}
+
+static int qtd_copy_status (
+	struct ehci_hcd *ehci,
+	struct urb *urb,
+	size_t length,
+	u32 token
+)
+{
+	int	status = -EINPROGRESS;
+
+	/* count IN/OUT bytes, not SETUP (even short packets) */
+	if (likely(QTD_PID(token) != PID_CODE_SETUP))
+		urb->actual_length += length - QTD_LENGTH (token);
+
+	/* don't modify error codes */
+	if (unlikely(urb->unlinked))
+		return status;
+
+	/* force cleanup after short read; not always an error */
+	if (unlikely (IS_SHORT_READ (token)))
+		status = -EREMOTEIO;
+
+	/* serious "can't proceed" faults reported by the hardware */
+	if (token & QTD_STS_HALT) {
+		if (token & QTD_STS_BABBLE) {
+			/* FIXME "must" disable babbling device's port too */
+			status = -EOVERFLOW;
+		/*
+		 * When MMF is active and PID Code is IN, queue is halted.
+		 * EHCI Specification, Table 4-13.
+		 */
+		} else if ((token & QTD_STS_MMF) &&
+					(QTD_PID(token) == PID_CODE_IN)) {
+			status = -EPROTO;
+		/* CERR nonzero + halt --> stall */
+		} else if (QTD_CERR(token)) {
+			status = -EPIPE;
+
+		/* In theory, more than one of the following bits can be set
+		 * since they are sticky and the transaction is retried.
+		 * Which to test first is rather arbitrary.
+		 */
+		} else if (token & QTD_STS_MMF) {
+			/* fs/ls interrupt xfer missed the complete-split */
+			status = -EPROTO;
+		} else if (token & QTD_STS_DBE) {
+			status = (QTD_PID (token) == 1) /* IN ? */
+				? -ENOSR  /* hc couldn't read data */
+				: -ECOMM; /* hc couldn't write data */
+		} else if (token & QTD_STS_XACT) {
+			/* timeout, bad CRC, wrong PID, etc */
+			ehci_dbg(ehci, "devpath %s ep%d%s 3strikes\n",
+				urb->dev->devpath,
+				usb_pipeendpoint(urb->pipe),
+				usb_pipein(urb->pipe) ? "in" : "out");
+			status = -EPROTO;
+		} else {	/* unknown */
+			status = -EPROTO;
+		}
+	}
+
+	return status;
+}
+
+static void
+ehci_urb_done(struct ehci_hcd *ehci, struct urb *urb, int status)
+{
+	if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
+		/* ... update hc-wide periodic stats */
+		ehci_to_hcd(ehci)->self.bandwidth_int_reqs--;
+	}
+
+	if (unlikely(urb->unlinked)) {
+		INCR(ehci->stats.unlink);
+	} else {
+		/* report non-error and short read status as zero */
+		if (status == -EINPROGRESS || status == -EREMOTEIO)
+			status = 0;
+		INCR(ehci->stats.complete);
+	}
+
+#ifdef EHCI_URB_TRACE
+	ehci_dbg (ehci,
+		"%s %s urb %p ep%d%s status %d len %d/%d\n",
+		__func__, urb->dev->devpath, urb,
+		usb_pipeendpoint (urb->pipe),
+		usb_pipein (urb->pipe) ? "in" : "out",
+		status,
+		urb->actual_length, urb->transfer_buffer_length);
+#endif
+
+	usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+	usb_hcd_giveback_urb(ehci_to_hcd(ehci), urb, status);
+}
+
+static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh);
+
+/*
+ * Process and free completed qtds for a qh, returning URBs to drivers.
+ * Chases up to qh->hw_current.  Returns nonzero if the caller should
+ * unlink qh.
+ */
+static unsigned
+qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
+{
+	struct ehci_qtd		*last, *end = qh->dummy;
+	struct list_head	*entry, *tmp;
+	int			last_status;
+	int			stopped;
+	u8			state;
+	struct ehci_qh_hw	*hw = qh->hw;
+
+	/* completions (or tasks on other cpus) must never clobber HALT
+	 * till we've gone through and cleaned everything up, even when
+	 * they add urbs to this qh's queue or mark them for unlinking.
+	 *
+	 * NOTE:  unlinking expects to be done in queue order.
+	 *
+	 * It's a bug for qh->qh_state to be anything other than
+	 * QH_STATE_IDLE, unless our caller is scan_async() or
+	 * scan_intr().
+	 */
+	state = qh->qh_state;
+	qh->qh_state = QH_STATE_COMPLETING;
+	stopped = (state == QH_STATE_IDLE);
+
+ rescan:
+	last = NULL;
+	last_status = -EINPROGRESS;
+	qh->dequeue_during_giveback = 0;
+
+	/* remove de-activated QTDs from front of queue.
+	 * after faults (including short reads), cleanup this urb
+	 * then let the queue advance.
+	 * if queue is stopped, handles unlinks.
+	 */
+	list_for_each_safe (entry, tmp, &qh->qtd_list) {
+		struct ehci_qtd	*qtd;
+		struct urb	*urb;
+		u32		token = 0;
+
+		qtd = list_entry (entry, struct ehci_qtd, qtd_list);
+		urb = qtd->urb;
+
+		/* clean up any state from previous QTD ...*/
+		if (last) {
+			if (likely (last->urb != urb)) {
+				ehci_urb_done(ehci, last->urb, last_status);
+				last_status = -EINPROGRESS;
+			}
+			ehci_qtd_free (ehci, last);
+			last = NULL;
+		}
+
+		/* ignore urbs submitted during completions we reported */
+		if (qtd == end)
+			break;
+
+		/* hardware copies qtd out of qh overlay */
+		rmb ();
+		token = hc32_to_cpu(ehci, qtd->hw_token);
+
+		/* always clean up qtds the hc de-activated */
+ retry_xacterr:
+		if ((token & QTD_STS_ACTIVE) == 0) {
+
+			/* Report Data Buffer Error: non-fatal but useful */
+			if (token & QTD_STS_DBE)
+				ehci_dbg(ehci,
+					"detected DataBufferErr for urb %p ep%d%s len %d, qtd %p [qh %p]\n",
+					urb,
+					usb_endpoint_num(&urb->ep->desc),
+					usb_endpoint_dir_in(&urb->ep->desc) ? "in" : "out",
+					urb->transfer_buffer_length,
+					qtd,
+					qh);
+
+			/* on STALL, error, and short reads this urb must
+			 * complete and all its qtds must be recycled.
+			 */
+			if ((token & QTD_STS_HALT) != 0) {
+
+				/* retry transaction errors until we
+				 * reach the software xacterr limit
+				 */
+				if ((token & QTD_STS_XACT) &&
+						QTD_CERR(token) == 0 &&
+						++qh->xacterrs < QH_XACTERR_MAX &&
+						!urb->unlinked) {
+					ehci_dbg(ehci,
+	"detected XactErr len %zu/%zu retry %d\n",
+	qtd->length - QTD_LENGTH(token), qtd->length, qh->xacterrs);
+
+					/* reset the token in the qtd and the
+					 * qh overlay (which still contains
+					 * the qtd) so that we pick up from
+					 * where we left off
+					 */
+					token &= ~QTD_STS_HALT;
+					token |= QTD_STS_ACTIVE |
+							(EHCI_TUNE_CERR << 10);
+					qtd->hw_token = cpu_to_hc32(ehci,
+							token);
+					wmb();
+					hw->hw_token = cpu_to_hc32(ehci,
+							token);
+					goto retry_xacterr;
+				}
+				stopped = 1;
+				qh->unlink_reason |= QH_UNLINK_HALTED;
+
+			/* magic dummy for some short reads; qh won't advance.
+			 * that silicon quirk can kick in with this dummy too.
+			 *
+			 * other short reads won't stop the queue, including
+			 * control transfers (status stage handles that) or
+			 * most other single-qtd reads ... the queue stops if
+			 * URB_SHORT_NOT_OK was set so the driver submitting
+			 * the urbs could clean it up.
+			 */
+			} else if (IS_SHORT_READ (token)
+					&& !(qtd->hw_alt_next
+						& EHCI_LIST_END(ehci))) {
+				stopped = 1;
+				qh->unlink_reason |= QH_UNLINK_SHORT_READ;
+			}
+
+		/* stop scanning when we reach qtds the hc is using */
+		} else if (likely (!stopped
+				&& ehci->rh_state >= EHCI_RH_RUNNING)) {
+			break;
+
+		/* scan the whole queue for unlinks whenever it stops */
+		} else {
+			stopped = 1;
+
+			/* cancel everything if we halt, suspend, etc */
+			if (ehci->rh_state < EHCI_RH_RUNNING) {
+				last_status = -ESHUTDOWN;
+				qh->unlink_reason |= QH_UNLINK_SHUTDOWN;
+			}
+
+			/* this qtd is active; skip it unless a previous qtd
+			 * for its urb faulted, or its urb was canceled.
+			 */
+			else if (last_status == -EINPROGRESS && !urb->unlinked)
+				continue;
+
+			/*
+			 * If this was the active qtd when the qh was unlinked
+			 * and the overlay's token is active, then the overlay
+			 * hasn't been written back to the qtd yet so use its
+			 * token instead of the qtd's.  After the qtd is
+			 * processed and removed, the overlay won't be valid
+			 * any more.
+			 */
+			if (state == QH_STATE_IDLE &&
+					qh->qtd_list.next == &qtd->qtd_list &&
+					(hw->hw_token & ACTIVE_BIT(ehci))) {
+				token = hc32_to_cpu(ehci, hw->hw_token);
+				hw->hw_token &= ~ACTIVE_BIT(ehci);
+				qh->should_be_inactive = 1;
+
+				/* An unlink may leave an incomplete
+				 * async transaction in the TT buffer.
+				 * We have to clear it.
+				 */
+				ehci_clear_tt_buffer(ehci, qh, urb, token);
+			}
+		}
+
+		/* unless we already know the urb's status, collect qtd status
+		 * and update count of bytes transferred.  in common short read
+		 * cases with only one data qtd (including control transfers),
+		 * queue processing won't halt.  but with two or more qtds (for
+		 * example, with a 32 KB transfer), when the first qtd gets a
+		 * short read the second must be removed by hand.
+		 */
+		if (last_status == -EINPROGRESS) {
+			last_status = qtd_copy_status(ehci, urb,
+					qtd->length, token);
+			if (last_status == -EREMOTEIO
+					&& (qtd->hw_alt_next
+						& EHCI_LIST_END(ehci)))
+				last_status = -EINPROGRESS;
+
+			/* As part of low/full-speed endpoint-halt processing
+			 * we must clear the TT buffer (11.17.5).
+			 */
+			if (unlikely(last_status != -EINPROGRESS &&
+					last_status != -EREMOTEIO)) {
+				/* The TT's in some hubs malfunction when they
+				 * receive this request following a STALL (they
+				 * stop sending isochronous packets).  Since a
+				 * STALL can't leave the TT buffer in a busy
+				 * state (if you believe Figures 11-48 - 11-51
+				 * in the USB 2.0 spec), we won't clear the TT
+				 * buffer in this case.  Strictly speaking this
+				 * is a violation of the spec.
+				 */
+				if (last_status != -EPIPE)
+					ehci_clear_tt_buffer(ehci, qh, urb,
+							token);
+			}
+		}
+
+		/* if we're removing something not at the queue head,
+		 * patch the hardware queue pointer.
+		 */
+		if (stopped && qtd->qtd_list.prev != &qh->qtd_list) {
+			last = list_entry (qtd->qtd_list.prev,
+					struct ehci_qtd, qtd_list);
+			last->hw_next = qtd->hw_next;
+		}
+
+		/* remove qtd; it's recycled after possible urb completion */
+		list_del (&qtd->qtd_list);
+		last = qtd;
+
+		/* reinit the xacterr counter for the next qtd */
+		qh->xacterrs = 0;
+	}
+
+	/* last urb's completion might still need calling */
+	if (likely (last != NULL)) {
+		ehci_urb_done(ehci, last->urb, last_status);
+		ehci_qtd_free (ehci, last);
+	}
+
+	/* Do we need to rescan for URBs dequeued during a giveback? */
+	if (unlikely(qh->dequeue_during_giveback)) {
+		/* If the QH is already unlinked, do the rescan now. */
+		if (state == QH_STATE_IDLE)
+			goto rescan;
+
+		/* Otherwise the caller must unlink the QH. */
+	}
+
+	/* restore original state; caller must unlink or relink */
+	qh->qh_state = state;
+
+	/* be sure the hardware's done with the qh before refreshing
+	 * it after fault cleanup, or recovering from silicon wrongly
+	 * overlaying the dummy qtd (which reduces DMA chatter).
+	 *
+	 * We won't refresh a QH that's linked (after the HC
+	 * stopped the queue).  That avoids a race:
+	 *  - HC reads first part of QH;
+	 *  - CPU updates that first part and the token;
+	 *  - HC reads rest of that QH, including token
+	 * Result:  HC gets an inconsistent image, and then
+	 * DMAs to/from the wrong memory (corrupting it).
+	 *
+	 * That should be rare for interrupt transfers,
+	 * except maybe high bandwidth ...
+	 */
+	if (stopped != 0 || hw->hw_qtd_next == EHCI_LIST_END(ehci))
+		qh->unlink_reason |= QH_UNLINK_DUMMY_OVERLAY;
+
+	/* Let the caller know if the QH needs to be unlinked. */
+	return qh->unlink_reason;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * reverse of qh_urb_transaction:  free a list of TDs.
+ * used for cleanup after errors, before HC sees an URB's TDs.
+ */
+static void qtd_list_free (
+	struct ehci_hcd		*ehci,
+	struct urb		*urb,
+	struct list_head	*qtd_list
+) {
+	struct list_head	*entry, *temp;
+
+	list_for_each_safe (entry, temp, qtd_list) {
+		struct ehci_qtd	*qtd;
+
+		qtd = list_entry (entry, struct ehci_qtd, qtd_list);
+		list_del (&qtd->qtd_list);
+		ehci_qtd_free (ehci, qtd);
+	}
+}
+
+/*
+ * create a list of filled qtds for this URB; won't link into qh.
+ */
+static struct list_head *
+qh_urb_transaction (
+	struct ehci_hcd		*ehci,
+	struct urb		*urb,
+	struct list_head	*head,
+	gfp_t			flags
+) {
+	struct ehci_qtd		*qtd, *qtd_prev;
+	dma_addr_t		buf;
+	int			len, this_sg_len, maxpacket;
+	int			is_input;
+	u32			token;
+	int			i;
+	struct scatterlist	*sg;
+
+	/*
+	 * URBs map to sequences of QTDs:  one logical transaction
+	 */
+	qtd = ehci_qtd_alloc (ehci, flags);
+	if (unlikely (!qtd))
+		return NULL;
+	list_add_tail (&qtd->qtd_list, head);
+	qtd->urb = urb;
+
+	token = QTD_STS_ACTIVE;
+	token |= (EHCI_TUNE_CERR << 10);
+	/* for split transactions, SplitXState initialized to zero */
+
+	len = urb->transfer_buffer_length;
+	is_input = usb_pipein (urb->pipe);
+	if (usb_pipecontrol (urb->pipe)) {
+		/* SETUP pid */
+		qtd_fill(ehci, qtd, urb->setup_dma,
+				sizeof (struct usb_ctrlrequest),
+				token | (2 /* "setup" */ << 8), 8);
+
+		/* ... and always at least one more pid */
+		token ^= QTD_TOGGLE;
+		qtd_prev = qtd;
+		qtd = ehci_qtd_alloc (ehci, flags);
+		if (unlikely (!qtd))
+			goto cleanup;
+		qtd->urb = urb;
+		qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma);
+		list_add_tail (&qtd->qtd_list, head);
+
+		/* for zero length DATA stages, STATUS is always IN */
+		if (len == 0)
+			token |= (1 /* "in" */ << 8);
+	}
+
+	/*
+	 * data transfer stage:  buffer setup
+	 */
+	i = urb->num_mapped_sgs;
+	if (len > 0 && i > 0) {
+		sg = urb->sg;
+		buf = sg_dma_address(sg);
+
+		/* urb->transfer_buffer_length may be smaller than the
+		 * size of the scatterlist (or vice versa)
+		 */
+		this_sg_len = min_t(int, sg_dma_len(sg), len);
+	} else {
+		sg = NULL;
+		buf = urb->transfer_dma;
+		this_sg_len = len;
+	}
+
+	if (is_input)
+		token |= (1 /* "in" */ << 8);
+	/* else it's already initted to "out" pid (0 << 8) */
+
+	maxpacket = usb_endpoint_maxp(&urb->ep->desc);
+
+	/*
+	 * buffer gets wrapped in one or more qtds;
+	 * last one may be "short" (including zero len)
+	 * and may serve as a control status ack
+	 */
+	for (;;) {
+		unsigned int this_qtd_len;
+
+		this_qtd_len = qtd_fill(ehci, qtd, buf, this_sg_len, token,
+				maxpacket);
+		this_sg_len -= this_qtd_len;
+		len -= this_qtd_len;
+		buf += this_qtd_len;
+
+		/*
+		 * short reads advance to a "magic" dummy instead of the next
+		 * qtd ... that forces the queue to stop, for manual cleanup.
+		 * (this will usually be overridden later.)
+		 */
+		if (is_input)
+			qtd->hw_alt_next = ehci->async->hw->hw_alt_next;
+
+		/* qh makes control packets use qtd toggle; maybe switch it */
+		if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0)
+			token ^= QTD_TOGGLE;
+
+		if (likely(this_sg_len <= 0)) {
+			if (--i <= 0 || len <= 0)
+				break;
+			sg = sg_next(sg);
+			buf = sg_dma_address(sg);
+			this_sg_len = min_t(int, sg_dma_len(sg), len);
+		}
+
+		qtd_prev = qtd;
+		qtd = ehci_qtd_alloc (ehci, flags);
+		if (unlikely (!qtd))
+			goto cleanup;
+		qtd->urb = urb;
+		qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma);
+		list_add_tail (&qtd->qtd_list, head);
+	}
+
+	/*
+	 * unless the caller requires manual cleanup after short reads,
+	 * have the alt_next mechanism keep the queue running after the
+	 * last data qtd (the only one, for control and most other cases).
+	 */
+	if (likely ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0
+				|| usb_pipecontrol (urb->pipe)))
+		qtd->hw_alt_next = EHCI_LIST_END(ehci);
+
+	/*
+	 * control requests may need a terminating data "status" ack;
+	 * other OUT ones may need a terminating short packet
+	 * (zero length).
+	 */
+	if (likely (urb->transfer_buffer_length != 0)) {
+		int	one_more = 0;
+
+		if (usb_pipecontrol (urb->pipe)) {
+			one_more = 1;
+			token ^= 0x0100;	/* "in" <--> "out"  */
+			token |= QTD_TOGGLE;	/* force DATA1 */
+		} else if (usb_pipeout(urb->pipe)
+				&& (urb->transfer_flags & URB_ZERO_PACKET)
+				&& !(urb->transfer_buffer_length % maxpacket)) {
+			one_more = 1;
+		}
+		if (one_more) {
+			qtd_prev = qtd;
+			qtd = ehci_qtd_alloc (ehci, flags);
+			if (unlikely (!qtd))
+				goto cleanup;
+			qtd->urb = urb;
+			qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma);
+			list_add_tail (&qtd->qtd_list, head);
+
+			/* never any data in such packets */
+			qtd_fill(ehci, qtd, 0, 0, token, 0);
+		}
+	}
+
+	/* by default, enable interrupt on urb completion */
+	if (likely (!(urb->transfer_flags & URB_NO_INTERRUPT)))
+		qtd->hw_token |= cpu_to_hc32(ehci, QTD_IOC);
+	return head;
+
+cleanup:
+	qtd_list_free (ehci, urb, head);
+	return NULL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+// Would be best to create all qh's from config descriptors,
+// when each interface/altsetting is established.  Unlink
+// any previous qh and cancel its urbs first; endpoints are
+// implicitly reset then (data toggle too).
+// That'd mean updating how usbcore talks to HCDs. (2.7?)
+
+
+/*
+ * Each QH holds a qtd list; a QH is used for everything except iso.
+ *
+ * For interrupt urbs, the scheduler must set the microframe scheduling
+ * mask(s) each time the QH gets scheduled.  For highspeed, that's
+ * just one microframe in the s-mask.  For split interrupt transactions
+ * there are additional complications: c-mask, maybe FSTNs.
+ */
+static struct ehci_qh *
+qh_make (
+	struct ehci_hcd		*ehci,
+	struct urb		*urb,
+	gfp_t			flags
+) {
+	struct ehci_qh		*qh = ehci_qh_alloc (ehci, flags);
+	struct usb_host_endpoint *ep;
+	u32			info1 = 0, info2 = 0;
+	int			is_input, type;
+	int			maxp = 0;
+	int			mult;
+	struct usb_tt		*tt = urb->dev->tt;
+	struct ehci_qh_hw	*hw;
+
+	if (!qh)
+		return qh;
+
+	/*
+	 * init endpoint/device data for this QH
+	 */
+	info1 |= usb_pipeendpoint (urb->pipe) << 8;
+	info1 |= usb_pipedevice (urb->pipe) << 0;
+
+	is_input = usb_pipein (urb->pipe);
+	type = usb_pipetype (urb->pipe);
+	ep = usb_pipe_endpoint (urb->dev, urb->pipe);
+	maxp = usb_endpoint_maxp (&ep->desc);
+	mult = usb_endpoint_maxp_mult (&ep->desc);
+
+	/* 1024 byte maxpacket is a hardware ceiling.  High bandwidth
+	 * acts like up to 3KB, but is built from smaller packets.
+	 */
+	if (maxp > 1024) {
+		ehci_dbg(ehci, "bogus qh maxpacket %d\n", maxp);
+		goto done;
+	}
+
+	/* Compute interrupt scheduling parameters just once, and save.
+	 * - allowing for high bandwidth, how many nsec/uframe are used?
+	 * - split transactions need a second CSPLIT uframe; same question
+	 * - splits also need a schedule gap (for full/low speed I/O)
+	 * - qh has a polling interval
+	 *
+	 * For control/bulk requests, the HC or TT handles these.
+	 */
+	if (type == PIPE_INTERRUPT) {
+		unsigned	tmp;
+
+		qh->ps.usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH,
+				is_input, 0, mult * maxp));
+		qh->ps.phase = NO_FRAME;
+
+		if (urb->dev->speed == USB_SPEED_HIGH) {
+			qh->ps.c_usecs = 0;
+			qh->gap_uf = 0;
+
+			if (urb->interval > 1 && urb->interval < 8) {
+				/* NOTE interval 2 or 4 uframes could work.
+				 * But interval 1 scheduling is simpler, and
+				 * includes high bandwidth.
+				 */
+				urb->interval = 1;
+			} else if (urb->interval > ehci->periodic_size << 3) {
+				urb->interval = ehci->periodic_size << 3;
+			}
+			qh->ps.period = urb->interval >> 3;
+
+			/* period for bandwidth allocation */
+			tmp = min_t(unsigned, EHCI_BANDWIDTH_SIZE,
+					1 << (urb->ep->desc.bInterval - 1));
+
+			/* Allow urb->interval to override */
+			qh->ps.bw_uperiod = min_t(unsigned, tmp, urb->interval);
+			qh->ps.bw_period = qh->ps.bw_uperiod >> 3;
+		} else {
+			int		think_time;
+
+			/* gap is f(FS/LS transfer times) */
+			qh->gap_uf = 1 + usb_calc_bus_time (urb->dev->speed,
+					is_input, 0, maxp) / (125 * 1000);
+
+			/* FIXME this just approximates SPLIT/CSPLIT times */
+			if (is_input) {		// SPLIT, gap, CSPLIT+DATA
+				qh->ps.c_usecs = qh->ps.usecs + HS_USECS(0);
+				qh->ps.usecs = HS_USECS(1);
+			} else {		// SPLIT+DATA, gap, CSPLIT
+				qh->ps.usecs += HS_USECS(1);
+				qh->ps.c_usecs = HS_USECS(0);
+			}
+
+			think_time = tt ? tt->think_time : 0;
+			qh->ps.tt_usecs = NS_TO_US(think_time +
+					usb_calc_bus_time (urb->dev->speed,
+					is_input, 0, maxp));
+			if (urb->interval > ehci->periodic_size)
+				urb->interval = ehci->periodic_size;
+			qh->ps.period = urb->interval;
+
+			/* period for bandwidth allocation */
+			tmp = min_t(unsigned, EHCI_BANDWIDTH_FRAMES,
+					urb->ep->desc.bInterval);
+			tmp = rounddown_pow_of_two(tmp);
+
+			/* Allow urb->interval to override */
+			qh->ps.bw_period = min_t(unsigned, tmp, urb->interval);
+			qh->ps.bw_uperiod = qh->ps.bw_period << 3;
+		}
+	}
+
+	/* support for tt scheduling, and access to toggles */
+	qh->ps.udev = urb->dev;
+	qh->ps.ep = urb->ep;
+
+	/* using TT? */
+	switch (urb->dev->speed) {
+	case USB_SPEED_LOW:
+		info1 |= QH_LOW_SPEED;
+		fallthrough;
+
+	case USB_SPEED_FULL:
+		/* EPS 0 means "full" */
+		if (type != PIPE_INTERRUPT)
+			info1 |= (EHCI_TUNE_RL_TT << 28);
+		if (type == PIPE_CONTROL) {
+			info1 |= QH_CONTROL_EP;		/* for TT */
+			info1 |= QH_TOGGLE_CTL;		/* toggle from qtd */
+		}
+		info1 |= maxp << 16;
+
+		info2 |= (EHCI_TUNE_MULT_TT << 30);
+
+		/* Some Freescale processors have an erratum in which the
+		 * port number in the queue head was 0..N-1 instead of 1..N.
+		 */
+		if (ehci_has_fsl_portno_bug(ehci))
+			info2 |= (urb->dev->ttport-1) << 23;
+		else
+			info2 |= urb->dev->ttport << 23;
+
+		/* set the address of the TT; for TDI's integrated
+		 * root hub tt, leave it zeroed.
+		 */
+		if (tt && tt->hub != ehci_to_hcd(ehci)->self.root_hub)
+			info2 |= tt->hub->devnum << 16;
+
+		/* NOTE:  if (PIPE_INTERRUPT) { scheduler sets c-mask } */
+
+		break;
+
+	case USB_SPEED_HIGH:		/* no TT involved */
+		info1 |= QH_HIGH_SPEED;
+		if (type == PIPE_CONTROL) {
+			info1 |= (EHCI_TUNE_RL_HS << 28);
+			info1 |= 64 << 16;	/* usb2 fixed maxpacket */
+			info1 |= QH_TOGGLE_CTL;	/* toggle from qtd */
+			info2 |= (EHCI_TUNE_MULT_HS << 30);
+		} else if (type == PIPE_BULK) {
+			info1 |= (EHCI_TUNE_RL_HS << 28);
+			/* The USB spec says that high speed bulk endpoints
+			 * always use 512 byte maxpacket.  But some device
+			 * vendors decided to ignore that, and MSFT is happy
+			 * to help them do so.  So now people expect to use
+			 * such nonconformant devices with Linux too; sigh.
+			 */
+			info1 |= maxp << 16;
+			info2 |= (EHCI_TUNE_MULT_HS << 30);
+		} else {		/* PIPE_INTERRUPT */
+			info1 |= maxp << 16;
+			info2 |= mult << 30;
+		}
+		break;
+	default:
+		ehci_dbg(ehci, "bogus dev %p speed %d\n", urb->dev,
+			urb->dev->speed);
+done:
+		qh_destroy(ehci, qh);
+		return NULL;
+	}
+
+	/* NOTE:  if (PIPE_INTERRUPT) { scheduler sets s-mask } */
+
+	/* init as live, toggle clear */
+	qh->qh_state = QH_STATE_IDLE;
+	hw = qh->hw;
+	hw->hw_info1 = cpu_to_hc32(ehci, info1);
+	hw->hw_info2 = cpu_to_hc32(ehci, info2);
+	qh->is_out = !is_input;
+	usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
+	return qh;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void enable_async(struct ehci_hcd *ehci)
+{
+	if (ehci->async_count++)
+		return;
+
+	/* Stop waiting to turn off the async schedule */
+	ehci->enabled_hrtimer_events &= ~BIT(EHCI_HRTIMER_DISABLE_ASYNC);
+
+	/* Don't start the schedule until ASS is 0 */
+	ehci_poll_ASS(ehci);
+	turn_on_io_watchdog(ehci);
+}
+
+static void disable_async(struct ehci_hcd *ehci)
+{
+	if (--ehci->async_count)
+		return;
+
+	/* The async schedule and unlink lists are supposed to be empty */
+	WARN_ON(ehci->async->qh_next.qh || !list_empty(&ehci->async_unlink) ||
+			!list_empty(&ehci->async_idle));
+
+	/* Don't turn off the schedule until ASS is 1 */
+	ehci_poll_ASS(ehci);
+}
+
+/* move qh (and its qtds) onto async queue; maybe enable queue.  */
+
+static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
+{
+	__hc32		dma = QH_NEXT(ehci, qh->qh_dma);
+	struct ehci_qh	*head;
+
+	/* Don't link a QH if there's a Clear-TT-Buffer pending */
+	if (unlikely(qh->clearing_tt))
+		return;
+
+	WARN_ON(qh->qh_state != QH_STATE_IDLE);
+
+	/* clear halt and/or toggle; and maybe recover from silicon quirk */
+	qh_refresh(ehci, qh);
+
+	/* splice right after start */
+	head = ehci->async;
+	qh->qh_next = head->qh_next;
+	qh->hw->hw_next = head->hw->hw_next;
+	wmb ();
+
+	head->qh_next.qh = qh;
+	head->hw->hw_next = dma;
+
+	qh->qh_state = QH_STATE_LINKED;
+	qh->xacterrs = 0;
+	qh->unlink_reason = 0;
+	/* qtd completions reported later by interrupt */
+
+	enable_async(ehci);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * For control/bulk/interrupt, return QH with these TDs appended.
+ * Allocates and initializes the QH if necessary.
+ * Returns null if it can't allocate a QH it needs to.
+ * If the QH has TDs (urbs) already, that's great.
+ */
+static struct ehci_qh *qh_append_tds (
+	struct ehci_hcd		*ehci,
+	struct urb		*urb,
+	struct list_head	*qtd_list,
+	int			epnum,
+	void			**ptr
+)
+{
+	struct ehci_qh		*qh = NULL;
+	__hc32			qh_addr_mask = cpu_to_hc32(ehci, 0x7f);
+
+	qh = (struct ehci_qh *) *ptr;
+	if (unlikely (qh == NULL)) {
+		/* can't sleep here, we have ehci->lock... */
+		qh = qh_make (ehci, urb, GFP_ATOMIC);
+		*ptr = qh;
+	}
+	if (likely (qh != NULL)) {
+		struct ehci_qtd	*qtd;
+
+		if (unlikely (list_empty (qtd_list)))
+			qtd = NULL;
+		else
+			qtd = list_entry (qtd_list->next, struct ehci_qtd,
+					qtd_list);
+
+		/* control qh may need patching ... */
+		if (unlikely (epnum == 0)) {
+
+                        /* usb_reset_device() briefly reverts to address 0 */
+                        if (usb_pipedevice (urb->pipe) == 0)
+				qh->hw->hw_info1 &= ~qh_addr_mask;
+		}
+
+		/* just one way to queue requests: swap with the dummy qtd.
+		 * only hc or qh_refresh() ever modify the overlay.
+		 */
+		if (likely (qtd != NULL)) {
+			struct ehci_qtd		*dummy;
+			dma_addr_t		dma;
+			__hc32			token;
+
+			/* to avoid racing the HC, use the dummy td instead of
+			 * the first td of our list (becomes new dummy).  both
+			 * tds stay deactivated until we're done, when the
+			 * HC is allowed to fetch the old dummy (4.10.2).
+			 */
+			token = qtd->hw_token;
+			qtd->hw_token = HALT_BIT(ehci);
+
+			dummy = qh->dummy;
+
+			dma = dummy->qtd_dma;
+			*dummy = *qtd;
+			dummy->qtd_dma = dma;
+
+			list_del (&qtd->qtd_list);
+			list_add (&dummy->qtd_list, qtd_list);
+			list_splice_tail(qtd_list, &qh->qtd_list);
+
+			ehci_qtd_init(ehci, qtd, qtd->qtd_dma);
+			qh->dummy = qtd;
+
+			/* hc must see the new dummy at list end */
+			dma = qtd->qtd_dma;
+			qtd = list_entry (qh->qtd_list.prev,
+					struct ehci_qtd, qtd_list);
+			qtd->hw_next = QTD_NEXT(ehci, dma);
+
+			/* let the hc process these next qtds */
+			wmb ();
+			dummy->hw_token = token;
+
+			urb->hcpriv = qh;
+		}
+	}
+	return qh;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+submit_async (
+	struct ehci_hcd		*ehci,
+	struct urb		*urb,
+	struct list_head	*qtd_list,
+	gfp_t			mem_flags
+) {
+	int			epnum;
+	unsigned long		flags;
+	struct ehci_qh		*qh = NULL;
+	int			rc;
+
+	epnum = urb->ep->desc.bEndpointAddress;
+
+#ifdef EHCI_URB_TRACE
+	{
+		struct ehci_qtd *qtd;
+		qtd = list_entry(qtd_list->next, struct ehci_qtd, qtd_list);
+		ehci_dbg(ehci,
+			 "%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n",
+			 __func__, urb->dev->devpath, urb,
+			 epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out",
+			 urb->transfer_buffer_length,
+			 qtd, urb->ep->hcpriv);
+	}
+#endif
+
+	spin_lock_irqsave (&ehci->lock, flags);
+	if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
+		rc = -ESHUTDOWN;
+		goto done;
+	}
+	rc = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
+	if (unlikely(rc))
+		goto done;
+
+	qh = qh_append_tds(ehci, urb, qtd_list, epnum, &urb->ep->hcpriv);
+	if (unlikely(qh == NULL)) {
+		usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+		rc = -ENOMEM;
+		goto done;
+	}
+
+	/* Control/bulk operations through TTs don't need scheduling,
+	 * the HC and TT handle it when the TT has a buffer ready.
+	 */
+	if (likely (qh->qh_state == QH_STATE_IDLE))
+		qh_link_async(ehci, qh);
+ done:
+	spin_unlock_irqrestore (&ehci->lock, flags);
+	if (unlikely (qh == NULL))
+		qtd_list_free (ehci, urb, qtd_list);
+	return rc;
+}
+
+/*-------------------------------------------------------------------------*/
+#ifdef CONFIG_USB_HCD_TEST_MODE
+/*
+ * This function creates the qtds and submits them for the
+ * SINGLE_STEP_SET_FEATURE Test.
+ * This is done in two parts: first SETUP req for GetDesc is sent then
+ * 15 seconds later, the IN stage for GetDesc starts to req data from dev
+ *
+ * is_setup : i/p argument decides which of the two stage needs to be
+ * performed; TRUE - SETUP and FALSE - IN+STATUS
+ * Returns 0 if success
+ */
+static int ehci_submit_single_step_set_feature(
+	struct usb_hcd  *hcd,
+	struct urb      *urb,
+	int             is_setup
+) {
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	struct list_head	qtd_list;
+	struct list_head	*head;
+
+	struct ehci_qtd		*qtd, *qtd_prev;
+	dma_addr_t		buf;
+	int			len, maxpacket;
+	u32			token;
+
+	INIT_LIST_HEAD(&qtd_list);
+	head = &qtd_list;
+
+	/* URBs map to sequences of QTDs:  one logical transaction */
+	qtd = ehci_qtd_alloc(ehci, GFP_KERNEL);
+	if (unlikely(!qtd))
+		return -1;
+	list_add_tail(&qtd->qtd_list, head);
+	qtd->urb = urb;
+
+	token = QTD_STS_ACTIVE;
+	token |= (EHCI_TUNE_CERR << 10);
+
+	len = urb->transfer_buffer_length;
+	/*
+	 * Check if the request is to perform just the SETUP stage (getDesc)
+	 * as in SINGLE_STEP_SET_FEATURE test, DATA stage (IN) happens
+	 * 15 secs after the setup
+	 */
+	if (is_setup) {
+		/* SETUP pid, and interrupt after SETUP completion */
+		qtd_fill(ehci, qtd, urb->setup_dma,
+				sizeof(struct usb_ctrlrequest),
+				QTD_IOC | token | (2 /* "setup" */ << 8), 8);
+
+		submit_async(ehci, urb, &qtd_list, GFP_ATOMIC);
+		return 0; /*Return now; we shall come back after 15 seconds*/
+	}
+
+	/*
+	 * IN: data transfer stage:  buffer setup : start the IN txn phase for
+	 * the get_Desc SETUP which was sent 15seconds back
+	 */
+	token ^= QTD_TOGGLE;   /*We need to start IN with DATA-1 Pid-sequence*/
+	buf = urb->transfer_dma;
+
+	token |= (1 /* "in" */ << 8);  /*This is IN stage*/
+
+	maxpacket = usb_endpoint_maxp(&urb->ep->desc);
+
+	qtd_fill(ehci, qtd, buf, len, token, maxpacket);
+
+	/*
+	 * Our IN phase shall always be a short read; so keep the queue running
+	 * and let it advance to the next qtd which zero length OUT status
+	 */
+	qtd->hw_alt_next = EHCI_LIST_END(ehci);
+
+	/* STATUS stage for GetDesc control request */
+	token ^= 0x0100;        /* "in" <--> "out"  */
+	token |= QTD_TOGGLE;    /* force DATA1 */
+
+	qtd_prev = qtd;
+	qtd = ehci_qtd_alloc(ehci, GFP_ATOMIC);
+	if (unlikely(!qtd))
+		goto cleanup;
+	qtd->urb = urb;
+	qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma);
+	list_add_tail(&qtd->qtd_list, head);
+
+	/* Interrupt after STATUS completion */
+	qtd_fill(ehci, qtd, 0, 0, token | QTD_IOC, 0);
+
+	submit_async(ehci, urb, &qtd_list, GFP_KERNEL);
+
+	return 0;
+
+cleanup:
+	qtd_list_free(ehci, urb, head);
+	return -1;
+}
+#endif /* CONFIG_USB_HCD_TEST_MODE */
+
+/*-------------------------------------------------------------------------*/
+
+static void single_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh)
+{
+	struct ehci_qh		*prev;
+
+	/* Add to the end of the list of QHs waiting for the next IAAD */
+	qh->qh_state = QH_STATE_UNLINK_WAIT;
+	list_add_tail(&qh->unlink_node, &ehci->async_unlink);
+
+	/* Unlink it from the schedule */
+	prev = ehci->async;
+	while (prev->qh_next.qh != qh)
+		prev = prev->qh_next.qh;
+
+	prev->hw->hw_next = qh->hw->hw_next;
+	prev->qh_next = qh->qh_next;
+	if (ehci->qh_scan_next == qh)
+		ehci->qh_scan_next = qh->qh_next.qh;
+}
+
+static void start_iaa_cycle(struct ehci_hcd *ehci)
+{
+	/* If the controller isn't running, we don't have to wait for it */
+	if (unlikely(ehci->rh_state < EHCI_RH_RUNNING)) {
+		end_unlink_async(ehci);
+
+	/* Otherwise start a new IAA cycle if one isn't already running */
+	} else if (ehci->rh_state == EHCI_RH_RUNNING &&
+			!ehci->iaa_in_progress) {
+
+		/* Make sure the unlinks are all visible to the hardware */
+		wmb();
+
+		ehci_writel(ehci, ehci->command | CMD_IAAD,
+				&ehci->regs->command);
+		ehci_readl(ehci, &ehci->regs->command);
+		ehci->iaa_in_progress = true;
+		ehci_enable_event(ehci, EHCI_HRTIMER_IAA_WATCHDOG, true);
+	}
+}
+
+static void end_iaa_cycle(struct ehci_hcd *ehci)
+{
+	if (ehci->has_synopsys_hc_bug)
+		ehci_writel(ehci, (u32) ehci->async->qh_dma,
+			    &ehci->regs->async_next);
+
+	/* The current IAA cycle has ended */
+	ehci->iaa_in_progress = false;
+
+	end_unlink_async(ehci);
+}
+
+/* See if the async qh for the qtds being unlinked are now gone from the HC */
+
+static void end_unlink_async(struct ehci_hcd *ehci)
+{
+	struct ehci_qh		*qh;
+	bool			early_exit;
+
+	if (list_empty(&ehci->async_unlink))
+		return;
+	qh = list_first_entry(&ehci->async_unlink, struct ehci_qh,
+			unlink_node);	/* QH whose IAA cycle just ended */
+
+	/*
+	 * If async_unlinking is set then this routine is already running,
+	 * either on the stack or on another CPU.
+	 */
+	early_exit = ehci->async_unlinking;
+
+	/* If the controller isn't running, process all the waiting QHs */
+	if (ehci->rh_state < EHCI_RH_RUNNING)
+		list_splice_tail_init(&ehci->async_unlink, &ehci->async_idle);
+
+	/*
+	 * Intel (?) bug: The HC can write back the overlay region even
+	 * after the IAA interrupt occurs.  In self-defense, always go
+	 * through two IAA cycles for each QH.
+	 */
+	else if (qh->qh_state == QH_STATE_UNLINK) {
+		/*
+		 * Second IAA cycle has finished.  Process only the first
+		 * waiting QH (NVIDIA (?) bug).
+		 */
+		list_move_tail(&qh->unlink_node, &ehci->async_idle);
+	}
+
+	/*
+	 * AMD/ATI (?) bug: The HC can continue to use an active QH long
+	 * after the IAA interrupt occurs.  To prevent problems, QHs that
+	 * may still be active will wait until 2 ms have passed with no
+	 * change to the hw_current and hw_token fields (this delay occurs
+	 * between the two IAA cycles).
+	 *
+	 * The EHCI spec (4.8.2) says that active QHs must not be removed
+	 * from the async schedule and recommends waiting until the QH
+	 * goes inactive.  This is ridiculous because the QH will _never_
+	 * become inactive if the endpoint NAKs indefinitely.
+	 */
+
+	/* Some reasons for unlinking guarantee the QH can't be active */
+	else if (qh->unlink_reason & (QH_UNLINK_HALTED |
+			QH_UNLINK_SHORT_READ | QH_UNLINK_DUMMY_OVERLAY))
+		goto DelayDone;
+
+	/* The QH can't be active if the queue was and still is empty... */
+	else if	((qh->unlink_reason & QH_UNLINK_QUEUE_EMPTY) &&
+			list_empty(&qh->qtd_list))
+		goto DelayDone;
+
+	/* ... or if the QH has halted */
+	else if	(qh->hw->hw_token & cpu_to_hc32(ehci, QTD_STS_HALT))
+		goto DelayDone;
+
+	/* Otherwise we have to wait until the QH stops changing */
+	else {
+		__hc32		qh_current, qh_token;
+
+		qh_current = qh->hw->hw_current;
+		qh_token = qh->hw->hw_token;
+		if (qh_current != ehci->old_current ||
+				qh_token != ehci->old_token) {
+			ehci->old_current = qh_current;
+			ehci->old_token = qh_token;
+			ehci_enable_event(ehci,
+					EHCI_HRTIMER_ACTIVE_UNLINK, true);
+			return;
+		}
+ DelayDone:
+		qh->qh_state = QH_STATE_UNLINK;
+		early_exit = true;
+	}
+	ehci->old_current = ~0;		/* Prepare for next QH */
+
+	/* Start a new IAA cycle if any QHs are waiting for it */
+	if (!list_empty(&ehci->async_unlink))
+		start_iaa_cycle(ehci);
+
+	/*
+	 * Don't allow nesting or concurrent calls,
+	 * or wait for the second IAA cycle for the next QH.
+	 */
+	if (early_exit)
+		return;
+
+	/* Process the idle QHs */
+	ehci->async_unlinking = true;
+	while (!list_empty(&ehci->async_idle)) {
+		qh = list_first_entry(&ehci->async_idle, struct ehci_qh,
+				unlink_node);
+		list_del(&qh->unlink_node);
+
+		qh->qh_state = QH_STATE_IDLE;
+		qh->qh_next.qh = NULL;
+
+		if (!list_empty(&qh->qtd_list))
+			qh_completions(ehci, qh);
+		if (!list_empty(&qh->qtd_list) &&
+				ehci->rh_state == EHCI_RH_RUNNING)
+			qh_link_async(ehci, qh);
+		disable_async(ehci);
+	}
+	ehci->async_unlinking = false;
+}
+
+static void start_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh);
+
+static void unlink_empty_async(struct ehci_hcd *ehci)
+{
+	struct ehci_qh		*qh;
+	struct ehci_qh		*qh_to_unlink = NULL;
+	int			count = 0;
+
+	/* Find the last async QH which has been empty for a timer cycle */
+	for (qh = ehci->async->qh_next.qh; qh; qh = qh->qh_next.qh) {
+		if (list_empty(&qh->qtd_list) &&
+				qh->qh_state == QH_STATE_LINKED) {
+			++count;
+			if (qh->unlink_cycle != ehci->async_unlink_cycle)
+				qh_to_unlink = qh;
+		}
+	}
+
+	/* If nothing else is being unlinked, unlink the last empty QH */
+	if (list_empty(&ehci->async_unlink) && qh_to_unlink) {
+		qh_to_unlink->unlink_reason |= QH_UNLINK_QUEUE_EMPTY;
+		start_unlink_async(ehci, qh_to_unlink);
+		--count;
+	}
+
+	/* Other QHs will be handled later */
+	if (count > 0) {
+		ehci_enable_event(ehci, EHCI_HRTIMER_ASYNC_UNLINKS, true);
+		++ehci->async_unlink_cycle;
+	}
+}
+
+#ifdef	CONFIG_PM
+
+/* The root hub is suspended; unlink all the async QHs */
+static void unlink_empty_async_suspended(struct ehci_hcd *ehci)
+{
+	struct ehci_qh		*qh;
+
+	while (ehci->async->qh_next.qh) {
+		qh = ehci->async->qh_next.qh;
+		WARN_ON(!list_empty(&qh->qtd_list));
+		single_unlink_async(ehci, qh);
+	}
+}
+
+#endif
+
+/* makes sure the async qh will become idle */
+/* caller must own ehci->lock */
+
+static void start_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh)
+{
+	/* If the QH isn't linked then there's nothing we can do. */
+	if (qh->qh_state != QH_STATE_LINKED)
+		return;
+
+	single_unlink_async(ehci, qh);
+	start_iaa_cycle(ehci);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void scan_async (struct ehci_hcd *ehci)
+{
+	struct ehci_qh		*qh;
+	bool			check_unlinks_later = false;
+
+	ehci->qh_scan_next = ehci->async->qh_next.qh;
+	while (ehci->qh_scan_next) {
+		qh = ehci->qh_scan_next;
+		ehci->qh_scan_next = qh->qh_next.qh;
+
+		/* clean any finished work for this qh */
+		if (!list_empty(&qh->qtd_list)) {
+			int temp;
+
+			/*
+			 * Unlinks could happen here; completion reporting
+			 * drops the lock.  That's why ehci->qh_scan_next
+			 * always holds the next qh to scan; if the next qh
+			 * gets unlinked then ehci->qh_scan_next is adjusted
+			 * in single_unlink_async().
+			 */
+			temp = qh_completions(ehci, qh);
+			if (unlikely(temp)) {
+				start_unlink_async(ehci, qh);
+			} else if (list_empty(&qh->qtd_list)
+					&& qh->qh_state == QH_STATE_LINKED) {
+				qh->unlink_cycle = ehci->async_unlink_cycle;
+				check_unlinks_later = true;
+			}
+		}
+	}
+
+	/*
+	 * Unlink empty entries, reducing DMA usage as well
+	 * as HCD schedule-scanning costs.  Delay for any qh
+	 * we just scanned, there's a not-unusual case that it
+	 * doesn't stay idle for long.
+	 */
+	if (check_unlinks_later && ehci->rh_state == EHCI_RH_RUNNING &&
+			!(ehci->enabled_hrtimer_events &
+				BIT(EHCI_HRTIMER_ASYNC_UNLINKS))) {
+		ehci_enable_event(ehci, EHCI_HRTIMER_ASYNC_UNLINKS, true);
+		++ehci->async_unlink_cycle;
+	}
+}
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
new file mode 100644
index 000000000..bd542b6fc
--- /dev/null
+++ b/drivers/usb/host/ehci-sched.c
@@ -0,0 +1,2490 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2001-2004 by David Brownell
+ * Copyright (c) 2003 Michal Sojka, for high-speed iso transfers
+ */
+
+/* this file is part of ehci-hcd.c */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI scheduled transaction support:  interrupt, iso, split iso
+ * These are called "periodic" transactions in the EHCI spec.
+ *
+ * Note that for interrupt transfers, the QH/QTD manipulation is shared
+ * with the "asynchronous" transaction support (control/bulk transfers).
+ * The only real difference is in how interrupt transfers are scheduled.
+ *
+ * For ISO, we make an "iso_stream" head to serve the same role as a QH.
+ * It keeps track of every ITD (or SITD) that's linked, and holds enough
+ * pre-calculated schedule data to make appending to the queue be quick.
+ */
+
+static int ehci_get_frame(struct usb_hcd *hcd);
+
+/*
+ * periodic_next_shadow - return "next" pointer on shadow list
+ * @periodic: host pointer to qh/itd/sitd
+ * @tag: hardware tag for type of this record
+ */
+static union ehci_shadow *
+periodic_next_shadow(struct ehci_hcd *ehci, union ehci_shadow *periodic,
+		__hc32 tag)
+{
+	switch (hc32_to_cpu(ehci, tag)) {
+	case Q_TYPE_QH:
+		return &periodic->qh->qh_next;
+	case Q_TYPE_FSTN:
+		return &periodic->fstn->fstn_next;
+	case Q_TYPE_ITD:
+		return &periodic->itd->itd_next;
+	/* case Q_TYPE_SITD: */
+	default:
+		return &periodic->sitd->sitd_next;
+	}
+}
+
+static __hc32 *
+shadow_next_periodic(struct ehci_hcd *ehci, union ehci_shadow *periodic,
+		__hc32 tag)
+{
+	switch (hc32_to_cpu(ehci, tag)) {
+	/* our ehci_shadow.qh is actually software part */
+	case Q_TYPE_QH:
+		return &periodic->qh->hw->hw_next;
+	/* others are hw parts */
+	default:
+		return periodic->hw_next;
+	}
+}
+
+/* caller must hold ehci->lock */
+static void periodic_unlink(struct ehci_hcd *ehci, unsigned frame, void *ptr)
+{
+	union ehci_shadow	*prev_p = &ehci->pshadow[frame];
+	__hc32			*hw_p = &ehci->periodic[frame];
+	union ehci_shadow	here = *prev_p;
+
+	/* find predecessor of "ptr"; hw and shadow lists are in sync */
+	while (here.ptr && here.ptr != ptr) {
+		prev_p = periodic_next_shadow(ehci, prev_p,
+				Q_NEXT_TYPE(ehci, *hw_p));
+		hw_p = shadow_next_periodic(ehci, &here,
+				Q_NEXT_TYPE(ehci, *hw_p));
+		here = *prev_p;
+	}
+	/* an interrupt entry (at list end) could have been shared */
+	if (!here.ptr)
+		return;
+
+	/* update shadow and hardware lists ... the old "next" pointers
+	 * from ptr may still be in use, the caller updates them.
+	 */
+	*prev_p = *periodic_next_shadow(ehci, &here,
+			Q_NEXT_TYPE(ehci, *hw_p));
+
+	if (!ehci->use_dummy_qh ||
+	    *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p))
+			!= EHCI_LIST_END(ehci))
+		*hw_p = *shadow_next_periodic(ehci, &here,
+				Q_NEXT_TYPE(ehci, *hw_p));
+	else
+		*hw_p = cpu_to_hc32(ehci, ehci->dummy->qh_dma);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Bandwidth and TT management */
+
+/* Find the TT data structure for this device; create it if necessary */
+static struct ehci_tt *find_tt(struct usb_device *udev)
+{
+	struct usb_tt		*utt = udev->tt;
+	struct ehci_tt		*tt, **tt_index, **ptt;
+	unsigned		port;
+	bool			allocated_index = false;
+
+	if (!utt)
+		return NULL;		/* Not below a TT */
+
+	/*
+	 * Find/create our data structure.
+	 * For hubs with a single TT, we get it directly.
+	 * For hubs with multiple TTs, there's an extra level of pointers.
+	 */
+	tt_index = NULL;
+	if (utt->multi) {
+		tt_index = utt->hcpriv;
+		if (!tt_index) {		/* Create the index array */
+			tt_index = kcalloc(utt->hub->maxchild,
+					   sizeof(*tt_index),
+					   GFP_ATOMIC);
+			if (!tt_index)
+				return ERR_PTR(-ENOMEM);
+			utt->hcpriv = tt_index;
+			allocated_index = true;
+		}
+		port = udev->ttport - 1;
+		ptt = &tt_index[port];
+	} else {
+		port = 0;
+		ptt = (struct ehci_tt **) &utt->hcpriv;
+	}
+
+	tt = *ptt;
+	if (!tt) {				/* Create the ehci_tt */
+		struct ehci_hcd		*ehci =
+				hcd_to_ehci(bus_to_hcd(udev->bus));
+
+		tt = kzalloc(sizeof(*tt), GFP_ATOMIC);
+		if (!tt) {
+			if (allocated_index) {
+				utt->hcpriv = NULL;
+				kfree(tt_index);
+			}
+			return ERR_PTR(-ENOMEM);
+		}
+		list_add_tail(&tt->tt_list, &ehci->tt_list);
+		INIT_LIST_HEAD(&tt->ps_list);
+		tt->usb_tt = utt;
+		tt->tt_port = port;
+		*ptt = tt;
+	}
+
+	return tt;
+}
+
+/* Release the TT above udev, if it's not in use */
+static void drop_tt(struct usb_device *udev)
+{
+	struct usb_tt		*utt = udev->tt;
+	struct ehci_tt		*tt, **tt_index, **ptt;
+	int			cnt, i;
+
+	if (!utt || !utt->hcpriv)
+		return;		/* Not below a TT, or never allocated */
+
+	cnt = 0;
+	if (utt->multi) {
+		tt_index = utt->hcpriv;
+		ptt = &tt_index[udev->ttport - 1];
+
+		/* How many entries are left in tt_index? */
+		for (i = 0; i < utt->hub->maxchild; ++i)
+			cnt += !!tt_index[i];
+	} else {
+		tt_index = NULL;
+		ptt = (struct ehci_tt **) &utt->hcpriv;
+	}
+
+	tt = *ptt;
+	if (!tt || !list_empty(&tt->ps_list))
+		return;		/* never allocated, or still in use */
+
+	list_del(&tt->tt_list);
+	*ptt = NULL;
+	kfree(tt);
+	if (cnt == 1) {
+		utt->hcpriv = NULL;
+		kfree(tt_index);
+	}
+}
+
+static void bandwidth_dbg(struct ehci_hcd *ehci, int sign, char *type,
+		struct ehci_per_sched *ps)
+{
+	dev_dbg(&ps->udev->dev,
+			"ep %02x: %s %s @ %u+%u (%u.%u+%u) [%u/%u us] mask %04x\n",
+			ps->ep->desc.bEndpointAddress,
+			(sign >= 0 ? "reserve" : "release"), type,
+			(ps->bw_phase << 3) + ps->phase_uf, ps->bw_uperiod,
+			ps->phase, ps->phase_uf, ps->period,
+			ps->usecs, ps->c_usecs, ps->cs_mask);
+}
+
+static void reserve_release_intr_bandwidth(struct ehci_hcd *ehci,
+		struct ehci_qh *qh, int sign)
+{
+	unsigned		start_uf;
+	unsigned		i, j, m;
+	int			usecs = qh->ps.usecs;
+	int			c_usecs = qh->ps.c_usecs;
+	int			tt_usecs = qh->ps.tt_usecs;
+	struct ehci_tt		*tt;
+
+	if (qh->ps.phase == NO_FRAME)	/* Bandwidth wasn't reserved */
+		return;
+	start_uf = qh->ps.bw_phase << 3;
+
+	bandwidth_dbg(ehci, sign, "intr", &qh->ps);
+
+	if (sign < 0) {		/* Release bandwidth */
+		usecs = -usecs;
+		c_usecs = -c_usecs;
+		tt_usecs = -tt_usecs;
+	}
+
+	/* Entire transaction (high speed) or start-split (full/low speed) */
+	for (i = start_uf + qh->ps.phase_uf; i < EHCI_BANDWIDTH_SIZE;
+			i += qh->ps.bw_uperiod)
+		ehci->bandwidth[i] += usecs;
+
+	/* Complete-split (full/low speed) */
+	if (qh->ps.c_usecs) {
+		/* NOTE: adjustments needed for FSTN */
+		for (i = start_uf; i < EHCI_BANDWIDTH_SIZE;
+				i += qh->ps.bw_uperiod) {
+			for ((j = 2, m = 1 << (j+8)); j < 8; (++j, m <<= 1)) {
+				if (qh->ps.cs_mask & m)
+					ehci->bandwidth[i+j] += c_usecs;
+			}
+		}
+	}
+
+	/* FS/LS bus bandwidth */
+	if (tt_usecs) {
+		/*
+		 * find_tt() will not return any error here as we have
+		 * already called find_tt() before calling this function
+		 * and checked for any error return. The previous call
+		 * would have created the data structure.
+		 */
+		tt = find_tt(qh->ps.udev);
+		if (sign > 0)
+			list_add_tail(&qh->ps.ps_list, &tt->ps_list);
+		else
+			list_del(&qh->ps.ps_list);
+
+		for (i = start_uf >> 3; i < EHCI_BANDWIDTH_FRAMES;
+				i += qh->ps.bw_period)
+			tt->bandwidth[i] += tt_usecs;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void compute_tt_budget(u8 budget_table[EHCI_BANDWIDTH_SIZE],
+		struct ehci_tt *tt)
+{
+	struct ehci_per_sched	*ps;
+	unsigned		uframe, uf, x;
+	u8			*budget_line;
+
+	if (!tt)
+		return;
+	memset(budget_table, 0, EHCI_BANDWIDTH_SIZE);
+
+	/* Add up the contributions from all the endpoints using this TT */
+	list_for_each_entry(ps, &tt->ps_list, ps_list) {
+		for (uframe = ps->bw_phase << 3; uframe < EHCI_BANDWIDTH_SIZE;
+				uframe += ps->bw_uperiod) {
+			budget_line = &budget_table[uframe];
+			x = ps->tt_usecs;
+
+			/* propagate the time forward */
+			for (uf = ps->phase_uf; uf < 8; ++uf) {
+				x += budget_line[uf];
+
+				/* Each microframe lasts 125 us */
+				if (x <= 125) {
+					budget_line[uf] = x;
+					break;
+				}
+				budget_line[uf] = 125;
+				x -= 125;
+			}
+		}
+	}
+}
+
+static int __maybe_unused same_tt(struct usb_device *dev1,
+		struct usb_device *dev2)
+{
+	if (!dev1->tt || !dev2->tt)
+		return 0;
+	if (dev1->tt != dev2->tt)
+		return 0;
+	if (dev1->tt->multi)
+		return dev1->ttport == dev2->ttport;
+	else
+		return 1;
+}
+
+#ifdef CONFIG_USB_EHCI_TT_NEWSCHED
+
+static const unsigned char
+max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
+
+/* carryover low/fullspeed bandwidth that crosses uframe boundries */
+static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
+{
+	int i;
+
+	for (i = 0; i < 7; i++) {
+		if (max_tt_usecs[i] < tt_usecs[i]) {
+			tt_usecs[i+1] += tt_usecs[i] - max_tt_usecs[i];
+			tt_usecs[i] = max_tt_usecs[i];
+		}
+	}
+}
+
+/*
+ * Return true if the device's tt's downstream bus is available for a
+ * periodic transfer of the specified length (usecs), starting at the
+ * specified frame/uframe.  Note that (as summarized in section 11.19
+ * of the usb 2.0 spec) TTs can buffer multiple transactions for each
+ * uframe.
+ *
+ * The uframe parameter is when the fullspeed/lowspeed transfer
+ * should be executed in "B-frame" terms, which is the same as the
+ * highspeed ssplit's uframe (which is in "H-frame" terms).  For example
+ * a ssplit in "H-frame" 0 causes a transfer in "B-frame" 0.
+ * See the EHCI spec sec 4.5 and fig 4.7.
+ *
+ * This checks if the full/lowspeed bus, at the specified starting uframe,
+ * has the specified bandwidth available, according to rules listed
+ * in USB 2.0 spec section 11.18.1 fig 11-60.
+ *
+ * This does not check if the transfer would exceed the max ssplit
+ * limit of 16, specified in USB 2.0 spec section 11.18.4 requirement #4,
+ * since proper scheduling limits ssplits to less than 16 per uframe.
+ */
+static int tt_available(
+	struct ehci_hcd		*ehci,
+	struct ehci_per_sched	*ps,
+	struct ehci_tt		*tt,
+	unsigned		frame,
+	unsigned		uframe
+)
+{
+	unsigned		period = ps->bw_period;
+	unsigned		usecs = ps->tt_usecs;
+
+	if ((period == 0) || (uframe >= 7))	/* error */
+		return 0;
+
+	for (frame &= period - 1; frame < EHCI_BANDWIDTH_FRAMES;
+			frame += period) {
+		unsigned	i, uf;
+		unsigned short	tt_usecs[8];
+
+		if (tt->bandwidth[frame] + usecs > 900)
+			return 0;
+
+		uf = frame << 3;
+		for (i = 0; i < 8; (++i, ++uf))
+			tt_usecs[i] = ehci->tt_budget[uf];
+
+		if (max_tt_usecs[uframe] <= tt_usecs[uframe])
+			return 0;
+
+		/* special case for isoc transfers larger than 125us:
+		 * the first and each subsequent fully used uframe
+		 * must be empty, so as to not illegally delay
+		 * already scheduled transactions
+		 */
+		if (usecs > 125) {
+			int ufs = (usecs / 125);
+
+			for (i = uframe; i < (uframe + ufs) && i < 8; i++)
+				if (tt_usecs[i] > 0)
+					return 0;
+		}
+
+		tt_usecs[uframe] += usecs;
+
+		carryover_tt_bandwidth(tt_usecs);
+
+		/* fail if the carryover pushed bw past the last uframe's limit */
+		if (max_tt_usecs[7] < tt_usecs[7])
+			return 0;
+	}
+
+	return 1;
+}
+
+#else
+
+/* return true iff the device's transaction translator is available
+ * for a periodic transfer starting at the specified frame, using
+ * all the uframes in the mask.
+ */
+static int tt_no_collision(
+	struct ehci_hcd		*ehci,
+	unsigned		period,
+	struct usb_device	*dev,
+	unsigned		frame,
+	u32			uf_mask
+)
+{
+	if (period == 0)	/* error */
+		return 0;
+
+	/* note bandwidth wastage:  split never follows csplit
+	 * (different dev or endpoint) until the next uframe.
+	 * calling convention doesn't make that distinction.
+	 */
+	for (; frame < ehci->periodic_size; frame += period) {
+		union ehci_shadow	here;
+		__hc32			type;
+		struct ehci_qh_hw	*hw;
+
+		here = ehci->pshadow[frame];
+		type = Q_NEXT_TYPE(ehci, ehci->periodic[frame]);
+		while (here.ptr) {
+			switch (hc32_to_cpu(ehci, type)) {
+			case Q_TYPE_ITD:
+				type = Q_NEXT_TYPE(ehci, here.itd->hw_next);
+				here = here.itd->itd_next;
+				continue;
+			case Q_TYPE_QH:
+				hw = here.qh->hw;
+				if (same_tt(dev, here.qh->ps.udev)) {
+					u32		mask;
+
+					mask = hc32_to_cpu(ehci,
+							hw->hw_info2);
+					/* "knows" no gap is needed */
+					mask |= mask >> 8;
+					if (mask & uf_mask)
+						break;
+				}
+				type = Q_NEXT_TYPE(ehci, hw->hw_next);
+				here = here.qh->qh_next;
+				continue;
+			case Q_TYPE_SITD:
+				if (same_tt(dev, here.sitd->urb->dev)) {
+					u16		mask;
+
+					mask = hc32_to_cpu(ehci, here.sitd
+								->hw_uframe);
+					/* FIXME assumes no gap for IN! */
+					mask |= mask >> 8;
+					if (mask & uf_mask)
+						break;
+				}
+				type = Q_NEXT_TYPE(ehci, here.sitd->hw_next);
+				here = here.sitd->sitd_next;
+				continue;
+			/* case Q_TYPE_FSTN: */
+			default:
+				ehci_dbg(ehci,
+					"periodic frame %d bogus type %d\n",
+					frame, type);
+			}
+
+			/* collision or error */
+			return 0;
+		}
+	}
+
+	/* no collision */
+	return 1;
+}
+
+#endif /* CONFIG_USB_EHCI_TT_NEWSCHED */
+
+/*-------------------------------------------------------------------------*/
+
+static void enable_periodic(struct ehci_hcd *ehci)
+{
+	if (ehci->periodic_count++)
+		return;
+
+	/* Stop waiting to turn off the periodic schedule */
+	ehci->enabled_hrtimer_events &= ~BIT(EHCI_HRTIMER_DISABLE_PERIODIC);
+
+	/* Don't start the schedule until PSS is 0 */
+	ehci_poll_PSS(ehci);
+	turn_on_io_watchdog(ehci);
+}
+
+static void disable_periodic(struct ehci_hcd *ehci)
+{
+	if (--ehci->periodic_count)
+		return;
+
+	/* Don't turn off the schedule until PSS is 1 */
+	ehci_poll_PSS(ehci);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* periodic schedule slots have iso tds (normal or split) first, then a
+ * sparse tree for active interrupt transfers.
+ *
+ * this just links in a qh; caller guarantees uframe masks are set right.
+ * no FSTN support (yet; ehci 0.96+)
+ */
+static void qh_link_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh)
+{
+	unsigned	i;
+	unsigned	period = qh->ps.period;
+
+	dev_dbg(&qh->ps.udev->dev,
+		"link qh%d-%04x/%p start %d [%d/%d us]\n",
+		period, hc32_to_cpup(ehci, &qh->hw->hw_info2)
+			& (QH_CMASK | QH_SMASK),
+		qh, qh->ps.phase, qh->ps.usecs, qh->ps.c_usecs);
+
+	/* high bandwidth, or otherwise every microframe */
+	if (period == 0)
+		period = 1;
+
+	for (i = qh->ps.phase; i < ehci->periodic_size; i += period) {
+		union ehci_shadow	*prev = &ehci->pshadow[i];
+		__hc32			*hw_p = &ehci->periodic[i];
+		union ehci_shadow	here = *prev;
+		__hc32			type = 0;
+
+		/* skip the iso nodes at list head */
+		while (here.ptr) {
+			type = Q_NEXT_TYPE(ehci, *hw_p);
+			if (type == cpu_to_hc32(ehci, Q_TYPE_QH))
+				break;
+			prev = periodic_next_shadow(ehci, prev, type);
+			hw_p = shadow_next_periodic(ehci, &here, type);
+			here = *prev;
+		}
+
+		/* sorting each branch by period (slow-->fast)
+		 * enables sharing interior tree nodes
+		 */
+		while (here.ptr && qh != here.qh) {
+			if (qh->ps.period > here.qh->ps.period)
+				break;
+			prev = &here.qh->qh_next;
+			hw_p = &here.qh->hw->hw_next;
+			here = *prev;
+		}
+		/* link in this qh, unless some earlier pass did that */
+		if (qh != here.qh) {
+			qh->qh_next = here;
+			if (here.qh)
+				qh->hw->hw_next = *hw_p;
+			wmb();
+			prev->qh = qh;
+			*hw_p = QH_NEXT(ehci, qh->qh_dma);
+		}
+	}
+	qh->qh_state = QH_STATE_LINKED;
+	qh->xacterrs = 0;
+	qh->unlink_reason = 0;
+
+	/* update per-qh bandwidth for debugfs */
+	ehci_to_hcd(ehci)->self.bandwidth_allocated += qh->ps.bw_period
+		? ((qh->ps.usecs + qh->ps.c_usecs) / qh->ps.bw_period)
+		: (qh->ps.usecs * 8);
+
+	list_add(&qh->intr_node, &ehci->intr_qh_list);
+
+	/* maybe enable periodic schedule processing */
+	++ehci->intr_count;
+	enable_periodic(ehci);
+}
+
+static void qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh)
+{
+	unsigned	i;
+	unsigned	period;
+
+	/*
+	 * If qh is for a low/full-speed device, simply unlinking it
+	 * could interfere with an ongoing split transaction.  To unlink
+	 * it safely would require setting the QH_INACTIVATE bit and
+	 * waiting at least one frame, as described in EHCI 4.12.2.5.
+	 *
+	 * We won't bother with any of this.  Instead, we assume that the
+	 * only reason for unlinking an interrupt QH while the current URB
+	 * is still active is to dequeue all the URBs (flush the whole
+	 * endpoint queue).
+	 *
+	 * If rebalancing the periodic schedule is ever implemented, this
+	 * approach will no longer be valid.
+	 */
+
+	/* high bandwidth, or otherwise part of every microframe */
+	period = qh->ps.period ? : 1;
+
+	for (i = qh->ps.phase; i < ehci->periodic_size; i += period)
+		periodic_unlink(ehci, i, qh);
+
+	/* update per-qh bandwidth for debugfs */
+	ehci_to_hcd(ehci)->self.bandwidth_allocated -= qh->ps.bw_period
+		? ((qh->ps.usecs + qh->ps.c_usecs) / qh->ps.bw_period)
+		: (qh->ps.usecs * 8);
+
+	dev_dbg(&qh->ps.udev->dev,
+		"unlink qh%d-%04x/%p start %d [%d/%d us]\n",
+		qh->ps.period,
+		hc32_to_cpup(ehci, &qh->hw->hw_info2) & (QH_CMASK | QH_SMASK),
+		qh, qh->ps.phase, qh->ps.usecs, qh->ps.c_usecs);
+
+	/* qh->qh_next still "live" to HC */
+	qh->qh_state = QH_STATE_UNLINK;
+	qh->qh_next.ptr = NULL;
+
+	if (ehci->qh_scan_next == qh)
+		ehci->qh_scan_next = list_entry(qh->intr_node.next,
+				struct ehci_qh, intr_node);
+	list_del(&qh->intr_node);
+}
+
+static void cancel_unlink_wait_intr(struct ehci_hcd *ehci, struct ehci_qh *qh)
+{
+	if (qh->qh_state != QH_STATE_LINKED ||
+			list_empty(&qh->unlink_node))
+		return;
+
+	list_del_init(&qh->unlink_node);
+
+	/*
+	 * TODO: disable the event of EHCI_HRTIMER_START_UNLINK_INTR for
+	 * avoiding unnecessary CPU wakeup
+	 */
+}
+
+static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh)
+{
+	/* If the QH isn't linked then there's nothing we can do. */
+	if (qh->qh_state != QH_STATE_LINKED)
+		return;
+
+	/* if the qh is waiting for unlink, cancel it now */
+	cancel_unlink_wait_intr(ehci, qh);
+
+	qh_unlink_periodic(ehci, qh);
+
+	/* Make sure the unlinks are visible before starting the timer */
+	wmb();
+
+	/*
+	 * The EHCI spec doesn't say how long it takes the controller to
+	 * stop accessing an unlinked interrupt QH.  The timer delay is
+	 * 9 uframes; presumably that will be long enough.
+	 */
+	qh->unlink_cycle = ehci->intr_unlink_cycle;
+
+	/* New entries go at the end of the intr_unlink list */
+	list_add_tail(&qh->unlink_node, &ehci->intr_unlink);
+
+	if (ehci->intr_unlinking)
+		;	/* Avoid recursive calls */
+	else if (ehci->rh_state < EHCI_RH_RUNNING)
+		ehci_handle_intr_unlinks(ehci);
+	else if (ehci->intr_unlink.next == &qh->unlink_node) {
+		ehci_enable_event(ehci, EHCI_HRTIMER_UNLINK_INTR, true);
+		++ehci->intr_unlink_cycle;
+	}
+}
+
+/*
+ * It is common only one intr URB is scheduled on one qh, and
+ * given complete() is run in tasklet context, introduce a bit
+ * delay to avoid unlink qh too early.
+ */
+static void start_unlink_intr_wait(struct ehci_hcd *ehci,
+				   struct ehci_qh *qh)
+{
+	qh->unlink_cycle = ehci->intr_unlink_wait_cycle;
+
+	/* New entries go at the end of the intr_unlink_wait list */
+	list_add_tail(&qh->unlink_node, &ehci->intr_unlink_wait);
+
+	if (ehci->rh_state < EHCI_RH_RUNNING)
+		ehci_handle_start_intr_unlinks(ehci);
+	else if (ehci->intr_unlink_wait.next == &qh->unlink_node) {
+		ehci_enable_event(ehci, EHCI_HRTIMER_START_UNLINK_INTR, true);
+		++ehci->intr_unlink_wait_cycle;
+	}
+}
+
+static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh)
+{
+	struct ehci_qh_hw	*hw = qh->hw;
+	int			rc;
+
+	qh->qh_state = QH_STATE_IDLE;
+	hw->hw_next = EHCI_LIST_END(ehci);
+
+	if (!list_empty(&qh->qtd_list))
+		qh_completions(ehci, qh);
+
+	/* reschedule QH iff another request is queued */
+	if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) {
+		rc = qh_schedule(ehci, qh);
+		if (rc == 0) {
+			qh_refresh(ehci, qh);
+			qh_link_periodic(ehci, qh);
+		}
+
+		/* An error here likely indicates handshake failure
+		 * or no space left in the schedule.  Neither fault
+		 * should happen often ...
+		 *
+		 * FIXME kill the now-dysfunctional queued urbs
+		 */
+		else {
+			ehci_err(ehci, "can't reschedule qh %p, err %d\n",
+					qh, rc);
+		}
+	}
+
+	/* maybe turn off periodic schedule */
+	--ehci->intr_count;
+	disable_periodic(ehci);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int check_period(
+	struct ehci_hcd *ehci,
+	unsigned	frame,
+	unsigned	uframe,
+	unsigned	uperiod,
+	unsigned	usecs
+) {
+	/* complete split running into next frame?
+	 * given FSTN support, we could sometimes check...
+	 */
+	if (uframe >= 8)
+		return 0;
+
+	/* convert "usecs we need" to "max already claimed" */
+	usecs = ehci->uframe_periodic_max - usecs;
+
+	for (uframe += frame << 3; uframe < EHCI_BANDWIDTH_SIZE;
+			uframe += uperiod) {
+		if (ehci->bandwidth[uframe] > usecs)
+			return 0;
+	}
+
+	/* success! */
+	return 1;
+}
+
+static int check_intr_schedule(
+	struct ehci_hcd		*ehci,
+	unsigned		frame,
+	unsigned		uframe,
+	struct ehci_qh		*qh,
+	unsigned		*c_maskp,
+	struct ehci_tt		*tt
+)
+{
+	int		retval = -ENOSPC;
+	u8		mask = 0;
+
+	if (qh->ps.c_usecs && uframe >= 6)	/* FSTN territory? */
+		goto done;
+
+	if (!check_period(ehci, frame, uframe, qh->ps.bw_uperiod, qh->ps.usecs))
+		goto done;
+	if (!qh->ps.c_usecs) {
+		retval = 0;
+		*c_maskp = 0;
+		goto done;
+	}
+
+#ifdef CONFIG_USB_EHCI_TT_NEWSCHED
+	if (tt_available(ehci, &qh->ps, tt, frame, uframe)) {
+		unsigned i;
+
+		/* TODO : this may need FSTN for SSPLIT in uframe 5. */
+		for (i = uframe+2; i < 8 && i <= uframe+4; i++)
+			if (!check_period(ehci, frame, i,
+					qh->ps.bw_uperiod, qh->ps.c_usecs))
+				goto done;
+			else
+				mask |= 1 << i;
+
+		retval = 0;
+
+		*c_maskp = mask;
+	}
+#else
+	/* Make sure this tt's buffer is also available for CSPLITs.
+	 * We pessimize a bit; probably the typical full speed case
+	 * doesn't need the second CSPLIT.
+	 *
+	 * NOTE:  both SPLIT and CSPLIT could be checked in just
+	 * one smart pass...
+	 */
+	mask = 0x03 << (uframe + qh->gap_uf);
+	*c_maskp = mask;
+
+	mask |= 1 << uframe;
+	if (tt_no_collision(ehci, qh->ps.bw_period, qh->ps.udev, frame, mask)) {
+		if (!check_period(ehci, frame, uframe + qh->gap_uf + 1,
+				qh->ps.bw_uperiod, qh->ps.c_usecs))
+			goto done;
+		if (!check_period(ehci, frame, uframe + qh->gap_uf,
+				qh->ps.bw_uperiod, qh->ps.c_usecs))
+			goto done;
+		retval = 0;
+	}
+#endif
+done:
+	return retval;
+}
+
+/* "first fit" scheduling policy used the first time through,
+ * or when the previous schedule slot can't be re-used.
+ */
+static int qh_schedule(struct ehci_hcd *ehci, struct ehci_qh *qh)
+{
+	int		status = 0;
+	unsigned	uframe;
+	unsigned	c_mask;
+	struct ehci_qh_hw	*hw = qh->hw;
+	struct ehci_tt		*tt;
+
+	hw->hw_next = EHCI_LIST_END(ehci);
+
+	/* reuse the previous schedule slots, if we can */
+	if (qh->ps.phase != NO_FRAME) {
+		ehci_dbg(ehci, "reused qh %p schedule\n", qh);
+		return 0;
+	}
+
+	uframe = 0;
+	c_mask = 0;
+	tt = find_tt(qh->ps.udev);
+	if (IS_ERR(tt)) {
+		status = PTR_ERR(tt);
+		goto done;
+	}
+	compute_tt_budget(ehci->tt_budget, tt);
+
+	/* else scan the schedule to find a group of slots such that all
+	 * uframes have enough periodic bandwidth available.
+	 */
+	/* "normal" case, uframing flexible except with splits */
+	if (qh->ps.bw_period) {
+		int		i;
+		unsigned	frame;
+
+		for (i = qh->ps.bw_period; i > 0; --i) {
+			frame = ++ehci->random_frame & (qh->ps.bw_period - 1);
+			for (uframe = 0; uframe < 8; uframe++) {
+				status = check_intr_schedule(ehci,
+						frame, uframe, qh, &c_mask, tt);
+				if (status == 0)
+					goto got_it;
+			}
+		}
+
+	/* qh->ps.bw_period == 0 means every uframe */
+	} else {
+		status = check_intr_schedule(ehci, 0, 0, qh, &c_mask, tt);
+	}
+	if (status)
+		goto done;
+
+ got_it:
+	qh->ps.phase = (qh->ps.period ? ehci->random_frame &
+			(qh->ps.period - 1) : 0);
+	qh->ps.bw_phase = qh->ps.phase & (qh->ps.bw_period - 1);
+	qh->ps.phase_uf = uframe;
+	qh->ps.cs_mask = qh->ps.period ?
+			(c_mask << 8) | (1 << uframe) :
+			QH_SMASK;
+
+	/* reset S-frame and (maybe) C-frame masks */
+	hw->hw_info2 &= cpu_to_hc32(ehci, ~(QH_CMASK | QH_SMASK));
+	hw->hw_info2 |= cpu_to_hc32(ehci, qh->ps.cs_mask);
+	reserve_release_intr_bandwidth(ehci, qh, 1);
+
+done:
+	return status;
+}
+
+static int intr_submit(
+	struct ehci_hcd		*ehci,
+	struct urb		*urb,
+	struct list_head	*qtd_list,
+	gfp_t			mem_flags
+) {
+	unsigned		epnum;
+	unsigned long		flags;
+	struct ehci_qh		*qh;
+	int			status;
+	struct list_head	empty;
+
+	/* get endpoint and transfer/schedule data */
+	epnum = urb->ep->desc.bEndpointAddress;
+
+	spin_lock_irqsave(&ehci->lock, flags);
+
+	if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
+		status = -ESHUTDOWN;
+		goto done_not_linked;
+	}
+	status = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
+	if (unlikely(status))
+		goto done_not_linked;
+
+	/* get qh and force any scheduling errors */
+	INIT_LIST_HEAD(&empty);
+	qh = qh_append_tds(ehci, urb, &empty, epnum, &urb->ep->hcpriv);
+	if (qh == NULL) {
+		status = -ENOMEM;
+		goto done;
+	}
+	if (qh->qh_state == QH_STATE_IDLE) {
+		status = qh_schedule(ehci, qh);
+		if (status)
+			goto done;
+	}
+
+	/* then queue the urb's tds to the qh */
+	qh = qh_append_tds(ehci, urb, qtd_list, epnum, &urb->ep->hcpriv);
+	BUG_ON(qh == NULL);
+
+	/* stuff into the periodic schedule */
+	if (qh->qh_state == QH_STATE_IDLE) {
+		qh_refresh(ehci, qh);
+		qh_link_periodic(ehci, qh);
+	} else {
+		/* cancel unlink wait for the qh */
+		cancel_unlink_wait_intr(ehci, qh);
+	}
+
+	/* ... update usbfs periodic stats */
+	ehci_to_hcd(ehci)->self.bandwidth_int_reqs++;
+
+done:
+	if (unlikely(status))
+		usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+done_not_linked:
+	spin_unlock_irqrestore(&ehci->lock, flags);
+	if (status)
+		qtd_list_free(ehci, urb, qtd_list);
+
+	return status;
+}
+
+static void scan_intr(struct ehci_hcd *ehci)
+{
+	struct ehci_qh		*qh;
+
+	list_for_each_entry_safe(qh, ehci->qh_scan_next, &ehci->intr_qh_list,
+			intr_node) {
+
+		/* clean any finished work for this qh */
+		if (!list_empty(&qh->qtd_list)) {
+			int temp;
+
+			/*
+			 * Unlinks could happen here; completion reporting
+			 * drops the lock.  That's why ehci->qh_scan_next
+			 * always holds the next qh to scan; if the next qh
+			 * gets unlinked then ehci->qh_scan_next is adjusted
+			 * in qh_unlink_periodic().
+			 */
+			temp = qh_completions(ehci, qh);
+			if (unlikely(temp))
+				start_unlink_intr(ehci, qh);
+			else if (unlikely(list_empty(&qh->qtd_list) &&
+					qh->qh_state == QH_STATE_LINKED))
+				start_unlink_intr_wait(ehci, qh);
+		}
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* ehci_iso_stream ops work with both ITD and SITD */
+
+static struct ehci_iso_stream *
+iso_stream_alloc(gfp_t mem_flags)
+{
+	struct ehci_iso_stream *stream;
+
+	stream = kzalloc(sizeof(*stream), mem_flags);
+	if (likely(stream != NULL)) {
+		INIT_LIST_HEAD(&stream->td_list);
+		INIT_LIST_HEAD(&stream->free_list);
+		stream->next_uframe = NO_FRAME;
+		stream->ps.phase = NO_FRAME;
+	}
+	return stream;
+}
+
+static void
+iso_stream_init(
+	struct ehci_hcd		*ehci,
+	struct ehci_iso_stream	*stream,
+	struct urb		*urb
+)
+{
+	static const u8 smask_out[] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f };
+
+	struct usb_device	*dev = urb->dev;
+	u32			buf1;
+	unsigned		epnum, maxp;
+	int			is_input;
+	unsigned		tmp;
+
+	/*
+	 * this might be a "high bandwidth" highspeed endpoint,
+	 * as encoded in the ep descriptor's wMaxPacket field
+	 */
+	epnum = usb_pipeendpoint(urb->pipe);
+	is_input = usb_pipein(urb->pipe) ? USB_DIR_IN : 0;
+	maxp = usb_endpoint_maxp(&urb->ep->desc);
+	buf1 = is_input ? 1 << 11 : 0;
+
+	/* knows about ITD vs SITD */
+	if (dev->speed == USB_SPEED_HIGH) {
+		unsigned multi = usb_endpoint_maxp_mult(&urb->ep->desc);
+
+		stream->highspeed = 1;
+
+		buf1 |= maxp;
+		maxp *= multi;
+
+		stream->buf0 = cpu_to_hc32(ehci, (epnum << 8) | dev->devnum);
+		stream->buf1 = cpu_to_hc32(ehci, buf1);
+		stream->buf2 = cpu_to_hc32(ehci, multi);
+
+		/* usbfs wants to report the average usecs per frame tied up
+		 * when transfers on this endpoint are scheduled ...
+		 */
+		stream->ps.usecs = HS_USECS_ISO(maxp);
+
+		/* period for bandwidth allocation */
+		tmp = min_t(unsigned, EHCI_BANDWIDTH_SIZE,
+				1 << (urb->ep->desc.bInterval - 1));
+
+		/* Allow urb->interval to override */
+		stream->ps.bw_uperiod = min_t(unsigned, tmp, urb->interval);
+
+		stream->uperiod = urb->interval;
+		stream->ps.period = urb->interval >> 3;
+		stream->bandwidth = stream->ps.usecs * 8 /
+				stream->ps.bw_uperiod;
+
+	} else {
+		u32		addr;
+		int		think_time;
+		int		hs_transfers;
+
+		addr = dev->ttport << 24;
+		if (!ehci_is_TDI(ehci)
+				|| (dev->tt->hub !=
+					ehci_to_hcd(ehci)->self.root_hub))
+			addr |= dev->tt->hub->devnum << 16;
+		addr |= epnum << 8;
+		addr |= dev->devnum;
+		stream->ps.usecs = HS_USECS_ISO(maxp);
+		think_time = dev->tt->think_time;
+		stream->ps.tt_usecs = NS_TO_US(think_time + usb_calc_bus_time(
+				dev->speed, is_input, 1, maxp));
+		hs_transfers = max(1u, (maxp + 187) / 188);
+		if (is_input) {
+			u32	tmp;
+
+			addr |= 1 << 31;
+			stream->ps.c_usecs = stream->ps.usecs;
+			stream->ps.usecs = HS_USECS_ISO(1);
+			stream->ps.cs_mask = 1;
+
+			/* c-mask as specified in USB 2.0 11.18.4 3.c */
+			tmp = (1 << (hs_transfers + 2)) - 1;
+			stream->ps.cs_mask |= tmp << (8 + 2);
+		} else
+			stream->ps.cs_mask = smask_out[hs_transfers - 1];
+
+		/* period for bandwidth allocation */
+		tmp = min_t(unsigned, EHCI_BANDWIDTH_FRAMES,
+				1 << (urb->ep->desc.bInterval - 1));
+
+		/* Allow urb->interval to override */
+		stream->ps.bw_period = min_t(unsigned, tmp, urb->interval);
+		stream->ps.bw_uperiod = stream->ps.bw_period << 3;
+
+		stream->ps.period = urb->interval;
+		stream->uperiod = urb->interval << 3;
+		stream->bandwidth = (stream->ps.usecs + stream->ps.c_usecs) /
+				stream->ps.bw_period;
+
+		/* stream->splits gets created from cs_mask later */
+		stream->address = cpu_to_hc32(ehci, addr);
+	}
+
+	stream->ps.udev = dev;
+	stream->ps.ep = urb->ep;
+
+	stream->bEndpointAddress = is_input | epnum;
+	stream->maxp = maxp;
+}
+
+static struct ehci_iso_stream *
+iso_stream_find(struct ehci_hcd *ehci, struct urb *urb)
+{
+	unsigned		epnum;
+	struct ehci_iso_stream	*stream;
+	struct usb_host_endpoint *ep;
+	unsigned long		flags;
+
+	epnum = usb_pipeendpoint (urb->pipe);
+	if (usb_pipein(urb->pipe))
+		ep = urb->dev->ep_in[epnum];
+	else
+		ep = urb->dev->ep_out[epnum];
+
+	spin_lock_irqsave(&ehci->lock, flags);
+	stream = ep->hcpriv;
+
+	if (unlikely(stream == NULL)) {
+		stream = iso_stream_alloc(GFP_ATOMIC);
+		if (likely(stream != NULL)) {
+			ep->hcpriv = stream;
+			iso_stream_init(ehci, stream, urb);
+		}
+
+	/* if dev->ep [epnum] is a QH, hw is set */
+	} else if (unlikely(stream->hw != NULL)) {
+		ehci_dbg(ehci, "dev %s ep%d%s, not iso??\n",
+			urb->dev->devpath, epnum,
+			usb_pipein(urb->pipe) ? "in" : "out");
+		stream = NULL;
+	}
+
+	spin_unlock_irqrestore(&ehci->lock, flags);
+	return stream;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* ehci_iso_sched ops can be ITD-only or SITD-only */
+
+static struct ehci_iso_sched *
+iso_sched_alloc(unsigned packets, gfp_t mem_flags)
+{
+	struct ehci_iso_sched	*iso_sched;
+
+	iso_sched = kzalloc(struct_size(iso_sched, packet, packets), mem_flags);
+	if (likely(iso_sched != NULL))
+		INIT_LIST_HEAD(&iso_sched->td_list);
+
+	return iso_sched;
+}
+
+static inline void
+itd_sched_init(
+	struct ehci_hcd		*ehci,
+	struct ehci_iso_sched	*iso_sched,
+	struct ehci_iso_stream	*stream,
+	struct urb		*urb
+)
+{
+	unsigned	i;
+	dma_addr_t	dma = urb->transfer_dma;
+
+	/* how many uframes are needed for these transfers */
+	iso_sched->span = urb->number_of_packets * stream->uperiod;
+
+	/* figure out per-uframe itd fields that we'll need later
+	 * when we fit new itds into the schedule.
+	 */
+	for (i = 0; i < urb->number_of_packets; i++) {
+		struct ehci_iso_packet	*uframe = &iso_sched->packet[i];
+		unsigned		length;
+		dma_addr_t		buf;
+		u32			trans;
+
+		length = urb->iso_frame_desc[i].length;
+		buf = dma + urb->iso_frame_desc[i].offset;
+
+		trans = EHCI_ISOC_ACTIVE;
+		trans |= buf & 0x0fff;
+		if (unlikely(((i + 1) == urb->number_of_packets))
+				&& !(urb->transfer_flags & URB_NO_INTERRUPT))
+			trans |= EHCI_ITD_IOC;
+		trans |= length << 16;
+		uframe->transaction = cpu_to_hc32(ehci, trans);
+
+		/* might need to cross a buffer page within a uframe */
+		uframe->bufp = (buf & ~(u64)0x0fff);
+		buf += length;
+		if (unlikely((uframe->bufp != (buf & ~(u64)0x0fff))))
+			uframe->cross = 1;
+	}
+}
+
+static void
+iso_sched_free(
+	struct ehci_iso_stream	*stream,
+	struct ehci_iso_sched	*iso_sched
+)
+{
+	if (!iso_sched)
+		return;
+	/* caller must hold ehci->lock! */
+	list_splice(&iso_sched->td_list, &stream->free_list);
+	kfree(iso_sched);
+}
+
+static int
+itd_urb_transaction(
+	struct ehci_iso_stream	*stream,
+	struct ehci_hcd		*ehci,
+	struct urb		*urb,
+	gfp_t			mem_flags
+)
+{
+	struct ehci_itd		*itd;
+	dma_addr_t		itd_dma;
+	int			i;
+	unsigned		num_itds;
+	struct ehci_iso_sched	*sched;
+	unsigned long		flags;
+
+	sched = iso_sched_alloc(urb->number_of_packets, mem_flags);
+	if (unlikely(sched == NULL))
+		return -ENOMEM;
+
+	itd_sched_init(ehci, sched, stream, urb);
+
+	if (urb->interval < 8)
+		num_itds = 1 + (sched->span + 7) / 8;
+	else
+		num_itds = urb->number_of_packets;
+
+	/* allocate/init ITDs */
+	spin_lock_irqsave(&ehci->lock, flags);
+	for (i = 0; i < num_itds; i++) {
+
+		/*
+		 * Use iTDs from the free list, but not iTDs that may
+		 * still be in use by the hardware.
+		 */
+		if (likely(!list_empty(&stream->free_list))) {
+			itd = list_first_entry(&stream->free_list,
+					struct ehci_itd, itd_list);
+			if (itd->frame == ehci->now_frame)
+				goto alloc_itd;
+			list_del(&itd->itd_list);
+			itd_dma = itd->itd_dma;
+		} else {
+ alloc_itd:
+			spin_unlock_irqrestore(&ehci->lock, flags);
+			itd = dma_pool_alloc(ehci->itd_pool, mem_flags,
+					&itd_dma);
+			spin_lock_irqsave(&ehci->lock, flags);
+			if (!itd) {
+				iso_sched_free(stream, sched);
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				return -ENOMEM;
+			}
+		}
+
+		memset(itd, 0, sizeof(*itd));
+		itd->itd_dma = itd_dma;
+		itd->frame = NO_FRAME;
+		list_add(&itd->itd_list, &sched->td_list);
+	}
+	spin_unlock_irqrestore(&ehci->lock, flags);
+
+	/* temporarily store schedule info in hcpriv */
+	urb->hcpriv = sched;
+	urb->error_count = 0;
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void reserve_release_iso_bandwidth(struct ehci_hcd *ehci,
+		struct ehci_iso_stream *stream, int sign)
+{
+	unsigned		uframe;
+	unsigned		i, j;
+	unsigned		s_mask, c_mask, m;
+	int			usecs = stream->ps.usecs;
+	int			c_usecs = stream->ps.c_usecs;
+	int			tt_usecs = stream->ps.tt_usecs;
+	struct ehci_tt		*tt;
+
+	if (stream->ps.phase == NO_FRAME)	/* Bandwidth wasn't reserved */
+		return;
+	uframe = stream->ps.bw_phase << 3;
+
+	bandwidth_dbg(ehci, sign, "iso", &stream->ps);
+
+	if (sign < 0) {		/* Release bandwidth */
+		usecs = -usecs;
+		c_usecs = -c_usecs;
+		tt_usecs = -tt_usecs;
+	}
+
+	if (!stream->splits) {		/* High speed */
+		for (i = uframe + stream->ps.phase_uf; i < EHCI_BANDWIDTH_SIZE;
+				i += stream->ps.bw_uperiod)
+			ehci->bandwidth[i] += usecs;
+
+	} else {			/* Full speed */
+		s_mask = stream->ps.cs_mask;
+		c_mask = s_mask >> 8;
+
+		/* NOTE: adjustment needed for frame overflow */
+		for (i = uframe; i < EHCI_BANDWIDTH_SIZE;
+				i += stream->ps.bw_uperiod) {
+			for ((j = stream->ps.phase_uf, m = 1 << j); j < 8;
+					(++j, m <<= 1)) {
+				if (s_mask & m)
+					ehci->bandwidth[i+j] += usecs;
+				else if (c_mask & m)
+					ehci->bandwidth[i+j] += c_usecs;
+			}
+		}
+
+		/*
+		 * find_tt() will not return any error here as we have
+		 * already called find_tt() before calling this function
+		 * and checked for any error return. The previous call
+		 * would have created the data structure.
+		 */
+		tt = find_tt(stream->ps.udev);
+		if (sign > 0)
+			list_add_tail(&stream->ps.ps_list, &tt->ps_list);
+		else
+			list_del(&stream->ps.ps_list);
+
+		for (i = uframe >> 3; i < EHCI_BANDWIDTH_FRAMES;
+				i += stream->ps.bw_period)
+			tt->bandwidth[i] += tt_usecs;
+	}
+}
+
+static inline int
+itd_slot_ok(
+	struct ehci_hcd		*ehci,
+	struct ehci_iso_stream	*stream,
+	unsigned		uframe
+)
+{
+	unsigned		usecs;
+
+	/* convert "usecs we need" to "max already claimed" */
+	usecs = ehci->uframe_periodic_max - stream->ps.usecs;
+
+	for (uframe &= stream->ps.bw_uperiod - 1; uframe < EHCI_BANDWIDTH_SIZE;
+			uframe += stream->ps.bw_uperiod) {
+		if (ehci->bandwidth[uframe] > usecs)
+			return 0;
+	}
+	return 1;
+}
+
+static inline int
+sitd_slot_ok(
+	struct ehci_hcd		*ehci,
+	struct ehci_iso_stream	*stream,
+	unsigned		uframe,
+	struct ehci_iso_sched	*sched,
+	struct ehci_tt		*tt
+)
+{
+	unsigned		mask, tmp;
+	unsigned		frame, uf;
+
+	mask = stream->ps.cs_mask << (uframe & 7);
+
+	/* for OUT, don't wrap SSPLIT into H-microframe 7 */
+	if (((stream->ps.cs_mask & 0xff) << (uframe & 7)) >= (1 << 7))
+		return 0;
+
+	/* for IN, don't wrap CSPLIT into the next frame */
+	if (mask & ~0xffff)
+		return 0;
+
+	/* check bandwidth */
+	uframe &= stream->ps.bw_uperiod - 1;
+	frame = uframe >> 3;
+
+#ifdef CONFIG_USB_EHCI_TT_NEWSCHED
+	/* The tt's fullspeed bus bandwidth must be available.
+	 * tt_available scheduling guarantees 10+% for control/bulk.
+	 */
+	uf = uframe & 7;
+	if (!tt_available(ehci, &stream->ps, tt, frame, uf))
+		return 0;
+#else
+	/* tt must be idle for start(s), any gap, and csplit.
+	 * assume scheduling slop leaves 10+% for control/bulk.
+	 */
+	if (!tt_no_collision(ehci, stream->ps.bw_period,
+			stream->ps.udev, frame, mask))
+		return 0;
+#endif
+
+	do {
+		unsigned	max_used;
+		unsigned	i;
+
+		/* check starts (OUT uses more than one) */
+		uf = uframe;
+		max_used = ehci->uframe_periodic_max - stream->ps.usecs;
+		for (tmp = stream->ps.cs_mask & 0xff; tmp; tmp >>= 1, uf++) {
+			if (ehci->bandwidth[uf] > max_used)
+				return 0;
+		}
+
+		/* for IN, check CSPLIT */
+		if (stream->ps.c_usecs) {
+			max_used = ehci->uframe_periodic_max -
+					stream->ps.c_usecs;
+			uf = uframe & ~7;
+			tmp = 1 << (2+8);
+			for (i = (uframe & 7) + 2; i < 8; (++i, tmp <<= 1)) {
+				if ((stream->ps.cs_mask & tmp) == 0)
+					continue;
+				if (ehci->bandwidth[uf+i] > max_used)
+					return 0;
+			}
+		}
+
+		uframe += stream->ps.bw_uperiod;
+	} while (uframe < EHCI_BANDWIDTH_SIZE);
+
+	stream->ps.cs_mask <<= uframe & 7;
+	stream->splits = cpu_to_hc32(ehci, stream->ps.cs_mask);
+	return 1;
+}
+
+/*
+ * This scheduler plans almost as far into the future as it has actual
+ * periodic schedule slots.  (Affected by TUNE_FLS, which defaults to
+ * "as small as possible" to be cache-friendlier.)  That limits the size
+ * transfers you can stream reliably; avoid more than 64 msec per urb.
+ * Also avoid queue depths of less than ehci's worst irq latency (affected
+ * by the per-urb URB_NO_INTERRUPT hint, the log2_irq_thresh module parameter,
+ * and other factors); or more than about 230 msec total (for portability,
+ * given EHCI_TUNE_FLS and the slop).  Or, write a smarter scheduler!
+ */
+
+static int
+iso_stream_schedule(
+	struct ehci_hcd		*ehci,
+	struct urb		*urb,
+	struct ehci_iso_stream	*stream
+)
+{
+	u32			now, base, next, start, period, span, now2;
+	u32			wrap = 0, skip = 0;
+	int			status = 0;
+	unsigned		mod = ehci->periodic_size << 3;
+	struct ehci_iso_sched	*sched = urb->hcpriv;
+	bool			empty = list_empty(&stream->td_list);
+	bool			new_stream = false;
+
+	period = stream->uperiod;
+	span = sched->span;
+	if (!stream->highspeed)
+		span <<= 3;
+
+	/* Start a new isochronous stream? */
+	if (unlikely(empty && !hcd_periodic_completion_in_progress(
+			ehci_to_hcd(ehci), urb->ep))) {
+
+		/* Schedule the endpoint */
+		if (stream->ps.phase == NO_FRAME) {
+			int		done = 0;
+			struct ehci_tt	*tt = find_tt(stream->ps.udev);
+
+			if (IS_ERR(tt)) {
+				status = PTR_ERR(tt);
+				goto fail;
+			}
+			compute_tt_budget(ehci->tt_budget, tt);
+
+			start = ((-(++ehci->random_frame)) << 3) & (period - 1);
+
+			/* find a uframe slot with enough bandwidth.
+			 * Early uframes are more precious because full-speed
+			 * iso IN transfers can't use late uframes,
+			 * and therefore they should be allocated last.
+			 */
+			next = start;
+			start += period;
+			do {
+				start--;
+				/* check schedule: enough space? */
+				if (stream->highspeed) {
+					if (itd_slot_ok(ehci, stream, start))
+						done = 1;
+				} else {
+					if ((start % 8) >= 6)
+						continue;
+					if (sitd_slot_ok(ehci, stream, start,
+							sched, tt))
+						done = 1;
+				}
+			} while (start > next && !done);
+
+			/* no room in the schedule */
+			if (!done) {
+				ehci_dbg(ehci, "iso sched full %p", urb);
+				status = -ENOSPC;
+				goto fail;
+			}
+			stream->ps.phase = (start >> 3) &
+					(stream->ps.period - 1);
+			stream->ps.bw_phase = stream->ps.phase &
+					(stream->ps.bw_period - 1);
+			stream->ps.phase_uf = start & 7;
+			reserve_release_iso_bandwidth(ehci, stream, 1);
+		}
+
+		/* New stream is already scheduled; use the upcoming slot */
+		else {
+			start = (stream->ps.phase << 3) + stream->ps.phase_uf;
+		}
+
+		stream->next_uframe = start;
+		new_stream = true;
+	}
+
+	now = ehci_read_frame_index(ehci) & (mod - 1);
+
+	/* Take the isochronous scheduling threshold into account */
+	if (ehci->i_thresh)
+		next = now + ehci->i_thresh;	/* uframe cache */
+	else
+		next = (now + 2 + 7) & ~0x07;	/* full frame cache */
+
+	/* If needed, initialize last_iso_frame so that this URB will be seen */
+	if (ehci->isoc_count == 0)
+		ehci->last_iso_frame = now >> 3;
+
+	/*
+	 * Use ehci->last_iso_frame as the base.  There can't be any
+	 * TDs scheduled for earlier than that.
+	 */
+	base = ehci->last_iso_frame << 3;
+	next = (next - base) & (mod - 1);
+	start = (stream->next_uframe - base) & (mod - 1);
+
+	if (unlikely(new_stream))
+		goto do_ASAP;
+
+	/*
+	 * Typical case: reuse current schedule, stream may still be active.
+	 * Hopefully there are no gaps from the host falling behind
+	 * (irq delays etc).  If there are, the behavior depends on
+	 * whether URB_ISO_ASAP is set.
+	 */
+	now2 = (now - base) & (mod - 1);
+
+	/* Is the schedule about to wrap around? */
+	if (unlikely(!empty && start < period)) {
+		ehci_dbg(ehci, "request %p would overflow (%u-%u < %u mod %u)\n",
+				urb, stream->next_uframe, base, period, mod);
+		status = -EFBIG;
+		goto fail;
+	}
+
+	/* Is the next packet scheduled after the base time? */
+	if (likely(!empty || start <= now2 + period)) {
+
+		/* URB_ISO_ASAP: make sure that start >= next */
+		if (unlikely(start < next &&
+				(urb->transfer_flags & URB_ISO_ASAP)))
+			goto do_ASAP;
+
+		/* Otherwise use start, if it's not in the past */
+		if (likely(start >= now2))
+			goto use_start;
+
+	/* Otherwise we got an underrun while the queue was empty */
+	} else {
+		if (urb->transfer_flags & URB_ISO_ASAP)
+			goto do_ASAP;
+		wrap = mod;
+		now2 += mod;
+	}
+
+	/* How many uframes and packets do we need to skip? */
+	skip = (now2 - start + period - 1) & -period;
+	if (skip >= span) {		/* Entirely in the past? */
+		ehci_dbg(ehci, "iso underrun %p (%u+%u < %u) [%u]\n",
+				urb, start + base, span - period, now2 + base,
+				base);
+
+		/* Try to keep the last TD intact for scanning later */
+		skip = span - period;
+
+		/* Will it come before the current scan position? */
+		if (empty) {
+			skip = span;	/* Skip the entire URB */
+			status = 1;	/* and give it back immediately */
+			iso_sched_free(stream, sched);
+			sched = NULL;
+		}
+	}
+	urb->error_count = skip / period;
+	if (sched)
+		sched->first_packet = urb->error_count;
+	goto use_start;
+
+ do_ASAP:
+	/* Use the first slot after "next" */
+	start = next + ((start - next) & (period - 1));
+
+ use_start:
+	/* Tried to schedule too far into the future? */
+	if (unlikely(start + span - period >= mod + wrap)) {
+		ehci_dbg(ehci, "request %p would overflow (%u+%u >= %u)\n",
+				urb, start, span - period, mod + wrap);
+		status = -EFBIG;
+		goto fail;
+	}
+
+	start += base;
+	stream->next_uframe = (start + skip) & (mod - 1);
+
+	/* report high speed start in uframes; full speed, in frames */
+	urb->start_frame = start & (mod - 1);
+	if (!stream->highspeed)
+		urb->start_frame >>= 3;
+	return status;
+
+ fail:
+	iso_sched_free(stream, sched);
+	urb->hcpriv = NULL;
+	return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline void
+itd_init(struct ehci_hcd *ehci, struct ehci_iso_stream *stream,
+		struct ehci_itd *itd)
+{
+	int i;
+
+	/* it's been recently zeroed */
+	itd->hw_next = EHCI_LIST_END(ehci);
+	itd->hw_bufp[0] = stream->buf0;
+	itd->hw_bufp[1] = stream->buf1;
+	itd->hw_bufp[2] = stream->buf2;
+
+	for (i = 0; i < 8; i++)
+		itd->index[i] = -1;
+
+	/* All other fields are filled when scheduling */
+}
+
+static inline void
+itd_patch(
+	struct ehci_hcd		*ehci,
+	struct ehci_itd		*itd,
+	struct ehci_iso_sched	*iso_sched,
+	unsigned		index,
+	u16			uframe
+)
+{
+	struct ehci_iso_packet	*uf = &iso_sched->packet[index];
+	unsigned		pg = itd->pg;
+
+	/* BUG_ON(pg == 6 && uf->cross); */
+
+	uframe &= 0x07;
+	itd->index[uframe] = index;
+
+	itd->hw_transaction[uframe] = uf->transaction;
+	itd->hw_transaction[uframe] |= cpu_to_hc32(ehci, pg << 12);
+	itd->hw_bufp[pg] |= cpu_to_hc32(ehci, uf->bufp & ~(u32)0);
+	itd->hw_bufp_hi[pg] |= cpu_to_hc32(ehci, (u32)(uf->bufp >> 32));
+
+	/* iso_frame_desc[].offset must be strictly increasing */
+	if (unlikely(uf->cross)) {
+		u64	bufp = uf->bufp + 4096;
+
+		itd->pg = ++pg;
+		itd->hw_bufp[pg] |= cpu_to_hc32(ehci, bufp & ~(u32)0);
+		itd->hw_bufp_hi[pg] |= cpu_to_hc32(ehci, (u32)(bufp >> 32));
+	}
+}
+
+static inline void
+itd_link(struct ehci_hcd *ehci, unsigned frame, struct ehci_itd *itd)
+{
+	union ehci_shadow	*prev = &ehci->pshadow[frame];
+	__hc32			*hw_p = &ehci->periodic[frame];
+	union ehci_shadow	here = *prev;
+	__hc32			type = 0;
+
+	/* skip any iso nodes which might belong to previous microframes */
+	while (here.ptr) {
+		type = Q_NEXT_TYPE(ehci, *hw_p);
+		if (type == cpu_to_hc32(ehci, Q_TYPE_QH))
+			break;
+		prev = periodic_next_shadow(ehci, prev, type);
+		hw_p = shadow_next_periodic(ehci, &here, type);
+		here = *prev;
+	}
+
+	itd->itd_next = here;
+	itd->hw_next = *hw_p;
+	prev->itd = itd;
+	itd->frame = frame;
+	wmb();
+	*hw_p = cpu_to_hc32(ehci, itd->itd_dma | Q_TYPE_ITD);
+}
+
+/* fit urb's itds into the selected schedule slot; activate as needed */
+static void itd_link_urb(
+	struct ehci_hcd		*ehci,
+	struct urb		*urb,
+	unsigned		mod,
+	struct ehci_iso_stream	*stream
+)
+{
+	int			packet;
+	unsigned		next_uframe, uframe, frame;
+	struct ehci_iso_sched	*iso_sched = urb->hcpriv;
+	struct ehci_itd		*itd;
+
+	next_uframe = stream->next_uframe & (mod - 1);
+
+	if (unlikely(list_empty(&stream->td_list)))
+		ehci_to_hcd(ehci)->self.bandwidth_allocated
+				+= stream->bandwidth;
+
+	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+		if (ehci->amd_pll_fix == 1)
+			usb_amd_quirk_pll_disable();
+	}
+
+	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
+
+	/* fill iTDs uframe by uframe */
+	for (packet = iso_sched->first_packet, itd = NULL;
+			packet < urb->number_of_packets;) {
+		if (itd == NULL) {
+			/* ASSERT:  we have all necessary itds */
+			/* BUG_ON(list_empty(&iso_sched->td_list)); */
+
+			/* ASSERT:  no itds for this endpoint in this uframe */
+
+			itd = list_entry(iso_sched->td_list.next,
+					struct ehci_itd, itd_list);
+			list_move_tail(&itd->itd_list, &stream->td_list);
+			itd->stream = stream;
+			itd->urb = urb;
+			itd_init(ehci, stream, itd);
+		}
+
+		uframe = next_uframe & 0x07;
+		frame = next_uframe >> 3;
+
+		itd_patch(ehci, itd, iso_sched, packet, uframe);
+
+		next_uframe += stream->uperiod;
+		next_uframe &= mod - 1;
+		packet++;
+
+		/* link completed itds into the schedule */
+		if (((next_uframe >> 3) != frame)
+				|| packet == urb->number_of_packets) {
+			itd_link(ehci, frame & (ehci->periodic_size - 1), itd);
+			itd = NULL;
+		}
+	}
+	stream->next_uframe = next_uframe;
+
+	/* don't need that schedule data any more */
+	iso_sched_free(stream, iso_sched);
+	urb->hcpriv = stream;
+
+	++ehci->isoc_count;
+	enable_periodic(ehci);
+}
+
+#define	ISO_ERRS (EHCI_ISOC_BUF_ERR | EHCI_ISOC_BABBLE | EHCI_ISOC_XACTERR)
+
+/* Process and recycle a completed ITD.  Return true iff its urb completed,
+ * and hence its completion callback probably added things to the hardware
+ * schedule.
+ *
+ * Note that we carefully avoid recycling this descriptor until after any
+ * completion callback runs, so that it won't be reused quickly.  That is,
+ * assuming (a) no more than two urbs per frame on this endpoint, and also
+ * (b) only this endpoint's completions submit URBs.  It seems some silicon
+ * corrupts things if you reuse completed descriptors very quickly...
+ */
+static bool itd_complete(struct ehci_hcd *ehci, struct ehci_itd *itd)
+{
+	struct urb				*urb = itd->urb;
+	struct usb_iso_packet_descriptor	*desc;
+	u32					t;
+	unsigned				uframe;
+	int					urb_index = -1;
+	struct ehci_iso_stream			*stream = itd->stream;
+	bool					retval = false;
+
+	/* for each uframe with a packet */
+	for (uframe = 0; uframe < 8; uframe++) {
+		if (likely(itd->index[uframe] == -1))
+			continue;
+		urb_index = itd->index[uframe];
+		desc = &urb->iso_frame_desc[urb_index];
+
+		t = hc32_to_cpup(ehci, &itd->hw_transaction[uframe]);
+		itd->hw_transaction[uframe] = 0;
+
+		/* report transfer status */
+		if (unlikely(t & ISO_ERRS)) {
+			urb->error_count++;
+			if (t & EHCI_ISOC_BUF_ERR)
+				desc->status = usb_pipein(urb->pipe)
+					? -ENOSR  /* hc couldn't read */
+					: -ECOMM; /* hc couldn't write */
+			else if (t & EHCI_ISOC_BABBLE)
+				desc->status = -EOVERFLOW;
+			else /* (t & EHCI_ISOC_XACTERR) */
+				desc->status = -EPROTO;
+
+			/* HC need not update length with this error */
+			if (!(t & EHCI_ISOC_BABBLE)) {
+				desc->actual_length = EHCI_ITD_LENGTH(t);
+				urb->actual_length += desc->actual_length;
+			}
+		} else if (likely((t & EHCI_ISOC_ACTIVE) == 0)) {
+			desc->status = 0;
+			desc->actual_length = EHCI_ITD_LENGTH(t);
+			urb->actual_length += desc->actual_length;
+		} else {
+			/* URB was too late */
+			urb->error_count++;
+		}
+	}
+
+	/* handle completion now? */
+	if (likely((urb_index + 1) != urb->number_of_packets))
+		goto done;
+
+	/*
+	 * ASSERT: it's really the last itd for this urb
+	 * list_for_each_entry (itd, &stream->td_list, itd_list)
+	 *	 BUG_ON(itd->urb == urb);
+	 */
+
+	/* give urb back to the driver; completion often (re)submits */
+	ehci_urb_done(ehci, urb, 0);
+	retval = true;
+	urb = NULL;
+
+	--ehci->isoc_count;
+	disable_periodic(ehci);
+
+	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
+	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+		if (ehci->amd_pll_fix == 1)
+			usb_amd_quirk_pll_enable();
+	}
+
+	if (unlikely(list_is_singular(&stream->td_list)))
+		ehci_to_hcd(ehci)->self.bandwidth_allocated
+				-= stream->bandwidth;
+
+done:
+	itd->urb = NULL;
+
+	/* Add to the end of the free list for later reuse */
+	list_move_tail(&itd->itd_list, &stream->free_list);
+
+	/* Recycle the iTDs when the pipeline is empty (ep no longer in use) */
+	if (list_empty(&stream->td_list)) {
+		list_splice_tail_init(&stream->free_list,
+				&ehci->cached_itd_list);
+		start_free_itds(ehci);
+	}
+
+	return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int itd_submit(struct ehci_hcd *ehci, struct urb *urb,
+	gfp_t mem_flags)
+{
+	int			status = -EINVAL;
+	unsigned long		flags;
+	struct ehci_iso_stream	*stream;
+
+	/* Get iso_stream head */
+	stream = iso_stream_find(ehci, urb);
+	if (unlikely(stream == NULL)) {
+		ehci_dbg(ehci, "can't get iso stream\n");
+		return -ENOMEM;
+	}
+	if (unlikely(urb->interval != stream->uperiod)) {
+		ehci_dbg(ehci, "can't change iso interval %d --> %d\n",
+			stream->uperiod, urb->interval);
+		goto done;
+	}
+
+#ifdef EHCI_URB_TRACE
+	ehci_dbg(ehci,
+		"%s %s urb %p ep%d%s len %d, %d pkts %d uframes [%p]\n",
+		__func__, urb->dev->devpath, urb,
+		usb_pipeendpoint(urb->pipe),
+		usb_pipein(urb->pipe) ? "in" : "out",
+		urb->transfer_buffer_length,
+		urb->number_of_packets, urb->interval,
+		stream);
+#endif
+
+	/* allocate ITDs w/o locking anything */
+	status = itd_urb_transaction(stream, ehci, urb, mem_flags);
+	if (unlikely(status < 0)) {
+		ehci_dbg(ehci, "can't init itds\n");
+		goto done;
+	}
+
+	/* schedule ... need to lock */
+	spin_lock_irqsave(&ehci->lock, flags);
+	if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
+		status = -ESHUTDOWN;
+		goto done_not_linked;
+	}
+	status = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
+	if (unlikely(status))
+		goto done_not_linked;
+	status = iso_stream_schedule(ehci, urb, stream);
+	if (likely(status == 0)) {
+		itd_link_urb(ehci, urb, ehci->periodic_size << 3, stream);
+	} else if (status > 0) {
+		status = 0;
+		ehci_urb_done(ehci, urb, 0);
+	} else {
+		usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+	}
+ done_not_linked:
+	spin_unlock_irqrestore(&ehci->lock, flags);
+ done:
+	return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * "Split ISO TDs" ... used for USB 1.1 devices going through the
+ * TTs in USB 2.0 hubs.  These need microframe scheduling.
+ */
+
+static inline void
+sitd_sched_init(
+	struct ehci_hcd		*ehci,
+	struct ehci_iso_sched	*iso_sched,
+	struct ehci_iso_stream	*stream,
+	struct urb		*urb
+)
+{
+	unsigned	i;
+	dma_addr_t	dma = urb->transfer_dma;
+
+	/* how many frames are needed for these transfers */
+	iso_sched->span = urb->number_of_packets * stream->ps.period;
+
+	/* figure out per-frame sitd fields that we'll need later
+	 * when we fit new sitds into the schedule.
+	 */
+	for (i = 0; i < urb->number_of_packets; i++) {
+		struct ehci_iso_packet	*packet = &iso_sched->packet[i];
+		unsigned		length;
+		dma_addr_t		buf;
+		u32			trans;
+
+		length = urb->iso_frame_desc[i].length & 0x03ff;
+		buf = dma + urb->iso_frame_desc[i].offset;
+
+		trans = SITD_STS_ACTIVE;
+		if (((i + 1) == urb->number_of_packets)
+				&& !(urb->transfer_flags & URB_NO_INTERRUPT))
+			trans |= SITD_IOC;
+		trans |= length << 16;
+		packet->transaction = cpu_to_hc32(ehci, trans);
+
+		/* might need to cross a buffer page within a td */
+		packet->bufp = buf;
+		packet->buf1 = (buf + length) & ~0x0fff;
+		if (packet->buf1 != (buf & ~(u64)0x0fff))
+			packet->cross = 1;
+
+		/* OUT uses multiple start-splits */
+		if (stream->bEndpointAddress & USB_DIR_IN)
+			continue;
+		length = (length + 187) / 188;
+		if (length > 1) /* BEGIN vs ALL */
+			length |= 1 << 3;
+		packet->buf1 |= length;
+	}
+}
+
+static int
+sitd_urb_transaction(
+	struct ehci_iso_stream	*stream,
+	struct ehci_hcd		*ehci,
+	struct urb		*urb,
+	gfp_t			mem_flags
+)
+{
+	struct ehci_sitd	*sitd;
+	dma_addr_t		sitd_dma;
+	int			i;
+	struct ehci_iso_sched	*iso_sched;
+	unsigned long		flags;
+
+	iso_sched = iso_sched_alloc(urb->number_of_packets, mem_flags);
+	if (iso_sched == NULL)
+		return -ENOMEM;
+
+	sitd_sched_init(ehci, iso_sched, stream, urb);
+
+	/* allocate/init sITDs */
+	spin_lock_irqsave(&ehci->lock, flags);
+	for (i = 0; i < urb->number_of_packets; i++) {
+
+		/* NOTE:  for now, we don't try to handle wraparound cases
+		 * for IN (using sitd->hw_backpointer, like a FSTN), which
+		 * means we never need two sitds for full speed packets.
+		 */
+
+		/*
+		 * Use siTDs from the free list, but not siTDs that may
+		 * still be in use by the hardware.
+		 */
+		if (likely(!list_empty(&stream->free_list))) {
+			sitd = list_first_entry(&stream->free_list,
+					 struct ehci_sitd, sitd_list);
+			if (sitd->frame == ehci->now_frame)
+				goto alloc_sitd;
+			list_del(&sitd->sitd_list);
+			sitd_dma = sitd->sitd_dma;
+		} else {
+ alloc_sitd:
+			spin_unlock_irqrestore(&ehci->lock, flags);
+			sitd = dma_pool_alloc(ehci->sitd_pool, mem_flags,
+					&sitd_dma);
+			spin_lock_irqsave(&ehci->lock, flags);
+			if (!sitd) {
+				iso_sched_free(stream, iso_sched);
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				return -ENOMEM;
+			}
+		}
+
+		memset(sitd, 0, sizeof(*sitd));
+		sitd->sitd_dma = sitd_dma;
+		sitd->frame = NO_FRAME;
+		list_add(&sitd->sitd_list, &iso_sched->td_list);
+	}
+
+	/* temporarily store schedule info in hcpriv */
+	urb->hcpriv = iso_sched;
+	urb->error_count = 0;
+
+	spin_unlock_irqrestore(&ehci->lock, flags);
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline void
+sitd_patch(
+	struct ehci_hcd		*ehci,
+	struct ehci_iso_stream	*stream,
+	struct ehci_sitd	*sitd,
+	struct ehci_iso_sched	*iso_sched,
+	unsigned		index
+)
+{
+	struct ehci_iso_packet	*uf = &iso_sched->packet[index];
+	u64			bufp;
+
+	sitd->hw_next = EHCI_LIST_END(ehci);
+	sitd->hw_fullspeed_ep = stream->address;
+	sitd->hw_uframe = stream->splits;
+	sitd->hw_results = uf->transaction;
+	sitd->hw_backpointer = EHCI_LIST_END(ehci);
+
+	bufp = uf->bufp;
+	sitd->hw_buf[0] = cpu_to_hc32(ehci, bufp);
+	sitd->hw_buf_hi[0] = cpu_to_hc32(ehci, bufp >> 32);
+
+	sitd->hw_buf[1] = cpu_to_hc32(ehci, uf->buf1);
+	if (uf->cross)
+		bufp += 4096;
+	sitd->hw_buf_hi[1] = cpu_to_hc32(ehci, bufp >> 32);
+	sitd->index = index;
+}
+
+static inline void
+sitd_link(struct ehci_hcd *ehci, unsigned frame, struct ehci_sitd *sitd)
+{
+	/* note: sitd ordering could matter (CSPLIT then SSPLIT) */
+	sitd->sitd_next = ehci->pshadow[frame];
+	sitd->hw_next = ehci->periodic[frame];
+	ehci->pshadow[frame].sitd = sitd;
+	sitd->frame = frame;
+	wmb();
+	ehci->periodic[frame] = cpu_to_hc32(ehci, sitd->sitd_dma | Q_TYPE_SITD);
+}
+
+/* fit urb's sitds into the selected schedule slot; activate as needed */
+static void sitd_link_urb(
+	struct ehci_hcd		*ehci,
+	struct urb		*urb,
+	unsigned		mod,
+	struct ehci_iso_stream	*stream
+)
+{
+	int			packet;
+	unsigned		next_uframe;
+	struct ehci_iso_sched	*sched = urb->hcpriv;
+	struct ehci_sitd	*sitd;
+
+	next_uframe = stream->next_uframe;
+
+	if (list_empty(&stream->td_list))
+		/* usbfs ignores TT bandwidth */
+		ehci_to_hcd(ehci)->self.bandwidth_allocated
+				+= stream->bandwidth;
+
+	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+		if (ehci->amd_pll_fix == 1)
+			usb_amd_quirk_pll_disable();
+	}
+
+	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
+
+	/* fill sITDs frame by frame */
+	for (packet = sched->first_packet, sitd = NULL;
+			packet < urb->number_of_packets;
+			packet++) {
+
+		/* ASSERT:  we have all necessary sitds */
+		BUG_ON(list_empty(&sched->td_list));
+
+		/* ASSERT:  no itds for this endpoint in this frame */
+
+		sitd = list_entry(sched->td_list.next,
+				struct ehci_sitd, sitd_list);
+		list_move_tail(&sitd->sitd_list, &stream->td_list);
+		sitd->stream = stream;
+		sitd->urb = urb;
+
+		sitd_patch(ehci, stream, sitd, sched, packet);
+		sitd_link(ehci, (next_uframe >> 3) & (ehci->periodic_size - 1),
+				sitd);
+
+		next_uframe += stream->uperiod;
+	}
+	stream->next_uframe = next_uframe & (mod - 1);
+
+	/* don't need that schedule data any more */
+	iso_sched_free(stream, sched);
+	urb->hcpriv = stream;
+
+	++ehci->isoc_count;
+	enable_periodic(ehci);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define	SITD_ERRS (SITD_STS_ERR | SITD_STS_DBE | SITD_STS_BABBLE \
+				| SITD_STS_XACT | SITD_STS_MMF)
+
+/* Process and recycle a completed SITD.  Return true iff its urb completed,
+ * and hence its completion callback probably added things to the hardware
+ * schedule.
+ *
+ * Note that we carefully avoid recycling this descriptor until after any
+ * completion callback runs, so that it won't be reused quickly.  That is,
+ * assuming (a) no more than two urbs per frame on this endpoint, and also
+ * (b) only this endpoint's completions submit URBs.  It seems some silicon
+ * corrupts things if you reuse completed descriptors very quickly...
+ */
+static bool sitd_complete(struct ehci_hcd *ehci, struct ehci_sitd *sitd)
+{
+	struct urb				*urb = sitd->urb;
+	struct usb_iso_packet_descriptor	*desc;
+	u32					t;
+	int					urb_index;
+	struct ehci_iso_stream			*stream = sitd->stream;
+	bool					retval = false;
+
+	urb_index = sitd->index;
+	desc = &urb->iso_frame_desc[urb_index];
+	t = hc32_to_cpup(ehci, &sitd->hw_results);
+
+	/* report transfer status */
+	if (unlikely(t & SITD_ERRS)) {
+		urb->error_count++;
+		if (t & SITD_STS_DBE)
+			desc->status = usb_pipein(urb->pipe)
+				? -ENOSR  /* hc couldn't read */
+				: -ECOMM; /* hc couldn't write */
+		else if (t & SITD_STS_BABBLE)
+			desc->status = -EOVERFLOW;
+		else /* XACT, MMF, etc */
+			desc->status = -EPROTO;
+	} else if (unlikely(t & SITD_STS_ACTIVE)) {
+		/* URB was too late */
+		urb->error_count++;
+	} else {
+		desc->status = 0;
+		desc->actual_length = desc->length - SITD_LENGTH(t);
+		urb->actual_length += desc->actual_length;
+	}
+
+	/* handle completion now? */
+	if ((urb_index + 1) != urb->number_of_packets)
+		goto done;
+
+	/*
+	 * ASSERT: it's really the last sitd for this urb
+	 * list_for_each_entry (sitd, &stream->td_list, sitd_list)
+	 *	 BUG_ON(sitd->urb == urb);
+	 */
+
+	/* give urb back to the driver; completion often (re)submits */
+	ehci_urb_done(ehci, urb, 0);
+	retval = true;
+	urb = NULL;
+
+	--ehci->isoc_count;
+	disable_periodic(ehci);
+
+	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
+	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+		if (ehci->amd_pll_fix == 1)
+			usb_amd_quirk_pll_enable();
+	}
+
+	if (list_is_singular(&stream->td_list))
+		ehci_to_hcd(ehci)->self.bandwidth_allocated
+				-= stream->bandwidth;
+
+done:
+	sitd->urb = NULL;
+
+	/* Add to the end of the free list for later reuse */
+	list_move_tail(&sitd->sitd_list, &stream->free_list);
+
+	/* Recycle the siTDs when the pipeline is empty (ep no longer in use) */
+	if (list_empty(&stream->td_list)) {
+		list_splice_tail_init(&stream->free_list,
+				&ehci->cached_sitd_list);
+		start_free_itds(ehci);
+	}
+
+	return retval;
+}
+
+
+static int sitd_submit(struct ehci_hcd *ehci, struct urb *urb,
+	gfp_t mem_flags)
+{
+	int			status = -EINVAL;
+	unsigned long		flags;
+	struct ehci_iso_stream	*stream;
+
+	/* Get iso_stream head */
+	stream = iso_stream_find(ehci, urb);
+	if (stream == NULL) {
+		ehci_dbg(ehci, "can't get iso stream\n");
+		return -ENOMEM;
+	}
+	if (urb->interval != stream->ps.period) {
+		ehci_dbg(ehci, "can't change iso interval %d --> %d\n",
+			stream->ps.period, urb->interval);
+		goto done;
+	}
+
+#ifdef EHCI_URB_TRACE
+	ehci_dbg(ehci,
+		"submit %p dev%s ep%d%s-iso len %d\n",
+		urb, urb->dev->devpath,
+		usb_pipeendpoint(urb->pipe),
+		usb_pipein(urb->pipe) ? "in" : "out",
+		urb->transfer_buffer_length);
+#endif
+
+	/* allocate SITDs */
+	status = sitd_urb_transaction(stream, ehci, urb, mem_flags);
+	if (status < 0) {
+		ehci_dbg(ehci, "can't init sitds\n");
+		goto done;
+	}
+
+	/* schedule ... need to lock */
+	spin_lock_irqsave(&ehci->lock, flags);
+	if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
+		status = -ESHUTDOWN;
+		goto done_not_linked;
+	}
+	status = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
+	if (unlikely(status))
+		goto done_not_linked;
+	status = iso_stream_schedule(ehci, urb, stream);
+	if (likely(status == 0)) {
+		sitd_link_urb(ehci, urb, ehci->periodic_size << 3, stream);
+	} else if (status > 0) {
+		status = 0;
+		ehci_urb_done(ehci, urb, 0);
+	} else {
+		usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+	}
+ done_not_linked:
+	spin_unlock_irqrestore(&ehci->lock, flags);
+ done:
+	return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void scan_isoc(struct ehci_hcd *ehci)
+{
+	unsigned		uf, now_frame, frame;
+	unsigned		fmask = ehci->periodic_size - 1;
+	bool			modified, live;
+	union ehci_shadow	q, *q_p;
+	__hc32			type, *hw_p;
+
+	/*
+	 * When running, scan from last scan point up to "now"
+	 * else clean up by scanning everything that's left.
+	 * Touches as few pages as possible:  cache-friendly.
+	 */
+	if (ehci->rh_state >= EHCI_RH_RUNNING) {
+		uf = ehci_read_frame_index(ehci);
+		now_frame = (uf >> 3) & fmask;
+		live = true;
+	} else  {
+		now_frame = (ehci->last_iso_frame - 1) & fmask;
+		live = false;
+	}
+	ehci->now_frame = now_frame;
+
+	frame = ehci->last_iso_frame;
+
+restart:
+	/* Scan each element in frame's queue for completions */
+	q_p = &ehci->pshadow[frame];
+	hw_p = &ehci->periodic[frame];
+	q.ptr = q_p->ptr;
+	type = Q_NEXT_TYPE(ehci, *hw_p);
+	modified = false;
+
+	while (q.ptr != NULL) {
+		switch (hc32_to_cpu(ehci, type)) {
+		case Q_TYPE_ITD:
+			/*
+			 * If this ITD is still active, leave it for
+			 * later processing ... check the next entry.
+			 * No need to check for activity unless the
+			 * frame is current.
+			 */
+			if (frame == now_frame && live) {
+				rmb();
+				for (uf = 0; uf < 8; uf++) {
+					if (q.itd->hw_transaction[uf] &
+							ITD_ACTIVE(ehci))
+						break;
+				}
+				if (uf < 8) {
+					q_p = &q.itd->itd_next;
+					hw_p = &q.itd->hw_next;
+					type = Q_NEXT_TYPE(ehci,
+							q.itd->hw_next);
+					q = *q_p;
+					break;
+				}
+			}
+
+			/*
+			 * Take finished ITDs out of the schedule
+			 * and process them:  recycle, maybe report
+			 * URB completion.  HC won't cache the
+			 * pointer for much longer, if at all.
+			 */
+			*q_p = q.itd->itd_next;
+			if (!ehci->use_dummy_qh ||
+					q.itd->hw_next != EHCI_LIST_END(ehci))
+				*hw_p = q.itd->hw_next;
+			else
+				*hw_p = cpu_to_hc32(ehci, ehci->dummy->qh_dma);
+			type = Q_NEXT_TYPE(ehci, q.itd->hw_next);
+			wmb();
+			modified = itd_complete(ehci, q.itd);
+			q = *q_p;
+			break;
+		case Q_TYPE_SITD:
+			/*
+			 * If this SITD is still active, leave it for
+			 * later processing ... check the next entry.
+			 * No need to check for activity unless the
+			 * frame is current.
+			 */
+			if (((frame == now_frame) ||
+					(((frame + 1) & fmask) == now_frame))
+				&& live
+				&& (q.sitd->hw_results & SITD_ACTIVE(ehci))) {
+
+				q_p = &q.sitd->sitd_next;
+				hw_p = &q.sitd->hw_next;
+				type = Q_NEXT_TYPE(ehci, q.sitd->hw_next);
+				q = *q_p;
+				break;
+			}
+
+			/*
+			 * Take finished SITDs out of the schedule
+			 * and process them:  recycle, maybe report
+			 * URB completion.
+			 */
+			*q_p = q.sitd->sitd_next;
+			if (!ehci->use_dummy_qh ||
+					q.sitd->hw_next != EHCI_LIST_END(ehci))
+				*hw_p = q.sitd->hw_next;
+			else
+				*hw_p = cpu_to_hc32(ehci, ehci->dummy->qh_dma);
+			type = Q_NEXT_TYPE(ehci, q.sitd->hw_next);
+			wmb();
+			modified = sitd_complete(ehci, q.sitd);
+			q = *q_p;
+			break;
+		default:
+			ehci_dbg(ehci, "corrupt type %d frame %d shadow %p\n",
+					type, frame, q.ptr);
+			/* BUG(); */
+			fallthrough;
+		case Q_TYPE_QH:
+		case Q_TYPE_FSTN:
+			/* End of the iTDs and siTDs */
+			q.ptr = NULL;
+			break;
+		}
+
+		/* Assume completion callbacks modify the queue */
+		if (unlikely(modified && ehci->isoc_count > 0))
+			goto restart;
+	}
+
+	/* Stop when we have reached the current frame */
+	if (frame == now_frame)
+		return;
+
+	/* The last frame may still have active siTDs */
+	ehci->last_iso_frame = frame;
+	frame = (frame + 1) & fmask;
+
+	goto restart;
+}
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
new file mode 100644
index 000000000..c25c51d26
--- /dev/null
+++ b/drivers/usb/host/ehci-sh.c
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SuperH EHCI host controller driver
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * Based on ohci-sh.c and ehci-atmel.c.
+ */
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+struct ehci_sh_priv {
+	struct clk *iclk, *fclk;
+	struct usb_hcd *hcd;
+};
+
+static int ehci_sh_reset(struct usb_hcd *hcd)
+{
+	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
+
+	ehci->caps = hcd->regs;
+
+	return ehci_setup(hcd);
+}
+
+static const struct hc_driver ehci_sh_hc_driver = {
+	.description			= hcd_name,
+	.product_desc			= "SuperH EHCI",
+	.hcd_priv_size			= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq				= ehci_irq,
+	.flags				= HCD_USB2 | HCD_DMA | HCD_MEMORY | HCD_BH,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset				= ehci_sh_reset,
+	.start				= ehci_run,
+	.stop				= ehci_stop,
+	.shutdown			= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue			= ehci_urb_enqueue,
+	.urb_dequeue			= ehci_urb_dequeue,
+	.endpoint_disable		= ehci_endpoint_disable,
+	.endpoint_reset			= ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number		= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data		= ehci_hub_status_data,
+	.hub_control			= ehci_hub_control,
+
+#ifdef CONFIG_PM
+	.bus_suspend			= ehci_bus_suspend,
+	.bus_resume			= ehci_bus_resume,
+#endif
+
+	.relinquish_port		= ehci_relinquish_port,
+	.port_handed_over		= ehci_port_handed_over,
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_hcd_sh_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct ehci_sh_priv *priv;
+	struct usb_hcd *hcd;
+	int irq, ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		ret = -ENODEV;
+		goto fail_create_hcd;
+	}
+
+	/* initialize hcd */
+	hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev,
+			     dev_name(&pdev->dev));
+	if (!hcd) {
+		ret = -ENOMEM;
+		goto fail_create_hcd;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(hcd->regs)) {
+		ret = PTR_ERR(hcd->regs);
+		goto fail_request_resource;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct ehci_sh_priv),
+			    GFP_KERNEL);
+	if (!priv) {
+		ret = -ENOMEM;
+		goto fail_request_resource;
+	}
+
+	/* These are optional, we don't care if they fail */
+	priv->fclk = devm_clk_get(&pdev->dev, "usb_fck");
+	if (IS_ERR(priv->fclk))
+		priv->fclk = NULL;
+
+	priv->iclk = devm_clk_get(&pdev->dev, "usb_ick");
+	if (IS_ERR(priv->iclk))
+		priv->iclk = NULL;
+
+	clk_enable(priv->fclk);
+	clk_enable(priv->iclk);
+
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to add hcd");
+		goto fail_add_hcd;
+	}
+	device_wakeup_enable(hcd->self.controller);
+
+	priv->hcd = hcd;
+	platform_set_drvdata(pdev, priv);
+
+	return ret;
+
+fail_add_hcd:
+	clk_disable(priv->iclk);
+	clk_disable(priv->fclk);
+
+fail_request_resource:
+	usb_put_hcd(hcd);
+fail_create_hcd:
+	dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), ret);
+
+	return ret;
+}
+
+static int ehci_hcd_sh_remove(struct platform_device *pdev)
+{
+	struct ehci_sh_priv *priv = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = priv->hcd;
+
+	usb_remove_hcd(hcd);
+	usb_put_hcd(hcd);
+
+	clk_disable(priv->fclk);
+	clk_disable(priv->iclk);
+
+	return 0;
+}
+
+static void ehci_hcd_sh_shutdown(struct platform_device *pdev)
+{
+	struct ehci_sh_priv *priv = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = priv->hcd;
+
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
+}
+
+static struct platform_driver ehci_hcd_sh_driver = {
+	.probe		= ehci_hcd_sh_probe,
+	.remove		= ehci_hcd_sh_remove,
+	.shutdown	= ehci_hcd_sh_shutdown,
+	.driver		= {
+		.name	= "sh_ehci",
+	},
+};
+
+MODULE_ALIAS("platform:sh_ehci");
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
new file mode 100644
index 000000000..c4ddd1022
--- /dev/null
+++ b/drivers/usb/host/ehci-spear.c
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+* Driver for EHCI HCD on SPEAr SOC
+*
+* Copyright (C) 2010 ST Micro Electronics,
+* Deepak Sikri <deepak.sikri@st.com>
+*
+* Based on various ehci-*.c drivers
+*/
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ehci.h"
+
+#define DRIVER_DESC "EHCI SPEAr driver"
+
+struct spear_ehci {
+	struct clk *clk;
+};
+
+#define to_spear_ehci(hcd)	(struct spear_ehci *)(hcd_to_ehci(hcd)->priv)
+
+static struct hc_driver __read_mostly ehci_spear_hc_driver;
+
+static int __maybe_unused ehci_spear_drv_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	bool do_wakeup = device_may_wakeup(dev);
+
+	return ehci_suspend(hcd, do_wakeup);
+}
+
+static int __maybe_unused ehci_spear_drv_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	ehci_resume(hcd, false);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend,
+		ehci_spear_drv_resume);
+
+static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd ;
+	struct spear_ehci *sehci;
+	struct resource *res;
+	struct clk *usbh_clk;
+	const struct hc_driver *driver = &ehci_spear_hc_driver;
+	int irq, retval;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		retval = irq;
+		goto fail;
+	}
+
+	/*
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	retval = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (retval)
+		goto fail;
+
+	usbh_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(usbh_clk)) {
+		dev_err(&pdev->dev, "Error getting interface clock\n");
+		retval = PTR_ERR(usbh_clk);
+		goto fail;
+	}
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto fail;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(hcd->regs)) {
+		retval = PTR_ERR(hcd->regs);
+		goto err_put_hcd;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	sehci = to_spear_ehci(hcd);
+	sehci->clk = usbh_clk;
+
+	/* registers start at offset 0x0 */
+	hcd_to_ehci(hcd)->caps = hcd->regs;
+
+	clk_prepare_enable(sehci->clk);
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval)
+		goto err_stop_ehci;
+
+	device_wakeup_enable(hcd->self.controller);
+	return retval;
+
+err_stop_ehci:
+	clk_disable_unprepare(sehci->clk);
+err_put_hcd:
+	usb_put_hcd(hcd);
+fail:
+	dev_err(&pdev->dev, "init fail, %d\n", retval);
+
+	return retval ;
+}
+
+static int spear_ehci_hcd_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct spear_ehci *sehci = to_spear_ehci(hcd);
+
+	usb_remove_hcd(hcd);
+
+	if (sehci->clk)
+		clk_disable_unprepare(sehci->clk);
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+static const struct of_device_id spear_ehci_id_table[] = {
+	{ .compatible = "st,spear600-ehci", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, spear_ehci_id_table);
+
+static struct platform_driver spear_ehci_hcd_driver = {
+	.probe		= spear_ehci_hcd_drv_probe,
+	.remove		= spear_ehci_hcd_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name = "spear-ehci",
+		.bus = &platform_bus_type,
+		.pm = pm_ptr(&ehci_spear_pm_ops),
+		.of_match_table = spear_ehci_id_table,
+	}
+};
+
+static const struct ehci_driver_overrides spear_overrides __initconst = {
+	.extra_priv_size = sizeof(struct spear_ehci),
+};
+
+static int __init ehci_spear_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ehci_init_driver(&ehci_spear_hc_driver, &spear_overrides);
+	return platform_driver_register(&spear_ehci_hcd_driver);
+}
+module_init(ehci_spear_init);
+
+static void __exit ehci_spear_cleanup(void)
+{
+	platform_driver_unregister(&spear_ehci_hcd_driver);
+}
+module_exit(ehci_spear_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_ALIAS("platform:spear-ehci");
+MODULE_AUTHOR("Deepak Sikri");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci-st.c b/drivers/usb/host/ehci-st.c
new file mode 100644
index 000000000..f731dc98c
--- /dev/null
+++ b/drivers/usb/host/ehci-st.c
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ST EHCI driver
+ *
+ * Copyright (C) 2014 STMicroelectronics – All Rights Reserved
+ *
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * Derived from ehci-platform.c
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/pinctrl/consumer.h>
+
+#include "ehci.h"
+
+#define USB_MAX_CLKS 3
+
+struct st_ehci_platform_priv {
+	struct clk *clks[USB_MAX_CLKS];
+	struct clk *clk48;
+	struct reset_control *rst;
+	struct reset_control *pwr;
+	struct phy *phy;
+};
+
+#define DRIVER_DESC "EHCI STMicroelectronics driver"
+
+#define hcd_to_ehci_priv(h) \
+	((struct st_ehci_platform_priv *)hcd_to_ehci(h)->priv)
+
+#define EHCI_CAPS_SIZE 0x10
+#define AHB2STBUS_INSREG01 (EHCI_CAPS_SIZE + 0x84)
+
+static int st_ehci_platform_reset(struct usb_hcd *hcd)
+{
+	struct platform_device *pdev = to_platform_device(hcd->self.controller);
+	struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	u32 threshold;
+
+	/* Set EHCI packet buffer IN/OUT threshold to 128 bytes */
+	threshold = 128 | (128 << 16);
+	writel(threshold, hcd->regs + AHB2STBUS_INSREG01);
+
+	ehci->caps = hcd->regs + pdata->caps_offset;
+	return ehci_setup(hcd);
+}
+
+static int st_ehci_platform_power_on(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct st_ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int clk, ret;
+
+	ret = reset_control_deassert(priv->pwr);
+	if (ret)
+		return ret;
+
+	ret = reset_control_deassert(priv->rst);
+	if (ret)
+		goto err_assert_power;
+
+	/* some SoCs don't have a dedicated 48Mhz clock, but those that do
+	   need the rate to be explicitly set */
+	if (priv->clk48) {
+		ret = clk_set_rate(priv->clk48, 48000000);
+		if (ret)
+			goto err_assert_reset;
+	}
+
+	for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++) {
+		ret = clk_prepare_enable(priv->clks[clk]);
+		if (ret)
+			goto err_disable_clks;
+	}
+
+	ret = phy_init(priv->phy);
+	if (ret)
+		goto err_disable_clks;
+
+	ret = phy_power_on(priv->phy);
+	if (ret)
+		goto err_exit_phy;
+
+	return 0;
+
+err_exit_phy:
+	phy_exit(priv->phy);
+err_disable_clks:
+	while (--clk >= 0)
+		clk_disable_unprepare(priv->clks[clk]);
+err_assert_reset:
+	reset_control_assert(priv->rst);
+err_assert_power:
+	reset_control_assert(priv->pwr);
+
+	return ret;
+}
+
+static void st_ehci_platform_power_off(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct st_ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int clk;
+
+	reset_control_assert(priv->pwr);
+
+	reset_control_assert(priv->rst);
+
+	phy_power_off(priv->phy);
+
+	phy_exit(priv->phy);
+
+	for (clk = USB_MAX_CLKS - 1; clk >= 0; clk--)
+		if (priv->clks[clk])
+			clk_disable_unprepare(priv->clks[clk]);
+
+}
+
+static struct hc_driver __read_mostly ehci_platform_hc_driver;
+
+static const struct ehci_driver_overrides platform_overrides __initconst = {
+	.reset =		st_ehci_platform_reset,
+	.extra_priv_size =	sizeof(struct st_ehci_platform_priv),
+};
+
+static struct usb_ehci_pdata ehci_platform_defaults = {
+	.power_on =		st_ehci_platform_power_on,
+	.power_suspend =	st_ehci_platform_power_off,
+	.power_off =		st_ehci_platform_power_off,
+};
+
+static int st_ehci_platform_probe(struct platform_device *dev)
+{
+	struct usb_hcd *hcd;
+	struct resource *res_mem;
+	struct usb_ehci_pdata *pdata = &ehci_platform_defaults;
+	struct st_ehci_platform_priv *priv;
+	int err, irq, clk = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0)
+		return irq;
+	res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res_mem) {
+		dev_err(&dev->dev, "no memory resource provided");
+		return -ENXIO;
+	}
+
+	hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
+			     dev_name(&dev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	platform_set_drvdata(dev, hcd);
+	dev->dev.platform_data = pdata;
+	priv = hcd_to_ehci_priv(hcd);
+
+	priv->phy = devm_phy_get(&dev->dev, "usb");
+	if (IS_ERR(priv->phy)) {
+		err = PTR_ERR(priv->phy);
+		goto err_put_hcd;
+	}
+
+	for (clk = 0; clk < USB_MAX_CLKS; clk++) {
+		priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
+		if (IS_ERR(priv->clks[clk])) {
+			err = PTR_ERR(priv->clks[clk]);
+			if (err == -EPROBE_DEFER)
+				goto err_put_clks;
+			priv->clks[clk] = NULL;
+			break;
+		}
+	}
+
+	/* some SoCs don't have a dedicated 48Mhz clock, but those that
+	   do need the rate to be explicitly set */
+	priv->clk48 = devm_clk_get(&dev->dev, "clk48");
+	if (IS_ERR(priv->clk48)) {
+		dev_info(&dev->dev, "48MHz clk not found\n");
+		priv->clk48 = NULL;
+	}
+
+	priv->pwr =
+		devm_reset_control_get_optional_shared(&dev->dev, "power");
+	if (IS_ERR(priv->pwr)) {
+		err = PTR_ERR(priv->pwr);
+		if (err == -EPROBE_DEFER)
+			goto err_put_clks;
+		priv->pwr = NULL;
+	}
+
+	priv->rst =
+		devm_reset_control_get_optional_shared(&dev->dev, "softreset");
+	if (IS_ERR(priv->rst)) {
+		err = PTR_ERR(priv->rst);
+		if (err == -EPROBE_DEFER)
+			goto err_put_clks;
+		priv->rst = NULL;
+	}
+
+	if (pdata->power_on) {
+		err = pdata->power_on(dev);
+		if (err < 0)
+			goto err_put_clks;
+	}
+
+	hcd->rsrc_start = res_mem->start;
+	hcd->rsrc_len = resource_size(res_mem);
+
+	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
+	if (IS_ERR(hcd->regs)) {
+		err = PTR_ERR(hcd->regs);
+		goto err_put_clks;
+	}
+
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (err)
+		goto err_put_clks;
+
+	device_wakeup_enable(hcd->self.controller);
+	platform_set_drvdata(dev, hcd);
+
+	return err;
+
+err_put_clks:
+	while (--clk >= 0)
+		clk_put(priv->clks[clk]);
+err_put_hcd:
+	if (pdata == &ehci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	usb_put_hcd(hcd);
+
+	return err;
+}
+
+static int st_ehci_platform_remove(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
+	struct st_ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int clk;
+
+	usb_remove_hcd(hcd);
+
+	if (pdata->power_off)
+		pdata->power_off(dev);
+
+	for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++)
+		clk_put(priv->clks[clk]);
+
+	usb_put_hcd(hcd);
+
+	if (pdata == &ehci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int st_ehci_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct usb_ehci_pdata *pdata = dev_get_platdata(dev);
+	struct platform_device *pdev = to_platform_device(dev);
+	bool do_wakeup = device_may_wakeup(dev);
+	int ret;
+
+	ret = ehci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+
+	if (pdata->power_suspend)
+		pdata->power_suspend(pdev);
+
+	pinctrl_pm_select_sleep_state(dev);
+
+	return ret;
+}
+
+static int st_ehci_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct usb_ehci_pdata *pdata = dev_get_platdata(dev);
+	struct platform_device *pdev = to_platform_device(dev);
+	int err;
+
+	pinctrl_pm_select_default_state(dev);
+
+	if (pdata->power_on) {
+		err = pdata->power_on(pdev);
+		if (err < 0)
+			return err;
+	}
+
+	ehci_resume(hcd, false);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(st_ehci_pm_ops, st_ehci_suspend, st_ehci_resume);
+
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct of_device_id st_ehci_ids[] = {
+	{ .compatible = "st,st-ehci-300x", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, st_ehci_ids);
+
+static struct platform_driver ehci_platform_driver = {
+	.probe		= st_ehci_platform_probe,
+	.remove		= st_ehci_platform_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "st-ehci",
+#ifdef CONFIG_PM_SLEEP
+		.pm	= &st_ehci_pm_ops,
+#endif
+		.of_match_table = st_ehci_ids,
+	}
+};
+
+static int __init ehci_platform_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides);
+	return platform_driver_register(&ehci_platform_driver);
+}
+module_init(ehci_platform_init);
+
+static void __exit ehci_platform_cleanup(void)
+{
+	platform_driver_unregister(&ehci_platform_driver);
+}
+module_exit(ehci_platform_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci-sysfs.c b/drivers/usb/host/ehci-sysfs.c
new file mode 100644
index 000000000..8f75cb7b1
--- /dev/null
+++ b/drivers/usb/host/ehci-sysfs.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2007 by Alan Stern
+ */
+
+/* this file is part of ehci-hcd.c */
+
+
+/* Display the ports dedicated to the companion controller */
+static ssize_t companion_show(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	struct ehci_hcd		*ehci;
+	int			nports, index, n;
+	int			count = PAGE_SIZE;
+	char			*ptr = buf;
+
+	ehci = hcd_to_ehci(dev_get_drvdata(dev));
+	nports = HCS_N_PORTS(ehci->hcs_params);
+
+	for (index = 0; index < nports; ++index) {
+		if (test_bit(index, &ehci->companion_ports)) {
+			n = scnprintf(ptr, count, "%d\n", index + 1);
+			ptr += n;
+			count -= n;
+		}
+	}
+	return ptr - buf;
+}
+
+/*
+ * Dedicate or undedicate a port to the companion controller.
+ * Syntax is "[-]portnum", where a leading '-' sign means
+ * return control of the port to the EHCI controller.
+ */
+static ssize_t companion_store(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct ehci_hcd		*ehci;
+	int			portnum, new_owner;
+
+	ehci = hcd_to_ehci(dev_get_drvdata(dev));
+	new_owner = PORT_OWNER;		/* Owned by companion */
+	if (sscanf(buf, "%d", &portnum) != 1)
+		return -EINVAL;
+	if (portnum < 0) {
+		portnum = - portnum;
+		new_owner = 0;		/* Owned by EHCI */
+	}
+	if (portnum <= 0 || portnum > HCS_N_PORTS(ehci->hcs_params))
+		return -ENOENT;
+	portnum--;
+	if (new_owner)
+		set_bit(portnum, &ehci->companion_ports);
+	else
+		clear_bit(portnum, &ehci->companion_ports);
+	set_owner(ehci, portnum, new_owner);
+	return count;
+}
+static DEVICE_ATTR_RW(companion);
+
+
+/*
+ * Display / Set uframe_periodic_max
+ */
+static ssize_t uframe_periodic_max_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct ehci_hcd		*ehci;
+	int			n;
+
+	ehci = hcd_to_ehci(dev_get_drvdata(dev));
+	n = scnprintf(buf, PAGE_SIZE, "%d\n", ehci->uframe_periodic_max);
+	return n;
+}
+
+
+static ssize_t uframe_periodic_max_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct ehci_hcd		*ehci;
+	unsigned		uframe_periodic_max;
+	unsigned		uframe;
+	unsigned long		flags;
+	ssize_t			ret;
+
+	ehci = hcd_to_ehci(dev_get_drvdata(dev));
+	if (kstrtouint(buf, 0, &uframe_periodic_max) < 0)
+		return -EINVAL;
+
+	if (uframe_periodic_max < 100 || uframe_periodic_max >= 125) {
+		ehci_info(ehci, "rejecting invalid request for "
+				"uframe_periodic_max=%u\n", uframe_periodic_max);
+		return -EINVAL;
+	}
+
+	ret = -EINVAL;
+
+	/*
+	 * lock, so that our checking does not race with possible periodic
+	 * bandwidth allocation through submitting new urbs.
+	 */
+	spin_lock_irqsave (&ehci->lock, flags);
+
+	/*
+	 * for request to decrease max periodic bandwidth, we have to check
+	 * to see whether the decrease is possible.
+	 */
+	if (uframe_periodic_max < ehci->uframe_periodic_max) {
+		u8		allocated_max = 0;
+
+		for (uframe = 0; uframe < EHCI_BANDWIDTH_SIZE; ++uframe)
+			allocated_max = max(allocated_max,
+					ehci->bandwidth[uframe]);
+
+		if (allocated_max > uframe_periodic_max) {
+			ehci_info(ehci,
+				"cannot decrease uframe_periodic_max because "
+				"periodic bandwidth is already allocated "
+				"(%u > %u)\n",
+				allocated_max, uframe_periodic_max);
+			goto out_unlock;
+		}
+	}
+
+	/* increasing is always ok */
+
+	ehci_info(ehci, "setting max periodic bandwidth to %u%% "
+			"(== %u usec/uframe)\n",
+			100*uframe_periodic_max/125, uframe_periodic_max);
+
+	if (uframe_periodic_max != 100)
+		ehci_warn(ehci, "max periodic bandwidth set is non-standard\n");
+
+	ehci->uframe_periodic_max = uframe_periodic_max;
+	ret = count;
+
+out_unlock:
+	spin_unlock_irqrestore (&ehci->lock, flags);
+	return ret;
+}
+static DEVICE_ATTR_RW(uframe_periodic_max);
+
+
+static inline int create_sysfs_files(struct ehci_hcd *ehci)
+{
+	struct device	*controller = ehci_to_hcd(ehci)->self.controller;
+	int	i = 0;
+
+	/* with integrated TT there is no companion! */
+	if (!ehci_is_TDI(ehci))
+		i = device_create_file(controller, &dev_attr_companion);
+	if (i)
+		goto out;
+
+	i = device_create_file(controller, &dev_attr_uframe_periodic_max);
+out:
+	return i;
+}
+
+static inline void remove_sysfs_files(struct ehci_hcd *ehci)
+{
+	struct device	*controller = ehci_to_hcd(ehci)->self.controller;
+
+	/* with integrated TT there is no companion! */
+	if (!ehci_is_TDI(ehci))
+		device_remove_file(controller, &dev_attr_companion);
+
+	device_remove_file(controller, &dev_attr_uframe_periodic_max);
+}
diff --git a/drivers/usb/host/ehci-timer.c b/drivers/usb/host/ehci-timer.c
new file mode 100644
index 000000000..a79c8ac0a
--- /dev/null
+++ b/drivers/usb/host/ehci-timer.c
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 by Alan Stern
+ */
+
+/* This file is part of ehci-hcd.c */
+
+/*-------------------------------------------------------------------------*/
+
+/* Set a bit in the USBCMD register */
+static void ehci_set_command_bit(struct ehci_hcd *ehci, u32 bit)
+{
+	ehci->command |= bit;
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+
+	/* unblock posted write */
+	ehci_readl(ehci, &ehci->regs->command);
+}
+
+/* Clear a bit in the USBCMD register */
+static void ehci_clear_command_bit(struct ehci_hcd *ehci, u32 bit)
+{
+	ehci->command &= ~bit;
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+
+	/* unblock posted write */
+	ehci_readl(ehci, &ehci->regs->command);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI timer support...  Now using hrtimers.
+ *
+ * Lots of different events are triggered from ehci->hrtimer.  Whenever
+ * the timer routine runs, it checks each possible event; events that are
+ * currently enabled and whose expiration time has passed get handled.
+ * The set of enabled events is stored as a collection of bitflags in
+ * ehci->enabled_hrtimer_events, and they are numbered in order of
+ * increasing delay values (ranging between 1 ms and 100 ms).
+ *
+ * Rather than implementing a sorted list or tree of all pending events,
+ * we keep track only of the lowest-numbered pending event, in
+ * ehci->next_hrtimer_event.  Whenever ehci->hrtimer gets restarted, its
+ * expiration time is set to the timeout value for this event.
+ *
+ * As a result, events might not get handled right away; the actual delay
+ * could be anywhere up to twice the requested delay.  This doesn't
+ * matter, because none of the events are especially time-critical.  The
+ * ones that matter most all have a delay of 1 ms, so they will be
+ * handled after 2 ms at most, which is okay.  In addition to this, we
+ * allow for an expiration range of 1 ms.
+ */
+
+/*
+ * Delay lengths for the hrtimer event types.
+ * Keep this list sorted by delay length, in the same order as
+ * the event types indexed by enum ehci_hrtimer_event in ehci.h.
+ */
+static unsigned event_delays_ns[] = {
+	1 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_POLL_ASS */
+	1 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_POLL_PSS */
+	1 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_POLL_DEAD */
+	1125 * NSEC_PER_USEC,	/* EHCI_HRTIMER_UNLINK_INTR */
+	2 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_FREE_ITDS */
+	2 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_ACTIVE_UNLINK */
+	5 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_START_UNLINK_INTR */
+	6 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_ASYNC_UNLINKS */
+	10 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_IAA_WATCHDOG */
+	10 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_DISABLE_PERIODIC */
+	15 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_DISABLE_ASYNC */
+	100 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_IO_WATCHDOG */
+};
+
+/* Enable a pending hrtimer event */
+static void ehci_enable_event(struct ehci_hcd *ehci, unsigned event,
+		bool resched)
+{
+	ktime_t		*timeout = &ehci->hr_timeouts[event];
+
+	if (resched)
+		*timeout = ktime_add(ktime_get(), event_delays_ns[event]);
+	ehci->enabled_hrtimer_events |= (1 << event);
+
+	/* Track only the lowest-numbered pending event */
+	if (event < ehci->next_hrtimer_event) {
+		ehci->next_hrtimer_event = event;
+		hrtimer_start_range_ns(&ehci->hrtimer, *timeout,
+				NSEC_PER_MSEC, HRTIMER_MODE_ABS);
+	}
+}
+
+
+/* Poll the STS_ASS status bit; see when it agrees with CMD_ASE */
+static void ehci_poll_ASS(struct ehci_hcd *ehci)
+{
+	unsigned	actual, want;
+
+	/* Don't enable anything if the controller isn't running (e.g., died) */
+	if (ehci->rh_state != EHCI_RH_RUNNING)
+		return;
+
+	want = (ehci->command & CMD_ASE) ? STS_ASS : 0;
+	actual = ehci_readl(ehci, &ehci->regs->status) & STS_ASS;
+
+	if (want != actual) {
+
+		/* Poll again later, but give up after about 2-4 ms */
+		if (ehci->ASS_poll_count++ < 2) {
+			ehci_enable_event(ehci, EHCI_HRTIMER_POLL_ASS, true);
+			return;
+		}
+		ehci_dbg(ehci, "Waited too long for the async schedule status (%x/%x), giving up\n",
+				want, actual);
+	}
+	ehci->ASS_poll_count = 0;
+
+	/* The status is up-to-date; restart or stop the schedule as needed */
+	if (want == 0) {	/* Stopped */
+		if (ehci->async_count > 0)
+			ehci_set_command_bit(ehci, CMD_ASE);
+
+	} else {		/* Running */
+		if (ehci->async_count == 0) {
+
+			/* Turn off the schedule after a while */
+			ehci_enable_event(ehci, EHCI_HRTIMER_DISABLE_ASYNC,
+					true);
+		}
+	}
+}
+
+/* Turn off the async schedule after a brief delay */
+static void ehci_disable_ASE(struct ehci_hcd *ehci)
+{
+	ehci_clear_command_bit(ehci, CMD_ASE);
+}
+
+
+/* Poll the STS_PSS status bit; see when it agrees with CMD_PSE */
+static void ehci_poll_PSS(struct ehci_hcd *ehci)
+{
+	unsigned	actual, want;
+
+	/* Don't do anything if the controller isn't running (e.g., died) */
+	if (ehci->rh_state != EHCI_RH_RUNNING)
+		return;
+
+	want = (ehci->command & CMD_PSE) ? STS_PSS : 0;
+	actual = ehci_readl(ehci, &ehci->regs->status) & STS_PSS;
+
+	if (want != actual) {
+
+		/* Poll again later, but give up after about 2-4 ms */
+		if (ehci->PSS_poll_count++ < 2) {
+			ehci_enable_event(ehci, EHCI_HRTIMER_POLL_PSS, true);
+			return;
+		}
+		ehci_dbg(ehci, "Waited too long for the periodic schedule status (%x/%x), giving up\n",
+				want, actual);
+	}
+	ehci->PSS_poll_count = 0;
+
+	/* The status is up-to-date; restart or stop the schedule as needed */
+	if (want == 0) {	/* Stopped */
+		if (ehci->periodic_count > 0)
+			ehci_set_command_bit(ehci, CMD_PSE);
+
+	} else {		/* Running */
+		if (ehci->periodic_count == 0) {
+
+			/* Turn off the schedule after a while */
+			ehci_enable_event(ehci, EHCI_HRTIMER_DISABLE_PERIODIC,
+					true);
+		}
+	}
+}
+
+/* Turn off the periodic schedule after a brief delay */
+static void ehci_disable_PSE(struct ehci_hcd *ehci)
+{
+	ehci_clear_command_bit(ehci, CMD_PSE);
+}
+
+
+/* Poll the STS_HALT status bit; see when a dead controller stops */
+static void ehci_handle_controller_death(struct ehci_hcd *ehci)
+{
+	if (!(ehci_readl(ehci, &ehci->regs->status) & STS_HALT)) {
+
+		/* Give up after a few milliseconds */
+		if (ehci->died_poll_count++ < 5) {
+			/* Try again later */
+			ehci_enable_event(ehci, EHCI_HRTIMER_POLL_DEAD, true);
+			return;
+		}
+		ehci_warn(ehci, "Waited too long for the controller to stop, giving up\n");
+	}
+
+	/* Clean up the mess */
+	ehci->rh_state = EHCI_RH_HALTED;
+	ehci_writel(ehci, 0, &ehci->regs->configured_flag);
+	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+	ehci_work(ehci);
+	end_unlink_async(ehci);
+
+	/* Not in process context, so don't try to reset the controller */
+}
+
+/* start to unlink interrupt QHs  */
+static void ehci_handle_start_intr_unlinks(struct ehci_hcd *ehci)
+{
+	bool		stopped = (ehci->rh_state < EHCI_RH_RUNNING);
+
+	/*
+	 * Process all the QHs on the intr_unlink list that were added
+	 * before the current unlink cycle began.  The list is in
+	 * temporal order, so stop when we reach the first entry in the
+	 * current cycle.  But if the root hub isn't running then
+	 * process all the QHs on the list.
+	 */
+	while (!list_empty(&ehci->intr_unlink_wait)) {
+		struct ehci_qh	*qh;
+
+		qh = list_first_entry(&ehci->intr_unlink_wait,
+				struct ehci_qh, unlink_node);
+		if (!stopped && (qh->unlink_cycle ==
+				ehci->intr_unlink_wait_cycle))
+			break;
+		list_del_init(&qh->unlink_node);
+		qh->unlink_reason |= QH_UNLINK_QUEUE_EMPTY;
+		start_unlink_intr(ehci, qh);
+	}
+
+	/* Handle remaining entries later */
+	if (!list_empty(&ehci->intr_unlink_wait)) {
+		ehci_enable_event(ehci, EHCI_HRTIMER_START_UNLINK_INTR, true);
+		++ehci->intr_unlink_wait_cycle;
+	}
+}
+
+/* Handle unlinked interrupt QHs once they are gone from the hardware */
+static void ehci_handle_intr_unlinks(struct ehci_hcd *ehci)
+{
+	bool		stopped = (ehci->rh_state < EHCI_RH_RUNNING);
+
+	/*
+	 * Process all the QHs on the intr_unlink list that were added
+	 * before the current unlink cycle began.  The list is in
+	 * temporal order, so stop when we reach the first entry in the
+	 * current cycle.  But if the root hub isn't running then
+	 * process all the QHs on the list.
+	 */
+	ehci->intr_unlinking = true;
+	while (!list_empty(&ehci->intr_unlink)) {
+		struct ehci_qh	*qh;
+
+		qh = list_first_entry(&ehci->intr_unlink, struct ehci_qh,
+				unlink_node);
+		if (!stopped && qh->unlink_cycle == ehci->intr_unlink_cycle)
+			break;
+		list_del_init(&qh->unlink_node);
+		end_unlink_intr(ehci, qh);
+	}
+
+	/* Handle remaining entries later */
+	if (!list_empty(&ehci->intr_unlink)) {
+		ehci_enable_event(ehci, EHCI_HRTIMER_UNLINK_INTR, true);
+		++ehci->intr_unlink_cycle;
+	}
+	ehci->intr_unlinking = false;
+}
+
+
+/* Start another free-iTDs/siTDs cycle */
+static void start_free_itds(struct ehci_hcd *ehci)
+{
+	if (!(ehci->enabled_hrtimer_events & BIT(EHCI_HRTIMER_FREE_ITDS))) {
+		ehci->last_itd_to_free = list_entry(
+				ehci->cached_itd_list.prev,
+				struct ehci_itd, itd_list);
+		ehci->last_sitd_to_free = list_entry(
+				ehci->cached_sitd_list.prev,
+				struct ehci_sitd, sitd_list);
+		ehci_enable_event(ehci, EHCI_HRTIMER_FREE_ITDS, true);
+	}
+}
+
+/* Wait for controller to stop using old iTDs and siTDs */
+static void end_free_itds(struct ehci_hcd *ehci)
+{
+	struct ehci_itd		*itd, *n;
+	struct ehci_sitd	*sitd, *sn;
+
+	if (ehci->rh_state < EHCI_RH_RUNNING) {
+		ehci->last_itd_to_free = NULL;
+		ehci->last_sitd_to_free = NULL;
+	}
+
+	list_for_each_entry_safe(itd, n, &ehci->cached_itd_list, itd_list) {
+		list_del(&itd->itd_list);
+		dma_pool_free(ehci->itd_pool, itd, itd->itd_dma);
+		if (itd == ehci->last_itd_to_free)
+			break;
+	}
+	list_for_each_entry_safe(sitd, sn, &ehci->cached_sitd_list, sitd_list) {
+		list_del(&sitd->sitd_list);
+		dma_pool_free(ehci->sitd_pool, sitd, sitd->sitd_dma);
+		if (sitd == ehci->last_sitd_to_free)
+			break;
+	}
+
+	if (!list_empty(&ehci->cached_itd_list) ||
+			!list_empty(&ehci->cached_sitd_list))
+		start_free_itds(ehci);
+}
+
+
+/* Handle lost (or very late) IAA interrupts */
+static void ehci_iaa_watchdog(struct ehci_hcd *ehci)
+{
+	u32 cmd, status;
+
+	/*
+	 * Lost IAA irqs wedge things badly; seen first with a vt8235.
+	 * So we need this watchdog, but must protect it against both
+	 * (a) SMP races against real IAA firing and retriggering, and
+	 * (b) clean HC shutdown, when IAA watchdog was pending.
+	 */
+	if (!ehci->iaa_in_progress || ehci->rh_state != EHCI_RH_RUNNING)
+		return;
+
+	/* If we get here, IAA is *REALLY* late.  It's barely
+	 * conceivable that the system is so busy that CMD_IAAD
+	 * is still legitimately set, so let's be sure it's
+	 * clear before we read STS_IAA.  (The HC should clear
+	 * CMD_IAAD when it sets STS_IAA.)
+	 */
+	cmd = ehci_readl(ehci, &ehci->regs->command);
+
+	/*
+	 * If IAA is set here it either legitimately triggered
+	 * after the watchdog timer expired (_way_ late, so we'll
+	 * still count it as lost) ... or a silicon erratum:
+	 * - VIA seems to set IAA without triggering the IRQ;
+	 * - IAAD potentially cleared without setting IAA.
+	 */
+	status = ehci_readl(ehci, &ehci->regs->status);
+	if ((status & STS_IAA) || !(cmd & CMD_IAAD)) {
+		INCR(ehci->stats.lost_iaa);
+		ehci_writel(ehci, STS_IAA, &ehci->regs->status);
+	}
+
+	ehci_dbg(ehci, "IAA watchdog: status %x cmd %x\n", status, cmd);
+	end_iaa_cycle(ehci);
+}
+
+
+/* Enable the I/O watchdog, if appropriate */
+static void turn_on_io_watchdog(struct ehci_hcd *ehci)
+{
+	/* Not needed if the controller isn't running or it's already enabled */
+	if (ehci->rh_state != EHCI_RH_RUNNING ||
+			(ehci->enabled_hrtimer_events &
+				BIT(EHCI_HRTIMER_IO_WATCHDOG)))
+		return;
+
+	/*
+	 * Isochronous transfers always need the watchdog.
+	 * For other sorts we use it only if the flag is set.
+	 */
+	if (ehci->isoc_count > 0 || (ehci->need_io_watchdog &&
+			ehci->async_count + ehci->intr_count > 0))
+		ehci_enable_event(ehci, EHCI_HRTIMER_IO_WATCHDOG, true);
+}
+
+
+/*
+ * Handler functions for the hrtimer event types.
+ * Keep this array in the same order as the event types indexed by
+ * enum ehci_hrtimer_event in ehci.h.
+ */
+static void (*event_handlers[])(struct ehci_hcd *) = {
+	ehci_poll_ASS,			/* EHCI_HRTIMER_POLL_ASS */
+	ehci_poll_PSS,			/* EHCI_HRTIMER_POLL_PSS */
+	ehci_handle_controller_death,	/* EHCI_HRTIMER_POLL_DEAD */
+	ehci_handle_intr_unlinks,	/* EHCI_HRTIMER_UNLINK_INTR */
+	end_free_itds,			/* EHCI_HRTIMER_FREE_ITDS */
+	end_unlink_async,		/* EHCI_HRTIMER_ACTIVE_UNLINK */
+	ehci_handle_start_intr_unlinks,	/* EHCI_HRTIMER_START_UNLINK_INTR */
+	unlink_empty_async,		/* EHCI_HRTIMER_ASYNC_UNLINKS */
+	ehci_iaa_watchdog,		/* EHCI_HRTIMER_IAA_WATCHDOG */
+	ehci_disable_PSE,		/* EHCI_HRTIMER_DISABLE_PERIODIC */
+	ehci_disable_ASE,		/* EHCI_HRTIMER_DISABLE_ASYNC */
+	ehci_work,			/* EHCI_HRTIMER_IO_WATCHDOG */
+};
+
+static enum hrtimer_restart ehci_hrtimer_func(struct hrtimer *t)
+{
+	struct ehci_hcd	*ehci = container_of(t, struct ehci_hcd, hrtimer);
+	ktime_t		now;
+	unsigned long	events;
+	unsigned long	flags;
+	unsigned	e;
+
+	spin_lock_irqsave(&ehci->lock, flags);
+
+	events = ehci->enabled_hrtimer_events;
+	ehci->enabled_hrtimer_events = 0;
+	ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT;
+
+	/*
+	 * Check each pending event.  If its time has expired, handle
+	 * the event; otherwise re-enable it.
+	 */
+	now = ktime_get();
+	for_each_set_bit(e, &events, EHCI_HRTIMER_NUM_EVENTS) {
+		if (ktime_compare(now, ehci->hr_timeouts[e]) >= 0)
+			event_handlers[e](ehci);
+		else
+			ehci_enable_event(ehci, e, false);
+	}
+
+	spin_unlock_irqrestore(&ehci->lock, flags);
+	return HRTIMER_NORESTART;
+}
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
new file mode 100644
index 000000000..3d7893747
--- /dev/null
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * EHCI HCD (Host Controller Driver) for USB.
+ *
+ * Bus Glue for Xilinx EHCI core on the of_platform bus
+ *
+ * Copyright (c) 2009 Xilinx, Inc.
+ *
+ * Based on "ehci-ppc-of.c" by Valentine Barshak <vbarshak@ru.mvista.com>
+ * and "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de>
+ * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com>
+ */
+
+#include <linux/err.h>
+#include <linux/signal.h>
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+/**
+ * ehci_xilinx_port_handed_over - hand the port out if failed to enable it
+ * @hcd:	Pointer to the usb_hcd device to which the host controller bound
+ * @portnum:Port number to which the device is attached.
+ *
+ * This function is used as a place to tell the user that the Xilinx USB host
+ * controller does support LS devices. And in an HS only configuration, it
+ * does not support FS devices either. It is hoped that this can help a
+ * confused user.
+ *
+ * There are cases when the host controller fails to enable the port due to,
+ * for example, insufficient power that can be supplied to the device from
+ * the USB bus. In those cases, the messages printed here are not helpful.
+ *
+ * Return: Always return 0
+ */
+static int ehci_xilinx_port_handed_over(struct usb_hcd *hcd, int portnum)
+{
+	dev_warn(hcd->self.controller, "port %d cannot be enabled\n", portnum);
+	if (hcd->has_tt) {
+		dev_warn(hcd->self.controller,
+			"Maybe you have connected a low speed device?\n");
+
+		dev_warn(hcd->self.controller,
+			"We do not support low speed devices\n");
+	} else {
+		dev_warn(hcd->self.controller,
+			"Maybe your device is not a high speed device?\n");
+		dev_warn(hcd->self.controller,
+			"The USB host controller does not support full speed nor low speed devices\n");
+		dev_warn(hcd->self.controller,
+			"You can reconfigure the host controller to have full speed support\n");
+	}
+
+	return 0;
+}
+
+
+static const struct hc_driver ehci_xilinx_of_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "OF EHCI",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset			= ehci_setup,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+#endif
+	.relinquish_port	= NULL,
+	.port_handed_over	= ehci_xilinx_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+/**
+ * ehci_hcd_xilinx_of_probe - Probe method for the USB host controller
+ * @op:		pointer to the platform_device bound to the host controller
+ *
+ * This function requests resources and sets up appropriate properties for the
+ * host controller. Because the Xilinx USB host controller can be configured
+ * as HS only or HS/FS only, it checks the configuration in the device tree
+ * entry, and sets an appropriate value for hcd->has_tt.
+ *
+ * Return: zero on success, negative error code otherwise
+ */
+static int ehci_hcd_xilinx_of_probe(struct platform_device *op)
+{
+	struct device_node *dn = op->dev.of_node;
+	struct usb_hcd *hcd;
+	struct ehci_hcd	*ehci;
+	struct resource res;
+	int irq;
+	int rv;
+	int *value;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	dev_dbg(&op->dev, "initializing XILINX-OF USB Controller\n");
+
+	rv = of_address_to_resource(dn, 0, &res);
+	if (rv)
+		return rv;
+
+	hcd = usb_create_hcd(&ehci_xilinx_of_hc_driver, &op->dev,
+				"XILINX-OF USB");
+	if (!hcd)
+		return -ENOMEM;
+
+	hcd->rsrc_start = res.start;
+	hcd->rsrc_len = resource_size(&res);
+
+	irq = irq_of_parse_and_map(dn, 0);
+	if (!irq) {
+		dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n",
+			__FILE__);
+		rv = -EBUSY;
+		goto err_irq;
+	}
+
+	hcd->regs = devm_ioremap_resource(&op->dev, &res);
+	if (IS_ERR(hcd->regs)) {
+		rv = PTR_ERR(hcd->regs);
+		goto err_irq;
+	}
+
+	ehci = hcd_to_ehci(hcd);
+
+	/* This core always has big-endian register interface and uses
+	 * big-endian memory descriptors.
+	 */
+	ehci->big_endian_mmio = 1;
+	ehci->big_endian_desc = 1;
+
+	/* Check whether the FS support option is selected in the hardware.
+	 */
+	value = (int *)of_get_property(dn, "xlnx,support-usb-fs", NULL);
+	if (value && (*value == 1)) {
+		ehci_dbg(ehci, "USB host controller supports FS devices\n");
+		hcd->has_tt = 1;
+	} else {
+		ehci_dbg(ehci,
+			"USB host controller is HS only\n");
+		hcd->has_tt = 0;
+	}
+
+	/* Debug registers are at the first 0x100 region
+	 */
+	ehci->caps = hcd->regs + 0x100;
+
+	rv = usb_add_hcd(hcd, irq, 0);
+	if (rv == 0) {
+		device_wakeup_enable(hcd->self.controller);
+		return 0;
+	}
+
+err_irq:
+	usb_put_hcd(hcd);
+
+	return rv;
+}
+
+/**
+ * ehci_hcd_xilinx_of_remove - shutdown hcd and release resources
+ * @op:		pointer to platform_device structure that is to be removed
+ *
+ * Remove the hcd structure, and release resources that has been requested
+ * during probe.
+ *
+ * Return: Always return 0
+ */
+static int ehci_hcd_xilinx_of_remove(struct platform_device *op)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(op);
+
+	dev_dbg(&op->dev, "stopping XILINX-OF USB Controller\n");
+
+	usb_remove_hcd(hcd);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+static const struct of_device_id ehci_hcd_xilinx_of_match[] = {
+		{.compatible = "xlnx,xps-usb-host-1.00.a",},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ehci_hcd_xilinx_of_match);
+
+static struct platform_driver ehci_hcd_xilinx_of_driver = {
+	.probe		= ehci_hcd_xilinx_of_probe,
+	.remove		= ehci_hcd_xilinx_of_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver = {
+		.name = "xilinx-of-ehci",
+		.of_match_table = ehci_hcd_xilinx_of_match,
+	},
+};
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
new file mode 100644
index 000000000..5c0e25742
--- /dev/null
+++ b/drivers/usb/host/ehci.h
@@ -0,0 +1,907 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ */
+
+#ifndef __LINUX_EHCI_HCD_H
+#define __LINUX_EHCI_HCD_H
+
+/* definitions used for the EHCI driver */
+
+/*
+ * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
+ * __leXX (normally) or __beXX (given EHCI_BIG_ENDIAN_DESC), depending on
+ * the host controller implementation.
+ *
+ * To facilitate the strongest possible byte-order checking from "sparse"
+ * and so on, we use __leXX unless that's not practical.
+ */
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
+typedef __u32 __bitwise __hc32;
+typedef __u16 __bitwise __hc16;
+#else
+#define __hc32	__le32
+#define __hc16	__le16
+#endif
+
+/* statistics can be kept for tuning/monitoring */
+#ifdef CONFIG_DYNAMIC_DEBUG
+#define EHCI_STATS
+#endif
+
+struct ehci_stats {
+	/* irq usage */
+	unsigned long		normal;
+	unsigned long		error;
+	unsigned long		iaa;
+	unsigned long		lost_iaa;
+
+	/* termination of urbs from core */
+	unsigned long		complete;
+	unsigned long		unlink;
+};
+
+/*
+ * Scheduling and budgeting information for periodic transfers, for both
+ * high-speed devices and full/low-speed devices lying behind a TT.
+ */
+struct ehci_per_sched {
+	struct usb_device	*udev;		/* access to the TT */
+	struct usb_host_endpoint *ep;
+	struct list_head	ps_list;	/* node on ehci_tt's ps_list */
+	u16			tt_usecs;	/* time on the FS/LS bus */
+	u16			cs_mask;	/* C-mask and S-mask bytes */
+	u16			period;		/* actual period in frames */
+	u16			phase;		/* actual phase, frame part */
+	u8			bw_phase;	/* same, for bandwidth
+						   reservation */
+	u8			phase_uf;	/* uframe part of the phase */
+	u8			usecs, c_usecs;	/* times on the HS bus */
+	u8			bw_uperiod;	/* period in microframes, for
+						   bandwidth reservation */
+	u8			bw_period;	/* same, in frames */
+};
+#define NO_FRAME	29999			/* frame not assigned yet */
+
+/* ehci_hcd->lock guards shared data against other CPUs:
+ *   ehci_hcd:	async, unlink, periodic (and shadow), ...
+ *   usb_host_endpoint: hcpriv
+ *   ehci_qh:	qh_next, qtd_list
+ *   ehci_qtd:	qtd_list
+ *
+ * Also, hold this lock when talking to HC registers or
+ * when updating hw_* fields in shared qh/qtd/... structures.
+ */
+
+#define	EHCI_MAX_ROOT_PORTS	15		/* see HCS_N_PORTS */
+
+/*
+ * ehci_rh_state values of EHCI_RH_RUNNING or above mean that the
+ * controller may be doing DMA.  Lower values mean there's no DMA.
+ */
+enum ehci_rh_state {
+	EHCI_RH_HALTED,
+	EHCI_RH_SUSPENDED,
+	EHCI_RH_RUNNING,
+	EHCI_RH_STOPPING
+};
+
+/*
+ * Timer events, ordered by increasing delay length.
+ * Always update event_delays_ns[] and event_handlers[] (defined in
+ * ehci-timer.c) in parallel with this list.
+ */
+enum ehci_hrtimer_event {
+	EHCI_HRTIMER_POLL_ASS,		/* Poll for async schedule off */
+	EHCI_HRTIMER_POLL_PSS,		/* Poll for periodic schedule off */
+	EHCI_HRTIMER_POLL_DEAD,		/* Wait for dead controller to stop */
+	EHCI_HRTIMER_UNLINK_INTR,	/* Wait for interrupt QH unlink */
+	EHCI_HRTIMER_FREE_ITDS,		/* Wait for unused iTDs and siTDs */
+	EHCI_HRTIMER_ACTIVE_UNLINK,	/* Wait while unlinking an active QH */
+	EHCI_HRTIMER_START_UNLINK_INTR, /* Unlink empty interrupt QHs */
+	EHCI_HRTIMER_ASYNC_UNLINKS,	/* Unlink empty async QHs */
+	EHCI_HRTIMER_IAA_WATCHDOG,	/* Handle lost IAA interrupts */
+	EHCI_HRTIMER_DISABLE_PERIODIC,	/* Wait to disable periodic sched */
+	EHCI_HRTIMER_DISABLE_ASYNC,	/* Wait to disable async sched */
+	EHCI_HRTIMER_IO_WATCHDOG,	/* Check for missing IRQs */
+	EHCI_HRTIMER_NUM_EVENTS		/* Must come last */
+};
+#define EHCI_HRTIMER_NO_EVENT	99
+
+struct ehci_hcd {			/* one per controller */
+	/* timing support */
+	enum ehci_hrtimer_event	next_hrtimer_event;
+	unsigned		enabled_hrtimer_events;
+	ktime_t			hr_timeouts[EHCI_HRTIMER_NUM_EVENTS];
+	struct hrtimer		hrtimer;
+
+	int			PSS_poll_count;
+	int			ASS_poll_count;
+	int			died_poll_count;
+
+	/* glue to PCI and HCD framework */
+	struct ehci_caps __iomem *caps;
+	struct ehci_regs __iomem *regs;
+	struct ehci_dbg_port __iomem *debug;
+
+	__u32			hcs_params;	/* cached register copy */
+	spinlock_t		lock;
+	enum ehci_rh_state	rh_state;
+
+	/* general schedule support */
+	bool			scanning:1;
+	bool			need_rescan:1;
+	bool			intr_unlinking:1;
+	bool			iaa_in_progress:1;
+	bool			async_unlinking:1;
+	bool			shutdown:1;
+	struct ehci_qh		*qh_scan_next;
+
+	/* async schedule support */
+	struct ehci_qh		*async;
+	struct ehci_qh		*dummy;		/* For AMD quirk use */
+	struct list_head	async_unlink;
+	struct list_head	async_idle;
+	unsigned		async_unlink_cycle;
+	unsigned		async_count;	/* async activity count */
+	__hc32			old_current;	/* Test for QH becoming */
+	__hc32			old_token;	/*  inactive during unlink */
+
+	/* periodic schedule support */
+#define	DEFAULT_I_TDPS		1024		/* some HCs can do less */
+	unsigned		periodic_size;
+	__hc32			*periodic;	/* hw periodic table */
+	dma_addr_t		periodic_dma;
+	struct list_head	intr_qh_list;
+	unsigned		i_thresh;	/* uframes HC might cache */
+
+	union ehci_shadow	*pshadow;	/* mirror hw periodic table */
+	struct list_head	intr_unlink_wait;
+	struct list_head	intr_unlink;
+	unsigned		intr_unlink_wait_cycle;
+	unsigned		intr_unlink_cycle;
+	unsigned		now_frame;	/* frame from HC hardware */
+	unsigned		last_iso_frame;	/* last frame scanned for iso */
+	unsigned		intr_count;	/* intr activity count */
+	unsigned		isoc_count;	/* isoc activity count */
+	unsigned		periodic_count;	/* periodic activity count */
+	unsigned		uframe_periodic_max; /* max periodic time per uframe */
+
+
+	/* list of itds & sitds completed while now_frame was still active */
+	struct list_head	cached_itd_list;
+	struct ehci_itd		*last_itd_to_free;
+	struct list_head	cached_sitd_list;
+	struct ehci_sitd	*last_sitd_to_free;
+
+	/* per root hub port */
+	unsigned long		reset_done[EHCI_MAX_ROOT_PORTS];
+
+	/* bit vectors (one bit per port) */
+	unsigned long		bus_suspended;		/* which ports were
+			already suspended at the start of a bus suspend */
+	unsigned long		companion_ports;	/* which ports are
+			dedicated to the companion controller */
+	unsigned long		owned_ports;		/* which ports are
+			owned by the companion during a bus suspend */
+	unsigned long		port_c_suspend;		/* which ports have
+			the change-suspend feature turned on */
+	unsigned long		suspended_ports;	/* which ports are
+			suspended */
+	unsigned long		resuming_ports;		/* which ports have
+			started to resume */
+
+	/* per-HC memory pools (could be per-bus, but ...) */
+	struct dma_pool		*qh_pool;	/* qh per active urb */
+	struct dma_pool		*qtd_pool;	/* one or more per qh */
+	struct dma_pool		*itd_pool;	/* itd per iso urb */
+	struct dma_pool		*sitd_pool;	/* sitd per split iso urb */
+
+	unsigned		random_frame;
+	unsigned long		next_statechange;
+	ktime_t			last_periodic_enable;
+	u32			command;
+
+	/* SILICON QUIRKS */
+	unsigned		no_selective_suspend:1;
+	unsigned		has_fsl_port_bug:1; /* FreeScale */
+	unsigned		has_fsl_hs_errata:1;	/* Freescale HS quirk */
+	unsigned		has_fsl_susp_errata:1;	/* NXP SUSP quirk */
+	unsigned		has_ci_pec_bug:1;	/* ChipIdea PEC bug */
+	unsigned		big_endian_mmio:1;
+	unsigned		big_endian_desc:1;
+	unsigned		big_endian_capbase:1;
+	unsigned		has_amcc_usb23:1;
+	unsigned		need_io_watchdog:1;
+	unsigned		amd_pll_fix:1;
+	unsigned		use_dummy_qh:1;	/* AMD Frame List table quirk*/
+	unsigned		has_synopsys_hc_bug:1; /* Synopsys HC */
+	unsigned		frame_index_bug:1; /* MosChip (AKA NetMos) */
+	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
+	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
+	unsigned		spurious_oc:1;
+	unsigned		is_aspeed:1;
+	unsigned		zx_wakeup_clear_needed:1;
+
+	/* required for usb32 quirk */
+	#define OHCI_CTRL_HCFS          (3 << 6)
+	#define OHCI_USB_OPER           (2 << 6)
+	#define OHCI_USB_SUSPEND        (3 << 6)
+
+	#define OHCI_HCCTRL_OFFSET      0x4
+	#define OHCI_HCCTRL_LEN         0x4
+	__hc32			*ohci_hcctrl_reg;
+	unsigned		has_hostpc:1;
+	unsigned		has_tdi_phy_lpm:1;
+	unsigned		has_ppcd:1; /* support per-port change bits */
+	u8			sbrn;		/* packed release number */
+
+	/* irq statistics */
+#ifdef EHCI_STATS
+	struct ehci_stats	stats;
+#	define INCR(x) ((x)++)
+#else
+#	define INCR(x) do {} while (0)
+#endif
+
+	/* debug files */
+#ifdef CONFIG_DYNAMIC_DEBUG
+	struct dentry		*debug_dir;
+#endif
+
+	/* bandwidth usage */
+#define EHCI_BANDWIDTH_SIZE	64
+#define EHCI_BANDWIDTH_FRAMES	(EHCI_BANDWIDTH_SIZE >> 3)
+	u8			bandwidth[EHCI_BANDWIDTH_SIZE];
+						/* us allocated per uframe */
+	u8			tt_budget[EHCI_BANDWIDTH_SIZE];
+						/* us budgeted per uframe */
+	struct list_head	tt_list;
+
+	/* platform-specific data -- must come last */
+	unsigned long		priv[] __aligned(sizeof(s64));
+};
+
+/* convert between an HCD pointer and the corresponding EHCI_HCD */
+static inline struct ehci_hcd *hcd_to_ehci(struct usb_hcd *hcd)
+{
+	return (struct ehci_hcd *) (hcd->hcd_priv);
+}
+static inline struct usb_hcd *ehci_to_hcd(struct ehci_hcd *ehci)
+{
+	return container_of((void *) ehci, struct usb_hcd, hcd_priv);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#include <linux/usb/ehci_def.h>
+
+/*-------------------------------------------------------------------------*/
+
+#define	QTD_NEXT(ehci, dma)	cpu_to_hc32(ehci, (u32)dma)
+
+/*
+ * EHCI Specification 0.95 Section 3.5
+ * QTD: describe data transfer components (buffer, direction, ...)
+ * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
+ *
+ * These are associated only with "QH" (Queue Head) structures,
+ * used with control, bulk, and interrupt transfers.
+ */
+struct ehci_qtd {
+	/* first part defined by EHCI spec */
+	__hc32			hw_next;	/* see EHCI 3.5.1 */
+	__hc32			hw_alt_next;    /* see EHCI 3.5.2 */
+	__hc32			hw_token;       /* see EHCI 3.5.3 */
+#define	QTD_TOGGLE	(1 << 31)	/* data toggle */
+#define	QTD_LENGTH(tok)	(((tok)>>16) & 0x7fff)
+#define	QTD_IOC		(1 << 15)	/* interrupt on complete */
+#define	QTD_CERR(tok)	(((tok)>>10) & 0x3)
+#define	QTD_PID(tok)	(((tok)>>8) & 0x3)
+#define	QTD_STS_ACTIVE	(1 << 7)	/* HC may execute this */
+#define	QTD_STS_HALT	(1 << 6)	/* halted on error */
+#define	QTD_STS_DBE	(1 << 5)	/* data buffer error (in HC) */
+#define	QTD_STS_BABBLE	(1 << 4)	/* device was babbling (qtd halted) */
+#define	QTD_STS_XACT	(1 << 3)	/* device gave illegal response */
+#define	QTD_STS_MMF	(1 << 2)	/* incomplete split transaction */
+#define	QTD_STS_STS	(1 << 1)	/* split transaction state */
+#define	QTD_STS_PING	(1 << 0)	/* issue PING? */
+
+#define ACTIVE_BIT(ehci)	cpu_to_hc32(ehci, QTD_STS_ACTIVE)
+#define HALT_BIT(ehci)		cpu_to_hc32(ehci, QTD_STS_HALT)
+#define STATUS_BIT(ehci)	cpu_to_hc32(ehci, QTD_STS_STS)
+
+	__hc32			hw_buf[5];        /* see EHCI 3.5.4 */
+	__hc32			hw_buf_hi[5];        /* Appendix B */
+
+	/* the rest is HCD-private */
+	dma_addr_t		qtd_dma;		/* qtd address */
+	struct list_head	qtd_list;		/* sw qtd list */
+	struct urb		*urb;			/* qtd's urb */
+	size_t			length;			/* length of buffer */
+} __aligned(32);
+
+/* mask NakCnt+T in qh->hw_alt_next */
+#define QTD_MASK(ehci)	cpu_to_hc32(ehci, ~0x1f)
+
+#define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)
+
+/*-------------------------------------------------------------------------*/
+
+/* type tag from {qh,itd,sitd,fstn}->hw_next */
+#define Q_NEXT_TYPE(ehci, dma)	((dma) & cpu_to_hc32(ehci, 3 << 1))
+
+/*
+ * Now the following defines are not converted using the
+ * cpu_to_le32() macro anymore, since we have to support
+ * "dynamic" switching between be and le support, so that the driver
+ * can be used on one system with SoC EHCI controller using big-endian
+ * descriptors as well as a normal little-endian PCI EHCI controller.
+ */
+/* values for that type tag */
+#define Q_TYPE_ITD	(0 << 1)
+#define Q_TYPE_QH	(1 << 1)
+#define Q_TYPE_SITD	(2 << 1)
+#define Q_TYPE_FSTN	(3 << 1)
+
+/* next async queue entry, or pointer to interrupt/periodic QH */
+#define QH_NEXT(ehci, dma) \
+		(cpu_to_hc32(ehci, (((u32) dma) & ~0x01f) | Q_TYPE_QH))
+
+/* for periodic/async schedules and qtd lists, mark end of list */
+#define EHCI_LIST_END(ehci)	cpu_to_hc32(ehci, 1) /* "null pointer" to hw */
+
+/*
+ * Entries in periodic shadow table are pointers to one of four kinds
+ * of data structure.  That's dictated by the hardware; a type tag is
+ * encoded in the low bits of the hardware's periodic schedule.  Use
+ * Q_NEXT_TYPE to get the tag.
+ *
+ * For entries in the async schedule, the type tag always says "qh".
+ */
+union ehci_shadow {
+	struct ehci_qh		*qh;		/* Q_TYPE_QH */
+	struct ehci_itd		*itd;		/* Q_TYPE_ITD */
+	struct ehci_sitd	*sitd;		/* Q_TYPE_SITD */
+	struct ehci_fstn	*fstn;		/* Q_TYPE_FSTN */
+	__hc32			*hw_next;	/* (all types) */
+	void			*ptr;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.95 Section 3.6
+ * QH: describes control/bulk/interrupt endpoints
+ * See Fig 3-7 "Queue Head Structure Layout".
+ *
+ * These appear in both the async and (for interrupt) periodic schedules.
+ */
+
+/* first part defined by EHCI spec */
+struct ehci_qh_hw {
+	__hc32			hw_next;	/* see EHCI 3.6.1 */
+	__hc32			hw_info1;       /* see EHCI 3.6.2 */
+#define	QH_CONTROL_EP	(1 << 27)	/* FS/LS control endpoint */
+#define	QH_HEAD		(1 << 15)	/* Head of async reclamation list */
+#define	QH_TOGGLE_CTL	(1 << 14)	/* Data toggle control */
+#define	QH_HIGH_SPEED	(2 << 12)	/* Endpoint speed */
+#define	QH_LOW_SPEED	(1 << 12)
+#define	QH_FULL_SPEED	(0 << 12)
+#define	QH_INACTIVATE	(1 << 7)	/* Inactivate on next transaction */
+	__hc32			hw_info2;        /* see EHCI 3.6.2 */
+#define	QH_SMASK	0x000000ff
+#define	QH_CMASK	0x0000ff00
+#define	QH_HUBADDR	0x007f0000
+#define	QH_HUBPORT	0x3f800000
+#define	QH_MULT		0xc0000000
+	__hc32			hw_current;	/* qtd list - see EHCI 3.6.4 */
+
+	/* qtd overlay (hardware parts of a struct ehci_qtd) */
+	__hc32			hw_qtd_next;
+	__hc32			hw_alt_next;
+	__hc32			hw_token;
+	__hc32			hw_buf[5];
+	__hc32			hw_buf_hi[5];
+} __aligned(32);
+
+struct ehci_qh {
+	struct ehci_qh_hw	*hw;		/* Must come first */
+	/* the rest is HCD-private */
+	dma_addr_t		qh_dma;		/* address of qh */
+	union ehci_shadow	qh_next;	/* ptr to qh; or periodic */
+	struct list_head	qtd_list;	/* sw qtd list */
+	struct list_head	intr_node;	/* list of intr QHs */
+	struct ehci_qtd		*dummy;
+	struct list_head	unlink_node;
+	struct ehci_per_sched	ps;		/* scheduling info */
+
+	unsigned		unlink_cycle;
+
+	u8			qh_state;
+#define	QH_STATE_LINKED		1		/* HC sees this */
+#define	QH_STATE_UNLINK		2		/* HC may still see this */
+#define	QH_STATE_IDLE		3		/* HC doesn't see this */
+#define	QH_STATE_UNLINK_WAIT	4		/* LINKED and on unlink q */
+#define	QH_STATE_COMPLETING	5		/* don't touch token.HALT */
+
+	u8			xacterrs;	/* XactErr retry counter */
+#define	QH_XACTERR_MAX		32		/* XactErr retry limit */
+
+	u8			unlink_reason;
+#define QH_UNLINK_HALTED	0x01		/* Halt flag is set */
+#define QH_UNLINK_SHORT_READ	0x02		/* Recover from a short read */
+#define QH_UNLINK_DUMMY_OVERLAY	0x04		/* QH overlayed the dummy TD */
+#define QH_UNLINK_SHUTDOWN	0x08		/* The HC isn't running */
+#define QH_UNLINK_QUEUE_EMPTY	0x10		/* Reached end of the queue */
+#define QH_UNLINK_REQUESTED	0x20		/* Disable, reset, or dequeue */
+
+	u8			gap_uf;		/* uframes split/csplit gap */
+
+	unsigned		is_out:1;	/* bulk or intr OUT */
+	unsigned		clearing_tt:1;	/* Clear-TT-Buf in progress */
+	unsigned		dequeue_during_giveback:1;
+	unsigned		should_be_inactive:1;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* description of one iso transaction (up to 3 KB data if highspeed) */
+struct ehci_iso_packet {
+	/* These will be copied to iTD when scheduling */
+	u64			bufp;		/* itd->hw_bufp{,_hi}[pg] |= */
+	__hc32			transaction;	/* itd->hw_transaction[i] |= */
+	u8			cross;		/* buf crosses pages */
+	/* for full speed OUT splits */
+	u32			buf1;
+};
+
+/* temporary schedule data for packets from iso urbs (both speeds)
+ * each packet is one logical usb transaction to the device (not TT),
+ * beginning at stream->next_uframe
+ */
+struct ehci_iso_sched {
+	struct list_head	td_list;
+	unsigned		span;
+	unsigned		first_packet;
+	struct ehci_iso_packet	packet[];
+};
+
+/*
+ * ehci_iso_stream - groups all (s)itds for this endpoint.
+ * acts like a qh would, if EHCI had them for ISO.
+ */
+struct ehci_iso_stream {
+	/* first field matches ehci_hq, but is NULL */
+	struct ehci_qh_hw	*hw;
+
+	u8			bEndpointAddress;
+	u8			highspeed;
+	struct list_head	td_list;	/* queued itds/sitds */
+	struct list_head	free_list;	/* list of unused itds/sitds */
+
+	/* output of (re)scheduling */
+	struct ehci_per_sched	ps;		/* scheduling info */
+	unsigned		next_uframe;
+	__hc32			splits;
+
+	/* the rest is derived from the endpoint descriptor,
+	 * including the extra info for hw_bufp[0..2]
+	 */
+	u16			uperiod;	/* period in uframes */
+	u16			maxp;
+	unsigned		bandwidth;
+
+	/* This is used to initialize iTD's hw_bufp fields */
+	__hc32			buf0;
+	__hc32			buf1;
+	__hc32			buf2;
+
+	/* this is used to initialize sITD's tt info */
+	__hc32			address;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.95 Section 3.3
+ * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
+ *
+ * Schedule records for high speed iso xfers
+ */
+struct ehci_itd {
+	/* first part defined by EHCI spec */
+	__hc32			hw_next;           /* see EHCI 3.3.1 */
+	__hc32			hw_transaction[8]; /* see EHCI 3.3.2 */
+#define EHCI_ISOC_ACTIVE        (1<<31)        /* activate transfer this slot */
+#define EHCI_ISOC_BUF_ERR       (1<<30)        /* Data buffer error */
+#define EHCI_ISOC_BABBLE        (1<<29)        /* babble detected */
+#define EHCI_ISOC_XACTERR       (1<<28)        /* XactErr - transaction error */
+#define	EHCI_ITD_LENGTH(tok)	(((tok)>>16) & 0x0fff)
+#define	EHCI_ITD_IOC		(1 << 15)	/* interrupt on complete */
+
+#define ITD_ACTIVE(ehci)	cpu_to_hc32(ehci, EHCI_ISOC_ACTIVE)
+
+	__hc32			hw_bufp[7];	/* see EHCI 3.3.3 */
+	__hc32			hw_bufp_hi[7];	/* Appendix B */
+
+	/* the rest is HCD-private */
+	dma_addr_t		itd_dma;	/* for this itd */
+	union ehci_shadow	itd_next;	/* ptr to periodic q entry */
+
+	struct urb		*urb;
+	struct ehci_iso_stream	*stream;	/* endpoint's queue */
+	struct list_head	itd_list;	/* list of stream's itds */
+
+	/* any/all hw_transactions here may be used by that urb */
+	unsigned		frame;		/* where scheduled */
+	unsigned		pg;
+	unsigned		index[8];	/* in urb->iso_frame_desc */
+} __aligned(32);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.95 Section 3.4
+ * siTD, aka split-transaction isochronous Transfer Descriptor
+ *       ... describe full speed iso xfers through TT in hubs
+ * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD)
+ */
+struct ehci_sitd {
+	/* first part defined by EHCI spec */
+	__hc32			hw_next;
+/* uses bit field macros above - see EHCI 0.95 Table 3-8 */
+	__hc32			hw_fullspeed_ep;	/* EHCI table 3-9 */
+	__hc32			hw_uframe;		/* EHCI table 3-10 */
+	__hc32			hw_results;		/* EHCI table 3-11 */
+#define	SITD_IOC	(1 << 31)	/* interrupt on completion */
+#define	SITD_PAGE	(1 << 30)	/* buffer 0/1 */
+#define	SITD_LENGTH(x)	(((x) >> 16) & 0x3ff)
+#define	SITD_STS_ACTIVE	(1 << 7)	/* HC may execute this */
+#define	SITD_STS_ERR	(1 << 6)	/* error from TT */
+#define	SITD_STS_DBE	(1 << 5)	/* data buffer error (in HC) */
+#define	SITD_STS_BABBLE	(1 << 4)	/* device was babbling */
+#define	SITD_STS_XACT	(1 << 3)	/* illegal IN response */
+#define	SITD_STS_MMF	(1 << 2)	/* incomplete split transaction */
+#define	SITD_STS_STS	(1 << 1)	/* split transaction state */
+
+#define SITD_ACTIVE(ehci)	cpu_to_hc32(ehci, SITD_STS_ACTIVE)
+
+	__hc32			hw_buf[2];		/* EHCI table 3-12 */
+	__hc32			hw_backpointer;		/* EHCI table 3-13 */
+	__hc32			hw_buf_hi[2];		/* Appendix B */
+
+	/* the rest is HCD-private */
+	dma_addr_t		sitd_dma;
+	union ehci_shadow	sitd_next;	/* ptr to periodic q entry */
+
+	struct urb		*urb;
+	struct ehci_iso_stream	*stream;	/* endpoint's queue */
+	struct list_head	sitd_list;	/* list of stream's sitds */
+	unsigned		frame;
+	unsigned		index;
+} __aligned(32);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.96 Section 3.7
+ * Periodic Frame Span Traversal Node (FSTN)
+ *
+ * Manages split interrupt transactions (using TT) that span frame boundaries
+ * into uframes 0/1; see 4.12.2.2.  In those uframes, a "save place" FSTN
+ * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
+ * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
+ */
+struct ehci_fstn {
+	__hc32			hw_next;	/* any periodic q entry */
+	__hc32			hw_prev;	/* qh or EHCI_LIST_END */
+
+	/* the rest is HCD-private */
+	dma_addr_t		fstn_dma;
+	union ehci_shadow	fstn_next;	/* ptr to periodic q entry */
+} __aligned(32);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * USB-2.0 Specification Sections 11.14 and 11.18
+ * Scheduling and budgeting split transactions using TTs
+ *
+ * A hub can have a single TT for all its ports, or multiple TTs (one for each
+ * port).  The bandwidth and budgeting information for the full/low-speed bus
+ * below each TT is self-contained and independent of the other TTs or the
+ * high-speed bus.
+ *
+ * "Bandwidth" refers to the number of microseconds on the FS/LS bus allocated
+ * to an interrupt or isochronous endpoint for each frame.  "Budget" refers to
+ * the best-case estimate of the number of full-speed bytes allocated to an
+ * endpoint for each microframe within an allocated frame.
+ *
+ * Removal of an endpoint invalidates a TT's budget.  Instead of trying to
+ * keep an up-to-date record, we recompute the budget when it is needed.
+ */
+
+struct ehci_tt {
+	u16			bandwidth[EHCI_BANDWIDTH_FRAMES];
+
+	struct list_head	tt_list;	/* List of all ehci_tt's */
+	struct list_head	ps_list;	/* Items using this TT */
+	struct usb_tt		*usb_tt;
+	int			tt_port;	/* TT port number */
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Prepare the PORTSC wakeup flags during controller suspend/resume */
+
+#define ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup)	\
+		ehci_adjust_port_wakeup_flags(ehci, true, do_wakeup)
+
+#define ehci_prepare_ports_for_controller_resume(ehci)			\
+		ehci_adjust_port_wakeup_flags(ehci, false, false)
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USB_EHCI_ROOT_HUB_TT
+
+/*
+ * Some EHCI controllers have a Transaction Translator built into the
+ * root hub. This is a non-standard feature.  Each controller will need
+ * to add code to the following inline functions, and call them as
+ * needed (mostly in root hub code).
+ */
+
+#define	ehci_is_TDI(e)			(ehci_to_hcd(e)->has_tt)
+
+/* Returns the speed of a device attached to a port on the root hub. */
+static inline unsigned int
+ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
+{
+	if (ehci_is_TDI(ehci)) {
+		switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) {
+		case 0:
+			return 0;
+		case 1:
+			return USB_PORT_STAT_LOW_SPEED;
+		case 2:
+		default:
+			return USB_PORT_STAT_HIGH_SPEED;
+		}
+	}
+	return USB_PORT_STAT_HIGH_SPEED;
+}
+
+#else
+
+#define	ehci_is_TDI(e)			(0)
+
+#define	ehci_port_speed(ehci, portsc)	USB_PORT_STAT_HIGH_SPEED
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PPC_83xx
+/* Some Freescale processors have an erratum in which the TT
+ * port number in the queue head was 0..N-1 instead of 1..N.
+ */
+#define	ehci_has_fsl_portno_bug(e)		((e)->has_fsl_port_bug)
+#else
+#define	ehci_has_fsl_portno_bug(e)		(0)
+#endif
+
+#define PORTSC_FSL_PFSC	24	/* Port Force Full-Speed Connect */
+
+#if defined(CONFIG_PPC_85xx)
+/* Some Freescale processors have an erratum (USB A-005275) in which
+ * incoming packets get corrupted in HS mode
+ */
+#define ehci_has_fsl_hs_errata(e)	((e)->has_fsl_hs_errata)
+#else
+#define ehci_has_fsl_hs_errata(e)	(0)
+#endif
+
+/*
+ * Some Freescale/NXP processors have an erratum (USB A-005697)
+ * in which we need to wait for 10ms for bus to enter suspend mode
+ * after setting SUSP bit.
+ */
+#define ehci_has_fsl_susp_errata(e)	((e)->has_fsl_susp_errata)
+
+/*
+ * Some Freescale/NXP processors using ChipIdea IP have a bug in which
+ * disabling the port (PE is cleared) does not cause PEC to be asserted
+ * when frame babble is detected.
+ */
+#define ehci_has_ci_pec_bug(e, portsc) \
+	((e)->has_ci_pec_bug && ((e)->command & CMD_PSE) \
+	 && !(portsc & PORT_PEC) && !(portsc & PORT_PE))
+
+/*
+ * While most USB host controllers implement their registers in
+ * little-endian format, a minority (celleb companion chip) implement
+ * them in big endian format.
+ *
+ * This attempts to support either format at compile time without a
+ * runtime penalty, or both formats with the additional overhead
+ * of checking a flag bit.
+ *
+ * ehci_big_endian_capbase is a special quirk for controllers that
+ * implement the HC capability registers as separate registers and not
+ * as fields of a 32-bit register.
+ */
+
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+#define ehci_big_endian_mmio(e)		((e)->big_endian_mmio)
+#define ehci_big_endian_capbase(e)	((e)->big_endian_capbase)
+#else
+#define ehci_big_endian_mmio(e)		0
+#define ehci_big_endian_capbase(e)	0
+#endif
+
+/*
+ * Big-endian read/write functions are arch-specific.
+ * Other arches can be added if/when they're needed.
+ */
+#if defined(CONFIG_ARM) && defined(CONFIG_ARCH_IXP4XX)
+#define readl_be(addr)		__raw_readl((__force unsigned *)addr)
+#define writel_be(val, addr)	__raw_writel(val, (__force unsigned *)addr)
+#endif
+
+static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
+		__u32 __iomem *regs)
+{
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+	return ehci_big_endian_mmio(ehci) ?
+		readl_be(regs) :
+		readl(regs);
+#else
+	return readl(regs);
+#endif
+}
+
+#ifdef CONFIG_SOC_IMX28
+static inline void imx28_ehci_writel(const unsigned int val,
+		volatile __u32 __iomem *addr)
+{
+	__asm__ ("swp %0, %0, [%1]" : : "r"(val), "r"(addr));
+}
+#else
+static inline void imx28_ehci_writel(const unsigned int val,
+		volatile __u32 __iomem *addr)
+{
+}
+#endif
+static inline void ehci_writel(const struct ehci_hcd *ehci,
+		const unsigned int val, __u32 __iomem *regs)
+{
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+	ehci_big_endian_mmio(ehci) ?
+		writel_be(val, regs) :
+		writel(val, regs);
+#else
+	if (ehci->imx28_write_fix)
+		imx28_ehci_writel(val, regs);
+	else
+		writel(val, regs);
+#endif
+}
+
+/*
+ * On certain ppc-44x SoC there is a HW issue, that could only worked around with
+ * explicit suspend/operate of OHCI. This function hereby makes sense only on that arch.
+ * Other common bits are dependent on has_amcc_usb23 quirk flag.
+ */
+#ifdef CONFIG_44x
+static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
+{
+	u32 hc_control;
+
+	hc_control = (readl_be(ehci->ohci_hcctrl_reg) & ~OHCI_CTRL_HCFS);
+	if (operational)
+		hc_control |= OHCI_USB_OPER;
+	else
+		hc_control |= OHCI_USB_SUSPEND;
+
+	writel_be(hc_control, ehci->ohci_hcctrl_reg);
+	(void) readl_be(ehci->ohci_hcctrl_reg);
+}
+#else
+static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
+{ }
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * The AMCC 440EPx not only implements its EHCI registers in big-endian
+ * format, but also its DMA data structures (descriptors).
+ *
+ * EHCI controllers accessed through PCI work normally (little-endian
+ * everywhere), so we won't bother supporting a BE-only mode for now.
+ */
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
+#define ehci_big_endian_desc(e)		((e)->big_endian_desc)
+
+/* cpu to ehci */
+static inline __hc32 cpu_to_hc32(const struct ehci_hcd *ehci, const u32 x)
+{
+	return ehci_big_endian_desc(ehci)
+		? (__force __hc32)cpu_to_be32(x)
+		: (__force __hc32)cpu_to_le32(x);
+}
+
+/* ehci to cpu */
+static inline u32 hc32_to_cpu(const struct ehci_hcd *ehci, const __hc32 x)
+{
+	return ehci_big_endian_desc(ehci)
+		? be32_to_cpu((__force __be32)x)
+		: le32_to_cpu((__force __le32)x);
+}
+
+static inline u32 hc32_to_cpup(const struct ehci_hcd *ehci, const __hc32 *x)
+{
+	return ehci_big_endian_desc(ehci)
+		? be32_to_cpup((__force __be32 *)x)
+		: le32_to_cpup((__force __le32 *)x);
+}
+
+#else
+
+/* cpu to ehci */
+static inline __hc32 cpu_to_hc32(const struct ehci_hcd *ehci, const u32 x)
+{
+	return cpu_to_le32(x);
+}
+
+/* ehci to cpu */
+static inline u32 hc32_to_cpu(const struct ehci_hcd *ehci, const __hc32 x)
+{
+	return le32_to_cpu(x);
+}
+
+static inline u32 hc32_to_cpup(const struct ehci_hcd *ehci, const __hc32 *x)
+{
+	return le32_to_cpup(x);
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#define ehci_dbg(ehci, fmt, args...) \
+	dev_dbg(ehci_to_hcd(ehci)->self.controller, fmt, ## args)
+#define ehci_err(ehci, fmt, args...) \
+	dev_err(ehci_to_hcd(ehci)->self.controller, fmt, ## args)
+#define ehci_info(ehci, fmt, args...) \
+	dev_info(ehci_to_hcd(ehci)->self.controller, fmt, ## args)
+#define ehci_warn(ehci, fmt, args...) \
+	dev_warn(ehci_to_hcd(ehci)->self.controller, fmt, ## args)
+
+/*-------------------------------------------------------------------------*/
+
+/* Declarations of things exported for use by ehci platform drivers */
+
+struct ehci_driver_overrides {
+	size_t		extra_priv_size;
+	int		(*reset)(struct usb_hcd *hcd);
+	int		(*port_power)(struct usb_hcd *hcd,
+				int portnum, bool enable);
+};
+
+extern void	ehci_init_driver(struct hc_driver *drv,
+				const struct ehci_driver_overrides *over);
+extern int	ehci_setup(struct usb_hcd *hcd);
+extern int	ehci_handshake(struct ehci_hcd *ehci, void __iomem *ptr,
+				u32 mask, u32 done, int usec);
+extern int	ehci_reset(struct ehci_hcd *ehci);
+
+extern int	ehci_suspend(struct usb_hcd *hcd, bool do_wakeup);
+extern int	ehci_resume(struct usb_hcd *hcd, bool force_reset);
+extern void	ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
+			bool suspending, bool do_wakeup);
+
+extern int	ehci_hub_control(struct usb_hcd	*hcd, u16 typeReq, u16 wValue,
+				 u16 wIndex, char *buf, u16 wLength);
+
+#endif /* __LINUX_EHCI_HCD_H */
diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c
new file mode 100644
index 000000000..100048b3b
--- /dev/null
+++ b/drivers/usb/host/fhci-dbg.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include "fhci.h"
+
+void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er)
+{
+	int i;
+
+	if (usb_er == -1) {
+		fhci->usb_irq_stat[12]++;
+		return;
+	}
+
+	for (i = 0; i < 12; ++i) {
+		if (usb_er & (1 << i))
+			fhci->usb_irq_stat[i]++;
+	}
+}
+
+static int fhci_dfs_regs_show(struct seq_file *s, void *v)
+{
+	struct fhci_hcd *fhci = s->private;
+	struct qe_usb_ctlr __iomem *regs = fhci->regs;
+
+	seq_printf(s,
+		"mode: 0x%x\n" "addr: 0x%x\n"
+		"command: 0x%x\n" "ep0: 0x%x\n"
+		"event: 0x%x\n" "mask: 0x%x\n"
+		"status: 0x%x\n" "SOF timer: %d\n"
+		"frame number: %d\n"
+		"lines status: 0x%x\n",
+		in_8(&regs->usb_usmod), in_8(&regs->usb_usadr),
+		in_8(&regs->usb_uscom), in_be16(&regs->usb_usep[0]),
+		in_be16(&regs->usb_usber), in_be16(&regs->usb_usbmr),
+		in_8(&regs->usb_usbs), in_be16(&regs->usb_ussft),
+		in_be16(&regs->usb_usfrn),
+		fhci_ioports_check_bus_state(fhci));
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(fhci_dfs_regs);
+
+static int fhci_dfs_irq_stat_show(struct seq_file *s, void *v)
+{
+	struct fhci_hcd *fhci = s->private;
+	int *usb_irq_stat = fhci->usb_irq_stat;
+
+	seq_printf(s,
+		"RXB: %d\n" "TXB: %d\n" "BSY: %d\n"
+		"SOF: %d\n" "TXE0: %d\n" "TXE1: %d\n"
+		"TXE2: %d\n" "TXE3: %d\n" "IDLE: %d\n"
+		"RESET: %d\n" "SFT: %d\n" "MSF: %d\n"
+		"IDLE_ONLY: %d\n",
+		usb_irq_stat[0], usb_irq_stat[1], usb_irq_stat[2],
+		usb_irq_stat[3], usb_irq_stat[4], usb_irq_stat[5],
+		usb_irq_stat[6], usb_irq_stat[7], usb_irq_stat[8],
+		usb_irq_stat[9], usb_irq_stat[10], usb_irq_stat[11],
+		usb_irq_stat[12]);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(fhci_dfs_irq_stat);
+
+void fhci_dfs_create(struct fhci_hcd *fhci)
+{
+	struct device *dev = fhci_to_hcd(fhci)->self.controller;
+
+	fhci->dfs_root = debugfs_create_dir(dev_name(dev), usb_debug_root);
+
+	debugfs_create_file("regs", S_IFREG | S_IRUGO, fhci->dfs_root, fhci,
+			    &fhci_dfs_regs_fops);
+	debugfs_create_file("irq_stat", S_IFREG | S_IRUGO, fhci->dfs_root, fhci,
+			    &fhci_dfs_irq_stat_fops);
+}
+
+void fhci_dfs_destroy(struct fhci_hcd *fhci)
+{
+	debugfs_remove_recursive(fhci->dfs_root);
+}
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
new file mode 100644
index 000000000..95a44462b
--- /dev/null
+++ b/drivers/usb/host/fhci-hcd.c
@@ -0,0 +1,803 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/gpio/consumer.h>
+#include <soc/fsl/qe/qe.h>
+#include <asm/fsl_gtm.h>
+#include "fhci.h"
+
+void fhci_start_sof_timer(struct fhci_hcd *fhci)
+{
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	/* clear frame_n */
+	out_be16(&fhci->pram->frame_num, 0);
+
+	out_be16(&fhci->regs->usb_ussft, 0);
+	setbits8(&fhci->regs->usb_usmod, USB_MODE_SFTE);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+void fhci_stop_sof_timer(struct fhci_hcd *fhci)
+{
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	clrbits8(&fhci->regs->usb_usmod, USB_MODE_SFTE);
+	gtm_stop_timer16(fhci->timer);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+u16 fhci_get_sof_timer_count(struct fhci_usb *usb)
+{
+	return be16_to_cpu(in_be16(&usb->fhci->regs->usb_ussft) / 12);
+}
+
+/* initialize the endpoint zero */
+static u32 endpoint_zero_init(struct fhci_usb *usb,
+			      enum fhci_mem_alloc data_mem,
+			      u32 ring_len)
+{
+	u32 rc;
+
+	rc = fhci_create_ep(usb, data_mem, ring_len);
+	if (rc)
+		return rc;
+
+	/* inilialize endpoint registers */
+	fhci_init_ep_registers(usb, usb->ep0, data_mem);
+
+	return 0;
+}
+
+/* enable the USB interrupts */
+void fhci_usb_enable_interrupt(struct fhci_usb *usb)
+{
+	struct fhci_hcd *fhci = usb->fhci;
+
+	if (usb->intr_nesting_cnt == 1) {
+		/* initialize the USB interrupt */
+		enable_irq(fhci_to_hcd(fhci)->irq);
+
+		/* initialize the event register and mask register */
+		out_be16(&usb->fhci->regs->usb_usber, 0xffff);
+		out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk);
+
+		/* enable the timer interrupts */
+		enable_irq(fhci->timer->irq);
+	} else if (usb->intr_nesting_cnt > 1)
+		fhci_info(fhci, "unbalanced USB interrupts nesting\n");
+	usb->intr_nesting_cnt--;
+}
+
+/* disable the usb interrupt */
+void fhci_usb_disable_interrupt(struct fhci_usb *usb)
+{
+	struct fhci_hcd *fhci = usb->fhci;
+
+	if (usb->intr_nesting_cnt == 0) {
+		/* disable the timer interrupt */
+		disable_irq_nosync(fhci->timer->irq);
+
+		/* disable the usb interrupt */
+		disable_irq_nosync(fhci_to_hcd(fhci)->irq);
+		out_be16(&usb->fhci->regs->usb_usbmr, 0);
+	}
+	usb->intr_nesting_cnt++;
+}
+
+/* enable the USB controller */
+static u32 fhci_usb_enable(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	out_be16(&usb->fhci->regs->usb_usber, 0xffff);
+	out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk);
+	setbits8(&usb->fhci->regs->usb_usmod, USB_MODE_EN);
+
+	mdelay(100);
+
+	return 0;
+}
+
+/* disable the USB controller */
+static u32 fhci_usb_disable(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	fhci_usb_disable_interrupt(usb);
+	fhci_port_disable(fhci);
+
+	/* disable the usb controller */
+	if (usb->port_status == FHCI_PORT_FULL ||
+			usb->port_status == FHCI_PORT_LOW)
+		fhci_device_disconnected_interrupt(fhci);
+
+	clrbits8(&usb->fhci->regs->usb_usmod, USB_MODE_EN);
+
+	return 0;
+}
+
+/* check the bus state by polling the QE bit on the IO ports */
+int fhci_ioports_check_bus_state(struct fhci_hcd *fhci)
+{
+	u8 bits = 0;
+
+	/* check USBOE,if transmitting,exit */
+	if (!gpiod_get_value(fhci->gpiods[GPIO_USBOE]))
+		return -1;
+
+	/* check USBRP */
+	if (gpiod_get_value(fhci->gpiods[GPIO_USBRP]))
+		bits |= 0x2;
+
+	/* check USBRN */
+	if (gpiod_get_value(fhci->gpiods[GPIO_USBRN]))
+		bits |= 0x1;
+
+	return bits;
+}
+
+static void fhci_mem_free(struct fhci_hcd *fhci)
+{
+	struct ed *ed;
+	struct ed *next_ed;
+	struct td *td;
+	struct td *next_td;
+
+	list_for_each_entry_safe(ed, next_ed, &fhci->empty_eds, node) {
+		list_del(&ed->node);
+		kfree(ed);
+	}
+
+	list_for_each_entry_safe(td, next_td, &fhci->empty_tds, node) {
+		list_del(&td->node);
+		kfree(td);
+	}
+
+	kfree(fhci->vroot_hub);
+	fhci->vroot_hub = NULL;
+
+	kfree(fhci->hc_list);
+	fhci->hc_list = NULL;
+}
+
+static int fhci_mem_init(struct fhci_hcd *fhci)
+{
+	int i;
+
+	fhci->hc_list = kzalloc(sizeof(*fhci->hc_list), GFP_KERNEL);
+	if (!fhci->hc_list)
+		goto err;
+
+	INIT_LIST_HEAD(&fhci->hc_list->ctrl_list);
+	INIT_LIST_HEAD(&fhci->hc_list->bulk_list);
+	INIT_LIST_HEAD(&fhci->hc_list->iso_list);
+	INIT_LIST_HEAD(&fhci->hc_list->intr_list);
+	INIT_LIST_HEAD(&fhci->hc_list->done_list);
+
+	fhci->vroot_hub = kzalloc(sizeof(*fhci->vroot_hub), GFP_KERNEL);
+	if (!fhci->vroot_hub)
+		goto err;
+
+	INIT_LIST_HEAD(&fhci->empty_eds);
+	INIT_LIST_HEAD(&fhci->empty_tds);
+
+	/* initialize work queue to handle done list */
+	fhci_tasklet.data = (unsigned long)fhci;
+	fhci->process_done_task = &fhci_tasklet;
+
+	for (i = 0; i < MAX_TDS; i++) {
+		struct td *td;
+
+		td = kmalloc(sizeof(*td), GFP_KERNEL);
+		if (!td)
+			goto err;
+		fhci_recycle_empty_td(fhci, td);
+	}
+	for (i = 0; i < MAX_EDS; i++) {
+		struct ed *ed;
+
+		ed = kmalloc(sizeof(*ed), GFP_KERNEL);
+		if (!ed)
+			goto err;
+		fhci_recycle_empty_ed(fhci, ed);
+	}
+
+	fhci->active_urbs = 0;
+	return 0;
+err:
+	fhci_mem_free(fhci);
+	return -ENOMEM;
+}
+
+/* destroy the fhci_usb structure */
+static void fhci_usb_free(void *lld)
+{
+	struct fhci_usb *usb = lld;
+	struct fhci_hcd *fhci;
+
+	if (usb) {
+		fhci = usb->fhci;
+		fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+		fhci_ep0_free(usb);
+		kfree(usb->actual_frame);
+		kfree(usb);
+	}
+}
+
+/* initialize the USB */
+static int fhci_usb_init(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	memset_io(usb->fhci->pram, 0, FHCI_PRAM_SIZE);
+
+	usb->port_status = FHCI_PORT_DISABLED;
+	usb->max_frame_usage = FRAME_TIME_USAGE;
+	usb->sw_transaction_time = SW_FIX_TIME_BETWEEN_TRANSACTION;
+
+	usb->actual_frame = kzalloc(sizeof(*usb->actual_frame), GFP_KERNEL);
+	if (!usb->actual_frame) {
+		fhci_usb_free(usb);
+		return -ENOMEM;
+	}
+
+	INIT_LIST_HEAD(&usb->actual_frame->tds_list);
+
+	/* initializing registers on chip, clear frame number */
+	out_be16(&fhci->pram->frame_num, 0);
+
+	/* clear rx state */
+	out_be32(&fhci->pram->rx_state, 0);
+
+	/* set mask register */
+	usb->saved_msk = (USB_E_TXB_MASK |
+			  USB_E_TXE1_MASK |
+			  USB_E_IDLE_MASK |
+			  USB_E_RESET_MASK | USB_E_SFT_MASK | USB_E_MSF_MASK);
+
+	out_8(&usb->fhci->regs->usb_usmod, USB_MODE_HOST | USB_MODE_EN);
+
+	/* clearing the mask register */
+	out_be16(&usb->fhci->regs->usb_usbmr, 0);
+
+	/* initialing the event register */
+	out_be16(&usb->fhci->regs->usb_usber, 0xffff);
+
+	if (endpoint_zero_init(usb, DEFAULT_DATA_MEM, DEFAULT_RING_LEN) != 0) {
+		fhci_usb_free(usb);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* initialize the fhci_usb struct and the corresponding data staruct */
+static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb;
+
+	/* allocate memory for SCC data structure */
+	usb = kzalloc(sizeof(*usb), GFP_KERNEL);
+	if (!usb)
+		return NULL;
+
+	usb->fhci = fhci;
+	usb->hc_list = fhci->hc_list;
+	usb->vroot_hub = fhci->vroot_hub;
+
+	usb->transfer_confirm = fhci_transfer_confirm_callback;
+
+	return usb;
+}
+
+static int fhci_start(struct usb_hcd *hcd)
+{
+	int ret;
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+	ret = fhci_mem_init(fhci);
+	if (ret) {
+		fhci_err(fhci, "failed to allocate memory\n");
+		goto err;
+	}
+
+	fhci->usb_lld = fhci_create_lld(fhci);
+	if (!fhci->usb_lld) {
+		fhci_err(fhci, "low level driver config failed\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ret = fhci_usb_init(fhci);
+	if (ret) {
+		fhci_err(fhci, "low level driver initialize failed\n");
+		goto err;
+	}
+
+	spin_lock_init(&fhci->lock);
+
+	/* connect the virtual root hub */
+	fhci->vroot_hub->dev_num = 1;	/* this field may be needed to fix */
+	fhci->vroot_hub->hub.wHubStatus = 0;
+	fhci->vroot_hub->hub.wHubChange = 0;
+	fhci->vroot_hub->port.wPortStatus = 0;
+	fhci->vroot_hub->port.wPortChange = 0;
+
+	hcd->state = HC_STATE_RUNNING;
+
+	/*
+	 * From here on, hub_wq concurrently accesses the root
+	 * hub; drivers will be talking to enumerated devices.
+	 * (On restart paths, hub_wq already knows about the root
+	 * hub and could find work as soon as we wrote FLAG_CF.)
+	 *
+	 * Before this point the HC was idle/ready.  After, hub_wq
+	 * and device drivers may start it running.
+	 */
+	fhci_usb_enable(fhci);
+	return 0;
+err:
+	fhci_mem_free(fhci);
+	return ret;
+}
+
+static void fhci_stop(struct usb_hcd *hcd)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+	fhci_usb_disable_interrupt(fhci->usb_lld);
+	fhci_usb_disable(fhci);
+
+	fhci_usb_free(fhci->usb_lld);
+	fhci->usb_lld = NULL;
+	fhci_mem_free(fhci);
+}
+
+static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+			    gfp_t mem_flags)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	u32 pipe = urb->pipe;
+	int ret;
+	int i;
+	int size = 0;
+	struct urb_priv *urb_priv;
+	unsigned long flags;
+
+	switch (usb_pipetype(pipe)) {
+	case PIPE_CONTROL:
+		/* 1 td fro setup,1 for ack */
+		size = 2;
+		fallthrough;
+	case PIPE_BULK:
+		/* one td for every 4096 bytes(can be up to 8k) */
+		size += urb->transfer_buffer_length / 4096;
+		/* ...add for any remaining bytes... */
+		if ((urb->transfer_buffer_length % 4096) != 0)
+			size++;
+		/* ..and maybe a zero length packet to wrap it up */
+		if (size == 0)
+			size++;
+		else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
+			 && (urb->transfer_buffer_length
+			     % usb_maxpacket(urb->dev, pipe)) != 0)
+			size++;
+		break;
+	case PIPE_ISOCHRONOUS:
+		size = urb->number_of_packets;
+		if (size <= 0)
+			return -EINVAL;
+		for (i = 0; i < urb->number_of_packets; i++) {
+			urb->iso_frame_desc[i].actual_length = 0;
+			urb->iso_frame_desc[i].status = (u32) (-EXDEV);
+		}
+		break;
+	case PIPE_INTERRUPT:
+		size = 1;
+	}
+
+	/* allocate the private part of the URB */
+	urb_priv = kzalloc(sizeof(*urb_priv), mem_flags);
+	if (!urb_priv)
+		return -ENOMEM;
+
+	/* allocate the private part of the URB */
+	urb_priv->tds = kcalloc(size, sizeof(*urb_priv->tds), mem_flags);
+	if (!urb_priv->tds) {
+		kfree(urb_priv);
+		return -ENOMEM;
+	}
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret)
+		goto err;
+
+	/* fill the private part of the URB */
+	urb_priv->num_of_tds = size;
+
+	urb->status = -EINPROGRESS;
+	urb->actual_length = 0;
+	urb->error_count = 0;
+	urb->hcpriv = urb_priv;
+
+	fhci_queue_urb(fhci, urb);
+err:
+	if (ret) {
+		kfree(urb_priv->tds);
+		kfree(urb_priv);
+	}
+	spin_unlock_irqrestore(&fhci->lock, flags);
+	return ret;
+}
+
+/* dequeue FHCI URB */
+static int fhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	struct fhci_usb *usb = fhci->usb_lld;
+	int ret = -EINVAL;
+	unsigned long flags;
+
+	if (!urb || !urb->dev || !urb->dev->bus)
+		goto out;
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (ret)
+		goto out2;
+
+	if (usb->port_status != FHCI_PORT_DISABLED) {
+		struct urb_priv *urb_priv;
+
+		/*
+		 * flag the urb's data for deletion in some upcoming
+		 * SF interrupt's delete list processing
+		 */
+		urb_priv = urb->hcpriv;
+
+		if (!urb_priv || (urb_priv->state == URB_DEL))
+			goto out2;
+
+		urb_priv->state = URB_DEL;
+
+		/* already pending? */
+		urb_priv->ed->state = FHCI_ED_URB_DEL;
+	} else {
+		fhci_urb_complete_free(fhci, urb);
+	}
+
+out2:
+	spin_unlock_irqrestore(&fhci->lock, flags);
+out:
+	return ret;
+}
+
+static void fhci_endpoint_disable(struct usb_hcd *hcd,
+				  struct usb_host_endpoint *ep)
+{
+	struct fhci_hcd *fhci;
+	struct ed *ed;
+	unsigned long flags;
+
+	fhci = hcd_to_fhci(hcd);
+	spin_lock_irqsave(&fhci->lock, flags);
+	ed = ep->hcpriv;
+	if (ed) {
+		while (ed->td_head != NULL) {
+			struct td *td = fhci_remove_td_from_ed(ed);
+			fhci_urb_complete_free(fhci, td->urb);
+		}
+		fhci_recycle_empty_ed(fhci, ed);
+		ep->hcpriv = NULL;
+	}
+	spin_unlock_irqrestore(&fhci->lock, flags);
+}
+
+static int fhci_get_frame_number(struct usb_hcd *hcd)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+	return get_frame_num(fhci);
+}
+
+static const struct hc_driver fhci_driver = {
+	.description = "fsl,usb-fhci",
+	.product_desc = "FHCI HOST Controller",
+	.hcd_priv_size = sizeof(struct fhci_hcd),
+
+	/* generic hardware linkage */
+	.irq = fhci_irq,
+	.flags = HCD_DMA | HCD_USB11 | HCD_MEMORY,
+
+	/* basic lifecycle operation */
+	.start = fhci_start,
+	.stop = fhci_stop,
+
+	/* managing i/o requests and associated device resources */
+	.urb_enqueue = fhci_urb_enqueue,
+	.urb_dequeue = fhci_urb_dequeue,
+	.endpoint_disable = fhci_endpoint_disable,
+
+	/* scheduling support */
+	.get_frame_number = fhci_get_frame_number,
+
+	/* root hub support */
+	.hub_status_data = fhci_hub_status_data,
+	.hub_control = fhci_hub_control,
+};
+
+static int of_fhci_probe(struct platform_device *ofdev)
+{
+	struct device *dev = &ofdev->dev;
+	struct device_node *node = dev->of_node;
+	struct usb_hcd *hcd;
+	struct fhci_hcd *fhci;
+	struct resource usb_regs;
+	unsigned long pram_addr;
+	unsigned int usb_irq;
+	const char *sprop;
+	const u32 *iprop;
+	int size;
+	int ret;
+	int i;
+	int j;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	sprop = of_get_property(node, "mode", NULL);
+	if (sprop && strcmp(sprop, "host"))
+		return -ENODEV;
+
+	hcd = usb_create_hcd(&fhci_driver, dev, dev_name(dev));
+	if (!hcd) {
+		dev_err(dev, "could not create hcd\n");
+		return -ENOMEM;
+	}
+
+	fhci = hcd_to_fhci(hcd);
+	hcd->self.controller = dev;
+	dev_set_drvdata(dev, hcd);
+
+	iprop = of_get_property(node, "hub-power-budget", &size);
+	if (iprop && size == sizeof(*iprop))
+		hcd->power_budget = *iprop;
+
+	/* FHCI registers. */
+	ret = of_address_to_resource(node, 0, &usb_regs);
+	if (ret) {
+		dev_err(dev, "could not get regs\n");
+		goto err_regs;
+	}
+
+	hcd->regs = ioremap(usb_regs.start, resource_size(&usb_regs));
+	if (!hcd->regs) {
+		dev_err(dev, "could not ioremap regs\n");
+		ret = -ENOMEM;
+		goto err_regs;
+	}
+	fhci->regs = hcd->regs;
+
+	/* Parameter RAM. */
+	iprop = of_get_property(node, "reg", &size);
+	if (!iprop || size < sizeof(*iprop) * 4) {
+		dev_err(dev, "can't get pram offset\n");
+		ret = -EINVAL;
+		goto err_pram;
+	}
+
+	pram_addr = cpm_muram_alloc(FHCI_PRAM_SIZE, 64);
+	if (IS_ERR_VALUE(pram_addr)) {
+		dev_err(dev, "failed to allocate usb pram\n");
+		ret = -ENOMEM;
+		goto err_pram;
+	}
+
+	qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, QE_CR_SUBBLOCK_USB,
+		     QE_CR_PROTOCOL_UNSPECIFIED, pram_addr);
+	fhci->pram = cpm_muram_addr(pram_addr);
+
+	/* GPIOs and pins */
+	for (i = 0; i < NUM_GPIOS; i++) {
+		if (i < GPIO_SPEED)
+			fhci->gpiods[i] = devm_gpiod_get_index(dev,
+					NULL, i, GPIOD_IN);
+
+		else
+			fhci->gpiods[i] = devm_gpiod_get_index_optional(dev,
+					NULL, i, GPIOD_OUT_LOW);
+
+		if (IS_ERR(fhci->gpiods[i])) {
+			dev_err(dev, "incorrect GPIO%d: %ld\n",
+				i, PTR_ERR(fhci->gpiods[i]));
+			goto err_gpios;
+		}
+		if (!fhci->gpiods[i]) {
+			dev_info(dev, "assuming board doesn't have "
+				 "%s gpio\n", i == GPIO_SPEED ?
+				 "speed" : "power");
+		}
+	}
+
+	for (j = 0; j < NUM_PINS; j++) {
+		fhci->pins[j] = qe_pin_request(node, j);
+		if (IS_ERR(fhci->pins[j])) {
+			ret = PTR_ERR(fhci->pins[j]);
+			dev_err(dev, "can't get pin %d: %d\n", j, ret);
+			goto err_pins;
+		}
+	}
+
+	/* Frame limit timer and its interrupt. */
+	fhci->timer = gtm_get_timer16();
+	if (IS_ERR(fhci->timer)) {
+		ret = PTR_ERR(fhci->timer);
+		dev_err(dev, "failed to request qe timer: %i", ret);
+		goto err_get_timer;
+	}
+
+	ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq,
+			  0, "qe timer (usb)", hcd);
+	if (ret) {
+		dev_err(dev, "failed to request timer irq");
+		goto err_timer_irq;
+	}
+
+	/* USB Host interrupt. */
+	usb_irq = irq_of_parse_and_map(node, 0);
+	if (usb_irq == NO_IRQ) {
+		dev_err(dev, "could not get usb irq\n");
+		ret = -EINVAL;
+		goto err_usb_irq;
+	}
+
+	/* Clocks. */
+	sprop = of_get_property(node, "fsl,fullspeed-clock", NULL);
+	if (sprop) {
+		fhci->fullspeed_clk = qe_clock_source(sprop);
+		if (fhci->fullspeed_clk == QE_CLK_DUMMY) {
+			dev_err(dev, "wrong fullspeed-clock\n");
+			ret = -EINVAL;
+			goto err_clocks;
+		}
+	}
+
+	sprop = of_get_property(node, "fsl,lowspeed-clock", NULL);
+	if (sprop) {
+		fhci->lowspeed_clk = qe_clock_source(sprop);
+		if (fhci->lowspeed_clk == QE_CLK_DUMMY) {
+			dev_err(dev, "wrong lowspeed-clock\n");
+			ret = -EINVAL;
+			goto err_clocks;
+		}
+	}
+
+	if (fhci->fullspeed_clk == QE_CLK_NONE &&
+			fhci->lowspeed_clk == QE_CLK_NONE) {
+		dev_err(dev, "no clocks specified\n");
+		ret = -EINVAL;
+		goto err_clocks;
+	}
+
+	dev_info(dev, "at 0x%p, irq %d\n", hcd->regs, usb_irq);
+
+	fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+
+	/* Start with full-speed, if possible. */
+	if (fhci->fullspeed_clk != QE_CLK_NONE) {
+		fhci_config_transceiver(fhci, FHCI_PORT_FULL);
+		qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK);
+	} else {
+		fhci_config_transceiver(fhci, FHCI_PORT_LOW);
+		qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3);
+	}
+
+	/* Clear and disable any pending interrupts. */
+	out_be16(&fhci->regs->usb_usber, 0xffff);
+	out_be16(&fhci->regs->usb_usbmr, 0);
+
+	ret = usb_add_hcd(hcd, usb_irq, 0);
+	if (ret < 0)
+		goto err_add_hcd;
+
+	device_wakeup_enable(hcd->self.controller);
+
+	fhci_dfs_create(fhci);
+
+	return 0;
+
+err_add_hcd:
+err_clocks:
+	irq_dispose_mapping(usb_irq);
+err_usb_irq:
+	free_irq(fhci->timer->irq, hcd);
+err_timer_irq:
+	gtm_put_timer16(fhci->timer);
+err_get_timer:
+err_pins:
+	while (--j >= 0)
+		qe_pin_free(fhci->pins[j]);
+err_gpios:
+	cpm_muram_free(pram_addr);
+err_pram:
+	iounmap(hcd->regs);
+err_regs:
+	usb_put_hcd(hcd);
+	return ret;
+}
+
+static int fhci_remove(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	int j;
+
+	usb_remove_hcd(hcd);
+	free_irq(fhci->timer->irq, hcd);
+	gtm_put_timer16(fhci->timer);
+	cpm_muram_free(cpm_muram_offset(fhci->pram));
+	for (j = 0; j < NUM_PINS; j++)
+		qe_pin_free(fhci->pins[j]);
+	fhci_dfs_destroy(fhci);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+static int of_fhci_remove(struct platform_device *ofdev)
+{
+	return fhci_remove(&ofdev->dev);
+}
+
+static const struct of_device_id of_fhci_match[] = {
+	{ .compatible = "fsl,mpc8323-qe-usb", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_fhci_match);
+
+static struct platform_driver of_fhci_driver = {
+	.driver = {
+		.name = "fsl,usb-fhci",
+		.of_match_table = of_fhci_match,
+	},
+	.probe		= of_fhci_probe,
+	.remove		= of_fhci_remove,
+};
+
+module_platform_driver(of_fhci_driver);
+
+MODULE_DESCRIPTION("USB Freescale Host Controller Interface Driver");
+MODULE_AUTHOR("Shlomi Gridish <gridish@freescale.com>, "
+	      "Jerry Huang <Chang-Ming.Huang@freescale.com>, "
+	      "Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c
new file mode 100644
index 000000000..5f48660eb
--- /dev/null
+++ b/drivers/usb/host/fhci-hub.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/gpio/consumer.h>
+#include <soc/fsl/qe/qe.h>
+#include "fhci.h"
+
+/* virtual root hub specific descriptor */
+static u8 root_hub_des[] = {
+	0x09, /* blength */
+	USB_DT_HUB, /* bDescriptorType;hub-descriptor */
+	0x01, /* bNbrPorts */
+	HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM, /* wHubCharacteristics */
+	0x00, /* per-port power, no overcurrent */
+	0x01, /* bPwrOn2pwrGood;2ms */
+	0x00, /* bHubContrCurrent;0mA */
+	0x00, /* DeviceRemoveable */
+	0xff, /* PortPwrCtrlMask */
+};
+
+static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on)
+{
+	struct gpio_desc *gpiod = fhci->gpiods[gpio_nr];
+
+	if (!gpiod)
+		return;
+
+	gpiod_set_value(gpiod, on);
+	mdelay(5);
+}
+
+void fhci_config_transceiver(struct fhci_hcd *fhci,
+			     enum fhci_port_status status)
+{
+	fhci_dbg(fhci, "-> %s: %d\n", __func__, status);
+
+	switch (status) {
+	case FHCI_PORT_POWER_OFF:
+		fhci_gpio_set_value(fhci, GPIO_POWER, false);
+		break;
+	case FHCI_PORT_DISABLED:
+	case FHCI_PORT_WAITING:
+		fhci_gpio_set_value(fhci, GPIO_POWER, true);
+		break;
+	case FHCI_PORT_LOW:
+		fhci_gpio_set_value(fhci, GPIO_SPEED, false);
+		break;
+	case FHCI_PORT_FULL:
+		fhci_gpio_set_value(fhci, GPIO_SPEED, true);
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+
+	fhci_dbg(fhci, "<- %s: %d\n", __func__, status);
+}
+
+/* disable the USB port by clearing the EN bit in the USBMOD register */
+void fhci_port_disable(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld;
+	enum fhci_port_status port_status;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_stop_sof_timer(fhci);
+
+	fhci_flush_all_transmissions(usb);
+
+	fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld);
+	port_status = usb->port_status;
+	usb->port_status = FHCI_PORT_DISABLED;
+
+	/* Enable IDLE since we want to know if something comes along */
+	usb->saved_msk |= USB_E_IDLE_MASK;
+	out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk);
+
+	/* check if during the disconnection process attached new device */
+	if (port_status == FHCI_PORT_WAITING)
+		fhci_device_connected_interrupt(fhci);
+	usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE;
+	usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE;
+	fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* enable the USB port by setting the EN bit in the USBMOD register */
+void fhci_port_enable(void *lld)
+{
+	struct fhci_usb *usb = (struct fhci_usb *)lld;
+	struct fhci_hcd *fhci = usb->fhci;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_config_transceiver(fhci, usb->port_status);
+
+	if ((usb->port_status != FHCI_PORT_FULL) &&
+			(usb->port_status != FHCI_PORT_LOW))
+		fhci_start_sof_timer(fhci);
+
+	usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE;
+	usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE;
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+void fhci_io_port_generate_reset(struct fhci_hcd *fhci)
+{
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	gpiod_direction_output(fhci->gpiods[GPIO_USBOE], 0);
+	gpiod_direction_output(fhci->gpiods[GPIO_USBTP], 0);
+	gpiod_direction_output(fhci->gpiods[GPIO_USBTN], 0);
+
+	mdelay(5);
+
+	qe_pin_set_dedicated(fhci->pins[PIN_USBOE]);
+	qe_pin_set_dedicated(fhci->pins[PIN_USBTP]);
+	qe_pin_set_dedicated(fhci->pins[PIN_USBTN]);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* generate the RESET condition on the bus */
+void fhci_port_reset(void *lld)
+{
+	struct fhci_usb *usb = (struct fhci_usb *)lld;
+	struct fhci_hcd *fhci = usb->fhci;
+	u8 mode;
+	u16 mask;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_stop_sof_timer(fhci);
+	/* disable the USB controller */
+	mode = in_8(&fhci->regs->usb_usmod);
+	out_8(&fhci->regs->usb_usmod, mode & (~USB_MODE_EN));
+
+	/* disable idle interrupts */
+	mask = in_be16(&fhci->regs->usb_usbmr);
+	out_be16(&fhci->regs->usb_usbmr, mask & (~USB_E_IDLE_MASK));
+
+	fhci_io_port_generate_reset(fhci);
+
+	/* enable interrupt on this endpoint */
+	out_be16(&fhci->regs->usb_usbmr, mask);
+
+	/* enable the USB controller */
+	mode = in_8(&fhci->regs->usb_usmod);
+	out_8(&fhci->regs->usb_usmod, mode | USB_MODE_EN);
+	fhci_start_sof_timer(fhci);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+int fhci_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	int ret = 0;
+	unsigned long flags;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION |
+			USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND |
+			USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) {
+		*buf = 1 << 1;
+		ret = 1;
+		fhci_dbg(fhci, "-- %s\n", __func__);
+	}
+
+	spin_unlock_irqrestore(&fhci->lock, flags);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+
+	return ret;
+}
+
+int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+			    u16 wIndex, char *buf, u16 wLength)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	int retval = 0;
+	struct usb_hub_status *hub_status;
+	struct usb_port_status *port_status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	switch (typeReq) {
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		fhci->vroot_hub->feature &= (1 << wValue);
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			fhci->vroot_hub->port.wPortStatus &=
+			    ~USB_PORT_STAT_ENABLE;
+			fhci_port_disable(fhci);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_ENABLE;
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			fhci->vroot_hub->port.wPortStatus &=
+			    ~USB_PORT_STAT_SUSPEND;
+			fhci_stop_sof_timer(fhci);
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_SUSPEND;
+			break;
+		case USB_PORT_FEAT_POWER:
+			fhci->vroot_hub->port.wPortStatus &=
+			    ~USB_PORT_STAT_POWER;
+			fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_CONNECTION;
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_OVERCURRENT;
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_RESET;
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case GetHubDescriptor:
+		memcpy(buf, root_hub_des, sizeof(root_hub_des));
+		break;
+	case GetHubStatus:
+		hub_status = (struct usb_hub_status *)buf;
+		hub_status->wHubStatus =
+		    cpu_to_le16(fhci->vroot_hub->hub.wHubStatus);
+		hub_status->wHubChange =
+		    cpu_to_le16(fhci->vroot_hub->hub.wHubChange);
+		break;
+	case GetPortStatus:
+		port_status = (struct usb_port_status *)buf;
+		port_status->wPortStatus =
+		    cpu_to_le16(fhci->vroot_hub->port.wPortStatus);
+		port_status->wPortChange =
+		    cpu_to_le16(fhci->vroot_hub->port.wPortChange);
+		break;
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetPortFeature:
+		fhci->vroot_hub->feature |= (1 << wValue);
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_ENABLE;
+			fhci_port_enable(fhci->usb_lld);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_SUSPEND;
+			fhci_stop_sof_timer(fhci);
+			break;
+		case USB_PORT_FEAT_RESET:
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_RESET;
+			fhci_port_reset(fhci->usb_lld);
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_ENABLE;
+			fhci->vroot_hub->port.wPortStatus &=
+			    ~USB_PORT_STAT_RESET;
+			break;
+		case USB_PORT_FEAT_POWER:
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_POWER;
+			fhci_config_transceiver(fhci, FHCI_PORT_WAITING);
+			break;
+		default:
+			goto error;
+		}
+		break;
+	default:
+error:
+		retval = -EPIPE;
+	}
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+
+	spin_unlock_irqrestore(&fhci->lock, flags);
+
+	return retval;
+}
diff --git a/drivers/usb/host/fhci-mem.c b/drivers/usb/host/fhci-mem.c
new file mode 100644
index 000000000..658aedc6a
--- /dev/null
+++ b/drivers/usb/host/fhci-mem.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include "fhci.h"
+
+static void init_td(struct td *td)
+{
+	memset(td, 0, sizeof(*td));
+	INIT_LIST_HEAD(&td->node);
+	INIT_LIST_HEAD(&td->frame_lh);
+}
+
+static void init_ed(struct ed *ed)
+{
+	memset(ed, 0, sizeof(*ed));
+	INIT_LIST_HEAD(&ed->td_list);
+	INIT_LIST_HEAD(&ed->node);
+}
+
+static struct td *get_empty_td(struct fhci_hcd *fhci)
+{
+	struct td *td;
+
+	if (!list_empty(&fhci->empty_tds)) {
+		td = list_entry(fhci->empty_tds.next, struct td, node);
+		list_del(fhci->empty_tds.next);
+	} else {
+		td = kmalloc(sizeof(*td), GFP_ATOMIC);
+		if (!td)
+			fhci_err(fhci, "No memory to allocate to TD\n");
+		else
+			init_td(td);
+	}
+
+	return td;
+}
+
+void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td)
+{
+	init_td(td);
+	list_add(&td->node, &fhci->empty_tds);
+}
+
+struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci)
+{
+	struct ed *ed;
+
+	if (!list_empty(&fhci->empty_eds)) {
+		ed = list_entry(fhci->empty_eds.next, struct ed, node);
+		list_del(fhci->empty_eds.next);
+	} else {
+		ed = kmalloc(sizeof(*ed), GFP_ATOMIC);
+		if (!ed)
+			fhci_err(fhci, "No memory to allocate to ED\n");
+		else
+			init_ed(ed);
+	}
+
+	return ed;
+}
+
+void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed)
+{
+	init_ed(ed);
+	list_add(&ed->node, &fhci->empty_eds);
+}
+
+struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb,
+			struct urb_priv *urb_priv, struct ed *ed, u16 index,
+			enum fhci_ta_type type, int toggle, u8 *data, u32 len,
+			u16 interval, u16 start_frame, bool ioc)
+{
+	struct td *td = get_empty_td(fhci);
+
+	if (!td)
+		return NULL;
+
+	td->urb = urb;
+	td->ed = ed;
+	td->type = type;
+	td->toggle = toggle;
+	td->data = data;
+	td->len = len;
+	td->iso_index = index;
+	td->interval = interval;
+	td->start_frame = start_frame;
+	td->ioc = ioc;
+	td->status = USB_TD_OK;
+
+	urb_priv->tds[index] = td;
+
+	return td;
+}
diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c
new file mode 100644
index 000000000..669c24052
--- /dev/null
+++ b/drivers/usb/host/fhci-q.c
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include "fhci.h"
+
+/* maps the hardware error code to the USB error code */
+static int status_to_error(u32 status)
+{
+	if (status == USB_TD_OK)
+		return 0;
+	else if (status & USB_TD_RX_ER_CRC)
+		return -EILSEQ;
+	else if (status & USB_TD_RX_ER_NONOCT)
+		return -EPROTO;
+	else if (status & USB_TD_RX_ER_OVERUN)
+		return -ECOMM;
+	else if (status & USB_TD_RX_ER_BITSTUFF)
+		return -EPROTO;
+	else if (status & USB_TD_RX_ER_PID)
+		return -EILSEQ;
+	else if (status & (USB_TD_TX_ER_NAK | USB_TD_TX_ER_TIMEOUT))
+		return -ETIMEDOUT;
+	else if (status & USB_TD_TX_ER_STALL)
+		return -EPIPE;
+	else if (status & USB_TD_TX_ER_UNDERUN)
+		return -ENOSR;
+	else if (status & USB_TD_RX_DATA_UNDERUN)
+		return -EREMOTEIO;
+	else if (status & USB_TD_RX_DATA_OVERUN)
+		return -EOVERFLOW;
+	else
+		return -EINVAL;
+}
+
+void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td)
+{
+	list_add_tail(&td->frame_lh, &frame->tds_list);
+}
+
+void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number)
+{
+	int i;
+
+	for (i = 0; i < number; i++) {
+		struct td *td = td_list[i];
+		list_add_tail(&td->node, &ed->td_list);
+	}
+	if (ed->td_head == NULL)
+		ed->td_head = td_list[0];
+}
+
+static struct td *peek_td_from_ed(struct ed *ed)
+{
+	struct td *td;
+
+	if (!list_empty(&ed->td_list))
+		td = list_entry(ed->td_list.next, struct td, node);
+	else
+		td = NULL;
+
+	return td;
+}
+
+struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame)
+{
+	struct td *td;
+
+	if (!list_empty(&frame->tds_list)) {
+		td = list_entry(frame->tds_list.next, struct td, frame_lh);
+		list_del_init(frame->tds_list.next);
+	} else
+		td = NULL;
+
+	return td;
+}
+
+struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame)
+{
+	struct td *td;
+
+	if (!list_empty(&frame->tds_list))
+		td = list_entry(frame->tds_list.next, struct td, frame_lh);
+	else
+		td = NULL;
+
+	return td;
+}
+
+struct td *fhci_remove_td_from_ed(struct ed *ed)
+{
+	struct td *td;
+
+	if (!list_empty(&ed->td_list)) {
+		td = list_entry(ed->td_list.next, struct td, node);
+		list_del_init(ed->td_list.next);
+
+		/* if this TD was the ED's head, find next TD */
+		if (!list_empty(&ed->td_list))
+			ed->td_head = list_entry(ed->td_list.next, struct td,
+						 node);
+		else
+			ed->td_head = NULL;
+	} else
+		td = NULL;
+
+	return td;
+}
+
+struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list)
+{
+	struct td *td;
+
+	if (!list_empty(&p_list->done_list)) {
+		td = list_entry(p_list->done_list.next, struct td, node);
+		list_del_init(p_list->done_list.next);
+	} else
+		td = NULL;
+
+	return td;
+}
+
+void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed)
+{
+	struct td *td;
+
+	td = ed->td_head;
+	list_del_init(&td->node);
+
+	/* If this TD was the ED's head,find next TD */
+	if (!list_empty(&ed->td_list))
+		ed->td_head = list_entry(ed->td_list.next, struct td, node);
+	else {
+		ed->td_head = NULL;
+		ed->state = FHCI_ED_SKIP;
+	}
+	ed->toggle_carry = td->toggle;
+	list_add_tail(&td->node, &usb->hc_list->done_list);
+	if (td->ioc)
+		usb->transfer_confirm(usb->fhci);
+}
+
+/* free done FHCI URB resource such as ED and TD */
+static void free_urb_priv(struct fhci_hcd *fhci, struct urb *urb)
+{
+	int i;
+	struct urb_priv *urb_priv = urb->hcpriv;
+	struct ed *ed = urb_priv->ed;
+
+	for (i = 0; i < urb_priv->num_of_tds; i++) {
+		list_del_init(&urb_priv->tds[i]->node);
+		fhci_recycle_empty_td(fhci, urb_priv->tds[i]);
+	}
+
+	/* if this TD was the ED's head,find the next TD */
+	if (!list_empty(&ed->td_list))
+		ed->td_head = list_entry(ed->td_list.next, struct td, node);
+	else
+		ed->td_head = NULL;
+
+	kfree(urb_priv->tds);
+	kfree(urb_priv);
+	urb->hcpriv = NULL;
+
+	/* if this TD was the ED's head,find next TD */
+	if (ed->td_head == NULL)
+		list_del_init(&ed->node);
+	fhci->active_urbs--;
+}
+
+/* this routine called to complete and free done URB */
+void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb)
+{
+	free_urb_priv(fhci, urb);
+
+	if (urb->status == -EINPROGRESS) {
+		if (urb->actual_length != urb->transfer_buffer_length &&
+				urb->transfer_flags & URB_SHORT_NOT_OK)
+			urb->status = -EREMOTEIO;
+		else
+			urb->status = 0;
+	}
+
+	usb_hcd_unlink_urb_from_ep(fhci_to_hcd(fhci), urb);
+
+	spin_unlock(&fhci->lock);
+
+	usb_hcd_giveback_urb(fhci_to_hcd(fhci), urb, urb->status);
+
+	spin_lock(&fhci->lock);
+}
+
+/*
+ * caculate transfer length/stats and update the urb
+ * Precondition: irqsafe(only for urb-?status locking)
+ */
+void fhci_done_td(struct urb *urb, struct td *td)
+{
+	struct ed *ed = td->ed;
+	u32 cc = td->status;
+
+	/* ISO...drivers see per-TD length/status */
+	if (ed->mode == FHCI_TF_ISO) {
+		u32 len;
+		if (!(urb->transfer_flags & URB_SHORT_NOT_OK &&
+				cc == USB_TD_RX_DATA_UNDERUN))
+			cc = USB_TD_OK;
+
+		if (usb_pipeout(urb->pipe))
+			len = urb->iso_frame_desc[td->iso_index].length;
+		else
+			len = td->actual_len;
+
+		urb->actual_length += len;
+		urb->iso_frame_desc[td->iso_index].actual_length = len;
+		urb->iso_frame_desc[td->iso_index].status =
+			status_to_error(cc);
+	}
+
+	/* BULK,INT,CONTROL... drivers see aggregate length/status,
+	 * except that "setup" bytes aren't counted and "short" transfers
+	 * might not be reported as errors.
+	 */
+	else {
+		if (td->error_cnt >= 3)
+			urb->error_count = 3;
+
+		/* control endpoint only have soft stalls */
+
+		/* update packet status if needed(short may be ok) */
+		if (!(urb->transfer_flags & URB_SHORT_NOT_OK) &&
+				cc == USB_TD_RX_DATA_UNDERUN) {
+			ed->state = FHCI_ED_OPER;
+			cc = USB_TD_OK;
+		}
+		if (cc != USB_TD_OK) {
+			if (urb->status == -EINPROGRESS)
+				urb->status = status_to_error(cc);
+		}
+
+		/* count all non-empty packets except control SETUP packet */
+		if (td->type != FHCI_TA_SETUP || td->iso_index != 0)
+			urb->actual_length += td->actual_len;
+	}
+}
+
+/* there are some pedning request to unlink */
+void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed)
+{
+	struct td *td = peek_td_from_ed(ed);
+	struct urb *urb = td->urb;
+	struct urb_priv *urb_priv = urb->hcpriv;
+
+	if (urb_priv->state == URB_DEL) {
+		td = fhci_remove_td_from_ed(ed);
+		/* HC may have partly processed this TD */
+		if (td->status != USB_TD_INPROGRESS)
+			fhci_done_td(urb, td);
+
+		/* URB is done;clean up */
+		if (++(urb_priv->tds_cnt) == urb_priv->num_of_tds)
+			fhci_urb_complete_free(fhci, urb);
+	}
+}
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
new file mode 100644
index 000000000..a45ede80e
--- /dev/null
+++ b/drivers/usb/host/fhci-sched.c
@@ -0,0 +1,891 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006, 2011.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <soc/fsl/qe/qe.h>
+#include <asm/fsl_gtm.h>
+#include "fhci.h"
+
+static void recycle_frame(struct fhci_usb *usb, struct packet *pkt)
+{
+	pkt->data = NULL;
+	pkt->len = 0;
+	pkt->status = USB_TD_OK;
+	pkt->info = 0;
+	pkt->priv_data = NULL;
+
+	cq_put(&usb->ep0->empty_frame_Q, pkt);
+}
+
+/* confirm submitted packet */
+void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt)
+{
+	struct td *td;
+	struct packet *td_pkt;
+	struct ed *ed;
+	u32 trans_len;
+	bool td_done = false;
+
+	td = fhci_remove_td_from_frame(usb->actual_frame);
+	td_pkt = td->pkt;
+	trans_len = pkt->len;
+	td->status = pkt->status;
+	if (td->type == FHCI_TA_IN && td_pkt->info & PKT_DUMMY_PACKET) {
+		if ((td->data + td->actual_len) && trans_len)
+			memcpy(td->data + td->actual_len, pkt->data,
+			       trans_len);
+		cq_put(&usb->ep0->dummy_packets_Q, pkt->data);
+	}
+
+	recycle_frame(usb, pkt);
+
+	ed = td->ed;
+	if (ed->mode == FHCI_TF_ISO) {
+		if (ed->td_list.next->next != &ed->td_list) {
+			struct td *td_next =
+			    list_entry(ed->td_list.next->next, struct td,
+				       node);
+
+			td_next->start_frame = usb->actual_frame->frame_num;
+		}
+		td->actual_len = trans_len;
+		td_done = true;
+	} else if ((td->status & USB_TD_ERROR) &&
+			!(td->status & USB_TD_TX_ER_NAK)) {
+		/*
+		 * There was an error on the transaction (but not NAK).
+		 * If it is fatal error (data underrun, stall, bad pid or 3
+		 * errors exceeded), mark this TD as done.
+		 */
+		if ((td->status & USB_TD_RX_DATA_UNDERUN) ||
+				(td->status & USB_TD_TX_ER_STALL) ||
+				(td->status & USB_TD_RX_ER_PID) ||
+				(++td->error_cnt >= 3)) {
+			ed->state = FHCI_ED_HALTED;
+			td_done = true;
+
+			if (td->status & USB_TD_RX_DATA_UNDERUN) {
+				fhci_dbg(usb->fhci, "td err fu\n");
+				td->toggle = !td->toggle;
+				td->actual_len += trans_len;
+			} else {
+				fhci_dbg(usb->fhci, "td err f!u\n");
+			}
+		} else {
+			fhci_dbg(usb->fhci, "td err !f\n");
+			/* it is not a fatal error -retry this transaction */
+			td->nak_cnt = 0;
+			td->error_cnt++;
+			td->status = USB_TD_OK;
+		}
+	} else if (td->status & USB_TD_TX_ER_NAK) {
+		/* there was a NAK response */
+		fhci_vdbg(usb->fhci, "td nack\n");
+		td->nak_cnt++;
+		td->error_cnt = 0;
+		td->status = USB_TD_OK;
+	} else {
+		/* there was no error on transaction */
+		td->error_cnt = 0;
+		td->nak_cnt = 0;
+		td->toggle = !td->toggle;
+		td->actual_len += trans_len;
+
+		if (td->len == td->actual_len)
+			td_done = true;
+	}
+
+	if (td_done)
+		fhci_move_td_from_ed_to_done_list(usb, ed);
+}
+
+/*
+ * Flush all transmitted packets from BDs
+ * This routine is called when disabling the USB port to flush all
+ * transmissions that are already scheduled in the BDs
+ */
+void fhci_flush_all_transmissions(struct fhci_usb *usb)
+{
+	u8 mode;
+	struct td *td;
+
+	mode = in_8(&usb->fhci->regs->usb_usmod);
+	clrbits8(&usb->fhci->regs->usb_usmod, USB_MODE_EN);
+
+	fhci_flush_bds(usb);
+
+	while ((td = fhci_peek_td_from_frame(usb->actual_frame)) != NULL) {
+		struct packet *pkt = td->pkt;
+
+		pkt->status = USB_TD_TX_ER_TIMEOUT;
+		fhci_transaction_confirm(usb, pkt);
+	}
+
+	usb->actual_frame->frame_status = FRAME_END_TRANSMISSION;
+
+	/* reset the event register */
+	out_be16(&usb->fhci->regs->usb_usber, 0xffff);
+	/* enable the USB controller */
+	out_8(&usb->fhci->regs->usb_usmod, mode | USB_MODE_EN);
+}
+
+/*
+ * This function forms the packet and transmit the packet. This function
+ * will handle all endpoint type:ISO,interrupt,control and bulk
+ */
+static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td)
+{
+	u32 fw_transaction_time, len = 0;
+	struct packet *pkt;
+	u8 *data = NULL;
+
+	/* calcalate data address,len and toggle and then add the transaction */
+	if (td->toggle == USB_TD_TOGGLE_CARRY)
+		td->toggle = ed->toggle_carry;
+
+	switch (ed->mode) {
+	case FHCI_TF_ISO:
+		len = td->len;
+		if (td->type != FHCI_TA_IN)
+			data = td->data;
+		break;
+	case FHCI_TF_CTRL:
+	case FHCI_TF_BULK:
+		len = min(td->len - td->actual_len, ed->max_pkt_size);
+		if (!((td->type == FHCI_TA_IN) &&
+		      ((len + td->actual_len) == td->len)))
+			data = td->data + td->actual_len;
+		break;
+	case FHCI_TF_INTR:
+		len = min(td->len, ed->max_pkt_size);
+		if (!((td->type == FHCI_TA_IN) &&
+		      ((td->len + CRC_SIZE) >= ed->max_pkt_size)))
+			data = td->data;
+		break;
+	default:
+		break;
+	}
+
+	if (usb->port_status == FHCI_PORT_FULL)
+		fw_transaction_time = (((len + PROTOCOL_OVERHEAD) * 11) >> 4);
+	else
+		fw_transaction_time = ((len + PROTOCOL_OVERHEAD) * 6);
+
+	/* check if there's enough space in this frame to submit this TD */
+	if (usb->actual_frame->total_bytes + len + PROTOCOL_OVERHEAD >=
+			usb->max_bytes_per_frame) {
+		fhci_vdbg(usb->fhci, "not enough space in this frame: "
+			  "%d %d %d\n", usb->actual_frame->total_bytes, len,
+			  usb->max_bytes_per_frame);
+		return -1;
+	}
+
+	/* check if there's enough time in this frame to submit this TD */
+	if (usb->actual_frame->frame_status != FRAME_IS_PREPARED &&
+	    (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION ||
+	     (fw_transaction_time + usb->sw_transaction_time >=
+	      1000 - fhci_get_sof_timer_count(usb)))) {
+		fhci_dbg(usb->fhci, "not enough time in this frame\n");
+		return -1;
+	}
+
+	/* update frame object fields before transmitting */
+	pkt = cq_get(&usb->ep0->empty_frame_Q);
+	if (!pkt) {
+		fhci_dbg(usb->fhci, "there is no empty frame\n");
+		return -1;
+	}
+	td->pkt = pkt;
+
+	pkt->info = 0;
+	if (data == NULL) {
+		data = cq_get(&usb->ep0->dummy_packets_Q);
+		BUG_ON(!data);
+		pkt->info = PKT_DUMMY_PACKET;
+	}
+	pkt->data = data;
+	pkt->len = len;
+	pkt->status = USB_TD_OK;
+	/* update TD status field before transmitting */
+	td->status = USB_TD_INPROGRESS;
+	/* update actual frame time object with the actual transmission */
+	usb->actual_frame->total_bytes += (len + PROTOCOL_OVERHEAD);
+	fhci_add_td_to_frame(usb->actual_frame, td);
+
+	if (usb->port_status != FHCI_PORT_FULL &&
+			usb->port_status != FHCI_PORT_LOW) {
+		pkt->status = USB_TD_TX_ER_TIMEOUT;
+		pkt->len = 0;
+		fhci_transaction_confirm(usb, pkt);
+	} else if (fhci_host_transaction(usb, pkt, td->type, ed->dev_addr,
+			ed->ep_addr, ed->mode, ed->speed, td->toggle)) {
+		/* remove TD from actual frame */
+		list_del_init(&td->frame_lh);
+		td->status = USB_TD_OK;
+		if (pkt->info & PKT_DUMMY_PACKET)
+			cq_put(&usb->ep0->dummy_packets_Q, pkt->data);
+		recycle_frame(usb, pkt);
+		usb->actual_frame->total_bytes -= (len + PROTOCOL_OVERHEAD);
+		fhci_err(usb->fhci, "host transaction failed\n");
+		return -1;
+	}
+
+	return len;
+}
+
+static void move_head_to_tail(struct list_head *list)
+{
+	struct list_head *node = list->next;
+
+	if (!list_empty(list)) {
+		list_move_tail(node, list);
+	}
+}
+
+/*
+ * This function goes through the endpoint list and schedules the
+ * transactions within this list
+ */
+static int scan_ed_list(struct fhci_usb *usb,
+			struct list_head *list, enum fhci_tf_mode list_type)
+{
+	static const int frame_part[4] = {
+		[FHCI_TF_CTRL] = MAX_BYTES_PER_FRAME,
+		[FHCI_TF_ISO] = (MAX_BYTES_PER_FRAME *
+				 MAX_PERIODIC_FRAME_USAGE) / 100,
+		[FHCI_TF_BULK] = MAX_BYTES_PER_FRAME,
+		[FHCI_TF_INTR] = (MAX_BYTES_PER_FRAME *
+				  MAX_PERIODIC_FRAME_USAGE) / 100
+	};
+	struct ed *ed;
+	struct td *td;
+	int ans = 1;
+	u32 save_transaction_time = usb->sw_transaction_time;
+
+	list_for_each_entry(ed, list, node) {
+		td = ed->td_head;
+
+		if (!td || td->status == USB_TD_INPROGRESS)
+			continue;
+
+		if (ed->state != FHCI_ED_OPER) {
+			if (ed->state == FHCI_ED_URB_DEL) {
+				td->status = USB_TD_OK;
+				fhci_move_td_from_ed_to_done_list(usb, ed);
+				ed->state = FHCI_ED_SKIP;
+			}
+			continue;
+		}
+
+		/*
+		 * if it isn't interrupt pipe or it is not iso pipe and the
+		 * interval time passed
+		 */
+		if ((list_type == FHCI_TF_INTR || list_type == FHCI_TF_ISO) &&
+				(((usb->actual_frame->frame_num -
+				   td->start_frame) & 0x7ff) < td->interval))
+			continue;
+
+		if (add_packet(usb, ed, td) < 0)
+			continue;
+
+		/* update time stamps in the TD */
+		td->start_frame = usb->actual_frame->frame_num;
+		usb->sw_transaction_time += save_transaction_time;
+
+		if (usb->actual_frame->total_bytes >=
+					usb->max_bytes_per_frame) {
+			usb->actual_frame->frame_status =
+				FRAME_DATA_END_TRANSMISSION;
+			fhci_push_dummy_bd(usb->ep0);
+			ans = 0;
+			break;
+		}
+
+		if (usb->actual_frame->total_bytes >= frame_part[list_type])
+			break;
+	}
+
+	/* be fair to each ED(move list head around) */
+	move_head_to_tail(list);
+	usb->sw_transaction_time = save_transaction_time;
+
+	return ans;
+}
+
+static u32 rotate_frames(struct fhci_usb *usb)
+{
+	struct fhci_hcd *fhci = usb->fhci;
+
+	if (!list_empty(&usb->actual_frame->tds_list)) {
+		if ((((in_be16(&fhci->pram->frame_num) & 0x07ff) -
+		      usb->actual_frame->frame_num) & 0x7ff) > 5)
+			fhci_flush_actual_frame(usb);
+		else
+			return -EINVAL;
+	}
+
+	usb->actual_frame->frame_status = FRAME_IS_PREPARED;
+	usb->actual_frame->frame_num = in_be16(&fhci->pram->frame_num) & 0x7ff;
+	usb->actual_frame->total_bytes = 0;
+
+	return 0;
+}
+
+/*
+ * This function schedule the USB transaction and will process the
+ * endpoint in the following order: iso, interrupt, control and bulk.
+ */
+void fhci_schedule_transactions(struct fhci_usb *usb)
+{
+	int left = 1;
+
+	if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)
+		if (rotate_frames(usb) != 0)
+			return;
+
+	if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)
+		return;
+
+	if (usb->actual_frame->total_bytes == 0) {
+		/*
+		 * schedule the next available ISO transfer
+		 *or next stage of the ISO transfer
+		 */
+		scan_ed_list(usb, &usb->hc_list->iso_list, FHCI_TF_ISO);
+
+		/*
+		 * schedule the next available interrupt transfer or
+		 * the next stage of the interrupt transfer
+		 */
+		scan_ed_list(usb, &usb->hc_list->intr_list, FHCI_TF_INTR);
+
+		/*
+		 * schedule the next available control transfer
+		 * or the next stage of the control transfer
+		 */
+		left = scan_ed_list(usb, &usb->hc_list->ctrl_list,
+				    FHCI_TF_CTRL);
+	}
+
+	/*
+	 * schedule the next available bulk transfer or the next stage of the
+	 * bulk transfer
+	 */
+	if (left > 0)
+		scan_ed_list(usb, &usb->hc_list->bulk_list, FHCI_TF_BULK);
+}
+
+/* Handles SOF interrupt */
+static void sof_interrupt(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	if ((usb->port_status == FHCI_PORT_DISABLED) &&
+	    (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_CONNECTION) &&
+	    !(usb->vroot_hub->port.wPortChange & USB_PORT_STAT_C_CONNECTION)) {
+		if (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_LOW_SPEED)
+			usb->port_status = FHCI_PORT_LOW;
+		else
+			usb->port_status = FHCI_PORT_FULL;
+		/* Disable IDLE */
+		usb->saved_msk &= ~USB_E_IDLE_MASK;
+		out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk);
+	}
+
+	gtm_set_exact_timer16(fhci->timer, usb->max_frame_usage, false);
+
+	fhci_host_transmit_actual_frame(usb);
+	usb->actual_frame->frame_status = FRAME_IS_TRANSMITTED;
+
+	fhci_schedule_transactions(usb);
+}
+
+/* Handles device disconnected interrupt on port */
+void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_usb_disable_interrupt(usb);
+	clrbits8(&usb->fhci->regs->usb_usmod, USB_MODE_LSS);
+	usb->port_status = FHCI_PORT_DISABLED;
+
+	fhci_stop_sof_timer(fhci);
+
+	/* Enable IDLE since we want to know if something comes along */
+	usb->saved_msk |= USB_E_IDLE_MASK;
+	out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk);
+
+	usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_CONNECTION;
+	usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_CONNECTION;
+	usb->max_bytes_per_frame = 0;
+	fhci_usb_enable_interrupt(usb);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* detect a new device connected on the USB port */
+void fhci_device_connected_interrupt(struct fhci_hcd *fhci)
+{
+
+	struct fhci_usb *usb = fhci->usb_lld;
+	int state;
+	int ret;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_usb_disable_interrupt(usb);
+	state = fhci_ioports_check_bus_state(fhci);
+
+	/* low-speed device was connected to the USB port */
+	if (state == 1) {
+		ret = qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3);
+		if (ret) {
+			fhci_warn(fhci, "Low-Speed device is not supported, "
+				  "try use BRGx\n");
+			goto out;
+		}
+
+		usb->port_status = FHCI_PORT_LOW;
+		setbits8(&usb->fhci->regs->usb_usmod, USB_MODE_LSS);
+		usb->vroot_hub->port.wPortStatus |=
+		    (USB_PORT_STAT_LOW_SPEED |
+		     USB_PORT_STAT_CONNECTION);
+		usb->vroot_hub->port.wPortChange |=
+		    USB_PORT_STAT_C_CONNECTION;
+		usb->max_bytes_per_frame =
+		    (MAX_BYTES_PER_FRAME >> 3) - 7;
+		fhci_port_enable(usb);
+	} else if (state == 2) {
+		ret = qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK);
+		if (ret) {
+			fhci_warn(fhci, "Full-Speed device is not supported, "
+				  "try use CLKx\n");
+			goto out;
+		}
+
+		usb->port_status = FHCI_PORT_FULL;
+		clrbits8(&usb->fhci->regs->usb_usmod, USB_MODE_LSS);
+		usb->vroot_hub->port.wPortStatus &=
+		    ~USB_PORT_STAT_LOW_SPEED;
+		usb->vroot_hub->port.wPortStatus |=
+		    USB_PORT_STAT_CONNECTION;
+		usb->vroot_hub->port.wPortChange |=
+		    USB_PORT_STAT_C_CONNECTION;
+		usb->max_bytes_per_frame = (MAX_BYTES_PER_FRAME - 15);
+		fhci_port_enable(usb);
+	}
+out:
+	fhci_usb_enable_interrupt(usb);
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd)
+{
+	struct usb_hcd *hcd = _hcd;
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	spin_lock(&fhci->lock);
+
+	gtm_set_exact_timer16(fhci->timer, 1000, false);
+
+	if (usb->actual_frame->frame_status == FRAME_IS_TRANSMITTED) {
+		usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION;
+		fhci_push_dummy_bd(usb->ep0);
+	}
+
+	fhci_schedule_transactions(usb);
+
+	spin_unlock(&fhci->lock);
+
+	return IRQ_HANDLED;
+}
+
+/* Cancel transmission on the USB endpoint */
+static void abort_transmission(struct fhci_usb *usb)
+{
+	fhci_dbg(usb->fhci, "-> %s\n", __func__);
+	/* issue stop Tx command */
+	qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0);
+	/* flush Tx FIFOs */
+	out_8(&usb->fhci->regs->usb_uscom, USB_CMD_FLUSH_FIFO | EP_ZERO);
+	udelay(1000);
+	/* reset Tx BDs */
+	fhci_flush_bds(usb);
+	/* issue restart Tx command */
+	qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0);
+	fhci_dbg(usb->fhci, "<- %s\n", __func__);
+}
+
+irqreturn_t fhci_irq(struct usb_hcd *hcd)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	struct fhci_usb *usb;
+	u16 usb_er = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	usb = fhci->usb_lld;
+
+	usb_er |= in_be16(&usb->fhci->regs->usb_usber) &
+		  in_be16(&usb->fhci->regs->usb_usbmr);
+
+	/* clear event bits for next time */
+	out_be16(&usb->fhci->regs->usb_usber, usb_er);
+
+	fhci_dbg_isr(fhci, usb_er);
+
+	if (usb_er & USB_E_RESET_MASK) {
+		if ((usb->port_status == FHCI_PORT_FULL) ||
+				(usb->port_status == FHCI_PORT_LOW)) {
+			fhci_device_disconnected_interrupt(fhci);
+			usb_er &= ~USB_E_IDLE_MASK;
+		} else if (usb->port_status == FHCI_PORT_WAITING) {
+			usb->port_status = FHCI_PORT_DISCONNECTING;
+
+			/* Turn on IDLE since we want to disconnect */
+			usb->saved_msk |= USB_E_IDLE_MASK;
+			out_be16(&usb->fhci->regs->usb_usber,
+				 usb->saved_msk);
+		} else if (usb->port_status == FHCI_PORT_DISABLED) {
+			if (fhci_ioports_check_bus_state(fhci) == 1)
+				fhci_device_connected_interrupt(fhci);
+		}
+		usb_er &= ~USB_E_RESET_MASK;
+	}
+
+	if (usb_er & USB_E_MSF_MASK) {
+		abort_transmission(fhci->usb_lld);
+		usb_er &= ~USB_E_MSF_MASK;
+	}
+
+	if (usb_er & (USB_E_SOF_MASK | USB_E_SFT_MASK)) {
+		sof_interrupt(fhci);
+		usb_er &= ~(USB_E_SOF_MASK | USB_E_SFT_MASK);
+	}
+
+	if (usb_er & USB_E_TXB_MASK) {
+		fhci_tx_conf_interrupt(fhci->usb_lld);
+		usb_er &= ~USB_E_TXB_MASK;
+	}
+
+	if (usb_er & USB_E_TXE1_MASK) {
+		fhci_tx_conf_interrupt(fhci->usb_lld);
+		usb_er &= ~USB_E_TXE1_MASK;
+	}
+
+	if (usb_er & USB_E_IDLE_MASK) {
+		if (usb->port_status == FHCI_PORT_DISABLED) {
+			usb_er &= ~USB_E_RESET_MASK;
+			fhci_device_connected_interrupt(fhci);
+		} else if (usb->port_status ==
+				FHCI_PORT_DISCONNECTING) {
+			/* XXX usb->port_status = FHCI_PORT_WAITING; */
+			/* Disable IDLE */
+			usb->saved_msk &= ~USB_E_IDLE_MASK;
+			out_be16(&usb->fhci->regs->usb_usbmr,
+				 usb->saved_msk);
+		} else {
+			fhci_dbg_isr(fhci, -1);
+		}
+
+		usb_er &= ~USB_E_IDLE_MASK;
+	}
+
+	spin_unlock_irqrestore(&fhci->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+
+/*
+ * Process normal completions(error or success) and clean the schedule.
+ *
+ * This is the main path for handing urbs back to drivers. The only other patth
+ * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning
+ * the (re-reversed) done list as this does.
+ */
+static void process_done_list(unsigned long data)
+{
+	struct urb *urb;
+	struct ed *ed;
+	struct td *td;
+	struct urb_priv *urb_priv;
+	struct fhci_hcd *fhci = (struct fhci_hcd *)data;
+
+	disable_irq(fhci->timer->irq);
+	disable_irq(fhci_to_hcd(fhci)->irq);
+	spin_lock(&fhci->lock);
+
+	td = fhci_remove_td_from_done_list(fhci->hc_list);
+	while (td != NULL) {
+		urb = td->urb;
+		urb_priv = urb->hcpriv;
+		ed = td->ed;
+
+		/* update URB's length and status from TD */
+		fhci_done_td(urb, td);
+		urb_priv->tds_cnt++;
+
+		/*
+		 * if all this urb's TDs are done, call complete()
+		 * Interrupt transfers are the onley special case:
+		 * they are reissued,until "deleted" by usb_unlink_urb
+		 * (real work done in a SOF intr, by process_del_list)
+		 */
+		if (urb_priv->tds_cnt == urb_priv->num_of_tds) {
+			fhci_urb_complete_free(fhci, urb);
+		} else if (urb_priv->state == URB_DEL &&
+				ed->state == FHCI_ED_SKIP) {
+			fhci_del_ed_list(fhci, ed);
+			ed->state = FHCI_ED_OPER;
+		} else if (ed->state == FHCI_ED_HALTED) {
+			urb_priv->state = URB_DEL;
+			ed->state = FHCI_ED_URB_DEL;
+			fhci_del_ed_list(fhci, ed);
+			ed->state = FHCI_ED_OPER;
+		}
+
+		td = fhci_remove_td_from_done_list(fhci->hc_list);
+	}
+
+	spin_unlock(&fhci->lock);
+	enable_irq(fhci->timer->irq);
+	enable_irq(fhci_to_hcd(fhci)->irq);
+}
+
+DECLARE_TASKLET_OLD(fhci_tasklet, process_done_list);
+
+/* transfer complted callback */
+u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci)
+{
+	if (!fhci->process_done_task->state)
+		tasklet_schedule(fhci->process_done_task);
+	return 0;
+}
+
+/*
+ * adds urb to the endpoint descriptor list
+ * arguments:
+ * fhci		data structure for the Low level host controller
+ * ep		USB Host endpoint data structure
+ * urb		USB request block data structure
+ */
+void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb)
+{
+	struct ed *ed = urb->ep->hcpriv;
+	struct urb_priv *urb_priv = urb->hcpriv;
+	u32 data_len = urb->transfer_buffer_length;
+	int urb_state = 0;
+	int toggle = 0;
+	u8 *data;
+	u16 cnt = 0;
+
+	if (ed == NULL) {
+		ed = fhci_get_empty_ed(fhci);
+		ed->dev_addr = usb_pipedevice(urb->pipe);
+		ed->ep_addr = usb_pipeendpoint(urb->pipe);
+		switch (usb_pipetype(urb->pipe)) {
+		case PIPE_CONTROL:
+			ed->mode = FHCI_TF_CTRL;
+			break;
+		case PIPE_BULK:
+			ed->mode = FHCI_TF_BULK;
+			break;
+		case PIPE_INTERRUPT:
+			ed->mode = FHCI_TF_INTR;
+			break;
+		case PIPE_ISOCHRONOUS:
+			ed->mode = FHCI_TF_ISO;
+			break;
+		default:
+			break;
+		}
+		ed->speed = (urb->dev->speed == USB_SPEED_LOW) ?
+			FHCI_LOW_SPEED : FHCI_FULL_SPEED;
+		ed->max_pkt_size = usb_endpoint_maxp(&urb->ep->desc);
+		urb->ep->hcpriv = ed;
+		fhci_dbg(fhci, "new ep speed=%d max_pkt_size=%d\n",
+			 ed->speed, ed->max_pkt_size);
+	}
+
+	/* for ISO transfer calculate start frame index */
+	if (ed->mode == FHCI_TF_ISO) {
+		/* Ignore the possibility of underruns */
+		urb->start_frame = ed->td_head ? ed->next_iso :
+						 get_frame_num(fhci);
+		ed->next_iso = (urb->start_frame + urb->interval *
+				urb->number_of_packets) & 0x07ff;
+	}
+
+	/*
+	 * OHCI handles the DATA toggle itself,we just use the USB
+	 * toggle bits
+	 */
+	if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			  usb_pipeout(urb->pipe)))
+		toggle = USB_TD_TOGGLE_CARRY;
+	else {
+		toggle = USB_TD_TOGGLE_DATA0;
+		usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			      usb_pipeout(urb->pipe), 1);
+	}
+
+	urb_priv->tds_cnt = 0;
+	urb_priv->ed = ed;
+	if (data_len > 0)
+		data = urb->transfer_buffer;
+	else
+		data = NULL;
+
+	switch (ed->mode) {
+	case FHCI_TF_BULK:
+		if (urb->transfer_flags & URB_ZERO_PACKET &&
+				urb->transfer_buffer_length > 0 &&
+				((urb->transfer_buffer_length %
+				usb_endpoint_maxp(&urb->ep->desc)) == 0))
+			urb_state = US_BULK0;
+		while (data_len > 4096) {
+			fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+							 FHCI_TA_IN,
+				cnt ? USB_TD_TOGGLE_CARRY :
+				      toggle,
+				data, 4096, 0, 0, true);
+			data += 4096;
+			data_len -= 4096;
+			cnt++;
+		}
+
+		fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+			usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN,
+			cnt ? USB_TD_TOGGLE_CARRY : toggle,
+			data, data_len, 0, 0, true);
+		cnt++;
+
+		if (urb->transfer_flags & URB_ZERO_PACKET &&
+				cnt < urb_priv->num_of_tds) {
+			fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+							 FHCI_TA_IN,
+				USB_TD_TOGGLE_CARRY, NULL, 0, 0, 0, true);
+			cnt++;
+		}
+		break;
+	case FHCI_TF_INTR:
+		urb->start_frame = get_frame_num(fhci) + 1;
+		fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+			usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN,
+			USB_TD_TOGGLE_DATA0, data, data_len,
+			urb->interval, urb->start_frame, true);
+		break;
+	case FHCI_TF_CTRL:
+		ed->dev_addr = usb_pipedevice(urb->pipe);
+		ed->max_pkt_size = usb_endpoint_maxp(&urb->ep->desc);
+
+		/* setup stage */
+		fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, FHCI_TA_SETUP,
+			USB_TD_TOGGLE_DATA0, urb->setup_packet, 8, 0, 0, true);
+
+		/* data stage */
+		if (data_len > 0) {
+			fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+							 FHCI_TA_IN,
+				USB_TD_TOGGLE_DATA1, data, data_len, 0, 0,
+				true);
+		}
+
+		/* status stage */
+		if (data_len > 0)
+			fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+				(usb_pipeout(urb->pipe) ? FHCI_TA_IN :
+							  FHCI_TA_OUT),
+				USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+		else
+			 fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+				FHCI_TA_IN,
+				USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+
+		urb_state = US_CTRL_SETUP;
+		break;
+	case FHCI_TF_ISO:
+		for (cnt = 0; cnt < urb->number_of_packets; cnt++) {
+			u16 frame = urb->start_frame;
+
+			/*
+			 * FIXME scheduling should handle frame counter
+			 * roll-around ... exotic case (and OHCI has
+			 * a 2^16 iso range, vs other HCs max of 2^10)
+			 */
+			frame += cnt * urb->interval;
+			frame &= 0x07ff;
+			fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+							 FHCI_TA_IN,
+				USB_TD_TOGGLE_DATA0,
+				data + urb->iso_frame_desc[cnt].offset,
+				urb->iso_frame_desc[cnt].length,
+				urb->interval, frame, true);
+		}
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * set the state of URB
+	 * control pipe:3 states -- setup,data,status
+	 * interrupt and bulk pipe:1 state -- data
+	 */
+	urb->pipe &= ~0x1f;
+	urb->pipe |= urb_state & 0x1f;
+
+	urb_priv->state = URB_INPROGRESS;
+
+	if (!ed->td_head) {
+		ed->state = FHCI_ED_OPER;
+		switch (ed->mode) {
+		case FHCI_TF_CTRL:
+			list_add(&ed->node, &fhci->hc_list->ctrl_list);
+			break;
+		case FHCI_TF_BULK:
+			list_add(&ed->node, &fhci->hc_list->bulk_list);
+			break;
+		case FHCI_TF_INTR:
+			list_add(&ed->node, &fhci->hc_list->intr_list);
+			break;
+		case FHCI_TF_ISO:
+			list_add(&ed->node, &fhci->hc_list->iso_list);
+			break;
+		default:
+			break;
+		}
+	}
+
+	fhci_add_tds_to_ed(ed, urb_priv->tds, urb_priv->num_of_tds);
+	fhci->active_urbs++;
+}
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
new file mode 100644
index 000000000..d98fd9e1a
--- /dev/null
+++ b/drivers/usb/host/fhci-tds.c
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include "fhci.h"
+
+#define DUMMY_BD_BUFFER  0xdeadbeef
+#define DUMMY2_BD_BUFFER 0xbaadf00d
+
+/* Transaction Descriptors bits */
+#define TD_R		0x8000 /* ready bit */
+#define TD_W		0x2000 /* wrap bit */
+#define TD_I		0x1000 /* interrupt on completion */
+#define TD_L		0x0800 /* last */
+#define TD_TC		0x0400 /* transmit CRC */
+#define TD_CNF		0x0200 /* CNF - Must be always 1 */
+#define TD_LSP		0x0100 /* Low-speed transaction */
+#define TD_PID		0x00c0 /* packet id */
+#define TD_RXER		0x0020 /* Rx error or not */
+
+#define TD_NAK		0x0010 /* No ack. */
+#define TD_STAL		0x0008 /* Stall received */
+#define TD_TO		0x0004 /* time out */
+#define TD_UN		0x0002 /* underrun */
+#define TD_NO		0x0010 /* Rx Non Octet Aligned Packet */
+#define TD_AB		0x0008 /* Frame Aborted */
+#define TD_CR		0x0004 /* CRC Error */
+#define TD_OV		0x0002 /* Overrun */
+#define TD_BOV		0x0001 /* Buffer Overrun */
+
+#define TD_ERRORS	(TD_NAK | TD_STAL | TD_TO | TD_UN | \
+			 TD_NO | TD_AB | TD_CR | TD_OV | TD_BOV)
+
+#define TD_PID_DATA0	0x0080 /* Data 0 toggle */
+#define TD_PID_DATA1	0x00c0 /* Data 1 toggle */
+#define TD_PID_TOGGLE	0x00c0 /* Data 0/1 toggle mask */
+
+#define TD_TOK_SETUP	0x0000
+#define TD_TOK_OUT	0x4000
+#define TD_TOK_IN	0x8000
+#define TD_ISO		0x1000
+#define TD_ENDP		0x0780
+#define TD_ADDR		0x007f
+
+#define TD_ENDP_SHIFT 7
+
+struct usb_td {
+	__be16 status;
+	__be16 length;
+	__be32 buf_ptr;
+	__be16 extra;
+	__be16 reserved;
+};
+
+static struct usb_td __iomem *next_bd(struct usb_td __iomem *base,
+				      struct usb_td __iomem *td,
+				      u16 status)
+{
+	if (status & TD_W)
+		return base;
+	else
+		return ++td;
+}
+
+void fhci_push_dummy_bd(struct endpoint *ep)
+{
+	if (!ep->already_pushed_dummy_bd) {
+		u16 td_status = in_be16(&ep->empty_td->status);
+
+		out_be32(&ep->empty_td->buf_ptr, DUMMY_BD_BUFFER);
+		/* get the next TD in the ring */
+		ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status);
+		ep->already_pushed_dummy_bd = true;
+	}
+}
+
+/* destroy an USB endpoint */
+void fhci_ep0_free(struct fhci_usb *usb)
+{
+	struct endpoint *ep;
+	int size;
+
+	ep = usb->ep0;
+	if (ep) {
+		if (ep->td_base)
+			cpm_muram_free(cpm_muram_offset(ep->td_base));
+
+		if (kfifo_initialized(&ep->conf_frame_Q)) {
+			size = cq_howmany(&ep->conf_frame_Q);
+			for (; size; size--) {
+				struct packet *pkt = cq_get(&ep->conf_frame_Q);
+
+				kfree(pkt);
+			}
+			cq_delete(&ep->conf_frame_Q);
+		}
+
+		if (kfifo_initialized(&ep->empty_frame_Q)) {
+			size = cq_howmany(&ep->empty_frame_Q);
+			for (; size; size--) {
+				struct packet *pkt = cq_get(&ep->empty_frame_Q);
+
+				kfree(pkt);
+			}
+			cq_delete(&ep->empty_frame_Q);
+		}
+
+		if (kfifo_initialized(&ep->dummy_packets_Q)) {
+			size = cq_howmany(&ep->dummy_packets_Q);
+			for (; size; size--) {
+				u8 *buff = cq_get(&ep->dummy_packets_Q);
+
+				kfree(buff);
+			}
+			cq_delete(&ep->dummy_packets_Q);
+		}
+
+		kfree(ep);
+		usb->ep0 = NULL;
+	}
+}
+
+/*
+ * create the endpoint structure
+ *
+ * arguments:
+ * usb		A pointer to the data structure of the USB
+ * data_mem	The data memory partition(BUS)
+ * ring_len	TD ring length
+ */
+u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
+			   u32 ring_len)
+{
+	struct endpoint *ep;
+	struct usb_td __iomem *td;
+	unsigned long ep_offset;
+	char *err_for = "endpoint PRAM";
+	int ep_mem_size;
+	u32 i;
+
+	/* we need at least 3 TDs in the ring */
+	if (!(ring_len > 2)) {
+		fhci_err(usb->fhci, "illegal TD ring length parameters\n");
+		return -EINVAL;
+	}
+
+	ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+	if (!ep)
+		return -ENOMEM;
+
+	ep_mem_size = ring_len * sizeof(*td) + sizeof(struct fhci_ep_pram);
+	ep_offset = cpm_muram_alloc(ep_mem_size, 32);
+	if (IS_ERR_VALUE(ep_offset))
+		goto err;
+	ep->td_base = cpm_muram_addr(ep_offset);
+
+	/* zero all queue pointers */
+	if (cq_new(&ep->conf_frame_Q, ring_len + 2) ||
+	    cq_new(&ep->empty_frame_Q, ring_len + 2) ||
+	    cq_new(&ep->dummy_packets_Q, ring_len + 2)) {
+		err_for = "frame_queues";
+		goto err;
+	}
+
+	for (i = 0; i < (ring_len + 1); i++) {
+		struct packet *pkt;
+		u8 *buff;
+
+		pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
+		if (!pkt) {
+			err_for = "frame";
+			goto err;
+		}
+
+		buff = kmalloc_array(1028, sizeof(*buff), GFP_KERNEL);
+		if (!buff) {
+			kfree(pkt);
+			err_for = "buffer";
+			goto err;
+		}
+		cq_put(&ep->empty_frame_Q, pkt);
+		cq_put(&ep->dummy_packets_Q, buff);
+	}
+
+	/* we put the endpoint parameter RAM right behind the TD ring */
+	ep->ep_pram_ptr = (void __iomem *)ep->td_base + sizeof(*td) * ring_len;
+
+	ep->conf_td = ep->td_base;
+	ep->empty_td = ep->td_base;
+
+	ep->already_pushed_dummy_bd = false;
+
+	/* initialize tds */
+	td = ep->td_base;
+	for (i = 0; i < ring_len; i++) {
+		out_be32(&td->buf_ptr, 0);
+		out_be16(&td->status, 0);
+		out_be16(&td->length, 0);
+		out_be16(&td->extra, 0);
+		td++;
+	}
+	td--;
+	out_be16(&td->status, TD_W); /* for last TD set Wrap bit */
+	out_be16(&td->length, 0);
+
+	/* endpoint structure has been created */
+	usb->ep0 = ep;
+
+	return 0;
+err:
+	fhci_ep0_free(usb);
+	kfree(ep);
+	fhci_err(usb->fhci, "no memory for the %s\n", err_for);
+	return -ENOMEM;
+}
+
+/*
+ * initialize the endpoint register according to the given parameters
+ *
+ * artuments:
+ * usb		A pointer to the data strucutre of the USB
+ * ep		A pointer to the endpoint structre
+ * data_mem	The data memory partition(BUS)
+ */
+void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
+			    enum fhci_mem_alloc data_mem)
+{
+	u8 rt;
+
+	/* set the endpoint registers according to the endpoint */
+	out_be16(&usb->fhci->regs->usb_usep[0],
+		 USB_TRANS_CTR | USB_EP_MF | USB_EP_RTE);
+	out_be16(&usb->fhci->pram->ep_ptr[0],
+		 cpm_muram_offset(ep->ep_pram_ptr));
+
+	rt = (BUS_MODE_BO_BE | BUS_MODE_GBL);
+#ifdef MULTI_DATA_BUS
+	if (data_mem == MEM_SECONDARY)
+		rt |= BUS_MODE_DTB;
+#endif
+	out_8(&ep->ep_pram_ptr->rx_func_code, rt);
+	out_8(&ep->ep_pram_ptr->tx_func_code, rt);
+	out_be16(&ep->ep_pram_ptr->rx_buff_len, 1028);
+	out_be16(&ep->ep_pram_ptr->rx_base, 0);
+	out_be16(&ep->ep_pram_ptr->tx_base, cpm_muram_offset(ep->td_base));
+	out_be16(&ep->ep_pram_ptr->rx_bd_ptr, 0);
+	out_be16(&ep->ep_pram_ptr->tx_bd_ptr, cpm_muram_offset(ep->td_base));
+	out_be32(&ep->ep_pram_ptr->tx_state, 0);
+}
+
+/*
+ * Collect the submitted frames and inform the application about them
+ * It is also preparing the TDs for new frames. If the Tx interrupts
+ * are disabled, the application should call that routine to get
+ * confirmation about the submitted frames. Otherwise, the routine is
+ * called from the interrupt service routine during the Tx interrupt.
+ * In that case the application is informed by calling the application
+ * specific 'fhci_transaction_confirm' routine
+ */
+static void fhci_td_transaction_confirm(struct fhci_usb *usb)
+{
+	struct endpoint *ep = usb->ep0;
+	struct packet *pkt;
+	struct usb_td __iomem *td;
+	u16 extra_data;
+	u16 td_status;
+	u16 td_length;
+	u32 buf;
+
+	/*
+	 * collect transmitted BDs from the chip. The routine clears all BDs
+	 * with R bit = 0 and the pointer to data buffer is not NULL, that is
+	 * BDs which point to the transmitted data buffer
+	 */
+	while (1) {
+		td = ep->conf_td;
+		td_status = in_be16(&td->status);
+		td_length = in_be16(&td->length);
+		buf = in_be32(&td->buf_ptr);
+		extra_data = in_be16(&td->extra);
+
+		/* check if the TD is empty */
+		if (!(!(td_status & TD_R) && ((td_status & ~TD_W) || buf)))
+			break;
+		/* check if it is a dummy buffer */
+		else if ((buf == DUMMY_BD_BUFFER) && !(td_status & ~TD_W))
+			break;
+
+		/* mark TD as empty */
+		clrbits16(&td->status, ~TD_W);
+		out_be16(&td->length, 0);
+		out_be32(&td->buf_ptr, 0);
+		out_be16(&td->extra, 0);
+		/* advance the TD pointer */
+		ep->conf_td = next_bd(ep->td_base, ep->conf_td, td_status);
+
+		/* check if it is a dummy buffer(type2) */
+		if ((buf == DUMMY2_BD_BUFFER) && !(td_status & ~TD_W))
+			continue;
+
+		pkt = cq_get(&ep->conf_frame_Q);
+		if (!pkt)
+			fhci_err(usb->fhci, "no frame to confirm\n");
+
+		if (td_status & TD_ERRORS) {
+			if (td_status & TD_RXER) {
+				if (td_status & TD_CR)
+					pkt->status = USB_TD_RX_ER_CRC;
+				else if (td_status & TD_AB)
+					pkt->status = USB_TD_RX_ER_BITSTUFF;
+				else if (td_status & TD_OV)
+					pkt->status = USB_TD_RX_ER_OVERUN;
+				else if (td_status & TD_BOV)
+					pkt->status = USB_TD_RX_DATA_OVERUN;
+				else if (td_status & TD_NO)
+					pkt->status = USB_TD_RX_ER_NONOCT;
+				else
+					fhci_err(usb->fhci, "illegal error "
+						 "occurred\n");
+			} else if (td_status & TD_NAK)
+				pkt->status = USB_TD_TX_ER_NAK;
+			else if (td_status & TD_TO)
+				pkt->status = USB_TD_TX_ER_TIMEOUT;
+			else if (td_status & TD_UN)
+				pkt->status = USB_TD_TX_ER_UNDERUN;
+			else if (td_status & TD_STAL)
+				pkt->status = USB_TD_TX_ER_STALL;
+			else
+				fhci_err(usb->fhci, "illegal error occurred\n");
+		} else if ((extra_data & TD_TOK_IN) &&
+				pkt->len > td_length - CRC_SIZE) {
+			pkt->status = USB_TD_RX_DATA_UNDERUN;
+		}
+
+		if (extra_data & TD_TOK_IN)
+			pkt->len = td_length - CRC_SIZE;
+		else if (pkt->info & PKT_ZLP)
+			pkt->len = 0;
+		else
+			pkt->len = td_length;
+
+		fhci_transaction_confirm(usb, pkt);
+	}
+}
+
+/*
+ * Submitting a data frame to a specified endpoint of a USB device
+ * The frame is put in the driver's transmit queue for this endpoint
+ *
+ * Arguments:
+ * usb          A pointer to the USB structure
+ * pkt          A pointer to the user frame structure
+ * trans_type   Transaction tyep - IN,OUT or SETUP
+ * dest_addr    Device address - 0~127
+ * dest_ep      Endpoint number of the device - 0~16
+ * trans_mode   Pipe type - ISO,Interrupt,bulk or control
+ * dest_speed   USB speed - Low speed or FULL speed
+ * data_toggle  Data sequence toggle - 0 or 1
+ */
+u32 fhci_host_transaction(struct fhci_usb *usb,
+			  struct packet *pkt,
+			  enum fhci_ta_type trans_type,
+			  u8 dest_addr,
+			  u8 dest_ep,
+			  enum fhci_tf_mode trans_mode,
+			  enum fhci_speed dest_speed, u8 data_toggle)
+{
+	struct endpoint *ep = usb->ep0;
+	struct usb_td __iomem *td;
+	u16 extra_data;
+	u16 td_status;
+
+	fhci_usb_disable_interrupt(usb);
+	/* start from the next BD that should be filled */
+	td = ep->empty_td;
+	td_status = in_be16(&td->status);
+
+	if (td_status & TD_R && in_be16(&td->length)) {
+		/* if the TD is not free */
+		fhci_usb_enable_interrupt(usb);
+		return -1;
+	}
+
+	/* get the next TD in the ring */
+	ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status);
+	fhci_usb_enable_interrupt(usb);
+	pkt->priv_data = td;
+	out_be32(&td->buf_ptr, virt_to_phys(pkt->data));
+	/* sets up transaction parameters - addr,endp,dir,and type */
+	extra_data = (dest_ep << TD_ENDP_SHIFT) | dest_addr;
+	switch (trans_type) {
+	case FHCI_TA_IN:
+		extra_data |= TD_TOK_IN;
+		break;
+	case FHCI_TA_OUT:
+		extra_data |= TD_TOK_OUT;
+		break;
+	case FHCI_TA_SETUP:
+		extra_data |= TD_TOK_SETUP;
+		break;
+	}
+	if (trans_mode == FHCI_TF_ISO)
+		extra_data |= TD_ISO;
+	out_be16(&td->extra, extra_data);
+
+	/* sets up the buffer descriptor */
+	td_status = ((td_status & TD_W) | TD_R | TD_L | TD_I | TD_CNF);
+	if (!(pkt->info & PKT_NO_CRC))
+		td_status |= TD_TC;
+
+	switch (trans_type) {
+	case FHCI_TA_IN:
+		if (data_toggle)
+			pkt->info |= PKT_PID_DATA1;
+		else
+			pkt->info |= PKT_PID_DATA0;
+		break;
+	default:
+		if (data_toggle) {
+			td_status |= TD_PID_DATA1;
+			pkt->info |= PKT_PID_DATA1;
+		} else {
+			td_status |= TD_PID_DATA0;
+			pkt->info |= PKT_PID_DATA0;
+		}
+		break;
+	}
+
+	if ((dest_speed == FHCI_LOW_SPEED) &&
+	    (usb->port_status == FHCI_PORT_FULL))
+		td_status |= TD_LSP;
+
+	out_be16(&td->status, td_status);
+
+	/* set up buffer length */
+	if (trans_type == FHCI_TA_IN)
+		out_be16(&td->length, pkt->len + CRC_SIZE);
+	else
+		out_be16(&td->length, pkt->len);
+
+	/* put the frame to the confirmation queue */
+	cq_put(&ep->conf_frame_Q, pkt);
+
+	if (cq_howmany(&ep->conf_frame_Q) == 1)
+		out_8(&usb->fhci->regs->usb_uscom, USB_CMD_STR_FIFO);
+
+	return 0;
+}
+
+/* Reset the Tx BD ring */
+void fhci_flush_bds(struct fhci_usb *usb)
+{
+	u16 td_status;
+	struct usb_td __iomem *td;
+	struct endpoint *ep = usb->ep0;
+
+	td = ep->td_base;
+	while (1) {
+		td_status = in_be16(&td->status);
+		in_be32(&td->buf_ptr);
+		in_be16(&td->extra);
+
+		/* if the TD is not empty - we'll confirm it as Timeout */
+		if (td_status & TD_R)
+			out_be16(&td->status, (td_status & ~TD_R) | TD_TO);
+		/* if this TD is dummy - let's skip this TD */
+		else if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER)
+			out_be32(&td->buf_ptr, DUMMY2_BD_BUFFER);
+		/* if this is the last TD - break */
+		if (td_status & TD_W)
+			break;
+
+		td++;
+	}
+
+	fhci_td_transaction_confirm(usb);
+
+	td = ep->td_base;
+	do {
+		out_be16(&td->status, 0);
+		out_be16(&td->length, 0);
+		out_be32(&td->buf_ptr, 0);
+		out_be16(&td->extra, 0);
+		td++;
+	} while (!(in_be16(&td->status) & TD_W));
+	out_be16(&td->status, TD_W); /* for last TD set Wrap bit */
+	out_be16(&td->length, 0);
+	out_be32(&td->buf_ptr, 0);
+	out_be16(&td->extra, 0);
+
+	out_be16(&ep->ep_pram_ptr->tx_bd_ptr,
+		 in_be16(&ep->ep_pram_ptr->tx_base));
+	out_be32(&ep->ep_pram_ptr->tx_state, 0);
+	out_be16(&ep->ep_pram_ptr->tx_cnt, 0);
+	ep->empty_td = ep->td_base;
+	ep->conf_td = ep->td_base;
+}
+
+/*
+ * Flush all transmitted packets from TDs in the actual frame.
+ * This routine is called when something wrong with the controller and
+ * we want to get rid of the actual frame and start again next frame
+ */
+void fhci_flush_actual_frame(struct fhci_usb *usb)
+{
+	u8 mode;
+	u16 tb_ptr;
+	u16 td_status;
+	u32 buf_ptr;
+	struct usb_td __iomem *td;
+	struct endpoint *ep = usb->ep0;
+
+	/* disable the USB controller */
+	mode = in_8(&usb->fhci->regs->usb_usmod);
+	out_8(&usb->fhci->regs->usb_usmod, mode & ~USB_MODE_EN);
+
+	tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr);
+	td = cpm_muram_addr(tb_ptr);
+	td_status = in_be16(&td->status);
+	buf_ptr = in_be32(&td->buf_ptr);
+	in_be16(&td->extra);
+	do {
+		if (td_status & TD_R) {
+			out_be16(&td->status, (td_status & ~TD_R) | TD_TO);
+		} else {
+			out_be32(&td->buf_ptr, 0);
+			ep->already_pushed_dummy_bd = false;
+			break;
+		}
+
+		/* advance the TD pointer */
+		td = next_bd(ep->td_base, td, td_status);
+		td_status = in_be16(&td->status);
+		buf_ptr = in_be32(&td->buf_ptr);
+		in_be16(&td->extra);
+	} while ((td_status & TD_R) || buf_ptr);
+
+	fhci_td_transaction_confirm(usb);
+
+	out_be16(&ep->ep_pram_ptr->tx_bd_ptr,
+		 in_be16(&ep->ep_pram_ptr->tx_base));
+	out_be32(&ep->ep_pram_ptr->tx_state, 0);
+	out_be16(&ep->ep_pram_ptr->tx_cnt, 0);
+	ep->empty_td = ep->td_base;
+	ep->conf_td = ep->td_base;
+
+	usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION;
+
+	/* reset the event register */
+	out_be16(&usb->fhci->regs->usb_usber, 0xffff);
+	/* enable the USB controller */
+	out_8(&usb->fhci->regs->usb_usmod, mode | USB_MODE_EN);
+}
+
+/* handles Tx confirm and Tx error interrupt */
+void fhci_tx_conf_interrupt(struct fhci_usb *usb)
+{
+	fhci_td_transaction_confirm(usb);
+
+	/*
+	 * Schedule another transaction to this frame only if we have
+	 * already confirmed all transaction in the frame.
+	 */
+	if (((fhci_get_sof_timer_count(usb) < usb->max_frame_usage) ||
+	     (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)) &&
+	    (list_empty(&usb->actual_frame->tds_list)))
+		fhci_schedule_transactions(usb);
+}
+
+void fhci_host_transmit_actual_frame(struct fhci_usb *usb)
+{
+	u16 tb_ptr;
+	u16 td_status;
+	struct usb_td __iomem *td;
+	struct endpoint *ep = usb->ep0;
+
+	tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr);
+	td = cpm_muram_addr(tb_ptr);
+
+	if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) {
+		struct usb_td __iomem *old_td = td;
+
+		ep->already_pushed_dummy_bd = false;
+		td_status = in_be16(&td->status);
+		/* gets the next TD in the ring */
+		td = next_bd(ep->td_base, td, td_status);
+		tb_ptr = cpm_muram_offset(td);
+		out_be16(&ep->ep_pram_ptr->tx_bd_ptr, tb_ptr);
+
+		/* start transmit only if we have something in the TDs */
+		if (in_be16(&td->status) & TD_R)
+			out_8(&usb->fhci->regs->usb_uscom, USB_CMD_STR_FIFO);
+
+		if (in_be32(&ep->conf_td->buf_ptr) == DUMMY_BD_BUFFER) {
+			out_be32(&old_td->buf_ptr, 0);
+			ep->conf_td = next_bd(ep->td_base, ep->conf_td,
+					      td_status);
+		} else {
+			out_be32(&old_td->buf_ptr, DUMMY2_BD_BUFFER);
+		}
+	}
+}
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
new file mode 100644
index 000000000..1f57b0989
--- /dev/null
+++ b/drivers/usb/host/fhci.h
@@ -0,0 +1,588 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ */
+
+#ifndef __FHCI_H
+#define __FHCI_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/bug.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/kfifo.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/gpio/consumer.h>
+#include <soc/fsl/qe/qe.h>
+#include <soc/fsl/qe/immap_qe.h>
+
+#define USB_CLOCK	48000000
+
+#define FHCI_PRAM_SIZE 0x100
+
+#define MAX_EDS		32
+#define MAX_TDS		32
+
+
+/* CRC16 field size */
+#define CRC_SIZE 2
+
+/* USB protocol overhead for each frame transmitted from the host */
+#define PROTOCOL_OVERHEAD 7
+
+/* Packet structure, info field */
+#define PKT_PID_DATA0		0x80000000 /* PID - Data toggle zero */
+#define PKT_PID_DATA1		0x40000000 /* PID - Data toggle one  */
+#define PKT_PID_SETUP		0x20000000 /* PID - Setup bit */
+#define PKT_SETUP_STATUS	0x10000000 /* Setup status bit */
+#define PKT_SETADDR_STATUS	0x08000000 /* Set address status bit */
+#define PKT_SET_HOST_LAST	0x04000000 /* Last data packet */
+#define PKT_HOST_DATA		0x02000000 /* Data packet */
+#define PKT_FIRST_IN_FRAME	0x01000000 /* First packet in the frame */
+#define PKT_TOKEN_FRAME		0x00800000 /* Token packet */
+#define PKT_ZLP			0x00400000 /* Zero length packet */
+#define PKT_IN_TOKEN_FRAME	0x00200000 /* IN token packet */
+#define PKT_OUT_TOKEN_FRAME	0x00100000 /* OUT token packet */
+#define PKT_SETUP_TOKEN_FRAME	0x00080000 /* SETUP token packet */
+#define PKT_STALL_FRAME		0x00040000 /* STALL packet */
+#define PKT_NACK_FRAME		0x00020000 /* NACK packet */
+#define PKT_NO_PID		0x00010000 /* No PID */
+#define PKT_NO_CRC		0x00008000 /* don't append CRC */
+#define PKT_HOST_COMMAND	0x00004000 /* Host command packet */
+#define PKT_DUMMY_PACKET	0x00002000 /* Dummy packet, used for mmm */
+#define PKT_LOW_SPEED_PACKET	0x00001000 /* Low-Speed packet */
+
+#define TRANS_OK		(0)
+#define TRANS_INPROGRESS	(-1)
+#define TRANS_DISCARD		(-2)
+#define TRANS_FAIL		(-3)
+
+#define PS_INT		0
+#define PS_DISCONNECTED	1
+#define PS_CONNECTED	2
+#define PS_READY	3
+#define PS_MISSING	4
+
+/* Transfer Descriptor status field */
+#define USB_TD_OK		0x00000000 /* TD transmited or received ok */
+#define USB_TD_INPROGRESS	0x80000000 /* TD is being transmitted */
+#define USB_TD_RX_ER_NONOCT	0x40000000 /* Tx Non Octet Aligned Packet */
+#define USB_TD_RX_ER_BITSTUFF	0x20000000 /* Frame Aborted-Received pkt */
+#define USB_TD_RX_ER_CRC	0x10000000 /* CRC error */
+#define USB_TD_RX_ER_OVERUN	0x08000000 /* Over - run occurred */
+#define USB_TD_RX_ER_PID	0x04000000 /* wrong PID received */
+#define USB_TD_RX_DATA_UNDERUN	0x02000000 /* shorter than expected */
+#define USB_TD_RX_DATA_OVERUN	0x01000000 /* longer than expected */
+#define USB_TD_TX_ER_NAK	0x00800000 /* NAK handshake */
+#define USB_TD_TX_ER_STALL	0x00400000 /* STALL handshake */
+#define USB_TD_TX_ER_TIMEOUT	0x00200000 /* transmit time out */
+#define USB_TD_TX_ER_UNDERUN	0x00100000 /* transmit underrun */
+
+#define USB_TD_ERROR (USB_TD_RX_ER_NONOCT | USB_TD_RX_ER_BITSTUFF | \
+		USB_TD_RX_ER_CRC | USB_TD_RX_ER_OVERUN | USB_TD_RX_ER_PID | \
+		USB_TD_RX_DATA_UNDERUN | USB_TD_RX_DATA_OVERUN | \
+		USB_TD_TX_ER_NAK | USB_TD_TX_ER_STALL | \
+		USB_TD_TX_ER_TIMEOUT | USB_TD_TX_ER_UNDERUN)
+
+/* Transfer Descriptor toggle field */
+#define USB_TD_TOGGLE_DATA0	0
+#define USB_TD_TOGGLE_DATA1	1
+#define USB_TD_TOGGLE_CARRY	2
+
+/* #define MULTI_DATA_BUS */
+
+/* Bus mode register RBMR/TBMR */
+#define BUS_MODE_GBL	0x20	/* Global snooping */
+#define BUS_MODE_BO	0x18	/* Byte ordering */
+#define BUS_MODE_BO_BE	0x10	/* Byte ordering - Big-endian */
+#define BUS_MODE_DTB	0x02	/* Data bus */
+
+/* FHCI QE USB Register Description */
+
+/* USB Mode Register bit define */
+#define USB_MODE_EN		0x01
+#define USB_MODE_HOST		0x02
+#define USB_MODE_TEST		0x04
+#define USB_MODE_SFTE		0x08
+#define USB_MODE_RESUME		0x40
+#define USB_MODE_LSS		0x80
+
+/* USB Slave Address Register Mask */
+#define USB_SLVADDR_MASK	0x7F
+
+/* USB Endpoint register define */
+#define USB_EPNUM_MASK		0xF000
+#define USB_EPNUM_SHIFT		12
+
+#define USB_TRANS_MODE_SHIFT	8
+#define USB_TRANS_CTR		0x0000
+#define USB_TRANS_INT		0x0100
+#define USB_TRANS_BULK		0x0200
+#define USB_TRANS_ISO		0x0300
+
+#define USB_EP_MF		0x0020
+#define USB_EP_RTE		0x0010
+
+#define USB_THS_SHIFT		2
+#define USB_THS_MASK		0x000c
+#define USB_THS_NORMAL		0x0
+#define USB_THS_IGNORE_IN	0x0004
+#define USB_THS_NACK		0x0008
+#define USB_THS_STALL		0x000c
+
+#define USB_RHS_SHIFT   	0
+#define USB_RHS_MASK		0x0003
+#define USB_RHS_NORMAL  	0x0
+#define USB_RHS_IGNORE_OUT	0x0001
+#define USB_RHS_NACK		0x0002
+#define USB_RHS_STALL		0x0003
+
+#define USB_RTHS_MASK		0x000f
+
+/* USB Command Register define */
+#define USB_CMD_STR_FIFO	0x80
+#define USB_CMD_FLUSH_FIFO	0x40
+#define USB_CMD_ISFT		0x20
+#define USB_CMD_DSFT		0x10
+#define USB_CMD_EP_MASK		0x03
+
+/* USB Event and Mask Register define */
+#define USB_E_MSF_MASK		0x0800
+#define USB_E_SFT_MASK		0x0400
+#define USB_E_RESET_MASK	0x0200
+#define USB_E_IDLE_MASK		0x0100
+#define USB_E_TXE4_MASK		0x0080
+#define USB_E_TXE3_MASK		0x0040
+#define USB_E_TXE2_MASK		0x0020
+#define USB_E_TXE1_MASK		0x0010
+#define USB_E_SOF_MASK		0x0008
+#define USB_E_BSY_MASK		0x0004
+#define USB_E_TXB_MASK		0x0002
+#define USB_E_RXB_MASK		0x0001
+
+/* Freescale USB HOST */
+struct fhci_pram {
+	__be16 ep_ptr[4];	/* Endpoint porter reg */
+	__be32 rx_state;	/* Rx internal state */
+	__be32 rx_ptr;		/* Rx internal data pointer */
+	__be16 frame_num;	/* Frame number */
+	__be16 rx_cnt;		/* Rx byte count */
+	__be32 rx_temp;		/* Rx temp */
+	__be32 rx_data_temp;	/* Rx data temp */
+	__be16 rx_u_ptr;	/* Rx microcode return address temp */
+	u8 reserved1[2];	/* reserved area */
+	__be32 sof_tbl;		/* SOF lookup table pointer */
+	u8 sof_u_crc_temp;	/* SOF micorcode CRC5 temp reg */
+	u8 reserved2[0xdb];
+};
+
+/* Freescale USB Endpoint*/
+struct fhci_ep_pram {
+	__be16 rx_base;		/* Rx BD base address */
+	__be16 tx_base;		/* Tx BD base address */
+	u8 rx_func_code;	/* Rx function code */
+	u8 tx_func_code;	/* Tx function code */
+	__be16 rx_buff_len;	/* Rx buffer length */
+	__be16 rx_bd_ptr;	/* Rx BD pointer */
+	__be16 tx_bd_ptr;	/* Tx BD pointer */
+	__be32 tx_state;	/* Tx internal state */
+	__be32 tx_ptr;		/* Tx internal data pointer */
+	__be16 tx_crc;		/* temp transmit CRC */
+	__be16 tx_cnt;		/* Tx byte count */
+	__be32 tx_temp;		/* Tx temp */
+	__be16 tx_u_ptr;	/* Tx microcode return address temp */
+	__be16 reserved;
+};
+
+struct fhci_controller_list {
+	struct list_head ctrl_list;	/* control endpoints */
+	struct list_head bulk_list;	/* bulk endpoints */
+	struct list_head iso_list;	/* isochronous endpoints */
+	struct list_head intr_list;	/* interruput endpoints */
+	struct list_head done_list;	/* done transfers */
+};
+
+struct virtual_root_hub {
+	int dev_num;	/* USB address of the root hub */
+	u32 feature;	/* indicates what feature has been set */
+	struct usb_hub_status hub;
+	struct usb_port_status port;
+};
+
+enum fhci_gpios {
+	GPIO_USBOE = 0,
+	GPIO_USBTP,
+	GPIO_USBTN,
+	GPIO_USBRP,
+	GPIO_USBRN,
+	/* these are optional */
+	GPIO_SPEED,
+	GPIO_POWER,
+	NUM_GPIOS,
+};
+
+enum fhci_pins {
+	PIN_USBOE = 0,
+	PIN_USBTP,
+	PIN_USBTN,
+	NUM_PINS,
+};
+
+struct fhci_hcd {
+	enum qe_clock fullspeed_clk;
+	enum qe_clock lowspeed_clk;
+	struct qe_pin *pins[NUM_PINS];
+	struct gpio_desc *gpiods[NUM_GPIOS];
+
+	struct qe_usb_ctlr __iomem *regs; /* I/O memory used to communicate */
+	struct fhci_pram __iomem *pram;	/* Parameter RAM */
+	struct gtm_timer *timer;
+
+	spinlock_t lock;
+	struct fhci_usb *usb_lld; /* Low-level driver */
+	struct virtual_root_hub *vroot_hub; /* the virtual root hub */
+	int active_urbs;
+	struct fhci_controller_list *hc_list;
+	struct tasklet_struct *process_done_task; /* tasklet for done list */
+
+	struct list_head empty_eds;
+	struct list_head empty_tds;
+
+#ifdef CONFIG_FHCI_DEBUG
+	int usb_irq_stat[13];
+	struct dentry *dfs_root;
+#endif
+};
+
+#define USB_FRAME_USAGE 90
+#define FRAME_TIME_USAGE (USB_FRAME_USAGE*10)	/* frame time usage */
+#define SW_FIX_TIME_BETWEEN_TRANSACTION 150	/* SW */
+#define MAX_BYTES_PER_FRAME (USB_FRAME_USAGE*15)
+#define MAX_PERIODIC_FRAME_USAGE 90
+
+/* transaction type */
+enum fhci_ta_type {
+	FHCI_TA_IN = 0,	/* input transaction */
+	FHCI_TA_OUT,	/* output transaction */
+	FHCI_TA_SETUP,	/* setup transaction */
+};
+
+/* transfer mode */
+enum fhci_tf_mode {
+	FHCI_TF_CTRL = 0,
+	FHCI_TF_ISO,
+	FHCI_TF_BULK,
+	FHCI_TF_INTR,
+};
+
+enum fhci_speed {
+	FHCI_FULL_SPEED,
+	FHCI_LOW_SPEED,
+};
+
+/* endpoint state */
+enum fhci_ed_state {
+	FHCI_ED_NEW = 0, /* pipe is new */
+	FHCI_ED_OPER,    /* pipe is operating */
+	FHCI_ED_URB_DEL, /* pipe is in hold because urb is being deleted */
+	FHCI_ED_SKIP,    /* skip this pipe */
+	FHCI_ED_HALTED,  /* pipe is halted */
+};
+
+enum fhci_port_status {
+	FHCI_PORT_POWER_OFF = 0,
+	FHCI_PORT_DISABLED,
+	FHCI_PORT_DISCONNECTING,
+	FHCI_PORT_WAITING,	/* waiting for connection */
+	FHCI_PORT_FULL,		/* full speed connected */
+	FHCI_PORT_LOW,		/* low speed connected */
+};
+
+enum fhci_mem_alloc {
+	MEM_CACHABLE_SYS = 0x00000001,	/* primary DDR,cachable */
+	MEM_NOCACHE_SYS = 0x00000004,	/* primary DDR,non-cachable */
+	MEM_SECONDARY = 0x00000002,	/* either secondary DDR or SDRAM */
+	MEM_PRAM = 0x00000008,		/* multi-user RAM identifier */
+};
+
+/* USB default parameters*/
+#define DEFAULT_RING_LEN	8
+#define DEFAULT_DATA_MEM	MEM_CACHABLE_SYS
+
+struct ed {
+	u8 dev_addr;		/* device address */
+	u8 ep_addr;		/* endpoint address */
+	enum fhci_tf_mode mode;	/* USB transfer mode */
+	enum fhci_speed speed;
+	unsigned int max_pkt_size;
+	enum fhci_ed_state state;
+	struct list_head td_list; /* a list of all queued TD to this pipe */
+	struct list_head node;
+
+	/* read only parameters, should be cleared upon initialization */
+	u8 toggle_carry;	/* toggle carry from the last TD submitted */
+	u16 next_iso;		/* time stamp of next queued ISO transfer */
+	struct td *td_head;	/* a pointer to the current TD handled */
+};
+
+struct td {
+	void *data;		 /* a pointer to the data buffer */
+	unsigned int len;	 /* length of the data to be submitted */
+	unsigned int actual_len; /* actual bytes transferred on this td */
+	enum fhci_ta_type type;	 /* transaction type */
+	u8 toggle;		 /* toggle for next trans. within this TD */
+	u16 iso_index;		 /* ISO transaction index */
+	u16 start_frame;	 /* start frame time stamp */
+	u16 interval;		 /* interval between trans. (for ISO/Intr) */
+	u32 status;		 /* status of the TD */
+	struct ed *ed;		 /* a handle to the corresponding ED */
+	struct urb *urb;	 /* a handle to the corresponding URB */
+	bool ioc;		 /* Inform On Completion */
+	struct list_head node;
+
+	/* read only parameters should be cleared upon initialization */
+	struct packet *pkt;
+	int nak_cnt;
+	int error_cnt;
+	struct list_head frame_lh;
+};
+
+struct packet {
+	u8 *data;	/* packet data */
+	u32 len;	/* packet length */
+	u32 status;	/* status of the packet - equivalent to the status
+			 * field for the corresponding structure td */
+	u32 info;	/* packet information */
+	void __iomem *priv_data; /* private data of the driver (TDs or BDs) */
+};
+
+/* struct for each URB */
+#define URB_INPROGRESS	0
+#define URB_DEL		1
+
+/* URB states (state field) */
+#define US_BULK		0
+#define US_BULK0	1
+
+/* three setup states */
+#define US_CTRL_SETUP	2
+#define US_CTRL_DATA	1
+#define US_CTRL_ACK	0
+
+#define EP_ZERO	0
+
+struct urb_priv {
+	int num_of_tds;
+	int tds_cnt;
+	int state;
+
+	struct td **tds;
+	struct ed *ed;
+	struct timer_list time_out;
+};
+
+struct endpoint {
+	/* Pointer to ep parameter RAM */
+	struct fhci_ep_pram __iomem *ep_pram_ptr;
+
+	/* Host transactions */
+	struct usb_td __iomem *td_base; /* first TD in the ring */
+	struct usb_td __iomem *conf_td; /* next TD for confirm after transac */
+	struct usb_td __iomem *empty_td;/* next TD for new transaction req. */
+	struct kfifo empty_frame_Q;  /* Empty frames list to use */
+	struct kfifo conf_frame_Q;   /* frames passed to TDs,waiting for tx */
+	struct kfifo dummy_packets_Q;/* dummy packets for the CRC overun */
+
+	bool already_pushed_dummy_bd;
+};
+
+/* struct for each 1mSec frame time */
+#define FRAME_IS_TRANSMITTED		0x00
+#define FRAME_TIMER_END_TRANSMISSION	0x01
+#define FRAME_DATA_END_TRANSMISSION	0x02
+#define FRAME_END_TRANSMISSION		0x03
+#define FRAME_IS_PREPARED		0x04
+
+struct fhci_time_frame {
+	u16 frame_num;	 /* frame number */
+	u16 total_bytes; /* total bytes submitted within this frame */
+	u8 frame_status; /* flag that indicates to stop fill this frame */
+	struct list_head tds_list; /* all tds of this frame */
+};
+
+/* internal driver structure*/
+struct fhci_usb {
+	u16 saved_msk;		 /* saving of the USB mask register */
+	struct endpoint *ep0;	 /* pointer for endpoint0 structure */
+	int intr_nesting_cnt;	 /* interrupt nesting counter */
+	u16 max_frame_usage;	 /* max frame time usage,in micro-sec */
+	u16 max_bytes_per_frame; /* max byte can be tx in one time frame */
+	u32 sw_transaction_time; /* sw complete trans time,in micro-sec */
+	struct fhci_time_frame *actual_frame;
+	struct fhci_controller_list *hc_list;	/* main structure for hc */
+	struct virtual_root_hub *vroot_hub;
+	enum fhci_port_status port_status;	/* v_rh port status */
+
+	u32 (*transfer_confirm)(struct fhci_hcd *fhci);
+
+	struct fhci_hcd *fhci;
+};
+
+/*
+ * Various helpers and prototypes below.
+ */
+
+static inline u16 get_frame_num(struct fhci_hcd *fhci)
+{
+	return in_be16(&fhci->pram->frame_num) & 0x07ff;
+}
+
+#define fhci_dbg(fhci, fmt, args...) \
+		dev_dbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_vdbg(fhci, fmt, args...) \
+		dev_vdbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_err(fhci, fmt, args...) \
+		dev_err(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_info(fhci, fmt, args...) \
+		dev_info(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_warn(fhci, fmt, args...) \
+		dev_warn(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+
+static inline struct fhci_hcd *hcd_to_fhci(struct usb_hcd *hcd)
+{
+	return (struct fhci_hcd *)hcd->hcd_priv;
+}
+
+static inline struct usb_hcd *fhci_to_hcd(struct fhci_hcd *fhci)
+{
+	return container_of((void *)fhci, struct usb_hcd, hcd_priv);
+}
+
+/* fifo of pointers */
+static inline int cq_new(struct kfifo *fifo, int size)
+{
+	return kfifo_alloc(fifo, size * sizeof(void *), GFP_KERNEL);
+}
+
+static inline void cq_delete(struct kfifo *kfifo)
+{
+	kfifo_free(kfifo);
+}
+
+static inline unsigned int cq_howmany(struct kfifo *kfifo)
+{
+	return kfifo_len(kfifo) / sizeof(void *);
+}
+
+static inline int cq_put(struct kfifo *kfifo, void *p)
+{
+	return kfifo_in(kfifo, (void *)&p, sizeof(p));
+}
+
+static inline void *cq_get(struct kfifo *kfifo)
+{
+	unsigned int sz;
+	void *p;
+
+	sz = kfifo_out(kfifo, (void *)&p, sizeof(p));
+	if (sz != sizeof(p))
+		return NULL;
+
+	return p;
+}
+
+/* fhci-hcd.c */
+void fhci_start_sof_timer(struct fhci_hcd *fhci);
+void fhci_stop_sof_timer(struct fhci_hcd *fhci);
+u16 fhci_get_sof_timer_count(struct fhci_usb *usb);
+void fhci_usb_enable_interrupt(struct fhci_usb *usb);
+void fhci_usb_disable_interrupt(struct fhci_usb *usb);
+int fhci_ioports_check_bus_state(struct fhci_hcd *fhci);
+
+/* fhci-mem.c */
+void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td);
+void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed);
+struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci);
+struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb,
+			struct urb_priv *urb_priv, struct ed *ed, u16 index,
+			enum fhci_ta_type type, int toggle, u8 *data, u32 len,
+			u16 interval, u16 start_frame, bool ioc);
+void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number);
+
+/* fhci-hub.c */
+void fhci_config_transceiver(struct fhci_hcd *fhci,
+			enum fhci_port_status status);
+void fhci_port_disable(struct fhci_hcd *fhci);
+void fhci_port_enable(void *lld);
+void fhci_io_port_generate_reset(struct fhci_hcd *fhci);
+void fhci_port_reset(void *lld);
+int fhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+		     u16 wIndex, char *buf, u16 wLength);
+
+/* fhci-tds.c */
+void fhci_flush_bds(struct fhci_usb *usb);
+void fhci_flush_actual_frame(struct fhci_usb *usb);
+u32 fhci_host_transaction(struct fhci_usb *usb, struct packet *pkt,
+			  enum fhci_ta_type trans_type, u8 dest_addr,
+			  u8 dest_ep, enum fhci_tf_mode trans_mode,
+			  enum fhci_speed dest_speed, u8 data_toggle);
+void fhci_host_transmit_actual_frame(struct fhci_usb *usb);
+void fhci_tx_conf_interrupt(struct fhci_usb *usb);
+void fhci_push_dummy_bd(struct endpoint *ep);
+u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
+		   u32 ring_len);
+void fhci_init_ep_registers(struct fhci_usb *usb,
+			    struct endpoint *ep,
+			    enum fhci_mem_alloc data_mem);
+void fhci_ep0_free(struct fhci_usb *usb);
+
+/* fhci-sched.c */
+extern struct tasklet_struct fhci_tasklet;
+void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt);
+void fhci_flush_all_transmissions(struct fhci_usb *usb);
+void fhci_schedule_transactions(struct fhci_usb *usb);
+void fhci_device_connected_interrupt(struct fhci_hcd *fhci);
+void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci);
+void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb);
+u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci);
+irqreturn_t fhci_irq(struct usb_hcd *hcd);
+irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd);
+
+/* fhci-q.h */
+void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb);
+struct td *fhci_remove_td_from_ed(struct ed *ed);
+struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame);
+void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed);
+struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame);
+void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td);
+struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list);
+void fhci_done_td(struct urb *urb, struct td *td);
+void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed);
+
+#ifdef CONFIG_FHCI_DEBUG
+
+void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er);
+void fhci_dfs_destroy(struct fhci_hcd *fhci);
+void fhci_dfs_create(struct fhci_hcd *fhci);
+
+#else
+
+static inline void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) {}
+static inline void fhci_dfs_destroy(struct fhci_hcd *fhci) {}
+static inline void fhci_dfs_create(struct fhci_hcd *fhci) {}
+
+#endif /* CONFIG_FHCI_DEBUG */
+
+#endif /* __FHCI_H */
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
new file mode 100644
index 000000000..dc9689607
--- /dev/null
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -0,0 +1,5724 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Faraday FOTG210 EHCI-like driver
+ *
+ * Copyright (c) 2013 Faraday Technology Corporation
+ *
+ * Author: Yuan-Hsin Chen <yhchen@faraday-tech.com>
+ *	   Feng-Hsin Chiang <john453@faraday-tech.com>
+ *	   Po-Yu Chuang <ratbert.chuang@gmail.com>
+ *
+ * Most of code borrowed from the Linux-3.7 EHCI driver
+ */
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/vmalloc.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/hrtimer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/clk.h>
+
+#include <asm/byteorder.h>
+#include <asm/irq.h>
+#include <asm/unaligned.h>
+
+#define DRIVER_AUTHOR "Yuan-Hsin Chen"
+#define DRIVER_DESC "FOTG210 Host Controller (EHCI) Driver"
+static const char hcd_name[] = "fotg210_hcd";
+
+#undef FOTG210_URB_TRACE
+#define FOTG210_STATS
+
+/* magic numbers that can affect system performance */
+#define FOTG210_TUNE_CERR	3 /* 0-3 qtd retries; 0 == don't stop */
+#define FOTG210_TUNE_RL_HS	4 /* nak throttle; see 4.9 */
+#define FOTG210_TUNE_RL_TT	0
+#define FOTG210_TUNE_MULT_HS	1 /* 1-3 transactions/uframe; 4.10.3 */
+#define FOTG210_TUNE_MULT_TT	1
+
+/* Some drivers think it's safe to schedule isochronous transfers more than 256
+ * ms into the future (partly as a result of an old bug in the scheduling
+ * code).  In an attempt to avoid trouble, we will use a minimum scheduling
+ * length of 512 frames instead of 256.
+ */
+#define FOTG210_TUNE_FLS 1 /* (medium) 512-frame schedule */
+
+/* Initial IRQ latency:  faster than hw default */
+static int log2_irq_thresh; /* 0 to 6 */
+module_param(log2_irq_thresh, int, S_IRUGO);
+MODULE_PARM_DESC(log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
+
+/* initial park setting:  slower than hw default */
+static unsigned park;
+module_param(park, uint, S_IRUGO);
+MODULE_PARM_DESC(park, "park setting; 1-3 back-to-back async packets");
+
+/* for link power management(LPM) feature */
+static unsigned int hird;
+module_param(hird, int, S_IRUGO);
+MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us");
+
+#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
+
+#include "fotg210.h"
+
+#define fotg210_dbg(fotg210, fmt, args...) \
+	dev_dbg(fotg210_to_hcd(fotg210)->self.controller, fmt, ## args)
+#define fotg210_err(fotg210, fmt, args...) \
+	dev_err(fotg210_to_hcd(fotg210)->self.controller, fmt, ## args)
+#define fotg210_info(fotg210, fmt, args...) \
+	dev_info(fotg210_to_hcd(fotg210)->self.controller, fmt, ## args)
+#define fotg210_warn(fotg210, fmt, args...) \
+	dev_warn(fotg210_to_hcd(fotg210)->self.controller, fmt, ## args)
+
+/* check the values in the HCSPARAMS register (host controller _Structural_
+ * parameters) see EHCI spec, Table 2-4 for each value
+ */
+static void dbg_hcs_params(struct fotg210_hcd *fotg210, char *label)
+{
+	u32 params = fotg210_readl(fotg210, &fotg210->caps->hcs_params);
+
+	fotg210_dbg(fotg210, "%s hcs_params 0x%x ports=%d\n", label, params,
+			HCS_N_PORTS(params));
+}
+
+/* check the values in the HCCPARAMS register (host controller _Capability_
+ * parameters) see EHCI Spec, Table 2-5 for each value
+ */
+static void dbg_hcc_params(struct fotg210_hcd *fotg210, char *label)
+{
+	u32 params = fotg210_readl(fotg210, &fotg210->caps->hcc_params);
+
+	fotg210_dbg(fotg210, "%s hcc_params %04x uframes %s%s\n", label,
+			params,
+			HCC_PGM_FRAMELISTLEN(params) ? "256/512/1024" : "1024",
+			HCC_CANPARK(params) ? " park" : "");
+}
+
+static void __maybe_unused
+dbg_qtd(const char *label, struct fotg210_hcd *fotg210, struct fotg210_qtd *qtd)
+{
+	fotg210_dbg(fotg210, "%s td %p n%08x %08x t%08x p0=%08x\n", label, qtd,
+			hc32_to_cpup(fotg210, &qtd->hw_next),
+			hc32_to_cpup(fotg210, &qtd->hw_alt_next),
+			hc32_to_cpup(fotg210, &qtd->hw_token),
+			hc32_to_cpup(fotg210, &qtd->hw_buf[0]));
+	if (qtd->hw_buf[1])
+		fotg210_dbg(fotg210, "  p1=%08x p2=%08x p3=%08x p4=%08x\n",
+				hc32_to_cpup(fotg210, &qtd->hw_buf[1]),
+				hc32_to_cpup(fotg210, &qtd->hw_buf[2]),
+				hc32_to_cpup(fotg210, &qtd->hw_buf[3]),
+				hc32_to_cpup(fotg210, &qtd->hw_buf[4]));
+}
+
+static void __maybe_unused
+dbg_qh(const char *label, struct fotg210_hcd *fotg210, struct fotg210_qh *qh)
+{
+	struct fotg210_qh_hw *hw = qh->hw;
+
+	fotg210_dbg(fotg210, "%s qh %p n%08x info %x %x qtd %x\n", label, qh,
+			hw->hw_next, hw->hw_info1, hw->hw_info2,
+			hw->hw_current);
+
+	dbg_qtd("overlay", fotg210, (struct fotg210_qtd *) &hw->hw_qtd_next);
+}
+
+static void __maybe_unused
+dbg_itd(const char *label, struct fotg210_hcd *fotg210, struct fotg210_itd *itd)
+{
+	fotg210_dbg(fotg210, "%s[%d] itd %p, next %08x, urb %p\n", label,
+			itd->frame, itd, hc32_to_cpu(fotg210, itd->hw_next),
+			itd->urb);
+
+	fotg210_dbg(fotg210,
+			"  trans: %08x %08x %08x %08x %08x %08x %08x %08x\n",
+			hc32_to_cpu(fotg210, itd->hw_transaction[0]),
+			hc32_to_cpu(fotg210, itd->hw_transaction[1]),
+			hc32_to_cpu(fotg210, itd->hw_transaction[2]),
+			hc32_to_cpu(fotg210, itd->hw_transaction[3]),
+			hc32_to_cpu(fotg210, itd->hw_transaction[4]),
+			hc32_to_cpu(fotg210, itd->hw_transaction[5]),
+			hc32_to_cpu(fotg210, itd->hw_transaction[6]),
+			hc32_to_cpu(fotg210, itd->hw_transaction[7]));
+
+	fotg210_dbg(fotg210,
+			"  buf:   %08x %08x %08x %08x %08x %08x %08x\n",
+			hc32_to_cpu(fotg210, itd->hw_bufp[0]),
+			hc32_to_cpu(fotg210, itd->hw_bufp[1]),
+			hc32_to_cpu(fotg210, itd->hw_bufp[2]),
+			hc32_to_cpu(fotg210, itd->hw_bufp[3]),
+			hc32_to_cpu(fotg210, itd->hw_bufp[4]),
+			hc32_to_cpu(fotg210, itd->hw_bufp[5]),
+			hc32_to_cpu(fotg210, itd->hw_bufp[6]));
+
+	fotg210_dbg(fotg210, "  index: %d %d %d %d %d %d %d %d\n",
+			itd->index[0], itd->index[1], itd->index[2],
+			itd->index[3], itd->index[4], itd->index[5],
+			itd->index[6], itd->index[7]);
+}
+
+static int __maybe_unused
+dbg_status_buf(char *buf, unsigned len, const char *label, u32 status)
+{
+	return scnprintf(buf, len, "%s%sstatus %04x%s%s%s%s%s%s%s%s%s%s",
+			label, label[0] ? " " : "", status,
+			(status & STS_ASS) ? " Async" : "",
+			(status & STS_PSS) ? " Periodic" : "",
+			(status & STS_RECL) ? " Recl" : "",
+			(status & STS_HALT) ? " Halt" : "",
+			(status & STS_IAA) ? " IAA" : "",
+			(status & STS_FATAL) ? " FATAL" : "",
+			(status & STS_FLR) ? " FLR" : "",
+			(status & STS_PCD) ? " PCD" : "",
+			(status & STS_ERR) ? " ERR" : "",
+			(status & STS_INT) ? " INT" : "");
+}
+
+static int __maybe_unused
+dbg_intr_buf(char *buf, unsigned len, const char *label, u32 enable)
+{
+	return scnprintf(buf, len, "%s%sintrenable %02x%s%s%s%s%s%s",
+			label, label[0] ? " " : "", enable,
+			(enable & STS_IAA) ? " IAA" : "",
+			(enable & STS_FATAL) ? " FATAL" : "",
+			(enable & STS_FLR) ? " FLR" : "",
+			(enable & STS_PCD) ? " PCD" : "",
+			(enable & STS_ERR) ? " ERR" : "",
+			(enable & STS_INT) ? " INT" : "");
+}
+
+static const char *const fls_strings[] = { "1024", "512", "256", "??" };
+
+static int dbg_command_buf(char *buf, unsigned len, const char *label,
+		u32 command)
+{
+	return scnprintf(buf, len,
+			"%s%scommand %07x %s=%d ithresh=%d%s%s%s period=%s%s %s",
+			label, label[0] ? " " : "", command,
+			(command & CMD_PARK) ? " park" : "(park)",
+			CMD_PARK_CNT(command),
+			(command >> 16) & 0x3f,
+			(command & CMD_IAAD) ? " IAAD" : "",
+			(command & CMD_ASE) ? " Async" : "",
+			(command & CMD_PSE) ? " Periodic" : "",
+			fls_strings[(command >> 2) & 0x3],
+			(command & CMD_RESET) ? " Reset" : "",
+			(command & CMD_RUN) ? "RUN" : "HALT");
+}
+
+static char *dbg_port_buf(char *buf, unsigned len, const char *label, int port,
+		u32 status)
+{
+	char *sig;
+
+	/* signaling state */
+	switch (status & (3 << 10)) {
+	case 0 << 10:
+		sig = "se0";
+		break;
+	case 1 << 10:
+		sig = "k";
+		break; /* low speed */
+	case 2 << 10:
+		sig = "j";
+		break;
+	default:
+		sig = "?";
+		break;
+	}
+
+	scnprintf(buf, len, "%s%sport:%d status %06x %d sig=%s%s%s%s%s%s%s%s",
+			label, label[0] ? " " : "", port, status,
+			status >> 25, /*device address */
+			sig,
+			(status & PORT_RESET) ? " RESET" : "",
+			(status & PORT_SUSPEND) ? " SUSPEND" : "",
+			(status & PORT_RESUME) ? " RESUME" : "",
+			(status & PORT_PEC) ? " PEC" : "",
+			(status & PORT_PE) ? " PE" : "",
+			(status & PORT_CSC) ? " CSC" : "",
+			(status & PORT_CONNECT) ? " CONNECT" : "");
+
+	return buf;
+}
+
+/* functions have the "wrong" filename when they're output... */
+#define dbg_status(fotg210, label, status) {			\
+	char _buf[80];						\
+	dbg_status_buf(_buf, sizeof(_buf), label, status);	\
+	fotg210_dbg(fotg210, "%s\n", _buf);			\
+}
+
+#define dbg_cmd(fotg210, label, command) {			\
+	char _buf[80];						\
+	dbg_command_buf(_buf, sizeof(_buf), label, command);	\
+	fotg210_dbg(fotg210, "%s\n", _buf);			\
+}
+
+#define dbg_port(fotg210, label, port, status) {			       \
+	char _buf[80];							       \
+	fotg210_dbg(fotg210, "%s\n",					       \
+			dbg_port_buf(_buf, sizeof(_buf), label, port, status));\
+}
+
+/* troubleshooting help: expose state in debugfs */
+static int debug_async_open(struct inode *, struct file *);
+static int debug_periodic_open(struct inode *, struct file *);
+static int debug_registers_open(struct inode *, struct file *);
+static int debug_async_open(struct inode *, struct file *);
+
+static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*);
+static int debug_close(struct inode *, struct file *);
+
+static const struct file_operations debug_async_fops = {
+	.owner		= THIS_MODULE,
+	.open		= debug_async_open,
+	.read		= debug_output,
+	.release	= debug_close,
+	.llseek		= default_llseek,
+};
+static const struct file_operations debug_periodic_fops = {
+	.owner		= THIS_MODULE,
+	.open		= debug_periodic_open,
+	.read		= debug_output,
+	.release	= debug_close,
+	.llseek		= default_llseek,
+};
+static const struct file_operations debug_registers_fops = {
+	.owner		= THIS_MODULE,
+	.open		= debug_registers_open,
+	.read		= debug_output,
+	.release	= debug_close,
+	.llseek		= default_llseek,
+};
+
+static struct dentry *fotg210_debug_root;
+
+struct debug_buffer {
+	ssize_t (*fill_func)(struct debug_buffer *);	/* fill method */
+	struct usb_bus *bus;
+	struct mutex mutex;	/* protect filling of buffer */
+	size_t count;		/* number of characters filled into buffer */
+	char *output_buf;
+	size_t alloc_size;
+};
+
+static inline char speed_char(u32 scratch)
+{
+	switch (scratch & (3 << 12)) {
+	case QH_FULL_SPEED:
+		return 'f';
+
+	case QH_LOW_SPEED:
+		return 'l';
+
+	case QH_HIGH_SPEED:
+		return 'h';
+
+	default:
+		return '?';
+	}
+}
+
+static inline char token_mark(struct fotg210_hcd *fotg210, __hc32 token)
+{
+	__u32 v = hc32_to_cpu(fotg210, token);
+
+	if (v & QTD_STS_ACTIVE)
+		return '*';
+	if (v & QTD_STS_HALT)
+		return '-';
+	if (!IS_SHORT_READ(v))
+		return ' ';
+	/* tries to advance through hw_alt_next */
+	return '/';
+}
+
+static void qh_lines(struct fotg210_hcd *fotg210, struct fotg210_qh *qh,
+		char **nextp, unsigned *sizep)
+{
+	u32 scratch;
+	u32 hw_curr;
+	struct fotg210_qtd *td;
+	unsigned temp;
+	unsigned size = *sizep;
+	char *next = *nextp;
+	char mark;
+	__le32 list_end = FOTG210_LIST_END(fotg210);
+	struct fotg210_qh_hw *hw = qh->hw;
+
+	if (hw->hw_qtd_next == list_end) /* NEC does this */
+		mark = '@';
+	else
+		mark = token_mark(fotg210, hw->hw_token);
+	if (mark == '/') { /* qh_alt_next controls qh advance? */
+		if ((hw->hw_alt_next & QTD_MASK(fotg210)) ==
+		    fotg210->async->hw->hw_alt_next)
+			mark = '#'; /* blocked */
+		else if (hw->hw_alt_next == list_end)
+			mark = '.'; /* use hw_qtd_next */
+		/* else alt_next points to some other qtd */
+	}
+	scratch = hc32_to_cpup(fotg210, &hw->hw_info1);
+	hw_curr = (mark == '*') ? hc32_to_cpup(fotg210, &hw->hw_current) : 0;
+	temp = scnprintf(next, size,
+			"qh/%p dev%d %cs ep%d %08x %08x(%08x%c %s nak%d)",
+			qh, scratch & 0x007f,
+			speed_char(scratch),
+			(scratch >> 8) & 0x000f,
+			scratch, hc32_to_cpup(fotg210, &hw->hw_info2),
+			hc32_to_cpup(fotg210, &hw->hw_token), mark,
+			(cpu_to_hc32(fotg210, QTD_TOGGLE) & hw->hw_token)
+				? "data1" : "data0",
+			(hc32_to_cpup(fotg210, &hw->hw_alt_next) >> 1) & 0x0f);
+	size -= temp;
+	next += temp;
+
+	/* hc may be modifying the list as we read it ... */
+	list_for_each_entry(td, &qh->qtd_list, qtd_list) {
+		scratch = hc32_to_cpup(fotg210, &td->hw_token);
+		mark = ' ';
+		if (hw_curr == td->qtd_dma)
+			mark = '*';
+		else if (hw->hw_qtd_next == cpu_to_hc32(fotg210, td->qtd_dma))
+			mark = '+';
+		else if (QTD_LENGTH(scratch)) {
+			if (td->hw_alt_next == fotg210->async->hw->hw_alt_next)
+				mark = '#';
+			else if (td->hw_alt_next != list_end)
+				mark = '/';
+		}
+		temp = snprintf(next, size,
+				"\n\t%p%c%s len=%d %08x urb %p",
+				td, mark, ({ char *tmp;
+				switch ((scratch>>8)&0x03) {
+				case 0:
+					tmp = "out";
+					break;
+				case 1:
+					tmp = "in";
+					break;
+				case 2:
+					tmp = "setup";
+					break;
+				default:
+					tmp = "?";
+					break;
+				 } tmp; }),
+				(scratch >> 16) & 0x7fff,
+				scratch,
+				td->urb);
+		if (size < temp)
+			temp = size;
+		size -= temp;
+		next += temp;
+	}
+
+	temp = snprintf(next, size, "\n");
+	if (size < temp)
+		temp = size;
+
+	size -= temp;
+	next += temp;
+
+	*sizep = size;
+	*nextp = next;
+}
+
+static ssize_t fill_async_buffer(struct debug_buffer *buf)
+{
+	struct usb_hcd *hcd;
+	struct fotg210_hcd *fotg210;
+	unsigned long flags;
+	unsigned temp, size;
+	char *next;
+	struct fotg210_qh *qh;
+
+	hcd = bus_to_hcd(buf->bus);
+	fotg210 = hcd_to_fotg210(hcd);
+	next = buf->output_buf;
+	size = buf->alloc_size;
+
+	*next = 0;
+
+	/* dumps a snapshot of the async schedule.
+	 * usually empty except for long-term bulk reads, or head.
+	 * one QH per line, and TDs we know about
+	 */
+	spin_lock_irqsave(&fotg210->lock, flags);
+	for (qh = fotg210->async->qh_next.qh; size > 0 && qh;
+			qh = qh->qh_next.qh)
+		qh_lines(fotg210, qh, &next, &size);
+	if (fotg210->async_unlink && size > 0) {
+		temp = scnprintf(next, size, "\nunlink =\n");
+		size -= temp;
+		next += temp;
+
+		for (qh = fotg210->async_unlink; size > 0 && qh;
+				qh = qh->unlink_next)
+			qh_lines(fotg210, qh, &next, &size);
+	}
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+
+	return strlen(buf->output_buf);
+}
+
+/* count tds, get ep direction */
+static unsigned output_buf_tds_dir(char *buf, struct fotg210_hcd *fotg210,
+		struct fotg210_qh_hw *hw, struct fotg210_qh *qh, unsigned size)
+{
+	u32 scratch = hc32_to_cpup(fotg210, &hw->hw_info1);
+	struct fotg210_qtd *qtd;
+	char *type = "";
+	unsigned temp = 0;
+
+	/* count tds, get ep direction */
+	list_for_each_entry(qtd, &qh->qtd_list, qtd_list) {
+		temp++;
+		switch ((hc32_to_cpu(fotg210, qtd->hw_token) >> 8) & 0x03) {
+		case 0:
+			type = "out";
+			continue;
+		case 1:
+			type = "in";
+			continue;
+		}
+	}
+
+	return scnprintf(buf, size, "(%c%d ep%d%s [%d/%d] q%d p%d)",
+			speed_char(scratch), scratch & 0x007f,
+			(scratch >> 8) & 0x000f, type, qh->usecs,
+			qh->c_usecs, temp, (scratch >> 16) & 0x7ff);
+}
+
+#define DBG_SCHED_LIMIT 64
+static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
+{
+	struct usb_hcd *hcd;
+	struct fotg210_hcd *fotg210;
+	unsigned long flags;
+	union fotg210_shadow p, *seen;
+	unsigned temp, size, seen_count;
+	char *next;
+	unsigned i;
+	__hc32 tag;
+
+	seen = kmalloc_array(DBG_SCHED_LIMIT, sizeof(*seen), GFP_ATOMIC);
+	if (!seen)
+		return 0;
+
+	seen_count = 0;
+
+	hcd = bus_to_hcd(buf->bus);
+	fotg210 = hcd_to_fotg210(hcd);
+	next = buf->output_buf;
+	size = buf->alloc_size;
+
+	temp = scnprintf(next, size, "size = %d\n", fotg210->periodic_size);
+	size -= temp;
+	next += temp;
+
+	/* dump a snapshot of the periodic schedule.
+	 * iso changes, interrupt usually doesn't.
+	 */
+	spin_lock_irqsave(&fotg210->lock, flags);
+	for (i = 0; i < fotg210->periodic_size; i++) {
+		p = fotg210->pshadow[i];
+		if (likely(!p.ptr))
+			continue;
+
+		tag = Q_NEXT_TYPE(fotg210, fotg210->periodic[i]);
+
+		temp = scnprintf(next, size, "%4d: ", i);
+		size -= temp;
+		next += temp;
+
+		do {
+			struct fotg210_qh_hw *hw;
+
+			switch (hc32_to_cpu(fotg210, tag)) {
+			case Q_TYPE_QH:
+				hw = p.qh->hw;
+				temp = scnprintf(next, size, " qh%d-%04x/%p",
+						p.qh->period,
+						hc32_to_cpup(fotg210,
+							&hw->hw_info2)
+							/* uframe masks */
+							& (QH_CMASK | QH_SMASK),
+						p.qh);
+				size -= temp;
+				next += temp;
+				/* don't repeat what follows this qh */
+				for (temp = 0; temp < seen_count; temp++) {
+					if (seen[temp].ptr != p.ptr)
+						continue;
+					if (p.qh->qh_next.ptr) {
+						temp = scnprintf(next, size,
+								" ...");
+						size -= temp;
+						next += temp;
+					}
+					break;
+				}
+				/* show more info the first time around */
+				if (temp == seen_count) {
+					temp = output_buf_tds_dir(next,
+							fotg210, hw,
+							p.qh, size);
+
+					if (seen_count < DBG_SCHED_LIMIT)
+						seen[seen_count++].qh = p.qh;
+				} else
+					temp = 0;
+				tag = Q_NEXT_TYPE(fotg210, hw->hw_next);
+				p = p.qh->qh_next;
+				break;
+			case Q_TYPE_FSTN:
+				temp = scnprintf(next, size,
+						" fstn-%8x/%p",
+						p.fstn->hw_prev, p.fstn);
+				tag = Q_NEXT_TYPE(fotg210, p.fstn->hw_next);
+				p = p.fstn->fstn_next;
+				break;
+			case Q_TYPE_ITD:
+				temp = scnprintf(next, size,
+						" itd/%p", p.itd);
+				tag = Q_NEXT_TYPE(fotg210, p.itd->hw_next);
+				p = p.itd->itd_next;
+				break;
+			}
+			size -= temp;
+			next += temp;
+		} while (p.ptr);
+
+		temp = scnprintf(next, size, "\n");
+		size -= temp;
+		next += temp;
+	}
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+	kfree(seen);
+
+	return buf->alloc_size - size;
+}
+#undef DBG_SCHED_LIMIT
+
+static const char *rh_state_string(struct fotg210_hcd *fotg210)
+{
+	switch (fotg210->rh_state) {
+	case FOTG210_RH_HALTED:
+		return "halted";
+	case FOTG210_RH_SUSPENDED:
+		return "suspended";
+	case FOTG210_RH_RUNNING:
+		return "running";
+	case FOTG210_RH_STOPPING:
+		return "stopping";
+	}
+	return "?";
+}
+
+static ssize_t fill_registers_buffer(struct debug_buffer *buf)
+{
+	struct usb_hcd *hcd;
+	struct fotg210_hcd *fotg210;
+	unsigned long flags;
+	unsigned temp, size, i;
+	char *next, scratch[80];
+	static const char fmt[] = "%*s\n";
+	static const char label[] = "";
+
+	hcd = bus_to_hcd(buf->bus);
+	fotg210 = hcd_to_fotg210(hcd);
+	next = buf->output_buf;
+	size = buf->alloc_size;
+
+	spin_lock_irqsave(&fotg210->lock, flags);
+
+	if (!HCD_HW_ACCESSIBLE(hcd)) {
+		size = scnprintf(next, size,
+				"bus %s, device %s\n"
+				"%s\n"
+				"SUSPENDED(no register access)\n",
+				hcd->self.controller->bus->name,
+				dev_name(hcd->self.controller),
+				hcd->product_desc);
+		goto done;
+	}
+
+	/* Capability Registers */
+	i = HC_VERSION(fotg210, fotg210_readl(fotg210,
+			&fotg210->caps->hc_capbase));
+	temp = scnprintf(next, size,
+			"bus %s, device %s\n"
+			"%s\n"
+			"EHCI %x.%02x, rh state %s\n",
+			hcd->self.controller->bus->name,
+			dev_name(hcd->self.controller),
+			hcd->product_desc,
+			i >> 8, i & 0x0ff, rh_state_string(fotg210));
+	size -= temp;
+	next += temp;
+
+	/* FIXME interpret both types of params */
+	i = fotg210_readl(fotg210, &fotg210->caps->hcs_params);
+	temp = scnprintf(next, size, "structural params 0x%08x\n", i);
+	size -= temp;
+	next += temp;
+
+	i = fotg210_readl(fotg210, &fotg210->caps->hcc_params);
+	temp = scnprintf(next, size, "capability params 0x%08x\n", i);
+	size -= temp;
+	next += temp;
+
+	/* Operational Registers */
+	temp = dbg_status_buf(scratch, sizeof(scratch), label,
+			fotg210_readl(fotg210, &fotg210->regs->status));
+	temp = scnprintf(next, size, fmt, temp, scratch);
+	size -= temp;
+	next += temp;
+
+	temp = dbg_command_buf(scratch, sizeof(scratch), label,
+			fotg210_readl(fotg210, &fotg210->regs->command));
+	temp = scnprintf(next, size, fmt, temp, scratch);
+	size -= temp;
+	next += temp;
+
+	temp = dbg_intr_buf(scratch, sizeof(scratch), label,
+			fotg210_readl(fotg210, &fotg210->regs->intr_enable));
+	temp = scnprintf(next, size, fmt, temp, scratch);
+	size -= temp;
+	next += temp;
+
+	temp = scnprintf(next, size, "uframe %04x\n",
+			fotg210_read_frame_index(fotg210));
+	size -= temp;
+	next += temp;
+
+	if (fotg210->async_unlink) {
+		temp = scnprintf(next, size, "async unlink qh %p\n",
+				fotg210->async_unlink);
+		size -= temp;
+		next += temp;
+	}
+
+#ifdef FOTG210_STATS
+	temp = scnprintf(next, size,
+			"irq normal %ld err %ld iaa %ld(lost %ld)\n",
+			fotg210->stats.normal, fotg210->stats.error,
+			fotg210->stats.iaa, fotg210->stats.lost_iaa);
+	size -= temp;
+	next += temp;
+
+	temp = scnprintf(next, size, "complete %ld unlink %ld\n",
+			fotg210->stats.complete, fotg210->stats.unlink);
+	size -= temp;
+	next += temp;
+#endif
+
+done:
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+
+	return buf->alloc_size - size;
+}
+
+static struct debug_buffer
+*alloc_buffer(struct usb_bus *bus, ssize_t (*fill_func)(struct debug_buffer *))
+{
+	struct debug_buffer *buf;
+
+	buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
+
+	if (buf) {
+		buf->bus = bus;
+		buf->fill_func = fill_func;
+		mutex_init(&buf->mutex);
+		buf->alloc_size = PAGE_SIZE;
+	}
+
+	return buf;
+}
+
+static int fill_buffer(struct debug_buffer *buf)
+{
+	int ret = 0;
+
+	if (!buf->output_buf)
+		buf->output_buf = vmalloc(buf->alloc_size);
+
+	if (!buf->output_buf) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = buf->fill_func(buf);
+
+	if (ret >= 0) {
+		buf->count = ret;
+		ret = 0;
+	}
+
+out:
+	return ret;
+}
+
+static ssize_t debug_output(struct file *file, char __user *user_buf,
+		size_t len, loff_t *offset)
+{
+	struct debug_buffer *buf = file->private_data;
+	int ret = 0;
+
+	mutex_lock(&buf->mutex);
+	if (buf->count == 0) {
+		ret = fill_buffer(buf);
+		if (ret != 0) {
+			mutex_unlock(&buf->mutex);
+			goto out;
+		}
+	}
+	mutex_unlock(&buf->mutex);
+
+	ret = simple_read_from_buffer(user_buf, len, offset,
+			buf->output_buf, buf->count);
+
+out:
+	return ret;
+
+}
+
+static int debug_close(struct inode *inode, struct file *file)
+{
+	struct debug_buffer *buf = file->private_data;
+
+	if (buf) {
+		vfree(buf->output_buf);
+		kfree(buf);
+	}
+
+	return 0;
+}
+static int debug_async_open(struct inode *inode, struct file *file)
+{
+	file->private_data = alloc_buffer(inode->i_private, fill_async_buffer);
+
+	return file->private_data ? 0 : -ENOMEM;
+}
+
+static int debug_periodic_open(struct inode *inode, struct file *file)
+{
+	struct debug_buffer *buf;
+
+	buf = alloc_buffer(inode->i_private, fill_periodic_buffer);
+	if (!buf)
+		return -ENOMEM;
+
+	buf->alloc_size = (sizeof(void *) == 4 ? 6 : 8)*PAGE_SIZE;
+	file->private_data = buf;
+	return 0;
+}
+
+static int debug_registers_open(struct inode *inode, struct file *file)
+{
+	file->private_data = alloc_buffer(inode->i_private,
+			fill_registers_buffer);
+
+	return file->private_data ? 0 : -ENOMEM;
+}
+
+static inline void create_debug_files(struct fotg210_hcd *fotg210)
+{
+	struct usb_bus *bus = &fotg210_to_hcd(fotg210)->self;
+	struct dentry *root;
+
+	root = debugfs_create_dir(bus->bus_name, fotg210_debug_root);
+
+	debugfs_create_file("async", S_IRUGO, root, bus, &debug_async_fops);
+	debugfs_create_file("periodic", S_IRUGO, root, bus,
+			    &debug_periodic_fops);
+	debugfs_create_file("registers", S_IRUGO, root, bus,
+			    &debug_registers_fops);
+}
+
+static inline void remove_debug_files(struct fotg210_hcd *fotg210)
+{
+	struct usb_bus *bus = &fotg210_to_hcd(fotg210)->self;
+
+	debugfs_lookup_and_remove(bus->bus_name, fotg210_debug_root);
+}
+
+/* handshake - spin reading hc until handshake completes or fails
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @usec: timeout in microseconds
+ *
+ * Returns negative errno, or zero on success
+ *
+ * Success happens when the "mask" bits have the specified value (hardware
+ * handshake done).  There are two failure modes:  "usec" have passed (major
+ * hardware flakeout), or the register reads as all-ones (hardware removed).
+ *
+ * That last failure should_only happen in cases like physical cardbus eject
+ * before driver shutdown. But it also seems to be caused by bugs in cardbus
+ * bridge shutdown:  shutting down the bridge before the devices using it.
+ */
+static int handshake(struct fotg210_hcd *fotg210, void __iomem *ptr,
+		u32 mask, u32 done, int usec)
+{
+	u32 result;
+	int ret;
+
+	ret = readl_poll_timeout_atomic(ptr, result,
+					((result & mask) == done ||
+					 result == U32_MAX), 1, usec);
+	if (result == U32_MAX)		/* card removed */
+		return -ENODEV;
+
+	return ret;
+}
+
+/* Force HC to halt state from unknown (EHCI spec section 2.3).
+ * Must be called with interrupts enabled and the lock not held.
+ */
+static int fotg210_halt(struct fotg210_hcd *fotg210)
+{
+	u32 temp;
+
+	spin_lock_irq(&fotg210->lock);
+
+	/* disable any irqs left enabled by previous code */
+	fotg210_writel(fotg210, 0, &fotg210->regs->intr_enable);
+
+	/*
+	 * This routine gets called during probe before fotg210->command
+	 * has been initialized, so we can't rely on its value.
+	 */
+	fotg210->command &= ~CMD_RUN;
+	temp = fotg210_readl(fotg210, &fotg210->regs->command);
+	temp &= ~(CMD_RUN | CMD_IAAD);
+	fotg210_writel(fotg210, temp, &fotg210->regs->command);
+
+	spin_unlock_irq(&fotg210->lock);
+	synchronize_irq(fotg210_to_hcd(fotg210)->irq);
+
+	return handshake(fotg210, &fotg210->regs->status,
+			STS_HALT, STS_HALT, 16 * 125);
+}
+
+/* Reset a non-running (STS_HALT == 1) controller.
+ * Must be called with interrupts enabled and the lock not held.
+ */
+static int fotg210_reset(struct fotg210_hcd *fotg210)
+{
+	int retval;
+	u32 command = fotg210_readl(fotg210, &fotg210->regs->command);
+
+	/* If the EHCI debug controller is active, special care must be
+	 * taken before and after a host controller reset
+	 */
+	if (fotg210->debug && !dbgp_reset_prep(fotg210_to_hcd(fotg210)))
+		fotg210->debug = NULL;
+
+	command |= CMD_RESET;
+	dbg_cmd(fotg210, "reset", command);
+	fotg210_writel(fotg210, command, &fotg210->regs->command);
+	fotg210->rh_state = FOTG210_RH_HALTED;
+	fotg210->next_statechange = jiffies;
+	retval = handshake(fotg210, &fotg210->regs->command,
+			CMD_RESET, 0, 250 * 1000);
+
+	if (retval)
+		return retval;
+
+	if (fotg210->debug)
+		dbgp_external_startup(fotg210_to_hcd(fotg210));
+
+	fotg210->port_c_suspend = fotg210->suspended_ports =
+			fotg210->resuming_ports = 0;
+	return retval;
+}
+
+/* Idle the controller (turn off the schedules).
+ * Must be called with interrupts enabled and the lock not held.
+ */
+static void fotg210_quiesce(struct fotg210_hcd *fotg210)
+{
+	u32 temp;
+
+	if (fotg210->rh_state != FOTG210_RH_RUNNING)
+		return;
+
+	/* wait for any schedule enables/disables to take effect */
+	temp = (fotg210->command << 10) & (STS_ASS | STS_PSS);
+	handshake(fotg210, &fotg210->regs->status, STS_ASS | STS_PSS, temp,
+			16 * 125);
+
+	/* then disable anything that's still active */
+	spin_lock_irq(&fotg210->lock);
+	fotg210->command &= ~(CMD_ASE | CMD_PSE);
+	fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command);
+	spin_unlock_irq(&fotg210->lock);
+
+	/* hardware can take 16 microframes to turn off ... */
+	handshake(fotg210, &fotg210->regs->status, STS_ASS | STS_PSS, 0,
+			16 * 125);
+}
+
+static void end_unlink_async(struct fotg210_hcd *fotg210);
+static void unlink_empty_async(struct fotg210_hcd *fotg210);
+static void fotg210_work(struct fotg210_hcd *fotg210);
+static void start_unlink_intr(struct fotg210_hcd *fotg210,
+			      struct fotg210_qh *qh);
+static void end_unlink_intr(struct fotg210_hcd *fotg210, struct fotg210_qh *qh);
+
+/* Set a bit in the USBCMD register */
+static void fotg210_set_command_bit(struct fotg210_hcd *fotg210, u32 bit)
+{
+	fotg210->command |= bit;
+	fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command);
+
+	/* unblock posted write */
+	fotg210_readl(fotg210, &fotg210->regs->command);
+}
+
+/* Clear a bit in the USBCMD register */
+static void fotg210_clear_command_bit(struct fotg210_hcd *fotg210, u32 bit)
+{
+	fotg210->command &= ~bit;
+	fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command);
+
+	/* unblock posted write */
+	fotg210_readl(fotg210, &fotg210->regs->command);
+}
+
+/* EHCI timer support...  Now using hrtimers.
+ *
+ * Lots of different events are triggered from fotg210->hrtimer.  Whenever
+ * the timer routine runs, it checks each possible event; events that are
+ * currently enabled and whose expiration time has passed get handled.
+ * The set of enabled events is stored as a collection of bitflags in
+ * fotg210->enabled_hrtimer_events, and they are numbered in order of
+ * increasing delay values (ranging between 1 ms and 100 ms).
+ *
+ * Rather than implementing a sorted list or tree of all pending events,
+ * we keep track only of the lowest-numbered pending event, in
+ * fotg210->next_hrtimer_event.  Whenever fotg210->hrtimer gets restarted, its
+ * expiration time is set to the timeout value for this event.
+ *
+ * As a result, events might not get handled right away; the actual delay
+ * could be anywhere up to twice the requested delay.  This doesn't
+ * matter, because none of the events are especially time-critical.  The
+ * ones that matter most all have a delay of 1 ms, so they will be
+ * handled after 2 ms at most, which is okay.  In addition to this, we
+ * allow for an expiration range of 1 ms.
+ */
+
+/* Delay lengths for the hrtimer event types.
+ * Keep this list sorted by delay length, in the same order as
+ * the event types indexed by enum fotg210_hrtimer_event in fotg210.h.
+ */
+static unsigned event_delays_ns[] = {
+	1 * NSEC_PER_MSEC,	/* FOTG210_HRTIMER_POLL_ASS */
+	1 * NSEC_PER_MSEC,	/* FOTG210_HRTIMER_POLL_PSS */
+	1 * NSEC_PER_MSEC,	/* FOTG210_HRTIMER_POLL_DEAD */
+	1125 * NSEC_PER_USEC,	/* FOTG210_HRTIMER_UNLINK_INTR */
+	2 * NSEC_PER_MSEC,	/* FOTG210_HRTIMER_FREE_ITDS */
+	6 * NSEC_PER_MSEC,	/* FOTG210_HRTIMER_ASYNC_UNLINKS */
+	10 * NSEC_PER_MSEC,	/* FOTG210_HRTIMER_IAA_WATCHDOG */
+	10 * NSEC_PER_MSEC,	/* FOTG210_HRTIMER_DISABLE_PERIODIC */
+	15 * NSEC_PER_MSEC,	/* FOTG210_HRTIMER_DISABLE_ASYNC */
+	100 * NSEC_PER_MSEC,	/* FOTG210_HRTIMER_IO_WATCHDOG */
+};
+
+/* Enable a pending hrtimer event */
+static void fotg210_enable_event(struct fotg210_hcd *fotg210, unsigned event,
+		bool resched)
+{
+	ktime_t *timeout = &fotg210->hr_timeouts[event];
+
+	if (resched)
+		*timeout = ktime_add(ktime_get(), event_delays_ns[event]);
+	fotg210->enabled_hrtimer_events |= (1 << event);
+
+	/* Track only the lowest-numbered pending event */
+	if (event < fotg210->next_hrtimer_event) {
+		fotg210->next_hrtimer_event = event;
+		hrtimer_start_range_ns(&fotg210->hrtimer, *timeout,
+				NSEC_PER_MSEC, HRTIMER_MODE_ABS);
+	}
+}
+
+
+/* Poll the STS_ASS status bit; see when it agrees with CMD_ASE */
+static void fotg210_poll_ASS(struct fotg210_hcd *fotg210)
+{
+	unsigned actual, want;
+
+	/* Don't enable anything if the controller isn't running (e.g., died) */
+	if (fotg210->rh_state != FOTG210_RH_RUNNING)
+		return;
+
+	want = (fotg210->command & CMD_ASE) ? STS_ASS : 0;
+	actual = fotg210_readl(fotg210, &fotg210->regs->status) & STS_ASS;
+
+	if (want != actual) {
+
+		/* Poll again later, but give up after about 20 ms */
+		if (fotg210->ASS_poll_count++ < 20) {
+			fotg210_enable_event(fotg210, FOTG210_HRTIMER_POLL_ASS,
+					true);
+			return;
+		}
+		fotg210_dbg(fotg210, "Waited too long for the async schedule status (%x/%x), giving up\n",
+				want, actual);
+	}
+	fotg210->ASS_poll_count = 0;
+
+	/* The status is up-to-date; restart or stop the schedule as needed */
+	if (want == 0) {	/* Stopped */
+		if (fotg210->async_count > 0)
+			fotg210_set_command_bit(fotg210, CMD_ASE);
+
+	} else {		/* Running */
+		if (fotg210->async_count == 0) {
+
+			/* Turn off the schedule after a while */
+			fotg210_enable_event(fotg210,
+					FOTG210_HRTIMER_DISABLE_ASYNC,
+					true);
+		}
+	}
+}
+
+/* Turn off the async schedule after a brief delay */
+static void fotg210_disable_ASE(struct fotg210_hcd *fotg210)
+{
+	fotg210_clear_command_bit(fotg210, CMD_ASE);
+}
+
+
+/* Poll the STS_PSS status bit; see when it agrees with CMD_PSE */
+static void fotg210_poll_PSS(struct fotg210_hcd *fotg210)
+{
+	unsigned actual, want;
+
+	/* Don't do anything if the controller isn't running (e.g., died) */
+	if (fotg210->rh_state != FOTG210_RH_RUNNING)
+		return;
+
+	want = (fotg210->command & CMD_PSE) ? STS_PSS : 0;
+	actual = fotg210_readl(fotg210, &fotg210->regs->status) & STS_PSS;
+
+	if (want != actual) {
+
+		/* Poll again later, but give up after about 20 ms */
+		if (fotg210->PSS_poll_count++ < 20) {
+			fotg210_enable_event(fotg210, FOTG210_HRTIMER_POLL_PSS,
+					true);
+			return;
+		}
+		fotg210_dbg(fotg210, "Waited too long for the periodic schedule status (%x/%x), giving up\n",
+				want, actual);
+	}
+	fotg210->PSS_poll_count = 0;
+
+	/* The status is up-to-date; restart or stop the schedule as needed */
+	if (want == 0) {	/* Stopped */
+		if (fotg210->periodic_count > 0)
+			fotg210_set_command_bit(fotg210, CMD_PSE);
+
+	} else {		/* Running */
+		if (fotg210->periodic_count == 0) {
+
+			/* Turn off the schedule after a while */
+			fotg210_enable_event(fotg210,
+					FOTG210_HRTIMER_DISABLE_PERIODIC,
+					true);
+		}
+	}
+}
+
+/* Turn off the periodic schedule after a brief delay */
+static void fotg210_disable_PSE(struct fotg210_hcd *fotg210)
+{
+	fotg210_clear_command_bit(fotg210, CMD_PSE);
+}
+
+
+/* Poll the STS_HALT status bit; see when a dead controller stops */
+static void fotg210_handle_controller_death(struct fotg210_hcd *fotg210)
+{
+	if (!(fotg210_readl(fotg210, &fotg210->regs->status) & STS_HALT)) {
+
+		/* Give up after a few milliseconds */
+		if (fotg210->died_poll_count++ < 5) {
+			/* Try again later */
+			fotg210_enable_event(fotg210,
+					FOTG210_HRTIMER_POLL_DEAD, true);
+			return;
+		}
+		fotg210_warn(fotg210, "Waited too long for the controller to stop, giving up\n");
+	}
+
+	/* Clean up the mess */
+	fotg210->rh_state = FOTG210_RH_HALTED;
+	fotg210_writel(fotg210, 0, &fotg210->regs->intr_enable);
+	fotg210_work(fotg210);
+	end_unlink_async(fotg210);
+
+	/* Not in process context, so don't try to reset the controller */
+}
+
+
+/* Handle unlinked interrupt QHs once they are gone from the hardware */
+static void fotg210_handle_intr_unlinks(struct fotg210_hcd *fotg210)
+{
+	bool stopped = (fotg210->rh_state < FOTG210_RH_RUNNING);
+
+	/*
+	 * Process all the QHs on the intr_unlink list that were added
+	 * before the current unlink cycle began.  The list is in
+	 * temporal order, so stop when we reach the first entry in the
+	 * current cycle.  But if the root hub isn't running then
+	 * process all the QHs on the list.
+	 */
+	fotg210->intr_unlinking = true;
+	while (fotg210->intr_unlink) {
+		struct fotg210_qh *qh = fotg210->intr_unlink;
+
+		if (!stopped && qh->unlink_cycle == fotg210->intr_unlink_cycle)
+			break;
+		fotg210->intr_unlink = qh->unlink_next;
+		qh->unlink_next = NULL;
+		end_unlink_intr(fotg210, qh);
+	}
+
+	/* Handle remaining entries later */
+	if (fotg210->intr_unlink) {
+		fotg210_enable_event(fotg210, FOTG210_HRTIMER_UNLINK_INTR,
+				true);
+		++fotg210->intr_unlink_cycle;
+	}
+	fotg210->intr_unlinking = false;
+}
+
+
+/* Start another free-iTDs/siTDs cycle */
+static void start_free_itds(struct fotg210_hcd *fotg210)
+{
+	if (!(fotg210->enabled_hrtimer_events &
+			BIT(FOTG210_HRTIMER_FREE_ITDS))) {
+		fotg210->last_itd_to_free = list_entry(
+				fotg210->cached_itd_list.prev,
+				struct fotg210_itd, itd_list);
+		fotg210_enable_event(fotg210, FOTG210_HRTIMER_FREE_ITDS, true);
+	}
+}
+
+/* Wait for controller to stop using old iTDs and siTDs */
+static void end_free_itds(struct fotg210_hcd *fotg210)
+{
+	struct fotg210_itd *itd, *n;
+
+	if (fotg210->rh_state < FOTG210_RH_RUNNING)
+		fotg210->last_itd_to_free = NULL;
+
+	list_for_each_entry_safe(itd, n, &fotg210->cached_itd_list, itd_list) {
+		list_del(&itd->itd_list);
+		dma_pool_free(fotg210->itd_pool, itd, itd->itd_dma);
+		if (itd == fotg210->last_itd_to_free)
+			break;
+	}
+
+	if (!list_empty(&fotg210->cached_itd_list))
+		start_free_itds(fotg210);
+}
+
+
+/* Handle lost (or very late) IAA interrupts */
+static void fotg210_iaa_watchdog(struct fotg210_hcd *fotg210)
+{
+	if (fotg210->rh_state != FOTG210_RH_RUNNING)
+		return;
+
+	/*
+	 * Lost IAA irqs wedge things badly; seen first with a vt8235.
+	 * So we need this watchdog, but must protect it against both
+	 * (a) SMP races against real IAA firing and retriggering, and
+	 * (b) clean HC shutdown, when IAA watchdog was pending.
+	 */
+	if (fotg210->async_iaa) {
+		u32 cmd, status;
+
+		/* If we get here, IAA is *REALLY* late.  It's barely
+		 * conceivable that the system is so busy that CMD_IAAD
+		 * is still legitimately set, so let's be sure it's
+		 * clear before we read STS_IAA.  (The HC should clear
+		 * CMD_IAAD when it sets STS_IAA.)
+		 */
+		cmd = fotg210_readl(fotg210, &fotg210->regs->command);
+
+		/*
+		 * If IAA is set here it either legitimately triggered
+		 * after the watchdog timer expired (_way_ late, so we'll
+		 * still count it as lost) ... or a silicon erratum:
+		 * - VIA seems to set IAA without triggering the IRQ;
+		 * - IAAD potentially cleared without setting IAA.
+		 */
+		status = fotg210_readl(fotg210, &fotg210->regs->status);
+		if ((status & STS_IAA) || !(cmd & CMD_IAAD)) {
+			INCR(fotg210->stats.lost_iaa);
+			fotg210_writel(fotg210, STS_IAA,
+					&fotg210->regs->status);
+		}
+
+		fotg210_dbg(fotg210, "IAA watchdog: status %x cmd %x\n",
+				status, cmd);
+		end_unlink_async(fotg210);
+	}
+}
+
+
+/* Enable the I/O watchdog, if appropriate */
+static void turn_on_io_watchdog(struct fotg210_hcd *fotg210)
+{
+	/* Not needed if the controller isn't running or it's already enabled */
+	if (fotg210->rh_state != FOTG210_RH_RUNNING ||
+			(fotg210->enabled_hrtimer_events &
+			BIT(FOTG210_HRTIMER_IO_WATCHDOG)))
+		return;
+
+	/*
+	 * Isochronous transfers always need the watchdog.
+	 * For other sorts we use it only if the flag is set.
+	 */
+	if (fotg210->isoc_count > 0 || (fotg210->need_io_watchdog &&
+			fotg210->async_count + fotg210->intr_count > 0))
+		fotg210_enable_event(fotg210, FOTG210_HRTIMER_IO_WATCHDOG,
+				true);
+}
+
+
+/* Handler functions for the hrtimer event types.
+ * Keep this array in the same order as the event types indexed by
+ * enum fotg210_hrtimer_event in fotg210.h.
+ */
+static void (*event_handlers[])(struct fotg210_hcd *) = {
+	fotg210_poll_ASS,			/* FOTG210_HRTIMER_POLL_ASS */
+	fotg210_poll_PSS,			/* FOTG210_HRTIMER_POLL_PSS */
+	fotg210_handle_controller_death,	/* FOTG210_HRTIMER_POLL_DEAD */
+	fotg210_handle_intr_unlinks,	/* FOTG210_HRTIMER_UNLINK_INTR */
+	end_free_itds,			/* FOTG210_HRTIMER_FREE_ITDS */
+	unlink_empty_async,		/* FOTG210_HRTIMER_ASYNC_UNLINKS */
+	fotg210_iaa_watchdog,		/* FOTG210_HRTIMER_IAA_WATCHDOG */
+	fotg210_disable_PSE,		/* FOTG210_HRTIMER_DISABLE_PERIODIC */
+	fotg210_disable_ASE,		/* FOTG210_HRTIMER_DISABLE_ASYNC */
+	fotg210_work,			/* FOTG210_HRTIMER_IO_WATCHDOG */
+};
+
+static enum hrtimer_restart fotg210_hrtimer_func(struct hrtimer *t)
+{
+	struct fotg210_hcd *fotg210 =
+			container_of(t, struct fotg210_hcd, hrtimer);
+	ktime_t now;
+	unsigned long events;
+	unsigned long flags;
+	unsigned e;
+
+	spin_lock_irqsave(&fotg210->lock, flags);
+
+	events = fotg210->enabled_hrtimer_events;
+	fotg210->enabled_hrtimer_events = 0;
+	fotg210->next_hrtimer_event = FOTG210_HRTIMER_NO_EVENT;
+
+	/*
+	 * Check each pending event.  If its time has expired, handle
+	 * the event; otherwise re-enable it.
+	 */
+	now = ktime_get();
+	for_each_set_bit(e, &events, FOTG210_HRTIMER_NUM_EVENTS) {
+		if (ktime_compare(now, fotg210->hr_timeouts[e]) >= 0)
+			event_handlers[e](fotg210);
+		else
+			fotg210_enable_event(fotg210, e, false);
+	}
+
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+	return HRTIMER_NORESTART;
+}
+
+#define fotg210_bus_suspend NULL
+#define fotg210_bus_resume NULL
+
+static int check_reset_complete(struct fotg210_hcd *fotg210, int index,
+		u32 __iomem *status_reg, int port_status)
+{
+	if (!(port_status & PORT_CONNECT))
+		return port_status;
+
+	/* if reset finished and it's still not enabled -- handoff */
+	if (!(port_status & PORT_PE))
+		/* with integrated TT, there's nobody to hand it to! */
+		fotg210_dbg(fotg210, "Failed to enable port %d on root hub TT\n",
+				index + 1);
+	else
+		fotg210_dbg(fotg210, "port %d reset complete, port enabled\n",
+				index + 1);
+
+	return port_status;
+}
+
+
+/* build "status change" packet (one or two bytes) from HC registers */
+
+static int fotg210_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
+	u32 temp, status;
+	u32 mask;
+	int retval = 1;
+	unsigned long flags;
+
+	/* init status to no-changes */
+	buf[0] = 0;
+
+	/* Inform the core about resumes-in-progress by returning
+	 * a non-zero value even if there are no status changes.
+	 */
+	status = fotg210->resuming_ports;
+
+	mask = PORT_CSC | PORT_PEC;
+	/* PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND */
+
+	/* no hub change reports (bit 0) for now (power, ...) */
+
+	/* port N changes (bit N)? */
+	spin_lock_irqsave(&fotg210->lock, flags);
+
+	temp = fotg210_readl(fotg210, &fotg210->regs->port_status);
+
+	/*
+	 * Return status information even for ports with OWNER set.
+	 * Otherwise hub_wq wouldn't see the disconnect event when a
+	 * high-speed device is switched over to the companion
+	 * controller by the user.
+	 */
+
+	if ((temp & mask) != 0 || test_bit(0, &fotg210->port_c_suspend) ||
+			(fotg210->reset_done[0] &&
+			time_after_eq(jiffies, fotg210->reset_done[0]))) {
+		buf[0] |= 1 << 1;
+		status = STS_PCD;
+	}
+	/* FIXME autosuspend idle root hubs */
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+	return status ? retval : 0;
+}
+
+static void fotg210_hub_descriptor(struct fotg210_hcd *fotg210,
+		struct usb_hub_descriptor *desc)
+{
+	int ports = HCS_N_PORTS(fotg210->hcs_params);
+	u16 temp;
+
+	desc->bDescriptorType = USB_DT_HUB;
+	desc->bPwrOn2PwrGood = 10;	/* fotg210 1.0, 2.3.9 says 20ms max */
+	desc->bHubContrCurrent = 0;
+
+	desc->bNbrPorts = ports;
+	temp = 1 + (ports / 8);
+	desc->bDescLength = 7 + 2 * temp;
+
+	/* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+	memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
+	memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
+
+	temp = HUB_CHAR_INDV_PORT_OCPM;	/* per-port overcurrent reporting */
+	temp |= HUB_CHAR_NO_LPSM;	/* no power switching */
+	desc->wHubCharacteristics = cpu_to_le16(temp);
+}
+
+static int fotg210_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+		u16 wIndex, char *buf, u16 wLength)
+{
+	struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
+	int ports = HCS_N_PORTS(fotg210->hcs_params);
+	u32 __iomem *status_reg = &fotg210->regs->port_status;
+	u32 temp, temp1, status;
+	unsigned long flags;
+	int retval = 0;
+	unsigned selector;
+
+	/*
+	 * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
+	 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
+	 * (track current state ourselves) ... blink for diagnostics,
+	 * power, "this is the one", etc.  EHCI spec supports this.
+	 */
+
+	spin_lock_irqsave(&fotg210->lock, flags);
+	switch (typeReq) {
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* no hub-wide feature/status flags */
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		temp = fotg210_readl(fotg210, status_reg);
+		temp &= ~PORT_RWC_BITS;
+
+		/*
+		 * Even if OWNER is set, so the port is owned by the
+		 * companion controller, hub_wq needs to be able to clear
+		 * the port-change status bits (especially
+		 * USB_PORT_STAT_C_CONNECTION).
+		 */
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			fotg210_writel(fotg210, temp & ~PORT_PE, status_reg);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			fotg210_writel(fotg210, temp | PORT_PEC, status_reg);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			if (temp & PORT_RESET)
+				goto error;
+			if (!(temp & PORT_SUSPEND))
+				break;
+			if ((temp & PORT_PE) == 0)
+				goto error;
+
+			/* resume signaling for 20 msec */
+			fotg210_writel(fotg210, temp | PORT_RESUME, status_reg);
+			fotg210->reset_done[wIndex] = jiffies
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			clear_bit(wIndex, &fotg210->port_c_suspend);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			fotg210_writel(fotg210, temp | PORT_CSC, status_reg);
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			fotg210_writel(fotg210, temp | OTGISR_OVC,
+					&fotg210->regs->otgisr);
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			/* GetPortStatus clears reset */
+			break;
+		default:
+			goto error;
+		}
+		fotg210_readl(fotg210, &fotg210->regs->command);
+		break;
+	case GetHubDescriptor:
+		fotg210_hub_descriptor(fotg210, (struct usb_hub_descriptor *)
+				buf);
+		break;
+	case GetHubStatus:
+		/* no hub-wide feature/status flags */
+		memset(buf, 0, 4);
+		/*cpu_to_le32s ((u32 *) buf); */
+		break;
+	case GetPortStatus:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		status = 0;
+		temp = fotg210_readl(fotg210, status_reg);
+
+		/* wPortChange bits */
+		if (temp & PORT_CSC)
+			status |= USB_PORT_STAT_C_CONNECTION << 16;
+		if (temp & PORT_PEC)
+			status |= USB_PORT_STAT_C_ENABLE << 16;
+
+		temp1 = fotg210_readl(fotg210, &fotg210->regs->otgisr);
+		if (temp1 & OTGISR_OVC)
+			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
+
+		/* whoever resumes must GetPortStatus to complete it!! */
+		if (temp & PORT_RESUME) {
+
+			/* Remote Wakeup received? */
+			if (!fotg210->reset_done[wIndex]) {
+				/* resume signaling for 20 msec */
+				fotg210->reset_done[wIndex] = jiffies
+						+ msecs_to_jiffies(20);
+				/* check the port again */
+				mod_timer(&fotg210_to_hcd(fotg210)->rh_timer,
+						fotg210->reset_done[wIndex]);
+			}
+
+			/* resume completed? */
+			else if (time_after_eq(jiffies,
+					fotg210->reset_done[wIndex])) {
+				clear_bit(wIndex, &fotg210->suspended_ports);
+				set_bit(wIndex, &fotg210->port_c_suspend);
+				fotg210->reset_done[wIndex] = 0;
+
+				/* stop resume signaling */
+				temp = fotg210_readl(fotg210, status_reg);
+				fotg210_writel(fotg210, temp &
+						~(PORT_RWC_BITS | PORT_RESUME),
+						status_reg);
+				clear_bit(wIndex, &fotg210->resuming_ports);
+				retval = handshake(fotg210, status_reg,
+						PORT_RESUME, 0, 2000);/* 2ms */
+				if (retval != 0) {
+					fotg210_err(fotg210,
+							"port %d resume error %d\n",
+							wIndex + 1, retval);
+					goto error;
+				}
+				temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
+			}
+		}
+
+		/* whoever resets must GetPortStatus to complete it!! */
+		if ((temp & PORT_RESET) && time_after_eq(jiffies,
+				fotg210->reset_done[wIndex])) {
+			status |= USB_PORT_STAT_C_RESET << 16;
+			fotg210->reset_done[wIndex] = 0;
+			clear_bit(wIndex, &fotg210->resuming_ports);
+
+			/* force reset to complete */
+			fotg210_writel(fotg210,
+					temp & ~(PORT_RWC_BITS | PORT_RESET),
+					status_reg);
+			/* REVISIT:  some hardware needs 550+ usec to clear
+			 * this bit; seems too long to spin routinely...
+			 */
+			retval = handshake(fotg210, status_reg,
+					PORT_RESET, 0, 1000);
+			if (retval != 0) {
+				fotg210_err(fotg210, "port %d reset error %d\n",
+						wIndex + 1, retval);
+				goto error;
+			}
+
+			/* see what we found out */
+			temp = check_reset_complete(fotg210, wIndex, status_reg,
+					fotg210_readl(fotg210, status_reg));
+
+			/* restart schedule */
+			fotg210->command |= CMD_RUN;
+			fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command);
+		}
+
+		if (!(temp & (PORT_RESUME|PORT_RESET))) {
+			fotg210->reset_done[wIndex] = 0;
+			clear_bit(wIndex, &fotg210->resuming_ports);
+		}
+
+		/* transfer dedicated ports to the companion hc */
+		if ((temp & PORT_CONNECT) &&
+				test_bit(wIndex, &fotg210->companion_ports)) {
+			temp &= ~PORT_RWC_BITS;
+			fotg210_writel(fotg210, temp, status_reg);
+			fotg210_dbg(fotg210, "port %d --> companion\n",
+					wIndex + 1);
+			temp = fotg210_readl(fotg210, status_reg);
+		}
+
+		/*
+		 * Even if OWNER is set, there's no harm letting hub_wq
+		 * see the wPortStatus values (they should all be 0 except
+		 * for PORT_POWER anyway).
+		 */
+
+		if (temp & PORT_CONNECT) {
+			status |= USB_PORT_STAT_CONNECTION;
+			status |= fotg210_port_speed(fotg210, temp);
+		}
+		if (temp & PORT_PE)
+			status |= USB_PORT_STAT_ENABLE;
+
+		/* maybe the port was unsuspended without our knowledge */
+		if (temp & (PORT_SUSPEND|PORT_RESUME)) {
+			status |= USB_PORT_STAT_SUSPEND;
+		} else if (test_bit(wIndex, &fotg210->suspended_ports)) {
+			clear_bit(wIndex, &fotg210->suspended_ports);
+			clear_bit(wIndex, &fotg210->resuming_ports);
+			fotg210->reset_done[wIndex] = 0;
+			if (temp & PORT_PE)
+				set_bit(wIndex, &fotg210->port_c_suspend);
+		}
+
+		temp1 = fotg210_readl(fotg210, &fotg210->regs->otgisr);
+		if (temp1 & OTGISR_OVC)
+			status |= USB_PORT_STAT_OVERCURRENT;
+		if (temp & PORT_RESET)
+			status |= USB_PORT_STAT_RESET;
+		if (test_bit(wIndex, &fotg210->port_c_suspend))
+			status |= USB_PORT_STAT_C_SUSPEND << 16;
+
+		if (status & ~0xffff)	/* only if wPortChange is interesting */
+			dbg_port(fotg210, "GetStatus", wIndex + 1, temp);
+		put_unaligned_le32(status, buf);
+		break;
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* no hub-wide feature/status flags */
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetPortFeature:
+		selector = wIndex >> 8;
+		wIndex &= 0xff;
+
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		temp = fotg210_readl(fotg210, status_reg);
+		temp &= ~PORT_RWC_BITS;
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			if ((temp & PORT_PE) == 0
+					|| (temp & PORT_RESET) != 0)
+				goto error;
+
+			/* After above check the port must be connected.
+			 * Set appropriate bit thus could put phy into low power
+			 * mode if we have hostpc feature
+			 */
+			fotg210_writel(fotg210, temp | PORT_SUSPEND,
+					status_reg);
+			set_bit(wIndex, &fotg210->suspended_ports);
+			break;
+		case USB_PORT_FEAT_RESET:
+			if (temp & PORT_RESUME)
+				goto error;
+			/* line status bits may report this as low speed,
+			 * which can be fine if this root hub has a
+			 * transaction translator built in.
+			 */
+			fotg210_dbg(fotg210, "port %d reset\n", wIndex + 1);
+			temp |= PORT_RESET;
+			temp &= ~PORT_PE;
+
+			/*
+			 * caller must wait, then call GetPortStatus
+			 * usb 2.0 spec says 50 ms resets on root
+			 */
+			fotg210->reset_done[wIndex] = jiffies
+					+ msecs_to_jiffies(50);
+			fotg210_writel(fotg210, temp, status_reg);
+			break;
+
+		/* For downstream facing ports (these):  one hub port is put
+		 * into test mode according to USB2 11.24.2.13, then the hub
+		 * must be reset (which for root hub now means rmmod+modprobe,
+		 * or else system reboot).  See EHCI 2.3.9 and 4.14 for info
+		 * about the EHCI-specific stuff.
+		 */
+		case USB_PORT_FEAT_TEST:
+			if (!selector || selector > 5)
+				goto error;
+			spin_unlock_irqrestore(&fotg210->lock, flags);
+			fotg210_quiesce(fotg210);
+			spin_lock_irqsave(&fotg210->lock, flags);
+
+			/* Put all enabled ports into suspend */
+			temp = fotg210_readl(fotg210, status_reg) &
+				~PORT_RWC_BITS;
+			if (temp & PORT_PE)
+				fotg210_writel(fotg210, temp | PORT_SUSPEND,
+						status_reg);
+
+			spin_unlock_irqrestore(&fotg210->lock, flags);
+			fotg210_halt(fotg210);
+			spin_lock_irqsave(&fotg210->lock, flags);
+
+			temp = fotg210_readl(fotg210, status_reg);
+			temp |= selector << 16;
+			fotg210_writel(fotg210, temp, status_reg);
+			break;
+
+		default:
+			goto error;
+		}
+		fotg210_readl(fotg210, &fotg210->regs->command);
+		break;
+
+	default:
+error:
+		/* "stall" on error */
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+	return retval;
+}
+
+static void __maybe_unused fotg210_relinquish_port(struct usb_hcd *hcd,
+		int portnum)
+{
+	return;
+}
+
+static int __maybe_unused fotg210_port_handed_over(struct usb_hcd *hcd,
+		int portnum)
+{
+	return 0;
+}
+
+/* There's basically three types of memory:
+ *	- data used only by the HCD ... kmalloc is fine
+ *	- async and periodic schedules, shared by HC and HCD ... these
+ *	  need to use dma_pool or dma_alloc_coherent
+ *	- driver buffers, read/written by HC ... single shot DMA mapped
+ *
+ * There's also "register" data (e.g. PCI or SOC), which is memory mapped.
+ * No memory seen by this driver is pageable.
+ */
+
+/* Allocate the key transfer structures from the previously allocated pool */
+static inline void fotg210_qtd_init(struct fotg210_hcd *fotg210,
+		struct fotg210_qtd *qtd, dma_addr_t dma)
+{
+	memset(qtd, 0, sizeof(*qtd));
+	qtd->qtd_dma = dma;
+	qtd->hw_token = cpu_to_hc32(fotg210, QTD_STS_HALT);
+	qtd->hw_next = FOTG210_LIST_END(fotg210);
+	qtd->hw_alt_next = FOTG210_LIST_END(fotg210);
+	INIT_LIST_HEAD(&qtd->qtd_list);
+}
+
+static struct fotg210_qtd *fotg210_qtd_alloc(struct fotg210_hcd *fotg210,
+		gfp_t flags)
+{
+	struct fotg210_qtd *qtd;
+	dma_addr_t dma;
+
+	qtd = dma_pool_alloc(fotg210->qtd_pool, flags, &dma);
+	if (qtd != NULL)
+		fotg210_qtd_init(fotg210, qtd, dma);
+
+	return qtd;
+}
+
+static inline void fotg210_qtd_free(struct fotg210_hcd *fotg210,
+		struct fotg210_qtd *qtd)
+{
+	dma_pool_free(fotg210->qtd_pool, qtd, qtd->qtd_dma);
+}
+
+
+static void qh_destroy(struct fotg210_hcd *fotg210, struct fotg210_qh *qh)
+{
+	/* clean qtds first, and know this is not linked */
+	if (!list_empty(&qh->qtd_list) || qh->qh_next.ptr) {
+		fotg210_dbg(fotg210, "unused qh not empty!\n");
+		BUG();
+	}
+	if (qh->dummy)
+		fotg210_qtd_free(fotg210, qh->dummy);
+	dma_pool_free(fotg210->qh_pool, qh->hw, qh->qh_dma);
+	kfree(qh);
+}
+
+static struct fotg210_qh *fotg210_qh_alloc(struct fotg210_hcd *fotg210,
+		gfp_t flags)
+{
+	struct fotg210_qh *qh;
+	dma_addr_t dma;
+
+	qh = kzalloc(sizeof(*qh), GFP_ATOMIC);
+	if (!qh)
+		goto done;
+	qh->hw = (struct fotg210_qh_hw *)
+		dma_pool_zalloc(fotg210->qh_pool, flags, &dma);
+	if (!qh->hw)
+		goto fail;
+	qh->qh_dma = dma;
+	INIT_LIST_HEAD(&qh->qtd_list);
+
+	/* dummy td enables safe urb queuing */
+	qh->dummy = fotg210_qtd_alloc(fotg210, flags);
+	if (qh->dummy == NULL) {
+		fotg210_dbg(fotg210, "no dummy td\n");
+		goto fail1;
+	}
+done:
+	return qh;
+fail1:
+	dma_pool_free(fotg210->qh_pool, qh->hw, qh->qh_dma);
+fail:
+	kfree(qh);
+	return NULL;
+}
+
+/* The queue heads and transfer descriptors are managed from pools tied
+ * to each of the "per device" structures.
+ * This is the initialisation and cleanup code.
+ */
+
+static void fotg210_mem_cleanup(struct fotg210_hcd *fotg210)
+{
+	if (fotg210->async)
+		qh_destroy(fotg210, fotg210->async);
+	fotg210->async = NULL;
+
+	if (fotg210->dummy)
+		qh_destroy(fotg210, fotg210->dummy);
+	fotg210->dummy = NULL;
+
+	/* DMA consistent memory and pools */
+	dma_pool_destroy(fotg210->qtd_pool);
+	fotg210->qtd_pool = NULL;
+
+	dma_pool_destroy(fotg210->qh_pool);
+	fotg210->qh_pool = NULL;
+
+	dma_pool_destroy(fotg210->itd_pool);
+	fotg210->itd_pool = NULL;
+
+	if (fotg210->periodic)
+		dma_free_coherent(fotg210_to_hcd(fotg210)->self.controller,
+				fotg210->periodic_size * sizeof(u32),
+				fotg210->periodic, fotg210->periodic_dma);
+	fotg210->periodic = NULL;
+
+	/* shadow periodic table */
+	kfree(fotg210->pshadow);
+	fotg210->pshadow = NULL;
+}
+
+/* remember to add cleanup code (above) if you add anything here */
+static int fotg210_mem_init(struct fotg210_hcd *fotg210, gfp_t flags)
+{
+	int i;
+
+	/* QTDs for control/bulk/intr transfers */
+	fotg210->qtd_pool = dma_pool_create("fotg210_qtd",
+			fotg210_to_hcd(fotg210)->self.controller,
+			sizeof(struct fotg210_qtd),
+			32 /* byte alignment (for hw parts) */,
+			4096 /* can't cross 4K */);
+	if (!fotg210->qtd_pool)
+		goto fail;
+
+	/* QHs for control/bulk/intr transfers */
+	fotg210->qh_pool = dma_pool_create("fotg210_qh",
+			fotg210_to_hcd(fotg210)->self.controller,
+			sizeof(struct fotg210_qh_hw),
+			32 /* byte alignment (for hw parts) */,
+			4096 /* can't cross 4K */);
+	if (!fotg210->qh_pool)
+		goto fail;
+
+	fotg210->async = fotg210_qh_alloc(fotg210, flags);
+	if (!fotg210->async)
+		goto fail;
+
+	/* ITD for high speed ISO transfers */
+	fotg210->itd_pool = dma_pool_create("fotg210_itd",
+			fotg210_to_hcd(fotg210)->self.controller,
+			sizeof(struct fotg210_itd),
+			64 /* byte alignment (for hw parts) */,
+			4096 /* can't cross 4K */);
+	if (!fotg210->itd_pool)
+		goto fail;
+
+	/* Hardware periodic table */
+	fotg210->periodic =
+		dma_alloc_coherent(fotg210_to_hcd(fotg210)->self.controller,
+				fotg210->periodic_size * sizeof(__le32),
+				&fotg210->periodic_dma, 0);
+	if (fotg210->periodic == NULL)
+		goto fail;
+
+	for (i = 0; i < fotg210->periodic_size; i++)
+		fotg210->periodic[i] = FOTG210_LIST_END(fotg210);
+
+	/* software shadow of hardware table */
+	fotg210->pshadow = kcalloc(fotg210->periodic_size, sizeof(void *),
+			flags);
+	if (fotg210->pshadow != NULL)
+		return 0;
+
+fail:
+	fotg210_dbg(fotg210, "couldn't init memory\n");
+	fotg210_mem_cleanup(fotg210);
+	return -ENOMEM;
+}
+/* EHCI hardware queue manipulation ... the core.  QH/QTD manipulation.
+ *
+ * Control, bulk, and interrupt traffic all use "qh" lists.  They list "qtd"
+ * entries describing USB transactions, max 16-20kB/entry (with 4kB-aligned
+ * buffers needed for the larger number).  We use one QH per endpoint, queue
+ * multiple urbs (all three types) per endpoint.  URBs may need several qtds.
+ *
+ * ISO traffic uses "ISO TD" (itd) records, and (along with
+ * interrupts) needs careful scheduling.  Performance improvements can be
+ * an ongoing challenge.  That's in "ehci-sched.c".
+ *
+ * USB 1.1 devices are handled (a) by "companion" OHCI or UHCI root hubs,
+ * or otherwise through transaction translators (TTs) in USB 2.0 hubs using
+ * (b) special fields in qh entries or (c) split iso entries.  TTs will
+ * buffer low/full speed data so the host collects it at high speed.
+ */
+
+/* fill a qtd, returning how much of the buffer we were able to queue up */
+static int qtd_fill(struct fotg210_hcd *fotg210, struct fotg210_qtd *qtd,
+		dma_addr_t buf, size_t len, int token, int maxpacket)
+{
+	int i, count;
+	u64 addr = buf;
+
+	/* one buffer entry per 4K ... first might be short or unaligned */
+	qtd->hw_buf[0] = cpu_to_hc32(fotg210, (u32)addr);
+	qtd->hw_buf_hi[0] = cpu_to_hc32(fotg210, (u32)(addr >> 32));
+	count = 0x1000 - (buf & 0x0fff);	/* rest of that page */
+	if (likely(len < count))		/* ... iff needed */
+		count = len;
+	else {
+		buf +=  0x1000;
+		buf &= ~0x0fff;
+
+		/* per-qtd limit: from 16K to 20K (best alignment) */
+		for (i = 1; count < len && i < 5; i++) {
+			addr = buf;
+			qtd->hw_buf[i] = cpu_to_hc32(fotg210, (u32)addr);
+			qtd->hw_buf_hi[i] = cpu_to_hc32(fotg210,
+					(u32)(addr >> 32));
+			buf += 0x1000;
+			if ((count + 0x1000) < len)
+				count += 0x1000;
+			else
+				count = len;
+		}
+
+		/* short packets may only terminate transfers */
+		if (count != len)
+			count -= (count % maxpacket);
+	}
+	qtd->hw_token = cpu_to_hc32(fotg210, (count << 16) | token);
+	qtd->length = count;
+
+	return count;
+}
+
+static inline void qh_update(struct fotg210_hcd *fotg210,
+		struct fotg210_qh *qh, struct fotg210_qtd *qtd)
+{
+	struct fotg210_qh_hw *hw = qh->hw;
+
+	/* writes to an active overlay are unsafe */
+	BUG_ON(qh->qh_state != QH_STATE_IDLE);
+
+	hw->hw_qtd_next = QTD_NEXT(fotg210, qtd->qtd_dma);
+	hw->hw_alt_next = FOTG210_LIST_END(fotg210);
+
+	/* Except for control endpoints, we make hardware maintain data
+	 * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
+	 * and set the pseudo-toggle in udev. Only usb_clear_halt() will
+	 * ever clear it.
+	 */
+	if (!(hw->hw_info1 & cpu_to_hc32(fotg210, QH_TOGGLE_CTL))) {
+		unsigned is_out, epnum;
+
+		is_out = qh->is_out;
+		epnum = (hc32_to_cpup(fotg210, &hw->hw_info1) >> 8) & 0x0f;
+		if (unlikely(!usb_gettoggle(qh->dev, epnum, is_out))) {
+			hw->hw_token &= ~cpu_to_hc32(fotg210, QTD_TOGGLE);
+			usb_settoggle(qh->dev, epnum, is_out, 1);
+		}
+	}
+
+	hw->hw_token &= cpu_to_hc32(fotg210, QTD_TOGGLE | QTD_STS_PING);
+}
+
+/* if it weren't for a common silicon quirk (writing the dummy into the qh
+ * overlay, so qh->hw_token wrongly becomes inactive/halted), only fault
+ * recovery (including urb dequeue) would need software changes to a QH...
+ */
+static void qh_refresh(struct fotg210_hcd *fotg210, struct fotg210_qh *qh)
+{
+	struct fotg210_qtd *qtd;
+
+	if (list_empty(&qh->qtd_list))
+		qtd = qh->dummy;
+	else {
+		qtd = list_entry(qh->qtd_list.next,
+				struct fotg210_qtd, qtd_list);
+		/*
+		 * first qtd may already be partially processed.
+		 * If we come here during unlink, the QH overlay region
+		 * might have reference to the just unlinked qtd. The
+		 * qtd is updated in qh_completions(). Update the QH
+		 * overlay here.
+		 */
+		if (cpu_to_hc32(fotg210, qtd->qtd_dma) == qh->hw->hw_current) {
+			qh->hw->hw_qtd_next = qtd->hw_next;
+			qtd = NULL;
+		}
+	}
+
+	if (qtd)
+		qh_update(fotg210, qh, qtd);
+}
+
+static void qh_link_async(struct fotg210_hcd *fotg210, struct fotg210_qh *qh);
+
+static void fotg210_clear_tt_buffer_complete(struct usb_hcd *hcd,
+		struct usb_host_endpoint *ep)
+{
+	struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
+	struct fotg210_qh *qh = ep->hcpriv;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fotg210->lock, flags);
+	qh->clearing_tt = 0;
+	if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list)
+			&& fotg210->rh_state == FOTG210_RH_RUNNING)
+		qh_link_async(fotg210, qh);
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+}
+
+static void fotg210_clear_tt_buffer(struct fotg210_hcd *fotg210,
+		struct fotg210_qh *qh, struct urb *urb, u32 token)
+{
+
+	/* If an async split transaction gets an error or is unlinked,
+	 * the TT buffer may be left in an indeterminate state.  We
+	 * have to clear the TT buffer.
+	 *
+	 * Note: this routine is never called for Isochronous transfers.
+	 */
+	if (urb->dev->tt && !usb_pipeint(urb->pipe) && !qh->clearing_tt) {
+		struct usb_device *tt = urb->dev->tt->hub;
+
+		dev_dbg(&tt->dev,
+				"clear tt buffer port %d, a%d ep%d t%08x\n",
+				urb->dev->ttport, urb->dev->devnum,
+				usb_pipeendpoint(urb->pipe), token);
+
+		if (urb->dev->tt->hub !=
+				fotg210_to_hcd(fotg210)->self.root_hub) {
+			if (usb_hub_clear_tt_buffer(urb) == 0)
+				qh->clearing_tt = 1;
+		}
+	}
+}
+
+static int qtd_copy_status(struct fotg210_hcd *fotg210, struct urb *urb,
+		size_t length, u32 token)
+{
+	int status = -EINPROGRESS;
+
+	/* count IN/OUT bytes, not SETUP (even short packets) */
+	if (likely(QTD_PID(token) != 2))
+		urb->actual_length += length - QTD_LENGTH(token);
+
+	/* don't modify error codes */
+	if (unlikely(urb->unlinked))
+		return status;
+
+	/* force cleanup after short read; not always an error */
+	if (unlikely(IS_SHORT_READ(token)))
+		status = -EREMOTEIO;
+
+	/* serious "can't proceed" faults reported by the hardware */
+	if (token & QTD_STS_HALT) {
+		if (token & QTD_STS_BABBLE) {
+			/* FIXME "must" disable babbling device's port too */
+			status = -EOVERFLOW;
+		/* CERR nonzero + halt --> stall */
+		} else if (QTD_CERR(token)) {
+			status = -EPIPE;
+
+		/* In theory, more than one of the following bits can be set
+		 * since they are sticky and the transaction is retried.
+		 * Which to test first is rather arbitrary.
+		 */
+		} else if (token & QTD_STS_MMF) {
+			/* fs/ls interrupt xfer missed the complete-split */
+			status = -EPROTO;
+		} else if (token & QTD_STS_DBE) {
+			status = (QTD_PID(token) == 1) /* IN ? */
+				? -ENOSR  /* hc couldn't read data */
+				: -ECOMM; /* hc couldn't write data */
+		} else if (token & QTD_STS_XACT) {
+			/* timeout, bad CRC, wrong PID, etc */
+			fotg210_dbg(fotg210, "devpath %s ep%d%s 3strikes\n",
+					urb->dev->devpath,
+					usb_pipeendpoint(urb->pipe),
+					usb_pipein(urb->pipe) ? "in" : "out");
+			status = -EPROTO;
+		} else {	/* unknown */
+			status = -EPROTO;
+		}
+
+		fotg210_dbg(fotg210,
+				"dev%d ep%d%s qtd token %08x --> status %d\n",
+				usb_pipedevice(urb->pipe),
+				usb_pipeendpoint(urb->pipe),
+				usb_pipein(urb->pipe) ? "in" : "out",
+				token, status);
+	}
+
+	return status;
+}
+
+static void fotg210_urb_done(struct fotg210_hcd *fotg210, struct urb *urb,
+		int status)
+__releases(fotg210->lock)
+__acquires(fotg210->lock)
+{
+	if (likely(urb->hcpriv != NULL)) {
+		struct fotg210_qh *qh = (struct fotg210_qh *) urb->hcpriv;
+
+		/* S-mask in a QH means it's an interrupt urb */
+		if ((qh->hw->hw_info2 & cpu_to_hc32(fotg210, QH_SMASK)) != 0) {
+
+			/* ... update hc-wide periodic stats (for usbfs) */
+			fotg210_to_hcd(fotg210)->self.bandwidth_int_reqs--;
+		}
+	}
+
+	if (unlikely(urb->unlinked)) {
+		INCR(fotg210->stats.unlink);
+	} else {
+		/* report non-error and short read status as zero */
+		if (status == -EINPROGRESS || status == -EREMOTEIO)
+			status = 0;
+		INCR(fotg210->stats.complete);
+	}
+
+#ifdef FOTG210_URB_TRACE
+	fotg210_dbg(fotg210,
+			"%s %s urb %p ep%d%s status %d len %d/%d\n",
+			__func__, urb->dev->devpath, urb,
+			usb_pipeendpoint(urb->pipe),
+			usb_pipein(urb->pipe) ? "in" : "out",
+			status,
+			urb->actual_length, urb->transfer_buffer_length);
+#endif
+
+	/* complete() can reenter this HCD */
+	usb_hcd_unlink_urb_from_ep(fotg210_to_hcd(fotg210), urb);
+	spin_unlock(&fotg210->lock);
+	usb_hcd_giveback_urb(fotg210_to_hcd(fotg210), urb, status);
+	spin_lock(&fotg210->lock);
+}
+
+static int qh_schedule(struct fotg210_hcd *fotg210, struct fotg210_qh *qh);
+
+/* Process and free completed qtds for a qh, returning URBs to drivers.
+ * Chases up to qh->hw_current.  Returns number of completions called,
+ * indicating how much "real" work we did.
+ */
+static unsigned qh_completions(struct fotg210_hcd *fotg210,
+		struct fotg210_qh *qh)
+{
+	struct fotg210_qtd *last, *end = qh->dummy;
+	struct fotg210_qtd *qtd, *tmp;
+	int last_status;
+	int stopped;
+	unsigned count = 0;
+	u8 state;
+	struct fotg210_qh_hw *hw = qh->hw;
+
+	if (unlikely(list_empty(&qh->qtd_list)))
+		return count;
+
+	/* completions (or tasks on other cpus) must never clobber HALT
+	 * till we've gone through and cleaned everything up, even when
+	 * they add urbs to this qh's queue or mark them for unlinking.
+	 *
+	 * NOTE:  unlinking expects to be done in queue order.
+	 *
+	 * It's a bug for qh->qh_state to be anything other than
+	 * QH_STATE_IDLE, unless our caller is scan_async() or
+	 * scan_intr().
+	 */
+	state = qh->qh_state;
+	qh->qh_state = QH_STATE_COMPLETING;
+	stopped = (state == QH_STATE_IDLE);
+
+rescan:
+	last = NULL;
+	last_status = -EINPROGRESS;
+	qh->needs_rescan = 0;
+
+	/* remove de-activated QTDs from front of queue.
+	 * after faults (including short reads), cleanup this urb
+	 * then let the queue advance.
+	 * if queue is stopped, handles unlinks.
+	 */
+	list_for_each_entry_safe(qtd, tmp, &qh->qtd_list, qtd_list) {
+		struct urb *urb;
+		u32 token = 0;
+
+		urb = qtd->urb;
+
+		/* clean up any state from previous QTD ...*/
+		if (last) {
+			if (likely(last->urb != urb)) {
+				fotg210_urb_done(fotg210, last->urb,
+						last_status);
+				count++;
+				last_status = -EINPROGRESS;
+			}
+			fotg210_qtd_free(fotg210, last);
+			last = NULL;
+		}
+
+		/* ignore urbs submitted during completions we reported */
+		if (qtd == end)
+			break;
+
+		/* hardware copies qtd out of qh overlay */
+		rmb();
+		token = hc32_to_cpu(fotg210, qtd->hw_token);
+
+		/* always clean up qtds the hc de-activated */
+retry_xacterr:
+		if ((token & QTD_STS_ACTIVE) == 0) {
+
+			/* Report Data Buffer Error: non-fatal but useful */
+			if (token & QTD_STS_DBE)
+				fotg210_dbg(fotg210,
+					"detected DataBufferErr for urb %p ep%d%s len %d, qtd %p [qh %p]\n",
+					urb, usb_endpoint_num(&urb->ep->desc),
+					usb_endpoint_dir_in(&urb->ep->desc)
+						? "in" : "out",
+					urb->transfer_buffer_length, qtd, qh);
+
+			/* on STALL, error, and short reads this urb must
+			 * complete and all its qtds must be recycled.
+			 */
+			if ((token & QTD_STS_HALT) != 0) {
+
+				/* retry transaction errors until we
+				 * reach the software xacterr limit
+				 */
+				if ((token & QTD_STS_XACT) &&
+						QTD_CERR(token) == 0 &&
+						++qh->xacterrs < QH_XACTERR_MAX &&
+						!urb->unlinked) {
+					fotg210_dbg(fotg210,
+						"detected XactErr len %zu/%zu retry %d\n",
+						qtd->length - QTD_LENGTH(token),
+						qtd->length,
+						qh->xacterrs);
+
+					/* reset the token in the qtd and the
+					 * qh overlay (which still contains
+					 * the qtd) so that we pick up from
+					 * where we left off
+					 */
+					token &= ~QTD_STS_HALT;
+					token |= QTD_STS_ACTIVE |
+						 (FOTG210_TUNE_CERR << 10);
+					qtd->hw_token = cpu_to_hc32(fotg210,
+							token);
+					wmb();
+					hw->hw_token = cpu_to_hc32(fotg210,
+							token);
+					goto retry_xacterr;
+				}
+				stopped = 1;
+
+			/* magic dummy for some short reads; qh won't advance.
+			 * that silicon quirk can kick in with this dummy too.
+			 *
+			 * other short reads won't stop the queue, including
+			 * control transfers (status stage handles that) or
+			 * most other single-qtd reads ... the queue stops if
+			 * URB_SHORT_NOT_OK was set so the driver submitting
+			 * the urbs could clean it up.
+			 */
+			} else if (IS_SHORT_READ(token) &&
+					!(qtd->hw_alt_next &
+					FOTG210_LIST_END(fotg210))) {
+				stopped = 1;
+			}
+
+		/* stop scanning when we reach qtds the hc is using */
+		} else if (likely(!stopped
+				&& fotg210->rh_state >= FOTG210_RH_RUNNING)) {
+			break;
+
+		/* scan the whole queue for unlinks whenever it stops */
+		} else {
+			stopped = 1;
+
+			/* cancel everything if we halt, suspend, etc */
+			if (fotg210->rh_state < FOTG210_RH_RUNNING)
+				last_status = -ESHUTDOWN;
+
+			/* this qtd is active; skip it unless a previous qtd
+			 * for its urb faulted, or its urb was canceled.
+			 */
+			else if (last_status == -EINPROGRESS && !urb->unlinked)
+				continue;
+
+			/* qh unlinked; token in overlay may be most current */
+			if (state == QH_STATE_IDLE &&
+					cpu_to_hc32(fotg210, qtd->qtd_dma)
+					== hw->hw_current) {
+				token = hc32_to_cpu(fotg210, hw->hw_token);
+
+				/* An unlink may leave an incomplete
+				 * async transaction in the TT buffer.
+				 * We have to clear it.
+				 */
+				fotg210_clear_tt_buffer(fotg210, qh, urb,
+						token);
+			}
+		}
+
+		/* unless we already know the urb's status, collect qtd status
+		 * and update count of bytes transferred.  in common short read
+		 * cases with only one data qtd (including control transfers),
+		 * queue processing won't halt.  but with two or more qtds (for
+		 * example, with a 32 KB transfer), when the first qtd gets a
+		 * short read the second must be removed by hand.
+		 */
+		if (last_status == -EINPROGRESS) {
+			last_status = qtd_copy_status(fotg210, urb,
+					qtd->length, token);
+			if (last_status == -EREMOTEIO &&
+					(qtd->hw_alt_next &
+					FOTG210_LIST_END(fotg210)))
+				last_status = -EINPROGRESS;
+
+			/* As part of low/full-speed endpoint-halt processing
+			 * we must clear the TT buffer (11.17.5).
+			 */
+			if (unlikely(last_status != -EINPROGRESS &&
+					last_status != -EREMOTEIO)) {
+				/* The TT's in some hubs malfunction when they
+				 * receive this request following a STALL (they
+				 * stop sending isochronous packets).  Since a
+				 * STALL can't leave the TT buffer in a busy
+				 * state (if you believe Figures 11-48 - 11-51
+				 * in the USB 2.0 spec), we won't clear the TT
+				 * buffer in this case.  Strictly speaking this
+				 * is a violation of the spec.
+				 */
+				if (last_status != -EPIPE)
+					fotg210_clear_tt_buffer(fotg210, qh,
+							urb, token);
+			}
+		}
+
+		/* if we're removing something not at the queue head,
+		 * patch the hardware queue pointer.
+		 */
+		if (stopped && qtd->qtd_list.prev != &qh->qtd_list) {
+			last = list_entry(qtd->qtd_list.prev,
+					struct fotg210_qtd, qtd_list);
+			last->hw_next = qtd->hw_next;
+		}
+
+		/* remove qtd; it's recycled after possible urb completion */
+		list_del(&qtd->qtd_list);
+		last = qtd;
+
+		/* reinit the xacterr counter for the next qtd */
+		qh->xacterrs = 0;
+	}
+
+	/* last urb's completion might still need calling */
+	if (likely(last != NULL)) {
+		fotg210_urb_done(fotg210, last->urb, last_status);
+		count++;
+		fotg210_qtd_free(fotg210, last);
+	}
+
+	/* Do we need to rescan for URBs dequeued during a giveback? */
+	if (unlikely(qh->needs_rescan)) {
+		/* If the QH is already unlinked, do the rescan now. */
+		if (state == QH_STATE_IDLE)
+			goto rescan;
+
+		/* Otherwise we have to wait until the QH is fully unlinked.
+		 * Our caller will start an unlink if qh->needs_rescan is
+		 * set.  But if an unlink has already started, nothing needs
+		 * to be done.
+		 */
+		if (state != QH_STATE_LINKED)
+			qh->needs_rescan = 0;
+	}
+
+	/* restore original state; caller must unlink or relink */
+	qh->qh_state = state;
+
+	/* be sure the hardware's done with the qh before refreshing
+	 * it after fault cleanup, or recovering from silicon wrongly
+	 * overlaying the dummy qtd (which reduces DMA chatter).
+	 */
+	if (stopped != 0 || hw->hw_qtd_next == FOTG210_LIST_END(fotg210)) {
+		switch (state) {
+		case QH_STATE_IDLE:
+			qh_refresh(fotg210, qh);
+			break;
+		case QH_STATE_LINKED:
+			/* We won't refresh a QH that's linked (after the HC
+			 * stopped the queue).  That avoids a race:
+			 *  - HC reads first part of QH;
+			 *  - CPU updates that first part and the token;
+			 *  - HC reads rest of that QH, including token
+			 * Result:  HC gets an inconsistent image, and then
+			 * DMAs to/from the wrong memory (corrupting it).
+			 *
+			 * That should be rare for interrupt transfers,
+			 * except maybe high bandwidth ...
+			 */
+
+			/* Tell the caller to start an unlink */
+			qh->needs_rescan = 1;
+			break;
+		/* otherwise, unlink already started */
+		}
+	}
+
+	return count;
+}
+
+/* reverse of qh_urb_transaction:  free a list of TDs.
+ * used for cleanup after errors, before HC sees an URB's TDs.
+ */
+static void qtd_list_free(struct fotg210_hcd *fotg210, struct urb *urb,
+		struct list_head *head)
+{
+	struct fotg210_qtd *qtd, *temp;
+
+	list_for_each_entry_safe(qtd, temp, head, qtd_list) {
+		list_del(&qtd->qtd_list);
+		fotg210_qtd_free(fotg210, qtd);
+	}
+}
+
+/* create a list of filled qtds for this URB; won't link into qh.
+ */
+static struct list_head *qh_urb_transaction(struct fotg210_hcd *fotg210,
+		struct urb *urb, struct list_head *head, gfp_t flags)
+{
+	struct fotg210_qtd *qtd, *qtd_prev;
+	dma_addr_t buf;
+	int len, this_sg_len, maxpacket;
+	int is_input;
+	u32 token;
+	int i;
+	struct scatterlist *sg;
+
+	/*
+	 * URBs map to sequences of QTDs:  one logical transaction
+	 */
+	qtd = fotg210_qtd_alloc(fotg210, flags);
+	if (unlikely(!qtd))
+		return NULL;
+	list_add_tail(&qtd->qtd_list, head);
+	qtd->urb = urb;
+
+	token = QTD_STS_ACTIVE;
+	token |= (FOTG210_TUNE_CERR << 10);
+	/* for split transactions, SplitXState initialized to zero */
+
+	len = urb->transfer_buffer_length;
+	is_input = usb_pipein(urb->pipe);
+	if (usb_pipecontrol(urb->pipe)) {
+		/* SETUP pid */
+		qtd_fill(fotg210, qtd, urb->setup_dma,
+				sizeof(struct usb_ctrlrequest),
+				token | (2 /* "setup" */ << 8), 8);
+
+		/* ... and always at least one more pid */
+		token ^= QTD_TOGGLE;
+		qtd_prev = qtd;
+		qtd = fotg210_qtd_alloc(fotg210, flags);
+		if (unlikely(!qtd))
+			goto cleanup;
+		qtd->urb = urb;
+		qtd_prev->hw_next = QTD_NEXT(fotg210, qtd->qtd_dma);
+		list_add_tail(&qtd->qtd_list, head);
+
+		/* for zero length DATA stages, STATUS is always IN */
+		if (len == 0)
+			token |= (1 /* "in" */ << 8);
+	}
+
+	/*
+	 * data transfer stage:  buffer setup
+	 */
+	i = urb->num_mapped_sgs;
+	if (len > 0 && i > 0) {
+		sg = urb->sg;
+		buf = sg_dma_address(sg);
+
+		/* urb->transfer_buffer_length may be smaller than the
+		 * size of the scatterlist (or vice versa)
+		 */
+		this_sg_len = min_t(int, sg_dma_len(sg), len);
+	} else {
+		sg = NULL;
+		buf = urb->transfer_dma;
+		this_sg_len = len;
+	}
+
+	if (is_input)
+		token |= (1 /* "in" */ << 8);
+	/* else it's already initted to "out" pid (0 << 8) */
+
+	maxpacket = usb_maxpacket(urb->dev, urb->pipe);
+
+	/*
+	 * buffer gets wrapped in one or more qtds;
+	 * last one may be "short" (including zero len)
+	 * and may serve as a control status ack
+	 */
+	for (;;) {
+		int this_qtd_len;
+
+		this_qtd_len = qtd_fill(fotg210, qtd, buf, this_sg_len, token,
+				maxpacket);
+		this_sg_len -= this_qtd_len;
+		len -= this_qtd_len;
+		buf += this_qtd_len;
+
+		/*
+		 * short reads advance to a "magic" dummy instead of the next
+		 * qtd ... that forces the queue to stop, for manual cleanup.
+		 * (this will usually be overridden later.)
+		 */
+		if (is_input)
+			qtd->hw_alt_next = fotg210->async->hw->hw_alt_next;
+
+		/* qh makes control packets use qtd toggle; maybe switch it */
+		if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0)
+			token ^= QTD_TOGGLE;
+
+		if (likely(this_sg_len <= 0)) {
+			if (--i <= 0 || len <= 0)
+				break;
+			sg = sg_next(sg);
+			buf = sg_dma_address(sg);
+			this_sg_len = min_t(int, sg_dma_len(sg), len);
+		}
+
+		qtd_prev = qtd;
+		qtd = fotg210_qtd_alloc(fotg210, flags);
+		if (unlikely(!qtd))
+			goto cleanup;
+		qtd->urb = urb;
+		qtd_prev->hw_next = QTD_NEXT(fotg210, qtd->qtd_dma);
+		list_add_tail(&qtd->qtd_list, head);
+	}
+
+	/*
+	 * unless the caller requires manual cleanup after short reads,
+	 * have the alt_next mechanism keep the queue running after the
+	 * last data qtd (the only one, for control and most other cases).
+	 */
+	if (likely((urb->transfer_flags & URB_SHORT_NOT_OK) == 0 ||
+			usb_pipecontrol(urb->pipe)))
+		qtd->hw_alt_next = FOTG210_LIST_END(fotg210);
+
+	/*
+	 * control requests may need a terminating data "status" ack;
+	 * other OUT ones may need a terminating short packet
+	 * (zero length).
+	 */
+	if (likely(urb->transfer_buffer_length != 0)) {
+		int one_more = 0;
+
+		if (usb_pipecontrol(urb->pipe)) {
+			one_more = 1;
+			token ^= 0x0100;	/* "in" <--> "out"  */
+			token |= QTD_TOGGLE;	/* force DATA1 */
+		} else if (usb_pipeout(urb->pipe)
+				&& (urb->transfer_flags & URB_ZERO_PACKET)
+				&& !(urb->transfer_buffer_length % maxpacket)) {
+			one_more = 1;
+		}
+		if (one_more) {
+			qtd_prev = qtd;
+			qtd = fotg210_qtd_alloc(fotg210, flags);
+			if (unlikely(!qtd))
+				goto cleanup;
+			qtd->urb = urb;
+			qtd_prev->hw_next = QTD_NEXT(fotg210, qtd->qtd_dma);
+			list_add_tail(&qtd->qtd_list, head);
+
+			/* never any data in such packets */
+			qtd_fill(fotg210, qtd, 0, 0, token, 0);
+		}
+	}
+
+	/* by default, enable interrupt on urb completion */
+	if (likely(!(urb->transfer_flags & URB_NO_INTERRUPT)))
+		qtd->hw_token |= cpu_to_hc32(fotg210, QTD_IOC);
+	return head;
+
+cleanup:
+	qtd_list_free(fotg210, urb, head);
+	return NULL;
+}
+
+/* Would be best to create all qh's from config descriptors,
+ * when each interface/altsetting is established.  Unlink
+ * any previous qh and cancel its urbs first; endpoints are
+ * implicitly reset then (data toggle too).
+ * That'd mean updating how usbcore talks to HCDs. (2.7?)
+ */
+
+
+/* Each QH holds a qtd list; a QH is used for everything except iso.
+ *
+ * For interrupt urbs, the scheduler must set the microframe scheduling
+ * mask(s) each time the QH gets scheduled.  For highspeed, that's
+ * just one microframe in the s-mask.  For split interrupt transactions
+ * there are additional complications: c-mask, maybe FSTNs.
+ */
+static struct fotg210_qh *qh_make(struct fotg210_hcd *fotg210, struct urb *urb,
+		gfp_t flags)
+{
+	struct fotg210_qh *qh = fotg210_qh_alloc(fotg210, flags);
+	struct usb_host_endpoint *ep;
+	u32 info1 = 0, info2 = 0;
+	int is_input, type;
+	int maxp = 0;
+	int mult;
+	struct usb_tt *tt = urb->dev->tt;
+	struct fotg210_qh_hw *hw;
+
+	if (!qh)
+		return qh;
+
+	/*
+	 * init endpoint/device data for this QH
+	 */
+	info1 |= usb_pipeendpoint(urb->pipe) << 8;
+	info1 |= usb_pipedevice(urb->pipe) << 0;
+
+	is_input = usb_pipein(urb->pipe);
+	type = usb_pipetype(urb->pipe);
+	ep = usb_pipe_endpoint(urb->dev, urb->pipe);
+	maxp = usb_endpoint_maxp(&ep->desc);
+	mult = usb_endpoint_maxp_mult(&ep->desc);
+
+	/* 1024 byte maxpacket is a hardware ceiling.  High bandwidth
+	 * acts like up to 3KB, but is built from smaller packets.
+	 */
+	if (maxp > 1024) {
+		fotg210_dbg(fotg210, "bogus qh maxpacket %d\n", maxp);
+		goto done;
+	}
+
+	/* Compute interrupt scheduling parameters just once, and save.
+	 * - allowing for high bandwidth, how many nsec/uframe are used?
+	 * - split transactions need a second CSPLIT uframe; same question
+	 * - splits also need a schedule gap (for full/low speed I/O)
+	 * - qh has a polling interval
+	 *
+	 * For control/bulk requests, the HC or TT handles these.
+	 */
+	if (type == PIPE_INTERRUPT) {
+		qh->usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH,
+				is_input, 0, mult * maxp));
+		qh->start = NO_FRAME;
+
+		if (urb->dev->speed == USB_SPEED_HIGH) {
+			qh->c_usecs = 0;
+			qh->gap_uf = 0;
+
+			qh->period = urb->interval >> 3;
+			if (qh->period == 0 && urb->interval != 1) {
+				/* NOTE interval 2 or 4 uframes could work.
+				 * But interval 1 scheduling is simpler, and
+				 * includes high bandwidth.
+				 */
+				urb->interval = 1;
+			} else if (qh->period > fotg210->periodic_size) {
+				qh->period = fotg210->periodic_size;
+				urb->interval = qh->period << 3;
+			}
+		} else {
+			int think_time;
+
+			/* gap is f(FS/LS transfer times) */
+			qh->gap_uf = 1 + usb_calc_bus_time(urb->dev->speed,
+					is_input, 0, maxp) / (125 * 1000);
+
+			/* FIXME this just approximates SPLIT/CSPLIT times */
+			if (is_input) {		/* SPLIT, gap, CSPLIT+DATA */
+				qh->c_usecs = qh->usecs + HS_USECS(0);
+				qh->usecs = HS_USECS(1);
+			} else {		/* SPLIT+DATA, gap, CSPLIT */
+				qh->usecs += HS_USECS(1);
+				qh->c_usecs = HS_USECS(0);
+			}
+
+			think_time = tt ? tt->think_time : 0;
+			qh->tt_usecs = NS_TO_US(think_time +
+					usb_calc_bus_time(urb->dev->speed,
+					is_input, 0, maxp));
+			qh->period = urb->interval;
+			if (qh->period > fotg210->periodic_size) {
+				qh->period = fotg210->periodic_size;
+				urb->interval = qh->period;
+			}
+		}
+	}
+
+	/* support for tt scheduling, and access to toggles */
+	qh->dev = urb->dev;
+
+	/* using TT? */
+	switch (urb->dev->speed) {
+	case USB_SPEED_LOW:
+		info1 |= QH_LOW_SPEED;
+		fallthrough;
+
+	case USB_SPEED_FULL:
+		/* EPS 0 means "full" */
+		if (type != PIPE_INTERRUPT)
+			info1 |= (FOTG210_TUNE_RL_TT << 28);
+		if (type == PIPE_CONTROL) {
+			info1 |= QH_CONTROL_EP;		/* for TT */
+			info1 |= QH_TOGGLE_CTL;		/* toggle from qtd */
+		}
+		info1 |= maxp << 16;
+
+		info2 |= (FOTG210_TUNE_MULT_TT << 30);
+
+		/* Some Freescale processors have an erratum in which the
+		 * port number in the queue head was 0..N-1 instead of 1..N.
+		 */
+		if (fotg210_has_fsl_portno_bug(fotg210))
+			info2 |= (urb->dev->ttport-1) << 23;
+		else
+			info2 |= urb->dev->ttport << 23;
+
+		/* set the address of the TT; for TDI's integrated
+		 * root hub tt, leave it zeroed.
+		 */
+		if (tt && tt->hub != fotg210_to_hcd(fotg210)->self.root_hub)
+			info2 |= tt->hub->devnum << 16;
+
+		/* NOTE:  if (PIPE_INTERRUPT) { scheduler sets c-mask } */
+
+		break;
+
+	case USB_SPEED_HIGH:		/* no TT involved */
+		info1 |= QH_HIGH_SPEED;
+		if (type == PIPE_CONTROL) {
+			info1 |= (FOTG210_TUNE_RL_HS << 28);
+			info1 |= 64 << 16;	/* usb2 fixed maxpacket */
+			info1 |= QH_TOGGLE_CTL;	/* toggle from qtd */
+			info2 |= (FOTG210_TUNE_MULT_HS << 30);
+		} else if (type == PIPE_BULK) {
+			info1 |= (FOTG210_TUNE_RL_HS << 28);
+			/* The USB spec says that high speed bulk endpoints
+			 * always use 512 byte maxpacket.  But some device
+			 * vendors decided to ignore that, and MSFT is happy
+			 * to help them do so.  So now people expect to use
+			 * such nonconformant devices with Linux too; sigh.
+			 */
+			info1 |= maxp << 16;
+			info2 |= (FOTG210_TUNE_MULT_HS << 30);
+		} else {		/* PIPE_INTERRUPT */
+			info1 |= maxp << 16;
+			info2 |= mult << 30;
+		}
+		break;
+	default:
+		fotg210_dbg(fotg210, "bogus dev %p speed %d\n", urb->dev,
+				urb->dev->speed);
+done:
+		qh_destroy(fotg210, qh);
+		return NULL;
+	}
+
+	/* NOTE:  if (PIPE_INTERRUPT) { scheduler sets s-mask } */
+
+	/* init as live, toggle clear, advance to dummy */
+	qh->qh_state = QH_STATE_IDLE;
+	hw = qh->hw;
+	hw->hw_info1 = cpu_to_hc32(fotg210, info1);
+	hw->hw_info2 = cpu_to_hc32(fotg210, info2);
+	qh->is_out = !is_input;
+	usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), !is_input, 1);
+	qh_refresh(fotg210, qh);
+	return qh;
+}
+
+static void enable_async(struct fotg210_hcd *fotg210)
+{
+	if (fotg210->async_count++)
+		return;
+
+	/* Stop waiting to turn off the async schedule */
+	fotg210->enabled_hrtimer_events &= ~BIT(FOTG210_HRTIMER_DISABLE_ASYNC);
+
+	/* Don't start the schedule until ASS is 0 */
+	fotg210_poll_ASS(fotg210);
+	turn_on_io_watchdog(fotg210);
+}
+
+static void disable_async(struct fotg210_hcd *fotg210)
+{
+	if (--fotg210->async_count)
+		return;
+
+	/* The async schedule and async_unlink list are supposed to be empty */
+	WARN_ON(fotg210->async->qh_next.qh || fotg210->async_unlink);
+
+	/* Don't turn off the schedule until ASS is 1 */
+	fotg210_poll_ASS(fotg210);
+}
+
+/* move qh (and its qtds) onto async queue; maybe enable queue.  */
+
+static void qh_link_async(struct fotg210_hcd *fotg210, struct fotg210_qh *qh)
+{
+	__hc32 dma = QH_NEXT(fotg210, qh->qh_dma);
+	struct fotg210_qh *head;
+
+	/* Don't link a QH if there's a Clear-TT-Buffer pending */
+	if (unlikely(qh->clearing_tt))
+		return;
+
+	WARN_ON(qh->qh_state != QH_STATE_IDLE);
+
+	/* clear halt and/or toggle; and maybe recover from silicon quirk */
+	qh_refresh(fotg210, qh);
+
+	/* splice right after start */
+	head = fotg210->async;
+	qh->qh_next = head->qh_next;
+	qh->hw->hw_next = head->hw->hw_next;
+	wmb();
+
+	head->qh_next.qh = qh;
+	head->hw->hw_next = dma;
+
+	qh->xacterrs = 0;
+	qh->qh_state = QH_STATE_LINKED;
+	/* qtd completions reported later by interrupt */
+
+	enable_async(fotg210);
+}
+
+/* For control/bulk/interrupt, return QH with these TDs appended.
+ * Allocates and initializes the QH if necessary.
+ * Returns null if it can't allocate a QH it needs to.
+ * If the QH has TDs (urbs) already, that's great.
+ */
+static struct fotg210_qh *qh_append_tds(struct fotg210_hcd *fotg210,
+		struct urb *urb, struct list_head *qtd_list,
+		int epnum, void **ptr)
+{
+	struct fotg210_qh *qh = NULL;
+	__hc32 qh_addr_mask = cpu_to_hc32(fotg210, 0x7f);
+
+	qh = (struct fotg210_qh *) *ptr;
+	if (unlikely(qh == NULL)) {
+		/* can't sleep here, we have fotg210->lock... */
+		qh = qh_make(fotg210, urb, GFP_ATOMIC);
+		*ptr = qh;
+	}
+	if (likely(qh != NULL)) {
+		struct fotg210_qtd *qtd;
+
+		if (unlikely(list_empty(qtd_list)))
+			qtd = NULL;
+		else
+			qtd = list_entry(qtd_list->next, struct fotg210_qtd,
+					qtd_list);
+
+		/* control qh may need patching ... */
+		if (unlikely(epnum == 0)) {
+			/* usb_reset_device() briefly reverts to address 0 */
+			if (usb_pipedevice(urb->pipe) == 0)
+				qh->hw->hw_info1 &= ~qh_addr_mask;
+		}
+
+		/* just one way to queue requests: swap with the dummy qtd.
+		 * only hc or qh_refresh() ever modify the overlay.
+		 */
+		if (likely(qtd != NULL)) {
+			struct fotg210_qtd *dummy;
+			dma_addr_t dma;
+			__hc32 token;
+
+			/* to avoid racing the HC, use the dummy td instead of
+			 * the first td of our list (becomes new dummy).  both
+			 * tds stay deactivated until we're done, when the
+			 * HC is allowed to fetch the old dummy (4.10.2).
+			 */
+			token = qtd->hw_token;
+			qtd->hw_token = HALT_BIT(fotg210);
+
+			dummy = qh->dummy;
+
+			dma = dummy->qtd_dma;
+			*dummy = *qtd;
+			dummy->qtd_dma = dma;
+
+			list_del(&qtd->qtd_list);
+			list_add(&dummy->qtd_list, qtd_list);
+			list_splice_tail(qtd_list, &qh->qtd_list);
+
+			fotg210_qtd_init(fotg210, qtd, qtd->qtd_dma);
+			qh->dummy = qtd;
+
+			/* hc must see the new dummy at list end */
+			dma = qtd->qtd_dma;
+			qtd = list_entry(qh->qtd_list.prev,
+					struct fotg210_qtd, qtd_list);
+			qtd->hw_next = QTD_NEXT(fotg210, dma);
+
+			/* let the hc process these next qtds */
+			wmb();
+			dummy->hw_token = token;
+
+			urb->hcpriv = qh;
+		}
+	}
+	return qh;
+}
+
+static int submit_async(struct fotg210_hcd *fotg210, struct urb *urb,
+		struct list_head *qtd_list, gfp_t mem_flags)
+{
+	int epnum;
+	unsigned long flags;
+	struct fotg210_qh *qh = NULL;
+	int rc;
+
+	epnum = urb->ep->desc.bEndpointAddress;
+
+#ifdef FOTG210_URB_TRACE
+	{
+		struct fotg210_qtd *qtd;
+
+		qtd = list_entry(qtd_list->next, struct fotg210_qtd, qtd_list);
+		fotg210_dbg(fotg210,
+				"%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n",
+				__func__, urb->dev->devpath, urb,
+				epnum & 0x0f, (epnum & USB_DIR_IN)
+					? "in" : "out",
+				urb->transfer_buffer_length,
+				qtd, urb->ep->hcpriv);
+	}
+#endif
+
+	spin_lock_irqsave(&fotg210->lock, flags);
+	if (unlikely(!HCD_HW_ACCESSIBLE(fotg210_to_hcd(fotg210)))) {
+		rc = -ESHUTDOWN;
+		goto done;
+	}
+	rc = usb_hcd_link_urb_to_ep(fotg210_to_hcd(fotg210), urb);
+	if (unlikely(rc))
+		goto done;
+
+	qh = qh_append_tds(fotg210, urb, qtd_list, epnum, &urb->ep->hcpriv);
+	if (unlikely(qh == NULL)) {
+		usb_hcd_unlink_urb_from_ep(fotg210_to_hcd(fotg210), urb);
+		rc = -ENOMEM;
+		goto done;
+	}
+
+	/* Control/bulk operations through TTs don't need scheduling,
+	 * the HC and TT handle it when the TT has a buffer ready.
+	 */
+	if (likely(qh->qh_state == QH_STATE_IDLE))
+		qh_link_async(fotg210, qh);
+done:
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+	if (unlikely(qh == NULL))
+		qtd_list_free(fotg210, urb, qtd_list);
+	return rc;
+}
+
+static void single_unlink_async(struct fotg210_hcd *fotg210,
+		struct fotg210_qh *qh)
+{
+	struct fotg210_qh *prev;
+
+	/* Add to the end of the list of QHs waiting for the next IAAD */
+	qh->qh_state = QH_STATE_UNLINK;
+	if (fotg210->async_unlink)
+		fotg210->async_unlink_last->unlink_next = qh;
+	else
+		fotg210->async_unlink = qh;
+	fotg210->async_unlink_last = qh;
+
+	/* Unlink it from the schedule */
+	prev = fotg210->async;
+	while (prev->qh_next.qh != qh)
+		prev = prev->qh_next.qh;
+
+	prev->hw->hw_next = qh->hw->hw_next;
+	prev->qh_next = qh->qh_next;
+	if (fotg210->qh_scan_next == qh)
+		fotg210->qh_scan_next = qh->qh_next.qh;
+}
+
+static void start_iaa_cycle(struct fotg210_hcd *fotg210, bool nested)
+{
+	/*
+	 * Do nothing if an IAA cycle is already running or
+	 * if one will be started shortly.
+	 */
+	if (fotg210->async_iaa || fotg210->async_unlinking)
+		return;
+
+	/* Do all the waiting QHs at once */
+	fotg210->async_iaa = fotg210->async_unlink;
+	fotg210->async_unlink = NULL;
+
+	/* If the controller isn't running, we don't have to wait for it */
+	if (unlikely(fotg210->rh_state < FOTG210_RH_RUNNING)) {
+		if (!nested)		/* Avoid recursion */
+			end_unlink_async(fotg210);
+
+	/* Otherwise start a new IAA cycle */
+	} else if (likely(fotg210->rh_state == FOTG210_RH_RUNNING)) {
+		/* Make sure the unlinks are all visible to the hardware */
+		wmb();
+
+		fotg210_writel(fotg210, fotg210->command | CMD_IAAD,
+				&fotg210->regs->command);
+		fotg210_readl(fotg210, &fotg210->regs->command);
+		fotg210_enable_event(fotg210, FOTG210_HRTIMER_IAA_WATCHDOG,
+				true);
+	}
+}
+
+/* the async qh for the qtds being unlinked are now gone from the HC */
+
+static void end_unlink_async(struct fotg210_hcd *fotg210)
+{
+	struct fotg210_qh *qh;
+
+	/* Process the idle QHs */
+restart:
+	fotg210->async_unlinking = true;
+	while (fotg210->async_iaa) {
+		qh = fotg210->async_iaa;
+		fotg210->async_iaa = qh->unlink_next;
+		qh->unlink_next = NULL;
+
+		qh->qh_state = QH_STATE_IDLE;
+		qh->qh_next.qh = NULL;
+
+		qh_completions(fotg210, qh);
+		if (!list_empty(&qh->qtd_list) &&
+				fotg210->rh_state == FOTG210_RH_RUNNING)
+			qh_link_async(fotg210, qh);
+		disable_async(fotg210);
+	}
+	fotg210->async_unlinking = false;
+
+	/* Start a new IAA cycle if any QHs are waiting for it */
+	if (fotg210->async_unlink) {
+		start_iaa_cycle(fotg210, true);
+		if (unlikely(fotg210->rh_state < FOTG210_RH_RUNNING))
+			goto restart;
+	}
+}
+
+static void unlink_empty_async(struct fotg210_hcd *fotg210)
+{
+	struct fotg210_qh *qh, *next;
+	bool stopped = (fotg210->rh_state < FOTG210_RH_RUNNING);
+	bool check_unlinks_later = false;
+
+	/* Unlink all the async QHs that have been empty for a timer cycle */
+	next = fotg210->async->qh_next.qh;
+	while (next) {
+		qh = next;
+		next = qh->qh_next.qh;
+
+		if (list_empty(&qh->qtd_list) &&
+				qh->qh_state == QH_STATE_LINKED) {
+			if (!stopped && qh->unlink_cycle ==
+					fotg210->async_unlink_cycle)
+				check_unlinks_later = true;
+			else
+				single_unlink_async(fotg210, qh);
+		}
+	}
+
+	/* Start a new IAA cycle if any QHs are waiting for it */
+	if (fotg210->async_unlink)
+		start_iaa_cycle(fotg210, false);
+
+	/* QHs that haven't been empty for long enough will be handled later */
+	if (check_unlinks_later) {
+		fotg210_enable_event(fotg210, FOTG210_HRTIMER_ASYNC_UNLINKS,
+				true);
+		++fotg210->async_unlink_cycle;
+	}
+}
+
+/* makes sure the async qh will become idle */
+/* caller must own fotg210->lock */
+
+static void start_unlink_async(struct fotg210_hcd *fotg210,
+		struct fotg210_qh *qh)
+{
+	/*
+	 * If the QH isn't linked then there's nothing we can do
+	 * unless we were called during a giveback, in which case
+	 * qh_completions() has to deal with it.
+	 */
+	if (qh->qh_state != QH_STATE_LINKED) {
+		if (qh->qh_state == QH_STATE_COMPLETING)
+			qh->needs_rescan = 1;
+		return;
+	}
+
+	single_unlink_async(fotg210, qh);
+	start_iaa_cycle(fotg210, false);
+}
+
+static void scan_async(struct fotg210_hcd *fotg210)
+{
+	struct fotg210_qh *qh;
+	bool check_unlinks_later = false;
+
+	fotg210->qh_scan_next = fotg210->async->qh_next.qh;
+	while (fotg210->qh_scan_next) {
+		qh = fotg210->qh_scan_next;
+		fotg210->qh_scan_next = qh->qh_next.qh;
+rescan:
+		/* clean any finished work for this qh */
+		if (!list_empty(&qh->qtd_list)) {
+			int temp;
+
+			/*
+			 * Unlinks could happen here; completion reporting
+			 * drops the lock.  That's why fotg210->qh_scan_next
+			 * always holds the next qh to scan; if the next qh
+			 * gets unlinked then fotg210->qh_scan_next is adjusted
+			 * in single_unlink_async().
+			 */
+			temp = qh_completions(fotg210, qh);
+			if (qh->needs_rescan) {
+				start_unlink_async(fotg210, qh);
+			} else if (list_empty(&qh->qtd_list)
+					&& qh->qh_state == QH_STATE_LINKED) {
+				qh->unlink_cycle = fotg210->async_unlink_cycle;
+				check_unlinks_later = true;
+			} else if (temp != 0)
+				goto rescan;
+		}
+	}
+
+	/*
+	 * Unlink empty entries, reducing DMA usage as well
+	 * as HCD schedule-scanning costs.  Delay for any qh
+	 * we just scanned, there's a not-unusual case that it
+	 * doesn't stay idle for long.
+	 */
+	if (check_unlinks_later && fotg210->rh_state == FOTG210_RH_RUNNING &&
+			!(fotg210->enabled_hrtimer_events &
+			BIT(FOTG210_HRTIMER_ASYNC_UNLINKS))) {
+		fotg210_enable_event(fotg210,
+				FOTG210_HRTIMER_ASYNC_UNLINKS, true);
+		++fotg210->async_unlink_cycle;
+	}
+}
+/* EHCI scheduled transaction support:  interrupt, iso, split iso
+ * These are called "periodic" transactions in the EHCI spec.
+ *
+ * Note that for interrupt transfers, the QH/QTD manipulation is shared
+ * with the "asynchronous" transaction support (control/bulk transfers).
+ * The only real difference is in how interrupt transfers are scheduled.
+ *
+ * For ISO, we make an "iso_stream" head to serve the same role as a QH.
+ * It keeps track of every ITD (or SITD) that's linked, and holds enough
+ * pre-calculated schedule data to make appending to the queue be quick.
+ */
+static int fotg210_get_frame(struct usb_hcd *hcd);
+
+/* periodic_next_shadow - return "next" pointer on shadow list
+ * @periodic: host pointer to qh/itd
+ * @tag: hardware tag for type of this record
+ */
+static union fotg210_shadow *periodic_next_shadow(struct fotg210_hcd *fotg210,
+		union fotg210_shadow *periodic, __hc32 tag)
+{
+	switch (hc32_to_cpu(fotg210, tag)) {
+	case Q_TYPE_QH:
+		return &periodic->qh->qh_next;
+	case Q_TYPE_FSTN:
+		return &periodic->fstn->fstn_next;
+	default:
+		return &periodic->itd->itd_next;
+	}
+}
+
+static __hc32 *shadow_next_periodic(struct fotg210_hcd *fotg210,
+		union fotg210_shadow *periodic, __hc32 tag)
+{
+	switch (hc32_to_cpu(fotg210, tag)) {
+	/* our fotg210_shadow.qh is actually software part */
+	case Q_TYPE_QH:
+		return &periodic->qh->hw->hw_next;
+	/* others are hw parts */
+	default:
+		return periodic->hw_next;
+	}
+}
+
+/* caller must hold fotg210->lock */
+static void periodic_unlink(struct fotg210_hcd *fotg210, unsigned frame,
+		void *ptr)
+{
+	union fotg210_shadow *prev_p = &fotg210->pshadow[frame];
+	__hc32 *hw_p = &fotg210->periodic[frame];
+	union fotg210_shadow here = *prev_p;
+
+	/* find predecessor of "ptr"; hw and shadow lists are in sync */
+	while (here.ptr && here.ptr != ptr) {
+		prev_p = periodic_next_shadow(fotg210, prev_p,
+				Q_NEXT_TYPE(fotg210, *hw_p));
+		hw_p = shadow_next_periodic(fotg210, &here,
+				Q_NEXT_TYPE(fotg210, *hw_p));
+		here = *prev_p;
+	}
+	/* an interrupt entry (at list end) could have been shared */
+	if (!here.ptr)
+		return;
+
+	/* update shadow and hardware lists ... the old "next" pointers
+	 * from ptr may still be in use, the caller updates them.
+	 */
+	*prev_p = *periodic_next_shadow(fotg210, &here,
+			Q_NEXT_TYPE(fotg210, *hw_p));
+
+	*hw_p = *shadow_next_periodic(fotg210, &here,
+			Q_NEXT_TYPE(fotg210, *hw_p));
+}
+
+/* how many of the uframe's 125 usecs are allocated? */
+static unsigned short periodic_usecs(struct fotg210_hcd *fotg210,
+		unsigned frame, unsigned uframe)
+{
+	__hc32 *hw_p = &fotg210->periodic[frame];
+	union fotg210_shadow *q = &fotg210->pshadow[frame];
+	unsigned usecs = 0;
+	struct fotg210_qh_hw *hw;
+
+	while (q->ptr) {
+		switch (hc32_to_cpu(fotg210, Q_NEXT_TYPE(fotg210, *hw_p))) {
+		case Q_TYPE_QH:
+			hw = q->qh->hw;
+			/* is it in the S-mask? */
+			if (hw->hw_info2 & cpu_to_hc32(fotg210, 1 << uframe))
+				usecs += q->qh->usecs;
+			/* ... or C-mask? */
+			if (hw->hw_info2 & cpu_to_hc32(fotg210,
+					1 << (8 + uframe)))
+				usecs += q->qh->c_usecs;
+			hw_p = &hw->hw_next;
+			q = &q->qh->qh_next;
+			break;
+		/* case Q_TYPE_FSTN: */
+		default:
+			/* for "save place" FSTNs, count the relevant INTR
+			 * bandwidth from the previous frame
+			 */
+			if (q->fstn->hw_prev != FOTG210_LIST_END(fotg210))
+				fotg210_dbg(fotg210, "ignoring FSTN cost ...\n");
+
+			hw_p = &q->fstn->hw_next;
+			q = &q->fstn->fstn_next;
+			break;
+		case Q_TYPE_ITD:
+			if (q->itd->hw_transaction[uframe])
+				usecs += q->itd->stream->usecs;
+			hw_p = &q->itd->hw_next;
+			q = &q->itd->itd_next;
+			break;
+		}
+	}
+	if (usecs > fotg210->uframe_periodic_max)
+		fotg210_err(fotg210, "uframe %d sched overrun: %d usecs\n",
+				frame * 8 + uframe, usecs);
+	return usecs;
+}
+
+static int same_tt(struct usb_device *dev1, struct usb_device *dev2)
+{
+	if (!dev1->tt || !dev2->tt)
+		return 0;
+	if (dev1->tt != dev2->tt)
+		return 0;
+	if (dev1->tt->multi)
+		return dev1->ttport == dev2->ttport;
+	else
+		return 1;
+}
+
+/* return true iff the device's transaction translator is available
+ * for a periodic transfer starting at the specified frame, using
+ * all the uframes in the mask.
+ */
+static int tt_no_collision(struct fotg210_hcd *fotg210, unsigned period,
+		struct usb_device *dev, unsigned frame, u32 uf_mask)
+{
+	if (period == 0)	/* error */
+		return 0;
+
+	/* note bandwidth wastage:  split never follows csplit
+	 * (different dev or endpoint) until the next uframe.
+	 * calling convention doesn't make that distinction.
+	 */
+	for (; frame < fotg210->periodic_size; frame += period) {
+		union fotg210_shadow here;
+		__hc32 type;
+		struct fotg210_qh_hw *hw;
+
+		here = fotg210->pshadow[frame];
+		type = Q_NEXT_TYPE(fotg210, fotg210->periodic[frame]);
+		while (here.ptr) {
+			switch (hc32_to_cpu(fotg210, type)) {
+			case Q_TYPE_ITD:
+				type = Q_NEXT_TYPE(fotg210, here.itd->hw_next);
+				here = here.itd->itd_next;
+				continue;
+			case Q_TYPE_QH:
+				hw = here.qh->hw;
+				if (same_tt(dev, here.qh->dev)) {
+					u32 mask;
+
+					mask = hc32_to_cpu(fotg210,
+							hw->hw_info2);
+					/* "knows" no gap is needed */
+					mask |= mask >> 8;
+					if (mask & uf_mask)
+						break;
+				}
+				type = Q_NEXT_TYPE(fotg210, hw->hw_next);
+				here = here.qh->qh_next;
+				continue;
+			/* case Q_TYPE_FSTN: */
+			default:
+				fotg210_dbg(fotg210,
+						"periodic frame %d bogus type %d\n",
+						frame, type);
+			}
+
+			/* collision or error */
+			return 0;
+		}
+	}
+
+	/* no collision */
+	return 1;
+}
+
+static void enable_periodic(struct fotg210_hcd *fotg210)
+{
+	if (fotg210->periodic_count++)
+		return;
+
+	/* Stop waiting to turn off the periodic schedule */
+	fotg210->enabled_hrtimer_events &=
+		~BIT(FOTG210_HRTIMER_DISABLE_PERIODIC);
+
+	/* Don't start the schedule until PSS is 0 */
+	fotg210_poll_PSS(fotg210);
+	turn_on_io_watchdog(fotg210);
+}
+
+static void disable_periodic(struct fotg210_hcd *fotg210)
+{
+	if (--fotg210->periodic_count)
+		return;
+
+	/* Don't turn off the schedule until PSS is 1 */
+	fotg210_poll_PSS(fotg210);
+}
+
+/* periodic schedule slots have iso tds (normal or split) first, then a
+ * sparse tree for active interrupt transfers.
+ *
+ * this just links in a qh; caller guarantees uframe masks are set right.
+ * no FSTN support (yet; fotg210 0.96+)
+ */
+static void qh_link_periodic(struct fotg210_hcd *fotg210, struct fotg210_qh *qh)
+{
+	unsigned i;
+	unsigned period = qh->period;
+
+	dev_dbg(&qh->dev->dev,
+			"link qh%d-%04x/%p start %d [%d/%d us]\n", period,
+			hc32_to_cpup(fotg210, &qh->hw->hw_info2) &
+			(QH_CMASK | QH_SMASK), qh, qh->start, qh->usecs,
+			qh->c_usecs);
+
+	/* high bandwidth, or otherwise every microframe */
+	if (period == 0)
+		period = 1;
+
+	for (i = qh->start; i < fotg210->periodic_size; i += period) {
+		union fotg210_shadow *prev = &fotg210->pshadow[i];
+		__hc32 *hw_p = &fotg210->periodic[i];
+		union fotg210_shadow here = *prev;
+		__hc32 type = 0;
+
+		/* skip the iso nodes at list head */
+		while (here.ptr) {
+			type = Q_NEXT_TYPE(fotg210, *hw_p);
+			if (type == cpu_to_hc32(fotg210, Q_TYPE_QH))
+				break;
+			prev = periodic_next_shadow(fotg210, prev, type);
+			hw_p = shadow_next_periodic(fotg210, &here, type);
+			here = *prev;
+		}
+
+		/* sorting each branch by period (slow-->fast)
+		 * enables sharing interior tree nodes
+		 */
+		while (here.ptr && qh != here.qh) {
+			if (qh->period > here.qh->period)
+				break;
+			prev = &here.qh->qh_next;
+			hw_p = &here.qh->hw->hw_next;
+			here = *prev;
+		}
+		/* link in this qh, unless some earlier pass did that */
+		if (qh != here.qh) {
+			qh->qh_next = here;
+			if (here.qh)
+				qh->hw->hw_next = *hw_p;
+			wmb();
+			prev->qh = qh;
+			*hw_p = QH_NEXT(fotg210, qh->qh_dma);
+		}
+	}
+	qh->qh_state = QH_STATE_LINKED;
+	qh->xacterrs = 0;
+
+	/* update per-qh bandwidth for usbfs */
+	fotg210_to_hcd(fotg210)->self.bandwidth_allocated += qh->period
+		? ((qh->usecs + qh->c_usecs) / qh->period)
+		: (qh->usecs * 8);
+
+	list_add(&qh->intr_node, &fotg210->intr_qh_list);
+
+	/* maybe enable periodic schedule processing */
+	++fotg210->intr_count;
+	enable_periodic(fotg210);
+}
+
+static void qh_unlink_periodic(struct fotg210_hcd *fotg210,
+		struct fotg210_qh *qh)
+{
+	unsigned i;
+	unsigned period;
+
+	/*
+	 * If qh is for a low/full-speed device, simply unlinking it
+	 * could interfere with an ongoing split transaction.  To unlink
+	 * it safely would require setting the QH_INACTIVATE bit and
+	 * waiting at least one frame, as described in EHCI 4.12.2.5.
+	 *
+	 * We won't bother with any of this.  Instead, we assume that the
+	 * only reason for unlinking an interrupt QH while the current URB
+	 * is still active is to dequeue all the URBs (flush the whole
+	 * endpoint queue).
+	 *
+	 * If rebalancing the periodic schedule is ever implemented, this
+	 * approach will no longer be valid.
+	 */
+
+	/* high bandwidth, or otherwise part of every microframe */
+	period = qh->period;
+	if (!period)
+		period = 1;
+
+	for (i = qh->start; i < fotg210->periodic_size; i += period)
+		periodic_unlink(fotg210, i, qh);
+
+	/* update per-qh bandwidth for usbfs */
+	fotg210_to_hcd(fotg210)->self.bandwidth_allocated -= qh->period
+		? ((qh->usecs + qh->c_usecs) / qh->period)
+		: (qh->usecs * 8);
+
+	dev_dbg(&qh->dev->dev,
+			"unlink qh%d-%04x/%p start %d [%d/%d us]\n",
+			qh->period, hc32_to_cpup(fotg210, &qh->hw->hw_info2) &
+			(QH_CMASK | QH_SMASK), qh, qh->start, qh->usecs,
+			qh->c_usecs);
+
+	/* qh->qh_next still "live" to HC */
+	qh->qh_state = QH_STATE_UNLINK;
+	qh->qh_next.ptr = NULL;
+
+	if (fotg210->qh_scan_next == qh)
+		fotg210->qh_scan_next = list_entry(qh->intr_node.next,
+				struct fotg210_qh, intr_node);
+	list_del(&qh->intr_node);
+}
+
+static void start_unlink_intr(struct fotg210_hcd *fotg210,
+		struct fotg210_qh *qh)
+{
+	/* If the QH isn't linked then there's nothing we can do
+	 * unless we were called during a giveback, in which case
+	 * qh_completions() has to deal with it.
+	 */
+	if (qh->qh_state != QH_STATE_LINKED) {
+		if (qh->qh_state == QH_STATE_COMPLETING)
+			qh->needs_rescan = 1;
+		return;
+	}
+
+	qh_unlink_periodic(fotg210, qh);
+
+	/* Make sure the unlinks are visible before starting the timer */
+	wmb();
+
+	/*
+	 * The EHCI spec doesn't say how long it takes the controller to
+	 * stop accessing an unlinked interrupt QH.  The timer delay is
+	 * 9 uframes; presumably that will be long enough.
+	 */
+	qh->unlink_cycle = fotg210->intr_unlink_cycle;
+
+	/* New entries go at the end of the intr_unlink list */
+	if (fotg210->intr_unlink)
+		fotg210->intr_unlink_last->unlink_next = qh;
+	else
+		fotg210->intr_unlink = qh;
+	fotg210->intr_unlink_last = qh;
+
+	if (fotg210->intr_unlinking)
+		;	/* Avoid recursive calls */
+	else if (fotg210->rh_state < FOTG210_RH_RUNNING)
+		fotg210_handle_intr_unlinks(fotg210);
+	else if (fotg210->intr_unlink == qh) {
+		fotg210_enable_event(fotg210, FOTG210_HRTIMER_UNLINK_INTR,
+				true);
+		++fotg210->intr_unlink_cycle;
+	}
+}
+
+static void end_unlink_intr(struct fotg210_hcd *fotg210, struct fotg210_qh *qh)
+{
+	struct fotg210_qh_hw *hw = qh->hw;
+	int rc;
+
+	qh->qh_state = QH_STATE_IDLE;
+	hw->hw_next = FOTG210_LIST_END(fotg210);
+
+	qh_completions(fotg210, qh);
+
+	/* reschedule QH iff another request is queued */
+	if (!list_empty(&qh->qtd_list) &&
+			fotg210->rh_state == FOTG210_RH_RUNNING) {
+		rc = qh_schedule(fotg210, qh);
+
+		/* An error here likely indicates handshake failure
+		 * or no space left in the schedule.  Neither fault
+		 * should happen often ...
+		 *
+		 * FIXME kill the now-dysfunctional queued urbs
+		 */
+		if (rc != 0)
+			fotg210_err(fotg210, "can't reschedule qh %p, err %d\n",
+					qh, rc);
+	}
+
+	/* maybe turn off periodic schedule */
+	--fotg210->intr_count;
+	disable_periodic(fotg210);
+}
+
+static int check_period(struct fotg210_hcd *fotg210, unsigned frame,
+		unsigned uframe, unsigned period, unsigned usecs)
+{
+	int claimed;
+
+	/* complete split running into next frame?
+	 * given FSTN support, we could sometimes check...
+	 */
+	if (uframe >= 8)
+		return 0;
+
+	/* convert "usecs we need" to "max already claimed" */
+	usecs = fotg210->uframe_periodic_max - usecs;
+
+	/* we "know" 2 and 4 uframe intervals were rejected; so
+	 * for period 0, check _every_ microframe in the schedule.
+	 */
+	if (unlikely(period == 0)) {
+		do {
+			for (uframe = 0; uframe < 7; uframe++) {
+				claimed = periodic_usecs(fotg210, frame,
+						uframe);
+				if (claimed > usecs)
+					return 0;
+			}
+		} while ((frame += 1) < fotg210->periodic_size);
+
+	/* just check the specified uframe, at that period */
+	} else {
+		do {
+			claimed = periodic_usecs(fotg210, frame, uframe);
+			if (claimed > usecs)
+				return 0;
+		} while ((frame += period) < fotg210->periodic_size);
+	}
+
+	/* success! */
+	return 1;
+}
+
+static int check_intr_schedule(struct fotg210_hcd *fotg210, unsigned frame,
+		unsigned uframe, const struct fotg210_qh *qh, __hc32 *c_maskp)
+{
+	int retval = -ENOSPC;
+	u8 mask = 0;
+
+	if (qh->c_usecs && uframe >= 6)		/* FSTN territory? */
+		goto done;
+
+	if (!check_period(fotg210, frame, uframe, qh->period, qh->usecs))
+		goto done;
+	if (!qh->c_usecs) {
+		retval = 0;
+		*c_maskp = 0;
+		goto done;
+	}
+
+	/* Make sure this tt's buffer is also available for CSPLITs.
+	 * We pessimize a bit; probably the typical full speed case
+	 * doesn't need the second CSPLIT.
+	 *
+	 * NOTE:  both SPLIT and CSPLIT could be checked in just
+	 * one smart pass...
+	 */
+	mask = 0x03 << (uframe + qh->gap_uf);
+	*c_maskp = cpu_to_hc32(fotg210, mask << 8);
+
+	mask |= 1 << uframe;
+	if (tt_no_collision(fotg210, qh->period, qh->dev, frame, mask)) {
+		if (!check_period(fotg210, frame, uframe + qh->gap_uf + 1,
+				qh->period, qh->c_usecs))
+			goto done;
+		if (!check_period(fotg210, frame, uframe + qh->gap_uf,
+				qh->period, qh->c_usecs))
+			goto done;
+		retval = 0;
+	}
+done:
+	return retval;
+}
+
+/* "first fit" scheduling policy used the first time through,
+ * or when the previous schedule slot can't be re-used.
+ */
+static int qh_schedule(struct fotg210_hcd *fotg210, struct fotg210_qh *qh)
+{
+	int status;
+	unsigned uframe;
+	__hc32 c_mask;
+	unsigned frame;	/* 0..(qh->period - 1), or NO_FRAME */
+	struct fotg210_qh_hw *hw = qh->hw;
+
+	qh_refresh(fotg210, qh);
+	hw->hw_next = FOTG210_LIST_END(fotg210);
+	frame = qh->start;
+
+	/* reuse the previous schedule slots, if we can */
+	if (frame < qh->period) {
+		uframe = ffs(hc32_to_cpup(fotg210, &hw->hw_info2) & QH_SMASK);
+		status = check_intr_schedule(fotg210, frame, --uframe,
+				qh, &c_mask);
+	} else {
+		uframe = 0;
+		c_mask = 0;
+		status = -ENOSPC;
+	}
+
+	/* else scan the schedule to find a group of slots such that all
+	 * uframes have enough periodic bandwidth available.
+	 */
+	if (status) {
+		/* "normal" case, uframing flexible except with splits */
+		if (qh->period) {
+			int i;
+
+			for (i = qh->period; status && i > 0; --i) {
+				frame = ++fotg210->random_frame % qh->period;
+				for (uframe = 0; uframe < 8; uframe++) {
+					status = check_intr_schedule(fotg210,
+							frame, uframe, qh,
+							&c_mask);
+					if (status == 0)
+						break;
+				}
+			}
+
+		/* qh->period == 0 means every uframe */
+		} else {
+			frame = 0;
+			status = check_intr_schedule(fotg210, 0, 0, qh,
+					&c_mask);
+		}
+		if (status)
+			goto done;
+		qh->start = frame;
+
+		/* reset S-frame and (maybe) C-frame masks */
+		hw->hw_info2 &= cpu_to_hc32(fotg210, ~(QH_CMASK | QH_SMASK));
+		hw->hw_info2 |= qh->period
+			? cpu_to_hc32(fotg210, 1 << uframe)
+			: cpu_to_hc32(fotg210, QH_SMASK);
+		hw->hw_info2 |= c_mask;
+	} else
+		fotg210_dbg(fotg210, "reused qh %p schedule\n", qh);
+
+	/* stuff into the periodic schedule */
+	qh_link_periodic(fotg210, qh);
+done:
+	return status;
+}
+
+static int intr_submit(struct fotg210_hcd *fotg210, struct urb *urb,
+		struct list_head *qtd_list, gfp_t mem_flags)
+{
+	unsigned epnum;
+	unsigned long flags;
+	struct fotg210_qh *qh;
+	int status;
+	struct list_head empty;
+
+	/* get endpoint and transfer/schedule data */
+	epnum = urb->ep->desc.bEndpointAddress;
+
+	spin_lock_irqsave(&fotg210->lock, flags);
+
+	if (unlikely(!HCD_HW_ACCESSIBLE(fotg210_to_hcd(fotg210)))) {
+		status = -ESHUTDOWN;
+		goto done_not_linked;
+	}
+	status = usb_hcd_link_urb_to_ep(fotg210_to_hcd(fotg210), urb);
+	if (unlikely(status))
+		goto done_not_linked;
+
+	/* get qh and force any scheduling errors */
+	INIT_LIST_HEAD(&empty);
+	qh = qh_append_tds(fotg210, urb, &empty, epnum, &urb->ep->hcpriv);
+	if (qh == NULL) {
+		status = -ENOMEM;
+		goto done;
+	}
+	if (qh->qh_state == QH_STATE_IDLE) {
+		status = qh_schedule(fotg210, qh);
+		if (status)
+			goto done;
+	}
+
+	/* then queue the urb's tds to the qh */
+	qh = qh_append_tds(fotg210, urb, qtd_list, epnum, &urb->ep->hcpriv);
+	BUG_ON(qh == NULL);
+
+	/* ... update usbfs periodic stats */
+	fotg210_to_hcd(fotg210)->self.bandwidth_int_reqs++;
+
+done:
+	if (unlikely(status))
+		usb_hcd_unlink_urb_from_ep(fotg210_to_hcd(fotg210), urb);
+done_not_linked:
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+	if (status)
+		qtd_list_free(fotg210, urb, qtd_list);
+
+	return status;
+}
+
+static void scan_intr(struct fotg210_hcd *fotg210)
+{
+	struct fotg210_qh *qh;
+
+	list_for_each_entry_safe(qh, fotg210->qh_scan_next,
+			&fotg210->intr_qh_list, intr_node) {
+rescan:
+		/* clean any finished work for this qh */
+		if (!list_empty(&qh->qtd_list)) {
+			int temp;
+
+			/*
+			 * Unlinks could happen here; completion reporting
+			 * drops the lock.  That's why fotg210->qh_scan_next
+			 * always holds the next qh to scan; if the next qh
+			 * gets unlinked then fotg210->qh_scan_next is adjusted
+			 * in qh_unlink_periodic().
+			 */
+			temp = qh_completions(fotg210, qh);
+			if (unlikely(qh->needs_rescan ||
+					(list_empty(&qh->qtd_list) &&
+					qh->qh_state == QH_STATE_LINKED)))
+				start_unlink_intr(fotg210, qh);
+			else if (temp != 0)
+				goto rescan;
+		}
+	}
+}
+
+/* fotg210_iso_stream ops work with both ITD and SITD */
+
+static struct fotg210_iso_stream *iso_stream_alloc(gfp_t mem_flags)
+{
+	struct fotg210_iso_stream *stream;
+
+	stream = kzalloc(sizeof(*stream), mem_flags);
+	if (likely(stream != NULL)) {
+		INIT_LIST_HEAD(&stream->td_list);
+		INIT_LIST_HEAD(&stream->free_list);
+		stream->next_uframe = -1;
+	}
+	return stream;
+}
+
+static void iso_stream_init(struct fotg210_hcd *fotg210,
+		struct fotg210_iso_stream *stream, struct usb_device *dev,
+		int pipe, unsigned interval)
+{
+	u32 buf1;
+	unsigned epnum, maxp;
+	int is_input;
+	long bandwidth;
+	unsigned multi;
+	struct usb_host_endpoint *ep;
+
+	/*
+	 * this might be a "high bandwidth" highspeed endpoint,
+	 * as encoded in the ep descriptor's wMaxPacket field
+	 */
+	epnum = usb_pipeendpoint(pipe);
+	is_input = usb_pipein(pipe) ? USB_DIR_IN : 0;
+	ep = usb_pipe_endpoint(dev, pipe);
+	maxp = usb_endpoint_maxp(&ep->desc);
+	if (is_input)
+		buf1 = (1 << 11);
+	else
+		buf1 = 0;
+
+	multi = usb_endpoint_maxp_mult(&ep->desc);
+	buf1 |= maxp;
+	maxp *= multi;
+
+	stream->buf0 = cpu_to_hc32(fotg210, (epnum << 8) | dev->devnum);
+	stream->buf1 = cpu_to_hc32(fotg210, buf1);
+	stream->buf2 = cpu_to_hc32(fotg210, multi);
+
+	/* usbfs wants to report the average usecs per frame tied up
+	 * when transfers on this endpoint are scheduled ...
+	 */
+	if (dev->speed == USB_SPEED_FULL) {
+		interval <<= 3;
+		stream->usecs = NS_TO_US(usb_calc_bus_time(dev->speed,
+				is_input, 1, maxp));
+		stream->usecs /= 8;
+	} else {
+		stream->highspeed = 1;
+		stream->usecs = HS_USECS_ISO(maxp);
+	}
+	bandwidth = stream->usecs * 8;
+	bandwidth /= interval;
+
+	stream->bandwidth = bandwidth;
+	stream->udev = dev;
+	stream->bEndpointAddress = is_input | epnum;
+	stream->interval = interval;
+	stream->maxp = maxp;
+}
+
+static struct fotg210_iso_stream *iso_stream_find(struct fotg210_hcd *fotg210,
+		struct urb *urb)
+{
+	unsigned epnum;
+	struct fotg210_iso_stream *stream;
+	struct usb_host_endpoint *ep;
+	unsigned long flags;
+
+	epnum = usb_pipeendpoint(urb->pipe);
+	if (usb_pipein(urb->pipe))
+		ep = urb->dev->ep_in[epnum];
+	else
+		ep = urb->dev->ep_out[epnum];
+
+	spin_lock_irqsave(&fotg210->lock, flags);
+	stream = ep->hcpriv;
+
+	if (unlikely(stream == NULL)) {
+		stream = iso_stream_alloc(GFP_ATOMIC);
+		if (likely(stream != NULL)) {
+			ep->hcpriv = stream;
+			stream->ep = ep;
+			iso_stream_init(fotg210, stream, urb->dev, urb->pipe,
+					urb->interval);
+		}
+
+	/* if dev->ep[epnum] is a QH, hw is set */
+	} else if (unlikely(stream->hw != NULL)) {
+		fotg210_dbg(fotg210, "dev %s ep%d%s, not iso??\n",
+				urb->dev->devpath, epnum,
+				usb_pipein(urb->pipe) ? "in" : "out");
+		stream = NULL;
+	}
+
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+	return stream;
+}
+
+/* fotg210_iso_sched ops can be ITD-only or SITD-only */
+
+static struct fotg210_iso_sched *iso_sched_alloc(unsigned packets,
+		gfp_t mem_flags)
+{
+	struct fotg210_iso_sched *iso_sched;
+
+	iso_sched = kzalloc(struct_size(iso_sched, packet, packets), mem_flags);
+	if (likely(iso_sched != NULL))
+		INIT_LIST_HEAD(&iso_sched->td_list);
+
+	return iso_sched;
+}
+
+static inline void itd_sched_init(struct fotg210_hcd *fotg210,
+		struct fotg210_iso_sched *iso_sched,
+		struct fotg210_iso_stream *stream, struct urb *urb)
+{
+	unsigned i;
+	dma_addr_t dma = urb->transfer_dma;
+
+	/* how many uframes are needed for these transfers */
+	iso_sched->span = urb->number_of_packets * stream->interval;
+
+	/* figure out per-uframe itd fields that we'll need later
+	 * when we fit new itds into the schedule.
+	 */
+	for (i = 0; i < urb->number_of_packets; i++) {
+		struct fotg210_iso_packet *uframe = &iso_sched->packet[i];
+		unsigned length;
+		dma_addr_t buf;
+		u32 trans;
+
+		length = urb->iso_frame_desc[i].length;
+		buf = dma + urb->iso_frame_desc[i].offset;
+
+		trans = FOTG210_ISOC_ACTIVE;
+		trans |= buf & 0x0fff;
+		if (unlikely(((i + 1) == urb->number_of_packets))
+				&& !(urb->transfer_flags & URB_NO_INTERRUPT))
+			trans |= FOTG210_ITD_IOC;
+		trans |= length << 16;
+		uframe->transaction = cpu_to_hc32(fotg210, trans);
+
+		/* might need to cross a buffer page within a uframe */
+		uframe->bufp = (buf & ~(u64)0x0fff);
+		buf += length;
+		if (unlikely((uframe->bufp != (buf & ~(u64)0x0fff))))
+			uframe->cross = 1;
+	}
+}
+
+static void iso_sched_free(struct fotg210_iso_stream *stream,
+		struct fotg210_iso_sched *iso_sched)
+{
+	if (!iso_sched)
+		return;
+	/* caller must hold fotg210->lock!*/
+	list_splice(&iso_sched->td_list, &stream->free_list);
+	kfree(iso_sched);
+}
+
+static int itd_urb_transaction(struct fotg210_iso_stream *stream,
+		struct fotg210_hcd *fotg210, struct urb *urb, gfp_t mem_flags)
+{
+	struct fotg210_itd *itd;
+	dma_addr_t itd_dma;
+	int i;
+	unsigned num_itds;
+	struct fotg210_iso_sched *sched;
+	unsigned long flags;
+
+	sched = iso_sched_alloc(urb->number_of_packets, mem_flags);
+	if (unlikely(sched == NULL))
+		return -ENOMEM;
+
+	itd_sched_init(fotg210, sched, stream, urb);
+
+	if (urb->interval < 8)
+		num_itds = 1 + (sched->span + 7) / 8;
+	else
+		num_itds = urb->number_of_packets;
+
+	/* allocate/init ITDs */
+	spin_lock_irqsave(&fotg210->lock, flags);
+	for (i = 0; i < num_itds; i++) {
+
+		/*
+		 * Use iTDs from the free list, but not iTDs that may
+		 * still be in use by the hardware.
+		 */
+		if (likely(!list_empty(&stream->free_list))) {
+			itd = list_first_entry(&stream->free_list,
+					struct fotg210_itd, itd_list);
+			if (itd->frame == fotg210->now_frame)
+				goto alloc_itd;
+			list_del(&itd->itd_list);
+			itd_dma = itd->itd_dma;
+		} else {
+alloc_itd:
+			spin_unlock_irqrestore(&fotg210->lock, flags);
+			itd = dma_pool_alloc(fotg210->itd_pool, mem_flags,
+					&itd_dma);
+			spin_lock_irqsave(&fotg210->lock, flags);
+			if (!itd) {
+				iso_sched_free(stream, sched);
+				spin_unlock_irqrestore(&fotg210->lock, flags);
+				return -ENOMEM;
+			}
+		}
+
+		memset(itd, 0, sizeof(*itd));
+		itd->itd_dma = itd_dma;
+		list_add(&itd->itd_list, &sched->td_list);
+	}
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+
+	/* temporarily store schedule info in hcpriv */
+	urb->hcpriv = sched;
+	urb->error_count = 0;
+	return 0;
+}
+
+static inline int itd_slot_ok(struct fotg210_hcd *fotg210, u32 mod, u32 uframe,
+		u8 usecs, u32 period)
+{
+	uframe %= period;
+	do {
+		/* can't commit more than uframe_periodic_max usec */
+		if (periodic_usecs(fotg210, uframe >> 3, uframe & 0x7)
+				> (fotg210->uframe_periodic_max - usecs))
+			return 0;
+
+		/* we know urb->interval is 2^N uframes */
+		uframe += period;
+	} while (uframe < mod);
+	return 1;
+}
+
+/* This scheduler plans almost as far into the future as it has actual
+ * periodic schedule slots.  (Affected by TUNE_FLS, which defaults to
+ * "as small as possible" to be cache-friendlier.)  That limits the size
+ * transfers you can stream reliably; avoid more than 64 msec per urb.
+ * Also avoid queue depths of less than fotg210's worst irq latency (affected
+ * by the per-urb URB_NO_INTERRUPT hint, the log2_irq_thresh module parameter,
+ * and other factors); or more than about 230 msec total (for portability,
+ * given FOTG210_TUNE_FLS and the slop).  Or, write a smarter scheduler!
+ */
+
+#define SCHEDULE_SLOP 80 /* microframes */
+
+static int iso_stream_schedule(struct fotg210_hcd *fotg210, struct urb *urb,
+		struct fotg210_iso_stream *stream)
+{
+	u32 now, next, start, period, span;
+	int status;
+	unsigned mod = fotg210->periodic_size << 3;
+	struct fotg210_iso_sched *sched = urb->hcpriv;
+
+	period = urb->interval;
+	span = sched->span;
+
+	if (span > mod - SCHEDULE_SLOP) {
+		fotg210_dbg(fotg210, "iso request %p too long\n", urb);
+		status = -EFBIG;
+		goto fail;
+	}
+
+	now = fotg210_read_frame_index(fotg210) & (mod - 1);
+
+	/* Typical case: reuse current schedule, stream is still active.
+	 * Hopefully there are no gaps from the host falling behind
+	 * (irq delays etc), but if there are we'll take the next
+	 * slot in the schedule, implicitly assuming URB_ISO_ASAP.
+	 */
+	if (likely(!list_empty(&stream->td_list))) {
+		u32 excess;
+
+		/* For high speed devices, allow scheduling within the
+		 * isochronous scheduling threshold.  For full speed devices
+		 * and Intel PCI-based controllers, don't (work around for
+		 * Intel ICH9 bug).
+		 */
+		if (!stream->highspeed && fotg210->fs_i_thresh)
+			next = now + fotg210->i_thresh;
+		else
+			next = now;
+
+		/* Fell behind (by up to twice the slop amount)?
+		 * We decide based on the time of the last currently-scheduled
+		 * slot, not the time of the next available slot.
+		 */
+		excess = (stream->next_uframe - period - next) & (mod - 1);
+		if (excess >= mod - 2 * SCHEDULE_SLOP)
+			start = next + excess - mod + period *
+					DIV_ROUND_UP(mod - excess, period);
+		else
+			start = next + excess + period;
+		if (start - now >= mod) {
+			fotg210_dbg(fotg210, "request %p would overflow (%d+%d >= %d)\n",
+					urb, start - now - period, period,
+					mod);
+			status = -EFBIG;
+			goto fail;
+		}
+	}
+
+	/* need to schedule; when's the next (u)frame we could start?
+	 * this is bigger than fotg210->i_thresh allows; scheduling itself
+	 * isn't free, the slop should handle reasonably slow cpus.  it
+	 * can also help high bandwidth if the dma and irq loads don't
+	 * jump until after the queue is primed.
+	 */
+	else {
+		int done = 0;
+
+		start = SCHEDULE_SLOP + (now & ~0x07);
+
+		/* NOTE:  assumes URB_ISO_ASAP, to limit complexity/bugs */
+
+		/* find a uframe slot with enough bandwidth.
+		 * Early uframes are more precious because full-speed
+		 * iso IN transfers can't use late uframes,
+		 * and therefore they should be allocated last.
+		 */
+		next = start;
+		start += period;
+		do {
+			start--;
+			/* check schedule: enough space? */
+			if (itd_slot_ok(fotg210, mod, start,
+					stream->usecs, period))
+				done = 1;
+		} while (start > next && !done);
+
+		/* no room in the schedule */
+		if (!done) {
+			fotg210_dbg(fotg210, "iso resched full %p (now %d max %d)\n",
+					urb, now, now + mod);
+			status = -ENOSPC;
+			goto fail;
+		}
+	}
+
+	/* Tried to schedule too far into the future? */
+	if (unlikely(start - now + span - period >=
+			mod - 2 * SCHEDULE_SLOP)) {
+		fotg210_dbg(fotg210, "request %p would overflow (%d+%d >= %d)\n",
+				urb, start - now, span - period,
+				mod - 2 * SCHEDULE_SLOP);
+		status = -EFBIG;
+		goto fail;
+	}
+
+	stream->next_uframe = start & (mod - 1);
+
+	/* report high speed start in uframes; full speed, in frames */
+	urb->start_frame = stream->next_uframe;
+	if (!stream->highspeed)
+		urb->start_frame >>= 3;
+
+	/* Make sure scan_isoc() sees these */
+	if (fotg210->isoc_count == 0)
+		fotg210->next_frame = now >> 3;
+	return 0;
+
+fail:
+	iso_sched_free(stream, sched);
+	urb->hcpriv = NULL;
+	return status;
+}
+
+static inline void itd_init(struct fotg210_hcd *fotg210,
+		struct fotg210_iso_stream *stream, struct fotg210_itd *itd)
+{
+	int i;
+
+	/* it's been recently zeroed */
+	itd->hw_next = FOTG210_LIST_END(fotg210);
+	itd->hw_bufp[0] = stream->buf0;
+	itd->hw_bufp[1] = stream->buf1;
+	itd->hw_bufp[2] = stream->buf2;
+
+	for (i = 0; i < 8; i++)
+		itd->index[i] = -1;
+
+	/* All other fields are filled when scheduling */
+}
+
+static inline void itd_patch(struct fotg210_hcd *fotg210,
+		struct fotg210_itd *itd, struct fotg210_iso_sched *iso_sched,
+		unsigned index, u16 uframe)
+{
+	struct fotg210_iso_packet *uf = &iso_sched->packet[index];
+	unsigned pg = itd->pg;
+
+	uframe &= 0x07;
+	itd->index[uframe] = index;
+
+	itd->hw_transaction[uframe] = uf->transaction;
+	itd->hw_transaction[uframe] |= cpu_to_hc32(fotg210, pg << 12);
+	itd->hw_bufp[pg] |= cpu_to_hc32(fotg210, uf->bufp & ~(u32)0);
+	itd->hw_bufp_hi[pg] |= cpu_to_hc32(fotg210, (u32)(uf->bufp >> 32));
+
+	/* iso_frame_desc[].offset must be strictly increasing */
+	if (unlikely(uf->cross)) {
+		u64 bufp = uf->bufp + 4096;
+
+		itd->pg = ++pg;
+		itd->hw_bufp[pg] |= cpu_to_hc32(fotg210, bufp & ~(u32)0);
+		itd->hw_bufp_hi[pg] |= cpu_to_hc32(fotg210, (u32)(bufp >> 32));
+	}
+}
+
+static inline void itd_link(struct fotg210_hcd *fotg210, unsigned frame,
+		struct fotg210_itd *itd)
+{
+	union fotg210_shadow *prev = &fotg210->pshadow[frame];
+	__hc32 *hw_p = &fotg210->periodic[frame];
+	union fotg210_shadow here = *prev;
+	__hc32 type = 0;
+
+	/* skip any iso nodes which might belong to previous microframes */
+	while (here.ptr) {
+		type = Q_NEXT_TYPE(fotg210, *hw_p);
+		if (type == cpu_to_hc32(fotg210, Q_TYPE_QH))
+			break;
+		prev = periodic_next_shadow(fotg210, prev, type);
+		hw_p = shadow_next_periodic(fotg210, &here, type);
+		here = *prev;
+	}
+
+	itd->itd_next = here;
+	itd->hw_next = *hw_p;
+	prev->itd = itd;
+	itd->frame = frame;
+	wmb();
+	*hw_p = cpu_to_hc32(fotg210, itd->itd_dma | Q_TYPE_ITD);
+}
+
+/* fit urb's itds into the selected schedule slot; activate as needed */
+static void itd_link_urb(struct fotg210_hcd *fotg210, struct urb *urb,
+		unsigned mod, struct fotg210_iso_stream *stream)
+{
+	int packet;
+	unsigned next_uframe, uframe, frame;
+	struct fotg210_iso_sched *iso_sched = urb->hcpriv;
+	struct fotg210_itd *itd;
+
+	next_uframe = stream->next_uframe & (mod - 1);
+
+	if (unlikely(list_empty(&stream->td_list))) {
+		fotg210_to_hcd(fotg210)->self.bandwidth_allocated
+				+= stream->bandwidth;
+		fotg210_dbg(fotg210,
+			"schedule devp %s ep%d%s-iso period %d start %d.%d\n",
+			urb->dev->devpath, stream->bEndpointAddress & 0x0f,
+			(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
+			urb->interval,
+			next_uframe >> 3, next_uframe & 0x7);
+	}
+
+	/* fill iTDs uframe by uframe */
+	for (packet = 0, itd = NULL; packet < urb->number_of_packets;) {
+		if (itd == NULL) {
+			/* ASSERT:  we have all necessary itds */
+
+			/* ASSERT:  no itds for this endpoint in this uframe */
+
+			itd = list_entry(iso_sched->td_list.next,
+					struct fotg210_itd, itd_list);
+			list_move_tail(&itd->itd_list, &stream->td_list);
+			itd->stream = stream;
+			itd->urb = urb;
+			itd_init(fotg210, stream, itd);
+		}
+
+		uframe = next_uframe & 0x07;
+		frame = next_uframe >> 3;
+
+		itd_patch(fotg210, itd, iso_sched, packet, uframe);
+
+		next_uframe += stream->interval;
+		next_uframe &= mod - 1;
+		packet++;
+
+		/* link completed itds into the schedule */
+		if (((next_uframe >> 3) != frame)
+				|| packet == urb->number_of_packets) {
+			itd_link(fotg210, frame & (fotg210->periodic_size - 1),
+					itd);
+			itd = NULL;
+		}
+	}
+	stream->next_uframe = next_uframe;
+
+	/* don't need that schedule data any more */
+	iso_sched_free(stream, iso_sched);
+	urb->hcpriv = NULL;
+
+	++fotg210->isoc_count;
+	enable_periodic(fotg210);
+}
+
+#define ISO_ERRS (FOTG210_ISOC_BUF_ERR | FOTG210_ISOC_BABBLE |\
+		FOTG210_ISOC_XACTERR)
+
+/* Process and recycle a completed ITD.  Return true iff its urb completed,
+ * and hence its completion callback probably added things to the hardware
+ * schedule.
+ *
+ * Note that we carefully avoid recycling this descriptor until after any
+ * completion callback runs, so that it won't be reused quickly.  That is,
+ * assuming (a) no more than two urbs per frame on this endpoint, and also
+ * (b) only this endpoint's completions submit URBs.  It seems some silicon
+ * corrupts things if you reuse completed descriptors very quickly...
+ */
+static bool itd_complete(struct fotg210_hcd *fotg210, struct fotg210_itd *itd)
+{
+	struct urb *urb = itd->urb;
+	struct usb_iso_packet_descriptor *desc;
+	u32 t;
+	unsigned uframe;
+	int urb_index = -1;
+	struct fotg210_iso_stream *stream = itd->stream;
+	struct usb_device *dev;
+	bool retval = false;
+
+	/* for each uframe with a packet */
+	for (uframe = 0; uframe < 8; uframe++) {
+		if (likely(itd->index[uframe] == -1))
+			continue;
+		urb_index = itd->index[uframe];
+		desc = &urb->iso_frame_desc[urb_index];
+
+		t = hc32_to_cpup(fotg210, &itd->hw_transaction[uframe]);
+		itd->hw_transaction[uframe] = 0;
+
+		/* report transfer status */
+		if (unlikely(t & ISO_ERRS)) {
+			urb->error_count++;
+			if (t & FOTG210_ISOC_BUF_ERR)
+				desc->status = usb_pipein(urb->pipe)
+					? -ENOSR  /* hc couldn't read */
+					: -ECOMM; /* hc couldn't write */
+			else if (t & FOTG210_ISOC_BABBLE)
+				desc->status = -EOVERFLOW;
+			else /* (t & FOTG210_ISOC_XACTERR) */
+				desc->status = -EPROTO;
+
+			/* HC need not update length with this error */
+			if (!(t & FOTG210_ISOC_BABBLE)) {
+				desc->actual_length = FOTG210_ITD_LENGTH(t);
+				urb->actual_length += desc->actual_length;
+			}
+		} else if (likely((t & FOTG210_ISOC_ACTIVE) == 0)) {
+			desc->status = 0;
+			desc->actual_length = FOTG210_ITD_LENGTH(t);
+			urb->actual_length += desc->actual_length;
+		} else {
+			/* URB was too late */
+			desc->status = -EXDEV;
+		}
+	}
+
+	/* handle completion now? */
+	if (likely((urb_index + 1) != urb->number_of_packets))
+		goto done;
+
+	/* ASSERT: it's really the last itd for this urb
+	 * list_for_each_entry (itd, &stream->td_list, itd_list)
+	 *	BUG_ON (itd->urb == urb);
+	 */
+
+	/* give urb back to the driver; completion often (re)submits */
+	dev = urb->dev;
+	fotg210_urb_done(fotg210, urb, 0);
+	retval = true;
+	urb = NULL;
+
+	--fotg210->isoc_count;
+	disable_periodic(fotg210);
+
+	if (unlikely(list_is_singular(&stream->td_list))) {
+		fotg210_to_hcd(fotg210)->self.bandwidth_allocated
+				-= stream->bandwidth;
+		fotg210_dbg(fotg210,
+			"deschedule devp %s ep%d%s-iso\n",
+			dev->devpath, stream->bEndpointAddress & 0x0f,
+			(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out");
+	}
+
+done:
+	itd->urb = NULL;
+
+	/* Add to the end of the free list for later reuse */
+	list_move_tail(&itd->itd_list, &stream->free_list);
+
+	/* Recycle the iTDs when the pipeline is empty (ep no longer in use) */
+	if (list_empty(&stream->td_list)) {
+		list_splice_tail_init(&stream->free_list,
+				&fotg210->cached_itd_list);
+		start_free_itds(fotg210);
+	}
+
+	return retval;
+}
+
+static int itd_submit(struct fotg210_hcd *fotg210, struct urb *urb,
+		gfp_t mem_flags)
+{
+	int status = -EINVAL;
+	unsigned long flags;
+	struct fotg210_iso_stream *stream;
+
+	/* Get iso_stream head */
+	stream = iso_stream_find(fotg210, urb);
+	if (unlikely(stream == NULL)) {
+		fotg210_dbg(fotg210, "can't get iso stream\n");
+		return -ENOMEM;
+	}
+	if (unlikely(urb->interval != stream->interval &&
+			fotg210_port_speed(fotg210, 0) ==
+			USB_PORT_STAT_HIGH_SPEED)) {
+		fotg210_dbg(fotg210, "can't change iso interval %d --> %d\n",
+				stream->interval, urb->interval);
+		goto done;
+	}
+
+#ifdef FOTG210_URB_TRACE
+	fotg210_dbg(fotg210,
+			"%s %s urb %p ep%d%s len %d, %d pkts %d uframes[%p]\n",
+			__func__, urb->dev->devpath, urb,
+			usb_pipeendpoint(urb->pipe),
+			usb_pipein(urb->pipe) ? "in" : "out",
+			urb->transfer_buffer_length,
+			urb->number_of_packets, urb->interval,
+			stream);
+#endif
+
+	/* allocate ITDs w/o locking anything */
+	status = itd_urb_transaction(stream, fotg210, urb, mem_flags);
+	if (unlikely(status < 0)) {
+		fotg210_dbg(fotg210, "can't init itds\n");
+		goto done;
+	}
+
+	/* schedule ... need to lock */
+	spin_lock_irqsave(&fotg210->lock, flags);
+	if (unlikely(!HCD_HW_ACCESSIBLE(fotg210_to_hcd(fotg210)))) {
+		status = -ESHUTDOWN;
+		goto done_not_linked;
+	}
+	status = usb_hcd_link_urb_to_ep(fotg210_to_hcd(fotg210), urb);
+	if (unlikely(status))
+		goto done_not_linked;
+	status = iso_stream_schedule(fotg210, urb, stream);
+	if (likely(status == 0))
+		itd_link_urb(fotg210, urb, fotg210->periodic_size << 3, stream);
+	else
+		usb_hcd_unlink_urb_from_ep(fotg210_to_hcd(fotg210), urb);
+done_not_linked:
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+done:
+	return status;
+}
+
+static inline int scan_frame_queue(struct fotg210_hcd *fotg210, unsigned frame,
+		unsigned now_frame, bool live)
+{
+	unsigned uf;
+	bool modified;
+	union fotg210_shadow q, *q_p;
+	__hc32 type, *hw_p;
+
+	/* scan each element in frame's queue for completions */
+	q_p = &fotg210->pshadow[frame];
+	hw_p = &fotg210->periodic[frame];
+	q.ptr = q_p->ptr;
+	type = Q_NEXT_TYPE(fotg210, *hw_p);
+	modified = false;
+
+	while (q.ptr) {
+		switch (hc32_to_cpu(fotg210, type)) {
+		case Q_TYPE_ITD:
+			/* If this ITD is still active, leave it for
+			 * later processing ... check the next entry.
+			 * No need to check for activity unless the
+			 * frame is current.
+			 */
+			if (frame == now_frame && live) {
+				rmb();
+				for (uf = 0; uf < 8; uf++) {
+					if (q.itd->hw_transaction[uf] &
+							ITD_ACTIVE(fotg210))
+						break;
+				}
+				if (uf < 8) {
+					q_p = &q.itd->itd_next;
+					hw_p = &q.itd->hw_next;
+					type = Q_NEXT_TYPE(fotg210,
+							q.itd->hw_next);
+					q = *q_p;
+					break;
+				}
+			}
+
+			/* Take finished ITDs out of the schedule
+			 * and process them:  recycle, maybe report
+			 * URB completion.  HC won't cache the
+			 * pointer for much longer, if at all.
+			 */
+			*q_p = q.itd->itd_next;
+			*hw_p = q.itd->hw_next;
+			type = Q_NEXT_TYPE(fotg210, q.itd->hw_next);
+			wmb();
+			modified = itd_complete(fotg210, q.itd);
+			q = *q_p;
+			break;
+		default:
+			fotg210_dbg(fotg210, "corrupt type %d frame %d shadow %p\n",
+					type, frame, q.ptr);
+			fallthrough;
+		case Q_TYPE_QH:
+		case Q_TYPE_FSTN:
+			/* End of the iTDs and siTDs */
+			q.ptr = NULL;
+			break;
+		}
+
+		/* assume completion callbacks modify the queue */
+		if (unlikely(modified && fotg210->isoc_count > 0))
+			return -EINVAL;
+	}
+	return 0;
+}
+
+static void scan_isoc(struct fotg210_hcd *fotg210)
+{
+	unsigned uf, now_frame, frame, ret;
+	unsigned fmask = fotg210->periodic_size - 1;
+	bool live;
+
+	/*
+	 * When running, scan from last scan point up to "now"
+	 * else clean up by scanning everything that's left.
+	 * Touches as few pages as possible:  cache-friendly.
+	 */
+	if (fotg210->rh_state >= FOTG210_RH_RUNNING) {
+		uf = fotg210_read_frame_index(fotg210);
+		now_frame = (uf >> 3) & fmask;
+		live = true;
+	} else  {
+		now_frame = (fotg210->next_frame - 1) & fmask;
+		live = false;
+	}
+	fotg210->now_frame = now_frame;
+
+	frame = fotg210->next_frame;
+	for (;;) {
+		ret = 1;
+		while (ret != 0)
+			ret = scan_frame_queue(fotg210, frame,
+					now_frame, live);
+
+		/* Stop when we have reached the current frame */
+		if (frame == now_frame)
+			break;
+		frame = (frame + 1) & fmask;
+	}
+	fotg210->next_frame = now_frame;
+}
+
+/* Display / Set uframe_periodic_max
+ */
+static ssize_t uframe_periodic_max_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct fotg210_hcd *fotg210;
+	int n;
+
+	fotg210 = hcd_to_fotg210(bus_to_hcd(dev_get_drvdata(dev)));
+	n = scnprintf(buf, PAGE_SIZE, "%d\n", fotg210->uframe_periodic_max);
+	return n;
+}
+
+
+static ssize_t uframe_periodic_max_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct fotg210_hcd *fotg210;
+	unsigned uframe_periodic_max;
+	unsigned frame, uframe;
+	unsigned short allocated_max;
+	unsigned long flags;
+	ssize_t ret;
+
+	fotg210 = hcd_to_fotg210(bus_to_hcd(dev_get_drvdata(dev)));
+	if (kstrtouint(buf, 0, &uframe_periodic_max) < 0)
+		return -EINVAL;
+
+	if (uframe_periodic_max < 100 || uframe_periodic_max >= 125) {
+		fotg210_info(fotg210, "rejecting invalid request for uframe_periodic_max=%u\n",
+				uframe_periodic_max);
+		return -EINVAL;
+	}
+
+	ret = -EINVAL;
+
+	/*
+	 * lock, so that our checking does not race with possible periodic
+	 * bandwidth allocation through submitting new urbs.
+	 */
+	spin_lock_irqsave(&fotg210->lock, flags);
+
+	/*
+	 * for request to decrease max periodic bandwidth, we have to check
+	 * every microframe in the schedule to see whether the decrease is
+	 * possible.
+	 */
+	if (uframe_periodic_max < fotg210->uframe_periodic_max) {
+		allocated_max = 0;
+
+		for (frame = 0; frame < fotg210->periodic_size; ++frame)
+			for (uframe = 0; uframe < 7; ++uframe)
+				allocated_max = max(allocated_max,
+						periodic_usecs(fotg210, frame,
+						uframe));
+
+		if (allocated_max > uframe_periodic_max) {
+			fotg210_info(fotg210,
+					"cannot decrease uframe_periodic_max because periodic bandwidth is already allocated (%u > %u)\n",
+					allocated_max, uframe_periodic_max);
+			goto out_unlock;
+		}
+	}
+
+	/* increasing is always ok */
+
+	fotg210_info(fotg210,
+			"setting max periodic bandwidth to %u%% (== %u usec/uframe)\n",
+			100 * uframe_periodic_max/125, uframe_periodic_max);
+
+	if (uframe_periodic_max != 100)
+		fotg210_warn(fotg210, "max periodic bandwidth set is non-standard\n");
+
+	fotg210->uframe_periodic_max = uframe_periodic_max;
+	ret = count;
+
+out_unlock:
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+	return ret;
+}
+
+static DEVICE_ATTR_RW(uframe_periodic_max);
+
+static inline int create_sysfs_files(struct fotg210_hcd *fotg210)
+{
+	struct device *controller = fotg210_to_hcd(fotg210)->self.controller;
+
+	return device_create_file(controller, &dev_attr_uframe_periodic_max);
+}
+
+static inline void remove_sysfs_files(struct fotg210_hcd *fotg210)
+{
+	struct device *controller = fotg210_to_hcd(fotg210)->self.controller;
+
+	device_remove_file(controller, &dev_attr_uframe_periodic_max);
+}
+/* On some systems, leaving remote wakeup enabled prevents system shutdown.
+ * The firmware seems to think that powering off is a wakeup event!
+ * This routine turns off remote wakeup and everything else, on all ports.
+ */
+static void fotg210_turn_off_all_ports(struct fotg210_hcd *fotg210)
+{
+	u32 __iomem *status_reg = &fotg210->regs->port_status;
+
+	fotg210_writel(fotg210, PORT_RWC_BITS, status_reg);
+}
+
+/* Halt HC, turn off all ports, and let the BIOS use the companion controllers.
+ * Must be called with interrupts enabled and the lock not held.
+ */
+static void fotg210_silence_controller(struct fotg210_hcd *fotg210)
+{
+	fotg210_halt(fotg210);
+
+	spin_lock_irq(&fotg210->lock);
+	fotg210->rh_state = FOTG210_RH_HALTED;
+	fotg210_turn_off_all_ports(fotg210);
+	spin_unlock_irq(&fotg210->lock);
+}
+
+/* fotg210_shutdown kick in for silicon on any bus (not just pci, etc).
+ * This forcibly disables dma and IRQs, helping kexec and other cases
+ * where the next system software may expect clean state.
+ */
+static void fotg210_shutdown(struct usb_hcd *hcd)
+{
+	struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
+
+	spin_lock_irq(&fotg210->lock);
+	fotg210->shutdown = true;
+	fotg210->rh_state = FOTG210_RH_STOPPING;
+	fotg210->enabled_hrtimer_events = 0;
+	spin_unlock_irq(&fotg210->lock);
+
+	fotg210_silence_controller(fotg210);
+
+	hrtimer_cancel(&fotg210->hrtimer);
+}
+
+/* fotg210_work is called from some interrupts, timers, and so on.
+ * it calls driver completion functions, after dropping fotg210->lock.
+ */
+static void fotg210_work(struct fotg210_hcd *fotg210)
+{
+	/* another CPU may drop fotg210->lock during a schedule scan while
+	 * it reports urb completions.  this flag guards against bogus
+	 * attempts at re-entrant schedule scanning.
+	 */
+	if (fotg210->scanning) {
+		fotg210->need_rescan = true;
+		return;
+	}
+	fotg210->scanning = true;
+
+rescan:
+	fotg210->need_rescan = false;
+	if (fotg210->async_count)
+		scan_async(fotg210);
+	if (fotg210->intr_count > 0)
+		scan_intr(fotg210);
+	if (fotg210->isoc_count > 0)
+		scan_isoc(fotg210);
+	if (fotg210->need_rescan)
+		goto rescan;
+	fotg210->scanning = false;
+
+	/* the IO watchdog guards against hardware or driver bugs that
+	 * misplace IRQs, and should let us run completely without IRQs.
+	 * such lossage has been observed on both VT6202 and VT8235.
+	 */
+	turn_on_io_watchdog(fotg210);
+}
+
+/* Called when the fotg210_hcd module is removed.
+ */
+static void fotg210_stop(struct usb_hcd *hcd)
+{
+	struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
+
+	fotg210_dbg(fotg210, "stop\n");
+
+	/* no more interrupts ... */
+
+	spin_lock_irq(&fotg210->lock);
+	fotg210->enabled_hrtimer_events = 0;
+	spin_unlock_irq(&fotg210->lock);
+
+	fotg210_quiesce(fotg210);
+	fotg210_silence_controller(fotg210);
+	fotg210_reset(fotg210);
+
+	hrtimer_cancel(&fotg210->hrtimer);
+	remove_sysfs_files(fotg210);
+	remove_debug_files(fotg210);
+
+	/* root hub is shut down separately (first, when possible) */
+	spin_lock_irq(&fotg210->lock);
+	end_free_itds(fotg210);
+	spin_unlock_irq(&fotg210->lock);
+	fotg210_mem_cleanup(fotg210);
+
+#ifdef FOTG210_STATS
+	fotg210_dbg(fotg210, "irq normal %ld err %ld iaa %ld (lost %ld)\n",
+			fotg210->stats.normal, fotg210->stats.error,
+			fotg210->stats.iaa, fotg210->stats.lost_iaa);
+	fotg210_dbg(fotg210, "complete %ld unlink %ld\n",
+			fotg210->stats.complete, fotg210->stats.unlink);
+#endif
+
+	dbg_status(fotg210, "fotg210_stop completed",
+			fotg210_readl(fotg210, &fotg210->regs->status));
+}
+
+/* one-time init, only for memory state */
+static int hcd_fotg210_init(struct usb_hcd *hcd)
+{
+	struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
+	u32 temp;
+	int retval;
+	u32 hcc_params;
+	struct fotg210_qh_hw *hw;
+
+	spin_lock_init(&fotg210->lock);
+
+	/*
+	 * keep io watchdog by default, those good HCDs could turn off it later
+	 */
+	fotg210->need_io_watchdog = 1;
+
+	hrtimer_init(&fotg210->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+	fotg210->hrtimer.function = fotg210_hrtimer_func;
+	fotg210->next_hrtimer_event = FOTG210_HRTIMER_NO_EVENT;
+
+	hcc_params = fotg210_readl(fotg210, &fotg210->caps->hcc_params);
+
+	/*
+	 * by default set standard 80% (== 100 usec/uframe) max periodic
+	 * bandwidth as required by USB 2.0
+	 */
+	fotg210->uframe_periodic_max = 100;
+
+	/*
+	 * hw default: 1K periodic list heads, one per frame.
+	 * periodic_size can shrink by USBCMD update if hcc_params allows.
+	 */
+	fotg210->periodic_size = DEFAULT_I_TDPS;
+	INIT_LIST_HEAD(&fotg210->intr_qh_list);
+	INIT_LIST_HEAD(&fotg210->cached_itd_list);
+
+	if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
+		/* periodic schedule size can be smaller than default */
+		switch (FOTG210_TUNE_FLS) {
+		case 0:
+			fotg210->periodic_size = 1024;
+			break;
+		case 1:
+			fotg210->periodic_size = 512;
+			break;
+		case 2:
+			fotg210->periodic_size = 256;
+			break;
+		default:
+			BUG();
+		}
+	}
+	retval = fotg210_mem_init(fotg210, GFP_KERNEL);
+	if (retval < 0)
+		return retval;
+
+	/* controllers may cache some of the periodic schedule ... */
+	fotg210->i_thresh = 2;
+
+	/*
+	 * dedicate a qh for the async ring head, since we couldn't unlink
+	 * a 'real' qh without stopping the async schedule [4.8].  use it
+	 * as the 'reclamation list head' too.
+	 * its dummy is used in hw_alt_next of many tds, to prevent the qh
+	 * from automatically advancing to the next td after short reads.
+	 */
+	fotg210->async->qh_next.qh = NULL;
+	hw = fotg210->async->hw;
+	hw->hw_next = QH_NEXT(fotg210, fotg210->async->qh_dma);
+	hw->hw_info1 = cpu_to_hc32(fotg210, QH_HEAD);
+	hw->hw_token = cpu_to_hc32(fotg210, QTD_STS_HALT);
+	hw->hw_qtd_next = FOTG210_LIST_END(fotg210);
+	fotg210->async->qh_state = QH_STATE_LINKED;
+	hw->hw_alt_next = QTD_NEXT(fotg210, fotg210->async->dummy->qtd_dma);
+
+	/* clear interrupt enables, set irq latency */
+	if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
+		log2_irq_thresh = 0;
+	temp = 1 << (16 + log2_irq_thresh);
+	if (HCC_CANPARK(hcc_params)) {
+		/* HW default park == 3, on hardware that supports it (like
+		 * NVidia and ALI silicon), maximizes throughput on the async
+		 * schedule by avoiding QH fetches between transfers.
+		 *
+		 * With fast usb storage devices and NForce2, "park" seems to
+		 * make problems:  throughput reduction (!), data errors...
+		 */
+		if (park) {
+			park = min_t(unsigned, park, 3);
+			temp |= CMD_PARK;
+			temp |= park << 8;
+		}
+		fotg210_dbg(fotg210, "park %d\n", park);
+	}
+	if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
+		/* periodic schedule size can be smaller than default */
+		temp &= ~(3 << 2);
+		temp |= (FOTG210_TUNE_FLS << 2);
+	}
+	fotg210->command = temp;
+
+	/* Accept arbitrarily long scatter-gather lists */
+	if (!hcd->localmem_pool)
+		hcd->self.sg_tablesize = ~0;
+	return 0;
+}
+
+/* start HC running; it's halted, hcd_fotg210_init() has been run (once) */
+static int fotg210_run(struct usb_hcd *hcd)
+{
+	struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
+	u32 temp;
+
+	hcd->uses_new_polling = 1;
+
+	/* EHCI spec section 4.1 */
+
+	fotg210_writel(fotg210, fotg210->periodic_dma,
+			&fotg210->regs->frame_list);
+	fotg210_writel(fotg210, (u32)fotg210->async->qh_dma,
+			&fotg210->regs->async_next);
+
+	/*
+	 * hcc_params controls whether fotg210->regs->segment must (!!!)
+	 * be used; it constrains QH/ITD/SITD and QTD locations.
+	 * dma_pool consistent memory always uses segment zero.
+	 * streaming mappings for I/O buffers, like dma_map_single(),
+	 * can return segments above 4GB, if the device allows.
+	 *
+	 * NOTE:  the dma mask is visible through dev->dma_mask, so
+	 * drivers can pass this info along ... like NETIF_F_HIGHDMA,
+	 * Scsi_Host.highmem_io, and so forth.  It's readonly to all
+	 * host side drivers though.
+	 */
+	fotg210_readl(fotg210, &fotg210->caps->hcc_params);
+
+	/*
+	 * Philips, Intel, and maybe others need CMD_RUN before the
+	 * root hub will detect new devices (why?); NEC doesn't
+	 */
+	fotg210->command &= ~(CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
+	fotg210->command |= CMD_RUN;
+	fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command);
+	dbg_cmd(fotg210, "init", fotg210->command);
+
+	/*
+	 * Start, enabling full USB 2.0 functionality ... usb 1.1 devices
+	 * are explicitly handed to companion controller(s), so no TT is
+	 * involved with the root hub.  (Except where one is integrated,
+	 * and there's no companion controller unless maybe for USB OTG.)
+	 *
+	 * Turning on the CF flag will transfer ownership of all ports
+	 * from the companions to the EHCI controller.  If any of the
+	 * companions are in the middle of a port reset at the time, it
+	 * could cause trouble.  Write-locking ehci_cf_port_reset_rwsem
+	 * guarantees that no resets are in progress.  After we set CF,
+	 * a short delay lets the hardware catch up; new resets shouldn't
+	 * be started before the port switching actions could complete.
+	 */
+	down_write(&ehci_cf_port_reset_rwsem);
+	fotg210->rh_state = FOTG210_RH_RUNNING;
+	/* unblock posted writes */
+	fotg210_readl(fotg210, &fotg210->regs->command);
+	usleep_range(5000, 10000);
+	up_write(&ehci_cf_port_reset_rwsem);
+	fotg210->last_periodic_enable = ktime_get_real();
+
+	temp = HC_VERSION(fotg210,
+			fotg210_readl(fotg210, &fotg210->caps->hc_capbase));
+	fotg210_info(fotg210,
+			"USB %x.%x started, EHCI %x.%02x\n",
+			((fotg210->sbrn & 0xf0) >> 4), (fotg210->sbrn & 0x0f),
+			temp >> 8, temp & 0xff);
+
+	fotg210_writel(fotg210, INTR_MASK,
+			&fotg210->regs->intr_enable); /* Turn On Interrupts */
+
+	/* GRR this is run-once init(), being done every time the HC starts.
+	 * So long as they're part of class devices, we can't do it init()
+	 * since the class device isn't created that early.
+	 */
+	create_debug_files(fotg210);
+	create_sysfs_files(fotg210);
+
+	return 0;
+}
+
+static int fotg210_setup(struct usb_hcd *hcd)
+{
+	struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
+	int retval;
+
+	fotg210->regs = (void __iomem *)fotg210->caps +
+			HC_LENGTH(fotg210,
+			fotg210_readl(fotg210, &fotg210->caps->hc_capbase));
+	dbg_hcs_params(fotg210, "reset");
+	dbg_hcc_params(fotg210, "reset");
+
+	/* cache this readonly data; minimize chip reads */
+	fotg210->hcs_params = fotg210_readl(fotg210,
+			&fotg210->caps->hcs_params);
+
+	fotg210->sbrn = HCD_USB2;
+
+	/* data structure init */
+	retval = hcd_fotg210_init(hcd);
+	if (retval)
+		return retval;
+
+	retval = fotg210_halt(fotg210);
+	if (retval)
+		return retval;
+
+	fotg210_reset(fotg210);
+
+	return 0;
+}
+
+static irqreturn_t fotg210_irq(struct usb_hcd *hcd)
+{
+	struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
+	u32 status, masked_status, pcd_status = 0, cmd;
+	int bh;
+
+	spin_lock(&fotg210->lock);
+
+	status = fotg210_readl(fotg210, &fotg210->regs->status);
+
+	/* e.g. cardbus physical eject */
+	if (status == ~(u32) 0) {
+		fotg210_dbg(fotg210, "device removed\n");
+		goto dead;
+	}
+
+	/*
+	 * We don't use STS_FLR, but some controllers don't like it to
+	 * remain on, so mask it out along with the other status bits.
+	 */
+	masked_status = status & (INTR_MASK | STS_FLR);
+
+	/* Shared IRQ? */
+	if (!masked_status ||
+			unlikely(fotg210->rh_state == FOTG210_RH_HALTED)) {
+		spin_unlock(&fotg210->lock);
+		return IRQ_NONE;
+	}
+
+	/* clear (just) interrupts */
+	fotg210_writel(fotg210, masked_status, &fotg210->regs->status);
+	cmd = fotg210_readl(fotg210, &fotg210->regs->command);
+	bh = 0;
+
+	/* unrequested/ignored: Frame List Rollover */
+	dbg_status(fotg210, "irq", status);
+
+	/* INT, ERR, and IAA interrupt rates can be throttled */
+
+	/* normal [4.15.1.2] or error [4.15.1.1] completion */
+	if (likely((status & (STS_INT|STS_ERR)) != 0)) {
+		if (likely((status & STS_ERR) == 0))
+			INCR(fotg210->stats.normal);
+		else
+			INCR(fotg210->stats.error);
+		bh = 1;
+	}
+
+	/* complete the unlinking of some qh [4.15.2.3] */
+	if (status & STS_IAA) {
+
+		/* Turn off the IAA watchdog */
+		fotg210->enabled_hrtimer_events &=
+			~BIT(FOTG210_HRTIMER_IAA_WATCHDOG);
+
+		/*
+		 * Mild optimization: Allow another IAAD to reset the
+		 * hrtimer, if one occurs before the next expiration.
+		 * In theory we could always cancel the hrtimer, but
+		 * tests show that about half the time it will be reset
+		 * for some other event anyway.
+		 */
+		if (fotg210->next_hrtimer_event == FOTG210_HRTIMER_IAA_WATCHDOG)
+			++fotg210->next_hrtimer_event;
+
+		/* guard against (alleged) silicon errata */
+		if (cmd & CMD_IAAD)
+			fotg210_dbg(fotg210, "IAA with IAAD still set?\n");
+		if (fotg210->async_iaa) {
+			INCR(fotg210->stats.iaa);
+			end_unlink_async(fotg210);
+		} else
+			fotg210_dbg(fotg210, "IAA with nothing unlinked?\n");
+	}
+
+	/* remote wakeup [4.3.1] */
+	if (status & STS_PCD) {
+		int pstatus;
+		u32 __iomem *status_reg = &fotg210->regs->port_status;
+
+		/* kick root hub later */
+		pcd_status = status;
+
+		/* resume root hub? */
+		if (fotg210->rh_state == FOTG210_RH_SUSPENDED)
+			usb_hcd_resume_root_hub(hcd);
+
+		pstatus = fotg210_readl(fotg210, status_reg);
+
+		if (test_bit(0, &fotg210->suspended_ports) &&
+				((pstatus & PORT_RESUME) ||
+				!(pstatus & PORT_SUSPEND)) &&
+				(pstatus & PORT_PE) &&
+				fotg210->reset_done[0] == 0) {
+
+			/* start 20 msec resume signaling from this port,
+			 * and make hub_wq collect PORT_STAT_C_SUSPEND to
+			 * stop that signaling.  Use 5 ms extra for safety,
+			 * like usb_port_resume() does.
+			 */
+			fotg210->reset_done[0] = jiffies + msecs_to_jiffies(25);
+			set_bit(0, &fotg210->resuming_ports);
+			fotg210_dbg(fotg210, "port 1 remote wakeup\n");
+			mod_timer(&hcd->rh_timer, fotg210->reset_done[0]);
+		}
+	}
+
+	/* PCI errors [4.15.2.4] */
+	if (unlikely((status & STS_FATAL) != 0)) {
+		fotg210_err(fotg210, "fatal error\n");
+		dbg_cmd(fotg210, "fatal", cmd);
+		dbg_status(fotg210, "fatal", status);
+dead:
+		usb_hc_died(hcd);
+
+		/* Don't let the controller do anything more */
+		fotg210->shutdown = true;
+		fotg210->rh_state = FOTG210_RH_STOPPING;
+		fotg210->command &= ~(CMD_RUN | CMD_ASE | CMD_PSE);
+		fotg210_writel(fotg210, fotg210->command,
+				&fotg210->regs->command);
+		fotg210_writel(fotg210, 0, &fotg210->regs->intr_enable);
+		fotg210_handle_controller_death(fotg210);
+
+		/* Handle completions when the controller stops */
+		bh = 0;
+	}
+
+	if (bh)
+		fotg210_work(fotg210);
+	spin_unlock(&fotg210->lock);
+	if (pcd_status)
+		usb_hcd_poll_rh_status(hcd);
+	return IRQ_HANDLED;
+}
+
+/* non-error returns are a promise to giveback() the urb later
+ * we drop ownership so next owner (or urb unlink) can get it
+ *
+ * urb + dev is in hcd.self.controller.urb_list
+ * we're queueing TDs onto software and hardware lists
+ *
+ * hcd-specific init for hcpriv hasn't been done yet
+ *
+ * NOTE:  control, bulk, and interrupt share the same code to append TDs
+ * to a (possibly active) QH, and the same QH scanning code.
+ */
+static int fotg210_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+		gfp_t mem_flags)
+{
+	struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
+	struct list_head qtd_list;
+
+	INIT_LIST_HEAD(&qtd_list);
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_CONTROL:
+		/* qh_completions() code doesn't handle all the fault cases
+		 * in multi-TD control transfers.  Even 1KB is rare anyway.
+		 */
+		if (urb->transfer_buffer_length > (16 * 1024))
+			return -EMSGSIZE;
+		fallthrough;
+	/* case PIPE_BULK: */
+	default:
+		if (!qh_urb_transaction(fotg210, urb, &qtd_list, mem_flags))
+			return -ENOMEM;
+		return submit_async(fotg210, urb, &qtd_list, mem_flags);
+
+	case PIPE_INTERRUPT:
+		if (!qh_urb_transaction(fotg210, urb, &qtd_list, mem_flags))
+			return -ENOMEM;
+		return intr_submit(fotg210, urb, &qtd_list, mem_flags);
+
+	case PIPE_ISOCHRONOUS:
+		return itd_submit(fotg210, urb, mem_flags);
+	}
+}
+
+/* remove from hardware lists
+ * completions normally happen asynchronously
+ */
+
+static int fotg210_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
+	struct fotg210_qh *qh;
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&fotg210->lock, flags);
+	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (rc)
+		goto done;
+
+	switch (usb_pipetype(urb->pipe)) {
+	/* case PIPE_CONTROL: */
+	/* case PIPE_BULK:*/
+	default:
+		qh = (struct fotg210_qh *) urb->hcpriv;
+		if (!qh)
+			break;
+		switch (qh->qh_state) {
+		case QH_STATE_LINKED:
+		case QH_STATE_COMPLETING:
+			start_unlink_async(fotg210, qh);
+			break;
+		case QH_STATE_UNLINK:
+		case QH_STATE_UNLINK_WAIT:
+			/* already started */
+			break;
+		case QH_STATE_IDLE:
+			/* QH might be waiting for a Clear-TT-Buffer */
+			qh_completions(fotg210, qh);
+			break;
+		}
+		break;
+
+	case PIPE_INTERRUPT:
+		qh = (struct fotg210_qh *) urb->hcpriv;
+		if (!qh)
+			break;
+		switch (qh->qh_state) {
+		case QH_STATE_LINKED:
+		case QH_STATE_COMPLETING:
+			start_unlink_intr(fotg210, qh);
+			break;
+		case QH_STATE_IDLE:
+			qh_completions(fotg210, qh);
+			break;
+		default:
+			fotg210_dbg(fotg210, "bogus qh %p state %d\n",
+					qh, qh->qh_state);
+			goto done;
+		}
+		break;
+
+	case PIPE_ISOCHRONOUS:
+		/* itd... */
+
+		/* wait till next completion, do it then. */
+		/* completion irqs can wait up to 1024 msec, */
+		break;
+	}
+done:
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+	return rc;
+}
+
+/* bulk qh holds the data toggle */
+
+static void fotg210_endpoint_disable(struct usb_hcd *hcd,
+		struct usb_host_endpoint *ep)
+{
+	struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
+	unsigned long flags;
+	struct fotg210_qh *qh, *tmp;
+
+	/* ASSERT:  any requests/urbs are being unlinked */
+	/* ASSERT:  nobody can be submitting urbs for this any more */
+
+rescan:
+	spin_lock_irqsave(&fotg210->lock, flags);
+	qh = ep->hcpriv;
+	if (!qh)
+		goto done;
+
+	/* endpoints can be iso streams.  for now, we don't
+	 * accelerate iso completions ... so spin a while.
+	 */
+	if (qh->hw == NULL) {
+		struct fotg210_iso_stream *stream = ep->hcpriv;
+
+		if (!list_empty(&stream->td_list))
+			goto idle_timeout;
+
+		/* BUG_ON(!list_empty(&stream->free_list)); */
+		kfree(stream);
+		goto done;
+	}
+
+	if (fotg210->rh_state < FOTG210_RH_RUNNING)
+		qh->qh_state = QH_STATE_IDLE;
+	switch (qh->qh_state) {
+	case QH_STATE_LINKED:
+	case QH_STATE_COMPLETING:
+		for (tmp = fotg210->async->qh_next.qh;
+				tmp && tmp != qh;
+				tmp = tmp->qh_next.qh)
+			continue;
+		/* periodic qh self-unlinks on empty, and a COMPLETING qh
+		 * may already be unlinked.
+		 */
+		if (tmp)
+			start_unlink_async(fotg210, qh);
+		fallthrough;
+	case QH_STATE_UNLINK:		/* wait for hw to finish? */
+	case QH_STATE_UNLINK_WAIT:
+idle_timeout:
+		spin_unlock_irqrestore(&fotg210->lock, flags);
+		schedule_timeout_uninterruptible(1);
+		goto rescan;
+	case QH_STATE_IDLE:		/* fully unlinked */
+		if (qh->clearing_tt)
+			goto idle_timeout;
+		if (list_empty(&qh->qtd_list)) {
+			qh_destroy(fotg210, qh);
+			break;
+		}
+		fallthrough;
+	default:
+		/* caller was supposed to have unlinked any requests;
+		 * that's not our job.  just leak this memory.
+		 */
+		fotg210_err(fotg210, "qh %p (#%02x) state %d%s\n",
+				qh, ep->desc.bEndpointAddress, qh->qh_state,
+				list_empty(&qh->qtd_list) ? "" : "(has tds)");
+		break;
+	}
+done:
+	ep->hcpriv = NULL;
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+}
+
+static void fotg210_endpoint_reset(struct usb_hcd *hcd,
+		struct usb_host_endpoint *ep)
+{
+	struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
+	struct fotg210_qh *qh;
+	int eptype = usb_endpoint_type(&ep->desc);
+	int epnum = usb_endpoint_num(&ep->desc);
+	int is_out = usb_endpoint_dir_out(&ep->desc);
+	unsigned long flags;
+
+	if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
+		return;
+
+	spin_lock_irqsave(&fotg210->lock, flags);
+	qh = ep->hcpriv;
+
+	/* For Bulk and Interrupt endpoints we maintain the toggle state
+	 * in the hardware; the toggle bits in udev aren't used at all.
+	 * When an endpoint is reset by usb_clear_halt() we must reset
+	 * the toggle bit in the QH.
+	 */
+	if (qh) {
+		usb_settoggle(qh->dev, epnum, is_out, 0);
+		if (!list_empty(&qh->qtd_list)) {
+			WARN_ONCE(1, "clear_halt for a busy endpoint\n");
+		} else if (qh->qh_state == QH_STATE_LINKED ||
+				qh->qh_state == QH_STATE_COMPLETING) {
+
+			/* The toggle value in the QH can't be updated
+			 * while the QH is active.  Unlink it now;
+			 * re-linking will call qh_refresh().
+			 */
+			if (eptype == USB_ENDPOINT_XFER_BULK)
+				start_unlink_async(fotg210, qh);
+			else
+				start_unlink_intr(fotg210, qh);
+		}
+	}
+	spin_unlock_irqrestore(&fotg210->lock, flags);
+}
+
+static int fotg210_get_frame(struct usb_hcd *hcd)
+{
+	struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
+
+	return (fotg210_read_frame_index(fotg210) >> 3) %
+		fotg210->periodic_size;
+}
+
+/* The EHCI in ChipIdea HDRC cannot be a separate module or device,
+ * because its registers (and irq) are shared between host/gadget/otg
+ * functions  and in order to facilitate role switching we cannot
+ * give the fotg210 driver exclusive access to those.
+ */
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+
+static const struct hc_driver fotg210_fotg210_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "Faraday USB2.0 Host Controller",
+	.hcd_priv_size		= sizeof(struct fotg210_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= fotg210_irq,
+	.flags			= HCD_MEMORY | HCD_DMA | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset			= hcd_fotg210_init,
+	.start			= fotg210_run,
+	.stop			= fotg210_stop,
+	.shutdown		= fotg210_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= fotg210_urb_enqueue,
+	.urb_dequeue		= fotg210_urb_dequeue,
+	.endpoint_disable	= fotg210_endpoint_disable,
+	.endpoint_reset		= fotg210_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= fotg210_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= fotg210_hub_status_data,
+	.hub_control		= fotg210_hub_control,
+	.bus_suspend		= fotg210_bus_suspend,
+	.bus_resume		= fotg210_bus_resume,
+
+	.relinquish_port	= fotg210_relinquish_port,
+	.port_handed_over	= fotg210_port_handed_over,
+
+	.clear_tt_buffer_complete = fotg210_clear_tt_buffer_complete,
+};
+
+static void fotg210_init(struct fotg210_hcd *fotg210)
+{
+	u32 value;
+
+	iowrite32(GMIR_MDEV_INT | GMIR_MOTG_INT | GMIR_INT_POLARITY,
+			&fotg210->regs->gmir);
+
+	value = ioread32(&fotg210->regs->otgcsr);
+	value &= ~OTGCSR_A_BUS_DROP;
+	value |= OTGCSR_A_BUS_REQ;
+	iowrite32(value, &fotg210->regs->otgcsr);
+}
+
+/*
+ * fotg210_hcd_probe - initialize faraday FOTG210 HCDs
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ */
+static int fotg210_hcd_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_hcd *hcd;
+	struct resource *res;
+	int irq;
+	int retval;
+	struct fotg210_hcd *fotg210;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	pdev->dev.power.power_state = PMSG_ON;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	hcd = usb_create_hcd(&fotg210_fotg210_hc_driver, dev,
+			dev_name(dev));
+	if (!hcd) {
+		dev_err(dev, "failed to create hcd\n");
+		retval = -ENOMEM;
+		goto fail_create_hcd;
+	}
+
+	hcd->has_tt = 1;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(hcd->regs)) {
+		retval = PTR_ERR(hcd->regs);
+		goto failed_put_hcd;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	fotg210 = hcd_to_fotg210(hcd);
+
+	fotg210->caps = hcd->regs;
+
+	/* It's OK not to supply this clock */
+	fotg210->pclk = clk_get(dev, "PCLK");
+	if (!IS_ERR(fotg210->pclk)) {
+		retval = clk_prepare_enable(fotg210->pclk);
+		if (retval) {
+			dev_err(dev, "failed to enable PCLK\n");
+			goto failed_put_hcd;
+		}
+	} else if (PTR_ERR(fotg210->pclk) == -EPROBE_DEFER) {
+		/*
+		 * Percolate deferrals, for anything else,
+		 * just live without the clocking.
+		 */
+		retval = PTR_ERR(fotg210->pclk);
+		goto failed_dis_clk;
+	}
+
+	retval = fotg210_setup(hcd);
+	if (retval)
+		goto failed_dis_clk;
+
+	fotg210_init(fotg210);
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval) {
+		dev_err(dev, "failed to add hcd with err %d\n", retval);
+		goto failed_dis_clk;
+	}
+	device_wakeup_enable(hcd->self.controller);
+	platform_set_drvdata(pdev, hcd);
+
+	return retval;
+
+failed_dis_clk:
+	if (!IS_ERR(fotg210->pclk)) {
+		clk_disable_unprepare(fotg210->pclk);
+		clk_put(fotg210->pclk);
+	}
+failed_put_hcd:
+	usb_put_hcd(hcd);
+fail_create_hcd:
+	dev_err(dev, "init %s fail, %d\n", dev_name(dev), retval);
+	return retval;
+}
+
+/*
+ * fotg210_hcd_remove - shutdown processing for EHCI HCDs
+ * @dev: USB Host Controller being removed
+ *
+ */
+static int fotg210_hcd_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
+
+	if (!IS_ERR(fotg210->pclk)) {
+		clk_disable_unprepare(fotg210->pclk);
+		clk_put(fotg210->pclk);
+	}
+
+	usb_remove_hcd(hcd);
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id fotg210_of_match[] = {
+	{ .compatible = "faraday,fotg210" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, fotg210_of_match);
+#endif
+
+static struct platform_driver fotg210_hcd_driver = {
+	.driver = {
+		.name   = "fotg210-hcd",
+		.of_match_table = of_match_ptr(fotg210_of_match),
+	},
+	.probe  = fotg210_hcd_probe,
+	.remove = fotg210_hcd_remove,
+};
+
+static int __init fotg210_hcd_init(void)
+{
+	int retval = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	set_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
+	if (test_bit(USB_UHCI_LOADED, &usb_hcds_loaded) ||
+			test_bit(USB_OHCI_LOADED, &usb_hcds_loaded))
+		pr_warn("Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after\n");
+
+	pr_debug("%s: block sizes: qh %zd qtd %zd itd %zd\n",
+			hcd_name, sizeof(struct fotg210_qh),
+			sizeof(struct fotg210_qtd),
+			sizeof(struct fotg210_itd));
+
+	fotg210_debug_root = debugfs_create_dir("fotg210", usb_debug_root);
+
+	retval = platform_driver_register(&fotg210_hcd_driver);
+	if (retval < 0)
+		goto clean;
+	return retval;
+
+clean:
+	debugfs_remove(fotg210_debug_root);
+	fotg210_debug_root = NULL;
+
+	clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
+	return retval;
+}
+module_init(fotg210_hcd_init);
+
+static void __exit fotg210_hcd_cleanup(void)
+{
+	platform_driver_unregister(&fotg210_hcd_driver);
+	debugfs_remove(fotg210_debug_root);
+	clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
+}
+module_exit(fotg210_hcd_cleanup);
diff --git a/drivers/usb/host/fotg210.h b/drivers/usb/host/fotg210.h
new file mode 100644
index 000000000..0781442b7
--- /dev/null
+++ b/drivers/usb/host/fotg210.h
@@ -0,0 +1,688 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_FOTG210_H
+#define __LINUX_FOTG210_H
+
+#include <linux/usb/ehci-dbgp.h>
+
+/* definitions used for the EHCI driver */
+
+/*
+ * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
+ * __leXX (normally) or __beXX (given FOTG210_BIG_ENDIAN_DESC), depending on
+ * the host controller implementation.
+ *
+ * To facilitate the strongest possible byte-order checking from "sparse"
+ * and so on, we use __leXX unless that's not practical.
+ */
+#define __hc32	__le32
+#define __hc16	__le16
+
+/* statistics can be kept for tuning/monitoring */
+struct fotg210_stats {
+	/* irq usage */
+	unsigned long		normal;
+	unsigned long		error;
+	unsigned long		iaa;
+	unsigned long		lost_iaa;
+
+	/* termination of urbs from core */
+	unsigned long		complete;
+	unsigned long		unlink;
+};
+
+/* fotg210_hcd->lock guards shared data against other CPUs:
+ *   fotg210_hcd:	async, unlink, periodic (and shadow), ...
+ *   usb_host_endpoint: hcpriv
+ *   fotg210_qh:	qh_next, qtd_list
+ *   fotg210_qtd:	qtd_list
+ *
+ * Also, hold this lock when talking to HC registers or
+ * when updating hw_* fields in shared qh/qtd/... structures.
+ */
+
+#define	FOTG210_MAX_ROOT_PORTS	1		/* see HCS_N_PORTS */
+
+/*
+ * fotg210_rh_state values of FOTG210_RH_RUNNING or above mean that the
+ * controller may be doing DMA.  Lower values mean there's no DMA.
+ */
+enum fotg210_rh_state {
+	FOTG210_RH_HALTED,
+	FOTG210_RH_SUSPENDED,
+	FOTG210_RH_RUNNING,
+	FOTG210_RH_STOPPING
+};
+
+/*
+ * Timer events, ordered by increasing delay length.
+ * Always update event_delays_ns[] and event_handlers[] (defined in
+ * ehci-timer.c) in parallel with this list.
+ */
+enum fotg210_hrtimer_event {
+	FOTG210_HRTIMER_POLL_ASS,	/* Poll for async schedule off */
+	FOTG210_HRTIMER_POLL_PSS,	/* Poll for periodic schedule off */
+	FOTG210_HRTIMER_POLL_DEAD,	/* Wait for dead controller to stop */
+	FOTG210_HRTIMER_UNLINK_INTR,	/* Wait for interrupt QH unlink */
+	FOTG210_HRTIMER_FREE_ITDS,	/* Wait for unused iTDs and siTDs */
+	FOTG210_HRTIMER_ASYNC_UNLINKS,	/* Unlink empty async QHs */
+	FOTG210_HRTIMER_IAA_WATCHDOG,	/* Handle lost IAA interrupts */
+	FOTG210_HRTIMER_DISABLE_PERIODIC, /* Wait to disable periodic sched */
+	FOTG210_HRTIMER_DISABLE_ASYNC,	/* Wait to disable async sched */
+	FOTG210_HRTIMER_IO_WATCHDOG,	/* Check for missing IRQs */
+	FOTG210_HRTIMER_NUM_EVENTS	/* Must come last */
+};
+#define FOTG210_HRTIMER_NO_EVENT	99
+
+struct fotg210_hcd {			/* one per controller */
+	/* timing support */
+	enum fotg210_hrtimer_event	next_hrtimer_event;
+	unsigned		enabled_hrtimer_events;
+	ktime_t			hr_timeouts[FOTG210_HRTIMER_NUM_EVENTS];
+	struct hrtimer		hrtimer;
+
+	int			PSS_poll_count;
+	int			ASS_poll_count;
+	int			died_poll_count;
+
+	/* glue to PCI and HCD framework */
+	struct fotg210_caps __iomem *caps;
+	struct fotg210_regs __iomem *regs;
+	struct ehci_dbg_port __iomem *debug;
+
+	__u32			hcs_params;	/* cached register copy */
+	spinlock_t		lock;
+	enum fotg210_rh_state	rh_state;
+
+	/* general schedule support */
+	bool			scanning:1;
+	bool			need_rescan:1;
+	bool			intr_unlinking:1;
+	bool			async_unlinking:1;
+	bool			shutdown:1;
+	struct fotg210_qh		*qh_scan_next;
+
+	/* async schedule support */
+	struct fotg210_qh		*async;
+	struct fotg210_qh		*dummy;		/* For AMD quirk use */
+	struct fotg210_qh		*async_unlink;
+	struct fotg210_qh		*async_unlink_last;
+	struct fotg210_qh		*async_iaa;
+	unsigned		async_unlink_cycle;
+	unsigned		async_count;	/* async activity count */
+
+	/* periodic schedule support */
+#define	DEFAULT_I_TDPS		1024		/* some HCs can do less */
+	unsigned		periodic_size;
+	__hc32			*periodic;	/* hw periodic table */
+	dma_addr_t		periodic_dma;
+	struct list_head	intr_qh_list;
+	unsigned		i_thresh;	/* uframes HC might cache */
+
+	union fotg210_shadow	*pshadow;	/* mirror hw periodic table */
+	struct fotg210_qh		*intr_unlink;
+	struct fotg210_qh		*intr_unlink_last;
+	unsigned		intr_unlink_cycle;
+	unsigned		now_frame;	/* frame from HC hardware */
+	unsigned		next_frame;	/* scan periodic, start here */
+	unsigned		intr_count;	/* intr activity count */
+	unsigned		isoc_count;	/* isoc activity count */
+	unsigned		periodic_count;	/* periodic activity count */
+	/* max periodic time per uframe */
+	unsigned		uframe_periodic_max;
+
+
+	/* list of itds completed while now_frame was still active */
+	struct list_head	cached_itd_list;
+	struct fotg210_itd	*last_itd_to_free;
+
+	/* per root hub port */
+	unsigned long		reset_done[FOTG210_MAX_ROOT_PORTS];
+
+	/* bit vectors (one bit per port)
+	 * which ports were already suspended at the start of a bus suspend
+	 */
+	unsigned long		bus_suspended;
+
+	/* which ports are edicated to the companion controller */
+	unsigned long		companion_ports;
+
+	/* which ports are owned by the companion during a bus suspend */
+	unsigned long		owned_ports;
+
+	/* which ports have the change-suspend feature turned on */
+	unsigned long		port_c_suspend;
+
+	/* which ports are suspended */
+	unsigned long		suspended_ports;
+
+	/* which ports have started to resume */
+	unsigned long		resuming_ports;
+
+	/* per-HC memory pools (could be per-bus, but ...) */
+	struct dma_pool		*qh_pool;	/* qh per active urb */
+	struct dma_pool		*qtd_pool;	/* one or more per qh */
+	struct dma_pool		*itd_pool;	/* itd per iso urb */
+
+	unsigned		random_frame;
+	unsigned long		next_statechange;
+	ktime_t			last_periodic_enable;
+	u32			command;
+
+	/* SILICON QUIRKS */
+	unsigned		need_io_watchdog:1;
+	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
+
+	u8			sbrn;		/* packed release number */
+
+	/* irq statistics */
+#ifdef FOTG210_STATS
+	struct fotg210_stats	stats;
+#	define INCR(x) ((x)++)
+#else
+#	define INCR(x) do {} while (0)
+#endif
+
+	/* silicon clock */
+	struct clk		*pclk;
+};
+
+/* convert between an HCD pointer and the corresponding FOTG210_HCD */
+static inline struct fotg210_hcd *hcd_to_fotg210(struct usb_hcd *hcd)
+{
+	return (struct fotg210_hcd *)(hcd->hcd_priv);
+}
+static inline struct usb_hcd *fotg210_to_hcd(struct fotg210_hcd *fotg210)
+{
+	return container_of((void *) fotg210, struct usb_hcd, hcd_priv);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
+
+/* Section 2.2 Host Controller Capability Registers */
+struct fotg210_caps {
+	/* these fields are specified as 8 and 16 bit registers,
+	 * but some hosts can't perform 8 or 16 bit PCI accesses.
+	 * some hosts treat caplength and hciversion as parts of a 32-bit
+	 * register, others treat them as two separate registers, this
+	 * affects the memory map for big endian controllers.
+	 */
+	u32		hc_capbase;
+#define HC_LENGTH(fotg210, p)	(0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
+				(fotg210_big_endian_capbase(fotg210) ? 24 : 0)))
+#define HC_VERSION(fotg210, p)	(0xffff&((p) >> /* bits 31:16 / offset 02h */ \
+				(fotg210_big_endian_capbase(fotg210) ? 0 : 16)))
+	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
+#define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
+
+	u32		hcc_params;	/* HCCPARAMS - offset 0x8 */
+#define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
+	u8		portroute[8];	 /* nibbles for routing - offset 0xC */
+};
+
+
+/* Section 2.3 Host Controller Operational Registers */
+struct fotg210_regs {
+
+	/* USBCMD: offset 0x00 */
+	u32		command;
+
+/* EHCI 1.1 addendum */
+/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
+#define CMD_PARK	(1<<11)		/* enable "park" on async qh */
+#define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
+#define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
+#define CMD_ASE		(1<<5)		/* async schedule enable */
+#define CMD_PSE		(1<<4)		/* periodic schedule enable */
+/* 3:2 is periodic frame list size */
+#define CMD_RESET	(1<<1)		/* reset HC not bus */
+#define CMD_RUN		(1<<0)		/* start/stop HC */
+
+	/* USBSTS: offset 0x04 */
+	u32		status;
+#define STS_ASS		(1<<15)		/* Async Schedule Status */
+#define STS_PSS		(1<<14)		/* Periodic Schedule Status */
+#define STS_RECL	(1<<13)		/* Reclamation */
+#define STS_HALT	(1<<12)		/* Not running (any reason) */
+/* some bits reserved */
+	/* these STS_* flags are also intr_enable bits (USBINTR) */
+#define STS_IAA		(1<<5)		/* Interrupted on async advance */
+#define STS_FATAL	(1<<4)		/* such as some PCI access errors */
+#define STS_FLR		(1<<3)		/* frame list rolled over */
+#define STS_PCD		(1<<2)		/* port change detect */
+#define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
+#define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
+
+	/* USBINTR: offset 0x08 */
+	u32		intr_enable;
+
+	/* FRINDEX: offset 0x0C */
+	u32		frame_index;	/* current microframe number */
+	/* CTRLDSSEGMENT: offset 0x10 */
+	u32		segment;	/* address bits 63:32 if needed */
+	/* PERIODICLISTBASE: offset 0x14 */
+	u32		frame_list;	/* points to periodic list */
+	/* ASYNCLISTADDR: offset 0x18 */
+	u32		async_next;	/* address of next async queue head */
+
+	u32	reserved1;
+	/* PORTSC: offset 0x20 */
+	u32	port_status;
+/* 31:23 reserved */
+#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))	/* USB 1.1 device */
+#define PORT_RESET	(1<<8)		/* reset port */
+#define PORT_SUSPEND	(1<<7)		/* suspend port */
+#define PORT_RESUME	(1<<6)		/* resume it */
+#define PORT_PEC	(1<<3)		/* port enable change */
+#define PORT_PE		(1<<2)		/* port enable */
+#define PORT_CSC	(1<<1)		/* connect status change */
+#define PORT_CONNECT	(1<<0)		/* device connected */
+#define PORT_RWC_BITS   (PORT_CSC | PORT_PEC)
+	u32     reserved2[19];
+
+	/* OTGCSR: offet 0x70 */
+	u32     otgcsr;
+#define OTGCSR_HOST_SPD_TYP     (3 << 22)
+#define OTGCSR_A_BUS_DROP	(1 << 5)
+#define OTGCSR_A_BUS_REQ	(1 << 4)
+
+	/* OTGISR: offset 0x74 */
+	u32     otgisr;
+#define OTGISR_OVC	(1 << 10)
+
+	u32     reserved3[15];
+
+	/* GMIR: offset 0xB4 */
+	u32     gmir;
+#define GMIR_INT_POLARITY	(1 << 3) /*Active High*/
+#define GMIR_MHC_INT		(1 << 2)
+#define GMIR_MOTG_INT		(1 << 1)
+#define GMIR_MDEV_INT	(1 << 0)
+};
+
+/*-------------------------------------------------------------------------*/
+
+#define	QTD_NEXT(fotg210, dma)	cpu_to_hc32(fotg210, (u32)dma)
+
+/*
+ * EHCI Specification 0.95 Section 3.5
+ * QTD: describe data transfer components (buffer, direction, ...)
+ * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
+ *
+ * These are associated only with "QH" (Queue Head) structures,
+ * used with control, bulk, and interrupt transfers.
+ */
+struct fotg210_qtd {
+	/* first part defined by EHCI spec */
+	__hc32			hw_next;	/* see EHCI 3.5.1 */
+	__hc32			hw_alt_next;    /* see EHCI 3.5.2 */
+	__hc32			hw_token;	/* see EHCI 3.5.3 */
+#define	QTD_TOGGLE	(1 << 31)	/* data toggle */
+#define	QTD_LENGTH(tok)	(((tok)>>16) & 0x7fff)
+#define	QTD_IOC		(1 << 15)	/* interrupt on complete */
+#define	QTD_CERR(tok)	(((tok)>>10) & 0x3)
+#define	QTD_PID(tok)	(((tok)>>8) & 0x3)
+#define	QTD_STS_ACTIVE	(1 << 7)	/* HC may execute this */
+#define	QTD_STS_HALT	(1 << 6)	/* halted on error */
+#define	QTD_STS_DBE	(1 << 5)	/* data buffer error (in HC) */
+#define	QTD_STS_BABBLE	(1 << 4)	/* device was babbling (qtd halted) */
+#define	QTD_STS_XACT	(1 << 3)	/* device gave illegal response */
+#define	QTD_STS_MMF	(1 << 2)	/* incomplete split transaction */
+#define	QTD_STS_STS	(1 << 1)	/* split transaction state */
+#define	QTD_STS_PING	(1 << 0)	/* issue PING? */
+
+#define ACTIVE_BIT(fotg210)	cpu_to_hc32(fotg210, QTD_STS_ACTIVE)
+#define HALT_BIT(fotg210)		cpu_to_hc32(fotg210, QTD_STS_HALT)
+#define STATUS_BIT(fotg210)	cpu_to_hc32(fotg210, QTD_STS_STS)
+
+	__hc32			hw_buf[5];	/* see EHCI 3.5.4 */
+	__hc32			hw_buf_hi[5];	/* Appendix B */
+
+	/* the rest is HCD-private */
+	dma_addr_t		qtd_dma;		/* qtd address */
+	struct list_head	qtd_list;		/* sw qtd list */
+	struct urb		*urb;			/* qtd's urb */
+	size_t			length;			/* length of buffer */
+} __aligned(32);
+
+/* mask NakCnt+T in qh->hw_alt_next */
+#define QTD_MASK(fotg210)	cpu_to_hc32(fotg210, ~0x1f)
+
+#define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)
+
+/*-------------------------------------------------------------------------*/
+
+/* type tag from {qh,itd,fstn}->hw_next */
+#define Q_NEXT_TYPE(fotg210, dma)	((dma) & cpu_to_hc32(fotg210, 3 << 1))
+
+/*
+ * Now the following defines are not converted using the
+ * cpu_to_le32() macro anymore, since we have to support
+ * "dynamic" switching between be and le support, so that the driver
+ * can be used on one system with SoC EHCI controller using big-endian
+ * descriptors as well as a normal little-endian PCI EHCI controller.
+ */
+/* values for that type tag */
+#define Q_TYPE_ITD	(0 << 1)
+#define Q_TYPE_QH	(1 << 1)
+#define Q_TYPE_SITD	(2 << 1)
+#define Q_TYPE_FSTN	(3 << 1)
+
+/* next async queue entry, or pointer to interrupt/periodic QH */
+#define QH_NEXT(fotg210, dma) \
+	(cpu_to_hc32(fotg210, (((u32)dma)&~0x01f)|Q_TYPE_QH))
+
+/* for periodic/async schedules and qtd lists, mark end of list */
+#define FOTG210_LIST_END(fotg210) \
+	cpu_to_hc32(fotg210, 1) /* "null pointer" to hw */
+
+/*
+ * Entries in periodic shadow table are pointers to one of four kinds
+ * of data structure.  That's dictated by the hardware; a type tag is
+ * encoded in the low bits of the hardware's periodic schedule.  Use
+ * Q_NEXT_TYPE to get the tag.
+ *
+ * For entries in the async schedule, the type tag always says "qh".
+ */
+union fotg210_shadow {
+	struct fotg210_qh	*qh;		/* Q_TYPE_QH */
+	struct fotg210_itd	*itd;		/* Q_TYPE_ITD */
+	struct fotg210_fstn	*fstn;		/* Q_TYPE_FSTN */
+	__hc32			*hw_next;	/* (all types) */
+	void			*ptr;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.95 Section 3.6
+ * QH: describes control/bulk/interrupt endpoints
+ * See Fig 3-7 "Queue Head Structure Layout".
+ *
+ * These appear in both the async and (for interrupt) periodic schedules.
+ */
+
+/* first part defined by EHCI spec */
+struct fotg210_qh_hw {
+	__hc32			hw_next;	/* see EHCI 3.6.1 */
+	__hc32			hw_info1;	/* see EHCI 3.6.2 */
+#define	QH_CONTROL_EP	(1 << 27)	/* FS/LS control endpoint */
+#define	QH_HEAD		(1 << 15)	/* Head of async reclamation list */
+#define	QH_TOGGLE_CTL	(1 << 14)	/* Data toggle control */
+#define	QH_HIGH_SPEED	(2 << 12)	/* Endpoint speed */
+#define	QH_LOW_SPEED	(1 << 12)
+#define	QH_FULL_SPEED	(0 << 12)
+#define	QH_INACTIVATE	(1 << 7)	/* Inactivate on next transaction */
+	__hc32			hw_info2;	/* see EHCI 3.6.2 */
+#define	QH_SMASK	0x000000ff
+#define	QH_CMASK	0x0000ff00
+#define	QH_HUBADDR	0x007f0000
+#define	QH_HUBPORT	0x3f800000
+#define	QH_MULT		0xc0000000
+	__hc32			hw_current;	/* qtd list - see EHCI 3.6.4 */
+
+	/* qtd overlay (hardware parts of a struct fotg210_qtd) */
+	__hc32			hw_qtd_next;
+	__hc32			hw_alt_next;
+	__hc32			hw_token;
+	__hc32			hw_buf[5];
+	__hc32			hw_buf_hi[5];
+} __aligned(32);
+
+struct fotg210_qh {
+	struct fotg210_qh_hw	*hw;		/* Must come first */
+	/* the rest is HCD-private */
+	dma_addr_t		qh_dma;		/* address of qh */
+	union fotg210_shadow	qh_next;	/* ptr to qh; or periodic */
+	struct list_head	qtd_list;	/* sw qtd list */
+	struct list_head	intr_node;	/* list of intr QHs */
+	struct fotg210_qtd	*dummy;
+	struct fotg210_qh	*unlink_next;	/* next on unlink list */
+
+	unsigned		unlink_cycle;
+
+	u8			needs_rescan;	/* Dequeue during giveback */
+	u8			qh_state;
+#define	QH_STATE_LINKED		1		/* HC sees this */
+#define	QH_STATE_UNLINK		2		/* HC may still see this */
+#define	QH_STATE_IDLE		3		/* HC doesn't see this */
+#define	QH_STATE_UNLINK_WAIT	4		/* LINKED and on unlink q */
+#define	QH_STATE_COMPLETING	5		/* don't touch token.HALT */
+
+	u8			xacterrs;	/* XactErr retry counter */
+#define	QH_XACTERR_MAX		32		/* XactErr retry limit */
+
+	/* periodic schedule info */
+	u8			usecs;		/* intr bandwidth */
+	u8			gap_uf;		/* uframes split/csplit gap */
+	u8			c_usecs;	/* ... split completion bw */
+	u16			tt_usecs;	/* tt downstream bandwidth */
+	unsigned short		period;		/* polling interval */
+	unsigned short		start;		/* where polling starts */
+#define NO_FRAME ((unsigned short)~0)			/* pick new start */
+
+	struct usb_device	*dev;		/* access to TT */
+	unsigned		is_out:1;	/* bulk or intr OUT */
+	unsigned		clearing_tt:1;	/* Clear-TT-Buf in progress */
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* description of one iso transaction (up to 3 KB data if highspeed) */
+struct fotg210_iso_packet {
+	/* These will be copied to iTD when scheduling */
+	u64			bufp;		/* itd->hw_bufp{,_hi}[pg] |= */
+	__hc32			transaction;	/* itd->hw_transaction[i] |= */
+	u8			cross;		/* buf crosses pages */
+	/* for full speed OUT splits */
+	u32			buf1;
+};
+
+/* temporary schedule data for packets from iso urbs (both speeds)
+ * each packet is one logical usb transaction to the device (not TT),
+ * beginning at stream->next_uframe
+ */
+struct fotg210_iso_sched {
+	struct list_head	td_list;
+	unsigned		span;
+	struct fotg210_iso_packet	packet[];
+};
+
+/*
+ * fotg210_iso_stream - groups all (s)itds for this endpoint.
+ * acts like a qh would, if EHCI had them for ISO.
+ */
+struct fotg210_iso_stream {
+	/* first field matches fotg210_hq, but is NULL */
+	struct fotg210_qh_hw	*hw;
+
+	u8			bEndpointAddress;
+	u8			highspeed;
+	struct list_head	td_list;	/* queued itds */
+	struct list_head	free_list;	/* list of unused itds */
+	struct usb_device	*udev;
+	struct usb_host_endpoint *ep;
+
+	/* output of (re)scheduling */
+	int			next_uframe;
+	__hc32			splits;
+
+	/* the rest is derived from the endpoint descriptor,
+	 * trusting urb->interval == f(epdesc->bInterval) and
+	 * including the extra info for hw_bufp[0..2]
+	 */
+	u8			usecs, c_usecs;
+	u16			interval;
+	u16			tt_usecs;
+	u16			maxp;
+	u16			raw_mask;
+	unsigned		bandwidth;
+
+	/* This is used to initialize iTD's hw_bufp fields */
+	__hc32			buf0;
+	__hc32			buf1;
+	__hc32			buf2;
+
+	/* this is used to initialize sITD's tt info */
+	__hc32			address;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.95 Section 3.3
+ * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
+ *
+ * Schedule records for high speed iso xfers
+ */
+struct fotg210_itd {
+	/* first part defined by EHCI spec */
+	__hc32			hw_next;	/* see EHCI 3.3.1 */
+	__hc32			hw_transaction[8]; /* see EHCI 3.3.2 */
+#define FOTG210_ISOC_ACTIVE	(1<<31)	/* activate transfer this slot */
+#define FOTG210_ISOC_BUF_ERR	(1<<30)	/* Data buffer error */
+#define FOTG210_ISOC_BABBLE	(1<<29)	/* babble detected */
+#define FOTG210_ISOC_XACTERR	(1<<28)	/* XactErr - transaction error */
+#define	FOTG210_ITD_LENGTH(tok)	(((tok)>>16) & 0x0fff)
+#define	FOTG210_ITD_IOC		(1 << 15)	/* interrupt on complete */
+
+#define ITD_ACTIVE(fotg210)	cpu_to_hc32(fotg210, FOTG210_ISOC_ACTIVE)
+
+	__hc32			hw_bufp[7];	/* see EHCI 3.3.3 */
+	__hc32			hw_bufp_hi[7];	/* Appendix B */
+
+	/* the rest is HCD-private */
+	dma_addr_t		itd_dma;	/* for this itd */
+	union fotg210_shadow	itd_next;	/* ptr to periodic q entry */
+
+	struct urb		*urb;
+	struct fotg210_iso_stream	*stream;	/* endpoint's queue */
+	struct list_head	itd_list;	/* list of stream's itds */
+
+	/* any/all hw_transactions here may be used by that urb */
+	unsigned		frame;		/* where scheduled */
+	unsigned		pg;
+	unsigned		index[8];	/* in urb->iso_frame_desc */
+} __aligned(32);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.96 Section 3.7
+ * Periodic Frame Span Traversal Node (FSTN)
+ *
+ * Manages split interrupt transactions (using TT) that span frame boundaries
+ * into uframes 0/1; see 4.12.2.2.  In those uframes, a "save place" FSTN
+ * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
+ * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
+ */
+struct fotg210_fstn {
+	__hc32			hw_next;	/* any periodic q entry */
+	__hc32			hw_prev;	/* qh or FOTG210_LIST_END */
+
+	/* the rest is HCD-private */
+	dma_addr_t		fstn_dma;
+	union fotg210_shadow	fstn_next;	/* ptr to periodic q entry */
+} __aligned(32);
+
+/*-------------------------------------------------------------------------*/
+
+/* Prepare the PORTSC wakeup flags during controller suspend/resume */
+
+#define fotg210_prepare_ports_for_controller_suspend(fotg210, do_wakeup) \
+		fotg210_adjust_port_wakeup_flags(fotg210, true, do_wakeup)
+
+#define fotg210_prepare_ports_for_controller_resume(fotg210)		\
+		fotg210_adjust_port_wakeup_flags(fotg210, false, false)
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Some EHCI controllers have a Transaction Translator built into the
+ * root hub. This is a non-standard feature.  Each controller will need
+ * to add code to the following inline functions, and call them as
+ * needed (mostly in root hub code).
+ */
+
+static inline unsigned int
+fotg210_get_speed(struct fotg210_hcd *fotg210, unsigned int portsc)
+{
+	return (readl(&fotg210->regs->otgcsr)
+		& OTGCSR_HOST_SPD_TYP) >> 22;
+}
+
+/* Returns the speed of a device attached to a port on the root hub. */
+static inline unsigned int
+fotg210_port_speed(struct fotg210_hcd *fotg210, unsigned int portsc)
+{
+	switch (fotg210_get_speed(fotg210, portsc)) {
+	case 0:
+		return 0;
+	case 1:
+		return USB_PORT_STAT_LOW_SPEED;
+	case 2:
+	default:
+		return USB_PORT_STAT_HIGH_SPEED;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define	fotg210_has_fsl_portno_bug(e)		(0)
+
+/*
+ * While most USB host controllers implement their registers in
+ * little-endian format, a minority (celleb companion chip) implement
+ * them in big endian format.
+ *
+ * This attempts to support either format at compile time without a
+ * runtime penalty, or both formats with the additional overhead
+ * of checking a flag bit.
+ *
+ */
+
+#define fotg210_big_endian_mmio(e)	0
+#define fotg210_big_endian_capbase(e)	0
+
+static inline unsigned int fotg210_readl(const struct fotg210_hcd *fotg210,
+		__u32 __iomem *regs)
+{
+	return readl(regs);
+}
+
+static inline void fotg210_writel(const struct fotg210_hcd *fotg210,
+		const unsigned int val, __u32 __iomem *regs)
+{
+	writel(val, regs);
+}
+
+/* cpu to fotg210 */
+static inline __hc32 cpu_to_hc32(const struct fotg210_hcd *fotg210, const u32 x)
+{
+	return cpu_to_le32(x);
+}
+
+/* fotg210 to cpu */
+static inline u32 hc32_to_cpu(const struct fotg210_hcd *fotg210, const __hc32 x)
+{
+	return le32_to_cpu(x);
+}
+
+static inline u32 hc32_to_cpup(const struct fotg210_hcd *fotg210,
+			       const __hc32 *x)
+{
+	return le32_to_cpup(x);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline unsigned fotg210_read_frame_index(struct fotg210_hcd *fotg210)
+{
+	return fotg210_readl(fotg210, &fotg210->regs->frame_index);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#endif /* __LINUX_FOTG210_H */
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
new file mode 100644
index 000000000..46c6a152b
--- /dev/null
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Setup platform devices needed by the Freescale multi-port host
+ * and/or dual-role USB controller modules based on the description
+ * in flat device tree.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+
+struct fsl_usb2_dev_data {
+	char *dr_mode;		/* controller mode */
+	char *drivers[3];	/* drivers to instantiate for this mode */
+	enum fsl_usb2_operating_modes op_mode;	/* operating mode */
+};
+
+static struct fsl_usb2_dev_data dr_mode_data[] = {
+	{
+		.dr_mode = "host",
+		.drivers = { "fsl-ehci", NULL, NULL, },
+		.op_mode = FSL_USB2_DR_HOST,
+	},
+	{
+		.dr_mode = "otg",
+		.drivers = { "fsl-usb2-otg", "fsl-ehci", "fsl-usb2-udc", },
+		.op_mode = FSL_USB2_DR_OTG,
+	},
+	{
+		.dr_mode = "peripheral",
+		.drivers = { "fsl-usb2-udc", NULL, NULL, },
+		.op_mode = FSL_USB2_DR_DEVICE,
+	},
+};
+
+static struct fsl_usb2_dev_data *get_dr_mode_data(struct device_node *np)
+{
+	const unsigned char *prop;
+	int i;
+
+	prop = of_get_property(np, "dr_mode", NULL);
+	if (prop) {
+		for (i = 0; i < ARRAY_SIZE(dr_mode_data); i++) {
+			if (!strcmp(prop, dr_mode_data[i].dr_mode))
+				return &dr_mode_data[i];
+		}
+	}
+	pr_warn("%pOF: Invalid 'dr_mode' property, fallback to host mode\n",
+		np);
+	return &dr_mode_data[0]; /* mode not specified, use host */
+}
+
+static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
+{
+	if (!phy_type)
+		return FSL_USB2_PHY_NONE;
+	if (!strcasecmp(phy_type, "ulpi"))
+		return FSL_USB2_PHY_ULPI;
+	if (!strcasecmp(phy_type, "utmi"))
+		return FSL_USB2_PHY_UTMI;
+	if (!strcasecmp(phy_type, "utmi_wide"))
+		return FSL_USB2_PHY_UTMI_WIDE;
+	if (!strcasecmp(phy_type, "utmi_dual"))
+		return FSL_USB2_PHY_UTMI_DUAL;
+	if (!strcasecmp(phy_type, "serial"))
+		return FSL_USB2_PHY_SERIAL;
+
+	return FSL_USB2_PHY_NONE;
+}
+
+static struct platform_device *fsl_usb2_device_register(
+					struct platform_device *ofdev,
+					struct fsl_usb2_platform_data *pdata,
+					const char *name, int id)
+{
+	struct platform_device *pdev;
+	const struct resource *res = ofdev->resource;
+	unsigned int num = ofdev->num_resources;
+	int retval;
+
+	pdev = platform_device_alloc(name, id);
+	if (!pdev) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	pdev->dev.parent = &ofdev->dev;
+
+	pdev->dev.coherent_dma_mask = ofdev->dev.coherent_dma_mask;
+
+	if (!pdev->dev.dma_mask) {
+		pdev->dev.dma_mask = &ofdev->dev.coherent_dma_mask;
+	} else {
+		retval = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+		if (retval)
+			goto error;
+	}
+
+	retval = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+	if (retval)
+		goto error;
+
+	if (num) {
+		retval = platform_device_add_resources(pdev, res, num);
+		if (retval)
+			goto error;
+	}
+
+	device_set_of_node_from_dev(&pdev->dev, &ofdev->dev);
+
+	retval = platform_device_add(pdev);
+	if (retval)
+		goto error;
+
+	return pdev;
+
+error:
+	platform_device_put(pdev);
+	return ERR_PTR(retval);
+}
+
+static const struct of_device_id fsl_usb2_mph_dr_of_match[];
+
+static enum fsl_usb2_controller_ver usb_get_ver_info(struct device_node *np)
+{
+	enum fsl_usb2_controller_ver ver = FSL_USB_VER_NONE;
+
+	/*
+	 * returns 1 for usb controller version 1.6
+	 * returns 2 for usb controller version 2.2
+	 * returns 3 for usb controller version 2.4
+	 * returns 4 for usb controller version 2.5
+	 * returns 0 otherwise
+	 */
+	if (of_device_is_compatible(np, "fsl-usb2-dr")) {
+		if (of_device_is_compatible(np, "fsl-usb2-dr-v1.6"))
+			ver = FSL_USB_VER_1_6;
+		else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.2"))
+			ver = FSL_USB_VER_2_2;
+		else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.4"))
+			ver = FSL_USB_VER_2_4;
+		else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.5"))
+			ver = FSL_USB_VER_2_5;
+		else /* for previous controller versions */
+			ver = FSL_USB_VER_OLD;
+
+		if (ver > FSL_USB_VER_NONE)
+			return ver;
+	}
+
+	if (of_device_is_compatible(np, "fsl,mpc5121-usb2-dr"))
+		return FSL_USB_VER_OLD;
+
+	if (of_device_is_compatible(np, "fsl-usb2-mph")) {
+		if (of_device_is_compatible(np, "fsl-usb2-mph-v1.6"))
+			ver = FSL_USB_VER_1_6;
+		else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.2"))
+			ver = FSL_USB_VER_2_2;
+		else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.4"))
+			ver = FSL_USB_VER_2_4;
+		else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.5"))
+			ver = FSL_USB_VER_2_5;
+		else /* for previous controller versions */
+			ver = FSL_USB_VER_OLD;
+	}
+
+	return ver;
+}
+
+static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
+{
+	struct device_node *np = ofdev->dev.of_node;
+	struct platform_device *usb_dev;
+	struct fsl_usb2_platform_data data, *pdata;
+	struct fsl_usb2_dev_data *dev_data;
+	const struct of_device_id *match;
+	const unsigned char *prop;
+	static unsigned int idx;
+	int i;
+
+	if (!of_device_is_available(np))
+		return -ENODEV;
+
+	match = of_match_device(fsl_usb2_mph_dr_of_match, &ofdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	pdata = &data;
+	if (match->data)
+		memcpy(pdata, match->data, sizeof(data));
+	else
+		memset(pdata, 0, sizeof(data));
+
+	dev_data = get_dr_mode_data(np);
+
+	if (of_device_is_compatible(np, "fsl-usb2-mph")) {
+		if (of_get_property(np, "port0", NULL))
+			pdata->port_enables |= FSL_USB2_PORT0_ENABLED;
+
+		if (of_get_property(np, "port1", NULL))
+			pdata->port_enables |= FSL_USB2_PORT1_ENABLED;
+
+		pdata->operating_mode = FSL_USB2_MPH_HOST;
+	} else {
+		if (of_get_property(np, "fsl,invert-drvvbus", NULL))
+			pdata->invert_drvvbus = 1;
+
+		if (of_get_property(np, "fsl,invert-pwr-fault", NULL))
+			pdata->invert_pwr_fault = 1;
+
+		/* setup mode selected in the device tree */
+		pdata->operating_mode = dev_data->op_mode;
+	}
+
+	prop = of_get_property(np, "phy_type", NULL);
+	pdata->phy_mode = determine_usb_phy(prop);
+	pdata->controller_ver = usb_get_ver_info(np);
+
+	/* Activate Erratum by reading property in device tree */
+	pdata->has_fsl_erratum_a007792 =
+		of_property_read_bool(np, "fsl,usb-erratum-a007792");
+	pdata->has_fsl_erratum_a005275 =
+		of_property_read_bool(np, "fsl,usb-erratum-a005275");
+	pdata->has_fsl_erratum_a005697 =
+		of_property_read_bool(np, "fsl,usb_erratum-a005697");
+	pdata->has_fsl_erratum_a006918 =
+		of_property_read_bool(np, "fsl,usb_erratum-a006918");
+	pdata->has_fsl_erratum_14 =
+		of_property_read_bool(np, "fsl,usb_erratum-14");
+
+	/*
+	 * Determine whether phy_clk_valid needs to be checked
+	 * by reading property in device tree
+	 */
+	pdata->check_phy_clk_valid =
+		of_property_read_bool(np, "phy-clk-valid");
+
+	if (pdata->have_sysif_regs) {
+		if (pdata->controller_ver == FSL_USB_VER_NONE) {
+			dev_warn(&ofdev->dev, "Could not get controller version\n");
+			return -ENODEV;
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(dev_data->drivers); i++) {
+		if (!dev_data->drivers[i])
+			continue;
+		usb_dev = fsl_usb2_device_register(ofdev, pdata,
+					dev_data->drivers[i], idx);
+		if (IS_ERR(usb_dev)) {
+			dev_err(&ofdev->dev, "Can't register usb device\n");
+			return PTR_ERR(usb_dev);
+		}
+	}
+	idx++;
+	return 0;
+}
+
+static int __unregister_subdev(struct device *dev, void *d)
+{
+	platform_device_unregister(to_platform_device(dev));
+	return 0;
+}
+
+static int fsl_usb2_mph_dr_of_remove(struct platform_device *ofdev)
+{
+	device_for_each_child(&ofdev->dev, NULL, __unregister_subdev);
+	return 0;
+}
+
+#ifdef CONFIG_PPC_MPC512x
+
+#define USBGENCTRL		0x200		/* NOTE: big endian */
+#define GC_WU_INT_CLR		(1 << 5)	/* Wakeup int clear */
+#define GC_ULPI_SEL		(1 << 4)	/* ULPI i/f select (usb0 only)*/
+#define GC_PPP			(1 << 3)	/* Inv. Port Power Polarity */
+#define GC_PFP			(1 << 2)	/* Inv. Power Fault Polarity */
+#define GC_WU_ULPI_EN		(1 << 1)	/* Wakeup on ULPI event */
+#define GC_WU_IE		(1 << 1)	/* Wakeup interrupt enable */
+
+#define ISIPHYCTRL		0x204		/* NOTE: big endian */
+#define PHYCTRL_PHYE		(1 << 4)	/* On-chip UTMI PHY enable */
+#define PHYCTRL_BSENH		(1 << 3)	/* Bit Stuff Enable High */
+#define PHYCTRL_BSEN		(1 << 2)	/* Bit Stuff Enable */
+#define PHYCTRL_LSFE		(1 << 1)	/* Line State Filter Enable */
+#define PHYCTRL_PXE		(1 << 0)	/* PHY oscillator enable */
+
+int fsl_usb2_mpc5121_init(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct clk *clk;
+	int err;
+
+	clk = devm_clk_get(pdev->dev.parent, "ipg");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clk\n");
+		return PTR_ERR(clk);
+	}
+	err = clk_prepare_enable(clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable clk\n");
+		return err;
+	}
+	pdata->clk = clk;
+
+	if (pdata->phy_mode == FSL_USB2_PHY_UTMI_WIDE) {
+		u32 reg = 0;
+
+		if (pdata->invert_drvvbus)
+			reg |= GC_PPP;
+
+		if (pdata->invert_pwr_fault)
+			reg |= GC_PFP;
+
+		out_be32(pdata->regs + ISIPHYCTRL, PHYCTRL_PHYE | PHYCTRL_PXE);
+		out_be32(pdata->regs + USBGENCTRL, reg);
+	}
+	return 0;
+}
+
+static void fsl_usb2_mpc5121_exit(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+	pdata->regs = NULL;
+
+	if (pdata->clk)
+		clk_disable_unprepare(pdata->clk);
+}
+
+static struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
+	.big_endian_desc = 1,
+	.big_endian_mmio = 1,
+	.es = 1,
+	.have_sysif_regs = 0,
+	.le_setup_buf = 1,
+	.init = fsl_usb2_mpc5121_init,
+	.exit = fsl_usb2_mpc5121_exit,
+};
+#endif /* CONFIG_PPC_MPC512x */
+
+static struct fsl_usb2_platform_data fsl_usb2_mpc8xxx_pd = {
+	.have_sysif_regs = 1,
+};
+
+static const struct of_device_id fsl_usb2_mph_dr_of_match[] = {
+	{ .compatible = "fsl-usb2-mph", .data = &fsl_usb2_mpc8xxx_pd, },
+	{ .compatible = "fsl-usb2-dr", .data = &fsl_usb2_mpc8xxx_pd, },
+#ifdef CONFIG_PPC_MPC512x
+	{ .compatible = "fsl,mpc5121-usb2-dr", .data = &fsl_usb2_mpc5121_pd, },
+#endif
+	{},
+};
+MODULE_DEVICE_TABLE(of, fsl_usb2_mph_dr_of_match);
+
+static struct platform_driver fsl_usb2_mph_dr_driver = {
+	.driver = {
+		.name = "fsl-usb2-mph-dr",
+		.of_match_table = fsl_usb2_mph_dr_of_match,
+	},
+	.probe	= fsl_usb2_mph_dr_of_probe,
+	.remove	= fsl_usb2_mph_dr_of_remove,
+};
+
+module_platform_driver(fsl_usb2_mph_dr_driver);
+
+MODULE_DESCRIPTION("FSL MPH DR OF devices driver");
+MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
new file mode 100644
index 000000000..49ae01487
--- /dev/null
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -0,0 +1,1696 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ISP116x HCD (Host Controller Driver) for USB.
+ *
+ * Derived from the SL811 HCD, rewritten for ISP116x.
+ * Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee>
+ *
+ * Portions:
+ * Copyright (C) 2004 Psion Teklogix (for NetBook PRO)
+ * Copyright (C) 2004 David Brownell
+ *
+ * Periodic scheduling is based on Roman's OHCI code
+ * Copyright (C) 1999 Roman Weissgaerber
+ *
+ */
+
+/*
+ * The driver basically works. A number of people have used it with a range
+ * of devices.
+ *
+ * The driver passes all usbtests 1-14.
+ *
+ * Suspending/resuming of root hub via sysfs works. Remote wakeup works too.
+ * And suspending/resuming of platform device works too. Suspend/resume
+ * via HCD operations vector is not implemented.
+ *
+ * Iso transfer support is not implemented. Adding this would include
+ * implementing recovery from the failure to service the processed ITL
+ * fifo ram in time, which will involve chip reset.
+ *
+ * TODO:
+ + More testing of suspend/resume.
+*/
+
+/*
+  ISP116x chips require certain delays between accesses to its
+  registers. The following timing options exist.
+
+  1. Configure your memory controller (the best)
+  2. Implement platform-specific delay function possibly
+  combined with configuring the memory controller; see
+  include/linux/usb-isp116x.h for more info. Some broken
+  memory controllers line LH7A400 SMC need this. Also,
+  uncomment for that to work the following
+  USE_PLATFORM_DELAY macro.
+  3. Use ndelay (easiest, poorest). For that, uncomment
+  the following USE_NDELAY macro.
+*/
+#define USE_PLATFORM_DELAY
+//#define USE_NDELAY
+
+//#define DEBUG
+//#define VERBOSE
+/* Transfer descriptors. See dump_ptd() for printout format  */
+//#define PTD_TRACE
+/* enqueuing/finishing log of urbs */
+//#define URB_TRACE
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/isp116x.h>
+#include <linux/usb/hcd.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+
+#include "isp116x.h"
+
+#define DRIVER_VERSION	"03 Nov 2005"
+#define DRIVER_DESC	"ISP116x USB Host Controller Driver"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static const char hcd_name[] = "isp116x-hcd";
+
+/*-----------------------------------------------------------------*/
+
+/*
+  Write len bytes to fifo, pad till 32-bit boundary
+ */
+static void write_ptddata_to_fifo(struct isp116x *isp116x, void *buf, int len)
+{
+	u8 *dp = (u8 *) buf;
+	u16 *dp2 = (u16 *) buf;
+	u16 w;
+	int quot = len % 4;
+
+	/* buffer is already in 'usb data order', which is LE. */
+	/* When reading buffer as u16, we have to take care byte order */
+	/* doesn't get mixed up */
+
+	if ((unsigned long)dp2 & 1) {
+		/* not aligned */
+		for (; len > 1; len -= 2) {
+			w = *dp++;
+			w |= *dp++ << 8;
+			isp116x_raw_write_data16(isp116x, w);
+		}
+		if (len)
+			isp116x_write_data16(isp116x, (u16) * dp);
+	} else {
+		/* aligned */
+		for (; len > 1; len -= 2) {
+			/* Keep byte order ! */
+			isp116x_raw_write_data16(isp116x, cpu_to_le16(*dp2++));
+		}
+
+		if (len)
+			isp116x_write_data16(isp116x, 0xff & *((u8 *) dp2));
+	}
+	if (quot == 1 || quot == 2)
+		isp116x_raw_write_data16(isp116x, 0);
+}
+
+/*
+  Read len bytes from fifo and then read till 32-bit boundary.
+ */
+static void read_ptddata_from_fifo(struct isp116x *isp116x, void *buf, int len)
+{
+	u8 *dp = (u8 *) buf;
+	u16 *dp2 = (u16 *) buf;
+	u16 w;
+	int quot = len % 4;
+
+	/* buffer is already in 'usb data order', which is LE. */
+	/* When reading buffer as u16, we have to take care byte order */
+	/* doesn't get mixed up */
+
+	if ((unsigned long)dp2 & 1) {
+		/* not aligned */
+		for (; len > 1; len -= 2) {
+			w = isp116x_raw_read_data16(isp116x);
+			*dp++ = w & 0xff;
+			*dp++ = (w >> 8) & 0xff;
+		}
+
+		if (len)
+			*dp = 0xff & isp116x_read_data16(isp116x);
+	} else {
+		/* aligned */
+		for (; len > 1; len -= 2) {
+			/* Keep byte order! */
+			*dp2++ = le16_to_cpu(isp116x_raw_read_data16(isp116x));
+		}
+
+		if (len)
+			*(u8 *) dp2 = 0xff & isp116x_read_data16(isp116x);
+	}
+	if (quot == 1 || quot == 2)
+		isp116x_raw_read_data16(isp116x);
+}
+
+/*
+  Write ptd's and data for scheduled transfers into
+  the fifo ram. Fifo must be empty and ready.
+*/
+static void pack_fifo(struct isp116x *isp116x)
+{
+	struct isp116x_ep *ep;
+	struct ptd *ptd;
+	int buflen = isp116x->atl_last_dir == PTD_DIR_IN
+	    ? isp116x->atl_bufshrt : isp116x->atl_buflen;
+
+	isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT);
+	isp116x_write_reg16(isp116x, HCXFERCTR, buflen);
+	isp116x_write_addr(isp116x, HCATLPORT | ISP116x_WRITE_OFFSET);
+	for (ep = isp116x->atl_active; ep; ep = ep->active) {
+		ptd = &ep->ptd;
+		dump_ptd(ptd);
+		dump_ptd_out_data(ptd, ep->data);
+		isp116x_write_data16(isp116x, ptd->count);
+		isp116x_write_data16(isp116x, ptd->mps);
+		isp116x_write_data16(isp116x, ptd->len);
+		isp116x_write_data16(isp116x, ptd->faddr);
+		buflen -= sizeof(struct ptd);
+		/* Skip writing data for last IN PTD */
+		if (ep->active || (isp116x->atl_last_dir != PTD_DIR_IN)) {
+			write_ptddata_to_fifo(isp116x, ep->data, ep->length);
+			buflen -= ALIGN(ep->length, 4);
+		}
+	}
+	BUG_ON(buflen);
+}
+
+/*
+  Read the processed ptd's and data from fifo ram back to
+  URBs' buffers. Fifo must be full and done
+*/
+static void unpack_fifo(struct isp116x *isp116x)
+{
+	struct isp116x_ep *ep;
+	struct ptd *ptd;
+	int buflen = isp116x->atl_last_dir == PTD_DIR_IN
+	    ? isp116x->atl_buflen : isp116x->atl_bufshrt;
+
+	isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT);
+	isp116x_write_reg16(isp116x, HCXFERCTR, buflen);
+	isp116x_write_addr(isp116x, HCATLPORT);
+	for (ep = isp116x->atl_active; ep; ep = ep->active) {
+		ptd = &ep->ptd;
+		ptd->count = isp116x_read_data16(isp116x);
+		ptd->mps = isp116x_read_data16(isp116x);
+		ptd->len = isp116x_read_data16(isp116x);
+		ptd->faddr = isp116x_read_data16(isp116x);
+		buflen -= sizeof(struct ptd);
+		/* Skip reading data for last Setup or Out PTD */
+		if (ep->active || (isp116x->atl_last_dir == PTD_DIR_IN)) {
+			read_ptddata_from_fifo(isp116x, ep->data, ep->length);
+			buflen -= ALIGN(ep->length, 4);
+		}
+		dump_ptd(ptd);
+		dump_ptd_in_data(ptd, ep->data);
+	}
+	BUG_ON(buflen);
+}
+
+/*---------------------------------------------------------------*/
+
+/*
+  Set up PTD's.
+*/
+static void preproc_atl_queue(struct isp116x *isp116x)
+{
+	struct isp116x_ep *ep;
+	struct urb *urb;
+	struct ptd *ptd;
+	u16 len;
+
+	for (ep = isp116x->atl_active; ep; ep = ep->active) {
+		u16 toggle = 0, dir = PTD_DIR_SETUP;
+
+		BUG_ON(list_empty(&ep->hep->urb_list));
+		urb = container_of(ep->hep->urb_list.next,
+				   struct urb, urb_list);
+		ptd = &ep->ptd;
+		len = ep->length;
+		ep->data = (unsigned char *)urb->transfer_buffer
+		    + urb->actual_length;
+
+		switch (ep->nextpid) {
+		case USB_PID_IN:
+			toggle = usb_gettoggle(urb->dev, ep->epnum, 0);
+			dir = PTD_DIR_IN;
+			break;
+		case USB_PID_OUT:
+			toggle = usb_gettoggle(urb->dev, ep->epnum, 1);
+			dir = PTD_DIR_OUT;
+			break;
+		case USB_PID_SETUP:
+			len = sizeof(struct usb_ctrlrequest);
+			ep->data = urb->setup_packet;
+			break;
+		case USB_PID_ACK:
+			toggle = 1;
+			len = 0;
+			dir = (urb->transfer_buffer_length
+			       && usb_pipein(urb->pipe))
+			    ? PTD_DIR_OUT : PTD_DIR_IN;
+			break;
+		default:
+			ERR("%s %d: ep->nextpid %d\n", __func__, __LINE__,
+			    ep->nextpid);
+			BUG();
+		}
+
+		ptd->count = PTD_CC_MSK | PTD_ACTIVE_MSK | PTD_TOGGLE(toggle);
+		ptd->mps = PTD_MPS(ep->maxpacket)
+		    | PTD_SPD(urb->dev->speed == USB_SPEED_LOW)
+		    | PTD_EP(ep->epnum);
+		ptd->len = PTD_LEN(len) | PTD_DIR(dir);
+		ptd->faddr = PTD_FA(usb_pipedevice(urb->pipe));
+		if (!ep->active) {
+			ptd->mps |= PTD_LAST_MSK;
+			isp116x->atl_last_dir = dir;
+		}
+		isp116x->atl_bufshrt = sizeof(struct ptd) + isp116x->atl_buflen;
+		isp116x->atl_buflen = isp116x->atl_bufshrt + ALIGN(len, 4);
+	}
+}
+
+/*
+  Take done or failed requests out of schedule. Give back
+  processed urbs.
+*/
+static void finish_request(struct isp116x *isp116x, struct isp116x_ep *ep,
+			   struct urb *urb, int status)
+__releases(isp116x->lock) __acquires(isp116x->lock)
+{
+	unsigned i;
+
+	ep->error_count = 0;
+
+	if (usb_pipecontrol(urb->pipe))
+		ep->nextpid = USB_PID_SETUP;
+
+	urb_dbg(urb, "Finish");
+
+	usb_hcd_unlink_urb_from_ep(isp116x_to_hcd(isp116x), urb);
+	spin_unlock(&isp116x->lock);
+	usb_hcd_giveback_urb(isp116x_to_hcd(isp116x), urb, status);
+	spin_lock(&isp116x->lock);
+
+	/* take idle endpoints out of the schedule */
+	if (!list_empty(&ep->hep->urb_list))
+		return;
+
+	/* async deschedule */
+	if (!list_empty(&ep->schedule)) {
+		list_del_init(&ep->schedule);
+		return;
+	}
+
+	/* periodic deschedule */
+	DBG("deschedule qh%d/%p branch %d\n", ep->period, ep, ep->branch);
+	for (i = ep->branch; i < PERIODIC_SIZE; i += ep->period) {
+		struct isp116x_ep *temp;
+		struct isp116x_ep **prev = &isp116x->periodic[i];
+
+		while (*prev && ((temp = *prev) != ep))
+			prev = &temp->next;
+		if (*prev)
+			*prev = ep->next;
+		isp116x->load[i] -= ep->load;
+	}
+	ep->branch = PERIODIC_SIZE;
+	isp116x_to_hcd(isp116x)->self.bandwidth_allocated -=
+	    ep->load / ep->period;
+
+	/* switch irq type? */
+	if (!--isp116x->periodic_count) {
+		isp116x->irqenb &= ~HCuPINT_SOF;
+		isp116x->irqenb |= HCuPINT_ATL;
+	}
+}
+
+/*
+  Analyze transfer results, handle partial transfers and errors
+*/
+static void postproc_atl_queue(struct isp116x *isp116x)
+{
+	struct isp116x_ep *ep;
+	struct urb *urb;
+	struct usb_device *udev;
+	struct ptd *ptd;
+	int short_not_ok;
+	int status;
+	u8 cc;
+
+	for (ep = isp116x->atl_active; ep; ep = ep->active) {
+		BUG_ON(list_empty(&ep->hep->urb_list));
+		urb =
+		    container_of(ep->hep->urb_list.next, struct urb, urb_list);
+		udev = urb->dev;
+		ptd = &ep->ptd;
+		cc = PTD_GET_CC(ptd);
+		short_not_ok = 1;
+		status = -EINPROGRESS;
+
+		/* Data underrun is special. For allowed underrun
+		   we clear the error and continue as normal. For
+		   forbidden underrun we finish the DATA stage
+		   immediately while for control transfer,
+		   we do a STATUS stage. */
+		if (cc == TD_DATAUNDERRUN) {
+			if (!(urb->transfer_flags & URB_SHORT_NOT_OK) ||
+					usb_pipecontrol(urb->pipe)) {
+				DBG("Allowed or control data underrun\n");
+				cc = TD_CC_NOERROR;
+				short_not_ok = 0;
+			} else {
+				ep->error_count = 1;
+				usb_settoggle(udev, ep->epnum,
+					      ep->nextpid == USB_PID_OUT,
+					      PTD_GET_TOGGLE(ptd));
+				urb->actual_length += PTD_GET_COUNT(ptd);
+				status = cc_to_error[TD_DATAUNDERRUN];
+				goto done;
+			}
+		}
+
+		if (cc != TD_CC_NOERROR && cc != TD_NOTACCESSED
+		    && (++ep->error_count >= 3 || cc == TD_CC_STALL
+			|| cc == TD_DATAOVERRUN)) {
+			status = cc_to_error[cc];
+			if (ep->nextpid == USB_PID_ACK)
+				ep->nextpid = 0;
+			goto done;
+		}
+		/* According to usb spec, zero-length Int transfer signals
+		   finishing of the urb. Hey, does this apply only
+		   for IN endpoints? */
+		if (usb_pipeint(urb->pipe) && !PTD_GET_LEN(ptd)) {
+			status = 0;
+			goto done;
+		}
+
+		/* Relax after previously failed, but later succeeded
+		   or correctly NAK'ed retransmission attempt */
+		if (ep->error_count
+		    && (cc == TD_CC_NOERROR || cc == TD_NOTACCESSED))
+			ep->error_count = 0;
+
+		/* Take into account idiosyncracies of the isp116x chip
+		   regarding toggle bit for failed transfers */
+		if (ep->nextpid == USB_PID_OUT)
+			usb_settoggle(udev, ep->epnum, 1, PTD_GET_TOGGLE(ptd)
+				      ^ (ep->error_count > 0));
+		else if (ep->nextpid == USB_PID_IN)
+			usb_settoggle(udev, ep->epnum, 0, PTD_GET_TOGGLE(ptd)
+				      ^ (ep->error_count > 0));
+
+		switch (ep->nextpid) {
+		case USB_PID_IN:
+		case USB_PID_OUT:
+			urb->actual_length += PTD_GET_COUNT(ptd);
+			if (PTD_GET_ACTIVE(ptd)
+			    || (cc != TD_CC_NOERROR && cc < 0x0E))
+				break;
+			if (urb->transfer_buffer_length != urb->actual_length) {
+				if (short_not_ok)
+					break;
+			} else {
+				if (urb->transfer_flags & URB_ZERO_PACKET
+				    && ep->nextpid == USB_PID_OUT
+				    && !(PTD_GET_COUNT(ptd) % ep->maxpacket)) {
+					DBG("Zero packet requested\n");
+					break;
+				}
+			}
+			/* All data for this URB is transferred, let's finish */
+			if (usb_pipecontrol(urb->pipe))
+				ep->nextpid = USB_PID_ACK;
+			else
+				status = 0;
+			break;
+		case USB_PID_SETUP:
+			if (PTD_GET_ACTIVE(ptd)
+			    || (cc != TD_CC_NOERROR && cc < 0x0E))
+				break;
+			if (urb->transfer_buffer_length == urb->actual_length)
+				ep->nextpid = USB_PID_ACK;
+			else if (usb_pipeout(urb->pipe)) {
+				usb_settoggle(udev, 0, 1, 1);
+				ep->nextpid = USB_PID_OUT;
+			} else {
+				usb_settoggle(udev, 0, 0, 1);
+				ep->nextpid = USB_PID_IN;
+			}
+			break;
+		case USB_PID_ACK:
+			if (PTD_GET_ACTIVE(ptd)
+			    || (cc != TD_CC_NOERROR && cc < 0x0E))
+				break;
+			status = 0;
+			ep->nextpid = 0;
+			break;
+		default:
+			BUG();
+		}
+
+ done:
+		if (status != -EINPROGRESS || urb->unlinked)
+			finish_request(isp116x, ep, urb, status);
+	}
+}
+
+/*
+  Scan transfer lists, schedule transfers, send data off
+  to chip.
+ */
+static void start_atl_transfers(struct isp116x *isp116x)
+{
+	struct isp116x_ep *last_ep = NULL, *ep;
+	struct urb *urb;
+	u16 load = 0;
+	int len, index, speed, byte_time;
+
+	if (atomic_read(&isp116x->atl_finishing))
+		return;
+
+	if (!HC_IS_RUNNING(isp116x_to_hcd(isp116x)->state))
+		return;
+
+	/* FIFO not empty? */
+	if (isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_FULL)
+		return;
+
+	isp116x->atl_active = NULL;
+	isp116x->atl_buflen = isp116x->atl_bufshrt = 0;
+
+	/* Schedule int transfers */
+	if (isp116x->periodic_count) {
+		isp116x->fmindex = index =
+		    (isp116x->fmindex + 1) & (PERIODIC_SIZE - 1);
+		load = isp116x->load[index];
+		if (load) {
+			/* Bring all int transfers for this frame
+			   into the active queue */
+			isp116x->atl_active = last_ep =
+			    isp116x->periodic[index];
+			while (last_ep->next)
+				last_ep = (last_ep->active = last_ep->next);
+			last_ep->active = NULL;
+		}
+	}
+
+	/* Schedule control/bulk transfers */
+	list_for_each_entry(ep, &isp116x->async, schedule) {
+		urb = container_of(ep->hep->urb_list.next,
+				   struct urb, urb_list);
+		speed = urb->dev->speed;
+		byte_time = speed == USB_SPEED_LOW
+		    ? BYTE_TIME_LOWSPEED : BYTE_TIME_FULLSPEED;
+
+		if (ep->nextpid == USB_PID_SETUP) {
+			len = sizeof(struct usb_ctrlrequest);
+		} else if (ep->nextpid == USB_PID_ACK) {
+			len = 0;
+		} else {
+			/* Find current free length ... */
+			len = (MAX_LOAD_LIMIT - load) / byte_time;
+
+			/* ... then limit it to configured max size ... */
+			len = min(len, speed == USB_SPEED_LOW ?
+				  MAX_TRANSFER_SIZE_LOWSPEED :
+				  MAX_TRANSFER_SIZE_FULLSPEED);
+
+			/* ... and finally cut to the multiple of MaxPacketSize,
+			   or to the real length if there's enough room. */
+			if (len <
+			    (urb->transfer_buffer_length -
+			     urb->actual_length)) {
+				len -= len % ep->maxpacket;
+				if (!len)
+					continue;
+			} else
+				len = urb->transfer_buffer_length -
+				    urb->actual_length;
+			BUG_ON(len < 0);
+		}
+
+		load += len * byte_time;
+		if (load > MAX_LOAD_LIMIT)
+			break;
+
+		ep->active = NULL;
+		ep->length = len;
+		if (last_ep)
+			last_ep->active = ep;
+		else
+			isp116x->atl_active = ep;
+		last_ep = ep;
+	}
+
+	/* Avoid starving of endpoints */
+	if ((&isp116x->async)->next != (&isp116x->async)->prev)
+		list_move(&isp116x->async, (&isp116x->async)->next);
+
+	if (isp116x->atl_active) {
+		preproc_atl_queue(isp116x);
+		pack_fifo(isp116x);
+	}
+}
+
+/*
+  Finish the processed transfers
+*/
+static void finish_atl_transfers(struct isp116x *isp116x)
+{
+	if (!isp116x->atl_active)
+		return;
+	/* Fifo not ready? */
+	if (!(isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_DONE))
+		return;
+
+	atomic_inc(&isp116x->atl_finishing);
+	unpack_fifo(isp116x);
+	postproc_atl_queue(isp116x);
+	atomic_dec(&isp116x->atl_finishing);
+}
+
+static irqreturn_t isp116x_irq(struct usb_hcd *hcd)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	u16 irqstat;
+	irqreturn_t ret = IRQ_NONE;
+
+	spin_lock(&isp116x->lock);
+	isp116x_write_reg16(isp116x, HCuPINTENB, 0);
+	irqstat = isp116x_read_reg16(isp116x, HCuPINT);
+	isp116x_write_reg16(isp116x, HCuPINT, irqstat);
+
+	if (irqstat & (HCuPINT_ATL | HCuPINT_SOF)) {
+		ret = IRQ_HANDLED;
+		finish_atl_transfers(isp116x);
+	}
+
+	if (irqstat & HCuPINT_OPR) {
+		u32 intstat = isp116x_read_reg32(isp116x, HCINTSTAT);
+		isp116x_write_reg32(isp116x, HCINTSTAT, intstat);
+		if (intstat & HCINT_UE) {
+			ERR("Unrecoverable error, HC is dead!\n");
+			/* IRQ's are off, we do no DMA,
+			   perfectly ready to die ... */
+			hcd->state = HC_STATE_HALT;
+			usb_hc_died(hcd);
+			ret = IRQ_HANDLED;
+			goto done;
+		}
+		if (intstat & HCINT_RHSC)
+			/* When root hub or any of its ports is going
+			   to come out of suspend, it may take more
+			   than 10ms for status bits to stabilize. */
+			mod_timer(&hcd->rh_timer, jiffies
+				  + msecs_to_jiffies(20) + 1);
+		if (intstat & HCINT_RD) {
+			DBG("---- remote wakeup\n");
+			usb_hcd_resume_root_hub(hcd);
+		}
+		irqstat &= ~HCuPINT_OPR;
+		ret = IRQ_HANDLED;
+	}
+
+	if (irqstat & (HCuPINT_ATL | HCuPINT_SOF)) {
+		start_atl_transfers(isp116x);
+	}
+
+	isp116x_write_reg16(isp116x, HCuPINTENB, isp116x->irqenb);
+      done:
+	spin_unlock(&isp116x->lock);
+	return ret;
+}
+
+/*-----------------------------------------------------------------*/
+
+/* usb 1.1 says max 90% of a frame is available for periodic transfers.
+ * this driver doesn't promise that much since it's got to handle an
+ * IRQ per packet; irq handling latencies also use up that time.
+ */
+
+/* out of 1000 us */
+#define	MAX_PERIODIC_LOAD	600
+static int balance(struct isp116x *isp116x, u16 period, u16 load)
+{
+	int i, branch = -ENOSPC;
+
+	/* search for the least loaded schedule branch of that period
+	   which has enough bandwidth left unreserved. */
+	for (i = 0; i < period; i++) {
+		if (branch < 0 || isp116x->load[branch] > isp116x->load[i]) {
+			int j;
+
+			for (j = i; j < PERIODIC_SIZE; j += period) {
+				if ((isp116x->load[j] + load)
+				    > MAX_PERIODIC_LOAD)
+					break;
+			}
+			if (j < PERIODIC_SIZE)
+				continue;
+			branch = i;
+		}
+	}
+	return branch;
+}
+
+/* NB! ALL the code above this point runs with isp116x->lock
+   held, irqs off
+*/
+
+/*-----------------------------------------------------------------*/
+
+static int isp116x_urb_enqueue(struct usb_hcd *hcd,
+			       struct urb *urb,
+			       gfp_t mem_flags)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	struct usb_device *udev = urb->dev;
+	unsigned int pipe = urb->pipe;
+	int is_out = !usb_pipein(pipe);
+	int type = usb_pipetype(pipe);
+	int epnum = usb_pipeendpoint(pipe);
+	struct usb_host_endpoint *hep = urb->ep;
+	struct isp116x_ep *ep = NULL;
+	unsigned long flags;
+	int i;
+	int ret = 0;
+
+	urb_dbg(urb, "Enqueue");
+
+	if (type == PIPE_ISOCHRONOUS) {
+		ERR("Isochronous transfers not supported\n");
+		urb_dbg(urb, "Refused to enqueue");
+		return -ENXIO;
+	}
+	/* avoid all allocations within spinlocks: request or endpoint */
+	if (!hep->hcpriv) {
+		ep = kzalloc(sizeof *ep, mem_flags);
+		if (!ep)
+			return -ENOMEM;
+	}
+
+	spin_lock_irqsave(&isp116x->lock, flags);
+	if (!HC_IS_RUNNING(hcd->state)) {
+		kfree(ep);
+		ret = -ENODEV;
+		goto fail_not_linked;
+	}
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret) {
+		kfree(ep);
+		goto fail_not_linked;
+	}
+
+	if (hep->hcpriv)
+		ep = hep->hcpriv;
+	else {
+		INIT_LIST_HEAD(&ep->schedule);
+		ep->udev = udev;
+		ep->epnum = epnum;
+		ep->maxpacket = usb_maxpacket(udev, urb->pipe);
+		usb_settoggle(udev, epnum, is_out, 0);
+
+		if (type == PIPE_CONTROL) {
+			ep->nextpid = USB_PID_SETUP;
+		} else if (is_out) {
+			ep->nextpid = USB_PID_OUT;
+		} else {
+			ep->nextpid = USB_PID_IN;
+		}
+
+		if (urb->interval) {
+			/*
+			   With INT URBs submitted, the driver works with SOF
+			   interrupt enabled and ATL interrupt disabled. After
+			   the PTDs are written to fifo ram, the chip starts
+			   fifo processing and usb transfers after the next
+			   SOF and continues until the transfers are finished
+			   (succeeded or failed) or the frame ends. Therefore,
+			   the transfers occur only in every second frame,
+			   while fifo reading/writing and data processing
+			   occur in every other second frame. */
+			if (urb->interval < 2)
+				urb->interval = 2;
+			if (urb->interval > 2 * PERIODIC_SIZE)
+				urb->interval = 2 * PERIODIC_SIZE;
+			ep->period = urb->interval >> 1;
+			ep->branch = PERIODIC_SIZE;
+			ep->load = usb_calc_bus_time(udev->speed,
+						     !is_out,
+						     (type == PIPE_ISOCHRONOUS),
+						     usb_maxpacket(udev, pipe)) /
+			    1000;
+		}
+		hep->hcpriv = ep;
+		ep->hep = hep;
+	}
+
+	/* maybe put endpoint into schedule */
+	switch (type) {
+	case PIPE_CONTROL:
+	case PIPE_BULK:
+		if (list_empty(&ep->schedule))
+			list_add_tail(&ep->schedule, &isp116x->async);
+		break;
+	case PIPE_INTERRUPT:
+		urb->interval = ep->period;
+		ep->length = min_t(u32, ep->maxpacket,
+				 urb->transfer_buffer_length);
+
+		/* urb submitted for already existing endpoint */
+		if (ep->branch < PERIODIC_SIZE)
+			break;
+
+		ep->branch = ret = balance(isp116x, ep->period, ep->load);
+		if (ret < 0)
+			goto fail;
+		ret = 0;
+
+		urb->start_frame = (isp116x->fmindex & (PERIODIC_SIZE - 1))
+		    + ep->branch;
+
+		/* sort each schedule branch by period (slow before fast)
+		   to share the faster parts of the tree without needing
+		   dummy/placeholder nodes */
+		DBG("schedule qh%d/%p branch %d\n", ep->period, ep, ep->branch);
+		for (i = ep->branch; i < PERIODIC_SIZE; i += ep->period) {
+			struct isp116x_ep **prev = &isp116x->periodic[i];
+			struct isp116x_ep *here = *prev;
+
+			while (here && ep != here) {
+				if (ep->period > here->period)
+					break;
+				prev = &here->next;
+				here = *prev;
+			}
+			if (ep != here) {
+				ep->next = here;
+				*prev = ep;
+			}
+			isp116x->load[i] += ep->load;
+		}
+		hcd->self.bandwidth_allocated += ep->load / ep->period;
+
+		/* switch over to SOFint */
+		if (!isp116x->periodic_count++) {
+			isp116x->irqenb &= ~HCuPINT_ATL;
+			isp116x->irqenb |= HCuPINT_SOF;
+			isp116x_write_reg16(isp116x, HCuPINTENB,
+					    isp116x->irqenb);
+		}
+	}
+
+	urb->hcpriv = hep;
+	start_atl_transfers(isp116x);
+
+      fail:
+	if (ret)
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+      fail_not_linked:
+	spin_unlock_irqrestore(&isp116x->lock, flags);
+	return ret;
+}
+
+/*
+   Dequeue URBs.
+*/
+static int isp116x_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+		int status)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	struct usb_host_endpoint *hep;
+	struct isp116x_ep *ep, *ep_act;
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&isp116x->lock, flags);
+	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (rc)
+		goto done;
+
+	hep = urb->hcpriv;
+	ep = hep->hcpriv;
+	WARN_ON(hep != ep->hep);
+
+	/* In front of queue? */
+	if (ep->hep->urb_list.next == &urb->urb_list)
+		/* active? */
+		for (ep_act = isp116x->atl_active; ep_act;
+		     ep_act = ep_act->active)
+			if (ep_act == ep) {
+				VDBG("dequeue, urb %p active; wait for irq\n",
+				     urb);
+				urb = NULL;
+				break;
+			}
+
+	if (urb)
+		finish_request(isp116x, ep, urb, status);
+ done:
+	spin_unlock_irqrestore(&isp116x->lock, flags);
+	return rc;
+}
+
+static void isp116x_endpoint_disable(struct usb_hcd *hcd,
+				     struct usb_host_endpoint *hep)
+{
+	int i;
+	struct isp116x_ep *ep = hep->hcpriv;
+
+	if (!ep)
+		return;
+
+	/* assume we'd just wait for the irq */
+	for (i = 0; i < 100 && !list_empty(&hep->urb_list); i++)
+		msleep(3);
+	if (!list_empty(&hep->urb_list))
+		WARNING("ep %p not empty?\n", ep);
+
+	kfree(ep);
+	hep->hcpriv = NULL;
+}
+
+static int isp116x_get_frame(struct usb_hcd *hcd)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	u32 fmnum;
+	unsigned long flags;
+
+	spin_lock_irqsave(&isp116x->lock, flags);
+	fmnum = isp116x_read_reg32(isp116x, HCFMNUM);
+	spin_unlock_irqrestore(&isp116x->lock, flags);
+	return (int)fmnum;
+}
+
+/*
+  Adapted from ohci-hub.c. Currently we don't support autosuspend.
+*/
+static int isp116x_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	int ports, i, changed = 0;
+	unsigned long flags;
+
+	if (!HC_IS_RUNNING(hcd->state))
+		return -ESHUTDOWN;
+
+	/* Report no status change now, if we are scheduled to be
+	   called later */
+	if (timer_pending(&hcd->rh_timer))
+		return 0;
+
+	ports = isp116x->rhdesca & RH_A_NDP;
+	spin_lock_irqsave(&isp116x->lock, flags);
+	isp116x->rhstatus = isp116x_read_reg32(isp116x, HCRHSTATUS);
+	if (isp116x->rhstatus & (RH_HS_LPSC | RH_HS_OCIC))
+		buf[0] = changed = 1;
+	else
+		buf[0] = 0;
+
+	for (i = 0; i < ports; i++) {
+		u32 status = isp116x_read_reg32(isp116x, i ? HCRHPORT2 : HCRHPORT1);
+
+		if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
+			      | RH_PS_OCIC | RH_PS_PRSC)) {
+			changed = 1;
+			buf[0] |= 1 << (i + 1);
+		}
+	}
+	spin_unlock_irqrestore(&isp116x->lock, flags);
+	return changed;
+}
+
+static void isp116x_hub_descriptor(struct isp116x *isp116x,
+				   struct usb_hub_descriptor *desc)
+{
+	u32 reg = isp116x->rhdesca;
+
+	desc->bDescriptorType = USB_DT_HUB;
+	desc->bDescLength = 9;
+	desc->bHubContrCurrent = 0;
+	desc->bNbrPorts = (u8) (reg & 0x3);
+	/* Power switching, device type, overcurrent. */
+	desc->wHubCharacteristics = cpu_to_le16((u16) ((reg >> 8) &
+						       (HUB_CHAR_LPSM |
+							HUB_CHAR_COMPOUND |
+							HUB_CHAR_OCPM)));
+	desc->bPwrOn2PwrGood = (u8) ((reg >> 24) & 0xff);
+	/* ports removable, and legacy PortPwrCtrlMask */
+	desc->u.hs.DeviceRemovable[0] = 0;
+	desc->u.hs.DeviceRemovable[1] = ~0;
+}
+
+/* Perform reset of a given port.
+   It would be great to just start the reset and let the
+   USB core to clear the reset in due time. However,
+   root hub ports should be reset for at least 50 ms, while
+   our chip stays in reset for about 10 ms. I.e., we must
+   repeatedly reset it ourself here.
+*/
+static inline void root_port_reset(struct isp116x *isp116x, unsigned port)
+{
+	u32 tmp;
+	unsigned long flags, t;
+
+	/* Root hub reset should be 50 ms, but some devices
+	   want it even longer. */
+	t = jiffies + msecs_to_jiffies(100);
+
+	while (time_before(jiffies, t)) {
+		spin_lock_irqsave(&isp116x->lock, flags);
+		/* spin until any current reset finishes */
+		for (;;) {
+			tmp = isp116x_read_reg32(isp116x, port ?
+						 HCRHPORT2 : HCRHPORT1);
+			if (!(tmp & RH_PS_PRS))
+				break;
+			udelay(500);
+		}
+		/* Don't reset a disconnected port */
+		if (!(tmp & RH_PS_CCS)) {
+			spin_unlock_irqrestore(&isp116x->lock, flags);
+			break;
+		}
+		/* Reset lasts 10ms (claims datasheet) */
+		isp116x_write_reg32(isp116x, port ? HCRHPORT2 :
+				    HCRHPORT1, (RH_PS_PRS));
+		spin_unlock_irqrestore(&isp116x->lock, flags);
+		msleep(10);
+	}
+}
+
+/* Adapted from ohci-hub.c */
+static int isp116x_hub_control(struct usb_hcd *hcd,
+			       u16 typeReq,
+			       u16 wValue, u16 wIndex, char *buf, u16 wLength)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	int ret = 0;
+	unsigned long flags;
+	int ports = isp116x->rhdesca & RH_A_NDP;
+	u32 tmp = 0;
+
+	switch (typeReq) {
+	case ClearHubFeature:
+		DBG("ClearHubFeature: ");
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+			DBG("C_HUB_OVER_CURRENT\n");
+			spin_lock_irqsave(&isp116x->lock, flags);
+			isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_OCIC);
+			spin_unlock_irqrestore(&isp116x->lock, flags);
+			fallthrough;
+		case C_HUB_LOCAL_POWER:
+			DBG("C_HUB_LOCAL_POWER\n");
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetHubFeature:
+		DBG("SetHubFeature: ");
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			DBG("C_HUB_OVER_CURRENT or C_HUB_LOCAL_POWER\n");
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case GetHubDescriptor:
+		DBG("GetHubDescriptor\n");
+		isp116x_hub_descriptor(isp116x,
+				       (struct usb_hub_descriptor *)buf);
+		break;
+	case GetHubStatus:
+		DBG("GetHubStatus\n");
+		*(__le32 *) buf = 0;
+		break;
+	case GetPortStatus:
+		DBG("GetPortStatus\n");
+		if (!wIndex || wIndex > ports)
+			goto error;
+		spin_lock_irqsave(&isp116x->lock, flags);
+		tmp = isp116x_read_reg32(isp116x, (--wIndex) ? HCRHPORT2 : HCRHPORT1);
+		spin_unlock_irqrestore(&isp116x->lock, flags);
+		*(__le32 *) buf = cpu_to_le32(tmp);
+		DBG("GetPortStatus: port[%d]  %08x\n", wIndex + 1, tmp);
+		break;
+	case ClearPortFeature:
+		DBG("ClearPortFeature: ");
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			DBG("USB_PORT_FEAT_ENABLE\n");
+			tmp = RH_PS_CCS;
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			DBG("USB_PORT_FEAT_C_ENABLE\n");
+			tmp = RH_PS_PESC;
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			DBG("USB_PORT_FEAT_SUSPEND\n");
+			tmp = RH_PS_POCI;
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			DBG("USB_PORT_FEAT_C_SUSPEND\n");
+			tmp = RH_PS_PSSC;
+			break;
+		case USB_PORT_FEAT_POWER:
+			DBG("USB_PORT_FEAT_POWER\n");
+			tmp = RH_PS_LSDA;
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			DBG("USB_PORT_FEAT_C_CONNECTION\n");
+			tmp = RH_PS_CSC;
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			DBG("USB_PORT_FEAT_C_OVER_CURRENT\n");
+			tmp = RH_PS_OCIC;
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			DBG("USB_PORT_FEAT_C_RESET\n");
+			tmp = RH_PS_PRSC;
+			break;
+		default:
+			goto error;
+		}
+		spin_lock_irqsave(&isp116x->lock, flags);
+		isp116x_write_reg32(isp116x, wIndex
+				    ? HCRHPORT2 : HCRHPORT1, tmp);
+		spin_unlock_irqrestore(&isp116x->lock, flags);
+		break;
+	case SetPortFeature:
+		DBG("SetPortFeature: ");
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			DBG("USB_PORT_FEAT_SUSPEND\n");
+			spin_lock_irqsave(&isp116x->lock, flags);
+			isp116x_write_reg32(isp116x, wIndex
+					    ? HCRHPORT2 : HCRHPORT1, RH_PS_PSS);
+			spin_unlock_irqrestore(&isp116x->lock, flags);
+			break;
+		case USB_PORT_FEAT_POWER:
+			DBG("USB_PORT_FEAT_POWER\n");
+			spin_lock_irqsave(&isp116x->lock, flags);
+			isp116x_write_reg32(isp116x, wIndex
+					    ? HCRHPORT2 : HCRHPORT1, RH_PS_PPS);
+			spin_unlock_irqrestore(&isp116x->lock, flags);
+			break;
+		case USB_PORT_FEAT_RESET:
+			DBG("USB_PORT_FEAT_RESET\n");
+			root_port_reset(isp116x, wIndex);
+			break;
+		default:
+			goto error;
+		}
+		break;
+
+	default:
+	      error:
+		/* "protocol stall" on error */
+		DBG("PROTOCOL STALL\n");
+		ret = -EPIPE;
+	}
+	return ret;
+}
+
+/*-----------------------------------------------------------------*/
+
+#ifdef CONFIG_DEBUG_FS
+
+static void dump_irq(struct seq_file *s, char *label, u16 mask)
+{
+	seq_printf(s, "%s %04x%s%s%s%s%s%s\n", label, mask,
+		   mask & HCuPINT_CLKRDY ? " clkrdy" : "",
+		   mask & HCuPINT_SUSP ? " susp" : "",
+		   mask & HCuPINT_OPR ? " opr" : "",
+		   mask & HCuPINT_AIIEOT ? " eot" : "",
+		   mask & HCuPINT_ATL ? " atl" : "",
+		   mask & HCuPINT_SOF ? " sof" : "");
+}
+
+static void dump_int(struct seq_file *s, char *label, u32 mask)
+{
+	seq_printf(s, "%s %08x%s%s%s%s%s%s%s\n", label, mask,
+		   mask & HCINT_MIE ? " MIE" : "",
+		   mask & HCINT_RHSC ? " rhsc" : "",
+		   mask & HCINT_FNO ? " fno" : "",
+		   mask & HCINT_UE ? " ue" : "",
+		   mask & HCINT_RD ? " rd" : "",
+		   mask & HCINT_SF ? " sof" : "", mask & HCINT_SO ? " so" : "");
+}
+
+static int isp116x_debug_show(struct seq_file *s, void *unused)
+{
+	struct isp116x *isp116x = s->private;
+
+	seq_printf(s, "%s\n%s version %s\n",
+		   isp116x_to_hcd(isp116x)->product_desc, hcd_name,
+		   DRIVER_VERSION);
+
+	if (HC_IS_SUSPENDED(isp116x_to_hcd(isp116x)->state)) {
+		seq_printf(s, "HCD is suspended\n");
+		return 0;
+	}
+	if (!HC_IS_RUNNING(isp116x_to_hcd(isp116x)->state)) {
+		seq_printf(s, "HCD not running\n");
+		return 0;
+	}
+
+	spin_lock_irq(&isp116x->lock);
+	dump_irq(s, "hc_irq_enable", isp116x_read_reg16(isp116x, HCuPINTENB));
+	dump_irq(s, "hc_irq_status", isp116x_read_reg16(isp116x, HCuPINT));
+	dump_int(s, "hc_int_enable", isp116x_read_reg32(isp116x, HCINTENB));
+	dump_int(s, "hc_int_status", isp116x_read_reg32(isp116x, HCINTSTAT));
+	isp116x_show_regs_seq(isp116x, s);
+	spin_unlock_irq(&isp116x->lock);
+	seq_printf(s, "\n");
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(isp116x_debug);
+
+static void create_debug_file(struct isp116x *isp116x)
+{
+	debugfs_create_file(hcd_name, S_IRUGO, usb_debug_root, isp116x,
+			    &isp116x_debug_fops);
+}
+
+static void remove_debug_file(struct isp116x *isp116x)
+{
+	debugfs_lookup_and_remove(hcd_name, usb_debug_root);
+}
+
+#else
+
+static inline void create_debug_file(struct isp116x *isp116x) { }
+static inline void remove_debug_file(struct isp116x *isp116x) { }
+
+#endif				/* CONFIG_DEBUG_FS */
+
+/*-----------------------------------------------------------------*/
+
+/*
+  Software reset - can be called from any contect.
+*/
+static int isp116x_sw_reset(struct isp116x *isp116x)
+{
+	int retries = 15;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&isp116x->lock, flags);
+	isp116x_write_reg16(isp116x, HCSWRES, HCSWRES_MAGIC);
+	isp116x_write_reg32(isp116x, HCCMDSTAT, HCCMDSTAT_HCR);
+	while (--retries) {
+		/* It usually resets within 1 ms */
+		mdelay(1);
+		if (!(isp116x_read_reg32(isp116x, HCCMDSTAT) & HCCMDSTAT_HCR))
+			break;
+	}
+	if (!retries) {
+		ERR("Software reset timeout\n");
+		ret = -ETIME;
+	}
+	spin_unlock_irqrestore(&isp116x->lock, flags);
+	return ret;
+}
+
+static int isp116x_reset(struct usb_hcd *hcd)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	unsigned long t;
+	u16 clkrdy = 0;
+	int ret, timeout = 15 /* ms */ ;
+
+	ret = isp116x_sw_reset(isp116x);
+	if (ret)
+		return ret;
+
+	t = jiffies + msecs_to_jiffies(timeout);
+	while (time_before_eq(jiffies, t)) {
+		msleep(4);
+		spin_lock_irq(&isp116x->lock);
+		clkrdy = isp116x_read_reg16(isp116x, HCuPINT) & HCuPINT_CLKRDY;
+		spin_unlock_irq(&isp116x->lock);
+		if (clkrdy)
+			break;
+	}
+	if (!clkrdy) {
+		ERR("Clock not ready after %dms\n", timeout);
+		/* After sw_reset the clock won't report to be ready, if
+		   H_WAKEUP pin is high. */
+		ERR("Please make sure that the H_WAKEUP pin is pulled low!\n");
+		ret = -ENODEV;
+	}
+	return ret;
+}
+
+static void isp116x_stop(struct usb_hcd *hcd)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&isp116x->lock, flags);
+	isp116x_write_reg16(isp116x, HCuPINTENB, 0);
+
+	/* Switch off ports' power, some devices don't come up
+	   after next 'insmod' without this */
+	val = isp116x_read_reg32(isp116x, HCRHDESCA);
+	val &= ~(RH_A_NPS | RH_A_PSM);
+	isp116x_write_reg32(isp116x, HCRHDESCA, val);
+	isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPS);
+	spin_unlock_irqrestore(&isp116x->lock, flags);
+
+	isp116x_sw_reset(isp116x);
+}
+
+/*
+  Configure the chip. The chip must be successfully reset by now.
+*/
+static int isp116x_start(struct usb_hcd *hcd)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	struct isp116x_platform_data *board = isp116x->board;
+	u32 val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&isp116x->lock, flags);
+
+	/* clear interrupt status and disable all interrupt sources */
+	isp116x_write_reg16(isp116x, HCuPINT, 0xff);
+	isp116x_write_reg16(isp116x, HCuPINTENB, 0);
+
+	val = isp116x_read_reg16(isp116x, HCCHIPID);
+	if ((val & HCCHIPID_MASK) != HCCHIPID_MAGIC) {
+		ERR("Invalid chip ID %04x\n", val);
+		spin_unlock_irqrestore(&isp116x->lock, flags);
+		return -ENODEV;
+	}
+
+	/* To be removed in future */
+	hcd->uses_new_polling = 1;
+
+	isp116x_write_reg16(isp116x, HCITLBUFLEN, ISP116x_ITL_BUFSIZE);
+	isp116x_write_reg16(isp116x, HCATLBUFLEN, ISP116x_ATL_BUFSIZE);
+
+	/* ----- HW conf */
+	val = HCHWCFG_INT_ENABLE | HCHWCFG_DBWIDTH(1);
+	if (board->sel15Kres)
+		val |= HCHWCFG_15KRSEL;
+	/* Remote wakeup won't work without working clock */
+	if (board->remote_wakeup_enable)
+		val |= HCHWCFG_CLKNOTSTOP;
+	if (board->oc_enable)
+		val |= HCHWCFG_ANALOG_OC;
+	if (board->int_act_high)
+		val |= HCHWCFG_INT_POL;
+	if (board->int_edge_triggered)
+		val |= HCHWCFG_INT_TRIGGER;
+	isp116x_write_reg16(isp116x, HCHWCFG, val);
+
+	/* ----- Root hub conf */
+	val = (25 << 24) & RH_A_POTPGT;
+	/* AN10003_1.pdf recommends RH_A_NPS (no power switching) to
+	   be always set. Yet, instead, we request individual port
+	   power switching. */
+	val |= RH_A_PSM;
+	/* Report overcurrent per port */
+	val |= RH_A_OCPM;
+	isp116x_write_reg32(isp116x, HCRHDESCA, val);
+	isp116x->rhdesca = isp116x_read_reg32(isp116x, HCRHDESCA);
+
+	val = RH_B_PPCM;
+	isp116x_write_reg32(isp116x, HCRHDESCB, val);
+	isp116x->rhdescb = isp116x_read_reg32(isp116x, HCRHDESCB);
+
+	val = 0;
+	if (board->remote_wakeup_enable) {
+		if (!device_can_wakeup(hcd->self.controller))
+			device_init_wakeup(hcd->self.controller, 1);
+		val |= RH_HS_DRWE;
+	}
+	isp116x_write_reg32(isp116x, HCRHSTATUS, val);
+	isp116x->rhstatus = isp116x_read_reg32(isp116x, HCRHSTATUS);
+
+	isp116x_write_reg32(isp116x, HCFMINTVL, 0x27782edf);
+
+	hcd->state = HC_STATE_RUNNING;
+
+	/* Set up interrupts */
+	isp116x->intenb = HCINT_MIE | HCINT_RHSC | HCINT_UE;
+	if (board->remote_wakeup_enable)
+		isp116x->intenb |= HCINT_RD;
+	isp116x->irqenb = HCuPINT_ATL | HCuPINT_OPR;	/* | HCuPINT_SUSP; */
+	isp116x_write_reg32(isp116x, HCINTENB, isp116x->intenb);
+	isp116x_write_reg16(isp116x, HCuPINTENB, isp116x->irqenb);
+
+	/* Go operational */
+	val = HCCONTROL_USB_OPER;
+	if (board->remote_wakeup_enable)
+		val |= HCCONTROL_RWE;
+	isp116x_write_reg32(isp116x, HCCONTROL, val);
+
+	/* Disable ports to avoid race in device enumeration */
+	isp116x_write_reg32(isp116x, HCRHPORT1, RH_PS_CCS);
+	isp116x_write_reg32(isp116x, HCRHPORT2, RH_PS_CCS);
+
+	isp116x_show_regs_log(isp116x);
+	spin_unlock_irqrestore(&isp116x->lock, flags);
+	return 0;
+}
+
+#ifdef	CONFIG_PM
+
+static int isp116x_bus_suspend(struct usb_hcd *hcd)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	unsigned long flags;
+	u32 val;
+	int ret = 0;
+
+	spin_lock_irqsave(&isp116x->lock, flags);
+	val = isp116x_read_reg32(isp116x, HCCONTROL);
+
+	switch (val & HCCONTROL_HCFS) {
+	case HCCONTROL_USB_OPER:
+		spin_unlock_irqrestore(&isp116x->lock, flags);
+		val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE);
+		val |= HCCONTROL_USB_SUSPEND;
+		if (hcd->self.root_hub->do_remote_wakeup)
+			val |= HCCONTROL_RWE;
+		/* Wait for usb transfers to finish */
+		msleep(2);
+		spin_lock_irqsave(&isp116x->lock, flags);
+		isp116x_write_reg32(isp116x, HCCONTROL, val);
+		spin_unlock_irqrestore(&isp116x->lock, flags);
+		/* Wait for devices to suspend */
+		msleep(5);
+		break;
+	case HCCONTROL_USB_RESUME:
+		isp116x_write_reg32(isp116x, HCCONTROL,
+				    (val & ~HCCONTROL_HCFS) |
+				    HCCONTROL_USB_RESET);
+		fallthrough;
+	case HCCONTROL_USB_RESET:
+		ret = -EBUSY;
+		fallthrough;
+	default:		/* HCCONTROL_USB_SUSPEND */
+		spin_unlock_irqrestore(&isp116x->lock, flags);
+		break;
+	}
+
+	return ret;
+}
+
+static int isp116x_bus_resume(struct usb_hcd *hcd)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	u32 val;
+
+	msleep(5);
+	spin_lock_irq(&isp116x->lock);
+
+	val = isp116x_read_reg32(isp116x, HCCONTROL);
+	switch (val & HCCONTROL_HCFS) {
+	case HCCONTROL_USB_SUSPEND:
+		val &= ~HCCONTROL_HCFS;
+		val |= HCCONTROL_USB_RESUME;
+		isp116x_write_reg32(isp116x, HCCONTROL, val);
+		break;
+	case HCCONTROL_USB_RESUME:
+		break;
+	case HCCONTROL_USB_OPER:
+		spin_unlock_irq(&isp116x->lock);
+		return 0;
+	default:
+		/* HCCONTROL_USB_RESET: this may happen, when during
+		   suspension the HC lost power. Reinitialize completely */
+		spin_unlock_irq(&isp116x->lock);
+		DBG("Chip has been reset while suspended. Reinit from scratch.\n");
+		isp116x_reset(hcd);
+		isp116x_start(hcd);
+		isp116x_hub_control(hcd, SetPortFeature,
+				    USB_PORT_FEAT_POWER, 1, NULL, 0);
+		if ((isp116x->rhdesca & RH_A_NDP) == 2)
+			isp116x_hub_control(hcd, SetPortFeature,
+					    USB_PORT_FEAT_POWER, 2, NULL, 0);
+		return 0;
+	}
+
+	val = isp116x->rhdesca & RH_A_NDP;
+	while (val--) {
+		u32 stat =
+		    isp116x_read_reg32(isp116x, val ? HCRHPORT2 : HCRHPORT1);
+		/* force global, not selective, resume */
+		if (!(stat & RH_PS_PSS))
+			continue;
+		DBG("%s: Resuming port %d\n", __func__, val);
+		isp116x_write_reg32(isp116x, RH_PS_POCI, val
+				    ? HCRHPORT2 : HCRHPORT1);
+	}
+	spin_unlock_irq(&isp116x->lock);
+
+	hcd->state = HC_STATE_RESUMING;
+	msleep(USB_RESUME_TIMEOUT);
+
+	/* Go operational */
+	spin_lock_irq(&isp116x->lock);
+	val = isp116x_read_reg32(isp116x, HCCONTROL);
+	isp116x_write_reg32(isp116x, HCCONTROL,
+			    (val & ~HCCONTROL_HCFS) | HCCONTROL_USB_OPER);
+	spin_unlock_irq(&isp116x->lock);
+	hcd->state = HC_STATE_RUNNING;
+
+	return 0;
+}
+
+#else
+
+#define	isp116x_bus_suspend	NULL
+#define	isp116x_bus_resume	NULL
+
+#endif
+
+static const struct hc_driver isp116x_hc_driver = {
+	.description = hcd_name,
+	.product_desc = "ISP116x Host Controller",
+	.hcd_priv_size = sizeof(struct isp116x),
+
+	.irq = isp116x_irq,
+	.flags = HCD_USB11,
+
+	.reset = isp116x_reset,
+	.start = isp116x_start,
+	.stop = isp116x_stop,
+
+	.urb_enqueue = isp116x_urb_enqueue,
+	.urb_dequeue = isp116x_urb_dequeue,
+	.endpoint_disable = isp116x_endpoint_disable,
+
+	.get_frame_number = isp116x_get_frame,
+
+	.hub_status_data = isp116x_hub_status_data,
+	.hub_control = isp116x_hub_control,
+	.bus_suspend = isp116x_bus_suspend,
+	.bus_resume = isp116x_bus_resume,
+};
+
+/*----------------------------------------------------------------*/
+
+static int isp116x_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct isp116x *isp116x;
+	struct resource *res;
+
+	if (!hcd)
+		return 0;
+	isp116x = hcd_to_isp116x(hcd);
+	remove_debug_file(isp116x);
+	usb_remove_hcd(hcd);
+
+	iounmap(isp116x->data_reg);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res)
+		release_mem_region(res->start, 2);
+	iounmap(isp116x->addr_reg);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res)
+		release_mem_region(res->start, 2);
+
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+static int isp116x_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct isp116x *isp116x;
+	struct resource *addr, *data, *ires;
+	void __iomem *addr_reg;
+	void __iomem *data_reg;
+	int irq;
+	int ret = 0;
+	unsigned long irqflags;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	if (pdev->num_resources < 3) {
+		ret = -ENODEV;
+		goto err1;
+	}
+
+	data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	addr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+	if (!addr || !data || !ires) {
+		ret = -ENODEV;
+		goto err1;
+	}
+
+	irq = ires->start;
+	irqflags = ires->flags & IRQF_TRIGGER_MASK;
+
+	if (!request_mem_region(addr->start, 2, hcd_name)) {
+		ret = -EBUSY;
+		goto err1;
+	}
+	addr_reg = ioremap(addr->start, resource_size(addr));
+	if (addr_reg == NULL) {
+		ret = -ENOMEM;
+		goto err2;
+	}
+	if (!request_mem_region(data->start, 2, hcd_name)) {
+		ret = -EBUSY;
+		goto err3;
+	}
+	data_reg = ioremap(data->start, resource_size(data));
+	if (data_reg == NULL) {
+		ret = -ENOMEM;
+		goto err4;
+	}
+
+	/* allocate and initialize hcd */
+	hcd = usb_create_hcd(&isp116x_hc_driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		ret = -ENOMEM;
+		goto err5;
+	}
+	/* this rsrc_start is bogus */
+	hcd->rsrc_start = addr->start;
+	isp116x = hcd_to_isp116x(hcd);
+	isp116x->data_reg = data_reg;
+	isp116x->addr_reg = addr_reg;
+	spin_lock_init(&isp116x->lock);
+	INIT_LIST_HEAD(&isp116x->async);
+	isp116x->board = dev_get_platdata(&pdev->dev);
+
+	if (!isp116x->board) {
+		ERR("Platform data structure not initialized\n");
+		ret = -ENODEV;
+		goto err6;
+	}
+	if (isp116x_check_platform_delay(isp116x)) {
+		ERR("USE_PLATFORM_DELAY defined, but delay function not "
+		    "implemented.\n");
+		ERR("See comments in drivers/usb/host/isp116x-hcd.c\n");
+		ret = -ENODEV;
+		goto err6;
+	}
+
+	ret = usb_add_hcd(hcd, irq, irqflags);
+	if (ret)
+		goto err6;
+
+	device_wakeup_enable(hcd->self.controller);
+
+	create_debug_file(isp116x);
+
+	return 0;
+
+      err6:
+	usb_put_hcd(hcd);
+      err5:
+	iounmap(data_reg);
+      err4:
+	release_mem_region(data->start, 2);
+      err3:
+	iounmap(addr_reg);
+      err2:
+	release_mem_region(addr->start, 2);
+      err1:
+	ERR("init error, %d\n", ret);
+	return ret;
+}
+
+#ifdef	CONFIG_PM
+/*
+  Suspend of platform device
+*/
+static int isp116x_suspend(struct platform_device *dev, pm_message_t state)
+{
+	VDBG("%s: state %x\n", __func__, state.event);
+	return 0;
+}
+
+/*
+  Resume platform device
+*/
+static int isp116x_resume(struct platform_device *dev)
+{
+	VDBG("%s\n", __func__);
+	return 0;
+}
+
+#else
+
+#define	isp116x_suspend    NULL
+#define	isp116x_resume     NULL
+
+#endif
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:isp116x-hcd");
+
+static struct platform_driver isp116x_driver = {
+	.probe = isp116x_probe,
+	.remove = isp116x_remove,
+	.suspend = isp116x_suspend,
+	.resume = isp116x_resume,
+	.driver = {
+		.name = hcd_name,
+	},
+};
+
+module_platform_driver(isp116x_driver);
diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
new file mode 100644
index 000000000..84904025f
--- /dev/null
+++ b/drivers/usb/host/isp116x.h
@@ -0,0 +1,595 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ISP116x register declarations and HCD data structures
+ *
+ * Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee>
+ * Portions:
+ * Copyright (C) 2004 Lothar Wassmann
+ * Copyright (C) 2004 Psion Teklogix
+ * Copyright (C) 2004 David Brownell
+ */
+
+/* us of 1ms frame */
+#define  MAX_LOAD_LIMIT		850
+
+/* Full speed: max # of bytes to transfer for a single urb
+   at a time must be < 1024 && must be multiple of 64.
+   832 allows transferring 4kiB within 5 frames. */
+#define MAX_TRANSFER_SIZE_FULLSPEED	832
+
+/* Low speed: there is no reason to schedule in very big
+   chunks; often the requested long transfers are for
+   string descriptors containing short strings. */
+#define MAX_TRANSFER_SIZE_LOWSPEED	64
+
+/* Bytetime (us), a rough indication of how much time it
+   would take to transfer a byte of useful data over USB */
+#define BYTE_TIME_FULLSPEED	1
+#define BYTE_TIME_LOWSPEED	20
+
+/* Buffer sizes */
+#define ISP116x_BUF_SIZE	4096
+#define ISP116x_ITL_BUFSIZE	0
+#define ISP116x_ATL_BUFSIZE	((ISP116x_BUF_SIZE) - 2*(ISP116x_ITL_BUFSIZE))
+
+#define ISP116x_WRITE_OFFSET	0x80
+
+/*------------ ISP116x registers/bits ------------*/
+#define	HCREVISION	0x00
+#define	HCCONTROL	0x01
+#define		HCCONTROL_HCFS	(3 << 6)	/* host controller
+						   functional state */
+#define		HCCONTROL_USB_RESET	(0 << 6)
+#define		HCCONTROL_USB_RESUME	(1 << 6)
+#define		HCCONTROL_USB_OPER	(2 << 6)
+#define		HCCONTROL_USB_SUSPEND	(3 << 6)
+#define		HCCONTROL_RWC	(1 << 9)	/* remote wakeup connected */
+#define		HCCONTROL_RWE	(1 << 10)	/* remote wakeup enable */
+#define	HCCMDSTAT	0x02
+#define		HCCMDSTAT_HCR	(1 << 0)	/* host controller reset */
+#define		HCCMDSTAT_SOC	(3 << 16)	/* scheduling overrun count */
+#define	HCINTSTAT	0x03
+#define		HCINT_SO	(1 << 0)	/* scheduling overrun */
+#define		HCINT_WDH	(1 << 1)	/* writeback of done_head */
+#define		HCINT_SF	(1 << 2)	/* start frame */
+#define		HCINT_RD	(1 << 3)	/* resume detect */
+#define		HCINT_UE	(1 << 4)	/* unrecoverable error */
+#define		HCINT_FNO	(1 << 5)	/* frame number overflow */
+#define		HCINT_RHSC	(1 << 6)	/* root hub status change */
+#define		HCINT_OC	(1 << 30)	/* ownership change */
+#define		HCINT_MIE	(1 << 31)	/* master interrupt enable */
+#define	HCINTENB	0x04
+#define	HCINTDIS	0x05
+#define	HCFMINTVL	0x0d
+#define	HCFMREM		0x0e
+#define	HCFMNUM		0x0f
+#define	HCLSTHRESH	0x11
+#define	HCRHDESCA	0x12
+#define		RH_A_NDP	(0x3 << 0)	/* # downstream ports */
+#define		RH_A_PSM	(1 << 8)	/* power switching mode */
+#define		RH_A_NPS	(1 << 9)	/* no power switching */
+#define		RH_A_DT		(1 << 10)	/* device type (mbz) */
+#define		RH_A_OCPM	(1 << 11)	/* overcurrent protection
+						   mode */
+#define		RH_A_NOCP	(1 << 12)	/* no overcurrent protection */
+#define		RH_A_POTPGT	(0xff << 24)	/* power on -> power good
+						   time */
+#define	HCRHDESCB	0x13
+#define		RH_B_DR		(0xffff << 0)	/* device removable flags */
+#define		RH_B_PPCM	(0xffff << 16)	/* port power control mask */
+#define	HCRHSTATUS	0x14
+#define		RH_HS_LPS	(1 << 0)	/* local power status */
+#define		RH_HS_OCI	(1 << 1)	/* over current indicator */
+#define		RH_HS_DRWE	(1 << 15)	/* device remote wakeup
+						   enable */
+#define		RH_HS_LPSC	(1 << 16)	/* local power status change */
+#define		RH_HS_OCIC	(1 << 17)	/* over current indicator
+						   change */
+#define		RH_HS_CRWE	(1 << 31)	/* clear remote wakeup
+						   enable */
+#define	HCRHPORT1	0x15
+#define		RH_PS_CCS	(1 << 0)	/* current connect status */
+#define		RH_PS_PES	(1 << 1)	/* port enable status */
+#define		RH_PS_PSS	(1 << 2)	/* port suspend status */
+#define		RH_PS_POCI	(1 << 3)	/* port over current
+						   indicator */
+#define		RH_PS_PRS	(1 << 4)	/* port reset status */
+#define		RH_PS_PPS	(1 << 8)	/* port power status */
+#define		RH_PS_LSDA	(1 << 9)	/* low speed device attached */
+#define		RH_PS_CSC	(1 << 16)	/* connect status change */
+#define		RH_PS_PESC	(1 << 17)	/* port enable status change */
+#define		RH_PS_PSSC	(1 << 18)	/* port suspend status
+						   change */
+#define		RH_PS_OCIC	(1 << 19)	/* over current indicator
+						   change */
+#define		RH_PS_PRSC	(1 << 20)	/* port reset status change */
+#define		HCRHPORT_CLRMASK	(0x1f << 16)
+#define	HCRHPORT2	0x16
+#define	HCHWCFG		0x20
+#define		HCHWCFG_15KRSEL		(1 << 12)
+#define		HCHWCFG_CLKNOTSTOP	(1 << 11)
+#define		HCHWCFG_ANALOG_OC	(1 << 10)
+#define		HCHWCFG_DACK_MODE	(1 << 8)
+#define		HCHWCFG_EOT_POL		(1 << 7)
+#define		HCHWCFG_DACK_POL	(1 << 6)
+#define		HCHWCFG_DREQ_POL	(1 << 5)
+#define		HCHWCFG_DBWIDTH_MASK	(0x03 << 3)
+#define		HCHWCFG_DBWIDTH(n)	(((n) << 3) & HCHWCFG_DBWIDTH_MASK)
+#define		HCHWCFG_INT_POL		(1 << 2)
+#define		HCHWCFG_INT_TRIGGER	(1 << 1)
+#define		HCHWCFG_INT_ENABLE	(1 << 0)
+#define	HCDMACFG	0x21
+#define		HCDMACFG_BURST_LEN_MASK	(0x03 << 5)
+#define		HCDMACFG_BURST_LEN(n)	(((n) << 5) & HCDMACFG_BURST_LEN_MASK)
+#define		HCDMACFG_BURST_LEN_1	HCDMACFG_BURST_LEN(0)
+#define		HCDMACFG_BURST_LEN_4	HCDMACFG_BURST_LEN(1)
+#define		HCDMACFG_BURST_LEN_8	HCDMACFG_BURST_LEN(2)
+#define		HCDMACFG_DMA_ENABLE	(1 << 4)
+#define		HCDMACFG_BUF_TYPE_MASK	(0x07 << 1)
+#define		HCDMACFG_CTR_SEL	(1 << 2)
+#define		HCDMACFG_ITLATL_SEL	(1 << 1)
+#define		HCDMACFG_DMA_RW_SELECT	(1 << 0)
+#define	HCXFERCTR	0x22
+#define	HCuPINT		0x24
+#define		HCuPINT_SOF		(1 << 0)
+#define		HCuPINT_ATL		(1 << 1)
+#define		HCuPINT_AIIEOT		(1 << 2)
+#define		HCuPINT_OPR		(1 << 4)
+#define		HCuPINT_SUSP		(1 << 5)
+#define		HCuPINT_CLKRDY		(1 << 6)
+#define	HCuPINTENB	0x25
+#define	HCCHIPID	0x27
+#define		HCCHIPID_MASK		0xff00
+#define		HCCHIPID_MAGIC		0x6100
+#define	HCSCRATCH	0x28
+#define	HCSWRES		0x29
+#define		HCSWRES_MAGIC		0x00f6
+#define	HCITLBUFLEN	0x2a
+#define	HCATLBUFLEN	0x2b
+#define	HCBUFSTAT	0x2c
+#define		HCBUFSTAT_ITL0_FULL	(1 << 0)
+#define		HCBUFSTAT_ITL1_FULL	(1 << 1)
+#define		HCBUFSTAT_ATL_FULL	(1 << 2)
+#define		HCBUFSTAT_ITL0_DONE	(1 << 3)
+#define		HCBUFSTAT_ITL1_DONE	(1 << 4)
+#define		HCBUFSTAT_ATL_DONE	(1 << 5)
+#define	HCRDITL0LEN	0x2d
+#define	HCRDITL1LEN	0x2e
+#define	HCITLPORT	0x40
+#define	HCATLPORT	0x41
+
+/* Philips transfer descriptor */
+struct ptd {
+	u16 count;
+#define	PTD_COUNT_MSK	(0x3ff << 0)
+#define	PTD_TOGGLE_MSK	(1 << 10)
+#define	PTD_ACTIVE_MSK	(1 << 11)
+#define	PTD_CC_MSK	(0xf << 12)
+	u16 mps;
+#define	PTD_MPS_MSK	(0x3ff << 0)
+#define	PTD_SPD_MSK	(1 << 10)
+#define	PTD_LAST_MSK	(1 << 11)
+#define	PTD_EP_MSK	(0xf << 12)
+	u16 len;
+#define	PTD_LEN_MSK	(0x3ff << 0)
+#define	PTD_DIR_MSK	(3 << 10)
+#define	PTD_DIR_SETUP	(0)
+#define	PTD_DIR_OUT	(1)
+#define	PTD_DIR_IN	(2)
+#define	PTD_B5_5_MSK	(1 << 13)
+	u16 faddr;
+#define	PTD_FA_MSK	(0x7f << 0)
+#define	PTD_FMT_MSK	(1 << 7)
+} __attribute__ ((packed, aligned(2)));
+
+/* PTD accessor macros. */
+#define PTD_GET_COUNT(p)	(((p)->count & PTD_COUNT_MSK) >> 0)
+#define PTD_COUNT(v)		(((v) << 0) & PTD_COUNT_MSK)
+#define PTD_GET_TOGGLE(p)	(((p)->count & PTD_TOGGLE_MSK) >> 10)
+#define PTD_TOGGLE(v)		(((v) << 10) & PTD_TOGGLE_MSK)
+#define PTD_GET_ACTIVE(p)	(((p)->count & PTD_ACTIVE_MSK) >> 11)
+#define PTD_ACTIVE(v)		(((v) << 11) & PTD_ACTIVE_MSK)
+#define PTD_GET_CC(p)		(((p)->count & PTD_CC_MSK) >> 12)
+#define PTD_CC(v)		(((v) << 12) & PTD_CC_MSK)
+#define PTD_GET_MPS(p)		(((p)->mps & PTD_MPS_MSK) >> 0)
+#define PTD_MPS(v)		(((v) << 0) & PTD_MPS_MSK)
+#define PTD_GET_SPD(p)		(((p)->mps & PTD_SPD_MSK) >> 10)
+#define PTD_SPD(v)		(((v) << 10) & PTD_SPD_MSK)
+#define PTD_GET_LAST(p)		(((p)->mps & PTD_LAST_MSK) >> 11)
+#define PTD_LAST(v)		(((v) << 11) & PTD_LAST_MSK)
+#define PTD_GET_EP(p)		(((p)->mps & PTD_EP_MSK) >> 12)
+#define PTD_EP(v)		(((v) << 12) & PTD_EP_MSK)
+#define PTD_GET_LEN(p)		(((p)->len & PTD_LEN_MSK) >> 0)
+#define PTD_LEN(v)		(((v) << 0) & PTD_LEN_MSK)
+#define PTD_GET_DIR(p)		(((p)->len & PTD_DIR_MSK) >> 10)
+#define PTD_DIR(v)		(((v) << 10) & PTD_DIR_MSK)
+#define PTD_GET_B5_5(p)		(((p)->len & PTD_B5_5_MSK) >> 13)
+#define PTD_B5_5(v)		(((v) << 13) & PTD_B5_5_MSK)
+#define PTD_GET_FA(p)		(((p)->faddr & PTD_FA_MSK) >> 0)
+#define PTD_FA(v)		(((v) << 0) & PTD_FA_MSK)
+#define PTD_GET_FMT(p)		(((p)->faddr & PTD_FMT_MSK) >> 7)
+#define PTD_FMT(v)		(((v) << 7) & PTD_FMT_MSK)
+
+/*  Hardware transfer status codes -- CC from ptd->count */
+#define TD_CC_NOERROR      0x00
+#define TD_CC_CRC          0x01
+#define TD_CC_BITSTUFFING  0x02
+#define TD_CC_DATATOGGLEM  0x03
+#define TD_CC_STALL        0x04
+#define TD_DEVNOTRESP      0x05
+#define TD_PIDCHECKFAIL    0x06
+#define TD_UNEXPECTEDPID   0x07
+#define TD_DATAOVERRUN     0x08
+#define TD_DATAUNDERRUN    0x09
+    /* 0x0A, 0x0B reserved for hardware */
+#define TD_BUFFEROVERRUN   0x0C
+#define TD_BUFFERUNDERRUN  0x0D
+    /* 0x0E, 0x0F reserved for HCD */
+#define TD_NOTACCESSED     0x0F
+
+/* map PTD status codes (CC) to errno values */
+static const int cc_to_error[16] = {
+	/* No  Error  */ 0,
+	/* CRC Error  */ -EILSEQ,
+	/* Bit Stuff  */ -EPROTO,
+	/* Data Togg  */ -EILSEQ,
+	/* Stall      */ -EPIPE,
+	/* DevNotResp */ -ETIME,
+	/* PIDCheck   */ -EPROTO,
+	/* UnExpPID   */ -EPROTO,
+	/* DataOver   */ -EOVERFLOW,
+	/* DataUnder  */ -EREMOTEIO,
+	/* (for hw)   */ -EIO,
+	/* (for hw)   */ -EIO,
+	/* BufferOver */ -ECOMM,
+	/* BuffUnder  */ -ENOSR,
+	/* (for HCD)  */ -EALREADY,
+	/* (for HCD)  */ -EALREADY
+};
+
+/*--------------------------------------------------------------*/
+
+#define	LOG2_PERIODIC_SIZE	5	/* arbitrary; this matches OHCI */
+#define	PERIODIC_SIZE		(1 << LOG2_PERIODIC_SIZE)
+
+struct isp116x {
+	spinlock_t lock;
+
+	void __iomem *addr_reg;
+	void __iomem *data_reg;
+
+	struct isp116x_platform_data *board;
+
+	unsigned long stat1, stat2, stat4, stat8, stat16;
+
+	/* HC registers */
+	u32 intenb;		/* "OHCI" interrupts */
+	u16 irqenb;		/* uP interrupts */
+
+	/* Root hub registers */
+	u32 rhdesca;
+	u32 rhdescb;
+	u32 rhstatus;
+
+	/* async schedule: control, bulk */
+	struct list_head async;
+
+	/* periodic schedule: int */
+	u16 load[PERIODIC_SIZE];
+	struct isp116x_ep *periodic[PERIODIC_SIZE];
+	unsigned periodic_count;
+	u16 fmindex;
+
+	/* Schedule for the current frame */
+	struct isp116x_ep *atl_active;
+	int atl_buflen;
+	int atl_bufshrt;
+	int atl_last_dir;
+	atomic_t atl_finishing;
+};
+
+static inline struct isp116x *hcd_to_isp116x(struct usb_hcd *hcd)
+{
+	return (struct isp116x *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *isp116x_to_hcd(struct isp116x *isp116x)
+{
+	return container_of((void *)isp116x, struct usb_hcd, hcd_priv);
+}
+
+struct isp116x_ep {
+	struct usb_host_endpoint *hep;
+	struct usb_device *udev;
+	struct ptd ptd;
+
+	u8 maxpacket;
+	u8 epnum;
+	u8 nextpid;
+	u16 error_count;
+	u16 length;		/* of current packet */
+	unsigned char *data;	/* to databuf */
+	/* queue of active EP's (the ones scheduled for the
+	   current frame) */
+	struct isp116x_ep *active;
+
+	/* periodic schedule */
+	u16 period;
+	u16 branch;
+	u16 load;
+	struct isp116x_ep *next;
+
+	/* async schedule */
+	struct list_head schedule;
+};
+
+/*-------------------------------------------------------------------------*/
+
+#define DBG(stuff...)		pr_debug("116x: " stuff)
+
+#ifdef VERBOSE
+#    define VDBG		DBG
+#else
+#    define VDBG(stuff...)	do{}while(0)
+#endif
+
+#define ERR(stuff...)		printk(KERN_ERR "116x: " stuff)
+#define WARNING(stuff...)	printk(KERN_WARNING "116x: " stuff)
+#define INFO(stuff...)		printk(KERN_INFO "116x: " stuff)
+
+/* ------------------------------------------------- */
+
+#if defined(USE_PLATFORM_DELAY)
+#if defined(USE_NDELAY)
+#error USE_PLATFORM_DELAY and USE_NDELAY simultaneously defined.
+#endif
+#define	isp116x_delay(h,d)	(h)->board->delay(	\
+				isp116x_to_hcd(h)->self.controller,d)
+#define isp116x_check_platform_delay(h)	((h)->board->delay == NULL)
+#elif defined(USE_NDELAY)
+#define	isp116x_delay(h,d)	ndelay(d)
+#define isp116x_check_platform_delay(h)	0
+#else
+#define	isp116x_delay(h,d)	do{}while(0)
+#define isp116x_check_platform_delay(h)	0
+#endif
+
+static inline void isp116x_write_addr(struct isp116x *isp116x, unsigned reg)
+{
+	writew(reg & 0xff, isp116x->addr_reg);
+	isp116x_delay(isp116x, 300);
+}
+
+static inline void isp116x_write_data16(struct isp116x *isp116x, u16 val)
+{
+	writew(val, isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+}
+
+static inline void isp116x_raw_write_data16(struct isp116x *isp116x, u16 val)
+{
+	__raw_writew(val, isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+}
+
+static inline u16 isp116x_read_data16(struct isp116x *isp116x)
+{
+	u16 val;
+
+	val = readw(isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+	return val;
+}
+
+static inline u16 isp116x_raw_read_data16(struct isp116x *isp116x)
+{
+	u16 val;
+
+	val = __raw_readw(isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+	return val;
+}
+
+static inline void isp116x_write_data32(struct isp116x *isp116x, u32 val)
+{
+	writew(val & 0xffff, isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+	writew(val >> 16, isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+}
+
+static inline u32 isp116x_read_data32(struct isp116x *isp116x)
+{
+	u32 val;
+
+	val = (u32) readw(isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+	val |= ((u32) readw(isp116x->data_reg)) << 16;
+	isp116x_delay(isp116x, 150);
+	return val;
+}
+
+/* Let's keep register access functions out of line. Hint:
+   we wait at least 150 ns at every access.
+*/
+static u16 isp116x_read_reg16(struct isp116x *isp116x, unsigned reg)
+{
+	isp116x_write_addr(isp116x, reg);
+	return isp116x_read_data16(isp116x);
+}
+
+static u32 isp116x_read_reg32(struct isp116x *isp116x, unsigned reg)
+{
+	isp116x_write_addr(isp116x, reg);
+	return isp116x_read_data32(isp116x);
+}
+
+static void isp116x_write_reg16(struct isp116x *isp116x, unsigned reg,
+				unsigned val)
+{
+	isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET);
+	isp116x_write_data16(isp116x, (u16) (val & 0xffff));
+}
+
+static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg,
+				unsigned val)
+{
+	isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET);
+	isp116x_write_data32(isp116x, (u32) val);
+}
+
+#define isp116x_show_reg_log(d,r,s) {				\
+	if ((r) < 0x20) {			                \
+		DBG("%-12s[%02x]: %08x\n", #r,			\
+			r, isp116x_read_reg32(d, r));		\
+	} else {						\
+		DBG("%-12s[%02x]:     %04x\n", #r,		\
+			r, isp116x_read_reg16(d, r));	    	\
+	}							\
+}
+#define isp116x_show_reg_seq(d,r,s) {				\
+	if ((r) < 0x20) {					\
+		seq_printf(s, "%-12s[%02x]: %08x\n", #r,	\
+			r, isp116x_read_reg32(d, r));		\
+	} else {						\
+		seq_printf(s, "%-12s[%02x]:     %04x\n", #r,	\
+			r, isp116x_read_reg16(d, r));		\
+	}							\
+}
+
+#define isp116x_show_regs(d,type,s) {			\
+	isp116x_show_reg_##type(d, HCREVISION, s);	\
+	isp116x_show_reg_##type(d, HCCONTROL, s);	\
+	isp116x_show_reg_##type(d, HCCMDSTAT, s);	\
+	isp116x_show_reg_##type(d, HCINTSTAT, s);	\
+	isp116x_show_reg_##type(d, HCINTENB, s);	\
+	isp116x_show_reg_##type(d, HCFMINTVL, s);	\
+	isp116x_show_reg_##type(d, HCFMREM, s);		\
+	isp116x_show_reg_##type(d, HCFMNUM, s);		\
+	isp116x_show_reg_##type(d, HCLSTHRESH, s);	\
+	isp116x_show_reg_##type(d, HCRHDESCA, s);	\
+	isp116x_show_reg_##type(d, HCRHDESCB, s);	\
+	isp116x_show_reg_##type(d, HCRHSTATUS, s);	\
+	isp116x_show_reg_##type(d, HCRHPORT1, s);	\
+	isp116x_show_reg_##type(d, HCRHPORT2, s);	\
+	isp116x_show_reg_##type(d, HCHWCFG, s);		\
+	isp116x_show_reg_##type(d, HCDMACFG, s);	\
+	isp116x_show_reg_##type(d, HCXFERCTR, s);	\
+	isp116x_show_reg_##type(d, HCuPINT, s);		\
+	isp116x_show_reg_##type(d, HCuPINTENB, s);	\
+	isp116x_show_reg_##type(d, HCCHIPID, s);	\
+	isp116x_show_reg_##type(d, HCSCRATCH, s);	\
+	isp116x_show_reg_##type(d, HCITLBUFLEN, s);	\
+	isp116x_show_reg_##type(d, HCATLBUFLEN, s);	\
+	isp116x_show_reg_##type(d, HCBUFSTAT, s);	\
+	isp116x_show_reg_##type(d, HCRDITL0LEN, s);	\
+	isp116x_show_reg_##type(d, HCRDITL1LEN, s);	\
+}
+
+/*
+   Dump registers for debugfs.
+*/
+static inline void isp116x_show_regs_seq(struct isp116x *isp116x,
+					  struct seq_file *s)
+{
+	isp116x_show_regs(isp116x, seq, s);
+}
+
+/*
+   Dump registers to syslog.
+*/
+static inline void isp116x_show_regs_log(struct isp116x *isp116x)
+{
+	isp116x_show_regs(isp116x, log, NULL);
+}
+
+#if defined(URB_TRACE)
+
+#define PIPETYPE(pipe)  ({ char *__s;			\
+	if (usb_pipecontrol(pipe))	__s = "ctrl";	\
+	else if (usb_pipeint(pipe))	__s = "int";	\
+	else if (usb_pipebulk(pipe))	__s = "bulk";	\
+	else				__s = "iso";	\
+	__s;})
+#define PIPEDIR(pipe)   ({ usb_pipein(pipe) ? "in" : "out"; })
+#define URB_NOTSHORT(urb) ({ (urb)->transfer_flags & URB_SHORT_NOT_OK ? \
+	"short_not_ok" : ""; })
+
+/* print debug info about the URB */
+static void urb_dbg(struct urb *urb, char *msg)
+{
+	unsigned int pipe;
+
+	if (!urb) {
+		DBG("%s: zero urb\n", msg);
+		return;
+	}
+	pipe = urb->pipe;
+	DBG("%s: FA %d ep%d%s %s: len %d/%d %s\n", msg,
+	    usb_pipedevice(pipe), usb_pipeendpoint(pipe),
+	    PIPEDIR(pipe), PIPETYPE(pipe),
+	    urb->transfer_buffer_length, urb->actual_length, URB_NOTSHORT(urb));
+}
+
+#else
+
+#define  urb_dbg(urb,msg)   do{}while(0)
+
+#endif				/* ! defined(URB_TRACE) */
+
+#if defined(PTD_TRACE)
+
+#define PTD_DIR_STR(ptd)  ({char __c;		\
+	switch(PTD_GET_DIR(ptd)){		\
+	case 0:  __c = 's'; break;		\
+	case 1:  __c = 'o'; break;		\
+	default: __c = 'i'; break;		\
+	}; __c;})
+
+/*
+  Dump PTD info. The code documents the format
+  perfectly, right :)
+*/
+static inline void dump_ptd(struct ptd *ptd)
+{
+	printk(KERN_WARNING "td: %x %d%c%d %d,%d,%d  %x %x%x%x\n",
+	       PTD_GET_CC(ptd), PTD_GET_FA(ptd),
+	       PTD_DIR_STR(ptd), PTD_GET_EP(ptd),
+	       PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd),
+	       PTD_GET_TOGGLE(ptd), PTD_GET_ACTIVE(ptd),
+	       PTD_GET_SPD(ptd), PTD_GET_LAST(ptd));
+}
+
+static inline void dump_ptd_out_data(struct ptd *ptd, u8 * buf)
+{
+	int k;
+
+	if (PTD_GET_DIR(ptd) != PTD_DIR_IN && PTD_GET_LEN(ptd)) {
+		printk(KERN_WARNING "-> ");
+		for (k = 0; k < PTD_GET_LEN(ptd); ++k)
+			printk("%02x ", ((u8 *) buf)[k]);
+		printk("\n");
+	}
+}
+
+static inline void dump_ptd_in_data(struct ptd *ptd, u8 * buf)
+{
+	int k;
+
+	if (PTD_GET_DIR(ptd) == PTD_DIR_IN && PTD_GET_COUNT(ptd)) {
+		printk(KERN_WARNING "<- ");
+		for (k = 0; k < PTD_GET_COUNT(ptd); ++k)
+			printk("%02x ", ((u8 *) buf)[k]);
+		printk("\n");
+	}
+	if (PTD_GET_LAST(ptd))
+		printk(KERN_WARNING "-\n");
+}
+
+#else
+
+#define dump_ptd(ptd)               do{}while(0)
+#define dump_ptd_in_data(ptd,buf)   do{}while(0)
+#define dump_ptd_out_data(ptd,buf)  do{}while(0)
+
+#endif				/* ! defined(PTD_TRACE) */
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
new file mode 100644
index 000000000..b0da143ef
--- /dev/null
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -0,0 +1,2772 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ISP1362 HCD (Host Controller Driver) for USB.
+ *
+ * Copyright (C) 2005 Lothar Wassmann <LW@KARO-electronics.de>
+ *
+ * Derived from the SL811 HCD, rewritten for ISP116x.
+ * Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee>
+ *
+ * Portions:
+ * Copyright (C) 2004 Psion Teklogix (for NetBook PRO)
+ * Copyright (C) 2004 David Brownell
+ */
+
+/*
+ * The ISP1362 chip requires a large delay (300ns and 462ns) between
+ * accesses to the address and data register.
+ * The following timing options exist:
+ *
+ * 1. Configure your memory controller to add such delays if it can (the best)
+ * 2. Implement platform-specific delay function possibly
+ *    combined with configuring the memory controller; see
+ *    include/linux/usb_isp1362.h for more info.
+ * 3. Use ndelay (easiest, poorest).
+ *
+ * Use the corresponding macros USE_PLATFORM_DELAY and USE_NDELAY in the
+ * platform specific section of isp1362.h to select the appropriate variant.
+ *
+ * Also note that according to the Philips "ISP1362 Errata" document
+ * Rev 1.00 from 27 May data corruption may occur when the #WR signal
+ * is reasserted (even with #CS deasserted) within 132ns after a
+ * write cycle to any controller register. If the hardware doesn't
+ * implement the recommended fix (gating the #WR with #CS) software
+ * must ensure that no further write cycle (not necessarily to the chip!)
+ * is issued by the CPU within this interval.
+
+ * For PXA25x this can be ensured by using VLIO with the maximum
+ * recovery time (MSCx = 0x7f8c) with a memory clock of 99.53 MHz.
+ */
+
+#undef ISP1362_DEBUG
+
+/*
+ * The PXA255 UDC apparently doesn't handle GET_STATUS, GET_CONFIG and
+ * GET_INTERFACE requests correctly when the SETUP and DATA stages of the
+ * requests are carried out in separate frames. This will delay any SETUP
+ * packets until the start of the next frame so that this situation is
+ * unlikely to occur (and makes usbtest happy running with a PXA255 target
+ * device).
+ */
+#undef BUGGY_PXA2XX_UDC_USBTEST
+
+#undef PTD_TRACE
+#undef URB_TRACE
+#undef VERBOSE
+#undef REGISTERS
+
+/* This enables a memory test on the ISP1362 chip memory to make sure the
+ * chip access timing is correct.
+ */
+#undef CHIP_BUFFER_TEST
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/usb/isp1362.h>
+#include <linux/usb/hcd.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/bitmap.h>
+#include <linux/prefetch.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+static int dbg_level;
+#ifdef ISP1362_DEBUG
+module_param(dbg_level, int, 0644);
+#else
+module_param(dbg_level, int, 0);
+#endif
+
+#include "../core/usb.h"
+#include "isp1362.h"
+
+
+#define DRIVER_VERSION	"2005-04-04"
+#define DRIVER_DESC	"ISP1362 USB Host Controller Driver"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static const char hcd_name[] = "isp1362-hcd";
+
+static void isp1362_hc_stop(struct usb_hcd *hcd);
+static int isp1362_hc_start(struct usb_hcd *hcd);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * When called from the interrupthandler only isp1362_hcd->irqenb is modified,
+ * since the interrupt handler will write isp1362_hcd->irqenb to HCuPINT upon
+ * completion.
+ * We don't need a 'disable' counterpart, since interrupts will be disabled
+ * only by the interrupt handler.
+ */
+static inline void isp1362_enable_int(struct isp1362_hcd *isp1362_hcd, u16 mask)
+{
+	if ((isp1362_hcd->irqenb | mask) == isp1362_hcd->irqenb)
+		return;
+	if (mask & ~isp1362_hcd->irqenb)
+		isp1362_write_reg16(isp1362_hcd, HCuPINT, mask & ~isp1362_hcd->irqenb);
+	isp1362_hcd->irqenb |= mask;
+	if (isp1362_hcd->irq_active)
+		return;
+	isp1362_write_reg16(isp1362_hcd, HCuPINTENB, isp1362_hcd->irqenb);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline struct isp1362_ep_queue *get_ptd_queue(struct isp1362_hcd *isp1362_hcd,
+						     u16 offset)
+{
+	struct isp1362_ep_queue *epq = NULL;
+
+	if (offset < isp1362_hcd->istl_queue[1].buf_start)
+		epq = &isp1362_hcd->istl_queue[0];
+	else if (offset < isp1362_hcd->intl_queue.buf_start)
+		epq = &isp1362_hcd->istl_queue[1];
+	else if (offset < isp1362_hcd->atl_queue.buf_start)
+		epq = &isp1362_hcd->intl_queue;
+	else if (offset < isp1362_hcd->atl_queue.buf_start +
+		   isp1362_hcd->atl_queue.buf_size)
+		epq = &isp1362_hcd->atl_queue;
+
+	if (epq)
+		DBG(1, "%s: PTD $%04x is on %s queue\n", __func__, offset, epq->name);
+	else
+		pr_warn("%s: invalid PTD $%04x\n", __func__, offset);
+
+	return epq;
+}
+
+static inline int get_ptd_offset(struct isp1362_ep_queue *epq, u8 index)
+{
+	int offset;
+
+	if (index * epq->blk_size > epq->buf_size) {
+		pr_warn("%s: Bad %s index %d(%d)\n",
+			__func__, epq->name, index,
+			epq->buf_size / epq->blk_size);
+		return -EINVAL;
+	}
+	offset = epq->buf_start + index * epq->blk_size;
+	DBG(3, "%s: %s PTD[%02x] # %04x\n", __func__, epq->name, index, offset);
+
+	return offset;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline u16 max_transfer_size(struct isp1362_ep_queue *epq, size_t size,
+				    int mps)
+{
+	u16 xfer_size = min_t(size_t, MAX_XFER_SIZE, size);
+
+	xfer_size = min_t(size_t, xfer_size, epq->buf_avail * epq->blk_size - PTD_HEADER_SIZE);
+	if (xfer_size < size && xfer_size % mps)
+		xfer_size -= xfer_size % mps;
+
+	return xfer_size;
+}
+
+static int claim_ptd_buffers(struct isp1362_ep_queue *epq,
+			     struct isp1362_ep *ep, u16 len)
+{
+	int ptd_offset = -EINVAL;
+	int num_ptds = ((len + PTD_HEADER_SIZE - 1) / epq->blk_size) + 1;
+	int found;
+
+	BUG_ON(len > epq->buf_size);
+
+	if (!epq->buf_avail)
+		return -ENOMEM;
+
+	if (ep->num_ptds)
+		pr_err("%s: %s len %d/%d num_ptds %d buf_map %08lx skip_map %08lx\n", __func__,
+		    epq->name, len, epq->blk_size, num_ptds, epq->buf_map, epq->skip_map);
+	BUG_ON(ep->num_ptds != 0);
+
+	found = bitmap_find_next_zero_area(&epq->buf_map, epq->buf_count, 0,
+						num_ptds, 0);
+	if (found >= epq->buf_count)
+		return -EOVERFLOW;
+
+	DBG(1, "%s: Found %d PTDs[%d] for %d/%d byte\n", __func__,
+	    num_ptds, found, len, (int)(epq->blk_size - PTD_HEADER_SIZE));
+	ptd_offset = get_ptd_offset(epq, found);
+	WARN_ON(ptd_offset < 0);
+	ep->ptd_offset = ptd_offset;
+	ep->num_ptds += num_ptds;
+	epq->buf_avail -= num_ptds;
+	BUG_ON(epq->buf_avail > epq->buf_count);
+	ep->ptd_index = found;
+	bitmap_set(&epq->buf_map, found, num_ptds);
+	DBG(1, "%s: Done %s PTD[%d] $%04x, avail %d count %d claimed %d %08lx:%08lx\n",
+	    __func__, epq->name, ep->ptd_index, ep->ptd_offset,
+	    epq->buf_avail, epq->buf_count, num_ptds, epq->buf_map, epq->skip_map);
+
+	return found;
+}
+
+static inline void release_ptd_buffers(struct isp1362_ep_queue *epq, struct isp1362_ep *ep)
+{
+	int last = ep->ptd_index + ep->num_ptds;
+
+	if (last > epq->buf_count)
+		pr_err("%s: ep %p req %d len %d %s PTD[%d] $%04x num_ptds %d buf_count %d buf_avail %d buf_map %08lx skip_map %08lx\n",
+		    __func__, ep, ep->num_req, ep->length, epq->name, ep->ptd_index,
+		    ep->ptd_offset, ep->num_ptds, epq->buf_count, epq->buf_avail,
+		    epq->buf_map, epq->skip_map);
+	BUG_ON(last > epq->buf_count);
+
+	bitmap_clear(&epq->buf_map, ep->ptd_index, ep->num_ptds);
+	bitmap_set(&epq->skip_map, ep->ptd_index, ep->num_ptds);
+	epq->buf_avail += ep->num_ptds;
+	epq->ptd_count--;
+
+	BUG_ON(epq->buf_avail > epq->buf_count);
+	BUG_ON(epq->ptd_count > epq->buf_count);
+
+	DBG(1, "%s: Done %s PTDs $%04x released %d avail %d count %d\n",
+	    __func__, epq->name,
+	    ep->ptd_offset, ep->num_ptds, epq->buf_avail, epq->buf_count);
+	DBG(1, "%s: buf_map %08lx skip_map %08lx\n", __func__,
+	    epq->buf_map, epq->skip_map);
+
+	ep->num_ptds = 0;
+	ep->ptd_offset = -EINVAL;
+	ep->ptd_index = -EINVAL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+  Set up PTD's.
+*/
+static void prepare_ptd(struct isp1362_hcd *isp1362_hcd, struct urb *urb,
+			struct isp1362_ep *ep, struct isp1362_ep_queue *epq,
+			u16 fno)
+{
+	struct ptd *ptd;
+	int toggle;
+	int dir;
+	u16 len;
+	size_t buf_len = urb->transfer_buffer_length - urb->actual_length;
+
+	DBG(3, "%s: %s ep %p\n", __func__, epq->name, ep);
+
+	ptd = &ep->ptd;
+
+	ep->data = (unsigned char *)urb->transfer_buffer + urb->actual_length;
+
+	switch (ep->nextpid) {
+	case USB_PID_IN:
+		toggle = usb_gettoggle(urb->dev, ep->epnum, 0);
+		dir = PTD_DIR_IN;
+		if (usb_pipecontrol(urb->pipe)) {
+			len = min_t(size_t, ep->maxpacket, buf_len);
+		} else if (usb_pipeisoc(urb->pipe)) {
+			len = min_t(size_t, urb->iso_frame_desc[fno].length, MAX_XFER_SIZE);
+			ep->data = urb->transfer_buffer + urb->iso_frame_desc[fno].offset;
+		} else
+			len = max_transfer_size(epq, buf_len, ep->maxpacket);
+		DBG(1, "%s: IN    len %d/%d/%d from URB\n", __func__, len, ep->maxpacket,
+		    (int)buf_len);
+		break;
+	case USB_PID_OUT:
+		toggle = usb_gettoggle(urb->dev, ep->epnum, 1);
+		dir = PTD_DIR_OUT;
+		if (usb_pipecontrol(urb->pipe))
+			len = min_t(size_t, ep->maxpacket, buf_len);
+		else if (usb_pipeisoc(urb->pipe))
+			len = min_t(size_t, urb->iso_frame_desc[0].length, MAX_XFER_SIZE);
+		else
+			len = max_transfer_size(epq, buf_len, ep->maxpacket);
+		if (len == 0)
+			pr_info("%s: Sending ZERO packet: %d\n", __func__,
+			     urb->transfer_flags & URB_ZERO_PACKET);
+		DBG(1, "%s: OUT   len %d/%d/%d from URB\n", __func__, len, ep->maxpacket,
+		    (int)buf_len);
+		break;
+	case USB_PID_SETUP:
+		toggle = 0;
+		dir = PTD_DIR_SETUP;
+		len = sizeof(struct usb_ctrlrequest);
+		DBG(1, "%s: SETUP len %d\n", __func__, len);
+		ep->data = urb->setup_packet;
+		break;
+	case USB_PID_ACK:
+		toggle = 1;
+		len = 0;
+		dir = (urb->transfer_buffer_length && usb_pipein(urb->pipe)) ?
+			PTD_DIR_OUT : PTD_DIR_IN;
+		DBG(1, "%s: ACK   len %d\n", __func__, len);
+		break;
+	default:
+		toggle = dir = len = 0;
+		pr_err("%s@%d: ep->nextpid %02x\n", __func__, __LINE__, ep->nextpid);
+		BUG_ON(1);
+	}
+
+	ep->length = len;
+	if (!len)
+		ep->data = NULL;
+
+	ptd->count = PTD_CC_MSK | PTD_ACTIVE_MSK | PTD_TOGGLE(toggle);
+	ptd->mps = PTD_MPS(ep->maxpacket) | PTD_SPD(urb->dev->speed == USB_SPEED_LOW) |
+		PTD_EP(ep->epnum);
+	ptd->len = PTD_LEN(len) | PTD_DIR(dir);
+	ptd->faddr = PTD_FA(usb_pipedevice(urb->pipe));
+
+	if (usb_pipeint(urb->pipe)) {
+		ptd->faddr |= PTD_SF_INT(ep->branch);
+		ptd->faddr |= PTD_PR(ep->interval ? __ffs(ep->interval) : 0);
+	}
+	if (usb_pipeisoc(urb->pipe))
+		ptd->faddr |= PTD_SF_ISO(fno);
+
+	DBG(1, "%s: Finished\n", __func__);
+}
+
+static void isp1362_write_ptd(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep,
+			      struct isp1362_ep_queue *epq)
+{
+	struct ptd *ptd = &ep->ptd;
+	int len = PTD_GET_DIR(ptd) == PTD_DIR_IN ? 0 : ep->length;
+
+	prefetch(ptd);
+	isp1362_write_buffer(isp1362_hcd, ptd, ep->ptd_offset, PTD_HEADER_SIZE);
+	if (len)
+		isp1362_write_buffer(isp1362_hcd, ep->data,
+				     ep->ptd_offset + PTD_HEADER_SIZE, len);
+
+	dump_ptd(ptd);
+	dump_ptd_out_data(ptd, ep->data);
+}
+
+static void isp1362_read_ptd(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep,
+			     struct isp1362_ep_queue *epq)
+{
+	struct ptd *ptd = &ep->ptd;
+	int act_len;
+
+	WARN_ON(list_empty(&ep->active));
+	BUG_ON(ep->ptd_offset < 0);
+
+	list_del_init(&ep->active);
+	DBG(1, "%s: ep %p removed from active list %p\n", __func__, ep, &epq->active);
+
+	prefetchw(ptd);
+	isp1362_read_buffer(isp1362_hcd, ptd, ep->ptd_offset, PTD_HEADER_SIZE);
+	dump_ptd(ptd);
+	act_len = PTD_GET_COUNT(ptd);
+	if (PTD_GET_DIR(ptd) != PTD_DIR_IN || act_len == 0)
+		return;
+	if (act_len > ep->length)
+		pr_err("%s: ep %p PTD $%04x act_len %d ep->length %d\n", __func__, ep,
+			 ep->ptd_offset, act_len, ep->length);
+	BUG_ON(act_len > ep->length);
+	/* Only transfer the amount of data that has actually been overwritten
+	 * in the chip buffer. We don't want any data that doesn't belong to the
+	 * transfer to leak out of the chip to the callers transfer buffer!
+	 */
+	prefetchw(ep->data);
+	isp1362_read_buffer(isp1362_hcd, ep->data,
+			    ep->ptd_offset + PTD_HEADER_SIZE, act_len);
+	dump_ptd_in_data(ptd, ep->data);
+}
+
+/*
+ * INT PTDs will stay in the chip until data is available.
+ * This function will remove a PTD from the chip when the URB is dequeued.
+ * Must be called with the spinlock held and IRQs disabled
+ */
+static void remove_ptd(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep)
+
+{
+	int index;
+	struct isp1362_ep_queue *epq;
+
+	DBG(1, "%s: ep %p PTD[%d] $%04x\n", __func__, ep, ep->ptd_index, ep->ptd_offset);
+	BUG_ON(ep->ptd_offset < 0);
+
+	epq = get_ptd_queue(isp1362_hcd, ep->ptd_offset);
+	BUG_ON(!epq);
+
+	/* put ep in remove_list for cleanup */
+	WARN_ON(!list_empty(&ep->remove_list));
+	list_add_tail(&ep->remove_list, &isp1362_hcd->remove_list);
+	/* let SOF interrupt handle the cleanup */
+	isp1362_enable_int(isp1362_hcd, HCuPINT_SOF);
+
+	index = ep->ptd_index;
+	if (index < 0)
+		/* ISO queues don't have SKIP registers */
+		return;
+
+	DBG(1, "%s: Disabling PTD[%02x] $%04x %08lx|%08x\n", __func__,
+	    index, ep->ptd_offset, epq->skip_map, 1 << index);
+
+	/* prevent further processing of PTD (will be effective after next SOF) */
+	epq->skip_map |= 1 << index;
+	if (epq == &isp1362_hcd->atl_queue) {
+		DBG(2, "%s: ATLSKIP = %08x -> %08lx\n", __func__,
+		    isp1362_read_reg32(isp1362_hcd, HCATLSKIP), epq->skip_map);
+		isp1362_write_reg32(isp1362_hcd, HCATLSKIP, epq->skip_map);
+		if (~epq->skip_map == 0)
+			isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ATL_ACTIVE);
+	} else if (epq == &isp1362_hcd->intl_queue) {
+		DBG(2, "%s: INTLSKIP = %08x -> %08lx\n", __func__,
+		    isp1362_read_reg32(isp1362_hcd, HCINTLSKIP), epq->skip_map);
+		isp1362_write_reg32(isp1362_hcd, HCINTLSKIP, epq->skip_map);
+		if (~epq->skip_map == 0)
+			isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_INTL_ACTIVE);
+	}
+}
+
+/*
+  Take done or failed requests out of schedule. Give back
+  processed urbs.
+*/
+static void finish_request(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep,
+			   struct urb *urb, int status)
+     __releases(isp1362_hcd->lock)
+     __acquires(isp1362_hcd->lock)
+{
+	urb->hcpriv = NULL;
+	ep->error_count = 0;
+
+	if (usb_pipecontrol(urb->pipe))
+		ep->nextpid = USB_PID_SETUP;
+
+	URB_DBG("%s: req %d FA %d ep%d%s %s: len %d/%d %s stat %d\n", __func__,
+		ep->num_req, usb_pipedevice(urb->pipe),
+		usb_pipeendpoint(urb->pipe),
+		!usb_pipein(urb->pipe) ? "out" : "in",
+		usb_pipecontrol(urb->pipe) ? "ctrl" :
+			usb_pipeint(urb->pipe) ? "int" :
+			usb_pipebulk(urb->pipe) ? "bulk" :
+			"iso",
+		urb->actual_length, urb->transfer_buffer_length,
+		!(urb->transfer_flags & URB_SHORT_NOT_OK) ?
+		"short_ok" : "", urb->status);
+
+
+	usb_hcd_unlink_urb_from_ep(isp1362_hcd_to_hcd(isp1362_hcd), urb);
+	spin_unlock(&isp1362_hcd->lock);
+	usb_hcd_giveback_urb(isp1362_hcd_to_hcd(isp1362_hcd), urb, status);
+	spin_lock(&isp1362_hcd->lock);
+
+	/* take idle endpoints out of the schedule right away */
+	if (!list_empty(&ep->hep->urb_list))
+		return;
+
+	/* async deschedule */
+	if (!list_empty(&ep->schedule)) {
+		list_del_init(&ep->schedule);
+		return;
+	}
+
+
+	if (ep->interval) {
+		/* periodic deschedule */
+		DBG(1, "deschedule qh%d/%p branch %d load %d bandwidth %d -> %d\n", ep->interval,
+		    ep, ep->branch, ep->load,
+		    isp1362_hcd->load[ep->branch],
+		    isp1362_hcd->load[ep->branch] - ep->load);
+		isp1362_hcd->load[ep->branch] -= ep->load;
+		ep->branch = PERIODIC_SIZE;
+	}
+}
+
+/*
+ * Analyze transfer results, handle partial transfers and errors
+*/
+static void postproc_ep(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep)
+{
+	struct urb *urb = get_urb(ep);
+	struct usb_device *udev;
+	struct ptd *ptd;
+	int short_ok;
+	u16 len;
+	int urbstat = -EINPROGRESS;
+	u8 cc;
+
+	DBG(2, "%s: ep %p req %d\n", __func__, ep, ep->num_req);
+
+	udev = urb->dev;
+	ptd = &ep->ptd;
+	cc = PTD_GET_CC(ptd);
+	if (cc == PTD_NOTACCESSED) {
+		pr_err("%s: req %d PTD %p Untouched by ISP1362\n", __func__,
+		    ep->num_req, ptd);
+		cc = PTD_DEVNOTRESP;
+	}
+
+	short_ok = !(urb->transfer_flags & URB_SHORT_NOT_OK);
+	len = urb->transfer_buffer_length - urb->actual_length;
+
+	/* Data underrun is special. For allowed underrun
+	   we clear the error and continue as normal. For
+	   forbidden underrun we finish the DATA stage
+	   immediately while for control transfer,
+	   we do a STATUS stage.
+	*/
+	if (cc == PTD_DATAUNDERRUN) {
+		if (short_ok) {
+			DBG(1, "%s: req %d Allowed data underrun short_%sok %d/%d/%d byte\n",
+			    __func__, ep->num_req, short_ok ? "" : "not_",
+			    PTD_GET_COUNT(ptd), ep->maxpacket, len);
+			cc = PTD_CC_NOERROR;
+			urbstat = 0;
+		} else {
+			DBG(1, "%s: req %d Data Underrun %s nextpid %02x short_%sok %d/%d/%d byte\n",
+			    __func__, ep->num_req,
+			    usb_pipein(urb->pipe) ? "IN" : "OUT", ep->nextpid,
+			    short_ok ? "" : "not_",
+			    PTD_GET_COUNT(ptd), ep->maxpacket, len);
+			/* save the data underrun error code for later and
+			 * proceed with the status stage
+			 */
+			urb->actual_length += PTD_GET_COUNT(ptd);
+			if (usb_pipecontrol(urb->pipe)) {
+				ep->nextpid = USB_PID_ACK;
+				BUG_ON(urb->actual_length > urb->transfer_buffer_length);
+
+				if (urb->status == -EINPROGRESS)
+					urb->status = cc_to_error[PTD_DATAUNDERRUN];
+			} else {
+				usb_settoggle(udev, ep->epnum, ep->nextpid == USB_PID_OUT,
+					      PTD_GET_TOGGLE(ptd));
+				urbstat = cc_to_error[PTD_DATAUNDERRUN];
+			}
+			goto out;
+		}
+	}
+
+	if (cc != PTD_CC_NOERROR) {
+		if (++ep->error_count >= 3 || cc == PTD_CC_STALL || cc == PTD_DATAOVERRUN) {
+			urbstat = cc_to_error[cc];
+			DBG(1, "%s: req %d nextpid %02x, status %d, error %d, error_count %d\n",
+			    __func__, ep->num_req, ep->nextpid, urbstat, cc,
+			    ep->error_count);
+		}
+		goto out;
+	}
+
+	switch (ep->nextpid) {
+	case USB_PID_OUT:
+		if (PTD_GET_COUNT(ptd) != ep->length)
+			pr_err("%s: count=%d len=%d\n", __func__,
+			   PTD_GET_COUNT(ptd), ep->length);
+		BUG_ON(PTD_GET_COUNT(ptd) != ep->length);
+		urb->actual_length += ep->length;
+		BUG_ON(urb->actual_length > urb->transfer_buffer_length);
+		usb_settoggle(udev, ep->epnum, 1, PTD_GET_TOGGLE(ptd));
+		if (urb->actual_length == urb->transfer_buffer_length) {
+			DBG(3, "%s: req %d xfer complete %d/%d status %d -> 0\n", __func__,
+			    ep->num_req, len, ep->maxpacket, urbstat);
+			if (usb_pipecontrol(urb->pipe)) {
+				DBG(3, "%s: req %d %s Wait for ACK\n", __func__,
+				    ep->num_req,
+				    usb_pipein(urb->pipe) ? "IN" : "OUT");
+				ep->nextpid = USB_PID_ACK;
+			} else {
+				if (len % ep->maxpacket ||
+				    !(urb->transfer_flags & URB_ZERO_PACKET)) {
+					urbstat = 0;
+					DBG(3, "%s: req %d URB %s status %d count %d/%d/%d\n",
+					    __func__, ep->num_req, usb_pipein(urb->pipe) ? "IN" : "OUT",
+					    urbstat, len, ep->maxpacket, urb->actual_length);
+				}
+			}
+		}
+		break;
+	case USB_PID_IN:
+		len = PTD_GET_COUNT(ptd);
+		BUG_ON(len > ep->length);
+		urb->actual_length += len;
+		BUG_ON(urb->actual_length > urb->transfer_buffer_length);
+		usb_settoggle(udev, ep->epnum, 0, PTD_GET_TOGGLE(ptd));
+		/* if transfer completed or (allowed) data underrun */
+		if ((urb->transfer_buffer_length == urb->actual_length) ||
+		    len % ep->maxpacket) {
+			DBG(3, "%s: req %d xfer complete %d/%d status %d -> 0\n", __func__,
+			    ep->num_req, len, ep->maxpacket, urbstat);
+			if (usb_pipecontrol(urb->pipe)) {
+				DBG(3, "%s: req %d %s Wait for ACK\n", __func__,
+				    ep->num_req,
+				    usb_pipein(urb->pipe) ? "IN" : "OUT");
+				ep->nextpid = USB_PID_ACK;
+			} else {
+				urbstat = 0;
+				DBG(3, "%s: req %d URB %s status %d count %d/%d/%d\n",
+				    __func__, ep->num_req, usb_pipein(urb->pipe) ? "IN" : "OUT",
+				    urbstat, len, ep->maxpacket, urb->actual_length);
+			}
+		}
+		break;
+	case USB_PID_SETUP:
+		if (urb->transfer_buffer_length == urb->actual_length) {
+			ep->nextpid = USB_PID_ACK;
+		} else if (usb_pipeout(urb->pipe)) {
+			usb_settoggle(udev, 0, 1, 1);
+			ep->nextpid = USB_PID_OUT;
+		} else {
+			usb_settoggle(udev, 0, 0, 1);
+			ep->nextpid = USB_PID_IN;
+		}
+		break;
+	case USB_PID_ACK:
+		DBG(3, "%s: req %d got ACK %d -> 0\n", __func__, ep->num_req,
+		    urbstat);
+		WARN_ON(urbstat != -EINPROGRESS);
+		urbstat = 0;
+		ep->nextpid = 0;
+		break;
+	default:
+		BUG_ON(1);
+	}
+
+ out:
+	if (urbstat != -EINPROGRESS) {
+		DBG(2, "%s: Finishing ep %p req %d urb %p status %d\n", __func__,
+		    ep, ep->num_req, urb, urbstat);
+		finish_request(isp1362_hcd, ep, urb, urbstat);
+	}
+}
+
+static void finish_unlinks(struct isp1362_hcd *isp1362_hcd)
+{
+	struct isp1362_ep *ep;
+	struct isp1362_ep *tmp;
+
+	list_for_each_entry_safe(ep, tmp, &isp1362_hcd->remove_list, remove_list) {
+		struct isp1362_ep_queue *epq =
+			get_ptd_queue(isp1362_hcd, ep->ptd_offset);
+		int index = ep->ptd_index;
+
+		BUG_ON(epq == NULL);
+		if (index >= 0) {
+			DBG(1, "%s: remove PTD[%d] $%04x\n", __func__, index, ep->ptd_offset);
+			BUG_ON(ep->num_ptds == 0);
+			release_ptd_buffers(epq, ep);
+		}
+		if (!list_empty(&ep->hep->urb_list)) {
+			struct urb *urb = get_urb(ep);
+
+			DBG(1, "%s: Finishing req %d ep %p from remove_list\n", __func__,
+			    ep->num_req, ep);
+			finish_request(isp1362_hcd, ep, urb, -ESHUTDOWN);
+		}
+		WARN_ON(list_empty(&ep->active));
+		if (!list_empty(&ep->active)) {
+			list_del_init(&ep->active);
+			DBG(1, "%s: ep %p removed from active list\n", __func__, ep);
+		}
+		list_del_init(&ep->remove_list);
+		DBG(1, "%s: ep %p removed from remove_list\n", __func__, ep);
+	}
+	DBG(1, "%s: Done\n", __func__);
+}
+
+static inline void enable_atl_transfers(struct isp1362_hcd *isp1362_hcd, int count)
+{
+	if (count > 0) {
+		if (count < isp1362_hcd->atl_queue.ptd_count)
+			isp1362_write_reg16(isp1362_hcd, HCATLDTC, count);
+		isp1362_enable_int(isp1362_hcd, HCuPINT_ATL);
+		isp1362_write_reg32(isp1362_hcd, HCATLSKIP, isp1362_hcd->atl_queue.skip_map);
+		isp1362_set_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ATL_ACTIVE);
+	} else
+		isp1362_enable_int(isp1362_hcd, HCuPINT_SOF);
+}
+
+static inline void enable_intl_transfers(struct isp1362_hcd *isp1362_hcd)
+{
+	isp1362_enable_int(isp1362_hcd, HCuPINT_INTL);
+	isp1362_set_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_INTL_ACTIVE);
+	isp1362_write_reg32(isp1362_hcd, HCINTLSKIP, isp1362_hcd->intl_queue.skip_map);
+}
+
+static inline void enable_istl_transfers(struct isp1362_hcd *isp1362_hcd, int flip)
+{
+	isp1362_enable_int(isp1362_hcd, flip ? HCuPINT_ISTL1 : HCuPINT_ISTL0);
+	isp1362_set_mask16(isp1362_hcd, HCBUFSTAT, flip ?
+			   HCBUFSTAT_ISTL1_FULL : HCBUFSTAT_ISTL0_FULL);
+}
+
+static int submit_req(struct isp1362_hcd *isp1362_hcd, struct urb *urb,
+		      struct isp1362_ep *ep, struct isp1362_ep_queue *epq)
+{
+	int index;
+
+	prepare_ptd(isp1362_hcd, urb, ep, epq, 0);
+	index = claim_ptd_buffers(epq, ep, ep->length);
+	if (index == -ENOMEM) {
+		DBG(1, "%s: req %d No free %s PTD available: %d, %08lx:%08lx\n", __func__,
+		    ep->num_req, epq->name, ep->num_ptds, epq->buf_map, epq->skip_map);
+		return index;
+	} else if (index == -EOVERFLOW) {
+		DBG(1, "%s: req %d Not enough space for %d byte %s PTD %d %08lx:%08lx\n",
+		    __func__, ep->num_req, ep->length, epq->name, ep->num_ptds,
+		    epq->buf_map, epq->skip_map);
+		return index;
+	} else
+		BUG_ON(index < 0);
+	list_add_tail(&ep->active, &epq->active);
+	DBG(1, "%s: ep %p req %d len %d added to active list %p\n", __func__,
+	    ep, ep->num_req, ep->length, &epq->active);
+	DBG(1, "%s: Submitting %s PTD $%04x for ep %p req %d\n", __func__, epq->name,
+	    ep->ptd_offset, ep, ep->num_req);
+	isp1362_write_ptd(isp1362_hcd, ep, epq);
+	__clear_bit(ep->ptd_index, &epq->skip_map);
+
+	return 0;
+}
+
+static void start_atl_transfers(struct isp1362_hcd *isp1362_hcd)
+{
+	int ptd_count = 0;
+	struct isp1362_ep_queue *epq = &isp1362_hcd->atl_queue;
+	struct isp1362_ep *ep;
+	int defer = 0;
+
+	if (atomic_read(&epq->finishing)) {
+		DBG(1, "%s: finish_transfers is active for %s\n", __func__, epq->name);
+		return;
+	}
+
+	list_for_each_entry(ep, &isp1362_hcd->async, schedule) {
+		struct urb *urb = get_urb(ep);
+		int ret;
+
+		if (!list_empty(&ep->active)) {
+			DBG(2, "%s: Skipping active %s ep %p\n", __func__, epq->name, ep);
+			continue;
+		}
+
+		DBG(1, "%s: Processing %s ep %p req %d\n", __func__, epq->name,
+		    ep, ep->num_req);
+
+		ret = submit_req(isp1362_hcd, urb, ep, epq);
+		if (ret == -ENOMEM) {
+			defer = 1;
+			break;
+		} else if (ret == -EOVERFLOW) {
+			defer = 1;
+			continue;
+		}
+#ifdef BUGGY_PXA2XX_UDC_USBTEST
+		defer = ep->nextpid == USB_PID_SETUP;
+#endif
+		ptd_count++;
+	}
+
+	/* Avoid starving of endpoints */
+	if (isp1362_hcd->async.next != isp1362_hcd->async.prev) {
+		DBG(2, "%s: Cycling ASYNC schedule %d\n", __func__, ptd_count);
+		list_move(&isp1362_hcd->async, isp1362_hcd->async.next);
+	}
+	if (ptd_count || defer)
+		enable_atl_transfers(isp1362_hcd, defer ? 0 : ptd_count);
+
+	epq->ptd_count += ptd_count;
+	if (epq->ptd_count > epq->stat_maxptds) {
+		epq->stat_maxptds = epq->ptd_count;
+		DBG(0, "%s: max_ptds: %d\n", __func__, epq->stat_maxptds);
+	}
+}
+
+static void start_intl_transfers(struct isp1362_hcd *isp1362_hcd)
+{
+	int ptd_count = 0;
+	struct isp1362_ep_queue *epq = &isp1362_hcd->intl_queue;
+	struct isp1362_ep *ep;
+
+	if (atomic_read(&epq->finishing)) {
+		DBG(1, "%s: finish_transfers is active for %s\n", __func__, epq->name);
+		return;
+	}
+
+	list_for_each_entry(ep, &isp1362_hcd->periodic, schedule) {
+		struct urb *urb = get_urb(ep);
+		int ret;
+
+		if (!list_empty(&ep->active)) {
+			DBG(1, "%s: Skipping active %s ep %p\n", __func__,
+			    epq->name, ep);
+			continue;
+		}
+
+		DBG(1, "%s: Processing %s ep %p req %d\n", __func__,
+		    epq->name, ep, ep->num_req);
+		ret = submit_req(isp1362_hcd, urb, ep, epq);
+		if (ret == -ENOMEM)
+			break;
+		else if (ret == -EOVERFLOW)
+			continue;
+		ptd_count++;
+	}
+
+	if (ptd_count) {
+		static int last_count;
+
+		if (ptd_count != last_count) {
+			DBG(0, "%s: ptd_count: %d\n", __func__, ptd_count);
+			last_count = ptd_count;
+		}
+		enable_intl_transfers(isp1362_hcd);
+	}
+
+	epq->ptd_count += ptd_count;
+	if (epq->ptd_count > epq->stat_maxptds)
+		epq->stat_maxptds = epq->ptd_count;
+}
+
+static inline int next_ptd(struct isp1362_ep_queue *epq, struct isp1362_ep *ep)
+{
+	u16 ptd_offset = ep->ptd_offset;
+	int num_ptds = (ep->length + PTD_HEADER_SIZE + (epq->blk_size - 1)) / epq->blk_size;
+
+	DBG(2, "%s: PTD offset $%04x + %04x => %d * %04x -> $%04x\n", __func__, ptd_offset,
+	    ep->length, num_ptds, epq->blk_size, ptd_offset + num_ptds * epq->blk_size);
+
+	ptd_offset += num_ptds * epq->blk_size;
+	if (ptd_offset < epq->buf_start + epq->buf_size)
+		return ptd_offset;
+	else
+		return -ENOMEM;
+}
+
+static void start_iso_transfers(struct isp1362_hcd *isp1362_hcd)
+{
+	int ptd_count = 0;
+	int flip = isp1362_hcd->istl_flip;
+	struct isp1362_ep_queue *epq;
+	int ptd_offset;
+	struct isp1362_ep *ep;
+	struct isp1362_ep *tmp;
+	u16 fno = isp1362_read_reg32(isp1362_hcd, HCFMNUM);
+
+ fill2:
+	epq = &isp1362_hcd->istl_queue[flip];
+	if (atomic_read(&epq->finishing)) {
+		DBG(1, "%s: finish_transfers is active for %s\n", __func__, epq->name);
+		return;
+	}
+
+	if (!list_empty(&epq->active))
+		return;
+
+	ptd_offset = epq->buf_start;
+	list_for_each_entry_safe(ep, tmp, &isp1362_hcd->isoc, schedule) {
+		struct urb *urb = get_urb(ep);
+		s16 diff = fno - (u16)urb->start_frame;
+
+		DBG(1, "%s: Processing %s ep %p\n", __func__, epq->name, ep);
+
+		if (diff > urb->number_of_packets) {
+			/* time frame for this URB has elapsed */
+			finish_request(isp1362_hcd, ep, urb, -EOVERFLOW);
+			continue;
+		} else if (diff < -1) {
+			/* URB is not due in this frame or the next one.
+			 * Comparing with '-1' instead of '0' accounts for double
+			 * buffering in the ISP1362 which enables us to queue the PTD
+			 * one frame ahead of time
+			 */
+		} else if (diff == -1) {
+			/* submit PTD's that are due in the next frame */
+			prepare_ptd(isp1362_hcd, urb, ep, epq, fno);
+			if (ptd_offset + PTD_HEADER_SIZE + ep->length >
+			    epq->buf_start + epq->buf_size) {
+				pr_err("%s: Not enough ISO buffer space for %d byte PTD\n",
+				    __func__, ep->length);
+				continue;
+			}
+			ep->ptd_offset = ptd_offset;
+			list_add_tail(&ep->active, &epq->active);
+
+			ptd_offset = next_ptd(epq, ep);
+			if (ptd_offset < 0) {
+				pr_warn("%s: req %d No more %s PTD buffers available\n",
+					__func__, ep->num_req, epq->name);
+				break;
+			}
+		}
+	}
+	list_for_each_entry(ep, &epq->active, active) {
+		if (epq->active.next == &ep->active)
+			ep->ptd.mps |= PTD_LAST_MSK;
+		isp1362_write_ptd(isp1362_hcd, ep, epq);
+		ptd_count++;
+	}
+
+	if (ptd_count)
+		enable_istl_transfers(isp1362_hcd, flip);
+
+	epq->ptd_count += ptd_count;
+	if (epq->ptd_count > epq->stat_maxptds)
+		epq->stat_maxptds = epq->ptd_count;
+
+	/* check, whether the second ISTL buffer may also be filled */
+	if (!(isp1362_read_reg16(isp1362_hcd, HCBUFSTAT) &
+	      (flip ? HCBUFSTAT_ISTL0_FULL : HCBUFSTAT_ISTL1_FULL))) {
+		fno++;
+		ptd_count = 0;
+		flip = 1 - flip;
+		goto fill2;
+	}
+}
+
+static void finish_transfers(struct isp1362_hcd *isp1362_hcd, unsigned long done_map,
+			     struct isp1362_ep_queue *epq)
+{
+	struct isp1362_ep *ep;
+	struct isp1362_ep *tmp;
+
+	if (list_empty(&epq->active)) {
+		DBG(1, "%s: Nothing to do for %s queue\n", __func__, epq->name);
+		return;
+	}
+
+	DBG(1, "%s: Finishing %s transfers %08lx\n", __func__, epq->name, done_map);
+
+	atomic_inc(&epq->finishing);
+	list_for_each_entry_safe(ep, tmp, &epq->active, active) {
+		int index = ep->ptd_index;
+
+		DBG(1, "%s: Checking %s PTD[%02x] $%04x\n", __func__, epq->name,
+		    index, ep->ptd_offset);
+
+		BUG_ON(index < 0);
+		if (__test_and_clear_bit(index, &done_map)) {
+			isp1362_read_ptd(isp1362_hcd, ep, epq);
+			epq->free_ptd = index;
+			BUG_ON(ep->num_ptds == 0);
+			release_ptd_buffers(epq, ep);
+
+			DBG(1, "%s: ep %p req %d removed from active list\n", __func__,
+			    ep, ep->num_req);
+			if (!list_empty(&ep->remove_list)) {
+				list_del_init(&ep->remove_list);
+				DBG(1, "%s: ep %p removed from remove list\n", __func__, ep);
+			}
+			DBG(1, "%s: Postprocessing %s ep %p req %d\n", __func__, epq->name,
+			    ep, ep->num_req);
+			postproc_ep(isp1362_hcd, ep);
+		}
+		if (!done_map)
+			break;
+	}
+	if (done_map)
+		pr_warn("%s: done_map not clear: %08lx:%08lx\n",
+			__func__, done_map, epq->skip_map);
+	atomic_dec(&epq->finishing);
+}
+
+static void finish_iso_transfers(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep_queue *epq)
+{
+	struct isp1362_ep *ep;
+	struct isp1362_ep *tmp;
+
+	if (list_empty(&epq->active)) {
+		DBG(1, "%s: Nothing to do for %s queue\n", __func__, epq->name);
+		return;
+	}
+
+	DBG(1, "%s: Finishing %s transfers\n", __func__, epq->name);
+
+	atomic_inc(&epq->finishing);
+	list_for_each_entry_safe(ep, tmp, &epq->active, active) {
+		DBG(1, "%s: Checking PTD $%04x\n", __func__, ep->ptd_offset);
+
+		isp1362_read_ptd(isp1362_hcd, ep, epq);
+		DBG(1, "%s: Postprocessing %s ep %p\n", __func__, epq->name, ep);
+		postproc_ep(isp1362_hcd, ep);
+	}
+	WARN_ON(epq->blk_size != 0);
+	atomic_dec(&epq->finishing);
+}
+
+static irqreturn_t isp1362_irq(struct usb_hcd *hcd)
+{
+	int handled = 0;
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	u16 irqstat;
+	u16 svc_mask;
+
+	spin_lock(&isp1362_hcd->lock);
+
+	BUG_ON(isp1362_hcd->irq_active++);
+
+	isp1362_write_reg16(isp1362_hcd, HCuPINTENB, 0);
+
+	irqstat = isp1362_read_reg16(isp1362_hcd, HCuPINT);
+	DBG(3, "%s: got IRQ %04x:%04x\n", __func__, irqstat, isp1362_hcd->irqenb);
+
+	/* only handle interrupts that are currently enabled */
+	irqstat &= isp1362_hcd->irqenb;
+	isp1362_write_reg16(isp1362_hcd, HCuPINT, irqstat);
+	svc_mask = irqstat;
+
+	if (irqstat & HCuPINT_SOF) {
+		isp1362_hcd->irqenb &= ~HCuPINT_SOF;
+		isp1362_hcd->irq_stat[ISP1362_INT_SOF]++;
+		handled = 1;
+		svc_mask &= ~HCuPINT_SOF;
+		DBG(3, "%s: SOF\n", __func__);
+		isp1362_hcd->fmindex = isp1362_read_reg32(isp1362_hcd, HCFMNUM);
+		if (!list_empty(&isp1362_hcd->remove_list))
+			finish_unlinks(isp1362_hcd);
+		if (!list_empty(&isp1362_hcd->async) && !(irqstat & HCuPINT_ATL)) {
+			if (list_empty(&isp1362_hcd->atl_queue.active)) {
+				start_atl_transfers(isp1362_hcd);
+			} else {
+				isp1362_enable_int(isp1362_hcd, HCuPINT_ATL);
+				isp1362_write_reg32(isp1362_hcd, HCATLSKIP,
+						    isp1362_hcd->atl_queue.skip_map);
+				isp1362_set_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ATL_ACTIVE);
+			}
+		}
+	}
+
+	if (irqstat & HCuPINT_ISTL0) {
+		isp1362_hcd->irq_stat[ISP1362_INT_ISTL0]++;
+		handled = 1;
+		svc_mask &= ~HCuPINT_ISTL0;
+		isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ISTL0_FULL);
+		DBG(1, "%s: ISTL0\n", __func__);
+		WARN_ON((int)!!isp1362_hcd->istl_flip);
+		WARN_ON(isp1362_read_reg16(isp1362_hcd, HCBUFSTAT) &
+			HCBUFSTAT_ISTL0_ACTIVE);
+		WARN_ON(!(isp1362_read_reg16(isp1362_hcd, HCBUFSTAT) &
+			HCBUFSTAT_ISTL0_DONE));
+		isp1362_hcd->irqenb &= ~HCuPINT_ISTL0;
+	}
+
+	if (irqstat & HCuPINT_ISTL1) {
+		isp1362_hcd->irq_stat[ISP1362_INT_ISTL1]++;
+		handled = 1;
+		svc_mask &= ~HCuPINT_ISTL1;
+		isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ISTL1_FULL);
+		DBG(1, "%s: ISTL1\n", __func__);
+		WARN_ON(!(int)isp1362_hcd->istl_flip);
+		WARN_ON(isp1362_read_reg16(isp1362_hcd, HCBUFSTAT) &
+			HCBUFSTAT_ISTL1_ACTIVE);
+		WARN_ON(!(isp1362_read_reg16(isp1362_hcd, HCBUFSTAT) &
+			HCBUFSTAT_ISTL1_DONE));
+		isp1362_hcd->irqenb &= ~HCuPINT_ISTL1;
+	}
+
+	if (irqstat & (HCuPINT_ISTL0 | HCuPINT_ISTL1)) {
+		WARN_ON((irqstat & (HCuPINT_ISTL0 | HCuPINT_ISTL1)) ==
+			(HCuPINT_ISTL0 | HCuPINT_ISTL1));
+		finish_iso_transfers(isp1362_hcd,
+				     &isp1362_hcd->istl_queue[isp1362_hcd->istl_flip]);
+		start_iso_transfers(isp1362_hcd);
+		isp1362_hcd->istl_flip = 1 - isp1362_hcd->istl_flip;
+	}
+
+	if (irqstat & HCuPINT_INTL) {
+		u32 done_map = isp1362_read_reg32(isp1362_hcd, HCINTLDONE);
+		u32 skip_map = isp1362_read_reg32(isp1362_hcd, HCINTLSKIP);
+		isp1362_hcd->irq_stat[ISP1362_INT_INTL]++;
+
+		DBG(2, "%s: INTL\n", __func__);
+
+		svc_mask &= ~HCuPINT_INTL;
+
+		isp1362_write_reg32(isp1362_hcd, HCINTLSKIP, skip_map | done_map);
+		if (~(done_map | skip_map) == 0)
+			/* All PTDs are finished, disable INTL processing entirely */
+			isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_INTL_ACTIVE);
+
+		handled = 1;
+		WARN_ON(!done_map);
+		if (done_map) {
+			DBG(3, "%s: INTL done_map %08x\n", __func__, done_map);
+			finish_transfers(isp1362_hcd, done_map, &isp1362_hcd->intl_queue);
+			start_intl_transfers(isp1362_hcd);
+		}
+	}
+
+	if (irqstat & HCuPINT_ATL) {
+		u32 done_map = isp1362_read_reg32(isp1362_hcd, HCATLDONE);
+		u32 skip_map = isp1362_read_reg32(isp1362_hcd, HCATLSKIP);
+		isp1362_hcd->irq_stat[ISP1362_INT_ATL]++;
+
+		DBG(2, "%s: ATL\n", __func__);
+
+		svc_mask &= ~HCuPINT_ATL;
+
+		isp1362_write_reg32(isp1362_hcd, HCATLSKIP, skip_map | done_map);
+		if (~(done_map | skip_map) == 0)
+			isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ATL_ACTIVE);
+		if (done_map) {
+			DBG(3, "%s: ATL done_map %08x\n", __func__, done_map);
+			finish_transfers(isp1362_hcd, done_map, &isp1362_hcd->atl_queue);
+			start_atl_transfers(isp1362_hcd);
+		}
+		handled = 1;
+	}
+
+	if (irqstat & HCuPINT_OPR) {
+		u32 intstat = isp1362_read_reg32(isp1362_hcd, HCINTSTAT);
+		isp1362_hcd->irq_stat[ISP1362_INT_OPR]++;
+
+		svc_mask &= ~HCuPINT_OPR;
+		DBG(2, "%s: OPR %08x:%08x\n", __func__, intstat, isp1362_hcd->intenb);
+		intstat &= isp1362_hcd->intenb;
+		if (intstat & OHCI_INTR_UE) {
+			pr_err("Unrecoverable error\n");
+			/* FIXME: do here reset or cleanup or whatever */
+		}
+		if (intstat & OHCI_INTR_RHSC) {
+			isp1362_hcd->rhstatus = isp1362_read_reg32(isp1362_hcd, HCRHSTATUS);
+			isp1362_hcd->rhport[0] = isp1362_read_reg32(isp1362_hcd, HCRHPORT1);
+			isp1362_hcd->rhport[1] = isp1362_read_reg32(isp1362_hcd, HCRHPORT2);
+		}
+		if (intstat & OHCI_INTR_RD) {
+			pr_info("%s: RESUME DETECTED\n", __func__);
+			isp1362_show_reg(isp1362_hcd, HCCONTROL);
+			usb_hcd_resume_root_hub(hcd);
+		}
+		isp1362_write_reg32(isp1362_hcd, HCINTSTAT, intstat);
+		irqstat &= ~HCuPINT_OPR;
+		handled = 1;
+	}
+
+	if (irqstat & HCuPINT_SUSP) {
+		isp1362_hcd->irq_stat[ISP1362_INT_SUSP]++;
+		handled = 1;
+		svc_mask &= ~HCuPINT_SUSP;
+
+		pr_info("%s: SUSPEND IRQ\n", __func__);
+	}
+
+	if (irqstat & HCuPINT_CLKRDY) {
+		isp1362_hcd->irq_stat[ISP1362_INT_CLKRDY]++;
+		handled = 1;
+		isp1362_hcd->irqenb &= ~HCuPINT_CLKRDY;
+		svc_mask &= ~HCuPINT_CLKRDY;
+		pr_info("%s: CLKRDY IRQ\n", __func__);
+	}
+
+	if (svc_mask)
+		pr_err("%s: Unserviced interrupt(s) %04x\n", __func__, svc_mask);
+
+	isp1362_write_reg16(isp1362_hcd, HCuPINTENB, isp1362_hcd->irqenb);
+	isp1362_hcd->irq_active--;
+	spin_unlock(&isp1362_hcd->lock);
+
+	return IRQ_RETVAL(handled);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define	MAX_PERIODIC_LOAD	900	/* out of 1000 usec */
+static int balance(struct isp1362_hcd *isp1362_hcd, u16 interval, u16 load)
+{
+	int i, branch = -ENOSPC;
+
+	/* search for the least loaded schedule branch of that interval
+	 * which has enough bandwidth left unreserved.
+	 */
+	for (i = 0; i < interval; i++) {
+		if (branch < 0 || isp1362_hcd->load[branch] > isp1362_hcd->load[i]) {
+			int j;
+
+			for (j = i; j < PERIODIC_SIZE; j += interval) {
+				if ((isp1362_hcd->load[j] + load) > MAX_PERIODIC_LOAD) {
+					pr_err("%s: new load %d load[%02x] %d max %d\n", __func__,
+					    load, j, isp1362_hcd->load[j], MAX_PERIODIC_LOAD);
+					break;
+				}
+			}
+			if (j < PERIODIC_SIZE)
+				continue;
+			branch = i;
+		}
+	}
+	return branch;
+}
+
+/* NB! ALL the code above this point runs with isp1362_hcd->lock
+   held, irqs off
+*/
+
+/*-------------------------------------------------------------------------*/
+
+static int isp1362_urb_enqueue(struct usb_hcd *hcd,
+			       struct urb *urb,
+			       gfp_t mem_flags)
+{
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	struct usb_device *udev = urb->dev;
+	unsigned int pipe = urb->pipe;
+	int is_out = !usb_pipein(pipe);
+	int type = usb_pipetype(pipe);
+	int epnum = usb_pipeendpoint(pipe);
+	struct usb_host_endpoint *hep = urb->ep;
+	struct isp1362_ep *ep = NULL;
+	unsigned long flags;
+	int retval = 0;
+
+	DBG(3, "%s: urb %p\n", __func__, urb);
+
+	if (type == PIPE_ISOCHRONOUS) {
+		pr_err("Isochronous transfers not supported\n");
+		return -ENOSPC;
+	}
+
+	URB_DBG("%s: FA %d ep%d%s %s: len %d %s%s\n", __func__,
+		usb_pipedevice(pipe), epnum,
+		is_out ? "out" : "in",
+		usb_pipecontrol(pipe) ? "ctrl" :
+			usb_pipeint(pipe) ? "int" :
+			usb_pipebulk(pipe) ? "bulk" :
+			"iso",
+		urb->transfer_buffer_length,
+		(urb->transfer_flags & URB_ZERO_PACKET) ? "ZERO_PACKET " : "",
+		!(urb->transfer_flags & URB_SHORT_NOT_OK) ?
+		"short_ok" : "");
+
+	/* avoid all allocations within spinlocks: request or endpoint */
+	if (!hep->hcpriv) {
+		ep = kzalloc(sizeof *ep, mem_flags);
+		if (!ep)
+			return -ENOMEM;
+	}
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+
+	/* don't submit to a dead or disabled port */
+	if (!((isp1362_hcd->rhport[0] | isp1362_hcd->rhport[1]) &
+	      USB_PORT_STAT_ENABLE) ||
+	    !HC_IS_RUNNING(hcd->state)) {
+		kfree(ep);
+		retval = -ENODEV;
+		goto fail_not_linked;
+	}
+
+	retval = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (retval) {
+		kfree(ep);
+		goto fail_not_linked;
+	}
+
+	if (hep->hcpriv) {
+		ep = hep->hcpriv;
+	} else {
+		INIT_LIST_HEAD(&ep->schedule);
+		INIT_LIST_HEAD(&ep->active);
+		INIT_LIST_HEAD(&ep->remove_list);
+		ep->udev = usb_get_dev(udev);
+		ep->hep = hep;
+		ep->epnum = epnum;
+		ep->maxpacket = usb_maxpacket(udev, urb->pipe);
+		ep->ptd_offset = -EINVAL;
+		ep->ptd_index = -EINVAL;
+		usb_settoggle(udev, epnum, is_out, 0);
+
+		if (type == PIPE_CONTROL)
+			ep->nextpid = USB_PID_SETUP;
+		else if (is_out)
+			ep->nextpid = USB_PID_OUT;
+		else
+			ep->nextpid = USB_PID_IN;
+
+		switch (type) {
+		case PIPE_ISOCHRONOUS:
+		case PIPE_INTERRUPT:
+			if (urb->interval > PERIODIC_SIZE)
+				urb->interval = PERIODIC_SIZE;
+			ep->interval = urb->interval;
+			ep->branch = PERIODIC_SIZE;
+			ep->load = usb_calc_bus_time(udev->speed, !is_out,
+						     type == PIPE_ISOCHRONOUS,
+						     usb_maxpacket(udev, pipe)) / 1000;
+			break;
+		}
+		hep->hcpriv = ep;
+	}
+	ep->num_req = isp1362_hcd->req_serial++;
+
+	/* maybe put endpoint into schedule */
+	switch (type) {
+	case PIPE_CONTROL:
+	case PIPE_BULK:
+		if (list_empty(&ep->schedule)) {
+			DBG(1, "%s: Adding ep %p req %d to async schedule\n",
+				__func__, ep, ep->num_req);
+			list_add_tail(&ep->schedule, &isp1362_hcd->async);
+		}
+		break;
+	case PIPE_ISOCHRONOUS:
+	case PIPE_INTERRUPT:
+		urb->interval = ep->interval;
+
+		/* urb submitted for already existing EP */
+		if (ep->branch < PERIODIC_SIZE)
+			break;
+
+		retval = balance(isp1362_hcd, ep->interval, ep->load);
+		if (retval < 0) {
+			pr_err("%s: balance returned %d\n", __func__, retval);
+			goto fail;
+		}
+		ep->branch = retval;
+		retval = 0;
+		isp1362_hcd->fmindex = isp1362_read_reg32(isp1362_hcd, HCFMNUM);
+		DBG(1, "%s: Current frame %04x branch %02x start_frame %04x(%04x)\n",
+		    __func__, isp1362_hcd->fmindex, ep->branch,
+		    ((isp1362_hcd->fmindex + PERIODIC_SIZE - 1) &
+		     ~(PERIODIC_SIZE - 1)) + ep->branch,
+		    (isp1362_hcd->fmindex & (PERIODIC_SIZE - 1)) + ep->branch);
+
+		if (list_empty(&ep->schedule)) {
+			if (type == PIPE_ISOCHRONOUS) {
+				u16 frame = isp1362_hcd->fmindex;
+
+				frame += max_t(u16, 8, ep->interval);
+				frame &= ~(ep->interval - 1);
+				frame |= ep->branch;
+				if (frame_before(frame, isp1362_hcd->fmindex))
+					frame += ep->interval;
+				urb->start_frame = frame;
+
+				DBG(1, "%s: Adding ep %p to isoc schedule\n", __func__, ep);
+				list_add_tail(&ep->schedule, &isp1362_hcd->isoc);
+			} else {
+				DBG(1, "%s: Adding ep %p to periodic schedule\n", __func__, ep);
+				list_add_tail(&ep->schedule, &isp1362_hcd->periodic);
+			}
+		} else
+			DBG(1, "%s: ep %p already scheduled\n", __func__, ep);
+
+		DBG(2, "%s: load %d bandwidth %d -> %d\n", __func__,
+		    ep->load / ep->interval, isp1362_hcd->load[ep->branch],
+		    isp1362_hcd->load[ep->branch] + ep->load);
+		isp1362_hcd->load[ep->branch] += ep->load;
+	}
+
+	urb->hcpriv = hep;
+	ALIGNSTAT(isp1362_hcd, urb->transfer_buffer);
+
+	switch (type) {
+	case PIPE_CONTROL:
+	case PIPE_BULK:
+		start_atl_transfers(isp1362_hcd);
+		break;
+	case PIPE_INTERRUPT:
+		start_intl_transfers(isp1362_hcd);
+		break;
+	case PIPE_ISOCHRONOUS:
+		start_iso_transfers(isp1362_hcd);
+		break;
+	default:
+		BUG();
+	}
+ fail:
+	if (retval)
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+
+ fail_not_linked:
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+	if (retval)
+		DBG(0, "%s: urb %p failed with %d\n", __func__, urb, retval);
+	return retval;
+}
+
+static int isp1362_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	struct usb_host_endpoint *hep;
+	unsigned long flags;
+	struct isp1362_ep *ep;
+	int retval = 0;
+
+	DBG(3, "%s: urb %p\n", __func__, urb);
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	retval = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (retval)
+		goto done;
+
+	hep = urb->hcpriv;
+
+	if (!hep) {
+		spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+		return -EIDRM;
+	}
+
+	ep = hep->hcpriv;
+	if (ep) {
+		/* In front of queue? */
+		if (ep->hep->urb_list.next == &urb->urb_list) {
+			if (!list_empty(&ep->active)) {
+				DBG(1, "%s: urb %p ep %p req %d active PTD[%d] $%04x\n", __func__,
+				    urb, ep, ep->num_req, ep->ptd_index, ep->ptd_offset);
+				/* disable processing and queue PTD for removal */
+				remove_ptd(isp1362_hcd, ep);
+				urb = NULL;
+			}
+		}
+		if (urb) {
+			DBG(1, "%s: Finishing ep %p req %d\n", __func__, ep,
+			    ep->num_req);
+			finish_request(isp1362_hcd, ep, urb, status);
+		} else
+			DBG(1, "%s: urb %p active; wait4irq\n", __func__, urb);
+	} else {
+		pr_warn("%s: No EP in URB %p\n", __func__, urb);
+		retval = -EINVAL;
+	}
+done:
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+	DBG(3, "%s: exit\n", __func__);
+
+	return retval;
+}
+
+static void isp1362_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
+{
+	struct isp1362_ep *ep = hep->hcpriv;
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	unsigned long flags;
+
+	DBG(1, "%s: ep %p\n", __func__, ep);
+	if (!ep)
+		return;
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	if (!list_empty(&hep->urb_list)) {
+		if (!list_empty(&ep->active) && list_empty(&ep->remove_list)) {
+			DBG(1, "%s: Removing ep %p req %d PTD[%d] $%04x\n", __func__,
+			    ep, ep->num_req, ep->ptd_index, ep->ptd_offset);
+			remove_ptd(isp1362_hcd, ep);
+			pr_info("%s: Waiting for Interrupt to clean up\n", __func__);
+		}
+	}
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+	/* Wait for interrupt to clear out active list */
+	while (!list_empty(&ep->active))
+		msleep(1);
+
+	DBG(1, "%s: Freeing EP %p\n", __func__, ep);
+
+	usb_put_dev(ep->udev);
+	kfree(ep);
+	hep->hcpriv = NULL;
+}
+
+static int isp1362_get_frame(struct usb_hcd *hcd)
+{
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	u32 fmnum;
+	unsigned long flags;
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	fmnum = isp1362_read_reg32(isp1362_hcd, HCFMNUM);
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+	return (int)fmnum;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Adapted from ohci-hub.c */
+static int isp1362_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	int ports, i, changed = 0;
+	unsigned long flags;
+
+	if (!HC_IS_RUNNING(hcd->state))
+		return -ESHUTDOWN;
+
+	/* Report no status change now, if we are scheduled to be
+	   called later */
+	if (timer_pending(&hcd->rh_timer))
+		return 0;
+
+	ports = isp1362_hcd->rhdesca & RH_A_NDP;
+	BUG_ON(ports > 2);
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	/* init status */
+	if (isp1362_hcd->rhstatus & (RH_HS_LPSC | RH_HS_OCIC))
+		buf[0] = changed = 1;
+	else
+		buf[0] = 0;
+
+	for (i = 0; i < ports; i++) {
+		u32 status = isp1362_hcd->rhport[i];
+
+		if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC |
+			      RH_PS_OCIC | RH_PS_PRSC)) {
+			changed = 1;
+			buf[0] |= 1 << (i + 1);
+			continue;
+		}
+
+		if (!(status & RH_PS_CCS))
+			continue;
+	}
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+	return changed;
+}
+
+static void isp1362_hub_descriptor(struct isp1362_hcd *isp1362_hcd,
+				   struct usb_hub_descriptor *desc)
+{
+	u32 reg = isp1362_hcd->rhdesca;
+
+	DBG(3, "%s: enter\n", __func__);
+
+	desc->bDescriptorType = USB_DT_HUB;
+	desc->bDescLength = 9;
+	desc->bHubContrCurrent = 0;
+	desc->bNbrPorts = reg & 0x3;
+	/* Power switching, device type, overcurrent. */
+	desc->wHubCharacteristics = cpu_to_le16((reg >> 8) &
+						(HUB_CHAR_LPSM |
+						 HUB_CHAR_COMPOUND |
+						 HUB_CHAR_OCPM));
+	DBG(0, "%s: hubcharacteristics = %02x\n", __func__,
+			desc->wHubCharacteristics);
+	desc->bPwrOn2PwrGood = (reg >> 24) & 0xff;
+	/* ports removable, and legacy PortPwrCtrlMask */
+	desc->u.hs.DeviceRemovable[0] = desc->bNbrPorts == 1 ? 1 << 1 : 3 << 1;
+	desc->u.hs.DeviceRemovable[1] = ~0;
+
+	DBG(3, "%s: exit\n", __func__);
+}
+
+/* Adapted from ohci-hub.c */
+static int isp1362_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+			       u16 wIndex, char *buf, u16 wLength)
+{
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	int retval = 0;
+	unsigned long flags;
+	unsigned long t1;
+	int ports = isp1362_hcd->rhdesca & RH_A_NDP;
+	u32 tmp = 0;
+
+	switch (typeReq) {
+	case ClearHubFeature:
+		DBG(0, "ClearHubFeature: ");
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+			DBG(0, "C_HUB_OVER_CURRENT\n");
+			spin_lock_irqsave(&isp1362_hcd->lock, flags);
+			isp1362_write_reg32(isp1362_hcd, HCRHSTATUS, RH_HS_OCIC);
+			spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+			break;
+		case C_HUB_LOCAL_POWER:
+			DBG(0, "C_HUB_LOCAL_POWER\n");
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetHubFeature:
+		DBG(0, "SetHubFeature: ");
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			DBG(0, "C_HUB_OVER_CURRENT or C_HUB_LOCAL_POWER\n");
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case GetHubDescriptor:
+		DBG(0, "GetHubDescriptor\n");
+		isp1362_hub_descriptor(isp1362_hcd, (struct usb_hub_descriptor *)buf);
+		break;
+	case GetHubStatus:
+		DBG(0, "GetHubStatus\n");
+		put_unaligned(cpu_to_le32(0), (__le32 *) buf);
+		break;
+	case GetPortStatus:
+#ifndef VERBOSE
+		DBG(0, "GetPortStatus\n");
+#endif
+		if (!wIndex || wIndex > ports)
+			goto error;
+		tmp = isp1362_hcd->rhport[--wIndex];
+		put_unaligned(cpu_to_le32(tmp), (__le32 *) buf);
+		break;
+	case ClearPortFeature:
+		DBG(0, "ClearPortFeature: ");
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			DBG(0, "USB_PORT_FEAT_ENABLE\n");
+			tmp = RH_PS_CCS;
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			DBG(0, "USB_PORT_FEAT_C_ENABLE\n");
+			tmp = RH_PS_PESC;
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			DBG(0, "USB_PORT_FEAT_SUSPEND\n");
+			tmp = RH_PS_POCI;
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			DBG(0, "USB_PORT_FEAT_C_SUSPEND\n");
+			tmp = RH_PS_PSSC;
+			break;
+		case USB_PORT_FEAT_POWER:
+			DBG(0, "USB_PORT_FEAT_POWER\n");
+			tmp = RH_PS_LSDA;
+
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			DBG(0, "USB_PORT_FEAT_C_CONNECTION\n");
+			tmp = RH_PS_CSC;
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			DBG(0, "USB_PORT_FEAT_C_OVER_CURRENT\n");
+			tmp = RH_PS_OCIC;
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			DBG(0, "USB_PORT_FEAT_C_RESET\n");
+			tmp = RH_PS_PRSC;
+			break;
+		default:
+			goto error;
+		}
+
+		spin_lock_irqsave(&isp1362_hcd->lock, flags);
+		isp1362_write_reg32(isp1362_hcd, HCRHPORT1 + wIndex, tmp);
+		isp1362_hcd->rhport[wIndex] =
+			isp1362_read_reg32(isp1362_hcd, HCRHPORT1 + wIndex);
+		spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+		break;
+	case SetPortFeature:
+		DBG(0, "SetPortFeature: ");
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			DBG(0, "USB_PORT_FEAT_SUSPEND\n");
+			spin_lock_irqsave(&isp1362_hcd->lock, flags);
+			isp1362_write_reg32(isp1362_hcd, HCRHPORT1 + wIndex, RH_PS_PSS);
+			isp1362_hcd->rhport[wIndex] =
+				isp1362_read_reg32(isp1362_hcd, HCRHPORT1 + wIndex);
+			spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+			break;
+		case USB_PORT_FEAT_POWER:
+			DBG(0, "USB_PORT_FEAT_POWER\n");
+			spin_lock_irqsave(&isp1362_hcd->lock, flags);
+			isp1362_write_reg32(isp1362_hcd, HCRHPORT1 + wIndex, RH_PS_PPS);
+			isp1362_hcd->rhport[wIndex] =
+				isp1362_read_reg32(isp1362_hcd, HCRHPORT1 + wIndex);
+			spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+			break;
+		case USB_PORT_FEAT_RESET:
+			DBG(0, "USB_PORT_FEAT_RESET\n");
+			spin_lock_irqsave(&isp1362_hcd->lock, flags);
+
+			t1 = jiffies + msecs_to_jiffies(USB_RESET_WIDTH);
+			while (time_before(jiffies, t1)) {
+				/* spin until any current reset finishes */
+				for (;;) {
+					tmp = isp1362_read_reg32(isp1362_hcd, HCRHPORT1 + wIndex);
+					if (!(tmp & RH_PS_PRS))
+						break;
+					udelay(500);
+				}
+				if (!(tmp & RH_PS_CCS))
+					break;
+				/* Reset lasts 10ms (claims datasheet) */
+				isp1362_write_reg32(isp1362_hcd, HCRHPORT1 + wIndex, (RH_PS_PRS));
+
+				spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+				msleep(10);
+				spin_lock_irqsave(&isp1362_hcd->lock, flags);
+			}
+
+			isp1362_hcd->rhport[wIndex] = isp1362_read_reg32(isp1362_hcd,
+									 HCRHPORT1 + wIndex);
+			spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+			break;
+		default:
+			goto error;
+		}
+		break;
+
+	default:
+ error:
+		/* "protocol stall" on error */
+		DBG(0, "PROTOCOL STALL\n");
+		retval = -EPIPE;
+	}
+
+	return retval;
+}
+
+#ifdef	CONFIG_PM
+static int isp1362_bus_suspend(struct usb_hcd *hcd)
+{
+	int status = 0;
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	unsigned long flags;
+
+	if (time_before(jiffies, isp1362_hcd->next_statechange))
+		msleep(5);
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+
+	isp1362_hcd->hc_control = isp1362_read_reg32(isp1362_hcd, HCCONTROL);
+	switch (isp1362_hcd->hc_control & OHCI_CTRL_HCFS) {
+	case OHCI_USB_RESUME:
+		DBG(0, "%s: resume/suspend?\n", __func__);
+		isp1362_hcd->hc_control &= ~OHCI_CTRL_HCFS;
+		isp1362_hcd->hc_control |= OHCI_USB_RESET;
+		isp1362_write_reg32(isp1362_hcd, HCCONTROL, isp1362_hcd->hc_control);
+		fallthrough;
+	case OHCI_USB_RESET:
+		status = -EBUSY;
+		pr_warn("%s: needs reinit!\n", __func__);
+		goto done;
+	case OHCI_USB_SUSPEND:
+		pr_warn("%s: already suspended?\n", __func__);
+		goto done;
+	}
+	DBG(0, "%s: suspend root hub\n", __func__);
+
+	/* First stop any processing */
+	hcd->state = HC_STATE_QUIESCING;
+	if (!list_empty(&isp1362_hcd->atl_queue.active) ||
+	    !list_empty(&isp1362_hcd->intl_queue.active) ||
+	    !list_empty(&isp1362_hcd->istl_queue[0] .active) ||
+	    !list_empty(&isp1362_hcd->istl_queue[1] .active)) {
+		int limit;
+
+		isp1362_write_reg32(isp1362_hcd, HCATLSKIP, ~0);
+		isp1362_write_reg32(isp1362_hcd, HCINTLSKIP, ~0);
+		isp1362_write_reg16(isp1362_hcd, HCBUFSTAT, 0);
+		isp1362_write_reg16(isp1362_hcd, HCuPINTENB, 0);
+		isp1362_write_reg32(isp1362_hcd, HCINTSTAT, OHCI_INTR_SF);
+
+		DBG(0, "%s: stopping schedules ...\n", __func__);
+		limit = 2000;
+		while (limit > 0) {
+			udelay(250);
+			limit -= 250;
+			if (isp1362_read_reg32(isp1362_hcd, HCINTSTAT) & OHCI_INTR_SF)
+				break;
+		}
+		mdelay(7);
+		if (isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_ATL) {
+			u32 done_map = isp1362_read_reg32(isp1362_hcd, HCATLDONE);
+			finish_transfers(isp1362_hcd, done_map, &isp1362_hcd->atl_queue);
+		}
+		if (isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_INTL) {
+			u32 done_map = isp1362_read_reg32(isp1362_hcd, HCINTLDONE);
+			finish_transfers(isp1362_hcd, done_map, &isp1362_hcd->intl_queue);
+		}
+		if (isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_ISTL0)
+			finish_iso_transfers(isp1362_hcd, &isp1362_hcd->istl_queue[0]);
+		if (isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_ISTL1)
+			finish_iso_transfers(isp1362_hcd, &isp1362_hcd->istl_queue[1]);
+	}
+	DBG(0, "%s: HCINTSTAT: %08x\n", __func__,
+		    isp1362_read_reg32(isp1362_hcd, HCINTSTAT));
+	isp1362_write_reg32(isp1362_hcd, HCINTSTAT,
+			    isp1362_read_reg32(isp1362_hcd, HCINTSTAT));
+
+	/* Suspend hub */
+	isp1362_hcd->hc_control = OHCI_USB_SUSPEND;
+	isp1362_show_reg(isp1362_hcd, HCCONTROL);
+	isp1362_write_reg32(isp1362_hcd, HCCONTROL, isp1362_hcd->hc_control);
+	isp1362_show_reg(isp1362_hcd, HCCONTROL);
+
+#if 1
+	isp1362_hcd->hc_control = isp1362_read_reg32(isp1362_hcd, HCCONTROL);
+	if ((isp1362_hcd->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_SUSPEND) {
+		pr_err("%s: controller won't suspend %08x\n", __func__,
+		    isp1362_hcd->hc_control);
+		status = -EBUSY;
+	} else
+#endif
+	{
+		/* no resumes until devices finish suspending */
+		isp1362_hcd->next_statechange = jiffies + msecs_to_jiffies(5);
+	}
+done:
+	if (status == 0) {
+		hcd->state = HC_STATE_SUSPENDED;
+		DBG(0, "%s: HCD suspended: %08x\n", __func__,
+		    isp1362_read_reg32(isp1362_hcd, HCCONTROL));
+	}
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+	return status;
+}
+
+static int isp1362_bus_resume(struct usb_hcd *hcd)
+{
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	u32 port;
+	unsigned long flags;
+	int status = -EINPROGRESS;
+
+	if (time_before(jiffies, isp1362_hcd->next_statechange))
+		msleep(5);
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	isp1362_hcd->hc_control = isp1362_read_reg32(isp1362_hcd, HCCONTROL);
+	pr_info("%s: HCCONTROL: %08x\n", __func__, isp1362_hcd->hc_control);
+	if (hcd->state == HC_STATE_RESUMING) {
+		pr_warn("%s: duplicate resume\n", __func__);
+		status = 0;
+	} else
+		switch (isp1362_hcd->hc_control & OHCI_CTRL_HCFS) {
+		case OHCI_USB_SUSPEND:
+			DBG(0, "%s: resume root hub\n", __func__);
+			isp1362_hcd->hc_control &= ~OHCI_CTRL_HCFS;
+			isp1362_hcd->hc_control |= OHCI_USB_RESUME;
+			isp1362_write_reg32(isp1362_hcd, HCCONTROL, isp1362_hcd->hc_control);
+			break;
+		case OHCI_USB_RESUME:
+			/* HCFS changes sometime after INTR_RD */
+			DBG(0, "%s: remote wakeup\n", __func__);
+			break;
+		case OHCI_USB_OPER:
+			DBG(0, "%s: odd resume\n", __func__);
+			status = 0;
+			hcd->self.root_hub->dev.power.power_state = PMSG_ON;
+			break;
+		default:		/* RESET, we lost power */
+			DBG(0, "%s: root hub hardware reset\n", __func__);
+			status = -EBUSY;
+		}
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+	if (status == -EBUSY) {
+		DBG(0, "%s: Restarting HC\n", __func__);
+		isp1362_hc_stop(hcd);
+		return isp1362_hc_start(hcd);
+	}
+	if (status != -EINPROGRESS)
+		return status;
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	port = isp1362_read_reg32(isp1362_hcd, HCRHDESCA) & RH_A_NDP;
+	while (port--) {
+		u32 stat = isp1362_read_reg32(isp1362_hcd, HCRHPORT1 + port);
+
+		/* force global, not selective, resume */
+		if (!(stat & RH_PS_PSS)) {
+			DBG(0, "%s: Not Resuming RH port %d\n", __func__, port);
+			continue;
+		}
+		DBG(0, "%s: Resuming RH port %d\n", __func__, port);
+		isp1362_write_reg32(isp1362_hcd, HCRHPORT1 + port, RH_PS_POCI);
+	}
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+	/* Some controllers (lucent) need extra-long delays */
+	hcd->state = HC_STATE_RESUMING;
+	mdelay(20 /* usb 11.5.1.10 */ + 15);
+
+	isp1362_hcd->hc_control = OHCI_USB_OPER;
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	isp1362_show_reg(isp1362_hcd, HCCONTROL);
+	isp1362_write_reg32(isp1362_hcd, HCCONTROL, isp1362_hcd->hc_control);
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+	/* TRSMRCY */
+	msleep(10);
+
+	/* keep it alive for ~5x suspend + resume costs */
+	isp1362_hcd->next_statechange = jiffies + msecs_to_jiffies(250);
+
+	hcd->self.root_hub->dev.power.power_state = PMSG_ON;
+	hcd->state = HC_STATE_RUNNING;
+	return 0;
+}
+#else
+#define	isp1362_bus_suspend	NULL
+#define	isp1362_bus_resume	NULL
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static void dump_irq(struct seq_file *s, char *label, u16 mask)
+{
+	seq_printf(s, "%-15s %04x%s%s%s%s%s%s\n", label, mask,
+		   mask & HCuPINT_CLKRDY ? " clkrdy" : "",
+		   mask & HCuPINT_SUSP ? " susp" : "",
+		   mask & HCuPINT_OPR ? " opr" : "",
+		   mask & HCuPINT_EOT ? " eot" : "",
+		   mask & HCuPINT_ATL ? " atl" : "",
+		   mask & HCuPINT_SOF ? " sof" : "");
+}
+
+static void dump_int(struct seq_file *s, char *label, u32 mask)
+{
+	seq_printf(s, "%-15s %08x%s%s%s%s%s%s%s\n", label, mask,
+		   mask & OHCI_INTR_MIE ? " MIE" : "",
+		   mask & OHCI_INTR_RHSC ? " rhsc" : "",
+		   mask & OHCI_INTR_FNO ? " fno" : "",
+		   mask & OHCI_INTR_UE ? " ue" : "",
+		   mask & OHCI_INTR_RD ? " rd" : "",
+		   mask & OHCI_INTR_SF ? " sof" : "",
+		   mask & OHCI_INTR_SO ? " so" : "");
+}
+
+static void dump_ctrl(struct seq_file *s, char *label, u32 mask)
+{
+	seq_printf(s, "%-15s %08x%s%s%s\n", label, mask,
+		   mask & OHCI_CTRL_RWC ? " rwc" : "",
+		   mask & OHCI_CTRL_RWE ? " rwe" : "",
+		   ({
+			   char *hcfs;
+			   switch (mask & OHCI_CTRL_HCFS) {
+			   case OHCI_USB_OPER:
+				   hcfs = " oper";
+				   break;
+			   case OHCI_USB_RESET:
+				   hcfs = " reset";
+				   break;
+			   case OHCI_USB_RESUME:
+				   hcfs = " resume";
+				   break;
+			   case OHCI_USB_SUSPEND:
+				   hcfs = " suspend";
+				   break;
+			   default:
+				   hcfs = " ?";
+			   }
+			   hcfs;
+		   }));
+}
+
+static void dump_regs(struct seq_file *s, struct isp1362_hcd *isp1362_hcd)
+{
+	seq_printf(s, "HCREVISION [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCREVISION),
+		   isp1362_read_reg32(isp1362_hcd, HCREVISION));
+	seq_printf(s, "HCCONTROL  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCCONTROL),
+		   isp1362_read_reg32(isp1362_hcd, HCCONTROL));
+	seq_printf(s, "HCCMDSTAT  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCCMDSTAT),
+		   isp1362_read_reg32(isp1362_hcd, HCCMDSTAT));
+	seq_printf(s, "HCINTSTAT  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCINTSTAT),
+		   isp1362_read_reg32(isp1362_hcd, HCINTSTAT));
+	seq_printf(s, "HCINTENB   [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCINTENB),
+		   isp1362_read_reg32(isp1362_hcd, HCINTENB));
+	seq_printf(s, "HCFMINTVL  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCFMINTVL),
+		   isp1362_read_reg32(isp1362_hcd, HCFMINTVL));
+	seq_printf(s, "HCFMREM    [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCFMREM),
+		   isp1362_read_reg32(isp1362_hcd, HCFMREM));
+	seq_printf(s, "HCFMNUM    [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCFMNUM),
+		   isp1362_read_reg32(isp1362_hcd, HCFMNUM));
+	seq_printf(s, "HCLSTHRESH [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCLSTHRESH),
+		   isp1362_read_reg32(isp1362_hcd, HCLSTHRESH));
+	seq_printf(s, "HCRHDESCA  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCRHDESCA),
+		   isp1362_read_reg32(isp1362_hcd, HCRHDESCA));
+	seq_printf(s, "HCRHDESCB  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCRHDESCB),
+		   isp1362_read_reg32(isp1362_hcd, HCRHDESCB));
+	seq_printf(s, "HCRHSTATUS [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCRHSTATUS),
+		   isp1362_read_reg32(isp1362_hcd, HCRHSTATUS));
+	seq_printf(s, "HCRHPORT1  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCRHPORT1),
+		   isp1362_read_reg32(isp1362_hcd, HCRHPORT1));
+	seq_printf(s, "HCRHPORT2  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCRHPORT2),
+		   isp1362_read_reg32(isp1362_hcd, HCRHPORT2));
+	seq_printf(s, "\n");
+	seq_printf(s, "HCHWCFG    [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCHWCFG),
+		   isp1362_read_reg16(isp1362_hcd, HCHWCFG));
+	seq_printf(s, "HCDMACFG   [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCDMACFG),
+		   isp1362_read_reg16(isp1362_hcd, HCDMACFG));
+	seq_printf(s, "HCXFERCTR  [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCXFERCTR),
+		   isp1362_read_reg16(isp1362_hcd, HCXFERCTR));
+	seq_printf(s, "HCuPINT    [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCuPINT),
+		   isp1362_read_reg16(isp1362_hcd, HCuPINT));
+	seq_printf(s, "HCuPINTENB [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCuPINTENB),
+		   isp1362_read_reg16(isp1362_hcd, HCuPINTENB));
+	seq_printf(s, "HCCHIPID   [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCCHIPID),
+		   isp1362_read_reg16(isp1362_hcd, HCCHIPID));
+	seq_printf(s, "HCSCRATCH  [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCSCRATCH),
+		   isp1362_read_reg16(isp1362_hcd, HCSCRATCH));
+	seq_printf(s, "HCBUFSTAT  [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCBUFSTAT),
+		   isp1362_read_reg16(isp1362_hcd, HCBUFSTAT));
+	seq_printf(s, "HCDIRADDR  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCDIRADDR),
+		   isp1362_read_reg32(isp1362_hcd, HCDIRADDR));
+#if 0
+	seq_printf(s, "HCDIRDATA  [%02x]     %04x\n", ISP1362_REG_NO(HCDIRDATA),
+		   isp1362_read_reg16(isp1362_hcd, HCDIRDATA));
+#endif
+	seq_printf(s, "HCISTLBUFSZ[%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCISTLBUFSZ),
+		   isp1362_read_reg16(isp1362_hcd, HCISTLBUFSZ));
+	seq_printf(s, "HCISTLRATE [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCISTLRATE),
+		   isp1362_read_reg16(isp1362_hcd, HCISTLRATE));
+	seq_printf(s, "\n");
+	seq_printf(s, "HCINTLBUFSZ[%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLBUFSZ),
+		   isp1362_read_reg16(isp1362_hcd, HCINTLBUFSZ));
+	seq_printf(s, "HCINTLBLKSZ[%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLBLKSZ),
+		   isp1362_read_reg16(isp1362_hcd, HCINTLBLKSZ));
+	seq_printf(s, "HCINTLDONE [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLDONE),
+		   isp1362_read_reg32(isp1362_hcd, HCINTLDONE));
+	seq_printf(s, "HCINTLSKIP [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLSKIP),
+		   isp1362_read_reg32(isp1362_hcd, HCINTLSKIP));
+	seq_printf(s, "HCINTLLAST [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLLAST),
+		   isp1362_read_reg32(isp1362_hcd, HCINTLLAST));
+	seq_printf(s, "HCINTLCURR [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLCURR),
+		   isp1362_read_reg16(isp1362_hcd, HCINTLCURR));
+	seq_printf(s, "\n");
+	seq_printf(s, "HCATLBUFSZ [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCATLBUFSZ),
+		   isp1362_read_reg16(isp1362_hcd, HCATLBUFSZ));
+	seq_printf(s, "HCATLBLKSZ [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCATLBLKSZ),
+		   isp1362_read_reg16(isp1362_hcd, HCATLBLKSZ));
+#if 0
+	seq_printf(s, "HCATLDONE  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCATLDONE),
+		   isp1362_read_reg32(isp1362_hcd, HCATLDONE));
+#endif
+	seq_printf(s, "HCATLSKIP  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCATLSKIP),
+		   isp1362_read_reg32(isp1362_hcd, HCATLSKIP));
+	seq_printf(s, "HCATLLAST  [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCATLLAST),
+		   isp1362_read_reg32(isp1362_hcd, HCATLLAST));
+	seq_printf(s, "HCATLCURR  [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCATLCURR),
+		   isp1362_read_reg16(isp1362_hcd, HCATLCURR));
+	seq_printf(s, "\n");
+	seq_printf(s, "HCATLDTC   [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCATLDTC),
+		   isp1362_read_reg16(isp1362_hcd, HCATLDTC));
+	seq_printf(s, "HCATLDTCTO [%02x]     %04x\n", ISP1362_REG_NO(ISP1362_REG_HCATLDTCTO),
+		   isp1362_read_reg16(isp1362_hcd, HCATLDTCTO));
+}
+
+static int isp1362_show(struct seq_file *s, void *unused)
+{
+	struct isp1362_hcd *isp1362_hcd = s->private;
+	struct isp1362_ep *ep;
+	int i;
+
+	seq_printf(s, "%s\n%s version %s\n",
+		   isp1362_hcd_to_hcd(isp1362_hcd)->product_desc, hcd_name, DRIVER_VERSION);
+
+	/* collect statistics to help estimate potential win for
+	 * DMA engines that care about alignment (PXA)
+	 */
+	seq_printf(s, "alignment:  16b/%ld 8b/%ld 4b/%ld 2b/%ld 1b/%ld\n",
+		   isp1362_hcd->stat16, isp1362_hcd->stat8, isp1362_hcd->stat4,
+		   isp1362_hcd->stat2, isp1362_hcd->stat1);
+	seq_printf(s, "max # ptds in ATL  fifo: %d\n", isp1362_hcd->atl_queue.stat_maxptds);
+	seq_printf(s, "max # ptds in INTL fifo: %d\n", isp1362_hcd->intl_queue.stat_maxptds);
+	seq_printf(s, "max # ptds in ISTL fifo: %d\n",
+		   max(isp1362_hcd->istl_queue[0] .stat_maxptds,
+		       isp1362_hcd->istl_queue[1] .stat_maxptds));
+
+	/* FIXME: don't show the following in suspended state */
+	spin_lock_irq(&isp1362_hcd->lock);
+
+	dump_irq(s, "hc_irq_enable", isp1362_read_reg16(isp1362_hcd, HCuPINTENB));
+	dump_irq(s, "hc_irq_status", isp1362_read_reg16(isp1362_hcd, HCuPINT));
+	dump_int(s, "ohci_int_enable", isp1362_read_reg32(isp1362_hcd, HCINTENB));
+	dump_int(s, "ohci_int_status", isp1362_read_reg32(isp1362_hcd, HCINTSTAT));
+	dump_ctrl(s, "ohci_control", isp1362_read_reg32(isp1362_hcd, HCCONTROL));
+
+	for (i = 0; i < NUM_ISP1362_IRQS; i++)
+		if (isp1362_hcd->irq_stat[i])
+			seq_printf(s, "%-15s: %d\n",
+				   ISP1362_INT_NAME(i), isp1362_hcd->irq_stat[i]);
+
+	dump_regs(s, isp1362_hcd);
+	list_for_each_entry(ep, &isp1362_hcd->async, schedule) {
+		struct urb *urb;
+
+		seq_printf(s, "%p, ep%d%s, maxpacket %d:\n", ep, ep->epnum,
+			   ({
+				   char *s;
+				   switch (ep->nextpid) {
+				   case USB_PID_IN:
+					   s = "in";
+					   break;
+				   case USB_PID_OUT:
+					   s = "out";
+					   break;
+				   case USB_PID_SETUP:
+					   s = "setup";
+					   break;
+				   case USB_PID_ACK:
+					   s = "status";
+					   break;
+				   default:
+					   s = "?";
+					   break;
+				   }
+				   s;}), ep->maxpacket) ;
+		list_for_each_entry(urb, &ep->hep->urb_list, urb_list) {
+			seq_printf(s, "  urb%p, %d/%d\n", urb,
+				   urb->actual_length,
+				   urb->transfer_buffer_length);
+		}
+	}
+	if (!list_empty(&isp1362_hcd->async))
+		seq_printf(s, "\n");
+	dump_ptd_queue(&isp1362_hcd->atl_queue);
+
+	seq_printf(s, "periodic size= %d\n", PERIODIC_SIZE);
+
+	list_for_each_entry(ep, &isp1362_hcd->periodic, schedule) {
+		seq_printf(s, "branch:%2d load:%3d PTD[%d] $%04x:\n", ep->branch,
+			   isp1362_hcd->load[ep->branch], ep->ptd_index, ep->ptd_offset);
+
+		seq_printf(s, "   %d/%p (%sdev%d ep%d%s max %d)\n",
+			   ep->interval, ep,
+			   (ep->udev->speed == USB_SPEED_FULL) ? "" : "ls ",
+			   ep->udev->devnum, ep->epnum,
+			   (ep->epnum == 0) ? "" :
+			   ((ep->nextpid == USB_PID_IN) ?
+			    "in" : "out"), ep->maxpacket);
+	}
+	dump_ptd_queue(&isp1362_hcd->intl_queue);
+
+	seq_printf(s, "ISO:\n");
+
+	list_for_each_entry(ep, &isp1362_hcd->isoc, schedule) {
+		seq_printf(s, "   %d/%p (%sdev%d ep%d%s max %d)\n",
+			   ep->interval, ep,
+			   (ep->udev->speed == USB_SPEED_FULL) ? "" : "ls ",
+			   ep->udev->devnum, ep->epnum,
+			   (ep->epnum == 0) ? "" :
+			   ((ep->nextpid == USB_PID_IN) ?
+			    "in" : "out"), ep->maxpacket);
+	}
+
+	spin_unlock_irq(&isp1362_hcd->lock);
+	seq_printf(s, "\n");
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(isp1362);
+
+/* expect just one isp1362_hcd per system */
+static void create_debug_file(struct isp1362_hcd *isp1362_hcd)
+{
+	debugfs_create_file("isp1362", S_IRUGO, usb_debug_root, isp1362_hcd,
+			    &isp1362_fops);
+}
+
+static void remove_debug_file(struct isp1362_hcd *isp1362_hcd)
+{
+	debugfs_lookup_and_remove("isp1362", usb_debug_root);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void __isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
+{
+	int tmp = 20;
+
+	isp1362_write_reg16(isp1362_hcd, HCSWRES, HCSWRES_MAGIC);
+	isp1362_write_reg32(isp1362_hcd, HCCMDSTAT, OHCI_HCR);
+	while (--tmp) {
+		mdelay(1);
+		if (!(isp1362_read_reg32(isp1362_hcd, HCCMDSTAT) & OHCI_HCR))
+			break;
+	}
+	if (!tmp)
+		pr_err("Software reset timeout\n");
+}
+
+static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	__isp1362_sw_reset(isp1362_hcd);
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+}
+
+static int isp1362_mem_config(struct usb_hcd *hcd)
+{
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	unsigned long flags;
+	u32 total;
+	u16 istl_size = ISP1362_ISTL_BUFSIZE;
+	u16 intl_blksize = ISP1362_INTL_BLKSIZE + PTD_HEADER_SIZE;
+	u16 intl_size = ISP1362_INTL_BUFFERS * intl_blksize;
+	u16 atl_blksize = ISP1362_ATL_BLKSIZE + PTD_HEADER_SIZE;
+	u16 atl_buffers = (ISP1362_BUF_SIZE - (istl_size + intl_size)) / atl_blksize;
+	u16 atl_size;
+	int i;
+
+	WARN_ON(istl_size & 3);
+	WARN_ON(atl_blksize & 3);
+	WARN_ON(intl_blksize & 3);
+	WARN_ON(atl_blksize < PTD_HEADER_SIZE);
+	WARN_ON(intl_blksize < PTD_HEADER_SIZE);
+
+	BUG_ON((unsigned)ISP1362_INTL_BUFFERS > 32);
+	if (atl_buffers > 32)
+		atl_buffers = 32;
+	atl_size = atl_buffers * atl_blksize;
+	total = atl_size + intl_size + istl_size;
+	dev_info(hcd->self.controller, "ISP1362 Memory usage:\n");
+	dev_info(hcd->self.controller, "  ISTL:    2 * %4d:     %4d @ $%04x:$%04x\n",
+		 istl_size / 2, istl_size, 0, istl_size / 2);
+	dev_info(hcd->self.controller, "  INTL: %4d * (%3zu+8):  %4d @ $%04x\n",
+		 ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE,
+		 intl_size, istl_size);
+	dev_info(hcd->self.controller, "  ATL : %4d * (%3zu+8):  %4d @ $%04x\n",
+		 atl_buffers, atl_blksize - PTD_HEADER_SIZE,
+		 atl_size, istl_size + intl_size);
+	dev_info(hcd->self.controller, "  USED/FREE:   %4d      %4d\n", total,
+		 ISP1362_BUF_SIZE - total);
+
+	if (total > ISP1362_BUF_SIZE) {
+		dev_err(hcd->self.controller, "%s: Memory requested: %d, available %d\n",
+			__func__, total, ISP1362_BUF_SIZE);
+		return -ENOMEM;
+	}
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+
+	for (i = 0; i < 2; i++) {
+		isp1362_hcd->istl_queue[i].buf_start = i * istl_size / 2,
+		isp1362_hcd->istl_queue[i].buf_size = istl_size / 2;
+		isp1362_hcd->istl_queue[i].blk_size = 4;
+		INIT_LIST_HEAD(&isp1362_hcd->istl_queue[i].active);
+		snprintf(isp1362_hcd->istl_queue[i].name,
+			 sizeof(isp1362_hcd->istl_queue[i].name), "ISTL%d", i);
+		DBG(3, "%s: %5s buf $%04x %d\n", __func__,
+		     isp1362_hcd->istl_queue[i].name,
+		     isp1362_hcd->istl_queue[i].buf_start,
+		     isp1362_hcd->istl_queue[i].buf_size);
+	}
+	isp1362_write_reg16(isp1362_hcd, HCISTLBUFSZ, istl_size / 2);
+
+	isp1362_hcd->intl_queue.buf_start = istl_size;
+	isp1362_hcd->intl_queue.buf_size = intl_size;
+	isp1362_hcd->intl_queue.buf_count = ISP1362_INTL_BUFFERS;
+	isp1362_hcd->intl_queue.blk_size = intl_blksize;
+	isp1362_hcd->intl_queue.buf_avail = isp1362_hcd->intl_queue.buf_count;
+	isp1362_hcd->intl_queue.skip_map = ~0;
+	INIT_LIST_HEAD(&isp1362_hcd->intl_queue.active);
+
+	isp1362_write_reg16(isp1362_hcd, HCINTLBUFSZ,
+			    isp1362_hcd->intl_queue.buf_size);
+	isp1362_write_reg16(isp1362_hcd, HCINTLBLKSZ,
+			    isp1362_hcd->intl_queue.blk_size - PTD_HEADER_SIZE);
+	isp1362_write_reg32(isp1362_hcd, HCINTLSKIP, ~0);
+	isp1362_write_reg32(isp1362_hcd, HCINTLLAST,
+			    1 << (ISP1362_INTL_BUFFERS - 1));
+
+	isp1362_hcd->atl_queue.buf_start = istl_size + intl_size;
+	isp1362_hcd->atl_queue.buf_size = atl_size;
+	isp1362_hcd->atl_queue.buf_count = atl_buffers;
+	isp1362_hcd->atl_queue.blk_size = atl_blksize;
+	isp1362_hcd->atl_queue.buf_avail = isp1362_hcd->atl_queue.buf_count;
+	isp1362_hcd->atl_queue.skip_map = ~0;
+	INIT_LIST_HEAD(&isp1362_hcd->atl_queue.active);
+
+	isp1362_write_reg16(isp1362_hcd, HCATLBUFSZ,
+			    isp1362_hcd->atl_queue.buf_size);
+	isp1362_write_reg16(isp1362_hcd, HCATLBLKSZ,
+			    isp1362_hcd->atl_queue.blk_size - PTD_HEADER_SIZE);
+	isp1362_write_reg32(isp1362_hcd, HCATLSKIP, ~0);
+	isp1362_write_reg32(isp1362_hcd, HCATLLAST,
+			    1 << (atl_buffers - 1));
+
+	snprintf(isp1362_hcd->atl_queue.name,
+		 sizeof(isp1362_hcd->atl_queue.name), "ATL");
+	snprintf(isp1362_hcd->intl_queue.name,
+		 sizeof(isp1362_hcd->intl_queue.name), "INTL");
+	DBG(3, "%s: %5s buf $%04x %2d * %4d = %4d\n", __func__,
+	     isp1362_hcd->intl_queue.name,
+	     isp1362_hcd->intl_queue.buf_start,
+	     ISP1362_INTL_BUFFERS, isp1362_hcd->intl_queue.blk_size,
+	     isp1362_hcd->intl_queue.buf_size);
+	DBG(3, "%s: %5s buf $%04x %2d * %4d = %4d\n", __func__,
+	     isp1362_hcd->atl_queue.name,
+	     isp1362_hcd->atl_queue.buf_start,
+	     atl_buffers, isp1362_hcd->atl_queue.blk_size,
+	     isp1362_hcd->atl_queue.buf_size);
+
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+	return 0;
+}
+
+static int isp1362_hc_reset(struct usb_hcd *hcd)
+{
+	int ret = 0;
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	unsigned long t;
+	unsigned long timeout = 100;
+	unsigned long flags;
+	int clkrdy = 0;
+
+	pr_debug("%s:\n", __func__);
+
+	if (isp1362_hcd->board && isp1362_hcd->board->reset) {
+		isp1362_hcd->board->reset(hcd->self.controller, 1);
+		msleep(20);
+		if (isp1362_hcd->board->clock)
+			isp1362_hcd->board->clock(hcd->self.controller, 1);
+		isp1362_hcd->board->reset(hcd->self.controller, 0);
+	} else
+		isp1362_sw_reset(isp1362_hcd);
+
+	/* chip has been reset. First we need to see a clock */
+	t = jiffies + msecs_to_jiffies(timeout);
+	while (!clkrdy && time_before_eq(jiffies, t)) {
+		spin_lock_irqsave(&isp1362_hcd->lock, flags);
+		clkrdy = isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_CLKRDY;
+		spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+		if (!clkrdy)
+			msleep(4);
+	}
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_CLKRDY);
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+	if (!clkrdy) {
+		pr_err("Clock not ready after %lums\n", timeout);
+		ret = -ENODEV;
+	}
+	return ret;
+}
+
+static void isp1362_hc_stop(struct usb_hcd *hcd)
+{
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	unsigned long flags;
+	u32 tmp;
+
+	pr_debug("%s:\n", __func__);
+
+	del_timer_sync(&hcd->rh_timer);
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+
+	isp1362_write_reg16(isp1362_hcd, HCuPINTENB, 0);
+
+	/* Switch off power for all ports */
+	tmp = isp1362_read_reg32(isp1362_hcd, HCRHDESCA);
+	tmp &= ~(RH_A_NPS | RH_A_PSM);
+	isp1362_write_reg32(isp1362_hcd, HCRHDESCA, tmp);
+	isp1362_write_reg32(isp1362_hcd, HCRHSTATUS, RH_HS_LPS);
+
+	/* Reset the chip */
+	if (isp1362_hcd->board && isp1362_hcd->board->reset)
+		isp1362_hcd->board->reset(hcd->self.controller, 1);
+	else
+		__isp1362_sw_reset(isp1362_hcd);
+
+	if (isp1362_hcd->board && isp1362_hcd->board->clock)
+		isp1362_hcd->board->clock(hcd->self.controller, 0);
+
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+}
+
+#ifdef CHIP_BUFFER_TEST
+static int isp1362_chip_test(struct isp1362_hcd *isp1362_hcd)
+{
+	int ret = 0;
+	u16 *ref;
+	unsigned long flags;
+
+	ref = kmalloc(2 * ISP1362_BUF_SIZE, GFP_KERNEL);
+	if (ref) {
+		int offset;
+		u16 *tst = &ref[ISP1362_BUF_SIZE / 2];
+
+		for (offset = 0; offset < ISP1362_BUF_SIZE / 2; offset++) {
+			ref[offset] = ~offset;
+			tst[offset] = offset;
+		}
+
+		for (offset = 0; offset < 4; offset++) {
+			int j;
+
+			for (j = 0; j < 8; j++) {
+				spin_lock_irqsave(&isp1362_hcd->lock, flags);
+				isp1362_write_buffer(isp1362_hcd, (u8 *)ref + offset, 0, j);
+				isp1362_read_buffer(isp1362_hcd, (u8 *)tst + offset, 0, j);
+				spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+				if (memcmp(ref, tst, j)) {
+					ret = -ENODEV;
+					pr_err("%s: memory check with %d byte offset %d failed\n",
+					    __func__, j, offset);
+					dump_data((u8 *)ref + offset, j);
+					dump_data((u8 *)tst + offset, j);
+				}
+			}
+		}
+
+		spin_lock_irqsave(&isp1362_hcd->lock, flags);
+		isp1362_write_buffer(isp1362_hcd, ref, 0, ISP1362_BUF_SIZE);
+		isp1362_read_buffer(isp1362_hcd, tst, 0, ISP1362_BUF_SIZE);
+		spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+		if (memcmp(ref, tst, ISP1362_BUF_SIZE)) {
+			ret = -ENODEV;
+			pr_err("%s: memory check failed\n", __func__);
+			dump_data((u8 *)tst, ISP1362_BUF_SIZE / 2);
+		}
+
+		for (offset = 0; offset < 256; offset++) {
+			int test_size = 0;
+
+			yield();
+
+			memset(tst, 0, ISP1362_BUF_SIZE);
+			spin_lock_irqsave(&isp1362_hcd->lock, flags);
+			isp1362_write_buffer(isp1362_hcd, tst, 0, ISP1362_BUF_SIZE);
+			isp1362_read_buffer(isp1362_hcd, tst, 0, ISP1362_BUF_SIZE);
+			spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+			if (memcmp(tst, tst + (ISP1362_BUF_SIZE / (2 * sizeof(*tst))),
+				   ISP1362_BUF_SIZE / 2)) {
+				pr_err("%s: Failed to clear buffer\n", __func__);
+				dump_data((u8 *)tst, ISP1362_BUF_SIZE);
+				break;
+			}
+			spin_lock_irqsave(&isp1362_hcd->lock, flags);
+			isp1362_write_buffer(isp1362_hcd, ref, offset * 2, PTD_HEADER_SIZE);
+			isp1362_write_buffer(isp1362_hcd, ref + PTD_HEADER_SIZE / sizeof(*ref),
+					     offset * 2 + PTD_HEADER_SIZE, test_size);
+			isp1362_read_buffer(isp1362_hcd, tst, offset * 2,
+					    PTD_HEADER_SIZE + test_size);
+			spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+			if (memcmp(ref, tst, PTD_HEADER_SIZE + test_size)) {
+				dump_data(((u8 *)ref) + offset, PTD_HEADER_SIZE + test_size);
+				dump_data((u8 *)tst, PTD_HEADER_SIZE + test_size);
+				spin_lock_irqsave(&isp1362_hcd->lock, flags);
+				isp1362_read_buffer(isp1362_hcd, tst, offset * 2,
+						    PTD_HEADER_SIZE + test_size);
+				spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+				if (memcmp(ref, tst, PTD_HEADER_SIZE + test_size)) {
+					ret = -ENODEV;
+					pr_err("%s: memory check with offset %02x failed\n",
+					    __func__, offset);
+					break;
+				}
+				pr_warn("%s: memory check with offset %02x ok after second read\n",
+					__func__, offset);
+			}
+		}
+		kfree(ref);
+	}
+	return ret;
+}
+#endif
+
+static int isp1362_hc_start(struct usb_hcd *hcd)
+{
+	int ret;
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	struct isp1362_platform_data *board = isp1362_hcd->board;
+	u16 hwcfg;
+	u16 chipid;
+	unsigned long flags;
+
+	pr_debug("%s:\n", __func__);
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	chipid = isp1362_read_reg16(isp1362_hcd, HCCHIPID);
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+	if ((chipid & HCCHIPID_MASK) != HCCHIPID_MAGIC) {
+		pr_err("%s: Invalid chip ID %04x\n", __func__, chipid);
+		return -ENODEV;
+	}
+
+#ifdef CHIP_BUFFER_TEST
+	ret = isp1362_chip_test(isp1362_hcd);
+	if (ret)
+		return -ENODEV;
+#endif
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	/* clear interrupt status and disable all interrupt sources */
+	isp1362_write_reg16(isp1362_hcd, HCuPINT, 0xff);
+	isp1362_write_reg16(isp1362_hcd, HCuPINTENB, 0);
+
+	/* HW conf */
+	hwcfg = HCHWCFG_INT_ENABLE | HCHWCFG_DBWIDTH(1);
+	if (board->sel15Kres)
+		hwcfg |= HCHWCFG_PULLDOWN_DS2 |
+			((MAX_ROOT_PORTS > 1) ? HCHWCFG_PULLDOWN_DS1 : 0);
+	if (board->clknotstop)
+		hwcfg |= HCHWCFG_CLKNOTSTOP;
+	if (board->oc_enable)
+		hwcfg |= HCHWCFG_ANALOG_OC;
+	if (board->int_act_high)
+		hwcfg |= HCHWCFG_INT_POL;
+	if (board->int_edge_triggered)
+		hwcfg |= HCHWCFG_INT_TRIGGER;
+	if (board->dreq_act_high)
+		hwcfg |= HCHWCFG_DREQ_POL;
+	if (board->dack_act_high)
+		hwcfg |= HCHWCFG_DACK_POL;
+	isp1362_write_reg16(isp1362_hcd, HCHWCFG, hwcfg);
+	isp1362_show_reg(isp1362_hcd, HCHWCFG);
+	isp1362_write_reg16(isp1362_hcd, HCDMACFG, 0);
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+	ret = isp1362_mem_config(hcd);
+	if (ret)
+		return ret;
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+
+	/* Root hub conf */
+	isp1362_hcd->rhdesca = 0;
+	if (board->no_power_switching)
+		isp1362_hcd->rhdesca |= RH_A_NPS;
+	if (board->power_switching_mode)
+		isp1362_hcd->rhdesca |= RH_A_PSM;
+	if (board->potpg)
+		isp1362_hcd->rhdesca |= (board->potpg << 24) & RH_A_POTPGT;
+	else
+		isp1362_hcd->rhdesca |= (25 << 24) & RH_A_POTPGT;
+
+	isp1362_write_reg32(isp1362_hcd, HCRHDESCA, isp1362_hcd->rhdesca & ~RH_A_OCPM);
+	isp1362_write_reg32(isp1362_hcd, HCRHDESCA, isp1362_hcd->rhdesca | RH_A_OCPM);
+	isp1362_hcd->rhdesca = isp1362_read_reg32(isp1362_hcd, HCRHDESCA);
+
+	isp1362_hcd->rhdescb = RH_B_PPCM;
+	isp1362_write_reg32(isp1362_hcd, HCRHDESCB, isp1362_hcd->rhdescb);
+	isp1362_hcd->rhdescb = isp1362_read_reg32(isp1362_hcd, HCRHDESCB);
+
+	isp1362_read_reg32(isp1362_hcd, HCFMINTVL);
+	isp1362_write_reg32(isp1362_hcd, HCFMINTVL, (FSMP(FI) << 16) | FI);
+	isp1362_write_reg32(isp1362_hcd, HCLSTHRESH, LSTHRESH);
+
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+	isp1362_hcd->hc_control = OHCI_USB_OPER;
+	hcd->state = HC_STATE_RUNNING;
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	/* Set up interrupts */
+	isp1362_hcd->intenb = OHCI_INTR_MIE | OHCI_INTR_RHSC | OHCI_INTR_UE;
+	isp1362_hcd->intenb |= OHCI_INTR_RD;
+	isp1362_hcd->irqenb = HCuPINT_OPR | HCuPINT_SUSP;
+	isp1362_write_reg32(isp1362_hcd, HCINTENB, isp1362_hcd->intenb);
+	isp1362_write_reg16(isp1362_hcd, HCuPINTENB, isp1362_hcd->irqenb);
+
+	/* Go operational */
+	isp1362_write_reg32(isp1362_hcd, HCCONTROL, isp1362_hcd->hc_control);
+	/* enable global power */
+	isp1362_write_reg32(isp1362_hcd, HCRHSTATUS, RH_HS_LPSC | RH_HS_DRWE);
+
+	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct hc_driver isp1362_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"ISP1362 Host Controller",
+	.hcd_priv_size =	sizeof(struct isp1362_hcd),
+
+	.irq =			isp1362_irq,
+	.flags =		HCD_USB11 | HCD_MEMORY,
+
+	.reset =		isp1362_hc_reset,
+	.start =		isp1362_hc_start,
+	.stop =			isp1362_hc_stop,
+
+	.urb_enqueue =		isp1362_urb_enqueue,
+	.urb_dequeue =		isp1362_urb_dequeue,
+	.endpoint_disable =	isp1362_endpoint_disable,
+
+	.get_frame_number =	isp1362_get_frame,
+
+	.hub_status_data =	isp1362_hub_status_data,
+	.hub_control =		isp1362_hub_control,
+	.bus_suspend =		isp1362_bus_suspend,
+	.bus_resume =		isp1362_bus_resume,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int isp1362_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+
+	remove_debug_file(isp1362_hcd);
+	DBG(0, "%s: Removing HCD\n", __func__);
+	usb_remove_hcd(hcd);
+	DBG(0, "%s: put_hcd\n", __func__);
+	usb_put_hcd(hcd);
+	DBG(0, "%s: Done\n", __func__);
+
+	return 0;
+}
+
+static int isp1362_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct isp1362_hcd *isp1362_hcd;
+	struct resource *data, *irq_res;
+	void __iomem *addr_reg;
+	void __iomem *data_reg;
+	int irq;
+	int retval = 0;
+	unsigned int irq_flags = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	/* basic sanity checks first.  board-specific init logic should
+	 * have initialized this the three resources and probably board
+	 * specific platform_data.  we don't probe for IRQs, and do only
+	 * minimal sanity checking.
+	 */
+	if (pdev->num_resources < 3)
+		return -ENODEV;
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq_res)
+		return -ENODEV;
+
+	irq = irq_res->start;
+
+	addr_reg = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(addr_reg))
+		return PTR_ERR(addr_reg);
+
+	data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data_reg = devm_ioremap_resource(&pdev->dev, data);
+	if (IS_ERR(data_reg))
+		return PTR_ERR(data_reg);
+
+	/* allocate and initialize hcd */
+	hcd = usb_create_hcd(&isp1362_hc_driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	hcd->rsrc_start = data->start;
+	isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	isp1362_hcd->data_reg = data_reg;
+	isp1362_hcd->addr_reg = addr_reg;
+
+	isp1362_hcd->next_statechange = jiffies;
+	spin_lock_init(&isp1362_hcd->lock);
+	INIT_LIST_HEAD(&isp1362_hcd->async);
+	INIT_LIST_HEAD(&isp1362_hcd->periodic);
+	INIT_LIST_HEAD(&isp1362_hcd->isoc);
+	INIT_LIST_HEAD(&isp1362_hcd->remove_list);
+	isp1362_hcd->board = dev_get_platdata(&pdev->dev);
+#if USE_PLATFORM_DELAY
+	if (!isp1362_hcd->board->delay) {
+		dev_err(hcd->self.controller, "No platform delay function given\n");
+		retval = -ENODEV;
+		goto err;
+	}
+#endif
+
+	if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE)
+		irq_flags |= IRQF_TRIGGER_RISING;
+	if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE)
+		irq_flags |= IRQF_TRIGGER_FALLING;
+	if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL)
+		irq_flags |= IRQF_TRIGGER_HIGH;
+	if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL)
+		irq_flags |= IRQF_TRIGGER_LOW;
+
+	retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_SHARED);
+	if (retval != 0)
+		goto err;
+	device_wakeup_enable(hcd->self.controller);
+
+	dev_info(&pdev->dev, "%s, irq %d\n", hcd->product_desc, irq);
+
+	create_debug_file(isp1362_hcd);
+
+	return 0;
+
+ err:
+	usb_put_hcd(hcd);
+
+	return retval;
+}
+
+#ifdef	CONFIG_PM
+static int isp1362_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	unsigned long flags;
+	int retval = 0;
+
+	DBG(0, "%s: Suspending device\n", __func__);
+
+	if (state.event == PM_EVENT_FREEZE) {
+		DBG(0, "%s: Suspending root hub\n", __func__);
+		retval = isp1362_bus_suspend(hcd);
+	} else {
+		DBG(0, "%s: Suspending RH ports\n", __func__);
+		spin_lock_irqsave(&isp1362_hcd->lock, flags);
+		isp1362_write_reg32(isp1362_hcd, HCRHSTATUS, RH_HS_LPS);
+		spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+	}
+	if (retval == 0)
+		pdev->dev.power.power_state = state;
+	return retval;
+}
+
+static int isp1362_resume(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
+	unsigned long flags;
+
+	DBG(0, "%s: Resuming\n", __func__);
+
+	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+		DBG(0, "%s: Resume RH ports\n", __func__);
+		spin_lock_irqsave(&isp1362_hcd->lock, flags);
+		isp1362_write_reg32(isp1362_hcd, HCRHSTATUS, RH_HS_LPSC);
+		spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+		return 0;
+	}
+
+	pdev->dev.power.power_state = PMSG_ON;
+
+	return isp1362_bus_resume(isp1362_hcd_to_hcd(isp1362_hcd));
+}
+#else
+#define	isp1362_suspend	NULL
+#define	isp1362_resume	NULL
+#endif
+
+static struct platform_driver isp1362_driver = {
+	.probe = isp1362_probe,
+	.remove = isp1362_remove,
+
+	.suspend = isp1362_suspend,
+	.resume = isp1362_resume,
+	.driver = {
+		.name = hcd_name,
+	},
+};
+
+module_platform_driver(isp1362_driver);
diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h
new file mode 100644
index 000000000..74ca4be24
--- /dev/null
+++ b/drivers/usb/host/isp1362.h
@@ -0,0 +1,914 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ISP1362 HCD (Host Controller Driver) for USB.
+ *
+ * COPYRIGHT (C) by L. Wassmann <LW@KARO-electronics.de>
+ */
+
+/* ------------------------------------------------------------------------- */
+
+#define MAX_ROOT_PORTS		2
+
+#define USE_32BIT		0
+
+/* These options are mutually exclusive */
+#define USE_PLATFORM_DELAY	0
+#define USE_NDELAY		0
+
+#define DUMMY_DELAY_ACCESS do {} while (0)
+
+/* ------------------------------------------------------------------------- */
+
+#define USB_RESET_WIDTH			50
+#define MAX_XFER_SIZE			1023
+
+/* Buffer sizes */
+#define ISP1362_BUF_SIZE		4096
+#define ISP1362_ISTL_BUFSIZE		512
+#define ISP1362_INTL_BLKSIZE		64
+#define ISP1362_INTL_BUFFERS		16
+#define ISP1362_ATL_BLKSIZE		64
+
+#define ISP1362_REG_WRITE_OFFSET	0x80
+
+#define REG_WIDTH_16			0x000
+#define REG_WIDTH_32			0x100
+#define REG_WIDTH_MASK			0x100
+#define REG_NO_MASK			0x0ff
+
+#ifdef ISP1362_DEBUG
+typedef const unsigned int isp1362_reg_t;
+
+#define REG_ACCESS_R			0x200
+#define REG_ACCESS_W			0x400
+#define REG_ACCESS_RW			0x600
+#define REG_ACCESS_MASK			0x600
+
+#define ISP1362_REG_NO(r)		((r) & REG_NO_MASK)
+
+#define ISP1362_REG(name, addr, width, rw) \
+static isp1362_reg_t ISP1362_REG_##name = ((addr) | (width) | (rw))
+
+#define REG_ACCESS_TEST(r)   BUG_ON(((r) & ISP1362_REG_WRITE_OFFSET) && !((r) & REG_ACCESS_W))
+#define REG_WIDTH_TEST(r, w) BUG_ON(((r) & REG_WIDTH_MASK) != (w))
+#else
+typedef const unsigned char isp1362_reg_t;
+#define ISP1362_REG_NO(r)		(r)
+
+#define ISP1362_REG(name, addr, width, rw) \
+static isp1362_reg_t __maybe_unused ISP1362_REG_##name = addr
+
+#define REG_ACCESS_TEST(r)		do {} while (0)
+#define REG_WIDTH_TEST(r, w)		do {} while (0)
+#endif
+
+/* OHCI compatible registers */
+/*
+ * Note: Some of the ISP1362 'OHCI' registers implement only
+ * a subset of the bits defined in the OHCI spec.
+ *
+ * Bitmasks for the individual bits of these registers are defined in "ohci.h"
+ */
+ISP1362_REG(HCREVISION,	0x00,	REG_WIDTH_32,	REG_ACCESS_R);
+ISP1362_REG(HCCONTROL,	0x01,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCCMDSTAT,	0x02,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCINTSTAT,	0x03,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCINTENB,	0x04,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCINTDIS,	0x05,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCFMINTVL,	0x0d,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCFMREM,	0x0e,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCFMNUM,	0x0f,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCLSTHRESH,	0x11,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCRHDESCA,	0x12,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCRHDESCB,	0x13,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCRHSTATUS,	0x14,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCRHPORT1,	0x15,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCRHPORT2,	0x16,	REG_WIDTH_32,	REG_ACCESS_RW);
+
+/* Philips ISP1362 specific registers */
+ISP1362_REG(HCHWCFG,	0x20,	REG_WIDTH_16,	REG_ACCESS_RW);
+#define HCHWCFG_DISABLE_SUSPEND	(1 << 15)
+#define HCHWCFG_GLOBAL_PWRDOWN	(1 << 14)
+#define HCHWCFG_PULLDOWN_DS2	(1 << 13)
+#define HCHWCFG_PULLDOWN_DS1	(1 << 12)
+#define HCHWCFG_CLKNOTSTOP	(1 << 11)
+#define HCHWCFG_ANALOG_OC	(1 << 10)
+#define HCHWCFG_ONEINT		(1 << 9)
+#define HCHWCFG_DACK_MODE	(1 << 8)
+#define HCHWCFG_ONEDMA		(1 << 7)
+#define HCHWCFG_DACK_POL	(1 << 6)
+#define HCHWCFG_DREQ_POL	(1 << 5)
+#define HCHWCFG_DBWIDTH_MASK	(0x03 << 3)
+#define HCHWCFG_DBWIDTH(n)	(((n) << 3) & HCHWCFG_DBWIDTH_MASK)
+#define HCHWCFG_INT_POL		(1 << 2)
+#define HCHWCFG_INT_TRIGGER	(1 << 1)
+#define HCHWCFG_INT_ENABLE	(1 << 0)
+
+ISP1362_REG(HCDMACFG,	0x21,	REG_WIDTH_16,	REG_ACCESS_RW);
+#define HCDMACFG_CTR_ENABLE	(1 << 7)
+#define HCDMACFG_BURST_LEN_MASK	(0x03 << 5)
+#define HCDMACFG_BURST_LEN(n)	(((n) << 5) & HCDMACFG_BURST_LEN_MASK)
+#define HCDMACFG_BURST_LEN_1	HCDMACFG_BURST_LEN(0)
+#define HCDMACFG_BURST_LEN_4	HCDMACFG_BURST_LEN(1)
+#define HCDMACFG_BURST_LEN_8	HCDMACFG_BURST_LEN(2)
+#define HCDMACFG_DMA_ENABLE	(1 << 4)
+#define HCDMACFG_BUF_TYPE_MASK	(0x07 << 1)
+#define HCDMACFG_BUF_TYPE(n)	(((n) << 1) & HCDMACFG_BUF_TYPE_MASK)
+#define HCDMACFG_BUF_ISTL0	HCDMACFG_BUF_TYPE(0)
+#define HCDMACFG_BUF_ISTL1	HCDMACFG_BUF_TYPE(1)
+#define HCDMACFG_BUF_INTL	HCDMACFG_BUF_TYPE(2)
+#define HCDMACFG_BUF_ATL	HCDMACFG_BUF_TYPE(3)
+#define HCDMACFG_BUF_DIRECT	HCDMACFG_BUF_TYPE(4)
+#define HCDMACFG_DMA_RW_SELECT	(1 << 0)
+
+ISP1362_REG(HCXFERCTR,	0x22,	REG_WIDTH_16,	REG_ACCESS_RW);
+
+ISP1362_REG(HCuPINT,	0x24,	REG_WIDTH_16,	REG_ACCESS_RW);
+#define HCuPINT_SOF		(1 << 0)
+#define HCuPINT_ISTL0		(1 << 1)
+#define HCuPINT_ISTL1		(1 << 2)
+#define HCuPINT_EOT		(1 << 3)
+#define HCuPINT_OPR		(1 << 4)
+#define HCuPINT_SUSP		(1 << 5)
+#define HCuPINT_CLKRDY		(1 << 6)
+#define HCuPINT_INTL		(1 << 7)
+#define HCuPINT_ATL		(1 << 8)
+#define HCuPINT_OTG		(1 << 9)
+
+ISP1362_REG(HCuPINTENB,	0x25,	REG_WIDTH_16,	REG_ACCESS_RW);
+/* same bit definitions apply as for HCuPINT */
+
+ISP1362_REG(HCCHIPID,	0x27,	REG_WIDTH_16,	REG_ACCESS_R);
+#define HCCHIPID_MASK		0xff00
+#define HCCHIPID_MAGIC		0x3600
+
+ISP1362_REG(HCSCRATCH,	0x28,	REG_WIDTH_16,	REG_ACCESS_RW);
+
+ISP1362_REG(HCSWRES,	0x29,	REG_WIDTH_16,	REG_ACCESS_W);
+#define HCSWRES_MAGIC		0x00f6
+
+ISP1362_REG(HCBUFSTAT,	0x2c,	REG_WIDTH_16,	REG_ACCESS_RW);
+#define HCBUFSTAT_ISTL0_FULL	(1 << 0)
+#define HCBUFSTAT_ISTL1_FULL	(1 << 1)
+#define HCBUFSTAT_INTL_ACTIVE	(1 << 2)
+#define HCBUFSTAT_ATL_ACTIVE	(1 << 3)
+#define HCBUFSTAT_RESET_HWPP	(1 << 4)
+#define HCBUFSTAT_ISTL0_ACTIVE	(1 << 5)
+#define HCBUFSTAT_ISTL1_ACTIVE	(1 << 6)
+#define HCBUFSTAT_ISTL0_DONE	(1 << 8)
+#define HCBUFSTAT_ISTL1_DONE	(1 << 9)
+#define HCBUFSTAT_PAIRED_PTDPP	(1 << 10)
+
+ISP1362_REG(HCDIRADDR,	0x32,	REG_WIDTH_32,	REG_ACCESS_RW);
+#define HCDIRADDR_ADDR_MASK	0x0000ffff
+#define HCDIRADDR_ADDR(n)	(((n) << 0) & HCDIRADDR_ADDR_MASK)
+#define HCDIRADDR_COUNT_MASK	0xffff0000
+#define HCDIRADDR_COUNT(n)	(((n) << 16) & HCDIRADDR_COUNT_MASK)
+ISP1362_REG(HCDIRDATA,	0x45,	REG_WIDTH_16,	REG_ACCESS_RW);
+
+ISP1362_REG(HCISTLBUFSZ, 0x30,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCISTL0PORT, 0x40,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCISTL1PORT, 0x42,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCISTLRATE,	0x47,	REG_WIDTH_16,	REG_ACCESS_RW);
+
+ISP1362_REG(HCINTLBUFSZ, 0x33,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCINTLPORT,	0x43,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCINTLBLKSZ, 0x53,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCINTLDONE,	0x17,	REG_WIDTH_32,	REG_ACCESS_R);
+ISP1362_REG(HCINTLSKIP,	0x18,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCINTLLAST,	0x19,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCINTLCURR,	0x1a,	REG_WIDTH_16,	REG_ACCESS_R);
+
+ISP1362_REG(HCATLBUFSZ, 0x34,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCATLPORT,	0x44,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCATLBLKSZ, 0x54,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCATLDONE,	0x1b,	REG_WIDTH_32,	REG_ACCESS_R);
+ISP1362_REG(HCATLSKIP,	0x1c,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCATLLAST,	0x1d,	REG_WIDTH_32,	REG_ACCESS_RW);
+ISP1362_REG(HCATLCURR,	0x1e,	REG_WIDTH_16,	REG_ACCESS_R);
+
+ISP1362_REG(HCATLDTC,	0x51,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(HCATLDTCTO,	0x52,	REG_WIDTH_16,	REG_ACCESS_RW);
+
+
+ISP1362_REG(OTGCONTROL,	0x62,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(OTGSTATUS,	0x67,	REG_WIDTH_16,	REG_ACCESS_R);
+ISP1362_REG(OTGINT,	0x68,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(OTGINTENB,	0x69,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(OTGTIMER,	0x6A,	REG_WIDTH_16,	REG_ACCESS_RW);
+ISP1362_REG(OTGALTTMR,	0x6C,	REG_WIDTH_16,	REG_ACCESS_RW);
+
+/* Philips transfer descriptor, cpu-endian */
+struct ptd {
+	u16 count;
+#define	PTD_COUNT_MSK	(0x3ff << 0)
+#define	PTD_TOGGLE_MSK	(1 << 10)
+#define	PTD_ACTIVE_MSK	(1 << 11)
+#define	PTD_CC_MSK	(0xf << 12)
+	u16 mps;
+#define	PTD_MPS_MSK	(0x3ff << 0)
+#define	PTD_SPD_MSK	(1 << 10)
+#define	PTD_LAST_MSK	(1 << 11)
+#define	PTD_EP_MSK	(0xf << 12)
+	u16 len;
+#define	PTD_LEN_MSK	(0x3ff << 0)
+#define	PTD_DIR_MSK	(3 << 10)
+#define	PTD_DIR_SETUP	(0)
+#define	PTD_DIR_OUT	(1)
+#define	PTD_DIR_IN	(2)
+	u16 faddr;
+#define	PTD_FA_MSK	(0x7f << 0)
+/* PTD Byte 7: [StartingFrame (if ISO PTD) | StartingFrame[0..4], PollingRate[0..2] (if INT PTD)] */
+#define PTD_SF_ISO_MSK	(0xff << 8)
+#define PTD_SF_INT_MSK	(0x1f << 8)
+#define PTD_PR_MSK	(0x07 << 13)
+} __attribute__ ((packed, aligned(2)));
+#define PTD_HEADER_SIZE sizeof(struct ptd)
+
+/* ------------------------------------------------------------------------- */
+/* Copied from ohci.h: */
+/*
+ * Hardware transfer status codes -- CC from PTD
+ */
+#define PTD_CC_NOERROR      0x00
+#define PTD_CC_CRC          0x01
+#define PTD_CC_BITSTUFFING  0x02
+#define PTD_CC_DATATOGGLEM  0x03
+#define PTD_CC_STALL        0x04
+#define PTD_DEVNOTRESP      0x05
+#define PTD_PIDCHECKFAIL    0x06
+#define PTD_UNEXPECTEDPID   0x07
+#define PTD_DATAOVERRUN     0x08
+#define PTD_DATAUNDERRUN    0x09
+    /* 0x0A, 0x0B reserved for hardware */
+#define PTD_BUFFEROVERRUN   0x0C
+#define PTD_BUFFERUNDERRUN  0x0D
+    /* 0x0E, 0x0F reserved for HCD */
+#define PTD_NOTACCESSED     0x0F
+
+
+/* map OHCI TD status codes (CC) to errno values */
+static const int cc_to_error[16] = {
+	/* No  Error  */               0,
+	/* CRC Error  */               -EILSEQ,
+	/* Bit Stuff  */               -EPROTO,
+	/* Data Togg  */               -EILSEQ,
+	/* Stall      */               -EPIPE,
+	/* DevNotResp */               -ETIMEDOUT,
+	/* PIDCheck   */               -EPROTO,
+	/* UnExpPID   */               -EPROTO,
+	/* DataOver   */               -EOVERFLOW,
+	/* DataUnder  */               -EREMOTEIO,
+	/* (for hw)   */               -EIO,
+	/* (for hw)   */               -EIO,
+	/* BufferOver */               -ECOMM,
+	/* BuffUnder  */               -ENOSR,
+	/* (for HCD)  */               -EALREADY,
+	/* (for HCD)  */               -EALREADY
+};
+
+
+/*
+ * HcControl (control) register masks
+ */
+#define OHCI_CTRL_HCFS	(3 << 6)	/* host controller functional state */
+#define OHCI_CTRL_RWC	(1 << 9)	/* remote wakeup connected */
+#define OHCI_CTRL_RWE	(1 << 10)	/* remote wakeup enable */
+
+/* pre-shifted values for HCFS */
+#	define OHCI_USB_RESET	(0 << 6)
+#	define OHCI_USB_RESUME	(1 << 6)
+#	define OHCI_USB_OPER	(2 << 6)
+#	define OHCI_USB_SUSPEND	(3 << 6)
+
+/*
+ * HcCommandStatus (cmdstatus) register masks
+ */
+#define OHCI_HCR	(1 << 0)	/* host controller reset */
+#define OHCI_SOC  	(3 << 16)	/* scheduling overrun count */
+
+/*
+ * masks used with interrupt registers:
+ * HcInterruptStatus (intrstatus)
+ * HcInterruptEnable (intrenable)
+ * HcInterruptDisable (intrdisable)
+ */
+#define OHCI_INTR_SO	(1 << 0)	/* scheduling overrun */
+#define OHCI_INTR_WDH	(1 << 1)	/* writeback of done_head */
+#define OHCI_INTR_SF	(1 << 2)	/* start frame */
+#define OHCI_INTR_RD	(1 << 3)	/* resume detect */
+#define OHCI_INTR_UE	(1 << 4)	/* unrecoverable error */
+#define OHCI_INTR_FNO	(1 << 5)	/* frame number overflow */
+#define OHCI_INTR_RHSC	(1 << 6)	/* root hub status change */
+#define OHCI_INTR_OC	(1 << 30)	/* ownership change */
+#define OHCI_INTR_MIE	(1 << 31)	/* master interrupt enable */
+
+/* roothub.portstatus [i] bits */
+#define RH_PS_CCS            0x00000001   	/* current connect status */
+#define RH_PS_PES            0x00000002   	/* port enable status*/
+#define RH_PS_PSS            0x00000004   	/* port suspend status */
+#define RH_PS_POCI           0x00000008   	/* port over current indicator */
+#define RH_PS_PRS            0x00000010  	/* port reset status */
+#define RH_PS_PPS            0x00000100   	/* port power status */
+#define RH_PS_LSDA           0x00000200    	/* low speed device attached */
+#define RH_PS_CSC            0x00010000 	/* connect status change */
+#define RH_PS_PESC           0x00020000   	/* port enable status change */
+#define RH_PS_PSSC           0x00040000    	/* port suspend status change */
+#define RH_PS_OCIC           0x00080000    	/* over current indicator change */
+#define RH_PS_PRSC           0x00100000   	/* port reset status change */
+
+/* roothub.status bits */
+#define RH_HS_LPS	     0x00000001		/* local power status */
+#define RH_HS_OCI	     0x00000002		/* over current indicator */
+#define RH_HS_DRWE	     0x00008000		/* device remote wakeup enable */
+#define RH_HS_LPSC	     0x00010000		/* local power status change */
+#define RH_HS_OCIC	     0x00020000		/* over current indicator change */
+#define RH_HS_CRWE	     0x80000000		/* clear remote wakeup enable */
+
+/* roothub.b masks */
+#define RH_B_DR		0x0000ffff		/* device removable flags */
+#define RH_B_PPCM	0xffff0000		/* port power control mask */
+
+/* roothub.a masks */
+#define	RH_A_NDP	(0xff << 0)		/* number of downstream ports */
+#define	RH_A_PSM	(1 << 8)		/* power switching mode */
+#define	RH_A_NPS	(1 << 9)		/* no power switching */
+#define	RH_A_DT		(1 << 10)		/* device type (mbz) */
+#define	RH_A_OCPM	(1 << 11)		/* over current protection mode */
+#define	RH_A_NOCP	(1 << 12)		/* no over current protection */
+#define	RH_A_POTPGT	(0xff << 24)		/* power on to power good time */
+
+#define	FI			0x2edf		/* 12000 bits per frame (-1) */
+#define	FSMP(fi) 		(0x7fff & ((6 * ((fi) - 210)) / 7))
+#define LSTHRESH		0x628		/* lowspeed bit threshold */
+
+/* ------------------------------------------------------------------------- */
+
+/* PTD accessor macros. */
+#define PTD_GET_COUNT(p)	(((p)->count & PTD_COUNT_MSK) >> 0)
+#define PTD_COUNT(v)		(((v) << 0) & PTD_COUNT_MSK)
+#define PTD_GET_TOGGLE(p)	(((p)->count & PTD_TOGGLE_MSK) >> 10)
+#define PTD_TOGGLE(v)		(((v) << 10) & PTD_TOGGLE_MSK)
+#define PTD_GET_ACTIVE(p)	(((p)->count & PTD_ACTIVE_MSK) >> 11)
+#define PTD_ACTIVE(v)		(((v) << 11) & PTD_ACTIVE_MSK)
+#define PTD_GET_CC(p)		(((p)->count & PTD_CC_MSK) >> 12)
+#define PTD_CC(v)		(((v) << 12) & PTD_CC_MSK)
+#define PTD_GET_MPS(p)		(((p)->mps & PTD_MPS_MSK) >> 0)
+#define PTD_MPS(v)		(((v) << 0) & PTD_MPS_MSK)
+#define PTD_GET_SPD(p)		(((p)->mps & PTD_SPD_MSK) >> 10)
+#define PTD_SPD(v)		(((v) << 10) & PTD_SPD_MSK)
+#define PTD_GET_LAST(p)		(((p)->mps & PTD_LAST_MSK) >> 11)
+#define PTD_LAST(v)		(((v) << 11) & PTD_LAST_MSK)
+#define PTD_GET_EP(p)		(((p)->mps & PTD_EP_MSK) >> 12)
+#define PTD_EP(v)		(((v) << 12) & PTD_EP_MSK)
+#define PTD_GET_LEN(p)		(((p)->len & PTD_LEN_MSK) >> 0)
+#define PTD_LEN(v)		(((v) << 0) & PTD_LEN_MSK)
+#define PTD_GET_DIR(p)		(((p)->len & PTD_DIR_MSK) >> 10)
+#define PTD_DIR(v)		(((v) << 10) & PTD_DIR_MSK)
+#define PTD_GET_FA(p)		(((p)->faddr & PTD_FA_MSK) >> 0)
+#define PTD_FA(v)		(((v) << 0) & PTD_FA_MSK)
+#define PTD_GET_SF_INT(p)	(((p)->faddr & PTD_SF_INT_MSK) >> 8)
+#define PTD_SF_INT(v)		(((v) << 8) & PTD_SF_INT_MSK)
+#define PTD_GET_SF_ISO(p)	(((p)->faddr & PTD_SF_ISO_MSK) >> 8)
+#define PTD_SF_ISO(v)		(((v) << 8) & PTD_SF_ISO_MSK)
+#define PTD_GET_PR(p)		(((p)->faddr & PTD_PR_MSK) >> 13)
+#define PTD_PR(v)		(((v) << 13) & PTD_PR_MSK)
+
+#define	LOG2_PERIODIC_SIZE	5	/* arbitrary; this matches OHCI */
+#define	PERIODIC_SIZE		(1 << LOG2_PERIODIC_SIZE)
+
+struct isp1362_ep {
+	struct usb_host_endpoint *hep;
+	struct usb_device	*udev;
+
+	/* philips transfer descriptor */
+	struct ptd		ptd;
+
+	u8			maxpacket;
+	u8			epnum;
+	u8			nextpid;
+	u16			error_count;
+	u16			length;		/* of current packet */
+	s16			ptd_offset;	/* buffer offset in ISP1362 where
+						   PTD has been stored
+						   (for access thru HCDIRDATA) */
+	int			ptd_index;
+	int num_ptds;
+	void 			*data;		/* to databuf */
+	/* queue of active EPs (the ones transmitted to the chip) */
+	struct list_head	active;
+
+	/* periodic schedule */
+	u8			branch;
+	u16			interval;
+	u16			load;
+	u16			last_iso;
+
+	/* async schedule */
+	struct list_head	schedule;	/* list of all EPs that need processing */
+	struct list_head	remove_list;
+	int			num_req;
+};
+
+struct isp1362_ep_queue {
+	struct list_head	active;		/* list of PTDs currently processed by HC */
+	atomic_t		finishing;
+	unsigned long		buf_map;
+	unsigned long		skip_map;
+	int			free_ptd;
+	u16			buf_start;
+	u16			buf_size;
+	u16			blk_size;	/* PTD buffer block size for ATL and INTL */
+	u8			buf_count;
+	u8			buf_avail;
+	char			name[16];
+
+	/* for statistical tracking */
+	u8			stat_maxptds;	/* Max # of ptds seen simultaneously in fifo */
+	u8			ptd_count;	/* number of ptds submitted to this queue */
+};
+
+struct isp1362_hcd {
+	spinlock_t		lock;
+	void __iomem		*addr_reg;
+	void __iomem		*data_reg;
+
+	struct isp1362_platform_data *board;
+
+	unsigned long		stat1, stat2, stat4, stat8, stat16;
+
+	/* HC registers */
+	u32			intenb;		/* "OHCI" interrupts */
+	u16			irqenb;		/* uP interrupts */
+
+	/* Root hub registers */
+	u32			rhdesca;
+	u32			rhdescb;
+	u32			rhstatus;
+	u32			rhport[MAX_ROOT_PORTS];
+	unsigned long		next_statechange;
+
+	/* HC control reg shadow copy */
+	u32			hc_control;
+
+	/* async schedule: control, bulk */
+	struct list_head	async;
+
+	/* periodic schedule: int */
+	u16			load[PERIODIC_SIZE];
+	struct list_head	periodic;
+	u16			fmindex;
+
+	/* periodic schedule: isochronous */
+	struct list_head	isoc;
+	unsigned int		istl_flip:1;
+	unsigned int		irq_active:1;
+
+	/* Schedules for the current frame */
+	struct isp1362_ep_queue atl_queue;
+	struct isp1362_ep_queue intl_queue;
+	struct isp1362_ep_queue istl_queue[2];
+
+	/* list of PTDs retrieved from HC */
+	struct list_head	remove_list;
+	enum {
+		ISP1362_INT_SOF,
+		ISP1362_INT_ISTL0,
+		ISP1362_INT_ISTL1,
+		ISP1362_INT_EOT,
+		ISP1362_INT_OPR,
+		ISP1362_INT_SUSP,
+		ISP1362_INT_CLKRDY,
+		ISP1362_INT_INTL,
+		ISP1362_INT_ATL,
+		ISP1362_INT_OTG,
+		NUM_ISP1362_IRQS
+	} IRQ_NAMES;
+	unsigned int		irq_stat[NUM_ISP1362_IRQS];
+	int			req_serial;
+};
+
+static inline const char *ISP1362_INT_NAME(int n)
+{
+	switch (n) {
+	case ISP1362_INT_SOF:    return "SOF";
+	case ISP1362_INT_ISTL0:  return "ISTL0";
+	case ISP1362_INT_ISTL1:  return "ISTL1";
+	case ISP1362_INT_EOT:    return "EOT";
+	case ISP1362_INT_OPR:    return "OPR";
+	case ISP1362_INT_SUSP:   return "SUSP";
+	case ISP1362_INT_CLKRDY: return "CLKRDY";
+	case ISP1362_INT_INTL:   return "INTL";
+	case ISP1362_INT_ATL:    return "ATL";
+	case ISP1362_INT_OTG:    return "OTG";
+	default:                 return "unknown";
+	}
+}
+
+static inline void ALIGNSTAT(struct isp1362_hcd *isp1362_hcd, void *ptr)
+{
+	unsigned long p = (unsigned long)ptr;
+	if (!(p & 0xf))
+		isp1362_hcd->stat16++;
+	else if (!(p & 0x7))
+		isp1362_hcd->stat8++;
+	else if (!(p & 0x3))
+		isp1362_hcd->stat4++;
+	else if (!(p & 0x1))
+		isp1362_hcd->stat2++;
+	else
+		isp1362_hcd->stat1++;
+}
+
+static inline struct isp1362_hcd *hcd_to_isp1362_hcd(struct usb_hcd *hcd)
+{
+	return (struct isp1362_hcd *) (hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *isp1362_hcd_to_hcd(struct isp1362_hcd *isp1362_hcd)
+{
+	return container_of((void *)isp1362_hcd, struct usb_hcd, hcd_priv);
+}
+
+#define frame_before(f1, f2)	((s16)((u16)f1 - (u16)f2) < 0)
+
+/*
+ * ISP1362 HW Interface
+ */
+
+#define DBG(level, fmt...) \
+	do { \
+		if (dbg_level > level) \
+			pr_debug(fmt); \
+	} while (0)
+
+#ifdef VERBOSE
+#    define VDBG(fmt...)	DBG(3, fmt)
+#else
+#    define VDBG(fmt...)	do {} while (0)
+#endif
+
+#ifdef REGISTERS
+#    define RDBG(fmt...)	DBG(1, fmt)
+#else
+#    define RDBG(fmt...)	do {} while (0)
+#endif
+
+#ifdef URB_TRACE
+#define URB_DBG(fmt...)		DBG(0, fmt)
+#else
+#define URB_DBG(fmt...)		do {} while (0)
+#endif
+
+
+#if USE_PLATFORM_DELAY
+#if USE_NDELAY
+#error USE_PLATFORM_DELAY and USE_NDELAY defined simultaneously.
+#endif
+#define	isp1362_delay(h, d)	(h)->board->delay(isp1362_hcd_to_hcd(h)->self.controller, d)
+#elif USE_NDELAY
+#define	isp1362_delay(h, d)	ndelay(d)
+#else
+#define	isp1362_delay(h, d)	do {} while (0)
+#endif
+
+#define get_urb(ep) ({							\
+	BUG_ON(list_empty(&ep->hep->urb_list));				\
+	container_of(ep->hep->urb_list.next, struct urb, urb_list);	\
+})
+
+/* basic access functions for ISP1362 chip registers */
+/* NOTE: The contents of the address pointer register cannot be read back! The driver must ensure,
+ * that all register accesses are performed with interrupts disabled, since the interrupt
+ * handler has no way of restoring the previous state.
+ */
+static void isp1362_write_addr(struct isp1362_hcd *isp1362_hcd, isp1362_reg_t reg)
+{
+	REG_ACCESS_TEST(reg);
+	DUMMY_DELAY_ACCESS;
+	writew(ISP1362_REG_NO(reg), isp1362_hcd->addr_reg);
+	DUMMY_DELAY_ACCESS;
+	isp1362_delay(isp1362_hcd, 1);
+}
+
+static void isp1362_write_data16(struct isp1362_hcd *isp1362_hcd, u16 val)
+{
+	DUMMY_DELAY_ACCESS;
+	writew(val, isp1362_hcd->data_reg);
+}
+
+static u16 isp1362_read_data16(struct isp1362_hcd *isp1362_hcd)
+{
+	u16 val;
+
+	DUMMY_DELAY_ACCESS;
+	val = readw(isp1362_hcd->data_reg);
+
+	return val;
+}
+
+static void isp1362_write_data32(struct isp1362_hcd *isp1362_hcd, u32 val)
+{
+#if USE_32BIT
+	DUMMY_DELAY_ACCESS;
+	writel(val, isp1362_hcd->data_reg);
+#else
+	DUMMY_DELAY_ACCESS;
+	writew((u16)val, isp1362_hcd->data_reg);
+	DUMMY_DELAY_ACCESS;
+	writew(val >> 16, isp1362_hcd->data_reg);
+#endif
+}
+
+static u32 isp1362_read_data32(struct isp1362_hcd *isp1362_hcd)
+{
+	u32 val;
+
+#if USE_32BIT
+	DUMMY_DELAY_ACCESS;
+	val = readl(isp1362_hcd->data_reg);
+#else
+	DUMMY_DELAY_ACCESS;
+	val = (u32)readw(isp1362_hcd->data_reg);
+	DUMMY_DELAY_ACCESS;
+	val |= (u32)readw(isp1362_hcd->data_reg) << 16;
+#endif
+	return val;
+}
+
+/* use readsw/writesw to access the fifo whenever possible */
+/* assume HCDIRDATA or XFERCTR & addr_reg have been set up */
+static void isp1362_read_fifo(struct isp1362_hcd *isp1362_hcd, void *buf, u16 len)
+{
+	u8 *dp = buf;
+	u16 data;
+
+	if (!len)
+		return;
+
+	RDBG("%s: Reading %d byte from fifo to mem @ %p\n", __func__, len, buf);
+#if USE_32BIT
+	if (len >= 4) {
+		RDBG("%s: Using readsl for %d dwords\n", __func__, len >> 2);
+		readsl(isp1362_hcd->data_reg, dp, len >> 2);
+		dp += len & ~3;
+		len &= 3;
+	}
+#endif
+	if (len >= 2) {
+		RDBG("%s: Using readsw for %d words\n", __func__, len >> 1);
+		insw((unsigned long)isp1362_hcd->data_reg, dp, len >> 1);
+		dp += len & ~1;
+		len &= 1;
+	}
+
+	BUG_ON(len & ~1);
+	if (len > 0) {
+		data = isp1362_read_data16(isp1362_hcd);
+		RDBG("%s: Reading trailing byte %02x to mem @ %08x\n", __func__,
+		     (u8)data, (u32)dp);
+		*dp = (u8)data;
+	}
+}
+
+static void isp1362_write_fifo(struct isp1362_hcd *isp1362_hcd, void *buf, u16 len)
+{
+	u8 *dp = buf;
+	u16 data;
+
+	if (!len)
+		return;
+
+	if ((unsigned long)dp & 0x1) {
+		/* not aligned */
+		for (; len > 1; len -= 2) {
+			data = *dp++;
+			data |= *dp++ << 8;
+			isp1362_write_data16(isp1362_hcd, data);
+		}
+		if (len)
+			isp1362_write_data16(isp1362_hcd, *dp);
+		return;
+	}
+
+	RDBG("%s: Writing %d byte to fifo from memory @%p\n", __func__, len, buf);
+#if USE_32BIT
+	if (len >= 4) {
+		RDBG("%s: Using writesl for %d dwords\n", __func__, len >> 2);
+		writesl(isp1362_hcd->data_reg, dp, len >> 2);
+		dp += len & ~3;
+		len &= 3;
+	}
+#endif
+	if (len >= 2) {
+		RDBG("%s: Using writesw for %d words\n", __func__, len >> 1);
+		outsw((unsigned long)isp1362_hcd->data_reg, dp, len >> 1);
+		dp += len & ~1;
+		len &= 1;
+	}
+
+	BUG_ON(len & ~1);
+	if (len > 0) {
+		/* finally write any trailing byte; we don't need to care
+		 * about the high byte of the last word written
+		 */
+		data = (u16)*dp;
+		RDBG("%s: Sending trailing byte %02x from mem @ %08x\n", __func__,
+			data, (u32)dp);
+		isp1362_write_data16(isp1362_hcd, data);
+	}
+}
+
+#define isp1362_read_reg16(d, r)		({			\
+	u16 __v;							\
+	REG_WIDTH_TEST(ISP1362_REG_##r, REG_WIDTH_16);			\
+	isp1362_write_addr(d, ISP1362_REG_##r);				\
+	__v = isp1362_read_data16(d);					\
+	RDBG("%s: Read %04x from %s[%02x]\n", __func__, __v, #r,	\
+	     ISP1362_REG_NO(ISP1362_REG_##r));				\
+	__v;								\
+})
+
+#define isp1362_read_reg32(d, r)		({			\
+	u32 __v;							\
+	REG_WIDTH_TEST(ISP1362_REG_##r, REG_WIDTH_32);			\
+	isp1362_write_addr(d, ISP1362_REG_##r);				\
+	__v = isp1362_read_data32(d);					\
+	RDBG("%s: Read %08x from %s[%02x]\n", __func__, __v, #r,	\
+	     ISP1362_REG_NO(ISP1362_REG_##r));				\
+	__v;								\
+})
+
+#define isp1362_write_reg16(d, r, v)	{					\
+	REG_WIDTH_TEST(ISP1362_REG_##r, REG_WIDTH_16);				\
+	isp1362_write_addr(d, (ISP1362_REG_##r) | ISP1362_REG_WRITE_OFFSET);	\
+	isp1362_write_data16(d, (u16)(v));					\
+	RDBG("%s: Wrote %04x to %s[%02x]\n", __func__, (u16)(v), #r,	\
+	     ISP1362_REG_NO(ISP1362_REG_##r));					\
+}
+
+#define isp1362_write_reg32(d, r, v)	{					\
+	REG_WIDTH_TEST(ISP1362_REG_##r, REG_WIDTH_32);				\
+	isp1362_write_addr(d, (ISP1362_REG_##r) | ISP1362_REG_WRITE_OFFSET);	\
+	isp1362_write_data32(d, (u32)(v));					\
+	RDBG("%s: Wrote %08x to %s[%02x]\n", __func__, (u32)(v), #r,	\
+	     ISP1362_REG_NO(ISP1362_REG_##r));					\
+}
+
+#define isp1362_set_mask16(d, r, m) {			\
+	u16 __v;					\
+	__v = isp1362_read_reg16(d, r);			\
+	if ((__v | m) != __v)				\
+		isp1362_write_reg16(d, r, __v | m);	\
+}
+
+#define isp1362_clr_mask16(d, r, m) {			\
+	u16 __v;					\
+	__v = isp1362_read_reg16(d, r);			\
+	if ((__v & ~m) != __v)			\
+		isp1362_write_reg16(d, r, __v & ~m);	\
+}
+
+#define isp1362_set_mask32(d, r, m) {			\
+	u32 __v;					\
+	__v = isp1362_read_reg32(d, r);			\
+	if ((__v | m) != __v)				\
+		isp1362_write_reg32(d, r, __v | m);	\
+}
+
+#define isp1362_clr_mask32(d, r, m) {			\
+	u32 __v;					\
+	__v = isp1362_read_reg32(d, r);			\
+	if ((__v & ~m) != __v)			\
+		isp1362_write_reg32(d, r, __v & ~m);	\
+}
+
+#define isp1362_show_reg(d, r) {								\
+	if ((ISP1362_REG_##r & REG_WIDTH_MASK) == REG_WIDTH_32)			\
+		DBG(0, "%-12s[%02x]: %08x\n", #r,					\
+			ISP1362_REG_NO(ISP1362_REG_##r), isp1362_read_reg32(d, r));	\
+	else									\
+		DBG(0, "%-12s[%02x]:     %04x\n", #r,					\
+			ISP1362_REG_NO(ISP1362_REG_##r), isp1362_read_reg16(d, r));	\
+}
+
+static void isp1362_write_diraddr(struct isp1362_hcd *isp1362_hcd, u16 offset, u16 len)
+{
+	len = (len + 1) & ~1;
+
+	isp1362_clr_mask16(isp1362_hcd, HCDMACFG, HCDMACFG_CTR_ENABLE);
+	isp1362_write_reg32(isp1362_hcd, HCDIRADDR,
+			    HCDIRADDR_ADDR(offset) | HCDIRADDR_COUNT(len));
+}
+
+static void isp1362_read_buffer(struct isp1362_hcd *isp1362_hcd, void *buf, u16 offset, int len)
+{
+	isp1362_write_diraddr(isp1362_hcd, offset, len);
+
+	DBG(3, "%s: Reading %d byte from buffer @%04x to memory @ %p\n",
+	    __func__, len, offset, buf);
+
+	isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT);
+
+	isp1362_write_addr(isp1362_hcd, ISP1362_REG_HCDIRDATA);
+
+	isp1362_read_fifo(isp1362_hcd, buf, len);
+	isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT);
+}
+
+static void isp1362_write_buffer(struct isp1362_hcd *isp1362_hcd, void *buf, u16 offset, int len)
+{
+	isp1362_write_diraddr(isp1362_hcd, offset, len);
+
+	DBG(3, "%s: Writing %d byte to buffer @%04x from memory @ %p\n",
+	    __func__, len, offset, buf);
+
+	isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT);
+
+	isp1362_write_addr(isp1362_hcd, ISP1362_REG_HCDIRDATA | ISP1362_REG_WRITE_OFFSET);
+	isp1362_write_fifo(isp1362_hcd, buf, len);
+
+	isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT);
+}
+
+static void __attribute__((unused)) dump_data(char *buf, int len)
+{
+	if (dbg_level > 0) {
+		int k;
+		int lf = 0;
+
+		for (k = 0; k < len; ++k) {
+			if (!lf)
+				DBG(0, "%04x:", k);
+			printk(" %02x", ((u8 *) buf)[k]);
+			lf = 1;
+			if (!k)
+				continue;
+			if (k % 16 == 15) {
+				printk("\n");
+				lf = 0;
+				continue;
+			}
+			if (k % 8 == 7)
+				printk(" ");
+			if (k % 4 == 3)
+				printk(" ");
+		}
+		if (lf)
+			printk("\n");
+	}
+}
+
+#if defined(PTD_TRACE)
+
+static void dump_ptd(struct ptd *ptd)
+{
+	DBG(0, "EP %p: CC=%x EP=%d DIR=%x CNT=%d LEN=%d MPS=%d TGL=%x ACT=%x FA=%d SPD=%x SF=%x PR=%x LST=%x\n",
+	    container_of(ptd, struct isp1362_ep, ptd),
+	    PTD_GET_CC(ptd), PTD_GET_EP(ptd), PTD_GET_DIR(ptd),
+	    PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd),
+	    PTD_GET_TOGGLE(ptd), PTD_GET_ACTIVE(ptd), PTD_GET_FA(ptd),
+	    PTD_GET_SPD(ptd), PTD_GET_SF_INT(ptd), PTD_GET_PR(ptd), PTD_GET_LAST(ptd));
+	DBG(0, "  %04x %04x %04x %04x\n", ptd->count, ptd->mps, ptd->len, ptd->faddr);
+}
+
+static void dump_ptd_out_data(struct ptd *ptd, u8 *buf)
+{
+	if (dbg_level > 0) {
+		if (PTD_GET_DIR(ptd) != PTD_DIR_IN && PTD_GET_LEN(ptd)) {
+			DBG(0, "--out->\n");
+			dump_data(buf, PTD_GET_LEN(ptd));
+		}
+	}
+}
+
+static void dump_ptd_in_data(struct ptd *ptd, u8 *buf)
+{
+	if (dbg_level > 0) {
+		if (PTD_GET_DIR(ptd) == PTD_DIR_IN && PTD_GET_COUNT(ptd)) {
+			DBG(0, "<--in--\n");
+			dump_data(buf, PTD_GET_COUNT(ptd));
+		}
+		DBG(0, "-----\n");
+	}
+}
+
+static void dump_ptd_queue(struct isp1362_ep_queue *epq)
+{
+	struct isp1362_ep *ep;
+	int dbg = dbg_level;
+
+	dbg_level = 1;
+	list_for_each_entry(ep, &epq->active, active) {
+		dump_ptd(&ep->ptd);
+		dump_data(ep->data, ep->length);
+	}
+	dbg_level = dbg;
+}
+#else
+#define dump_ptd(ptd)			do {} while (0)
+#define dump_ptd_in_data(ptd, buf)	do {} while (0)
+#define dump_ptd_out_data(ptd, buf)	do {} while (0)
+#define dump_ptd_data(ptd, buf)		do {} while (0)
+#define dump_ptd_queue(epq)		do {} while (0)
+#endif
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
new file mode 100644
index 000000000..19111e83a
--- /dev/null
+++ b/drivers/usb/host/max3421-hcd.c
@@ -0,0 +1,1971 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MAX3421 Host Controller driver for USB.
+ *
+ * Author: David Mosberger-Tang <davidm@egauge.net>
+ *
+ * (C) Copyright 2014 David Mosberger-Tang <davidm@egauge.net>
+ *
+ * MAX3421 is a chip implementing a USB 2.0 Full-/Low-Speed host
+ * controller on a SPI bus.
+ *
+ * Based on:
+ *	o MAX3421E datasheet
+ *		https://datasheets.maximintegrated.com/en/ds/MAX3421E.pdf
+ *	o MAX3421E Programming Guide
+ *		https://www.hdl.co.jp/ftpdata/utl-001/AN3785.pdf
+ *	o gadget/dummy_hcd.c
+ *		For USB HCD implementation.
+ *	o Arduino MAX3421 driver
+ *	     https://github.com/felis/USB_Host_Shield_2.0/blob/master/Usb.cpp
+ *
+ * This file is licenced under the GPL v2.
+ *
+ * Important note on worst-case (full-speed) packet size constraints
+ * (See USB 2.0 Section 5.6.3 and following):
+ *
+ *	- control:	  64 bytes
+ *	- isochronous:	1023 bytes
+ *	- interrupt:	  64 bytes
+ *	- bulk:		  64 bytes
+ *
+ * Since the MAX3421 FIFO size is 64 bytes, we do not have to work about
+ * multi-FIFO writes/reads for a single USB packet *except* for isochronous
+ * transfers.  We don't support isochronous transfers at this time, so we
+ * just assume that a USB packet always fits into a single FIFO buffer.
+ *
+ * NOTE: The June 2006 version of "MAX3421E Programming Guide"
+ * (AN3785) has conflicting info for the RCVDAVIRQ bit:
+ *
+ *	The description of RCVDAVIRQ says "The CPU *must* clear
+ *	this IRQ bit (by writing a 1 to it) before reading the
+ *	RCVFIFO data.
+ *
+ * However, the earlier section on "Programming BULK-IN
+ * Transfers" says * that:
+ *
+ *	After the CPU retrieves the data, it clears the
+ *	RCVDAVIRQ bit.
+ *
+ * The December 2006 version has been corrected and it consistently
+ * states the second behavior is the correct one.
+ *
+ * Synchronous SPI transactions sleep so we can't perform any such
+ * transactions while holding a spin-lock (and/or while interrupts are
+ * masked).  To achieve this, all SPI transactions are issued from a
+ * single thread (max3421_spi_thread).
+ */
+
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/of.h>
+
+#include <linux/platform_data/max3421-hcd.h>
+
+#define DRIVER_DESC	"MAX3421 USB Host-Controller Driver"
+#define DRIVER_VERSION	"1.0"
+
+/* 11-bit counter that wraps around (USB 2.0 Section 8.3.3): */
+#define USB_MAX_FRAME_NUMBER	0x7ff
+#define USB_MAX_RETRIES		3 /* # of retries before error is reported */
+
+/*
+ * Max. # of times we're willing to retransmit a request immediately in
+ * resposne to a NAK.  Afterwards, we fall back on trying once a frame.
+ */
+#define NAK_MAX_FAST_RETRANSMITS	2
+
+#define POWER_BUDGET	500	/* in mA; use 8 for low-power port testing */
+
+/* Port-change mask: */
+#define PORT_C_MASK	((USB_PORT_STAT_C_CONNECTION |	\
+			  USB_PORT_STAT_C_ENABLE |	\
+			  USB_PORT_STAT_C_SUSPEND |	\
+			  USB_PORT_STAT_C_OVERCURRENT | \
+			  USB_PORT_STAT_C_RESET) << 16)
+
+#define MAX3421_GPOUT_COUNT	8
+
+enum max3421_rh_state {
+	MAX3421_RH_RESET,
+	MAX3421_RH_SUSPENDED,
+	MAX3421_RH_RUNNING
+};
+
+enum pkt_state {
+	PKT_STATE_SETUP,	/* waiting to send setup packet to ctrl pipe */
+	PKT_STATE_TRANSFER,	/* waiting to xfer transfer_buffer */
+	PKT_STATE_TERMINATE	/* waiting to terminate control transfer */
+};
+
+enum scheduling_pass {
+	SCHED_PASS_PERIODIC,
+	SCHED_PASS_NON_PERIODIC,
+	SCHED_PASS_DONE
+};
+
+/* Bit numbers for max3421_hcd->todo: */
+enum {
+	ENABLE_IRQ = 0,
+	RESET_HCD,
+	RESET_PORT,
+	CHECK_UNLINK,
+	IOPIN_UPDATE
+};
+
+struct max3421_dma_buf {
+	u8 data[2];
+};
+
+struct max3421_hcd {
+	spinlock_t lock;
+
+	struct task_struct *spi_thread;
+
+	enum max3421_rh_state rh_state;
+	/* lower 16 bits contain port status, upper 16 bits the change mask: */
+	u32 port_status;
+
+	unsigned active:1;
+
+	struct list_head ep_list;	/* list of EP's with work */
+
+	/*
+	 * The following are owned by spi_thread (may be accessed by
+	 * SPI-thread without acquiring the HCD lock:
+	 */
+	u8 rev;				/* chip revision */
+	u16 frame_number;
+	/*
+	 * kmalloc'd buffers guaranteed to be in separate (DMA)
+	 * cache-lines:
+	 */
+	struct max3421_dma_buf *tx;
+	struct max3421_dma_buf *rx;
+	/*
+	 * URB we're currently processing.  Must not be reset to NULL
+	 * unless MAX3421E chip is idle:
+	 */
+	struct urb *curr_urb;
+	enum scheduling_pass sched_pass;
+	int urb_done;			/* > 0 -> no errors, < 0: errno */
+	size_t curr_len;
+	u8 hien;
+	u8 mode;
+	u8 iopins[2];
+	unsigned long todo;
+#ifdef DEBUG
+	unsigned long err_stat[16];
+#endif
+};
+
+struct max3421_ep {
+	struct usb_host_endpoint *ep;
+	struct list_head ep_list;
+	u32 naks;
+	u16 last_active;		/* frame # this ep was last active */
+	enum pkt_state pkt_state;
+	u8 retries;
+	u8 retransmit;			/* packet needs retransmission */
+};
+
+#define MAX3421_FIFO_SIZE	64
+
+#define MAX3421_SPI_DIR_RD	0	/* read register from MAX3421 */
+#define MAX3421_SPI_DIR_WR	1	/* write register to MAX3421 */
+
+/* SPI commands: */
+#define MAX3421_SPI_DIR_SHIFT	1
+#define MAX3421_SPI_REG_SHIFT	3
+
+#define MAX3421_REG_RCVFIFO	1
+#define MAX3421_REG_SNDFIFO	2
+#define MAX3421_REG_SUDFIFO	4
+#define MAX3421_REG_RCVBC	6
+#define MAX3421_REG_SNDBC	7
+#define MAX3421_REG_USBIRQ	13
+#define MAX3421_REG_USBIEN	14
+#define MAX3421_REG_USBCTL	15
+#define MAX3421_REG_CPUCTL	16
+#define MAX3421_REG_PINCTL	17
+#define MAX3421_REG_REVISION	18
+#define MAX3421_REG_IOPINS1	20
+#define MAX3421_REG_IOPINS2	21
+#define MAX3421_REG_GPINIRQ	22
+#define MAX3421_REG_GPINIEN	23
+#define MAX3421_REG_GPINPOL	24
+#define MAX3421_REG_HIRQ	25
+#define MAX3421_REG_HIEN	26
+#define MAX3421_REG_MODE	27
+#define MAX3421_REG_PERADDR	28
+#define MAX3421_REG_HCTL	29
+#define MAX3421_REG_HXFR	30
+#define MAX3421_REG_HRSL	31
+
+enum {
+	MAX3421_USBIRQ_OSCOKIRQ_BIT = 0,
+	MAX3421_USBIRQ_NOVBUSIRQ_BIT = 5,
+	MAX3421_USBIRQ_VBUSIRQ_BIT
+};
+
+enum {
+	MAX3421_CPUCTL_IE_BIT = 0,
+	MAX3421_CPUCTL_PULSEWID0_BIT = 6,
+	MAX3421_CPUCTL_PULSEWID1_BIT
+};
+
+enum {
+	MAX3421_USBCTL_PWRDOWN_BIT = 4,
+	MAX3421_USBCTL_CHIPRES_BIT
+};
+
+enum {
+	MAX3421_PINCTL_GPXA_BIT	= 0,
+	MAX3421_PINCTL_GPXB_BIT,
+	MAX3421_PINCTL_POSINT_BIT,
+	MAX3421_PINCTL_INTLEVEL_BIT,
+	MAX3421_PINCTL_FDUPSPI_BIT,
+	MAX3421_PINCTL_EP0INAK_BIT,
+	MAX3421_PINCTL_EP2INAK_BIT,
+	MAX3421_PINCTL_EP3INAK_BIT,
+};
+
+enum {
+	MAX3421_HI_BUSEVENT_BIT = 0,	/* bus-reset/-resume */
+	MAX3421_HI_RWU_BIT,		/* remote wakeup */
+	MAX3421_HI_RCVDAV_BIT,		/* receive FIFO data available */
+	MAX3421_HI_SNDBAV_BIT,		/* send buffer available */
+	MAX3421_HI_SUSDN_BIT,		/* suspend operation done */
+	MAX3421_HI_CONDET_BIT,		/* peripheral connect/disconnect */
+	MAX3421_HI_FRAME_BIT,		/* frame generator */
+	MAX3421_HI_HXFRDN_BIT,		/* host transfer done */
+};
+
+enum {
+	MAX3421_HCTL_BUSRST_BIT = 0,
+	MAX3421_HCTL_FRMRST_BIT,
+	MAX3421_HCTL_SAMPLEBUS_BIT,
+	MAX3421_HCTL_SIGRSM_BIT,
+	MAX3421_HCTL_RCVTOG0_BIT,
+	MAX3421_HCTL_RCVTOG1_BIT,
+	MAX3421_HCTL_SNDTOG0_BIT,
+	MAX3421_HCTL_SNDTOG1_BIT
+};
+
+enum {
+	MAX3421_MODE_HOST_BIT = 0,
+	MAX3421_MODE_LOWSPEED_BIT,
+	MAX3421_MODE_HUBPRE_BIT,
+	MAX3421_MODE_SOFKAENAB_BIT,
+	MAX3421_MODE_SEPIRQ_BIT,
+	MAX3421_MODE_DELAYISO_BIT,
+	MAX3421_MODE_DMPULLDN_BIT,
+	MAX3421_MODE_DPPULLDN_BIT
+};
+
+enum {
+	MAX3421_HRSL_OK = 0,
+	MAX3421_HRSL_BUSY,
+	MAX3421_HRSL_BADREQ,
+	MAX3421_HRSL_UNDEF,
+	MAX3421_HRSL_NAK,
+	MAX3421_HRSL_STALL,
+	MAX3421_HRSL_TOGERR,
+	MAX3421_HRSL_WRONGPID,
+	MAX3421_HRSL_BADBC,
+	MAX3421_HRSL_PIDERR,
+	MAX3421_HRSL_PKTERR,
+	MAX3421_HRSL_CRCERR,
+	MAX3421_HRSL_KERR,
+	MAX3421_HRSL_JERR,
+	MAX3421_HRSL_TIMEOUT,
+	MAX3421_HRSL_BABBLE,
+	MAX3421_HRSL_RESULT_MASK = 0xf,
+	MAX3421_HRSL_RCVTOGRD_BIT = 4,
+	MAX3421_HRSL_SNDTOGRD_BIT,
+	MAX3421_HRSL_KSTATUS_BIT,
+	MAX3421_HRSL_JSTATUS_BIT
+};
+
+/* Return same error-codes as ohci.h:cc_to_error: */
+static const int hrsl_to_error[] = {
+	[MAX3421_HRSL_OK] =		0,
+	[MAX3421_HRSL_BUSY] =		-EINVAL,
+	[MAX3421_HRSL_BADREQ] =		-EINVAL,
+	[MAX3421_HRSL_UNDEF] =		-EINVAL,
+	[MAX3421_HRSL_NAK] =		-EAGAIN,
+	[MAX3421_HRSL_STALL] =		-EPIPE,
+	[MAX3421_HRSL_TOGERR] =		-EILSEQ,
+	[MAX3421_HRSL_WRONGPID] =	-EPROTO,
+	[MAX3421_HRSL_BADBC] =		-EREMOTEIO,
+	[MAX3421_HRSL_PIDERR] =		-EPROTO,
+	[MAX3421_HRSL_PKTERR] =		-EPROTO,
+	[MAX3421_HRSL_CRCERR] =		-EILSEQ,
+	[MAX3421_HRSL_KERR] =		-EIO,
+	[MAX3421_HRSL_JERR] =		-EIO,
+	[MAX3421_HRSL_TIMEOUT] =	-ETIME,
+	[MAX3421_HRSL_BABBLE] =		-EOVERFLOW
+};
+
+/*
+ * See https://www.beyondlogic.org/usbnutshell/usb4.shtml#Control for a
+ * reasonable overview of how control transfers use the IN/OUT
+ * tokens.
+ */
+#define MAX3421_HXFR_BULK_IN(ep)	(0x00 | (ep))	/* bulk or interrupt */
+#define MAX3421_HXFR_SETUP		 0x10
+#define MAX3421_HXFR_BULK_OUT(ep)	(0x20 | (ep))	/* bulk or interrupt */
+#define MAX3421_HXFR_ISO_IN(ep)		(0x40 | (ep))
+#define MAX3421_HXFR_ISO_OUT(ep)	(0x60 | (ep))
+#define MAX3421_HXFR_HS_IN		 0x80		/* handshake in */
+#define MAX3421_HXFR_HS_OUT		 0xa0		/* handshake out */
+
+#define field(val, bit)	((val) << (bit))
+
+static inline s16
+frame_diff(u16 left, u16 right)
+{
+	return ((unsigned) (left - right)) % (USB_MAX_FRAME_NUMBER + 1);
+}
+
+static inline struct max3421_hcd *
+hcd_to_max3421(struct usb_hcd *hcd)
+{
+	return (struct max3421_hcd *) hcd->hcd_priv;
+}
+
+static inline struct usb_hcd *
+max3421_to_hcd(struct max3421_hcd *max3421_hcd)
+{
+	return container_of((void *) max3421_hcd, struct usb_hcd, hcd_priv);
+}
+
+static u8
+spi_rd8(struct usb_hcd *hcd, unsigned int reg)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	struct spi_device *spi = to_spi_device(hcd->self.controller);
+	struct spi_transfer transfer;
+	struct spi_message msg;
+
+	memset(&transfer, 0, sizeof(transfer));
+
+	spi_message_init(&msg);
+
+	max3421_hcd->tx->data[0] =
+		(field(reg, MAX3421_SPI_REG_SHIFT) |
+		 field(MAX3421_SPI_DIR_RD, MAX3421_SPI_DIR_SHIFT));
+
+	transfer.tx_buf = max3421_hcd->tx->data;
+	transfer.rx_buf = max3421_hcd->rx->data;
+	transfer.len = 2;
+
+	spi_message_add_tail(&transfer, &msg);
+	spi_sync(spi, &msg);
+
+	return max3421_hcd->rx->data[1];
+}
+
+static void
+spi_wr8(struct usb_hcd *hcd, unsigned int reg, u8 val)
+{
+	struct spi_device *spi = to_spi_device(hcd->self.controller);
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	struct spi_transfer transfer;
+	struct spi_message msg;
+
+	memset(&transfer, 0, sizeof(transfer));
+
+	spi_message_init(&msg);
+
+	max3421_hcd->tx->data[0] =
+		(field(reg, MAX3421_SPI_REG_SHIFT) |
+		 field(MAX3421_SPI_DIR_WR, MAX3421_SPI_DIR_SHIFT));
+	max3421_hcd->tx->data[1] = val;
+
+	transfer.tx_buf = max3421_hcd->tx->data;
+	transfer.len = 2;
+
+	spi_message_add_tail(&transfer, &msg);
+	spi_sync(spi, &msg);
+}
+
+static void
+spi_rd_buf(struct usb_hcd *hcd, unsigned int reg, void *buf, size_t len)
+{
+	struct spi_device *spi = to_spi_device(hcd->self.controller);
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	struct spi_transfer transfer[2];
+	struct spi_message msg;
+
+	memset(transfer, 0, sizeof(transfer));
+
+	spi_message_init(&msg);
+
+	max3421_hcd->tx->data[0] =
+		(field(reg, MAX3421_SPI_REG_SHIFT) |
+		 field(MAX3421_SPI_DIR_RD, MAX3421_SPI_DIR_SHIFT));
+	transfer[0].tx_buf = max3421_hcd->tx->data;
+	transfer[0].len = 1;
+
+	transfer[1].rx_buf = buf;
+	transfer[1].len = len;
+
+	spi_message_add_tail(&transfer[0], &msg);
+	spi_message_add_tail(&transfer[1], &msg);
+	spi_sync(spi, &msg);
+}
+
+static void
+spi_wr_buf(struct usb_hcd *hcd, unsigned int reg, void *buf, size_t len)
+{
+	struct spi_device *spi = to_spi_device(hcd->self.controller);
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	struct spi_transfer transfer[2];
+	struct spi_message msg;
+
+	memset(transfer, 0, sizeof(transfer));
+
+	spi_message_init(&msg);
+
+	max3421_hcd->tx->data[0] =
+		(field(reg, MAX3421_SPI_REG_SHIFT) |
+		 field(MAX3421_SPI_DIR_WR, MAX3421_SPI_DIR_SHIFT));
+
+	transfer[0].tx_buf = max3421_hcd->tx->data;
+	transfer[0].len = 1;
+
+	transfer[1].tx_buf = buf;
+	transfer[1].len = len;
+
+	spi_message_add_tail(&transfer[0], &msg);
+	spi_message_add_tail(&transfer[1], &msg);
+	spi_sync(spi, &msg);
+}
+
+/*
+ * Figure out the correct setting for the LOWSPEED and HUBPRE mode
+ * bits.  The HUBPRE bit needs to be set when MAX3421E operates at
+ * full speed, but it's talking to a low-speed device (i.e., through a
+ * hub).  Setting that bit ensures that every low-speed packet is
+ * preceded by a full-speed PRE PID.  Possible configurations:
+ *
+ * Hub speed:	Device speed:	=>	LOWSPEED bit:	HUBPRE bit:
+ *	FULL	FULL		=>	0		0
+ *	FULL	LOW		=>	1		1
+ *	LOW	LOW		=>	1		0
+ *	LOW	FULL		=>	1		0
+ */
+static void
+max3421_set_speed(struct usb_hcd *hcd, struct usb_device *dev)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	u8 mode_lowspeed, mode_hubpre, mode = max3421_hcd->mode;
+
+	mode_lowspeed = BIT(MAX3421_MODE_LOWSPEED_BIT);
+	mode_hubpre   = BIT(MAX3421_MODE_HUBPRE_BIT);
+	if (max3421_hcd->port_status & USB_PORT_STAT_LOW_SPEED) {
+		mode |=  mode_lowspeed;
+		mode &= ~mode_hubpre;
+	} else if (dev->speed == USB_SPEED_LOW) {
+		mode |= mode_lowspeed | mode_hubpre;
+	} else {
+		mode &= ~(mode_lowspeed | mode_hubpre);
+	}
+	if (mode != max3421_hcd->mode) {
+		max3421_hcd->mode = mode;
+		spi_wr8(hcd, MAX3421_REG_MODE, max3421_hcd->mode);
+	}
+
+}
+
+/*
+ * Caller must NOT hold HCD spinlock.
+ */
+static void
+max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum)
+{
+	int rcvtog, sndtog;
+	u8 hctl;
+
+	/* setup new endpoint's toggle bits: */
+	rcvtog = usb_gettoggle(dev, epnum, 0);
+	sndtog = usb_gettoggle(dev, epnum, 1);
+	hctl = (BIT(rcvtog + MAX3421_HCTL_RCVTOG0_BIT) |
+		BIT(sndtog + MAX3421_HCTL_SNDTOG0_BIT));
+
+	spi_wr8(hcd, MAX3421_REG_HCTL, hctl);
+
+	/*
+	 * Note: devnum for one and the same device can change during
+	 * address-assignment so it's best to just always load the
+	 * address whenever the end-point changed/was forced.
+	 */
+	spi_wr8(hcd, MAX3421_REG_PERADDR, dev->devnum);
+}
+
+static int
+max3421_ctrl_setup(struct usb_hcd *hcd, struct urb *urb)
+{
+	spi_wr_buf(hcd, MAX3421_REG_SUDFIFO, urb->setup_packet, 8);
+	return MAX3421_HXFR_SETUP;
+}
+
+static int
+max3421_transfer_in(struct usb_hcd *hcd, struct urb *urb)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	int epnum = usb_pipeendpoint(urb->pipe);
+
+	max3421_hcd->curr_len = 0;
+	max3421_hcd->hien |= BIT(MAX3421_HI_RCVDAV_BIT);
+	return MAX3421_HXFR_BULK_IN(epnum);
+}
+
+static int
+max3421_transfer_out(struct usb_hcd *hcd, struct urb *urb, int fast_retransmit)
+{
+	struct spi_device *spi = to_spi_device(hcd->self.controller);
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	int epnum = usb_pipeendpoint(urb->pipe);
+	u32 max_packet;
+	void *src;
+
+	src = urb->transfer_buffer + urb->actual_length;
+
+	if (fast_retransmit) {
+		if (max3421_hcd->rev == 0x12) {
+			/* work around rev 0x12 bug: */
+			spi_wr8(hcd, MAX3421_REG_SNDBC, 0);
+			spi_wr8(hcd, MAX3421_REG_SNDFIFO, ((u8 *) src)[0]);
+			spi_wr8(hcd, MAX3421_REG_SNDBC, max3421_hcd->curr_len);
+		}
+		return MAX3421_HXFR_BULK_OUT(epnum);
+	}
+
+	max_packet = usb_maxpacket(urb->dev, urb->pipe);
+
+	if (max_packet > MAX3421_FIFO_SIZE) {
+		/*
+		 * We do not support isochronous transfers at this
+		 * time.
+		 */
+		dev_err(&spi->dev,
+			"%s: packet-size of %u too big (limit is %u bytes)",
+			__func__, max_packet, MAX3421_FIFO_SIZE);
+		max3421_hcd->urb_done = -EMSGSIZE;
+		return -EMSGSIZE;
+	}
+	max3421_hcd->curr_len = min((urb->transfer_buffer_length -
+				     urb->actual_length), max_packet);
+
+	spi_wr_buf(hcd, MAX3421_REG_SNDFIFO, src, max3421_hcd->curr_len);
+	spi_wr8(hcd, MAX3421_REG_SNDBC, max3421_hcd->curr_len);
+	return MAX3421_HXFR_BULK_OUT(epnum);
+}
+
+/*
+ * Issue the next host-transfer command.
+ * Caller must NOT hold HCD spinlock.
+ */
+static void
+max3421_next_transfer(struct usb_hcd *hcd, int fast_retransmit)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	struct urb *urb = max3421_hcd->curr_urb;
+	struct max3421_ep *max3421_ep;
+	int cmd = -EINVAL;
+
+	if (!urb)
+		return;	/* nothing to do */
+
+	max3421_ep = urb->ep->hcpriv;
+
+	switch (max3421_ep->pkt_state) {
+	case PKT_STATE_SETUP:
+		cmd = max3421_ctrl_setup(hcd, urb);
+		break;
+
+	case PKT_STATE_TRANSFER:
+		if (usb_urb_dir_in(urb))
+			cmd = max3421_transfer_in(hcd, urb);
+		else
+			cmd = max3421_transfer_out(hcd, urb, fast_retransmit);
+		break;
+
+	case PKT_STATE_TERMINATE:
+		/*
+		 * IN transfers are terminated with HS_OUT token,
+		 * OUT transfers with HS_IN:
+		 */
+		if (usb_urb_dir_in(urb))
+			cmd = MAX3421_HXFR_HS_OUT;
+		else
+			cmd = MAX3421_HXFR_HS_IN;
+		break;
+	}
+
+	if (cmd < 0)
+		return;
+
+	/* issue the command and wait for host-xfer-done interrupt: */
+
+	spi_wr8(hcd, MAX3421_REG_HXFR, cmd);
+	max3421_hcd->hien |= BIT(MAX3421_HI_HXFRDN_BIT);
+}
+
+/*
+ * Find the next URB to process and start its execution.
+ *
+ * At this time, we do not anticipate ever connecting a USB hub to the
+ * MAX3421 chip, so at most USB device can be connected and we can use
+ * a simplistic scheduler: at the start of a frame, schedule all
+ * periodic transfers.  Once that is done, use the remainder of the
+ * frame to process non-periodic (bulk & control) transfers.
+ *
+ * Preconditions:
+ * o Caller must NOT hold HCD spinlock.
+ * o max3421_hcd->curr_urb MUST BE NULL.
+ * o MAX3421E chip must be idle.
+ */
+static int
+max3421_select_and_start_urb(struct usb_hcd *hcd)
+{
+	struct spi_device *spi = to_spi_device(hcd->self.controller);
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	struct urb *urb, *curr_urb = NULL;
+	struct max3421_ep *max3421_ep;
+	int epnum;
+	struct usb_host_endpoint *ep;
+	struct list_head *pos;
+	unsigned long flags;
+
+	spin_lock_irqsave(&max3421_hcd->lock, flags);
+
+	for (;
+	     max3421_hcd->sched_pass < SCHED_PASS_DONE;
+	     ++max3421_hcd->sched_pass)
+		list_for_each(pos, &max3421_hcd->ep_list) {
+			urb = NULL;
+			max3421_ep = container_of(pos, struct max3421_ep,
+						  ep_list);
+			ep = max3421_ep->ep;
+
+			switch (usb_endpoint_type(&ep->desc)) {
+			case USB_ENDPOINT_XFER_ISOC:
+			case USB_ENDPOINT_XFER_INT:
+				if (max3421_hcd->sched_pass !=
+				    SCHED_PASS_PERIODIC)
+					continue;
+				break;
+
+			case USB_ENDPOINT_XFER_CONTROL:
+			case USB_ENDPOINT_XFER_BULK:
+				if (max3421_hcd->sched_pass !=
+				    SCHED_PASS_NON_PERIODIC)
+					continue;
+				break;
+			}
+
+			if (list_empty(&ep->urb_list))
+				continue;	/* nothing to do */
+			urb = list_first_entry(&ep->urb_list, struct urb,
+					       urb_list);
+			if (urb->unlinked) {
+				dev_dbg(&spi->dev, "%s: URB %p unlinked=%d",
+					__func__, urb, urb->unlinked);
+				max3421_hcd->curr_urb = urb;
+				max3421_hcd->urb_done = 1;
+				spin_unlock_irqrestore(&max3421_hcd->lock,
+						       flags);
+				return 1;
+			}
+
+			switch (usb_endpoint_type(&ep->desc)) {
+			case USB_ENDPOINT_XFER_CONTROL:
+				/*
+				 * Allow one control transaction per
+				 * frame per endpoint:
+				 */
+				if (frame_diff(max3421_ep->last_active,
+					       max3421_hcd->frame_number) == 0)
+					continue;
+				break;
+
+			case USB_ENDPOINT_XFER_BULK:
+				if (max3421_ep->retransmit
+				    && (frame_diff(max3421_ep->last_active,
+						   max3421_hcd->frame_number)
+					== 0))
+					/*
+					 * We already tried this EP
+					 * during this frame and got a
+					 * NAK or error; wait for next frame
+					 */
+					continue;
+				break;
+
+			case USB_ENDPOINT_XFER_ISOC:
+			case USB_ENDPOINT_XFER_INT:
+				if (frame_diff(max3421_hcd->frame_number,
+					       max3421_ep->last_active)
+				    < urb->interval)
+					/*
+					 * We already processed this
+					 * end-point in the current
+					 * frame
+					 */
+					continue;
+				break;
+			}
+
+			/* move current ep to tail: */
+			list_move_tail(pos, &max3421_hcd->ep_list);
+			curr_urb = urb;
+			goto done;
+		}
+done:
+	if (!curr_urb) {
+		spin_unlock_irqrestore(&max3421_hcd->lock, flags);
+		return 0;
+	}
+
+	urb = max3421_hcd->curr_urb = curr_urb;
+	epnum = usb_endpoint_num(&urb->ep->desc);
+	if (max3421_ep->retransmit)
+		/* restart (part of) a USB transaction: */
+		max3421_ep->retransmit = 0;
+	else {
+		/* start USB transaction: */
+		if (usb_endpoint_xfer_control(&ep->desc)) {
+			/*
+			 * See USB 2.0 spec section 8.6.1
+			 * Initialization via SETUP Token:
+			 */
+			usb_settoggle(urb->dev, epnum, 0, 1);
+			usb_settoggle(urb->dev, epnum, 1, 1);
+			max3421_ep->pkt_state = PKT_STATE_SETUP;
+		} else
+			max3421_ep->pkt_state = PKT_STATE_TRANSFER;
+	}
+
+	spin_unlock_irqrestore(&max3421_hcd->lock, flags);
+
+	max3421_ep->last_active = max3421_hcd->frame_number;
+	max3421_set_address(hcd, urb->dev, epnum);
+	max3421_set_speed(hcd, urb->dev);
+	max3421_next_transfer(hcd, 0);
+	return 1;
+}
+
+/*
+ * Check all endpoints for URBs that got unlinked.
+ *
+ * Caller must NOT hold HCD spinlock.
+ */
+static int
+max3421_check_unlink(struct usb_hcd *hcd)
+{
+	struct spi_device *spi = to_spi_device(hcd->self.controller);
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	struct max3421_ep *max3421_ep;
+	struct usb_host_endpoint *ep;
+	struct urb *urb, *next;
+	unsigned long flags;
+	int retval = 0;
+
+	spin_lock_irqsave(&max3421_hcd->lock, flags);
+	list_for_each_entry(max3421_ep, &max3421_hcd->ep_list, ep_list) {
+		ep = max3421_ep->ep;
+		list_for_each_entry_safe(urb, next, &ep->urb_list, urb_list) {
+			if (urb->unlinked) {
+				retval = 1;
+				dev_dbg(&spi->dev, "%s: URB %p unlinked=%d",
+					__func__, urb, urb->unlinked);
+				usb_hcd_unlink_urb_from_ep(hcd, urb);
+				spin_unlock_irqrestore(&max3421_hcd->lock,
+						       flags);
+				usb_hcd_giveback_urb(hcd, urb, 0);
+				spin_lock_irqsave(&max3421_hcd->lock, flags);
+			}
+		}
+	}
+	spin_unlock_irqrestore(&max3421_hcd->lock, flags);
+	return retval;
+}
+
+/*
+ * Caller must NOT hold HCD spinlock.
+ */
+static void
+max3421_slow_retransmit(struct usb_hcd *hcd)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	struct urb *urb = max3421_hcd->curr_urb;
+	struct max3421_ep *max3421_ep;
+
+	max3421_ep = urb->ep->hcpriv;
+	max3421_ep->retransmit = 1;
+	max3421_hcd->curr_urb = NULL;
+}
+
+/*
+ * Caller must NOT hold HCD spinlock.
+ */
+static void
+max3421_recv_data_available(struct usb_hcd *hcd)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	struct urb *urb = max3421_hcd->curr_urb;
+	size_t remaining, transfer_size;
+	u8 rcvbc;
+
+	rcvbc = spi_rd8(hcd, MAX3421_REG_RCVBC);
+
+	if (rcvbc > MAX3421_FIFO_SIZE)
+		rcvbc = MAX3421_FIFO_SIZE;
+	if (urb->actual_length >= urb->transfer_buffer_length)
+		remaining = 0;
+	else
+		remaining = urb->transfer_buffer_length - urb->actual_length;
+	transfer_size = rcvbc;
+	if (transfer_size > remaining)
+		transfer_size = remaining;
+	if (transfer_size > 0) {
+		void *dst = urb->transfer_buffer + urb->actual_length;
+
+		spi_rd_buf(hcd, MAX3421_REG_RCVFIFO, dst, transfer_size);
+		urb->actual_length += transfer_size;
+		max3421_hcd->curr_len = transfer_size;
+	}
+
+	/* ack the RCVDAV irq now that the FIFO has been read: */
+	spi_wr8(hcd, MAX3421_REG_HIRQ, BIT(MAX3421_HI_RCVDAV_BIT));
+}
+
+static void
+max3421_handle_error(struct usb_hcd *hcd, u8 hrsl)
+{
+	struct spi_device *spi = to_spi_device(hcd->self.controller);
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	u8 result_code = hrsl & MAX3421_HRSL_RESULT_MASK;
+	struct urb *urb = max3421_hcd->curr_urb;
+	struct max3421_ep *max3421_ep = urb->ep->hcpriv;
+	int switch_sndfifo;
+
+	/*
+	 * If an OUT command results in any response other than OK
+	 * (i.e., error or NAK), we have to perform a dummy-write to
+	 * SNDBC so the FIFO gets switched back to us.  Otherwise, we
+	 * get out of sync with the SNDFIFO double buffer.
+	 */
+	switch_sndfifo = (max3421_ep->pkt_state == PKT_STATE_TRANSFER &&
+			  usb_urb_dir_out(urb));
+
+	switch (result_code) {
+	case MAX3421_HRSL_OK:
+		return;			/* this shouldn't happen */
+
+	case MAX3421_HRSL_WRONGPID:	/* received wrong PID */
+	case MAX3421_HRSL_BUSY:		/* SIE busy */
+	case MAX3421_HRSL_BADREQ:	/* bad val in HXFR */
+	case MAX3421_HRSL_UNDEF:	/* reserved */
+	case MAX3421_HRSL_KERR:		/* K-state instead of response */
+	case MAX3421_HRSL_JERR:		/* J-state instead of response */
+		/*
+		 * packet experienced an error that we cannot recover
+		 * from; report error
+		 */
+		max3421_hcd->urb_done = hrsl_to_error[result_code];
+		dev_dbg(&spi->dev, "%s: unexpected error HRSL=0x%02x",
+			__func__, hrsl);
+		break;
+
+	case MAX3421_HRSL_TOGERR:
+		if (usb_urb_dir_in(urb))
+			; /* don't do anything (device will switch toggle) */
+		else {
+			/* flip the send toggle bit: */
+			int sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1;
+
+			sndtog ^= 1;
+			spi_wr8(hcd, MAX3421_REG_HCTL,
+				BIT(sndtog + MAX3421_HCTL_SNDTOG0_BIT));
+		}
+		fallthrough;
+	case MAX3421_HRSL_BADBC:	/* bad byte count */
+	case MAX3421_HRSL_PIDERR:	/* received PID is corrupted */
+	case MAX3421_HRSL_PKTERR:	/* packet error (stuff, EOP) */
+	case MAX3421_HRSL_CRCERR:	/* CRC error */
+	case MAX3421_HRSL_BABBLE:	/* device talked too long */
+	case MAX3421_HRSL_TIMEOUT:
+		if (max3421_ep->retries++ < USB_MAX_RETRIES)
+			/* retry the packet again in the next frame */
+			max3421_slow_retransmit(hcd);
+		else {
+			/* Based on ohci.h cc_to_err[]: */
+			max3421_hcd->urb_done = hrsl_to_error[result_code];
+			dev_dbg(&spi->dev, "%s: unexpected error HRSL=0x%02x",
+				__func__, hrsl);
+		}
+		break;
+
+	case MAX3421_HRSL_STALL:
+		dev_dbg(&spi->dev, "%s: unexpected error HRSL=0x%02x",
+			__func__, hrsl);
+		max3421_hcd->urb_done = hrsl_to_error[result_code];
+		break;
+
+	case MAX3421_HRSL_NAK:
+		/*
+		 * Device wasn't ready for data or has no data
+		 * available: retry the packet again.
+		 */
+		if (max3421_ep->naks++ < NAK_MAX_FAST_RETRANSMITS) {
+			max3421_next_transfer(hcd, 1);
+			switch_sndfifo = 0;
+		} else
+			max3421_slow_retransmit(hcd);
+		break;
+	}
+	if (switch_sndfifo)
+		spi_wr8(hcd, MAX3421_REG_SNDBC, 0);
+}
+
+/*
+ * Caller must NOT hold HCD spinlock.
+ */
+static int
+max3421_transfer_in_done(struct usb_hcd *hcd, struct urb *urb)
+{
+	struct spi_device *spi = to_spi_device(hcd->self.controller);
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	u32 max_packet;
+
+	if (urb->actual_length >= urb->transfer_buffer_length)
+		return 1;	/* read is complete, so we're done */
+
+	/*
+	 * USB 2.0 Section 5.3.2 Pipes: packets must be full size
+	 * except for last one.
+	 */
+	max_packet = usb_maxpacket(urb->dev, urb->pipe);
+	if (max_packet > MAX3421_FIFO_SIZE) {
+		/*
+		 * We do not support isochronous transfers at this
+		 * time...
+		 */
+		dev_err(&spi->dev,
+			"%s: packet-size of %u too big (limit is %u bytes)",
+			__func__, max_packet, MAX3421_FIFO_SIZE);
+		return -EINVAL;
+	}
+
+	if (max3421_hcd->curr_len < max_packet) {
+		if (urb->transfer_flags & URB_SHORT_NOT_OK) {
+			/*
+			 * remaining > 0 and received an
+			 * unexpected partial packet ->
+			 * error
+			 */
+			return -EREMOTEIO;
+		} else
+			/* short read, but it's OK */
+			return 1;
+	}
+	return 0;	/* not done */
+}
+
+/*
+ * Caller must NOT hold HCD spinlock.
+ */
+static int
+max3421_transfer_out_done(struct usb_hcd *hcd, struct urb *urb)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+
+	urb->actual_length += max3421_hcd->curr_len;
+	if (urb->actual_length < urb->transfer_buffer_length)
+		return 0;
+	if (urb->transfer_flags & URB_ZERO_PACKET) {
+		/*
+		 * Some hardware needs a zero-size packet at the end
+		 * of a bulk-out transfer if the last transfer was a
+		 * full-sized packet (i.e., such hardware use <
+		 * max_packet as an indicator that the end of the
+		 * packet has been reached).
+		 */
+		u32 max_packet = usb_maxpacket(urb->dev, urb->pipe);
+
+		if (max3421_hcd->curr_len == max_packet)
+			return 0;
+	}
+	return 1;
+}
+
+/*
+ * Caller must NOT hold HCD spinlock.
+ */
+static void
+max3421_host_transfer_done(struct usb_hcd *hcd)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	struct urb *urb = max3421_hcd->curr_urb;
+	struct max3421_ep *max3421_ep;
+	u8 result_code, hrsl;
+	int urb_done = 0;
+
+	max3421_hcd->hien &= ~(BIT(MAX3421_HI_HXFRDN_BIT) |
+			       BIT(MAX3421_HI_RCVDAV_BIT));
+
+	hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
+	result_code = hrsl & MAX3421_HRSL_RESULT_MASK;
+
+#ifdef DEBUG
+	++max3421_hcd->err_stat[result_code];
+#endif
+
+	max3421_ep = urb->ep->hcpriv;
+
+	if (unlikely(result_code != MAX3421_HRSL_OK)) {
+		max3421_handle_error(hcd, hrsl);
+		return;
+	}
+
+	max3421_ep->naks = 0;
+	max3421_ep->retries = 0;
+	switch (max3421_ep->pkt_state) {
+
+	case PKT_STATE_SETUP:
+		if (urb->transfer_buffer_length > 0)
+			max3421_ep->pkt_state = PKT_STATE_TRANSFER;
+		else
+			max3421_ep->pkt_state = PKT_STATE_TERMINATE;
+		break;
+
+	case PKT_STATE_TRANSFER:
+		if (usb_urb_dir_in(urb))
+			urb_done = max3421_transfer_in_done(hcd, urb);
+		else
+			urb_done = max3421_transfer_out_done(hcd, urb);
+		if (urb_done > 0 && usb_pipetype(urb->pipe) == PIPE_CONTROL) {
+			/*
+			 * We aren't really done - we still need to
+			 * terminate the control transfer:
+			 */
+			max3421_hcd->urb_done = urb_done = 0;
+			max3421_ep->pkt_state = PKT_STATE_TERMINATE;
+		}
+		break;
+
+	case PKT_STATE_TERMINATE:
+		urb_done = 1;
+		break;
+	}
+
+	if (urb_done)
+		max3421_hcd->urb_done = urb_done;
+	else
+		max3421_next_transfer(hcd, 0);
+}
+
+/*
+ * Caller must NOT hold HCD spinlock.
+ */
+static void
+max3421_detect_conn(struct usb_hcd *hcd)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	unsigned int jk, have_conn = 0;
+	u32 old_port_status, chg;
+	unsigned long flags;
+	u8 hrsl, mode;
+
+	hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
+
+	jk = ((((hrsl >> MAX3421_HRSL_JSTATUS_BIT) & 1) << 0) |
+	      (((hrsl >> MAX3421_HRSL_KSTATUS_BIT) & 1) << 1));
+
+	mode = max3421_hcd->mode;
+
+	switch (jk) {
+	case 0x0: /* SE0: disconnect */
+		/*
+		 * Turn off SOFKAENAB bit to avoid getting interrupt
+		 * every milli-second:
+		 */
+		mode &= ~BIT(MAX3421_MODE_SOFKAENAB_BIT);
+		break;
+
+	case 0x1: /* J=0,K=1: low-speed (in full-speed or vice versa) */
+	case 0x2: /* J=1,K=0: full-speed (in full-speed or vice versa) */
+		if (jk == 0x2)
+			/* need to switch to the other speed: */
+			mode ^= BIT(MAX3421_MODE_LOWSPEED_BIT);
+		/* turn on SOFKAENAB bit: */
+		mode |= BIT(MAX3421_MODE_SOFKAENAB_BIT);
+		have_conn = 1;
+		break;
+
+	case 0x3: /* illegal */
+		break;
+	}
+
+	max3421_hcd->mode = mode;
+	spi_wr8(hcd, MAX3421_REG_MODE, max3421_hcd->mode);
+
+	spin_lock_irqsave(&max3421_hcd->lock, flags);
+	old_port_status = max3421_hcd->port_status;
+	if (have_conn)
+		max3421_hcd->port_status |=  USB_PORT_STAT_CONNECTION;
+	else
+		max3421_hcd->port_status &= ~USB_PORT_STAT_CONNECTION;
+	if (mode & BIT(MAX3421_MODE_LOWSPEED_BIT))
+		max3421_hcd->port_status |=  USB_PORT_STAT_LOW_SPEED;
+	else
+		max3421_hcd->port_status &= ~USB_PORT_STAT_LOW_SPEED;
+	chg = (old_port_status ^ max3421_hcd->port_status);
+	max3421_hcd->port_status |= chg << 16;
+	spin_unlock_irqrestore(&max3421_hcd->lock, flags);
+}
+
+static irqreturn_t
+max3421_irq_handler(int irq, void *dev_id)
+{
+	struct usb_hcd *hcd = dev_id;
+	struct spi_device *spi = to_spi_device(hcd->self.controller);
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+
+	if (max3421_hcd->spi_thread)
+		wake_up_process(max3421_hcd->spi_thread);
+	if (!test_and_set_bit(ENABLE_IRQ, &max3421_hcd->todo))
+		disable_irq_nosync(spi->irq);
+	return IRQ_HANDLED;
+}
+
+#ifdef DEBUG
+
+static void
+dump_eps(struct usb_hcd *hcd)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	struct max3421_ep *max3421_ep;
+	struct usb_host_endpoint *ep;
+	char ubuf[512], *dp, *end;
+	unsigned long flags;
+	struct urb *urb;
+	int epnum, ret;
+
+	spin_lock_irqsave(&max3421_hcd->lock, flags);
+	list_for_each_entry(max3421_ep, &max3421_hcd->ep_list, ep_list) {
+		ep = max3421_ep->ep;
+
+		dp = ubuf;
+		end = dp + sizeof(ubuf);
+		*dp = '\0';
+		list_for_each_entry(urb, &ep->urb_list, urb_list) {
+			ret = snprintf(dp, end - dp, " %p(%d.%s %d/%d)", urb,
+				       usb_pipetype(urb->pipe),
+				       usb_urb_dir_in(urb) ? "IN" : "OUT",
+				       urb->actual_length,
+				       urb->transfer_buffer_length);
+			if (ret < 0 || ret >= end - dp)
+				break;	/* error or buffer full */
+			dp += ret;
+		}
+
+		epnum = usb_endpoint_num(&ep->desc);
+		pr_info("EP%0u %u lst %04u rtr %u nak %6u rxmt %u: %s\n",
+			epnum, max3421_ep->pkt_state, max3421_ep->last_active,
+			max3421_ep->retries, max3421_ep->naks,
+			max3421_ep->retransmit, ubuf);
+	}
+	spin_unlock_irqrestore(&max3421_hcd->lock, flags);
+}
+
+#endif /* DEBUG */
+
+/* Return zero if no work was performed, 1 otherwise.  */
+static int
+max3421_handle_irqs(struct usb_hcd *hcd)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	u32 chg, old_port_status;
+	unsigned long flags;
+	u8 hirq;
+
+	/*
+	 * Read and ack pending interrupts (CPU must never
+	 * clear SNDBAV directly and RCVDAV must be cleared by
+	 * max3421_recv_data_available()!):
+	 */
+	hirq = spi_rd8(hcd, MAX3421_REG_HIRQ);
+	hirq &= max3421_hcd->hien;
+	if (!hirq)
+		return 0;
+
+	spi_wr8(hcd, MAX3421_REG_HIRQ,
+		hirq & ~(BIT(MAX3421_HI_SNDBAV_BIT) |
+			 BIT(MAX3421_HI_RCVDAV_BIT)));
+
+	if (hirq & BIT(MAX3421_HI_FRAME_BIT)) {
+		max3421_hcd->frame_number = ((max3421_hcd->frame_number + 1)
+					     & USB_MAX_FRAME_NUMBER);
+		max3421_hcd->sched_pass = SCHED_PASS_PERIODIC;
+	}
+
+	if (hirq & BIT(MAX3421_HI_RCVDAV_BIT))
+		max3421_recv_data_available(hcd);
+
+	if (hirq & BIT(MAX3421_HI_HXFRDN_BIT))
+		max3421_host_transfer_done(hcd);
+
+	if (hirq & BIT(MAX3421_HI_CONDET_BIT))
+		max3421_detect_conn(hcd);
+
+	/*
+	 * Now process interrupts that may affect HCD state
+	 * other than the end-points:
+	 */
+	spin_lock_irqsave(&max3421_hcd->lock, flags);
+
+	old_port_status = max3421_hcd->port_status;
+	if (hirq & BIT(MAX3421_HI_BUSEVENT_BIT)) {
+		if (max3421_hcd->port_status & USB_PORT_STAT_RESET) {
+			/* BUSEVENT due to completion of Bus Reset */
+			max3421_hcd->port_status &= ~USB_PORT_STAT_RESET;
+			max3421_hcd->port_status |=  USB_PORT_STAT_ENABLE;
+		} else {
+			/* BUSEVENT due to completion of Bus Resume */
+			pr_info("%s: BUSEVENT Bus Resume Done\n", __func__);
+		}
+	}
+	if (hirq & BIT(MAX3421_HI_RWU_BIT))
+		pr_info("%s: RWU\n", __func__);
+	if (hirq & BIT(MAX3421_HI_SUSDN_BIT))
+		pr_info("%s: SUSDN\n", __func__);
+
+	chg = (old_port_status ^ max3421_hcd->port_status);
+	max3421_hcd->port_status |= chg << 16;
+
+	spin_unlock_irqrestore(&max3421_hcd->lock, flags);
+
+#ifdef DEBUG
+	{
+		static unsigned long last_time;
+		char sbuf[16 * 16], *dp, *end;
+		int i;
+
+		if (time_after(jiffies, last_time + 5*HZ)) {
+			dp = sbuf;
+			end = sbuf + sizeof(sbuf);
+			*dp = '\0';
+			for (i = 0; i < 16; ++i) {
+				int ret = snprintf(dp, end - dp, " %lu",
+						   max3421_hcd->err_stat[i]);
+				if (ret < 0 || ret >= end - dp)
+					break;	/* error or buffer full */
+				dp += ret;
+			}
+			pr_info("%s: hrsl_stats %s\n", __func__, sbuf);
+			memset(max3421_hcd->err_stat, 0,
+			       sizeof(max3421_hcd->err_stat));
+			last_time = jiffies;
+
+			dump_eps(hcd);
+		}
+	}
+#endif
+	return 1;
+}
+
+static int
+max3421_reset_hcd(struct usb_hcd *hcd)
+{
+	struct spi_device *spi = to_spi_device(hcd->self.controller);
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	int timeout;
+
+	/* perform a chip reset and wait for OSCIRQ signal to appear: */
+	spi_wr8(hcd, MAX3421_REG_USBCTL, BIT(MAX3421_USBCTL_CHIPRES_BIT));
+	/* clear reset: */
+	spi_wr8(hcd, MAX3421_REG_USBCTL, 0);
+	timeout = 1000;
+	while (1) {
+		if (spi_rd8(hcd, MAX3421_REG_USBIRQ)
+		    & BIT(MAX3421_USBIRQ_OSCOKIRQ_BIT))
+			break;
+		if (--timeout < 0) {
+			dev_err(&spi->dev,
+				"timed out waiting for oscillator OK signal");
+			return 1;
+		}
+		cond_resched();
+	}
+
+	/*
+	 * Turn on host mode, automatic generation of SOF packets, and
+	 * enable pull-down registers on DM/DP:
+	 */
+	max3421_hcd->mode = (BIT(MAX3421_MODE_HOST_BIT) |
+			     BIT(MAX3421_MODE_SOFKAENAB_BIT) |
+			     BIT(MAX3421_MODE_DMPULLDN_BIT) |
+			     BIT(MAX3421_MODE_DPPULLDN_BIT));
+	spi_wr8(hcd, MAX3421_REG_MODE, max3421_hcd->mode);
+
+	/* reset frame-number: */
+	max3421_hcd->frame_number = USB_MAX_FRAME_NUMBER;
+	spi_wr8(hcd, MAX3421_REG_HCTL, BIT(MAX3421_HCTL_FRMRST_BIT));
+
+	/* sample the state of the D+ and D- lines */
+	spi_wr8(hcd, MAX3421_REG_HCTL, BIT(MAX3421_HCTL_SAMPLEBUS_BIT));
+	max3421_detect_conn(hcd);
+
+	/* enable frame, connection-detected, and bus-event interrupts: */
+	max3421_hcd->hien = (BIT(MAX3421_HI_FRAME_BIT) |
+			     BIT(MAX3421_HI_CONDET_BIT) |
+			     BIT(MAX3421_HI_BUSEVENT_BIT));
+	spi_wr8(hcd, MAX3421_REG_HIEN, max3421_hcd->hien);
+
+	/* enable interrupts: */
+	spi_wr8(hcd, MAX3421_REG_CPUCTL, BIT(MAX3421_CPUCTL_IE_BIT));
+	return 1;
+}
+
+static int
+max3421_urb_done(struct usb_hcd *hcd)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	unsigned long flags;
+	struct urb *urb;
+	int status;
+
+	status = max3421_hcd->urb_done;
+	max3421_hcd->urb_done = 0;
+	if (status > 0)
+		status = 0;
+	urb = max3421_hcd->curr_urb;
+	if (urb) {
+		/* save the old end-points toggles: */
+		u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
+		int rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1;
+		int sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1;
+		int epnum = usb_endpoint_num(&urb->ep->desc);
+
+		/* no locking: HCD (i.e., we) own toggles, don't we? */
+		usb_settoggle(urb->dev, epnum, 0, rcvtog);
+		usb_settoggle(urb->dev, epnum, 1, sndtog);
+
+		max3421_hcd->curr_urb = NULL;
+		spin_lock_irqsave(&max3421_hcd->lock, flags);
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		spin_unlock_irqrestore(&max3421_hcd->lock, flags);
+
+		/* must be called without the HCD spinlock: */
+		usb_hcd_giveback_urb(hcd, urb, status);
+	}
+	return 1;
+}
+
+static int
+max3421_spi_thread(void *dev_id)
+{
+	struct usb_hcd *hcd = dev_id;
+	struct spi_device *spi = to_spi_device(hcd->self.controller);
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	int i, i_worked = 1;
+
+	/* set full-duplex SPI mode, low-active interrupt pin: */
+	spi_wr8(hcd, MAX3421_REG_PINCTL,
+		(BIT(MAX3421_PINCTL_FDUPSPI_BIT) |	/* full-duplex */
+		 BIT(MAX3421_PINCTL_INTLEVEL_BIT)));	/* low-active irq */
+
+	while (!kthread_should_stop()) {
+		max3421_hcd->rev = spi_rd8(hcd, MAX3421_REG_REVISION);
+		if (max3421_hcd->rev == 0x12 || max3421_hcd->rev == 0x13)
+			break;
+		dev_err(&spi->dev, "bad rev 0x%02x", max3421_hcd->rev);
+		msleep(10000);
+	}
+	dev_info(&spi->dev, "rev 0x%x, SPI clk %dHz, bpw %u, irq %d\n",
+		 max3421_hcd->rev, spi->max_speed_hz, spi->bits_per_word,
+		 spi->irq);
+
+	while (!kthread_should_stop()) {
+		if (!i_worked) {
+			/*
+			 * We'll be waiting for wakeups from the hard
+			 * interrupt handler, so now is a good time to
+			 * sync our hien with the chip:
+			 */
+			spi_wr8(hcd, MAX3421_REG_HIEN, max3421_hcd->hien);
+
+			set_current_state(TASK_INTERRUPTIBLE);
+			if (test_and_clear_bit(ENABLE_IRQ, &max3421_hcd->todo))
+				enable_irq(spi->irq);
+			schedule();
+			__set_current_state(TASK_RUNNING);
+		}
+
+		i_worked = 0;
+
+		if (max3421_hcd->urb_done)
+			i_worked |= max3421_urb_done(hcd);
+		else if (max3421_handle_irqs(hcd))
+			i_worked = 1;
+		else if (!max3421_hcd->curr_urb)
+			i_worked |= max3421_select_and_start_urb(hcd);
+
+		if (test_and_clear_bit(RESET_HCD, &max3421_hcd->todo))
+			/* reset the HCD: */
+			i_worked |= max3421_reset_hcd(hcd);
+		if (test_and_clear_bit(RESET_PORT, &max3421_hcd->todo)) {
+			/* perform a USB bus reset: */
+			spi_wr8(hcd, MAX3421_REG_HCTL,
+				BIT(MAX3421_HCTL_BUSRST_BIT));
+			i_worked = 1;
+		}
+		if (test_and_clear_bit(CHECK_UNLINK, &max3421_hcd->todo))
+			i_worked |= max3421_check_unlink(hcd);
+		if (test_and_clear_bit(IOPIN_UPDATE, &max3421_hcd->todo)) {
+			/*
+			 * IOPINS1/IOPINS2 do not auto-increment, so we can't
+			 * use spi_wr_buf().
+			 */
+			for (i = 0; i < ARRAY_SIZE(max3421_hcd->iopins); ++i) {
+				u8 val = spi_rd8(hcd, MAX3421_REG_IOPINS1 + i);
+
+				val = ((val & 0xf0) |
+				       (max3421_hcd->iopins[i] & 0x0f));
+				spi_wr8(hcd, MAX3421_REG_IOPINS1 + i, val);
+				max3421_hcd->iopins[i] = val;
+			}
+			i_worked = 1;
+		}
+	}
+	set_current_state(TASK_RUNNING);
+	dev_info(&spi->dev, "SPI thread exiting");
+	return 0;
+}
+
+static int
+max3421_reset_port(struct usb_hcd *hcd)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+
+	max3421_hcd->port_status &= ~(USB_PORT_STAT_ENABLE |
+				      USB_PORT_STAT_LOW_SPEED);
+	max3421_hcd->port_status |= USB_PORT_STAT_RESET;
+	set_bit(RESET_PORT, &max3421_hcd->todo);
+	wake_up_process(max3421_hcd->spi_thread);
+	return 0;
+}
+
+static int
+max3421_reset(struct usb_hcd *hcd)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+
+	hcd->self.sg_tablesize = 0;
+	hcd->speed = HCD_USB2;
+	hcd->self.root_hub->speed = USB_SPEED_FULL;
+	set_bit(RESET_HCD, &max3421_hcd->todo);
+	wake_up_process(max3421_hcd->spi_thread);
+	return 0;
+}
+
+static int
+max3421_start(struct usb_hcd *hcd)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+
+	spin_lock_init(&max3421_hcd->lock);
+	max3421_hcd->rh_state = MAX3421_RH_RUNNING;
+
+	INIT_LIST_HEAD(&max3421_hcd->ep_list);
+
+	hcd->power_budget = POWER_BUDGET;
+	hcd->state = HC_STATE_RUNNING;
+	hcd->uses_new_polling = 1;
+	return 0;
+}
+
+static void
+max3421_stop(struct usb_hcd *hcd)
+{
+}
+
+static int
+max3421_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
+{
+	struct spi_device *spi = to_spi_device(hcd->self.controller);
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	struct max3421_ep *max3421_ep;
+	unsigned long flags;
+	int retval;
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_INTERRUPT:
+	case PIPE_ISOCHRONOUS:
+		if (urb->interval < 0) {
+			dev_err(&spi->dev,
+			  "%s: interval=%d for intr-/iso-pipe; expected > 0\n",
+				__func__, urb->interval);
+			return -EINVAL;
+		}
+		break;
+	default:
+		break;
+	}
+
+	spin_lock_irqsave(&max3421_hcd->lock, flags);
+
+	max3421_ep = urb->ep->hcpriv;
+	if (!max3421_ep) {
+		/* gets freed in max3421_endpoint_disable: */
+		max3421_ep = kzalloc(sizeof(struct max3421_ep), GFP_ATOMIC);
+		if (!max3421_ep) {
+			retval = -ENOMEM;
+			goto out;
+		}
+		max3421_ep->ep = urb->ep;
+		max3421_ep->last_active = max3421_hcd->frame_number;
+		urb->ep->hcpriv = max3421_ep;
+
+		list_add_tail(&max3421_ep->ep_list, &max3421_hcd->ep_list);
+	}
+
+	retval = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (retval == 0) {
+		/* Since we added to the queue, restart scheduling: */
+		max3421_hcd->sched_pass = SCHED_PASS_PERIODIC;
+		wake_up_process(max3421_hcd->spi_thread);
+	}
+
+out:
+	spin_unlock_irqrestore(&max3421_hcd->lock, flags);
+	return retval;
+}
+
+static int
+max3421_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	unsigned long flags;
+	int retval;
+
+	spin_lock_irqsave(&max3421_hcd->lock, flags);
+
+	/*
+	 * This will set urb->unlinked which in turn causes the entry
+	 * to be dropped at the next opportunity.
+	 */
+	retval = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (retval == 0) {
+		set_bit(CHECK_UNLINK, &max3421_hcd->todo);
+		wake_up_process(max3421_hcd->spi_thread);
+	}
+	spin_unlock_irqrestore(&max3421_hcd->lock, flags);
+	return retval;
+}
+
+static void
+max3421_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	unsigned long flags;
+
+	spin_lock_irqsave(&max3421_hcd->lock, flags);
+
+	if (ep->hcpriv) {
+		struct max3421_ep *max3421_ep = ep->hcpriv;
+
+		/* remove myself from the ep_list: */
+		if (!list_empty(&max3421_ep->ep_list))
+			list_del(&max3421_ep->ep_list);
+		kfree(max3421_ep);
+		ep->hcpriv = NULL;
+	}
+
+	spin_unlock_irqrestore(&max3421_hcd->lock, flags);
+}
+
+static int
+max3421_get_frame_number(struct usb_hcd *hcd)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	return max3421_hcd->frame_number;
+}
+
+/*
+ * Should return a non-zero value when any port is undergoing a resume
+ * transition while the root hub is suspended.
+ */
+static int
+max3421_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	unsigned long flags;
+	int retval = 0;
+
+	spin_lock_irqsave(&max3421_hcd->lock, flags);
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		goto done;
+
+	*buf = 0;
+	if ((max3421_hcd->port_status & PORT_C_MASK) != 0) {
+		*buf = (1 << 1); /* a hub over-current condition exists */
+		dev_dbg(hcd->self.controller,
+			"port status 0x%08x has changes\n",
+			max3421_hcd->port_status);
+		retval = 1;
+		if (max3421_hcd->rh_state == MAX3421_RH_SUSPENDED)
+			usb_hcd_resume_root_hub(hcd);
+	}
+done:
+	spin_unlock_irqrestore(&max3421_hcd->lock, flags);
+	return retval;
+}
+
+static inline void
+hub_descriptor(struct usb_hub_descriptor *desc)
+{
+	memset(desc, 0, sizeof(*desc));
+	/*
+	 * See Table 11-13: Hub Descriptor in USB 2.0 spec.
+	 */
+	desc->bDescriptorType = USB_DT_HUB; /* hub descriptor */
+	desc->bDescLength = 9;
+	desc->wHubCharacteristics = cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM |
+						HUB_CHAR_COMMON_OCPM);
+	desc->bNbrPorts = 1;
+}
+
+/*
+ * Set the MAX3421E general-purpose output with number PIN_NUMBER to
+ * VALUE (0 or 1).  PIN_NUMBER may be in the range from 1-8.  For
+ * any other value, this function acts as a no-op.
+ */
+static void
+max3421_gpout_set_value(struct usb_hcd *hcd, u8 pin_number, u8 value)
+{
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	u8 mask, idx;
+
+	--pin_number;
+	if (pin_number >= MAX3421_GPOUT_COUNT)
+		return;
+
+	mask = 1u << (pin_number % 4);
+	idx = pin_number / 4;
+
+	if (value)
+		max3421_hcd->iopins[idx] |=  mask;
+	else
+		max3421_hcd->iopins[idx] &= ~mask;
+	set_bit(IOPIN_UPDATE, &max3421_hcd->todo);
+	wake_up_process(max3421_hcd->spi_thread);
+}
+
+static int
+max3421_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value, u16 index,
+		    char *buf, u16 length)
+{
+	struct spi_device *spi = to_spi_device(hcd->self.controller);
+	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
+	struct max3421_hcd_platform_data *pdata;
+	unsigned long flags;
+	int retval = 0;
+
+	pdata = spi->dev.platform_data;
+
+	spin_lock_irqsave(&max3421_hcd->lock, flags);
+
+	switch (type_req) {
+	case ClearHubFeature:
+		break;
+	case ClearPortFeature:
+		switch (value) {
+		case USB_PORT_FEAT_SUSPEND:
+			break;
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(hcd->self.controller, "power-off\n");
+			max3421_gpout_set_value(hcd, pdata->vbus_gpout,
+						!pdata->vbus_active_level);
+			fallthrough;
+		default:
+			max3421_hcd->port_status &= ~(1 << value);
+		}
+		break;
+	case GetHubDescriptor:
+		hub_descriptor((struct usb_hub_descriptor *) buf);
+		break;
+
+	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+	case GetPortErrorCount:
+	case SetHubDepth:
+		/* USB3 only */
+		goto error;
+
+	case GetHubStatus:
+		*(__le32 *) buf = cpu_to_le32(0);
+		break;
+
+	case GetPortStatus:
+		if (index != 1) {
+			retval = -EPIPE;
+			goto error;
+		}
+		((__le16 *) buf)[0] = cpu_to_le16(max3421_hcd->port_status);
+		((__le16 *) buf)[1] =
+			cpu_to_le16(max3421_hcd->port_status >> 16);
+		break;
+
+	case SetHubFeature:
+		retval = -EPIPE;
+		break;
+
+	case SetPortFeature:
+		switch (value) {
+		case USB_PORT_FEAT_LINK_STATE:
+		case USB_PORT_FEAT_U1_TIMEOUT:
+		case USB_PORT_FEAT_U2_TIMEOUT:
+		case USB_PORT_FEAT_BH_PORT_RESET:
+			goto error;
+		case USB_PORT_FEAT_SUSPEND:
+			if (max3421_hcd->active)
+				max3421_hcd->port_status |=
+					USB_PORT_STAT_SUSPEND;
+			break;
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(hcd->self.controller, "power-on\n");
+			max3421_hcd->port_status |= USB_PORT_STAT_POWER;
+			max3421_gpout_set_value(hcd, pdata->vbus_gpout,
+						pdata->vbus_active_level);
+			break;
+		case USB_PORT_FEAT_RESET:
+			max3421_reset_port(hcd);
+			fallthrough;
+		default:
+			if ((max3421_hcd->port_status & USB_PORT_STAT_POWER)
+			    != 0)
+				max3421_hcd->port_status |= (1 << value);
+		}
+		break;
+
+	default:
+		dev_dbg(hcd->self.controller,
+			"hub control req%04x v%04x i%04x l%d\n",
+			type_req, value, index, length);
+error:		/* "protocol stall" on error */
+		retval = -EPIPE;
+	}
+
+	spin_unlock_irqrestore(&max3421_hcd->lock, flags);
+	return retval;
+}
+
+static int
+max3421_bus_suspend(struct usb_hcd *hcd)
+{
+	return -1;
+}
+
+static int
+max3421_bus_resume(struct usb_hcd *hcd)
+{
+	return -1;
+}
+
+static const struct hc_driver max3421_hcd_desc = {
+	.description =		"max3421",
+	.product_desc =		DRIVER_DESC,
+	.hcd_priv_size =	sizeof(struct max3421_hcd),
+	.flags =		HCD_USB11,
+	.reset =		max3421_reset,
+	.start =		max3421_start,
+	.stop =			max3421_stop,
+	.get_frame_number =	max3421_get_frame_number,
+	.urb_enqueue =		max3421_urb_enqueue,
+	.urb_dequeue =		max3421_urb_dequeue,
+	.endpoint_disable =	max3421_endpoint_disable,
+	.hub_status_data =	max3421_hub_status_data,
+	.hub_control =		max3421_hub_control,
+	.bus_suspend =		max3421_bus_suspend,
+	.bus_resume =		max3421_bus_resume,
+};
+
+static int
+max3421_of_vbus_en_pin(struct device *dev, struct max3421_hcd_platform_data *pdata)
+{
+	int retval;
+	uint32_t value[2];
+
+	if (!pdata)
+		return -EINVAL;
+
+	retval = of_property_read_u32_array(dev->of_node, "maxim,vbus-en-pin", value, 2);
+	if (retval) {
+		dev_err(dev, "device tree node property 'maxim,vbus-en-pin' is missing\n");
+		return retval;
+	}
+	dev_info(dev, "property 'maxim,vbus-en-pin' value is <%d %d>\n", value[0], value[1]);
+
+	pdata->vbus_gpout = value[0];
+	pdata->vbus_active_level = value[1];
+
+	return 0;
+}
+
+static int
+max3421_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct max3421_hcd *max3421_hcd;
+	struct usb_hcd *hcd = NULL;
+	struct max3421_hcd_platform_data *pdata = NULL;
+	int retval;
+
+	if (spi_setup(spi) < 0) {
+		dev_err(&spi->dev, "Unable to setup SPI bus");
+		return -EFAULT;
+	}
+
+	if (!spi->irq) {
+		dev_err(dev, "Failed to get SPI IRQ");
+		return -EFAULT;
+	}
+
+	if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
+		pdata = devm_kzalloc(&spi->dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata) {
+			retval = -ENOMEM;
+			goto error;
+		}
+		retval = max3421_of_vbus_en_pin(dev, pdata);
+		if (retval)
+			goto error;
+
+		spi->dev.platform_data = pdata;
+	}
+
+	pdata = spi->dev.platform_data;
+	if (!pdata) {
+		dev_err(&spi->dev, "driver configuration data is not provided\n");
+		retval = -EFAULT;
+		goto error;
+	}
+	if (pdata->vbus_active_level > 1) {
+		dev_err(&spi->dev, "vbus active level value %d is out of range (0/1)\n", pdata->vbus_active_level);
+		retval = -EINVAL;
+		goto error;
+	}
+	if (pdata->vbus_gpout < 1 || pdata->vbus_gpout > MAX3421_GPOUT_COUNT) {
+		dev_err(&spi->dev, "vbus gpout value %d is out of range (1..8)\n", pdata->vbus_gpout);
+		retval = -EINVAL;
+		goto error;
+	}
+
+	retval = -ENOMEM;
+	hcd = usb_create_hcd(&max3421_hcd_desc, &spi->dev,
+			     dev_name(&spi->dev));
+	if (!hcd) {
+		dev_err(&spi->dev, "failed to create HCD structure\n");
+		goto error;
+	}
+	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	max3421_hcd = hcd_to_max3421(hcd);
+	INIT_LIST_HEAD(&max3421_hcd->ep_list);
+	spi_set_drvdata(spi, max3421_hcd);
+
+	max3421_hcd->tx = kmalloc(sizeof(*max3421_hcd->tx), GFP_KERNEL);
+	if (!max3421_hcd->tx)
+		goto error;
+	max3421_hcd->rx = kmalloc(sizeof(*max3421_hcd->rx), GFP_KERNEL);
+	if (!max3421_hcd->rx)
+		goto error;
+
+	max3421_hcd->spi_thread = kthread_run(max3421_spi_thread, hcd,
+					      "max3421_spi_thread");
+	if (max3421_hcd->spi_thread == ERR_PTR(-ENOMEM)) {
+		dev_err(&spi->dev,
+			"failed to create SPI thread (out of memory)\n");
+		goto error;
+	}
+
+	retval = usb_add_hcd(hcd, 0, 0);
+	if (retval) {
+		dev_err(&spi->dev, "failed to add HCD\n");
+		goto error;
+	}
+
+	retval = request_irq(spi->irq, max3421_irq_handler,
+			     IRQF_TRIGGER_LOW, "max3421", hcd);
+	if (retval < 0) {
+		dev_err(&spi->dev, "failed to request irq %d\n", spi->irq);
+		goto error;
+	}
+	return 0;
+
+error:
+	if (IS_ENABLED(CONFIG_OF) && dev->of_node && pdata) {
+		devm_kfree(&spi->dev, pdata);
+		spi->dev.platform_data = NULL;
+	}
+
+	if (hcd) {
+		kfree(max3421_hcd->tx);
+		kfree(max3421_hcd->rx);
+		if (max3421_hcd->spi_thread)
+			kthread_stop(max3421_hcd->spi_thread);
+		usb_put_hcd(hcd);
+	}
+	return retval;
+}
+
+static void
+max3421_remove(struct spi_device *spi)
+{
+	struct max3421_hcd *max3421_hcd;
+	struct usb_hcd *hcd;
+	unsigned long flags;
+
+	max3421_hcd = spi_get_drvdata(spi);
+	hcd = max3421_to_hcd(max3421_hcd);
+
+	usb_remove_hcd(hcd);
+
+	spin_lock_irqsave(&max3421_hcd->lock, flags);
+
+	kthread_stop(max3421_hcd->spi_thread);
+
+	spin_unlock_irqrestore(&max3421_hcd->lock, flags);
+
+	free_irq(spi->irq, hcd);
+
+	usb_put_hcd(hcd);
+}
+
+static const struct of_device_id max3421_of_match_table[] = {
+	{ .compatible = "maxim,max3421", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, max3421_of_match_table);
+
+static struct spi_driver max3421_driver = {
+	.probe		= max3421_probe,
+	.remove		= max3421_remove,
+	.driver		= {
+		.name	= "max3421-hcd",
+		.of_match_table = of_match_ptr(max3421_of_match_table),
+	},
+};
+
+module_spi_driver(max3421_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("David Mosberger <davidm@egauge.net>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/octeon-hcd.c b/drivers/usb/host/octeon-hcd.c
new file mode 100644
index 000000000..a1cd81d4a
--- /dev/null
+++ b/drivers/usb/host/octeon-hcd.c
@@ -0,0 +1,3740 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Cavium Networks
+ *
+ * Some parts of the code were originally released under BSD license:
+ *
+ * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
+ * reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *
+ *   * Redistributions in binary form must reproduce the above
+ *     copyright notice, this list of conditions and the following
+ *     disclaimer in the documentation and/or other materials provided
+ *     with the distribution.
+ *
+ *   * Neither the name of Cavium Networks nor the names of
+ *     its contributors may be used to endorse or promote products
+ *     derived from this software without specific prior written
+ *     permission.
+ *
+ * This Software, including technical data, may be subject to U.S. export
+ * control laws, including the U.S. Export Administration Act and its associated
+ * regulations, and may be subject to export or import regulations in other
+ * countries.
+ *
+ * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
+ * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
+ * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
+ * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION
+ * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
+ * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
+ * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
+ * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+ * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
+ * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
+ */
+
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/hcd.h>
+#include <linux/prefetch.h>
+#include <linux/irqdomain.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#include <asm/octeon/octeon.h>
+
+#include "octeon-hcd.h"
+
+/**
+ * enum cvmx_usb_speed - the possible USB device speeds
+ *
+ * @CVMX_USB_SPEED_HIGH: Device is operation at 480Mbps
+ * @CVMX_USB_SPEED_FULL: Device is operation at 12Mbps
+ * @CVMX_USB_SPEED_LOW:  Device is operation at 1.5Mbps
+ */
+enum cvmx_usb_speed {
+	CVMX_USB_SPEED_HIGH = 0,
+	CVMX_USB_SPEED_FULL = 1,
+	CVMX_USB_SPEED_LOW = 2,
+};
+
+/**
+ * enum cvmx_usb_transfer - the possible USB transfer types
+ *
+ * @CVMX_USB_TRANSFER_CONTROL:	   USB transfer type control for hub and status
+ *				   transfers
+ * @CVMX_USB_TRANSFER_ISOCHRONOUS: USB transfer type isochronous for low
+ *				   priority periodic transfers
+ * @CVMX_USB_TRANSFER_BULK:	   USB transfer type bulk for large low priority
+ *				   transfers
+ * @CVMX_USB_TRANSFER_INTERRUPT:   USB transfer type interrupt for high priority
+ *				   periodic transfers
+ */
+enum cvmx_usb_transfer {
+	CVMX_USB_TRANSFER_CONTROL = 0,
+	CVMX_USB_TRANSFER_ISOCHRONOUS = 1,
+	CVMX_USB_TRANSFER_BULK = 2,
+	CVMX_USB_TRANSFER_INTERRUPT = 3,
+};
+
+/**
+ * enum cvmx_usb_direction - the transfer directions
+ *
+ * @CVMX_USB_DIRECTION_OUT: Data is transferring from Octeon to the device/host
+ * @CVMX_USB_DIRECTION_IN:  Data is transferring from the device/host to Octeon
+ */
+enum cvmx_usb_direction {
+	CVMX_USB_DIRECTION_OUT,
+	CVMX_USB_DIRECTION_IN,
+};
+
+/**
+ * enum cvmx_usb_status - possible callback function status codes
+ *
+ * @CVMX_USB_STATUS_OK:		  The transaction / operation finished without
+ *				  any errors
+ * @CVMX_USB_STATUS_SHORT:	  FIXME: This is currently not implemented
+ * @CVMX_USB_STATUS_CANCEL:	  The transaction was canceled while in flight
+ *				  by a user call to cvmx_usb_cancel
+ * @CVMX_USB_STATUS_ERROR:	  The transaction aborted with an unexpected
+ *				  error status
+ * @CVMX_USB_STATUS_STALL:	  The transaction received a USB STALL response
+ *				  from the device
+ * @CVMX_USB_STATUS_XACTERR:	  The transaction failed with an error from the
+ *				  device even after a number of retries
+ * @CVMX_USB_STATUS_DATATGLERR:	  The transaction failed with a data toggle
+ *				  error even after a number of retries
+ * @CVMX_USB_STATUS_BABBLEERR:	  The transaction failed with a babble error
+ * @CVMX_USB_STATUS_FRAMEERR:	  The transaction failed with a frame error
+ *				  even after a number of retries
+ */
+enum cvmx_usb_status {
+	CVMX_USB_STATUS_OK,
+	CVMX_USB_STATUS_SHORT,
+	CVMX_USB_STATUS_CANCEL,
+	CVMX_USB_STATUS_ERROR,
+	CVMX_USB_STATUS_STALL,
+	CVMX_USB_STATUS_XACTERR,
+	CVMX_USB_STATUS_DATATGLERR,
+	CVMX_USB_STATUS_BABBLEERR,
+	CVMX_USB_STATUS_FRAMEERR,
+};
+
+/**
+ * struct cvmx_usb_port_status - the USB port status information
+ *
+ * @port_enabled:	1 = Usb port is enabled, 0 = disabled
+ * @port_over_current:	1 = Over current detected, 0 = Over current not
+ *			detected. Octeon doesn't support over current detection.
+ * @port_powered:	1 = Port power is being supplied to the device, 0 =
+ *			power is off. Octeon doesn't support turning port power
+ *			off.
+ * @port_speed:		Current port speed.
+ * @connected:		1 = A device is connected to the port, 0 = No device is
+ *			connected.
+ * @connect_change:	1 = Device connected state changed since the last set
+ *			status call.
+ */
+struct cvmx_usb_port_status {
+	u32 reserved			: 25;
+	u32 port_enabled		: 1;
+	u32 port_over_current		: 1;
+	u32 port_powered		: 1;
+	enum cvmx_usb_speed port_speed	: 2;
+	u32 connected			: 1;
+	u32 connect_change		: 1;
+};
+
+/**
+ * struct cvmx_usb_iso_packet - descriptor for Isochronous packets
+ *
+ * @offset:	This is the offset in bytes into the main buffer where this data
+ *		is stored.
+ * @length:	This is the length in bytes of the data.
+ * @status:	This is the status of this individual packet transfer.
+ */
+struct cvmx_usb_iso_packet {
+	int offset;
+	int length;
+	enum cvmx_usb_status status;
+};
+
+/**
+ * enum cvmx_usb_initialize_flags - flags used by the initialization function
+ *
+ * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI:    The USB port uses a 12MHz crystal
+ *					      as clock source at USB_XO and
+ *					      USB_XI.
+ * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND:   The USB port uses 12/24/48MHz 2.5V
+ *					      board clock source at USB_XO.
+ *					      USB_XI should be tied to GND.
+ * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK: Mask for clock speed field
+ * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ:    Speed of reference clock or
+ *					      crystal
+ * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ:    Speed of reference clock
+ * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ:    Speed of reference clock
+ * @CVMX_USB_INITIALIZE_FLAGS_NO_DMA:	      Disable DMA and used polled IO for
+ *					      data transfer use for the USB
+ */
+enum cvmx_usb_initialize_flags {
+	CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI		= 1 << 0,
+	CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND		= 1 << 1,
+	CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK	= 3 << 3,
+	CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ		= 1 << 3,
+	CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ		= 2 << 3,
+	CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ		= 3 << 3,
+	/* Bits 3-4 used to encode the clock frequency */
+	CVMX_USB_INITIALIZE_FLAGS_NO_DMA		= 1 << 5,
+};
+
+/**
+ * enum cvmx_usb_pipe_flags - internal flags for a pipe.
+ *
+ * @CVMX_USB_PIPE_FLAGS_SCHEDULED: Used internally to determine if a pipe is
+ *				   actively using hardware.
+ * @CVMX_USB_PIPE_FLAGS_NEED_PING: Used internally to determine if a high speed
+ *				   pipe is in the ping state.
+ */
+enum cvmx_usb_pipe_flags {
+	CVMX_USB_PIPE_FLAGS_SCHEDULED	= 1 << 17,
+	CVMX_USB_PIPE_FLAGS_NEED_PING	= 1 << 18,
+};
+
+/* Maximum number of times to retry failed transactions */
+#define MAX_RETRIES		3
+
+/* Maximum number of hardware channels supported by the USB block */
+#define MAX_CHANNELS		8
+
+/*
+ * The low level hardware can transfer a maximum of this number of bytes in each
+ * transfer. The field is 19 bits wide
+ */
+#define MAX_TRANSFER_BYTES	((1 << 19) - 1)
+
+/*
+ * The low level hardware can transfer a maximum of this number of packets in
+ * each transfer. The field is 10 bits wide
+ */
+#define MAX_TRANSFER_PACKETS	((1 << 10) - 1)
+
+/**
+ * Logical transactions may take numerous low level
+ * transactions, especially when splits are concerned. This
+ * enum represents all of the possible stages a transaction can
+ * be in. Note that split completes are always even. This is so
+ * the NAK handler can backup to the previous low level
+ * transaction with a simple clearing of bit 0.
+ */
+enum cvmx_usb_stage {
+	CVMX_USB_STAGE_NON_CONTROL,
+	CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE,
+	CVMX_USB_STAGE_SETUP,
+	CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE,
+	CVMX_USB_STAGE_DATA,
+	CVMX_USB_STAGE_DATA_SPLIT_COMPLETE,
+	CVMX_USB_STAGE_STATUS,
+	CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE,
+};
+
+/**
+ * struct cvmx_usb_transaction - describes each pending USB transaction
+ *				 regardless of type. These are linked together
+ *				 to form a list of pending requests for a pipe.
+ *
+ * @node:		List node for transactions in the pipe.
+ * @type:		Type of transaction, duplicated of the pipe.
+ * @flags:		State flags for this transaction.
+ * @buffer:		User's physical buffer address to read/write.
+ * @buffer_length:	Size of the user's buffer in bytes.
+ * @control_header:	For control transactions, physical address of the 8
+ *			byte standard header.
+ * @iso_start_frame:	For ISO transactions, the starting frame number.
+ * @iso_number_packets:	For ISO transactions, the number of packets in the
+ *			request.
+ * @iso_packets:	For ISO transactions, the sub packets in the request.
+ * @actual_bytes:	Actual bytes transfer for this transaction.
+ * @stage:		For control transactions, the current stage.
+ * @urb:		URB.
+ */
+struct cvmx_usb_transaction {
+	struct list_head node;
+	enum cvmx_usb_transfer type;
+	u64 buffer;
+	int buffer_length;
+	u64 control_header;
+	int iso_start_frame;
+	int iso_number_packets;
+	struct cvmx_usb_iso_packet *iso_packets;
+	int xfersize;
+	int pktcnt;
+	int retries;
+	int actual_bytes;
+	enum cvmx_usb_stage stage;
+	struct urb *urb;
+};
+
+/**
+ * struct cvmx_usb_pipe - a pipe represents a virtual connection between Octeon
+ *			  and some USB device. It contains a list of pending
+ *			  request to the device.
+ *
+ * @node:		List node for pipe list
+ * @next:		Pipe after this one in the list
+ * @transactions:	List of pending transactions
+ * @interval:		For periodic pipes, the interval between packets in
+ *			frames
+ * @next_tx_frame:	The next frame this pipe is allowed to transmit on
+ * @flags:		State flags for this pipe
+ * @device_speed:	Speed of device connected to this pipe
+ * @transfer_type:	Type of transaction supported by this pipe
+ * @transfer_dir:	IN or OUT. Ignored for Control
+ * @multi_count:	Max packet in a row for the device
+ * @max_packet:		The device's maximum packet size in bytes
+ * @device_addr:	USB device address at other end of pipe
+ * @endpoint_num:	USB endpoint number at other end of pipe
+ * @hub_device_addr:	Hub address this device is connected to
+ * @hub_port:		Hub port this device is connected to
+ * @pid_toggle:		This toggles between 0/1 on every packet send to track
+ *			the data pid needed
+ * @channel:		Hardware DMA channel for this pipe
+ * @split_sc_frame:	The low order bits of the frame number the split
+ *			complete should be sent on
+ */
+struct cvmx_usb_pipe {
+	struct list_head node;
+	struct list_head transactions;
+	u64 interval;
+	u64 next_tx_frame;
+	enum cvmx_usb_pipe_flags flags;
+	enum cvmx_usb_speed device_speed;
+	enum cvmx_usb_transfer transfer_type;
+	enum cvmx_usb_direction transfer_dir;
+	int multi_count;
+	u16 max_packet;
+	u8 device_addr;
+	u8 endpoint_num;
+	u8 hub_device_addr;
+	u8 hub_port;
+	u8 pid_toggle;
+	u8 channel;
+	s8 split_sc_frame;
+};
+
+struct cvmx_usb_tx_fifo {
+	struct {
+		int channel;
+		int size;
+		u64 address;
+	} entry[MAX_CHANNELS + 1];
+	int head;
+	int tail;
+};
+
+/**
+ * struct octeon_hcd - the state of the USB block
+ *
+ * lock:		   Serialization lock.
+ * init_flags:		   Flags passed to initialize.
+ * index:		   Which USB block this is for.
+ * idle_hardware_channels: Bit set for every idle hardware channel.
+ * usbcx_hprt:		   Stored port status so we don't need to read a CSR to
+ *			   determine splits.
+ * pipe_for_channel:	   Map channels to pipes.
+ * pipe:		   Storage for pipes.
+ * indent:		   Used by debug output to indent functions.
+ * port_status:		   Last port status used for change notification.
+ * idle_pipes:		   List of open pipes that have no transactions.
+ * active_pipes:	   Active pipes indexed by transfer type.
+ * frame_number:	   Increments every SOF interrupt for time keeping.
+ * active_split:	   Points to the current active split, or NULL.
+ */
+struct octeon_hcd {
+	spinlock_t lock; /* serialization lock */
+	int init_flags;
+	int index;
+	int idle_hardware_channels;
+	union cvmx_usbcx_hprt usbcx_hprt;
+	struct cvmx_usb_pipe *pipe_for_channel[MAX_CHANNELS];
+	int indent;
+	struct cvmx_usb_port_status port_status;
+	struct list_head idle_pipes;
+	struct list_head active_pipes[4];
+	u64 frame_number;
+	struct cvmx_usb_transaction *active_split;
+	struct cvmx_usb_tx_fifo periodic;
+	struct cvmx_usb_tx_fifo nonperiodic;
+};
+
+/*
+ * This macro logically sets a single field in a CSR. It does the sequence
+ * read, modify, and write
+ */
+#define USB_SET_FIELD32(address, _union, field, value)		\
+	do {							\
+		union _union c;					\
+								\
+		c.u32 = cvmx_usb_read_csr32(usb, address);	\
+		c.s.field = value;				\
+		cvmx_usb_write_csr32(usb, address, c.u32);	\
+	} while (0)
+
+/* Returns the IO address to push/pop stuff data from the FIFOs */
+#define USB_FIFO_ADDRESS(channel, usb_index) \
+	(CVMX_USBCX_GOTGCTL(usb_index) + ((channel) + 1) * 0x1000)
+
+/**
+ * struct octeon_temp_buffer - a bounce buffer for USB transfers
+ * @orig_buffer: the original buffer passed by the USB stack
+ * @data:	 the newly allocated temporary buffer (excluding meta-data)
+ *
+ * Both the DMA engine and FIFO mode will always transfer full 32-bit words. If
+ * the buffer is too short, we need to allocate a temporary one, and this struct
+ * represents it.
+ */
+struct octeon_temp_buffer {
+	void *orig_buffer;
+	u8 data[];
+};
+
+static inline struct usb_hcd *octeon_to_hcd(struct octeon_hcd *p)
+{
+	return container_of((void *)p, struct usb_hcd, hcd_priv);
+}
+
+/**
+ * octeon_alloc_temp_buffer - allocate a temporary buffer for USB transfer
+ *                            (if needed)
+ * @urb:	URB.
+ * @mem_flags:	Memory allocation flags.
+ *
+ * This function allocates a temporary bounce buffer whenever it's needed
+ * due to HW limitations.
+ */
+static int octeon_alloc_temp_buffer(struct urb *urb, gfp_t mem_flags)
+{
+	struct octeon_temp_buffer *temp;
+
+	if (urb->num_sgs || urb->sg ||
+	    (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) ||
+	    !(urb->transfer_buffer_length % sizeof(u32)))
+		return 0;
+
+	temp = kmalloc(ALIGN(urb->transfer_buffer_length, sizeof(u32)) +
+		       sizeof(*temp), mem_flags);
+	if (!temp)
+		return -ENOMEM;
+
+	temp->orig_buffer = urb->transfer_buffer;
+	if (usb_urb_dir_out(urb))
+		memcpy(temp->data, urb->transfer_buffer,
+		       urb->transfer_buffer_length);
+	urb->transfer_buffer = temp->data;
+	urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;
+
+	return 0;
+}
+
+/**
+ * octeon_free_temp_buffer - free a temporary buffer used by USB transfers.
+ * @urb: URB.
+ *
+ * Frees a buffer allocated by octeon_alloc_temp_buffer().
+ */
+static void octeon_free_temp_buffer(struct urb *urb)
+{
+	struct octeon_temp_buffer *temp;
+	size_t length;
+
+	if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
+		return;
+
+	temp = container_of(urb->transfer_buffer, struct octeon_temp_buffer,
+			    data);
+	if (usb_urb_dir_in(urb)) {
+		if (usb_pipeisoc(urb->pipe))
+			length = urb->transfer_buffer_length;
+		else
+			length = urb->actual_length;
+
+		memcpy(temp->orig_buffer, urb->transfer_buffer, length);
+	}
+	urb->transfer_buffer = temp->orig_buffer;
+	urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
+	kfree(temp);
+}
+
+/**
+ * octeon_map_urb_for_dma - Octeon-specific map_urb_for_dma().
+ * @hcd:	USB HCD structure.
+ * @urb:	URB.
+ * @mem_flags:	Memory allocation flags.
+ */
+static int octeon_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+				  gfp_t mem_flags)
+{
+	int ret;
+
+	ret = octeon_alloc_temp_buffer(urb, mem_flags);
+	if (ret)
+		return ret;
+
+	ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+	if (ret)
+		octeon_free_temp_buffer(urb);
+
+	return ret;
+}
+
+/**
+ * octeon_unmap_urb_for_dma - Octeon-specific unmap_urb_for_dma()
+ * @hcd:	USB HCD structure.
+ * @urb:	URB.
+ */
+static void octeon_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	usb_hcd_unmap_urb_for_dma(hcd, urb);
+	octeon_free_temp_buffer(urb);
+}
+
+/**
+ * Read a USB 32bit CSR. It performs the necessary address swizzle
+ * for 32bit CSRs and logs the value in a readable format if
+ * debugging is on.
+ *
+ * @usb:     USB block this access is for
+ * @address: 64bit address to read
+ *
+ * Returns: Result of the read
+ */
+static inline u32 cvmx_usb_read_csr32(struct octeon_hcd *usb, u64 address)
+{
+	return cvmx_read64_uint32(address ^ 4);
+}
+
+/**
+ * Write a USB 32bit CSR. It performs the necessary address
+ * swizzle for 32bit CSRs and logs the value in a readable format
+ * if debugging is on.
+ *
+ * @usb:     USB block this access is for
+ * @address: 64bit address to write
+ * @value:   Value to write
+ */
+static inline void cvmx_usb_write_csr32(struct octeon_hcd *usb,
+					u64 address, u32 value)
+{
+	cvmx_write64_uint32(address ^ 4, value);
+	cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
+}
+
+/**
+ * Return non zero if this pipe connects to a non HIGH speed
+ * device through a high speed hub.
+ *
+ * @usb:    USB block this access is for
+ * @pipe:   Pipe to check
+ *
+ * Returns: Non zero if we need to do split transactions
+ */
+static inline int cvmx_usb_pipe_needs_split(struct octeon_hcd *usb,
+					    struct cvmx_usb_pipe *pipe)
+{
+	return pipe->device_speed != CVMX_USB_SPEED_HIGH &&
+	       usb->usbcx_hprt.s.prtspd == CVMX_USB_SPEED_HIGH;
+}
+
+/**
+ * Trivial utility function to return the correct PID for a pipe
+ *
+ * @pipe:   pipe to check
+ *
+ * Returns: PID for pipe
+ */
+static inline int cvmx_usb_get_data_pid(struct cvmx_usb_pipe *pipe)
+{
+	if (pipe->pid_toggle)
+		return 2; /* Data1 */
+	return 0; /* Data0 */
+}
+
+/* Loops through register until txfflsh or rxfflsh become zero.*/
+static int cvmx_wait_tx_rx(struct octeon_hcd *usb, int fflsh_type)
+{
+	int result;
+	u64 address = CVMX_USBCX_GRSTCTL(usb->index);
+	u64 done = cvmx_get_cycle() + 100 *
+		   (u64)octeon_get_clock_rate / 1000000;
+	union cvmx_usbcx_grstctl c;
+
+	while (1) {
+		c.u32 = cvmx_usb_read_csr32(usb, address);
+		if (fflsh_type == 0 && c.s.txfflsh == 0) {
+			result = 0;
+			break;
+		} else if (fflsh_type == 1 && c.s.rxfflsh == 0) {
+			result = 0;
+			break;
+		} else if (cvmx_get_cycle() > done) {
+			result = -1;
+			break;
+		}
+
+		__delay(100);
+	}
+	return result;
+}
+
+static void cvmx_fifo_setup(struct octeon_hcd *usb)
+{
+	union cvmx_usbcx_ghwcfg3 usbcx_ghwcfg3;
+	union cvmx_usbcx_gnptxfsiz npsiz;
+	union cvmx_usbcx_hptxfsiz psiz;
+
+	usbcx_ghwcfg3.u32 = cvmx_usb_read_csr32(usb,
+						CVMX_USBCX_GHWCFG3(usb->index));
+
+	/*
+	 * Program the USBC_GRXFSIZ register to select the size of the receive
+	 * FIFO (25%).
+	 */
+	USB_SET_FIELD32(CVMX_USBCX_GRXFSIZ(usb->index), cvmx_usbcx_grxfsiz,
+			rxfdep, usbcx_ghwcfg3.s.dfifodepth / 4);
+
+	/*
+	 * Program the USBC_GNPTXFSIZ register to select the size and the start
+	 * address of the non-periodic transmit FIFO for nonperiodic
+	 * transactions (50%).
+	 */
+	npsiz.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index));
+	npsiz.s.nptxfdep = usbcx_ghwcfg3.s.dfifodepth / 2;
+	npsiz.s.nptxfstaddr = usbcx_ghwcfg3.s.dfifodepth / 4;
+	cvmx_usb_write_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index), npsiz.u32);
+
+	/*
+	 * Program the USBC_HPTXFSIZ register to select the size and start
+	 * address of the periodic transmit FIFO for periodic transactions
+	 * (25%).
+	 */
+	psiz.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index));
+	psiz.s.ptxfsize = usbcx_ghwcfg3.s.dfifodepth / 4;
+	psiz.s.ptxfstaddr = 3 * usbcx_ghwcfg3.s.dfifodepth / 4;
+	cvmx_usb_write_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index), psiz.u32);
+
+	/* Flush all FIFOs */
+	USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index),
+			cvmx_usbcx_grstctl, txfnum, 0x10);
+	USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index),
+			cvmx_usbcx_grstctl, txfflsh, 1);
+	cvmx_wait_tx_rx(usb, 0);
+	USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index),
+			cvmx_usbcx_grstctl, rxfflsh, 1);
+	cvmx_wait_tx_rx(usb, 1);
+}
+
+/**
+ * Shutdown a USB port after a call to cvmx_usb_initialize().
+ * The port should be disabled with all pipes closed when this
+ * function is called.
+ *
+ * @usb: USB device state populated by cvmx_usb_initialize().
+ *
+ * Returns: 0 or a negative error code.
+ */
+static int cvmx_usb_shutdown(struct octeon_hcd *usb)
+{
+	union cvmx_usbnx_clk_ctl usbn_clk_ctl;
+
+	/* Make sure all pipes are closed */
+	if (!list_empty(&usb->idle_pipes) ||
+	    !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_ISOCHRONOUS]) ||
+	    !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_INTERRUPT]) ||
+	    !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_CONTROL]) ||
+	    !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_BULK]))
+		return -EBUSY;
+
+	/* Disable the clocks and put them in power on reset */
+	usbn_clk_ctl.u64 = cvmx_read64_uint64(CVMX_USBNX_CLK_CTL(usb->index));
+	usbn_clk_ctl.s.enable = 1;
+	usbn_clk_ctl.s.por = 1;
+	usbn_clk_ctl.s.hclk_rst = 1;
+	usbn_clk_ctl.s.prst = 0;
+	usbn_clk_ctl.s.hrst = 0;
+	cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
+	return 0;
+}
+
+/**
+ * Initialize a USB port for use. This must be called before any
+ * other access to the Octeon USB port is made. The port starts
+ * off in the disabled state.
+ *
+ * @dev:	 Pointer to struct device for logging purposes.
+ * @usb:	 Pointer to struct octeon_hcd.
+ *
+ * Returns: 0 or a negative error code.
+ */
+static int cvmx_usb_initialize(struct device *dev,
+			       struct octeon_hcd *usb)
+{
+	int channel;
+	int divisor;
+	int retries = 0;
+	union cvmx_usbcx_hcfg usbcx_hcfg;
+	union cvmx_usbnx_clk_ctl usbn_clk_ctl;
+	union cvmx_usbcx_gintsts usbc_gintsts;
+	union cvmx_usbcx_gahbcfg usbcx_gahbcfg;
+	union cvmx_usbcx_gintmsk usbcx_gintmsk;
+	union cvmx_usbcx_gusbcfg usbcx_gusbcfg;
+	union cvmx_usbnx_usbp_ctl_status usbn_usbp_ctl_status;
+
+retry:
+	/*
+	 * Power On Reset and PHY Initialization
+	 *
+	 * 1. Wait for DCOK to assert (nothing to do)
+	 *
+	 * 2a. Write USBN0/1_CLK_CTL[POR] = 1 and
+	 *     USBN0/1_CLK_CTL[HRST,PRST,HCLK_RST] = 0
+	 */
+	usbn_clk_ctl.u64 = cvmx_read64_uint64(CVMX_USBNX_CLK_CTL(usb->index));
+	usbn_clk_ctl.s.por = 1;
+	usbn_clk_ctl.s.hrst = 0;
+	usbn_clk_ctl.s.prst = 0;
+	usbn_clk_ctl.s.hclk_rst = 0;
+	usbn_clk_ctl.s.enable = 0;
+	/*
+	 * 2b. Select the USB reference clock/crystal parameters by writing
+	 *     appropriate values to USBN0/1_CLK_CTL[P_C_SEL, P_RTYPE, P_COM_ON]
+	 */
+	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND) {
+		/*
+		 * The USB port uses 12/24/48MHz 2.5V board clock
+		 * source at USB_XO. USB_XI should be tied to GND.
+		 * Most Octeon evaluation boards require this setting
+		 */
+		if (OCTEON_IS_MODEL(OCTEON_CN3XXX) ||
+		    OCTEON_IS_MODEL(OCTEON_CN56XX) ||
+		    OCTEON_IS_MODEL(OCTEON_CN50XX))
+			/* From CN56XX,CN50XX,CN31XX,CN30XX manuals */
+			usbn_clk_ctl.s.p_rtype = 2; /* p_rclk=1 & p_xenbn=0 */
+		else
+			/* From CN52XX manual */
+			usbn_clk_ctl.s.p_rtype = 1;
+
+		switch (usb->init_flags &
+			CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK) {
+		case CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ:
+			usbn_clk_ctl.s.p_c_sel = 0;
+			break;
+		case CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ:
+			usbn_clk_ctl.s.p_c_sel = 1;
+			break;
+		case CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ:
+			usbn_clk_ctl.s.p_c_sel = 2;
+			break;
+		}
+	} else {
+		/*
+		 * The USB port uses a 12MHz crystal as clock source
+		 * at USB_XO and USB_XI
+		 */
+		if (OCTEON_IS_MODEL(OCTEON_CN3XXX))
+			/* From CN31XX,CN30XX manual */
+			usbn_clk_ctl.s.p_rtype = 3; /* p_rclk=1 & p_xenbn=1 */
+		else
+			/* From CN56XX,CN52XX,CN50XX manuals. */
+			usbn_clk_ctl.s.p_rtype = 0;
+
+		usbn_clk_ctl.s.p_c_sel = 0;
+	}
+	/*
+	 * 2c. Select the HCLK via writing USBN0/1_CLK_CTL[DIVIDE, DIVIDE2] and
+	 *     setting USBN0/1_CLK_CTL[ENABLE] = 1. Divide the core clock down
+	 *     such that USB is as close as possible to 125Mhz
+	 */
+	divisor = DIV_ROUND_UP(octeon_get_clock_rate(), 125000000);
+	/* Lower than 4 doesn't seem to work properly */
+	if (divisor < 4)
+		divisor = 4;
+	usbn_clk_ctl.s.divide = divisor;
+	usbn_clk_ctl.s.divide2 = 0;
+	cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
+
+	/* 2d. Write USBN0/1_CLK_CTL[HCLK_RST] = 1 */
+	usbn_clk_ctl.s.hclk_rst = 1;
+	cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
+	/* 2e.  Wait 64 core-clock cycles for HCLK to stabilize */
+	__delay(64);
+	/*
+	 * 3. Program the power-on reset field in the USBN clock-control
+	 *    register:
+	 *    USBN_CLK_CTL[POR] = 0
+	 */
+	usbn_clk_ctl.s.por = 0;
+	cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
+	/* 4. Wait 1 ms for PHY clock to start */
+	mdelay(1);
+	/*
+	 * 5. Program the Reset input from automatic test equipment field in the
+	 *    USBP control and status register:
+	 *    USBN_USBP_CTL_STATUS[ATE_RESET] = 1
+	 */
+	usbn_usbp_ctl_status.u64 =
+		cvmx_read64_uint64(CVMX_USBNX_USBP_CTL_STATUS(usb->index));
+	usbn_usbp_ctl_status.s.ate_reset = 1;
+	cvmx_write64_uint64(CVMX_USBNX_USBP_CTL_STATUS(usb->index),
+			    usbn_usbp_ctl_status.u64);
+	/* 6. Wait 10 cycles */
+	__delay(10);
+	/*
+	 * 7. Clear ATE_RESET field in the USBN clock-control register:
+	 *    USBN_USBP_CTL_STATUS[ATE_RESET] = 0
+	 */
+	usbn_usbp_ctl_status.s.ate_reset = 0;
+	cvmx_write64_uint64(CVMX_USBNX_USBP_CTL_STATUS(usb->index),
+			    usbn_usbp_ctl_status.u64);
+	/*
+	 * 8. Program the PHY reset field in the USBN clock-control register:
+	 *    USBN_CLK_CTL[PRST] = 1
+	 */
+	usbn_clk_ctl.s.prst = 1;
+	cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
+	/*
+	 * 9. Program the USBP control and status register to select host or
+	 *    device mode. USBN_USBP_CTL_STATUS[HST_MODE] = 0 for host, = 1 for
+	 *    device
+	 */
+	usbn_usbp_ctl_status.s.hst_mode = 0;
+	cvmx_write64_uint64(CVMX_USBNX_USBP_CTL_STATUS(usb->index),
+			    usbn_usbp_ctl_status.u64);
+	/* 10. Wait 1 us */
+	udelay(1);
+	/*
+	 * 11. Program the hreset_n field in the USBN clock-control register:
+	 *     USBN_CLK_CTL[HRST] = 1
+	 */
+	usbn_clk_ctl.s.hrst = 1;
+	cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
+	/* 12. Proceed to USB core initialization */
+	usbn_clk_ctl.s.enable = 1;
+	cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
+	udelay(1);
+
+	/*
+	 * USB Core Initialization
+	 *
+	 * 1. Read USBC_GHWCFG1, USBC_GHWCFG2, USBC_GHWCFG3, USBC_GHWCFG4 to
+	 *    determine USB core configuration parameters.
+	 *
+	 *    Nothing needed
+	 *
+	 * 2. Program the following fields in the global AHB configuration
+	 *    register (USBC_GAHBCFG)
+	 *    DMA mode, USBC_GAHBCFG[DMAEn]: 1 = DMA mode, 0 = slave mode
+	 *    Burst length, USBC_GAHBCFG[HBSTLEN] = 0
+	 *    Nonperiodic TxFIFO empty level (slave mode only),
+	 *    USBC_GAHBCFG[NPTXFEMPLVL]
+	 *    Periodic TxFIFO empty level (slave mode only),
+	 *    USBC_GAHBCFG[PTXFEMPLVL]
+	 *    Global interrupt mask, USBC_GAHBCFG[GLBLINTRMSK] = 1
+	 */
+	usbcx_gahbcfg.u32 = 0;
+	usbcx_gahbcfg.s.dmaen = !(usb->init_flags &
+				  CVMX_USB_INITIALIZE_FLAGS_NO_DMA);
+	usbcx_gahbcfg.s.hbstlen = 0;
+	usbcx_gahbcfg.s.nptxfemplvl = 1;
+	usbcx_gahbcfg.s.ptxfemplvl = 1;
+	usbcx_gahbcfg.s.glblintrmsk = 1;
+	cvmx_usb_write_csr32(usb, CVMX_USBCX_GAHBCFG(usb->index),
+			     usbcx_gahbcfg.u32);
+
+	/*
+	 * 3. Program the following fields in USBC_GUSBCFG register.
+	 *    HS/FS timeout calibration, USBC_GUSBCFG[TOUTCAL] = 0
+	 *    ULPI DDR select, USBC_GUSBCFG[DDRSEL] = 0
+	 *    USB turnaround time, USBC_GUSBCFG[USBTRDTIM] = 0x5
+	 *    PHY low-power clock select, USBC_GUSBCFG[PHYLPWRCLKSEL] = 0
+	 */
+	usbcx_gusbcfg.u32 = cvmx_usb_read_csr32(usb,
+						CVMX_USBCX_GUSBCFG(usb->index));
+	usbcx_gusbcfg.s.toutcal = 0;
+	usbcx_gusbcfg.s.ddrsel = 0;
+	usbcx_gusbcfg.s.usbtrdtim = 0x5;
+	usbcx_gusbcfg.s.phylpwrclksel = 0;
+	cvmx_usb_write_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index),
+			     usbcx_gusbcfg.u32);
+
+	/*
+	 * 4. The software must unmask the following bits in the USBC_GINTMSK
+	 *    register.
+	 *    OTG interrupt mask, USBC_GINTMSK[OTGINTMSK] = 1
+	 *    Mode mismatch interrupt mask, USBC_GINTMSK[MODEMISMSK] = 1
+	 */
+	usbcx_gintmsk.u32 = cvmx_usb_read_csr32(usb,
+						CVMX_USBCX_GINTMSK(usb->index));
+	usbcx_gintmsk.s.otgintmsk = 1;
+	usbcx_gintmsk.s.modemismsk = 1;
+	usbcx_gintmsk.s.hchintmsk = 1;
+	usbcx_gintmsk.s.sofmsk = 0;
+	/* We need RX FIFO interrupts if we don't have DMA */
+	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+		usbcx_gintmsk.s.rxflvlmsk = 1;
+	cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTMSK(usb->index),
+			     usbcx_gintmsk.u32);
+
+	/*
+	 * Disable all channel interrupts. We'll enable them per channel later.
+	 */
+	for (channel = 0; channel < 8; channel++)
+		cvmx_usb_write_csr32(usb,
+				     CVMX_USBCX_HCINTMSKX(channel, usb->index),
+				     0);
+
+	/*
+	 * Host Port Initialization
+	 *
+	 * 1. Program the host-port interrupt-mask field to unmask,
+	 *    USBC_GINTMSK[PRTINT] = 1
+	 */
+	USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index),
+			cvmx_usbcx_gintmsk, prtintmsk, 1);
+	USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index),
+			cvmx_usbcx_gintmsk, disconnintmsk, 1);
+
+	/*
+	 * 2. Program the USBC_HCFG register to select full-speed host
+	 *    or high-speed host.
+	 */
+	usbcx_hcfg.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_HCFG(usb->index));
+	usbcx_hcfg.s.fslssupp = 0;
+	usbcx_hcfg.s.fslspclksel = 0;
+	cvmx_usb_write_csr32(usb, CVMX_USBCX_HCFG(usb->index), usbcx_hcfg.u32);
+
+	cvmx_fifo_setup(usb);
+
+	/*
+	 * If the controller is getting port events right after the reset, it
+	 * means the initialization failed. Try resetting the controller again
+	 * in such case. This is seen to happen after cold boot on DSR-1000N.
+	 */
+	usbc_gintsts.u32 = cvmx_usb_read_csr32(usb,
+					       CVMX_USBCX_GINTSTS(usb->index));
+	cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTSTS(usb->index),
+			     usbc_gintsts.u32);
+	dev_dbg(dev, "gintsts after reset: 0x%x\n", (int)usbc_gintsts.u32);
+	if (!usbc_gintsts.s.disconnint && !usbc_gintsts.s.prtint)
+		return 0;
+	if (retries++ >= 5)
+		return -EAGAIN;
+	dev_info(dev, "controller reset failed (gintsts=0x%x) - retrying\n",
+		 (int)usbc_gintsts.u32);
+	msleep(50);
+	cvmx_usb_shutdown(usb);
+	msleep(50);
+	goto retry;
+}
+
+/**
+ * Reset a USB port. After this call succeeds, the USB port is
+ * online and servicing requests.
+ *
+ * @usb: USB device state populated by cvmx_usb_initialize().
+ */
+static void cvmx_usb_reset_port(struct octeon_hcd *usb)
+{
+	usb->usbcx_hprt.u32 = cvmx_usb_read_csr32(usb,
+						  CVMX_USBCX_HPRT(usb->index));
+
+	/* Program the port reset bit to start the reset process */
+	USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt,
+			prtrst, 1);
+
+	/*
+	 * Wait at least 50ms (high speed), or 10ms (full speed) for the reset
+	 * process to complete.
+	 */
+	mdelay(50);
+
+	/* Program the port reset bit to 0, USBC_HPRT[PRTRST] = 0 */
+	USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt,
+			prtrst, 0);
+
+	/*
+	 * Read the port speed field to get the enumerated speed,
+	 * USBC_HPRT[PRTSPD].
+	 */
+	usb->usbcx_hprt.u32 = cvmx_usb_read_csr32(usb,
+						  CVMX_USBCX_HPRT(usb->index));
+}
+
+/**
+ * Disable a USB port. After this call the USB port will not
+ * generate data transfers and will not generate events.
+ * Transactions in process will fail and call their
+ * associated callbacks.
+ *
+ * @usb: USB device state populated by cvmx_usb_initialize().
+ *
+ * Returns: 0 or a negative error code.
+ */
+static int cvmx_usb_disable(struct octeon_hcd *usb)
+{
+	/* Disable the port */
+	USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt,
+			prtena, 1);
+	return 0;
+}
+
+/**
+ * Get the current state of the USB port. Use this call to
+ * determine if the usb port has anything connected, is enabled,
+ * or has some sort of error condition. The return value of this
+ * call has "changed" bits to signal of the value of some fields
+ * have changed between calls.
+ *
+ * @usb: USB device state populated by cvmx_usb_initialize().
+ *
+ * Returns: Port status information
+ */
+static struct cvmx_usb_port_status cvmx_usb_get_status(struct octeon_hcd *usb)
+{
+	union cvmx_usbcx_hprt usbc_hprt;
+	struct cvmx_usb_port_status result;
+
+	memset(&result, 0, sizeof(result));
+
+	usbc_hprt.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
+	result.port_enabled = usbc_hprt.s.prtena;
+	result.port_over_current = usbc_hprt.s.prtovrcurract;
+	result.port_powered = usbc_hprt.s.prtpwr;
+	result.port_speed = usbc_hprt.s.prtspd;
+	result.connected = usbc_hprt.s.prtconnsts;
+	result.connect_change =
+		result.connected != usb->port_status.connected;
+
+	return result;
+}
+
+/**
+ * Open a virtual pipe between the host and a USB device. A pipe
+ * must be opened before data can be transferred between a device
+ * and Octeon.
+ *
+ * @usb:	     USB device state populated by cvmx_usb_initialize().
+ * @device_addr:
+ *		     USB device address to open the pipe to
+ *		     (0-127).
+ * @endpoint_num:
+ *		     USB endpoint number to open the pipe to
+ *		     (0-15).
+ * @device_speed:
+ *		     The speed of the device the pipe is going
+ *		     to. This must match the device's speed,
+ *		     which may be different than the port speed.
+ * @max_packet:	     The maximum packet length the device can
+ *		     transmit/receive (low speed=0-8, full
+ *		     speed=0-1023, high speed=0-1024). This value
+ *		     comes from the standard endpoint descriptor
+ *		     field wMaxPacketSize bits <10:0>.
+ * @transfer_type:
+ *		     The type of transfer this pipe is for.
+ * @transfer_dir:
+ *		     The direction the pipe is in. This is not
+ *		     used for control pipes.
+ * @interval:	     For ISOCHRONOUS and INTERRUPT transfers,
+ *		     this is how often the transfer is scheduled
+ *		     for. All other transfers should specify
+ *		     zero. The units are in frames (8000/sec at
+ *		     high speed, 1000/sec for full speed).
+ * @multi_count:
+ *		     For high speed devices, this is the maximum
+ *		     allowed number of packet per microframe.
+ *		     Specify zero for non high speed devices. This
+ *		     value comes from the standard endpoint descriptor
+ *		     field wMaxPacketSize bits <12:11>.
+ * @hub_device_addr:
+ *		     Hub device address this device is connected
+ *		     to. Devices connected directly to Octeon
+ *		     use zero. This is only used when the device
+ *		     is full/low speed behind a high speed hub.
+ *		     The address will be of the high speed hub,
+ *		     not and full speed hubs after it.
+ * @hub_port:	     Which port on the hub the device is
+ *		     connected. Use zero for devices connected
+ *		     directly to Octeon. Like hub_device_addr,
+ *		     this is only used for full/low speed
+ *		     devices behind a high speed hub.
+ *
+ * Returns: A non-NULL value is a pipe. NULL means an error.
+ */
+static struct cvmx_usb_pipe *cvmx_usb_open_pipe(struct octeon_hcd *usb,
+						int device_addr,
+						int endpoint_num,
+						enum cvmx_usb_speed
+							device_speed,
+						int max_packet,
+						enum cvmx_usb_transfer
+							transfer_type,
+						enum cvmx_usb_direction
+							transfer_dir,
+						int interval, int multi_count,
+						int hub_device_addr,
+						int hub_port)
+{
+	struct cvmx_usb_pipe *pipe;
+
+	pipe = kzalloc(sizeof(*pipe), GFP_ATOMIC);
+	if (!pipe)
+		return NULL;
+	if ((device_speed == CVMX_USB_SPEED_HIGH) &&
+	    (transfer_dir == CVMX_USB_DIRECTION_OUT) &&
+	    (transfer_type == CVMX_USB_TRANSFER_BULK))
+		pipe->flags |= CVMX_USB_PIPE_FLAGS_NEED_PING;
+	pipe->device_addr = device_addr;
+	pipe->endpoint_num = endpoint_num;
+	pipe->device_speed = device_speed;
+	pipe->max_packet = max_packet;
+	pipe->transfer_type = transfer_type;
+	pipe->transfer_dir = transfer_dir;
+	INIT_LIST_HEAD(&pipe->transactions);
+
+	/*
+	 * All pipes use interval to rate limit NAK processing. Force an
+	 * interval if one wasn't supplied
+	 */
+	if (!interval)
+		interval = 1;
+	if (cvmx_usb_pipe_needs_split(usb, pipe)) {
+		pipe->interval = interval * 8;
+		/* Force start splits to be schedule on uFrame 0 */
+		pipe->next_tx_frame = ((usb->frame_number + 7) & ~7) +
+					pipe->interval;
+	} else {
+		pipe->interval = interval;
+		pipe->next_tx_frame = usb->frame_number + pipe->interval;
+	}
+	pipe->multi_count = multi_count;
+	pipe->hub_device_addr = hub_device_addr;
+	pipe->hub_port = hub_port;
+	pipe->pid_toggle = 0;
+	pipe->split_sc_frame = -1;
+	list_add_tail(&pipe->node, &usb->idle_pipes);
+
+	/*
+	 * We don't need to tell the hardware about this pipe yet since
+	 * it doesn't have any submitted requests
+	 */
+
+	return pipe;
+}
+
+/**
+ * Poll the RX FIFOs and remove data as needed. This function is only used
+ * in non DMA mode. It is very important that this function be called quickly
+ * enough to prevent FIFO overflow.
+ *
+ * @usb:	USB device state populated by cvmx_usb_initialize().
+ */
+static void cvmx_usb_poll_rx_fifo(struct octeon_hcd *usb)
+{
+	union cvmx_usbcx_grxstsph rx_status;
+	int channel;
+	int bytes;
+	u64 address;
+	u32 *ptr;
+
+	rx_status.u32 = cvmx_usb_read_csr32(usb,
+					    CVMX_USBCX_GRXSTSPH(usb->index));
+	/* Only read data if IN data is there */
+	if (rx_status.s.pktsts != 2)
+		return;
+	/* Check if no data is available */
+	if (!rx_status.s.bcnt)
+		return;
+
+	channel = rx_status.s.chnum;
+	bytes = rx_status.s.bcnt;
+	if (!bytes)
+		return;
+
+	/* Get where the DMA engine would have written this data */
+	address = cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index) +
+				     channel * 8);
+
+	ptr = cvmx_phys_to_ptr(address);
+	cvmx_write64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel * 8,
+			    address + bytes);
+
+	/* Loop writing the FIFO data for this packet into memory */
+	while (bytes > 0) {
+		*ptr++ = cvmx_usb_read_csr32(usb,
+					USB_FIFO_ADDRESS(channel, usb->index));
+		bytes -= 4;
+	}
+	CVMX_SYNCW;
+}
+
+/**
+ * Fill the TX hardware fifo with data out of the software
+ * fifos
+ *
+ * @usb:	    USB device state populated by cvmx_usb_initialize().
+ * @fifo:	    Software fifo to use
+ * @available:	    Amount of space in the hardware fifo
+ *
+ * Returns: Non zero if the hardware fifo was too small and needs
+ *	    to be serviced again.
+ */
+static int cvmx_usb_fill_tx_hw(struct octeon_hcd *usb,
+			       struct cvmx_usb_tx_fifo *fifo, int available)
+{
+	/*
+	 * We're done either when there isn't anymore space or the software FIFO
+	 * is empty
+	 */
+	while (available && (fifo->head != fifo->tail)) {
+		int i = fifo->tail;
+		const u32 *ptr = cvmx_phys_to_ptr(fifo->entry[i].address);
+		u64 csr_address = USB_FIFO_ADDRESS(fifo->entry[i].channel,
+						   usb->index) ^ 4;
+		int words = available;
+
+		/* Limit the amount of data to what the SW fifo has */
+		if (fifo->entry[i].size <= available) {
+			words = fifo->entry[i].size;
+			fifo->tail++;
+			if (fifo->tail > MAX_CHANNELS)
+				fifo->tail = 0;
+		}
+
+		/* Update the next locations and counts */
+		available -= words;
+		fifo->entry[i].address += words * 4;
+		fifo->entry[i].size -= words;
+
+		/*
+		 * Write the HW fifo data. The read every three writes is due
+		 * to an errata on CN3XXX chips
+		 */
+		while (words > 3) {
+			cvmx_write64_uint32(csr_address, *ptr++);
+			cvmx_write64_uint32(csr_address, *ptr++);
+			cvmx_write64_uint32(csr_address, *ptr++);
+			cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
+			words -= 3;
+		}
+		cvmx_write64_uint32(csr_address, *ptr++);
+		if (--words) {
+			cvmx_write64_uint32(csr_address, *ptr++);
+			if (--words)
+				cvmx_write64_uint32(csr_address, *ptr++);
+		}
+		cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
+	}
+	return fifo->head != fifo->tail;
+}
+
+/**
+ * Check the hardware FIFOs and fill them as needed
+ *
+ * @usb:	USB device state populated by cvmx_usb_initialize().
+ */
+static void cvmx_usb_poll_tx_fifo(struct octeon_hcd *usb)
+{
+	if (usb->periodic.head != usb->periodic.tail) {
+		union cvmx_usbcx_hptxsts tx_status;
+
+		tx_status.u32 = cvmx_usb_read_csr32(usb,
+						    CVMX_USBCX_HPTXSTS(usb->index));
+		if (cvmx_usb_fill_tx_hw(usb, &usb->periodic,
+					tx_status.s.ptxfspcavail))
+			USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index),
+					cvmx_usbcx_gintmsk, ptxfempmsk, 1);
+		else
+			USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index),
+					cvmx_usbcx_gintmsk, ptxfempmsk, 0);
+	}
+
+	if (usb->nonperiodic.head != usb->nonperiodic.tail) {
+		union cvmx_usbcx_gnptxsts tx_status;
+
+		tx_status.u32 = cvmx_usb_read_csr32(usb,
+						    CVMX_USBCX_GNPTXSTS(usb->index));
+		if (cvmx_usb_fill_tx_hw(usb, &usb->nonperiodic,
+					tx_status.s.nptxfspcavail))
+			USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index),
+					cvmx_usbcx_gintmsk, nptxfempmsk, 1);
+		else
+			USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index),
+					cvmx_usbcx_gintmsk, nptxfempmsk, 0);
+	}
+}
+
+/**
+ * Fill the TX FIFO with an outgoing packet
+ *
+ * @usb:	  USB device state populated by cvmx_usb_initialize().
+ * @channel:	  Channel number to get packet from
+ */
+static void cvmx_usb_fill_tx_fifo(struct octeon_hcd *usb, int channel)
+{
+	union cvmx_usbcx_hccharx hcchar;
+	union cvmx_usbcx_hcspltx usbc_hcsplt;
+	union cvmx_usbcx_hctsizx usbc_hctsiz;
+	struct cvmx_usb_tx_fifo *fifo;
+
+	/* We only need to fill data on outbound channels */
+	hcchar.u32 = cvmx_usb_read_csr32(usb,
+					 CVMX_USBCX_HCCHARX(channel, usb->index));
+	if (hcchar.s.epdir != CVMX_USB_DIRECTION_OUT)
+		return;
+
+	/* OUT Splits only have data on the start and not the complete */
+	usbc_hcsplt.u32 = cvmx_usb_read_csr32(usb,
+					      CVMX_USBCX_HCSPLTX(channel, usb->index));
+	if (usbc_hcsplt.s.spltena && usbc_hcsplt.s.compsplt)
+		return;
+
+	/*
+	 * Find out how many bytes we need to fill and convert it into 32bit
+	 * words.
+	 */
+	usbc_hctsiz.u32 = cvmx_usb_read_csr32(usb,
+					      CVMX_USBCX_HCTSIZX(channel, usb->index));
+	if (!usbc_hctsiz.s.xfersize)
+		return;
+
+	if ((hcchar.s.eptype == CVMX_USB_TRANSFER_INTERRUPT) ||
+	    (hcchar.s.eptype == CVMX_USB_TRANSFER_ISOCHRONOUS))
+		fifo = &usb->periodic;
+	else
+		fifo = &usb->nonperiodic;
+
+	fifo->entry[fifo->head].channel = channel;
+	fifo->entry[fifo->head].address =
+		cvmx_read64_uint64(CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) +
+				   channel * 8);
+	fifo->entry[fifo->head].size = (usbc_hctsiz.s.xfersize + 3) >> 2;
+	fifo->head++;
+	if (fifo->head > MAX_CHANNELS)
+		fifo->head = 0;
+
+	cvmx_usb_poll_tx_fifo(usb);
+}
+
+/**
+ * Perform channel specific setup for Control transactions. All
+ * the generic stuff will already have been done in cvmx_usb_start_channel().
+ *
+ * @usb:	  USB device state populated by cvmx_usb_initialize().
+ * @channel:	  Channel to setup
+ * @pipe:	  Pipe for control transaction
+ */
+static void cvmx_usb_start_channel_control(struct octeon_hcd *usb,
+					   int channel,
+					   struct cvmx_usb_pipe *pipe)
+{
+	struct usb_hcd *hcd = octeon_to_hcd(usb);
+	struct device *dev = hcd->self.controller;
+	struct cvmx_usb_transaction *transaction =
+		list_first_entry(&pipe->transactions, typeof(*transaction),
+				 node);
+	struct usb_ctrlrequest *header =
+		cvmx_phys_to_ptr(transaction->control_header);
+	int bytes_to_transfer = transaction->buffer_length -
+		transaction->actual_bytes;
+	int packets_to_transfer;
+	union cvmx_usbcx_hctsizx usbc_hctsiz;
+
+	usbc_hctsiz.u32 = cvmx_usb_read_csr32(usb,
+					      CVMX_USBCX_HCTSIZX(channel, usb->index));
+
+	switch (transaction->stage) {
+	case CVMX_USB_STAGE_NON_CONTROL:
+	case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE:
+		dev_err(dev, "%s: ERROR - Non control stage\n", __func__);
+		break;
+	case CVMX_USB_STAGE_SETUP:
+		usbc_hctsiz.s.pid = 3; /* Setup */
+		bytes_to_transfer = sizeof(*header);
+		/* All Control operations start with a setup going OUT */
+		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
+				cvmx_usbcx_hccharx, epdir,
+				CVMX_USB_DIRECTION_OUT);
+		/*
+		 * Setup send the control header instead of the buffer data. The
+		 * buffer data will be used in the next stage
+		 */
+		cvmx_write64_uint64(CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) +
+					channel * 8,
+				    transaction->control_header);
+		break;
+	case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE:
+		usbc_hctsiz.s.pid = 3; /* Setup */
+		bytes_to_transfer = 0;
+		/* All Control operations start with a setup going OUT */
+		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
+				cvmx_usbcx_hccharx, epdir,
+				CVMX_USB_DIRECTION_OUT);
+
+		USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index),
+				cvmx_usbcx_hcspltx, compsplt, 1);
+		break;
+	case CVMX_USB_STAGE_DATA:
+		usbc_hctsiz.s.pid = cvmx_usb_get_data_pid(pipe);
+		if (cvmx_usb_pipe_needs_split(usb, pipe)) {
+			if (header->bRequestType & USB_DIR_IN)
+				bytes_to_transfer = 0;
+			else if (bytes_to_transfer > pipe->max_packet)
+				bytes_to_transfer = pipe->max_packet;
+		}
+		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
+				cvmx_usbcx_hccharx, epdir,
+				((header->bRequestType & USB_DIR_IN) ?
+					CVMX_USB_DIRECTION_IN :
+					CVMX_USB_DIRECTION_OUT));
+		break;
+	case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE:
+		usbc_hctsiz.s.pid = cvmx_usb_get_data_pid(pipe);
+		if (!(header->bRequestType & USB_DIR_IN))
+			bytes_to_transfer = 0;
+		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
+				cvmx_usbcx_hccharx, epdir,
+				((header->bRequestType & USB_DIR_IN) ?
+					CVMX_USB_DIRECTION_IN :
+					CVMX_USB_DIRECTION_OUT));
+		USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index),
+				cvmx_usbcx_hcspltx, compsplt, 1);
+		break;
+	case CVMX_USB_STAGE_STATUS:
+		usbc_hctsiz.s.pid = cvmx_usb_get_data_pid(pipe);
+		bytes_to_transfer = 0;
+		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
+				cvmx_usbcx_hccharx, epdir,
+				((header->bRequestType & USB_DIR_IN) ?
+					CVMX_USB_DIRECTION_OUT :
+					CVMX_USB_DIRECTION_IN));
+		break;
+	case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE:
+		usbc_hctsiz.s.pid = cvmx_usb_get_data_pid(pipe);
+		bytes_to_transfer = 0;
+		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
+				cvmx_usbcx_hccharx, epdir,
+				((header->bRequestType & USB_DIR_IN) ?
+					CVMX_USB_DIRECTION_OUT :
+					CVMX_USB_DIRECTION_IN));
+		USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index),
+				cvmx_usbcx_hcspltx, compsplt, 1);
+		break;
+	}
+
+	/*
+	 * Make sure the transfer never exceeds the byte limit of the hardware.
+	 * Further bytes will be sent as continued transactions
+	 */
+	if (bytes_to_transfer > MAX_TRANSFER_BYTES) {
+		/* Round MAX_TRANSFER_BYTES to a multiple of out packet size */
+		bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet;
+		bytes_to_transfer *= pipe->max_packet;
+	}
+
+	/*
+	 * Calculate the number of packets to transfer. If the length is zero
+	 * we still need to transfer one packet
+	 */
+	packets_to_transfer = DIV_ROUND_UP(bytes_to_transfer,
+					   pipe->max_packet);
+	if (packets_to_transfer == 0) {
+		packets_to_transfer = 1;
+	} else if ((packets_to_transfer > 1) &&
+			(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) {
+		/*
+		 * Limit to one packet when not using DMA. Channels must be
+		 * restarted between every packet for IN transactions, so there
+		 * is no reason to do multiple packets in a row
+		 */
+		packets_to_transfer = 1;
+		bytes_to_transfer = packets_to_transfer * pipe->max_packet;
+	} else if (packets_to_transfer > MAX_TRANSFER_PACKETS) {
+		/*
+		 * Limit the number of packet and data transferred to what the
+		 * hardware can handle
+		 */
+		packets_to_transfer = MAX_TRANSFER_PACKETS;
+		bytes_to_transfer = packets_to_transfer * pipe->max_packet;
+	}
+
+	usbc_hctsiz.s.xfersize = bytes_to_transfer;
+	usbc_hctsiz.s.pktcnt = packets_to_transfer;
+
+	cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index),
+			     usbc_hctsiz.u32);
+}
+
+/**
+ * Start a channel to perform the pipe's head transaction
+ *
+ * @usb:	  USB device state populated by cvmx_usb_initialize().
+ * @channel:	  Channel to setup
+ * @pipe:	  Pipe to start
+ */
+static void cvmx_usb_start_channel(struct octeon_hcd *usb, int channel,
+				   struct cvmx_usb_pipe *pipe)
+{
+	struct cvmx_usb_transaction *transaction =
+		list_first_entry(&pipe->transactions, typeof(*transaction),
+				 node);
+
+	/* Make sure all writes to the DMA region get flushed */
+	CVMX_SYNCW;
+
+	/* Attach the channel to the pipe */
+	usb->pipe_for_channel[channel] = pipe;
+	pipe->channel = channel;
+	pipe->flags |= CVMX_USB_PIPE_FLAGS_SCHEDULED;
+
+	/* Mark this channel as in use */
+	usb->idle_hardware_channels &= ~(1 << channel);
+
+	/* Enable the channel interrupt bits */
+	{
+		union cvmx_usbcx_hcintx usbc_hcint;
+		union cvmx_usbcx_hcintmskx usbc_hcintmsk;
+		union cvmx_usbcx_haintmsk usbc_haintmsk;
+
+		/* Clear all channel status bits */
+		usbc_hcint.u32 = cvmx_usb_read_csr32(usb,
+						     CVMX_USBCX_HCINTX(channel, usb->index));
+
+		cvmx_usb_write_csr32(usb,
+				     CVMX_USBCX_HCINTX(channel, usb->index),
+				     usbc_hcint.u32);
+
+		usbc_hcintmsk.u32 = 0;
+		usbc_hcintmsk.s.chhltdmsk = 1;
+		if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
+			/*
+			 * Channels need these extra interrupts when we aren't
+			 * in DMA mode.
+			 */
+			usbc_hcintmsk.s.datatglerrmsk = 1;
+			usbc_hcintmsk.s.frmovrunmsk = 1;
+			usbc_hcintmsk.s.bblerrmsk = 1;
+			usbc_hcintmsk.s.xacterrmsk = 1;
+			if (cvmx_usb_pipe_needs_split(usb, pipe)) {
+				/*
+				 * Splits don't generate xfercompl, so we need
+				 * ACK and NYET.
+				 */
+				usbc_hcintmsk.s.nyetmsk = 1;
+				usbc_hcintmsk.s.ackmsk = 1;
+			}
+			usbc_hcintmsk.s.nakmsk = 1;
+			usbc_hcintmsk.s.stallmsk = 1;
+			usbc_hcintmsk.s.xfercomplmsk = 1;
+		}
+		cvmx_usb_write_csr32(usb,
+				     CVMX_USBCX_HCINTMSKX(channel, usb->index),
+				     usbc_hcintmsk.u32);
+
+		/* Enable the channel interrupt to propagate */
+		usbc_haintmsk.u32 = cvmx_usb_read_csr32(usb,
+							CVMX_USBCX_HAINTMSK(usb->index));
+		usbc_haintmsk.s.haintmsk |= 1 << channel;
+		cvmx_usb_write_csr32(usb, CVMX_USBCX_HAINTMSK(usb->index),
+				     usbc_haintmsk.u32);
+	}
+
+	/* Setup the location the DMA engine uses. */
+	{
+		u64 reg;
+		u64 dma_address = transaction->buffer +
+				  transaction->actual_bytes;
+
+		if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
+			dma_address = transaction->buffer +
+					transaction->iso_packets[0].offset +
+					transaction->actual_bytes;
+
+		if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT)
+			reg = CVMX_USBNX_DMA0_OUTB_CHN0(usb->index);
+		else
+			reg = CVMX_USBNX_DMA0_INB_CHN0(usb->index);
+		cvmx_write64_uint64(reg + channel * 8, dma_address);
+	}
+
+	/* Setup both the size of the transfer and the SPLIT characteristics */
+	{
+		union cvmx_usbcx_hcspltx usbc_hcsplt = {.u32 = 0};
+		union cvmx_usbcx_hctsizx usbc_hctsiz = {.u32 = 0};
+		int packets_to_transfer;
+		int bytes_to_transfer = transaction->buffer_length -
+			transaction->actual_bytes;
+
+		/*
+		 * ISOCHRONOUS transactions store each individual transfer size
+		 * in the packet structure, not the global buffer_length
+		 */
+		if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
+			bytes_to_transfer =
+				transaction->iso_packets[0].length -
+				transaction->actual_bytes;
+
+		/*
+		 * We need to do split transactions when we are talking to non
+		 * high speed devices that are behind a high speed hub
+		 */
+		if (cvmx_usb_pipe_needs_split(usb, pipe)) {
+			/*
+			 * On the start split phase (stage is even) record the
+			 * frame number we will need to send the split complete.
+			 * We only store the lower two bits since the time ahead
+			 * can only be two frames
+			 */
+			if ((transaction->stage & 1) == 0) {
+				if (transaction->type == CVMX_USB_TRANSFER_BULK)
+					pipe->split_sc_frame =
+						(usb->frame_number + 1) & 0x7f;
+				else
+					pipe->split_sc_frame =
+						(usb->frame_number + 2) & 0x7f;
+			} else {
+				pipe->split_sc_frame = -1;
+			}
+
+			usbc_hcsplt.s.spltena = 1;
+			usbc_hcsplt.s.hubaddr = pipe->hub_device_addr;
+			usbc_hcsplt.s.prtaddr = pipe->hub_port;
+			usbc_hcsplt.s.compsplt = (transaction->stage ==
+				CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE);
+
+			/*
+			 * SPLIT transactions can only ever transmit one data
+			 * packet so limit the transfer size to the max packet
+			 * size
+			 */
+			if (bytes_to_transfer > pipe->max_packet)
+				bytes_to_transfer = pipe->max_packet;
+
+			/*
+			 * ISOCHRONOUS OUT splits are unique in that they limit
+			 * data transfers to 188 byte chunks representing the
+			 * begin/middle/end of the data or all
+			 */
+			if (!usbc_hcsplt.s.compsplt &&
+			    (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) &&
+			    (pipe->transfer_type ==
+			     CVMX_USB_TRANSFER_ISOCHRONOUS)) {
+				/*
+				 * Clear the split complete frame number as
+				 * there isn't going to be a split complete
+				 */
+				pipe->split_sc_frame = -1;
+				/*
+				 * See if we've started this transfer and sent
+				 * data
+				 */
+				if (transaction->actual_bytes == 0) {
+					/*
+					 * Nothing sent yet, this is either a
+					 * begin or the entire payload
+					 */
+					if (bytes_to_transfer <= 188)
+						/* Entire payload in one go */
+						usbc_hcsplt.s.xactpos = 3;
+					else
+						/* First part of payload */
+						usbc_hcsplt.s.xactpos = 2;
+				} else {
+					/*
+					 * Continuing the previous data, we must
+					 * either be in the middle or at the end
+					 */
+					if (bytes_to_transfer <= 188)
+						/* End of payload */
+						usbc_hcsplt.s.xactpos = 1;
+					else
+						/* Middle of payload */
+						usbc_hcsplt.s.xactpos = 0;
+				}
+				/*
+				 * Again, the transfer size is limited to 188
+				 * bytes
+				 */
+				if (bytes_to_transfer > 188)
+					bytes_to_transfer = 188;
+			}
+		}
+
+		/*
+		 * Make sure the transfer never exceeds the byte limit of the
+		 * hardware. Further bytes will be sent as continued
+		 * transactions
+		 */
+		if (bytes_to_transfer > MAX_TRANSFER_BYTES) {
+			/*
+			 * Round MAX_TRANSFER_BYTES to a multiple of out packet
+			 * size
+			 */
+			bytes_to_transfer = MAX_TRANSFER_BYTES /
+				pipe->max_packet;
+			bytes_to_transfer *= pipe->max_packet;
+		}
+
+		/*
+		 * Calculate the number of packets to transfer. If the length is
+		 * zero we still need to transfer one packet
+		 */
+		packets_to_transfer =
+			DIV_ROUND_UP(bytes_to_transfer, pipe->max_packet);
+		if (packets_to_transfer == 0) {
+			packets_to_transfer = 1;
+		} else if ((packets_to_transfer > 1) &&
+			   (usb->init_flags &
+			    CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) {
+			/*
+			 * Limit to one packet when not using DMA. Channels must
+			 * be restarted between every packet for IN
+			 * transactions, so there is no reason to do multiple
+			 * packets in a row
+			 */
+			packets_to_transfer = 1;
+			bytes_to_transfer = packets_to_transfer *
+				pipe->max_packet;
+		} else if (packets_to_transfer > MAX_TRANSFER_PACKETS) {
+			/*
+			 * Limit the number of packet and data transferred to
+			 * what the hardware can handle
+			 */
+			packets_to_transfer = MAX_TRANSFER_PACKETS;
+			bytes_to_transfer = packets_to_transfer *
+				pipe->max_packet;
+		}
+
+		usbc_hctsiz.s.xfersize = bytes_to_transfer;
+		usbc_hctsiz.s.pktcnt = packets_to_transfer;
+
+		/* Update the DATA0/DATA1 toggle */
+		usbc_hctsiz.s.pid = cvmx_usb_get_data_pid(pipe);
+		/*
+		 * High speed pipes may need a hardware ping before they start
+		 */
+		if (pipe->flags & CVMX_USB_PIPE_FLAGS_NEED_PING)
+			usbc_hctsiz.s.dopng = 1;
+
+		cvmx_usb_write_csr32(usb,
+				     CVMX_USBCX_HCSPLTX(channel, usb->index),
+				     usbc_hcsplt.u32);
+		cvmx_usb_write_csr32(usb,
+				     CVMX_USBCX_HCTSIZX(channel, usb->index),
+				     usbc_hctsiz.u32);
+	}
+
+	/* Setup the Host Channel Characteristics Register */
+	{
+		union cvmx_usbcx_hccharx usbc_hcchar = {.u32 = 0};
+
+		/*
+		 * Set the startframe odd/even properly. This is only used for
+		 * periodic
+		 */
+		usbc_hcchar.s.oddfrm = usb->frame_number & 1;
+
+		/*
+		 * Set the number of back to back packets allowed by this
+		 * endpoint. Split transactions interpret "ec" as the number of
+		 * immediate retries of failure. These retries happen too
+		 * quickly, so we disable these entirely for splits
+		 */
+		if (cvmx_usb_pipe_needs_split(usb, pipe))
+			usbc_hcchar.s.ec = 1;
+		else if (pipe->multi_count < 1)
+			usbc_hcchar.s.ec = 1;
+		else if (pipe->multi_count > 3)
+			usbc_hcchar.s.ec = 3;
+		else
+			usbc_hcchar.s.ec = pipe->multi_count;
+
+		/* Set the rest of the endpoint specific settings */
+		usbc_hcchar.s.devaddr = pipe->device_addr;
+		usbc_hcchar.s.eptype = transaction->type;
+		usbc_hcchar.s.lspddev =
+			(pipe->device_speed == CVMX_USB_SPEED_LOW);
+		usbc_hcchar.s.epdir = pipe->transfer_dir;
+		usbc_hcchar.s.epnum = pipe->endpoint_num;
+		usbc_hcchar.s.mps = pipe->max_packet;
+		cvmx_usb_write_csr32(usb,
+				     CVMX_USBCX_HCCHARX(channel, usb->index),
+				     usbc_hcchar.u32);
+	}
+
+	/* Do transaction type specific fixups as needed */
+	switch (transaction->type) {
+	case CVMX_USB_TRANSFER_CONTROL:
+		cvmx_usb_start_channel_control(usb, channel, pipe);
+		break;
+	case CVMX_USB_TRANSFER_BULK:
+	case CVMX_USB_TRANSFER_INTERRUPT:
+		break;
+	case CVMX_USB_TRANSFER_ISOCHRONOUS:
+		if (!cvmx_usb_pipe_needs_split(usb, pipe)) {
+			/*
+			 * ISO transactions require different PIDs depending on
+			 * direction and how many packets are needed
+			 */
+			if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) {
+				if (pipe->multi_count < 2) /* Need DATA0 */
+					USB_SET_FIELD32(
+						CVMX_USBCX_HCTSIZX(channel,
+								   usb->index),
+						cvmx_usbcx_hctsizx, pid, 0);
+				else /* Need MDATA */
+					USB_SET_FIELD32(
+						CVMX_USBCX_HCTSIZX(channel,
+								   usb->index),
+						cvmx_usbcx_hctsizx, pid, 3);
+			}
+		}
+		break;
+	}
+	{
+		union cvmx_usbcx_hctsizx usbc_hctsiz = { .u32 =
+			cvmx_usb_read_csr32(usb,
+					    CVMX_USBCX_HCTSIZX(channel,
+							       usb->index))
+		};
+		transaction->xfersize = usbc_hctsiz.s.xfersize;
+		transaction->pktcnt = usbc_hctsiz.s.pktcnt;
+	}
+	/* Remember when we start a split transaction */
+	if (cvmx_usb_pipe_needs_split(usb, pipe))
+		usb->active_split = transaction;
+	USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
+			cvmx_usbcx_hccharx, chena, 1);
+	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+		cvmx_usb_fill_tx_fifo(usb, channel);
+}
+
+/**
+ * Find a pipe that is ready to be scheduled to hardware.
+ * @usb:	 USB device state populated by cvmx_usb_initialize().
+ * @xfer_type:	 Transfer type
+ *
+ * Returns: Pipe or NULL if none are ready
+ */
+static struct cvmx_usb_pipe *cvmx_usb_find_ready_pipe(struct octeon_hcd *usb,
+						      enum cvmx_usb_transfer xfer_type)
+{
+	struct list_head *list = usb->active_pipes + xfer_type;
+	u64 current_frame = usb->frame_number;
+	struct cvmx_usb_pipe *pipe;
+
+	list_for_each_entry(pipe, list, node) {
+		struct cvmx_usb_transaction *t =
+			list_first_entry(&pipe->transactions, typeof(*t),
+					 node);
+		if (!(pipe->flags & CVMX_USB_PIPE_FLAGS_SCHEDULED) && t &&
+		    (pipe->next_tx_frame <= current_frame) &&
+		    ((pipe->split_sc_frame == -1) ||
+		     ((((int)current_frame - pipe->split_sc_frame) & 0x7f) <
+		      0x40)) &&
+		    (!usb->active_split || (usb->active_split == t))) {
+			prefetch(t);
+			return pipe;
+		}
+	}
+	return NULL;
+}
+
+static struct cvmx_usb_pipe *cvmx_usb_next_pipe(struct octeon_hcd *usb,
+						int is_sof)
+{
+	struct cvmx_usb_pipe *pipe;
+
+	/* Find a pipe needing service. */
+	if (is_sof) {
+		/*
+		 * Only process periodic pipes on SOF interrupts. This way we
+		 * are sure that the periodic data is sent in the beginning of
+		 * the frame.
+		 */
+		pipe = cvmx_usb_find_ready_pipe(usb,
+						CVMX_USB_TRANSFER_ISOCHRONOUS);
+		if (pipe)
+			return pipe;
+		pipe = cvmx_usb_find_ready_pipe(usb,
+						CVMX_USB_TRANSFER_INTERRUPT);
+		if (pipe)
+			return pipe;
+	}
+	pipe = cvmx_usb_find_ready_pipe(usb, CVMX_USB_TRANSFER_CONTROL);
+	if (pipe)
+		return pipe;
+	return cvmx_usb_find_ready_pipe(usb, CVMX_USB_TRANSFER_BULK);
+}
+
+/**
+ * Called whenever a pipe might need to be scheduled to the
+ * hardware.
+ *
+ * @usb:	 USB device state populated by cvmx_usb_initialize().
+ * @is_sof:	 True if this schedule was called on a SOF interrupt.
+ */
+static void cvmx_usb_schedule(struct octeon_hcd *usb, int is_sof)
+{
+	int channel;
+	struct cvmx_usb_pipe *pipe;
+	int need_sof;
+	enum cvmx_usb_transfer ttype;
+
+	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
+		/*
+		 * Without DMA we need to be careful to not schedule something
+		 * at the end of a frame and cause an overrun.
+		 */
+		union cvmx_usbcx_hfnum hfnum = {
+			.u32 = cvmx_usb_read_csr32(usb,
+						CVMX_USBCX_HFNUM(usb->index))
+		};
+
+		union cvmx_usbcx_hfir hfir = {
+			.u32 = cvmx_usb_read_csr32(usb,
+						CVMX_USBCX_HFIR(usb->index))
+		};
+
+		if (hfnum.s.frrem < hfir.s.frint / 4)
+			goto done;
+	}
+
+	while (usb->idle_hardware_channels) {
+		/* Find an idle channel */
+		channel = __fls(usb->idle_hardware_channels);
+		if (unlikely(channel > 7))
+			break;
+
+		pipe = cvmx_usb_next_pipe(usb, is_sof);
+		if (!pipe)
+			break;
+
+		cvmx_usb_start_channel(usb, channel, pipe);
+	}
+
+done:
+	/*
+	 * Only enable SOF interrupts when we have transactions pending in the
+	 * future that might need to be scheduled
+	 */
+	need_sof = 0;
+	for (ttype = CVMX_USB_TRANSFER_CONTROL;
+	     ttype <= CVMX_USB_TRANSFER_INTERRUPT; ttype++) {
+		list_for_each_entry(pipe, &usb->active_pipes[ttype], node) {
+			if (pipe->next_tx_frame > usb->frame_number) {
+				need_sof = 1;
+				break;
+			}
+		}
+	}
+	USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index),
+			cvmx_usbcx_gintmsk, sofmsk, need_sof);
+}
+
+static void octeon_usb_urb_complete_callback(struct octeon_hcd *usb,
+					     enum cvmx_usb_status status,
+					     struct cvmx_usb_pipe *pipe,
+					     struct cvmx_usb_transaction
+						*transaction,
+					     int bytes_transferred,
+					     struct urb *urb)
+{
+	struct usb_hcd *hcd = octeon_to_hcd(usb);
+	struct device *dev = hcd->self.controller;
+
+	if (likely(status == CVMX_USB_STATUS_OK))
+		urb->actual_length = bytes_transferred;
+	else
+		urb->actual_length = 0;
+
+	urb->hcpriv = NULL;
+
+	/* For Isochronous transactions we need to update the URB packet status
+	 * list from data in our private copy
+	 */
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+		int i;
+		/*
+		 * The pointer to the private list is stored in the setup_packet
+		 * field.
+		 */
+		struct cvmx_usb_iso_packet *iso_packet =
+			(struct cvmx_usb_iso_packet *)urb->setup_packet;
+		/* Recalculate the transfer size by adding up each packet */
+		urb->actual_length = 0;
+		for (i = 0; i < urb->number_of_packets; i++) {
+			if (iso_packet[i].status == CVMX_USB_STATUS_OK) {
+				urb->iso_frame_desc[i].status = 0;
+				urb->iso_frame_desc[i].actual_length =
+					iso_packet[i].length;
+				urb->actual_length +=
+					urb->iso_frame_desc[i].actual_length;
+			} else {
+				dev_dbg(dev, "ISOCHRONOUS packet=%d of %d status=%d pipe=%p transaction=%p size=%d\n",
+					i, urb->number_of_packets,
+					iso_packet[i].status, pipe,
+					transaction, iso_packet[i].length);
+				urb->iso_frame_desc[i].status = -EREMOTEIO;
+			}
+		}
+		/* Free the private list now that we don't need it anymore */
+		kfree(iso_packet);
+		urb->setup_packet = NULL;
+	}
+
+	switch (status) {
+	case CVMX_USB_STATUS_OK:
+		urb->status = 0;
+		break;
+	case CVMX_USB_STATUS_CANCEL:
+		if (urb->status == 0)
+			urb->status = -ENOENT;
+		break;
+	case CVMX_USB_STATUS_STALL:
+		dev_dbg(dev, "status=stall pipe=%p transaction=%p size=%d\n",
+			pipe, transaction, bytes_transferred);
+		urb->status = -EPIPE;
+		break;
+	case CVMX_USB_STATUS_BABBLEERR:
+		dev_dbg(dev, "status=babble pipe=%p transaction=%p size=%d\n",
+			pipe, transaction, bytes_transferred);
+		urb->status = -EPIPE;
+		break;
+	case CVMX_USB_STATUS_SHORT:
+		dev_dbg(dev, "status=short pipe=%p transaction=%p size=%d\n",
+			pipe, transaction, bytes_transferred);
+		urb->status = -EREMOTEIO;
+		break;
+	case CVMX_USB_STATUS_ERROR:
+	case CVMX_USB_STATUS_XACTERR:
+	case CVMX_USB_STATUS_DATATGLERR:
+	case CVMX_USB_STATUS_FRAMEERR:
+		dev_dbg(dev, "status=%d pipe=%p transaction=%p size=%d\n",
+			status, pipe, transaction, bytes_transferred);
+		urb->status = -EPROTO;
+		break;
+	}
+	usb_hcd_unlink_urb_from_ep(octeon_to_hcd(usb), urb);
+	spin_unlock(&usb->lock);
+	usb_hcd_giveback_urb(octeon_to_hcd(usb), urb, urb->status);
+	spin_lock(&usb->lock);
+}
+
+/**
+ * Signal the completion of a transaction and free it. The
+ * transaction will be removed from the pipe transaction list.
+ *
+ * @usb:	 USB device state populated by cvmx_usb_initialize().
+ * @pipe:	 Pipe the transaction is on
+ * @transaction:
+ *		 Transaction that completed
+ * @complete_code:
+ *		 Completion code
+ */
+static void cvmx_usb_complete(struct octeon_hcd *usb,
+			      struct cvmx_usb_pipe *pipe,
+			      struct cvmx_usb_transaction *transaction,
+			      enum cvmx_usb_status complete_code)
+{
+	/* If this was a split then clear our split in progress marker */
+	if (usb->active_split == transaction)
+		usb->active_split = NULL;
+
+	/*
+	 * Isochronous transactions need extra processing as they might not be
+	 * done after a single data transfer
+	 */
+	if (unlikely(transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)) {
+		/* Update the number of bytes transferred in this ISO packet */
+		transaction->iso_packets[0].length = transaction->actual_bytes;
+		transaction->iso_packets[0].status = complete_code;
+
+		/*
+		 * If there are more ISOs pending and we succeeded, schedule the
+		 * next one
+		 */
+		if ((transaction->iso_number_packets > 1) &&
+		    (complete_code == CVMX_USB_STATUS_OK)) {
+			/* No bytes transferred for this packet as of yet */
+			transaction->actual_bytes = 0;
+			/* One less ISO waiting to transfer */
+			transaction->iso_number_packets--;
+			/* Increment to the next location in our packet array */
+			transaction->iso_packets++;
+			transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
+			return;
+		}
+	}
+
+	/* Remove the transaction from the pipe list */
+	list_del(&transaction->node);
+	if (list_empty(&pipe->transactions))
+		list_move_tail(&pipe->node, &usb->idle_pipes);
+	octeon_usb_urb_complete_callback(usb, complete_code, pipe,
+					 transaction,
+					 transaction->actual_bytes,
+					 transaction->urb);
+	kfree(transaction);
+}
+
+/**
+ * Submit a usb transaction to a pipe. Called for all types
+ * of transactions.
+ *
+ * @usb:
+ * @pipe:	    Which pipe to submit to.
+ * @type:	    Transaction type
+ * @buffer:	    User buffer for the transaction
+ * @buffer_length:
+ *		    User buffer's length in bytes
+ * @control_header:
+ *		    For control transactions, the 8 byte standard header
+ * @iso_start_frame:
+ *		    For ISO transactions, the start frame
+ * @iso_number_packets:
+ *		    For ISO, the number of packet in the transaction.
+ * @iso_packets:
+ *		    A description of each ISO packet
+ * @urb:	    URB for the callback
+ *
+ * Returns: Transaction or NULL on failure.
+ */
+static struct cvmx_usb_transaction *cvmx_usb_submit_transaction(
+				struct octeon_hcd *usb,
+				struct cvmx_usb_pipe *pipe,
+				enum cvmx_usb_transfer type,
+				u64 buffer,
+				int buffer_length,
+				u64 control_header,
+				int iso_start_frame,
+				int iso_number_packets,
+				struct cvmx_usb_iso_packet *iso_packets,
+				struct urb *urb)
+{
+	struct cvmx_usb_transaction *transaction;
+
+	if (unlikely(pipe->transfer_type != type))
+		return NULL;
+
+	transaction = kzalloc(sizeof(*transaction), GFP_ATOMIC);
+	if (unlikely(!transaction))
+		return NULL;
+
+	transaction->type = type;
+	transaction->buffer = buffer;
+	transaction->buffer_length = buffer_length;
+	transaction->control_header = control_header;
+	/* FIXME: This is not used, implement it. */
+	transaction->iso_start_frame = iso_start_frame;
+	transaction->iso_number_packets = iso_number_packets;
+	transaction->iso_packets = iso_packets;
+	transaction->urb = urb;
+	if (transaction->type == CVMX_USB_TRANSFER_CONTROL)
+		transaction->stage = CVMX_USB_STAGE_SETUP;
+	else
+		transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
+
+	if (!list_empty(&pipe->transactions)) {
+		list_add_tail(&transaction->node, &pipe->transactions);
+	} else {
+		list_add_tail(&transaction->node, &pipe->transactions);
+		list_move_tail(&pipe->node,
+			       &usb->active_pipes[pipe->transfer_type]);
+
+		/*
+		 * We may need to schedule the pipe if this was the head of the
+		 * pipe.
+		 */
+		cvmx_usb_schedule(usb, 0);
+	}
+
+	return transaction;
+}
+
+/**
+ * Call to submit a USB Bulk transfer to a pipe.
+ *
+ * @usb:	    USB device state populated by cvmx_usb_initialize().
+ * @pipe:	    Handle to the pipe for the transfer.
+ * @urb:	    URB.
+ *
+ * Returns: A submitted transaction or NULL on failure.
+ */
+static struct cvmx_usb_transaction *cvmx_usb_submit_bulk(
+						struct octeon_hcd *usb,
+						struct cvmx_usb_pipe *pipe,
+						struct urb *urb)
+{
+	return cvmx_usb_submit_transaction(usb, pipe, CVMX_USB_TRANSFER_BULK,
+					   urb->transfer_dma,
+					   urb->transfer_buffer_length,
+					   0, /* control_header */
+					   0, /* iso_start_frame */
+					   0, /* iso_number_packets */
+					   NULL, /* iso_packets */
+					   urb);
+}
+
+/**
+ * Call to submit a USB Interrupt transfer to a pipe.
+ *
+ * @usb:	    USB device state populated by cvmx_usb_initialize().
+ * @pipe:	    Handle to the pipe for the transfer.
+ * @urb:	    URB returned when the callback is called.
+ *
+ * Returns: A submitted transaction or NULL on failure.
+ */
+static struct cvmx_usb_transaction *cvmx_usb_submit_interrupt(
+						struct octeon_hcd *usb,
+						struct cvmx_usb_pipe *pipe,
+						struct urb *urb)
+{
+	return cvmx_usb_submit_transaction(usb, pipe,
+					   CVMX_USB_TRANSFER_INTERRUPT,
+					   urb->transfer_dma,
+					   urb->transfer_buffer_length,
+					   0, /* control_header */
+					   0, /* iso_start_frame */
+					   0, /* iso_number_packets */
+					   NULL, /* iso_packets */
+					   urb);
+}
+
+/**
+ * Call to submit a USB Control transfer to a pipe.
+ *
+ * @usb:	    USB device state populated by cvmx_usb_initialize().
+ * @pipe:	    Handle to the pipe for the transfer.
+ * @urb:	    URB.
+ *
+ * Returns: A submitted transaction or NULL on failure.
+ */
+static struct cvmx_usb_transaction *cvmx_usb_submit_control(
+						struct octeon_hcd *usb,
+						struct cvmx_usb_pipe *pipe,
+						struct urb *urb)
+{
+	int buffer_length = urb->transfer_buffer_length;
+	u64 control_header = urb->setup_dma;
+	struct usb_ctrlrequest *header = cvmx_phys_to_ptr(control_header);
+
+	if ((header->bRequestType & USB_DIR_IN) == 0)
+		buffer_length = le16_to_cpu(header->wLength);
+
+	return cvmx_usb_submit_transaction(usb, pipe,
+					   CVMX_USB_TRANSFER_CONTROL,
+					   urb->transfer_dma, buffer_length,
+					   control_header,
+					   0, /* iso_start_frame */
+					   0, /* iso_number_packets */
+					   NULL, /* iso_packets */
+					   urb);
+}
+
+/**
+ * Call to submit a USB Isochronous transfer to a pipe.
+ *
+ * @usb:	    USB device state populated by cvmx_usb_initialize().
+ * @pipe:	    Handle to the pipe for the transfer.
+ * @urb:	    URB returned when the callback is called.
+ *
+ * Returns: A submitted transaction or NULL on failure.
+ */
+static struct cvmx_usb_transaction *cvmx_usb_submit_isochronous(
+						struct octeon_hcd *usb,
+						struct cvmx_usb_pipe *pipe,
+						struct urb *urb)
+{
+	struct cvmx_usb_iso_packet *packets;
+
+	packets = (struct cvmx_usb_iso_packet *)urb->setup_packet;
+	return cvmx_usb_submit_transaction(usb, pipe,
+					   CVMX_USB_TRANSFER_ISOCHRONOUS,
+					   urb->transfer_dma,
+					   urb->transfer_buffer_length,
+					   0, /* control_header */
+					   urb->start_frame,
+					   urb->number_of_packets,
+					   packets, urb);
+}
+
+/**
+ * Cancel one outstanding request in a pipe. Canceling a request
+ * can fail if the transaction has already completed before cancel
+ * is called. Even after a successful cancel call, it may take
+ * a frame or two for the cvmx_usb_poll() function to call the
+ * associated callback.
+ *
+ * @usb:	 USB device state populated by cvmx_usb_initialize().
+ * @pipe:	 Pipe to cancel requests in.
+ * @transaction: Transaction to cancel, returned by the submit function.
+ *
+ * Returns: 0 or a negative error code.
+ */
+static int cvmx_usb_cancel(struct octeon_hcd *usb,
+			   struct cvmx_usb_pipe *pipe,
+			   struct cvmx_usb_transaction *transaction)
+{
+	/*
+	 * If the transaction is the HEAD of the queue and scheduled. We need to
+	 * treat it special
+	 */
+	if (list_first_entry(&pipe->transactions, typeof(*transaction), node) ==
+	    transaction && (pipe->flags & CVMX_USB_PIPE_FLAGS_SCHEDULED)) {
+		union cvmx_usbcx_hccharx usbc_hcchar;
+
+		usb->pipe_for_channel[pipe->channel] = NULL;
+		pipe->flags &= ~CVMX_USB_PIPE_FLAGS_SCHEDULED;
+
+		CVMX_SYNCW;
+
+		usbc_hcchar.u32 = cvmx_usb_read_csr32(usb,
+						      CVMX_USBCX_HCCHARX(pipe->channel,
+									 usb->index));
+		/*
+		 * If the channel isn't enabled then the transaction already
+		 * completed.
+		 */
+		if (usbc_hcchar.s.chena) {
+			usbc_hcchar.s.chdis = 1;
+			cvmx_usb_write_csr32(usb,
+					     CVMX_USBCX_HCCHARX(pipe->channel,
+								usb->index),
+					     usbc_hcchar.u32);
+		}
+	}
+	cvmx_usb_complete(usb, pipe, transaction, CVMX_USB_STATUS_CANCEL);
+	return 0;
+}
+
+/**
+ * Cancel all outstanding requests in a pipe. Logically all this
+ * does is call cvmx_usb_cancel() in a loop.
+ *
+ * @usb:	 USB device state populated by cvmx_usb_initialize().
+ * @pipe:	 Pipe to cancel requests in.
+ *
+ * Returns: 0 or a negative error code.
+ */
+static int cvmx_usb_cancel_all(struct octeon_hcd *usb,
+			       struct cvmx_usb_pipe *pipe)
+{
+	struct cvmx_usb_transaction *transaction, *next;
+
+	/* Simply loop through and attempt to cancel each transaction */
+	list_for_each_entry_safe(transaction, next, &pipe->transactions, node) {
+		int result = cvmx_usb_cancel(usb, pipe, transaction);
+
+		if (unlikely(result != 0))
+			return result;
+	}
+	return 0;
+}
+
+/**
+ * Close a pipe created with cvmx_usb_open_pipe().
+ *
+ * @usb:	 USB device state populated by cvmx_usb_initialize().
+ * @pipe:	 Pipe to close.
+ *
+ * Returns: 0 or a negative error code. EBUSY is returned if the pipe has
+ *	    outstanding transfers.
+ */
+static int cvmx_usb_close_pipe(struct octeon_hcd *usb,
+			       struct cvmx_usb_pipe *pipe)
+{
+	/* Fail if the pipe has pending transactions */
+	if (!list_empty(&pipe->transactions))
+		return -EBUSY;
+
+	list_del(&pipe->node);
+	kfree(pipe);
+
+	return 0;
+}
+
+/**
+ * Get the current USB protocol level frame number. The frame
+ * number is always in the range of 0-0x7ff.
+ *
+ * @usb: USB device state populated by cvmx_usb_initialize().
+ *
+ * Returns: USB frame number
+ */
+static int cvmx_usb_get_frame_number(struct octeon_hcd *usb)
+{
+	union cvmx_usbcx_hfnum usbc_hfnum;
+
+	usbc_hfnum.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index));
+
+	return usbc_hfnum.s.frnum;
+}
+
+static void cvmx_usb_transfer_control(struct octeon_hcd *usb,
+				      struct cvmx_usb_pipe *pipe,
+				      struct cvmx_usb_transaction *transaction,
+				      union cvmx_usbcx_hccharx usbc_hcchar,
+				      int buffer_space_left,
+				      int bytes_in_last_packet)
+{
+	switch (transaction->stage) {
+	case CVMX_USB_STAGE_NON_CONTROL:
+	case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE:
+		/* This should be impossible */
+		cvmx_usb_complete(usb, pipe, transaction,
+				  CVMX_USB_STATUS_ERROR);
+		break;
+	case CVMX_USB_STAGE_SETUP:
+		pipe->pid_toggle = 1;
+		if (cvmx_usb_pipe_needs_split(usb, pipe)) {
+			transaction->stage =
+				CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE;
+		} else {
+			struct usb_ctrlrequest *header =
+				cvmx_phys_to_ptr(transaction->control_header);
+			if (header->wLength)
+				transaction->stage = CVMX_USB_STAGE_DATA;
+			else
+				transaction->stage = CVMX_USB_STAGE_STATUS;
+		}
+		break;
+	case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE:
+		{
+			struct usb_ctrlrequest *header =
+				cvmx_phys_to_ptr(transaction->control_header);
+			if (header->wLength)
+				transaction->stage = CVMX_USB_STAGE_DATA;
+			else
+				transaction->stage = CVMX_USB_STAGE_STATUS;
+		}
+		break;
+	case CVMX_USB_STAGE_DATA:
+		if (cvmx_usb_pipe_needs_split(usb, pipe)) {
+			transaction->stage = CVMX_USB_STAGE_DATA_SPLIT_COMPLETE;
+			/*
+			 * For setup OUT data that are splits,
+			 * the hardware doesn't appear to count
+			 * transferred data. Here we manually
+			 * update the data transferred
+			 */
+			if (!usbc_hcchar.s.epdir) {
+				if (buffer_space_left < pipe->max_packet)
+					transaction->actual_bytes +=
+						buffer_space_left;
+				else
+					transaction->actual_bytes +=
+						pipe->max_packet;
+			}
+		} else if ((buffer_space_left == 0) ||
+			   (bytes_in_last_packet < pipe->max_packet)) {
+			pipe->pid_toggle = 1;
+			transaction->stage = CVMX_USB_STAGE_STATUS;
+		}
+		break;
+	case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE:
+		if ((buffer_space_left == 0) ||
+		    (bytes_in_last_packet < pipe->max_packet)) {
+			pipe->pid_toggle = 1;
+			transaction->stage = CVMX_USB_STAGE_STATUS;
+		} else {
+			transaction->stage = CVMX_USB_STAGE_DATA;
+		}
+		break;
+	case CVMX_USB_STAGE_STATUS:
+		if (cvmx_usb_pipe_needs_split(usb, pipe))
+			transaction->stage =
+				CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE;
+		else
+			cvmx_usb_complete(usb, pipe, transaction,
+					  CVMX_USB_STATUS_OK);
+		break;
+	case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE:
+		cvmx_usb_complete(usb, pipe, transaction, CVMX_USB_STATUS_OK);
+		break;
+	}
+}
+
+static void cvmx_usb_transfer_bulk(struct octeon_hcd *usb,
+				   struct cvmx_usb_pipe *pipe,
+				   struct cvmx_usb_transaction *transaction,
+				   union cvmx_usbcx_hcintx usbc_hcint,
+				   int buffer_space_left,
+				   int bytes_in_last_packet)
+{
+	/*
+	 * The only time a bulk transfer isn't complete when it finishes with
+	 * an ACK is during a split transaction. For splits we need to continue
+	 * the transfer if more data is needed.
+	 */
+	if (cvmx_usb_pipe_needs_split(usb, pipe)) {
+		if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL)
+			transaction->stage =
+				CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE;
+		else if (buffer_space_left &&
+			 (bytes_in_last_packet == pipe->max_packet))
+			transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
+		else
+			cvmx_usb_complete(usb, pipe, transaction,
+					  CVMX_USB_STATUS_OK);
+	} else {
+		if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) &&
+		    (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) &&
+		    (usbc_hcint.s.nak))
+			pipe->flags |= CVMX_USB_PIPE_FLAGS_NEED_PING;
+		if (!buffer_space_left ||
+		    (bytes_in_last_packet < pipe->max_packet))
+			cvmx_usb_complete(usb, pipe, transaction,
+					  CVMX_USB_STATUS_OK);
+	}
+}
+
+static void cvmx_usb_transfer_intr(struct octeon_hcd *usb,
+				   struct cvmx_usb_pipe *pipe,
+				   struct cvmx_usb_transaction *transaction,
+				   int buffer_space_left,
+				   int bytes_in_last_packet)
+{
+	if (cvmx_usb_pipe_needs_split(usb, pipe)) {
+		if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL) {
+			transaction->stage =
+				CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE;
+		} else if (buffer_space_left &&
+			   (bytes_in_last_packet == pipe->max_packet)) {
+			transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
+		} else {
+			pipe->next_tx_frame += pipe->interval;
+			cvmx_usb_complete(usb, pipe, transaction,
+					  CVMX_USB_STATUS_OK);
+		}
+	} else if (!buffer_space_left ||
+		   (bytes_in_last_packet < pipe->max_packet)) {
+		pipe->next_tx_frame += pipe->interval;
+		cvmx_usb_complete(usb, pipe, transaction, CVMX_USB_STATUS_OK);
+	}
+}
+
+static void cvmx_usb_transfer_isoc(struct octeon_hcd *usb,
+				   struct cvmx_usb_pipe *pipe,
+				   struct cvmx_usb_transaction *transaction,
+				   int buffer_space_left,
+				   int bytes_in_last_packet,
+				   int bytes_this_transfer)
+{
+	if (cvmx_usb_pipe_needs_split(usb, pipe)) {
+		/*
+		 * ISOCHRONOUS OUT splits don't require a complete split stage.
+		 * Instead they use a sequence of begin OUT splits to transfer
+		 * the data 188 bytes at a time. Once the transfer is complete,
+		 * the pipe sleeps until the next schedule interval.
+		 */
+		if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) {
+			/*
+			 * If no space left or this wasn't a max size packet
+			 * then this transfer is complete. Otherwise start it
+			 * again to send the next 188 bytes
+			 */
+			if (!buffer_space_left || (bytes_this_transfer < 188)) {
+				pipe->next_tx_frame += pipe->interval;
+				cvmx_usb_complete(usb, pipe, transaction,
+						  CVMX_USB_STATUS_OK);
+			}
+			return;
+		}
+		if (transaction->stage ==
+		    CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE) {
+			/*
+			 * We are in the incoming data phase. Keep getting data
+			 * until we run out of space or get a small packet
+			 */
+			if ((buffer_space_left == 0) ||
+			    (bytes_in_last_packet < pipe->max_packet)) {
+				pipe->next_tx_frame += pipe->interval;
+				cvmx_usb_complete(usb, pipe, transaction,
+						  CVMX_USB_STATUS_OK);
+			}
+		} else {
+			transaction->stage =
+				CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE;
+		}
+	} else {
+		pipe->next_tx_frame += pipe->interval;
+		cvmx_usb_complete(usb, pipe, transaction, CVMX_USB_STATUS_OK);
+	}
+}
+
+/**
+ * Poll a channel for status
+ *
+ * @usb:     USB device
+ * @channel: Channel to poll
+ *
+ * Returns: Zero on success
+ */
+static int cvmx_usb_poll_channel(struct octeon_hcd *usb, int channel)
+{
+	struct usb_hcd *hcd = octeon_to_hcd(usb);
+	struct device *dev = hcd->self.controller;
+	union cvmx_usbcx_hcintx usbc_hcint;
+	union cvmx_usbcx_hctsizx usbc_hctsiz;
+	union cvmx_usbcx_hccharx usbc_hcchar;
+	struct cvmx_usb_pipe *pipe;
+	struct cvmx_usb_transaction *transaction;
+	int bytes_this_transfer;
+	int bytes_in_last_packet;
+	int packets_processed;
+	int buffer_space_left;
+
+	/* Read the interrupt status bits for the channel */
+	usbc_hcint.u32 = cvmx_usb_read_csr32(usb,
+					     CVMX_USBCX_HCINTX(channel, usb->index));
+
+	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
+		usbc_hcchar.u32 = cvmx_usb_read_csr32(usb,
+						      CVMX_USBCX_HCCHARX(channel,
+									 usb->index));
+
+		if (usbc_hcchar.s.chena && usbc_hcchar.s.chdis) {
+			/*
+			 * There seems to be a bug in CN31XX which can cause
+			 * interrupt IN transfers to get stuck until we do a
+			 * write of HCCHARX without changing things
+			 */
+			cvmx_usb_write_csr32(usb,
+					     CVMX_USBCX_HCCHARX(channel,
+								usb->index),
+					     usbc_hcchar.u32);
+			return 0;
+		}
+
+		/*
+		 * In non DMA mode the channels don't halt themselves. We need
+		 * to manually disable channels that are left running
+		 */
+		if (!usbc_hcint.s.chhltd) {
+			if (usbc_hcchar.s.chena) {
+				union cvmx_usbcx_hcintmskx hcintmsk;
+				/* Disable all interrupts except CHHLTD */
+				hcintmsk.u32 = 0;
+				hcintmsk.s.chhltdmsk = 1;
+				cvmx_usb_write_csr32(usb,
+						     CVMX_USBCX_HCINTMSKX(channel, usb->index),
+						     hcintmsk.u32);
+				usbc_hcchar.s.chdis = 1;
+				cvmx_usb_write_csr32(usb,
+						     CVMX_USBCX_HCCHARX(channel, usb->index),
+						     usbc_hcchar.u32);
+				return 0;
+			} else if (usbc_hcint.s.xfercompl) {
+				/*
+				 * Successful IN/OUT with transfer complete.
+				 * Channel halt isn't needed.
+				 */
+			} else {
+				dev_err(dev, "USB%d: Channel %d interrupt without halt\n",
+					usb->index, channel);
+				return 0;
+			}
+		}
+	} else {
+		/*
+		 * There is are no interrupts that we need to process when the
+		 * channel is still running
+		 */
+		if (!usbc_hcint.s.chhltd)
+			return 0;
+	}
+
+	/* Disable the channel interrupts now that it is done */
+	cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0);
+	usb->idle_hardware_channels |= (1 << channel);
+
+	/* Make sure this channel is tied to a valid pipe */
+	pipe = usb->pipe_for_channel[channel];
+	prefetch(pipe);
+	if (!pipe)
+		return 0;
+	transaction = list_first_entry(&pipe->transactions,
+				       typeof(*transaction),
+				       node);
+	prefetch(transaction);
+
+	/*
+	 * Disconnect this pipe from the HW channel. Later the schedule
+	 * function will figure out which pipe needs to go
+	 */
+	usb->pipe_for_channel[channel] = NULL;
+	pipe->flags &= ~CVMX_USB_PIPE_FLAGS_SCHEDULED;
+
+	/*
+	 * Read the channel config info so we can figure out how much data
+	 * transferred
+	 */
+	usbc_hcchar.u32 = cvmx_usb_read_csr32(usb,
+					      CVMX_USBCX_HCCHARX(channel, usb->index));
+	usbc_hctsiz.u32 = cvmx_usb_read_csr32(usb,
+					      CVMX_USBCX_HCTSIZX(channel, usb->index));
+
+	/*
+	 * Calculating the number of bytes successfully transferred is dependent
+	 * on the transfer direction
+	 */
+	packets_processed = transaction->pktcnt - usbc_hctsiz.s.pktcnt;
+	if (usbc_hcchar.s.epdir) {
+		/*
+		 * IN transactions are easy. For every byte received the
+		 * hardware decrements xfersize. All we need to do is subtract
+		 * the current value of xfersize from its starting value and we
+		 * know how many bytes were written to the buffer
+		 */
+		bytes_this_transfer = transaction->xfersize -
+			usbc_hctsiz.s.xfersize;
+	} else {
+		/*
+		 * OUT transaction don't decrement xfersize. Instead pktcnt is
+		 * decremented on every successful packet send. The hardware
+		 * does this when it receives an ACK, or NYET. If it doesn't
+		 * receive one of these responses pktcnt doesn't change
+		 */
+		bytes_this_transfer = packets_processed * usbc_hcchar.s.mps;
+		/*
+		 * The last packet may not be a full transfer if we didn't have
+		 * enough data
+		 */
+		if (bytes_this_transfer > transaction->xfersize)
+			bytes_this_transfer = transaction->xfersize;
+	}
+	/* Figure out how many bytes were in the last packet of the transfer */
+	if (packets_processed)
+		bytes_in_last_packet = bytes_this_transfer -
+			(packets_processed - 1) * usbc_hcchar.s.mps;
+	else
+		bytes_in_last_packet = bytes_this_transfer;
+
+	/*
+	 * As a special case, setup transactions output the setup header, not
+	 * the user's data. For this reason we don't count setup data as bytes
+	 * transferred
+	 */
+	if ((transaction->stage == CVMX_USB_STAGE_SETUP) ||
+	    (transaction->stage == CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE))
+		bytes_this_transfer = 0;
+
+	/*
+	 * Add the bytes transferred to the running total. It is important that
+	 * bytes_this_transfer doesn't count any data that needs to be
+	 * retransmitted
+	 */
+	transaction->actual_bytes += bytes_this_transfer;
+	if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
+		buffer_space_left = transaction->iso_packets[0].length -
+			transaction->actual_bytes;
+	else
+		buffer_space_left = transaction->buffer_length -
+			transaction->actual_bytes;
+
+	/*
+	 * We need to remember the PID toggle state for the next transaction.
+	 * The hardware already updated it for the next transaction
+	 */
+	pipe->pid_toggle = !(usbc_hctsiz.s.pid == 0);
+
+	/*
+	 * For high speed bulk out, assume the next transaction will need to do
+	 * a ping before proceeding. If this isn't true the ACK processing below
+	 * will clear this flag
+	 */
+	if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) &&
+	    (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) &&
+	    (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT))
+		pipe->flags |= CVMX_USB_PIPE_FLAGS_NEED_PING;
+
+	if (WARN_ON_ONCE(bytes_this_transfer < 0)) {
+		/*
+		 * In some rare cases the DMA engine seems to get stuck and
+		 * keeps substracting same byte count over and over again. In
+		 * such case we just need to fail every transaction.
+		 */
+		cvmx_usb_complete(usb, pipe, transaction,
+				  CVMX_USB_STATUS_ERROR);
+		return 0;
+	}
+
+	if (usbc_hcint.s.stall) {
+		/*
+		 * STALL as a response means this transaction cannot be
+		 * completed because the device can't process transactions. Tell
+		 * the user. Any data that was transferred will be counted on
+		 * the actual bytes transferred
+		 */
+		pipe->pid_toggle = 0;
+		cvmx_usb_complete(usb, pipe, transaction,
+				  CVMX_USB_STATUS_STALL);
+	} else if (usbc_hcint.s.xacterr) {
+		/*
+		 * XactErr as a response means the device signaled
+		 * something wrong with the transfer. For example, PID
+		 * toggle errors cause these.
+		 */
+		cvmx_usb_complete(usb, pipe, transaction,
+				  CVMX_USB_STATUS_XACTERR);
+	} else if (usbc_hcint.s.bblerr) {
+		/* Babble Error (BblErr) */
+		cvmx_usb_complete(usb, pipe, transaction,
+				  CVMX_USB_STATUS_BABBLEERR);
+	} else if (usbc_hcint.s.datatglerr) {
+		/* Data toggle error */
+		cvmx_usb_complete(usb, pipe, transaction,
+				  CVMX_USB_STATUS_DATATGLERR);
+	} else if (usbc_hcint.s.nyet) {
+		/*
+		 * NYET as a response is only allowed in three cases: as a
+		 * response to a ping, as a response to a split transaction, and
+		 * as a response to a bulk out. The ping case is handled by
+		 * hardware, so we only have splits and bulk out
+		 */
+		if (!cvmx_usb_pipe_needs_split(usb, pipe)) {
+			transaction->retries = 0;
+			/*
+			 * If there is more data to go then we need to try
+			 * again. Otherwise this transaction is complete
+			 */
+			if ((buffer_space_left == 0) ||
+			    (bytes_in_last_packet < pipe->max_packet))
+				cvmx_usb_complete(usb, pipe,
+						  transaction,
+						  CVMX_USB_STATUS_OK);
+		} else {
+			/*
+			 * Split transactions retry the split complete 4 times
+			 * then rewind to the start split and do the entire
+			 * transactions again
+			 */
+			transaction->retries++;
+			if ((transaction->retries & 0x3) == 0) {
+				/*
+				 * Rewind to the beginning of the transaction by
+				 * anding off the split complete bit
+				 */
+				transaction->stage &= ~1;
+				pipe->split_sc_frame = -1;
+			}
+		}
+	} else if (usbc_hcint.s.ack) {
+		transaction->retries = 0;
+		/*
+		 * The ACK bit can only be checked after the other error bits.
+		 * This is because a multi packet transfer may succeed in a
+		 * number of packets and then get a different response on the
+		 * last packet. In this case both ACK and the last response bit
+		 * will be set. If none of the other response bits is set, then
+		 * the last packet must have been an ACK
+		 *
+		 * Since we got an ACK, we know we don't need to do a ping on
+		 * this pipe
+		 */
+		pipe->flags &= ~CVMX_USB_PIPE_FLAGS_NEED_PING;
+
+		switch (transaction->type) {
+		case CVMX_USB_TRANSFER_CONTROL:
+			cvmx_usb_transfer_control(usb, pipe, transaction,
+						  usbc_hcchar,
+						  buffer_space_left,
+						  bytes_in_last_packet);
+			break;
+		case CVMX_USB_TRANSFER_BULK:
+			cvmx_usb_transfer_bulk(usb, pipe, transaction,
+					       usbc_hcint, buffer_space_left,
+					       bytes_in_last_packet);
+			break;
+		case CVMX_USB_TRANSFER_INTERRUPT:
+			cvmx_usb_transfer_intr(usb, pipe, transaction,
+					       buffer_space_left,
+					       bytes_in_last_packet);
+			break;
+		case CVMX_USB_TRANSFER_ISOCHRONOUS:
+			cvmx_usb_transfer_isoc(usb, pipe, transaction,
+					       buffer_space_left,
+					       bytes_in_last_packet,
+					       bytes_this_transfer);
+			break;
+		}
+	} else if (usbc_hcint.s.nak) {
+		/*
+		 * If this was a split then clear our split in progress marker.
+		 */
+		if (usb->active_split == transaction)
+			usb->active_split = NULL;
+		/*
+		 * NAK as a response means the device couldn't accept the
+		 * transaction, but it should be retried in the future. Rewind
+		 * to the beginning of the transaction by anding off the split
+		 * complete bit. Retry in the next interval
+		 */
+		transaction->retries = 0;
+		transaction->stage &= ~1;
+		pipe->next_tx_frame += pipe->interval;
+		if (pipe->next_tx_frame < usb->frame_number)
+			pipe->next_tx_frame = usb->frame_number +
+				pipe->interval -
+				(usb->frame_number - pipe->next_tx_frame) %
+				pipe->interval;
+	} else {
+		struct cvmx_usb_port_status port;
+
+		port = cvmx_usb_get_status(usb);
+		if (port.port_enabled) {
+			/* We'll retry the exact same transaction again */
+			transaction->retries++;
+		} else {
+			/*
+			 * We get channel halted interrupts with no result bits
+			 * sets when the cable is unplugged
+			 */
+			cvmx_usb_complete(usb, pipe, transaction,
+					  CVMX_USB_STATUS_ERROR);
+		}
+	}
+	return 0;
+}
+
+static void octeon_usb_port_callback(struct octeon_hcd *usb)
+{
+	spin_unlock(&usb->lock);
+	usb_hcd_poll_rh_status(octeon_to_hcd(usb));
+	spin_lock(&usb->lock);
+}
+
+/**
+ * Poll the USB block for status and call all needed callback
+ * handlers. This function is meant to be called in the interrupt
+ * handler for the USB controller. It can also be called
+ * periodically in a loop for non-interrupt based operation.
+ *
+ * @usb: USB device state populated by cvmx_usb_initialize().
+ *
+ * Returns: 0 or a negative error code.
+ */
+static int cvmx_usb_poll(struct octeon_hcd *usb)
+{
+	union cvmx_usbcx_hfnum usbc_hfnum;
+	union cvmx_usbcx_gintsts usbc_gintsts;
+
+	prefetch_range(usb, sizeof(*usb));
+
+	/* Update the frame counter */
+	usbc_hfnum.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index));
+	if ((usb->frame_number & 0x3fff) > usbc_hfnum.s.frnum)
+		usb->frame_number += 0x4000;
+	usb->frame_number &= ~0x3fffull;
+	usb->frame_number |= usbc_hfnum.s.frnum;
+
+	/* Read the pending interrupts */
+	usbc_gintsts.u32 = cvmx_usb_read_csr32(usb,
+					       CVMX_USBCX_GINTSTS(usb->index));
+
+	/* Clear the interrupts now that we know about them */
+	cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTSTS(usb->index),
+			     usbc_gintsts.u32);
+
+	if (usbc_gintsts.s.rxflvl) {
+		/*
+		 * RxFIFO Non-Empty (RxFLvl)
+		 * Indicates that there is at least one packet pending to be
+		 * read from the RxFIFO.
+		 *
+		 * In DMA mode this is handled by hardware
+		 */
+		if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+			cvmx_usb_poll_rx_fifo(usb);
+	}
+	if (usbc_gintsts.s.ptxfemp || usbc_gintsts.s.nptxfemp) {
+		/* Fill the Tx FIFOs when not in DMA mode */
+		if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+			cvmx_usb_poll_tx_fifo(usb);
+	}
+	if (usbc_gintsts.s.disconnint || usbc_gintsts.s.prtint) {
+		union cvmx_usbcx_hprt usbc_hprt;
+		/*
+		 * Disconnect Detected Interrupt (DisconnInt)
+		 * Asserted when a device disconnect is detected.
+		 *
+		 * Host Port Interrupt (PrtInt)
+		 * The core sets this bit to indicate a change in port status of
+		 * one of the O2P USB core ports in Host mode. The application
+		 * must read the Host Port Control and Status (HPRT) register to
+		 * determine the exact event that caused this interrupt. The
+		 * application must clear the appropriate status bit in the Host
+		 * Port Control and Status register to clear this bit.
+		 *
+		 * Call the user's port callback
+		 */
+		octeon_usb_port_callback(usb);
+		/* Clear the port change bits */
+		usbc_hprt.u32 =
+			cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
+		usbc_hprt.s.prtena = 0;
+		cvmx_usb_write_csr32(usb, CVMX_USBCX_HPRT(usb->index),
+				     usbc_hprt.u32);
+	}
+	if (usbc_gintsts.s.hchint) {
+		/*
+		 * Host Channels Interrupt (HChInt)
+		 * The core sets this bit to indicate that an interrupt is
+		 * pending on one of the channels of the core (in Host mode).
+		 * The application must read the Host All Channels Interrupt
+		 * (HAINT) register to determine the exact number of the channel
+		 * on which the interrupt occurred, and then read the
+		 * corresponding Host Channel-n Interrupt (HCINTn) register to
+		 * determine the exact cause of the interrupt. The application
+		 * must clear the appropriate status bit in the HCINTn register
+		 * to clear this bit.
+		 */
+		union cvmx_usbcx_haint usbc_haint;
+
+		usbc_haint.u32 = cvmx_usb_read_csr32(usb,
+						     CVMX_USBCX_HAINT(usb->index));
+		while (usbc_haint.u32) {
+			int channel;
+
+			channel = __fls(usbc_haint.u32);
+			cvmx_usb_poll_channel(usb, channel);
+			usbc_haint.u32 ^= 1 << channel;
+		}
+	}
+
+	cvmx_usb_schedule(usb, usbc_gintsts.s.sof);
+
+	return 0;
+}
+
+/* convert between an HCD pointer and the corresponding struct octeon_hcd */
+static inline struct octeon_hcd *hcd_to_octeon(struct usb_hcd *hcd)
+{
+	return (struct octeon_hcd *)(hcd->hcd_priv);
+}
+
+static irqreturn_t octeon_usb_irq(struct usb_hcd *hcd)
+{
+	struct octeon_hcd *usb = hcd_to_octeon(hcd);
+	unsigned long flags;
+
+	spin_lock_irqsave(&usb->lock, flags);
+	cvmx_usb_poll(usb);
+	spin_unlock_irqrestore(&usb->lock, flags);
+	return IRQ_HANDLED;
+}
+
+static int octeon_usb_start(struct usb_hcd *hcd)
+{
+	hcd->state = HC_STATE_RUNNING;
+	return 0;
+}
+
+static void octeon_usb_stop(struct usb_hcd *hcd)
+{
+	hcd->state = HC_STATE_HALT;
+}
+
+static int octeon_usb_get_frame_number(struct usb_hcd *hcd)
+{
+	struct octeon_hcd *usb = hcd_to_octeon(hcd);
+
+	return cvmx_usb_get_frame_number(usb);
+}
+
+static int octeon_usb_urb_enqueue(struct usb_hcd *hcd,
+				  struct urb *urb,
+				  gfp_t mem_flags)
+{
+	struct octeon_hcd *usb = hcd_to_octeon(hcd);
+	struct device *dev = hcd->self.controller;
+	struct cvmx_usb_transaction *transaction = NULL;
+	struct cvmx_usb_pipe *pipe;
+	unsigned long flags;
+	struct cvmx_usb_iso_packet *iso_packet;
+	struct usb_host_endpoint *ep = urb->ep;
+	int rc;
+
+	urb->status = 0;
+	spin_lock_irqsave(&usb->lock, flags);
+
+	rc = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (rc) {
+		spin_unlock_irqrestore(&usb->lock, flags);
+		return rc;
+	}
+
+	if (!ep->hcpriv) {
+		enum cvmx_usb_transfer transfer_type;
+		enum cvmx_usb_speed speed;
+		int split_device = 0;
+		int split_port = 0;
+
+		switch (usb_pipetype(urb->pipe)) {
+		case PIPE_ISOCHRONOUS:
+			transfer_type = CVMX_USB_TRANSFER_ISOCHRONOUS;
+			break;
+		case PIPE_INTERRUPT:
+			transfer_type = CVMX_USB_TRANSFER_INTERRUPT;
+			break;
+		case PIPE_CONTROL:
+			transfer_type = CVMX_USB_TRANSFER_CONTROL;
+			break;
+		default:
+			transfer_type = CVMX_USB_TRANSFER_BULK;
+			break;
+		}
+		switch (urb->dev->speed) {
+		case USB_SPEED_LOW:
+			speed = CVMX_USB_SPEED_LOW;
+			break;
+		case USB_SPEED_FULL:
+			speed = CVMX_USB_SPEED_FULL;
+			break;
+		default:
+			speed = CVMX_USB_SPEED_HIGH;
+			break;
+		}
+		/*
+		 * For slow devices on high speed ports we need to find the hub
+		 * that does the speed translation so we know where to send the
+		 * split transactions.
+		 */
+		if (speed != CVMX_USB_SPEED_HIGH) {
+			/*
+			 * Start at this device and work our way up the usb
+			 * tree.
+			 */
+			struct usb_device *dev = urb->dev;
+
+			while (dev->parent) {
+				/*
+				 * If our parent is high speed then he'll
+				 * receive the splits.
+				 */
+				if (dev->parent->speed == USB_SPEED_HIGH) {
+					split_device = dev->parent->devnum;
+					split_port = dev->portnum;
+					break;
+				}
+				/*
+				 * Move up the tree one level. If we make it all
+				 * the way up the tree, then the port must not
+				 * be in high speed mode and we don't need a
+				 * split.
+				 */
+				dev = dev->parent;
+			}
+		}
+		pipe = cvmx_usb_open_pipe(usb, usb_pipedevice(urb->pipe),
+					  usb_pipeendpoint(urb->pipe), speed,
+					  le16_to_cpu(ep->desc.wMaxPacketSize)
+					  & 0x7ff,
+					  transfer_type,
+					  usb_pipein(urb->pipe) ?
+						CVMX_USB_DIRECTION_IN :
+						CVMX_USB_DIRECTION_OUT,
+					  urb->interval,
+					  (le16_to_cpu(ep->desc.wMaxPacketSize)
+					   >> 11) & 0x3,
+					  split_device, split_port);
+		if (!pipe) {
+			usb_hcd_unlink_urb_from_ep(hcd, urb);
+			spin_unlock_irqrestore(&usb->lock, flags);
+			dev_dbg(dev, "Failed to create pipe\n");
+			return -ENOMEM;
+		}
+		ep->hcpriv = pipe;
+	} else {
+		pipe = ep->hcpriv;
+	}
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_ISOCHRONOUS:
+		dev_dbg(dev, "Submit isochronous to %d.%d\n",
+			usb_pipedevice(urb->pipe),
+			usb_pipeendpoint(urb->pipe));
+		/*
+		 * Allocate a structure to use for our private list of
+		 * isochronous packets.
+		 */
+		iso_packet = kmalloc_array(urb->number_of_packets,
+					   sizeof(struct cvmx_usb_iso_packet),
+					   GFP_ATOMIC);
+		if (iso_packet) {
+			int i;
+			/* Fill the list with the data from the URB */
+			for (i = 0; i < urb->number_of_packets; i++) {
+				iso_packet[i].offset =
+					urb->iso_frame_desc[i].offset;
+				iso_packet[i].length =
+					urb->iso_frame_desc[i].length;
+				iso_packet[i].status = CVMX_USB_STATUS_ERROR;
+			}
+			/*
+			 * Store a pointer to the list in the URB setup_packet
+			 * field. We know this currently isn't being used and
+			 * this saves us a bunch of logic.
+			 */
+			urb->setup_packet = (char *)iso_packet;
+			transaction = cvmx_usb_submit_isochronous(usb,
+								  pipe, urb);
+			/*
+			 * If submit failed we need to free our private packet
+			 * list.
+			 */
+			if (!transaction) {
+				urb->setup_packet = NULL;
+				kfree(iso_packet);
+			}
+		}
+		break;
+	case PIPE_INTERRUPT:
+		dev_dbg(dev, "Submit interrupt to %d.%d\n",
+			usb_pipedevice(urb->pipe),
+			usb_pipeendpoint(urb->pipe));
+		transaction = cvmx_usb_submit_interrupt(usb, pipe, urb);
+		break;
+	case PIPE_CONTROL:
+		dev_dbg(dev, "Submit control to %d.%d\n",
+			usb_pipedevice(urb->pipe),
+			usb_pipeendpoint(urb->pipe));
+		transaction = cvmx_usb_submit_control(usb, pipe, urb);
+		break;
+	case PIPE_BULK:
+		dev_dbg(dev, "Submit bulk to %d.%d\n",
+			usb_pipedevice(urb->pipe),
+			usb_pipeendpoint(urb->pipe));
+		transaction = cvmx_usb_submit_bulk(usb, pipe, urb);
+		break;
+	}
+	if (!transaction) {
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		spin_unlock_irqrestore(&usb->lock, flags);
+		dev_dbg(dev, "Failed to submit\n");
+		return -ENOMEM;
+	}
+	urb->hcpriv = transaction;
+	spin_unlock_irqrestore(&usb->lock, flags);
+	return 0;
+}
+
+static int octeon_usb_urb_dequeue(struct usb_hcd *hcd,
+				  struct urb *urb,
+				  int status)
+{
+	struct octeon_hcd *usb = hcd_to_octeon(hcd);
+	unsigned long flags;
+	int rc;
+
+	if (!urb->dev)
+		return -EINVAL;
+
+	spin_lock_irqsave(&usb->lock, flags);
+
+	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (rc)
+		goto out;
+
+	urb->status = status;
+	cvmx_usb_cancel(usb, urb->ep->hcpriv, urb->hcpriv);
+
+out:
+	spin_unlock_irqrestore(&usb->lock, flags);
+
+	return rc;
+}
+
+static void octeon_usb_endpoint_disable(struct usb_hcd *hcd,
+					struct usb_host_endpoint *ep)
+{
+	struct device *dev = hcd->self.controller;
+
+	if (ep->hcpriv) {
+		struct octeon_hcd *usb = hcd_to_octeon(hcd);
+		struct cvmx_usb_pipe *pipe = ep->hcpriv;
+		unsigned long flags;
+
+		spin_lock_irqsave(&usb->lock, flags);
+		cvmx_usb_cancel_all(usb, pipe);
+		if (cvmx_usb_close_pipe(usb, pipe))
+			dev_dbg(dev, "Closing pipe %p failed\n", pipe);
+		spin_unlock_irqrestore(&usb->lock, flags);
+		ep->hcpriv = NULL;
+	}
+}
+
+static int octeon_usb_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct octeon_hcd *usb = hcd_to_octeon(hcd);
+	struct cvmx_usb_port_status port_status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&usb->lock, flags);
+	port_status = cvmx_usb_get_status(usb);
+	spin_unlock_irqrestore(&usb->lock, flags);
+	buf[0] = port_status.connect_change << 1;
+
+	return buf[0] != 0;
+}
+
+static int octeon_usb_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+				  u16 wIndex, char *buf, u16 wLength)
+{
+	struct octeon_hcd *usb = hcd_to_octeon(hcd);
+	struct device *dev = hcd->self.controller;
+	struct cvmx_usb_port_status usb_port_status;
+	int port_status;
+	struct usb_hub_descriptor *desc;
+	unsigned long flags;
+
+	switch (typeReq) {
+	case ClearHubFeature:
+		dev_dbg(dev, "ClearHubFeature\n");
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* Nothing required here */
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case ClearPortFeature:
+		dev_dbg(dev, "ClearPortFeature\n");
+		if (wIndex != 1) {
+			dev_dbg(dev, " INVALID\n");
+			return -EINVAL;
+		}
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			dev_dbg(dev, " ENABLE\n");
+			spin_lock_irqsave(&usb->lock, flags);
+			cvmx_usb_disable(usb);
+			spin_unlock_irqrestore(&usb->lock, flags);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			dev_dbg(dev, " SUSPEND\n");
+			/* Not supported on Octeon */
+			break;
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(dev, " POWER\n");
+			/* Not supported on Octeon */
+			break;
+		case USB_PORT_FEAT_INDICATOR:
+			dev_dbg(dev, " INDICATOR\n");
+			/* Port inidicator not supported */
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			dev_dbg(dev, " C_CONNECTION\n");
+			/* Clears drivers internal connect status change flag */
+			spin_lock_irqsave(&usb->lock, flags);
+			usb->port_status = cvmx_usb_get_status(usb);
+			spin_unlock_irqrestore(&usb->lock, flags);
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			dev_dbg(dev, " C_RESET\n");
+			/*
+			 * Clears the driver's internal Port Reset Change flag.
+			 */
+			spin_lock_irqsave(&usb->lock, flags);
+			usb->port_status = cvmx_usb_get_status(usb);
+			spin_unlock_irqrestore(&usb->lock, flags);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			dev_dbg(dev, " C_ENABLE\n");
+			/*
+			 * Clears the driver's internal Port Enable/Disable
+			 * Change flag.
+			 */
+			spin_lock_irqsave(&usb->lock, flags);
+			usb->port_status = cvmx_usb_get_status(usb);
+			spin_unlock_irqrestore(&usb->lock, flags);
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			dev_dbg(dev, " C_SUSPEND\n");
+			/*
+			 * Clears the driver's internal Port Suspend Change
+			 * flag, which is set when resume signaling on the host
+			 * port is complete.
+			 */
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(dev, " C_OVER_CURRENT\n");
+			/* Clears the driver's overcurrent Change flag */
+			spin_lock_irqsave(&usb->lock, flags);
+			usb->port_status = cvmx_usb_get_status(usb);
+			spin_unlock_irqrestore(&usb->lock, flags);
+			break;
+		default:
+			dev_dbg(dev, " UNKNOWN\n");
+			return -EINVAL;
+		}
+		break;
+	case GetHubDescriptor:
+		dev_dbg(dev, "GetHubDescriptor\n");
+		desc = (struct usb_hub_descriptor *)buf;
+		desc->bDescLength = 9;
+		desc->bDescriptorType = 0x29;
+		desc->bNbrPorts = 1;
+		desc->wHubCharacteristics = cpu_to_le16(0x08);
+		desc->bPwrOn2PwrGood = 1;
+		desc->bHubContrCurrent = 0;
+		desc->u.hs.DeviceRemovable[0] = 0;
+		desc->u.hs.DeviceRemovable[1] = 0xff;
+		break;
+	case GetHubStatus:
+		dev_dbg(dev, "GetHubStatus\n");
+		*(__le32 *)buf = 0;
+		break;
+	case GetPortStatus:
+		dev_dbg(dev, "GetPortStatus\n");
+		if (wIndex != 1) {
+			dev_dbg(dev, " INVALID\n");
+			return -EINVAL;
+		}
+
+		spin_lock_irqsave(&usb->lock, flags);
+		usb_port_status = cvmx_usb_get_status(usb);
+		spin_unlock_irqrestore(&usb->lock, flags);
+		port_status = 0;
+
+		if (usb_port_status.connect_change) {
+			port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
+			dev_dbg(dev, " C_CONNECTION\n");
+		}
+
+		if (usb_port_status.port_enabled) {
+			port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
+			dev_dbg(dev, " C_ENABLE\n");
+		}
+
+		if (usb_port_status.connected) {
+			port_status |= (1 << USB_PORT_FEAT_CONNECTION);
+			dev_dbg(dev, " CONNECTION\n");
+		}
+
+		if (usb_port_status.port_enabled) {
+			port_status |= (1 << USB_PORT_FEAT_ENABLE);
+			dev_dbg(dev, " ENABLE\n");
+		}
+
+		if (usb_port_status.port_over_current) {
+			port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
+			dev_dbg(dev, " OVER_CURRENT\n");
+		}
+
+		if (usb_port_status.port_powered) {
+			port_status |= (1 << USB_PORT_FEAT_POWER);
+			dev_dbg(dev, " POWER\n");
+		}
+
+		if (usb_port_status.port_speed == CVMX_USB_SPEED_HIGH) {
+			port_status |= USB_PORT_STAT_HIGH_SPEED;
+			dev_dbg(dev, " HIGHSPEED\n");
+		} else if (usb_port_status.port_speed == CVMX_USB_SPEED_LOW) {
+			port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
+			dev_dbg(dev, " LOWSPEED\n");
+		}
+
+		*((__le32 *)buf) = cpu_to_le32(port_status);
+		break;
+	case SetHubFeature:
+		dev_dbg(dev, "SetHubFeature\n");
+		/* No HUB features supported */
+		break;
+	case SetPortFeature:
+		dev_dbg(dev, "SetPortFeature\n");
+		if (wIndex != 1) {
+			dev_dbg(dev, " INVALID\n");
+			return -EINVAL;
+		}
+
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			dev_dbg(dev, " SUSPEND\n");
+			return -EINVAL;
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(dev, " POWER\n");
+			/*
+			 * Program the port power bit to drive VBUS on the USB.
+			 */
+			spin_lock_irqsave(&usb->lock, flags);
+			USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index),
+					cvmx_usbcx_hprt, prtpwr, 1);
+			spin_unlock_irqrestore(&usb->lock, flags);
+			return 0;
+		case USB_PORT_FEAT_RESET:
+			dev_dbg(dev, " RESET\n");
+			spin_lock_irqsave(&usb->lock, flags);
+			cvmx_usb_reset_port(usb);
+			spin_unlock_irqrestore(&usb->lock, flags);
+			return 0;
+		case USB_PORT_FEAT_INDICATOR:
+			dev_dbg(dev, " INDICATOR\n");
+			/* Not supported */
+			break;
+		default:
+			dev_dbg(dev, " UNKNOWN\n");
+			return -EINVAL;
+		}
+		break;
+	default:
+		dev_dbg(dev, "Unknown root hub request\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static const struct hc_driver octeon_hc_driver = {
+	.description		= "Octeon USB",
+	.product_desc		= "Octeon Host Controller",
+	.hcd_priv_size		= sizeof(struct octeon_hcd),
+	.irq			= octeon_usb_irq,
+	.flags			= HCD_MEMORY | HCD_DMA | HCD_USB2,
+	.start			= octeon_usb_start,
+	.stop			= octeon_usb_stop,
+	.urb_enqueue		= octeon_usb_urb_enqueue,
+	.urb_dequeue		= octeon_usb_urb_dequeue,
+	.endpoint_disable	= octeon_usb_endpoint_disable,
+	.get_frame_number	= octeon_usb_get_frame_number,
+	.hub_status_data	= octeon_usb_hub_status_data,
+	.hub_control		= octeon_usb_hub_control,
+	.map_urb_for_dma	= octeon_map_urb_for_dma,
+	.unmap_urb_for_dma	= octeon_unmap_urb_for_dma,
+};
+
+static int octeon_usb_probe(struct platform_device *pdev)
+{
+	int status;
+	int initialize_flags;
+	int usb_num;
+	struct resource *res_mem;
+	struct device_node *usbn_node;
+	int irq = platform_get_irq(pdev, 0);
+	struct device *dev = &pdev->dev;
+	struct octeon_hcd *usb;
+	struct usb_hcd *hcd;
+	u32 clock_rate = 48000000;
+	bool is_crystal_clock = false;
+	const char *clock_type;
+	int i;
+
+	if (!dev->of_node) {
+		dev_err(dev, "Error: empty of_node\n");
+		return -ENXIO;
+	}
+	usbn_node = dev->of_node->parent;
+
+	i = of_property_read_u32(usbn_node,
+				 "clock-frequency", &clock_rate);
+	if (i)
+		i = of_property_read_u32(usbn_node,
+					 "refclk-frequency", &clock_rate);
+	if (i) {
+		dev_err(dev, "No USBN \"clock-frequency\"\n");
+		return -ENXIO;
+	}
+	switch (clock_rate) {
+	case 12000000:
+		initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
+		break;
+	case 24000000:
+		initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
+		break;
+	case 48000000:
+		initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
+		break;
+	default:
+		dev_err(dev, "Illegal USBN \"clock-frequency\" %u\n",
+			clock_rate);
+		return -ENXIO;
+	}
+
+	i = of_property_read_string(usbn_node,
+				    "cavium,refclk-type", &clock_type);
+	if (i)
+		i = of_property_read_string(usbn_node,
+					    "refclk-type", &clock_type);
+
+	if (!i && strcmp("crystal", clock_type) == 0)
+		is_crystal_clock = true;
+
+	if (is_crystal_clock)
+		initialize_flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI;
+	else
+		initialize_flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res_mem) {
+		dev_err(dev, "found no memory resource\n");
+		return -ENXIO;
+	}
+	usb_num = (res_mem->start >> 44) & 1;
+
+	if (irq < 0) {
+		/* Defective device tree, but we know how to fix it. */
+		irq_hw_number_t hwirq = usb_num ? (1 << 6) + 17 : 56;
+
+		irq = irq_create_mapping(NULL, hwirq);
+	}
+
+	/*
+	 * Set the DMA mask to 64bits so we get buffers already translated for
+	 * DMA.
+	 */
+	i = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(64));
+	if (i)
+		return i;
+
+	/*
+	 * Only cn52XX and cn56XX have DWC_OTG USB hardware and the
+	 * IOB priority registers.  Under heavy network load USB
+	 * hardware can be starved by the IOB causing a crash.  Give
+	 * it a priority boost if it has been waiting more than 400
+	 * cycles to avoid this situation.
+	 *
+	 * Testing indicates that a cnt_val of 8192 is not sufficient,
+	 * but no failures are seen with 4096.  We choose a value of
+	 * 400 to give a safety factor of 10.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
+		union cvmx_iob_n2c_l2c_pri_cnt pri_cnt;
+
+		pri_cnt.u64 = 0;
+		pri_cnt.s.cnt_enb = 1;
+		pri_cnt.s.cnt_val = 400;
+		cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
+	}
+
+	hcd = usb_create_hcd(&octeon_hc_driver, dev, dev_name(dev));
+	if (!hcd) {
+		dev_dbg(dev, "Failed to allocate memory for HCD\n");
+		return -1;
+	}
+	hcd->uses_new_polling = 1;
+	usb = (struct octeon_hcd *)hcd->hcd_priv;
+
+	spin_lock_init(&usb->lock);
+
+	usb->init_flags = initialize_flags;
+
+	/* Initialize the USB state structure */
+	usb->index = usb_num;
+	INIT_LIST_HEAD(&usb->idle_pipes);
+	for (i = 0; i < ARRAY_SIZE(usb->active_pipes); i++)
+		INIT_LIST_HEAD(&usb->active_pipes[i]);
+
+	/* Due to an errata, CN31XX doesn't support DMA */
+	if (OCTEON_IS_MODEL(OCTEON_CN31XX)) {
+		usb->init_flags |= CVMX_USB_INITIALIZE_FLAGS_NO_DMA;
+		/* Only use one channel with non DMA */
+		usb->idle_hardware_channels = 0x1;
+	} else if (OCTEON_IS_MODEL(OCTEON_CN5XXX)) {
+		/* CN5XXX have an errata with channel 3 */
+		usb->idle_hardware_channels = 0xf7;
+	} else {
+		usb->idle_hardware_channels = 0xff;
+	}
+
+	status = cvmx_usb_initialize(dev, usb);
+	if (status) {
+		dev_dbg(dev, "USB initialization failed with %d\n", status);
+		usb_put_hcd(hcd);
+		return -1;
+	}
+
+	status = usb_add_hcd(hcd, irq, 0);
+	if (status) {
+		dev_dbg(dev, "USB add HCD failed with %d\n", status);
+		usb_put_hcd(hcd);
+		return -1;
+	}
+	device_wakeup_enable(hcd->self.controller);
+
+	dev_info(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq);
+
+	return 0;
+}
+
+static int octeon_usb_remove(struct platform_device *pdev)
+{
+	int status;
+	struct device *dev = &pdev->dev;
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct octeon_hcd *usb = hcd_to_octeon(hcd);
+	unsigned long flags;
+
+	usb_remove_hcd(hcd);
+	spin_lock_irqsave(&usb->lock, flags);
+	status = cvmx_usb_shutdown(usb);
+	spin_unlock_irqrestore(&usb->lock, flags);
+	if (status)
+		dev_dbg(dev, "USB shutdown failed with %d\n", status);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+static const struct of_device_id octeon_usb_match[] = {
+	{
+		.compatible = "cavium,octeon-5750-usbc",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, octeon_usb_match);
+
+static struct platform_driver octeon_usb_driver = {
+	.driver = {
+		.name		= "octeon-hcd",
+		.of_match_table = octeon_usb_match,
+	},
+	.probe      = octeon_usb_probe,
+	.remove     = octeon_usb_remove,
+};
+
+static int __init octeon_usb_driver_init(void)
+{
+	if (usb_disabled())
+		return 0;
+
+	return platform_driver_register(&octeon_usb_driver);
+}
+module_init(octeon_usb_driver_init);
+
+static void __exit octeon_usb_driver_exit(void)
+{
+	if (usb_disabled())
+		return;
+
+	platform_driver_unregister(&octeon_usb_driver);
+}
+module_exit(octeon_usb_driver_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cavium, Inc. <support@cavium.com>");
+MODULE_DESCRIPTION("Cavium Inc. OCTEON USB Host driver.");
diff --git a/drivers/usb/host/octeon-hcd.h b/drivers/usb/host/octeon-hcd.h
new file mode 100644
index 000000000..9ed619c93
--- /dev/null
+++ b/drivers/usb/host/octeon-hcd.h
@@ -0,0 +1,1847 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Octeon HCD hardware register definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Some parts of the code were originally released under BSD license:
+ *
+ * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
+ * reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *
+ *   * Redistributions in binary form must reproduce the above
+ *     copyright notice, this list of conditions and the following
+ *     disclaimer in the documentation and/or other materials provided
+ *     with the distribution.
+ *
+ *   * Neither the name of Cavium Networks nor the names of
+ *     its contributors may be used to endorse or promote products
+ *     derived from this software without specific prior written
+ *     permission.
+ *
+ * This Software, including technical data, may be subject to U.S. export
+ * control laws, including the U.S. Export Administration Act and its associated
+ * regulations, and may be subject to export or import regulations in other
+ * countries.
+ *
+ * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
+ * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
+ * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
+ * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION
+ * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
+ * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
+ * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
+ * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+ * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
+ * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
+ */
+
+#ifndef __OCTEON_HCD_H__
+#define __OCTEON_HCD_H__
+
+#include <asm/bitfield.h>
+
+#define CVMX_USBCXBASE 0x00016F0010000000ull
+#define CVMX_USBCXREG1(reg, bid) \
+	(CVMX_ADD_IO_SEG(CVMX_USBCXBASE | reg) + \
+	 ((bid) & 1) * 0x100000000000ull)
+#define CVMX_USBCXREG2(reg, bid, off) \
+	(CVMX_ADD_IO_SEG(CVMX_USBCXBASE | reg) + \
+	 (((off) & 7) + ((bid) & 1) * 0x8000000000ull) * 32)
+
+#define CVMX_USBCX_GAHBCFG(bid)		CVMX_USBCXREG1(0x008, bid)
+#define CVMX_USBCX_GHWCFG3(bid)		CVMX_USBCXREG1(0x04c, bid)
+#define CVMX_USBCX_GINTMSK(bid)		CVMX_USBCXREG1(0x018, bid)
+#define CVMX_USBCX_GINTSTS(bid)		CVMX_USBCXREG1(0x014, bid)
+#define CVMX_USBCX_GNPTXFSIZ(bid)	CVMX_USBCXREG1(0x028, bid)
+#define CVMX_USBCX_GNPTXSTS(bid)	CVMX_USBCXREG1(0x02c, bid)
+#define CVMX_USBCX_GOTGCTL(bid)		CVMX_USBCXREG1(0x000, bid)
+#define CVMX_USBCX_GRSTCTL(bid)		CVMX_USBCXREG1(0x010, bid)
+#define CVMX_USBCX_GRXFSIZ(bid)		CVMX_USBCXREG1(0x024, bid)
+#define CVMX_USBCX_GRXSTSPH(bid)	CVMX_USBCXREG1(0x020, bid)
+#define CVMX_USBCX_GUSBCFG(bid)		CVMX_USBCXREG1(0x00c, bid)
+#define CVMX_USBCX_HAINT(bid)		CVMX_USBCXREG1(0x414, bid)
+#define CVMX_USBCX_HAINTMSK(bid)	CVMX_USBCXREG1(0x418, bid)
+#define CVMX_USBCX_HCCHARX(off, bid)	CVMX_USBCXREG2(0x500, bid, off)
+#define CVMX_USBCX_HCFG(bid)		CVMX_USBCXREG1(0x400, bid)
+#define CVMX_USBCX_HCINTMSKX(off, bid)	CVMX_USBCXREG2(0x50c, bid, off)
+#define CVMX_USBCX_HCINTX(off, bid)	CVMX_USBCXREG2(0x508, bid, off)
+#define CVMX_USBCX_HCSPLTX(off, bid)	CVMX_USBCXREG2(0x504, bid, off)
+#define CVMX_USBCX_HCTSIZX(off, bid)	CVMX_USBCXREG2(0x510, bid, off)
+#define CVMX_USBCX_HFIR(bid)		CVMX_USBCXREG1(0x404, bid)
+#define CVMX_USBCX_HFNUM(bid)		CVMX_USBCXREG1(0x408, bid)
+#define CVMX_USBCX_HPRT(bid)		CVMX_USBCXREG1(0x440, bid)
+#define CVMX_USBCX_HPTXFSIZ(bid)	CVMX_USBCXREG1(0x100, bid)
+#define CVMX_USBCX_HPTXSTS(bid)		CVMX_USBCXREG1(0x410, bid)
+
+#define CVMX_USBNXBID1(bid) (((bid) & 1) * 0x10000000ull)
+#define CVMX_USBNXBID2(bid) (((bid) & 1) * 0x100000000000ull)
+
+#define CVMX_USBNXREG1(reg, bid) \
+	(CVMX_ADD_IO_SEG(0x0001180068000000ull | reg) + CVMX_USBNXBID1(bid))
+#define CVMX_USBNXREG2(reg, bid) \
+	(CVMX_ADD_IO_SEG(0x00016F0000000000ull | reg) + CVMX_USBNXBID2(bid))
+
+#define CVMX_USBNX_CLK_CTL(bid)		CVMX_USBNXREG1(0x10, bid)
+#define CVMX_USBNX_DMA0_INB_CHN0(bid)	CVMX_USBNXREG2(0x818, bid)
+#define CVMX_USBNX_DMA0_OUTB_CHN0(bid)	CVMX_USBNXREG2(0x858, bid)
+#define CVMX_USBNX_USBP_CTL_STATUS(bid)	CVMX_USBNXREG1(0x18, bid)
+
+/**
+ * cvmx_usbc#_gahbcfg
+ *
+ * Core AHB Configuration Register (GAHBCFG)
+ *
+ * This register can be used to configure the core after power-on or a change in
+ * mode of operation. This register mainly contains AHB system-related
+ * configuration parameters. The AHB is the processor interface to the O2P USB
+ * core. In general, software need not know about this interface except to
+ * program the values as specified.
+ *
+ * The application must program this register as part of the O2P USB core
+ * initialization. Do not change this register after the initial programming.
+ */
+union cvmx_usbcx_gahbcfg {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_gahbcfg_s
+	 * @ptxfemplvl: Periodic TxFIFO Empty Level (PTxFEmpLvl)
+	 *	Software should set this bit to 0x1.
+	 *	Indicates when the Periodic TxFIFO Empty Interrupt bit in the
+	 *	Core Interrupt register (GINTSTS.PTxFEmp) is triggered. This
+	 *	bit is used only in Slave mode.
+	 *	* 1'b0: GINTSTS.PTxFEmp interrupt indicates that the Periodic
+	 *	TxFIFO is half empty
+	 *	* 1'b1: GINTSTS.PTxFEmp interrupt indicates that the Periodic
+	 *	TxFIFO is completely empty
+	 * @nptxfemplvl: Non-Periodic TxFIFO Empty Level (NPTxFEmpLvl)
+	 *	Software should set this bit to 0x1.
+	 *	Indicates when the Non-Periodic TxFIFO Empty Interrupt bit in
+	 *	the Core Interrupt register (GINTSTS.NPTxFEmp) is triggered.
+	 *	This bit is used only in Slave mode.
+	 *	* 1'b0: GINTSTS.NPTxFEmp interrupt indicates that the Non-
+	 *	Periodic TxFIFO is half empty
+	 *	* 1'b1: GINTSTS.NPTxFEmp interrupt indicates that the Non-
+	 *	Periodic TxFIFO is completely empty
+	 * @dmaen: DMA Enable (DMAEn)
+	 *	* 1'b0: Core operates in Slave mode
+	 *	* 1'b1: Core operates in a DMA mode
+	 * @hbstlen: Burst Length/Type (HBstLen)
+	 *	This field has not effect and should be left as 0x0.
+	 * @glblintrmsk: Global Interrupt Mask (GlblIntrMsk)
+	 *	Software should set this field to 0x1.
+	 *	The application uses this bit to mask or unmask the interrupt
+	 *	line assertion to itself. Irrespective of this bit's setting,
+	 *	the interrupt status registers are updated by the core.
+	 *	* 1'b0: Mask the interrupt assertion to the application.
+	 *	* 1'b1: Unmask the interrupt assertion to the application.
+	 */
+	struct cvmx_usbcx_gahbcfg_s {
+		__BITFIELD_FIELD(u32 reserved_9_31	: 23,
+		__BITFIELD_FIELD(u32 ptxfemplvl		: 1,
+		__BITFIELD_FIELD(u32 nptxfemplvl	: 1,
+		__BITFIELD_FIELD(u32 reserved_6_6	: 1,
+		__BITFIELD_FIELD(u32 dmaen		: 1,
+		__BITFIELD_FIELD(u32 hbstlen		: 4,
+		__BITFIELD_FIELD(u32 glblintrmsk	: 1,
+		;)))))))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_ghwcfg3
+ *
+ * User HW Config3 Register (GHWCFG3)
+ *
+ * This register contains the configuration options of the O2P USB core.
+ */
+union cvmx_usbcx_ghwcfg3 {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_ghwcfg3_s
+	 * @dfifodepth: DFIFO Depth (DfifoDepth)
+	 *	This value is in terms of 32-bit words.
+	 *	* Minimum value is 32
+	 *	* Maximum value is 32768
+	 * @ahbphysync: AHB and PHY Synchronous (AhbPhySync)
+	 *	Indicates whether AHB and PHY clocks are synchronous to
+	 *	each other.
+	 *	* 1'b0: No
+	 *	* 1'b1: Yes
+	 *	This bit is tied to 1.
+	 * @rsttype: Reset Style for Clocked always Blocks in RTL (RstType)
+	 *	* 1'b0: Asynchronous reset is used in the core
+	 *	* 1'b1: Synchronous reset is used in the core
+	 * @optfeature: Optional Features Removed (OptFeature)
+	 *	Indicates whether the User ID register, GPIO interface ports,
+	 *	and SOF toggle and counter ports were removed for gate count
+	 *	optimization.
+	 * @vendor_control_interface_support: Vendor Control Interface Support
+	 *	* 1'b0: Vendor Control Interface is not available on the core.
+	 *	* 1'b1: Vendor Control Interface is available.
+	 * @i2c_selection: I2C Selection
+	 *	* 1'b0: I2C Interface is not available on the core.
+	 *	* 1'b1: I2C Interface is available on the core.
+	 * @otgen: OTG Function Enabled (OtgEn)
+	 *	The application uses this bit to indicate the O2P USB core's
+	 *	OTG capabilities.
+	 *	* 1'b0: Not OTG capable
+	 *	* 1'b1: OTG Capable
+	 * @pktsizewidth: Width of Packet Size Counters (PktSizeWidth)
+	 *	* 3'b000: 4 bits
+	 *	* 3'b001: 5 bits
+	 *	* 3'b010: 6 bits
+	 *	* 3'b011: 7 bits
+	 *	* 3'b100: 8 bits
+	 *	* 3'b101: 9 bits
+	 *	* 3'b110: 10 bits
+	 *	* Others: Reserved
+	 * @xfersizewidth: Width of Transfer Size Counters (XferSizeWidth)
+	 *	* 4'b0000: 11 bits
+	 *	* 4'b0001: 12 bits
+	 *	- ...
+	 *	* 4'b1000: 19 bits
+	 *	* Others: Reserved
+	 */
+	struct cvmx_usbcx_ghwcfg3_s {
+		__BITFIELD_FIELD(u32 dfifodepth				: 16,
+		__BITFIELD_FIELD(u32 reserved_13_15			: 3,
+		__BITFIELD_FIELD(u32 ahbphysync				: 1,
+		__BITFIELD_FIELD(u32 rsttype				: 1,
+		__BITFIELD_FIELD(u32 optfeature				: 1,
+		__BITFIELD_FIELD(u32 vendor_control_interface_support	: 1,
+		__BITFIELD_FIELD(u32 i2c_selection			: 1,
+		__BITFIELD_FIELD(u32 otgen				: 1,
+		__BITFIELD_FIELD(u32 pktsizewidth			: 3,
+		__BITFIELD_FIELD(u32 xfersizewidth			: 4,
+		;))))))))))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_gintmsk
+ *
+ * Core Interrupt Mask Register (GINTMSK)
+ *
+ * This register works with the Core Interrupt register to interrupt the
+ * application. When an interrupt bit is masked, the interrupt associated with
+ * that bit will not be generated. However, the Core Interrupt (GINTSTS)
+ * register bit corresponding to that interrupt will still be set.
+ * Mask interrupt: 1'b0, Unmask interrupt: 1'b1
+ */
+union cvmx_usbcx_gintmsk {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_gintmsk_s
+	 * @wkupintmsk: Resume/Remote Wakeup Detected Interrupt Mask
+	 *	(WkUpIntMsk)
+	 * @sessreqintmsk: Session Request/New Session Detected Interrupt Mask
+	 *	(SessReqIntMsk)
+	 * @disconnintmsk: Disconnect Detected Interrupt Mask (DisconnIntMsk)
+	 * @conidstschngmsk: Connector ID Status Change Mask (ConIDStsChngMsk)
+	 * @ptxfempmsk: Periodic TxFIFO Empty Mask (PTxFEmpMsk)
+	 * @hchintmsk: Host Channels Interrupt Mask (HChIntMsk)
+	 * @prtintmsk: Host Port Interrupt Mask (PrtIntMsk)
+	 * @fetsuspmsk: Data Fetch Suspended Mask (FetSuspMsk)
+	 * @incomplpmsk: Incomplete Periodic Transfer Mask (incomplPMsk)
+	 *	Incomplete Isochronous OUT Transfer Mask
+	 *	(incompISOOUTMsk)
+	 * @incompisoinmsk: Incomplete Isochronous IN Transfer Mask
+	 *		    (incompISOINMsk)
+	 * @oepintmsk: OUT Endpoints Interrupt Mask (OEPIntMsk)
+	 * @inepintmsk: IN Endpoints Interrupt Mask (INEPIntMsk)
+	 * @epmismsk: Endpoint Mismatch Interrupt Mask (EPMisMsk)
+	 * @eopfmsk: End of Periodic Frame Interrupt Mask (EOPFMsk)
+	 * @isooutdropmsk: Isochronous OUT Packet Dropped Interrupt Mask
+	 *	(ISOOutDropMsk)
+	 * @enumdonemsk: Enumeration Done Mask (EnumDoneMsk)
+	 * @usbrstmsk: USB Reset Mask (USBRstMsk)
+	 * @usbsuspmsk: USB Suspend Mask (USBSuspMsk)
+	 * @erlysuspmsk: Early Suspend Mask (ErlySuspMsk)
+	 * @i2cint: I2C Interrupt Mask (I2CINT)
+	 * @ulpickintmsk: ULPI Carkit Interrupt Mask (ULPICKINTMsk)
+	 *	I2C Carkit Interrupt Mask (I2CCKINTMsk)
+	 * @goutnakeffmsk: Global OUT NAK Effective Mask (GOUTNakEffMsk)
+	 * @ginnakeffmsk: Global Non-Periodic IN NAK Effective Mask
+	 *		  (GINNakEffMsk)
+	 * @nptxfempmsk: Non-Periodic TxFIFO Empty Mask (NPTxFEmpMsk)
+	 * @rxflvlmsk: Receive FIFO Non-Empty Mask (RxFLvlMsk)
+	 * @sofmsk: Start of (micro)Frame Mask (SofMsk)
+	 * @otgintmsk: OTG Interrupt Mask (OTGIntMsk)
+	 * @modemismsk: Mode Mismatch Interrupt Mask (ModeMisMsk)
+	 */
+	struct cvmx_usbcx_gintmsk_s {
+		__BITFIELD_FIELD(u32 wkupintmsk		: 1,
+		__BITFIELD_FIELD(u32 sessreqintmsk	: 1,
+		__BITFIELD_FIELD(u32 disconnintmsk	: 1,
+		__BITFIELD_FIELD(u32 conidstschngmsk	: 1,
+		__BITFIELD_FIELD(u32 reserved_27_27	: 1,
+		__BITFIELD_FIELD(u32 ptxfempmsk		: 1,
+		__BITFIELD_FIELD(u32 hchintmsk		: 1,
+		__BITFIELD_FIELD(u32 prtintmsk		: 1,
+		__BITFIELD_FIELD(u32 reserved_23_23	: 1,
+		__BITFIELD_FIELD(u32 fetsuspmsk		: 1,
+		__BITFIELD_FIELD(u32 incomplpmsk	: 1,
+		__BITFIELD_FIELD(u32 incompisoinmsk	: 1,
+		__BITFIELD_FIELD(u32 oepintmsk		: 1,
+		__BITFIELD_FIELD(u32 inepintmsk		: 1,
+		__BITFIELD_FIELD(u32 epmismsk		: 1,
+		__BITFIELD_FIELD(u32 reserved_16_16	: 1,
+		__BITFIELD_FIELD(u32 eopfmsk		: 1,
+		__BITFIELD_FIELD(u32 isooutdropmsk	: 1,
+		__BITFIELD_FIELD(u32 enumdonemsk	: 1,
+		__BITFIELD_FIELD(u32 usbrstmsk		: 1,
+		__BITFIELD_FIELD(u32 usbsuspmsk		: 1,
+		__BITFIELD_FIELD(u32 erlysuspmsk	: 1,
+		__BITFIELD_FIELD(u32 i2cint		: 1,
+		__BITFIELD_FIELD(u32 ulpickintmsk	: 1,
+		__BITFIELD_FIELD(u32 goutnakeffmsk	: 1,
+		__BITFIELD_FIELD(u32 ginnakeffmsk	: 1,
+		__BITFIELD_FIELD(u32 nptxfempmsk	: 1,
+		__BITFIELD_FIELD(u32 rxflvlmsk		: 1,
+		__BITFIELD_FIELD(u32 sofmsk		: 1,
+		__BITFIELD_FIELD(u32 otgintmsk		: 1,
+		__BITFIELD_FIELD(u32 modemismsk		: 1,
+		__BITFIELD_FIELD(u32 reserved_0_0	: 1,
+		;))))))))))))))))))))))))))))))))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_gintsts
+ *
+ * Core Interrupt Register (GINTSTS)
+ *
+ * This register interrupts the application for system-level events in the
+ * current mode of operation (Device mode or Host mode). It is shown in
+ * Interrupt. Some of the bits in this register are valid only in Host mode,
+ * while others are valid in Device mode only. This register also indicates the
+ * current mode of operation. In order to clear the interrupt status bits of
+ * type R_SS_WC, the application must write 1'b1 into the bit. The FIFO status
+ * interrupts are read only; once software reads from or writes to the FIFO
+ * while servicing these interrupts, FIFO interrupt conditions are cleared
+ * automatically.
+ */
+union cvmx_usbcx_gintsts {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_gintsts_s
+	 * @wkupint: Resume/Remote Wakeup Detected Interrupt (WkUpInt)
+	 *	In Device mode, this interrupt is asserted when a resume is
+	 *	detected on the USB. In Host mode, this interrupt is asserted
+	 *	when a remote wakeup is detected on the USB.
+	 *	For more information on how to use this interrupt, see "Partial
+	 *	Power-Down and Clock Gating Programming Model" on
+	 *	page 353.
+	 * @sessreqint: Session Request/New Session Detected Interrupt
+	 *		(SessReqInt)
+	 *	In Host mode, this interrupt is asserted when a session request
+	 *	is detected from the device. In Device mode, this interrupt is
+	 *	asserted when the utmiotg_bvalid signal goes high.
+	 *	For more information on how to use this interrupt, see "Partial
+	 *	Power-Down and Clock Gating Programming Model" on
+	 *	page 353.
+	 * @disconnint: Disconnect Detected Interrupt (DisconnInt)
+	 *	Asserted when a device disconnect is detected.
+	 * @conidstschng: Connector ID Status Change (ConIDStsChng)
+	 *	The core sets this bit when there is a change in connector ID
+	 *	status.
+	 * @ptxfemp: Periodic TxFIFO Empty (PTxFEmp)
+	 *	Asserted when the Periodic Transmit FIFO is either half or
+	 *	completely empty and there is space for at least one entry to be
+	 *	written in the Periodic Request Queue. The half or completely
+	 *	empty status is determined by the Periodic TxFIFO Empty Level
+	 *	bit in the Core AHB Configuration register
+	 *	(GAHBCFG.PTxFEmpLvl).
+	 * @hchint: Host Channels Interrupt (HChInt)
+	 *	The core sets this bit to indicate that an interrupt is pending
+	 *	on one of the channels of the core (in Host mode). The
+	 *	application must read the Host All Channels Interrupt (HAINT)
+	 *	register to determine the exact number of the channel on which
+	 *	the interrupt occurred, and then read the corresponding Host
+	 *	Channel-n Interrupt (HCINTn) register to determine the exact
+	 *	cause of the interrupt. The application must clear the
+	 *	appropriate status bit in the HCINTn register to clear this bit.
+	 * @prtint: Host Port Interrupt (PrtInt)
+	 *	The core sets this bit to indicate a change in port status of
+	 *	one of the O2P USB core ports in Host mode. The application must
+	 *	read the Host Port Control and Status (HPRT) register to
+	 *	determine the exact event that caused this interrupt. The
+	 *	application must clear the appropriate status bit in the Host
+	 *	Port Control and Status register to clear this bit.
+	 * @fetsusp: Data Fetch Suspended (FetSusp)
+	 *	This interrupt is valid only in DMA mode. This interrupt
+	 *	indicates that the core has stopped fetching data for IN
+	 *	endpoints due to the unavailability of TxFIFO space or Request
+	 *	Queue space. This interrupt is used by the application for an
+	 *	endpoint mismatch algorithm.
+	 * @incomplp: Incomplete Periodic Transfer (incomplP)
+	 *	In Host mode, the core sets this interrupt bit when there are
+	 *	incomplete periodic transactions still pending which are
+	 *	scheduled for the current microframe.
+	 *	Incomplete Isochronous OUT Transfer (incompISOOUT)
+	 *	The Device mode, the core sets this interrupt to indicate that
+	 *	there is at least one isochronous OUT endpoint on which the
+	 *	transfer is not completed in the current microframe. This
+	 *	interrupt is asserted along with the End of Periodic Frame
+	 *	Interrupt (EOPF) bit in this register.
+	 * @incompisoin: Incomplete Isochronous IN Transfer (incompISOIN)
+	 *	The core sets this interrupt to indicate that there is at least
+	 *	one isochronous IN endpoint on which the transfer is not
+	 *	completed in the current microframe. This interrupt is asserted
+	 *	along with the End of Periodic Frame Interrupt (EOPF) bit in
+	 *	this register.
+	 * @oepint: OUT Endpoints Interrupt (OEPInt)
+	 *	The core sets this bit to indicate that an interrupt is pending
+	 *	on one of the OUT endpoints of the core (in Device mode). The
+	 *	application must read the Device All Endpoints Interrupt
+	 *	(DAINT) register to determine the exact number of the OUT
+	 *	endpoint on which the interrupt occurred, and then read the
+	 *	corresponding Device OUT Endpoint-n Interrupt (DOEPINTn)
+	 *	register to determine the exact cause of the interrupt. The
+	 *	application must clear the appropriate status bit in the
+	 *	corresponding DOEPINTn register to clear this bit.
+	 * @iepint: IN Endpoints Interrupt (IEPInt)
+	 *	The core sets this bit to indicate that an interrupt is pending
+	 *	on one of the IN endpoints of the core (in Device mode). The
+	 *	application must read the Device All Endpoints Interrupt
+	 *	(DAINT) register to determine the exact number of the IN
+	 *	endpoint on which the interrupt occurred, and then read the
+	 *	corresponding Device IN Endpoint-n Interrupt (DIEPINTn)
+	 *	register to determine the exact cause of the interrupt. The
+	 *	application must clear the appropriate status bit in the
+	 *	corresponding DIEPINTn register to clear this bit.
+	 * @epmis: Endpoint Mismatch Interrupt (EPMis)
+	 *	Indicates that an IN token has been received for a non-periodic
+	 *	endpoint, but the data for another endpoint is present in the
+	 *	top of the Non-Periodic Transmit FIFO and the IN endpoint
+	 *	mismatch count programmed by the application has expired.
+	 * @eopf: End of Periodic Frame Interrupt (EOPF)
+	 *	Indicates that the period specified in the Periodic Frame
+	 *	Interval field of the Device Configuration register
+	 *	(DCFG.PerFrInt) has been reached in the current microframe.
+	 * @isooutdrop: Isochronous OUT Packet Dropped Interrupt (ISOOutDrop)
+	 *	The core sets this bit when it fails to write an isochronous OUT
+	 *	packet into the RxFIFO because the RxFIFO doesn't have
+	 *	enough space to accommodate a maximum packet size packet
+	 *	for the isochronous OUT endpoint.
+	 * @enumdone: Enumeration Done (EnumDone)
+	 *	The core sets this bit to indicate that speed enumeration is
+	 *	complete. The application must read the Device Status (DSTS)
+	 *	register to obtain the enumerated speed.
+	 * @usbrst: USB Reset (USBRst)
+	 *	The core sets this bit to indicate that a reset is detected on
+	 *	the USB.
+	 * @usbsusp: USB Suspend (USBSusp)
+	 *	The core sets this bit to indicate that a suspend was detected
+	 *	on the USB. The core enters the Suspended state when there
+	 *	is no activity on the phy_line_state_i signal for an extended
+	 *	period of time.
+	 * @erlysusp: Early Suspend (ErlySusp)
+	 *	The core sets this bit to indicate that an Idle state has been
+	 *	detected on the USB for 3 ms.
+	 * @i2cint: I2C Interrupt (I2CINT)
+	 *	This bit is always 0x0.
+	 * @ulpickint: ULPI Carkit Interrupt (ULPICKINT)
+	 *	This bit is always 0x0.
+	 * @goutnakeff: Global OUT NAK Effective (GOUTNakEff)
+	 *	Indicates that the Set Global OUT NAK bit in the Device Control
+	 *	register (DCTL.SGOUTNak), set by the application, has taken
+	 *	effect in the core. This bit can be cleared by writing the Clear
+	 *	Global OUT NAK bit in the Device Control register
+	 *	(DCTL.CGOUTNak).
+	 * @ginnakeff: Global IN Non-Periodic NAK Effective (GINNakEff)
+	 *	Indicates that the Set Global Non-Periodic IN NAK bit in the
+	 *	Device Control register (DCTL.SGNPInNak), set by the
+	 *	application, has taken effect in the core. That is, the core has
+	 *	sampled the Global IN NAK bit set by the application. This bit
+	 *	can be cleared by clearing the Clear Global Non-Periodic IN
+	 *	NAK bit in the Device Control register (DCTL.CGNPInNak).
+	 *	This interrupt does not necessarily mean that a NAK handshake
+	 *	is sent out on the USB. The STALL bit takes precedence over
+	 *	the NAK bit.
+	 * @nptxfemp: Non-Periodic TxFIFO Empty (NPTxFEmp)
+	 *	This interrupt is asserted when the Non-Periodic TxFIFO is
+	 *	either half or completely empty, and there is space for at least
+	 *	one entry to be written to the Non-Periodic Transmit Request
+	 *	Queue. The half or completely empty status is determined by
+	 *	the Non-Periodic TxFIFO Empty Level bit in the Core AHB
+	 *	Configuration register (GAHBCFG.NPTxFEmpLvl).
+	 * @rxflvl: RxFIFO Non-Empty (RxFLvl)
+	 *	Indicates that there is at least one packet pending to be read
+	 *	from the RxFIFO.
+	 * @sof: Start of (micro)Frame (Sof)
+	 *	In Host mode, the core sets this bit to indicate that an SOF
+	 *	(FS), micro-SOF (HS), or Keep-Alive (LS) is transmitted on the
+	 *	USB. The application must write a 1 to this bit to clear the
+	 *	interrupt.
+	 *	In Device mode, in the core sets this bit to indicate that an
+	 *	SOF token has been received on the USB. The application can read
+	 *	the Device Status register to get the current (micro)frame
+	 *	number. This interrupt is seen only when the core is operating
+	 *	at either HS or FS.
+	 * @otgint: OTG Interrupt (OTGInt)
+	 *	The core sets this bit to indicate an OTG protocol event. The
+	 *	application must read the OTG Interrupt Status (GOTGINT)
+	 *	register to determine the exact event that caused this
+	 *	interrupt. The application must clear the appropriate status bit
+	 *	in the GOTGINT register to clear this bit.
+	 * @modemis: Mode Mismatch Interrupt (ModeMis)
+	 *	The core sets this bit when the application is trying to access:
+	 *	* A Host mode register, when the core is operating in Device
+	 *	mode
+	 *	* A Device mode register, when the core is operating in Host
+	 *	mode
+	 *	The register access is completed on the AHB with an OKAY
+	 *	response, but is ignored by the core internally and doesn't
+	 *	affect the operation of the core.
+	 * @curmod: Current Mode of Operation (CurMod)
+	 *	Indicates the current mode of operation.
+	 *	* 1'b0: Device mode
+	 *	* 1'b1: Host mode
+	 */
+	struct cvmx_usbcx_gintsts_s {
+		__BITFIELD_FIELD(u32 wkupint		: 1,
+		__BITFIELD_FIELD(u32 sessreqint		: 1,
+		__BITFIELD_FIELD(u32 disconnint		: 1,
+		__BITFIELD_FIELD(u32 conidstschng	: 1,
+		__BITFIELD_FIELD(u32 reserved_27_27	: 1,
+		__BITFIELD_FIELD(u32 ptxfemp		: 1,
+		__BITFIELD_FIELD(u32 hchint		: 1,
+		__BITFIELD_FIELD(u32 prtint		: 1,
+		__BITFIELD_FIELD(u32 reserved_23_23	: 1,
+		__BITFIELD_FIELD(u32 fetsusp		: 1,
+		__BITFIELD_FIELD(u32 incomplp		: 1,
+		__BITFIELD_FIELD(u32 incompisoin	: 1,
+		__BITFIELD_FIELD(u32 oepint		: 1,
+		__BITFIELD_FIELD(u32 iepint		: 1,
+		__BITFIELD_FIELD(u32 epmis		: 1,
+		__BITFIELD_FIELD(u32 reserved_16_16	: 1,
+		__BITFIELD_FIELD(u32 eopf		: 1,
+		__BITFIELD_FIELD(u32 isooutdrop		: 1,
+		__BITFIELD_FIELD(u32 enumdone		: 1,
+		__BITFIELD_FIELD(u32 usbrst		: 1,
+		__BITFIELD_FIELD(u32 usbsusp		: 1,
+		__BITFIELD_FIELD(u32 erlysusp		: 1,
+		__BITFIELD_FIELD(u32 i2cint		: 1,
+		__BITFIELD_FIELD(u32 ulpickint		: 1,
+		__BITFIELD_FIELD(u32 goutnakeff		: 1,
+		__BITFIELD_FIELD(u32 ginnakeff		: 1,
+		__BITFIELD_FIELD(u32 nptxfemp		: 1,
+		__BITFIELD_FIELD(u32 rxflvl		: 1,
+		__BITFIELD_FIELD(u32 sof		: 1,
+		__BITFIELD_FIELD(u32 otgint		: 1,
+		__BITFIELD_FIELD(u32 modemis		: 1,
+		__BITFIELD_FIELD(u32 curmod		: 1,
+		;))))))))))))))))))))))))))))))))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_gnptxfsiz
+ *
+ * Non-Periodic Transmit FIFO Size Register (GNPTXFSIZ)
+ *
+ * The application can program the RAM size and the memory start address for the
+ * Non-Periodic TxFIFO.
+ */
+union cvmx_usbcx_gnptxfsiz {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_gnptxfsiz_s
+	 * @nptxfdep: Non-Periodic TxFIFO Depth (NPTxFDep)
+	 *	This value is in terms of 32-bit words.
+	 *	Minimum value is 16
+	 *	Maximum value is 32768
+	 * @nptxfstaddr: Non-Periodic Transmit RAM Start Address (NPTxFStAddr)
+	 *	This field contains the memory start address for Non-Periodic
+	 *	Transmit FIFO RAM.
+	 */
+	struct cvmx_usbcx_gnptxfsiz_s {
+		__BITFIELD_FIELD(u32 nptxfdep		: 16,
+		__BITFIELD_FIELD(u32 nptxfstaddr	: 16,
+		;))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_gnptxsts
+ *
+ * Non-Periodic Transmit FIFO/Queue Status Register (GNPTXSTS)
+ *
+ * This read-only register contains the free space information for the
+ * Non-Periodic TxFIFO and the Non-Periodic Transmit Request Queue.
+ */
+union cvmx_usbcx_gnptxsts {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_gnptxsts_s
+	 * @nptxqtop: Top of the Non-Periodic Transmit Request Queue (NPTxQTop)
+	 *	Entry in the Non-Periodic Tx Request Queue that is currently
+	 *	being processed by the MAC.
+	 *	* Bits [30:27]: Channel/endpoint number
+	 *	* Bits [26:25]:
+	 *	- 2'b00: IN/OUT token
+	 *	- 2'b01: Zero-length transmit packet (device IN/host OUT)
+	 *	- 2'b10: PING/CSPLIT token
+	 *	- 2'b11: Channel halt command
+	 *	* Bit [24]: Terminate (last entry for selected channel/endpoint)
+	 * @nptxqspcavail: Non-Periodic Transmit Request Queue Space Available
+	 *	(NPTxQSpcAvail)
+	 *	Indicates the amount of free space available in the Non-
+	 *	Periodic Transmit Request Queue. This queue holds both IN
+	 *	and OUT requests in Host mode. Device mode has only IN
+	 *	requests.
+	 *	* 8'h0: Non-Periodic Transmit Request Queue is full
+	 *	* 8'h1: 1 location available
+	 *	* 8'h2: 2 locations available
+	 *	* n: n locations available (0..8)
+	 *	* Others: Reserved
+	 * @nptxfspcavail: Non-Periodic TxFIFO Space Avail (NPTxFSpcAvail)
+	 *	Indicates the amount of free space available in the Non-
+	 *	Periodic TxFIFO.
+	 *	Values are in terms of 32-bit words.
+	 *	* 16'h0: Non-Periodic TxFIFO is full
+	 *	* 16'h1: 1 word available
+	 *	* 16'h2: 2 words available
+	 *	* 16'hn: n words available (where 0..32768)
+	 *	* 16'h8000: 32768 words available
+	 *	* Others: Reserved
+	 */
+	struct cvmx_usbcx_gnptxsts_s {
+		__BITFIELD_FIELD(u32 reserved_31_31	: 1,
+		__BITFIELD_FIELD(u32 nptxqtop		: 7,
+		__BITFIELD_FIELD(u32 nptxqspcavail	: 8,
+		__BITFIELD_FIELD(u32 nptxfspcavail	: 16,
+		;))))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_grstctl
+ *
+ * Core Reset Register (GRSTCTL)
+ *
+ * The application uses this register to reset various hardware features inside
+ * the core.
+ */
+union cvmx_usbcx_grstctl {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_grstctl_s
+	 * @ahbidle: AHB Master Idle (AHBIdle)
+	 *	Indicates that the AHB Master State Machine is in the IDLE
+	 *	condition.
+	 * @dmareq: DMA Request Signal (DMAReq)
+	 *	Indicates that the DMA request is in progress. Used for debug.
+	 * @txfnum: TxFIFO Number (TxFNum)
+	 *	This is the FIFO number that must be flushed using the TxFIFO
+	 *	Flush bit. This field must not be changed until the core clears
+	 *	the TxFIFO Flush bit.
+	 *	* 5'h0: Non-Periodic TxFIFO flush
+	 *	* 5'h1: Periodic TxFIFO 1 flush in Device mode or Periodic
+	 *	TxFIFO flush in Host mode
+	 *	* 5'h2: Periodic TxFIFO 2 flush in Device mode
+	 *	- ...
+	 *	* 5'hF: Periodic TxFIFO 15 flush in Device mode
+	 *	* 5'h10: Flush all the Periodic and Non-Periodic TxFIFOs in the
+	 *	core
+	 * @txfflsh: TxFIFO Flush (TxFFlsh)
+	 *	This bit selectively flushes a single or all transmit FIFOs, but
+	 *	cannot do so if the core is in the midst of a transaction.
+	 *	The application must only write this bit after checking that the
+	 *	core is neither writing to the TxFIFO nor reading from the
+	 *	TxFIFO.
+	 *	The application must wait until the core clears this bit before
+	 *	performing any operations. This bit takes 8 clocks (of phy_clk
+	 *	or hclk, whichever is slower) to clear.
+	 * @rxfflsh: RxFIFO Flush (RxFFlsh)
+	 *	The application can flush the entire RxFIFO using this bit, but
+	 *	must first ensure that the core is not in the middle of a
+	 *	transaction.
+	 *	The application must only write to this bit after checking that
+	 *	the core is neither reading from the RxFIFO nor writing to the
+	 *	RxFIFO.
+	 *	The application must wait until the bit is cleared before
+	 *	performing any other operations. This bit will take 8 clocks
+	 *	(slowest of PHY or AHB clock) to clear.
+	 * @intknqflsh: IN Token Sequence Learning Queue Flush (INTknQFlsh)
+	 *	The application writes this bit to flush the IN Token Sequence
+	 *	Learning Queue.
+	 * @frmcntrrst: Host Frame Counter Reset (FrmCntrRst)
+	 *	The application writes this bit to reset the (micro)frame number
+	 *	counter inside the core. When the (micro)frame counter is reset,
+	 *	the subsequent SOF sent out by the core will have a
+	 *	(micro)frame number of 0.
+	 * @hsftrst: HClk Soft Reset (HSftRst)
+	 *	The application uses this bit to flush the control logic in the
+	 *	AHB Clock domain. Only AHB Clock Domain pipelines are reset.
+	 *	* FIFOs are not flushed with this bit.
+	 *	* All state machines in the AHB clock domain are reset to the
+	 *	Idle state after terminating the transactions on the AHB,
+	 *	following the protocol.
+	 *	* CSR control bits used by the AHB clock domain state
+	 *	machines are cleared.
+	 *	* To clear this interrupt, status mask bits that control the
+	 *	interrupt status and are generated by the AHB clock domain
+	 *	state machine are cleared.
+	 *	* Because interrupt status bits are not cleared, the application
+	 *	can get the status of any core events that occurred after it set
+	 *	this bit.
+	 *	This is a self-clearing bit that the core clears after all
+	 *	necessary logic is reset in the core. This may take several
+	 *	clocks, depending on the core's current state.
+	 * @csftrst: Core Soft Reset (CSftRst)
+	 *	Resets the hclk and phy_clock domains as follows:
+	 *	* Clears the interrupts and all the CSR registers except the
+	 *	following register bits:
+	 *	- PCGCCTL.RstPdwnModule
+	 *	- PCGCCTL.GateHclk
+	 *	- PCGCCTL.PwrClmp
+	 *	- PCGCCTL.StopPPhyLPwrClkSelclk
+	 *	- GUSBCFG.PhyLPwrClkSel
+	 *	- GUSBCFG.DDRSel
+	 *	- GUSBCFG.PHYSel
+	 *	- GUSBCFG.FSIntf
+	 *	- GUSBCFG.ULPI_UTMI_Sel
+	 *	- GUSBCFG.PHYIf
+	 *	- HCFG.FSLSPclkSel
+	 *	- DCFG.DevSpd
+	 *	* All module state machines (except the AHB Slave Unit) are
+	 *	reset to the IDLE state, and all the transmit FIFOs and the
+	 *	receive FIFO are flushed.
+	 *	* Any transactions on the AHB Master are terminated as soon
+	 *	as possible, after gracefully completing the last data phase of
+	 *	an AHB transfer. Any transactions on the USB are terminated
+	 *	immediately.
+	 *	The application can write to this bit any time it wants to reset
+	 *	the core. This is a self-clearing bit and the core clears this
+	 *	bit after all the necessary logic is reset in the core, which
+	 *	may take several clocks, depending on the current state of the
+	 *	core. Once this bit is cleared software should wait at least 3
+	 *	PHY clocks before doing any access to the PHY domain
+	 *	(synchronization delay). Software should also should check that
+	 *	bit 31 of this register is 1 (AHB Master is IDLE) before
+	 *	starting any operation.
+	 *	Typically software reset is used during software development
+	 *	and also when you dynamically change the PHY selection bits
+	 *	in the USB configuration registers listed above. When you
+	 *	change the PHY, the corresponding clock for the PHY is
+	 *	selected and used in the PHY domain. Once a new clock is
+	 *	selected, the PHY domain has to be reset for proper operation.
+	 */
+	struct cvmx_usbcx_grstctl_s {
+		__BITFIELD_FIELD(u32 ahbidle		: 1,
+		__BITFIELD_FIELD(u32 dmareq		: 1,
+		__BITFIELD_FIELD(u32 reserved_11_29	: 19,
+		__BITFIELD_FIELD(u32 txfnum		: 5,
+		__BITFIELD_FIELD(u32 txfflsh		: 1,
+		__BITFIELD_FIELD(u32 rxfflsh		: 1,
+		__BITFIELD_FIELD(u32 intknqflsh		: 1,
+		__BITFIELD_FIELD(u32 frmcntrrst		: 1,
+		__BITFIELD_FIELD(u32 hsftrst		: 1,
+		__BITFIELD_FIELD(u32 csftrst		: 1,
+		;))))))))))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_grxfsiz
+ *
+ * Receive FIFO Size Register (GRXFSIZ)
+ *
+ * The application can program the RAM size that must be allocated to the
+ * RxFIFO.
+ */
+union cvmx_usbcx_grxfsiz {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_grxfsiz_s
+	 * @rxfdep: RxFIFO Depth (RxFDep)
+	 *	This value is in terms of 32-bit words.
+	 *	* Minimum value is 16
+	 *	* Maximum value is 32768
+	 */
+	struct cvmx_usbcx_grxfsiz_s {
+		__BITFIELD_FIELD(u32 reserved_16_31	: 16,
+		__BITFIELD_FIELD(u32 rxfdep		: 16,
+		;))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_grxstsph
+ *
+ * Receive Status Read and Pop Register, Host Mode (GRXSTSPH)
+ *
+ * A read to the Receive Status Read and Pop register returns and additionally
+ * pops the top data entry out of the RxFIFO.
+ * This Description is only valid when the core is in Host Mode. For Device Mode
+ * use USBC_GRXSTSPD instead.
+ * NOTE: GRXSTSPH and GRXSTSPD are physically the same register and share the
+ *	 same offset in the O2P USB core. The offset difference shown in this
+ *	 document is for software clarity and is actually ignored by the
+ *       hardware.
+ */
+union cvmx_usbcx_grxstsph {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_grxstsph_s
+	 * @pktsts: Packet Status (PktSts)
+	 *	Indicates the status of the received packet
+	 *	* 4'b0010: IN data packet received
+	 *	* 4'b0011: IN transfer completed (triggers an interrupt)
+	 *	* 4'b0101: Data toggle error (triggers an interrupt)
+	 *	* 4'b0111: Channel halted (triggers an interrupt)
+	 *	* Others: Reserved
+	 * @dpid: Data PID (DPID)
+	 *	* 2'b00: DATA0
+	 *	* 2'b10: DATA1
+	 *	* 2'b01: DATA2
+	 *	* 2'b11: MDATA
+	 * @bcnt: Byte Count (BCnt)
+	 *	Indicates the byte count of the received IN data packet
+	 * @chnum: Channel Number (ChNum)
+	 *	Indicates the channel number to which the current received
+	 *	packet belongs.
+	 */
+	struct cvmx_usbcx_grxstsph_s {
+		__BITFIELD_FIELD(u32 reserved_21_31	: 11,
+		__BITFIELD_FIELD(u32 pktsts		: 4,
+		__BITFIELD_FIELD(u32 dpid		: 2,
+		__BITFIELD_FIELD(u32 bcnt		: 11,
+		__BITFIELD_FIELD(u32 chnum		: 4,
+		;)))))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_gusbcfg
+ *
+ * Core USB Configuration Register (GUSBCFG)
+ *
+ * This register can be used to configure the core after power-on or a changing
+ * to Host mode or Device mode. It contains USB and USB-PHY related
+ * configuration parameters. The application must program this register before
+ * starting any transactions on either the AHB or the USB. Do not make changes
+ * to this register after the initial programming.
+ */
+union cvmx_usbcx_gusbcfg {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_gusbcfg_s
+	 * @otgi2csel: UTMIFS or I2C Interface Select (OtgI2CSel)
+	 *	This bit is always 0x0.
+	 * @phylpwrclksel: PHY Low-Power Clock Select (PhyLPwrClkSel)
+	 *	Software should set this bit to 0x0.
+	 *	Selects either 480-MHz or 48-MHz (low-power) PHY mode. In
+	 *	FS and LS modes, the PHY can usually operate on a 48-MHz
+	 *	clock to save power.
+	 *	* 1'b0: 480-MHz Internal PLL clock
+	 *	* 1'b1: 48-MHz External Clock
+	 *	In 480 MHz mode, the UTMI interface operates at either 60 or
+	 *	30-MHz, depending upon whether 8- or 16-bit data width is
+	 *	selected. In 48-MHz mode, the UTMI interface operates at 48
+	 *	MHz in FS mode and at either 48 or 6 MHz in LS mode
+	 *	(depending on the PHY vendor).
+	 *	This bit drives the utmi_fsls_low_power core output signal, and
+	 *	is valid only for UTMI+ PHYs.
+	 * @usbtrdtim: USB Turnaround Time (USBTrdTim)
+	 *	Sets the turnaround time in PHY clocks.
+	 *	Specifies the response time for a MAC request to the Packet
+	 *	FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM).
+	 *	This must be programmed to 0x5.
+	 * @hnpcap: HNP-Capable (HNPCap)
+	 *	This bit is always 0x0.
+	 * @srpcap: SRP-Capable (SRPCap)
+	 *	This bit is always 0x0.
+	 * @ddrsel: ULPI DDR Select (DDRSel)
+	 *	Software should set this bit to 0x0.
+	 * @physel: USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial
+	 *	Software should set this bit to 0x0.
+	 * @fsintf: Full-Speed Serial Interface Select (FSIntf)
+	 *	Software should set this bit to 0x0.
+	 * @ulpi_utmi_sel: ULPI or UTMI+ Select (ULPI_UTMI_Sel)
+	 *	This bit is always 0x0.
+	 * @phyif: PHY Interface (PHYIf)
+	 *	This bit is always 0x1.
+	 * @toutcal: HS/FS Timeout Calibration (TOutCal)
+	 *	The number of PHY clocks that the application programs in this
+	 *	field is added to the high-speed/full-speed interpacket timeout
+	 *	duration in the core to account for any additional delays
+	 *	introduced by the PHY. This may be required, since the delay
+	 *	introduced by the PHY in generating the linestate condition may
+	 *	vary from one PHY to another.
+	 *	The USB standard timeout value for high-speed operation is
+	 *	736 to 816 (inclusive) bit times. The USB standard timeout
+	 *	value for full-speed operation is 16 to 18 (inclusive) bit
+	 *	times. The application must program this field based on the
+	 *	speed of enumeration. The number of bit times added per PHY
+	 *	clock are:
+	 *	High-speed operation:
+	 *	* One 30-MHz PHY clock = 16 bit times
+	 *	* One 60-MHz PHY clock = 8 bit times
+	 *	Full-speed operation:
+	 *	* One 30-MHz PHY clock = 0.4 bit times
+	 *	* One 60-MHz PHY clock = 0.2 bit times
+	 *	* One 48-MHz PHY clock = 0.25 bit times
+	 */
+	struct cvmx_usbcx_gusbcfg_s {
+		__BITFIELD_FIELD(u32 reserved_17_31	: 15,
+		__BITFIELD_FIELD(u32 otgi2csel		: 1,
+		__BITFIELD_FIELD(u32 phylpwrclksel	: 1,
+		__BITFIELD_FIELD(u32 reserved_14_14	: 1,
+		__BITFIELD_FIELD(u32 usbtrdtim		: 4,
+		__BITFIELD_FIELD(u32 hnpcap		: 1,
+		__BITFIELD_FIELD(u32 srpcap		: 1,
+		__BITFIELD_FIELD(u32 ddrsel		: 1,
+		__BITFIELD_FIELD(u32 physel		: 1,
+		__BITFIELD_FIELD(u32 fsintf		: 1,
+		__BITFIELD_FIELD(u32 ulpi_utmi_sel	: 1,
+		__BITFIELD_FIELD(u32 phyif		: 1,
+		__BITFIELD_FIELD(u32 toutcal		: 3,
+		;)))))))))))))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_haint
+ *
+ * Host All Channels Interrupt Register (HAINT)
+ *
+ * When a significant event occurs on a channel, the Host All Channels Interrupt
+ * register interrupts the application using the Host Channels Interrupt bit of
+ * the Core Interrupt register (GINTSTS.HChInt). This is shown in Interrupt.
+ * There is one interrupt bit per channel, up to a maximum of 16 bits. Bits in
+ * this register are set and cleared when the application sets and clears bits
+ * in the corresponding Host Channel-n Interrupt register.
+ */
+union cvmx_usbcx_haint {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_haint_s
+	 * @haint: Channel Interrupts (HAINT)
+	 *	One bit per channel: Bit 0 for Channel 0, bit 15 for Channel 15
+	 */
+	struct cvmx_usbcx_haint_s {
+		__BITFIELD_FIELD(u32 reserved_16_31	: 16,
+		__BITFIELD_FIELD(u32 haint		: 16,
+		;))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_haintmsk
+ *
+ * Host All Channels Interrupt Mask Register (HAINTMSK)
+ *
+ * The Host All Channel Interrupt Mask register works with the Host All Channel
+ * Interrupt register to interrupt the application when an event occurs on a
+ * channel. There is one interrupt mask bit per channel, up to a maximum of 16
+ * bits.
+ * Mask interrupt: 1'b0 Unmask interrupt: 1'b1
+ */
+union cvmx_usbcx_haintmsk {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_haintmsk_s
+	 * @haintmsk: Channel Interrupt Mask (HAINTMsk)
+	 *	One bit per channel: Bit 0 for channel 0, bit 15 for channel 15
+	 */
+	struct cvmx_usbcx_haintmsk_s {
+		__BITFIELD_FIELD(u32 reserved_16_31	: 16,
+		__BITFIELD_FIELD(u32 haintmsk		: 16,
+		;))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_hcchar#
+ *
+ * Host Channel-n Characteristics Register (HCCHAR)
+ *
+ */
+union cvmx_usbcx_hccharx {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_hccharx_s
+	 * @chena: Channel Enable (ChEna)
+	 *	This field is set by the application and cleared by the OTG
+	 *	host.
+	 *	* 1'b0: Channel disabled
+	 *	* 1'b1: Channel enabled
+	 * @chdis: Channel Disable (ChDis)
+	 *	The application sets this bit to stop transmitting/receiving
+	 *	data on a channel, even before the transfer for that channel is
+	 *	complete. The application must wait for the Channel Disabled
+	 *	interrupt before treating the channel as disabled.
+	 * @oddfrm: Odd Frame (OddFrm)
+	 *	This field is set (reset) by the application to indicate that
+	 *	the OTG host must perform a transfer in an odd (micro)frame.
+	 *	This field is applicable for only periodic (isochronous and
+	 *	interrupt) transactions.
+	 *	* 1'b0: Even (micro)frame
+	 *	* 1'b1: Odd (micro)frame
+	 * @devaddr: Device Address (DevAddr)
+	 *	This field selects the specific device serving as the data
+	 *	source or sink.
+	 * @ec: Multi Count (MC) / Error Count (EC)
+	 *	When the Split Enable bit of the Host Channel-n Split Control
+	 *	register (HCSPLTn.SpltEna) is reset (1'b0), this field indicates
+	 *	to the host the number of transactions that should be executed
+	 *	per microframe for this endpoint.
+	 *	* 2'b00: Reserved. This field yields undefined results.
+	 *	* 2'b01: 1 transaction
+	 *	* 2'b10: 2 transactions to be issued for this endpoint per
+	 *	microframe
+	 *	* 2'b11: 3 transactions to be issued for this endpoint per
+	 *	microframe
+	 *	When HCSPLTn.SpltEna is set (1'b1), this field indicates the
+	 *	number of immediate retries to be performed for a periodic split
+	 *	transactions on transaction errors. This field must be set to at
+	 *	least 2'b01.
+	 * @eptype: Endpoint Type (EPType)
+	 *	Indicates the transfer type selected.
+	 *	* 2'b00: Control
+	 *	* 2'b01: Isochronous
+	 *	* 2'b10: Bulk
+	 *	* 2'b11: Interrupt
+	 * @lspddev: Low-Speed Device (LSpdDev)
+	 *	This field is set by the application to indicate that this
+	 *	channel is communicating to a low-speed device.
+	 * @epdir: Endpoint Direction (EPDir)
+	 *	Indicates whether the transaction is IN or OUT.
+	 *	* 1'b0: OUT
+	 *	* 1'b1: IN
+	 * @epnum: Endpoint Number (EPNum)
+	 *	Indicates the endpoint number on the device serving as the
+	 *	data source or sink.
+	 * @mps: Maximum Packet Size (MPS)
+	 *	Indicates the maximum packet size of the associated endpoint.
+	 */
+	struct cvmx_usbcx_hccharx_s {
+		__BITFIELD_FIELD(u32 chena		: 1,
+		__BITFIELD_FIELD(u32 chdis		: 1,
+		__BITFIELD_FIELD(u32 oddfrm		: 1,
+		__BITFIELD_FIELD(u32 devaddr		: 7,
+		__BITFIELD_FIELD(u32 ec			: 2,
+		__BITFIELD_FIELD(u32 eptype		: 2,
+		__BITFIELD_FIELD(u32 lspddev		: 1,
+		__BITFIELD_FIELD(u32 reserved_16_16	: 1,
+		__BITFIELD_FIELD(u32 epdir		: 1,
+		__BITFIELD_FIELD(u32 epnum		: 4,
+		__BITFIELD_FIELD(u32 mps		: 11,
+		;)))))))))))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_hcfg
+ *
+ * Host Configuration Register (HCFG)
+ *
+ * This register configures the core after power-on. Do not make changes to this
+ * register after initializing the host.
+ */
+union cvmx_usbcx_hcfg {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_hcfg_s
+	 * @fslssupp: FS- and LS-Only Support (FSLSSupp)
+	 *	The application uses this bit to control the core's enumeration
+	 *	speed. Using this bit, the application can make the core
+	 *	enumerate as a FS host, even if the connected device supports
+	 *	HS traffic. Do not make changes to this field after initial
+	 *	programming.
+	 *	* 1'b0: HS/FS/LS, based on the maximum speed supported by
+	 *	the connected device
+	 *	* 1'b1: FS/LS-only, even if the connected device can support HS
+	 * @fslspclksel: FS/LS PHY Clock Select (FSLSPclkSel)
+	 *	When the core is in FS Host mode
+	 *	* 2'b00: PHY clock is running at 30/60 MHz
+	 *	* 2'b01: PHY clock is running at 48 MHz
+	 *	* Others: Reserved
+	 *	When the core is in LS Host mode
+	 *	* 2'b00: PHY clock is running at 30/60 MHz. When the
+	 *	UTMI+/ULPI PHY Low Power mode is not selected, use
+	 *	30/60 MHz.
+	 *	* 2'b01: PHY clock is running at 48 MHz. When the UTMI+
+	 *	PHY Low Power mode is selected, use 48MHz if the PHY
+	 *	supplies a 48 MHz clock during LS mode.
+	 *	* 2'b10: PHY clock is running at 6 MHz. In USB 1.1 FS mode,
+	 *	use 6 MHz when the UTMI+ PHY Low Power mode is
+	 *	selected and the PHY supplies a 6 MHz clock during LS
+	 *	mode. If you select a 6 MHz clock during LS mode, you must
+	 *	do a soft reset.
+	 *	* 2'b11: Reserved
+	 */
+	struct cvmx_usbcx_hcfg_s {
+		__BITFIELD_FIELD(u32 reserved_3_31	: 29,
+		__BITFIELD_FIELD(u32 fslssupp		: 1,
+		__BITFIELD_FIELD(u32 fslspclksel	: 2,
+		;)))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_hcint#
+ *
+ * Host Channel-n Interrupt Register (HCINT)
+ *
+ * This register indicates the status of a channel with respect to USB- and
+ * AHB-related events. The application must read this register when the Host
+ * Channels Interrupt bit of the Core Interrupt register (GINTSTS.HChInt) is
+ * set. Before the application can read this register, it must first read
+ * the Host All Channels Interrupt (HAINT) register to get the exact channel
+ * number for the Host Channel-n Interrupt register. The application must clear
+ * the appropriate bit in this register to clear the corresponding bits in the
+ * HAINT and GINTSTS registers.
+ */
+union cvmx_usbcx_hcintx {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_hcintx_s
+	 * @datatglerr: Data Toggle Error (DataTglErr)
+	 * @frmovrun: Frame Overrun (FrmOvrun)
+	 * @bblerr: Babble Error (BblErr)
+	 * @xacterr: Transaction Error (XactErr)
+	 * @nyet: NYET Response Received Interrupt (NYET)
+	 * @ack: ACK Response Received Interrupt (ACK)
+	 * @nak: NAK Response Received Interrupt (NAK)
+	 * @stall: STALL Response Received Interrupt (STALL)
+	 * @ahberr: This bit is always 0x0.
+	 * @chhltd: Channel Halted (ChHltd)
+	 *	Indicates the transfer completed abnormally either because of
+	 *	any USB transaction error or in response to disable request by
+	 *	the application.
+	 * @xfercompl: Transfer Completed (XferCompl)
+	 *	Transfer completed normally without any errors.
+	 */
+	struct cvmx_usbcx_hcintx_s {
+		__BITFIELD_FIELD(u32 reserved_11_31	: 21,
+		__BITFIELD_FIELD(u32 datatglerr		: 1,
+		__BITFIELD_FIELD(u32 frmovrun		: 1,
+		__BITFIELD_FIELD(u32 bblerr		: 1,
+		__BITFIELD_FIELD(u32 xacterr		: 1,
+		__BITFIELD_FIELD(u32 nyet		: 1,
+		__BITFIELD_FIELD(u32 ack		: 1,
+		__BITFIELD_FIELD(u32 nak		: 1,
+		__BITFIELD_FIELD(u32 stall		: 1,
+		__BITFIELD_FIELD(u32 ahberr		: 1,
+		__BITFIELD_FIELD(u32 chhltd		: 1,
+		__BITFIELD_FIELD(u32 xfercompl		: 1,
+		;))))))))))))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_hcintmsk#
+ *
+ * Host Channel-n Interrupt Mask Register (HCINTMSKn)
+ *
+ * This register reflects the mask for each channel status described in the
+ * previous section.
+ * Mask interrupt: 1'b0 Unmask interrupt: 1'b1
+ */
+union cvmx_usbcx_hcintmskx {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_hcintmskx_s
+	 * @datatglerrmsk: Data Toggle Error Mask (DataTglErrMsk)
+	 * @frmovrunmsk: Frame Overrun Mask (FrmOvrunMsk)
+	 * @bblerrmsk: Babble Error Mask (BblErrMsk)
+	 * @xacterrmsk: Transaction Error Mask (XactErrMsk)
+	 * @nyetmsk: NYET Response Received Interrupt Mask (NyetMsk)
+	 * @ackmsk: ACK Response Received Interrupt Mask (AckMsk)
+	 * @nakmsk: NAK Response Received Interrupt Mask (NakMsk)
+	 * @stallmsk: STALL Response Received Interrupt Mask (StallMsk)
+	 * @ahberrmsk: AHB Error Mask (AHBErrMsk)
+	 * @chhltdmsk: Channel Halted Mask (ChHltdMsk)
+	 * @xfercomplmsk: Transfer Completed Mask (XferComplMsk)
+	 */
+	struct cvmx_usbcx_hcintmskx_s {
+		__BITFIELD_FIELD(u32 reserved_11_31		: 21,
+		__BITFIELD_FIELD(u32 datatglerrmsk		: 1,
+		__BITFIELD_FIELD(u32 frmovrunmsk		: 1,
+		__BITFIELD_FIELD(u32 bblerrmsk			: 1,
+		__BITFIELD_FIELD(u32 xacterrmsk			: 1,
+		__BITFIELD_FIELD(u32 nyetmsk			: 1,
+		__BITFIELD_FIELD(u32 ackmsk			: 1,
+		__BITFIELD_FIELD(u32 nakmsk			: 1,
+		__BITFIELD_FIELD(u32 stallmsk			: 1,
+		__BITFIELD_FIELD(u32 ahberrmsk			: 1,
+		__BITFIELD_FIELD(u32 chhltdmsk			: 1,
+		__BITFIELD_FIELD(u32 xfercomplmsk		: 1,
+		;))))))))))))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_hcsplt#
+ *
+ * Host Channel-n Split Control Register (HCSPLT)
+ *
+ */
+union cvmx_usbcx_hcspltx {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_hcspltx_s
+	 * @spltena: Split Enable (SpltEna)
+	 *	The application sets this field to indicate that this channel is
+	 *	enabled to perform split transactions.
+	 * @compsplt: Do Complete Split (CompSplt)
+	 *	The application sets this field to request the OTG host to
+	 *	perform a complete split transaction.
+	 * @xactpos: Transaction Position (XactPos)
+	 *	This field is used to determine whether to send all, first,
+	 *	middle, or last payloads with each OUT transaction.
+	 *	* 2'b11: All. This is the entire data payload is of this
+	 *	transaction (which is less than or equal to 188 bytes).
+	 *	* 2'b10: Begin. This is the first data payload of this
+	 *	transaction (which is larger than 188 bytes).
+	 *	* 2'b00: Mid. This is the middle payload of this transaction
+	 *	(which is larger than 188 bytes).
+	 *	* 2'b01: End. This is the last payload of this transaction
+	 *	(which is larger than 188 bytes).
+	 * @hubaddr: Hub Address (HubAddr)
+	 *	This field holds the device address of the transaction
+	 *	translator's hub.
+	 * @prtaddr: Port Address (PrtAddr)
+	 *	This field is the port number of the recipient transaction
+	 *	translator.
+	 */
+	struct cvmx_usbcx_hcspltx_s {
+		__BITFIELD_FIELD(u32 spltena			: 1,
+		__BITFIELD_FIELD(u32 reserved_17_30		: 14,
+		__BITFIELD_FIELD(u32 compsplt			: 1,
+		__BITFIELD_FIELD(u32 xactpos			: 2,
+		__BITFIELD_FIELD(u32 hubaddr			: 7,
+		__BITFIELD_FIELD(u32 prtaddr			: 7,
+		;))))))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_hctsiz#
+ *
+ * Host Channel-n Transfer Size Register (HCTSIZ)
+ *
+ */
+union cvmx_usbcx_hctsizx {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_hctsizx_s
+	 * @dopng: Do Ping (DoPng)
+	 *	Setting this field to 1 directs the host to do PING protocol.
+	 * @pid: PID (Pid)
+	 *	The application programs this field with the type of PID to use
+	 *	for the initial transaction. The host will maintain this field
+	 *	for the rest of the transfer.
+	 *	* 2'b00: DATA0
+	 *	* 2'b01: DATA2
+	 *	* 2'b10: DATA1
+	 *	* 2'b11: MDATA (non-control)/SETUP (control)
+	 * @pktcnt: Packet Count (PktCnt)
+	 *	This field is programmed by the application with the expected
+	 *	number of packets to be transmitted (OUT) or received (IN).
+	 *	The host decrements this count on every successful
+	 *	transmission or reception of an OUT/IN packet. Once this count
+	 *	reaches zero, the application is interrupted to indicate normal
+	 *	completion.
+	 * @xfersize: Transfer Size (XferSize)
+	 *	For an OUT, this field is the number of data bytes the host will
+	 *	send during the transfer.
+	 *	For an IN, this field is the buffer size that the application
+	 *	has reserved for the transfer. The application is expected to
+	 *	program this field as an integer multiple of the maximum packet
+	 *	size for IN transactions (periodic and non-periodic).
+	 */
+	struct cvmx_usbcx_hctsizx_s {
+		__BITFIELD_FIELD(u32 dopng		: 1,
+		__BITFIELD_FIELD(u32 pid		: 2,
+		__BITFIELD_FIELD(u32 pktcnt		: 10,
+		__BITFIELD_FIELD(u32 xfersize		: 19,
+		;))))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_hfir
+ *
+ * Host Frame Interval Register (HFIR)
+ *
+ * This register stores the frame interval information for the current speed to
+ * which the O2P USB core has enumerated.
+ */
+union cvmx_usbcx_hfir {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_hfir_s
+	 * @frint: Frame Interval (FrInt)
+	 *	The value that the application programs to this field specifies
+	 *	the interval between two consecutive SOFs (FS) or micro-
+	 *	SOFs (HS) or Keep-Alive tokens (HS). This field contains the
+	 *	number of PHY clocks that constitute the required frame
+	 *	interval. The default value set in this field for a FS operation
+	 *	when the PHY clock frequency is 60 MHz. The application can
+	 *	write a value to this register only after the Port Enable bit of
+	 *	the Host Port Control and Status register (HPRT.PrtEnaPort)
+	 *	has been set. If no value is programmed, the core calculates
+	 *	the value based on the PHY clock specified in the FS/LS PHY
+	 *	Clock Select field of the Host Configuration register
+	 *	(HCFG.FSLSPclkSel). Do not change the value of this field
+	 *	after the initial configuration.
+	 *	* 125 us (PHY clock frequency for HS)
+	 *	* 1 ms (PHY clock frequency for FS/LS)
+	 */
+	struct cvmx_usbcx_hfir_s {
+		__BITFIELD_FIELD(u32 reserved_16_31		: 16,
+		__BITFIELD_FIELD(u32 frint			: 16,
+		;))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_hfnum
+ *
+ * Host Frame Number/Frame Time Remaining Register (HFNUM)
+ *
+ * This register indicates the current frame number.
+ * It also indicates the time remaining (in terms of the number of PHY clocks)
+ * in the current (micro)frame.
+ */
+union cvmx_usbcx_hfnum {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_hfnum_s
+	 * @frrem: Frame Time Remaining (FrRem)
+	 *	Indicates the amount of time remaining in the current
+	 *	microframe (HS) or frame (FS/LS), in terms of PHY clocks.
+	 *	This field decrements on each PHY clock. When it reaches
+	 *	zero, this field is reloaded with the value in the Frame
+	 *	Interval register and a new SOF is transmitted on the USB.
+	 * @frnum: Frame Number (FrNum)
+	 *	This field increments when a new SOF is transmitted on the
+	 *	USB, and is reset to 0 when it reaches 16'h3FFF.
+	 */
+	struct cvmx_usbcx_hfnum_s {
+		__BITFIELD_FIELD(u32 frrem		: 16,
+		__BITFIELD_FIELD(u32 frnum		: 16,
+		;))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_hprt
+ *
+ * Host Port Control and Status Register (HPRT)
+ *
+ * This register is available in both Host and Device modes.
+ * Currently, the OTG Host supports only one port.
+ * A single register holds USB port-related information such as USB reset,
+ * enable, suspend, resume, connect status, and test mode for each port. The
+ * R_SS_WC bits in this register can trigger an interrupt to the application
+ * through the Host Port Interrupt bit of the Core Interrupt register
+ * (GINTSTS.PrtInt). On a Port Interrupt, the application must read this
+ * register and clear the bit that caused the interrupt. For the R_SS_WC bits,
+ * the application must write a 1 to the bit to clear the interrupt.
+ */
+union cvmx_usbcx_hprt {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_hprt_s
+	 * @prtspd: Port Speed (PrtSpd)
+	 *	Indicates the speed of the device attached to this port.
+	 *	* 2'b00: High speed
+	 *	* 2'b01: Full speed
+	 *	* 2'b10: Low speed
+	 *	* 2'b11: Reserved
+	 * @prttstctl: Port Test Control (PrtTstCtl)
+	 *	The application writes a nonzero value to this field to put
+	 *	the port into a Test mode, and the corresponding pattern is
+	 *	signaled on the port.
+	 *	* 4'b0000: Test mode disabled
+	 *	* 4'b0001: Test_J mode
+	 *	* 4'b0010: Test_K mode
+	 *	* 4'b0011: Test_SE0_NAK mode
+	 *	* 4'b0100: Test_Packet mode
+	 *	* 4'b0101: Test_Force_Enable
+	 *	* Others: Reserved
+	 *	PrtSpd must be zero (i.e. the interface must be in high-speed
+	 *	mode) to use the PrtTstCtl test modes.
+	 * @prtpwr: Port Power (PrtPwr)
+	 *	The application uses this field to control power to this port,
+	 *	and the core clears this bit on an overcurrent condition.
+	 *	* 1'b0: Power off
+	 *	* 1'b1: Power on
+	 * @prtlnsts: Port Line Status (PrtLnSts)
+	 *	Indicates the current logic level USB data lines
+	 *	* Bit [10]: Logic level of D-
+	 *	* Bit [11]: Logic level of D+
+	 * @prtrst: Port Reset (PrtRst)
+	 *	When the application sets this bit, a reset sequence is
+	 *	started on this port. The application must time the reset
+	 *	period and clear this bit after the reset sequence is
+	 *	complete.
+	 *	* 1'b0: Port not in reset
+	 *	* 1'b1: Port in reset
+	 *	The application must leave this bit set for at least a
+	 *	minimum duration mentioned below to start a reset on the
+	 *	port. The application can leave it set for another 10 ms in
+	 *	addition to the required minimum duration, before clearing
+	 *	the bit, even though there is no maximum limit set by the
+	 *	USB standard.
+	 *	* High speed: 50 ms
+	 *	* Full speed/Low speed: 10 ms
+	 * @prtsusp: Port Suspend (PrtSusp)
+	 *	The application sets this bit to put this port in Suspend
+	 *	mode. The core only stops sending SOFs when this is set.
+	 *	To stop the PHY clock, the application must set the Port
+	 *	Clock Stop bit, which will assert the suspend input pin of
+	 *	the PHY.
+	 *	The read value of this bit reflects the current suspend
+	 *	status of the port. This bit is cleared by the core after a
+	 *	remote wakeup signal is detected or the application sets
+	 *	the Port Reset bit or Port Resume bit in this register or the
+	 *	Resume/Remote Wakeup Detected Interrupt bit or
+	 *	Disconnect Detected Interrupt bit in the Core Interrupt
+	 *	register (GINTSTS.WkUpInt or GINTSTS.DisconnInt,
+	 *	respectively).
+	 *	* 1'b0: Port not in Suspend mode
+	 *	* 1'b1: Port in Suspend mode
+	 * @prtres: Port Resume (PrtRes)
+	 *	The application sets this bit to drive resume signaling on
+	 *	the port. The core continues to drive the resume signal
+	 *	until the application clears this bit.
+	 *	If the core detects a USB remote wakeup sequence, as
+	 *	indicated by the Port Resume/Remote Wakeup Detected
+	 *	Interrupt bit of the Core Interrupt register
+	 *	(GINTSTS.WkUpInt), the core starts driving resume
+	 *	signaling without application intervention and clears this bit
+	 *	when it detects a disconnect condition. The read value of
+	 *	this bit indicates whether the core is currently driving
+	 *	resume signaling.
+	 *	* 1'b0: No resume driven
+	 *	* 1'b1: Resume driven
+	 * @prtovrcurrchng: Port Overcurrent Change (PrtOvrCurrChng)
+	 *	The core sets this bit when the status of the Port
+	 *	Overcurrent Active bit (bit 4) in this register changes.
+	 * @prtovrcurract: Port Overcurrent Active (PrtOvrCurrAct)
+	 *	Indicates the overcurrent condition of the port.
+	 *	* 1'b0: No overcurrent condition
+	 *	* 1'b1: Overcurrent condition
+	 * @prtenchng: Port Enable/Disable Change (PrtEnChng)
+	 *	The core sets this bit when the status of the Port Enable bit
+	 *	[2] of this register changes.
+	 * @prtena: Port Enable (PrtEna)
+	 *	A port is enabled only by the core after a reset sequence,
+	 *	and is disabled by an overcurrent condition, a disconnect
+	 *	condition, or by the application clearing this bit. The
+	 *	application cannot set this bit by a register write. It can only
+	 *	clear it to disable the port. This bit does not trigger any
+	 *	interrupt to the application.
+	 *	* 1'b0: Port disabled
+	 *	* 1'b1: Port enabled
+	 * @prtconndet: Port Connect Detected (PrtConnDet)
+	 *	The core sets this bit when a device connection is detected
+	 *	to trigger an interrupt to the application using the Host Port
+	 *	Interrupt bit of the Core Interrupt register (GINTSTS.PrtInt).
+	 *	The application must write a 1 to this bit to clear the
+	 *	interrupt.
+	 * @prtconnsts: Port Connect Status (PrtConnSts)
+	 *	* 0: No device is attached to the port.
+	 *	* 1: A device is attached to the port.
+	 */
+	struct cvmx_usbcx_hprt_s {
+		__BITFIELD_FIELD(u32 reserved_19_31	: 13,
+		__BITFIELD_FIELD(u32 prtspd		: 2,
+		__BITFIELD_FIELD(u32 prttstctl		: 4,
+		__BITFIELD_FIELD(u32 prtpwr		: 1,
+		__BITFIELD_FIELD(u32 prtlnsts		: 2,
+		__BITFIELD_FIELD(u32 reserved_9_9	: 1,
+		__BITFIELD_FIELD(u32 prtrst		: 1,
+		__BITFIELD_FIELD(u32 prtsusp		: 1,
+		__BITFIELD_FIELD(u32 prtres		: 1,
+		__BITFIELD_FIELD(u32 prtovrcurrchng	: 1,
+		__BITFIELD_FIELD(u32 prtovrcurract	: 1,
+		__BITFIELD_FIELD(u32 prtenchng		: 1,
+		__BITFIELD_FIELD(u32 prtena		: 1,
+		__BITFIELD_FIELD(u32 prtconndet		: 1,
+		__BITFIELD_FIELD(u32 prtconnsts		: 1,
+		;)))))))))))))))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_hptxfsiz
+ *
+ * Host Periodic Transmit FIFO Size Register (HPTXFSIZ)
+ *
+ * This register holds the size and the memory start address of the Periodic
+ * TxFIFO, as shown in Figures 310 and 311.
+ */
+union cvmx_usbcx_hptxfsiz {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_hptxfsiz_s
+	 * @ptxfsize: Host Periodic TxFIFO Depth (PTxFSize)
+	 *	This value is in terms of 32-bit words.
+	 *	* Minimum value is 16
+	 *	* Maximum value is 32768
+	 * @ptxfstaddr: Host Periodic TxFIFO Start Address (PTxFStAddr)
+	 */
+	struct cvmx_usbcx_hptxfsiz_s {
+		__BITFIELD_FIELD(u32 ptxfsize	: 16,
+		__BITFIELD_FIELD(u32 ptxfstaddr	: 16,
+		;))
+	} s;
+};
+
+/**
+ * cvmx_usbc#_hptxsts
+ *
+ * Host Periodic Transmit FIFO/Queue Status Register (HPTXSTS)
+ *
+ * This read-only register contains the free space information for the Periodic
+ * TxFIFO and the Periodic Transmit Request Queue
+ */
+union cvmx_usbcx_hptxsts {
+	u32 u32;
+	/**
+	 * struct cvmx_usbcx_hptxsts_s
+	 * @ptxqtop: Top of the Periodic Transmit Request Queue (PTxQTop)
+	 *	This indicates the entry in the Periodic Tx Request Queue that
+	 *	is currently being processes by the MAC.
+	 *	This register is used for debugging.
+	 *	* Bit [31]: Odd/Even (micro)frame
+	 *	- 1'b0: send in even (micro)frame
+	 *	- 1'b1: send in odd (micro)frame
+	 *	* Bits [30:27]: Channel/endpoint number
+	 *	* Bits [26:25]: Type
+	 *	- 2'b00: IN/OUT
+	 *	- 2'b01: Zero-length packet
+	 *	- 2'b10: CSPLIT
+	 *	- 2'b11: Disable channel command
+	 *	* Bit [24]: Terminate (last entry for the selected
+	 *	channel/endpoint)
+	 * @ptxqspcavail: Periodic Transmit Request Queue Space Available
+	 *	(PTxQSpcAvail)
+	 *	Indicates the number of free locations available to be written
+	 *	in the Periodic Transmit Request Queue. This queue holds both
+	 *	IN and OUT requests.
+	 *	* 8'h0: Periodic Transmit Request Queue is full
+	 *	* 8'h1: 1 location available
+	 *	* 8'h2: 2 locations available
+	 *	* n: n locations available (0..8)
+	 *	* Others: Reserved
+	 * @ptxfspcavail: Periodic Transmit Data FIFO Space Available
+	 *		  (PTxFSpcAvail)
+	 *	Indicates the number of free locations available to be written
+	 *	to in the Periodic TxFIFO.
+	 *	Values are in terms of 32-bit words
+	 *	* 16'h0: Periodic TxFIFO is full
+	 *	* 16'h1: 1 word available
+	 *	* 16'h2: 2 words available
+	 *	* 16'hn: n words available (where 0..32768)
+	 *	* 16'h8000: 32768 words available
+	 *	* Others: Reserved
+	 */
+	struct cvmx_usbcx_hptxsts_s {
+		__BITFIELD_FIELD(u32 ptxqtop		: 8,
+		__BITFIELD_FIELD(u32 ptxqspcavail	: 8,
+		__BITFIELD_FIELD(u32 ptxfspcavail	: 16,
+		;)))
+	} s;
+};
+
+/**
+ * cvmx_usbn#_clk_ctl
+ *
+ * USBN_CLK_CTL = USBN's Clock Control
+ *
+ * This register is used to control the frequency of the hclk and the
+ * hreset and phy_rst signals.
+ */
+union cvmx_usbnx_clk_ctl {
+	u64 u64;
+	/**
+	 * struct cvmx_usbnx_clk_ctl_s
+	 * @divide2: The 'hclk' used by the USB subsystem is derived
+	 *	from the eclk.
+	 *	Also see the field DIVIDE. DIVIDE2<1> must currently
+	 *	be zero because it is not implemented, so the maximum
+	 *	ratio of eclk/hclk is currently 16.
+	 *	The actual divide number for hclk is:
+	 *	(DIVIDE2 + 1) * (DIVIDE + 1)
+	 * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to
+	 *	generate the hclk in the USB Subsystem is held
+	 *	in reset. This bit must be set to '0' before
+	 *	changing the value os DIVIDE in this register.
+	 *	The reset to the HCLK_DIVIDERis also asserted
+	 *	when core reset is asserted.
+	 * @p_x_on: Force USB-PHY on during suspend.
+	 *	'1' USB-PHY XO block is powered-down during
+	 *	suspend.
+	 *	'0' USB-PHY XO block is powered-up during
+	 *	suspend.
+	 *	The value of this field must be set while POR is
+	 *	active.
+	 * @p_rtype: PHY reference clock type
+	 *	On CN50XX/CN52XX/CN56XX the values are:
+	 *		'0' The USB-PHY uses a 12MHz crystal as a clock source
+	 *		    at the USB_XO and USB_XI pins.
+	 *		'1' Reserved.
+	 *		'2' The USB_PHY uses 12/24/48MHz 2.5V board clock at the
+	 *		    USB_XO pin. USB_XI should be tied to ground in this
+	 *		    case.
+	 *		'3' Reserved.
+	 *	On CN3xxx bits 14 and 15 are p_xenbn and p_rclk and values are:
+	 *		'0' Reserved.
+	 *		'1' Reserved.
+	 *		'2' The PHY PLL uses the XO block output as a reference.
+	 *		    The XO block uses an external clock supplied on the
+	 *		    XO pin. USB_XI should be tied to ground for this
+	 *		    usage.
+	 *		'3' The XO block uses the clock from a crystal.
+	 * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to
+	 *	remain powered in Suspend Mode.
+	 *	'1' The USB-PHY XO Bias, Bandgap and PLL are
+	 *	powered down in suspend mode.
+	 *	The value of this field must be set while POR is
+	 *	active.
+	 * @p_c_sel: Phy clock speed select.
+	 *	Selects the reference clock / crystal frequency.
+	 *	'11': Reserved
+	 *	'10': 48 MHz (reserved when a crystal is used)
+	 *	'01': 24 MHz (reserved when a crystal is used)
+	 *	'00': 12 MHz
+	 *	The value of this field must be set while POR is
+	 *	active.
+	 *	NOTE: if a crystal is used as a reference clock,
+	 *	this field must be set to 12 MHz.
+	 * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV.
+	 * @sd_mode: Scaledown mode for the USBC. Control timing events
+	 *	in the USBC, for normal operation this must be '0'.
+	 * @s_bist: Starts bist on the hclk memories, during the '0'
+	 *	to '1' transition.
+	 * @por: Power On Reset for the PHY.
+	 *	Resets all the PHYS registers and state machines.
+	 * @enable: When '1' allows the generation of the hclk. When
+	 *	'0' the hclk will not be generated. SEE DIVIDE
+	 *	field of this register.
+	 * @prst: When this field is '0' the reset associated with
+	 *	the phy_clk functionality in the USB Subsystem is
+	 *	help in reset. This bit should not be set to '1'
+	 *	until the time it takes 6 clocks (hclk or phy_clk,
+	 *	whichever is slower) has passed. Under normal
+	 *	operation once this bit is set to '1' it should not
+	 *	be set to '0'.
+	 * @hrst: When this field is '0' the reset associated with
+	 *	the hclk functioanlity in the USB Subsystem is
+	 *	held in reset.This bit should not be set to '1'
+	 *	until 12ms after phy_clk is stable. Under normal
+	 *	operation, once this bit is set to '1' it should
+	 *	not be set to '0'.
+	 * @divide: The frequency of 'hclk' used by the USB subsystem
+	 *	is the eclk frequency divided by the value of
+	 *	(DIVIDE2 + 1) * (DIVIDE + 1), also see the field
+	 *	DIVIDE2 of this register.
+	 *	The hclk frequency should be less than 125Mhz.
+	 *	After writing a value to this field the SW should
+	 *	read the field for the value written.
+	 *	The ENABLE field of this register should not be set
+	 *	until AFTER this field is set and then read.
+	 */
+	struct cvmx_usbnx_clk_ctl_s {
+		__BITFIELD_FIELD(u64 reserved_20_63	: 44,
+		__BITFIELD_FIELD(u64 divide2		: 2,
+		__BITFIELD_FIELD(u64 hclk_rst		: 1,
+		__BITFIELD_FIELD(u64 p_x_on		: 1,
+		__BITFIELD_FIELD(u64 p_rtype		: 2,
+		__BITFIELD_FIELD(u64 p_com_on		: 1,
+		__BITFIELD_FIELD(u64 p_c_sel		: 2,
+		__BITFIELD_FIELD(u64 cdiv_byp		: 1,
+		__BITFIELD_FIELD(u64 sd_mode		: 2,
+		__BITFIELD_FIELD(u64 s_bist		: 1,
+		__BITFIELD_FIELD(u64 por		: 1,
+		__BITFIELD_FIELD(u64 enable		: 1,
+		__BITFIELD_FIELD(u64 prst		: 1,
+		__BITFIELD_FIELD(u64 hrst		: 1,
+		__BITFIELD_FIELD(u64 divide		: 3,
+		;)))))))))))))))
+	} s;
+};
+
+/**
+ * cvmx_usbn#_usbp_ctl_status
+ *
+ * USBN_USBP_CTL_STATUS = USBP Control And Status Register
+ *
+ * Contains general control and status information for the USBN block.
+ */
+union cvmx_usbnx_usbp_ctl_status {
+	u64 u64;
+	/**
+	 * struct cvmx_usbnx_usbp_ctl_status_s
+	 * @txrisetune: HS Transmitter Rise/Fall Time Adjustment
+	 * @txvreftune: HS DC Voltage Level Adjustment
+	 * @txfslstune: FS/LS Source Impedance Adjustment
+	 * @txhsxvtune: Transmitter High-Speed Crossover Adjustment
+	 * @sqrxtune: Squelch Threshold Adjustment
+	 * @compdistune: Disconnect Threshold Adjustment
+	 * @otgtune: VBUS Valid Threshold Adjustment
+	 * @otgdisable: OTG Block Disable
+	 * @portreset: Per_Port Reset
+	 * @drvvbus: Drive VBUS
+	 * @lsbist: Low-Speed BIST Enable.
+	 * @fsbist: Full-Speed BIST Enable.
+	 * @hsbist: High-Speed BIST Enable.
+	 * @bist_done: PHY Bist Done.
+	 *	Asserted at the end of the PHY BIST sequence.
+	 * @bist_err: PHY Bist Error.
+	 *	Indicates an internal error was detected during
+	 *	the BIST sequence.
+	 * @tdata_out: PHY Test Data Out.
+	 *	Presents either internally generated signals or
+	 *	test register contents, based upon the value of
+	 *	test_data_out_sel.
+	 * @siddq: Drives the USBP (USB-PHY) SIDDQ input.
+	 *	Normally should be set to zero.
+	 *	When customers have no intent to use USB PHY
+	 *	interface, they should:
+	 *	- still provide 3.3V to USB_VDD33, and
+	 *	- tie USB_REXT to 3.3V supply, and
+	 *	- set USBN*_USBP_CTL_STATUS[SIDDQ]=1
+	 * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable
+	 * @dma_bmode: When set to 1 the L2C DMA address will be updated
+	 *	with byte-counts between packets. When set to 0
+	 *	the L2C DMA address is incremented to the next
+	 *	4-byte aligned address after adding byte-count.
+	 * @usbc_end: Bigendian input to the USB Core. This should be
+	 *	set to '0' for operation.
+	 * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
+	 * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
+	 * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
+	 *	This signal enables the pull-down resistance on
+	 *	the D+ line. '1' pull down-resistance is connected
+	 *	to D+/ '0' pull down resistance is not connected
+	 *	to D+. When an A/B device is acting as a host
+	 *	(downstream-facing port), dp_pulldown and
+	 *	dm_pulldown are enabled. This must not toggle
+	 *	during normal operation.
+	 * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
+	 *	This signal enables the pull-down resistance on
+	 *	the D- line. '1' pull down-resistance is connected
+	 *	to D-. '0' pull down resistance is not connected
+	 *	to D-. When an A/B device is acting as a host
+	 *	(downstream-facing port), dp_pulldown and
+	 *	dm_pulldown are enabled. This must not toggle
+	 *	during normal operation.
+	 * @hst_mode: When '0' the USB is acting as HOST, when '1'
+	 *	USB is acting as device. This field needs to be
+	 *	set while the USB is in reset.
+	 * @tuning: Transmitter Tuning for High-Speed Operation.
+	 *	Tunes the current supply and rise/fall output
+	 *	times for high-speed operation.
+	 *	[20:19] == 11: Current supply increased
+	 *	approximately 9%
+	 *	[20:19] == 10: Current supply increased
+	 *	approximately 4.5%
+	 *	[20:19] == 01: Design default.
+	 *	[20:19] == 00: Current supply decreased
+	 *	approximately 4.5%
+	 *	[22:21] == 11: Rise and fall times are increased.
+	 *	[22:21] == 10: Design default.
+	 *	[22:21] == 01: Rise and fall times are decreased.
+	 *	[22:21] == 00: Rise and fall times are decreased
+	 *	further as compared to the 01 setting.
+	 * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
+	 *	Enables or disables bit stuffing on data[15:8]
+	 *	when bit-stuffing is enabled.
+	 * @tx_bs_en: Transmit Bit Stuffing on [7:0].
+	 *	Enables or disables bit stuffing on data[7:0]
+	 *	when bit-stuffing is enabled.
+	 * @loop_enb: PHY Loopback Test Enable.
+	 *	'1': During data transmission the receive is
+	 *	enabled.
+	 *	'0': During data transmission the receive is
+	 *	disabled.
+	 *	Must be '0' for normal operation.
+	 * @vtest_enb: Analog Test Pin Enable.
+	 *	'1' The PHY's analog_test pin is enabled for the
+	 *	input and output of applicable analog test signals.
+	 *	'0' THe analog_test pin is disabled.
+	 * @bist_enb: Built-In Self Test Enable.
+	 *	Used to activate BIST in the PHY.
+	 * @tdata_sel: Test Data Out Select.
+	 *	'1' test_data_out[3:0] (PHY) register contents
+	 *	are output. '0' internally generated signals are
+	 *	output.
+	 * @taddr_in: Mode Address for Test Interface.
+	 *	Specifies the register address for writing to or
+	 *	reading from the PHY test interface register.
+	 * @tdata_in: Internal Testing Register Input Data and Select
+	 *	This is a test bus. Data is present on [3:0],
+	 *	and its corresponding select (enable) is present
+	 *	on bits [7:4].
+	 * @ate_reset: Reset input from automatic test equipment.
+	 *	This is a test signal. When the USB Core is
+	 *	powered up (not in Susned Mode), an automatic
+	 *	tester can use this to disable phy_clock and
+	 *	free_clk, then re-enable them with an aligned
+	 *	phase.
+	 *	'1': The phy_clk and free_clk outputs are
+	 *	disabled. "0": The phy_clock and free_clk outputs
+	 *	are available within a specific period after the
+	 *	de-assertion.
+	 */
+	struct cvmx_usbnx_usbp_ctl_status_s {
+		__BITFIELD_FIELD(u64 txrisetune		: 1,
+		__BITFIELD_FIELD(u64 txvreftune		: 4,
+		__BITFIELD_FIELD(u64 txfslstune		: 4,
+		__BITFIELD_FIELD(u64 txhsxvtune		: 2,
+		__BITFIELD_FIELD(u64 sqrxtune		: 3,
+		__BITFIELD_FIELD(u64 compdistune	: 3,
+		__BITFIELD_FIELD(u64 otgtune		: 3,
+		__BITFIELD_FIELD(u64 otgdisable		: 1,
+		__BITFIELD_FIELD(u64 portreset		: 1,
+		__BITFIELD_FIELD(u64 drvvbus		: 1,
+		__BITFIELD_FIELD(u64 lsbist		: 1,
+		__BITFIELD_FIELD(u64 fsbist		: 1,
+		__BITFIELD_FIELD(u64 hsbist		: 1,
+		__BITFIELD_FIELD(u64 bist_done		: 1,
+		__BITFIELD_FIELD(u64 bist_err		: 1,
+		__BITFIELD_FIELD(u64 tdata_out		: 4,
+		__BITFIELD_FIELD(u64 siddq		: 1,
+		__BITFIELD_FIELD(u64 txpreemphasistune	: 1,
+		__BITFIELD_FIELD(u64 dma_bmode		: 1,
+		__BITFIELD_FIELD(u64 usbc_end		: 1,
+		__BITFIELD_FIELD(u64 usbp_bist		: 1,
+		__BITFIELD_FIELD(u64 tclk		: 1,
+		__BITFIELD_FIELD(u64 dp_pulld		: 1,
+		__BITFIELD_FIELD(u64 dm_pulld		: 1,
+		__BITFIELD_FIELD(u64 hst_mode		: 1,
+		__BITFIELD_FIELD(u64 tuning		: 4,
+		__BITFIELD_FIELD(u64 tx_bs_enh		: 1,
+		__BITFIELD_FIELD(u64 tx_bs_en		: 1,
+		__BITFIELD_FIELD(u64 loop_enb		: 1,
+		__BITFIELD_FIELD(u64 vtest_enb		: 1,
+		__BITFIELD_FIELD(u64 bist_enb		: 1,
+		__BITFIELD_FIELD(u64 tdata_sel		: 1,
+		__BITFIELD_FIELD(u64 taddr_in		: 4,
+		__BITFIELD_FIELD(u64 tdata_in		: 8,
+		__BITFIELD_FIELD(u64 ate_reset		: 1,
+		;)))))))))))))))))))))))))))))))))))
+	} s;
+};
+
+#endif /* __OCTEON_HCD_H__ */
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
new file mode 100644
index 000000000..360680769
--- /dev/null
+++ b/drivers/usb/host/ohci-at91.c
@@ -0,0 +1,732 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ *  Copyright (C) 2004 SAN People (Pty) Ltd.
+ *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *
+ * AT91 Bus Glue
+ *
+ * Based on fragments of 2.4 driver by Rick Bronson.
+ * Based on ohci-omap.c
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/atmel.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <soc/at91/atmel-sfr.h>
+
+#include "ohci.h"
+
+#define valid_port(index)	((index) >= 0 && (index) < AT91_MAX_USBH_PORTS)
+#define at91_for_each_port(index)	\
+		for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++)
+
+/* interface, function and usb clocks; sometimes also an AHB clock */
+#define hcd_to_ohci_at91_priv(h) \
+	((struct ohci_at91_priv *)hcd_to_ohci(h)->priv)
+
+#define AT91_MAX_USBH_PORTS	3
+struct at91_usbh_data {
+	struct gpio_desc *vbus_pin[AT91_MAX_USBH_PORTS];
+	struct gpio_desc *overcurrent_pin[AT91_MAX_USBH_PORTS];
+	u8 ports;				/* number of ports on root hub */
+	u8 overcurrent_supported;
+	u8 overcurrent_status[AT91_MAX_USBH_PORTS];
+	u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
+};
+
+struct ohci_at91_priv {
+	struct clk *iclk;
+	struct clk *fclk;
+	struct clk *hclk;
+	bool clocked;
+	bool wakeup;		/* Saved wake-up state for resume */
+	struct regmap *sfr_regmap;
+	u32 suspend_smc_id;
+};
+/* interface and function clocks; sometimes also an AHB clock */
+
+#define DRIVER_DESC "OHCI Atmel driver"
+
+static struct hc_driver __read_mostly ohci_at91_hc_driver;
+
+static const struct ohci_driver_overrides ohci_at91_drv_overrides __initconst = {
+	.extra_priv_size = sizeof(struct ohci_at91_priv),
+};
+
+/*-------------------------------------------------------------------------*/
+
+static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
+{
+	if (ohci_at91->clocked)
+		return;
+
+	clk_set_rate(ohci_at91->fclk, 48000000);
+	clk_prepare_enable(ohci_at91->hclk);
+	clk_prepare_enable(ohci_at91->iclk);
+	clk_prepare_enable(ohci_at91->fclk);
+	ohci_at91->clocked = true;
+}
+
+static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
+{
+	if (!ohci_at91->clocked)
+		return;
+
+	clk_disable_unprepare(ohci_at91->fclk);
+	clk_disable_unprepare(ohci_at91->iclk);
+	clk_disable_unprepare(ohci_at91->hclk);
+	ohci_at91->clocked = false;
+}
+
+static void at91_start_hc(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ohci_regs __iomem *regs = hcd->regs;
+	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+
+	dev_dbg(&pdev->dev, "start\n");
+
+	/*
+	 * Start the USB clocks.
+	 */
+	at91_start_clock(ohci_at91);
+
+	/*
+	 * The USB host controller must remain in reset.
+	 */
+	writel(0, &regs->control);
+}
+
+static void at91_stop_hc(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+
+	dev_dbg(&pdev->dev, "stop\n");
+
+	/*
+	 * Put the USB host controller into reset.
+	 */
+	usb_hcd_platform_shutdown(pdev);
+
+	/*
+	 * Stop the USB clocks.
+	 */
+	at91_stop_clock(ohci_at91);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
+
+static u32 at91_dt_suspend_smc(struct device *dev)
+{
+	u32 suspend_smc_id;
+
+	if (!dev->of_node)
+		return 0;
+
+	if (of_property_read_u32(dev->of_node, "microchip,suspend-smc-id", &suspend_smc_id))
+		return 0;
+
+	return suspend_smc_id;
+}
+
+static struct regmap *at91_dt_syscon_sfr(void)
+{
+	struct regmap *regmap;
+
+	regmap = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
+	if (IS_ERR(regmap)) {
+		regmap = syscon_regmap_lookup_by_compatible("microchip,sam9x60-sfr");
+		if (IS_ERR(regmap))
+			regmap = NULL;
+	}
+
+	return regmap;
+}
+
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
+
+
+/*
+ * usb_hcd_at91_probe - initialize AT91-based HCDs
+ * @driver:	Pointer to hc driver instance
+ * @pdev:	USB controller to probe
+ *
+ * Context: task context, might sleep
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ */
+static int usb_hcd_at91_probe(const struct hc_driver *driver,
+			struct platform_device *pdev)
+{
+	struct at91_usbh_data *board;
+	struct ohci_hcd *ohci;
+	int retval;
+	struct usb_hcd *hcd;
+	struct ohci_at91_priv *ohci_at91;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_dbg(dev, "hcd probe: missing irq resource\n");
+		return irq;
+	}
+
+	hcd = usb_create_hcd(driver, dev, "at91");
+	if (!hcd)
+		return -ENOMEM;
+	ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(hcd->regs)) {
+		retval = PTR_ERR(hcd->regs);
+		goto err;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	ohci_at91->iclk = devm_clk_get(dev, "ohci_clk");
+	if (IS_ERR(ohci_at91->iclk)) {
+		dev_err(dev, "failed to get ohci_clk\n");
+		retval = PTR_ERR(ohci_at91->iclk);
+		goto err;
+	}
+	ohci_at91->fclk = devm_clk_get(dev, "uhpck");
+	if (IS_ERR(ohci_at91->fclk)) {
+		dev_err(dev, "failed to get uhpck\n");
+		retval = PTR_ERR(ohci_at91->fclk);
+		goto err;
+	}
+	ohci_at91->hclk = devm_clk_get(dev, "hclk");
+	if (IS_ERR(ohci_at91->hclk)) {
+		dev_err(dev, "failed to get hclk\n");
+		retval = PTR_ERR(ohci_at91->hclk);
+		goto err;
+	}
+
+	ohci_at91->suspend_smc_id = at91_dt_suspend_smc(dev);
+	if (!ohci_at91->suspend_smc_id)  {
+		dev_dbg(dev, "failed to find sfr suspend smc id, using regmap\n");
+		ohci_at91->sfr_regmap = at91_dt_syscon_sfr();
+		if (!ohci_at91->sfr_regmap)
+			dev_dbg(dev, "failed to find sfr node\n");
+	}
+
+	board = hcd->self.controller->platform_data;
+	ohci = hcd_to_ohci(hcd);
+	ohci->num_ports = board->ports;
+	at91_start_hc(pdev);
+
+	/*
+	 * The RemoteWakeupConnected bit has to be set explicitly
+	 * before calling ohci_run. The reset value of this bit is 0.
+	 */
+	ohci->hc_control = OHCI_CTRL_RWC;
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval == 0) {
+		device_wakeup_enable(hcd->self.controller);
+		return retval;
+	}
+
+	/* Error handling */
+	at91_stop_hc(pdev);
+
+ err:
+	usb_put_hcd(hcd);
+	return retval;
+}
+
+
+/* may be called with controller, bus, and devices active */
+
+/*
+ * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs
+ * @hcd:	USB controller to remove
+ * @pdev:	Platform device required for cleanup
+ *
+ * Context: task context, might sleep
+ *
+ * Reverses the effect of usb_hcd_at91_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, "rmmod" or something similar.
+ */
+static void usb_hcd_at91_remove(struct usb_hcd *hcd,
+				struct platform_device *pdev)
+{
+	usb_remove_hcd(hcd);
+	at91_stop_hc(pdev);
+	usb_put_hcd(hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
+{
+	if (!valid_port(port))
+		return;
+
+	gpiod_set_value(pdata->vbus_pin[port], enable);
+}
+
+static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
+{
+	if (!valid_port(port))
+		return -EINVAL;
+
+	return gpiod_get_value(pdata->vbus_pin[port]);
+}
+
+/*
+ * Update the status data from the hub with the over-current indicator change.
+ */
+static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+	int length = ohci_hub_status_data(hcd, buf);
+	int port;
+
+	at91_for_each_port(port) {
+		if (pdata->overcurrent_changed[port]) {
+			if (!length)
+				length = 1;
+			buf[0] |= 1 << (port + 1);
+		}
+	}
+
+	return length;
+}
+
+static int ohci_at91_port_suspend(struct ohci_at91_priv *ohci_at91, u8 set)
+{
+	struct regmap *regmap = ohci_at91->sfr_regmap;
+	u32 regval;
+	int ret;
+
+	if (ohci_at91->suspend_smc_id) {
+		struct arm_smccc_res res;
+
+		arm_smccc_smc(ohci_at91->suspend_smc_id, set, 0, 0, 0, 0, 0, 0, &res);
+		if (res.a0)
+			return -EINVAL;
+	} else if (regmap) {
+		ret = regmap_read(regmap, AT91_SFR_OHCIICR, &regval);
+		if (ret)
+			return ret;
+
+		if (set)
+			regval |= AT91_OHCIICR_USB_SUSPEND;
+		else
+			regval &= ~AT91_OHCIICR_USB_SUSPEND;
+
+		regmap_write(regmap, AT91_SFR_OHCIICR, regval);
+	}
+
+	return 0;
+}
+
+/*
+ * Look at the control requests to the root hub and see if we need to override.
+ */
+static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+				 u16 wIndex, char *buf, u16 wLength)
+{
+	struct at91_usbh_data *pdata = dev_get_platdata(hcd->self.controller);
+	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+	struct usb_hub_descriptor *desc;
+	int ret = -EINVAL;
+	u32 *data = (u32 *)buf;
+
+	dev_dbg(hcd->self.controller,
+		"ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
+		hcd, typeReq, wValue, wIndex, buf, wLength);
+
+	wIndex--;
+
+	switch (typeReq) {
+	case SetPortFeature:
+		switch (wValue) {
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
+			if (valid_port(wIndex)) {
+				ohci_at91_usb_set_power(pdata, wIndex, 1);
+				ret = 0;
+			}
+
+			goto out;
+
+		case USB_PORT_FEAT_SUSPEND:
+			dev_dbg(hcd->self.controller, "SetPortFeat: SUSPEND\n");
+			if (valid_port(wIndex)) {
+				ohci_at91_port_suspend(ohci_at91, 1);
+				return 0;
+			}
+			break;
+		}
+		break;
+
+	case ClearPortFeature:
+		switch (wValue) {
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: C_OVER_CURRENT\n");
+
+			if (valid_port(wIndex)) {
+				pdata->overcurrent_changed[wIndex] = 0;
+				pdata->overcurrent_status[wIndex] = 0;
+			}
+
+			goto out;
+
+		case USB_PORT_FEAT_OVER_CURRENT:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: OVER_CURRENT\n");
+
+			if (valid_port(wIndex))
+				pdata->overcurrent_status[wIndex] = 0;
+
+			goto out;
+
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: POWER\n");
+
+			if (valid_port(wIndex)) {
+				ohci_at91_usb_set_power(pdata, wIndex, 0);
+				return 0;
+			}
+			break;
+
+		case USB_PORT_FEAT_SUSPEND:
+			dev_dbg(hcd->self.controller, "ClearPortFeature: SUSPEND\n");
+			if (valid_port(wIndex)) {
+				ohci_at91_port_suspend(ohci_at91, 0);
+				return 0;
+			}
+			break;
+		}
+		break;
+	}
+
+	ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength);
+	if (ret)
+		goto out;
+
+	switch (typeReq) {
+	case GetHubDescriptor:
+
+		/* update the hub's descriptor */
+
+		desc = (struct usb_hub_descriptor *)buf;
+
+		dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
+			desc->wHubCharacteristics);
+
+		/* remove the old configurations for power-switching, and
+		 * over-current protection, and insert our new configuration
+		 */
+
+		desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
+		desc->wHubCharacteristics |=
+			cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM);
+
+		if (pdata->overcurrent_supported) {
+			desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
+			desc->wHubCharacteristics |=
+				cpu_to_le16(HUB_CHAR_INDV_PORT_OCPM);
+		}
+
+		dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
+			desc->wHubCharacteristics);
+
+		return ret;
+
+	case GetPortStatus:
+		/* check port status */
+
+		dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
+
+		if (valid_port(wIndex)) {
+			if (!ohci_at91_usb_get_power(pdata, wIndex))
+				*data &= ~cpu_to_le32(RH_PS_PPS);
+
+			if (pdata->overcurrent_changed[wIndex])
+				*data |= cpu_to_le32(RH_PS_OCIC);
+
+			if (pdata->overcurrent_status[wIndex])
+				*data |= cpu_to_le32(RH_PS_POCI);
+		}
+	}
+
+ out:
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
+{
+	struct platform_device *pdev = data;
+	struct at91_usbh_data *pdata = dev_get_platdata(&pdev->dev);
+	int val, port;
+
+	/* From the GPIO notifying the over-current situation, find
+	 * out the corresponding port */
+	at91_for_each_port(port) {
+		if (gpiod_to_irq(pdata->overcurrent_pin[port]) == irq)
+			break;
+	}
+
+	if (port == AT91_MAX_USBH_PORTS) {
+		dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n");
+		return IRQ_HANDLED;
+	}
+
+	val = gpiod_get_value(pdata->overcurrent_pin[port]);
+
+	/* When notified of an over-current situation, disable power
+	   on the corresponding port, and mark this port in
+	   over-current. */
+	if (!val) {
+		ohci_at91_usb_set_power(pdata, port, 0);
+		pdata->overcurrent_status[port]  = 1;
+		pdata->overcurrent_changed[port] = 1;
+	}
+
+	dev_dbg(& pdev->dev, "overcurrent situation %s\n",
+		val ? "exited" : "notified");
+
+	return IRQ_HANDLED;
+}
+
+static const struct of_device_id at91_ohci_dt_ids[] = {
+	{ .compatible = "atmel,at91rm9200-ohci" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
+
+/*-------------------------------------------------------------------------*/
+
+static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct at91_usbh_data	*pdata;
+	int			i;
+	int			ret;
+	int			err;
+	u32			ports;
+
+	/* Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdev->dev.platform_data = pdata;
+
+	if (!of_property_read_u32(np, "num-ports", &ports))
+		pdata->ports = ports;
+
+	at91_for_each_port(i) {
+		if (i >= pdata->ports)
+			break;
+
+		pdata->vbus_pin[i] =
+			devm_gpiod_get_index_optional(&pdev->dev, "atmel,vbus",
+						      i, GPIOD_OUT_HIGH);
+		if (IS_ERR(pdata->vbus_pin[i])) {
+			err = PTR_ERR(pdata->vbus_pin[i]);
+			dev_err(&pdev->dev, "unable to claim gpio \"vbus\": %d\n", err);
+			continue;
+		}
+	}
+
+	at91_for_each_port(i) {
+		if (i >= pdata->ports)
+			break;
+
+		pdata->overcurrent_pin[i] =
+			devm_gpiod_get_index_optional(&pdev->dev, "atmel,oc",
+						      i, GPIOD_IN);
+		if (!pdata->overcurrent_pin[i])
+			continue;
+		if (IS_ERR(pdata->overcurrent_pin[i])) {
+			err = PTR_ERR(pdata->overcurrent_pin[i]);
+			dev_err(&pdev->dev, "unable to claim gpio \"overcurrent\": %d\n", err);
+			continue;
+		}
+
+		ret = devm_request_irq(&pdev->dev,
+				       gpiod_to_irq(pdata->overcurrent_pin[i]),
+				       ohci_hcd_at91_overcurrent_irq,
+				       IRQF_SHARED,
+				       "ohci_overcurrent", pdev);
+		if (ret)
+			dev_info(&pdev->dev, "failed to request gpio \"overcurrent\" IRQ\n");
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+	return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
+}
+
+static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
+{
+	struct at91_usbh_data	*pdata = dev_get_platdata(&pdev->dev);
+	int			i;
+
+	if (pdata) {
+		at91_for_each_port(i)
+			ohci_at91_usb_set_power(pdata, i, 0);
+	}
+
+	device_init_wakeup(&pdev->dev, 0);
+	usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev);
+	return 0;
+}
+
+static int __maybe_unused
+ohci_hcd_at91_drv_suspend(struct device *dev)
+{
+	struct usb_hcd	*hcd = dev_get_drvdata(dev);
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+	int		ret;
+
+	/*
+	 * Disable wakeup if we are going to sleep with slow clock mode
+	 * enabled.
+	 */
+	ohci_at91->wakeup = device_may_wakeup(dev)
+			&& !at91_suspend_entering_slow_clock();
+
+	if (ohci_at91->wakeup)
+		enable_irq_wake(hcd->irq);
+
+	ret = ohci_suspend(hcd, ohci_at91->wakeup);
+	if (ret) {
+		if (ohci_at91->wakeup)
+			disable_irq_wake(hcd->irq);
+		return ret;
+	}
+	/*
+	 * The integrated transceivers seem unable to notice disconnect,
+	 * reconnect, or wakeup without the 48 MHz clock active.  so for
+	 * correctness, always discard connection state (using reset).
+	 *
+	 * REVISIT: some boards will be able to turn VBUS off...
+	 */
+	if (!ohci_at91->wakeup) {
+		ohci->rh_state = OHCI_RH_HALTED;
+
+		/* flush the writes */
+		(void) ohci_readl (ohci, &ohci->regs->control);
+		msleep(1);
+		ohci_at91_port_suspend(ohci_at91, 1);
+		at91_stop_clock(ohci_at91);
+	} else {
+		ohci_at91_port_suspend(ohci_at91, 1);
+	}
+
+	return ret;
+}
+
+static int __maybe_unused
+ohci_hcd_at91_drv_resume(struct device *dev)
+{
+	struct usb_hcd	*hcd = dev_get_drvdata(dev);
+	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+
+	ohci_at91_port_suspend(ohci_at91, 0);
+
+	if (ohci_at91->wakeup)
+		disable_irq_wake(hcd->irq);
+	else
+		at91_start_clock(ohci_at91);
+
+	/*
+	 * According to the comment in ohci_hcd_at91_drv_suspend()
+	 * we need to do a reset if the 48Mhz clock was stopped,
+	 * that is, if ohci_at91->wakeup is clear. Tell ohci_resume()
+	 * to reset in this case by setting its "hibernated" flag.
+	 */
+	ohci_resume(hcd, !ohci_at91->wakeup);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ohci_hcd_at91_pm_ops, ohci_hcd_at91_drv_suspend,
+					ohci_hcd_at91_drv_resume);
+
+static struct platform_driver ohci_hcd_at91_driver = {
+	.probe		= ohci_hcd_at91_drv_probe,
+	.remove		= ohci_hcd_at91_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "at91_ohci",
+		.pm	= &ohci_hcd_at91_pm_ops,
+		.of_match_table	= at91_ohci_dt_ids,
+	},
+};
+
+static int __init ohci_at91_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ohci_init_driver(&ohci_at91_hc_driver, &ohci_at91_drv_overrides);
+
+	/*
+	 * The Atmel HW has some unusual quirks, which require Atmel-specific
+	 * workarounds. We override certain hc_driver functions here to
+	 * achieve that. We explicitly do not enhance ohci_driver_overrides to
+	 * allow this more easily, since this is an unusual case, and we don't
+	 * want to encourage others to override these functions by making it
+	 * too easy.
+	 */
+
+	ohci_at91_hc_driver.hub_status_data	= ohci_at91_hub_status_data;
+	ohci_at91_hc_driver.hub_control		= ohci_at91_hub_control;
+
+	return platform_driver_register(&ohci_hcd_at91_driver);
+}
+module_init(ohci_at91_init);
+
+static void __exit ohci_at91_cleanup(void)
+{
+	platform_driver_unregister(&ohci_hcd_at91_driver);
+}
+module_exit(ohci_at91_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_ohci");
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
new file mode 100644
index 000000000..d4818e8d6
--- /dev/null
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -0,0 +1,582 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * TI DA8xx (OMAP-L1x) Bus Glue
+ *
+ * Derived from: ohci-omap.c and ohci-s3c2410.c
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <asm/unaligned.h>
+
+#include "ohci.h"
+
+#define DRIVER_DESC "DA8XX"
+#define DRV_NAME "ohci-da8xx"
+
+static struct hc_driver __read_mostly ohci_da8xx_hc_driver;
+
+static int (*orig_ohci_hub_control)(struct usb_hcd  *hcd, u16 typeReq,
+			u16 wValue, u16 wIndex, char *buf, u16 wLength);
+static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf);
+
+struct da8xx_ohci_hcd {
+	struct usb_hcd *hcd;
+	struct clk *usb11_clk;
+	struct phy *usb11_phy;
+	struct regulator *vbus_reg;
+	struct notifier_block nb;
+	struct gpio_desc *oc_gpio;
+};
+
+#define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
+
+/* Over-current indicator change bitmask */
+static volatile u16 ocic_mask;
+
+static int ohci_da8xx_enable(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+	int ret;
+
+	ret = clk_prepare_enable(da8xx_ohci->usb11_clk);
+	if (ret)
+		return ret;
+
+	ret = phy_init(da8xx_ohci->usb11_phy);
+	if (ret)
+		goto err_phy_init;
+
+	ret = phy_power_on(da8xx_ohci->usb11_phy);
+	if (ret)
+		goto err_phy_power_on;
+
+	return 0;
+
+err_phy_power_on:
+	phy_exit(da8xx_ohci->usb11_phy);
+err_phy_init:
+	clk_disable_unprepare(da8xx_ohci->usb11_clk);
+
+	return ret;
+}
+
+static void ohci_da8xx_disable(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+
+	phy_power_off(da8xx_ohci->usb11_phy);
+	phy_exit(da8xx_ohci->usb11_phy);
+	clk_disable_unprepare(da8xx_ohci->usb11_clk);
+}
+
+static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+	struct device *dev = hcd->self.controller;
+	int ret;
+
+	if (!da8xx_ohci->vbus_reg)
+		return 0;
+
+	if (on) {
+		ret = regulator_enable(da8xx_ohci->vbus_reg);
+		if (ret) {
+			dev_err(dev, "Failed to enable regulator: %d\n", ret);
+			return ret;
+		}
+	} else {
+		ret = regulator_disable(da8xx_ohci->vbus_reg);
+		if (ret) {
+			dev_err(dev, "Failed  to disable regulator: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int ohci_da8xx_get_power(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+
+	if (da8xx_ohci->vbus_reg)
+		return regulator_is_enabled(da8xx_ohci->vbus_reg);
+
+	return 1;
+}
+
+static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+	unsigned int flags;
+	int ret;
+
+	if (da8xx_ohci->oc_gpio)
+		return gpiod_get_value_cansleep(da8xx_ohci->oc_gpio);
+
+	if (!da8xx_ohci->vbus_reg)
+		return 0;
+
+	ret = regulator_get_error_flags(da8xx_ohci->vbus_reg, &flags);
+	if (ret)
+		return ret;
+
+	if (flags & REGULATOR_ERROR_OVER_CURRENT)
+		return 1;
+
+	return 0;
+}
+
+static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+
+	if (da8xx_ohci->vbus_reg)
+		return 1;
+
+	return 0;
+}
+
+static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+
+	if (da8xx_ohci->oc_gpio)
+		return 1;
+
+	if (da8xx_ohci->vbus_reg)
+		return 1;
+
+	return 0;
+}
+
+static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd)
+{
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+
+	if (hub && hub->potpgt)
+		return 1;
+
+	return 0;
+}
+
+static int ohci_da8xx_regulator_event(struct notifier_block *nb,
+				unsigned long event, void *data)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci =
+				container_of(nb, struct da8xx_ohci_hcd, nb);
+
+	if (event & REGULATOR_EVENT_OVER_CURRENT) {
+		ocic_mask |= 1 << 1;
+		ohci_da8xx_set_power(da8xx_ohci->hcd, 0);
+	}
+
+	return 0;
+}
+
+static irqreturn_t ohci_da8xx_oc_thread(int irq, void *data)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = data;
+	struct device *dev = da8xx_ohci->hcd->self.controller;
+	int ret;
+
+	if (gpiod_get_value_cansleep(da8xx_ohci->oc_gpio) &&
+	    da8xx_ohci->vbus_reg) {
+		ret = regulator_disable(da8xx_ohci->vbus_reg);
+		if (ret)
+			dev_err(dev, "Failed to disable regulator: %d\n", ret);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+	struct device *dev		= hcd->self.controller;
+	int ret = 0;
+
+	if (!da8xx_ohci->oc_gpio && da8xx_ohci->vbus_reg) {
+		da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event;
+		ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg,
+						&da8xx_ohci->nb);
+	}
+
+	if (ret)
+		dev_err(dev, "Failed to register notifier: %d\n", ret);
+
+	return ret;
+}
+
+static int ohci_da8xx_reset(struct usb_hcd *hcd)
+{
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+	struct ohci_hcd	*ohci		= hcd_to_ohci(hcd);
+	int result;
+	u32 rh_a;
+
+	dev_dbg(dev, "starting USB controller\n");
+
+	result = ohci_da8xx_enable(hcd);
+	if (result < 0)
+		return result;
+
+	/*
+	 * DA8xx only have 1 port connected to the pins but the HC root hub
+	 * register A reports 2 ports, thus we'll have to override it...
+	 */
+	ohci->num_ports = 1;
+
+	result = ohci_setup(hcd);
+	if (result < 0) {
+		ohci_da8xx_disable(hcd);
+		return result;
+	}
+
+	/*
+	 * Since we're providing a board-specific root hub port power control
+	 * and over-current reporting, we have to override the HC root hub A
+	 * register's default value, so that ohci_hub_control() could return
+	 * the correct hub descriptor...
+	 */
+	rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
+	if (ohci_da8xx_has_set_power(hcd)) {
+		rh_a &= ~RH_A_NPS;
+		rh_a |=  RH_A_PSM;
+	}
+	if (ohci_da8xx_has_oci(hcd)) {
+		rh_a &= ~RH_A_NOCP;
+		rh_a |=  RH_A_OCPM;
+	}
+	if (ohci_da8xx_has_potpgt(hcd)) {
+		rh_a &= ~RH_A_POTPGT;
+		rh_a |= hub->potpgt << 24;
+	}
+	ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);
+
+	return result;
+}
+
+/*
+ * Update the status data from the hub with the over-current indicator change.
+ */
+static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	int length		= orig_ohci_hub_status_data(hcd, buf);
+
+	/* See if we have OCIC bit set on port 1 */
+	if (ocic_mask & (1 << 1)) {
+		dev_dbg(hcd->self.controller, "over-current indicator change "
+			"on port 1\n");
+
+		if (!length)
+			length = 1;
+
+		buf[0] |= 1 << 1;
+	}
+	return length;
+}
+
+/*
+ * Look at the control requests to the root hub and see if we need to override.
+ */
+static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+				  u16 wIndex, char *buf, u16 wLength)
+{
+	struct device *dev		= hcd->self.controller;
+	int temp;
+
+	switch (typeReq) {
+	case GetPortStatus:
+		/* Check the port number */
+		if (wIndex != 1)
+			break;
+
+		dev_dbg(dev, "GetPortStatus(%u)\n", wIndex);
+
+		temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1);
+
+		/* The port power status (PPS) bit defaults to 1 */
+		if (!ohci_da8xx_get_power(hcd))
+			temp &= ~RH_PS_PPS;
+
+		/* The port over-current indicator (POCI) bit is always 0 */
+		if (ohci_da8xx_get_oci(hcd) > 0)
+			temp |=  RH_PS_POCI;
+
+		/* The over-current indicator change (OCIC) bit is 0 too */
+		if (ocic_mask & (1 << wIndex))
+			temp |=  RH_PS_OCIC;
+
+		put_unaligned(cpu_to_le32(temp), (__le32 *)buf);
+		return 0;
+	case SetPortFeature:
+		temp = 1;
+		goto check_port;
+	case ClearPortFeature:
+		temp = 0;
+
+check_port:
+		/* Check the port number */
+		if (wIndex != 1)
+			break;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(dev, "%sPortFeature(%u): %s\n",
+				temp ? "Set" : "Clear", wIndex, "POWER");
+
+			return ohci_da8xx_set_power(hcd, temp) ? -EPIPE : 0;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(dev, "%sPortFeature(%u): %s\n",
+				temp ? "Set" : "Clear", wIndex,
+				"C_OVER_CURRENT");
+
+			if (temp)
+				ocic_mask |= 1 << wIndex;
+			else
+				ocic_mask &= ~(1 << wIndex);
+			return 0;
+		}
+	}
+
+	return orig_ohci_hub_control(hcd, typeReq, wValue,
+			wIndex, buf, wLength);
+}
+
+/*-------------------------------------------------------------------------*/
+#ifdef CONFIG_OF
+static const struct of_device_id da8xx_ohci_ids[] = {
+	{ .compatible = "ti,da830-ohci" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, da8xx_ohci_ids);
+#endif
+
+static int ohci_da8xx_probe(struct platform_device *pdev)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci;
+	struct device *dev = &pdev->dev;
+	int error, hcd_irq, oc_irq;
+	struct usb_hcd	*hcd;
+	struct resource *mem;
+
+	hcd = usb_create_hcd(&ohci_da8xx_hc_driver, dev, dev_name(dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	da8xx_ohci = to_da8xx_ohci(hcd);
+	da8xx_ohci->hcd = hcd;
+
+	da8xx_ohci->usb11_clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(da8xx_ohci->usb11_clk)) {
+		error = PTR_ERR(da8xx_ohci->usb11_clk);
+		if (error != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get clock.\n");
+		goto err;
+	}
+
+	da8xx_ohci->usb11_phy = devm_phy_get(dev, "usb-phy");
+	if (IS_ERR(da8xx_ohci->usb11_phy)) {
+		error = PTR_ERR(da8xx_ohci->usb11_phy);
+		if (error != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get phy.\n");
+		goto err;
+	}
+
+	da8xx_ohci->vbus_reg = devm_regulator_get_optional(dev, "vbus");
+	if (IS_ERR(da8xx_ohci->vbus_reg)) {
+		error = PTR_ERR(da8xx_ohci->vbus_reg);
+		if (error == -ENODEV) {
+			da8xx_ohci->vbus_reg = NULL;
+		} else if (error == -EPROBE_DEFER) {
+			goto err;
+		} else {
+			dev_err(dev, "Failed to get regulator\n");
+			goto err;
+		}
+	}
+
+	da8xx_ohci->oc_gpio = devm_gpiod_get_optional(dev, "oc", GPIOD_IN);
+	if (IS_ERR(da8xx_ohci->oc_gpio)) {
+		error = PTR_ERR(da8xx_ohci->oc_gpio);
+		goto err;
+	}
+
+	if (da8xx_ohci->oc_gpio) {
+		oc_irq = gpiod_to_irq(da8xx_ohci->oc_gpio);
+		if (oc_irq < 0) {
+			error = oc_irq;
+			goto err;
+		}
+
+		error = devm_request_threaded_irq(dev, oc_irq, NULL,
+				ohci_da8xx_oc_thread, IRQF_TRIGGER_RISING |
+				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				"OHCI over-current indicator", da8xx_ohci);
+		if (error)
+			goto err;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(hcd->regs)) {
+		error = PTR_ERR(hcd->regs);
+		goto err;
+	}
+	hcd->rsrc_start = mem->start;
+	hcd->rsrc_len = resource_size(mem);
+
+	hcd_irq = platform_get_irq(pdev, 0);
+	if (hcd_irq < 0) {
+		error = -ENODEV;
+		goto err;
+	}
+
+	error = usb_add_hcd(hcd, hcd_irq, 0);
+	if (error)
+		goto err;
+
+	device_wakeup_enable(hcd->self.controller);
+
+	error = ohci_da8xx_register_notify(hcd);
+	if (error)
+		goto err_remove_hcd;
+
+	return 0;
+
+err_remove_hcd:
+	usb_remove_hcd(hcd);
+err:
+	usb_put_hcd(hcd);
+	return error;
+}
+
+static int ohci_da8xx_remove(struct platform_device *pdev)
+{
+	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ohci_da8xx_suspend(struct platform_device *pdev,
+				pm_message_t message)
+{
+	struct usb_hcd	*hcd	= platform_get_drvdata(pdev);
+	struct ohci_hcd	*ohci	= hcd_to_ohci(hcd);
+	bool		do_wakeup	= device_may_wakeup(&pdev->dev);
+	int		ret;
+
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ret = ohci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+
+	ohci_da8xx_disable(hcd);
+	hcd->state = HC_STATE_SUSPENDED;
+
+	return ret;
+}
+
+static int ohci_da8xx_resume(struct platform_device *dev)
+{
+	struct usb_hcd	*hcd	= platform_get_drvdata(dev);
+	struct ohci_hcd	*ohci	= hcd_to_ohci(hcd);
+	int ret;
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ret = ohci_da8xx_enable(hcd);
+	if (ret)
+		return ret;
+
+	ohci_resume(hcd, false);
+
+	return 0;
+}
+#endif
+
+static const struct ohci_driver_overrides da8xx_overrides __initconst = {
+	.reset		 = ohci_da8xx_reset,
+	.extra_priv_size = sizeof(struct da8xx_ohci_hcd),
+};
+
+/*
+ * Driver definition to register with platform structure.
+ */
+static struct platform_driver ohci_hcd_da8xx_driver = {
+	.probe		= ohci_da8xx_probe,
+	.remove		= ohci_da8xx_remove,
+	.shutdown 	= usb_hcd_platform_shutdown,
+#ifdef	CONFIG_PM
+	.suspend	= ohci_da8xx_suspend,
+	.resume		= ohci_da8xx_resume,
+#endif
+	.driver		= {
+		.name	= DRV_NAME,
+		.of_match_table = of_match_ptr(da8xx_ohci_ids),
+	},
+};
+
+static int __init ohci_da8xx_init(void)
+{
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides);
+
+	/*
+	 * The Davinci da8xx HW has some unusual quirks, which require
+	 * da8xx-specific workarounds. We override certain hc_driver
+	 * functions here to achieve that. We explicitly do not enhance
+	 * ohci_driver_overrides to allow this more easily, since this
+	 * is an unusual case, and we don't want to encourage others to
+	 * override these functions by making it too easy.
+	 */
+
+	orig_ohci_hub_control = ohci_da8xx_hc_driver.hub_control;
+	orig_ohci_hub_status_data = ohci_da8xx_hc_driver.hub_status_data;
+
+	ohci_da8xx_hc_driver.hub_status_data     = ohci_da8xx_hub_status_data;
+	ohci_da8xx_hc_driver.hub_control         = ohci_da8xx_hub_control;
+
+	return platform_driver_register(&ohci_hcd_da8xx_driver);
+}
+module_init(ohci_da8xx_init);
+
+static void __exit ohci_da8xx_exit(void)
+{
+	platform_driver_unregister(&ohci_hcd_da8xx_driver);
+}
+module_exit(ohci_da8xx_exit);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
new file mode 100644
index 000000000..76bc8d563
--- /dev/null
+++ b/drivers/usb/host/ohci-dbg.c
@@ -0,0 +1,785 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * This file is licenced under the GPL.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+#define edstring(ed_type) ({ char *temp; \
+	switch (ed_type) { \
+	case PIPE_CONTROL:	temp = "ctrl"; break; \
+	case PIPE_BULK:		temp = "bulk"; break; \
+	case PIPE_INTERRUPT:	temp = "intr"; break; \
+	default:		temp = "isoc"; break; \
+	} temp;})
+#define pipestring(pipe) edstring(usb_pipetype(pipe))
+
+
+#define ohci_dbg_sw(ohci, next, size, format, arg...) \
+	do { \
+	if (next != NULL) { \
+		unsigned s_len; \
+		s_len = scnprintf (*next, *size, format, ## arg ); \
+		*size -= s_len; *next += s_len; \
+	} else \
+		ohci_dbg(ohci,format, ## arg ); \
+	} while (0);
+
+/* Version for use where "next" is the address of a local variable */
+#define ohci_dbg_nosw(ohci, next, size, format, arg...) \
+	do { \
+		unsigned s_len; \
+		s_len = scnprintf(*next, *size, format, ## arg); \
+		*size -= s_len; *next += s_len; \
+	} while (0);
+
+
+static void ohci_dump_intr_mask (
+	struct ohci_hcd *ohci,
+	char *label,
+	u32 mask,
+	char **next,
+	unsigned *size)
+{
+	ohci_dbg_sw (ohci, next, size, "%s 0x%08x%s%s%s%s%s%s%s%s%s\n",
+		label,
+		mask,
+		(mask & OHCI_INTR_MIE) ? " MIE" : "",
+		(mask & OHCI_INTR_OC) ? " OC" : "",
+		(mask & OHCI_INTR_RHSC) ? " RHSC" : "",
+		(mask & OHCI_INTR_FNO) ? " FNO" : "",
+		(mask & OHCI_INTR_UE) ? " UE" : "",
+		(mask & OHCI_INTR_RD) ? " RD" : "",
+		(mask & OHCI_INTR_SF) ? " SF" : "",
+		(mask & OHCI_INTR_WDH) ? " WDH" : "",
+		(mask & OHCI_INTR_SO) ? " SO" : ""
+		);
+}
+
+static void maybe_print_eds (
+	struct ohci_hcd *ohci,
+	char *label,
+	u32 value,
+	char **next,
+	unsigned *size)
+{
+	if (value)
+		ohci_dbg_sw (ohci, next, size, "%s %08x\n", label, value);
+}
+
+static char *hcfs2string (int state)
+{
+	switch (state) {
+		case OHCI_USB_RESET:	return "reset";
+		case OHCI_USB_RESUME:	return "resume";
+		case OHCI_USB_OPER:	return "operational";
+		case OHCI_USB_SUSPEND:	return "suspend";
+	}
+	return "?";
+}
+
+static const char *rh_state_string(struct ohci_hcd *ohci)
+{
+	switch (ohci->rh_state) {
+	case OHCI_RH_HALTED:
+		return "halted";
+	case OHCI_RH_SUSPENDED:
+		return "suspended";
+	case OHCI_RH_RUNNING:
+		return "running";
+	}
+	return "?";
+}
+
+// dump control and status registers
+static void
+ohci_dump_status (struct ohci_hcd *controller, char **next, unsigned *size)
+{
+	struct ohci_regs __iomem *regs = controller->regs;
+	u32			temp;
+
+	temp = ohci_readl (controller, &regs->revision) & 0xff;
+	ohci_dbg_sw (controller, next, size,
+		"OHCI %d.%d, %s legacy support registers, rh state %s\n",
+		0x03 & (temp >> 4), (temp & 0x0f),
+		(temp & 0x0100) ? "with" : "NO",
+		rh_state_string(controller));
+
+	temp = ohci_readl (controller, &regs->control);
+	ohci_dbg_sw (controller, next, size,
+		"control 0x%03x%s%s%s HCFS=%s%s%s%s%s CBSR=%d\n",
+		temp,
+		(temp & OHCI_CTRL_RWE) ? " RWE" : "",
+		(temp & OHCI_CTRL_RWC) ? " RWC" : "",
+		(temp & OHCI_CTRL_IR) ? " IR" : "",
+		hcfs2string (temp & OHCI_CTRL_HCFS),
+		(temp & OHCI_CTRL_BLE) ? " BLE" : "",
+		(temp & OHCI_CTRL_CLE) ? " CLE" : "",
+		(temp & OHCI_CTRL_IE) ? " IE" : "",
+		(temp & OHCI_CTRL_PLE) ? " PLE" : "",
+		temp & OHCI_CTRL_CBSR
+		);
+
+	temp = ohci_readl (controller, &regs->cmdstatus);
+	ohci_dbg_sw (controller, next, size,
+		"cmdstatus 0x%05x SOC=%d%s%s%s%s\n", temp,
+		(temp & OHCI_SOC) >> 16,
+		(temp & OHCI_OCR) ? " OCR" : "",
+		(temp & OHCI_BLF) ? " BLF" : "",
+		(temp & OHCI_CLF) ? " CLF" : "",
+		(temp & OHCI_HCR) ? " HCR" : ""
+		);
+
+	ohci_dump_intr_mask (controller, "intrstatus",
+			ohci_readl (controller, &regs->intrstatus),
+			next, size);
+	ohci_dump_intr_mask (controller, "intrenable",
+			ohci_readl (controller, &regs->intrenable),
+			next, size);
+	// intrdisable always same as intrenable
+
+	maybe_print_eds (controller, "ed_periodcurrent",
+			ohci_readl (controller, &regs->ed_periodcurrent),
+			next, size);
+
+	maybe_print_eds (controller, "ed_controlhead",
+			ohci_readl (controller, &regs->ed_controlhead),
+			next, size);
+	maybe_print_eds (controller, "ed_controlcurrent",
+			ohci_readl (controller, &regs->ed_controlcurrent),
+			next, size);
+
+	maybe_print_eds (controller, "ed_bulkhead",
+			ohci_readl (controller, &regs->ed_bulkhead),
+			next, size);
+	maybe_print_eds (controller, "ed_bulkcurrent",
+			ohci_readl (controller, &regs->ed_bulkcurrent),
+			next, size);
+
+	maybe_print_eds (controller, "donehead",
+			ohci_readl (controller, &regs->donehead), next, size);
+}
+
+#define dbg_port_sw(hc,num,value,next,size) \
+	ohci_dbg_sw (hc, next, size, \
+		"roothub.portstatus [%d] " \
+		"0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
+		num, temp, \
+		(temp & RH_PS_PRSC) ? " PRSC" : "", \
+		(temp & RH_PS_OCIC) ? " OCIC" : "", \
+		(temp & RH_PS_PSSC) ? " PSSC" : "", \
+		(temp & RH_PS_PESC) ? " PESC" : "", \
+		(temp & RH_PS_CSC) ? " CSC" : "", \
+		\
+		(temp & RH_PS_LSDA) ? " LSDA" : "", \
+		(temp & RH_PS_PPS) ? " PPS" : "", \
+		(temp & RH_PS_PRS) ? " PRS" : "", \
+		(temp & RH_PS_POCI) ? " POCI" : "", \
+		(temp & RH_PS_PSS) ? " PSS" : "", \
+		\
+		(temp & RH_PS_PES) ? " PES" : "", \
+		(temp & RH_PS_CCS) ? " CCS" : "" \
+		);
+
+
+static void
+ohci_dump_roothub (
+	struct ohci_hcd *controller,
+	int verbose,
+	char **next,
+	unsigned *size)
+{
+	u32			temp, i;
+
+	temp = roothub_a (controller);
+	if (temp == ~(u32)0)
+		return;
+
+	if (verbose) {
+		ohci_dbg_sw (controller, next, size,
+			"roothub.a %08x POTPGT=%d%s%s%s%s%s NDP=%d(%d)\n", temp,
+			((temp & RH_A_POTPGT) >> 24) & 0xff,
+			(temp & RH_A_NOCP) ? " NOCP" : "",
+			(temp & RH_A_OCPM) ? " OCPM" : "",
+			(temp & RH_A_DT) ? " DT" : "",
+			(temp & RH_A_NPS) ? " NPS" : "",
+			(temp & RH_A_PSM) ? " PSM" : "",
+			(temp & RH_A_NDP), controller->num_ports
+			);
+		temp = roothub_b (controller);
+		ohci_dbg_sw (controller, next, size,
+			"roothub.b %08x PPCM=%04x DR=%04x\n",
+			temp,
+			(temp & RH_B_PPCM) >> 16,
+			(temp & RH_B_DR)
+			);
+		temp = roothub_status (controller);
+		ohci_dbg_sw (controller, next, size,
+			"roothub.status %08x%s%s%s%s%s%s\n",
+			temp,
+			(temp & RH_HS_CRWE) ? " CRWE" : "",
+			(temp & RH_HS_OCIC) ? " OCIC" : "",
+			(temp & RH_HS_LPSC) ? " LPSC" : "",
+			(temp & RH_HS_DRWE) ? " DRWE" : "",
+			(temp & RH_HS_OCI) ? " OCI" : "",
+			(temp & RH_HS_LPS) ? " LPS" : ""
+			);
+	}
+
+	for (i = 0; i < controller->num_ports; i++) {
+		temp = roothub_portstatus (controller, i);
+		dbg_port_sw (controller, i, temp, next, size);
+	}
+}
+
+static void ohci_dump(struct ohci_hcd *controller)
+{
+	ohci_dbg (controller, "OHCI controller state\n");
+
+	// dumps some of the state we know about
+	ohci_dump_status (controller, NULL, NULL);
+	if (controller->hcca)
+		ohci_dbg (controller,
+			"hcca frame #%04x\n", ohci_frame_no(controller));
+	ohci_dump_roothub (controller, 1, NULL, NULL);
+}
+
+static const char data0 [] = "DATA0";
+static const char data1 [] = "DATA1";
+
+static void ohci_dump_td (const struct ohci_hcd *ohci, const char *label,
+		const struct td *td)
+{
+	u32	tmp = hc32_to_cpup (ohci, &td->hwINFO);
+
+	ohci_dbg (ohci, "%s td %p%s; urb %p index %d; hw next td %08x\n",
+		label, td,
+		(tmp & TD_DONE) ? " (DONE)" : "",
+		td->urb, td->index,
+		hc32_to_cpup (ohci, &td->hwNextTD));
+	if ((tmp & TD_ISO) == 0) {
+		const char	*toggle, *pid;
+		u32	cbp, be;
+
+		switch (tmp & TD_T) {
+		case TD_T_DATA0: toggle = data0; break;
+		case TD_T_DATA1: toggle = data1; break;
+		case TD_T_TOGGLE: toggle = "(CARRY)"; break;
+		default: toggle = "(?)"; break;
+		}
+		switch (tmp & TD_DP) {
+		case TD_DP_SETUP: pid = "SETUP"; break;
+		case TD_DP_IN: pid = "IN"; break;
+		case TD_DP_OUT: pid = "OUT"; break;
+		default: pid = "(bad pid)"; break;
+		}
+		ohci_dbg (ohci, "     info %08x CC=%x %s DI=%d %s %s\n", tmp,
+			TD_CC_GET(tmp), /* EC, */ toggle,
+			(tmp & TD_DI) >> 21, pid,
+			(tmp & TD_R) ? "R" : "");
+		cbp = hc32_to_cpup (ohci, &td->hwCBP);
+		be = hc32_to_cpup (ohci, &td->hwBE);
+		ohci_dbg (ohci, "     cbp %08x be %08x (len %d)\n", cbp, be,
+			cbp ? (be + 1 - cbp) : 0);
+	} else {
+		unsigned	i;
+		ohci_dbg (ohci, "  info %08x CC=%x FC=%d DI=%d SF=%04x\n", tmp,
+			TD_CC_GET(tmp),
+			(tmp >> 24) & 0x07,
+			(tmp & TD_DI) >> 21,
+			tmp & 0x0000ffff);
+		ohci_dbg (ohci, "  bp0 %08x be %08x\n",
+			hc32_to_cpup (ohci, &td->hwCBP) & ~0x0fff,
+			hc32_to_cpup (ohci, &td->hwBE));
+		for (i = 0; i < MAXPSW; i++) {
+			u16	psw = ohci_hwPSW (ohci, td, i);
+			int	cc = (psw >> 12) & 0x0f;
+			ohci_dbg (ohci, "    psw [%d] = %2x, CC=%x %s=%d\n", i,
+				psw, cc,
+				(cc >= 0x0e) ? "OFFSET" : "SIZE",
+				psw & 0x0fff);
+		}
+	}
+}
+
+/* caller MUST own hcd spinlock if verbose is set! */
+static void __maybe_unused
+ohci_dump_ed (const struct ohci_hcd *ohci, const char *label,
+		const struct ed *ed, int verbose)
+{
+	u32	tmp = hc32_to_cpu (ohci, ed->hwINFO);
+	char	*type = "";
+
+	ohci_dbg (ohci, "%s, ed %p state 0x%x type %s; next ed %08x\n",
+		label,
+		ed, ed->state, edstring (ed->type),
+		hc32_to_cpup (ohci, &ed->hwNextED));
+	switch (tmp & (ED_IN|ED_OUT)) {
+	case ED_OUT: type = "-OUT"; break;
+	case ED_IN: type = "-IN"; break;
+	/* else from TDs ... control */
+	}
+	ohci_dbg (ohci,
+		"  info %08x MAX=%d%s%s%s%s EP=%d%s DEV=%d\n", tmp,
+		0x03ff & (tmp >> 16),
+		(tmp & ED_DEQUEUE) ? " DQ" : "",
+		(tmp & ED_ISO) ? " ISO" : "",
+		(tmp & ED_SKIP) ? " SKIP" : "",
+		(tmp & ED_LOWSPEED) ? " LOW" : "",
+		0x000f & (tmp >> 7),
+		type,
+		0x007f & tmp);
+	tmp = hc32_to_cpup (ohci, &ed->hwHeadP);
+	ohci_dbg (ohci, "  tds: head %08x %s%s tail %08x%s\n",
+		tmp,
+		(tmp & ED_C) ? data1 : data0,
+		(tmp & ED_H) ? " HALT" : "",
+		hc32_to_cpup (ohci, &ed->hwTailP),
+		verbose ? "" : " (not listing)");
+	if (verbose) {
+		struct list_head	*tmp;
+
+		/* use ed->td_list because HC concurrently modifies
+		 * hwNextTD as it accumulates ed_donelist.
+		 */
+		list_for_each (tmp, &ed->td_list) {
+			struct td		*td;
+			td = list_entry (tmp, struct td, td_list);
+			ohci_dump_td (ohci, "  ->", td);
+		}
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int debug_async_open(struct inode *, struct file *);
+static int debug_periodic_open(struct inode *, struct file *);
+static int debug_registers_open(struct inode *, struct file *);
+static int debug_async_open(struct inode *, struct file *);
+static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*);
+static int debug_close(struct inode *, struct file *);
+
+static const struct file_operations debug_async_fops = {
+	.owner		= THIS_MODULE,
+	.open		= debug_async_open,
+	.read		= debug_output,
+	.release	= debug_close,
+	.llseek		= default_llseek,
+};
+static const struct file_operations debug_periodic_fops = {
+	.owner		= THIS_MODULE,
+	.open		= debug_periodic_open,
+	.read		= debug_output,
+	.release	= debug_close,
+	.llseek		= default_llseek,
+};
+static const struct file_operations debug_registers_fops = {
+	.owner		= THIS_MODULE,
+	.open		= debug_registers_open,
+	.read		= debug_output,
+	.release	= debug_close,
+	.llseek		= default_llseek,
+};
+
+static struct dentry *ohci_debug_root;
+
+struct debug_buffer {
+	ssize_t (*fill_func)(struct debug_buffer *);	/* fill method */
+	struct ohci_hcd *ohci;
+	struct mutex mutex;	/* protect filling of buffer */
+	size_t count;		/* number of characters filled into buffer */
+	char *page;
+};
+
+static ssize_t
+show_list (struct ohci_hcd *ohci, char *buf, size_t count, struct ed *ed)
+{
+	unsigned		temp, size = count;
+
+	if (!ed)
+		return 0;
+
+	/* print first --> last */
+	while (ed->ed_prev)
+		ed = ed->ed_prev;
+
+	/* dump a snapshot of the bulk or control schedule */
+	while (ed) {
+		u32		info = hc32_to_cpu (ohci, ed->hwINFO);
+		u32		headp = hc32_to_cpu (ohci, ed->hwHeadP);
+		struct list_head *entry;
+		struct td	*td;
+
+		temp = scnprintf (buf, size,
+			"ed/%p %cs dev%d ep%d%s max %d %08x%s%s %s",
+			ed,
+			(info & ED_LOWSPEED) ? 'l' : 'f',
+			info & 0x7f,
+			(info >> 7) & 0xf,
+			(info & ED_IN) ? "in" : "out",
+			0x03ff & (info >> 16),
+			info,
+			(info & ED_SKIP) ? " s" : "",
+			(headp & ED_H) ? " H" : "",
+			(headp & ED_C) ? data1 : data0);
+		size -= temp;
+		buf += temp;
+
+		list_for_each (entry, &ed->td_list) {
+			u32		cbp, be;
+
+			td = list_entry (entry, struct td, td_list);
+			info = hc32_to_cpup (ohci, &td->hwINFO);
+			cbp = hc32_to_cpup (ohci, &td->hwCBP);
+			be = hc32_to_cpup (ohci, &td->hwBE);
+			temp = scnprintf (buf, size,
+					"\n\ttd %p %s %d cc=%x urb %p (%08x)",
+					td,
+					({ char *pid;
+					switch (info & TD_DP) {
+					case TD_DP_SETUP: pid = "setup"; break;
+					case TD_DP_IN: pid = "in"; break;
+					case TD_DP_OUT: pid = "out"; break;
+					default: pid = "(?)"; break;
+					 } pid;}),
+					cbp ? (be + 1 - cbp) : 0,
+					TD_CC_GET (info), td->urb, info);
+			size -= temp;
+			buf += temp;
+		}
+
+		temp = scnprintf (buf, size, "\n");
+		size -= temp;
+		buf += temp;
+
+		ed = ed->ed_next;
+	}
+	return count - size;
+}
+
+static ssize_t fill_async_buffer(struct debug_buffer *buf)
+{
+	struct ohci_hcd		*ohci;
+	size_t			temp, size;
+	unsigned long		flags;
+
+	ohci = buf->ohci;
+	size = PAGE_SIZE;
+
+	/* display control and bulk lists together, for simplicity */
+	spin_lock_irqsave (&ohci->lock, flags);
+	temp = show_list(ohci, buf->page, size, ohci->ed_controltail);
+	temp += show_list(ohci, buf->page + temp, size - temp,
+			  ohci->ed_bulktail);
+	spin_unlock_irqrestore (&ohci->lock, flags);
+
+	return temp;
+}
+
+#define DBG_SCHED_LIMIT 64
+
+static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
+{
+	struct ohci_hcd		*ohci;
+	struct ed		**seen, *ed;
+	unsigned long		flags;
+	unsigned		temp, size, seen_count;
+	char			*next;
+	unsigned		i;
+
+	seen = kmalloc_array(DBG_SCHED_LIMIT, sizeof(*seen), GFP_ATOMIC);
+	if (!seen)
+		return 0;
+	seen_count = 0;
+
+	ohci = buf->ohci;
+	next = buf->page;
+	size = PAGE_SIZE;
+
+	temp = scnprintf (next, size, "size = %d\n", NUM_INTS);
+	size -= temp;
+	next += temp;
+
+	/* dump a snapshot of the periodic schedule (and load) */
+	spin_lock_irqsave (&ohci->lock, flags);
+	for (i = 0; i < NUM_INTS; i++) {
+		ed = ohci->periodic[i];
+		if (!ed)
+			continue;
+
+		temp = scnprintf (next, size, "%2d [%3d]:", i, ohci->load [i]);
+		size -= temp;
+		next += temp;
+
+		do {
+			temp = scnprintf (next, size, " ed%d/%p",
+				ed->interval, ed);
+			size -= temp;
+			next += temp;
+			for (temp = 0; temp < seen_count; temp++) {
+				if (seen [temp] == ed)
+					break;
+			}
+
+			/* show more info the first time around */
+			if (temp == seen_count) {
+				u32	info = hc32_to_cpu (ohci, ed->hwINFO);
+				struct list_head	*entry;
+				unsigned		qlen = 0;
+
+				/* qlen measured here in TDs, not urbs */
+				list_for_each (entry, &ed->td_list)
+					qlen++;
+
+				temp = scnprintf (next, size,
+					" (%cs dev%d ep%d%s-%s qlen %u"
+					" max %d %08x%s%s)",
+					(info & ED_LOWSPEED) ? 'l' : 'f',
+					info & 0x7f,
+					(info >> 7) & 0xf,
+					(info & ED_IN) ? "in" : "out",
+					(info & ED_ISO) ? "iso" : "int",
+					qlen,
+					0x03ff & (info >> 16),
+					info,
+					(info & ED_SKIP) ? " K" : "",
+					(ed->hwHeadP &
+						cpu_to_hc32(ohci, ED_H)) ?
+							" H" : "");
+				size -= temp;
+				next += temp;
+
+				if (seen_count < DBG_SCHED_LIMIT)
+					seen [seen_count++] = ed;
+
+				ed = ed->ed_next;
+
+			} else {
+				/* we've seen it and what's after */
+				temp = 0;
+				ed = NULL;
+			}
+
+		} while (ed);
+
+		temp = scnprintf (next, size, "\n");
+		size -= temp;
+		next += temp;
+	}
+	spin_unlock_irqrestore (&ohci->lock, flags);
+	kfree (seen);
+
+	return PAGE_SIZE - size;
+}
+#undef DBG_SCHED_LIMIT
+
+static ssize_t fill_registers_buffer(struct debug_buffer *buf)
+{
+	struct usb_hcd		*hcd;
+	struct ohci_hcd		*ohci;
+	struct ohci_regs __iomem *regs;
+	unsigned long		flags;
+	unsigned		temp, size;
+	char			*next;
+	u32			rdata;
+
+	ohci = buf->ohci;
+	hcd = ohci_to_hcd(ohci);
+	regs = ohci->regs;
+	next = buf->page;
+	size = PAGE_SIZE;
+
+	spin_lock_irqsave (&ohci->lock, flags);
+
+	/* dump driver info, then registers in spec order */
+
+	ohci_dbg_nosw(ohci, &next, &size,
+		"bus %s, device %s\n"
+		"%s\n"
+		"%s\n",
+		hcd->self.controller->bus->name,
+		dev_name(hcd->self.controller),
+		hcd->product_desc,
+		hcd_name);
+
+	if (!HCD_HW_ACCESSIBLE(hcd)) {
+		size -= scnprintf (next, size,
+			"SUSPENDED (no register access)\n");
+		goto done;
+	}
+
+	ohci_dump_status(ohci, &next, &size);
+
+	/* hcca */
+	if (ohci->hcca)
+		ohci_dbg_nosw(ohci, &next, &size,
+			"hcca frame 0x%04x\n", ohci_frame_no(ohci));
+
+	/* other registers mostly affect frame timings */
+	rdata = ohci_readl (ohci, &regs->fminterval);
+	temp = scnprintf (next, size,
+			"fmintvl 0x%08x %sFSMPS=0x%04x FI=0x%04x\n",
+			rdata, (rdata >> 31) ? "FIT " : "",
+			(rdata >> 16) & 0xefff, rdata & 0xffff);
+	size -= temp;
+	next += temp;
+
+	rdata = ohci_readl (ohci, &regs->fmremaining);
+	temp = scnprintf (next, size, "fmremaining 0x%08x %sFR=0x%04x\n",
+			rdata, (rdata >> 31) ? "FRT " : "",
+			rdata & 0x3fff);
+	size -= temp;
+	next += temp;
+
+	rdata = ohci_readl (ohci, &regs->periodicstart);
+	temp = scnprintf (next, size, "periodicstart 0x%04x\n",
+			rdata & 0x3fff);
+	size -= temp;
+	next += temp;
+
+	rdata = ohci_readl (ohci, &regs->lsthresh);
+	temp = scnprintf (next, size, "lsthresh 0x%04x\n",
+			rdata & 0x3fff);
+	size -= temp;
+	next += temp;
+
+	temp = scnprintf (next, size, "hub poll timer %s\n",
+			HCD_POLL_RH(ohci_to_hcd(ohci)) ? "ON" : "off");
+	size -= temp;
+	next += temp;
+
+	/* roothub */
+	ohci_dump_roothub (ohci, 1, &next, &size);
+
+done:
+	spin_unlock_irqrestore (&ohci->lock, flags);
+
+	return PAGE_SIZE - size;
+}
+
+static struct debug_buffer *alloc_buffer(struct ohci_hcd *ohci,
+				ssize_t (*fill_func)(struct debug_buffer *))
+{
+	struct debug_buffer *buf;
+
+	buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
+
+	if (buf) {
+		buf->ohci = ohci;
+		buf->fill_func = fill_func;
+		mutex_init(&buf->mutex);
+	}
+
+	return buf;
+}
+
+static int fill_buffer(struct debug_buffer *buf)
+{
+	int ret;
+
+	if (!buf->page)
+		buf->page = (char *)get_zeroed_page(GFP_KERNEL);
+
+	if (!buf->page) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = buf->fill_func(buf);
+
+	if (ret >= 0) {
+		buf->count = ret;
+		ret = 0;
+	}
+
+out:
+	return ret;
+}
+
+static ssize_t debug_output(struct file *file, char __user *user_buf,
+			size_t len, loff_t *offset)
+{
+	struct debug_buffer *buf = file->private_data;
+	int ret;
+
+	mutex_lock(&buf->mutex);
+	if (buf->count == 0) {
+		ret = fill_buffer(buf);
+		if (ret != 0) {
+			mutex_unlock(&buf->mutex);
+			goto out;
+		}
+	}
+	mutex_unlock(&buf->mutex);
+
+	ret = simple_read_from_buffer(user_buf, len, offset,
+				      buf->page, buf->count);
+
+out:
+	return ret;
+
+}
+
+static int debug_close(struct inode *inode, struct file *file)
+{
+	struct debug_buffer *buf = file->private_data;
+
+	if (buf) {
+		if (buf->page)
+			free_page((unsigned long)buf->page);
+		kfree(buf);
+	}
+
+	return 0;
+}
+static int debug_async_open(struct inode *inode, struct file *file)
+{
+	file->private_data = alloc_buffer(inode->i_private, fill_async_buffer);
+
+	return file->private_data ? 0 : -ENOMEM;
+}
+
+static int debug_periodic_open(struct inode *inode, struct file *file)
+{
+	file->private_data = alloc_buffer(inode->i_private,
+					  fill_periodic_buffer);
+
+	return file->private_data ? 0 : -ENOMEM;
+}
+
+static int debug_registers_open(struct inode *inode, struct file *file)
+{
+	file->private_data = alloc_buffer(inode->i_private,
+					  fill_registers_buffer);
+
+	return file->private_data ? 0 : -ENOMEM;
+}
+static inline void create_debug_files (struct ohci_hcd *ohci)
+{
+	struct usb_bus *bus = &ohci_to_hcd(ohci)->self;
+	struct dentry *root;
+
+	root = debugfs_create_dir(bus->bus_name, ohci_debug_root);
+	ohci->debug_dir = root;
+
+	debugfs_create_file("async", S_IRUGO, root, ohci, &debug_async_fops);
+	debugfs_create_file("periodic", S_IRUGO, root, ohci,
+			    &debug_periodic_fops);
+	debugfs_create_file("registers", S_IRUGO, root, ohci,
+			    &debug_registers_fops);
+
+	ohci_dbg (ohci, "created debug files\n");
+}
+
+static inline void remove_debug_files (struct ohci_hcd *ohci)
+{
+	debugfs_remove_recursive(ohci->debug_dir);
+}
+
+/*-------------------------------------------------------------------------*/
+
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
new file mode 100644
index 000000000..8d7977fd5
--- /dev/null
+++ b/drivers/usb/host/ohci-exynos.c
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * SAMSUNG EXYNOS USB HOST OHCI Controller
+ *
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+
+#define DRIVER_DESC "OHCI Exynos driver"
+
+static struct hc_driver __read_mostly exynos_ohci_hc_driver;
+
+#define to_exynos_ohci(hcd) (struct exynos_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
+
+#define PHY_NUMBER 3
+
+struct exynos_ohci_hcd {
+	struct clk *clk;
+	struct device_node *of_node;
+	struct phy *phy[PHY_NUMBER];
+	bool legacy_phy;
+};
+
+static int exynos_ohci_get_phy(struct device *dev,
+				struct exynos_ohci_hcd *exynos_ohci)
+{
+	struct device_node *child;
+	struct phy *phy;
+	int phy_number, num_phys;
+	int ret;
+
+	/* Get PHYs for the controller */
+	num_phys = of_count_phandle_with_args(dev->of_node, "phys",
+					      "#phy-cells");
+	for (phy_number = 0; phy_number < num_phys; phy_number++) {
+		phy = devm_of_phy_get_by_index(dev, dev->of_node, phy_number);
+		if (IS_ERR(phy))
+			return PTR_ERR(phy);
+		exynos_ohci->phy[phy_number] = phy;
+	}
+	if (num_phys > 0)
+		return 0;
+
+	/* Get PHYs using legacy bindings */
+	for_each_available_child_of_node(dev->of_node, child) {
+		ret = of_property_read_u32(child, "reg", &phy_number);
+		if (ret) {
+			dev_err(dev, "Failed to parse device tree\n");
+			of_node_put(child);
+			return ret;
+		}
+
+		if (phy_number >= PHY_NUMBER) {
+			dev_err(dev, "Invalid number of PHYs\n");
+			of_node_put(child);
+			return -EINVAL;
+		}
+
+		phy = devm_of_phy_get(dev, child, NULL);
+		exynos_ohci->phy[phy_number] = phy;
+		if (IS_ERR(phy)) {
+			ret = PTR_ERR(phy);
+			if (ret == -EPROBE_DEFER) {
+				of_node_put(child);
+				return ret;
+			} else if (ret != -ENOSYS && ret != -ENODEV) {
+				dev_err(dev,
+					"Error retrieving usb2 phy: %d\n", ret);
+				of_node_put(child);
+				return ret;
+			}
+		}
+	}
+
+	exynos_ohci->legacy_phy = true;
+	return 0;
+}
+
+static int exynos_ohci_phy_enable(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
+	int i;
+	int ret = 0;
+
+	for (i = 0; ret == 0 && i < PHY_NUMBER; i++)
+		if (!IS_ERR(exynos_ohci->phy[i]))
+			ret = phy_power_on(exynos_ohci->phy[i]);
+	if (ret)
+		for (i--; i >= 0; i--)
+			if (!IS_ERR(exynos_ohci->phy[i]))
+				phy_power_off(exynos_ohci->phy[i]);
+
+	return ret;
+}
+
+static void exynos_ohci_phy_disable(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
+	int i;
+
+	for (i = 0; i < PHY_NUMBER; i++)
+		if (!IS_ERR(exynos_ohci->phy[i]))
+			phy_power_off(exynos_ohci->phy[i]);
+}
+
+static int exynos_ohci_probe(struct platform_device *pdev)
+{
+	struct exynos_ohci_hcd *exynos_ohci;
+	struct usb_hcd *hcd;
+	struct resource *res;
+	int irq;
+	int err;
+
+	/*
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we move to full device tree support this will vanish off.
+	 */
+	err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (err)
+		return err;
+
+	hcd = usb_create_hcd(&exynos_ohci_hc_driver,
+				&pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		dev_err(&pdev->dev, "Unable to create HCD\n");
+		return -ENOMEM;
+	}
+
+	exynos_ohci = to_exynos_ohci(hcd);
+
+	err = exynos_ohci_get_phy(&pdev->dev, exynos_ohci);
+	if (err)
+		goto fail_clk;
+
+	exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost");
+
+	if (IS_ERR(exynos_ohci->clk)) {
+		dev_err(&pdev->dev, "Failed to get usbhost clock\n");
+		err = PTR_ERR(exynos_ohci->clk);
+		goto fail_clk;
+	}
+
+	err = clk_prepare_enable(exynos_ohci->clk);
+	if (err)
+		goto fail_clk;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(hcd->regs)) {
+		err = PTR_ERR(hcd->regs);
+		goto fail_io;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		err = irq;
+		goto fail_io;
+	}
+
+	platform_set_drvdata(pdev, hcd);
+
+	err = exynos_ohci_phy_enable(&pdev->dev);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to enable USB phy\n");
+		goto fail_io;
+	}
+
+	/*
+	 * Workaround: reset of_node pointer to avoid conflict between legacy
+	 * Exynos OHCI port subnodes and generic USB device bindings
+	 */
+	exynos_ohci->of_node = pdev->dev.of_node;
+	if (exynos_ohci->legacy_phy)
+		pdev->dev.of_node = NULL;
+
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to add USB HCD\n");
+		goto fail_add_hcd;
+	}
+	device_wakeup_enable(hcd->self.controller);
+	return 0;
+
+fail_add_hcd:
+	exynos_ohci_phy_disable(&pdev->dev);
+	pdev->dev.of_node = exynos_ohci->of_node;
+fail_io:
+	clk_disable_unprepare(exynos_ohci->clk);
+fail_clk:
+	usb_put_hcd(hcd);
+	return err;
+}
+
+static int exynos_ohci_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
+
+	pdev->dev.of_node = exynos_ohci->of_node;
+
+	usb_remove_hcd(hcd);
+
+	exynos_ohci_phy_disable(&pdev->dev);
+
+	clk_disable_unprepare(exynos_ohci->clk);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+static void exynos_ohci_shutdown(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
+}
+
+#ifdef CONFIG_PM
+static int exynos_ohci_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
+	bool do_wakeup = device_may_wakeup(dev);
+	int rc = ohci_suspend(hcd, do_wakeup);
+
+	if (rc)
+		return rc;
+
+	exynos_ohci_phy_disable(dev);
+
+	clk_disable_unprepare(exynos_ohci->clk);
+
+	return 0;
+}
+
+static int exynos_ohci_resume(struct device *dev)
+{
+	struct usb_hcd *hcd			= dev_get_drvdata(dev);
+	struct exynos_ohci_hcd *exynos_ohci	= to_exynos_ohci(hcd);
+	int ret;
+
+	clk_prepare_enable(exynos_ohci->clk);
+
+	ret = exynos_ohci_phy_enable(dev);
+	if (ret) {
+		dev_err(dev, "Failed to enable USB phy\n");
+		clk_disable_unprepare(exynos_ohci->clk);
+		return ret;
+	}
+
+	ohci_resume(hcd, false);
+
+	return 0;
+}
+#else
+#define exynos_ohci_suspend	NULL
+#define exynos_ohci_resume	NULL
+#endif
+
+static const struct ohci_driver_overrides exynos_overrides __initconst = {
+	.extra_priv_size =	sizeof(struct exynos_ohci_hcd),
+};
+
+static const struct dev_pm_ops exynos_ohci_pm_ops = {
+	.suspend	= exynos_ohci_suspend,
+	.resume		= exynos_ohci_resume,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id exynos_ohci_match[] = {
+	{ .compatible = "samsung,exynos4210-ohci" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, exynos_ohci_match);
+#endif
+
+static struct platform_driver exynos_ohci_driver = {
+	.probe		= exynos_ohci_probe,
+	.remove		= exynos_ohci_remove,
+	.shutdown	= exynos_ohci_shutdown,
+	.driver = {
+		.name	= "exynos-ohci",
+		.pm	= &exynos_ohci_pm_ops,
+		.of_match_table	= of_match_ptr(exynos_ohci_match),
+	}
+};
+static int __init ohci_exynos_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ohci_init_driver(&exynos_ohci_hc_driver, &exynos_overrides);
+	return platform_driver_register(&exynos_ohci_driver);
+}
+module_init(ohci_exynos_init);
+
+static void __exit ohci_exynos_cleanup(void)
+{
+	platform_driver_unregister(&exynos_ohci_driver);
+}
+module_exit(ohci_exynos_cleanup);
+
+MODULE_ALIAS("platform:exynos-ohci");
+MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
new file mode 100644
index 000000000..0457dd9f6
--- /dev/null
+++ b/drivers/usb/host/ohci-hcd.c
@@ -0,0 +1,1367 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Open Host Controller Interface (OHCI) driver for USB.
+ *
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * [ Initialisation is based on Linus'  ]
+ * [ uhci code and gregs ohci fragments ]
+ * [ (C) Copyright 1999 Linus Torvalds  ]
+ * [ (C) Copyright 1999 Gregory P. Smith]
+ *
+ *
+ * OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
+ * interfaces (though some non-x86 Intel chips use it).  It supports
+ * smarter hardware than UHCI.  A download link for the spec available
+ * through the https://www.usb.org website.
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/hcd.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/workqueue.h>
+#include <linux/debugfs.h>
+#include <linux/genalloc.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+
+
+#define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell"
+#define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
+
+/*-------------------------------------------------------------------------*/
+
+/* For initializing controller (mask in an HCFS mode too) */
+#define	OHCI_CONTROL_INIT	OHCI_CTRL_CBSR
+#define	OHCI_INTR_INIT \
+		(OHCI_INTR_MIE | OHCI_INTR_RHSC | OHCI_INTR_UE \
+		| OHCI_INTR_RD | OHCI_INTR_WDH)
+
+#ifdef __hppa__
+/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
+#define	IR_DISABLE
+#endif
+
+#ifdef CONFIG_ARCH_OMAP
+/* OMAP doesn't support IR (no SMM; not needed) */
+#define	IR_DISABLE
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static const char	hcd_name [] = "ohci_hcd";
+
+#define	STATECHANGE_DELAY	msecs_to_jiffies(300)
+#define	IO_WATCHDOG_DELAY	msecs_to_jiffies(275)
+#define	IO_WATCHDOG_OFF		0xffffff00
+
+#include "ohci.h"
+#include "pci-quirks.h"
+
+static void ohci_dump(struct ohci_hcd *ohci);
+static void ohci_stop(struct usb_hcd *hcd);
+static void io_watchdog_func(struct timer_list *t);
+
+#include "ohci-hub.c"
+#include "ohci-dbg.c"
+#include "ohci-mem.c"
+#include "ohci-q.c"
+
+
+/*
+ * On architectures with edge-triggered interrupts we must never return
+ * IRQ_NONE.
+ */
+#if defined(CONFIG_SA1111)  /* ... or other edge-triggered systems */
+#define IRQ_NOTMINE	IRQ_HANDLED
+#else
+#define IRQ_NOTMINE	IRQ_NONE
+#endif
+
+
+/* Some boards misreport power switching/overcurrent */
+static bool distrust_firmware;
+module_param (distrust_firmware, bool, 0);
+MODULE_PARM_DESC (distrust_firmware,
+	"true to distrust firmware power/overcurrent setup");
+
+/* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */
+static bool no_handshake;
+module_param (no_handshake, bool, 0);
+MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake");
+
+/*-------------------------------------------------------------------------*/
+
+static int number_of_tds(struct urb *urb)
+{
+	int			len, i, num, this_sg_len;
+	struct scatterlist	*sg;
+
+	len = urb->transfer_buffer_length;
+	i = urb->num_mapped_sgs;
+
+	if (len > 0 && i > 0) {		/* Scatter-gather transfer */
+		num = 0;
+		sg = urb->sg;
+		for (;;) {
+			this_sg_len = min_t(int, sg_dma_len(sg), len);
+			num += DIV_ROUND_UP(this_sg_len, 4096);
+			len -= this_sg_len;
+			if (--i <= 0 || len <= 0)
+				break;
+			sg = sg_next(sg);
+		}
+
+	} else {			/* Non-SG transfer */
+		/* one TD for every 4096 Bytes (could be up to 8K) */
+		num = DIV_ROUND_UP(len, 4096);
+	}
+	return num;
+}
+
+/*
+ * queue up an urb for anything except the root hub
+ */
+static int ohci_urb_enqueue (
+	struct usb_hcd	*hcd,
+	struct urb	*urb,
+	gfp_t		mem_flags
+) {
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+	struct ed	*ed;
+	urb_priv_t	*urb_priv;
+	unsigned int	pipe = urb->pipe;
+	int		i, size = 0;
+	unsigned long	flags;
+	int		retval = 0;
+
+	/* every endpoint has a ed, locate and maybe (re)initialize it */
+	ed = ed_get(ohci, urb->ep, urb->dev, pipe, urb->interval);
+	if (! ed)
+		return -ENOMEM;
+
+	/* for the private part of the URB we need the number of TDs (size) */
+	switch (ed->type) {
+		case PIPE_CONTROL:
+			/* td_submit_urb() doesn't yet handle these */
+			if (urb->transfer_buffer_length > 4096)
+				return -EMSGSIZE;
+
+			/* 1 TD for setup, 1 for ACK, plus ... */
+			size = 2;
+			fallthrough;
+		// case PIPE_INTERRUPT:
+		// case PIPE_BULK:
+		default:
+			size += number_of_tds(urb);
+			/* maybe a zero-length packet to wrap it up */
+			if (size == 0)
+				size++;
+			else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
+				&& (urb->transfer_buffer_length
+					% usb_maxpacket(urb->dev, pipe)) == 0)
+				size++;
+			break;
+		case PIPE_ISOCHRONOUS: /* number of packets from URB */
+			size = urb->number_of_packets;
+			break;
+	}
+
+	/* allocate the private part of the URB */
+	urb_priv = kzalloc(struct_size(urb_priv, td, size), mem_flags);
+	if (!urb_priv)
+		return -ENOMEM;
+	INIT_LIST_HEAD (&urb_priv->pending);
+	urb_priv->length = size;
+	urb_priv->ed = ed;
+
+	/* allocate the TDs (deferring hash chain updates) */
+	for (i = 0; i < size; i++) {
+		urb_priv->td [i] = td_alloc (ohci, mem_flags);
+		if (!urb_priv->td [i]) {
+			urb_priv->length = i;
+			urb_free_priv (ohci, urb_priv);
+			return -ENOMEM;
+		}
+	}
+
+	spin_lock_irqsave (&ohci->lock, flags);
+
+	/* don't submit to a dead HC */
+	if (!HCD_HW_ACCESSIBLE(hcd)) {
+		retval = -ENODEV;
+		goto fail;
+	}
+	if (ohci->rh_state != OHCI_RH_RUNNING) {
+		retval = -ENODEV;
+		goto fail;
+	}
+	retval = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (retval)
+		goto fail;
+
+	/* schedule the ed if needed */
+	if (ed->state == ED_IDLE) {
+		retval = ed_schedule (ohci, ed);
+		if (retval < 0) {
+			usb_hcd_unlink_urb_from_ep(hcd, urb);
+			goto fail;
+		}
+
+		/* Start up the I/O watchdog timer, if it's not running */
+		if (ohci->prev_frame_no == IO_WATCHDOG_OFF &&
+				list_empty(&ohci->eds_in_use) &&
+				!(ohci->flags & OHCI_QUIRK_QEMU)) {
+			ohci->prev_frame_no = ohci_frame_no(ohci);
+			mod_timer(&ohci->io_watchdog,
+					jiffies + IO_WATCHDOG_DELAY);
+		}
+		list_add(&ed->in_use_list, &ohci->eds_in_use);
+
+		if (ed->type == PIPE_ISOCHRONOUS) {
+			u16	frame = ohci_frame_no(ohci);
+
+			/* delay a few frames before the first TD */
+			frame += max_t (u16, 8, ed->interval);
+			frame &= ~(ed->interval - 1);
+			frame |= ed->branch;
+			urb->start_frame = frame;
+			ed->last_iso = frame + ed->interval * (size - 1);
+		}
+	} else if (ed->type == PIPE_ISOCHRONOUS) {
+		u16	next = ohci_frame_no(ohci) + 1;
+		u16	frame = ed->last_iso + ed->interval;
+		u16	length = ed->interval * (size - 1);
+
+		/* Behind the scheduling threshold? */
+		if (unlikely(tick_before(frame, next))) {
+
+			/* URB_ISO_ASAP: Round up to the first available slot */
+			if (urb->transfer_flags & URB_ISO_ASAP) {
+				frame += (next - frame + ed->interval - 1) &
+						-ed->interval;
+
+			/*
+			 * Not ASAP: Use the next slot in the stream,
+			 * no matter what.
+			 */
+			} else {
+				/*
+				 * Some OHCI hardware doesn't handle late TDs
+				 * correctly.  After retiring them it proceeds
+				 * to the next ED instead of the next TD.
+				 * Therefore we have to omit the late TDs
+				 * entirely.
+				 */
+				urb_priv->td_cnt = DIV_ROUND_UP(
+						(u16) (next - frame),
+						ed->interval);
+				if (urb_priv->td_cnt >= urb_priv->length) {
+					++urb_priv->td_cnt;	/* Mark it */
+					ohci_dbg(ohci, "iso underrun %p (%u+%u < %u)\n",
+							urb, frame, length,
+							next);
+				}
+			}
+		}
+		urb->start_frame = frame;
+		ed->last_iso = frame + length;
+	}
+
+	/* fill the TDs and link them to the ed; and
+	 * enable that part of the schedule, if needed
+	 * and update count of queued periodic urbs
+	 */
+	urb->hcpriv = urb_priv;
+	td_submit_urb (ohci, urb);
+
+fail:
+	if (retval)
+		urb_free_priv (ohci, urb_priv);
+	spin_unlock_irqrestore (&ohci->lock, flags);
+	return retval;
+}
+
+/*
+ * decouple the URB from the HC queues (TDs, urb_priv).
+ * reporting is always done
+ * asynchronously, and we might be dealing with an urb that's
+ * partially transferred, or an ED with other urbs being unlinked.
+ */
+static int ohci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+	unsigned long		flags;
+	int			rc;
+	urb_priv_t		*urb_priv;
+
+	spin_lock_irqsave (&ohci->lock, flags);
+	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (rc == 0) {
+
+		/* Unless an IRQ completed the unlink while it was being
+		 * handed to us, flag it for unlink and giveback, and force
+		 * some upcoming INTR_SF to call finish_unlinks()
+		 */
+		urb_priv = urb->hcpriv;
+		if (urb_priv->ed->state == ED_OPER)
+			start_ed_unlink(ohci, urb_priv->ed);
+
+		if (ohci->rh_state != OHCI_RH_RUNNING) {
+			/* With HC dead, we can clean up right away */
+			ohci_work(ohci);
+		}
+	}
+	spin_unlock_irqrestore (&ohci->lock, flags);
+	return rc;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* frees config/altsetting state for endpoints,
+ * including ED memory, dummy TD, and bulk/intr data toggle
+ */
+
+static void
+ohci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+	unsigned long		flags;
+	struct ed		*ed = ep->hcpriv;
+	unsigned		limit = 1000;
+
+	/* ASSERT:  any requests/urbs are being unlinked */
+	/* ASSERT:  nobody can be submitting urbs for this any more */
+
+	if (!ed)
+		return;
+
+rescan:
+	spin_lock_irqsave (&ohci->lock, flags);
+
+	if (ohci->rh_state != OHCI_RH_RUNNING) {
+sanitize:
+		ed->state = ED_IDLE;
+		ohci_work(ohci);
+	}
+
+	switch (ed->state) {
+	case ED_UNLINK:		/* wait for hw to finish? */
+		/* major IRQ delivery trouble loses INTR_SF too... */
+		if (limit-- == 0) {
+			ohci_warn(ohci, "ED unlink timeout\n");
+			goto sanitize;
+		}
+		spin_unlock_irqrestore (&ohci->lock, flags);
+		schedule_timeout_uninterruptible(1);
+		goto rescan;
+	case ED_IDLE:		/* fully unlinked */
+		if (list_empty (&ed->td_list)) {
+			td_free (ohci, ed->dummy);
+			ed_free (ohci, ed);
+			break;
+		}
+		fallthrough;
+	default:
+		/* caller was supposed to have unlinked any requests;
+		 * that's not our job.  can't recover; must leak ed.
+		 */
+		ohci_err (ohci, "leak ed %p (#%02x) state %d%s\n",
+			ed, ep->desc.bEndpointAddress, ed->state,
+			list_empty (&ed->td_list) ? "" : " (has tds)");
+		td_free (ohci, ed->dummy);
+		break;
+	}
+	ep->hcpriv = NULL;
+	spin_unlock_irqrestore (&ohci->lock, flags);
+}
+
+static int ohci_get_frame (struct usb_hcd *hcd)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+
+	return ohci_frame_no(ohci);
+}
+
+static void ohci_usb_reset (struct ohci_hcd *ohci)
+{
+	ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
+	ohci->hc_control &= OHCI_CTRL_RWC;
+	ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+	ohci->rh_state = OHCI_RH_HALTED;
+}
+
+/* ohci_shutdown forcibly disables IRQs and DMA, helping kexec and
+ * other cases where the next software may expect clean state from the
+ * "firmware".  this is bus-neutral, unlike shutdown() methods.
+ */
+static void _ohci_shutdown(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci;
+
+	ohci = hcd_to_ohci (hcd);
+	ohci_writel(ohci, (u32) ~0, &ohci->regs->intrdisable);
+
+	/* Software reset, after which the controller goes into SUSPEND */
+	ohci_writel(ohci, OHCI_HCR, &ohci->regs->cmdstatus);
+	ohci_readl(ohci, &ohci->regs->cmdstatus);	/* flush the writes */
+	udelay(10);
+
+	ohci_writel(ohci, ohci->fminterval, &ohci->regs->fminterval);
+	ohci->rh_state = OHCI_RH_HALTED;
+}
+
+static void ohci_shutdown(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ohci->lock, flags);
+	_ohci_shutdown(hcd);
+	spin_unlock_irqrestore(&ohci->lock, flags);
+}
+
+/*-------------------------------------------------------------------------*
+ * HC functions
+ *-------------------------------------------------------------------------*/
+
+/* init memory, and kick BIOS/SMM off */
+
+static int ohci_init (struct ohci_hcd *ohci)
+{
+	int ret;
+	struct usb_hcd *hcd = ohci_to_hcd(ohci);
+
+	/* Accept arbitrarily long scatter-gather lists */
+	if (!hcd->localmem_pool)
+		hcd->self.sg_tablesize = ~0;
+
+	if (distrust_firmware)
+		ohci->flags |= OHCI_QUIRK_HUB_POWER;
+
+	ohci->rh_state = OHCI_RH_HALTED;
+	ohci->regs = hcd->regs;
+
+	/* REVISIT this BIOS handshake is now moved into PCI "quirks", and
+	 * was never needed for most non-PCI systems ... remove the code?
+	 */
+
+#ifndef IR_DISABLE
+	/* SMM owns the HC?  not for long! */
+	if (!no_handshake && ohci_readl (ohci,
+					&ohci->regs->control) & OHCI_CTRL_IR) {
+		u32 temp;
+
+		ohci_dbg (ohci, "USB HC TakeOver from BIOS/SMM\n");
+
+		/* this timeout is arbitrary.  we make it long, so systems
+		 * depending on usb keyboards may be usable even if the
+		 * BIOS/SMM code seems pretty broken.
+		 */
+		temp = 500;	/* arbitrary: five seconds */
+
+		ohci_writel (ohci, OHCI_INTR_OC, &ohci->regs->intrenable);
+		ohci_writel (ohci, OHCI_OCR, &ohci->regs->cmdstatus);
+		while (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_IR) {
+			msleep (10);
+			if (--temp == 0) {
+				ohci_err (ohci, "USB HC takeover failed!"
+					"  (BIOS/SMM bug)\n");
+				return -EBUSY;
+			}
+		}
+		ohci_usb_reset (ohci);
+	}
+#endif
+
+	/* Disable HC interrupts */
+	ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+
+	/* flush the writes, and save key bits like RWC */
+	if (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_RWC)
+		ohci->hc_control |= OHCI_CTRL_RWC;
+
+	/* Read the number of ports unless overridden */
+	if (ohci->num_ports == 0)
+		ohci->num_ports = roothub_a(ohci) & RH_A_NDP;
+
+	if (ohci->hcca)
+		return 0;
+
+	timer_setup(&ohci->io_watchdog, io_watchdog_func, 0);
+	ohci->prev_frame_no = IO_WATCHDOG_OFF;
+
+	if (hcd->localmem_pool)
+		ohci->hcca = gen_pool_dma_alloc_align(hcd->localmem_pool,
+						sizeof(*ohci->hcca),
+						&ohci->hcca_dma, 256);
+	else
+		ohci->hcca = dma_alloc_coherent(hcd->self.controller,
+						sizeof(*ohci->hcca),
+						&ohci->hcca_dma,
+						GFP_KERNEL);
+	if (!ohci->hcca)
+		return -ENOMEM;
+
+	if ((ret = ohci_mem_init (ohci)) < 0)
+		ohci_stop (hcd);
+	else {
+		create_debug_files (ohci);
+	}
+
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Start an OHCI controller, set the BUS operational
+ * resets USB and controller
+ * enable interrupts
+ */
+static int ohci_run (struct ohci_hcd *ohci)
+{
+	u32			mask, val;
+	int			first = ohci->fminterval == 0;
+	struct usb_hcd		*hcd = ohci_to_hcd(ohci);
+
+	ohci->rh_state = OHCI_RH_HALTED;
+
+	/* boot firmware should have set this up (5.1.1.3.1) */
+	if (first) {
+
+		val = ohci_readl (ohci, &ohci->regs->fminterval);
+		ohci->fminterval = val & 0x3fff;
+		if (ohci->fminterval != FI)
+			ohci_dbg (ohci, "fminterval delta %d\n",
+				ohci->fminterval - FI);
+		ohci->fminterval |= FSMP (ohci->fminterval) << 16;
+		/* also: power/overcurrent flags in roothub.a */
+	}
+
+	/* Reset USB nearly "by the book".  RemoteWakeupConnected has
+	 * to be checked in case boot firmware (BIOS/SMM/...) has set up
+	 * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM).
+	 * If the bus glue detected wakeup capability then it should
+	 * already be enabled; if so we'll just enable it again.
+	 */
+	if ((ohci->hc_control & OHCI_CTRL_RWC) != 0)
+		device_set_wakeup_capable(hcd->self.controller, 1);
+
+	switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+	case OHCI_USB_OPER:
+		val = 0;
+		break;
+	case OHCI_USB_SUSPEND:
+	case OHCI_USB_RESUME:
+		ohci->hc_control &= OHCI_CTRL_RWC;
+		ohci->hc_control |= OHCI_USB_RESUME;
+		val = 10 /* msec wait */;
+		break;
+	// case OHCI_USB_RESET:
+	default:
+		ohci->hc_control &= OHCI_CTRL_RWC;
+		ohci->hc_control |= OHCI_USB_RESET;
+		val = 50 /* msec wait */;
+		break;
+	}
+	ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+	// flush the writes
+	(void) ohci_readl (ohci, &ohci->regs->control);
+	msleep(val);
+
+	memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
+
+	/* 2msec timelimit here means no irqs/preempt */
+	spin_lock_irq (&ohci->lock);
+
+retry:
+	/* HC Reset requires max 10 us delay */
+	ohci_writel (ohci, OHCI_HCR,  &ohci->regs->cmdstatus);
+	val = 30;	/* ... allow extra time */
+	while ((ohci_readl (ohci, &ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
+		if (--val == 0) {
+			spin_unlock_irq (&ohci->lock);
+			ohci_err (ohci, "USB HC reset timed out!\n");
+			return -1;
+		}
+		udelay (1);
+	}
+
+	/* now we're in the SUSPEND state ... must go OPERATIONAL
+	 * within 2msec else HC enters RESUME
+	 *
+	 * ... but some hardware won't init fmInterval "by the book"
+	 * (SiS, OPTi ...), so reset again instead.  SiS doesn't need
+	 * this if we write fmInterval after we're OPERATIONAL.
+	 * Unclear about ALi, ServerWorks, and others ... this could
+	 * easily be a longstanding bug in chip init on Linux.
+	 */
+	if (ohci->flags & OHCI_QUIRK_INITRESET) {
+		ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+		// flush those writes
+		(void) ohci_readl (ohci, &ohci->regs->control);
+	}
+
+	/* Tell the controller where the control and bulk lists are
+	 * The lists are empty now. */
+	ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
+	ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
+
+	/* a reset clears this */
+	ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);
+
+	periodic_reinit (ohci);
+
+	/* some OHCI implementations are finicky about how they init.
+	 * bogus values here mean not even enumeration could work.
+	 */
+	if ((ohci_readl (ohci, &ohci->regs->fminterval) & 0x3fff0000) == 0
+			|| !ohci_readl (ohci, &ohci->regs->periodicstart)) {
+		if (!(ohci->flags & OHCI_QUIRK_INITRESET)) {
+			ohci->flags |= OHCI_QUIRK_INITRESET;
+			ohci_dbg (ohci, "enabling initreset quirk\n");
+			goto retry;
+		}
+		spin_unlock_irq (&ohci->lock);
+		ohci_err (ohci, "init err (%08x %04x)\n",
+			ohci_readl (ohci, &ohci->regs->fminterval),
+			ohci_readl (ohci, &ohci->regs->periodicstart));
+		return -EOVERFLOW;
+	}
+
+	/* use rhsc irqs after hub_wq is allocated */
+	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	hcd->uses_new_polling = 1;
+
+	/* start controller operations */
+	ohci->hc_control &= OHCI_CTRL_RWC;
+	ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
+	ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+	ohci->rh_state = OHCI_RH_RUNNING;
+
+	/* wake on ConnectStatusChange, matching external hubs */
+	ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status);
+
+	/* Choose the interrupts we care about now, others later on demand */
+	mask = OHCI_INTR_INIT;
+	ohci_writel (ohci, ~0, &ohci->regs->intrstatus);
+	ohci_writel (ohci, mask, &ohci->regs->intrenable);
+
+	/* handle root hub init quirks ... */
+	val = roothub_a (ohci);
+	/* Configure for per-port over-current protection by default */
+	val &= ~RH_A_NOCP;
+	val |= RH_A_OCPM;
+	if (ohci->flags & OHCI_QUIRK_SUPERIO) {
+		/* NSC 87560 and maybe others.
+		 * Ganged power switching, no over-current protection.
+		 */
+		val |= RH_A_NOCP;
+		val &= ~(RH_A_POTPGT | RH_A_NPS | RH_A_PSM | RH_A_OCPM);
+	} else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
+			(ohci->flags & OHCI_QUIRK_HUB_POWER)) {
+		/* hub power always on; required for AMD-756 and some
+		 * Mac platforms.
+		 */
+		val |= RH_A_NPS;
+	}
+	ohci_writel(ohci, val, &ohci->regs->roothub.a);
+
+	ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
+	ohci_writel (ohci, (val & RH_A_NPS) ? 0 : RH_B_PPCM,
+						&ohci->regs->roothub.b);
+	// flush those writes
+	(void) ohci_readl (ohci, &ohci->regs->control);
+
+	ohci->next_statechange = jiffies + STATECHANGE_DELAY;
+	spin_unlock_irq (&ohci->lock);
+
+	// POTPGT delay is bits 24-31, in 2 ms units.
+	mdelay ((val >> 23) & 0x1fe);
+
+	ohci_dump(ohci);
+
+	return 0;
+}
+
+/* ohci_setup routine for generic controller initialization */
+
+int ohci_setup(struct usb_hcd *hcd)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci(hcd);
+
+	ohci_hcd_init(ohci);
+	
+	return ohci_init(ohci);
+}
+EXPORT_SYMBOL_GPL(ohci_setup);
+
+/* ohci_start routine for generic controller start of all OHCI bus glue */
+static int ohci_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci(hcd);
+	int	ret;
+
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		ohci_err(ohci, "can't start\n");
+		ohci_stop(hcd);
+	}
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Some OHCI controllers are known to lose track of completed TDs.  They
+ * don't add the TDs to the hardware done queue, which means we never see
+ * them as being completed.
+ *
+ * This watchdog routine checks for such problems.  Without some way to
+ * tell when those TDs have completed, we would never take their EDs off
+ * the unlink list.  As a result, URBs could never be dequeued and
+ * endpoints could never be released.
+ */
+static void io_watchdog_func(struct timer_list *t)
+{
+	struct ohci_hcd	*ohci = from_timer(ohci, t, io_watchdog);
+	bool		takeback_all_pending = false;
+	u32		status;
+	u32		head;
+	struct ed	*ed;
+	struct td	*td, *td_start, *td_next;
+	unsigned	frame_no, prev_frame_no = IO_WATCHDOG_OFF;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&ohci->lock, flags);
+
+	/*
+	 * One way to lose track of completed TDs is if the controller
+	 * never writes back the done queue head.  If it hasn't been
+	 * written back since the last time this function ran and if it
+	 * was non-empty at that time, something is badly wrong with the
+	 * hardware.
+	 */
+	status = ohci_readl(ohci, &ohci->regs->intrstatus);
+	if (!(status & OHCI_INTR_WDH) && ohci->wdh_cnt == ohci->prev_wdh_cnt) {
+		if (ohci->prev_donehead) {
+			ohci_err(ohci, "HcDoneHead not written back; disabled\n");
+ died:
+			usb_hc_died(ohci_to_hcd(ohci));
+			ohci_dump(ohci);
+			_ohci_shutdown(ohci_to_hcd(ohci));
+			goto done;
+		} else {
+			/* No write back because the done queue was empty */
+			takeback_all_pending = true;
+		}
+	}
+
+	/* Check every ED which might have pending TDs */
+	list_for_each_entry(ed, &ohci->eds_in_use, in_use_list) {
+		if (ed->pending_td) {
+			if (takeback_all_pending ||
+					OKAY_TO_TAKEBACK(ohci, ed)) {
+				unsigned tmp = hc32_to_cpu(ohci, ed->hwINFO);
+
+				ohci_dbg(ohci, "takeback pending TD for dev %d ep 0x%x\n",
+						0x007f & tmp,
+						(0x000f & (tmp >> 7)) +
+							((tmp & ED_IN) >> 5));
+				add_to_done_list(ohci, ed->pending_td);
+			}
+		}
+
+		/* Starting from the latest pending TD, */
+		td = ed->pending_td;
+
+		/* or the last TD on the done list, */
+		if (!td) {
+			list_for_each_entry(td_next, &ed->td_list, td_list) {
+				if (!td_next->next_dl_td)
+					break;
+				td = td_next;
+			}
+		}
+
+		/* find the last TD processed by the controller. */
+		head = hc32_to_cpu(ohci, READ_ONCE(ed->hwHeadP)) & TD_MASK;
+		td_start = td;
+		td_next = list_prepare_entry(td, &ed->td_list, td_list);
+		list_for_each_entry_continue(td_next, &ed->td_list, td_list) {
+			if (head == (u32) td_next->td_dma)
+				break;
+			td = td_next;	/* head pointer has passed this TD */
+		}
+		if (td != td_start) {
+			/*
+			 * In case a WDH cycle is in progress, we will wait
+			 * for the next two cycles to complete before assuming
+			 * this TD will never get on the done queue.
+			 */
+			ed->takeback_wdh_cnt = ohci->wdh_cnt + 2;
+			ed->pending_td = td;
+		}
+	}
+
+	ohci_work(ohci);
+
+	if (ohci->rh_state == OHCI_RH_RUNNING) {
+
+		/*
+		 * Sometimes a controller just stops working.  We can tell
+		 * by checking that the frame counter has advanced since
+		 * the last time we ran.
+		 *
+		 * But be careful: Some controllers violate the spec by
+		 * stopping their frame counter when no ports are active.
+		 */
+		frame_no = ohci_frame_no(ohci);
+		if (frame_no == ohci->prev_frame_no) {
+			int		active_cnt = 0;
+			int		i;
+			unsigned	tmp;
+
+			for (i = 0; i < ohci->num_ports; ++i) {
+				tmp = roothub_portstatus(ohci, i);
+				/* Enabled and not suspended? */
+				if ((tmp & RH_PS_PES) && !(tmp & RH_PS_PSS))
+					++active_cnt;
+			}
+
+			if (active_cnt > 0) {
+				ohci_err(ohci, "frame counter not updating; disabled\n");
+				goto died;
+			}
+		}
+		if (!list_empty(&ohci->eds_in_use)) {
+			prev_frame_no = frame_no;
+			ohci->prev_wdh_cnt = ohci->wdh_cnt;
+			ohci->prev_donehead = ohci_readl(ohci,
+					&ohci->regs->donehead);
+			mod_timer(&ohci->io_watchdog,
+					jiffies + IO_WATCHDOG_DELAY);
+		}
+	}
+
+ done:
+	ohci->prev_frame_no = prev_frame_no;
+	spin_unlock_irqrestore(&ohci->lock, flags);
+}
+
+/* an interrupt happens */
+
+static irqreturn_t ohci_irq (struct usb_hcd *hcd)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+	struct ohci_regs __iomem *regs = ohci->regs;
+	int			ints;
+
+	/* Read interrupt status (and flush pending writes).  We ignore the
+	 * optimization of checking the LSB of hcca->done_head; it doesn't
+	 * work on all systems (edge triggering for OHCI can be a factor).
+	 */
+	ints = ohci_readl(ohci, &regs->intrstatus);
+
+	/* Check for an all 1's result which is a typical consequence
+	 * of dead, unclocked, or unplugged (CardBus...) devices
+	 */
+	if (ints == ~(u32)0) {
+		ohci->rh_state = OHCI_RH_HALTED;
+		ohci_dbg (ohci, "device removed!\n");
+		usb_hc_died(hcd);
+		return IRQ_HANDLED;
+	}
+
+	/* We only care about interrupts that are enabled */
+	ints &= ohci_readl(ohci, &regs->intrenable);
+
+	/* interrupt for some other device? */
+	if (ints == 0 || unlikely(ohci->rh_state == OHCI_RH_HALTED))
+		return IRQ_NOTMINE;
+
+	if (ints & OHCI_INTR_UE) {
+		// e.g. due to PCI Master/Target Abort
+		if (quirk_nec(ohci)) {
+			/* Workaround for a silicon bug in some NEC chips used
+			 * in Apple's PowerBooks. Adapted from Darwin code.
+			 */
+			ohci_err (ohci, "OHCI Unrecoverable Error, scheduling NEC chip restart\n");
+
+			ohci_writel (ohci, OHCI_INTR_UE, &regs->intrdisable);
+
+			schedule_work (&ohci->nec_work);
+		} else {
+			ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n");
+			ohci->rh_state = OHCI_RH_HALTED;
+			usb_hc_died(hcd);
+		}
+
+		ohci_dump(ohci);
+		ohci_usb_reset (ohci);
+	}
+
+	if (ints & OHCI_INTR_RHSC) {
+		ohci_dbg(ohci, "rhsc\n");
+		ohci->next_statechange = jiffies + STATECHANGE_DELAY;
+		ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC,
+				&regs->intrstatus);
+
+		/* NOTE: Vendors didn't always make the same implementation
+		 * choices for RHSC.  Many followed the spec; RHSC triggers
+		 * on an edge, like setting and maybe clearing a port status
+		 * change bit.  With others it's level-triggered, active
+		 * until hub_wq clears all the port status change bits.  We'll
+		 * always disable it here and rely on polling until hub_wq
+		 * re-enables it.
+		 */
+		ohci_writel(ohci, OHCI_INTR_RHSC, &regs->intrdisable);
+		usb_hcd_poll_rh_status(hcd);
+	}
+
+	/* For connect and disconnect events, we expect the controller
+	 * to turn on RHSC along with RD.  But for remote wakeup events
+	 * this might not happen.
+	 */
+	else if (ints & OHCI_INTR_RD) {
+		ohci_dbg(ohci, "resume detect\n");
+		ohci_writel(ohci, OHCI_INTR_RD, &regs->intrstatus);
+		set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+		if (ohci->autostop) {
+			spin_lock (&ohci->lock);
+			ohci_rh_resume (ohci);
+			spin_unlock (&ohci->lock);
+		} else
+			usb_hcd_resume_root_hub(hcd);
+	}
+
+	spin_lock(&ohci->lock);
+	if (ints & OHCI_INTR_WDH)
+		update_done_list(ohci);
+
+	/* could track INTR_SO to reduce available PCI/... bandwidth */
+
+	/* handle any pending URB/ED unlinks, leaving INTR_SF enabled
+	 * when there's still unlinking to be done (next frame).
+	 */
+	ohci_work(ohci);
+	if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list
+			&& ohci->rh_state == OHCI_RH_RUNNING)
+		ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);
+
+	if (ohci->rh_state == OHCI_RH_RUNNING) {
+		ohci_writel (ohci, ints, &regs->intrstatus);
+		if (ints & OHCI_INTR_WDH)
+			++ohci->wdh_cnt;
+
+		ohci_writel (ohci, OHCI_INTR_MIE, &regs->intrenable);
+		// flush those writes
+		(void) ohci_readl (ohci, &ohci->regs->control);
+	}
+	spin_unlock(&ohci->lock);
+
+	return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void ohci_stop (struct usb_hcd *hcd)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+
+	ohci_dump(ohci);
+
+	if (quirk_nec(ohci))
+		flush_work(&ohci->nec_work);
+	del_timer_sync(&ohci->io_watchdog);
+	ohci->prev_frame_no = IO_WATCHDOG_OFF;
+
+	ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+	ohci_usb_reset(ohci);
+	free_irq(hcd->irq, hcd);
+	hcd->irq = 0;
+
+	if (quirk_amdiso(ohci))
+		usb_amd_dev_put();
+
+	remove_debug_files (ohci);
+	ohci_mem_cleanup (ohci);
+	if (ohci->hcca) {
+		if (hcd->localmem_pool)
+			gen_pool_free(hcd->localmem_pool,
+				      (unsigned long)ohci->hcca,
+				      sizeof(*ohci->hcca));
+		else
+			dma_free_coherent(hcd->self.controller,
+					  sizeof(*ohci->hcca),
+					  ohci->hcca, ohci->hcca_dma);
+		ohci->hcca = NULL;
+		ohci->hcca_dma = 0;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_PM) || defined(CONFIG_USB_PCI)
+
+/* must not be called from interrupt context */
+int ohci_restart(struct ohci_hcd *ohci)
+{
+	int temp;
+	int i;
+	struct urb_priv *priv;
+
+	ohci_init(ohci);
+	spin_lock_irq(&ohci->lock);
+	ohci->rh_state = OHCI_RH_HALTED;
+
+	/* Recycle any "live" eds/tds (and urbs). */
+	if (!list_empty (&ohci->pending))
+		ohci_dbg(ohci, "abort schedule...\n");
+	list_for_each_entry (priv, &ohci->pending, pending) {
+		struct urb	*urb = priv->td[0]->urb;
+		struct ed	*ed = priv->ed;
+
+		switch (ed->state) {
+		case ED_OPER:
+			ed->state = ED_UNLINK;
+			ed->hwINFO |= cpu_to_hc32(ohci, ED_DEQUEUE);
+			ed_deschedule (ohci, ed);
+
+			ed->ed_next = ohci->ed_rm_list;
+			ed->ed_prev = NULL;
+			ohci->ed_rm_list = ed;
+			fallthrough;
+		case ED_UNLINK:
+			break;
+		default:
+			ohci_dbg(ohci, "bogus ed %p state %d\n",
+					ed, ed->state);
+		}
+
+		if (!urb->unlinked)
+			urb->unlinked = -ESHUTDOWN;
+	}
+	ohci_work(ohci);
+	spin_unlock_irq(&ohci->lock);
+
+	/* paranoia, in case that didn't work: */
+
+	/* empty the interrupt branches */
+	for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0;
+	for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0;
+
+	/* no EDs to remove */
+	ohci->ed_rm_list = NULL;
+
+	/* empty control and bulk lists */
+	ohci->ed_controltail = NULL;
+	ohci->ed_bulktail    = NULL;
+
+	if ((temp = ohci_run (ohci)) < 0) {
+		ohci_err (ohci, "can't restart, %d\n", temp);
+		return temp;
+	}
+	ohci_dbg(ohci, "restart complete\n");
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ohci_restart);
+
+#endif
+
+#ifdef CONFIG_PM
+
+int ohci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+	unsigned long	flags;
+	int		rc = 0;
+
+	/* Disable irq emission and mark HW unaccessible. Use
+	 * the spinlock to properly synchronize with possible pending
+	 * RH suspend or resume activity.
+	 */
+	spin_lock_irqsave (&ohci->lock, flags);
+	ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+	(void)ohci_readl(ohci, &ohci->regs->intrdisable);
+
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	spin_unlock_irqrestore (&ohci->lock, flags);
+
+	synchronize_irq(hcd->irq);
+
+	if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) {
+		ohci_resume(hcd, false);
+		rc = -EBUSY;
+	}
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ohci_suspend);
+
+
+int ohci_resume(struct usb_hcd *hcd, bool hibernated)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci(hcd);
+	int			port;
+	bool			need_reinit = false;
+
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	/* Make sure resume from hibernation re-enumerates everything */
+	if (hibernated)
+		ohci_usb_reset(ohci);
+
+	/* See if the controller is already running or has been reset */
+	ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
+	if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
+		need_reinit = true;
+	} else {
+		switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+		case OHCI_USB_OPER:
+		case OHCI_USB_RESET:
+			need_reinit = true;
+		}
+	}
+
+	/* If needed, reinitialize and suspend the root hub */
+	if (need_reinit) {
+		spin_lock_irq(&ohci->lock);
+		ohci_rh_resume(ohci);
+		ohci_rh_suspend(ohci, 0);
+		spin_unlock_irq(&ohci->lock);
+	}
+
+	/* Normally just turn on port power and enable interrupts */
+	else {
+		ohci_dbg(ohci, "powerup ports\n");
+		for (port = 0; port < ohci->num_ports; port++)
+			ohci_writel(ohci, RH_PS_PPS,
+					&ohci->regs->roothub.portstatus[port]);
+
+		ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable);
+		ohci_readl(ohci, &ohci->regs->intrenable);
+		msleep(20);
+	}
+
+	usb_hcd_resume_root_hub(hcd);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ohci_resume);
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Generic structure: This gets copied for platform drivers so that
+ * individual entries can be overridden as needed.
+ */
+
+static const struct hc_driver ohci_hc_driver = {
+	.description =          hcd_name,
+	.product_desc =         "OHCI Host Controller",
+	.hcd_priv_size =        sizeof(struct ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	*/
+	.irq =                  ohci_irq,
+	.flags =                HCD_MEMORY | HCD_DMA | HCD_USB11,
+
+	/*
+	* basic lifecycle operations
+	*/
+	.reset =                ohci_setup,
+	.start =                ohci_start,
+	.stop =                 ohci_stop,
+	.shutdown =             ohci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	*/
+	.urb_enqueue =          ohci_urb_enqueue,
+	.urb_dequeue =          ohci_urb_dequeue,
+	.endpoint_disable =     ohci_endpoint_disable,
+
+	/*
+	* scheduling support
+	*/
+	.get_frame_number =     ohci_get_frame,
+
+	/*
+	* root hub support
+	*/
+	.hub_status_data =      ohci_hub_status_data,
+	.hub_control =          ohci_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend =          ohci_bus_suspend,
+	.bus_resume =           ohci_bus_resume,
+#endif
+	.start_port_reset =	ohci_start_port_reset,
+};
+
+void ohci_init_driver(struct hc_driver *drv,
+		const struct ohci_driver_overrides *over)
+{
+	/* Copy the generic table to drv and then apply the overrides */
+	*drv = ohci_hc_driver;
+
+	if (over) {
+		drv->product_desc = over->product_desc;
+		drv->hcd_priv_size += over->extra_priv_size;
+		if (over->reset)
+			drv->reset = over->reset;
+	}
+}
+EXPORT_SYMBOL_GPL(ohci_init_driver);
+
+/*-------------------------------------------------------------------------*/
+
+MODULE_AUTHOR (DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE ("GPL");
+
+#if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_SA1111)
+#include "ohci-sa1111.c"
+#define SA1111_DRIVER		ohci_hcd_sa1111_driver
+#endif
+
+#ifdef CONFIG_USB_OHCI_HCD_PPC_OF
+#include "ohci-ppc-of.c"
+#define OF_PLATFORM_DRIVER	ohci_hcd_ppc_of_driver
+#endif
+
+#ifdef CONFIG_PPC_PS3
+#include "ohci-ps3.c"
+#define PS3_SYSTEM_BUS_DRIVER	ps3_ohci_driver
+#endif
+
+#ifdef CONFIG_MFD_SM501
+#include "ohci-sm501.c"
+#define SM501_OHCI_DRIVER	ohci_hcd_sm501_driver
+#endif
+
+#ifdef CONFIG_MFD_TC6393XB
+#include "ohci-tmio.c"
+#define TMIO_OHCI_DRIVER	ohci_hcd_tmio_driver
+#endif
+
+static int __init ohci_hcd_mod_init(void)
+{
+	int retval = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_debug ("%s: block sizes: ed %zd td %zd\n", hcd_name,
+		sizeof (struct ed), sizeof (struct td));
+	set_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
+
+	ohci_debug_root = debugfs_create_dir("ohci", usb_debug_root);
+
+#ifdef PS3_SYSTEM_BUS_DRIVER
+	retval = ps3_ohci_driver_register(&PS3_SYSTEM_BUS_DRIVER);
+	if (retval < 0)
+		goto error_ps3;
+#endif
+
+#ifdef OF_PLATFORM_DRIVER
+	retval = platform_driver_register(&OF_PLATFORM_DRIVER);
+	if (retval < 0)
+		goto error_of_platform;
+#endif
+
+#ifdef SA1111_DRIVER
+	retval = sa1111_driver_register(&SA1111_DRIVER);
+	if (retval < 0)
+		goto error_sa1111;
+#endif
+
+#ifdef SM501_OHCI_DRIVER
+	retval = platform_driver_register(&SM501_OHCI_DRIVER);
+	if (retval < 0)
+		goto error_sm501;
+#endif
+
+#ifdef TMIO_OHCI_DRIVER
+	retval = platform_driver_register(&TMIO_OHCI_DRIVER);
+	if (retval < 0)
+		goto error_tmio;
+#endif
+
+	return retval;
+
+	/* Error path */
+#ifdef TMIO_OHCI_DRIVER
+	platform_driver_unregister(&TMIO_OHCI_DRIVER);
+ error_tmio:
+#endif
+#ifdef SM501_OHCI_DRIVER
+	platform_driver_unregister(&SM501_OHCI_DRIVER);
+ error_sm501:
+#endif
+#ifdef SA1111_DRIVER
+	sa1111_driver_unregister(&SA1111_DRIVER);
+ error_sa1111:
+#endif
+#ifdef OF_PLATFORM_DRIVER
+	platform_driver_unregister(&OF_PLATFORM_DRIVER);
+ error_of_platform:
+#endif
+#ifdef PS3_SYSTEM_BUS_DRIVER
+	ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+ error_ps3:
+#endif
+	debugfs_remove(ohci_debug_root);
+	ohci_debug_root = NULL;
+
+	clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
+	return retval;
+}
+module_init(ohci_hcd_mod_init);
+
+static void __exit ohci_hcd_mod_exit(void)
+{
+#ifdef TMIO_OHCI_DRIVER
+	platform_driver_unregister(&TMIO_OHCI_DRIVER);
+#endif
+#ifdef SM501_OHCI_DRIVER
+	platform_driver_unregister(&SM501_OHCI_DRIVER);
+#endif
+#ifdef SA1111_DRIVER
+	sa1111_driver_unregister(&SA1111_DRIVER);
+#endif
+#ifdef OF_PLATFORM_DRIVER
+	platform_driver_unregister(&OF_PLATFORM_DRIVER);
+#endif
+#ifdef PS3_SYSTEM_BUS_DRIVER
+	ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+#endif
+	debugfs_remove(ohci_debug_root);
+	clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
+}
+module_exit(ohci_hcd_mod_exit);
+
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
new file mode 100644
index 000000000..90cee192e
--- /dev/null
+++ b/drivers/usb/host/ohci-hub.c
@@ -0,0 +1,803 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * This file is licenced under GPL
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * OHCI Root Hub ... the nonsharable stuff
+ */
+
+#define dbg_port(hc,label,num,value) \
+	ohci_dbg (hc, \
+		"%s roothub.portstatus [%d] " \
+		"= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
+		label, num, value, \
+		(value & RH_PS_PRSC) ? " PRSC" : "", \
+		(value & RH_PS_OCIC) ? " OCIC" : "", \
+		(value & RH_PS_PSSC) ? " PSSC" : "", \
+		(value & RH_PS_PESC) ? " PESC" : "", \
+		(value & RH_PS_CSC) ? " CSC" : "", \
+		\
+		(value & RH_PS_LSDA) ? " LSDA" : "", \
+		(value & RH_PS_PPS) ? " PPS" : "", \
+		(value & RH_PS_PRS) ? " PRS" : "", \
+		(value & RH_PS_POCI) ? " POCI" : "", \
+		(value & RH_PS_PSS) ? " PSS" : "", \
+		\
+		(value & RH_PS_PES) ? " PES" : "", \
+		(value & RH_PS_CCS) ? " CCS" : "" \
+		);
+
+/*-------------------------------------------------------------------------*/
+
+#define OHCI_SCHED_ENABLES \
+	(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
+
+static void update_done_list(struct ohci_hcd *);
+static void ohci_work(struct ohci_hcd *);
+
+#ifdef	CONFIG_PM
+static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop)
+__releases(ohci->lock)
+__acquires(ohci->lock)
+{
+	int			status = 0;
+
+	ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
+	switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+	case OHCI_USB_RESUME:
+		ohci_dbg (ohci, "resume/suspend?\n");
+		ohci->hc_control &= ~OHCI_CTRL_HCFS;
+		ohci->hc_control |= OHCI_USB_RESET;
+		ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+		(void) ohci_readl (ohci, &ohci->regs->control);
+		fallthrough;
+	case OHCI_USB_RESET:
+		status = -EBUSY;
+		ohci_dbg (ohci, "needs reinit!\n");
+		goto done;
+	case OHCI_USB_SUSPEND:
+		if (!ohci->autostop) {
+			ohci_dbg (ohci, "already suspended\n");
+			goto done;
+		}
+	}
+	ohci_dbg (ohci, "%s root hub\n",
+			autostop ? "auto-stop" : "suspend");
+
+	/* First stop any processing */
+	if (!autostop && (ohci->hc_control & OHCI_SCHED_ENABLES)) {
+		ohci->hc_control &= ~OHCI_SCHED_ENABLES;
+		ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+		ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
+		ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrstatus);
+
+		/* sched disables take effect on the next frame,
+		 * then the last WDH could take 6+ msec
+		 */
+		ohci_dbg (ohci, "stopping schedules ...\n");
+		ohci->autostop = 0;
+		spin_unlock_irq (&ohci->lock);
+		msleep (8);
+		spin_lock_irq (&ohci->lock);
+	}
+	update_done_list(ohci);
+	ohci_work(ohci);
+
+	/* All ED unlinks should be finished, no need for SOF interrupts */
+	ohci_writel(ohci, OHCI_INTR_SF, &ohci->regs->intrdisable);
+
+	/*
+	 * Some controllers don't handle "global" suspend properly if
+	 * there are unsuspended ports.  For these controllers, put all
+	 * the enabled ports into suspend before suspending the root hub.
+	 */
+	if (ohci->flags & OHCI_QUIRK_GLOBAL_SUSPEND) {
+		__hc32 __iomem	*portstat = ohci->regs->roothub.portstatus;
+		int		i;
+		unsigned	temp;
+
+		for (i = 0; i < ohci->num_ports; (++i, ++portstat)) {
+			temp = ohci_readl(ohci, portstat);
+			if ((temp & (RH_PS_PES | RH_PS_PSS)) ==
+					RH_PS_PES)
+				ohci_writel(ohci, RH_PS_PSS, portstat);
+		}
+	}
+
+	/* maybe resume can wake root hub */
+	if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) {
+		ohci->hc_control |= OHCI_CTRL_RWE;
+	} else {
+		ohci_writel(ohci, OHCI_INTR_RHSC | OHCI_INTR_RD,
+				&ohci->regs->intrdisable);
+		ohci->hc_control &= ~OHCI_CTRL_RWE;
+	}
+
+	/* Suspend hub ... this is the "global (to this bus) suspend" mode,
+	 * which doesn't imply ports will first be individually suspended.
+	 */
+	ohci->hc_control &= ~OHCI_CTRL_HCFS;
+	ohci->hc_control |= OHCI_USB_SUSPEND;
+	ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+	(void) ohci_readl (ohci, &ohci->regs->control);
+
+	/* no resumes until devices finish suspending */
+	if (!autostop) {
+		ohci->next_statechange = jiffies + msecs_to_jiffies (5);
+		ohci->autostop = 0;
+		ohci->rh_state = OHCI_RH_SUSPENDED;
+	}
+
+done:
+	return status;
+}
+
+static inline struct ed *find_head (struct ed *ed)
+{
+	/* for bulk and control lists */
+	while (ed->ed_prev)
+		ed = ed->ed_prev;
+	return ed;
+}
+
+/* caller has locked the root hub */
+static int ohci_rh_resume (struct ohci_hcd *ohci)
+__releases(ohci->lock)
+__acquires(ohci->lock)
+{
+	struct usb_hcd		*hcd = ohci_to_hcd (ohci);
+	u32			temp, enables;
+	int			status = -EINPROGRESS;
+	int			autostopped = ohci->autostop;
+
+	ohci->autostop = 0;
+	ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
+
+	if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
+		/* this can happen after resuming a swsusp snapshot */
+		if (ohci->rh_state != OHCI_RH_RUNNING) {
+			ohci_dbg (ohci, "BIOS/SMM active, control %03x\n",
+					ohci->hc_control);
+			status = -EBUSY;
+		/* this happens when pmcore resumes HC then root */
+		} else {
+			ohci_dbg (ohci, "duplicate resume\n");
+			status = 0;
+		}
+	} else switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+	case OHCI_USB_SUSPEND:
+		ohci->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES);
+		ohci->hc_control |= OHCI_USB_RESUME;
+		ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+		(void) ohci_readl (ohci, &ohci->regs->control);
+		ohci_dbg (ohci, "%s root hub\n",
+				autostopped ? "auto-start" : "resume");
+		break;
+	case OHCI_USB_RESUME:
+		/* HCFS changes sometime after INTR_RD */
+		ohci_dbg(ohci, "%swakeup root hub\n",
+				autostopped ? "auto-" : "");
+		break;
+	case OHCI_USB_OPER:
+		/* this can happen after resuming a swsusp snapshot */
+		ohci_dbg (ohci, "snapshot resume? reinit\n");
+		status = -EBUSY;
+		break;
+	default:		/* RESET, we lost power */
+		ohci_dbg (ohci, "lost power\n");
+		status = -EBUSY;
+	}
+	if (status == -EBUSY) {
+		if (!autostopped) {
+			spin_unlock_irq (&ohci->lock);
+			status = ohci_restart (ohci);
+
+			usb_root_hub_lost_power(hcd->self.root_hub);
+
+			spin_lock_irq (&ohci->lock);
+		}
+		return status;
+	}
+	if (status != -EINPROGRESS)
+		return status;
+	if (autostopped)
+		goto skip_resume;
+	spin_unlock_irq (&ohci->lock);
+
+	/* Some controllers (lucent erratum) need extra-long delays */
+	msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
+
+	temp = ohci_readl (ohci, &ohci->regs->control);
+	temp &= OHCI_CTRL_HCFS;
+	if (temp != OHCI_USB_RESUME) {
+		ohci_err (ohci, "controller won't resume\n");
+		spin_lock_irq(&ohci->lock);
+		return -EBUSY;
+	}
+
+	/* disable old schedule state, reinit from scratch */
+	ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
+	ohci_writel (ohci, 0, &ohci->regs->ed_controlcurrent);
+	ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
+	ohci_writel (ohci, 0, &ohci->regs->ed_bulkcurrent);
+	ohci_writel (ohci, 0, &ohci->regs->ed_periodcurrent);
+	ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);
+
+	/* Sometimes PCI D3 suspend trashes frame timings ... */
+	periodic_reinit (ohci);
+
+	/*
+	 * The following code is executed with ohci->lock held and
+	 * irqs disabled if and only if autostopped is true.  This
+	 * will cause sparse to warn about a "context imbalance".
+	 */
+skip_resume:
+	/* interrupts might have been disabled */
+	ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable);
+	if (ohci->ed_rm_list)
+		ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable);
+
+	/* Then re-enable operations */
+	ohci_writel (ohci, OHCI_USB_OPER, &ohci->regs->control);
+	(void) ohci_readl (ohci, &ohci->regs->control);
+	if (!autostopped)
+		msleep (3);
+
+	temp = ohci->hc_control;
+	temp &= OHCI_CTRL_RWC;
+	temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
+	ohci->hc_control = temp;
+	ohci_writel (ohci, temp, &ohci->regs->control);
+	(void) ohci_readl (ohci, &ohci->regs->control);
+
+	/* TRSMRCY */
+	if (!autostopped) {
+		msleep (10);
+		spin_lock_irq (&ohci->lock);
+	}
+	/* now ohci->lock is always held and irqs are always disabled */
+
+	/* keep it alive for more than ~5x suspend + resume costs */
+	ohci->next_statechange = jiffies + STATECHANGE_DELAY;
+
+	/* maybe turn schedules back on */
+	enables = 0;
+	temp = 0;
+	if (!ohci->ed_rm_list) {
+		if (ohci->ed_controltail) {
+			ohci_writel (ohci,
+					find_head (ohci->ed_controltail)->dma,
+					&ohci->regs->ed_controlhead);
+			enables |= OHCI_CTRL_CLE;
+			temp |= OHCI_CLF;
+		}
+		if (ohci->ed_bulktail) {
+			ohci_writel (ohci, find_head (ohci->ed_bulktail)->dma,
+				&ohci->regs->ed_bulkhead);
+			enables |= OHCI_CTRL_BLE;
+			temp |= OHCI_BLF;
+		}
+	}
+	if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs)
+		enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
+	if (enables) {
+		ohci_dbg (ohci, "restarting schedules ... %08x\n", enables);
+		ohci->hc_control |= enables;
+		ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+		if (temp)
+			ohci_writel (ohci, temp, &ohci->regs->cmdstatus);
+		(void) ohci_readl (ohci, &ohci->regs->control);
+	}
+
+	ohci->rh_state = OHCI_RH_RUNNING;
+	return 0;
+}
+
+static int ohci_bus_suspend (struct usb_hcd *hcd)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+	int			rc;
+
+	spin_lock_irq (&ohci->lock);
+
+	if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
+		rc = -ESHUTDOWN;
+	else
+		rc = ohci_rh_suspend (ohci, 0);
+	spin_unlock_irq (&ohci->lock);
+
+	if (rc == 0) {
+		del_timer_sync(&ohci->io_watchdog);
+		ohci->prev_frame_no = IO_WATCHDOG_OFF;
+	}
+	return rc;
+}
+
+static int ohci_bus_resume (struct usb_hcd *hcd)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+	int			rc;
+
+	if (time_before (jiffies, ohci->next_statechange))
+		msleep(5);
+
+	spin_lock_irq (&ohci->lock);
+
+	if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
+		rc = -ESHUTDOWN;
+	else
+		rc = ohci_rh_resume (ohci);
+	spin_unlock_irq (&ohci->lock);
+
+	/* poll until we know a device is connected or we autostop */
+	if (rc == 0)
+		usb_hcd_poll_rh_status(hcd);
+	return rc;
+}
+
+/* Carry out polling-, autostop-, and autoresume-related state changes */
+static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
+		int any_connected, int rhsc_status)
+{
+	int	poll_rh = 1;
+	int	rhsc_enable;
+
+	/* Some broken controllers never turn off RHSC in the interrupt
+	 * status register.  For their sake we won't re-enable RHSC
+	 * interrupts if the interrupt bit is already active.
+	 */
+	rhsc_enable = ohci_readl(ohci, &ohci->regs->intrenable) &
+			OHCI_INTR_RHSC;
+
+	switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+	case OHCI_USB_OPER:
+		/* If no status changes are pending, enable RHSC interrupts. */
+		if (!rhsc_enable && !rhsc_status && !changed) {
+			rhsc_enable = OHCI_INTR_RHSC;
+			ohci_writel(ohci, rhsc_enable, &ohci->regs->intrenable);
+		}
+
+		/* Keep on polling until we know a device is connected
+		 * and RHSC is enabled, or until we autostop.
+		 */
+		if (!ohci->autostop) {
+			if (any_connected ||
+					!device_may_wakeup(&ohci_to_hcd(ohci)
+						->self.root_hub->dev)) {
+				if (rhsc_enable)
+					poll_rh = 0;
+			} else {
+				ohci->autostop = 1;
+				ohci->next_statechange = jiffies + HZ;
+			}
+
+		/* if no devices have been attached for one second, autostop */
+		} else {
+			if (changed || any_connected) {
+				ohci->autostop = 0;
+				ohci->next_statechange = jiffies +
+						STATECHANGE_DELAY;
+			} else if (time_after_eq(jiffies,
+						ohci->next_statechange)
+					&& !ohci->ed_rm_list
+					&& !(ohci->hc_control &
+						OHCI_SCHED_ENABLES)) {
+				ohci_rh_suspend(ohci, 1);
+				if (rhsc_enable)
+					poll_rh = 0;
+			}
+		}
+		break;
+
+	case OHCI_USB_SUSPEND:
+	case OHCI_USB_RESUME:
+		/* if there is a port change, autostart or ask to be resumed */
+		if (changed) {
+			if (ohci->autostop)
+				ohci_rh_resume(ohci);
+			else
+				usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
+
+		/* If remote wakeup is disabled, stop polling */
+		} else if (!ohci->autostop &&
+				!ohci_to_hcd(ohci)->self.root_hub->
+					do_remote_wakeup) {
+			poll_rh = 0;
+
+		} else {
+			/* If no status changes are pending,
+			 * enable RHSC interrupts
+			 */
+			if (!rhsc_enable && !rhsc_status) {
+				rhsc_enable = OHCI_INTR_RHSC;
+				ohci_writel(ohci, rhsc_enable,
+						&ohci->regs->intrenable);
+			}
+			/* Keep polling until RHSC is enabled */
+			if (rhsc_enable)
+				poll_rh = 0;
+		}
+		break;
+	}
+	return poll_rh;
+}
+
+#else	/* CONFIG_PM */
+
+static inline int ohci_rh_resume(struct ohci_hcd *ohci)
+{
+	return 0;
+}
+
+/* Carry out polling-related state changes.
+ * autostop isn't used when CONFIG_PM is turned off.
+ */
+static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
+		int any_connected, int rhsc_status)
+{
+	/* If RHSC is enabled, don't poll */
+	if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
+		return 0;
+
+	/* If status changes are pending, continue polling.
+	 * Conversely, if no status changes are pending but the RHSC
+	 * status bit was set, then RHSC may be broken so continue polling.
+	 */
+	if (changed || rhsc_status)
+		return 1;
+
+	/* It's safe to re-enable RHSC interrupts */
+	ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+	return 0;
+}
+
+#endif	/* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+/* build "status change" packet (one or two bytes) from HC registers */
+
+int ohci_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+	int		i, changed = 0, length = 1;
+	int		any_connected = 0;
+	int		rhsc_status;
+	unsigned long	flags;
+
+	spin_lock_irqsave (&ohci->lock, flags);
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		goto done;
+
+	/* undocumented erratum seen on at least rev D */
+	if ((ohci->flags & OHCI_QUIRK_AMD756)
+			&& (roothub_a (ohci) & RH_A_NDP) > MAX_ROOT_PORTS) {
+		ohci_warn (ohci, "bogus NDP, rereads as NDP=%d\n",
+			  ohci_readl (ohci, &ohci->regs->roothub.a) & RH_A_NDP);
+		/* retry later; "should not happen" */
+		goto done;
+	}
+
+	/* init status */
+	if (roothub_status (ohci) & (RH_HS_LPSC | RH_HS_OCIC))
+		buf [0] = changed = 1;
+	else
+		buf [0] = 0;
+	if (ohci->num_ports > 7) {
+		buf [1] = 0;
+		length++;
+	}
+
+	/* Clear the RHSC status flag before reading the port statuses */
+	ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrstatus);
+	rhsc_status = ohci_readl(ohci, &ohci->regs->intrstatus) &
+			OHCI_INTR_RHSC;
+
+	/* look at each port */
+	for (i = 0; i < ohci->num_ports; i++) {
+		u32	status = roothub_portstatus (ohci, i);
+
+		/* can't autostop if ports are connected */
+		any_connected |= (status & RH_PS_CCS);
+
+		if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
+				| RH_PS_OCIC | RH_PS_PRSC)) {
+			changed = 1;
+			if (i < 7)
+			    buf [0] |= 1 << (i + 1);
+			else
+			    buf [1] |= 1 << (i - 7);
+		}
+	}
+
+	if (ohci_root_hub_state_changes(ohci, changed,
+			any_connected, rhsc_status))
+		set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	else
+		clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+
+done:
+	spin_unlock_irqrestore (&ohci->lock, flags);
+
+	return changed ? length : 0;
+}
+EXPORT_SYMBOL_GPL(ohci_hub_status_data);
+
+/*-------------------------------------------------------------------------*/
+
+static void
+ohci_hub_descriptor (
+	struct ohci_hcd			*ohci,
+	struct usb_hub_descriptor	*desc
+) {
+	u32		rh = roothub_a (ohci);
+	u16		temp;
+
+	desc->bDescriptorType = USB_DT_HUB;
+	desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24;
+	desc->bHubContrCurrent = 0;
+
+	desc->bNbrPorts = ohci->num_ports;
+	temp = 1 + (ohci->num_ports / 8);
+	desc->bDescLength = 7 + 2 * temp;
+
+	temp = HUB_CHAR_COMMON_LPSM | HUB_CHAR_COMMON_OCPM;
+	if (rh & RH_A_NPS)		/* no power switching? */
+		temp |= HUB_CHAR_NO_LPSM;
+	if (rh & RH_A_PSM)		/* per-port power switching? */
+		temp |= HUB_CHAR_INDV_PORT_LPSM;
+	if (rh & RH_A_NOCP)		/* no overcurrent reporting? */
+		temp |= HUB_CHAR_NO_OCPM;
+	else if (rh & RH_A_OCPM)	/* per-port overcurrent reporting? */
+		temp |= HUB_CHAR_INDV_PORT_OCPM;
+	desc->wHubCharacteristics = cpu_to_le16(temp);
+
+	/* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+	rh = roothub_b (ohci);
+	memset(desc->u.hs.DeviceRemovable, 0xff,
+			sizeof(desc->u.hs.DeviceRemovable));
+	desc->u.hs.DeviceRemovable[0] = rh & RH_B_DR;
+	if (ohci->num_ports > 7) {
+		desc->u.hs.DeviceRemovable[1] = (rh & RH_B_DR) >> 8;
+		desc->u.hs.DeviceRemovable[2] = 0xff;
+	} else
+		desc->u.hs.DeviceRemovable[1] = 0xff;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_USB_OTG
+
+static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+	u32			status;
+
+	if (!port)
+		return -EINVAL;
+	port--;
+
+	/* start port reset before HNP protocol times out */
+	status = ohci_readl(ohci, &ohci->regs->roothub.portstatus [port]);
+	if (!(status & RH_PS_CCS))
+		return -ENODEV;
+
+	/* hub_wq will finish the reset later */
+	ohci_writel(ohci, RH_PS_PRS, &ohci->regs->roothub.portstatus [port]);
+	return 0;
+}
+
+#else
+
+#define	ohci_start_port_reset		NULL
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+
+/* See usb 7.1.7.5:  root hubs must issue at least 50 msec reset signaling,
+ * not necessarily continuous ... to guard against resume signaling.
+ */
+#define	PORT_RESET_MSEC		50
+
+/* this timer value might be vendor-specific ... */
+#define	PORT_RESET_HW_MSEC	10
+
+/* wrap-aware logic morphed from <linux/jiffies.h> */
+#define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
+
+/* called from some task, normally hub_wq */
+static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port)
+{
+	__hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
+	u32	temp = 0;
+	u16	now = ohci_readl(ohci, &ohci->regs->fmnumber);
+	u16	reset_done = now + PORT_RESET_MSEC;
+	int	limit_1 = DIV_ROUND_UP(PORT_RESET_MSEC, PORT_RESET_HW_MSEC);
+
+	/* build a "continuous enough" reset signal, with up to
+	 * 3msec gap between pulses.  scheduler HZ==100 must work;
+	 * this might need to be deadline-scheduled.
+	 */
+	do {
+		int limit_2;
+
+		/* spin until any current reset finishes */
+		limit_2 = PORT_RESET_HW_MSEC * 2;
+		while (--limit_2 >= 0) {
+			temp = ohci_readl (ohci, portstat);
+			/* handle e.g. CardBus eject */
+			if (temp == ~(u32)0)
+				return -ESHUTDOWN;
+			if (!(temp & RH_PS_PRS))
+				break;
+			udelay (500);
+		}
+
+		/* timeout (a hardware error) has been observed when
+		 * EHCI sets CF while this driver is resetting a port;
+		 * presumably other disconnect paths might do it too.
+		 */
+		if (limit_2 < 0) {
+			ohci_dbg(ohci,
+				"port[%d] reset timeout, stat %08x\n",
+				port, temp);
+			break;
+		}
+
+		if (!(temp & RH_PS_CCS))
+			break;
+		if (temp & RH_PS_PRSC)
+			ohci_writel (ohci, RH_PS_PRSC, portstat);
+
+		/* start the next reset, sleep till it's probably done */
+		ohci_writel (ohci, RH_PS_PRS, portstat);
+		msleep(PORT_RESET_HW_MSEC);
+		now = ohci_readl(ohci, &ohci->regs->fmnumber);
+	} while (tick_before(now, reset_done) && --limit_1 >= 0);
+
+	/* caller synchronizes using PRSC ... and handles PRS
+	 * still being set when this returns.
+	 */
+
+	return 0;
+}
+
+int ohci_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength
+) {
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+	int		ports = ohci->num_ports;
+	u32		temp;
+	int		retval = 0;
+
+	if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
+		return -ESHUTDOWN;
+
+	switch (typeReq) {
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+			ohci_writel (ohci, RH_HS_OCIC,
+					&ohci->regs->roothub.status);
+			break;
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			temp = RH_PS_CCS;
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			temp = RH_PS_PESC;
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			temp = RH_PS_POCI;
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			temp = RH_PS_PSSC;
+			break;
+		case USB_PORT_FEAT_POWER:
+			temp = RH_PS_LSDA;
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			temp = RH_PS_CSC;
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			temp = RH_PS_OCIC;
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			temp = RH_PS_PRSC;
+			break;
+		default:
+			goto error;
+		}
+		ohci_writel (ohci, temp,
+				&ohci->regs->roothub.portstatus [wIndex]);
+		// ohci_readl (ohci, &ohci->regs->roothub.portstatus [wIndex]);
+		break;
+	case GetHubDescriptor:
+		ohci_hub_descriptor (ohci, (struct usb_hub_descriptor *) buf);
+		break;
+	case GetHubStatus:
+		temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE);
+		put_unaligned_le32(temp, buf);
+		break;
+	case GetPortStatus:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		temp = roothub_portstatus (ohci, wIndex);
+		put_unaligned_le32(temp, buf);
+
+		if (*(u16*)(buf+2))	/* only if wPortChange is interesting */
+			dbg_port(ohci, "GetStatus", wIndex, temp);
+		break;
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+			// FIXME:  this can be cleared, yes?
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetPortFeature:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+#ifdef	CONFIG_USB_OTG
+			if (hcd->self.otg_port == (wIndex + 1)
+					&& hcd->self.b_hnp_enable)
+				ohci->start_hnp(ohci);
+			else
+#endif
+			ohci_writel (ohci, RH_PS_PSS,
+				&ohci->regs->roothub.portstatus [wIndex]);
+			break;
+		case USB_PORT_FEAT_POWER:
+			ohci_writel (ohci, RH_PS_PPS,
+				&ohci->regs->roothub.portstatus [wIndex]);
+			break;
+		case USB_PORT_FEAT_RESET:
+			retval = root_port_reset (ohci, wIndex);
+			break;
+		default:
+			goto error;
+		}
+		break;
+
+	default:
+error:
+		/* "protocol stall" on error */
+		retval = -EPIPE;
+	}
+	return retval;
+}
+EXPORT_SYMBOL_GPL(ohci_hub_control);
diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c
new file mode 100644
index 000000000..1425335c6
--- /dev/null
+++ b/drivers/usb/host/ohci-mem.c
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * This file is licenced under the GPL.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * OHCI deals with three types of memory:
+ *	- data used only by the HCD ... kmalloc is fine
+ *	- async and periodic schedules, shared by HC and HCD ... these
+ *	  need to use dma_pool or dma_alloc_coherent
+ *	- driver buffers, read/written by HC ... the hcd glue or the
+ *	  device driver provides us with dma addresses
+ *
+ * There's also "register" data, which is memory mapped.
+ * No memory seen by this driver (or any HCD) may be paged out.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+static void ohci_hcd_init (struct ohci_hcd *ohci)
+{
+	ohci->next_statechange = jiffies;
+	spin_lock_init (&ohci->lock);
+	INIT_LIST_HEAD (&ohci->pending);
+	INIT_LIST_HEAD(&ohci->eds_in_use);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int ohci_mem_init (struct ohci_hcd *ohci)
+{
+	/*
+	 * HCs with local memory allocate from localmem_pool so there's
+	 * no need to create the below dma pools.
+	 */
+	if (ohci_to_hcd(ohci)->localmem_pool)
+		return 0;
+
+	ohci->td_cache = dma_pool_create ("ohci_td",
+		ohci_to_hcd(ohci)->self.controller,
+		sizeof (struct td),
+		32 /* byte alignment */,
+		0 /* no page-crossing issues */);
+	if (!ohci->td_cache)
+		return -ENOMEM;
+	ohci->ed_cache = dma_pool_create ("ohci_ed",
+		ohci_to_hcd(ohci)->self.controller,
+		sizeof (struct ed),
+		16 /* byte alignment */,
+		0 /* no page-crossing issues */);
+	if (!ohci->ed_cache) {
+		dma_pool_destroy (ohci->td_cache);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static void ohci_mem_cleanup (struct ohci_hcd *ohci)
+{
+	dma_pool_destroy(ohci->td_cache);
+	ohci->td_cache = NULL;
+	dma_pool_destroy(ohci->ed_cache);
+	ohci->ed_cache = NULL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* ohci "done list" processing needs this mapping */
+static inline struct td *
+dma_to_td (struct ohci_hcd *hc, dma_addr_t td_dma)
+{
+	struct td *td;
+
+	td_dma &= TD_MASK;
+	td = hc->td_hash [TD_HASH_FUNC(td_dma)];
+	while (td && td->td_dma != td_dma)
+		td = td->td_hash;
+	return td;
+}
+
+/* TDs ... */
+static struct td *
+td_alloc (struct ohci_hcd *hc, gfp_t mem_flags)
+{
+	dma_addr_t	dma;
+	struct td	*td;
+	struct usb_hcd	*hcd = ohci_to_hcd(hc);
+
+	if (hcd->localmem_pool)
+		td = gen_pool_dma_zalloc_align(hcd->localmem_pool,
+				sizeof(*td), &dma, 32);
+	else
+		td = dma_pool_zalloc(hc->td_cache, mem_flags, &dma);
+	if (td) {
+		/* in case hc fetches it, make it look dead */
+		td->hwNextTD = cpu_to_hc32 (hc, dma);
+		td->td_dma = dma;
+		/* hashed in td_fill */
+	}
+	return td;
+}
+
+static void
+td_free (struct ohci_hcd *hc, struct td *td)
+{
+	struct td	**prev = &hc->td_hash [TD_HASH_FUNC (td->td_dma)];
+	struct usb_hcd	*hcd = ohci_to_hcd(hc);
+
+	while (*prev && *prev != td)
+		prev = &(*prev)->td_hash;
+	if (*prev)
+		*prev = td->td_hash;
+	else if ((td->hwINFO & cpu_to_hc32(hc, TD_DONE)) != 0)
+		ohci_dbg (hc, "no hash for td %p\n", td);
+
+	if (hcd->localmem_pool)
+		gen_pool_free(hcd->localmem_pool, (unsigned long)td,
+			      sizeof(*td));
+	else
+		dma_pool_free(hc->td_cache, td, td->td_dma);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* EDs ... */
+static struct ed *
+ed_alloc (struct ohci_hcd *hc, gfp_t mem_flags)
+{
+	dma_addr_t	dma;
+	struct ed	*ed;
+	struct usb_hcd	*hcd = ohci_to_hcd(hc);
+
+	if (hcd->localmem_pool)
+		ed = gen_pool_dma_zalloc_align(hcd->localmem_pool,
+				sizeof(*ed), &dma, 16);
+	else
+		ed = dma_pool_zalloc(hc->ed_cache, mem_flags, &dma);
+	if (ed) {
+		INIT_LIST_HEAD (&ed->td_list);
+		ed->dma = dma;
+	}
+	return ed;
+}
+
+static void
+ed_free (struct ohci_hcd *hc, struct ed *ed)
+{
+	struct usb_hcd	*hcd = ohci_to_hcd(hc);
+
+	if (hcd->localmem_pool)
+		gen_pool_free(hcd->localmem_pool, (unsigned long)ed,
+			      sizeof(*ed));
+	else
+		dma_pool_free(hc->ed_cache, ed, ed->dma);
+}
+
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
new file mode 100644
index 000000000..5b32e683e
--- /dev/null
+++ b/drivers/usb/host/ohci-nxp.c
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * driver for NXP USB Host devices
+ *
+ * Currently supported OHCI host devices:
+ * - NXP LPC32xx
+ *
+ * Authors: Dmitry Chigirev <source@mvista.com>
+ *	    Vitaly Wool <vitalywool@gmail.com>
+ *
+ * register initialization is based on code examples provided by Philips
+ * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
+ *
+ * NOTE: This driver does not have suspend/resume functionality
+ * This driver is intended for engineering development purposes only
+ *
+ * 2005-2006 (c) MontaVista Software, Inc.
+ */
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/usb/isp1301.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+
+#define USB_CONFIG_BASE		0x31020000
+
+/* USB_OTG_STAT_CONTROL bit defines */
+#define TRANSPARENT_I2C_EN	(1 << 7)
+#define HOST_EN			(1 << 0)
+
+/* On LPC32xx, those are undefined */
+#ifndef start_int_set_falling_edge
+#define start_int_set_falling_edge(irq)
+#define start_int_set_rising_edge(irq)
+#define start_int_ack(irq)
+#define start_int_mask(irq)
+#define start_int_umask(irq)
+#endif
+
+#define DRIVER_DESC "OHCI NXP driver"
+
+static const char hcd_name[] = "ohci-nxp";
+static struct hc_driver __read_mostly ohci_nxp_hc_driver;
+
+static struct i2c_client *isp1301_i2c_client;
+
+static struct clk *usb_host_clk;
+
+static void isp1301_configure_lpc32xx(void)
+{
+	/* LPC32XX only supports DAT_SE0 USB mode */
+	/* This sequence is important */
+
+	/* Disable transparent UART mode first */
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		(ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
+		MC1_UART_EN);
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		(ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
+		~MC1_SPEED_REG);
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+				  ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		  (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR),
+		  ~0);
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		ISP1301_I2C_MODE_CONTROL_2,
+		(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		ISP1301_I2C_OTG_CONTROL_1,
+		(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
+		(OTG1_DM_PULLUP | OTG1_DP_PULLUP));
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
+		~0);
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
+
+	printk(KERN_INFO "ISP1301 Vendor ID  : 0x%04x\n",
+	      i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
+	printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
+	      i2c_smbus_read_word_data(isp1301_i2c_client, 0x02));
+	printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n",
+	      i2c_smbus_read_word_data(isp1301_i2c_client, 0x14));
+}
+
+static void isp1301_configure(void)
+{
+	isp1301_configure_lpc32xx();
+}
+
+static inline void isp1301_vbus_on(void)
+{
+	i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_OTG_CONTROL_1,
+				  OTG1_VBUS_DRV);
+}
+
+static inline void isp1301_vbus_off(void)
+{
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
+		OTG1_VBUS_DRV);
+}
+
+static void ohci_nxp_start_hc(void)
+{
+	void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4);
+	unsigned long tmp;
+
+	if (WARN_ON(!usb_otg_stat_control))
+		return;
+
+	tmp = __raw_readl(usb_otg_stat_control) | HOST_EN;
+
+	__raw_writel(tmp, usb_otg_stat_control);
+	isp1301_vbus_on();
+
+	iounmap(usb_otg_stat_control);
+}
+
+static void ohci_nxp_stop_hc(void)
+{
+	void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4);
+	unsigned long tmp;
+
+	if (WARN_ON(!usb_otg_stat_control))
+		return;
+
+	isp1301_vbus_off();
+	tmp = __raw_readl(usb_otg_stat_control) & ~HOST_EN;
+	__raw_writel(tmp, usb_otg_stat_control);
+
+	iounmap(usb_otg_stat_control);
+}
+
+static int ohci_hcd_nxp_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = NULL;
+	const struct hc_driver *driver = &ohci_nxp_hc_driver;
+	struct resource *res;
+	int ret = 0, irq;
+	struct device_node *isp1301_node;
+
+	if (pdev->dev.of_node) {
+		isp1301_node = of_parse_phandle(pdev->dev.of_node,
+						"transceiver", 0);
+	} else {
+		isp1301_node = NULL;
+	}
+
+	isp1301_i2c_client = isp1301_get_client(isp1301_node);
+	of_node_put(isp1301_node);
+	if (!isp1301_i2c_client)
+		return -EPROBE_DEFER;
+
+	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		goto fail_disable;
+
+	dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
+	if (usb_disabled()) {
+		dev_err(&pdev->dev, "USB is disabled\n");
+		ret = -ENODEV;
+		goto fail_disable;
+	}
+
+	/* Enable USB host clock */
+	usb_host_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(usb_host_clk)) {
+		dev_err(&pdev->dev, "failed to acquire USB OHCI clock\n");
+		ret = PTR_ERR(usb_host_clk);
+		goto fail_disable;
+	}
+
+	ret = clk_prepare_enable(usb_host_clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to start USB OHCI clock\n");
+		goto fail_disable;
+	}
+
+	isp1301_configure();
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
+		ret = -ENOMEM;
+		goto fail_hcd;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(hcd->regs)) {
+		ret = PTR_ERR(hcd->regs);
+		goto fail_resource;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = -ENXIO;
+		goto fail_resource;
+	}
+
+	ohci_nxp_start_hc();
+	platform_set_drvdata(pdev, hcd);
+
+	dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
+	ret = usb_add_hcd(hcd, irq, 0);
+	if (ret == 0) {
+		device_wakeup_enable(hcd->self.controller);
+		return ret;
+	}
+
+	ohci_nxp_stop_hc();
+fail_resource:
+	usb_put_hcd(hcd);
+fail_hcd:
+	clk_disable_unprepare(usb_host_clk);
+fail_disable:
+	isp1301_i2c_client = NULL;
+	return ret;
+}
+
+static int ohci_hcd_nxp_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	ohci_nxp_stop_hc();
+	usb_put_hcd(hcd);
+	clk_disable_unprepare(usb_host_clk);
+	isp1301_i2c_client = NULL;
+
+	return 0;
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:usb-ohci");
+
+#ifdef CONFIG_OF
+static const struct of_device_id ohci_hcd_nxp_match[] = {
+	{ .compatible = "nxp,ohci-nxp" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ohci_hcd_nxp_match);
+#endif
+
+static struct platform_driver ohci_hcd_nxp_driver = {
+	.driver = {
+		.name = "usb-ohci",
+		.of_match_table = of_match_ptr(ohci_hcd_nxp_match),
+	},
+	.probe = ohci_hcd_nxp_probe,
+	.remove = ohci_hcd_nxp_remove,
+};
+
+static int __init ohci_nxp_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ohci_init_driver(&ohci_nxp_hc_driver, NULL);
+	return platform_driver_register(&ohci_hcd_nxp_driver);
+}
+module_init(ohci_nxp_init);
+
+static void __exit ohci_nxp_cleanup(void)
+{
+	platform_driver_unregister(&ohci_hcd_nxp_driver);
+}
+module_exit(ohci_nxp_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
new file mode 100644
index 000000000..cb29701df
--- /dev/null
+++ b/drivers/usb/host/ohci-omap.c
@@ -0,0 +1,439 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2005 David Brownell
+ * (C) Copyright 2002 Hewlett-Packard Company
+ *
+ * OMAP Bus Glue
+ *
+ * Modified for OMAP by Tony Lindgren <tony@atomide.com>
+ * Based on the 2.4 OMAP OHCI driver originally done by MontaVista Software Inc.
+ * and on ohci-sa1111.c by Christopher Hoover <ch@hpl.hp.com>
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb/otg.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
+#include <linux/soc/ti/omap1-mux.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/signal.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+
+#include <asm/io.h>
+#include <asm/mach-types.h>
+
+#define DRIVER_DESC "OHCI OMAP driver"
+
+struct ohci_omap_priv {
+	struct clk *usb_host_ck;
+	struct clk *usb_dc_ck;
+	struct gpio_desc *power;
+	struct gpio_desc *overcurrent;
+};
+
+static const char hcd_name[] = "ohci-omap";
+static struct hc_driver __read_mostly ohci_omap_hc_driver;
+
+#define hcd_to_ohci_omap_priv(h) \
+	((struct ohci_omap_priv *)hcd_to_ohci(h)->priv)
+
+static void omap_ohci_clock_power(struct ohci_omap_priv *priv, int on)
+{
+	if (on) {
+		clk_enable(priv->usb_dc_ck);
+		clk_enable(priv->usb_host_ck);
+		/* guesstimate for T5 == 1x 32K clock + APLL lock time */
+		udelay(100);
+	} else {
+		clk_disable(priv->usb_host_ck);
+		clk_disable(priv->usb_dc_ck);
+	}
+}
+
+#ifdef	CONFIG_USB_OTG
+
+static void start_hnp(struct ohci_hcd *ohci)
+{
+	struct usb_hcd *hcd = ohci_to_hcd(ohci);
+	const unsigned	port = hcd->self.otg_port - 1;
+	unsigned long	flags;
+	u32 l;
+
+	otg_start_hnp(hcd->usb_phy->otg);
+
+	local_irq_save(flags);
+	hcd->usb_phy->otg->state = OTG_STATE_A_SUSPEND;
+	writel (RH_PS_PSS, &ohci->regs->roothub.portstatus [port]);
+	l = omap_readl(OTG_CTRL);
+	l &= ~OTG_A_BUSREQ;
+	omap_writel(l, OTG_CTRL);
+	local_irq_restore(flags);
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static int ohci_omap_reset(struct usb_hcd *hcd)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci(hcd);
+	struct omap_usb_config	*config = dev_get_platdata(hcd->self.controller);
+	struct ohci_omap_priv	*priv = hcd_to_ohci_omap_priv(hcd);
+	int			need_transceiver = (config->otg != 0);
+	int			ret;
+
+	dev_dbg(hcd->self.controller, "starting USB Controller\n");
+
+	if (config->otg) {
+		hcd->self.otg_port = config->otg;
+		/* default/minimum OTG power budget:  8 mA */
+		hcd->power_budget = 8;
+	}
+
+	/* boards can use OTG transceivers in non-OTG modes */
+	need_transceiver = need_transceiver
+			|| machine_is_omap_h2() || machine_is_omap_h3();
+
+	/* XXX OMAP16xx only */
+	if (config->ocpi_enable)
+		config->ocpi_enable();
+
+#ifdef	CONFIG_USB_OTG
+	if (need_transceiver) {
+		hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
+		if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
+			int	status = otg_set_host(hcd->usb_phy->otg,
+						&ohci_to_hcd(ohci)->self);
+			dev_dbg(hcd->self.controller, "init %s phy, status %d\n",
+					hcd->usb_phy->label, status);
+			if (status) {
+				usb_put_phy(hcd->usb_phy);
+				return status;
+			}
+		} else {
+			return -EPROBE_DEFER;
+		}
+		hcd->skip_phy_initialization = 1;
+		ohci->start_hnp = start_hnp;
+	}
+#endif
+
+	omap_ohci_clock_power(priv, 1);
+
+	if (config->lb_reset)
+		config->lb_reset();
+
+	ret = ohci_setup(hcd);
+	if (ret < 0)
+		return ret;
+
+	if (config->otg || config->rwc) {
+		ohci->hc_control = OHCI_CTRL_RWC;
+		writel(OHCI_CTRL_RWC, &ohci->regs->control);
+	}
+
+	/* board-specific power switching and overcurrent support */
+	if (machine_is_omap_osk() || machine_is_omap_innovator()) {
+		u32	rh = roothub_a (ohci);
+
+		/* power switching (ganged by default) */
+		rh &= ~RH_A_NPS;
+
+		/* TPS2045 switch for internal transceiver (port 1) */
+		if (machine_is_omap_osk()) {
+			ohci_to_hcd(ohci)->power_budget = 250;
+
+			rh &= ~RH_A_NOCP;
+
+			/* gpio9 for overcurrent detction */
+			omap_cfg_reg(W8_1610_GPIO9);
+
+			/* for paranoia's sake:  disable USB.PUEN */
+			omap_cfg_reg(W4_USB_HIGHZ);
+		}
+		ohci_writel(ohci, rh, &ohci->regs->roothub.a);
+		ohci->flags &= ~OHCI_QUIRK_HUB_POWER;
+	} else if (machine_is_nokia770()) {
+		/* We require a self-powered hub, which should have
+		 * plenty of power. */
+		ohci_to_hcd(ohci)->power_budget = 0;
+	}
+
+	/* FIXME hub_wq hub requests should manage power switching */
+	if (config->transceiver_power)
+		return config->transceiver_power(1);
+
+	if (priv->power)
+		gpiod_set_value_cansleep(priv->power, 0);
+
+	/* board init will have already handled HMC and mux setup.
+	 * any external transceiver should already be initialized
+	 * too, so all configured ports use the right signaling now.
+	 */
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * ohci_hcd_omap_probe - initialize OMAP-based HCDs
+ * @pdev:	USB controller to probe
+ *
+ * Context: task context, might sleep
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ */
+static int ohci_hcd_omap_probe(struct platform_device *pdev)
+{
+	int retval, irq;
+	struct usb_hcd *hcd = 0;
+	struct ohci_omap_priv *priv;
+
+	if (pdev->num_resources != 2) {
+		dev_err(&pdev->dev, "invalid num_resources: %i\n",
+		       pdev->num_resources);
+		return -ENODEV;
+	}
+
+	if (pdev->resource[0].flags != IORESOURCE_MEM
+			|| pdev->resource[1].flags != IORESOURCE_IRQ) {
+		dev_err(&pdev->dev, "invalid resource type\n");
+		return -ENODEV;
+	}
+
+	hcd = usb_create_hcd(&ohci_omap_hc_driver, &pdev->dev,
+			dev_name(&pdev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	hcd->rsrc_start = pdev->resource[0].start;
+	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+	priv = hcd_to_ohci_omap_priv(hcd);
+
+	/* Obtain two optional GPIO lines */
+	priv->power = devm_gpiod_get_optional(&pdev->dev, "power", GPIOD_ASIS);
+	if (IS_ERR(priv->power)) {
+		retval = PTR_ERR(priv->power);
+		goto err_put_hcd;
+	}
+	if (priv->power)
+		gpiod_set_consumer_name(priv->power, "OHCI power");
+
+	/*
+	 * This "overcurrent" GPIO line isn't really used in the code,
+	 * but has a designated hardware function.
+	 * TODO: implement proper overcurrent handling.
+	 */
+	priv->overcurrent = devm_gpiod_get_optional(&pdev->dev, "overcurrent",
+						    GPIOD_IN);
+	if (IS_ERR(priv->overcurrent)) {
+		retval = PTR_ERR(priv->overcurrent);
+		goto err_put_hcd;
+	}
+	if (priv->overcurrent)
+		gpiod_set_consumer_name(priv->overcurrent, "OHCI overcurrent");
+
+	priv->usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck");
+	if (IS_ERR(priv->usb_host_ck)) {
+		retval = PTR_ERR(priv->usb_host_ck);
+		goto err_put_hcd;
+	}
+
+	retval = clk_prepare(priv->usb_host_ck);
+	if (retval)
+		goto err_put_host_ck;
+
+	if (!cpu_is_omap15xx())
+		priv->usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck");
+	else
+		priv->usb_dc_ck = clk_get(&pdev->dev, "lb_ck");
+
+	if (IS_ERR(priv->usb_dc_ck)) {
+		retval = PTR_ERR(priv->usb_dc_ck);
+		goto err_unprepare_host_ck;
+	}
+
+	retval = clk_prepare(priv->usb_dc_ck);
+	if (retval)
+		goto err_put_dc_ck;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		dev_dbg(&pdev->dev, "request_mem_region failed\n");
+		retval = -EBUSY;
+		goto err_unprepare_dc_ck;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_err(&pdev->dev, "can't ioremap OHCI HCD\n");
+		retval = -ENOMEM;
+		goto err2;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		retval = irq;
+		goto err3;
+	}
+	retval = usb_add_hcd(hcd, irq, 0);
+	if (retval)
+		goto err3;
+
+	device_wakeup_enable(hcd->self.controller);
+	return 0;
+err3:
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err_unprepare_dc_ck:
+	clk_unprepare(priv->usb_dc_ck);
+err_put_dc_ck:
+	clk_put(priv->usb_dc_ck);
+err_unprepare_host_ck:
+	clk_unprepare(priv->usb_host_ck);
+err_put_host_ck:
+	clk_put(priv->usb_host_ck);
+err_put_hcd:
+	usb_put_hcd(hcd);
+	return retval;
+}
+
+
+/* may be called with controller, bus, and devices active */
+
+/**
+ * ohci_hcd_omap_remove - shutdown processing for OMAP-based HCDs
+ * @pdev: USB Host Controller being removed
+ *
+ * Context: task context, might sleep
+ *
+ * Reverses the effect of ohci_hcd_omap_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ */
+static int ohci_hcd_omap_remove(struct platform_device *pdev)
+{
+	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
+	struct ohci_omap_priv *priv = hcd_to_ohci_omap_priv(hcd);
+
+	dev_dbg(hcd->self.controller, "stopping USB Controller\n");
+	usb_remove_hcd(hcd);
+	omap_ohci_clock_power(priv, 0);
+	if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
+		(void) otg_set_host(hcd->usb_phy->otg, 0);
+		usb_put_phy(hcd->usb_phy);
+	}
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	clk_unprepare(priv->usb_dc_ck);
+	clk_put(priv->usb_dc_ck);
+	clk_unprepare(priv->usb_host_ck);
+	clk_put(priv->usb_host_ck);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_PM
+
+static int ohci_omap_suspend(struct platform_device *pdev, pm_message_t message)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	struct ohci_omap_priv *priv = hcd_to_ohci_omap_priv(hcd);
+	bool do_wakeup = device_may_wakeup(&pdev->dev);
+	int ret;
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ret = ohci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+
+	omap_ohci_clock_power(priv, 0);
+	return ret;
+}
+
+static int ohci_omap_resume(struct platform_device *dev)
+{
+	struct usb_hcd	*hcd = platform_get_drvdata(dev);
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	struct ohci_omap_priv *priv = hcd_to_ohci_omap_priv(hcd);
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	omap_ohci_clock_power(priv, 1);
+	ohci_resume(hcd, false);
+	return 0;
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Driver definition to register with the OMAP bus
+ */
+static struct platform_driver ohci_hcd_omap_driver = {
+	.probe		= ohci_hcd_omap_probe,
+	.remove		= ohci_hcd_omap_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+#ifdef	CONFIG_PM
+	.suspend	= ohci_omap_suspend,
+	.resume		= ohci_omap_resume,
+#endif
+	.driver		= {
+		.name	= "ohci",
+	},
+};
+
+static const struct ohci_driver_overrides omap_overrides __initconst = {
+	.product_desc	= "OMAP OHCI",
+	.reset		= ohci_omap_reset,
+	.extra_priv_size = sizeof(struct ohci_omap_priv),
+};
+
+static int __init ohci_omap_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ohci_init_driver(&ohci_omap_hc_driver, &omap_overrides);
+	return platform_driver_register(&ohci_hcd_omap_driver);
+}
+module_init(ohci_omap_init);
+
+static void __exit ohci_omap_cleanup(void)
+{
+	platform_driver_unregister(&ohci_hcd_omap_driver);
+}
+module_exit(ohci_omap_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_ALIAS("platform:ohci");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
new file mode 100644
index 000000000..d7b4f40f9
--- /dev/null
+++ b/drivers/usb/host/ohci-pci.c
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * [ Initialisation is based on Linus'  ]
+ * [ uhci code and gregs ohci fragments ]
+ * [ (C) Copyright 1999 Linus Torvalds  ]
+ * [ (C) Copyright 1999 Gregory P. Smith]
+ *
+ * PCI Bus Glue
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+#include "pci-quirks.h"
+
+#define DRIVER_DESC "OHCI PCI platform driver"
+
+static const char hcd_name[] = "ohci-pci";
+
+
+/*-------------------------------------------------------------------------*/
+
+static int broken_suspend(struct usb_hcd *hcd)
+{
+	device_init_wakeup(&hcd->self.root_hub->dev, 0);
+	return 0;
+}
+
+/* AMD 756, for most chips (early revs), corrupts register
+ * values on read ... so enable the vendor workaround.
+ */
+static int ohci_quirk_amd756(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+
+	ohci->flags = OHCI_QUIRK_AMD756;
+	ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
+
+	/* also erratum 10 (suspend/resume issues) */
+	return broken_suspend(hcd);
+}
+
+/* Apple's OHCI driver has a lot of bizarre workarounds
+ * for this chip.  Evidently control and bulk lists
+ * can get confused.  (B&W G3 models, and ...)
+ */
+static int ohci_quirk_opti(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+
+	ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n");
+
+	return 0;
+}
+
+/* Check for NSC87560. We have to look at the bridge (fn1) to
+ * identify the USB (fn2). This quirk might apply to more or
+ * even all NSC stuff.
+ */
+static int ohci_quirk_ns(struct usb_hcd *hcd)
+{
+	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+	struct pci_dev	*b;
+
+	b  = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
+	if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
+	    && b->vendor == PCI_VENDOR_ID_NS) {
+		struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+
+		ohci->flags |= OHCI_QUIRK_SUPERIO;
+		ohci_dbg (ohci, "Using NSC SuperIO setup\n");
+	}
+	pci_dev_put(b);
+
+	return 0;
+}
+
+/* Check for Compaq's ZFMicro chipset, which needs short
+ * delays before control or bulk queues get re-activated
+ * in finish_unlinks()
+ */
+static int ohci_quirk_zfmicro(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+
+	ohci->flags |= OHCI_QUIRK_ZFMICRO;
+	ohci_dbg(ohci, "enabled Compaq ZFMicro chipset quirks\n");
+
+	return 0;
+}
+
+/* Check for Toshiba SCC OHCI which has big endian registers
+ * and little endian in memory data structures
+ */
+static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+
+	/* That chip is only present in the southbridge of some
+	 * cell based platforms which are supposed to select
+	 * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO. We verify here if
+	 * that was the case though.
+	 */
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+	ohci->flags |= OHCI_QUIRK_BE_MMIO;
+	ohci_dbg (ohci, "enabled big endian Toshiba quirk\n");
+	return 0;
+#else
+	ohci_err (ohci, "unsupported big endian Toshiba quirk\n");
+	return -ENXIO;
+#endif
+}
+
+/* Check for NEC chip and apply quirk for allegedly lost interrupts.
+ */
+
+static void ohci_quirk_nec_worker(struct work_struct *work)
+{
+	struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
+	int status;
+
+	status = ohci_restart(ohci);
+	if (status != 0)
+		ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
+			 "ohci_restart", status);
+}
+
+static int ohci_quirk_nec(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+
+	ohci->flags |= OHCI_QUIRK_NEC;
+	INIT_WORK(&ohci->nec_work, ohci_quirk_nec_worker);
+	ohci_dbg (ohci, "enabled NEC chipset lost interrupt quirk\n");
+
+	return 0;
+}
+
+static int ohci_quirk_amd700(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+	if (usb_amd_quirk_pll_check())
+		ohci->flags |= OHCI_QUIRK_AMD_PLL;
+
+	/* SB800 needs pre-fetch fix */
+	if (usb_amd_prefetch_quirk()) {
+		ohci->flags |= OHCI_QUIRK_AMD_PREFETCH;
+		ohci_dbg(ohci, "enabled AMD prefetch quirk\n");
+	}
+
+	ohci->flags |= OHCI_QUIRK_GLOBAL_SUSPEND;
+	return 0;
+}
+
+static int ohci_quirk_qemu(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+	ohci->flags |= OHCI_QUIRK_QEMU;
+	ohci_dbg(ohci, "enabled qemu quirk\n");
+	return 0;
+}
+
+/* List of quirks for OHCI */
+static const struct pci_device_id ohci_pci_quirks[] = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c),
+		.driver_data = (unsigned long)ohci_quirk_amd756,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861),
+		.driver_data = (unsigned long)ohci_quirk_opti,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID),
+		.driver_data = (unsigned long)ohci_quirk_ns,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8),
+		.driver_data = (unsigned long)ohci_quirk_zfmicro,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, 0x01b6),
+		.driver_data = (unsigned long)ohci_quirk_toshiba_scc,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB),
+		.driver_data = (unsigned long)ohci_quirk_nec,
+	},
+	{
+		/* Toshiba portege 4000 */
+		.vendor		= PCI_VENDOR_ID_AL,
+		.device		= 0x5237,
+		.subvendor	= PCI_VENDOR_ID_TOSHIBA,
+		.subdevice	= 0x0004,
+		.driver_data	= (unsigned long) broken_suspend,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
+		.driver_data = (unsigned long) broken_suspend,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4397),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4398),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_APPLE,
+		.device		= 0x003f,
+		.subvendor	= PCI_SUBVENDOR_ID_REDHAT_QUMRANET,
+		.subdevice	= PCI_SUBDEVICE_ID_QEMU,
+		.driver_data	= (unsigned long)ohci_quirk_qemu,
+	},
+
+	{},
+};
+
+static int ohci_pci_reset (struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+	int ret = 0;
+
+	if (hcd->self.controller) {
+		const struct pci_device_id *quirk_id;
+
+		quirk_id = pci_match_id(ohci_pci_quirks, pdev);
+		if (quirk_id != NULL) {
+			int (*quirk)(struct usb_hcd *ohci);
+			quirk = (void *)quirk_id->driver_data;
+			ret = quirk(hcd);
+		}
+	}
+
+	if (ret == 0)
+		ret = ohci_setup(hcd);
+	/*
+	* After ohci setup RWC may not be set for add-in PCI cards.
+	* This transfers PCI PM wakeup capabilities.
+	*/
+	if (device_can_wakeup(&pdev->dev))
+		ohci->hc_control |= OHCI_CTRL_RWC;
+	return ret;
+}
+
+static struct hc_driver __read_mostly ohci_pci_hc_driver;
+
+static const struct ohci_driver_overrides pci_overrides __initconst = {
+	.product_desc =		"OHCI PCI host controller",
+	.reset =		ohci_pci_reset,
+};
+
+static const struct pci_device_id pci_ids[] = { {
+	/* handle any USB OHCI controller */
+	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
+	}, {
+	/* The device in the ConneXT I/O hub has no class reg */
+	PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI),
+	}, { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE (pci, pci_ids);
+
+static int ohci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	return usb_hcd_pci_probe(dev, &ohci_pci_hc_driver);
+}
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver ohci_pci_driver = {
+	.name =		hcd_name,
+	.id_table =	pci_ids,
+
+	.probe =	ohci_pci_probe,
+	.remove =	usb_hcd_pci_remove,
+	.shutdown =	usb_hcd_pci_shutdown,
+
+#ifdef CONFIG_PM
+	.driver =	{
+		.pm =	&usb_hcd_pci_pm_ops
+	},
+#endif
+};
+
+static int __init ohci_pci_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ohci_init_driver(&ohci_pci_hc_driver, &pci_overrides);
+
+#ifdef	CONFIG_PM
+	/* Entries for the PCI suspend/resume callbacks are special */
+	ohci_pci_hc_driver.pci_suspend = ohci_suspend;
+	ohci_pci_hc_driver.pci_resume = ohci_resume;
+#endif
+
+	return pci_register_driver(&ohci_pci_driver);
+}
+module_init(ohci_pci_init);
+
+static void __exit ohci_pci_cleanup(void)
+{
+	pci_unregister_driver(&ohci_pci_driver);
+}
+module_exit(ohci_pci_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_SOFTDEP("pre: ehci_pci");
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
new file mode 100644
index 000000000..a84305091
--- /dev/null
+++ b/drivers/usb/host/ohci-platform.c
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Generic platform ohci driver
+ *
+ * Copyright 2007 Michael Buesch <m@bues.ch>
+ * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Derived from the OCHI-SSB driver
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/of.h>
+
+#include "ohci.h"
+
+#define DRIVER_DESC "OHCI generic platform driver"
+#define OHCI_MAX_CLKS 3
+#define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv)
+
+struct ohci_platform_priv {
+	struct clk *clks[OHCI_MAX_CLKS];
+	struct reset_control *resets;
+};
+
+static int ohci_platform_power_on(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+	int clk, ret;
+
+	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) {
+		ret = clk_prepare_enable(priv->clks[clk]);
+		if (ret)
+			goto err_disable_clks;
+	}
+
+	return 0;
+
+err_disable_clks:
+	while (--clk >= 0)
+		clk_disable_unprepare(priv->clks[clk]);
+
+	return ret;
+}
+
+static void ohci_platform_power_off(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+	int clk;
+
+	for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--)
+		if (priv->clks[clk])
+			clk_disable_unprepare(priv->clks[clk]);
+}
+
+static struct hc_driver __read_mostly ohci_platform_hc_driver;
+
+static const struct ohci_driver_overrides platform_overrides __initconst = {
+	.product_desc =		"Generic Platform OHCI controller",
+	.extra_priv_size =	sizeof(struct ohci_platform_priv),
+};
+
+static struct usb_ohci_pdata ohci_platform_defaults = {
+	.power_on =		ohci_platform_power_on,
+	.power_suspend =	ohci_platform_power_off,
+	.power_off =		ohci_platform_power_off,
+};
+
+static int ohci_platform_probe(struct platform_device *dev)
+{
+	struct usb_hcd *hcd;
+	struct resource *res_mem;
+	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
+	struct ohci_platform_priv *priv;
+	struct ohci_hcd *ohci;
+	int err, irq, clk = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	/*
+	 * Use reasonable defaults so platforms don't have to provide these
+	 * with DT probing on ARM.
+	 */
+	if (!pdata)
+		pdata = &ohci_platform_defaults;
+
+	err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
+	if (err)
+		return err;
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0)
+		return irq;
+
+	hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
+			dev_name(&dev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	platform_set_drvdata(dev, hcd);
+	dev->dev.platform_data = pdata;
+	priv = hcd_to_ohci_priv(hcd);
+	ohci = hcd_to_ohci(hcd);
+
+	if (pdata == &ohci_platform_defaults && dev->dev.of_node) {
+		if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
+			ohci->flags |= OHCI_QUIRK_BE_MMIO;
+
+		if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
+			ohci->flags |= OHCI_QUIRK_BE_DESC;
+
+		if (of_property_read_bool(dev->dev.of_node, "big-endian"))
+			ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
+
+		if (of_property_read_bool(dev->dev.of_node, "no-big-frame-no"))
+			ohci->flags |= OHCI_QUIRK_FRAME_NO;
+
+		if (of_property_read_bool(dev->dev.of_node,
+					  "remote-wakeup-connected"))
+			ohci->hc_control = OHCI_CTRL_RWC;
+
+		of_property_read_u32(dev->dev.of_node, "num-ports",
+				     &ohci->num_ports);
+
+		for (clk = 0; clk < OHCI_MAX_CLKS; clk++) {
+			priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
+			if (IS_ERR(priv->clks[clk])) {
+				err = PTR_ERR(priv->clks[clk]);
+				if (err == -EPROBE_DEFER)
+					goto err_put_clks;
+				priv->clks[clk] = NULL;
+				break;
+			}
+		}
+
+		priv->resets = devm_reset_control_array_get_optional_shared(
+								&dev->dev);
+		if (IS_ERR(priv->resets)) {
+			err = PTR_ERR(priv->resets);
+			goto err_put_clks;
+		}
+
+		err = reset_control_deassert(priv->resets);
+		if (err)
+			goto err_put_clks;
+	}
+
+	if (pdata->big_endian_desc)
+		ohci->flags |= OHCI_QUIRK_BE_DESC;
+	if (pdata->big_endian_mmio)
+		ohci->flags |= OHCI_QUIRK_BE_MMIO;
+	if (pdata->no_big_frame_no)
+		ohci->flags |= OHCI_QUIRK_FRAME_NO;
+	if (pdata->num_ports)
+		ohci->num_ports = pdata->num_ports;
+
+#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+	if (ohci->flags & OHCI_QUIRK_BE_MMIO) {
+		dev_err(&dev->dev,
+			"Error: CONFIG_USB_OHCI_BIG_ENDIAN_MMIO not set\n");
+		err = -EINVAL;
+		goto err_reset;
+	}
+#endif
+#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
+	if (ohci->flags & OHCI_QUIRK_BE_DESC) {
+		dev_err(&dev->dev,
+			"Error: CONFIG_USB_OHCI_BIG_ENDIAN_DESC not set\n");
+		err = -EINVAL;
+		goto err_reset;
+	}
+#endif
+
+	pm_runtime_set_active(&dev->dev);
+	pm_runtime_enable(&dev->dev);
+	if (pdata->power_on) {
+		err = pdata->power_on(dev);
+		if (err < 0)
+			goto err_reset;
+	}
+
+	res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
+	if (IS_ERR(hcd->regs)) {
+		err = PTR_ERR(hcd->regs);
+		goto err_power;
+	}
+	hcd->rsrc_start = res_mem->start;
+	hcd->rsrc_len = resource_size(res_mem);
+
+	hcd->tpl_support = of_usb_host_tpl_support(dev->dev.of_node);
+
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (err)
+		goto err_power;
+
+	device_wakeup_enable(hcd->self.controller);
+
+	platform_set_drvdata(dev, hcd);
+
+	return err;
+
+err_power:
+	if (pdata->power_off)
+		pdata->power_off(dev);
+err_reset:
+	pm_runtime_disable(&dev->dev);
+	reset_control_assert(priv->resets);
+err_put_clks:
+	while (--clk >= 0)
+		clk_put(priv->clks[clk]);
+
+	if (pdata == &ohci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	usb_put_hcd(hcd);
+
+	return err;
+}
+
+static int ohci_platform_remove(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
+	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+	int clk;
+
+	pm_runtime_get_sync(&dev->dev);
+	usb_remove_hcd(hcd);
+
+	if (pdata->power_off)
+		pdata->power_off(dev);
+
+	reset_control_assert(priv->resets);
+
+	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++)
+		clk_put(priv->clks[clk]);
+
+	usb_put_hcd(hcd);
+
+	pm_runtime_put_sync(&dev->dev);
+	pm_runtime_disable(&dev->dev);
+
+	if (pdata == &ohci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ohci_platform_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct usb_ohci_pdata *pdata = dev->platform_data;
+	struct platform_device *pdev = to_platform_device(dev);
+	bool do_wakeup = device_may_wakeup(dev);
+	int ret;
+
+	ret = ohci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+
+	if (pdata->power_suspend)
+		pdata->power_suspend(pdev);
+
+	return ret;
+}
+
+static int ohci_platform_resume_common(struct device *dev, bool hibernated)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct usb_ohci_pdata *pdata = dev_get_platdata(dev);
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if (pdata->power_on) {
+		int err = pdata->power_on(pdev);
+		if (err < 0)
+			return err;
+	}
+
+	ohci_resume(hcd, hibernated);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static int ohci_platform_resume(struct device *dev)
+{
+	return ohci_platform_resume_common(dev, false);
+}
+
+static int ohci_platform_restore(struct device *dev)
+{
+	return ohci_platform_resume_common(dev, true);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct of_device_id ohci_platform_ids[] = {
+	{ .compatible = "generic-ohci", },
+	{ .compatible = "cavium,octeon-6335-ohci", },
+	{ .compatible = "ti,ohci-omap3", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ohci_platform_ids);
+
+static const struct platform_device_id ohci_platform_table[] = {
+	{ "ohci-platform", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, ohci_platform_table);
+
+#ifdef CONFIG_PM_SLEEP
+static const struct dev_pm_ops ohci_platform_pm_ops = {
+	.suspend = ohci_platform_suspend,
+	.resume = ohci_platform_resume,
+	.freeze = ohci_platform_suspend,
+	.thaw = ohci_platform_resume,
+	.poweroff = ohci_platform_suspend,
+	.restore = ohci_platform_restore,
+};
+#endif
+
+static struct platform_driver ohci_platform_driver = {
+	.id_table	= ohci_platform_table,
+	.probe		= ohci_platform_probe,
+	.remove		= ohci_platform_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "ohci-platform",
+#ifdef CONFIG_PM_SLEEP
+		.pm	= &ohci_platform_pm_ops,
+#endif
+		.of_match_table = ohci_platform_ids,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	}
+};
+
+static int __init ohci_platform_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ohci_init_driver(&ohci_platform_hc_driver, &platform_overrides);
+	return platform_driver_register(&ohci_platform_driver);
+}
+module_init(ohci_platform_init);
+
+static void __exit ohci_platform_cleanup(void)
+{
+	platform_driver_unregister(&ohci_platform_driver);
+}
+module_exit(ohci_platform_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Hauke Mehrtens");
+MODULE_AUTHOR("Alan Stern");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
new file mode 100644
index 000000000..591f675cc
--- /dev/null
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ * (C) Copyright 2006 Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Bus glue for OHCI HC on the of_platform bus
+ *
+ * Modified for of_platform bus from ohci-sa1111.c
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/signal.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+static int
+ohci_ppc_of_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	int		ret;
+
+	if ((ret = ohci_init(ohci)) < 0)
+		return ret;
+
+	if ((ret = ohci_run(ohci)) < 0) {
+		dev_err(hcd->self.controller, "can't start %s\n",
+			hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct hc_driver ohci_ppc_of_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"OF OHCI",
+	.hcd_priv_size =	sizeof(struct ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			ohci_irq,
+	.flags =		HCD_USB11 | HCD_DMA | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.start =		ohci_ppc_of_start,
+	.stop =			ohci_stop,
+	.shutdown = 		ohci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	ohci_hub_status_data,
+	.hub_control =		ohci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend =		ohci_bus_suspend,
+	.bus_resume =		ohci_bus_resume,
+#endif
+	.start_port_reset =	ohci_start_port_reset,
+};
+
+
+static int ohci_hcd_ppc_of_probe(struct platform_device *op)
+{
+	struct device_node *dn = op->dev.of_node;
+	struct usb_hcd *hcd;
+	struct ohci_hcd	*ohci;
+	struct resource res;
+	int irq;
+
+	int rv;
+	int is_bigendian;
+	struct device_node *np;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	is_bigendian =
+		of_device_is_compatible(dn, "ohci-bigendian") ||
+		of_device_is_compatible(dn, "ohci-be");
+
+	dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
+
+	rv = of_address_to_resource(dn, 0, &res);
+	if (rv)
+		return rv;
+
+	hcd = usb_create_hcd(&ohci_ppc_of_hc_driver, &op->dev, "PPC-OF USB");
+	if (!hcd)
+		return -ENOMEM;
+
+	hcd->rsrc_start = res.start;
+	hcd->rsrc_len = resource_size(&res);
+
+	hcd->regs = devm_ioremap_resource(&op->dev, &res);
+	if (IS_ERR(hcd->regs)) {
+		rv = PTR_ERR(hcd->regs);
+		goto err_rmr;
+	}
+
+	irq = irq_of_parse_and_map(dn, 0);
+	if (irq == NO_IRQ) {
+		dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n",
+			__FILE__);
+		rv = -EBUSY;
+		goto err_rmr;
+	}
+
+	ohci = hcd_to_ohci(hcd);
+	if (is_bigendian) {
+		ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
+		if (of_device_is_compatible(dn, "fsl,mpc5200-ohci"))
+			ohci->flags |= OHCI_QUIRK_FRAME_NO;
+		if (of_device_is_compatible(dn, "mpc5200-ohci"))
+			ohci->flags |= OHCI_QUIRK_FRAME_NO;
+	}
+
+	ohci_hcd_init(ohci);
+
+	rv = usb_add_hcd(hcd, irq, 0);
+	if (rv == 0) {
+		device_wakeup_enable(hcd->self.controller);
+		return 0;
+	}
+
+	/* by now, 440epx is known to show usb_23 erratum */
+	np = of_find_compatible_node(NULL, NULL, "ibm,usb-ehci-440epx");
+
+	/* Work around - At this point ohci_run has executed, the
+	* controller is running, everything, the root ports, etc., is
+	* set up.  If the ehci driver is loaded, put the ohci core in
+	* the suspended state.  The ehci driver will bring it out of
+	* suspended state when / if a non-high speed USB device is
+	* attached to the USB Host port.  If the ehci driver is not
+	* loaded, do nothing. request_mem_region is used to test if
+	* the ehci driver is loaded.
+	*/
+	if (np !=  NULL) {
+		if (!of_address_to_resource(np, 0, &res)) {
+			if (!request_mem_region(res.start, 0x4, hcd_name)) {
+				writel_be((readl_be(&ohci->regs->control) |
+					OHCI_USB_SUSPEND), &ohci->regs->control);
+					(void) readl_be(&ohci->regs->control);
+			} else
+				release_mem_region(res.start, 0x4);
+		} else
+			pr_debug("%s: cannot get ehci offset from fdt\n", __FILE__);
+		of_node_put(np);
+	}
+
+	irq_dispose_mapping(irq);
+err_rmr:
+ 	usb_put_hcd(hcd);
+
+	return rv;
+}
+
+static int ohci_hcd_ppc_of_remove(struct platform_device *op)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(op);
+
+	dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
+
+	usb_remove_hcd(hcd);
+
+	irq_dispose_mapping(hcd->irq);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+static const struct of_device_id ohci_hcd_ppc_of_match[] = {
+#ifdef CONFIG_USB_OHCI_HCD_PPC_OF_BE
+	{
+		.name = "usb",
+		.compatible = "ohci-bigendian",
+	},
+	{
+		.name = "usb",
+		.compatible = "ohci-be",
+	},
+#endif
+#ifdef CONFIG_USB_OHCI_HCD_PPC_OF_LE
+	{
+		.name = "usb",
+		.compatible = "ohci-littledian",
+	},
+	{
+		.name = "usb",
+		.compatible = "ohci-le",
+	},
+#endif
+	{},
+};
+MODULE_DEVICE_TABLE(of, ohci_hcd_ppc_of_match);
+
+#if	!defined(CONFIG_USB_OHCI_HCD_PPC_OF_BE) && \
+	!defined(CONFIG_USB_OHCI_HCD_PPC_OF_LE)
+#error "No endianness selected for ppc-of-ohci"
+#endif
+
+
+static struct platform_driver ohci_hcd_ppc_of_driver = {
+	.probe		= ohci_hcd_ppc_of_probe,
+	.remove		= ohci_hcd_ppc_of_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver = {
+		.name = "ppc-of-ohci",
+		.of_match_table = ohci_hcd_ppc_of_match,
+	},
+};
+
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
new file mode 100644
index 000000000..4f5af929c
--- /dev/null
+++ b/drivers/usb/host/ohci-ps3.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  PS3 OHCI Host Controller driver
+ *
+ *  Copyright (C) 2006 Sony Computer Entertainment Inc.
+ *  Copyright 2006 Sony Corp.
+ */
+
+#include <asm/firmware.h>
+#include <asm/ps3.h>
+
+static int ps3_ohci_hc_reset(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+	ohci->flags |= OHCI_QUIRK_BE_MMIO;
+	ohci_hcd_init(ohci);
+	return ohci_init(ohci);
+}
+
+static int ps3_ohci_hc_start(struct usb_hcd *hcd)
+{
+	int result;
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+	/* Handle root hub init quirk in spider south bridge. */
+	/* Also set PwrOn2PwrGood to 0x7f (254ms). */
+
+	ohci_writel(ohci, 0x7f000000 | RH_A_PSM | RH_A_OCPM,
+		&ohci->regs->roothub.a);
+	ohci_writel(ohci, 0x00060000, &ohci->regs->roothub.b);
+
+	result = ohci_run(ohci);
+
+	if (result < 0) {
+		dev_err(hcd->self.controller, "can't start %s\n",
+			hcd->self.bus_name);
+		ohci_stop(hcd);
+	}
+
+	return result;
+}
+
+static const struct hc_driver ps3_ohci_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "PS3 OHCI Host Controller",
+	.hcd_priv_size		= sizeof(struct ohci_hcd),
+	.irq			= ohci_irq,
+	.flags			= HCD_MEMORY | HCD_DMA | HCD_USB11,
+	.reset			= ps3_ohci_hc_reset,
+	.start			= ps3_ohci_hc_start,
+	.stop			= ohci_stop,
+	.shutdown		= ohci_shutdown,
+	.urb_enqueue		= ohci_urb_enqueue,
+	.urb_dequeue		= ohci_urb_dequeue,
+	.endpoint_disable	= ohci_endpoint_disable,
+	.get_frame_number	= ohci_get_frame,
+	.hub_status_data	= ohci_hub_status_data,
+	.hub_control		= ohci_hub_control,
+	.start_port_reset	= ohci_start_port_reset,
+#if defined(CONFIG_PM)
+	.bus_suspend 		= ohci_bus_suspend,
+	.bus_resume 		= ohci_bus_resume,
+#endif
+};
+
+static int ps3_ohci_probe(struct ps3_system_bus_device *dev)
+{
+	int result;
+	struct usb_hcd *hcd;
+	unsigned int virq;
+	static u64 dummy_mask;
+
+	if (usb_disabled()) {
+		result = -ENODEV;
+		goto fail_start;
+	}
+
+	result = ps3_open_hv_device(dev);
+
+	if (result) {
+		dev_dbg(&dev->core, "%s:%d: ps3_open_hv_device failed: %s\n",
+			__func__, __LINE__, ps3_result(result));
+		result = -EPERM;
+		goto fail_open;
+	}
+
+	result = ps3_dma_region_create(dev->d_region);
+
+	if (result) {
+		dev_dbg(&dev->core, "%s:%d: ps3_dma_region_create failed: "
+			"(%d)\n", __func__, __LINE__, result);
+		BUG_ON("check region type");
+		goto fail_dma_region;
+	}
+
+	result = ps3_mmio_region_create(dev->m_region);
+
+	if (result) {
+		dev_dbg(&dev->core, "%s:%d: ps3_map_mmio_region failed\n",
+			__func__, __LINE__);
+		result = -EPERM;
+		goto fail_mmio_region;
+	}
+
+	dev_dbg(&dev->core, "%s:%d: mmio mapped_addr %lxh\n", __func__,
+		__LINE__, dev->m_region->lpar_addr);
+
+	result = ps3_io_irq_setup(PS3_BINDING_CPU_ANY, dev->interrupt_id, &virq);
+
+	if (result) {
+		dev_dbg(&dev->core, "%s:%d: ps3_construct_io_irq(%d) failed.\n",
+			__func__, __LINE__, virq);
+		result = -EPERM;
+		goto fail_irq;
+	}
+
+	dummy_mask = DMA_BIT_MASK(32);
+	dev->core.dma_mask = &dummy_mask;
+	dma_set_coherent_mask(&dev->core, dummy_mask);
+
+	hcd = usb_create_hcd(&ps3_ohci_hc_driver, &dev->core, dev_name(&dev->core));
+
+	if (!hcd) {
+		dev_dbg(&dev->core, "%s:%d: usb_create_hcd failed\n", __func__,
+			__LINE__);
+		result = -ENOMEM;
+		goto fail_create_hcd;
+	}
+
+	hcd->rsrc_start = dev->m_region->lpar_addr;
+	hcd->rsrc_len = dev->m_region->len;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name))
+		dev_dbg(&dev->core, "%s:%d: request_mem_region failed\n",
+			__func__, __LINE__);
+
+	hcd->regs = ioremap(dev->m_region->lpar_addr, dev->m_region->len);
+
+	if (!hcd->regs) {
+		dev_dbg(&dev->core, "%s:%d: ioremap failed\n", __func__,
+			__LINE__);
+		result = -EPERM;
+		goto fail_ioremap;
+	}
+
+	dev_dbg(&dev->core, "%s:%d: hcd->rsrc_start %lxh\n", __func__, __LINE__,
+		(unsigned long)hcd->rsrc_start);
+	dev_dbg(&dev->core, "%s:%d: hcd->rsrc_len   %lxh\n", __func__, __LINE__,
+		(unsigned long)hcd->rsrc_len);
+	dev_dbg(&dev->core, "%s:%d: hcd->regs       %lxh\n", __func__, __LINE__,
+		(unsigned long)hcd->regs);
+	dev_dbg(&dev->core, "%s:%d: virq            %lu\n", __func__, __LINE__,
+		(unsigned long)virq);
+
+	ps3_system_bus_set_drvdata(dev, hcd);
+
+	result = usb_add_hcd(hcd, virq, 0);
+
+	if (result) {
+		dev_dbg(&dev->core, "%s:%d: usb_add_hcd failed (%d)\n",
+			__func__, __LINE__, result);
+		goto fail_add_hcd;
+	}
+
+	device_wakeup_enable(hcd->self.controller);
+	return result;
+
+fail_add_hcd:
+	iounmap(hcd->regs);
+fail_ioremap:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+fail_create_hcd:
+	ps3_io_irq_destroy(virq);
+fail_irq:
+	ps3_free_mmio_region(dev->m_region);
+fail_mmio_region:
+	ps3_dma_region_free(dev->d_region);
+fail_dma_region:
+	ps3_close_hv_device(dev);
+fail_open:
+fail_start:
+	return result;
+}
+
+static void ps3_ohci_remove(struct ps3_system_bus_device *dev)
+{
+	unsigned int tmp;
+	struct usb_hcd *hcd = ps3_system_bus_get_drvdata(dev);
+
+	BUG_ON(!hcd);
+
+	dev_dbg(&dev->core, "%s:%d: regs %p\n", __func__, __LINE__, hcd->regs);
+	dev_dbg(&dev->core, "%s:%d: irq %u\n", __func__, __LINE__, hcd->irq);
+
+	tmp = hcd->irq;
+
+	ohci_shutdown(hcd);
+	usb_remove_hcd(hcd);
+
+	ps3_system_bus_set_drvdata(dev, NULL);
+
+	BUG_ON(!hcd->regs);
+	iounmap(hcd->regs);
+
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+
+	ps3_io_irq_destroy(tmp);
+	ps3_free_mmio_region(dev->m_region);
+
+	ps3_dma_region_free(dev->d_region);
+	ps3_close_hv_device(dev);
+}
+
+static int __init ps3_ohci_driver_register(struct ps3_system_bus_driver *drv)
+{
+	return firmware_has_feature(FW_FEATURE_PS3_LV1)
+		? ps3_system_bus_driver_register(drv)
+		: 0;
+}
+
+static void ps3_ohci_driver_unregister(struct ps3_system_bus_driver *drv)
+{
+	if (firmware_has_feature(FW_FEATURE_PS3_LV1))
+		ps3_system_bus_driver_unregister(drv);
+}
+
+MODULE_ALIAS(PS3_MODULE_ALIAS_OHCI);
+
+static struct ps3_system_bus_driver ps3_ohci_driver = {
+	.core.name = "ps3-ohci-driver",
+	.core.owner = THIS_MODULE,
+	.match_id = PS3_MATCH_ID_OHCI,
+	.probe = ps3_ohci_probe,
+	.remove = ps3_ohci_remove,
+	.shutdown = ps3_ohci_remove,
+};
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
new file mode 100644
index 000000000..a1dad8745
--- /dev/null
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -0,0 +1,624 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ *
+ * Bus Glue for pxa27x
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Russell King et al.
+ *
+ * Modified for LH7A404 from ohci-sa1111.c
+ *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
+ *
+ * Modified for pxa27x from ohci-lh7a404.c
+ *  by Nick Bane <nick@cecomputing.co.uk> 26-8-2004
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/signal.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
+#include <linux/soc/pxa/cpu.h>
+
+#include "ohci.h"
+
+#define DRIVER_DESC "OHCI PXA27x/PXA3x driver"
+
+/*
+ * UHC: USB Host Controller (OHCI-like) register definitions
+ */
+#define UHCREV		(0x0000) /* UHC HCI Spec Revision */
+#define UHCHCON		(0x0004) /* UHC Host Control Register */
+#define UHCCOMS		(0x0008) /* UHC Command Status Register */
+#define UHCINTS		(0x000C) /* UHC Interrupt Status Register */
+#define UHCINTE		(0x0010) /* UHC Interrupt Enable */
+#define UHCINTD		(0x0014) /* UHC Interrupt Disable */
+#define UHCHCCA		(0x0018) /* UHC Host Controller Comm. Area */
+#define UHCPCED		(0x001C) /* UHC Period Current Endpt Descr */
+#define UHCCHED		(0x0020) /* UHC Control Head Endpt Descr */
+#define UHCCCED		(0x0024) /* UHC Control Current Endpt Descr */
+#define UHCBHED		(0x0028) /* UHC Bulk Head Endpt Descr */
+#define UHCBCED		(0x002C) /* UHC Bulk Current Endpt Descr */
+#define UHCDHEAD	(0x0030) /* UHC Done Head */
+#define UHCFMI		(0x0034) /* UHC Frame Interval */
+#define UHCFMR		(0x0038) /* UHC Frame Remaining */
+#define UHCFMN		(0x003C) /* UHC Frame Number */
+#define UHCPERS		(0x0040) /* UHC Periodic Start */
+#define UHCLS		(0x0044) /* UHC Low Speed Threshold */
+
+#define UHCRHDA		(0x0048) /* UHC Root Hub Descriptor A */
+#define UHCRHDA_NOCP	(1 << 12)	/* No over current protection */
+#define UHCRHDA_OCPM	(1 << 11)	/* Over Current Protection Mode */
+#define UHCRHDA_POTPGT(x) \
+			(((x) & 0xff) << 24) /* Power On To Power Good Time */
+
+#define UHCRHDB		(0x004C) /* UHC Root Hub Descriptor B */
+#define UHCRHS		(0x0050) /* UHC Root Hub Status */
+#define UHCRHPS1	(0x0054) /* UHC Root Hub Port 1 Status */
+#define UHCRHPS2	(0x0058) /* UHC Root Hub Port 2 Status */
+#define UHCRHPS3	(0x005C) /* UHC Root Hub Port 3 Status */
+
+#define UHCSTAT		(0x0060) /* UHC Status Register */
+#define UHCSTAT_UPS3	(1 << 16)	/* USB Power Sense Port3 */
+#define UHCSTAT_SBMAI	(1 << 15)	/* System Bus Master Abort Interrupt*/
+#define UHCSTAT_SBTAI	(1 << 14)	/* System Bus Target Abort Interrupt*/
+#define UHCSTAT_UPRI	(1 << 13)	/* USB Port Resume Interrupt */
+#define UHCSTAT_UPS2	(1 << 12)	/* USB Power Sense Port 2 */
+#define UHCSTAT_UPS1	(1 << 11)	/* USB Power Sense Port 1 */
+#define UHCSTAT_HTA	(1 << 10)	/* HCI Target Abort */
+#define UHCSTAT_HBA	(1 << 8)	/* HCI Buffer Active */
+#define UHCSTAT_RWUE	(1 << 7)	/* HCI Remote Wake Up Event */
+
+#define UHCHR           (0x0064) /* UHC Reset Register */
+#define UHCHR_SSEP3	(1 << 11)	/* Sleep Standby Enable for Port3 */
+#define UHCHR_SSEP2	(1 << 10)	/* Sleep Standby Enable for Port2 */
+#define UHCHR_SSEP1	(1 << 9)	/* Sleep Standby Enable for Port1 */
+#define UHCHR_PCPL	(1 << 7)	/* Power control polarity low */
+#define UHCHR_PSPL	(1 << 6)	/* Power sense polarity low */
+#define UHCHR_SSE	(1 << 5)	/* Sleep Standby Enable */
+#define UHCHR_UIT	(1 << 4)	/* USB Interrupt Test */
+#define UHCHR_SSDC	(1 << 3)	/* Simulation Scale Down Clock */
+#define UHCHR_CGR	(1 << 2)	/* Clock Generation Reset */
+#define UHCHR_FHR	(1 << 1)	/* Force Host Controller Reset */
+#define UHCHR_FSBIR	(1 << 0)	/* Force System Bus Iface Reset */
+
+#define UHCHIE          (0x0068) /* UHC Interrupt Enable Register*/
+#define UHCHIE_UPS3IE	(1 << 14)	/* Power Sense Port3 IntEn */
+#define UHCHIE_UPRIE	(1 << 13)	/* Port Resume IntEn */
+#define UHCHIE_UPS2IE	(1 << 12)	/* Power Sense Port2 IntEn */
+#define UHCHIE_UPS1IE	(1 << 11)	/* Power Sense Port1 IntEn */
+#define UHCHIE_TAIE	(1 << 10)	/* HCI Interface Transfer Abort
+					   Interrupt Enable*/
+#define UHCHIE_HBAIE	(1 << 8)	/* HCI Buffer Active IntEn */
+#define UHCHIE_RWIE	(1 << 7)	/* Remote Wake-up IntEn */
+
+#define UHCHIT          (0x006C) /* UHC Interrupt Test register */
+
+#define PXA_UHC_MAX_PORTNUM    3
+
+static struct hc_driver __read_mostly ohci_pxa27x_hc_driver;
+
+struct pxa27x_ohci {
+	struct clk	*clk;
+	void __iomem	*mmio_base;
+	struct regulator *vbus[3];
+	bool		vbus_enabled[3];
+};
+
+#define to_pxa27x_ohci(hcd)	(struct pxa27x_ohci *)(hcd_to_ohci(hcd)->priv)
+
+/*
+  PMM_NPS_MODE -- PMM Non-power switching mode
+      Ports are powered continuously.
+
+  PMM_GLOBAL_MODE -- PMM global switching mode
+      All ports are powered at the same time.
+
+  PMM_PERPORT_MODE -- PMM per port switching mode
+      Ports are powered individually.
+ */
+static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *pxa_ohci, int mode)
+{
+	uint32_t uhcrhda = __raw_readl(pxa_ohci->mmio_base + UHCRHDA);
+	uint32_t uhcrhdb = __raw_readl(pxa_ohci->mmio_base + UHCRHDB);
+
+	switch (mode) {
+	case PMM_NPS_MODE:
+		uhcrhda |= RH_A_NPS;
+		break;
+	case PMM_GLOBAL_MODE:
+		uhcrhda &= ~(RH_A_NPS | RH_A_PSM);
+		break;
+	case PMM_PERPORT_MODE:
+		uhcrhda &= ~(RH_A_NPS);
+		uhcrhda |= RH_A_PSM;
+
+		/* Set port power control mask bits, only 3 ports. */
+		uhcrhdb |= (0x7<<17);
+		break;
+	default:
+		printk( KERN_ERR
+			"Invalid mode %d, set to non-power switch mode.\n",
+			mode );
+
+		uhcrhda |= RH_A_NPS;
+	}
+
+	__raw_writel(uhcrhda, pxa_ohci->mmio_base + UHCRHDA);
+	__raw_writel(uhcrhdb, pxa_ohci->mmio_base + UHCRHDB);
+	return 0;
+}
+
+static int pxa27x_ohci_set_vbus_power(struct pxa27x_ohci *pxa_ohci,
+				      unsigned int port, bool enable)
+{
+	struct regulator *vbus = pxa_ohci->vbus[port];
+	int ret = 0;
+
+	if (IS_ERR_OR_NULL(vbus))
+		return 0;
+
+	if (enable && !pxa_ohci->vbus_enabled[port])
+		ret = regulator_enable(vbus);
+	else if (!enable && pxa_ohci->vbus_enabled[port])
+		ret = regulator_disable(vbus);
+
+	if (ret < 0)
+		return ret;
+
+	pxa_ohci->vbus_enabled[port] = enable;
+
+	return 0;
+}
+
+static int pxa27x_ohci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+				   u16 wIndex, char *buf, u16 wLength)
+{
+	struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd);
+	int ret;
+
+	switch (typeReq) {
+	case SetPortFeature:
+	case ClearPortFeature:
+		if (!wIndex || wIndex > 3)
+			return -EPIPE;
+
+		if (wValue != USB_PORT_FEAT_POWER)
+			break;
+
+		ret = pxa27x_ohci_set_vbus_power(pxa_ohci, wIndex - 1,
+						 typeReq == SetPortFeature);
+		if (ret)
+			return ret;
+		break;
+	}
+
+	return ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+}
+/*-------------------------------------------------------------------------*/
+
+static inline void pxa27x_setup_hc(struct pxa27x_ohci *pxa_ohci,
+				   struct pxaohci_platform_data *inf)
+{
+	uint32_t uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR);
+	uint32_t uhcrhda = __raw_readl(pxa_ohci->mmio_base + UHCRHDA);
+
+	if (inf->flags & ENABLE_PORT1)
+		uhchr &= ~UHCHR_SSEP1;
+
+	if (inf->flags & ENABLE_PORT2)
+		uhchr &= ~UHCHR_SSEP2;
+
+	if (inf->flags & ENABLE_PORT3)
+		uhchr &= ~UHCHR_SSEP3;
+
+	if (inf->flags & POWER_CONTROL_LOW)
+		uhchr |= UHCHR_PCPL;
+
+	if (inf->flags & POWER_SENSE_LOW)
+		uhchr |= UHCHR_PSPL;
+
+	if (inf->flags & NO_OC_PROTECTION)
+		uhcrhda |= UHCRHDA_NOCP;
+	else
+		uhcrhda &= ~UHCRHDA_NOCP;
+
+	if (inf->flags & OC_MODE_PERPORT)
+		uhcrhda |= UHCRHDA_OCPM;
+	else
+		uhcrhda &= ~UHCRHDA_OCPM;
+
+	if (inf->power_on_delay) {
+		uhcrhda &= ~UHCRHDA_POTPGT(0xff);
+		uhcrhda |= UHCRHDA_POTPGT(inf->power_on_delay / 2);
+	}
+
+	__raw_writel(uhchr, pxa_ohci->mmio_base + UHCHR);
+	__raw_writel(uhcrhda, pxa_ohci->mmio_base + UHCRHDA);
+}
+
+static inline void pxa27x_reset_hc(struct pxa27x_ohci *pxa_ohci)
+{
+	uint32_t uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR);
+
+	__raw_writel(uhchr | UHCHR_FHR, pxa_ohci->mmio_base + UHCHR);
+	udelay(11);
+	__raw_writel(uhchr & ~UHCHR_FHR, pxa_ohci->mmio_base + UHCHR);
+}
+
+#ifdef CONFIG_PXA27x
+extern void pxa27x_clear_otgph(void);
+#else
+#define pxa27x_clear_otgph()	do {} while (0)
+#endif
+
+static int pxa27x_start_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev)
+{
+	int retval;
+	struct pxaohci_platform_data *inf;
+	uint32_t uhchr;
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	inf = dev_get_platdata(dev);
+
+	retval = clk_prepare_enable(pxa_ohci->clk);
+	if (retval)
+		return retval;
+
+	pxa27x_reset_hc(pxa_ohci);
+
+	uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR) | UHCHR_FSBIR;
+	__raw_writel(uhchr, pxa_ohci->mmio_base + UHCHR);
+
+	while (__raw_readl(pxa_ohci->mmio_base + UHCHR) & UHCHR_FSBIR)
+		cpu_relax();
+
+	pxa27x_setup_hc(pxa_ohci, inf);
+
+	if (inf->init)
+		retval = inf->init(dev);
+
+	if (retval < 0) {
+		clk_disable_unprepare(pxa_ohci->clk);
+		return retval;
+	}
+
+	if (cpu_is_pxa3xx())
+		pxa3xx_u2d_start_hc(&hcd->self);
+
+	uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR) & ~UHCHR_SSE;
+	__raw_writel(uhchr, pxa_ohci->mmio_base + UHCHR);
+	__raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, pxa_ohci->mmio_base + UHCHIE);
+
+	/* Clear any OTG Pin Hold */
+	pxa27x_clear_otgph();
+	return 0;
+}
+
+static void pxa27x_stop_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev)
+{
+	struct pxaohci_platform_data *inf;
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	uint32_t uhccoms;
+
+	inf = dev_get_platdata(dev);
+
+	if (cpu_is_pxa3xx())
+		pxa3xx_u2d_stop_hc(&hcd->self);
+
+	if (inf->exit)
+		inf->exit(dev);
+
+	pxa27x_reset_hc(pxa_ohci);
+
+	/* Host Controller Reset */
+	uhccoms = __raw_readl(pxa_ohci->mmio_base + UHCCOMS) | 0x01;
+	__raw_writel(uhccoms, pxa_ohci->mmio_base + UHCCOMS);
+	udelay(10);
+
+	clk_disable_unprepare(pxa_ohci->clk);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id pxa_ohci_dt_ids[] = {
+	{ .compatible = "marvell,pxa-ohci" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, pxa_ohci_dt_ids);
+
+static int ohci_pxa_of_init(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct pxaohci_platform_data *pdata;
+	u32 tmp;
+	int ret;
+
+	if (!np)
+		return 0;
+
+	/* Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	if (of_property_read_bool(np, "marvell,enable-port1"))
+		pdata->flags |= ENABLE_PORT1;
+	if (of_property_read_bool(np, "marvell,enable-port2"))
+		pdata->flags |= ENABLE_PORT2;
+	if (of_property_read_bool(np, "marvell,enable-port3"))
+		pdata->flags |= ENABLE_PORT3;
+	if (of_property_read_bool(np, "marvell,port-sense-low"))
+		pdata->flags |= POWER_SENSE_LOW;
+	if (of_property_read_bool(np, "marvell,power-control-low"))
+		pdata->flags |= POWER_CONTROL_LOW;
+	if (of_property_read_bool(np, "marvell,no-oc-protection"))
+		pdata->flags |= NO_OC_PROTECTION;
+	if (of_property_read_bool(np, "marvell,oc-mode-perport"))
+		pdata->flags |= OC_MODE_PERPORT;
+	if (!of_property_read_u32(np, "marvell,power-on-delay", &tmp))
+		pdata->power_on_delay = tmp;
+	if (!of_property_read_u32(np, "marvell,port-mode", &tmp))
+		pdata->port_mode = tmp;
+	if (!of_property_read_u32(np, "marvell,power-budget", &tmp))
+		pdata->power_budget = tmp;
+
+	pdev->dev.platform_data = pdata;
+
+	return 0;
+}
+#else
+static int ohci_pxa_of_init(struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
+
+
+/**
+ * ohci_hcd_pxa27x_probe - initialize pxa27x-based HCDs
+ * @pdev:	USB Host controller to probe
+ *
+ * Context: task context, might sleep
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ */
+static int ohci_hcd_pxa27x_probe(struct platform_device *pdev)
+{
+	int retval, irq;
+	struct usb_hcd *hcd;
+	struct pxaohci_platform_data *inf;
+	struct pxa27x_ohci *pxa_ohci;
+	struct ohci_hcd *ohci;
+	struct resource *r;
+	struct clk *usb_clk;
+	unsigned int i;
+
+	retval = ohci_pxa_of_init(pdev);
+	if (retval)
+		return retval;
+
+	inf = dev_get_platdata(&pdev->dev);
+
+	if (!inf)
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		pr_err("no resource of IORESOURCE_IRQ");
+		return irq;
+	}
+
+	usb_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(usb_clk))
+		return PTR_ERR(usb_clk);
+
+	hcd = usb_create_hcd(&ohci_pxa27x_hc_driver, &pdev->dev, "pxa27x");
+	if (!hcd)
+		return -ENOMEM;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(hcd->regs)) {
+		retval = PTR_ERR(hcd->regs);
+		goto err;
+	}
+	hcd->rsrc_start = r->start;
+	hcd->rsrc_len = resource_size(r);
+
+	/* initialize "struct pxa27x_ohci" */
+	pxa_ohci = to_pxa27x_ohci(hcd);
+	pxa_ohci->clk = usb_clk;
+	pxa_ohci->mmio_base = (void __iomem *)hcd->regs;
+
+	for (i = 0; i < 3; ++i) {
+		char name[6];
+
+		if (!(inf->flags & (ENABLE_PORT1 << i)))
+			continue;
+
+		sprintf(name, "vbus%u", i + 1);
+		pxa_ohci->vbus[i] = devm_regulator_get(&pdev->dev, name);
+	}
+
+	retval = pxa27x_start_hc(pxa_ohci, &pdev->dev);
+	if (retval < 0) {
+		pr_debug("pxa27x_start_hc failed");
+		goto err;
+	}
+
+	/* Select Power Management Mode */
+	pxa27x_ohci_select_pmm(pxa_ohci, inf->port_mode);
+
+	if (inf->power_budget)
+		hcd->power_budget = inf->power_budget;
+
+	/* The value of NDP in roothub_a is incorrect on this hardware */
+	ohci = hcd_to_ohci(hcd);
+	ohci->num_ports = 3;
+
+	retval = usb_add_hcd(hcd, irq, 0);
+	if (retval == 0) {
+		device_wakeup_enable(hcd->self.controller);
+		return retval;
+	}
+
+	pxa27x_stop_hc(pxa_ohci, &pdev->dev);
+ err:
+	usb_put_hcd(hcd);
+	return retval;
+}
+
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+/**
+ * ohci_hcd_pxa27x_remove - shutdown processing for pxa27x-based HCDs
+ * @pdev: USB Host Controller being removed
+ *
+ * Context: task context, might sleep
+ *
+ * Reverses the effect of ohci_hcd_pxa27x_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ */
+static int ohci_hcd_pxa27x_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd);
+	unsigned int i;
+
+	usb_remove_hcd(hcd);
+	pxa27x_stop_hc(pxa_ohci, &pdev->dev);
+
+	for (i = 0; i < 3; ++i)
+		pxa27x_ohci_set_vbus_power(pxa_ohci, i, false);
+
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+static int ohci_hcd_pxa27x_drv_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	bool do_wakeup = device_may_wakeup(dev);
+	int ret;
+
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ret = ohci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+
+	pxa27x_stop_hc(pxa_ohci, dev);
+	return ret;
+}
+
+static int ohci_hcd_pxa27x_drv_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd);
+	struct pxaohci_platform_data *inf = dev_get_platdata(dev);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	int status;
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	status = pxa27x_start_hc(pxa_ohci, dev);
+	if (status < 0)
+		return status;
+
+	/* Select Power Management Mode */
+	pxa27x_ohci_select_pmm(pxa_ohci, inf->port_mode);
+
+	ohci_resume(hcd, false);
+	return 0;
+}
+
+static const struct dev_pm_ops ohci_hcd_pxa27x_pm_ops = {
+	.suspend	= ohci_hcd_pxa27x_drv_suspend,
+	.resume		= ohci_hcd_pxa27x_drv_resume,
+};
+#endif
+
+static struct platform_driver ohci_hcd_pxa27x_driver = {
+	.probe		= ohci_hcd_pxa27x_probe,
+	.remove		= ohci_hcd_pxa27x_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "pxa27x-ohci",
+		.of_match_table = of_match_ptr(pxa_ohci_dt_ids),
+#ifdef CONFIG_PM
+		.pm	= &ohci_hcd_pxa27x_pm_ops,
+#endif
+	},
+};
+
+static const struct ohci_driver_overrides pxa27x_overrides __initconst = {
+	.extra_priv_size =      sizeof(struct pxa27x_ohci),
+};
+
+static int __init ohci_pxa27x_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ohci_init_driver(&ohci_pxa27x_hc_driver, &pxa27x_overrides);
+	ohci_pxa27x_hc_driver.hub_control = pxa27x_ohci_hub_control;
+
+	return platform_driver_register(&ohci_hcd_pxa27x_driver);
+}
+module_init(ohci_pxa27x_init);
+
+static void __exit ohci_pxa27x_cleanup(void)
+{
+	platform_driver_unregister(&ohci_hcd_pxa27x_driver);
+}
+module_exit(ohci_pxa27x_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa27x-ohci");
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
new file mode 100644
index 000000000..3b445312b
--- /dev/null
+++ b/drivers/usb/host/ohci-q.c
@@ -0,0 +1,1235 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/irq.h>
+#include <linux/slab.h>
+
+static void urb_free_priv (struct ohci_hcd *hc, urb_priv_t *urb_priv)
+{
+	int		last = urb_priv->length - 1;
+
+	if (last >= 0) {
+		int		i;
+		struct td	*td;
+
+		for (i = 0; i <= last; i++) {
+			td = urb_priv->td [i];
+			if (td)
+				td_free (hc, td);
+		}
+	}
+
+	list_del (&urb_priv->pending);
+	kfree (urb_priv);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * URB goes back to driver, and isn't reissued.
+ * It's completely gone from HC data structures.
+ * PRECONDITION:  ohci lock held, irqs blocked.
+ */
+static void
+finish_urb(struct ohci_hcd *ohci, struct urb *urb, int status)
+__releases(ohci->lock)
+__acquires(ohci->lock)
+{
+	struct device *dev = ohci_to_hcd(ohci)->self.controller;
+	struct usb_host_endpoint *ep = urb->ep;
+	struct urb_priv *urb_priv;
+
+	// ASSERT (urb->hcpriv != 0);
+
+ restart:
+	urb_free_priv (ohci, urb->hcpriv);
+	urb->hcpriv = NULL;
+	if (likely(status == -EINPROGRESS))
+		status = 0;
+
+	switch (usb_pipetype (urb->pipe)) {
+	case PIPE_ISOCHRONOUS:
+		ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs--;
+		if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) {
+			if (quirk_amdiso(ohci))
+				usb_amd_quirk_pll_enable();
+			if (quirk_amdprefetch(ohci))
+				sb800_prefetch(dev, 0);
+		}
+		break;
+	case PIPE_INTERRUPT:
+		ohci_to_hcd(ohci)->self.bandwidth_int_reqs--;
+		break;
+	}
+
+	/* urb->complete() can reenter this HCD */
+	usb_hcd_unlink_urb_from_ep(ohci_to_hcd(ohci), urb);
+	spin_unlock (&ohci->lock);
+	usb_hcd_giveback_urb(ohci_to_hcd(ohci), urb, status);
+	spin_lock (&ohci->lock);
+
+	/* stop periodic dma if it's not needed */
+	if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0
+			&& ohci_to_hcd(ohci)->self.bandwidth_int_reqs == 0) {
+		ohci->hc_control &= ~(OHCI_CTRL_PLE|OHCI_CTRL_IE);
+		ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+	}
+
+	/*
+	 * An isochronous URB that is sumitted too late won't have any TDs
+	 * (marked by the fact that the td_cnt value is larger than the
+	 * actual number of TDs).  If the next URB on this endpoint is like
+	 * that, give it back now.
+	 */
+	if (!list_empty(&ep->urb_list)) {
+		urb = list_first_entry(&ep->urb_list, struct urb, urb_list);
+		urb_priv = urb->hcpriv;
+		if (urb_priv->td_cnt > urb_priv->length) {
+			status = 0;
+			goto restart;
+		}
+	}
+}
+
+
+/*-------------------------------------------------------------------------*
+ * ED handling functions
+ *-------------------------------------------------------------------------*/
+
+/* search for the right schedule branch to use for a periodic ed.
+ * does some load balancing; returns the branch, or negative errno.
+ */
+static int balance (struct ohci_hcd *ohci, int interval, int load)
+{
+	int	i, branch = -ENOSPC;
+
+	/* iso periods can be huge; iso tds specify frame numbers */
+	if (interval > NUM_INTS)
+		interval = NUM_INTS;
+
+	/* search for the least loaded schedule branch of that period
+	 * that has enough bandwidth left unreserved.
+	 */
+	for (i = 0; i < interval ; i++) {
+		if (branch < 0 || ohci->load [branch] > ohci->load [i]) {
+			int	j;
+
+			/* usb 1.1 says 90% of one frame */
+			for (j = i; j < NUM_INTS; j += interval) {
+				if ((ohci->load [j] + load) > 900)
+					break;
+			}
+			if (j < NUM_INTS)
+				continue;
+			branch = i;
+		}
+	}
+	return branch;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* both iso and interrupt requests have periods; this routine puts them
+ * into the schedule tree in the apppropriate place.  most iso devices use
+ * 1msec periods, but that's not required.
+ */
+static void periodic_link (struct ohci_hcd *ohci, struct ed *ed)
+{
+	unsigned	i;
+
+	ohci_dbg(ohci, "link %sed %p branch %d [%dus.], interval %d\n",
+		(ed->hwINFO & cpu_to_hc32 (ohci, ED_ISO)) ? "iso " : "",
+		ed, ed->branch, ed->load, ed->interval);
+
+	for (i = ed->branch; i < NUM_INTS; i += ed->interval) {
+		struct ed	**prev = &ohci->periodic [i];
+		__hc32		*prev_p = &ohci->hcca->int_table [i];
+		struct ed	*here = *prev;
+
+		/* sorting each branch by period (slow before fast)
+		 * lets us share the faster parts of the tree.
+		 * (plus maybe: put interrupt eds before iso)
+		 */
+		while (here && ed != here) {
+			if (ed->interval > here->interval)
+				break;
+			prev = &here->ed_next;
+			prev_p = &here->hwNextED;
+			here = *prev;
+		}
+		if (ed != here) {
+			ed->ed_next = here;
+			if (here)
+				ed->hwNextED = *prev_p;
+			wmb ();
+			*prev = ed;
+			*prev_p = cpu_to_hc32(ohci, ed->dma);
+			wmb();
+		}
+		ohci->load [i] += ed->load;
+	}
+	ohci_to_hcd(ohci)->self.bandwidth_allocated += ed->load / ed->interval;
+}
+
+/* link an ed into one of the HC chains */
+
+static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed)
+{
+	int	branch;
+
+	ed->ed_prev = NULL;
+	ed->ed_next = NULL;
+	ed->hwNextED = 0;
+	wmb ();
+
+	/* we care about rm_list when setting CLE/BLE in case the HC was at
+	 * work on some TD when CLE/BLE was turned off, and isn't quiesced
+	 * yet.  finish_unlinks() restarts as needed, some upcoming INTR_SF.
+	 *
+	 * control and bulk EDs are doubly linked (ed_next, ed_prev), but
+	 * periodic ones are singly linked (ed_next). that's because the
+	 * periodic schedule encodes a tree like figure 3-5 in the ohci
+	 * spec:  each qh can have several "previous" nodes, and the tree
+	 * doesn't have unused/idle descriptors.
+	 */
+	switch (ed->type) {
+	case PIPE_CONTROL:
+		if (ohci->ed_controltail == NULL) {
+			WARN_ON (ohci->hc_control & OHCI_CTRL_CLE);
+			ohci_writel (ohci, ed->dma,
+					&ohci->regs->ed_controlhead);
+		} else {
+			ohci->ed_controltail->ed_next = ed;
+			ohci->ed_controltail->hwNextED = cpu_to_hc32 (ohci,
+								ed->dma);
+		}
+		ed->ed_prev = ohci->ed_controltail;
+		if (!ohci->ed_controltail && !ohci->ed_rm_list) {
+			wmb();
+			ohci->hc_control |= OHCI_CTRL_CLE;
+			ohci_writel (ohci, 0, &ohci->regs->ed_controlcurrent);
+			ohci_writel (ohci, ohci->hc_control,
+					&ohci->regs->control);
+		}
+		ohci->ed_controltail = ed;
+		break;
+
+	case PIPE_BULK:
+		if (ohci->ed_bulktail == NULL) {
+			WARN_ON (ohci->hc_control & OHCI_CTRL_BLE);
+			ohci_writel (ohci, ed->dma, &ohci->regs->ed_bulkhead);
+		} else {
+			ohci->ed_bulktail->ed_next = ed;
+			ohci->ed_bulktail->hwNextED = cpu_to_hc32 (ohci,
+								ed->dma);
+		}
+		ed->ed_prev = ohci->ed_bulktail;
+		if (!ohci->ed_bulktail && !ohci->ed_rm_list) {
+			wmb();
+			ohci->hc_control |= OHCI_CTRL_BLE;
+			ohci_writel (ohci, 0, &ohci->regs->ed_bulkcurrent);
+			ohci_writel (ohci, ohci->hc_control,
+					&ohci->regs->control);
+		}
+		ohci->ed_bulktail = ed;
+		break;
+
+	// case PIPE_INTERRUPT:
+	// case PIPE_ISOCHRONOUS:
+	default:
+		branch = balance (ohci, ed->interval, ed->load);
+		if (branch < 0) {
+			ohci_dbg (ohci,
+				"ERR %d, interval %d msecs, load %d\n",
+				branch, ed->interval, ed->load);
+			// FIXME if there are TDs queued, fail them!
+			return branch;
+		}
+		ed->branch = branch;
+		periodic_link (ohci, ed);
+	}
+
+	/* the HC may not see the schedule updates yet, but if it does
+	 * then they'll be properly ordered.
+	 */
+
+	ed->state = ED_OPER;
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* scan the periodic table to find and unlink this ED */
+static void periodic_unlink (struct ohci_hcd *ohci, struct ed *ed)
+{
+	int	i;
+
+	for (i = ed->branch; i < NUM_INTS; i += ed->interval) {
+		struct ed	*temp;
+		struct ed	**prev = &ohci->periodic [i];
+		__hc32		*prev_p = &ohci->hcca->int_table [i];
+
+		while (*prev && (temp = *prev) != ed) {
+			prev_p = &temp->hwNextED;
+			prev = &temp->ed_next;
+		}
+		if (*prev) {
+			*prev_p = ed->hwNextED;
+			*prev = ed->ed_next;
+		}
+		ohci->load [i] -= ed->load;
+	}
+	ohci_to_hcd(ohci)->self.bandwidth_allocated -= ed->load / ed->interval;
+
+	ohci_dbg(ohci, "unlink %sed %p branch %d [%dus.], interval %d\n",
+		(ed->hwINFO & cpu_to_hc32 (ohci, ED_ISO)) ? "iso " : "",
+		ed, ed->branch, ed->load, ed->interval);
+}
+
+/* unlink an ed from one of the HC chains.
+ * just the link to the ed is unlinked.
+ * the link from the ed still points to another operational ed or 0
+ * so the HC can eventually finish the processing of the unlinked ed
+ * (assuming it already started that, which needn't be true).
+ *
+ * ED_UNLINK is a transient state: the HC may still see this ED, but soon
+ * it won't.  ED_SKIP means the HC will finish its current transaction,
+ * but won't start anything new.  The TD queue may still grow; device
+ * drivers don't know about this HCD-internal state.
+ *
+ * When the HC can't see the ED, something changes ED_UNLINK to one of:
+ *
+ *  - ED_OPER: when there's any request queued, the ED gets rescheduled
+ *    immediately.  HC should be working on them.
+ *
+ *  - ED_IDLE: when there's no TD queue or the HC isn't running.
+ *
+ * When finish_unlinks() runs later, after SOF interrupt, it will often
+ * complete one or more URB unlinks before making that state change.
+ */
+static void ed_deschedule (struct ohci_hcd *ohci, struct ed *ed)
+{
+	ed->hwINFO |= cpu_to_hc32 (ohci, ED_SKIP);
+	wmb ();
+	ed->state = ED_UNLINK;
+
+	/* To deschedule something from the control or bulk list, just
+	 * clear CLE/BLE and wait.  There's no safe way to scrub out list
+	 * head/current registers until later, and "later" isn't very
+	 * tightly specified.  Figure 6-5 and Section 6.4.2.2 show how
+	 * the HC is reading the ED queues (while we modify them).
+	 *
+	 * For now, ed_schedule() is "later".  It might be good paranoia
+	 * to scrub those registers in finish_unlinks(), in case of bugs
+	 * that make the HC try to use them.
+	 */
+	switch (ed->type) {
+	case PIPE_CONTROL:
+		/* remove ED from the HC's list: */
+		if (ed->ed_prev == NULL) {
+			if (!ed->hwNextED) {
+				ohci->hc_control &= ~OHCI_CTRL_CLE;
+				ohci_writel (ohci, ohci->hc_control,
+						&ohci->regs->control);
+				// a ohci_readl() later syncs CLE with the HC
+			} else
+				ohci_writel (ohci,
+					hc32_to_cpup (ohci, &ed->hwNextED),
+					&ohci->regs->ed_controlhead);
+		} else {
+			ed->ed_prev->ed_next = ed->ed_next;
+			ed->ed_prev->hwNextED = ed->hwNextED;
+		}
+		/* remove ED from the HCD's list: */
+		if (ohci->ed_controltail == ed) {
+			ohci->ed_controltail = ed->ed_prev;
+			if (ohci->ed_controltail)
+				ohci->ed_controltail->ed_next = NULL;
+		} else if (ed->ed_next) {
+			ed->ed_next->ed_prev = ed->ed_prev;
+		}
+		break;
+
+	case PIPE_BULK:
+		/* remove ED from the HC's list: */
+		if (ed->ed_prev == NULL) {
+			if (!ed->hwNextED) {
+				ohci->hc_control &= ~OHCI_CTRL_BLE;
+				ohci_writel (ohci, ohci->hc_control,
+						&ohci->regs->control);
+				// a ohci_readl() later syncs BLE with the HC
+			} else
+				ohci_writel (ohci,
+					hc32_to_cpup (ohci, &ed->hwNextED),
+					&ohci->regs->ed_bulkhead);
+		} else {
+			ed->ed_prev->ed_next = ed->ed_next;
+			ed->ed_prev->hwNextED = ed->hwNextED;
+		}
+		/* remove ED from the HCD's list: */
+		if (ohci->ed_bulktail == ed) {
+			ohci->ed_bulktail = ed->ed_prev;
+			if (ohci->ed_bulktail)
+				ohci->ed_bulktail->ed_next = NULL;
+		} else if (ed->ed_next) {
+			ed->ed_next->ed_prev = ed->ed_prev;
+		}
+		break;
+
+	// case PIPE_INTERRUPT:
+	// case PIPE_ISOCHRONOUS:
+	default:
+		periodic_unlink (ohci, ed);
+		break;
+	}
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* get and maybe (re)init an endpoint. init _should_ be done only as part
+ * of enumeration, usb_set_configuration() or usb_set_interface().
+ */
+static struct ed *ed_get (
+	struct ohci_hcd		*ohci,
+	struct usb_host_endpoint *ep,
+	struct usb_device	*udev,
+	unsigned int		pipe,
+	int			interval
+) {
+	struct ed		*ed;
+	unsigned long		flags;
+
+	spin_lock_irqsave (&ohci->lock, flags);
+
+	ed = ep->hcpriv;
+	if (!ed) {
+		struct td	*td;
+		int		is_out;
+		u32		info;
+
+		ed = ed_alloc (ohci, GFP_ATOMIC);
+		if (!ed) {
+			/* out of memory */
+			goto done;
+		}
+
+		/* dummy td; end of td list for ed */
+		td = td_alloc (ohci, GFP_ATOMIC);
+		if (!td) {
+			/* out of memory */
+			ed_free (ohci, ed);
+			ed = NULL;
+			goto done;
+		}
+		ed->dummy = td;
+		ed->hwTailP = cpu_to_hc32 (ohci, td->td_dma);
+		ed->hwHeadP = ed->hwTailP;	/* ED_C, ED_H zeroed */
+		ed->state = ED_IDLE;
+
+		is_out = !(ep->desc.bEndpointAddress & USB_DIR_IN);
+
+		/* FIXME usbcore changes dev->devnum before SET_ADDRESS
+		 * succeeds ... otherwise we wouldn't need "pipe".
+		 */
+		info = usb_pipedevice (pipe);
+		ed->type = usb_pipetype(pipe);
+
+		info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << 7;
+		info |= usb_endpoint_maxp(&ep->desc) << 16;
+		if (udev->speed == USB_SPEED_LOW)
+			info |= ED_LOWSPEED;
+		/* only control transfers store pids in tds */
+		if (ed->type != PIPE_CONTROL) {
+			info |= is_out ? ED_OUT : ED_IN;
+			if (ed->type != PIPE_BULK) {
+				/* periodic transfers... */
+				if (ed->type == PIPE_ISOCHRONOUS)
+					info |= ED_ISO;
+				else if (interval > 32)	/* iso can be bigger */
+					interval = 32;
+				ed->interval = interval;
+				ed->load = usb_calc_bus_time (
+					udev->speed, !is_out,
+					ed->type == PIPE_ISOCHRONOUS,
+					usb_endpoint_maxp(&ep->desc))
+						/ 1000;
+			}
+		}
+		ed->hwINFO = cpu_to_hc32(ohci, info);
+
+		ep->hcpriv = ed;
+	}
+
+done:
+	spin_unlock_irqrestore (&ohci->lock, flags);
+	return ed;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* request unlinking of an endpoint from an operational HC.
+ * put the ep on the rm_list
+ * real work is done at the next start frame (SF) hardware interrupt
+ * caller guarantees HCD is running, so hardware access is safe,
+ * and that ed->state is ED_OPER
+ */
+static void start_ed_unlink (struct ohci_hcd *ohci, struct ed *ed)
+{
+	ed->hwINFO |= cpu_to_hc32 (ohci, ED_DEQUEUE);
+	ed_deschedule (ohci, ed);
+
+	/* rm_list is just singly linked, for simplicity */
+	ed->ed_next = ohci->ed_rm_list;
+	ed->ed_prev = NULL;
+	ohci->ed_rm_list = ed;
+
+	/* enable SOF interrupt */
+	ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrstatus);
+	ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable);
+	// flush those writes, and get latest HCCA contents
+	(void) ohci_readl (ohci, &ohci->regs->control);
+
+	/* SF interrupt might get delayed; record the frame counter value that
+	 * indicates when the HC isn't looking at it, so concurrent unlinks
+	 * behave.  frame_no wraps every 2^16 msec, and changes right before
+	 * SF is triggered.
+	 */
+	ed->tick = ohci_frame_no(ohci) + 1;
+
+}
+
+/*-------------------------------------------------------------------------*
+ * TD handling functions
+ *-------------------------------------------------------------------------*/
+
+/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
+
+static void
+td_fill (struct ohci_hcd *ohci, u32 info,
+	dma_addr_t data, int len,
+	struct urb *urb, int index)
+{
+	struct td		*td, *td_pt;
+	struct urb_priv		*urb_priv = urb->hcpriv;
+	int			is_iso = info & TD_ISO;
+	int			hash;
+
+	// ASSERT (index < urb_priv->length);
+
+	/* aim for only one interrupt per urb.  mostly applies to control
+	 * and iso; other urbs rarely need more than one TD per urb.
+	 * this way, only final tds (or ones with an error) cause IRQs.
+	 * at least immediately; use DI=6 in case any control request is
+	 * tempted to die part way through.  (and to force the hc to flush
+	 * its donelist soonish, even on unlink paths.)
+	 *
+	 * NOTE: could delay interrupts even for the last TD, and get fewer
+	 * interrupts ... increasing per-urb latency by sharing interrupts.
+	 * Drivers that queue bulk urbs may request that behavior.
+	 */
+	if (index != (urb_priv->length - 1)
+			|| (urb->transfer_flags & URB_NO_INTERRUPT))
+		info |= TD_DI_SET (6);
+
+	/* use this td as the next dummy */
+	td_pt = urb_priv->td [index];
+
+	/* fill the old dummy TD */
+	td = urb_priv->td [index] = urb_priv->ed->dummy;
+	urb_priv->ed->dummy = td_pt;
+
+	td->ed = urb_priv->ed;
+	td->next_dl_td = NULL;
+	td->index = index;
+	td->urb = urb;
+	td->data_dma = data;
+	if (!len)
+		data = 0;
+
+	td->hwINFO = cpu_to_hc32 (ohci, info);
+	if (is_iso) {
+		td->hwCBP = cpu_to_hc32 (ohci, data & 0xFFFFF000);
+		*ohci_hwPSWp(ohci, td, 0) = cpu_to_hc16 (ohci,
+						(data & 0x0FFF) | 0xE000);
+	} else {
+		td->hwCBP = cpu_to_hc32 (ohci, data);
+	}
+	if (data)
+		td->hwBE = cpu_to_hc32 (ohci, data + len - 1);
+	else
+		td->hwBE = 0;
+	td->hwNextTD = cpu_to_hc32 (ohci, td_pt->td_dma);
+
+	/* append to queue */
+	list_add_tail (&td->td_list, &td->ed->td_list);
+
+	/* hash it for later reverse mapping */
+	hash = TD_HASH_FUNC (td->td_dma);
+	td->td_hash = ohci->td_hash [hash];
+	ohci->td_hash [hash] = td;
+
+	/* HC might read the TD (or cachelines) right away ... */
+	wmb ();
+	td->ed->hwTailP = td->hwNextTD;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Prepare all TDs of a transfer, and queue them onto the ED.
+ * Caller guarantees HC is active.
+ * Usually the ED is already on the schedule, so TDs might be
+ * processed as soon as they're queued.
+ */
+static void td_submit_urb (
+	struct ohci_hcd	*ohci,
+	struct urb	*urb
+) {
+	struct urb_priv	*urb_priv = urb->hcpriv;
+	struct device *dev = ohci_to_hcd(ohci)->self.controller;
+	dma_addr_t	data;
+	int		data_len = urb->transfer_buffer_length;
+	int		cnt = 0;
+	u32		info = 0;
+	int		is_out = usb_pipeout (urb->pipe);
+	int		periodic = 0;
+	int		i, this_sg_len, n;
+	struct scatterlist	*sg;
+
+	/* OHCI handles the bulk/interrupt data toggles itself.  We just
+	 * use the device toggle bits for resetting, and rely on the fact
+	 * that resetting toggle is meaningless if the endpoint is active.
+	 */
+	if (!usb_gettoggle (urb->dev, usb_pipeendpoint (urb->pipe), is_out)) {
+		usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe),
+			is_out, 1);
+		urb_priv->ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_C);
+	}
+
+	list_add (&urb_priv->pending, &ohci->pending);
+
+	i = urb->num_mapped_sgs;
+	if (data_len > 0 && i > 0) {
+		sg = urb->sg;
+		data = sg_dma_address(sg);
+
+		/*
+		 * urb->transfer_buffer_length may be smaller than the
+		 * size of the scatterlist (or vice versa)
+		 */
+		this_sg_len = min_t(int, sg_dma_len(sg), data_len);
+	} else {
+		sg = NULL;
+		if (data_len)
+			data = urb->transfer_dma;
+		else
+			data = 0;
+		this_sg_len = data_len;
+	}
+
+	/* NOTE:  TD_CC is set so we can tell which TDs the HC processed by
+	 * using TD_CC_GET, as well as by seeing them on the done list.
+	 * (CC = NotAccessed ... 0x0F, or 0x0E in PSWs for ISO.)
+	 */
+	switch (urb_priv->ed->type) {
+
+	/* Bulk and interrupt are identical except for where in the schedule
+	 * their EDs live.
+	 */
+	case PIPE_INTERRUPT:
+		/* ... and periodic urbs have extra accounting */
+		periodic = ohci_to_hcd(ohci)->self.bandwidth_int_reqs++ == 0
+			&& ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0;
+		fallthrough;
+	case PIPE_BULK:
+		info = is_out
+			? TD_T_TOGGLE | TD_CC | TD_DP_OUT
+			: TD_T_TOGGLE | TD_CC | TD_DP_IN;
+		/* TDs _could_ transfer up to 8K each */
+		for (;;) {
+			n = min(this_sg_len, 4096);
+
+			/* maybe avoid ED halt on final TD short read */
+			if (n >= data_len || (i == 1 && n >= this_sg_len)) {
+				if (!(urb->transfer_flags & URB_SHORT_NOT_OK))
+					info |= TD_R;
+			}
+			td_fill(ohci, info, data, n, urb, cnt);
+			this_sg_len -= n;
+			data_len -= n;
+			data += n;
+			cnt++;
+
+			if (this_sg_len <= 0) {
+				if (--i <= 0 || data_len <= 0)
+					break;
+				sg = sg_next(sg);
+				data = sg_dma_address(sg);
+				this_sg_len = min_t(int, sg_dma_len(sg),
+						data_len);
+			}
+		}
+		if ((urb->transfer_flags & URB_ZERO_PACKET)
+				&& cnt < urb_priv->length) {
+			td_fill (ohci, info, 0, 0, urb, cnt);
+			cnt++;
+		}
+		/* maybe kickstart bulk list */
+		if (urb_priv->ed->type == PIPE_BULK) {
+			wmb ();
+			ohci_writel (ohci, OHCI_BLF, &ohci->regs->cmdstatus);
+		}
+		break;
+
+	/* control manages DATA0/DATA1 toggle per-request; SETUP resets it,
+	 * any DATA phase works normally, and the STATUS ack is special.
+	 */
+	case PIPE_CONTROL:
+		info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
+		td_fill (ohci, info, urb->setup_dma, 8, urb, cnt++);
+		if (data_len > 0) {
+			info = TD_CC | TD_R | TD_T_DATA1;
+			info |= is_out ? TD_DP_OUT : TD_DP_IN;
+			/* NOTE:  mishandles transfers >8K, some >4K */
+			td_fill (ohci, info, data, data_len, urb, cnt++);
+		}
+		info = (is_out || data_len == 0)
+			? TD_CC | TD_DP_IN | TD_T_DATA1
+			: TD_CC | TD_DP_OUT | TD_T_DATA1;
+		td_fill (ohci, info, data, 0, urb, cnt++);
+		/* maybe kickstart control list */
+		wmb ();
+		ohci_writel (ohci, OHCI_CLF, &ohci->regs->cmdstatus);
+		break;
+
+	/* ISO has no retransmit, so no toggle; and it uses special TDs.
+	 * Each TD could handle multiple consecutive frames (interval 1);
+	 * we could often reduce the number of TDs here.
+	 */
+	case PIPE_ISOCHRONOUS:
+		for (cnt = urb_priv->td_cnt; cnt < urb->number_of_packets;
+				cnt++) {
+			int	frame = urb->start_frame;
+
+			// FIXME scheduling should handle frame counter
+			// roll-around ... exotic case (and OHCI has
+			// a 2^16 iso range, vs other HCs max of 2^10)
+			frame += cnt * urb->interval;
+			frame &= 0xffff;
+			td_fill (ohci, TD_CC | TD_ISO | frame,
+				data + urb->iso_frame_desc [cnt].offset,
+				urb->iso_frame_desc [cnt].length, urb, cnt);
+		}
+		if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) {
+			if (quirk_amdiso(ohci))
+				usb_amd_quirk_pll_disable();
+			if (quirk_amdprefetch(ohci))
+				sb800_prefetch(dev, 1);
+		}
+		periodic = ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs++ == 0
+			&& ohci_to_hcd(ohci)->self.bandwidth_int_reqs == 0;
+		break;
+	}
+
+	/* start periodic dma if needed */
+	if (periodic) {
+		wmb ();
+		ohci->hc_control |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
+		ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+	}
+
+	// ASSERT (urb_priv->length == cnt);
+}
+
+/*-------------------------------------------------------------------------*
+ * Done List handling functions
+ *-------------------------------------------------------------------------*/
+
+/* calculate transfer length/status and update the urb */
+static int td_done(struct ohci_hcd *ohci, struct urb *urb, struct td *td)
+{
+	u32	tdINFO = hc32_to_cpup (ohci, &td->hwINFO);
+	int	cc = 0;
+	int	status = -EINPROGRESS;
+
+	list_del (&td->td_list);
+
+	/* ISO ... drivers see per-TD length/status */
+	if (tdINFO & TD_ISO) {
+		u16	tdPSW = ohci_hwPSW(ohci, td, 0);
+		int	dlen = 0;
+
+		/* NOTE:  assumes FC in tdINFO == 0, and that
+		 * only the first of 0..MAXPSW psws is used.
+		 */
+
+		cc = (tdPSW >> 12) & 0xF;
+		if (tdINFO & TD_CC)	/* hc didn't touch? */
+			return status;
+
+		if (usb_pipeout (urb->pipe))
+			dlen = urb->iso_frame_desc [td->index].length;
+		else {
+			/* short reads are always OK for ISO */
+			if (cc == TD_DATAUNDERRUN)
+				cc = TD_CC_NOERROR;
+			dlen = tdPSW & 0x3ff;
+		}
+		urb->actual_length += dlen;
+		urb->iso_frame_desc [td->index].actual_length = dlen;
+		urb->iso_frame_desc [td->index].status = cc_to_error [cc];
+
+		if (cc != TD_CC_NOERROR)
+			ohci_dbg(ohci,
+				"urb %p iso td %p (%d) len %d cc %d\n",
+				urb, td, 1 + td->index, dlen, cc);
+
+	/* BULK, INT, CONTROL ... drivers see aggregate length/status,
+	 * except that "setup" bytes aren't counted and "short" transfers
+	 * might not be reported as errors.
+	 */
+	} else {
+		int	type = usb_pipetype (urb->pipe);
+		u32	tdBE = hc32_to_cpup (ohci, &td->hwBE);
+
+		cc = TD_CC_GET (tdINFO);
+
+		/* update packet status if needed (short is normally ok) */
+		if (cc == TD_DATAUNDERRUN
+				&& !(urb->transfer_flags & URB_SHORT_NOT_OK))
+			cc = TD_CC_NOERROR;
+		if (cc != TD_CC_NOERROR && cc < 0x0E)
+			status = cc_to_error[cc];
+
+		/* count all non-empty packets except control SETUP packet */
+		if ((type != PIPE_CONTROL || td->index != 0) && tdBE != 0) {
+			if (td->hwCBP == 0)
+				urb->actual_length += tdBE - td->data_dma + 1;
+			else
+				urb->actual_length +=
+					  hc32_to_cpup (ohci, &td->hwCBP)
+					- td->data_dma;
+		}
+
+		if (cc != TD_CC_NOERROR && cc < 0x0E)
+			ohci_dbg(ohci,
+				"urb %p td %p (%d) cc %d, len=%d/%d\n",
+				urb, td, 1 + td->index, cc,
+				urb->actual_length,
+				urb->transfer_buffer_length);
+	}
+	return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void ed_halted(struct ohci_hcd *ohci, struct td *td, int cc)
+{
+	struct urb		*urb = td->urb;
+	urb_priv_t		*urb_priv = urb->hcpriv;
+	struct ed		*ed = td->ed;
+	struct list_head	*tmp = td->td_list.next;
+	__hc32			toggle = ed->hwHeadP & cpu_to_hc32 (ohci, ED_C);
+
+	/* clear ed halt; this is the td that caused it, but keep it inactive
+	 * until its urb->complete() has a chance to clean up.
+	 */
+	ed->hwINFO |= cpu_to_hc32 (ohci, ED_SKIP);
+	wmb ();
+	ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_H);
+
+	/* Get rid of all later tds from this urb.  We don't have
+	 * to be careful: no errors and nothing was transferred.
+	 * Also patch the ed so it looks as if those tds completed normally.
+	 */
+	while (tmp != &ed->td_list) {
+		struct td	*next;
+
+		next = list_entry (tmp, struct td, td_list);
+		tmp = next->td_list.next;
+
+		if (next->urb != urb)
+			break;
+
+		/* NOTE: if multi-td control DATA segments get supported,
+		 * this urb had one of them, this td wasn't the last td
+		 * in that segment (TD_R clear), this ed halted because
+		 * of a short read, _and_ URB_SHORT_NOT_OK is clear ...
+		 * then we need to leave the control STATUS packet queued
+		 * and clear ED_SKIP.
+		 */
+
+		list_del(&next->td_list);
+		urb_priv->td_cnt++;
+		ed->hwHeadP = next->hwNextTD | toggle;
+	}
+
+	/* help for troubleshooting:  report anything that
+	 * looks odd ... that doesn't include protocol stalls
+	 * (or maybe some other things)
+	 */
+	switch (cc) {
+	case TD_DATAUNDERRUN:
+		if ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0)
+			break;
+		fallthrough;
+	case TD_CC_STALL:
+		if (usb_pipecontrol (urb->pipe))
+			break;
+		fallthrough;
+	default:
+		ohci_dbg (ohci,
+			"urb %p path %s ep%d%s %08x cc %d --> status %d\n",
+			urb, urb->dev->devpath,
+			usb_pipeendpoint (urb->pipe),
+			usb_pipein (urb->pipe) ? "in" : "out",
+			hc32_to_cpu (ohci, td->hwINFO),
+			cc, cc_to_error [cc]);
+	}
+}
+
+/* Add a TD to the done list */
+static void add_to_done_list(struct ohci_hcd *ohci, struct td *td)
+{
+	struct td	*td2, *td_prev;
+	struct ed	*ed;
+
+	if (td->next_dl_td)
+		return;		/* Already on the list */
+
+	/* Add all the TDs going back until we reach one that's on the list */
+	ed = td->ed;
+	td2 = td_prev = td;
+	list_for_each_entry_continue_reverse(td2, &ed->td_list, td_list) {
+		if (td2->next_dl_td)
+			break;
+		td2->next_dl_td = td_prev;
+		td_prev = td2;
+	}
+
+	if (ohci->dl_end)
+		ohci->dl_end->next_dl_td = td_prev;
+	else
+		ohci->dl_start = td_prev;
+
+	/*
+	 * Make td->next_dl_td point to td itself, to mark the fact
+	 * that td is on the done list.
+	 */
+	ohci->dl_end = td->next_dl_td = td;
+
+	/* Did we just add the latest pending TD? */
+	td2 = ed->pending_td;
+	if (td2 && td2->next_dl_td)
+		ed->pending_td = NULL;
+}
+
+/* Get the entries on the hardware done queue and put them on our list */
+static void update_done_list(struct ohci_hcd *ohci)
+{
+	u32		td_dma;
+	struct td	*td = NULL;
+
+	td_dma = hc32_to_cpup (ohci, &ohci->hcca->done_head);
+	ohci->hcca->done_head = 0;
+	wmb();
+
+	/* get TD from hc's singly linked list, and
+	 * add to ours.  ed->td_list changes later.
+	 */
+	while (td_dma) {
+		int		cc;
+
+		td = dma_to_td (ohci, td_dma);
+		if (!td) {
+			ohci_err (ohci, "bad entry %8x\n", td_dma);
+			break;
+		}
+
+		td->hwINFO |= cpu_to_hc32 (ohci, TD_DONE);
+		cc = TD_CC_GET (hc32_to_cpup (ohci, &td->hwINFO));
+
+		/* Non-iso endpoints can halt on error; un-halt,
+		 * and dequeue any other TDs from this urb.
+		 * No other TD could have caused the halt.
+		 */
+		if (cc != TD_CC_NOERROR
+				&& (td->ed->hwHeadP & cpu_to_hc32 (ohci, ED_H)))
+			ed_halted(ohci, td, cc);
+
+		td_dma = hc32_to_cpup (ohci, &td->hwNextTD);
+		add_to_done_list(ohci, td);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* there are some urbs/eds to unlink; called in_irq(), with HCD locked */
+static void finish_unlinks(struct ohci_hcd *ohci)
+{
+	unsigned	tick = ohci_frame_no(ohci);
+	struct ed	*ed, **last;
+
+rescan_all:
+	for (last = &ohci->ed_rm_list, ed = *last; ed != NULL; ed = *last) {
+		struct list_head	*entry, *tmp;
+		int			completed, modified;
+		__hc32			*prev;
+
+		/* only take off EDs that the HC isn't using, accounting for
+		 * frame counter wraps and EDs with partially retired TDs
+		 */
+		if (likely(ohci->rh_state == OHCI_RH_RUNNING) &&
+				tick_before(tick, ed->tick)) {
+skip_ed:
+			last = &ed->ed_next;
+			continue;
+		}
+		if (!list_empty(&ed->td_list)) {
+			struct td	*td;
+			u32		head;
+
+			td = list_first_entry(&ed->td_list, struct td, td_list);
+
+			/* INTR_WDH may need to clean up first */
+			head = hc32_to_cpu(ohci, ed->hwHeadP) & TD_MASK;
+			if (td->td_dma != head &&
+					ohci->rh_state == OHCI_RH_RUNNING)
+				goto skip_ed;
+
+			/* Don't mess up anything already on the done list */
+			if (td->next_dl_td)
+				goto skip_ed;
+		}
+
+		/* ED's now officially unlinked, hc doesn't see */
+		ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_H);
+		ed->hwNextED = 0;
+		wmb();
+		ed->hwINFO &= ~cpu_to_hc32(ohci, ED_SKIP | ED_DEQUEUE);
+
+		/* reentrancy:  if we drop the schedule lock, someone might
+		 * have modified this list.  normally it's just prepending
+		 * entries (which we'd ignore), but paranoia won't hurt.
+		 */
+		*last = ed->ed_next;
+		ed->ed_next = NULL;
+		modified = 0;
+
+		/* unlink urbs as requested, but rescan the list after
+		 * we call a completion since it might have unlinked
+		 * another (earlier) urb
+		 *
+		 * When we get here, the HC doesn't see this ed.  But it
+		 * must not be rescheduled until all completed URBs have
+		 * been given back to the driver.
+		 */
+rescan_this:
+		completed = 0;
+		prev = &ed->hwHeadP;
+		list_for_each_safe (entry, tmp, &ed->td_list) {
+			struct td	*td;
+			struct urb	*urb;
+			urb_priv_t	*urb_priv;
+			__hc32		savebits;
+			u32		tdINFO;
+
+			td = list_entry (entry, struct td, td_list);
+			urb = td->urb;
+			urb_priv = td->urb->hcpriv;
+
+			if (!urb->unlinked) {
+				prev = &td->hwNextTD;
+				continue;
+			}
+
+			/* patch pointer hc uses */
+			savebits = *prev & ~cpu_to_hc32 (ohci, TD_MASK);
+			*prev = td->hwNextTD | savebits;
+
+			/* If this was unlinked, the TD may not have been
+			 * retired ... so manually save the data toggle.
+			 * The controller ignores the value we save for
+			 * control and ISO endpoints.
+			 */
+			tdINFO = hc32_to_cpup(ohci, &td->hwINFO);
+			if ((tdINFO & TD_T) == TD_T_DATA0)
+				ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_C);
+			else if ((tdINFO & TD_T) == TD_T_DATA1)
+				ed->hwHeadP |= cpu_to_hc32(ohci, ED_C);
+
+			/* HC may have partly processed this TD */
+			td_done (ohci, urb, td);
+			urb_priv->td_cnt++;
+
+			/* if URB is done, clean up */
+			if (urb_priv->td_cnt >= urb_priv->length) {
+				modified = completed = 1;
+				finish_urb(ohci, urb, 0);
+			}
+		}
+		if (completed && !list_empty (&ed->td_list))
+			goto rescan_this;
+
+		/*
+		 * If no TDs are queued, ED is now idle.
+		 * Otherwise, if the HC is running, reschedule.
+		 * If the HC isn't running, add ED back to the
+		 * start of the list for later processing.
+		 */
+		if (list_empty(&ed->td_list)) {
+			ed->state = ED_IDLE;
+			list_del(&ed->in_use_list);
+		} else if (ohci->rh_state == OHCI_RH_RUNNING) {
+			ed_schedule(ohci, ed);
+		} else {
+			ed->ed_next = ohci->ed_rm_list;
+			ohci->ed_rm_list = ed;
+			/* Don't loop on the same ED */
+			if (last == &ohci->ed_rm_list)
+				last = &ed->ed_next;
+		}
+
+		if (modified)
+			goto rescan_all;
+	}
+
+	/* maybe reenable control and bulk lists */
+	if (ohci->rh_state == OHCI_RH_RUNNING && !ohci->ed_rm_list) {
+		u32	command = 0, control = 0;
+
+		if (ohci->ed_controltail) {
+			command |= OHCI_CLF;
+			if (quirk_zfmicro(ohci))
+				mdelay(1);
+			if (!(ohci->hc_control & OHCI_CTRL_CLE)) {
+				control |= OHCI_CTRL_CLE;
+				ohci_writel (ohci, 0,
+					&ohci->regs->ed_controlcurrent);
+			}
+		}
+		if (ohci->ed_bulktail) {
+			command |= OHCI_BLF;
+			if (quirk_zfmicro(ohci))
+				mdelay(1);
+			if (!(ohci->hc_control & OHCI_CTRL_BLE)) {
+				control |= OHCI_CTRL_BLE;
+				ohci_writel (ohci, 0,
+					&ohci->regs->ed_bulkcurrent);
+			}
+		}
+
+		/* CLE/BLE to enable, CLF/BLF to (maybe) kickstart */
+		if (control) {
+			ohci->hc_control |= control;
+			if (quirk_zfmicro(ohci))
+				mdelay(1);
+			ohci_writel (ohci, ohci->hc_control,
+					&ohci->regs->control);
+		}
+		if (command) {
+			if (quirk_zfmicro(ohci))
+				mdelay(1);
+			ohci_writel (ohci, command, &ohci->regs->cmdstatus);
+		}
+	}
+}
+
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Take back a TD from the host controller */
+static void takeback_td(struct ohci_hcd *ohci, struct td *td)
+{
+	struct urb	*urb = td->urb;
+	urb_priv_t	*urb_priv = urb->hcpriv;
+	struct ed	*ed = td->ed;
+	int		status;
+
+	/* update URB's length and status from TD */
+	status = td_done(ohci, urb, td);
+	urb_priv->td_cnt++;
+
+	/* If all this urb's TDs are done, call complete() */
+	if (urb_priv->td_cnt >= urb_priv->length)
+		finish_urb(ohci, urb, status);
+
+	/* clean schedule:  unlink EDs that are no longer busy */
+	if (list_empty(&ed->td_list)) {
+		if (ed->state == ED_OPER)
+			start_ed_unlink(ohci, ed);
+
+	/* ... reenabling halted EDs only after fault cleanup */
+	} else if ((ed->hwINFO & cpu_to_hc32(ohci, ED_SKIP | ED_DEQUEUE))
+			== cpu_to_hc32(ohci, ED_SKIP)) {
+		td = list_entry(ed->td_list.next, struct td, td_list);
+		if (!(td->hwINFO & cpu_to_hc32(ohci, TD_DONE))) {
+			ed->hwINFO &= ~cpu_to_hc32(ohci, ED_SKIP);
+			/* ... hc may need waking-up */
+			switch (ed->type) {
+			case PIPE_CONTROL:
+				ohci_writel(ohci, OHCI_CLF,
+						&ohci->regs->cmdstatus);
+				break;
+			case PIPE_BULK:
+				ohci_writel(ohci, OHCI_BLF,
+						&ohci->regs->cmdstatus);
+				break;
+			}
+		}
+	}
+}
+
+/*
+ * Process normal completions (error or success) and clean the schedules.
+ *
+ * This is the main path for handing urbs back to drivers.  The only other
+ * normal path is finish_unlinks(), which unlinks URBs using ed_rm_list,
+ * instead of scanning the (re-reversed) donelist as this does.
+ */
+static void process_done_list(struct ohci_hcd *ohci)
+{
+	struct td	*td;
+
+	while (ohci->dl_start) {
+		td = ohci->dl_start;
+		if (td == ohci->dl_end)
+			ohci->dl_start = ohci->dl_end = NULL;
+		else
+			ohci->dl_start = td->next_dl_td;
+
+		takeback_td(ohci, td);
+	}
+}
+
+/*
+ * TD takeback and URB giveback must be single-threaded.
+ * This routine takes care of it all.
+ */
+static void ohci_work(struct ohci_hcd *ohci)
+{
+	if (ohci->working) {
+		ohci->restart_work = 1;
+		return;
+	}
+	ohci->working = 1;
+
+ restart:
+	process_done_list(ohci);
+	if (ohci->ed_rm_list)
+		finish_unlinks(ohci);
+
+	if (ohci->restart_work) {
+		ohci->restart_work = 0;
+		goto restart;
+	}
+	ohci->working = 0;
+}
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
new file mode 100644
index 000000000..85a0a9ae0
--- /dev/null
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -0,0 +1,501 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ *
+ * USB Bus Glue for Samsung S3C2410
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Russell King et al.
+ *
+ * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c
+ *	by Ben Dooks, <ben@simtec.co.uk>
+ *	Copyright (C) 2004 Simtec Electronics
+ *
+ * Thanks to basprog@mail.ru for updates to newer kernels
+ *
+ * This file is licenced under the GPL.
+*/
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+
+
+#define valid_port(idx) ((idx) == 1 || (idx) == 2)
+
+/* clock device associated with the hcd */
+
+
+#define DRIVER_DESC "OHCI S3C2410 driver"
+
+static struct clk *clk;
+static struct clk *usb_clk;
+
+static struct hc_driver __read_mostly ohci_s3c2410_hc_driver;
+
+/* forward definitions */
+
+static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
+
+/* conversion functions */
+
+static struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
+{
+	return dev_get_platdata(hcd->self.controller);
+}
+
+static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
+{
+	struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev);
+
+	dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
+
+	clk_prepare_enable(usb_clk);
+	mdelay(2);			/* let the bus clock stabilise */
+
+	clk_prepare_enable(clk);
+
+	if (info != NULL) {
+		info->hcd	= hcd;
+		info->report_oc = s3c2410_hcd_oc;
+
+		if (info->enable_oc != NULL)
+			(info->enable_oc)(info, 1);
+	}
+}
+
+static void s3c2410_stop_hc(struct platform_device *dev)
+{
+	struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev);
+
+	dev_dbg(&dev->dev, "s3c2410_stop_hc:\n");
+
+	if (info != NULL) {
+		info->report_oc = NULL;
+		info->hcd	= NULL;
+
+		if (info->enable_oc != NULL)
+			(info->enable_oc)(info, 0);
+	}
+
+	clk_disable_unprepare(clk);
+	clk_disable_unprepare(usb_clk);
+}
+
+/* ohci_s3c2410_hub_status_data
+ *
+ * update the status data from the hub with anything that
+ * has been detected by our system
+*/
+
+static int
+ohci_s3c2410_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
+	struct s3c2410_hcd_port *port;
+	int orig;
+	int portno;
+
+	orig = ohci_hub_status_data(hcd, buf);
+
+	if (info == NULL)
+		return orig;
+
+	port = &info->port[0];
+
+	/* mark any changed port as changed */
+
+	for (portno = 0; portno < 2; port++, portno++) {
+		if (port->oc_changed == 1 &&
+		    port->flags & S3C_HCDFLG_USED) {
+			dev_dbg(hcd->self.controller,
+				"oc change on port %d\n", portno);
+
+			if (orig < 1)
+				orig = 1;
+
+			buf[0] |= 1<<(portno+1);
+		}
+	}
+
+	return orig;
+}
+
+/* s3c2410_usb_set_power
+ *
+ * configure the power on a port, by calling the platform device
+ * routine registered with the platform device
+*/
+
+static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info,
+				  int port, int to)
+{
+	if (info == NULL)
+		return;
+
+	if (info->power_control != NULL) {
+		info->port[port-1].power = to;
+		(info->power_control)(port-1, to);
+	}
+}
+
+/* ohci_s3c2410_hub_control
+ *
+ * look at control requests to the hub, and see if we need
+ * to take any action or over-ride the results from the
+ * request.
+*/
+
+static int ohci_s3c2410_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength)
+{
+	struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
+	struct usb_hub_descriptor *desc;
+	int ret = -EINVAL;
+	u32 *data = (u32 *)buf;
+
+	dev_dbg(hcd->self.controller,
+		"s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
+		hcd, typeReq, wValue, wIndex, buf, wLength);
+
+	/* if we are only an humble host without any special capabilities
+	 * process the request straight away and exit */
+
+	if (info == NULL) {
+		ret = ohci_hub_control(hcd, typeReq, wValue,
+				       wIndex, buf, wLength);
+		goto out;
+	}
+
+	/* check the request to see if it needs handling */
+
+	switch (typeReq) {
+	case SetPortFeature:
+		if (wValue == USB_PORT_FEAT_POWER) {
+			dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
+			s3c2410_usb_set_power(info, wIndex, 1);
+			goto out;
+		}
+		break;
+
+	case ClearPortFeature:
+		switch (wValue) {
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: C_OVER_CURRENT\n");
+
+			if (valid_port(wIndex)) {
+				info->port[wIndex-1].oc_changed = 0;
+				info->port[wIndex-1].oc_status = 0;
+			}
+
+			goto out;
+
+		case USB_PORT_FEAT_OVER_CURRENT:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: OVER_CURRENT\n");
+
+			if (valid_port(wIndex))
+				info->port[wIndex-1].oc_status = 0;
+
+			goto out;
+
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: POWER\n");
+
+			if (valid_port(wIndex)) {
+				s3c2410_usb_set_power(info, wIndex, 0);
+				return 0;
+			}
+		}
+		break;
+	}
+
+	ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+	if (ret)
+		goto out;
+
+	switch (typeReq) {
+	case GetHubDescriptor:
+
+		/* update the hub's descriptor */
+
+		desc = (struct usb_hub_descriptor *)buf;
+
+		if (info->power_control == NULL)
+			return ret;
+
+		dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
+			desc->wHubCharacteristics);
+
+		/* remove the old configurations for power-switching, and
+		 * over-current protection, and insert our new configuration
+		 */
+
+		desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
+		desc->wHubCharacteristics |= cpu_to_le16(
+			HUB_CHAR_INDV_PORT_LPSM);
+
+		if (info->enable_oc) {
+			desc->wHubCharacteristics &= ~cpu_to_le16(
+				HUB_CHAR_OCPM);
+			desc->wHubCharacteristics |=  cpu_to_le16(
+				HUB_CHAR_INDV_PORT_OCPM);
+		}
+
+		dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
+			desc->wHubCharacteristics);
+
+		return ret;
+
+	case GetPortStatus:
+		/* check port status */
+
+		dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
+
+		if (valid_port(wIndex)) {
+			if (info->port[wIndex-1].oc_changed)
+				*data |= cpu_to_le32(RH_PS_OCIC);
+
+			if (info->port[wIndex-1].oc_status)
+				*data |= cpu_to_le32(RH_PS_POCI);
+		}
+	}
+
+ out:
+	return ret;
+}
+
+/* s3c2410_hcd_oc
+ *
+ * handle an over-current report
+*/
+
+static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
+{
+	struct s3c2410_hcd_port *port;
+	unsigned long flags;
+	int portno;
+
+	if (info == NULL)
+		return;
+
+	port = &info->port[0];
+
+	local_irq_save(flags);
+
+	for (portno = 0; portno < 2; port++, portno++) {
+		if (port_oc & (1<<portno) &&
+		    port->flags & S3C_HCDFLG_USED) {
+			port->oc_status = 1;
+			port->oc_changed = 1;
+
+			/* ok, once over-current is detected,
+			   the port needs to be powered down */
+			s3c2410_usb_set_power(info, portno+1, 0);
+		}
+	}
+
+	local_irq_restore(flags);
+}
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+/*
+ * ohci_hcd_s3c2410_remove - shutdown processing for HCD
+ * @dev: USB Host Controller being removed
+ *
+ * Context: task context, might sleep
+ *
+ * Reverses the effect of ohci_hcd_3c2410_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ */
+static int
+ohci_hcd_s3c2410_remove(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+
+	usb_remove_hcd(hcd);
+	s3c2410_stop_hc(dev);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+/*
+ * ohci_hcd_s3c2410_probe - initialize S3C2410-based HCDs
+ * @dev: USB Host Controller to be probed
+ *
+ * Context: task context, might sleep
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ */
+static int ohci_hcd_s3c2410_probe(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = NULL;
+	struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev);
+	int retval, irq;
+
+	s3c2410_usb_set_power(info, 1, 1);
+	s3c2410_usb_set_power(info, 2, 1);
+
+	hcd = usb_create_hcd(&ohci_s3c2410_hc_driver, &dev->dev, "s3c24xx");
+	if (hcd == NULL)
+		return -ENOMEM;
+
+	hcd->rsrc_start = dev->resource[0].start;
+	hcd->rsrc_len	= resource_size(&dev->resource[0]);
+
+	hcd->regs = devm_ioremap_resource(&dev->dev, &dev->resource[0]);
+	if (IS_ERR(hcd->regs)) {
+		retval = PTR_ERR(hcd->regs);
+		goto err_put;
+	}
+
+	clk = devm_clk_get(&dev->dev, "usb-host");
+	if (IS_ERR(clk)) {
+		dev_err(&dev->dev, "cannot get usb-host clock\n");
+		retval = PTR_ERR(clk);
+		goto err_put;
+	}
+
+	usb_clk = devm_clk_get(&dev->dev, "usb-bus-host");
+	if (IS_ERR(usb_clk)) {
+		dev_err(&dev->dev, "cannot get usb-bus-host clock\n");
+		retval = PTR_ERR(usb_clk);
+		goto err_put;
+	}
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		retval = irq;
+		goto err_put;
+	}
+
+	s3c2410_start_hc(dev, hcd);
+
+	retval = usb_add_hcd(hcd, irq, 0);
+	if (retval != 0)
+		goto err_ioremap;
+
+	device_wakeup_enable(hcd->self.controller);
+	return 0;
+
+ err_ioremap:
+	s3c2410_stop_hc(dev);
+
+ err_put:
+	usb_put_hcd(hcd);
+	return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+static int ohci_hcd_s3c2410_drv_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct platform_device *pdev = to_platform_device(dev);
+	bool do_wakeup = device_may_wakeup(dev);
+	int rc = 0;
+
+	rc = ohci_suspend(hcd, do_wakeup);
+	if (rc)
+		return rc;
+
+	s3c2410_stop_hc(pdev);
+
+	return rc;
+}
+
+static int ohci_hcd_s3c2410_drv_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct platform_device *pdev = to_platform_device(dev);
+
+	s3c2410_start_hc(pdev, hcd);
+
+	ohci_resume(hcd, false);
+
+	return 0;
+}
+#else
+#define ohci_hcd_s3c2410_drv_suspend	NULL
+#define ohci_hcd_s3c2410_drv_resume	NULL
+#endif
+
+static const struct dev_pm_ops ohci_hcd_s3c2410_pm_ops = {
+	.suspend	= ohci_hcd_s3c2410_drv_suspend,
+	.resume		= ohci_hcd_s3c2410_drv_resume,
+};
+
+static const struct of_device_id ohci_hcd_s3c2410_dt_ids[] = {
+	{ .compatible = "samsung,s3c2410-ohci" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, ohci_hcd_s3c2410_dt_ids);
+
+static struct platform_driver ohci_hcd_s3c2410_driver = {
+	.probe		= ohci_hcd_s3c2410_probe,
+	.remove		= ohci_hcd_s3c2410_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "s3c2410-ohci",
+		.pm	= &ohci_hcd_s3c2410_pm_ops,
+		.of_match_table	= ohci_hcd_s3c2410_dt_ids,
+	},
+};
+
+static int __init ohci_s3c2410_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ohci_init_driver(&ohci_s3c2410_hc_driver, NULL);
+
+	/*
+	 * The Samsung HW has some unusual quirks, which require
+	 * Sumsung-specific workarounds. We override certain hc_driver
+	 * functions here to achieve that. We explicitly do not enhance
+	 * ohci_driver_overrides to allow this more easily, since this
+	 * is an unusual case, and we don't want to encourage others to
+	 * override these functions by making it too easy.
+	 */
+
+	ohci_s3c2410_hc_driver.hub_status_data	= ohci_s3c2410_hub_status_data;
+	ohci_s3c2410_hc_driver.hub_control	= ohci_s3c2410_hub_control;
+
+	return platform_driver_register(&ohci_hcd_s3c2410_driver);
+}
+module_init(ohci_s3c2410_init);
+
+static void __exit ohci_s3c2410_cleanup(void)
+{
+	platform_driver_unregister(&ohci_hcd_s3c2410_driver);
+}
+module_exit(ohci_s3c2410_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c2410-ohci");
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
new file mode 100644
index 000000000..75c2b28b3
--- /dev/null
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ *
+ * SA1111 Bus Glue
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Russell King et al.
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <asm/mach-types.h>
+#include <asm/hardware/sa1111.h>
+
+#ifndef CONFIG_SA1111
+#error "This file is SA-1111 bus glue.  CONFIG_SA1111 must be defined."
+#endif
+
+#define USB_STATUS	0x0118
+#define USB_RESET	0x011c
+#define USB_IRQTEST	0x0120
+
+#define USB_RESET_FORCEIFRESET	(1 << 0)
+#define USB_RESET_FORCEHCRESET	(1 << 1)
+#define USB_RESET_CLKGENRESET	(1 << 2)
+#define USB_RESET_SIMSCALEDOWN	(1 << 3)
+#define USB_RESET_USBINTTEST	(1 << 4)
+#define USB_RESET_SLEEPSTBYEN	(1 << 5)
+#define USB_RESET_PWRSENSELOW	(1 << 6)
+#define USB_RESET_PWRCTRLLOW	(1 << 7)
+
+#define USB_STATUS_IRQHCIRMTWKUP  (1 <<  7)
+#define USB_STATUS_IRQHCIBUFFACC  (1 <<  8)
+#define USB_STATUS_NIRQHCIM       (1 <<  9)
+#define USB_STATUS_NHCIMFCLR      (1 << 10)
+#define USB_STATUS_USBPWRSENSE    (1 << 11)
+
+#if 0
+static void dump_hci_status(struct usb_hcd *hcd, const char *label)
+{
+	unsigned long status = readl_relaxed(hcd->regs + USB_STATUS);
+
+	printk(KERN_DEBUG "%s USB_STATUS = { %s%s%s%s%s}\n", label,
+	     ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
+	     ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
+	     ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
+	     ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
+	     ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
+}
+#endif
+
+static int ohci_sa1111_reset(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+	ohci_hcd_init(ohci);
+	return ohci_init(ohci);
+}
+
+static int ohci_sa1111_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	int ret;
+
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		ohci_err(ohci, "can't start\n");
+		ohci_stop(hcd);
+	}
+	return ret;
+}
+
+static const struct hc_driver ohci_sa1111_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"SA-1111 OHCI",
+	.hcd_priv_size =	sizeof(struct ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			ohci_irq,
+	.flags =		HCD_USB11 | HCD_DMA | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset =		ohci_sa1111_reset,
+	.start =		ohci_sa1111_start,
+	.stop =			ohci_stop,
+	.shutdown =		ohci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	ohci_hub_status_data,
+	.hub_control =		ohci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend =		ohci_bus_suspend,
+	.bus_resume =		ohci_bus_resume,
+#endif
+	.start_port_reset =	ohci_start_port_reset,
+};
+
+static int sa1111_start_hc(struct sa1111_dev *dev)
+{
+	unsigned int usb_rst = 0;
+	int ret;
+
+	dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n");
+
+	if (machine_is_xp860() ||
+	    machine_is_assabet() ||
+	    machine_is_pfs168() ||
+	    machine_is_badge4())
+		usb_rst = USB_RESET_PWRSENSELOW | USB_RESET_PWRCTRLLOW;
+
+	/*
+	 * Configure the power sense and control lines.  Place the USB
+	 * host controller in reset.
+	 */
+	writel_relaxed(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
+		      dev->mapbase + USB_RESET);
+
+	/*
+	 * Now, carefully enable the USB clock, and take
+	 * the USB host controller out of reset.
+	 */
+	ret = sa1111_enable_device(dev);
+	if (ret == 0) {
+		udelay(11);
+		writel_relaxed(usb_rst, dev->mapbase + USB_RESET);
+	}
+
+	return ret;
+}
+
+static void sa1111_stop_hc(struct sa1111_dev *dev)
+{
+	unsigned int usb_rst;
+
+	dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n");
+
+	/*
+	 * Put the USB host controller into reset.
+	 */
+	usb_rst = readl_relaxed(dev->mapbase + USB_RESET);
+	writel_relaxed(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
+		      dev->mapbase + USB_RESET);
+
+	/*
+	 * Stop the USB clock.
+	 */
+	sa1111_disable_device(dev);
+}
+
+/**
+ * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it.
+ */
+static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
+{
+	struct usb_hcd *hcd;
+	int ret, irq;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	/*
+	 * We don't call dma_set_mask_and_coherent() here because the
+	 * DMA mask has already been appropraitely setup by the core
+	 * SA-1111 bus code (which includes bug workarounds.)
+	 */
+
+	hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111");
+	if (!hcd)
+		return -ENOMEM;
+
+	hcd->rsrc_start = dev->res.start;
+	hcd->rsrc_len = resource_size(&dev->res);
+
+	irq = sa1111_get_irq(dev, 1);
+	if (irq <= 0) {
+		ret = irq ? : -ENXIO;
+		goto err1;
+	}
+
+	/*
+	 * According to the "Intel StrongARM SA-1111 Microprocessor Companion
+	 * Chip Specification Update" (June 2000), erratum #7, there is a
+	 * significant bug in the SA1111 SDRAM shared memory controller.  If
+	 * an access to a region of memory above 1MB relative to the bank base,
+	 * it is important that address bit 10 _NOT_ be asserted. Depending
+	 * on the configuration of the RAM, bit 10 may correspond to one
+	 * of several different (processor-relative) address bits.
+	 *
+	 * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
+	 * User's Guide" mentions that jumpers R51 and R52 control the
+	 * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
+	 * SDRAM bank 1 on Neponset). The default configuration selects
+	 * Assabet, so any address in bank 1 is necessarily invalid.
+	 *
+	 * As a workaround, use a bounce buffer in addressable memory
+	 * as local_mem, relying on ZONE_DMA to provide an area that
+	 * fits within the above constraints.
+	 *
+	 * SZ_64K is an estimate for what size this might need.
+	 */
+	ret = usb_hcd_setup_local_mem(hcd, 0, 0, SZ_64K);
+	if (ret)
+		goto err1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		dev_dbg(&dev->dev, "request_mem_region failed\n");
+		ret = -EBUSY;
+		goto err1;
+	}
+
+	hcd->regs = dev->mapbase;
+
+	ret = sa1111_start_hc(dev);
+	if (ret)
+		goto err2;
+
+	ret = usb_add_hcd(hcd, irq, 0);
+	if (ret == 0) {
+		device_wakeup_enable(hcd->self.controller);
+		return ret;
+	}
+
+	sa1111_stop_hc(dev);
+ err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ err1:
+	usb_put_hcd(hcd);
+	return ret;
+}
+
+/**
+ * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
+ * @dev: USB Host Controller being removed
+ *
+ * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking
+ * the HCD's stop() method.
+ */
+static void ohci_hcd_sa1111_remove(struct sa1111_dev *dev)
+{
+	struct usb_hcd *hcd = sa1111_get_drvdata(dev);
+
+	usb_remove_hcd(hcd);
+	sa1111_stop_hc(dev);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+}
+
+static void ohci_hcd_sa1111_shutdown(struct device *_dev)
+{
+	struct sa1111_dev *dev = to_sa1111_device(_dev);
+	struct usb_hcd *hcd = sa1111_get_drvdata(dev);
+
+	if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+		hcd->driver->shutdown(hcd);
+		sa1111_stop_hc(dev);
+	}
+}
+
+static struct sa1111_driver ohci_hcd_sa1111_driver = {
+	.drv = {
+		.name	= "sa1111-ohci",
+		.owner	= THIS_MODULE,
+		.shutdown = ohci_hcd_sa1111_shutdown,
+	},
+	.devid		= SA1111_DEVID_USB,
+	.probe		= ohci_hcd_sa1111_probe,
+	.remove		= ohci_hcd_sa1111_remove,
+};
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
new file mode 100644
index 000000000..f5de58645
--- /dev/null
+++ b/drivers/usb/host/ohci-sm501.c
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2005 David Brownell
+ * (C) Copyright 2002 Hewlett-Packard Company
+ * (C) Copyright 2008 Magnus Damm
+ *
+ * SM501 Bus Glue - based on ohci-omap.c
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+
+static int ohci_sm501_init(struct usb_hcd *hcd)
+{
+	return ohci_init(hcd_to_ohci(hcd));
+}
+
+static int ohci_sm501_start(struct usb_hcd *hcd)
+{
+	struct device *dev = hcd->self.controller;
+	int ret;
+
+	ret = ohci_run(hcd_to_ohci(hcd));
+	if (ret < 0) {
+		dev_err(dev, "can't start %s", hcd->self.bus_name);
+		ohci_stop(hcd);
+	}
+
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct hc_driver ohci_sm501_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"SM501 OHCI",
+	.hcd_priv_size =	sizeof(struct ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			ohci_irq,
+	.flags =		HCD_USB11 | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset =		ohci_sm501_init,
+	.start =		ohci_sm501_start,
+	.stop =			ohci_stop,
+	.shutdown =		ohci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	ohci_hub_status_data,
+	.hub_control =		ohci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend =		ohci_bus_suspend,
+	.bus_resume =		ohci_bus_resume,
+#endif
+	.start_port_reset =	ohci_start_port_reset,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int ohci_hcd_sm501_drv_probe(struct platform_device *pdev)
+{
+	const struct hc_driver *driver = &ohci_sm501_hc_driver;
+	struct device *dev = &pdev->dev;
+	struct resource	*res, *mem;
+	int retval, irq;
+	struct usb_hcd *hcd = NULL;
+
+	irq = retval = platform_get_irq(pdev, 0);
+	if (retval < 0)
+		goto err0;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (mem == NULL) {
+		dev_err(dev, "no resource definition for memory\n");
+		retval = -ENOENT;
+		goto err0;
+	}
+
+	if (!request_mem_region(mem->start, resource_size(mem), pdev->name)) {
+		dev_err(dev, "request_mem_region failed\n");
+		retval = -EBUSY;
+		goto err0;
+	}
+
+	/* allocate, reserve and remap resources for registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "no resource definition for registers\n");
+		retval = -ENOENT;
+		goto err1;
+	}
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err1;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,	pdev->name)) {
+		dev_err(dev, "request_mem_region failed\n");
+		retval = -EBUSY;
+		goto err3;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_err(dev, "cannot remap registers\n");
+		retval = -ENXIO;
+		goto err4;
+	}
+
+	ohci_hcd_init(hcd_to_ohci(hcd));
+
+	/* The sm501 chip is equipped with local memory that may be used
+	 * by on-chip devices such as the video controller and the usb host.
+	 * This driver uses genalloc so that usb allocations with
+	 * gen_pool_dma_alloc() allocate from this local memory. The dma_handle
+	 * returned by gen_pool_dma_alloc() will be an offset starting from 0
+	 * for the first local memory byte.
+	 *
+	 * So as long as data is allocated using gen_pool_dma_alloc() all is
+	 * fine. This is however not always the case - buffers may be allocated
+	 * using kmalloc() - so the usb core needs to be told that it must copy
+	 * data into our local memory if the buffers happen to be placed in
+	 * regular memory. A non-null hcd->localmem_pool initialized by
+	 * the call to usb_hcd_setup_local_mem() below does just that.
+	 */
+
+	retval = usb_hcd_setup_local_mem(hcd, mem->start,
+					 mem->start - mem->parent->start,
+					 resource_size(mem));
+	if (retval < 0)
+		goto err5;
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval)
+		goto err5;
+	device_wakeup_enable(hcd->self.controller);
+
+	/* enable power and unmask interrupts */
+
+	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1);
+	sm501_modify_reg(dev->parent, SM501_IRQ_MASK, 1 << 6, 0);
+
+	return 0;
+err5:
+	iounmap(hcd->regs);
+err4:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err3:
+	usb_put_hcd(hcd);
+err1:
+	release_mem_region(mem->start, resource_size(mem));
+err0:
+	return retval;
+}
+
+static int ohci_hcd_sm501_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct resource	*mem;
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (mem)
+		release_mem_region(mem->start, resource_size(mem));
+
+	/* mask interrupts and disable power */
+
+	sm501_modify_reg(pdev->dev.parent, SM501_IRQ_MASK, 0, 1 << 6);
+	sm501_unit_power(pdev->dev.parent, SM501_GATE_USB_HOST, 0);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+static int ohci_sm501_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_hcd  *hcd = platform_get_drvdata(pdev);
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	bool do_wakeup = device_may_wakeup(dev);
+	int ret;
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ret = ohci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+
+	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 0);
+	return ret;
+}
+
+static int ohci_sm501_resume(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1);
+	ohci_resume(hcd, false);
+	return 0;
+}
+#else
+#define ohci_sm501_suspend NULL
+#define ohci_sm501_resume NULL
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Driver definition to register with the SM501 bus
+ */
+static struct platform_driver ohci_hcd_sm501_driver = {
+	.probe		= ohci_hcd_sm501_drv_probe,
+	.remove		= ohci_hcd_sm501_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.suspend	= ohci_sm501_suspend,
+	.resume		= ohci_sm501_resume,
+	.driver		= {
+		.name	= "sm501-usb",
+	},
+};
+MODULE_ALIAS("platform:sm501-usb");
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
new file mode 100644
index 000000000..196951a27
--- /dev/null
+++ b/drivers/usb/host/ohci-spear.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+* OHCI HCD (Host Controller Driver) for USB.
+*
+* Copyright (C) 2010 ST Microelectronics.
+* Deepak Sikri<deepak.sikri@st.com>
+*
+* Based on various ohci-*.c drivers
+*/
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/signal.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+
+#define DRIVER_DESC "OHCI SPEAr driver"
+
+struct spear_ohci {
+	struct clk *clk;
+};
+
+#define to_spear_ohci(hcd)     (struct spear_ohci *)(hcd_to_ohci(hcd)->priv)
+
+static struct hc_driver __read_mostly ohci_spear_hc_driver;
+
+static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
+{
+	const struct hc_driver *driver = &ohci_spear_hc_driver;
+	struct usb_hcd *hcd = NULL;
+	struct clk *usbh_clk;
+	struct spear_ohci *sohci_p;
+	struct resource *res;
+	int retval, irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		retval = irq;
+		goto fail;
+	}
+
+	/*
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	retval = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (retval)
+		goto fail;
+
+	usbh_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(usbh_clk)) {
+		dev_err(&pdev->dev, "Error getting interface clock\n");
+		retval = PTR_ERR(usbh_clk);
+		goto fail;
+	}
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto fail;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(hcd->regs)) {
+		retval = PTR_ERR(hcd->regs);
+		goto err_put_hcd;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	sohci_p = to_spear_ohci(hcd);
+	sohci_p->clk = usbh_clk;
+
+	clk_prepare_enable(sohci_p->clk);
+
+	retval = usb_add_hcd(hcd, irq, 0);
+	if (retval == 0) {
+		device_wakeup_enable(hcd->self.controller);
+		return retval;
+	}
+
+	clk_disable_unprepare(sohci_p->clk);
+err_put_hcd:
+	usb_put_hcd(hcd);
+fail:
+	dev_err(&pdev->dev, "init fail, %d\n", retval);
+
+	return retval;
+}
+
+static int spear_ohci_hcd_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct spear_ohci *sohci_p = to_spear_ohci(hcd);
+
+	usb_remove_hcd(hcd);
+	if (sohci_p->clk)
+		clk_disable_unprepare(sohci_p->clk);
+
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+#if defined(CONFIG_PM)
+static int spear_ohci_hcd_drv_suspend(struct platform_device *pdev,
+		pm_message_t message)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	struct spear_ohci *sohci_p = to_spear_ohci(hcd);
+	bool do_wakeup = device_may_wakeup(&pdev->dev);
+	int ret;
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ret = ohci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+
+	clk_disable_unprepare(sohci_p->clk);
+
+	return ret;
+}
+
+static int spear_ohci_hcd_drv_resume(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	struct spear_ohci *sohci_p = to_spear_ohci(hcd);
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	clk_prepare_enable(sohci_p->clk);
+	ohci_resume(hcd, false);
+	return 0;
+}
+#endif
+
+static const struct of_device_id spear_ohci_id_table[] = {
+	{ .compatible = "st,spear600-ohci", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, spear_ohci_id_table);
+
+/* Driver definition to register with the platform bus */
+static struct platform_driver spear_ohci_hcd_driver = {
+	.probe =	spear_ohci_hcd_drv_probe,
+	.remove =	spear_ohci_hcd_drv_remove,
+#ifdef CONFIG_PM
+	.suspend =	spear_ohci_hcd_drv_suspend,
+	.resume =	spear_ohci_hcd_drv_resume,
+#endif
+	.driver = {
+		.name = "spear-ohci",
+		.of_match_table = spear_ohci_id_table,
+	},
+};
+
+static const struct ohci_driver_overrides spear_overrides __initconst = {
+	.extra_priv_size = sizeof(struct spear_ohci),
+};
+static int __init ohci_spear_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ohci_init_driver(&ohci_spear_hc_driver, &spear_overrides);
+	return platform_driver_register(&spear_ohci_hcd_driver);
+}
+module_init(ohci_spear_init);
+
+static void __exit ohci_spear_cleanup(void)
+{
+	platform_driver_unregister(&spear_ohci_hcd_driver);
+}
+module_exit(ohci_spear_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Deepak Sikri");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:spear-ohci");
diff --git a/drivers/usb/host/ohci-st.c b/drivers/usb/host/ohci-st.c
new file mode 100644
index 000000000..82eef3c62
--- /dev/null
+++ b/drivers/usb/host/ohci-st.c
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ST OHCI driver
+ *
+ * Copyright (C) 2014 STMicroelectronics – All Rights Reserved
+ *
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * Derived from ohci-platform.c
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+
+#define USB_MAX_CLKS 3
+
+struct st_ohci_platform_priv {
+	struct clk *clks[USB_MAX_CLKS];
+	struct clk *clk48;
+	struct reset_control *rst;
+	struct reset_control *pwr;
+	struct phy *phy;
+};
+
+#define DRIVER_DESC "OHCI STMicroelectronics driver"
+
+#define hcd_to_ohci_priv(h) \
+	((struct st_ohci_platform_priv *)hcd_to_ohci(h)->priv)
+
+static int st_ohci_platform_power_on(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+	int clk, ret;
+
+	ret = reset_control_deassert(priv->pwr);
+	if (ret)
+		return ret;
+
+	ret = reset_control_deassert(priv->rst);
+	if (ret)
+		goto err_assert_power;
+
+	/* some SoCs don't have a dedicated 48Mhz clock, but those that do
+	   need the rate to be explicitly set */
+	if (priv->clk48) {
+		ret = clk_set_rate(priv->clk48, 48000000);
+		if (ret)
+			goto err_assert_reset;
+	}
+
+	for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++) {
+		ret = clk_prepare_enable(priv->clks[clk]);
+		if (ret)
+			goto err_disable_clks;
+	}
+
+	ret = phy_init(priv->phy);
+	if (ret)
+		goto err_disable_clks;
+
+	ret = phy_power_on(priv->phy);
+	if (ret)
+		goto err_exit_phy;
+
+	return 0;
+
+err_exit_phy:
+	phy_exit(priv->phy);
+err_disable_clks:
+	while (--clk >= 0)
+		clk_disable_unprepare(priv->clks[clk]);
+err_assert_reset:
+	reset_control_assert(priv->rst);
+err_assert_power:
+	reset_control_assert(priv->pwr);
+
+	return ret;
+}
+
+static void st_ohci_platform_power_off(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+
+	int clk;
+
+	reset_control_assert(priv->pwr);
+
+	reset_control_assert(priv->rst);
+
+	phy_power_off(priv->phy);
+
+	phy_exit(priv->phy);
+
+	for (clk = USB_MAX_CLKS - 1; clk >= 0; clk--)
+		if (priv->clks[clk])
+			clk_disable_unprepare(priv->clks[clk]);
+}
+
+static struct hc_driver __read_mostly ohci_platform_hc_driver;
+
+static const struct ohci_driver_overrides platform_overrides __initconst = {
+	.product_desc =		"ST OHCI controller",
+	.extra_priv_size =	sizeof(struct st_ohci_platform_priv),
+};
+
+static struct usb_ohci_pdata ohci_platform_defaults = {
+	.power_on =		st_ohci_platform_power_on,
+	.power_suspend =	st_ohci_platform_power_off,
+	.power_off =		st_ohci_platform_power_off,
+};
+
+static int st_ohci_platform_probe(struct platform_device *dev)
+{
+	struct usb_hcd *hcd;
+	struct resource *res_mem;
+	struct usb_ohci_pdata *pdata = &ohci_platform_defaults;
+	struct st_ohci_platform_priv *priv;
+	int err, irq, clk = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0)
+		return irq;
+
+	res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res_mem) {
+		dev_err(&dev->dev, "no memory resource provided");
+		return -ENXIO;
+	}
+
+	hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
+			dev_name(&dev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	platform_set_drvdata(dev, hcd);
+	dev->dev.platform_data = pdata;
+	priv = hcd_to_ohci_priv(hcd);
+
+	priv->phy = devm_phy_get(&dev->dev, "usb");
+	if (IS_ERR(priv->phy)) {
+		err = PTR_ERR(priv->phy);
+		goto err_put_hcd;
+	}
+
+	for (clk = 0; clk < USB_MAX_CLKS; clk++) {
+		priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
+		if (IS_ERR(priv->clks[clk])) {
+			err = PTR_ERR(priv->clks[clk]);
+			if (err == -EPROBE_DEFER)
+				goto err_put_clks;
+			priv->clks[clk] = NULL;
+			break;
+		}
+	}
+
+	/* some SoCs don't have a dedicated 48Mhz clock, but those that
+	   do need the rate to be explicitly set */
+	priv->clk48 = devm_clk_get(&dev->dev, "clk48");
+	if (IS_ERR(priv->clk48)) {
+		dev_info(&dev->dev, "48MHz clk not found\n");
+		priv->clk48 = NULL;
+	}
+
+	priv->pwr =
+		devm_reset_control_get_optional_shared(&dev->dev, "power");
+	if (IS_ERR(priv->pwr)) {
+		err = PTR_ERR(priv->pwr);
+		goto err_put_clks;
+	}
+
+	priv->rst =
+		devm_reset_control_get_optional_shared(&dev->dev, "softreset");
+	if (IS_ERR(priv->rst)) {
+		err = PTR_ERR(priv->rst);
+		goto err_put_clks;
+	}
+
+	if (pdata->power_on) {
+		err = pdata->power_on(dev);
+		if (err < 0)
+			goto err_power;
+	}
+
+	hcd->rsrc_start = res_mem->start;
+	hcd->rsrc_len = resource_size(res_mem);
+
+	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
+	if (IS_ERR(hcd->regs)) {
+		err = PTR_ERR(hcd->regs);
+		goto err_power;
+	}
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (err)
+		goto err_power;
+
+	device_wakeup_enable(hcd->self.controller);
+
+	platform_set_drvdata(dev, hcd);
+
+	return err;
+
+err_power:
+	if (pdata->power_off)
+		pdata->power_off(dev);
+
+err_put_clks:
+	while (--clk >= 0)
+		clk_put(priv->clks[clk]);
+err_put_hcd:
+	if (pdata == &ohci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	usb_put_hcd(hcd);
+
+	return err;
+}
+
+static int st_ohci_platform_remove(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
+	struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+	int clk;
+
+	usb_remove_hcd(hcd);
+
+	if (pdata->power_off)
+		pdata->power_off(dev);
+
+
+	for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++)
+		clk_put(priv->clks[clk]);
+
+	usb_put_hcd(hcd);
+
+	if (pdata == &ohci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int st_ohci_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct usb_ohci_pdata *pdata = dev->platform_data;
+	struct platform_device *pdev = to_platform_device(dev);
+	bool do_wakeup = device_may_wakeup(dev);
+	int ret;
+
+	ret = ohci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+
+	if (pdata->power_suspend)
+		pdata->power_suspend(pdev);
+
+	return ret;
+}
+
+static int st_ohci_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct usb_ohci_pdata *pdata = dev_get_platdata(dev);
+	struct platform_device *pdev = to_platform_device(dev);
+	int err;
+
+	if (pdata->power_on) {
+		err = pdata->power_on(pdev);
+		if (err < 0)
+			return err;
+	}
+
+	ohci_resume(hcd, false);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(st_ohci_pm_ops, st_ohci_suspend, st_ohci_resume);
+
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct of_device_id st_ohci_platform_ids[] = {
+	{ .compatible = "st,st-ohci-300x", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, st_ohci_platform_ids);
+
+static struct platform_driver ohci_platform_driver = {
+	.probe		= st_ohci_platform_probe,
+	.remove		= st_ohci_platform_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "st-ohci",
+#ifdef CONFIG_PM_SLEEP
+		.pm	= &st_ohci_pm_ops,
+#endif
+		.of_match_table = st_ohci_platform_ids,
+	}
+};
+
+static int __init ohci_platform_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	ohci_init_driver(&ohci_platform_hc_driver, &platform_overrides);
+	return platform_driver_register(&ohci_platform_driver);
+}
+module_init(ohci_platform_init);
+
+static void __exit ohci_platform_cleanup(void)
+{
+	platform_driver_unregister(&ohci_platform_driver);
+}
+module_exit(ohci_platform_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
new file mode 100644
index 000000000..49539b9f0
--- /dev/null
+++ b/drivers/usb/host/ohci-tmio.c
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OHCI HCD(Host Controller Driver) for USB.
+ *
+ *(C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ *(C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ *(C) Copyright 2002 Hewlett-Packard Company
+ *
+ * Bus glue for Toshiba Mobile IO(TMIO) Controller's OHCI core
+ * (C) Copyright 2005 Chris Humbert <mahadri-usb@drigon.com>
+ * (C) Copyright 2007, 2008 Dmitry Baryshkov <dbaryshkov@gmail.com>
+ *
+ * This is known to work with the following variants:
+ *	TC6393XB revision 3	(32kB SRAM)
+ *
+ * The TMIO's OHCI core DMAs through a small internal buffer that
+ * is directly addressable by the CPU.
+ *
+ * Written from sparse documentation from Toshiba and Sharp's driver
+ * for the 2.4 kernel,
+ *	usb-ohci-tc6393.c(C) Copyright 2004 Lineo Solutions, Inc.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/dma-mapping.h>
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * USB Host Controller Configuration Register
+ */
+#define CCR_REVID	0x08	/* b Revision ID				*/
+#define CCR_BASE	0x10	/* l USB Control Register Base Address Low	*/
+#define CCR_ILME	0x40	/* b Internal Local Memory Enable		*/
+#define CCR_PM		0x4c	/* w Power Management			*/
+#define CCR_INTC	0x50	/* b INT Control				*/
+#define CCR_LMW1L	0x54	/* w Local Memory Window 1 LMADRS Low	*/
+#define CCR_LMW1H	0x56	/* w Local Memory Window 1 LMADRS High	*/
+#define CCR_LMW1BL	0x58	/* w Local Memory Window 1 Base Address Low	*/
+#define CCR_LMW1BH	0x5A	/* w Local Memory Window 1 Base Address High	*/
+#define CCR_LMW2L	0x5C	/* w Local Memory Window 2 LMADRS Low	*/
+#define CCR_LMW2H	0x5E	/* w Local Memory Window 2 LMADRS High	*/
+#define CCR_LMW2BL	0x60	/* w Local Memory Window 2 Base Address Low	*/
+#define CCR_LMW2BH	0x62	/* w Local Memory Window 2 Base Address High	*/
+#define CCR_MISC	0xFC	/* b MISC					*/
+
+#define CCR_PM_GKEN      0x0001
+#define CCR_PM_CKRNEN    0x0002
+#define CCR_PM_USBPW1    0x0004
+#define CCR_PM_USBPW2    0x0008
+#define CCR_PM_USBPW3    0x0010
+#define CCR_PM_PMEE      0x0100
+#define CCR_PM_PMES      0x8000
+
+/*-------------------------------------------------------------------------*/
+
+struct tmio_hcd {
+	void __iomem		*ccr;
+	spinlock_t		lock; /* protects RMW cycles */
+};
+
+#define hcd_to_tmio(hcd)	((struct tmio_hcd *)(hcd_to_ohci(hcd) + 1))
+
+/*-------------------------------------------------------------------------*/
+
+static void tmio_write_pm(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct tmio_hcd *tmio = hcd_to_tmio(hcd);
+	u16 pm;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tmio->lock, flags);
+
+	pm = CCR_PM_GKEN | CCR_PM_CKRNEN |
+	     CCR_PM_PMEE | CCR_PM_PMES;
+
+	tmio_iowrite16(pm, tmio->ccr + CCR_PM);
+	spin_unlock_irqrestore(&tmio->lock, flags);
+}
+
+static void tmio_stop_hc(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	struct tmio_hcd *tmio = hcd_to_tmio(hcd);
+	u16 pm;
+
+	pm = CCR_PM_GKEN | CCR_PM_CKRNEN;
+	switch (ohci->num_ports) {
+		default:
+			dev_err(&dev->dev, "Unsupported amount of ports: %d\n", ohci->num_ports);
+			fallthrough;
+		case 3:
+			pm |= CCR_PM_USBPW3;
+			fallthrough;
+		case 2:
+			pm |= CCR_PM_USBPW2;
+			fallthrough;
+		case 1:
+			pm |= CCR_PM_USBPW1;
+	}
+	tmio_iowrite8(0, tmio->ccr + CCR_INTC);
+	tmio_iowrite8(0, tmio->ccr + CCR_ILME);
+	tmio_iowrite16(0, tmio->ccr + CCR_BASE);
+	tmio_iowrite16(0, tmio->ccr + CCR_BASE + 2);
+	tmio_iowrite16(pm, tmio->ccr + CCR_PM);
+}
+
+static void tmio_start_hc(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct tmio_hcd *tmio = hcd_to_tmio(hcd);
+	unsigned long base = hcd->rsrc_start;
+
+	tmio_write_pm(dev);
+	tmio_iowrite16(base, tmio->ccr + CCR_BASE);
+	tmio_iowrite16(base >> 16, tmio->ccr + CCR_BASE + 2);
+	tmio_iowrite8(1, tmio->ccr + CCR_ILME);
+	tmio_iowrite8(2, tmio->ccr + CCR_INTC);
+
+	dev_info(&dev->dev, "revision %d @ 0x%08llx, irq %d\n",
+			tmio_ioread8(tmio->ccr + CCR_REVID),
+			(u64) hcd->rsrc_start, hcd->irq);
+}
+
+static int ohci_tmio_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	int ret;
+
+	if ((ret = ohci_init(ohci)) < 0)
+		return ret;
+
+	if ((ret = ohci_run(ohci)) < 0) {
+		dev_err(hcd->self.controller, "can't start %s\n",
+			hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct hc_driver ohci_tmio_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"TMIO OHCI USB Host Controller",
+	.hcd_priv_size =	sizeof(struct ohci_hcd) + sizeof (struct tmio_hcd),
+
+	/* generic hardware linkage */
+	.irq =			ohci_irq,
+	.flags =		HCD_USB11 | HCD_MEMORY,
+
+	/* basic lifecycle operations */
+	.start =		ohci_tmio_start,
+	.stop =			ohci_stop,
+	.shutdown =		ohci_shutdown,
+
+	/* managing i/o requests and associated device resources */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/* scheduling support */
+	.get_frame_number =	ohci_get_frame,
+
+	/* root hub support */
+	.hub_status_data =	ohci_hub_status_data,
+	.hub_control =		ohci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend =		ohci_bus_suspend,
+	.bus_resume =		ohci_bus_resume,
+#endif
+	.start_port_reset =	ohci_start_port_reset,
+};
+
+/*-------------------------------------------------------------------------*/
+static struct platform_driver ohci_hcd_tmio_driver;
+
+static int ohci_hcd_tmio_drv_probe(struct platform_device *dev)
+{
+	const struct mfd_cell *cell = mfd_get_cell(dev);
+	struct resource *regs = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	struct resource *config = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	struct resource *sram = platform_get_resource(dev, IORESOURCE_MEM, 2);
+	int irq = platform_get_irq(dev, 0);
+	struct tmio_hcd *tmio;
+	struct ohci_hcd *ohci;
+	struct usb_hcd *hcd;
+	int ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	if (!cell || !regs || !config || !sram)
+		return -EINVAL;
+
+	if (irq < 0)
+		return irq;
+
+	hcd = usb_create_hcd(&ohci_tmio_hc_driver, &dev->dev, dev_name(&dev->dev));
+	if (!hcd) {
+		ret = -ENOMEM;
+		goto err_usb_create_hcd;
+	}
+
+	hcd->rsrc_start = regs->start;
+	hcd->rsrc_len = resource_size(regs);
+
+	tmio = hcd_to_tmio(hcd);
+
+	spin_lock_init(&tmio->lock);
+
+	tmio->ccr = ioremap(config->start, resource_size(config));
+	if (!tmio->ccr) {
+		ret = -ENOMEM;
+		goto err_ioremap_ccr;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		ret = -ENOMEM;
+		goto err_ioremap_regs;
+	}
+
+	if (cell->enable) {
+		ret = cell->enable(dev);
+		if (ret)
+			goto err_enable;
+	}
+
+	tmio_start_hc(dev);
+	ohci = hcd_to_ohci(hcd);
+	ohci_hcd_init(ohci);
+
+	ret = usb_hcd_setup_local_mem(hcd, sram->start, sram->start,
+				      resource_size(sram));
+	if (ret < 0)
+		goto err_enable;
+
+	ret = usb_add_hcd(hcd, irq, 0);
+	if (ret)
+		goto err_add_hcd;
+
+	device_wakeup_enable(hcd->self.controller);
+	if (ret == 0)
+		return ret;
+
+	usb_remove_hcd(hcd);
+
+err_add_hcd:
+	tmio_stop_hc(dev);
+	if (cell->disable)
+		cell->disable(dev);
+err_enable:
+	iounmap(hcd->regs);
+err_ioremap_regs:
+	iounmap(tmio->ccr);
+err_ioremap_ccr:
+	usb_put_hcd(hcd);
+err_usb_create_hcd:
+
+	return ret;
+}
+
+static int ohci_hcd_tmio_drv_remove(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct tmio_hcd *tmio = hcd_to_tmio(hcd);
+	const struct mfd_cell *cell = mfd_get_cell(dev);
+
+	usb_remove_hcd(hcd);
+	tmio_stop_hc(dev);
+	if (cell->disable)
+		cell->disable(dev);
+	iounmap(hcd->regs);
+	iounmap(tmio->ccr);
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ohci_hcd_tmio_drv_suspend(struct platform_device *dev, pm_message_t state)
+{
+	const struct mfd_cell *cell = mfd_get_cell(dev);
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	struct tmio_hcd *tmio = hcd_to_tmio(hcd);
+	unsigned long flags;
+	u8 misc;
+	int ret;
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	spin_lock_irqsave(&tmio->lock, flags);
+
+	misc = tmio_ioread8(tmio->ccr + CCR_MISC);
+	misc |= 1 << 3; /* USSUSP */
+	tmio_iowrite8(misc, tmio->ccr + CCR_MISC);
+
+	spin_unlock_irqrestore(&tmio->lock, flags);
+
+	if (cell->suspend) {
+		ret = cell->suspend(dev);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
+static int ohci_hcd_tmio_drv_resume(struct platform_device *dev)
+{
+	const struct mfd_cell *cell = mfd_get_cell(dev);
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	struct tmio_hcd *tmio = hcd_to_tmio(hcd);
+	unsigned long flags;
+	u8 misc;
+	int ret;
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	if (cell->resume) {
+		ret = cell->resume(dev);
+		if (ret)
+			return ret;
+	}
+
+	tmio_start_hc(dev);
+
+	spin_lock_irqsave(&tmio->lock, flags);
+
+	misc = tmio_ioread8(tmio->ccr + CCR_MISC);
+	misc &= ~(1 << 3); /* USSUSP */
+	tmio_iowrite8(misc, tmio->ccr + CCR_MISC);
+
+	spin_unlock_irqrestore(&tmio->lock, flags);
+
+	ohci_resume(hcd, false);
+
+	return 0;
+}
+#else
+#define ohci_hcd_tmio_drv_suspend NULL
+#define ohci_hcd_tmio_drv_resume NULL
+#endif
+
+static struct platform_driver ohci_hcd_tmio_driver = {
+	.probe		= ohci_hcd_tmio_drv_probe,
+	.remove		= ohci_hcd_tmio_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.suspend	= ohci_hcd_tmio_drv_suspend,
+	.resume		= ohci_hcd_tmio_drv_resume,
+	.driver		= {
+		.name	= "tmio-ohci",
+	},
+};
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
new file mode 100644
index 000000000..aac6285b3
--- /dev/null
+++ b/drivers/usb/host/ohci.h
@@ -0,0 +1,743 @@
+/* SPDX-License-Identifier: GPL-1.0+ */
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * This file is licenced under the GPL.
+ */
+
+/*
+ * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
+ * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the
+ * host controller implementation.
+ */
+typedef __u32 __bitwise __hc32;
+typedef __u16 __bitwise __hc16;
+
+/*
+ * OHCI Endpoint Descriptor (ED) ... holds TD queue
+ * See OHCI spec, section 4.2
+ *
+ * This is a "Queue Head" for those transfers, which is why
+ * both EHCI and UHCI call similar structures a "QH".
+ */
+struct ed {
+	/* first fields are hardware-specified */
+	__hc32			hwINFO;      /* endpoint config bitmap */
+	/* info bits defined by hcd */
+#define ED_DEQUEUE	(1 << 27)
+	/* info bits defined by the hardware */
+#define ED_ISO		(1 << 15)
+#define ED_SKIP		(1 << 14)
+#define ED_LOWSPEED	(1 << 13)
+#define ED_OUT		(0x01 << 11)
+#define ED_IN		(0x02 << 11)
+	__hc32			hwTailP;	/* tail of TD list */
+	__hc32			hwHeadP;	/* head of TD list (hc r/w) */
+#define ED_C		(0x02)			/* toggle carry */
+#define ED_H		(0x01)			/* halted */
+	__hc32			hwNextED;	/* next ED in list */
+
+	/* rest are purely for the driver's use */
+	dma_addr_t		dma;		/* addr of ED */
+	struct td		*dummy;		/* next TD to activate */
+
+	/* host's view of schedule */
+	struct ed		*ed_next;	/* on schedule or rm_list */
+	struct ed		*ed_prev;	/* for non-interrupt EDs */
+	struct list_head	td_list;	/* "shadow list" of our TDs */
+	struct list_head	in_use_list;
+
+	/* create --> IDLE --> OPER --> ... --> IDLE --> destroy
+	 * usually:  OPER --> UNLINK --> (IDLE | OPER) --> ...
+	 */
+	u8			state;		/* ED_{IDLE,UNLINK,OPER} */
+#define ED_IDLE		0x00		/* NOT linked to HC */
+#define ED_UNLINK	0x01		/* being unlinked from hc */
+#define ED_OPER		0x02		/* IS linked to hc */
+
+	u8			type;		/* PIPE_{BULK,...} */
+
+	/* periodic scheduling params (for intr and iso) */
+	u8			branch;
+	u16			interval;
+	u16			load;
+	u16			last_iso;	/* iso only */
+
+	/* HC may see EDs on rm_list until next frame (frame_no == tick) */
+	u16			tick;
+
+	/* Detect TDs not added to the done queue */
+	unsigned		takeback_wdh_cnt;
+	struct td		*pending_td;
+#define	OKAY_TO_TAKEBACK(ohci, ed)			\
+		((int) (ohci->wdh_cnt - ed->takeback_wdh_cnt) >= 0)
+
+} __attribute__ ((aligned(16)));
+
+#define ED_MASK	((u32)~0x0f)		/* strip hw status in low addr bits */
+
+
+/*
+ * OHCI Transfer Descriptor (TD) ... one per transfer segment
+ * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
+ * and 4.3.2 (iso)
+ */
+struct td {
+	/* first fields are hardware-specified */
+	__hc32		hwINFO;		/* transfer info bitmask */
+
+	/* hwINFO bits for both general and iso tds: */
+#define TD_CC       0xf0000000			/* condition code */
+#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
+//#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
+#define TD_DI       0x00E00000			/* frames before interrupt */
+#define TD_DI_SET(X) (((X) & 0x07)<< 21)
+	/* these two bits are available for definition/use by HCDs in both
+	 * general and iso tds ... others are available for only one type
+	 */
+#define TD_DONE     0x00020000			/* retired to donelist */
+#define TD_ISO      0x00010000			/* copy of ED_ISO */
+
+	/* hwINFO bits for general tds: */
+#define TD_EC       0x0C000000			/* error count */
+#define TD_T        0x03000000			/* data toggle state */
+#define TD_T_DATA0  0x02000000				/* DATA0 */
+#define TD_T_DATA1  0x03000000				/* DATA1 */
+#define TD_T_TOGGLE 0x00000000				/* uses ED_C */
+#define TD_DP       0x00180000			/* direction/pid */
+#define TD_DP_SETUP 0x00000000			/* SETUP pid */
+#define TD_DP_IN    0x00100000				/* IN pid */
+#define TD_DP_OUT   0x00080000				/* OUT pid */
+							/* 0x00180000 rsvd */
+#define TD_R        0x00040000			/* round: short packets OK? */
+
+	/* (no hwINFO #defines yet for iso tds) */
+
+	__hc32		hwCBP;		/* Current Buffer Pointer (or 0) */
+	__hc32		hwNextTD;	/* Next TD Pointer */
+	__hc32		hwBE;		/* Memory Buffer End Pointer */
+
+	/* PSW is only for ISO.  Only 1 PSW entry is used, but on
+	 * big-endian PPC hardware that's the second entry.
+	 */
+#define MAXPSW	2
+	__hc16		hwPSW [MAXPSW];
+
+	/* rest are purely for the driver's use */
+	__u8		index;
+	struct ed	*ed;
+	struct td	*td_hash;	/* dma-->td hashtable */
+	struct td	*next_dl_td;
+	struct urb	*urb;
+
+	dma_addr_t	td_dma;		/* addr of this TD */
+	dma_addr_t	data_dma;	/* addr of data it points to */
+
+	struct list_head td_list;	/* "shadow list", TDs on same ED */
+} __attribute__ ((aligned(32)));	/* c/b/i need 16; only iso needs 32 */
+
+#define TD_MASK	((u32)~0x1f)		/* strip hw status in low addr bits */
+
+/*
+ * Hardware transfer status codes -- CC from td->hwINFO or td->hwPSW
+ */
+#define TD_CC_NOERROR      0x00
+#define TD_CC_CRC          0x01
+#define TD_CC_BITSTUFFING  0x02
+#define TD_CC_DATATOGGLEM  0x03
+#define TD_CC_STALL        0x04
+#define TD_DEVNOTRESP      0x05
+#define TD_PIDCHECKFAIL    0x06
+#define TD_UNEXPECTEDPID   0x07
+#define TD_DATAOVERRUN     0x08
+#define TD_DATAUNDERRUN    0x09
+    /* 0x0A, 0x0B reserved for hardware */
+#define TD_BUFFEROVERRUN   0x0C
+#define TD_BUFFERUNDERRUN  0x0D
+    /* 0x0E, 0x0F reserved for HCD */
+#define TD_NOTACCESSED     0x0F
+
+
+/* map OHCI TD status codes (CC) to errno values */
+static const int __maybe_unused cc_to_error [16] = {
+	/* No  Error  */               0,
+	/* CRC Error  */               -EILSEQ,
+	/* Bit Stuff  */               -EPROTO,
+	/* Data Togg  */               -EILSEQ,
+	/* Stall      */               -EPIPE,
+	/* DevNotResp */               -ETIME,
+	/* PIDCheck   */               -EPROTO,
+	/* UnExpPID   */               -EPROTO,
+	/* DataOver   */               -EOVERFLOW,
+	/* DataUnder  */               -EREMOTEIO,
+	/* (for hw)   */               -EIO,
+	/* (for hw)   */               -EIO,
+	/* BufferOver */               -ECOMM,
+	/* BuffUnder  */               -ENOSR,
+	/* (for HCD)  */               -EALREADY,
+	/* (for HCD)  */               -EALREADY
+};
+
+
+/*
+ * The HCCA (Host Controller Communications Area) is a 256 byte
+ * structure defined section 4.4.1 of the OHCI spec. The HC is
+ * told the base address of it.  It must be 256-byte aligned.
+ */
+struct ohci_hcca {
+#define NUM_INTS 32
+	__hc32	int_table [NUM_INTS];	/* periodic schedule */
+
+	/*
+	 * OHCI defines u16 frame_no, followed by u16 zero pad.
+	 * Since some processors can't do 16 bit bus accesses,
+	 * portable access must be a 32 bits wide.
+	 */
+	__hc32	frame_no;		/* current frame number */
+	__hc32	done_head;		/* info returned for an interrupt */
+	u8	reserved_for_hc [116];
+	u8	what [4];		/* spec only identifies 252 bytes :) */
+} __attribute__ ((aligned(256)));
+
+/*
+ * This is the structure of the OHCI controller's memory mapped I/O region.
+ * You must use readl() and writel() (in <asm/io.h>) to access these fields!!
+ * Layout is in section 7 (and appendix B) of the spec.
+ */
+struct ohci_regs {
+	/* control and status registers (section 7.1) */
+	__hc32	revision;
+	__hc32	control;
+	__hc32	cmdstatus;
+	__hc32	intrstatus;
+	__hc32	intrenable;
+	__hc32	intrdisable;
+
+	/* memory pointers (section 7.2) */
+	__hc32	hcca;
+	__hc32	ed_periodcurrent;
+	__hc32	ed_controlhead;
+	__hc32	ed_controlcurrent;
+	__hc32	ed_bulkhead;
+	__hc32	ed_bulkcurrent;
+	__hc32	donehead;
+
+	/* frame counters (section 7.3) */
+	__hc32	fminterval;
+	__hc32	fmremaining;
+	__hc32	fmnumber;
+	__hc32	periodicstart;
+	__hc32	lsthresh;
+
+	/* Root hub ports (section 7.4) */
+	struct	ohci_roothub_regs {
+		__hc32	a;
+		__hc32	b;
+		__hc32	status;
+#define MAX_ROOT_PORTS	15	/* maximum OHCI root hub ports (RH_A_NDP) */
+		__hc32	portstatus [MAX_ROOT_PORTS];
+	} roothub;
+
+	/* and optional "legacy support" registers (appendix B) at 0x0100 */
+
+} __attribute__ ((aligned(32)));
+
+
+/* OHCI CONTROL AND STATUS REGISTER MASKS */
+
+/*
+ * HcControl (control) register masks
+ */
+#define OHCI_CTRL_CBSR	(3 << 0)	/* control/bulk service ratio */
+#define OHCI_CTRL_PLE	(1 << 2)	/* periodic list enable */
+#define OHCI_CTRL_IE	(1 << 3)	/* isochronous enable */
+#define OHCI_CTRL_CLE	(1 << 4)	/* control list enable */
+#define OHCI_CTRL_BLE	(1 << 5)	/* bulk list enable */
+#define OHCI_CTRL_HCFS	(3 << 6)	/* host controller functional state */
+#define OHCI_CTRL_IR	(1 << 8)	/* interrupt routing */
+#define OHCI_CTRL_RWC	(1 << 9)	/* remote wakeup connected */
+#define OHCI_CTRL_RWE	(1 << 10)	/* remote wakeup enable */
+
+/* pre-shifted values for HCFS */
+#	define OHCI_USB_RESET	(0 << 6)
+#	define OHCI_USB_RESUME	(1 << 6)
+#	define OHCI_USB_OPER	(2 << 6)
+#	define OHCI_USB_SUSPEND	(3 << 6)
+
+/*
+ * HcCommandStatus (cmdstatus) register masks
+ */
+#define OHCI_HCR	(1 << 0)	/* host controller reset */
+#define OHCI_CLF	(1 << 1)	/* control list filled */
+#define OHCI_BLF	(1 << 2)	/* bulk list filled */
+#define OHCI_OCR	(1 << 3)	/* ownership change request */
+#define OHCI_SOC	(3 << 16)	/* scheduling overrun count */
+
+/*
+ * masks used with interrupt registers:
+ * HcInterruptStatus (intrstatus)
+ * HcInterruptEnable (intrenable)
+ * HcInterruptDisable (intrdisable)
+ */
+#define OHCI_INTR_SO	(1 << 0)	/* scheduling overrun */
+#define OHCI_INTR_WDH	(1 << 1)	/* writeback of done_head */
+#define OHCI_INTR_SF	(1 << 2)	/* start frame */
+#define OHCI_INTR_RD	(1 << 3)	/* resume detect */
+#define OHCI_INTR_UE	(1 << 4)	/* unrecoverable error */
+#define OHCI_INTR_FNO	(1 << 5)	/* frame number overflow */
+#define OHCI_INTR_RHSC	(1 << 6)	/* root hub status change */
+#define OHCI_INTR_OC	(1 << 30)	/* ownership change */
+#define OHCI_INTR_MIE	(1 << 31)	/* master interrupt enable */
+
+
+/* OHCI ROOT HUB REGISTER MASKS */
+
+/* roothub.portstatus [i] bits */
+#define RH_PS_CCS            0x00000001		/* current connect status */
+#define RH_PS_PES            0x00000002		/* port enable status*/
+#define RH_PS_PSS            0x00000004		/* port suspend status */
+#define RH_PS_POCI           0x00000008		/* port over current indicator */
+#define RH_PS_PRS            0x00000010		/* port reset status */
+#define RH_PS_PPS            0x00000100		/* port power status */
+#define RH_PS_LSDA           0x00000200		/* low speed device attached */
+#define RH_PS_CSC            0x00010000		/* connect status change */
+#define RH_PS_PESC           0x00020000		/* port enable status change */
+#define RH_PS_PSSC           0x00040000		/* port suspend status change */
+#define RH_PS_OCIC           0x00080000		/* over current indicator change */
+#define RH_PS_PRSC           0x00100000		/* port reset status change */
+
+/* roothub.status bits */
+#define RH_HS_LPS	     0x00000001		/* local power status */
+#define RH_HS_OCI	     0x00000002		/* over current indicator */
+#define RH_HS_DRWE	     0x00008000		/* device remote wakeup enable */
+#define RH_HS_LPSC	     0x00010000		/* local power status change */
+#define RH_HS_OCIC	     0x00020000		/* over current indicator change */
+#define RH_HS_CRWE	     0x80000000		/* clear remote wakeup enable */
+
+/* roothub.b masks */
+#define RH_B_DR		0x0000ffff		/* device removable flags */
+#define RH_B_PPCM	0xffff0000		/* port power control mask */
+
+/* roothub.a masks */
+#define	RH_A_NDP	(0xff << 0)		/* number of downstream ports */
+#define	RH_A_PSM	(1 << 8)		/* power switching mode */
+#define	RH_A_NPS	(1 << 9)		/* no power switching */
+#define	RH_A_DT		(1 << 10)		/* device type (mbz) */
+#define	RH_A_OCPM	(1 << 11)		/* over current protection mode */
+#define	RH_A_NOCP	(1 << 12)		/* no over current protection */
+#define	RH_A_POTPGT	(0xff << 24)		/* power on to power good time */
+
+
+/* hcd-private per-urb state */
+typedef struct urb_priv {
+	struct ed		*ed;
+	u16			length;		// # tds in this request
+	u16			td_cnt;		// tds already serviced
+	struct list_head	pending;
+	struct td		*td[];		// all TDs in this request
+
+} urb_priv_t;
+
+#define TD_HASH_SIZE    64    /* power'o'two */
+// sizeof (struct td) ~= 64 == 2^6 ...
+#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
+
+
+/*
+ * This is the full ohci controller description
+ *
+ * Note how the "proper" USB information is just
+ * a subset of what the full implementation needs. (Linus)
+ */
+
+enum ohci_rh_state {
+	OHCI_RH_HALTED,
+	OHCI_RH_SUSPENDED,
+	OHCI_RH_RUNNING
+};
+
+struct ohci_hcd {
+	spinlock_t		lock;
+
+	/*
+	 * I/O memory used to communicate with the HC (dma-consistent)
+	 */
+	struct ohci_regs __iomem *regs;
+
+	/*
+	 * main memory used to communicate with the HC (dma-consistent).
+	 * hcd adds to schedule for a live hc any time, but removals finish
+	 * only at the start of the next frame.
+	 */
+	struct ohci_hcca	*hcca;
+	dma_addr_t		hcca_dma;
+
+	struct ed		*ed_rm_list;		/* to be removed */
+
+	struct ed		*ed_bulktail;		/* last in bulk list */
+	struct ed		*ed_controltail;	/* last in ctrl list */
+	struct ed		*periodic [NUM_INTS];	/* shadow int_table */
+
+	void (*start_hnp)(struct ohci_hcd *ohci);
+
+	/*
+	 * memory management for queue data structures
+	 *
+	 * @td_cache and @ed_cache are %NULL if &usb_hcd.localmem_pool is used.
+	 */
+	struct dma_pool		*td_cache;
+	struct dma_pool		*ed_cache;
+	struct td		*td_hash [TD_HASH_SIZE];
+	struct td		*dl_start, *dl_end;	/* the done list */
+	struct list_head	pending;
+	struct list_head	eds_in_use;	/* all EDs with at least 1 TD */
+
+	/*
+	 * driver state
+	 */
+	enum ohci_rh_state	rh_state;
+	int			num_ports;
+	int			load [NUM_INTS];
+	u32			hc_control;	/* copy of hc control reg */
+	unsigned long		next_statechange;	/* suspend/resume */
+	u32			fminterval;		/* saved register */
+	unsigned		autostop:1;	/* rh auto stopping/stopped */
+	unsigned		working:1;
+	unsigned		restart_work:1;
+
+	unsigned long		flags;		/* for HC bugs */
+#define	OHCI_QUIRK_AMD756	0x01			/* erratum #4 */
+#define	OHCI_QUIRK_SUPERIO	0x02			/* natsemi */
+#define	OHCI_QUIRK_INITRESET	0x04			/* SiS, OPTi, ... */
+#define	OHCI_QUIRK_BE_DESC	0x08			/* BE descriptors */
+#define	OHCI_QUIRK_BE_MMIO	0x10			/* BE registers */
+#define	OHCI_QUIRK_ZFMICRO	0x20			/* Compaq ZFMicro chipset*/
+#define	OHCI_QUIRK_NEC		0x40			/* lost interrupts */
+#define	OHCI_QUIRK_FRAME_NO	0x80			/* no big endian frame_no shift */
+#define	OHCI_QUIRK_HUB_POWER	0x100			/* distrust firmware power/oc setup */
+#define	OHCI_QUIRK_AMD_PLL	0x200			/* AMD PLL quirk*/
+#define	OHCI_QUIRK_AMD_PREFETCH	0x400			/* pre-fetch for ISO transfer */
+#define	OHCI_QUIRK_GLOBAL_SUSPEND	0x800		/* must suspend ports */
+#define	OHCI_QUIRK_QEMU		0x1000			/* relax timing expectations */
+
+	// there are also chip quirks/bugs in init logic
+
+	unsigned		prev_frame_no;
+	unsigned		wdh_cnt, prev_wdh_cnt;
+	u32			prev_donehead;
+	struct timer_list	io_watchdog;
+
+	struct work_struct	nec_work;	/* Worker for NEC quirk */
+
+	struct dentry		*debug_dir;
+
+	/* platform-specific data -- must come last */
+	unsigned long           priv[] __aligned(sizeof(s64));
+
+};
+
+#ifdef CONFIG_USB_PCI
+static inline int quirk_nec(struct ohci_hcd *ohci)
+{
+	return ohci->flags & OHCI_QUIRK_NEC;
+}
+static inline int quirk_zfmicro(struct ohci_hcd *ohci)
+{
+	return ohci->flags & OHCI_QUIRK_ZFMICRO;
+}
+static inline int quirk_amdiso(struct ohci_hcd *ohci)
+{
+	return ohci->flags & OHCI_QUIRK_AMD_PLL;
+}
+static inline int quirk_amdprefetch(struct ohci_hcd *ohci)
+{
+	return ohci->flags & OHCI_QUIRK_AMD_PREFETCH;
+}
+#else
+static inline int quirk_nec(struct ohci_hcd *ohci)
+{
+	return 0;
+}
+static inline int quirk_zfmicro(struct ohci_hcd *ohci)
+{
+	return 0;
+}
+static inline int quirk_amdiso(struct ohci_hcd *ohci)
+{
+	return 0;
+}
+static inline int quirk_amdprefetch(struct ohci_hcd *ohci)
+{
+	return 0;
+}
+#endif
+
+/* convert between an hcd pointer and the corresponding ohci_hcd */
+static inline struct ohci_hcd *hcd_to_ohci (struct usb_hcd *hcd)
+{
+	return (struct ohci_hcd *) (hcd->hcd_priv);
+}
+static inline struct usb_hcd *ohci_to_hcd (const struct ohci_hcd *ohci)
+{
+	return container_of ((void *) ohci, struct usb_hcd, hcd_priv);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define ohci_dbg(ohci, fmt, args...) \
+	dev_dbg (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
+#define ohci_err(ohci, fmt, args...) \
+	dev_err (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
+#define ohci_info(ohci, fmt, args...) \
+	dev_info (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
+#define ohci_warn(ohci, fmt, args...) \
+	dev_warn (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * While most USB host controllers implement their registers and
+ * in-memory communication descriptors in little-endian format,
+ * a minority (notably the IBM STB04XXX and the Motorola MPC5200
+ * processors) implement them in big endian format.
+ *
+ * In addition some more exotic implementations like the Toshiba
+ * Spider (aka SCC) cell southbridge are "mixed" endian, that is,
+ * they have a different endianness for registers vs. in-memory
+ * descriptors.
+ *
+ * This attempts to support either format at compile time without a
+ * runtime penalty, or both formats with the additional overhead
+ * of checking a flag bit.
+ *
+ * That leads to some tricky Kconfig rules howevber. There are
+ * different defaults based on some arch/ppc platforms, though
+ * the basic rules are:
+ *
+ * Controller type              Kconfig options needed
+ * ---------------              ----------------------
+ * little endian                CONFIG_USB_OHCI_LITTLE_ENDIAN
+ *
+ * fully big endian             CONFIG_USB_OHCI_BIG_ENDIAN_DESC _and_
+ *                              CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+ *
+ * mixed endian                 CONFIG_USB_OHCI_LITTLE_ENDIAN _and_
+ *                              CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC}
+ *
+ * (If you have a mixed endian controller, you -must- also define
+ * CONFIG_USB_OHCI_LITTLE_ENDIAN or things will not work when building
+ * both your mixed endian and a fully big endian controller support in
+ * the same kernel image).
+ */
+
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
+#ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN
+#define big_endian_desc(ohci)	(ohci->flags & OHCI_QUIRK_BE_DESC)
+#else
+#define big_endian_desc(ohci)	1		/* only big endian */
+#endif
+#else
+#define big_endian_desc(ohci)	0		/* only little endian */
+#endif
+
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+#ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN
+#define big_endian_mmio(ohci)	(ohci->flags & OHCI_QUIRK_BE_MMIO)
+#else
+#define big_endian_mmio(ohci)	1		/* only big endian */
+#endif
+#else
+#define big_endian_mmio(ohci)	0		/* only little endian */
+#endif
+
+/*
+ * Big-endian read/write functions are arch-specific.
+ * Other arches can be added if/when they're needed.
+ *
+ */
+static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci,
+					__hc32 __iomem * regs)
+{
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+	return big_endian_mmio(ohci) ?
+		readl_be (regs) :
+		readl (regs);
+#else
+	return readl (regs);
+#endif
+}
+
+static inline void _ohci_writel (const struct ohci_hcd *ohci,
+				 const unsigned int val, __hc32 __iomem *regs)
+{
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+	big_endian_mmio(ohci) ?
+		writel_be (val, regs) :
+		writel (val, regs);
+#else
+		writel (val, regs);
+#endif
+}
+
+#define ohci_readl(o,r)		_ohci_readl(o,r)
+#define ohci_writel(o,v,r)	_ohci_writel(o,v,r)
+
+
+/*-------------------------------------------------------------------------*/
+
+/* cpu to ohci */
+static inline __hc16 cpu_to_hc16 (const struct ohci_hcd *ohci, const u16 x)
+{
+	return big_endian_desc(ohci) ?
+		(__force __hc16)cpu_to_be16(x) :
+		(__force __hc16)cpu_to_le16(x);
+}
+
+static inline __hc16 cpu_to_hc16p (const struct ohci_hcd *ohci, const u16 *x)
+{
+	return big_endian_desc(ohci) ?
+		cpu_to_be16p(x) :
+		cpu_to_le16p(x);
+}
+
+static inline __hc32 cpu_to_hc32 (const struct ohci_hcd *ohci, const u32 x)
+{
+	return big_endian_desc(ohci) ?
+		(__force __hc32)cpu_to_be32(x) :
+		(__force __hc32)cpu_to_le32(x);
+}
+
+static inline __hc32 cpu_to_hc32p (const struct ohci_hcd *ohci, const u32 *x)
+{
+	return big_endian_desc(ohci) ?
+		cpu_to_be32p(x) :
+		cpu_to_le32p(x);
+}
+
+/* ohci to cpu */
+static inline u16 hc16_to_cpu (const struct ohci_hcd *ohci, const __hc16 x)
+{
+	return big_endian_desc(ohci) ?
+		be16_to_cpu((__force __be16)x) :
+		le16_to_cpu((__force __le16)x);
+}
+
+static inline u16 hc16_to_cpup (const struct ohci_hcd *ohci, const __hc16 *x)
+{
+	return big_endian_desc(ohci) ?
+		be16_to_cpup((__force __be16 *)x) :
+		le16_to_cpup((__force __le16 *)x);
+}
+
+static inline u32 hc32_to_cpu (const struct ohci_hcd *ohci, const __hc32 x)
+{
+	return big_endian_desc(ohci) ?
+		be32_to_cpu((__force __be32)x) :
+		le32_to_cpu((__force __le32)x);
+}
+
+static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x)
+{
+	return big_endian_desc(ohci) ?
+		be32_to_cpup((__force __be32 *)x) :
+		le32_to_cpup((__force __le32 *)x);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * The HCCA frame number is 16 bits, but is accessed as 32 bits since not all
+ * hardware handles 16 bit reads.  Depending on the SoC implementation, the
+ * frame number can wind up in either bits [31:16] (default) or
+ * [15:0] (OHCI_QUIRK_FRAME_NO) on big endian hosts.
+ *
+ * Somewhat similarly, the 16-bit PSW fields in a transfer descriptor are
+ * reordered on BE.
+ */
+
+static inline u16 ohci_frame_no(const struct ohci_hcd *ohci)
+{
+	u32 tmp;
+	if (big_endian_desc(ohci)) {
+		tmp = be32_to_cpup((__force __be32 *)&ohci->hcca->frame_no);
+		if (!(ohci->flags & OHCI_QUIRK_FRAME_NO))
+			tmp >>= 16;
+	} else
+		tmp = le32_to_cpup((__force __le32 *)&ohci->hcca->frame_no);
+
+	return (u16)tmp;
+}
+
+static inline __hc16 *ohci_hwPSWp(const struct ohci_hcd *ohci,
+                                 const struct td *td, int index)
+{
+	return (__hc16 *)(big_endian_desc(ohci) ?
+			&td->hwPSW[index ^ 1] : &td->hwPSW[index]);
+}
+
+static inline u16 ohci_hwPSW(const struct ohci_hcd *ohci,
+                               const struct td *td, int index)
+{
+	return hc16_to_cpup(ohci, ohci_hwPSWp(ohci, td, index));
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define	FI			0x2edf		/* 12000 bits per frame (-1) */
+#define	FSMP(fi)		(0x7fff & ((6 * ((fi) - 210)) / 7))
+#define	FIT			(1 << 31)
+#define LSTHRESH		0x628		/* lowspeed bit threshold */
+
+static inline void periodic_reinit (struct ohci_hcd *ohci)
+{
+	u32	fi = ohci->fminterval & 0x03fff;
+	u32	fit = ohci_readl(ohci, &ohci->regs->fminterval) & FIT;
+
+	ohci_writel (ohci, (fit ^ FIT) | ohci->fminterval,
+						&ohci->regs->fminterval);
+	ohci_writel (ohci, ((9 * fi) / 10) & 0x3fff,
+						&ohci->regs->periodicstart);
+}
+
+/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
+ * The erratum (#4) description is incorrect.  AMD's workaround waits
+ * till some bits (mostly reserved) are clear; ok for all revs.
+ */
+#define read_roothub(hc, register, mask) ({ \
+	u32 temp = ohci_readl (hc, &hc->regs->roothub.register); \
+	if (temp == -1) \
+		hc->rh_state = OHCI_RH_HALTED; \
+	else if (hc->flags & OHCI_QUIRK_AMD756) \
+		while (temp & mask) \
+			temp = ohci_readl (hc, &hc->regs->roothub.register); \
+	temp; })
+
+static inline u32 roothub_a (struct ohci_hcd *hc)
+	{ return read_roothub (hc, a, 0xfc0fe000); }
+static inline u32 roothub_b (struct ohci_hcd *hc)
+	{ return ohci_readl (hc, &hc->regs->roothub.b); }
+static inline u32 roothub_status (struct ohci_hcd *hc)
+	{ return ohci_readl (hc, &hc->regs->roothub.status); }
+static inline u32 roothub_portstatus (struct ohci_hcd *hc, int i)
+	{ return read_roothub (hc, portstatus [i], 0xffe0fce0); }
+
+/* Declarations of things exported for use by ohci platform drivers */
+
+struct ohci_driver_overrides {
+	const char	*product_desc;
+	size_t		extra_priv_size;
+	int		(*reset)(struct usb_hcd *hcd);
+};
+
+extern void	ohci_init_driver(struct hc_driver *drv,
+				const struct ohci_driver_overrides *over);
+extern int	ohci_restart(struct ohci_hcd *ohci);
+extern int	ohci_setup(struct usb_hcd *hcd);
+extern int	ohci_suspend(struct usb_hcd *hcd, bool do_wakeup);
+extern int	ohci_resume(struct usb_hcd *hcd, bool hibernated);
+extern int	ohci_hub_control(struct usb_hcd	*hcd, u16 typeReq, u16 wValue,
+				 u16 wIndex, char *buf, u16 wLength);
+extern int	ohci_hub_status_data(struct usb_hcd *hcd, char *buf);
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
new file mode 100644
index 000000000..3a441310c
--- /dev/null
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -0,0 +1,4334 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2008 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (c) 2008 Eurotech S.p.A. <info@eurtech.it>
+ *
+ * This code is *strongly* based on EHCI-HCD code by David Brownell since
+ * the chip is a quasi-EHCI compatible.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+
+#include <asm/irq.h>
+#include <asm/unaligned.h>
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+
+#define DRIVER_VERSION "0.0.50"
+
+#define OXU_DEVICEID			0x00
+	#define OXU_REV_MASK		0xffff0000
+	#define OXU_REV_SHIFT		16
+	#define OXU_REV_2100		0x2100
+	#define OXU_BO_SHIFT		8
+	#define OXU_BO_MASK		(0x3 << OXU_BO_SHIFT)
+	#define OXU_MAJ_REV_SHIFT	4
+	#define OXU_MAJ_REV_MASK	(0xf << OXU_MAJ_REV_SHIFT)
+	#define OXU_MIN_REV_SHIFT	0
+	#define OXU_MIN_REV_MASK	(0xf << OXU_MIN_REV_SHIFT)
+#define OXU_HOSTIFCONFIG		0x04
+#define OXU_SOFTRESET			0x08
+	#define OXU_SRESET		(1 << 0)
+
+#define OXU_PIOBURSTREADCTRL		0x0C
+
+#define OXU_CHIPIRQSTATUS		0x10
+#define OXU_CHIPIRQEN_SET		0x14
+#define OXU_CHIPIRQEN_CLR		0x18
+	#define OXU_USBSPHLPWUI		0x00000080
+	#define OXU_USBOTGLPWUI		0x00000040
+	#define OXU_USBSPHI		0x00000002
+	#define OXU_USBOTGI		0x00000001
+
+#define OXU_CLKCTRL_SET			0x1C
+	#define OXU_SYSCLKEN		0x00000008
+	#define OXU_USBSPHCLKEN		0x00000002
+	#define OXU_USBOTGCLKEN		0x00000001
+
+#define OXU_ASO				0x68
+	#define OXU_SPHPOEN		0x00000100
+	#define OXU_OVRCCURPUPDEN	0x00000800
+	#define OXU_ASO_OP		(1 << 10)
+	#define OXU_COMPARATOR		0x000004000
+
+#define OXU_USBMODE			0x1A8
+	#define OXU_VBPS		0x00000020
+	#define OXU_ES_LITTLE		0x00000000
+	#define OXU_CM_HOST_ONLY	0x00000003
+
+/*
+ * Proper EHCI structs & defines
+ */
+
+/* Magic numbers that can affect system performance */
+#define EHCI_TUNE_CERR		3	/* 0-3 qtd retries; 0 == don't stop */
+#define EHCI_TUNE_RL_HS		4	/* nak throttle; see 4.9 */
+#define EHCI_TUNE_RL_TT		0
+#define EHCI_TUNE_MULT_HS	1	/* 1-3 transactions/uframe; 4.10.3 */
+#define EHCI_TUNE_MULT_TT	1
+#define EHCI_TUNE_FLS		2	/* (small) 256 frame schedule */
+
+struct oxu_hcd;
+
+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
+
+/* Section 2.2 Host Controller Capability Registers */
+struct ehci_caps {
+	/* these fields are specified as 8 and 16 bit registers,
+	 * but some hosts can't perform 8 or 16 bit PCI accesses.
+	 */
+	u32		hc_capbase;
+#define HC_LENGTH(p)		(((p)>>00)&0x00ff)	/* bits 7:0 */
+#define HC_VERSION(p)		(((p)>>16)&0xffff)	/* bits 31:16 */
+	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
+#define HCS_DEBUG_PORT(p)	(((p)>>20)&0xf)	/* bits 23:20, debug port? */
+#define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */
+#define HCS_N_CC(p)		(((p)>>12)&0xf)	/* bits 15:12, #companion HCs */
+#define HCS_N_PCC(p)		(((p)>>8)&0xf)	/* bits 11:8, ports per CC */
+#define HCS_PORTROUTED(p)	((p)&(1 << 7))	/* true: port routing */
+#define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
+#define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
+
+	u32		hcc_params;      /* HCCPARAMS - offset 0x8 */
+#define HCC_EXT_CAPS(p)		(((p)>>8)&0xff)	/* for pci extended caps */
+#define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
+#define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
+#define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
+#define HCC_64BIT_ADDR(p)       ((p)&(1))       /* true: can use 64-bit addr */
+	u8		portroute[8];	 /* nibbles for routing - offset 0xC */
+} __packed;
+
+
+/* Section 2.3 Host Controller Operational Registers */
+struct ehci_regs {
+	/* USBCMD: offset 0x00 */
+	u32		command;
+/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
+#define CMD_PARK	(1<<11)		/* enable "park" on async qh */
+#define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
+#define CMD_LRESET	(1<<7)		/* partial reset (no ports, etc) */
+#define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
+#define CMD_ASE		(1<<5)		/* async schedule enable */
+#define CMD_PSE		(1<<4)		/* periodic schedule enable */
+/* 3:2 is periodic frame list size */
+#define CMD_RESET	(1<<1)		/* reset HC not bus */
+#define CMD_RUN		(1<<0)		/* start/stop HC */
+
+	/* USBSTS: offset 0x04 */
+	u32		status;
+#define STS_ASS		(1<<15)		/* Async Schedule Status */
+#define STS_PSS		(1<<14)		/* Periodic Schedule Status */
+#define STS_RECL	(1<<13)		/* Reclamation */
+#define STS_HALT	(1<<12)		/* Not running (any reason) */
+/* some bits reserved */
+	/* these STS_* flags are also intr_enable bits (USBINTR) */
+#define STS_IAA		(1<<5)		/* Interrupted on async advance */
+#define STS_FATAL	(1<<4)		/* such as some PCI access errors */
+#define STS_FLR		(1<<3)		/* frame list rolled over */
+#define STS_PCD		(1<<2)		/* port change detect */
+#define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
+#define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
+
+#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
+
+	/* USBINTR: offset 0x08 */
+	u32		intr_enable;
+
+	/* FRINDEX: offset 0x0C */
+	u32		frame_index;	/* current microframe number */
+	/* CTRLDSSEGMENT: offset 0x10 */
+	u32		segment;	/* address bits 63:32 if needed */
+	/* PERIODICLISTBASE: offset 0x14 */
+	u32		frame_list;	/* points to periodic list */
+	/* ASYNCLISTADDR: offset 0x18 */
+	u32		async_next;	/* address of next async queue head */
+
+	u32		reserved[9];
+
+	/* CONFIGFLAG: offset 0x40 */
+	u32		configured_flag;
+#define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
+
+	/* PORTSC: offset 0x44 */
+	u32		port_status[0];	/* up to N_PORTS */
+/* 31:23 reserved */
+#define PORT_WKOC_E	(1<<22)		/* wake on overcurrent (enable) */
+#define PORT_WKDISC_E	(1<<21)		/* wake on disconnect (enable) */
+#define PORT_WKCONN_E	(1<<20)		/* wake on connect (enable) */
+/* 19:16 for port testing */
+#define PORT_LED_OFF	(0<<14)
+#define PORT_LED_AMBER	(1<<14)
+#define PORT_LED_GREEN	(2<<14)
+#define PORT_LED_MASK	(3<<14)
+#define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
+#define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
+#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))	/* USB 1.1 device */
+/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
+/* 9 reserved */
+#define PORT_RESET	(1<<8)		/* reset port */
+#define PORT_SUSPEND	(1<<7)		/* suspend port */
+#define PORT_RESUME	(1<<6)		/* resume it */
+#define PORT_OCC	(1<<5)		/* over current change */
+#define PORT_OC		(1<<4)		/* over current active */
+#define PORT_PEC	(1<<3)		/* port enable change */
+#define PORT_PE		(1<<2)		/* port enable */
+#define PORT_CSC	(1<<1)		/* connect status change */
+#define PORT_CONNECT	(1<<0)		/* device connected */
+#define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
+} __packed;
+
+/* Appendix C, Debug port ... intended for use with special "debug devices"
+ * that can help if there's no serial console.  (nonstandard enumeration.)
+ */
+struct ehci_dbg_port {
+	u32	control;
+#define DBGP_OWNER	(1<<30)
+#define DBGP_ENABLED	(1<<28)
+#define DBGP_DONE	(1<<16)
+#define DBGP_INUSE	(1<<10)
+#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
+#	define DBGP_ERR_BAD	1
+#	define DBGP_ERR_SIGNAL	2
+#define DBGP_ERROR	(1<<6)
+#define DBGP_GO		(1<<5)
+#define DBGP_OUT	(1<<4)
+#define DBGP_LEN(x)	(((x)>>0)&0x0f)
+	u32	pids;
+#define DBGP_PID_GET(x)		(((x)>>16)&0xff)
+#define DBGP_PID_SET(data, tok)	(((data)<<8)|(tok))
+	u32	data03;
+	u32	data47;
+	u32	address;
+#define DBGP_EPADDR(dev, ep)	(((dev)<<8)|(ep))
+} __packed;
+
+#define	QTD_NEXT(dma)	cpu_to_le32((u32)dma)
+
+/*
+ * EHCI Specification 0.95 Section 3.5
+ * QTD: describe data transfer components (buffer, direction, ...)
+ * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
+ *
+ * These are associated only with "QH" (Queue Head) structures,
+ * used with control, bulk, and interrupt transfers.
+ */
+struct ehci_qtd {
+	/* first part defined by EHCI spec */
+	__le32			hw_next;		/* see EHCI 3.5.1 */
+	__le32			hw_alt_next;		/* see EHCI 3.5.2 */
+	__le32			hw_token;		/* see EHCI 3.5.3 */
+#define	QTD_TOGGLE	(1 << 31)	/* data toggle */
+#define	QTD_LENGTH(tok)	(((tok)>>16) & 0x7fff)
+#define	QTD_IOC		(1 << 15)	/* interrupt on complete */
+#define	QTD_CERR(tok)	(((tok)>>10) & 0x3)
+#define	QTD_PID(tok)	(((tok)>>8) & 0x3)
+#define	QTD_STS_ACTIVE	(1 << 7)	/* HC may execute this */
+#define	QTD_STS_HALT	(1 << 6)	/* halted on error */
+#define	QTD_STS_DBE	(1 << 5)	/* data buffer error (in HC) */
+#define	QTD_STS_BABBLE	(1 << 4)	/* device was babbling (qtd halted) */
+#define	QTD_STS_XACT	(1 << 3)	/* device gave illegal response */
+#define	QTD_STS_MMF	(1 << 2)	/* incomplete split transaction */
+#define	QTD_STS_STS	(1 << 1)	/* split transaction state */
+#define	QTD_STS_PING	(1 << 0)	/* issue PING? */
+	__le32			hw_buf[5];		/* see EHCI 3.5.4 */
+	__le32			hw_buf_hi[5];		/* Appendix B */
+
+	/* the rest is HCD-private */
+	dma_addr_t		qtd_dma;		/* qtd address */
+	struct list_head	qtd_list;		/* sw qtd list */
+	struct urb		*urb;			/* qtd's urb */
+	size_t			length;			/* length of buffer */
+
+	u32			qtd_buffer_len;
+	void			*buffer;
+	dma_addr_t		buffer_dma;
+	void			*transfer_buffer;
+	void			*transfer_dma;
+} __aligned(32);
+
+/* mask NakCnt+T in qh->hw_alt_next */
+#define QTD_MASK cpu_to_le32 (~0x1f)
+
+#define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)
+
+/* Type tag from {qh, itd, sitd, fstn}->hw_next */
+#define Q_NEXT_TYPE(dma) ((dma) & cpu_to_le32 (3 << 1))
+
+/* values for that type tag */
+#define Q_TYPE_QH	cpu_to_le32 (1 << 1)
+
+/* next async queue entry, or pointer to interrupt/periodic QH */
+#define	QH_NEXT(dma)	(cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH)
+
+/* for periodic/async schedules and qtd lists, mark end of list */
+#define	EHCI_LIST_END	cpu_to_le32(1) /* "null pointer" to hw */
+
+/*
+ * Entries in periodic shadow table are pointers to one of four kinds
+ * of data structure.  That's dictated by the hardware; a type tag is
+ * encoded in the low bits of the hardware's periodic schedule.  Use
+ * Q_NEXT_TYPE to get the tag.
+ *
+ * For entries in the async schedule, the type tag always says "qh".
+ */
+union ehci_shadow {
+	struct ehci_qh		*qh;		/* Q_TYPE_QH */
+	__le32			*hw_next;	/* (all types) */
+	void			*ptr;
+};
+
+/*
+ * EHCI Specification 0.95 Section 3.6
+ * QH: describes control/bulk/interrupt endpoints
+ * See Fig 3-7 "Queue Head Structure Layout".
+ *
+ * These appear in both the async and (for interrupt) periodic schedules.
+ */
+
+struct ehci_qh {
+	/* first part defined by EHCI spec */
+	__le32			hw_next;	 /* see EHCI 3.6.1 */
+	__le32			hw_info1;	/* see EHCI 3.6.2 */
+#define	QH_HEAD		0x00008000
+	__le32			hw_info2;	/* see EHCI 3.6.2 */
+#define	QH_SMASK	0x000000ff
+#define	QH_CMASK	0x0000ff00
+#define	QH_HUBADDR	0x007f0000
+#define	QH_HUBPORT	0x3f800000
+#define	QH_MULT		0xc0000000
+	__le32			hw_current;	 /* qtd list - see EHCI 3.6.4 */
+
+	/* qtd overlay (hardware parts of a struct ehci_qtd) */
+	__le32			hw_qtd_next;
+	__le32			hw_alt_next;
+	__le32			hw_token;
+	__le32			hw_buf[5];
+	__le32			hw_buf_hi[5];
+
+	/* the rest is HCD-private */
+	dma_addr_t		qh_dma;		/* address of qh */
+	union ehci_shadow	qh_next;	/* ptr to qh; or periodic */
+	struct list_head	qtd_list;	/* sw qtd list */
+	struct ehci_qtd		*dummy;
+	struct ehci_qh		*reclaim;	/* next to reclaim */
+
+	struct oxu_hcd		*oxu;
+	struct kref		kref;
+	unsigned int		stamp;
+
+	u8			qh_state;
+#define	QH_STATE_LINKED		1		/* HC sees this */
+#define	QH_STATE_UNLINK		2		/* HC may still see this */
+#define	QH_STATE_IDLE		3		/* HC doesn't see this */
+#define	QH_STATE_UNLINK_WAIT	4		/* LINKED and on reclaim q */
+#define	QH_STATE_COMPLETING	5		/* don't touch token.HALT */
+
+	/* periodic schedule info */
+	u8			usecs;		/* intr bandwidth */
+	u8			gap_uf;		/* uframes split/csplit gap */
+	u8			c_usecs;	/* ... split completion bw */
+	u16			tt_usecs;	/* tt downstream bandwidth */
+	unsigned short		period;		/* polling interval */
+	unsigned short		start;		/* where polling starts */
+#define NO_FRAME ((unsigned short)~0)			/* pick new start */
+	struct usb_device	*dev;		/* access to TT */
+} __aligned(32);
+
+/*
+ * Proper OXU210HP structs
+ */
+
+#define OXU_OTG_CORE_OFFSET	0x00400
+#define OXU_OTG_CAP_OFFSET	(OXU_OTG_CORE_OFFSET + 0x100)
+#define OXU_SPH_CORE_OFFSET	0x00800
+#define OXU_SPH_CAP_OFFSET	(OXU_SPH_CORE_OFFSET + 0x100)
+
+#define OXU_OTG_MEM		0xE000
+#define OXU_SPH_MEM		0x16000
+
+/* Only how many elements & element structure are specifies here. */
+/* 2 host controllers are enabled - total size <= 28 kbytes */
+#define	DEFAULT_I_TDPS		1024
+#define QHEAD_NUM		16
+#define QTD_NUM			32
+#define SITD_NUM		8
+#define MURB_NUM		8
+
+#define BUFFER_NUM		8
+#define BUFFER_SIZE		512
+
+struct oxu_info {
+	struct usb_hcd *hcd[2];
+};
+
+struct oxu_buf {
+	u8			buffer[BUFFER_SIZE];
+} __aligned(BUFFER_SIZE);
+
+struct oxu_onchip_mem {
+	struct oxu_buf		db_pool[BUFFER_NUM];
+
+	u32			frame_list[DEFAULT_I_TDPS];
+	struct ehci_qh		qh_pool[QHEAD_NUM];
+	struct ehci_qtd		qtd_pool[QTD_NUM];
+} __aligned(4 << 10);
+
+#define	EHCI_MAX_ROOT_PORTS	15		/* see HCS_N_PORTS */
+
+struct oxu_murb {
+	struct urb		urb;
+	struct urb		*main;
+	u8			last;
+};
+
+struct oxu_hcd {				/* one per controller */
+	unsigned int		is_otg:1;
+
+	u8			qh_used[QHEAD_NUM];
+	u8			qtd_used[QTD_NUM];
+	u8			db_used[BUFFER_NUM];
+	u8			murb_used[MURB_NUM];
+
+	struct oxu_onchip_mem	__iomem *mem;
+	spinlock_t		mem_lock;
+
+	struct timer_list	urb_timer;
+
+	struct ehci_caps __iomem *caps;
+	struct ehci_regs __iomem *regs;
+
+	u32			hcs_params;	/* cached register copy */
+	spinlock_t		lock;
+
+	/* async schedule support */
+	struct ehci_qh		*async;
+	struct ehci_qh		*reclaim;
+	unsigned int		reclaim_ready:1;
+	unsigned int		scanning:1;
+
+	/* periodic schedule support */
+	unsigned int		periodic_size;
+	__le32			*periodic;	/* hw periodic table */
+	dma_addr_t		periodic_dma;
+	unsigned int		i_thresh;	/* uframes HC might cache */
+
+	union ehci_shadow	*pshadow;	/* mirror hw periodic table */
+	int			next_uframe;	/* scan periodic, start here */
+	unsigned int		periodic_sched;	/* periodic activity count */
+
+	/* per root hub port */
+	unsigned long		reset_done[EHCI_MAX_ROOT_PORTS];
+	/* bit vectors (one bit per port) */
+	unsigned long		bus_suspended;	/* which ports were
+						 * already suspended at the
+						 * start of a bus suspend
+						 */
+	unsigned long		companion_ports;/* which ports are dedicated
+						 * to the companion controller
+						 */
+
+	struct timer_list	watchdog;
+	unsigned long		actions;
+	unsigned int		stamp;
+	unsigned long		next_statechange;
+	u32			command;
+
+	/* SILICON QUIRKS */
+	struct list_head	urb_list;	/* this is the head to urb
+						 * queue that didn't get enough
+						 * resources
+						 */
+	struct oxu_murb		*murb_pool;	/* murb per split big urb */
+	unsigned int		urb_len;
+
+	u8			sbrn;		/* packed release number */
+};
+
+#define EHCI_IAA_JIFFIES	(HZ/100)	/* arbitrary; ~10 msec */
+#define EHCI_IO_JIFFIES		(HZ/10)		/* io watchdog > irq_thresh */
+#define EHCI_ASYNC_JIFFIES      (HZ/20)		/* async idle timeout */
+#define EHCI_SHRINK_JIFFIES     (HZ/200)	/* async qh unlink delay */
+
+enum ehci_timer_action {
+	TIMER_IO_WATCHDOG,
+	TIMER_IAA_WATCHDOG,
+	TIMER_ASYNC_SHRINK,
+	TIMER_ASYNC_OFF,
+};
+
+/*
+ * Main defines
+ */
+
+#define oxu_dbg(oxu, fmt, args...) \
+		dev_dbg(oxu_to_hcd(oxu)->self.controller , fmt , ## args)
+#define oxu_err(oxu, fmt, args...) \
+		dev_err(oxu_to_hcd(oxu)->self.controller , fmt , ## args)
+#define oxu_info(oxu, fmt, args...) \
+		dev_info(oxu_to_hcd(oxu)->self.controller , fmt , ## args)
+
+#ifdef CONFIG_DYNAMIC_DEBUG
+#define DEBUG
+#endif
+
+static inline struct usb_hcd *oxu_to_hcd(struct oxu_hcd *oxu)
+{
+	return container_of((void *) oxu, struct usb_hcd, hcd_priv);
+}
+
+static inline struct oxu_hcd *hcd_to_oxu(struct usb_hcd *hcd)
+{
+	return (struct oxu_hcd *) (hcd->hcd_priv);
+}
+
+/*
+ * Debug stuff
+ */
+
+#undef OXU_URB_TRACE
+#undef OXU_VERBOSE_DEBUG
+
+#ifdef OXU_VERBOSE_DEBUG
+#define oxu_vdbg			oxu_dbg
+#else
+#define oxu_vdbg(oxu, fmt, args...)	/* Nop */
+#endif
+
+#ifdef DEBUG
+
+static int __attribute__((__unused__))
+dbg_status_buf(char *buf, unsigned len, const char *label, u32 status)
+{
+	return scnprintf(buf, len, "%s%sstatus %04x%s%s%s%s%s%s%s%s%s%s",
+		label, label[0] ? " " : "", status,
+		(status & STS_ASS) ? " Async" : "",
+		(status & STS_PSS) ? " Periodic" : "",
+		(status & STS_RECL) ? " Recl" : "",
+		(status & STS_HALT) ? " Halt" : "",
+		(status & STS_IAA) ? " IAA" : "",
+		(status & STS_FATAL) ? " FATAL" : "",
+		(status & STS_FLR) ? " FLR" : "",
+		(status & STS_PCD) ? " PCD" : "",
+		(status & STS_ERR) ? " ERR" : "",
+		(status & STS_INT) ? " INT" : ""
+		);
+}
+
+static int __attribute__((__unused__))
+dbg_intr_buf(char *buf, unsigned len, const char *label, u32 enable)
+{
+	return scnprintf(buf, len, "%s%sintrenable %02x%s%s%s%s%s%s",
+		label, label[0] ? " " : "", enable,
+		(enable & STS_IAA) ? " IAA" : "",
+		(enable & STS_FATAL) ? " FATAL" : "",
+		(enable & STS_FLR) ? " FLR" : "",
+		(enable & STS_PCD) ? " PCD" : "",
+		(enable & STS_ERR) ? " ERR" : "",
+		(enable & STS_INT) ? " INT" : ""
+		);
+}
+
+static const char *const fls_strings[] =
+    { "1024", "512", "256", "??" };
+
+static int dbg_command_buf(char *buf, unsigned len,
+				const char *label, u32 command)
+{
+	return scnprintf(buf, len,
+		"%s%scommand %06x %s=%d ithresh=%d%s%s%s%s period=%s%s %s",
+		label, label[0] ? " " : "", command,
+		(command & CMD_PARK) ? "park" : "(park)",
+		CMD_PARK_CNT(command),
+		(command >> 16) & 0x3f,
+		(command & CMD_LRESET) ? " LReset" : "",
+		(command & CMD_IAAD) ? " IAAD" : "",
+		(command & CMD_ASE) ? " Async" : "",
+		(command & CMD_PSE) ? " Periodic" : "",
+		fls_strings[(command >> 2) & 0x3],
+		(command & CMD_RESET) ? " Reset" : "",
+		(command & CMD_RUN) ? "RUN" : "HALT"
+		);
+}
+
+static int dbg_port_buf(char *buf, unsigned len, const char *label,
+				int port, u32 status)
+{
+	char	*sig;
+
+	/* signaling state */
+	switch (status & (3 << 10)) {
+	case 0 << 10:
+		sig = "se0";
+		break;
+	case 1 << 10:
+		sig = "k";	/* low speed */
+		break;
+	case 2 << 10:
+		sig = "j";
+		break;
+	default:
+		sig = "?";
+		break;
+	}
+
+	return scnprintf(buf, len,
+		"%s%sport %d status %06x%s%s sig=%s%s%s%s%s%s%s%s%s%s",
+		label, label[0] ? " " : "", port, status,
+		(status & PORT_POWER) ? " POWER" : "",
+		(status & PORT_OWNER) ? " OWNER" : "",
+		sig,
+		(status & PORT_RESET) ? " RESET" : "",
+		(status & PORT_SUSPEND) ? " SUSPEND" : "",
+		(status & PORT_RESUME) ? " RESUME" : "",
+		(status & PORT_OCC) ? " OCC" : "",
+		(status & PORT_OC) ? " OC" : "",
+		(status & PORT_PEC) ? " PEC" : "",
+		(status & PORT_PE) ? " PE" : "",
+		(status & PORT_CSC) ? " CSC" : "",
+		(status & PORT_CONNECT) ? " CONNECT" : ""
+	    );
+}
+
+#else
+
+static inline int __attribute__((__unused__))
+dbg_status_buf(char *buf, unsigned len, const char *label, u32 status)
+{ return 0; }
+
+static inline int __attribute__((__unused__))
+dbg_command_buf(char *buf, unsigned len, const char *label, u32 command)
+{ return 0; }
+
+static inline int __attribute__((__unused__))
+dbg_intr_buf(char *buf, unsigned len, const char *label, u32 enable)
+{ return 0; }
+
+static inline int __attribute__((__unused__))
+dbg_port_buf(char *buf, unsigned len, const char *label, int port, u32 status)
+{ return 0; }
+
+#endif /* DEBUG */
+
+/* functions have the "wrong" filename when they're output... */
+#define dbg_status(oxu, label, status) { \
+	char _buf[80]; \
+	dbg_status_buf(_buf, sizeof _buf, label, status); \
+	oxu_dbg(oxu, "%s\n", _buf); \
+}
+
+#define dbg_cmd(oxu, label, command) { \
+	char _buf[80]; \
+	dbg_command_buf(_buf, sizeof _buf, label, command); \
+	oxu_dbg(oxu, "%s\n", _buf); \
+}
+
+#define dbg_port(oxu, label, port, status) { \
+	char _buf[80]; \
+	dbg_port_buf(_buf, sizeof _buf, label, port, status); \
+	oxu_dbg(oxu, "%s\n", _buf); \
+}
+
+/*
+ * Module parameters
+ */
+
+/* Initial IRQ latency: faster than hw default */
+static int log2_irq_thresh;			/* 0 to 6 */
+module_param(log2_irq_thresh, int, S_IRUGO);
+MODULE_PARM_DESC(log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
+
+/* Initial park setting: slower than hw default */
+static unsigned park;
+module_param(park, uint, S_IRUGO);
+MODULE_PARM_DESC(park, "park setting; 1-3 back-to-back async packets");
+
+/* For flakey hardware, ignore overcurrent indicators */
+static bool ignore_oc;
+module_param(ignore_oc, bool, S_IRUGO);
+MODULE_PARM_DESC(ignore_oc, "ignore bogus hardware overcurrent indications");
+
+
+static void ehci_work(struct oxu_hcd *oxu);
+static int oxu_hub_control(struct usb_hcd *hcd,
+				u16 typeReq, u16 wValue, u16 wIndex,
+				char *buf, u16 wLength);
+
+/*
+ * Local functions
+ */
+
+/* Low level read/write registers functions */
+static inline u32 oxu_readl(void __iomem *base, u32 reg)
+{
+	return readl(base + reg);
+}
+
+static inline void oxu_writel(void __iomem *base, u32 reg, u32 val)
+{
+	writel(val, base + reg);
+}
+
+static inline void timer_action_done(struct oxu_hcd *oxu,
+					enum ehci_timer_action action)
+{
+	clear_bit(action, &oxu->actions);
+}
+
+static inline void timer_action(struct oxu_hcd *oxu,
+					enum ehci_timer_action action)
+{
+	if (!test_and_set_bit(action, &oxu->actions)) {
+		unsigned long t;
+
+		switch (action) {
+		case TIMER_IAA_WATCHDOG:
+			t = EHCI_IAA_JIFFIES;
+			break;
+		case TIMER_IO_WATCHDOG:
+			t = EHCI_IO_JIFFIES;
+			break;
+		case TIMER_ASYNC_OFF:
+			t = EHCI_ASYNC_JIFFIES;
+			break;
+		case TIMER_ASYNC_SHRINK:
+		default:
+			t = EHCI_SHRINK_JIFFIES;
+			break;
+		}
+		t += jiffies;
+		/* all timings except IAA watchdog can be overridden.
+		 * async queue SHRINK often precedes IAA.  while it's ready
+		 * to go OFF neither can matter, and afterwards the IO
+		 * watchdog stops unless there's still periodic traffic.
+		 */
+		if (action != TIMER_IAA_WATCHDOG
+				&& t > oxu->watchdog.expires
+				&& timer_pending(&oxu->watchdog))
+			return;
+		mod_timer(&oxu->watchdog, t);
+	}
+}
+
+/*
+ * handshake - spin reading hc until handshake completes or fails
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @usec: timeout in microseconds
+ *
+ * Returns negative errno, or zero on success
+ *
+ * Success happens when the "mask" bits have the specified value (hardware
+ * handshake done).  There are two failure modes:  "usec" have passed (major
+ * hardware flakeout), or the register reads as all-ones (hardware removed).
+ *
+ * That last failure should_only happen in cases like physical cardbus eject
+ * before driver shutdown. But it also seems to be caused by bugs in cardbus
+ * bridge shutdown:  shutting down the bridge before the devices using it.
+ */
+static int handshake(struct oxu_hcd *oxu, void __iomem *ptr,
+					u32 mask, u32 done, int usec)
+{
+	u32 result;
+	int ret;
+
+	ret = readl_poll_timeout_atomic(ptr, result,
+					((result & mask) == done ||
+					 result == U32_MAX),
+					1, usec);
+	if (result == U32_MAX)		/* card removed */
+		return -ENODEV;
+
+	return ret;
+}
+
+/* Force HC to halt state from unknown (EHCI spec section 2.3) */
+static int ehci_halt(struct oxu_hcd *oxu)
+{
+	u32	temp = readl(&oxu->regs->status);
+
+	/* disable any irqs left enabled by previous code */
+	writel(0, &oxu->regs->intr_enable);
+
+	if ((temp & STS_HALT) != 0)
+		return 0;
+
+	temp = readl(&oxu->regs->command);
+	temp &= ~CMD_RUN;
+	writel(temp, &oxu->regs->command);
+	return handshake(oxu, &oxu->regs->status,
+			  STS_HALT, STS_HALT, 16 * 125);
+}
+
+/* Put TDI/ARC silicon into EHCI mode */
+static void tdi_reset(struct oxu_hcd *oxu)
+{
+	u32 __iomem *reg_ptr;
+	u32 tmp;
+
+	reg_ptr = (u32 __iomem *)(((u8 __iomem *)oxu->regs) + 0x68);
+	tmp = readl(reg_ptr);
+	tmp |= 0x3;
+	writel(tmp, reg_ptr);
+}
+
+/* Reset a non-running (STS_HALT == 1) controller */
+static int ehci_reset(struct oxu_hcd *oxu)
+{
+	int	retval;
+	u32	command = readl(&oxu->regs->command);
+
+	command |= CMD_RESET;
+	dbg_cmd(oxu, "reset", command);
+	writel(command, &oxu->regs->command);
+	oxu_to_hcd(oxu)->state = HC_STATE_HALT;
+	oxu->next_statechange = jiffies;
+	retval = handshake(oxu, &oxu->regs->command,
+			    CMD_RESET, 0, 250 * 1000);
+
+	if (retval)
+		return retval;
+
+	tdi_reset(oxu);
+
+	return retval;
+}
+
+/* Idle the controller (from running) */
+static void ehci_quiesce(struct oxu_hcd *oxu)
+{
+	u32	temp;
+
+#ifdef DEBUG
+	BUG_ON(!HC_IS_RUNNING(oxu_to_hcd(oxu)->state));
+#endif
+
+	/* wait for any schedule enables/disables to take effect */
+	temp = readl(&oxu->regs->command) << 10;
+	temp &= STS_ASS | STS_PSS;
+	if (handshake(oxu, &oxu->regs->status, STS_ASS | STS_PSS,
+				temp, 16 * 125) != 0) {
+		oxu_to_hcd(oxu)->state = HC_STATE_HALT;
+		return;
+	}
+
+	/* then disable anything that's still active */
+	temp = readl(&oxu->regs->command);
+	temp &= ~(CMD_ASE | CMD_IAAD | CMD_PSE);
+	writel(temp, &oxu->regs->command);
+
+	/* hardware can take 16 microframes to turn off ... */
+	if (handshake(oxu, &oxu->regs->status, STS_ASS | STS_PSS,
+				0, 16 * 125) != 0) {
+		oxu_to_hcd(oxu)->state = HC_STATE_HALT;
+		return;
+	}
+}
+
+static int check_reset_complete(struct oxu_hcd *oxu, int index,
+				u32 __iomem *status_reg, int port_status)
+{
+	if (!(port_status & PORT_CONNECT)) {
+		oxu->reset_done[index] = 0;
+		return port_status;
+	}
+
+	/* if reset finished and it's still not enabled -- handoff */
+	if (!(port_status & PORT_PE)) {
+		oxu_dbg(oxu, "Failed to enable port %d on root hub TT\n",
+				index+1);
+		return port_status;
+	} else
+		oxu_dbg(oxu, "port %d high speed\n", index + 1);
+
+	return port_status;
+}
+
+static void ehci_hub_descriptor(struct oxu_hcd *oxu,
+				struct usb_hub_descriptor *desc)
+{
+	int ports = HCS_N_PORTS(oxu->hcs_params);
+	u16 temp;
+
+	desc->bDescriptorType = USB_DT_HUB;
+	desc->bPwrOn2PwrGood = 10;	/* oxu 1.0, 2.3.9 says 20ms max */
+	desc->bHubContrCurrent = 0;
+
+	desc->bNbrPorts = ports;
+	temp = 1 + (ports / 8);
+	desc->bDescLength = 7 + 2 * temp;
+
+	/* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+	memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
+	memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
+
+	temp = HUB_CHAR_INDV_PORT_OCPM;	/* per-port overcurrent reporting */
+	if (HCS_PPC(oxu->hcs_params))
+		temp |= HUB_CHAR_INDV_PORT_LPSM; /* per-port power control */
+	else
+		temp |= HUB_CHAR_NO_LPSM; /* no power switching */
+	desc->wHubCharacteristics = (__force __u16)cpu_to_le16(temp);
+}
+
+
+/* Allocate an OXU210HP on-chip memory data buffer
+ *
+ * An on-chip memory data buffer is required for each OXU210HP USB transfer.
+ * Each transfer descriptor has one or more on-chip memory data buffers.
+ *
+ * Data buffers are allocated from a fix sized pool of data blocks.
+ * To minimise fragmentation and give reasonable memory utlisation,
+ * data buffers are allocated with sizes the power of 2 multiples of
+ * the block size, starting on an address a multiple of the allocated size.
+ *
+ * FIXME: callers of this function require a buffer to be allocated for
+ * len=0. This is a waste of on-chip memory and should be fix. Then this
+ * function should be changed to not allocate a buffer for len=0.
+ */
+static int oxu_buf_alloc(struct oxu_hcd *oxu, struct ehci_qtd *qtd, int len)
+{
+	int n_blocks;	/* minium blocks needed to hold len */
+	int a_blocks;	/* blocks allocated */
+	int i, j;
+
+	/* Don't allocte bigger than supported */
+	if (len > BUFFER_SIZE * BUFFER_NUM) {
+		oxu_err(oxu, "buffer too big (%d)\n", len);
+		return -ENOMEM;
+	}
+
+	spin_lock(&oxu->mem_lock);
+
+	/* Number of blocks needed to hold len */
+	n_blocks = (len + BUFFER_SIZE - 1) / BUFFER_SIZE;
+
+	/* Round the number of blocks up to the power of 2 */
+	for (a_blocks = 1; a_blocks < n_blocks; a_blocks <<= 1)
+		;
+
+	/* Find a suitable available data buffer */
+	for (i = 0; i < BUFFER_NUM;
+			i += max(a_blocks, (int)oxu->db_used[i])) {
+
+		/* Check all the required blocks are available */
+		for (j = 0; j < a_blocks; j++)
+			if (oxu->db_used[i + j])
+				break;
+
+		if (j != a_blocks)
+			continue;
+
+		/* Allocate blocks found! */
+		qtd->buffer = (void *) &oxu->mem->db_pool[i];
+		qtd->buffer_dma = virt_to_phys(qtd->buffer);
+
+		qtd->qtd_buffer_len = BUFFER_SIZE * a_blocks;
+		oxu->db_used[i] = a_blocks;
+
+		spin_unlock(&oxu->mem_lock);
+
+		return 0;
+	}
+
+	/* Failed */
+
+	spin_unlock(&oxu->mem_lock);
+
+	return -ENOMEM;
+}
+
+static void oxu_buf_free(struct oxu_hcd *oxu, struct ehci_qtd *qtd)
+{
+	int index;
+
+	spin_lock(&oxu->mem_lock);
+
+	index = (qtd->buffer - (void *) &oxu->mem->db_pool[0])
+							 / BUFFER_SIZE;
+	oxu->db_used[index] = 0;
+	qtd->qtd_buffer_len = 0;
+	qtd->buffer_dma = 0;
+	qtd->buffer = NULL;
+
+	spin_unlock(&oxu->mem_lock);
+}
+
+static inline void ehci_qtd_init(struct ehci_qtd *qtd, dma_addr_t dma)
+{
+	memset(qtd, 0, sizeof *qtd);
+	qtd->qtd_dma = dma;
+	qtd->hw_token = cpu_to_le32(QTD_STS_HALT);
+	qtd->hw_next = EHCI_LIST_END;
+	qtd->hw_alt_next = EHCI_LIST_END;
+	INIT_LIST_HEAD(&qtd->qtd_list);
+}
+
+static inline void oxu_qtd_free(struct oxu_hcd *oxu, struct ehci_qtd *qtd)
+{
+	int index;
+
+	if (qtd->buffer)
+		oxu_buf_free(oxu, qtd);
+
+	spin_lock(&oxu->mem_lock);
+
+	index = qtd - &oxu->mem->qtd_pool[0];
+	oxu->qtd_used[index] = 0;
+
+	spin_unlock(&oxu->mem_lock);
+}
+
+static struct ehci_qtd *ehci_qtd_alloc(struct oxu_hcd *oxu)
+{
+	int i;
+	struct ehci_qtd *qtd = NULL;
+
+	spin_lock(&oxu->mem_lock);
+
+	for (i = 0; i < QTD_NUM; i++)
+		if (!oxu->qtd_used[i])
+			break;
+
+	if (i < QTD_NUM) {
+		qtd = (struct ehci_qtd *) &oxu->mem->qtd_pool[i];
+		memset(qtd, 0, sizeof *qtd);
+
+		qtd->hw_token = cpu_to_le32(QTD_STS_HALT);
+		qtd->hw_next = EHCI_LIST_END;
+		qtd->hw_alt_next = EHCI_LIST_END;
+		INIT_LIST_HEAD(&qtd->qtd_list);
+
+		qtd->qtd_dma = virt_to_phys(qtd);
+
+		oxu->qtd_used[i] = 1;
+	}
+
+	spin_unlock(&oxu->mem_lock);
+
+	return qtd;
+}
+
+static void oxu_qh_free(struct oxu_hcd *oxu, struct ehci_qh *qh)
+{
+	int index;
+
+	spin_lock(&oxu->mem_lock);
+
+	index = qh - &oxu->mem->qh_pool[0];
+	oxu->qh_used[index] = 0;
+
+	spin_unlock(&oxu->mem_lock);
+}
+
+static void qh_destroy(struct kref *kref)
+{
+	struct ehci_qh *qh = container_of(kref, struct ehci_qh, kref);
+	struct oxu_hcd *oxu = qh->oxu;
+
+	/* clean qtds first, and know this is not linked */
+	if (!list_empty(&qh->qtd_list) || qh->qh_next.ptr) {
+		oxu_dbg(oxu, "unused qh not empty!\n");
+		BUG();
+	}
+	if (qh->dummy)
+		oxu_qtd_free(oxu, qh->dummy);
+	oxu_qh_free(oxu, qh);
+}
+
+static struct ehci_qh *oxu_qh_alloc(struct oxu_hcd *oxu)
+{
+	int i;
+	struct ehci_qh *qh = NULL;
+
+	spin_lock(&oxu->mem_lock);
+
+	for (i = 0; i < QHEAD_NUM; i++)
+		if (!oxu->qh_used[i])
+			break;
+
+	if (i < QHEAD_NUM) {
+		qh = (struct ehci_qh *) &oxu->mem->qh_pool[i];
+		memset(qh, 0, sizeof *qh);
+
+		kref_init(&qh->kref);
+		qh->oxu = oxu;
+		qh->qh_dma = virt_to_phys(qh);
+		INIT_LIST_HEAD(&qh->qtd_list);
+
+		/* dummy td enables safe urb queuing */
+		qh->dummy = ehci_qtd_alloc(oxu);
+		if (qh->dummy == NULL) {
+			oxu_dbg(oxu, "no dummy td\n");
+			oxu->qh_used[i] = 0;
+			qh = NULL;
+			goto unlock;
+		}
+
+		oxu->qh_used[i] = 1;
+	}
+unlock:
+	spin_unlock(&oxu->mem_lock);
+
+	return qh;
+}
+
+/* to share a qh (cpu threads, or hc) */
+static inline struct ehci_qh *qh_get(struct ehci_qh *qh)
+{
+	kref_get(&qh->kref);
+	return qh;
+}
+
+static inline void qh_put(struct ehci_qh *qh)
+{
+	kref_put(&qh->kref, qh_destroy);
+}
+
+static void oxu_murb_free(struct oxu_hcd *oxu, struct oxu_murb *murb)
+{
+	int index;
+
+	spin_lock(&oxu->mem_lock);
+
+	index = murb - &oxu->murb_pool[0];
+	oxu->murb_used[index] = 0;
+
+	spin_unlock(&oxu->mem_lock);
+}
+
+static struct oxu_murb *oxu_murb_alloc(struct oxu_hcd *oxu)
+
+{
+	int i;
+	struct oxu_murb *murb = NULL;
+
+	spin_lock(&oxu->mem_lock);
+
+	for (i = 0; i < MURB_NUM; i++)
+		if (!oxu->murb_used[i])
+			break;
+
+	if (i < MURB_NUM) {
+		murb = &(oxu->murb_pool)[i];
+
+		oxu->murb_used[i] = 1;
+	}
+
+	spin_unlock(&oxu->mem_lock);
+
+	return murb;
+}
+
+/* The queue heads and transfer descriptors are managed from pools tied
+ * to each of the "per device" structures.
+ * This is the initialisation and cleanup code.
+ */
+static void ehci_mem_cleanup(struct oxu_hcd *oxu)
+{
+	kfree(oxu->murb_pool);
+	oxu->murb_pool = NULL;
+
+	if (oxu->async)
+		qh_put(oxu->async);
+	oxu->async = NULL;
+
+	del_timer(&oxu->urb_timer);
+
+	oxu->periodic = NULL;
+
+	/* shadow periodic table */
+	kfree(oxu->pshadow);
+	oxu->pshadow = NULL;
+}
+
+/* Remember to add cleanup code (above) if you add anything here.
+ */
+static int ehci_mem_init(struct oxu_hcd *oxu, gfp_t flags)
+{
+	int i;
+
+	for (i = 0; i < oxu->periodic_size; i++)
+		oxu->mem->frame_list[i] = EHCI_LIST_END;
+	for (i = 0; i < QHEAD_NUM; i++)
+		oxu->qh_used[i] = 0;
+	for (i = 0; i < QTD_NUM; i++)
+		oxu->qtd_used[i] = 0;
+
+	oxu->murb_pool = kcalloc(MURB_NUM, sizeof(struct oxu_murb), flags);
+	if (!oxu->murb_pool)
+		goto fail;
+
+	for (i = 0; i < MURB_NUM; i++)
+		oxu->murb_used[i] = 0;
+
+	oxu->async = oxu_qh_alloc(oxu);
+	if (!oxu->async)
+		goto fail;
+
+	oxu->periodic = (__le32 *) &oxu->mem->frame_list;
+	oxu->periodic_dma = virt_to_phys(oxu->periodic);
+
+	for (i = 0; i < oxu->periodic_size; i++)
+		oxu->periodic[i] = EHCI_LIST_END;
+
+	/* software shadow of hardware table */
+	oxu->pshadow = kcalloc(oxu->periodic_size, sizeof(void *), flags);
+	if (oxu->pshadow != NULL)
+		return 0;
+
+fail:
+	oxu_dbg(oxu, "couldn't init memory\n");
+	ehci_mem_cleanup(oxu);
+	return -ENOMEM;
+}
+
+/* Fill a qtd, returning how much of the buffer we were able to queue up.
+ */
+static int qtd_fill(struct ehci_qtd *qtd, dma_addr_t buf, size_t len,
+				int token, int maxpacket)
+{
+	int i, count;
+	u64 addr = buf;
+
+	/* one buffer entry per 4K ... first might be short or unaligned */
+	qtd->hw_buf[0] = cpu_to_le32((u32)addr);
+	qtd->hw_buf_hi[0] = cpu_to_le32((u32)(addr >> 32));
+	count = 0x1000 - (buf & 0x0fff);	/* rest of that page */
+	if (likely(len < count))		/* ... iff needed */
+		count = len;
+	else {
+		buf +=  0x1000;
+		buf &= ~0x0fff;
+
+		/* per-qtd limit: from 16K to 20K (best alignment) */
+		for (i = 1; count < len && i < 5; i++) {
+			addr = buf;
+			qtd->hw_buf[i] = cpu_to_le32((u32)addr);
+			qtd->hw_buf_hi[i] = cpu_to_le32((u32)(addr >> 32));
+			buf += 0x1000;
+			if ((count + 0x1000) < len)
+				count += 0x1000;
+			else
+				count = len;
+		}
+
+		/* short packets may only terminate transfers */
+		if (count != len)
+			count -= (count % maxpacket);
+	}
+	qtd->hw_token = cpu_to_le32((count << 16) | token);
+	qtd->length = count;
+
+	return count;
+}
+
+static inline void qh_update(struct oxu_hcd *oxu,
+				struct ehci_qh *qh, struct ehci_qtd *qtd)
+{
+	/* writes to an active overlay are unsafe */
+	BUG_ON(qh->qh_state != QH_STATE_IDLE);
+
+	qh->hw_qtd_next = QTD_NEXT(qtd->qtd_dma);
+	qh->hw_alt_next = EHCI_LIST_END;
+
+	/* Except for control endpoints, we make hardware maintain data
+	 * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
+	 * and set the pseudo-toggle in udev. Only usb_clear_halt() will
+	 * ever clear it.
+	 */
+	if (!(qh->hw_info1 & cpu_to_le32(1 << 14))) {
+		unsigned	is_out, epnum;
+
+		is_out = !(qtd->hw_token & cpu_to_le32(1 << 8));
+		epnum = (le32_to_cpup(&qh->hw_info1) >> 8) & 0x0f;
+		if (unlikely(!usb_gettoggle(qh->dev, epnum, is_out))) {
+			qh->hw_token &= ~cpu_to_le32(QTD_TOGGLE);
+			usb_settoggle(qh->dev, epnum, is_out, 1);
+		}
+	}
+
+	/* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
+	wmb();
+	qh->hw_token &= cpu_to_le32(QTD_TOGGLE | QTD_STS_PING);
+}
+
+/* If it weren't for a common silicon quirk (writing the dummy into the qh
+ * overlay, so qh->hw_token wrongly becomes inactive/halted), only fault
+ * recovery (including urb dequeue) would need software changes to a QH...
+ */
+static void qh_refresh(struct oxu_hcd *oxu, struct ehci_qh *qh)
+{
+	struct ehci_qtd *qtd;
+
+	if (list_empty(&qh->qtd_list))
+		qtd = qh->dummy;
+	else {
+		qtd = list_entry(qh->qtd_list.next,
+				struct ehci_qtd, qtd_list);
+		/* first qtd may already be partially processed */
+		if (cpu_to_le32(qtd->qtd_dma) == qh->hw_current)
+			qtd = NULL;
+	}
+
+	if (qtd)
+		qh_update(oxu, qh, qtd);
+}
+
+static void qtd_copy_status(struct oxu_hcd *oxu, struct urb *urb,
+				size_t length, u32 token)
+{
+	/* count IN/OUT bytes, not SETUP (even short packets) */
+	if (likely(QTD_PID(token) != 2))
+		urb->actual_length += length - QTD_LENGTH(token);
+
+	/* don't modify error codes */
+	if (unlikely(urb->status != -EINPROGRESS))
+		return;
+
+	/* force cleanup after short read; not always an error */
+	if (unlikely(IS_SHORT_READ(token)))
+		urb->status = -EREMOTEIO;
+
+	/* serious "can't proceed" faults reported by the hardware */
+	if (token & QTD_STS_HALT) {
+		if (token & QTD_STS_BABBLE) {
+			/* FIXME "must" disable babbling device's port too */
+			urb->status = -EOVERFLOW;
+		} else if (token & QTD_STS_MMF) {
+			/* fs/ls interrupt xfer missed the complete-split */
+			urb->status = -EPROTO;
+		} else if (token & QTD_STS_DBE) {
+			urb->status = (QTD_PID(token) == 1) /* IN ? */
+				? -ENOSR  /* hc couldn't read data */
+				: -ECOMM; /* hc couldn't write data */
+		} else if (token & QTD_STS_XACT) {
+			/* timeout, bad crc, wrong PID, etc; retried */
+			if (QTD_CERR(token))
+				urb->status = -EPIPE;
+			else {
+				oxu_dbg(oxu, "devpath %s ep%d%s 3strikes\n",
+					urb->dev->devpath,
+					usb_pipeendpoint(urb->pipe),
+					usb_pipein(urb->pipe) ? "in" : "out");
+				urb->status = -EPROTO;
+			}
+		/* CERR nonzero + no errors + halt --> stall */
+		} else if (QTD_CERR(token))
+			urb->status = -EPIPE;
+		else	/* unknown */
+			urb->status = -EPROTO;
+
+		oxu_vdbg(oxu, "dev%d ep%d%s qtd token %08x --> status %d\n",
+			usb_pipedevice(urb->pipe),
+			usb_pipeendpoint(urb->pipe),
+			usb_pipein(urb->pipe) ? "in" : "out",
+			token, urb->status);
+	}
+}
+
+static void ehci_urb_done(struct oxu_hcd *oxu, struct urb *urb)
+__releases(oxu->lock)
+__acquires(oxu->lock)
+{
+	if (likely(urb->hcpriv != NULL)) {
+		struct ehci_qh	*qh = (struct ehci_qh *) urb->hcpriv;
+
+		/* S-mask in a QH means it's an interrupt urb */
+		if ((qh->hw_info2 & cpu_to_le32(QH_SMASK)) != 0) {
+
+			/* ... update hc-wide periodic stats (for usbfs) */
+			oxu_to_hcd(oxu)->self.bandwidth_int_reqs--;
+		}
+		qh_put(qh);
+	}
+
+	urb->hcpriv = NULL;
+	switch (urb->status) {
+	case -EINPROGRESS:		/* success */
+		urb->status = 0;
+		break;
+	default:			/* fault */
+		break;
+	case -EREMOTEIO:		/* fault or normal */
+		if (!(urb->transfer_flags & URB_SHORT_NOT_OK))
+			urb->status = 0;
+		break;
+	case -ECONNRESET:		/* canceled */
+	case -ENOENT:
+		break;
+	}
+
+#ifdef OXU_URB_TRACE
+	oxu_dbg(oxu, "%s %s urb %p ep%d%s status %d len %d/%d\n",
+		__func__, urb->dev->devpath, urb,
+		usb_pipeendpoint(urb->pipe),
+		usb_pipein(urb->pipe) ? "in" : "out",
+		urb->status,
+		urb->actual_length, urb->transfer_buffer_length);
+#endif
+
+	/* complete() can reenter this HCD */
+	spin_unlock(&oxu->lock);
+	usb_hcd_giveback_urb(oxu_to_hcd(oxu), urb, urb->status);
+	spin_lock(&oxu->lock);
+}
+
+static void start_unlink_async(struct oxu_hcd *oxu, struct ehci_qh *qh);
+static void unlink_async(struct oxu_hcd *oxu, struct ehci_qh *qh);
+
+static void intr_deschedule(struct oxu_hcd *oxu, struct ehci_qh *qh);
+static int qh_schedule(struct oxu_hcd *oxu, struct ehci_qh *qh);
+
+#define HALT_BIT cpu_to_le32(QTD_STS_HALT)
+
+/* Process and free completed qtds for a qh, returning URBs to drivers.
+ * Chases up to qh->hw_current.  Returns number of completions called,
+ * indicating how much "real" work we did.
+ */
+static unsigned qh_completions(struct oxu_hcd *oxu, struct ehci_qh *qh)
+{
+	struct ehci_qtd *last = NULL, *end = qh->dummy;
+	struct ehci_qtd	*qtd, *tmp;
+	int stopped;
+	unsigned count = 0;
+	int do_status = 0;
+	u8 state;
+	struct oxu_murb *murb = NULL;
+
+	if (unlikely(list_empty(&qh->qtd_list)))
+		return count;
+
+	/* completions (or tasks on other cpus) must never clobber HALT
+	 * till we've gone through and cleaned everything up, even when
+	 * they add urbs to this qh's queue or mark them for unlinking.
+	 *
+	 * NOTE:  unlinking expects to be done in queue order.
+	 */
+	state = qh->qh_state;
+	qh->qh_state = QH_STATE_COMPLETING;
+	stopped = (state == QH_STATE_IDLE);
+
+	/* remove de-activated QTDs from front of queue.
+	 * after faults (including short reads), cleanup this urb
+	 * then let the queue advance.
+	 * if queue is stopped, handles unlinks.
+	 */
+	list_for_each_entry_safe(qtd, tmp, &qh->qtd_list, qtd_list) {
+		struct urb *urb;
+		u32 token = 0;
+
+		urb = qtd->urb;
+
+		/* Clean up any state from previous QTD ...*/
+		if (last) {
+			if (likely(last->urb != urb)) {
+				if (last->urb->complete == NULL) {
+					murb = (struct oxu_murb *) last->urb;
+					last->urb = murb->main;
+					if (murb->last) {
+						ehci_urb_done(oxu, last->urb);
+						count++;
+					}
+					oxu_murb_free(oxu, murb);
+				} else {
+					ehci_urb_done(oxu, last->urb);
+					count++;
+				}
+			}
+			oxu_qtd_free(oxu, last);
+			last = NULL;
+		}
+
+		/* ignore urbs submitted during completions we reported */
+		if (qtd == end)
+			break;
+
+		/* hardware copies qtd out of qh overlay */
+		rmb();
+		token = le32_to_cpu(qtd->hw_token);
+
+		/* always clean up qtds the hc de-activated */
+		if ((token & QTD_STS_ACTIVE) == 0) {
+
+			if ((token & QTD_STS_HALT) != 0) {
+				stopped = 1;
+
+			/* magic dummy for some short reads; qh won't advance.
+			 * that silicon quirk can kick in with this dummy too.
+			 */
+			} else if (IS_SHORT_READ(token) &&
+					!(qtd->hw_alt_next & EHCI_LIST_END)) {
+				stopped = 1;
+				goto halt;
+			}
+
+		/* stop scanning when we reach qtds the hc is using */
+		} else if (likely(!stopped &&
+				HC_IS_RUNNING(oxu_to_hcd(oxu)->state))) {
+			break;
+
+		} else {
+			stopped = 1;
+
+			if (unlikely(!HC_IS_RUNNING(oxu_to_hcd(oxu)->state)))
+				urb->status = -ESHUTDOWN;
+
+			/* ignore active urbs unless some previous qtd
+			 * for the urb faulted (including short read) or
+			 * its urb was canceled.  we may patch qh or qtds.
+			 */
+			if (likely(urb->status == -EINPROGRESS))
+				continue;
+
+			/* issue status after short control reads */
+			if (unlikely(do_status != 0)
+					&& QTD_PID(token) == 0 /* OUT */) {
+				do_status = 0;
+				continue;
+			}
+
+			/* token in overlay may be most current */
+			if (state == QH_STATE_IDLE
+					&& cpu_to_le32(qtd->qtd_dma)
+						== qh->hw_current)
+				token = le32_to_cpu(qh->hw_token);
+
+			/* force halt for unlinked or blocked qh, so we'll
+			 * patch the qh later and so that completions can't
+			 * activate it while we "know" it's stopped.
+			 */
+			if ((HALT_BIT & qh->hw_token) == 0) {
+halt:
+				qh->hw_token |= HALT_BIT;
+				wmb();
+			}
+		}
+
+		/* Remove it from the queue */
+		qtd_copy_status(oxu, urb->complete ?
+					urb : ((struct oxu_murb *) urb)->main,
+				qtd->length, token);
+		if ((usb_pipein(qtd->urb->pipe)) &&
+				(NULL != qtd->transfer_buffer))
+			memcpy(qtd->transfer_buffer, qtd->buffer, qtd->length);
+		do_status = (urb->status == -EREMOTEIO)
+				&& usb_pipecontrol(urb->pipe);
+
+		if (stopped && qtd->qtd_list.prev != &qh->qtd_list) {
+			last = list_entry(qtd->qtd_list.prev,
+					struct ehci_qtd, qtd_list);
+			last->hw_next = qtd->hw_next;
+		}
+		list_del(&qtd->qtd_list);
+		last = qtd;
+	}
+
+	/* last urb's completion might still need calling */
+	if (likely(last != NULL)) {
+		if (last->urb->complete == NULL) {
+			murb = (struct oxu_murb *) last->urb;
+			last->urb = murb->main;
+			if (murb->last) {
+				ehci_urb_done(oxu, last->urb);
+				count++;
+			}
+			oxu_murb_free(oxu, murb);
+		} else {
+			ehci_urb_done(oxu, last->urb);
+			count++;
+		}
+		oxu_qtd_free(oxu, last);
+	}
+
+	/* restore original state; caller must unlink or relink */
+	qh->qh_state = state;
+
+	/* be sure the hardware's done with the qh before refreshing
+	 * it after fault cleanup, or recovering from silicon wrongly
+	 * overlaying the dummy qtd (which reduces DMA chatter).
+	 */
+	if (stopped != 0 || qh->hw_qtd_next == EHCI_LIST_END) {
+		switch (state) {
+		case QH_STATE_IDLE:
+			qh_refresh(oxu, qh);
+			break;
+		case QH_STATE_LINKED:
+			/* should be rare for periodic transfers,
+			 * except maybe high bandwidth ...
+			 */
+			if ((cpu_to_le32(QH_SMASK)
+					& qh->hw_info2) != 0) {
+				intr_deschedule(oxu, qh);
+				(void) qh_schedule(oxu, qh);
+			} else
+				unlink_async(oxu, qh);
+			break;
+		/* otherwise, unlink already started */
+		}
+	}
+
+	return count;
+}
+
+/* High bandwidth multiplier, as encoded in highspeed endpoint descriptors */
+#define hb_mult(wMaxPacketSize)		(1 + (((wMaxPacketSize) >> 11) & 0x03))
+/* ... and packet size, for any kind of endpoint descriptor */
+#define max_packet(wMaxPacketSize)	((wMaxPacketSize) & 0x07ff)
+
+/* Reverse of qh_urb_transaction: free a list of TDs.
+ * used for cleanup after errors, before HC sees an URB's TDs.
+ */
+static void qtd_list_free(struct oxu_hcd *oxu,
+				struct urb *urb, struct list_head *head)
+{
+	struct ehci_qtd	*qtd, *temp;
+
+	list_for_each_entry_safe(qtd, temp, head, qtd_list) {
+		list_del(&qtd->qtd_list);
+		oxu_qtd_free(oxu, qtd);
+	}
+}
+
+/* Create a list of filled qtds for this URB; won't link into qh.
+ */
+static struct list_head *qh_urb_transaction(struct oxu_hcd *oxu,
+						struct urb *urb,
+						struct list_head *head,
+						gfp_t flags)
+{
+	struct ehci_qtd	*qtd, *qtd_prev;
+	dma_addr_t buf;
+	int len, maxpacket;
+	int is_input;
+	u32 token;
+	void *transfer_buf = NULL;
+	int ret;
+
+	/*
+	 * URBs map to sequences of QTDs: one logical transaction
+	 */
+	qtd = ehci_qtd_alloc(oxu);
+	if (unlikely(!qtd))
+		return NULL;
+	list_add_tail(&qtd->qtd_list, head);
+	qtd->urb = urb;
+
+	token = QTD_STS_ACTIVE;
+	token |= (EHCI_TUNE_CERR << 10);
+	/* for split transactions, SplitXState initialized to zero */
+
+	len = urb->transfer_buffer_length;
+	is_input = usb_pipein(urb->pipe);
+	if (!urb->transfer_buffer && urb->transfer_buffer_length && is_input)
+		urb->transfer_buffer = phys_to_virt(urb->transfer_dma);
+
+	if (usb_pipecontrol(urb->pipe)) {
+		/* SETUP pid */
+		ret = oxu_buf_alloc(oxu, qtd, sizeof(struct usb_ctrlrequest));
+		if (ret)
+			goto cleanup;
+
+		qtd_fill(qtd, qtd->buffer_dma, sizeof(struct usb_ctrlrequest),
+				token | (2 /* "setup" */ << 8), 8);
+		memcpy(qtd->buffer, qtd->urb->setup_packet,
+				sizeof(struct usb_ctrlrequest));
+
+		/* ... and always at least one more pid */
+		token ^= QTD_TOGGLE;
+		qtd_prev = qtd;
+		qtd = ehci_qtd_alloc(oxu);
+		if (unlikely(!qtd))
+			goto cleanup;
+		qtd->urb = urb;
+		qtd_prev->hw_next = QTD_NEXT(qtd->qtd_dma);
+		list_add_tail(&qtd->qtd_list, head);
+
+		/* for zero length DATA stages, STATUS is always IN */
+		if (len == 0)
+			token |= (1 /* "in" */ << 8);
+	}
+
+	/*
+	 * Data transfer stage: buffer setup
+	 */
+
+	ret = oxu_buf_alloc(oxu, qtd, len);
+	if (ret)
+		goto cleanup;
+
+	buf = qtd->buffer_dma;
+	transfer_buf = urb->transfer_buffer;
+
+	if (!is_input)
+		memcpy(qtd->buffer, qtd->urb->transfer_buffer, len);
+
+	if (is_input)
+		token |= (1 /* "in" */ << 8);
+	/* else it's already initted to "out" pid (0 << 8) */
+
+	maxpacket = usb_maxpacket(urb->dev, urb->pipe);
+
+	/*
+	 * buffer gets wrapped in one or more qtds;
+	 * last one may be "short" (including zero len)
+	 * and may serve as a control status ack
+	 */
+	for (;;) {
+		int this_qtd_len;
+
+		this_qtd_len = qtd_fill(qtd, buf, len, token, maxpacket);
+		qtd->transfer_buffer = transfer_buf;
+		len -= this_qtd_len;
+		buf += this_qtd_len;
+		transfer_buf += this_qtd_len;
+		if (is_input)
+			qtd->hw_alt_next = oxu->async->hw_alt_next;
+
+		/* qh makes control packets use qtd toggle; maybe switch it */
+		if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0)
+			token ^= QTD_TOGGLE;
+
+		if (likely(len <= 0))
+			break;
+
+		qtd_prev = qtd;
+		qtd = ehci_qtd_alloc(oxu);
+		if (unlikely(!qtd))
+			goto cleanup;
+		if (likely(len > 0)) {
+			ret = oxu_buf_alloc(oxu, qtd, len);
+			if (ret)
+				goto cleanup;
+		}
+		qtd->urb = urb;
+		qtd_prev->hw_next = QTD_NEXT(qtd->qtd_dma);
+		list_add_tail(&qtd->qtd_list, head);
+	}
+
+	/* unless the bulk/interrupt caller wants a chance to clean
+	 * up after short reads, hc should advance qh past this urb
+	 */
+	if (likely((urb->transfer_flags & URB_SHORT_NOT_OK) == 0
+				|| usb_pipecontrol(urb->pipe)))
+		qtd->hw_alt_next = EHCI_LIST_END;
+
+	/*
+	 * control requests may need a terminating data "status" ack;
+	 * bulk ones may need a terminating short packet (zero length).
+	 */
+	if (likely(urb->transfer_buffer_length != 0)) {
+		int	one_more = 0;
+
+		if (usb_pipecontrol(urb->pipe)) {
+			one_more = 1;
+			token ^= 0x0100;	/* "in" <--> "out"  */
+			token |= QTD_TOGGLE;	/* force DATA1 */
+		} else if (usb_pipebulk(urb->pipe)
+				&& (urb->transfer_flags & URB_ZERO_PACKET)
+				&& !(urb->transfer_buffer_length % maxpacket)) {
+			one_more = 1;
+		}
+		if (one_more) {
+			qtd_prev = qtd;
+			qtd = ehci_qtd_alloc(oxu);
+			if (unlikely(!qtd))
+				goto cleanup;
+			qtd->urb = urb;
+			qtd_prev->hw_next = QTD_NEXT(qtd->qtd_dma);
+			list_add_tail(&qtd->qtd_list, head);
+
+			/* never any data in such packets */
+			qtd_fill(qtd, 0, 0, token, 0);
+		}
+	}
+
+	/* by default, enable interrupt on urb completion */
+	qtd->hw_token |= cpu_to_le32(QTD_IOC);
+	return head;
+
+cleanup:
+	qtd_list_free(oxu, urb, head);
+	return NULL;
+}
+
+/* Each QH holds a qtd list; a QH is used for everything except iso.
+ *
+ * For interrupt urbs, the scheduler must set the microframe scheduling
+ * mask(s) each time the QH gets scheduled.  For highspeed, that's
+ * just one microframe in the s-mask.  For split interrupt transactions
+ * there are additional complications: c-mask, maybe FSTNs.
+ */
+static struct ehci_qh *qh_make(struct oxu_hcd *oxu,
+				struct urb *urb, gfp_t flags)
+{
+	struct ehci_qh *qh = oxu_qh_alloc(oxu);
+	u32 info1 = 0, info2 = 0;
+	int is_input, type;
+	int maxp = 0;
+
+	if (!qh)
+		return qh;
+
+	/*
+	 * init endpoint/device data for this QH
+	 */
+	info1 |= usb_pipeendpoint(urb->pipe) << 8;
+	info1 |= usb_pipedevice(urb->pipe) << 0;
+
+	is_input = usb_pipein(urb->pipe);
+	type = usb_pipetype(urb->pipe);
+	maxp = usb_maxpacket(urb->dev, urb->pipe);
+
+	/* Compute interrupt scheduling parameters just once, and save.
+	 * - allowing for high bandwidth, how many nsec/uframe are used?
+	 * - split transactions need a second CSPLIT uframe; same question
+	 * - splits also need a schedule gap (for full/low speed I/O)
+	 * - qh has a polling interval
+	 *
+	 * For control/bulk requests, the HC or TT handles these.
+	 */
+	if (type == PIPE_INTERRUPT) {
+		qh->usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH,
+								is_input, 0,
+				hb_mult(maxp) * max_packet(maxp)));
+		qh->start = NO_FRAME;
+
+		if (urb->dev->speed == USB_SPEED_HIGH) {
+			qh->c_usecs = 0;
+			qh->gap_uf = 0;
+
+			qh->period = urb->interval >> 3;
+			if (qh->period == 0 && urb->interval != 1) {
+				/* NOTE interval 2 or 4 uframes could work.
+				 * But interval 1 scheduling is simpler, and
+				 * includes high bandwidth.
+				 */
+				oxu_dbg(oxu, "intr period %d uframes, NYET!\n",
+					urb->interval);
+				goto done;
+			}
+		} else {
+			struct usb_tt	*tt = urb->dev->tt;
+			int		think_time;
+
+			/* gap is f(FS/LS transfer times) */
+			qh->gap_uf = 1 + usb_calc_bus_time(urb->dev->speed,
+					is_input, 0, maxp) / (125 * 1000);
+
+			/* FIXME this just approximates SPLIT/CSPLIT times */
+			if (is_input) {		/* SPLIT, gap, CSPLIT+DATA */
+				qh->c_usecs = qh->usecs + HS_USECS(0);
+				qh->usecs = HS_USECS(1);
+			} else {		/* SPLIT+DATA, gap, CSPLIT */
+				qh->usecs += HS_USECS(1);
+				qh->c_usecs = HS_USECS(0);
+			}
+
+			think_time = tt ? tt->think_time : 0;
+			qh->tt_usecs = NS_TO_US(think_time +
+					usb_calc_bus_time(urb->dev->speed,
+					is_input, 0, max_packet(maxp)));
+			qh->period = urb->interval;
+		}
+	}
+
+	/* support for tt scheduling, and access to toggles */
+	qh->dev = urb->dev;
+
+	/* using TT? */
+	switch (urb->dev->speed) {
+	case USB_SPEED_LOW:
+		info1 |= (1 << 12);	/* EPS "low" */
+		fallthrough;
+
+	case USB_SPEED_FULL:
+		/* EPS 0 means "full" */
+		if (type != PIPE_INTERRUPT)
+			info1 |= (EHCI_TUNE_RL_TT << 28);
+		if (type == PIPE_CONTROL) {
+			info1 |= (1 << 27);	/* for TT */
+			info1 |= 1 << 14;	/* toggle from qtd */
+		}
+		info1 |= maxp << 16;
+
+		info2 |= (EHCI_TUNE_MULT_TT << 30);
+		info2 |= urb->dev->ttport << 23;
+
+		/* NOTE:  if (PIPE_INTERRUPT) { scheduler sets c-mask } */
+
+		break;
+
+	case USB_SPEED_HIGH:		/* no TT involved */
+		info1 |= (2 << 12);	/* EPS "high" */
+		if (type == PIPE_CONTROL) {
+			info1 |= (EHCI_TUNE_RL_HS << 28);
+			info1 |= 64 << 16;	/* usb2 fixed maxpacket */
+			info1 |= 1 << 14;	/* toggle from qtd */
+			info2 |= (EHCI_TUNE_MULT_HS << 30);
+		} else if (type == PIPE_BULK) {
+			info1 |= (EHCI_TUNE_RL_HS << 28);
+			info1 |= 512 << 16;	/* usb2 fixed maxpacket */
+			info2 |= (EHCI_TUNE_MULT_HS << 30);
+		} else {		/* PIPE_INTERRUPT */
+			info1 |= max_packet(maxp) << 16;
+			info2 |= hb_mult(maxp) << 30;
+		}
+		break;
+	default:
+		oxu_dbg(oxu, "bogus dev %p speed %d\n", urb->dev, urb->dev->speed);
+done:
+		qh_put(qh);
+		return NULL;
+	}
+
+	/* NOTE:  if (PIPE_INTERRUPT) { scheduler sets s-mask } */
+
+	/* init as live, toggle clear, advance to dummy */
+	qh->qh_state = QH_STATE_IDLE;
+	qh->hw_info1 = cpu_to_le32(info1);
+	qh->hw_info2 = cpu_to_le32(info2);
+	usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), !is_input, 1);
+	qh_refresh(oxu, qh);
+	return qh;
+}
+
+/* Move qh (and its qtds) onto async queue; maybe enable queue.
+ */
+static void qh_link_async(struct oxu_hcd *oxu, struct ehci_qh *qh)
+{
+	__le32 dma = QH_NEXT(qh->qh_dma);
+	struct ehci_qh *head;
+
+	/* (re)start the async schedule? */
+	head = oxu->async;
+	timer_action_done(oxu, TIMER_ASYNC_OFF);
+	if (!head->qh_next.qh) {
+		u32	cmd = readl(&oxu->regs->command);
+
+		if (!(cmd & CMD_ASE)) {
+			/* in case a clear of CMD_ASE didn't take yet */
+			(void)handshake(oxu, &oxu->regs->status,
+					STS_ASS, 0, 150);
+			cmd |= CMD_ASE | CMD_RUN;
+			writel(cmd, &oxu->regs->command);
+			oxu_to_hcd(oxu)->state = HC_STATE_RUNNING;
+			/* posted write need not be known to HC yet ... */
+		}
+	}
+
+	/* clear halt and/or toggle; and maybe recover from silicon quirk */
+	if (qh->qh_state == QH_STATE_IDLE)
+		qh_refresh(oxu, qh);
+
+	/* splice right after start */
+	qh->qh_next = head->qh_next;
+	qh->hw_next = head->hw_next;
+	wmb();
+
+	head->qh_next.qh = qh;
+	head->hw_next = dma;
+
+	qh->qh_state = QH_STATE_LINKED;
+	/* qtd completions reported later by interrupt */
+}
+
+#define	QH_ADDR_MASK	cpu_to_le32(0x7f)
+
+/*
+ * For control/bulk/interrupt, return QH with these TDs appended.
+ * Allocates and initializes the QH if necessary.
+ * Returns null if it can't allocate a QH it needs to.
+ * If the QH has TDs (urbs) already, that's great.
+ */
+static struct ehci_qh *qh_append_tds(struct oxu_hcd *oxu,
+				struct urb *urb, struct list_head *qtd_list,
+				int epnum, void	**ptr)
+{
+	struct ehci_qh *qh = NULL;
+
+	qh = (struct ehci_qh *) *ptr;
+	if (unlikely(qh == NULL)) {
+		/* can't sleep here, we have oxu->lock... */
+		qh = qh_make(oxu, urb, GFP_ATOMIC);
+		*ptr = qh;
+	}
+	if (likely(qh != NULL)) {
+		struct ehci_qtd	*qtd;
+
+		if (unlikely(list_empty(qtd_list)))
+			qtd = NULL;
+		else
+			qtd = list_entry(qtd_list->next, struct ehci_qtd,
+					qtd_list);
+
+		/* control qh may need patching ... */
+		if (unlikely(epnum == 0)) {
+
+			/* usb_reset_device() briefly reverts to address 0 */
+			if (usb_pipedevice(urb->pipe) == 0)
+				qh->hw_info1 &= ~QH_ADDR_MASK;
+		}
+
+		/* just one way to queue requests: swap with the dummy qtd.
+		 * only hc or qh_refresh() ever modify the overlay.
+		 */
+		if (likely(qtd != NULL)) {
+			struct ehci_qtd	*dummy;
+			dma_addr_t dma;
+			__le32 token;
+
+			/* to avoid racing the HC, use the dummy td instead of
+			 * the first td of our list (becomes new dummy).  both
+			 * tds stay deactivated until we're done, when the
+			 * HC is allowed to fetch the old dummy (4.10.2).
+			 */
+			token = qtd->hw_token;
+			qtd->hw_token = HALT_BIT;
+			wmb();
+			dummy = qh->dummy;
+
+			dma = dummy->qtd_dma;
+			*dummy = *qtd;
+			dummy->qtd_dma = dma;
+
+			list_del(&qtd->qtd_list);
+			list_add(&dummy->qtd_list, qtd_list);
+			list_splice(qtd_list, qh->qtd_list.prev);
+
+			ehci_qtd_init(qtd, qtd->qtd_dma);
+			qh->dummy = qtd;
+
+			/* hc must see the new dummy at list end */
+			dma = qtd->qtd_dma;
+			qtd = list_entry(qh->qtd_list.prev,
+					struct ehci_qtd, qtd_list);
+			qtd->hw_next = QTD_NEXT(dma);
+
+			/* let the hc process these next qtds */
+			dummy->hw_token = (token & ~(0x80));
+			wmb();
+			dummy->hw_token = token;
+
+			urb->hcpriv = qh_get(qh);
+		}
+	}
+	return qh;
+}
+
+static int submit_async(struct oxu_hcd	*oxu, struct urb *urb,
+			struct list_head *qtd_list, gfp_t mem_flags)
+{
+	int epnum = urb->ep->desc.bEndpointAddress;
+	unsigned long flags;
+	struct ehci_qh *qh = NULL;
+	int rc = 0;
+#ifdef OXU_URB_TRACE
+	struct ehci_qtd	*qtd;
+
+	qtd = list_entry(qtd_list->next, struct ehci_qtd, qtd_list);
+
+	oxu_dbg(oxu, "%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n",
+		__func__, urb->dev->devpath, urb,
+		epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out",
+		urb->transfer_buffer_length,
+		qtd, urb->ep->hcpriv);
+#endif
+
+	spin_lock_irqsave(&oxu->lock, flags);
+	if (unlikely(!HCD_HW_ACCESSIBLE(oxu_to_hcd(oxu)))) {
+		rc = -ESHUTDOWN;
+		goto done;
+	}
+
+	qh = qh_append_tds(oxu, urb, qtd_list, epnum, &urb->ep->hcpriv);
+	if (unlikely(qh == NULL)) {
+		rc = -ENOMEM;
+		goto done;
+	}
+
+	/* Control/bulk operations through TTs don't need scheduling,
+	 * the HC and TT handle it when the TT has a buffer ready.
+	 */
+	if (likely(qh->qh_state == QH_STATE_IDLE))
+		qh_link_async(oxu, qh_get(qh));
+done:
+	spin_unlock_irqrestore(&oxu->lock, flags);
+	if (unlikely(qh == NULL))
+		qtd_list_free(oxu, urb, qtd_list);
+	return rc;
+}
+
+/* The async qh for the qtds being reclaimed are now unlinked from the HC */
+
+static void end_unlink_async(struct oxu_hcd *oxu)
+{
+	struct ehci_qh *qh = oxu->reclaim;
+	struct ehci_qh *next;
+
+	timer_action_done(oxu, TIMER_IAA_WATCHDOG);
+
+	qh->qh_state = QH_STATE_IDLE;
+	qh->qh_next.qh = NULL;
+	qh_put(qh);			/* refcount from reclaim */
+
+	/* other unlink(s) may be pending (in QH_STATE_UNLINK_WAIT) */
+	next = qh->reclaim;
+	oxu->reclaim = next;
+	oxu->reclaim_ready = 0;
+	qh->reclaim = NULL;
+
+	qh_completions(oxu, qh);
+
+	if (!list_empty(&qh->qtd_list)
+			&& HC_IS_RUNNING(oxu_to_hcd(oxu)->state))
+		qh_link_async(oxu, qh);
+	else {
+		qh_put(qh);		/* refcount from async list */
+
+		/* it's not free to turn the async schedule on/off; leave it
+		 * active but idle for a while once it empties.
+		 */
+		if (HC_IS_RUNNING(oxu_to_hcd(oxu)->state)
+				&& oxu->async->qh_next.qh == NULL)
+			timer_action(oxu, TIMER_ASYNC_OFF);
+	}
+
+	if (next) {
+		oxu->reclaim = NULL;
+		start_unlink_async(oxu, next);
+	}
+}
+
+/* makes sure the async qh will become idle */
+/* caller must own oxu->lock */
+
+static void start_unlink_async(struct oxu_hcd *oxu, struct ehci_qh *qh)
+{
+	int cmd = readl(&oxu->regs->command);
+	struct ehci_qh *prev;
+
+#ifdef DEBUG
+	assert_spin_locked(&oxu->lock);
+	BUG_ON(oxu->reclaim || (qh->qh_state != QH_STATE_LINKED
+				&& qh->qh_state != QH_STATE_UNLINK_WAIT));
+#endif
+
+	/* stop async schedule right now? */
+	if (unlikely(qh == oxu->async)) {
+		/* can't get here without STS_ASS set */
+		if (oxu_to_hcd(oxu)->state != HC_STATE_HALT
+				&& !oxu->reclaim) {
+			/* ... and CMD_IAAD clear */
+			writel(cmd & ~CMD_ASE, &oxu->regs->command);
+			wmb();
+			/* handshake later, if we need to */
+			timer_action_done(oxu, TIMER_ASYNC_OFF);
+		}
+		return;
+	}
+
+	qh->qh_state = QH_STATE_UNLINK;
+	oxu->reclaim = qh = qh_get(qh);
+
+	prev = oxu->async;
+	while (prev->qh_next.qh != qh)
+		prev = prev->qh_next.qh;
+
+	prev->hw_next = qh->hw_next;
+	prev->qh_next = qh->qh_next;
+	wmb();
+
+	if (unlikely(oxu_to_hcd(oxu)->state == HC_STATE_HALT)) {
+		/* if (unlikely(qh->reclaim != 0))
+		 *	this will recurse, probably not much
+		 */
+		end_unlink_async(oxu);
+		return;
+	}
+
+	oxu->reclaim_ready = 0;
+	cmd |= CMD_IAAD;
+	writel(cmd, &oxu->regs->command);
+	(void) readl(&oxu->regs->command);
+	timer_action(oxu, TIMER_IAA_WATCHDOG);
+}
+
+static void scan_async(struct oxu_hcd *oxu)
+{
+	struct ehci_qh *qh;
+	enum ehci_timer_action action = TIMER_IO_WATCHDOG;
+
+	if (!++(oxu->stamp))
+		oxu->stamp++;
+	timer_action_done(oxu, TIMER_ASYNC_SHRINK);
+rescan:
+	qh = oxu->async->qh_next.qh;
+	if (likely(qh != NULL)) {
+		do {
+			/* clean any finished work for this qh */
+			if (!list_empty(&qh->qtd_list)
+					&& qh->stamp != oxu->stamp) {
+				int temp;
+
+				/* unlinks could happen here; completion
+				 * reporting drops the lock.  rescan using
+				 * the latest schedule, but don't rescan
+				 * qhs we already finished (no looping).
+				 */
+				qh = qh_get(qh);
+				qh->stamp = oxu->stamp;
+				temp = qh_completions(oxu, qh);
+				qh_put(qh);
+				if (temp != 0)
+					goto rescan;
+			}
+
+			/* unlink idle entries, reducing HC PCI usage as well
+			 * as HCD schedule-scanning costs.  delay for any qh
+			 * we just scanned, there's a not-unusual case that it
+			 * doesn't stay idle for long.
+			 * (plus, avoids some kind of re-activation race.)
+			 */
+			if (list_empty(&qh->qtd_list)) {
+				if (qh->stamp == oxu->stamp)
+					action = TIMER_ASYNC_SHRINK;
+				else if (!oxu->reclaim
+					    && qh->qh_state == QH_STATE_LINKED)
+					start_unlink_async(oxu, qh);
+			}
+
+			qh = qh->qh_next.qh;
+		} while (qh);
+	}
+	if (action == TIMER_ASYNC_SHRINK)
+		timer_action(oxu, TIMER_ASYNC_SHRINK);
+}
+
+/*
+ * periodic_next_shadow - return "next" pointer on shadow list
+ * @periodic: host pointer to qh/itd/sitd
+ * @tag: hardware tag for type of this record
+ */
+static union ehci_shadow *periodic_next_shadow(union ehci_shadow *periodic,
+						__le32 tag)
+{
+	switch (tag) {
+	default:
+	case Q_TYPE_QH:
+		return &periodic->qh->qh_next;
+	}
+}
+
+/* caller must hold oxu->lock */
+static void periodic_unlink(struct oxu_hcd *oxu, unsigned frame, void *ptr)
+{
+	union ehci_shadow *prev_p = &oxu->pshadow[frame];
+	__le32 *hw_p = &oxu->periodic[frame];
+	union ehci_shadow here = *prev_p;
+
+	/* find predecessor of "ptr"; hw and shadow lists are in sync */
+	while (here.ptr && here.ptr != ptr) {
+		prev_p = periodic_next_shadow(prev_p, Q_NEXT_TYPE(*hw_p));
+		hw_p = here.hw_next;
+		here = *prev_p;
+	}
+	/* an interrupt entry (at list end) could have been shared */
+	if (!here.ptr)
+		return;
+
+	/* update shadow and hardware lists ... the old "next" pointers
+	 * from ptr may still be in use, the caller updates them.
+	 */
+	*prev_p = *periodic_next_shadow(&here, Q_NEXT_TYPE(*hw_p));
+	*hw_p = *here.hw_next;
+}
+
+/* how many of the uframe's 125 usecs are allocated? */
+static unsigned short periodic_usecs(struct oxu_hcd *oxu,
+					unsigned frame, unsigned uframe)
+{
+	__le32 *hw_p = &oxu->periodic[frame];
+	union ehci_shadow *q = &oxu->pshadow[frame];
+	unsigned usecs = 0;
+
+	while (q->ptr) {
+		switch (Q_NEXT_TYPE(*hw_p)) {
+		case Q_TYPE_QH:
+		default:
+			/* is it in the S-mask? */
+			if (q->qh->hw_info2 & cpu_to_le32(1 << uframe))
+				usecs += q->qh->usecs;
+			/* ... or C-mask? */
+			if (q->qh->hw_info2 & cpu_to_le32(1 << (8 + uframe)))
+				usecs += q->qh->c_usecs;
+			hw_p = &q->qh->hw_next;
+			q = &q->qh->qh_next;
+			break;
+		}
+	}
+#ifdef DEBUG
+	if (usecs > 100)
+		oxu_err(oxu, "uframe %d sched overrun: %d usecs\n",
+						frame * 8 + uframe, usecs);
+#endif
+	return usecs;
+}
+
+static int enable_periodic(struct oxu_hcd *oxu)
+{
+	u32 cmd;
+	int status;
+
+	/* did clearing PSE did take effect yet?
+	 * takes effect only at frame boundaries...
+	 */
+	status = handshake(oxu, &oxu->regs->status, STS_PSS, 0, 9 * 125);
+	if (status != 0) {
+		oxu_to_hcd(oxu)->state = HC_STATE_HALT;
+		usb_hc_died(oxu_to_hcd(oxu));
+		return status;
+	}
+
+	cmd = readl(&oxu->regs->command) | CMD_PSE;
+	writel(cmd, &oxu->regs->command);
+	/* posted write ... PSS happens later */
+	oxu_to_hcd(oxu)->state = HC_STATE_RUNNING;
+
+	/* make sure ehci_work scans these */
+	oxu->next_uframe = readl(&oxu->regs->frame_index)
+		% (oxu->periodic_size << 3);
+	return 0;
+}
+
+static int disable_periodic(struct oxu_hcd *oxu)
+{
+	u32 cmd;
+	int status;
+
+	/* did setting PSE not take effect yet?
+	 * takes effect only at frame boundaries...
+	 */
+	status = handshake(oxu, &oxu->regs->status, STS_PSS, STS_PSS, 9 * 125);
+	if (status != 0) {
+		oxu_to_hcd(oxu)->state = HC_STATE_HALT;
+		usb_hc_died(oxu_to_hcd(oxu));
+		return status;
+	}
+
+	cmd = readl(&oxu->regs->command) & ~CMD_PSE;
+	writel(cmd, &oxu->regs->command);
+	/* posted write ... */
+
+	oxu->next_uframe = -1;
+	return 0;
+}
+
+/* periodic schedule slots have iso tds (normal or split) first, then a
+ * sparse tree for active interrupt transfers.
+ *
+ * this just links in a qh; caller guarantees uframe masks are set right.
+ * no FSTN support (yet; oxu 0.96+)
+ */
+static int qh_link_periodic(struct oxu_hcd *oxu, struct ehci_qh *qh)
+{
+	unsigned i;
+	unsigned period = qh->period;
+
+	dev_dbg(&qh->dev->dev,
+		"link qh%d-%04x/%p start %d [%d/%d us]\n",
+		period, le32_to_cpup(&qh->hw_info2) & (QH_CMASK | QH_SMASK),
+		qh, qh->start, qh->usecs, qh->c_usecs);
+
+	/* high bandwidth, or otherwise every microframe */
+	if (period == 0)
+		period = 1;
+
+	for (i = qh->start; i < oxu->periodic_size; i += period) {
+		union ehci_shadow	*prev = &oxu->pshadow[i];
+		__le32			*hw_p = &oxu->periodic[i];
+		union ehci_shadow	here = *prev;
+		__le32			type = 0;
+
+		/* skip the iso nodes at list head */
+		while (here.ptr) {
+			type = Q_NEXT_TYPE(*hw_p);
+			if (type == Q_TYPE_QH)
+				break;
+			prev = periodic_next_shadow(prev, type);
+			hw_p = &here.qh->hw_next;
+			here = *prev;
+		}
+
+		/* sorting each branch by period (slow-->fast)
+		 * enables sharing interior tree nodes
+		 */
+		while (here.ptr && qh != here.qh) {
+			if (qh->period > here.qh->period)
+				break;
+			prev = &here.qh->qh_next;
+			hw_p = &here.qh->hw_next;
+			here = *prev;
+		}
+		/* link in this qh, unless some earlier pass did that */
+		if (qh != here.qh) {
+			qh->qh_next = here;
+			if (here.qh)
+				qh->hw_next = *hw_p;
+			wmb();
+			prev->qh = qh;
+			*hw_p = QH_NEXT(qh->qh_dma);
+		}
+	}
+	qh->qh_state = QH_STATE_LINKED;
+	qh_get(qh);
+
+	/* update per-qh bandwidth for usbfs */
+	oxu_to_hcd(oxu)->self.bandwidth_allocated += qh->period
+		? ((qh->usecs + qh->c_usecs) / qh->period)
+		: (qh->usecs * 8);
+
+	/* maybe enable periodic schedule processing */
+	if (!oxu->periodic_sched++)
+		return enable_periodic(oxu);
+
+	return 0;
+}
+
+static void qh_unlink_periodic(struct oxu_hcd *oxu, struct ehci_qh *qh)
+{
+	unsigned i;
+	unsigned period;
+
+	/* FIXME:
+	 *   IF this isn't high speed
+	 *   and this qh is active in the current uframe
+	 *   (and overlay token SplitXstate is false?)
+	 * THEN
+	 *   qh->hw_info1 |= cpu_to_le32(1 << 7 "ignore");
+	 */
+
+	/* high bandwidth, or otherwise part of every microframe */
+	period = qh->period;
+	if (period == 0)
+		period = 1;
+
+	for (i = qh->start; i < oxu->periodic_size; i += period)
+		periodic_unlink(oxu, i, qh);
+
+	/* update per-qh bandwidth for usbfs */
+	oxu_to_hcd(oxu)->self.bandwidth_allocated -= qh->period
+		? ((qh->usecs + qh->c_usecs) / qh->period)
+		: (qh->usecs * 8);
+
+	dev_dbg(&qh->dev->dev,
+		"unlink qh%d-%04x/%p start %d [%d/%d us]\n",
+		qh->period,
+		le32_to_cpup(&qh->hw_info2) & (QH_CMASK | QH_SMASK),
+		qh, qh->start, qh->usecs, qh->c_usecs);
+
+	/* qh->qh_next still "live" to HC */
+	qh->qh_state = QH_STATE_UNLINK;
+	qh->qh_next.ptr = NULL;
+	qh_put(qh);
+
+	/* maybe turn off periodic schedule */
+	oxu->periodic_sched--;
+	if (!oxu->periodic_sched)
+		(void) disable_periodic(oxu);
+}
+
+static void intr_deschedule(struct oxu_hcd *oxu, struct ehci_qh *qh)
+{
+	unsigned wait;
+
+	qh_unlink_periodic(oxu, qh);
+
+	/* simple/paranoid:  always delay, expecting the HC needs to read
+	 * qh->hw_next or finish a writeback after SPLIT/CSPLIT ... and
+	 * expect hub_wq to clean up after any CSPLITs we won't issue.
+	 * active high speed queues may need bigger delays...
+	 */
+	if (list_empty(&qh->qtd_list)
+		|| (cpu_to_le32(QH_CMASK) & qh->hw_info2) != 0)
+		wait = 2;
+	else
+		wait = 55;	/* worst case: 3 * 1024 */
+
+	udelay(wait);
+	qh->qh_state = QH_STATE_IDLE;
+	qh->hw_next = EHCI_LIST_END;
+	wmb();
+}
+
+static int check_period(struct oxu_hcd *oxu,
+			unsigned frame, unsigned uframe,
+			unsigned period, unsigned usecs)
+{
+	int claimed;
+
+	/* complete split running into next frame?
+	 * given FSTN support, we could sometimes check...
+	 */
+	if (uframe >= 8)
+		return 0;
+
+	/*
+	 * 80% periodic == 100 usec/uframe available
+	 * convert "usecs we need" to "max already claimed"
+	 */
+	usecs = 100 - usecs;
+
+	/* we "know" 2 and 4 uframe intervals were rejected; so
+	 * for period 0, check _every_ microframe in the schedule.
+	 */
+	if (unlikely(period == 0)) {
+		do {
+			for (uframe = 0; uframe < 7; uframe++) {
+				claimed = periodic_usecs(oxu, frame, uframe);
+				if (claimed > usecs)
+					return 0;
+			}
+		} while ((frame += 1) < oxu->periodic_size);
+
+	/* just check the specified uframe, at that period */
+	} else {
+		do {
+			claimed = periodic_usecs(oxu, frame, uframe);
+			if (claimed > usecs)
+				return 0;
+		} while ((frame += period) < oxu->periodic_size);
+	}
+
+	return 1;
+}
+
+static int check_intr_schedule(struct oxu_hcd	*oxu,
+				unsigned frame, unsigned uframe,
+				const struct ehci_qh *qh, __le32 *c_maskp)
+{
+	int retval = -ENOSPC;
+
+	if (qh->c_usecs && uframe >= 6)		/* FSTN territory? */
+		goto done;
+
+	if (!check_period(oxu, frame, uframe, qh->period, qh->usecs))
+		goto done;
+	if (!qh->c_usecs) {
+		retval = 0;
+		*c_maskp = 0;
+		goto done;
+	}
+
+done:
+	return retval;
+}
+
+/* "first fit" scheduling policy used the first time through,
+ * or when the previous schedule slot can't be re-used.
+ */
+static int qh_schedule(struct oxu_hcd *oxu, struct ehci_qh *qh)
+{
+	int		status;
+	unsigned	uframe;
+	__le32		c_mask;
+	unsigned	frame;		/* 0..(qh->period - 1), or NO_FRAME */
+
+	qh_refresh(oxu, qh);
+	qh->hw_next = EHCI_LIST_END;
+	frame = qh->start;
+
+	/* reuse the previous schedule slots, if we can */
+	if (frame < qh->period) {
+		uframe = ffs(le32_to_cpup(&qh->hw_info2) & QH_SMASK);
+		status = check_intr_schedule(oxu, frame, --uframe,
+				qh, &c_mask);
+	} else {
+		uframe = 0;
+		c_mask = 0;
+		status = -ENOSPC;
+	}
+
+	/* else scan the schedule to find a group of slots such that all
+	 * uframes have enough periodic bandwidth available.
+	 */
+	if (status) {
+		/* "normal" case, uframing flexible except with splits */
+		if (qh->period) {
+			frame = qh->period - 1;
+			do {
+				for (uframe = 0; uframe < 8; uframe++) {
+					status = check_intr_schedule(oxu,
+							frame, uframe, qh,
+							&c_mask);
+					if (status == 0)
+						break;
+				}
+			} while (status && frame--);
+
+		/* qh->period == 0 means every uframe */
+		} else {
+			frame = 0;
+			status = check_intr_schedule(oxu, 0, 0, qh, &c_mask);
+		}
+		if (status)
+			goto done;
+		qh->start = frame;
+
+		/* reset S-frame and (maybe) C-frame masks */
+		qh->hw_info2 &= cpu_to_le32(~(QH_CMASK | QH_SMASK));
+		qh->hw_info2 |= qh->period
+			? cpu_to_le32(1 << uframe)
+			: cpu_to_le32(QH_SMASK);
+		qh->hw_info2 |= c_mask;
+	} else
+		oxu_dbg(oxu, "reused qh %p schedule\n", qh);
+
+	/* stuff into the periodic schedule */
+	status = qh_link_periodic(oxu, qh);
+done:
+	return status;
+}
+
+static int intr_submit(struct oxu_hcd *oxu, struct urb *urb,
+			struct list_head *qtd_list, gfp_t mem_flags)
+{
+	unsigned epnum;
+	unsigned long flags;
+	struct ehci_qh *qh;
+	int status = 0;
+	struct list_head	empty;
+
+	/* get endpoint and transfer/schedule data */
+	epnum = urb->ep->desc.bEndpointAddress;
+
+	spin_lock_irqsave(&oxu->lock, flags);
+
+	if (unlikely(!HCD_HW_ACCESSIBLE(oxu_to_hcd(oxu)))) {
+		status = -ESHUTDOWN;
+		goto done;
+	}
+
+	/* get qh and force any scheduling errors */
+	INIT_LIST_HEAD(&empty);
+	qh = qh_append_tds(oxu, urb, &empty, epnum, &urb->ep->hcpriv);
+	if (qh == NULL) {
+		status = -ENOMEM;
+		goto done;
+	}
+	if (qh->qh_state == QH_STATE_IDLE) {
+		status = qh_schedule(oxu, qh);
+		if (status != 0)
+			goto done;
+	}
+
+	/* then queue the urb's tds to the qh */
+	qh = qh_append_tds(oxu, urb, qtd_list, epnum, &urb->ep->hcpriv);
+	BUG_ON(qh == NULL);
+
+	/* ... update usbfs periodic stats */
+	oxu_to_hcd(oxu)->self.bandwidth_int_reqs++;
+
+done:
+	spin_unlock_irqrestore(&oxu->lock, flags);
+	if (status)
+		qtd_list_free(oxu, urb, qtd_list);
+
+	return status;
+}
+
+static inline int itd_submit(struct oxu_hcd *oxu, struct urb *urb,
+						gfp_t mem_flags)
+{
+	oxu_dbg(oxu, "iso support is missing!\n");
+	return -ENOSYS;
+}
+
+static inline int sitd_submit(struct oxu_hcd *oxu, struct urb *urb,
+						gfp_t mem_flags)
+{
+	oxu_dbg(oxu, "split iso support is missing!\n");
+	return -ENOSYS;
+}
+
+static void scan_periodic(struct oxu_hcd *oxu)
+{
+	unsigned frame, clock, now_uframe, mod;
+	unsigned modified;
+
+	mod = oxu->periodic_size << 3;
+
+	/*
+	 * When running, scan from last scan point up to "now"
+	 * else clean up by scanning everything that's left.
+	 * Touches as few pages as possible:  cache-friendly.
+	 */
+	now_uframe = oxu->next_uframe;
+	if (HC_IS_RUNNING(oxu_to_hcd(oxu)->state))
+		clock = readl(&oxu->regs->frame_index);
+	else
+		clock = now_uframe + mod - 1;
+	clock %= mod;
+
+	for (;;) {
+		union ehci_shadow	q, *q_p;
+		__le32			type, *hw_p;
+
+		/* don't scan past the live uframe */
+		frame = now_uframe >> 3;
+		if (frame != (clock >> 3)) {
+			/* safe to scan the whole frame at once */
+			now_uframe |= 0x07;
+		}
+
+restart:
+		/* scan each element in frame's queue for completions */
+		q_p = &oxu->pshadow[frame];
+		hw_p = &oxu->periodic[frame];
+		q.ptr = q_p->ptr;
+		type = Q_NEXT_TYPE(*hw_p);
+		modified = 0;
+
+		while (q.ptr != NULL) {
+			union ehci_shadow temp;
+
+			switch (type) {
+			case Q_TYPE_QH:
+				/* handle any completions */
+				temp.qh = qh_get(q.qh);
+				type = Q_NEXT_TYPE(q.qh->hw_next);
+				q = q.qh->qh_next;
+				modified = qh_completions(oxu, temp.qh);
+				if (unlikely(list_empty(&temp.qh->qtd_list)))
+					intr_deschedule(oxu, temp.qh);
+				qh_put(temp.qh);
+				break;
+			default:
+				oxu_dbg(oxu, "corrupt type %d frame %d shadow %p\n",
+					type, frame, q.ptr);
+				q.ptr = NULL;
+			}
+
+			/* assume completion callbacks modify the queue */
+			if (unlikely(modified))
+				goto restart;
+		}
+
+		/* Stop when we catch up to the HC */
+
+		/* FIXME:  this assumes we won't get lapped when
+		 * latencies climb; that should be rare, but...
+		 * detect it, and just go all the way around.
+		 * FLR might help detect this case, so long as latencies
+		 * don't exceed periodic_size msec (default 1.024 sec).
+		 */
+
+		/* FIXME: likewise assumes HC doesn't halt mid-scan */
+
+		if (now_uframe == clock) {
+			unsigned	now;
+
+			if (!HC_IS_RUNNING(oxu_to_hcd(oxu)->state))
+				break;
+			oxu->next_uframe = now_uframe;
+			now = readl(&oxu->regs->frame_index) % mod;
+			if (now_uframe == now)
+				break;
+
+			/* rescan the rest of this frame, then ... */
+			clock = now;
+		} else {
+			now_uframe++;
+			now_uframe %= mod;
+		}
+	}
+}
+
+/* On some systems, leaving remote wakeup enabled prevents system shutdown.
+ * The firmware seems to think that powering off is a wakeup event!
+ * This routine turns off remote wakeup and everything else, on all ports.
+ */
+static void ehci_turn_off_all_ports(struct oxu_hcd *oxu)
+{
+	int port = HCS_N_PORTS(oxu->hcs_params);
+
+	while (port--)
+		writel(PORT_RWC_BITS, &oxu->regs->port_status[port]);
+}
+
+static void ehci_port_power(struct oxu_hcd *oxu, int is_on)
+{
+	unsigned port;
+
+	if (!HCS_PPC(oxu->hcs_params))
+		return;
+
+	oxu_dbg(oxu, "...power%s ports...\n", is_on ? "up" : "down");
+	for (port = HCS_N_PORTS(oxu->hcs_params); port > 0; ) {
+		if (is_on)
+			oxu_hub_control(oxu_to_hcd(oxu), SetPortFeature,
+				USB_PORT_FEAT_POWER, port--, NULL, 0);
+		else
+			oxu_hub_control(oxu_to_hcd(oxu), ClearPortFeature,
+				USB_PORT_FEAT_POWER, port--, NULL, 0);
+	}
+
+	msleep(20);
+}
+
+/* Called from some interrupts, timers, and so on.
+ * It calls driver completion functions, after dropping oxu->lock.
+ */
+static void ehci_work(struct oxu_hcd *oxu)
+{
+	timer_action_done(oxu, TIMER_IO_WATCHDOG);
+	if (oxu->reclaim_ready)
+		end_unlink_async(oxu);
+
+	/* another CPU may drop oxu->lock during a schedule scan while
+	 * it reports urb completions.  this flag guards against bogus
+	 * attempts at re-entrant schedule scanning.
+	 */
+	if (oxu->scanning)
+		return;
+	oxu->scanning = 1;
+	scan_async(oxu);
+	if (oxu->next_uframe != -1)
+		scan_periodic(oxu);
+	oxu->scanning = 0;
+
+	/* the IO watchdog guards against hardware or driver bugs that
+	 * misplace IRQs, and should let us run completely without IRQs.
+	 * such lossage has been observed on both VT6202 and VT8235.
+	 */
+	if (HC_IS_RUNNING(oxu_to_hcd(oxu)->state) &&
+			(oxu->async->qh_next.ptr != NULL ||
+			 oxu->periodic_sched != 0))
+		timer_action(oxu, TIMER_IO_WATCHDOG);
+}
+
+static void unlink_async(struct oxu_hcd *oxu, struct ehci_qh *qh)
+{
+	/* if we need to use IAA and it's busy, defer */
+	if (qh->qh_state == QH_STATE_LINKED
+			&& oxu->reclaim
+			&& HC_IS_RUNNING(oxu_to_hcd(oxu)->state)) {
+		struct ehci_qh		*last;
+
+		for (last = oxu->reclaim;
+				last->reclaim;
+				last = last->reclaim)
+			continue;
+		qh->qh_state = QH_STATE_UNLINK_WAIT;
+		last->reclaim = qh;
+
+	/* bypass IAA if the hc can't care */
+	} else if (!HC_IS_RUNNING(oxu_to_hcd(oxu)->state) && oxu->reclaim)
+		end_unlink_async(oxu);
+
+	/* something else might have unlinked the qh by now */
+	if (qh->qh_state == QH_STATE_LINKED)
+		start_unlink_async(oxu, qh);
+}
+
+/*
+ * USB host controller methods
+ */
+
+static irqreturn_t oxu210_hcd_irq(struct usb_hcd *hcd)
+{
+	struct oxu_hcd *oxu = hcd_to_oxu(hcd);
+	u32 status, pcd_status = 0;
+	int bh;
+
+	spin_lock(&oxu->lock);
+
+	status = readl(&oxu->regs->status);
+
+	/* e.g. cardbus physical eject */
+	if (status == ~(u32) 0) {
+		oxu_dbg(oxu, "device removed\n");
+		goto dead;
+	}
+
+	/* Shared IRQ? */
+	status &= INTR_MASK;
+	if (!status || unlikely(hcd->state == HC_STATE_HALT)) {
+		spin_unlock(&oxu->lock);
+		return IRQ_NONE;
+	}
+
+	/* clear (just) interrupts */
+	writel(status, &oxu->regs->status);
+	readl(&oxu->regs->command);	/* unblock posted write */
+	bh = 0;
+
+#ifdef OXU_VERBOSE_DEBUG
+	/* unrequested/ignored: Frame List Rollover */
+	dbg_status(oxu, "irq", status);
+#endif
+
+	/* INT, ERR, and IAA interrupt rates can be throttled */
+
+	/* normal [4.15.1.2] or error [4.15.1.1] completion */
+	if (likely((status & (STS_INT|STS_ERR)) != 0))
+		bh = 1;
+
+	/* complete the unlinking of some qh [4.15.2.3] */
+	if (status & STS_IAA) {
+		oxu->reclaim_ready = 1;
+		bh = 1;
+	}
+
+	/* remote wakeup [4.3.1] */
+	if (status & STS_PCD) {
+		unsigned i = HCS_N_PORTS(oxu->hcs_params);
+		pcd_status = status;
+
+		/* resume root hub? */
+		if (!(readl(&oxu->regs->command) & CMD_RUN))
+			usb_hcd_resume_root_hub(hcd);
+
+		while (i--) {
+			int pstatus = readl(&oxu->regs->port_status[i]);
+
+			if (pstatus & PORT_OWNER)
+				continue;
+			if (!(pstatus & PORT_RESUME)
+					|| oxu->reset_done[i] != 0)
+				continue;
+
+			/* start USB_RESUME_TIMEOUT resume signaling from this
+			 * port, and make hub_wq collect PORT_STAT_C_SUSPEND to
+			 * stop that signaling.
+			 */
+			oxu->reset_done[i] = jiffies +
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
+			oxu_dbg(oxu, "port %d remote wakeup\n", i + 1);
+			mod_timer(&hcd->rh_timer, oxu->reset_done[i]);
+		}
+	}
+
+	/* PCI errors [4.15.2.4] */
+	if (unlikely((status & STS_FATAL) != 0)) {
+		/* bogus "fatal" IRQs appear on some chips... why?  */
+		status = readl(&oxu->regs->status);
+		dbg_cmd(oxu, "fatal", readl(&oxu->regs->command));
+		dbg_status(oxu, "fatal", status);
+		if (status & STS_HALT) {
+			oxu_err(oxu, "fatal error\n");
+dead:
+			ehci_reset(oxu);
+			writel(0, &oxu->regs->configured_flag);
+			usb_hc_died(hcd);
+			/* generic layer kills/unlinks all urbs, then
+			 * uses oxu_stop to clean up the rest
+			 */
+			bh = 1;
+		}
+	}
+
+	if (bh)
+		ehci_work(oxu);
+	spin_unlock(&oxu->lock);
+	if (pcd_status & STS_PCD)
+		usb_hcd_poll_rh_status(hcd);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t oxu_irq(struct usb_hcd *hcd)
+{
+	struct oxu_hcd *oxu = hcd_to_oxu(hcd);
+	int ret = IRQ_HANDLED;
+
+	u32 status = oxu_readl(hcd->regs, OXU_CHIPIRQSTATUS);
+	u32 enable = oxu_readl(hcd->regs, OXU_CHIPIRQEN_SET);
+
+	/* Disable all interrupt */
+	oxu_writel(hcd->regs, OXU_CHIPIRQEN_CLR, enable);
+
+	if ((oxu->is_otg && (status & OXU_USBOTGI)) ||
+		(!oxu->is_otg && (status & OXU_USBSPHI)))
+		oxu210_hcd_irq(hcd);
+	else
+		ret = IRQ_NONE;
+
+	/* Enable all interrupt back */
+	oxu_writel(hcd->regs, OXU_CHIPIRQEN_SET, enable);
+
+	return ret;
+}
+
+static void oxu_watchdog(struct timer_list *t)
+{
+	struct oxu_hcd	*oxu = from_timer(oxu, t, watchdog);
+	unsigned long flags;
+
+	spin_lock_irqsave(&oxu->lock, flags);
+
+	/* lost IAA irqs wedge things badly; seen with a vt8235 */
+	if (oxu->reclaim) {
+		u32 status = readl(&oxu->regs->status);
+		if (status & STS_IAA) {
+			oxu_vdbg(oxu, "lost IAA\n");
+			writel(STS_IAA, &oxu->regs->status);
+			oxu->reclaim_ready = 1;
+		}
+	}
+
+	/* stop async processing after it's idled a bit */
+	if (test_bit(TIMER_ASYNC_OFF, &oxu->actions))
+		start_unlink_async(oxu, oxu->async);
+
+	/* oxu could run by timer, without IRQs ... */
+	ehci_work(oxu);
+
+	spin_unlock_irqrestore(&oxu->lock, flags);
+}
+
+/* One-time init, only for memory state.
+ */
+static int oxu_hcd_init(struct usb_hcd *hcd)
+{
+	struct oxu_hcd *oxu = hcd_to_oxu(hcd);
+	u32 temp;
+	int retval;
+	u32 hcc_params;
+
+	spin_lock_init(&oxu->lock);
+
+	timer_setup(&oxu->watchdog, oxu_watchdog, 0);
+
+	/*
+	 * hw default: 1K periodic list heads, one per frame.
+	 * periodic_size can shrink by USBCMD update if hcc_params allows.
+	 */
+	oxu->periodic_size = DEFAULT_I_TDPS;
+	retval = ehci_mem_init(oxu, GFP_KERNEL);
+	if (retval < 0)
+		return retval;
+
+	/* controllers may cache some of the periodic schedule ... */
+	hcc_params = readl(&oxu->caps->hcc_params);
+	if (HCC_ISOC_CACHE(hcc_params))		/* full frame cache */
+		oxu->i_thresh = 8;
+	else					/* N microframes cached */
+		oxu->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
+
+	oxu->reclaim = NULL;
+	oxu->reclaim_ready = 0;
+	oxu->next_uframe = -1;
+
+	/*
+	 * dedicate a qh for the async ring head, since we couldn't unlink
+	 * a 'real' qh without stopping the async schedule [4.8].  use it
+	 * as the 'reclamation list head' too.
+	 * its dummy is used in hw_alt_next of many tds, to prevent the qh
+	 * from automatically advancing to the next td after short reads.
+	 */
+	oxu->async->qh_next.qh = NULL;
+	oxu->async->hw_next = QH_NEXT(oxu->async->qh_dma);
+	oxu->async->hw_info1 = cpu_to_le32(QH_HEAD);
+	oxu->async->hw_token = cpu_to_le32(QTD_STS_HALT);
+	oxu->async->hw_qtd_next = EHCI_LIST_END;
+	oxu->async->qh_state = QH_STATE_LINKED;
+	oxu->async->hw_alt_next = QTD_NEXT(oxu->async->dummy->qtd_dma);
+
+	/* clear interrupt enables, set irq latency */
+	if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
+		log2_irq_thresh = 0;
+	temp = 1 << (16 + log2_irq_thresh);
+	if (HCC_CANPARK(hcc_params)) {
+		/* HW default park == 3, on hardware that supports it (like
+		 * NVidia and ALI silicon), maximizes throughput on the async
+		 * schedule by avoiding QH fetches between transfers.
+		 *
+		 * With fast usb storage devices and NForce2, "park" seems to
+		 * make problems:  throughput reduction (!), data errors...
+		 */
+		if (park) {
+			park = min(park, (unsigned) 3);
+			temp |= CMD_PARK;
+			temp |= park << 8;
+		}
+		oxu_dbg(oxu, "park %d\n", park);
+	}
+	if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
+		/* periodic schedule size can be smaller than default */
+		temp &= ~(3 << 2);
+		temp |= (EHCI_TUNE_FLS << 2);
+	}
+	oxu->command = temp;
+
+	return 0;
+}
+
+/* Called during probe() after chip reset completes.
+ */
+static int oxu_reset(struct usb_hcd *hcd)
+{
+	struct oxu_hcd *oxu = hcd_to_oxu(hcd);
+
+	spin_lock_init(&oxu->mem_lock);
+	INIT_LIST_HEAD(&oxu->urb_list);
+	oxu->urb_len = 0;
+
+	if (oxu->is_otg) {
+		oxu->caps = hcd->regs + OXU_OTG_CAP_OFFSET;
+		oxu->regs = hcd->regs + OXU_OTG_CAP_OFFSET + \
+			HC_LENGTH(readl(&oxu->caps->hc_capbase));
+
+		oxu->mem = hcd->regs + OXU_SPH_MEM;
+	} else {
+		oxu->caps = hcd->regs + OXU_SPH_CAP_OFFSET;
+		oxu->regs = hcd->regs + OXU_SPH_CAP_OFFSET + \
+			HC_LENGTH(readl(&oxu->caps->hc_capbase));
+
+		oxu->mem = hcd->regs + OXU_OTG_MEM;
+	}
+
+	oxu->hcs_params = readl(&oxu->caps->hcs_params);
+	oxu->sbrn = 0x20;
+
+	return oxu_hcd_init(hcd);
+}
+
+static int oxu_run(struct usb_hcd *hcd)
+{
+	struct oxu_hcd *oxu = hcd_to_oxu(hcd);
+	int retval;
+	u32 temp, hcc_params;
+
+	hcd->uses_new_polling = 1;
+
+	/* EHCI spec section 4.1 */
+	retval = ehci_reset(oxu);
+	if (retval != 0) {
+		ehci_mem_cleanup(oxu);
+		return retval;
+	}
+	writel(oxu->periodic_dma, &oxu->regs->frame_list);
+	writel((u32) oxu->async->qh_dma, &oxu->regs->async_next);
+
+	/* hcc_params controls whether oxu->regs->segment must (!!!)
+	 * be used; it constrains QH/ITD/SITD and QTD locations.
+	 * dma_pool consistent memory always uses segment zero.
+	 * streaming mappings for I/O buffers, like dma_map_single(),
+	 * can return segments above 4GB, if the device allows.
+	 *
+	 * NOTE:  the dma mask is visible through dev->dma_mask, so
+	 * drivers can pass this info along ... like NETIF_F_HIGHDMA,
+	 * Scsi_Host.highmem_io, and so forth.  It's readonly to all
+	 * host side drivers though.
+	 */
+	hcc_params = readl(&oxu->caps->hcc_params);
+	if (HCC_64BIT_ADDR(hcc_params))
+		writel(0, &oxu->regs->segment);
+
+	oxu->command &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE |
+				CMD_ASE | CMD_RESET);
+	oxu->command |= CMD_RUN;
+	writel(oxu->command, &oxu->regs->command);
+	dbg_cmd(oxu, "init", oxu->command);
+
+	/*
+	 * Start, enabling full USB 2.0 functionality ... usb 1.1 devices
+	 * are explicitly handed to companion controller(s), so no TT is
+	 * involved with the root hub.  (Except where one is integrated,
+	 * and there's no companion controller unless maybe for USB OTG.)
+	 */
+	hcd->state = HC_STATE_RUNNING;
+	writel(FLAG_CF, &oxu->regs->configured_flag);
+	readl(&oxu->regs->command);	/* unblock posted writes */
+
+	temp = HC_VERSION(readl(&oxu->caps->hc_capbase));
+	oxu_info(oxu, "USB %x.%x started, quasi-EHCI %x.%02x, driver %s%s\n",
+		((oxu->sbrn & 0xf0)>>4), (oxu->sbrn & 0x0f),
+		temp >> 8, temp & 0xff, DRIVER_VERSION,
+		ignore_oc ? ", overcurrent ignored" : "");
+
+	writel(INTR_MASK, &oxu->regs->intr_enable); /* Turn On Interrupts */
+
+	return 0;
+}
+
+static void oxu_stop(struct usb_hcd *hcd)
+{
+	struct oxu_hcd *oxu = hcd_to_oxu(hcd);
+
+	/* Turn off port power on all root hub ports. */
+	ehci_port_power(oxu, 0);
+
+	/* no more interrupts ... */
+	del_timer_sync(&oxu->watchdog);
+
+	spin_lock_irq(&oxu->lock);
+	if (HC_IS_RUNNING(hcd->state))
+		ehci_quiesce(oxu);
+
+	ehci_reset(oxu);
+	writel(0, &oxu->regs->intr_enable);
+	spin_unlock_irq(&oxu->lock);
+
+	/* let companion controllers work when we aren't */
+	writel(0, &oxu->regs->configured_flag);
+
+	/* root hub is shut down separately (first, when possible) */
+	spin_lock_irq(&oxu->lock);
+	if (oxu->async)
+		ehci_work(oxu);
+	spin_unlock_irq(&oxu->lock);
+	ehci_mem_cleanup(oxu);
+
+	dbg_status(oxu, "oxu_stop completed", readl(&oxu->regs->status));
+}
+
+/* Kick in for silicon on any bus (not just pci, etc).
+ * This forcibly disables dma and IRQs, helping kexec and other cases
+ * where the next system software may expect clean state.
+ */
+static void oxu_shutdown(struct usb_hcd *hcd)
+{
+	struct oxu_hcd *oxu = hcd_to_oxu(hcd);
+
+	(void) ehci_halt(oxu);
+	ehci_turn_off_all_ports(oxu);
+
+	/* make BIOS/etc use companion controller during reboot */
+	writel(0, &oxu->regs->configured_flag);
+
+	/* unblock posted writes */
+	readl(&oxu->regs->configured_flag);
+}
+
+/* Non-error returns are a promise to giveback() the urb later
+ * we drop ownership so next owner (or urb unlink) can get it
+ *
+ * urb + dev is in hcd.self.controller.urb_list
+ * we're queueing TDs onto software and hardware lists
+ *
+ * hcd-specific init for hcpriv hasn't been done yet
+ *
+ * NOTE:  control, bulk, and interrupt share the same code to append TDs
+ * to a (possibly active) QH, and the same QH scanning code.
+ */
+static int __oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+				gfp_t mem_flags)
+{
+	struct oxu_hcd *oxu = hcd_to_oxu(hcd);
+	struct list_head qtd_list;
+
+	INIT_LIST_HEAD(&qtd_list);
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_CONTROL:
+	case PIPE_BULK:
+	default:
+		if (!qh_urb_transaction(oxu, urb, &qtd_list, mem_flags))
+			return -ENOMEM;
+		return submit_async(oxu, urb, &qtd_list, mem_flags);
+
+	case PIPE_INTERRUPT:
+		if (!qh_urb_transaction(oxu, urb, &qtd_list, mem_flags))
+			return -ENOMEM;
+		return intr_submit(oxu, urb, &qtd_list, mem_flags);
+
+	case PIPE_ISOCHRONOUS:
+		if (urb->dev->speed == USB_SPEED_HIGH)
+			return itd_submit(oxu, urb, mem_flags);
+		else
+			return sitd_submit(oxu, urb, mem_flags);
+	}
+}
+
+/* This function is responsible for breaking URBs with big data size
+ * into smaller size and processing small urbs in sequence.
+ */
+static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+				gfp_t mem_flags)
+{
+	struct oxu_hcd *oxu = hcd_to_oxu(hcd);
+	int num, rem;
+	void *transfer_buffer;
+	struct urb *murb;
+	int i, ret;
+
+	/* If not bulk pipe just enqueue the URB */
+	if (!usb_pipebulk(urb->pipe))
+		return __oxu_urb_enqueue(hcd, urb, mem_flags);
+
+	/* Otherwise we should verify the USB transfer buffer size! */
+	transfer_buffer = urb->transfer_buffer;
+
+	num = urb->transfer_buffer_length / 4096;
+	rem = urb->transfer_buffer_length % 4096;
+	if (rem != 0)
+		num++;
+
+	/* If URB is smaller than 4096 bytes just enqueue it! */
+	if (num == 1)
+		return __oxu_urb_enqueue(hcd, urb, mem_flags);
+
+	/* Ok, we have more job to do! :) */
+
+	for (i = 0; i < num - 1; i++) {
+		/* Get free micro URB poll till a free urb is received */
+
+		do {
+			murb = (struct urb *) oxu_murb_alloc(oxu);
+			if (!murb)
+				schedule();
+		} while (!murb);
+
+		/* Coping the urb */
+		memcpy(murb, urb, sizeof(struct urb));
+
+		murb->transfer_buffer_length = 4096;
+		murb->transfer_buffer = transfer_buffer + i * 4096;
+
+		/* Null pointer for the encodes that this is a micro urb */
+		murb->complete = NULL;
+
+		((struct oxu_murb *) murb)->main = urb;
+		((struct oxu_murb *) murb)->last = 0;
+
+		/* This loop is to guarantee urb to be processed when there's
+		 * not enough resources at a particular time by retrying.
+		 */
+		do {
+			ret  = __oxu_urb_enqueue(hcd, murb, mem_flags);
+			if (ret)
+				schedule();
+		} while (ret);
+	}
+
+	/* Last urb requires special handling  */
+
+	/* Get free micro URB poll till a free urb is received */
+	do {
+		murb = (struct urb *) oxu_murb_alloc(oxu);
+		if (!murb)
+			schedule();
+	} while (!murb);
+
+	/* Coping the urb */
+	memcpy(murb, urb, sizeof(struct urb));
+
+	murb->transfer_buffer_length = rem > 0 ? rem : 4096;
+	murb->transfer_buffer = transfer_buffer + (num - 1) * 4096;
+
+	/* Null pointer for the encodes that this is a micro urb */
+	murb->complete = NULL;
+
+	((struct oxu_murb *) murb)->main = urb;
+	((struct oxu_murb *) murb)->last = 1;
+
+	do {
+		ret = __oxu_urb_enqueue(hcd, murb, mem_flags);
+		if (ret)
+			schedule();
+	} while (ret);
+
+	return ret;
+}
+
+/* Remove from hardware lists.
+ * Completions normally happen asynchronously
+ */
+static int oxu_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct oxu_hcd *oxu = hcd_to_oxu(hcd);
+	struct ehci_qh *qh;
+	unsigned long flags;
+
+	spin_lock_irqsave(&oxu->lock, flags);
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_CONTROL:
+	case PIPE_BULK:
+	default:
+		qh = (struct ehci_qh *) urb->hcpriv;
+		if (!qh)
+			break;
+		unlink_async(oxu, qh);
+		break;
+
+	case PIPE_INTERRUPT:
+		qh = (struct ehci_qh *) urb->hcpriv;
+		if (!qh)
+			break;
+		switch (qh->qh_state) {
+		case QH_STATE_LINKED:
+			intr_deschedule(oxu, qh);
+			fallthrough;
+		case QH_STATE_IDLE:
+			qh_completions(oxu, qh);
+			break;
+		default:
+			oxu_dbg(oxu, "bogus qh %p state %d\n",
+					qh, qh->qh_state);
+			goto done;
+		}
+
+		/* reschedule QH iff another request is queued */
+		if (!list_empty(&qh->qtd_list)
+				&& HC_IS_RUNNING(hcd->state)) {
+			int status;
+
+			status = qh_schedule(oxu, qh);
+			spin_unlock_irqrestore(&oxu->lock, flags);
+
+			if (status != 0) {
+				/* shouldn't happen often, but ...
+				 * FIXME kill those tds' urbs
+				 */
+				dev_err(hcd->self.controller,
+					"can't reschedule qh %p, err %d\n", qh,
+					status);
+			}
+			return status;
+		}
+		break;
+	}
+done:
+	spin_unlock_irqrestore(&oxu->lock, flags);
+	return 0;
+}
+
+/* Bulk qh holds the data toggle */
+static void oxu_endpoint_disable(struct usb_hcd *hcd,
+					struct usb_host_endpoint *ep)
+{
+	struct oxu_hcd *oxu = hcd_to_oxu(hcd);
+	unsigned long		flags;
+	struct ehci_qh		*qh, *tmp;
+
+	/* ASSERT:  any requests/urbs are being unlinked */
+	/* ASSERT:  nobody can be submitting urbs for this any more */
+
+rescan:
+	spin_lock_irqsave(&oxu->lock, flags);
+	qh = ep->hcpriv;
+	if (!qh)
+		goto done;
+
+	/* endpoints can be iso streams.  for now, we don't
+	 * accelerate iso completions ... so spin a while.
+	 */
+	if (qh->hw_info1 == 0) {
+		oxu_vdbg(oxu, "iso delay\n");
+		goto idle_timeout;
+	}
+
+	if (!HC_IS_RUNNING(hcd->state))
+		qh->qh_state = QH_STATE_IDLE;
+	switch (qh->qh_state) {
+	case QH_STATE_LINKED:
+		for (tmp = oxu->async->qh_next.qh;
+				tmp && tmp != qh;
+				tmp = tmp->qh_next.qh)
+			continue;
+		/* periodic qh self-unlinks on empty */
+		if (!tmp)
+			goto nogood;
+		unlink_async(oxu, qh);
+		fallthrough;
+	case QH_STATE_UNLINK:		/* wait for hw to finish? */
+idle_timeout:
+		spin_unlock_irqrestore(&oxu->lock, flags);
+		schedule_timeout_uninterruptible(1);
+		goto rescan;
+	case QH_STATE_IDLE:		/* fully unlinked */
+		if (list_empty(&qh->qtd_list)) {
+			qh_put(qh);
+			break;
+		}
+		fallthrough;
+	default:
+nogood:
+		/* caller was supposed to have unlinked any requests;
+		 * that's not our job.  just leak this memory.
+		 */
+		oxu_err(oxu, "qh %p (#%02x) state %d%s\n",
+			qh, ep->desc.bEndpointAddress, qh->qh_state,
+			list_empty(&qh->qtd_list) ? "" : "(has tds)");
+		break;
+	}
+	ep->hcpriv = NULL;
+done:
+	spin_unlock_irqrestore(&oxu->lock, flags);
+}
+
+static int oxu_get_frame(struct usb_hcd *hcd)
+{
+	struct oxu_hcd *oxu = hcd_to_oxu(hcd);
+
+	return (readl(&oxu->regs->frame_index) >> 3) %
+		oxu->periodic_size;
+}
+
+/* Build "status change" packet (one or two bytes) from HC registers */
+static int oxu_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct oxu_hcd *oxu = hcd_to_oxu(hcd);
+	u32 temp, mask, status = 0;
+	int ports, i, retval = 1;
+	unsigned long flags;
+
+	/* if !PM, root hub timers won't get shut down ... */
+	if (!HC_IS_RUNNING(hcd->state))
+		return 0;
+
+	/* init status to no-changes */
+	buf[0] = 0;
+	ports = HCS_N_PORTS(oxu->hcs_params);
+	if (ports > 7) {
+		buf[1] = 0;
+		retval++;
+	}
+
+	/* Some boards (mostly VIA?) report bogus overcurrent indications,
+	 * causing massive log spam unless we completely ignore them.  It
+	 * may be relevant that VIA VT8235 controllers, where PORT_POWER is
+	 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
+	 * PORT_POWER; that's surprising, but maybe within-spec.
+	 */
+	if (!ignore_oc)
+		mask = PORT_CSC | PORT_PEC | PORT_OCC;
+	else
+		mask = PORT_CSC | PORT_PEC;
+
+	/* no hub change reports (bit 0) for now (power, ...) */
+
+	/* port N changes (bit N)? */
+	spin_lock_irqsave(&oxu->lock, flags);
+	for (i = 0; i < ports; i++) {
+		temp = readl(&oxu->regs->port_status[i]);
+
+		/*
+		 * Return status information even for ports with OWNER set.
+		 * Otherwise hub_wq wouldn't see the disconnect event when a
+		 * high-speed device is switched over to the companion
+		 * controller by the user.
+		 */
+
+		if (!(temp & PORT_CONNECT))
+			oxu->reset_done[i] = 0;
+		if ((temp & mask) != 0 || ((temp & PORT_RESUME) != 0 &&
+				time_after_eq(jiffies, oxu->reset_done[i]))) {
+			if (i < 7)
+				buf[0] |= 1 << (i + 1);
+			else
+				buf[1] |= 1 << (i - 7);
+			status = STS_PCD;
+		}
+	}
+	/* FIXME autosuspend idle root hubs */
+	spin_unlock_irqrestore(&oxu->lock, flags);
+	return status ? retval : 0;
+}
+
+/* Returns the speed of a device attached to a port on the root hub. */
+static inline unsigned int oxu_port_speed(struct oxu_hcd *oxu,
+						unsigned int portsc)
+{
+	switch ((portsc >> 26) & 3) {
+	case 0:
+		return 0;
+	case 1:
+		return USB_PORT_STAT_LOW_SPEED;
+	case 2:
+	default:
+		return USB_PORT_STAT_HIGH_SPEED;
+	}
+}
+
+#define	PORT_WAKE_BITS	(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
+static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
+				u16 wValue, u16 wIndex, char *buf, u16 wLength)
+{
+	struct oxu_hcd *oxu = hcd_to_oxu(hcd);
+	int ports = HCS_N_PORTS(oxu->hcs_params);
+	u32 __iomem *status_reg = &oxu->regs->port_status[wIndex - 1];
+	u32 temp, status;
+	unsigned long	flags;
+	int retval = 0;
+	unsigned selector;
+
+	/*
+	 * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
+	 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
+	 * (track current state ourselves) ... blink for diagnostics,
+	 * power, "this is the one", etc.  EHCI spec supports this.
+	 */
+
+	spin_lock_irqsave(&oxu->lock, flags);
+	switch (typeReq) {
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* no hub-wide feature/status flags */
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		temp = readl(status_reg);
+
+		/*
+		 * Even if OWNER is set, so the port is owned by the
+		 * companion controller, hub_wq needs to be able to clear
+		 * the port-change status bits (especially
+		 * USB_PORT_STAT_C_CONNECTION).
+		 */
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			writel(temp & ~PORT_PE, status_reg);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			writel((temp & ~PORT_RWC_BITS) | PORT_PEC, status_reg);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			if (temp & PORT_RESET)
+				goto error;
+			if (temp & PORT_SUSPEND) {
+				if ((temp & PORT_PE) == 0)
+					goto error;
+				/* resume signaling for 20 msec */
+				temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
+				writel(temp | PORT_RESUME, status_reg);
+				oxu->reset_done[wIndex] = jiffies
+						+ msecs_to_jiffies(20);
+			}
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			/* we auto-clear this feature */
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (HCS_PPC(oxu->hcs_params))
+				writel(temp & ~(PORT_RWC_BITS | PORT_POWER),
+					  status_reg);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			writel((temp & ~PORT_RWC_BITS) | PORT_CSC, status_reg);
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			writel((temp & ~PORT_RWC_BITS) | PORT_OCC, status_reg);
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			/* GetPortStatus clears reset */
+			break;
+		default:
+			goto error;
+		}
+		readl(&oxu->regs->command);	/* unblock posted write */
+		break;
+	case GetHubDescriptor:
+		ehci_hub_descriptor(oxu, (struct usb_hub_descriptor *)
+			buf);
+		break;
+	case GetHubStatus:
+		/* no hub-wide feature/status flags */
+		memset(buf, 0, 4);
+		break;
+	case GetPortStatus:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		status = 0;
+		temp = readl(status_reg);
+
+		/* wPortChange bits */
+		if (temp & PORT_CSC)
+			status |= USB_PORT_STAT_C_CONNECTION << 16;
+		if (temp & PORT_PEC)
+			status |= USB_PORT_STAT_C_ENABLE << 16;
+		if ((temp & PORT_OCC) && !ignore_oc)
+			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
+
+		/* whoever resumes must GetPortStatus to complete it!! */
+		if (temp & PORT_RESUME) {
+
+			/* Remote Wakeup received? */
+			if (!oxu->reset_done[wIndex]) {
+				/* resume signaling for 20 msec */
+				oxu->reset_done[wIndex] = jiffies
+						+ msecs_to_jiffies(20);
+				/* check the port again */
+				mod_timer(&oxu_to_hcd(oxu)->rh_timer,
+						oxu->reset_done[wIndex]);
+			}
+
+			/* resume completed? */
+			else if (time_after_eq(jiffies,
+					oxu->reset_done[wIndex])) {
+				status |= USB_PORT_STAT_C_SUSPEND << 16;
+				oxu->reset_done[wIndex] = 0;
+
+				/* stop resume signaling */
+				temp = readl(status_reg);
+				writel(temp & ~(PORT_RWC_BITS | PORT_RESUME),
+					status_reg);
+				retval = handshake(oxu, status_reg,
+					   PORT_RESUME, 0, 2000 /* 2msec */);
+				if (retval != 0) {
+					oxu_err(oxu,
+						"port %d resume error %d\n",
+						wIndex + 1, retval);
+					goto error;
+				}
+				temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
+			}
+		}
+
+		/* whoever resets must GetPortStatus to complete it!! */
+		if ((temp & PORT_RESET)
+				&& time_after_eq(jiffies,
+					oxu->reset_done[wIndex])) {
+			status |= USB_PORT_STAT_C_RESET << 16;
+			oxu->reset_done[wIndex] = 0;
+
+			/* force reset to complete */
+			writel(temp & ~(PORT_RWC_BITS | PORT_RESET),
+					status_reg);
+			/* REVISIT:  some hardware needs 550+ usec to clear
+			 * this bit; seems too long to spin routinely...
+			 */
+			retval = handshake(oxu, status_reg,
+					PORT_RESET, 0, 750);
+			if (retval != 0) {
+				oxu_err(oxu, "port %d reset error %d\n",
+					wIndex + 1, retval);
+				goto error;
+			}
+
+			/* see what we found out */
+			temp = check_reset_complete(oxu, wIndex, status_reg,
+					readl(status_reg));
+		}
+
+		/* transfer dedicated ports to the companion hc */
+		if ((temp & PORT_CONNECT) &&
+				test_bit(wIndex, &oxu->companion_ports)) {
+			temp &= ~PORT_RWC_BITS;
+			temp |= PORT_OWNER;
+			writel(temp, status_reg);
+			oxu_dbg(oxu, "port %d --> companion\n", wIndex + 1);
+			temp = readl(status_reg);
+		}
+
+		/*
+		 * Even if OWNER is set, there's no harm letting hub_wq
+		 * see the wPortStatus values (they should all be 0 except
+		 * for PORT_POWER anyway).
+		 */
+
+		if (temp & PORT_CONNECT) {
+			status |= USB_PORT_STAT_CONNECTION;
+			/* status may be from integrated TT */
+			status |= oxu_port_speed(oxu, temp);
+		}
+		if (temp & PORT_PE)
+			status |= USB_PORT_STAT_ENABLE;
+		if (temp & (PORT_SUSPEND|PORT_RESUME))
+			status |= USB_PORT_STAT_SUSPEND;
+		if (temp & PORT_OC)
+			status |= USB_PORT_STAT_OVERCURRENT;
+		if (temp & PORT_RESET)
+			status |= USB_PORT_STAT_RESET;
+		if (temp & PORT_POWER)
+			status |= USB_PORT_STAT_POWER;
+
+#ifndef	OXU_VERBOSE_DEBUG
+	if (status & ~0xffff)	/* only if wPortChange is interesting */
+#endif
+		dbg_port(oxu, "GetStatus", wIndex + 1, temp);
+		put_unaligned(cpu_to_le32(status), (__le32 *) buf);
+		break;
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* no hub-wide feature/status flags */
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetPortFeature:
+		selector = wIndex >> 8;
+		wIndex &= 0xff;
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		temp = readl(status_reg);
+		if (temp & PORT_OWNER)
+			break;
+
+		temp &= ~PORT_RWC_BITS;
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			if ((temp & PORT_PE) == 0
+					|| (temp & PORT_RESET) != 0)
+				goto error;
+			if (device_may_wakeup(&hcd->self.root_hub->dev))
+				temp |= PORT_WAKE_BITS;
+			writel(temp | PORT_SUSPEND, status_reg);
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (HCS_PPC(oxu->hcs_params))
+				writel(temp | PORT_POWER, status_reg);
+			break;
+		case USB_PORT_FEAT_RESET:
+			if (temp & PORT_RESUME)
+				goto error;
+			/* line status bits may report this as low speed,
+			 * which can be fine if this root hub has a
+			 * transaction translator built in.
+			 */
+			oxu_vdbg(oxu, "port %d reset\n", wIndex + 1);
+			temp |= PORT_RESET;
+			temp &= ~PORT_PE;
+
+			/*
+			 * caller must wait, then call GetPortStatus
+			 * usb 2.0 spec says 50 ms resets on root
+			 */
+			oxu->reset_done[wIndex] = jiffies
+					+ msecs_to_jiffies(50);
+			writel(temp, status_reg);
+			break;
+
+		/* For downstream facing ports (these):  one hub port is put
+		 * into test mode according to USB2 11.24.2.13, then the hub
+		 * must be reset (which for root hub now means rmmod+modprobe,
+		 * or else system reboot).  See EHCI 2.3.9 and 4.14 for info
+		 * about the EHCI-specific stuff.
+		 */
+		case USB_PORT_FEAT_TEST:
+			if (!selector || selector > 5)
+				goto error;
+			ehci_quiesce(oxu);
+			ehci_halt(oxu);
+			temp |= selector << 16;
+			writel(temp, status_reg);
+			break;
+
+		default:
+			goto error;
+		}
+		readl(&oxu->regs->command);	/* unblock posted writes */
+		break;
+
+	default:
+error:
+		/* "stall" on error */
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&oxu->lock, flags);
+	return retval;
+}
+
+#ifdef CONFIG_PM
+
+static int oxu_bus_suspend(struct usb_hcd *hcd)
+{
+	struct oxu_hcd *oxu = hcd_to_oxu(hcd);
+	int port;
+	int mask;
+
+	oxu_dbg(oxu, "suspend root hub\n");
+
+	if (time_before(jiffies, oxu->next_statechange))
+		msleep(5);
+
+	port = HCS_N_PORTS(oxu->hcs_params);
+	spin_lock_irq(&oxu->lock);
+
+	/* stop schedules, clean any completed work */
+	if (HC_IS_RUNNING(hcd->state)) {
+		ehci_quiesce(oxu);
+		hcd->state = HC_STATE_QUIESCING;
+	}
+	oxu->command = readl(&oxu->regs->command);
+	if (oxu->reclaim)
+		oxu->reclaim_ready = 1;
+	ehci_work(oxu);
+
+	/* Unlike other USB host controller types, EHCI doesn't have
+	 * any notion of "global" or bus-wide suspend.  The driver has
+	 * to manually suspend all the active unsuspended ports, and
+	 * then manually resume them in the bus_resume() routine.
+	 */
+	oxu->bus_suspended = 0;
+	while (port--) {
+		u32 __iomem *reg = &oxu->regs->port_status[port];
+		u32 t1 = readl(reg) & ~PORT_RWC_BITS;
+		u32 t2 = t1;
+
+		/* keep track of which ports we suspend */
+		if ((t1 & PORT_PE) && !(t1 & PORT_OWNER) &&
+				!(t1 & PORT_SUSPEND)) {
+			t2 |= PORT_SUSPEND;
+			set_bit(port, &oxu->bus_suspended);
+		}
+
+		/* enable remote wakeup on all ports */
+		if (device_may_wakeup(&hcd->self.root_hub->dev))
+			t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E;
+		else
+			t2 &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E);
+
+		if (t1 != t2) {
+			oxu_vdbg(oxu, "port %d, %08x -> %08x\n",
+				port + 1, t1, t2);
+			writel(t2, reg);
+		}
+	}
+
+	spin_unlock_irq(&oxu->lock);
+	/* turn off now-idle HC */
+	del_timer_sync(&oxu->watchdog);
+	spin_lock_irq(&oxu->lock);
+	ehci_halt(oxu);
+	hcd->state = HC_STATE_SUSPENDED;
+
+	/* allow remote wakeup */
+	mask = INTR_MASK;
+	if (!device_may_wakeup(&hcd->self.root_hub->dev))
+		mask &= ~STS_PCD;
+	writel(mask, &oxu->regs->intr_enable);
+	readl(&oxu->regs->intr_enable);
+
+	oxu->next_statechange = jiffies + msecs_to_jiffies(10);
+	spin_unlock_irq(&oxu->lock);
+	return 0;
+}
+
+/* Caller has locked the root hub, and should reset/reinit on error */
+static int oxu_bus_resume(struct usb_hcd *hcd)
+{
+	struct oxu_hcd *oxu = hcd_to_oxu(hcd);
+	u32 temp;
+	int i;
+
+	if (time_before(jiffies, oxu->next_statechange))
+		msleep(5);
+	spin_lock_irq(&oxu->lock);
+
+	/* Ideally and we've got a real resume here, and no port's power
+	 * was lost.  (For PCI, that means Vaux was maintained.)  But we
+	 * could instead be restoring a swsusp snapshot -- so that BIOS was
+	 * the last user of the controller, not reset/pm hardware keeping
+	 * state we gave to it.
+	 */
+	temp = readl(&oxu->regs->intr_enable);
+	oxu_dbg(oxu, "resume root hub%s\n", temp ? "" : " after power loss");
+
+	/* at least some APM implementations will try to deliver
+	 * IRQs right away, so delay them until we're ready.
+	 */
+	writel(0, &oxu->regs->intr_enable);
+
+	/* re-init operational registers */
+	writel(0, &oxu->regs->segment);
+	writel(oxu->periodic_dma, &oxu->regs->frame_list);
+	writel((u32) oxu->async->qh_dma, &oxu->regs->async_next);
+
+	/* restore CMD_RUN, framelist size, and irq threshold */
+	writel(oxu->command, &oxu->regs->command);
+
+	/* Some controller/firmware combinations need a delay during which
+	 * they set up the port statuses.  See Bugzilla #8190. */
+	mdelay(8);
+
+	/* manually resume the ports we suspended during bus_suspend() */
+	i = HCS_N_PORTS(oxu->hcs_params);
+	while (i--) {
+		temp = readl(&oxu->regs->port_status[i]);
+		temp &= ~(PORT_RWC_BITS
+			| PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E);
+		if (test_bit(i, &oxu->bus_suspended) && (temp & PORT_SUSPEND)) {
+			oxu->reset_done[i] = jiffies + msecs_to_jiffies(20);
+			temp |= PORT_RESUME;
+		}
+		writel(temp, &oxu->regs->port_status[i]);
+	}
+	i = HCS_N_PORTS(oxu->hcs_params);
+	mdelay(20);
+	while (i--) {
+		temp = readl(&oxu->regs->port_status[i]);
+		if (test_bit(i, &oxu->bus_suspended) && (temp & PORT_SUSPEND)) {
+			temp &= ~(PORT_RWC_BITS | PORT_RESUME);
+			writel(temp, &oxu->regs->port_status[i]);
+			oxu_vdbg(oxu, "resumed port %d\n", i + 1);
+		}
+	}
+	(void) readl(&oxu->regs->command);
+
+	/* maybe re-activate the schedule(s) */
+	temp = 0;
+	if (oxu->async->qh_next.qh)
+		temp |= CMD_ASE;
+	if (oxu->periodic_sched)
+		temp |= CMD_PSE;
+	if (temp) {
+		oxu->command |= temp;
+		writel(oxu->command, &oxu->regs->command);
+	}
+
+	oxu->next_statechange = jiffies + msecs_to_jiffies(5);
+	hcd->state = HC_STATE_RUNNING;
+
+	/* Now we can safely re-enable irqs */
+	writel(INTR_MASK, &oxu->regs->intr_enable);
+
+	spin_unlock_irq(&oxu->lock);
+	return 0;
+}
+
+#else
+
+static int oxu_bus_suspend(struct usb_hcd *hcd)
+{
+	return 0;
+}
+
+static int oxu_bus_resume(struct usb_hcd *hcd)
+{
+	return 0;
+}
+
+#endif	/* CONFIG_PM */
+
+static const struct hc_driver oxu_hc_driver = {
+	.description =		"oxu210hp_hcd",
+	.product_desc =		"oxu210hp HCD",
+	.hcd_priv_size =	sizeof(struct oxu_hcd),
+
+	/*
+	 * Generic hardware linkage
+	 */
+	.irq =			oxu_irq,
+	.flags =		HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * Basic lifecycle operations
+	 */
+	.reset =		oxu_reset,
+	.start =		oxu_run,
+	.stop =			oxu_stop,
+	.shutdown =		oxu_shutdown,
+
+	/*
+	 * Managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		oxu_urb_enqueue,
+	.urb_dequeue =		oxu_urb_dequeue,
+	.endpoint_disable =	oxu_endpoint_disable,
+
+	/*
+	 * Scheduling support
+	 */
+	.get_frame_number =	oxu_get_frame,
+
+	/*
+	 * Root hub support
+	 */
+	.hub_status_data =	oxu_hub_status_data,
+	.hub_control =		oxu_hub_control,
+	.bus_suspend =		oxu_bus_suspend,
+	.bus_resume =		oxu_bus_resume,
+};
+
+/*
+ * Module stuff
+ */
+
+static void oxu_configuration(struct platform_device *pdev, void __iomem *base)
+{
+	u32 tmp;
+
+	/* Initialize top level registers.
+	 * First write ever
+	 */
+	oxu_writel(base, OXU_HOSTIFCONFIG, 0x0000037D);
+	oxu_writel(base, OXU_SOFTRESET, OXU_SRESET);
+	oxu_writel(base, OXU_HOSTIFCONFIG, 0x0000037D);
+
+	tmp = oxu_readl(base, OXU_PIOBURSTREADCTRL);
+	oxu_writel(base, OXU_PIOBURSTREADCTRL, tmp | 0x0040);
+
+	oxu_writel(base, OXU_ASO, OXU_SPHPOEN | OXU_OVRCCURPUPDEN |
+					OXU_COMPARATOR | OXU_ASO_OP);
+
+	tmp = oxu_readl(base, OXU_CLKCTRL_SET);
+	oxu_writel(base, OXU_CLKCTRL_SET, tmp | OXU_SYSCLKEN | OXU_USBOTGCLKEN);
+
+	/* Clear all top interrupt enable */
+	oxu_writel(base, OXU_CHIPIRQEN_CLR, 0xff);
+
+	/* Clear all top interrupt status */
+	oxu_writel(base, OXU_CHIPIRQSTATUS, 0xff);
+
+	/* Enable all needed top interrupt except OTG SPH core */
+	oxu_writel(base, OXU_CHIPIRQEN_SET, OXU_USBSPHLPWUI | OXU_USBOTGLPWUI);
+}
+
+static int oxu_verify_id(struct platform_device *pdev, void __iomem *base)
+{
+	u32 id;
+	static const char * const bo[] = {
+		"reserved",
+		"128-pin LQFP",
+		"84-pin TFBGA",
+		"reserved",
+	};
+
+	/* Read controller signature register to find a match */
+	id = oxu_readl(base, OXU_DEVICEID);
+	dev_info(&pdev->dev, "device ID %x\n", id);
+	if ((id & OXU_REV_MASK) != (OXU_REV_2100 << OXU_REV_SHIFT))
+		return -1;
+
+	dev_info(&pdev->dev, "found device %x %s (%04x:%04x)\n",
+		id >> OXU_REV_SHIFT,
+		bo[(id & OXU_BO_MASK) >> OXU_BO_SHIFT],
+		(id & OXU_MAJ_REV_MASK) >> OXU_MAJ_REV_SHIFT,
+		(id & OXU_MIN_REV_MASK) >> OXU_MIN_REV_SHIFT);
+
+	return 0;
+}
+
+static const struct hc_driver oxu_hc_driver;
+static struct usb_hcd *oxu_create(struct platform_device *pdev,
+				unsigned long memstart, unsigned long memlen,
+				void __iomem *base, int irq, int otg)
+{
+	struct device *dev = &pdev->dev;
+
+	struct usb_hcd *hcd;
+	struct oxu_hcd *oxu;
+	int ret;
+
+	/* Set endian mode and host mode */
+	oxu_writel(base + (otg ? OXU_OTG_CORE_OFFSET : OXU_SPH_CORE_OFFSET),
+				OXU_USBMODE,
+				OXU_CM_HOST_ONLY | OXU_ES_LITTLE | OXU_VBPS);
+
+	hcd = usb_create_hcd(&oxu_hc_driver, dev,
+				otg ? "oxu210hp_otg" : "oxu210hp_sph");
+	if (!hcd)
+		return ERR_PTR(-ENOMEM);
+
+	hcd->rsrc_start = memstart;
+	hcd->rsrc_len = memlen;
+	hcd->regs = base;
+	hcd->irq = irq;
+	hcd->state = HC_STATE_HALT;
+
+	oxu = hcd_to_oxu(hcd);
+	oxu->is_otg = otg;
+
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (ret < 0) {
+		usb_put_hcd(hcd);
+		return ERR_PTR(ret);
+	}
+
+	device_wakeup_enable(hcd->self.controller);
+	return hcd;
+}
+
+static int oxu_init(struct platform_device *pdev,
+				unsigned long memstart, unsigned long memlen,
+				void __iomem *base, int irq)
+{
+	struct oxu_info *info = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd;
+	int ret;
+
+	/* First time configuration at start up */
+	oxu_configuration(pdev, base);
+
+	ret = oxu_verify_id(pdev, base);
+	if (ret) {
+		dev_err(&pdev->dev, "no devices found!\n");
+		return -ENODEV;
+	}
+
+	/* Create the OTG controller */
+	hcd = oxu_create(pdev, memstart, memlen, base, irq, 1);
+	if (IS_ERR(hcd)) {
+		dev_err(&pdev->dev, "cannot create OTG controller!\n");
+		ret = PTR_ERR(hcd);
+		goto error_create_otg;
+	}
+	info->hcd[0] = hcd;
+
+	/* Create the SPH host controller */
+	hcd = oxu_create(pdev, memstart, memlen, base, irq, 0);
+	if (IS_ERR(hcd)) {
+		dev_err(&pdev->dev, "cannot create SPH controller!\n");
+		ret = PTR_ERR(hcd);
+		goto error_create_sph;
+	}
+	info->hcd[1] = hcd;
+
+	oxu_writel(base, OXU_CHIPIRQEN_SET,
+		oxu_readl(base, OXU_CHIPIRQEN_SET) | 3);
+
+	return 0;
+
+error_create_sph:
+	usb_remove_hcd(info->hcd[0]);
+	usb_put_hcd(info->hcd[0]);
+
+error_create_otg:
+	return ret;
+}
+
+static int oxu_drv_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *base;
+	unsigned long memstart, memlen;
+	int irq, ret;
+	struct oxu_info *info;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	/*
+	 * Get the platform resources
+	 */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+	dev_dbg(&pdev->dev, "IRQ resource %d\n", irq);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base)) {
+		ret = PTR_ERR(base);
+		goto error;
+	}
+	memstart = res->start;
+	memlen = resource_size(res);
+
+	ret = irq_set_irq_type(irq, IRQF_TRIGGER_FALLING);
+	if (ret) {
+		dev_err(&pdev->dev, "error setting irq type\n");
+		ret = -EFAULT;
+		goto error;
+	}
+
+	/* Allocate a driver data struct to hold useful info for both
+	 * SPH & OTG devices
+	 */
+	info = devm_kzalloc(&pdev->dev, sizeof(struct oxu_info), GFP_KERNEL);
+	if (!info) {
+		ret = -EFAULT;
+		goto error;
+	}
+	platform_set_drvdata(pdev, info);
+
+	ret = oxu_init(pdev, memstart, memlen, base, irq);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "cannot init USB devices\n");
+		goto error;
+	}
+
+	dev_info(&pdev->dev, "devices enabled and running\n");
+	platform_set_drvdata(pdev, info);
+
+	return 0;
+
+error:
+	dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), ret);
+	return ret;
+}
+
+static void oxu_remove(struct platform_device *pdev, struct usb_hcd *hcd)
+{
+	usb_remove_hcd(hcd);
+	usb_put_hcd(hcd);
+}
+
+static int oxu_drv_remove(struct platform_device *pdev)
+{
+	struct oxu_info *info = platform_get_drvdata(pdev);
+
+	oxu_remove(pdev, info->hcd[0]);
+	oxu_remove(pdev, info->hcd[1]);
+
+	return 0;
+}
+
+static void oxu_drv_shutdown(struct platform_device *pdev)
+{
+	oxu_drv_remove(pdev);
+}
+
+#if 0
+/* FIXME: TODO */
+static int oxu_drv_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	return 0;
+}
+
+static int oxu_drv_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	return 0;
+}
+#else
+#define oxu_drv_suspend	NULL
+#define oxu_drv_resume	NULL
+#endif
+
+static struct platform_driver oxu_driver = {
+	.probe		= oxu_drv_probe,
+	.remove		= oxu_drv_remove,
+	.shutdown	= oxu_drv_shutdown,
+	.suspend	= oxu_drv_suspend,
+	.resume		= oxu_drv_resume,
+	.driver = {
+		.name = "oxu210hp-hcd",
+		.bus = &platform_bus_type
+	}
+};
+
+module_platform_driver(oxu_driver);
+
+MODULE_DESCRIPTION("Oxford OXU210HP HCD driver - ver. " DRIVER_VERSION);
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
new file mode 100644
index 000000000..ef08d68b9
--- /dev/null
+++ b/drivers/usb/host/pci-quirks.c
@@ -0,0 +1,1287 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file contains code to reset and initialize USB host controllers.
+ * Some of it includes work-arounds for PCI hardware and BIOS quirks.
+ * It may need to run early during booting -- before USB would normally
+ * initialize -- to ensure that Linux doesn't use any legacy modes.
+ *
+ *  Copyright (c) 1999 Martin Mares <mj@ucw.cz>
+ *  (and others)
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/of.h>
+#include <linux/iopoll.h>
+
+#include "pci-quirks.h"
+#include "xhci-ext-caps.h"
+
+
+#define UHCI_USBLEGSUP		0xc0		/* legacy support */
+#define UHCI_USBCMD		0		/* command register */
+#define UHCI_USBINTR		4		/* interrupt register */
+#define UHCI_USBLEGSUP_RWC	0x8f00		/* the R/WC bits */
+#define UHCI_USBLEGSUP_RO	0x5040		/* R/O and reserved bits */
+#define UHCI_USBCMD_RUN		0x0001		/* RUN/STOP bit */
+#define UHCI_USBCMD_HCRESET	0x0002		/* Host Controller reset */
+#define UHCI_USBCMD_EGSM	0x0008		/* Global Suspend Mode */
+#define UHCI_USBCMD_CONFIGURE	0x0040		/* Config Flag */
+#define UHCI_USBINTR_RESUME	0x0002		/* Resume interrupt enable */
+
+#define OHCI_CONTROL		0x04
+#define OHCI_CMDSTATUS		0x08
+#define OHCI_INTRSTATUS		0x0c
+#define OHCI_INTRENABLE		0x10
+#define OHCI_INTRDISABLE	0x14
+#define OHCI_FMINTERVAL		0x34
+#define OHCI_HCFS		(3 << 6)	/* hc functional state */
+#define OHCI_HCR		(1 << 0)	/* host controller reset */
+#define OHCI_OCR		(1 << 3)	/* ownership change request */
+#define OHCI_CTRL_RWC		(1 << 9)	/* remote wakeup connected */
+#define OHCI_CTRL_IR		(1 << 8)	/* interrupt routing */
+#define OHCI_INTR_OC		(1 << 30)	/* ownership change */
+
+#define EHCI_HCC_PARAMS		0x08		/* extended capabilities */
+#define EHCI_USBCMD		0		/* command register */
+#define EHCI_USBCMD_RUN		(1 << 0)	/* RUN/STOP bit */
+#define EHCI_USBSTS		4		/* status register */
+#define EHCI_USBSTS_HALTED	(1 << 12)	/* HCHalted bit */
+#define EHCI_USBINTR		8		/* interrupt register */
+#define EHCI_CONFIGFLAG		0x40		/* configured flag register */
+#define EHCI_USBLEGSUP		0		/* legacy support register */
+#define EHCI_USBLEGSUP_BIOS	(1 << 16)	/* BIOS semaphore */
+#define EHCI_USBLEGSUP_OS	(1 << 24)	/* OS semaphore */
+#define EHCI_USBLEGCTLSTS	4		/* legacy control/status */
+#define EHCI_USBLEGCTLSTS_SOOE	(1 << 13)	/* SMI on ownership change */
+
+/* AMD quirk use */
+#define	AB_REG_BAR_LOW		0xe0
+#define	AB_REG_BAR_HIGH		0xe1
+#define	AB_REG_BAR_SB700	0xf0
+#define	AB_INDX(addr)		((addr) + 0x00)
+#define	AB_DATA(addr)		((addr) + 0x04)
+#define	AX_INDXC		0x30
+#define	AX_DATAC		0x34
+
+#define PT_ADDR_INDX		0xE8
+#define PT_READ_INDX		0xE4
+#define PT_SIG_1_ADDR		0xA520
+#define PT_SIG_2_ADDR		0xA521
+#define PT_SIG_3_ADDR		0xA522
+#define PT_SIG_4_ADDR		0xA523
+#define PT_SIG_1_DATA		0x78
+#define PT_SIG_2_DATA		0x56
+#define PT_SIG_3_DATA		0x34
+#define PT_SIG_4_DATA		0x12
+#define PT4_P1_REG		0xB521
+#define PT4_P2_REG		0xB522
+#define PT2_P1_REG		0xD520
+#define PT2_P2_REG		0xD521
+#define PT1_P1_REG		0xD522
+#define PT1_P2_REG		0xD523
+
+#define	NB_PCIE_INDX_ADDR	0xe0
+#define	NB_PCIE_INDX_DATA	0xe4
+#define	PCIE_P_CNTL		0x10040
+#define	BIF_NB			0x10002
+#define	NB_PIF0_PWRDOWN_0	0x01100012
+#define	NB_PIF0_PWRDOWN_1	0x01100013
+
+#define USB_INTEL_XUSB2PR      0xD0
+#define USB_INTEL_USB2PRM      0xD4
+#define USB_INTEL_USB3_PSSEN   0xD8
+#define USB_INTEL_USB3PRM      0xDC
+
+/* ASMEDIA quirk use */
+#define ASMT_DATA_WRITE0_REG	0xF8
+#define ASMT_DATA_WRITE1_REG	0xFC
+#define ASMT_CONTROL_REG	0xE0
+#define ASMT_CONTROL_WRITE_BIT	0x02
+#define ASMT_WRITEREG_CMD	0x10423
+#define ASMT_FLOWCTL_ADDR	0xFA30
+#define ASMT_FLOWCTL_DATA	0xBA
+#define ASMT_PSEUDO_DATA	0
+
+/*
+ * amd_chipset_gen values represent AMD different chipset generations
+ */
+enum amd_chipset_gen {
+	NOT_AMD_CHIPSET = 0,
+	AMD_CHIPSET_SB600,
+	AMD_CHIPSET_SB700,
+	AMD_CHIPSET_SB800,
+	AMD_CHIPSET_HUDSON2,
+	AMD_CHIPSET_BOLTON,
+	AMD_CHIPSET_YANGTZE,
+	AMD_CHIPSET_TAISHAN,
+	AMD_CHIPSET_UNKNOWN,
+};
+
+struct amd_chipset_type {
+	enum amd_chipset_gen gen;
+	u8 rev;
+};
+
+static struct amd_chipset_info {
+	struct pci_dev	*nb_dev;
+	struct pci_dev	*smbus_dev;
+	int nb_type;
+	struct amd_chipset_type sb_type;
+	int isoc_reqs;
+	int probe_count;
+	bool need_pll_quirk;
+} amd_chipset;
+
+static DEFINE_SPINLOCK(amd_lock);
+
+/*
+ * amd_chipset_sb_type_init - initialize amd chipset southbridge type
+ *
+ * AMD FCH/SB generation and revision is identified by SMBus controller
+ * vendor, device and revision IDs.
+ *
+ * Returns: 1 if it is an AMD chipset, 0 otherwise.
+ */
+static int amd_chipset_sb_type_init(struct amd_chipset_info *pinfo)
+{
+	u8 rev = 0;
+	pinfo->sb_type.gen = AMD_CHIPSET_UNKNOWN;
+
+	pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
+			PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
+	if (pinfo->smbus_dev) {
+		rev = pinfo->smbus_dev->revision;
+		if (rev >= 0x10 && rev <= 0x1f)
+			pinfo->sb_type.gen = AMD_CHIPSET_SB600;
+		else if (rev >= 0x30 && rev <= 0x3f)
+			pinfo->sb_type.gen = AMD_CHIPSET_SB700;
+		else if (rev >= 0x40 && rev <= 0x4f)
+			pinfo->sb_type.gen = AMD_CHIPSET_SB800;
+	} else {
+		pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+				PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL);
+
+		if (pinfo->smbus_dev) {
+			rev = pinfo->smbus_dev->revision;
+			if (rev >= 0x11 && rev <= 0x14)
+				pinfo->sb_type.gen = AMD_CHIPSET_HUDSON2;
+			else if (rev >= 0x15 && rev <= 0x18)
+				pinfo->sb_type.gen = AMD_CHIPSET_BOLTON;
+			else if (rev >= 0x39 && rev <= 0x3a)
+				pinfo->sb_type.gen = AMD_CHIPSET_YANGTZE;
+		} else {
+			pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+							  0x145c, NULL);
+			if (pinfo->smbus_dev) {
+				rev = pinfo->smbus_dev->revision;
+				pinfo->sb_type.gen = AMD_CHIPSET_TAISHAN;
+			} else {
+				pinfo->sb_type.gen = NOT_AMD_CHIPSET;
+				return 0;
+			}
+		}
+	}
+	pinfo->sb_type.rev = rev;
+	return 1;
+}
+
+void sb800_prefetch(struct device *dev, int on)
+{
+	u16 misc;
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	pci_read_config_word(pdev, 0x50, &misc);
+	if (on == 0)
+		pci_write_config_word(pdev, 0x50, misc & 0xfcff);
+	else
+		pci_write_config_word(pdev, 0x50, misc | 0x0300);
+}
+EXPORT_SYMBOL_GPL(sb800_prefetch);
+
+static void usb_amd_find_chipset_info(void)
+{
+	unsigned long flags;
+	struct amd_chipset_info info;
+	info.need_pll_quirk = false;
+
+	spin_lock_irqsave(&amd_lock, flags);
+
+	/* probe only once */
+	if (amd_chipset.probe_count > 0) {
+		amd_chipset.probe_count++;
+		spin_unlock_irqrestore(&amd_lock, flags);
+		return;
+	}
+	memset(&info, 0, sizeof(info));
+	spin_unlock_irqrestore(&amd_lock, flags);
+
+	if (!amd_chipset_sb_type_init(&info)) {
+		goto commit;
+	}
+
+	switch (info.sb_type.gen) {
+	case AMD_CHIPSET_SB700:
+		info.need_pll_quirk = info.sb_type.rev <= 0x3B;
+		break;
+	case AMD_CHIPSET_SB800:
+	case AMD_CHIPSET_HUDSON2:
+	case AMD_CHIPSET_BOLTON:
+		info.need_pll_quirk = true;
+		break;
+	default:
+		info.need_pll_quirk = false;
+		break;
+	}
+
+	if (!info.need_pll_quirk) {
+		if (info.smbus_dev) {
+			pci_dev_put(info.smbus_dev);
+			info.smbus_dev = NULL;
+		}
+		goto commit;
+	}
+
+	info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL);
+	if (info.nb_dev) {
+		info.nb_type = 1;
+	} else {
+		info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
+		if (info.nb_dev) {
+			info.nb_type = 2;
+		} else {
+			info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+						     0x9600, NULL);
+			if (info.nb_dev)
+				info.nb_type = 3;
+		}
+	}
+
+	printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n");
+
+commit:
+
+	spin_lock_irqsave(&amd_lock, flags);
+	if (amd_chipset.probe_count > 0) {
+		/* race - someone else was faster - drop devices */
+
+		/* Mark that we where here */
+		amd_chipset.probe_count++;
+
+		spin_unlock_irqrestore(&amd_lock, flags);
+
+		pci_dev_put(info.nb_dev);
+		pci_dev_put(info.smbus_dev);
+
+	} else {
+		/* no race - commit the result */
+		info.probe_count++;
+		amd_chipset = info;
+		spin_unlock_irqrestore(&amd_lock, flags);
+	}
+}
+
+int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev)
+{
+	/* Make sure amd chipset type has already been initialized */
+	usb_amd_find_chipset_info();
+	if (amd_chipset.sb_type.gen == AMD_CHIPSET_YANGTZE ||
+	    amd_chipset.sb_type.gen == AMD_CHIPSET_TAISHAN) {
+		dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n");
+		return 1;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_amd_remote_wakeup_quirk);
+
+bool usb_amd_hang_symptom_quirk(void)
+{
+	u8 rev;
+
+	usb_amd_find_chipset_info();
+	rev = amd_chipset.sb_type.rev;
+	/* SB600 and old version of SB700 have hang symptom bug */
+	return amd_chipset.sb_type.gen == AMD_CHIPSET_SB600 ||
+			(amd_chipset.sb_type.gen == AMD_CHIPSET_SB700 &&
+			 rev >= 0x3a && rev <= 0x3b);
+}
+EXPORT_SYMBOL_GPL(usb_amd_hang_symptom_quirk);
+
+bool usb_amd_prefetch_quirk(void)
+{
+	usb_amd_find_chipset_info();
+	/* SB800 needs pre-fetch fix */
+	return amd_chipset.sb_type.gen == AMD_CHIPSET_SB800;
+}
+EXPORT_SYMBOL_GPL(usb_amd_prefetch_quirk);
+
+bool usb_amd_quirk_pll_check(void)
+{
+	usb_amd_find_chipset_info();
+	return amd_chipset.need_pll_quirk;
+}
+EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_check);
+
+/*
+ * The hardware normally enables the A-link power management feature, which
+ * lets the system lower the power consumption in idle states.
+ *
+ * This USB quirk prevents the link going into that lower power state
+ * during isochronous transfers.
+ *
+ * Without this quirk, isochronous stream on OHCI/EHCI/xHCI controllers of
+ * some AMD platforms may stutter or have breaks occasionally.
+ */
+static void usb_amd_quirk_pll(int disable)
+{
+	u32 addr, addr_low, addr_high, val;
+	u32 bit = disable ? 0 : 1;
+	unsigned long flags;
+
+	spin_lock_irqsave(&amd_lock, flags);
+
+	if (disable) {
+		amd_chipset.isoc_reqs++;
+		if (amd_chipset.isoc_reqs > 1) {
+			spin_unlock_irqrestore(&amd_lock, flags);
+			return;
+		}
+	} else {
+		amd_chipset.isoc_reqs--;
+		if (amd_chipset.isoc_reqs > 0) {
+			spin_unlock_irqrestore(&amd_lock, flags);
+			return;
+		}
+	}
+
+	if (amd_chipset.sb_type.gen == AMD_CHIPSET_SB800 ||
+			amd_chipset.sb_type.gen == AMD_CHIPSET_HUDSON2 ||
+			amd_chipset.sb_type.gen == AMD_CHIPSET_BOLTON) {
+		outb_p(AB_REG_BAR_LOW, 0xcd6);
+		addr_low = inb_p(0xcd7);
+		outb_p(AB_REG_BAR_HIGH, 0xcd6);
+		addr_high = inb_p(0xcd7);
+		addr = addr_high << 8 | addr_low;
+
+		outl_p(0x30, AB_INDX(addr));
+		outl_p(0x40, AB_DATA(addr));
+		outl_p(0x34, AB_INDX(addr));
+		val = inl_p(AB_DATA(addr));
+	} else if (amd_chipset.sb_type.gen == AMD_CHIPSET_SB700 &&
+			amd_chipset.sb_type.rev <= 0x3b) {
+		pci_read_config_dword(amd_chipset.smbus_dev,
+					AB_REG_BAR_SB700, &addr);
+		outl(AX_INDXC, AB_INDX(addr));
+		outl(0x40, AB_DATA(addr));
+		outl(AX_DATAC, AB_INDX(addr));
+		val = inl(AB_DATA(addr));
+	} else {
+		spin_unlock_irqrestore(&amd_lock, flags);
+		return;
+	}
+
+	if (disable) {
+		val &= ~0x08;
+		val |= (1 << 4) | (1 << 9);
+	} else {
+		val |= 0x08;
+		val &= ~((1 << 4) | (1 << 9));
+	}
+	outl_p(val, AB_DATA(addr));
+
+	if (!amd_chipset.nb_dev) {
+		spin_unlock_irqrestore(&amd_lock, flags);
+		return;
+	}
+
+	if (amd_chipset.nb_type == 1 || amd_chipset.nb_type == 3) {
+		addr = PCIE_P_CNTL;
+		pci_write_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_ADDR, addr);
+		pci_read_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_DATA, &val);
+
+		val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12));
+		val |= bit | (bit << 3) | (bit << 12);
+		val |= ((!bit) << 4) | ((!bit) << 9);
+		pci_write_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_DATA, val);
+
+		addr = BIF_NB;
+		pci_write_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_ADDR, addr);
+		pci_read_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_DATA, &val);
+		val &= ~(1 << 8);
+		val |= bit << 8;
+
+		pci_write_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_DATA, val);
+	} else if (amd_chipset.nb_type == 2) {
+		addr = NB_PIF0_PWRDOWN_0;
+		pci_write_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_ADDR, addr);
+		pci_read_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_DATA, &val);
+		if (disable)
+			val &= ~(0x3f << 7);
+		else
+			val |= 0x3f << 7;
+
+		pci_write_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_DATA, val);
+
+		addr = NB_PIF0_PWRDOWN_1;
+		pci_write_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_ADDR, addr);
+		pci_read_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_DATA, &val);
+		if (disable)
+			val &= ~(0x3f << 7);
+		else
+			val |= 0x3f << 7;
+
+		pci_write_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_DATA, val);
+	}
+
+	spin_unlock_irqrestore(&amd_lock, flags);
+	return;
+}
+
+void usb_amd_quirk_pll_disable(void)
+{
+	usb_amd_quirk_pll(1);
+}
+EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
+
+static int usb_asmedia_wait_write(struct pci_dev *pdev)
+{
+	unsigned long retry_count;
+	unsigned char value;
+
+	for (retry_count = 1000; retry_count > 0; --retry_count) {
+
+		pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
+
+		if (value == 0xff) {
+			dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
+			return -EIO;
+		}
+
+		if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
+			return 0;
+
+		udelay(50);
+	}
+
+	dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
+	return -ETIMEDOUT;
+}
+
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
+{
+	if (usb_asmedia_wait_write(pdev) != 0)
+		return;
+
+	/* send command and address to device */
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
+	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+
+	if (usb_asmedia_wait_write(pdev) != 0)
+		return;
+
+	/* send data to device */
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
+	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+}
+EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+
+void usb_amd_quirk_pll_enable(void)
+{
+	usb_amd_quirk_pll(0);
+}
+EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_enable);
+
+void usb_amd_dev_put(void)
+{
+	struct pci_dev *nb, *smbus;
+	unsigned long flags;
+
+	spin_lock_irqsave(&amd_lock, flags);
+
+	amd_chipset.probe_count--;
+	if (amd_chipset.probe_count > 0) {
+		spin_unlock_irqrestore(&amd_lock, flags);
+		return;
+	}
+
+	/* save them to pci_dev_put outside of spinlock */
+	nb    = amd_chipset.nb_dev;
+	smbus = amd_chipset.smbus_dev;
+
+	amd_chipset.nb_dev = NULL;
+	amd_chipset.smbus_dev = NULL;
+	amd_chipset.nb_type = 0;
+	memset(&amd_chipset.sb_type, 0, sizeof(amd_chipset.sb_type));
+	amd_chipset.isoc_reqs = 0;
+	amd_chipset.need_pll_quirk = false;
+
+	spin_unlock_irqrestore(&amd_lock, flags);
+
+	pci_dev_put(nb);
+	pci_dev_put(smbus);
+}
+EXPORT_SYMBOL_GPL(usb_amd_dev_put);
+
+/*
+ * Check if port is disabled in BIOS on AMD Promontory host.
+ * BIOS Disabled ports may wake on connect/disconnect and need
+ * driver workaround to keep them disabled.
+ * Returns true if port is marked disabled.
+ */
+bool usb_amd_pt_check_port(struct device *device, int port)
+{
+	unsigned char value, port_shift;
+	struct pci_dev *pdev;
+	u16 reg;
+
+	pdev = to_pci_dev(device);
+	pci_write_config_word(pdev, PT_ADDR_INDX, PT_SIG_1_ADDR);
+
+	pci_read_config_byte(pdev, PT_READ_INDX, &value);
+	if (value != PT_SIG_1_DATA)
+		return false;
+
+	pci_write_config_word(pdev, PT_ADDR_INDX, PT_SIG_2_ADDR);
+
+	pci_read_config_byte(pdev, PT_READ_INDX, &value);
+	if (value != PT_SIG_2_DATA)
+		return false;
+
+	pci_write_config_word(pdev, PT_ADDR_INDX, PT_SIG_3_ADDR);
+
+	pci_read_config_byte(pdev, PT_READ_INDX, &value);
+	if (value != PT_SIG_3_DATA)
+		return false;
+
+	pci_write_config_word(pdev, PT_ADDR_INDX, PT_SIG_4_ADDR);
+
+	pci_read_config_byte(pdev, PT_READ_INDX, &value);
+	if (value != PT_SIG_4_DATA)
+		return false;
+
+	/* Check disabled port setting, if bit is set port is enabled */
+	switch (pdev->device) {
+	case 0x43b9:
+	case 0x43ba:
+	/*
+	 * device is AMD_PROMONTORYA_4(0x43b9) or PROMONTORYA_3(0x43ba)
+	 * PT4_P1_REG bits[7..1] represents USB2.0 ports 6 to 0
+	 * PT4_P2_REG bits[6..0] represents ports 13 to 7
+	 */
+		if (port > 6) {
+			reg = PT4_P2_REG;
+			port_shift = port - 7;
+		} else {
+			reg = PT4_P1_REG;
+			port_shift = port + 1;
+		}
+		break;
+	case 0x43bb:
+	/*
+	 * device is AMD_PROMONTORYA_2(0x43bb)
+	 * PT2_P1_REG bits[7..5] represents USB2.0 ports 2 to 0
+	 * PT2_P2_REG bits[5..0] represents ports 9 to 3
+	 */
+		if (port > 2) {
+			reg = PT2_P2_REG;
+			port_shift = port - 3;
+		} else {
+			reg = PT2_P1_REG;
+			port_shift = port + 5;
+		}
+		break;
+	case 0x43bc:
+	/*
+	 * device is AMD_PROMONTORYA_1(0x43bc)
+	 * PT1_P1_REG[7..4] represents USB2.0 ports 3 to 0
+	 * PT1_P2_REG[5..0] represents ports 9 to 4
+	 */
+		if (port > 3) {
+			reg = PT1_P2_REG;
+			port_shift = port - 4;
+		} else {
+			reg = PT1_P1_REG;
+			port_shift = port + 4;
+		}
+		break;
+	default:
+		return false;
+	}
+	pci_write_config_word(pdev, PT_ADDR_INDX, reg);
+	pci_read_config_byte(pdev, PT_READ_INDX, &value);
+
+	return !(value & BIT(port_shift));
+}
+EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
+
+/*
+ * Make sure the controller is completely inactive, unable to
+ * generate interrupts or do DMA.
+ */
+void uhci_reset_hc(struct pci_dev *pdev, unsigned long base)
+{
+	/* Turn off PIRQ enable and SMI enable.  (This also turns off the
+	 * BIOS's USB Legacy Support.)  Turn off all the R/WC bits too.
+	 */
+	pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC);
+
+	/* Reset the HC - this will force us to get a
+	 * new notification of any already connected
+	 * ports due to the virtual disconnect that it
+	 * implies.
+	 */
+	outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD);
+	mb();
+	udelay(5);
+	if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET)
+		dev_warn(&pdev->dev, "HCRESET not completed yet!\n");
+
+	/* Just to be safe, disable interrupt requests and
+	 * make sure the controller is stopped.
+	 */
+	outw(0, base + UHCI_USBINTR);
+	outw(0, base + UHCI_USBCMD);
+}
+EXPORT_SYMBOL_GPL(uhci_reset_hc);
+
+/*
+ * Initialize a controller that was newly discovered or has just been
+ * resumed.  In either case we can't be sure of its previous state.
+ *
+ * Returns: 1 if the controller was reset, 0 otherwise.
+ */
+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
+{
+	u16 legsup;
+	unsigned int cmd, intr;
+
+	/*
+	 * When restarting a suspended controller, we expect all the
+	 * settings to be the same as we left them:
+	 *
+	 *	PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
+	 *	Controller is stopped and configured with EGSM set;
+	 *	No interrupts enabled except possibly Resume Detect.
+	 *
+	 * If any of these conditions are violated we do a complete reset.
+	 */
+	pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup);
+	if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) {
+		dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n",
+				__func__, legsup);
+		goto reset_needed;
+	}
+
+	cmd = inw(base + UHCI_USBCMD);
+	if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) ||
+			!(cmd & UHCI_USBCMD_EGSM)) {
+		dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n",
+				__func__, cmd);
+		goto reset_needed;
+	}
+
+	intr = inw(base + UHCI_USBINTR);
+	if (intr & (~UHCI_USBINTR_RESUME)) {
+		dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n",
+				__func__, intr);
+		goto reset_needed;
+	}
+	return 0;
+
+reset_needed:
+	dev_dbg(&pdev->dev, "Performing full reset\n");
+	uhci_reset_hc(pdev, base);
+	return 1;
+}
+EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
+
+static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
+{
+	u16 cmd;
+	return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask);
+}
+
+#define pio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_IO)
+#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY)
+
+static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
+{
+	unsigned long base = 0;
+	int i;
+
+	if (!pio_enabled(pdev))
+		return;
+
+	for (i = 0; i < PCI_STD_NUM_BARS; i++)
+		if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
+			base = pci_resource_start(pdev, i);
+			break;
+		}
+
+	if (base)
+		uhci_check_and_reset_hc(pdev, base);
+}
+
+static int mmio_resource_enabled(struct pci_dev *pdev, int idx)
+{
+	return pci_resource_start(pdev, idx) && mmio_enabled(pdev);
+}
+
+static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
+{
+	void __iomem *base;
+	u32 control;
+	u32 fminterval = 0;
+	bool no_fminterval = false;
+	int cnt;
+
+	if (!mmio_resource_enabled(pdev, 0))
+		return;
+
+	base = pci_ioremap_bar(pdev, 0);
+	if (base == NULL)
+		return;
+
+	/*
+	 * ULi M5237 OHCI controller locks the whole system when accessing
+	 * the OHCI_FMINTERVAL offset.
+	 */
+	if (pdev->vendor == PCI_VENDOR_ID_AL && pdev->device == 0x5237)
+		no_fminterval = true;
+
+	control = readl(base + OHCI_CONTROL);
+
+/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
+#ifdef __hppa__
+#define	OHCI_CTRL_MASK		(OHCI_CTRL_RWC | OHCI_CTRL_IR)
+#else
+#define	OHCI_CTRL_MASK		OHCI_CTRL_RWC
+
+	if (control & OHCI_CTRL_IR) {
+		int wait_time = 500; /* arbitrary; 5 seconds */
+		writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
+		writel(OHCI_OCR, base + OHCI_CMDSTATUS);
+		while (wait_time > 0 &&
+				readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
+			wait_time -= 10;
+			msleep(10);
+		}
+		if (wait_time <= 0)
+			dev_warn(&pdev->dev,
+				 "OHCI: BIOS handoff failed (BIOS bug?) %08x\n",
+				 readl(base + OHCI_CONTROL));
+	}
+#endif
+
+	/* disable interrupts */
+	writel((u32) ~0, base + OHCI_INTRDISABLE);
+
+	/* Go into the USB_RESET state, preserving RWC (and possibly IR) */
+	writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
+	readl(base + OHCI_CONTROL);
+
+	/* software reset of the controller, preserving HcFmInterval */
+	if (!no_fminterval)
+		fminterval = readl(base + OHCI_FMINTERVAL);
+
+	writel(OHCI_HCR, base + OHCI_CMDSTATUS);
+
+	/* reset requires max 10 us delay */
+	for (cnt = 30; cnt > 0; --cnt) {	/* ... allow extra time */
+		if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
+			break;
+		udelay(1);
+	}
+
+	if (!no_fminterval)
+		writel(fminterval, base + OHCI_FMINTERVAL);
+
+	/* Now the controller is safely in SUSPEND and nothing can wake it up */
+	iounmap(base);
+}
+
+static const struct dmi_system_id ehci_dmi_nohandoff_table[] = {
+	{
+		/*  Pegatron Lucid (ExoPC) */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "EXOPG06411"),
+			DMI_MATCH(DMI_BIOS_VERSION, "Lucid-CE-133"),
+		},
+	},
+	{
+		/*  Pegatron Lucid (Ordissimo AIRIS) */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "M11JB"),
+			DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
+		},
+	},
+	{
+		/*  Pegatron Lucid (Ordissimo) */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "Ordissimo"),
+			DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
+		},
+	},
+	{
+		/* HASEE E200 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "HASEE"),
+			DMI_MATCH(DMI_BOARD_NAME, "E210"),
+			DMI_MATCH(DMI_BIOS_VERSION, "6.00"),
+		},
+	},
+	{ }
+};
+
+static void ehci_bios_handoff(struct pci_dev *pdev,
+					void __iomem *op_reg_base,
+					u32 cap, u8 offset)
+{
+	int try_handoff = 1, tried_handoff = 0;
+
+	/*
+	 * The Pegatron Lucid tablet sporadically waits for 98 seconds trying
+	 * the handoff on its unused controller.  Skip it.
+	 *
+	 * The HASEE E200 hangs when the semaphore is set (bugzilla #77021).
+	 */
+	if (pdev->vendor == 0x8086 && (pdev->device == 0x283a ||
+			pdev->device == 0x27cc)) {
+		if (dmi_check_system(ehci_dmi_nohandoff_table))
+			try_handoff = 0;
+	}
+
+	if (try_handoff && (cap & EHCI_USBLEGSUP_BIOS)) {
+		dev_dbg(&pdev->dev, "EHCI: BIOS handoff\n");
+
+#if 0
+/* aleksey_gorelov@phoenix.com reports that some systems need SMI forced on,
+ * but that seems dubious in general (the BIOS left it off intentionally)
+ * and is known to prevent some systems from booting.  so we won't do this
+ * unless maybe we can determine when we're on a system that needs SMI forced.
+ */
+		/* BIOS workaround (?): be sure the pre-Linux code
+		 * receives the SMI
+		 */
+		pci_read_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, &val);
+		pci_write_config_dword(pdev, offset + EHCI_USBLEGCTLSTS,
+				       val | EHCI_USBLEGCTLSTS_SOOE);
+#endif
+
+		/* some systems get upset if this semaphore is
+		 * set for any other reason than forcing a BIOS
+		 * handoff..
+		 */
+		pci_write_config_byte(pdev, offset + 3, 1);
+	}
+
+	/* if boot firmware now owns EHCI, spin till it hands it over. */
+	if (try_handoff) {
+		int msec = 1000;
+		while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) {
+			tried_handoff = 1;
+			msleep(10);
+			msec -= 10;
+			pci_read_config_dword(pdev, offset, &cap);
+		}
+	}
+
+	if (cap & EHCI_USBLEGSUP_BIOS) {
+		/* well, possibly buggy BIOS... try to shut it down,
+		 * and hope nothing goes too wrong
+		 */
+		if (try_handoff)
+			dev_warn(&pdev->dev,
+				 "EHCI: BIOS handoff failed (BIOS bug?) %08x\n",
+				 cap);
+		pci_write_config_byte(pdev, offset + 2, 0);
+	}
+
+	/* just in case, always disable EHCI SMIs */
+	pci_write_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, 0);
+
+	/* If the BIOS ever owned the controller then we can't expect
+	 * any power sessions to remain intact.
+	 */
+	if (tried_handoff)
+		writel(0, op_reg_base + EHCI_CONFIGFLAG);
+}
+
+static void quirk_usb_disable_ehci(struct pci_dev *pdev)
+{
+	void __iomem *base, *op_reg_base;
+	u32	hcc_params, cap, val;
+	u8	offset, cap_length;
+	int	wait_time, count = 256/4;
+
+	if (!mmio_resource_enabled(pdev, 0))
+		return;
+
+	base = pci_ioremap_bar(pdev, 0);
+	if (base == NULL)
+		return;
+
+	cap_length = readb(base);
+	op_reg_base = base + cap_length;
+
+	/* EHCI 0.96 and later may have "extended capabilities"
+	 * spec section 5.1 explains the bios handoff, e.g. for
+	 * booting from USB disk or using a usb keyboard
+	 */
+	hcc_params = readl(base + EHCI_HCC_PARAMS);
+	offset = (hcc_params >> 8) & 0xff;
+	while (offset && --count) {
+		pci_read_config_dword(pdev, offset, &cap);
+
+		switch (cap & 0xff) {
+		case 1:
+			ehci_bios_handoff(pdev, op_reg_base, cap, offset);
+			break;
+		case 0: /* Illegal reserved cap, set cap=0 so we exit */
+			cap = 0;
+			fallthrough;
+		default:
+			dev_warn(&pdev->dev,
+				 "EHCI: unrecognized capability %02x\n",
+				 cap & 0xff);
+		}
+		offset = (cap >> 8) & 0xff;
+	}
+	if (!count)
+		dev_printk(KERN_DEBUG, &pdev->dev, "EHCI: capability loop?\n");
+
+	/*
+	 * halt EHCI & disable its interrupts in any case
+	 */
+	val = readl(op_reg_base + EHCI_USBSTS);
+	if ((val & EHCI_USBSTS_HALTED) == 0) {
+		val = readl(op_reg_base + EHCI_USBCMD);
+		val &= ~EHCI_USBCMD_RUN;
+		writel(val, op_reg_base + EHCI_USBCMD);
+
+		wait_time = 2000;
+		do {
+			writel(0x3f, op_reg_base + EHCI_USBSTS);
+			udelay(100);
+			wait_time -= 100;
+			val = readl(op_reg_base + EHCI_USBSTS);
+			if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
+				break;
+			}
+		} while (wait_time > 0);
+	}
+	writel(0, op_reg_base + EHCI_USBINTR);
+	writel(0x3f, op_reg_base + EHCI_USBSTS);
+
+	iounmap(base);
+}
+
+/*
+ * handshake - spin reading a register until handshake completes
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @wait_usec: timeout in microseconds
+ * @delay_usec: delay in microseconds to wait between polling
+ *
+ * Polls a register every delay_usec microseconds.
+ * Returns 0 when the mask bits have the value done.
+ * Returns -ETIMEDOUT if this condition is not true after
+ * wait_usec microseconds have passed.
+ */
+static int handshake(void __iomem *ptr, u32 mask, u32 done,
+		int wait_usec, int delay_usec)
+{
+	u32	result;
+
+	return readl_poll_timeout_atomic(ptr, result,
+					 ((result & mask) == done),
+					 delay_usec, wait_usec);
+}
+
+/*
+ * Intel's Panther Point chipset has two host controllers (EHCI and xHCI) that
+ * share some number of ports.  These ports can be switched between either
+ * controller.  Not all of the ports under the EHCI host controller may be
+ * switchable.
+ *
+ * The ports should be switched over to xHCI before PCI probes for any device
+ * start.  This avoids active devices under EHCI being disconnected during the
+ * port switchover, which could cause loss of data on USB storage devices, or
+ * failed boot when the root file system is on a USB mass storage device and is
+ * enumerated under EHCI first.
+ *
+ * We write into the xHC's PCI configuration space in some Intel-specific
+ * registers to switch the ports over.  The USB 3.0 terminations and the USB
+ * 2.0 data wires are switched separately.  We want to enable the SuperSpeed
+ * terminations before switching the USB 2.0 wires over, so that USB 3.0
+ * devices connect at SuperSpeed, rather than at USB 2.0 speeds.
+ */
+void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev)
+{
+	u32		ports_available;
+	bool		ehci_found = false;
+	struct pci_dev	*companion = NULL;
+
+	/* Sony VAIO t-series with subsystem device ID 90a8 is not capable of
+	 * switching ports from EHCI to xHCI
+	 */
+	if (xhci_pdev->subsystem_vendor == PCI_VENDOR_ID_SONY &&
+	    xhci_pdev->subsystem_device == 0x90a8)
+		return;
+
+	/* make sure an intel EHCI controller exists */
+	for_each_pci_dev(companion) {
+		if (companion->class == PCI_CLASS_SERIAL_USB_EHCI &&
+		    companion->vendor == PCI_VENDOR_ID_INTEL) {
+			ehci_found = true;
+			break;
+		}
+	}
+
+	if (!ehci_found)
+		return;
+
+	/* Don't switchover the ports if the user hasn't compiled the xHCI
+	 * driver.  Otherwise they will see "dead" USB ports that don't power
+	 * the devices.
+	 */
+	if (!IS_ENABLED(CONFIG_USB_XHCI_HCD)) {
+		dev_warn(&xhci_pdev->dev,
+			 "CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.\n");
+		dev_warn(&xhci_pdev->dev,
+				"USB 3.0 devices will work at USB 2.0 speeds.\n");
+		usb_disable_xhci_ports(xhci_pdev);
+		return;
+	}
+
+	/* Read USB3PRM, the USB 3.0 Port Routing Mask Register
+	 * Indicate the ports that can be changed from OS.
+	 */
+	pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM,
+			&ports_available);
+
+	dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n",
+			ports_available);
+
+	/* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
+	 * Register, to turn on SuperSpeed terminations for the
+	 * switchable ports.
+	 */
+	pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
+			ports_available);
+
+	pci_read_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
+			&ports_available);
+	dev_dbg(&xhci_pdev->dev,
+		"USB 3.0 ports that are now enabled under xHCI: 0x%x\n",
+		ports_available);
+
+	/* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register
+	 * Indicate the USB 2.0 ports to be controlled by the xHCI host.
+	 */
+
+	pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM,
+			&ports_available);
+
+	dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n",
+			ports_available);
+
+	/* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
+	 * switch the USB 2.0 power and data lines over to the xHCI
+	 * host.
+	 */
+	pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
+			ports_available);
+
+	pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
+			&ports_available);
+	dev_dbg(&xhci_pdev->dev,
+		"USB 2.0 ports that are now switched over to xHCI: 0x%x\n",
+		ports_available);
+}
+EXPORT_SYMBOL_GPL(usb_enable_intel_xhci_ports);
+
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev)
+{
+	pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0);
+	pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0);
+}
+EXPORT_SYMBOL_GPL(usb_disable_xhci_ports);
+
+/*
+ * PCI Quirks for xHCI.
+ *
+ * Takes care of the handoff between the Pre-OS (i.e. BIOS) and the OS.
+ * It signals to the BIOS that the OS wants control of the host controller,
+ * and then waits 1 second for the BIOS to hand over control.
+ * If we timeout, assume the BIOS is broken and take control anyway.
+ */
+static void quirk_usb_handoff_xhci(struct pci_dev *pdev)
+{
+	void __iomem *base;
+	int ext_cap_offset;
+	void __iomem *op_reg_base;
+	u32 val;
+	int timeout;
+	int len = pci_resource_len(pdev, 0);
+
+	if (!mmio_resource_enabled(pdev, 0))
+		return;
+
+	base = ioremap(pci_resource_start(pdev, 0), len);
+	if (base == NULL)
+		return;
+
+	/*
+	 * Find the Legacy Support Capability register -
+	 * this is optional for xHCI host controllers.
+	 */
+	ext_cap_offset = xhci_find_next_ext_cap(base, 0, XHCI_EXT_CAPS_LEGACY);
+
+	if (!ext_cap_offset)
+		goto hc_init;
+
+	if ((ext_cap_offset + sizeof(val)) > len) {
+		/* We're reading garbage from the controller */
+		dev_warn(&pdev->dev, "xHCI controller failing to respond");
+		goto iounmap;
+	}
+	val = readl(base + ext_cap_offset);
+
+	/* Auto handoff never worked for these devices. Force it and continue */
+	if ((pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) ||
+			(pdev->vendor == PCI_VENDOR_ID_RENESAS
+			 && pdev->device == 0x0014)) {
+		val = (val | XHCI_HC_OS_OWNED) & ~XHCI_HC_BIOS_OWNED;
+		writel(val, base + ext_cap_offset);
+	}
+
+	/* If the BIOS owns the HC, signal that the OS wants it, and wait */
+	if (val & XHCI_HC_BIOS_OWNED) {
+		writel(val | XHCI_HC_OS_OWNED, base + ext_cap_offset);
+
+		/* Wait for 1 second with 10 microsecond polling interval */
+		timeout = handshake(base + ext_cap_offset, XHCI_HC_BIOS_OWNED,
+				0, 1000000, 10);
+
+		/* Assume a buggy BIOS and take HC ownership anyway */
+		if (timeout) {
+			dev_warn(&pdev->dev,
+				 "xHCI BIOS handoff failed (BIOS bug ?) %08x\n",
+				 val);
+			writel(val & ~XHCI_HC_BIOS_OWNED, base + ext_cap_offset);
+		}
+	}
+
+	val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+	/* Mask off (turn off) any enabled SMIs */
+	val &= XHCI_LEGACY_DISABLE_SMI;
+	/* Mask all SMI events bits, RW1C */
+	val |= XHCI_LEGACY_SMI_EVENTS;
+	/* Disable any BIOS SMIs and clear all SMI events*/
+	writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+
+hc_init:
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+		usb_enable_intel_xhci_ports(pdev);
+
+	op_reg_base = base + XHCI_HC_LENGTH(readl(base));
+
+	/* Wait for the host controller to be ready before writing any
+	 * operational or runtime registers.  Wait 5 seconds and no more.
+	 */
+	timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_CNR, 0,
+			5000000, 10);
+	/* Assume a buggy HC and start HC initialization anyway */
+	if (timeout) {
+		val = readl(op_reg_base + XHCI_STS_OFFSET);
+		dev_warn(&pdev->dev,
+			 "xHCI HW not ready after 5 sec (HC bug?) status = 0x%x\n",
+			 val);
+	}
+
+	/* Send the halt and disable interrupts command */
+	val = readl(op_reg_base + XHCI_CMD_OFFSET);
+	val &= ~(XHCI_CMD_RUN | XHCI_IRQS);
+	writel(val, op_reg_base + XHCI_CMD_OFFSET);
+
+	/* Wait for the HC to halt - poll every 125 usec (one microframe). */
+	timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_HALT, 1,
+			XHCI_MAX_HALT_USEC, 125);
+	if (timeout) {
+		val = readl(op_reg_base + XHCI_STS_OFFSET);
+		dev_warn(&pdev->dev,
+			 "xHCI HW did not halt within %d usec status = 0x%x\n",
+			 XHCI_MAX_HALT_USEC, val);
+	}
+
+iounmap:
+	iounmap(base);
+}
+
+static void quirk_usb_early_handoff(struct pci_dev *pdev)
+{
+	struct device_node *parent;
+	bool is_rpi;
+
+	/* Skip Netlogic mips SoC's internal PCI USB controller.
+	 * This device does not need/support EHCI/OHCI handoff
+	 */
+	if (pdev->vendor == 0x184e)	/* vendor Netlogic */
+		return;
+
+	/*
+	 * Bypass the Raspberry Pi 4 controller xHCI controller, things are
+	 * taken care of by the board's co-processor.
+	 */
+	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
+		parent = of_get_parent(pdev->bus->dev.of_node);
+		is_rpi = of_device_is_compatible(parent, "brcm,bcm2711-pcie");
+		of_node_put(parent);
+		if (is_rpi)
+			return;
+	}
+
+	if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
+			pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
+			pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
+			pdev->class != PCI_CLASS_SERIAL_USB_XHCI)
+		return;
+
+	if (pci_enable_device(pdev) < 0) {
+		dev_warn(&pdev->dev,
+			 "Can't enable PCI device, BIOS handoff failed.\n");
+		return;
+	}
+	if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
+		quirk_usb_handoff_uhci(pdev);
+	else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
+		quirk_usb_handoff_ohci(pdev);
+	else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI)
+		quirk_usb_disable_ehci(pdev);
+	else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
+		quirk_usb_handoff_xhci(pdev);
+	pci_disable_device(pdev);
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+			PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
new file mode 100644
index 000000000..e729de21f
--- /dev/null
+++ b/drivers/usb/host/pci-quirks.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_USB_PCI_QUIRKS_H
+#define __LINUX_USB_PCI_QUIRKS_H
+
+#ifdef CONFIG_USB_PCI
+void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
+bool usb_amd_hang_symptom_quirk(void);
+bool usb_amd_prefetch_quirk(void);
+void usb_amd_dev_put(void);
+bool usb_amd_quirk_pll_check(void);
+void usb_amd_quirk_pll_disable(void);
+void usb_amd_quirk_pll_enable(void);
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
+void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
+void sb800_prefetch(struct device *dev, int on);
+bool usb_amd_pt_check_port(struct device *device, int port);
+#else
+struct pci_dev;
+static inline void usb_amd_quirk_pll_disable(void) {}
+static inline void usb_amd_quirk_pll_enable(void) {}
+static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
+static inline void usb_amd_dev_put(void) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
+static inline void sb800_prefetch(struct device *dev, int on) {}
+static inline bool usb_amd_pt_check_port(struct device *device, int port)
+{
+	return false;
+}
+#endif  /* CONFIG_USB_PCI */
+
+#endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
new file mode 100644
index 000000000..abb88dd40
--- /dev/null
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -0,0 +1,2521 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * R8A66597 HCD (Host Controller Driver)
+ *
+ * Copyright (C) 2006-2007 Renesas Solutions Corp.
+ * Portions Copyright (C) 2004 Psion Teklogix (for NetBook PRO)
+ * Portions Copyright (C) 2004-2005 David Brownell
+ * Portions Copyright (C) 1999 Roman Weissgaerber
+ *
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <asm/cacheflush.h>
+
+#include "r8a66597.h"
+
+MODULE_DESCRIPTION("R8A66597 USB Host Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yoshihiro Shimoda");
+MODULE_ALIAS("platform:r8a66597_hcd");
+
+#define DRIVER_VERSION	"2009-05-26"
+
+static const char hcd_name[] = "r8a66597_hcd";
+
+static void packet_write(struct r8a66597 *r8a66597, u16 pipenum);
+static int r8a66597_get_frame(struct usb_hcd *hcd);
+
+/* this function must be called with interrupt disabled */
+static void enable_pipe_irq(struct r8a66597 *r8a66597, u16 pipenum,
+			    unsigned long reg)
+{
+	u16 tmp;
+
+	tmp = r8a66597_read(r8a66597, INTENB0);
+	r8a66597_bclr(r8a66597, BEMPE | NRDYE | BRDYE, INTENB0);
+	r8a66597_bset(r8a66597, 1 << pipenum, reg);
+	r8a66597_write(r8a66597, tmp, INTENB0);
+}
+
+/* this function must be called with interrupt disabled */
+static void disable_pipe_irq(struct r8a66597 *r8a66597, u16 pipenum,
+			     unsigned long reg)
+{
+	u16 tmp;
+
+	tmp = r8a66597_read(r8a66597, INTENB0);
+	r8a66597_bclr(r8a66597, BEMPE | NRDYE | BRDYE, INTENB0);
+	r8a66597_bclr(r8a66597, 1 << pipenum, reg);
+	r8a66597_write(r8a66597, tmp, INTENB0);
+}
+
+static void set_devadd_reg(struct r8a66597 *r8a66597, u8 r8a66597_address,
+			   u16 usbspd, u8 upphub, u8 hubport, int port)
+{
+	u16 val;
+	unsigned long devadd_reg = get_devadd_addr(r8a66597_address);
+
+	val = (upphub << 11) | (hubport << 8) | (usbspd << 6) | (port & 0x0001);
+	r8a66597_write(r8a66597, val, devadd_reg);
+}
+
+static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
+{
+	u16 tmp;
+	int i = 0;
+
+	if (r8a66597->pdata->on_chip) {
+		clk_prepare_enable(r8a66597->clk);
+		do {
+			r8a66597_write(r8a66597, SCKE, SYSCFG0);
+			tmp = r8a66597_read(r8a66597, SYSCFG0);
+			if (i++ > 1000) {
+				printk(KERN_ERR "r8a66597: reg access fail.\n");
+				return -ENXIO;
+			}
+		} while ((tmp & SCKE) != SCKE);
+		r8a66597_write(r8a66597, 0x04, 0x02);
+	} else {
+		do {
+			r8a66597_write(r8a66597, USBE, SYSCFG0);
+			tmp = r8a66597_read(r8a66597, SYSCFG0);
+			if (i++ > 1000) {
+				printk(KERN_ERR "r8a66597: reg access fail.\n");
+				return -ENXIO;
+			}
+		} while ((tmp & USBE) != USBE);
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+		r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata),
+			      XTAL, SYSCFG0);
+
+		i = 0;
+		r8a66597_bset(r8a66597, XCKE, SYSCFG0);
+		do {
+			msleep(1);
+			tmp = r8a66597_read(r8a66597, SYSCFG0);
+			if (i++ > 500) {
+				printk(KERN_ERR "r8a66597: reg access fail.\n");
+				return -ENXIO;
+			}
+		} while ((tmp & SCKE) != SCKE);
+	}
+
+	return 0;
+}
+
+static void r8a66597_clock_disable(struct r8a66597 *r8a66597)
+{
+	r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
+	udelay(1);
+
+	if (r8a66597->pdata->on_chip) {
+		clk_disable_unprepare(r8a66597->clk);
+	} else {
+		r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
+		r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+	}
+}
+
+static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port)
+{
+	u16 val;
+
+	val = port ? DRPD : DCFM | DRPD;
+	r8a66597_bset(r8a66597, val, get_syscfg_reg(port));
+	r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port));
+
+	r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR, get_dmacfg_reg(port));
+	r8a66597_bclr(r8a66597, DTCHE, get_intenb_reg(port));
+	r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
+}
+
+static void r8a66597_disable_port(struct r8a66597 *r8a66597, int port)
+{
+	u16 val, tmp;
+
+	r8a66597_write(r8a66597, 0, get_intenb_reg(port));
+	r8a66597_write(r8a66597, 0, get_intsts_reg(port));
+
+	r8a66597_port_power(r8a66597, port, 0);
+
+	do {
+		tmp = r8a66597_read(r8a66597, SOFCFG) & EDGESTS;
+		udelay(640);
+	} while (tmp == EDGESTS);
+
+	val = port ? DRPD : DCFM | DRPD;
+	r8a66597_bclr(r8a66597, val, get_syscfg_reg(port));
+	r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port));
+}
+
+static int enable_controller(struct r8a66597 *r8a66597)
+{
+	int ret, port;
+	u16 vif = r8a66597->pdata->vif ? LDRV : 0;
+	u16 irq_sense = r8a66597->irq_sense_low ? INTL : 0;
+	u16 endian = r8a66597->pdata->endian ? BIGEND : 0;
+
+	ret = r8a66597_clock_enable(r8a66597);
+	if (ret < 0)
+		return ret;
+
+	r8a66597_bset(r8a66597, vif & LDRV, PINCFG);
+	r8a66597_bset(r8a66597, USBE, SYSCFG0);
+
+	r8a66597_bset(r8a66597, BEMPE | NRDYE | BRDYE, INTENB0);
+	r8a66597_bset(r8a66597, irq_sense & INTL, SOFCFG);
+	r8a66597_bset(r8a66597, BRDY0, BRDYENB);
+	r8a66597_bset(r8a66597, BEMP0, BEMPENB);
+
+	r8a66597_bset(r8a66597, endian & BIGEND, CFIFOSEL);
+	r8a66597_bset(r8a66597, endian & BIGEND, D0FIFOSEL);
+	r8a66597_bset(r8a66597, endian & BIGEND, D1FIFOSEL);
+	r8a66597_bset(r8a66597, TRNENSEL, SOFCFG);
+
+	r8a66597_bset(r8a66597, SIGNE | SACKE, INTENB1);
+
+	for (port = 0; port < r8a66597->max_root_hub; port++)
+		r8a66597_enable_port(r8a66597, port);
+
+	return 0;
+}
+
+static void disable_controller(struct r8a66597 *r8a66597)
+{
+	int port;
+
+	/* disable interrupts */
+	r8a66597_write(r8a66597, 0, INTENB0);
+	r8a66597_write(r8a66597, 0, INTENB1);
+	r8a66597_write(r8a66597, 0, BRDYENB);
+	r8a66597_write(r8a66597, 0, BEMPENB);
+	r8a66597_write(r8a66597, 0, NRDYENB);
+
+	/* clear status */
+	r8a66597_write(r8a66597, 0, BRDYSTS);
+	r8a66597_write(r8a66597, 0, NRDYSTS);
+	r8a66597_write(r8a66597, 0, BEMPSTS);
+
+	for (port = 0; port < r8a66597->max_root_hub; port++)
+		r8a66597_disable_port(r8a66597, port);
+
+	r8a66597_clock_disable(r8a66597);
+}
+
+static int get_parent_r8a66597_address(struct r8a66597 *r8a66597,
+				       struct usb_device *udev)
+{
+	struct r8a66597_device *dev;
+
+	if (udev->parent && udev->parent->devnum != 1)
+		udev = udev->parent;
+
+	dev = dev_get_drvdata(&udev->dev);
+	if (dev)
+		return dev->address;
+	else
+		return 0;
+}
+
+static int is_child_device(char *devpath)
+{
+	return (devpath[2] ? 1 : 0);
+}
+
+static int is_hub_limit(char *devpath)
+{
+	return ((strlen(devpath) >= 4) ? 1 : 0);
+}
+
+static void get_port_number(struct r8a66597 *r8a66597,
+			    char *devpath, u16 *root_port, u16 *hub_port)
+{
+	if (root_port) {
+		*root_port = (devpath[0] & 0x0F) - 1;
+		if (*root_port >= r8a66597->max_root_hub)
+			printk(KERN_ERR "r8a66597: Illegal root port number.\n");
+	}
+	if (hub_port)
+		*hub_port = devpath[2] & 0x0F;
+}
+
+static u16 get_r8a66597_usb_speed(enum usb_device_speed speed)
+{
+	u16 usbspd = 0;
+
+	switch (speed) {
+	case USB_SPEED_LOW:
+		usbspd = LSMODE;
+		break;
+	case USB_SPEED_FULL:
+		usbspd = FSMODE;
+		break;
+	case USB_SPEED_HIGH:
+		usbspd = HSMODE;
+		break;
+	default:
+		printk(KERN_ERR "r8a66597: unknown speed\n");
+		break;
+	}
+
+	return usbspd;
+}
+
+static void set_child_connect_map(struct r8a66597 *r8a66597, int address)
+{
+	int idx;
+
+	idx = address / 32;
+	r8a66597->child_connect_map[idx] |= 1 << (address % 32);
+}
+
+static void put_child_connect_map(struct r8a66597 *r8a66597, int address)
+{
+	int idx;
+
+	idx = address / 32;
+	r8a66597->child_connect_map[idx] &= ~(1 << (address % 32));
+}
+
+static void set_pipe_reg_addr(struct r8a66597_pipe *pipe, u8 dma_ch)
+{
+	u16 pipenum = pipe->info.pipenum;
+	const unsigned long fifoaddr[] = {D0FIFO, D1FIFO, CFIFO};
+	const unsigned long fifosel[] = {D0FIFOSEL, D1FIFOSEL, CFIFOSEL};
+	const unsigned long fifoctr[] = {D0FIFOCTR, D1FIFOCTR, CFIFOCTR};
+
+	if (dma_ch > R8A66597_PIPE_NO_DMA)	/* dma fifo not use? */
+		dma_ch = R8A66597_PIPE_NO_DMA;
+
+	pipe->fifoaddr = fifoaddr[dma_ch];
+	pipe->fifosel = fifosel[dma_ch];
+	pipe->fifoctr = fifoctr[dma_ch];
+
+	if (pipenum == 0)
+		pipe->pipectr = DCPCTR;
+	else
+		pipe->pipectr = get_pipectr_addr(pipenum);
+
+	if (check_bulk_or_isoc(pipenum)) {
+		pipe->pipetre = get_pipetre_addr(pipenum);
+		pipe->pipetrn = get_pipetrn_addr(pipenum);
+	} else {
+		pipe->pipetre = 0;
+		pipe->pipetrn = 0;
+	}
+}
+
+static struct r8a66597_device *
+get_urb_to_r8a66597_dev(struct r8a66597 *r8a66597, struct urb *urb)
+{
+	if (usb_pipedevice(urb->pipe) == 0)
+		return &r8a66597->device0;
+
+	return dev_get_drvdata(&urb->dev->dev);
+}
+
+static int make_r8a66597_device(struct r8a66597 *r8a66597,
+				struct urb *urb, u8 addr)
+{
+	struct r8a66597_device *dev;
+	int usb_address = urb->setup_packet[2];	/* urb->pipe is address 0 */
+
+	dev = kzalloc(sizeof(struct r8a66597_device), GFP_ATOMIC);
+	if (dev == NULL)
+		return -ENOMEM;
+
+	dev_set_drvdata(&urb->dev->dev, dev);
+	dev->udev = urb->dev;
+	dev->address = addr;
+	dev->usb_address = usb_address;
+	dev->state = USB_STATE_ADDRESS;
+	dev->ep_in_toggle = 0;
+	dev->ep_out_toggle = 0;
+	INIT_LIST_HEAD(&dev->device_list);
+	list_add_tail(&dev->device_list, &r8a66597->child_device);
+
+	get_port_number(r8a66597, urb->dev->devpath,
+			&dev->root_port, &dev->hub_port);
+	if (!is_child_device(urb->dev->devpath))
+		r8a66597->root_hub[dev->root_port].dev = dev;
+
+	set_devadd_reg(r8a66597, dev->address,
+		       get_r8a66597_usb_speed(urb->dev->speed),
+		       get_parent_r8a66597_address(r8a66597, urb->dev),
+		       dev->hub_port, dev->root_port);
+
+	return 0;
+}
+
+/* this function must be called with interrupt disabled */
+static u8 alloc_usb_address(struct r8a66597 *r8a66597, struct urb *urb)
+{
+	u8 addr;	/* R8A66597's address */
+	struct r8a66597_device *dev;
+
+	if (is_hub_limit(urb->dev->devpath)) {
+		dev_err(&urb->dev->dev, "External hub limit reached.\n");
+		return 0;
+	}
+
+	dev = get_urb_to_r8a66597_dev(r8a66597, urb);
+	if (dev && dev->state >= USB_STATE_ADDRESS)
+		return dev->address;
+
+	for (addr = 1; addr <= R8A66597_MAX_DEVICE; addr++) {
+		if (r8a66597->address_map & (1 << addr))
+			continue;
+
+		dev_dbg(&urb->dev->dev, "alloc_address: r8a66597_addr=%d\n", addr);
+		r8a66597->address_map |= 1 << addr;
+
+		if (make_r8a66597_device(r8a66597, urb, addr) < 0)
+			return 0;
+
+		return addr;
+	}
+
+	dev_err(&urb->dev->dev,
+		"cannot communicate with a USB device more than 10.(%x)\n",
+		r8a66597->address_map);
+
+	return 0;
+}
+
+/* this function must be called with interrupt disabled */
+static void free_usb_address(struct r8a66597 *r8a66597,
+			     struct r8a66597_device *dev, int reset)
+{
+	int port;
+
+	if (!dev)
+		return;
+
+	dev_dbg(&dev->udev->dev, "free_addr: addr=%d\n", dev->address);
+
+	dev->state = USB_STATE_DEFAULT;
+	r8a66597->address_map &= ~(1 << dev->address);
+	dev->address = 0;
+	/*
+	 * Only when resetting USB, it is necessary to erase drvdata. When
+	 * a usb device with usb hub is disconnect, "dev->udev" is already
+	 * freed on usb_desconnect(). So we cannot access the data.
+	 */
+	if (reset)
+		dev_set_drvdata(&dev->udev->dev, NULL);
+	list_del(&dev->device_list);
+	kfree(dev);
+
+	for (port = 0; port < r8a66597->max_root_hub; port++) {
+		if (r8a66597->root_hub[port].dev == dev) {
+			r8a66597->root_hub[port].dev = NULL;
+			break;
+		}
+	}
+}
+
+static void r8a66597_reg_wait(struct r8a66597 *r8a66597, unsigned long reg,
+			      u16 mask, u16 loop)
+{
+	u16 tmp;
+	int i = 0;
+
+	do {
+		tmp = r8a66597_read(r8a66597, reg);
+		if (i++ > 1000000) {
+			printk(KERN_ERR "r8a66597: register%lx, loop %x "
+			       "is timeout\n", reg, loop);
+			break;
+		}
+		ndelay(1);
+	} while ((tmp & mask) != loop);
+}
+
+/* this function must be called with interrupt disabled */
+static void pipe_start(struct r8a66597 *r8a66597, struct r8a66597_pipe *pipe)
+{
+	u16 tmp;
+
+	tmp = r8a66597_read(r8a66597, pipe->pipectr) & PID;
+	if ((pipe->info.pipenum != 0) & ((tmp & PID_STALL) != 0)) /* stall? */
+		r8a66597_mdfy(r8a66597, PID_NAK, PID, pipe->pipectr);
+	r8a66597_mdfy(r8a66597, PID_BUF, PID, pipe->pipectr);
+}
+
+/* this function must be called with interrupt disabled */
+static void pipe_stop(struct r8a66597 *r8a66597, struct r8a66597_pipe *pipe)
+{
+	u16 tmp;
+
+	tmp = r8a66597_read(r8a66597, pipe->pipectr) & PID;
+	if ((tmp & PID_STALL11) != PID_STALL11)	/* force stall? */
+		r8a66597_mdfy(r8a66597, PID_STALL, PID, pipe->pipectr);
+	r8a66597_mdfy(r8a66597, PID_NAK, PID, pipe->pipectr);
+	r8a66597_reg_wait(r8a66597, pipe->pipectr, PBUSY, 0);
+}
+
+/* this function must be called with interrupt disabled */
+static void clear_all_buffer(struct r8a66597 *r8a66597,
+			     struct r8a66597_pipe *pipe)
+{
+	if (!pipe || pipe->info.pipenum == 0)
+		return;
+
+	pipe_stop(r8a66597, pipe);
+	r8a66597_bset(r8a66597, ACLRM, pipe->pipectr);
+	r8a66597_read(r8a66597, pipe->pipectr);
+	r8a66597_read(r8a66597, pipe->pipectr);
+	r8a66597_read(r8a66597, pipe->pipectr);
+	r8a66597_bclr(r8a66597, ACLRM, pipe->pipectr);
+}
+
+/* this function must be called with interrupt disabled */
+static void r8a66597_pipe_toggle(struct r8a66597 *r8a66597,
+				 struct r8a66597_pipe *pipe, int toggle)
+{
+	if (toggle)
+		r8a66597_bset(r8a66597, SQSET, pipe->pipectr);
+	else
+		r8a66597_bset(r8a66597, SQCLR, pipe->pipectr);
+}
+
+static inline unsigned short mbw_value(struct r8a66597 *r8a66597)
+{
+	if (r8a66597->pdata->on_chip)
+		return MBW_32;
+	else
+		return MBW_16;
+}
+
+/* this function must be called with interrupt disabled */
+static inline void cfifo_change(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	unsigned short mbw = mbw_value(r8a66597);
+
+	r8a66597_mdfy(r8a66597, mbw | pipenum, mbw | CURPIPE, CFIFOSEL);
+	r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, pipenum);
+}
+
+/* this function must be called with interrupt disabled */
+static inline void fifo_change_from_pipe(struct r8a66597 *r8a66597,
+					 struct r8a66597_pipe *pipe)
+{
+	unsigned short mbw = mbw_value(r8a66597);
+
+	cfifo_change(r8a66597, 0);
+	r8a66597_mdfy(r8a66597, mbw | 0, mbw | CURPIPE, D0FIFOSEL);
+	r8a66597_mdfy(r8a66597, mbw | 0, mbw | CURPIPE, D1FIFOSEL);
+
+	r8a66597_mdfy(r8a66597, mbw | pipe->info.pipenum, mbw | CURPIPE,
+		      pipe->fifosel);
+	r8a66597_reg_wait(r8a66597, pipe->fifosel, CURPIPE, pipe->info.pipenum);
+}
+
+static u16 r8a66597_get_pipenum(struct urb *urb, struct usb_host_endpoint *hep)
+{
+	struct r8a66597_pipe *pipe = hep->hcpriv;
+
+	if (usb_pipeendpoint(urb->pipe) == 0)
+		return 0;
+	else
+		return pipe->info.pipenum;
+}
+
+static u16 get_urb_to_r8a66597_addr(struct r8a66597 *r8a66597, struct urb *urb)
+{
+	struct r8a66597_device *dev = get_urb_to_r8a66597_dev(r8a66597, urb);
+
+	return (usb_pipedevice(urb->pipe) == 0) ? 0 : dev->address;
+}
+
+static unsigned short *get_toggle_pointer(struct r8a66597_device *dev,
+					  int urb_pipe)
+{
+	if (!dev)
+		return NULL;
+
+	return usb_pipein(urb_pipe) ? &dev->ep_in_toggle : &dev->ep_out_toggle;
+}
+
+/* this function must be called with interrupt disabled */
+static void pipe_toggle_set(struct r8a66597 *r8a66597,
+			    struct r8a66597_pipe *pipe,
+			    struct urb *urb, int set)
+{
+	struct r8a66597_device *dev = get_urb_to_r8a66597_dev(r8a66597, urb);
+	unsigned char endpoint = usb_pipeendpoint(urb->pipe);
+	unsigned short *toggle = get_toggle_pointer(dev, urb->pipe);
+
+	if (!toggle)
+		return;
+
+	if (set)
+		*toggle |= 1 << endpoint;
+	else
+		*toggle &= ~(1 << endpoint);
+}
+
+/* this function must be called with interrupt disabled */
+static void pipe_toggle_save(struct r8a66597 *r8a66597,
+			     struct r8a66597_pipe *pipe,
+			     struct urb *urb)
+{
+	if (r8a66597_read(r8a66597, pipe->pipectr) & SQMON)
+		pipe_toggle_set(r8a66597, pipe, urb, 1);
+	else
+		pipe_toggle_set(r8a66597, pipe, urb, 0);
+}
+
+/* this function must be called with interrupt disabled */
+static void pipe_toggle_restore(struct r8a66597 *r8a66597,
+				struct r8a66597_pipe *pipe,
+				struct urb *urb)
+{
+	struct r8a66597_device *dev = get_urb_to_r8a66597_dev(r8a66597, urb);
+	unsigned char endpoint = usb_pipeendpoint(urb->pipe);
+	unsigned short *toggle = get_toggle_pointer(dev, urb->pipe);
+
+	if (!toggle)
+		return;
+
+	r8a66597_pipe_toggle(r8a66597, pipe, *toggle & (1 << endpoint));
+}
+
+/* this function must be called with interrupt disabled */
+static void pipe_buffer_setting(struct r8a66597 *r8a66597,
+				struct r8a66597_pipe_info *info)
+{
+	u16 val = 0;
+
+	if (info->pipenum == 0)
+		return;
+
+	r8a66597_bset(r8a66597, ACLRM, get_pipectr_addr(info->pipenum));
+	r8a66597_bclr(r8a66597, ACLRM, get_pipectr_addr(info->pipenum));
+	r8a66597_write(r8a66597, info->pipenum, PIPESEL);
+	if (!info->dir_in)
+		val |= R8A66597_DIR;
+	if (info->type == R8A66597_BULK && info->dir_in)
+		val |= R8A66597_DBLB | R8A66597_SHTNAK;
+	val |= info->type | info->epnum;
+	r8a66597_write(r8a66597, val, PIPECFG);
+
+	r8a66597_write(r8a66597, (info->buf_bsize << 10) | (info->bufnum),
+		       PIPEBUF);
+	r8a66597_write(r8a66597, make_devsel(info->address) | info->maxpacket,
+		       PIPEMAXP);
+	r8a66597_write(r8a66597, info->interval, PIPEPERI);
+}
+
+/* this function must be called with interrupt disabled */
+static void pipe_setting(struct r8a66597 *r8a66597, struct r8a66597_td *td)
+{
+	struct r8a66597_pipe_info *info;
+	struct urb *urb = td->urb;
+
+	if (td->pipenum > 0) {
+		info = &td->pipe->info;
+		cfifo_change(r8a66597, 0);
+		pipe_buffer_setting(r8a66597, info);
+
+		if (!usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+				   usb_pipeout(urb->pipe)) &&
+		    !usb_pipecontrol(urb->pipe)) {
+			r8a66597_pipe_toggle(r8a66597, td->pipe, 0);
+			pipe_toggle_set(r8a66597, td->pipe, urb, 0);
+			clear_all_buffer(r8a66597, td->pipe);
+			usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+				      usb_pipeout(urb->pipe), 1);
+		}
+		pipe_toggle_restore(r8a66597, td->pipe, urb);
+	}
+}
+
+/* this function must be called with interrupt disabled */
+static u16 get_empty_pipenum(struct r8a66597 *r8a66597,
+			     struct usb_endpoint_descriptor *ep)
+{
+	u16 array[R8A66597_MAX_NUM_PIPE], i = 0, min;
+
+	memset(array, 0, sizeof(array));
+	switch (usb_endpoint_type(ep)) {
+	case USB_ENDPOINT_XFER_BULK:
+		if (usb_endpoint_dir_in(ep))
+			array[i++] = 4;
+		else {
+			array[i++] = 3;
+			array[i++] = 5;
+		}
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		if (usb_endpoint_dir_in(ep)) {
+			array[i++] = 6;
+			array[i++] = 7;
+			array[i++] = 8;
+		} else
+			array[i++] = 9;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (usb_endpoint_dir_in(ep))
+			array[i++] = 2;
+		else
+			array[i++] = 1;
+		break;
+	default:
+		printk(KERN_ERR "r8a66597: Illegal type\n");
+		return 0;
+	}
+
+	i = 1;
+	min = array[0];
+	while (array[i] != 0) {
+		if (r8a66597->pipe_cnt[min] > r8a66597->pipe_cnt[array[i]])
+			min = array[i];
+		i++;
+	}
+
+	return min;
+}
+
+static u16 get_r8a66597_type(__u8 type)
+{
+	u16 r8a66597_type;
+
+	switch (type) {
+	case USB_ENDPOINT_XFER_BULK:
+		r8a66597_type = R8A66597_BULK;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		r8a66597_type = R8A66597_INT;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		r8a66597_type = R8A66597_ISO;
+		break;
+	default:
+		printk(KERN_ERR "r8a66597: Illegal type\n");
+		r8a66597_type = 0x0000;
+		break;
+	}
+
+	return r8a66597_type;
+}
+
+static u16 get_bufnum(u16 pipenum)
+{
+	u16 bufnum = 0;
+
+	if (pipenum == 0)
+		bufnum = 0;
+	else if (check_bulk_or_isoc(pipenum))
+		bufnum = 8 + (pipenum - 1) * R8A66597_BUF_BSIZE*2;
+	else if (check_interrupt(pipenum))
+		bufnum = 4 + (pipenum - 6);
+	else
+		printk(KERN_ERR "r8a66597: Illegal pipenum (%d)\n", pipenum);
+
+	return bufnum;
+}
+
+static u16 get_buf_bsize(u16 pipenum)
+{
+	u16 buf_bsize = 0;
+
+	if (pipenum == 0)
+		buf_bsize = 3;
+	else if (check_bulk_or_isoc(pipenum))
+		buf_bsize = R8A66597_BUF_BSIZE - 1;
+	else if (check_interrupt(pipenum))
+		buf_bsize = 0;
+	else
+		printk(KERN_ERR "r8a66597: Illegal pipenum (%d)\n", pipenum);
+
+	return buf_bsize;
+}
+
+/* this function must be called with interrupt disabled */
+static void enable_r8a66597_pipe_dma(struct r8a66597 *r8a66597,
+				     struct r8a66597_device *dev,
+				     struct r8a66597_pipe *pipe,
+				     struct urb *urb)
+{
+	int i;
+	struct r8a66597_pipe_info *info = &pipe->info;
+	unsigned short mbw = mbw_value(r8a66597);
+
+	/* pipe dma is only for external controlles */
+	if (r8a66597->pdata->on_chip)
+		return;
+
+	if ((pipe->info.pipenum != 0) && (info->type != R8A66597_INT)) {
+		for (i = 0; i < R8A66597_MAX_DMA_CHANNEL; i++) {
+			if ((r8a66597->dma_map & (1 << i)) != 0)
+				continue;
+
+			dev_info(&dev->udev->dev,
+				 "address %d, EndpointAddress 0x%02x use "
+				 "DMA FIFO\n", usb_pipedevice(urb->pipe),
+				 info->dir_in ?
+				 	USB_ENDPOINT_DIR_MASK + info->epnum
+					: info->epnum);
+
+			r8a66597->dma_map |= 1 << i;
+			dev->dma_map |= 1 << i;
+			set_pipe_reg_addr(pipe, i);
+
+			cfifo_change(r8a66597, 0);
+			r8a66597_mdfy(r8a66597, mbw | pipe->info.pipenum,
+				      mbw | CURPIPE, pipe->fifosel);
+
+			r8a66597_reg_wait(r8a66597, pipe->fifosel, CURPIPE,
+					  pipe->info.pipenum);
+			r8a66597_bset(r8a66597, BCLR, pipe->fifoctr);
+			break;
+		}
+	}
+}
+
+/* this function must be called with interrupt disabled */
+static void enable_r8a66597_pipe(struct r8a66597 *r8a66597, struct urb *urb,
+				 struct usb_host_endpoint *hep,
+				 struct r8a66597_pipe_info *info)
+{
+	struct r8a66597_device *dev = get_urb_to_r8a66597_dev(r8a66597, urb);
+	struct r8a66597_pipe *pipe = hep->hcpriv;
+
+	dev_dbg(&dev->udev->dev, "enable_pipe:\n");
+
+	pipe->info = *info;
+	set_pipe_reg_addr(pipe, R8A66597_PIPE_NO_DMA);
+	r8a66597->pipe_cnt[pipe->info.pipenum]++;
+	dev->pipe_cnt[pipe->info.pipenum]++;
+
+	enable_r8a66597_pipe_dma(r8a66597, dev, pipe, urb);
+}
+
+static void r8a66597_urb_done(struct r8a66597 *r8a66597, struct urb *urb,
+			      int status)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+	if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) {
+		void *ptr;
+
+		for (ptr = urb->transfer_buffer;
+		     ptr < urb->transfer_buffer + urb->transfer_buffer_length;
+		     ptr += PAGE_SIZE)
+			flush_dcache_page(virt_to_page(ptr));
+	}
+
+	usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), urb);
+	spin_unlock(&r8a66597->lock);
+	usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb, status);
+	spin_lock(&r8a66597->lock);
+}
+
+/* this function must be called with interrupt disabled */
+static void force_dequeue(struct r8a66597 *r8a66597, u16 pipenum, u16 address)
+{
+	struct r8a66597_td *td, *next;
+	struct urb *urb;
+	struct list_head *list = &r8a66597->pipe_queue[pipenum];
+
+	if (list_empty(list))
+		return;
+
+	list_for_each_entry_safe(td, next, list, queue) {
+		if (td->address != address)
+			continue;
+
+		urb = td->urb;
+		list_del(&td->queue);
+		kfree(td);
+
+		if (urb)
+			r8a66597_urb_done(r8a66597, urb, -ENODEV);
+
+		break;
+	}
+}
+
+/* this function must be called with interrupt disabled */
+static void disable_r8a66597_pipe_all(struct r8a66597 *r8a66597,
+				      struct r8a66597_device *dev)
+{
+	int check_ep0 = 0;
+	u16 pipenum;
+
+	if (!dev)
+		return;
+
+	for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
+		if (!dev->pipe_cnt[pipenum])
+			continue;
+
+		if (!check_ep0) {
+			check_ep0 = 1;
+			force_dequeue(r8a66597, 0, dev->address);
+		}
+
+		r8a66597->pipe_cnt[pipenum] -= dev->pipe_cnt[pipenum];
+		dev->pipe_cnt[pipenum] = 0;
+		force_dequeue(r8a66597, pipenum, dev->address);
+	}
+
+	dev_dbg(&dev->udev->dev, "disable_pipe\n");
+
+	r8a66597->dma_map &= ~(dev->dma_map);
+	dev->dma_map = 0;
+}
+
+static u16 get_interval(struct urb *urb, __u8 interval)
+{
+	u16 time = 1;
+	int i;
+
+	if (urb->dev->speed == USB_SPEED_HIGH) {
+		if (interval > IITV)
+			time = IITV;
+		else
+			time = interval ? interval - 1 : 0;
+	} else {
+		if (interval > 128) {
+			time = IITV;
+		} else {
+			/* calculate the nearest value for PIPEPERI */
+			for (i = 0; i < 7; i++) {
+				if ((1 << i) < interval &&
+				    (1 << (i + 1) > interval))
+					time = 1 << i;
+			}
+		}
+	}
+
+	return time;
+}
+
+static unsigned long get_timer_interval(struct urb *urb, __u8 interval)
+{
+	__u8 i;
+	unsigned long time = 1;
+
+	if (usb_pipeisoc(urb->pipe))
+		return 0;
+
+	if (get_r8a66597_usb_speed(urb->dev->speed) == HSMODE) {
+		for (i = 0; i < (interval - 1); i++)
+			time *= 2;
+		time = time * 125 / 1000;	/* uSOF -> msec */
+	} else {
+		time = interval;
+	}
+
+	return time;
+}
+
+/* this function must be called with interrupt disabled */
+static void init_pipe_info(struct r8a66597 *r8a66597, struct urb *urb,
+			   struct usb_host_endpoint *hep,
+			   struct usb_endpoint_descriptor *ep)
+{
+	struct r8a66597_pipe_info info;
+
+	info.pipenum = get_empty_pipenum(r8a66597, ep);
+	info.address = get_urb_to_r8a66597_addr(r8a66597, urb);
+	info.epnum = usb_endpoint_num(ep);
+	info.maxpacket = usb_endpoint_maxp(ep);
+	info.type = get_r8a66597_type(usb_endpoint_type(ep));
+	info.bufnum = get_bufnum(info.pipenum);
+	info.buf_bsize = get_buf_bsize(info.pipenum);
+	if (info.type == R8A66597_BULK) {
+		info.interval = 0;
+		info.timer_interval = 0;
+	} else {
+		info.interval = get_interval(urb, ep->bInterval);
+		info.timer_interval = get_timer_interval(urb, ep->bInterval);
+	}
+	if (usb_endpoint_dir_in(ep))
+		info.dir_in = 1;
+	else
+		info.dir_in = 0;
+
+	enable_r8a66597_pipe(r8a66597, urb, hep, &info);
+}
+
+static void init_pipe_config(struct r8a66597 *r8a66597, struct urb *urb)
+{
+	struct r8a66597_device *dev;
+
+	dev = get_urb_to_r8a66597_dev(r8a66597, urb);
+	dev->state = USB_STATE_CONFIGURED;
+}
+
+static void pipe_irq_enable(struct r8a66597 *r8a66597, struct urb *urb,
+			    u16 pipenum)
+{
+	if (pipenum == 0 && usb_pipeout(urb->pipe))
+		enable_irq_empty(r8a66597, pipenum);
+	else
+		enable_irq_ready(r8a66597, pipenum);
+
+	if (!usb_pipeisoc(urb->pipe))
+		enable_irq_nrdy(r8a66597, pipenum);
+}
+
+static void pipe_irq_disable(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	disable_irq_ready(r8a66597, pipenum);
+	disable_irq_nrdy(r8a66597, pipenum);
+}
+
+static void r8a66597_root_hub_start_polling(struct r8a66597 *r8a66597)
+{
+	mod_timer(&r8a66597->rh_timer,
+			jiffies + msecs_to_jiffies(R8A66597_RH_POLL_TIME));
+}
+
+static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port,
+					int connect)
+{
+	struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+
+	rh->old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port)) & LNST;
+	rh->scount = R8A66597_MAX_SAMPLING;
+	if (connect)
+		rh->port |= USB_PORT_STAT_CONNECTION;
+	else
+		rh->port &= ~USB_PORT_STAT_CONNECTION;
+	rh->port |= USB_PORT_STAT_C_CONNECTION << 16;
+
+	r8a66597_root_hub_start_polling(r8a66597);
+}
+
+/* this function must be called with interrupt disabled */
+static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port,
+					u16 syssts)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+	if (syssts == SE0) {
+		r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
+		r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
+	} else {
+		if (syssts == FS_JSTS)
+			r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port));
+		else if (syssts == LS_JSTS)
+			r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port));
+
+		r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port));
+		r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port));
+
+		if (r8a66597->bus_suspended)
+			usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
+	}
+
+	spin_unlock(&r8a66597->lock);
+	usb_hcd_poll_rh_status(r8a66597_to_hcd(r8a66597));
+	spin_lock(&r8a66597->lock);
+}
+
+/* this function must be called with interrupt disabled */
+static void r8a66597_usb_connect(struct r8a66597 *r8a66597, int port)
+{
+	u16 speed = get_rh_usb_speed(r8a66597, port);
+	struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+
+	rh->port &= ~(USB_PORT_STAT_HIGH_SPEED | USB_PORT_STAT_LOW_SPEED);
+	if (speed == HSMODE)
+		rh->port |= USB_PORT_STAT_HIGH_SPEED;
+	else if (speed == LSMODE)
+		rh->port |= USB_PORT_STAT_LOW_SPEED;
+
+	rh->port &= ~USB_PORT_STAT_RESET;
+	rh->port |= USB_PORT_STAT_ENABLE;
+}
+
+/* this function must be called with interrupt disabled */
+static void r8a66597_usb_disconnect(struct r8a66597 *r8a66597, int port)
+{
+	struct r8a66597_device *dev = r8a66597->root_hub[port].dev;
+
+	disable_r8a66597_pipe_all(r8a66597, dev);
+	free_usb_address(r8a66597, dev, 0);
+
+	start_root_hub_sampling(r8a66597, port, 0);
+}
+
+/* this function must be called with interrupt disabled */
+static void prepare_setup_packet(struct r8a66597 *r8a66597,
+				 struct r8a66597_td *td)
+{
+	int i;
+	__le16 *p = (__le16 *)td->urb->setup_packet;
+	unsigned long setup_addr = USBREQ;
+
+	r8a66597_write(r8a66597, make_devsel(td->address) | td->maxpacket,
+		       DCPMAXP);
+	r8a66597_write(r8a66597, ~(SIGN | SACK), INTSTS1);
+
+	for (i = 0; i < 4; i++) {
+		r8a66597_write(r8a66597, le16_to_cpu(p[i]), setup_addr);
+		setup_addr += 2;
+	}
+	r8a66597_write(r8a66597, SUREQ, DCPCTR);
+}
+
+/* this function must be called with interrupt disabled */
+static void prepare_packet_read(struct r8a66597 *r8a66597,
+				struct r8a66597_td *td)
+{
+	struct urb *urb = td->urb;
+
+	if (usb_pipecontrol(urb->pipe)) {
+		r8a66597_bclr(r8a66597, R8A66597_DIR, DCPCFG);
+		r8a66597_mdfy(r8a66597, 0, ISEL | CURPIPE, CFIFOSEL);
+		r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
+		if (urb->actual_length == 0) {
+			r8a66597_pipe_toggle(r8a66597, td->pipe, 1);
+			r8a66597_write(r8a66597, BCLR, CFIFOCTR);
+		}
+		pipe_irq_disable(r8a66597, td->pipenum);
+		pipe_start(r8a66597, td->pipe);
+		pipe_irq_enable(r8a66597, urb, td->pipenum);
+	} else {
+		if (urb->actual_length == 0) {
+			pipe_irq_disable(r8a66597, td->pipenum);
+			pipe_setting(r8a66597, td);
+			pipe_stop(r8a66597, td->pipe);
+			r8a66597_write(r8a66597, ~(1 << td->pipenum), BRDYSTS);
+
+			if (td->pipe->pipetre) {
+				r8a66597_write(r8a66597, TRCLR,
+						td->pipe->pipetre);
+				r8a66597_write(r8a66597,
+						DIV_ROUND_UP
+						  (urb->transfer_buffer_length,
+						   td->maxpacket),
+						td->pipe->pipetrn);
+				r8a66597_bset(r8a66597, TRENB,
+						td->pipe->pipetre);
+			}
+
+			pipe_start(r8a66597, td->pipe);
+			pipe_irq_enable(r8a66597, urb, td->pipenum);
+		}
+	}
+}
+
+/* this function must be called with interrupt disabled */
+static void prepare_packet_write(struct r8a66597 *r8a66597,
+				 struct r8a66597_td *td)
+{
+	u16 tmp;
+	struct urb *urb = td->urb;
+
+	if (usb_pipecontrol(urb->pipe)) {
+		pipe_stop(r8a66597, td->pipe);
+		r8a66597_bset(r8a66597, R8A66597_DIR, DCPCFG);
+		r8a66597_mdfy(r8a66597, ISEL, ISEL | CURPIPE, CFIFOSEL);
+		r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
+		if (urb->actual_length == 0) {
+			r8a66597_pipe_toggle(r8a66597, td->pipe, 1);
+			r8a66597_write(r8a66597, BCLR, CFIFOCTR);
+		}
+	} else {
+		if (urb->actual_length == 0)
+			pipe_setting(r8a66597, td);
+		if (td->pipe->pipetre)
+			r8a66597_bclr(r8a66597, TRENB, td->pipe->pipetre);
+	}
+	r8a66597_write(r8a66597, ~(1 << td->pipenum), BRDYSTS);
+
+	fifo_change_from_pipe(r8a66597, td->pipe);
+	tmp = r8a66597_read(r8a66597, td->pipe->fifoctr);
+	if (unlikely((tmp & FRDY) == 0))
+		pipe_irq_enable(r8a66597, urb, td->pipenum);
+	else
+		packet_write(r8a66597, td->pipenum);
+	pipe_start(r8a66597, td->pipe);
+}
+
+/* this function must be called with interrupt disabled */
+static void prepare_status_packet(struct r8a66597 *r8a66597,
+				  struct r8a66597_td *td)
+{
+	struct urb *urb = td->urb;
+
+	r8a66597_pipe_toggle(r8a66597, td->pipe, 1);
+	pipe_stop(r8a66597, td->pipe);
+
+	if (urb->setup_packet[0] & USB_ENDPOINT_DIR_MASK) {
+		r8a66597_bset(r8a66597, R8A66597_DIR, DCPCFG);
+		r8a66597_mdfy(r8a66597, ISEL, ISEL | CURPIPE, CFIFOSEL);
+		r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
+		r8a66597_write(r8a66597, ~BEMP0, BEMPSTS);
+		r8a66597_write(r8a66597, BCLR | BVAL, CFIFOCTR);
+		enable_irq_empty(r8a66597, 0);
+	} else {
+		r8a66597_bclr(r8a66597, R8A66597_DIR, DCPCFG);
+		r8a66597_mdfy(r8a66597, 0, ISEL | CURPIPE, CFIFOSEL);
+		r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
+		r8a66597_write(r8a66597, BCLR, CFIFOCTR);
+		enable_irq_ready(r8a66597, 0);
+	}
+	enable_irq_nrdy(r8a66597, 0);
+	pipe_start(r8a66597, td->pipe);
+}
+
+static int is_set_address(unsigned char *setup_packet)
+{
+	if (((setup_packet[0] & USB_TYPE_MASK) == USB_TYPE_STANDARD) &&
+			setup_packet[1] == USB_REQ_SET_ADDRESS)
+		return 1;
+	else
+		return 0;
+}
+
+/* this function must be called with interrupt disabled */
+static int start_transfer(struct r8a66597 *r8a66597, struct r8a66597_td *td)
+{
+	BUG_ON(!td);
+
+	switch (td->type) {
+	case USB_PID_SETUP:
+		if (is_set_address(td->urb->setup_packet)) {
+			td->set_address = 1;
+			td->urb->setup_packet[2] = alloc_usb_address(r8a66597,
+								     td->urb);
+			if (td->urb->setup_packet[2] == 0)
+				return -EPIPE;
+		}
+		prepare_setup_packet(r8a66597, td);
+		break;
+	case USB_PID_IN:
+		prepare_packet_read(r8a66597, td);
+		break;
+	case USB_PID_OUT:
+		prepare_packet_write(r8a66597, td);
+		break;
+	case USB_PID_ACK:
+		prepare_status_packet(r8a66597, td);
+		break;
+	default:
+		printk(KERN_ERR "r8a66597: invalid type.\n");
+		break;
+	}
+
+	return 0;
+}
+
+static int check_transfer_finish(struct r8a66597_td *td, struct urb *urb)
+{
+	if (usb_pipeisoc(urb->pipe)) {
+		if (urb->number_of_packets == td->iso_cnt)
+			return 1;
+	}
+
+	/* control or bulk or interrupt */
+	if ((urb->transfer_buffer_length <= urb->actual_length) ||
+	    (td->short_packet) || (td->zero_packet))
+		return 1;
+
+	return 0;
+}
+
+/* this function must be called with interrupt disabled */
+static void set_td_timer(struct r8a66597 *r8a66597, struct r8a66597_td *td)
+{
+	unsigned long time;
+
+	BUG_ON(!td);
+
+	if (!list_empty(&r8a66597->pipe_queue[td->pipenum]) &&
+	    !usb_pipecontrol(td->urb->pipe) && usb_pipein(td->urb->pipe)) {
+		r8a66597->timeout_map |= 1 << td->pipenum;
+		switch (usb_pipetype(td->urb->pipe)) {
+		case PIPE_INTERRUPT:
+		case PIPE_ISOCHRONOUS:
+			time = 30;
+			break;
+		default:
+			time = 50;
+			break;
+		}
+
+		mod_timer(&r8a66597->timers[td->pipenum].td,
+			  jiffies + msecs_to_jiffies(time));
+	}
+}
+
+/* this function must be called with interrupt disabled */
+static void finish_request(struct r8a66597 *r8a66597, struct r8a66597_td *td,
+		u16 pipenum, struct urb *urb, int status)
+__releases(r8a66597->lock) __acquires(r8a66597->lock)
+{
+	int restart = 0;
+	struct usb_hcd *hcd = r8a66597_to_hcd(r8a66597);
+
+	r8a66597->timeout_map &= ~(1 << pipenum);
+
+	if (likely(td)) {
+		if (td->set_address && (status != 0 || urb->unlinked))
+			r8a66597->address_map &= ~(1 << urb->setup_packet[2]);
+
+		pipe_toggle_save(r8a66597, td->pipe, urb);
+		list_del(&td->queue);
+		kfree(td);
+	}
+
+	if (!list_empty(&r8a66597->pipe_queue[pipenum]))
+		restart = 1;
+
+	if (likely(urb)) {
+		if (usb_pipeisoc(urb->pipe))
+			urb->start_frame = r8a66597_get_frame(hcd);
+
+		r8a66597_urb_done(r8a66597, urb, status);
+	}
+
+	if (restart) {
+		td = r8a66597_get_td(r8a66597, pipenum);
+		if (unlikely(!td))
+			return;
+
+		start_transfer(r8a66597, td);
+		set_td_timer(r8a66597, td);
+	}
+}
+
+static void packet_read(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	u16 tmp;
+	int rcv_len, bufsize, urb_len, size;
+	u16 *buf;
+	struct r8a66597_td *td = r8a66597_get_td(r8a66597, pipenum);
+	struct urb *urb;
+	int finish = 0;
+	int status = 0;
+
+	if (unlikely(!td))
+		return;
+	urb = td->urb;
+
+	fifo_change_from_pipe(r8a66597, td->pipe);
+	tmp = r8a66597_read(r8a66597, td->pipe->fifoctr);
+	if (unlikely((tmp & FRDY) == 0)) {
+		pipe_stop(r8a66597, td->pipe);
+		pipe_irq_disable(r8a66597, pipenum);
+		printk(KERN_ERR "r8a66597: in fifo not ready (%d)\n", pipenum);
+		finish_request(r8a66597, td, pipenum, td->urb, -EPIPE);
+		return;
+	}
+
+	/* prepare parameters */
+	rcv_len = tmp & DTLN;
+	if (usb_pipeisoc(urb->pipe)) {
+		buf = (u16 *)(urb->transfer_buffer +
+				urb->iso_frame_desc[td->iso_cnt].offset);
+		urb_len = urb->iso_frame_desc[td->iso_cnt].length;
+	} else {
+		buf = (void *)urb->transfer_buffer + urb->actual_length;
+		urb_len = urb->transfer_buffer_length - urb->actual_length;
+	}
+	bufsize = min(urb_len, (int) td->maxpacket);
+	if (rcv_len <= bufsize) {
+		size = rcv_len;
+	} else {
+		size = bufsize;
+		status = -EOVERFLOW;
+		finish = 1;
+	}
+
+	/* update parameters */
+	urb->actual_length += size;
+	if (rcv_len == 0)
+		td->zero_packet = 1;
+	if (rcv_len < bufsize) {
+		td->short_packet = 1;
+	}
+	if (usb_pipeisoc(urb->pipe)) {
+		urb->iso_frame_desc[td->iso_cnt].actual_length = size;
+		urb->iso_frame_desc[td->iso_cnt].status = status;
+		td->iso_cnt++;
+		finish = 0;
+	}
+
+	/* check transfer finish */
+	if (finish || check_transfer_finish(td, urb)) {
+		pipe_stop(r8a66597, td->pipe);
+		pipe_irq_disable(r8a66597, pipenum);
+		finish = 1;
+	}
+
+	/* read fifo */
+	if (urb->transfer_buffer) {
+		if (size == 0)
+			r8a66597_write(r8a66597, BCLR, td->pipe->fifoctr);
+		else
+			r8a66597_read_fifo(r8a66597, td->pipe->fifoaddr,
+					   buf, size);
+	}
+
+	if (finish && pipenum != 0)
+		finish_request(r8a66597, td, pipenum, urb, status);
+}
+
+static void packet_write(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	u16 tmp;
+	int bufsize, size;
+	u16 *buf;
+	struct r8a66597_td *td = r8a66597_get_td(r8a66597, pipenum);
+	struct urb *urb;
+
+	if (unlikely(!td))
+		return;
+	urb = td->urb;
+
+	fifo_change_from_pipe(r8a66597, td->pipe);
+	tmp = r8a66597_read(r8a66597, td->pipe->fifoctr);
+	if (unlikely((tmp & FRDY) == 0)) {
+		pipe_stop(r8a66597, td->pipe);
+		pipe_irq_disable(r8a66597, pipenum);
+		printk(KERN_ERR "r8a66597: out fifo not ready (%d)\n", pipenum);
+		finish_request(r8a66597, td, pipenum, urb, -EPIPE);
+		return;
+	}
+
+	/* prepare parameters */
+	bufsize = td->maxpacket;
+	if (usb_pipeisoc(urb->pipe)) {
+		buf = (u16 *)(urb->transfer_buffer +
+				urb->iso_frame_desc[td->iso_cnt].offset);
+		size = min(bufsize,
+			   (int)urb->iso_frame_desc[td->iso_cnt].length);
+	} else {
+		buf = (u16 *)(urb->transfer_buffer + urb->actual_length);
+		size = min_t(u32, bufsize,
+			   urb->transfer_buffer_length - urb->actual_length);
+	}
+
+	/* write fifo */
+	if (pipenum > 0)
+		r8a66597_write(r8a66597, ~(1 << pipenum), BEMPSTS);
+	if (urb->transfer_buffer) {
+		r8a66597_write_fifo(r8a66597, td->pipe, buf, size);
+		if (!usb_pipebulk(urb->pipe) || td->maxpacket != size)
+			r8a66597_write(r8a66597, BVAL, td->pipe->fifoctr);
+	}
+
+	/* update parameters */
+	urb->actual_length += size;
+	if (usb_pipeisoc(urb->pipe)) {
+		urb->iso_frame_desc[td->iso_cnt].actual_length = size;
+		urb->iso_frame_desc[td->iso_cnt].status = 0;
+		td->iso_cnt++;
+	}
+
+	/* check transfer finish */
+	if (check_transfer_finish(td, urb)) {
+		disable_irq_ready(r8a66597, pipenum);
+		enable_irq_empty(r8a66597, pipenum);
+		if (!usb_pipeisoc(urb->pipe))
+			enable_irq_nrdy(r8a66597, pipenum);
+	} else
+		pipe_irq_enable(r8a66597, urb, pipenum);
+}
+
+
+static void check_next_phase(struct r8a66597 *r8a66597, int status)
+{
+	struct r8a66597_td *td = r8a66597_get_td(r8a66597, 0);
+	struct urb *urb;
+	u8 finish = 0;
+
+	if (unlikely(!td))
+		return;
+	urb = td->urb;
+
+	switch (td->type) {
+	case USB_PID_IN:
+	case USB_PID_OUT:
+		if (check_transfer_finish(td, urb))
+			td->type = USB_PID_ACK;
+		break;
+	case USB_PID_SETUP:
+		if (urb->transfer_buffer_length == urb->actual_length)
+			td->type = USB_PID_ACK;
+		else if (usb_pipeout(urb->pipe))
+			td->type = USB_PID_OUT;
+		else
+			td->type = USB_PID_IN;
+		break;
+	case USB_PID_ACK:
+		finish = 1;
+		break;
+	}
+
+	if (finish || status != 0 || urb->unlinked)
+		finish_request(r8a66597, td, 0, urb, status);
+	else
+		start_transfer(r8a66597, td);
+}
+
+static int get_urb_error(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	struct r8a66597_td *td = r8a66597_get_td(r8a66597, pipenum);
+
+	if (td) {
+		u16 pid = r8a66597_read(r8a66597, td->pipe->pipectr) & PID;
+
+		if (pid == PID_NAK)
+			return -ECONNRESET;
+		else
+			return -EPIPE;
+	}
+	return 0;
+}
+
+static void irq_pipe_ready(struct r8a66597 *r8a66597)
+{
+	u16 check;
+	u16 pipenum;
+	u16 mask;
+	struct r8a66597_td *td;
+
+	mask = r8a66597_read(r8a66597, BRDYSTS)
+	       & r8a66597_read(r8a66597, BRDYENB);
+	r8a66597_write(r8a66597, ~mask, BRDYSTS);
+	if (mask & BRDY0) {
+		td = r8a66597_get_td(r8a66597, 0);
+		if (td && td->type == USB_PID_IN)
+			packet_read(r8a66597, 0);
+		else
+			pipe_irq_disable(r8a66597, 0);
+		check_next_phase(r8a66597, 0);
+	}
+
+	for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
+		check = 1 << pipenum;
+		if (mask & check) {
+			td = r8a66597_get_td(r8a66597, pipenum);
+			if (unlikely(!td))
+				continue;
+
+			if (td->type == USB_PID_IN)
+				packet_read(r8a66597, pipenum);
+			else if (td->type == USB_PID_OUT)
+				packet_write(r8a66597, pipenum);
+		}
+	}
+}
+
+static void irq_pipe_empty(struct r8a66597 *r8a66597)
+{
+	u16 tmp;
+	u16 check;
+	u16 pipenum;
+	u16 mask;
+	struct r8a66597_td *td;
+
+	mask = r8a66597_read(r8a66597, BEMPSTS)
+	       & r8a66597_read(r8a66597, BEMPENB);
+	r8a66597_write(r8a66597, ~mask, BEMPSTS);
+	if (mask & BEMP0) {
+		cfifo_change(r8a66597, 0);
+		td = r8a66597_get_td(r8a66597, 0);
+		if (td && td->type != USB_PID_OUT)
+			disable_irq_empty(r8a66597, 0);
+		check_next_phase(r8a66597, 0);
+	}
+
+	for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
+		check = 1 << pipenum;
+		if (mask &  check) {
+			struct r8a66597_td *td;
+			td = r8a66597_get_td(r8a66597, pipenum);
+			if (unlikely(!td))
+				continue;
+
+			tmp = r8a66597_read(r8a66597, td->pipe->pipectr);
+			if ((tmp & INBUFM) == 0) {
+				disable_irq_empty(r8a66597, pipenum);
+				pipe_irq_disable(r8a66597, pipenum);
+				finish_request(r8a66597, td, pipenum, td->urb,
+						0);
+			}
+		}
+	}
+}
+
+static void irq_pipe_nrdy(struct r8a66597 *r8a66597)
+{
+	u16 check;
+	u16 pipenum;
+	u16 mask;
+	int status;
+
+	mask = r8a66597_read(r8a66597, NRDYSTS)
+	       & r8a66597_read(r8a66597, NRDYENB);
+	r8a66597_write(r8a66597, ~mask, NRDYSTS);
+	if (mask & NRDY0) {
+		cfifo_change(r8a66597, 0);
+		status = get_urb_error(r8a66597, 0);
+		pipe_irq_disable(r8a66597, 0);
+		check_next_phase(r8a66597, status);
+	}
+
+	for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
+		check = 1 << pipenum;
+		if (mask & check) {
+			struct r8a66597_td *td;
+			td = r8a66597_get_td(r8a66597, pipenum);
+			if (unlikely(!td))
+				continue;
+
+			status = get_urb_error(r8a66597, pipenum);
+			pipe_irq_disable(r8a66597, pipenum);
+			pipe_stop(r8a66597, td->pipe);
+			finish_request(r8a66597, td, pipenum, td->urb, status);
+		}
+	}
+}
+
+static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
+{
+	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
+	u16 intsts0, intsts1, intsts2;
+	u16 intenb0, intenb1, intenb2;
+	u16 mask0, mask1, mask2;
+	int status;
+
+	spin_lock(&r8a66597->lock);
+
+	intsts0 = r8a66597_read(r8a66597, INTSTS0);
+	intsts1 = r8a66597_read(r8a66597, INTSTS1);
+	intsts2 = r8a66597_read(r8a66597, INTSTS2);
+	intenb0 = r8a66597_read(r8a66597, INTENB0);
+	intenb1 = r8a66597_read(r8a66597, INTENB1);
+	intenb2 = r8a66597_read(r8a66597, INTENB2);
+
+	mask2 = intsts2 & intenb2;
+	mask1 = intsts1 & intenb1;
+	mask0 = intsts0 & intenb0 & (BEMP | NRDY | BRDY);
+	if (mask2) {
+		if (mask2 & ATTCH) {
+			r8a66597_write(r8a66597, ~ATTCH, INTSTS2);
+			r8a66597_bclr(r8a66597, ATTCHE, INTENB2);
+
+			/* start usb bus sampling */
+			start_root_hub_sampling(r8a66597, 1, 1);
+		}
+		if (mask2 & DTCH) {
+			r8a66597_write(r8a66597, ~DTCH, INTSTS2);
+			r8a66597_bclr(r8a66597, DTCHE, INTENB2);
+			r8a66597_usb_disconnect(r8a66597, 1);
+		}
+		if (mask2 & BCHG) {
+			r8a66597_write(r8a66597, ~BCHG, INTSTS2);
+			r8a66597_bclr(r8a66597, BCHGE, INTENB2);
+			usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
+		}
+	}
+
+	if (mask1) {
+		if (mask1 & ATTCH) {
+			r8a66597_write(r8a66597, ~ATTCH, INTSTS1);
+			r8a66597_bclr(r8a66597, ATTCHE, INTENB1);
+
+			/* start usb bus sampling */
+			start_root_hub_sampling(r8a66597, 0, 1);
+		}
+		if (mask1 & DTCH) {
+			r8a66597_write(r8a66597, ~DTCH, INTSTS1);
+			r8a66597_bclr(r8a66597, DTCHE, INTENB1);
+			r8a66597_usb_disconnect(r8a66597, 0);
+		}
+		if (mask1 & BCHG) {
+			r8a66597_write(r8a66597, ~BCHG, INTSTS1);
+			r8a66597_bclr(r8a66597, BCHGE, INTENB1);
+			usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
+		}
+
+		if (mask1 & SIGN) {
+			r8a66597_write(r8a66597, ~SIGN, INTSTS1);
+			status = get_urb_error(r8a66597, 0);
+			check_next_phase(r8a66597, status);
+		}
+		if (mask1 & SACK) {
+			r8a66597_write(r8a66597, ~SACK, INTSTS1);
+			check_next_phase(r8a66597, 0);
+		}
+	}
+	if (mask0) {
+		if (mask0 & BRDY)
+			irq_pipe_ready(r8a66597);
+		if (mask0 & BEMP)
+			irq_pipe_empty(r8a66597);
+		if (mask0 & NRDY)
+			irq_pipe_nrdy(r8a66597);
+	}
+
+	spin_unlock(&r8a66597->lock);
+	return IRQ_HANDLED;
+}
+
+/* this function must be called with interrupt disabled */
+static void r8a66597_root_hub_control(struct r8a66597 *r8a66597, int port)
+{
+	u16 tmp;
+	struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+
+	if (rh->port & USB_PORT_STAT_RESET) {
+		unsigned long dvstctr_reg = get_dvstctr_reg(port);
+
+		tmp = r8a66597_read(r8a66597, dvstctr_reg);
+		if ((tmp & USBRST) == USBRST) {
+			r8a66597_mdfy(r8a66597, UACT, USBRST | UACT,
+				      dvstctr_reg);
+			r8a66597_root_hub_start_polling(r8a66597);
+		} else
+			r8a66597_usb_connect(r8a66597, port);
+	}
+
+	if (!(rh->port & USB_PORT_STAT_CONNECTION)) {
+		r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
+		r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
+	}
+
+	if (rh->scount > 0) {
+		tmp = r8a66597_read(r8a66597, get_syssts_reg(port)) & LNST;
+		if (tmp == rh->old_syssts) {
+			rh->scount--;
+			if (rh->scount == 0)
+				r8a66597_check_syssts(r8a66597, port, tmp);
+			else
+				r8a66597_root_hub_start_polling(r8a66597);
+		} else {
+			rh->scount = R8A66597_MAX_SAMPLING;
+			rh->old_syssts = tmp;
+			r8a66597_root_hub_start_polling(r8a66597);
+		}
+	}
+}
+
+static void r8a66597_interval_timer(struct timer_list *t)
+{
+	struct r8a66597_timers *timers = from_timer(timers, t, interval);
+	struct r8a66597 *r8a66597 = timers->r8a66597;
+	unsigned long flags;
+	u16 pipenum;
+	struct r8a66597_td *td;
+
+	spin_lock_irqsave(&r8a66597->lock, flags);
+
+	for (pipenum = 0; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
+		if (!(r8a66597->interval_map & (1 << pipenum)))
+			continue;
+		if (timer_pending(&r8a66597->timers[pipenum].interval))
+			continue;
+
+		td = r8a66597_get_td(r8a66597, pipenum);
+		if (td)
+			start_transfer(r8a66597, td);
+	}
+
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
+}
+
+static void r8a66597_td_timer(struct timer_list *t)
+{
+	struct r8a66597_timers *timers = from_timer(timers, t, td);
+	struct r8a66597 *r8a66597 = timers->r8a66597;
+	unsigned long flags;
+	u16 pipenum;
+	struct r8a66597_td *td, *new_td = NULL;
+	struct r8a66597_pipe *pipe;
+
+	spin_lock_irqsave(&r8a66597->lock, flags);
+	for (pipenum = 0; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
+		if (!(r8a66597->timeout_map & (1 << pipenum)))
+			continue;
+		if (timer_pending(&r8a66597->timers[pipenum].td))
+			continue;
+
+		td = r8a66597_get_td(r8a66597, pipenum);
+		if (!td) {
+			r8a66597->timeout_map &= ~(1 << pipenum);
+			continue;
+		}
+
+		if (td->urb->actual_length) {
+			set_td_timer(r8a66597, td);
+			break;
+		}
+
+		pipe = td->pipe;
+		pipe_stop(r8a66597, pipe);
+
+		/* Select a different address or endpoint */
+		new_td = td;
+		do {
+			list_move_tail(&new_td->queue,
+				       &r8a66597->pipe_queue[pipenum]);
+			new_td = r8a66597_get_td(r8a66597, pipenum);
+			if (!new_td) {
+				new_td = td;
+				break;
+			}
+		} while (td != new_td && td->address == new_td->address &&
+			td->pipe->info.epnum == new_td->pipe->info.epnum);
+
+		start_transfer(r8a66597, new_td);
+
+		if (td == new_td)
+			r8a66597->timeout_map &= ~(1 << pipenum);
+		else
+			set_td_timer(r8a66597, new_td);
+		break;
+	}
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
+}
+
+static void r8a66597_timer(struct timer_list *t)
+{
+	struct r8a66597 *r8a66597 = from_timer(r8a66597, t, rh_timer);
+	unsigned long flags;
+	int port;
+
+	spin_lock_irqsave(&r8a66597->lock, flags);
+
+	for (port = 0; port < r8a66597->max_root_hub; port++)
+		r8a66597_root_hub_control(r8a66597, port);
+
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
+}
+
+static int check_pipe_config(struct r8a66597 *r8a66597, struct urb *urb)
+{
+	struct r8a66597_device *dev = get_urb_to_r8a66597_dev(r8a66597, urb);
+
+	if (dev && dev->address && dev->state != USB_STATE_CONFIGURED &&
+	    (urb->dev->state == USB_STATE_CONFIGURED))
+		return 1;
+	else
+		return 0;
+}
+
+static int r8a66597_start(struct usb_hcd *hcd)
+{
+	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
+
+	hcd->state = HC_STATE_RUNNING;
+	return enable_controller(r8a66597);
+}
+
+static void r8a66597_stop(struct usb_hcd *hcd)
+{
+	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
+
+	disable_controller(r8a66597);
+}
+
+static void set_address_zero(struct r8a66597 *r8a66597, struct urb *urb)
+{
+	unsigned int usb_address = usb_pipedevice(urb->pipe);
+	u16 root_port, hub_port;
+
+	if (usb_address == 0) {
+		get_port_number(r8a66597, urb->dev->devpath,
+				&root_port, &hub_port);
+		set_devadd_reg(r8a66597, 0,
+			       get_r8a66597_usb_speed(urb->dev->speed),
+			       get_parent_r8a66597_address(r8a66597, urb->dev),
+			       hub_port, root_port);
+	}
+}
+
+static struct r8a66597_td *r8a66597_make_td(struct r8a66597 *r8a66597,
+					    struct urb *urb,
+					    struct usb_host_endpoint *hep)
+{
+	struct r8a66597_td *td;
+	u16 pipenum;
+
+	td = kzalloc(sizeof(struct r8a66597_td), GFP_ATOMIC);
+	if (td == NULL)
+		return NULL;
+
+	pipenum = r8a66597_get_pipenum(urb, hep);
+	td->pipenum = pipenum;
+	td->pipe = hep->hcpriv;
+	td->urb = urb;
+	td->address = get_urb_to_r8a66597_addr(r8a66597, urb);
+	td->maxpacket = usb_maxpacket(urb->dev, urb->pipe);
+	if (usb_pipecontrol(urb->pipe))
+		td->type = USB_PID_SETUP;
+	else if (usb_pipein(urb->pipe))
+		td->type = USB_PID_IN;
+	else
+		td->type = USB_PID_OUT;
+	INIT_LIST_HEAD(&td->queue);
+
+	return td;
+}
+
+static int r8a66597_urb_enqueue(struct usb_hcd *hcd,
+				struct urb *urb,
+				gfp_t mem_flags)
+{
+	struct usb_host_endpoint *hep = urb->ep;
+	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
+	struct r8a66597_td *td = NULL;
+	int ret, request = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&r8a66597->lock, flags);
+	if (!get_urb_to_r8a66597_dev(r8a66597, urb)) {
+		ret = -ENODEV;
+		goto error_not_linked;
+	}
+
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret)
+		goto error_not_linked;
+
+	if (!hep->hcpriv) {
+		hep->hcpriv = kzalloc(sizeof(struct r8a66597_pipe),
+				GFP_ATOMIC);
+		if (!hep->hcpriv) {
+			ret = -ENOMEM;
+			goto error;
+		}
+		set_pipe_reg_addr(hep->hcpriv, R8A66597_PIPE_NO_DMA);
+		if (usb_pipeendpoint(urb->pipe))
+			init_pipe_info(r8a66597, urb, hep, &hep->desc);
+	}
+
+	if (unlikely(check_pipe_config(r8a66597, urb)))
+		init_pipe_config(r8a66597, urb);
+
+	set_address_zero(r8a66597, urb);
+	td = r8a66597_make_td(r8a66597, urb, hep);
+	if (td == NULL) {
+		ret = -ENOMEM;
+		goto error;
+	}
+	if (list_empty(&r8a66597->pipe_queue[td->pipenum]))
+		request = 1;
+	list_add_tail(&td->queue, &r8a66597->pipe_queue[td->pipenum]);
+	urb->hcpriv = td;
+
+	if (request) {
+		if (td->pipe->info.timer_interval) {
+			r8a66597->interval_map |= 1 << td->pipenum;
+			mod_timer(&r8a66597->timers[td->pipenum].interval,
+				  jiffies + msecs_to_jiffies(
+					td->pipe->info.timer_interval));
+		} else {
+			ret = start_transfer(r8a66597, td);
+			if (ret < 0) {
+				list_del(&td->queue);
+				kfree(td);
+			}
+		}
+	} else
+		set_td_timer(r8a66597, td);
+
+error:
+	if (ret)
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+error_not_linked:
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
+	return ret;
+}
+
+static int r8a66597_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+		int status)
+{
+	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
+	struct r8a66597_td *td;
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&r8a66597->lock, flags);
+	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (rc)
+		goto done;
+
+	if (urb->hcpriv) {
+		td = urb->hcpriv;
+		pipe_stop(r8a66597, td->pipe);
+		pipe_irq_disable(r8a66597, td->pipenum);
+		disable_irq_empty(r8a66597, td->pipenum);
+		finish_request(r8a66597, td, td->pipenum, urb, status);
+	}
+ done:
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
+	return rc;
+}
+
+static void r8a66597_endpoint_disable(struct usb_hcd *hcd,
+				      struct usb_host_endpoint *hep)
+__acquires(r8a66597->lock)
+__releases(r8a66597->lock)
+{
+	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
+	struct r8a66597_pipe *pipe = (struct r8a66597_pipe *)hep->hcpriv;
+	struct r8a66597_td *td;
+	struct urb *urb = NULL;
+	u16 pipenum;
+	unsigned long flags;
+
+	if (pipe == NULL)
+		return;
+	pipenum = pipe->info.pipenum;
+
+	spin_lock_irqsave(&r8a66597->lock, flags);
+	if (pipenum == 0) {
+		kfree(hep->hcpriv);
+		hep->hcpriv = NULL;
+		spin_unlock_irqrestore(&r8a66597->lock, flags);
+		return;
+	}
+
+	pipe_stop(r8a66597, pipe);
+	pipe_irq_disable(r8a66597, pipenum);
+	disable_irq_empty(r8a66597, pipenum);
+	td = r8a66597_get_td(r8a66597, pipenum);
+	if (td)
+		urb = td->urb;
+	finish_request(r8a66597, td, pipenum, urb, -ESHUTDOWN);
+	kfree(hep->hcpriv);
+	hep->hcpriv = NULL;
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
+}
+
+static int r8a66597_get_frame(struct usb_hcd *hcd)
+{
+	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
+	return r8a66597_read(r8a66597, FRMNUM) & 0x03FF;
+}
+
+static void collect_usb_address_map(struct usb_device *udev, unsigned long *map)
+{
+	int chix;
+	struct usb_device *childdev;
+
+	if (udev->state == USB_STATE_CONFIGURED &&
+	    udev->parent && udev->parent->devnum > 1 &&
+	    udev->parent->descriptor.bDeviceClass == USB_CLASS_HUB)
+		map[udev->devnum/32] |= (1 << (udev->devnum % 32));
+
+	usb_hub_for_each_child(udev, chix, childdev)
+		collect_usb_address_map(childdev, map);
+}
+
+/* this function must be called with interrupt disabled */
+static struct r8a66597_device *get_r8a66597_device(struct r8a66597 *r8a66597,
+						   int addr)
+{
+	struct r8a66597_device *dev;
+	struct list_head *list = &r8a66597->child_device;
+
+	list_for_each_entry(dev, list, device_list) {
+		if (dev->usb_address != addr)
+			continue;
+
+		return dev;
+	}
+
+	printk(KERN_ERR "r8a66597: get_r8a66597_device fail.(%d)\n", addr);
+	return NULL;
+}
+
+static void update_usb_address_map(struct r8a66597 *r8a66597,
+				   struct usb_device *root_hub,
+				   unsigned long *map)
+{
+	int i, j, addr;
+	unsigned long diff;
+	unsigned long flags;
+
+	for (i = 0; i < 4; i++) {
+		diff = r8a66597->child_connect_map[i] ^ map[i];
+		if (!diff)
+			continue;
+
+		for (j = 0; j < 32; j++) {
+			if (!(diff & (1 << j)))
+				continue;
+
+			addr = i * 32 + j;
+			if (map[i] & (1 << j))
+				set_child_connect_map(r8a66597, addr);
+			else {
+				struct r8a66597_device *dev;
+
+				spin_lock_irqsave(&r8a66597->lock, flags);
+				dev = get_r8a66597_device(r8a66597, addr);
+				disable_r8a66597_pipe_all(r8a66597, dev);
+				free_usb_address(r8a66597, dev, 0);
+				put_child_connect_map(r8a66597, addr);
+				spin_unlock_irqrestore(&r8a66597->lock, flags);
+			}
+		}
+	}
+}
+
+static void r8a66597_check_detect_child(struct r8a66597 *r8a66597,
+					struct usb_hcd *hcd)
+{
+	struct usb_bus *bus;
+	unsigned long now_map[4];
+
+	memset(now_map, 0, sizeof(now_map));
+
+	mutex_lock(&usb_bus_idr_lock);
+	bus = idr_find(&usb_bus_idr, hcd->self.busnum);
+	if (bus && bus->root_hub) {
+		collect_usb_address_map(bus->root_hub, now_map);
+		update_usb_address_map(r8a66597, bus->root_hub, now_map);
+	}
+	mutex_unlock(&usb_bus_idr_lock);
+}
+
+static int r8a66597_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
+	unsigned long flags;
+	int i;
+
+	r8a66597_check_detect_child(r8a66597, hcd);
+
+	spin_lock_irqsave(&r8a66597->lock, flags);
+
+	*buf = 0;	/* initialize (no change) */
+
+	for (i = 0; i < r8a66597->max_root_hub; i++) {
+		if (r8a66597->root_hub[i].port & 0xffff0000)
+			*buf |= 1 << (i + 1);
+	}
+
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
+
+	return (*buf != 0);
+}
+
+static void r8a66597_hub_descriptor(struct r8a66597 *r8a66597,
+				    struct usb_hub_descriptor *desc)
+{
+	desc->bDescriptorType = USB_DT_HUB;
+	desc->bHubContrCurrent = 0;
+	desc->bNbrPorts = r8a66597->max_root_hub;
+	desc->bDescLength = 9;
+	desc->bPwrOn2PwrGood = 0;
+	desc->wHubCharacteristics =
+		cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM);
+	desc->u.hs.DeviceRemovable[0] =
+		((1 << r8a66597->max_root_hub) - 1) << 1;
+	desc->u.hs.DeviceRemovable[1] = ~0;
+}
+
+static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+				u16 wIndex, char *buf, u16 wLength)
+{
+	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
+	int ret;
+	int port = (wIndex & 0x00FF) - 1;
+	struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+	unsigned long flags;
+
+	ret = 0;
+
+	spin_lock_irqsave(&r8a66597->lock, flags);
+	switch (typeReq) {
+	case ClearHubFeature:
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if (wIndex > r8a66597->max_root_hub)
+			goto error;
+		if (wLength != 0)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			rh->port &= ~USB_PORT_STAT_POWER;
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			break;
+		case USB_PORT_FEAT_POWER:
+			r8a66597_port_power(r8a66597, port, 0);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_SUSPEND:
+		case USB_PORT_FEAT_C_CONNECTION:
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+		case USB_PORT_FEAT_C_RESET:
+			break;
+		default:
+			goto error;
+		}
+		rh->port &= ~(1 << wValue);
+		break;
+	case GetHubDescriptor:
+		r8a66597_hub_descriptor(r8a66597,
+					(struct usb_hub_descriptor *)buf);
+		break;
+	case GetHubStatus:
+		*buf = 0x00;
+		break;
+	case GetPortStatus:
+		if (wIndex > r8a66597->max_root_hub)
+			goto error;
+		*(__le32 *)buf = cpu_to_le32(rh->port);
+		break;
+	case SetPortFeature:
+		if (wIndex > r8a66597->max_root_hub)
+			goto error;
+		if (wLength != 0)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			break;
+		case USB_PORT_FEAT_POWER:
+			r8a66597_port_power(r8a66597, port, 1);
+			rh->port |= USB_PORT_STAT_POWER;
+			break;
+		case USB_PORT_FEAT_RESET: {
+			struct r8a66597_device *dev = rh->dev;
+
+			rh->port |= USB_PORT_STAT_RESET;
+
+			disable_r8a66597_pipe_all(r8a66597, dev);
+			free_usb_address(r8a66597, dev, 1);
+
+			r8a66597_mdfy(r8a66597, USBRST, USBRST | UACT,
+				      get_dvstctr_reg(port));
+			mod_timer(&r8a66597->rh_timer,
+				  jiffies + msecs_to_jiffies(50));
+			}
+			break;
+		default:
+			goto error;
+		}
+		rh->port |= 1 << wValue;
+		break;
+	default:
+error:
+		ret = -EPIPE;
+		break;
+	}
+
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
+	return ret;
+}
+
+#if defined(CONFIG_PM)
+static int r8a66597_bus_suspend(struct usb_hcd *hcd)
+{
+	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
+	int port;
+
+	dev_dbg(&r8a66597->device0.udev->dev, "%s\n", __func__);
+
+	for (port = 0; port < r8a66597->max_root_hub; port++) {
+		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+		unsigned long dvstctr_reg = get_dvstctr_reg(port);
+
+		if (!(rh->port & USB_PORT_STAT_ENABLE))
+			continue;
+
+		dev_dbg(&rh->dev->udev->dev, "suspend port = %d\n", port);
+		r8a66597_bclr(r8a66597, UACT, dvstctr_reg);	/* suspend */
+		rh->port |= USB_PORT_STAT_SUSPEND;
+
+		if (rh->dev->udev->do_remote_wakeup) {
+			msleep(3);	/* waiting last SOF */
+			r8a66597_bset(r8a66597, RWUPE, dvstctr_reg);
+			r8a66597_write(r8a66597, ~BCHG, get_intsts_reg(port));
+			r8a66597_bset(r8a66597, BCHGE, get_intenb_reg(port));
+		}
+	}
+
+	r8a66597->bus_suspended = 1;
+
+	return 0;
+}
+
+static int r8a66597_bus_resume(struct usb_hcd *hcd)
+{
+	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
+	int port;
+
+	dev_dbg(&r8a66597->device0.udev->dev, "%s\n", __func__);
+
+	for (port = 0; port < r8a66597->max_root_hub; port++) {
+		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+		unsigned long dvstctr_reg = get_dvstctr_reg(port);
+
+		if (!(rh->port & USB_PORT_STAT_SUSPEND))
+			continue;
+
+		dev_dbg(&rh->dev->udev->dev, "resume port = %d\n", port);
+		rh->port &= ~USB_PORT_STAT_SUSPEND;
+		rh->port |= USB_PORT_STAT_C_SUSPEND << 16;
+		r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg);
+		msleep(USB_RESUME_TIMEOUT);
+		r8a66597_mdfy(r8a66597, UACT, RESUME | UACT, dvstctr_reg);
+	}
+
+	return 0;
+
+}
+#else
+#define	r8a66597_bus_suspend	NULL
+#define	r8a66597_bus_resume	NULL
+#endif
+
+static const struct hc_driver r8a66597_hc_driver = {
+	.description =		hcd_name,
+	.hcd_priv_size =	sizeof(struct r8a66597),
+	.irq =			r8a66597_irq,
+
+	/*
+	 * generic hardware linkage
+	 */
+	.flags =		HCD_USB2,
+
+	.start =		r8a66597_start,
+	.stop =			r8a66597_stop,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		r8a66597_urb_enqueue,
+	.urb_dequeue =		r8a66597_urb_dequeue,
+	.endpoint_disable =	r8a66597_endpoint_disable,
+
+	/*
+	 * periodic schedule support
+	 */
+	.get_frame_number =	r8a66597_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	r8a66597_hub_status_data,
+	.hub_control =		r8a66597_hub_control,
+	.bus_suspend =		r8a66597_bus_suspend,
+	.bus_resume =		r8a66597_bus_resume,
+};
+
+#if defined(CONFIG_PM)
+static int r8a66597_suspend(struct device *dev)
+{
+	struct r8a66597		*r8a66597 = dev_get_drvdata(dev);
+	int port;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	disable_controller(r8a66597);
+
+	for (port = 0; port < r8a66597->max_root_hub; port++) {
+		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+
+		rh->port = 0x00000000;
+	}
+
+	return 0;
+}
+
+static int r8a66597_resume(struct device *dev)
+{
+	struct r8a66597		*r8a66597 = dev_get_drvdata(dev);
+	struct usb_hcd		*hcd = r8a66597_to_hcd(r8a66597);
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	enable_controller(r8a66597);
+	usb_root_hub_lost_power(hcd->self.root_hub);
+
+	return 0;
+}
+
+static const struct dev_pm_ops r8a66597_dev_pm_ops = {
+	.suspend = r8a66597_suspend,
+	.resume = r8a66597_resume,
+	.poweroff = r8a66597_suspend,
+	.restore = r8a66597_resume,
+};
+
+#define R8A66597_DEV_PM_OPS	(&r8a66597_dev_pm_ops)
+#else	/* if defined(CONFIG_PM) */
+#define R8A66597_DEV_PM_OPS	NULL
+#endif
+
+static int r8a66597_remove(struct platform_device *pdev)
+{
+	struct r8a66597		*r8a66597 = platform_get_drvdata(pdev);
+	struct usb_hcd		*hcd = r8a66597_to_hcd(r8a66597);
+
+	del_timer_sync(&r8a66597->rh_timer);
+	usb_remove_hcd(hcd);
+	iounmap(r8a66597->reg);
+	if (r8a66597->pdata->on_chip)
+		clk_put(r8a66597->clk);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+static int r8a66597_probe(struct platform_device *pdev)
+{
+	char clk_name[8];
+	struct resource *res = NULL, *ires;
+	int irq = -1;
+	void __iomem *reg = NULL;
+	struct usb_hcd *hcd = NULL;
+	struct r8a66597 *r8a66597;
+	int ret = 0;
+	int i;
+	unsigned long irq_trigger;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev, "platform_get_resource error.\n");
+		goto clean_up;
+	}
+
+	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!ires) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev,
+			"platform_get_resource IORESOURCE_IRQ error.\n");
+		goto clean_up;
+	}
+
+	irq = ires->start;
+	irq_trigger = ires->flags & IRQF_TRIGGER_MASK;
+
+	reg = ioremap(res->start, resource_size(res));
+	if (reg == NULL) {
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "ioremap error.\n");
+		goto clean_up;
+	}
+
+	if (pdev->dev.platform_data == NULL) {
+		dev_err(&pdev->dev, "no platform data\n");
+		ret = -ENODEV;
+		goto clean_up;
+	}
+
+	/* initialize hcd */
+	hcd = usb_create_hcd(&r8a66597_hc_driver, &pdev->dev, (char *)hcd_name);
+	if (!hcd) {
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "Failed to create hcd\n");
+		goto clean_up;
+	}
+	r8a66597 = hcd_to_r8a66597(hcd);
+	memset(r8a66597, 0, sizeof(struct r8a66597));
+	platform_set_drvdata(pdev, r8a66597);
+	r8a66597->pdata = dev_get_platdata(&pdev->dev);
+	r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
+
+	if (r8a66597->pdata->on_chip) {
+		snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
+		r8a66597->clk = clk_get(&pdev->dev, clk_name);
+		if (IS_ERR(r8a66597->clk)) {
+			dev_err(&pdev->dev, "cannot get clock \"%s\"\n",
+				clk_name);
+			ret = PTR_ERR(r8a66597->clk);
+			goto clean_up2;
+		}
+		r8a66597->max_root_hub = 1;
+	} else
+		r8a66597->max_root_hub = 2;
+
+	spin_lock_init(&r8a66597->lock);
+	timer_setup(&r8a66597->rh_timer, r8a66597_timer, 0);
+	r8a66597->reg = reg;
+
+	/* make sure no interrupts are pending */
+	ret = r8a66597_clock_enable(r8a66597);
+	if (ret < 0)
+		goto clean_up3;
+	disable_controller(r8a66597);
+
+	for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) {
+		INIT_LIST_HEAD(&r8a66597->pipe_queue[i]);
+		r8a66597->timers[i].r8a66597 = r8a66597;
+		timer_setup(&r8a66597->timers[i].td, r8a66597_td_timer, 0);
+		timer_setup(&r8a66597->timers[i].interval,
+			    r8a66597_interval_timer, 0);
+	}
+	INIT_LIST_HEAD(&r8a66597->child_device);
+
+	hcd->rsrc_start = res->start;
+	hcd->has_tt = 1;
+
+	ret = usb_add_hcd(hcd, irq, irq_trigger);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to add hcd\n");
+		goto clean_up3;
+	}
+	device_wakeup_enable(hcd->self.controller);
+
+	return 0;
+
+clean_up3:
+	if (r8a66597->pdata->on_chip)
+		clk_put(r8a66597->clk);
+clean_up2:
+	usb_put_hcd(hcd);
+
+clean_up:
+	if (reg)
+		iounmap(reg);
+
+	return ret;
+}
+
+static struct platform_driver r8a66597_driver = {
+	.probe =	r8a66597_probe,
+	.remove =	r8a66597_remove,
+	.driver		= {
+		.name = hcd_name,
+		.pm	= R8A66597_DEV_PM_OPS,
+	},
+};
+
+module_platform_driver(r8a66597_driver);
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
new file mode 100644
index 000000000..ab081475c
--- /dev/null
+++ b/drivers/usb/host/r8a66597.h
@@ -0,0 +1,339 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * R8A66597 HCD (Host Controller Driver)
+ *
+ * Copyright (C) 2006-2007 Renesas Solutions Corp.
+ * Portions Copyright (C) 2004 Psion Teklogix (for NetBook PRO)
+ * Portions Copyright (C) 2004-2005 David Brownell
+ * Portions Copyright (C) 1999 Roman Weissgaerber
+ *
+ * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ */
+
+#ifndef __R8A66597_H__
+#define __R8A66597_H__
+
+#include <linux/clk.h>
+#include <linux/usb/r8a66597.h>
+
+#define R8A66597_MAX_NUM_PIPE		10
+#define R8A66597_BUF_BSIZE		8
+#define R8A66597_MAX_DEVICE		10
+#define R8A66597_MAX_ROOT_HUB		2
+#define R8A66597_MAX_SAMPLING		5
+#define R8A66597_RH_POLL_TIME		10
+#define R8A66597_MAX_DMA_CHANNEL	2
+#define R8A66597_PIPE_NO_DMA		R8A66597_MAX_DMA_CHANNEL
+#define check_bulk_or_isoc(pipenum)	((pipenum >= 1 && pipenum <= 5))
+#define check_interrupt(pipenum)	((pipenum >= 6 && pipenum <= 9))
+#define make_devsel(addr)		(addr << 12)
+
+struct r8a66597_pipe_info {
+	unsigned long timer_interval;
+	u16 pipenum;
+	u16 address;	/* R8A66597 HCD usb address */
+	u16 epnum;
+	u16 maxpacket;
+	u16 type;
+	u16 bufnum;
+	u16 buf_bsize;
+	u16 interval;
+	u16 dir_in;
+};
+
+struct r8a66597_pipe {
+	struct r8a66597_pipe_info info;
+
+	unsigned long fifoaddr;
+	unsigned long fifosel;
+	unsigned long fifoctr;
+	unsigned long pipectr;
+	unsigned long pipetre;
+	unsigned long pipetrn;
+};
+
+struct r8a66597_td {
+	struct r8a66597_pipe *pipe;
+	struct urb *urb;
+	struct list_head queue;
+
+	u16 type;
+	u16 pipenum;
+	int iso_cnt;
+
+	u16 address;		/* R8A66597's USB address */
+	u16 maxpacket;
+
+	unsigned zero_packet:1;
+	unsigned short_packet:1;
+	unsigned set_address:1;
+};
+
+struct r8a66597_device {
+	u16	address;	/* R8A66597's USB address */
+	u16	hub_port;
+	u16	root_port;
+
+	unsigned short ep_in_toggle;
+	unsigned short ep_out_toggle;
+	unsigned char pipe_cnt[R8A66597_MAX_NUM_PIPE];
+	unsigned char dma_map;
+
+	enum usb_device_state state;
+
+	struct usb_device *udev;
+	int usb_address;
+	struct list_head device_list;
+};
+
+struct r8a66597_root_hub {
+	u32 port;
+	u16 old_syssts;
+	int scount;
+
+	struct r8a66597_device	*dev;
+};
+
+struct r8a66597;
+
+struct r8a66597_timers {
+	struct timer_list td;
+	struct timer_list interval;
+	struct r8a66597 *r8a66597;
+};
+
+struct r8a66597 {
+	spinlock_t lock;
+	void __iomem *reg;
+	struct clk *clk;
+	struct r8a66597_platdata	*pdata;
+	struct r8a66597_device		device0;
+	struct r8a66597_root_hub	root_hub[R8A66597_MAX_ROOT_HUB];
+	struct list_head		pipe_queue[R8A66597_MAX_NUM_PIPE];
+
+	struct timer_list rh_timer;
+	struct r8a66597_timers timers[R8A66597_MAX_NUM_PIPE];
+
+	unsigned short address_map;
+	unsigned short timeout_map;
+	unsigned short interval_map;
+	unsigned char pipe_cnt[R8A66597_MAX_NUM_PIPE];
+	unsigned char dma_map;
+	unsigned int max_root_hub;
+
+	struct list_head child_device;
+	unsigned long child_connect_map[4];
+
+	unsigned bus_suspended:1;
+	unsigned irq_sense_low:1;
+};
+
+static inline struct r8a66597 *hcd_to_r8a66597(struct usb_hcd *hcd)
+{
+	return (struct r8a66597 *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *r8a66597_to_hcd(struct r8a66597 *r8a66597)
+{
+	return container_of((void *)r8a66597, struct usb_hcd, hcd_priv);
+}
+
+static inline struct r8a66597_td *r8a66597_get_td(struct r8a66597 *r8a66597,
+						  u16 pipenum)
+{
+	if (unlikely(list_empty(&r8a66597->pipe_queue[pipenum])))
+		return NULL;
+
+	return list_entry(r8a66597->pipe_queue[pipenum].next,
+			  struct r8a66597_td, queue);
+}
+
+static inline struct urb *r8a66597_get_urb(struct r8a66597 *r8a66597,
+					   u16 pipenum)
+{
+	struct r8a66597_td *td;
+
+	td = r8a66597_get_td(r8a66597, pipenum);
+	return (td ? td->urb : NULL);
+}
+
+static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
+{
+	return ioread16(r8a66597->reg + offset);
+}
+
+static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
+				      unsigned long offset, u16 *buf,
+				      int len)
+{
+	void __iomem *fifoaddr = r8a66597->reg + offset;
+	unsigned long count;
+
+	if (r8a66597->pdata->on_chip) {
+		count = len / 4;
+		ioread32_rep(fifoaddr, buf, count);
+
+		if (len & 0x00000003) {
+			unsigned long tmp = ioread32(fifoaddr);
+			memcpy((unsigned char *)buf + count * 4, &tmp,
+			       len & 0x03);
+		}
+	} else {
+		len = (len + 1) / 2;
+		ioread16_rep(fifoaddr, buf, len);
+	}
+}
+
+static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
+				  unsigned long offset)
+{
+	iowrite16(val, r8a66597->reg + offset);
+}
+
+static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
+				 u16 val, u16 pat, unsigned long offset)
+{
+	u16 tmp;
+	tmp = r8a66597_read(r8a66597, offset);
+	tmp = tmp & (~pat);
+	tmp = tmp | val;
+	r8a66597_write(r8a66597, tmp, offset);
+}
+
+#define r8a66597_bclr(r8a66597, val, offset)	\
+			r8a66597_mdfy(r8a66597, 0, val, offset)
+#define r8a66597_bset(r8a66597, val, offset)	\
+			r8a66597_mdfy(r8a66597, val, 0, offset)
+
+static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
+				       struct r8a66597_pipe *pipe, u16 *buf,
+				       int len)
+{
+	void __iomem *fifoaddr = r8a66597->reg + pipe->fifoaddr;
+	unsigned long count;
+	unsigned char *pb;
+	int i;
+
+	if (r8a66597->pdata->on_chip) {
+		count = len / 4;
+		iowrite32_rep(fifoaddr, buf, count);
+
+		if (len & 0x00000003) {
+			pb = (unsigned char *)buf + count * 4;
+			for (i = 0; i < (len & 0x00000003); i++) {
+				if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
+					iowrite8(pb[i], fifoaddr + i);
+				else
+					iowrite8(pb[i], fifoaddr + 3 - i);
+			}
+		}
+	} else {
+		int odd = len & 0x0001;
+
+		len = len / 2;
+		iowrite16_rep(fifoaddr, buf, len);
+		if (unlikely(odd)) {
+			buf = &buf[len];
+			if (r8a66597->pdata->wr0_shorted_to_wr1)
+				r8a66597_bclr(r8a66597, MBW_16, pipe->fifosel);
+			iowrite8((unsigned char)*buf, fifoaddr);
+			if (r8a66597->pdata->wr0_shorted_to_wr1)
+				r8a66597_bset(r8a66597, MBW_16, pipe->fifosel);
+		}
+	}
+}
+
+static inline unsigned long get_syscfg_reg(int port)
+{
+	return port == 0 ? SYSCFG0 : SYSCFG1;
+}
+
+static inline unsigned long get_syssts_reg(int port)
+{
+	return port == 0 ? SYSSTS0 : SYSSTS1;
+}
+
+static inline unsigned long get_dvstctr_reg(int port)
+{
+	return port == 0 ? DVSTCTR0 : DVSTCTR1;
+}
+
+static inline unsigned long get_dmacfg_reg(int port)
+{
+	return port == 0 ? DMA0CFG : DMA1CFG;
+}
+
+static inline unsigned long get_intenb_reg(int port)
+{
+	return port == 0 ? INTENB1 : INTENB2;
+}
+
+static inline unsigned long get_intsts_reg(int port)
+{
+	return port == 0 ? INTSTS1 : INTSTS2;
+}
+
+static inline u16 get_rh_usb_speed(struct r8a66597 *r8a66597, int port)
+{
+	unsigned long dvstctr_reg = get_dvstctr_reg(port);
+
+	return r8a66597_read(r8a66597, dvstctr_reg) & RHST;
+}
+
+static inline void r8a66597_port_power(struct r8a66597 *r8a66597, int port,
+				       int power)
+{
+	unsigned long dvstctr_reg = get_dvstctr_reg(port);
+
+	if (r8a66597->pdata->port_power) {
+		r8a66597->pdata->port_power(port, power);
+	} else {
+		if (power)
+			r8a66597_bset(r8a66597, VBOUT, dvstctr_reg);
+		else
+			r8a66597_bclr(r8a66597, VBOUT, dvstctr_reg);
+	}
+}
+
+static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata)
+{
+	u16 clock = 0;
+
+	switch (pdata->xtal) {
+	case R8A66597_PLATDATA_XTAL_12MHZ:
+		clock = XTAL12;
+		break;
+	case R8A66597_PLATDATA_XTAL_24MHZ:
+		clock = XTAL24;
+		break;
+	case R8A66597_PLATDATA_XTAL_48MHZ:
+		clock = XTAL48;
+		break;
+	default:
+		printk(KERN_ERR "r8a66597: platdata clock is wrong.\n");
+		break;
+	}
+
+	return clock;
+}
+
+#define get_pipectr_addr(pipenum)	(PIPE1CTR + (pipenum - 1) * 2)
+#define get_pipetre_addr(pipenum)	(PIPE1TRE + (pipenum - 1) * 4)
+#define get_pipetrn_addr(pipenum)	(PIPE1TRN + (pipenum - 1) * 4)
+#define get_devadd_addr(address)	(DEVADD0 + address * 2)
+
+#define enable_irq_ready(r8a66597, pipenum)	\
+	enable_pipe_irq(r8a66597, pipenum, BRDYENB)
+#define disable_irq_ready(r8a66597, pipenum)	\
+	disable_pipe_irq(r8a66597, pipenum, BRDYENB)
+#define enable_irq_empty(r8a66597, pipenum)	\
+	enable_pipe_irq(r8a66597, pipenum, BEMPENB)
+#define disable_irq_empty(r8a66597, pipenum)	\
+	disable_pipe_irq(r8a66597, pipenum, BEMPENB)
+#define enable_irq_nrdy(r8a66597, pipenum)	\
+	enable_pipe_irq(r8a66597, pipenum, NRDYENB)
+#define disable_irq_nrdy(r8a66597, pipenum)	\
+	disable_pipe_irq(r8a66597, pipenum, NRDYENB)
+
+#endif	/* __R8A66597_H__ */
+
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
new file mode 100644
index 000000000..b8b90eec9
--- /dev/null
+++ b/drivers/usb/host/sl811-hcd.c
@@ -0,0 +1,1796 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SL811HS HCD (Host Controller Driver) for USB.
+ *
+ * Copyright (C) 2004 Psion Teklogix (for NetBook PRO)
+ * Copyright (C) 2004-2005 David Brownell
+ *
+ * Periodic scheduling is based on Roman's OHCI code
+ * 	Copyright (C) 1999 Roman Weissgaerber
+ *
+ * The SL811HS controller handles host side USB (like the SL11H, but with
+ * another register set and SOF generation) as well as peripheral side USB
+ * (like the SL811S).  This driver version doesn't implement the Gadget API
+ * for the peripheral role; or OTG (that'd need much external circuitry).
+ *
+ * For documentation, see the SL811HS spec and the "SL811HS Embedded Host"
+ * document (providing significant pieces missing from that spec); plus
+ * the SL811S spec if you want peripheral side info.
+ */
+
+/*
+ * Status:  Passed basic stress testing, works with hubs, mice, keyboards,
+ * and usb-storage.
+ *
+ * TODO:
+ * - usb suspend/resume triggered by sl811
+ * - various issues noted in the code
+ * - performance work; use both register banks; ...
+ * - use urb->iso_frame_desc[] with ISO transfers
+ */
+
+#undef	VERBOSE
+#undef	PACKET_TRACE
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/usb/sl811.h>
+#include <linux/usb/hcd.h>
+#include <linux/platform_device.h>
+#include <linux/prefetch.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+#include "sl811.h"
+
+
+MODULE_DESCRIPTION("SL811HS USB Host Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sl811-hcd");
+
+#define DRIVER_VERSION	"19 May 2005"
+
+/* for now, use only one transfer register bank */
+#undef	USE_B
+
+// #define	QUIRK2
+#define	QUIRK3
+
+static const char hcd_name[] = "sl811-hcd";
+
+/*-------------------------------------------------------------------------*/
+
+static void port_power(struct sl811 *sl811, int is_on)
+{
+	struct usb_hcd	*hcd = sl811_to_hcd(sl811);
+
+	/* hub is inactive unless the port is powered */
+	if (is_on) {
+		if (sl811->port1 & USB_PORT_STAT_POWER)
+			return;
+
+		sl811->port1 = USB_PORT_STAT_POWER;
+		sl811->irq_enable = SL11H_INTMASK_INSRMV;
+	} else {
+		sl811->port1 = 0;
+		sl811->irq_enable = 0;
+		hcd->state = HC_STATE_HALT;
+	}
+	sl811->ctrl1 = 0;
+	sl811_write(sl811, SL11H_IRQ_ENABLE, 0);
+	sl811_write(sl811, SL11H_IRQ_STATUS, ~0);
+
+	if (sl811->board && sl811->board->port_power) {
+		/* switch VBUS, at 500mA unless hub power budget gets set */
+		dev_dbg(hcd->self.controller, "power %s\n",
+			is_on ? "on" : "off");
+		sl811->board->port_power(hcd->self.controller, is_on);
+	}
+
+	/* reset as thoroughly as we can */
+	if (sl811->board && sl811->board->reset)
+		sl811->board->reset(hcd->self.controller);
+	else {
+		sl811_write(sl811, SL11H_CTLREG1, SL11H_CTL1MASK_SE0);
+		mdelay(20);
+	}
+
+	sl811_write(sl811, SL11H_IRQ_ENABLE, 0);
+	sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
+	sl811_write(sl811, SL811HS_CTLREG2, SL811HS_CTL2_INIT);
+	sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable);
+
+	// if !is_on, put into lowpower mode now
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* This is a PIO-only HCD.  Queueing appends URBs to the endpoint's queue,
+ * and may start I/O.  Endpoint queues are scanned during completion irq
+ * handlers (one per packet: ACK, NAK, faults, etc) and urb cancellation.
+ *
+ * Using an external DMA engine to copy a packet at a time could work,
+ * though setup/teardown costs may be too big to make it worthwhile.
+ */
+
+/* SETUP starts a new control request.  Devices are not allowed to
+ * STALL or NAK these; they must cancel any pending control requests.
+ */
+static void setup_packet(
+	struct sl811		*sl811,
+	struct sl811h_ep	*ep,
+	struct urb		*urb,
+	u8			bank,
+	u8			control
+)
+{
+	u8			addr;
+	u8			len;
+	void __iomem		*data_reg;
+
+	addr = SL811HS_PACKET_BUF(bank == 0);
+	len = sizeof(struct usb_ctrlrequest);
+	data_reg = sl811->data_reg;
+	sl811_write_buf(sl811, addr, urb->setup_packet, len);
+
+	/* autoincrementing */
+	sl811_write(sl811, bank + SL11H_BUFADDRREG, addr);
+	writeb(len, data_reg);
+	writeb(SL_SETUP /* | ep->epnum */, data_reg);
+	writeb(usb_pipedevice(urb->pipe), data_reg);
+
+	/* always OUT/data0 */
+	sl811_write(sl811, bank + SL11H_HOSTCTLREG,
+			control | SL11H_HCTLMASK_OUT);
+	ep->length = 0;
+	PACKET("SETUP qh%p\n", ep);
+}
+
+/* STATUS finishes control requests, often after IN or OUT data packets */
+static void status_packet(
+	struct sl811		*sl811,
+	struct sl811h_ep	*ep,
+	struct urb		*urb,
+	u8			bank,
+	u8			control
+)
+{
+	int			do_out;
+	void __iomem		*data_reg;
+
+	do_out = urb->transfer_buffer_length && usb_pipein(urb->pipe);
+	data_reg = sl811->data_reg;
+
+	/* autoincrementing */
+	sl811_write(sl811, bank + SL11H_BUFADDRREG, 0);
+	writeb(0, data_reg);
+	writeb((do_out ? SL_OUT : SL_IN) /* | ep->epnum */, data_reg);
+	writeb(usb_pipedevice(urb->pipe), data_reg);
+
+	/* always data1; sometimes IN */
+	control |= SL11H_HCTLMASK_TOGGLE;
+	if (do_out)
+		control |= SL11H_HCTLMASK_OUT;
+	sl811_write(sl811, bank + SL11H_HOSTCTLREG, control);
+	ep->length = 0;
+	PACKET("STATUS%s/%s qh%p\n", ep->nak_count ? "/retry" : "",
+			do_out ? "out" : "in", ep);
+}
+
+/* IN packets can be used with any type of endpoint. here we just
+ * start the transfer, data from the peripheral may arrive later.
+ * urb->iso_frame_desc is currently ignored here...
+ */
+static void in_packet(
+	struct sl811		*sl811,
+	struct sl811h_ep	*ep,
+	struct urb		*urb,
+	u8			bank,
+	u8			control
+)
+{
+	u8			addr;
+	u8			len;
+	void __iomem		*data_reg;
+
+	/* avoid losing data on overflow */
+	len = ep->maxpacket;
+	addr = SL811HS_PACKET_BUF(bank == 0);
+	if (!(control & SL11H_HCTLMASK_ISOCH)
+			&& usb_gettoggle(urb->dev, ep->epnum, 0))
+		control |= SL11H_HCTLMASK_TOGGLE;
+	data_reg = sl811->data_reg;
+
+	/* autoincrementing */
+	sl811_write(sl811, bank + SL11H_BUFADDRREG, addr);
+	writeb(len, data_reg);
+	writeb(SL_IN | ep->epnum, data_reg);
+	writeb(usb_pipedevice(urb->pipe), data_reg);
+
+	sl811_write(sl811, bank + SL11H_HOSTCTLREG, control);
+	ep->length = min_t(u32, len,
+			urb->transfer_buffer_length - urb->actual_length);
+	PACKET("IN%s/%d qh%p len%d\n", ep->nak_count ? "/retry" : "",
+			!!usb_gettoggle(urb->dev, ep->epnum, 0), ep, len);
+}
+
+/* OUT packets can be used with any type of endpoint.
+ * urb->iso_frame_desc is currently ignored here...
+ */
+static void out_packet(
+	struct sl811		*sl811,
+	struct sl811h_ep	*ep,
+	struct urb		*urb,
+	u8			bank,
+	u8			control
+)
+{
+	void			*buf;
+	u8			addr;
+	u8			len;
+	void __iomem		*data_reg;
+
+	buf = urb->transfer_buffer + urb->actual_length;
+	prefetch(buf);
+
+	len = min_t(u32, ep->maxpacket,
+			urb->transfer_buffer_length - urb->actual_length);
+
+	if (!(control & SL11H_HCTLMASK_ISOCH)
+			&& usb_gettoggle(urb->dev, ep->epnum, 1))
+		control |= SL11H_HCTLMASK_TOGGLE;
+	addr = SL811HS_PACKET_BUF(bank == 0);
+	data_reg = sl811->data_reg;
+
+	sl811_write_buf(sl811, addr, buf, len);
+
+	/* autoincrementing */
+	sl811_write(sl811, bank + SL11H_BUFADDRREG, addr);
+	writeb(len, data_reg);
+	writeb(SL_OUT | ep->epnum, data_reg);
+	writeb(usb_pipedevice(urb->pipe), data_reg);
+
+	sl811_write(sl811, bank + SL11H_HOSTCTLREG,
+			control | SL11H_HCTLMASK_OUT);
+	ep->length = len;
+	PACKET("OUT%s/%d qh%p len%d\n", ep->nak_count ? "/retry" : "",
+			!!usb_gettoggle(urb->dev, ep->epnum, 1), ep, len);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* caller updates on-chip enables later */
+
+static inline void sofirq_on(struct sl811 *sl811)
+{
+	if (sl811->irq_enable & SL11H_INTMASK_SOFINTR)
+		return;
+	dev_dbg(sl811_to_hcd(sl811)->self.controller, "sof irq on\n");
+	sl811->irq_enable |= SL11H_INTMASK_SOFINTR;
+}
+
+static inline void sofirq_off(struct sl811 *sl811)
+{
+	if (!(sl811->irq_enable & SL11H_INTMASK_SOFINTR))
+		return;
+	dev_dbg(sl811_to_hcd(sl811)->self.controller, "sof irq off\n");
+	sl811->irq_enable &= ~SL11H_INTMASK_SOFINTR;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* pick the next endpoint for a transaction, and issue it.
+ * frames start with periodic transfers (after whatever is pending
+ * from the previous frame), and the rest of the time is async
+ * transfers, scheduled round-robin.
+ */
+static struct sl811h_ep	*start(struct sl811 *sl811, u8 bank)
+{
+	struct sl811h_ep	*ep;
+	struct urb		*urb;
+	int			fclock;
+	u8			control;
+
+	/* use endpoint at schedule head */
+	if (sl811->next_periodic) {
+		ep = sl811->next_periodic;
+		sl811->next_periodic = ep->next;
+	} else {
+		if (sl811->next_async)
+			ep = sl811->next_async;
+		else if (!list_empty(&sl811->async))
+			ep = container_of(sl811->async.next,
+					struct sl811h_ep, schedule);
+		else {
+			/* could set up the first fullspeed periodic
+			 * transfer for the next frame ...
+			 */
+			return NULL;
+		}
+
+#ifdef USE_B
+		if ((bank && sl811->active_b == ep) || sl811->active_a == ep)
+			return NULL;
+#endif
+
+		if (ep->schedule.next == &sl811->async)
+			sl811->next_async = NULL;
+		else
+			sl811->next_async = container_of(ep->schedule.next,
+					struct sl811h_ep, schedule);
+	}
+
+	if (unlikely(list_empty(&ep->hep->urb_list))) {
+		dev_dbg(sl811_to_hcd(sl811)->self.controller,
+			"empty %p queue?\n", ep);
+		return NULL;
+	}
+
+	urb = container_of(ep->hep->urb_list.next, struct urb, urb_list);
+	control = ep->defctrl;
+
+	/* if this frame doesn't have enough time left to transfer this
+	 * packet, wait till the next frame.  too-simple algorithm...
+	 */
+	fclock = sl811_read(sl811, SL11H_SOFTMRREG) << 6;
+	fclock -= 100;		/* setup takes not much time */
+	if (urb->dev->speed == USB_SPEED_LOW) {
+		if (control & SL11H_HCTLMASK_PREAMBLE) {
+			/* also note erratum 1: some hubs won't work */
+			fclock -= 800;
+		}
+		fclock -= ep->maxpacket << 8;
+
+		/* erratum 2: AFTERSOF only works for fullspeed */
+		if (fclock < 0) {
+			if (ep->period)
+				sl811->stat_overrun++;
+			sofirq_on(sl811);
+			return NULL;
+		}
+	} else {
+		fclock -= 12000 / 19;	/* 19 64byte packets/msec */
+		if (fclock < 0) {
+			if (ep->period)
+				sl811->stat_overrun++;
+			control |= SL11H_HCTLMASK_AFTERSOF;
+
+		/* throttle bulk/control irq noise */
+		} else if (ep->nak_count)
+			control |= SL11H_HCTLMASK_AFTERSOF;
+	}
+
+
+	switch (ep->nextpid) {
+	case USB_PID_IN:
+		in_packet(sl811, ep, urb, bank, control);
+		break;
+	case USB_PID_OUT:
+		out_packet(sl811, ep, urb, bank, control);
+		break;
+	case USB_PID_SETUP:
+		setup_packet(sl811, ep, urb, bank, control);
+		break;
+	case USB_PID_ACK:		/* for control status */
+		status_packet(sl811, ep, urb, bank, control);
+		break;
+	default:
+		dev_dbg(sl811_to_hcd(sl811)->self.controller,
+			"bad ep%p pid %02x\n", ep, ep->nextpid);
+		ep = NULL;
+	}
+	return ep;
+}
+
+#define MIN_JIFFIES	((msecs_to_jiffies(2) > 1) ? msecs_to_jiffies(2) : 2)
+
+static inline void start_transfer(struct sl811 *sl811)
+{
+	if (sl811->port1 & USB_PORT_STAT_SUSPEND)
+		return;
+	if (sl811->active_a == NULL) {
+		sl811->active_a = start(sl811, SL811_EP_A(SL811_HOST_BUF));
+		if (sl811->active_a != NULL)
+			sl811->jiffies_a = jiffies + MIN_JIFFIES;
+	}
+#ifdef USE_B
+	if (sl811->active_b == NULL) {
+		sl811->active_b = start(sl811, SL811_EP_B(SL811_HOST_BUF));
+		if (sl811->active_b != NULL)
+			sl811->jiffies_b = jiffies + MIN_JIFFIES;
+	}
+#endif
+}
+
+static void finish_request(
+	struct sl811		*sl811,
+	struct sl811h_ep	*ep,
+	struct urb		*urb,
+	int			status
+) __releases(sl811->lock) __acquires(sl811->lock)
+{
+	unsigned		i;
+
+	if (usb_pipecontrol(urb->pipe))
+		ep->nextpid = USB_PID_SETUP;
+
+	usb_hcd_unlink_urb_from_ep(sl811_to_hcd(sl811), urb);
+	spin_unlock(&sl811->lock);
+	usb_hcd_giveback_urb(sl811_to_hcd(sl811), urb, status);
+	spin_lock(&sl811->lock);
+
+	/* leave active endpoints in the schedule */
+	if (!list_empty(&ep->hep->urb_list))
+		return;
+
+	/* async deschedule? */
+	if (!list_empty(&ep->schedule)) {
+		list_del_init(&ep->schedule);
+		if (ep == sl811->next_async)
+			sl811->next_async = NULL;
+		return;
+	}
+
+	/* periodic deschedule */
+	dev_dbg(sl811_to_hcd(sl811)->self.controller,
+		"deschedule qh%d/%p branch %d\n", ep->period, ep, ep->branch);
+	for (i = ep->branch; i < PERIODIC_SIZE; i += ep->period) {
+		struct sl811h_ep	*temp;
+		struct sl811h_ep	**prev = &sl811->periodic[i];
+
+		while (*prev && ((temp = *prev) != ep))
+			prev = &temp->next;
+		if (*prev)
+			*prev = ep->next;
+		sl811->load[i] -= ep->load;
+	}
+	ep->branch = PERIODIC_SIZE;
+	sl811->periodic_count--;
+	sl811_to_hcd(sl811)->self.bandwidth_allocated
+		-= ep->load / ep->period;
+	if (ep == sl811->next_periodic)
+		sl811->next_periodic = ep->next;
+
+	/* we might turn SOFs back on again for the async schedule */
+	if (sl811->periodic_count == 0)
+		sofirq_off(sl811);
+}
+
+static void
+done(struct sl811 *sl811, struct sl811h_ep *ep, u8 bank)
+{
+	u8			status;
+	struct urb		*urb;
+	int			urbstat = -EINPROGRESS;
+
+	if (unlikely(!ep))
+		return;
+
+	status = sl811_read(sl811, bank + SL11H_PKTSTATREG);
+
+	urb = container_of(ep->hep->urb_list.next, struct urb, urb_list);
+
+	/* we can safely ignore NAKs */
+	if (status & SL11H_STATMASK_NAK) {
+		// PACKET("...NAK_%02x qh%p\n", bank, ep);
+		if (!ep->period)
+			ep->nak_count++;
+		ep->error_count = 0;
+
+	/* ACK advances transfer, toggle, and maybe queue */
+	} else if (status & SL11H_STATMASK_ACK) {
+		struct usb_device	*udev = urb->dev;
+		int			len;
+		unsigned char		*buf;
+
+		/* urb->iso_frame_desc is currently ignored here... */
+
+		ep->nak_count = ep->error_count = 0;
+		switch (ep->nextpid) {
+		case USB_PID_OUT:
+			// PACKET("...ACK/out_%02x qh%p\n", bank, ep);
+			urb->actual_length += ep->length;
+			usb_dotoggle(udev, ep->epnum, 1);
+			if (urb->actual_length
+					== urb->transfer_buffer_length) {
+				if (usb_pipecontrol(urb->pipe))
+					ep->nextpid = USB_PID_ACK;
+
+				/* some bulk protocols terminate OUT transfers
+				 * by a short packet, using ZLPs not padding.
+				 */
+				else if (ep->length < ep->maxpacket
+						|| !(urb->transfer_flags
+							& URB_ZERO_PACKET))
+					urbstat = 0;
+			}
+			break;
+		case USB_PID_IN:
+			// PACKET("...ACK/in_%02x qh%p\n", bank, ep);
+			buf = urb->transfer_buffer + urb->actual_length;
+			prefetchw(buf);
+			len = ep->maxpacket - sl811_read(sl811,
+						bank + SL11H_XFERCNTREG);
+			if (len > ep->length) {
+				len = ep->length;
+				urbstat = -EOVERFLOW;
+			}
+			urb->actual_length += len;
+			sl811_read_buf(sl811, SL811HS_PACKET_BUF(bank == 0),
+					buf, len);
+			usb_dotoggle(udev, ep->epnum, 0);
+			if (urbstat == -EINPROGRESS &&
+					(len < ep->maxpacket ||
+						urb->actual_length ==
+						urb->transfer_buffer_length)) {
+				if (usb_pipecontrol(urb->pipe))
+					ep->nextpid = USB_PID_ACK;
+				else
+					urbstat = 0;
+			}
+			break;
+		case USB_PID_SETUP:
+			// PACKET("...ACK/setup_%02x qh%p\n", bank, ep);
+			if (urb->transfer_buffer_length == urb->actual_length)
+				ep->nextpid = USB_PID_ACK;
+			else if (usb_pipeout(urb->pipe)) {
+				usb_settoggle(udev, 0, 1, 1);
+				ep->nextpid = USB_PID_OUT;
+			} else {
+				usb_settoggle(udev, 0, 0, 1);
+				ep->nextpid = USB_PID_IN;
+			}
+			break;
+		case USB_PID_ACK:
+			// PACKET("...ACK/status_%02x qh%p\n", bank, ep);
+			urbstat = 0;
+			break;
+		}
+
+	/* STALL stops all transfers */
+	} else if (status & SL11H_STATMASK_STALL) {
+		PACKET("...STALL_%02x qh%p\n", bank, ep);
+		ep->nak_count = ep->error_count = 0;
+		urbstat = -EPIPE;
+
+	/* error? retry, until "3 strikes" */
+	} else if (++ep->error_count >= 3) {
+		if (status & SL11H_STATMASK_TMOUT)
+			urbstat = -ETIME;
+		else if (status & SL11H_STATMASK_OVF)
+			urbstat = -EOVERFLOW;
+		else
+			urbstat = -EPROTO;
+		ep->error_count = 0;
+		PACKET("...3STRIKES_%02x %02x qh%p stat %d\n",
+				bank, status, ep, urbstat);
+	}
+
+	if (urbstat != -EINPROGRESS || urb->unlinked)
+		finish_request(sl811, ep, urb, urbstat);
+}
+
+static inline u8 checkdone(struct sl811 *sl811)
+{
+	u8	ctl;
+	u8	irqstat = 0;
+
+	if (sl811->active_a && time_before_eq(sl811->jiffies_a, jiffies)) {
+		ctl = sl811_read(sl811, SL811_EP_A(SL11H_HOSTCTLREG));
+		if (ctl & SL11H_HCTLMASK_ARM)
+			sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG), 0);
+		dev_dbg(sl811_to_hcd(sl811)->self.controller,
+			"%s DONE_A: ctrl %02x sts %02x\n",
+			(ctl & SL11H_HCTLMASK_ARM) ? "timeout" : "lost",
+			ctl,
+			sl811_read(sl811, SL811_EP_A(SL11H_PKTSTATREG)));
+		irqstat |= SL11H_INTMASK_DONE_A;
+	}
+#ifdef	USE_B
+	if (sl811->active_b && time_before_eq(sl811->jiffies_b, jiffies)) {
+		ctl = sl811_read(sl811, SL811_EP_B(SL11H_HOSTCTLREG));
+		if (ctl & SL11H_HCTLMASK_ARM)
+			sl811_write(sl811, SL811_EP_B(SL11H_HOSTCTLREG), 0);
+		dev_dbg(sl811_to_hcd(sl811)->self.controller,
+			"%s DONE_B: ctrl %02x sts %02x\n",
+			(ctl & SL11H_HCTLMASK_ARM) ? "timeout" : "lost",
+			ctl,
+			sl811_read(sl811, SL811_EP_B(SL11H_PKTSTATREG)));
+		irqstat |= SL11H_INTMASK_DONE_A;
+	}
+#endif
+	return irqstat;
+}
+
+static irqreturn_t sl811h_irq(struct usb_hcd *hcd)
+{
+	struct sl811	*sl811 = hcd_to_sl811(hcd);
+	u8		irqstat;
+	irqreturn_t	ret = IRQ_NONE;
+	unsigned	retries = 5;
+
+	spin_lock(&sl811->lock);
+
+retry:
+	irqstat = sl811_read(sl811, SL11H_IRQ_STATUS) & ~SL11H_INTMASK_DP;
+	if (irqstat) {
+		sl811_write(sl811, SL11H_IRQ_STATUS, irqstat);
+		irqstat &= sl811->irq_enable;
+	}
+
+#ifdef	QUIRK2
+	/* this may no longer be necessary ... */
+	if (irqstat == 0) {
+		irqstat = checkdone(sl811);
+		if (irqstat)
+			sl811->stat_lost++;
+	}
+#endif
+
+	/* USB packets, not necessarily handled in the order they're
+	 * issued ... that's fine if they're different endpoints.
+	 */
+	if (irqstat & SL11H_INTMASK_DONE_A) {
+		done(sl811, sl811->active_a, SL811_EP_A(SL811_HOST_BUF));
+		sl811->active_a = NULL;
+		sl811->stat_a++;
+	}
+#ifdef USE_B
+	if (irqstat & SL11H_INTMASK_DONE_B) {
+		done(sl811, sl811->active_b, SL811_EP_B(SL811_HOST_BUF));
+		sl811->active_b = NULL;
+		sl811->stat_b++;
+	}
+#endif
+	if (irqstat & SL11H_INTMASK_SOFINTR) {
+		unsigned index;
+
+		index = sl811->frame++ % (PERIODIC_SIZE - 1);
+		sl811->stat_sof++;
+
+		/* be graceful about almost-inevitable periodic schedule
+		 * overruns:  continue the previous frame's transfers iff
+		 * this one has nothing scheduled.
+		 */
+		if (sl811->next_periodic) {
+			// dev_err(hcd->self.controller, "overrun to slot %d\n", index);
+			sl811->stat_overrun++;
+		}
+		if (sl811->periodic[index])
+			sl811->next_periodic = sl811->periodic[index];
+	}
+
+	/* hub_wq manages debouncing and wakeup */
+	if (irqstat & SL11H_INTMASK_INSRMV) {
+		sl811->stat_insrmv++;
+
+		/* most stats are reset for each VBUS session */
+		sl811->stat_wake = 0;
+		sl811->stat_sof = 0;
+		sl811->stat_a = 0;
+		sl811->stat_b = 0;
+		sl811->stat_lost = 0;
+
+		sl811->ctrl1 = 0;
+		sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
+
+		sl811->irq_enable = SL11H_INTMASK_INSRMV;
+		sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable);
+
+		/* usbcore nukes other pending transactions on disconnect */
+		if (sl811->active_a) {
+			sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG), 0);
+			finish_request(sl811, sl811->active_a,
+				container_of(sl811->active_a
+						->hep->urb_list.next,
+					struct urb, urb_list),
+				-ESHUTDOWN);
+			sl811->active_a = NULL;
+		}
+#ifdef	USE_B
+		if (sl811->active_b) {
+			sl811_write(sl811, SL811_EP_B(SL11H_HOSTCTLREG), 0);
+			finish_request(sl811, sl811->active_b,
+				container_of(sl811->active_b
+						->hep->urb_list.next,
+					struct urb, urb_list),
+				NULL, -ESHUTDOWN);
+			sl811->active_b = NULL;
+		}
+#endif
+
+		/* port status seems weird until after reset, so
+		 * force the reset and make hub_wq clean up later.
+		 */
+		if (irqstat & SL11H_INTMASK_RD)
+			sl811->port1 &= ~USB_PORT_STAT_CONNECTION;
+		else
+			sl811->port1 |= USB_PORT_STAT_CONNECTION;
+
+		sl811->port1 |= USB_PORT_STAT_C_CONNECTION << 16;
+
+	} else if (irqstat & SL11H_INTMASK_RD) {
+		if (sl811->port1 & USB_PORT_STAT_SUSPEND) {
+			dev_dbg(hcd->self.controller, "wakeup\n");
+			sl811->port1 |= USB_PORT_STAT_C_SUSPEND << 16;
+			sl811->stat_wake++;
+		} else
+			irqstat &= ~SL11H_INTMASK_RD;
+	}
+
+	if (irqstat) {
+		if (sl811->port1 & USB_PORT_STAT_ENABLE)
+			start_transfer(sl811);
+		ret = IRQ_HANDLED;
+		if (retries--)
+			goto retry;
+	}
+
+	if (sl811->periodic_count == 0 && list_empty(&sl811->async))
+		sofirq_off(sl811);
+	sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable);
+
+	spin_unlock(&sl811->lock);
+
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* usb 1.1 says max 90% of a frame is available for periodic transfers.
+ * this driver doesn't promise that much since it's got to handle an
+ * IRQ per packet; irq handling latencies also use up that time.
+ *
+ * NOTE:  the periodic schedule is a sparse tree, with the load for
+ * each branch minimized.  see fig 3.5 in the OHCI spec for example.
+ */
+#define	MAX_PERIODIC_LOAD	500	/* out of 1000 usec */
+
+static int balance(struct sl811 *sl811, u16 period, u16 load)
+{
+	int	i, branch = -ENOSPC;
+
+	/* search for the least loaded schedule branch of that period
+	 * which has enough bandwidth left unreserved.
+	 */
+	for (i = 0; i < period ; i++) {
+		if (branch < 0 || sl811->load[branch] > sl811->load[i]) {
+			int	j;
+
+			for (j = i; j < PERIODIC_SIZE; j += period) {
+				if ((sl811->load[j] + load)
+						> MAX_PERIODIC_LOAD)
+					break;
+			}
+			if (j < PERIODIC_SIZE)
+				continue;
+			branch = i;
+		}
+	}
+	return branch;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int sl811h_urb_enqueue(
+	struct usb_hcd		*hcd,
+	struct urb		*urb,
+	gfp_t			mem_flags
+) {
+	struct sl811		*sl811 = hcd_to_sl811(hcd);
+	struct usb_device	*udev = urb->dev;
+	unsigned int		pipe = urb->pipe;
+	int			is_out = !usb_pipein(pipe);
+	int			type = usb_pipetype(pipe);
+	int			epnum = usb_pipeendpoint(pipe);
+	struct sl811h_ep	*ep = NULL;
+	unsigned long		flags;
+	int			i;
+	int			retval;
+	struct usb_host_endpoint	*hep = urb->ep;
+
+#ifndef CONFIG_USB_SL811_HCD_ISO
+	if (type == PIPE_ISOCHRONOUS)
+		return -ENOSPC;
+#endif
+
+	/* avoid all allocations within spinlocks */
+	if (!hep->hcpriv) {
+		ep = kzalloc(sizeof *ep, mem_flags);
+		if (ep == NULL)
+			return -ENOMEM;
+	}
+
+	spin_lock_irqsave(&sl811->lock, flags);
+
+	/* don't submit to a dead or disabled port */
+	if (!(sl811->port1 & USB_PORT_STAT_ENABLE)
+			|| !HC_IS_RUNNING(hcd->state)) {
+		retval = -ENODEV;
+		kfree(ep);
+		goto fail_not_linked;
+	}
+	retval = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (retval) {
+		kfree(ep);
+		goto fail_not_linked;
+	}
+
+	if (hep->hcpriv) {
+		kfree(ep);
+		ep = hep->hcpriv;
+	} else if (!ep) {
+		retval = -ENOMEM;
+		goto fail;
+
+	} else {
+		INIT_LIST_HEAD(&ep->schedule);
+		ep->udev = udev;
+		ep->epnum = epnum;
+		ep->maxpacket = usb_maxpacket(udev, urb->pipe);
+		ep->defctrl = SL11H_HCTLMASK_ARM | SL11H_HCTLMASK_ENABLE;
+		usb_settoggle(udev, epnum, is_out, 0);
+
+		if (type == PIPE_CONTROL)
+			ep->nextpid = USB_PID_SETUP;
+		else if (is_out)
+			ep->nextpid = USB_PID_OUT;
+		else
+			ep->nextpid = USB_PID_IN;
+
+		if (ep->maxpacket > H_MAXPACKET) {
+			/* iso packets up to 240 bytes could work... */
+			dev_dbg(hcd->self.controller,
+				"dev %d ep%d maxpacket %d\n", udev->devnum,
+				epnum, ep->maxpacket);
+			retval = -EINVAL;
+			kfree(ep);
+			goto fail;
+		}
+
+		if (udev->speed == USB_SPEED_LOW) {
+			/* send preamble for external hub? */
+			if (!(sl811->ctrl1 & SL11H_CTL1MASK_LSPD))
+				ep->defctrl |= SL11H_HCTLMASK_PREAMBLE;
+		}
+		switch (type) {
+		case PIPE_ISOCHRONOUS:
+		case PIPE_INTERRUPT:
+			if (urb->interval > PERIODIC_SIZE)
+				urb->interval = PERIODIC_SIZE;
+			ep->period = urb->interval;
+			ep->branch = PERIODIC_SIZE;
+			if (type == PIPE_ISOCHRONOUS)
+				ep->defctrl |= SL11H_HCTLMASK_ISOCH;
+			ep->load = usb_calc_bus_time(udev->speed, !is_out,
+						     type == PIPE_ISOCHRONOUS,
+						     usb_maxpacket(udev, pipe))
+					/ 1000;
+			break;
+		}
+
+		ep->hep = hep;
+		hep->hcpriv = ep;
+	}
+
+	/* maybe put endpoint into schedule */
+	switch (type) {
+	case PIPE_CONTROL:
+	case PIPE_BULK:
+		if (list_empty(&ep->schedule))
+			list_add_tail(&ep->schedule, &sl811->async);
+		break;
+	case PIPE_ISOCHRONOUS:
+	case PIPE_INTERRUPT:
+		urb->interval = ep->period;
+		if (ep->branch < PERIODIC_SIZE) {
+			/* NOTE:  the phase is correct here, but the value
+			 * needs offsetting by the transfer queue depth.
+			 * All current drivers ignore start_frame, so this
+			 * is unlikely to ever matter...
+			 */
+			urb->start_frame = (sl811->frame & (PERIODIC_SIZE - 1))
+						+ ep->branch;
+			break;
+		}
+
+		retval = balance(sl811, ep->period, ep->load);
+		if (retval < 0)
+			goto fail;
+		ep->branch = retval;
+		retval = 0;
+		urb->start_frame = (sl811->frame & (PERIODIC_SIZE - 1))
+					+ ep->branch;
+
+		/* sort each schedule branch by period (slow before fast)
+		 * to share the faster parts of the tree without needing
+		 * dummy/placeholder nodes
+		 */
+		dev_dbg(hcd->self.controller, "schedule qh%d/%p branch %d\n",
+			ep->period, ep, ep->branch);
+		for (i = ep->branch; i < PERIODIC_SIZE; i += ep->period) {
+			struct sl811h_ep	**prev = &sl811->periodic[i];
+			struct sl811h_ep	*here = *prev;
+
+			while (here && ep != here) {
+				if (ep->period > here->period)
+					break;
+				prev = &here->next;
+				here = *prev;
+			}
+			if (ep != here) {
+				ep->next = here;
+				*prev = ep;
+			}
+			sl811->load[i] += ep->load;
+		}
+		sl811->periodic_count++;
+		hcd->self.bandwidth_allocated += ep->load / ep->period;
+		sofirq_on(sl811);
+	}
+
+	urb->hcpriv = hep;
+	start_transfer(sl811);
+	sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable);
+fail:
+	if (retval)
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+fail_not_linked:
+	spin_unlock_irqrestore(&sl811->lock, flags);
+	return retval;
+}
+
+static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct sl811		*sl811 = hcd_to_sl811(hcd);
+	struct usb_host_endpoint *hep;
+	unsigned long		flags;
+	struct sl811h_ep	*ep;
+	int			retval;
+
+	spin_lock_irqsave(&sl811->lock, flags);
+	retval = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (retval)
+		goto fail;
+
+	hep = urb->hcpriv;
+	ep = hep->hcpriv;
+	if (ep) {
+		/* finish right away if this urb can't be active ...
+		 * note that some drivers wrongly expect delays
+		 */
+		if (ep->hep->urb_list.next != &urb->urb_list) {
+			/* not front of queue?  never active */
+
+		/* for active transfers, we expect an IRQ */
+		} else if (sl811->active_a == ep) {
+			if (time_before_eq(sl811->jiffies_a, jiffies)) {
+				/* happens a lot with lowspeed?? */
+				dev_dbg(hcd->self.controller,
+					"giveup on DONE_A: ctrl %02x sts %02x\n",
+					sl811_read(sl811,
+						SL811_EP_A(SL11H_HOSTCTLREG)),
+					sl811_read(sl811,
+						SL811_EP_A(SL11H_PKTSTATREG)));
+				sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG),
+						0);
+				sl811->active_a = NULL;
+			} else
+				urb = NULL;
+#ifdef	USE_B
+		} else if (sl811->active_b == ep) {
+			if (time_before_eq(sl811->jiffies_a, jiffies)) {
+				/* happens a lot with lowspeed?? */
+				dev_dbg(hcd->self.controller,
+					"giveup on DONE_B: ctrl %02x sts %02x\n",
+					sl811_read(sl811,
+						SL811_EP_B(SL11H_HOSTCTLREG)),
+					sl811_read(sl811,
+						SL811_EP_B(SL11H_PKTSTATREG)));
+				sl811_write(sl811, SL811_EP_B(SL11H_HOSTCTLREG),
+						0);
+				sl811->active_b = NULL;
+			} else
+				urb = NULL;
+#endif
+		} else {
+			/* front of queue for inactive endpoint */
+		}
+
+		if (urb)
+			finish_request(sl811, ep, urb, 0);
+		else
+			dev_dbg(sl811_to_hcd(sl811)->self.controller,
+				"dequeue, urb %p active %s; wait4irq\n", urb,
+				(sl811->active_a == ep) ? "A" : "B");
+	} else
+		retval = -EINVAL;
+ fail:
+	spin_unlock_irqrestore(&sl811->lock, flags);
+	return retval;
+}
+
+static void
+sl811h_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
+{
+	struct sl811h_ep	*ep = hep->hcpriv;
+
+	if (!ep)
+		return;
+
+	/* assume we'd just wait for the irq */
+	if (!list_empty(&hep->urb_list))
+		msleep(3);
+	if (!list_empty(&hep->urb_list))
+		dev_warn(hcd->self.controller, "ep %p not empty?\n", ep);
+
+	kfree(ep);
+	hep->hcpriv = NULL;
+}
+
+static int
+sl811h_get_frame(struct usb_hcd *hcd)
+{
+	struct sl811 *sl811 = hcd_to_sl811(hcd);
+
+	/* wrong except while periodic transfers are scheduled;
+	 * never matches the on-the-wire frame;
+	 * subject to overruns.
+	 */
+	return sl811->frame;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* the virtual root hub timer IRQ checks for hub status */
+static int
+sl811h_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct sl811 *sl811 = hcd_to_sl811(hcd);
+#ifdef	QUIRK3
+	unsigned long flags;
+
+	/* non-SMP HACK: use root hub timer as i/o watchdog
+	 * this seems essential when SOF IRQs aren't in use...
+	 */
+	local_irq_save(flags);
+	if (!timer_pending(&sl811->timer)) {
+		if (sl811h_irq( /* ~0, */ hcd) != IRQ_NONE)
+			sl811->stat_lost++;
+	}
+	local_irq_restore(flags);
+#endif
+
+	if (!(sl811->port1 & (0xffff << 16)))
+		return 0;
+
+	/* tell hub_wq port 1 changed */
+	*buf = (1 << 1);
+	return 1;
+}
+
+static void
+sl811h_hub_descriptor (
+	struct sl811			*sl811,
+	struct usb_hub_descriptor	*desc
+) {
+	u16		temp = 0;
+
+	desc->bDescriptorType = USB_DT_HUB;
+	desc->bHubContrCurrent = 0;
+
+	desc->bNbrPorts = 1;
+	desc->bDescLength = 9;
+
+	/* per-port power switching (gang of one!), or none */
+	desc->bPwrOn2PwrGood = 0;
+	if (sl811->board && sl811->board->port_power) {
+		desc->bPwrOn2PwrGood = sl811->board->potpg;
+		if (!desc->bPwrOn2PwrGood)
+			desc->bPwrOn2PwrGood = 10;
+		temp = HUB_CHAR_INDV_PORT_LPSM;
+	} else
+		temp = HUB_CHAR_NO_LPSM;
+
+	/* no overcurrent errors detection/handling */
+	temp |= HUB_CHAR_NO_OCPM;
+
+	desc->wHubCharacteristics = cpu_to_le16(temp);
+
+	/* ports removable, and legacy PortPwrCtrlMask */
+	desc->u.hs.DeviceRemovable[0] = 0 << 1;
+	desc->u.hs.DeviceRemovable[1] = ~0;
+}
+
+static void
+sl811h_timer(struct timer_list *t)
+{
+	struct sl811 	*sl811 = from_timer(sl811, t, timer);
+	unsigned long	flags;
+	u8		irqstat;
+	u8		signaling = sl811->ctrl1 & SL11H_CTL1MASK_FORCE;
+	const u32	mask = USB_PORT_STAT_CONNECTION
+				| USB_PORT_STAT_ENABLE
+				| USB_PORT_STAT_LOW_SPEED;
+
+	spin_lock_irqsave(&sl811->lock, flags);
+
+	/* stop special signaling */
+	sl811->ctrl1 &= ~SL11H_CTL1MASK_FORCE;
+	sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
+	udelay(3);
+
+	irqstat = sl811_read(sl811, SL11H_IRQ_STATUS);
+
+	switch (signaling) {
+	case SL11H_CTL1MASK_SE0:
+		dev_dbg(sl811_to_hcd(sl811)->self.controller, "end reset\n");
+		sl811->port1 = (USB_PORT_STAT_C_RESET << 16)
+				 | USB_PORT_STAT_POWER;
+		sl811->ctrl1 = 0;
+		/* don't wrongly ack RD */
+		if (irqstat & SL11H_INTMASK_INSRMV)
+			irqstat &= ~SL11H_INTMASK_RD;
+		break;
+	case SL11H_CTL1MASK_K:
+		dev_dbg(sl811_to_hcd(sl811)->self.controller, "end resume\n");
+		sl811->port1 &= ~USB_PORT_STAT_SUSPEND;
+		break;
+	default:
+		dev_dbg(sl811_to_hcd(sl811)->self.controller,
+			"odd timer signaling: %02x\n", signaling);
+		break;
+	}
+	sl811_write(sl811, SL11H_IRQ_STATUS, irqstat);
+
+	if (irqstat & SL11H_INTMASK_RD) {
+		/* usbcore nukes all pending transactions on disconnect */
+		if (sl811->port1 & USB_PORT_STAT_CONNECTION)
+			sl811->port1 |= (USB_PORT_STAT_C_CONNECTION << 16)
+					| (USB_PORT_STAT_C_ENABLE << 16);
+		sl811->port1 &= ~mask;
+		sl811->irq_enable = SL11H_INTMASK_INSRMV;
+	} else {
+		sl811->port1 |= mask;
+		if (irqstat & SL11H_INTMASK_DP)
+			sl811->port1 &= ~USB_PORT_STAT_LOW_SPEED;
+		sl811->irq_enable = SL11H_INTMASK_INSRMV | SL11H_INTMASK_RD;
+	}
+
+	if (sl811->port1 & USB_PORT_STAT_CONNECTION) {
+		u8	ctrl2 = SL811HS_CTL2_INIT;
+
+		sl811->irq_enable |= SL11H_INTMASK_DONE_A;
+#ifdef USE_B
+		sl811->irq_enable |= SL11H_INTMASK_DONE_B;
+#endif
+		if (sl811->port1 & USB_PORT_STAT_LOW_SPEED) {
+			sl811->ctrl1 |= SL11H_CTL1MASK_LSPD;
+			ctrl2 |= SL811HS_CTL2MASK_DSWAP;
+		}
+
+		/* start SOFs flowing, kickstarting with A registers */
+		sl811->ctrl1 |= SL11H_CTL1MASK_SOF_ENA;
+		sl811_write(sl811, SL11H_SOFLOWREG, 0xe0);
+		sl811_write(sl811, SL811HS_CTLREG2, ctrl2);
+
+		/* autoincrementing */
+		sl811_write(sl811, SL811_EP_A(SL11H_BUFLNTHREG), 0);
+		writeb(SL_SOF, sl811->data_reg);
+		writeb(0, sl811->data_reg);
+		sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG),
+				SL11H_HCTLMASK_ARM);
+
+		/* hub_wq provides debounce delay */
+	} else {
+		sl811->ctrl1 = 0;
+	}
+	sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
+
+	/* reenable irqs */
+	sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable);
+	spin_unlock_irqrestore(&sl811->lock, flags);
+}
+
+static int
+sl811h_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength
+) {
+	struct sl811	*sl811 = hcd_to_sl811(hcd);
+	int		retval = 0;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&sl811->lock, flags);
+
+	switch (typeReq) {
+	case ClearHubFeature:
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if (wIndex != 1 || wLength != 0)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			sl811->port1 &= USB_PORT_STAT_POWER;
+			sl811->ctrl1 = 0;
+			sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
+			sl811->irq_enable = SL11H_INTMASK_INSRMV;
+			sl811_write(sl811, SL11H_IRQ_ENABLE,
+						sl811->irq_enable);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			if (!(sl811->port1 & USB_PORT_STAT_SUSPEND))
+				break;
+
+			/* 20 msec of resume/K signaling, other irqs blocked */
+			dev_dbg(hcd->self.controller, "start resume...\n");
+			sl811->irq_enable = 0;
+			sl811_write(sl811, SL11H_IRQ_ENABLE,
+						sl811->irq_enable);
+			sl811->ctrl1 |= SL11H_CTL1MASK_K;
+			sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
+
+			mod_timer(&sl811->timer, jiffies
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT));
+			break;
+		case USB_PORT_FEAT_POWER:
+			port_power(sl811, 0);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_SUSPEND:
+		case USB_PORT_FEAT_C_CONNECTION:
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+		case USB_PORT_FEAT_C_RESET:
+			break;
+		default:
+			goto error;
+		}
+		sl811->port1 &= ~(1 << wValue);
+		break;
+	case GetHubDescriptor:
+		sl811h_hub_descriptor(sl811, (struct usb_hub_descriptor *) buf);
+		break;
+	case GetHubStatus:
+		put_unaligned_le32(0, buf);
+		break;
+	case GetPortStatus:
+		if (wIndex != 1)
+			goto error;
+		put_unaligned_le32(sl811->port1, buf);
+
+		if (__is_defined(VERBOSE) ||
+		    *(u16*)(buf+2)) /* only if wPortChange is interesting */
+			dev_dbg(hcd->self.controller, "GetPortStatus %08x\n",
+				sl811->port1);
+		break;
+	case SetPortFeature:
+		if (wIndex != 1 || wLength != 0)
+			goto error;
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			if (sl811->port1 & USB_PORT_STAT_RESET)
+				goto error;
+			if (!(sl811->port1 & USB_PORT_STAT_ENABLE))
+				goto error;
+
+			dev_dbg(hcd->self.controller,"suspend...\n");
+			sl811->ctrl1 &= ~SL11H_CTL1MASK_SOF_ENA;
+			sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
+			break;
+		case USB_PORT_FEAT_POWER:
+			port_power(sl811, 1);
+			break;
+		case USB_PORT_FEAT_RESET:
+			if (sl811->port1 & USB_PORT_STAT_SUSPEND)
+				goto error;
+			if (!(sl811->port1 & USB_PORT_STAT_POWER))
+				break;
+
+			/* 50 msec of reset/SE0 signaling, irqs blocked */
+			sl811->irq_enable = 0;
+			sl811_write(sl811, SL11H_IRQ_ENABLE,
+						sl811->irq_enable);
+			sl811->ctrl1 = SL11H_CTL1MASK_SE0;
+			sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
+			sl811->port1 |= USB_PORT_STAT_RESET;
+			mod_timer(&sl811->timer, jiffies
+					+ msecs_to_jiffies(50));
+			break;
+		default:
+			goto error;
+		}
+		sl811->port1 |= 1 << wValue;
+		break;
+
+	default:
+error:
+		/* "protocol stall" on error */
+		retval = -EPIPE;
+	}
+
+	spin_unlock_irqrestore(&sl811->lock, flags);
+	return retval;
+}
+
+#ifdef	CONFIG_PM
+
+static int
+sl811h_bus_suspend(struct usb_hcd *hcd)
+{
+	// SOFs off
+	dev_dbg(hcd->self.controller, "%s\n", __func__);
+	return 0;
+}
+
+static int
+sl811h_bus_resume(struct usb_hcd *hcd)
+{
+	// SOFs on
+	dev_dbg(hcd->self.controller, "%s\n", __func__);
+	return 0;
+}
+
+#else
+
+#define	sl811h_bus_suspend	NULL
+#define	sl811h_bus_resume	NULL
+
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+static void dump_irq(struct seq_file *s, char *label, u8 mask)
+{
+	seq_printf(s, "%s %02x%s%s%s%s%s%s\n", label, mask,
+		(mask & SL11H_INTMASK_DONE_A) ? " done_a" : "",
+		(mask & SL11H_INTMASK_DONE_B) ? " done_b" : "",
+		(mask & SL11H_INTMASK_SOFINTR) ? " sof" : "",
+		(mask & SL11H_INTMASK_INSRMV) ? " ins/rmv" : "",
+		(mask & SL11H_INTMASK_RD) ? " rd" : "",
+		(mask & SL11H_INTMASK_DP) ? " dp" : "");
+}
+
+static int sl811h_debug_show(struct seq_file *s, void *unused)
+{
+	struct sl811		*sl811 = s->private;
+	struct sl811h_ep	*ep;
+	unsigned		i;
+
+	seq_printf(s, "%s\n%s version %s\nportstatus[1] = %08x\n",
+		sl811_to_hcd(sl811)->product_desc,
+		hcd_name, DRIVER_VERSION,
+		sl811->port1);
+
+	seq_printf(s, "insert/remove: %ld\n", sl811->stat_insrmv);
+	seq_printf(s, "current session:  done_a %ld done_b %ld "
+			"wake %ld sof %ld overrun %ld lost %ld\n\n",
+		sl811->stat_a, sl811->stat_b,
+		sl811->stat_wake, sl811->stat_sof,
+		sl811->stat_overrun, sl811->stat_lost);
+
+	spin_lock_irq(&sl811->lock);
+
+	if (sl811->ctrl1 & SL11H_CTL1MASK_SUSPEND)
+		seq_printf(s, "(suspended)\n\n");
+	else {
+		u8	t = sl811_read(sl811, SL11H_CTLREG1);
+
+		seq_printf(s, "ctrl1 %02x%s%s%s%s\n", t,
+			(t & SL11H_CTL1MASK_SOF_ENA) ? " sofgen" : "",
+			({char *s; switch (t & SL11H_CTL1MASK_FORCE) {
+			case SL11H_CTL1MASK_NORMAL: s = ""; break;
+			case SL11H_CTL1MASK_SE0: s = " se0/reset"; break;
+			case SL11H_CTL1MASK_K: s = " k/resume"; break;
+			default: s = "j"; break;
+			} s; }),
+			(t & SL11H_CTL1MASK_LSPD) ? " lowspeed" : "",
+			(t & SL11H_CTL1MASK_SUSPEND) ? " suspend" : "");
+
+		dump_irq(s, "irq_enable",
+				sl811_read(sl811, SL11H_IRQ_ENABLE));
+		dump_irq(s, "irq_status",
+				sl811_read(sl811, SL11H_IRQ_STATUS));
+		seq_printf(s, "frame clocks remaining:  %d\n",
+				sl811_read(sl811, SL11H_SOFTMRREG) << 6);
+	}
+
+	seq_printf(s, "A: qh%p ctl %02x sts %02x\n", sl811->active_a,
+		sl811_read(sl811, SL811_EP_A(SL11H_HOSTCTLREG)),
+		sl811_read(sl811, SL811_EP_A(SL11H_PKTSTATREG)));
+	seq_printf(s, "B: qh%p ctl %02x sts %02x\n", sl811->active_b,
+		sl811_read(sl811, SL811_EP_B(SL11H_HOSTCTLREG)),
+		sl811_read(sl811, SL811_EP_B(SL11H_PKTSTATREG)));
+	seq_printf(s, "\n");
+	list_for_each_entry (ep, &sl811->async, schedule) {
+		struct urb		*urb;
+
+		seq_printf(s, "%s%sqh%p, ep%d%s, maxpacket %d"
+					" nak %d err %d\n",
+			(ep == sl811->active_a) ? "(A) " : "",
+			(ep == sl811->active_b) ? "(B) " : "",
+			ep, ep->epnum,
+			({ char *s; switch (ep->nextpid) {
+			case USB_PID_IN: s = "in"; break;
+			case USB_PID_OUT: s = "out"; break;
+			case USB_PID_SETUP: s = "setup"; break;
+			case USB_PID_ACK: s = "status"; break;
+			default: s = "?"; break;
+			} s;}),
+			ep->maxpacket,
+			ep->nak_count, ep->error_count);
+		list_for_each_entry (urb, &ep->hep->urb_list, urb_list) {
+			seq_printf(s, "  urb%p, %d/%d\n", urb,
+				urb->actual_length,
+				urb->transfer_buffer_length);
+		}
+	}
+	if (!list_empty(&sl811->async))
+		seq_printf(s, "\n");
+
+	seq_printf(s, "periodic size= %d\n", PERIODIC_SIZE);
+
+	for (i = 0; i < PERIODIC_SIZE; i++) {
+		ep = sl811->periodic[i];
+		if (!ep)
+			continue;
+		seq_printf(s, "%2d [%3d]:\n", i, sl811->load[i]);
+
+		/* DUMB: prints shared entries multiple times */
+		do {
+			seq_printf(s,
+				"   %s%sqh%d/%p (%sdev%d ep%d%s max %d) "
+					"err %d\n",
+				(ep == sl811->active_a) ? "(A) " : "",
+				(ep == sl811->active_b) ? "(B) " : "",
+				ep->period, ep,
+				(ep->udev->speed == USB_SPEED_FULL)
+					? "" : "ls ",
+				ep->udev->devnum, ep->epnum,
+				(ep->epnum == 0) ? ""
+					: ((ep->nextpid == USB_PID_IN)
+						? "in"
+						: "out"),
+				ep->maxpacket, ep->error_count);
+			ep = ep->next;
+		} while (ep);
+	}
+
+	spin_unlock_irq(&sl811->lock);
+	seq_printf(s, "\n");
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(sl811h_debug);
+
+/* expect just one sl811 per system */
+static void create_debug_file(struct sl811 *sl811)
+{
+	debugfs_create_file("sl811h", S_IRUGO, usb_debug_root, sl811,
+			    &sl811h_debug_fops);
+}
+
+static void remove_debug_file(struct sl811 *sl811)
+{
+	debugfs_lookup_and_remove("sl811h", usb_debug_root);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void
+sl811h_stop(struct usb_hcd *hcd)
+{
+	struct sl811	*sl811 = hcd_to_sl811(hcd);
+	unsigned long	flags;
+
+	del_timer_sync(&hcd->rh_timer);
+
+	spin_lock_irqsave(&sl811->lock, flags);
+	port_power(sl811, 0);
+	spin_unlock_irqrestore(&sl811->lock, flags);
+}
+
+static int
+sl811h_start(struct usb_hcd *hcd)
+{
+	struct sl811		*sl811 = hcd_to_sl811(hcd);
+
+	/* chip has been reset, VBUS power is off */
+	hcd->state = HC_STATE_RUNNING;
+
+	if (sl811->board) {
+		if (!device_can_wakeup(hcd->self.controller))
+			device_init_wakeup(hcd->self.controller,
+				sl811->board->can_wakeup);
+		hcd->power_budget = sl811->board->power * 2;
+	}
+
+	/* enable power and interrupts */
+	port_power(sl811, 1);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct hc_driver sl811h_hc_driver = {
+	.description =		hcd_name,
+	.hcd_priv_size =	sizeof(struct sl811),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			sl811h_irq,
+	.flags =		HCD_USB11 | HCD_MEMORY,
+
+	/* Basic lifecycle operations */
+	.start =		sl811h_start,
+	.stop =			sl811h_stop,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		sl811h_urb_enqueue,
+	.urb_dequeue =		sl811h_urb_dequeue,
+	.endpoint_disable =	sl811h_endpoint_disable,
+
+	/*
+	 * periodic schedule support
+	 */
+	.get_frame_number =	sl811h_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	sl811h_hub_status_data,
+	.hub_control =		sl811h_hub_control,
+	.bus_suspend =		sl811h_bus_suspend,
+	.bus_resume =		sl811h_bus_resume,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int
+sl811h_remove(struct platform_device *dev)
+{
+	struct usb_hcd		*hcd = platform_get_drvdata(dev);
+	struct sl811		*sl811 = hcd_to_sl811(hcd);
+	struct resource		*res;
+
+	remove_debug_file(sl811);
+	usb_remove_hcd(hcd);
+
+	/* some platforms may use IORESOURCE_IO */
+	res = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	if (res)
+		iounmap(sl811->data_reg);
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (res)
+		iounmap(sl811->addr_reg);
+
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+static int
+sl811h_probe(struct platform_device *dev)
+{
+	struct usb_hcd		*hcd;
+	struct sl811		*sl811;
+	struct resource		*addr, *data, *ires;
+	int			irq;
+	void __iomem		*addr_reg;
+	void __iomem		*data_reg;
+	int			retval;
+	u8			tmp, ioaddr;
+	unsigned long		irqflags;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	/* the chip may be wired for either kind of addressing */
+	addr = platform_get_mem_or_io(dev, 0);
+	data = platform_get_mem_or_io(dev, 1);
+	if (!addr || !data || resource_type(addr) != resource_type(data))
+		return -ENODEV;
+
+	/* basic sanity checks first.  board-specific init logic should
+	 * have initialized these three resources and probably board
+	 * specific platform_data.  we don't probe for IRQs, and do only
+	 * minimal sanity checking.
+	 */
+	ires = platform_get_resource(dev, IORESOURCE_IRQ, 0);
+	if (dev->num_resources < 3 || !ires)
+		return -ENODEV;
+
+	irq = ires->start;
+	irqflags = ires->flags & IRQF_TRIGGER_MASK;
+
+	ioaddr = resource_type(addr) == IORESOURCE_IO;
+	if (ioaddr) {
+		/*
+		 * NOTE: 64-bit resource->start is getting truncated
+		 * to avoid compiler warning, assuming that ->start
+		 * is always 32-bit for this case
+		 */
+		addr_reg = (void __iomem *) (unsigned long) addr->start;
+		data_reg = (void __iomem *) (unsigned long) data->start;
+	} else {
+		addr_reg = ioremap(addr->start, 1);
+		if (addr_reg == NULL) {
+			retval = -ENOMEM;
+			goto err2;
+		}
+
+		data_reg = ioremap(data->start, 1);
+		if (data_reg == NULL) {
+			retval = -ENOMEM;
+			goto err4;
+		}
+	}
+
+	/* allocate and initialize hcd */
+	hcd = usb_create_hcd(&sl811h_hc_driver, &dev->dev, dev_name(&dev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err5;
+	}
+	hcd->rsrc_start = addr->start;
+	sl811 = hcd_to_sl811(hcd);
+
+	spin_lock_init(&sl811->lock);
+	INIT_LIST_HEAD(&sl811->async);
+	sl811->board = dev_get_platdata(&dev->dev);
+	timer_setup(&sl811->timer, sl811h_timer, 0);
+	sl811->addr_reg = addr_reg;
+	sl811->data_reg = data_reg;
+
+	spin_lock_irq(&sl811->lock);
+	port_power(sl811, 0);
+	spin_unlock_irq(&sl811->lock);
+	msleep(200);
+
+	tmp = sl811_read(sl811, SL11H_HWREVREG);
+	switch (tmp >> 4) {
+	case 1:
+		hcd->product_desc = "SL811HS v1.2";
+		break;
+	case 2:
+		hcd->product_desc = "SL811HS v1.5";
+		break;
+	default:
+		/* reject case 0, SL11S is less functional */
+		dev_dbg(&dev->dev, "chiprev %02x\n", tmp);
+		retval = -ENXIO;
+		goto err6;
+	}
+
+	/* The chip's IRQ is level triggered, active high.  A requirement
+	 * for platform device setup is to cope with things like signal
+	 * inverters (e.g. CF is active low) or working only with edge
+	 * triggers (e.g. most ARM CPUs).  Initial driver stress testing
+	 * was on a system with single edge triggering, so most sorts of
+	 * triggering arrangement should work.
+	 *
+	 * Use resource IRQ flags if set by platform device setup.
+	 */
+	irqflags |= IRQF_SHARED;
+	retval = usb_add_hcd(hcd, irq, irqflags);
+	if (retval != 0)
+		goto err6;
+
+	device_wakeup_enable(hcd->self.controller);
+
+	create_debug_file(sl811);
+	return retval;
+
+ err6:
+	usb_put_hcd(hcd);
+ err5:
+	if (!ioaddr)
+		iounmap(data_reg);
+ err4:
+	if (!ioaddr)
+		iounmap(addr_reg);
+ err2:
+	dev_dbg(&dev->dev, "init error, %d\n", retval);
+	return retval;
+}
+
+#ifdef	CONFIG_PM
+
+/* for this device there's no useful distinction between the controller
+ * and its root hub.
+ */
+
+static int
+sl811h_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct usb_hcd	*hcd = platform_get_drvdata(dev);
+	struct sl811	*sl811 = hcd_to_sl811(hcd);
+	int		retval = 0;
+
+	switch (state.event) {
+	case PM_EVENT_FREEZE:
+		retval = sl811h_bus_suspend(hcd);
+		break;
+	case PM_EVENT_SUSPEND:
+	case PM_EVENT_HIBERNATE:
+	case PM_EVENT_PRETHAW:		/* explicitly discard hw state */
+		port_power(sl811, 0);
+		break;
+	}
+	return retval;
+}
+
+static int
+sl811h_resume(struct platform_device *dev)
+{
+	struct usb_hcd	*hcd = platform_get_drvdata(dev);
+	struct sl811	*sl811 = hcd_to_sl811(hcd);
+
+	/* with no "check to see if VBUS is still powered" board hook,
+	 * let's assume it'd only be powered to enable remote wakeup.
+	 */
+	if (!sl811->port1 || !device_can_wakeup(&hcd->self.root_hub->dev)) {
+		sl811->port1 = 0;
+		port_power(sl811, 1);
+		usb_root_hub_lost_power(hcd->self.root_hub);
+		return 0;
+	}
+
+	return sl811h_bus_resume(hcd);
+}
+
+#else
+
+#define	sl811h_suspend	NULL
+#define	sl811h_resume	NULL
+
+#endif
+
+
+/* this driver is exported so sl811_cs can depend on it */
+struct platform_driver sl811h_driver = {
+	.probe =	sl811h_probe,
+	.remove =	sl811h_remove,
+
+	.suspend =	sl811h_suspend,
+	.resume =	sl811h_resume,
+	.driver = {
+		.name =	hcd_name,
+	},
+};
+EXPORT_SYMBOL(sl811h_driver);
+
+module_platform_driver(sl811h_driver);
diff --git a/drivers/usb/host/sl811.h b/drivers/usb/host/sl811.h
new file mode 100644
index 000000000..ba8c9aa7d
--- /dev/null
+++ b/drivers/usb/host/sl811.h
@@ -0,0 +1,249 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * SL811HS register declarations and HCD data structures
+ *
+ * Copyright (C) 2004 Psion Teklogix
+ * Copyright (C) 2004 David Brownell
+ * Copyright (C) 2001 Cypress Semiconductor Inc. 
+ */
+
+/*
+ * SL811HS has transfer registers, and control registers.  In host/master
+ * mode one set of registers is used; in peripheral/slave mode, another.
+ *  - SL11H only has some "A" transfer registers from 0x00-0x04
+ *  - SL811HS also has "B" registers from 0x08-0x0c
+ *  - SL811S (or HS in slave mode) has four A+B sets, at 00, 10, 20, 30
+ */
+
+#define SL811_EP_A(base)	((base) + 0)
+#define SL811_EP_B(base)	((base) + 8)
+
+#define SL811_HOST_BUF		0x00
+#define SL811_PERIPH_EP0	0x00
+#define SL811_PERIPH_EP1	0x10
+#define SL811_PERIPH_EP2	0x20
+#define SL811_PERIPH_EP3	0x30
+
+
+/* TRANSFER REGISTERS:  host and peripheral sides are similar
+ * except for the control models (master vs slave).
+ */
+#define SL11H_HOSTCTLREG	0
+#	define SL11H_HCTLMASK_ARM	0x01
+#	define SL11H_HCTLMASK_ENABLE	0x02
+#	define SL11H_HCTLMASK_IN	0x00
+#	define SL11H_HCTLMASK_OUT	0x04
+#	define SL11H_HCTLMASK_ISOCH	0x10
+#	define SL11H_HCTLMASK_AFTERSOF	0x20
+#	define SL11H_HCTLMASK_TOGGLE	0x40
+#	define SL11H_HCTLMASK_PREAMBLE	0x80
+#define SL11H_BUFADDRREG	1
+#define SL11H_BUFLNTHREG	2
+#define SL11H_PKTSTATREG	3	/* read */
+#	define SL11H_STATMASK_ACK	0x01
+#	define SL11H_STATMASK_ERROR	0x02
+#	define SL11H_STATMASK_TMOUT	0x04
+#	define SL11H_STATMASK_SEQ	0x08
+#	define SL11H_STATMASK_SETUP	0x10
+#	define SL11H_STATMASK_OVF	0x20
+#	define SL11H_STATMASK_NAK	0x40
+#	define SL11H_STATMASK_STALL	0x80
+#define SL11H_PIDEPREG		3	/* write */
+#	define	SL_SETUP	0xd0
+#	define	SL_IN		0x90
+#	define	SL_OUT		0x10
+#	define	SL_SOF		0x50
+#	define	SL_PREAMBLE	0xc0
+#	define	SL_NAK		0xa0
+#	define	SL_STALL	0xe0
+#	define	SL_DATA0	0x30
+#	define	SL_DATA1	0xb0
+#define SL11H_XFERCNTREG	4	/* read */
+#define SL11H_DEVADDRREG	4	/* write */
+
+
+/* CONTROL REGISTERS:  host and peripheral are very different.
+ */
+#define SL11H_CTLREG1		5
+#	define SL11H_CTL1MASK_SOF_ENA	0x01
+#	define SL11H_CTL1MASK_FORCE	0x18
+#		define SL11H_CTL1MASK_NORMAL	0x00
+#		define SL11H_CTL1MASK_SE0	0x08	/* reset */
+#		define SL11H_CTL1MASK_J		0x10
+#		define SL11H_CTL1MASK_K		0x18	/* resume */
+#	define SL11H_CTL1MASK_LSPD	0x20
+#	define SL11H_CTL1MASK_SUSPEND	0x40
+#define SL11H_IRQ_ENABLE	6
+#	define SL11H_INTMASK_DONE_A	0x01
+#	define SL11H_INTMASK_DONE_B	0x02
+#	define SL11H_INTMASK_SOFINTR	0x10
+#	define SL11H_INTMASK_INSRMV	0x20	/* to/from SE0 */
+#	define SL11H_INTMASK_RD		0x40
+#	define SL11H_INTMASK_DP		0x80	/* only in INTSTATREG */
+#define SL11S_ADDRESS		7
+
+/* 0x08-0x0c are for the B buffer (not in SL11) */
+
+#define SL11H_IRQ_STATUS	0x0D	/* write to ack */
+#define SL11H_HWREVREG		0x0E	/* read */
+#	define SL11H_HWRMASK_HWREV	0xF0
+#define SL11H_SOFLOWREG		0x0E	/* write */
+#define SL11H_SOFTMRREG		0x0F	/* read */
+
+/* a write to this register enables SL811HS features.
+ * HOST flag presumably overrides the chip input signal?
+ */
+#define SL811HS_CTLREG2		0x0F
+#	define SL811HS_CTL2MASK_SOF_MASK	0x3F
+#	define SL811HS_CTL2MASK_DSWAP		0x40
+#	define SL811HS_CTL2MASK_HOST		0x80
+
+#define SL811HS_CTL2_INIT	(SL811HS_CTL2MASK_HOST | 0x2e)
+
+
+/* DATA BUFFERS: registers from 0x10..0xff are for data buffers;
+ * that's 240 bytes, which we'll split evenly between A and B sides.
+ * Only ISO can use more than 64 bytes per packet.
+ * (The SL11S has 0x40..0xff for buffers.)
+ */
+#define H_MAXPACKET	120		/* bytes in A or B fifos */
+
+#define SL11H_DATA_START	0x10
+#define	SL811HS_PACKET_BUF(is_a)	((is_a) \
+		? SL11H_DATA_START \
+		: (SL11H_DATA_START + H_MAXPACKET))
+
+/*-------------------------------------------------------------------------*/
+
+#define	LOG2_PERIODIC_SIZE	5	/* arbitrary; this matches OHCI */
+#define	PERIODIC_SIZE		(1 << LOG2_PERIODIC_SIZE)
+
+struct sl811 {
+	spinlock_t		lock;
+	void __iomem		*addr_reg;
+	void __iomem		*data_reg;
+	struct sl811_platform_data	*board;
+
+	unsigned long		stat_insrmv;
+	unsigned long		stat_wake;
+	unsigned long		stat_sof;
+	unsigned long		stat_a;
+	unsigned long		stat_b;
+	unsigned long		stat_lost;
+	unsigned long		stat_overrun;
+
+	/* sw model */
+	struct timer_list	timer;
+	struct sl811h_ep	*next_periodic;
+	struct sl811h_ep	*next_async;
+
+	struct sl811h_ep	*active_a;
+	unsigned long		jiffies_a;
+	struct sl811h_ep	*active_b;
+	unsigned long		jiffies_b;
+
+	u32			port1;
+	u8			ctrl1, ctrl2, irq_enable;
+	u16			frame;
+
+	/* async schedule: control, bulk */
+	struct list_head	async;
+
+	/* periodic schedule: interrupt, iso */
+	u16			load[PERIODIC_SIZE];
+	struct sl811h_ep	*periodic[PERIODIC_SIZE];
+	unsigned		periodic_count;
+};
+
+static inline struct sl811 *hcd_to_sl811(struct usb_hcd *hcd)
+{
+	return (struct sl811 *) (hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *sl811_to_hcd(struct sl811 *sl811)
+{
+	return container_of((void *) sl811, struct usb_hcd, hcd_priv);
+}
+
+struct sl811h_ep {
+	struct usb_host_endpoint *hep;
+	struct usb_device	*udev;
+
+	u8			defctrl;
+	u8			maxpacket;
+	u8			epnum;
+	u8			nextpid;
+
+	u16			error_count;
+	u16			nak_count;
+	u16			length;		/* of current packet */
+
+	/* periodic schedule */
+	u16			period;
+	u16			branch;
+	u16			load;
+	struct sl811h_ep	*next;
+
+	/* async schedule */
+	struct list_head	schedule;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* These register utilities should work for the SL811S register API too
+ * NOTE:  caller must hold sl811->lock.
+ */
+
+static inline u8 sl811_read(struct sl811 *sl811, int reg)
+{
+	writeb(reg, sl811->addr_reg);
+	return readb(sl811->data_reg);
+}
+
+static inline void sl811_write(struct sl811 *sl811, int reg, u8 val)
+{
+	writeb(reg, sl811->addr_reg);
+	writeb(val, sl811->data_reg);
+}
+
+static inline void
+sl811_write_buf(struct sl811 *sl811, int addr, const void *buf, size_t count)
+{
+	const u8	*data;
+	void __iomem	*data_reg;
+
+	if (!count)
+		return;
+	writeb(addr, sl811->addr_reg);
+
+	data = buf;
+	data_reg = sl811->data_reg;
+	do {
+		writeb(*data++, data_reg);
+	} while (--count);
+}
+
+static inline void
+sl811_read_buf(struct sl811 *sl811, int addr, void *buf, size_t count)
+{
+	u8 		*data;
+	void __iomem	*data_reg;
+
+	if (!count)
+		return;
+	writeb(addr, sl811->addr_reg);
+
+	data = buf;
+	data_reg = sl811->data_reg;
+	do {
+		*data++ = readb(data_reg);
+	} while (--count);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef PACKET_TRACE
+#    define PACKET		pr_debug("sl811: "stuff)
+#else
+#    define PACKET(stuff...)	do{}while(0)
+#endif
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
new file mode 100644
index 000000000..16d157013
--- /dev/null
+++ b/drivers/usb/host/sl811_cs.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCMCIA driver for SL811HS (as found in REX-CFU1U)
+ * Filename: sl811_cs.c
+ * Author:   Yukio Yamamoto
+ *
+ *  Port to sl811-hcd and 2.6.x by
+ *    Botond Botyanszki <boti@rocketmail.com>
+ *    Simon Pickering
+ *
+ *  Last update: 2005-05-12
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+
+#include <linux/usb/sl811.h>
+
+MODULE_AUTHOR("Botond Botyanszki");
+MODULE_DESCRIPTION("REX-CFU1U PCMCIA driver for 2.6");
+MODULE_LICENSE("GPL");
+
+
+/*====================================================================*/
+/* MACROS                                                             */
+/*====================================================================*/
+
+#define INFO(args...) printk(KERN_INFO "sl811_cs: " args)
+
+/*====================================================================*/
+/* VARIABLES                                                          */
+/*====================================================================*/
+
+typedef struct local_info_t {
+	struct pcmcia_device	*p_dev;
+} local_info_t;
+
+static void sl811_cs_release(struct pcmcia_device * link);
+
+/*====================================================================*/
+
+static void release_platform_dev(struct device * dev)
+{
+	dev_dbg(dev, "sl811_cs platform_dev release\n");
+	dev->parent = NULL;
+}
+
+static struct sl811_platform_data platform_data = {
+	.potpg		= 100,
+	.power		= 50,		/* == 100mA */
+	// .reset	= ... FIXME:  invoke CF reset on the card
+};
+
+static struct resource resources[] = {
+	[0] = {
+		.flags	= IORESOURCE_IRQ,
+	},
+	[1] = {
+		// .name   = "address",
+		.flags	= IORESOURCE_IO,
+	},
+	[2] = {
+		// .name   = "data",
+		.flags	= IORESOURCE_IO,
+	},
+};
+
+extern struct platform_driver sl811h_driver;
+
+static struct platform_device platform_dev = {
+	.id			= -1,
+	.dev = {
+		.platform_data = &platform_data,
+		.release       = release_platform_dev,
+	},
+	.resource		= resources,
+	.num_resources		= ARRAY_SIZE(resources),
+};
+
+static int sl811_hc_init(struct device *parent, resource_size_t base_addr,
+			 int irq)
+{
+	if (platform_dev.dev.parent)
+		return -EBUSY;
+	platform_dev.dev.parent = parent;
+
+	/* finish setting up the platform device */
+	resources[0].start = irq;
+
+	resources[1].start = base_addr;
+	resources[1].end = base_addr;
+
+	resources[2].start = base_addr + 1;
+	resources[2].end   = base_addr + 1;
+
+	/* The driver core will probe for us.  We know sl811-hcd has been
+	 * initialized already because of the link order dependency created
+	 * by referencing "sl811h_driver".
+	 */
+	platform_dev.name = sl811h_driver.driver.name;
+	return platform_device_register(&platform_dev);
+}
+
+/*====================================================================*/
+
+static void sl811_cs_detach(struct pcmcia_device *link)
+{
+	dev_dbg(&link->dev, "sl811_cs_detach\n");
+
+	sl811_cs_release(link);
+
+	/* This points to the parent local_info_t struct */
+	kfree(link->priv);
+}
+
+static void sl811_cs_release(struct pcmcia_device * link)
+{
+	dev_dbg(&link->dev, "sl811_cs_release\n");
+
+	pcmcia_disable_device(link);
+	platform_device_unregister(&platform_dev);
+}
+
+static int sl811_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
+{
+	if (p_dev->config_index == 0)
+		return -EINVAL;
+
+	return pcmcia_request_io(p_dev);
+}
+
+
+static int sl811_cs_config(struct pcmcia_device *link)
+{
+	struct device		*parent = &link->dev;
+	int			ret;
+
+	dev_dbg(&link->dev, "sl811_cs_config\n");
+
+	link->config_flags |= CONF_ENABLE_IRQ |	CONF_AUTO_SET_VPP |
+		CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO;
+
+	if (pcmcia_loop_config(link, sl811_cs_config_check, NULL))
+		goto failed;
+
+	/* require an IRQ and two registers */
+	if (resource_size(link->resource[0]) < 2)
+		goto failed;
+
+	if (!link->irq)
+		goto failed;
+
+	ret = pcmcia_enable_device(link);
+	if (ret)
+		goto failed;
+
+	if (sl811_hc_init(parent, link->resource[0]->start, link->irq)
+			< 0) {
+failed:
+		printk(KERN_WARNING "sl811_cs_config failed\n");
+		sl811_cs_release(link);
+		return  -ENODEV;
+	}
+	return 0;
+}
+
+static int sl811_cs_probe(struct pcmcia_device *link)
+{
+	local_info_t *local;
+
+	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
+	if (!local)
+		return -ENOMEM;
+	local->p_dev = link;
+	link->priv = local;
+
+	return sl811_cs_config(link);
+}
+
+static const struct pcmcia_device_id sl811_ids[] = {
+	PCMCIA_DEVICE_MANF_CARD(0xc015, 0x0001), /* RATOC USB HOST CF+ Card */
+	PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, sl811_ids);
+
+static struct pcmcia_driver sl811_cs_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "sl811_cs",
+	.probe		= sl811_cs_probe,
+	.remove		= sl811_cs_detach,
+	.id_table	= sl811_ids,
+};
+module_pcmcia_driver(sl811_cs_driver);
diff --git a/drivers/usb/host/ssb-hcd.c b/drivers/usb/host/ssb-hcd.c
new file mode 100644
index 000000000..016987764
--- /dev/null
+++ b/drivers/usb/host/ssb-hcd.c
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sonics Silicon Backplane
+ * Broadcom USB-core driver  (SSB bus glue)
+ *
+ * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Based on ssb-ohci driver
+ * Copyright 2007 Michael Buesch <m@bues.ch>
+ *
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ *
+ * Derived from the USBcore related parts of Broadcom-SB
+ * Copyright 2005-2011 Broadcom Corporation
+ */
+#include <linux/ssb/ssb.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+
+MODULE_AUTHOR("Hauke Mehrtens");
+MODULE_DESCRIPTION("Common USB driver for SSB Bus");
+MODULE_LICENSE("GPL");
+
+#define SSB_HCD_TMSLOW_HOSTMODE	(1 << 29)
+
+struct ssb_hcd_device {
+	struct platform_device *ehci_dev;
+	struct platform_device *ohci_dev;
+
+	u32 enable_flags;
+};
+
+static void ssb_hcd_5354wa(struct ssb_device *dev)
+{
+#ifdef CONFIG_SSB_DRIVER_MIPS
+	/* Work around for 5354 failures */
+	if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
+		/* Change syn01 reg */
+		ssb_write32(dev, 0x894, 0x00fe00fe);
+
+		/* Change syn03 reg */
+		ssb_write32(dev, 0x89c, ssb_read32(dev, 0x89c) | 0x1);
+	}
+#endif
+}
+
+static void ssb_hcd_usb20wa(struct ssb_device *dev)
+{
+	if (dev->id.coreid == SSB_DEV_USB20_HOST) {
+		/*
+		 * USB 2.0 special considerations:
+		 *
+		 * In addition to the standard SSB reset sequence, the Host
+		 * Control Register must be programmed to bring the USB core
+		 * and various phy components out of reset.
+		 */
+		ssb_write32(dev, 0x200, 0x7ff);
+
+		/* Change Flush control reg */
+		ssb_write32(dev, 0x400, ssb_read32(dev, 0x400) & ~8);
+		ssb_read32(dev, 0x400);
+
+		/* Change Shim control reg */
+		ssb_write32(dev, 0x304, ssb_read32(dev, 0x304) & ~0x100);
+		ssb_read32(dev, 0x304);
+
+		udelay(1);
+
+		ssb_hcd_5354wa(dev);
+	}
+}
+
+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
+static u32 ssb_hcd_init_chip(struct ssb_device *dev)
+{
+	u32 flags = 0;
+
+	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
+		/* Put the device into host-mode. */
+		flags |= SSB_HCD_TMSLOW_HOSTMODE;
+
+	ssb_device_enable(dev, flags);
+
+	ssb_hcd_usb20wa(dev);
+
+	return flags;
+}
+
+static const struct usb_ehci_pdata ehci_pdata = {
+};
+
+static const struct usb_ohci_pdata ohci_pdata = {
+};
+
+static struct platform_device *ssb_hcd_create_pdev(struct ssb_device *dev, bool ohci, u32 addr, u32 len)
+{
+	struct platform_device *hci_dev;
+	struct resource hci_res[2];
+	int ret;
+
+	memset(hci_res, 0, sizeof(hci_res));
+
+	hci_res[0].start = addr;
+	hci_res[0].end = hci_res[0].start + len - 1;
+	hci_res[0].flags = IORESOURCE_MEM;
+
+	hci_res[1].start = dev->irq;
+	hci_res[1].flags = IORESOURCE_IRQ;
+
+	hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
+					"ehci-platform" , 0);
+	if (!hci_dev)
+		return ERR_PTR(-ENOMEM);
+
+	hci_dev->dev.parent = dev->dev;
+	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
+
+	ret = platform_device_add_resources(hci_dev, hci_res,
+					    ARRAY_SIZE(hci_res));
+	if (ret)
+		goto err_alloc;
+	if (ohci)
+		ret = platform_device_add_data(hci_dev, &ohci_pdata,
+					       sizeof(ohci_pdata));
+	else
+		ret = platform_device_add_data(hci_dev, &ehci_pdata,
+					       sizeof(ehci_pdata));
+	if (ret)
+		goto err_alloc;
+	ret = platform_device_add(hci_dev);
+	if (ret)
+		goto err_alloc;
+
+	return hci_dev;
+
+err_alloc:
+	platform_device_put(hci_dev);
+	return ERR_PTR(ret);
+}
+
+static int ssb_hcd_probe(struct ssb_device *dev,
+				   const struct ssb_device_id *id)
+{
+	int err, tmp;
+	int start, len;
+	u16 chipid_top;
+	u16 coreid = dev->id.coreid;
+	struct ssb_hcd_device *usb_dev;
+
+	/* USBcores are only connected on embedded devices. */
+	chipid_top = (dev->bus->chip_id & 0xFF00);
+	if (chipid_top != 0x4700 && chipid_top != 0x5300)
+		return -ENODEV;
+
+	/* TODO: Probably need checks here; is the core connected? */
+
+	if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
+		return -EOPNOTSUPP;
+
+	usb_dev = devm_kzalloc(dev->dev, sizeof(struct ssb_hcd_device),
+			       GFP_KERNEL);
+	if (!usb_dev)
+		return -ENOMEM;
+
+	/* We currently always attach SSB_DEV_USB11_HOSTDEV
+	 * as HOST OHCI. If we want to attach it as Client device,
+	 * we must branch here and call into the (yet to
+	 * be written) Client mode driver. Same for remove(). */
+	usb_dev->enable_flags = ssb_hcd_init_chip(dev);
+
+	tmp = ssb_read32(dev, SSB_ADMATCH0);
+
+	start = ssb_admatch_base(tmp);
+	len = (coreid == SSB_DEV_USB20_HOST) ? 0x800 : ssb_admatch_size(tmp);
+	usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, true, start, len);
+	if (IS_ERR(usb_dev->ohci_dev))
+		return PTR_ERR(usb_dev->ohci_dev);
+
+	if (coreid == SSB_DEV_USB20_HOST) {
+		start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
+		usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, false, start, len);
+		if (IS_ERR(usb_dev->ehci_dev)) {
+			err = PTR_ERR(usb_dev->ehci_dev);
+			goto err_unregister_ohci_dev;
+		}
+	}
+
+	ssb_set_drvdata(dev, usb_dev);
+	return 0;
+
+err_unregister_ohci_dev:
+	platform_device_unregister(usb_dev->ohci_dev);
+	return err;
+}
+
+static void ssb_hcd_remove(struct ssb_device *dev)
+{
+	struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
+	struct platform_device *ohci_dev = usb_dev->ohci_dev;
+	struct platform_device *ehci_dev = usb_dev->ehci_dev;
+
+	if (ohci_dev)
+		platform_device_unregister(ohci_dev);
+	if (ehci_dev)
+		platform_device_unregister(ehci_dev);
+
+	ssb_device_disable(dev, 0);
+}
+
+static void ssb_hcd_shutdown(struct ssb_device *dev)
+{
+	ssb_device_disable(dev, 0);
+}
+
+#ifdef CONFIG_PM
+
+static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state)
+{
+	ssb_device_disable(dev, 0);
+
+	return 0;
+}
+
+static int ssb_hcd_resume(struct ssb_device *dev)
+{
+	struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
+
+	ssb_device_enable(dev, usb_dev->enable_flags);
+
+	return 0;
+}
+
+#else /* !CONFIG_PM */
+#define ssb_hcd_suspend	NULL
+#define ssb_hcd_resume	NULL
+#endif /* CONFIG_PM */
+
+static const struct ssb_device_id ssb_hcd_table[] = {
+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
+	{},
+};
+MODULE_DEVICE_TABLE(ssb, ssb_hcd_table);
+
+static struct ssb_driver ssb_hcd_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= ssb_hcd_table,
+	.probe		= ssb_hcd_probe,
+	.remove		= ssb_hcd_remove,
+	.shutdown	= ssb_hcd_shutdown,
+	.suspend	= ssb_hcd_suspend,
+	.resume		= ssb_hcd_resume,
+};
+
+static int __init ssb_hcd_init(void)
+{
+	return ssb_driver_register(&ssb_hcd_driver);
+}
+module_init(ssb_hcd_init);
+
+static void __exit ssb_hcd_exit(void)
+{
+	ssb_driver_unregister(&ssb_hcd_driver);
+}
+module_exit(ssb_hcd_exit);
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
new file mode 100644
index 000000000..95240c9c4
--- /dev/null
+++ b/drivers/usb/host/u132-hcd.c
@@ -0,0 +1,3219 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+* Host Controller Driver for the Elan Digital Systems U132 adapter
+*
+* Copyright(C) 2006 Elan Digital Systems Limited
+* http://www.elandigitalsystems.com
+*
+* Author and Maintainer - Tony Olech - Elan Digital Systems
+* tony.olech@elandigitalsystems.com
+*
+* This driver was written by Tony Olech(tony.olech@elandigitalsystems.com)
+* based on various USB host drivers in the 2.6.15 linux kernel
+* with constant reference to the 3rd Edition of Linux Device Drivers
+* published by O'Reilly
+*
+* The U132 adapter is a USB to CardBus adapter specifically designed
+* for PC cards that contain an OHCI host controller. Typical PC cards
+* are the Orange Mobile 3G Option GlobeTrotter Fusion card.
+*
+* The U132 adapter will *NOT *work with PC cards that do not contain
+* an OHCI controller. A simple way to test whether a PC card has an
+* OHCI controller as an interface is to insert the PC card directly
+* into a laptop(or desktop) with a CardBus slot and if "lspci" shows
+* a new USB controller and "lsusb -v" shows a new OHCI Host Controller
+* then there is a good chance that the U132 adapter will support the
+* PC card.(you also need the specific client driver for the PC card)
+*
+* Please inform the Author and Maintainer about any PC cards that
+* contain OHCI Host Controller and work when directly connected to
+* an embedded CardBus slot but do not work when they are connected
+* via an ELAN U132 adapter.
+*
+*/
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/pci_ids.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+
+	/* FIXME ohci.h is ONLY for internal use by the OHCI driver.
+	 * If you're going to try stuff like this, you need to split
+	 * out shareable stuff (register declarations?) into its own
+	 * file, maybe name <linux/usb/ohci.h>
+	 */
+
+#include "ohci.h"
+#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
+#define OHCI_INTR_INIT (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | \
+	OHCI_INTR_WDH)
+MODULE_AUTHOR("Tony Olech - Elan Digital Systems Limited");
+MODULE_DESCRIPTION("U132 USB Host Controller Driver");
+MODULE_LICENSE("GPL");
+#define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444)
+INT_MODULE_PARM(testing, 0);
+/* Some boards misreport power switching/overcurrent*/
+static bool distrust_firmware = true;
+module_param(distrust_firmware, bool, 0);
+MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurrent"
+	"t setup");
+static DECLARE_WAIT_QUEUE_HEAD(u132_hcd_wait);
+/*
+* u132_module_lock exists to protect access to global variables
+*
+*/
+static DEFINE_MUTEX(u132_module_lock);
+static int u132_exiting;
+static int u132_instances;
+/*
+* end of the global variables protected by u132_module_lock
+*/
+static struct workqueue_struct *workqueue;
+#define MAX_U132_PORTS 7
+#define MAX_U132_ADDRS 128
+#define MAX_U132_UDEVS 4
+#define MAX_U132_ENDPS 100
+#define MAX_U132_RINGS 4
+static const char *cc_to_text[16] = {
+	"No Error ",
+	"CRC Error ",
+	"Bit Stuff ",
+	"Data Togg ",
+	"Stall ",
+	"DevNotResp ",
+	"PIDCheck ",
+	"UnExpPID ",
+	"DataOver ",
+	"DataUnder ",
+	"(for hw) ",
+	"(for hw) ",
+	"BufferOver ",
+	"BuffUnder ",
+	"(for HCD) ",
+	"(for HCD) "
+};
+struct u132_port {
+	struct u132 *u132;
+	int reset;
+	int enable;
+	int power;
+	int Status;
+};
+struct u132_addr {
+	u8 address;
+};
+struct u132_udev {
+	struct kref kref;
+	struct usb_device *usb_device;
+	u8 enumeration;
+	u8 udev_number;
+	u8 usb_addr;
+	u8 portnumber;
+	u8 endp_number_in[16];
+	u8 endp_number_out[16];
+};
+#define ENDP_QUEUE_SHIFT 3
+#define ENDP_QUEUE_SIZE (1<<ENDP_QUEUE_SHIFT)
+#define ENDP_QUEUE_MASK (ENDP_QUEUE_SIZE-1)
+struct u132_urbq {
+	struct list_head urb_more;
+	struct urb *urb;
+};
+struct u132_spin {
+	spinlock_t slock;
+};
+struct u132_endp {
+	struct kref kref;
+	u8 udev_number;
+	u8 endp_number;
+	u8 usb_addr;
+	u8 usb_endp;
+	struct u132 *u132;
+	struct list_head endp_ring;
+	struct u132_ring *ring;
+	unsigned toggle_bits:2;
+	unsigned active:1;
+	unsigned delayed:1;
+	unsigned input:1;
+	unsigned output:1;
+	unsigned pipetype:2;
+	unsigned dequeueing:1;
+	unsigned edset_flush:1;
+	unsigned spare_bits:14;
+	unsigned long jiffies;
+	struct usb_host_endpoint *hep;
+	struct u132_spin queue_lock;
+	u16 queue_size;
+	u16 queue_last;
+	u16 queue_next;
+	struct urb *urb_list[ENDP_QUEUE_SIZE];
+	struct list_head urb_more;
+	struct delayed_work scheduler;
+};
+struct u132_ring {
+	unsigned in_use:1;
+	unsigned length:7;
+	u8 number;
+	struct u132 *u132;
+	struct u132_endp *curr_endp;
+	struct delayed_work scheduler;
+};
+struct u132 {
+	struct kref kref;
+	struct mutex sw_lock;
+	struct mutex scheduler_lock;
+	struct u132_platform_data *board;
+	struct platform_device *platform_dev;
+	struct u132_ring ring[MAX_U132_RINGS];
+	int sequence_num;
+	int going;
+	int power;
+	int reset;
+	int num_ports;
+	u32 hc_control;
+	u32 hc_fminterval;
+	u32 hc_roothub_status;
+	u32 hc_roothub_a;
+	u32 hc_roothub_portstatus[MAX_ROOT_PORTS];
+	int flags;
+	unsigned long next_statechange;
+	struct delayed_work monitor;
+	int num_endpoints;
+	struct u132_addr addr[MAX_U132_ADDRS];
+	struct u132_udev udev[MAX_U132_UDEVS];
+	struct u132_port port[MAX_U132_PORTS];
+	struct u132_endp *endp[MAX_U132_ENDPS];
+};
+
+/*
+* these cannot be inlines because we need the structure offset!!
+* Does anyone have a better way?????
+*/
+#define ftdi_read_pcimem(pdev, member, data) usb_ftdi_elan_read_pcimem(pdev, \
+	offsetof(struct ohci_regs, member), 0, data);
+#define ftdi_write_pcimem(pdev, member, data) usb_ftdi_elan_write_pcimem(pdev, \
+	offsetof(struct ohci_regs, member), 0, data)
+#define u132_read_pcimem(u132, member, data) \
+	usb_ftdi_elan_read_pcimem(u132->platform_dev, offsetof(struct \
+	ohci_regs, member), 0, data)
+#define u132_write_pcimem(u132, member, data) \
+	usb_ftdi_elan_write_pcimem(u132->platform_dev, offsetof(struct \
+	ohci_regs, member), 0, data)
+static inline struct u132 *udev_to_u132(struct u132_udev *udev)
+{
+	u8 udev_number = udev->udev_number;
+	return container_of(udev, struct u132, udev[udev_number]);
+}
+
+static inline struct u132 *hcd_to_u132(struct usb_hcd *hcd)
+{
+	return (struct u132 *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *u132_to_hcd(struct u132 *u132)
+{
+	return container_of((void *)u132, struct usb_hcd, hcd_priv);
+}
+
+static inline void u132_disable(struct u132 *u132)
+{
+	u132_to_hcd(u132)->state = HC_STATE_HALT;
+}
+
+
+#define kref_to_u132(d) container_of(d, struct u132, kref)
+#define kref_to_u132_endp(d) container_of(d, struct u132_endp, kref)
+#define kref_to_u132_udev(d) container_of(d, struct u132_udev, kref)
+#include "../misc/usb_u132.h"
+static const char hcd_name[] = "u132_hcd";
+#define PORT_C_MASK ((USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE | \
+	USB_PORT_STAT_C_SUSPEND | USB_PORT_STAT_C_OVERCURRENT | \
+	USB_PORT_STAT_C_RESET) << 16)
+static void u132_hcd_delete(struct kref *kref)
+{
+	struct u132 *u132 = kref_to_u132(kref);
+	struct platform_device *pdev = u132->platform_dev;
+	struct usb_hcd *hcd = u132_to_hcd(u132);
+	u132->going += 1;
+	mutex_lock(&u132_module_lock);
+	u132_instances -= 1;
+	mutex_unlock(&u132_module_lock);
+	dev_warn(&u132->platform_dev->dev, "FREEING the hcd=%p and thus the u13"
+		"2=%p going=%d pdev=%p\n", hcd, u132, u132->going, pdev);
+	usb_put_hcd(hcd);
+}
+
+static inline void u132_u132_put_kref(struct u132 *u132)
+{
+	kref_put(&u132->kref, u132_hcd_delete);
+}
+
+static inline void u132_u132_init_kref(struct u132 *u132)
+{
+	kref_init(&u132->kref);
+}
+
+static void u132_udev_delete(struct kref *kref)
+{
+	struct u132_udev *udev = kref_to_u132_udev(kref);
+	udev->udev_number = 0;
+	udev->usb_device = NULL;
+	udev->usb_addr = 0;
+	udev->enumeration = 0;
+}
+
+static inline void u132_udev_put_kref(struct u132 *u132, struct u132_udev *udev)
+{
+	kref_put(&udev->kref, u132_udev_delete);
+}
+
+static inline void u132_udev_get_kref(struct u132 *u132, struct u132_udev *udev)
+{
+	kref_get(&udev->kref);
+}
+
+static inline void u132_udev_init_kref(struct u132 *u132,
+	struct u132_udev *udev)
+{
+	kref_init(&udev->kref);
+}
+
+static inline void u132_ring_put_kref(struct u132 *u132, struct u132_ring *ring)
+{
+	kref_put(&u132->kref, u132_hcd_delete);
+}
+
+static void u132_ring_requeue_work(struct u132 *u132, struct u132_ring *ring,
+	unsigned int delta)
+{
+	if (delta > 0) {
+		if (queue_delayed_work(workqueue, &ring->scheduler, delta))
+			return;
+	} else if (queue_delayed_work(workqueue, &ring->scheduler, 0))
+		return;
+	kref_put(&u132->kref, u132_hcd_delete);
+}
+
+static void u132_ring_queue_work(struct u132 *u132, struct u132_ring *ring,
+	unsigned int delta)
+{
+	kref_get(&u132->kref);
+	u132_ring_requeue_work(u132, ring, delta);
+}
+
+static void u132_ring_cancel_work(struct u132 *u132, struct u132_ring *ring)
+{
+	if (cancel_delayed_work(&ring->scheduler))
+		kref_put(&u132->kref, u132_hcd_delete);
+}
+
+static void u132_endp_delete(struct kref *kref)
+{
+	struct u132_endp *endp = kref_to_u132_endp(kref);
+	struct u132 *u132 = endp->u132;
+	u8 usb_addr = endp->usb_addr;
+	u8 usb_endp = endp->usb_endp;
+	u8 address = u132->addr[usb_addr].address;
+	struct u132_udev *udev = &u132->udev[address];
+	u8 endp_number = endp->endp_number;
+	struct usb_host_endpoint *hep = endp->hep;
+	struct u132_ring *ring = endp->ring;
+	struct list_head *head = &endp->endp_ring;
+	ring->length -= 1;
+	if (endp == ring->curr_endp) {
+		if (list_empty(head)) {
+			ring->curr_endp = NULL;
+			list_del(head);
+		} else {
+			struct u132_endp *next_endp = list_entry(head->next,
+				struct u132_endp, endp_ring);
+			ring->curr_endp = next_endp;
+			list_del(head);
+		}
+	} else
+		list_del(head);
+	if (endp->input) {
+		udev->endp_number_in[usb_endp] = 0;
+		u132_udev_put_kref(u132, udev);
+	}
+	if (endp->output) {
+		udev->endp_number_out[usb_endp] = 0;
+		u132_udev_put_kref(u132, udev);
+	}
+	u132->endp[endp_number - 1] = NULL;
+	hep->hcpriv = NULL;
+	kfree(endp);
+	u132_u132_put_kref(u132);
+}
+
+static inline void u132_endp_put_kref(struct u132 *u132, struct u132_endp *endp)
+{
+	kref_put(&endp->kref, u132_endp_delete);
+}
+
+static inline void u132_endp_get_kref(struct u132 *u132, struct u132_endp *endp)
+{
+	kref_get(&endp->kref);
+}
+
+static inline void u132_endp_init_kref(struct u132 *u132,
+	struct u132_endp *endp)
+{
+	kref_init(&endp->kref);
+	kref_get(&u132->kref);
+}
+
+static void u132_endp_queue_work(struct u132 *u132, struct u132_endp *endp,
+	unsigned int delta)
+{
+	if (queue_delayed_work(workqueue, &endp->scheduler, delta))
+		kref_get(&endp->kref);
+}
+
+static void u132_endp_cancel_work(struct u132 *u132, struct u132_endp *endp)
+{
+	if (cancel_delayed_work(&endp->scheduler))
+		kref_put(&endp->kref, u132_endp_delete);
+}
+
+static inline void u132_monitor_put_kref(struct u132 *u132)
+{
+	kref_put(&u132->kref, u132_hcd_delete);
+}
+
+static void u132_monitor_queue_work(struct u132 *u132, unsigned int delta)
+{
+	if (queue_delayed_work(workqueue, &u132->monitor, delta))
+		kref_get(&u132->kref);
+}
+
+static void u132_monitor_requeue_work(struct u132 *u132, unsigned int delta)
+{
+	if (!queue_delayed_work(workqueue, &u132->monitor, delta))
+		kref_put(&u132->kref, u132_hcd_delete);
+}
+
+static void u132_monitor_cancel_work(struct u132 *u132)
+{
+	if (cancel_delayed_work(&u132->monitor))
+		kref_put(&u132->kref, u132_hcd_delete);
+}
+
+static int read_roothub_info(struct u132 *u132)
+{
+	u32 revision;
+	int retval;
+	retval = u132_read_pcimem(u132, revision, &revision);
+	if (retval) {
+		dev_err(&u132->platform_dev->dev, "error %d accessing device co"
+			"ntrol\n", retval);
+		return retval;
+	} else if ((revision & 0xFF) == 0x10) {
+	} else if ((revision & 0xFF) == 0x11) {
+	} else {
+		dev_err(&u132->platform_dev->dev, "device revision is not valid"
+			" %08X\n", revision);
+		return -ENODEV;
+	}
+	retval = u132_read_pcimem(u132, control, &u132->hc_control);
+	if (retval) {
+		dev_err(&u132->platform_dev->dev, "error %d accessing device co"
+			"ntrol\n", retval);
+		return retval;
+	}
+	retval = u132_read_pcimem(u132, roothub.status,
+		&u132->hc_roothub_status);
+	if (retval) {
+		dev_err(&u132->platform_dev->dev, "error %d accessing device re"
+			"g roothub.status\n", retval);
+		return retval;
+	}
+	retval = u132_read_pcimem(u132, roothub.a, &u132->hc_roothub_a);
+	if (retval) {
+		dev_err(&u132->platform_dev->dev, "error %d accessing device re"
+			"g roothub.a\n", retval);
+		return retval;
+	}
+	{
+		int I = u132->num_ports;
+		int i = 0;
+		while (I-- > 0) {
+			retval = u132_read_pcimem(u132, roothub.portstatus[i],
+				&u132->hc_roothub_portstatus[i]);
+			if (retval) {
+				dev_err(&u132->platform_dev->dev, "error %d acc"
+					"essing device roothub.portstatus[%d]\n"
+					, retval, i);
+				return retval;
+			} else
+				i += 1;
+		}
+	}
+	return 0;
+}
+
+static void u132_hcd_monitor_work(struct work_struct *work)
+{
+	struct u132 *u132 = container_of(work, struct u132, monitor.work);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		u132_monitor_put_kref(u132);
+		return;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed\n");
+		u132_monitor_put_kref(u132);
+		return;
+	} else {
+		int retval;
+		mutex_lock(&u132->sw_lock);
+		retval = read_roothub_info(u132);
+		if (retval) {
+			struct usb_hcd *hcd = u132_to_hcd(u132);
+			u132_disable(u132);
+			u132->going = 1;
+			mutex_unlock(&u132->sw_lock);
+			usb_hc_died(hcd);
+			ftdi_elan_gone_away(u132->platform_dev);
+			u132_monitor_put_kref(u132);
+			return;
+		} else {
+			u132_monitor_requeue_work(u132, 500);
+			mutex_unlock(&u132->sw_lock);
+			return;
+		}
+	}
+}
+
+static void u132_hcd_giveback_urb(struct u132 *u132, struct u132_endp *endp,
+	struct urb *urb, int status)
+{
+	struct u132_ring *ring;
+	unsigned long irqs;
+	struct usb_hcd *hcd = u132_to_hcd(u132);
+	urb->error_count = 0;
+	spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+	endp->queue_next += 1;
+	if (ENDP_QUEUE_SIZE > --endp->queue_size) {
+		endp->active = 0;
+		spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+	} else {
+		struct list_head *next = endp->urb_more.next;
+		struct u132_urbq *urbq = list_entry(next, struct u132_urbq,
+			urb_more);
+		list_del(next);
+		endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] =
+			urbq->urb;
+		endp->active = 0;
+		spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+		kfree(urbq);
+	}
+	mutex_lock(&u132->scheduler_lock);
+	ring = endp->ring;
+	ring->in_use = 0;
+	u132_ring_cancel_work(u132, ring);
+	u132_ring_queue_work(u132, ring, 0);
+	mutex_unlock(&u132->scheduler_lock);
+	u132_endp_put_kref(u132, endp);
+	usb_hcd_giveback_urb(hcd, urb, status);
+}
+
+static void u132_hcd_forget_urb(struct u132 *u132, struct u132_endp *endp,
+	struct urb *urb, int status)
+{
+	u132_endp_put_kref(u132, endp);
+}
+
+static void u132_hcd_abandon_urb(struct u132 *u132, struct u132_endp *endp,
+	struct urb *urb, int status)
+{
+	unsigned long irqs;
+	struct usb_hcd *hcd = u132_to_hcd(u132);
+	urb->error_count = 0;
+	spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+	endp->queue_next += 1;
+	if (ENDP_QUEUE_SIZE > --endp->queue_size) {
+		endp->active = 0;
+		spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+	} else {
+		struct list_head *next = endp->urb_more.next;
+		struct u132_urbq *urbq = list_entry(next, struct u132_urbq,
+			urb_more);
+		list_del(next);
+		endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] =
+			urbq->urb;
+		endp->active = 0;
+		spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+		kfree(urbq);
+	}
+	usb_hcd_giveback_urb(hcd, urb, status);
+}
+
+static inline int edset_input(struct u132 *u132, struct u132_ring *ring,
+	struct u132_endp *endp, struct urb *urb, u8 address, u8 toggle_bits,
+	void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+	int toggle_bits, int error_count, int condition_code, int repeat_number,
+	 int halted, int skipped, int actual, int non_null))
+{
+	return usb_ftdi_elan_edset_input(u132->platform_dev, ring->number, endp,
+		 urb, address, endp->usb_endp, toggle_bits, callback);
+}
+
+static inline int edset_setup(struct u132 *u132, struct u132_ring *ring,
+	struct u132_endp *endp, struct urb *urb, u8 address, u8 toggle_bits,
+	void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+	int toggle_bits, int error_count, int condition_code, int repeat_number,
+	 int halted, int skipped, int actual, int non_null))
+{
+	return usb_ftdi_elan_edset_setup(u132->platform_dev, ring->number, endp,
+		 urb, address, endp->usb_endp, toggle_bits, callback);
+}
+
+static inline int edset_single(struct u132 *u132, struct u132_ring *ring,
+	struct u132_endp *endp, struct urb *urb, u8 address, u8 toggle_bits,
+	void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+	int toggle_bits, int error_count, int condition_code, int repeat_number,
+	 int halted, int skipped, int actual, int non_null))
+{
+	return usb_ftdi_elan_edset_single(u132->platform_dev, ring->number,
+		endp, urb, address, endp->usb_endp, toggle_bits, callback);
+}
+
+static inline int edset_output(struct u132 *u132, struct u132_ring *ring,
+	struct u132_endp *endp, struct urb *urb, u8 address, u8 toggle_bits,
+	void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+	int toggle_bits, int error_count, int condition_code, int repeat_number,
+	 int halted, int skipped, int actual, int non_null))
+{
+	return usb_ftdi_elan_edset_output(u132->platform_dev, ring->number,
+		endp, urb, address, endp->usb_endp, toggle_bits, callback);
+}
+
+
+/*
+* must not LOCK sw_lock
+*
+*/
+static void u132_hcd_interrupt_recv(void *data, struct urb *urb, u8 *buf,
+	int len, int toggle_bits, int error_count, int condition_code,
+	int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+	struct u132_endp *endp = data;
+	struct u132 *u132 = endp->u132;
+	u8 address = u132->addr[endp->usb_addr].address;
+	struct u132_udev *udev = &u132->udev[address];
+	mutex_lock(&u132->scheduler_lock);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (endp->dequeueing) {
+		endp->dequeueing = 0;
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+		return;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed "
+				"urb=%p\n", urb);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (!urb->unlinked) {
+		struct u132_ring *ring = endp->ring;
+		u8 *u = urb->transfer_buffer + urb->actual_length;
+		u8 *b = buf;
+		int L = len;
+
+		while (L-- > 0)
+			*u++ = *b++;
+
+		urb->actual_length += len;
+		if ((condition_code == TD_CC_NOERROR) &&
+			(urb->transfer_buffer_length > urb->actual_length)) {
+			endp->toggle_bits = toggle_bits;
+			usb_settoggle(udev->usb_device, endp->usb_endp, 0,
+				1 & toggle_bits);
+			if (urb->actual_length > 0) {
+				int retval;
+				mutex_unlock(&u132->scheduler_lock);
+				retval = edset_single(u132, ring, endp, urb,
+					address, endp->toggle_bits,
+					u132_hcd_interrupt_recv);
+				if (retval != 0)
+					u132_hcd_giveback_urb(u132, endp, urb,
+						retval);
+			} else {
+				ring->in_use = 0;
+				endp->active = 0;
+				endp->jiffies = jiffies +
+					msecs_to_jiffies(urb->interval);
+				u132_ring_cancel_work(u132, ring);
+				u132_ring_queue_work(u132, ring, 0);
+				mutex_unlock(&u132->scheduler_lock);
+				u132_endp_put_kref(u132, endp);
+			}
+			return;
+		} else if ((condition_code == TD_DATAUNDERRUN) &&
+			((urb->transfer_flags & URB_SHORT_NOT_OK) == 0)) {
+			endp->toggle_bits = toggle_bits;
+			usb_settoggle(udev->usb_device, endp->usb_endp, 0,
+				1 & toggle_bits);
+			mutex_unlock(&u132->scheduler_lock);
+			u132_hcd_giveback_urb(u132, endp, urb, 0);
+			return;
+		} else {
+			if (condition_code == TD_CC_NOERROR) {
+				endp->toggle_bits = toggle_bits;
+				usb_settoggle(udev->usb_device, endp->usb_endp,
+					0, 1 & toggle_bits);
+			} else if (condition_code == TD_CC_STALL) {
+				endp->toggle_bits = 0x2;
+				usb_settoggle(udev->usb_device, endp->usb_endp,
+					0, 0);
+			} else {
+				endp->toggle_bits = 0x2;
+				usb_settoggle(udev->usb_device, endp->usb_endp,
+					0, 0);
+				dev_err(&u132->platform_dev->dev, "urb=%p givin"
+					"g back INTERRUPT %s\n", urb,
+					cc_to_text[condition_code]);
+			}
+			mutex_unlock(&u132->scheduler_lock);
+			u132_hcd_giveback_urb(u132, endp, urb,
+				cc_to_error[condition_code]);
+			return;
+		}
+	} else {
+		dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+				"unlinked=%d\n", urb, urb->unlinked);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, 0);
+		return;
+	}
+}
+
+static void u132_hcd_bulk_output_sent(void *data, struct urb *urb, u8 *buf,
+	int len, int toggle_bits, int error_count, int condition_code,
+	int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+	struct u132_endp *endp = data;
+	struct u132 *u132 = endp->u132;
+	u8 address = u132->addr[endp->usb_addr].address;
+	mutex_lock(&u132->scheduler_lock);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (endp->dequeueing) {
+		endp->dequeueing = 0;
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+		return;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed "
+				"urb=%p\n", urb);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (!urb->unlinked) {
+		struct u132_ring *ring = endp->ring;
+		urb->actual_length += len;
+		endp->toggle_bits = toggle_bits;
+		if (urb->transfer_buffer_length > urb->actual_length) {
+			int retval;
+			mutex_unlock(&u132->scheduler_lock);
+			retval = edset_output(u132, ring, endp, urb, address,
+				endp->toggle_bits, u132_hcd_bulk_output_sent);
+			if (retval != 0)
+				u132_hcd_giveback_urb(u132, endp, urb, retval);
+			return;
+		} else {
+			mutex_unlock(&u132->scheduler_lock);
+			u132_hcd_giveback_urb(u132, endp, urb, 0);
+			return;
+		}
+	} else {
+		dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+				"unlinked=%d\n", urb, urb->unlinked);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, 0);
+		return;
+	}
+}
+
+static void u132_hcd_bulk_input_recv(void *data, struct urb *urb, u8 *buf,
+	int len, int toggle_bits, int error_count, int condition_code,
+	int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+	struct u132_endp *endp = data;
+	struct u132 *u132 = endp->u132;
+	u8 address = u132->addr[endp->usb_addr].address;
+	struct u132_udev *udev = &u132->udev[address];
+	mutex_lock(&u132->scheduler_lock);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (endp->dequeueing) {
+		endp->dequeueing = 0;
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+		return;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed "
+				"urb=%p\n", urb);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (!urb->unlinked) {
+		struct u132_ring *ring = endp->ring;
+		u8 *u = urb->transfer_buffer + urb->actual_length;
+		u8 *b = buf;
+		int L = len;
+
+		while (L-- > 0)
+			*u++ = *b++;
+
+		urb->actual_length += len;
+		if ((condition_code == TD_CC_NOERROR) &&
+			(urb->transfer_buffer_length > urb->actual_length)) {
+			int retval;
+			endp->toggle_bits = toggle_bits;
+			usb_settoggle(udev->usb_device, endp->usb_endp, 0,
+				1 & toggle_bits);
+			mutex_unlock(&u132->scheduler_lock);
+			retval = usb_ftdi_elan_edset_input(u132->platform_dev,
+				ring->number, endp, urb, address,
+				endp->usb_endp, endp->toggle_bits,
+				u132_hcd_bulk_input_recv);
+			if (retval != 0)
+				u132_hcd_giveback_urb(u132, endp, urb, retval);
+			return;
+		} else if (condition_code == TD_CC_NOERROR) {
+			endp->toggle_bits = toggle_bits;
+			usb_settoggle(udev->usb_device, endp->usb_endp, 0,
+				1 & toggle_bits);
+			mutex_unlock(&u132->scheduler_lock);
+			u132_hcd_giveback_urb(u132, endp, urb,
+				cc_to_error[condition_code]);
+			return;
+		} else if ((condition_code == TD_DATAUNDERRUN) &&
+			((urb->transfer_flags & URB_SHORT_NOT_OK) == 0)) {
+			endp->toggle_bits = toggle_bits;
+			usb_settoggle(udev->usb_device, endp->usb_endp, 0,
+				1 & toggle_bits);
+			mutex_unlock(&u132->scheduler_lock);
+			u132_hcd_giveback_urb(u132, endp, urb, 0);
+			return;
+		} else if (condition_code == TD_DATAUNDERRUN) {
+			endp->toggle_bits = toggle_bits;
+			usb_settoggle(udev->usb_device, endp->usb_endp, 0,
+				1 & toggle_bits);
+			dev_warn(&u132->platform_dev->dev, "urb=%p(SHORT NOT OK"
+				") giving back BULK IN %s\n", urb,
+				cc_to_text[condition_code]);
+			mutex_unlock(&u132->scheduler_lock);
+			u132_hcd_giveback_urb(u132, endp, urb, 0);
+			return;
+		} else if (condition_code == TD_CC_STALL) {
+			endp->toggle_bits = 0x2;
+			usb_settoggle(udev->usb_device, endp->usb_endp, 0, 0);
+			mutex_unlock(&u132->scheduler_lock);
+			u132_hcd_giveback_urb(u132, endp, urb,
+				cc_to_error[condition_code]);
+			return;
+		} else {
+			endp->toggle_bits = 0x2;
+			usb_settoggle(udev->usb_device, endp->usb_endp, 0, 0);
+			dev_err(&u132->platform_dev->dev, "urb=%p giving back B"
+				"ULK IN code=%d %s\n", urb, condition_code,
+				cc_to_text[condition_code]);
+			mutex_unlock(&u132->scheduler_lock);
+			u132_hcd_giveback_urb(u132, endp, urb,
+				cc_to_error[condition_code]);
+			return;
+		}
+	} else {
+		dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+				"unlinked=%d\n", urb, urb->unlinked);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, 0);
+		return;
+	}
+}
+
+static void u132_hcd_configure_empty_sent(void *data, struct urb *urb, u8 *buf,
+	int len, int toggle_bits, int error_count, int condition_code,
+	int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+	struct u132_endp *endp = data;
+	struct u132 *u132 = endp->u132;
+	mutex_lock(&u132->scheduler_lock);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (endp->dequeueing) {
+		endp->dequeueing = 0;
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+		return;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed "
+				"urb=%p\n", urb);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (!urb->unlinked) {
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, 0);
+		return;
+	} else {
+		dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+				"unlinked=%d\n", urb, urb->unlinked);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, 0);
+		return;
+	}
+}
+
+static void u132_hcd_configure_input_recv(void *data, struct urb *urb, u8 *buf,
+	int len, int toggle_bits, int error_count, int condition_code,
+	int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+	struct u132_endp *endp = data;
+	struct u132 *u132 = endp->u132;
+	u8 address = u132->addr[endp->usb_addr].address;
+	mutex_lock(&u132->scheduler_lock);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (endp->dequeueing) {
+		endp->dequeueing = 0;
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+		return;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed "
+				"urb=%p\n", urb);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (!urb->unlinked) {
+		struct u132_ring *ring = endp->ring;
+		u8 *u = urb->transfer_buffer;
+		u8 *b = buf;
+		int L = len;
+
+		while (L-- > 0)
+			*u++ = *b++;
+
+		urb->actual_length = len;
+		if ((condition_code == TD_CC_NOERROR) || ((condition_code ==
+			TD_DATAUNDERRUN) && ((urb->transfer_flags &
+			URB_SHORT_NOT_OK) == 0))) {
+			int retval;
+			mutex_unlock(&u132->scheduler_lock);
+			retval = usb_ftdi_elan_edset_empty(u132->platform_dev,
+				ring->number, endp, urb, address,
+				endp->usb_endp, 0x3,
+				u132_hcd_configure_empty_sent);
+			if (retval != 0)
+				u132_hcd_giveback_urb(u132, endp, urb, retval);
+			return;
+		} else if (condition_code == TD_CC_STALL) {
+			mutex_unlock(&u132->scheduler_lock);
+			dev_warn(&u132->platform_dev->dev, "giving back SETUP I"
+				"NPUT STALL urb %p\n", urb);
+			u132_hcd_giveback_urb(u132, endp, urb,
+				cc_to_error[condition_code]);
+			return;
+		} else {
+			mutex_unlock(&u132->scheduler_lock);
+			dev_err(&u132->platform_dev->dev, "giving back SETUP IN"
+				"PUT %s urb %p\n", cc_to_text[condition_code],
+				urb);
+			u132_hcd_giveback_urb(u132, endp, urb,
+				cc_to_error[condition_code]);
+			return;
+		}
+	} else {
+		dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+				"unlinked=%d\n", urb, urb->unlinked);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, 0);
+		return;
+	}
+}
+
+static void u132_hcd_configure_empty_recv(void *data, struct urb *urb, u8 *buf,
+	int len, int toggle_bits, int error_count, int condition_code,
+	int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+	struct u132_endp *endp = data;
+	struct u132 *u132 = endp->u132;
+	mutex_lock(&u132->scheduler_lock);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (endp->dequeueing) {
+		endp->dequeueing = 0;
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+		return;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed "
+				"urb=%p\n", urb);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (!urb->unlinked) {
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, 0);
+		return;
+	} else {
+		dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+				"unlinked=%d\n", urb, urb->unlinked);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, 0);
+		return;
+	}
+}
+
+static void u132_hcd_configure_setup_sent(void *data, struct urb *urb, u8 *buf,
+	int len, int toggle_bits, int error_count, int condition_code,
+	int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+	struct u132_endp *endp = data;
+	struct u132 *u132 = endp->u132;
+	u8 address = u132->addr[endp->usb_addr].address;
+	mutex_lock(&u132->scheduler_lock);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (endp->dequeueing) {
+		endp->dequeueing = 0;
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+		return;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed "
+				"urb=%p\n", urb);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (!urb->unlinked) {
+		if (usb_pipein(urb->pipe)) {
+			int retval;
+			struct u132_ring *ring = endp->ring;
+			mutex_unlock(&u132->scheduler_lock);
+			retval = usb_ftdi_elan_edset_input(u132->platform_dev,
+				ring->number, endp, urb, address,
+				endp->usb_endp, 0,
+				u132_hcd_configure_input_recv);
+			if (retval != 0)
+				u132_hcd_giveback_urb(u132, endp, urb, retval);
+			return;
+		} else {
+			int retval;
+			struct u132_ring *ring = endp->ring;
+			mutex_unlock(&u132->scheduler_lock);
+			retval = usb_ftdi_elan_edset_input(u132->platform_dev,
+				ring->number, endp, urb, address,
+				endp->usb_endp, 0,
+				u132_hcd_configure_empty_recv);
+			if (retval != 0)
+				u132_hcd_giveback_urb(u132, endp, urb, retval);
+			return;
+		}
+	} else {
+		dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+				"unlinked=%d\n", urb, urb->unlinked);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, 0);
+		return;
+	}
+}
+
+static void u132_hcd_enumeration_empty_recv(void *data, struct urb *urb,
+	u8 *buf, int len, int toggle_bits, int error_count, int condition_code,
+	int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+	struct u132_endp *endp = data;
+	struct u132 *u132 = endp->u132;
+	u8 address = u132->addr[endp->usb_addr].address;
+	struct u132_udev *udev = &u132->udev[address];
+	mutex_lock(&u132->scheduler_lock);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (endp->dequeueing) {
+		endp->dequeueing = 0;
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+		return;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed "
+				"urb=%p\n", urb);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (!urb->unlinked) {
+		u132->addr[0].address = 0;
+		endp->usb_addr = udev->usb_addr;
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, 0);
+		return;
+	} else {
+		dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+				"unlinked=%d\n", urb, urb->unlinked);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, 0);
+		return;
+	}
+}
+
+static void u132_hcd_enumeration_address_sent(void *data, struct urb *urb,
+	u8 *buf, int len, int toggle_bits, int error_count, int condition_code,
+	int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+	struct u132_endp *endp = data;
+	struct u132 *u132 = endp->u132;
+	mutex_lock(&u132->scheduler_lock);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (endp->dequeueing) {
+		endp->dequeueing = 0;
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+		return;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed "
+				"urb=%p\n", urb);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (!urb->unlinked) {
+		int retval;
+		struct u132_ring *ring = endp->ring;
+		mutex_unlock(&u132->scheduler_lock);
+		retval = usb_ftdi_elan_edset_input(u132->platform_dev,
+			ring->number, endp, urb, 0, endp->usb_endp, 0,
+			u132_hcd_enumeration_empty_recv);
+		if (retval != 0)
+			u132_hcd_giveback_urb(u132, endp, urb, retval);
+		return;
+	} else {
+		dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+				"unlinked=%d\n", urb, urb->unlinked);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, 0);
+		return;
+	}
+}
+
+static void u132_hcd_initial_empty_sent(void *data, struct urb *urb, u8 *buf,
+	int len, int toggle_bits, int error_count, int condition_code,
+	int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+	struct u132_endp *endp = data;
+	struct u132 *u132 = endp->u132;
+	mutex_lock(&u132->scheduler_lock);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (endp->dequeueing) {
+		endp->dequeueing = 0;
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+		return;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed "
+				"urb=%p\n", urb);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (!urb->unlinked) {
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, 0);
+		return;
+	} else {
+		dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+				"unlinked=%d\n", urb, urb->unlinked);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, 0);
+		return;
+	}
+}
+
+static void u132_hcd_initial_input_recv(void *data, struct urb *urb, u8 *buf,
+	int len, int toggle_bits, int error_count, int condition_code,
+	int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+	struct u132_endp *endp = data;
+	struct u132 *u132 = endp->u132;
+	u8 address = u132->addr[endp->usb_addr].address;
+	mutex_lock(&u132->scheduler_lock);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (endp->dequeueing) {
+		endp->dequeueing = 0;
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+		return;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed "
+				"urb=%p\n", urb);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (!urb->unlinked) {
+		int retval;
+		struct u132_ring *ring = endp->ring;
+		u8 *u = urb->transfer_buffer;
+		u8 *b = buf;
+		int L = len;
+
+		while (L-- > 0)
+			*u++ = *b++;
+
+		urb->actual_length = len;
+		mutex_unlock(&u132->scheduler_lock);
+		retval = usb_ftdi_elan_edset_empty(u132->platform_dev,
+			ring->number, endp, urb, address, endp->usb_endp, 0x3,
+			u132_hcd_initial_empty_sent);
+		if (retval != 0)
+			u132_hcd_giveback_urb(u132, endp, urb, retval);
+		return;
+	} else {
+		dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+				"unlinked=%d\n", urb, urb->unlinked);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, 0);
+		return;
+	}
+}
+
+static void u132_hcd_initial_setup_sent(void *data, struct urb *urb, u8 *buf,
+	int len, int toggle_bits, int error_count, int condition_code,
+	int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+	struct u132_endp *endp = data;
+	struct u132 *u132 = endp->u132;
+	u8 address = u132->addr[endp->usb_addr].address;
+	mutex_lock(&u132->scheduler_lock);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (endp->dequeueing) {
+		endp->dequeueing = 0;
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+		return;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed "
+				"urb=%p\n", urb);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+		return;
+	} else if (!urb->unlinked) {
+		int retval;
+		struct u132_ring *ring = endp->ring;
+		mutex_unlock(&u132->scheduler_lock);
+		retval = usb_ftdi_elan_edset_input(u132->platform_dev,
+			ring->number, endp, urb, address, endp->usb_endp, 0,
+			u132_hcd_initial_input_recv);
+		if (retval != 0)
+			u132_hcd_giveback_urb(u132, endp, urb, retval);
+		return;
+	} else {
+		dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+				"unlinked=%d\n", urb, urb->unlinked);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_hcd_giveback_urb(u132, endp, urb, 0);
+		return;
+	}
+}
+
+/*
+* this work function is only executed from the work queue
+*
+*/
+static void u132_hcd_ring_work_scheduler(struct work_struct *work)
+{
+	struct u132_ring *ring =
+		container_of(work, struct u132_ring, scheduler.work);
+	struct u132 *u132 = ring->u132;
+	mutex_lock(&u132->scheduler_lock);
+	if (ring->in_use) {
+		mutex_unlock(&u132->scheduler_lock);
+		u132_ring_put_kref(u132, ring);
+		return;
+	} else if (ring->curr_endp) {
+		struct u132_endp *endp, *last_endp = ring->curr_endp;
+		unsigned long wakeup = 0;
+		list_for_each_entry(endp, &last_endp->endp_ring, endp_ring) {
+			if (endp->queue_next == endp->queue_last) {
+			} else if ((endp->delayed == 0)
+				|| time_after_eq(jiffies, endp->jiffies)) {
+				ring->curr_endp = endp;
+				u132_endp_cancel_work(u132, last_endp);
+				u132_endp_queue_work(u132, last_endp, 0);
+				mutex_unlock(&u132->scheduler_lock);
+				u132_ring_put_kref(u132, ring);
+				return;
+			} else {
+				unsigned long delta = endp->jiffies - jiffies;
+				if (delta > wakeup)
+					wakeup = delta;
+			}
+		}
+		if (last_endp->queue_next == last_endp->queue_last) {
+		} else if ((last_endp->delayed == 0) || time_after_eq(jiffies,
+			last_endp->jiffies)) {
+			u132_endp_cancel_work(u132, last_endp);
+			u132_endp_queue_work(u132, last_endp, 0);
+			mutex_unlock(&u132->scheduler_lock);
+			u132_ring_put_kref(u132, ring);
+			return;
+		} else {
+			unsigned long delta = last_endp->jiffies - jiffies;
+			if (delta > wakeup)
+				wakeup = delta;
+		}
+		if (wakeup > 0) {
+			u132_ring_requeue_work(u132, ring, wakeup);
+			mutex_unlock(&u132->scheduler_lock);
+			return;
+		} else {
+			mutex_unlock(&u132->scheduler_lock);
+			u132_ring_put_kref(u132, ring);
+			return;
+		}
+	} else {
+		mutex_unlock(&u132->scheduler_lock);
+		u132_ring_put_kref(u132, ring);
+		return;
+	}
+}
+
+static void u132_hcd_endp_work_scheduler(struct work_struct *work)
+{
+	struct u132_ring *ring;
+	struct u132_endp *endp =
+		container_of(work, struct u132_endp, scheduler.work);
+	struct u132 *u132 = endp->u132;
+	mutex_lock(&u132->scheduler_lock);
+	ring = endp->ring;
+	if (endp->edset_flush) {
+		endp->edset_flush = 0;
+		if (endp->dequeueing)
+			usb_ftdi_elan_edset_flush(u132->platform_dev,
+				ring->number, endp);
+		mutex_unlock(&u132->scheduler_lock);
+		u132_endp_put_kref(u132, endp);
+		return;
+	} else if (endp->active) {
+		mutex_unlock(&u132->scheduler_lock);
+		u132_endp_put_kref(u132, endp);
+		return;
+	} else if (ring->in_use) {
+		mutex_unlock(&u132->scheduler_lock);
+		u132_endp_put_kref(u132, endp);
+		return;
+	} else if (endp->queue_next == endp->queue_last) {
+		mutex_unlock(&u132->scheduler_lock);
+		u132_endp_put_kref(u132, endp);
+		return;
+	} else if (endp->pipetype == PIPE_INTERRUPT) {
+		u8 address = u132->addr[endp->usb_addr].address;
+		if (ring->in_use) {
+			mutex_unlock(&u132->scheduler_lock);
+			u132_endp_put_kref(u132, endp);
+			return;
+		} else {
+			int retval;
+			struct urb *urb = endp->urb_list[ENDP_QUEUE_MASK &
+				endp->queue_next];
+			endp->active = 1;
+			ring->curr_endp = endp;
+			ring->in_use = 1;
+			mutex_unlock(&u132->scheduler_lock);
+			retval = edset_single(u132, ring, endp, urb, address,
+				endp->toggle_bits, u132_hcd_interrupt_recv);
+			if (retval != 0)
+				u132_hcd_giveback_urb(u132, endp, urb, retval);
+			return;
+		}
+	} else if (endp->pipetype == PIPE_CONTROL) {
+		u8 address = u132->addr[endp->usb_addr].address;
+		if (ring->in_use) {
+			mutex_unlock(&u132->scheduler_lock);
+			u132_endp_put_kref(u132, endp);
+			return;
+		} else if (address == 0) {
+			int retval;
+			struct urb *urb = endp->urb_list[ENDP_QUEUE_MASK &
+				endp->queue_next];
+			endp->active = 1;
+			ring->curr_endp = endp;
+			ring->in_use = 1;
+			mutex_unlock(&u132->scheduler_lock);
+			retval = edset_setup(u132, ring, endp, urb, address,
+				0x2, u132_hcd_initial_setup_sent);
+			if (retval != 0)
+				u132_hcd_giveback_urb(u132, endp, urb, retval);
+			return;
+		} else if (endp->usb_addr == 0) {
+			int retval;
+			struct urb *urb = endp->urb_list[ENDP_QUEUE_MASK &
+				endp->queue_next];
+			endp->active = 1;
+			ring->curr_endp = endp;
+			ring->in_use = 1;
+			mutex_unlock(&u132->scheduler_lock);
+			retval = edset_setup(u132, ring, endp, urb, 0, 0x2,
+				u132_hcd_enumeration_address_sent);
+			if (retval != 0)
+				u132_hcd_giveback_urb(u132, endp, urb, retval);
+			return;
+		} else {
+			int retval;
+			struct urb *urb = endp->urb_list[ENDP_QUEUE_MASK &
+				endp->queue_next];
+			address = u132->addr[endp->usb_addr].address;
+			endp->active = 1;
+			ring->curr_endp = endp;
+			ring->in_use = 1;
+			mutex_unlock(&u132->scheduler_lock);
+			retval = edset_setup(u132, ring, endp, urb, address,
+				0x2, u132_hcd_configure_setup_sent);
+			if (retval != 0)
+				u132_hcd_giveback_urb(u132, endp, urb, retval);
+			return;
+		}
+	} else {
+		if (endp->input) {
+			u8 address = u132->addr[endp->usb_addr].address;
+			if (ring->in_use) {
+				mutex_unlock(&u132->scheduler_lock);
+				u132_endp_put_kref(u132, endp);
+				return;
+			} else {
+				int retval;
+				struct urb *urb = endp->urb_list[
+					ENDP_QUEUE_MASK & endp->queue_next];
+				endp->active = 1;
+				ring->curr_endp = endp;
+				ring->in_use = 1;
+				mutex_unlock(&u132->scheduler_lock);
+				retval = edset_input(u132, ring, endp, urb,
+					address, endp->toggle_bits,
+					u132_hcd_bulk_input_recv);
+				if (retval == 0) {
+				} else
+					u132_hcd_giveback_urb(u132, endp, urb,
+						retval);
+				return;
+			}
+		} else {	/* output pipe */
+			u8 address = u132->addr[endp->usb_addr].address;
+			if (ring->in_use) {
+				mutex_unlock(&u132->scheduler_lock);
+				u132_endp_put_kref(u132, endp);
+				return;
+			} else {
+				int retval;
+				struct urb *urb = endp->urb_list[
+					ENDP_QUEUE_MASK & endp->queue_next];
+				endp->active = 1;
+				ring->curr_endp = endp;
+				ring->in_use = 1;
+				mutex_unlock(&u132->scheduler_lock);
+				retval = edset_output(u132, ring, endp, urb,
+					address, endp->toggle_bits,
+					u132_hcd_bulk_output_sent);
+				if (retval == 0) {
+				} else
+					u132_hcd_giveback_urb(u132, endp, urb,
+						retval);
+				return;
+			}
+		}
+	}
+}
+#ifdef CONFIG_PM
+
+static void port_power(struct u132 *u132, int pn, int is_on)
+{
+	u132->port[pn].power = is_on;
+}
+
+#endif
+
+static void u132_power(struct u132 *u132, int is_on)
+{
+	struct usb_hcd *hcd = u132_to_hcd(u132)
+		;	/* hub is inactive unless the port is powered */
+	if (is_on) {
+		if (u132->power)
+			return;
+		u132->power = 1;
+	} else {
+		u132->power = 0;
+		hcd->state = HC_STATE_HALT;
+	}
+}
+
+static int u132_periodic_reinit(struct u132 *u132)
+{
+	int retval;
+	u32 fi = u132->hc_fminterval & 0x03fff;
+	u32 fit;
+	u32 fminterval;
+	retval = u132_read_pcimem(u132, fminterval, &fminterval);
+	if (retval)
+		return retval;
+	fit = fminterval & FIT;
+	retval = u132_write_pcimem(u132, fminterval,
+		(fit ^ FIT) | u132->hc_fminterval);
+	if (retval)
+		return retval;
+	return u132_write_pcimem(u132, periodicstart,
+	       ((9 * fi) / 10) & 0x3fff);
+}
+
+static char *hcfs2string(int state)
+{
+	switch (state) {
+	case OHCI_USB_RESET:
+		return "reset";
+	case OHCI_USB_RESUME:
+		return "resume";
+	case OHCI_USB_OPER:
+		return "operational";
+	case OHCI_USB_SUSPEND:
+		return "suspend";
+	}
+	return "?";
+}
+
+static int u132_init(struct u132 *u132)
+{
+	int retval;
+	u32 control;
+	u132_disable(u132);
+	u132->next_statechange = jiffies;
+	retval = u132_write_pcimem(u132, intrdisable, OHCI_INTR_MIE);
+	if (retval)
+		return retval;
+	retval = u132_read_pcimem(u132, control, &control);
+	if (retval)
+		return retval;
+	if (u132->num_ports == 0) {
+		u32 rh_a = -1;
+		retval = u132_read_pcimem(u132, roothub.a, &rh_a);
+		if (retval)
+			return retval;
+		u132->num_ports = rh_a & RH_A_NDP;
+		retval = read_roothub_info(u132);
+		if (retval)
+			return retval;
+	}
+	if (u132->num_ports > MAX_U132_PORTS)
+		return -EINVAL;
+
+	return 0;
+}
+
+
+/* Start an OHCI controller, set the BUS operational
+* resets USB and controller
+* enable interrupts
+*/
+static int u132_run(struct u132 *u132)
+{
+	int retval;
+	u32 control;
+	u32 status;
+	u32 fminterval;
+	u32 periodicstart;
+	u32 cmdstatus;
+	u32 roothub_a;
+	int mask = OHCI_INTR_INIT;
+	int first = u132->hc_fminterval == 0;
+	int sleep_time = 0;
+	int reset_timeout = 30;	/* ... allow extra time */
+	u132_disable(u132);
+	if (first) {
+		u32 temp;
+		retval = u132_read_pcimem(u132, fminterval, &temp);
+		if (retval)
+			return retval;
+		u132->hc_fminterval = temp & 0x3fff;
+		u132->hc_fminterval |= FSMP(u132->hc_fminterval) << 16;
+	}
+	retval = u132_read_pcimem(u132, control, &u132->hc_control);
+	if (retval)
+		return retval;
+	dev_info(&u132->platform_dev->dev, "resetting from state '%s', control "
+		"= %08X\n", hcfs2string(u132->hc_control & OHCI_CTRL_HCFS),
+		u132->hc_control);
+	switch (u132->hc_control & OHCI_CTRL_HCFS) {
+	case OHCI_USB_OPER:
+		sleep_time = 0;
+		break;
+	case OHCI_USB_SUSPEND:
+	case OHCI_USB_RESUME:
+		u132->hc_control &= OHCI_CTRL_RWC;
+		u132->hc_control |= OHCI_USB_RESUME;
+		sleep_time = 10;
+		break;
+	default:
+		u132->hc_control &= OHCI_CTRL_RWC;
+		u132->hc_control |= OHCI_USB_RESET;
+		sleep_time = 50;
+		break;
+	}
+	retval = u132_write_pcimem(u132, control, u132->hc_control);
+	if (retval)
+		return retval;
+	retval = u132_read_pcimem(u132, control, &control);
+	if (retval)
+		return retval;
+	msleep(sleep_time);
+	retval = u132_read_pcimem(u132, roothub.a, &roothub_a);
+	if (retval)
+		return retval;
+	if (!(roothub_a & RH_A_NPS)) {
+		int temp;	/* power down each port */
+		for (temp = 0; temp < u132->num_ports; temp++) {
+			retval = u132_write_pcimem(u132,
+				roothub.portstatus[temp], RH_PS_LSDA);
+			if (retval)
+				return retval;
+		}
+	}
+	retval = u132_read_pcimem(u132, control, &control);
+	if (retval)
+		return retval;
+retry:
+	retval = u132_read_pcimem(u132, cmdstatus, &status);
+	if (retval)
+		return retval;
+	retval = u132_write_pcimem(u132, cmdstatus, OHCI_HCR);
+	if (retval)
+		return retval;
+extra:	{
+		retval = u132_read_pcimem(u132, cmdstatus, &status);
+		if (retval)
+			return retval;
+		if (0 != (status & OHCI_HCR)) {
+			if (--reset_timeout == 0) {
+				dev_err(&u132->platform_dev->dev, "USB HC reset"
+					" timed out!\n");
+				return -ENODEV;
+			} else {
+				msleep(5);
+				goto extra;
+			}
+		}
+	}
+	if (u132->flags & OHCI_QUIRK_INITRESET) {
+		retval = u132_write_pcimem(u132, control, u132->hc_control);
+		if (retval)
+			return retval;
+		retval = u132_read_pcimem(u132, control, &control);
+		if (retval)
+			return retval;
+	}
+	retval = u132_write_pcimem(u132, ed_controlhead, 0x00000000);
+	if (retval)
+		return retval;
+	retval = u132_write_pcimem(u132, ed_bulkhead, 0x11000000);
+	if (retval)
+		return retval;
+	retval = u132_write_pcimem(u132, hcca, 0x00000000);
+	if (retval)
+		return retval;
+	retval = u132_periodic_reinit(u132);
+	if (retval)
+		return retval;
+	retval = u132_read_pcimem(u132, fminterval, &fminterval);
+	if (retval)
+		return retval;
+	retval = u132_read_pcimem(u132, periodicstart, &periodicstart);
+	if (retval)
+		return retval;
+	if (0 == (fminterval & 0x3fff0000) || 0 == periodicstart) {
+		if (!(u132->flags & OHCI_QUIRK_INITRESET)) {
+			u132->flags |= OHCI_QUIRK_INITRESET;
+			goto retry;
+		} else
+			dev_err(&u132->platform_dev->dev, "init err(%08x %04x)"
+				"\n", fminterval, periodicstart);
+	}			/* start controller operations */
+	u132->hc_control &= OHCI_CTRL_RWC;
+	u132->hc_control |= OHCI_CONTROL_INIT | OHCI_CTRL_BLE | OHCI_USB_OPER;
+	retval = u132_write_pcimem(u132, control, u132->hc_control);
+	if (retval)
+		return retval;
+	retval = u132_write_pcimem(u132, cmdstatus, OHCI_BLF);
+	if (retval)
+		return retval;
+	retval = u132_read_pcimem(u132, cmdstatus, &cmdstatus);
+	if (retval)
+		return retval;
+	retval = u132_read_pcimem(u132, control, &control);
+	if (retval)
+		return retval;
+	u132_to_hcd(u132)->state = HC_STATE_RUNNING;
+	retval = u132_write_pcimem(u132, roothub.status, RH_HS_DRWE);
+	if (retval)
+		return retval;
+	retval = u132_write_pcimem(u132, intrstatus, mask);
+	if (retval)
+		return retval;
+	retval = u132_write_pcimem(u132, intrdisable,
+		OHCI_INTR_MIE | OHCI_INTR_OC | OHCI_INTR_RHSC | OHCI_INTR_FNO |
+		OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_SF | OHCI_INTR_WDH |
+		OHCI_INTR_SO);
+	if (retval)
+		return retval;	/* handle root hub init quirks ... */
+	retval = u132_read_pcimem(u132, roothub.a, &roothub_a);
+	if (retval)
+		return retval;
+	roothub_a &= ~(RH_A_PSM | RH_A_OCPM);
+	if (u132->flags & OHCI_QUIRK_SUPERIO) {
+		roothub_a |= RH_A_NOCP;
+		roothub_a &= ~(RH_A_POTPGT | RH_A_NPS);
+		retval = u132_write_pcimem(u132, roothub.a, roothub_a);
+		if (retval)
+			return retval;
+	} else if ((u132->flags & OHCI_QUIRK_AMD756) || distrust_firmware) {
+		roothub_a |= RH_A_NPS;
+		retval = u132_write_pcimem(u132, roothub.a, roothub_a);
+		if (retval)
+			return retval;
+	}
+	retval = u132_write_pcimem(u132, roothub.status, RH_HS_LPSC);
+	if (retval)
+		return retval;
+	retval = u132_write_pcimem(u132, roothub.b,
+		(roothub_a & RH_A_NPS) ? 0 : RH_B_PPCM);
+	if (retval)
+		return retval;
+	retval = u132_read_pcimem(u132, control, &control);
+	if (retval)
+		return retval;
+	mdelay((roothub_a >> 23) & 0x1fe);
+	u132_to_hcd(u132)->state = HC_STATE_RUNNING;
+	return 0;
+}
+
+static void u132_hcd_stop(struct usb_hcd *hcd)
+{
+	struct u132 *u132 = hcd_to_u132(hcd);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "u132 device %p(hcd=%p) has b"
+			"een removed %d\n", u132, hcd, u132->going);
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov"
+			"ed\n", hcd);
+	} else {
+		mutex_lock(&u132->sw_lock);
+		msleep(100);
+		u132_power(u132, 0);
+		mutex_unlock(&u132->sw_lock);
+	}
+}
+
+static int u132_hcd_start(struct usb_hcd *hcd)
+{
+	struct u132 *u132 = hcd_to_u132(hcd);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		return -ENODEV;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed\n");
+		return -ESHUTDOWN;
+	} else if (hcd->self.controller) {
+		int retval;
+		struct platform_device *pdev =
+			to_platform_device(hcd->self.controller);
+		u16 vendor = ((struct u132_platform_data *)
+			dev_get_platdata(&pdev->dev))->vendor;
+		u16 device = ((struct u132_platform_data *)
+			dev_get_platdata(&pdev->dev))->device;
+		mutex_lock(&u132->sw_lock);
+		msleep(10);
+		if (vendor == PCI_VENDOR_ID_AMD && device == 0x740c) {
+			u132->flags = OHCI_QUIRK_AMD756;
+		} else if (vendor == PCI_VENDOR_ID_OPTI && device == 0xc861) {
+			dev_err(&u132->platform_dev->dev, "WARNING: OPTi workar"
+				"ounds unavailable\n");
+		} else if (vendor == PCI_VENDOR_ID_COMPAQ && device == 0xa0f8)
+			u132->flags |= OHCI_QUIRK_ZFMICRO;
+		retval = u132_run(u132);
+		if (retval) {
+			u132_disable(u132);
+			u132->going = 1;
+		}
+		msleep(100);
+		mutex_unlock(&u132->sw_lock);
+		return retval;
+	} else {
+		dev_err(&u132->platform_dev->dev, "platform_device missing\n");
+		return -ENODEV;
+	}
+}
+
+static int u132_hcd_reset(struct usb_hcd *hcd)
+{
+	struct u132 *u132 = hcd_to_u132(hcd);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		return -ENODEV;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed\n");
+		return -ESHUTDOWN;
+	} else {
+		int retval;
+		mutex_lock(&u132->sw_lock);
+		retval = u132_init(u132);
+		if (retval) {
+			u132_disable(u132);
+			u132->going = 1;
+		}
+		mutex_unlock(&u132->sw_lock);
+		return retval;
+	}
+}
+
+static int create_endpoint_and_queue_int(struct u132 *u132,
+	struct u132_udev *udev, struct urb *urb,
+	struct usb_device *usb_dev, u8 usb_addr, u8 usb_endp, u8 address,
+	gfp_t mem_flags)
+{
+	struct u132_ring *ring;
+	unsigned long irqs;
+	int rc;
+	u8 endp_number;
+	struct u132_endp *endp = kmalloc(sizeof(struct u132_endp), mem_flags);
+
+	if (!endp)
+		return -ENOMEM;
+
+	spin_lock_init(&endp->queue_lock.slock);
+	spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+	rc = usb_hcd_link_urb_to_ep(u132_to_hcd(u132), urb);
+	if (rc) {
+		spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+		kfree(endp);
+		return rc;
+	}
+
+	endp_number = ++u132->num_endpoints;
+	urb->ep->hcpriv = u132->endp[endp_number - 1] = endp;
+	INIT_DELAYED_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler);
+	INIT_LIST_HEAD(&endp->urb_more);
+	ring = endp->ring = &u132->ring[0];
+	if (ring->curr_endp) {
+		list_add_tail(&endp->endp_ring, &ring->curr_endp->endp_ring);
+	} else {
+		INIT_LIST_HEAD(&endp->endp_ring);
+		ring->curr_endp = endp;
+	}
+	ring->length += 1;
+	endp->dequeueing = 0;
+	endp->edset_flush = 0;
+	endp->active = 0;
+	endp->delayed = 0;
+	endp->endp_number = endp_number;
+	endp->u132 = u132;
+	endp->hep = urb->ep;
+	endp->pipetype = usb_pipetype(urb->pipe);
+	u132_endp_init_kref(u132, endp);
+	if (usb_pipein(urb->pipe)) {
+		endp->toggle_bits = 0x2;
+		usb_settoggle(udev->usb_device, usb_endp, 0, 0);
+		endp->input = 1;
+		endp->output = 0;
+		udev->endp_number_in[usb_endp] = endp_number;
+		u132_udev_get_kref(u132, udev);
+	} else {
+		endp->toggle_bits = 0x2;
+		usb_settoggle(udev->usb_device, usb_endp, 1, 0);
+		endp->input = 0;
+		endp->output = 1;
+		udev->endp_number_out[usb_endp] = endp_number;
+		u132_udev_get_kref(u132, udev);
+	}
+	urb->hcpriv = u132;
+	endp->delayed = 1;
+	endp->jiffies = jiffies + msecs_to_jiffies(urb->interval);
+	endp->udev_number = address;
+	endp->usb_addr = usb_addr;
+	endp->usb_endp = usb_endp;
+	endp->queue_size = 1;
+	endp->queue_last = 0;
+	endp->queue_next = 0;
+	endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb;
+	spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+	u132_endp_queue_work(u132, endp, msecs_to_jiffies(urb->interval));
+	return 0;
+}
+
+static int queue_int_on_old_endpoint(struct u132 *u132,
+	struct u132_udev *udev, struct urb *urb,
+	struct usb_device *usb_dev, struct u132_endp *endp, u8 usb_addr,
+	u8 usb_endp, u8 address)
+{
+	urb->hcpriv = u132;
+	endp->delayed = 1;
+	endp->jiffies = jiffies + msecs_to_jiffies(urb->interval);
+	if (endp->queue_size++ < ENDP_QUEUE_SIZE) {
+		endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb;
+	} else {
+		struct u132_urbq *urbq = kmalloc(sizeof(struct u132_urbq),
+			GFP_ATOMIC);
+		if (urbq == NULL) {
+			endp->queue_size -= 1;
+			return -ENOMEM;
+		} else {
+			list_add_tail(&urbq->urb_more, &endp->urb_more);
+			urbq->urb = urb;
+		}
+	}
+	return 0;
+}
+
+static int create_endpoint_and_queue_bulk(struct u132 *u132,
+	struct u132_udev *udev, struct urb *urb,
+	struct usb_device *usb_dev, u8 usb_addr, u8 usb_endp, u8 address,
+	gfp_t mem_flags)
+{
+	int ring_number;
+	struct u132_ring *ring;
+	unsigned long irqs;
+	int rc;
+	u8 endp_number;
+	struct u132_endp *endp = kmalloc(sizeof(struct u132_endp), mem_flags);
+
+	if (!endp)
+		return -ENOMEM;
+
+	spin_lock_init(&endp->queue_lock.slock);
+	spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+	rc = usb_hcd_link_urb_to_ep(u132_to_hcd(u132), urb);
+	if (rc) {
+		spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+		kfree(endp);
+		return rc;
+	}
+
+	endp_number = ++u132->num_endpoints;
+	urb->ep->hcpriv = u132->endp[endp_number - 1] = endp;
+	INIT_DELAYED_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler);
+	INIT_LIST_HEAD(&endp->urb_more);
+	endp->dequeueing = 0;
+	endp->edset_flush = 0;
+	endp->active = 0;
+	endp->delayed = 0;
+	endp->endp_number = endp_number;
+	endp->u132 = u132;
+	endp->hep = urb->ep;
+	endp->pipetype = usb_pipetype(urb->pipe);
+	u132_endp_init_kref(u132, endp);
+	if (usb_pipein(urb->pipe)) {
+		endp->toggle_bits = 0x2;
+		usb_settoggle(udev->usb_device, usb_endp, 0, 0);
+		ring_number = 3;
+		endp->input = 1;
+		endp->output = 0;
+		udev->endp_number_in[usb_endp] = endp_number;
+		u132_udev_get_kref(u132, udev);
+	} else {
+		endp->toggle_bits = 0x2;
+		usb_settoggle(udev->usb_device, usb_endp, 1, 0);
+		ring_number = 2;
+		endp->input = 0;
+		endp->output = 1;
+		udev->endp_number_out[usb_endp] = endp_number;
+		u132_udev_get_kref(u132, udev);
+	}
+	ring = endp->ring = &u132->ring[ring_number - 1];
+	if (ring->curr_endp) {
+		list_add_tail(&endp->endp_ring, &ring->curr_endp->endp_ring);
+	} else {
+		INIT_LIST_HEAD(&endp->endp_ring);
+		ring->curr_endp = endp;
+	}
+	ring->length += 1;
+	urb->hcpriv = u132;
+	endp->udev_number = address;
+	endp->usb_addr = usb_addr;
+	endp->usb_endp = usb_endp;
+	endp->queue_size = 1;
+	endp->queue_last = 0;
+	endp->queue_next = 0;
+	endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb;
+	spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+	u132_endp_queue_work(u132, endp, 0);
+	return 0;
+}
+
+static int queue_bulk_on_old_endpoint(struct u132 *u132, struct u132_udev *udev,
+	struct urb *urb,
+	struct usb_device *usb_dev, struct u132_endp *endp, u8 usb_addr,
+	u8 usb_endp, u8 address)
+{
+	urb->hcpriv = u132;
+	if (endp->queue_size++ < ENDP_QUEUE_SIZE) {
+		endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb;
+	} else {
+		struct u132_urbq *urbq = kmalloc(sizeof(struct u132_urbq),
+			GFP_ATOMIC);
+		if (urbq == NULL) {
+			endp->queue_size -= 1;
+			return -ENOMEM;
+		} else {
+			list_add_tail(&urbq->urb_more, &endp->urb_more);
+			urbq->urb = urb;
+		}
+	}
+	return 0;
+}
+
+static int create_endpoint_and_queue_control(struct u132 *u132,
+	struct urb *urb,
+	struct usb_device *usb_dev, u8 usb_addr, u8 usb_endp,
+	gfp_t mem_flags)
+{
+	struct u132_ring *ring;
+	unsigned long irqs;
+	int rc;
+	u8 endp_number;
+	struct u132_endp *endp = kmalloc(sizeof(struct u132_endp), mem_flags);
+
+	if (!endp)
+		return -ENOMEM;
+
+	spin_lock_init(&endp->queue_lock.slock);
+	spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+	rc = usb_hcd_link_urb_to_ep(u132_to_hcd(u132), urb);
+	if (rc) {
+		spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+		kfree(endp);
+		return rc;
+	}
+
+	endp_number = ++u132->num_endpoints;
+	urb->ep->hcpriv = u132->endp[endp_number - 1] = endp;
+	INIT_DELAYED_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler);
+	INIT_LIST_HEAD(&endp->urb_more);
+	ring = endp->ring = &u132->ring[0];
+	if (ring->curr_endp) {
+		list_add_tail(&endp->endp_ring, &ring->curr_endp->endp_ring);
+	} else {
+		INIT_LIST_HEAD(&endp->endp_ring);
+		ring->curr_endp = endp;
+	}
+	ring->length += 1;
+	endp->dequeueing = 0;
+	endp->edset_flush = 0;
+	endp->active = 0;
+	endp->delayed = 0;
+	endp->endp_number = endp_number;
+	endp->u132 = u132;
+	endp->hep = urb->ep;
+	u132_endp_init_kref(u132, endp);
+	u132_endp_get_kref(u132, endp);
+	if (usb_addr == 0) {
+		u8 address = u132->addr[usb_addr].address;
+		struct u132_udev *udev = &u132->udev[address];
+		endp->udev_number = address;
+		endp->usb_addr = usb_addr;
+		endp->usb_endp = usb_endp;
+		endp->input = 1;
+		endp->output = 1;
+		endp->pipetype = usb_pipetype(urb->pipe);
+		u132_udev_init_kref(u132, udev);
+		u132_udev_get_kref(u132, udev);
+		udev->endp_number_in[usb_endp] = endp_number;
+		udev->endp_number_out[usb_endp] = endp_number;
+		urb->hcpriv = u132;
+		endp->queue_size = 1;
+		endp->queue_last = 0;
+		endp->queue_next = 0;
+		endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb;
+		spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+		u132_endp_queue_work(u132, endp, 0);
+		return 0;
+	} else {		/*(usb_addr > 0) */
+		u8 address = u132->addr[usb_addr].address;
+		struct u132_udev *udev = &u132->udev[address];
+		endp->udev_number = address;
+		endp->usb_addr = usb_addr;
+		endp->usb_endp = usb_endp;
+		endp->input = 1;
+		endp->output = 1;
+		endp->pipetype = usb_pipetype(urb->pipe);
+		u132_udev_get_kref(u132, udev);
+		udev->enumeration = 2;
+		udev->endp_number_in[usb_endp] = endp_number;
+		udev->endp_number_out[usb_endp] = endp_number;
+		urb->hcpriv = u132;
+		endp->queue_size = 1;
+		endp->queue_last = 0;
+		endp->queue_next = 0;
+		endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb;
+		spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+		u132_endp_queue_work(u132, endp, 0);
+		return 0;
+	}
+}
+
+static int queue_control_on_old_endpoint(struct u132 *u132,
+	struct urb *urb,
+	struct usb_device *usb_dev, struct u132_endp *endp, u8 usb_addr,
+	u8 usb_endp)
+{
+	if (usb_addr == 0) {
+		if (usb_pipein(urb->pipe)) {
+			urb->hcpriv = u132;
+			if (endp->queue_size++ < ENDP_QUEUE_SIZE) {
+				endp->urb_list[ENDP_QUEUE_MASK &
+					endp->queue_last++] = urb;
+			} else {
+				struct u132_urbq *urbq =
+					kmalloc(sizeof(struct u132_urbq),
+					GFP_ATOMIC);
+				if (urbq == NULL) {
+					endp->queue_size -= 1;
+					return -ENOMEM;
+				} else {
+					list_add_tail(&urbq->urb_more,
+						&endp->urb_more);
+					urbq->urb = urb;
+				}
+			}
+			return 0;
+		} else {	/* usb_pipeout(urb->pipe) */
+			struct u132_addr *addr = &u132->addr[usb_dev->devnum];
+			int I = MAX_U132_UDEVS;
+			int i = 0;
+			while (--I > 0) {
+				struct u132_udev *udev = &u132->udev[++i];
+				if (udev->usb_device) {
+					continue;
+				} else {
+					udev->enumeration = 1;
+					u132->addr[0].address = i;
+					endp->udev_number = i;
+					udev->udev_number = i;
+					udev->usb_addr = usb_dev->devnum;
+					u132_udev_init_kref(u132, udev);
+					udev->endp_number_in[usb_endp] =
+						endp->endp_number;
+					u132_udev_get_kref(u132, udev);
+					udev->endp_number_out[usb_endp] =
+						endp->endp_number;
+					udev->usb_device = usb_dev;
+					((u8 *) (urb->setup_packet))[2] =
+						addr->address = i;
+					u132_udev_get_kref(u132, udev);
+					break;
+				}
+			}
+			if (I == 0) {
+				dev_err(&u132->platform_dev->dev, "run out of d"
+					"evice space\n");
+				return -EINVAL;
+			}
+			urb->hcpriv = u132;
+			if (endp->queue_size++ < ENDP_QUEUE_SIZE) {
+				endp->urb_list[ENDP_QUEUE_MASK &
+					endp->queue_last++] = urb;
+			} else {
+				struct u132_urbq *urbq =
+					kmalloc(sizeof(struct u132_urbq),
+					GFP_ATOMIC);
+				if (urbq == NULL) {
+					endp->queue_size -= 1;
+					return -ENOMEM;
+				} else {
+					list_add_tail(&urbq->urb_more,
+						&endp->urb_more);
+					urbq->urb = urb;
+				}
+			}
+			return 0;
+		}
+	} else {		/*(usb_addr > 0) */
+		u8 address = u132->addr[usb_addr].address;
+		struct u132_udev *udev = &u132->udev[address];
+		urb->hcpriv = u132;
+		if (udev->enumeration != 2)
+			udev->enumeration = 2;
+		if (endp->queue_size++ < ENDP_QUEUE_SIZE) {
+			endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] =
+				urb;
+		} else {
+			struct u132_urbq *urbq =
+				kmalloc(sizeof(struct u132_urbq), GFP_ATOMIC);
+			if (urbq == NULL) {
+				endp->queue_size -= 1;
+				return -ENOMEM;
+			} else {
+				list_add_tail(&urbq->urb_more, &endp->urb_more);
+				urbq->urb = urb;
+			}
+		}
+		return 0;
+	}
+}
+
+static int u132_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+		gfp_t mem_flags)
+{
+	struct u132 *u132 = hcd_to_u132(hcd);
+	if (irqs_disabled()) {
+		if (gfpflags_allow_blocking(mem_flags)) {
+			printk(KERN_ERR "invalid context for function that might sleep\n");
+			return -EINVAL;
+		}
+	}
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		return -ENODEV;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed "
+				"urb=%p\n", urb);
+		return -ESHUTDOWN;
+	} else {
+		u8 usb_addr = usb_pipedevice(urb->pipe);
+		u8 usb_endp = usb_pipeendpoint(urb->pipe);
+		struct usb_device *usb_dev = urb->dev;
+		if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
+			u8 address = u132->addr[usb_addr].address;
+			struct u132_udev *udev = &u132->udev[address];
+			struct u132_endp *endp = urb->ep->hcpriv;
+			urb->actual_length = 0;
+			if (endp) {
+				unsigned long irqs;
+				int retval;
+				spin_lock_irqsave(&endp->queue_lock.slock,
+					irqs);
+				retval = usb_hcd_link_urb_to_ep(hcd, urb);
+				if (retval == 0) {
+					retval = queue_int_on_old_endpoint(
+							u132, udev, urb,
+							usb_dev, endp,
+							usb_addr, usb_endp,
+							address);
+					if (retval)
+						usb_hcd_unlink_urb_from_ep(
+	hcd, urb);
+				}
+				spin_unlock_irqrestore(&endp->queue_lock.slock,
+					irqs);
+				if (retval) {
+					return retval;
+				} else {
+					u132_endp_queue_work(u132, endp,
+						msecs_to_jiffies(urb->interval))
+						;
+					return 0;
+				}
+			} else if (u132->num_endpoints == MAX_U132_ENDPS) {
+				return -EINVAL;
+			} else {	/*(endp == NULL) */
+				return create_endpoint_and_queue_int(u132, udev,
+						urb, usb_dev, usb_addr,
+						usb_endp, address, mem_flags);
+			}
+		} else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+			dev_err(&u132->platform_dev->dev, "the hardware does no"
+				"t support PIPE_ISOCHRONOUS\n");
+			return -EINVAL;
+		} else if (usb_pipetype(urb->pipe) == PIPE_BULK) {
+			u8 address = u132->addr[usb_addr].address;
+			struct u132_udev *udev = &u132->udev[address];
+			struct u132_endp *endp = urb->ep->hcpriv;
+			urb->actual_length = 0;
+			if (endp) {
+				unsigned long irqs;
+				int retval;
+				spin_lock_irqsave(&endp->queue_lock.slock,
+					irqs);
+				retval = usb_hcd_link_urb_to_ep(hcd, urb);
+				if (retval == 0) {
+					retval = queue_bulk_on_old_endpoint(
+							u132, udev, urb,
+							usb_dev, endp,
+							usb_addr, usb_endp,
+							address);
+					if (retval)
+						usb_hcd_unlink_urb_from_ep(
+	hcd, urb);
+				}
+				spin_unlock_irqrestore(&endp->queue_lock.slock,
+					irqs);
+				if (retval) {
+					return retval;
+				} else {
+					u132_endp_queue_work(u132, endp, 0);
+					return 0;
+				}
+			} else if (u132->num_endpoints == MAX_U132_ENDPS) {
+				return -EINVAL;
+			} else
+				return create_endpoint_and_queue_bulk(u132,
+					udev, urb, usb_dev, usb_addr,
+					usb_endp, address, mem_flags);
+		} else {
+			struct u132_endp *endp = urb->ep->hcpriv;
+			u16 urb_size = 8;
+			u8 *b = urb->setup_packet;
+			int i = 0;
+			char data[30 * 3 + 4];
+			char *d = data;
+			int m = (sizeof(data) - 1) / 3;
+			int l = 0;
+			data[0] = 0;
+			while (urb_size-- > 0) {
+				if (i > m) {
+				} else if (i++ < m) {
+					int w = sprintf(d, " %02X", *b++);
+					d += w;
+					l += w;
+				} else
+					d += sprintf(d, " ..");
+			}
+			if (endp) {
+				unsigned long irqs;
+				int retval;
+				spin_lock_irqsave(&endp->queue_lock.slock,
+					irqs);
+				retval = usb_hcd_link_urb_to_ep(hcd, urb);
+				if (retval == 0) {
+					retval = queue_control_on_old_endpoint(
+							u132, urb, usb_dev,
+							endp, usb_addr,
+							usb_endp);
+					if (retval)
+						usb_hcd_unlink_urb_from_ep(
+								hcd, urb);
+				}
+				spin_unlock_irqrestore(&endp->queue_lock.slock,
+					irqs);
+				if (retval) {
+					return retval;
+				} else {
+					u132_endp_queue_work(u132, endp, 0);
+					return 0;
+				}
+			} else if (u132->num_endpoints == MAX_U132_ENDPS) {
+				return -EINVAL;
+			} else
+				return create_endpoint_and_queue_control(u132,
+					urb, usb_dev, usb_addr, usb_endp,
+					mem_flags);
+		}
+	}
+}
+
+static int dequeue_from_overflow_chain(struct u132 *u132,
+	struct u132_endp *endp, struct urb *urb)
+{
+	struct u132_urbq *urbq;
+
+	list_for_each_entry(urbq, &endp->urb_more, urb_more) {
+		if (urbq->urb == urb) {
+			struct usb_hcd *hcd = u132_to_hcd(u132);
+			list_del(&urbq->urb_more);
+			endp->queue_size -= 1;
+			urb->error_count = 0;
+			usb_hcd_giveback_urb(hcd, urb, 0);
+			return 0;
+		}
+	}
+	dev_err(&u132->platform_dev->dev, "urb=%p not found in endp[%d]=%p ring"
+		"[%d] %c%c usb_endp=%d usb_addr=%d size=%d next=%04X last=%04X"
+		"\n", urb, endp->endp_number, endp, endp->ring->number,
+		endp->input ? 'I' : ' ', endp->output ? 'O' : ' ',
+		endp->usb_endp, endp->usb_addr, endp->queue_size,
+		endp->queue_next, endp->queue_last);
+	return -EINVAL;
+}
+
+static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp,
+		struct urb *urb, int status)
+{
+	unsigned long irqs;
+	int rc;
+
+	spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+	rc = usb_hcd_check_unlink_urb(u132_to_hcd(u132), urb, status);
+	if (rc) {
+		spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+		return rc;
+	}
+	if (endp->queue_size == 0) {
+		dev_err(&u132->platform_dev->dev, "urb=%p not found in endp[%d]"
+			"=%p ring[%d] %c%c usb_endp=%d usb_addr=%d\n", urb,
+			endp->endp_number, endp, endp->ring->number,
+			endp->input ? 'I' : ' ', endp->output ? 'O' : ' ',
+			endp->usb_endp, endp->usb_addr);
+		spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+		return -EINVAL;
+	}
+	if (urb == endp->urb_list[ENDP_QUEUE_MASK & endp->queue_next]) {
+		if (endp->active) {
+			endp->dequeueing = 1;
+			endp->edset_flush = 1;
+			u132_endp_queue_work(u132, endp, 0);
+			spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+			return 0;
+		} else {
+			spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+			u132_hcd_abandon_urb(u132, endp, urb, status);
+			return 0;
+		}
+	} else {
+		u16 queue_list = 0;
+		u16 queue_size = endp->queue_size;
+		u16 queue_scan = endp->queue_next;
+		struct urb **urb_slot = NULL;
+		while (++queue_list < ENDP_QUEUE_SIZE && --queue_size > 0) {
+			if (urb == endp->urb_list[ENDP_QUEUE_MASK &
+				++queue_scan]) {
+				urb_slot = &endp->urb_list[ENDP_QUEUE_MASK &
+					queue_scan];
+				break;
+			}
+		}
+		while (++queue_list < ENDP_QUEUE_SIZE && --queue_size > 0) {
+			*urb_slot = endp->urb_list[ENDP_QUEUE_MASK &
+				++queue_scan];
+			urb_slot = &endp->urb_list[ENDP_QUEUE_MASK &
+				queue_scan];
+		}
+		if (urb_slot) {
+			struct usb_hcd *hcd = u132_to_hcd(u132);
+
+			usb_hcd_unlink_urb_from_ep(hcd, urb);
+			endp->queue_size -= 1;
+			if (list_empty(&endp->urb_more)) {
+				spin_unlock_irqrestore(&endp->queue_lock.slock,
+					irqs);
+			} else {
+				struct list_head *next = endp->urb_more.next;
+				struct u132_urbq *urbq = list_entry(next,
+					struct u132_urbq, urb_more);
+				list_del(next);
+				*urb_slot = urbq->urb;
+				spin_unlock_irqrestore(&endp->queue_lock.slock,
+					irqs);
+				kfree(urbq);
+			}
+			urb->error_count = 0;
+			usb_hcd_giveback_urb(hcd, urb, status);
+			return 0;
+		} else if (list_empty(&endp->urb_more)) {
+			dev_err(&u132->platform_dev->dev, "urb=%p not found in "
+				"endp[%d]=%p ring[%d] %c%c usb_endp=%d usb_addr"
+				"=%d size=%d next=%04X last=%04X\n", urb,
+				endp->endp_number, endp, endp->ring->number,
+				endp->input ? 'I' : ' ',
+				endp->output ? 'O' : ' ', endp->usb_endp,
+				endp->usb_addr, endp->queue_size,
+				endp->queue_next, endp->queue_last);
+			spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+			return -EINVAL;
+		} else {
+			int retval;
+
+			usb_hcd_unlink_urb_from_ep(u132_to_hcd(u132), urb);
+			retval = dequeue_from_overflow_chain(u132, endp,
+				urb);
+			spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+			return retval;
+		}
+	}
+}
+
+static int u132_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct u132 *u132 = hcd_to_u132(hcd);
+	if (u132->going > 2) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		return -ENODEV;
+	} else {
+		u8 usb_addr = usb_pipedevice(urb->pipe);
+		u8 usb_endp = usb_pipeendpoint(urb->pipe);
+		u8 address = u132->addr[usb_addr].address;
+		struct u132_udev *udev = &u132->udev[address];
+		if (usb_pipein(urb->pipe)) {
+			u8 endp_number = udev->endp_number_in[usb_endp];
+			struct u132_endp *endp = u132->endp[endp_number - 1];
+			return u132_endp_urb_dequeue(u132, endp, urb, status);
+		} else {
+			u8 endp_number = udev->endp_number_out[usb_endp];
+			struct u132_endp *endp = u132->endp[endp_number - 1];
+			return u132_endp_urb_dequeue(u132, endp, urb, status);
+		}
+	}
+}
+
+static void u132_endpoint_disable(struct usb_hcd *hcd,
+	struct usb_host_endpoint *hep)
+{
+	struct u132 *u132 = hcd_to_u132(hcd);
+	if (u132->going > 2) {
+		dev_err(&u132->platform_dev->dev, "u132 device %p(hcd=%p hep=%p"
+			") has been removed %d\n", u132, hcd, hep,
+			u132->going);
+	} else {
+		struct u132_endp *endp = hep->hcpriv;
+		if (endp)
+			u132_endp_put_kref(u132, endp);
+	}
+}
+
+static int u132_get_frame(struct usb_hcd *hcd)
+{
+	struct u132 *u132 = hcd_to_u132(hcd);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		return -ENODEV;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed\n");
+		return -ESHUTDOWN;
+	} else {
+		dev_err(&u132->platform_dev->dev, "TODO: u132_get_frame\n");
+		mdelay(100);
+		return 0;
+	}
+}
+
+static int u132_roothub_descriptor(struct u132 *u132,
+	struct usb_hub_descriptor *desc)
+{
+	int retval;
+	u16 temp;
+	u32 rh_a = -1;
+	u32 rh_b = -1;
+	retval = u132_read_pcimem(u132, roothub.a, &rh_a);
+	if (retval)
+		return retval;
+	desc->bDescriptorType = USB_DT_HUB;
+	desc->bPwrOn2PwrGood = (rh_a & RH_A_POTPGT) >> 24;
+	desc->bHubContrCurrent = 0;
+	desc->bNbrPorts = u132->num_ports;
+	temp = 1 + (u132->num_ports / 8);
+	desc->bDescLength = 7 + 2 * temp;
+	temp = HUB_CHAR_COMMON_LPSM | HUB_CHAR_COMMON_OCPM;
+	if (rh_a & RH_A_NPS)
+		temp |= HUB_CHAR_NO_LPSM;
+	if (rh_a & RH_A_PSM)
+		temp |= HUB_CHAR_INDV_PORT_LPSM;
+	if (rh_a & RH_A_NOCP)
+		temp |= HUB_CHAR_NO_OCPM;
+	else if (rh_a & RH_A_OCPM)
+		temp |= HUB_CHAR_INDV_PORT_OCPM;
+	desc->wHubCharacteristics = cpu_to_le16(temp);
+	retval = u132_read_pcimem(u132, roothub.b, &rh_b);
+	if (retval)
+		return retval;
+	memset(desc->u.hs.DeviceRemovable, 0xff,
+			sizeof(desc->u.hs.DeviceRemovable));
+	desc->u.hs.DeviceRemovable[0] = rh_b & RH_B_DR;
+	if (u132->num_ports > 7) {
+		desc->u.hs.DeviceRemovable[1] = (rh_b & RH_B_DR) >> 8;
+		desc->u.hs.DeviceRemovable[2] = 0xff;
+	} else
+		desc->u.hs.DeviceRemovable[1] = 0xff;
+	return 0;
+}
+
+static int u132_roothub_status(struct u132 *u132, __le32 *desc)
+{
+	u32 rh_status = -1;
+	int ret_status = u132_read_pcimem(u132, roothub.status, &rh_status);
+	*desc = cpu_to_le32(rh_status);
+	return ret_status;
+}
+
+static int u132_roothub_portstatus(struct u132 *u132, __le32 *desc, u16 wIndex)
+{
+	if (wIndex == 0 || wIndex > u132->num_ports) {
+		return -EINVAL;
+	} else {
+		int port = wIndex - 1;
+		u32 rh_portstatus = -1;
+		int ret_portstatus = u132_read_pcimem(u132,
+			roothub.portstatus[port], &rh_portstatus);
+		*desc = cpu_to_le32(rh_portstatus);
+		if (*(u16 *) (desc + 2)) {
+			dev_info(&u132->platform_dev->dev, "Port %d Status Chan"
+				"ge = %08X\n", port, *desc);
+		}
+		return ret_portstatus;
+	}
+}
+
+
+/* this timer value might be vendor-specific ... */
+#define PORT_RESET_HW_MSEC 10
+#define PORT_RESET_MSEC 10
+/* wrap-aware logic morphed from <linux/jiffies.h> */
+#define tick_before(t1, t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
+static int u132_roothub_portreset(struct u132 *u132, int port_index)
+{
+	int retval;
+	u32 fmnumber;
+	u16 now;
+	u16 reset_done;
+	retval = u132_read_pcimem(u132, fmnumber, &fmnumber);
+	if (retval)
+		return retval;
+	now = fmnumber;
+	reset_done = now + PORT_RESET_MSEC;
+	do {
+		u32 portstat;
+		do {
+			retval = u132_read_pcimem(u132,
+				roothub.portstatus[port_index], &portstat);
+			if (retval)
+				return retval;
+			if (RH_PS_PRS & portstat)
+				continue;
+			else
+				break;
+		} while (tick_before(now, reset_done));
+		if (RH_PS_PRS & portstat)
+			return -ENODEV;
+		if (RH_PS_CCS & portstat) {
+			if (RH_PS_PRSC & portstat) {
+				retval = u132_write_pcimem(u132,
+					roothub.portstatus[port_index],
+					RH_PS_PRSC);
+				if (retval)
+					return retval;
+			}
+		} else
+			break;	/* start the next reset,
+				sleep till it's probably done */
+		retval = u132_write_pcimem(u132, roothub.portstatus[port_index],
+			 RH_PS_PRS);
+		if (retval)
+			return retval;
+		msleep(PORT_RESET_HW_MSEC);
+		retval = u132_read_pcimem(u132, fmnumber, &fmnumber);
+		if (retval)
+			return retval;
+		now = fmnumber;
+	} while (tick_before(now, reset_done));
+	return 0;
+}
+
+static int u132_roothub_setportfeature(struct u132 *u132, u16 wValue,
+	u16 wIndex)
+{
+	if (wIndex == 0 || wIndex > u132->num_ports) {
+		return -EINVAL;
+	} else {
+		int port_index = wIndex - 1;
+		struct u132_port *port = &u132->port[port_index];
+		port->Status &= ~(1 << wValue);
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			return u132_write_pcimem(u132,
+			       roothub.portstatus[port_index], RH_PS_PSS);
+		case USB_PORT_FEAT_POWER:
+			return u132_write_pcimem(u132,
+			       roothub.portstatus[port_index], RH_PS_PPS);
+		case USB_PORT_FEAT_RESET:
+			return u132_roothub_portreset(u132, port_index);
+		default:
+			return -EPIPE;
+		}
+	}
+}
+
+static int u132_roothub_clearportfeature(struct u132 *u132, u16 wValue,
+	u16 wIndex)
+{
+	if (wIndex == 0 || wIndex > u132->num_ports) {
+		return -EINVAL;
+	} else {
+		int port_index = wIndex - 1;
+		u32 temp;
+		struct u132_port *port = &u132->port[port_index];
+		port->Status &= ~(1 << wValue);
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			temp = RH_PS_CCS;
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			temp = RH_PS_PESC;
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			temp = RH_PS_POCI;
+			if ((u132->hc_control & OHCI_CTRL_HCFS)
+				!= OHCI_USB_OPER) {
+				dev_err(&u132->platform_dev->dev, "TODO resume_"
+					"root_hub\n");
+			}
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			temp = RH_PS_PSSC;
+			break;
+		case USB_PORT_FEAT_POWER:
+			temp = RH_PS_LSDA;
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			temp = RH_PS_CSC;
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			temp = RH_PS_OCIC;
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			temp = RH_PS_PRSC;
+			break;
+		default:
+			return -EPIPE;
+		}
+		return u132_write_pcimem(u132, roothub.portstatus[port_index],
+		       temp);
+	}
+}
+
+
+/* the virtual root hub timer IRQ checks for hub status*/
+static int u132_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct u132 *u132 = hcd_to_u132(hcd);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device hcd=%p has been remov"
+			"ed %d\n", hcd, u132->going);
+		return -ENODEV;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov"
+			"ed\n", hcd);
+		return -ESHUTDOWN;
+	} else {
+		int i, changed = 0, length = 1;
+		if (u132->flags & OHCI_QUIRK_AMD756) {
+			if ((u132->hc_roothub_a & RH_A_NDP) > MAX_ROOT_PORTS) {
+				dev_err(&u132->platform_dev->dev, "bogus NDP, r"
+					"ereads as NDP=%d\n",
+					u132->hc_roothub_a & RH_A_NDP);
+				goto done;
+			}
+		}
+		if (u132->hc_roothub_status & (RH_HS_LPSC | RH_HS_OCIC))
+			buf[0] = changed = 1;
+		else
+			buf[0] = 0;
+		if (u132->num_ports > 7) {
+			buf[1] = 0;
+			length++;
+		}
+		for (i = 0; i < u132->num_ports; i++) {
+			if (u132->hc_roothub_portstatus[i] & (RH_PS_CSC |
+				RH_PS_PESC | RH_PS_PSSC | RH_PS_OCIC |
+				RH_PS_PRSC)) {
+				changed = 1;
+				if (i < 7)
+					buf[0] |= 1 << (i + 1);
+				else
+					buf[1] |= 1 << (i - 7);
+				continue;
+			}
+			if (!(u132->hc_roothub_portstatus[i] & RH_PS_CCS))
+				continue;
+
+			if ((u132->hc_roothub_portstatus[i] & RH_PS_PSS))
+				continue;
+		}
+done:
+		return changed ? length : 0;
+	}
+}
+
+static int u132_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+	u16 wIndex, char *buf, u16 wLength)
+{
+	struct u132 *u132 = hcd_to_u132(hcd);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		return -ENODEV;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed\n");
+		return -ESHUTDOWN;
+	} else {
+		int retval = 0;
+		mutex_lock(&u132->sw_lock);
+		switch (typeReq) {
+		case ClearHubFeature:
+			switch (wValue) {
+			case C_HUB_OVER_CURRENT:
+			case C_HUB_LOCAL_POWER:
+				break;
+			default:
+				goto stall;
+			}
+			break;
+		case SetHubFeature:
+			switch (wValue) {
+			case C_HUB_OVER_CURRENT:
+			case C_HUB_LOCAL_POWER:
+				break;
+			default:
+				goto stall;
+			}
+			break;
+		case ClearPortFeature:{
+				retval = u132_roothub_clearportfeature(u132,
+					wValue, wIndex);
+				if (retval)
+					goto error;
+				break;
+			}
+		case GetHubDescriptor:{
+				retval = u132_roothub_descriptor(u132,
+					(struct usb_hub_descriptor *)buf);
+				if (retval)
+					goto error;
+				break;
+			}
+		case GetHubStatus:{
+				retval = u132_roothub_status(u132,
+					(__le32 *) buf);
+				if (retval)
+					goto error;
+				break;
+			}
+		case GetPortStatus:{
+				retval = u132_roothub_portstatus(u132,
+					(__le32 *) buf, wIndex);
+				if (retval)
+					goto error;
+				break;
+			}
+		case SetPortFeature:{
+				retval = u132_roothub_setportfeature(u132,
+					wValue, wIndex);
+				if (retval)
+					goto error;
+				break;
+			}
+		default:
+			goto stall;
+		error:
+			u132_disable(u132);
+			u132->going = 1;
+			break;
+		stall:
+			retval = -EPIPE;
+			break;
+		}
+		mutex_unlock(&u132->sw_lock);
+		return retval;
+	}
+}
+
+static int u132_start_port_reset(struct usb_hcd *hcd, unsigned port_num)
+{
+	struct u132 *u132 = hcd_to_u132(hcd);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		return -ENODEV;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed\n");
+		return -ESHUTDOWN;
+	} else
+		return 0;
+}
+
+
+#ifdef CONFIG_PM
+static int u132_bus_suspend(struct usb_hcd *hcd)
+{
+	struct u132 *u132 = hcd_to_u132(hcd);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		return -ENODEV;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed\n");
+		return -ESHUTDOWN;
+	} else
+		return 0;
+}
+
+static int u132_bus_resume(struct usb_hcd *hcd)
+{
+	struct u132 *u132 = hcd_to_u132(hcd);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		return -ENODEV;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed\n");
+		return -ESHUTDOWN;
+	} else
+		return 0;
+}
+
+#else
+#define u132_bus_suspend NULL
+#define u132_bus_resume NULL
+#endif
+static const struct hc_driver u132_hc_driver = {
+	.description = hcd_name,
+	.hcd_priv_size = sizeof(struct u132),
+	.irq = NULL,
+	.flags = HCD_USB11 | HCD_MEMORY,
+	.reset = u132_hcd_reset,
+	.start = u132_hcd_start,
+	.stop = u132_hcd_stop,
+	.urb_enqueue = u132_urb_enqueue,
+	.urb_dequeue = u132_urb_dequeue,
+	.endpoint_disable = u132_endpoint_disable,
+	.get_frame_number = u132_get_frame,
+	.hub_status_data = u132_hub_status_data,
+	.hub_control = u132_hub_control,
+	.bus_suspend = u132_bus_suspend,
+	.bus_resume = u132_bus_resume,
+	.start_port_reset = u132_start_port_reset,
+};
+
+/*
+* This function may be called by the USB core whilst the "usb_all_devices_rwsem"
+* is held for writing, thus this module must not call usb_remove_hcd()
+* synchronously - but instead should immediately stop activity to the
+* device and asynchronously call usb_remove_hcd()
+*/
+static int u132_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	if (hcd) {
+		struct u132 *u132 = hcd_to_u132(hcd);
+		if (u132->going++ > 1) {
+			dev_err(&u132->platform_dev->dev, "already being remove"
+				"d\n");
+			return -ENODEV;
+		} else {
+			int rings = MAX_U132_RINGS;
+			int endps = MAX_U132_ENDPS;
+			dev_err(&u132->platform_dev->dev, "removing device u132"
+				".%d\n", u132->sequence_num);
+			msleep(100);
+			mutex_lock(&u132->sw_lock);
+			u132_monitor_cancel_work(u132);
+			while (rings-- > 0) {
+				struct u132_ring *ring = &u132->ring[rings];
+				u132_ring_cancel_work(u132, ring);
+			}
+			while (endps-- > 0) {
+				struct u132_endp *endp = u132->endp[endps];
+				if (endp)
+					u132_endp_cancel_work(u132, endp);
+			}
+			u132->going += 1;
+			printk(KERN_INFO "removing device u132.%d\n",
+				u132->sequence_num);
+			mutex_unlock(&u132->sw_lock);
+			usb_remove_hcd(hcd);
+			u132_u132_put_kref(u132);
+			return 0;
+		}
+	} else
+		return 0;
+}
+
+static void u132_initialise(struct u132 *u132, struct platform_device *pdev)
+{
+	int rings = MAX_U132_RINGS;
+	int ports = MAX_U132_PORTS;
+	int addrs = MAX_U132_ADDRS;
+	int udevs = MAX_U132_UDEVS;
+	int endps = MAX_U132_ENDPS;
+	u132->board = dev_get_platdata(&pdev->dev);
+	u132->platform_dev = pdev;
+	u132->power = 0;
+	u132->reset = 0;
+	mutex_init(&u132->sw_lock);
+	mutex_init(&u132->scheduler_lock);
+	while (rings-- > 0) {
+		struct u132_ring *ring = &u132->ring[rings];
+		ring->u132 = u132;
+		ring->number = rings + 1;
+		ring->length = 0;
+		ring->curr_endp = NULL;
+		INIT_DELAYED_WORK(&ring->scheduler,
+				  u132_hcd_ring_work_scheduler);
+	}
+	mutex_lock(&u132->sw_lock);
+	INIT_DELAYED_WORK(&u132->monitor, u132_hcd_monitor_work);
+	while (ports-- > 0) {
+		struct u132_port *port = &u132->port[ports];
+		port->u132 = u132;
+		port->reset = 0;
+		port->enable = 0;
+		port->power = 0;
+		port->Status = 0;
+	}
+	while (addrs-- > 0) {
+		struct u132_addr *addr = &u132->addr[addrs];
+		addr->address = 0;
+	}
+	while (udevs-- > 0) {
+		struct u132_udev *udev = &u132->udev[udevs];
+		int i = ARRAY_SIZE(udev->endp_number_in);
+		int o = ARRAY_SIZE(udev->endp_number_out);
+		udev->usb_device = NULL;
+		udev->udev_number = 0;
+		udev->usb_addr = 0;
+		udev->portnumber = 0;
+		while (i-- > 0)
+			udev->endp_number_in[i] = 0;
+
+		while (o-- > 0)
+			udev->endp_number_out[o] = 0;
+
+	}
+	while (endps-- > 0)
+		u132->endp[endps] = NULL;
+
+	mutex_unlock(&u132->sw_lock);
+}
+
+static int u132_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	int retval;
+	u32 control;
+	u32 rh_a = -1;
+
+	msleep(100);
+	if (u132_exiting > 0)
+		return -ENODEV;
+
+	retval = ftdi_write_pcimem(pdev, intrdisable, OHCI_INTR_MIE);
+	if (retval)
+		return retval;
+	retval = ftdi_read_pcimem(pdev, control, &control);
+	if (retval)
+		return retval;
+	retval = ftdi_read_pcimem(pdev, roothub.a, &rh_a);
+	if (retval)
+		return retval;
+
+	hcd = usb_create_hcd(&u132_hc_driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		printk(KERN_ERR "failed to create the usb hcd struct for U132\n"
+			);
+		ftdi_elan_gone_away(pdev);
+		return -ENOMEM;
+	} else {
+		struct u132 *u132 = hcd_to_u132(hcd);
+		retval = 0;
+		hcd->rsrc_start = 0;
+		mutex_lock(&u132_module_lock);
+		u132->sequence_num = ++u132_instances;
+		mutex_unlock(&u132_module_lock);
+		u132_u132_init_kref(u132);
+		u132_initialise(u132, pdev);
+		hcd->product_desc = "ELAN U132 Host Controller";
+		retval = usb_add_hcd(hcd, 0, 0);
+		if (retval != 0) {
+			dev_err(&u132->platform_dev->dev, "init error %d\n",
+				retval);
+			u132_u132_put_kref(u132);
+			return retval;
+		} else {
+			device_wakeup_enable(hcd->self.controller);
+			u132_monitor_queue_work(u132, 100);
+			return 0;
+		}
+	}
+}
+
+
+#ifdef CONFIG_PM
+/*
+ * for this device there's no useful distinction between the controller
+ * and its root hub.
+ */
+static int u132_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct u132 *u132 = hcd_to_u132(hcd);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		return -ENODEV;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed\n");
+		return -ESHUTDOWN;
+	} else {
+		int retval = 0, ports;
+
+		switch (state.event) {
+		case PM_EVENT_FREEZE:
+			retval = u132_bus_suspend(hcd);
+			break;
+		case PM_EVENT_SUSPEND:
+		case PM_EVENT_HIBERNATE:
+			ports = MAX_U132_PORTS;
+			while (ports-- > 0) {
+				port_power(u132, ports, 0);
+			}
+			break;
+		}
+		return retval;
+	}
+}
+
+static int u132_resume(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct u132 *u132 = hcd_to_u132(hcd);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+		return -ENODEV;
+	} else if (u132->going > 0) {
+		dev_err(&u132->platform_dev->dev, "device is being removed\n");
+		return -ESHUTDOWN;
+	} else {
+		int retval = 0;
+		if (!u132->port[0].power) {
+			int ports = MAX_U132_PORTS;
+			while (ports-- > 0) {
+				port_power(u132, ports, 1);
+			}
+			retval = 0;
+		} else {
+			retval = u132_bus_resume(hcd);
+		}
+		return retval;
+	}
+}
+
+#else
+#define u132_suspend NULL
+#define u132_resume NULL
+#endif
+/*
+* this driver is loaded explicitly by ftdi_u132
+*
+* the platform_driver struct is static because it is per type of module
+*/
+static struct platform_driver u132_platform_driver = {
+	.probe = u132_probe,
+	.remove = u132_remove,
+	.suspend = u132_suspend,
+	.resume = u132_resume,
+	.driver = {
+		   .name = hcd_name,
+		   },
+};
+static int __init u132_hcd_init(void)
+{
+	int retval;
+	u132_instances = 0;
+	u132_exiting = 0;
+	if (usb_disabled())
+		return -ENODEV;
+	workqueue = create_singlethread_workqueue("u132");
+	if (!workqueue)
+		return -ENOMEM;
+	retval = platform_driver_register(&u132_platform_driver);
+	if (retval)
+		destroy_workqueue(workqueue);
+
+	return retval;
+}
+
+
+module_init(u132_hcd_init);
+static void __exit u132_hcd_exit(void)
+{
+	mutex_lock(&u132_module_lock);
+	u132_exiting += 1;
+	mutex_unlock(&u132_module_lock);
+	platform_driver_unregister(&u132_platform_driver);
+	printk(KERN_INFO "u132-hcd driver deregistered\n");
+	wait_event(u132_hcd_wait, u132_instances == 0);
+	destroy_workqueue(workqueue);
+}
+
+
+module_exit(u132_hcd_exit);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:u132_hcd");
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
new file mode 100644
index 000000000..c4e67c4b5
--- /dev/null
+++ b/drivers/usb/host/uhci-debug.c
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * UHCI-specific debugging code. Invaluable when something
+ * goes wrong, but don't get in my face.
+ *
+ * Kernel visible pointers are surrounded in []s and bus
+ * visible pointers are surrounded in ()s
+ *
+ * (C) Copyright 1999 Linus Torvalds
+ * (C) Copyright 1999-2001 Johannes Erdfelt
+ */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/debugfs.h>
+#include <asm/io.h>
+
+#include "uhci-hcd.h"
+
+#define EXTRA_SPACE	1024
+
+static struct dentry *uhci_debugfs_root;
+
+#ifdef CONFIG_DYNAMIC_DEBUG
+
+/* Handle REALLY large printks so we don't overflow buffers */
+static void lprintk(char *buf)
+{
+	char *p;
+
+	/* Just write one line at a time */
+	while (buf) {
+		p = strchr(buf, '\n');
+		if (p)
+			*p = 0;
+		printk(KERN_DEBUG "%s\n", buf);
+		buf = p;
+		if (buf)
+			buf++;
+	}
+}
+
+static int uhci_show_td(struct uhci_hcd *uhci, struct uhci_td *td, char *buf,
+			int len, int space)
+{
+	char *out = buf;
+	char *spid;
+	u32 status, token;
+
+	status = td_status(uhci, td);
+	out += sprintf(out, "%*s[%p] link (%08x) ", space, "", td,
+		hc32_to_cpu(uhci, td->link));
+	out += sprintf(out, "e%d %s%s%s%s%s%s%s%s%s%sLength=%x ",
+		((status >> 27) & 3),
+		(status & TD_CTRL_SPD) ?      "SPD " : "",
+		(status & TD_CTRL_LS) ?       "LS " : "",
+		(status & TD_CTRL_IOC) ?      "IOC " : "",
+		(status & TD_CTRL_ACTIVE) ?   "Active " : "",
+		(status & TD_CTRL_STALLED) ?  "Stalled " : "",
+		(status & TD_CTRL_DBUFERR) ?  "DataBufErr " : "",
+		(status & TD_CTRL_BABBLE) ?   "Babble " : "",
+		(status & TD_CTRL_NAK) ?      "NAK " : "",
+		(status & TD_CTRL_CRCTIMEO) ? "CRC/Timeo " : "",
+		(status & TD_CTRL_BITSTUFF) ? "BitStuff " : "",
+		status & 0x7ff);
+	if (out - buf > len)
+		goto done;
+
+	token = td_token(uhci, td);
+	switch (uhci_packetid(token)) {
+		case USB_PID_SETUP:
+			spid = "SETUP";
+			break;
+		case USB_PID_OUT:
+			spid = "OUT";
+			break;
+		case USB_PID_IN:
+			spid = "IN";
+			break;
+		default:
+			spid = "?";
+			break;
+	}
+
+	out += sprintf(out, "MaxLen=%x DT%d EndPt=%x Dev=%x, PID=%x(%s) ",
+		token >> 21,
+		((token >> 19) & 1),
+		(token >> 15) & 15,
+		(token >> 8) & 127,
+		(token & 0xff),
+		spid);
+	out += sprintf(out, "(buf=%08x)\n", hc32_to_cpu(uhci, td->buffer));
+
+done:
+	if (out - buf > len)
+		out += sprintf(out, " ...\n");
+	return out - buf;
+}
+
+static int uhci_show_urbp(struct uhci_hcd *uhci, struct urb_priv *urbp,
+			char *buf, int len, int space)
+{
+	char *out = buf;
+	struct uhci_td *td;
+	int i, nactive, ninactive;
+	char *ptype;
+
+
+	out += sprintf(out, "urb_priv [%p] ", urbp);
+	out += sprintf(out, "urb [%p] ", urbp->urb);
+	out += sprintf(out, "qh [%p] ", urbp->qh);
+	out += sprintf(out, "Dev=%d ", usb_pipedevice(urbp->urb->pipe));
+	out += sprintf(out, "EP=%x(%s) ", usb_pipeendpoint(urbp->urb->pipe),
+			(usb_pipein(urbp->urb->pipe) ? "IN" : "OUT"));
+	if (out - buf > len)
+		goto done;
+
+	switch (usb_pipetype(urbp->urb->pipe)) {
+	case PIPE_ISOCHRONOUS: ptype = "ISO"; break;
+	case PIPE_INTERRUPT: ptype = "INT"; break;
+	case PIPE_BULK: ptype = "BLK"; break;
+	default:
+	case PIPE_CONTROL: ptype = "CTL"; break;
+	}
+
+	out += sprintf(out, "%s%s", ptype, (urbp->fsbr ? " FSBR" : ""));
+	out += sprintf(out, " Actlen=%d%s", urbp->urb->actual_length,
+			(urbp->qh->type == USB_ENDPOINT_XFER_CONTROL ?
+				"-8" : ""));
+
+	if (urbp->urb->unlinked)
+		out += sprintf(out, " Unlinked=%d", urbp->urb->unlinked);
+	out += sprintf(out, "\n");
+
+	if (out - buf > len)
+		goto done;
+
+	i = nactive = ninactive = 0;
+	list_for_each_entry(td, &urbp->td_list, list) {
+		if (urbp->qh->type != USB_ENDPOINT_XFER_ISOC &&
+				(++i <= 10 || debug > 2)) {
+			out += sprintf(out, "%*s%d: ", space + 2, "", i);
+			out += uhci_show_td(uhci, td, out,
+					len - (out - buf), 0);
+			if (out - buf > len)
+				goto tail;
+		} else {
+			if (td_status(uhci, td) & TD_CTRL_ACTIVE)
+				++nactive;
+			else
+				++ninactive;
+		}
+	}
+	if (nactive + ninactive > 0)
+		out += sprintf(out,
+				"%*s[skipped %d inactive and %d active TDs]\n",
+				space, "", ninactive, nactive);
+done:
+	if (out - buf > len)
+		out += sprintf(out, " ...\n");
+tail:
+	return out - buf;
+}
+
+static int uhci_show_qh(struct uhci_hcd *uhci,
+		struct uhci_qh *qh, char *buf, int len, int space)
+{
+	char *out = buf;
+	int i, nurbs;
+	__hc32 element = qh_element(qh);
+	char *qtype;
+
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_ISOC: qtype = "ISO"; break;
+	case USB_ENDPOINT_XFER_INT: qtype = "INT"; break;
+	case USB_ENDPOINT_XFER_BULK: qtype = "BLK"; break;
+	case USB_ENDPOINT_XFER_CONTROL: qtype = "CTL"; break;
+	default: qtype = "Skel" ; break;
+	}
+
+	out += sprintf(out, "%*s[%p] %s QH link (%08x) element (%08x)\n",
+			space, "", qh, qtype,
+			hc32_to_cpu(uhci, qh->link),
+			hc32_to_cpu(uhci, element));
+	if (qh->type == USB_ENDPOINT_XFER_ISOC)
+		out += sprintf(out,
+				"%*s    period %d phase %d load %d us, frame %x desc [%p]\n",
+				space, "", qh->period, qh->phase, qh->load,
+				qh->iso_frame, qh->iso_packet_desc);
+	else if (qh->type == USB_ENDPOINT_XFER_INT)
+		out += sprintf(out, "%*s    period %d phase %d load %d us\n",
+				space, "", qh->period, qh->phase, qh->load);
+	if (out - buf > len)
+		goto done;
+
+	if (element & UHCI_PTR_QH(uhci))
+		out += sprintf(out, "%*s  Element points to QH (bug?)\n", space, "");
+
+	if (element & UHCI_PTR_DEPTH(uhci))
+		out += sprintf(out, "%*s  Depth traverse\n", space, "");
+
+	if (element & cpu_to_hc32(uhci, 8))
+		out += sprintf(out, "%*s  Bit 3 set (bug?)\n", space, "");
+
+	if (!(element & ~(UHCI_PTR_QH(uhci) | UHCI_PTR_DEPTH(uhci))))
+		out += sprintf(out, "%*s  Element is NULL (bug?)\n", space, "");
+
+	if (out - buf > len)
+		goto done;
+
+	if (list_empty(&qh->queue)) {
+		out += sprintf(out, "%*s  queue is empty\n", space, "");
+		if (qh == uhci->skel_async_qh) {
+			out += uhci_show_td(uhci, uhci->term_td, out,
+					len - (out - buf), 0);
+			if (out - buf > len)
+				goto tail;
+		}
+	} else {
+		struct urb_priv *urbp = list_entry(qh->queue.next,
+				struct urb_priv, node);
+		struct uhci_td *td = list_entry(urbp->td_list.next,
+				struct uhci_td, list);
+
+		if (element != LINK_TO_TD(uhci, td))
+			out += sprintf(out, "%*s Element != First TD\n",
+					space, "");
+		i = nurbs = 0;
+		list_for_each_entry(urbp, &qh->queue, node) {
+			if (++i <= 10) {
+				out += uhci_show_urbp(uhci, urbp, out,
+						len - (out - buf), space + 2);
+				if (out - buf > len)
+					goto tail;
+			}
+			else
+				++nurbs;
+		}
+		if (nurbs > 0)
+			out += sprintf(out, "%*s Skipped %d URBs\n",
+					space, "", nurbs);
+	}
+
+	if (out - buf > len)
+		goto done;
+
+	if (qh->dummy_td) {
+		out += sprintf(out, "%*s  Dummy TD\n", space, "");
+		out += uhci_show_td(uhci, qh->dummy_td, out,
+				len - (out - buf), 0);
+		if (out - buf > len)
+			goto tail;
+	}
+
+done:
+	if (out - buf > len)
+		out += sprintf(out, " ...\n");
+tail:
+	return out - buf;
+}
+
+static int uhci_show_sc(int port, unsigned short status, char *buf)
+{
+	return sprintf(buf, "  stat%d     =     %04x  %s%s%s%s%s%s%s%s%s%s\n",
+		port,
+		status,
+		(status & USBPORTSC_SUSP) ?	" Suspend" : "",
+		(status & USBPORTSC_OCC) ?	" OverCurrentChange" : "",
+		(status & USBPORTSC_OC) ?	" OverCurrent" : "",
+		(status & USBPORTSC_PR) ?	" Reset" : "",
+		(status & USBPORTSC_LSDA) ?	" LowSpeed" : "",
+		(status & USBPORTSC_RD) ?	" ResumeDetect" : "",
+		(status & USBPORTSC_PEC) ?	" EnableChange" : "",
+		(status & USBPORTSC_PE) ?	" Enabled" : "",
+		(status & USBPORTSC_CSC) ?	" ConnectChange" : "",
+		(status & USBPORTSC_CCS) ?	" Connected" : "");
+}
+
+static int uhci_show_root_hub_state(struct uhci_hcd *uhci, char *buf)
+{
+	char *rh_state;
+
+	switch (uhci->rh_state) {
+	    case UHCI_RH_RESET:
+		rh_state = "reset";		break;
+	    case UHCI_RH_SUSPENDED:
+		rh_state = "suspended";		break;
+	    case UHCI_RH_AUTO_STOPPED:
+		rh_state = "auto-stopped";	break;
+	    case UHCI_RH_RESUMING:
+		rh_state = "resuming";		break;
+	    case UHCI_RH_SUSPENDING:
+		rh_state = "suspending";	break;
+	    case UHCI_RH_RUNNING:
+		rh_state = "running";		break;
+	    case UHCI_RH_RUNNING_NODEVS:
+		rh_state = "running, no devs";	break;
+	    default:
+		rh_state = "?";			break;
+	}
+	return sprintf(buf, "Root-hub state: %s   FSBR: %d\n",
+			rh_state, uhci->fsbr_is_on);
+}
+
+static int uhci_show_status(struct uhci_hcd *uhci, char *buf, int len)
+{
+	char *out = buf;
+	unsigned short usbcmd, usbstat, usbint, usbfrnum;
+	unsigned int flbaseadd;
+	unsigned char sof;
+	unsigned short portsc1, portsc2;
+
+
+	usbcmd    = uhci_readw(uhci, USBCMD);
+	usbstat   = uhci_readw(uhci, USBSTS);
+	usbint    = uhci_readw(uhci, USBINTR);
+	usbfrnum  = uhci_readw(uhci, USBFRNUM);
+	flbaseadd = uhci_readl(uhci, USBFLBASEADD);
+	sof       = uhci_readb(uhci, USBSOF);
+	portsc1   = uhci_readw(uhci, USBPORTSC1);
+	portsc2   = uhci_readw(uhci, USBPORTSC2);
+
+	out += sprintf(out, "  usbcmd    =     %04x   %s%s%s%s%s%s%s%s\n",
+		usbcmd,
+		(usbcmd & USBCMD_MAXP) ?    "Maxp64 " : "Maxp32 ",
+		(usbcmd & USBCMD_CF) ?      "CF " : "",
+		(usbcmd & USBCMD_SWDBG) ?   "SWDBG " : "",
+		(usbcmd & USBCMD_FGR) ?     "FGR " : "",
+		(usbcmd & USBCMD_EGSM) ?    "EGSM " : "",
+		(usbcmd & USBCMD_GRESET) ?  "GRESET " : "",
+		(usbcmd & USBCMD_HCRESET) ? "HCRESET " : "",
+		(usbcmd & USBCMD_RS) ?      "RS " : "");
+	if (out - buf > len)
+		goto done;
+
+	out += sprintf(out, "  usbstat   =     %04x   %s%s%s%s%s%s\n",
+		usbstat,
+		(usbstat & USBSTS_HCH) ?    "HCHalted " : "",
+		(usbstat & USBSTS_HCPE) ?   "HostControllerProcessError " : "",
+		(usbstat & USBSTS_HSE) ?    "HostSystemError " : "",
+		(usbstat & USBSTS_RD) ?     "ResumeDetect " : "",
+		(usbstat & USBSTS_ERROR) ?  "USBError " : "",
+		(usbstat & USBSTS_USBINT) ? "USBINT " : "");
+	if (out - buf > len)
+		goto done;
+
+	out += sprintf(out, "  usbint    =     %04x\n", usbint);
+	out += sprintf(out, "  usbfrnum  =   (%d)%03x\n", (usbfrnum >> 10) & 1,
+		0xfff & (4*(unsigned int)usbfrnum));
+	out += sprintf(out, "  flbaseadd = %08x\n", flbaseadd);
+	out += sprintf(out, "  sof       =       %02x\n", sof);
+	if (out - buf > len)
+		goto done;
+
+	out += uhci_show_sc(1, portsc1, out);
+	if (out - buf > len)
+		goto done;
+
+	out += uhci_show_sc(2, portsc2, out);
+	if (out - buf > len)
+		goto done;
+
+	out += sprintf(out,
+			"Most recent frame: %x (%d)   Last ISO frame: %x (%d)\n",
+			uhci->frame_number, uhci->frame_number & 1023,
+			uhci->last_iso_frame, uhci->last_iso_frame & 1023);
+
+done:
+	if (out - buf > len)
+		out += sprintf(out, " ...\n");
+	return out - buf;
+}
+
+static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
+{
+	char *out = buf;
+	int i, j;
+	struct uhci_qh *qh;
+	struct uhci_td *td;
+	struct list_head *tmp, *head;
+	int nframes, nerrs;
+	__hc32 link;
+	__hc32 fsbr_link;
+
+	static const char * const qh_names[] = {
+		"unlink", "iso", "int128", "int64", "int32", "int16",
+		"int8", "int4", "int2", "async", "term"
+	};
+
+	out += uhci_show_root_hub_state(uhci, out);
+	if (out - buf > len)
+		goto done;
+	out += sprintf(out, "HC status\n");
+	out += uhci_show_status(uhci, out, len - (out - buf));
+	if (out - buf > len)
+		goto tail;
+
+	out += sprintf(out, "Periodic load table\n");
+	for (i = 0; i < MAX_PHASE; ++i) {
+		out += sprintf(out, "\t%d", uhci->load[i]);
+		if (i % 8 == 7)
+			*out++ = '\n';
+	}
+	out += sprintf(out, "Total: %d, #INT: %d, #ISO: %d\n",
+			uhci->total_load,
+			uhci_to_hcd(uhci)->self.bandwidth_int_reqs,
+			uhci_to_hcd(uhci)->self.bandwidth_isoc_reqs);
+	if (debug <= 1)
+		goto tail;
+
+	out += sprintf(out, "Frame List\n");
+	nframes = 10;
+	nerrs = 0;
+	for (i = 0; i < UHCI_NUMFRAMES; ++i) {
+		__hc32 qh_dma;
+
+		if (out - buf > len)
+			goto done;
+		j = 0;
+		td = uhci->frame_cpu[i];
+		link = uhci->frame[i];
+		if (!td)
+			goto check_link;
+
+		if (nframes > 0) {
+			out += sprintf(out, "- Frame %d -> (%08x)\n",
+					i, hc32_to_cpu(uhci, link));
+			j = 1;
+		}
+
+		head = &td->fl_list;
+		tmp = head;
+		do {
+			td = list_entry(tmp, struct uhci_td, fl_list);
+			tmp = tmp->next;
+			if (link != LINK_TO_TD(uhci, td)) {
+				if (nframes > 0) {
+					out += sprintf(out,
+						"    link does not match list entry!\n");
+					if (out - buf > len)
+						goto done;
+				} else
+					++nerrs;
+			}
+			if (nframes > 0) {
+				out += uhci_show_td(uhci, td, out,
+						len - (out - buf), 4);
+				if (out - buf > len)
+					goto tail;
+			}
+			link = td->link;
+		} while (tmp != head);
+
+check_link:
+		qh_dma = uhci_frame_skel_link(uhci, i);
+		if (link != qh_dma) {
+			if (nframes > 0) {
+				if (!j) {
+					out += sprintf(out,
+						"- Frame %d -> (%08x)\n",
+						i, hc32_to_cpu(uhci, link));
+					j = 1;
+				}
+				out += sprintf(out,
+					"   link does not match QH (%08x)!\n",
+					hc32_to_cpu(uhci, qh_dma));
+				if (out - buf > len)
+					goto done;
+			} else
+				++nerrs;
+		}
+		nframes -= j;
+	}
+	if (nerrs > 0)
+		out += sprintf(out, "Skipped %d bad links\n", nerrs);
+
+	out += sprintf(out, "Skeleton QHs\n");
+
+	if (out - buf > len)
+		goto done;
+
+	fsbr_link = 0;
+	for (i = 0; i < UHCI_NUM_SKELQH; ++i) {
+		int cnt = 0;
+
+		qh = uhci->skelqh[i];
+		out += sprintf(out, "- skel_%s_qh\n", qh_names[i]);
+		out += uhci_show_qh(uhci, qh, out, len - (out - buf), 4);
+		if (out - buf > len)
+			goto tail;
+
+		/* Last QH is the Terminating QH, it's different */
+		if (i == SKEL_TERM) {
+			if (qh_element(qh) != LINK_TO_TD(uhci, uhci->term_td)) {
+				out += sprintf(out,
+					"    skel_term_qh element is not set to term_td!\n");
+				if (out - buf > len)
+					goto done;
+			}
+			link = fsbr_link;
+			if (!link)
+				link = LINK_TO_QH(uhci, uhci->skel_term_qh);
+			goto check_qh_link;
+		}
+
+		head = &qh->node;
+		tmp = head->next;
+
+		while (tmp != head) {
+			qh = list_entry(tmp, struct uhci_qh, node);
+			tmp = tmp->next;
+			if (++cnt <= 10) {
+				out += uhci_show_qh(uhci, qh, out,
+						len - (out - buf), 4);
+				if (out - buf > len)
+					goto tail;
+			}
+			if (!fsbr_link && qh->skel >= SKEL_FSBR)
+				fsbr_link = LINK_TO_QH(uhci, qh);
+		}
+		if ((cnt -= 10) > 0)
+			out += sprintf(out, "    Skipped %d QHs\n", cnt);
+
+		link = UHCI_PTR_TERM(uhci);
+		if (i <= SKEL_ISO)
+			;
+		else if (i < SKEL_ASYNC)
+			link = LINK_TO_QH(uhci, uhci->skel_async_qh);
+		else if (!uhci->fsbr_is_on)
+			;
+		else
+			link = LINK_TO_QH(uhci, uhci->skel_term_qh);
+check_qh_link:
+		if (qh->link != link)
+			out += sprintf(out,
+				"    last QH not linked to next skeleton!\n");
+
+		if (out - buf > len)
+			goto done;
+	}
+
+done:
+	if (out - buf > len)
+		out += sprintf(out, " ...\n");
+tail:
+	return out - buf;
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+#define MAX_OUTPUT	(64 * 1024)
+
+struct uhci_debug {
+	int size;
+	char *data;
+};
+
+static int uhci_debug_open(struct inode *inode, struct file *file)
+{
+	struct uhci_hcd *uhci = inode->i_private;
+	struct uhci_debug *up;
+	unsigned long flags;
+
+	up = kmalloc(sizeof(*up), GFP_KERNEL);
+	if (!up)
+		return -ENOMEM;
+
+	up->data = kmalloc(MAX_OUTPUT, GFP_KERNEL);
+	if (!up->data) {
+		kfree(up);
+		return -ENOMEM;
+	}
+
+	up->size = 0;
+	spin_lock_irqsave(&uhci->lock, flags);
+	if (uhci->is_initialized)
+		up->size = uhci_sprint_schedule(uhci, up->data,
+					MAX_OUTPUT - EXTRA_SPACE);
+	spin_unlock_irqrestore(&uhci->lock, flags);
+
+	file->private_data = up;
+
+	return 0;
+}
+
+static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence)
+{
+	struct uhci_debug *up = file->private_data;
+	return no_seek_end_llseek_size(file, off, whence, up->size);
+}
+
+static ssize_t uhci_debug_read(struct file *file, char __user *buf,
+				size_t nbytes, loff_t *ppos)
+{
+	struct uhci_debug *up = file->private_data;
+	return simple_read_from_buffer(buf, nbytes, ppos, up->data, up->size);
+}
+
+static int uhci_debug_release(struct inode *inode, struct file *file)
+{
+	struct uhci_debug *up = file->private_data;
+
+	kfree(up->data);
+	kfree(up);
+
+	return 0;
+}
+
+static const struct file_operations uhci_debug_operations = {
+	.owner =	THIS_MODULE,
+	.open =		uhci_debug_open,
+	.llseek =	uhci_debug_lseek,
+	.read =		uhci_debug_read,
+	.release =	uhci_debug_release,
+};
+#define UHCI_DEBUG_OPS
+
+#endif	/* CONFIG_DEBUG_FS */
+
+#else	/* CONFIG_DYNAMIC_DEBUG*/
+
+static inline void lprintk(char *buf)
+{}
+
+static inline int uhci_show_qh(struct uhci_hcd *uhci,
+		struct uhci_qh *qh, char *buf, int len, int space)
+{
+	return 0;
+}
+
+static inline int uhci_sprint_schedule(struct uhci_hcd *uhci,
+		char *buf, int len)
+{
+	return 0;
+}
+
+#endif
diff --git a/drivers/usb/host/uhci-grlib.c b/drivers/usb/host/uhci-grlib.c
new file mode 100644
index 000000000..3ef6d5283
--- /dev/null
+++ b/drivers/usb/host/uhci-grlib.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * UHCI HCD (Host Controller Driver) for GRLIB GRUSBHC
+ *
+ * Copyright (c) 2011 Jan Andersson <jan@gaisler.com>
+ *
+ * This file is based on UHCI PCI HCD:
+ * (C) Copyright 1999 Linus Torvalds
+ * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
+ * (C) Copyright 1999 Randy Dunlap
+ * (C) Copyright 1999 Georg Acher, acher@in.tum.de
+ * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
+ * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
+ * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
+ * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
+ *               support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
+ * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
+ * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
+ */
+
+#include <linux/device.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+static int uhci_grlib_init(struct usb_hcd *hcd)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+
+	/*
+	 * Probe to determine the endianness of the controller.
+	 * We know that bit 7 of the PORTSC1 register is always set
+	 * and bit 15 is always clear.  If uhci_readw() yields a value
+	 * with bit 7 (0x80) turned on then the current little-endian
+	 * setting is correct.  Otherwise we assume the value was
+	 * byte-swapped; hence the register interface and presumably
+	 * also the descriptors are big-endian.
+	 */
+	if (!(uhci_readw(uhci, USBPORTSC1) & 0x80)) {
+		uhci->big_endian_mmio = 1;
+		uhci->big_endian_desc = 1;
+	}
+
+	uhci->rh_numports = uhci_count_ports(hcd);
+
+	/* Set up pointers to generic functions */
+	uhci->reset_hc = uhci_generic_reset_hc;
+	uhci->check_and_reset_hc = uhci_generic_check_and_reset_hc;
+	/* No special actions need to be taken for the functions below */
+	uhci->configure_hc = NULL;
+	uhci->resume_detect_interrupts_are_broken = NULL;
+	uhci->global_suspend_mode_is_broken = NULL;
+
+	/* Reset if the controller isn't already safely quiescent. */
+	check_and_reset_hc(uhci);
+	return 0;
+}
+
+static const struct hc_driver uhci_grlib_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"GRLIB GRUSBHC UHCI Host Controller",
+	.hcd_priv_size =	sizeof(struct uhci_hcd),
+
+	/* Generic hardware linkage */
+	.irq =			uhci_irq,
+	.flags =		HCD_MEMORY | HCD_DMA | HCD_USB11,
+
+	/* Basic lifecycle operations */
+	.reset =		uhci_grlib_init,
+	.start =		uhci_start,
+#ifdef CONFIG_PM
+	.pci_suspend =		NULL,
+	.pci_resume =		NULL,
+	.bus_suspend =		uhci_rh_suspend,
+	.bus_resume =		uhci_rh_resume,
+#endif
+	.stop =			uhci_stop,
+
+	.urb_enqueue =		uhci_urb_enqueue,
+	.urb_dequeue =		uhci_urb_dequeue,
+
+	.endpoint_disable =	uhci_hcd_endpoint_disable,
+	.get_frame_number =	uhci_hcd_get_frame_number,
+
+	.hub_status_data =	uhci_hub_status_data,
+	.hub_control =		uhci_hub_control,
+};
+
+
+static int uhci_hcd_grlib_probe(struct platform_device *op)
+{
+	struct device_node *dn = op->dev.of_node;
+	struct usb_hcd *hcd;
+	struct uhci_hcd	*uhci = NULL;
+	struct resource res;
+	int irq;
+	int rv;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	dev_dbg(&op->dev, "initializing GRUSBHC UHCI USB Controller\n");
+
+	rv = of_address_to_resource(dn, 0, &res);
+	if (rv)
+		return rv;
+
+	/* usb_create_hcd requires dma_mask != NULL */
+	op->dev.dma_mask = &op->dev.coherent_dma_mask;
+	hcd = usb_create_hcd(&uhci_grlib_hc_driver, &op->dev,
+			"GRUSBHC UHCI USB");
+	if (!hcd)
+		return -ENOMEM;
+
+	hcd->rsrc_start = res.start;
+	hcd->rsrc_len = resource_size(&res);
+
+	irq = irq_of_parse_and_map(dn, 0);
+	if (irq == NO_IRQ) {
+		printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__);
+		rv = -EBUSY;
+		goto err_usb;
+	}
+
+	hcd->regs = devm_ioremap_resource(&op->dev, &res);
+	if (IS_ERR(hcd->regs)) {
+		rv = PTR_ERR(hcd->regs);
+		goto err_irq;
+	}
+
+	uhci = hcd_to_uhci(hcd);
+
+	uhci->regs = hcd->regs;
+
+	rv = usb_add_hcd(hcd, irq, 0);
+	if (rv)
+		goto err_irq;
+
+	device_wakeup_enable(hcd->self.controller);
+	return 0;
+
+err_irq:
+	irq_dispose_mapping(irq);
+err_usb:
+	usb_put_hcd(hcd);
+
+	return rv;
+}
+
+static int uhci_hcd_grlib_remove(struct platform_device *op)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(op);
+
+	dev_dbg(&op->dev, "stopping GRLIB GRUSBHC UHCI USB Controller\n");
+
+	usb_remove_hcd(hcd);
+
+	irq_dispose_mapping(hcd->irq);
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+/* Make sure the controller is quiescent and that we're not using it
+ * any more.  This is mainly for the benefit of programs which, like kexec,
+ * expect the hardware to be idle: not doing DMA or generating IRQs.
+ *
+ * This routine may be called in a damaged or failing kernel.  Hence we
+ * do not acquire the spinlock before shutting down the controller.
+ */
+static void uhci_hcd_grlib_shutdown(struct platform_device *op)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(op);
+
+	uhci_hc_died(hcd_to_uhci(hcd));
+}
+
+static const struct of_device_id uhci_hcd_grlib_of_match[] = {
+	{ .name = "GAISLER_UHCI", },
+	{ .name = "01_027", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, uhci_hcd_grlib_of_match);
+
+
+static struct platform_driver uhci_grlib_driver = {
+	.probe		= uhci_hcd_grlib_probe,
+	.remove		= uhci_hcd_grlib_remove,
+	.shutdown	= uhci_hcd_grlib_shutdown,
+	.driver = {
+		.name = "grlib-uhci",
+		.of_match_table = uhci_hcd_grlib_of_match,
+	},
+};
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
new file mode 100644
index 000000000..7cdc2fa7c
--- /dev/null
+++ b/drivers/usb/host/uhci-hcd.c
@@ -0,0 +1,941 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Universal Host Controller Interface driver for USB.
+ *
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
+ *
+ * (C) Copyright 1999 Linus Torvalds
+ * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
+ * (C) Copyright 1999 Randy Dunlap
+ * (C) Copyright 1999 Georg Acher, acher@in.tum.de
+ * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
+ * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
+ * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
+ * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
+ *               support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
+ * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
+ * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
+ *
+ * Intel documents this fairly well, and as far as I know there
+ * are no royalties or anything like that, but even so there are
+ * people who decided that they want to do the same thing in a
+ * completely different way.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/pm.h>
+#include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/bitops.h>
+#include <linux/dmi.h>
+
+#include <linux/uaccess.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "uhci-hcd.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_AUTHOR							\
+	"Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, "		\
+	"Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, "	\
+	"Roman Weissgaerber, Alan Stern"
+#define DRIVER_DESC "USB Universal Host Controller Interface driver"
+
+/* for flakey hardware, ignore overcurrent indicators */
+static bool ignore_oc;
+module_param(ignore_oc, bool, S_IRUGO);
+MODULE_PARM_DESC(ignore_oc, "ignore hardware overcurrent indications");
+
+/*
+ * debug = 0, no debugging messages
+ * debug = 1, dump failed URBs except for stalls
+ * debug = 2, dump all failed URBs (including stalls)
+ *            show all queues in /sys/kernel/debug/uhci/[pci_addr]
+ * debug = 3, show all TDs in URBs when dumping
+ */
+#ifdef CONFIG_DYNAMIC_DEBUG
+
+static int debug = 1;
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug level");
+static char *errbuf;
+
+#else
+
+#define debug 0
+#define errbuf NULL
+
+#endif
+
+
+#define ERRBUF_LEN    (32 * 1024)
+
+static struct kmem_cache *uhci_up_cachep;	/* urb_priv */
+
+static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state);
+static void wakeup_rh(struct uhci_hcd *uhci);
+static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
+
+/*
+ * Calculate the link pointer DMA value for the first Skeleton QH in a frame.
+ */
+static __hc32 uhci_frame_skel_link(struct uhci_hcd *uhci, int frame)
+{
+	int skelnum;
+
+	/*
+	 * The interrupt queues will be interleaved as evenly as possible.
+	 * There's not much to be done about period-1 interrupts; they have
+	 * to occur in every frame.  But we can schedule period-2 interrupts
+	 * in odd-numbered frames, period-4 interrupts in frames congruent
+	 * to 2 (mod 4), and so on.  This way each frame only has two
+	 * interrupt QHs, which will help spread out bandwidth utilization.
+	 *
+	 * ffs (Find First bit Set) does exactly what we need:
+	 * 1,3,5,...  => ffs = 0 => use period-2 QH = skelqh[8],
+	 * 2,6,10,... => ffs = 1 => use period-4 QH = skelqh[7], etc.
+	 * ffs >= 7 => not on any high-period queue, so use
+	 *	period-1 QH = skelqh[9].
+	 * Add in UHCI_NUMFRAMES to insure at least one bit is set.
+	 */
+	skelnum = 8 - (int) __ffs(frame | UHCI_NUMFRAMES);
+	if (skelnum <= 1)
+		skelnum = 9;
+	return LINK_TO_QH(uhci, uhci->skelqh[skelnum]);
+}
+
+#include "uhci-debug.c"
+#include "uhci-q.c"
+#include "uhci-hub.c"
+
+/*
+ * Finish up a host controller reset and update the recorded state.
+ */
+static void finish_reset(struct uhci_hcd *uhci)
+{
+	int port;
+
+	/* HCRESET doesn't affect the Suspend, Reset, and Resume Detect
+	 * bits in the port status and control registers.
+	 * We have to clear them by hand.
+	 */
+	for (port = 0; port < uhci->rh_numports; ++port)
+		uhci_writew(uhci, 0, USBPORTSC1 + (port * 2));
+
+	uhci->port_c_suspend = uhci->resuming_ports = 0;
+	uhci->rh_state = UHCI_RH_RESET;
+	uhci->is_stopped = UHCI_IS_STOPPED;
+	clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
+}
+
+/*
+ * Last rites for a defunct/nonfunctional controller
+ * or one we don't want to use any more.
+ */
+static void uhci_hc_died(struct uhci_hcd *uhci)
+{
+	uhci_get_current_frame_number(uhci);
+	uhci->reset_hc(uhci);
+	finish_reset(uhci);
+	uhci->dead = 1;
+
+	/* The current frame may already be partway finished */
+	++uhci->frame_number;
+}
+
+/*
+ * Initialize a controller that was newly discovered or has lost power
+ * or otherwise been reset while it was suspended.  In none of these cases
+ * can we be sure of its previous state.
+ */
+static void check_and_reset_hc(struct uhci_hcd *uhci)
+{
+	if (uhci->check_and_reset_hc(uhci))
+		finish_reset(uhci);
+}
+
+#if defined(CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC)
+/*
+ * The two functions below are generic reset functions that are used on systems
+ * that do not have keyboard and mouse legacy support. We assume that we are
+ * running on such a system if CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC is defined.
+ */
+
+/*
+ * Make sure the controller is completely inactive, unable to
+ * generate interrupts or do DMA.
+ */
+static void uhci_generic_reset_hc(struct uhci_hcd *uhci)
+{
+	/* Reset the HC - this will force us to get a
+	 * new notification of any already connected
+	 * ports due to the virtual disconnect that it
+	 * implies.
+	 */
+	uhci_writew(uhci, USBCMD_HCRESET, USBCMD);
+	mb();
+	udelay(5);
+	if (uhci_readw(uhci, USBCMD) & USBCMD_HCRESET)
+		dev_warn(uhci_dev(uhci), "HCRESET not completed yet!\n");
+
+	/* Just to be safe, disable interrupt requests and
+	 * make sure the controller is stopped.
+	 */
+	uhci_writew(uhci, 0, USBINTR);
+	uhci_writew(uhci, 0, USBCMD);
+}
+
+/*
+ * Initialize a controller that was newly discovered or has just been
+ * resumed.  In either case we can't be sure of its previous state.
+ *
+ * Returns: 1 if the controller was reset, 0 otherwise.
+ */
+static int uhci_generic_check_and_reset_hc(struct uhci_hcd *uhci)
+{
+	unsigned int cmd, intr;
+
+	/*
+	 * When restarting a suspended controller, we expect all the
+	 * settings to be the same as we left them:
+	 *
+	 *	Controller is stopped and configured with EGSM set;
+	 *	No interrupts enabled except possibly Resume Detect.
+	 *
+	 * If any of these conditions are violated we do a complete reset.
+	 */
+
+	cmd = uhci_readw(uhci, USBCMD);
+	if ((cmd & USBCMD_RS) || !(cmd & USBCMD_CF) || !(cmd & USBCMD_EGSM)) {
+		dev_dbg(uhci_dev(uhci), "%s: cmd = 0x%04x\n",
+				__func__, cmd);
+		goto reset_needed;
+	}
+
+	intr = uhci_readw(uhci, USBINTR);
+	if (intr & (~USBINTR_RESUME)) {
+		dev_dbg(uhci_dev(uhci), "%s: intr = 0x%04x\n",
+				__func__, intr);
+		goto reset_needed;
+	}
+	return 0;
+
+reset_needed:
+	dev_dbg(uhci_dev(uhci), "Performing full reset\n");
+	uhci_generic_reset_hc(uhci);
+	return 1;
+}
+#endif /* CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC */
+
+/*
+ * Store the basic register settings needed by the controller.
+ */
+static void configure_hc(struct uhci_hcd *uhci)
+{
+	/* Set the frame length to the default: 1 ms exactly */
+	uhci_writeb(uhci, USBSOF_DEFAULT, USBSOF);
+
+	/* Store the frame list base address */
+	uhci_writel(uhci, uhci->frame_dma_handle, USBFLBASEADD);
+
+	/* Set the current frame number */
+	uhci_writew(uhci, uhci->frame_number & UHCI_MAX_SOF_NUMBER,
+			USBFRNUM);
+
+	/* perform any arch/bus specific configuration */
+	if (uhci->configure_hc)
+		uhci->configure_hc(uhci);
+}
+
+static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
+{
+	/*
+	 * If we have to ignore overcurrent events then almost by definition
+	 * we can't depend on resume-detect interrupts.
+	 *
+	 * Those interrupts also don't seem to work on ASpeed SoCs.
+	 */
+	if (ignore_oc || uhci_is_aspeed(uhci))
+		return 1;
+
+	return uhci->resume_detect_interrupts_are_broken ?
+		uhci->resume_detect_interrupts_are_broken(uhci) : 0;
+}
+
+static int global_suspend_mode_is_broken(struct uhci_hcd *uhci)
+{
+	return uhci->global_suspend_mode_is_broken ?
+		uhci->global_suspend_mode_is_broken(uhci) : 0;
+}
+
+static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state)
+__releases(uhci->lock)
+__acquires(uhci->lock)
+{
+	int auto_stop;
+	int int_enable, egsm_enable, wakeup_enable;
+	struct usb_device *rhdev = uhci_to_hcd(uhci)->self.root_hub;
+
+	auto_stop = (new_state == UHCI_RH_AUTO_STOPPED);
+	dev_dbg(&rhdev->dev, "%s%s\n", __func__,
+			(auto_stop ? " (auto-stop)" : ""));
+
+	/* Start off by assuming Resume-Detect interrupts and EGSM work
+	 * and that remote wakeups should be enabled.
+	 */
+	egsm_enable = USBCMD_EGSM;
+	int_enable = USBINTR_RESUME;
+	wakeup_enable = 1;
+
+	/*
+	 * In auto-stop mode, we must be able to detect new connections.
+	 * The user can force us to poll by disabling remote wakeup;
+	 * otherwise we will use the EGSM/RD mechanism.
+	 */
+	if (auto_stop) {
+		if (!device_may_wakeup(&rhdev->dev))
+			egsm_enable = int_enable = 0;
+	}
+
+#ifdef CONFIG_PM
+	/*
+	 * In bus-suspend mode, we use the wakeup setting specified
+	 * for the root hub.
+	 */
+	else {
+		if (!rhdev->do_remote_wakeup)
+			wakeup_enable = 0;
+	}
+#endif
+
+	/*
+	 * UHCI doesn't distinguish between wakeup requests from downstream
+	 * devices and local connect/disconnect events.  There's no way to
+	 * enable one without the other; both are controlled by EGSM.  Thus
+	 * if wakeups are disallowed then EGSM must be turned off -- in which
+	 * case remote wakeup requests from downstream during system sleep
+	 * will be lost.
+	 *
+	 * In addition, if EGSM is broken then we can't use it.  Likewise,
+	 * if Resume-Detect interrupts are broken then we can't use them.
+	 *
+	 * Finally, neither EGSM nor RD is useful by itself.  Without EGSM,
+	 * the RD status bit will never get set.  Without RD, the controller
+	 * won't generate interrupts to tell the system about wakeup events.
+	 */
+	if (!wakeup_enable || global_suspend_mode_is_broken(uhci) ||
+			resume_detect_interrupts_are_broken(uhci))
+		egsm_enable = int_enable = 0;
+
+	uhci->RD_enable = !!int_enable;
+	uhci_writew(uhci, int_enable, USBINTR);
+	uhci_writew(uhci, egsm_enable | USBCMD_CF, USBCMD);
+	mb();
+	udelay(5);
+
+	/* If we're auto-stopping then no devices have been attached
+	 * for a while, so there shouldn't be any active URBs and the
+	 * controller should stop after a few microseconds.  Otherwise
+	 * we will give the controller one frame to stop.
+	 */
+	if (!auto_stop && !(uhci_readw(uhci, USBSTS) & USBSTS_HCH)) {
+		uhci->rh_state = UHCI_RH_SUSPENDING;
+		spin_unlock_irq(&uhci->lock);
+		msleep(1);
+		spin_lock_irq(&uhci->lock);
+		if (uhci->dead)
+			return;
+	}
+	if (!(uhci_readw(uhci, USBSTS) & USBSTS_HCH))
+		dev_warn(uhci_dev(uhci), "Controller not stopped yet!\n");
+
+	uhci_get_current_frame_number(uhci);
+
+	uhci->rh_state = new_state;
+	uhci->is_stopped = UHCI_IS_STOPPED;
+
+	/*
+	 * If remote wakeup is enabled but either EGSM or RD interrupts
+	 * doesn't work, then we won't get an interrupt when a wakeup event
+	 * occurs.  Thus the suspended root hub needs to be polled.
+	 */
+	if (wakeup_enable && (!int_enable || !egsm_enable))
+		set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
+	else
+		clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
+
+	uhci_scan_schedule(uhci);
+	uhci_fsbr_off(uhci);
+}
+
+static void start_rh(struct uhci_hcd *uhci)
+{
+	uhci->is_stopped = 0;
+
+	/*
+	 * Clear stale status bits on Aspeed as we get a stale HCH
+	 * which causes problems later on
+	 */
+	if (uhci_is_aspeed(uhci))
+		uhci_writew(uhci, uhci_readw(uhci, USBSTS), USBSTS);
+
+	/* Mark it configured and running with a 64-byte max packet.
+	 * All interrupts are enabled, even though RESUME won't do anything.
+	 */
+	uhci_writew(uhci, USBCMD_RS | USBCMD_CF | USBCMD_MAXP, USBCMD);
+	uhci_writew(uhci, USBINTR_TIMEOUT | USBINTR_RESUME |
+		USBINTR_IOC | USBINTR_SP, USBINTR);
+	mb();
+	uhci->rh_state = UHCI_RH_RUNNING;
+	set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
+}
+
+static void wakeup_rh(struct uhci_hcd *uhci)
+__releases(uhci->lock)
+__acquires(uhci->lock)
+{
+	dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev,
+			"%s%s\n", __func__,
+			uhci->rh_state == UHCI_RH_AUTO_STOPPED ?
+				" (auto-start)" : "");
+
+	/* If we are auto-stopped then no devices are attached so there's
+	 * no need for wakeup signals.  Otherwise we send Global Resume
+	 * for 20 ms.
+	 */
+	if (uhci->rh_state == UHCI_RH_SUSPENDED) {
+		unsigned egsm;
+
+		/* Keep EGSM on if it was set before */
+		egsm = uhci_readw(uhci, USBCMD) & USBCMD_EGSM;
+		uhci->rh_state = UHCI_RH_RESUMING;
+		uhci_writew(uhci, USBCMD_FGR | USBCMD_CF | egsm, USBCMD);
+		spin_unlock_irq(&uhci->lock);
+		msleep(20);
+		spin_lock_irq(&uhci->lock);
+		if (uhci->dead)
+			return;
+
+		/* End Global Resume and wait for EOP to be sent */
+		uhci_writew(uhci, USBCMD_CF, USBCMD);
+		mb();
+		udelay(4);
+		if (uhci_readw(uhci, USBCMD) & USBCMD_FGR)
+			dev_warn(uhci_dev(uhci), "FGR not stopped yet!\n");
+	}
+
+	start_rh(uhci);
+
+	/* Restart root hub polling */
+	mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
+}
+
+static irqreturn_t uhci_irq(struct usb_hcd *hcd)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	unsigned short status;
+
+	/*
+	 * Read the interrupt status, and write it back to clear the
+	 * interrupt cause.  Contrary to the UHCI specification, the
+	 * "HC Halted" status bit is persistent: it is RO, not R/WC.
+	 */
+	status = uhci_readw(uhci, USBSTS);
+	if (!(status & ~USBSTS_HCH))	/* shared interrupt, not mine */
+		return IRQ_NONE;
+	uhci_writew(uhci, status, USBSTS);		/* Clear it */
+
+	spin_lock(&uhci->lock);
+	if (unlikely(!uhci->is_initialized))	/* not yet configured */
+		goto done;
+
+	if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) {
+		if (status & USBSTS_HSE)
+			dev_err(uhci_dev(uhci),
+				"host system error, PCI problems?\n");
+		if (status & USBSTS_HCPE)
+			dev_err(uhci_dev(uhci),
+				"host controller process error, something bad happened!\n");
+		if (status & USBSTS_HCH) {
+			if (uhci->rh_state >= UHCI_RH_RUNNING) {
+				dev_err(uhci_dev(uhci),
+					"host controller halted, very bad!\n");
+				if (debug > 1 && errbuf) {
+					/* Print the schedule for debugging */
+					uhci_sprint_schedule(uhci, errbuf,
+						ERRBUF_LEN - EXTRA_SPACE);
+					lprintk(errbuf);
+				}
+				uhci_hc_died(uhci);
+				usb_hc_died(hcd);
+
+				/* Force a callback in case there are
+				 * pending unlinks */
+				mod_timer(&hcd->rh_timer, jiffies);
+			}
+		}
+	}
+
+	if (status & USBSTS_RD) {
+		spin_unlock(&uhci->lock);
+		usb_hcd_poll_rh_status(hcd);
+	} else {
+		uhci_scan_schedule(uhci);
+ done:
+		spin_unlock(&uhci->lock);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Store the current frame number in uhci->frame_number if the controller
+ * is running.  Expand from 11 bits (of which we use only 10) to a
+ * full-sized integer.
+ *
+ * Like many other parts of the driver, this code relies on being polled
+ * more than once per second as long as the controller is running.
+ */
+static void uhci_get_current_frame_number(struct uhci_hcd *uhci)
+{
+	if (!uhci->is_stopped) {
+		unsigned delta;
+
+		delta = (uhci_readw(uhci, USBFRNUM) - uhci->frame_number) &
+				(UHCI_NUMFRAMES - 1);
+		uhci->frame_number += delta;
+	}
+}
+
+/*
+ * De-allocate all resources
+ */
+static void release_uhci(struct uhci_hcd *uhci)
+{
+	int i;
+
+
+	spin_lock_irq(&uhci->lock);
+	uhci->is_initialized = 0;
+	spin_unlock_irq(&uhci->lock);
+
+	debugfs_lookup_and_remove(uhci_to_hcd(uhci)->self.bus_name,
+				  uhci_debugfs_root);
+
+	for (i = 0; i < UHCI_NUM_SKELQH; i++)
+		uhci_free_qh(uhci, uhci->skelqh[i]);
+
+	uhci_free_td(uhci, uhci->term_td);
+
+	dma_pool_destroy(uhci->qh_pool);
+
+	dma_pool_destroy(uhci->td_pool);
+
+	kfree(uhci->frame_cpu);
+
+	dma_free_coherent(uhci_dev(uhci),
+			UHCI_NUMFRAMES * sizeof(*uhci->frame),
+			uhci->frame, uhci->frame_dma_handle);
+}
+
+/*
+ * Allocate a frame list, and then setup the skeleton
+ *
+ * The hardware doesn't really know any difference
+ * in the queues, but the order does matter for the
+ * protocols higher up.  The order in which the queues
+ * are encountered by the hardware is:
+ *
+ *  - All isochronous events are handled before any
+ *    of the queues. We don't do that here, because
+ *    we'll create the actual TD entries on demand.
+ *  - The first queue is the high-period interrupt queue.
+ *  - The second queue is the period-1 interrupt and async
+ *    (low-speed control, full-speed control, then bulk) queue.
+ *  - The third queue is the terminating bandwidth reclamation queue,
+ *    which contains no members, loops back to itself, and is present
+ *    only when FSBR is on and there are no full-speed control or bulk QHs.
+ */
+static int uhci_start(struct usb_hcd *hcd)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	int retval = -EBUSY;
+	int i;
+
+	hcd->uses_new_polling = 1;
+	/* Accept arbitrarily long scatter-gather lists */
+	if (!hcd->localmem_pool)
+		hcd->self.sg_tablesize = ~0;
+
+	spin_lock_init(&uhci->lock);
+	timer_setup(&uhci->fsbr_timer, uhci_fsbr_timeout, 0);
+	INIT_LIST_HEAD(&uhci->idle_qh_list);
+	init_waitqueue_head(&uhci->waitqh);
+
+#ifdef UHCI_DEBUG_OPS
+	debugfs_create_file(hcd->self.bus_name, S_IFREG|S_IRUGO|S_IWUSR,
+			    uhci_debugfs_root, uhci, &uhci_debug_operations);
+#endif
+
+	uhci->frame = dma_alloc_coherent(uhci_dev(uhci),
+					 UHCI_NUMFRAMES * sizeof(*uhci->frame),
+					 &uhci->frame_dma_handle, GFP_KERNEL);
+	if (!uhci->frame) {
+		dev_err(uhci_dev(uhci),
+			"unable to allocate consistent memory for frame list\n");
+		goto err_alloc_frame;
+	}
+
+	uhci->frame_cpu = kcalloc(UHCI_NUMFRAMES, sizeof(*uhci->frame_cpu),
+			GFP_KERNEL);
+	if (!uhci->frame_cpu)
+		goto err_alloc_frame_cpu;
+
+	uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci),
+			sizeof(struct uhci_td), 16, 0);
+	if (!uhci->td_pool) {
+		dev_err(uhci_dev(uhci), "unable to create td dma_pool\n");
+		goto err_create_td_pool;
+	}
+
+	uhci->qh_pool = dma_pool_create("uhci_qh", uhci_dev(uhci),
+			sizeof(struct uhci_qh), 16, 0);
+	if (!uhci->qh_pool) {
+		dev_err(uhci_dev(uhci), "unable to create qh dma_pool\n");
+		goto err_create_qh_pool;
+	}
+
+	uhci->term_td = uhci_alloc_td(uhci);
+	if (!uhci->term_td) {
+		dev_err(uhci_dev(uhci), "unable to allocate terminating TD\n");
+		goto err_alloc_term_td;
+	}
+
+	for (i = 0; i < UHCI_NUM_SKELQH; i++) {
+		uhci->skelqh[i] = uhci_alloc_qh(uhci, NULL, NULL);
+		if (!uhci->skelqh[i]) {
+			dev_err(uhci_dev(uhci), "unable to allocate QH\n");
+			goto err_alloc_skelqh;
+		}
+	}
+
+	/*
+	 * 8 Interrupt queues; link all higher int queues to int1 = async
+	 */
+	for (i = SKEL_ISO + 1; i < SKEL_ASYNC; ++i)
+		uhci->skelqh[i]->link = LINK_TO_QH(uhci, uhci->skel_async_qh);
+	uhci->skel_async_qh->link = UHCI_PTR_TERM(uhci);
+	uhci->skel_term_qh->link = LINK_TO_QH(uhci, uhci->skel_term_qh);
+
+	/* This dummy TD is to work around a bug in Intel PIIX controllers */
+	uhci_fill_td(uhci, uhci->term_td, 0, uhci_explen(0) |
+			(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
+	uhci->term_td->link = UHCI_PTR_TERM(uhci);
+	uhci->skel_async_qh->element = uhci->skel_term_qh->element =
+		LINK_TO_TD(uhci, uhci->term_td);
+
+	/*
+	 * Fill the frame list: make all entries point to the proper
+	 * interrupt queue.
+	 */
+	for (i = 0; i < UHCI_NUMFRAMES; i++) {
+
+		/* Only place we don't use the frame list routines */
+		uhci->frame[i] = uhci_frame_skel_link(uhci, i);
+	}
+
+	/*
+	 * Some architectures require a full mb() to enforce completion of
+	 * the memory writes above before the I/O transfers in configure_hc().
+	 */
+	mb();
+
+	spin_lock_irq(&uhci->lock);
+	configure_hc(uhci);
+	uhci->is_initialized = 1;
+	start_rh(uhci);
+	spin_unlock_irq(&uhci->lock);
+	return 0;
+
+/*
+ * error exits:
+ */
+err_alloc_skelqh:
+	for (i = 0; i < UHCI_NUM_SKELQH; i++) {
+		if (uhci->skelqh[i])
+			uhci_free_qh(uhci, uhci->skelqh[i]);
+	}
+
+	uhci_free_td(uhci, uhci->term_td);
+
+err_alloc_term_td:
+	dma_pool_destroy(uhci->qh_pool);
+
+err_create_qh_pool:
+	dma_pool_destroy(uhci->td_pool);
+
+err_create_td_pool:
+	kfree(uhci->frame_cpu);
+
+err_alloc_frame_cpu:
+	dma_free_coherent(uhci_dev(uhci),
+			UHCI_NUMFRAMES * sizeof(*uhci->frame),
+			uhci->frame, uhci->frame_dma_handle);
+
+err_alloc_frame:
+	debugfs_lookup_and_remove(hcd->self.bus_name, uhci_debugfs_root);
+
+	return retval;
+}
+
+static void uhci_stop(struct usb_hcd *hcd)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+
+	spin_lock_irq(&uhci->lock);
+	if (HCD_HW_ACCESSIBLE(hcd) && !uhci->dead)
+		uhci_hc_died(uhci);
+	uhci_scan_schedule(uhci);
+	spin_unlock_irq(&uhci->lock);
+	synchronize_irq(hcd->irq);
+
+	del_timer_sync(&uhci->fsbr_timer);
+	release_uhci(uhci);
+}
+
+#ifdef CONFIG_PM
+static int uhci_rh_suspend(struct usb_hcd *hcd)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	int rc = 0;
+
+	spin_lock_irq(&uhci->lock);
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		rc = -ESHUTDOWN;
+	else if (uhci->dead)
+		;		/* Dead controllers tell no tales */
+
+	/* Once the controller is stopped, port resumes that are already
+	 * in progress won't complete.  Hence if remote wakeup is enabled
+	 * for the root hub and any ports are in the middle of a resume or
+	 * remote wakeup, we must fail the suspend.
+	 */
+	else if (hcd->self.root_hub->do_remote_wakeup &&
+			uhci->resuming_ports) {
+		dev_dbg(uhci_dev(uhci),
+			"suspend failed because a port is resuming\n");
+		rc = -EBUSY;
+	} else
+		suspend_rh(uhci, UHCI_RH_SUSPENDED);
+	spin_unlock_irq(&uhci->lock);
+	return rc;
+}
+
+static int uhci_rh_resume(struct usb_hcd *hcd)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	int rc = 0;
+
+	spin_lock_irq(&uhci->lock);
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		rc = -ESHUTDOWN;
+	else if (!uhci->dead)
+		wakeup_rh(uhci);
+	spin_unlock_irq(&uhci->lock);
+	return rc;
+}
+
+#endif
+
+/* Wait until a particular device/endpoint's QH is idle, and free it */
+static void uhci_hcd_endpoint_disable(struct usb_hcd *hcd,
+		struct usb_host_endpoint *hep)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	struct uhci_qh *qh;
+
+	spin_lock_irq(&uhci->lock);
+	qh = (struct uhci_qh *) hep->hcpriv;
+	if (qh == NULL)
+		goto done;
+
+	while (qh->state != QH_STATE_IDLE) {
+		++uhci->num_waiting;
+		spin_unlock_irq(&uhci->lock);
+		wait_event_interruptible(uhci->waitqh,
+				qh->state == QH_STATE_IDLE);
+		spin_lock_irq(&uhci->lock);
+		--uhci->num_waiting;
+	}
+
+	uhci_free_qh(uhci, qh);
+done:
+	spin_unlock_irq(&uhci->lock);
+}
+
+static int uhci_hcd_get_frame_number(struct usb_hcd *hcd)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	unsigned frame_number;
+	unsigned delta;
+
+	/* Minimize latency by avoiding the spinlock */
+	frame_number = uhci->frame_number;
+	barrier();
+	delta = (uhci_readw(uhci, USBFRNUM) - frame_number) &
+			(UHCI_NUMFRAMES - 1);
+	return frame_number + delta;
+}
+
+/* Determines number of ports on controller */
+static int uhci_count_ports(struct usb_hcd *hcd)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	unsigned io_size = (unsigned) hcd->rsrc_len;
+	int port;
+
+	/* The UHCI spec says devices must have 2 ports, and goes on to say
+	 * they may have more but gives no way to determine how many there
+	 * are.  However according to the UHCI spec, Bit 7 of the port
+	 * status and control register is always set to 1.  So we try to
+	 * use this to our advantage.  Another common failure mode when
+	 * a nonexistent register is addressed is to return all ones, so
+	 * we test for that also.
+	 */
+	for (port = 0; port < (io_size - USBPORTSC1) / 2; port++) {
+		unsigned int portstatus;
+
+		portstatus = uhci_readw(uhci, USBPORTSC1 + (port * 2));
+		if (!(portstatus & 0x0080) || portstatus == 0xffff)
+			break;
+	}
+	if (debug)
+		dev_info(uhci_dev(uhci), "detected %d ports\n", port);
+
+	/* Anything greater than 7 is weird so we'll ignore it. */
+	if (port > UHCI_RH_MAXCHILD) {
+		dev_info(uhci_dev(uhci),
+			"port count misdetected? forcing to 2 ports\n");
+		port = 2;
+	}
+
+	return port;
+}
+
+static const char hcd_name[] = "uhci_hcd";
+
+#ifdef CONFIG_USB_PCI
+#include "uhci-pci.c"
+#define	PCI_DRIVER		uhci_pci_driver
+#endif
+
+#ifdef CONFIG_SPARC_LEON
+#include "uhci-grlib.c"
+#define PLATFORM_DRIVER		uhci_grlib_driver
+#endif
+
+#ifdef CONFIG_USB_UHCI_PLATFORM
+#include "uhci-platform.c"
+#define PLATFORM_DRIVER		uhci_platform_driver
+#endif
+
+#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER)
+#error "missing bus glue for uhci-hcd"
+#endif
+
+static int __init uhci_hcd_init(void)
+{
+	int retval = -ENOMEM;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	set_bit(USB_UHCI_LOADED, &usb_hcds_loaded);
+
+#ifdef CONFIG_DYNAMIC_DEBUG
+	errbuf = kmalloc(ERRBUF_LEN, GFP_KERNEL);
+	if (!errbuf)
+		goto errbuf_failed;
+	uhci_debugfs_root = debugfs_create_dir("uhci", usb_debug_root);
+#endif
+
+	uhci_up_cachep = kmem_cache_create("uhci_urb_priv",
+		sizeof(struct urb_priv), 0, 0, NULL);
+	if (!uhci_up_cachep)
+		goto up_failed;
+
+#ifdef PLATFORM_DRIVER
+	retval = platform_driver_register(&PLATFORM_DRIVER);
+	if (retval < 0)
+		goto clean0;
+#endif
+
+#ifdef PCI_DRIVER
+	retval = pci_register_driver(&PCI_DRIVER);
+	if (retval < 0)
+		goto clean1;
+#endif
+
+	return 0;
+
+#ifdef PCI_DRIVER
+clean1:
+#endif
+#ifdef PLATFORM_DRIVER
+	platform_driver_unregister(&PLATFORM_DRIVER);
+clean0:
+#endif
+	kmem_cache_destroy(uhci_up_cachep);
+
+up_failed:
+#if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG)
+	debugfs_remove(uhci_debugfs_root);
+
+	kfree(errbuf);
+
+errbuf_failed:
+#endif
+
+	clear_bit(USB_UHCI_LOADED, &usb_hcds_loaded);
+	return retval;
+}
+
+static void __exit uhci_hcd_cleanup(void) 
+{
+#ifdef PLATFORM_DRIVER
+	platform_driver_unregister(&PLATFORM_DRIVER);
+#endif
+#ifdef PCI_DRIVER
+	pci_unregister_driver(&PCI_DRIVER);
+#endif
+	kmem_cache_destroy(uhci_up_cachep);
+	debugfs_remove(uhci_debugfs_root);
+#ifdef CONFIG_DYNAMIC_DEBUG
+	kfree(errbuf);
+#endif
+	clear_bit(USB_UHCI_LOADED, &usb_hcds_loaded);
+}
+
+module_init(uhci_hcd_init);
+module_exit(uhci_hcd_cleanup);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
new file mode 100644
index 000000000..0688c3e5b
--- /dev/null
+++ b/drivers/usb/host/uhci-hcd.h
@@ -0,0 +1,711 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_UHCI_HCD_H
+#define __LINUX_UHCI_HCD_H
+
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/clk.h>
+
+#define usb_packetid(pipe)	(usb_pipein(pipe) ? USB_PID_IN : USB_PID_OUT)
+#define PIPE_DEVEP_MASK		0x0007ff00
+
+
+/*
+ * Universal Host Controller Interface data structures and defines
+ */
+
+/* Command register */
+#define USBCMD		0
+#define   USBCMD_RS		0x0001	/* Run/Stop */
+#define   USBCMD_HCRESET	0x0002	/* Host reset */
+#define   USBCMD_GRESET		0x0004	/* Global reset */
+#define   USBCMD_EGSM		0x0008	/* Global Suspend Mode */
+#define   USBCMD_FGR		0x0010	/* Force Global Resume */
+#define   USBCMD_SWDBG		0x0020	/* SW Debug mode */
+#define   USBCMD_CF		0x0040	/* Config Flag (sw only) */
+#define   USBCMD_MAXP		0x0080	/* Max Packet (0 = 32, 1 = 64) */
+
+/* Status register */
+#define USBSTS		2
+#define   USBSTS_USBINT		0x0001	/* Interrupt due to IOC */
+#define   USBSTS_ERROR		0x0002	/* Interrupt due to error */
+#define   USBSTS_RD		0x0004	/* Resume Detect */
+#define   USBSTS_HSE		0x0008	/* Host System Error: PCI problems */
+#define   USBSTS_HCPE		0x0010	/* Host Controller Process Error:
+					 * the schedule is buggy */
+#define   USBSTS_HCH		0x0020	/* HC Halted */
+
+/* Interrupt enable register */
+#define USBINTR		4
+#define   USBINTR_TIMEOUT	0x0001	/* Timeout/CRC error enable */
+#define   USBINTR_RESUME	0x0002	/* Resume interrupt enable */
+#define   USBINTR_IOC		0x0004	/* Interrupt On Complete enable */
+#define   USBINTR_SP		0x0008	/* Short packet interrupt enable */
+
+#define USBFRNUM	6
+#define USBFLBASEADD	8
+#define USBSOF		12
+#define   USBSOF_DEFAULT	64	/* Frame length is exactly 1 ms */
+
+/* USB port status and control registers */
+#define USBPORTSC1	16
+#define USBPORTSC2	18
+#define USBPORTSC3	20
+#define USBPORTSC4	22
+#define   USBPORTSC_CCS		0x0001	/* Current Connect Status
+					 * ("device present") */
+#define   USBPORTSC_CSC		0x0002	/* Connect Status Change */
+#define   USBPORTSC_PE		0x0004	/* Port Enable */
+#define   USBPORTSC_PEC		0x0008	/* Port Enable Change */
+#define   USBPORTSC_DPLUS	0x0010	/* D+ high (line status) */
+#define   USBPORTSC_DMINUS	0x0020	/* D- high (line status) */
+#define   USBPORTSC_RD		0x0040	/* Resume Detect */
+#define   USBPORTSC_RES1	0x0080	/* reserved, always 1 */
+#define   USBPORTSC_LSDA	0x0100	/* Low Speed Device Attached */
+#define   USBPORTSC_PR		0x0200	/* Port Reset */
+/* OC and OCC from Intel 430TX and later (not UHCI 1.1d spec) */
+#define   USBPORTSC_OC		0x0400	/* Over Current condition */
+#define   USBPORTSC_OCC		0x0800	/* Over Current Change R/WC */
+#define   USBPORTSC_SUSP	0x1000	/* Suspend */
+#define   USBPORTSC_RES2	0x2000	/* reserved, write zeroes */
+#define   USBPORTSC_RES3	0x4000	/* reserved, write zeroes */
+#define   USBPORTSC_RES4	0x8000	/* reserved, write zeroes */
+
+/* PCI legacy support register */
+#define USBLEGSUP		0xc0
+#define   USBLEGSUP_DEFAULT	0x2000	/* only PIRQ enable set */
+#define   USBLEGSUP_RWC		0x8f00	/* the R/WC bits */
+#define   USBLEGSUP_RO		0x5040	/* R/O and reserved bits */
+
+/* PCI Intel-specific resume-enable register */
+#define USBRES_INTEL		0xc4
+#define   USBPORT1EN		0x01
+#define   USBPORT2EN		0x02
+
+#define UHCI_PTR_BITS(uhci)	cpu_to_hc32((uhci), 0x000F)
+#define UHCI_PTR_TERM(uhci)	cpu_to_hc32((uhci), 0x0001)
+#define UHCI_PTR_QH(uhci)	cpu_to_hc32((uhci), 0x0002)
+#define UHCI_PTR_DEPTH(uhci)	cpu_to_hc32((uhci), 0x0004)
+#define UHCI_PTR_BREADTH(uhci)	cpu_to_hc32((uhci), 0x0000)
+
+#define UHCI_NUMFRAMES		1024	/* in the frame list [array] */
+#define UHCI_MAX_SOF_NUMBER	2047	/* in an SOF packet */
+#define CAN_SCHEDULE_FRAMES	1000	/* how far in the future frames
+					 * can be scheduled */
+#define MAX_PHASE		32	/* Periodic scheduling length */
+
+/* When no queues need Full-Speed Bandwidth Reclamation,
+ * delay this long before turning FSBR off */
+#define FSBR_OFF_DELAY		msecs_to_jiffies(10)
+
+/* If a queue hasn't advanced after this much time, assume it is stuck */
+#define QH_WAIT_TIMEOUT		msecs_to_jiffies(200)
+
+
+/*
+ * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
+ * __leXX (normally) or __beXX (given UHCI_BIG_ENDIAN_DESC), depending on
+ * the host controller implementation.
+ *
+ * To facilitate the strongest possible byte-order checking from "sparse"
+ * and so on, we use __leXX unless that's not practical.
+ */
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_DESC
+typedef __u32 __bitwise __hc32;
+typedef __u16 __bitwise __hc16;
+#else
+#define __hc32	__le32
+#define __hc16	__le16
+#endif
+
+/*
+ *	Queue Headers
+ */
+
+/*
+ * One role of a QH is to hold a queue of TDs for some endpoint.  One QH goes
+ * with each endpoint, and qh->element (updated by the HC) is either:
+ *   - the next unprocessed TD in the endpoint's queue, or
+ *   - UHCI_PTR_TERM (when there's no more traffic for this endpoint).
+ *
+ * The other role of a QH is to serve as a "skeleton" framelist entry, so we
+ * can easily splice a QH for some endpoint into the schedule at the right
+ * place.  Then qh->element is UHCI_PTR_TERM.
+ *
+ * In the schedule, qh->link maintains a list of QHs seen by the HC:
+ *     skel1 --> ep1-qh --> ep2-qh --> ... --> skel2 --> ...
+ *
+ * qh->node is the software equivalent of qh->link.  The differences
+ * are that the software list is doubly-linked and QHs in the UNLINKING
+ * state are on the software list but not the hardware schedule.
+ *
+ * For bookkeeping purposes we maintain QHs even for Isochronous endpoints,
+ * but they never get added to the hardware schedule.
+ */
+#define QH_STATE_IDLE		1	/* QH is not being used */
+#define QH_STATE_UNLINKING	2	/* QH has been removed from the
+					 * schedule but the hardware may
+					 * still be using it */
+#define QH_STATE_ACTIVE		3	/* QH is on the schedule */
+
+struct uhci_qh {
+	/* Hardware fields */
+	__hc32 link;			/* Next QH in the schedule */
+	__hc32 element;			/* Queue element (TD) pointer */
+
+	/* Software fields */
+	dma_addr_t dma_handle;
+
+	struct list_head node;		/* Node in the list of QHs */
+	struct usb_host_endpoint *hep;	/* Endpoint information */
+	struct usb_device *udev;
+	struct list_head queue;		/* Queue of urbps for this QH */
+	struct uhci_td *dummy_td;	/* Dummy TD to end the queue */
+	struct uhci_td *post_td;	/* Last TD completed */
+
+	struct usb_iso_packet_descriptor *iso_packet_desc;
+					/* Next urb->iso_frame_desc entry */
+	unsigned long advance_jiffies;	/* Time of last queue advance */
+	unsigned int unlink_frame;	/* When the QH was unlinked */
+	unsigned int period;		/* For Interrupt and Isochronous QHs */
+	short phase;			/* Between 0 and period-1 */
+	short load;			/* Periodic time requirement, in us */
+	unsigned int iso_frame;		/* Frame # for iso_packet_desc */
+
+	int state;			/* QH_STATE_xxx; see above */
+	int type;			/* Queue type (control, bulk, etc) */
+	int skel;			/* Skeleton queue number */
+
+	unsigned int initial_toggle:1;	/* Endpoint's current toggle value */
+	unsigned int needs_fixup:1;	/* Must fix the TD toggle values */
+	unsigned int is_stopped:1;	/* Queue was stopped by error/unlink */
+	unsigned int wait_expired:1;	/* QH_WAIT_TIMEOUT has expired */
+	unsigned int bandwidth_reserved:1;	/* Periodic bandwidth has
+						 * been allocated */
+} __attribute__((aligned(16)));
+
+/*
+ * We need a special accessor for the element pointer because it is
+ * subject to asynchronous updates by the controller.
+ */
+#define qh_element(qh)		READ_ONCE((qh)->element)
+
+#define LINK_TO_QH(uhci, qh)	(UHCI_PTR_QH((uhci)) | \
+				cpu_to_hc32((uhci), (qh)->dma_handle))
+
+
+/*
+ *	Transfer Descriptors
+ */
+
+/*
+ * for TD <status>:
+ */
+#define TD_CTRL_SPD		(1 << 29)	/* Short Packet Detect */
+#define TD_CTRL_C_ERR_MASK	(3 << 27)	/* Error Counter bits */
+#define TD_CTRL_C_ERR_SHIFT	27
+#define TD_CTRL_LS		(1 << 26)	/* Low Speed Device */
+#define TD_CTRL_IOS		(1 << 25)	/* Isochronous Select */
+#define TD_CTRL_IOC		(1 << 24)	/* Interrupt on Complete */
+#define TD_CTRL_ACTIVE		(1 << 23)	/* TD Active */
+#define TD_CTRL_STALLED		(1 << 22)	/* TD Stalled */
+#define TD_CTRL_DBUFERR		(1 << 21)	/* Data Buffer Error */
+#define TD_CTRL_BABBLE		(1 << 20)	/* Babble Detected */
+#define TD_CTRL_NAK		(1 << 19)	/* NAK Received */
+#define TD_CTRL_CRCTIMEO	(1 << 18)	/* CRC/Time Out Error */
+#define TD_CTRL_BITSTUFF	(1 << 17)	/* Bit Stuff Error */
+#define TD_CTRL_ACTLEN_MASK	0x7FF	/* actual length, encoded as n - 1 */
+
+#define uhci_maxerr(err)		((err) << TD_CTRL_C_ERR_SHIFT)
+#define uhci_status_bits(ctrl_sts)	((ctrl_sts) & 0xF60000)
+#define uhci_actual_length(ctrl_sts)	(((ctrl_sts) + 1) & \
+			TD_CTRL_ACTLEN_MASK)	/* 1-based */
+
+/*
+ * for TD <info>: (a.k.a. Token)
+ */
+#define td_token(uhci, td)	hc32_to_cpu((uhci), (td)->token)
+#define TD_TOKEN_DEVADDR_SHIFT	8
+#define TD_TOKEN_TOGGLE_SHIFT	19
+#define TD_TOKEN_TOGGLE		(1 << 19)
+#define TD_TOKEN_EXPLEN_SHIFT	21
+#define TD_TOKEN_EXPLEN_MASK	0x7FF	/* expected length, encoded as n-1 */
+#define TD_TOKEN_PID_MASK	0xFF
+
+#define uhci_explen(len)	((((len) - 1) & TD_TOKEN_EXPLEN_MASK) << \
+					TD_TOKEN_EXPLEN_SHIFT)
+
+#define uhci_expected_length(token) ((((token) >> TD_TOKEN_EXPLEN_SHIFT) + \
+					1) & TD_TOKEN_EXPLEN_MASK)
+#define uhci_toggle(token)	(((token) >> TD_TOKEN_TOGGLE_SHIFT) & 1)
+#define uhci_endpoint(token)	(((token) >> 15) & 0xf)
+#define uhci_devaddr(token)	(((token) >> TD_TOKEN_DEVADDR_SHIFT) & 0x7f)
+#define uhci_devep(token)	(((token) >> TD_TOKEN_DEVADDR_SHIFT) & 0x7ff)
+#define uhci_packetid(token)	((token) & TD_TOKEN_PID_MASK)
+#define uhci_packetout(token)	(uhci_packetid(token) != USB_PID_IN)
+#define uhci_packetin(token)	(uhci_packetid(token) == USB_PID_IN)
+
+/*
+ * The documentation says "4 words for hardware, 4 words for software".
+ *
+ * That's silly, the hardware doesn't care. The hardware only cares that
+ * the hardware words are 16-byte aligned, and we can have any amount of
+ * sw space after the TD entry.
+ *
+ * td->link points to either another TD (not necessarily for the same urb or
+ * even the same endpoint), or nothing (PTR_TERM), or a QH.
+ */
+struct uhci_td {
+	/* Hardware fields */
+	__hc32 link;
+	__hc32 status;
+	__hc32 token;
+	__hc32 buffer;
+
+	/* Software fields */
+	dma_addr_t dma_handle;
+
+	struct list_head list;
+
+	int frame;			/* for iso: what frame? */
+	struct list_head fl_list;
+} __attribute__((aligned(16)));
+
+/*
+ * We need a special accessor for the control/status word because it is
+ * subject to asynchronous updates by the controller.
+ */
+#define td_status(uhci, td)		hc32_to_cpu((uhci), \
+						READ_ONCE((td)->status))
+
+#define LINK_TO_TD(uhci, td)		(cpu_to_hc32((uhci), (td)->dma_handle))
+
+
+/*
+ *	Skeleton Queue Headers
+ */
+
+/*
+ * The UHCI driver uses QHs with Interrupt, Control and Bulk URBs for
+ * automatic queuing. To make it easy to insert entries into the schedule,
+ * we have a skeleton of QHs for each predefined Interrupt latency.
+ * Asynchronous QHs (low-speed control, full-speed control, and bulk)
+ * go onto the period-1 interrupt list, since they all get accessed on
+ * every frame.
+ *
+ * When we want to add a new QH, we add it to the list starting from the
+ * appropriate skeleton QH.  For instance, the schedule can look like this:
+ *
+ * skel int128 QH
+ * dev 1 interrupt QH
+ * dev 5 interrupt QH
+ * skel int64 QH
+ * skel int32 QH
+ * ...
+ * skel int1 + async QH
+ * dev 5 low-speed control QH
+ * dev 1 bulk QH
+ * dev 2 bulk QH
+ *
+ * There is a special terminating QH used to keep full-speed bandwidth
+ * reclamation active when no full-speed control or bulk QHs are linked
+ * into the schedule.  It has an inactive TD (to work around a PIIX bug,
+ * see the Intel errata) and it points back to itself.
+ *
+ * There's a special skeleton QH for Isochronous QHs which never appears
+ * on the schedule.  Isochronous TDs go on the schedule before the
+ * skeleton QHs.  The hardware accesses them directly rather than
+ * through their QH, which is used only for bookkeeping purposes.
+ * While the UHCI spec doesn't forbid the use of QHs for Isochronous,
+ * it doesn't use them either.  And the spec says that queues never
+ * advance on an error completion status, which makes them totally
+ * unsuitable for Isochronous transfers.
+ *
+ * There's also a special skeleton QH used for QHs which are in the process
+ * of unlinking and so may still be in use by the hardware.  It too never
+ * appears on the schedule.
+ */
+
+#define UHCI_NUM_SKELQH		11
+#define SKEL_UNLINK		0
+#define skel_unlink_qh		skelqh[SKEL_UNLINK]
+#define SKEL_ISO		1
+#define skel_iso_qh		skelqh[SKEL_ISO]
+	/* int128, int64, ..., int1 = 2, 3, ..., 9 */
+#define SKEL_INDEX(exponent)	(9 - exponent)
+#define SKEL_ASYNC		9
+#define skel_async_qh		skelqh[SKEL_ASYNC]
+#define SKEL_TERM		10
+#define skel_term_qh		skelqh[SKEL_TERM]
+
+/* The following entries refer to sublists of skel_async_qh */
+#define SKEL_LS_CONTROL		20
+#define SKEL_FS_CONTROL		21
+#define SKEL_FSBR		SKEL_FS_CONTROL
+#define SKEL_BULK		22
+
+/*
+ *	The UHCI controller and root hub
+ */
+
+/*
+ * States for the root hub:
+ *
+ * To prevent "bouncing" in the presence of electrical noise,
+ * when there are no devices attached we delay for 1 second in the
+ * RUNNING_NODEVS state before switching to the AUTO_STOPPED state.
+ * 
+ * (Note that the AUTO_STOPPED state won't be necessary once the hub
+ * driver learns to autosuspend.)
+ */
+enum uhci_rh_state {
+	/* In the following states the HC must be halted.
+	 * These two must come first. */
+	UHCI_RH_RESET,
+	UHCI_RH_SUSPENDED,
+
+	UHCI_RH_AUTO_STOPPED,
+	UHCI_RH_RESUMING,
+
+	/* In this state the HC changes from running to halted,
+	 * so it can legally appear either way. */
+	UHCI_RH_SUSPENDING,
+
+	/* In the following states it's an error if the HC is halted.
+	 * These two must come last. */
+	UHCI_RH_RUNNING,		/* The normal state */
+	UHCI_RH_RUNNING_NODEVS,		/* Running with no devices attached */
+};
+
+/*
+ * The full UHCI controller information:
+ */
+struct uhci_hcd {
+	/* Grabbed from PCI */
+	unsigned long io_addr;
+
+	/* Used when registers are memory mapped */
+	void __iomem *regs;
+
+	struct dma_pool *qh_pool;
+	struct dma_pool *td_pool;
+
+	struct uhci_td *term_td;	/* Terminating TD, see UHCI bug */
+	struct uhci_qh *skelqh[UHCI_NUM_SKELQH];	/* Skeleton QHs */
+	struct uhci_qh *next_qh;	/* Next QH to scan */
+
+	spinlock_t lock;
+
+	dma_addr_t frame_dma_handle;	/* Hardware frame list */
+	__hc32 *frame;
+	void **frame_cpu;		/* CPU's frame list */
+
+	enum uhci_rh_state rh_state;
+	unsigned long auto_stop_time;		/* When to AUTO_STOP */
+
+	unsigned int frame_number;		/* As of last check */
+	unsigned int is_stopped;
+#define UHCI_IS_STOPPED		9999		/* Larger than a frame # */
+	unsigned int last_iso_frame;		/* Frame of last scan */
+	unsigned int cur_iso_frame;		/* Frame for current scan */
+
+	unsigned int scan_in_progress:1;	/* Schedule scan is running */
+	unsigned int need_rescan:1;		/* Redo the schedule scan */
+	unsigned int dead:1;			/* Controller has died */
+	unsigned int RD_enable:1;		/* Suspended root hub with
+						   Resume-Detect interrupts
+						   enabled */
+	unsigned int is_initialized:1;		/* Data structure is usable */
+	unsigned int fsbr_is_on:1;		/* FSBR is turned on */
+	unsigned int fsbr_is_wanted:1;		/* Does any URB want FSBR? */
+	unsigned int fsbr_expiring:1;		/* FSBR is timing out */
+
+	struct timer_list fsbr_timer;		/* For turning off FBSR */
+
+	/* Silicon quirks */
+	unsigned int oc_low:1;			/* OverCurrent bit active low */
+	unsigned int wait_for_hp:1;		/* Wait for HP port reset */
+	unsigned int big_endian_mmio:1;		/* Big endian registers */
+	unsigned int big_endian_desc:1;		/* Big endian descriptors */
+	unsigned int is_aspeed:1;		/* Aspeed impl. workarounds */
+
+	/* Support for port suspend/resume/reset */
+	unsigned long port_c_suspend;		/* Bit-arrays of ports */
+	unsigned long resuming_ports;
+	unsigned long ports_timeout;		/* Time to stop signalling */
+
+	struct list_head idle_qh_list;		/* Where the idle QHs live */
+
+	int rh_numports;			/* Number of root-hub ports */
+
+	wait_queue_head_t waitqh;		/* endpoint_disable waiters */
+	int num_waiting;			/* Number of waiters */
+
+	int total_load;				/* Sum of array values */
+	short load[MAX_PHASE];			/* Periodic allocations */
+
+	struct clk *clk;			/* (optional) clock source */
+
+	/* Reset host controller */
+	void	(*reset_hc) (struct uhci_hcd *uhci);
+	int	(*check_and_reset_hc) (struct uhci_hcd *uhci);
+	/* configure_hc should perform arch specific settings, if needed */
+	void	(*configure_hc) (struct uhci_hcd *uhci);
+	/* Check for broken resume detect interrupts */
+	int	(*resume_detect_interrupts_are_broken) (struct uhci_hcd *uhci);
+	/* Check for broken global suspend */
+	int	(*global_suspend_mode_is_broken) (struct uhci_hcd *uhci);
+};
+
+/* Convert between a usb_hcd pointer and the corresponding uhci_hcd */
+static inline struct uhci_hcd *hcd_to_uhci(struct usb_hcd *hcd)
+{
+	return (struct uhci_hcd *) (hcd->hcd_priv);
+}
+static inline struct usb_hcd *uhci_to_hcd(struct uhci_hcd *uhci)
+{
+	return container_of((void *) uhci, struct usb_hcd, hcd_priv);
+}
+
+#define uhci_dev(u)	(uhci_to_hcd(u)->self.controller)
+
+/* Utility macro for comparing frame numbers */
+#define uhci_frame_before_eq(f1, f2)	(0 <= (int) ((f2) - (f1)))
+
+
+/*
+ *	Private per-URB data
+ */
+struct urb_priv {
+	struct list_head node;		/* Node in the QH's urbp list */
+
+	struct urb *urb;
+
+	struct uhci_qh *qh;		/* QH for this URB */
+	struct list_head td_list;
+
+	unsigned fsbr:1;		/* URB wants FSBR */
+};
+
+
+/* Some special IDs */
+
+#define PCI_VENDOR_ID_GENESYS		0x17a0
+#define PCI_DEVICE_ID_GL880S_UHCI	0x8083
+
+/* Aspeed SoC needs some quirks */
+static inline bool uhci_is_aspeed(const struct uhci_hcd *uhci)
+{
+	return IS_ENABLED(CONFIG_USB_UHCI_ASPEED) && uhci->is_aspeed;
+}
+
+/*
+ * Functions used to access controller registers. The UCHI spec says that host
+ * controller I/O registers are mapped into PCI I/O space. For non-PCI hosts
+ * we use memory mapped registers.
+ */
+
+#ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC
+/* Support PCI only */
+static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
+{
+	return inl(uhci->io_addr + reg);
+}
+
+static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
+{
+	outl(val, uhci->io_addr + reg);
+}
+
+static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
+{
+	return inw(uhci->io_addr + reg);
+}
+
+static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
+{
+	outw(val, uhci->io_addr + reg);
+}
+
+static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
+{
+	return inb(uhci->io_addr + reg);
+}
+
+static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
+{
+	outb(val, uhci->io_addr + reg);
+}
+
+#else
+/* Support non-PCI host controllers */
+#ifdef CONFIG_USB_PCI
+/* Support PCI and non-PCI host controllers */
+#define uhci_has_pci_registers(u)	((u)->io_addr != 0)
+#else
+/* Support non-PCI host controllers only */
+#define uhci_has_pci_registers(u)	0
+#endif
+
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
+/* Support (non-PCI) big endian host controllers */
+#define uhci_big_endian_mmio(u)		((u)->big_endian_mmio)
+#else
+#define uhci_big_endian_mmio(u)		0
+#endif
+
+static inline int uhci_aspeed_reg(unsigned int reg)
+{
+	switch (reg) {
+	case USBCMD:
+		return 00;
+	case USBSTS:
+		return 0x04;
+	case USBINTR:
+		return 0x08;
+	case USBFRNUM:
+		return 0x80;
+	case USBFLBASEADD:
+		return 0x0c;
+	case USBSOF:
+		return 0x84;
+	case USBPORTSC1:
+		return 0x88;
+	case USBPORTSC2:
+		return 0x8c;
+	case USBPORTSC3:
+		return 0x90;
+	case USBPORTSC4:
+		return 0x94;
+	default:
+		pr_warn("UHCI: Unsupported register 0x%02x on Aspeed\n", reg);
+		/* Return an unimplemented register */
+		return 0x10;
+	}
+}
+
+static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
+{
+	if (uhci_has_pci_registers(uhci))
+		return inl(uhci->io_addr + reg);
+	else if (uhci_is_aspeed(uhci))
+		return readl(uhci->regs + uhci_aspeed_reg(reg));
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
+	else if (uhci_big_endian_mmio(uhci))
+		return readl_be(uhci->regs + reg);
+#endif
+	else
+		return readl(uhci->regs + reg);
+}
+
+static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
+{
+	if (uhci_has_pci_registers(uhci))
+		outl(val, uhci->io_addr + reg);
+	else if (uhci_is_aspeed(uhci))
+		writel(val, uhci->regs + uhci_aspeed_reg(reg));
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
+	else if (uhci_big_endian_mmio(uhci))
+		writel_be(val, uhci->regs + reg);
+#endif
+	else
+		writel(val, uhci->regs + reg);
+}
+
+static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
+{
+	if (uhci_has_pci_registers(uhci))
+		return inw(uhci->io_addr + reg);
+	else if (uhci_is_aspeed(uhci))
+		return readl(uhci->regs + uhci_aspeed_reg(reg));
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
+	else if (uhci_big_endian_mmio(uhci))
+		return readw_be(uhci->regs + reg);
+#endif
+	else
+		return readw(uhci->regs + reg);
+}
+
+static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
+{
+	if (uhci_has_pci_registers(uhci))
+		outw(val, uhci->io_addr + reg);
+	else if (uhci_is_aspeed(uhci))
+		writel(val, uhci->regs + uhci_aspeed_reg(reg));
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
+	else if (uhci_big_endian_mmio(uhci))
+		writew_be(val, uhci->regs + reg);
+#endif
+	else
+		writew(val, uhci->regs + reg);
+}
+
+static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
+{
+	if (uhci_has_pci_registers(uhci))
+		return inb(uhci->io_addr + reg);
+	else if (uhci_is_aspeed(uhci))
+		return readl(uhci->regs + uhci_aspeed_reg(reg));
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
+	else if (uhci_big_endian_mmio(uhci))
+		return readb_be(uhci->regs + reg);
+#endif
+	else
+		return readb(uhci->regs + reg);
+}
+
+static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
+{
+	if (uhci_has_pci_registers(uhci))
+		outb(val, uhci->io_addr + reg);
+	else if (uhci_is_aspeed(uhci))
+		writel(val, uhci->regs + uhci_aspeed_reg(reg));
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
+	else if (uhci_big_endian_mmio(uhci))
+		writeb_be(val, uhci->regs + reg);
+#endif
+	else
+		writeb(val, uhci->regs + reg);
+}
+#endif /* CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC */
+
+/*
+ * The GRLIB GRUSBHC controller can use big endian format for its descriptors.
+ *
+ * UHCI controllers accessed through PCI work normally (little-endian
+ * everywhere), so we don't bother supporting a BE-only mode.
+ */
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_DESC
+#define uhci_big_endian_desc(u)		((u)->big_endian_desc)
+
+/* cpu to uhci */
+static inline __hc32 cpu_to_hc32(const struct uhci_hcd *uhci, const u32 x)
+{
+	return uhci_big_endian_desc(uhci)
+		? (__force __hc32)cpu_to_be32(x)
+		: (__force __hc32)cpu_to_le32(x);
+}
+
+/* uhci to cpu */
+static inline u32 hc32_to_cpu(const struct uhci_hcd *uhci, const __hc32 x)
+{
+	return uhci_big_endian_desc(uhci)
+		? be32_to_cpu((__force __be32)x)
+		: le32_to_cpu((__force __le32)x);
+}
+
+#else
+/* cpu to uhci */
+static inline __hc32 cpu_to_hc32(const struct uhci_hcd *uhci, const u32 x)
+{
+	return cpu_to_le32(x);
+}
+
+/* uhci to cpu */
+static inline u32 hc32_to_cpu(const struct uhci_hcd *uhci, const __hc32 x)
+{
+	return le32_to_cpu(x);
+}
+#endif
+
+#endif
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
new file mode 100644
index 000000000..47106dd8c
--- /dev/null
+++ b/drivers/usb/host/uhci-hub.c
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Universal Host Controller Interface driver for USB.
+ *
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
+ *
+ * (C) Copyright 1999 Linus Torvalds
+ * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
+ * (C) Copyright 1999 Randy Dunlap
+ * (C) Copyright 1999 Georg Acher, acher@in.tum.de
+ * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
+ * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
+ * (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu
+ */
+
+static const __u8 root_hub_hub_des[] =
+{
+	0x09,			/*  __u8  bLength; */
+	USB_DT_HUB,		/*  __u8  bDescriptorType; Hub-descriptor */
+	0x02,			/*  __u8  bNbrPorts; */
+	HUB_CHAR_NO_LPSM |	/* __u16  wHubCharacteristics; */
+		HUB_CHAR_INDV_PORT_OCPM, /* (per-port OC, no power switching) */
+	0x00,
+	0x01,			/*  __u8  bPwrOn2pwrGood; 2ms */
+	0x00,			/*  __u8  bHubContrCurrent; 0 mA */
+	0x00,			/*  __u8  DeviceRemovable; *** 7 Ports max */
+	0xff			/*  __u8  PortPwrCtrlMask; *** 7 ports max */
+};
+
+#define	UHCI_RH_MAXCHILD	7
+
+/* must write as zeroes */
+#define WZ_BITS		(USBPORTSC_RES2 | USBPORTSC_RES3 | USBPORTSC_RES4)
+
+/* status change bits:  nonzero writes will clear */
+#define RWC_BITS	(USBPORTSC_OCC | USBPORTSC_PEC | USBPORTSC_CSC)
+
+/* suspend/resume bits: port suspended or port resuming */
+#define SUSPEND_BITS	(USBPORTSC_SUSP | USBPORTSC_RD)
+
+/* A port that either is connected or has a changed-bit set will prevent
+ * us from AUTO_STOPPING.
+ */
+static int any_ports_active(struct uhci_hcd *uhci)
+{
+	int port;
+
+	for (port = 0; port < uhci->rh_numports; ++port) {
+		if ((uhci_readw(uhci, USBPORTSC1 + port * 2) &
+				(USBPORTSC_CCS | RWC_BITS)) ||
+				test_bit(port, &uhci->port_c_suspend))
+			return 1;
+	}
+	return 0;
+}
+
+static inline int get_hub_status_data(struct uhci_hcd *uhci, char *buf)
+{
+	int port;
+	int mask = RWC_BITS;
+
+	/* Some boards (both VIA and Intel apparently) report bogus
+	 * overcurrent indications, causing massive log spam unless
+	 * we completely ignore them.  This doesn't seem to be a problem
+	 * with the chipset so much as with the way it is connected on
+	 * the motherboard; if the overcurrent input is left to float
+	 * then it may constantly register false positives. */
+	if (ignore_oc)
+		mask &= ~USBPORTSC_OCC;
+
+	*buf = 0;
+	for (port = 0; port < uhci->rh_numports; ++port) {
+		if ((uhci_readw(uhci, USBPORTSC1 + port * 2) & mask) ||
+				test_bit(port, &uhci->port_c_suspend))
+			*buf |= (1 << (port + 1));
+	}
+	return !!*buf;
+}
+
+#define CLR_RH_PORTSTAT(x) \
+	status = uhci_readw(uhci, port_addr);	\
+	status &= ~(RWC_BITS|WZ_BITS); \
+	status &= ~(x); \
+	status |= RWC_BITS & (x); \
+	uhci_writew(uhci, status, port_addr)
+
+#define SET_RH_PORTSTAT(x) \
+	status = uhci_readw(uhci, port_addr);	\
+	status |= (x); \
+	status &= ~(RWC_BITS|WZ_BITS); \
+	uhci_writew(uhci, status, port_addr)
+
+/* UHCI controllers don't automatically stop resume signalling after 20 msec,
+ * so we have to poll and check timeouts in order to take care of it.
+ */
+static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
+		unsigned long port_addr)
+{
+	int status;
+	int i;
+
+	if (uhci_readw(uhci, port_addr) & SUSPEND_BITS) {
+		CLR_RH_PORTSTAT(SUSPEND_BITS);
+		if (test_bit(port, &uhci->resuming_ports))
+			set_bit(port, &uhci->port_c_suspend);
+
+		/* The controller won't actually turn off the RD bit until
+		 * it has had a chance to send a low-speed EOP sequence,
+		 * which is supposed to take 3 bit times (= 2 microseconds).
+		 * Experiments show that some controllers take longer, so
+		 * we'll poll for completion. */
+		for (i = 0; i < 10; ++i) {
+			if (!(uhci_readw(uhci, port_addr) & SUSPEND_BITS))
+				break;
+			udelay(1);
+		}
+	}
+	clear_bit(port, &uhci->resuming_ports);
+	usb_hcd_end_port_resume(&uhci_to_hcd(uhci)->self, port);
+}
+
+/* Wait for the UHCI controller in HP's iLO2 server management chip.
+ * It can take up to 250 us to finish a reset and set the CSC bit.
+ */
+static void wait_for_HP(struct uhci_hcd *uhci, unsigned long port_addr)
+{
+	int i;
+
+	for (i = 10; i < 250; i += 10) {
+		if (uhci_readw(uhci, port_addr) & USBPORTSC_CSC)
+			return;
+		udelay(10);
+	}
+	/* Log a warning? */
+}
+
+static void uhci_check_ports(struct uhci_hcd *uhci)
+{
+	unsigned int port;
+	unsigned long port_addr;
+	int status;
+
+	for (port = 0; port < uhci->rh_numports; ++port) {
+		port_addr = USBPORTSC1 + 2 * port;
+		status = uhci_readw(uhci, port_addr);
+		if (unlikely(status & USBPORTSC_PR)) {
+			if (time_after_eq(jiffies, uhci->ports_timeout)) {
+				CLR_RH_PORTSTAT(USBPORTSC_PR);
+				udelay(10);
+
+				/* HP's server management chip requires
+				 * a longer delay. */
+				if (uhci->wait_for_hp)
+					wait_for_HP(uhci, port_addr);
+
+				/* If the port was enabled before, turning
+				 * reset on caused a port enable change.
+				 * Turning reset off causes a port connect
+				 * status change.  Clear these changes. */
+				CLR_RH_PORTSTAT(USBPORTSC_CSC | USBPORTSC_PEC);
+				SET_RH_PORTSTAT(USBPORTSC_PE);
+			}
+		}
+		if (unlikely(status & USBPORTSC_RD)) {
+			if (!test_bit(port, &uhci->resuming_ports)) {
+
+				/* Port received a wakeup request */
+				set_bit(port, &uhci->resuming_ports);
+				uhci->ports_timeout = jiffies +
+					msecs_to_jiffies(USB_RESUME_TIMEOUT);
+				usb_hcd_start_port_resume(
+						&uhci_to_hcd(uhci)->self, port);
+
+				/* Make sure we see the port again
+				 * after the resuming period is over. */
+				mod_timer(&uhci_to_hcd(uhci)->rh_timer,
+						uhci->ports_timeout);
+			} else if (time_after_eq(jiffies,
+						uhci->ports_timeout)) {
+				uhci_finish_suspend(uhci, port, port_addr);
+			}
+		}
+	}
+}
+
+static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	unsigned long flags;
+	int status = 0;
+
+	spin_lock_irqsave(&uhci->lock, flags);
+
+	uhci_scan_schedule(uhci);
+	if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
+		goto done;
+	uhci_check_ports(uhci);
+
+	status = get_hub_status_data(uhci, buf);
+
+	switch (uhci->rh_state) {
+	    case UHCI_RH_SUSPENDED:
+		/* if port change, ask to be resumed */
+		if (status || uhci->resuming_ports) {
+			status = 1;
+			usb_hcd_resume_root_hub(hcd);
+		}
+		break;
+
+	    case UHCI_RH_AUTO_STOPPED:
+		/* if port change, auto start */
+		if (status)
+			wakeup_rh(uhci);
+		break;
+
+	    case UHCI_RH_RUNNING:
+		/* are any devices attached? */
+		if (!any_ports_active(uhci)) {
+			uhci->rh_state = UHCI_RH_RUNNING_NODEVS;
+			uhci->auto_stop_time = jiffies + HZ;
+		}
+		break;
+
+	    case UHCI_RH_RUNNING_NODEVS:
+		/* auto-stop if nothing connected for 1 second */
+		if (any_ports_active(uhci))
+			uhci->rh_state = UHCI_RH_RUNNING;
+		else if (time_after_eq(jiffies, uhci->auto_stop_time) &&
+				!uhci->wait_for_hp)
+			suspend_rh(uhci, UHCI_RH_AUTO_STOPPED);
+		break;
+
+	    default:
+		break;
+	}
+
+done:
+	spin_unlock_irqrestore(&uhci->lock, flags);
+	return status;
+}
+
+/* size of returned buffer is part of USB spec */
+static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+			u16 wIndex, char *buf, u16 wLength)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	int status, lstatus, retval = 0;
+	unsigned int port = wIndex - 1;
+	unsigned long port_addr = USBPORTSC1 + 2 * port;
+	u16 wPortChange, wPortStatus;
+	unsigned long flags;
+
+	if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
+		return -ETIMEDOUT;
+
+	spin_lock_irqsave(&uhci->lock, flags);
+	switch (typeReq) {
+
+	case GetHubStatus:
+		*(__le32 *)buf = cpu_to_le32(0);
+		retval = 4; /* hub power */
+		break;
+	case GetPortStatus:
+		if (port >= uhci->rh_numports)
+			goto err;
+
+		uhci_check_ports(uhci);
+		status = uhci_readw(uhci, port_addr);
+
+		/* Intel controllers report the OverCurrent bit active on.
+		 * VIA controllers report it active off, so we'll adjust the
+		 * bit value.  (It's not standardized in the UHCI spec.)
+		 */
+		if (uhci->oc_low)
+			status ^= USBPORTSC_OC;
+
+		/* UHCI doesn't support C_RESET (always false) */
+		wPortChange = lstatus = 0;
+		if (status & USBPORTSC_CSC)
+			wPortChange |= USB_PORT_STAT_C_CONNECTION;
+		if (status & USBPORTSC_PEC)
+			wPortChange |= USB_PORT_STAT_C_ENABLE;
+		if ((status & USBPORTSC_OCC) && !ignore_oc)
+			wPortChange |= USB_PORT_STAT_C_OVERCURRENT;
+
+		if (test_bit(port, &uhci->port_c_suspend)) {
+			wPortChange |= USB_PORT_STAT_C_SUSPEND;
+			lstatus |= 1;
+		}
+		if (test_bit(port, &uhci->resuming_ports))
+			lstatus |= 4;
+
+		/* UHCI has no power switching (always on) */
+		wPortStatus = USB_PORT_STAT_POWER;
+		if (status & USBPORTSC_CCS)
+			wPortStatus |= USB_PORT_STAT_CONNECTION;
+		if (status & USBPORTSC_PE) {
+			wPortStatus |= USB_PORT_STAT_ENABLE;
+			if (status & SUSPEND_BITS)
+				wPortStatus |= USB_PORT_STAT_SUSPEND;
+		}
+		if (status & USBPORTSC_OC)
+			wPortStatus |= USB_PORT_STAT_OVERCURRENT;
+		if (status & USBPORTSC_PR)
+			wPortStatus |= USB_PORT_STAT_RESET;
+		if (status & USBPORTSC_LSDA)
+			wPortStatus |= USB_PORT_STAT_LOW_SPEED;
+
+		if (wPortChange)
+			dev_dbg(uhci_dev(uhci), "port %d portsc %04x,%02x\n",
+					wIndex, status, lstatus);
+
+		*(__le16 *)buf = cpu_to_le16(wPortStatus);
+		*(__le16 *)(buf + 2) = cpu_to_le16(wPortChange);
+		retval = 4;
+		break;
+	case SetHubFeature:		/* We don't implement these */
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto err;
+		}
+		break;
+	case SetPortFeature:
+		if (port >= uhci->rh_numports)
+			goto err;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			SET_RH_PORTSTAT(USBPORTSC_SUSP);
+			break;
+		case USB_PORT_FEAT_RESET:
+			SET_RH_PORTSTAT(USBPORTSC_PR);
+
+			/* Reset terminates Resume signalling */
+			uhci_finish_suspend(uhci, port, port_addr);
+
+			/* USB v2.0 7.1.7.5 */
+			uhci->ports_timeout = jiffies +
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
+			break;
+		case USB_PORT_FEAT_POWER:
+			/* UHCI has no power switching */
+			break;
+		default:
+			goto err;
+		}
+		break;
+	case ClearPortFeature:
+		if (port >= uhci->rh_numports)
+			goto err;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			CLR_RH_PORTSTAT(USBPORTSC_PE);
+
+			/* Disable terminates Resume signalling */
+			uhci_finish_suspend(uhci, port, port_addr);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			CLR_RH_PORTSTAT(USBPORTSC_PEC);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			if (!(uhci_readw(uhci, port_addr) & USBPORTSC_SUSP)) {
+
+				/* Make certain the port isn't suspended */
+				uhci_finish_suspend(uhci, port, port_addr);
+			} else if (!test_and_set_bit(port,
+						&uhci->resuming_ports)) {
+				SET_RH_PORTSTAT(USBPORTSC_RD);
+
+				/* The controller won't allow RD to be set
+				 * if the port is disabled.  When this happens
+				 * just skip the Resume signalling.
+				 */
+				if (!(uhci_readw(uhci, port_addr) &
+						USBPORTSC_RD))
+					uhci_finish_suspend(uhci, port,
+							port_addr);
+				else
+					/* USB v2.0 7.1.7.7 */
+					uhci->ports_timeout = jiffies +
+						msecs_to_jiffies(20);
+			}
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			clear_bit(port, &uhci->port_c_suspend);
+			break;
+		case USB_PORT_FEAT_POWER:
+			/* UHCI has no power switching */
+			goto err;
+		case USB_PORT_FEAT_C_CONNECTION:
+			CLR_RH_PORTSTAT(USBPORTSC_CSC);
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			CLR_RH_PORTSTAT(USBPORTSC_OCC);
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			/* this driver won't report these */
+			break;
+		default:
+			goto err;
+		}
+		break;
+	case GetHubDescriptor:
+		retval = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
+		memcpy(buf, root_hub_hub_des, retval);
+		if (retval > 2)
+			buf[2] = uhci->rh_numports;
+		break;
+	default:
+err:
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&uhci->lock, flags);
+
+	return retval;
+}
diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c
new file mode 100644
index 000000000..7bd2fddde
--- /dev/null
+++ b/drivers/usb/host/uhci-pci.c
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * UHCI HCD (Host Controller Driver) PCI Bus Glue.
+ *
+ * Extracted from uhci-hcd.c:
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
+ *
+ * (C) Copyright 1999 Linus Torvalds
+ * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
+ * (C) Copyright 1999 Randy Dunlap
+ * (C) Copyright 1999 Georg Acher, acher@in.tum.de
+ * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
+ * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
+ * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
+ * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
+ *               support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
+ * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
+ * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
+ */
+
+#include "pci-quirks.h"
+
+/*
+ * Make sure the controller is completely inactive, unable to
+ * generate interrupts or do DMA.
+ */
+static void uhci_pci_reset_hc(struct uhci_hcd *uhci)
+{
+	uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr);
+}
+
+/*
+ * Initialize a controller that was newly discovered or has just been
+ * resumed.  In either case we can't be sure of its previous state.
+ *
+ * Returns: 1 if the controller was reset, 0 otherwise.
+ */
+static int uhci_pci_check_and_reset_hc(struct uhci_hcd *uhci)
+{
+	return uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)),
+				uhci->io_addr);
+}
+
+/*
+ * Store the basic register settings needed by the controller.
+ * This function is called at the end of configure_hc in uhci-hcd.c.
+ */
+static void uhci_pci_configure_hc(struct uhci_hcd *uhci)
+{
+	struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci));
+
+	/* Enable PIRQ */
+	pci_write_config_word(pdev, USBLEGSUP, USBLEGSUP_DEFAULT);
+
+	/* Disable platform-specific non-PME# wakeup */
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+		pci_write_config_byte(pdev, USBRES_INTEL, 0);
+}
+
+static int uhci_pci_resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
+{
+	int port;
+
+	switch (to_pci_dev(uhci_dev(uhci))->vendor) {
+	default:
+		break;
+
+	case PCI_VENDOR_ID_GENESYS:
+		/* Genesys Logic's GL880S controllers don't generate
+		 * resume-detect interrupts.
+		 */
+		return 1;
+
+	case PCI_VENDOR_ID_INTEL:
+		/* Some of Intel's USB controllers have a bug that causes
+		 * resume-detect interrupts if any port has an over-current
+		 * condition.  To make matters worse, some motherboards
+		 * hardwire unused USB ports' over-current inputs active!
+		 * To prevent problems, we will not enable resume-detect
+		 * interrupts if any ports are OC.
+		 */
+		for (port = 0; port < uhci->rh_numports; ++port) {
+			if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
+					USBPORTSC_OC)
+				return 1;
+		}
+		break;
+	}
+	return 0;
+}
+
+static int uhci_pci_global_suspend_mode_is_broken(struct uhci_hcd *uhci)
+{
+	int port;
+	const char *sys_info;
+	static const char bad_Asus_board[] = "A7V8X";
+
+	/* One of Asus's motherboards has a bug which causes it to
+	 * wake up immediately from suspend-to-RAM if any of the ports
+	 * are connected.  In such cases we will not set EGSM.
+	 */
+	sys_info = dmi_get_system_info(DMI_BOARD_NAME);
+	if (sys_info && !strcmp(sys_info, bad_Asus_board)) {
+		for (port = 0; port < uhci->rh_numports; ++port) {
+			if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
+					USBPORTSC_CCS)
+				return 1;
+		}
+	}
+
+	return 0;
+}
+
+static int uhci_pci_init(struct usb_hcd *hcd)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+
+	uhci->io_addr = (unsigned long) hcd->rsrc_start;
+
+	uhci->rh_numports = uhci_count_ports(hcd);
+
+	/*
+	 * Intel controllers report the OverCurrent bit active on.  VIA
+	 * and ZHAOXIN controllers report it active off, so we'll adjust
+	 * the bit value.  (It's not standardized in the UHCI spec.)
+	 */
+	if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA ||
+			to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_ZHAOXIN)
+		uhci->oc_low = 1;
+
+	/* HP's server management chip requires a longer port reset delay. */
+	if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_HP)
+		uhci->wait_for_hp = 1;
+
+	/* Intel controllers use non-PME wakeup signalling */
+	if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_INTEL)
+		device_set_wakeup_capable(uhci_dev(uhci), true);
+
+	/* Set up pointers to PCI-specific functions */
+	uhci->reset_hc = uhci_pci_reset_hc;
+	uhci->check_and_reset_hc = uhci_pci_check_and_reset_hc;
+	uhci->configure_hc = uhci_pci_configure_hc;
+	uhci->resume_detect_interrupts_are_broken =
+		uhci_pci_resume_detect_interrupts_are_broken;
+	uhci->global_suspend_mode_is_broken =
+		uhci_pci_global_suspend_mode_is_broken;
+
+
+	/* Kick BIOS off this hardware and reset if the controller
+	 * isn't already safely quiescent.
+	 */
+	check_and_reset_hc(uhci);
+	return 0;
+}
+
+/* Make sure the controller is quiescent and that we're not using it
+ * any more.  This is mainly for the benefit of programs which, like kexec,
+ * expect the hardware to be idle: not doing DMA or generating IRQs.
+ *
+ * This routine may be called in a damaged or failing kernel.  Hence we
+ * do not acquire the spinlock before shutting down the controller.
+ */
+static void uhci_shutdown(struct pci_dev *pdev)
+{
+	struct usb_hcd *hcd = pci_get_drvdata(pdev);
+
+	uhci_hc_died(hcd_to_uhci(hcd));
+}
+
+#ifdef CONFIG_PM
+
+static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated);
+
+static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci));
+	int rc = 0;
+
+	dev_dbg(uhci_dev(uhci), "%s\n", __func__);
+
+	spin_lock_irq(&uhci->lock);
+	if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
+		goto done_okay;		/* Already suspended or dead */
+
+	/* All PCI host controllers are required to disable IRQ generation
+	 * at the source, so we must turn off PIRQ.
+	 */
+	pci_write_config_word(pdev, USBLEGSUP, 0);
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+	/* Enable platform-specific non-PME# wakeup */
+	if (do_wakeup) {
+		if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+			pci_write_config_byte(pdev, USBRES_INTEL,
+					USBPORT1EN | USBPORT2EN);
+	}
+
+done_okay:
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	spin_unlock_irq(&uhci->lock);
+
+	synchronize_irq(hcd->irq);
+
+	/* Check for race with a wakeup request */
+	if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) {
+		uhci_pci_resume(hcd, false);
+		rc = -EBUSY;
+	}
+	return rc;
+}
+
+static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+
+	dev_dbg(uhci_dev(uhci), "%s\n", __func__);
+
+	/* Since we aren't in D3 any more, it's safe to set this flag
+	 * even if the controller was dead.
+	 */
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	spin_lock_irq(&uhci->lock);
+
+	/* Make sure resume from hibernation re-enumerates everything */
+	if (hibernated) {
+		uhci->reset_hc(uhci);
+		finish_reset(uhci);
+	}
+
+	/* The firmware may have changed the controller settings during
+	 * a system wakeup.  Check it and reconfigure to avoid problems.
+	 */
+	else {
+		check_and_reset_hc(uhci);
+	}
+	configure_hc(uhci);
+
+	/* Tell the core if the controller had to be reset */
+	if (uhci->rh_state == UHCI_RH_RESET)
+		usb_root_hub_lost_power(hcd->self.root_hub);
+
+	spin_unlock_irq(&uhci->lock);
+
+	/* If interrupts don't work and remote wakeup is enabled then
+	 * the suspended root hub needs to be polled.
+	 */
+	if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup)
+		set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+	/* Does the root hub have a port wakeup pending? */
+	usb_hcd_poll_rh_status(hcd);
+	return 0;
+}
+
+#endif
+
+static const struct hc_driver uhci_driver = {
+	.description =		hcd_name,
+	.product_desc =		"UHCI Host Controller",
+	.hcd_priv_size =	sizeof(struct uhci_hcd),
+
+	/* Generic hardware linkage */
+	.irq =			uhci_irq,
+	.flags =		HCD_DMA | HCD_USB11,
+
+	/* Basic lifecycle operations */
+	.reset =		uhci_pci_init,
+	.start =		uhci_start,
+#ifdef CONFIG_PM
+	.pci_suspend =		uhci_pci_suspend,
+	.pci_resume =		uhci_pci_resume,
+	.bus_suspend =		uhci_rh_suspend,
+	.bus_resume =		uhci_rh_resume,
+#endif
+	.stop =			uhci_stop,
+
+	.urb_enqueue =		uhci_urb_enqueue,
+	.urb_dequeue =		uhci_urb_dequeue,
+
+	.endpoint_disable =	uhci_hcd_endpoint_disable,
+	.get_frame_number =	uhci_hcd_get_frame_number,
+
+	.hub_status_data =	uhci_hub_status_data,
+	.hub_control =		uhci_hub_control,
+};
+
+static const struct pci_device_id uhci_pci_ids[] = { {
+	/* handle any USB UHCI controller */
+	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_UHCI, ~0),
+	}, { /* end: all zeroes */ }
+};
+
+MODULE_DEVICE_TABLE(pci, uhci_pci_ids);
+
+static int uhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	return usb_hcd_pci_probe(dev, &uhci_driver);
+}
+
+static struct pci_driver uhci_pci_driver = {
+	.name =		hcd_name,
+	.id_table =	uhci_pci_ids,
+
+	.probe =	uhci_pci_probe,
+	.remove =	usb_hcd_pci_remove,
+	.shutdown =	uhci_shutdown,
+
+#ifdef CONFIG_PM
+	.driver =	{
+		.pm =	&usb_hcd_pci_pm_ops
+	},
+#endif
+};
+
+MODULE_SOFTDEP("pre: ehci_pci");
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
new file mode 100644
index 000000000..b2049b47a
--- /dev/null
+++ b/drivers/usb/host/uhci-platform.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Generic UHCI HCD (Host Controller Driver) for Platform Devices
+ *
+ * Copyright (c) 2011 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This file is based on uhci-grlib.c
+ * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
+ */
+
+#include <linux/of.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+static int uhci_platform_init(struct usb_hcd *hcd)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+
+	/* Probe number of ports if not already provided by DT */
+	if (!uhci->rh_numports)
+		uhci->rh_numports = uhci_count_ports(hcd);
+
+	/* Set up pointers to to generic functions */
+	uhci->reset_hc = uhci_generic_reset_hc;
+	uhci->check_and_reset_hc = uhci_generic_check_and_reset_hc;
+
+	/* No special actions need to be taken for the functions below */
+	uhci->configure_hc = NULL;
+	uhci->resume_detect_interrupts_are_broken = NULL;
+	uhci->global_suspend_mode_is_broken = NULL;
+
+	/* Reset if the controller isn't already safely quiescent. */
+	check_and_reset_hc(uhci);
+	return 0;
+}
+
+static const struct hc_driver uhci_platform_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"Generic UHCI Host Controller",
+	.hcd_priv_size =	sizeof(struct uhci_hcd),
+
+	/* Generic hardware linkage */
+	.irq =			uhci_irq,
+	.flags =		HCD_MEMORY | HCD_DMA | HCD_USB11,
+
+	/* Basic lifecycle operations */
+	.reset =		uhci_platform_init,
+	.start =		uhci_start,
+#ifdef CONFIG_PM
+	.pci_suspend =		NULL,
+	.pci_resume =		NULL,
+	.bus_suspend =		uhci_rh_suspend,
+	.bus_resume =		uhci_rh_resume,
+#endif
+	.stop =			uhci_stop,
+
+	.urb_enqueue =		uhci_urb_enqueue,
+	.urb_dequeue =		uhci_urb_dequeue,
+
+	.endpoint_disable =	uhci_hcd_endpoint_disable,
+	.get_frame_number =	uhci_hcd_get_frame_number,
+
+	.hub_status_data =	uhci_hub_status_data,
+	.hub_control =		uhci_hub_control,
+};
+
+static int uhci_hcd_platform_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct usb_hcd *hcd;
+	struct uhci_hcd	*uhci;
+	struct resource *res;
+	int ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	/*
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev,
+			pdev->name);
+	if (!hcd)
+		return -ENOMEM;
+
+	uhci = hcd_to_uhci(hcd);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(hcd->regs)) {
+		ret = PTR_ERR(hcd->regs);
+		goto err_rmr;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	uhci->regs = hcd->regs;
+
+	/* Grab some things from the device-tree */
+	if (np) {
+		u32 num_ports;
+
+		if (of_property_read_u32(np, "#ports", &num_ports) == 0) {
+			uhci->rh_numports = num_ports;
+			dev_info(&pdev->dev,
+				"Detected %d ports from device-tree\n",
+				num_ports);
+		}
+		if (of_device_is_compatible(np, "aspeed,ast2400-uhci") ||
+		    of_device_is_compatible(np, "aspeed,ast2500-uhci") ||
+		    of_device_is_compatible(np, "aspeed,ast2600-uhci")) {
+			uhci->is_aspeed = 1;
+			dev_info(&pdev->dev,
+				 "Enabled Aspeed implementation workarounds\n");
+		}
+	}
+
+	/* Get and enable clock if any specified */
+	uhci->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(uhci->clk)) {
+		ret = PTR_ERR(uhci->clk);
+		goto err_rmr;
+	}
+	ret = clk_prepare_enable(uhci->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", ret);
+		goto err_rmr;
+	}
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		goto err_clk;
+
+	ret = usb_add_hcd(hcd, ret, IRQF_SHARED);
+	if (ret)
+		goto err_clk;
+
+	device_wakeup_enable(hcd->self.controller);
+	return 0;
+
+err_clk:
+	clk_disable_unprepare(uhci->clk);
+err_rmr:
+	usb_put_hcd(hcd);
+
+	return ret;
+}
+
+static int uhci_hcd_platform_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+
+	clk_disable_unprepare(uhci->clk);
+	usb_remove_hcd(hcd);
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+/* Make sure the controller is quiescent and that we're not using it
+ * any more.  This is mainly for the benefit of programs which, like kexec,
+ * expect the hardware to be idle: not doing DMA or generating IRQs.
+ *
+ * This routine may be called in a damaged or failing kernel.  Hence we
+ * do not acquire the spinlock before shutting down the controller.
+ */
+static void uhci_hcd_platform_shutdown(struct platform_device *op)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(op);
+
+	uhci_hc_died(hcd_to_uhci(hcd));
+}
+
+static const struct of_device_id platform_uhci_ids[] = {
+	{ .compatible = "generic-uhci", },
+	{ .compatible = "platform-uhci", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, platform_uhci_ids);
+
+static struct platform_driver uhci_platform_driver = {
+	.probe		= uhci_hcd_platform_probe,
+	.remove		= uhci_hcd_platform_remove,
+	.shutdown	= uhci_hcd_platform_shutdown,
+	.driver = {
+		.name = "platform-uhci",
+		.of_match_table = platform_uhci_ids,
+	},
+};
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
new file mode 100644
index 000000000..35fcb8261
--- /dev/null
+++ b/drivers/usb/host/uhci-q.c
@@ -0,0 +1,1793 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Universal Host Controller Interface driver for USB.
+ *
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
+ *
+ * (C) Copyright 1999 Linus Torvalds
+ * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
+ * (C) Copyright 1999 Randy Dunlap
+ * (C) Copyright 1999 Georg Acher, acher@in.tum.de
+ * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
+ * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
+ * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
+ * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
+ *               support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
+ * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
+ * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
+ */
+
+
+/*
+ * Technically, updating td->status here is a race, but it's not really a
+ * problem. The worst that can happen is that we set the IOC bit again
+ * generating a spurious interrupt. We could fix this by creating another
+ * QH and leaving the IOC bit always set, but then we would have to play
+ * games with the FSBR code to make sure we get the correct order in all
+ * the cases. I don't think it's worth the effort
+ */
+static void uhci_set_next_interrupt(struct uhci_hcd *uhci)
+{
+	if (uhci->is_stopped)
+		mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
+	uhci->term_td->status |= cpu_to_hc32(uhci, TD_CTRL_IOC);
+}
+
+static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci)
+{
+	uhci->term_td->status &= ~cpu_to_hc32(uhci, TD_CTRL_IOC);
+}
+
+
+/*
+ * Full-Speed Bandwidth Reclamation (FSBR).
+ * We turn on FSBR whenever a queue that wants it is advancing,
+ * and leave it on for a short time thereafter.
+ */
+static void uhci_fsbr_on(struct uhci_hcd *uhci)
+{
+	struct uhci_qh *lqh;
+
+	/* The terminating skeleton QH always points back to the first
+	 * FSBR QH.  Make the last async QH point to the terminating
+	 * skeleton QH. */
+	uhci->fsbr_is_on = 1;
+	lqh = list_entry(uhci->skel_async_qh->node.prev,
+			struct uhci_qh, node);
+	lqh->link = LINK_TO_QH(uhci, uhci->skel_term_qh);
+}
+
+static void uhci_fsbr_off(struct uhci_hcd *uhci)
+{
+	struct uhci_qh *lqh;
+
+	/* Remove the link from the last async QH to the terminating
+	 * skeleton QH. */
+	uhci->fsbr_is_on = 0;
+	lqh = list_entry(uhci->skel_async_qh->node.prev,
+			struct uhci_qh, node);
+	lqh->link = UHCI_PTR_TERM(uhci);
+}
+
+static void uhci_add_fsbr(struct uhci_hcd *uhci, struct urb *urb)
+{
+	struct urb_priv *urbp = urb->hcpriv;
+
+	urbp->fsbr = 1;
+}
+
+static void uhci_urbp_wants_fsbr(struct uhci_hcd *uhci, struct urb_priv *urbp)
+{
+	if (urbp->fsbr) {
+		uhci->fsbr_is_wanted = 1;
+		if (!uhci->fsbr_is_on)
+			uhci_fsbr_on(uhci);
+		else if (uhci->fsbr_expiring) {
+			uhci->fsbr_expiring = 0;
+			del_timer(&uhci->fsbr_timer);
+		}
+	}
+}
+
+static void uhci_fsbr_timeout(struct timer_list *t)
+{
+	struct uhci_hcd *uhci = from_timer(uhci, t, fsbr_timer);
+	unsigned long flags;
+
+	spin_lock_irqsave(&uhci->lock, flags);
+	if (uhci->fsbr_expiring) {
+		uhci->fsbr_expiring = 0;
+		uhci_fsbr_off(uhci);
+	}
+	spin_unlock_irqrestore(&uhci->lock, flags);
+}
+
+
+static struct uhci_td *uhci_alloc_td(struct uhci_hcd *uhci)
+{
+	dma_addr_t dma_handle;
+	struct uhci_td *td;
+
+	td = dma_pool_alloc(uhci->td_pool, GFP_ATOMIC, &dma_handle);
+	if (!td)
+		return NULL;
+
+	td->dma_handle = dma_handle;
+	td->frame = -1;
+
+	INIT_LIST_HEAD(&td->list);
+	INIT_LIST_HEAD(&td->fl_list);
+
+	return td;
+}
+
+static void uhci_free_td(struct uhci_hcd *uhci, struct uhci_td *td)
+{
+	if (!list_empty(&td->list))
+		dev_WARN(uhci_dev(uhci), "td %p still in list!\n", td);
+	if (!list_empty(&td->fl_list))
+		dev_WARN(uhci_dev(uhci), "td %p still in fl_list!\n", td);
+
+	dma_pool_free(uhci->td_pool, td, td->dma_handle);
+}
+
+static inline void uhci_fill_td(struct uhci_hcd *uhci, struct uhci_td *td,
+		u32 status, u32 token, u32 buffer)
+{
+	td->status = cpu_to_hc32(uhci, status);
+	td->token = cpu_to_hc32(uhci, token);
+	td->buffer = cpu_to_hc32(uhci, buffer);
+}
+
+static void uhci_add_td_to_urbp(struct uhci_td *td, struct urb_priv *urbp)
+{
+	list_add_tail(&td->list, &urbp->td_list);
+}
+
+static void uhci_remove_td_from_urbp(struct uhci_td *td)
+{
+	list_del_init(&td->list);
+}
+
+/*
+ * We insert Isochronous URBs directly into the frame list at the beginning
+ */
+static inline void uhci_insert_td_in_frame_list(struct uhci_hcd *uhci,
+		struct uhci_td *td, unsigned framenum)
+{
+	framenum &= (UHCI_NUMFRAMES - 1);
+
+	td->frame = framenum;
+
+	/* Is there a TD already mapped there? */
+	if (uhci->frame_cpu[framenum]) {
+		struct uhci_td *ftd, *ltd;
+
+		ftd = uhci->frame_cpu[framenum];
+		ltd = list_entry(ftd->fl_list.prev, struct uhci_td, fl_list);
+
+		list_add_tail(&td->fl_list, &ftd->fl_list);
+
+		td->link = ltd->link;
+		wmb();
+		ltd->link = LINK_TO_TD(uhci, td);
+	} else {
+		td->link = uhci->frame[framenum];
+		wmb();
+		uhci->frame[framenum] = LINK_TO_TD(uhci, td);
+		uhci->frame_cpu[framenum] = td;
+	}
+}
+
+static inline void uhci_remove_td_from_frame_list(struct uhci_hcd *uhci,
+		struct uhci_td *td)
+{
+	/* If it's not inserted, don't remove it */
+	if (td->frame == -1) {
+		WARN_ON(!list_empty(&td->fl_list));
+		return;
+	}
+
+	if (uhci->frame_cpu[td->frame] == td) {
+		if (list_empty(&td->fl_list)) {
+			uhci->frame[td->frame] = td->link;
+			uhci->frame_cpu[td->frame] = NULL;
+		} else {
+			struct uhci_td *ntd;
+
+			ntd = list_entry(td->fl_list.next,
+					 struct uhci_td,
+					 fl_list);
+			uhci->frame[td->frame] = LINK_TO_TD(uhci, ntd);
+			uhci->frame_cpu[td->frame] = ntd;
+		}
+	} else {
+		struct uhci_td *ptd;
+
+		ptd = list_entry(td->fl_list.prev, struct uhci_td, fl_list);
+		ptd->link = td->link;
+	}
+
+	list_del_init(&td->fl_list);
+	td->frame = -1;
+}
+
+static inline void uhci_remove_tds_from_frame(struct uhci_hcd *uhci,
+		unsigned int framenum)
+{
+	struct uhci_td *ftd, *ltd;
+
+	framenum &= (UHCI_NUMFRAMES - 1);
+
+	ftd = uhci->frame_cpu[framenum];
+	if (ftd) {
+		ltd = list_entry(ftd->fl_list.prev, struct uhci_td, fl_list);
+		uhci->frame[framenum] = ltd->link;
+		uhci->frame_cpu[framenum] = NULL;
+
+		while (!list_empty(&ftd->fl_list))
+			list_del_init(ftd->fl_list.prev);
+	}
+}
+
+/*
+ * Remove all the TDs for an Isochronous URB from the frame list
+ */
+static void uhci_unlink_isochronous_tds(struct uhci_hcd *uhci, struct urb *urb)
+{
+	struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv;
+	struct uhci_td *td;
+
+	list_for_each_entry(td, &urbp->td_list, list)
+		uhci_remove_td_from_frame_list(uhci, td);
+}
+
+static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci,
+		struct usb_device *udev, struct usb_host_endpoint *hep)
+{
+	dma_addr_t dma_handle;
+	struct uhci_qh *qh;
+
+	qh = dma_pool_zalloc(uhci->qh_pool, GFP_ATOMIC, &dma_handle);
+	if (!qh)
+		return NULL;
+
+	qh->dma_handle = dma_handle;
+
+	qh->element = UHCI_PTR_TERM(uhci);
+	qh->link = UHCI_PTR_TERM(uhci);
+
+	INIT_LIST_HEAD(&qh->queue);
+	INIT_LIST_HEAD(&qh->node);
+
+	if (udev) {		/* Normal QH */
+		qh->type = usb_endpoint_type(&hep->desc);
+		if (qh->type != USB_ENDPOINT_XFER_ISOC) {
+			qh->dummy_td = uhci_alloc_td(uhci);
+			if (!qh->dummy_td) {
+				dma_pool_free(uhci->qh_pool, qh, dma_handle);
+				return NULL;
+			}
+		}
+		qh->state = QH_STATE_IDLE;
+		qh->hep = hep;
+		qh->udev = udev;
+		hep->hcpriv = qh;
+
+		if (qh->type == USB_ENDPOINT_XFER_INT ||
+				qh->type == USB_ENDPOINT_XFER_ISOC)
+			qh->load = usb_calc_bus_time(udev->speed,
+					usb_endpoint_dir_in(&hep->desc),
+					qh->type == USB_ENDPOINT_XFER_ISOC,
+					usb_endpoint_maxp(&hep->desc))
+				/ 1000 + 1;
+
+	} else {		/* Skeleton QH */
+		qh->state = QH_STATE_ACTIVE;
+		qh->type = -1;
+	}
+	return qh;
+}
+
+static void uhci_free_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	WARN_ON(qh->state != QH_STATE_IDLE && qh->udev);
+	if (!list_empty(&qh->queue))
+		dev_WARN(uhci_dev(uhci), "qh %p list not empty!\n", qh);
+
+	list_del(&qh->node);
+	if (qh->udev) {
+		qh->hep->hcpriv = NULL;
+		if (qh->dummy_td)
+			uhci_free_td(uhci, qh->dummy_td);
+	}
+	dma_pool_free(uhci->qh_pool, qh, qh->dma_handle);
+}
+
+/*
+ * When a queue is stopped and a dequeued URB is given back, adjust
+ * the previous TD link (if the URB isn't first on the queue) or
+ * save its toggle value (if it is first and is currently executing).
+ *
+ * Returns 0 if the URB should not yet be given back, 1 otherwise.
+ */
+static int uhci_cleanup_queue(struct uhci_hcd *uhci, struct uhci_qh *qh,
+		struct urb *urb)
+{
+	struct urb_priv *urbp = urb->hcpriv;
+	struct uhci_td *td;
+	int ret = 1;
+
+	/* Isochronous pipes don't use toggles and their TD link pointers
+	 * get adjusted during uhci_urb_dequeue().  But since their queues
+	 * cannot truly be stopped, we have to watch out for dequeues
+	 * occurring after the nominal unlink frame. */
+	if (qh->type == USB_ENDPOINT_XFER_ISOC) {
+		ret = (uhci->frame_number + uhci->is_stopped !=
+				qh->unlink_frame);
+		goto done;
+	}
+
+	/* If the URB isn't first on its queue, adjust the link pointer
+	 * of the last TD in the previous URB.  The toggle doesn't need
+	 * to be saved since this URB can't be executing yet. */
+	if (qh->queue.next != &urbp->node) {
+		struct urb_priv *purbp;
+		struct uhci_td *ptd;
+
+		purbp = list_entry(urbp->node.prev, struct urb_priv, node);
+		WARN_ON(list_empty(&purbp->td_list));
+		ptd = list_entry(purbp->td_list.prev, struct uhci_td,
+				list);
+		td = list_entry(urbp->td_list.prev, struct uhci_td,
+				list);
+		ptd->link = td->link;
+		goto done;
+	}
+
+	/* If the QH element pointer is UHCI_PTR_TERM then then currently
+	 * executing URB has already been unlinked, so this one isn't it. */
+	if (qh_element(qh) == UHCI_PTR_TERM(uhci))
+		goto done;
+	qh->element = UHCI_PTR_TERM(uhci);
+
+	/* Control pipes don't have to worry about toggles */
+	if (qh->type == USB_ENDPOINT_XFER_CONTROL)
+		goto done;
+
+	/* Save the next toggle value */
+	WARN_ON(list_empty(&urbp->td_list));
+	td = list_entry(urbp->td_list.next, struct uhci_td, list);
+	qh->needs_fixup = 1;
+	qh->initial_toggle = uhci_toggle(td_token(uhci, td));
+
+done:
+	return ret;
+}
+
+/*
+ * Fix up the data toggles for URBs in a queue, when one of them
+ * terminates early (short transfer, error, or dequeued).
+ */
+static void uhci_fixup_toggles(struct uhci_hcd *uhci, struct uhci_qh *qh,
+			int skip_first)
+{
+	struct urb_priv *urbp = NULL;
+	struct uhci_td *td;
+	unsigned int toggle = qh->initial_toggle;
+	unsigned int pipe;
+
+	/* Fixups for a short transfer start with the second URB in the
+	 * queue (the short URB is the first). */
+	if (skip_first)
+		urbp = list_entry(qh->queue.next, struct urb_priv, node);
+
+	/* When starting with the first URB, if the QH element pointer is
+	 * still valid then we know the URB's toggles are okay. */
+	else if (qh_element(qh) != UHCI_PTR_TERM(uhci))
+		toggle = 2;
+
+	/* Fix up the toggle for the URBs in the queue.  Normally this
+	 * loop won't run more than once: When an error or short transfer
+	 * occurs, the queue usually gets emptied. */
+	urbp = list_prepare_entry(urbp, &qh->queue, node);
+	list_for_each_entry_continue(urbp, &qh->queue, node) {
+
+		/* If the first TD has the right toggle value, we don't
+		 * need to change any toggles in this URB */
+		td = list_entry(urbp->td_list.next, struct uhci_td, list);
+		if (toggle > 1 || uhci_toggle(td_token(uhci, td)) == toggle) {
+			td = list_entry(urbp->td_list.prev, struct uhci_td,
+					list);
+			toggle = uhci_toggle(td_token(uhci, td)) ^ 1;
+
+		/* Otherwise all the toggles in the URB have to be switched */
+		} else {
+			list_for_each_entry(td, &urbp->td_list, list) {
+				td->token ^= cpu_to_hc32(uhci,
+							TD_TOKEN_TOGGLE);
+				toggle ^= 1;
+			}
+		}
+	}
+
+	wmb();
+	pipe = list_entry(qh->queue.next, struct urb_priv, node)->urb->pipe;
+	usb_settoggle(qh->udev, usb_pipeendpoint(pipe),
+			usb_pipeout(pipe), toggle);
+	qh->needs_fixup = 0;
+}
+
+/*
+ * Link an Isochronous QH into its skeleton's list
+ */
+static inline void link_iso(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	list_add_tail(&qh->node, &uhci->skel_iso_qh->node);
+
+	/* Isochronous QHs aren't linked by the hardware */
+}
+
+/*
+ * Link a high-period interrupt QH into the schedule at the end of its
+ * skeleton's list
+ */
+static void link_interrupt(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	struct uhci_qh *pqh;
+
+	list_add_tail(&qh->node, &uhci->skelqh[qh->skel]->node);
+
+	pqh = list_entry(qh->node.prev, struct uhci_qh, node);
+	qh->link = pqh->link;
+	wmb();
+	pqh->link = LINK_TO_QH(uhci, qh);
+}
+
+/*
+ * Link a period-1 interrupt or async QH into the schedule at the
+ * correct spot in the async skeleton's list, and update the FSBR link
+ */
+static void link_async(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	struct uhci_qh *pqh;
+	__hc32 link_to_new_qh;
+
+	/* Find the predecessor QH for our new one and insert it in the list.
+	 * The list of QHs is expected to be short, so linear search won't
+	 * take too long. */
+	list_for_each_entry_reverse(pqh, &uhci->skel_async_qh->node, node) {
+		if (pqh->skel <= qh->skel)
+			break;
+	}
+	list_add(&qh->node, &pqh->node);
+
+	/* Link it into the schedule */
+	qh->link = pqh->link;
+	wmb();
+	link_to_new_qh = LINK_TO_QH(uhci, qh);
+	pqh->link = link_to_new_qh;
+
+	/* If this is now the first FSBR QH, link the terminating skeleton
+	 * QH to it. */
+	if (pqh->skel < SKEL_FSBR && qh->skel >= SKEL_FSBR)
+		uhci->skel_term_qh->link = link_to_new_qh;
+}
+
+/*
+ * Put a QH on the schedule in both hardware and software
+ */
+static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	WARN_ON(list_empty(&qh->queue));
+
+	/* Set the element pointer if it isn't set already.
+	 * This isn't needed for Isochronous queues, but it doesn't hurt. */
+	if (qh_element(qh) == UHCI_PTR_TERM(uhci)) {
+		struct urb_priv *urbp = list_entry(qh->queue.next,
+				struct urb_priv, node);
+		struct uhci_td *td = list_entry(urbp->td_list.next,
+				struct uhci_td, list);
+
+		qh->element = LINK_TO_TD(uhci, td);
+	}
+
+	/* Treat the queue as if it has just advanced */
+	qh->wait_expired = 0;
+	qh->advance_jiffies = jiffies;
+
+	if (qh->state == QH_STATE_ACTIVE)
+		return;
+	qh->state = QH_STATE_ACTIVE;
+
+	/* Move the QH from its old list to the correct spot in the appropriate
+	 * skeleton's list */
+	if (qh == uhci->next_qh)
+		uhci->next_qh = list_entry(qh->node.next, struct uhci_qh,
+				node);
+	list_del(&qh->node);
+
+	if (qh->skel == SKEL_ISO)
+		link_iso(uhci, qh);
+	else if (qh->skel < SKEL_ASYNC)
+		link_interrupt(uhci, qh);
+	else
+		link_async(uhci, qh);
+}
+
+/*
+ * Unlink a high-period interrupt QH from the schedule
+ */
+static void unlink_interrupt(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	struct uhci_qh *pqh;
+
+	pqh = list_entry(qh->node.prev, struct uhci_qh, node);
+	pqh->link = qh->link;
+	mb();
+}
+
+/*
+ * Unlink a period-1 interrupt or async QH from the schedule
+ */
+static void unlink_async(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	struct uhci_qh *pqh;
+	__hc32 link_to_next_qh = qh->link;
+
+	pqh = list_entry(qh->node.prev, struct uhci_qh, node);
+	pqh->link = link_to_next_qh;
+
+	/* If this was the old first FSBR QH, link the terminating skeleton
+	 * QH to the next (new first FSBR) QH. */
+	if (pqh->skel < SKEL_FSBR && qh->skel >= SKEL_FSBR)
+		uhci->skel_term_qh->link = link_to_next_qh;
+	mb();
+}
+
+/*
+ * Take a QH off the hardware schedule
+ */
+static void uhci_unlink_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	if (qh->state == QH_STATE_UNLINKING)
+		return;
+	WARN_ON(qh->state != QH_STATE_ACTIVE || !qh->udev);
+	qh->state = QH_STATE_UNLINKING;
+
+	/* Unlink the QH from the schedule and record when we did it */
+	if (qh->skel == SKEL_ISO)
+		;
+	else if (qh->skel < SKEL_ASYNC)
+		unlink_interrupt(uhci, qh);
+	else
+		unlink_async(uhci, qh);
+
+	uhci_get_current_frame_number(uhci);
+	qh->unlink_frame = uhci->frame_number;
+
+	/* Force an interrupt so we know when the QH is fully unlinked */
+	if (list_empty(&uhci->skel_unlink_qh->node) || uhci->is_stopped)
+		uhci_set_next_interrupt(uhci);
+
+	/* Move the QH from its old list to the end of the unlinking list */
+	if (qh == uhci->next_qh)
+		uhci->next_qh = list_entry(qh->node.next, struct uhci_qh,
+				node);
+	list_move_tail(&qh->node, &uhci->skel_unlink_qh->node);
+}
+
+/*
+ * When we and the controller are through with a QH, it becomes IDLE.
+ * This happens when a QH has been off the schedule (on the unlinking
+ * list) for more than one frame, or when an error occurs while adding
+ * the first URB onto a new QH.
+ */
+static void uhci_make_qh_idle(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	WARN_ON(qh->state == QH_STATE_ACTIVE);
+
+	if (qh == uhci->next_qh)
+		uhci->next_qh = list_entry(qh->node.next, struct uhci_qh,
+				node);
+	list_move(&qh->node, &uhci->idle_qh_list);
+	qh->state = QH_STATE_IDLE;
+
+	/* Now that the QH is idle, its post_td isn't being used */
+	if (qh->post_td) {
+		uhci_free_td(uhci, qh->post_td);
+		qh->post_td = NULL;
+	}
+
+	/* If anyone is waiting for a QH to become idle, wake them up */
+	if (uhci->num_waiting)
+		wake_up_all(&uhci->waitqh);
+}
+
+/*
+ * Find the highest existing bandwidth load for a given phase and period.
+ */
+static int uhci_highest_load(struct uhci_hcd *uhci, int phase, int period)
+{
+	int highest_load = uhci->load[phase];
+
+	for (phase += period; phase < MAX_PHASE; phase += period)
+		highest_load = max_t(int, highest_load, uhci->load[phase]);
+	return highest_load;
+}
+
+/*
+ * Set qh->phase to the optimal phase for a periodic transfer and
+ * check whether the bandwidth requirement is acceptable.
+ */
+static int uhci_check_bandwidth(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	int minimax_load;
+
+	/* Find the optimal phase (unless it is already set) and get
+	 * its load value. */
+	if (qh->phase >= 0)
+		minimax_load = uhci_highest_load(uhci, qh->phase, qh->period);
+	else {
+		int phase, load;
+		int max_phase = min_t(int, MAX_PHASE, qh->period);
+
+		qh->phase = 0;
+		minimax_load = uhci_highest_load(uhci, qh->phase, qh->period);
+		for (phase = 1; phase < max_phase; ++phase) {
+			load = uhci_highest_load(uhci, phase, qh->period);
+			if (load < minimax_load) {
+				minimax_load = load;
+				qh->phase = phase;
+			}
+		}
+	}
+
+	/* Maximum allowable periodic bandwidth is 90%, or 900 us per frame */
+	if (minimax_load + qh->load > 900) {
+		dev_dbg(uhci_dev(uhci), "bandwidth allocation failed: "
+				"period %d, phase %d, %d + %d us\n",
+				qh->period, qh->phase, minimax_load, qh->load);
+		return -ENOSPC;
+	}
+	return 0;
+}
+
+/*
+ * Reserve a periodic QH's bandwidth in the schedule
+ */
+static void uhci_reserve_bandwidth(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	int i;
+	int load = qh->load;
+	char *p = "??";
+
+	for (i = qh->phase; i < MAX_PHASE; i += qh->period) {
+		uhci->load[i] += load;
+		uhci->total_load += load;
+	}
+	uhci_to_hcd(uhci)->self.bandwidth_allocated =
+			uhci->total_load / MAX_PHASE;
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_INT:
+		++uhci_to_hcd(uhci)->self.bandwidth_int_reqs;
+		p = "INT";
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		++uhci_to_hcd(uhci)->self.bandwidth_isoc_reqs;
+		p = "ISO";
+		break;
+	}
+	qh->bandwidth_reserved = 1;
+	dev_dbg(uhci_dev(uhci),
+			"%s dev %d ep%02x-%s, period %d, phase %d, %d us\n",
+			"reserve", qh->udev->devnum,
+			qh->hep->desc.bEndpointAddress, p,
+			qh->period, qh->phase, load);
+}
+
+/*
+ * Release a periodic QH's bandwidth reservation
+ */
+static void uhci_release_bandwidth(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	int i;
+	int load = qh->load;
+	char *p = "??";
+
+	for (i = qh->phase; i < MAX_PHASE; i += qh->period) {
+		uhci->load[i] -= load;
+		uhci->total_load -= load;
+	}
+	uhci_to_hcd(uhci)->self.bandwidth_allocated =
+			uhci->total_load / MAX_PHASE;
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_INT:
+		--uhci_to_hcd(uhci)->self.bandwidth_int_reqs;
+		p = "INT";
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		--uhci_to_hcd(uhci)->self.bandwidth_isoc_reqs;
+		p = "ISO";
+		break;
+	}
+	qh->bandwidth_reserved = 0;
+	dev_dbg(uhci_dev(uhci),
+			"%s dev %d ep%02x-%s, period %d, phase %d, %d us\n",
+			"release", qh->udev->devnum,
+			qh->hep->desc.bEndpointAddress, p,
+			qh->period, qh->phase, load);
+}
+
+static inline struct urb_priv *uhci_alloc_urb_priv(struct uhci_hcd *uhci,
+		struct urb *urb)
+{
+	struct urb_priv *urbp;
+
+	urbp = kmem_cache_zalloc(uhci_up_cachep, GFP_ATOMIC);
+	if (!urbp)
+		return NULL;
+
+	urbp->urb = urb;
+	urb->hcpriv = urbp;
+
+	INIT_LIST_HEAD(&urbp->node);
+	INIT_LIST_HEAD(&urbp->td_list);
+
+	return urbp;
+}
+
+static void uhci_free_urb_priv(struct uhci_hcd *uhci,
+		struct urb_priv *urbp)
+{
+	struct uhci_td *td, *tmp;
+
+	if (!list_empty(&urbp->node))
+		dev_WARN(uhci_dev(uhci), "urb %p still on QH's list!\n",
+				urbp->urb);
+
+	list_for_each_entry_safe(td, tmp, &urbp->td_list, list) {
+		uhci_remove_td_from_urbp(td);
+		uhci_free_td(uhci, td);
+	}
+
+	kmem_cache_free(uhci_up_cachep, urbp);
+}
+
+/*
+ * Map status to standard result codes
+ *
+ * <status> is (td_status(uhci, td) & 0xF60000), a.k.a.
+ * uhci_status_bits(td_status(uhci, td)).
+ * Note: <status> does not include the TD_CTRL_NAK bit.
+ * <dir_out> is True for output TDs and False for input TDs.
+ */
+static int uhci_map_status(int status, int dir_out)
+{
+	if (!status)
+		return 0;
+	if (status & TD_CTRL_BITSTUFF)			/* Bitstuff error */
+		return -EPROTO;
+	if (status & TD_CTRL_CRCTIMEO) {		/* CRC/Timeout */
+		if (dir_out)
+			return -EPROTO;
+		else
+			return -EILSEQ;
+	}
+	if (status & TD_CTRL_BABBLE)			/* Babble */
+		return -EOVERFLOW;
+	if (status & TD_CTRL_DBUFERR)			/* Buffer error */
+		return -ENOSR;
+	if (status & TD_CTRL_STALLED)			/* Stalled */
+		return -EPIPE;
+	return 0;
+}
+
+/*
+ * Control transfers
+ */
+static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
+		struct uhci_qh *qh)
+{
+	struct uhci_td *td;
+	unsigned long destination, status;
+	int maxsze = usb_endpoint_maxp(&qh->hep->desc);
+	int len = urb->transfer_buffer_length;
+	dma_addr_t data = urb->transfer_dma;
+	__hc32 *plink;
+	struct urb_priv *urbp = urb->hcpriv;
+	int skel;
+
+	/* The "pipe" thing contains the destination in bits 8--18 */
+	destination = (urb->pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP;
+
+	/* 3 errors, dummy TD remains inactive */
+	status = uhci_maxerr(3);
+	if (urb->dev->speed == USB_SPEED_LOW)
+		status |= TD_CTRL_LS;
+
+	/*
+	 * Build the TD for the control request setup packet
+	 */
+	td = qh->dummy_td;
+	uhci_add_td_to_urbp(td, urbp);
+	uhci_fill_td(uhci, td, status, destination | uhci_explen(8),
+			urb->setup_dma);
+	plink = &td->link;
+	status |= TD_CTRL_ACTIVE;
+
+	/*
+	 * If direction is "send", change the packet ID from SETUP (0x2D)
+	 * to OUT (0xE1).  Else change it from SETUP to IN (0x69) and
+	 * set Short Packet Detect (SPD) for all data packets.
+	 *
+	 * 0-length transfers always get treated as "send".
+	 */
+	if (usb_pipeout(urb->pipe) || len == 0)
+		destination ^= (USB_PID_SETUP ^ USB_PID_OUT);
+	else {
+		destination ^= (USB_PID_SETUP ^ USB_PID_IN);
+		status |= TD_CTRL_SPD;
+	}
+
+	/*
+	 * Build the DATA TDs
+	 */
+	while (len > 0) {
+		int pktsze = maxsze;
+
+		if (len <= pktsze) {		/* The last data packet */
+			pktsze = len;
+			status &= ~TD_CTRL_SPD;
+		}
+
+		td = uhci_alloc_td(uhci);
+		if (!td)
+			goto nomem;
+		*plink = LINK_TO_TD(uhci, td);
+
+		/* Alternate Data0/1 (start with Data1) */
+		destination ^= TD_TOKEN_TOGGLE;
+
+		uhci_add_td_to_urbp(td, urbp);
+		uhci_fill_td(uhci, td, status,
+			destination | uhci_explen(pktsze), data);
+		plink = &td->link;
+
+		data += pktsze;
+		len -= pktsze;
+	}
+
+	/*
+	 * Build the final TD for control status
+	 */
+	td = uhci_alloc_td(uhci);
+	if (!td)
+		goto nomem;
+	*plink = LINK_TO_TD(uhci, td);
+
+	/* Change direction for the status transaction */
+	destination ^= (USB_PID_IN ^ USB_PID_OUT);
+	destination |= TD_TOKEN_TOGGLE;		/* End in Data1 */
+
+	uhci_add_td_to_urbp(td, urbp);
+	uhci_fill_td(uhci, td, status | TD_CTRL_IOC,
+			destination | uhci_explen(0), 0);
+	plink = &td->link;
+
+	/*
+	 * Build the new dummy TD and activate the old one
+	 */
+	td = uhci_alloc_td(uhci);
+	if (!td)
+		goto nomem;
+	*plink = LINK_TO_TD(uhci, td);
+
+	uhci_fill_td(uhci, td, 0, USB_PID_OUT | uhci_explen(0), 0);
+	wmb();
+	qh->dummy_td->status |= cpu_to_hc32(uhci, TD_CTRL_ACTIVE);
+	qh->dummy_td = td;
+
+	/* Low-speed transfers get a different queue, and won't hog the bus.
+	 * Also, some devices enumerate better without FSBR; the easiest way
+	 * to do that is to put URBs on the low-speed queue while the device
+	 * isn't in the CONFIGURED state. */
+	if (urb->dev->speed == USB_SPEED_LOW ||
+			urb->dev->state != USB_STATE_CONFIGURED)
+		skel = SKEL_LS_CONTROL;
+	else {
+		skel = SKEL_FS_CONTROL;
+		uhci_add_fsbr(uhci, urb);
+	}
+	if (qh->state != QH_STATE_ACTIVE)
+		qh->skel = skel;
+	return 0;
+
+nomem:
+	/* Remove the dummy TD from the td_list so it doesn't get freed */
+	uhci_remove_td_from_urbp(qh->dummy_td);
+	return -ENOMEM;
+}
+
+/*
+ * Common submit for bulk and interrupt
+ */
+static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb,
+		struct uhci_qh *qh)
+{
+	struct uhci_td *td;
+	unsigned long destination, status;
+	int maxsze = usb_endpoint_maxp(&qh->hep->desc);
+	int len = urb->transfer_buffer_length;
+	int this_sg_len;
+	dma_addr_t data;
+	__hc32 *plink;
+	struct urb_priv *urbp = urb->hcpriv;
+	unsigned int toggle;
+	struct scatterlist  *sg;
+	int i;
+
+	if (len < 0)
+		return -EINVAL;
+
+	/* The "pipe" thing contains the destination in bits 8--18 */
+	destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe);
+	toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			 usb_pipeout(urb->pipe));
+
+	/* 3 errors, dummy TD remains inactive */
+	status = uhci_maxerr(3);
+	if (urb->dev->speed == USB_SPEED_LOW)
+		status |= TD_CTRL_LS;
+	if (usb_pipein(urb->pipe))
+		status |= TD_CTRL_SPD;
+
+	i = urb->num_mapped_sgs;
+	if (len > 0 && i > 0) {
+		sg = urb->sg;
+		data = sg_dma_address(sg);
+
+		/* urb->transfer_buffer_length may be smaller than the
+		 * size of the scatterlist (or vice versa)
+		 */
+		this_sg_len = min_t(int, sg_dma_len(sg), len);
+	} else {
+		sg = NULL;
+		data = urb->transfer_dma;
+		this_sg_len = len;
+	}
+	/*
+	 * Build the DATA TDs
+	 */
+	plink = NULL;
+	td = qh->dummy_td;
+	for (;;) {	/* Allow zero length packets */
+		int pktsze = maxsze;
+
+		if (len <= pktsze) {		/* The last packet */
+			pktsze = len;
+			if (!(urb->transfer_flags & URB_SHORT_NOT_OK))
+				status &= ~TD_CTRL_SPD;
+		}
+
+		if (plink) {
+			td = uhci_alloc_td(uhci);
+			if (!td)
+				goto nomem;
+			*plink = LINK_TO_TD(uhci, td);
+		}
+		uhci_add_td_to_urbp(td, urbp);
+		uhci_fill_td(uhci, td, status,
+				destination | uhci_explen(pktsze) |
+					(toggle << TD_TOKEN_TOGGLE_SHIFT),
+				data);
+		plink = &td->link;
+		status |= TD_CTRL_ACTIVE;
+
+		toggle ^= 1;
+		data += pktsze;
+		this_sg_len -= pktsze;
+		len -= maxsze;
+		if (this_sg_len <= 0) {
+			if (--i <= 0 || len <= 0)
+				break;
+			sg = sg_next(sg);
+			data = sg_dma_address(sg);
+			this_sg_len = min_t(int, sg_dma_len(sg), len);
+		}
+	}
+
+	/*
+	 * URB_ZERO_PACKET means adding a 0-length packet, if direction
+	 * is OUT and the transfer_length was an exact multiple of maxsze,
+	 * hence (len = transfer_length - N * maxsze) == 0
+	 * however, if transfer_length == 0, the zero packet was already
+	 * prepared above.
+	 */
+	if ((urb->transfer_flags & URB_ZERO_PACKET) &&
+			usb_pipeout(urb->pipe) && len == 0 &&
+			urb->transfer_buffer_length > 0) {
+		td = uhci_alloc_td(uhci);
+		if (!td)
+			goto nomem;
+		*plink = LINK_TO_TD(uhci, td);
+
+		uhci_add_td_to_urbp(td, urbp);
+		uhci_fill_td(uhci, td, status,
+				destination | uhci_explen(0) |
+					(toggle << TD_TOKEN_TOGGLE_SHIFT),
+				data);
+		plink = &td->link;
+
+		toggle ^= 1;
+	}
+
+	/* Set the interrupt-on-completion flag on the last packet.
+	 * A more-or-less typical 4 KB URB (= size of one memory page)
+	 * will require about 3 ms to transfer; that's a little on the
+	 * fast side but not enough to justify delaying an interrupt
+	 * more than 2 or 3 URBs, so we will ignore the URB_NO_INTERRUPT
+	 * flag setting. */
+	td->status |= cpu_to_hc32(uhci, TD_CTRL_IOC);
+
+	/*
+	 * Build the new dummy TD and activate the old one
+	 */
+	td = uhci_alloc_td(uhci);
+	if (!td)
+		goto nomem;
+	*plink = LINK_TO_TD(uhci, td);
+
+	uhci_fill_td(uhci, td, 0, USB_PID_OUT | uhci_explen(0), 0);
+	wmb();
+	qh->dummy_td->status |= cpu_to_hc32(uhci, TD_CTRL_ACTIVE);
+	qh->dummy_td = td;
+
+	usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			usb_pipeout(urb->pipe), toggle);
+	return 0;
+
+nomem:
+	/* Remove the dummy TD from the td_list so it doesn't get freed */
+	uhci_remove_td_from_urbp(qh->dummy_td);
+	return -ENOMEM;
+}
+
+static int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb,
+		struct uhci_qh *qh)
+{
+	int ret;
+
+	/* Can't have low-speed bulk transfers */
+	if (urb->dev->speed == USB_SPEED_LOW)
+		return -EINVAL;
+
+	if (qh->state != QH_STATE_ACTIVE)
+		qh->skel = SKEL_BULK;
+	ret = uhci_submit_common(uhci, urb, qh);
+	if (ret == 0)
+		uhci_add_fsbr(uhci, urb);
+	return ret;
+}
+
+static int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb,
+		struct uhci_qh *qh)
+{
+	int ret;
+
+	/* USB 1.1 interrupt transfers only involve one packet per interval.
+	 * Drivers can submit URBs of any length, but longer ones will need
+	 * multiple intervals to complete.
+	 */
+
+	if (!qh->bandwidth_reserved) {
+		int exponent;
+
+		/* Figure out which power-of-two queue to use */
+		for (exponent = 7; exponent >= 0; --exponent) {
+			if ((1 << exponent) <= urb->interval)
+				break;
+		}
+		if (exponent < 0)
+			return -EINVAL;
+
+		/* If the slot is full, try a lower period */
+		do {
+			qh->period = 1 << exponent;
+			qh->skel = SKEL_INDEX(exponent);
+
+			/* For now, interrupt phase is fixed by the layout
+			 * of the QH lists.
+			 */
+			qh->phase = (qh->period / 2) & (MAX_PHASE - 1);
+			ret = uhci_check_bandwidth(uhci, qh);
+		} while (ret != 0 && --exponent >= 0);
+		if (ret)
+			return ret;
+	} else if (qh->period > urb->interval)
+		return -EINVAL;		/* Can't decrease the period */
+
+	ret = uhci_submit_common(uhci, urb, qh);
+	if (ret == 0) {
+		urb->interval = qh->period;
+		if (!qh->bandwidth_reserved)
+			uhci_reserve_bandwidth(uhci, qh);
+	}
+	return ret;
+}
+
+/*
+ * Fix up the data structures following a short transfer
+ */
+static int uhci_fixup_short_transfer(struct uhci_hcd *uhci,
+		struct uhci_qh *qh, struct urb_priv *urbp)
+{
+	struct uhci_td *td;
+	struct list_head *tmp;
+	int ret;
+
+	td = list_entry(urbp->td_list.prev, struct uhci_td, list);
+	if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
+
+		/* When a control transfer is short, we have to restart
+		 * the queue at the status stage transaction, which is
+		 * the last TD. */
+		WARN_ON(list_empty(&urbp->td_list));
+		qh->element = LINK_TO_TD(uhci, td);
+		tmp = td->list.prev;
+		ret = -EINPROGRESS;
+
+	} else {
+
+		/* When a bulk/interrupt transfer is short, we have to
+		 * fix up the toggles of the following URBs on the queue
+		 * before restarting the queue at the next URB. */
+		qh->initial_toggle =
+			uhci_toggle(td_token(uhci, qh->post_td)) ^ 1;
+		uhci_fixup_toggles(uhci, qh, 1);
+
+		if (list_empty(&urbp->td_list))
+			td = qh->post_td;
+		qh->element = td->link;
+		tmp = urbp->td_list.prev;
+		ret = 0;
+	}
+
+	/* Remove all the TDs we skipped over, from tmp back to the start */
+	while (tmp != &urbp->td_list) {
+		td = list_entry(tmp, struct uhci_td, list);
+		tmp = tmp->prev;
+
+		uhci_remove_td_from_urbp(td);
+		uhci_free_td(uhci, td);
+	}
+	return ret;
+}
+
+/*
+ * Common result for control, bulk, and interrupt
+ */
+static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb)
+{
+	struct urb_priv *urbp = urb->hcpriv;
+	struct uhci_qh *qh = urbp->qh;
+	struct uhci_td *td, *tmp;
+	unsigned status;
+	int ret = 0;
+
+	list_for_each_entry_safe(td, tmp, &urbp->td_list, list) {
+		unsigned int ctrlstat;
+		int len;
+
+		ctrlstat = td_status(uhci, td);
+		status = uhci_status_bits(ctrlstat);
+		if (status & TD_CTRL_ACTIVE)
+			return -EINPROGRESS;
+
+		len = uhci_actual_length(ctrlstat);
+		urb->actual_length += len;
+
+		if (status) {
+			ret = uhci_map_status(status,
+					uhci_packetout(td_token(uhci, td)));
+			if ((debug == 1 && ret != -EPIPE) || debug > 1) {
+				/* Some debugging code */
+				dev_dbg(&urb->dev->dev,
+						"%s: failed with status %x\n",
+						__func__, status);
+
+				if (debug > 1 && errbuf) {
+					/* Print the chain for debugging */
+					uhci_show_qh(uhci, urbp->qh, errbuf,
+						ERRBUF_LEN - EXTRA_SPACE, 0);
+					lprintk(errbuf);
+				}
+			}
+
+		/* Did we receive a short packet? */
+		} else if (len < uhci_expected_length(td_token(uhci, td))) {
+
+			/* For control transfers, go to the status TD if
+			 * this isn't already the last data TD */
+			if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
+				if (td->list.next != urbp->td_list.prev)
+					ret = 1;
+			}
+
+			/* For bulk and interrupt, this may be an error */
+			else if (urb->transfer_flags & URB_SHORT_NOT_OK)
+				ret = -EREMOTEIO;
+
+			/* Fixup needed only if this isn't the URB's last TD */
+			else if (&td->list != urbp->td_list.prev)
+				ret = 1;
+		}
+
+		uhci_remove_td_from_urbp(td);
+		if (qh->post_td)
+			uhci_free_td(uhci, qh->post_td);
+		qh->post_td = td;
+
+		if (ret != 0)
+			goto err;
+	}
+	return ret;
+
+err:
+	if (ret < 0) {
+		/* Note that the queue has stopped and save
+		 * the next toggle value */
+		qh->element = UHCI_PTR_TERM(uhci);
+		qh->is_stopped = 1;
+		qh->needs_fixup = (qh->type != USB_ENDPOINT_XFER_CONTROL);
+		qh->initial_toggle = uhci_toggle(td_token(uhci, td)) ^
+				(ret == -EREMOTEIO);
+
+	} else		/* Short packet received */
+		ret = uhci_fixup_short_transfer(uhci, qh, urbp);
+	return ret;
+}
+
+/*
+ * Isochronous transfers
+ */
+static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb,
+		struct uhci_qh *qh)
+{
+	struct uhci_td *td = NULL;	/* Since urb->number_of_packets > 0 */
+	int i;
+	unsigned frame, next;
+	unsigned long destination, status;
+	struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv;
+
+	/* Values must not be too big (could overflow below) */
+	if (urb->interval >= UHCI_NUMFRAMES ||
+			urb->number_of_packets >= UHCI_NUMFRAMES)
+		return -EFBIG;
+
+	uhci_get_current_frame_number(uhci);
+
+	/* Check the period and figure out the starting frame number */
+	if (!qh->bandwidth_reserved) {
+		qh->period = urb->interval;
+		qh->phase = -1;		/* Find the best phase */
+		i = uhci_check_bandwidth(uhci, qh);
+		if (i)
+			return i;
+
+		/* Allow a little time to allocate the TDs */
+		next = uhci->frame_number + 10;
+		frame = qh->phase;
+
+		/* Round up to the first available slot */
+		frame += (next - frame + qh->period - 1) & -qh->period;
+
+	} else if (qh->period != urb->interval) {
+		return -EINVAL;		/* Can't change the period */
+
+	} else {
+		next = uhci->frame_number + 1;
+
+		/* Find the next unused frame */
+		if (list_empty(&qh->queue)) {
+			frame = qh->iso_frame;
+		} else {
+			struct urb *lurb;
+
+			lurb = list_entry(qh->queue.prev,
+					struct urb_priv, node)->urb;
+			frame = lurb->start_frame +
+					lurb->number_of_packets *
+					lurb->interval;
+		}
+
+		/* Fell behind? */
+		if (!uhci_frame_before_eq(next, frame)) {
+
+			/* USB_ISO_ASAP: Round up to the first available slot */
+			if (urb->transfer_flags & URB_ISO_ASAP)
+				frame += (next - frame + qh->period - 1) &
+						-qh->period;
+
+			/*
+			 * Not ASAP: Use the next slot in the stream,
+			 * no matter what.
+			 */
+			else if (!uhci_frame_before_eq(next,
+					frame + (urb->number_of_packets - 1) *
+						qh->period))
+				dev_dbg(uhci_dev(uhci), "iso underrun %p (%u+%u < %u)\n",
+						urb, frame,
+						(urb->number_of_packets - 1) *
+							qh->period,
+						next);
+		}
+	}
+
+	/* Make sure we won't have to go too far into the future */
+	if (uhci_frame_before_eq(uhci->last_iso_frame + UHCI_NUMFRAMES,
+			frame + urb->number_of_packets * urb->interval))
+		return -EFBIG;
+	urb->start_frame = frame;
+
+	status = TD_CTRL_ACTIVE | TD_CTRL_IOS;
+	destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe);
+
+	for (i = 0; i < urb->number_of_packets; i++) {
+		td = uhci_alloc_td(uhci);
+		if (!td)
+			return -ENOMEM;
+
+		uhci_add_td_to_urbp(td, urbp);
+		uhci_fill_td(uhci, td, status, destination |
+				uhci_explen(urb->iso_frame_desc[i].length),
+				urb->transfer_dma +
+					urb->iso_frame_desc[i].offset);
+	}
+
+	/* Set the interrupt-on-completion flag on the last packet. */
+	td->status |= cpu_to_hc32(uhci, TD_CTRL_IOC);
+
+	/* Add the TDs to the frame list */
+	frame = urb->start_frame;
+	list_for_each_entry(td, &urbp->td_list, list) {
+		uhci_insert_td_in_frame_list(uhci, td, frame);
+		frame += qh->period;
+	}
+
+	if (list_empty(&qh->queue)) {
+		qh->iso_packet_desc = &urb->iso_frame_desc[0];
+		qh->iso_frame = urb->start_frame;
+	}
+
+	qh->skel = SKEL_ISO;
+	if (!qh->bandwidth_reserved)
+		uhci_reserve_bandwidth(uhci, qh);
+	return 0;
+}
+
+static int uhci_result_isochronous(struct uhci_hcd *uhci, struct urb *urb)
+{
+	struct uhci_td *td, *tmp;
+	struct urb_priv *urbp = urb->hcpriv;
+	struct uhci_qh *qh = urbp->qh;
+
+	list_for_each_entry_safe(td, tmp, &urbp->td_list, list) {
+		unsigned int ctrlstat;
+		int status;
+		int actlength;
+
+		if (uhci_frame_before_eq(uhci->cur_iso_frame, qh->iso_frame))
+			return -EINPROGRESS;
+
+		uhci_remove_tds_from_frame(uhci, qh->iso_frame);
+
+		ctrlstat = td_status(uhci, td);
+		if (ctrlstat & TD_CTRL_ACTIVE) {
+			status = -EXDEV;	/* TD was added too late? */
+		} else {
+			status = uhci_map_status(uhci_status_bits(ctrlstat),
+					usb_pipeout(urb->pipe));
+			actlength = uhci_actual_length(ctrlstat);
+
+			urb->actual_length += actlength;
+			qh->iso_packet_desc->actual_length = actlength;
+			qh->iso_packet_desc->status = status;
+		}
+		if (status)
+			urb->error_count++;
+
+		uhci_remove_td_from_urbp(td);
+		uhci_free_td(uhci, td);
+		qh->iso_frame += qh->period;
+		++qh->iso_packet_desc;
+	}
+	return 0;
+}
+
+static int uhci_urb_enqueue(struct usb_hcd *hcd,
+		struct urb *urb, gfp_t mem_flags)
+{
+	int ret;
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	unsigned long flags;
+	struct urb_priv *urbp;
+	struct uhci_qh *qh;
+
+	spin_lock_irqsave(&uhci->lock, flags);
+
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret)
+		goto done_not_linked;
+
+	ret = -ENOMEM;
+	urbp = uhci_alloc_urb_priv(uhci, urb);
+	if (!urbp)
+		goto done;
+
+	if (urb->ep->hcpriv)
+		qh = urb->ep->hcpriv;
+	else {
+		qh = uhci_alloc_qh(uhci, urb->dev, urb->ep);
+		if (!qh)
+			goto err_no_qh;
+	}
+	urbp->qh = qh;
+
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		ret = uhci_submit_control(uhci, urb, qh);
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		ret = uhci_submit_bulk(uhci, urb, qh);
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		ret = uhci_submit_interrupt(uhci, urb, qh);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		urb->error_count = 0;
+		ret = uhci_submit_isochronous(uhci, urb, qh);
+		break;
+	}
+	if (ret != 0)
+		goto err_submit_failed;
+
+	/* Add this URB to the QH */
+	list_add_tail(&urbp->node, &qh->queue);
+
+	/* If the new URB is the first and only one on this QH then either
+	 * the QH is new and idle or else it's unlinked and waiting to
+	 * become idle, so we can activate it right away.  But only if the
+	 * queue isn't stopped. */
+	if (qh->queue.next == &urbp->node && !qh->is_stopped) {
+		uhci_activate_qh(uhci, qh);
+		uhci_urbp_wants_fsbr(uhci, urbp);
+	}
+	goto done;
+
+err_submit_failed:
+	if (qh->state == QH_STATE_IDLE)
+		uhci_make_qh_idle(uhci, qh);	/* Reclaim unused QH */
+err_no_qh:
+	uhci_free_urb_priv(uhci, urbp);
+done:
+	if (ret)
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+done_not_linked:
+	spin_unlock_irqrestore(&uhci->lock, flags);
+	return ret;
+}
+
+static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	unsigned long flags;
+	struct uhci_qh *qh;
+	int rc;
+
+	spin_lock_irqsave(&uhci->lock, flags);
+	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (rc)
+		goto done;
+
+	qh = ((struct urb_priv *) urb->hcpriv)->qh;
+
+	/* Remove Isochronous TDs from the frame list ASAP */
+	if (qh->type == USB_ENDPOINT_XFER_ISOC) {
+		uhci_unlink_isochronous_tds(uhci, urb);
+		mb();
+
+		/* If the URB has already started, update the QH unlink time */
+		uhci_get_current_frame_number(uhci);
+		if (uhci_frame_before_eq(urb->start_frame, uhci->frame_number))
+			qh->unlink_frame = uhci->frame_number;
+	}
+
+	uhci_unlink_qh(uhci, qh);
+
+done:
+	spin_unlock_irqrestore(&uhci->lock, flags);
+	return rc;
+}
+
+/*
+ * Finish unlinking an URB and give it back
+ */
+static void uhci_giveback_urb(struct uhci_hcd *uhci, struct uhci_qh *qh,
+		struct urb *urb, int status)
+__releases(uhci->lock)
+__acquires(uhci->lock)
+{
+	struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv;
+
+	if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
+
+		/* Subtract off the length of the SETUP packet from
+		 * urb->actual_length.
+		 */
+		urb->actual_length -= min_t(u32, 8, urb->actual_length);
+	}
+
+	/* When giving back the first URB in an Isochronous queue,
+	 * reinitialize the QH's iso-related members for the next URB. */
+	else if (qh->type == USB_ENDPOINT_XFER_ISOC &&
+			urbp->node.prev == &qh->queue &&
+			urbp->node.next != &qh->queue) {
+		struct urb *nurb = list_entry(urbp->node.next,
+				struct urb_priv, node)->urb;
+
+		qh->iso_packet_desc = &nurb->iso_frame_desc[0];
+		qh->iso_frame = nurb->start_frame;
+	}
+
+	/* Take the URB off the QH's queue.  If the queue is now empty,
+	 * this is a perfect time for a toggle fixup. */
+	list_del_init(&urbp->node);
+	if (list_empty(&qh->queue) && qh->needs_fixup) {
+		usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+				usb_pipeout(urb->pipe), qh->initial_toggle);
+		qh->needs_fixup = 0;
+	}
+
+	uhci_free_urb_priv(uhci, urbp);
+	usb_hcd_unlink_urb_from_ep(uhci_to_hcd(uhci), urb);
+
+	spin_unlock(&uhci->lock);
+	usb_hcd_giveback_urb(uhci_to_hcd(uhci), urb, status);
+	spin_lock(&uhci->lock);
+
+	/* If the queue is now empty, we can unlink the QH and give up its
+	 * reserved bandwidth. */
+	if (list_empty(&qh->queue)) {
+		uhci_unlink_qh(uhci, qh);
+		if (qh->bandwidth_reserved)
+			uhci_release_bandwidth(uhci, qh);
+	}
+}
+
+/*
+ * Scan the URBs in a QH's queue
+ */
+#define QH_FINISHED_UNLINKING(qh)			\
+		(qh->state == QH_STATE_UNLINKING &&	\
+		uhci->frame_number + uhci->is_stopped != qh->unlink_frame)
+
+static void uhci_scan_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	struct urb_priv *urbp;
+	struct urb *urb;
+	int status;
+
+	while (!list_empty(&qh->queue)) {
+		urbp = list_entry(qh->queue.next, struct urb_priv, node);
+		urb = urbp->urb;
+
+		if (qh->type == USB_ENDPOINT_XFER_ISOC)
+			status = uhci_result_isochronous(uhci, urb);
+		else
+			status = uhci_result_common(uhci, urb);
+		if (status == -EINPROGRESS)
+			break;
+
+		/* Dequeued but completed URBs can't be given back unless
+		 * the QH is stopped or has finished unlinking. */
+		if (urb->unlinked) {
+			if (QH_FINISHED_UNLINKING(qh))
+				qh->is_stopped = 1;
+			else if (!qh->is_stopped)
+				return;
+		}
+
+		uhci_giveback_urb(uhci, qh, urb, status);
+		if (status < 0)
+			break;
+	}
+
+	/* If the QH is neither stopped nor finished unlinking (normal case),
+	 * our work here is done. */
+	if (QH_FINISHED_UNLINKING(qh))
+		qh->is_stopped = 1;
+	else if (!qh->is_stopped)
+		return;
+
+	/* Otherwise give back each of the dequeued URBs */
+restart:
+	list_for_each_entry(urbp, &qh->queue, node) {
+		urb = urbp->urb;
+		if (urb->unlinked) {
+
+			/* Fix up the TD links and save the toggles for
+			 * non-Isochronous queues.  For Isochronous queues,
+			 * test for too-recent dequeues. */
+			if (!uhci_cleanup_queue(uhci, qh, urb)) {
+				qh->is_stopped = 0;
+				return;
+			}
+			uhci_giveback_urb(uhci, qh, urb, 0);
+			goto restart;
+		}
+	}
+	qh->is_stopped = 0;
+
+	/* There are no more dequeued URBs.  If there are still URBs on the
+	 * queue, the QH can now be re-activated. */
+	if (!list_empty(&qh->queue)) {
+		if (qh->needs_fixup)
+			uhci_fixup_toggles(uhci, qh, 0);
+
+		/* If the first URB on the queue wants FSBR but its time
+		 * limit has expired, set the next TD to interrupt on
+		 * completion before reactivating the QH. */
+		urbp = list_entry(qh->queue.next, struct urb_priv, node);
+		if (urbp->fsbr && qh->wait_expired) {
+			struct uhci_td *td = list_entry(urbp->td_list.next,
+					struct uhci_td, list);
+
+			td->status |= cpu_to_hc32(uhci, TD_CTRL_IOC);
+		}
+
+		uhci_activate_qh(uhci, qh);
+	}
+
+	/* The queue is empty.  The QH can become idle if it is fully
+	 * unlinked. */
+	else if (QH_FINISHED_UNLINKING(qh))
+		uhci_make_qh_idle(uhci, qh);
+}
+
+/*
+ * Check for queues that have made some forward progress.
+ * Returns 0 if the queue is not Isochronous, is ACTIVE, and
+ * has not advanced since last examined; 1 otherwise.
+ *
+ * Early Intel controllers have a bug which causes qh->element sometimes
+ * not to advance when a TD completes successfully.  The queue remains
+ * stuck on the inactive completed TD.  We detect such cases and advance
+ * the element pointer by hand.
+ */
+static int uhci_advance_check(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	struct urb_priv *urbp = NULL;
+	struct uhci_td *td;
+	int ret = 1;
+	unsigned status;
+
+	if (qh->type == USB_ENDPOINT_XFER_ISOC)
+		goto done;
+
+	/* Treat an UNLINKING queue as though it hasn't advanced.
+	 * This is okay because reactivation will treat it as though
+	 * it has advanced, and if it is going to become IDLE then
+	 * this doesn't matter anyway.  Furthermore it's possible
+	 * for an UNLINKING queue not to have any URBs at all, or
+	 * for its first URB not to have any TDs (if it was dequeued
+	 * just as it completed).  So it's not easy in any case to
+	 * test whether such queues have advanced. */
+	if (qh->state != QH_STATE_ACTIVE) {
+		urbp = NULL;
+		status = 0;
+
+	} else {
+		urbp = list_entry(qh->queue.next, struct urb_priv, node);
+		td = list_entry(urbp->td_list.next, struct uhci_td, list);
+		status = td_status(uhci, td);
+		if (!(status & TD_CTRL_ACTIVE)) {
+
+			/* We're okay, the queue has advanced */
+			qh->wait_expired = 0;
+			qh->advance_jiffies = jiffies;
+			goto done;
+		}
+		ret = uhci->is_stopped;
+	}
+
+	/* The queue hasn't advanced; check for timeout */
+	if (qh->wait_expired)
+		goto done;
+
+	if (time_after(jiffies, qh->advance_jiffies + QH_WAIT_TIMEOUT)) {
+
+		/* Detect the Intel bug and work around it */
+		if (qh->post_td && qh_element(qh) ==
+			LINK_TO_TD(uhci, qh->post_td)) {
+			qh->element = qh->post_td->link;
+			qh->advance_jiffies = jiffies;
+			ret = 1;
+			goto done;
+		}
+
+		qh->wait_expired = 1;
+
+		/* If the current URB wants FSBR, unlink it temporarily
+		 * so that we can safely set the next TD to interrupt on
+		 * completion.  That way we'll know as soon as the queue
+		 * starts moving again. */
+		if (urbp && urbp->fsbr && !(status & TD_CTRL_IOC))
+			uhci_unlink_qh(uhci, qh);
+
+	} else {
+		/* Unmoving but not-yet-expired queues keep FSBR alive */
+		if (urbp)
+			uhci_urbp_wants_fsbr(uhci, urbp);
+	}
+
+done:
+	return ret;
+}
+
+/*
+ * Process events in the schedule, but only in one thread at a time
+ */
+static void uhci_scan_schedule(struct uhci_hcd *uhci)
+{
+	int i;
+	struct uhci_qh *qh;
+
+	/* Don't allow re-entrant calls */
+	if (uhci->scan_in_progress) {
+		uhci->need_rescan = 1;
+		return;
+	}
+	uhci->scan_in_progress = 1;
+rescan:
+	uhci->need_rescan = 0;
+	uhci->fsbr_is_wanted = 0;
+
+	uhci_clear_next_interrupt(uhci);
+	uhci_get_current_frame_number(uhci);
+	uhci->cur_iso_frame = uhci->frame_number;
+
+	/* Go through all the QH queues and process the URBs in each one */
+	for (i = 0; i < UHCI_NUM_SKELQH - 1; ++i) {
+		uhci->next_qh = list_entry(uhci->skelqh[i]->node.next,
+				struct uhci_qh, node);
+		while ((qh = uhci->next_qh) != uhci->skelqh[i]) {
+			uhci->next_qh = list_entry(qh->node.next,
+					struct uhci_qh, node);
+
+			if (uhci_advance_check(uhci, qh)) {
+				uhci_scan_qh(uhci, qh);
+				if (qh->state == QH_STATE_ACTIVE) {
+					uhci_urbp_wants_fsbr(uhci,
+	list_entry(qh->queue.next, struct urb_priv, node));
+				}
+			}
+		}
+	}
+
+	uhci->last_iso_frame = uhci->cur_iso_frame;
+	if (uhci->need_rescan)
+		goto rescan;
+	uhci->scan_in_progress = 0;
+
+	if (uhci->fsbr_is_on && !uhci->fsbr_is_wanted &&
+			!uhci->fsbr_expiring) {
+		uhci->fsbr_expiring = 1;
+		mod_timer(&uhci->fsbr_timer, jiffies + FSBR_OFF_DELAY);
+	}
+
+	if (list_empty(&uhci->skel_unlink_qh->node))
+		uhci_clear_next_interrupt(uhci);
+	else
+		uhci_set_next_interrupt(uhci);
+}
diff --git a/drivers/usb/host/xen-hcd.c b/drivers/usb/host/xen-hcd.c
new file mode 100644
index 000000000..de1b09158
--- /dev/null
+++ b/drivers/usb/host/xen-hcd.c
@@ -0,0 +1,1613 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * xen-hcd.c
+ *
+ * Xen USB Virtual Host Controller driver
+ *
+ * Copyright (C) 2009, FUJITSU LABORATORIES LTD.
+ * Author: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com>
+ */
+
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/list.h>
+#include <linux/usb/hcd.h>
+#include <linux/io.h>
+
+#include <xen/xen.h>
+#include <xen/xenbus.h>
+#include <xen/grant_table.h>
+#include <xen/events.h>
+#include <xen/page.h>
+
+#include <xen/interface/io/usbif.h>
+
+/* Private per-URB data */
+struct urb_priv {
+	struct list_head list;
+	struct urb *urb;
+	int req_id;		/* RING_REQUEST id for submitting */
+	int unlink_req_id;	/* RING_REQUEST id for unlinking */
+	int status;
+	bool unlinked;		/* dequeued marker */
+};
+
+/* virtual roothub port status */
+struct rhport_status {
+	__u32 status;
+	bool resuming;		/* in resuming */
+	bool c_connection;	/* connection changed */
+	unsigned long timeout;
+};
+
+/* status of attached device */
+struct vdevice_status {
+	int devnum;
+	enum usb_device_state status;
+	enum usb_device_speed speed;
+};
+
+/* RING request shadow */
+struct usb_shadow {
+	struct xenusb_urb_request req;
+	struct urb *urb;
+	bool in_flight;
+};
+
+struct xenhcd_info {
+	/* Virtual Host Controller has 4 urb queues */
+	struct list_head pending_submit_list;
+	struct list_head pending_unlink_list;
+	struct list_head in_progress_list;
+	struct list_head giveback_waiting_list;
+
+	spinlock_t lock;
+
+	/* timer that kick pending and giveback waiting urbs */
+	struct timer_list watchdog;
+	unsigned long actions;
+
+	/* virtual root hub */
+	int rh_numports;
+	struct rhport_status ports[XENUSB_MAX_PORTNR];
+	struct vdevice_status devices[XENUSB_MAX_PORTNR];
+
+	/* Xen related staff */
+	struct xenbus_device *xbdev;
+	int urb_ring_ref;
+	int conn_ring_ref;
+	struct xenusb_urb_front_ring urb_ring;
+	struct xenusb_conn_front_ring conn_ring;
+
+	unsigned int evtchn;
+	unsigned int irq;
+	struct usb_shadow shadow[XENUSB_URB_RING_SIZE];
+	unsigned int shadow_free;
+
+	bool error;
+};
+
+#define XENHCD_RING_JIFFIES (HZ/200)
+#define XENHCD_SCAN_JIFFIES 1
+
+enum xenhcd_timer_action {
+	TIMER_RING_WATCHDOG,
+	TIMER_SCAN_PENDING_URBS,
+};
+
+static struct kmem_cache *xenhcd_urbp_cachep;
+
+static inline struct xenhcd_info *xenhcd_hcd_to_info(struct usb_hcd *hcd)
+{
+	return (struct xenhcd_info *)hcd->hcd_priv;
+}
+
+static inline struct usb_hcd *xenhcd_info_to_hcd(struct xenhcd_info *info)
+{
+	return container_of((void *)info, struct usb_hcd, hcd_priv);
+}
+
+static void xenhcd_set_error(struct xenhcd_info *info, const char *msg)
+{
+	info->error = true;
+
+	pr_alert("xen-hcd: protocol error: %s!\n", msg);
+}
+
+static inline void xenhcd_timer_action_done(struct xenhcd_info *info,
+					    enum xenhcd_timer_action action)
+{
+	clear_bit(action, &info->actions);
+}
+
+static void xenhcd_timer_action(struct xenhcd_info *info,
+				enum xenhcd_timer_action action)
+{
+	if (timer_pending(&info->watchdog) &&
+	    test_bit(TIMER_SCAN_PENDING_URBS, &info->actions))
+		return;
+
+	if (!test_and_set_bit(action, &info->actions)) {
+		unsigned long t;
+
+		switch (action) {
+		case TIMER_RING_WATCHDOG:
+			t = XENHCD_RING_JIFFIES;
+			break;
+		default:
+			t = XENHCD_SCAN_JIFFIES;
+			break;
+		}
+		mod_timer(&info->watchdog, t + jiffies);
+	}
+}
+
+/*
+ * set virtual port connection status
+ */
+static void xenhcd_set_connect_state(struct xenhcd_info *info, int portnum)
+{
+	int port;
+
+	port = portnum - 1;
+	if (info->ports[port].status & USB_PORT_STAT_POWER) {
+		switch (info->devices[port].speed) {
+		case XENUSB_SPEED_NONE:
+			info->ports[port].status &=
+				~(USB_PORT_STAT_CONNECTION |
+				  USB_PORT_STAT_ENABLE |
+				  USB_PORT_STAT_LOW_SPEED |
+				  USB_PORT_STAT_HIGH_SPEED |
+				  USB_PORT_STAT_SUSPEND);
+			break;
+		case XENUSB_SPEED_LOW:
+			info->ports[port].status |= USB_PORT_STAT_CONNECTION;
+			info->ports[port].status |= USB_PORT_STAT_LOW_SPEED;
+			break;
+		case XENUSB_SPEED_FULL:
+			info->ports[port].status |= USB_PORT_STAT_CONNECTION;
+			break;
+		case XENUSB_SPEED_HIGH:
+			info->ports[port].status |= USB_PORT_STAT_CONNECTION;
+			info->ports[port].status |= USB_PORT_STAT_HIGH_SPEED;
+			break;
+		default: /* error */
+			return;
+		}
+		info->ports[port].status |= (USB_PORT_STAT_C_CONNECTION << 16);
+	}
+}
+
+/*
+ * set virtual device connection status
+ */
+static int xenhcd_rhport_connect(struct xenhcd_info *info, __u8 portnum,
+				 __u8 speed)
+{
+	int port;
+
+	if (portnum < 1 || portnum > info->rh_numports)
+		return -EINVAL; /* invalid port number */
+
+	port = portnum - 1;
+	if (info->devices[port].speed != speed) {
+		switch (speed) {
+		case XENUSB_SPEED_NONE: /* disconnect */
+			info->devices[port].status = USB_STATE_NOTATTACHED;
+			break;
+		case XENUSB_SPEED_LOW:
+		case XENUSB_SPEED_FULL:
+		case XENUSB_SPEED_HIGH:
+			info->devices[port].status = USB_STATE_ATTACHED;
+			break;
+		default: /* error */
+			return -EINVAL;
+		}
+		info->devices[port].speed = speed;
+		info->ports[port].c_connection = true;
+
+		xenhcd_set_connect_state(info, portnum);
+	}
+
+	return 0;
+}
+
+/*
+ * SetPortFeature(PORT_SUSPENDED)
+ */
+static void xenhcd_rhport_suspend(struct xenhcd_info *info, int portnum)
+{
+	int port;
+
+	port = portnum - 1;
+	info->ports[port].status |= USB_PORT_STAT_SUSPEND;
+	info->devices[port].status = USB_STATE_SUSPENDED;
+}
+
+/*
+ * ClearPortFeature(PORT_SUSPENDED)
+ */
+static void xenhcd_rhport_resume(struct xenhcd_info *info, int portnum)
+{
+	int port;
+
+	port = portnum - 1;
+	if (info->ports[port].status & USB_PORT_STAT_SUSPEND) {
+		info->ports[port].resuming = true;
+		info->ports[port].timeout = jiffies + msecs_to_jiffies(20);
+	}
+}
+
+/*
+ * SetPortFeature(PORT_POWER)
+ */
+static void xenhcd_rhport_power_on(struct xenhcd_info *info, int portnum)
+{
+	int port;
+
+	port = portnum - 1;
+	if ((info->ports[port].status & USB_PORT_STAT_POWER) == 0) {
+		info->ports[port].status |= USB_PORT_STAT_POWER;
+		if (info->devices[port].status != USB_STATE_NOTATTACHED)
+			info->devices[port].status = USB_STATE_POWERED;
+		if (info->ports[port].c_connection)
+			xenhcd_set_connect_state(info, portnum);
+	}
+}
+
+/*
+ * ClearPortFeature(PORT_POWER)
+ * SetConfiguration(non-zero)
+ * Power_Source_Off
+ * Over-current
+ */
+static void xenhcd_rhport_power_off(struct xenhcd_info *info, int portnum)
+{
+	int port;
+
+	port = portnum - 1;
+	if (info->ports[port].status & USB_PORT_STAT_POWER) {
+		info->ports[port].status = 0;
+		if (info->devices[port].status != USB_STATE_NOTATTACHED)
+			info->devices[port].status = USB_STATE_ATTACHED;
+	}
+}
+
+/*
+ * ClearPortFeature(PORT_ENABLE)
+ */
+static void xenhcd_rhport_disable(struct xenhcd_info *info, int portnum)
+{
+	int port;
+
+	port = portnum - 1;
+	info->ports[port].status &= ~USB_PORT_STAT_ENABLE;
+	info->ports[port].status &= ~USB_PORT_STAT_SUSPEND;
+	info->ports[port].resuming = false;
+	if (info->devices[port].status != USB_STATE_NOTATTACHED)
+		info->devices[port].status = USB_STATE_POWERED;
+}
+
+/*
+ * SetPortFeature(PORT_RESET)
+ */
+static void xenhcd_rhport_reset(struct xenhcd_info *info, int portnum)
+{
+	int port;
+
+	port = portnum - 1;
+	info->ports[port].status &= ~(USB_PORT_STAT_ENABLE |
+				      USB_PORT_STAT_LOW_SPEED |
+				      USB_PORT_STAT_HIGH_SPEED);
+	info->ports[port].status |= USB_PORT_STAT_RESET;
+
+	if (info->devices[port].status != USB_STATE_NOTATTACHED)
+		info->devices[port].status = USB_STATE_ATTACHED;
+
+	/* 10msec reset signaling */
+	info->ports[port].timeout = jiffies + msecs_to_jiffies(10);
+}
+
+#ifdef CONFIG_PM
+static int xenhcd_bus_suspend(struct usb_hcd *hcd)
+{
+	struct xenhcd_info *info = xenhcd_hcd_to_info(hcd);
+	int ret = 0;
+	int i, ports;
+
+	ports = info->rh_numports;
+
+	spin_lock_irq(&info->lock);
+	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+		ret = -ESHUTDOWN;
+	} else {
+		/* suspend any active ports*/
+		for (i = 1; i <= ports; i++)
+			xenhcd_rhport_suspend(info, i);
+	}
+	spin_unlock_irq(&info->lock);
+
+	del_timer_sync(&info->watchdog);
+
+	return ret;
+}
+
+static int xenhcd_bus_resume(struct usb_hcd *hcd)
+{
+	struct xenhcd_info *info = xenhcd_hcd_to_info(hcd);
+	int ret = 0;
+	int i, ports;
+
+	ports = info->rh_numports;
+
+	spin_lock_irq(&info->lock);
+	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+		ret = -ESHUTDOWN;
+	} else {
+		/* resume any suspended ports*/
+		for (i = 1; i <= ports; i++)
+			xenhcd_rhport_resume(info, i);
+	}
+	spin_unlock_irq(&info->lock);
+
+	return ret;
+}
+#endif
+
+static void xenhcd_hub_descriptor(struct xenhcd_info *info,
+				  struct usb_hub_descriptor *desc)
+{
+	__u16 temp;
+	int ports = info->rh_numports;
+
+	desc->bDescriptorType = 0x29;
+	desc->bPwrOn2PwrGood = 10; /* EHCI says 20ms max */
+	desc->bHubContrCurrent = 0;
+	desc->bNbrPorts = ports;
+
+	/* size of DeviceRemovable and PortPwrCtrlMask fields */
+	temp = 1 + (ports / 8);
+	desc->bDescLength = 7 + 2 * temp;
+
+	/* bitmaps for DeviceRemovable and PortPwrCtrlMask */
+	memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
+	memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
+
+	/* per-port over current reporting and no power switching */
+	temp = 0x000a;
+	desc->wHubCharacteristics = cpu_to_le16(temp);
+}
+
+/* port status change mask for hub_status_data */
+#define PORT_C_MASK	((USB_PORT_STAT_C_CONNECTION |		\
+			  USB_PORT_STAT_C_ENABLE |		\
+			  USB_PORT_STAT_C_SUSPEND |		\
+			  USB_PORT_STAT_C_OVERCURRENT |		\
+			  USB_PORT_STAT_C_RESET) << 16)
+
+/*
+ * See USB 2.0 Spec, 11.12.4 Hub and Port Status Change Bitmap.
+ * If port status changed, writes the bitmap to buf and return
+ * that length(number of bytes).
+ * If Nothing changed, return 0.
+ */
+static int xenhcd_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct xenhcd_info *info = xenhcd_hcd_to_info(hcd);
+	int ports;
+	int i;
+	unsigned long flags;
+	int ret;
+	int changed = 0;
+
+	/* initialize the status to no-changes */
+	ports = info->rh_numports;
+	ret = 1 + (ports / 8);
+	memset(buf, 0, ret);
+
+	spin_lock_irqsave(&info->lock, flags);
+
+	for (i = 0; i < ports; i++) {
+		/* check status for each port */
+		if (info->ports[i].status & PORT_C_MASK) {
+			buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
+			changed = 1;
+		}
+	}
+
+	if ((hcd->state == HC_STATE_SUSPENDED) && (changed == 1))
+		usb_hcd_resume_root_hub(hcd);
+
+	spin_unlock_irqrestore(&info->lock, flags);
+
+	return changed ? ret : 0;
+}
+
+static int xenhcd_hub_control(struct usb_hcd *hcd, __u16 typeReq, __u16 wValue,
+			      __u16 wIndex, char *buf, __u16 wLength)
+{
+	struct xenhcd_info *info = xenhcd_hcd_to_info(hcd);
+	int ports = info->rh_numports;
+	unsigned long flags;
+	int ret = 0;
+	int i;
+	int changed = 0;
+
+	spin_lock_irqsave(&info->lock, flags);
+	switch (typeReq) {
+	case ClearHubFeature:
+		/* ignore this request */
+		break;
+	case ClearPortFeature:
+		if (!wIndex || wIndex > ports)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			xenhcd_rhport_resume(info, wIndex);
+			break;
+		case USB_PORT_FEAT_POWER:
+			xenhcd_rhport_power_off(info, wIndex);
+			break;
+		case USB_PORT_FEAT_ENABLE:
+			xenhcd_rhport_disable(info, wIndex);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			info->ports[wIndex - 1].c_connection = false;
+			fallthrough;
+		default:
+			info->ports[wIndex - 1].status &= ~(1 << wValue);
+			break;
+		}
+		break;
+	case GetHubDescriptor:
+		xenhcd_hub_descriptor(info, (struct usb_hub_descriptor *)buf);
+		break;
+	case GetHubStatus:
+		/* always local power supply good and no over-current exists. */
+		*(__le32 *)buf = cpu_to_le32(0);
+		break;
+	case GetPortStatus:
+		if (!wIndex || wIndex > ports)
+			goto error;
+
+		wIndex--;
+
+		/* resume completion */
+		if (info->ports[wIndex].resuming &&
+		    time_after_eq(jiffies, info->ports[wIndex].timeout)) {
+			info->ports[wIndex].status |=
+				USB_PORT_STAT_C_SUSPEND << 16;
+			info->ports[wIndex].status &= ~USB_PORT_STAT_SUSPEND;
+		}
+
+		/* reset completion */
+		if ((info->ports[wIndex].status & USB_PORT_STAT_RESET) != 0 &&
+		    time_after_eq(jiffies, info->ports[wIndex].timeout)) {
+			info->ports[wIndex].status |=
+				USB_PORT_STAT_C_RESET << 16;
+			info->ports[wIndex].status &= ~USB_PORT_STAT_RESET;
+
+			if (info->devices[wIndex].status !=
+			    USB_STATE_NOTATTACHED) {
+				info->ports[wIndex].status |=
+					USB_PORT_STAT_ENABLE;
+				info->devices[wIndex].status =
+					USB_STATE_DEFAULT;
+			}
+
+			switch (info->devices[wIndex].speed) {
+			case XENUSB_SPEED_LOW:
+				info->ports[wIndex].status |=
+					USB_PORT_STAT_LOW_SPEED;
+				break;
+			case XENUSB_SPEED_HIGH:
+				info->ports[wIndex].status |=
+					USB_PORT_STAT_HIGH_SPEED;
+				break;
+			default:
+				break;
+			}
+		}
+
+		*(__le32 *)buf = cpu_to_le32(info->ports[wIndex].status);
+		break;
+	case SetPortFeature:
+		if (!wIndex || wIndex > ports)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_POWER:
+			xenhcd_rhport_power_on(info, wIndex);
+			break;
+		case USB_PORT_FEAT_RESET:
+			xenhcd_rhport_reset(info, wIndex);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			xenhcd_rhport_suspend(info, wIndex);
+			break;
+		default:
+			if (info->ports[wIndex-1].status & USB_PORT_STAT_POWER)
+				info->ports[wIndex-1].status |= (1 << wValue);
+		}
+		break;
+
+	case SetHubFeature:
+		/* not supported */
+	default:
+error:
+		ret = -EPIPE;
+	}
+	spin_unlock_irqrestore(&info->lock, flags);
+
+	/* check status for each port */
+	for (i = 0; i < ports; i++) {
+		if (info->ports[i].status & PORT_C_MASK)
+			changed = 1;
+	}
+	if (changed)
+		usb_hcd_poll_rh_status(hcd);
+
+	return ret;
+}
+
+static void xenhcd_free_urb_priv(struct urb_priv *urbp)
+{
+	urbp->urb->hcpriv = NULL;
+	kmem_cache_free(xenhcd_urbp_cachep, urbp);
+}
+
+static inline unsigned int xenhcd_get_id_from_freelist(struct xenhcd_info *info)
+{
+	unsigned int free;
+
+	free = info->shadow_free;
+	info->shadow_free = info->shadow[free].req.id;
+	info->shadow[free].req.id = 0x0fff; /* debug */
+	return free;
+}
+
+static inline void xenhcd_add_id_to_freelist(struct xenhcd_info *info,
+					     unsigned int id)
+{
+	info->shadow[id].req.id	= info->shadow_free;
+	info->shadow[id].urb = NULL;
+	info->shadow_free = id;
+}
+
+static inline int xenhcd_count_pages(void *addr, int length)
+{
+	unsigned long vaddr = (unsigned long)addr;
+
+	return PFN_UP(vaddr + length) - PFN_DOWN(vaddr);
+}
+
+static void xenhcd_gnttab_map(struct xenhcd_info *info, void *addr, int length,
+			      grant_ref_t *gref_head,
+			      struct xenusb_request_segment *seg,
+			      int nr_pages, int flags)
+{
+	grant_ref_t ref;
+	unsigned int offset;
+	unsigned int len = length;
+	unsigned int bytes;
+	int i;
+
+	for (i = 0; i < nr_pages; i++) {
+		offset = offset_in_page(addr);
+
+		bytes = PAGE_SIZE - offset;
+		if (bytes > len)
+			bytes = len;
+
+		ref = gnttab_claim_grant_reference(gref_head);
+		gnttab_grant_foreign_access_ref(ref, info->xbdev->otherend_id,
+						virt_to_gfn(addr), flags);
+		seg[i].gref = ref;
+		seg[i].offset = (__u16)offset;
+		seg[i].length = (__u16)bytes;
+
+		addr += bytes;
+		len -= bytes;
+	}
+}
+
+static __u32 xenhcd_pipe_urb_to_xenusb(__u32 urb_pipe, __u8 port)
+{
+	static __u32 pipe;
+
+	pipe = usb_pipedevice(urb_pipe) << XENUSB_PIPE_DEV_SHIFT;
+	pipe |= usb_pipeendpoint(urb_pipe) << XENUSB_PIPE_EP_SHIFT;
+	if (usb_pipein(urb_pipe))
+		pipe |= XENUSB_PIPE_DIR;
+	switch (usb_pipetype(urb_pipe)) {
+	case PIPE_ISOCHRONOUS:
+		pipe |= XENUSB_PIPE_TYPE_ISOC << XENUSB_PIPE_TYPE_SHIFT;
+		break;
+	case PIPE_INTERRUPT:
+		pipe |= XENUSB_PIPE_TYPE_INT << XENUSB_PIPE_TYPE_SHIFT;
+		break;
+	case PIPE_CONTROL:
+		pipe |= XENUSB_PIPE_TYPE_CTRL << XENUSB_PIPE_TYPE_SHIFT;
+		break;
+	case PIPE_BULK:
+		pipe |= XENUSB_PIPE_TYPE_BULK << XENUSB_PIPE_TYPE_SHIFT;
+		break;
+	}
+	pipe = xenusb_setportnum_pipe(pipe, port);
+
+	return pipe;
+}
+
+static int xenhcd_map_urb_for_request(struct xenhcd_info *info, struct urb *urb,
+				      struct xenusb_urb_request *req)
+{
+	grant_ref_t gref_head;
+	int nr_buff_pages = 0;
+	int nr_isodesc_pages = 0;
+	int nr_grants = 0;
+
+	if (urb->transfer_buffer_length) {
+		nr_buff_pages = xenhcd_count_pages(urb->transfer_buffer,
+						urb->transfer_buffer_length);
+
+		if (usb_pipeisoc(urb->pipe))
+			nr_isodesc_pages = xenhcd_count_pages(
+				&urb->iso_frame_desc[0],
+				sizeof(struct usb_iso_packet_descriptor) *
+				urb->number_of_packets);
+
+		nr_grants = nr_buff_pages + nr_isodesc_pages;
+		if (nr_grants > XENUSB_MAX_SEGMENTS_PER_REQUEST) {
+			pr_err("xenhcd: error: %d grants\n", nr_grants);
+			return -E2BIG;
+		}
+
+		if (gnttab_alloc_grant_references(nr_grants, &gref_head)) {
+			pr_err("xenhcd: gnttab_alloc_grant_references() error\n");
+			return -ENOMEM;
+		}
+
+		xenhcd_gnttab_map(info, urb->transfer_buffer,
+				  urb->transfer_buffer_length, &gref_head,
+				  &req->seg[0], nr_buff_pages,
+				  usb_pipein(urb->pipe) ? 0 : GTF_readonly);
+	}
+
+	req->pipe = xenhcd_pipe_urb_to_xenusb(urb->pipe, urb->dev->portnum);
+	req->transfer_flags = 0;
+	if (urb->transfer_flags & URB_SHORT_NOT_OK)
+		req->transfer_flags |= XENUSB_SHORT_NOT_OK;
+	req->buffer_length = urb->transfer_buffer_length;
+	req->nr_buffer_segs = nr_buff_pages;
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_ISOCHRONOUS:
+		req->u.isoc.interval = urb->interval;
+		req->u.isoc.start_frame = urb->start_frame;
+		req->u.isoc.number_of_packets = urb->number_of_packets;
+		req->u.isoc.nr_frame_desc_segs = nr_isodesc_pages;
+
+		xenhcd_gnttab_map(info, &urb->iso_frame_desc[0],
+				  sizeof(struct usb_iso_packet_descriptor) *
+				  urb->number_of_packets,
+				  &gref_head, &req->seg[nr_buff_pages],
+				  nr_isodesc_pages, 0);
+		break;
+	case PIPE_INTERRUPT:
+		req->u.intr.interval = urb->interval;
+		break;
+	case PIPE_CONTROL:
+		if (urb->setup_packet)
+			memcpy(req->u.ctrl, urb->setup_packet, 8);
+		break;
+	case PIPE_BULK:
+		break;
+	default:
+		break;
+	}
+
+	if (nr_grants)
+		gnttab_free_grant_references(gref_head);
+
+	return 0;
+}
+
+static void xenhcd_gnttab_done(struct xenhcd_info *info, unsigned int id)
+{
+	struct usb_shadow *shadow = info->shadow + id;
+	int nr_segs = 0;
+	int i;
+
+	if (!shadow->in_flight) {
+		xenhcd_set_error(info, "Illegal request id");
+		return;
+	}
+	shadow->in_flight = false;
+
+	nr_segs = shadow->req.nr_buffer_segs;
+
+	if (xenusb_pipeisoc(shadow->req.pipe))
+		nr_segs += shadow->req.u.isoc.nr_frame_desc_segs;
+
+	for (i = 0; i < nr_segs; i++) {
+		if (!gnttab_try_end_foreign_access(shadow->req.seg[i].gref))
+			xenhcd_set_error(info, "backend didn't release grant");
+	}
+
+	shadow->req.nr_buffer_segs = 0;
+	shadow->req.u.isoc.nr_frame_desc_segs = 0;
+}
+
+static int xenhcd_translate_status(int status)
+{
+	switch (status) {
+	case XENUSB_STATUS_OK:
+		return 0;
+	case XENUSB_STATUS_NODEV:
+		return -ENODEV;
+	case XENUSB_STATUS_INVAL:
+		return -EINVAL;
+	case XENUSB_STATUS_STALL:
+		return -EPIPE;
+	case XENUSB_STATUS_IOERROR:
+		return -EPROTO;
+	case XENUSB_STATUS_BABBLE:
+		return -EOVERFLOW;
+	default:
+		return -ESHUTDOWN;
+	}
+}
+
+static void xenhcd_giveback_urb(struct xenhcd_info *info, struct urb *urb,
+				int status)
+{
+	struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
+	int priv_status = urbp->status;
+
+	list_del_init(&urbp->list);
+	xenhcd_free_urb_priv(urbp);
+
+	if (urb->status == -EINPROGRESS)
+		urb->status = xenhcd_translate_status(status);
+
+	spin_unlock(&info->lock);
+	usb_hcd_giveback_urb(xenhcd_info_to_hcd(info), urb,
+			     priv_status <= 0 ? priv_status : urb->status);
+	spin_lock(&info->lock);
+}
+
+static int xenhcd_do_request(struct xenhcd_info *info, struct urb_priv *urbp)
+{
+	struct xenusb_urb_request *req;
+	struct urb *urb = urbp->urb;
+	unsigned int id;
+	int notify;
+	int ret;
+
+	id = xenhcd_get_id_from_freelist(info);
+	req = &info->shadow[id].req;
+	req->id = id;
+
+	if (unlikely(urbp->unlinked)) {
+		req->u.unlink.unlink_id = urbp->req_id;
+		req->pipe = xenusb_setunlink_pipe(xenhcd_pipe_urb_to_xenusb(
+						 urb->pipe, urb->dev->portnum));
+		urbp->unlink_req_id = id;
+	} else {
+		ret = xenhcd_map_urb_for_request(info, urb, req);
+		if (ret) {
+			xenhcd_add_id_to_freelist(info, id);
+			return ret;
+		}
+		urbp->req_id = id;
+	}
+
+	req = RING_GET_REQUEST(&info->urb_ring, info->urb_ring.req_prod_pvt);
+	*req = info->shadow[id].req;
+
+	info->urb_ring.req_prod_pvt++;
+	info->shadow[id].urb = urb;
+	info->shadow[id].in_flight = true;
+
+	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&info->urb_ring, notify);
+	if (notify)
+		notify_remote_via_irq(info->irq);
+
+	return 0;
+}
+
+static void xenhcd_kick_pending_urbs(struct xenhcd_info *info)
+{
+	struct urb_priv *urbp;
+
+	while (!list_empty(&info->pending_submit_list)) {
+		if (RING_FULL(&info->urb_ring)) {
+			xenhcd_timer_action(info, TIMER_RING_WATCHDOG);
+			return;
+		}
+
+		urbp = list_entry(info->pending_submit_list.next,
+				  struct urb_priv, list);
+		if (!xenhcd_do_request(info, urbp))
+			list_move_tail(&urbp->list, &info->in_progress_list);
+		else
+			xenhcd_giveback_urb(info, urbp->urb, -ESHUTDOWN);
+	}
+	xenhcd_timer_action_done(info, TIMER_SCAN_PENDING_URBS);
+}
+
+/*
+ * caller must lock info->lock
+ */
+static void xenhcd_cancel_all_enqueued_urbs(struct xenhcd_info *info)
+{
+	struct urb_priv *urbp, *tmp;
+	int req_id;
+
+	list_for_each_entry_safe(urbp, tmp, &info->in_progress_list, list) {
+		req_id = urbp->req_id;
+		if (!urbp->unlinked) {
+			xenhcd_gnttab_done(info, req_id);
+			if (info->error)
+				return;
+			if (urbp->urb->status == -EINPROGRESS)
+				/* not dequeued */
+				xenhcd_giveback_urb(info, urbp->urb,
+						    -ESHUTDOWN);
+			else	/* dequeued */
+				xenhcd_giveback_urb(info, urbp->urb,
+						    urbp->urb->status);
+		}
+		info->shadow[req_id].urb = NULL;
+	}
+
+	list_for_each_entry_safe(urbp, tmp, &info->pending_submit_list, list)
+		xenhcd_giveback_urb(info, urbp->urb, -ESHUTDOWN);
+}
+
+/*
+ * caller must lock info->lock
+ */
+static void xenhcd_giveback_unlinked_urbs(struct xenhcd_info *info)
+{
+	struct urb_priv *urbp, *tmp;
+
+	list_for_each_entry_safe(urbp, tmp, &info->giveback_waiting_list, list)
+		xenhcd_giveback_urb(info, urbp->urb, urbp->urb->status);
+}
+
+static int xenhcd_submit_urb(struct xenhcd_info *info, struct urb_priv *urbp)
+{
+	int ret;
+
+	if (RING_FULL(&info->urb_ring)) {
+		list_add_tail(&urbp->list, &info->pending_submit_list);
+		xenhcd_timer_action(info, TIMER_RING_WATCHDOG);
+		return 0;
+	}
+
+	if (!list_empty(&info->pending_submit_list)) {
+		list_add_tail(&urbp->list, &info->pending_submit_list);
+		xenhcd_timer_action(info, TIMER_SCAN_PENDING_URBS);
+		return 0;
+	}
+
+	ret = xenhcd_do_request(info, urbp);
+	if (ret == 0)
+		list_add_tail(&urbp->list, &info->in_progress_list);
+
+	return ret;
+}
+
+static int xenhcd_unlink_urb(struct xenhcd_info *info, struct urb_priv *urbp)
+{
+	int ret;
+
+	/* already unlinked? */
+	if (urbp->unlinked)
+		return -EBUSY;
+
+	urbp->unlinked = true;
+
+	/* the urb is still in pending_submit queue */
+	if (urbp->req_id == ~0) {
+		list_move_tail(&urbp->list, &info->giveback_waiting_list);
+		xenhcd_timer_action(info, TIMER_SCAN_PENDING_URBS);
+		return 0;
+	}
+
+	/* send unlink request to backend */
+	if (RING_FULL(&info->urb_ring)) {
+		list_move_tail(&urbp->list, &info->pending_unlink_list);
+		xenhcd_timer_action(info, TIMER_RING_WATCHDOG);
+		return 0;
+	}
+
+	if (!list_empty(&info->pending_unlink_list)) {
+		list_move_tail(&urbp->list, &info->pending_unlink_list);
+		xenhcd_timer_action(info, TIMER_SCAN_PENDING_URBS);
+		return 0;
+	}
+
+	ret = xenhcd_do_request(info, urbp);
+	if (ret == 0)
+		list_move_tail(&urbp->list, &info->in_progress_list);
+
+	return ret;
+}
+
+static void xenhcd_res_to_urb(struct xenhcd_info *info,
+			      struct xenusb_urb_response *res, struct urb *urb)
+{
+	if (unlikely(!urb))
+		return;
+
+	if (res->actual_length > urb->transfer_buffer_length)
+		urb->actual_length = urb->transfer_buffer_length;
+	else if (res->actual_length < 0)
+		urb->actual_length = 0;
+	else
+		urb->actual_length = res->actual_length;
+	urb->error_count = res->error_count;
+	urb->start_frame = res->start_frame;
+	xenhcd_giveback_urb(info, urb, res->status);
+}
+
+static int xenhcd_urb_request_done(struct xenhcd_info *info,
+				   unsigned int *eoiflag)
+{
+	struct xenusb_urb_response res;
+	RING_IDX i, rp;
+	__u16 id;
+	int more_to_do = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock, flags);
+
+	rp = info->urb_ring.sring->rsp_prod;
+	if (RING_RESPONSE_PROD_OVERFLOW(&info->urb_ring, rp)) {
+		xenhcd_set_error(info, "Illegal index on urb-ring");
+		goto err;
+	}
+	rmb(); /* ensure we see queued responses up to "rp" */
+
+	for (i = info->urb_ring.rsp_cons; i != rp; i++) {
+		RING_COPY_RESPONSE(&info->urb_ring, i, &res);
+		id = res.id;
+		if (id >= XENUSB_URB_RING_SIZE) {
+			xenhcd_set_error(info, "Illegal data on urb-ring");
+			goto err;
+		}
+
+		if (likely(xenusb_pipesubmit(info->shadow[id].req.pipe))) {
+			xenhcd_gnttab_done(info, id);
+			if (info->error)
+				goto err;
+			xenhcd_res_to_urb(info, &res, info->shadow[id].urb);
+		}
+
+		xenhcd_add_id_to_freelist(info, id);
+
+		*eoiflag = 0;
+	}
+	info->urb_ring.rsp_cons = i;
+
+	if (i != info->urb_ring.req_prod_pvt)
+		RING_FINAL_CHECK_FOR_RESPONSES(&info->urb_ring, more_to_do);
+	else
+		info->urb_ring.sring->rsp_event = i + 1;
+
+	spin_unlock_irqrestore(&info->lock, flags);
+
+	return more_to_do;
+
+ err:
+	spin_unlock_irqrestore(&info->lock, flags);
+	return 0;
+}
+
+static int xenhcd_conn_notify(struct xenhcd_info *info, unsigned int *eoiflag)
+{
+	struct xenusb_conn_response res;
+	struct xenusb_conn_request *req;
+	RING_IDX rc, rp;
+	__u16 id;
+	__u8 portnum, speed;
+	int more_to_do = 0;
+	int notify;
+	int port_changed = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock, flags);
+
+	rc = info->conn_ring.rsp_cons;
+	rp = info->conn_ring.sring->rsp_prod;
+	if (RING_RESPONSE_PROD_OVERFLOW(&info->conn_ring, rp)) {
+		xenhcd_set_error(info, "Illegal index on conn-ring");
+		spin_unlock_irqrestore(&info->lock, flags);
+		return 0;
+	}
+	rmb(); /* ensure we see queued responses up to "rp" */
+
+	while (rc != rp) {
+		RING_COPY_RESPONSE(&info->conn_ring, rc, &res);
+		id = res.id;
+		portnum = res.portnum;
+		speed = res.speed;
+		info->conn_ring.rsp_cons = ++rc;
+
+		if (xenhcd_rhport_connect(info, portnum, speed)) {
+			xenhcd_set_error(info, "Illegal data on conn-ring");
+			spin_unlock_irqrestore(&info->lock, flags);
+			return 0;
+		}
+
+		if (info->ports[portnum - 1].c_connection)
+			port_changed = 1;
+
+		barrier();
+
+		req = RING_GET_REQUEST(&info->conn_ring,
+				       info->conn_ring.req_prod_pvt);
+		req->id = id;
+		info->conn_ring.req_prod_pvt++;
+
+		*eoiflag = 0;
+	}
+
+	if (rc != info->conn_ring.req_prod_pvt)
+		RING_FINAL_CHECK_FOR_RESPONSES(&info->conn_ring, more_to_do);
+	else
+		info->conn_ring.sring->rsp_event = rc + 1;
+
+	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&info->conn_ring, notify);
+	if (notify)
+		notify_remote_via_irq(info->irq);
+
+	spin_unlock_irqrestore(&info->lock, flags);
+
+	if (port_changed)
+		usb_hcd_poll_rh_status(xenhcd_info_to_hcd(info));
+
+	return more_to_do;
+}
+
+static irqreturn_t xenhcd_int(int irq, void *dev_id)
+{
+	struct xenhcd_info *info = (struct xenhcd_info *)dev_id;
+	unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
+
+	if (unlikely(info->error)) {
+		xen_irq_lateeoi(irq, XEN_EOI_FLAG_SPURIOUS);
+		return IRQ_HANDLED;
+	}
+
+	while (xenhcd_urb_request_done(info, &eoiflag) |
+	       xenhcd_conn_notify(info, &eoiflag))
+		/* Yield point for this unbounded loop. */
+		cond_resched();
+
+	xen_irq_lateeoi(irq, eoiflag);
+	return IRQ_HANDLED;
+}
+
+static void xenhcd_destroy_rings(struct xenhcd_info *info)
+{
+	if (info->irq)
+		unbind_from_irqhandler(info->irq, info);
+	info->irq = 0;
+
+	xenbus_teardown_ring((void **)&info->urb_ring.sring, 1,
+			     &info->urb_ring_ref);
+	xenbus_teardown_ring((void **)&info->conn_ring.sring, 1,
+			     &info->conn_ring_ref);
+}
+
+static int xenhcd_setup_rings(struct xenbus_device *dev,
+			      struct xenhcd_info *info)
+{
+	struct xenusb_urb_sring *urb_sring;
+	struct xenusb_conn_sring *conn_sring;
+	int err;
+
+	info->conn_ring_ref = INVALID_GRANT_REF;
+	err = xenbus_setup_ring(dev, GFP_NOIO | __GFP_HIGH,
+				(void **)&urb_sring, 1, &info->urb_ring_ref);
+	if (err) {
+		xenbus_dev_fatal(dev, err, "allocating urb ring");
+		return err;
+	}
+	XEN_FRONT_RING_INIT(&info->urb_ring, urb_sring, PAGE_SIZE);
+
+	err = xenbus_setup_ring(dev, GFP_NOIO | __GFP_HIGH,
+				(void **)&conn_sring, 1, &info->conn_ring_ref);
+	if (err) {
+		xenbus_dev_fatal(dev, err, "allocating conn ring");
+		goto fail;
+	}
+	XEN_FRONT_RING_INIT(&info->conn_ring, conn_sring, PAGE_SIZE);
+
+	err = xenbus_alloc_evtchn(dev, &info->evtchn);
+	if (err) {
+		xenbus_dev_fatal(dev, err, "xenbus_alloc_evtchn");
+		goto fail;
+	}
+
+	err = bind_evtchn_to_irq_lateeoi(info->evtchn);
+	if (err <= 0) {
+		xenbus_dev_fatal(dev, err, "bind_evtchn_to_irq_lateeoi");
+		goto fail;
+	}
+
+	info->irq = err;
+
+	err = request_threaded_irq(info->irq, NULL, xenhcd_int,
+				   IRQF_ONESHOT, "xenhcd", info);
+	if (err) {
+		xenbus_dev_fatal(dev, err, "request_threaded_irq");
+		goto free_irq;
+	}
+
+	return 0;
+
+free_irq:
+	unbind_from_irqhandler(info->irq, info);
+fail:
+	xenhcd_destroy_rings(info);
+	return err;
+}
+
+static int xenhcd_talk_to_backend(struct xenbus_device *dev,
+				  struct xenhcd_info *info)
+{
+	const char *message;
+	struct xenbus_transaction xbt;
+	int err;
+
+	err = xenhcd_setup_rings(dev, info);
+	if (err)
+		return err;
+
+again:
+	err = xenbus_transaction_start(&xbt);
+	if (err) {
+		xenbus_dev_fatal(dev, err, "starting transaction");
+		goto destroy_ring;
+	}
+
+	err = xenbus_printf(xbt, dev->nodename, "urb-ring-ref", "%u",
+			    info->urb_ring_ref);
+	if (err) {
+		message = "writing urb-ring-ref";
+		goto abort_transaction;
+	}
+
+	err = xenbus_printf(xbt, dev->nodename, "conn-ring-ref", "%u",
+			    info->conn_ring_ref);
+	if (err) {
+		message = "writing conn-ring-ref";
+		goto abort_transaction;
+	}
+
+	err = xenbus_printf(xbt, dev->nodename, "event-channel", "%u",
+			    info->evtchn);
+	if (err) {
+		message = "writing event-channel";
+		goto abort_transaction;
+	}
+
+	err = xenbus_transaction_end(xbt, 0);
+	if (err) {
+		if (err == -EAGAIN)
+			goto again;
+		xenbus_dev_fatal(dev, err, "completing transaction");
+		goto destroy_ring;
+	}
+
+	return 0;
+
+abort_transaction:
+	xenbus_transaction_end(xbt, 1);
+	xenbus_dev_fatal(dev, err, "%s", message);
+
+destroy_ring:
+	xenhcd_destroy_rings(info);
+
+	return err;
+}
+
+static int xenhcd_connect(struct xenbus_device *dev)
+{
+	struct xenhcd_info *info = dev_get_drvdata(&dev->dev);
+	struct xenusb_conn_request *req;
+	int idx, err;
+	int notify;
+	char name[TASK_COMM_LEN];
+	struct usb_hcd *hcd;
+
+	hcd = xenhcd_info_to_hcd(info);
+	snprintf(name, TASK_COMM_LEN, "xenhcd.%d", hcd->self.busnum);
+
+	err = xenhcd_talk_to_backend(dev, info);
+	if (err)
+		return err;
+
+	/* prepare ring for hotplug notification */
+	for (idx = 0; idx < XENUSB_CONN_RING_SIZE; idx++) {
+		req = RING_GET_REQUEST(&info->conn_ring, idx);
+		req->id = idx;
+	}
+	info->conn_ring.req_prod_pvt = idx;
+
+	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&info->conn_ring, notify);
+	if (notify)
+		notify_remote_via_irq(info->irq);
+
+	return 0;
+}
+
+static void xenhcd_disconnect(struct xenbus_device *dev)
+{
+	struct xenhcd_info *info = dev_get_drvdata(&dev->dev);
+	struct usb_hcd *hcd = xenhcd_info_to_hcd(info);
+
+	usb_remove_hcd(hcd);
+	xenbus_frontend_closed(dev);
+}
+
+static void xenhcd_watchdog(struct timer_list *timer)
+{
+	struct xenhcd_info *info = from_timer(info, timer, watchdog);
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock, flags);
+	if (likely(HC_IS_RUNNING(xenhcd_info_to_hcd(info)->state))) {
+		xenhcd_timer_action_done(info, TIMER_RING_WATCHDOG);
+		xenhcd_giveback_unlinked_urbs(info);
+		xenhcd_kick_pending_urbs(info);
+	}
+	spin_unlock_irqrestore(&info->lock, flags);
+}
+
+/*
+ * one-time HC init
+ */
+static int xenhcd_setup(struct usb_hcd *hcd)
+{
+	struct xenhcd_info *info = xenhcd_hcd_to_info(hcd);
+
+	spin_lock_init(&info->lock);
+	INIT_LIST_HEAD(&info->pending_submit_list);
+	INIT_LIST_HEAD(&info->pending_unlink_list);
+	INIT_LIST_HEAD(&info->in_progress_list);
+	INIT_LIST_HEAD(&info->giveback_waiting_list);
+	timer_setup(&info->watchdog, xenhcd_watchdog, 0);
+
+	hcd->has_tt = (hcd->driver->flags & HCD_MASK) != HCD_USB11;
+
+	return 0;
+}
+
+/*
+ * start HC running
+ */
+static int xenhcd_run(struct usb_hcd *hcd)
+{
+	hcd->uses_new_polling = 1;
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	hcd->state = HC_STATE_RUNNING;
+	return 0;
+}
+
+/*
+ * stop running HC
+ */
+static void xenhcd_stop(struct usb_hcd *hcd)
+{
+	struct xenhcd_info *info = xenhcd_hcd_to_info(hcd);
+
+	del_timer_sync(&info->watchdog);
+	spin_lock_irq(&info->lock);
+	/* cancel all urbs */
+	hcd->state = HC_STATE_HALT;
+	xenhcd_cancel_all_enqueued_urbs(info);
+	xenhcd_giveback_unlinked_urbs(info);
+	spin_unlock_irq(&info->lock);
+}
+
+/*
+ * called as .urb_enqueue()
+ * non-error returns are promise to giveback the urb later
+ */
+static int xenhcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+			      gfp_t mem_flags)
+{
+	struct xenhcd_info *info = xenhcd_hcd_to_info(hcd);
+	struct urb_priv *urbp;
+	unsigned long flags;
+	int ret;
+
+	if (unlikely(info->error))
+		return -ESHUTDOWN;
+
+	urbp = kmem_cache_zalloc(xenhcd_urbp_cachep, mem_flags);
+	if (!urbp)
+		return -ENOMEM;
+
+	spin_lock_irqsave(&info->lock, flags);
+
+	urbp->urb = urb;
+	urb->hcpriv = urbp;
+	urbp->req_id = ~0;
+	urbp->unlink_req_id = ~0;
+	INIT_LIST_HEAD(&urbp->list);
+	urbp->status = 1;
+	urb->unlinked = false;
+
+	ret = xenhcd_submit_urb(info, urbp);
+
+	if (ret)
+		xenhcd_free_urb_priv(urbp);
+
+	spin_unlock_irqrestore(&info->lock, flags);
+
+	return ret;
+}
+
+/*
+ * called as .urb_dequeue()
+ */
+static int xenhcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct xenhcd_info *info = xenhcd_hcd_to_info(hcd);
+	struct urb_priv *urbp;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&info->lock, flags);
+
+	urbp = urb->hcpriv;
+	if (urbp) {
+		urbp->status = status;
+		ret = xenhcd_unlink_urb(info, urbp);
+	}
+
+	spin_unlock_irqrestore(&info->lock, flags);
+
+	return ret;
+}
+
+/*
+ * called from usb_get_current_frame_number(),
+ * but, almost all drivers not use such function.
+ */
+static int xenhcd_get_frame(struct usb_hcd *hcd)
+{
+	/* it means error, but probably no problem :-) */
+	return 0;
+}
+
+static struct hc_driver xenhcd_usb20_hc_driver = {
+	.description = "xen-hcd",
+	.product_desc = "Xen USB2.0 Virtual Host Controller",
+	.hcd_priv_size = sizeof(struct xenhcd_info),
+	.flags = HCD_USB2,
+
+	/* basic HC lifecycle operations */
+	.reset = xenhcd_setup,
+	.start = xenhcd_run,
+	.stop = xenhcd_stop,
+
+	/* managing urb I/O */
+	.urb_enqueue = xenhcd_urb_enqueue,
+	.urb_dequeue = xenhcd_urb_dequeue,
+	.get_frame_number = xenhcd_get_frame,
+
+	/* root hub operations */
+	.hub_status_data = xenhcd_hub_status_data,
+	.hub_control = xenhcd_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend = xenhcd_bus_suspend,
+	.bus_resume = xenhcd_bus_resume,
+#endif
+};
+
+static struct hc_driver xenhcd_usb11_hc_driver = {
+	.description = "xen-hcd",
+	.product_desc = "Xen USB1.1 Virtual Host Controller",
+	.hcd_priv_size = sizeof(struct xenhcd_info),
+	.flags = HCD_USB11,
+
+	/* basic HC lifecycle operations */
+	.reset = xenhcd_setup,
+	.start = xenhcd_run,
+	.stop = xenhcd_stop,
+
+	/* managing urb I/O */
+	.urb_enqueue = xenhcd_urb_enqueue,
+	.urb_dequeue = xenhcd_urb_dequeue,
+	.get_frame_number = xenhcd_get_frame,
+
+	/* root hub operations */
+	.hub_status_data = xenhcd_hub_status_data,
+	.hub_control = xenhcd_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend = xenhcd_bus_suspend,
+	.bus_resume = xenhcd_bus_resume,
+#endif
+};
+
+static struct usb_hcd *xenhcd_create_hcd(struct xenbus_device *dev)
+{
+	int i;
+	int err = 0;
+	int num_ports;
+	int usb_ver;
+	struct usb_hcd *hcd = NULL;
+	struct xenhcd_info *info;
+
+	err = xenbus_scanf(XBT_NIL, dev->otherend, "num-ports", "%d",
+			   &num_ports);
+	if (err != 1) {
+		xenbus_dev_fatal(dev, err, "reading num-ports");
+		return ERR_PTR(-EINVAL);
+	}
+	if (num_ports < 1 || num_ports > XENUSB_MAX_PORTNR) {
+		xenbus_dev_fatal(dev, err, "invalid num-ports");
+		return ERR_PTR(-EINVAL);
+	}
+
+	err = xenbus_scanf(XBT_NIL, dev->otherend, "usb-ver", "%d", &usb_ver);
+	if (err != 1) {
+		xenbus_dev_fatal(dev, err, "reading usb-ver");
+		return ERR_PTR(-EINVAL);
+	}
+	switch (usb_ver) {
+	case XENUSB_VER_USB11:
+		hcd = usb_create_hcd(&xenhcd_usb11_hc_driver, &dev->dev,
+				     dev_name(&dev->dev));
+		break;
+	case XENUSB_VER_USB20:
+		hcd = usb_create_hcd(&xenhcd_usb20_hc_driver, &dev->dev,
+				     dev_name(&dev->dev));
+		break;
+	default:
+		xenbus_dev_fatal(dev, err, "invalid usb-ver");
+		return ERR_PTR(-EINVAL);
+	}
+	if (!hcd) {
+		xenbus_dev_fatal(dev, err,
+				 "fail to allocate USB host controller");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	info = xenhcd_hcd_to_info(hcd);
+	info->xbdev = dev;
+	info->rh_numports = num_ports;
+
+	for (i = 0; i < XENUSB_URB_RING_SIZE; i++) {
+		info->shadow[i].req.id = i + 1;
+		info->shadow[i].urb = NULL;
+		info->shadow[i].in_flight = false;
+	}
+	info->shadow[XENUSB_URB_RING_SIZE - 1].req.id = 0x0fff;
+
+	return hcd;
+}
+
+static void xenhcd_backend_changed(struct xenbus_device *dev,
+				   enum xenbus_state backend_state)
+{
+	switch (backend_state) {
+	case XenbusStateInitialising:
+	case XenbusStateReconfiguring:
+	case XenbusStateReconfigured:
+	case XenbusStateUnknown:
+		break;
+
+	case XenbusStateInitWait:
+	case XenbusStateInitialised:
+	case XenbusStateConnected:
+		if (dev->state != XenbusStateInitialising)
+			break;
+		if (!xenhcd_connect(dev))
+			xenbus_switch_state(dev, XenbusStateConnected);
+		break;
+
+	case XenbusStateClosed:
+		if (dev->state == XenbusStateClosed)
+			break;
+		fallthrough;	/* Missed the backend's Closing state. */
+	case XenbusStateClosing:
+		xenhcd_disconnect(dev);
+		break;
+
+	default:
+		xenbus_dev_fatal(dev, -EINVAL, "saw state %d at frontend",
+				 backend_state);
+		break;
+	}
+}
+
+static int xenhcd_remove(struct xenbus_device *dev)
+{
+	struct xenhcd_info *info = dev_get_drvdata(&dev->dev);
+	struct usb_hcd *hcd = xenhcd_info_to_hcd(info);
+
+	xenhcd_destroy_rings(info);
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+static int xenhcd_probe(struct xenbus_device *dev,
+			const struct xenbus_device_id *id)
+{
+	int err;
+	struct usb_hcd *hcd;
+	struct xenhcd_info *info;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	hcd = xenhcd_create_hcd(dev);
+	if (IS_ERR(hcd)) {
+		err = PTR_ERR(hcd);
+		xenbus_dev_fatal(dev, err,
+				 "fail to create usb host controller");
+		return err;
+	}
+
+	info = xenhcd_hcd_to_info(hcd);
+	dev_set_drvdata(&dev->dev, info);
+
+	err = usb_add_hcd(hcd, 0, 0);
+	if (err) {
+		xenbus_dev_fatal(dev, err, "fail to add USB host controller");
+		usb_put_hcd(hcd);
+		dev_set_drvdata(&dev->dev, NULL);
+	}
+
+	return err;
+}
+
+static const struct xenbus_device_id xenhcd_ids[] = {
+	{ "vusb" },
+	{ "" },
+};
+
+static struct xenbus_driver xenhcd_driver = {
+	.ids			= xenhcd_ids,
+	.probe			= xenhcd_probe,
+	.otherend_changed	= xenhcd_backend_changed,
+	.remove			= xenhcd_remove,
+};
+
+static int __init xenhcd_init(void)
+{
+	if (!xen_domain())
+		return -ENODEV;
+
+	xenhcd_urbp_cachep = kmem_cache_create("xenhcd_urb_priv",
+					sizeof(struct urb_priv), 0, 0, NULL);
+	if (!xenhcd_urbp_cachep) {
+		pr_err("xenhcd failed to create kmem cache\n");
+		return -ENOMEM;
+	}
+
+	return xenbus_register_frontend(&xenhcd_driver);
+}
+module_init(xenhcd_init);
+
+static void __exit xenhcd_exit(void)
+{
+	kmem_cache_destroy(xenhcd_urbp_cachep);
+	xenbus_unregister_driver(&xenhcd_driver);
+}
+module_exit(xenhcd_exit);
+
+MODULE_ALIAS("xen:vusb");
+MODULE_AUTHOR("Juergen Gross <jgross@suse.com>");
+MODULE_DESCRIPTION("Xen USB Virtual Host Controller driver (xen-hcd)");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
new file mode 100644
index 000000000..386abf266
--- /dev/null
+++ b/drivers/usb/host/xhci-dbg.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ */
+
+#include "xhci.h"
+
+char *xhci_get_slot_state(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *ctx)
+{
+	struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
+	int state = GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state));
+
+	return xhci_slot_state_string(state);
+}
+
+void xhci_dbg_trace(struct xhci_hcd *xhci, void (*trace)(struct va_format *),
+			const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+
+	va_start(args, fmt);
+	vaf.fmt = fmt;
+	vaf.va = &args;
+	xhci_dbg(xhci, "%pV\n", &vaf);
+	trace(&vaf);
+	va_end(args);
+}
+EXPORT_SYMBOL_GPL(xhci_dbg_trace);
diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c
new file mode 100644
index 000000000..f1367b53b
--- /dev/null
+++ b/drivers/usb/host/xhci-dbgcap.c
@@ -0,0 +1,1099 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xhci-dbgcap.c - xHCI debug capability support
+ *
+ * Copyright (C) 2017 Intel Corporation
+ *
+ * Author: Lu Baolu <baolu.lu@linux.intel.com>
+ */
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/nls.h>
+
+#include "xhci.h"
+#include "xhci-trace.h"
+#include "xhci-dbgcap.h"
+
+static void dbc_free_ctx(struct device *dev, struct xhci_container_ctx *ctx)
+{
+	if (!ctx)
+		return;
+	dma_free_coherent(dev, ctx->size, ctx->bytes, ctx->dma);
+	kfree(ctx);
+}
+
+/* we use only one segment for DbC rings */
+static void dbc_ring_free(struct device *dev, struct xhci_ring *ring)
+{
+	if (!ring)
+		return;
+
+	if (ring->first_seg && ring->first_seg->trbs) {
+		dma_free_coherent(dev, TRB_SEGMENT_SIZE,
+				  ring->first_seg->trbs,
+				  ring->first_seg->dma);
+		kfree(ring->first_seg);
+	}
+	kfree(ring);
+}
+
+static u32 xhci_dbc_populate_strings(struct dbc_str_descs *strings)
+{
+	struct usb_string_descriptor	*s_desc;
+	u32				string_length;
+
+	/* Serial string: */
+	s_desc = (struct usb_string_descriptor *)strings->serial;
+	utf8s_to_utf16s(DBC_STRING_SERIAL, strlen(DBC_STRING_SERIAL),
+			UTF16_LITTLE_ENDIAN, (wchar_t *)s_desc->wData,
+			DBC_MAX_STRING_LENGTH);
+
+	s_desc->bLength		= (strlen(DBC_STRING_SERIAL) + 1) * 2;
+	s_desc->bDescriptorType	= USB_DT_STRING;
+	string_length		= s_desc->bLength;
+	string_length		<<= 8;
+
+	/* Product string: */
+	s_desc = (struct usb_string_descriptor *)strings->product;
+	utf8s_to_utf16s(DBC_STRING_PRODUCT, strlen(DBC_STRING_PRODUCT),
+			UTF16_LITTLE_ENDIAN, (wchar_t *)s_desc->wData,
+			DBC_MAX_STRING_LENGTH);
+
+	s_desc->bLength		= (strlen(DBC_STRING_PRODUCT) + 1) * 2;
+	s_desc->bDescriptorType	= USB_DT_STRING;
+	string_length		+= s_desc->bLength;
+	string_length		<<= 8;
+
+	/* Manufacture string: */
+	s_desc = (struct usb_string_descriptor *)strings->manufacturer;
+	utf8s_to_utf16s(DBC_STRING_MANUFACTURER,
+			strlen(DBC_STRING_MANUFACTURER),
+			UTF16_LITTLE_ENDIAN, (wchar_t *)s_desc->wData,
+			DBC_MAX_STRING_LENGTH);
+
+	s_desc->bLength		= (strlen(DBC_STRING_MANUFACTURER) + 1) * 2;
+	s_desc->bDescriptorType	= USB_DT_STRING;
+	string_length		+= s_desc->bLength;
+	string_length		<<= 8;
+
+	/* String0: */
+	strings->string0[0]	= 4;
+	strings->string0[1]	= USB_DT_STRING;
+	strings->string0[2]	= 0x09;
+	strings->string0[3]	= 0x04;
+	string_length		+= 4;
+
+	return string_length;
+}
+
+static void xhci_dbc_init_contexts(struct xhci_dbc *dbc, u32 string_length)
+{
+	struct dbc_info_context	*info;
+	struct xhci_ep_ctx	*ep_ctx;
+	u32			dev_info;
+	dma_addr_t		deq, dma;
+	unsigned int		max_burst;
+
+	if (!dbc)
+		return;
+
+	/* Populate info Context: */
+	info			= (struct dbc_info_context *)dbc->ctx->bytes;
+	dma			= dbc->string_dma;
+	info->string0		= cpu_to_le64(dma);
+	info->manufacturer	= cpu_to_le64(dma + DBC_MAX_STRING_LENGTH);
+	info->product		= cpu_to_le64(dma + DBC_MAX_STRING_LENGTH * 2);
+	info->serial		= cpu_to_le64(dma + DBC_MAX_STRING_LENGTH * 3);
+	info->length		= cpu_to_le32(string_length);
+
+	/* Populate bulk out endpoint context: */
+	ep_ctx			= dbc_bulkout_ctx(dbc);
+	max_burst		= DBC_CTRL_MAXBURST(readl(&dbc->regs->control));
+	deq			= dbc_bulkout_enq(dbc);
+	ep_ctx->ep_info		= 0;
+	ep_ctx->ep_info2	= dbc_epctx_info2(BULK_OUT_EP, 1024, max_burst);
+	ep_ctx->deq		= cpu_to_le64(deq | dbc->ring_out->cycle_state);
+
+	/* Populate bulk in endpoint context: */
+	ep_ctx			= dbc_bulkin_ctx(dbc);
+	deq			= dbc_bulkin_enq(dbc);
+	ep_ctx->ep_info		= 0;
+	ep_ctx->ep_info2	= dbc_epctx_info2(BULK_IN_EP, 1024, max_burst);
+	ep_ctx->deq		= cpu_to_le64(deq | dbc->ring_in->cycle_state);
+
+	/* Set DbC context and info registers: */
+	lo_hi_writeq(dbc->ctx->dma, &dbc->regs->dccp);
+
+	dev_info = cpu_to_le32((DBC_VENDOR_ID << 16) | DBC_PROTOCOL);
+	writel(dev_info, &dbc->regs->devinfo1);
+
+	dev_info = cpu_to_le32((DBC_DEVICE_REV << 16) | DBC_PRODUCT_ID);
+	writel(dev_info, &dbc->regs->devinfo2);
+}
+
+static void xhci_dbc_giveback(struct dbc_request *req, int status)
+	__releases(&dbc->lock)
+	__acquires(&dbc->lock)
+{
+	struct xhci_dbc		*dbc = req->dbc;
+	struct device		*dev = dbc->dev;
+
+	list_del_init(&req->list_pending);
+	req->trb_dma = 0;
+	req->trb = NULL;
+
+	if (req->status == -EINPROGRESS)
+		req->status = status;
+
+	trace_xhci_dbc_giveback_request(req);
+
+	dma_unmap_single(dev,
+			 req->dma,
+			 req->length,
+			 dbc_ep_dma_direction(req));
+
+	/* Give back the transfer request: */
+	spin_unlock(&dbc->lock);
+	req->complete(dbc, req);
+	spin_lock(&dbc->lock);
+}
+
+static void xhci_dbc_flush_single_request(struct dbc_request *req)
+{
+	union xhci_trb	*trb = req->trb;
+
+	trb->generic.field[0]	= 0;
+	trb->generic.field[1]	= 0;
+	trb->generic.field[2]	= 0;
+	trb->generic.field[3]	&= cpu_to_le32(TRB_CYCLE);
+	trb->generic.field[3]	|= cpu_to_le32(TRB_TYPE(TRB_TR_NOOP));
+
+	xhci_dbc_giveback(req, -ESHUTDOWN);
+}
+
+static void xhci_dbc_flush_endpoint_requests(struct dbc_ep *dep)
+{
+	struct dbc_request	*req, *tmp;
+
+	list_for_each_entry_safe(req, tmp, &dep->list_pending, list_pending)
+		xhci_dbc_flush_single_request(req);
+}
+
+static void xhci_dbc_flush_requests(struct xhci_dbc *dbc)
+{
+	xhci_dbc_flush_endpoint_requests(&dbc->eps[BULK_OUT]);
+	xhci_dbc_flush_endpoint_requests(&dbc->eps[BULK_IN]);
+}
+
+struct dbc_request *
+dbc_alloc_request(struct xhci_dbc *dbc, unsigned int direction, gfp_t flags)
+{
+	struct dbc_request	*req;
+
+	if (direction != BULK_IN &&
+	    direction != BULK_OUT)
+		return NULL;
+
+	if (!dbc)
+		return NULL;
+
+	req = kzalloc(sizeof(*req), flags);
+	if (!req)
+		return NULL;
+
+	req->dbc = dbc;
+	INIT_LIST_HEAD(&req->list_pending);
+	INIT_LIST_HEAD(&req->list_pool);
+	req->direction = direction;
+
+	trace_xhci_dbc_alloc_request(req);
+
+	return req;
+}
+
+void
+dbc_free_request(struct dbc_request *req)
+{
+	trace_xhci_dbc_free_request(req);
+
+	kfree(req);
+}
+
+static void
+xhci_dbc_queue_trb(struct xhci_ring *ring, u32 field1,
+		   u32 field2, u32 field3, u32 field4)
+{
+	union xhci_trb		*trb, *next;
+
+	trb = ring->enqueue;
+	trb->generic.field[0]	= cpu_to_le32(field1);
+	trb->generic.field[1]	= cpu_to_le32(field2);
+	trb->generic.field[2]	= cpu_to_le32(field3);
+	trb->generic.field[3]	= cpu_to_le32(field4);
+
+	trace_xhci_dbc_gadget_ep_queue(ring, &trb->generic);
+
+	ring->num_trbs_free--;
+	next = ++(ring->enqueue);
+	if (TRB_TYPE_LINK_LE32(next->link.control)) {
+		next->link.control ^= cpu_to_le32(TRB_CYCLE);
+		ring->enqueue = ring->enq_seg->trbs;
+		ring->cycle_state ^= 1;
+	}
+}
+
+static int xhci_dbc_queue_bulk_tx(struct dbc_ep *dep,
+				  struct dbc_request *req)
+{
+	u64			addr;
+	union xhci_trb		*trb;
+	unsigned int		num_trbs;
+	struct xhci_dbc		*dbc = req->dbc;
+	struct xhci_ring	*ring = dep->ring;
+	u32			length, control, cycle;
+
+	num_trbs = count_trbs(req->dma, req->length);
+	WARN_ON(num_trbs != 1);
+	if (ring->num_trbs_free < num_trbs)
+		return -EBUSY;
+
+	addr	= req->dma;
+	trb	= ring->enqueue;
+	cycle	= ring->cycle_state;
+	length	= TRB_LEN(req->length);
+	control	= TRB_TYPE(TRB_NORMAL) | TRB_IOC;
+
+	if (cycle)
+		control &= cpu_to_le32(~TRB_CYCLE);
+	else
+		control |= cpu_to_le32(TRB_CYCLE);
+
+	req->trb = ring->enqueue;
+	req->trb_dma = xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue);
+	xhci_dbc_queue_trb(ring,
+			   lower_32_bits(addr),
+			   upper_32_bits(addr),
+			   length, control);
+
+	/*
+	 * Add a barrier between writes of trb fields and flipping
+	 * the cycle bit:
+	 */
+	wmb();
+
+	if (cycle)
+		trb->generic.field[3] |= cpu_to_le32(TRB_CYCLE);
+	else
+		trb->generic.field[3] &= cpu_to_le32(~TRB_CYCLE);
+
+	writel(DBC_DOOR_BELL_TARGET(dep->direction), &dbc->regs->doorbell);
+
+	return 0;
+}
+
+static int
+dbc_ep_do_queue(struct dbc_request *req)
+{
+	int			ret;
+	struct xhci_dbc		*dbc = req->dbc;
+	struct device		*dev = dbc->dev;
+	struct dbc_ep		*dep = &dbc->eps[req->direction];
+
+	if (!req->length || !req->buf)
+		return -EINVAL;
+
+	req->actual		= 0;
+	req->status		= -EINPROGRESS;
+
+	req->dma = dma_map_single(dev,
+				  req->buf,
+				  req->length,
+				  dbc_ep_dma_direction(dep));
+	if (dma_mapping_error(dev, req->dma)) {
+		dev_err(dbc->dev, "failed to map buffer\n");
+		return -EFAULT;
+	}
+
+	ret = xhci_dbc_queue_bulk_tx(dep, req);
+	if (ret) {
+		dev_err(dbc->dev, "failed to queue trbs\n");
+		dma_unmap_single(dev,
+				 req->dma,
+				 req->length,
+				 dbc_ep_dma_direction(dep));
+		return -EFAULT;
+	}
+
+	list_add_tail(&req->list_pending, &dep->list_pending);
+
+	return 0;
+}
+
+int dbc_ep_queue(struct dbc_request *req)
+{
+	unsigned long		flags;
+	struct xhci_dbc		*dbc = req->dbc;
+	int			ret = -ESHUTDOWN;
+
+	if (!dbc)
+		return -ENODEV;
+
+	if (req->direction != BULK_IN &&
+	    req->direction != BULK_OUT)
+		return -EINVAL;
+
+	spin_lock_irqsave(&dbc->lock, flags);
+	if (dbc->state == DS_CONFIGURED)
+		ret = dbc_ep_do_queue(req);
+	spin_unlock_irqrestore(&dbc->lock, flags);
+
+	mod_delayed_work(system_wq, &dbc->event_work, 0);
+
+	trace_xhci_dbc_queue_request(req);
+
+	return ret;
+}
+
+static inline void xhci_dbc_do_eps_init(struct xhci_dbc *dbc, bool direction)
+{
+	struct dbc_ep		*dep;
+
+	dep			= &dbc->eps[direction];
+	dep->dbc		= dbc;
+	dep->direction		= direction;
+	dep->ring		= direction ? dbc->ring_in : dbc->ring_out;
+
+	INIT_LIST_HEAD(&dep->list_pending);
+}
+
+static void xhci_dbc_eps_init(struct xhci_dbc *dbc)
+{
+	xhci_dbc_do_eps_init(dbc, BULK_OUT);
+	xhci_dbc_do_eps_init(dbc, BULK_IN);
+}
+
+static void xhci_dbc_eps_exit(struct xhci_dbc *dbc)
+{
+	memset(dbc->eps, 0, sizeof(struct dbc_ep) * ARRAY_SIZE(dbc->eps));
+}
+
+static int dbc_erst_alloc(struct device *dev, struct xhci_ring *evt_ring,
+		    struct xhci_erst *erst, gfp_t flags)
+{
+	erst->entries = dma_alloc_coherent(dev, sizeof(struct xhci_erst_entry),
+					   &erst->erst_dma_addr, flags);
+	if (!erst->entries)
+		return -ENOMEM;
+
+	erst->num_entries = 1;
+	erst->entries[0].seg_addr = cpu_to_le64(evt_ring->first_seg->dma);
+	erst->entries[0].seg_size = cpu_to_le32(TRBS_PER_SEGMENT);
+	erst->entries[0].rsvd = 0;
+	return 0;
+}
+
+static void dbc_erst_free(struct device *dev, struct xhci_erst *erst)
+{
+	if (erst->entries)
+		dma_free_coherent(dev, sizeof(struct xhci_erst_entry),
+				  erst->entries, erst->erst_dma_addr);
+	erst->entries = NULL;
+}
+
+static struct xhci_container_ctx *
+dbc_alloc_ctx(struct device *dev, gfp_t flags)
+{
+	struct xhci_container_ctx *ctx;
+
+	ctx = kzalloc(sizeof(*ctx), flags);
+	if (!ctx)
+		return NULL;
+
+	/* xhci 7.6.9, all three contexts; info, ep-out and ep-in. Each 64 bytes*/
+	ctx->size = 3 * DBC_CONTEXT_SIZE;
+	ctx->bytes = dma_alloc_coherent(dev, ctx->size, &ctx->dma, flags);
+	if (!ctx->bytes) {
+		kfree(ctx);
+		return NULL;
+	}
+	return ctx;
+}
+
+static struct xhci_ring *
+xhci_dbc_ring_alloc(struct device *dev, enum xhci_ring_type type, gfp_t flags)
+{
+	struct xhci_ring *ring;
+	struct xhci_segment *seg;
+	dma_addr_t dma;
+
+	ring = kzalloc(sizeof(*ring), flags);
+	if (!ring)
+		return NULL;
+
+	ring->num_segs = 1;
+	ring->type = type;
+
+	seg = kzalloc(sizeof(*seg), flags);
+	if (!seg)
+		goto seg_fail;
+
+	ring->first_seg = seg;
+	ring->last_seg = seg;
+	seg->next = seg;
+
+	seg->trbs = dma_alloc_coherent(dev, TRB_SEGMENT_SIZE, &dma, flags);
+	if (!seg->trbs)
+		goto dma_fail;
+
+	seg->dma = dma;
+
+	/* Only event ring does not use link TRB */
+	if (type != TYPE_EVENT) {
+		union xhci_trb *trb = &seg->trbs[TRBS_PER_SEGMENT - 1];
+
+		trb->link.segment_ptr = cpu_to_le64(dma);
+		trb->link.control = cpu_to_le32(LINK_TOGGLE | TRB_TYPE(TRB_LINK));
+	}
+	INIT_LIST_HEAD(&ring->td_list);
+	xhci_initialize_ring_info(ring, 1);
+	return ring;
+dma_fail:
+	kfree(seg);
+seg_fail:
+	kfree(ring);
+	return NULL;
+}
+
+static int xhci_dbc_mem_init(struct xhci_dbc *dbc, gfp_t flags)
+{
+	int			ret;
+	dma_addr_t		deq;
+	u32			string_length;
+	struct device		*dev = dbc->dev;
+
+	/* Allocate various rings for events and transfers: */
+	dbc->ring_evt = xhci_dbc_ring_alloc(dev, TYPE_EVENT, flags);
+	if (!dbc->ring_evt)
+		goto evt_fail;
+
+	dbc->ring_in = xhci_dbc_ring_alloc(dev, TYPE_BULK, flags);
+	if (!dbc->ring_in)
+		goto in_fail;
+
+	dbc->ring_out = xhci_dbc_ring_alloc(dev, TYPE_BULK, flags);
+	if (!dbc->ring_out)
+		goto out_fail;
+
+	/* Allocate and populate ERST: */
+	ret = dbc_erst_alloc(dev, dbc->ring_evt, &dbc->erst, flags);
+	if (ret)
+		goto erst_fail;
+
+	/* Allocate context data structure: */
+	dbc->ctx = dbc_alloc_ctx(dev, flags); /* was sysdev, and is still */
+	if (!dbc->ctx)
+		goto ctx_fail;
+
+	/* Allocate the string table: */
+	dbc->string_size = sizeof(struct dbc_str_descs);
+	dbc->string = dma_alloc_coherent(dev, dbc->string_size,
+					 &dbc->string_dma, flags);
+	if (!dbc->string)
+		goto string_fail;
+
+	/* Setup ERST register: */
+	writel(dbc->erst.erst_size, &dbc->regs->ersts);
+
+	lo_hi_writeq(dbc->erst.erst_dma_addr, &dbc->regs->erstba);
+	deq = xhci_trb_virt_to_dma(dbc->ring_evt->deq_seg,
+				   dbc->ring_evt->dequeue);
+	lo_hi_writeq(deq, &dbc->regs->erdp);
+
+	/* Setup strings and contexts: */
+	string_length = xhci_dbc_populate_strings(dbc->string);
+	xhci_dbc_init_contexts(dbc, string_length);
+
+	xhci_dbc_eps_init(dbc);
+	dbc->state = DS_INITIALIZED;
+
+	return 0;
+
+string_fail:
+	dbc_free_ctx(dev, dbc->ctx);
+	dbc->ctx = NULL;
+ctx_fail:
+	dbc_erst_free(dev, &dbc->erst);
+erst_fail:
+	dbc_ring_free(dev, dbc->ring_out);
+	dbc->ring_out = NULL;
+out_fail:
+	dbc_ring_free(dev, dbc->ring_in);
+	dbc->ring_in = NULL;
+in_fail:
+	dbc_ring_free(dev, dbc->ring_evt);
+	dbc->ring_evt = NULL;
+evt_fail:
+	return -ENOMEM;
+}
+
+static void xhci_dbc_mem_cleanup(struct xhci_dbc *dbc)
+{
+	if (!dbc)
+		return;
+
+	xhci_dbc_eps_exit(dbc);
+
+	if (dbc->string) {
+		dma_free_coherent(dbc->dev, dbc->string_size,
+				  dbc->string, dbc->string_dma);
+		dbc->string = NULL;
+	}
+
+	dbc_free_ctx(dbc->dev, dbc->ctx);
+	dbc->ctx = NULL;
+
+	dbc_erst_free(dbc->dev, &dbc->erst);
+	dbc_ring_free(dbc->dev, dbc->ring_out);
+	dbc_ring_free(dbc->dev, dbc->ring_in);
+	dbc_ring_free(dbc->dev, dbc->ring_evt);
+	dbc->ring_in = NULL;
+	dbc->ring_out = NULL;
+	dbc->ring_evt = NULL;
+}
+
+static int xhci_do_dbc_start(struct xhci_dbc *dbc)
+{
+	int			ret;
+	u32			ctrl;
+
+	if (dbc->state != DS_DISABLED)
+		return -EINVAL;
+
+	writel(0, &dbc->regs->control);
+	ret = xhci_handshake(&dbc->regs->control,
+			     DBC_CTRL_DBC_ENABLE,
+			     0, 1000);
+	if (ret)
+		return ret;
+
+	ret = xhci_dbc_mem_init(dbc, GFP_ATOMIC);
+	if (ret)
+		return ret;
+
+	ctrl = readl(&dbc->regs->control);
+	writel(ctrl | DBC_CTRL_DBC_ENABLE | DBC_CTRL_PORT_ENABLE,
+	       &dbc->regs->control);
+	ret = xhci_handshake(&dbc->regs->control,
+			     DBC_CTRL_DBC_ENABLE,
+			     DBC_CTRL_DBC_ENABLE, 1000);
+	if (ret)
+		return ret;
+
+	dbc->state = DS_ENABLED;
+
+	return 0;
+}
+
+static int xhci_do_dbc_stop(struct xhci_dbc *dbc)
+{
+	if (dbc->state == DS_DISABLED)
+		return -1;
+
+	writel(0, &dbc->regs->control);
+	dbc->state = DS_DISABLED;
+
+	return 0;
+}
+
+static int xhci_dbc_start(struct xhci_dbc *dbc)
+{
+	int			ret;
+	unsigned long		flags;
+
+	WARN_ON(!dbc);
+
+	pm_runtime_get_sync(dbc->dev); /* note this was self.controller */
+
+	spin_lock_irqsave(&dbc->lock, flags);
+	ret = xhci_do_dbc_start(dbc);
+	spin_unlock_irqrestore(&dbc->lock, flags);
+
+	if (ret) {
+		pm_runtime_put(dbc->dev); /* note this was self.controller */
+		return ret;
+	}
+
+	return mod_delayed_work(system_wq, &dbc->event_work, 1);
+}
+
+static void xhci_dbc_stop(struct xhci_dbc *dbc)
+{
+	int ret;
+	unsigned long		flags;
+
+	WARN_ON(!dbc);
+
+	switch (dbc->state) {
+	case DS_DISABLED:
+		return;
+	case DS_CONFIGURED:
+	case DS_STALLED:
+		if (dbc->driver->disconnect)
+			dbc->driver->disconnect(dbc);
+		break;
+	default:
+		break;
+	}
+
+	cancel_delayed_work_sync(&dbc->event_work);
+
+	spin_lock_irqsave(&dbc->lock, flags);
+	ret = xhci_do_dbc_stop(dbc);
+	spin_unlock_irqrestore(&dbc->lock, flags);
+
+	if (!ret) {
+		xhci_dbc_mem_cleanup(dbc);
+		pm_runtime_put_sync(dbc->dev); /* note, was self.controller */
+	}
+}
+
+static void
+dbc_handle_port_status(struct xhci_dbc *dbc, union xhci_trb *event)
+{
+	u32			portsc;
+
+	portsc = readl(&dbc->regs->portsc);
+	if (portsc & DBC_PORTSC_CONN_CHANGE)
+		dev_info(dbc->dev, "DbC port connect change\n");
+
+	if (portsc & DBC_PORTSC_RESET_CHANGE)
+		dev_info(dbc->dev, "DbC port reset change\n");
+
+	if (portsc & DBC_PORTSC_LINK_CHANGE)
+		dev_info(dbc->dev, "DbC port link status change\n");
+
+	if (portsc & DBC_PORTSC_CONFIG_CHANGE)
+		dev_info(dbc->dev, "DbC config error change\n");
+
+	/* Port reset change bit will be cleared in other place: */
+	writel(portsc & ~DBC_PORTSC_RESET_CHANGE, &dbc->regs->portsc);
+}
+
+static void dbc_handle_xfer_event(struct xhci_dbc *dbc, union xhci_trb *event)
+{
+	struct dbc_ep		*dep;
+	struct xhci_ring	*ring;
+	int			ep_id;
+	int			status;
+	u32			comp_code;
+	size_t			remain_length;
+	struct dbc_request	*req = NULL, *r;
+
+	comp_code	= GET_COMP_CODE(le32_to_cpu(event->generic.field[2]));
+	remain_length	= EVENT_TRB_LEN(le32_to_cpu(event->generic.field[2]));
+	ep_id		= TRB_TO_EP_ID(le32_to_cpu(event->generic.field[3]));
+	dep		= (ep_id == EPID_OUT) ?
+				get_out_ep(dbc) : get_in_ep(dbc);
+	ring		= dep->ring;
+
+	switch (comp_code) {
+	case COMP_SUCCESS:
+		remain_length = 0;
+		fallthrough;
+	case COMP_SHORT_PACKET:
+		status = 0;
+		break;
+	case COMP_TRB_ERROR:
+	case COMP_BABBLE_DETECTED_ERROR:
+	case COMP_USB_TRANSACTION_ERROR:
+	case COMP_STALL_ERROR:
+		dev_warn(dbc->dev, "tx error %d detected\n", comp_code);
+		status = -comp_code;
+		break;
+	default:
+		dev_err(dbc->dev, "unknown tx error %d\n", comp_code);
+		status = -comp_code;
+		break;
+	}
+
+	/* Match the pending request: */
+	list_for_each_entry(r, &dep->list_pending, list_pending) {
+		if (r->trb_dma == event->trans_event.buffer) {
+			req = r;
+			break;
+		}
+	}
+
+	if (!req) {
+		dev_warn(dbc->dev, "no matched request\n");
+		return;
+	}
+
+	trace_xhci_dbc_handle_transfer(ring, &req->trb->generic);
+
+	ring->num_trbs_free++;
+	req->actual = req->length - remain_length;
+	xhci_dbc_giveback(req, status);
+}
+
+static void inc_evt_deq(struct xhci_ring *ring)
+{
+	/* If on the last TRB of the segment go back to the beginning */
+	if (ring->dequeue == &ring->deq_seg->trbs[TRBS_PER_SEGMENT - 1]) {
+		ring->cycle_state ^= 1;
+		ring->dequeue = ring->deq_seg->trbs;
+		return;
+	}
+	ring->dequeue++;
+}
+
+static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc)
+{
+	dma_addr_t		deq;
+	struct dbc_ep		*dep;
+	union xhci_trb		*evt;
+	u32			ctrl, portsc;
+	bool			update_erdp = false;
+
+	/* DbC state machine: */
+	switch (dbc->state) {
+	case DS_DISABLED:
+	case DS_INITIALIZED:
+
+		return EVT_ERR;
+	case DS_ENABLED:
+		portsc = readl(&dbc->regs->portsc);
+		if (portsc & DBC_PORTSC_CONN_STATUS) {
+			dbc->state = DS_CONNECTED;
+			dev_info(dbc->dev, "DbC connected\n");
+		}
+
+		return EVT_DONE;
+	case DS_CONNECTED:
+		ctrl = readl(&dbc->regs->control);
+		if (ctrl & DBC_CTRL_DBC_RUN) {
+			dbc->state = DS_CONFIGURED;
+			dev_info(dbc->dev, "DbC configured\n");
+			portsc = readl(&dbc->regs->portsc);
+			writel(portsc, &dbc->regs->portsc);
+			return EVT_GSER;
+		}
+
+		return EVT_DONE;
+	case DS_CONFIGURED:
+		/* Handle cable unplug event: */
+		portsc = readl(&dbc->regs->portsc);
+		if (!(portsc & DBC_PORTSC_PORT_ENABLED) &&
+		    !(portsc & DBC_PORTSC_CONN_STATUS)) {
+			dev_info(dbc->dev, "DbC cable unplugged\n");
+			dbc->state = DS_ENABLED;
+			xhci_dbc_flush_requests(dbc);
+
+			return EVT_DISC;
+		}
+
+		/* Handle debug port reset event: */
+		if (portsc & DBC_PORTSC_RESET_CHANGE) {
+			dev_info(dbc->dev, "DbC port reset\n");
+			writel(portsc, &dbc->regs->portsc);
+			dbc->state = DS_ENABLED;
+			xhci_dbc_flush_requests(dbc);
+
+			return EVT_DISC;
+		}
+
+		/* Handle endpoint stall event: */
+		ctrl = readl(&dbc->regs->control);
+		if ((ctrl & DBC_CTRL_HALT_IN_TR) ||
+		    (ctrl & DBC_CTRL_HALT_OUT_TR)) {
+			dev_info(dbc->dev, "DbC Endpoint stall\n");
+			dbc->state = DS_STALLED;
+
+			if (ctrl & DBC_CTRL_HALT_IN_TR) {
+				dep = get_in_ep(dbc);
+				xhci_dbc_flush_endpoint_requests(dep);
+			}
+
+			if (ctrl & DBC_CTRL_HALT_OUT_TR) {
+				dep = get_out_ep(dbc);
+				xhci_dbc_flush_endpoint_requests(dep);
+			}
+
+			return EVT_DONE;
+		}
+
+		/* Clear DbC run change bit: */
+		if (ctrl & DBC_CTRL_DBC_RUN_CHANGE) {
+			writel(ctrl, &dbc->regs->control);
+			ctrl = readl(&dbc->regs->control);
+		}
+
+		break;
+	case DS_STALLED:
+		ctrl = readl(&dbc->regs->control);
+		if (!(ctrl & DBC_CTRL_HALT_IN_TR) &&
+		    !(ctrl & DBC_CTRL_HALT_OUT_TR) &&
+		    (ctrl & DBC_CTRL_DBC_RUN)) {
+			dbc->state = DS_CONFIGURED;
+			break;
+		}
+
+		return EVT_DONE;
+	default:
+		dev_err(dbc->dev, "Unknown DbC state %d\n", dbc->state);
+		break;
+	}
+
+	/* Handle the events in the event ring: */
+	evt = dbc->ring_evt->dequeue;
+	while ((le32_to_cpu(evt->event_cmd.flags) & TRB_CYCLE) ==
+			dbc->ring_evt->cycle_state) {
+		/*
+		 * Add a barrier between reading the cycle flag and any
+		 * reads of the event's flags/data below:
+		 */
+		rmb();
+
+		trace_xhci_dbc_handle_event(dbc->ring_evt, &evt->generic);
+
+		switch (le32_to_cpu(evt->event_cmd.flags) & TRB_TYPE_BITMASK) {
+		case TRB_TYPE(TRB_PORT_STATUS):
+			dbc_handle_port_status(dbc, evt);
+			break;
+		case TRB_TYPE(TRB_TRANSFER):
+			dbc_handle_xfer_event(dbc, evt);
+			break;
+		default:
+			break;
+		}
+
+		inc_evt_deq(dbc->ring_evt);
+
+		evt = dbc->ring_evt->dequeue;
+		update_erdp = true;
+	}
+
+	/* Update event ring dequeue pointer: */
+	if (update_erdp) {
+		deq = xhci_trb_virt_to_dma(dbc->ring_evt->deq_seg,
+					   dbc->ring_evt->dequeue);
+		lo_hi_writeq(deq, &dbc->regs->erdp);
+	}
+
+	return EVT_DONE;
+}
+
+static void xhci_dbc_handle_events(struct work_struct *work)
+{
+	enum evtreturn		evtr;
+	struct xhci_dbc		*dbc;
+	unsigned long		flags;
+
+	dbc = container_of(to_delayed_work(work), struct xhci_dbc, event_work);
+
+	spin_lock_irqsave(&dbc->lock, flags);
+	evtr = xhci_dbc_do_handle_events(dbc);
+	spin_unlock_irqrestore(&dbc->lock, flags);
+
+	switch (evtr) {
+	case EVT_GSER:
+		if (dbc->driver->configure)
+			dbc->driver->configure(dbc);
+		break;
+	case EVT_DISC:
+		if (dbc->driver->disconnect)
+			dbc->driver->disconnect(dbc);
+		break;
+	case EVT_DONE:
+		break;
+	default:
+		dev_info(dbc->dev, "stop handling dbc events\n");
+		return;
+	}
+
+	mod_delayed_work(system_wq, &dbc->event_work, 1);
+}
+
+static ssize_t dbc_show(struct device *dev,
+			struct device_attribute *attr,
+			char *buf)
+{
+	const char		*p;
+	struct xhci_dbc		*dbc;
+	struct xhci_hcd		*xhci;
+
+	xhci = hcd_to_xhci(dev_get_drvdata(dev));
+	dbc = xhci->dbc;
+
+	switch (dbc->state) {
+	case DS_DISABLED:
+		p = "disabled";
+		break;
+	case DS_INITIALIZED:
+		p = "initialized";
+		break;
+	case DS_ENABLED:
+		p = "enabled";
+		break;
+	case DS_CONNECTED:
+		p = "connected";
+		break;
+	case DS_CONFIGURED:
+		p = "configured";
+		break;
+	case DS_STALLED:
+		p = "stalled";
+		break;
+	default:
+		p = "unknown";
+	}
+
+	return sprintf(buf, "%s\n", p);
+}
+
+static ssize_t dbc_store(struct device *dev,
+			 struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	struct xhci_hcd		*xhci;
+	struct xhci_dbc		*dbc;
+
+	xhci = hcd_to_xhci(dev_get_drvdata(dev));
+	dbc = xhci->dbc;
+
+	if (!strncmp(buf, "enable", 6))
+		xhci_dbc_start(dbc);
+	else if (!strncmp(buf, "disable", 7))
+		xhci_dbc_stop(dbc);
+	else
+		return -EINVAL;
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(dbc);
+
+struct xhci_dbc *
+xhci_alloc_dbc(struct device *dev, void __iomem *base, const struct dbc_driver *driver)
+{
+	struct xhci_dbc		*dbc;
+	int			ret;
+
+	dbc = kzalloc(sizeof(*dbc), GFP_KERNEL);
+	if (!dbc)
+		return NULL;
+
+	dbc->regs = base;
+	dbc->dev = dev;
+	dbc->driver = driver;
+
+	if (readl(&dbc->regs->control) & DBC_CTRL_DBC_ENABLE)
+		goto err;
+
+	INIT_DELAYED_WORK(&dbc->event_work, xhci_dbc_handle_events);
+	spin_lock_init(&dbc->lock);
+
+	ret = device_create_file(dev, &dev_attr_dbc);
+	if (ret)
+		goto err;
+
+	return dbc;
+err:
+	kfree(dbc);
+	return NULL;
+}
+
+/* undo what xhci_alloc_dbc() did */
+void xhci_dbc_remove(struct xhci_dbc *dbc)
+{
+	if (!dbc)
+		return;
+	/* stop hw, stop wq and call dbc->ops->stop() */
+	xhci_dbc_stop(dbc);
+
+	/* remove sysfs files */
+	device_remove_file(dbc->dev, &dev_attr_dbc);
+
+	kfree(dbc);
+}
+
+
+int xhci_create_dbc_dev(struct xhci_hcd *xhci)
+{
+	struct device		*dev;
+	void __iomem		*base;
+	int			ret;
+	int			dbc_cap_offs;
+
+	/* create all parameters needed resembling a dbc device */
+	dev = xhci_to_hcd(xhci)->self.controller;
+	base = &xhci->cap_regs->hc_capbase;
+
+	dbc_cap_offs = xhci_find_next_ext_cap(base, 0, XHCI_EXT_CAPS_DEBUG);
+	if (!dbc_cap_offs)
+		return -ENODEV;
+
+	/* already allocated and in use */
+	if (xhci->dbc)
+		return -EBUSY;
+
+	ret = xhci_dbc_tty_probe(dev, base + dbc_cap_offs, xhci);
+
+	return ret;
+}
+
+void xhci_remove_dbc_dev(struct xhci_hcd *xhci)
+{
+	unsigned long		flags;
+
+	if (!xhci->dbc)
+		return;
+
+	xhci_dbc_tty_remove(xhci->dbc);
+	spin_lock_irqsave(&xhci->lock, flags);
+	xhci->dbc = NULL;
+	spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
+#ifdef CONFIG_PM
+int xhci_dbc_suspend(struct xhci_hcd *xhci)
+{
+	struct xhci_dbc		*dbc = xhci->dbc;
+
+	if (!dbc)
+		return 0;
+
+	if (dbc->state == DS_CONFIGURED)
+		dbc->resume_required = 1;
+
+	xhci_dbc_stop(dbc);
+
+	return 0;
+}
+
+int xhci_dbc_resume(struct xhci_hcd *xhci)
+{
+	int			ret = 0;
+	struct xhci_dbc		*dbc = xhci->dbc;
+
+	if (!dbc)
+		return 0;
+
+	if (dbc->resume_required) {
+		dbc->resume_required = 0;
+		xhci_dbc_start(dbc);
+	}
+
+	return ret;
+}
+#endif /* CONFIG_PM */
+
+int xhci_dbc_init(void)
+{
+	return dbc_tty_init();
+}
+
+void xhci_dbc_exit(void)
+{
+	dbc_tty_exit();
+}
diff --git a/drivers/usb/host/xhci-dbgcap.h b/drivers/usb/host/xhci-dbgcap.h
new file mode 100644
index 000000000..ca04192fd
--- /dev/null
+++ b/drivers/usb/host/xhci-dbgcap.h
@@ -0,0 +1,244 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/**
+ * xhci-dbgcap.h - xHCI debug capability support
+ *
+ * Copyright (C) 2017 Intel Corporation
+ *
+ * Author: Lu Baolu <baolu.lu@linux.intel.com>
+ */
+#ifndef __LINUX_XHCI_DBGCAP_H
+#define __LINUX_XHCI_DBGCAP_H
+
+#include <linux/tty.h>
+#include <linux/kfifo.h>
+
+struct dbc_regs {
+	__le32	capability;
+	__le32	doorbell;
+	__le32	ersts;		/* Event Ring Segment Table Size*/
+	__le32	__reserved_0;	/* 0c~0f reserved bits */
+	__le64	erstba;		/* Event Ring Segment Table Base Address */
+	__le64	erdp;		/* Event Ring Dequeue Pointer */
+	__le32	control;
+	__le32	status;
+	__le32	portsc;		/* Port status and control */
+	__le32	__reserved_1;	/* 2b~28 reserved bits */
+	__le64	dccp;		/* Debug Capability Context Pointer */
+	__le32	devinfo1;	/* Device Descriptor Info Register 1 */
+	__le32	devinfo2;	/* Device Descriptor Info Register 2 */
+};
+
+struct dbc_info_context {
+	__le64	string0;
+	__le64	manufacturer;
+	__le64	product;
+	__le64	serial;
+	__le32	length;
+	__le32	__reserved_0[7];
+};
+
+#define DBC_CTRL_DBC_RUN		BIT(0)
+#define DBC_CTRL_PORT_ENABLE		BIT(1)
+#define DBC_CTRL_HALT_OUT_TR		BIT(2)
+#define DBC_CTRL_HALT_IN_TR		BIT(3)
+#define DBC_CTRL_DBC_RUN_CHANGE		BIT(4)
+#define DBC_CTRL_DBC_ENABLE		BIT(31)
+#define DBC_CTRL_MAXBURST(p)		(((p) >> 16) & 0xff)
+#define DBC_DOOR_BELL_TARGET(p)		(((p) & 0xff) << 8)
+
+#define DBC_MAX_PACKET			1024
+#define DBC_MAX_STRING_LENGTH		64
+#define DBC_STRING_MANUFACTURER		"Linux Foundation"
+#define DBC_STRING_PRODUCT		"Linux USB Debug Target"
+#define DBC_STRING_SERIAL		"0001"
+#define	DBC_CONTEXT_SIZE		64
+
+/*
+ * Port status:
+ */
+#define DBC_PORTSC_CONN_STATUS		BIT(0)
+#define DBC_PORTSC_PORT_ENABLED		BIT(1)
+#define DBC_PORTSC_CONN_CHANGE		BIT(17)
+#define DBC_PORTSC_RESET_CHANGE		BIT(21)
+#define DBC_PORTSC_LINK_CHANGE		BIT(22)
+#define DBC_PORTSC_CONFIG_CHANGE	BIT(23)
+
+struct dbc_str_descs {
+	char	string0[DBC_MAX_STRING_LENGTH];
+	char	manufacturer[DBC_MAX_STRING_LENGTH];
+	char	product[DBC_MAX_STRING_LENGTH];
+	char	serial[DBC_MAX_STRING_LENGTH];
+};
+
+#define DBC_PROTOCOL			1	/* GNU Remote Debug Command */
+#define DBC_VENDOR_ID			0x1d6b	/* Linux Foundation 0x1d6b */
+#define DBC_PRODUCT_ID			0x0010	/* device 0010 */
+#define DBC_DEVICE_REV			0x0010	/* 0.10 */
+
+enum dbc_state {
+	DS_DISABLED = 0,
+	DS_INITIALIZED,
+	DS_ENABLED,
+	DS_CONNECTED,
+	DS_CONFIGURED,
+	DS_STALLED,
+};
+
+struct dbc_ep {
+	struct xhci_dbc			*dbc;
+	struct list_head		list_pending;
+	struct xhci_ring		*ring;
+	unsigned int			direction:1;
+};
+
+#define DBC_QUEUE_SIZE			16
+#define DBC_WRITE_BUF_SIZE		8192
+
+/*
+ * Private structure for DbC hardware state:
+ */
+struct dbc_port {
+	struct tty_port			port;
+	spinlock_t			port_lock;	/* port access */
+	int				minor;
+
+	struct list_head		read_pool;
+	struct list_head		read_queue;
+	unsigned int			n_read;
+	struct tasklet_struct		push;
+
+	struct list_head		write_pool;
+	struct kfifo			write_fifo;
+
+	bool				registered;
+};
+
+struct dbc_driver {
+	int (*configure)(struct xhci_dbc *dbc);
+	void (*disconnect)(struct xhci_dbc *dbc);
+};
+
+struct xhci_dbc {
+	spinlock_t			lock;		/* device access */
+	struct device			*dev;
+	struct xhci_hcd			*xhci;
+	struct dbc_regs __iomem		*regs;
+	struct xhci_ring		*ring_evt;
+	struct xhci_ring		*ring_in;
+	struct xhci_ring		*ring_out;
+	struct xhci_erst		erst;
+	struct xhci_container_ctx	*ctx;
+
+	struct dbc_str_descs		*string;
+	dma_addr_t			string_dma;
+	size_t				string_size;
+
+	enum dbc_state			state;
+	struct delayed_work		event_work;
+	unsigned			resume_required:1;
+	struct dbc_ep			eps[2];
+
+	const struct dbc_driver		*driver;
+	void				*priv;
+};
+
+struct dbc_request {
+	void				*buf;
+	unsigned int			length;
+	dma_addr_t			dma;
+	void				(*complete)(struct xhci_dbc *dbc,
+						    struct dbc_request *req);
+	struct list_head		list_pool;
+	int				status;
+	unsigned int			actual;
+
+	struct xhci_dbc			*dbc;
+	struct list_head		list_pending;
+	dma_addr_t			trb_dma;
+	union xhci_trb			*trb;
+	unsigned			direction:1;
+};
+
+#define dbc_bulkout_ctx(d)		\
+	((struct xhci_ep_ctx *)((d)->ctx->bytes + DBC_CONTEXT_SIZE))
+#define dbc_bulkin_ctx(d)		\
+	((struct xhci_ep_ctx *)((d)->ctx->bytes + DBC_CONTEXT_SIZE * 2))
+#define dbc_bulkout_enq(d)		\
+	xhci_trb_virt_to_dma((d)->ring_out->enq_seg, (d)->ring_out->enqueue)
+#define dbc_bulkin_enq(d)		\
+	xhci_trb_virt_to_dma((d)->ring_in->enq_seg, (d)->ring_in->enqueue)
+#define dbc_epctx_info2(t, p, b)	\
+	cpu_to_le32(EP_TYPE(t) | MAX_PACKET(p) | MAX_BURST(b))
+#define dbc_ep_dma_direction(d)		\
+	((d)->direction ? DMA_FROM_DEVICE : DMA_TO_DEVICE)
+
+#define BULK_OUT			0
+#define BULK_IN				1
+#define EPID_OUT			2
+#define EPID_IN				3
+
+enum evtreturn {
+	EVT_ERR	= -1,
+	EVT_DONE,
+	EVT_GSER,
+	EVT_DISC,
+};
+
+static inline struct dbc_ep *get_in_ep(struct xhci_dbc *dbc)
+{
+	return &dbc->eps[BULK_IN];
+}
+
+static inline struct dbc_ep *get_out_ep(struct xhci_dbc *dbc)
+{
+	return &dbc->eps[BULK_OUT];
+}
+
+#ifdef CONFIG_USB_XHCI_DBGCAP
+int xhci_create_dbc_dev(struct xhci_hcd *xhci);
+void xhci_remove_dbc_dev(struct xhci_hcd *xhci);
+int xhci_dbc_init(void);
+void xhci_dbc_exit(void);
+int dbc_tty_init(void);
+void dbc_tty_exit(void);
+int xhci_dbc_tty_probe(struct device *dev, void __iomem *res, struct xhci_hcd *xhci);
+void xhci_dbc_tty_remove(struct xhci_dbc *dbc);
+struct xhci_dbc *xhci_alloc_dbc(struct device *dev, void __iomem *res,
+				 const struct dbc_driver *driver);
+void xhci_dbc_remove(struct xhci_dbc *dbc);
+struct dbc_request *dbc_alloc_request(struct xhci_dbc *dbc,
+				      unsigned int direction,
+				      gfp_t flags);
+void dbc_free_request(struct dbc_request *req);
+int dbc_ep_queue(struct dbc_request *req);
+#ifdef CONFIG_PM
+int xhci_dbc_suspend(struct xhci_hcd *xhci);
+int xhci_dbc_resume(struct xhci_hcd *xhci);
+#endif /* CONFIG_PM */
+#else
+static inline int xhci_create_dbc_dev(struct xhci_hcd *xhci)
+{
+	return 0;
+}
+
+static inline void xhci_remove_dbc_dev(struct xhci_hcd *xhci)
+{
+}
+static inline int xhci_dbc_init(void)
+{
+	return 0;
+}
+static inline void xhci_dbc_exit(void)
+{
+}
+static inline int xhci_dbc_suspend(struct xhci_hcd *xhci)
+{
+	return 0;
+}
+
+static inline int xhci_dbc_resume(struct xhci_hcd *xhci)
+{
+	return 0;
+}
+#endif /* CONFIG_USB_XHCI_DBGCAP */
+#endif /* __LINUX_XHCI_DBGCAP_H */
diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c
new file mode 100644
index 000000000..d3acc0829
--- /dev/null
+++ b/drivers/usb/host/xhci-dbgtty.c
@@ -0,0 +1,582 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xhci-dbgtty.c - tty glue for xHCI debug capability
+ *
+ * Copyright (C) 2017 Intel Corporation
+ *
+ * Author: Lu Baolu <baolu.lu@linux.intel.com>
+ */
+
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/idr.h>
+
+#include "xhci.h"
+#include "xhci-dbgcap.h"
+
+static struct tty_driver *dbc_tty_driver;
+static struct idr dbc_tty_minors;
+static DEFINE_MUTEX(dbc_tty_minors_lock);
+
+static inline struct dbc_port *dbc_to_port(struct xhci_dbc *dbc)
+{
+	return dbc->priv;
+}
+
+static unsigned int
+dbc_send_packet(struct dbc_port *port, char *packet, unsigned int size)
+{
+	unsigned int		len;
+
+	len = kfifo_len(&port->write_fifo);
+	if (len < size)
+		size = len;
+	if (size != 0)
+		size = kfifo_out(&port->write_fifo, packet, size);
+	return size;
+}
+
+static int dbc_start_tx(struct dbc_port *port)
+	__releases(&port->port_lock)
+	__acquires(&port->port_lock)
+{
+	int			len;
+	struct dbc_request	*req;
+	int			status = 0;
+	bool			do_tty_wake = false;
+	struct list_head	*pool = &port->write_pool;
+
+	while (!list_empty(pool)) {
+		req = list_entry(pool->next, struct dbc_request, list_pool);
+		len = dbc_send_packet(port, req->buf, DBC_MAX_PACKET);
+		if (len == 0)
+			break;
+		do_tty_wake = true;
+
+		req->length = len;
+		list_del(&req->list_pool);
+
+		spin_unlock(&port->port_lock);
+		status = dbc_ep_queue(req);
+		spin_lock(&port->port_lock);
+
+		if (status) {
+			list_add(&req->list_pool, pool);
+			break;
+		}
+	}
+
+	if (do_tty_wake && port->port.tty)
+		tty_wakeup(port->port.tty);
+
+	return status;
+}
+
+static void dbc_start_rx(struct dbc_port *port)
+	__releases(&port->port_lock)
+	__acquires(&port->port_lock)
+{
+	struct dbc_request	*req;
+	int			status;
+	struct list_head	*pool = &port->read_pool;
+
+	while (!list_empty(pool)) {
+		if (!port->port.tty)
+			break;
+
+		req = list_entry(pool->next, struct dbc_request, list_pool);
+		list_del(&req->list_pool);
+		req->length = DBC_MAX_PACKET;
+
+		spin_unlock(&port->port_lock);
+		status = dbc_ep_queue(req);
+		spin_lock(&port->port_lock);
+
+		if (status) {
+			list_add(&req->list_pool, pool);
+			break;
+		}
+	}
+}
+
+static void
+dbc_read_complete(struct xhci_dbc *dbc, struct dbc_request *req)
+{
+	unsigned long		flags;
+	struct dbc_port		*port = dbc_to_port(dbc);
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	list_add_tail(&req->list_pool, &port->read_queue);
+	tasklet_schedule(&port->push);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+}
+
+static void dbc_write_complete(struct xhci_dbc *dbc, struct dbc_request *req)
+{
+	unsigned long		flags;
+	struct dbc_port		*port = dbc_to_port(dbc);
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	list_add(&req->list_pool, &port->write_pool);
+	switch (req->status) {
+	case 0:
+		dbc_start_tx(port);
+		break;
+	case -ESHUTDOWN:
+		break;
+	default:
+		dev_warn(dbc->dev, "unexpected write complete status %d\n",
+			  req->status);
+		break;
+	}
+	spin_unlock_irqrestore(&port->port_lock, flags);
+}
+
+static void xhci_dbc_free_req(struct dbc_request *req)
+{
+	kfree(req->buf);
+	dbc_free_request(req);
+}
+
+static int
+xhci_dbc_alloc_requests(struct xhci_dbc *dbc, unsigned int direction,
+			struct list_head *head,
+			void (*fn)(struct xhci_dbc *, struct dbc_request *))
+{
+	int			i;
+	struct dbc_request	*req;
+
+	for (i = 0; i < DBC_QUEUE_SIZE; i++) {
+		req = dbc_alloc_request(dbc, direction, GFP_KERNEL);
+		if (!req)
+			break;
+
+		req->length = DBC_MAX_PACKET;
+		req->buf = kmalloc(req->length, GFP_KERNEL);
+		if (!req->buf) {
+			dbc_free_request(req);
+			break;
+		}
+
+		req->complete = fn;
+		list_add_tail(&req->list_pool, head);
+	}
+
+	return list_empty(head) ? -ENOMEM : 0;
+}
+
+static void
+xhci_dbc_free_requests(struct list_head *head)
+{
+	struct dbc_request	*req;
+
+	while (!list_empty(head)) {
+		req = list_entry(head->next, struct dbc_request, list_pool);
+		list_del(&req->list_pool);
+		xhci_dbc_free_req(req);
+	}
+}
+
+static int dbc_tty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+	struct dbc_port		*port;
+
+	mutex_lock(&dbc_tty_minors_lock);
+	port = idr_find(&dbc_tty_minors, tty->index);
+	mutex_unlock(&dbc_tty_minors_lock);
+
+	if (!port)
+		return -ENXIO;
+
+	tty->driver_data = port;
+
+	return tty_port_install(&port->port, driver, tty);
+}
+
+static int dbc_tty_open(struct tty_struct *tty, struct file *file)
+{
+	struct dbc_port		*port = tty->driver_data;
+
+	return tty_port_open(&port->port, tty, file);
+}
+
+static void dbc_tty_close(struct tty_struct *tty, struct file *file)
+{
+	struct dbc_port		*port = tty->driver_data;
+
+	tty_port_close(&port->port, tty, file);
+}
+
+static int dbc_tty_write(struct tty_struct *tty,
+			 const unsigned char *buf,
+			 int count)
+{
+	struct dbc_port		*port = tty->driver_data;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	if (count)
+		count = kfifo_in(&port->write_fifo, buf, count);
+	dbc_start_tx(port);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+
+	return count;
+}
+
+static int dbc_tty_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	struct dbc_port		*port = tty->driver_data;
+	unsigned long		flags;
+	int			status;
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	status = kfifo_put(&port->write_fifo, ch);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+
+	return status;
+}
+
+static void dbc_tty_flush_chars(struct tty_struct *tty)
+{
+	struct dbc_port		*port = tty->driver_data;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	dbc_start_tx(port);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+}
+
+static unsigned int dbc_tty_write_room(struct tty_struct *tty)
+{
+	struct dbc_port		*port = tty->driver_data;
+	unsigned long		flags;
+	unsigned int		room;
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	room = kfifo_avail(&port->write_fifo);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+
+	return room;
+}
+
+static unsigned int dbc_tty_chars_in_buffer(struct tty_struct *tty)
+{
+	struct dbc_port		*port = tty->driver_data;
+	unsigned long		flags;
+	unsigned int		chars;
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	chars = kfifo_len(&port->write_fifo);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+
+	return chars;
+}
+
+static void dbc_tty_unthrottle(struct tty_struct *tty)
+{
+	struct dbc_port		*port = tty->driver_data;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	tasklet_schedule(&port->push);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+}
+
+static const struct tty_operations dbc_tty_ops = {
+	.install		= dbc_tty_install,
+	.open			= dbc_tty_open,
+	.close			= dbc_tty_close,
+	.write			= dbc_tty_write,
+	.put_char		= dbc_tty_put_char,
+	.flush_chars		= dbc_tty_flush_chars,
+	.write_room		= dbc_tty_write_room,
+	.chars_in_buffer	= dbc_tty_chars_in_buffer,
+	.unthrottle		= dbc_tty_unthrottle,
+};
+
+static void dbc_rx_push(struct tasklet_struct *t)
+{
+	struct dbc_request	*req;
+	struct tty_struct	*tty;
+	unsigned long		flags;
+	bool			do_push = false;
+	bool			disconnect = false;
+	struct dbc_port		*port = from_tasklet(port, t, push);
+	struct list_head	*queue = &port->read_queue;
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	tty = port->port.tty;
+	while (!list_empty(queue)) {
+		req = list_first_entry(queue, struct dbc_request, list_pool);
+
+		if (tty && tty_throttled(tty))
+			break;
+
+		switch (req->status) {
+		case 0:
+			break;
+		case -ESHUTDOWN:
+			disconnect = true;
+			break;
+		default:
+			pr_warn("ttyDBC0: unexpected RX status %d\n",
+				req->status);
+			break;
+		}
+
+		if (req->actual) {
+			char		*packet = req->buf;
+			unsigned int	n, size = req->actual;
+			int		count;
+
+			n = port->n_read;
+			if (n) {
+				packet += n;
+				size -= n;
+			}
+
+			count = tty_insert_flip_string(&port->port, packet,
+						       size);
+			if (count)
+				do_push = true;
+			if (count != size) {
+				port->n_read += count;
+				break;
+			}
+			port->n_read = 0;
+		}
+
+		list_move(&req->list_pool, &port->read_pool);
+	}
+
+	if (do_push)
+		tty_flip_buffer_push(&port->port);
+
+	if (!list_empty(queue) && tty) {
+		if (!tty_throttled(tty)) {
+			if (do_push)
+				tasklet_schedule(&port->push);
+			else
+				pr_warn("ttyDBC0: RX not scheduled?\n");
+		}
+	}
+
+	if (!disconnect)
+		dbc_start_rx(port);
+
+	spin_unlock_irqrestore(&port->port_lock, flags);
+}
+
+static int dbc_port_activate(struct tty_port *_port, struct tty_struct *tty)
+{
+	unsigned long	flags;
+	struct dbc_port	*port = container_of(_port, struct dbc_port, port);
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	dbc_start_rx(port);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+
+	return 0;
+}
+
+static const struct tty_port_operations dbc_port_ops = {
+	.activate =	dbc_port_activate,
+};
+
+static void
+xhci_dbc_tty_init_port(struct xhci_dbc *dbc, struct dbc_port *port)
+{
+	tty_port_init(&port->port);
+	spin_lock_init(&port->port_lock);
+	tasklet_setup(&port->push, dbc_rx_push);
+	INIT_LIST_HEAD(&port->read_pool);
+	INIT_LIST_HEAD(&port->read_queue);
+	INIT_LIST_HEAD(&port->write_pool);
+
+	port->port.ops =	&dbc_port_ops;
+	port->n_read =		0;
+}
+
+static void
+xhci_dbc_tty_exit_port(struct dbc_port *port)
+{
+	tasklet_kill(&port->push);
+	tty_port_destroy(&port->port);
+}
+
+static int xhci_dbc_tty_register_device(struct xhci_dbc *dbc)
+{
+	int			ret;
+	struct device		*tty_dev;
+	struct dbc_port		*port = dbc_to_port(dbc);
+
+	if (port->registered)
+		return -EBUSY;
+
+	xhci_dbc_tty_init_port(dbc, port);
+
+	mutex_lock(&dbc_tty_minors_lock);
+	port->minor = idr_alloc(&dbc_tty_minors, port, 0, 64, GFP_KERNEL);
+	mutex_unlock(&dbc_tty_minors_lock);
+
+	if (port->minor < 0) {
+		ret = port->minor;
+		goto err_idr;
+	}
+
+	ret = kfifo_alloc(&port->write_fifo, DBC_WRITE_BUF_SIZE, GFP_KERNEL);
+	if (ret)
+		goto err_exit_port;
+
+	ret = xhci_dbc_alloc_requests(dbc, BULK_IN, &port->read_pool,
+				      dbc_read_complete);
+	if (ret)
+		goto err_free_fifo;
+
+	ret = xhci_dbc_alloc_requests(dbc, BULK_OUT, &port->write_pool,
+				      dbc_write_complete);
+	if (ret)
+		goto err_free_requests;
+
+	tty_dev = tty_port_register_device(&port->port,
+					   dbc_tty_driver, port->minor, NULL);
+	if (IS_ERR(tty_dev)) {
+		ret = PTR_ERR(tty_dev);
+		goto err_free_requests;
+	}
+
+	port->registered = true;
+
+	return 0;
+
+err_free_requests:
+	xhci_dbc_free_requests(&port->read_pool);
+	xhci_dbc_free_requests(&port->write_pool);
+err_free_fifo:
+	kfifo_free(&port->write_fifo);
+err_exit_port:
+	idr_remove(&dbc_tty_minors, port->minor);
+err_idr:
+	xhci_dbc_tty_exit_port(port);
+
+	dev_err(dbc->dev, "can't register tty port, err %d\n", ret);
+
+	return ret;
+}
+
+static void xhci_dbc_tty_unregister_device(struct xhci_dbc *dbc)
+{
+	struct dbc_port		*port = dbc_to_port(dbc);
+
+	if (!port->registered)
+		return;
+	tty_unregister_device(dbc_tty_driver, port->minor);
+	xhci_dbc_tty_exit_port(port);
+	port->registered = false;
+
+	mutex_lock(&dbc_tty_minors_lock);
+	idr_remove(&dbc_tty_minors, port->minor);
+	mutex_unlock(&dbc_tty_minors_lock);
+
+	kfifo_free(&port->write_fifo);
+	xhci_dbc_free_requests(&port->read_pool);
+	xhci_dbc_free_requests(&port->read_queue);
+	xhci_dbc_free_requests(&port->write_pool);
+}
+
+static const struct dbc_driver dbc_driver = {
+	.configure		= xhci_dbc_tty_register_device,
+	.disconnect		= xhci_dbc_tty_unregister_device,
+};
+
+int xhci_dbc_tty_probe(struct device *dev, void __iomem *base, struct xhci_hcd *xhci)
+{
+	struct xhci_dbc		*dbc;
+	struct dbc_port		*port;
+	int			status;
+
+	if (!dbc_tty_driver)
+		return -ENODEV;
+
+	port = kzalloc(sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
+
+	dbc = xhci_alloc_dbc(dev, base, &dbc_driver);
+
+	if (!dbc) {
+		status = -ENOMEM;
+		goto out2;
+	}
+
+	dbc->priv = port;
+
+	/* get rid of xhci once this is a real driver binding to a device */
+	xhci->dbc = dbc;
+
+	return 0;
+out2:
+	kfree(port);
+
+	return status;
+}
+
+/*
+ * undo what probe did, assume dbc is stopped already.
+ * we also assume tty_unregister_device() is called before this
+ */
+void xhci_dbc_tty_remove(struct xhci_dbc *dbc)
+{
+	struct dbc_port         *port = dbc_to_port(dbc);
+
+	xhci_dbc_remove(dbc);
+	kfree(port);
+}
+
+int dbc_tty_init(void)
+{
+	int		ret;
+
+	idr_init(&dbc_tty_minors);
+
+	dbc_tty_driver = tty_alloc_driver(64, TTY_DRIVER_REAL_RAW |
+					  TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(dbc_tty_driver)) {
+		idr_destroy(&dbc_tty_minors);
+		return PTR_ERR(dbc_tty_driver);
+	}
+
+	dbc_tty_driver->driver_name = "dbc_serial";
+	dbc_tty_driver->name = "ttyDBC";
+
+	dbc_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	dbc_tty_driver->subtype = SERIAL_TYPE_NORMAL;
+	dbc_tty_driver->init_termios = tty_std_termios;
+	dbc_tty_driver->init_termios.c_cflag =
+			B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	dbc_tty_driver->init_termios.c_ispeed = 9600;
+	dbc_tty_driver->init_termios.c_ospeed = 9600;
+
+	tty_set_operations(dbc_tty_driver, &dbc_tty_ops);
+
+	ret = tty_register_driver(dbc_tty_driver);
+	if (ret) {
+		pr_err("Can't register dbc tty driver\n");
+		tty_driver_kref_put(dbc_tty_driver);
+		idr_destroy(&dbc_tty_minors);
+	}
+
+	return ret;
+}
+
+void dbc_tty_exit(void)
+{
+	if (dbc_tty_driver) {
+		tty_unregister_driver(dbc_tty_driver);
+		tty_driver_kref_put(dbc_tty_driver);
+		dbc_tty_driver = NULL;
+	}
+
+	idr_destroy(&dbc_tty_minors);
+}
diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c
new file mode 100644
index 000000000..bd40caeeb
--- /dev/null
+++ b/drivers/usb/host/xhci-debugfs.c
@@ -0,0 +1,726 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xhci-debugfs.c - xHCI debugfs interface
+ *
+ * Copyright (C) 2017 Intel Corporation
+ *
+ * Author: Lu Baolu <baolu.lu@linux.intel.com>
+ */
+
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include "xhci.h"
+#include "xhci-debugfs.h"
+
+static const struct debugfs_reg32 xhci_cap_regs[] = {
+	dump_register(CAPLENGTH),
+	dump_register(HCSPARAMS1),
+	dump_register(HCSPARAMS2),
+	dump_register(HCSPARAMS3),
+	dump_register(HCCPARAMS1),
+	dump_register(DOORBELLOFF),
+	dump_register(RUNTIMEOFF),
+	dump_register(HCCPARAMS2),
+};
+
+static const struct debugfs_reg32 xhci_op_regs[] = {
+	dump_register(USBCMD),
+	dump_register(USBSTS),
+	dump_register(PAGESIZE),
+	dump_register(DNCTRL),
+	dump_register(CRCR),
+	dump_register(DCBAAP_LOW),
+	dump_register(DCBAAP_HIGH),
+	dump_register(CONFIG),
+};
+
+static const struct debugfs_reg32 xhci_runtime_regs[] = {
+	dump_register(MFINDEX),
+	dump_register(IR0_IMAN),
+	dump_register(IR0_IMOD),
+	dump_register(IR0_ERSTSZ),
+	dump_register(IR0_ERSTBA_LOW),
+	dump_register(IR0_ERSTBA_HIGH),
+	dump_register(IR0_ERDP_LOW),
+	dump_register(IR0_ERDP_HIGH),
+};
+
+static const struct debugfs_reg32 xhci_extcap_legsup[] = {
+	dump_register(EXTCAP_USBLEGSUP),
+	dump_register(EXTCAP_USBLEGCTLSTS),
+};
+
+static const struct debugfs_reg32 xhci_extcap_protocol[] = {
+	dump_register(EXTCAP_REVISION),
+	dump_register(EXTCAP_NAME),
+	dump_register(EXTCAP_PORTINFO),
+	dump_register(EXTCAP_PORTTYPE),
+	dump_register(EXTCAP_MANTISSA1),
+	dump_register(EXTCAP_MANTISSA2),
+	dump_register(EXTCAP_MANTISSA3),
+	dump_register(EXTCAP_MANTISSA4),
+	dump_register(EXTCAP_MANTISSA5),
+	dump_register(EXTCAP_MANTISSA6),
+};
+
+static const struct debugfs_reg32 xhci_extcap_dbc[] = {
+	dump_register(EXTCAP_DBC_CAPABILITY),
+	dump_register(EXTCAP_DBC_DOORBELL),
+	dump_register(EXTCAP_DBC_ERSTSIZE),
+	dump_register(EXTCAP_DBC_ERST_LOW),
+	dump_register(EXTCAP_DBC_ERST_HIGH),
+	dump_register(EXTCAP_DBC_ERDP_LOW),
+	dump_register(EXTCAP_DBC_ERDP_HIGH),
+	dump_register(EXTCAP_DBC_CONTROL),
+	dump_register(EXTCAP_DBC_STATUS),
+	dump_register(EXTCAP_DBC_PORTSC),
+	dump_register(EXTCAP_DBC_CONT_LOW),
+	dump_register(EXTCAP_DBC_CONT_HIGH),
+	dump_register(EXTCAP_DBC_DEVINFO1),
+	dump_register(EXTCAP_DBC_DEVINFO2),
+};
+
+static struct dentry *xhci_debugfs_root;
+
+static struct xhci_regset *xhci_debugfs_alloc_regset(struct xhci_hcd *xhci)
+{
+	struct xhci_regset	*regset;
+
+	regset = kzalloc(sizeof(*regset), GFP_KERNEL);
+	if (!regset)
+		return NULL;
+
+	/*
+	 * The allocation and free of regset are executed in order.
+	 * We needn't a lock here.
+	 */
+	INIT_LIST_HEAD(&regset->list);
+	list_add_tail(&regset->list, &xhci->regset_list);
+
+	return regset;
+}
+
+static void xhci_debugfs_free_regset(struct xhci_regset *regset)
+{
+	if (!regset)
+		return;
+
+	list_del(&regset->list);
+	kfree(regset);
+}
+
+__printf(6, 7)
+static void xhci_debugfs_regset(struct xhci_hcd *xhci, u32 base,
+				const struct debugfs_reg32 *regs,
+				size_t nregs, struct dentry *parent,
+				const char *fmt, ...)
+{
+	struct xhci_regset	*rgs;
+	va_list			args;
+	struct debugfs_regset32	*regset;
+	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
+
+	rgs = xhci_debugfs_alloc_regset(xhci);
+	if (!rgs)
+		return;
+
+	va_start(args, fmt);
+	vsnprintf(rgs->name, sizeof(rgs->name), fmt, args);
+	va_end(args);
+
+	regset = &rgs->regset;
+	regset->regs = regs;
+	regset->nregs = nregs;
+	regset->base = hcd->regs + base;
+	regset->dev = hcd->self.controller;
+
+	debugfs_create_regset32((const char *)rgs->name, 0444, parent, regset);
+}
+
+static void xhci_debugfs_extcap_regset(struct xhci_hcd *xhci, int cap_id,
+				       const struct debugfs_reg32 *regs,
+				       size_t n, const char *cap_name)
+{
+	u32			offset;
+	int			index = 0;
+	size_t			psic, nregs = n;
+	void __iomem		*base = &xhci->cap_regs->hc_capbase;
+
+	offset = xhci_find_next_ext_cap(base, 0, cap_id);
+	while (offset) {
+		if (cap_id == XHCI_EXT_CAPS_PROTOCOL) {
+			psic = XHCI_EXT_PORT_PSIC(readl(base + offset + 8));
+			nregs = min(4 + psic, n);
+		}
+
+		xhci_debugfs_regset(xhci, offset, regs, nregs,
+				    xhci->debugfs_root, "%s:%02d",
+				    cap_name, index);
+		offset = xhci_find_next_ext_cap(base, offset, cap_id);
+		index++;
+	}
+}
+
+static int xhci_ring_enqueue_show(struct seq_file *s, void *unused)
+{
+	dma_addr_t		dma;
+	struct xhci_ring	*ring = *(struct xhci_ring **)s->private;
+
+	dma = xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue);
+	seq_printf(s, "%pad\n", &dma);
+
+	return 0;
+}
+
+static int xhci_ring_dequeue_show(struct seq_file *s, void *unused)
+{
+	dma_addr_t		dma;
+	struct xhci_ring	*ring = *(struct xhci_ring **)s->private;
+
+	dma = xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
+	seq_printf(s, "%pad\n", &dma);
+
+	return 0;
+}
+
+static int xhci_ring_cycle_show(struct seq_file *s, void *unused)
+{
+	struct xhci_ring	*ring = *(struct xhci_ring **)s->private;
+
+	seq_printf(s, "%d\n", ring->cycle_state);
+
+	return 0;
+}
+
+static void xhci_ring_dump_segment(struct seq_file *s,
+				   struct xhci_segment *seg)
+{
+	int			i;
+	dma_addr_t		dma;
+	union xhci_trb		*trb;
+	char			str[XHCI_MSG_MAX];
+
+	for (i = 0; i < TRBS_PER_SEGMENT; i++) {
+		trb = &seg->trbs[i];
+		dma = seg->dma + i * sizeof(*trb);
+		seq_printf(s, "%pad: %s\n", &dma,
+			   xhci_decode_trb(str, XHCI_MSG_MAX, le32_to_cpu(trb->generic.field[0]),
+					   le32_to_cpu(trb->generic.field[1]),
+					   le32_to_cpu(trb->generic.field[2]),
+					   le32_to_cpu(trb->generic.field[3])));
+	}
+}
+
+static int xhci_ring_trb_show(struct seq_file *s, void *unused)
+{
+	int			i;
+	struct xhci_ring	*ring = *(struct xhci_ring **)s->private;
+	struct xhci_segment	*seg = ring->first_seg;
+
+	for (i = 0; i < ring->num_segs; i++) {
+		xhci_ring_dump_segment(s, seg);
+		seg = seg->next;
+	}
+
+	return 0;
+}
+
+static struct xhci_file_map ring_files[] = {
+	{"enqueue",		xhci_ring_enqueue_show, },
+	{"dequeue",		xhci_ring_dequeue_show, },
+	{"cycle",		xhci_ring_cycle_show, },
+	{"trbs",		xhci_ring_trb_show, },
+};
+
+static int xhci_ring_open(struct inode *inode, struct file *file)
+{
+	int			i;
+	struct xhci_file_map	*f_map;
+	const char		*file_name = file_dentry(file)->d_iname;
+
+	for (i = 0; i < ARRAY_SIZE(ring_files); i++) {
+		f_map = &ring_files[i];
+
+		if (strcmp(f_map->name, file_name) == 0)
+			break;
+	}
+
+	return single_open(file, f_map->show, inode->i_private);
+}
+
+static const struct file_operations xhci_ring_fops = {
+	.open			= xhci_ring_open,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
+static int xhci_slot_context_show(struct seq_file *s, void *unused)
+{
+	struct xhci_hcd		*xhci;
+	struct xhci_slot_ctx	*slot_ctx;
+	struct xhci_slot_priv	*priv = s->private;
+	struct xhci_virt_device	*dev = priv->dev;
+	char			str[XHCI_MSG_MAX];
+
+	xhci = hcd_to_xhci(bus_to_hcd(dev->udev->bus));
+	slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
+	seq_printf(s, "%pad: %s\n", &dev->out_ctx->dma,
+		   xhci_decode_slot_context(str,
+					    le32_to_cpu(slot_ctx->dev_info),
+					    le32_to_cpu(slot_ctx->dev_info2),
+					    le32_to_cpu(slot_ctx->tt_info),
+					    le32_to_cpu(slot_ctx->dev_state)));
+
+	return 0;
+}
+
+static int xhci_endpoint_context_show(struct seq_file *s, void *unused)
+{
+	int			ep_index;
+	dma_addr_t		dma;
+	struct xhci_hcd		*xhci;
+	struct xhci_ep_ctx	*ep_ctx;
+	struct xhci_slot_priv	*priv = s->private;
+	struct xhci_virt_device	*dev = priv->dev;
+	char			str[XHCI_MSG_MAX];
+
+	xhci = hcd_to_xhci(bus_to_hcd(dev->udev->bus));
+
+	for (ep_index = 0; ep_index < 31; ep_index++) {
+		ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
+		dma = dev->out_ctx->dma + (ep_index + 1) * CTX_SIZE(xhci->hcc_params);
+		seq_printf(s, "%pad: %s\n", &dma,
+			   xhci_decode_ep_context(str,
+						  le32_to_cpu(ep_ctx->ep_info),
+						  le32_to_cpu(ep_ctx->ep_info2),
+						  le64_to_cpu(ep_ctx->deq),
+						  le32_to_cpu(ep_ctx->tx_info)));
+	}
+
+	return 0;
+}
+
+static int xhci_device_name_show(struct seq_file *s, void *unused)
+{
+	struct xhci_slot_priv	*priv = s->private;
+	struct xhci_virt_device	*dev = priv->dev;
+
+	seq_printf(s, "%s\n", dev_name(&dev->udev->dev));
+
+	return 0;
+}
+
+static struct xhci_file_map context_files[] = {
+	{"name",		xhci_device_name_show, },
+	{"slot-context",	xhci_slot_context_show, },
+	{"ep-context",		xhci_endpoint_context_show, },
+};
+
+static int xhci_context_open(struct inode *inode, struct file *file)
+{
+	int			i;
+	struct xhci_file_map	*f_map;
+	const char		*file_name = file_dentry(file)->d_iname;
+
+	for (i = 0; i < ARRAY_SIZE(context_files); i++) {
+		f_map = &context_files[i];
+
+		if (strcmp(f_map->name, file_name) == 0)
+			break;
+	}
+
+	return single_open(file, f_map->show, inode->i_private);
+}
+
+static const struct file_operations xhci_context_fops = {
+	.open			= xhci_context_open,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
+
+
+static int xhci_portsc_show(struct seq_file *s, void *unused)
+{
+	struct xhci_port	*port = s->private;
+	u32			portsc;
+	char			str[XHCI_MSG_MAX];
+
+	portsc = readl(port->addr);
+	seq_printf(s, "%s\n", xhci_decode_portsc(str, portsc));
+
+	return 0;
+}
+
+static int xhci_port_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, xhci_portsc_show, inode->i_private);
+}
+
+static ssize_t xhci_port_write(struct file *file,  const char __user *ubuf,
+			       size_t count, loff_t *ppos)
+{
+	struct seq_file         *s = file->private_data;
+	struct xhci_port	*port = s->private;
+	struct xhci_hcd		*xhci = hcd_to_xhci(port->rhub->hcd);
+	char                    buf[32];
+	u32			portsc;
+	unsigned long		flags;
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	if (!strncmp(buf, "compliance", 10)) {
+		/* If CTC is clear, compliance is enabled by default */
+		if (!HCC2_CTC(xhci->hcc_params2))
+			return count;
+		spin_lock_irqsave(&xhci->lock, flags);
+		/* compliance mode can only be enabled on ports in RxDetect */
+		portsc = readl(port->addr);
+		if ((portsc & PORT_PLS_MASK) != XDEV_RXDETECT) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			return -EPERM;
+		}
+		portsc = xhci_port_state_to_neutral(portsc);
+		portsc &= ~PORT_PLS_MASK;
+		portsc |= PORT_LINK_STROBE | XDEV_COMP_MODE;
+		writel(portsc, port->addr);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	} else {
+		return -EINVAL;
+	}
+	return count;
+}
+
+static const struct file_operations port_fops = {
+	.open			= xhci_port_open,
+	.write                  = xhci_port_write,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
+static void xhci_debugfs_create_files(struct xhci_hcd *xhci,
+				      struct xhci_file_map *files,
+				      size_t nentries, void *data,
+				      struct dentry *parent,
+				      const struct file_operations *fops)
+{
+	int			i;
+
+	for (i = 0; i < nentries; i++)
+		debugfs_create_file(files[i].name, 0444, parent, data, fops);
+}
+
+static struct dentry *xhci_debugfs_create_ring_dir(struct xhci_hcd *xhci,
+						   struct xhci_ring **ring,
+						   const char *name,
+						   struct dentry *parent)
+{
+	struct dentry		*dir;
+
+	dir = debugfs_create_dir(name, parent);
+	xhci_debugfs_create_files(xhci, ring_files, ARRAY_SIZE(ring_files),
+				  ring, dir, &xhci_ring_fops);
+
+	return dir;
+}
+
+static void xhci_debugfs_create_context_files(struct xhci_hcd *xhci,
+					      struct dentry *parent,
+					      int slot_id)
+{
+	struct xhci_virt_device	*dev = xhci->devs[slot_id];
+
+	xhci_debugfs_create_files(xhci, context_files,
+				  ARRAY_SIZE(context_files),
+				  dev->debugfs_private,
+				  parent, &xhci_context_fops);
+}
+
+void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,
+				  struct xhci_virt_device *dev,
+				  int ep_index)
+{
+	struct xhci_ep_priv	*epriv;
+	struct xhci_slot_priv	*spriv = dev->debugfs_private;
+
+	if (!spriv)
+		return;
+
+	if (spriv->eps[ep_index])
+		return;
+
+	epriv = kzalloc(sizeof(*epriv), GFP_KERNEL);
+	if (!epriv)
+		return;
+
+	epriv->show_ring = dev->eps[ep_index].ring;
+
+	snprintf(epriv->name, sizeof(epriv->name), "ep%02d", ep_index);
+	epriv->root = xhci_debugfs_create_ring_dir(xhci,
+						   &epriv->show_ring,
+						   epriv->name,
+						   spriv->root);
+	spriv->eps[ep_index] = epriv;
+}
+
+void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci,
+				  struct xhci_virt_device *dev,
+				  int ep_index)
+{
+	struct xhci_ep_priv	*epriv;
+	struct xhci_slot_priv	*spriv = dev->debugfs_private;
+
+	if (!spriv || !spriv->eps[ep_index])
+		return;
+
+	epriv = spriv->eps[ep_index];
+	debugfs_remove_recursive(epriv->root);
+	spriv->eps[ep_index] = NULL;
+	kfree(epriv);
+}
+
+static int xhci_stream_id_show(struct seq_file *s, void *unused)
+{
+	struct xhci_ep_priv	*epriv = s->private;
+
+	if (!epriv->stream_info)
+		return -EPERM;
+
+	seq_printf(s, "Show stream ID %d trb ring, supported [1 - %d]\n",
+		   epriv->stream_id, epriv->stream_info->num_streams - 1);
+
+	return 0;
+}
+
+static int xhci_stream_id_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, xhci_stream_id_show, inode->i_private);
+}
+
+static ssize_t xhci_stream_id_write(struct file *file,  const char __user *ubuf,
+			       size_t count, loff_t *ppos)
+{
+	struct seq_file         *s = file->private_data;
+	struct xhci_ep_priv	*epriv = s->private;
+	int			ret;
+	u16			stream_id; /* MaxPStreams + 1 <= 16 */
+
+	if (!epriv->stream_info)
+		return -EPERM;
+
+	/* Decimal number */
+	ret = kstrtou16_from_user(ubuf, count, 10, &stream_id);
+	if (ret)
+		return ret;
+
+	if (stream_id == 0 || stream_id >= epriv->stream_info->num_streams)
+		return -EINVAL;
+
+	epriv->stream_id = stream_id;
+	epriv->show_ring = epriv->stream_info->stream_rings[stream_id];
+
+	return count;
+}
+
+static const struct file_operations stream_id_fops = {
+	.open			= xhci_stream_id_open,
+	.write                  = xhci_stream_id_write,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
+static int xhci_stream_context_array_show(struct seq_file *s, void *unused)
+{
+	struct xhci_ep_priv	*epriv = s->private;
+	struct xhci_stream_ctx	*stream_ctx;
+	dma_addr_t		dma;
+	int			id;
+
+	if (!epriv->stream_info)
+		return -EPERM;
+
+	seq_printf(s, "Allocated %d streams and %d stream context array entries\n",
+			epriv->stream_info->num_streams,
+			epriv->stream_info->num_stream_ctxs);
+
+	for (id = 0; id < epriv->stream_info->num_stream_ctxs; id++) {
+		stream_ctx = epriv->stream_info->stream_ctx_array + id;
+		dma = epriv->stream_info->ctx_array_dma + id * 16;
+		if (id < epriv->stream_info->num_streams)
+			seq_printf(s, "%pad stream id %d deq %016llx\n", &dma,
+				   id, le64_to_cpu(stream_ctx->stream_ring));
+		else
+			seq_printf(s, "%pad stream context entry not used deq %016llx\n",
+				   &dma, le64_to_cpu(stream_ctx->stream_ring));
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(xhci_stream_context_array);
+
+void xhci_debugfs_create_stream_files(struct xhci_hcd *xhci,
+				      struct xhci_virt_device *dev,
+				      int ep_index)
+{
+	struct xhci_slot_priv	*spriv = dev->debugfs_private;
+	struct xhci_ep_priv	*epriv;
+
+	if (!spriv || !spriv->eps[ep_index] ||
+	    !dev->eps[ep_index].stream_info)
+		return;
+
+	epriv = spriv->eps[ep_index];
+	epriv->stream_info = dev->eps[ep_index].stream_info;
+
+	/* Show trb ring of stream ID 1 by default */
+	epriv->stream_id = 1;
+	epriv->show_ring = epriv->stream_info->stream_rings[1];
+	debugfs_create_file("stream_id", 0644,
+			    epriv->root, epriv,
+			    &stream_id_fops);
+	debugfs_create_file("stream_context_array", 0444,
+			    epriv->root, epriv,
+			    &xhci_stream_context_array_fops);
+}
+
+void xhci_debugfs_create_slot(struct xhci_hcd *xhci, int slot_id)
+{
+	struct xhci_slot_priv	*priv;
+	struct xhci_virt_device	*dev = xhci->devs[slot_id];
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return;
+
+	snprintf(priv->name, sizeof(priv->name), "%02d", slot_id);
+	priv->root = debugfs_create_dir(priv->name, xhci->debugfs_slots);
+	priv->dev = dev;
+	dev->debugfs_private = priv;
+
+	xhci_debugfs_create_ring_dir(xhci, &dev->eps[0].ring,
+				     "ep00", priv->root);
+
+	xhci_debugfs_create_context_files(xhci, priv->root, slot_id);
+}
+
+void xhci_debugfs_remove_slot(struct xhci_hcd *xhci, int slot_id)
+{
+	int			i;
+	struct xhci_slot_priv	*priv;
+	struct xhci_virt_device	*dev = xhci->devs[slot_id];
+
+	if (!dev || !dev->debugfs_private)
+		return;
+
+	priv = dev->debugfs_private;
+
+	debugfs_remove_recursive(priv->root);
+
+	for (i = 0; i < 31; i++)
+		kfree(priv->eps[i]);
+
+	kfree(priv);
+	dev->debugfs_private = NULL;
+}
+
+static void xhci_debugfs_create_ports(struct xhci_hcd *xhci,
+				      struct dentry *parent)
+{
+	unsigned int		num_ports;
+	char			port_name[8];
+	struct xhci_port	*port;
+	struct dentry		*dir;
+
+	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+
+	parent = debugfs_create_dir("ports", parent);
+
+	while (num_ports--) {
+		scnprintf(port_name, sizeof(port_name), "port%02d",
+			  num_ports + 1);
+		dir = debugfs_create_dir(port_name, parent);
+		port = &xhci->hw_ports[num_ports];
+		debugfs_create_file("portsc", 0644, dir, port, &port_fops);
+	}
+}
+
+void xhci_debugfs_init(struct xhci_hcd *xhci)
+{
+	struct device		*dev = xhci_to_hcd(xhci)->self.controller;
+
+	xhci->debugfs_root = debugfs_create_dir(dev_name(dev),
+						xhci_debugfs_root);
+
+	INIT_LIST_HEAD(&xhci->regset_list);
+
+	xhci_debugfs_regset(xhci,
+			    0,
+			    xhci_cap_regs, ARRAY_SIZE(xhci_cap_regs),
+			    xhci->debugfs_root, "reg-cap");
+
+	xhci_debugfs_regset(xhci,
+			    HC_LENGTH(readl(&xhci->cap_regs->hc_capbase)),
+			    xhci_op_regs, ARRAY_SIZE(xhci_op_regs),
+			    xhci->debugfs_root, "reg-op");
+
+	xhci_debugfs_regset(xhci,
+			    readl(&xhci->cap_regs->run_regs_off) & RTSOFF_MASK,
+			    xhci_runtime_regs, ARRAY_SIZE(xhci_runtime_regs),
+			    xhci->debugfs_root, "reg-runtime");
+
+	xhci_debugfs_extcap_regset(xhci, XHCI_EXT_CAPS_LEGACY,
+				   xhci_extcap_legsup,
+				   ARRAY_SIZE(xhci_extcap_legsup),
+				   "reg-ext-legsup");
+
+	xhci_debugfs_extcap_regset(xhci, XHCI_EXT_CAPS_PROTOCOL,
+				   xhci_extcap_protocol,
+				   ARRAY_SIZE(xhci_extcap_protocol),
+				   "reg-ext-protocol");
+
+	xhci_debugfs_extcap_regset(xhci, XHCI_EXT_CAPS_DEBUG,
+				   xhci_extcap_dbc,
+				   ARRAY_SIZE(xhci_extcap_dbc),
+				   "reg-ext-dbc");
+
+	xhci_debugfs_create_ring_dir(xhci, &xhci->cmd_ring,
+				     "command-ring",
+				     xhci->debugfs_root);
+
+	xhci_debugfs_create_ring_dir(xhci, &xhci->event_ring,
+				     "event-ring",
+				     xhci->debugfs_root);
+
+	xhci->debugfs_slots = debugfs_create_dir("devices", xhci->debugfs_root);
+
+	xhci_debugfs_create_ports(xhci, xhci->debugfs_root);
+}
+
+void xhci_debugfs_exit(struct xhci_hcd *xhci)
+{
+	struct xhci_regset	*rgs, *tmp;
+
+	debugfs_remove_recursive(xhci->debugfs_root);
+	xhci->debugfs_root = NULL;
+	xhci->debugfs_slots = NULL;
+
+	list_for_each_entry_safe(rgs, tmp, &xhci->regset_list, list)
+		xhci_debugfs_free_regset(rgs);
+}
+
+void __init xhci_debugfs_create_root(void)
+{
+	xhci_debugfs_root = debugfs_create_dir("xhci", usb_debug_root);
+}
+
+void __exit xhci_debugfs_remove_root(void)
+{
+	debugfs_remove_recursive(xhci_debugfs_root);
+	xhci_debugfs_root = NULL;
+}
diff --git a/drivers/usb/host/xhci-debugfs.h b/drivers/usb/host/xhci-debugfs.h
new file mode 100644
index 000000000..7c074b4be
--- /dev/null
+++ b/drivers/usb/host/xhci-debugfs.h
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * xhci-debugfs.h - xHCI debugfs interface
+ *
+ * Copyright (C) 2017 Intel Corporation
+ *
+ * Author: Lu Baolu <baolu.lu@linux.intel.com>
+ */
+
+#ifndef __LINUX_XHCI_DEBUGFS_H
+#define __LINUX_XHCI_DEBUGFS_H
+
+#include <linux/debugfs.h>
+
+#define DEBUGFS_NAMELEN 32
+
+#define REG_CAPLENGTH					0x00
+#define REG_HCSPARAMS1					0x04
+#define REG_HCSPARAMS2					0x08
+#define REG_HCSPARAMS3					0x0c
+#define REG_HCCPARAMS1					0x10
+#define REG_DOORBELLOFF					0x14
+#define REG_RUNTIMEOFF					0x18
+#define REG_HCCPARAMS2					0x1c
+
+#define	REG_USBCMD					0x00
+#define REG_USBSTS					0x04
+#define REG_PAGESIZE					0x08
+#define REG_DNCTRL					0x14
+#define REG_CRCR					0x18
+#define REG_DCBAAP_LOW					0x30
+#define REG_DCBAAP_HIGH					0x34
+#define REG_CONFIG					0x38
+
+#define REG_MFINDEX					0x00
+#define REG_IR0_IMAN					0x20
+#define REG_IR0_IMOD					0x24
+#define REG_IR0_ERSTSZ					0x28
+#define REG_IR0_ERSTBA_LOW				0x30
+#define REG_IR0_ERSTBA_HIGH				0x34
+#define REG_IR0_ERDP_LOW				0x38
+#define REG_IR0_ERDP_HIGH				0x3c
+
+#define REG_EXTCAP_USBLEGSUP				0x00
+#define REG_EXTCAP_USBLEGCTLSTS				0x04
+
+#define REG_EXTCAP_REVISION				0x00
+#define REG_EXTCAP_NAME					0x04
+#define REG_EXTCAP_PORTINFO				0x08
+#define REG_EXTCAP_PORTTYPE				0x0c
+#define REG_EXTCAP_MANTISSA1				0x10
+#define REG_EXTCAP_MANTISSA2				0x14
+#define REG_EXTCAP_MANTISSA3				0x18
+#define REG_EXTCAP_MANTISSA4				0x1c
+#define REG_EXTCAP_MANTISSA5				0x20
+#define REG_EXTCAP_MANTISSA6				0x24
+
+#define REG_EXTCAP_DBC_CAPABILITY			0x00
+#define REG_EXTCAP_DBC_DOORBELL				0x04
+#define REG_EXTCAP_DBC_ERSTSIZE				0x08
+#define REG_EXTCAP_DBC_ERST_LOW				0x10
+#define REG_EXTCAP_DBC_ERST_HIGH			0x14
+#define REG_EXTCAP_DBC_ERDP_LOW				0x18
+#define REG_EXTCAP_DBC_ERDP_HIGH			0x1c
+#define REG_EXTCAP_DBC_CONTROL				0x20
+#define REG_EXTCAP_DBC_STATUS				0x24
+#define REG_EXTCAP_DBC_PORTSC				0x28
+#define REG_EXTCAP_DBC_CONT_LOW				0x30
+#define REG_EXTCAP_DBC_CONT_HIGH			0x34
+#define REG_EXTCAP_DBC_DEVINFO1				0x38
+#define REG_EXTCAP_DBC_DEVINFO2				0x3c
+
+#define dump_register(nm)				\
+{							\
+	.name	= __stringify(nm),			\
+	.offset	= REG_ ##nm,				\
+}
+
+struct xhci_regset {
+	char			name[DEBUGFS_NAMELEN];
+	struct debugfs_regset32	regset;
+	size_t			nregs;
+	struct list_head	list;
+};
+
+struct xhci_file_map {
+	const char		*name;
+	int			(*show)(struct seq_file *s, void *unused);
+};
+
+struct xhci_ep_priv {
+	char			name[DEBUGFS_NAMELEN];
+	struct dentry		*root;
+	struct xhci_stream_info *stream_info;
+	struct xhci_ring	*show_ring;
+	unsigned int		stream_id;
+};
+
+struct xhci_slot_priv {
+	char			name[DEBUGFS_NAMELEN];
+	struct dentry		*root;
+	struct xhci_ep_priv	*eps[31];
+	struct xhci_virt_device	*dev;
+};
+
+#ifdef CONFIG_DEBUG_FS
+void xhci_debugfs_init(struct xhci_hcd *xhci);
+void xhci_debugfs_exit(struct xhci_hcd *xhci);
+void __init xhci_debugfs_create_root(void);
+void __exit xhci_debugfs_remove_root(void);
+void xhci_debugfs_create_slot(struct xhci_hcd *xhci, int slot_id);
+void xhci_debugfs_remove_slot(struct xhci_hcd *xhci, int slot_id);
+void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,
+				  struct xhci_virt_device *virt_dev,
+				  int ep_index);
+void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci,
+				  struct xhci_virt_device *virt_dev,
+				  int ep_index);
+void xhci_debugfs_create_stream_files(struct xhci_hcd *xhci,
+				      struct xhci_virt_device *virt_dev,
+				      int ep_index);
+#else
+static inline void xhci_debugfs_init(struct xhci_hcd *xhci) { }
+static inline void xhci_debugfs_exit(struct xhci_hcd *xhci) { }
+static inline void __init xhci_debugfs_create_root(void) { }
+static inline void __exit xhci_debugfs_remove_root(void) { }
+static inline void xhci_debugfs_create_slot(struct xhci_hcd *x, int s) { }
+static inline void xhci_debugfs_remove_slot(struct xhci_hcd *x, int s) { }
+static inline void
+xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,
+			     struct xhci_virt_device *virt_dev,
+			     int ep_index) { }
+static inline void
+xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci,
+			     struct xhci_virt_device *virt_dev,
+			     int ep_index) { }
+static inline void
+xhci_debugfs_create_stream_files(struct xhci_hcd *xhci,
+				 struct xhci_virt_device *virt_dev,
+				 int ep_index) { }
+#endif /* CONFIG_DEBUG_FS */
+
+#endif /* __LINUX_XHCI_DEBUGFS_H */
diff --git a/drivers/usb/host/xhci-ext-caps.c b/drivers/usb/host/xhci-ext-caps.c
new file mode 100644
index 000000000..7a4c2c4ad
--- /dev/null
+++ b/drivers/usb/host/xhci-ext-caps.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * XHCI extended capability handling
+ *
+ * Copyright (c) 2017 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/pci.h>
+#include "xhci.h"
+
+#define USB_SW_DRV_NAME		"intel_xhci_usb_sw"
+#define USB_SW_RESOURCE_SIZE	0x400
+
+#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI	0x22b5
+
+static const struct property_entry role_switch_props[] = {
+	PROPERTY_ENTRY_BOOL("sw_switch_disable"),
+	{},
+};
+
+static void xhci_intel_unregister_pdev(void *arg)
+{
+	platform_device_unregister(arg);
+}
+
+static int xhci_create_intel_xhci_sw_pdev(struct xhci_hcd *xhci, u32 cap_offset)
+{
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	struct device *dev = hcd->self.controller;
+	struct platform_device *pdev;
+	struct pci_dev *pci = to_pci_dev(dev);
+	struct resource	res = { 0, };
+	int ret;
+
+	pdev = platform_device_alloc(USB_SW_DRV_NAME, PLATFORM_DEVID_NONE);
+	if (!pdev) {
+		xhci_err(xhci, "couldn't allocate %s platform device\n",
+			 USB_SW_DRV_NAME);
+		return -ENOMEM;
+	}
+
+	res.start = hcd->rsrc_start + cap_offset;
+	res.end	  = res.start + USB_SW_RESOURCE_SIZE - 1;
+	res.name  = USB_SW_DRV_NAME;
+	res.flags = IORESOURCE_MEM;
+
+	ret = platform_device_add_resources(pdev, &res, 1);
+	if (ret) {
+		dev_err(dev, "couldn't add resources to intel_xhci_usb_sw pdev\n");
+		platform_device_put(pdev);
+		return ret;
+	}
+
+	if (pci->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
+		ret = device_create_managed_software_node(&pdev->dev, role_switch_props,
+							  NULL);
+		if (ret) {
+			dev_err(dev, "failed to register device properties\n");
+			platform_device_put(pdev);
+			return ret;
+		}
+	}
+
+	pdev->dev.parent = dev;
+
+	ret = platform_device_add(pdev);
+	if (ret) {
+		dev_err(dev, "couldn't register intel_xhci_usb_sw pdev\n");
+		platform_device_put(pdev);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev, xhci_intel_unregister_pdev, pdev);
+	if (ret) {
+		dev_err(dev, "couldn't add unregister action for intel_xhci_usb_sw pdev\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+int xhci_ext_cap_init(struct xhci_hcd *xhci)
+{
+	void __iomem *base = &xhci->cap_regs->hc_capbase;
+	u32 offset, val;
+	int ret;
+
+	offset = xhci_find_next_ext_cap(base, 0, 0);
+
+	while (offset) {
+		val = readl(base + offset);
+
+		switch (XHCI_EXT_CAPS_ID(val)) {
+		case XHCI_EXT_CAPS_VENDOR_INTEL:
+			if (xhci->quirks & XHCI_INTEL_USB_ROLE_SW) {
+				ret = xhci_create_intel_xhci_sw_pdev(xhci,
+								     offset);
+				if (ret)
+					return ret;
+			}
+			break;
+		}
+		offset = xhci_find_next_ext_cap(base, offset, 0);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xhci_ext_cap_init);
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
new file mode 100644
index 000000000..e8af0a125
--- /dev/null
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -0,0 +1,125 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ */
+
+/* HC should halt within 16 ms, but use 32 ms as some hosts take longer */
+#define XHCI_MAX_HALT_USEC	(32 * 1000)
+/* HC not running - set to 1 when run/stop bit is cleared. */
+#define XHCI_STS_HALT		(1<<0)
+
+/* HCCPARAMS offset from PCI base address */
+#define XHCI_HCC_PARAMS_OFFSET	0x10
+/* HCCPARAMS contains the first extended capability pointer */
+#define XHCI_HCC_EXT_CAPS(p)	(((p)>>16)&0xffff)
+
+/* Command and Status registers offset from the Operational Registers address */
+#define XHCI_CMD_OFFSET		0x00
+#define XHCI_STS_OFFSET		0x04
+
+#define XHCI_MAX_EXT_CAPS		50
+
+/* Capability Register */
+/* bits 7:0 - how long is the Capabilities register */
+#define XHCI_HC_LENGTH(p)	(((p)>>00)&0x00ff)
+
+/* Extended capability register fields */
+#define XHCI_EXT_CAPS_ID(p)	(((p)>>0)&0xff)
+#define XHCI_EXT_CAPS_NEXT(p)	(((p)>>8)&0xff)
+#define	XHCI_EXT_CAPS_VAL(p)	((p)>>16)
+/* Extended capability IDs - ID 0 reserved */
+#define XHCI_EXT_CAPS_LEGACY	1
+#define XHCI_EXT_CAPS_PROTOCOL	2
+#define XHCI_EXT_CAPS_PM	3
+#define XHCI_EXT_CAPS_VIRT	4
+#define XHCI_EXT_CAPS_ROUTE	5
+/* IDs 6-9 reserved */
+#define XHCI_EXT_CAPS_DEBUG	10
+/* Vendor caps */
+#define XHCI_EXT_CAPS_VENDOR_INTEL	192
+/* USB Legacy Support Capability - section 7.1.1 */
+#define XHCI_HC_BIOS_OWNED	(1 << 16)
+#define XHCI_HC_OS_OWNED	(1 << 24)
+
+/* USB Legacy Support Capability - section 7.1.1 */
+/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
+#define XHCI_LEGACY_SUPPORT_OFFSET	(0x00)
+
+/* USB Legacy Support Control and Status Register  - section 7.1.2 */
+/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
+#define XHCI_LEGACY_CONTROL_OFFSET	(0x04)
+/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
+#define	XHCI_LEGACY_DISABLE_SMI		((0x7 << 1) + (0xff << 5) + (0x7 << 17))
+#define XHCI_LEGACY_SMI_EVENTS		(0x7 << 29)
+
+/* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */
+#define XHCI_L1C               (1 << 16)
+
+/* USB 2.0 xHCI 1.0 hardware LMP capability - section 7.2.2.1.3.2 */
+#define XHCI_HLC               (1 << 19)
+#define XHCI_BLC               (1 << 20)
+
+/* command register values to disable interrupts and halt the HC */
+/* start/stop HC execution - do not write unless HC is halted*/
+#define XHCI_CMD_RUN		(1 << 0)
+/* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */
+#define XHCI_CMD_EIE		(1 << 2)
+/* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */
+#define XHCI_CMD_HSEIE		(1 << 3)
+/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
+#define XHCI_CMD_EWE		(1 << 10)
+
+#define XHCI_IRQS		(XHCI_CMD_EIE | XHCI_CMD_HSEIE | XHCI_CMD_EWE)
+
+/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
+#define XHCI_STS_CNR		(1 << 11)
+
+#include <linux/io.h>
+
+/**
+ * Find the offset of the extended capabilities with capability ID id.
+ *
+ * @base	PCI MMIO registers base address.
+ * @start	address at which to start looking, (0 or HCC_PARAMS to start at
+ *		beginning of list)
+ * @id		Extended capability ID to search for, or 0 for the next
+ *		capability
+ *
+ * Returns the offset of the next matching extended capability structure.
+ * Some capabilities can occur several times, e.g., the XHCI_EXT_CAPS_PROTOCOL,
+ * and this provides a way to find them all.
+ */
+
+static inline int xhci_find_next_ext_cap(void __iomem *base, u32 start, int id)
+{
+	u32 val;
+	u32 next;
+	u32 offset;
+
+	offset = start;
+	if (!start || start == XHCI_HCC_PARAMS_OFFSET) {
+		val = readl(base + XHCI_HCC_PARAMS_OFFSET);
+		if (val == ~0)
+			return 0;
+		offset = XHCI_HCC_EXT_CAPS(val) << 2;
+		if (!offset)
+			return 0;
+	}
+	do {
+		val = readl(base + offset);
+		if (val == ~0)
+			return 0;
+		if (offset != start && (id == 0 || XHCI_EXT_CAPS_ID(val) == id))
+			return offset;
+
+		next = XHCI_EXT_CAPS_NEXT(val);
+		offset += next << 2;
+	} while (next);
+
+	return 0;
+}
diff --git a/drivers/usb/host/xhci-histb.c b/drivers/usb/host/xhci-histb.c
new file mode 100644
index 000000000..083698576
--- /dev/null
+++ b/drivers/usb/host/xhci-histb.c
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xHCI host controller driver for HiSilicon STB SoCs
+ *
+ * Copyright (C) 2017-2018 HiSilicon Co., Ltd. http://www.hisilicon.com
+ *
+ * Authors: Jianguo Sun <sunjianguo1@huawei.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#include "xhci.h"
+
+#define GTXTHRCFG		0xc108
+#define GRXTHRCFG		0xc10c
+#define REG_GUSB2PHYCFG0	0xc200
+#define BIT_UTMI_8_16		BIT(3)
+#define BIT_UTMI_ULPI		BIT(4)
+#define BIT_FREECLK_EXIST	BIT(30)
+
+#define REG_GUSB3PIPECTL0	0xc2c0
+#define USB3_DEEMPHASIS_MASK	GENMASK(2, 1)
+#define USB3_DEEMPHASIS0	BIT(1)
+#define USB3_TX_MARGIN1		BIT(4)
+
+struct xhci_hcd_histb {
+	struct device		*dev;
+	struct usb_hcd		*hcd;
+	void __iomem		*ctrl;
+	struct clk		*bus_clk;
+	struct clk		*utmi_clk;
+	struct clk		*pipe_clk;
+	struct clk		*suspend_clk;
+	struct reset_control	*soft_reset;
+};
+
+static inline struct xhci_hcd_histb *hcd_to_histb(struct usb_hcd *hcd)
+{
+	return dev_get_drvdata(hcd->self.controller);
+}
+
+static int xhci_histb_config(struct xhci_hcd_histb *histb)
+{
+	struct device_node *np = histb->dev->of_node;
+	u32 regval;
+
+	if (of_property_match_string(np, "phys-names", "inno") >= 0) {
+		/* USB2 PHY chose ulpi 8bit interface */
+		regval = readl(histb->ctrl + REG_GUSB2PHYCFG0);
+		regval &= ~BIT_UTMI_ULPI;
+		regval &= ~(BIT_UTMI_8_16);
+		regval &= ~BIT_FREECLK_EXIST;
+		writel(regval, histb->ctrl + REG_GUSB2PHYCFG0);
+	}
+
+	if (of_property_match_string(np, "phys-names", "combo") >= 0) {
+		/*
+		 * write 0x010c0012 to GUSB3PIPECTL0
+		 * GUSB3PIPECTL0[5:3] = 010 : Tx Margin = 900mV ,
+		 * decrease TX voltage
+		 * GUSB3PIPECTL0[2:1] = 01 : Tx Deemphasis = -3.5dB,
+		 * refer to xHCI spec
+		 */
+		regval = readl(histb->ctrl + REG_GUSB3PIPECTL0);
+		regval &= ~USB3_DEEMPHASIS_MASK;
+		regval |= USB3_DEEMPHASIS0;
+		regval |= USB3_TX_MARGIN1;
+		writel(regval, histb->ctrl + REG_GUSB3PIPECTL0);
+	}
+
+	writel(0x23100000, histb->ctrl + GTXTHRCFG);
+	writel(0x23100000, histb->ctrl + GRXTHRCFG);
+
+	return 0;
+}
+
+static int xhci_histb_clks_get(struct xhci_hcd_histb *histb)
+{
+	struct device *dev = histb->dev;
+
+	histb->bus_clk = devm_clk_get(dev, "bus");
+	if (IS_ERR(histb->bus_clk)) {
+		dev_err(dev, "fail to get bus clk\n");
+		return PTR_ERR(histb->bus_clk);
+	}
+
+	histb->utmi_clk = devm_clk_get(dev, "utmi");
+	if (IS_ERR(histb->utmi_clk)) {
+		dev_err(dev, "fail to get utmi clk\n");
+		return PTR_ERR(histb->utmi_clk);
+	}
+
+	histb->pipe_clk = devm_clk_get(dev, "pipe");
+	if (IS_ERR(histb->pipe_clk)) {
+		dev_err(dev, "fail to get pipe clk\n");
+		return PTR_ERR(histb->pipe_clk);
+	}
+
+	histb->suspend_clk = devm_clk_get(dev, "suspend");
+	if (IS_ERR(histb->suspend_clk)) {
+		dev_err(dev, "fail to get suspend clk\n");
+		return PTR_ERR(histb->suspend_clk);
+	}
+
+	return 0;
+}
+
+static int xhci_histb_host_enable(struct xhci_hcd_histb *histb)
+{
+	int ret;
+
+	ret = clk_prepare_enable(histb->bus_clk);
+	if (ret) {
+		dev_err(histb->dev, "failed to enable bus clk\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(histb->utmi_clk);
+	if (ret) {
+		dev_err(histb->dev, "failed to enable utmi clk\n");
+		goto err_utmi_clk;
+	}
+
+	ret = clk_prepare_enable(histb->pipe_clk);
+	if (ret) {
+		dev_err(histb->dev, "failed to enable pipe clk\n");
+		goto err_pipe_clk;
+	}
+
+	ret = clk_prepare_enable(histb->suspend_clk);
+	if (ret) {
+		dev_err(histb->dev, "failed to enable suspend clk\n");
+		goto err_suspend_clk;
+	}
+
+	reset_control_deassert(histb->soft_reset);
+
+	return 0;
+
+err_suspend_clk:
+	clk_disable_unprepare(histb->pipe_clk);
+err_pipe_clk:
+	clk_disable_unprepare(histb->utmi_clk);
+err_utmi_clk:
+	clk_disable_unprepare(histb->bus_clk);
+
+	return ret;
+}
+
+static void xhci_histb_host_disable(struct xhci_hcd_histb *histb)
+{
+	reset_control_assert(histb->soft_reset);
+
+	clk_disable_unprepare(histb->suspend_clk);
+	clk_disable_unprepare(histb->pipe_clk);
+	clk_disable_unprepare(histb->utmi_clk);
+	clk_disable_unprepare(histb->bus_clk);
+}
+
+static void xhci_histb_quirks(struct device *dev, struct xhci_hcd *xhci)
+{
+	/*
+	 * As of now platform drivers don't provide MSI support so we ensure
+	 * here that the generic code does not try to make a pci_dev from our
+	 * dev struct in order to setup MSI
+	 */
+	xhci->quirks |= XHCI_PLAT;
+}
+
+/* called during probe() after chip reset completes */
+static int xhci_histb_setup(struct usb_hcd *hcd)
+{
+	struct xhci_hcd_histb *histb = hcd_to_histb(hcd);
+	int ret;
+
+	if (usb_hcd_is_primary_hcd(hcd)) {
+		ret = xhci_histb_config(histb);
+		if (ret)
+			return ret;
+	}
+
+	return xhci_gen_setup(hcd, xhci_histb_quirks);
+}
+
+static const struct xhci_driver_overrides xhci_histb_overrides __initconst = {
+	.reset = xhci_histb_setup,
+};
+
+static struct hc_driver __read_mostly xhci_histb_hc_driver;
+static int xhci_histb_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct xhci_hcd_histb *histb;
+	const struct hc_driver *driver;
+	struct usb_hcd *hcd;
+	struct xhci_hcd *xhci;
+	struct resource *res;
+	int irq;
+	int ret = -ENODEV;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	driver = &xhci_histb_hc_driver;
+	histb = devm_kzalloc(dev, sizeof(*histb), GFP_KERNEL);
+	if (!histb)
+		return -ENOMEM;
+
+	histb->dev = dev;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	histb->ctrl = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(histb->ctrl))
+		return PTR_ERR(histb->ctrl);
+
+	ret = xhci_histb_clks_get(histb);
+	if (ret)
+		return ret;
+
+	histb->soft_reset = devm_reset_control_get(dev, "soft");
+	if (IS_ERR(histb->soft_reset)) {
+		dev_err(dev, "failed to get soft reset\n");
+		return PTR_ERR(histb->soft_reset);
+	}
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+	device_enable_async_suspend(dev);
+
+	/* Initialize dma_mask and coherent_dma_mask to 32-bits */
+	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	if (ret)
+		goto disable_pm;
+
+	hcd = usb_create_hcd(driver, dev, dev_name(dev));
+	if (!hcd) {
+		ret = -ENOMEM;
+		goto disable_pm;
+	}
+
+	hcd->regs = histb->ctrl;
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	histb->hcd = hcd;
+	dev_set_drvdata(hcd->self.controller, histb);
+
+	ret = xhci_histb_host_enable(histb);
+	if (ret)
+		goto put_hcd;
+
+	xhci = hcd_to_xhci(hcd);
+
+	device_wakeup_enable(hcd->self.controller);
+
+	xhci->main_hcd = hcd;
+	xhci->shared_hcd = usb_create_shared_hcd(driver, dev, dev_name(dev),
+						 hcd);
+	if (!xhci->shared_hcd) {
+		ret = -ENOMEM;
+		goto disable_host;
+	}
+
+	if (device_property_read_bool(dev, "usb2-lpm-disable"))
+		xhci->quirks |= XHCI_HW_LPM_DISABLE;
+
+	if (device_property_read_bool(dev, "usb3-lpm-capable"))
+		xhci->quirks |= XHCI_LPM_SUPPORT;
+
+	/* imod_interval is the interrupt moderation value in nanoseconds. */
+	xhci->imod_interval = 40000;
+	device_property_read_u32(dev, "imod-interval-ns",
+				 &xhci->imod_interval);
+
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (ret)
+		goto put_usb3_hcd;
+
+	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+		xhci->shared_hcd->can_do_streams = 1;
+
+	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
+	if (ret)
+		goto dealloc_usb2_hcd;
+
+	device_enable_async_suspend(dev);
+	pm_runtime_put_noidle(dev);
+
+	/*
+	 * Prevent runtime pm from being on as default, users should enable
+	 * runtime pm using power/control in sysfs.
+	 */
+	pm_runtime_forbid(dev);
+
+	return 0;
+
+dealloc_usb2_hcd:
+	usb_remove_hcd(hcd);
+put_usb3_hcd:
+	usb_put_hcd(xhci->shared_hcd);
+disable_host:
+	xhci_histb_host_disable(histb);
+put_hcd:
+	usb_put_hcd(hcd);
+disable_pm:
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+
+	return ret;
+}
+
+static int xhci_histb_remove(struct platform_device *dev)
+{
+	struct xhci_hcd_histb *histb = platform_get_drvdata(dev);
+	struct usb_hcd *hcd = histb->hcd;
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct usb_hcd *shared_hcd = xhci->shared_hcd;
+
+	xhci->xhc_state |= XHCI_STATE_REMOVING;
+
+	usb_remove_hcd(shared_hcd);
+	xhci->shared_hcd = NULL;
+	device_wakeup_disable(&dev->dev);
+
+	usb_remove_hcd(hcd);
+	usb_put_hcd(shared_hcd);
+
+	xhci_histb_host_disable(histb);
+	usb_put_hcd(hcd);
+	pm_runtime_put_sync(&dev->dev);
+	pm_runtime_disable(&dev->dev);
+
+	return 0;
+}
+
+static int __maybe_unused xhci_histb_suspend(struct device *dev)
+{
+	struct xhci_hcd_histb *histb = dev_get_drvdata(dev);
+	struct usb_hcd *hcd = histb->hcd;
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int ret;
+
+	ret = xhci_suspend(xhci, device_may_wakeup(dev));
+
+	if (!device_may_wakeup(dev))
+		xhci_histb_host_disable(histb);
+
+	return ret;
+}
+
+static int __maybe_unused xhci_histb_resume(struct device *dev)
+{
+	struct xhci_hcd_histb *histb = dev_get_drvdata(dev);
+	struct usb_hcd *hcd = histb->hcd;
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+	if (!device_may_wakeup(dev))
+		xhci_histb_host_enable(histb);
+
+	return xhci_resume(xhci, 0);
+}
+
+static const struct dev_pm_ops xhci_histb_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(xhci_histb_suspend, xhci_histb_resume)
+};
+#define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &xhci_histb_pm_ops : NULL)
+
+#ifdef CONFIG_OF
+static const struct of_device_id histb_xhci_of_match[] = {
+	{ .compatible = "hisilicon,hi3798cv200-xhci"},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, histb_xhci_of_match);
+#endif
+
+static struct platform_driver histb_xhci_driver = {
+	.probe	= xhci_histb_probe,
+	.remove	= xhci_histb_remove,
+	.driver	= {
+		.name = "xhci-histb",
+		.pm = DEV_PM_OPS,
+		.of_match_table = of_match_ptr(histb_xhci_of_match),
+	},
+};
+MODULE_ALIAS("platform:xhci-histb");
+
+static int __init xhci_histb_init(void)
+{
+	xhci_init_driver(&xhci_histb_hc_driver, &xhci_histb_overrides);
+	return platform_driver_register(&histb_xhci_driver);
+}
+module_init(xhci_histb_init);
+
+static void __exit xhci_histb_exit(void)
+{
+	platform_driver_unregister(&histb_xhci_driver);
+}
+module_exit(xhci_histb_exit);
+
+MODULE_DESCRIPTION("HiSilicon STB xHCI Host Controller Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
new file mode 100644
index 000000000..4619d5e89
--- /dev/null
+++ b/drivers/usb/host/xhci-hub.c
@@ -0,0 +1,1980 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ */
+
+
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+#include <linux/bitfield.h>
+
+#include "xhci.h"
+#include "xhci-trace.h"
+
+#define	PORT_WAKE_BITS	(PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
+#define	PORT_RWC_BITS	(PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
+			 PORT_RC | PORT_PLC | PORT_PE)
+
+/* Default sublink speed attribute of each lane */
+static u32 ssp_cap_default_ssa[] = {
+	0x00050034, /* USB 3.0 SS Gen1x1 id:4 symmetric rx 5Gbps */
+	0x000500b4, /* USB 3.0 SS Gen1x1 id:4 symmetric tx 5Gbps */
+	0x000a4035, /* USB 3.1 SSP Gen2x1 id:5 symmetric rx 10Gbps */
+	0x000a40b5, /* USB 3.1 SSP Gen2x1 id:5 symmetric tx 10Gbps */
+	0x00054036, /* USB 3.2 SSP Gen1x2 id:6 symmetric rx 5Gbps */
+	0x000540b6, /* USB 3.2 SSP Gen1x2 id:6 symmetric tx 5Gbps */
+	0x000a4037, /* USB 3.2 SSP Gen2x2 id:7 symmetric rx 10Gbps */
+	0x000a40b7, /* USB 3.2 SSP Gen2x2 id:7 symmetric tx 10Gbps */
+};
+
+static int xhci_create_usb3x_bos_desc(struct xhci_hcd *xhci, char *buf,
+				      u16 wLength)
+{
+	struct usb_bos_descriptor	*bos;
+	struct usb_ss_cap_descriptor	*ss_cap;
+	struct usb_ssp_cap_descriptor	*ssp_cap;
+	struct xhci_port_cap		*port_cap = NULL;
+	u16				bcdUSB;
+	u32				reg;
+	u32				min_rate = 0;
+	u8				min_ssid;
+	u8				ssac;
+	u8				ssic;
+	int				offset;
+	int				i;
+
+	/* BOS descriptor */
+	bos = (struct usb_bos_descriptor *)buf;
+	bos->bLength = USB_DT_BOS_SIZE;
+	bos->bDescriptorType = USB_DT_BOS;
+	bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE +
+					USB_DT_USB_SS_CAP_SIZE);
+	bos->bNumDeviceCaps = 1;
+
+	/* Create the descriptor for port with the highest revision */
+	for (i = 0; i < xhci->num_port_caps; i++) {
+		u8 major = xhci->port_caps[i].maj_rev;
+		u8 minor = xhci->port_caps[i].min_rev;
+		u16 rev = (major << 8) | minor;
+
+		if (i == 0 || bcdUSB < rev) {
+			bcdUSB = rev;
+			port_cap = &xhci->port_caps[i];
+		}
+	}
+
+	if (bcdUSB >= 0x0310) {
+		if (port_cap->psi_count) {
+			u8 num_sym_ssa = 0;
+
+			for (i = 0; i < port_cap->psi_count; i++) {
+				if ((port_cap->psi[i] & PLT_MASK) == PLT_SYM)
+					num_sym_ssa++;
+			}
+
+			ssac = port_cap->psi_count + num_sym_ssa - 1;
+			ssic = port_cap->psi_uid_count - 1;
+		} else {
+			if (bcdUSB >= 0x0320)
+				ssac = 7;
+			else
+				ssac = 3;
+
+			ssic = (ssac + 1) / 2 - 1;
+		}
+
+		bos->bNumDeviceCaps++;
+		bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE +
+						USB_DT_USB_SS_CAP_SIZE +
+						USB_DT_USB_SSP_CAP_SIZE(ssac));
+	}
+
+	if (wLength < USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE)
+		return wLength;
+
+	/* SuperSpeed USB Device Capability */
+	ss_cap = (struct usb_ss_cap_descriptor *)&buf[USB_DT_BOS_SIZE];
+	ss_cap->bLength = USB_DT_USB_SS_CAP_SIZE;
+	ss_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
+	ss_cap->bDevCapabilityType = USB_SS_CAP_TYPE;
+	ss_cap->bmAttributes = 0; /* set later */
+	ss_cap->wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION);
+	ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION;
+	ss_cap->bU1devExitLat = 0; /* set later */
+	ss_cap->bU2DevExitLat = 0; /* set later */
+
+	reg = readl(&xhci->cap_regs->hcc_params);
+	if (HCC_LTC(reg))
+		ss_cap->bmAttributes |= USB_LTM_SUPPORT;
+
+	if ((xhci->quirks & XHCI_LPM_SUPPORT)) {
+		reg = readl(&xhci->cap_regs->hcs_params3);
+		ss_cap->bU1devExitLat = HCS_U1_LATENCY(reg);
+		ss_cap->bU2DevExitLat = cpu_to_le16(HCS_U2_LATENCY(reg));
+	}
+
+	if (wLength < le16_to_cpu(bos->wTotalLength))
+		return wLength;
+
+	if (bcdUSB < 0x0310)
+		return le16_to_cpu(bos->wTotalLength);
+
+	ssp_cap = (struct usb_ssp_cap_descriptor *)&buf[USB_DT_BOS_SIZE +
+		USB_DT_USB_SS_CAP_SIZE];
+	ssp_cap->bLength = USB_DT_USB_SSP_CAP_SIZE(ssac);
+	ssp_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
+	ssp_cap->bDevCapabilityType = USB_SSP_CAP_TYPE;
+	ssp_cap->bReserved = 0;
+	ssp_cap->wReserved = 0;
+	ssp_cap->bmAttributes =
+		cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_ATTRIBS, ssac) |
+			    FIELD_PREP(USB_SSP_SUBLINK_SPEED_IDS, ssic));
+
+	if (!port_cap->psi_count) {
+		for (i = 0; i < ssac + 1; i++)
+			ssp_cap->bmSublinkSpeedAttr[i] =
+				cpu_to_le32(ssp_cap_default_ssa[i]);
+
+		min_ssid = 4;
+		goto out;
+	}
+
+	offset = 0;
+	for (i = 0; i < port_cap->psi_count; i++) {
+		u32 psi;
+		u32 attr;
+		u8 ssid;
+		u8 lp;
+		u8 lse;
+		u8 psie;
+		u16 lane_mantissa;
+		u16 psim;
+		u16 plt;
+
+		psi = port_cap->psi[i];
+		ssid = XHCI_EXT_PORT_PSIV(psi);
+		lp = XHCI_EXT_PORT_LP(psi);
+		psie = XHCI_EXT_PORT_PSIE(psi);
+		psim = XHCI_EXT_PORT_PSIM(psi);
+		plt = psi & PLT_MASK;
+
+		lse = psie;
+		lane_mantissa = psim;
+
+		/* Shift to Gbps and set SSP Link Protocol if 10Gpbs */
+		for (; psie < USB_SSP_SUBLINK_SPEED_LSE_GBPS; psie++)
+			psim /= 1000;
+
+		if (!min_rate || psim < min_rate) {
+			min_ssid = ssid;
+			min_rate = psim;
+		}
+
+		/* Some host controllers don't set the link protocol for SSP */
+		if (psim >= 10)
+			lp = USB_SSP_SUBLINK_SPEED_LP_SSP;
+
+		/*
+		 * PSIM and PSIE represent the total speed of PSI. The BOS
+		 * descriptor SSP sublink speed attribute lane mantissa
+		 * describes the lane speed. E.g. PSIM and PSIE for gen2x2
+		 * is 20Gbps, but the BOS descriptor lane speed mantissa is
+		 * 10Gbps. Check and modify the mantissa value to match the
+		 * lane speed.
+		 */
+		if (bcdUSB == 0x0320 && plt == PLT_SYM) {
+			/*
+			 * The PSI dword for gen1x2 and gen2x1 share the same
+			 * values. But the lane speed for gen1x2 is 5Gbps while
+			 * gen2x1 is 10Gbps. If the previous PSI dword SSID is
+			 * 5 and the PSIE and PSIM match with SSID 6, let's
+			 * assume that the controller follows the default speed
+			 * id with SSID 6 for gen1x2.
+			 */
+			if (ssid == 6 && psie == 3 && psim == 10 && i) {
+				u32 prev = port_cap->psi[i - 1];
+
+				if ((prev & PLT_MASK) == PLT_SYM &&
+				    XHCI_EXT_PORT_PSIV(prev) == 5 &&
+				    XHCI_EXT_PORT_PSIE(prev) == 3 &&
+				    XHCI_EXT_PORT_PSIM(prev) == 10) {
+					lse = USB_SSP_SUBLINK_SPEED_LSE_GBPS;
+					lane_mantissa = 5;
+				}
+			}
+
+			if (psie == 3 && psim > 10) {
+				lse = USB_SSP_SUBLINK_SPEED_LSE_GBPS;
+				lane_mantissa = 10;
+			}
+		}
+
+		attr = (FIELD_PREP(USB_SSP_SUBLINK_SPEED_SSID, ssid) |
+			FIELD_PREP(USB_SSP_SUBLINK_SPEED_LP, lp) |
+			FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSE, lse) |
+			FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSM, lane_mantissa));
+
+		switch (plt) {
+		case PLT_SYM:
+			attr |= FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST,
+					   USB_SSP_SUBLINK_SPEED_ST_SYM_RX);
+			ssp_cap->bmSublinkSpeedAttr[offset++] = cpu_to_le32(attr);
+
+			attr &= ~USB_SSP_SUBLINK_SPEED_ST;
+			attr |= FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST,
+					   USB_SSP_SUBLINK_SPEED_ST_SYM_TX);
+			ssp_cap->bmSublinkSpeedAttr[offset++] = cpu_to_le32(attr);
+			break;
+		case PLT_ASYM_RX:
+			attr |= FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST,
+					   USB_SSP_SUBLINK_SPEED_ST_ASYM_RX);
+			ssp_cap->bmSublinkSpeedAttr[offset++] = cpu_to_le32(attr);
+			break;
+		case PLT_ASYM_TX:
+			attr |= FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST,
+					   USB_SSP_SUBLINK_SPEED_ST_ASYM_TX);
+			ssp_cap->bmSublinkSpeedAttr[offset++] = cpu_to_le32(attr);
+			break;
+		}
+	}
+out:
+	ssp_cap->wFunctionalitySupport =
+		cpu_to_le16(FIELD_PREP(USB_SSP_MIN_SUBLINK_SPEED_ATTRIBUTE_ID,
+				       min_ssid) |
+			    FIELD_PREP(USB_SSP_MIN_RX_LANE_COUNT, 1) |
+			    FIELD_PREP(USB_SSP_MIN_TX_LANE_COUNT, 1));
+
+	return le16_to_cpu(bos->wTotalLength);
+}
+
+static void xhci_common_hub_descriptor(struct xhci_hcd *xhci,
+		struct usb_hub_descriptor *desc, int ports)
+{
+	u16 temp;
+
+	desc->bHubContrCurrent = 0;
+
+	desc->bNbrPorts = ports;
+	temp = 0;
+	/* Bits 1:0 - support per-port power switching, or power always on */
+	if (HCC_PPC(xhci->hcc_params))
+		temp |= HUB_CHAR_INDV_PORT_LPSM;
+	else
+		temp |= HUB_CHAR_NO_LPSM;
+	/* Bit  2 - root hubs are not part of a compound device */
+	/* Bits 4:3 - individual port over current protection */
+	temp |= HUB_CHAR_INDV_PORT_OCPM;
+	/* Bits 6:5 - no TTs in root ports */
+	/* Bit  7 - no port indicators */
+	desc->wHubCharacteristics = cpu_to_le16(temp);
+}
+
+/* Fill in the USB 2.0 roothub descriptor */
+static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		struct usb_hub_descriptor *desc)
+{
+	int ports;
+	u16 temp;
+	__u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8];
+	u32 portsc;
+	unsigned int i;
+	struct xhci_hub *rhub;
+
+	rhub = &xhci->usb2_rhub;
+	ports = rhub->num_ports;
+	xhci_common_hub_descriptor(xhci, desc, ports);
+	desc->bDescriptorType = USB_DT_HUB;
+	temp = 1 + (ports / 8);
+	desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
+	desc->bPwrOn2PwrGood = 10;	/* xhci section 5.4.8 says 20ms */
+
+	/* The Device Removable bits are reported on a byte granularity.
+	 * If the port doesn't exist within that byte, the bit is set to 0.
+	 */
+	memset(port_removable, 0, sizeof(port_removable));
+	for (i = 0; i < ports; i++) {
+		portsc = readl(rhub->ports[i]->addr);
+		/* If a device is removable, PORTSC reports a 0, same as in the
+		 * hub descriptor DeviceRemovable bits.
+		 */
+		if (portsc & PORT_DEV_REMOVE)
+			/* This math is hairy because bit 0 of DeviceRemovable
+			 * is reserved, and bit 1 is for port 1, etc.
+			 */
+			port_removable[(i + 1) / 8] |= 1 << ((i + 1) % 8);
+	}
+
+	/* ch11.h defines a hub descriptor that has room for USB_MAXCHILDREN
+	 * ports on it.  The USB 2.0 specification says that there are two
+	 * variable length fields at the end of the hub descriptor:
+	 * DeviceRemovable and PortPwrCtrlMask.  But since we can have less than
+	 * USB_MAXCHILDREN ports, we may need to use the DeviceRemovable array
+	 * to set PortPwrCtrlMask bits.  PortPwrCtrlMask must always be set to
+	 * 0xFF, so we initialize the both arrays (DeviceRemovable and
+	 * PortPwrCtrlMask) to 0xFF.  Then we set the DeviceRemovable for each
+	 * set of ports that actually exist.
+	 */
+	memset(desc->u.hs.DeviceRemovable, 0xff,
+			sizeof(desc->u.hs.DeviceRemovable));
+	memset(desc->u.hs.PortPwrCtrlMask, 0xff,
+			sizeof(desc->u.hs.PortPwrCtrlMask));
+
+	for (i = 0; i < (ports + 1 + 7) / 8; i++)
+		memset(&desc->u.hs.DeviceRemovable[i], port_removable[i],
+				sizeof(__u8));
+}
+
+/* Fill in the USB 3.0 roothub descriptor */
+static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		struct usb_hub_descriptor *desc)
+{
+	int ports;
+	u16 port_removable;
+	u32 portsc;
+	unsigned int i;
+	struct xhci_hub *rhub;
+
+	rhub = &xhci->usb3_rhub;
+	ports = rhub->num_ports;
+	xhci_common_hub_descriptor(xhci, desc, ports);
+	desc->bDescriptorType = USB_DT_SS_HUB;
+	desc->bDescLength = USB_DT_SS_HUB_SIZE;
+	desc->bPwrOn2PwrGood = 50;	/* usb 3.1 may fail if less than 100ms */
+
+	/* header decode latency should be zero for roothubs,
+	 * see section 4.23.5.2.
+	 */
+	desc->u.ss.bHubHdrDecLat = 0;
+	desc->u.ss.wHubDelay = 0;
+
+	port_removable = 0;
+	/* bit 0 is reserved, bit 1 is for port 1, etc. */
+	for (i = 0; i < ports; i++) {
+		portsc = readl(rhub->ports[i]->addr);
+		if (portsc & PORT_DEV_REMOVE)
+			port_removable |= 1 << (i + 1);
+	}
+
+	desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable);
+}
+
+static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		struct usb_hub_descriptor *desc)
+{
+
+	if (hcd->speed >= HCD_USB3)
+		xhci_usb3_hub_descriptor(hcd, xhci, desc);
+	else
+		xhci_usb2_hub_descriptor(hcd, xhci, desc);
+
+}
+
+static unsigned int xhci_port_speed(unsigned int port_status)
+{
+	if (DEV_LOWSPEED(port_status))
+		return USB_PORT_STAT_LOW_SPEED;
+	if (DEV_HIGHSPEED(port_status))
+		return USB_PORT_STAT_HIGH_SPEED;
+	/*
+	 * FIXME: Yes, we should check for full speed, but the core uses that as
+	 * a default in portspeed() in usb/core/hub.c (which is the only place
+	 * USB_PORT_STAT_*_SPEED is used).
+	 */
+	return 0;
+}
+
+/*
+ * These bits are Read Only (RO) and should be saved and written to the
+ * registers: 0, 3, 10:13, 30
+ * connect status, over-current status, port speed, and device removable.
+ * connect status and port speed are also sticky - meaning they're in
+ * the AUX well and they aren't changed by a hot, warm, or cold reset.
+ */
+#define	XHCI_PORT_RO	((1<<0) | (1<<3) | (0xf<<10) | (1<<30))
+/*
+ * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
+ * bits 5:8, 9, 14:15, 25:27
+ * link state, port power, port indicator state, "wake on" enable state
+ */
+#define XHCI_PORT_RWS	((0xf<<5) | (1<<9) | (0x3<<14) | (0x7<<25))
+/*
+ * These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
+ * bit 4 (port reset)
+ */
+#define	XHCI_PORT_RW1S	((1<<4))
+/*
+ * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
+ * bits 1, 17, 18, 19, 20, 21, 22, 23
+ * port enable/disable, and
+ * change bits: connect, PED, warm port reset changed (reserved zero for USB 2.0 ports),
+ * over-current, reset, link state, and L1 change
+ */
+#define XHCI_PORT_RW1CS	((1<<1) | (0x7f<<17))
+/*
+ * Bit 16 is RW, and writing a '1' to it causes the link state control to be
+ * latched in
+ */
+#define	XHCI_PORT_RW	((1<<16))
+/*
+ * These bits are Reserved Zero (RsvdZ) and zero should be written to them:
+ * bits 2, 24, 28:31
+ */
+#define	XHCI_PORT_RZ	((1<<2) | (1<<24) | (0xf<<28))
+
+/*
+ * Given a port state, this function returns a value that would result in the
+ * port being in the same state, if the value was written to the port status
+ * control register.
+ * Save Read Only (RO) bits and save read/write bits where
+ * writing a 0 clears the bit and writing a 1 sets the bit (RWS).
+ * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
+ */
+u32 xhci_port_state_to_neutral(u32 state)
+{
+	/* Save read-only status and port state */
+	return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
+}
+
+/*
+ * find slot id based on port number.
+ * @port: The one-based port number from one of the two split roothubs.
+ */
+int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		u16 port)
+{
+	int slot_id;
+	int i;
+	enum usb_device_speed speed;
+
+	slot_id = 0;
+	for (i = 0; i < MAX_HC_SLOTS; i++) {
+		if (!xhci->devs[i] || !xhci->devs[i]->udev)
+			continue;
+		speed = xhci->devs[i]->udev->speed;
+		if (((speed >= USB_SPEED_SUPER) == (hcd->speed >= HCD_USB3))
+				&& xhci->devs[i]->fake_port == port) {
+			slot_id = i;
+			break;
+		}
+	}
+
+	return slot_id;
+}
+
+/*
+ * Stop device
+ * It issues stop endpoint command for EP 0 to 30. And wait the last command
+ * to complete.
+ * suspend will set to 1, if suspend bit need to set in command.
+ */
+static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
+{
+	struct xhci_virt_device *virt_dev;
+	struct xhci_command *cmd;
+	unsigned long flags;
+	int ret;
+	int i;
+
+	ret = 0;
+	virt_dev = xhci->devs[slot_id];
+	if (!virt_dev)
+		return -ENODEV;
+
+	trace_xhci_stop_device(virt_dev);
+
+	cmd = xhci_alloc_command(xhci, true, GFP_NOIO);
+	if (!cmd)
+		return -ENOMEM;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	for (i = LAST_EP_INDEX; i > 0; i--) {
+		if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) {
+			struct xhci_ep_ctx *ep_ctx;
+			struct xhci_command *command;
+
+			ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->out_ctx, i);
+
+			/* Check ep is running, required by AMD SNPS 3.1 xHC */
+			if (GET_EP_CTX_STATE(ep_ctx) != EP_STATE_RUNNING)
+				continue;
+
+			command = xhci_alloc_command(xhci, false, GFP_NOWAIT);
+			if (!command) {
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				ret = -ENOMEM;
+				goto cmd_cleanup;
+			}
+
+			ret = xhci_queue_stop_endpoint(xhci, command, slot_id,
+						       i, suspend);
+			if (ret) {
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				xhci_free_command(xhci, command);
+				goto cmd_cleanup;
+			}
+		}
+	}
+	ret = xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend);
+	if (ret) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		goto cmd_cleanup;
+	}
+
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Wait for last stop endpoint command to finish */
+	wait_for_completion(cmd->completion);
+
+	if (cmd->status == COMP_COMMAND_ABORTED ||
+	    cmd->status == COMP_COMMAND_RING_STOPPED) {
+		xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n");
+		ret = -ETIME;
+	}
+
+cmd_cleanup:
+	xhci_free_command(xhci, cmd);
+	return ret;
+}
+
+/*
+ * Ring device, it rings the all doorbells unconditionally.
+ */
+void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
+{
+	int i, s;
+	struct xhci_virt_ep *ep;
+
+	for (i = 0; i < LAST_EP_INDEX + 1; i++) {
+		ep = &xhci->devs[slot_id]->eps[i];
+
+		if (ep->ep_state & EP_HAS_STREAMS) {
+			for (s = 1; s < ep->stream_info->num_streams; s++)
+				xhci_ring_ep_doorbell(xhci, slot_id, i, s);
+		} else if (ep->ring && ep->ring->dequeue) {
+			xhci_ring_ep_doorbell(xhci, slot_id, i, 0);
+		}
+	}
+
+	return;
+}
+
+static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		u16 wIndex, __le32 __iomem *addr, u32 port_status)
+{
+	/* Don't allow the USB core to disable SuperSpeed ports. */
+	if (hcd->speed >= HCD_USB3) {
+		xhci_dbg(xhci, "Ignoring request to disable "
+				"SuperSpeed port.\n");
+		return;
+	}
+
+	if (xhci->quirks & XHCI_BROKEN_PORT_PED) {
+		xhci_dbg(xhci,
+			 "Broken Port Enabled/Disabled, ignoring port disable request.\n");
+		return;
+	}
+
+	/* Write 1 to disable the port */
+	writel(port_status | PORT_PE, addr);
+	port_status = readl(addr);
+	xhci_dbg(xhci, "disable port %d-%d, portsc: 0x%x\n",
+		 hcd->self.busnum, wIndex + 1, port_status);
+}
+
+static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
+		u16 wIndex, __le32 __iomem *addr, u32 port_status)
+{
+	char *port_change_bit;
+	u32 status;
+
+	switch (wValue) {
+	case USB_PORT_FEAT_C_RESET:
+		status = PORT_RC;
+		port_change_bit = "reset";
+		break;
+	case USB_PORT_FEAT_C_BH_PORT_RESET:
+		status = PORT_WRC;
+		port_change_bit = "warm(BH) reset";
+		break;
+	case USB_PORT_FEAT_C_CONNECTION:
+		status = PORT_CSC;
+		port_change_bit = "connect";
+		break;
+	case USB_PORT_FEAT_C_OVER_CURRENT:
+		status = PORT_OCC;
+		port_change_bit = "over-current";
+		break;
+	case USB_PORT_FEAT_C_ENABLE:
+		status = PORT_PEC;
+		port_change_bit = "enable/disable";
+		break;
+	case USB_PORT_FEAT_C_SUSPEND:
+		status = PORT_PLC;
+		port_change_bit = "suspend/resume";
+		break;
+	case USB_PORT_FEAT_C_PORT_LINK_STATE:
+		status = PORT_PLC;
+		port_change_bit = "link state";
+		break;
+	case USB_PORT_FEAT_C_PORT_CONFIG_ERROR:
+		status = PORT_CEC;
+		port_change_bit = "config error";
+		break;
+	default:
+		/* Should never happen */
+		return;
+	}
+	/* Change bits are all write 1 to clear */
+	writel(port_status | status, addr);
+	port_status = readl(addr);
+
+	xhci_dbg(xhci, "clear port%d %s change, portsc: 0x%x\n",
+		 wIndex + 1, port_change_bit, port_status);
+}
+
+struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+
+	if (hcd->speed >= HCD_USB3)
+		return &xhci->usb3_rhub;
+	return &xhci->usb2_rhub;
+}
+
+/*
+ * xhci_set_port_power() must be called with xhci->lock held.
+ * It will release and re-aquire the lock while calling ACPI
+ * method.
+ */
+static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd,
+				u16 index, bool on, unsigned long *flags)
+	__must_hold(&xhci->lock)
+{
+	struct xhci_hub *rhub;
+	struct xhci_port *port;
+	u32 temp;
+
+	rhub = xhci_get_rhub(hcd);
+	port = rhub->ports[index];
+	temp = readl(port->addr);
+
+	xhci_dbg(xhci, "set port power %d-%d %s, portsc: 0x%x\n",
+		 hcd->self.busnum, index + 1, on ? "ON" : "OFF", temp);
+
+	temp = xhci_port_state_to_neutral(temp);
+
+	if (on) {
+		/* Power on */
+		writel(temp | PORT_POWER, port->addr);
+		readl(port->addr);
+	} else {
+		/* Power off */
+		writel(temp & ~PORT_POWER, port->addr);
+	}
+
+	spin_unlock_irqrestore(&xhci->lock, *flags);
+	temp = usb_acpi_power_manageable(hcd->self.root_hub,
+					index);
+	if (temp)
+		usb_acpi_set_power_state(hcd->self.root_hub,
+			index, on);
+	spin_lock_irqsave(&xhci->lock, *flags);
+}
+
+static void xhci_port_set_test_mode(struct xhci_hcd *xhci,
+	u16 test_mode, u16 wIndex)
+{
+	u32 temp;
+	struct xhci_port *port;
+
+	/* xhci only supports test mode for usb2 ports */
+	port = xhci->usb2_rhub.ports[wIndex];
+	temp = readl(port->addr + PORTPMSC);
+	temp |= test_mode << PORT_TEST_MODE_SHIFT;
+	writel(temp, port->addr + PORTPMSC);
+	xhci->test_mode = test_mode;
+	if (test_mode == USB_TEST_FORCE_ENABLE)
+		xhci_start(xhci);
+}
+
+static int xhci_enter_test_mode(struct xhci_hcd *xhci,
+				u16 test_mode, u16 wIndex, unsigned long *flags)
+	__must_hold(&xhci->lock)
+{
+	struct usb_hcd *usb3_hcd = xhci_get_usb3_hcd(xhci);
+	int i, retval;
+
+	/* Disable all Device Slots */
+	xhci_dbg(xhci, "Disable all slots\n");
+	spin_unlock_irqrestore(&xhci->lock, *flags);
+	for (i = 1; i <= HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
+		if (!xhci->devs[i])
+			continue;
+
+		retval = xhci_disable_slot(xhci, i);
+		xhci_free_virt_device(xhci, i);
+		if (retval)
+			xhci_err(xhci, "Failed to disable slot %d, %d. Enter test mode anyway\n",
+				 i, retval);
+	}
+	spin_lock_irqsave(&xhci->lock, *flags);
+	/* Put all ports to the Disable state by clear PP */
+	xhci_dbg(xhci, "Disable all port (PP = 0)\n");
+	/* Power off USB3 ports*/
+	for (i = 0; i < xhci->usb3_rhub.num_ports; i++)
+		xhci_set_port_power(xhci, usb3_hcd, i, false, flags);
+	/* Power off USB2 ports*/
+	for (i = 0; i < xhci->usb2_rhub.num_ports; i++)
+		xhci_set_port_power(xhci, xhci->main_hcd, i, false, flags);
+	/* Stop the controller */
+	xhci_dbg(xhci, "Stop controller\n");
+	retval = xhci_halt(xhci);
+	if (retval)
+		return retval;
+	/* Disable runtime PM for test mode */
+	pm_runtime_forbid(xhci_to_hcd(xhci)->self.controller);
+	/* Set PORTPMSC.PTC field to enter selected test mode */
+	/* Port is selected by wIndex. port_id = wIndex + 1 */
+	xhci_dbg(xhci, "Enter Test Mode: %d, Port_id=%d\n",
+					test_mode, wIndex + 1);
+	xhci_port_set_test_mode(xhci, test_mode, wIndex);
+	return retval;
+}
+
+static int xhci_exit_test_mode(struct xhci_hcd *xhci)
+{
+	int retval;
+
+	if (!xhci->test_mode) {
+		xhci_err(xhci, "Not in test mode, do nothing.\n");
+		return 0;
+	}
+	if (xhci->test_mode == USB_TEST_FORCE_ENABLE &&
+		!(xhci->xhc_state & XHCI_STATE_HALTED)) {
+		retval = xhci_halt(xhci);
+		if (retval)
+			return retval;
+	}
+	pm_runtime_allow(xhci_to_hcd(xhci)->self.controller);
+	xhci->test_mode = 0;
+	return xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
+}
+
+void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
+			 u32 link_state)
+{
+	u32 temp;
+	u32 portsc;
+
+	portsc = readl(port->addr);
+	temp = xhci_port_state_to_neutral(portsc);
+	temp &= ~PORT_PLS_MASK;
+	temp |= PORT_LINK_STROBE | link_state;
+	writel(temp, port->addr);
+
+	xhci_dbg(xhci, "Set port %d-%d link state, portsc: 0x%x, write 0x%x",
+		 port->rhub->hcd->self.busnum, port->hcd_portnum + 1,
+		 portsc, temp);
+}
+
+static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
+				      struct xhci_port *port, u16 wake_mask)
+{
+	u32 temp;
+
+	temp = readl(port->addr);
+	temp = xhci_port_state_to_neutral(temp);
+
+	if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT)
+		temp |= PORT_WKCONN_E;
+	else
+		temp &= ~PORT_WKCONN_E;
+
+	if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT)
+		temp |= PORT_WKDISC_E;
+	else
+		temp &= ~PORT_WKDISC_E;
+
+	if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT)
+		temp |= PORT_WKOC_E;
+	else
+		temp &= ~PORT_WKOC_E;
+
+	writel(temp, port->addr);
+}
+
+/* Test and clear port RWC bit */
+void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port,
+			     u32 port_bit)
+{
+	u32 temp;
+
+	temp = readl(port->addr);
+	if (temp & port_bit) {
+		temp = xhci_port_state_to_neutral(temp);
+		temp |= port_bit;
+		writel(temp, port->addr);
+	}
+}
+
+/* Updates Link Status for super Speed port */
+static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci,
+		u32 *status, u32 status_reg)
+{
+	u32 pls = status_reg & PORT_PLS_MASK;
+
+	/* When the CAS bit is set then warm reset
+	 * should be performed on port
+	 */
+	if (status_reg & PORT_CAS) {
+		/* The CAS bit can be set while the port is
+		 * in any link state.
+		 * Only roothubs have CAS bit, so we
+		 * pretend to be in compliance mode
+		 * unless we're already in compliance
+		 * or the inactive state.
+		 */
+		if (pls != USB_SS_PORT_LS_COMP_MOD &&
+		    pls != USB_SS_PORT_LS_SS_INACTIVE) {
+			pls = USB_SS_PORT_LS_COMP_MOD;
+		}
+		/* Return also connection bit -
+		 * hub state machine resets port
+		 * when this bit is set.
+		 */
+		pls |= USB_PORT_STAT_CONNECTION;
+	} else {
+		/*
+		 * Resume state is an xHCI internal state.  Do not report it to
+		 * usb core, instead, pretend to be U3, thus usb core knows
+		 * it's not ready for transfer.
+		 */
+		if (pls == XDEV_RESUME) {
+			*status |= USB_SS_PORT_LS_U3;
+			return;
+		}
+
+		/*
+		 * If CAS bit isn't set but the Port is already at
+		 * Compliance Mode, fake a connection so the USB core
+		 * notices the Compliance state and resets the port.
+		 * This resolves an issue generated by the SN65LVPE502CP
+		 * in which sometimes the port enters compliance mode
+		 * caused by a delay on the host-device negotiation.
+		 */
+		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+				(pls == USB_SS_PORT_LS_COMP_MOD))
+			pls |= USB_PORT_STAT_CONNECTION;
+	}
+
+	/* update status field */
+	*status |= pls;
+}
+
+/*
+ * Function for Compliance Mode Quirk.
+ *
+ * This Function verifies if all xhc USB3 ports have entered U0, if so,
+ * the compliance mode timer is deleted. A port won't enter
+ * compliance mode if it has previously entered U0.
+ */
+static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status,
+				    u16 wIndex)
+{
+	u32 all_ports_seen_u0 = ((1 << xhci->usb3_rhub.num_ports) - 1);
+	bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0);
+
+	if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK))
+		return;
+
+	if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) {
+		xhci->port_status_u0 |= 1 << wIndex;
+		if (xhci->port_status_u0 == all_ports_seen_u0) {
+			del_timer_sync(&xhci->comp_mode_recovery_timer);
+			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"All USB3 ports have entered U0 already!");
+			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Compliance Mode Recovery Timer Deleted.");
+		}
+	}
+}
+
+static int xhci_handle_usb2_port_link_resume(struct xhci_port *port,
+					     u32 *status, u32 portsc,
+					     unsigned long *flags)
+{
+	struct xhci_bus_state *bus_state;
+	struct xhci_hcd	*xhci;
+	struct usb_hcd *hcd;
+	int slot_id;
+	u32 wIndex;
+
+	hcd = port->rhub->hcd;
+	bus_state = &port->rhub->bus_state;
+	xhci = hcd_to_xhci(hcd);
+	wIndex = port->hcd_portnum;
+
+	if ((portsc & PORT_RESET) || !(portsc & PORT_PE)) {
+		*status = 0xffffffff;
+		return -EINVAL;
+	}
+	/* did port event handler already start resume timing? */
+	if (!bus_state->resume_done[wIndex]) {
+		/* If not, maybe we are in a host initated resume? */
+		if (test_bit(wIndex, &bus_state->resuming_ports)) {
+			/* Host initated resume doesn't time the resume
+			 * signalling using resume_done[].
+			 * It manually sets RESUME state, sleeps 20ms
+			 * and sets U0 state. This should probably be
+			 * changed, but not right now.
+			 */
+		} else {
+			/* port resume was discovered now and here,
+			 * start resume timing
+			 */
+			unsigned long timeout = jiffies +
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
+
+			set_bit(wIndex, &bus_state->resuming_ports);
+			bus_state->resume_done[wIndex] = timeout;
+			mod_timer(&hcd->rh_timer, timeout);
+			usb_hcd_start_port_resume(&hcd->self, wIndex);
+		}
+	/* Has resume been signalled for USB_RESUME_TIME yet? */
+	} else if (time_after_eq(jiffies, bus_state->resume_done[wIndex])) {
+		int time_left;
+
+		xhci_dbg(xhci, "resume USB2 port %d-%d\n",
+			 hcd->self.busnum, wIndex + 1);
+
+		bus_state->resume_done[wIndex] = 0;
+		clear_bit(wIndex, &bus_state->resuming_ports);
+
+		set_bit(wIndex, &bus_state->rexit_ports);
+
+		xhci_test_and_clear_bit(xhci, port, PORT_PLC);
+		xhci_set_link_state(xhci, port, XDEV_U0);
+
+		spin_unlock_irqrestore(&xhci->lock, *flags);
+		time_left = wait_for_completion_timeout(
+			&bus_state->rexit_done[wIndex],
+			msecs_to_jiffies(XHCI_MAX_REXIT_TIMEOUT_MS));
+		spin_lock_irqsave(&xhci->lock, *flags);
+
+		if (time_left) {
+			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+							    wIndex + 1);
+			if (!slot_id) {
+				xhci_dbg(xhci, "slot_id is zero\n");
+				*status = 0xffffffff;
+				return -ENODEV;
+			}
+			xhci_ring_device(xhci, slot_id);
+		} else {
+			int port_status = readl(port->addr);
+
+			xhci_warn(xhci, "Port resume timed out, port %d-%d: 0x%x\n",
+				  hcd->self.busnum, wIndex + 1, port_status);
+			*status |= USB_PORT_STAT_SUSPEND;
+			clear_bit(wIndex, &bus_state->rexit_ports);
+		}
+
+		usb_hcd_end_port_resume(&hcd->self, wIndex);
+		bus_state->port_c_suspend |= 1 << wIndex;
+		bus_state->suspended_ports &= ~(1 << wIndex);
+	} else {
+		/*
+		 * The resume has been signaling for less than
+		 * USB_RESUME_TIME. Report the port status as SUSPEND,
+		 * let the usbcore check port status again and clear
+		 * resume signaling later.
+		 */
+		*status |= USB_PORT_STAT_SUSPEND;
+	}
+	return 0;
+}
+
+static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li)
+{
+	u32 ext_stat = 0;
+	int speed_id;
+
+	/* only support rx and tx lane counts of 1 in usb3.1 spec */
+	speed_id = DEV_PORT_SPEED(raw_port_status);
+	ext_stat |= speed_id;		/* bits 3:0, RX speed id */
+	ext_stat |= speed_id << 4;	/* bits 7:4, TX speed id */
+
+	ext_stat |= PORT_RX_LANES(port_li) << 8;  /* bits 11:8 Rx lane count */
+	ext_stat |= PORT_TX_LANES(port_li) << 12; /* bits 15:12 Tx lane count */
+
+	return ext_stat;
+}
+
+static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status,
+				      u32 portsc)
+{
+	struct xhci_bus_state *bus_state;
+	struct xhci_hcd	*xhci;
+	struct usb_hcd *hcd;
+	u32 link_state;
+	u32 portnum;
+
+	bus_state = &port->rhub->bus_state;
+	xhci = hcd_to_xhci(port->rhub->hcd);
+	hcd = port->rhub->hcd;
+	link_state = portsc & PORT_PLS_MASK;
+	portnum = port->hcd_portnum;
+
+	/* USB3 specific wPortChange bits
+	 *
+	 * Port link change with port in resume state should not be
+	 * reported to usbcore, as this is an internal state to be
+	 * handled by xhci driver. Reporting PLC to usbcore may
+	 * cause usbcore clearing PLC first and port change event
+	 * irq won't be generated.
+	 */
+
+	if (portsc & PORT_PLC && (link_state != XDEV_RESUME))
+		*status |= USB_PORT_STAT_C_LINK_STATE << 16;
+	if (portsc & PORT_WRC)
+		*status |= USB_PORT_STAT_C_BH_RESET << 16;
+	if (portsc & PORT_CEC)
+		*status |= USB_PORT_STAT_C_CONFIG_ERROR << 16;
+
+	/* USB3 specific wPortStatus bits */
+	if (portsc & PORT_POWER) {
+		*status |= USB_SS_PORT_STAT_POWER;
+		/* link state handling */
+		if (link_state == XDEV_U0)
+			bus_state->suspended_ports &= ~(1 << portnum);
+	}
+
+	/* remote wake resume signaling complete */
+	if (bus_state->port_remote_wakeup & (1 << portnum) &&
+	    link_state != XDEV_RESUME &&
+	    link_state != XDEV_RECOVERY) {
+		bus_state->port_remote_wakeup &= ~(1 << portnum);
+		usb_hcd_end_port_resume(&hcd->self, portnum);
+	}
+
+	xhci_hub_report_usb3_link_state(xhci, status, portsc);
+	xhci_del_comp_mod_timer(xhci, portsc, portnum);
+}
+
+static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status,
+				      u32 portsc, unsigned long *flags)
+{
+	struct xhci_bus_state *bus_state;
+	u32 link_state;
+	u32 portnum;
+	int ret;
+
+	bus_state = &port->rhub->bus_state;
+	link_state = portsc & PORT_PLS_MASK;
+	portnum = port->hcd_portnum;
+
+	/* USB2 wPortStatus bits */
+	if (portsc & PORT_POWER) {
+		*status |= USB_PORT_STAT_POWER;
+
+		/* link state is only valid if port is powered */
+		if (link_state == XDEV_U3)
+			*status |= USB_PORT_STAT_SUSPEND;
+		if (link_state == XDEV_U2)
+			*status |= USB_PORT_STAT_L1;
+		if (link_state == XDEV_U0) {
+			if (bus_state->resume_done[portnum])
+				usb_hcd_end_port_resume(&port->rhub->hcd->self,
+							portnum);
+			bus_state->resume_done[portnum] = 0;
+			clear_bit(portnum, &bus_state->resuming_ports);
+			if (bus_state->suspended_ports & (1 << portnum)) {
+				bus_state->suspended_ports &= ~(1 << portnum);
+				bus_state->port_c_suspend |= 1 << portnum;
+			}
+		}
+		if (link_state == XDEV_RESUME) {
+			ret = xhci_handle_usb2_port_link_resume(port, status,
+								portsc, flags);
+			if (ret)
+				return;
+		}
+	}
+}
+
+/*
+ * Converts a raw xHCI port status into the format that external USB 2.0 or USB
+ * 3.0 hubs use.
+ *
+ * Possible side effects:
+ *  - Mark a port as being done with device resume,
+ *    and ring the endpoint doorbells.
+ *  - Stop the Synopsys redriver Compliance Mode polling.
+ *  - Drop and reacquire the xHCI lock, in order to wait for port resume.
+ */
+static u32 xhci_get_port_status(struct usb_hcd *hcd,
+		struct xhci_bus_state *bus_state,
+	u16 wIndex, u32 raw_port_status,
+		unsigned long *flags)
+	__releases(&xhci->lock)
+	__acquires(&xhci->lock)
+{
+	u32 status = 0;
+	struct xhci_hub *rhub;
+	struct xhci_port *port;
+
+	rhub = xhci_get_rhub(hcd);
+	port = rhub->ports[wIndex];
+
+	/* common wPortChange bits */
+	if (raw_port_status & PORT_CSC)
+		status |= USB_PORT_STAT_C_CONNECTION << 16;
+	if (raw_port_status & PORT_PEC)
+		status |= USB_PORT_STAT_C_ENABLE << 16;
+	if ((raw_port_status & PORT_OCC))
+		status |= USB_PORT_STAT_C_OVERCURRENT << 16;
+	if ((raw_port_status & PORT_RC))
+		status |= USB_PORT_STAT_C_RESET << 16;
+
+	/* common wPortStatus bits */
+	if (raw_port_status & PORT_CONNECT) {
+		status |= USB_PORT_STAT_CONNECTION;
+		status |= xhci_port_speed(raw_port_status);
+	}
+	if (raw_port_status & PORT_PE)
+		status |= USB_PORT_STAT_ENABLE;
+	if (raw_port_status & PORT_OC)
+		status |= USB_PORT_STAT_OVERCURRENT;
+	if (raw_port_status & PORT_RESET)
+		status |= USB_PORT_STAT_RESET;
+
+	/* USB2 and USB3 specific bits, including Port Link State */
+	if (hcd->speed >= HCD_USB3)
+		xhci_get_usb3_port_status(port, &status, raw_port_status);
+	else
+		xhci_get_usb2_port_status(port, &status, raw_port_status,
+					  flags);
+	/*
+	 * Clear stale usb2 resume signalling variables in case port changed
+	 * state during resume signalling. For example on error
+	 */
+	if ((bus_state->resume_done[wIndex] ||
+	     test_bit(wIndex, &bus_state->resuming_ports)) &&
+	    (raw_port_status & PORT_PLS_MASK) != XDEV_U3 &&
+	    (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) {
+		bus_state->resume_done[wIndex] = 0;
+		clear_bit(wIndex, &bus_state->resuming_ports);
+		usb_hcd_end_port_resume(&hcd->self, wIndex);
+	}
+
+	if (bus_state->port_c_suspend & (1 << wIndex))
+		status |= USB_PORT_STAT_C_SUSPEND << 16;
+
+	return status;
+}
+
+int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+		u16 wIndex, char *buf, u16 wLength)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int max_ports;
+	unsigned long flags;
+	u32 temp, status;
+	int retval = 0;
+	int slot_id;
+	struct xhci_bus_state *bus_state;
+	u16 link_state = 0;
+	u16 wake_mask = 0;
+	u16 timeout = 0;
+	u16 test_mode = 0;
+	struct xhci_hub *rhub;
+	struct xhci_port **ports;
+
+	rhub = xhci_get_rhub(hcd);
+	ports = rhub->ports;
+	max_ports = rhub->num_ports;
+	bus_state = &rhub->bus_state;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	switch (typeReq) {
+	case GetHubStatus:
+		/* No power source, over-current reported per port */
+		memset(buf, 0, 4);
+		break;
+	case GetHubDescriptor:
+		/* Check to make sure userspace is asking for the USB 3.0 hub
+		 * descriptor for the USB 3.0 roothub.  If not, we stall the
+		 * endpoint, like external hubs do.
+		 */
+		if (hcd->speed >= HCD_USB3 &&
+				(wLength < USB_DT_SS_HUB_SIZE ||
+				 wValue != (USB_DT_SS_HUB << 8))) {
+			xhci_dbg(xhci, "Wrong hub descriptor type for "
+					"USB 3.0 roothub.\n");
+			goto error;
+		}
+		xhci_hub_descriptor(hcd, xhci,
+				(struct usb_hub_descriptor *) buf);
+		break;
+	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+		if ((wValue & 0xff00) != (USB_DT_BOS << 8))
+			goto error;
+
+		if (hcd->speed < HCD_USB3)
+			goto error;
+
+		retval = xhci_create_usb3x_bos_desc(xhci, buf, wLength);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return retval;
+	case GetPortStatus:
+		if (!wIndex || wIndex > max_ports)
+			goto error;
+		wIndex--;
+		temp = readl(ports[wIndex]->addr);
+		if (temp == ~(u32)0) {
+			xhci_hc_died(xhci);
+			retval = -ENODEV;
+			break;
+		}
+		trace_xhci_get_port_status(wIndex, temp);
+		status = xhci_get_port_status(hcd, bus_state, wIndex, temp,
+					      &flags);
+		if (status == 0xffffffff)
+			goto error;
+
+		xhci_dbg(xhci, "Get port status %d-%d read: 0x%x, return 0x%x",
+			 hcd->self.busnum, wIndex + 1, temp, status);
+
+		put_unaligned(cpu_to_le32(status), (__le32 *) buf);
+		/* if USB 3.1 extended port status return additional 4 bytes */
+		if (wValue == 0x02) {
+			u32 port_li;
+
+			if (hcd->speed < HCD_USB31 || wLength != 8) {
+				xhci_err(xhci, "get ext port status invalid parameter\n");
+				retval = -EINVAL;
+				break;
+			}
+			port_li = readl(ports[wIndex]->addr + PORTLI);
+			status = xhci_get_ext_port_status(temp, port_li);
+			put_unaligned_le32(status, &buf[4]);
+		}
+		break;
+	case SetPortFeature:
+		if (wValue == USB_PORT_FEAT_LINK_STATE)
+			link_state = (wIndex & 0xff00) >> 3;
+		if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK)
+			wake_mask = wIndex & 0xff00;
+		if (wValue == USB_PORT_FEAT_TEST)
+			test_mode = (wIndex & 0xff00) >> 8;
+		/* The MSB of wIndex is the U1/U2 timeout */
+		timeout = (wIndex & 0xff00) >> 8;
+		wIndex &= 0xff;
+		if (!wIndex || wIndex > max_ports)
+			goto error;
+		wIndex--;
+		temp = readl(ports[wIndex]->addr);
+		if (temp == ~(u32)0) {
+			xhci_hc_died(xhci);
+			retval = -ENODEV;
+			break;
+		}
+		temp = xhci_port_state_to_neutral(temp);
+		/* FIXME: What new port features do we need to support? */
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			temp = readl(ports[wIndex]->addr);
+			if ((temp & PORT_PLS_MASK) != XDEV_U0) {
+				/* Resume the port to U0 first */
+				xhci_set_link_state(xhci, ports[wIndex],
+							XDEV_U0);
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				msleep(10);
+				spin_lock_irqsave(&xhci->lock, flags);
+			}
+			/* In spec software should not attempt to suspend
+			 * a port unless the port reports that it is in the
+			 * enabled (PED = ‘1’,PLS < ‘3’) state.
+			 */
+			temp = readl(ports[wIndex]->addr);
+			if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
+				|| (temp & PORT_PLS_MASK) >= XDEV_U3) {
+				xhci_warn(xhci, "USB core suspending port %d-%d not in U0/U1/U2\n",
+					  hcd->self.busnum, wIndex + 1);
+				goto error;
+			}
+
+			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+					wIndex + 1);
+			if (!slot_id) {
+				xhci_warn(xhci, "slot_id is zero\n");
+				goto error;
+			}
+			/* unlock to execute stop endpoint commands */
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_stop_device(xhci, slot_id, 1);
+			spin_lock_irqsave(&xhci->lock, flags);
+
+			xhci_set_link_state(xhci, ports[wIndex], XDEV_U3);
+
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			msleep(10); /* wait device to enter */
+			spin_lock_irqsave(&xhci->lock, flags);
+
+			temp = readl(ports[wIndex]->addr);
+			bus_state->suspended_ports |= 1 << wIndex;
+			break;
+		case USB_PORT_FEAT_LINK_STATE:
+			temp = readl(ports[wIndex]->addr);
+			/* Disable port */
+			if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
+				xhci_dbg(xhci, "Disable port %d-%d\n",
+					 hcd->self.busnum, wIndex + 1);
+				temp = xhci_port_state_to_neutral(temp);
+				/*
+				 * Clear all change bits, so that we get a new
+				 * connection event.
+				 */
+				temp |= PORT_CSC | PORT_PEC | PORT_WRC |
+					PORT_OCC | PORT_RC | PORT_PLC |
+					PORT_CEC;
+				writel(temp | PORT_PE, ports[wIndex]->addr);
+				temp = readl(ports[wIndex]->addr);
+				break;
+			}
+
+			/* Put link in RxDetect (enable port) */
+			if (link_state == USB_SS_PORT_LS_RX_DETECT) {
+				xhci_dbg(xhci, "Enable port %d-%d\n",
+					 hcd->self.busnum, wIndex + 1);
+				xhci_set_link_state(xhci, ports[wIndex],
+							link_state);
+				temp = readl(ports[wIndex]->addr);
+				break;
+			}
+
+			/*
+			 * For xHCI 1.1 according to section 4.19.1.2.4.1 a
+			 * root hub port's transition to compliance mode upon
+			 * detecting LFPS timeout may be controlled by an
+			 * Compliance Transition Enabled (CTE) flag (not
+			 * software visible). This flag is set by writing 0xA
+			 * to PORTSC PLS field which will allow transition to
+			 * compliance mode the next time LFPS timeout is
+			 * encountered. A warm reset will clear it.
+			 *
+			 * The CTE flag is only supported if the HCCPARAMS2 CTC
+			 * flag is set, otherwise, the compliance substate is
+			 * automatically entered as on 1.0 and prior.
+			 */
+			if (link_state == USB_SS_PORT_LS_COMP_MOD) {
+				if (!HCC2_CTC(xhci->hcc_params2)) {
+					xhci_dbg(xhci, "CTC flag is 0, port already supports entering compliance mode\n");
+					break;
+				}
+
+				if ((temp & PORT_CONNECT)) {
+					xhci_warn(xhci, "Can't set compliance mode when port is connected\n");
+					goto error;
+				}
+
+				xhci_dbg(xhci, "Enable compliance mode transition for port %d-%d\n",
+					 hcd->self.busnum, wIndex + 1);
+				xhci_set_link_state(xhci, ports[wIndex],
+						link_state);
+
+				temp = readl(ports[wIndex]->addr);
+				break;
+			}
+			/* Port must be enabled */
+			if (!(temp & PORT_PE)) {
+				retval = -ENODEV;
+				break;
+			}
+			/* Can't set port link state above '3' (U3) */
+			if (link_state > USB_SS_PORT_LS_U3) {
+				xhci_warn(xhci, "Cannot set port %d-%d link state %d\n",
+					  hcd->self.busnum, wIndex + 1,
+					  link_state);
+				goto error;
+			}
+
+			/*
+			 * set link to U0, steps depend on current link state.
+			 * U3: set link to U0 and wait for u3exit completion.
+			 * U1/U2:  no PLC complete event, only set link to U0.
+			 * Resume/Recovery: device initiated U0, only wait for
+			 * completion
+			 */
+			if (link_state == USB_SS_PORT_LS_U0) {
+				u32 pls = temp & PORT_PLS_MASK;
+				bool wait_u0 = false;
+
+				/* already in U0 */
+				if (pls == XDEV_U0)
+					break;
+				if (pls == XDEV_U3 ||
+				    pls == XDEV_RESUME ||
+				    pls == XDEV_RECOVERY) {
+					wait_u0 = true;
+					reinit_completion(&bus_state->u3exit_done[wIndex]);
+				}
+				if (pls <= XDEV_U3) /* U1, U2, U3 */
+					xhci_set_link_state(xhci, ports[wIndex],
+							    USB_SS_PORT_LS_U0);
+				if (!wait_u0) {
+					if (pls > XDEV_U3)
+						goto error;
+					break;
+				}
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				if (!wait_for_completion_timeout(&bus_state->u3exit_done[wIndex],
+								 msecs_to_jiffies(500)))
+					xhci_dbg(xhci, "missing U0 port change event for port %d-%d\n",
+						 hcd->self.busnum, wIndex + 1);
+				spin_lock_irqsave(&xhci->lock, flags);
+				temp = readl(ports[wIndex]->addr);
+				break;
+			}
+
+			if (link_state == USB_SS_PORT_LS_U3) {
+				int retries = 16;
+				slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+						wIndex + 1);
+				if (slot_id) {
+					/* unlock to execute stop endpoint
+					 * commands */
+					spin_unlock_irqrestore(&xhci->lock,
+								flags);
+					xhci_stop_device(xhci, slot_id, 1);
+					spin_lock_irqsave(&xhci->lock, flags);
+				}
+				xhci_set_link_state(xhci, ports[wIndex], USB_SS_PORT_LS_U3);
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				while (retries--) {
+					usleep_range(4000, 8000);
+					temp = readl(ports[wIndex]->addr);
+					if ((temp & PORT_PLS_MASK) == XDEV_U3)
+						break;
+				}
+				spin_lock_irqsave(&xhci->lock, flags);
+				temp = readl(ports[wIndex]->addr);
+				bus_state->suspended_ports |= 1 << wIndex;
+			}
+			break;
+		case USB_PORT_FEAT_POWER:
+			/*
+			 * Turn on ports, even if there isn't per-port switching.
+			 * HC will report connect events even before this is set.
+			 * However, hub_wq will ignore the roothub events until
+			 * the roothub is registered.
+			 */
+			xhci_set_port_power(xhci, hcd, wIndex, true, &flags);
+			break;
+		case USB_PORT_FEAT_RESET:
+			temp = (temp | PORT_RESET);
+			writel(temp, ports[wIndex]->addr);
+
+			temp = readl(ports[wIndex]->addr);
+			xhci_dbg(xhci, "set port reset, actual port %d-%d status  = 0x%x\n",
+				 hcd->self.busnum, wIndex + 1, temp);
+			break;
+		case USB_PORT_FEAT_REMOTE_WAKE_MASK:
+			xhci_set_remote_wake_mask(xhci, ports[wIndex],
+						  wake_mask);
+			temp = readl(ports[wIndex]->addr);
+			xhci_dbg(xhci, "set port remote wake mask, actual port %d-%d status  = 0x%x\n",
+				 hcd->self.busnum, wIndex + 1, temp);
+			break;
+		case USB_PORT_FEAT_BH_PORT_RESET:
+			temp |= PORT_WR;
+			writel(temp, ports[wIndex]->addr);
+			temp = readl(ports[wIndex]->addr);
+			break;
+		case USB_PORT_FEAT_U1_TIMEOUT:
+			if (hcd->speed < HCD_USB3)
+				goto error;
+			temp = readl(ports[wIndex]->addr + PORTPMSC);
+			temp &= ~PORT_U1_TIMEOUT_MASK;
+			temp |= PORT_U1_TIMEOUT(timeout);
+			writel(temp, ports[wIndex]->addr + PORTPMSC);
+			break;
+		case USB_PORT_FEAT_U2_TIMEOUT:
+			if (hcd->speed < HCD_USB3)
+				goto error;
+			temp = readl(ports[wIndex]->addr + PORTPMSC);
+			temp &= ~PORT_U2_TIMEOUT_MASK;
+			temp |= PORT_U2_TIMEOUT(timeout);
+			writel(temp, ports[wIndex]->addr + PORTPMSC);
+			break;
+		case USB_PORT_FEAT_TEST:
+			/* 4.19.6 Port Test Modes (USB2 Test Mode) */
+			if (hcd->speed != HCD_USB2)
+				goto error;
+			if (test_mode > USB_TEST_FORCE_ENABLE ||
+			    test_mode < USB_TEST_J)
+				goto error;
+			retval = xhci_enter_test_mode(xhci, test_mode, wIndex,
+						      &flags);
+			break;
+		default:
+			goto error;
+		}
+		/* unblock any posted writes */
+		temp = readl(ports[wIndex]->addr);
+		break;
+	case ClearPortFeature:
+		if (!wIndex || wIndex > max_ports)
+			goto error;
+		wIndex--;
+		temp = readl(ports[wIndex]->addr);
+		if (temp == ~(u32)0) {
+			xhci_hc_died(xhci);
+			retval = -ENODEV;
+			break;
+		}
+		/* FIXME: What new port features do we need to support? */
+		temp = xhci_port_state_to_neutral(temp);
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			temp = readl(ports[wIndex]->addr);
+			xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
+			xhci_dbg(xhci, "PORTSC %04x\n", temp);
+			if (temp & PORT_RESET)
+				goto error;
+			if ((temp & PORT_PLS_MASK) == XDEV_U3) {
+				if ((temp & PORT_PE) == 0)
+					goto error;
+
+				set_bit(wIndex, &bus_state->resuming_ports);
+				usb_hcd_start_port_resume(&hcd->self, wIndex);
+				xhci_set_link_state(xhci, ports[wIndex],
+						    XDEV_RESUME);
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				msleep(USB_RESUME_TIMEOUT);
+				spin_lock_irqsave(&xhci->lock, flags);
+				xhci_set_link_state(xhci, ports[wIndex],
+							XDEV_U0);
+				clear_bit(wIndex, &bus_state->resuming_ports);
+				usb_hcd_end_port_resume(&hcd->self, wIndex);
+			}
+			bus_state->port_c_suspend |= 1 << wIndex;
+
+			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+					wIndex + 1);
+			if (!slot_id) {
+				xhci_dbg(xhci, "slot_id is zero\n");
+				goto error;
+			}
+			xhci_ring_device(xhci, slot_id);
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			bus_state->port_c_suspend &= ~(1 << wIndex);
+			fallthrough;
+		case USB_PORT_FEAT_C_RESET:
+		case USB_PORT_FEAT_C_BH_PORT_RESET:
+		case USB_PORT_FEAT_C_CONNECTION:
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_PORT_LINK_STATE:
+		case USB_PORT_FEAT_C_PORT_CONFIG_ERROR:
+			xhci_clear_port_change_bit(xhci, wValue, wIndex,
+					ports[wIndex]->addr, temp);
+			break;
+		case USB_PORT_FEAT_ENABLE:
+			xhci_disable_port(hcd, xhci, wIndex,
+					ports[wIndex]->addr, temp);
+			break;
+		case USB_PORT_FEAT_POWER:
+			xhci_set_port_power(xhci, hcd, wIndex, false, &flags);
+			break;
+		case USB_PORT_FEAT_TEST:
+			retval = xhci_exit_test_mode(xhci);
+			break;
+		default:
+			goto error;
+		}
+		break;
+	default:
+error:
+		/* "stall" on error */
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return retval;
+}
+
+/*
+ * Returns 0 if the status hasn't changed, or the number of bytes in buf.
+ * Ports are 0-indexed from the HCD point of view,
+ * and 1-indexed from the USB core pointer of view.
+ *
+ * Note that the status change bits will be cleared as soon as a port status
+ * change event is generated, so we use the saved status from that event.
+ */
+int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	unsigned long flags;
+	u32 temp, status;
+	u32 mask;
+	int i, retval;
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int max_ports;
+	struct xhci_bus_state *bus_state;
+	bool reset_change = false;
+	struct xhci_hub *rhub;
+	struct xhci_port **ports;
+
+	rhub = xhci_get_rhub(hcd);
+	ports = rhub->ports;
+	max_ports = rhub->num_ports;
+	bus_state = &rhub->bus_state;
+
+	/* Initial status is no changes */
+	retval = (max_ports + 8) / 8;
+	memset(buf, 0, retval);
+
+	/*
+	 * Inform the usbcore about resume-in-progress by returning
+	 * a non-zero value even if there are no status changes.
+	 */
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	status = bus_state->resuming_ports;
+
+	/*
+	 * SS devices are only visible to roothub after link training completes.
+	 * Keep polling roothubs for a grace period after xHC start
+	 */
+	if (xhci->run_graceperiod) {
+		if (time_before(jiffies, xhci->run_graceperiod))
+			status = 1;
+		else
+			xhci->run_graceperiod = 0;
+	}
+
+	mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC;
+
+	/* For each port, did anything change?  If so, set that bit in buf. */
+	for (i = 0; i < max_ports; i++) {
+		temp = readl(ports[i]->addr);
+		if (temp == ~(u32)0) {
+			xhci_hc_died(xhci);
+			retval = -ENODEV;
+			break;
+		}
+		trace_xhci_hub_status_data(i, temp);
+
+		if ((temp & mask) != 0 ||
+			(bus_state->port_c_suspend & 1 << i) ||
+			(bus_state->resume_done[i] && time_after_eq(
+			    jiffies, bus_state->resume_done[i]))) {
+			buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
+			status = 1;
+		}
+		if ((temp & PORT_RC))
+			reset_change = true;
+		if (temp & PORT_OC)
+			status = 1;
+	}
+	if (!status && !reset_change) {
+		xhci_dbg(xhci, "%s: stopping usb%d port polling\n",
+			 __func__, hcd->self.busnum);
+		clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return status ? retval : 0;
+}
+
+#ifdef CONFIG_PM
+
+int xhci_bus_suspend(struct usb_hcd *hcd)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int max_ports, port_index;
+	struct xhci_bus_state *bus_state;
+	unsigned long flags;
+	struct xhci_hub *rhub;
+	struct xhci_port **ports;
+	u32 portsc_buf[USB_MAXCHILDREN];
+	bool wake_enabled;
+
+	rhub = xhci_get_rhub(hcd);
+	ports = rhub->ports;
+	max_ports = rhub->num_ports;
+	bus_state = &rhub->bus_state;
+	wake_enabled = hcd->self.root_hub->do_remote_wakeup;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	if (wake_enabled) {
+		if (bus_state->resuming_ports ||	/* USB2 */
+		    bus_state->port_remote_wakeup) {	/* USB3 */
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_dbg(xhci, "usb%d bus suspend to fail because a port is resuming\n",
+				 hcd->self.busnum);
+			return -EBUSY;
+		}
+	}
+	/*
+	 * Prepare ports for suspend, but don't write anything before all ports
+	 * are checked and we know bus suspend can proceed
+	 */
+	bus_state->bus_suspended = 0;
+	port_index = max_ports;
+	while (port_index--) {
+		u32 t1, t2;
+		int retries = 10;
+retry:
+		t1 = readl(ports[port_index]->addr);
+		t2 = xhci_port_state_to_neutral(t1);
+		portsc_buf[port_index] = 0;
+
+		/*
+		 * Give a USB3 port in link training time to finish, but don't
+		 * prevent suspend as port might be stuck
+		 */
+		if ((hcd->speed >= HCD_USB3) && retries-- &&
+		    (t1 & PORT_PLS_MASK) == XDEV_POLLING) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			msleep(XHCI_PORT_POLLING_LFPS_TIME);
+			spin_lock_irqsave(&xhci->lock, flags);
+			xhci_dbg(xhci, "port %d-%d polling in bus suspend, waiting\n",
+				 hcd->self.busnum, port_index + 1);
+			goto retry;
+		}
+		/* bail out if port detected a over-current condition */
+		if (t1 & PORT_OC) {
+			bus_state->bus_suspended = 0;
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_dbg(xhci, "Bus suspend bailout, port over-current detected\n");
+			return -EBUSY;
+		}
+		/* suspend ports in U0, or bail out for new connect changes */
+		if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) {
+			if ((t1 & PORT_CSC) && wake_enabled) {
+				bus_state->bus_suspended = 0;
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				xhci_dbg(xhci, "Bus suspend bailout, port connect change\n");
+				return -EBUSY;
+			}
+			xhci_dbg(xhci, "port %d-%d not suspended\n",
+				 hcd->self.busnum, port_index + 1);
+			t2 &= ~PORT_PLS_MASK;
+			t2 |= PORT_LINK_STROBE | XDEV_U3;
+			set_bit(port_index, &bus_state->bus_suspended);
+		}
+		/* USB core sets remote wake mask for USB 3.0 hubs,
+		 * including the USB 3.0 roothub, but only if CONFIG_PM
+		 * is enabled, so also enable remote wake here.
+		 */
+		if (wake_enabled) {
+			if (t1 & PORT_CONNECT) {
+				t2 |= PORT_WKOC_E | PORT_WKDISC_E;
+				t2 &= ~PORT_WKCONN_E;
+			} else {
+				t2 |= PORT_WKOC_E | PORT_WKCONN_E;
+				t2 &= ~PORT_WKDISC_E;
+			}
+
+			if ((xhci->quirks & XHCI_U2_DISABLE_WAKE) &&
+			    (hcd->speed < HCD_USB3)) {
+				if (usb_amd_pt_check_port(hcd->self.controller,
+							  port_index))
+					t2 &= ~PORT_WAKE_BITS;
+			}
+		} else
+			t2 &= ~PORT_WAKE_BITS;
+
+		t1 = xhci_port_state_to_neutral(t1);
+		if (t1 != t2)
+			portsc_buf[port_index] = t2;
+	}
+
+	/* write port settings, stopping and suspending ports if needed */
+	port_index = max_ports;
+	while (port_index--) {
+		if (!portsc_buf[port_index])
+			continue;
+		if (test_bit(port_index, &bus_state->bus_suspended)) {
+			int slot_id;
+
+			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+							    port_index + 1);
+			if (slot_id) {
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				xhci_stop_device(xhci, slot_id, 1);
+				spin_lock_irqsave(&xhci->lock, flags);
+			}
+		}
+		writel(portsc_buf[port_index], ports[port_index]->addr);
+	}
+	hcd->state = HC_STATE_SUSPENDED;
+	bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	if (bus_state->bus_suspended)
+		usleep_range(5000, 10000);
+
+	return 0;
+}
+
+/*
+ * Workaround for missing Cold Attach Status (CAS) if device re-plugged in S3.
+ * warm reset a USB3 device stuck in polling or compliance mode after resume.
+ * See Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8
+ */
+static bool xhci_port_missing_cas_quirk(struct xhci_port *port)
+{
+	u32 portsc;
+
+	portsc = readl(port->addr);
+
+	/* if any of these are set we are not stuck */
+	if (portsc & (PORT_CONNECT | PORT_CAS))
+		return false;
+
+	if (((portsc & PORT_PLS_MASK) != XDEV_POLLING) &&
+	    ((portsc & PORT_PLS_MASK) != XDEV_COMP_MODE))
+		return false;
+
+	/* clear wakeup/change bits, and do a warm port reset */
+	portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
+	portsc |= PORT_WR;
+	writel(portsc, port->addr);
+	/* flush write */
+	readl(port->addr);
+	return true;
+}
+
+int xhci_bus_resume(struct usb_hcd *hcd)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct xhci_bus_state *bus_state;
+	unsigned long flags;
+	int max_ports, port_index;
+	int slot_id;
+	int sret;
+	u32 next_state;
+	u32 temp, portsc;
+	struct xhci_hub *rhub;
+	struct xhci_port **ports;
+
+	rhub = xhci_get_rhub(hcd);
+	ports = rhub->ports;
+	max_ports = rhub->num_ports;
+	bus_state = &rhub->bus_state;
+
+	if (time_before(jiffies, bus_state->next_statechange))
+		msleep(5);
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (!HCD_HW_ACCESSIBLE(hcd)) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	/* delay the irqs */
+	temp = readl(&xhci->op_regs->command);
+	temp &= ~CMD_EIE;
+	writel(temp, &xhci->op_regs->command);
+
+	/* bus specific resume for ports we suspended at bus_suspend */
+	if (hcd->speed >= HCD_USB3)
+		next_state = XDEV_U0;
+	else
+		next_state = XDEV_RESUME;
+
+	port_index = max_ports;
+	while (port_index--) {
+		portsc = readl(ports[port_index]->addr);
+
+		/* warm reset CAS limited ports stuck in polling/compliance */
+		if ((xhci->quirks & XHCI_MISSING_CAS) &&
+		    (hcd->speed >= HCD_USB3) &&
+		    xhci_port_missing_cas_quirk(ports[port_index])) {
+			xhci_dbg(xhci, "reset stuck port %d-%d\n",
+				 hcd->self.busnum, port_index + 1);
+			clear_bit(port_index, &bus_state->bus_suspended);
+			continue;
+		}
+		/* resume if we suspended the link, and it is still suspended */
+		if (test_bit(port_index, &bus_state->bus_suspended))
+			switch (portsc & PORT_PLS_MASK) {
+			case XDEV_U3:
+				portsc = xhci_port_state_to_neutral(portsc);
+				portsc &= ~PORT_PLS_MASK;
+				portsc |= PORT_LINK_STROBE | next_state;
+				break;
+			case XDEV_RESUME:
+				/* resume already initiated */
+				break;
+			default:
+				/* not in a resumeable state, ignore it */
+				clear_bit(port_index,
+					  &bus_state->bus_suspended);
+				break;
+			}
+		/* disable wake for all ports, write new link state if needed */
+		portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
+		writel(portsc, ports[port_index]->addr);
+	}
+
+	/* USB2 specific resume signaling delay and U0 link state transition */
+	if (hcd->speed < HCD_USB3) {
+		if (bus_state->bus_suspended) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			msleep(USB_RESUME_TIMEOUT);
+			spin_lock_irqsave(&xhci->lock, flags);
+		}
+		for_each_set_bit(port_index, &bus_state->bus_suspended,
+				 BITS_PER_LONG) {
+			/* Clear PLC to poll it later for U0 transition */
+			xhci_test_and_clear_bit(xhci, ports[port_index],
+						PORT_PLC);
+			xhci_set_link_state(xhci, ports[port_index], XDEV_U0);
+		}
+	}
+
+	/* poll for U0 link state complete, both USB2 and USB3 */
+	for_each_set_bit(port_index, &bus_state->bus_suspended, BITS_PER_LONG) {
+		sret = xhci_handshake(ports[port_index]->addr, PORT_PLC,
+				      PORT_PLC, 10 * 1000);
+		if (sret) {
+			xhci_warn(xhci, "port %d-%d resume PLC timeout\n",
+				  hcd->self.busnum, port_index + 1);
+			continue;
+		}
+		xhci_test_and_clear_bit(xhci, ports[port_index], PORT_PLC);
+		slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1);
+		if (slot_id)
+			xhci_ring_device(xhci, slot_id);
+	}
+	(void) readl(&xhci->op_regs->command);
+
+	bus_state->next_statechange = jiffies + msecs_to_jiffies(5);
+	/* re-enable irqs */
+	temp = readl(&xhci->op_regs->command);
+	temp |= CMD_EIE;
+	writel(temp, &xhci->op_regs->command);
+	temp = readl(&xhci->op_regs->command);
+
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return 0;
+}
+
+unsigned long xhci_get_resuming_ports(struct usb_hcd *hcd)
+{
+	struct xhci_hub *rhub = xhci_get_rhub(hcd);
+
+	/* USB3 port wakeups are reported via usb_wakeup_notification() */
+	return rhub->bus_state.resuming_ports;	/* USB2 ports only */
+}
+
+#endif	/* CONFIG_PM */
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
new file mode 100644
index 000000000..019dcbe55
--- /dev/null
+++ b/drivers/usb/host/xhci-mem.c
@@ -0,0 +1,2600 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ */
+
+#include <linux/usb.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
+
+#include "xhci.h"
+#include "xhci-trace.h"
+#include "xhci-debugfs.h"
+
+/*
+ * Allocates a generic ring segment from the ring pool, sets the dma address,
+ * initializes the segment to zero, and sets the private next pointer to NULL.
+ *
+ * Section 4.11.1.1:
+ * "All components of all Command and Transfer TRBs shall be initialized to '0'"
+ */
+static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci,
+					       unsigned int cycle_state,
+					       unsigned int max_packet,
+					       gfp_t flags)
+{
+	struct xhci_segment *seg;
+	dma_addr_t	dma;
+	int		i;
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+
+	seg = kzalloc_node(sizeof(*seg), flags, dev_to_node(dev));
+	if (!seg)
+		return NULL;
+
+	seg->trbs = dma_pool_zalloc(xhci->segment_pool, flags, &dma);
+	if (!seg->trbs) {
+		kfree(seg);
+		return NULL;
+	}
+
+	if (max_packet) {
+		seg->bounce_buf = kzalloc_node(max_packet, flags,
+					dev_to_node(dev));
+		if (!seg->bounce_buf) {
+			dma_pool_free(xhci->segment_pool, seg->trbs, dma);
+			kfree(seg);
+			return NULL;
+		}
+	}
+	/* If the cycle state is 0, set the cycle bit to 1 for all the TRBs */
+	if (cycle_state == 0) {
+		for (i = 0; i < TRBS_PER_SEGMENT; i++)
+			seg->trbs[i].link.control = cpu_to_le32(TRB_CYCLE);
+	}
+	seg->dma = dma;
+	seg->next = NULL;
+
+	return seg;
+}
+
+static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
+{
+	if (seg->trbs) {
+		dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
+		seg->trbs = NULL;
+	}
+	kfree(seg->bounce_buf);
+	kfree(seg);
+}
+
+static void xhci_free_segments_for_ring(struct xhci_hcd *xhci,
+				struct xhci_segment *first)
+{
+	struct xhci_segment *seg;
+
+	seg = first->next;
+	while (seg != first) {
+		struct xhci_segment *next = seg->next;
+		xhci_segment_free(xhci, seg);
+		seg = next;
+	}
+	xhci_segment_free(xhci, first);
+}
+
+/*
+ * Make the prev segment point to the next segment.
+ *
+ * Change the last TRB in the prev segment to be a Link TRB which points to the
+ * DMA address of the next segment.  The caller needs to set any Link TRB
+ * related flags, such as End TRB, Toggle Cycle, and no snoop.
+ */
+static void xhci_link_segments(struct xhci_segment *prev,
+			       struct xhci_segment *next,
+			       enum xhci_ring_type type, bool chain_links)
+{
+	u32 val;
+
+	if (!prev || !next)
+		return;
+	prev->next = next;
+	if (type != TYPE_EVENT) {
+		prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr =
+			cpu_to_le64(next->dma);
+
+		/* Set the last TRB in the segment to have a TRB type ID of Link TRB */
+		val = le32_to_cpu(prev->trbs[TRBS_PER_SEGMENT-1].link.control);
+		val &= ~TRB_TYPE_BITMASK;
+		val |= TRB_TYPE(TRB_LINK);
+		if (chain_links)
+			val |= TRB_CHAIN;
+		prev->trbs[TRBS_PER_SEGMENT-1].link.control = cpu_to_le32(val);
+	}
+}
+
+/*
+ * Link the ring to the new segments.
+ * Set Toggle Cycle for the new ring if needed.
+ */
+static void xhci_link_rings(struct xhci_hcd *xhci, struct xhci_ring *ring,
+		struct xhci_segment *first, struct xhci_segment *last,
+		unsigned int num_segs)
+{
+	struct xhci_segment *next;
+	bool chain_links;
+
+	if (!ring || !first || !last)
+		return;
+
+	/* Set chain bit for 0.95 hosts, and for isoc rings on AMD 0.96 host */
+	chain_links = !!(xhci_link_trb_quirk(xhci) ||
+			 (ring->type == TYPE_ISOC &&
+			  (xhci->quirks & XHCI_AMD_0x96_HOST)));
+
+	next = ring->enq_seg->next;
+	xhci_link_segments(ring->enq_seg, first, ring->type, chain_links);
+	xhci_link_segments(last, next, ring->type, chain_links);
+	ring->num_segs += num_segs;
+	ring->num_trbs_free += (TRBS_PER_SEGMENT - 1) * num_segs;
+
+	if (ring->type != TYPE_EVENT && ring->enq_seg == ring->last_seg) {
+		ring->last_seg->trbs[TRBS_PER_SEGMENT-1].link.control
+			&= ~cpu_to_le32(LINK_TOGGLE);
+		last->trbs[TRBS_PER_SEGMENT-1].link.control
+			|= cpu_to_le32(LINK_TOGGLE);
+		ring->last_seg = last;
+	}
+}
+
+/*
+ * We need a radix tree for mapping physical addresses of TRBs to which stream
+ * ID they belong to.  We need to do this because the host controller won't tell
+ * us which stream ring the TRB came from.  We could store the stream ID in an
+ * event data TRB, but that doesn't help us for the cancellation case, since the
+ * endpoint may stop before it reaches that event data TRB.
+ *
+ * The radix tree maps the upper portion of the TRB DMA address to a ring
+ * segment that has the same upper portion of DMA addresses.  For example, say I
+ * have segments of size 1KB, that are always 1KB aligned.  A segment may
+ * start at 0x10c91000 and end at 0x10c913f0.  If I use the upper 10 bits, the
+ * key to the stream ID is 0x43244.  I can use the DMA address of the TRB to
+ * pass the radix tree a key to get the right stream ID:
+ *
+ *	0x10c90fff >> 10 = 0x43243
+ *	0x10c912c0 >> 10 = 0x43244
+ *	0x10c91400 >> 10 = 0x43245
+ *
+ * Obviously, only those TRBs with DMA addresses that are within the segment
+ * will make the radix tree return the stream ID for that ring.
+ *
+ * Caveats for the radix tree:
+ *
+ * The radix tree uses an unsigned long as a key pair.  On 32-bit systems, an
+ * unsigned long will be 32-bits; on a 64-bit system an unsigned long will be
+ * 64-bits.  Since we only request 32-bit DMA addresses, we can use that as the
+ * key on 32-bit or 64-bit systems (it would also be fine if we asked for 64-bit
+ * PCI DMA addresses on a 64-bit system).  There might be a problem on 32-bit
+ * extended systems (where the DMA address can be bigger than 32-bits),
+ * if we allow the PCI dma mask to be bigger than 32-bits.  So don't do that.
+ */
+static int xhci_insert_segment_mapping(struct radix_tree_root *trb_address_map,
+		struct xhci_ring *ring,
+		struct xhci_segment *seg,
+		gfp_t mem_flags)
+{
+	unsigned long key;
+	int ret;
+
+	key = (unsigned long)(seg->dma >> TRB_SEGMENT_SHIFT);
+	/* Skip any segments that were already added. */
+	if (radix_tree_lookup(trb_address_map, key))
+		return 0;
+
+	ret = radix_tree_maybe_preload(mem_flags);
+	if (ret)
+		return ret;
+	ret = radix_tree_insert(trb_address_map,
+			key, ring);
+	radix_tree_preload_end();
+	return ret;
+}
+
+static void xhci_remove_segment_mapping(struct radix_tree_root *trb_address_map,
+		struct xhci_segment *seg)
+{
+	unsigned long key;
+
+	key = (unsigned long)(seg->dma >> TRB_SEGMENT_SHIFT);
+	if (radix_tree_lookup(trb_address_map, key))
+		radix_tree_delete(trb_address_map, key);
+}
+
+static int xhci_update_stream_segment_mapping(
+		struct radix_tree_root *trb_address_map,
+		struct xhci_ring *ring,
+		struct xhci_segment *first_seg,
+		struct xhci_segment *last_seg,
+		gfp_t mem_flags)
+{
+	struct xhci_segment *seg;
+	struct xhci_segment *failed_seg;
+	int ret;
+
+	if (WARN_ON_ONCE(trb_address_map == NULL))
+		return 0;
+
+	seg = first_seg;
+	do {
+		ret = xhci_insert_segment_mapping(trb_address_map,
+				ring, seg, mem_flags);
+		if (ret)
+			goto remove_streams;
+		if (seg == last_seg)
+			return 0;
+		seg = seg->next;
+	} while (seg != first_seg);
+
+	return 0;
+
+remove_streams:
+	failed_seg = seg;
+	seg = first_seg;
+	do {
+		xhci_remove_segment_mapping(trb_address_map, seg);
+		if (seg == failed_seg)
+			return ret;
+		seg = seg->next;
+	} while (seg != first_seg);
+
+	return ret;
+}
+
+static void xhci_remove_stream_mapping(struct xhci_ring *ring)
+{
+	struct xhci_segment *seg;
+
+	if (WARN_ON_ONCE(ring->trb_address_map == NULL))
+		return;
+
+	seg = ring->first_seg;
+	do {
+		xhci_remove_segment_mapping(ring->trb_address_map, seg);
+		seg = seg->next;
+	} while (seg != ring->first_seg);
+}
+
+static int xhci_update_stream_mapping(struct xhci_ring *ring, gfp_t mem_flags)
+{
+	return xhci_update_stream_segment_mapping(ring->trb_address_map, ring,
+			ring->first_seg, ring->last_seg, mem_flags);
+}
+
+/* XXX: Do we need the hcd structure in all these functions? */
+void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring)
+{
+	if (!ring)
+		return;
+
+	trace_xhci_ring_free(ring);
+
+	if (ring->first_seg) {
+		if (ring->type == TYPE_STREAM)
+			xhci_remove_stream_mapping(ring);
+		xhci_free_segments_for_ring(xhci, ring->first_seg);
+	}
+
+	kfree(ring);
+}
+
+void xhci_initialize_ring_info(struct xhci_ring *ring,
+			       unsigned int cycle_state)
+{
+	/* The ring is empty, so the enqueue pointer == dequeue pointer */
+	ring->enqueue = ring->first_seg->trbs;
+	ring->enq_seg = ring->first_seg;
+	ring->dequeue = ring->enqueue;
+	ring->deq_seg = ring->first_seg;
+	/* The ring is initialized to 0. The producer must write 1 to the cycle
+	 * bit to handover ownership of the TRB, so PCS = 1.  The consumer must
+	 * compare CCS to the cycle bit to check ownership, so CCS = 1.
+	 *
+	 * New rings are initialized with cycle state equal to 1; if we are
+	 * handling ring expansion, set the cycle state equal to the old ring.
+	 */
+	ring->cycle_state = cycle_state;
+
+	/*
+	 * Each segment has a link TRB, and leave an extra TRB for SW
+	 * accounting purpose
+	 */
+	ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1;
+}
+
+/* Allocate segments and link them for a ring */
+static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci,
+		struct xhci_segment **first, struct xhci_segment **last,
+		unsigned int num_segs, unsigned int cycle_state,
+		enum xhci_ring_type type, unsigned int max_packet, gfp_t flags)
+{
+	struct xhci_segment *prev;
+	bool chain_links;
+
+	/* Set chain bit for 0.95 hosts, and for isoc rings on AMD 0.96 host */
+	chain_links = !!(xhci_link_trb_quirk(xhci) ||
+			 (type == TYPE_ISOC &&
+			  (xhci->quirks & XHCI_AMD_0x96_HOST)));
+
+	prev = xhci_segment_alloc(xhci, cycle_state, max_packet, flags);
+	if (!prev)
+		return -ENOMEM;
+	num_segs--;
+
+	*first = prev;
+	while (num_segs > 0) {
+		struct xhci_segment	*next;
+
+		next = xhci_segment_alloc(xhci, cycle_state, max_packet, flags);
+		if (!next) {
+			prev = *first;
+			while (prev) {
+				next = prev->next;
+				xhci_segment_free(xhci, prev);
+				prev = next;
+			}
+			return -ENOMEM;
+		}
+		xhci_link_segments(prev, next, type, chain_links);
+
+		prev = next;
+		num_segs--;
+	}
+	xhci_link_segments(prev, *first, type, chain_links);
+	*last = prev;
+
+	return 0;
+}
+
+/*
+ * Create a new ring with zero or more segments.
+ *
+ * Link each segment together into a ring.
+ * Set the end flag and the cycle toggle bit on the last segment.
+ * See section 4.9.1 and figures 15 and 16.
+ */
+struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
+		unsigned int num_segs, unsigned int cycle_state,
+		enum xhci_ring_type type, unsigned int max_packet, gfp_t flags)
+{
+	struct xhci_ring	*ring;
+	int ret;
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+
+	ring = kzalloc_node(sizeof(*ring), flags, dev_to_node(dev));
+	if (!ring)
+		return NULL;
+
+	ring->num_segs = num_segs;
+	ring->bounce_buf_len = max_packet;
+	INIT_LIST_HEAD(&ring->td_list);
+	ring->type = type;
+	if (num_segs == 0)
+		return ring;
+
+	ret = xhci_alloc_segments_for_ring(xhci, &ring->first_seg,
+			&ring->last_seg, num_segs, cycle_state, type,
+			max_packet, flags);
+	if (ret)
+		goto fail;
+
+	/* Only event ring does not use link TRB */
+	if (type != TYPE_EVENT) {
+		/* See section 4.9.2.1 and 6.4.4.1 */
+		ring->last_seg->trbs[TRBS_PER_SEGMENT - 1].link.control |=
+			cpu_to_le32(LINK_TOGGLE);
+	}
+	xhci_initialize_ring_info(ring, cycle_state);
+	trace_xhci_ring_alloc(ring);
+	return ring;
+
+fail:
+	kfree(ring);
+	return NULL;
+}
+
+void xhci_free_endpoint_ring(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		unsigned int ep_index)
+{
+	xhci_ring_free(xhci, virt_dev->eps[ep_index].ring);
+	virt_dev->eps[ep_index].ring = NULL;
+}
+
+/*
+ * Expand an existing ring.
+ * Allocate a new ring which has same segment numbers and link the two rings.
+ */
+int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
+				unsigned int num_trbs, gfp_t flags)
+{
+	struct xhci_segment	*first;
+	struct xhci_segment	*last;
+	unsigned int		num_segs;
+	unsigned int		num_segs_needed;
+	int			ret;
+
+	num_segs_needed = (num_trbs + (TRBS_PER_SEGMENT - 1) - 1) /
+				(TRBS_PER_SEGMENT - 1);
+
+	/* Allocate number of segments we needed, or double the ring size */
+	num_segs = max(ring->num_segs, num_segs_needed);
+
+	ret = xhci_alloc_segments_for_ring(xhci, &first, &last,
+			num_segs, ring->cycle_state, ring->type,
+			ring->bounce_buf_len, flags);
+	if (ret)
+		return -ENOMEM;
+
+	if (ring->type == TYPE_STREAM)
+		ret = xhci_update_stream_segment_mapping(ring->trb_address_map,
+						ring, first, last, flags);
+	if (ret) {
+		struct xhci_segment *next;
+		do {
+			next = first->next;
+			xhci_segment_free(xhci, first);
+			if (first == last)
+				break;
+			first = next;
+		} while (true);
+		return ret;
+	}
+
+	xhci_link_rings(xhci, ring, first, last, num_segs);
+	trace_xhci_ring_expansion(ring);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_ring_expansion,
+			"ring expansion succeed, now has %d segments",
+			ring->num_segs);
+
+	return 0;
+}
+
+struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
+						    int type, gfp_t flags)
+{
+	struct xhci_container_ctx *ctx;
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+
+	if ((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT))
+		return NULL;
+
+	ctx = kzalloc_node(sizeof(*ctx), flags, dev_to_node(dev));
+	if (!ctx)
+		return NULL;
+
+	ctx->type = type;
+	ctx->size = HCC_64BYTE_CONTEXT(xhci->hcc_params) ? 2048 : 1024;
+	if (type == XHCI_CTX_TYPE_INPUT)
+		ctx->size += CTX_SIZE(xhci->hcc_params);
+
+	ctx->bytes = dma_pool_zalloc(xhci->device_pool, flags, &ctx->dma);
+	if (!ctx->bytes) {
+		kfree(ctx);
+		return NULL;
+	}
+	return ctx;
+}
+
+void xhci_free_container_ctx(struct xhci_hcd *xhci,
+			     struct xhci_container_ctx *ctx)
+{
+	if (!ctx)
+		return;
+	dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma);
+	kfree(ctx);
+}
+
+struct xhci_input_control_ctx *xhci_get_input_control_ctx(
+					      struct xhci_container_ctx *ctx)
+{
+	if (ctx->type != XHCI_CTX_TYPE_INPUT)
+		return NULL;
+
+	return (struct xhci_input_control_ctx *)ctx->bytes;
+}
+
+struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci,
+					struct xhci_container_ctx *ctx)
+{
+	if (ctx->type == XHCI_CTX_TYPE_DEVICE)
+		return (struct xhci_slot_ctx *)ctx->bytes;
+
+	return (struct xhci_slot_ctx *)
+		(ctx->bytes + CTX_SIZE(xhci->hcc_params));
+}
+
+struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci,
+				    struct xhci_container_ctx *ctx,
+				    unsigned int ep_index)
+{
+	/* increment ep index by offset of start of ep ctx array */
+	ep_index++;
+	if (ctx->type == XHCI_CTX_TYPE_INPUT)
+		ep_index++;
+
+	return (struct xhci_ep_ctx *)
+		(ctx->bytes + (ep_index * CTX_SIZE(xhci->hcc_params)));
+}
+EXPORT_SYMBOL_GPL(xhci_get_ep_ctx);
+
+/***************** Streams structures manipulation *************************/
+
+static void xhci_free_stream_ctx(struct xhci_hcd *xhci,
+		unsigned int num_stream_ctxs,
+		struct xhci_stream_ctx *stream_ctx, dma_addr_t dma)
+{
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+	size_t size = sizeof(struct xhci_stream_ctx) * num_stream_ctxs;
+
+	if (size > MEDIUM_STREAM_ARRAY_SIZE)
+		dma_free_coherent(dev, size,
+				stream_ctx, dma);
+	else if (size <= SMALL_STREAM_ARRAY_SIZE)
+		return dma_pool_free(xhci->small_streams_pool,
+				stream_ctx, dma);
+	else
+		return dma_pool_free(xhci->medium_streams_pool,
+				stream_ctx, dma);
+}
+
+/*
+ * The stream context array for each endpoint with bulk streams enabled can
+ * vary in size, based on:
+ *  - how many streams the endpoint supports,
+ *  - the maximum primary stream array size the host controller supports,
+ *  - and how many streams the device driver asks for.
+ *
+ * The stream context array must be a power of 2, and can be as small as
+ * 64 bytes or as large as 1MB.
+ */
+static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci,
+		unsigned int num_stream_ctxs, dma_addr_t *dma,
+		gfp_t mem_flags)
+{
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+	size_t size = sizeof(struct xhci_stream_ctx) * num_stream_ctxs;
+
+	if (size > MEDIUM_STREAM_ARRAY_SIZE)
+		return dma_alloc_coherent(dev, size,
+				dma, mem_flags);
+	else if (size <= SMALL_STREAM_ARRAY_SIZE)
+		return dma_pool_alloc(xhci->small_streams_pool,
+				mem_flags, dma);
+	else
+		return dma_pool_alloc(xhci->medium_streams_pool,
+				mem_flags, dma);
+}
+
+struct xhci_ring *xhci_dma_to_transfer_ring(
+		struct xhci_virt_ep *ep,
+		u64 address)
+{
+	if (ep->ep_state & EP_HAS_STREAMS)
+		return radix_tree_lookup(&ep->stream_info->trb_address_map,
+				address >> TRB_SEGMENT_SHIFT);
+	return ep->ring;
+}
+
+/*
+ * Change an endpoint's internal structure so it supports stream IDs.  The
+ * number of requested streams includes stream 0, which cannot be used by device
+ * drivers.
+ *
+ * The number of stream contexts in the stream context array may be bigger than
+ * the number of streams the driver wants to use.  This is because the number of
+ * stream context array entries must be a power of two.
+ */
+struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
+		unsigned int num_stream_ctxs,
+		unsigned int num_streams,
+		unsigned int max_packet, gfp_t mem_flags)
+{
+	struct xhci_stream_info *stream_info;
+	u32 cur_stream;
+	struct xhci_ring *cur_ring;
+	u64 addr;
+	int ret;
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+
+	xhci_dbg(xhci, "Allocating %u streams and %u "
+			"stream context array entries.\n",
+			num_streams, num_stream_ctxs);
+	if (xhci->cmd_ring_reserved_trbs == MAX_RSVD_CMD_TRBS) {
+		xhci_dbg(xhci, "Command ring has no reserved TRBs available\n");
+		return NULL;
+	}
+	xhci->cmd_ring_reserved_trbs++;
+
+	stream_info = kzalloc_node(sizeof(*stream_info), mem_flags,
+			dev_to_node(dev));
+	if (!stream_info)
+		goto cleanup_trbs;
+
+	stream_info->num_streams = num_streams;
+	stream_info->num_stream_ctxs = num_stream_ctxs;
+
+	/* Initialize the array of virtual pointers to stream rings. */
+	stream_info->stream_rings = kcalloc_node(
+			num_streams, sizeof(struct xhci_ring *), mem_flags,
+			dev_to_node(dev));
+	if (!stream_info->stream_rings)
+		goto cleanup_info;
+
+	/* Initialize the array of DMA addresses for stream rings for the HW. */
+	stream_info->stream_ctx_array = xhci_alloc_stream_ctx(xhci,
+			num_stream_ctxs, &stream_info->ctx_array_dma,
+			mem_flags);
+	if (!stream_info->stream_ctx_array)
+		goto cleanup_ring_array;
+	memset(stream_info->stream_ctx_array, 0,
+			sizeof(struct xhci_stream_ctx)*num_stream_ctxs);
+
+	/* Allocate everything needed to free the stream rings later */
+	stream_info->free_streams_command =
+		xhci_alloc_command_with_ctx(xhci, true, mem_flags);
+	if (!stream_info->free_streams_command)
+		goto cleanup_ctx;
+
+	INIT_RADIX_TREE(&stream_info->trb_address_map, GFP_ATOMIC);
+
+	/* Allocate rings for all the streams that the driver will use,
+	 * and add their segment DMA addresses to the radix tree.
+	 * Stream 0 is reserved.
+	 */
+
+	for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
+		stream_info->stream_rings[cur_stream] =
+			xhci_ring_alloc(xhci, 2, 1, TYPE_STREAM, max_packet,
+					mem_flags);
+		cur_ring = stream_info->stream_rings[cur_stream];
+		if (!cur_ring)
+			goto cleanup_rings;
+		cur_ring->stream_id = cur_stream;
+		cur_ring->trb_address_map = &stream_info->trb_address_map;
+		/* Set deq ptr, cycle bit, and stream context type */
+		addr = cur_ring->first_seg->dma |
+			SCT_FOR_CTX(SCT_PRI_TR) |
+			cur_ring->cycle_state;
+		stream_info->stream_ctx_array[cur_stream].stream_ring =
+			cpu_to_le64(addr);
+		xhci_dbg(xhci, "Setting stream %d ring ptr to 0x%08llx\n",
+				cur_stream, (unsigned long long) addr);
+
+		ret = xhci_update_stream_mapping(cur_ring, mem_flags);
+		if (ret) {
+			xhci_ring_free(xhci, cur_ring);
+			stream_info->stream_rings[cur_stream] = NULL;
+			goto cleanup_rings;
+		}
+	}
+	/* Leave the other unused stream ring pointers in the stream context
+	 * array initialized to zero.  This will cause the xHC to give us an
+	 * error if the device asks for a stream ID we don't have setup (if it
+	 * was any other way, the host controller would assume the ring is
+	 * "empty" and wait forever for data to be queued to that stream ID).
+	 */
+
+	return stream_info;
+
+cleanup_rings:
+	for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
+		cur_ring = stream_info->stream_rings[cur_stream];
+		if (cur_ring) {
+			xhci_ring_free(xhci, cur_ring);
+			stream_info->stream_rings[cur_stream] = NULL;
+		}
+	}
+	xhci_free_command(xhci, stream_info->free_streams_command);
+cleanup_ctx:
+	xhci_free_stream_ctx(xhci,
+		stream_info->num_stream_ctxs,
+		stream_info->stream_ctx_array,
+		stream_info->ctx_array_dma);
+cleanup_ring_array:
+	kfree(stream_info->stream_rings);
+cleanup_info:
+	kfree(stream_info);
+cleanup_trbs:
+	xhci->cmd_ring_reserved_trbs--;
+	return NULL;
+}
+/*
+ * Sets the MaxPStreams field and the Linear Stream Array field.
+ * Sets the dequeue pointer to the stream context array.
+ */
+void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
+		struct xhci_ep_ctx *ep_ctx,
+		struct xhci_stream_info *stream_info)
+{
+	u32 max_primary_streams;
+	/* MaxPStreams is the number of stream context array entries, not the
+	 * number we're actually using.  Must be in 2^(MaxPstreams + 1) format.
+	 * fls(0) = 0, fls(0x1) = 1, fls(0x10) = 2, fls(0x100) = 3, etc.
+	 */
+	max_primary_streams = fls(stream_info->num_stream_ctxs) - 2;
+	xhci_dbg_trace(xhci,  trace_xhci_dbg_context_change,
+			"Setting number of stream ctx array entries to %u",
+			1 << (max_primary_streams + 1));
+	ep_ctx->ep_info &= cpu_to_le32(~EP_MAXPSTREAMS_MASK);
+	ep_ctx->ep_info |= cpu_to_le32(EP_MAXPSTREAMS(max_primary_streams)
+				       | EP_HAS_LSA);
+	ep_ctx->deq  = cpu_to_le64(stream_info->ctx_array_dma);
+}
+
+/*
+ * Sets the MaxPStreams field and the Linear Stream Array field to 0.
+ * Reinstalls the "normal" endpoint ring (at its previous dequeue mark,
+ * not at the beginning of the ring).
+ */
+void xhci_setup_no_streams_ep_input_ctx(struct xhci_ep_ctx *ep_ctx,
+		struct xhci_virt_ep *ep)
+{
+	dma_addr_t addr;
+	ep_ctx->ep_info &= cpu_to_le32(~(EP_MAXPSTREAMS_MASK | EP_HAS_LSA));
+	addr = xhci_trb_virt_to_dma(ep->ring->deq_seg, ep->ring->dequeue);
+	ep_ctx->deq  = cpu_to_le64(addr | ep->ring->cycle_state);
+}
+
+/* Frees all stream contexts associated with the endpoint,
+ *
+ * Caller should fix the endpoint context streams fields.
+ */
+void xhci_free_stream_info(struct xhci_hcd *xhci,
+		struct xhci_stream_info *stream_info)
+{
+	int cur_stream;
+	struct xhci_ring *cur_ring;
+
+	if (!stream_info)
+		return;
+
+	for (cur_stream = 1; cur_stream < stream_info->num_streams;
+			cur_stream++) {
+		cur_ring = stream_info->stream_rings[cur_stream];
+		if (cur_ring) {
+			xhci_ring_free(xhci, cur_ring);
+			stream_info->stream_rings[cur_stream] = NULL;
+		}
+	}
+	xhci_free_command(xhci, stream_info->free_streams_command);
+	xhci->cmd_ring_reserved_trbs--;
+	if (stream_info->stream_ctx_array)
+		xhci_free_stream_ctx(xhci,
+				stream_info->num_stream_ctxs,
+				stream_info->stream_ctx_array,
+				stream_info->ctx_array_dma);
+
+	kfree(stream_info->stream_rings);
+	kfree(stream_info);
+}
+
+
+/***************** Device context manipulation *************************/
+
+static void xhci_free_tt_info(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int slot_id)
+{
+	struct list_head *tt_list_head;
+	struct xhci_tt_bw_info *tt_info, *next;
+	bool slot_found = false;
+
+	/* If the device never made it past the Set Address stage,
+	 * it may not have the real_port set correctly.
+	 */
+	if (virt_dev->real_port == 0 ||
+			virt_dev->real_port > HCS_MAX_PORTS(xhci->hcs_params1)) {
+		xhci_dbg(xhci, "Bad real port.\n");
+		return;
+	}
+
+	tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts);
+	list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
+		/* Multi-TT hubs will have more than one entry */
+		if (tt_info->slot_id == slot_id) {
+			slot_found = true;
+			list_del(&tt_info->tt_list);
+			kfree(tt_info);
+		} else if (slot_found) {
+			break;
+		}
+	}
+}
+
+int xhci_alloc_tt_info(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		struct usb_device *hdev,
+		struct usb_tt *tt, gfp_t mem_flags)
+{
+	struct xhci_tt_bw_info		*tt_info;
+	unsigned int			num_ports;
+	int				i, j;
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+
+	if (!tt->multi)
+		num_ports = 1;
+	else
+		num_ports = hdev->maxchild;
+
+	for (i = 0; i < num_ports; i++, tt_info++) {
+		struct xhci_interval_bw_table *bw_table;
+
+		tt_info = kzalloc_node(sizeof(*tt_info), mem_flags,
+				dev_to_node(dev));
+		if (!tt_info)
+			goto free_tts;
+		INIT_LIST_HEAD(&tt_info->tt_list);
+		list_add(&tt_info->tt_list,
+				&xhci->rh_bw[virt_dev->real_port - 1].tts);
+		tt_info->slot_id = virt_dev->udev->slot_id;
+		if (tt->multi)
+			tt_info->ttport = i+1;
+		bw_table = &tt_info->bw_table;
+		for (j = 0; j < XHCI_MAX_INTERVAL; j++)
+			INIT_LIST_HEAD(&bw_table->interval_bw[j].endpoints);
+	}
+	return 0;
+
+free_tts:
+	xhci_free_tt_info(xhci, virt_dev, virt_dev->udev->slot_id);
+	return -ENOMEM;
+}
+
+
+/* All the xhci_tds in the ring's TD list should be freed at this point.
+ * Should be called with xhci->lock held if there is any chance the TT lists
+ * will be manipulated by the configure endpoint, allocate device, or update
+ * hub functions while this function is removing the TT entries from the list.
+ */
+void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
+{
+	struct xhci_virt_device *dev;
+	int i;
+	int old_active_eps = 0;
+
+	/* Slot ID 0 is reserved */
+	if (slot_id == 0 || !xhci->devs[slot_id])
+		return;
+
+	dev = xhci->devs[slot_id];
+
+	xhci->dcbaa->dev_context_ptrs[slot_id] = 0;
+	if (!dev)
+		return;
+
+	trace_xhci_free_virt_device(dev);
+
+	if (dev->tt_info)
+		old_active_eps = dev->tt_info->active_eps;
+
+	for (i = 0; i < 31; i++) {
+		if (dev->eps[i].ring)
+			xhci_ring_free(xhci, dev->eps[i].ring);
+		if (dev->eps[i].stream_info)
+			xhci_free_stream_info(xhci,
+					dev->eps[i].stream_info);
+		/*
+		 * Endpoints are normally deleted from the bandwidth list when
+		 * endpoints are dropped, before device is freed.
+		 * If host is dying or being removed then endpoints aren't
+		 * dropped cleanly, so delete the endpoint from list here.
+		 * Only applicable for hosts with software bandwidth checking.
+		 */
+
+		if (!list_empty(&dev->eps[i].bw_endpoint_list)) {
+			list_del_init(&dev->eps[i].bw_endpoint_list);
+			xhci_dbg(xhci, "Slot %u endpoint %u not removed from BW list!\n",
+				 slot_id, i);
+		}
+	}
+	/* If this is a hub, free the TT(s) from the TT list */
+	xhci_free_tt_info(xhci, dev, slot_id);
+	/* If necessary, update the number of active TTs on this root port */
+	xhci_update_tt_active_eps(xhci, dev, old_active_eps);
+
+	if (dev->in_ctx)
+		xhci_free_container_ctx(xhci, dev->in_ctx);
+	if (dev->out_ctx)
+		xhci_free_container_ctx(xhci, dev->out_ctx);
+
+	if (dev->udev && dev->udev->slot_id)
+		dev->udev->slot_id = 0;
+	kfree(xhci->devs[slot_id]);
+	xhci->devs[slot_id] = NULL;
+}
+
+/*
+ * Free a virt_device structure.
+ * If the virt_device added a tt_info (a hub) and has children pointing to
+ * that tt_info, then free the child first. Recursive.
+ * We can't rely on udev at this point to find child-parent relationships.
+ */
+static void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_id)
+{
+	struct xhci_virt_device *vdev;
+	struct list_head *tt_list_head;
+	struct xhci_tt_bw_info *tt_info, *next;
+	int i;
+
+	vdev = xhci->devs[slot_id];
+	if (!vdev)
+		return;
+
+	if (vdev->real_port == 0 ||
+			vdev->real_port > HCS_MAX_PORTS(xhci->hcs_params1)) {
+		xhci_dbg(xhci, "Bad vdev->real_port.\n");
+		goto out;
+	}
+
+	tt_list_head = &(xhci->rh_bw[vdev->real_port - 1].tts);
+	list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
+		/* is this a hub device that added a tt_info to the tts list */
+		if (tt_info->slot_id == slot_id) {
+			/* are any devices using this tt_info? */
+			for (i = 1; i < HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
+				vdev = xhci->devs[i];
+				if (vdev && (vdev->tt_info == tt_info))
+					xhci_free_virt_devices_depth_first(
+						xhci, i);
+			}
+		}
+	}
+out:
+	/* we are now at a leaf device */
+	xhci_debugfs_remove_slot(xhci, slot_id);
+	xhci_free_virt_device(xhci, slot_id);
+}
+
+int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
+		struct usb_device *udev, gfp_t flags)
+{
+	struct xhci_virt_device *dev;
+	int i;
+
+	/* Slot ID 0 is reserved */
+	if (slot_id == 0 || xhci->devs[slot_id]) {
+		xhci_warn(xhci, "Bad Slot ID %d\n", slot_id);
+		return 0;
+	}
+
+	dev = kzalloc(sizeof(*dev), flags);
+	if (!dev)
+		return 0;
+
+	dev->slot_id = slot_id;
+
+	/* Allocate the (output) device context that will be used in the HC. */
+	dev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE, flags);
+	if (!dev->out_ctx)
+		goto fail;
+
+	xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id,
+			(unsigned long long)dev->out_ctx->dma);
+
+	/* Allocate the (input) device context for address device command */
+	dev->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, flags);
+	if (!dev->in_ctx)
+		goto fail;
+
+	xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id,
+			(unsigned long long)dev->in_ctx->dma);
+
+	/* Initialize the cancellation and bandwidth list for each ep */
+	for (i = 0; i < 31; i++) {
+		dev->eps[i].ep_index = i;
+		dev->eps[i].vdev = dev;
+		dev->eps[i].xhci = xhci;
+		INIT_LIST_HEAD(&dev->eps[i].cancelled_td_list);
+		INIT_LIST_HEAD(&dev->eps[i].bw_endpoint_list);
+	}
+
+	/* Allocate endpoint 0 ring */
+	dev->eps[0].ring = xhci_ring_alloc(xhci, 2, 1, TYPE_CTRL, 0, flags);
+	if (!dev->eps[0].ring)
+		goto fail;
+
+	dev->udev = udev;
+
+	/* Point to output device context in dcbaa. */
+	xhci->dcbaa->dev_context_ptrs[slot_id] = cpu_to_le64(dev->out_ctx->dma);
+	xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",
+		 slot_id,
+		 &xhci->dcbaa->dev_context_ptrs[slot_id],
+		 le64_to_cpu(xhci->dcbaa->dev_context_ptrs[slot_id]));
+
+	trace_xhci_alloc_virt_device(dev);
+
+	xhci->devs[slot_id] = dev;
+
+	return 1;
+fail:
+
+	if (dev->in_ctx)
+		xhci_free_container_ctx(xhci, dev->in_ctx);
+	if (dev->out_ctx)
+		xhci_free_container_ctx(xhci, dev->out_ctx);
+	kfree(dev);
+
+	return 0;
+}
+
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+		struct usb_device *udev)
+{
+	struct xhci_virt_device *virt_dev;
+	struct xhci_ep_ctx	*ep0_ctx;
+	struct xhci_ring	*ep_ring;
+
+	virt_dev = xhci->devs[udev->slot_id];
+	ep0_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, 0);
+	ep_ring = virt_dev->eps[0].ring;
+	/*
+	 * FIXME we don't keep track of the dequeue pointer very well after a
+	 * Set TR dequeue pointer, so we're setting the dequeue pointer of the
+	 * host to our enqueue pointer.  This should only be called after a
+	 * configured device has reset, so all control transfers should have
+	 * been completed or cancelled before the reset.
+	 */
+	ep0_ctx->deq = cpu_to_le64(xhci_trb_virt_to_dma(ep_ring->enq_seg,
+							ep_ring->enqueue)
+				   | ep_ring->cycle_state);
+}
+
+/*
+ * The xHCI roothub may have ports of differing speeds in any order in the port
+ * status registers.
+ *
+ * The xHCI hardware wants to know the roothub port number that the USB device
+ * is attached to (or the roothub port its ancestor hub is attached to).  All we
+ * know is the index of that port under either the USB 2.0 or the USB 3.0
+ * roothub, but that doesn't give us the real index into the HW port status
+ * registers. Call xhci_find_raw_port_number() to get real index.
+ */
+static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
+		struct usb_device *udev)
+{
+	struct usb_device *top_dev;
+	struct usb_hcd *hcd;
+
+	if (udev->speed >= USB_SPEED_SUPER)
+		hcd = xhci_get_usb3_hcd(xhci);
+	else
+		hcd = xhci->main_hcd;
+
+	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
+			top_dev = top_dev->parent)
+		/* Found device below root hub */;
+
+	return	xhci_find_raw_port_number(hcd, top_dev->portnum);
+}
+
+/* Setup an xHCI virtual device for a Set Address command */
+int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
+{
+	struct xhci_virt_device *dev;
+	struct xhci_ep_ctx	*ep0_ctx;
+	struct xhci_slot_ctx    *slot_ctx;
+	u32			port_num;
+	u32			max_packets;
+	struct usb_device *top_dev;
+
+	dev = xhci->devs[udev->slot_id];
+	/* Slot ID 0 is reserved */
+	if (udev->slot_id == 0 || !dev) {
+		xhci_warn(xhci, "Slot ID %d is not assigned to this device\n",
+				udev->slot_id);
+		return -EINVAL;
+	}
+	ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0);
+	slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);
+
+	/* 3) Only the control endpoint is valid - one endpoint context */
+	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route);
+	switch (udev->speed) {
+	case USB_SPEED_SUPER_PLUS:
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SSP);
+		max_packets = MAX_PACKET(512);
+		break;
+	case USB_SPEED_SUPER:
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SS);
+		max_packets = MAX_PACKET(512);
+		break;
+	case USB_SPEED_HIGH:
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_HS);
+		max_packets = MAX_PACKET(64);
+		break;
+	/* USB core guesses at a 64-byte max packet first for FS devices */
+	case USB_SPEED_FULL:
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_FS);
+		max_packets = MAX_PACKET(64);
+		break;
+	case USB_SPEED_LOW:
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_LS);
+		max_packets = MAX_PACKET(8);
+		break;
+	case USB_SPEED_WIRELESS:
+		xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
+		return -EINVAL;
+	default:
+		/* Speed was set earlier, this shouldn't happen. */
+		return -EINVAL;
+	}
+	/* Find the root hub port this device is under */
+	port_num = xhci_find_real_port_number(xhci, udev);
+	if (!port_num)
+		return -EINVAL;
+	slot_ctx->dev_info2 |= cpu_to_le32(ROOT_HUB_PORT(port_num));
+	/* Set the port number in the virtual_device to the faked port number */
+	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
+			top_dev = top_dev->parent)
+		/* Found device below root hub */;
+	dev->fake_port = top_dev->portnum;
+	dev->real_port = port_num;
+	xhci_dbg(xhci, "Set root hub portnum to %d\n", port_num);
+	xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->fake_port);
+
+	/* Find the right bandwidth table that this device will be a part of.
+	 * If this is a full speed device attached directly to a root port (or a
+	 * decendent of one), it counts as a primary bandwidth domain, not a
+	 * secondary bandwidth domain under a TT.  An xhci_tt_info structure
+	 * will never be created for the HS root hub.
+	 */
+	if (!udev->tt || !udev->tt->hub->parent) {
+		dev->bw_table = &xhci->rh_bw[port_num - 1].bw_table;
+	} else {
+		struct xhci_root_port_bw_info *rh_bw;
+		struct xhci_tt_bw_info *tt_bw;
+
+		rh_bw = &xhci->rh_bw[port_num - 1];
+		/* Find the right TT. */
+		list_for_each_entry(tt_bw, &rh_bw->tts, tt_list) {
+			if (tt_bw->slot_id != udev->tt->hub->slot_id)
+				continue;
+
+			if (!dev->udev->tt->multi ||
+					(udev->tt->multi &&
+					 tt_bw->ttport == dev->udev->ttport)) {
+				dev->bw_table = &tt_bw->bw_table;
+				dev->tt_info = tt_bw;
+				break;
+			}
+		}
+		if (!dev->tt_info)
+			xhci_warn(xhci, "WARN: Didn't find a matching TT\n");
+	}
+
+	/* Is this a LS/FS device under an external HS hub? */
+	if (udev->tt && udev->tt->hub->parent) {
+		slot_ctx->tt_info = cpu_to_le32(udev->tt->hub->slot_id |
+						(udev->ttport << 8));
+		if (udev->tt->multi)
+			slot_ctx->dev_info |= cpu_to_le32(DEV_MTT);
+	}
+	xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);
+	xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
+
+	/* Step 4 - ring already allocated */
+	/* Step 5 */
+	ep0_ctx->ep_info2 = cpu_to_le32(EP_TYPE(CTRL_EP));
+
+	/* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
+	ep0_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(0) | ERROR_COUNT(3) |
+					 max_packets);
+
+	ep0_ctx->deq = cpu_to_le64(dev->eps[0].ring->first_seg->dma |
+				   dev->eps[0].ring->cycle_state);
+
+	trace_xhci_setup_addressable_virt_device(dev);
+
+	/* Steps 7 and 8 were done in xhci_alloc_virt_device() */
+
+	return 0;
+}
+
+/*
+ * Convert interval expressed as 2^(bInterval - 1) == interval into
+ * straight exponent value 2^n == interval.
+ *
+ */
+static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	unsigned int interval;
+
+	interval = clamp_val(ep->desc.bInterval, 1, 16) - 1;
+	if (interval != ep->desc.bInterval - 1)
+		dev_warn(&udev->dev,
+			 "ep %#x - rounding interval to %d %sframes\n",
+			 ep->desc.bEndpointAddress,
+			 1 << interval,
+			 udev->speed == USB_SPEED_FULL ? "" : "micro");
+
+	if (udev->speed == USB_SPEED_FULL) {
+		/*
+		 * Full speed isoc endpoints specify interval in frames,
+		 * not microframes. We are using microframes everywhere,
+		 * so adjust accordingly.
+		 */
+		interval += 3;	/* 1 frame = 2^3 uframes */
+	}
+
+	return interval;
+}
+
+/*
+ * Convert bInterval expressed in microframes (in 1-255 range) to exponent of
+ * microframes, rounded down to nearest power of 2.
+ */
+static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
+		struct usb_host_endpoint *ep, unsigned int desc_interval,
+		unsigned int min_exponent, unsigned int max_exponent)
+{
+	unsigned int interval;
+
+	interval = fls(desc_interval) - 1;
+	interval = clamp_val(interval, min_exponent, max_exponent);
+	if ((1 << interval) != desc_interval)
+		dev_dbg(&udev->dev,
+			 "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
+			 ep->desc.bEndpointAddress,
+			 1 << interval,
+			 desc_interval);
+
+	return interval;
+}
+
+static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	if (ep->desc.bInterval == 0)
+		return 0;
+	return xhci_microframes_to_exponent(udev, ep,
+			ep->desc.bInterval, 0, 15);
+}
+
+
+static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	return xhci_microframes_to_exponent(udev, ep,
+			ep->desc.bInterval * 8, 3, 10);
+}
+
+/* Return the polling or NAK interval.
+ *
+ * The polling interval is expressed in "microframes".  If xHCI's Interval field
+ * is set to N, it will service the endpoint every 2^(Interval)*125us.
+ *
+ * The NAK interval is one NAK per 1 to 255 microframes, or no NAKs if interval
+ * is set to 0.
+ */
+static unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	unsigned int interval = 0;
+
+	switch (udev->speed) {
+	case USB_SPEED_HIGH:
+		/* Max NAK rate */
+		if (usb_endpoint_xfer_control(&ep->desc) ||
+		    usb_endpoint_xfer_bulk(&ep->desc)) {
+			interval = xhci_parse_microframe_interval(udev, ep);
+			break;
+		}
+		fallthrough;	/* SS and HS isoc/int have same decoding */
+
+	case USB_SPEED_SUPER_PLUS:
+	case USB_SPEED_SUPER:
+		if (usb_endpoint_xfer_int(&ep->desc) ||
+		    usb_endpoint_xfer_isoc(&ep->desc)) {
+			interval = xhci_parse_exponent_interval(udev, ep);
+		}
+		break;
+
+	case USB_SPEED_FULL:
+		if (usb_endpoint_xfer_isoc(&ep->desc)) {
+			interval = xhci_parse_exponent_interval(udev, ep);
+			break;
+		}
+		/*
+		 * Fall through for interrupt endpoint interval decoding
+		 * since it uses the same rules as low speed interrupt
+		 * endpoints.
+		 */
+		fallthrough;
+
+	case USB_SPEED_LOW:
+		if (usb_endpoint_xfer_int(&ep->desc) ||
+		    usb_endpoint_xfer_isoc(&ep->desc)) {
+
+			interval = xhci_parse_frame_interval(udev, ep);
+		}
+		break;
+
+	default:
+		BUG();
+	}
+	return interval;
+}
+
+/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
+ * High speed endpoint descriptors can define "the number of additional
+ * transaction opportunities per microframe", but that goes in the Max Burst
+ * endpoint context field.
+ */
+static u32 xhci_get_endpoint_mult(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	if (udev->speed < USB_SPEED_SUPER ||
+			!usb_endpoint_xfer_isoc(&ep->desc))
+		return 0;
+	return ep->ss_ep_comp.bmAttributes;
+}
+
+static u32 xhci_get_endpoint_max_burst(struct usb_device *udev,
+				       struct usb_host_endpoint *ep)
+{
+	/* Super speed and Plus have max burst in ep companion desc */
+	if (udev->speed >= USB_SPEED_SUPER)
+		return ep->ss_ep_comp.bMaxBurst;
+
+	if (udev->speed == USB_SPEED_HIGH &&
+	    (usb_endpoint_xfer_isoc(&ep->desc) ||
+	     usb_endpoint_xfer_int(&ep->desc)))
+		return usb_endpoint_maxp_mult(&ep->desc) - 1;
+
+	return 0;
+}
+
+static u32 xhci_get_endpoint_type(struct usb_host_endpoint *ep)
+{
+	int in;
+
+	in = usb_endpoint_dir_in(&ep->desc);
+
+	switch (usb_endpoint_type(&ep->desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		return CTRL_EP;
+	case USB_ENDPOINT_XFER_BULK:
+		return in ? BULK_IN_EP : BULK_OUT_EP;
+	case USB_ENDPOINT_XFER_ISOC:
+		return in ? ISOC_IN_EP : ISOC_OUT_EP;
+	case USB_ENDPOINT_XFER_INT:
+		return in ? INT_IN_EP : INT_OUT_EP;
+	}
+	return 0;
+}
+
+/* Return the maximum endpoint service interval time (ESIT) payload.
+ * Basically, this is the maxpacket size, multiplied by the burst size
+ * and mult size.
+ */
+static u32 xhci_get_max_esit_payload(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	int max_burst;
+	int max_packet;
+
+	/* Only applies for interrupt or isochronous endpoints */
+	if (usb_endpoint_xfer_control(&ep->desc) ||
+			usb_endpoint_xfer_bulk(&ep->desc))
+		return 0;
+
+	/* SuperSpeedPlus Isoc ep sending over 48k per esit */
+	if ((udev->speed >= USB_SPEED_SUPER_PLUS) &&
+	    USB_SS_SSP_ISOC_COMP(ep->ss_ep_comp.bmAttributes))
+		return le32_to_cpu(ep->ssp_isoc_ep_comp.dwBytesPerInterval);
+	/* SuperSpeed or SuperSpeedPlus Isoc ep with less than 48k per esit */
+	else if (udev->speed >= USB_SPEED_SUPER)
+		return le16_to_cpu(ep->ss_ep_comp.wBytesPerInterval);
+
+	max_packet = usb_endpoint_maxp(&ep->desc);
+	max_burst = usb_endpoint_maxp_mult(&ep->desc);
+	/* A 0 in max burst means 1 transfer per ESIT */
+	return max_packet * max_burst;
+}
+
+/* Set up an endpoint with one ring segment.  Do not allocate stream rings.
+ * Drivers will have to call usb_alloc_streams() to do that.
+ */
+int xhci_endpoint_init(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		struct usb_device *udev,
+		struct usb_host_endpoint *ep,
+		gfp_t mem_flags)
+{
+	unsigned int ep_index;
+	struct xhci_ep_ctx *ep_ctx;
+	struct xhci_ring *ep_ring;
+	unsigned int max_packet;
+	enum xhci_ring_type ring_type;
+	u32 max_esit_payload;
+	u32 endpoint_type;
+	unsigned int max_burst;
+	unsigned int interval;
+	unsigned int mult;
+	unsigned int avg_trb_len;
+	unsigned int err_count = 0;
+
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
+
+	endpoint_type = xhci_get_endpoint_type(ep);
+	if (!endpoint_type)
+		return -EINVAL;
+
+	ring_type = usb_endpoint_type(&ep->desc);
+
+	/*
+	 * Get values to fill the endpoint context, mostly from ep descriptor.
+	 * The average TRB buffer lengt for bulk endpoints is unclear as we
+	 * have no clue on scatter gather list entry size. For Isoc and Int,
+	 * set it to max available. See xHCI 1.1 spec 4.14.1.1 for details.
+	 */
+	max_esit_payload = xhci_get_max_esit_payload(udev, ep);
+	interval = xhci_get_endpoint_interval(udev, ep);
+
+	/* Periodic endpoint bInterval limit quirk */
+	if (usb_endpoint_xfer_int(&ep->desc) ||
+	    usb_endpoint_xfer_isoc(&ep->desc)) {
+		if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_7) &&
+		    udev->speed >= USB_SPEED_HIGH &&
+		    interval >= 7) {
+			interval = 6;
+		}
+	}
+
+	mult = xhci_get_endpoint_mult(udev, ep);
+	max_packet = usb_endpoint_maxp(&ep->desc);
+	max_burst = xhci_get_endpoint_max_burst(udev, ep);
+	avg_trb_len = max_esit_payload;
+
+	/* FIXME dig Mult and streams info out of ep companion desc */
+
+	/* Allow 3 retries for everything but isoc, set CErr = 3 */
+	if (!usb_endpoint_xfer_isoc(&ep->desc))
+		err_count = 3;
+	/* HS bulk max packet should be 512, FS bulk supports 8, 16, 32 or 64 */
+	if (usb_endpoint_xfer_bulk(&ep->desc)) {
+		if (udev->speed == USB_SPEED_HIGH)
+			max_packet = 512;
+		if (udev->speed == USB_SPEED_FULL) {
+			max_packet = rounddown_pow_of_two(max_packet);
+			max_packet = clamp_val(max_packet, 8, 64);
+		}
+	}
+	/* xHCI 1.0 and 1.1 indicates that ctrl ep avg TRB Length should be 8 */
+	if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version >= 0x100)
+		avg_trb_len = 8;
+	/* xhci 1.1 with LEC support doesn't use mult field, use RsvdZ */
+	if ((xhci->hci_version > 0x100) && HCC2_LEC(xhci->hcc_params2))
+		mult = 0;
+
+	/* Set up the endpoint ring */
+	virt_dev->eps[ep_index].new_ring =
+		xhci_ring_alloc(xhci, 2, 1, ring_type, max_packet, mem_flags);
+	if (!virt_dev->eps[ep_index].new_ring)
+		return -ENOMEM;
+
+	virt_dev->eps[ep_index].skip = false;
+	ep_ring = virt_dev->eps[ep_index].new_ring;
+
+	/* Fill the endpoint context */
+	ep_ctx->ep_info = cpu_to_le32(EP_MAX_ESIT_PAYLOAD_HI(max_esit_payload) |
+				      EP_INTERVAL(interval) |
+				      EP_MULT(mult));
+	ep_ctx->ep_info2 = cpu_to_le32(EP_TYPE(endpoint_type) |
+				       MAX_PACKET(max_packet) |
+				       MAX_BURST(max_burst) |
+				       ERROR_COUNT(err_count));
+	ep_ctx->deq = cpu_to_le64(ep_ring->first_seg->dma |
+				  ep_ring->cycle_state);
+
+	ep_ctx->tx_info = cpu_to_le32(EP_MAX_ESIT_PAYLOAD_LO(max_esit_payload) |
+				      EP_AVG_TRB_LENGTH(avg_trb_len));
+
+	return 0;
+}
+
+void xhci_endpoint_zero(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		struct usb_host_endpoint *ep)
+{
+	unsigned int ep_index;
+	struct xhci_ep_ctx *ep_ctx;
+
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
+
+	ep_ctx->ep_info = 0;
+	ep_ctx->ep_info2 = 0;
+	ep_ctx->deq = 0;
+	ep_ctx->tx_info = 0;
+	/* Don't free the endpoint ring until the set interface or configuration
+	 * request succeeds.
+	 */
+}
+
+void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info)
+{
+	bw_info->ep_interval = 0;
+	bw_info->mult = 0;
+	bw_info->num_packets = 0;
+	bw_info->max_packet_size = 0;
+	bw_info->type = 0;
+	bw_info->max_esit_payload = 0;
+}
+
+void xhci_update_bw_info(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_input_control_ctx *ctrl_ctx,
+		struct xhci_virt_device *virt_dev)
+{
+	struct xhci_bw_info *bw_info;
+	struct xhci_ep_ctx *ep_ctx;
+	unsigned int ep_type;
+	int i;
+
+	for (i = 1; i < 31; i++) {
+		bw_info = &virt_dev->eps[i].bw_info;
+
+		/* We can't tell what endpoint type is being dropped, but
+		 * unconditionally clearing the bandwidth info for non-periodic
+		 * endpoints should be harmless because the info will never be
+		 * set in the first place.
+		 */
+		if (!EP_IS_ADDED(ctrl_ctx, i) && EP_IS_DROPPED(ctrl_ctx, i)) {
+			/* Dropped endpoint */
+			xhci_clear_endpoint_bw_info(bw_info);
+			continue;
+		}
+
+		if (EP_IS_ADDED(ctrl_ctx, i)) {
+			ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, i);
+			ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2));
+
+			/* Ignore non-periodic endpoints */
+			if (ep_type != ISOC_OUT_EP && ep_type != INT_OUT_EP &&
+					ep_type != ISOC_IN_EP &&
+					ep_type != INT_IN_EP)
+				continue;
+
+			/* Added or changed endpoint */
+			bw_info->ep_interval = CTX_TO_EP_INTERVAL(
+					le32_to_cpu(ep_ctx->ep_info));
+			/* Number of packets and mult are zero-based in the
+			 * input context, but we want one-based for the
+			 * interval table.
+			 */
+			bw_info->mult = CTX_TO_EP_MULT(
+					le32_to_cpu(ep_ctx->ep_info)) + 1;
+			bw_info->num_packets = CTX_TO_MAX_BURST(
+					le32_to_cpu(ep_ctx->ep_info2)) + 1;
+			bw_info->max_packet_size = MAX_PACKET_DECODED(
+					le32_to_cpu(ep_ctx->ep_info2));
+			bw_info->type = ep_type;
+			bw_info->max_esit_payload = CTX_TO_MAX_ESIT_PAYLOAD(
+					le32_to_cpu(ep_ctx->tx_info));
+		}
+	}
+}
+
+/* Copy output xhci_ep_ctx to the input xhci_ep_ctx copy.
+ * Useful when you want to change one particular aspect of the endpoint and then
+ * issue a configure endpoint command.
+ */
+void xhci_endpoint_copy(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_container_ctx *out_ctx,
+		unsigned int ep_index)
+{
+	struct xhci_ep_ctx *out_ep_ctx;
+	struct xhci_ep_ctx *in_ep_ctx;
+
+	out_ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+	in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
+
+	in_ep_ctx->ep_info = out_ep_ctx->ep_info;
+	in_ep_ctx->ep_info2 = out_ep_ctx->ep_info2;
+	in_ep_ctx->deq = out_ep_ctx->deq;
+	in_ep_ctx->tx_info = out_ep_ctx->tx_info;
+	if (xhci->quirks & XHCI_MTK_HOST) {
+		in_ep_ctx->reserved[0] = out_ep_ctx->reserved[0];
+		in_ep_ctx->reserved[1] = out_ep_ctx->reserved[1];
+	}
+}
+
+/* Copy output xhci_slot_ctx to the input xhci_slot_ctx.
+ * Useful when you want to change one particular aspect of the endpoint and then
+ * issue a configure endpoint command.  Only the context entries field matters,
+ * but we'll copy the whole thing anyway.
+ */
+void xhci_slot_copy(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_container_ctx *out_ctx)
+{
+	struct xhci_slot_ctx *in_slot_ctx;
+	struct xhci_slot_ctx *out_slot_ctx;
+
+	in_slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
+	out_slot_ctx = xhci_get_slot_ctx(xhci, out_ctx);
+
+	in_slot_ctx->dev_info = out_slot_ctx->dev_info;
+	in_slot_ctx->dev_info2 = out_slot_ctx->dev_info2;
+	in_slot_ctx->tt_info = out_slot_ctx->tt_info;
+	in_slot_ctx->dev_state = out_slot_ctx->dev_state;
+}
+
+/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */
+static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
+{
+	int i;
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+	int num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"Allocating %d scratchpad buffers", num_sp);
+
+	if (!num_sp)
+		return 0;
+
+	xhci->scratchpad = kzalloc_node(sizeof(*xhci->scratchpad), flags,
+				dev_to_node(dev));
+	if (!xhci->scratchpad)
+		goto fail_sp;
+
+	xhci->scratchpad->sp_array = dma_alloc_coherent(dev,
+				     num_sp * sizeof(u64),
+				     &xhci->scratchpad->sp_dma, flags);
+	if (!xhci->scratchpad->sp_array)
+		goto fail_sp2;
+
+	xhci->scratchpad->sp_buffers = kcalloc_node(num_sp, sizeof(void *),
+					flags, dev_to_node(dev));
+	if (!xhci->scratchpad->sp_buffers)
+		goto fail_sp3;
+
+	xhci->dcbaa->dev_context_ptrs[0] = cpu_to_le64(xhci->scratchpad->sp_dma);
+	for (i = 0; i < num_sp; i++) {
+		dma_addr_t dma;
+		void *buf = dma_alloc_coherent(dev, xhci->page_size, &dma,
+					       flags);
+		if (!buf)
+			goto fail_sp4;
+
+		xhci->scratchpad->sp_array[i] = dma;
+		xhci->scratchpad->sp_buffers[i] = buf;
+	}
+
+	return 0;
+
+ fail_sp4:
+	for (i = i - 1; i >= 0; i--) {
+		dma_free_coherent(dev, xhci->page_size,
+				    xhci->scratchpad->sp_buffers[i],
+				    xhci->scratchpad->sp_array[i]);
+	}
+
+	kfree(xhci->scratchpad->sp_buffers);
+
+ fail_sp3:
+	dma_free_coherent(dev, num_sp * sizeof(u64),
+			    xhci->scratchpad->sp_array,
+			    xhci->scratchpad->sp_dma);
+
+ fail_sp2:
+	kfree(xhci->scratchpad);
+	xhci->scratchpad = NULL;
+
+ fail_sp:
+	return -ENOMEM;
+}
+
+static void scratchpad_free(struct xhci_hcd *xhci)
+{
+	int num_sp;
+	int i;
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+
+	if (!xhci->scratchpad)
+		return;
+
+	num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
+
+	for (i = 0; i < num_sp; i++) {
+		dma_free_coherent(dev, xhci->page_size,
+				    xhci->scratchpad->sp_buffers[i],
+				    xhci->scratchpad->sp_array[i]);
+	}
+	kfree(xhci->scratchpad->sp_buffers);
+	dma_free_coherent(dev, num_sp * sizeof(u64),
+			    xhci->scratchpad->sp_array,
+			    xhci->scratchpad->sp_dma);
+	kfree(xhci->scratchpad);
+	xhci->scratchpad = NULL;
+}
+
+struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
+		bool allocate_completion, gfp_t mem_flags)
+{
+	struct xhci_command *command;
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+
+	command = kzalloc_node(sizeof(*command), mem_flags, dev_to_node(dev));
+	if (!command)
+		return NULL;
+
+	if (allocate_completion) {
+		command->completion =
+			kzalloc_node(sizeof(struct completion), mem_flags,
+				dev_to_node(dev));
+		if (!command->completion) {
+			kfree(command);
+			return NULL;
+		}
+		init_completion(command->completion);
+	}
+
+	command->status = 0;
+	INIT_LIST_HEAD(&command->cmd_list);
+	return command;
+}
+
+struct xhci_command *xhci_alloc_command_with_ctx(struct xhci_hcd *xhci,
+		bool allocate_completion, gfp_t mem_flags)
+{
+	struct xhci_command *command;
+
+	command = xhci_alloc_command(xhci, allocate_completion, mem_flags);
+	if (!command)
+		return NULL;
+
+	command->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT,
+						   mem_flags);
+	if (!command->in_ctx) {
+		kfree(command->completion);
+		kfree(command);
+		return NULL;
+	}
+	return command;
+}
+
+void xhci_urb_free_priv(struct urb_priv *urb_priv)
+{
+	kfree(urb_priv);
+}
+
+void xhci_free_command(struct xhci_hcd *xhci,
+		struct xhci_command *command)
+{
+	xhci_free_container_ctx(xhci,
+			command->in_ctx);
+	kfree(command->completion);
+	kfree(command);
+}
+
+int xhci_alloc_erst(struct xhci_hcd *xhci,
+		    struct xhci_ring *evt_ring,
+		    struct xhci_erst *erst,
+		    gfp_t flags)
+{
+	size_t size;
+	unsigned int val;
+	struct xhci_segment *seg;
+	struct xhci_erst_entry *entry;
+
+	size = sizeof(struct xhci_erst_entry) * evt_ring->num_segs;
+	erst->entries = dma_alloc_coherent(xhci_to_hcd(xhci)->self.sysdev,
+					   size, &erst->erst_dma_addr, flags);
+	if (!erst->entries)
+		return -ENOMEM;
+
+	erst->num_entries = evt_ring->num_segs;
+
+	seg = evt_ring->first_seg;
+	for (val = 0; val < evt_ring->num_segs; val++) {
+		entry = &erst->entries[val];
+		entry->seg_addr = cpu_to_le64(seg->dma);
+		entry->seg_size = cpu_to_le32(TRBS_PER_SEGMENT);
+		entry->rsvd = 0;
+		seg = seg->next;
+	}
+
+	return 0;
+}
+
+void xhci_free_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
+{
+	size_t size;
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+
+	size = sizeof(struct xhci_erst_entry) * (erst->num_entries);
+	if (erst->entries)
+		dma_free_coherent(dev, size,
+				erst->entries,
+				erst->erst_dma_addr);
+	erst->entries = NULL;
+}
+
+void xhci_mem_cleanup(struct xhci_hcd *xhci)
+{
+	struct device	*dev = xhci_to_hcd(xhci)->self.sysdev;
+	int i, j, num_ports;
+
+	cancel_delayed_work_sync(&xhci->cmd_timer);
+
+	xhci_free_erst(xhci, &xhci->erst);
+
+	if (xhci->event_ring)
+		xhci_ring_free(xhci, xhci->event_ring);
+	xhci->event_ring = NULL;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed event ring");
+
+	if (xhci->cmd_ring)
+		xhci_ring_free(xhci, xhci->cmd_ring);
+	xhci->cmd_ring = NULL;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed command ring");
+	xhci_cleanup_command_queue(xhci);
+
+	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+	for (i = 0; i < num_ports && xhci->rh_bw; i++) {
+		struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
+		for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
+			struct list_head *ep = &bwt->interval_bw[j].endpoints;
+			while (!list_empty(ep))
+				list_del_init(ep->next);
+		}
+	}
+
+	for (i = HCS_MAX_SLOTS(xhci->hcs_params1); i > 0; i--)
+		xhci_free_virt_devices_depth_first(xhci, i);
+
+	dma_pool_destroy(xhci->segment_pool);
+	xhci->segment_pool = NULL;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed segment pool");
+
+	dma_pool_destroy(xhci->device_pool);
+	xhci->device_pool = NULL;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed device context pool");
+
+	dma_pool_destroy(xhci->small_streams_pool);
+	xhci->small_streams_pool = NULL;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"Freed small stream array pool");
+
+	dma_pool_destroy(xhci->medium_streams_pool);
+	xhci->medium_streams_pool = NULL;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"Freed medium stream array pool");
+
+	if (xhci->dcbaa)
+		dma_free_coherent(dev, sizeof(*xhci->dcbaa),
+				xhci->dcbaa, xhci->dcbaa->dma);
+	xhci->dcbaa = NULL;
+
+	scratchpad_free(xhci);
+
+	if (!xhci->rh_bw)
+		goto no_bw;
+
+	for (i = 0; i < num_ports; i++) {
+		struct xhci_tt_bw_info *tt, *n;
+		list_for_each_entry_safe(tt, n, &xhci->rh_bw[i].tts, tt_list) {
+			list_del(&tt->tt_list);
+			kfree(tt);
+		}
+	}
+
+no_bw:
+	xhci->cmd_ring_reserved_trbs = 0;
+	xhci->usb2_rhub.num_ports = 0;
+	xhci->usb3_rhub.num_ports = 0;
+	xhci->num_active_eps = 0;
+	kfree(xhci->usb2_rhub.ports);
+	kfree(xhci->usb3_rhub.ports);
+	kfree(xhci->hw_ports);
+	kfree(xhci->rh_bw);
+	kfree(xhci->ext_caps);
+	for (i = 0; i < xhci->num_port_caps; i++)
+		kfree(xhci->port_caps[i].psi);
+	kfree(xhci->port_caps);
+	xhci->num_port_caps = 0;
+
+	xhci->usb2_rhub.ports = NULL;
+	xhci->usb3_rhub.ports = NULL;
+	xhci->hw_ports = NULL;
+	xhci->rh_bw = NULL;
+	xhci->ext_caps = NULL;
+	xhci->port_caps = NULL;
+
+	xhci->page_size = 0;
+	xhci->page_shift = 0;
+	xhci->usb2_rhub.bus_state.bus_suspended = 0;
+	xhci->usb3_rhub.bus_state.bus_suspended = 0;
+}
+
+static int xhci_test_trb_in_td(struct xhci_hcd *xhci,
+		struct xhci_segment *input_seg,
+		union xhci_trb *start_trb,
+		union xhci_trb *end_trb,
+		dma_addr_t input_dma,
+		struct xhci_segment *result_seg,
+		char *test_name, int test_number)
+{
+	unsigned long long start_dma;
+	unsigned long long end_dma;
+	struct xhci_segment *seg;
+
+	start_dma = xhci_trb_virt_to_dma(input_seg, start_trb);
+	end_dma = xhci_trb_virt_to_dma(input_seg, end_trb);
+
+	seg = trb_in_td(xhci, input_seg, start_trb, end_trb, input_dma, false);
+	if (seg != result_seg) {
+		xhci_warn(xhci, "WARN: %s TRB math test %d failed!\n",
+				test_name, test_number);
+		xhci_warn(xhci, "Tested TRB math w/ seg %p and "
+				"input DMA 0x%llx\n",
+				input_seg,
+				(unsigned long long) input_dma);
+		xhci_warn(xhci, "starting TRB %p (0x%llx DMA), "
+				"ending TRB %p (0x%llx DMA)\n",
+				start_trb, start_dma,
+				end_trb, end_dma);
+		xhci_warn(xhci, "Expected seg %p, got seg %p\n",
+				result_seg, seg);
+		trb_in_td(xhci, input_seg, start_trb, end_trb, input_dma,
+			  true);
+		return -1;
+	}
+	return 0;
+}
+
+/* TRB math checks for xhci_trb_in_td(), using the command and event rings. */
+static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci)
+{
+	struct {
+		dma_addr_t		input_dma;
+		struct xhci_segment	*result_seg;
+	} simple_test_vector [] = {
+		/* A zeroed DMA field should fail */
+		{ 0, NULL },
+		/* One TRB before the ring start should fail */
+		{ xhci->event_ring->first_seg->dma - 16, NULL },
+		/* One byte before the ring start should fail */
+		{ xhci->event_ring->first_seg->dma - 1, NULL },
+		/* Starting TRB should succeed */
+		{ xhci->event_ring->first_seg->dma, xhci->event_ring->first_seg },
+		/* Ending TRB should succeed */
+		{ xhci->event_ring->first_seg->dma + (TRBS_PER_SEGMENT - 1)*16,
+			xhci->event_ring->first_seg },
+		/* One byte after the ring end should fail */
+		{ xhci->event_ring->first_seg->dma + (TRBS_PER_SEGMENT - 1)*16 + 1, NULL },
+		/* One TRB after the ring end should fail */
+		{ xhci->event_ring->first_seg->dma + (TRBS_PER_SEGMENT)*16, NULL },
+		/* An address of all ones should fail */
+		{ (dma_addr_t) (~0), NULL },
+	};
+	struct {
+		struct xhci_segment	*input_seg;
+		union xhci_trb		*start_trb;
+		union xhci_trb		*end_trb;
+		dma_addr_t		input_dma;
+		struct xhci_segment	*result_seg;
+	} complex_test_vector [] = {
+		/* Test feeding a valid DMA address from a different ring */
+		{	.input_seg = xhci->event_ring->first_seg,
+			.start_trb = xhci->event_ring->first_seg->trbs,
+			.end_trb = &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 1],
+			.input_dma = xhci->cmd_ring->first_seg->dma,
+			.result_seg = NULL,
+		},
+		/* Test feeding a valid end TRB from a different ring */
+		{	.input_seg = xhci->event_ring->first_seg,
+			.start_trb = xhci->event_ring->first_seg->trbs,
+			.end_trb = &xhci->cmd_ring->first_seg->trbs[TRBS_PER_SEGMENT - 1],
+			.input_dma = xhci->cmd_ring->first_seg->dma,
+			.result_seg = NULL,
+		},
+		/* Test feeding a valid start and end TRB from a different ring */
+		{	.input_seg = xhci->event_ring->first_seg,
+			.start_trb = xhci->cmd_ring->first_seg->trbs,
+			.end_trb = &xhci->cmd_ring->first_seg->trbs[TRBS_PER_SEGMENT - 1],
+			.input_dma = xhci->cmd_ring->first_seg->dma,
+			.result_seg = NULL,
+		},
+		/* TRB in this ring, but after this TD */
+		{	.input_seg = xhci->event_ring->first_seg,
+			.start_trb = &xhci->event_ring->first_seg->trbs[0],
+			.end_trb = &xhci->event_ring->first_seg->trbs[3],
+			.input_dma = xhci->event_ring->first_seg->dma + 4*16,
+			.result_seg = NULL,
+		},
+		/* TRB in this ring, but before this TD */
+		{	.input_seg = xhci->event_ring->first_seg,
+			.start_trb = &xhci->event_ring->first_seg->trbs[3],
+			.end_trb = &xhci->event_ring->first_seg->trbs[6],
+			.input_dma = xhci->event_ring->first_seg->dma + 2*16,
+			.result_seg = NULL,
+		},
+		/* TRB in this ring, but after this wrapped TD */
+		{	.input_seg = xhci->event_ring->first_seg,
+			.start_trb = &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 3],
+			.end_trb = &xhci->event_ring->first_seg->trbs[1],
+			.input_dma = xhci->event_ring->first_seg->dma + 2*16,
+			.result_seg = NULL,
+		},
+		/* TRB in this ring, but before this wrapped TD */
+		{	.input_seg = xhci->event_ring->first_seg,
+			.start_trb = &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 3],
+			.end_trb = &xhci->event_ring->first_seg->trbs[1],
+			.input_dma = xhci->event_ring->first_seg->dma + (TRBS_PER_SEGMENT - 4)*16,
+			.result_seg = NULL,
+		},
+		/* TRB not in this ring, and we have a wrapped TD */
+		{	.input_seg = xhci->event_ring->first_seg,
+			.start_trb = &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 3],
+			.end_trb = &xhci->event_ring->first_seg->trbs[1],
+			.input_dma = xhci->cmd_ring->first_seg->dma + 2*16,
+			.result_seg = NULL,
+		},
+	};
+
+	unsigned int num_tests;
+	int i, ret;
+
+	num_tests = ARRAY_SIZE(simple_test_vector);
+	for (i = 0; i < num_tests; i++) {
+		ret = xhci_test_trb_in_td(xhci,
+				xhci->event_ring->first_seg,
+				xhci->event_ring->first_seg->trbs,
+				&xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 1],
+				simple_test_vector[i].input_dma,
+				simple_test_vector[i].result_seg,
+				"Simple", i);
+		if (ret < 0)
+			return ret;
+	}
+
+	num_tests = ARRAY_SIZE(complex_test_vector);
+	for (i = 0; i < num_tests; i++) {
+		ret = xhci_test_trb_in_td(xhci,
+				complex_test_vector[i].input_seg,
+				complex_test_vector[i].start_trb,
+				complex_test_vector[i].end_trb,
+				complex_test_vector[i].input_dma,
+				complex_test_vector[i].result_seg,
+				"Complex", i);
+		if (ret < 0)
+			return ret;
+	}
+	xhci_dbg(xhci, "TRB math tests passed.\n");
+	return 0;
+}
+
+static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
+{
+	u64 temp;
+	dma_addr_t deq;
+
+	deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
+			xhci->event_ring->dequeue);
+	if (!deq)
+		xhci_warn(xhci, "WARN something wrong with SW event ring "
+				"dequeue ptr.\n");
+	/* Update HC event ring dequeue pointer */
+	temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	temp &= ERST_PTR_MASK;
+	/* Don't clear the EHB bit (which is RW1C) because
+	 * there might be more events to service.
+	 */
+	temp &= ~ERST_EHB;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// Write event ring dequeue pointer, "
+			"preserving EHB bit");
+	xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
+			&xhci->ir_set->erst_dequeue);
+}
+
+static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
+		__le32 __iomem *addr, int max_caps)
+{
+	u32 temp, port_offset, port_count;
+	int i;
+	u8 major_revision, minor_revision, tmp_minor_revision;
+	struct xhci_hub *rhub;
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+	struct xhci_port_cap *port_cap;
+
+	temp = readl(addr);
+	major_revision = XHCI_EXT_PORT_MAJOR(temp);
+	minor_revision = XHCI_EXT_PORT_MINOR(temp);
+
+	if (major_revision == 0x03) {
+		rhub = &xhci->usb3_rhub;
+		/*
+		 * Some hosts incorrectly use sub-minor version for minor
+		 * version (i.e. 0x02 instead of 0x20 for bcdUSB 0x320 and 0x01
+		 * for bcdUSB 0x310). Since there is no USB release with sub
+		 * minor version 0x301 to 0x309, we can assume that they are
+		 * incorrect and fix it here.
+		 */
+		if (minor_revision > 0x00 && minor_revision < 0x10)
+			minor_revision <<= 4;
+		/*
+		 * Some zhaoxin's xHCI controller that follow usb3.1 spec
+		 * but only support Gen1.
+		 */
+		if (xhci->quirks & XHCI_ZHAOXIN_HOST) {
+			tmp_minor_revision = minor_revision;
+			minor_revision = 0;
+		}
+
+	} else if (major_revision <= 0x02) {
+		rhub = &xhci->usb2_rhub;
+	} else {
+		xhci_warn(xhci, "Ignoring unknown port speed, "
+				"Ext Cap %p, revision = 0x%x\n",
+				addr, major_revision);
+		/* Ignoring port protocol we can't understand. FIXME */
+		return;
+	}
+
+	/* Port offset and count in the third dword, see section 7.2 */
+	temp = readl(addr + 2);
+	port_offset = XHCI_EXT_PORT_OFF(temp);
+	port_count = XHCI_EXT_PORT_COUNT(temp);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"Ext Cap %p, port offset = %u, "
+			"count = %u, revision = 0x%x",
+			addr, port_offset, port_count, major_revision);
+	/* Port count includes the current port offset */
+	if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
+		/* WTF? "Valid values are ‘1’ to MaxPorts" */
+		return;
+
+	port_cap = &xhci->port_caps[xhci->num_port_caps++];
+	if (xhci->num_port_caps > max_caps)
+		return;
+
+	port_cap->psi_count = XHCI_EXT_PORT_PSIC(temp);
+
+	if (port_cap->psi_count) {
+		port_cap->psi = kcalloc_node(port_cap->psi_count,
+					     sizeof(*port_cap->psi),
+					     GFP_KERNEL, dev_to_node(dev));
+		if (!port_cap->psi)
+			port_cap->psi_count = 0;
+
+		port_cap->psi_uid_count++;
+		for (i = 0; i < port_cap->psi_count; i++) {
+			port_cap->psi[i] = readl(addr + 4 + i);
+
+			/* count unique ID values, two consecutive entries can
+			 * have the same ID if link is assymetric
+			 */
+			if (i && (XHCI_EXT_PORT_PSIV(port_cap->psi[i]) !=
+				  XHCI_EXT_PORT_PSIV(port_cap->psi[i - 1])))
+				port_cap->psi_uid_count++;
+
+			if (xhci->quirks & XHCI_ZHAOXIN_HOST &&
+			    major_revision == 0x03 &&
+			    XHCI_EXT_PORT_PSIV(port_cap->psi[i]) >= 5)
+				minor_revision = tmp_minor_revision;
+
+			xhci_dbg(xhci, "PSIV:%d PSIE:%d PLT:%d PFD:%d LP:%d PSIM:%d\n",
+				  XHCI_EXT_PORT_PSIV(port_cap->psi[i]),
+				  XHCI_EXT_PORT_PSIE(port_cap->psi[i]),
+				  XHCI_EXT_PORT_PLT(port_cap->psi[i]),
+				  XHCI_EXT_PORT_PFD(port_cap->psi[i]),
+				  XHCI_EXT_PORT_LP(port_cap->psi[i]),
+				  XHCI_EXT_PORT_PSIM(port_cap->psi[i]));
+		}
+	}
+
+	rhub->maj_rev = major_revision;
+
+	if (rhub->min_rev < minor_revision)
+		rhub->min_rev = minor_revision;
+
+	port_cap->maj_rev = major_revision;
+	port_cap->min_rev = minor_revision;
+
+	/* cache usb2 port capabilities */
+	if (major_revision < 0x03 && xhci->num_ext_caps < max_caps)
+		xhci->ext_caps[xhci->num_ext_caps++] = temp;
+
+	if ((xhci->hci_version >= 0x100) && (major_revision != 0x03) &&
+		 (temp & XHCI_HLC)) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			       "xHCI 1.0: support USB2 hardware lpm");
+		xhci->hw_lpm_support = 1;
+	}
+
+	port_offset--;
+	for (i = port_offset; i < (port_offset + port_count); i++) {
+		struct xhci_port *hw_port = &xhci->hw_ports[i];
+		/* Duplicate entry.  Ignore the port if the revisions differ. */
+		if (hw_port->rhub) {
+			xhci_warn(xhci, "Duplicate port entry, Ext Cap %p,"
+					" port %u\n", addr, i);
+			xhci_warn(xhci, "Port was marked as USB %u, "
+					"duplicated as USB %u\n",
+					hw_port->rhub->maj_rev, major_revision);
+			/* Only adjust the roothub port counts if we haven't
+			 * found a similar duplicate.
+			 */
+			if (hw_port->rhub != rhub &&
+				 hw_port->hcd_portnum != DUPLICATE_ENTRY) {
+				hw_port->rhub->num_ports--;
+				hw_port->hcd_portnum = DUPLICATE_ENTRY;
+			}
+			continue;
+		}
+		hw_port->rhub = rhub;
+		hw_port->port_cap = port_cap;
+		rhub->num_ports++;
+	}
+	/* FIXME: Should we disable ports not in the Extended Capabilities? */
+}
+
+static void xhci_create_rhub_port_array(struct xhci_hcd *xhci,
+					struct xhci_hub *rhub, gfp_t flags)
+{
+	int port_index = 0;
+	int i;
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+
+	if (!rhub->num_ports)
+		return;
+	rhub->ports = kcalloc_node(rhub->num_ports, sizeof(*rhub->ports),
+			flags, dev_to_node(dev));
+	if (!rhub->ports)
+		return;
+
+	for (i = 0; i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
+		if (xhci->hw_ports[i].rhub != rhub ||
+		    xhci->hw_ports[i].hcd_portnum == DUPLICATE_ENTRY)
+			continue;
+		xhci->hw_ports[i].hcd_portnum = port_index;
+		rhub->ports[port_index] = &xhci->hw_ports[i];
+		port_index++;
+		if (port_index == rhub->num_ports)
+			break;
+	}
+}
+
+/*
+ * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
+ * specify what speeds each port is supposed to be.  We can't count on the port
+ * speed bits in the PORTSC register being correct until a device is connected,
+ * but we need to set up the two fake roothubs with the correct number of USB
+ * 3.0 and USB 2.0 ports at host controller initialization time.
+ */
+static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
+{
+	void __iomem *base;
+	u32 offset;
+	unsigned int num_ports;
+	int i, j;
+	int cap_count = 0;
+	u32 cap_start;
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+
+	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+	xhci->hw_ports = kcalloc_node(num_ports, sizeof(*xhci->hw_ports),
+				flags, dev_to_node(dev));
+	if (!xhci->hw_ports)
+		return -ENOMEM;
+
+	for (i = 0; i < num_ports; i++) {
+		xhci->hw_ports[i].addr = &xhci->op_regs->port_status_base +
+			NUM_PORT_REGS * i;
+		xhci->hw_ports[i].hw_portnum = i;
+	}
+
+	xhci->rh_bw = kcalloc_node(num_ports, sizeof(*xhci->rh_bw), flags,
+				   dev_to_node(dev));
+	if (!xhci->rh_bw)
+		return -ENOMEM;
+	for (i = 0; i < num_ports; i++) {
+		struct xhci_interval_bw_table *bw_table;
+
+		INIT_LIST_HEAD(&xhci->rh_bw[i].tts);
+		bw_table = &xhci->rh_bw[i].bw_table;
+		for (j = 0; j < XHCI_MAX_INTERVAL; j++)
+			INIT_LIST_HEAD(&bw_table->interval_bw[j].endpoints);
+	}
+	base = &xhci->cap_regs->hc_capbase;
+
+	cap_start = xhci_find_next_ext_cap(base, 0, XHCI_EXT_CAPS_PROTOCOL);
+	if (!cap_start) {
+		xhci_err(xhci, "No Extended Capability registers, unable to set up roothub\n");
+		return -ENODEV;
+	}
+
+	offset = cap_start;
+	/* count extended protocol capability entries for later caching */
+	while (offset) {
+		cap_count++;
+		offset = xhci_find_next_ext_cap(base, offset,
+						      XHCI_EXT_CAPS_PROTOCOL);
+	}
+
+	xhci->ext_caps = kcalloc_node(cap_count, sizeof(*xhci->ext_caps),
+				flags, dev_to_node(dev));
+	if (!xhci->ext_caps)
+		return -ENOMEM;
+
+	xhci->port_caps = kcalloc_node(cap_count, sizeof(*xhci->port_caps),
+				flags, dev_to_node(dev));
+	if (!xhci->port_caps)
+		return -ENOMEM;
+
+	offset = cap_start;
+
+	while (offset) {
+		xhci_add_in_port(xhci, num_ports, base + offset, cap_count);
+		if (xhci->usb2_rhub.num_ports + xhci->usb3_rhub.num_ports ==
+		    num_ports)
+			break;
+		offset = xhci_find_next_ext_cap(base, offset,
+						XHCI_EXT_CAPS_PROTOCOL);
+	}
+	if (xhci->usb2_rhub.num_ports == 0 && xhci->usb3_rhub.num_ports == 0) {
+		xhci_warn(xhci, "No ports on the roothubs?\n");
+		return -ENODEV;
+	}
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+		       "Found %u USB 2.0 ports and %u USB 3.0 ports.",
+		       xhci->usb2_rhub.num_ports, xhci->usb3_rhub.num_ports);
+
+	/* Place limits on the number of roothub ports so that the hub
+	 * descriptors aren't longer than the USB core will allocate.
+	 */
+	if (xhci->usb3_rhub.num_ports > USB_SS_MAXPORTS) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+				"Limiting USB 3.0 roothub ports to %u.",
+				USB_SS_MAXPORTS);
+		xhci->usb3_rhub.num_ports = USB_SS_MAXPORTS;
+	}
+	if (xhci->usb2_rhub.num_ports > USB_MAXCHILDREN) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+				"Limiting USB 2.0 roothub ports to %u.",
+				USB_MAXCHILDREN);
+		xhci->usb2_rhub.num_ports = USB_MAXCHILDREN;
+	}
+
+	if (!xhci->usb2_rhub.num_ports)
+		xhci_info(xhci, "USB2 root hub has no ports\n");
+
+	if (!xhci->usb3_rhub.num_ports)
+		xhci_info(xhci, "USB3 root hub has no ports\n");
+
+	xhci_create_rhub_port_array(xhci, &xhci->usb2_rhub, flags);
+	xhci_create_rhub_port_array(xhci, &xhci->usb3_rhub, flags);
+
+	return 0;
+}
+
+int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
+{
+	dma_addr_t	dma;
+	struct device	*dev = xhci_to_hcd(xhci)->self.sysdev;
+	unsigned int	val, val2;
+	u64		val_64;
+	u32		page_size, temp;
+	int		i, ret;
+
+	INIT_LIST_HEAD(&xhci->cmd_list);
+
+	/* init command timeout work */
+	INIT_DELAYED_WORK(&xhci->cmd_timer, xhci_handle_command_timeout);
+	init_completion(&xhci->cmd_ring_stop_completion);
+
+	page_size = readl(&xhci->op_regs->page_size);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"Supported page size register = 0x%x", page_size);
+	i = ffs(page_size);
+	if (i < 16)
+		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"Supported page size of %iK", (1 << (i+12)) / 1024);
+	else
+		xhci_warn(xhci, "WARN: no supported page size\n");
+	/* Use 4K pages, since that's common and the minimum the HC supports */
+	xhci->page_shift = 12;
+	xhci->page_size = 1 << xhci->page_shift;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"HCD page size set to %iK", xhci->page_size / 1024);
+
+	/*
+	 * Program the Number of Device Slots Enabled field in the CONFIG
+	 * register with the max value of slots the HC can handle.
+	 */
+	val = HCS_MAX_SLOTS(readl(&xhci->cap_regs->hcs_params1));
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// xHC can handle at most %d device slots.", val);
+	val2 = readl(&xhci->op_regs->config_reg);
+	val |= (val2 & ~HCS_SLOTS_MASK);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// Setting Max device slots reg = 0x%x.", val);
+	writel(val, &xhci->op_regs->config_reg);
+
+	/*
+	 * xHCI section 5.4.6 - Device Context array must be
+	 * "physically contiguous and 64-byte (cache line) aligned".
+	 */
+	xhci->dcbaa = dma_alloc_coherent(dev, sizeof(*xhci->dcbaa), &dma,
+			flags);
+	if (!xhci->dcbaa)
+		goto fail;
+	xhci->dcbaa->dma = dma;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// Device context base array address = 0x%llx (DMA), %p (virt)",
+			(unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
+	xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
+
+	/*
+	 * Initialize the ring segment pool.  The ring must be a contiguous
+	 * structure comprised of TRBs.  The TRBs must be 16 byte aligned,
+	 * however, the command ring segment needs 64-byte aligned segments
+	 * and our use of dma addresses in the trb_address_map radix tree needs
+	 * TRB_SEGMENT_SIZE alignment, so we pick the greater alignment need.
+	 */
+	if (xhci->quirks & XHCI_ZHAOXIN_TRB_FETCH)
+		xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
+				TRB_SEGMENT_SIZE * 2, TRB_SEGMENT_SIZE * 2, xhci->page_size * 2);
+	else
+		xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
+				TRB_SEGMENT_SIZE, TRB_SEGMENT_SIZE, xhci->page_size);
+
+	/* See Table 46 and Note on Figure 55 */
+	xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
+			2112, 64, xhci->page_size);
+	if (!xhci->segment_pool || !xhci->device_pool)
+		goto fail;
+
+	/* Linear stream context arrays don't have any boundary restrictions,
+	 * and only need to be 16-byte aligned.
+	 */
+	xhci->small_streams_pool =
+		dma_pool_create("xHCI 256 byte stream ctx arrays",
+			dev, SMALL_STREAM_ARRAY_SIZE, 16, 0);
+	xhci->medium_streams_pool =
+		dma_pool_create("xHCI 1KB stream ctx arrays",
+			dev, MEDIUM_STREAM_ARRAY_SIZE, 16, 0);
+	/* Any stream context array bigger than MEDIUM_STREAM_ARRAY_SIZE
+	 * will be allocated with dma_alloc_coherent()
+	 */
+
+	if (!xhci->small_streams_pool || !xhci->medium_streams_pool)
+		goto fail;
+
+	/* Set up the command ring to have one segments for now. */
+	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, 0, flags);
+	if (!xhci->cmd_ring)
+		goto fail;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"Allocated command ring at %p", xhci->cmd_ring);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "First segment DMA is 0x%llx",
+			(unsigned long long)xhci->cmd_ring->first_seg->dma);
+
+	/* Set the address in the Command Ring Control register */
+	val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+	val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+		(xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
+		xhci->cmd_ring->cycle_state;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// Setting command ring address to 0x%016llx", val_64);
+	xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+
+	/* Reserve one command ring TRB for disabling LPM.
+	 * Since the USB core grabs the shared usb_bus bandwidth mutex before
+	 * disabling LPM, we only need to reserve one TRB for all devices.
+	 */
+	xhci->cmd_ring_reserved_trbs++;
+
+	val = readl(&xhci->cap_regs->db_off);
+	val &= DBOFF_MASK;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// Doorbell array is located at offset 0x%x"
+			" from cap regs base addr", val);
+	xhci->dba = (void __iomem *) xhci->cap_regs + val;
+	/* Set ir_set to interrupt register set 0 */
+	xhci->ir_set = &xhci->run_regs->ir_set[0];
+
+	/*
+	 * Event ring setup: Allocate a normal ring, but also setup
+	 * the event ring segment table (ERST).  Section 4.9.3.
+	 */
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Allocating event ring");
+	xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, 1, TYPE_EVENT,
+					0, flags);
+	if (!xhci->event_ring)
+		goto fail;
+	if (xhci_check_trb_in_td_math(xhci) < 0)
+		goto fail;
+
+	ret = xhci_alloc_erst(xhci, xhci->event_ring, &xhci->erst, flags);
+	if (ret)
+		goto fail;
+
+	/* set ERST count with the number of entries in the segment table */
+	val = readl(&xhci->ir_set->erst_size);
+	val &= ERST_SIZE_MASK;
+	val |= ERST_NUM_SEGS;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// Write ERST size = %i to ir_set 0 (some bits preserved)",
+			val);
+	writel(val, &xhci->ir_set->erst_size);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// Set ERST entries to point to event ring.");
+	/* set the segment table base address */
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// Set ERST base address for ir_set 0 = 0x%llx",
+			(unsigned long long)xhci->erst.erst_dma_addr);
+	val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base);
+	val_64 &= ERST_PTR_MASK;
+	val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK);
+	xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base);
+
+	/* Set the event ring dequeue address */
+	xhci_set_hc_event_deq(xhci);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"Wrote ERST address to ir_set 0.");
+
+	xhci->isoc_bei_interval = AVOID_BEI_INTERVAL_MAX;
+
+	/*
+	 * XXX: Might need to set the Interrupter Moderation Register to
+	 * something other than the default (~1ms minimum between interrupts).
+	 * See section 5.5.1.2.
+	 */
+	for (i = 0; i < MAX_HC_SLOTS; i++)
+		xhci->devs[i] = NULL;
+	for (i = 0; i < USB_MAXCHILDREN; i++) {
+		xhci->usb2_rhub.bus_state.resume_done[i] = 0;
+		xhci->usb3_rhub.bus_state.resume_done[i] = 0;
+		/* Only the USB 2.0 completions will ever be used. */
+		init_completion(&xhci->usb2_rhub.bus_state.rexit_done[i]);
+		init_completion(&xhci->usb3_rhub.bus_state.u3exit_done[i]);
+	}
+
+	if (scratchpad_alloc(xhci, flags))
+		goto fail;
+	if (xhci_setup_port_arrays(xhci, flags))
+		goto fail;
+
+	/* Enable USB 3.0 device notifications for function remote wake, which
+	 * is necessary for allowing USB 3.0 devices to do remote wakeup from
+	 * U3 (device suspend).
+	 */
+	temp = readl(&xhci->op_regs->dev_notification);
+	temp &= ~DEV_NOTE_MASK;
+	temp |= DEV_NOTE_FWAKE;
+	writel(temp, &xhci->op_regs->dev_notification);
+
+	return 0;
+
+fail:
+	xhci_halt(xhci);
+	xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
+	xhci_mem_cleanup(xhci);
+	return -ENOMEM;
+}
diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
new file mode 100644
index 000000000..579899eb2
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -0,0 +1,771 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author:
+ *  Zhigang.Wei <zhigang.wei@mediatek.com>
+ *  Chunfeng.Yun <chunfeng.yun@mediatek.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "xhci.h"
+#include "xhci-mtk.h"
+
+#define SSP_BW_BOUNDARY	130000
+#define SS_BW_BOUNDARY	51000
+/* table 5-5. High-speed Isoc Transaction Limits in usb_20 spec */
+#define HS_BW_BOUNDARY	6144
+/* usb2 spec section11.18.1: at most 188 FS bytes per microframe */
+#define FS_PAYLOAD_MAX 188
+
+#define DBG_BUF_EN	64
+
+/* schedule error type */
+#define ESCH_SS_Y6		1001
+#define ESCH_SS_OVERLAP		1002
+#define ESCH_CS_OVERFLOW	1003
+#define ESCH_BW_OVERFLOW	1004
+#define ESCH_FIXME		1005
+
+/* mtk scheduler bitmasks */
+#define EP_BPKTS(p)	((p) & 0x7f)
+#define EP_BCSCOUNT(p)	(((p) & 0x7) << 8)
+#define EP_BBM(p)	((p) << 11)
+#define EP_BOFFSET(p)	((p) & 0x3fff)
+#define EP_BREPEAT(p)	(((p) & 0x7fff) << 16)
+
+static char *sch_error_string(int err_num)
+{
+	switch (err_num) {
+	case ESCH_SS_Y6:
+		return "Can't schedule Start-Split in Y6";
+	case ESCH_SS_OVERLAP:
+		return "Can't find a suitable Start-Split location";
+	case ESCH_CS_OVERFLOW:
+		return "The last Complete-Split is greater than 7";
+	case ESCH_BW_OVERFLOW:
+		return "Bandwidth exceeds the maximum limit";
+	case ESCH_FIXME:
+		return "FIXME, to be resolved";
+	default:
+		return "Unknown";
+	}
+}
+
+static int is_fs_or_ls(enum usb_device_speed speed)
+{
+	return speed == USB_SPEED_FULL || speed == USB_SPEED_LOW;
+}
+
+static const char *
+decode_ep(struct usb_host_endpoint *ep, enum usb_device_speed speed)
+{
+	static char buf[DBG_BUF_EN];
+	struct usb_endpoint_descriptor *epd = &ep->desc;
+	unsigned int interval;
+	const char *unit;
+
+	interval = usb_decode_interval(epd, speed);
+	if (interval % 1000) {
+		unit = "us";
+	} else {
+		unit = "ms";
+		interval /= 1000;
+	}
+
+	snprintf(buf, DBG_BUF_EN, "%s ep%d%s %s, mpkt:%d, interval:%d/%d%s",
+		 usb_speed_string(speed), usb_endpoint_num(epd),
+		 usb_endpoint_dir_in(epd) ? "in" : "out",
+		 usb_ep_type_string(usb_endpoint_type(epd)),
+		 usb_endpoint_maxp(epd), epd->bInterval, interval, unit);
+
+	return buf;
+}
+
+static u32 get_bw_boundary(enum usb_device_speed speed)
+{
+	u32 boundary;
+
+	switch (speed) {
+	case USB_SPEED_SUPER_PLUS:
+		boundary = SSP_BW_BOUNDARY;
+		break;
+	case USB_SPEED_SUPER:
+		boundary = SS_BW_BOUNDARY;
+		break;
+	default:
+		boundary = HS_BW_BOUNDARY;
+		break;
+	}
+
+	return boundary;
+}
+
+/*
+* get the bandwidth domain which @ep belongs to.
+*
+* the bandwidth domain array is saved to @sch_array of struct xhci_hcd_mtk,
+* each HS root port is treated as a single bandwidth domain,
+* but each SS root port is treated as two bandwidth domains, one for IN eps,
+* one for OUT eps.
+* @real_port value is defined as follow according to xHCI spec:
+* 1 for SSport0, ..., N+1 for SSportN, N+2 for HSport0, N+3 for HSport1, etc
+* so the bandwidth domain array is organized as follow for simplification:
+* SSport0-OUT, SSport0-IN, ..., SSportX-OUT, SSportX-IN, HSport0, ..., HSportY
+*/
+static struct mu3h_sch_bw_info *
+get_bw_info(struct xhci_hcd_mtk *mtk, struct usb_device *udev,
+	    struct usb_host_endpoint *ep)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(mtk->hcd);
+	struct xhci_virt_device *virt_dev;
+	int bw_index;
+
+	virt_dev = xhci->devs[udev->slot_id];
+	if (!virt_dev->real_port) {
+		WARN_ONCE(1, "%s invalid real_port\n", dev_name(&udev->dev));
+		return NULL;
+	}
+
+	if (udev->speed >= USB_SPEED_SUPER) {
+		if (usb_endpoint_dir_out(&ep->desc))
+			bw_index = (virt_dev->real_port - 1) * 2;
+		else
+			bw_index = (virt_dev->real_port - 1) * 2 + 1;
+	} else {
+		/* add one more for each SS port */
+		bw_index = virt_dev->real_port + xhci->usb3_rhub.num_ports - 1;
+	}
+
+	return &mtk->sch_array[bw_index];
+}
+
+static u32 get_esit(struct xhci_ep_ctx *ep_ctx)
+{
+	u32 esit;
+
+	esit = 1 << CTX_TO_EP_INTERVAL(le32_to_cpu(ep_ctx->ep_info));
+	if (esit > XHCI_MTK_MAX_ESIT)
+		esit = XHCI_MTK_MAX_ESIT;
+
+	return esit;
+}
+
+static struct mu3h_sch_tt *find_tt(struct usb_device *udev)
+{
+	struct usb_tt *utt = udev->tt;
+	struct mu3h_sch_tt *tt, **tt_index, **ptt;
+	bool allocated_index = false;
+
+	if (!utt)
+		return NULL;	/* Not below a TT */
+
+	/*
+	 * Find/create our data structure.
+	 * For hubs with a single TT, we get it directly.
+	 * For hubs with multiple TTs, there's an extra level of pointers.
+	 */
+	tt_index = NULL;
+	if (utt->multi) {
+		tt_index = utt->hcpriv;
+		if (!tt_index) {	/* Create the index array */
+			tt_index = kcalloc(utt->hub->maxchild,
+					sizeof(*tt_index), GFP_KERNEL);
+			if (!tt_index)
+				return ERR_PTR(-ENOMEM);
+			utt->hcpriv = tt_index;
+			allocated_index = true;
+		}
+		ptt = &tt_index[udev->ttport - 1];
+	} else {
+		ptt = (struct mu3h_sch_tt **) &utt->hcpriv;
+	}
+
+	tt = *ptt;
+	if (!tt) {	/* Create the mu3h_sch_tt */
+		tt = kzalloc(sizeof(*tt), GFP_KERNEL);
+		if (!tt) {
+			if (allocated_index) {
+				utt->hcpriv = NULL;
+				kfree(tt_index);
+			}
+			return ERR_PTR(-ENOMEM);
+		}
+		INIT_LIST_HEAD(&tt->ep_list);
+		*ptt = tt;
+	}
+
+	return tt;
+}
+
+/* Release the TT above udev, if it's not in use */
+static void drop_tt(struct usb_device *udev)
+{
+	struct usb_tt *utt = udev->tt;
+	struct mu3h_sch_tt *tt, **tt_index, **ptt;
+	int i, cnt;
+
+	if (!utt || !utt->hcpriv)
+		return;		/* Not below a TT, or never allocated */
+
+	cnt = 0;
+	if (utt->multi) {
+		tt_index = utt->hcpriv;
+		ptt = &tt_index[udev->ttport - 1];
+		/*  How many entries are left in tt_index? */
+		for (i = 0; i < utt->hub->maxchild; ++i)
+			cnt += !!tt_index[i];
+	} else {
+		tt_index = NULL;
+		ptt = (struct mu3h_sch_tt **)&utt->hcpriv;
+	}
+
+	tt = *ptt;
+	if (!tt || !list_empty(&tt->ep_list))
+		return;		/* never allocated , or still in use*/
+
+	*ptt = NULL;
+	kfree(tt);
+
+	if (cnt == 1) {
+		utt->hcpriv = NULL;
+		kfree(tt_index);
+	}
+}
+
+static struct mu3h_sch_ep_info *
+create_sch_ep(struct xhci_hcd_mtk *mtk, struct usb_device *udev,
+	      struct usb_host_endpoint *ep)
+{
+	struct mu3h_sch_ep_info *sch_ep;
+	struct mu3h_sch_bw_info *bw_info;
+	struct mu3h_sch_tt *tt = NULL;
+
+	bw_info = get_bw_info(mtk, udev, ep);
+	if (!bw_info)
+		return ERR_PTR(-ENODEV);
+
+	sch_ep = kzalloc(sizeof(*sch_ep), GFP_KERNEL);
+	if (!sch_ep)
+		return ERR_PTR(-ENOMEM);
+
+	if (is_fs_or_ls(udev->speed)) {
+		tt = find_tt(udev);
+		if (IS_ERR(tt)) {
+			kfree(sch_ep);
+			return ERR_PTR(-ENOMEM);
+		}
+	}
+
+	sch_ep->bw_info = bw_info;
+	sch_ep->sch_tt = tt;
+	sch_ep->ep = ep;
+	sch_ep->speed = udev->speed;
+	INIT_LIST_HEAD(&sch_ep->endpoint);
+	INIT_LIST_HEAD(&sch_ep->tt_endpoint);
+	INIT_HLIST_NODE(&sch_ep->hentry);
+
+	return sch_ep;
+}
+
+static void setup_sch_info(struct xhci_ep_ctx *ep_ctx,
+			   struct mu3h_sch_ep_info *sch_ep)
+{
+	u32 ep_type;
+	u32 maxpkt;
+	u32 max_burst;
+	u32 mult;
+	u32 esit_pkts;
+	u32 max_esit_payload;
+
+	ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2));
+	maxpkt = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2));
+	max_burst = CTX_TO_MAX_BURST(le32_to_cpu(ep_ctx->ep_info2));
+	mult = CTX_TO_EP_MULT(le32_to_cpu(ep_ctx->ep_info));
+	max_esit_payload =
+		(CTX_TO_MAX_ESIT_PAYLOAD_HI(
+			le32_to_cpu(ep_ctx->ep_info)) << 16) |
+		 CTX_TO_MAX_ESIT_PAYLOAD(le32_to_cpu(ep_ctx->tx_info));
+
+	sch_ep->esit = get_esit(ep_ctx);
+	sch_ep->num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit;
+	sch_ep->ep_type = ep_type;
+	sch_ep->maxpkt = maxpkt;
+	sch_ep->offset = 0;
+	sch_ep->burst_mode = 0;
+	sch_ep->repeat = 0;
+
+	if (sch_ep->speed == USB_SPEED_HIGH) {
+		sch_ep->cs_count = 0;
+
+		/*
+		 * usb_20 spec section5.9
+		 * a single microframe is enough for HS synchromous endpoints
+		 * in a interval
+		 */
+		sch_ep->num_budget_microframes = 1;
+
+		/*
+		 * xHCI spec section6.2.3.4
+		 * @max_burst is the number of additional transactions
+		 * opportunities per microframe
+		 */
+		sch_ep->pkts = max_burst + 1;
+		sch_ep->bw_cost_per_microframe = maxpkt * sch_ep->pkts;
+	} else if (sch_ep->speed >= USB_SPEED_SUPER) {
+		/* usb3_r1 spec section4.4.7 & 4.4.8 */
+		sch_ep->cs_count = 0;
+		sch_ep->burst_mode = 1;
+		/*
+		 * some device's (d)wBytesPerInterval is set as 0,
+		 * then max_esit_payload is 0, so evaluate esit_pkts from
+		 * mult and burst
+		 */
+		esit_pkts = DIV_ROUND_UP(max_esit_payload, maxpkt);
+		if (esit_pkts == 0)
+			esit_pkts = (mult + 1) * (max_burst + 1);
+
+		if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) {
+			sch_ep->pkts = esit_pkts;
+			sch_ep->num_budget_microframes = 1;
+		}
+
+		if (ep_type == ISOC_IN_EP || ep_type == ISOC_OUT_EP) {
+
+			if (sch_ep->esit == 1)
+				sch_ep->pkts = esit_pkts;
+			else if (esit_pkts <= sch_ep->esit)
+				sch_ep->pkts = 1;
+			else
+				sch_ep->pkts = roundup_pow_of_two(esit_pkts)
+					/ sch_ep->esit;
+
+			sch_ep->num_budget_microframes =
+				DIV_ROUND_UP(esit_pkts, sch_ep->pkts);
+
+			sch_ep->repeat = !!(sch_ep->num_budget_microframes > 1);
+		}
+		sch_ep->bw_cost_per_microframe = maxpkt * sch_ep->pkts;
+	} else if (is_fs_or_ls(sch_ep->speed)) {
+		sch_ep->pkts = 1; /* at most one packet for each microframe */
+
+		/*
+		 * num_budget_microframes and cs_count will be updated when
+		 * check TT for INT_OUT_EP, ISOC/INT_IN_EP type
+		 */
+		sch_ep->cs_count = DIV_ROUND_UP(maxpkt, FS_PAYLOAD_MAX);
+		sch_ep->num_budget_microframes = sch_ep->cs_count;
+		sch_ep->bw_cost_per_microframe = min_t(u32, maxpkt, FS_PAYLOAD_MAX);
+	}
+}
+
+/* Get maximum bandwidth when we schedule at offset slot. */
+static u32 get_max_bw(struct mu3h_sch_bw_info *sch_bw,
+	struct mu3h_sch_ep_info *sch_ep, u32 offset)
+{
+	u32 max_bw = 0;
+	u32 bw;
+	int i, j, k;
+
+	for (i = 0; i < sch_ep->num_esit; i++) {
+		u32 base = offset + i * sch_ep->esit;
+
+		for (j = 0; j < sch_ep->num_budget_microframes; j++) {
+			k = XHCI_MTK_BW_INDEX(base + j);
+			bw = sch_bw->bus_bw[k] + sch_ep->bw_cost_per_microframe;
+			if (bw > max_bw)
+				max_bw = bw;
+		}
+	}
+	return max_bw;
+}
+
+static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw,
+	struct mu3h_sch_ep_info *sch_ep, bool used)
+{
+	int bw_updated;
+	u32 base;
+	int i, j;
+
+	bw_updated = sch_ep->bw_cost_per_microframe * (used ? 1 : -1);
+
+	for (i = 0; i < sch_ep->num_esit; i++) {
+		base = sch_ep->offset + i * sch_ep->esit;
+		for (j = 0; j < sch_ep->num_budget_microframes; j++)
+			sch_bw->bus_bw[XHCI_MTK_BW_INDEX(base + j)] += bw_updated;
+	}
+}
+
+static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset)
+{
+	struct mu3h_sch_tt *tt = sch_ep->sch_tt;
+	u32 tmp;
+	int base;
+	int i, j, k;
+
+	for (i = 0; i < sch_ep->num_esit; i++) {
+		base = offset + i * sch_ep->esit;
+
+		/*
+		 * Compared with hs bus, no matter what ep type,
+		 * the hub will always delay one uframe to send data
+		 */
+		for (j = 0; j < sch_ep->num_budget_microframes; j++) {
+			k = XHCI_MTK_BW_INDEX(base + j);
+			tmp = tt->fs_bus_bw[k] + sch_ep->bw_cost_per_microframe;
+			if (tmp > FS_PAYLOAD_MAX)
+				return -ESCH_BW_OVERFLOW;
+		}
+	}
+
+	return 0;
+}
+
+static int check_sch_tt(struct mu3h_sch_ep_info *sch_ep, u32 offset)
+{
+	u32 start_ss, last_ss;
+	u32 start_cs, last_cs;
+
+	if (!sch_ep->sch_tt)
+		return 0;
+
+	start_ss = offset % 8;
+
+	if (sch_ep->ep_type == ISOC_OUT_EP) {
+		last_ss = start_ss + sch_ep->cs_count - 1;
+
+		/*
+		 * usb_20 spec section11.18:
+		 * must never schedule Start-Split in Y6
+		 */
+		if (!(start_ss == 7 || last_ss < 6))
+			return -ESCH_SS_Y6;
+
+	} else {
+		u32 cs_count = DIV_ROUND_UP(sch_ep->maxpkt, FS_PAYLOAD_MAX);
+
+		/*
+		 * usb_20 spec section11.18:
+		 * must never schedule Start-Split in Y6
+		 */
+		if (start_ss == 6)
+			return -ESCH_SS_Y6;
+
+		/* one uframe for ss + one uframe for idle */
+		start_cs = (start_ss + 2) % 8;
+		last_cs = start_cs + cs_count - 1;
+
+		if (last_cs > 7)
+			return -ESCH_CS_OVERFLOW;
+
+		if (cs_count > 7)
+			cs_count = 7; /* HW limit */
+
+		sch_ep->cs_count = cs_count;
+		/* ss, idle are ignored */
+		sch_ep->num_budget_microframes = cs_count;
+
+		/*
+		 * if interval=1, maxp >752, num_budge_micoframe is larger
+		 * than sch_ep->esit, will overstep boundary
+		 */
+		if (sch_ep->num_budget_microframes > sch_ep->esit)
+			sch_ep->num_budget_microframes = sch_ep->esit;
+	}
+
+	return check_fs_bus_bw(sch_ep, offset);
+}
+
+static void update_sch_tt(struct mu3h_sch_ep_info *sch_ep, bool used)
+{
+	struct mu3h_sch_tt *tt = sch_ep->sch_tt;
+	int bw_updated;
+	u32 base;
+	int i, j;
+
+	bw_updated = sch_ep->bw_cost_per_microframe * (used ? 1 : -1);
+
+	for (i = 0; i < sch_ep->num_esit; i++) {
+		base = sch_ep->offset + i * sch_ep->esit;
+
+		for (j = 0; j < sch_ep->num_budget_microframes; j++)
+			tt->fs_bus_bw[XHCI_MTK_BW_INDEX(base + j)] += bw_updated;
+	}
+
+	if (used)
+		list_add_tail(&sch_ep->tt_endpoint, &tt->ep_list);
+	else
+		list_del(&sch_ep->tt_endpoint);
+}
+
+static int load_ep_bw(struct mu3h_sch_bw_info *sch_bw,
+		      struct mu3h_sch_ep_info *sch_ep, bool loaded)
+{
+	if (sch_ep->sch_tt)
+		update_sch_tt(sch_ep, loaded);
+
+	/* update bus bandwidth info */
+	update_bus_bw(sch_bw, sch_ep, loaded);
+	sch_ep->allocated = loaded;
+
+	return 0;
+}
+
+static int check_sch_bw(struct mu3h_sch_ep_info *sch_ep)
+{
+	struct mu3h_sch_bw_info *sch_bw = sch_ep->bw_info;
+	const u32 bw_boundary = get_bw_boundary(sch_ep->speed);
+	u32 offset;
+	u32 worst_bw;
+	u32 min_bw = ~0;
+	int min_index = -1;
+	int ret = 0;
+
+	/*
+	 * Search through all possible schedule microframes.
+	 * and find a microframe where its worst bandwidth is minimum.
+	 */
+	for (offset = 0; offset < sch_ep->esit; offset++) {
+		ret = check_sch_tt(sch_ep, offset);
+		if (ret)
+			continue;
+
+		worst_bw = get_max_bw(sch_bw, sch_ep, offset);
+		if (worst_bw > bw_boundary)
+			continue;
+
+		if (min_bw > worst_bw) {
+			min_bw = worst_bw;
+			min_index = offset;
+		}
+
+		/* use first-fit for LS/FS */
+		if (sch_ep->sch_tt && min_index >= 0)
+			break;
+
+		if (min_bw == 0)
+			break;
+	}
+
+	if (min_index < 0)
+		return ret ? ret : -ESCH_BW_OVERFLOW;
+
+	sch_ep->offset = min_index;
+
+	return load_ep_bw(sch_bw, sch_ep, true);
+}
+
+static void destroy_sch_ep(struct xhci_hcd_mtk *mtk, struct usb_device *udev,
+			   struct mu3h_sch_ep_info *sch_ep)
+{
+	/* only release ep bw check passed by check_sch_bw() */
+	if (sch_ep->allocated)
+		load_ep_bw(sch_ep->bw_info, sch_ep, false);
+
+	if (sch_ep->sch_tt)
+		drop_tt(udev);
+
+	list_del(&sch_ep->endpoint);
+	hlist_del(&sch_ep->hentry);
+	kfree(sch_ep);
+}
+
+static bool need_bw_sch(struct usb_device *udev,
+			struct usb_host_endpoint *ep)
+{
+	bool has_tt = udev->tt && udev->tt->hub->parent;
+
+	/* only for periodic endpoints */
+	if (usb_endpoint_xfer_control(&ep->desc)
+		|| usb_endpoint_xfer_bulk(&ep->desc))
+		return false;
+
+	/*
+	 * for LS & FS periodic endpoints which its device is not behind
+	 * a TT are also ignored, root-hub will schedule them directly,
+	 * but need set @bpkts field of endpoint context to 1.
+	 */
+	if (is_fs_or_ls(udev->speed) && !has_tt)
+		return false;
+
+	/* skip endpoint with zero maxpkt */
+	if (usb_endpoint_maxp(&ep->desc) == 0)
+		return false;
+
+	return true;
+}
+
+int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(mtk->hcd);
+	struct mu3h_sch_bw_info *sch_array;
+	int num_usb_bus;
+
+	/* ss IN and OUT are separated */
+	num_usb_bus = xhci->usb3_rhub.num_ports * 2 + xhci->usb2_rhub.num_ports;
+
+	sch_array = kcalloc(num_usb_bus, sizeof(*sch_array), GFP_KERNEL);
+	if (sch_array == NULL)
+		return -ENOMEM;
+
+	mtk->sch_array = sch_array;
+
+	INIT_LIST_HEAD(&mtk->bw_ep_chk_list);
+	hash_init(mtk->sch_ep_hash);
+
+	return 0;
+}
+
+void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk)
+{
+	kfree(mtk->sch_array);
+}
+
+static int add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
+			struct usb_host_endpoint *ep)
+{
+	struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct xhci_ep_ctx *ep_ctx;
+	struct xhci_virt_device *virt_dev;
+	struct mu3h_sch_ep_info *sch_ep;
+	unsigned int ep_index;
+
+	virt_dev = xhci->devs[udev->slot_id];
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
+
+	if (!need_bw_sch(udev, ep)) {
+		/*
+		 * set @bpkts to 1 if it is LS or FS periodic endpoint, and its
+		 * device does not connected through an external HS hub
+		 */
+		if (usb_endpoint_xfer_int(&ep->desc)
+			|| usb_endpoint_xfer_isoc(&ep->desc))
+			ep_ctx->reserved[0] = cpu_to_le32(EP_BPKTS(1));
+
+		return 0;
+	}
+
+	xhci_dbg(xhci, "%s %s\n", __func__, decode_ep(ep, udev->speed));
+
+	sch_ep = create_sch_ep(mtk, udev, ep);
+	if (IS_ERR_OR_NULL(sch_ep))
+		return -ENOMEM;
+
+	setup_sch_info(ep_ctx, sch_ep);
+
+	list_add_tail(&sch_ep->endpoint, &mtk->bw_ep_chk_list);
+	hash_add(mtk->sch_ep_hash, &sch_ep->hentry, (unsigned long)ep);
+
+	return 0;
+}
+
+static void drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
+			  struct usb_host_endpoint *ep)
+{
+	struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct mu3h_sch_ep_info *sch_ep;
+	struct hlist_node *hn;
+
+	if (!need_bw_sch(udev, ep))
+		return;
+
+	xhci_dbg(xhci, "%s %s\n", __func__, decode_ep(ep, udev->speed));
+
+	hash_for_each_possible_safe(mtk->sch_ep_hash, sch_ep,
+				    hn, hentry, (unsigned long)ep) {
+		if (sch_ep->ep == ep) {
+			destroy_sch_ep(mtk, udev, sch_ep);
+			break;
+		}
+	}
+}
+
+int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct xhci_virt_device *virt_dev = xhci->devs[udev->slot_id];
+	struct mu3h_sch_ep_info *sch_ep;
+	int ret;
+
+	xhci_dbg(xhci, "%s() udev %s\n", __func__, dev_name(&udev->dev));
+
+	list_for_each_entry(sch_ep, &mtk->bw_ep_chk_list, endpoint) {
+		struct xhci_ep_ctx *ep_ctx;
+		struct usb_host_endpoint *ep = sch_ep->ep;
+		unsigned int ep_index = xhci_get_endpoint_index(&ep->desc);
+
+		ret = check_sch_bw(sch_ep);
+		if (ret) {
+			xhci_err(xhci, "Not enough bandwidth! (%s)\n",
+				 sch_error_string(-ret));
+			return -ENOSPC;
+		}
+
+		ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
+		ep_ctx->reserved[0] = cpu_to_le32(EP_BPKTS(sch_ep->pkts)
+			| EP_BCSCOUNT(sch_ep->cs_count)
+			| EP_BBM(sch_ep->burst_mode));
+		ep_ctx->reserved[1] = cpu_to_le32(EP_BOFFSET(sch_ep->offset)
+			| EP_BREPEAT(sch_ep->repeat));
+
+		xhci_dbg(xhci, " PKTS:%x, CSCOUNT:%x, BM:%x, OFFSET:%x, REPEAT:%x\n",
+			sch_ep->pkts, sch_ep->cs_count, sch_ep->burst_mode,
+			sch_ep->offset, sch_ep->repeat);
+	}
+
+	ret = xhci_check_bandwidth(hcd, udev);
+	if (!ret)
+		list_del_init(&mtk->bw_ep_chk_list);
+
+	return ret;
+}
+
+void xhci_mtk_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct mu3h_sch_ep_info *sch_ep, *tmp;
+
+	xhci_dbg(xhci, "%s() udev %s\n", __func__, dev_name(&udev->dev));
+
+	list_for_each_entry_safe(sch_ep, tmp, &mtk->bw_ep_chk_list, endpoint)
+		destroy_sch_ep(mtk, udev, sch_ep);
+
+	xhci_reset_bandwidth(hcd, udev);
+}
+
+int xhci_mtk_add_ep(struct usb_hcd *hcd, struct usb_device *udev,
+		    struct usb_host_endpoint *ep)
+{
+	int ret;
+
+	ret = xhci_add_endpoint(hcd, udev, ep);
+	if (ret)
+		return ret;
+
+	if (ep->hcpriv)
+		ret = add_ep_quirk(hcd, udev, ep);
+
+	return ret;
+}
+
+int xhci_mtk_drop_ep(struct usb_hcd *hcd, struct usb_device *udev,
+		     struct usb_host_endpoint *ep)
+{
+	int ret;
+
+	ret = xhci_drop_endpoint(hcd, udev, ep);
+	if (ret)
+		return ret;
+
+	/* needn't check @ep->hcpriv, xhci_endpoint_disable set it NULL */
+	drop_ep_quirk(hcd, udev, ep);
+
+	return 0;
+}
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
new file mode 100644
index 000000000..bb4f80627
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk.c
@@ -0,0 +1,866 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MediaTek xHCI Host Controller Driver
+ *
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author:
+ *  Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/dma-mapping.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+
+#include "xhci.h"
+#include "xhci-mtk.h"
+
+/* ip_pw_ctrl0 register */
+#define CTRL0_IP_SW_RST	BIT(0)
+
+/* ip_pw_ctrl1 register */
+#define CTRL1_IP_HOST_PDN	BIT(0)
+
+/* ip_pw_ctrl2 register */
+#define CTRL2_IP_DEV_PDN	BIT(0)
+
+/* ip_pw_sts1 register */
+#define STS1_IP_SLEEP_STS	BIT(30)
+#define STS1_U3_MAC_RST	BIT(16)
+#define STS1_XHCI_RST		BIT(11)
+#define STS1_SYS125_RST	BIT(10)
+#define STS1_REF_RST		BIT(8)
+#define STS1_SYSPLL_STABLE	BIT(0)
+
+/* ip_xhci_cap register */
+#define CAP_U3_PORT_NUM(p)	((p) & 0xff)
+#define CAP_U2_PORT_NUM(p)	(((p) >> 8) & 0xff)
+
+/* u3_ctrl_p register */
+#define CTRL_U3_PORT_HOST_SEL	BIT(2)
+#define CTRL_U3_PORT_PDN	BIT(1)
+#define CTRL_U3_PORT_DIS	BIT(0)
+
+/* u2_ctrl_p register */
+#define CTRL_U2_PORT_HOST_SEL	BIT(2)
+#define CTRL_U2_PORT_PDN	BIT(1)
+#define CTRL_U2_PORT_DIS	BIT(0)
+
+/* u2_phy_pll register */
+#define CTRL_U2_FORCE_PLL_STB	BIT(28)
+
+/* xHCI CSR */
+#define LS_EOF_CFG		0x930
+#define LSEOF_OFFSET		0x89
+
+#define FS_EOF_CFG		0x934
+#define FSEOF_OFFSET		0x2e
+
+#define SS_GEN1_EOF_CFG		0x93c
+#define SSG1EOF_OFFSET		0x78
+
+#define HFCNTR_CFG		0x944
+#define ITP_DELTA_CLK		(0xa << 1)
+#define ITP_DELTA_CLK_MASK	GENMASK(5, 1)
+#define FRMCNT_LEV1_RANG	(0x12b << 8)
+#define FRMCNT_LEV1_RANG_MASK	GENMASK(19, 8)
+
+#define HSCH_CFG1		0x960
+#define SCH3_RXFIFO_DEPTH_MASK	GENMASK(21, 20)
+
+#define SS_GEN2_EOF_CFG		0x990
+#define SSG2EOF_OFFSET		0x3c
+
+#define XSEOF_OFFSET_MASK	GENMASK(11, 0)
+
+/* usb remote wakeup registers in syscon */
+
+/* mt8173 etc */
+#define PERI_WK_CTRL1	0x4
+#define WC1_IS_C(x)	(((x) & 0xf) << 26)  /* cycle debounce */
+#define WC1_IS_EN	BIT(25)
+#define WC1_IS_P	BIT(6)  /* polarity for ip sleep */
+
+/* mt8183 */
+#define PERI_WK_CTRL0	0x0
+#define WC0_IS_C(x)	((u32)(((x) & 0xf) << 28))  /* cycle debounce */
+#define WC0_IS_P	BIT(12)	/* polarity */
+#define WC0_IS_EN	BIT(6)
+
+/* mt8192 */
+#define WC0_SSUSB0_CDEN		BIT(6)
+#define WC0_IS_SPM_EN		BIT(1)
+
+/* mt8195 */
+#define PERI_WK_CTRL0_8195	0x04
+#define WC0_IS_P_95		BIT(30)	/* polarity */
+#define WC0_IS_C_95(x)		((u32)(((x) & 0x7) << 27))
+#define WC0_IS_EN_P3_95		BIT(26)
+#define WC0_IS_EN_P2_95		BIT(25)
+#define WC0_IS_EN_P1_95		BIT(24)
+
+#define PERI_WK_CTRL1_8195	0x20
+#define WC1_IS_C_95(x)		((u32)(((x) & 0xf) << 28))
+#define WC1_IS_P_95		BIT(12)
+#define WC1_IS_EN_P0_95		BIT(6)
+
+/* mt2712 etc */
+#define PERI_SSUSB_SPM_CTRL	0x0
+#define SSC_IP_SLEEP_EN	BIT(4)
+#define SSC_SPM_INT_EN		BIT(1)
+
+#define SCH_FIFO_TO_KB(x)	((x) >> 10)
+
+enum ssusb_uwk_vers {
+	SSUSB_UWK_V1 = 1,
+	SSUSB_UWK_V2,
+	SSUSB_UWK_V1_1 = 101,	/* specific revision 1.01 */
+	SSUSB_UWK_V1_2,		/* specific revision 1.2 */
+	SSUSB_UWK_V1_3,		/* mt8195 IP0 */
+	SSUSB_UWK_V1_4,		/* mt8195 IP1 */
+	SSUSB_UWK_V1_5,		/* mt8195 IP2 */
+	SSUSB_UWK_V1_6,		/* mt8195 IP3 */
+};
+
+/*
+ * MT8195 has 4 controllers, the controller1~3's default SOF/ITP interval
+ * is calculated from the frame counter clock 24M, but in fact, the clock
+ * is 48M, add workaround for it.
+ */
+static void xhci_mtk_set_frame_interval(struct xhci_hcd_mtk *mtk)
+{
+	struct device *dev = mtk->dev;
+	struct usb_hcd *hcd = mtk->hcd;
+	u32 value;
+
+	if (!of_device_is_compatible(dev->of_node, "mediatek,mt8195-xhci"))
+		return;
+
+	value = readl(hcd->regs + HFCNTR_CFG);
+	value &= ~(ITP_DELTA_CLK_MASK | FRMCNT_LEV1_RANG_MASK);
+	value |= (ITP_DELTA_CLK | FRMCNT_LEV1_RANG);
+	writel(value, hcd->regs + HFCNTR_CFG);
+
+	value = readl(hcd->regs + LS_EOF_CFG);
+	value &= ~XSEOF_OFFSET_MASK;
+	value |= LSEOF_OFFSET;
+	writel(value, hcd->regs + LS_EOF_CFG);
+
+	value = readl(hcd->regs + FS_EOF_CFG);
+	value &= ~XSEOF_OFFSET_MASK;
+	value |= FSEOF_OFFSET;
+	writel(value, hcd->regs + FS_EOF_CFG);
+
+	value = readl(hcd->regs + SS_GEN1_EOF_CFG);
+	value &= ~XSEOF_OFFSET_MASK;
+	value |= SSG1EOF_OFFSET;
+	writel(value, hcd->regs + SS_GEN1_EOF_CFG);
+
+	value = readl(hcd->regs + SS_GEN2_EOF_CFG);
+	value &= ~XSEOF_OFFSET_MASK;
+	value |= SSG2EOF_OFFSET;
+	writel(value, hcd->regs + SS_GEN2_EOF_CFG);
+}
+
+/*
+ * workaround: usb3.2 gen1 isoc rx hw issue
+ * host send out unexpected ACK afer device fininsh a burst transfer with
+ * a short packet.
+ */
+static void xhci_mtk_rxfifo_depth_set(struct xhci_hcd_mtk *mtk)
+{
+	struct usb_hcd *hcd = mtk->hcd;
+	u32 value;
+
+	if (!mtk->rxfifo_depth)
+		return;
+
+	value = readl(hcd->regs + HSCH_CFG1);
+	value &= ~SCH3_RXFIFO_DEPTH_MASK;
+	value |= FIELD_PREP(SCH3_RXFIFO_DEPTH_MASK,
+			    SCH_FIFO_TO_KB(mtk->rxfifo_depth) - 1);
+	writel(value, hcd->regs + HSCH_CFG1);
+}
+
+static void xhci_mtk_init_quirk(struct xhci_hcd_mtk *mtk)
+{
+	/* workaround only for mt8195 */
+	xhci_mtk_set_frame_interval(mtk);
+
+	/* workaround for SoCs using SSUSB about before IPM v1.6.0 */
+	xhci_mtk_rxfifo_depth_set(mtk);
+}
+
+static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
+{
+	struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
+	u32 value, check_val;
+	int u3_ports_disabled = 0;
+	int ret;
+	int i;
+
+	if (!mtk->has_ippc)
+		return 0;
+
+	/* power on host ip */
+	value = readl(&ippc->ip_pw_ctr1);
+	value &= ~CTRL1_IP_HOST_PDN;
+	writel(value, &ippc->ip_pw_ctr1);
+
+	/* power on and enable u3 ports except skipped ones */
+	for (i = 0; i < mtk->num_u3_ports; i++) {
+		if ((0x1 << i) & mtk->u3p_dis_msk) {
+			u3_ports_disabled++;
+			continue;
+		}
+
+		value = readl(&ippc->u3_ctrl_p[i]);
+		value &= ~(CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS);
+		value |= CTRL_U3_PORT_HOST_SEL;
+		writel(value, &ippc->u3_ctrl_p[i]);
+	}
+
+	/* power on and enable all u2 ports except skipped ones */
+	for (i = 0; i < mtk->num_u2_ports; i++) {
+		if (BIT(i) & mtk->u2p_dis_msk)
+			continue;
+
+		value = readl(&ippc->u2_ctrl_p[i]);
+		value &= ~(CTRL_U2_PORT_PDN | CTRL_U2_PORT_DIS);
+		value |= CTRL_U2_PORT_HOST_SEL;
+		writel(value, &ippc->u2_ctrl_p[i]);
+	}
+
+	/*
+	 * wait for clocks to be stable, and clock domains reset to
+	 * be inactive after power on and enable ports
+	 */
+	check_val = STS1_SYSPLL_STABLE | STS1_REF_RST |
+			STS1_SYS125_RST | STS1_XHCI_RST;
+
+	if (mtk->num_u3_ports > u3_ports_disabled)
+		check_val |= STS1_U3_MAC_RST;
+
+	ret = readl_poll_timeout(&ippc->ip_pw_sts1, value,
+			  (check_val == (value & check_val)), 100, 20000);
+	if (ret) {
+		dev_err(mtk->dev, "clocks are not stable (0x%x)\n", value);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int xhci_mtk_host_disable(struct xhci_hcd_mtk *mtk)
+{
+	struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
+	u32 value;
+	int ret;
+	int i;
+
+	if (!mtk->has_ippc)
+		return 0;
+
+	/* power down u3 ports except skipped ones */
+	for (i = 0; i < mtk->num_u3_ports; i++) {
+		if ((0x1 << i) & mtk->u3p_dis_msk)
+			continue;
+
+		value = readl(&ippc->u3_ctrl_p[i]);
+		value |= CTRL_U3_PORT_PDN;
+		writel(value, &ippc->u3_ctrl_p[i]);
+	}
+
+	/* power down all u2 ports except skipped ones */
+	for (i = 0; i < mtk->num_u2_ports; i++) {
+		if (BIT(i) & mtk->u2p_dis_msk)
+			continue;
+
+		value = readl(&ippc->u2_ctrl_p[i]);
+		value |= CTRL_U2_PORT_PDN;
+		writel(value, &ippc->u2_ctrl_p[i]);
+	}
+
+	/* power down host ip */
+	value = readl(&ippc->ip_pw_ctr1);
+	value |= CTRL1_IP_HOST_PDN;
+	writel(value, &ippc->ip_pw_ctr1);
+
+	/* wait for host ip to sleep */
+	ret = readl_poll_timeout(&ippc->ip_pw_sts1, value,
+			  (value & STS1_IP_SLEEP_STS), 100, 100000);
+	if (ret)
+		dev_err(mtk->dev, "ip sleep failed!!!\n");
+	else /* workaound for platforms using low level latch */
+		usleep_range(100, 200);
+
+	return ret;
+}
+
+static int xhci_mtk_ssusb_config(struct xhci_hcd_mtk *mtk)
+{
+	struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
+	u32 value;
+
+	if (!mtk->has_ippc)
+		return 0;
+
+	/* reset whole ip */
+	value = readl(&ippc->ip_pw_ctr0);
+	value |= CTRL0_IP_SW_RST;
+	writel(value, &ippc->ip_pw_ctr0);
+	udelay(1);
+	value = readl(&ippc->ip_pw_ctr0);
+	value &= ~CTRL0_IP_SW_RST;
+	writel(value, &ippc->ip_pw_ctr0);
+
+	/*
+	 * device ip is default power-on in fact
+	 * power down device ip, otherwise ip-sleep will fail
+	 */
+	value = readl(&ippc->ip_pw_ctr2);
+	value |= CTRL2_IP_DEV_PDN;
+	writel(value, &ippc->ip_pw_ctr2);
+
+	value = readl(&ippc->ip_xhci_cap);
+	mtk->num_u3_ports = CAP_U3_PORT_NUM(value);
+	mtk->num_u2_ports = CAP_U2_PORT_NUM(value);
+	dev_dbg(mtk->dev, "%s u2p:%d, u3p:%d\n", __func__,
+			mtk->num_u2_ports, mtk->num_u3_ports);
+
+	return xhci_mtk_host_enable(mtk);
+}
+
+/* only clocks can be turn off for ip-sleep wakeup mode */
+static void usb_wakeup_ip_sleep_set(struct xhci_hcd_mtk *mtk, bool enable)
+{
+	u32 reg, msk, val;
+
+	switch (mtk->uwk_vers) {
+	case SSUSB_UWK_V1:
+		reg = mtk->uwk_reg_base + PERI_WK_CTRL1;
+		msk = WC1_IS_EN | WC1_IS_C(0xf) | WC1_IS_P;
+		val = enable ? (WC1_IS_EN | WC1_IS_C(0x8)) : 0;
+		break;
+	case SSUSB_UWK_V1_1:
+		reg = mtk->uwk_reg_base + PERI_WK_CTRL0;
+		msk = WC0_IS_EN | WC0_IS_C(0xf) | WC0_IS_P;
+		val = enable ? (WC0_IS_EN | WC0_IS_C(0x1)) : 0;
+		break;
+	case SSUSB_UWK_V1_2:
+		reg = mtk->uwk_reg_base + PERI_WK_CTRL0;
+		msk = WC0_SSUSB0_CDEN | WC0_IS_SPM_EN;
+		val = enable ? msk : 0;
+		break;
+	case SSUSB_UWK_V1_3:
+		reg = mtk->uwk_reg_base + PERI_WK_CTRL1_8195;
+		msk = WC1_IS_EN_P0_95 | WC1_IS_C_95(0xf) | WC1_IS_P_95;
+		val = enable ? (WC1_IS_EN_P0_95 | WC1_IS_C_95(0x1)) : 0;
+		break;
+	case SSUSB_UWK_V1_4:
+		reg = mtk->uwk_reg_base + PERI_WK_CTRL0_8195;
+		msk = WC0_IS_EN_P1_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
+		val = enable ? (WC0_IS_EN_P1_95 | WC0_IS_C_95(0x1)) : 0;
+		break;
+	case SSUSB_UWK_V1_5:
+		reg = mtk->uwk_reg_base + PERI_WK_CTRL0_8195;
+		msk = WC0_IS_EN_P2_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
+		val = enable ? (WC0_IS_EN_P2_95 | WC0_IS_C_95(0x1)) : 0;
+		break;
+	case SSUSB_UWK_V1_6:
+		reg = mtk->uwk_reg_base + PERI_WK_CTRL0_8195;
+		msk = WC0_IS_EN_P3_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
+		val = enable ? (WC0_IS_EN_P3_95 | WC0_IS_C_95(0x1)) : 0;
+		break;
+	case SSUSB_UWK_V2:
+		reg = mtk->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
+		msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
+		val = enable ? msk : 0;
+		break;
+	default:
+		return;
+	}
+	regmap_update_bits(mtk->uwk, reg, msk, val);
+}
+
+static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk,
+				struct device_node *dn)
+{
+	struct of_phandle_args args;
+	int ret;
+
+	/* Wakeup function is optional */
+	mtk->uwk_en = of_property_read_bool(dn, "wakeup-source");
+	if (!mtk->uwk_en)
+		return 0;
+
+	ret = of_parse_phandle_with_fixed_args(dn,
+				"mediatek,syscon-wakeup", 2, 0, &args);
+	if (ret)
+		return ret;
+
+	mtk->uwk_reg_base = args.args[0];
+	mtk->uwk_vers = args.args[1];
+	mtk->uwk = syscon_node_to_regmap(args.np);
+	of_node_put(args.np);
+	dev_info(mtk->dev, "uwk - reg:0x%x, version:%d\n",
+			mtk->uwk_reg_base, mtk->uwk_vers);
+
+	return PTR_ERR_OR_ZERO(mtk->uwk);
+}
+
+static void usb_wakeup_set(struct xhci_hcd_mtk *mtk, bool enable)
+{
+	if (mtk->uwk_en)
+		usb_wakeup_ip_sleep_set(mtk, enable);
+}
+
+static int xhci_mtk_clks_get(struct xhci_hcd_mtk *mtk)
+{
+	struct clk_bulk_data *clks = mtk->clks;
+
+	clks[0].id = "sys_ck";
+	clks[1].id = "xhci_ck";
+	clks[2].id = "ref_ck";
+	clks[3].id = "mcu_ck";
+	clks[4].id = "dma_ck";
+
+	return devm_clk_bulk_get_optional(mtk->dev, BULK_CLKS_NUM, clks);
+}
+
+static int xhci_mtk_vregs_get(struct xhci_hcd_mtk *mtk)
+{
+	struct regulator_bulk_data *supplies = mtk->supplies;
+
+	supplies[0].supply = "vbus";
+	supplies[1].supply = "vusb33";
+
+	return devm_regulator_bulk_get(mtk->dev, BULK_VREGS_NUM, supplies);
+}
+
+static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci)
+{
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
+
+	/*
+	 * As of now platform drivers don't provide MSI support so we ensure
+	 * here that the generic code does not try to make a pci_dev from our
+	 * dev struct in order to setup MSI
+	 */
+	xhci->quirks |= XHCI_PLAT;
+	xhci->quirks |= XHCI_MTK_HOST;
+	/*
+	 * MTK host controller gives a spurious successful event after a
+	 * short transfer. Ignore it.
+	 */
+	xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
+	if (mtk->lpm_support)
+		xhci->quirks |= XHCI_LPM_SUPPORT;
+	if (mtk->u2_lpm_disable)
+		xhci->quirks |= XHCI_HW_LPM_DISABLE;
+
+	/*
+	 * MTK xHCI 0.96: PSA is 1 by default even if doesn't support stream,
+	 * and it's 3 when support it.
+	 */
+	if (xhci->hci_version < 0x100 && HCC_MAX_PSA(xhci->hcc_params) == 4)
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
+}
+
+/* called during probe() after chip reset completes */
+static int xhci_mtk_setup(struct usb_hcd *hcd)
+{
+	struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
+	int ret;
+
+	if (usb_hcd_is_primary_hcd(hcd)) {
+		ret = xhci_mtk_ssusb_config(mtk);
+		if (ret)
+			return ret;
+
+		xhci_mtk_init_quirk(mtk);
+	}
+
+	ret = xhci_gen_setup(hcd, xhci_mtk_quirks);
+	if (ret)
+		return ret;
+
+	if (usb_hcd_is_primary_hcd(hcd))
+		ret = xhci_mtk_sch_init(mtk);
+
+	return ret;
+}
+
+static const struct xhci_driver_overrides xhci_mtk_overrides __initconst = {
+	.reset = xhci_mtk_setup,
+	.add_endpoint = xhci_mtk_add_ep,
+	.drop_endpoint = xhci_mtk_drop_ep,
+	.check_bandwidth = xhci_mtk_check_bandwidth,
+	.reset_bandwidth = xhci_mtk_reset_bandwidth,
+};
+
+static struct hc_driver __read_mostly xhci_mtk_hc_driver;
+
+static int xhci_mtk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct xhci_hcd_mtk *mtk;
+	const struct hc_driver *driver;
+	struct xhci_hcd *xhci;
+	struct resource *res;
+	struct usb_hcd *hcd;
+	int ret = -ENODEV;
+	int wakeup_irq;
+	int irq;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	driver = &xhci_mtk_hc_driver;
+	mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL);
+	if (!mtk)
+		return -ENOMEM;
+
+	mtk->dev = dev;
+
+	ret = xhci_mtk_vregs_get(mtk);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+	ret = xhci_mtk_clks_get(mtk);
+	if (ret)
+		return ret;
+
+	irq = platform_get_irq_byname_optional(pdev, "host");
+	if (irq < 0) {
+		if (irq == -EPROBE_DEFER)
+			return irq;
+
+		/* for backward compatibility */
+		irq = platform_get_irq(pdev, 0);
+		if (irq < 0)
+			return irq;
+	}
+
+	wakeup_irq = platform_get_irq_byname_optional(pdev, "wakeup");
+	if (wakeup_irq == -EPROBE_DEFER)
+		return wakeup_irq;
+
+	mtk->lpm_support = of_property_read_bool(node, "usb3-lpm-capable");
+	mtk->u2_lpm_disable = of_property_read_bool(node, "usb2-lpm-disable");
+	/* optional property, ignore the error if it does not exist */
+	of_property_read_u32(node, "mediatek,u3p-dis-msk",
+			     &mtk->u3p_dis_msk);
+	of_property_read_u32(node, "mediatek,u2p-dis-msk",
+			     &mtk->u2p_dis_msk);
+
+	of_property_read_u32(node, "rx-fifo-depth", &mtk->rxfifo_depth);
+
+	ret = usb_wakeup_of_property_parse(mtk, node);
+	if (ret) {
+		dev_err(dev, "failed to parse uwk property\n");
+		return ret;
+	}
+
+	pm_runtime_set_active(dev);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_autosuspend_delay(dev, 4000);
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	ret = regulator_bulk_enable(BULK_VREGS_NUM, mtk->supplies);
+	if (ret)
+		goto disable_pm;
+
+	ret = clk_bulk_prepare_enable(BULK_CLKS_NUM, mtk->clks);
+	if (ret)
+		goto disable_ldos;
+
+	ret = device_reset_optional(dev);
+	if (ret) {
+		dev_err_probe(dev, ret, "failed to reset controller\n");
+		goto disable_clk;
+	}
+
+	hcd = usb_create_hcd(driver, dev, dev_name(dev));
+	if (!hcd) {
+		ret = -ENOMEM;
+		goto disable_clk;
+	}
+
+	/*
+	 * USB 2.0 roothub is stored in the platform_device.
+	 * Swap it with mtk HCD.
+	 */
+	mtk->hcd = platform_get_drvdata(pdev);
+	platform_set_drvdata(pdev, mtk);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac");
+	hcd->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(hcd->regs)) {
+		ret = PTR_ERR(hcd->regs);
+		goto put_usb2_hcd;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ippc");
+	if (res) {	/* ippc register is optional */
+		mtk->ippc_regs = devm_ioremap_resource(dev, res);
+		if (IS_ERR(mtk->ippc_regs)) {
+			ret = PTR_ERR(mtk->ippc_regs);
+			goto put_usb2_hcd;
+		}
+		mtk->has_ippc = true;
+	}
+
+	device_init_wakeup(dev, true);
+	dma_set_max_seg_size(dev, UINT_MAX);
+
+	xhci = hcd_to_xhci(hcd);
+	xhci->main_hcd = hcd;
+
+	/*
+	 * imod_interval is the interrupt moderation value in nanoseconds.
+	 * The increment interval is 8 times as much as that defined in
+	 * the xHCI spec on MTK's controller.
+	 */
+	xhci->imod_interval = 5000;
+	device_property_read_u32(dev, "imod-interval-ns", &xhci->imod_interval);
+
+	xhci->shared_hcd = usb_create_shared_hcd(driver, dev,
+			dev_name(dev), hcd);
+	if (!xhci->shared_hcd) {
+		ret = -ENOMEM;
+		goto disable_device_wakeup;
+	}
+
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (ret)
+		goto put_usb3_hcd;
+
+	if (HCC_MAX_PSA(xhci->hcc_params) >= 4 &&
+	    !(xhci->quirks & XHCI_BROKEN_STREAMS))
+		xhci->shared_hcd->can_do_streams = 1;
+
+	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
+	if (ret)
+		goto dealloc_usb2_hcd;
+
+	if (wakeup_irq > 0) {
+		ret = dev_pm_set_dedicated_wake_irq_reverse(dev, wakeup_irq);
+		if (ret) {
+			dev_err(dev, "set wakeup irq %d failed\n", wakeup_irq);
+			goto dealloc_usb3_hcd;
+		}
+		dev_info(dev, "wakeup irq %d\n", wakeup_irq);
+	}
+
+	device_enable_async_suspend(dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+	pm_runtime_forbid(dev);
+
+	return 0;
+
+dealloc_usb3_hcd:
+	usb_remove_hcd(xhci->shared_hcd);
+
+dealloc_usb2_hcd:
+	usb_remove_hcd(hcd);
+
+put_usb3_hcd:
+	xhci_mtk_sch_exit(mtk);
+	usb_put_hcd(xhci->shared_hcd);
+
+disable_device_wakeup:
+	device_init_wakeup(dev, false);
+
+put_usb2_hcd:
+	usb_put_hcd(hcd);
+
+disable_clk:
+	clk_bulk_disable_unprepare(BULK_CLKS_NUM, mtk->clks);
+
+disable_ldos:
+	regulator_bulk_disable(BULK_VREGS_NUM, mtk->supplies);
+
+disable_pm:
+	pm_runtime_put_noidle(dev);
+	pm_runtime_disable(dev);
+	return ret;
+}
+
+static int xhci_mtk_remove(struct platform_device *pdev)
+{
+	struct xhci_hcd_mtk *mtk = platform_get_drvdata(pdev);
+	struct usb_hcd	*hcd = mtk->hcd;
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct usb_hcd  *shared_hcd = xhci->shared_hcd;
+	struct device *dev = &pdev->dev;
+
+	pm_runtime_get_sync(dev);
+	xhci->xhc_state |= XHCI_STATE_REMOVING;
+	dev_pm_clear_wake_irq(dev);
+	device_init_wakeup(dev, false);
+
+	usb_remove_hcd(shared_hcd);
+	xhci->shared_hcd = NULL;
+	usb_remove_hcd(hcd);
+	usb_put_hcd(shared_hcd);
+	usb_put_hcd(hcd);
+	xhci_mtk_sch_exit(mtk);
+	clk_bulk_disable_unprepare(BULK_CLKS_NUM, mtk->clks);
+	regulator_bulk_disable(BULK_VREGS_NUM, mtk->supplies);
+
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
+	pm_runtime_set_suspended(dev);
+
+	return 0;
+}
+
+static int __maybe_unused xhci_mtk_suspend(struct device *dev)
+{
+	struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev);
+	struct usb_hcd *hcd = mtk->hcd;
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	int ret;
+
+	xhci_dbg(xhci, "%s: stop port polling\n", __func__);
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	del_timer_sync(&hcd->rh_timer);
+	clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+	del_timer_sync(&xhci->shared_hcd->rh_timer);
+
+	ret = xhci_mtk_host_disable(mtk);
+	if (ret)
+		goto restart_poll_rh;
+
+	clk_bulk_disable_unprepare(BULK_CLKS_NUM, mtk->clks);
+	usb_wakeup_set(mtk, true);
+	return 0;
+
+restart_poll_rh:
+	xhci_dbg(xhci, "%s: restart port polling\n", __func__);
+	set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+	usb_hcd_poll_rh_status(xhci->shared_hcd);
+	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	usb_hcd_poll_rh_status(hcd);
+	return ret;
+}
+
+static int __maybe_unused xhci_mtk_resume(struct device *dev)
+{
+	struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev);
+	struct usb_hcd *hcd = mtk->hcd;
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	int ret;
+
+	usb_wakeup_set(mtk, false);
+	ret = clk_bulk_prepare_enable(BULK_CLKS_NUM, mtk->clks);
+	if (ret)
+		goto enable_wakeup;
+
+	ret = xhci_mtk_host_enable(mtk);
+	if (ret)
+		goto disable_clks;
+
+	xhci_dbg(xhci, "%s: restart port polling\n", __func__);
+	set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+	usb_hcd_poll_rh_status(xhci->shared_hcd);
+	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	usb_hcd_poll_rh_status(hcd);
+	return 0;
+
+disable_clks:
+	clk_bulk_disable_unprepare(BULK_CLKS_NUM, mtk->clks);
+enable_wakeup:
+	usb_wakeup_set(mtk, true);
+	return ret;
+}
+
+static int __maybe_unused xhci_mtk_runtime_suspend(struct device *dev)
+{
+	struct xhci_hcd_mtk  *mtk = dev_get_drvdata(dev);
+	struct xhci_hcd *xhci = hcd_to_xhci(mtk->hcd);
+	int ret = 0;
+
+	if (xhci->xhc_state)
+		return -ESHUTDOWN;
+
+	if (device_may_wakeup(dev))
+		ret = xhci_mtk_suspend(dev);
+
+	/* -EBUSY: let PM automatically reschedule another autosuspend */
+	return ret ? -EBUSY : 0;
+}
+
+static int __maybe_unused xhci_mtk_runtime_resume(struct device *dev)
+{
+	struct xhci_hcd_mtk  *mtk = dev_get_drvdata(dev);
+	struct xhci_hcd *xhci = hcd_to_xhci(mtk->hcd);
+	int ret = 0;
+
+	if (xhci->xhc_state)
+		return -ESHUTDOWN;
+
+	if (device_may_wakeup(dev))
+		ret = xhci_mtk_resume(dev);
+
+	return ret;
+}
+
+static const struct dev_pm_ops xhci_mtk_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume)
+	SET_RUNTIME_PM_OPS(xhci_mtk_runtime_suspend,
+			   xhci_mtk_runtime_resume, NULL)
+};
+
+#define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &xhci_mtk_pm_ops : NULL)
+
+static const struct of_device_id mtk_xhci_of_match[] = {
+	{ .compatible = "mediatek,mt8173-xhci"},
+	{ .compatible = "mediatek,mt8195-xhci"},
+	{ .compatible = "mediatek,mtk-xhci"},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mtk_xhci_of_match);
+
+static struct platform_driver mtk_xhci_driver = {
+	.probe	= xhci_mtk_probe,
+	.remove	= xhci_mtk_remove,
+	.driver	= {
+		.name = "xhci-mtk",
+		.pm = DEV_PM_OPS,
+		.of_match_table = mtk_xhci_of_match,
+	},
+};
+
+static int __init xhci_mtk_init(void)
+{
+	xhci_init_driver(&xhci_mtk_hc_driver, &xhci_mtk_overrides);
+	return platform_driver_register(&mtk_xhci_driver);
+}
+module_init(xhci_mtk_init);
+
+static void __exit xhci_mtk_exit(void)
+{
+	platform_driver_unregister(&mtk_xhci_driver);
+}
+module_exit(xhci_mtk_exit);
+
+MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek xHCI Host Controller Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
new file mode 100644
index 000000000..2a6a47d0f
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk.h
@@ -0,0 +1,181 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author:
+ *  Zhigang.Wei <zhigang.wei@mediatek.com>
+ *  Chunfeng.Yun <chunfeng.yun@mediatek.com>
+ */
+
+#ifndef _XHCI_MTK_H_
+#define _XHCI_MTK_H_
+
+#include <linux/clk.h>
+#include <linux/hashtable.h>
+#include <linux/regulator/consumer.h>
+
+#include "xhci.h"
+
+#define BULK_CLKS_NUM	5
+#define BULK_VREGS_NUM	2
+
+/* support at most 64 ep, use 32 size hash table */
+#define SCH_EP_HASH_BITS	5
+
+/**
+ * To simplify scheduler algorithm, set a upper limit for ESIT,
+ * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT,
+ * round down to the limit value, that means allocating more
+ * bandwidth to it.
+ */
+#define XHCI_MTK_MAX_ESIT	(1 << 6)
+#define XHCI_MTK_BW_INDEX(x)	((x) & (XHCI_MTK_MAX_ESIT - 1))
+
+/**
+ * @fs_bus_bw: array to keep track of bandwidth already used for FS
+ * @ep_list: Endpoints using this TT
+ */
+struct mu3h_sch_tt {
+	u32 fs_bus_bw[XHCI_MTK_MAX_ESIT];
+	struct list_head ep_list;
+};
+
+/**
+ * struct mu3h_sch_bw_info: schedule information for bandwidth domain
+ *
+ * @bus_bw: array to keep track of bandwidth already used at each uframes
+ *
+ * treat a HS root port as a bandwidth domain, but treat a SS root port as
+ * two bandwidth domains, one for IN eps and another for OUT eps.
+ */
+struct mu3h_sch_bw_info {
+	u32 bus_bw[XHCI_MTK_MAX_ESIT];
+};
+
+/**
+ * struct mu3h_sch_ep_info: schedule information for endpoint
+ *
+ * @esit: unit is 125us, equal to 2 << Interval field in ep-context
+ * @num_esit: number of @esit in a period
+ * @num_budget_microframes: number of continuous uframes
+ *		(@repeat==1) scheduled within the interval
+ * @bw_cost_per_microframe: bandwidth cost per microframe
+ * @hentry: hash table entry
+ * @endpoint: linked into bandwidth domain which it belongs to
+ * @tt_endpoint: linked into mu3h_sch_tt's list which it belongs to
+ * @bw_info: bandwidth domain which this endpoint belongs
+ * @sch_tt: mu3h_sch_tt linked into
+ * @ep_type: endpoint type
+ * @maxpkt: max packet size of endpoint
+ * @ep: address of usb_host_endpoint struct
+ * @allocated: the bandwidth is aready allocated from bus_bw
+ * @offset: which uframe of the interval that transfer should be
+ *		scheduled first time within the interval
+ * @repeat: the time gap between two uframes that transfers are
+ *		scheduled within a interval. in the simple algorithm, only
+ *		assign 0 or 1 to it; 0 means using only one uframe in a
+ *		interval, and 1 means using @num_budget_microframes
+ *		continuous uframes
+ * @pkts: number of packets to be transferred in the scheduled uframes
+ * @cs_count: number of CS that host will trigger
+ * @burst_mode: burst mode for scheduling. 0: normal burst mode,
+ *		distribute the bMaxBurst+1 packets for a single burst
+ *		according to @pkts and @repeat, repeate the burst multiple
+ *		times; 1: distribute the (bMaxBurst+1)*(Mult+1) packets
+ *		according to @pkts and @repeat. normal mode is used by
+ *		default
+ */
+struct mu3h_sch_ep_info {
+	u32 esit;
+	u32 num_esit;
+	u32 num_budget_microframes;
+	u32 bw_cost_per_microframe;
+	struct list_head endpoint;
+	struct hlist_node hentry;
+	struct list_head tt_endpoint;
+	struct mu3h_sch_bw_info *bw_info;
+	struct mu3h_sch_tt *sch_tt;
+	u32 ep_type;
+	u32 maxpkt;
+	struct usb_host_endpoint *ep;
+	enum usb_device_speed speed;
+	bool allocated;
+	/*
+	 * mtk xHCI scheduling information put into reserved DWs
+	 * in ep context
+	 */
+	u32 offset;
+	u32 repeat;
+	u32 pkts;
+	u32 cs_count;
+	u32 burst_mode;
+};
+
+#define MU3C_U3_PORT_MAX 4
+#define MU3C_U2_PORT_MAX 5
+
+/**
+ * struct mu3c_ippc_regs: MTK ssusb ip port control registers
+ * @ip_pw_ctr0~3: ip power and clock control registers
+ * @ip_pw_sts1~2: ip power and clock status registers
+ * @ip_xhci_cap: ip xHCI capability register
+ * @u3_ctrl_p[x]: ip usb3 port x control register, only low 4bytes are used
+ * @u2_ctrl_p[x]: ip usb2 port x control register, only low 4bytes are used
+ * @u2_phy_pll: usb2 phy pll control register
+ */
+struct mu3c_ippc_regs {
+	__le32 ip_pw_ctr0;
+	__le32 ip_pw_ctr1;
+	__le32 ip_pw_ctr2;
+	__le32 ip_pw_ctr3;
+	__le32 ip_pw_sts1;
+	__le32 ip_pw_sts2;
+	__le32 reserved0[3];
+	__le32 ip_xhci_cap;
+	__le32 reserved1[2];
+	__le64 u3_ctrl_p[MU3C_U3_PORT_MAX];
+	__le64 u2_ctrl_p[MU3C_U2_PORT_MAX];
+	__le32 reserved2;
+	__le32 u2_phy_pll;
+	__le32 reserved3[33]; /* 0x80 ~ 0xff */
+};
+
+struct xhci_hcd_mtk {
+	struct device *dev;
+	struct usb_hcd *hcd;
+	struct mu3h_sch_bw_info *sch_array;
+	struct list_head bw_ep_chk_list;
+	DECLARE_HASHTABLE(sch_ep_hash, SCH_EP_HASH_BITS);
+	struct mu3c_ippc_regs __iomem *ippc_regs;
+	int num_u2_ports;
+	int num_u3_ports;
+	int u2p_dis_msk;
+	int u3p_dis_msk;
+	struct clk_bulk_data clks[BULK_CLKS_NUM];
+	struct regulator_bulk_data supplies[BULK_VREGS_NUM];
+	unsigned int has_ippc:1;
+	unsigned int lpm_support:1;
+	unsigned int u2_lpm_disable:1;
+	/* usb remote wakeup */
+	unsigned int uwk_en:1;
+	struct regmap *uwk;
+	u32 uwk_reg_base;
+	u32 uwk_vers;
+	/* quirk */
+	u32 rxfifo_depth;
+};
+
+static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd)
+{
+	return dev_get_drvdata(hcd->self.controller);
+}
+
+int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk);
+void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk);
+int xhci_mtk_add_ep(struct usb_hcd *hcd, struct usb_device *udev,
+		    struct usb_host_endpoint *ep);
+int xhci_mtk_drop_ep(struct usb_hcd *hcd, struct usb_device *udev,
+		     struct usb_host_endpoint *ep);
+int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
+void xhci_mtk_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
+
+#endif		/* _XHCI_MTK_H_ */
diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c
new file mode 100644
index 000000000..87f1597a0
--- /dev/null
+++ b/drivers/usb/host/xhci-mvebu.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014 Marvell
+ * Author: Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+
+#include <linux/io.h>
+#include <linux/mbus.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "xhci-mvebu.h"
+#include "xhci.h"
+
+#define USB3_MAX_WINDOWS	4
+#define USB3_WIN_CTRL(w)	(0x0 + ((w) * 8))
+#define USB3_WIN_BASE(w)	(0x4 + ((w) * 8))
+
+static void xhci_mvebu_mbus_config(void __iomem *base,
+			const struct mbus_dram_target_info *dram)
+{
+	int win;
+
+	/* Clear all existing windows */
+	for (win = 0; win < USB3_MAX_WINDOWS; win++) {
+		writel(0, base + USB3_WIN_CTRL(win));
+		writel(0, base + USB3_WIN_BASE(win));
+	}
+
+	/* Program each DRAM CS in a seperate window */
+	for (win = 0; win < dram->num_cs; win++) {
+		const struct mbus_dram_window *cs = &dram->cs[win];
+
+		writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
+		       (dram->mbus_dram_target_id << 4) | 1,
+		       base + USB3_WIN_CTRL(win));
+
+		writel((cs->base & 0xffff0000), base + USB3_WIN_BASE(win));
+	}
+}
+
+int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd)
+{
+	struct device *dev = hcd->self.controller;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct resource	*res;
+	void __iomem *base;
+	const struct mbus_dram_target_info *dram;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res)
+		return -ENODEV;
+
+	/*
+	 * We don't use devm_ioremap() because this mapping should
+	 * only exists for the duration of this probe function.
+	 */
+	base = ioremap(res->start, resource_size(res));
+	if (!base)
+		return -ENODEV;
+
+	dram = mv_mbus_dram_info();
+	xhci_mvebu_mbus_config(base, dram);
+
+	/*
+	 * This memory area was only needed to configure the MBus
+	 * windows, and is therefore no longer useful.
+	 */
+	iounmap(base);
+
+	return 0;
+}
+
+int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+
+	/* Without reset on resume, the HC won't work at all */
+	xhci->quirks |= XHCI_RESET_ON_RESUME;
+
+	return 0;
+}
diff --git a/drivers/usb/host/xhci-mvebu.h b/drivers/usb/host/xhci-mvebu.h
new file mode 100644
index 000000000..3be021793
--- /dev/null
+++ b/drivers/usb/host/xhci-mvebu.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ */
+
+#ifndef __LINUX_XHCI_MVEBU_H
+#define __LINUX_XHCI_MVEBU_H
+
+struct usb_hcd;
+
+#if IS_ENABLED(CONFIG_USB_XHCI_MVEBU)
+int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd);
+int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd);
+#else
+static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd)
+{
+	return 0;
+}
+
+static inline int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd)
+{
+	return 0;
+}
+#endif
+#endif /* __LINUX_XHCI_MVEBU_H */
diff --git a/drivers/usb/host/xhci-pci-renesas.c b/drivers/usb/host/xhci-pci-renesas.c
new file mode 100644
index 000000000..93f8b355b
--- /dev/null
+++ b/drivers/usb/host/xhci-pci-renesas.c
@@ -0,0 +1,630 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2019-2020 Linaro Limited */
+
+#include <linux/acpi.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+
+#include "xhci.h"
+#include "xhci-trace.h"
+#include "xhci-pci.h"
+
+#define RENESAS_FW_VERSION				0x6C
+#define RENESAS_ROM_CONFIG				0xF0
+#define RENESAS_FW_STATUS				0xF4
+#define RENESAS_FW_STATUS_MSB				0xF5
+#define RENESAS_ROM_STATUS				0xF6
+#define RENESAS_ROM_STATUS_MSB				0xF7
+#define RENESAS_DATA0					0xF8
+#define RENESAS_DATA1					0xFC
+
+#define RENESAS_FW_VERSION_FIELD			GENMASK(23, 7)
+#define RENESAS_FW_VERSION_OFFSET			8
+
+#define RENESAS_FW_STATUS_DOWNLOAD_ENABLE		BIT(0)
+#define RENESAS_FW_STATUS_LOCK				BIT(1)
+#define RENESAS_FW_STATUS_RESULT			GENMASK(6, 4)
+  #define RENESAS_FW_STATUS_INVALID			0
+  #define RENESAS_FW_STATUS_SUCCESS			BIT(4)
+  #define RENESAS_FW_STATUS_ERROR			BIT(5)
+#define RENESAS_FW_STATUS_SET_DATA0			BIT(8)
+#define RENESAS_FW_STATUS_SET_DATA1			BIT(9)
+
+#define RENESAS_ROM_STATUS_ACCESS			BIT(0)
+#define RENESAS_ROM_STATUS_ERASE			BIT(1)
+#define RENESAS_ROM_STATUS_RELOAD			BIT(2)
+#define RENESAS_ROM_STATUS_RESULT			GENMASK(6, 4)
+  #define RENESAS_ROM_STATUS_NO_RESULT			0
+  #define RENESAS_ROM_STATUS_SUCCESS			BIT(4)
+  #define RENESAS_ROM_STATUS_ERROR			BIT(5)
+#define RENESAS_ROM_STATUS_SET_DATA0			BIT(8)
+#define RENESAS_ROM_STATUS_SET_DATA1			BIT(9)
+#define RENESAS_ROM_STATUS_ROM_EXISTS			BIT(15)
+
+#define RENESAS_ROM_ERASE_MAGIC				0x5A65726F
+#define RENESAS_ROM_WRITE_MAGIC				0x53524F4D
+
+#define RENESAS_RETRY	10000
+#define RENESAS_DELAY	10
+
+static int renesas_fw_download_image(struct pci_dev *dev,
+				     const u32 *fw, size_t step, bool rom)
+{
+	size_t i;
+	int err;
+	u8 fw_status;
+	bool data0_or_data1;
+	u32 status_reg;
+
+	if (rom)
+		status_reg = RENESAS_ROM_STATUS_MSB;
+	else
+		status_reg = RENESAS_FW_STATUS_MSB;
+
+	/*
+	 * The hardware does alternate between two 32-bit pages.
+	 * (This is because each row of the firmware is 8 bytes).
+	 *
+	 * for even steps we use DATA0, for odd steps DATA1.
+	 */
+	data0_or_data1 = (step & 1) == 1;
+
+	/* step+1. Read "Set DATAX" and confirm it is cleared. */
+	for (i = 0; i < RENESAS_RETRY; i++) {
+		err = pci_read_config_byte(dev, status_reg, &fw_status);
+		if (err) {
+			dev_err(&dev->dev, "Read Status failed: %d\n",
+				pcibios_err_to_errno(err));
+			return pcibios_err_to_errno(err);
+		}
+		if (!(fw_status & BIT(data0_or_data1)))
+			break;
+
+		udelay(RENESAS_DELAY);
+	}
+	if (i == RENESAS_RETRY) {
+		dev_err(&dev->dev, "Timeout for Set DATAX step: %zd\n", step);
+		return -ETIMEDOUT;
+	}
+
+	/*
+	 * step+2. Write FW data to "DATAX".
+	 * "LSB is left" => force little endian
+	 */
+	err = pci_write_config_dword(dev, data0_or_data1 ?
+				     RENESAS_DATA1 : RENESAS_DATA0,
+				     (__force u32)cpu_to_le32(fw[step]));
+	if (err) {
+		dev_err(&dev->dev, "Write to DATAX failed: %d\n",
+			pcibios_err_to_errno(err));
+		return pcibios_err_to_errno(err);
+	}
+
+	udelay(100);
+
+	/* step+3. Set "Set DATAX". */
+	err = pci_write_config_byte(dev, status_reg, BIT(data0_or_data1));
+	if (err) {
+		dev_err(&dev->dev, "Write config for DATAX failed: %d\n",
+			pcibios_err_to_errno(err));
+		return pcibios_err_to_errno(err);
+	}
+
+	return 0;
+}
+
+static int renesas_fw_verify(const void *fw_data,
+			     size_t length)
+{
+	u16 fw_version_pointer;
+
+	/*
+	 * The Firmware's Data Format is describe in
+	 * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124
+	 */
+
+	/*
+	 * The bootrom chips of the big brother have sizes up to 64k, let's
+	 * assume that's the biggest the firmware can get.
+	 */
+	if (length < 0x1000 || length >= 0x10000) {
+		pr_err("firmware is size %zd is not (4k - 64k).",
+			length);
+		return -EINVAL;
+	}
+
+	/* The First 2 bytes are fixed value (55aa). "LSB on Left" */
+	if (get_unaligned_le16(fw_data) != 0x55aa) {
+		pr_err("no valid firmware header found.");
+		return -EINVAL;
+	}
+
+	/* verify the firmware version position and print it. */
+	fw_version_pointer = get_unaligned_le16(fw_data + 4);
+	if (fw_version_pointer + 2 >= length) {
+		pr_err("fw ver pointer is outside of the firmware image");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static bool renesas_check_rom(struct pci_dev *pdev)
+{
+	u16 rom_status;
+	int retval;
+
+	/* Check if external ROM exists */
+	retval = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_status);
+	if (retval)
+		return false;
+
+	rom_status &= RENESAS_ROM_STATUS_ROM_EXISTS;
+	if (rom_status) {
+		dev_dbg(&pdev->dev, "External ROM exists\n");
+		return true; /* External ROM exists */
+	}
+
+	return false;
+}
+
+static int renesas_check_rom_state(struct pci_dev *pdev)
+{
+	u16 rom_state;
+	u32 version;
+	int err;
+
+	/* check FW version */
+	err = pci_read_config_dword(pdev, RENESAS_FW_VERSION, &version);
+	if (err)
+		return pcibios_err_to_errno(err);
+
+	version &= RENESAS_FW_VERSION_FIELD;
+	version = version >> RENESAS_FW_VERSION_OFFSET;
+	dev_dbg(&pdev->dev, "Found ROM version: %x\n", version);
+
+	/*
+	 * Test if ROM is present and loaded, if so we can skip everything
+	 */
+	err = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_state);
+	if (err)
+		return pcibios_err_to_errno(err);
+
+	if (rom_state & RENESAS_ROM_STATUS_ROM_EXISTS) {
+		/* ROM exists */
+		dev_dbg(&pdev->dev, "ROM exists\n");
+
+		/* Check the "Result Code" Bits (6:4) and act accordingly */
+		switch (rom_state & RENESAS_ROM_STATUS_RESULT) {
+		case RENESAS_ROM_STATUS_SUCCESS:
+			return 0;
+
+		case RENESAS_ROM_STATUS_NO_RESULT: /* No result yet */
+			dev_dbg(&pdev->dev, "Unknown ROM status ...\n");
+			return -ENOENT;
+
+		case RENESAS_ROM_STATUS_ERROR: /* Error State */
+		default: /* All other states are marked as "Reserved states" */
+			dev_err(&pdev->dev, "Invalid ROM..");
+			break;
+		}
+	}
+
+	return -EIO;
+}
+
+static int renesas_fw_check_running(struct pci_dev *pdev)
+{
+	u8 fw_state;
+	int err;
+
+	/*
+	 * Test if the device is actually needing the firmware. As most
+	 * BIOSes will initialize the device for us. If the device is
+	 * initialized.
+	 */
+	err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state);
+	if (err)
+		return pcibios_err_to_errno(err);
+
+	/*
+	 * Check if "FW Download Lock" is locked. If it is and the FW is
+	 * ready we can simply continue. If the FW is not ready, we have
+	 * to give up.
+	 */
+	if (fw_state & RENESAS_FW_STATUS_LOCK) {
+		dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
+
+		if (fw_state & RENESAS_FW_STATUS_SUCCESS)
+			return 0;
+
+		dev_err(&pdev->dev,
+			"FW Download Lock is set and FW is not ready. Giving Up.");
+		return -EIO;
+	}
+
+	/*
+	 * Check if "FW Download Enable" is set. If someone (us?) tampered
+	 * with it and it can't be reset, we have to give up too... and
+	 * ask for a forgiveness and a reboot.
+	 */
+	if (fw_state & RENESAS_FW_STATUS_DOWNLOAD_ENABLE) {
+		dev_err(&pdev->dev,
+			"FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
+		return -EIO;
+	}
+
+	/* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
+	switch (fw_state & RENESAS_FW_STATUS_RESULT) {
+	case 0: /* No result yet */
+		dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
+
+		/* tell the caller, that this device needs the firmware. */
+		return 1;
+
+	case RENESAS_FW_STATUS_SUCCESS: /* Success, device should be working. */
+		dev_dbg(&pdev->dev, "FW is ready.");
+		return 0;
+
+	case RENESAS_FW_STATUS_ERROR: /* Error State */
+		dev_err(&pdev->dev,
+			"hardware is in an error state. Giving up (poweroff/reboot needed).");
+		return -ENODEV;
+
+	default: /* All other states are marked as "Reserved states" */
+		dev_err(&pdev->dev,
+			"hardware is in an invalid state %lx. Giving up (poweroff/reboot needed).",
+			(fw_state & RENESAS_FW_STATUS_RESULT) >> 4);
+		return -EINVAL;
+	}
+}
+
+static int renesas_fw_download(struct pci_dev *pdev,
+			       const struct firmware *fw)
+{
+	const u32 *fw_data = (const u32 *)fw->data;
+	size_t i;
+	int err;
+	u8 fw_status;
+
+	/*
+	 * For more information and the big picture: please look at the
+	 * "Firmware Download Sequence" in "7.1 FW Download Interface"
+	 * of R19UH0078EJ0500 Rev.5.00 page 131
+	 */
+
+	/*
+	 * 0. Set "FW Download Enable" bit in the
+	 * "FW Download Control & Status Register" at 0xF4
+	 */
+	err = pci_write_config_byte(pdev, RENESAS_FW_STATUS,
+				    RENESAS_FW_STATUS_DOWNLOAD_ENABLE);
+	if (err)
+		return pcibios_err_to_errno(err);
+
+	/* 1 - 10 follow one step after the other. */
+	for (i = 0; i < fw->size / 4; i++) {
+		err = renesas_fw_download_image(pdev, fw_data, i, false);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Firmware Download Step %zd failed at position %zd bytes with (%d).",
+				i, i * 4, err);
+			return err;
+		}
+	}
+
+	/*
+	 * This sequence continues until the last data is written to
+	 * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1"
+	 * is cleared by the hardware beforehand.
+	 */
+	for (i = 0; i < RENESAS_RETRY; i++) {
+		err = pci_read_config_byte(pdev, RENESAS_FW_STATUS_MSB,
+					   &fw_status);
+		if (err)
+			return pcibios_err_to_errno(err);
+		if (!(fw_status & (BIT(0) | BIT(1))))
+			break;
+
+		udelay(RENESAS_DELAY);
+	}
+	if (i == RENESAS_RETRY)
+		dev_warn(&pdev->dev, "Final Firmware Download step timed out.");
+
+	/*
+	 * 11. After finishing writing the last data of FW, the
+	 * System Software must clear "FW Download Enable"
+	 */
+	err = pci_write_config_byte(pdev, RENESAS_FW_STATUS, 0);
+	if (err)
+		return pcibios_err_to_errno(err);
+
+	/* 12. Read "Result Code" and confirm it is good. */
+	for (i = 0; i < RENESAS_RETRY; i++) {
+		err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_status);
+		if (err)
+			return pcibios_err_to_errno(err);
+		if (fw_status & RENESAS_FW_STATUS_SUCCESS)
+			break;
+
+		udelay(RENESAS_DELAY);
+	}
+	if (i == RENESAS_RETRY) {
+		/* Timed out / Error - let's see if we can fix this */
+		err = renesas_fw_check_running(pdev);
+		switch (err) {
+		case 0: /*
+			 * we shouldn't end up here.
+			 * maybe it took a little bit longer.
+			 * But all should be well?
+			 */
+			break;
+
+		case 1: /* (No result yet! */
+			dev_err(&pdev->dev, "FW Load timedout");
+			return -ETIMEDOUT;
+
+		default:
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static void renesas_rom_erase(struct pci_dev *pdev)
+{
+	int retval, i;
+	u8 status;
+
+	dev_dbg(&pdev->dev, "Performing ROM Erase...\n");
+	retval = pci_write_config_dword(pdev, RENESAS_DATA0,
+					RENESAS_ROM_ERASE_MAGIC);
+	if (retval) {
+		dev_err(&pdev->dev, "ROM erase, magic word write failed: %d\n",
+			pcibios_err_to_errno(retval));
+		return;
+	}
+
+	retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
+	if (retval) {
+		dev_err(&pdev->dev, "ROM status read failed: %d\n",
+			pcibios_err_to_errno(retval));
+		return;
+	}
+	status |= RENESAS_ROM_STATUS_ERASE;
+	retval = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, status);
+	if (retval) {
+		dev_err(&pdev->dev, "ROM erase set word write failed\n");
+		return;
+	}
+
+	/* sleep a bit while ROM is erased */
+	msleep(20);
+
+	for (i = 0; i < RENESAS_RETRY; i++) {
+		retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS,
+					      &status);
+		status &= RENESAS_ROM_STATUS_ERASE;
+		if (!status)
+			break;
+
+		mdelay(RENESAS_DELAY);
+	}
+
+	if (i == RENESAS_RETRY)
+		dev_dbg(&pdev->dev, "Chip erase timedout: %x\n", status);
+
+	dev_dbg(&pdev->dev, "ROM Erase... Done success\n");
+}
+
+static bool renesas_setup_rom(struct pci_dev *pdev, const struct firmware *fw)
+{
+	const u32 *fw_data = (const u32 *)fw->data;
+	int err, i;
+	u8 status;
+
+	/* 2. Write magic word to Data0 */
+	err = pci_write_config_dword(pdev, RENESAS_DATA0,
+				     RENESAS_ROM_WRITE_MAGIC);
+	if (err)
+		return false;
+
+	/* 3. Set External ROM access */
+	err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS,
+				    RENESAS_ROM_STATUS_ACCESS);
+	if (err)
+		goto remove_bypass;
+
+	/* 4. Check the result */
+	err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
+	if (err)
+		goto remove_bypass;
+	status &= GENMASK(6, 4);
+	if (status) {
+		dev_err(&pdev->dev,
+			"setting external rom failed: %x\n", status);
+		goto remove_bypass;
+	}
+
+	/* 5 to 16 Write FW to DATA0/1 while checking SetData0/1 */
+	for (i = 0; i < fw->size / 4; i++) {
+		err = renesas_fw_download_image(pdev, fw_data, i, true);
+		if (err) {
+			dev_err(&pdev->dev,
+				"ROM Download Step %d failed at position %d bytes with (%d)\n",
+				 i, i * 4, err);
+			goto remove_bypass;
+		}
+	}
+
+	/*
+	 * wait till DATA0/1 is cleared
+	 */
+	for (i = 0; i < RENESAS_RETRY; i++) {
+		err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS_MSB,
+					   &status);
+		if (err)
+			goto remove_bypass;
+		if (!(status & (BIT(0) | BIT(1))))
+			break;
+
+		udelay(RENESAS_DELAY);
+	}
+	if (i == RENESAS_RETRY) {
+		dev_err(&pdev->dev, "Final Firmware ROM Download step timed out\n");
+		goto remove_bypass;
+	}
+
+	/* 17. Remove bypass */
+	err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0);
+	if (err)
+		return false;
+
+	udelay(10);
+
+	/* 18. check result */
+	for (i = 0; i < RENESAS_RETRY; i++) {
+		err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
+		if (err) {
+			dev_err(&pdev->dev, "Read ROM status failed:%d\n",
+				pcibios_err_to_errno(err));
+			return false;
+		}
+		status &= RENESAS_ROM_STATUS_RESULT;
+		if (status ==  RENESAS_ROM_STATUS_SUCCESS) {
+			dev_dbg(&pdev->dev, "Download ROM success\n");
+			break;
+		}
+		udelay(RENESAS_DELAY);
+	}
+	if (i == RENESAS_RETRY) { /* Timed out */
+		dev_err(&pdev->dev,
+			"Download to external ROM TO: %x\n", status);
+		return false;
+	}
+
+	dev_dbg(&pdev->dev, "Download to external ROM succeeded\n");
+
+	/* Last step set Reload */
+	err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS,
+				    RENESAS_ROM_STATUS_RELOAD);
+	if (err) {
+		dev_err(&pdev->dev, "Set ROM execute failed: %d\n",
+			pcibios_err_to_errno(err));
+		return false;
+	}
+
+	/*
+	 * wait till Reload is cleared
+	 */
+	for (i = 0; i < RENESAS_RETRY; i++) {
+		err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
+		if (err)
+			return false;
+		if (!(status & RENESAS_ROM_STATUS_RELOAD))
+			break;
+
+		udelay(RENESAS_DELAY);
+	}
+	if (i == RENESAS_RETRY) {
+		dev_err(&pdev->dev, "ROM Exec timed out: %x\n", status);
+		return false;
+	}
+
+	return true;
+
+remove_bypass:
+	pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0);
+	return false;
+}
+
+static int renesas_load_fw(struct pci_dev *pdev, const struct firmware *fw)
+{
+	int err = 0;
+	bool rom;
+
+	/* Check if the device has external ROM */
+	rom = renesas_check_rom(pdev);
+	if (rom) {
+		/* perform chip erase first */
+		renesas_rom_erase(pdev);
+
+		/* lets try loading fw on ROM first */
+		rom = renesas_setup_rom(pdev, fw);
+		if (!rom) {
+			dev_dbg(&pdev->dev,
+				"ROM load failed, falling back on FW load\n");
+		} else {
+			dev_dbg(&pdev->dev,
+				"ROM load success\n");
+			goto exit;
+		}
+	}
+
+	err = renesas_fw_download(pdev, fw);
+
+exit:
+	if (err)
+		dev_err(&pdev->dev, "firmware failed to download (%d).", err);
+	return err;
+}
+
+int renesas_xhci_check_request_fw(struct pci_dev *pdev,
+				  const struct pci_device_id *id)
+{
+	struct xhci_driver_data *driver_data =
+			(struct xhci_driver_data *)id->driver_data;
+	const char *fw_name = driver_data->firmware;
+	const struct firmware *fw;
+	bool has_rom;
+	int err;
+
+	/* Check if device has ROM and loaded, if so skip everything */
+	has_rom = renesas_check_rom(pdev);
+	if (has_rom) {
+		err = renesas_check_rom_state(pdev);
+		if (!err)
+			return 0;
+		else if (err != -ENOENT)
+			has_rom = false;
+	}
+
+	err = renesas_fw_check_running(pdev);
+	/* Continue ahead, if the firmware is already running. */
+	if (!err)
+		return 0;
+
+	/* no firmware interface available */
+	if (err != 1)
+		return has_rom ? 0 : err;
+
+	pci_dev_get(pdev);
+	err = firmware_request_nowarn(&fw, fw_name, &pdev->dev);
+	pci_dev_put(pdev);
+	if (err) {
+		if (has_rom) {
+			dev_info(&pdev->dev, "failed to load firmware %s, fallback to ROM\n",
+				 fw_name);
+			return 0;
+		}
+		dev_err(&pdev->dev, "failed to load firmware %s: %d\n",
+			fw_name, err);
+		return err;
+	}
+
+	err = renesas_fw_verify(fw->data, fw->size);
+	if (err)
+		goto exit;
+
+	err = renesas_load_fw(pdev, fw);
+exit:
+	release_firmware(fw);
+	return err;
+}
+EXPORT_SYMBOL_GPL(renesas_xhci_check_request_fw);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
new file mode 100644
index 000000000..e02ef31da
--- /dev/null
+++ b/drivers/usb/host/xhci-pci.c
@@ -0,0 +1,769 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xHCI host controller driver PCI Bus Glue.
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ */
+
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/reset.h>
+#include <linux/suspend.h>
+
+#include "xhci.h"
+#include "xhci-trace.h"
+#include "xhci-pci.h"
+
+#define SSIC_PORT_NUM		2
+#define SSIC_PORT_CFG2		0x880c
+#define SSIC_PORT_CFG2_OFFSET	0x30
+#define PROG_DONE		(1 << 30)
+#define SSIC_PORT_UNUSED	(1 << 31)
+#define SPARSE_DISABLE_BIT	17
+#define SPARSE_CNTL_ENABLE	0xC12C
+
+/* Device for a quirk */
+#define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
+#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009	0x1009
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1100	0x1100
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400	0x1400
+
+#define PCI_VENDOR_ID_ETRON		0x1b6f
+#define PCI_DEVICE_ID_EJ168		0x7023
+
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI	0x8c31
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI	0x9cb1
+#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI		0x22b5
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI		0xa12f
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI	0x9d2f
+#define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI		0x0aa8
+#define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI		0x1aa8
+#define PCI_DEVICE_ID_INTEL_APL_XHCI			0x5aa8
+#define PCI_DEVICE_ID_INTEL_DNV_XHCI			0x19d0
+#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI	0x15b5
+#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI	0x15b6
+#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI	0x15c1
+#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI	0x15db
+#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI	0x15d4
+#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI		0x15e9
+#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI		0x15ec
+#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI		0x15f0
+#define PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI		0x8a13
+#define PCI_DEVICE_ID_INTEL_CML_XHCI			0xa3af
+#define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI		0x9a13
+#define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI		0x1138
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI		0x51ed
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI	0x54ed
+
+#define PCI_DEVICE_ID_AMD_RENOIR_XHCI			0x1639
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_4			0x43b9
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_3			0x43ba
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_2			0x43bb
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_1			0x43bc
+
+#define PCI_DEVICE_ID_ASMEDIA_1042_XHCI			0x1042
+#define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI		0x1142
+#define PCI_DEVICE_ID_ASMEDIA_1142_XHCI			0x1242
+#define PCI_DEVICE_ID_ASMEDIA_2142_XHCI			0x2142
+#define PCI_DEVICE_ID_ASMEDIA_3242_XHCI			0x3242
+
+static const char hcd_name[] = "xhci_hcd";
+
+static struct hc_driver __read_mostly xhci_pci_hc_driver;
+
+static int xhci_pci_setup(struct usb_hcd *hcd);
+static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
+				      struct usb_tt *tt, gfp_t mem_flags);
+
+static const struct xhci_driver_overrides xhci_pci_overrides __initconst = {
+	.reset = xhci_pci_setup,
+	.update_hub_device = xhci_pci_update_hub_device,
+};
+
+/* called after powerup, by probe or system-pm "wakeup" */
+static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
+{
+	/*
+	 * TODO: Implement finding debug ports later.
+	 * TODO: see if there are any quirks that need to be added to handle
+	 * new extended capabilities.
+	 */
+
+	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
+	if (!pci_set_mwi(pdev))
+		xhci_dbg(xhci, "MWI active\n");
+
+	xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
+	return 0;
+}
+
+static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
+{
+	struct pci_dev                  *pdev = to_pci_dev(dev);
+	struct xhci_driver_data         *driver_data;
+	const struct pci_device_id      *id;
+
+	id = pci_match_id(to_pci_driver(pdev->dev.driver)->id_table, pdev);
+
+	if (id && id->driver_data) {
+		driver_data = (struct xhci_driver_data *)id->driver_data;
+		xhci->quirks |= driver_data->quirks;
+	}
+
+	/* Look for vendor-specific quirks */
+	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
+			(pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
+			 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
+		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+				pdev->revision == 0x0) {
+			xhci->quirks |= XHCI_RESET_EP_QUIRK;
+			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"XHCI_RESET_EP_QUIRK for this evaluation HW is deprecated");
+		}
+		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+				pdev->revision == 0x4) {
+			xhci->quirks |= XHCI_SLOW_SUSPEND;
+			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"QUIRK: Fresco Logic xHC revision %u"
+				"must be suspended extra slowly",
+				pdev->revision);
+		}
+		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK)
+			xhci->quirks |= XHCI_BROKEN_STREAMS;
+		/* Fresco Logic confirms: all revisions of this chip do not
+		 * support MSI, even though some of them claim to in their PCI
+		 * capabilities.
+		 */
+		xhci->quirks |= XHCI_BROKEN_MSI;
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"QUIRK: Fresco Logic revision %u "
+				"has broken MSI implementation",
+				pdev->revision);
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+	}
+
+	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
+			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009)
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
+
+	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
+			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100)
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+
+	if (pdev->vendor == PCI_VENDOR_ID_NEC)
+		xhci->quirks |= XHCI_NEC_HOST;
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
+		xhci->quirks |= XHCI_AMD_0x96_HOST;
+
+	/* AMD PLL quirk */
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_quirk_pll_check())
+		xhci->quirks |= XHCI_AMD_PLL_FIX;
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+		(pdev->device == 0x145c ||
+		 pdev->device == 0x15e0 ||
+		 pdev->device == 0x15e1 ||
+		 pdev->device == 0x43bb))
+		xhci->quirks |= XHCI_SUSPEND_DELAY;
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+	    (pdev->device == 0x15e0 || pdev->device == 0x15e1))
+		xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND;
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5) {
+		xhci->quirks |= XHCI_DISABLE_SPARSE;
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+	}
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD)
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+
+	if ((pdev->vendor == PCI_VENDOR_ID_AMD) &&
+		((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) ||
+		(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_3) ||
+		(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2) ||
+		(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1)))
+		xhci->quirks |= XHCI_U2_DISABLE_WAKE;
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+		pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI)
+		xhci->quirks |= XHCI_BROKEN_D3COLD_S2I;
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
+		xhci->quirks |= XHCI_LPM_SUPPORT;
+		xhci->quirks |= XHCI_INTEL_HOST;
+		xhci->quirks |= XHCI_AVOID_BEI;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+			pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
+		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
+		xhci->limit_active_eps = 64;
+		xhci->quirks |= XHCI_SW_BW_CHECKING;
+		/*
+		 * PPT desktop boards DH77EB and DH77DF will power back on after
+		 * a few seconds of being shutdown.  The fix for this is to
+		 * switch the ports from xHCI to EHCI on shutdown.  We can't use
+		 * DMI information to find those particular boards (since each
+		 * vendor will change the board name), so we have to key off all
+		 * PPT chipsets.
+		 */
+		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		(pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI)) {
+		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
+		xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_CML_XHCI)) {
+		xhci->quirks |= XHCI_PME_STUCK_QUIRK;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+	    pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)
+		xhci->quirks |= XHCI_SSIC_PORT_UNUSED;
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+	    (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI))
+		xhci->quirks |= XHCI_INTEL_USB_ROLE_SW;
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+	    (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI))
+		xhci->quirks |= XHCI_MISSING_CAS;
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+	    (pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI))
+		xhci->quirks |= XHCI_RESET_TO_DEFAULT;
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+	    (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI))
+		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
+
+	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
+			pdev->device == PCI_DEVICE_ID_EJ168) {
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
+	    pdev->device == 0x0014) {
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+		xhci->quirks |= XHCI_ZERO_64B_REGS;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
+	    pdev->device == 0x0015) {
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+		xhci->quirks |= XHCI_ZERO_64B_REGS;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_VIA)
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+
+	/* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */
+	if (pdev->vendor == PCI_VENDOR_ID_VIA &&
+			pdev->device == 0x3432)
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
+
+	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483)
+		xhci->quirks |= XHCI_LPM_SUPPORT;
+
+	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) {
+		/*
+		 * try to tame the ASMedia 1042 controller which reports 0.96
+		 * but appears to behave more like 1.0
+		 */
+		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) {
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+		xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+	    (pdev->device == PCI_DEVICE_ID_ASMEDIA_1142_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_ASMEDIA_2142_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_ASMEDIA_3242_XHCI))
+		xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
+
+	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI)
+		xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL;
+
+	if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241)
+		xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7;
+
+	if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM ||
+	     pdev->vendor == PCI_VENDOR_ID_CAVIUM) &&
+	     pdev->device == 0x9026)
+		xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT;
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+	    (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2 ||
+	     pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4))
+		xhci->quirks |= XHCI_NO_SOFT_RETRY;
+
+	if (pdev->vendor == PCI_VENDOR_ID_ZHAOXIN) {
+		xhci->quirks |= XHCI_ZHAOXIN_HOST;
+
+		if (pdev->device == 0x9202) {
+			xhci->quirks |= XHCI_RESET_ON_RESUME;
+			xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH;
+		}
+
+		if (pdev->device == 0x9203)
+			xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH;
+	}
+
+	/* xHC spec requires PCI devices to support D3hot and D3cold */
+	if (xhci->hci_version >= 0x120)
+		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
+
+	if (xhci->quirks & XHCI_RESET_ON_RESUME)
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"QUIRK: Resetting on resume");
+}
+
+#ifdef CONFIG_ACPI
+static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
+{
+	static const guid_t intel_dsm_guid =
+		GUID_INIT(0xac340cb7, 0xe901, 0x45bf,
+			  0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23);
+	union acpi_object *obj;
+
+	obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), &intel_dsm_guid, 3, 1,
+				NULL);
+	ACPI_FREE(obj);
+}
+
+static void xhci_find_lpm_incapable_ports(struct usb_hcd *hcd, struct usb_device *hdev)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct xhci_hub *rhub = &xhci->usb3_rhub;
+	int ret;
+	int i;
+
+	/* This is not the usb3 roothub we are looking for */
+	if (hcd != rhub->hcd)
+		return;
+
+	if (hdev->maxchild > rhub->num_ports) {
+		dev_err(&hdev->dev, "USB3 roothub port number mismatch\n");
+		return;
+	}
+
+	for (i = 0; i < hdev->maxchild; i++) {
+		ret = usb_acpi_port_lpm_incapable(hdev, i);
+
+		dev_dbg(&hdev->dev, "port-%d disable U1/U2 _DSM: %d\n", i + 1, ret);
+
+		if (ret >= 0) {
+			rhub->ports[i]->lpm_incapable = ret;
+			continue;
+		}
+	}
+}
+
+#else
+static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
+static void xhci_find_lpm_incapable_ports(struct usb_hcd *hcd, struct usb_device *hdev) { }
+#endif /* CONFIG_ACPI */
+
+/* called during probe() after chip reset completes */
+static int xhci_pci_setup(struct usb_hcd *hcd)
+{
+	struct xhci_hcd		*xhci;
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+	int			retval;
+
+	xhci = hcd_to_xhci(hcd);
+	if (!xhci->sbrn)
+		pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
+
+	/* imod_interval is the interrupt moderation value in nanoseconds. */
+	xhci->imod_interval = 40000;
+
+	retval = xhci_gen_setup(hcd, xhci_pci_quirks);
+	if (retval)
+		return retval;
+
+	if (!usb_hcd_is_primary_hcd(hcd))
+		return 0;
+
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_acpi_rtd3_enable(pdev);
+
+	xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
+
+	/* Find any debug ports */
+	return xhci_pci_reinit(xhci, pdev);
+}
+
+static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
+				      struct usb_tt *tt, gfp_t mem_flags)
+{
+	/* Check if acpi claims some USB3 roothub ports are lpm incapable */
+	if (!hdev->parent)
+		xhci_find_lpm_incapable_ports(hcd, hdev);
+
+	return xhci_update_hub_device(hcd, hdev, tt, mem_flags);
+}
+
+/*
+ * We need to register our own PCI probe function (instead of the USB core's
+ * function) in order to create a second roothub under xHCI.
+ */
+static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int retval;
+	struct xhci_hcd *xhci;
+	struct usb_hcd *hcd;
+	struct xhci_driver_data *driver_data;
+	struct reset_control *reset;
+
+	driver_data = (struct xhci_driver_data *)id->driver_data;
+	if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) {
+		retval = renesas_xhci_check_request_fw(dev, id);
+		if (retval)
+			return retval;
+	}
+
+	reset = devm_reset_control_get_optional_exclusive(&dev->dev, NULL);
+	if (IS_ERR(reset))
+		return PTR_ERR(reset);
+	reset_control_reset(reset);
+
+	/* Prevent runtime suspending between USB-2 and USB-3 initialization */
+	pm_runtime_get_noresume(&dev->dev);
+
+	/* Register the USB 2.0 roothub.
+	 * FIXME: USB core must know to register the USB 2.0 roothub first.
+	 * This is sort of silly, because we could just set the HCD driver flags
+	 * to say USB 2.0, but I'm not sure what the implications would be in
+	 * the other parts of the HCD code.
+	 */
+	retval = usb_hcd_pci_probe(dev, &xhci_pci_hc_driver);
+
+	if (retval)
+		goto put_runtime_pm;
+
+	/* USB 2.0 roothub is stored in the PCI device now. */
+	hcd = dev_get_drvdata(&dev->dev);
+	xhci = hcd_to_xhci(hcd);
+	xhci->reset = reset;
+	xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev,
+						 pci_name(dev), hcd);
+	if (!xhci->shared_hcd) {
+		retval = -ENOMEM;
+		goto dealloc_usb2_hcd;
+	}
+
+	retval = xhci_ext_cap_init(xhci);
+	if (retval)
+		goto put_usb3_hcd;
+
+	retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
+			IRQF_SHARED);
+	if (retval)
+		goto put_usb3_hcd;
+	/* Roothub already marked as USB 3.0 speed */
+
+	if (!(xhci->quirks & XHCI_BROKEN_STREAMS) &&
+			HCC_MAX_PSA(xhci->hcc_params) >= 4)
+		xhci->shared_hcd->can_do_streams = 1;
+
+	/* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
+	pm_runtime_put_noidle(&dev->dev);
+
+	if (pci_choose_state(dev, PMSG_SUSPEND) == PCI_D0)
+		pm_runtime_forbid(&dev->dev);
+	else if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
+		pm_runtime_allow(&dev->dev);
+
+	dma_set_max_seg_size(&dev->dev, UINT_MAX);
+
+	return 0;
+
+put_usb3_hcd:
+	usb_put_hcd(xhci->shared_hcd);
+dealloc_usb2_hcd:
+	usb_hcd_pci_remove(dev);
+put_runtime_pm:
+	pm_runtime_put_noidle(&dev->dev);
+	return retval;
+}
+
+static void xhci_pci_remove(struct pci_dev *dev)
+{
+	struct xhci_hcd *xhci;
+
+	xhci = hcd_to_xhci(pci_get_drvdata(dev));
+
+	xhci->xhc_state |= XHCI_STATE_REMOVING;
+
+	if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
+		pm_runtime_forbid(&dev->dev);
+
+	if (xhci->shared_hcd) {
+		usb_remove_hcd(xhci->shared_hcd);
+		usb_put_hcd(xhci->shared_hcd);
+		xhci->shared_hcd = NULL;
+	}
+
+	/* Workaround for spurious wakeups at shutdown with HSW */
+	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+		pci_set_power_state(dev, PCI_D3hot);
+
+	usb_hcd_pci_remove(dev);
+}
+
+#ifdef CONFIG_PM
+/*
+ * In some Intel xHCI controllers, in order to get D3 working,
+ * through a vendor specific SSIC CONFIG register at offset 0x883c,
+ * SSIC PORT need to be marked as "unused" before putting xHCI
+ * into D3. After D3 exit, the SSIC port need to be marked as "used".
+ * Without this change, xHCI might not enter D3 state.
+ */
+static void xhci_ssic_port_unused_quirk(struct usb_hcd *hcd, bool suspend)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	u32 val;
+	void __iomem *reg;
+	int i;
+
+	for (i = 0; i < SSIC_PORT_NUM; i++) {
+		reg = (void __iomem *) xhci->cap_regs +
+				SSIC_PORT_CFG2 +
+				i * SSIC_PORT_CFG2_OFFSET;
+
+		/* Notify SSIC that SSIC profile programming is not done. */
+		val = readl(reg) & ~PROG_DONE;
+		writel(val, reg);
+
+		/* Mark SSIC port as unused(suspend) or used(resume) */
+		val = readl(reg);
+		if (suspend)
+			val |= SSIC_PORT_UNUSED;
+		else
+			val &= ~SSIC_PORT_UNUSED;
+		writel(val, reg);
+
+		/* Notify SSIC that SSIC profile programming is done */
+		val = readl(reg) | PROG_DONE;
+		writel(val, reg);
+		readl(reg);
+	}
+}
+
+/*
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct usb_hcd *hcd)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	void __iomem *reg;
+	u32 val;
+
+	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
+	val = readl(reg);
+	writel(val | BIT(28), reg);
+	readl(reg);
+}
+
+static void xhci_sparse_control_quirk(struct usb_hcd *hcd)
+{
+	u32 reg;
+
+	reg = readl(hcd->regs + SPARSE_CNTL_ENABLE);
+	reg &= ~BIT(SPARSE_DISABLE_BIT);
+	writel(reg, hcd->regs + SPARSE_CNTL_ENABLE);
+}
+
+static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+	int			ret;
+
+	/*
+	 * Systems with the TI redriver that loses port status change events
+	 * need to have the registers polled during D3, so avoid D3cold.
+	 */
+	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+		pci_d3cold_disable(pdev);
+
+#ifdef CONFIG_SUSPEND
+	/* d3cold is broken, but only when s2idle is used */
+	if (pm_suspend_target_state == PM_SUSPEND_TO_IDLE &&
+	    xhci->quirks & (XHCI_BROKEN_D3COLD_S2I))
+		pci_d3cold_disable(pdev);
+#endif
+
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_quirk(hcd);
+
+	if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
+		xhci_ssic_port_unused_quirk(hcd, true);
+
+	if (xhci->quirks & XHCI_DISABLE_SPARSE)
+		xhci_sparse_control_quirk(hcd);
+
+	ret = xhci_suspend(xhci, do_wakeup);
+	if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED))
+		xhci_ssic_port_unused_quirk(hcd, false);
+
+	return ret;
+}
+
+static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
+{
+	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+	int			retval = 0;
+
+	reset_control_reset(xhci->reset);
+
+	/* The BIOS on systems with the Intel Panther Point chipset may or may
+	 * not support xHCI natively.  That means that during system resume, it
+	 * may switch the ports back to EHCI so that users can use their
+	 * keyboard to select a kernel from GRUB after resume from hibernate.
+	 *
+	 * The BIOS is supposed to remember whether the OS had xHCI ports
+	 * enabled before resume, and switch the ports back to xHCI when the
+	 * BIOS/OS semaphore is written, but we all know we can't trust BIOS
+	 * writers.
+	 *
+	 * Unconditionally switch the ports back to xHCI after a system resume.
+	 * It should not matter whether the EHCI or xHCI controller is
+	 * resumed first. It's enough to do the switchover in xHCI because
+	 * USB core won't notice anything as the hub driver doesn't start
+	 * running again until after all the devices (including both EHCI and
+	 * xHCI host controllers) have been resumed.
+	 */
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+		usb_enable_intel_xhci_ports(pdev);
+
+	if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
+		xhci_ssic_port_unused_quirk(hcd, false);
+
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_quirk(hcd);
+
+	retval = xhci_resume(xhci, hibernated);
+	return retval;
+}
+
+static void xhci_pci_shutdown(struct usb_hcd *hcd)
+{
+	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+
+	xhci_shutdown(hcd);
+
+	/* Yet another workaround for spurious wakeups at shutdown with HSW */
+	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+		pci_set_power_state(pdev, PCI_D3hot);
+}
+#endif /* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+static const struct xhci_driver_data reneses_data = {
+	.quirks  = XHCI_RENESAS_FW_QUIRK,
+	.firmware = "renesas_usb_fw.mem",
+};
+
+/* PCI driver selection metadata; PCI hotplugging uses this */
+static const struct pci_device_id pci_ids[] = {
+	{ PCI_DEVICE(0x1912, 0x0014),
+		.driver_data =  (unsigned long)&reneses_data,
+	},
+	{ PCI_DEVICE(0x1912, 0x0015),
+		.driver_data =  (unsigned long)&reneses_data,
+	},
+	/* handle any USB 3.0 xHCI controller */
+	{ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
+	},
+	{ /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+/*
+ * Without CONFIG_USB_XHCI_PCI_RENESAS renesas_xhci_check_request_fw() won't
+ * load firmware, so don't encumber the xhci-pci driver with it.
+ */
+#if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS)
+MODULE_FIRMWARE("renesas_usb_fw.mem");
+#endif
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver xhci_pci_driver = {
+	.name =		hcd_name,
+	.id_table =	pci_ids,
+
+	.probe =	xhci_pci_probe,
+	.remove =	xhci_pci_remove,
+	/* suspend and resume implemented later */
+
+	.shutdown = 	usb_hcd_pci_shutdown,
+#ifdef CONFIG_PM
+	.driver = {
+		.pm = &usb_hcd_pci_pm_ops
+	},
+#endif
+};
+
+static int __init xhci_pci_init(void)
+{
+	xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides);
+#ifdef CONFIG_PM
+	xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
+	xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
+	xhci_pci_hc_driver.shutdown = xhci_pci_shutdown;
+#endif
+	return pci_register_driver(&xhci_pci_driver);
+}
+module_init(xhci_pci_init);
+
+static void __exit xhci_pci_exit(void)
+{
+	pci_unregister_driver(&xhci_pci_driver);
+}
+module_exit(xhci_pci_exit);
+
+MODULE_DESCRIPTION("xHCI PCI Host Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/xhci-pci.h b/drivers/usb/host/xhci-pci.h
new file mode 100644
index 000000000..cb9a8f331
--- /dev/null
+++ b/drivers/usb/host/xhci-pci.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2019-2020 Linaro Limited */
+
+#ifndef XHCI_PCI_H
+#define XHCI_PCI_H
+
+#if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS)
+int renesas_xhci_check_request_fw(struct pci_dev *dev,
+				  const struct pci_device_id *id);
+
+#else
+static int renesas_xhci_check_request_fw(struct pci_dev *dev,
+					 const struct pci_device_id *id)
+{
+	return 0;
+}
+
+#endif
+
+struct xhci_driver_data {
+	u64 quirks;
+	const char *firmware;
+};
+
+#endif
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
new file mode 100644
index 000000000..c9438dc56
--- /dev/null
+++ b/drivers/usb/host/xhci-plat.c
@@ -0,0 +1,565 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xhci-plat.c - xHCI host controller driver platform Bus Glue.
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com
+ * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * A lot of code borrowed from the Linux xHCI driver.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/usb/phy.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/usb/of.h>
+
+#include "xhci.h"
+#include "xhci-plat.h"
+#include "xhci-mvebu.h"
+#include "xhci-rcar.h"
+
+static struct hc_driver __read_mostly xhci_plat_hc_driver;
+
+static int xhci_plat_setup(struct usb_hcd *hcd);
+static int xhci_plat_start(struct usb_hcd *hcd);
+
+static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
+	.extra_priv_size = sizeof(struct xhci_plat_priv),
+	.reset = xhci_plat_setup,
+	.start = xhci_plat_start,
+};
+
+static void xhci_priv_plat_start(struct usb_hcd *hcd)
+{
+	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+
+	if (priv->plat_start)
+		priv->plat_start(hcd);
+}
+
+static int xhci_priv_init_quirk(struct usb_hcd *hcd)
+{
+	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+
+	if (!priv->init_quirk)
+		return 0;
+
+	return priv->init_quirk(hcd);
+}
+
+static int xhci_priv_suspend_quirk(struct usb_hcd *hcd)
+{
+	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+
+	if (!priv->suspend_quirk)
+		return 0;
+
+	return priv->suspend_quirk(hcd);
+}
+
+static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
+{
+	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+
+	if (!priv->resume_quirk)
+		return 0;
+
+	return priv->resume_quirk(hcd);
+}
+
+static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
+{
+	struct xhci_plat_priv *priv = xhci_to_priv(xhci);
+
+	/*
+	 * As of now platform drivers don't provide MSI support so we ensure
+	 * here that the generic code does not try to make a pci_dev from our
+	 * dev struct in order to setup MSI
+	 */
+	xhci->quirks |= XHCI_PLAT | priv->quirks;
+}
+
+/* called during probe() after chip reset completes */
+static int xhci_plat_setup(struct usb_hcd *hcd)
+{
+	int ret;
+
+
+	ret = xhci_priv_init_quirk(hcd);
+	if (ret)
+		return ret;
+
+	return xhci_gen_setup(hcd, xhci_plat_quirks);
+}
+
+static int xhci_plat_start(struct usb_hcd *hcd)
+{
+	xhci_priv_plat_start(hcd);
+	return xhci_run(hcd);
+}
+
+#ifdef CONFIG_OF
+static const struct xhci_plat_priv xhci_plat_marvell_armada = {
+	.init_quirk = xhci_mvebu_mbus_init_quirk,
+};
+
+static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = {
+	.init_quirk = xhci_mvebu_a3700_init_quirk,
+};
+
+static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
+	SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V1)
+};
+
+static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
+	SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V3)
+};
+
+static const struct xhci_plat_priv xhci_plat_brcm = {
+	.quirks = XHCI_RESET_ON_RESUME | XHCI_SUSPEND_RESUME_CLKS,
+};
+
+static const struct of_device_id usb_xhci_of_match[] = {
+	{
+		.compatible = "generic-xhci",
+	}, {
+		.compatible = "xhci-platform",
+	}, {
+		.compatible = "marvell,armada-375-xhci",
+		.data = &xhci_plat_marvell_armada,
+	}, {
+		.compatible = "marvell,armada-380-xhci",
+		.data = &xhci_plat_marvell_armada,
+	}, {
+		.compatible = "marvell,armada3700-xhci",
+		.data = &xhci_plat_marvell_armada3700,
+	}, {
+		.compatible = "renesas,xhci-r8a7790",
+		.data = &xhci_plat_renesas_rcar_gen2,
+	}, {
+		.compatible = "renesas,xhci-r8a7791",
+		.data = &xhci_plat_renesas_rcar_gen2,
+	}, {
+		.compatible = "renesas,xhci-r8a7793",
+		.data = &xhci_plat_renesas_rcar_gen2,
+	}, {
+		.compatible = "renesas,xhci-r8a7795",
+		.data = &xhci_plat_renesas_rcar_gen3,
+	}, {
+		.compatible = "renesas,xhci-r8a7796",
+		.data = &xhci_plat_renesas_rcar_gen3,
+	}, {
+		.compatible = "renesas,rcar-gen2-xhci",
+		.data = &xhci_plat_renesas_rcar_gen2,
+	}, {
+		.compatible = "renesas,rcar-gen3-xhci",
+		.data = &xhci_plat_renesas_rcar_gen3,
+	}, {
+		.compatible = "brcm,xhci-brcm-v2",
+		.data = &xhci_plat_brcm,
+	}, {
+		.compatible = "brcm,bcm7445-xhci",
+		.data = &xhci_plat_brcm,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
+#endif
+
+static int xhci_plat_probe(struct platform_device *pdev)
+{
+	const struct xhci_plat_priv *priv_match;
+	const struct hc_driver	*driver;
+	struct device		*sysdev, *tmpdev;
+	struct xhci_hcd		*xhci;
+	struct resource         *res;
+	struct usb_hcd		*hcd, *usb3_hcd;
+	int			ret;
+	int			irq;
+	struct xhci_plat_priv	*priv = NULL;
+	bool			of_match;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	driver = &xhci_plat_hc_driver;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	/*
+	 * sysdev must point to a device that is known to the system firmware
+	 * or PCI hardware. We handle these three cases here:
+	 * 1. xhci_plat comes from firmware
+	 * 2. xhci_plat is child of a device from firmware (dwc3-plat)
+	 * 3. xhci_plat is grandchild of a pci device (dwc3-pci)
+	 */
+	for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) {
+		if (is_of_node(sysdev->fwnode) ||
+			is_acpi_device_node(sysdev->fwnode))
+			break;
+#ifdef CONFIG_PCI
+		else if (sysdev->bus == &pci_bus_type)
+			break;
+#endif
+	}
+
+	if (!sysdev)
+		sysdev = &pdev->dev;
+
+	if (WARN_ON(!sysdev->dma_mask))
+		/* Platform did not initialize dma_mask */
+		ret = dma_coerce_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
+	else
+		ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
+	if (ret)
+		return ret;
+
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
+
+	hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
+			       dev_name(&pdev->dev), NULL);
+	if (!hcd) {
+		ret = -ENOMEM;
+		goto disable_runtime;
+	}
+
+	hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(hcd->regs)) {
+		ret = PTR_ERR(hcd->regs);
+		goto put_hcd;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	xhci = hcd_to_xhci(hcd);
+
+	xhci->allow_single_roothub = 1;
+
+	/*
+	 * Not all platforms have clks so it is not an error if the
+	 * clock do not exist.
+	 */
+	xhci->reg_clk = devm_clk_get_optional(&pdev->dev, "reg");
+	if (IS_ERR(xhci->reg_clk)) {
+		ret = PTR_ERR(xhci->reg_clk);
+		goto put_hcd;
+	}
+
+	ret = clk_prepare_enable(xhci->reg_clk);
+	if (ret)
+		goto put_hcd;
+
+	xhci->clk = devm_clk_get_optional(&pdev->dev, NULL);
+	if (IS_ERR(xhci->clk)) {
+		ret = PTR_ERR(xhci->clk);
+		goto disable_reg_clk;
+	}
+
+	ret = clk_prepare_enable(xhci->clk);
+	if (ret)
+		goto disable_reg_clk;
+
+	if (pdev->dev.of_node)
+		priv_match = of_device_get_match_data(&pdev->dev);
+	else
+		priv_match = dev_get_platdata(&pdev->dev);
+
+	if (priv_match) {
+		priv = hcd_to_xhci_priv(hcd);
+		/* Just copy data for now */
+		*priv = *priv_match;
+	}
+
+	device_set_wakeup_capable(&pdev->dev, true);
+
+	xhci->main_hcd = hcd;
+
+	/* imod_interval is the interrupt moderation value in nanoseconds. */
+	xhci->imod_interval = 40000;
+
+	/* Iterate over all parent nodes for finding quirks */
+	for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) {
+
+		if (device_property_read_bool(tmpdev, "usb2-lpm-disable"))
+			xhci->quirks |= XHCI_HW_LPM_DISABLE;
+
+		if (device_property_read_bool(tmpdev, "usb3-lpm-capable"))
+			xhci->quirks |= XHCI_LPM_SUPPORT;
+
+		if (device_property_read_bool(tmpdev, "quirk-broken-port-ped"))
+			xhci->quirks |= XHCI_BROKEN_PORT_PED;
+
+		device_property_read_u32(tmpdev, "imod-interval-ns",
+					 &xhci->imod_interval);
+	}
+
+	/*
+	 * Drivers such as dwc3 manages PHYs themself (and rely on driver name
+	 * matching for the xhci platform device).
+	 */
+	of_match = of_match_device(pdev->dev.driver->of_match_table, &pdev->dev);
+	if (of_match) {
+		hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
+		if (IS_ERR(hcd->usb_phy)) {
+			ret = PTR_ERR(hcd->usb_phy);
+			if (ret == -EPROBE_DEFER)
+				goto disable_clk;
+			hcd->usb_phy = NULL;
+		} else {
+			ret = usb_phy_init(hcd->usb_phy);
+			if (ret)
+				goto disable_clk;
+		}
+	}
+
+	hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
+
+	if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
+		hcd->skip_phy_initialization = 1;
+
+	if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK))
+		xhci->quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
+
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (ret)
+		goto disable_usb_phy;
+
+	if (!xhci_has_one_roothub(xhci)) {
+		xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
+						    dev_name(&pdev->dev), hcd);
+		if (!xhci->shared_hcd) {
+			ret = -ENOMEM;
+			goto dealloc_usb2_hcd;
+		}
+
+		xhci->shared_hcd->tpl_support = hcd->tpl_support;
+	}
+
+	usb3_hcd = xhci_get_usb3_hcd(xhci);
+	if (usb3_hcd && HCC_MAX_PSA(xhci->hcc_params) >= 4)
+		usb3_hcd->can_do_streams = 1;
+
+	if (xhci->shared_hcd) {
+		ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
+		if (ret)
+			goto put_usb3_hcd;
+	}
+
+	device_enable_async_suspend(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+
+	/*
+	 * Prevent runtime pm from being on as default, users should enable
+	 * runtime pm using power/control in sysfs.
+	 */
+	pm_runtime_forbid(&pdev->dev);
+
+	return 0;
+
+
+put_usb3_hcd:
+	usb_put_hcd(xhci->shared_hcd);
+
+dealloc_usb2_hcd:
+	usb_remove_hcd(hcd);
+
+disable_usb_phy:
+	usb_phy_shutdown(hcd->usb_phy);
+
+disable_clk:
+	clk_disable_unprepare(xhci->clk);
+
+disable_reg_clk:
+	clk_disable_unprepare(xhci->reg_clk);
+
+put_hcd:
+	usb_put_hcd(hcd);
+
+disable_runtime:
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int xhci_plat_remove(struct platform_device *dev)
+{
+	struct usb_hcd	*hcd = platform_get_drvdata(dev);
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct clk *clk = xhci->clk;
+	struct clk *reg_clk = xhci->reg_clk;
+	struct usb_hcd *shared_hcd = xhci->shared_hcd;
+
+	pm_runtime_get_sync(&dev->dev);
+	xhci->xhc_state |= XHCI_STATE_REMOVING;
+
+	if (shared_hcd) {
+		usb_remove_hcd(shared_hcd);
+		xhci->shared_hcd = NULL;
+	}
+
+	usb_phy_shutdown(hcd->usb_phy);
+
+	usb_remove_hcd(hcd);
+
+	if (shared_hcd)
+		usb_put_hcd(shared_hcd);
+
+	clk_disable_unprepare(clk);
+	clk_disable_unprepare(reg_clk);
+	usb_put_hcd(hcd);
+
+	pm_runtime_disable(&dev->dev);
+	pm_runtime_put_noidle(&dev->dev);
+	pm_runtime_set_suspended(&dev->dev);
+
+	return 0;
+}
+
+static int __maybe_unused xhci_plat_suspend(struct device *dev)
+{
+	struct usb_hcd	*hcd = dev_get_drvdata(dev);
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int ret;
+
+	if (pm_runtime_suspended(dev))
+		pm_runtime_resume(dev);
+
+	ret = xhci_priv_suspend_quirk(hcd);
+	if (ret)
+		return ret;
+	/*
+	 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
+	 * to do wakeup during suspend.
+	 */
+	ret = xhci_suspend(xhci, device_may_wakeup(dev));
+	if (ret)
+		return ret;
+
+	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
+		clk_disable_unprepare(xhci->clk);
+		clk_disable_unprepare(xhci->reg_clk);
+	}
+
+	return 0;
+}
+
+static int __maybe_unused xhci_plat_resume(struct device *dev)
+{
+	struct usb_hcd	*hcd = dev_get_drvdata(dev);
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int ret;
+
+	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
+		ret = clk_prepare_enable(xhci->clk);
+		if (ret)
+			return ret;
+
+		ret = clk_prepare_enable(xhci->reg_clk);
+		if (ret) {
+			clk_disable_unprepare(xhci->clk);
+			return ret;
+		}
+	}
+
+	ret = xhci_priv_resume_quirk(hcd);
+	if (ret)
+		goto disable_clks;
+
+	ret = xhci_resume(xhci, 0);
+	if (ret)
+		goto disable_clks;
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+
+disable_clks:
+	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
+		clk_disable_unprepare(xhci->clk);
+		clk_disable_unprepare(xhci->reg_clk);
+	}
+
+	return ret;
+}
+
+static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
+{
+	struct usb_hcd  *hcd = dev_get_drvdata(dev);
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	int ret;
+
+	ret = xhci_priv_suspend_quirk(hcd);
+	if (ret)
+		return ret;
+
+	return xhci_suspend(xhci, true);
+}
+
+static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
+{
+	struct usb_hcd  *hcd = dev_get_drvdata(dev);
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+	return xhci_resume(xhci, 0);
+}
+
+static const struct dev_pm_ops xhci_plat_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
+
+	SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
+			   xhci_plat_runtime_resume,
+			   NULL)
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id usb_xhci_acpi_match[] = {
+	/* XHCI-compliant USB Controller */
+	{ "PNP0D10", },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
+#endif
+
+static struct platform_driver usb_xhci_driver = {
+	.probe	= xhci_plat_probe,
+	.remove	= xhci_plat_remove,
+	.shutdown = usb_hcd_platform_shutdown,
+	.driver	= {
+		.name = "xhci-hcd",
+		.pm = &xhci_plat_pm_ops,
+		.of_match_table = of_match_ptr(usb_xhci_of_match),
+		.acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
+	},
+};
+MODULE_ALIAS("platform:xhci-hcd");
+
+static int __init xhci_plat_init(void)
+{
+	xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides);
+	return platform_driver_register(&usb_xhci_driver);
+}
+module_init(xhci_plat_init);
+
+static void __exit xhci_plat_exit(void)
+{
+	platform_driver_unregister(&usb_xhci_driver);
+}
+module_exit(xhci_plat_exit);
+
+MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h
new file mode 100644
index 000000000..1fb149d1f
--- /dev/null
+++ b/drivers/usb/host/xhci-plat.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * xhci-plat.h - xHCI host controller driver platform Bus Glue.
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ */
+
+#ifndef _XHCI_PLAT_H
+#define _XHCI_PLAT_H
+
+#include "xhci.h"	/* for hcd_to_xhci() */
+
+struct xhci_plat_priv {
+	const char *firmware_name;
+	unsigned long long quirks;
+	void (*plat_start)(struct usb_hcd *);
+	int (*init_quirk)(struct usb_hcd *);
+	int (*suspend_quirk)(struct usb_hcd *);
+	int (*resume_quirk)(struct usb_hcd *);
+};
+
+#define hcd_to_xhci_priv(h) ((struct xhci_plat_priv *)hcd_to_xhci(h)->priv)
+#define xhci_to_priv(x) ((struct xhci_plat_priv *)(x)->priv)
+#endif	/* _XHCI_PLAT_H */
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
new file mode 100644
index 000000000..98525704b
--- /dev/null
+++ b/drivers/usb/host/xhci-rcar.c
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xHCI host controller driver for R-Car SoCs
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ */
+
+#include <linux/firmware.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/usb/phy.h>
+#include <linux/sys_soc.h>
+
+#include "xhci.h"
+#include "xhci-plat.h"
+#include "xhci-rcar.h"
+
+/*
+* - The V3 firmware is for almost all R-Car Gen3 (except r8a7795 ES1.x)
+* - The V2 firmware is for r8a7795 ES1.x.
+* - The V2 firmware is possible to use on R-Car Gen2. However, the V2 causes
+*   performance degradation. So, this driver continues to use the V1 if R-Car
+*   Gen2.
+* - The V1 firmware is impossible to use on R-Car Gen3.
+*/
+MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V1);
+MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V2);
+MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3);
+
+/*** Register Offset ***/
+#define RCAR_USB3_AXH_STA	0x104	/* AXI Host Control Status */
+#define RCAR_USB3_INT_ENA	0x224	/* Interrupt Enable */
+#define RCAR_USB3_DL_CTRL	0x250	/* FW Download Control & Status */
+#define RCAR_USB3_FW_DATA0	0x258	/* FW Data0 */
+
+#define RCAR_USB3_LCLK		0xa44	/* LCLK Select */
+#define RCAR_USB3_CONF1		0xa48	/* USB3.0 Configuration1 */
+#define RCAR_USB3_CONF2		0xa5c	/* USB3.0 Configuration2 */
+#define RCAR_USB3_CONF3		0xaa8	/* USB3.0 Configuration3 */
+#define RCAR_USB3_RX_POL	0xab0	/* USB3.0 RX Polarity */
+#define RCAR_USB3_TX_POL	0xab8	/* USB3.0 TX Polarity */
+
+/*** Register Settings ***/
+/* AXI Host Control Status */
+#define RCAR_USB3_AXH_STA_B3_PLL_ACTIVE		0x00010000
+#define RCAR_USB3_AXH_STA_B2_PLL_ACTIVE		0x00000001
+#define RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK (RCAR_USB3_AXH_STA_B3_PLL_ACTIVE | \
+					   RCAR_USB3_AXH_STA_B2_PLL_ACTIVE)
+
+/* Interrupt Enable */
+#define RCAR_USB3_INT_XHC_ENA	0x00000001
+#define RCAR_USB3_INT_PME_ENA	0x00000002
+#define RCAR_USB3_INT_HSE_ENA	0x00000004
+#define RCAR_USB3_INT_ENA_VAL	(RCAR_USB3_INT_XHC_ENA | \
+				RCAR_USB3_INT_PME_ENA | RCAR_USB3_INT_HSE_ENA)
+
+/* FW Download Control & Status */
+#define RCAR_USB3_DL_CTRL_ENABLE	0x00000001
+#define RCAR_USB3_DL_CTRL_FW_SUCCESS	0x00000010
+#define RCAR_USB3_DL_CTRL_FW_SET_DATA0	0x00000100
+
+/* LCLK Select */
+#define RCAR_USB3_LCLK_ENA_VAL	0x01030001
+
+/* USB3.0 Configuration */
+#define RCAR_USB3_CONF1_VAL	0x00030204
+#define RCAR_USB3_CONF2_VAL	0x00030300
+#define RCAR_USB3_CONF3_VAL	0x13802007
+
+/* USB3.0 Polarity */
+#define RCAR_USB3_RX_POL_VAL	BIT(21)
+#define RCAR_USB3_TX_POL_VAL	BIT(4)
+
+/* For soc_device_attribute */
+#define RCAR_XHCI_FIRMWARE_V2   BIT(0) /* FIRMWARE V2 */
+
+static const struct soc_device_attribute rcar_quirks_match[]  = {
+	{
+		.soc_id = "r8a7795", .revision = "ES1.*",
+		.data = (void *)RCAR_XHCI_FIRMWARE_V2,
+	},
+	{ /* sentinel */ }
+};
+
+static void xhci_rcar_start_gen2(struct usb_hcd *hcd)
+{
+	/* LCLK Select */
+	writel(RCAR_USB3_LCLK_ENA_VAL, hcd->regs + RCAR_USB3_LCLK);
+	/* USB3.0 Configuration */
+	writel(RCAR_USB3_CONF1_VAL, hcd->regs + RCAR_USB3_CONF1);
+	writel(RCAR_USB3_CONF2_VAL, hcd->regs + RCAR_USB3_CONF2);
+	writel(RCAR_USB3_CONF3_VAL, hcd->regs + RCAR_USB3_CONF3);
+	/* USB3.0 Polarity */
+	writel(RCAR_USB3_RX_POL_VAL, hcd->regs + RCAR_USB3_RX_POL);
+	writel(RCAR_USB3_TX_POL_VAL, hcd->regs + RCAR_USB3_TX_POL);
+}
+
+static int xhci_rcar_is_gen2(struct device *dev)
+{
+	struct device_node *node = dev->of_node;
+
+	return of_device_is_compatible(node, "renesas,xhci-r8a7790") ||
+		of_device_is_compatible(node, "renesas,xhci-r8a7791") ||
+		of_device_is_compatible(node, "renesas,xhci-r8a7793") ||
+		of_device_is_compatible(node, "renesas,rcar-gen2-xhci");
+}
+
+void xhci_rcar_start(struct usb_hcd *hcd)
+{
+	u32 temp;
+
+	if (hcd->regs != NULL) {
+		/* Interrupt Enable */
+		temp = readl(hcd->regs + RCAR_USB3_INT_ENA);
+		temp |= RCAR_USB3_INT_ENA_VAL;
+		writel(temp, hcd->regs + RCAR_USB3_INT_ENA);
+		if (xhci_rcar_is_gen2(hcd->self.controller))
+			xhci_rcar_start_gen2(hcd);
+	}
+}
+
+static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
+{
+	struct device *dev = hcd->self.controller;
+	void __iomem *regs = hcd->regs;
+	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+	const struct firmware *fw;
+	int retval, index, j;
+	u32 data, val, temp;
+	u32 quirks = 0;
+	const struct soc_device_attribute *attr;
+	const char *firmware_name;
+
+	/*
+	 * According to the datasheet, "Upon the completion of FW Download,
+	 * there is no need to write or reload FW".
+	 */
+	if (readl(regs + RCAR_USB3_DL_CTRL) & RCAR_USB3_DL_CTRL_FW_SUCCESS)
+		return 0;
+
+	attr = soc_device_match(rcar_quirks_match);
+	if (attr)
+		quirks = (uintptr_t)attr->data;
+
+	if (quirks & RCAR_XHCI_FIRMWARE_V2)
+		firmware_name = XHCI_RCAR_FIRMWARE_NAME_V2;
+	else
+		firmware_name = priv->firmware_name;
+
+	/* request R-Car USB3.0 firmware */
+	retval = request_firmware(&fw, firmware_name, dev);
+	if (retval)
+		return retval;
+
+	/* download R-Car USB3.0 firmware */
+	temp = readl(regs + RCAR_USB3_DL_CTRL);
+	temp |= RCAR_USB3_DL_CTRL_ENABLE;
+	writel(temp, regs + RCAR_USB3_DL_CTRL);
+
+	for (index = 0; index < fw->size; index += 4) {
+		/* to avoid reading beyond the end of the buffer */
+		for (data = 0, j = 3; j >= 0; j--) {
+			if ((j + index) < fw->size)
+				data |= fw->data[index + j] << (8 * j);
+		}
+		writel(data, regs + RCAR_USB3_FW_DATA0);
+		temp = readl(regs + RCAR_USB3_DL_CTRL);
+		temp |= RCAR_USB3_DL_CTRL_FW_SET_DATA0;
+		writel(temp, regs + RCAR_USB3_DL_CTRL);
+
+		retval = readl_poll_timeout_atomic(regs + RCAR_USB3_DL_CTRL,
+				val, !(val & RCAR_USB3_DL_CTRL_FW_SET_DATA0),
+				1, 10000);
+		if (retval < 0)
+			break;
+	}
+
+	temp = readl(regs + RCAR_USB3_DL_CTRL);
+	temp &= ~RCAR_USB3_DL_CTRL_ENABLE;
+	writel(temp, regs + RCAR_USB3_DL_CTRL);
+
+	retval = readl_poll_timeout_atomic((regs + RCAR_USB3_DL_CTRL),
+			val, val & RCAR_USB3_DL_CTRL_FW_SUCCESS, 1, 10000);
+
+	release_firmware(fw);
+
+	return retval;
+}
+
+static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd)
+{
+	int retval;
+	u32 val, mask = RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK;
+
+	retval = readl_poll_timeout_atomic(hcd->regs + RCAR_USB3_AXH_STA,
+			val, (val & mask) == mask, 1, 1000);
+	return !retval;
+}
+
+/* This function needs to initialize a "phy" of usb before */
+int xhci_rcar_init_quirk(struct usb_hcd *hcd)
+{
+	/* If hcd->regs is NULL, we don't just call the following function */
+	if (!hcd->regs)
+		return 0;
+
+	if (!xhci_rcar_wait_for_pll_active(hcd))
+		return -ETIMEDOUT;
+
+	return xhci_rcar_download_firmware(hcd);
+}
+
+int xhci_rcar_resume_quirk(struct usb_hcd *hcd)
+{
+	int ret;
+
+	ret = xhci_rcar_download_firmware(hcd);
+	if (!ret)
+		xhci_rcar_start(hcd);
+
+	return ret;
+}
diff --git a/drivers/usb/host/xhci-rcar.h b/drivers/usb/host/xhci-rcar.h
new file mode 100644
index 000000000..048ad3b8a
--- /dev/null
+++ b/drivers/usb/host/xhci-rcar.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * drivers/usb/host/xhci-rcar.h
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ */
+
+#ifndef _XHCI_RCAR_H
+#define _XHCI_RCAR_H
+
+#define XHCI_RCAR_FIRMWARE_NAME_V1	"r8a779x_usb3_v1.dlmem"
+#define XHCI_RCAR_FIRMWARE_NAME_V2	"r8a779x_usb3_v2.dlmem"
+#define XHCI_RCAR_FIRMWARE_NAME_V3	"r8a779x_usb3_v3.dlmem"
+
+#if IS_ENABLED(CONFIG_USB_XHCI_RCAR)
+void xhci_rcar_start(struct usb_hcd *hcd);
+int xhci_rcar_init_quirk(struct usb_hcd *hcd);
+int xhci_rcar_resume_quirk(struct usb_hcd *hcd);
+#else
+static inline void xhci_rcar_start(struct usb_hcd *hcd)
+{
+}
+
+static inline int xhci_rcar_init_quirk(struct usb_hcd *hcd)
+{
+	return 0;
+}
+
+static inline int xhci_rcar_resume_quirk(struct usb_hcd *hcd)
+{
+	return 0;
+}
+#endif
+
+/*
+ * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
+ * to 1. However, these SoCs don't support 64-bit address memory
+ * pointers. So, this driver clears the AC64 bit of xhci->hcc_params
+ * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
+ * xhci_gen_setup() by using the XHCI_NO_64BIT_SUPPORT quirk.
+ *
+ * And, since the firmware/internal CPU control the USBSTS.STS_HALT
+ * and the process speed is down when the roothub port enters U3,
+ * long delay for the handshake of STS_HALT is neeed in xhci_suspend()
+ * by using the XHCI_SLOW_SUSPEND quirk.
+ */
+#define SET_XHCI_PLAT_PRIV_FOR_RCAR(firmware)				\
+	.firmware_name = firmware,					\
+	.quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH |	\
+		  XHCI_SLOW_SUSPEND,					\
+	.init_quirk = xhci_rcar_init_quirk,				\
+	.plat_start = xhci_rcar_start,					\
+	.resume_quirk = xhci_rcar_resume_quirk,
+
+#endif /* _XHCI_RCAR_H */
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
new file mode 100644
index 000000000..1239e06df
--- /dev/null
+++ b/drivers/usb/host/xhci-ring.c
@@ -0,0 +1,4385 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ */
+
+/*
+ * Ring initialization rules:
+ * 1. Each segment is initialized to zero, except for link TRBs.
+ * 2. Ring cycle state = 0.  This represents Producer Cycle State (PCS) or
+ *    Consumer Cycle State (CCS), depending on ring function.
+ * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment.
+ *
+ * Ring behavior rules:
+ * 1. A ring is empty if enqueue == dequeue.  This means there will always be at
+ *    least one free TRB in the ring.  This is useful if you want to turn that
+ *    into a link TRB and expand the ring.
+ * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a
+ *    link TRB, then load the pointer with the address in the link TRB.  If the
+ *    link TRB had its toggle bit set, you may need to update the ring cycle
+ *    state (see cycle bit rules).  You may have to do this multiple times
+ *    until you reach a non-link TRB.
+ * 3. A ring is full if enqueue++ (for the definition of increment above)
+ *    equals the dequeue pointer.
+ *
+ * Cycle bit rules:
+ * 1. When a consumer increments a dequeue pointer and encounters a toggle bit
+ *    in a link TRB, it must toggle the ring cycle state.
+ * 2. When a producer increments an enqueue pointer and encounters a toggle bit
+ *    in a link TRB, it must toggle the ring cycle state.
+ *
+ * Producer rules:
+ * 1. Check if ring is full before you enqueue.
+ * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing.
+ *    Update enqueue pointer between each write (which may update the ring
+ *    cycle state).
+ * 3. Notify consumer.  If SW is producer, it rings the doorbell for command
+ *    and endpoint rings.  If HC is the producer for the event ring,
+ *    and it generates an interrupt according to interrupt modulation rules.
+ *
+ * Consumer rules:
+ * 1. Check if TRB belongs to you.  If the cycle bit == your ring cycle state,
+ *    the TRB is owned by the consumer.
+ * 2. Update dequeue pointer (which may update the ring cycle state) and
+ *    continue processing TRBs until you reach a TRB which is not owned by you.
+ * 3. Notify the producer.  SW is the consumer for the event ring, and it
+ *   updates event ring dequeue pointer.  HC is the consumer for the command and
+ *   endpoint rings; it generates events on the event ring for these.
+ */
+
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include "xhci.h"
+#include "xhci-trace.h"
+
+static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
+			 u32 field1, u32 field2,
+			 u32 field3, u32 field4, bool command_must_succeed);
+
+/*
+ * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
+ * address of the TRB.
+ */
+dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
+		union xhci_trb *trb)
+{
+	unsigned long segment_offset;
+
+	if (!seg || !trb || trb < seg->trbs)
+		return 0;
+	/* offset in TRBs */
+	segment_offset = trb - seg->trbs;
+	if (segment_offset >= TRBS_PER_SEGMENT)
+		return 0;
+	return seg->dma + (segment_offset * sizeof(*trb));
+}
+
+static bool trb_is_noop(union xhci_trb *trb)
+{
+	return TRB_TYPE_NOOP_LE32(trb->generic.field[3]);
+}
+
+static bool trb_is_link(union xhci_trb *trb)
+{
+	return TRB_TYPE_LINK_LE32(trb->link.control);
+}
+
+static bool last_trb_on_seg(struct xhci_segment *seg, union xhci_trb *trb)
+{
+	return trb == &seg->trbs[TRBS_PER_SEGMENT - 1];
+}
+
+static bool last_trb_on_ring(struct xhci_ring *ring,
+			struct xhci_segment *seg, union xhci_trb *trb)
+{
+	return last_trb_on_seg(seg, trb) && (seg->next == ring->first_seg);
+}
+
+static bool link_trb_toggles_cycle(union xhci_trb *trb)
+{
+	return le32_to_cpu(trb->link.control) & LINK_TOGGLE;
+}
+
+static bool last_td_in_urb(struct xhci_td *td)
+{
+	struct urb_priv *urb_priv = td->urb->hcpriv;
+
+	return urb_priv->num_tds_done == urb_priv->num_tds;
+}
+
+static void inc_td_cnt(struct urb *urb)
+{
+	struct urb_priv *urb_priv = urb->hcpriv;
+
+	urb_priv->num_tds_done++;
+}
+
+static void trb_to_noop(union xhci_trb *trb, u32 noop_type)
+{
+	if (trb_is_link(trb)) {
+		/* unchain chained link TRBs */
+		trb->link.control &= cpu_to_le32(~TRB_CHAIN);
+	} else {
+		trb->generic.field[0] = 0;
+		trb->generic.field[1] = 0;
+		trb->generic.field[2] = 0;
+		/* Preserve only the cycle bit of this TRB */
+		trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE);
+		trb->generic.field[3] |= cpu_to_le32(TRB_TYPE(noop_type));
+	}
+}
+
+/* Updates trb to point to the next TRB in the ring, and updates seg if the next
+ * TRB is in a new segment.  This does not skip over link TRBs, and it does not
+ * effect the ring dequeue or enqueue pointers.
+ */
+static void next_trb(struct xhci_hcd *xhci,
+		struct xhci_ring *ring,
+		struct xhci_segment **seg,
+		union xhci_trb **trb)
+{
+	if (trb_is_link(*trb)) {
+		*seg = (*seg)->next;
+		*trb = ((*seg)->trbs);
+	} else {
+		(*trb)++;
+	}
+}
+
+/*
+ * See Cycle bit rules. SW is the consumer for the event ring only.
+ */
+void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring)
+{
+	unsigned int link_trb_count = 0;
+
+	/* event ring doesn't have link trbs, check for last trb */
+	if (ring->type == TYPE_EVENT) {
+		if (!last_trb_on_seg(ring->deq_seg, ring->dequeue)) {
+			ring->dequeue++;
+			goto out;
+		}
+		if (last_trb_on_ring(ring, ring->deq_seg, ring->dequeue))
+			ring->cycle_state ^= 1;
+		ring->deq_seg = ring->deq_seg->next;
+		ring->dequeue = ring->deq_seg->trbs;
+		goto out;
+	}
+
+	/* All other rings have link trbs */
+	if (!trb_is_link(ring->dequeue)) {
+		if (last_trb_on_seg(ring->deq_seg, ring->dequeue)) {
+			xhci_warn(xhci, "Missing link TRB at end of segment\n");
+		} else {
+			ring->dequeue++;
+			ring->num_trbs_free++;
+		}
+	}
+
+	while (trb_is_link(ring->dequeue)) {
+		ring->deq_seg = ring->deq_seg->next;
+		ring->dequeue = ring->deq_seg->trbs;
+
+		if (link_trb_count++ > ring->num_segs) {
+			xhci_warn(xhci, "Ring is an endless link TRB loop\n");
+			break;
+		}
+	}
+out:
+	trace_xhci_inc_deq(ring);
+
+	return;
+}
+
+/*
+ * See Cycle bit rules. SW is the consumer for the event ring only.
+ *
+ * If we've just enqueued a TRB that is in the middle of a TD (meaning the
+ * chain bit is set), then set the chain bit in all the following link TRBs.
+ * If we've enqueued the last TRB in a TD, make sure the following link TRBs
+ * have their chain bit cleared (so that each Link TRB is a separate TD).
+ *
+ * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
+ * set, but other sections talk about dealing with the chain bit set.  This was
+ * fixed in the 0.96 specification errata, but we have to assume that all 0.95
+ * xHCI hardware can't handle the chain bit being cleared on a link TRB.
+ *
+ * @more_trbs_coming:	Will you enqueue more TRBs before calling
+ *			prepare_transfer()?
+ */
+static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
+			bool more_trbs_coming)
+{
+	u32 chain;
+	union xhci_trb *next;
+	unsigned int link_trb_count = 0;
+
+	chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN;
+	/* If this is not event ring, there is one less usable TRB */
+	if (!trb_is_link(ring->enqueue))
+		ring->num_trbs_free--;
+
+	if (last_trb_on_seg(ring->enq_seg, ring->enqueue)) {
+		xhci_err(xhci, "Tried to move enqueue past ring segment\n");
+		return;
+	}
+
+	next = ++(ring->enqueue);
+
+	/* Update the dequeue pointer further if that was a link TRB */
+	while (trb_is_link(next)) {
+
+		/*
+		 * If the caller doesn't plan on enqueueing more TDs before
+		 * ringing the doorbell, then we don't want to give the link TRB
+		 * to the hardware just yet. We'll give the link TRB back in
+		 * prepare_ring() just before we enqueue the TD at the top of
+		 * the ring.
+		 */
+		if (!chain && !more_trbs_coming)
+			break;
+
+		/* If we're not dealing with 0.95 hardware or isoc rings on
+		 * AMD 0.96 host, carry over the chain bit of the previous TRB
+		 * (which may mean the chain bit is cleared).
+		 */
+		if (!(ring->type == TYPE_ISOC &&
+		      (xhci->quirks & XHCI_AMD_0x96_HOST)) &&
+		    !xhci_link_trb_quirk(xhci)) {
+			next->link.control &= cpu_to_le32(~TRB_CHAIN);
+			next->link.control |= cpu_to_le32(chain);
+		}
+		/* Give this link TRB to the hardware */
+		wmb();
+		next->link.control ^= cpu_to_le32(TRB_CYCLE);
+
+		/* Toggle the cycle bit after the last ring segment. */
+		if (link_trb_toggles_cycle(next))
+			ring->cycle_state ^= 1;
+
+		ring->enq_seg = ring->enq_seg->next;
+		ring->enqueue = ring->enq_seg->trbs;
+		next = ring->enqueue;
+
+		if (link_trb_count++ > ring->num_segs) {
+			xhci_warn(xhci, "%s: Ring link TRB loop\n", __func__);
+			break;
+		}
+	}
+
+	trace_xhci_inc_enq(ring);
+}
+
+static int xhci_num_trbs_to(struct xhci_segment *start_seg, union xhci_trb *start,
+			    struct xhci_segment *end_seg, union xhci_trb *end,
+			    unsigned int num_segs)
+{
+	union xhci_trb *last_on_seg;
+	int num = 0;
+	int i = 0;
+
+	do {
+		if (start_seg == end_seg && end >= start)
+			return num + (end - start);
+		last_on_seg = &start_seg->trbs[TRBS_PER_SEGMENT - 1];
+		num += last_on_seg - start;
+		start_seg = start_seg->next;
+		start = start_seg->trbs;
+	} while (i++ <= num_segs);
+
+	return -EINVAL;
+}
+
+/*
+ * Check to see if there's room to enqueue num_trbs on the ring and make sure
+ * enqueue pointer will not advance into dequeue segment. See rules above.
+ */
+static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
+		unsigned int num_trbs)
+{
+	int num_trbs_in_deq_seg;
+
+	if (ring->num_trbs_free < num_trbs)
+		return 0;
+
+	if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) {
+		num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs;
+		if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg)
+			return 0;
+	}
+
+	return 1;
+}
+
+/* Ring the host controller doorbell after placing a command on the ring */
+void xhci_ring_cmd_db(struct xhci_hcd *xhci)
+{
+	if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING))
+		return;
+
+	xhci_dbg(xhci, "// Ding dong!\n");
+
+	trace_xhci_ring_host_doorbell(0, DB_VALUE_HOST);
+
+	writel(DB_VALUE_HOST, &xhci->dba->doorbell[0]);
+	/* Flush PCI posted writes */
+	readl(&xhci->dba->doorbell[0]);
+}
+
+static bool xhci_mod_cmd_timer(struct xhci_hcd *xhci, unsigned long delay)
+{
+	return mod_delayed_work(system_wq, &xhci->cmd_timer, delay);
+}
+
+static struct xhci_command *xhci_next_queued_cmd(struct xhci_hcd *xhci)
+{
+	return list_first_entry_or_null(&xhci->cmd_list, struct xhci_command,
+					cmd_list);
+}
+
+/*
+ * Turn all commands on command ring with status set to "aborted" to no-op trbs.
+ * If there are other commands waiting then restart the ring and kick the timer.
+ * This must be called with command ring stopped and xhci->lock held.
+ */
+static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
+					 struct xhci_command *cur_cmd)
+{
+	struct xhci_command *i_cmd;
+
+	/* Turn all aborted commands in list to no-ops, then restart */
+	list_for_each_entry(i_cmd, &xhci->cmd_list, cmd_list) {
+
+		if (i_cmd->status != COMP_COMMAND_ABORTED)
+			continue;
+
+		i_cmd->status = COMP_COMMAND_RING_STOPPED;
+
+		xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
+			 i_cmd->command_trb);
+
+		trb_to_noop(i_cmd->command_trb, TRB_CMD_NOOP);
+
+		/*
+		 * caller waiting for completion is called when command
+		 *  completion event is received for these no-op commands
+		 */
+	}
+
+	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
+
+	/* ring command ring doorbell to restart the command ring */
+	if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
+	    !(xhci->xhc_state & XHCI_STATE_DYING)) {
+		xhci->current_cmd = cur_cmd;
+		xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
+		xhci_ring_cmd_db(xhci);
+	}
+}
+
+/* Must be called with xhci->lock held, releases and aquires lock back */
+static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
+{
+	struct xhci_segment *new_seg	= xhci->cmd_ring->deq_seg;
+	union xhci_trb *new_deq		= xhci->cmd_ring->dequeue;
+	u64 crcr;
+	int ret;
+
+	xhci_dbg(xhci, "Abort command ring\n");
+
+	reinit_completion(&xhci->cmd_ring_stop_completion);
+
+	/*
+	 * The control bits like command stop, abort are located in lower
+	 * dword of the command ring control register.
+	 * Some controllers require all 64 bits to be written to abort the ring.
+	 * Make sure the upper dword is valid, pointing to the next command,
+	 * avoiding corrupting the command ring pointer in case the command ring
+	 * is stopped by the time the upper dword is written.
+	 */
+	next_trb(xhci, NULL, &new_seg, &new_deq);
+	if (trb_is_link(new_deq))
+		next_trb(xhci, NULL, &new_seg, &new_deq);
+
+	crcr = xhci_trb_virt_to_dma(new_seg, new_deq);
+	xhci_write_64(xhci, crcr | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
+
+	/* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
+	 * completion of the Command Abort operation. If CRR is not negated in 5
+	 * seconds then driver handles it as if host died (-ENODEV).
+	 * In the future we should distinguish between -ENODEV and -ETIMEDOUT
+	 * and try to recover a -ETIMEDOUT with a host controller reset.
+	 */
+	ret = xhci_handshake(&xhci->op_regs->cmd_ring,
+			CMD_RING_RUNNING, 0, 5 * 1000 * 1000);
+	if (ret < 0) {
+		xhci_err(xhci, "Abort failed to stop command ring: %d\n", ret);
+		xhci_halt(xhci);
+		xhci_hc_died(xhci);
+		return ret;
+	}
+	/*
+	 * Writing the CMD_RING_ABORT bit should cause a cmd completion event,
+	 * however on some host hw the CMD_RING_RUNNING bit is correctly cleared
+	 * but the completion event in never sent. Wait 2 secs (arbitrary
+	 * number) to handle those cases after negation of CMD_RING_RUNNING.
+	 */
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	ret = wait_for_completion_timeout(&xhci->cmd_ring_stop_completion,
+					  msecs_to_jiffies(2000));
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (!ret) {
+		xhci_dbg(xhci, "No stop event for abort, ring start fail?\n");
+		xhci_cleanup_command_queue(xhci);
+	} else {
+		xhci_handle_stopped_cmd_ring(xhci, xhci_next_queued_cmd(xhci));
+	}
+	return 0;
+}
+
+void xhci_ring_ep_doorbell(struct xhci_hcd *xhci,
+		unsigned int slot_id,
+		unsigned int ep_index,
+		unsigned int stream_id)
+{
+	__le32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
+	struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
+	unsigned int ep_state = ep->ep_state;
+
+	/* Don't ring the doorbell for this endpoint if there are pending
+	 * cancellations because we don't want to interrupt processing.
+	 * We don't want to restart any stream rings if there's a set dequeue
+	 * pointer command pending because the device can choose to start any
+	 * stream once the endpoint is on the HW schedule.
+	 */
+	if ((ep_state & EP_STOP_CMD_PENDING) || (ep_state & SET_DEQ_PENDING) ||
+	    (ep_state & EP_HALTED) || (ep_state & EP_CLEARING_TT))
+		return;
+
+	trace_xhci_ring_ep_doorbell(slot_id, DB_VALUE(ep_index, stream_id));
+
+	writel(DB_VALUE(ep_index, stream_id), db_addr);
+	/* flush the write */
+	readl(db_addr);
+}
+
+/* Ring the doorbell for any rings with pending URBs */
+static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
+		unsigned int slot_id,
+		unsigned int ep_index)
+{
+	unsigned int stream_id;
+	struct xhci_virt_ep *ep;
+
+	ep = &xhci->devs[slot_id]->eps[ep_index];
+
+	/* A ring has pending URBs if its TD list is not empty */
+	if (!(ep->ep_state & EP_HAS_STREAMS)) {
+		if (ep->ring && !(list_empty(&ep->ring->td_list)))
+			xhci_ring_ep_doorbell(xhci, slot_id, ep_index, 0);
+		return;
+	}
+
+	for (stream_id = 1; stream_id < ep->stream_info->num_streams;
+			stream_id++) {
+		struct xhci_stream_info *stream_info = ep->stream_info;
+		if (!list_empty(&stream_info->stream_rings[stream_id]->td_list))
+			xhci_ring_ep_doorbell(xhci, slot_id, ep_index,
+						stream_id);
+	}
+}
+
+void xhci_ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
+		unsigned int slot_id,
+		unsigned int ep_index)
+{
+	ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
+}
+
+static struct xhci_virt_ep *xhci_get_virt_ep(struct xhci_hcd *xhci,
+					     unsigned int slot_id,
+					     unsigned int ep_index)
+{
+	if (slot_id == 0 || slot_id >= MAX_HC_SLOTS) {
+		xhci_warn(xhci, "Invalid slot_id %u\n", slot_id);
+		return NULL;
+	}
+	if (ep_index >= EP_CTX_PER_DEV) {
+		xhci_warn(xhci, "Invalid endpoint index %u\n", ep_index);
+		return NULL;
+	}
+	if (!xhci->devs[slot_id]) {
+		xhci_warn(xhci, "No xhci virt device for slot_id %u\n", slot_id);
+		return NULL;
+	}
+
+	return &xhci->devs[slot_id]->eps[ep_index];
+}
+
+static struct xhci_ring *xhci_virt_ep_to_ring(struct xhci_hcd *xhci,
+					      struct xhci_virt_ep *ep,
+					      unsigned int stream_id)
+{
+	/* common case, no streams */
+	if (!(ep->ep_state & EP_HAS_STREAMS))
+		return ep->ring;
+
+	if (!ep->stream_info)
+		return NULL;
+
+	if (stream_id == 0 || stream_id >= ep->stream_info->num_streams) {
+		xhci_warn(xhci, "Invalid stream_id %u request for slot_id %u ep_index %u\n",
+			  stream_id, ep->vdev->slot_id, ep->ep_index);
+		return NULL;
+	}
+
+	return ep->stream_info->stream_rings[stream_id];
+}
+
+/* Get the right ring for the given slot_id, ep_index and stream_id.
+ * If the endpoint supports streams, boundary check the URB's stream ID.
+ * If the endpoint doesn't support streams, return the singular endpoint ring.
+ */
+struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		unsigned int stream_id)
+{
+	struct xhci_virt_ep *ep;
+
+	ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+	if (!ep)
+		return NULL;
+
+	return xhci_virt_ep_to_ring(xhci, ep, stream_id);
+}
+
+
+/*
+ * Get the hw dequeue pointer xHC stopped on, either directly from the
+ * endpoint context, or if streams are in use from the stream context.
+ * The returned hw_dequeue contains the lowest four bits with cycle state
+ * and possbile stream context type.
+ */
+static u64 xhci_get_hw_deq(struct xhci_hcd *xhci, struct xhci_virt_device *vdev,
+			   unsigned int ep_index, unsigned int stream_id)
+{
+	struct xhci_ep_ctx *ep_ctx;
+	struct xhci_stream_ctx *st_ctx;
+	struct xhci_virt_ep *ep;
+
+	ep = &vdev->eps[ep_index];
+
+	if (ep->ep_state & EP_HAS_STREAMS) {
+		st_ctx = &ep->stream_info->stream_ctx_array[stream_id];
+		return le64_to_cpu(st_ctx->stream_ring);
+	}
+	ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index);
+	return le64_to_cpu(ep_ctx->deq);
+}
+
+static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci,
+				unsigned int slot_id, unsigned int ep_index,
+				unsigned int stream_id, struct xhci_td *td)
+{
+	struct xhci_virt_device *dev = xhci->devs[slot_id];
+	struct xhci_virt_ep *ep = &dev->eps[ep_index];
+	struct xhci_ring *ep_ring;
+	struct xhci_command *cmd;
+	struct xhci_segment *new_seg;
+	union xhci_trb *new_deq;
+	int new_cycle;
+	dma_addr_t addr;
+	u64 hw_dequeue;
+	bool cycle_found = false;
+	bool td_last_trb_found = false;
+	u32 trb_sct = 0;
+	int ret;
+
+	ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
+			ep_index, stream_id);
+	if (!ep_ring) {
+		xhci_warn(xhci, "WARN can't find new dequeue, invalid stream ID %u\n",
+			  stream_id);
+		return -ENODEV;
+	}
+	/*
+	 * A cancelled TD can complete with a stall if HW cached the trb.
+	 * In this case driver can't find td, but if the ring is empty we
+	 * can move the dequeue pointer to the current enqueue position.
+	 * We shouldn't hit this anymore as cached cancelled TRBs are given back
+	 * after clearing the cache, but be on the safe side and keep it anyway
+	 */
+	if (!td) {
+		if (list_empty(&ep_ring->td_list)) {
+			new_seg = ep_ring->enq_seg;
+			new_deq = ep_ring->enqueue;
+			new_cycle = ep_ring->cycle_state;
+			xhci_dbg(xhci, "ep ring empty, Set new dequeue = enqueue");
+			goto deq_found;
+		} else {
+			xhci_warn(xhci, "Can't find new dequeue state, missing td\n");
+			return -EINVAL;
+		}
+	}
+
+	hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id);
+	new_seg = ep_ring->deq_seg;
+	new_deq = ep_ring->dequeue;
+	new_cycle = hw_dequeue & 0x1;
+
+	/*
+	 * We want to find the pointer, segment and cycle state of the new trb
+	 * (the one after current TD's last_trb). We know the cycle state at
+	 * hw_dequeue, so walk the ring until both hw_dequeue and last_trb are
+	 * found.
+	 */
+	do {
+		if (!cycle_found && xhci_trb_virt_to_dma(new_seg, new_deq)
+		    == (dma_addr_t)(hw_dequeue & ~0xf)) {
+			cycle_found = true;
+			if (td_last_trb_found)
+				break;
+		}
+		if (new_deq == td->last_trb)
+			td_last_trb_found = true;
+
+		if (cycle_found && trb_is_link(new_deq) &&
+		    link_trb_toggles_cycle(new_deq))
+			new_cycle ^= 0x1;
+
+		next_trb(xhci, ep_ring, &new_seg, &new_deq);
+
+		/* Search wrapped around, bail out */
+		if (new_deq == ep->ring->dequeue) {
+			xhci_err(xhci, "Error: Failed finding new dequeue state\n");
+			return -EINVAL;
+		}
+
+	} while (!cycle_found || !td_last_trb_found);
+
+deq_found:
+
+	/* Don't update the ring cycle state for the producer (us). */
+	addr = xhci_trb_virt_to_dma(new_seg, new_deq);
+	if (addr == 0) {
+		xhci_warn(xhci, "Can't find dma of new dequeue ptr\n");
+		xhci_warn(xhci, "deq seg = %p, deq ptr = %p\n", new_seg, new_deq);
+		return -EINVAL;
+	}
+
+	if ((ep->ep_state & SET_DEQ_PENDING)) {
+		xhci_warn(xhci, "Set TR Deq already pending, don't submit for 0x%pad\n",
+			  &addr);
+		return -EBUSY;
+	}
+
+	/* This function gets called from contexts where it cannot sleep */
+	cmd = xhci_alloc_command(xhci, false, GFP_ATOMIC);
+	if (!cmd) {
+		xhci_warn(xhci, "Can't alloc Set TR Deq cmd 0x%pad\n", &addr);
+		return -ENOMEM;
+	}
+
+	if (stream_id)
+		trb_sct = SCT_FOR_TRB(SCT_PRI_TR);
+	ret = queue_command(xhci, cmd,
+		lower_32_bits(addr) | trb_sct | new_cycle,
+		upper_32_bits(addr),
+		STREAM_ID_FOR_TRB(stream_id), SLOT_ID_FOR_TRB(slot_id) |
+		EP_ID_FOR_TRB(ep_index) | TRB_TYPE(TRB_SET_DEQ), false);
+	if (ret < 0) {
+		xhci_free_command(xhci, cmd);
+		return ret;
+	}
+	ep->queued_deq_seg = new_seg;
+	ep->queued_deq_ptr = new_deq;
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
+		       "Set TR Deq ptr 0x%llx, cycle %u\n", addr, new_cycle);
+
+	/* Stop the TD queueing code from ringing the doorbell until
+	 * this command completes.  The HC won't set the dequeue pointer
+	 * if the ring is running, and ringing the doorbell starts the
+	 * ring running.
+	 */
+	ep->ep_state |= SET_DEQ_PENDING;
+	xhci_ring_cmd_db(xhci);
+	return 0;
+}
+
+/* flip_cycle means flip the cycle bit of all but the first and last TRB.
+ * (The last TRB actually points to the ring enqueue pointer, which is not part
+ * of this TD.)  This is used to remove partially enqueued isoc TDs from a ring.
+ */
+static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+		       struct xhci_td *td, bool flip_cycle)
+{
+	struct xhci_segment *seg	= td->start_seg;
+	union xhci_trb *trb		= td->first_trb;
+
+	while (1) {
+		trb_to_noop(trb, TRB_TR_NOOP);
+
+		/* flip cycle if asked to */
+		if (flip_cycle && trb != td->first_trb && trb != td->last_trb)
+			trb->generic.field[3] ^= cpu_to_le32(TRB_CYCLE);
+
+		if (trb == td->last_trb)
+			break;
+
+		next_trb(xhci, ep_ring, &seg, &trb);
+	}
+}
+
+/*
+ * Must be called with xhci->lock held in interrupt context,
+ * releases and re-acquires xhci->lock
+ */
+static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
+				     struct xhci_td *cur_td, int status)
+{
+	struct urb	*urb		= cur_td->urb;
+	struct urb_priv	*urb_priv	= urb->hcpriv;
+	struct usb_hcd	*hcd		= bus_to_hcd(urb->dev->bus);
+
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+		xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
+		if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs	== 0) {
+			if (xhci->quirks & XHCI_AMD_PLL_FIX)
+				usb_amd_quirk_pll_enable();
+		}
+	}
+	xhci_urb_free_priv(urb_priv);
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+	trace_xhci_urb_giveback(urb);
+	usb_hcd_giveback_urb(hcd, urb, status);
+}
+
+static void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci,
+		struct xhci_ring *ring, struct xhci_td *td)
+{
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+	struct xhci_segment *seg = td->bounce_seg;
+	struct urb *urb = td->urb;
+	size_t len;
+
+	if (!ring || !seg || !urb)
+		return;
+
+	if (usb_urb_dir_out(urb)) {
+		dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
+				 DMA_TO_DEVICE);
+		return;
+	}
+
+	dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
+			 DMA_FROM_DEVICE);
+	/* for in tranfers we need to copy the data from bounce to sg */
+	if (urb->num_sgs) {
+		len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs, seg->bounce_buf,
+					   seg->bounce_len, seg->bounce_offs);
+		if (len != seg->bounce_len)
+			xhci_warn(xhci, "WARN Wrong bounce buffer read length: %zu != %d\n",
+				  len, seg->bounce_len);
+	} else {
+		memcpy(urb->transfer_buffer + seg->bounce_offs, seg->bounce_buf,
+		       seg->bounce_len);
+	}
+	seg->bounce_len = 0;
+	seg->bounce_offs = 0;
+}
+
+static int xhci_td_cleanup(struct xhci_hcd *xhci, struct xhci_td *td,
+			   struct xhci_ring *ep_ring, int status)
+{
+	struct urb *urb = NULL;
+
+	/* Clean up the endpoint's TD list */
+	urb = td->urb;
+
+	/* if a bounce buffer was used to align this td then unmap it */
+	xhci_unmap_td_bounce_buffer(xhci, ep_ring, td);
+
+	/* Do one last check of the actual transfer length.
+	 * If the host controller said we transferred more data than the buffer
+	 * length, urb->actual_length will be a very big number (since it's
+	 * unsigned).  Play it safe and say we didn't transfer anything.
+	 */
+	if (urb->actual_length > urb->transfer_buffer_length) {
+		xhci_warn(xhci, "URB req %u and actual %u transfer length mismatch\n",
+			  urb->transfer_buffer_length, urb->actual_length);
+		urb->actual_length = 0;
+		status = 0;
+	}
+	/* TD might be removed from td_list if we are giving back a cancelled URB */
+	if (!list_empty(&td->td_list))
+		list_del_init(&td->td_list);
+	/* Giving back a cancelled URB, or if a slated TD completed anyway */
+	if (!list_empty(&td->cancelled_td_list))
+		list_del_init(&td->cancelled_td_list);
+
+	inc_td_cnt(urb);
+	/* Giveback the urb when all the tds are completed */
+	if (last_td_in_urb(td)) {
+		if ((urb->actual_length != urb->transfer_buffer_length &&
+		     (urb->transfer_flags & URB_SHORT_NOT_OK)) ||
+		    (status != 0 && !usb_endpoint_xfer_isoc(&urb->ep->desc)))
+			xhci_dbg(xhci, "Giveback URB %p, len = %d, expected = %d, status = %d\n",
+				 urb, urb->actual_length,
+				 urb->transfer_buffer_length, status);
+
+		/* set isoc urb status to 0 just as EHCI, UHCI, and OHCI */
+		if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+			status = 0;
+		xhci_giveback_urb_in_irq(xhci, td, status);
+	}
+
+	return 0;
+}
+
+
+/* Complete the cancelled URBs we unlinked from td_list. */
+static void xhci_giveback_invalidated_tds(struct xhci_virt_ep *ep)
+{
+	struct xhci_ring *ring;
+	struct xhci_td *td, *tmp_td;
+
+	list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list,
+				 cancelled_td_list) {
+
+		ring = xhci_urb_to_transfer_ring(ep->xhci, td->urb);
+
+		if (td->cancel_status == TD_CLEARED) {
+			xhci_dbg(ep->xhci, "%s: Giveback cancelled URB %p TD\n",
+				 __func__, td->urb);
+			xhci_td_cleanup(ep->xhci, td, ring, td->status);
+		} else {
+			xhci_dbg(ep->xhci, "%s: Keep cancelled URB %p TD as cancel_status is %d\n",
+				 __func__, td->urb, td->cancel_status);
+		}
+		if (ep->xhci->xhc_state & XHCI_STATE_DYING)
+			return;
+	}
+}
+
+static int xhci_reset_halted_ep(struct xhci_hcd *xhci, unsigned int slot_id,
+				unsigned int ep_index, enum xhci_ep_reset_type reset_type)
+{
+	struct xhci_command *command;
+	int ret = 0;
+
+	command = xhci_alloc_command(xhci, false, GFP_ATOMIC);
+	if (!command) {
+		ret = -ENOMEM;
+		goto done;
+	}
+
+	xhci_dbg(xhci, "%s-reset ep %u, slot %u\n",
+		 (reset_type == EP_HARD_RESET) ? "Hard" : "Soft",
+		 ep_index, slot_id);
+
+	ret = xhci_queue_reset_ep(xhci, command, slot_id, ep_index, reset_type);
+done:
+	if (ret)
+		xhci_err(xhci, "ERROR queuing reset endpoint for slot %d ep_index %d, %d\n",
+			 slot_id, ep_index, ret);
+	return ret;
+}
+
+static int xhci_handle_halted_endpoint(struct xhci_hcd *xhci,
+				struct xhci_virt_ep *ep, unsigned int stream_id,
+				struct xhci_td *td,
+				enum xhci_ep_reset_type reset_type)
+{
+	unsigned int slot_id = ep->vdev->slot_id;
+	int err;
+
+	/*
+	 * Avoid resetting endpoint if link is inactive. Can cause host hang.
+	 * Device will be reset soon to recover the link so don't do anything
+	 */
+	if (ep->vdev->flags & VDEV_PORT_ERROR)
+		return -ENODEV;
+
+	/* add td to cancelled list and let reset ep handler take care of it */
+	if (reset_type == EP_HARD_RESET) {
+		ep->ep_state |= EP_HARD_CLEAR_TOGGLE;
+		if (td && list_empty(&td->cancelled_td_list)) {
+			list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list);
+			td->cancel_status = TD_HALTED;
+		}
+	}
+
+	if (ep->ep_state & EP_HALTED) {
+		xhci_dbg(xhci, "Reset ep command for ep_index %d already pending\n",
+			 ep->ep_index);
+		return 0;
+	}
+
+	err = xhci_reset_halted_ep(xhci, slot_id, ep->ep_index, reset_type);
+	if (err)
+		return err;
+
+	ep->ep_state |= EP_HALTED;
+
+	xhci_ring_cmd_db(xhci);
+
+	return 0;
+}
+
+/*
+ * Fix up the ep ring first, so HW stops executing cancelled TDs.
+ * We have the xHCI lock, so nothing can modify this list until we drop it.
+ * We're also in the event handler, so we can't get re-interrupted if another
+ * Stop Endpoint command completes.
+ *
+ * only call this when ring is not in a running state
+ */
+
+static int xhci_invalidate_cancelled_tds(struct xhci_virt_ep *ep)
+{
+	struct xhci_hcd		*xhci;
+	struct xhci_td		*td = NULL;
+	struct xhci_td		*tmp_td = NULL;
+	struct xhci_td		*cached_td = NULL;
+	struct xhci_ring	*ring;
+	u64			hw_deq;
+	unsigned int		slot_id = ep->vdev->slot_id;
+	int			err;
+
+	xhci = ep->xhci;
+
+	list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list, cancelled_td_list) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
+			       "Removing canceled TD starting at 0x%llx (dma) in stream %u URB %p",
+			       (unsigned long long)xhci_trb_virt_to_dma(
+				       td->start_seg, td->first_trb),
+			       td->urb->stream_id, td->urb);
+		list_del_init(&td->td_list);
+		ring = xhci_urb_to_transfer_ring(xhci, td->urb);
+		if (!ring) {
+			xhci_warn(xhci, "WARN Cancelled URB %p has invalid stream ID %u.\n",
+				  td->urb, td->urb->stream_id);
+			continue;
+		}
+		/*
+		 * If a ring stopped on the TD we need to cancel then we have to
+		 * move the xHC endpoint ring dequeue pointer past this TD.
+		 * Rings halted due to STALL may show hw_deq is past the stalled
+		 * TD, but still require a set TR Deq command to flush xHC cache.
+		 */
+		hw_deq = xhci_get_hw_deq(xhci, ep->vdev, ep->ep_index,
+					 td->urb->stream_id);
+		hw_deq &= ~0xf;
+
+		if (td->cancel_status == TD_HALTED ||
+		    trb_in_td(xhci, td->start_seg, td->first_trb, td->last_trb, hw_deq, false)) {
+			switch (td->cancel_status) {
+			case TD_CLEARED: /* TD is already no-op */
+			case TD_CLEARING_CACHE: /* set TR deq command already queued */
+				break;
+			case TD_DIRTY: /* TD is cached, clear it */
+			case TD_HALTED:
+				td->cancel_status = TD_CLEARING_CACHE;
+				if (cached_td)
+					/* FIXME  stream case, several stopped rings */
+					xhci_dbg(xhci,
+						 "Move dq past stream %u URB %p instead of stream %u URB %p\n",
+						 td->urb->stream_id, td->urb,
+						 cached_td->urb->stream_id, cached_td->urb);
+				cached_td = td;
+				break;
+			}
+		} else {
+			td_to_noop(xhci, ring, td, false);
+			td->cancel_status = TD_CLEARED;
+		}
+	}
+
+	/* If there's no need to move the dequeue pointer then we're done */
+	if (!cached_td)
+		return 0;
+
+	err = xhci_move_dequeue_past_td(xhci, slot_id, ep->ep_index,
+					cached_td->urb->stream_id,
+					cached_td);
+	if (err) {
+		/* Failed to move past cached td, just set cached TDs to no-op */
+		list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list, cancelled_td_list) {
+			if (td->cancel_status != TD_CLEARING_CACHE)
+				continue;
+			xhci_dbg(xhci, "Failed to clear cancelled cached URB %p, mark clear anyway\n",
+				 td->urb);
+			td_to_noop(xhci, ring, td, false);
+			td->cancel_status = TD_CLEARED;
+		}
+	}
+	return 0;
+}
+
+/*
+ * Returns the TD the endpoint ring halted on.
+ * Only call for non-running rings without streams.
+ */
+static struct xhci_td *find_halted_td(struct xhci_virt_ep *ep)
+{
+	struct xhci_td	*td;
+	u64		hw_deq;
+
+	if (!list_empty(&ep->ring->td_list)) { /* Not streams compatible */
+		hw_deq = xhci_get_hw_deq(ep->xhci, ep->vdev, ep->ep_index, 0);
+		hw_deq &= ~0xf;
+		td = list_first_entry(&ep->ring->td_list, struct xhci_td, td_list);
+		if (trb_in_td(ep->xhci, td->start_seg, td->first_trb,
+				td->last_trb, hw_deq, false))
+			return td;
+	}
+	return NULL;
+}
+
+/*
+ * When we get a command completion for a Stop Endpoint Command, we need to
+ * unlink any cancelled TDs from the ring.  There are two ways to do that:
+ *
+ *  1. If the HW was in the middle of processing the TD that needs to be
+ *     cancelled, then we must move the ring's dequeue pointer past the last TRB
+ *     in the TD with a Set Dequeue Pointer Command.
+ *  2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain
+ *     bit cleared) so that the HW will skip over them.
+ */
+static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
+				    union xhci_trb *trb, u32 comp_code)
+{
+	unsigned int ep_index;
+	struct xhci_virt_ep *ep;
+	struct xhci_ep_ctx *ep_ctx;
+	struct xhci_td *td = NULL;
+	enum xhci_ep_reset_type reset_type;
+	struct xhci_command *command;
+	int err;
+
+	if (unlikely(TRB_TO_SUSPEND_PORT(le32_to_cpu(trb->generic.field[3])))) {
+		if (!xhci->devs[slot_id])
+			xhci_warn(xhci, "Stop endpoint command completion for disabled slot %u\n",
+				  slot_id);
+		return;
+	}
+
+	ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
+	ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+	if (!ep)
+		return;
+
+	ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep_index);
+
+	trace_xhci_handle_cmd_stop_ep(ep_ctx);
+
+	if (comp_code == COMP_CONTEXT_STATE_ERROR) {
+	/*
+	 * If stop endpoint command raced with a halting endpoint we need to
+	 * reset the host side endpoint first.
+	 * If the TD we halted on isn't cancelled the TD should be given back
+	 * with a proper error code, and the ring dequeue moved past the TD.
+	 * If streams case we can't find hw_deq, or the TD we halted on so do a
+	 * soft reset.
+	 *
+	 * Proper error code is unknown here, it would be -EPIPE if device side
+	 * of enadpoit halted (aka STALL), and -EPROTO if not (transaction error)
+	 * We use -EPROTO, if device is stalled it should return a stall error on
+	 * next transfer, which then will return -EPIPE, and device side stall is
+	 * noted and cleared by class driver.
+	 */
+		switch (GET_EP_CTX_STATE(ep_ctx)) {
+		case EP_STATE_HALTED:
+			xhci_dbg(xhci, "Stop ep completion raced with stall, reset ep\n");
+			if (ep->ep_state & EP_HAS_STREAMS) {
+				reset_type = EP_SOFT_RESET;
+			} else {
+				reset_type = EP_HARD_RESET;
+				td = find_halted_td(ep);
+				if (td)
+					td->status = -EPROTO;
+			}
+			/* reset ep, reset handler cleans up cancelled tds */
+			err = xhci_handle_halted_endpoint(xhci, ep, 0, td,
+							  reset_type);
+			if (err)
+				break;
+			ep->ep_state &= ~EP_STOP_CMD_PENDING;
+			return;
+		case EP_STATE_RUNNING:
+			/* Race, HW handled stop ep cmd before ep was running */
+			xhci_dbg(xhci, "Stop ep completion ctx error, ep is running\n");
+
+			command = xhci_alloc_command(xhci, false, GFP_ATOMIC);
+			if (!command) {
+				ep->ep_state &= ~EP_STOP_CMD_PENDING;
+				return;
+			}
+			xhci_queue_stop_endpoint(xhci, command, slot_id, ep_index, 0);
+			xhci_ring_cmd_db(xhci);
+
+			return;
+		default:
+			break;
+		}
+	}
+
+	/* will queue a set TR deq if stopped on a cancelled, uncleared TD */
+	xhci_invalidate_cancelled_tds(ep);
+	ep->ep_state &= ~EP_STOP_CMD_PENDING;
+
+	/* Otherwise ring the doorbell(s) to restart queued transfers */
+	xhci_giveback_invalidated_tds(ep);
+	ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
+}
+
+static void xhci_kill_ring_urbs(struct xhci_hcd *xhci, struct xhci_ring *ring)
+{
+	struct xhci_td *cur_td;
+	struct xhci_td *tmp;
+
+	list_for_each_entry_safe(cur_td, tmp, &ring->td_list, td_list) {
+		list_del_init(&cur_td->td_list);
+
+		if (!list_empty(&cur_td->cancelled_td_list))
+			list_del_init(&cur_td->cancelled_td_list);
+
+		xhci_unmap_td_bounce_buffer(xhci, ring, cur_td);
+
+		inc_td_cnt(cur_td->urb);
+		if (last_td_in_urb(cur_td))
+			xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN);
+	}
+}
+
+static void xhci_kill_endpoint_urbs(struct xhci_hcd *xhci,
+		int slot_id, int ep_index)
+{
+	struct xhci_td *cur_td;
+	struct xhci_td *tmp;
+	struct xhci_virt_ep *ep;
+	struct xhci_ring *ring;
+
+	ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+	if (!ep)
+		return;
+
+	if ((ep->ep_state & EP_HAS_STREAMS) ||
+			(ep->ep_state & EP_GETTING_NO_STREAMS)) {
+		int stream_id;
+
+		for (stream_id = 1; stream_id < ep->stream_info->num_streams;
+				stream_id++) {
+			ring = ep->stream_info->stream_rings[stream_id];
+			if (!ring)
+				continue;
+
+			xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
+					"Killing URBs for slot ID %u, ep index %u, stream %u",
+					slot_id, ep_index, stream_id);
+			xhci_kill_ring_urbs(xhci, ring);
+		}
+	} else {
+		ring = ep->ring;
+		if (!ring)
+			return;
+		xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
+				"Killing URBs for slot ID %u, ep index %u",
+				slot_id, ep_index);
+		xhci_kill_ring_urbs(xhci, ring);
+	}
+
+	list_for_each_entry_safe(cur_td, tmp, &ep->cancelled_td_list,
+			cancelled_td_list) {
+		list_del_init(&cur_td->cancelled_td_list);
+		inc_td_cnt(cur_td->urb);
+
+		if (last_td_in_urb(cur_td))
+			xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN);
+	}
+}
+
+/*
+ * host controller died, register read returns 0xffffffff
+ * Complete pending commands, mark them ABORTED.
+ * URBs need to be given back as usb core might be waiting with device locks
+ * held for the URBs to finish during device disconnect, blocking host remove.
+ *
+ * Call with xhci->lock held.
+ * lock is relased and re-acquired while giving back urb.
+ */
+void xhci_hc_died(struct xhci_hcd *xhci)
+{
+	int i, j;
+
+	if (xhci->xhc_state & XHCI_STATE_DYING)
+		return;
+
+	xhci_err(xhci, "xHCI host controller not responding, assume dead\n");
+	xhci->xhc_state |= XHCI_STATE_DYING;
+
+	xhci_cleanup_command_queue(xhci);
+
+	/* return any pending urbs, remove may be waiting for them */
+	for (i = 0; i <= HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
+		if (!xhci->devs[i])
+			continue;
+		for (j = 0; j < 31; j++)
+			xhci_kill_endpoint_urbs(xhci, i, j);
+	}
+
+	/* inform usb core hc died if PCI remove isn't already handling it */
+	if (!(xhci->xhc_state & XHCI_STATE_REMOVING))
+		usb_hc_died(xhci_to_hcd(xhci));
+}
+
+static void update_ring_for_set_deq_completion(struct xhci_hcd *xhci,
+		struct xhci_virt_device *dev,
+		struct xhci_ring *ep_ring,
+		unsigned int ep_index)
+{
+	union xhci_trb *dequeue_temp;
+	int num_trbs_free_temp;
+	bool revert = false;
+
+	num_trbs_free_temp = ep_ring->num_trbs_free;
+	dequeue_temp = ep_ring->dequeue;
+
+	/* If we get two back-to-back stalls, and the first stalled transfer
+	 * ends just before a link TRB, the dequeue pointer will be left on
+	 * the link TRB by the code in the while loop.  So we have to update
+	 * the dequeue pointer one segment further, or we'll jump off
+	 * the segment into la-la-land.
+	 */
+	if (trb_is_link(ep_ring->dequeue)) {
+		ep_ring->deq_seg = ep_ring->deq_seg->next;
+		ep_ring->dequeue = ep_ring->deq_seg->trbs;
+	}
+
+	while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) {
+		/* We have more usable TRBs */
+		ep_ring->num_trbs_free++;
+		ep_ring->dequeue++;
+		if (trb_is_link(ep_ring->dequeue)) {
+			if (ep_ring->dequeue ==
+					dev->eps[ep_index].queued_deq_ptr)
+				break;
+			ep_ring->deq_seg = ep_ring->deq_seg->next;
+			ep_ring->dequeue = ep_ring->deq_seg->trbs;
+		}
+		if (ep_ring->dequeue == dequeue_temp) {
+			revert = true;
+			break;
+		}
+	}
+
+	if (revert) {
+		xhci_dbg(xhci, "Unable to find new dequeue pointer\n");
+		ep_ring->num_trbs_free = num_trbs_free_temp;
+	}
+}
+
+/*
+ * When we get a completion for a Set Transfer Ring Dequeue Pointer command,
+ * we need to clear the set deq pending flag in the endpoint ring state, so that
+ * the TD queueing code can ring the doorbell again.  We also need to ring the
+ * endpoint doorbell to restart the ring, but only if there aren't more
+ * cancellations pending.
+ */
+static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
+		union xhci_trb *trb, u32 cmd_comp_code)
+{
+	unsigned int ep_index;
+	unsigned int stream_id;
+	struct xhci_ring *ep_ring;
+	struct xhci_virt_ep *ep;
+	struct xhci_ep_ctx *ep_ctx;
+	struct xhci_slot_ctx *slot_ctx;
+	struct xhci_td *td, *tmp_td;
+
+	ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
+	stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2]));
+	ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+	if (!ep)
+		return;
+
+	ep_ring = xhci_virt_ep_to_ring(xhci, ep, stream_id);
+	if (!ep_ring) {
+		xhci_warn(xhci, "WARN Set TR deq ptr command for freed stream ID %u\n",
+				stream_id);
+		/* XXX: Harmless??? */
+		goto cleanup;
+	}
+
+	ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep_index);
+	slot_ctx = xhci_get_slot_ctx(xhci, ep->vdev->out_ctx);
+	trace_xhci_handle_cmd_set_deq(slot_ctx);
+	trace_xhci_handle_cmd_set_deq_ep(ep_ctx);
+
+	if (cmd_comp_code != COMP_SUCCESS) {
+		unsigned int ep_state;
+		unsigned int slot_state;
+
+		switch (cmd_comp_code) {
+		case COMP_TRB_ERROR:
+			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because of stream ID configuration\n");
+			break;
+		case COMP_CONTEXT_STATE_ERROR:
+			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.\n");
+			ep_state = GET_EP_CTX_STATE(ep_ctx);
+			slot_state = le32_to_cpu(slot_ctx->dev_state);
+			slot_state = GET_SLOT_STATE(slot_state);
+			xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
+					"Slot state = %u, EP state = %u",
+					slot_state, ep_state);
+			break;
+		case COMP_SLOT_NOT_ENABLED_ERROR:
+			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because slot %u was not enabled.\n",
+					slot_id);
+			break;
+		default:
+			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown completion code of %u.\n",
+					cmd_comp_code);
+			break;
+		}
+		/* OK what do we do now?  The endpoint state is hosed, and we
+		 * should never get to this point if the synchronization between
+		 * queueing, and endpoint state are correct.  This might happen
+		 * if the device gets disconnected after we've finished
+		 * cancelling URBs, which might not be an error...
+		 */
+	} else {
+		u64 deq;
+		/* 4.6.10 deq ptr is written to the stream ctx for streams */
+		if (ep->ep_state & EP_HAS_STREAMS) {
+			struct xhci_stream_ctx *ctx =
+				&ep->stream_info->stream_ctx_array[stream_id];
+			deq = le64_to_cpu(ctx->stream_ring) & SCTX_DEQ_MASK;
+		} else {
+			deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK;
+		}
+		xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
+			"Successful Set TR Deq Ptr cmd, deq = @%08llx", deq);
+		if (xhci_trb_virt_to_dma(ep->queued_deq_seg,
+					 ep->queued_deq_ptr) == deq) {
+			/* Update the ring's dequeue segment and dequeue pointer
+			 * to reflect the new position.
+			 */
+			update_ring_for_set_deq_completion(xhci, ep->vdev,
+				ep_ring, ep_index);
+		} else {
+			xhci_warn(xhci, "Mismatch between completed Set TR Deq Ptr command & xHCI internal state.\n");
+			xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n",
+				  ep->queued_deq_seg, ep->queued_deq_ptr);
+		}
+	}
+	/* HW cached TDs cleared from cache, give them back */
+	list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list,
+				 cancelled_td_list) {
+		ep_ring = xhci_urb_to_transfer_ring(ep->xhci, td->urb);
+		if (td->cancel_status == TD_CLEARING_CACHE) {
+			td->cancel_status = TD_CLEARED;
+			xhci_dbg(ep->xhci, "%s: Giveback cancelled URB %p TD\n",
+				 __func__, td->urb);
+			xhci_td_cleanup(ep->xhci, td, ep_ring, td->status);
+		} else {
+			xhci_dbg(ep->xhci, "%s: Keep cancelled URB %p TD as cancel_status is %d\n",
+				 __func__, td->urb, td->cancel_status);
+		}
+	}
+cleanup:
+	ep->ep_state &= ~SET_DEQ_PENDING;
+	ep->queued_deq_seg = NULL;
+	ep->queued_deq_ptr = NULL;
+	/* Restart any rings with pending URBs */
+	ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
+}
+
+static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id,
+		union xhci_trb *trb, u32 cmd_comp_code)
+{
+	struct xhci_virt_ep *ep;
+	struct xhci_ep_ctx *ep_ctx;
+	unsigned int ep_index;
+
+	ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
+	ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+	if (!ep)
+		return;
+
+	ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep_index);
+	trace_xhci_handle_cmd_reset_ep(ep_ctx);
+
+	/* This command will only fail if the endpoint wasn't halted,
+	 * but we don't care.
+	 */
+	xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
+		"Ignoring reset ep completion code of %u", cmd_comp_code);
+
+	/* Cleanup cancelled TDs as ep is stopped. May queue a Set TR Deq cmd */
+	xhci_invalidate_cancelled_tds(ep);
+
+	/* Clear our internal halted state */
+	ep->ep_state &= ~EP_HALTED;
+
+	xhci_giveback_invalidated_tds(ep);
+
+	/* if this was a soft reset, then restart */
+	if ((le32_to_cpu(trb->generic.field[3])) & TRB_TSP)
+		ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
+}
+
+static void xhci_handle_cmd_enable_slot(struct xhci_hcd *xhci, int slot_id,
+		struct xhci_command *command, u32 cmd_comp_code)
+{
+	if (cmd_comp_code == COMP_SUCCESS)
+		command->slot_id = slot_id;
+	else
+		command->slot_id = 0;
+}
+
+static void xhci_handle_cmd_disable_slot(struct xhci_hcd *xhci, int slot_id)
+{
+	struct xhci_virt_device *virt_dev;
+	struct xhci_slot_ctx *slot_ctx;
+
+	virt_dev = xhci->devs[slot_id];
+	if (!virt_dev)
+		return;
+
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+	trace_xhci_handle_cmd_disable_slot(slot_ctx);
+
+	if (xhci->quirks & XHCI_EP_LIMIT_QUIRK)
+		/* Delete default control endpoint resources */
+		xhci_free_device_endpoint_resources(xhci, virt_dev, true);
+}
+
+static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id,
+		u32 cmd_comp_code)
+{
+	struct xhci_virt_device *virt_dev;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_ep_ctx *ep_ctx;
+	unsigned int ep_index;
+	u32 add_flags;
+
+	/*
+	 * Configure endpoint commands can come from the USB core configuration
+	 * or alt setting changes, or when streams were being configured.
+	 */
+
+	virt_dev = xhci->devs[slot_id];
+	if (!virt_dev)
+		return;
+	ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "Could not get input context, bad type.\n");
+		return;
+	}
+
+	add_flags = le32_to_cpu(ctrl_ctx->add_flags);
+
+	/* Input ctx add_flags are the endpoint index plus one */
+	ep_index = xhci_last_valid_endpoint(add_flags) - 1;
+
+	ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->out_ctx, ep_index);
+	trace_xhci_handle_cmd_config_ep(ep_ctx);
+
+	return;
+}
+
+static void xhci_handle_cmd_addr_dev(struct xhci_hcd *xhci, int slot_id)
+{
+	struct xhci_virt_device *vdev;
+	struct xhci_slot_ctx *slot_ctx;
+
+	vdev = xhci->devs[slot_id];
+	if (!vdev)
+		return;
+	slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
+	trace_xhci_handle_cmd_addr_dev(slot_ctx);
+}
+
+static void xhci_handle_cmd_reset_dev(struct xhci_hcd *xhci, int slot_id)
+{
+	struct xhci_virt_device *vdev;
+	struct xhci_slot_ctx *slot_ctx;
+
+	vdev = xhci->devs[slot_id];
+	if (!vdev) {
+		xhci_warn(xhci, "Reset device command completion for disabled slot %u\n",
+			  slot_id);
+		return;
+	}
+	slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
+	trace_xhci_handle_cmd_reset_dev(slot_ctx);
+
+	xhci_dbg(xhci, "Completed reset device command.\n");
+}
+
+static void xhci_handle_cmd_nec_get_fw(struct xhci_hcd *xhci,
+		struct xhci_event_cmd *event)
+{
+	if (!(xhci->quirks & XHCI_NEC_HOST)) {
+		xhci_warn(xhci, "WARN NEC_GET_FW command on non-NEC host\n");
+		return;
+	}
+	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+			"NEC firmware version %2x.%02x",
+			NEC_FW_MAJOR(le32_to_cpu(event->status)),
+			NEC_FW_MINOR(le32_to_cpu(event->status)));
+}
+
+static void xhci_complete_del_and_free_cmd(struct xhci_command *cmd, u32 status)
+{
+	list_del(&cmd->cmd_list);
+
+	if (cmd->completion) {
+		cmd->status = status;
+		complete(cmd->completion);
+	} else {
+		kfree(cmd);
+	}
+}
+
+void xhci_cleanup_command_queue(struct xhci_hcd *xhci)
+{
+	struct xhci_command *cur_cmd, *tmp_cmd;
+	xhci->current_cmd = NULL;
+	list_for_each_entry_safe(cur_cmd, tmp_cmd, &xhci->cmd_list, cmd_list)
+		xhci_complete_del_and_free_cmd(cur_cmd, COMP_COMMAND_ABORTED);
+}
+
+void xhci_handle_command_timeout(struct work_struct *work)
+{
+	struct xhci_hcd	*xhci;
+	unsigned long	flags;
+	char		str[XHCI_MSG_MAX];
+	u64		hw_ring_state;
+	u32		cmd_field3;
+	u32		usbsts;
+
+	xhci = container_of(to_delayed_work(work), struct xhci_hcd, cmd_timer);
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	/*
+	 * If timeout work is pending, or current_cmd is NULL, it means we
+	 * raced with command completion. Command is handled so just return.
+	 */
+	if (!xhci->current_cmd || delayed_work_pending(&xhci->cmd_timer)) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return;
+	}
+
+	cmd_field3 = le32_to_cpu(xhci->current_cmd->command_trb->generic.field[3]);
+	usbsts = readl(&xhci->op_regs->status);
+	xhci_dbg(xhci, "Command timeout, USBSTS:%s\n", xhci_decode_usbsts(str, usbsts));
+
+	/* Bail out and tear down xhci if a stop endpoint command failed */
+	if (TRB_FIELD_TO_TYPE(cmd_field3) == TRB_STOP_RING) {
+		struct xhci_virt_ep	*ep;
+
+		xhci_warn(xhci, "xHCI host not responding to stop endpoint command\n");
+
+		ep = xhci_get_virt_ep(xhci, TRB_TO_SLOT_ID(cmd_field3),
+				      TRB_TO_EP_INDEX(cmd_field3));
+		if (ep)
+			ep->ep_state &= ~EP_STOP_CMD_PENDING;
+
+		xhci_halt(xhci);
+		xhci_hc_died(xhci);
+		goto time_out_completed;
+	}
+
+	/* mark this command to be cancelled */
+	xhci->current_cmd->status = COMP_COMMAND_ABORTED;
+
+	/* Make sure command ring is running before aborting it */
+	hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+	if (hw_ring_state == ~(u64)0) {
+		xhci_hc_died(xhci);
+		goto time_out_completed;
+	}
+
+	if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
+	    (hw_ring_state & CMD_RING_RUNNING))  {
+		/* Prevent new doorbell, and start command abort */
+		xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
+		xhci_dbg(xhci, "Command timeout\n");
+		xhci_abort_cmd_ring(xhci, flags);
+		goto time_out_completed;
+	}
+
+	/* host removed. Bail out */
+	if (xhci->xhc_state & XHCI_STATE_REMOVING) {
+		xhci_dbg(xhci, "host removed, ring start fail?\n");
+		xhci_cleanup_command_queue(xhci);
+
+		goto time_out_completed;
+	}
+
+	/* command timeout on stopped ring, ring can't be aborted */
+	xhci_dbg(xhci, "Command timeout on stopped ring\n");
+	xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd);
+
+time_out_completed:
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return;
+}
+
+static void handle_cmd_completion(struct xhci_hcd *xhci,
+		struct xhci_event_cmd *event)
+{
+	unsigned int slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
+	u64 cmd_dma;
+	dma_addr_t cmd_dequeue_dma;
+	u32 cmd_comp_code;
+	union xhci_trb *cmd_trb;
+	struct xhci_command *cmd;
+	u32 cmd_type;
+
+	if (slot_id >= MAX_HC_SLOTS) {
+		xhci_warn(xhci, "Invalid slot_id %u\n", slot_id);
+		return;
+	}
+
+	cmd_dma = le64_to_cpu(event->cmd_trb);
+	cmd_trb = xhci->cmd_ring->dequeue;
+
+	trace_xhci_handle_command(xhci->cmd_ring, &cmd_trb->generic);
+
+	cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+			cmd_trb);
+	/*
+	 * Check whether the completion event is for our internal kept
+	 * command.
+	 */
+	if (!cmd_dequeue_dma || cmd_dma != (u64)cmd_dequeue_dma) {
+		xhci_warn(xhci,
+			  "ERROR mismatched command completion event\n");
+		return;
+	}
+
+	cmd = list_first_entry(&xhci->cmd_list, struct xhci_command, cmd_list);
+
+	cancel_delayed_work(&xhci->cmd_timer);
+
+	cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status));
+
+	/* If CMD ring stopped we own the trbs between enqueue and dequeue */
+	if (cmd_comp_code == COMP_COMMAND_RING_STOPPED) {
+		complete_all(&xhci->cmd_ring_stop_completion);
+		return;
+	}
+
+	if (cmd->command_trb != xhci->cmd_ring->dequeue) {
+		xhci_err(xhci,
+			 "Command completion event does not match command\n");
+		return;
+	}
+
+	/*
+	 * Host aborted the command ring, check if the current command was
+	 * supposed to be aborted, otherwise continue normally.
+	 * The command ring is stopped now, but the xHC will issue a Command
+	 * Ring Stopped event which will cause us to restart it.
+	 */
+	if (cmd_comp_code == COMP_COMMAND_ABORTED) {
+		xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+		if (cmd->status == COMP_COMMAND_ABORTED) {
+			if (xhci->current_cmd == cmd)
+				xhci->current_cmd = NULL;
+			goto event_handled;
+		}
+	}
+
+	cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3]));
+	switch (cmd_type) {
+	case TRB_ENABLE_SLOT:
+		xhci_handle_cmd_enable_slot(xhci, slot_id, cmd, cmd_comp_code);
+		break;
+	case TRB_DISABLE_SLOT:
+		xhci_handle_cmd_disable_slot(xhci, slot_id);
+		break;
+	case TRB_CONFIG_EP:
+		if (!cmd->completion)
+			xhci_handle_cmd_config_ep(xhci, slot_id, cmd_comp_code);
+		break;
+	case TRB_EVAL_CONTEXT:
+		break;
+	case TRB_ADDR_DEV:
+		xhci_handle_cmd_addr_dev(xhci, slot_id);
+		break;
+	case TRB_STOP_RING:
+		WARN_ON(slot_id != TRB_TO_SLOT_ID(
+				le32_to_cpu(cmd_trb->generic.field[3])));
+		if (!cmd->completion)
+			xhci_handle_cmd_stop_ep(xhci, slot_id, cmd_trb,
+						cmd_comp_code);
+		break;
+	case TRB_SET_DEQ:
+		WARN_ON(slot_id != TRB_TO_SLOT_ID(
+				le32_to_cpu(cmd_trb->generic.field[3])));
+		xhci_handle_cmd_set_deq(xhci, slot_id, cmd_trb, cmd_comp_code);
+		break;
+	case TRB_CMD_NOOP:
+		/* Is this an aborted command turned to NO-OP? */
+		if (cmd->status == COMP_COMMAND_RING_STOPPED)
+			cmd_comp_code = COMP_COMMAND_RING_STOPPED;
+		break;
+	case TRB_RESET_EP:
+		WARN_ON(slot_id != TRB_TO_SLOT_ID(
+				le32_to_cpu(cmd_trb->generic.field[3])));
+		xhci_handle_cmd_reset_ep(xhci, slot_id, cmd_trb, cmd_comp_code);
+		break;
+	case TRB_RESET_DEV:
+		/* SLOT_ID field in reset device cmd completion event TRB is 0.
+		 * Use the SLOT_ID from the command TRB instead (xhci 4.6.11)
+		 */
+		slot_id = TRB_TO_SLOT_ID(
+				le32_to_cpu(cmd_trb->generic.field[3]));
+		xhci_handle_cmd_reset_dev(xhci, slot_id);
+		break;
+	case TRB_NEC_GET_FW:
+		xhci_handle_cmd_nec_get_fw(xhci, event);
+		break;
+	default:
+		/* Skip over unknown commands on the event ring */
+		xhci_info(xhci, "INFO unknown command type %d\n", cmd_type);
+		break;
+	}
+
+	/* restart timer if this wasn't the last command */
+	if (!list_is_singular(&xhci->cmd_list)) {
+		xhci->current_cmd = list_first_entry(&cmd->cmd_list,
+						struct xhci_command, cmd_list);
+		xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
+	} else if (xhci->current_cmd == cmd) {
+		xhci->current_cmd = NULL;
+	}
+
+event_handled:
+	xhci_complete_del_and_free_cmd(cmd, cmd_comp_code);
+
+	inc_deq(xhci, xhci->cmd_ring);
+}
+
+static void handle_vendor_event(struct xhci_hcd *xhci,
+				union xhci_trb *event, u32 trb_type)
+{
+	xhci_dbg(xhci, "Vendor specific event TRB type = %u\n", trb_type);
+	if (trb_type == TRB_NEC_CMD_COMP && (xhci->quirks & XHCI_NEC_HOST))
+		handle_cmd_completion(xhci, &event->event_cmd);
+}
+
+static void handle_device_notification(struct xhci_hcd *xhci,
+		union xhci_trb *event)
+{
+	u32 slot_id;
+	struct usb_device *udev;
+
+	slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->generic.field[3]));
+	if (!xhci->devs[slot_id]) {
+		xhci_warn(xhci, "Device Notification event for "
+				"unused slot %u\n", slot_id);
+		return;
+	}
+
+	xhci_dbg(xhci, "Device Wake Notification event for slot ID %u\n",
+			slot_id);
+	udev = xhci->devs[slot_id]->udev;
+	if (udev && udev->parent)
+		usb_wakeup_notification(udev->parent, udev->portnum);
+}
+
+/*
+ * Quirk hanlder for errata seen on Cavium ThunderX2 processor XHCI
+ * Controller.
+ * As per ThunderX2errata-129 USB 2 device may come up as USB 1
+ * If a connection to a USB 1 device is followed by another connection
+ * to a USB 2 device.
+ *
+ * Reset the PHY after the USB device is disconnected if device speed
+ * is less than HCD_USB3.
+ * Retry the reset sequence max of 4 times checking the PLL lock status.
+ *
+ */
+static void xhci_cavium_reset_phy_quirk(struct xhci_hcd *xhci)
+{
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	u32 pll_lock_check;
+	u32 retry_count = 4;
+
+	do {
+		/* Assert PHY reset */
+		writel(0x6F, hcd->regs + 0x1048);
+		udelay(10);
+		/* De-assert the PHY reset */
+		writel(0x7F, hcd->regs + 0x1048);
+		udelay(200);
+		pll_lock_check = readl(hcd->regs + 0x1070);
+	} while (!(pll_lock_check & 0x1) && --retry_count);
+}
+
+static void handle_port_status(struct xhci_hcd *xhci,
+		union xhci_trb *event)
+{
+	struct usb_hcd *hcd;
+	u32 port_id;
+	u32 portsc, cmd_reg;
+	int max_ports;
+	int slot_id;
+	unsigned int hcd_portnum;
+	struct xhci_bus_state *bus_state;
+	bool bogus_port_status = false;
+	struct xhci_port *port;
+
+	/* Port status change events always have a successful completion code */
+	if (GET_COMP_CODE(le32_to_cpu(event->generic.field[2])) != COMP_SUCCESS)
+		xhci_warn(xhci,
+			  "WARN: xHC returned failed port status event\n");
+
+	port_id = GET_PORT_ID(le32_to_cpu(event->generic.field[0]));
+	max_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+
+	if ((port_id <= 0) || (port_id > max_ports)) {
+		xhci_warn(xhci, "Port change event with invalid port ID %d\n",
+			  port_id);
+		inc_deq(xhci, xhci->event_ring);
+		return;
+	}
+
+	port = &xhci->hw_ports[port_id - 1];
+	if (!port || !port->rhub || port->hcd_portnum == DUPLICATE_ENTRY) {
+		xhci_warn(xhci, "Port change event, no port for port ID %u\n",
+			  port_id);
+		bogus_port_status = true;
+		goto cleanup;
+	}
+
+	/* We might get interrupts after shared_hcd is removed */
+	if (port->rhub == &xhci->usb3_rhub && xhci->shared_hcd == NULL) {
+		xhci_dbg(xhci, "ignore port event for removed USB3 hcd\n");
+		bogus_port_status = true;
+		goto cleanup;
+	}
+
+	hcd = port->rhub->hcd;
+	bus_state = &port->rhub->bus_state;
+	hcd_portnum = port->hcd_portnum;
+	portsc = readl(port->addr);
+
+	xhci_dbg(xhci, "Port change event, %d-%d, id %d, portsc: 0x%x\n",
+		 hcd->self.busnum, hcd_portnum + 1, port_id, portsc);
+
+	trace_xhci_handle_port_status(hcd_portnum, portsc);
+
+	if (hcd->state == HC_STATE_SUSPENDED) {
+		xhci_dbg(xhci, "resume root hub\n");
+		usb_hcd_resume_root_hub(hcd);
+	}
+
+	if (hcd->speed >= HCD_USB3 &&
+	    (portsc & PORT_PLS_MASK) == XDEV_INACTIVE) {
+		slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1);
+		if (slot_id && xhci->devs[slot_id])
+			xhci->devs[slot_id]->flags |= VDEV_PORT_ERROR;
+	}
+
+	if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_RESUME) {
+		xhci_dbg(xhci, "port resume event for port %d\n", port_id);
+
+		cmd_reg = readl(&xhci->op_regs->command);
+		if (!(cmd_reg & CMD_RUN)) {
+			xhci_warn(xhci, "xHC is not running.\n");
+			goto cleanup;
+		}
+
+		if (DEV_SUPERSPEED_ANY(portsc)) {
+			xhci_dbg(xhci, "remote wake SS port %d\n", port_id);
+			/* Set a flag to say the port signaled remote wakeup,
+			 * so we can tell the difference between the end of
+			 * device and host initiated resume.
+			 */
+			bus_state->port_remote_wakeup |= 1 << hcd_portnum;
+			xhci_test_and_clear_bit(xhci, port, PORT_PLC);
+			usb_hcd_start_port_resume(&hcd->self, hcd_portnum);
+			xhci_set_link_state(xhci, port, XDEV_U0);
+			/* Need to wait until the next link state change
+			 * indicates the device is actually in U0.
+			 */
+			bogus_port_status = true;
+			goto cleanup;
+		} else if (!test_bit(hcd_portnum, &bus_state->resuming_ports)) {
+			xhci_dbg(xhci, "resume HS port %d\n", port_id);
+			bus_state->resume_done[hcd_portnum] = jiffies +
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
+			set_bit(hcd_portnum, &bus_state->resuming_ports);
+			/* Do the rest in GetPortStatus after resume time delay.
+			 * Avoid polling roothub status before that so that a
+			 * usb device auto-resume latency around ~40ms.
+			 */
+			set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+			mod_timer(&hcd->rh_timer,
+				  bus_state->resume_done[hcd_portnum]);
+			usb_hcd_start_port_resume(&hcd->self, hcd_portnum);
+			bogus_port_status = true;
+		}
+	}
+
+	if ((portsc & PORT_PLC) &&
+	    DEV_SUPERSPEED_ANY(portsc) &&
+	    ((portsc & PORT_PLS_MASK) == XDEV_U0 ||
+	     (portsc & PORT_PLS_MASK) == XDEV_U1 ||
+	     (portsc & PORT_PLS_MASK) == XDEV_U2)) {
+		xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
+		complete(&bus_state->u3exit_done[hcd_portnum]);
+		/* We've just brought the device into U0/1/2 through either the
+		 * Resume state after a device remote wakeup, or through the
+		 * U3Exit state after a host-initiated resume.  If it's a device
+		 * initiated remote wake, don't pass up the link state change,
+		 * so the roothub behavior is consistent with external
+		 * USB 3.0 hub behavior.
+		 */
+		slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1);
+		if (slot_id && xhci->devs[slot_id])
+			xhci_ring_device(xhci, slot_id);
+		if (bus_state->port_remote_wakeup & (1 << hcd_portnum)) {
+			xhci_test_and_clear_bit(xhci, port, PORT_PLC);
+			usb_wakeup_notification(hcd->self.root_hub,
+					hcd_portnum + 1);
+			bogus_port_status = true;
+			goto cleanup;
+		}
+	}
+
+	/*
+	 * Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
+	 * RExit to a disconnect state).  If so, let the driver know it's
+	 * out of the RExit state.
+	 */
+	if (!DEV_SUPERSPEED_ANY(portsc) && hcd->speed < HCD_USB3 &&
+			test_and_clear_bit(hcd_portnum,
+				&bus_state->rexit_ports)) {
+		complete(&bus_state->rexit_done[hcd_portnum]);
+		bogus_port_status = true;
+		goto cleanup;
+	}
+
+	if (hcd->speed < HCD_USB3) {
+		xhci_test_and_clear_bit(xhci, port, PORT_PLC);
+		if ((xhci->quirks & XHCI_RESET_PLL_ON_DISCONNECT) &&
+		    (portsc & PORT_CSC) && !(portsc & PORT_CONNECT))
+			xhci_cavium_reset_phy_quirk(xhci);
+	}
+
+cleanup:
+	/* Update event ring dequeue pointer before dropping the lock */
+	inc_deq(xhci, xhci->event_ring);
+
+	/* Don't make the USB core poll the roothub if we got a bad port status
+	 * change event.  Besides, at that point we can't tell which roothub
+	 * (USB 2.0 or USB 3.0) to kick.
+	 */
+	if (bogus_port_status)
+		return;
+
+	/*
+	 * xHCI port-status-change events occur when the "or" of all the
+	 * status-change bits in the portsc register changes from 0 to 1.
+	 * New status changes won't cause an event if any other change
+	 * bits are still set.  When an event occurs, switch over to
+	 * polling to avoid losing status changes.
+	 */
+	xhci_dbg(xhci, "%s: starting usb%d port polling.\n",
+		 __func__, hcd->self.busnum);
+	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	spin_unlock(&xhci->lock);
+	/* Pass this up to the core */
+	usb_hcd_poll_rh_status(hcd);
+	spin_lock(&xhci->lock);
+}
+
+/*
+ * This TD is defined by the TRBs starting at start_trb in start_seg and ending
+ * at end_trb, which may be in another segment.  If the suspect DMA address is a
+ * TRB in this TD, this function returns that TRB's segment.  Otherwise it
+ * returns 0.
+ */
+struct xhci_segment *trb_in_td(struct xhci_hcd *xhci,
+		struct xhci_segment *start_seg,
+		union xhci_trb	*start_trb,
+		union xhci_trb	*end_trb,
+		dma_addr_t	suspect_dma,
+		bool		debug)
+{
+	dma_addr_t start_dma;
+	dma_addr_t end_seg_dma;
+	dma_addr_t end_trb_dma;
+	struct xhci_segment *cur_seg;
+
+	start_dma = xhci_trb_virt_to_dma(start_seg, start_trb);
+	cur_seg = start_seg;
+
+	do {
+		if (start_dma == 0)
+			return NULL;
+		/* We may get an event for a Link TRB in the middle of a TD */
+		end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
+				&cur_seg->trbs[TRBS_PER_SEGMENT - 1]);
+		/* If the end TRB isn't in this segment, this is set to 0 */
+		end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb);
+
+		if (debug)
+			xhci_warn(xhci,
+				"Looking for event-dma %016llx trb-start %016llx trb-end %016llx seg-start %016llx seg-end %016llx\n",
+				(unsigned long long)suspect_dma,
+				(unsigned long long)start_dma,
+				(unsigned long long)end_trb_dma,
+				(unsigned long long)cur_seg->dma,
+				(unsigned long long)end_seg_dma);
+
+		if (end_trb_dma > 0) {
+			/* The end TRB is in this segment, so suspect should be here */
+			if (start_dma <= end_trb_dma) {
+				if (suspect_dma >= start_dma && suspect_dma <= end_trb_dma)
+					return cur_seg;
+			} else {
+				/* Case for one segment with
+				 * a TD wrapped around to the top
+				 */
+				if ((suspect_dma >= start_dma &&
+							suspect_dma <= end_seg_dma) ||
+						(suspect_dma >= cur_seg->dma &&
+						 suspect_dma <= end_trb_dma))
+					return cur_seg;
+			}
+			return NULL;
+		} else {
+			/* Might still be somewhere in this segment */
+			if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
+				return cur_seg;
+		}
+		cur_seg = cur_seg->next;
+		start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
+	} while (cur_seg != start_seg);
+
+	return NULL;
+}
+
+static void xhci_clear_hub_tt_buffer(struct xhci_hcd *xhci, struct xhci_td *td,
+		struct xhci_virt_ep *ep)
+{
+	/*
+	 * As part of low/full-speed endpoint-halt processing
+	 * we must clear the TT buffer (USB 2.0 specification 11.17.5).
+	 */
+	if (td->urb->dev->tt && !usb_pipeint(td->urb->pipe) &&
+	    (td->urb->dev->tt->hub != xhci_to_hcd(xhci)->self.root_hub) &&
+	    !(ep->ep_state & EP_CLEARING_TT)) {
+		ep->ep_state |= EP_CLEARING_TT;
+		td->urb->ep->hcpriv = td->urb->dev;
+		if (usb_hub_clear_tt_buffer(td->urb))
+			ep->ep_state &= ~EP_CLEARING_TT;
+	}
+}
+
+/* Check if an error has halted the endpoint ring.  The class driver will
+ * cleanup the halt for a non-default control endpoint if we indicate a stall.
+ * However, a babble and other errors also halt the endpoint ring, and the class
+ * driver won't clear the halt in that case, so we need to issue a Set Transfer
+ * Ring Dequeue Pointer command manually.
+ */
+static int xhci_requires_manual_halt_cleanup(struct xhci_hcd *xhci,
+		struct xhci_ep_ctx *ep_ctx,
+		unsigned int trb_comp_code)
+{
+	/* TRB completion codes that may require a manual halt cleanup */
+	if (trb_comp_code == COMP_USB_TRANSACTION_ERROR ||
+			trb_comp_code == COMP_BABBLE_DETECTED_ERROR ||
+			trb_comp_code == COMP_SPLIT_TRANSACTION_ERROR)
+		/* The 0.95 spec says a babbling control endpoint
+		 * is not halted. The 0.96 spec says it is.  Some HW
+		 * claims to be 0.95 compliant, but it halts the control
+		 * endpoint anyway.  Check if a babble halted the
+		 * endpoint.
+		 */
+		if (GET_EP_CTX_STATE(ep_ctx) == EP_STATE_HALTED)
+			return 1;
+
+	return 0;
+}
+
+int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code)
+{
+	if (trb_comp_code >= 224 && trb_comp_code <= 255) {
+		/* Vendor defined "informational" completion code,
+		 * treat as not-an-error.
+		 */
+		xhci_dbg(xhci, "Vendor defined info completion code %u\n",
+				trb_comp_code);
+		xhci_dbg(xhci, "Treating code as success.\n");
+		return 1;
+	}
+	return 0;
+}
+
+static int finish_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
+		     struct xhci_ring *ep_ring, struct xhci_td *td,
+		     u32 trb_comp_code)
+{
+	struct xhci_ep_ctx *ep_ctx;
+	int trbs_freed;
+
+	ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep->ep_index);
+
+	switch (trb_comp_code) {
+	case COMP_STOPPED_LENGTH_INVALID:
+	case COMP_STOPPED_SHORT_PACKET:
+	case COMP_STOPPED:
+		/*
+		 * The "Stop Endpoint" completion will take care of any
+		 * stopped TDs. A stopped TD may be restarted, so don't update
+		 * the ring dequeue pointer or take this TD off any lists yet.
+		 */
+		return 0;
+	case COMP_USB_TRANSACTION_ERROR:
+	case COMP_BABBLE_DETECTED_ERROR:
+	case COMP_SPLIT_TRANSACTION_ERROR:
+		/*
+		 * If endpoint context state is not halted we might be
+		 * racing with a reset endpoint command issued by a unsuccessful
+		 * stop endpoint completion (context error). In that case the
+		 * td should be on the cancelled list, and EP_HALTED flag set.
+		 *
+		 * Or then it's not halted due to the 0.95 spec stating that a
+		 * babbling control endpoint should not halt. The 0.96 spec
+		 * again says it should.  Some HW claims to be 0.95 compliant,
+		 * but it halts the control endpoint anyway.
+		 */
+		if (GET_EP_CTX_STATE(ep_ctx) != EP_STATE_HALTED) {
+			/*
+			 * If EP_HALTED is set and TD is on the cancelled list
+			 * the TD and dequeue pointer will be handled by reset
+			 * ep command completion
+			 */
+			if ((ep->ep_state & EP_HALTED) &&
+			    !list_empty(&td->cancelled_td_list)) {
+				xhci_dbg(xhci, "Already resolving halted ep for 0x%llx\n",
+					 (unsigned long long)xhci_trb_virt_to_dma(
+						 td->start_seg, td->first_trb));
+				return 0;
+			}
+			/* endpoint not halted, don't reset it */
+			break;
+		}
+		/* Almost same procedure as for STALL_ERROR below */
+		xhci_clear_hub_tt_buffer(xhci, td, ep);
+		xhci_handle_halted_endpoint(xhci, ep, ep_ring->stream_id, td,
+					    EP_HARD_RESET);
+		return 0;
+	case COMP_STALL_ERROR:
+		/*
+		 * xhci internal endpoint state will go to a "halt" state for
+		 * any stall, including default control pipe protocol stall.
+		 * To clear the host side halt we need to issue a reset endpoint
+		 * command, followed by a set dequeue command to move past the
+		 * TD.
+		 * Class drivers clear the device side halt from a functional
+		 * stall later. Hub TT buffer should only be cleared for FS/LS
+		 * devices behind HS hubs for functional stalls.
+		 */
+		if (ep->ep_index != 0)
+			xhci_clear_hub_tt_buffer(xhci, td, ep);
+
+		xhci_handle_halted_endpoint(xhci, ep, ep_ring->stream_id, td,
+					    EP_HARD_RESET);
+
+		return 0; /* xhci_handle_halted_endpoint marked td cancelled */
+	default:
+		break;
+	}
+
+	/* Update ring dequeue pointer */
+	trbs_freed = xhci_num_trbs_to(ep_ring->deq_seg, ep_ring->dequeue,
+				      td->last_trb_seg, td->last_trb,
+				      ep_ring->num_segs);
+	if (trbs_freed < 0)
+		xhci_dbg(xhci, "Failed to count freed trbs at TD finish\n");
+	else
+		ep_ring->num_trbs_free += trbs_freed;
+	ep_ring->dequeue = td->last_trb;
+	ep_ring->deq_seg = td->last_trb_seg;
+	inc_deq(xhci, ep_ring);
+
+	return xhci_td_cleanup(xhci, td, ep_ring, td->status);
+}
+
+/* sum trb lengths from ring dequeue up to stop_trb, _excluding_ stop_trb */
+static int sum_trb_lengths(struct xhci_hcd *xhci, struct xhci_ring *ring,
+			   union xhci_trb *stop_trb)
+{
+	u32 sum;
+	union xhci_trb *trb = ring->dequeue;
+	struct xhci_segment *seg = ring->deq_seg;
+
+	for (sum = 0; trb != stop_trb; next_trb(xhci, ring, &seg, &trb)) {
+		if (!trb_is_noop(trb) && !trb_is_link(trb))
+			sum += TRB_LEN(le32_to_cpu(trb->generic.field[2]));
+	}
+	return sum;
+}
+
+/*
+ * Process control tds, update urb status and actual_length.
+ */
+static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
+		struct xhci_ring *ep_ring,  struct xhci_td *td,
+			   union xhci_trb *ep_trb, struct xhci_transfer_event *event)
+{
+	struct xhci_ep_ctx *ep_ctx;
+	u32 trb_comp_code;
+	u32 remaining, requested;
+	u32 trb_type;
+
+	trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(ep_trb->generic.field[3]));
+	ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep->ep_index);
+	trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
+	requested = td->urb->transfer_buffer_length;
+	remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
+
+	switch (trb_comp_code) {
+	case COMP_SUCCESS:
+		if (trb_type != TRB_STATUS) {
+			xhci_warn(xhci, "WARN: Success on ctrl %s TRB without IOC set?\n",
+				  (trb_type == TRB_DATA) ? "data" : "setup");
+			td->status = -ESHUTDOWN;
+			break;
+		}
+		td->status = 0;
+		break;
+	case COMP_SHORT_PACKET:
+		td->status = 0;
+		break;
+	case COMP_STOPPED_SHORT_PACKET:
+		if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
+			td->urb->actual_length = remaining;
+		else
+			xhci_warn(xhci, "WARN: Stopped Short Packet on ctrl setup or status TRB\n");
+		goto finish_td;
+	case COMP_STOPPED:
+		switch (trb_type) {
+		case TRB_SETUP:
+			td->urb->actual_length = 0;
+			goto finish_td;
+		case TRB_DATA:
+		case TRB_NORMAL:
+			td->urb->actual_length = requested - remaining;
+			goto finish_td;
+		case TRB_STATUS:
+			td->urb->actual_length = requested;
+			goto finish_td;
+		default:
+			xhci_warn(xhci, "WARN: unexpected TRB Type %d\n",
+				  trb_type);
+			goto finish_td;
+		}
+	case COMP_STOPPED_LENGTH_INVALID:
+		goto finish_td;
+	default:
+		if (!xhci_requires_manual_halt_cleanup(xhci,
+						       ep_ctx, trb_comp_code))
+			break;
+		xhci_dbg(xhci, "TRB error %u, halted endpoint index = %u\n",
+			 trb_comp_code, ep->ep_index);
+		fallthrough;
+	case COMP_STALL_ERROR:
+		/* Did we transfer part of the data (middle) phase? */
+		if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
+			td->urb->actual_length = requested - remaining;
+		else if (!td->urb_length_set)
+			td->urb->actual_length = 0;
+		goto finish_td;
+	}
+
+	/* stopped at setup stage, no data transferred */
+	if (trb_type == TRB_SETUP)
+		goto finish_td;
+
+	/*
+	 * if on data stage then update the actual_length of the URB and flag it
+	 * as set, so it won't be overwritten in the event for the last TRB.
+	 */
+	if (trb_type == TRB_DATA ||
+		trb_type == TRB_NORMAL) {
+		td->urb_length_set = true;
+		td->urb->actual_length = requested - remaining;
+		xhci_dbg(xhci, "Waiting for status stage event\n");
+		return 0;
+	}
+
+	/* at status stage */
+	if (!td->urb_length_set)
+		td->urb->actual_length = requested;
+
+finish_td:
+	return finish_td(xhci, ep, ep_ring, td, trb_comp_code);
+}
+
+/*
+ * Process isochronous tds, update urb packet status and actual_length.
+ */
+static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
+		struct xhci_ring *ep_ring, struct xhci_td *td,
+		union xhci_trb *ep_trb, struct xhci_transfer_event *event)
+{
+	struct urb_priv *urb_priv;
+	int idx;
+	struct usb_iso_packet_descriptor *frame;
+	u32 trb_comp_code;
+	bool sum_trbs_for_length = false;
+	u32 remaining, requested, ep_trb_len;
+	int short_framestatus;
+
+	trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
+	urb_priv = td->urb->hcpriv;
+	idx = urb_priv->num_tds_done;
+	frame = &td->urb->iso_frame_desc[idx];
+	requested = frame->length;
+	remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
+	ep_trb_len = TRB_LEN(le32_to_cpu(ep_trb->generic.field[2]));
+	short_framestatus = td->urb->transfer_flags & URB_SHORT_NOT_OK ?
+		-EREMOTEIO : 0;
+
+	/* handle completion code */
+	switch (trb_comp_code) {
+	case COMP_SUCCESS:
+		if (remaining) {
+			frame->status = short_framestatus;
+			if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
+				sum_trbs_for_length = true;
+			break;
+		}
+		frame->status = 0;
+		break;
+	case COMP_SHORT_PACKET:
+		frame->status = short_framestatus;
+		sum_trbs_for_length = true;
+		break;
+	case COMP_BANDWIDTH_OVERRUN_ERROR:
+		frame->status = -ECOMM;
+		break;
+	case COMP_ISOCH_BUFFER_OVERRUN:
+	case COMP_BABBLE_DETECTED_ERROR:
+		frame->status = -EOVERFLOW;
+		break;
+	case COMP_INCOMPATIBLE_DEVICE_ERROR:
+	case COMP_STALL_ERROR:
+		frame->status = -EPROTO;
+		break;
+	case COMP_USB_TRANSACTION_ERROR:
+		frame->status = -EPROTO;
+		if (ep_trb != td->last_trb)
+			return 0;
+		break;
+	case COMP_STOPPED:
+		sum_trbs_for_length = true;
+		break;
+	case COMP_STOPPED_SHORT_PACKET:
+		/* field normally containing residue now contains tranferred */
+		frame->status = short_framestatus;
+		requested = remaining;
+		break;
+	case COMP_STOPPED_LENGTH_INVALID:
+		requested = 0;
+		remaining = 0;
+		break;
+	default:
+		sum_trbs_for_length = true;
+		frame->status = -1;
+		break;
+	}
+
+	if (sum_trbs_for_length)
+		frame->actual_length = sum_trb_lengths(xhci, ep->ring, ep_trb) +
+			ep_trb_len - remaining;
+	else
+		frame->actual_length = requested;
+
+	td->urb->actual_length += frame->actual_length;
+
+	return finish_td(xhci, ep, ep_ring, td, trb_comp_code);
+}
+
+static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
+			struct xhci_virt_ep *ep, int status)
+{
+	struct urb_priv *urb_priv;
+	struct usb_iso_packet_descriptor *frame;
+	int idx;
+
+	urb_priv = td->urb->hcpriv;
+	idx = urb_priv->num_tds_done;
+	frame = &td->urb->iso_frame_desc[idx];
+
+	/* The transfer is partly done. */
+	frame->status = -EXDEV;
+
+	/* calc actual length */
+	frame->actual_length = 0;
+
+	/* Update ring dequeue pointer */
+	ep->ring->dequeue = td->last_trb;
+	ep->ring->deq_seg = td->last_trb_seg;
+	ep->ring->num_trbs_free += td->num_trbs - 1;
+	inc_deq(xhci, ep->ring);
+
+	return xhci_td_cleanup(xhci, td, ep->ring, status);
+}
+
+/*
+ * Process bulk and interrupt tds, update urb status and actual_length.
+ */
+static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
+		struct xhci_ring *ep_ring, struct xhci_td *td,
+		union xhci_trb *ep_trb, struct xhci_transfer_event *event)
+{
+	struct xhci_slot_ctx *slot_ctx;
+	u32 trb_comp_code;
+	u32 remaining, requested, ep_trb_len;
+
+	slot_ctx = xhci_get_slot_ctx(xhci, ep->vdev->out_ctx);
+	trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
+	remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
+	ep_trb_len = TRB_LEN(le32_to_cpu(ep_trb->generic.field[2]));
+	requested = td->urb->transfer_buffer_length;
+
+	switch (trb_comp_code) {
+	case COMP_SUCCESS:
+		ep->err_count = 0;
+		/* handle success with untransferred data as short packet */
+		if (ep_trb != td->last_trb || remaining) {
+			xhci_warn(xhci, "WARN Successful completion on short TX\n");
+			xhci_dbg(xhci, "ep %#x - asked for %d bytes, %d bytes untransferred\n",
+				 td->urb->ep->desc.bEndpointAddress,
+				 requested, remaining);
+		}
+		td->status = 0;
+		break;
+	case COMP_SHORT_PACKET:
+		xhci_dbg(xhci, "ep %#x - asked for %d bytes, %d bytes untransferred\n",
+			 td->urb->ep->desc.bEndpointAddress,
+			 requested, remaining);
+		td->status = 0;
+		break;
+	case COMP_STOPPED_SHORT_PACKET:
+		td->urb->actual_length = remaining;
+		goto finish_td;
+	case COMP_STOPPED_LENGTH_INVALID:
+		/* stopped on ep trb with invalid length, exclude it */
+		ep_trb_len	= 0;
+		remaining	= 0;
+		break;
+	case COMP_USB_TRANSACTION_ERROR:
+		if (xhci->quirks & XHCI_NO_SOFT_RETRY ||
+		    (ep->err_count++ > MAX_SOFT_RETRY) ||
+		    le32_to_cpu(slot_ctx->tt_info) & TT_SLOT)
+			break;
+
+		td->status = 0;
+
+		xhci_handle_halted_endpoint(xhci, ep, ep_ring->stream_id, td,
+					    EP_SOFT_RESET);
+		return 0;
+	default:
+		/* do nothing */
+		break;
+	}
+
+	if (ep_trb == td->last_trb)
+		td->urb->actual_length = requested - remaining;
+	else
+		td->urb->actual_length =
+			sum_trb_lengths(xhci, ep_ring, ep_trb) +
+			ep_trb_len - remaining;
+finish_td:
+	if (remaining > requested) {
+		xhci_warn(xhci, "bad transfer trb length %d in event trb\n",
+			  remaining);
+		td->urb->actual_length = 0;
+	}
+
+	return finish_td(xhci, ep, ep_ring, td, trb_comp_code);
+}
+
+/*
+ * If this function returns an error condition, it means it got a Transfer
+ * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
+ * At this point, the host controller is probably hosed and should be reset.
+ */
+static int handle_tx_event(struct xhci_hcd *xhci,
+		struct xhci_transfer_event *event)
+{
+	struct xhci_virt_ep *ep;
+	struct xhci_ring *ep_ring;
+	unsigned int slot_id;
+	int ep_index;
+	struct xhci_td *td = NULL;
+	dma_addr_t ep_trb_dma;
+	struct xhci_segment *ep_seg;
+	union xhci_trb *ep_trb;
+	int status = -EINPROGRESS;
+	struct xhci_ep_ctx *ep_ctx;
+	struct list_head *tmp;
+	u32 trb_comp_code;
+	int td_num = 0;
+	bool handling_skipped_tds = false;
+
+	slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
+	ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
+	trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
+	ep_trb_dma = le64_to_cpu(event->buffer);
+
+	ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+	if (!ep) {
+		xhci_err(xhci, "ERROR Invalid Transfer event\n");
+		goto err_out;
+	}
+
+	ep_ring = xhci_dma_to_transfer_ring(ep, ep_trb_dma);
+	ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep_index);
+
+	if (GET_EP_CTX_STATE(ep_ctx) == EP_STATE_DISABLED) {
+		xhci_err(xhci,
+			 "ERROR Transfer event for disabled endpoint slot %u ep %u\n",
+			  slot_id, ep_index);
+		goto err_out;
+	}
+
+	/* Some transfer events don't always point to a trb, see xhci 4.17.4 */
+	if (!ep_ring) {
+		switch (trb_comp_code) {
+		case COMP_STALL_ERROR:
+		case COMP_USB_TRANSACTION_ERROR:
+		case COMP_INVALID_STREAM_TYPE_ERROR:
+		case COMP_INVALID_STREAM_ID_ERROR:
+			xhci_dbg(xhci, "Stream transaction error ep %u no id\n",
+				 ep_index);
+			if (ep->err_count++ > MAX_SOFT_RETRY)
+				xhci_handle_halted_endpoint(xhci, ep, 0, NULL,
+							    EP_HARD_RESET);
+			else
+				xhci_handle_halted_endpoint(xhci, ep, 0, NULL,
+							    EP_SOFT_RESET);
+			goto cleanup;
+		case COMP_RING_UNDERRUN:
+		case COMP_RING_OVERRUN:
+		case COMP_STOPPED_LENGTH_INVALID:
+			goto cleanup;
+		default:
+			xhci_err(xhci, "ERROR Transfer event for unknown stream ring slot %u ep %u\n",
+				 slot_id, ep_index);
+			goto err_out;
+		}
+	}
+
+	/* Count current td numbers if ep->skip is set */
+	if (ep->skip) {
+		list_for_each(tmp, &ep_ring->td_list)
+			td_num++;
+	}
+
+	/* Look for common error cases */
+	switch (trb_comp_code) {
+	/* Skip codes that require special handling depending on
+	 * transfer type
+	 */
+	case COMP_SUCCESS:
+		if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
+			break;
+		if (xhci->quirks & XHCI_TRUST_TX_LENGTH ||
+		    ep_ring->last_td_was_short)
+			trb_comp_code = COMP_SHORT_PACKET;
+		else
+			xhci_warn_ratelimited(xhci,
+					      "WARN Successful completion on short TX for slot %u ep %u: needs XHCI_TRUST_TX_LENGTH quirk?\n",
+					      slot_id, ep_index);
+		break;
+	case COMP_SHORT_PACKET:
+		break;
+	/* Completion codes for endpoint stopped state */
+	case COMP_STOPPED:
+		xhci_dbg(xhci, "Stopped on Transfer TRB for slot %u ep %u\n",
+			 slot_id, ep_index);
+		break;
+	case COMP_STOPPED_LENGTH_INVALID:
+		xhci_dbg(xhci,
+			 "Stopped on No-op or Link TRB for slot %u ep %u\n",
+			 slot_id, ep_index);
+		break;
+	case COMP_STOPPED_SHORT_PACKET:
+		xhci_dbg(xhci,
+			 "Stopped with short packet transfer detected for slot %u ep %u\n",
+			 slot_id, ep_index);
+		break;
+	/* Completion codes for endpoint halted state */
+	case COMP_STALL_ERROR:
+		xhci_dbg(xhci, "Stalled endpoint for slot %u ep %u\n", slot_id,
+			 ep_index);
+		status = -EPIPE;
+		break;
+	case COMP_SPLIT_TRANSACTION_ERROR:
+		xhci_dbg(xhci, "Split transaction error for slot %u ep %u\n",
+			 slot_id, ep_index);
+		status = -EPROTO;
+		break;
+	case COMP_USB_TRANSACTION_ERROR:
+		xhci_dbg(xhci, "Transfer error for slot %u ep %u on endpoint\n",
+			 slot_id, ep_index);
+		status = -EPROTO;
+		break;
+	case COMP_BABBLE_DETECTED_ERROR:
+		xhci_dbg(xhci, "Babble error for slot %u ep %u on endpoint\n",
+			 slot_id, ep_index);
+		status = -EOVERFLOW;
+		break;
+	/* Completion codes for endpoint error state */
+	case COMP_TRB_ERROR:
+		xhci_warn(xhci,
+			  "WARN: TRB error for slot %u ep %u on endpoint\n",
+			  slot_id, ep_index);
+		status = -EILSEQ;
+		break;
+	/* completion codes not indicating endpoint state change */
+	case COMP_DATA_BUFFER_ERROR:
+		xhci_warn(xhci,
+			  "WARN: HC couldn't access mem fast enough for slot %u ep %u\n",
+			  slot_id, ep_index);
+		status = -ENOSR;
+		break;
+	case COMP_BANDWIDTH_OVERRUN_ERROR:
+		xhci_warn(xhci,
+			  "WARN: bandwidth overrun event for slot %u ep %u on endpoint\n",
+			  slot_id, ep_index);
+		break;
+	case COMP_ISOCH_BUFFER_OVERRUN:
+		xhci_warn(xhci,
+			  "WARN: buffer overrun event for slot %u ep %u on endpoint",
+			  slot_id, ep_index);
+		break;
+	case COMP_RING_UNDERRUN:
+		/*
+		 * When the Isoch ring is empty, the xHC will generate
+		 * a Ring Overrun Event for IN Isoch endpoint or Ring
+		 * Underrun Event for OUT Isoch endpoint.
+		 */
+		xhci_dbg(xhci, "underrun event on endpoint\n");
+		if (!list_empty(&ep_ring->td_list))
+			xhci_dbg(xhci, "Underrun Event for slot %d ep %d "
+					"still with TDs queued?\n",
+				 TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
+				 ep_index);
+		goto cleanup;
+	case COMP_RING_OVERRUN:
+		xhci_dbg(xhci, "overrun event on endpoint\n");
+		if (!list_empty(&ep_ring->td_list))
+			xhci_dbg(xhci, "Overrun Event for slot %d ep %d "
+					"still with TDs queued?\n",
+				 TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
+				 ep_index);
+		goto cleanup;
+	case COMP_MISSED_SERVICE_ERROR:
+		/*
+		 * When encounter missed service error, one or more isoc tds
+		 * may be missed by xHC.
+		 * Set skip flag of the ep_ring; Complete the missed tds as
+		 * short transfer when process the ep_ring next time.
+		 */
+		ep->skip = true;
+		xhci_dbg(xhci,
+			 "Miss service interval error for slot %u ep %u, set skip flag\n",
+			 slot_id, ep_index);
+		goto cleanup;
+	case COMP_NO_PING_RESPONSE_ERROR:
+		ep->skip = true;
+		xhci_dbg(xhci,
+			 "No Ping response error for slot %u ep %u, Skip one Isoc TD\n",
+			 slot_id, ep_index);
+		goto cleanup;
+
+	case COMP_INCOMPATIBLE_DEVICE_ERROR:
+		/* needs disable slot command to recover */
+		xhci_warn(xhci,
+			  "WARN: detect an incompatible device for slot %u ep %u",
+			  slot_id, ep_index);
+		status = -EPROTO;
+		break;
+	default:
+		if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
+			status = 0;
+			break;
+		}
+		xhci_warn(xhci,
+			  "ERROR Unknown event condition %u for slot %u ep %u , HC probably busted\n",
+			  trb_comp_code, slot_id, ep_index);
+		goto cleanup;
+	}
+
+	do {
+		/* This TRB should be in the TD at the head of this ring's
+		 * TD list.
+		 */
+		if (list_empty(&ep_ring->td_list)) {
+			/*
+			 * Don't print wanings if it's due to a stopped endpoint
+			 * generating an extra completion event if the device
+			 * was suspended. Or, a event for the last TRB of a
+			 * short TD we already got a short event for.
+			 * The short TD is already removed from the TD list.
+			 */
+
+			if (!(trb_comp_code == COMP_STOPPED ||
+			      trb_comp_code == COMP_STOPPED_LENGTH_INVALID ||
+			      ep_ring->last_td_was_short)) {
+				xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
+						TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
+						ep_index);
+			}
+			if (ep->skip) {
+				ep->skip = false;
+				xhci_dbg(xhci, "td_list is empty while skip flag set. Clear skip flag for slot %u ep %u.\n",
+					 slot_id, ep_index);
+			}
+			if (trb_comp_code == COMP_STALL_ERROR ||
+			    xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
+							      trb_comp_code)) {
+				xhci_handle_halted_endpoint(xhci, ep,
+							    ep_ring->stream_id,
+							    NULL,
+							    EP_HARD_RESET);
+			}
+			goto cleanup;
+		}
+
+		/* We've skipped all the TDs on the ep ring when ep->skip set */
+		if (ep->skip && td_num == 0) {
+			ep->skip = false;
+			xhci_dbg(xhci, "All tds on the ep_ring skipped. Clear skip flag for slot %u ep %u.\n",
+				 slot_id, ep_index);
+			goto cleanup;
+		}
+
+		td = list_first_entry(&ep_ring->td_list, struct xhci_td,
+				      td_list);
+		if (ep->skip)
+			td_num--;
+
+		/* Is this a TRB in the currently executing TD? */
+		ep_seg = trb_in_td(xhci, ep_ring->deq_seg, ep_ring->dequeue,
+				td->last_trb, ep_trb_dma, false);
+
+		/*
+		 * Skip the Force Stopped Event. The event_trb(event_dma) of FSE
+		 * is not in the current TD pointed by ep_ring->dequeue because
+		 * that the hardware dequeue pointer still at the previous TRB
+		 * of the current TD. The previous TRB maybe a Link TD or the
+		 * last TRB of the previous TD. The command completion handle
+		 * will take care the rest.
+		 */
+		if (!ep_seg && (trb_comp_code == COMP_STOPPED ||
+			   trb_comp_code == COMP_STOPPED_LENGTH_INVALID)) {
+			goto cleanup;
+		}
+
+		if (!ep_seg) {
+			if (!ep->skip ||
+			    !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) {
+				/* Some host controllers give a spurious
+				 * successful event after a short transfer.
+				 * Ignore it.
+				 */
+				if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) &&
+						ep_ring->last_td_was_short) {
+					ep_ring->last_td_was_short = false;
+					goto cleanup;
+				}
+				/* HC is busted, give up! */
+				xhci_err(xhci,
+					"ERROR Transfer event TRB DMA ptr not "
+					"part of current TD ep_index %d "
+					"comp_code %u\n", ep_index,
+					trb_comp_code);
+				trb_in_td(xhci, ep_ring->deq_seg,
+					  ep_ring->dequeue, td->last_trb,
+					  ep_trb_dma, true);
+				return -ESHUTDOWN;
+			}
+
+			skip_isoc_td(xhci, td, ep, status);
+			goto cleanup;
+		}
+		if (trb_comp_code == COMP_SHORT_PACKET)
+			ep_ring->last_td_was_short = true;
+		else
+			ep_ring->last_td_was_short = false;
+
+		if (ep->skip) {
+			xhci_dbg(xhci,
+				 "Found td. Clear skip flag for slot %u ep %u.\n",
+				 slot_id, ep_index);
+			ep->skip = false;
+		}
+
+		ep_trb = &ep_seg->trbs[(ep_trb_dma - ep_seg->dma) /
+						sizeof(*ep_trb)];
+
+		trace_xhci_handle_transfer(ep_ring,
+				(struct xhci_generic_trb *) ep_trb);
+
+		/*
+		 * No-op TRB could trigger interrupts in a case where
+		 * a URB was killed and a STALL_ERROR happens right
+		 * after the endpoint ring stopped. Reset the halted
+		 * endpoint. Otherwise, the endpoint remains stalled
+		 * indefinitely.
+		 */
+
+		if (trb_is_noop(ep_trb)) {
+			if (trb_comp_code == COMP_STALL_ERROR ||
+			    xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
+							      trb_comp_code))
+				xhci_handle_halted_endpoint(xhci, ep,
+							    ep_ring->stream_id,
+							    td, EP_HARD_RESET);
+			goto cleanup;
+		}
+
+		td->status = status;
+
+		/* update the urb's actual_length and give back to the core */
+		if (usb_endpoint_xfer_control(&td->urb->ep->desc))
+			process_ctrl_td(xhci, ep, ep_ring, td, ep_trb, event);
+		else if (usb_endpoint_xfer_isoc(&td->urb->ep->desc))
+			process_isoc_td(xhci, ep, ep_ring, td, ep_trb, event);
+		else
+			process_bulk_intr_td(xhci, ep, ep_ring, td, ep_trb, event);
+cleanup:
+		handling_skipped_tds = ep->skip &&
+			trb_comp_code != COMP_MISSED_SERVICE_ERROR &&
+			trb_comp_code != COMP_NO_PING_RESPONSE_ERROR;
+
+		/*
+		 * Do not update event ring dequeue pointer if we're in a loop
+		 * processing missed tds.
+		 */
+		if (!handling_skipped_tds)
+			inc_deq(xhci, xhci->event_ring);
+
+	/*
+	 * If ep->skip is set, it means there are missed tds on the
+	 * endpoint ring need to take care of.
+	 * Process them as short transfer until reach the td pointed by
+	 * the event.
+	 */
+	} while (handling_skipped_tds);
+
+	return 0;
+
+err_out:
+	xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n",
+		 (unsigned long long) xhci_trb_virt_to_dma(
+			 xhci->event_ring->deq_seg,
+			 xhci->event_ring->dequeue),
+		 lower_32_bits(le64_to_cpu(event->buffer)),
+		 upper_32_bits(le64_to_cpu(event->buffer)),
+		 le32_to_cpu(event->transfer_len),
+		 le32_to_cpu(event->flags));
+	return -ENODEV;
+}
+
+/*
+ * This function handles all OS-owned events on the event ring.  It may drop
+ * xhci->lock between event processing (e.g. to pass up port status changes).
+ * Returns >0 for "possibly more events to process" (caller should call again),
+ * otherwise 0 if done.  In future, <0 returns should indicate error code.
+ */
+static int xhci_handle_event(struct xhci_hcd *xhci)
+{
+	union xhci_trb *event;
+	int update_ptrs = 1;
+	u32 trb_type;
+	int ret;
+
+	/* Event ring hasn't been allocated yet. */
+	if (!xhci->event_ring || !xhci->event_ring->dequeue) {
+		xhci_err(xhci, "ERROR event ring not ready\n");
+		return -ENOMEM;
+	}
+
+	event = xhci->event_ring->dequeue;
+	/* Does the HC or OS own the TRB? */
+	if ((le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE) !=
+	    xhci->event_ring->cycle_state)
+		return 0;
+
+	trace_xhci_handle_event(xhci->event_ring, &event->generic);
+
+	/*
+	 * Barrier between reading the TRB_CYCLE (valid) flag above and any
+	 * speculative reads of the event's flags/data below.
+	 */
+	rmb();
+	trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(event->event_cmd.flags));
+	/* FIXME: Handle more event types. */
+
+	switch (trb_type) {
+	case TRB_COMPLETION:
+		handle_cmd_completion(xhci, &event->event_cmd);
+		break;
+	case TRB_PORT_STATUS:
+		handle_port_status(xhci, event);
+		update_ptrs = 0;
+		break;
+	case TRB_TRANSFER:
+		ret = handle_tx_event(xhci, &event->trans_event);
+		if (ret >= 0)
+			update_ptrs = 0;
+		break;
+	case TRB_DEV_NOTE:
+		handle_device_notification(xhci, event);
+		break;
+	default:
+		if (trb_type >= TRB_VENDOR_DEFINED_LOW)
+			handle_vendor_event(xhci, event, trb_type);
+		else
+			xhci_warn(xhci, "ERROR unknown event type %d\n", trb_type);
+	}
+	/* Any of the above functions may drop and re-acquire the lock, so check
+	 * to make sure a watchdog timer didn't mark the host as non-responsive.
+	 */
+	if (xhci->xhc_state & XHCI_STATE_DYING) {
+		xhci_dbg(xhci, "xHCI host dying, returning from "
+				"event handler.\n");
+		return 0;
+	}
+
+	if (update_ptrs)
+		/* Update SW event ring dequeue pointer */
+		inc_deq(xhci, xhci->event_ring);
+
+	/* Are there more items on the event ring?  Caller will call us again to
+	 * check.
+	 */
+	return 1;
+}
+
+/*
+ * Update Event Ring Dequeue Pointer:
+ * - When all events have finished
+ * - To avoid "Event Ring Full Error" condition
+ */
+static void xhci_update_erst_dequeue(struct xhci_hcd *xhci,
+		union xhci_trb *event_ring_deq)
+{
+	u64 temp_64;
+	dma_addr_t deq;
+
+	temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	/* If necessary, update the HW's version of the event ring deq ptr. */
+	if (event_ring_deq != xhci->event_ring->dequeue) {
+		deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
+				xhci->event_ring->dequeue);
+		if (deq == 0)
+			xhci_warn(xhci, "WARN something wrong with SW event ring dequeue ptr\n");
+		/*
+		 * Per 4.9.4, Software writes to the ERDP register shall
+		 * always advance the Event Ring Dequeue Pointer value.
+		 */
+		if ((temp_64 & (u64) ~ERST_PTR_MASK) ==
+				((u64) deq & (u64) ~ERST_PTR_MASK))
+			return;
+
+		/* Update HC event ring dequeue pointer */
+		temp_64 &= ERST_PTR_MASK;
+		temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK);
+	}
+
+	/* Clear the event handler busy flag (RW1C) */
+	temp_64 |= ERST_EHB;
+	xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue);
+}
+
+/*
+ * xHCI spec says we can get an interrupt, and if the HC has an error condition,
+ * we might get bad data out of the event ring.  Section 4.10.2.7 has a list of
+ * indicators of an event TRB error, but we check the status *first* to be safe.
+ */
+irqreturn_t xhci_irq(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	union xhci_trb *event_ring_deq;
+	irqreturn_t ret = IRQ_NONE;
+	u64 temp_64;
+	u32 status;
+	int event_loop = 0;
+
+	spin_lock(&xhci->lock);
+	/* Check if the xHC generated the interrupt, or the irq is shared */
+	status = readl(&xhci->op_regs->status);
+	if (status == ~(u32)0) {
+		xhci_hc_died(xhci);
+		ret = IRQ_HANDLED;
+		goto out;
+	}
+
+	if (!(status & STS_EINT))
+		goto out;
+
+	if (status & STS_FATAL) {
+		xhci_warn(xhci, "WARNING: Host System Error\n");
+		xhci_halt(xhci);
+		ret = IRQ_HANDLED;
+		goto out;
+	}
+
+	/*
+	 * Clear the op reg interrupt status first,
+	 * so we can receive interrupts from other MSI-X interrupters.
+	 * Write 1 to clear the interrupt status.
+	 */
+	status |= STS_EINT;
+	writel(status, &xhci->op_regs->status);
+
+	if (!hcd->msi_enabled) {
+		u32 irq_pending;
+		irq_pending = readl(&xhci->ir_set->irq_pending);
+		irq_pending |= IMAN_IP;
+		writel(irq_pending, &xhci->ir_set->irq_pending);
+	}
+
+	if (xhci->xhc_state & XHCI_STATE_DYING ||
+	    xhci->xhc_state & XHCI_STATE_HALTED) {
+		xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
+				"Shouldn't IRQs be disabled?\n");
+		/* Clear the event handler busy flag (RW1C);
+		 * the event ring should be empty.
+		 */
+		temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+		xhci_write_64(xhci, temp_64 | ERST_EHB,
+				&xhci->ir_set->erst_dequeue);
+		ret = IRQ_HANDLED;
+		goto out;
+	}
+
+	event_ring_deq = xhci->event_ring->dequeue;
+	/* FIXME this should be a delayed service routine
+	 * that clears the EHB.
+	 */
+	while (xhci_handle_event(xhci) > 0) {
+		if (event_loop++ < TRBS_PER_SEGMENT / 2)
+			continue;
+		xhci_update_erst_dequeue(xhci, event_ring_deq);
+		event_ring_deq = xhci->event_ring->dequeue;
+
+		/* ring is half-full, force isoc trbs to interrupt more often */
+		if (xhci->isoc_bei_interval > AVOID_BEI_INTERVAL_MIN)
+			xhci->isoc_bei_interval = xhci->isoc_bei_interval / 2;
+
+		event_loop = 0;
+	}
+
+	xhci_update_erst_dequeue(xhci, event_ring_deq);
+	ret = IRQ_HANDLED;
+
+out:
+	spin_unlock(&xhci->lock);
+
+	return ret;
+}
+
+irqreturn_t xhci_msi_irq(int irq, void *hcd)
+{
+	return xhci_irq(hcd);
+}
+
+/****		Endpoint Ring Operations	****/
+
+/*
+ * Generic function for queueing a TRB on a ring.
+ * The caller must have checked to make sure there's room on the ring.
+ *
+ * @more_trbs_coming:	Will you enqueue more TRBs before calling
+ *			prepare_transfer()?
+ */
+static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
+		bool more_trbs_coming,
+		u32 field1, u32 field2, u32 field3, u32 field4)
+{
+	struct xhci_generic_trb *trb;
+
+	trb = &ring->enqueue->generic;
+	trb->field[0] = cpu_to_le32(field1);
+	trb->field[1] = cpu_to_le32(field2);
+	trb->field[2] = cpu_to_le32(field3);
+	/* make sure TRB is fully written before giving it to the controller */
+	wmb();
+	trb->field[3] = cpu_to_le32(field4);
+
+	trace_xhci_queue_trb(ring, trb);
+
+	inc_enq(xhci, ring, more_trbs_coming);
+}
+
+/*
+ * Does various checks on the endpoint ring, and makes it ready to queue num_trbs.
+ * FIXME allocate segments if the ring is full.
+ */
+static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+		u32 ep_state, unsigned int num_trbs, gfp_t mem_flags)
+{
+	unsigned int num_trbs_needed;
+	unsigned int link_trb_count = 0;
+
+	/* Make sure the endpoint has been added to xHC schedule */
+	switch (ep_state) {
+	case EP_STATE_DISABLED:
+		/*
+		 * USB core changed config/interfaces without notifying us,
+		 * or hardware is reporting the wrong state.
+		 */
+		xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
+		return -ENOENT;
+	case EP_STATE_ERROR:
+		xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n");
+		/* FIXME event handling code for error needs to clear it */
+		/* XXX not sure if this should be -ENOENT or not */
+		return -EINVAL;
+	case EP_STATE_HALTED:
+		xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n");
+		break;
+	case EP_STATE_STOPPED:
+	case EP_STATE_RUNNING:
+		break;
+	default:
+		xhci_err(xhci, "ERROR unknown endpoint state for ep\n");
+		/*
+		 * FIXME issue Configure Endpoint command to try to get the HC
+		 * back into a known state.
+		 */
+		return -EINVAL;
+	}
+
+	while (1) {
+		if (room_on_ring(xhci, ep_ring, num_trbs))
+			break;
+
+		if (ep_ring == xhci->cmd_ring) {
+			xhci_err(xhci, "Do not support expand command ring\n");
+			return -ENOMEM;
+		}
+
+		xhci_dbg_trace(xhci, trace_xhci_dbg_ring_expansion,
+				"ERROR no room on ep ring, try ring expansion");
+		num_trbs_needed = num_trbs - ep_ring->num_trbs_free;
+		if (xhci_ring_expansion(xhci, ep_ring, num_trbs_needed,
+					mem_flags)) {
+			xhci_err(xhci, "Ring expansion failed\n");
+			return -ENOMEM;
+		}
+	}
+
+	while (trb_is_link(ep_ring->enqueue)) {
+		/* If we're not dealing with 0.95 hardware or isoc rings
+		 * on AMD 0.96 host, clear the chain bit.
+		 */
+		if (!xhci_link_trb_quirk(xhci) &&
+		    !(ep_ring->type == TYPE_ISOC &&
+		      (xhci->quirks & XHCI_AMD_0x96_HOST)))
+			ep_ring->enqueue->link.control &=
+				cpu_to_le32(~TRB_CHAIN);
+		else
+			ep_ring->enqueue->link.control |=
+				cpu_to_le32(TRB_CHAIN);
+
+		wmb();
+		ep_ring->enqueue->link.control ^= cpu_to_le32(TRB_CYCLE);
+
+		/* Toggle the cycle bit after the last ring segment. */
+		if (link_trb_toggles_cycle(ep_ring->enqueue))
+			ep_ring->cycle_state ^= 1;
+
+		ep_ring->enq_seg = ep_ring->enq_seg->next;
+		ep_ring->enqueue = ep_ring->enq_seg->trbs;
+
+		/* prevent infinite loop if all first trbs are link trbs */
+		if (link_trb_count++ > ep_ring->num_segs) {
+			xhci_warn(xhci, "Ring is an endless link TRB loop\n");
+			return -EINVAL;
+		}
+	}
+
+	if (last_trb_on_seg(ep_ring->enq_seg, ep_ring->enqueue)) {
+		xhci_warn(xhci, "Missing link TRB at end of ring segment\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int prepare_transfer(struct xhci_hcd *xhci,
+		struct xhci_virt_device *xdev,
+		unsigned int ep_index,
+		unsigned int stream_id,
+		unsigned int num_trbs,
+		struct urb *urb,
+		unsigned int td_index,
+		gfp_t mem_flags)
+{
+	int ret;
+	struct urb_priv *urb_priv;
+	struct xhci_td	*td;
+	struct xhci_ring *ep_ring;
+	struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+
+	ep_ring = xhci_triad_to_transfer_ring(xhci, xdev->slot_id, ep_index,
+					      stream_id);
+	if (!ep_ring) {
+		xhci_dbg(xhci, "Can't prepare ring for bad stream ID %u\n",
+				stream_id);
+		return -EINVAL;
+	}
+
+	ret = prepare_ring(xhci, ep_ring, GET_EP_CTX_STATE(ep_ctx),
+			   num_trbs, mem_flags);
+	if (ret)
+		return ret;
+
+	urb_priv = urb->hcpriv;
+	td = &urb_priv->td[td_index];
+
+	INIT_LIST_HEAD(&td->td_list);
+	INIT_LIST_HEAD(&td->cancelled_td_list);
+
+	if (td_index == 0) {
+		ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb);
+		if (unlikely(ret))
+			return ret;
+	}
+
+	td->urb = urb;
+	/* Add this TD to the tail of the endpoint ring's TD list */
+	list_add_tail(&td->td_list, &ep_ring->td_list);
+	td->start_seg = ep_ring->enq_seg;
+	td->first_trb = ep_ring->enqueue;
+
+	return 0;
+}
+
+unsigned int count_trbs(u64 addr, u64 len)
+{
+	unsigned int num_trbs;
+
+	num_trbs = DIV_ROUND_UP(len + (addr & (TRB_MAX_BUFF_SIZE - 1)),
+			TRB_MAX_BUFF_SIZE);
+	if (num_trbs == 0)
+		num_trbs++;
+
+	return num_trbs;
+}
+
+static inline unsigned int count_trbs_needed(struct urb *urb)
+{
+	return count_trbs(urb->transfer_dma, urb->transfer_buffer_length);
+}
+
+static unsigned int count_sg_trbs_needed(struct urb *urb)
+{
+	struct scatterlist *sg;
+	unsigned int i, len, full_len, num_trbs = 0;
+
+	full_len = urb->transfer_buffer_length;
+
+	for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) {
+		len = sg_dma_len(sg);
+		num_trbs += count_trbs(sg_dma_address(sg), len);
+		len = min_t(unsigned int, len, full_len);
+		full_len -= len;
+		if (full_len == 0)
+			break;
+	}
+
+	return num_trbs;
+}
+
+static unsigned int count_isoc_trbs_needed(struct urb *urb, int i)
+{
+	u64 addr, len;
+
+	addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
+	len = urb->iso_frame_desc[i].length;
+
+	return count_trbs(addr, len);
+}
+
+static void check_trb_math(struct urb *urb, int running_total)
+{
+	if (unlikely(running_total != urb->transfer_buffer_length))
+		dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
+				"queued %#x (%d), asked for %#x (%d)\n",
+				__func__,
+				urb->ep->desc.bEndpointAddress,
+				running_total, running_total,
+				urb->transfer_buffer_length,
+				urb->transfer_buffer_length);
+}
+
+static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
+		unsigned int ep_index, unsigned int stream_id, int start_cycle,
+		struct xhci_generic_trb *start_trb)
+{
+	/*
+	 * Pass all the TRBs to the hardware at once and make sure this write
+	 * isn't reordered.
+	 */
+	wmb();
+	if (start_cycle)
+		start_trb->field[3] |= cpu_to_le32(start_cycle);
+	else
+		start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
+	xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
+}
+
+static void check_interval(struct xhci_hcd *xhci, struct urb *urb,
+						struct xhci_ep_ctx *ep_ctx)
+{
+	int xhci_interval;
+	int ep_interval;
+
+	xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx->ep_info));
+	ep_interval = urb->interval;
+
+	/* Convert to microframes */
+	if (urb->dev->speed == USB_SPEED_LOW ||
+			urb->dev->speed == USB_SPEED_FULL)
+		ep_interval *= 8;
+
+	/* FIXME change this to a warning and a suggestion to use the new API
+	 * to set the polling interval (once the API is added).
+	 */
+	if (xhci_interval != ep_interval) {
+		dev_dbg_ratelimited(&urb->dev->dev,
+				"Driver uses different interval (%d microframe%s) than xHCI (%d microframe%s)\n",
+				ep_interval, ep_interval == 1 ? "" : "s",
+				xhci_interval, xhci_interval == 1 ? "" : "s");
+		urb->interval = xhci_interval;
+		/* Convert back to frames for LS/FS devices */
+		if (urb->dev->speed == USB_SPEED_LOW ||
+				urb->dev->speed == USB_SPEED_FULL)
+			urb->interval /= 8;
+	}
+}
+
+/*
+ * xHCI uses normal TRBs for both bulk and interrupt.  When the interrupt
+ * endpoint is to be serviced, the xHC will consume (at most) one TD.  A TD
+ * (comprised of sg list entries) can take several service intervals to
+ * transmit.
+ */
+int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+		struct urb *urb, int slot_id, unsigned int ep_index)
+{
+	struct xhci_ep_ctx *ep_ctx;
+
+	ep_ctx = xhci_get_ep_ctx(xhci, xhci->devs[slot_id]->out_ctx, ep_index);
+	check_interval(xhci, urb, ep_ctx);
+
+	return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index);
+}
+
+/*
+ * For xHCI 1.0 host controllers, TD size is the number of max packet sized
+ * packets remaining in the TD (*not* including this TRB).
+ *
+ * Total TD packet count = total_packet_count =
+ *     DIV_ROUND_UP(TD size in bytes / wMaxPacketSize)
+ *
+ * Packets transferred up to and including this TRB = packets_transferred =
+ *     rounddown(total bytes transferred including this TRB / wMaxPacketSize)
+ *
+ * TD size = total_packet_count - packets_transferred
+ *
+ * For xHCI 0.96 and older, TD size field should be the remaining bytes
+ * including this TRB, right shifted by 10
+ *
+ * For all hosts it must fit in bits 21:17, so it can't be bigger than 31.
+ * This is taken care of in the TRB_TD_SIZE() macro
+ *
+ * The last TRB in a TD must have the TD size set to zero.
+ */
+static u32 xhci_td_remainder(struct xhci_hcd *xhci, int transferred,
+			      int trb_buff_len, unsigned int td_total_len,
+			      struct urb *urb, bool more_trbs_coming)
+{
+	u32 maxp, total_packet_count;
+
+	/* MTK xHCI 0.96 contains some features from 1.0 */
+	if (xhci->hci_version < 0x100 && !(xhci->quirks & XHCI_MTK_HOST))
+		return ((td_total_len - transferred) >> 10);
+
+	/* One TRB with a zero-length data packet. */
+	if (!more_trbs_coming || (transferred == 0 && trb_buff_len == 0) ||
+	    trb_buff_len == td_total_len)
+		return 0;
+
+	/* for MTK xHCI 0.96, TD size include this TRB, but not in 1.x */
+	if ((xhci->quirks & XHCI_MTK_HOST) && (xhci->hci_version < 0x100))
+		trb_buff_len = 0;
+
+	maxp = usb_endpoint_maxp(&urb->ep->desc);
+	total_packet_count = DIV_ROUND_UP(td_total_len, maxp);
+
+	/* Queueing functions don't count the current TRB into transferred */
+	return (total_packet_count - ((transferred + trb_buff_len) / maxp));
+}
+
+
+static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len,
+			 u32 *trb_buff_len, struct xhci_segment *seg)
+{
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+	unsigned int unalign;
+	unsigned int max_pkt;
+	u32 new_buff_len;
+	size_t len;
+
+	max_pkt = usb_endpoint_maxp(&urb->ep->desc);
+	unalign = (enqd_len + *trb_buff_len) % max_pkt;
+
+	/* we got lucky, last normal TRB data on segment is packet aligned */
+	if (unalign == 0)
+		return 0;
+
+	xhci_dbg(xhci, "Unaligned %d bytes, buff len %d\n",
+		 unalign, *trb_buff_len);
+
+	/* is the last nornal TRB alignable by splitting it */
+	if (*trb_buff_len > unalign) {
+		*trb_buff_len -= unalign;
+		xhci_dbg(xhci, "split align, new buff len %d\n", *trb_buff_len);
+		return 0;
+	}
+
+	/*
+	 * We want enqd_len + trb_buff_len to sum up to a number aligned to
+	 * number which is divisible by the endpoint's wMaxPacketSize. IOW:
+	 * (size of currently enqueued TRBs + remainder) % wMaxPacketSize == 0.
+	 */
+	new_buff_len = max_pkt - (enqd_len % max_pkt);
+
+	if (new_buff_len > (urb->transfer_buffer_length - enqd_len))
+		new_buff_len = (urb->transfer_buffer_length - enqd_len);
+
+	/* create a max max_pkt sized bounce buffer pointed to by last trb */
+	if (usb_urb_dir_out(urb)) {
+		if (urb->num_sgs) {
+			len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs,
+						 seg->bounce_buf, new_buff_len, enqd_len);
+			if (len != new_buff_len)
+				xhci_warn(xhci, "WARN Wrong bounce buffer write length: %zu != %d\n",
+					  len, new_buff_len);
+		} else {
+			memcpy(seg->bounce_buf, urb->transfer_buffer + enqd_len, new_buff_len);
+		}
+
+		seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
+						 max_pkt, DMA_TO_DEVICE);
+	} else {
+		seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
+						 max_pkt, DMA_FROM_DEVICE);
+	}
+
+	if (dma_mapping_error(dev, seg->bounce_dma)) {
+		/* try without aligning. Some host controllers survive */
+		xhci_warn(xhci, "Failed mapping bounce buffer, not aligning\n");
+		return 0;
+	}
+	*trb_buff_len = new_buff_len;
+	seg->bounce_len = new_buff_len;
+	seg->bounce_offs = enqd_len;
+
+	xhci_dbg(xhci, "Bounce align, new buff len %d\n", *trb_buff_len);
+
+	return 1;
+}
+
+/* This is very similar to what ehci-q.c qtd_fill() does */
+int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+		struct urb *urb, int slot_id, unsigned int ep_index)
+{
+	struct xhci_ring *ring;
+	struct urb_priv *urb_priv;
+	struct xhci_td *td;
+	struct xhci_generic_trb *start_trb;
+	struct scatterlist *sg = NULL;
+	bool more_trbs_coming = true;
+	bool need_zero_pkt = false;
+	bool first_trb = true;
+	unsigned int num_trbs;
+	unsigned int start_cycle, num_sgs = 0;
+	unsigned int enqd_len, block_len, trb_buff_len, full_len;
+	int sent_len, ret;
+	u32 field, length_field, remainder;
+	u64 addr, send_addr;
+
+	ring = xhci_urb_to_transfer_ring(xhci, urb);
+	if (!ring)
+		return -EINVAL;
+
+	full_len = urb->transfer_buffer_length;
+	/* If we have scatter/gather list, we use it. */
+	if (urb->num_sgs && !(urb->transfer_flags & URB_DMA_MAP_SINGLE)) {
+		num_sgs = urb->num_mapped_sgs;
+		sg = urb->sg;
+		addr = (u64) sg_dma_address(sg);
+		block_len = sg_dma_len(sg);
+		num_trbs = count_sg_trbs_needed(urb);
+	} else {
+		num_trbs = count_trbs_needed(urb);
+		addr = (u64) urb->transfer_dma;
+		block_len = full_len;
+	}
+	ret = prepare_transfer(xhci, xhci->devs[slot_id],
+			ep_index, urb->stream_id,
+			num_trbs, urb, 0, mem_flags);
+	if (unlikely(ret < 0))
+		return ret;
+
+	urb_priv = urb->hcpriv;
+
+	/* Deal with URB_ZERO_PACKET - need one more td/trb */
+	if (urb->transfer_flags & URB_ZERO_PACKET && urb_priv->num_tds > 1)
+		need_zero_pkt = true;
+
+	td = &urb_priv->td[0];
+
+	/*
+	 * Don't give the first TRB to the hardware (by toggling the cycle bit)
+	 * until we've finished creating all the other TRBs.  The ring's cycle
+	 * state may change as we enqueue the other TRBs, so save it too.
+	 */
+	start_trb = &ring->enqueue->generic;
+	start_cycle = ring->cycle_state;
+	send_addr = addr;
+
+	/* Queue the TRBs, even if they are zero-length */
+	for (enqd_len = 0; first_trb || enqd_len < full_len;
+			enqd_len += trb_buff_len) {
+		field = TRB_TYPE(TRB_NORMAL);
+
+		/* TRB buffer should not cross 64KB boundaries */
+		trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
+		trb_buff_len = min_t(unsigned int, trb_buff_len, block_len);
+
+		if (enqd_len + trb_buff_len > full_len)
+			trb_buff_len = full_len - enqd_len;
+
+		/* Don't change the cycle bit of the first TRB until later */
+		if (first_trb) {
+			first_trb = false;
+			if (start_cycle == 0)
+				field |= TRB_CYCLE;
+		} else
+			field |= ring->cycle_state;
+
+		/* Chain all the TRBs together; clear the chain bit in the last
+		 * TRB to indicate it's the last TRB in the chain.
+		 */
+		if (enqd_len + trb_buff_len < full_len) {
+			field |= TRB_CHAIN;
+			if (trb_is_link(ring->enqueue + 1)) {
+				if (xhci_align_td(xhci, urb, enqd_len,
+						  &trb_buff_len,
+						  ring->enq_seg)) {
+					send_addr = ring->enq_seg->bounce_dma;
+					/* assuming TD won't span 2 segs */
+					td->bounce_seg = ring->enq_seg;
+				}
+			}
+		}
+		if (enqd_len + trb_buff_len >= full_len) {
+			field &= ~TRB_CHAIN;
+			field |= TRB_IOC;
+			more_trbs_coming = false;
+			td->last_trb = ring->enqueue;
+			td->last_trb_seg = ring->enq_seg;
+			if (xhci_urb_suitable_for_idt(urb)) {
+				memcpy(&send_addr, urb->transfer_buffer,
+				       trb_buff_len);
+				le64_to_cpus(&send_addr);
+				field |= TRB_IDT;
+			}
+		}
+
+		/* Only set interrupt on short packet for IN endpoints */
+		if (usb_urb_dir_in(urb))
+			field |= TRB_ISP;
+
+		/* Set the TRB length, TD size, and interrupter fields. */
+		remainder = xhci_td_remainder(xhci, enqd_len, trb_buff_len,
+					      full_len, urb, more_trbs_coming);
+
+		length_field = TRB_LEN(trb_buff_len) |
+			TRB_TD_SIZE(remainder) |
+			TRB_INTR_TARGET(0);
+
+		queue_trb(xhci, ring, more_trbs_coming | need_zero_pkt,
+				lower_32_bits(send_addr),
+				upper_32_bits(send_addr),
+				length_field,
+				field);
+		td->num_trbs++;
+		addr += trb_buff_len;
+		sent_len = trb_buff_len;
+
+		while (sg && sent_len >= block_len) {
+			/* New sg entry */
+			--num_sgs;
+			sent_len -= block_len;
+			sg = sg_next(sg);
+			if (num_sgs != 0 && sg) {
+				block_len = sg_dma_len(sg);
+				addr = (u64) sg_dma_address(sg);
+				addr += sent_len;
+			}
+		}
+		block_len -= sent_len;
+		send_addr = addr;
+	}
+
+	if (need_zero_pkt) {
+		ret = prepare_transfer(xhci, xhci->devs[slot_id],
+				       ep_index, urb->stream_id,
+				       1, urb, 1, mem_flags);
+		urb_priv->td[1].last_trb = ring->enqueue;
+		urb_priv->td[1].last_trb_seg = ring->enq_seg;
+		field = TRB_TYPE(TRB_NORMAL) | ring->cycle_state | TRB_IOC;
+		queue_trb(xhci, ring, 0, 0, 0, TRB_INTR_TARGET(0), field);
+		urb_priv->td[1].num_trbs++;
+	}
+
+	check_trb_math(urb, enqd_len);
+	giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
+			start_cycle, start_trb);
+	return 0;
+}
+
+/* Caller must have locked xhci->lock */
+int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+		struct urb *urb, int slot_id, unsigned int ep_index)
+{
+	struct xhci_ring *ep_ring;
+	int num_trbs;
+	int ret;
+	struct usb_ctrlrequest *setup;
+	struct xhci_generic_trb *start_trb;
+	int start_cycle;
+	u32 field;
+	struct urb_priv *urb_priv;
+	struct xhci_td *td;
+
+	ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
+	if (!ep_ring)
+		return -EINVAL;
+
+	/*
+	 * Need to copy setup packet into setup TRB, so we can't use the setup
+	 * DMA address.
+	 */
+	if (!urb->setup_packet)
+		return -EINVAL;
+
+	/* 1 TRB for setup, 1 for status */
+	num_trbs = 2;
+	/*
+	 * Don't need to check if we need additional event data and normal TRBs,
+	 * since data in control transfers will never get bigger than 16MB
+	 * XXX: can we get a buffer that crosses 64KB boundaries?
+	 */
+	if (urb->transfer_buffer_length > 0)
+		num_trbs++;
+	ret = prepare_transfer(xhci, xhci->devs[slot_id],
+			ep_index, urb->stream_id,
+			num_trbs, urb, 0, mem_flags);
+	if (ret < 0)
+		return ret;
+
+	urb_priv = urb->hcpriv;
+	td = &urb_priv->td[0];
+	td->num_trbs = num_trbs;
+
+	/*
+	 * Don't give the first TRB to the hardware (by toggling the cycle bit)
+	 * until we've finished creating all the other TRBs.  The ring's cycle
+	 * state may change as we enqueue the other TRBs, so save it too.
+	 */
+	start_trb = &ep_ring->enqueue->generic;
+	start_cycle = ep_ring->cycle_state;
+
+	/* Queue setup TRB - see section 6.4.1.2.1 */
+	/* FIXME better way to translate setup_packet into two u32 fields? */
+	setup = (struct usb_ctrlrequest *) urb->setup_packet;
+	field = 0;
+	field |= TRB_IDT | TRB_TYPE(TRB_SETUP);
+	if (start_cycle == 0)
+		field |= 0x1;
+
+	/* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
+	if ((xhci->hci_version >= 0x100) || (xhci->quirks & XHCI_MTK_HOST)) {
+		if (urb->transfer_buffer_length > 0) {
+			if (setup->bRequestType & USB_DIR_IN)
+				field |= TRB_TX_TYPE(TRB_DATA_IN);
+			else
+				field |= TRB_TX_TYPE(TRB_DATA_OUT);
+		}
+	}
+
+	queue_trb(xhci, ep_ring, true,
+		  setup->bRequestType | setup->bRequest << 8 | le16_to_cpu(setup->wValue) << 16,
+		  le16_to_cpu(setup->wIndex) | le16_to_cpu(setup->wLength) << 16,
+		  TRB_LEN(8) | TRB_INTR_TARGET(0),
+		  /* Immediate data in pointer */
+		  field);
+
+	/* If there's data, queue data TRBs */
+	/* Only set interrupt on short packet for IN endpoints */
+	if (usb_urb_dir_in(urb))
+		field = TRB_ISP | TRB_TYPE(TRB_DATA);
+	else
+		field = TRB_TYPE(TRB_DATA);
+
+	if (urb->transfer_buffer_length > 0) {
+		u32 length_field, remainder;
+		u64 addr;
+
+		if (xhci_urb_suitable_for_idt(urb)) {
+			memcpy(&addr, urb->transfer_buffer,
+			       urb->transfer_buffer_length);
+			le64_to_cpus(&addr);
+			field |= TRB_IDT;
+		} else {
+			addr = (u64) urb->transfer_dma;
+		}
+
+		remainder = xhci_td_remainder(xhci, 0,
+				urb->transfer_buffer_length,
+				urb->transfer_buffer_length,
+				urb, 1);
+		length_field = TRB_LEN(urb->transfer_buffer_length) |
+				TRB_TD_SIZE(remainder) |
+				TRB_INTR_TARGET(0);
+		if (setup->bRequestType & USB_DIR_IN)
+			field |= TRB_DIR_IN;
+		queue_trb(xhci, ep_ring, true,
+				lower_32_bits(addr),
+				upper_32_bits(addr),
+				length_field,
+				field | ep_ring->cycle_state);
+	}
+
+	/* Save the DMA address of the last TRB in the TD */
+	td->last_trb = ep_ring->enqueue;
+	td->last_trb_seg = ep_ring->enq_seg;
+
+	/* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */
+	/* If the device sent data, the status stage is an OUT transfer */
+	if (urb->transfer_buffer_length > 0 && setup->bRequestType & USB_DIR_IN)
+		field = 0;
+	else
+		field = TRB_DIR_IN;
+	queue_trb(xhci, ep_ring, false,
+			0,
+			0,
+			TRB_INTR_TARGET(0),
+			/* Event on completion */
+			field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
+
+	giveback_first_trb(xhci, slot_id, ep_index, 0,
+			start_cycle, start_trb);
+	return 0;
+}
+
+/*
+ * The transfer burst count field of the isochronous TRB defines the number of
+ * bursts that are required to move all packets in this TD.  Only SuperSpeed
+ * devices can burst up to bMaxBurst number of packets per service interval.
+ * This field is zero based, meaning a value of zero in the field means one
+ * burst.  Basically, for everything but SuperSpeed devices, this field will be
+ * zero.  Only xHCI 1.0 host controllers support this field.
+ */
+static unsigned int xhci_get_burst_count(struct xhci_hcd *xhci,
+		struct urb *urb, unsigned int total_packet_count)
+{
+	unsigned int max_burst;
+
+	if (xhci->hci_version < 0x100 || urb->dev->speed < USB_SPEED_SUPER)
+		return 0;
+
+	max_burst = urb->ep->ss_ep_comp.bMaxBurst;
+	return DIV_ROUND_UP(total_packet_count, max_burst + 1) - 1;
+}
+
+/*
+ * Returns the number of packets in the last "burst" of packets.  This field is
+ * valid for all speeds of devices.  USB 2.0 devices can only do one "burst", so
+ * the last burst packet count is equal to the total number of packets in the
+ * TD.  SuperSpeed endpoints can have up to 3 bursts.  All but the last burst
+ * must contain (bMaxBurst + 1) number of packets, but the last burst can
+ * contain 1 to (bMaxBurst + 1) packets.
+ */
+static unsigned int xhci_get_last_burst_packet_count(struct xhci_hcd *xhci,
+		struct urb *urb, unsigned int total_packet_count)
+{
+	unsigned int max_burst;
+	unsigned int residue;
+
+	if (xhci->hci_version < 0x100)
+		return 0;
+
+	if (urb->dev->speed >= USB_SPEED_SUPER) {
+		/* bMaxBurst is zero based: 0 means 1 packet per burst */
+		max_burst = urb->ep->ss_ep_comp.bMaxBurst;
+		residue = total_packet_count % (max_burst + 1);
+		/* If residue is zero, the last burst contains (max_burst + 1)
+		 * number of packets, but the TLBPC field is zero-based.
+		 */
+		if (residue == 0)
+			return max_burst;
+		return residue - 1;
+	}
+	if (total_packet_count == 0)
+		return 0;
+	return total_packet_count - 1;
+}
+
+/*
+ * Calculates Frame ID field of the isochronous TRB identifies the
+ * target frame that the Interval associated with this Isochronous
+ * Transfer Descriptor will start on. Refer to 4.11.2.5 in 1.1 spec.
+ *
+ * Returns actual frame id on success, negative value on error.
+ */
+static int xhci_get_isoc_frame_id(struct xhci_hcd *xhci,
+		struct urb *urb, int index)
+{
+	int start_frame, ist, ret = 0;
+	int start_frame_id, end_frame_id, current_frame_id;
+
+	if (urb->dev->speed == USB_SPEED_LOW ||
+			urb->dev->speed == USB_SPEED_FULL)
+		start_frame = urb->start_frame + index * urb->interval;
+	else
+		start_frame = (urb->start_frame + index * urb->interval) >> 3;
+
+	/* Isochronous Scheduling Threshold (IST, bits 0~3 in HCSPARAMS2):
+	 *
+	 * If bit [3] of IST is cleared to '0', software can add a TRB no
+	 * later than IST[2:0] Microframes before that TRB is scheduled to
+	 * be executed.
+	 * If bit [3] of IST is set to '1', software can add a TRB no later
+	 * than IST[2:0] Frames before that TRB is scheduled to be executed.
+	 */
+	ist = HCS_IST(xhci->hcs_params2) & 0x7;
+	if (HCS_IST(xhci->hcs_params2) & (1 << 3))
+		ist <<= 3;
+
+	/* Software shall not schedule an Isoch TD with a Frame ID value that
+	 * is less than the Start Frame ID or greater than the End Frame ID,
+	 * where:
+	 *
+	 * End Frame ID = (Current MFINDEX register value + 895 ms.) MOD 2048
+	 * Start Frame ID = (Current MFINDEX register value + IST + 1) MOD 2048
+	 *
+	 * Both the End Frame ID and Start Frame ID values are calculated
+	 * in microframes. When software determines the valid Frame ID value;
+	 * The End Frame ID value should be rounded down to the nearest Frame
+	 * boundary, and the Start Frame ID value should be rounded up to the
+	 * nearest Frame boundary.
+	 */
+	current_frame_id = readl(&xhci->run_regs->microframe_index);
+	start_frame_id = roundup(current_frame_id + ist + 1, 8);
+	end_frame_id = rounddown(current_frame_id + 895 * 8, 8);
+
+	start_frame &= 0x7ff;
+	start_frame_id = (start_frame_id >> 3) & 0x7ff;
+	end_frame_id = (end_frame_id >> 3) & 0x7ff;
+
+	xhci_dbg(xhci, "%s: index %d, reg 0x%x start_frame_id 0x%x, end_frame_id 0x%x, start_frame 0x%x\n",
+		 __func__, index, readl(&xhci->run_regs->microframe_index),
+		 start_frame_id, end_frame_id, start_frame);
+
+	if (start_frame_id < end_frame_id) {
+		if (start_frame > end_frame_id ||
+				start_frame < start_frame_id)
+			ret = -EINVAL;
+	} else if (start_frame_id > end_frame_id) {
+		if ((start_frame > end_frame_id &&
+				start_frame < start_frame_id))
+			ret = -EINVAL;
+	} else {
+			ret = -EINVAL;
+	}
+
+	if (index == 0) {
+		if (ret == -EINVAL || start_frame == start_frame_id) {
+			start_frame = start_frame_id + 1;
+			if (urb->dev->speed == USB_SPEED_LOW ||
+					urb->dev->speed == USB_SPEED_FULL)
+				urb->start_frame = start_frame;
+			else
+				urb->start_frame = start_frame << 3;
+			ret = 0;
+		}
+	}
+
+	if (ret) {
+		xhci_warn(xhci, "Frame ID %d (reg %d, index %d) beyond range (%d, %d)\n",
+				start_frame, current_frame_id, index,
+				start_frame_id, end_frame_id);
+		xhci_warn(xhci, "Ignore frame ID field, use SIA bit instead\n");
+		return ret;
+	}
+
+	return start_frame;
+}
+
+/* Check if we should generate event interrupt for a TD in an isoc URB */
+static bool trb_block_event_intr(struct xhci_hcd *xhci, int num_tds, int i)
+{
+	if (xhci->hci_version < 0x100)
+		return false;
+	/* always generate an event interrupt for the last TD */
+	if (i == num_tds - 1)
+		return false;
+	/*
+	 * If AVOID_BEI is set the host handles full event rings poorly,
+	 * generate an event at least every 8th TD to clear the event ring
+	 */
+	if (i && xhci->quirks & XHCI_AVOID_BEI)
+		return !!(i % xhci->isoc_bei_interval);
+
+	return true;
+}
+
+/* This is for isoc transfer */
+static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+		struct urb *urb, int slot_id, unsigned int ep_index)
+{
+	struct xhci_ring *ep_ring;
+	struct urb_priv *urb_priv;
+	struct xhci_td *td;
+	int num_tds, trbs_per_td;
+	struct xhci_generic_trb *start_trb;
+	bool first_trb;
+	int start_cycle;
+	u32 field, length_field;
+	int running_total, trb_buff_len, td_len, td_remain_len, ret;
+	u64 start_addr, addr;
+	int i, j;
+	bool more_trbs_coming;
+	struct xhci_virt_ep *xep;
+	int frame_id;
+
+	xep = &xhci->devs[slot_id]->eps[ep_index];
+	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
+
+	num_tds = urb->number_of_packets;
+	if (num_tds < 1) {
+		xhci_dbg(xhci, "Isoc URB with zero packets?\n");
+		return -EINVAL;
+	}
+	start_addr = (u64) urb->transfer_dma;
+	start_trb = &ep_ring->enqueue->generic;
+	start_cycle = ep_ring->cycle_state;
+
+	urb_priv = urb->hcpriv;
+	/* Queue the TRBs for each TD, even if they are zero-length */
+	for (i = 0; i < num_tds; i++) {
+		unsigned int total_pkt_count, max_pkt;
+		unsigned int burst_count, last_burst_pkt_count;
+		u32 sia_frame_id;
+
+		first_trb = true;
+		running_total = 0;
+		addr = start_addr + urb->iso_frame_desc[i].offset;
+		td_len = urb->iso_frame_desc[i].length;
+		td_remain_len = td_len;
+		max_pkt = usb_endpoint_maxp(&urb->ep->desc);
+		total_pkt_count = DIV_ROUND_UP(td_len, max_pkt);
+
+		/* A zero-length transfer still involves at least one packet. */
+		if (total_pkt_count == 0)
+			total_pkt_count++;
+		burst_count = xhci_get_burst_count(xhci, urb, total_pkt_count);
+		last_burst_pkt_count = xhci_get_last_burst_packet_count(xhci,
+							urb, total_pkt_count);
+
+		trbs_per_td = count_isoc_trbs_needed(urb, i);
+
+		ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
+				urb->stream_id, trbs_per_td, urb, i, mem_flags);
+		if (ret < 0) {
+			if (i == 0)
+				return ret;
+			goto cleanup;
+		}
+		td = &urb_priv->td[i];
+		td->num_trbs = trbs_per_td;
+		/* use SIA as default, if frame id is used overwrite it */
+		sia_frame_id = TRB_SIA;
+		if (!(urb->transfer_flags & URB_ISO_ASAP) &&
+		    HCC_CFC(xhci->hcc_params)) {
+			frame_id = xhci_get_isoc_frame_id(xhci, urb, i);
+			if (frame_id >= 0)
+				sia_frame_id = TRB_FRAME_ID(frame_id);
+		}
+		/*
+		 * Set isoc specific data for the first TRB in a TD.
+		 * Prevent HW from getting the TRBs by keeping the cycle state
+		 * inverted in the first TDs isoc TRB.
+		 */
+		field = TRB_TYPE(TRB_ISOC) |
+			TRB_TLBPC(last_burst_pkt_count) |
+			sia_frame_id |
+			(i ? ep_ring->cycle_state : !start_cycle);
+
+		/* xhci 1.1 with ETE uses TD_Size field for TBC, old is Rsvdz */
+		if (!xep->use_extended_tbc)
+			field |= TRB_TBC(burst_count);
+
+		/* fill the rest of the TRB fields, and remaining normal TRBs */
+		for (j = 0; j < trbs_per_td; j++) {
+			u32 remainder = 0;
+
+			/* only first TRB is isoc, overwrite otherwise */
+			if (!first_trb)
+				field = TRB_TYPE(TRB_NORMAL) |
+					ep_ring->cycle_state;
+
+			/* Only set interrupt on short packet for IN EPs */
+			if (usb_urb_dir_in(urb))
+				field |= TRB_ISP;
+
+			/* Set the chain bit for all except the last TRB  */
+			if (j < trbs_per_td - 1) {
+				more_trbs_coming = true;
+				field |= TRB_CHAIN;
+			} else {
+				more_trbs_coming = false;
+				td->last_trb = ep_ring->enqueue;
+				td->last_trb_seg = ep_ring->enq_seg;
+				field |= TRB_IOC;
+				if (trb_block_event_intr(xhci, num_tds, i))
+					field |= TRB_BEI;
+			}
+			/* Calculate TRB length */
+			trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
+			if (trb_buff_len > td_remain_len)
+				trb_buff_len = td_remain_len;
+
+			/* Set the TRB length, TD size, & interrupter fields. */
+			remainder = xhci_td_remainder(xhci, running_total,
+						   trb_buff_len, td_len,
+						   urb, more_trbs_coming);
+
+			length_field = TRB_LEN(trb_buff_len) |
+				TRB_INTR_TARGET(0);
+
+			/* xhci 1.1 with ETE uses TD Size field for TBC */
+			if (first_trb && xep->use_extended_tbc)
+				length_field |= TRB_TD_SIZE_TBC(burst_count);
+			else
+				length_field |= TRB_TD_SIZE(remainder);
+			first_trb = false;
+
+			queue_trb(xhci, ep_ring, more_trbs_coming,
+				lower_32_bits(addr),
+				upper_32_bits(addr),
+				length_field,
+				field);
+			running_total += trb_buff_len;
+
+			addr += trb_buff_len;
+			td_remain_len -= trb_buff_len;
+		}
+
+		/* Check TD length */
+		if (running_total != td_len) {
+			xhci_err(xhci, "ISOC TD length unmatch\n");
+			ret = -EINVAL;
+			goto cleanup;
+		}
+	}
+
+	/* store the next frame id */
+	if (HCC_CFC(xhci->hcc_params))
+		xep->next_frame_id = urb->start_frame + num_tds * urb->interval;
+
+	if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
+		if (xhci->quirks & XHCI_AMD_PLL_FIX)
+			usb_amd_quirk_pll_disable();
+	}
+	xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs++;
+
+	giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
+			start_cycle, start_trb);
+	return 0;
+cleanup:
+	/* Clean up a partially enqueued isoc transfer. */
+
+	for (i--; i >= 0; i--)
+		list_del_init(&urb_priv->td[i].td_list);
+
+	/* Use the first TD as a temporary variable to turn the TDs we've queued
+	 * into No-ops with a software-owned cycle bit. That way the hardware
+	 * won't accidentally start executing bogus TDs when we partially
+	 * overwrite them.  td->first_trb and td->start_seg are already set.
+	 */
+	urb_priv->td[0].last_trb = ep_ring->enqueue;
+	/* Every TRB except the first & last will have its cycle bit flipped. */
+	td_to_noop(xhci, ep_ring, &urb_priv->td[0], true);
+
+	/* Reset the ring enqueue back to the first TRB and its cycle bit. */
+	ep_ring->enqueue = urb_priv->td[0].first_trb;
+	ep_ring->enq_seg = urb_priv->td[0].start_seg;
+	ep_ring->cycle_state = start_cycle;
+	ep_ring->num_trbs_free = ep_ring->num_trbs_free_temp;
+	usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
+	return ret;
+}
+
+/*
+ * Check transfer ring to guarantee there is enough room for the urb.
+ * Update ISO URB start_frame and interval.
+ * Update interval as xhci_queue_intr_tx does. Use xhci frame_index to
+ * update urb->start_frame if URB_ISO_ASAP is set in transfer_flags or
+ * Contiguous Frame ID is not supported by HC.
+ */
+int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
+		struct urb *urb, int slot_id, unsigned int ep_index)
+{
+	struct xhci_virt_device *xdev;
+	struct xhci_ring *ep_ring;
+	struct xhci_ep_ctx *ep_ctx;
+	int start_frame;
+	int num_tds, num_trbs, i;
+	int ret;
+	struct xhci_virt_ep *xep;
+	int ist;
+
+	xdev = xhci->devs[slot_id];
+	xep = &xhci->devs[slot_id]->eps[ep_index];
+	ep_ring = xdev->eps[ep_index].ring;
+	ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+
+	num_trbs = 0;
+	num_tds = urb->number_of_packets;
+	for (i = 0; i < num_tds; i++)
+		num_trbs += count_isoc_trbs_needed(urb, i);
+
+	/* Check the ring to guarantee there is enough room for the whole urb.
+	 * Do not insert any td of the urb to the ring if the check failed.
+	 */
+	ret = prepare_ring(xhci, ep_ring, GET_EP_CTX_STATE(ep_ctx),
+			   num_trbs, mem_flags);
+	if (ret)
+		return ret;
+
+	/*
+	 * Check interval value. This should be done before we start to
+	 * calculate the start frame value.
+	 */
+	check_interval(xhci, urb, ep_ctx);
+
+	/* Calculate the start frame and put it in urb->start_frame. */
+	if (HCC_CFC(xhci->hcc_params) && !list_empty(&ep_ring->td_list)) {
+		if (GET_EP_CTX_STATE(ep_ctx) ==	EP_STATE_RUNNING) {
+			urb->start_frame = xep->next_frame_id;
+			goto skip_start_over;
+		}
+	}
+
+	start_frame = readl(&xhci->run_regs->microframe_index);
+	start_frame &= 0x3fff;
+	/*
+	 * Round up to the next frame and consider the time before trb really
+	 * gets scheduled by hardare.
+	 */
+	ist = HCS_IST(xhci->hcs_params2) & 0x7;
+	if (HCS_IST(xhci->hcs_params2) & (1 << 3))
+		ist <<= 3;
+	start_frame += ist + XHCI_CFC_DELAY;
+	start_frame = roundup(start_frame, 8);
+
+	/*
+	 * Round up to the next ESIT (Endpoint Service Interval Time) if ESIT
+	 * is greate than 8 microframes.
+	 */
+	if (urb->dev->speed == USB_SPEED_LOW ||
+			urb->dev->speed == USB_SPEED_FULL) {
+		start_frame = roundup(start_frame, urb->interval << 3);
+		urb->start_frame = start_frame >> 3;
+	} else {
+		start_frame = roundup(start_frame, urb->interval);
+		urb->start_frame = start_frame;
+	}
+
+skip_start_over:
+	ep_ring->num_trbs_free_temp = ep_ring->num_trbs_free;
+
+	return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index);
+}
+
+/****		Command Ring Operations		****/
+
+/* Generic function for queueing a command TRB on the command ring.
+ * Check to make sure there's room on the command ring for one command TRB.
+ * Also check that there's room reserved for commands that must not fail.
+ * If this is a command that must not fail, meaning command_must_succeed = TRUE,
+ * then only check for the number of reserved spots.
+ * Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB
+ * because the command event handler may want to resubmit a failed command.
+ */
+static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
+			 u32 field1, u32 field2,
+			 u32 field3, u32 field4, bool command_must_succeed)
+{
+	int reserved_trbs = xhci->cmd_ring_reserved_trbs;
+	int ret;
+
+	if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+		(xhci->xhc_state & XHCI_STATE_HALTED)) {
+		xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n");
+		return -ESHUTDOWN;
+	}
+
+	if (!command_must_succeed)
+		reserved_trbs++;
+
+	ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
+			reserved_trbs, GFP_ATOMIC);
+	if (ret < 0) {
+		xhci_err(xhci, "ERR: No room for command on command ring\n");
+		if (command_must_succeed)
+			xhci_err(xhci, "ERR: Reserved TRB counting for "
+					"unfailable commands failed.\n");
+		return ret;
+	}
+
+	cmd->command_trb = xhci->cmd_ring->enqueue;
+
+	/* if there are no other commands queued we start the timeout timer */
+	if (list_empty(&xhci->cmd_list)) {
+		xhci->current_cmd = cmd;
+		xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
+	}
+
+	list_add_tail(&cmd->cmd_list, &xhci->cmd_list);
+
+	queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
+			field4 | xhci->cmd_ring->cycle_state);
+	return 0;
+}
+
+/* Queue a slot enable or disable request on the command ring */
+int xhci_queue_slot_control(struct xhci_hcd *xhci, struct xhci_command *cmd,
+		u32 trb_type, u32 slot_id)
+{
+	return queue_command(xhci, cmd, 0, 0, 0,
+			TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id), false);
+}
+
+/* Queue an address device command TRB */
+int xhci_queue_address_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
+		dma_addr_t in_ctx_ptr, u32 slot_id, enum xhci_setup_dev setup)
+{
+	return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr),
+			upper_32_bits(in_ctx_ptr), 0,
+			TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id)
+			| (setup == SETUP_CONTEXT_ONLY ? TRB_BSR : 0), false);
+}
+
+int xhci_queue_vendor_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
+		u32 field1, u32 field2, u32 field3, u32 field4)
+{
+	return queue_command(xhci, cmd, field1, field2, field3, field4, false);
+}
+
+/* Queue a reset device command TRB */
+int xhci_queue_reset_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
+		u32 slot_id)
+{
+	return queue_command(xhci, cmd, 0, 0, 0,
+			TRB_TYPE(TRB_RESET_DEV) | SLOT_ID_FOR_TRB(slot_id),
+			false);
+}
+
+/* Queue a configure endpoint command TRB */
+int xhci_queue_configure_endpoint(struct xhci_hcd *xhci,
+		struct xhci_command *cmd, dma_addr_t in_ctx_ptr,
+		u32 slot_id, bool command_must_succeed)
+{
+	return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr),
+			upper_32_bits(in_ctx_ptr), 0,
+			TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id),
+			command_must_succeed);
+}
+
+/* Queue an evaluate context command TRB */
+int xhci_queue_evaluate_context(struct xhci_hcd *xhci, struct xhci_command *cmd,
+		dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed)
+{
+	return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr),
+			upper_32_bits(in_ctx_ptr), 0,
+			TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id),
+			command_must_succeed);
+}
+
+/*
+ * Suspend is set to indicate "Stop Endpoint Command" is being issued to stop
+ * activity on an endpoint that is about to be suspended.
+ */
+int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, struct xhci_command *cmd,
+			     int slot_id, unsigned int ep_index, int suspend)
+{
+	u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
+	u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
+	u32 type = TRB_TYPE(TRB_STOP_RING);
+	u32 trb_suspend = SUSPEND_PORT_FOR_TRB(suspend);
+
+	return queue_command(xhci, cmd, 0, 0, 0,
+			trb_slot_id | trb_ep_index | type | trb_suspend, false);
+}
+
+int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd,
+			int slot_id, unsigned int ep_index,
+			enum xhci_ep_reset_type reset_type)
+{
+	u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
+	u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
+	u32 type = TRB_TYPE(TRB_RESET_EP);
+
+	if (reset_type == EP_SOFT_RESET)
+		type |= TRB_TSP;
+
+	return queue_command(xhci, cmd, 0, 0, 0,
+			trb_slot_id | trb_ep_index | type, false);
+}
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
new file mode 100644
index 000000000..51eabc5e8
--- /dev/null
+++ b/drivers/usb/host/xhci-tegra.c
@@ -0,0 +1,2460 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NVIDIA Tegra xHCI host controller driver
+ *
+ * Copyright (c) 2014-2020, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (C) 2014 Google, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/firmware.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/phy/phy.h>
+#include <linux/phy/tegra/xusb.h>
+#include <linux/platform_device.h>
+#include <linux/usb/ch9.h>
+#include <linux/pm.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/role.h>
+#include <soc/tegra/pmc.h>
+
+#include "xhci.h"
+
+#define TEGRA_XHCI_SS_HIGH_SPEED 120000000
+#define TEGRA_XHCI_SS_LOW_SPEED   12000000
+
+/* FPCI CFG registers */
+#define XUSB_CFG_1				0x004
+#define  XUSB_IO_SPACE_EN			BIT(0)
+#define  XUSB_MEM_SPACE_EN			BIT(1)
+#define  XUSB_BUS_MASTER_EN			BIT(2)
+#define XUSB_CFG_4				0x010
+#define  XUSB_BASE_ADDR_SHIFT			15
+#define  XUSB_BASE_ADDR_MASK			0x1ffff
+#define XUSB_CFG_16				0x040
+#define XUSB_CFG_24				0x060
+#define XUSB_CFG_AXI_CFG			0x0f8
+#define XUSB_CFG_ARU_C11_CSBRANGE		0x41c
+#define XUSB_CFG_ARU_CONTEXT			0x43c
+#define XUSB_CFG_ARU_CONTEXT_HS_PLS		0x478
+#define XUSB_CFG_ARU_CONTEXT_FS_PLS		0x47c
+#define XUSB_CFG_ARU_CONTEXT_HSFS_SPEED		0x480
+#define XUSB_CFG_ARU_CONTEXT_HSFS_PP		0x484
+#define XUSB_CFG_CSB_BASE_ADDR			0x800
+
+/* FPCI mailbox registers */
+/* XUSB_CFG_ARU_MBOX_CMD */
+#define  MBOX_DEST_FALC				BIT(27)
+#define  MBOX_DEST_PME				BIT(28)
+#define  MBOX_DEST_SMI				BIT(29)
+#define  MBOX_DEST_XHCI				BIT(30)
+#define  MBOX_INT_EN				BIT(31)
+/* XUSB_CFG_ARU_MBOX_DATA_IN and XUSB_CFG_ARU_MBOX_DATA_OUT */
+#define  CMD_DATA_SHIFT				0
+#define  CMD_DATA_MASK				0xffffff
+#define  CMD_TYPE_SHIFT				24
+#define  CMD_TYPE_MASK				0xff
+/* XUSB_CFG_ARU_MBOX_OWNER */
+#define  MBOX_OWNER_NONE			0
+#define  MBOX_OWNER_FW				1
+#define  MBOX_OWNER_SW				2
+#define XUSB_CFG_ARU_SMI_INTR			0x428
+#define  MBOX_SMI_INTR_FW_HANG			BIT(1)
+#define  MBOX_SMI_INTR_EN			BIT(3)
+
+/* IPFS registers */
+#define IPFS_XUSB_HOST_MSI_BAR_SZ_0		0x0c0
+#define IPFS_XUSB_HOST_MSI_AXI_BAR_ST_0		0x0c4
+#define IPFS_XUSB_HOST_MSI_FPCI_BAR_ST_0	0x0c8
+#define IPFS_XUSB_HOST_MSI_VEC0_0		0x100
+#define IPFS_XUSB_HOST_MSI_EN_VEC0_0		0x140
+#define IPFS_XUSB_HOST_CONFIGURATION_0		0x180
+#define  IPFS_EN_FPCI				BIT(0)
+#define IPFS_XUSB_HOST_FPCI_ERROR_MASKS_0	0x184
+#define IPFS_XUSB_HOST_INTR_MASK_0		0x188
+#define  IPFS_IP_INT_MASK			BIT(16)
+#define IPFS_XUSB_HOST_INTR_ENABLE_0		0x198
+#define IPFS_XUSB_HOST_UFPCI_CONFIG_0		0x19c
+#define IPFS_XUSB_HOST_CLKGATE_HYSTERESIS_0	0x1bc
+#define IPFS_XUSB_HOST_MCCIF_FIFOCTRL_0		0x1dc
+
+#define CSB_PAGE_SELECT_MASK			0x7fffff
+#define CSB_PAGE_SELECT_SHIFT			9
+#define CSB_PAGE_OFFSET_MASK			0x1ff
+#define CSB_PAGE_SELECT(addr)	((addr) >> (CSB_PAGE_SELECT_SHIFT) &	\
+				 CSB_PAGE_SELECT_MASK)
+#define CSB_PAGE_OFFSET(addr)	((addr) & CSB_PAGE_OFFSET_MASK)
+
+/* Falcon CSB registers */
+#define XUSB_FALC_CPUCTL			0x100
+#define  CPUCTL_STARTCPU			BIT(1)
+#define  CPUCTL_STATE_HALTED			BIT(4)
+#define  CPUCTL_STATE_STOPPED			BIT(5)
+#define XUSB_FALC_BOOTVEC			0x104
+#define XUSB_FALC_DMACTL			0x10c
+#define XUSB_FALC_IMFILLRNG1			0x154
+#define  IMFILLRNG1_TAG_MASK			0xffff
+#define  IMFILLRNG1_TAG_LO_SHIFT		0
+#define  IMFILLRNG1_TAG_HI_SHIFT		16
+#define XUSB_FALC_IMFILLCTL			0x158
+
+/* MP CSB registers */
+#define XUSB_CSB_MP_ILOAD_ATTR			0x101a00
+#define XUSB_CSB_MP_ILOAD_BASE_LO		0x101a04
+#define XUSB_CSB_MP_ILOAD_BASE_HI		0x101a08
+#define XUSB_CSB_MP_L2IMEMOP_SIZE		0x101a10
+#define  L2IMEMOP_SIZE_SRC_OFFSET_SHIFT		8
+#define  L2IMEMOP_SIZE_SRC_OFFSET_MASK		0x3ff
+#define  L2IMEMOP_SIZE_SRC_COUNT_SHIFT		24
+#define  L2IMEMOP_SIZE_SRC_COUNT_MASK		0xff
+#define XUSB_CSB_MP_L2IMEMOP_TRIG		0x101a14
+#define  L2IMEMOP_ACTION_SHIFT			24
+#define  L2IMEMOP_INVALIDATE_ALL		(0x40 << L2IMEMOP_ACTION_SHIFT)
+#define  L2IMEMOP_LOAD_LOCKED_RESULT		(0x11 << L2IMEMOP_ACTION_SHIFT)
+#define XUSB_CSB_MEMPOOL_L2IMEMOP_RESULT	0x101a18
+#define  L2IMEMOP_RESULT_VLD			BIT(31)
+#define XUSB_CSB_MP_APMAP			0x10181c
+#define  APMAP_BOOTPATH				BIT(31)
+
+#define IMEM_BLOCK_SIZE				256
+
+struct tegra_xusb_fw_header {
+	__le32 boot_loadaddr_in_imem;
+	__le32 boot_codedfi_offset;
+	__le32 boot_codetag;
+	__le32 boot_codesize;
+	__le32 phys_memaddr;
+	__le16 reqphys_memsize;
+	__le16 alloc_phys_memsize;
+	__le32 rodata_img_offset;
+	__le32 rodata_section_start;
+	__le32 rodata_section_end;
+	__le32 main_fnaddr;
+	__le32 fwimg_cksum;
+	__le32 fwimg_created_time;
+	__le32 imem_resident_start;
+	__le32 imem_resident_end;
+	__le32 idirect_start;
+	__le32 idirect_end;
+	__le32 l2_imem_start;
+	__le32 l2_imem_end;
+	__le32 version_id;
+	u8 init_ddirect;
+	u8 reserved[3];
+	__le32 phys_addr_log_buffer;
+	__le32 total_log_entries;
+	__le32 dequeue_ptr;
+	__le32 dummy_var[2];
+	__le32 fwimg_len;
+	u8 magic[8];
+	__le32 ss_low_power_entry_timeout;
+	u8 num_hsic_port;
+	u8 padding[139]; /* Pad to 256 bytes */
+};
+
+struct tegra_xusb_phy_type {
+	const char *name;
+	unsigned int num;
+};
+
+struct tegra_xusb_mbox_regs {
+	u16 cmd;
+	u16 data_in;
+	u16 data_out;
+	u16 owner;
+};
+
+struct tegra_xusb_context_soc {
+	struct {
+		const unsigned int *offsets;
+		unsigned int num_offsets;
+	} ipfs;
+
+	struct {
+		const unsigned int *offsets;
+		unsigned int num_offsets;
+	} fpci;
+};
+
+struct tegra_xusb_soc {
+	const char *firmware;
+	const char * const *supply_names;
+	unsigned int num_supplies;
+	const struct tegra_xusb_phy_type *phy_types;
+	unsigned int num_types;
+	const struct tegra_xusb_context_soc *context;
+
+	struct {
+		struct {
+			unsigned int offset;
+			unsigned int count;
+		} usb2, ulpi, hsic, usb3;
+	} ports;
+
+	struct tegra_xusb_mbox_regs mbox;
+
+	bool scale_ss_clock;
+	bool has_ipfs;
+	bool lpm_support;
+	bool otg_reset_sspi;
+};
+
+struct tegra_xusb_context {
+	u32 *ipfs;
+	u32 *fpci;
+};
+
+struct tegra_xusb {
+	struct device *dev;
+	void __iomem *regs;
+	struct usb_hcd *hcd;
+
+	struct mutex lock;
+
+	int xhci_irq;
+	int mbox_irq;
+	int padctl_irq;
+
+	void __iomem *ipfs_base;
+	void __iomem *fpci_base;
+
+	const struct tegra_xusb_soc *soc;
+
+	struct regulator_bulk_data *supplies;
+
+	struct tegra_xusb_padctl *padctl;
+
+	struct clk *host_clk;
+	struct clk *falcon_clk;
+	struct clk *ss_clk;
+	struct clk *ss_src_clk;
+	struct clk *hs_src_clk;
+	struct clk *fs_src_clk;
+	struct clk *pll_u_480m;
+	struct clk *clk_m;
+	struct clk *pll_e;
+
+	struct reset_control *host_rst;
+	struct reset_control *ss_rst;
+
+	struct device *genpd_dev_host;
+	struct device *genpd_dev_ss;
+	bool use_genpd;
+
+	struct phy **phys;
+	unsigned int num_phys;
+
+	struct usb_phy **usbphy;
+	unsigned int num_usb_phys;
+	int otg_usb2_port;
+	int otg_usb3_port;
+	bool host_mode;
+	struct notifier_block id_nb;
+	struct work_struct id_work;
+
+	/* Firmware loading related */
+	struct {
+		size_t size;
+		void *virt;
+		dma_addr_t phys;
+	} fw;
+
+	bool suspended;
+	struct tegra_xusb_context context;
+};
+
+static struct hc_driver __read_mostly tegra_xhci_hc_driver;
+
+static inline u32 fpci_readl(struct tegra_xusb *tegra, unsigned int offset)
+{
+	return readl(tegra->fpci_base + offset);
+}
+
+static inline void fpci_writel(struct tegra_xusb *tegra, u32 value,
+			       unsigned int offset)
+{
+	writel(value, tegra->fpci_base + offset);
+}
+
+static inline u32 ipfs_readl(struct tegra_xusb *tegra, unsigned int offset)
+{
+	return readl(tegra->ipfs_base + offset);
+}
+
+static inline void ipfs_writel(struct tegra_xusb *tegra, u32 value,
+			       unsigned int offset)
+{
+	writel(value, tegra->ipfs_base + offset);
+}
+
+static u32 csb_readl(struct tegra_xusb *tegra, unsigned int offset)
+{
+	u32 page = CSB_PAGE_SELECT(offset);
+	u32 ofs = CSB_PAGE_OFFSET(offset);
+
+	fpci_writel(tegra, page, XUSB_CFG_ARU_C11_CSBRANGE);
+
+	return fpci_readl(tegra, XUSB_CFG_CSB_BASE_ADDR + ofs);
+}
+
+static void csb_writel(struct tegra_xusb *tegra, u32 value,
+		       unsigned int offset)
+{
+	u32 page = CSB_PAGE_SELECT(offset);
+	u32 ofs = CSB_PAGE_OFFSET(offset);
+
+	fpci_writel(tegra, page, XUSB_CFG_ARU_C11_CSBRANGE);
+	fpci_writel(tegra, value, XUSB_CFG_CSB_BASE_ADDR + ofs);
+}
+
+static int tegra_xusb_set_ss_clk(struct tegra_xusb *tegra,
+				 unsigned long rate)
+{
+	unsigned long new_parent_rate, old_parent_rate;
+	struct clk *clk = tegra->ss_src_clk;
+	unsigned int div;
+	int err;
+
+	if (clk_get_rate(clk) == rate)
+		return 0;
+
+	switch (rate) {
+	case TEGRA_XHCI_SS_HIGH_SPEED:
+		/*
+		 * Reparent to PLLU_480M. Set divider first to avoid
+		 * overclocking.
+		 */
+		old_parent_rate = clk_get_rate(clk_get_parent(clk));
+		new_parent_rate = clk_get_rate(tegra->pll_u_480m);
+		div = new_parent_rate / rate;
+
+		err = clk_set_rate(clk, old_parent_rate / div);
+		if (err)
+			return err;
+
+		err = clk_set_parent(clk, tegra->pll_u_480m);
+		if (err)
+			return err;
+
+		/*
+		 * The rate should already be correct, but set it again just
+		 * to be sure.
+		 */
+		err = clk_set_rate(clk, rate);
+		if (err)
+			return err;
+
+		break;
+
+	case TEGRA_XHCI_SS_LOW_SPEED:
+		/* Reparent to CLK_M */
+		err = clk_set_parent(clk, tegra->clk_m);
+		if (err)
+			return err;
+
+		err = clk_set_rate(clk, rate);
+		if (err)
+			return err;
+
+		break;
+
+	default:
+		dev_err(tegra->dev, "Invalid SS rate: %lu Hz\n", rate);
+		return -EINVAL;
+	}
+
+	if (clk_get_rate(clk) != rate) {
+		dev_err(tegra->dev, "SS clock doesn't match requested rate\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static unsigned long extract_field(u32 value, unsigned int start,
+				   unsigned int count)
+{
+	return (value >> start) & ((1 << count) - 1);
+}
+
+/* Command requests from the firmware */
+enum tegra_xusb_mbox_cmd {
+	MBOX_CMD_MSG_ENABLED = 1,
+	MBOX_CMD_INC_FALC_CLOCK,
+	MBOX_CMD_DEC_FALC_CLOCK,
+	MBOX_CMD_INC_SSPI_CLOCK,
+	MBOX_CMD_DEC_SSPI_CLOCK,
+	MBOX_CMD_SET_BW, /* no ACK/NAK required */
+	MBOX_CMD_SET_SS_PWR_GATING,
+	MBOX_CMD_SET_SS_PWR_UNGATING,
+	MBOX_CMD_SAVE_DFE_CTLE_CTX,
+	MBOX_CMD_AIRPLANE_MODE_ENABLED, /* unused */
+	MBOX_CMD_AIRPLANE_MODE_DISABLED, /* unused */
+	MBOX_CMD_START_HSIC_IDLE,
+	MBOX_CMD_STOP_HSIC_IDLE,
+	MBOX_CMD_DBC_WAKE_STACK, /* unused */
+	MBOX_CMD_HSIC_PRETEND_CONNECT,
+	MBOX_CMD_RESET_SSPI,
+	MBOX_CMD_DISABLE_SS_LFPS_DETECTION,
+	MBOX_CMD_ENABLE_SS_LFPS_DETECTION,
+
+	MBOX_CMD_MAX,
+
+	/* Response message to above commands */
+	MBOX_CMD_ACK = 128,
+	MBOX_CMD_NAK
+};
+
+struct tegra_xusb_mbox_msg {
+	u32 cmd;
+	u32 data;
+};
+
+static inline u32 tegra_xusb_mbox_pack(const struct tegra_xusb_mbox_msg *msg)
+{
+	return (msg->cmd & CMD_TYPE_MASK) << CMD_TYPE_SHIFT |
+	       (msg->data & CMD_DATA_MASK) << CMD_DATA_SHIFT;
+}
+static inline void tegra_xusb_mbox_unpack(struct tegra_xusb_mbox_msg *msg,
+					  u32 value)
+{
+	msg->cmd = (value >> CMD_TYPE_SHIFT) & CMD_TYPE_MASK;
+	msg->data = (value >> CMD_DATA_SHIFT) & CMD_DATA_MASK;
+}
+
+static bool tegra_xusb_mbox_cmd_requires_ack(enum tegra_xusb_mbox_cmd cmd)
+{
+	switch (cmd) {
+	case MBOX_CMD_SET_BW:
+	case MBOX_CMD_ACK:
+	case MBOX_CMD_NAK:
+		return false;
+
+	default:
+		return true;
+	}
+}
+
+static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
+				const struct tegra_xusb_mbox_msg *msg)
+{
+	bool wait_for_idle = false;
+	u32 value;
+
+	/*
+	 * Acquire the mailbox. The firmware still owns the mailbox for
+	 * ACK/NAK messages.
+	 */
+	if (!(msg->cmd == MBOX_CMD_ACK || msg->cmd == MBOX_CMD_NAK)) {
+		value = fpci_readl(tegra, tegra->soc->mbox.owner);
+		if (value != MBOX_OWNER_NONE) {
+			dev_err(tegra->dev, "mailbox is busy\n");
+			return -EBUSY;
+		}
+
+		fpci_writel(tegra, MBOX_OWNER_SW, tegra->soc->mbox.owner);
+
+		value = fpci_readl(tegra, tegra->soc->mbox.owner);
+		if (value != MBOX_OWNER_SW) {
+			dev_err(tegra->dev, "failed to acquire mailbox\n");
+			return -EBUSY;
+		}
+
+		wait_for_idle = true;
+	}
+
+	value = tegra_xusb_mbox_pack(msg);
+	fpci_writel(tegra, value, tegra->soc->mbox.data_in);
+
+	value = fpci_readl(tegra, tegra->soc->mbox.cmd);
+	value |= MBOX_INT_EN | MBOX_DEST_FALC;
+	fpci_writel(tegra, value, tegra->soc->mbox.cmd);
+
+	if (wait_for_idle) {
+		unsigned long timeout = jiffies + msecs_to_jiffies(250);
+
+		while (time_before(jiffies, timeout)) {
+			value = fpci_readl(tegra, tegra->soc->mbox.owner);
+			if (value == MBOX_OWNER_NONE)
+				break;
+
+			usleep_range(10, 20);
+		}
+
+		if (time_after(jiffies, timeout))
+			value = fpci_readl(tegra, tegra->soc->mbox.owner);
+
+		if (value != MBOX_OWNER_NONE)
+			return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static irqreturn_t tegra_xusb_mbox_irq(int irq, void *data)
+{
+	struct tegra_xusb *tegra = data;
+	u32 value;
+
+	/* clear mailbox interrupts */
+	value = fpci_readl(tegra, XUSB_CFG_ARU_SMI_INTR);
+	fpci_writel(tegra, value, XUSB_CFG_ARU_SMI_INTR);
+
+	if (value & MBOX_SMI_INTR_FW_HANG)
+		dev_err(tegra->dev, "controller firmware hang\n");
+
+	return IRQ_WAKE_THREAD;
+}
+
+static void tegra_xusb_mbox_handle(struct tegra_xusb *tegra,
+				   const struct tegra_xusb_mbox_msg *msg)
+{
+	struct tegra_xusb_padctl *padctl = tegra->padctl;
+	const struct tegra_xusb_soc *soc = tegra->soc;
+	struct device *dev = tegra->dev;
+	struct tegra_xusb_mbox_msg rsp;
+	unsigned long mask;
+	unsigned int port;
+	bool idle, enable;
+	int err = 0;
+
+	memset(&rsp, 0, sizeof(rsp));
+
+	switch (msg->cmd) {
+	case MBOX_CMD_INC_FALC_CLOCK:
+	case MBOX_CMD_DEC_FALC_CLOCK:
+		rsp.data = clk_get_rate(tegra->falcon_clk) / 1000;
+		if (rsp.data != msg->data)
+			rsp.cmd = MBOX_CMD_NAK;
+		else
+			rsp.cmd = MBOX_CMD_ACK;
+
+		break;
+
+	case MBOX_CMD_INC_SSPI_CLOCK:
+	case MBOX_CMD_DEC_SSPI_CLOCK:
+		if (tegra->soc->scale_ss_clock) {
+			err = tegra_xusb_set_ss_clk(tegra, msg->data * 1000);
+			if (err < 0)
+				rsp.cmd = MBOX_CMD_NAK;
+			else
+				rsp.cmd = MBOX_CMD_ACK;
+
+			rsp.data = clk_get_rate(tegra->ss_src_clk) / 1000;
+		} else {
+			rsp.cmd = MBOX_CMD_ACK;
+			rsp.data = msg->data;
+		}
+
+		break;
+
+	case MBOX_CMD_SET_BW:
+		/*
+		 * TODO: Request bandwidth once EMC scaling is supported.
+		 * Ignore for now since ACK/NAK is not required for SET_BW
+		 * messages.
+		 */
+		break;
+
+	case MBOX_CMD_SAVE_DFE_CTLE_CTX:
+		err = tegra_xusb_padctl_usb3_save_context(padctl, msg->data);
+		if (err < 0) {
+			dev_err(dev, "failed to save context for USB3#%u: %d\n",
+				msg->data, err);
+			rsp.cmd = MBOX_CMD_NAK;
+		} else {
+			rsp.cmd = MBOX_CMD_ACK;
+		}
+
+		rsp.data = msg->data;
+		break;
+
+	case MBOX_CMD_START_HSIC_IDLE:
+	case MBOX_CMD_STOP_HSIC_IDLE:
+		if (msg->cmd == MBOX_CMD_STOP_HSIC_IDLE)
+			idle = false;
+		else
+			idle = true;
+
+		mask = extract_field(msg->data, 1 + soc->ports.hsic.offset,
+				     soc->ports.hsic.count);
+
+		for_each_set_bit(port, &mask, 32) {
+			err = tegra_xusb_padctl_hsic_set_idle(padctl, port,
+							      idle);
+			if (err < 0)
+				break;
+		}
+
+		if (err < 0) {
+			dev_err(dev, "failed to set HSIC#%u %s: %d\n", port,
+				idle ? "idle" : "busy", err);
+			rsp.cmd = MBOX_CMD_NAK;
+		} else {
+			rsp.cmd = MBOX_CMD_ACK;
+		}
+
+		rsp.data = msg->data;
+		break;
+
+	case MBOX_CMD_DISABLE_SS_LFPS_DETECTION:
+	case MBOX_CMD_ENABLE_SS_LFPS_DETECTION:
+		if (msg->cmd == MBOX_CMD_DISABLE_SS_LFPS_DETECTION)
+			enable = false;
+		else
+			enable = true;
+
+		mask = extract_field(msg->data, 1 + soc->ports.usb3.offset,
+				     soc->ports.usb3.count);
+
+		for_each_set_bit(port, &mask, soc->ports.usb3.count) {
+			err = tegra_xusb_padctl_usb3_set_lfps_detect(padctl,
+								     port,
+								     enable);
+			if (err < 0)
+				break;
+
+			/*
+			 * wait 500us for LFPS detector to be disabled before
+			 * sending ACK
+			 */
+			if (!enable)
+				usleep_range(500, 1000);
+		}
+
+		if (err < 0) {
+			dev_err(dev,
+				"failed to %s LFPS detection on USB3#%u: %d\n",
+				enable ? "enable" : "disable", port, err);
+			rsp.cmd = MBOX_CMD_NAK;
+		} else {
+			rsp.cmd = MBOX_CMD_ACK;
+		}
+
+		rsp.data = msg->data;
+		break;
+
+	default:
+		dev_warn(dev, "unknown message: %#x\n", msg->cmd);
+		break;
+	}
+
+	if (rsp.cmd) {
+		const char *cmd = (rsp.cmd == MBOX_CMD_ACK) ? "ACK" : "NAK";
+
+		err = tegra_xusb_mbox_send(tegra, &rsp);
+		if (err < 0)
+			dev_err(dev, "failed to send %s: %d\n", cmd, err);
+	}
+}
+
+static irqreturn_t tegra_xusb_mbox_thread(int irq, void *data)
+{
+	struct tegra_xusb *tegra = data;
+	struct tegra_xusb_mbox_msg msg;
+	u32 value;
+
+	mutex_lock(&tegra->lock);
+
+	if (pm_runtime_suspended(tegra->dev) || tegra->suspended)
+		goto out;
+
+	value = fpci_readl(tegra, tegra->soc->mbox.data_out);
+	tegra_xusb_mbox_unpack(&msg, value);
+
+	value = fpci_readl(tegra, tegra->soc->mbox.cmd);
+	value &= ~MBOX_DEST_SMI;
+	fpci_writel(tegra, value, tegra->soc->mbox.cmd);
+
+	/* clear mailbox owner if no ACK/NAK is required */
+	if (!tegra_xusb_mbox_cmd_requires_ack(msg.cmd))
+		fpci_writel(tegra, MBOX_OWNER_NONE, tegra->soc->mbox.owner);
+
+	tegra_xusb_mbox_handle(tegra, &msg);
+
+out:
+	mutex_unlock(&tegra->lock);
+	return IRQ_HANDLED;
+}
+
+static void tegra_xusb_config(struct tegra_xusb *tegra)
+{
+	u32 regs = tegra->hcd->rsrc_start;
+	u32 value;
+
+	if (tegra->soc->has_ipfs) {
+		value = ipfs_readl(tegra, IPFS_XUSB_HOST_CONFIGURATION_0);
+		value |= IPFS_EN_FPCI;
+		ipfs_writel(tegra, value, IPFS_XUSB_HOST_CONFIGURATION_0);
+
+		usleep_range(10, 20);
+	}
+
+	/* Program BAR0 space */
+	value = fpci_readl(tegra, XUSB_CFG_4);
+	value &= ~(XUSB_BASE_ADDR_MASK << XUSB_BASE_ADDR_SHIFT);
+	value |= regs & (XUSB_BASE_ADDR_MASK << XUSB_BASE_ADDR_SHIFT);
+	fpci_writel(tegra, value, XUSB_CFG_4);
+
+	usleep_range(100, 200);
+
+	/* Enable bus master */
+	value = fpci_readl(tegra, XUSB_CFG_1);
+	value |= XUSB_IO_SPACE_EN | XUSB_MEM_SPACE_EN | XUSB_BUS_MASTER_EN;
+	fpci_writel(tegra, value, XUSB_CFG_1);
+
+	if (tegra->soc->has_ipfs) {
+		/* Enable interrupt assertion */
+		value = ipfs_readl(tegra, IPFS_XUSB_HOST_INTR_MASK_0);
+		value |= IPFS_IP_INT_MASK;
+		ipfs_writel(tegra, value, IPFS_XUSB_HOST_INTR_MASK_0);
+
+		/* Set hysteresis */
+		ipfs_writel(tegra, 0x80, IPFS_XUSB_HOST_CLKGATE_HYSTERESIS_0);
+	}
+}
+
+static int tegra_xusb_clk_enable(struct tegra_xusb *tegra)
+{
+	int err;
+
+	err = clk_prepare_enable(tegra->pll_e);
+	if (err < 0)
+		return err;
+
+	err = clk_prepare_enable(tegra->host_clk);
+	if (err < 0)
+		goto disable_plle;
+
+	err = clk_prepare_enable(tegra->ss_clk);
+	if (err < 0)
+		goto disable_host;
+
+	err = clk_prepare_enable(tegra->falcon_clk);
+	if (err < 0)
+		goto disable_ss;
+
+	err = clk_prepare_enable(tegra->fs_src_clk);
+	if (err < 0)
+		goto disable_falc;
+
+	err = clk_prepare_enable(tegra->hs_src_clk);
+	if (err < 0)
+		goto disable_fs_src;
+
+	if (tegra->soc->scale_ss_clock) {
+		err = tegra_xusb_set_ss_clk(tegra, TEGRA_XHCI_SS_HIGH_SPEED);
+		if (err < 0)
+			goto disable_hs_src;
+	}
+
+	return 0;
+
+disable_hs_src:
+	clk_disable_unprepare(tegra->hs_src_clk);
+disable_fs_src:
+	clk_disable_unprepare(tegra->fs_src_clk);
+disable_falc:
+	clk_disable_unprepare(tegra->falcon_clk);
+disable_ss:
+	clk_disable_unprepare(tegra->ss_clk);
+disable_host:
+	clk_disable_unprepare(tegra->host_clk);
+disable_plle:
+	clk_disable_unprepare(tegra->pll_e);
+	return err;
+}
+
+static void tegra_xusb_clk_disable(struct tegra_xusb *tegra)
+{
+	clk_disable_unprepare(tegra->pll_e);
+	clk_disable_unprepare(tegra->host_clk);
+	clk_disable_unprepare(tegra->ss_clk);
+	clk_disable_unprepare(tegra->falcon_clk);
+	clk_disable_unprepare(tegra->fs_src_clk);
+	clk_disable_unprepare(tegra->hs_src_clk);
+}
+
+static int tegra_xusb_phy_enable(struct tegra_xusb *tegra)
+{
+	unsigned int i;
+	int err;
+
+	for (i = 0; i < tegra->num_phys; i++) {
+		err = phy_init(tegra->phys[i]);
+		if (err)
+			goto disable_phy;
+
+		err = phy_power_on(tegra->phys[i]);
+		if (err) {
+			phy_exit(tegra->phys[i]);
+			goto disable_phy;
+		}
+	}
+
+	return 0;
+
+disable_phy:
+	while (i--) {
+		phy_power_off(tegra->phys[i]);
+		phy_exit(tegra->phys[i]);
+	}
+
+	return err;
+}
+
+static void tegra_xusb_phy_disable(struct tegra_xusb *tegra)
+{
+	unsigned int i;
+
+	for (i = 0; i < tegra->num_phys; i++) {
+		phy_power_off(tegra->phys[i]);
+		phy_exit(tegra->phys[i]);
+	}
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tegra_xusb_init_context(struct tegra_xusb *tegra)
+{
+	const struct tegra_xusb_context_soc *soc = tegra->soc->context;
+
+	tegra->context.ipfs = devm_kcalloc(tegra->dev, soc->ipfs.num_offsets,
+					   sizeof(u32), GFP_KERNEL);
+	if (!tegra->context.ipfs)
+		return -ENOMEM;
+
+	tegra->context.fpci = devm_kcalloc(tegra->dev, soc->fpci.num_offsets,
+					   sizeof(u32), GFP_KERNEL);
+	if (!tegra->context.fpci)
+		return -ENOMEM;
+
+	return 0;
+}
+#else
+static inline int tegra_xusb_init_context(struct tegra_xusb *tegra)
+{
+	return 0;
+}
+#endif
+
+static int tegra_xusb_request_firmware(struct tegra_xusb *tegra)
+{
+	struct tegra_xusb_fw_header *header;
+	const struct firmware *fw;
+	int err;
+
+	err = request_firmware(&fw, tegra->soc->firmware, tegra->dev);
+	if (err < 0) {
+		dev_err(tegra->dev, "failed to request firmware: %d\n", err);
+		return err;
+	}
+
+	/* Load Falcon controller with its firmware. */
+	header = (struct tegra_xusb_fw_header *)fw->data;
+	tegra->fw.size = le32_to_cpu(header->fwimg_len);
+
+	tegra->fw.virt = dma_alloc_coherent(tegra->dev, tegra->fw.size,
+					    &tegra->fw.phys, GFP_KERNEL);
+	if (!tegra->fw.virt) {
+		dev_err(tegra->dev, "failed to allocate memory for firmware\n");
+		release_firmware(fw);
+		return -ENOMEM;
+	}
+
+	header = (struct tegra_xusb_fw_header *)tegra->fw.virt;
+	memcpy(tegra->fw.virt, fw->data, tegra->fw.size);
+	release_firmware(fw);
+
+	return 0;
+}
+
+static int tegra_xusb_load_firmware(struct tegra_xusb *tegra)
+{
+	unsigned int code_tag_blocks, code_size_blocks, code_blocks;
+	struct xhci_cap_regs __iomem *cap = tegra->regs;
+	struct tegra_xusb_fw_header *header;
+	struct device *dev = tegra->dev;
+	struct xhci_op_regs __iomem *op;
+	unsigned long timeout;
+	time64_t timestamp;
+	u64 address;
+	u32 value;
+	int err;
+
+	header = (struct tegra_xusb_fw_header *)tegra->fw.virt;
+	op = tegra->regs + HC_LENGTH(readl(&cap->hc_capbase));
+
+	if (csb_readl(tegra, XUSB_CSB_MP_ILOAD_BASE_LO) != 0) {
+		dev_info(dev, "Firmware already loaded, Falcon state %#x\n",
+			 csb_readl(tegra, XUSB_FALC_CPUCTL));
+		return 0;
+	}
+
+	/* Program the size of DFI into ILOAD_ATTR. */
+	csb_writel(tegra, tegra->fw.size, XUSB_CSB_MP_ILOAD_ATTR);
+
+	/*
+	 * Boot code of the firmware reads the ILOAD_BASE registers
+	 * to get to the start of the DFI in system memory.
+	 */
+	address = tegra->fw.phys + sizeof(*header);
+	csb_writel(tegra, address >> 32, XUSB_CSB_MP_ILOAD_BASE_HI);
+	csb_writel(tegra, address, XUSB_CSB_MP_ILOAD_BASE_LO);
+
+	/* Set BOOTPATH to 1 in APMAP. */
+	csb_writel(tegra, APMAP_BOOTPATH, XUSB_CSB_MP_APMAP);
+
+	/* Invalidate L2IMEM. */
+	csb_writel(tegra, L2IMEMOP_INVALIDATE_ALL, XUSB_CSB_MP_L2IMEMOP_TRIG);
+
+	/*
+	 * Initiate fetch of bootcode from system memory into L2IMEM.
+	 * Program bootcode location and size in system memory.
+	 */
+	code_tag_blocks = DIV_ROUND_UP(le32_to_cpu(header->boot_codetag),
+				       IMEM_BLOCK_SIZE);
+	code_size_blocks = DIV_ROUND_UP(le32_to_cpu(header->boot_codesize),
+					IMEM_BLOCK_SIZE);
+	code_blocks = code_tag_blocks + code_size_blocks;
+
+	value = ((code_tag_blocks & L2IMEMOP_SIZE_SRC_OFFSET_MASK) <<
+			L2IMEMOP_SIZE_SRC_OFFSET_SHIFT) |
+		((code_size_blocks & L2IMEMOP_SIZE_SRC_COUNT_MASK) <<
+			L2IMEMOP_SIZE_SRC_COUNT_SHIFT);
+	csb_writel(tegra, value, XUSB_CSB_MP_L2IMEMOP_SIZE);
+
+	/* Trigger L2IMEM load operation. */
+	csb_writel(tegra, L2IMEMOP_LOAD_LOCKED_RESULT,
+		   XUSB_CSB_MP_L2IMEMOP_TRIG);
+
+	/* Setup Falcon auto-fill. */
+	csb_writel(tegra, code_size_blocks, XUSB_FALC_IMFILLCTL);
+
+	value = ((code_tag_blocks & IMFILLRNG1_TAG_MASK) <<
+			IMFILLRNG1_TAG_LO_SHIFT) |
+		((code_blocks & IMFILLRNG1_TAG_MASK) <<
+			IMFILLRNG1_TAG_HI_SHIFT);
+	csb_writel(tegra, value, XUSB_FALC_IMFILLRNG1);
+
+	csb_writel(tegra, 0, XUSB_FALC_DMACTL);
+
+	/* wait for RESULT_VLD to get set */
+#define tegra_csb_readl(offset) csb_readl(tegra, offset)
+	err = readx_poll_timeout(tegra_csb_readl,
+				 XUSB_CSB_MEMPOOL_L2IMEMOP_RESULT, value,
+				 value & L2IMEMOP_RESULT_VLD, 100, 10000);
+	if (err < 0) {
+		dev_err(dev, "DMA controller not ready %#010x\n", value);
+		return err;
+	}
+#undef tegra_csb_readl
+
+	csb_writel(tegra, le32_to_cpu(header->boot_codetag),
+		   XUSB_FALC_BOOTVEC);
+
+	/* Boot Falcon CPU and wait for USBSTS_CNR to get cleared. */
+	csb_writel(tegra, CPUCTL_STARTCPU, XUSB_FALC_CPUCTL);
+
+	timeout = jiffies + msecs_to_jiffies(200);
+
+	do {
+		value = readl(&op->status);
+		if ((value & STS_CNR) == 0)
+			break;
+
+		usleep_range(1000, 2000);
+	} while (time_is_after_jiffies(timeout));
+
+	value = readl(&op->status);
+	if (value & STS_CNR) {
+		value = csb_readl(tegra, XUSB_FALC_CPUCTL);
+		dev_err(dev, "XHCI controller not read: %#010x\n", value);
+		return -EIO;
+	}
+
+	timestamp = le32_to_cpu(header->fwimg_created_time);
+
+	dev_info(dev, "Firmware timestamp: %ptTs UTC\n", &timestamp);
+
+	return 0;
+}
+
+static void tegra_xusb_powerdomain_remove(struct device *dev,
+					  struct tegra_xusb *tegra)
+{
+	if (!tegra->use_genpd)
+		return;
+
+	if (!IS_ERR_OR_NULL(tegra->genpd_dev_ss))
+		dev_pm_domain_detach(tegra->genpd_dev_ss, true);
+	if (!IS_ERR_OR_NULL(tegra->genpd_dev_host))
+		dev_pm_domain_detach(tegra->genpd_dev_host, true);
+}
+
+static int tegra_xusb_powerdomain_init(struct device *dev,
+				       struct tegra_xusb *tegra)
+{
+	int err;
+
+	tegra->genpd_dev_host = dev_pm_domain_attach_by_name(dev, "xusb_host");
+	if (IS_ERR(tegra->genpd_dev_host)) {
+		err = PTR_ERR(tegra->genpd_dev_host);
+		dev_err(dev, "failed to get host pm-domain: %d\n", err);
+		return err;
+	}
+
+	tegra->genpd_dev_ss = dev_pm_domain_attach_by_name(dev, "xusb_ss");
+	if (IS_ERR(tegra->genpd_dev_ss)) {
+		err = PTR_ERR(tegra->genpd_dev_ss);
+		dev_err(dev, "failed to get superspeed pm-domain: %d\n", err);
+		return err;
+	}
+
+	tegra->use_genpd = true;
+
+	return 0;
+}
+
+static int tegra_xusb_unpowergate_partitions(struct tegra_xusb *tegra)
+{
+	struct device *dev = tegra->dev;
+	int rc;
+
+	if (tegra->use_genpd) {
+		rc = pm_runtime_resume_and_get(tegra->genpd_dev_ss);
+		if (rc < 0) {
+			dev_err(dev, "failed to enable XUSB SS partition\n");
+			return rc;
+		}
+
+		rc = pm_runtime_resume_and_get(tegra->genpd_dev_host);
+		if (rc < 0) {
+			dev_err(dev, "failed to enable XUSB Host partition\n");
+			pm_runtime_put_sync(tegra->genpd_dev_ss);
+			return rc;
+		}
+	} else {
+		rc = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_XUSBA,
+							tegra->ss_clk,
+							tegra->ss_rst);
+		if (rc < 0) {
+			dev_err(dev, "failed to enable XUSB SS partition\n");
+			return rc;
+		}
+
+		rc = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_XUSBC,
+							tegra->host_clk,
+							tegra->host_rst);
+		if (rc < 0) {
+			dev_err(dev, "failed to enable XUSB Host partition\n");
+			tegra_powergate_power_off(TEGRA_POWERGATE_XUSBA);
+			return rc;
+		}
+	}
+
+	return 0;
+}
+
+static int tegra_xusb_powergate_partitions(struct tegra_xusb *tegra)
+{
+	struct device *dev = tegra->dev;
+	int rc;
+
+	if (tegra->use_genpd) {
+		rc = pm_runtime_put_sync(tegra->genpd_dev_host);
+		if (rc < 0) {
+			dev_err(dev, "failed to disable XUSB Host partition\n");
+			return rc;
+		}
+
+		rc = pm_runtime_put_sync(tegra->genpd_dev_ss);
+		if (rc < 0) {
+			dev_err(dev, "failed to disable XUSB SS partition\n");
+			pm_runtime_get_sync(tegra->genpd_dev_host);
+			return rc;
+		}
+	} else {
+		rc = tegra_powergate_power_off(TEGRA_POWERGATE_XUSBC);
+		if (rc < 0) {
+			dev_err(dev, "failed to disable XUSB Host partition\n");
+			return rc;
+		}
+
+		rc = tegra_powergate_power_off(TEGRA_POWERGATE_XUSBA);
+		if (rc < 0) {
+			dev_err(dev, "failed to disable XUSB SS partition\n");
+			tegra_powergate_sequence_power_up(TEGRA_POWERGATE_XUSBC,
+							  tegra->host_clk,
+							  tegra->host_rst);
+			return rc;
+		}
+	}
+
+	return 0;
+}
+
+static int __tegra_xusb_enable_firmware_messages(struct tegra_xusb *tegra)
+{
+	struct tegra_xusb_mbox_msg msg;
+	int err;
+
+	/* Enable firmware messages from controller. */
+	msg.cmd = MBOX_CMD_MSG_ENABLED;
+	msg.data = 0;
+
+	err = tegra_xusb_mbox_send(tegra, &msg);
+	if (err < 0)
+		dev_err(tegra->dev, "failed to enable messages: %d\n", err);
+
+	return err;
+}
+
+static irqreturn_t tegra_xusb_padctl_irq(int irq, void *data)
+{
+	struct tegra_xusb *tegra = data;
+
+	mutex_lock(&tegra->lock);
+
+	if (tegra->suspended) {
+		mutex_unlock(&tegra->lock);
+		return IRQ_HANDLED;
+	}
+
+	mutex_unlock(&tegra->lock);
+
+	pm_runtime_resume(tegra->dev);
+
+	return IRQ_HANDLED;
+}
+
+static int tegra_xusb_enable_firmware_messages(struct tegra_xusb *tegra)
+{
+	int err;
+
+	mutex_lock(&tegra->lock);
+	err = __tegra_xusb_enable_firmware_messages(tegra);
+	mutex_unlock(&tegra->lock);
+
+	return err;
+}
+
+static void tegra_xhci_set_port_power(struct tegra_xusb *tegra, bool main,
+						 bool set)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
+	struct usb_hcd *hcd = main ?  xhci->main_hcd : xhci->shared_hcd;
+	unsigned int wait = (!main && !set) ? 1000 : 10;
+	u16 typeReq = set ? SetPortFeature : ClearPortFeature;
+	u16 wIndex = main ? tegra->otg_usb2_port + 1 : tegra->otg_usb3_port + 1;
+	u32 status;
+	u32 stat_power = main ? USB_PORT_STAT_POWER : USB_SS_PORT_STAT_POWER;
+	u32 status_val = set ? stat_power : 0;
+
+	dev_dbg(tegra->dev, "%s():%s %s port power\n", __func__,
+		set ? "set" : "clear", main ? "HS" : "SS");
+
+	hcd->driver->hub_control(hcd, typeReq, USB_PORT_FEAT_POWER, wIndex,
+				 NULL, 0);
+
+	do {
+		tegra_xhci_hc_driver.hub_control(hcd, GetPortStatus, 0, wIndex,
+					(char *) &status, sizeof(status));
+		if (status_val == (status & stat_power))
+			break;
+
+		if (!main && !set)
+			usleep_range(600, 700);
+		else
+			usleep_range(10, 20);
+	} while (--wait > 0);
+
+	if (status_val != (status & stat_power))
+		dev_info(tegra->dev, "failed to %s %s PP %d\n",
+						set ? "set" : "clear",
+						main ? "HS" : "SS", status);
+}
+
+static struct phy *tegra_xusb_get_phy(struct tegra_xusb *tegra, char *name,
+								int port)
+{
+	unsigned int i, phy_count = 0;
+
+	for (i = 0; i < tegra->soc->num_types; i++) {
+		if (!strncmp(tegra->soc->phy_types[i].name, name,
+							    strlen(name)))
+			return tegra->phys[phy_count+port];
+
+		phy_count += tegra->soc->phy_types[i].num;
+	}
+
+	return NULL;
+}
+
+static void tegra_xhci_id_work(struct work_struct *work)
+{
+	struct tegra_xusb *tegra = container_of(work, struct tegra_xusb,
+						id_work);
+	struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
+	struct tegra_xusb_mbox_msg msg;
+	struct phy *phy = tegra_xusb_get_phy(tegra, "usb2",
+						    tegra->otg_usb2_port);
+	u32 status;
+	int ret;
+
+	dev_dbg(tegra->dev, "host mode %s\n", tegra->host_mode ? "on" : "off");
+
+	mutex_lock(&tegra->lock);
+
+	if (tegra->host_mode)
+		phy_set_mode_ext(phy, PHY_MODE_USB_OTG, USB_ROLE_HOST);
+	else
+		phy_set_mode_ext(phy, PHY_MODE_USB_OTG, USB_ROLE_NONE);
+
+	mutex_unlock(&tegra->lock);
+
+	tegra->otg_usb3_port = tegra_xusb_padctl_get_usb3_companion(tegra->padctl,
+								    tegra->otg_usb2_port);
+
+	if (tegra->host_mode) {
+		/* switch to host mode */
+		if (tegra->otg_usb3_port >= 0) {
+			if (tegra->soc->otg_reset_sspi) {
+				/* set PP=0 */
+				tegra_xhci_hc_driver.hub_control(
+					xhci->shared_hcd, GetPortStatus,
+					0, tegra->otg_usb3_port+1,
+					(char *) &status, sizeof(status));
+				if (status & USB_SS_PORT_STAT_POWER)
+					tegra_xhci_set_port_power(tegra, false,
+								  false);
+
+				/* reset OTG port SSPI */
+				msg.cmd = MBOX_CMD_RESET_SSPI;
+				msg.data = tegra->otg_usb3_port+1;
+
+				ret = tegra_xusb_mbox_send(tegra, &msg);
+				if (ret < 0) {
+					dev_info(tegra->dev,
+						"failed to RESET_SSPI %d\n",
+						ret);
+				}
+			}
+
+			tegra_xhci_set_port_power(tegra, false, true);
+		}
+
+		tegra_xhci_set_port_power(tegra, true, true);
+
+	} else {
+		if (tegra->otg_usb3_port >= 0)
+			tegra_xhci_set_port_power(tegra, false, false);
+
+		tegra_xhci_set_port_power(tegra, true, false);
+	}
+}
+
+#if IS_ENABLED(CONFIG_PM) || IS_ENABLED(CONFIG_PM_SLEEP)
+static bool is_usb2_otg_phy(struct tegra_xusb *tegra, unsigned int index)
+{
+	return (tegra->usbphy[index] != NULL);
+}
+
+static bool is_usb3_otg_phy(struct tegra_xusb *tegra, unsigned int index)
+{
+	struct tegra_xusb_padctl *padctl = tegra->padctl;
+	unsigned int i;
+	int port;
+
+	for (i = 0; i < tegra->num_usb_phys; i++) {
+		if (is_usb2_otg_phy(tegra, i)) {
+			port = tegra_xusb_padctl_get_usb3_companion(padctl, i);
+			if ((port >= 0) && (index == (unsigned int)port))
+				return true;
+		}
+	}
+
+	return false;
+}
+
+static bool is_host_mode_phy(struct tegra_xusb *tegra, unsigned int phy_type, unsigned int index)
+{
+	if (strcmp(tegra->soc->phy_types[phy_type].name, "hsic") == 0)
+		return true;
+
+	if (strcmp(tegra->soc->phy_types[phy_type].name, "usb2") == 0) {
+		if (is_usb2_otg_phy(tegra, index))
+			return ((index == tegra->otg_usb2_port) && tegra->host_mode);
+		else
+			return true;
+	}
+
+	if (strcmp(tegra->soc->phy_types[phy_type].name, "usb3") == 0) {
+		if (is_usb3_otg_phy(tegra, index))
+			return ((index == tegra->otg_usb3_port) && tegra->host_mode);
+		else
+			return true;
+	}
+
+	return false;
+}
+#endif
+
+static int tegra_xusb_get_usb2_port(struct tegra_xusb *tegra,
+					      struct usb_phy *usbphy)
+{
+	unsigned int i;
+
+	for (i = 0; i < tegra->num_usb_phys; i++) {
+		if (tegra->usbphy[i] && usbphy == tegra->usbphy[i])
+			return i;
+	}
+
+	return -1;
+}
+
+static int tegra_xhci_id_notify(struct notifier_block *nb,
+					 unsigned long action, void *data)
+{
+	struct tegra_xusb *tegra = container_of(nb, struct tegra_xusb,
+						    id_nb);
+	struct usb_phy *usbphy = (struct usb_phy *)data;
+
+	dev_dbg(tegra->dev, "%s(): action is %d", __func__, usbphy->last_event);
+
+	if ((tegra->host_mode && usbphy->last_event == USB_EVENT_ID) ||
+		(!tegra->host_mode && usbphy->last_event != USB_EVENT_ID)) {
+		dev_dbg(tegra->dev, "Same role(%d) received. Ignore",
+			tegra->host_mode);
+		return NOTIFY_OK;
+	}
+
+	tegra->otg_usb2_port = tegra_xusb_get_usb2_port(tegra, usbphy);
+
+	tegra->host_mode = (usbphy->last_event == USB_EVENT_ID) ? true : false;
+
+	schedule_work(&tegra->id_work);
+
+	return NOTIFY_OK;
+}
+
+static int tegra_xusb_init_usb_phy(struct tegra_xusb *tegra)
+{
+	unsigned int i;
+
+	tegra->usbphy = devm_kcalloc(tegra->dev, tegra->num_usb_phys,
+				   sizeof(*tegra->usbphy), GFP_KERNEL);
+	if (!tegra->usbphy)
+		return -ENOMEM;
+
+	INIT_WORK(&tegra->id_work, tegra_xhci_id_work);
+	tegra->id_nb.notifier_call = tegra_xhci_id_notify;
+	tegra->otg_usb2_port = -EINVAL;
+	tegra->otg_usb3_port = -EINVAL;
+
+	for (i = 0; i < tegra->num_usb_phys; i++) {
+		struct phy *phy = tegra_xusb_get_phy(tegra, "usb2", i);
+
+		if (!phy)
+			continue;
+
+		tegra->usbphy[i] = devm_usb_get_phy_by_node(tegra->dev,
+							phy->dev.of_node,
+							&tegra->id_nb);
+		if (!IS_ERR(tegra->usbphy[i])) {
+			dev_dbg(tegra->dev, "usbphy-%d registered", i);
+			otg_set_host(tegra->usbphy[i]->otg, &tegra->hcd->self);
+		} else {
+			/*
+			 * usb-phy is optional, continue if its not available.
+			 */
+			tegra->usbphy[i] = NULL;
+		}
+	}
+
+	return 0;
+}
+
+static void tegra_xusb_deinit_usb_phy(struct tegra_xusb *tegra)
+{
+	unsigned int i;
+
+	cancel_work_sync(&tegra->id_work);
+
+	for (i = 0; i < tegra->num_usb_phys; i++)
+		if (tegra->usbphy[i])
+			otg_set_host(tegra->usbphy[i]->otg, NULL);
+}
+
+static int tegra_xusb_probe(struct platform_device *pdev)
+{
+	struct of_phandle_args args;
+	struct tegra_xusb *tegra;
+	struct device_node *np;
+	struct resource *regs;
+	struct xhci_hcd *xhci;
+	unsigned int i, j, k;
+	struct phy *phy;
+	int err;
+
+	BUILD_BUG_ON(sizeof(struct tegra_xusb_fw_header) != 256);
+
+	tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
+	if (!tegra)
+		return -ENOMEM;
+
+	tegra->soc = of_device_get_match_data(&pdev->dev);
+	mutex_init(&tegra->lock);
+	tegra->dev = &pdev->dev;
+
+	err = tegra_xusb_init_context(tegra);
+	if (err < 0)
+		return err;
+
+	tegra->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &regs);
+	if (IS_ERR(tegra->regs))
+		return PTR_ERR(tegra->regs);
+
+	tegra->fpci_base = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(tegra->fpci_base))
+		return PTR_ERR(tegra->fpci_base);
+
+	if (tegra->soc->has_ipfs) {
+		tegra->ipfs_base = devm_platform_ioremap_resource(pdev, 2);
+		if (IS_ERR(tegra->ipfs_base))
+			return PTR_ERR(tegra->ipfs_base);
+	}
+
+	tegra->xhci_irq = platform_get_irq(pdev, 0);
+	if (tegra->xhci_irq < 0)
+		return tegra->xhci_irq;
+
+	tegra->mbox_irq = platform_get_irq(pdev, 1);
+	if (tegra->mbox_irq < 0)
+		return tegra->mbox_irq;
+
+	tegra->padctl = tegra_xusb_padctl_get(&pdev->dev);
+	if (IS_ERR(tegra->padctl))
+		return PTR_ERR(tegra->padctl);
+
+	np = of_parse_phandle(pdev->dev.of_node, "nvidia,xusb-padctl", 0);
+	if (!np) {
+		err = -ENODEV;
+		goto put_padctl;
+	}
+
+	/* Older device-trees don't have padctrl interrupt */
+	err = of_irq_parse_one(np, 0, &args);
+	if (!err) {
+		tegra->padctl_irq = of_irq_get(np, 0);
+		if (tegra->padctl_irq <= 0) {
+			err = (tegra->padctl_irq == 0) ? -ENODEV : tegra->padctl_irq;
+			goto put_padctl;
+		}
+	} else {
+		dev_dbg(&pdev->dev,
+			"%pOF is missing an interrupt, disabling PM support\n", np);
+	}
+
+	tegra->host_clk = devm_clk_get(&pdev->dev, "xusb_host");
+	if (IS_ERR(tegra->host_clk)) {
+		err = PTR_ERR(tegra->host_clk);
+		dev_err(&pdev->dev, "failed to get xusb_host: %d\n", err);
+		goto put_padctl;
+	}
+
+	tegra->falcon_clk = devm_clk_get(&pdev->dev, "xusb_falcon_src");
+	if (IS_ERR(tegra->falcon_clk)) {
+		err = PTR_ERR(tegra->falcon_clk);
+		dev_err(&pdev->dev, "failed to get xusb_falcon_src: %d\n", err);
+		goto put_padctl;
+	}
+
+	tegra->ss_clk = devm_clk_get(&pdev->dev, "xusb_ss");
+	if (IS_ERR(tegra->ss_clk)) {
+		err = PTR_ERR(tegra->ss_clk);
+		dev_err(&pdev->dev, "failed to get xusb_ss: %d\n", err);
+		goto put_padctl;
+	}
+
+	tegra->ss_src_clk = devm_clk_get(&pdev->dev, "xusb_ss_src");
+	if (IS_ERR(tegra->ss_src_clk)) {
+		err = PTR_ERR(tegra->ss_src_clk);
+		dev_err(&pdev->dev, "failed to get xusb_ss_src: %d\n", err);
+		goto put_padctl;
+	}
+
+	tegra->hs_src_clk = devm_clk_get(&pdev->dev, "xusb_hs_src");
+	if (IS_ERR(tegra->hs_src_clk)) {
+		err = PTR_ERR(tegra->hs_src_clk);
+		dev_err(&pdev->dev, "failed to get xusb_hs_src: %d\n", err);
+		goto put_padctl;
+	}
+
+	tegra->fs_src_clk = devm_clk_get(&pdev->dev, "xusb_fs_src");
+	if (IS_ERR(tegra->fs_src_clk)) {
+		err = PTR_ERR(tegra->fs_src_clk);
+		dev_err(&pdev->dev, "failed to get xusb_fs_src: %d\n", err);
+		goto put_padctl;
+	}
+
+	tegra->pll_u_480m = devm_clk_get(&pdev->dev, "pll_u_480m");
+	if (IS_ERR(tegra->pll_u_480m)) {
+		err = PTR_ERR(tegra->pll_u_480m);
+		dev_err(&pdev->dev, "failed to get pll_u_480m: %d\n", err);
+		goto put_padctl;
+	}
+
+	tegra->clk_m = devm_clk_get(&pdev->dev, "clk_m");
+	if (IS_ERR(tegra->clk_m)) {
+		err = PTR_ERR(tegra->clk_m);
+		dev_err(&pdev->dev, "failed to get clk_m: %d\n", err);
+		goto put_padctl;
+	}
+
+	tegra->pll_e = devm_clk_get(&pdev->dev, "pll_e");
+	if (IS_ERR(tegra->pll_e)) {
+		err = PTR_ERR(tegra->pll_e);
+		dev_err(&pdev->dev, "failed to get pll_e: %d\n", err);
+		goto put_padctl;
+	}
+
+	if (!of_property_read_bool(pdev->dev.of_node, "power-domains")) {
+		tegra->host_rst = devm_reset_control_get(&pdev->dev,
+							 "xusb_host");
+		if (IS_ERR(tegra->host_rst)) {
+			err = PTR_ERR(tegra->host_rst);
+			dev_err(&pdev->dev,
+				"failed to get xusb_host reset: %d\n", err);
+			goto put_padctl;
+		}
+
+		tegra->ss_rst = devm_reset_control_get(&pdev->dev, "xusb_ss");
+		if (IS_ERR(tegra->ss_rst)) {
+			err = PTR_ERR(tegra->ss_rst);
+			dev_err(&pdev->dev, "failed to get xusb_ss reset: %d\n",
+				err);
+			goto put_padctl;
+		}
+	} else {
+		err = tegra_xusb_powerdomain_init(&pdev->dev, tegra);
+		if (err)
+			goto put_powerdomains;
+	}
+
+	tegra->supplies = devm_kcalloc(&pdev->dev, tegra->soc->num_supplies,
+				       sizeof(*tegra->supplies), GFP_KERNEL);
+	if (!tegra->supplies) {
+		err = -ENOMEM;
+		goto put_powerdomains;
+	}
+
+	regulator_bulk_set_supply_names(tegra->supplies,
+					tegra->soc->supply_names,
+					tegra->soc->num_supplies);
+
+	err = devm_regulator_bulk_get(&pdev->dev, tegra->soc->num_supplies,
+				      tegra->supplies);
+	if (err) {
+		dev_err(&pdev->dev, "failed to get regulators: %d\n", err);
+		goto put_powerdomains;
+	}
+
+	for (i = 0; i < tegra->soc->num_types; i++) {
+		if (!strncmp(tegra->soc->phy_types[i].name, "usb2", 4))
+			tegra->num_usb_phys = tegra->soc->phy_types[i].num;
+		tegra->num_phys += tegra->soc->phy_types[i].num;
+	}
+
+	tegra->phys = devm_kcalloc(&pdev->dev, tegra->num_phys,
+				   sizeof(*tegra->phys), GFP_KERNEL);
+	if (!tegra->phys) {
+		err = -ENOMEM;
+		goto put_powerdomains;
+	}
+
+	for (i = 0, k = 0; i < tegra->soc->num_types; i++) {
+		char prop[8];
+
+		for (j = 0; j < tegra->soc->phy_types[i].num; j++) {
+			snprintf(prop, sizeof(prop), "%s-%d",
+				 tegra->soc->phy_types[i].name, j);
+
+			phy = devm_phy_optional_get(&pdev->dev, prop);
+			if (IS_ERR(phy)) {
+				dev_err(&pdev->dev,
+					"failed to get PHY %s: %ld\n", prop,
+					PTR_ERR(phy));
+				err = PTR_ERR(phy);
+				goto put_powerdomains;
+			}
+
+			tegra->phys[k++] = phy;
+		}
+	}
+
+	tegra->hcd = usb_create_hcd(&tegra_xhci_hc_driver, &pdev->dev,
+				    dev_name(&pdev->dev));
+	if (!tegra->hcd) {
+		err = -ENOMEM;
+		goto put_powerdomains;
+	}
+
+	tegra->hcd->skip_phy_initialization = 1;
+	tegra->hcd->regs = tegra->regs;
+	tegra->hcd->rsrc_start = regs->start;
+	tegra->hcd->rsrc_len = resource_size(regs);
+
+	/*
+	 * This must happen after usb_create_hcd(), because usb_create_hcd()
+	 * will overwrite the drvdata of the device with the hcd it creates.
+	 */
+	platform_set_drvdata(pdev, tegra);
+
+	err = tegra_xusb_clk_enable(tegra);
+	if (err) {
+		dev_err(tegra->dev, "failed to enable clocks: %d\n", err);
+		goto put_hcd;
+	}
+
+	err = regulator_bulk_enable(tegra->soc->num_supplies, tegra->supplies);
+	if (err) {
+		dev_err(tegra->dev, "failed to enable regulators: %d\n", err);
+		goto disable_clk;
+	}
+
+	err = tegra_xusb_phy_enable(tegra);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to enable PHYs: %d\n", err);
+		goto disable_regulator;
+	}
+
+	/*
+	 * The XUSB Falcon microcontroller can only address 40 bits, so set
+	 * the DMA mask accordingly.
+	 */
+	err = dma_set_mask_and_coherent(tegra->dev, DMA_BIT_MASK(40));
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to set DMA mask: %d\n", err);
+		goto disable_phy;
+	}
+
+	err = tegra_xusb_request_firmware(tegra);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to request firmware: %d\n", err);
+		goto disable_phy;
+	}
+
+	err = tegra_xusb_unpowergate_partitions(tegra);
+	if (err)
+		goto free_firmware;
+
+	tegra_xusb_config(tegra);
+
+	err = tegra_xusb_load_firmware(tegra);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to load firmware: %d\n", err);
+		goto powergate;
+	}
+
+	err = usb_add_hcd(tegra->hcd, tegra->xhci_irq, IRQF_SHARED);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to add USB HCD: %d\n", err);
+		goto powergate;
+	}
+
+	device_wakeup_enable(tegra->hcd->self.controller);
+
+	xhci = hcd_to_xhci(tegra->hcd);
+
+	xhci->shared_hcd = usb_create_shared_hcd(&tegra_xhci_hc_driver,
+						 &pdev->dev,
+						 dev_name(&pdev->dev),
+						 tegra->hcd);
+	if (!xhci->shared_hcd) {
+		dev_err(&pdev->dev, "failed to create shared HCD\n");
+		err = -ENOMEM;
+		goto remove_usb2;
+	}
+
+	err = usb_add_hcd(xhci->shared_hcd, tegra->xhci_irq, IRQF_SHARED);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to add shared HCD: %d\n", err);
+		goto put_usb3;
+	}
+
+	err = devm_request_threaded_irq(&pdev->dev, tegra->mbox_irq,
+					tegra_xusb_mbox_irq,
+					tegra_xusb_mbox_thread, 0,
+					dev_name(&pdev->dev), tegra);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to request IRQ: %d\n", err);
+		goto remove_usb3;
+	}
+
+	if (tegra->padctl_irq) {
+		err = devm_request_threaded_irq(&pdev->dev, tegra->padctl_irq,
+						NULL, tegra_xusb_padctl_irq,
+						IRQF_ONESHOT, dev_name(&pdev->dev),
+						tegra);
+		if (err < 0) {
+			dev_err(&pdev->dev, "failed to request padctl IRQ: %d\n", err);
+			goto remove_usb3;
+		}
+	}
+
+	err = tegra_xusb_enable_firmware_messages(tegra);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to enable messages: %d\n", err);
+		goto remove_usb3;
+	}
+
+	err = tegra_xusb_init_usb_phy(tegra);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to init USB PHY: %d\n", err);
+		goto remove_usb3;
+	}
+
+	/* Enable wake for both USB 2.0 and USB 3.0 roothubs */
+	device_init_wakeup(&tegra->hcd->self.root_hub->dev, true);
+	device_init_wakeup(&xhci->shared_hcd->self.root_hub->dev, true);
+
+	pm_runtime_use_autosuspend(tegra->dev);
+	pm_runtime_set_autosuspend_delay(tegra->dev, 2000);
+	pm_runtime_mark_last_busy(tegra->dev);
+	pm_runtime_set_active(tegra->dev);
+
+	if (tegra->padctl_irq) {
+		device_init_wakeup(tegra->dev, true);
+		pm_runtime_enable(tegra->dev);
+	}
+
+	return 0;
+
+remove_usb3:
+	usb_remove_hcd(xhci->shared_hcd);
+put_usb3:
+	usb_put_hcd(xhci->shared_hcd);
+remove_usb2:
+	usb_remove_hcd(tegra->hcd);
+powergate:
+	tegra_xusb_powergate_partitions(tegra);
+free_firmware:
+	dma_free_coherent(&pdev->dev, tegra->fw.size, tegra->fw.virt,
+			  tegra->fw.phys);
+disable_phy:
+	tegra_xusb_phy_disable(tegra);
+disable_regulator:
+	regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
+disable_clk:
+	tegra_xusb_clk_disable(tegra);
+put_hcd:
+	usb_put_hcd(tegra->hcd);
+put_powerdomains:
+	tegra_xusb_powerdomain_remove(&pdev->dev, tegra);
+put_padctl:
+	of_node_put(np);
+	tegra_xusb_padctl_put(tegra->padctl);
+	return err;
+}
+
+static int tegra_xusb_remove(struct platform_device *pdev)
+{
+	struct tegra_xusb *tegra = platform_get_drvdata(pdev);
+	struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
+
+	tegra_xusb_deinit_usb_phy(tegra);
+
+	pm_runtime_get_sync(&pdev->dev);
+	usb_remove_hcd(xhci->shared_hcd);
+	usb_put_hcd(xhci->shared_hcd);
+	xhci->shared_hcd = NULL;
+	usb_remove_hcd(tegra->hcd);
+	usb_put_hcd(tegra->hcd);
+
+	dma_free_coherent(&pdev->dev, tegra->fw.size, tegra->fw.virt,
+			  tegra->fw.phys);
+
+	if (tegra->padctl_irq)
+		pm_runtime_disable(&pdev->dev);
+
+	pm_runtime_put(&pdev->dev);
+
+	tegra_xusb_powergate_partitions(tegra);
+
+	tegra_xusb_powerdomain_remove(&pdev->dev, tegra);
+
+	tegra_xusb_phy_disable(tegra);
+	tegra_xusb_clk_disable(tegra);
+	regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
+	tegra_xusb_padctl_put(tegra->padctl);
+
+	return 0;
+}
+
+static bool xhci_hub_ports_suspended(struct xhci_hub *hub)
+{
+	struct device *dev = hub->hcd->self.controller;
+	bool status = true;
+	unsigned int i;
+	u32 value;
+
+	for (i = 0; i < hub->num_ports; i++) {
+		value = readl(hub->ports[i]->addr);
+		if ((value & PORT_PE) == 0)
+			continue;
+
+		if ((value & PORT_PLS_MASK) != XDEV_U3) {
+			dev_info(dev, "%u-%u isn't suspended: %#010x\n",
+				 hub->hcd->self.busnum, i + 1, value);
+			status = false;
+		}
+	}
+
+	return status;
+}
+
+static int tegra_xusb_check_ports(struct tegra_xusb *tegra)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
+	struct xhci_bus_state *bus_state = &xhci->usb2_rhub.bus_state;
+	unsigned long flags;
+	int err = 0;
+
+	if (bus_state->bus_suspended) {
+		/* xusb_hub_suspend() has just directed one or more USB2 port(s)
+		 * to U3 state, it takes 3ms to enter U3.
+		 */
+		usleep_range(3000, 4000);
+	}
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	if (!xhci_hub_ports_suspended(&xhci->usb2_rhub) ||
+	    !xhci_hub_ports_suspended(&xhci->usb3_rhub))
+		err = -EBUSY;
+
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	return err;
+}
+
+static void tegra_xusb_save_context(struct tegra_xusb *tegra)
+{
+	const struct tegra_xusb_context_soc *soc = tegra->soc->context;
+	struct tegra_xusb_context *ctx = &tegra->context;
+	unsigned int i;
+
+	if (soc->ipfs.num_offsets > 0) {
+		for (i = 0; i < soc->ipfs.num_offsets; i++)
+			ctx->ipfs[i] = ipfs_readl(tegra, soc->ipfs.offsets[i]);
+	}
+
+	if (soc->fpci.num_offsets > 0) {
+		for (i = 0; i < soc->fpci.num_offsets; i++)
+			ctx->fpci[i] = fpci_readl(tegra, soc->fpci.offsets[i]);
+	}
+}
+
+static void tegra_xusb_restore_context(struct tegra_xusb *tegra)
+{
+	const struct tegra_xusb_context_soc *soc = tegra->soc->context;
+	struct tegra_xusb_context *ctx = &tegra->context;
+	unsigned int i;
+
+	if (soc->fpci.num_offsets > 0) {
+		for (i = 0; i < soc->fpci.num_offsets; i++)
+			fpci_writel(tegra, ctx->fpci[i], soc->fpci.offsets[i]);
+	}
+
+	if (soc->ipfs.num_offsets > 0) {
+		for (i = 0; i < soc->ipfs.num_offsets; i++)
+			ipfs_writel(tegra, ctx->ipfs[i], soc->ipfs.offsets[i]);
+	}
+}
+
+static enum usb_device_speed tegra_xhci_portsc_to_speed(struct tegra_xusb *tegra, u32 portsc)
+{
+	if (DEV_LOWSPEED(portsc))
+		return USB_SPEED_LOW;
+
+	if (DEV_HIGHSPEED(portsc))
+		return USB_SPEED_HIGH;
+
+	if (DEV_FULLSPEED(portsc))
+		return USB_SPEED_FULL;
+
+	if (DEV_SUPERSPEED_ANY(portsc))
+		return USB_SPEED_SUPER;
+
+	return USB_SPEED_UNKNOWN;
+}
+
+static void tegra_xhci_enable_phy_sleepwalk_wake(struct tegra_xusb *tegra)
+{
+	struct tegra_xusb_padctl *padctl = tegra->padctl;
+	struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
+	enum usb_device_speed speed;
+	struct phy *phy;
+	unsigned int index, offset;
+	unsigned int i, j, k;
+	struct xhci_hub *rhub;
+	u32 portsc;
+
+	for (i = 0, k = 0; i < tegra->soc->num_types; i++) {
+		if (strcmp(tegra->soc->phy_types[i].name, "usb3") == 0)
+			rhub = &xhci->usb3_rhub;
+		else
+			rhub = &xhci->usb2_rhub;
+
+		if (strcmp(tegra->soc->phy_types[i].name, "hsic") == 0)
+			offset = tegra->soc->ports.usb2.count;
+		else
+			offset = 0;
+
+		for (j = 0; j < tegra->soc->phy_types[i].num; j++) {
+			phy = tegra->phys[k++];
+
+			if (!phy)
+				continue;
+
+			index = j + offset;
+
+			if (index >= rhub->num_ports)
+				continue;
+
+			if (!is_host_mode_phy(tegra, i, j))
+				continue;
+
+			portsc = readl(rhub->ports[index]->addr);
+			speed = tegra_xhci_portsc_to_speed(tegra, portsc);
+			tegra_xusb_padctl_enable_phy_sleepwalk(padctl, phy, speed);
+			tegra_xusb_padctl_enable_phy_wake(padctl, phy);
+		}
+	}
+}
+
+static void tegra_xhci_disable_phy_wake(struct tegra_xusb *tegra)
+{
+	struct tegra_xusb_padctl *padctl = tegra->padctl;
+	unsigned int i;
+
+	for (i = 0; i < tegra->num_phys; i++) {
+		if (!tegra->phys[i])
+			continue;
+
+		tegra_xusb_padctl_disable_phy_wake(padctl, tegra->phys[i]);
+	}
+}
+
+static void tegra_xhci_disable_phy_sleepwalk(struct tegra_xusb *tegra)
+{
+	struct tegra_xusb_padctl *padctl = tegra->padctl;
+	unsigned int i;
+
+	for (i = 0; i < tegra->num_phys; i++) {
+		if (!tegra->phys[i])
+			continue;
+
+		tegra_xusb_padctl_disable_phy_sleepwalk(padctl, tegra->phys[i]);
+	}
+}
+
+static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool runtime)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
+	struct device *dev = tegra->dev;
+	bool wakeup = runtime ? true : device_may_wakeup(dev);
+	unsigned int i;
+	int err;
+	u32 usbcmd;
+
+	dev_dbg(dev, "entering ELPG\n");
+
+	usbcmd = readl(&xhci->op_regs->command);
+	usbcmd &= ~CMD_EIE;
+	writel(usbcmd, &xhci->op_regs->command);
+
+	err = tegra_xusb_check_ports(tegra);
+	if (err < 0) {
+		dev_err(tegra->dev, "not all ports suspended: %d\n", err);
+		goto out;
+	}
+
+	err = xhci_suspend(xhci, wakeup);
+	if (err < 0) {
+		dev_err(tegra->dev, "failed to suspend XHCI: %d\n", err);
+		goto out;
+	}
+
+	tegra_xusb_save_context(tegra);
+
+	if (wakeup)
+		tegra_xhci_enable_phy_sleepwalk_wake(tegra);
+
+	tegra_xusb_powergate_partitions(tegra);
+
+	for (i = 0; i < tegra->num_phys; i++) {
+		if (!tegra->phys[i])
+			continue;
+
+		phy_power_off(tegra->phys[i]);
+		if (!wakeup)
+			phy_exit(tegra->phys[i]);
+	}
+
+	tegra_xusb_clk_disable(tegra);
+
+out:
+	if (!err)
+		dev_dbg(tegra->dev, "entering ELPG done\n");
+	else {
+		usbcmd = readl(&xhci->op_regs->command);
+		usbcmd |= CMD_EIE;
+		writel(usbcmd, &xhci->op_regs->command);
+
+		dev_dbg(tegra->dev, "entering ELPG failed\n");
+		pm_runtime_mark_last_busy(tegra->dev);
+	}
+
+	return err;
+}
+
+static int tegra_xusb_exit_elpg(struct tegra_xusb *tegra, bool runtime)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
+	struct device *dev = tegra->dev;
+	bool wakeup = runtime ? true : device_may_wakeup(dev);
+	unsigned int i;
+	u32 usbcmd;
+	int err;
+
+	dev_dbg(dev, "exiting ELPG\n");
+	pm_runtime_mark_last_busy(tegra->dev);
+
+	err = tegra_xusb_clk_enable(tegra);
+	if (err < 0) {
+		dev_err(tegra->dev, "failed to enable clocks: %d\n", err);
+		goto out;
+	}
+
+	err = tegra_xusb_unpowergate_partitions(tegra);
+	if (err)
+		goto disable_clks;
+
+	if (wakeup)
+		tegra_xhci_disable_phy_wake(tegra);
+
+	for (i = 0; i < tegra->num_phys; i++) {
+		if (!tegra->phys[i])
+			continue;
+
+		if (!wakeup)
+			phy_init(tegra->phys[i]);
+
+		phy_power_on(tegra->phys[i]);
+	}
+
+	tegra_xusb_config(tegra);
+	tegra_xusb_restore_context(tegra);
+
+	err = tegra_xusb_load_firmware(tegra);
+	if (err < 0) {
+		dev_err(tegra->dev, "failed to load firmware: %d\n", err);
+		goto disable_phy;
+	}
+
+	err = __tegra_xusb_enable_firmware_messages(tegra);
+	if (err < 0) {
+		dev_err(tegra->dev, "failed to enable messages: %d\n", err);
+		goto disable_phy;
+	}
+
+	if (wakeup)
+		tegra_xhci_disable_phy_sleepwalk(tegra);
+
+	err = xhci_resume(xhci, 0);
+	if (err < 0) {
+		dev_err(tegra->dev, "failed to resume XHCI: %d\n", err);
+		goto disable_phy;
+	}
+
+	usbcmd = readl(&xhci->op_regs->command);
+	usbcmd |= CMD_EIE;
+	writel(usbcmd, &xhci->op_regs->command);
+
+	goto out;
+
+disable_phy:
+	for (i = 0; i < tegra->num_phys; i++) {
+		if (!tegra->phys[i])
+			continue;
+
+		phy_power_off(tegra->phys[i]);
+		if (!wakeup)
+			phy_exit(tegra->phys[i]);
+	}
+	tegra_xusb_powergate_partitions(tegra);
+disable_clks:
+	tegra_xusb_clk_disable(tegra);
+out:
+	if (!err)
+		dev_dbg(dev, "exiting ELPG done\n");
+	else
+		dev_dbg(dev, "exiting ELPG failed\n");
+
+	return err;
+}
+
+static __maybe_unused int tegra_xusb_suspend(struct device *dev)
+{
+	struct tegra_xusb *tegra = dev_get_drvdata(dev);
+	int err;
+
+	synchronize_irq(tegra->mbox_irq);
+
+	mutex_lock(&tegra->lock);
+
+	if (pm_runtime_suspended(dev)) {
+		err = tegra_xusb_exit_elpg(tegra, true);
+		if (err < 0)
+			goto out;
+	}
+
+	err = tegra_xusb_enter_elpg(tegra, false);
+	if (err < 0) {
+		if (pm_runtime_suspended(dev)) {
+			pm_runtime_disable(dev);
+			pm_runtime_set_active(dev);
+			pm_runtime_enable(dev);
+		}
+
+		goto out;
+	}
+
+out:
+	if (!err) {
+		tegra->suspended = true;
+		pm_runtime_disable(dev);
+
+		if (device_may_wakeup(dev)) {
+			if (enable_irq_wake(tegra->padctl_irq))
+				dev_err(dev, "failed to enable padctl wakes\n");
+		}
+	}
+
+	mutex_unlock(&tegra->lock);
+
+	return err;
+}
+
+static __maybe_unused int tegra_xusb_resume(struct device *dev)
+{
+	struct tegra_xusb *tegra = dev_get_drvdata(dev);
+	int err;
+
+	mutex_lock(&tegra->lock);
+
+	if (!tegra->suspended) {
+		mutex_unlock(&tegra->lock);
+		return 0;
+	}
+
+	err = tegra_xusb_exit_elpg(tegra, false);
+	if (err < 0) {
+		mutex_unlock(&tegra->lock);
+		return err;
+	}
+
+	if (device_may_wakeup(dev)) {
+		if (disable_irq_wake(tegra->padctl_irq))
+			dev_err(dev, "failed to disable padctl wakes\n");
+	}
+	tegra->suspended = false;
+	mutex_unlock(&tegra->lock);
+
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static __maybe_unused int tegra_xusb_runtime_suspend(struct device *dev)
+{
+	struct tegra_xusb *tegra = dev_get_drvdata(dev);
+	int ret;
+
+	synchronize_irq(tegra->mbox_irq);
+	mutex_lock(&tegra->lock);
+	ret = tegra_xusb_enter_elpg(tegra, true);
+	mutex_unlock(&tegra->lock);
+
+	return ret;
+}
+
+static __maybe_unused int tegra_xusb_runtime_resume(struct device *dev)
+{
+	struct tegra_xusb *tegra = dev_get_drvdata(dev);
+	int err;
+
+	mutex_lock(&tegra->lock);
+	err = tegra_xusb_exit_elpg(tegra, true);
+	mutex_unlock(&tegra->lock);
+
+	return err;
+}
+
+static const struct dev_pm_ops tegra_xusb_pm_ops = {
+	SET_RUNTIME_PM_OPS(tegra_xusb_runtime_suspend,
+			   tegra_xusb_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(tegra_xusb_suspend, tegra_xusb_resume)
+};
+
+static const char * const tegra124_supply_names[] = {
+	"avddio-pex",
+	"dvddio-pex",
+	"avdd-usb",
+	"hvdd-usb-ss",
+};
+
+static const struct tegra_xusb_phy_type tegra124_phy_types[] = {
+	{ .name = "usb3", .num = 2, },
+	{ .name = "usb2", .num = 3, },
+	{ .name = "hsic", .num = 2, },
+};
+
+static const unsigned int tegra124_xusb_context_ipfs[] = {
+	IPFS_XUSB_HOST_MSI_BAR_SZ_0,
+	IPFS_XUSB_HOST_MSI_AXI_BAR_ST_0,
+	IPFS_XUSB_HOST_MSI_FPCI_BAR_ST_0,
+	IPFS_XUSB_HOST_MSI_VEC0_0,
+	IPFS_XUSB_HOST_MSI_EN_VEC0_0,
+	IPFS_XUSB_HOST_FPCI_ERROR_MASKS_0,
+	IPFS_XUSB_HOST_INTR_MASK_0,
+	IPFS_XUSB_HOST_INTR_ENABLE_0,
+	IPFS_XUSB_HOST_UFPCI_CONFIG_0,
+	IPFS_XUSB_HOST_CLKGATE_HYSTERESIS_0,
+	IPFS_XUSB_HOST_MCCIF_FIFOCTRL_0,
+};
+
+static const unsigned int tegra124_xusb_context_fpci[] = {
+	XUSB_CFG_ARU_CONTEXT_HS_PLS,
+	XUSB_CFG_ARU_CONTEXT_FS_PLS,
+	XUSB_CFG_ARU_CONTEXT_HSFS_SPEED,
+	XUSB_CFG_ARU_CONTEXT_HSFS_PP,
+	XUSB_CFG_ARU_CONTEXT,
+	XUSB_CFG_AXI_CFG,
+	XUSB_CFG_24,
+	XUSB_CFG_16,
+};
+
+static const struct tegra_xusb_context_soc tegra124_xusb_context = {
+	.ipfs = {
+		.num_offsets = ARRAY_SIZE(tegra124_xusb_context_ipfs),
+		.offsets = tegra124_xusb_context_ipfs,
+	},
+	.fpci = {
+		.num_offsets = ARRAY_SIZE(tegra124_xusb_context_fpci),
+		.offsets = tegra124_xusb_context_fpci,
+	},
+};
+
+static const struct tegra_xusb_soc tegra124_soc = {
+	.firmware = "nvidia/tegra124/xusb.bin",
+	.supply_names = tegra124_supply_names,
+	.num_supplies = ARRAY_SIZE(tegra124_supply_names),
+	.phy_types = tegra124_phy_types,
+	.num_types = ARRAY_SIZE(tegra124_phy_types),
+	.context = &tegra124_xusb_context,
+	.ports = {
+		.usb2 = { .offset = 4, .count = 4, },
+		.hsic = { .offset = 6, .count = 2, },
+		.usb3 = { .offset = 0, .count = 2, },
+	},
+	.scale_ss_clock = true,
+	.has_ipfs = true,
+	.otg_reset_sspi = false,
+	.mbox = {
+		.cmd = 0xe4,
+		.data_in = 0xe8,
+		.data_out = 0xec,
+		.owner = 0xf0,
+	},
+};
+MODULE_FIRMWARE("nvidia/tegra124/xusb.bin");
+
+static const char * const tegra210_supply_names[] = {
+	"dvddio-pex",
+	"hvddio-pex",
+	"avdd-usb",
+};
+
+static const struct tegra_xusb_phy_type tegra210_phy_types[] = {
+	{ .name = "usb3", .num = 4, },
+	{ .name = "usb2", .num = 4, },
+	{ .name = "hsic", .num = 1, },
+};
+
+static const struct tegra_xusb_soc tegra210_soc = {
+	.firmware = "nvidia/tegra210/xusb.bin",
+	.supply_names = tegra210_supply_names,
+	.num_supplies = ARRAY_SIZE(tegra210_supply_names),
+	.phy_types = tegra210_phy_types,
+	.num_types = ARRAY_SIZE(tegra210_phy_types),
+	.context = &tegra124_xusb_context,
+	.ports = {
+		.usb2 = { .offset = 4, .count = 4, },
+		.hsic = { .offset = 8, .count = 1, },
+		.usb3 = { .offset = 0, .count = 4, },
+	},
+	.scale_ss_clock = false,
+	.has_ipfs = true,
+	.otg_reset_sspi = true,
+	.mbox = {
+		.cmd = 0xe4,
+		.data_in = 0xe8,
+		.data_out = 0xec,
+		.owner = 0xf0,
+	},
+};
+MODULE_FIRMWARE("nvidia/tegra210/xusb.bin");
+
+static const char * const tegra186_supply_names[] = {
+};
+MODULE_FIRMWARE("nvidia/tegra186/xusb.bin");
+
+static const struct tegra_xusb_phy_type tegra186_phy_types[] = {
+	{ .name = "usb3", .num = 3, },
+	{ .name = "usb2", .num = 3, },
+	{ .name = "hsic", .num = 1, },
+};
+
+static const struct tegra_xusb_context_soc tegra186_xusb_context = {
+	.fpci = {
+		.num_offsets = ARRAY_SIZE(tegra124_xusb_context_fpci),
+		.offsets = tegra124_xusb_context_fpci,
+	},
+};
+
+static const struct tegra_xusb_soc tegra186_soc = {
+	.firmware = "nvidia/tegra186/xusb.bin",
+	.supply_names = tegra186_supply_names,
+	.num_supplies = ARRAY_SIZE(tegra186_supply_names),
+	.phy_types = tegra186_phy_types,
+	.num_types = ARRAY_SIZE(tegra186_phy_types),
+	.context = &tegra186_xusb_context,
+	.ports = {
+		.usb3 = { .offset = 0, .count = 3, },
+		.usb2 = { .offset = 3, .count = 3, },
+		.hsic = { .offset = 6, .count = 1, },
+	},
+	.scale_ss_clock = false,
+	.has_ipfs = false,
+	.otg_reset_sspi = false,
+	.mbox = {
+		.cmd = 0xe4,
+		.data_in = 0xe8,
+		.data_out = 0xec,
+		.owner = 0xf0,
+	},
+	.lpm_support = true,
+};
+
+static const char * const tegra194_supply_names[] = {
+};
+
+static const struct tegra_xusb_phy_type tegra194_phy_types[] = {
+	{ .name = "usb3", .num = 4, },
+	{ .name = "usb2", .num = 4, },
+};
+
+static const struct tegra_xusb_soc tegra194_soc = {
+	.firmware = "nvidia/tegra194/xusb.bin",
+	.supply_names = tegra194_supply_names,
+	.num_supplies = ARRAY_SIZE(tegra194_supply_names),
+	.phy_types = tegra194_phy_types,
+	.num_types = ARRAY_SIZE(tegra194_phy_types),
+	.context = &tegra186_xusb_context,
+	.ports = {
+		.usb3 = { .offset = 0, .count = 4, },
+		.usb2 = { .offset = 4, .count = 4, },
+	},
+	.scale_ss_clock = false,
+	.has_ipfs = false,
+	.otg_reset_sspi = false,
+	.mbox = {
+		.cmd = 0x68,
+		.data_in = 0x6c,
+		.data_out = 0x70,
+		.owner = 0x74,
+	},
+	.lpm_support = true,
+};
+MODULE_FIRMWARE("nvidia/tegra194/xusb.bin");
+
+static const struct of_device_id tegra_xusb_of_match[] = {
+	{ .compatible = "nvidia,tegra124-xusb", .data = &tegra124_soc },
+	{ .compatible = "nvidia,tegra210-xusb", .data = &tegra210_soc },
+	{ .compatible = "nvidia,tegra186-xusb", .data = &tegra186_soc },
+	{ .compatible = "nvidia,tegra194-xusb", .data = &tegra194_soc },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tegra_xusb_of_match);
+
+static struct platform_driver tegra_xusb_driver = {
+	.probe = tegra_xusb_probe,
+	.remove = tegra_xusb_remove,
+	.driver = {
+		.name = "tegra-xusb",
+		.pm = &tegra_xusb_pm_ops,
+		.of_match_table = tegra_xusb_of_match,
+	},
+};
+
+static void tegra_xhci_quirks(struct device *dev, struct xhci_hcd *xhci)
+{
+	struct tegra_xusb *tegra = dev_get_drvdata(dev);
+
+	xhci->quirks |= XHCI_PLAT;
+	if (tegra && tegra->soc->lpm_support)
+		xhci->quirks |= XHCI_LPM_SUPPORT;
+}
+
+static int tegra_xhci_setup(struct usb_hcd *hcd)
+{
+	return xhci_gen_setup(hcd, tegra_xhci_quirks);
+}
+
+static const struct xhci_driver_overrides tegra_xhci_overrides __initconst = {
+	.reset = tegra_xhci_setup,
+};
+
+static int __init tegra_xusb_init(void)
+{
+	xhci_init_driver(&tegra_xhci_hc_driver, &tegra_xhci_overrides);
+
+	return platform_driver_register(&tegra_xusb_driver);
+}
+module_init(tegra_xusb_init);
+
+static void __exit tegra_xusb_exit(void)
+{
+	platform_driver_unregister(&tegra_xusb_driver);
+}
+module_exit(tegra_xusb_exit);
+
+MODULE_AUTHOR("Andrew Bresticker <abrestic@chromium.org>");
+MODULE_DESCRIPTION("NVIDIA Tegra XUSB xHCI host-controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/xhci-trace.c b/drivers/usb/host/xhci-trace.c
new file mode 100644
index 000000000..d0070814d
--- /dev/null
+++ b/drivers/usb/host/xhci-trace.c
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2013 Xenia Ragiadakou
+ *
+ * Author: Xenia Ragiadakou
+ * Email : burzalodowa@gmail.com
+ */
+
+#define CREATE_TRACE_POINTS
+#include "xhci-trace.h"
+
+EXPORT_TRACEPOINT_SYMBOL_GPL(xhci_dbg_quirks);
diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h
new file mode 100644
index 000000000..61e93a354
--- /dev/null
+++ b/drivers/usb/host/xhci-trace.h
@@ -0,0 +1,635 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2013 Xenia Ragiadakou
+ *
+ * Author: Xenia Ragiadakou
+ * Email : burzalodowa@gmail.com
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM xhci-hcd
+
+/*
+ * The TRACE_SYSTEM_VAR defaults to TRACE_SYSTEM, but must be a
+ * legitimate C variable. It is not exported to user space.
+ */
+#undef TRACE_SYSTEM_VAR
+#define TRACE_SYSTEM_VAR xhci_hcd
+
+#if !defined(__XHCI_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define __XHCI_TRACE_H
+
+#include <linux/tracepoint.h>
+#include "xhci.h"
+#include "xhci-dbgcap.h"
+
+DECLARE_EVENT_CLASS(xhci_log_msg,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf),
+	TP_STRUCT__entry(__vstring(msg, vaf->fmt, vaf->va)),
+	TP_fast_assign(
+		__assign_vstr(msg, vaf->fmt, vaf->va);
+	),
+	TP_printk("%s", __get_str(msg))
+);
+
+DEFINE_EVENT(xhci_log_msg, xhci_dbg_address,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf)
+);
+
+DEFINE_EVENT(xhci_log_msg, xhci_dbg_context_change,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf)
+);
+
+DEFINE_EVENT(xhci_log_msg, xhci_dbg_quirks,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf)
+);
+
+DEFINE_EVENT(xhci_log_msg, xhci_dbg_reset_ep,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf)
+);
+
+DEFINE_EVENT(xhci_log_msg, xhci_dbg_cancel_urb,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf)
+);
+
+DEFINE_EVENT(xhci_log_msg, xhci_dbg_init,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf)
+);
+
+DEFINE_EVENT(xhci_log_msg, xhci_dbg_ring_expansion,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf)
+);
+
+DECLARE_EVENT_CLASS(xhci_log_ctx,
+	TP_PROTO(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx,
+		 unsigned int ep_num),
+	TP_ARGS(xhci, ctx, ep_num),
+	TP_STRUCT__entry(
+		__field(int, ctx_64)
+		__field(unsigned, ctx_type)
+		__field(dma_addr_t, ctx_dma)
+		__field(u8 *, ctx_va)
+		__field(unsigned, ctx_ep_num)
+		__field(int, slot_id)
+		__dynamic_array(u32, ctx_data,
+			((HCC_64BYTE_CONTEXT(xhci->hcc_params) + 1) * 8) *
+			((ctx->type == XHCI_CTX_TYPE_INPUT) + ep_num + 1))
+	),
+	TP_fast_assign(
+		struct usb_device *udev;
+
+		udev = to_usb_device(xhci_to_hcd(xhci)->self.controller);
+		__entry->ctx_64 = HCC_64BYTE_CONTEXT(xhci->hcc_params);
+		__entry->ctx_type = ctx->type;
+		__entry->ctx_dma = ctx->dma;
+		__entry->ctx_va = ctx->bytes;
+		__entry->slot_id = udev->slot_id;
+		__entry->ctx_ep_num = ep_num;
+		memcpy(__get_dynamic_array(ctx_data), ctx->bytes,
+			((HCC_64BYTE_CONTEXT(xhci->hcc_params) + 1) * 32) *
+			((ctx->type == XHCI_CTX_TYPE_INPUT) + ep_num + 1));
+	),
+	TP_printk("ctx_64=%d, ctx_type=%u, ctx_dma=@%llx, ctx_va=@%p",
+			__entry->ctx_64, __entry->ctx_type,
+			(unsigned long long) __entry->ctx_dma, __entry->ctx_va
+	)
+);
+
+DEFINE_EVENT(xhci_log_ctx, xhci_address_ctx,
+	TP_PROTO(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx,
+		 unsigned int ep_num),
+	TP_ARGS(xhci, ctx, ep_num)
+);
+
+DECLARE_EVENT_CLASS(xhci_log_trb,
+	TP_PROTO(struct xhci_ring *ring, struct xhci_generic_trb *trb),
+	TP_ARGS(ring, trb),
+	TP_STRUCT__entry(
+		__field(u32, type)
+		__field(u32, field0)
+		__field(u32, field1)
+		__field(u32, field2)
+		__field(u32, field3)
+		__dynamic_array(char, str, XHCI_MSG_MAX)
+	),
+	TP_fast_assign(
+		__entry->type = ring->type;
+		__entry->field0 = le32_to_cpu(trb->field[0]);
+		__entry->field1 = le32_to_cpu(trb->field[1]);
+		__entry->field2 = le32_to_cpu(trb->field[2]);
+		__entry->field3 = le32_to_cpu(trb->field[3]);
+	),
+	TP_printk("%s: %s", xhci_ring_type_string(__entry->type),
+		  xhci_decode_trb(__get_str(str), XHCI_MSG_MAX, __entry->field0, __entry->field1,
+					__entry->field2, __entry->field3)
+	)
+);
+
+DEFINE_EVENT(xhci_log_trb, xhci_handle_event,
+	TP_PROTO(struct xhci_ring *ring, struct xhci_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(xhci_log_trb, xhci_handle_command,
+	TP_PROTO(struct xhci_ring *ring, struct xhci_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(xhci_log_trb, xhci_handle_transfer,
+	TP_PROTO(struct xhci_ring *ring, struct xhci_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(xhci_log_trb, xhci_queue_trb,
+	TP_PROTO(struct xhci_ring *ring, struct xhci_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(xhci_log_trb, xhci_dbc_handle_event,
+	TP_PROTO(struct xhci_ring *ring, struct xhci_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(xhci_log_trb, xhci_dbc_handle_transfer,
+	TP_PROTO(struct xhci_ring *ring, struct xhci_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(xhci_log_trb, xhci_dbc_gadget_ep_queue,
+	TP_PROTO(struct xhci_ring *ring, struct xhci_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DECLARE_EVENT_CLASS(xhci_log_free_virt_dev,
+	TP_PROTO(struct xhci_virt_device *vdev),
+	TP_ARGS(vdev),
+	TP_STRUCT__entry(
+		__field(void *, vdev)
+		__field(unsigned long long, out_ctx)
+		__field(unsigned long long, in_ctx)
+		__field(u8, fake_port)
+		__field(u8, real_port)
+		__field(u16, current_mel)
+
+	),
+	TP_fast_assign(
+		__entry->vdev = vdev;
+		__entry->in_ctx = (unsigned long long) vdev->in_ctx->dma;
+		__entry->out_ctx = (unsigned long long) vdev->out_ctx->dma;
+		__entry->fake_port = (u8) vdev->fake_port;
+		__entry->real_port = (u8) vdev->real_port;
+		__entry->current_mel = (u16) vdev->current_mel;
+		),
+	TP_printk("vdev %p ctx %llx | %llx fake_port %d real_port %d current_mel %d",
+		__entry->vdev, __entry->in_ctx, __entry->out_ctx,
+		__entry->fake_port, __entry->real_port, __entry->current_mel
+	)
+);
+
+DEFINE_EVENT(xhci_log_free_virt_dev, xhci_free_virt_device,
+	TP_PROTO(struct xhci_virt_device *vdev),
+	TP_ARGS(vdev)
+);
+
+DECLARE_EVENT_CLASS(xhci_log_virt_dev,
+	TP_PROTO(struct xhci_virt_device *vdev),
+	TP_ARGS(vdev),
+	TP_STRUCT__entry(
+		__field(void *, vdev)
+		__field(unsigned long long, out_ctx)
+		__field(unsigned long long, in_ctx)
+		__field(int, devnum)
+		__field(int, state)
+		__field(int, speed)
+		__field(u8, portnum)
+		__field(u8, level)
+		__field(int, slot_id)
+	),
+	TP_fast_assign(
+		__entry->vdev = vdev;
+		__entry->in_ctx = (unsigned long long) vdev->in_ctx->dma;
+		__entry->out_ctx = (unsigned long long) vdev->out_ctx->dma;
+		__entry->devnum = vdev->udev->devnum;
+		__entry->state = vdev->udev->state;
+		__entry->speed = vdev->udev->speed;
+		__entry->portnum = vdev->udev->portnum;
+		__entry->level = vdev->udev->level;
+		__entry->slot_id = vdev->udev->slot_id;
+	),
+	TP_printk("vdev %p ctx %llx | %llx num %d state %d speed %d port %d level %d slot %d",
+		__entry->vdev, __entry->in_ctx, __entry->out_ctx,
+		__entry->devnum, __entry->state, __entry->speed,
+		__entry->portnum, __entry->level, __entry->slot_id
+	)
+);
+
+DEFINE_EVENT(xhci_log_virt_dev, xhci_alloc_virt_device,
+	TP_PROTO(struct xhci_virt_device *vdev),
+	TP_ARGS(vdev)
+);
+
+DEFINE_EVENT(xhci_log_virt_dev, xhci_setup_device,
+	TP_PROTO(struct xhci_virt_device *vdev),
+	TP_ARGS(vdev)
+);
+
+DEFINE_EVENT(xhci_log_virt_dev, xhci_setup_addressable_virt_device,
+	TP_PROTO(struct xhci_virt_device *vdev),
+	TP_ARGS(vdev)
+);
+
+DEFINE_EVENT(xhci_log_virt_dev, xhci_stop_device,
+	TP_PROTO(struct xhci_virt_device *vdev),
+	TP_ARGS(vdev)
+);
+
+DECLARE_EVENT_CLASS(xhci_log_urb,
+	TP_PROTO(struct urb *urb),
+	TP_ARGS(urb),
+	TP_STRUCT__entry(
+		__field(void *, urb)
+		__field(unsigned int, pipe)
+		__field(unsigned int, stream)
+		__field(int, status)
+		__field(unsigned int, flags)
+		__field(int, num_mapped_sgs)
+		__field(int, num_sgs)
+		__field(int, length)
+		__field(int, actual)
+		__field(int, epnum)
+		__field(int, dir_in)
+		__field(int, type)
+		__field(int, slot_id)
+	),
+	TP_fast_assign(
+		__entry->urb = urb;
+		__entry->pipe = urb->pipe;
+		__entry->stream = urb->stream_id;
+		__entry->status = urb->status;
+		__entry->flags = urb->transfer_flags;
+		__entry->num_mapped_sgs = urb->num_mapped_sgs;
+		__entry->num_sgs = urb->num_sgs;
+		__entry->length = urb->transfer_buffer_length;
+		__entry->actual = urb->actual_length;
+		__entry->epnum = usb_endpoint_num(&urb->ep->desc);
+		__entry->dir_in = usb_endpoint_dir_in(&urb->ep->desc);
+		__entry->type = usb_endpoint_type(&urb->ep->desc);
+		__entry->slot_id = urb->dev->slot_id;
+	),
+	TP_printk("ep%d%s-%s: urb %p pipe %u slot %d length %d/%d sgs %d/%d stream %d flags %08x",
+			__entry->epnum, __entry->dir_in ? "in" : "out",
+			__print_symbolic(__entry->type,
+				   { USB_ENDPOINT_XFER_INT,	"intr" },
+				   { USB_ENDPOINT_XFER_CONTROL,	"control" },
+				   { USB_ENDPOINT_XFER_BULK,	"bulk" },
+				   { USB_ENDPOINT_XFER_ISOC,	"isoc" }),
+			__entry->urb, __entry->pipe, __entry->slot_id,
+			__entry->actual, __entry->length, __entry->num_mapped_sgs,
+			__entry->num_sgs, __entry->stream, __entry->flags
+		)
+);
+
+DEFINE_EVENT(xhci_log_urb, xhci_urb_enqueue,
+	TP_PROTO(struct urb *urb),
+	TP_ARGS(urb)
+);
+
+DEFINE_EVENT(xhci_log_urb, xhci_urb_giveback,
+	TP_PROTO(struct urb *urb),
+	TP_ARGS(urb)
+);
+
+DEFINE_EVENT(xhci_log_urb, xhci_urb_dequeue,
+	TP_PROTO(struct urb *urb),
+	TP_ARGS(urb)
+);
+
+DECLARE_EVENT_CLASS(xhci_log_ep_ctx,
+	TP_PROTO(struct xhci_ep_ctx *ctx),
+	TP_ARGS(ctx),
+	TP_STRUCT__entry(
+		__field(u32, info)
+		__field(u32, info2)
+		__field(u64, deq)
+		__field(u32, tx_info)
+		__dynamic_array(char, str, XHCI_MSG_MAX)
+	),
+	TP_fast_assign(
+		__entry->info = le32_to_cpu(ctx->ep_info);
+		__entry->info2 = le32_to_cpu(ctx->ep_info2);
+		__entry->deq = le64_to_cpu(ctx->deq);
+		__entry->tx_info = le32_to_cpu(ctx->tx_info);
+	),
+	TP_printk("%s", xhci_decode_ep_context(__get_str(str),
+		__entry->info, __entry->info2, __entry->deq, __entry->tx_info)
+	)
+);
+
+DEFINE_EVENT(xhci_log_ep_ctx, xhci_handle_cmd_stop_ep,
+	TP_PROTO(struct xhci_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(xhci_log_ep_ctx, xhci_handle_cmd_set_deq_ep,
+	TP_PROTO(struct xhci_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(xhci_log_ep_ctx, xhci_handle_cmd_reset_ep,
+	TP_PROTO(struct xhci_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(xhci_log_ep_ctx, xhci_handle_cmd_config_ep,
+	TP_PROTO(struct xhci_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(xhci_log_ep_ctx, xhci_add_endpoint,
+	TP_PROTO(struct xhci_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DECLARE_EVENT_CLASS(xhci_log_slot_ctx,
+	TP_PROTO(struct xhci_slot_ctx *ctx),
+	TP_ARGS(ctx),
+	TP_STRUCT__entry(
+		__field(u32, info)
+		__field(u32, info2)
+		__field(u32, tt_info)
+		__field(u32, state)
+		__dynamic_array(char, str, XHCI_MSG_MAX)
+	),
+	TP_fast_assign(
+		__entry->info = le32_to_cpu(ctx->dev_info);
+		__entry->info2 = le32_to_cpu(ctx->dev_info2);
+		__entry->tt_info = le64_to_cpu(ctx->tt_info);
+		__entry->state = le32_to_cpu(ctx->dev_state);
+	),
+	TP_printk("%s", xhci_decode_slot_context(__get_str(str),
+			__entry->info, __entry->info2,
+			__entry->tt_info, __entry->state)
+	)
+);
+
+DEFINE_EVENT(xhci_log_slot_ctx, xhci_alloc_dev,
+	TP_PROTO(struct xhci_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(xhci_log_slot_ctx, xhci_free_dev,
+	TP_PROTO(struct xhci_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(xhci_log_slot_ctx, xhci_handle_cmd_disable_slot,
+	TP_PROTO(struct xhci_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(xhci_log_slot_ctx, xhci_discover_or_reset_device,
+	TP_PROTO(struct xhci_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(xhci_log_slot_ctx, xhci_setup_device_slot,
+	TP_PROTO(struct xhci_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(xhci_log_slot_ctx, xhci_handle_cmd_addr_dev,
+	TP_PROTO(struct xhci_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(xhci_log_slot_ctx, xhci_handle_cmd_reset_dev,
+	TP_PROTO(struct xhci_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(xhci_log_slot_ctx, xhci_handle_cmd_set_deq,
+	TP_PROTO(struct xhci_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(xhci_log_slot_ctx, xhci_configure_endpoint,
+	TP_PROTO(struct xhci_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DECLARE_EVENT_CLASS(xhci_log_ctrl_ctx,
+	TP_PROTO(struct xhci_input_control_ctx *ctrl_ctx),
+	TP_ARGS(ctrl_ctx),
+	TP_STRUCT__entry(
+		__field(u32, drop)
+		__field(u32, add)
+		__dynamic_array(char, str, XHCI_MSG_MAX)
+	),
+	TP_fast_assign(
+		__entry->drop = le32_to_cpu(ctrl_ctx->drop_flags);
+		__entry->add = le32_to_cpu(ctrl_ctx->add_flags);
+	),
+	TP_printk("%s", xhci_decode_ctrl_ctx(__get_str(str), __entry->drop, __entry->add)
+	)
+);
+
+DEFINE_EVENT(xhci_log_ctrl_ctx, xhci_address_ctrl_ctx,
+	TP_PROTO(struct xhci_input_control_ctx *ctrl_ctx),
+	TP_ARGS(ctrl_ctx)
+);
+
+DEFINE_EVENT(xhci_log_ctrl_ctx, xhci_configure_endpoint_ctrl_ctx,
+	TP_PROTO(struct xhci_input_control_ctx *ctrl_ctx),
+	TP_ARGS(ctrl_ctx)
+);
+
+DECLARE_EVENT_CLASS(xhci_log_ring,
+	TP_PROTO(struct xhci_ring *ring),
+	TP_ARGS(ring),
+	TP_STRUCT__entry(
+		__field(u32, type)
+		__field(void *, ring)
+		__field(dma_addr_t, enq)
+		__field(dma_addr_t, deq)
+		__field(dma_addr_t, enq_seg)
+		__field(dma_addr_t, deq_seg)
+		__field(unsigned int, num_segs)
+		__field(unsigned int, stream_id)
+		__field(unsigned int, cycle_state)
+		__field(unsigned int, num_trbs_free)
+		__field(unsigned int, bounce_buf_len)
+	),
+	TP_fast_assign(
+		__entry->ring = ring;
+		__entry->type = ring->type;
+		__entry->num_segs = ring->num_segs;
+		__entry->stream_id = ring->stream_id;
+		__entry->enq_seg = ring->enq_seg->dma;
+		__entry->deq_seg = ring->deq_seg->dma;
+		__entry->cycle_state = ring->cycle_state;
+		__entry->num_trbs_free = ring->num_trbs_free;
+		__entry->bounce_buf_len = ring->bounce_buf_len;
+		__entry->enq = xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue);
+		__entry->deq = xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
+	),
+	TP_printk("%s %p: enq %pad(%pad) deq %pad(%pad) segs %d stream %d free_trbs %d bounce %d cycle %d",
+			xhci_ring_type_string(__entry->type), __entry->ring,
+			&__entry->enq, &__entry->enq_seg,
+			&__entry->deq, &__entry->deq_seg,
+			__entry->num_segs,
+			__entry->stream_id,
+			__entry->num_trbs_free,
+			__entry->bounce_buf_len,
+			__entry->cycle_state
+		)
+);
+
+DEFINE_EVENT(xhci_log_ring, xhci_ring_alloc,
+	TP_PROTO(struct xhci_ring *ring),
+	TP_ARGS(ring)
+);
+
+DEFINE_EVENT(xhci_log_ring, xhci_ring_free,
+	TP_PROTO(struct xhci_ring *ring),
+	TP_ARGS(ring)
+);
+
+DEFINE_EVENT(xhci_log_ring, xhci_ring_expansion,
+	TP_PROTO(struct xhci_ring *ring),
+	TP_ARGS(ring)
+);
+
+DEFINE_EVENT(xhci_log_ring, xhci_inc_enq,
+	TP_PROTO(struct xhci_ring *ring),
+	TP_ARGS(ring)
+);
+
+DEFINE_EVENT(xhci_log_ring, xhci_inc_deq,
+	TP_PROTO(struct xhci_ring *ring),
+	TP_ARGS(ring)
+);
+
+DECLARE_EVENT_CLASS(xhci_log_portsc,
+		    TP_PROTO(u32 portnum, u32 portsc),
+		    TP_ARGS(portnum, portsc),
+		    TP_STRUCT__entry(
+				     __field(u32, portnum)
+				     __field(u32, portsc)
+				     __dynamic_array(char, str, XHCI_MSG_MAX)
+				     ),
+		    TP_fast_assign(
+				   __entry->portnum = portnum;
+				   __entry->portsc = portsc;
+				   ),
+		    TP_printk("port-%d: %s",
+			      __entry->portnum,
+			      xhci_decode_portsc(__get_str(str), __entry->portsc)
+			      )
+);
+
+DEFINE_EVENT(xhci_log_portsc, xhci_handle_port_status,
+	     TP_PROTO(u32 portnum, u32 portsc),
+	     TP_ARGS(portnum, portsc)
+);
+
+DEFINE_EVENT(xhci_log_portsc, xhci_get_port_status,
+	     TP_PROTO(u32 portnum, u32 portsc),
+	     TP_ARGS(portnum, portsc)
+);
+
+DEFINE_EVENT(xhci_log_portsc, xhci_hub_status_data,
+	     TP_PROTO(u32 portnum, u32 portsc),
+	     TP_ARGS(portnum, portsc)
+);
+
+DECLARE_EVENT_CLASS(xhci_log_doorbell,
+	TP_PROTO(u32 slot, u32 doorbell),
+	TP_ARGS(slot, doorbell),
+	TP_STRUCT__entry(
+		__field(u32, slot)
+		__field(u32, doorbell)
+		__dynamic_array(char, str, XHCI_MSG_MAX)
+	),
+	TP_fast_assign(
+		__entry->slot = slot;
+		__entry->doorbell = doorbell;
+	),
+	TP_printk("Ring doorbell for %s",
+		  xhci_decode_doorbell(__get_str(str), __entry->slot, __entry->doorbell)
+	)
+);
+
+DEFINE_EVENT(xhci_log_doorbell, xhci_ring_ep_doorbell,
+	     TP_PROTO(u32 slot, u32 doorbell),
+	     TP_ARGS(slot, doorbell)
+);
+
+DEFINE_EVENT(xhci_log_doorbell, xhci_ring_host_doorbell,
+	     TP_PROTO(u32 slot, u32 doorbell),
+	     TP_ARGS(slot, doorbell)
+);
+
+DECLARE_EVENT_CLASS(xhci_dbc_log_request,
+	TP_PROTO(struct dbc_request *req),
+	TP_ARGS(req),
+	TP_STRUCT__entry(
+		__field(struct dbc_request *, req)
+		__field(bool, dir)
+		__field(unsigned int, actual)
+		__field(unsigned int, length)
+		__field(int, status)
+	),
+	TP_fast_assign(
+		__entry->req = req;
+		__entry->dir = req->direction;
+		__entry->actual = req->actual;
+		__entry->length = req->length;
+		__entry->status = req->status;
+	),
+	TP_printk("%s: req %p length %u/%u ==> %d",
+		__entry->dir ? "bulk-in" : "bulk-out",
+		__entry->req, __entry->actual,
+		__entry->length, __entry->status
+	)
+);
+
+DEFINE_EVENT(xhci_dbc_log_request, xhci_dbc_alloc_request,
+	TP_PROTO(struct dbc_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(xhci_dbc_log_request, xhci_dbc_free_request,
+	TP_PROTO(struct dbc_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(xhci_dbc_log_request, xhci_dbc_queue_request,
+	TP_PROTO(struct dbc_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(xhci_dbc_log_request, xhci_dbc_giveback_request,
+	TP_PROTO(struct dbc_request *req),
+	TP_ARGS(req)
+);
+#endif /* __XHCI_TRACE_H */
+
+/* this part must be outside header guard */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE xhci-trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
new file mode 100644
index 000000000..c02ad4f76
--- /dev/null
+++ b/drivers/usb/host/xhci.c
@@ -0,0 +1,5574 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ */
+
+#include <linux/pci.h>
+#include <linux/iommu.h>
+#include <linux/iopoll.h>
+#include <linux/irq.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/dmi.h>
+#include <linux/dma-mapping.h>
+
+#include "xhci.h"
+#include "xhci-trace.h"
+#include "xhci-debugfs.h"
+#include "xhci-dbgcap.h"
+
+#define DRIVER_AUTHOR "Sarah Sharp"
+#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
+
+#define	PORT_WAKE_BITS	(PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
+
+/* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */
+static int link_quirk;
+module_param(link_quirk, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
+
+static unsigned long long quirks;
+module_param(quirks, ullong, S_IRUGO);
+MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
+
+static bool td_on_ring(struct xhci_td *td, struct xhci_ring *ring)
+{
+	struct xhci_segment *seg = ring->first_seg;
+
+	if (!td || !td->start_seg)
+		return false;
+	do {
+		if (seg == td->start_seg)
+			return true;
+		seg = seg->next;
+	} while (seg && seg != ring->first_seg);
+
+	return false;
+}
+
+/*
+ * xhci_handshake - spin reading hc until handshake completes or fails
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @usec: timeout in microseconds
+ *
+ * Returns negative errno, or zero on success
+ *
+ * Success happens when the "mask" bits have the specified value (hardware
+ * handshake done).  There are two failure modes:  "usec" have passed (major
+ * hardware flakeout), or the register reads as all-ones (hardware removed).
+ */
+int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us)
+{
+	u32	result;
+	int	ret;
+
+	ret = readl_poll_timeout_atomic(ptr, result,
+					(result & mask) == done ||
+					result == U32_MAX,
+					1, timeout_us);
+	if (result == U32_MAX)		/* card removed */
+		return -ENODEV;
+
+	return ret;
+}
+
+/*
+ * Disable interrupts and begin the xHCI halting process.
+ */
+void xhci_quiesce(struct xhci_hcd *xhci)
+{
+	u32 halted;
+	u32 cmd;
+	u32 mask;
+
+	mask = ~(XHCI_IRQS);
+	halted = readl(&xhci->op_regs->status) & STS_HALT;
+	if (!halted)
+		mask &= ~CMD_RUN;
+
+	cmd = readl(&xhci->op_regs->command);
+	cmd &= mask;
+	writel(cmd, &xhci->op_regs->command);
+}
+
+/*
+ * Force HC into halt state.
+ *
+ * Disable any IRQs and clear the run/stop bit.
+ * HC will complete any current and actively pipelined transactions, and
+ * should halt within 16 ms of the run/stop bit being cleared.
+ * Read HC Halted bit in the status register to see when the HC is finished.
+ */
+int xhci_halt(struct xhci_hcd *xhci)
+{
+	int ret;
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Halt the HC");
+	xhci_quiesce(xhci);
+
+	ret = xhci_handshake(&xhci->op_regs->status,
+			STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
+	if (ret) {
+		xhci_warn(xhci, "Host halt failed, %d\n", ret);
+		return ret;
+	}
+
+	xhci->xhc_state |= XHCI_STATE_HALTED;
+	xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+
+	return ret;
+}
+
+/*
+ * Set the run bit and wait for the host to be running.
+ */
+int xhci_start(struct xhci_hcd *xhci)
+{
+	u32 temp;
+	int ret;
+
+	temp = readl(&xhci->op_regs->command);
+	temp |= (CMD_RUN);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Turn on HC, cmd = 0x%x.",
+			temp);
+	writel(temp, &xhci->op_regs->command);
+
+	/*
+	 * Wait for the HCHalted Status bit to be 0 to indicate the host is
+	 * running.
+	 */
+	ret = xhci_handshake(&xhci->op_regs->status,
+			STS_HALT, 0, XHCI_MAX_HALT_USEC);
+	if (ret == -ETIMEDOUT)
+		xhci_err(xhci, "Host took too long to start, "
+				"waited %u microseconds.\n",
+				XHCI_MAX_HALT_USEC);
+	if (!ret) {
+		/* clear state flags. Including dying, halted or removing */
+		xhci->xhc_state = 0;
+		xhci->run_graceperiod = jiffies + msecs_to_jiffies(500);
+	}
+
+	return ret;
+}
+
+/*
+ * Reset a halted HC.
+ *
+ * This resets pipelines, timers, counters, state machines, etc.
+ * Transactions will be terminated immediately, and operational registers
+ * will be set to their defaults.
+ */
+int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us)
+{
+	u32 command;
+	u32 state;
+	int ret;
+
+	state = readl(&xhci->op_regs->status);
+
+	if (state == ~(u32)0) {
+		xhci_warn(xhci, "Host not accessible, reset failed.\n");
+		return -ENODEV;
+	}
+
+	if ((state & STS_HALT) == 0) {
+		xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
+		return 0;
+	}
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Reset the HC");
+	command = readl(&xhci->op_regs->command);
+	command |= CMD_RESET;
+	writel(command, &xhci->op_regs->command);
+
+	/* Existing Intel xHCI controllers require a delay of 1 mS,
+	 * after setting the CMD_RESET bit, and before accessing any
+	 * HC registers. This allows the HC to complete the
+	 * reset operation and be ready for HC register access.
+	 * Without this delay, the subsequent HC register access,
+	 * may result in a system hang very rarely.
+	 */
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		udelay(1000);
+
+	ret = xhci_handshake(&xhci->op_regs->command, CMD_RESET, 0, timeout_us);
+	if (ret)
+		return ret;
+
+	if (xhci->quirks & XHCI_ASMEDIA_MODIFY_FLOWCONTROL)
+		usb_asmedia_modifyflowcontrol(to_pci_dev(xhci_to_hcd(xhci)->self.controller));
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			 "Wait for controller to be ready for doorbell rings");
+	/*
+	 * xHCI cannot write to any doorbells or operational registers other
+	 * than status until the "Controller Not Ready" flag is cleared.
+	 */
+	ret = xhci_handshake(&xhci->op_regs->status, STS_CNR, 0, timeout_us);
+
+	xhci->usb2_rhub.bus_state.port_c_suspend = 0;
+	xhci->usb2_rhub.bus_state.suspended_ports = 0;
+	xhci->usb2_rhub.bus_state.resuming_ports = 0;
+	xhci->usb3_rhub.bus_state.port_c_suspend = 0;
+	xhci->usb3_rhub.bus_state.suspended_ports = 0;
+	xhci->usb3_rhub.bus_state.resuming_ports = 0;
+
+	return ret;
+}
+
+static void xhci_zero_64b_regs(struct xhci_hcd *xhci)
+{
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+	struct iommu_domain *domain;
+	int err, i;
+	u64 val;
+	u32 intrs;
+
+	/*
+	 * Some Renesas controllers get into a weird state if they are
+	 * reset while programmed with 64bit addresses (they will preserve
+	 * the top half of the address in internal, non visible
+	 * registers). You end up with half the address coming from the
+	 * kernel, and the other half coming from the firmware. Also,
+	 * changing the programming leads to extra accesses even if the
+	 * controller is supposed to be halted. The controller ends up with
+	 * a fatal fault, and is then ripe for being properly reset.
+	 *
+	 * Special care is taken to only apply this if the device is behind
+	 * an iommu. Doing anything when there is no iommu is definitely
+	 * unsafe...
+	 */
+	domain = iommu_get_domain_for_dev(dev);
+	if (!(xhci->quirks & XHCI_ZERO_64B_REGS) || !domain ||
+	    domain->type == IOMMU_DOMAIN_IDENTITY)
+		return;
+
+	xhci_info(xhci, "Zeroing 64bit base registers, expecting fault\n");
+
+	/* Clear HSEIE so that faults do not get signaled */
+	val = readl(&xhci->op_regs->command);
+	val &= ~CMD_HSEIE;
+	writel(val, &xhci->op_regs->command);
+
+	/* Clear HSE (aka FATAL) */
+	val = readl(&xhci->op_regs->status);
+	val |= STS_FATAL;
+	writel(val, &xhci->op_regs->status);
+
+	/* Now zero the registers, and brace for impact */
+	val = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+	if (upper_32_bits(val))
+		xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
+	val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+	if (upper_32_bits(val))
+		xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
+
+	intrs = min_t(u32, HCS_MAX_INTRS(xhci->hcs_params1),
+		      ARRAY_SIZE(xhci->run_regs->ir_set));
+
+	for (i = 0; i < intrs; i++) {
+		struct xhci_intr_reg __iomem *ir;
+
+		ir = &xhci->run_regs->ir_set[i];
+		val = xhci_read_64(xhci, &ir->erst_base);
+		if (upper_32_bits(val))
+			xhci_write_64(xhci, 0, &ir->erst_base);
+		val= xhci_read_64(xhci, &ir->erst_dequeue);
+		if (upper_32_bits(val))
+			xhci_write_64(xhci, 0, &ir->erst_dequeue);
+	}
+
+	/* Wait for the fault to appear. It will be cleared on reset */
+	err = xhci_handshake(&xhci->op_regs->status,
+			     STS_FATAL, STS_FATAL,
+			     XHCI_MAX_HALT_USEC);
+	if (!err)
+		xhci_info(xhci, "Fault detected\n");
+}
+
+#ifdef CONFIG_USB_PCI
+/*
+ * Set up MSI
+ */
+static int xhci_setup_msi(struct xhci_hcd *xhci)
+{
+	int ret;
+	/*
+	 * TODO:Check with MSI Soc for sysdev
+	 */
+	struct pci_dev  *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
+	if (ret < 0) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+				"failed to allocate MSI entry");
+		return ret;
+	}
+
+	ret = request_irq(pdev->irq, xhci_msi_irq,
+				0, "xhci_hcd", xhci_to_hcd(xhci));
+	if (ret) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+				"disable MSI interrupt");
+		pci_free_irq_vectors(pdev);
+	}
+
+	return ret;
+}
+
+/*
+ * Set up MSI-X
+ */
+static int xhci_setup_msix(struct xhci_hcd *xhci)
+{
+	int i, ret;
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+	/*
+	 * calculate number of msi-x vectors supported.
+	 * - HCS_MAX_INTRS: the max number of interrupts the host can handle,
+	 *   with max number of interrupters based on the xhci HCSPARAMS1.
+	 * - num_online_cpus: maximum msi-x vectors per CPUs core.
+	 *   Add additional 1 vector to ensure always available interrupt.
+	 */
+	xhci->msix_count = min(num_online_cpus() + 1,
+				HCS_MAX_INTRS(xhci->hcs_params1));
+
+	ret = pci_alloc_irq_vectors(pdev, xhci->msix_count, xhci->msix_count,
+			PCI_IRQ_MSIX);
+	if (ret < 0) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+				"Failed to enable MSI-X");
+		return ret;
+	}
+
+	for (i = 0; i < xhci->msix_count; i++) {
+		ret = request_irq(pci_irq_vector(pdev, i), xhci_msi_irq, 0,
+				"xhci_hcd", xhci_to_hcd(xhci));
+		if (ret)
+			goto disable_msix;
+	}
+
+	hcd->msix_enabled = 1;
+	return ret;
+
+disable_msix:
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "disable MSI-X interrupt");
+	while (--i >= 0)
+		free_irq(pci_irq_vector(pdev, i), xhci_to_hcd(xhci));
+	pci_free_irq_vectors(pdev);
+	return ret;
+}
+
+/* Free any IRQs and disable MSI-X */
+static void xhci_cleanup_msix(struct xhci_hcd *xhci)
+{
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+	if (xhci->quirks & XHCI_PLAT)
+		return;
+
+	/* return if using legacy interrupt */
+	if (hcd->irq > 0)
+		return;
+
+	if (hcd->msix_enabled) {
+		int i;
+
+		for (i = 0; i < xhci->msix_count; i++)
+			free_irq(pci_irq_vector(pdev, i), xhci_to_hcd(xhci));
+	} else {
+		free_irq(pci_irq_vector(pdev, 0), xhci_to_hcd(xhci));
+	}
+
+	pci_free_irq_vectors(pdev);
+	hcd->msix_enabled = 0;
+}
+
+static void __maybe_unused xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+{
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+
+	if (hcd->msix_enabled) {
+		struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+		int i;
+
+		for (i = 0; i < xhci->msix_count; i++)
+			synchronize_irq(pci_irq_vector(pdev, i));
+	}
+}
+
+static int xhci_try_enable_msi(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct pci_dev  *pdev;
+	int ret;
+
+	/* The xhci platform device has set up IRQs through usb_add_hcd. */
+	if (xhci->quirks & XHCI_PLAT)
+		return 0;
+
+	pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+	/*
+	 * Some Fresco Logic host controllers advertise MSI, but fail to
+	 * generate interrupts.  Don't even try to enable MSI.
+	 */
+	if (xhci->quirks & XHCI_BROKEN_MSI)
+		goto legacy_irq;
+
+	/* unregister the legacy interrupt */
+	if (hcd->irq)
+		free_irq(hcd->irq, hcd);
+	hcd->irq = 0;
+
+	ret = xhci_setup_msix(xhci);
+	if (ret)
+		/* fall back to msi*/
+		ret = xhci_setup_msi(xhci);
+
+	if (!ret) {
+		hcd->msi_enabled = 1;
+		return 0;
+	}
+
+	if (!pdev->irq) {
+		xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
+		return -EINVAL;
+	}
+
+ legacy_irq:
+	if (!strlen(hcd->irq_descr))
+		snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
+			 hcd->driver->description, hcd->self.busnum);
+
+	/* fall back to legacy interrupt*/
+	ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
+			hcd->irq_descr, hcd);
+	if (ret) {
+		xhci_err(xhci, "request interrupt %d failed\n",
+				pdev->irq);
+		return ret;
+	}
+	hcd->irq = pdev->irq;
+	return 0;
+}
+
+#else
+
+static inline int xhci_try_enable_msi(struct usb_hcd *hcd)
+{
+	return 0;
+}
+
+static inline void xhci_cleanup_msix(struct xhci_hcd *xhci)
+{
+}
+
+static inline void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+{
+}
+
+#endif
+
+static void compliance_mode_recovery(struct timer_list *t)
+{
+	struct xhci_hcd *xhci;
+	struct usb_hcd *hcd;
+	struct xhci_hub *rhub;
+	u32 temp;
+	int i;
+
+	xhci = from_timer(xhci, t, comp_mode_recovery_timer);
+	rhub = &xhci->usb3_rhub;
+	hcd = rhub->hcd;
+
+	if (!hcd)
+		return;
+
+	for (i = 0; i < rhub->num_ports; i++) {
+		temp = readl(rhub->ports[i]->addr);
+		if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
+			/*
+			 * Compliance Mode Detected. Letting USB Core
+			 * handle the Warm Reset
+			 */
+			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+					"Compliance mode detected->port %d",
+					i + 1);
+			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+					"Attempting compliance mode recovery");
+
+			if (hcd->state == HC_STATE_SUSPENDED)
+				usb_hcd_resume_root_hub(hcd);
+
+			usb_hcd_poll_rh_status(hcd);
+		}
+	}
+
+	if (xhci->port_status_u0 != ((1 << rhub->num_ports) - 1))
+		mod_timer(&xhci->comp_mode_recovery_timer,
+			jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+}
+
+/*
+ * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver
+ * that causes ports behind that hardware to enter compliance mode sometimes.
+ * The quirk creates a timer that polls every 2 seconds the link state of
+ * each host controller's port and recovers it by issuing a Warm reset
+ * if Compliance mode is detected, otherwise the port will become "dead" (no
+ * device connections or disconnections will be detected anymore). Becasue no
+ * status event is generated when entering compliance mode (per xhci spec),
+ * this quirk is needed on systems that have the failing hardware installed.
+ */
+static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
+{
+	xhci->port_status_u0 = 0;
+	timer_setup(&xhci->comp_mode_recovery_timer, compliance_mode_recovery,
+		    0);
+	xhci->comp_mode_recovery_timer.expires = jiffies +
+			msecs_to_jiffies(COMP_MODE_RCVRY_MSECS);
+
+	add_timer(&xhci->comp_mode_recovery_timer);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+			"Compliance mode recovery timer initialized");
+}
+
+/*
+ * This function identifies the systems that have installed the SN65LVPE502CP
+ * USB3.0 re-driver and that need the Compliance Mode Quirk.
+ * Systems:
+ * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
+ */
+static bool xhci_compliance_mode_recovery_timer_quirk_check(void)
+{
+	const char *dmi_product_name, *dmi_sys_vendor;
+
+	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+	dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+	if (!dmi_product_name || !dmi_sys_vendor)
+		return false;
+
+	if (!(strstr(dmi_sys_vendor, "Hewlett-Packard")))
+		return false;
+
+	if (strstr(dmi_product_name, "Z420") ||
+			strstr(dmi_product_name, "Z620") ||
+			strstr(dmi_product_name, "Z820") ||
+			strstr(dmi_product_name, "Z1 Workstation"))
+		return true;
+
+	return false;
+}
+
+static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci)
+{
+	return (xhci->port_status_u0 == ((1 << xhci->usb3_rhub.num_ports) - 1));
+}
+
+
+/*
+ * Initialize memory for HCD and xHC (one-time init).
+ *
+ * Program the PAGESIZE register, initialize the device context array, create
+ * device contexts (?), set up a command ring segment (or two?), create event
+ * ring (one for now).
+ */
+static int xhci_init(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	int retval;
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_init");
+	spin_lock_init(&xhci->lock);
+	if (xhci->hci_version == 0x95 && link_quirk) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"QUIRK: Not clearing Link TRB chain bits.");
+		xhci->quirks |= XHCI_LINK_TRB_QUIRK;
+	} else {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+				"xHCI doesn't need link TRB QUIRK");
+	}
+	retval = xhci_mem_init(xhci, GFP_KERNEL);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init");
+
+	/* Initializing Compliance Mode Recovery Data If Needed */
+	if (xhci_compliance_mode_recovery_timer_quirk_check()) {
+		xhci->quirks |= XHCI_COMP_MODE_QUIRK;
+		compliance_mode_recovery_timer_init(xhci);
+	}
+
+	return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+
+static int xhci_run_finished(struct xhci_hcd *xhci)
+{
+	unsigned long	flags;
+	u32		temp;
+
+	/*
+	 * Enable interrupts before starting the host (xhci 4.2 and 5.5.2).
+	 * Protect the short window before host is running with a lock
+	 */
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Enable interrupts");
+	temp = readl(&xhci->op_regs->command);
+	temp |= (CMD_EIE);
+	writel(temp, &xhci->op_regs->command);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Enable primary interrupter");
+	temp = readl(&xhci->ir_set->irq_pending);
+	writel(ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending);
+
+	if (xhci_start(xhci)) {
+		xhci_halt(xhci);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return -ENODEV;
+	}
+
+	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
+
+	if (xhci->quirks & XHCI_NEC_HOST)
+		xhci_ring_cmd_db(xhci);
+
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	return 0;
+}
+
+/*
+ * Start the HC after it was halted.
+ *
+ * This function is called by the USB core when the HC driver is added.
+ * Its opposite is xhci_stop().
+ *
+ * xhci_init() must be called once before this function can be called.
+ * Reset the HC, enable device slot contexts, program DCBAAP, and
+ * set command ring pointer and event ring pointer.
+ *
+ * Setup MSI-X vectors and enable interrupts.
+ */
+int xhci_run(struct usb_hcd *hcd)
+{
+	u32 temp;
+	u64 temp_64;
+	int ret;
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+	/* Start the xHCI host controller running only after the USB 2.0 roothub
+	 * is setup.
+	 */
+
+	hcd->uses_new_polling = 1;
+	if (!usb_hcd_is_primary_hcd(hcd))
+		return xhci_run_finished(xhci);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_run");
+
+	ret = xhci_try_enable_msi(hcd);
+	if (ret)
+		return ret;
+
+	temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	temp_64 &= ~ERST_PTR_MASK;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"ERST deq = 64'h%0lx", (long unsigned int) temp_64);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// Set the interrupt modulation register");
+	temp = readl(&xhci->ir_set->irq_control);
+	temp &= ~ER_IRQ_INTERVAL_MASK;
+	temp |= (xhci->imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
+	writel(temp, &xhci->ir_set->irq_control);
+
+	if (xhci->quirks & XHCI_NEC_HOST) {
+		struct xhci_command *command;
+
+		command = xhci_alloc_command(xhci, false, GFP_KERNEL);
+		if (!command)
+			return -ENOMEM;
+
+		ret = xhci_queue_vendor_command(xhci, command, 0, 0, 0,
+				TRB_TYPE(TRB_NEC_GET_FW));
+		if (ret)
+			xhci_free_command(xhci, command);
+	}
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"Finished %s for main hcd", __func__);
+
+	xhci_create_dbc_dev(xhci);
+
+	xhci_debugfs_init(xhci);
+
+	if (xhci_has_one_roothub(xhci))
+		return xhci_run_finished(xhci);
+
+	set_bit(HCD_FLAG_DEFER_RH_REGISTER, &hcd->flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xhci_run);
+
+/*
+ * Stop xHCI driver.
+ *
+ * This function is called by the USB core when the HC driver is removed.
+ * Its opposite is xhci_run().
+ *
+ * Disable device contexts, disable IRQs, and quiesce the HC.
+ * Reset the HC, finish any completed transactions, and cleanup memory.
+ */
+static void xhci_stop(struct usb_hcd *hcd)
+{
+	u32 temp;
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+	mutex_lock(&xhci->mutex);
+
+	/* Only halt host and free memory after both hcds are removed */
+	if (!usb_hcd_is_primary_hcd(hcd)) {
+		mutex_unlock(&xhci->mutex);
+		return;
+	}
+
+	xhci_remove_dbc_dev(xhci);
+
+	spin_lock_irq(&xhci->lock);
+	xhci->xhc_state |= XHCI_STATE_HALTED;
+	xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+	xhci_halt(xhci);
+	xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
+	spin_unlock_irq(&xhci->lock);
+
+	xhci_cleanup_msix(xhci);
+
+	/* Deleting Compliance Mode Recovery Timer */
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+			(!(xhci_all_ports_seen_u0(xhci)))) {
+		del_timer_sync(&xhci->comp_mode_recovery_timer);
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"%s: compliance mode recovery timer deleted",
+				__func__);
+	}
+
+	if (xhci->quirks & XHCI_AMD_PLL_FIX)
+		usb_amd_dev_put();
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// Disabling event ring interrupts");
+	temp = readl(&xhci->op_regs->status);
+	writel((temp & ~0x1fff) | STS_EINT, &xhci->op_regs->status);
+	temp = readl(&xhci->ir_set->irq_pending);
+	writel(ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "cleaning up memory");
+	xhci_mem_cleanup(xhci);
+	xhci_debugfs_exit(xhci);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"xhci_stop completed - status = %x",
+			readl(&xhci->op_regs->status));
+	mutex_unlock(&xhci->mutex);
+}
+
+/*
+ * Shutdown HC (not bus-specific)
+ *
+ * This is called when the machine is rebooting or halting.  We assume that the
+ * machine will be powered off, and the HC's internal state will be reset.
+ * Don't bother to free memory.
+ *
+ * This will only ever be called with the main usb_hcd (the USB3 roothub).
+ */
+void xhci_shutdown(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+	if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
+		usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev));
+
+	/* Don't poll the roothubs after shutdown. */
+	xhci_dbg(xhci, "%s: stopping usb%d port polling.\n",
+			__func__, hcd->self.busnum);
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	del_timer_sync(&hcd->rh_timer);
+
+	if (xhci->shared_hcd) {
+		clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+		del_timer_sync(&xhci->shared_hcd->rh_timer);
+	}
+
+	spin_lock_irq(&xhci->lock);
+	xhci_halt(xhci);
+
+	/*
+	 * Workaround for spurious wakeps at shutdown with HSW, and for boot
+	 * firmware delay in ADL-P PCH if port are left in U3 at shutdown
+	 */
+	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP ||
+	    xhci->quirks & XHCI_RESET_TO_DEFAULT)
+		xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
+
+	spin_unlock_irq(&xhci->lock);
+
+	xhci_cleanup_msix(xhci);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"xhci_shutdown completed - status = %x",
+			readl(&xhci->op_regs->status));
+}
+EXPORT_SYMBOL_GPL(xhci_shutdown);
+
+#ifdef CONFIG_PM
+static void xhci_save_registers(struct xhci_hcd *xhci)
+{
+	xhci->s3.command = readl(&xhci->op_regs->command);
+	xhci->s3.dev_nt = readl(&xhci->op_regs->dev_notification);
+	xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+	xhci->s3.config_reg = readl(&xhci->op_regs->config_reg);
+	xhci->s3.erst_size = readl(&xhci->ir_set->erst_size);
+	xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
+	xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	xhci->s3.irq_pending = readl(&xhci->ir_set->irq_pending);
+	xhci->s3.irq_control = readl(&xhci->ir_set->irq_control);
+}
+
+static void xhci_restore_registers(struct xhci_hcd *xhci)
+{
+	writel(xhci->s3.command, &xhci->op_regs->command);
+	writel(xhci->s3.dev_nt, &xhci->op_regs->dev_notification);
+	xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
+	writel(xhci->s3.config_reg, &xhci->op_regs->config_reg);
+	writel(xhci->s3.erst_size, &xhci->ir_set->erst_size);
+	xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
+	xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue);
+	writel(xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
+	writel(xhci->s3.irq_control, &xhci->ir_set->irq_control);
+}
+
+static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
+{
+	u64	val_64;
+
+	/* step 2: initialize command ring buffer */
+	val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+	val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+		(xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+				      xhci->cmd_ring->dequeue) &
+		 (u64) ~CMD_RING_RSVD_BITS) |
+		xhci->cmd_ring->cycle_state;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// Setting command ring address to 0x%llx",
+			(long unsigned long) val_64);
+	xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+}
+
+/*
+ * The whole command ring must be cleared to zero when we suspend the host.
+ *
+ * The host doesn't save the command ring pointer in the suspend well, so we
+ * need to re-program it on resume.  Unfortunately, the pointer must be 64-byte
+ * aligned, because of the reserved bits in the command ring dequeue pointer
+ * register.  Therefore, we can't just set the dequeue pointer back in the
+ * middle of the ring (TRBs are 16-byte aligned).
+ */
+static void xhci_clear_command_ring(struct xhci_hcd *xhci)
+{
+	struct xhci_ring *ring;
+	struct xhci_segment *seg;
+
+	ring = xhci->cmd_ring;
+	seg = ring->deq_seg;
+	do {
+		memset(seg->trbs, 0,
+			sizeof(union xhci_trb) * (TRBS_PER_SEGMENT - 1));
+		seg->trbs[TRBS_PER_SEGMENT - 1].link.control &=
+			cpu_to_le32(~TRB_CYCLE);
+		seg = seg->next;
+	} while (seg != ring->deq_seg);
+
+	/* Reset the software enqueue and dequeue pointers */
+	ring->deq_seg = ring->first_seg;
+	ring->dequeue = ring->first_seg->trbs;
+	ring->enq_seg = ring->deq_seg;
+	ring->enqueue = ring->dequeue;
+
+	ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1;
+	/*
+	 * Ring is now zeroed, so the HW should look for change of ownership
+	 * when the cycle bit is set to 1.
+	 */
+	ring->cycle_state = 1;
+
+	/*
+	 * Reset the hardware dequeue pointer.
+	 * Yes, this will need to be re-written after resume, but we're paranoid
+	 * and want to make sure the hardware doesn't access bogus memory
+	 * because, say, the BIOS or an SMI started the host without changing
+	 * the command ring pointers.
+	 */
+	xhci_set_cmd_ring_deq(xhci);
+}
+
+/*
+ * Disable port wake bits if do_wakeup is not set.
+ *
+ * Also clear a possible internal port wake state left hanging for ports that
+ * detected termination but never successfully enumerated (trained to 0U).
+ * Internal wake causes immediate xHCI wake after suspend. PORT_CSC write done
+ * at enumeration clears this wake, force one here as well for unconnected ports
+ */
+
+static void xhci_disable_hub_port_wake(struct xhci_hcd *xhci,
+				       struct xhci_hub *rhub,
+				       bool do_wakeup)
+{
+	unsigned long flags;
+	u32 t1, t2, portsc;
+	int i;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	for (i = 0; i < rhub->num_ports; i++) {
+		portsc = readl(rhub->ports[i]->addr);
+		t1 = xhci_port_state_to_neutral(portsc);
+		t2 = t1;
+
+		/* clear wake bits if do_wake is not set */
+		if (!do_wakeup)
+			t2 &= ~PORT_WAKE_BITS;
+
+		/* Don't touch csc bit if connected or connect change is set */
+		if (!(portsc & (PORT_CSC | PORT_CONNECT)))
+			t2 |= PORT_CSC;
+
+		if (t1 != t2) {
+			writel(t2, rhub->ports[i]->addr);
+			xhci_dbg(xhci, "config port %d-%d wake bits, portsc: 0x%x, write: 0x%x\n",
+				 rhub->hcd->self.busnum, i + 1, portsc, t2);
+		}
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
+static bool xhci_pending_portevent(struct xhci_hcd *xhci)
+{
+	struct xhci_port	**ports;
+	int			port_index;
+	u32			status;
+	u32			portsc;
+
+	status = readl(&xhci->op_regs->status);
+	if (status & STS_EINT)
+		return true;
+	/*
+	 * Checking STS_EINT is not enough as there is a lag between a change
+	 * bit being set and the Port Status Change Event that it generated
+	 * being written to the Event Ring. See note in xhci 1.1 section 4.19.2.
+	 */
+
+	port_index = xhci->usb2_rhub.num_ports;
+	ports = xhci->usb2_rhub.ports;
+	while (port_index--) {
+		portsc = readl(ports[port_index]->addr);
+		if (portsc & PORT_CHANGE_MASK ||
+		    (portsc & PORT_PLS_MASK) == XDEV_RESUME)
+			return true;
+	}
+	port_index = xhci->usb3_rhub.num_ports;
+	ports = xhci->usb3_rhub.ports;
+	while (port_index--) {
+		portsc = readl(ports[port_index]->addr);
+		if (portsc & PORT_CHANGE_MASK ||
+		    (portsc & PORT_PLS_MASK) == XDEV_RESUME)
+			return true;
+	}
+	return false;
+}
+
+/*
+ * Stop HC (not bus-specific)
+ *
+ * This is called when the machine transition into S3/S4 mode.
+ *
+ */
+int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
+{
+	int			rc = 0;
+	unsigned int		delay = XHCI_MAX_HALT_USEC * 2;
+	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
+	u32			command;
+	u32			res;
+
+	if (!hcd->state)
+		return 0;
+
+	if (hcd->state != HC_STATE_SUSPENDED ||
+	    (xhci->shared_hcd && xhci->shared_hcd->state != HC_STATE_SUSPENDED))
+		return -EINVAL;
+
+	/* Clear root port wake on bits if wakeup not allowed. */
+	xhci_disable_hub_port_wake(xhci, &xhci->usb3_rhub, do_wakeup);
+	xhci_disable_hub_port_wake(xhci, &xhci->usb2_rhub, do_wakeup);
+
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		return 0;
+
+	xhci_dbc_suspend(xhci);
+
+	/* Don't poll the roothubs on bus suspend. */
+	xhci_dbg(xhci, "%s: stopping usb%d port polling.\n",
+		 __func__, hcd->self.busnum);
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	del_timer_sync(&hcd->rh_timer);
+	if (xhci->shared_hcd) {
+		clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+		del_timer_sync(&xhci->shared_hcd->rh_timer);
+	}
+
+	if (xhci->quirks & XHCI_SUSPEND_DELAY)
+		usleep_range(1000, 1500);
+
+	spin_lock_irq(&xhci->lock);
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	if (xhci->shared_hcd)
+		clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
+	/* step 1: stop endpoint */
+	/* skipped assuming that port suspend has done */
+
+	/* step 2: clear Run/Stop bit */
+	command = readl(&xhci->op_regs->command);
+	command &= ~CMD_RUN;
+	writel(command, &xhci->op_regs->command);
+
+	/* Some chips from Fresco Logic need an extraordinary delay */
+	delay *= (xhci->quirks & XHCI_SLOW_SUSPEND) ? 10 : 1;
+
+	if (xhci_handshake(&xhci->op_regs->status,
+		      STS_HALT, STS_HALT, delay)) {
+		xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n");
+		spin_unlock_irq(&xhci->lock);
+		return -ETIMEDOUT;
+	}
+	xhci_clear_command_ring(xhci);
+
+	/* step 3: save registers */
+	xhci_save_registers(xhci);
+
+	/* step 4: set CSS flag */
+	command = readl(&xhci->op_regs->command);
+	command |= CMD_CSS;
+	writel(command, &xhci->op_regs->command);
+	xhci->broken_suspend = 0;
+	if (xhci_handshake(&xhci->op_regs->status,
+				STS_SAVE, 0, 20 * 1000)) {
+	/*
+	 * AMD SNPS xHC 3.0 occasionally does not clear the
+	 * SSS bit of USBSTS and when driver tries to poll
+	 * to see if the xHC clears BIT(8) which never happens
+	 * and driver assumes that controller is not responding
+	 * and times out. To workaround this, its good to check
+	 * if SRE and HCE bits are not set (as per xhci
+	 * Section 5.4.2) and bypass the timeout.
+	 */
+		res = readl(&xhci->op_regs->status);
+		if ((xhci->quirks & XHCI_SNPS_BROKEN_SUSPEND) &&
+		    (((res & STS_SRE) == 0) &&
+				((res & STS_HCE) == 0))) {
+			xhci->broken_suspend = 1;
+		} else {
+			xhci_warn(xhci, "WARN: xHC save state timeout\n");
+			spin_unlock_irq(&xhci->lock);
+			return -ETIMEDOUT;
+		}
+	}
+	spin_unlock_irq(&xhci->lock);
+
+	/*
+	 * Deleting Compliance Mode Recovery Timer because the xHCI Host
+	 * is about to be suspended.
+	 */
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+			(!(xhci_all_ports_seen_u0(xhci)))) {
+		del_timer_sync(&xhci->comp_mode_recovery_timer);
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"%s: compliance mode recovery timer deleted",
+				__func__);
+	}
+
+	/* step 5: remove core well power */
+	/* synchronize irq when using MSI-X */
+	xhci_msix_sync_irqs(xhci);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(xhci_suspend);
+
+/*
+ * start xHC (not bus-specific)
+ *
+ * This is called when the machine transition from S3/S4 mode.
+ *
+ */
+int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
+{
+	u32			command, temp = 0;
+	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
+	int			retval = 0;
+	bool			comp_timer_running = false;
+	bool			pending_portevent = false;
+	bool			reinit_xhc = false;
+
+	if (!hcd->state)
+		return 0;
+
+	/* Wait a bit if either of the roothubs need to settle from the
+	 * transition into bus suspend.
+	 */
+
+	if (time_before(jiffies, xhci->usb2_rhub.bus_state.next_statechange) ||
+	    time_before(jiffies, xhci->usb3_rhub.bus_state.next_statechange))
+		msleep(100);
+
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	if (xhci->shared_hcd)
+		set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
+
+	spin_lock_irq(&xhci->lock);
+
+	if (hibernated || xhci->quirks & XHCI_RESET_ON_RESUME || xhci->broken_suspend)
+		reinit_xhc = true;
+
+	if (!reinit_xhc) {
+		/*
+		 * Some controllers might lose power during suspend, so wait
+		 * for controller not ready bit to clear, just as in xHC init.
+		 */
+		retval = xhci_handshake(&xhci->op_regs->status,
+					STS_CNR, 0, 10 * 1000 * 1000);
+		if (retval) {
+			xhci_warn(xhci, "Controller not ready at resume %d\n",
+				  retval);
+			spin_unlock_irq(&xhci->lock);
+			return retval;
+		}
+		/* step 1: restore register */
+		xhci_restore_registers(xhci);
+		/* step 2: initialize command ring buffer */
+		xhci_set_cmd_ring_deq(xhci);
+		/* step 3: restore state and start state*/
+		/* step 3: set CRS flag */
+		command = readl(&xhci->op_regs->command);
+		command |= CMD_CRS;
+		writel(command, &xhci->op_regs->command);
+		/*
+		 * Some controllers take up to 55+ ms to complete the controller
+		 * restore so setting the timeout to 100ms. Xhci specification
+		 * doesn't mention any timeout value.
+		 */
+		if (xhci_handshake(&xhci->op_regs->status,
+			      STS_RESTORE, 0, 100 * 1000)) {
+			xhci_warn(xhci, "WARN: xHC restore state timeout\n");
+			spin_unlock_irq(&xhci->lock);
+			return -ETIMEDOUT;
+		}
+	}
+
+	temp = readl(&xhci->op_regs->status);
+
+	/* re-initialize the HC on Restore Error, or Host Controller Error */
+	if (temp & (STS_SRE | STS_HCE)) {
+		reinit_xhc = true;
+		if (!xhci->broken_suspend)
+			xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp);
+	}
+
+	if (reinit_xhc) {
+		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+				!(xhci_all_ports_seen_u0(xhci))) {
+			del_timer_sync(&xhci->comp_mode_recovery_timer);
+			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Compliance Mode Recovery Timer deleted!");
+		}
+
+		/* Let the USB core know _both_ roothubs lost power. */
+		usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
+		if (xhci->shared_hcd)
+			usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
+
+		xhci_dbg(xhci, "Stop HCD\n");
+		xhci_halt(xhci);
+		xhci_zero_64b_regs(xhci);
+		retval = xhci_reset(xhci, XHCI_RESET_LONG_USEC);
+		spin_unlock_irq(&xhci->lock);
+		if (retval)
+			return retval;
+		xhci_cleanup_msix(xhci);
+
+		xhci_dbg(xhci, "// Disabling event ring interrupts\n");
+		temp = readl(&xhci->op_regs->status);
+		writel((temp & ~0x1fff) | STS_EINT, &xhci->op_regs->status);
+		temp = readl(&xhci->ir_set->irq_pending);
+		writel(ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending);
+
+		xhci_dbg(xhci, "cleaning up memory\n");
+		xhci_mem_cleanup(xhci);
+		xhci_debugfs_exit(xhci);
+		xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
+			    readl(&xhci->op_regs->status));
+
+		/* USB core calls the PCI reinit and start functions twice:
+		 * first with the primary HCD, and then with the secondary HCD.
+		 * If we don't do the same, the host will never be started.
+		 */
+		xhci_dbg(xhci, "Initialize the xhci_hcd\n");
+		retval = xhci_init(hcd);
+		if (retval)
+			return retval;
+		comp_timer_running = true;
+
+		xhci_dbg(xhci, "Start the primary HCD\n");
+		retval = xhci_run(hcd);
+		if (!retval && xhci->shared_hcd) {
+			xhci_dbg(xhci, "Start the secondary HCD\n");
+			retval = xhci_run(xhci->shared_hcd);
+		}
+
+		hcd->state = HC_STATE_SUSPENDED;
+		if (xhci->shared_hcd)
+			xhci->shared_hcd->state = HC_STATE_SUSPENDED;
+		goto done;
+	}
+
+	/* step 4: set Run/Stop bit */
+	command = readl(&xhci->op_regs->command);
+	command |= CMD_RUN;
+	writel(command, &xhci->op_regs->command);
+	xhci_handshake(&xhci->op_regs->status, STS_HALT,
+		  0, 250 * 1000);
+
+	/* step 5: walk topology and initialize portsc,
+	 * portpmsc and portli
+	 */
+	/* this is done in bus_resume */
+
+	/* step 6: restart each of the previously
+	 * Running endpoints by ringing their doorbells
+	 */
+
+	spin_unlock_irq(&xhci->lock);
+
+	xhci_dbc_resume(xhci);
+
+ done:
+	if (retval == 0) {
+		/*
+		 * Resume roothubs only if there are pending events.
+		 * USB 3 devices resend U3 LFPS wake after a 100ms delay if
+		 * the first wake signalling failed, give it that chance.
+		 */
+		pending_portevent = xhci_pending_portevent(xhci);
+		if (!pending_portevent) {
+			msleep(120);
+			pending_portevent = xhci_pending_portevent(xhci);
+		}
+
+		if (pending_portevent) {
+			if (xhci->shared_hcd)
+				usb_hcd_resume_root_hub(xhci->shared_hcd);
+			usb_hcd_resume_root_hub(hcd);
+		}
+	}
+	/*
+	 * If system is subject to the Quirk, Compliance Mode Timer needs to
+	 * be re-initialized Always after a system resume. Ports are subject
+	 * to suffer the Compliance Mode issue again. It doesn't matter if
+	 * ports have entered previously to U0 before system's suspension.
+	 */
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running)
+		compliance_mode_recovery_timer_init(xhci);
+
+	if (xhci->quirks & XHCI_ASMEDIA_MODIFY_FLOWCONTROL)
+		usb_asmedia_modifyflowcontrol(to_pci_dev(hcd->self.controller));
+
+	/* Re-enable port polling. */
+	xhci_dbg(xhci, "%s: starting usb%d port polling.\n",
+		 __func__, hcd->self.busnum);
+	if (xhci->shared_hcd) {
+		set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+		usb_hcd_poll_rh_status(xhci->shared_hcd);
+	}
+	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	usb_hcd_poll_rh_status(hcd);
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(xhci_resume);
+#endif	/* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+static int xhci_map_temp_buffer(struct usb_hcd *hcd, struct urb *urb)
+{
+	void *temp;
+	int ret = 0;
+	unsigned int buf_len;
+	enum dma_data_direction dir;
+
+	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+	buf_len = urb->transfer_buffer_length;
+
+	temp = kzalloc_node(buf_len, GFP_ATOMIC,
+			    dev_to_node(hcd->self.sysdev));
+
+	if (usb_urb_dir_out(urb))
+		sg_pcopy_to_buffer(urb->sg, urb->num_sgs,
+				   temp, buf_len, 0);
+
+	urb->transfer_buffer = temp;
+	urb->transfer_dma = dma_map_single(hcd->self.sysdev,
+					   urb->transfer_buffer,
+					   urb->transfer_buffer_length,
+					   dir);
+
+	if (dma_mapping_error(hcd->self.sysdev,
+			      urb->transfer_dma)) {
+		ret = -EAGAIN;
+		kfree(temp);
+	} else {
+		urb->transfer_flags |= URB_DMA_MAP_SINGLE;
+	}
+
+	return ret;
+}
+
+static bool xhci_urb_temp_buffer_required(struct usb_hcd *hcd,
+					  struct urb *urb)
+{
+	bool ret = false;
+	unsigned int i;
+	unsigned int len = 0;
+	unsigned int trb_size;
+	unsigned int max_pkt;
+	struct scatterlist *sg;
+	struct scatterlist *tail_sg;
+
+	tail_sg = urb->sg;
+	max_pkt = usb_endpoint_maxp(&urb->ep->desc);
+
+	if (!urb->num_sgs)
+		return ret;
+
+	if (urb->dev->speed >= USB_SPEED_SUPER)
+		trb_size = TRB_CACHE_SIZE_SS;
+	else
+		trb_size = TRB_CACHE_SIZE_HS;
+
+	if (urb->transfer_buffer_length != 0 &&
+	    !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
+		for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+			len = len + sg->length;
+			if (i > trb_size - 2) {
+				len = len - tail_sg->length;
+				if (len < max_pkt) {
+					ret = true;
+					break;
+				}
+
+				tail_sg = sg_next(tail_sg);
+			}
+		}
+	}
+	return ret;
+}
+
+static void xhci_unmap_temp_buf(struct usb_hcd *hcd, struct urb *urb)
+{
+	unsigned int len;
+	unsigned int buf_len;
+	enum dma_data_direction dir;
+
+	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+	buf_len = urb->transfer_buffer_length;
+
+	if (IS_ENABLED(CONFIG_HAS_DMA) &&
+	    (urb->transfer_flags & URB_DMA_MAP_SINGLE))
+		dma_unmap_single(hcd->self.sysdev,
+				 urb->transfer_dma,
+				 urb->transfer_buffer_length,
+				 dir);
+
+	if (usb_urb_dir_in(urb)) {
+		len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs,
+					   urb->transfer_buffer,
+					   buf_len,
+					   0);
+		if (len != buf_len) {
+			xhci_dbg(hcd_to_xhci(hcd),
+				 "Copy from tmp buf to urb sg list failed\n");
+			urb->actual_length = len;
+		}
+	}
+	urb->transfer_flags &= ~URB_DMA_MAP_SINGLE;
+	kfree(urb->transfer_buffer);
+	urb->transfer_buffer = NULL;
+}
+
+/*
+ * Bypass the DMA mapping if URB is suitable for Immediate Transfer (IDT),
+ * we'll copy the actual data into the TRB address register. This is limited to
+ * transfers up to 8 bytes on output endpoints of any kind with wMaxPacketSize
+ * >= 8 bytes. If suitable for IDT only one Transfer TRB per TD is allowed.
+ */
+static int xhci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+				gfp_t mem_flags)
+{
+	struct xhci_hcd *xhci;
+
+	xhci = hcd_to_xhci(hcd);
+
+	if (xhci_urb_suitable_for_idt(urb))
+		return 0;
+
+	if (xhci->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK) {
+		if (xhci_urb_temp_buffer_required(hcd, urb))
+			return xhci_map_temp_buffer(hcd, urb);
+	}
+	return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+}
+
+static void xhci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	struct xhci_hcd *xhci;
+	bool unmap_temp_buf = false;
+
+	xhci = hcd_to_xhci(hcd);
+
+	if (urb->num_sgs && (urb->transfer_flags & URB_DMA_MAP_SINGLE))
+		unmap_temp_buf = true;
+
+	if ((xhci->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK) && unmap_temp_buf)
+		xhci_unmap_temp_buf(hcd, urb);
+	else
+		usb_hcd_unmap_urb_for_dma(hcd, urb);
+}
+
+/**
+ * xhci_get_endpoint_index - Used for passing endpoint bitmasks between the core and
+ * HCDs.  Find the index for an endpoint given its descriptor.  Use the return
+ * value to right shift 1 for the bitmask.
+ *
+ * Index  = (epnum * 2) + direction - 1,
+ * where direction = 0 for OUT, 1 for IN.
+ * For control endpoints, the IN index is used (OUT index is unused), so
+ * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2)
+ */
+unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc)
+{
+	unsigned int index;
+	if (usb_endpoint_xfer_control(desc))
+		index = (unsigned int) (usb_endpoint_num(desc)*2);
+	else
+		index = (unsigned int) (usb_endpoint_num(desc)*2) +
+			(usb_endpoint_dir_in(desc) ? 1 : 0) - 1;
+	return index;
+}
+EXPORT_SYMBOL_GPL(xhci_get_endpoint_index);
+
+/* The reverse operation to xhci_get_endpoint_index. Calculate the USB endpoint
+ * address from the XHCI endpoint index.
+ */
+static unsigned int xhci_get_endpoint_address(unsigned int ep_index)
+{
+	unsigned int number = DIV_ROUND_UP(ep_index, 2);
+	unsigned int direction = ep_index % 2 ? USB_DIR_OUT : USB_DIR_IN;
+	return direction | number;
+}
+
+/* Find the flag for this endpoint (for use in the control context).  Use the
+ * endpoint index to create a bitmask.  The slot context is bit 0, endpoint 0 is
+ * bit 1, etc.
+ */
+static unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc)
+{
+	return 1 << (xhci_get_endpoint_index(desc) + 1);
+}
+
+/* Compute the last valid endpoint context index.  Basically, this is the
+ * endpoint index plus one.  For slot contexts with more than valid endpoint,
+ * we find the most significant bit set in the added contexts flags.
+ * e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000
+ * fls(0b1000) = 4, but the endpoint context index is 3, so subtract one.
+ */
+unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
+{
+	return fls(added_ctxs) - 1;
+}
+
+/* Returns 1 if the arguments are OK;
+ * returns 0 this is a root hub; returns -EINVAL for NULL pointers.
+ */
+static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint *ep, int check_ep, bool check_virt_dev,
+		const char *func) {
+	struct xhci_hcd	*xhci;
+	struct xhci_virt_device	*virt_dev;
+
+	if (!hcd || (check_ep && !ep) || !udev) {
+		pr_debug("xHCI %s called with invalid args\n", func);
+		return -EINVAL;
+	}
+	if (!udev->parent) {
+		pr_debug("xHCI %s called for root hub\n", func);
+		return 0;
+	}
+
+	xhci = hcd_to_xhci(hcd);
+	if (check_virt_dev) {
+		if (!udev->slot_id || !xhci->devs[udev->slot_id]) {
+			xhci_dbg(xhci, "xHCI %s called with unaddressed device\n",
+					func);
+			return -EINVAL;
+		}
+
+		virt_dev = xhci->devs[udev->slot_id];
+		if (virt_dev->udev != udev) {
+			xhci_dbg(xhci, "xHCI %s called with udev and "
+					  "virt_dev does not match\n", func);
+			return -EINVAL;
+		}
+	}
+
+	if (xhci->xhc_state & XHCI_STATE_HALTED)
+		return -ENODEV;
+
+	return 1;
+}
+
+static int xhci_configure_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev, struct xhci_command *command,
+		bool ctx_change, bool must_succeed);
+
+/*
+ * Full speed devices may have a max packet size greater than 8 bytes, but the
+ * USB core doesn't know that until it reads the first 8 bytes of the
+ * descriptor.  If the usb_device's max packet size changes after that point,
+ * we need to issue an evaluate context command and wait on it.
+ */
+static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
+		unsigned int ep_index, struct urb *urb, gfp_t mem_flags)
+{
+	struct xhci_container_ctx *out_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_ep_ctx *ep_ctx;
+	struct xhci_command *command;
+	int max_packet_size;
+	int hw_max_packet_size;
+	int ret = 0;
+
+	out_ctx = xhci->devs[slot_id]->out_ctx;
+	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+	hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2));
+	max_packet_size = usb_endpoint_maxp(&urb->dev->ep0.desc);
+	if (hw_max_packet_size != max_packet_size) {
+		xhci_dbg_trace(xhci,  trace_xhci_dbg_context_change,
+				"Max Packet Size for ep 0 changed.");
+		xhci_dbg_trace(xhci,  trace_xhci_dbg_context_change,
+				"Max packet size in usb_device = %d",
+				max_packet_size);
+		xhci_dbg_trace(xhci,  trace_xhci_dbg_context_change,
+				"Max packet size in xHCI HW = %d",
+				hw_max_packet_size);
+		xhci_dbg_trace(xhci,  trace_xhci_dbg_context_change,
+				"Issuing evaluate context command.");
+
+		/* Set up the input context flags for the command */
+		/* FIXME: This won't work if a non-default control endpoint
+		 * changes max packet sizes.
+		 */
+
+		command = xhci_alloc_command(xhci, true, mem_flags);
+		if (!command)
+			return -ENOMEM;
+
+		command->in_ctx = xhci->devs[slot_id]->in_ctx;
+		ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+		if (!ctrl_ctx) {
+			xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+					__func__);
+			ret = -ENOMEM;
+			goto command_cleanup;
+		}
+		/* Set up the modified control endpoint 0 */
+		xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx,
+				xhci->devs[slot_id]->out_ctx, ep_index);
+
+		ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index);
+		ep_ctx->ep_info &= cpu_to_le32(~EP_STATE_MASK);/* must clear */
+		ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK);
+		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size));
+
+		ctrl_ctx->add_flags = cpu_to_le32(EP0_FLAG);
+		ctrl_ctx->drop_flags = 0;
+
+		ret = xhci_configure_endpoint(xhci, urb->dev, command,
+				true, false);
+
+		/* Clean up the input context for later use by bandwidth
+		 * functions.
+		 */
+		ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG);
+command_cleanup:
+		kfree(command->completion);
+		kfree(command);
+	}
+	return ret;
+}
+
+/*
+ * non-error returns are a promise to giveback() the urb later
+ * we drop ownership so next owner (or urb unlink) can get it
+ */
+static int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	unsigned long flags;
+	int ret = 0;
+	unsigned int slot_id, ep_index;
+	unsigned int *ep_state;
+	struct urb_priv	*urb_priv;
+	int num_tds;
+
+	if (!urb)
+		return -EINVAL;
+	ret = xhci_check_args(hcd, urb->dev, urb->ep,
+					true, true, __func__);
+	if (ret <= 0)
+		return ret ? ret : -EINVAL;
+
+	slot_id = urb->dev->slot_id;
+	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+	ep_state = &xhci->devs[slot_id]->eps[ep_index].ep_state;
+
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		return -ESHUTDOWN;
+
+	if (xhci->devs[slot_id]->flags & VDEV_PORT_ERROR) {
+		xhci_dbg(xhci, "Can't queue urb, port error, link inactive\n");
+		return -ENODEV;
+	}
+
+	if (usb_endpoint_xfer_isoc(&urb->ep->desc))
+		num_tds = urb->number_of_packets;
+	else if (usb_endpoint_is_bulk_out(&urb->ep->desc) &&
+	    urb->transfer_buffer_length > 0 &&
+	    urb->transfer_flags & URB_ZERO_PACKET &&
+	    !(urb->transfer_buffer_length % usb_endpoint_maxp(&urb->ep->desc)))
+		num_tds = 2;
+	else
+		num_tds = 1;
+
+	urb_priv = kzalloc(struct_size(urb_priv, td, num_tds), mem_flags);
+	if (!urb_priv)
+		return -ENOMEM;
+
+	urb_priv->num_tds = num_tds;
+	urb_priv->num_tds_done = 0;
+	urb->hcpriv = urb_priv;
+
+	trace_xhci_urb_enqueue(urb);
+
+	if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+		/* Check to see if the max packet size for the default control
+		 * endpoint changed during FS device enumeration
+		 */
+		if (urb->dev->speed == USB_SPEED_FULL) {
+			ret = xhci_check_maxpacket(xhci, slot_id,
+					ep_index, urb, mem_flags);
+			if (ret < 0) {
+				xhci_urb_free_priv(urb_priv);
+				urb->hcpriv = NULL;
+				return ret;
+			}
+		}
+	}
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	if (xhci->xhc_state & XHCI_STATE_DYING) {
+		xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for non-responsive xHCI host.\n",
+			 urb->ep->desc.bEndpointAddress, urb);
+		ret = -ESHUTDOWN;
+		goto free_priv;
+	}
+	if (*ep_state & (EP_GETTING_STREAMS | EP_GETTING_NO_STREAMS)) {
+		xhci_warn(xhci, "WARN: Can't enqueue URB, ep in streams transition state %x\n",
+			  *ep_state);
+		ret = -EINVAL;
+		goto free_priv;
+	}
+	if (*ep_state & EP_SOFT_CLEAR_TOGGLE) {
+		xhci_warn(xhci, "Can't enqueue URB while manually clearing toggle\n");
+		ret = -EINVAL;
+		goto free_priv;
+	}
+
+	switch (usb_endpoint_type(&urb->ep->desc)) {
+
+	case USB_ENDPOINT_XFER_CONTROL:
+		ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
+					 slot_id, ep_index);
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
+					 slot_id, ep_index);
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb,
+				slot_id, ep_index);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb,
+				slot_id, ep_index);
+	}
+
+	if (ret) {
+free_priv:
+		xhci_urb_free_priv(urb_priv);
+		urb->hcpriv = NULL;
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return ret;
+}
+
+/*
+ * Remove the URB's TD from the endpoint ring.  This may cause the HC to stop
+ * USB transfers, potentially stopping in the middle of a TRB buffer.  The HC
+ * should pick up where it left off in the TD, unless a Set Transfer Ring
+ * Dequeue Pointer is issued.
+ *
+ * The TRBs that make up the buffers for the canceled URB will be "removed" from
+ * the ring.  Since the ring is a contiguous structure, they can't be physically
+ * removed.  Instead, there are two options:
+ *
+ *  1) If the HC is in the middle of processing the URB to be canceled, we
+ *     simply move the ring's dequeue pointer past those TRBs using the Set
+ *     Transfer Ring Dequeue Pointer command.  This will be the common case,
+ *     when drivers timeout on the last submitted URB and attempt to cancel.
+ *
+ *  2) If the HC is in the middle of a different TD, we turn the TRBs into a
+ *     series of 1-TRB transfer no-op TDs.  (No-ops shouldn't be chained.)  The
+ *     HC will need to invalidate the any TRBs it has cached after the stop
+ *     endpoint command, as noted in the xHCI 0.95 errata.
+ *
+ *  3) The TD may have completed by the time the Stop Endpoint Command
+ *     completes, so software needs to handle that case too.
+ *
+ * This function should protect against the TD enqueueing code ringing the
+ * doorbell while this code is waiting for a Stop Endpoint command to complete.
+ * It also needs to account for multiple cancellations on happening at the same
+ * time for the same endpoint.
+ *
+ * Note that this function can be called in any context, or so says
+ * usb_hcd_unlink_urb()
+ */
+static int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	unsigned long flags;
+	int ret, i;
+	u32 temp;
+	struct xhci_hcd *xhci;
+	struct urb_priv	*urb_priv;
+	struct xhci_td *td;
+	unsigned int ep_index;
+	struct xhci_ring *ep_ring;
+	struct xhci_virt_ep *ep;
+	struct xhci_command *command;
+	struct xhci_virt_device *vdev;
+
+	xhci = hcd_to_xhci(hcd);
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	trace_xhci_urb_dequeue(urb);
+
+	/* Make sure the URB hasn't completed or been unlinked already */
+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (ret)
+		goto done;
+
+	/* give back URB now if we can't queue it for cancel */
+	vdev = xhci->devs[urb->dev->slot_id];
+	urb_priv = urb->hcpriv;
+	if (!vdev || !urb_priv)
+		goto err_giveback;
+
+	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+	ep = &vdev->eps[ep_index];
+	ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
+	if (!ep || !ep_ring)
+		goto err_giveback;
+
+	/* If xHC is dead take it down and return ALL URBs in xhci_hc_died() */
+	temp = readl(&xhci->op_regs->status);
+	if (temp == ~(u32)0 || xhci->xhc_state & XHCI_STATE_DYING) {
+		xhci_hc_died(xhci);
+		goto done;
+	}
+
+	/*
+	 * check ring is not re-allocated since URB was enqueued. If it is, then
+	 * make sure none of the ring related pointers in this URB private data
+	 * are touched, such as td_list, otherwise we overwrite freed data
+	 */
+	if (!td_on_ring(&urb_priv->td[0], ep_ring)) {
+		xhci_err(xhci, "Canceled URB td not found on endpoint ring");
+		for (i = urb_priv->num_tds_done; i < urb_priv->num_tds; i++) {
+			td = &urb_priv->td[i];
+			if (!list_empty(&td->cancelled_td_list))
+				list_del_init(&td->cancelled_td_list);
+		}
+		goto err_giveback;
+	}
+
+	if (xhci->xhc_state & XHCI_STATE_HALTED) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
+				"HC halted, freeing TD manually.");
+		for (i = urb_priv->num_tds_done;
+		     i < urb_priv->num_tds;
+		     i++) {
+			td = &urb_priv->td[i];
+			if (!list_empty(&td->td_list))
+				list_del_init(&td->td_list);
+			if (!list_empty(&td->cancelled_td_list))
+				list_del_init(&td->cancelled_td_list);
+		}
+		goto err_giveback;
+	}
+
+	i = urb_priv->num_tds_done;
+	if (i < urb_priv->num_tds)
+		xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
+				"Cancel URB %p, dev %s, ep 0x%x, "
+				"starting at offset 0x%llx",
+				urb, urb->dev->devpath,
+				urb->ep->desc.bEndpointAddress,
+				(unsigned long long) xhci_trb_virt_to_dma(
+					urb_priv->td[i].start_seg,
+					urb_priv->td[i].first_trb));
+
+	for (; i < urb_priv->num_tds; i++) {
+		td = &urb_priv->td[i];
+		/* TD can already be on cancelled list if ep halted on it */
+		if (list_empty(&td->cancelled_td_list)) {
+			td->cancel_status = TD_DIRTY;
+			list_add_tail(&td->cancelled_td_list,
+				      &ep->cancelled_td_list);
+		}
+	}
+
+	/* Queue a stop endpoint command, but only if this is
+	 * the first cancellation to be handled.
+	 */
+	if (!(ep->ep_state & EP_STOP_CMD_PENDING)) {
+		command = xhci_alloc_command(xhci, false, GFP_ATOMIC);
+		if (!command) {
+			ret = -ENOMEM;
+			goto done;
+		}
+		ep->ep_state |= EP_STOP_CMD_PENDING;
+		xhci_queue_stop_endpoint(xhci, command, urb->dev->slot_id,
+					 ep_index, 0);
+		xhci_ring_cmd_db(xhci);
+	}
+done:
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return ret;
+
+err_giveback:
+	if (urb_priv)
+		xhci_urb_free_priv(urb_priv);
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	usb_hcd_giveback_urb(hcd, urb, -ESHUTDOWN);
+	return ret;
+}
+
+/* Drop an endpoint from a new bandwidth configuration for this device.
+ * Only one call to this function is allowed per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+ * add the endpoint to the schedule with possibly new parameters denoted by a
+ * different endpoint descriptor in usb_host_endpoint.
+ * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+ * not allowed.
+ *
+ * The USB core will not allow URBs to be queued to an endpoint that is being
+ * disabled, so there's no need for mutual exclusion to protect
+ * the xhci->devs[slot_id] structure.
+ */
+int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+		       struct usb_host_endpoint *ep)
+{
+	struct xhci_hcd *xhci;
+	struct xhci_container_ctx *in_ctx, *out_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	unsigned int ep_index;
+	struct xhci_ep_ctx *ep_ctx;
+	u32 drop_flag;
+	u32 new_add_flags, new_drop_flags;
+	int ret;
+
+	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
+	if (ret <= 0)
+		return ret;
+	xhci = hcd_to_xhci(hcd);
+	if (xhci->xhc_state & XHCI_STATE_DYING)
+		return -ENODEV;
+
+	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+	drop_flag = xhci_get_endpoint_flag(&ep->desc);
+	if (drop_flag == SLOT_FLAG || drop_flag == EP0_FLAG) {
+		xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n",
+				__func__, drop_flag);
+		return 0;
+	}
+
+	in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+	out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+	ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		return 0;
+	}
+
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+	/* If the HC already knows the endpoint is disabled,
+	 * or the HCD has noted it is disabled, ignore this request
+	 */
+	if ((GET_EP_CTX_STATE(ep_ctx) == EP_STATE_DISABLED) ||
+	    le32_to_cpu(ctrl_ctx->drop_flags) &
+	    xhci_get_endpoint_flag(&ep->desc)) {
+		/* Do not warn when called after a usb_device_reset */
+		if (xhci->devs[udev->slot_id]->eps[ep_index].ring != NULL)
+			xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
+				  __func__, ep);
+		return 0;
+	}
+
+	ctrl_ctx->drop_flags |= cpu_to_le32(drop_flag);
+	new_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags);
+
+	ctrl_ctx->add_flags &= cpu_to_le32(~drop_flag);
+	new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
+
+	xhci_debugfs_remove_endpoint(xhci, xhci->devs[udev->slot_id], ep_index);
+
+	xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
+
+	xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
+			(unsigned int) ep->desc.bEndpointAddress,
+			udev->slot_id,
+			(unsigned int) new_drop_flags,
+			(unsigned int) new_add_flags);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xhci_drop_endpoint);
+
+/* Add an endpoint to a new possible bandwidth configuration for this device.
+ * Only one call to this function is allowed per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+ * add the endpoint to the schedule with possibly new parameters denoted by a
+ * different endpoint descriptor in usb_host_endpoint.
+ * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+ * not allowed.
+ *
+ * The USB core will not allow URBs to be queued to an endpoint until the
+ * configuration or alt setting is installed in the device, so there's no need
+ * for mutual exclusion to protect the xhci->devs[slot_id] structure.
+ */
+int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+		      struct usb_host_endpoint *ep)
+{
+	struct xhci_hcd *xhci;
+	struct xhci_container_ctx *in_ctx;
+	unsigned int ep_index;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_ep_ctx *ep_ctx;
+	u32 added_ctxs;
+	u32 new_add_flags, new_drop_flags;
+	struct xhci_virt_device *virt_dev;
+	int ret = 0;
+
+	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
+	if (ret <= 0) {
+		/* So we won't queue a reset ep command for a root hub */
+		ep->hcpriv = NULL;
+		return ret;
+	}
+	xhci = hcd_to_xhci(hcd);
+	if (xhci->xhc_state & XHCI_STATE_DYING)
+		return -ENODEV;
+
+	added_ctxs = xhci_get_endpoint_flag(&ep->desc);
+	if (added_ctxs == SLOT_FLAG || added_ctxs == EP0_FLAG) {
+		/* FIXME when we have to issue an evaluate endpoint command to
+		 * deal with ep0 max packet size changing once we get the
+		 * descriptors
+		 */
+		xhci_dbg(xhci, "xHCI %s - can't add slot or ep 0 %#x\n",
+				__func__, added_ctxs);
+		return 0;
+	}
+
+	virt_dev = xhci->devs[udev->slot_id];
+	in_ctx = virt_dev->in_ctx;
+	ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		return 0;
+	}
+
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	/* If this endpoint is already in use, and the upper layers are trying
+	 * to add it again without dropping it, reject the addition.
+	 */
+	if (virt_dev->eps[ep_index].ring &&
+			!(le32_to_cpu(ctrl_ctx->drop_flags) & added_ctxs)) {
+		xhci_warn(xhci, "Trying to add endpoint 0x%x "
+				"without dropping it.\n",
+				(unsigned int) ep->desc.bEndpointAddress);
+		return -EINVAL;
+	}
+
+	/* If the HCD has already noted the endpoint is enabled,
+	 * ignore this request.
+	 */
+	if (le32_to_cpu(ctrl_ctx->add_flags) & added_ctxs) {
+		xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
+				__func__, ep);
+		return 0;
+	}
+
+	/*
+	 * Configuration and alternate setting changes must be done in
+	 * process context, not interrupt context (or so documenation
+	 * for usb_set_interface() and usb_set_configuration() claim).
+	 */
+	if (xhci_endpoint_init(xhci, virt_dev, udev, ep, GFP_NOIO) < 0) {
+		dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n",
+				__func__, ep->desc.bEndpointAddress);
+		return -ENOMEM;
+	}
+
+	ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
+	new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
+
+	/* If xhci_endpoint_disable() was called for this endpoint, but the
+	 * xHC hasn't been notified yet through the check_bandwidth() call,
+	 * this re-adds a new state for the endpoint from the new endpoint
+	 * descriptors.  We must drop and re-add this endpoint, so we leave the
+	 * drop flags alone.
+	 */
+	new_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags);
+
+	/* Store the usb_device pointer for later use */
+	ep->hcpriv = udev;
+
+	ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
+	trace_xhci_add_endpoint(ep_ctx);
+
+	xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
+			(unsigned int) ep->desc.bEndpointAddress,
+			udev->slot_id,
+			(unsigned int) new_drop_flags,
+			(unsigned int) new_add_flags);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xhci_add_endpoint);
+
+static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev)
+{
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_ep_ctx *ep_ctx;
+	struct xhci_slot_ctx *slot_ctx;
+	int i;
+
+	ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		return;
+	}
+
+	/* When a device's add flag and drop flag are zero, any subsequent
+	 * configure endpoint command will leave that endpoint's state
+	 * untouched.  Make sure we don't leave any old state in the input
+	 * endpoint contexts.
+	 */
+	ctrl_ctx->drop_flags = 0;
+	ctrl_ctx->add_flags = 0;
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+	slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
+	/* Endpoint 0 is always valid */
+	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1));
+	for (i = 1; i < 31; i++) {
+		ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i);
+		ep_ctx->ep_info = 0;
+		ep_ctx->ep_info2 = 0;
+		ep_ctx->deq = 0;
+		ep_ctx->tx_info = 0;
+	}
+}
+
+static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
+		struct usb_device *udev, u32 *cmd_status)
+{
+	int ret;
+
+	switch (*cmd_status) {
+	case COMP_COMMAND_ABORTED:
+	case COMP_COMMAND_RING_STOPPED:
+		xhci_warn(xhci, "Timeout while waiting for configure endpoint command\n");
+		ret = -ETIME;
+		break;
+	case COMP_RESOURCE_ERROR:
+		dev_warn(&udev->dev,
+			 "Not enough host controller resources for new device state.\n");
+		ret = -ENOMEM;
+		/* FIXME: can we allocate more resources for the HC? */
+		break;
+	case COMP_BANDWIDTH_ERROR:
+	case COMP_SECONDARY_BANDWIDTH_ERROR:
+		dev_warn(&udev->dev,
+			 "Not enough bandwidth for new device state.\n");
+		ret = -ENOSPC;
+		/* FIXME: can we go back to the old state? */
+		break;
+	case COMP_TRB_ERROR:
+		/* the HCD set up something wrong */
+		dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, "
+				"add flag = 1, "
+				"and endpoint is not disabled.\n");
+		ret = -EINVAL;
+		break;
+	case COMP_INCOMPATIBLE_DEVICE_ERROR:
+		dev_warn(&udev->dev,
+			 "ERROR: Incompatible device for endpoint configure command.\n");
+		ret = -ENODEV;
+		break;
+	case COMP_SUCCESS:
+		xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+				"Successful Endpoint Configure command");
+		ret = 0;
+		break;
+	default:
+		xhci_err(xhci, "ERROR: unexpected command completion code 0x%x.\n",
+				*cmd_status);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
+		struct usb_device *udev, u32 *cmd_status)
+{
+	int ret;
+
+	switch (*cmd_status) {
+	case COMP_COMMAND_ABORTED:
+	case COMP_COMMAND_RING_STOPPED:
+		xhci_warn(xhci, "Timeout while waiting for evaluate context command\n");
+		ret = -ETIME;
+		break;
+	case COMP_PARAMETER_ERROR:
+		dev_warn(&udev->dev,
+			 "WARN: xHCI driver setup invalid evaluate context command.\n");
+		ret = -EINVAL;
+		break;
+	case COMP_SLOT_NOT_ENABLED_ERROR:
+		dev_warn(&udev->dev,
+			"WARN: slot not enabled for evaluate context command.\n");
+		ret = -EINVAL;
+		break;
+	case COMP_CONTEXT_STATE_ERROR:
+		dev_warn(&udev->dev,
+			"WARN: invalid context state for evaluate context command.\n");
+		ret = -EINVAL;
+		break;
+	case COMP_INCOMPATIBLE_DEVICE_ERROR:
+		dev_warn(&udev->dev,
+			"ERROR: Incompatible device for evaluate context command.\n");
+		ret = -ENODEV;
+		break;
+	case COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR:
+		/* Max Exit Latency too large error */
+		dev_warn(&udev->dev, "WARN: Max Exit Latency too large\n");
+		ret = -EINVAL;
+		break;
+	case COMP_SUCCESS:
+		xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+				"Successful evaluate context command");
+		ret = 0;
+		break;
+	default:
+		xhci_err(xhci, "ERROR: unexpected command completion code 0x%x.\n",
+			*cmd_status);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static u32 xhci_count_num_new_endpoints(struct xhci_hcd *xhci,
+		struct xhci_input_control_ctx *ctrl_ctx)
+{
+	u32 valid_add_flags;
+	u32 valid_drop_flags;
+
+	/* Ignore the slot flag (bit 0), and the default control endpoint flag
+	 * (bit 1).  The default control endpoint is added during the Address
+	 * Device command and is never removed until the slot is disabled.
+	 */
+	valid_add_flags = le32_to_cpu(ctrl_ctx->add_flags) >> 2;
+	valid_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags) >> 2;
+
+	/* Use hweight32 to count the number of ones in the add flags, or
+	 * number of endpoints added.  Don't count endpoints that are changed
+	 * (both added and dropped).
+	 */
+	return hweight32(valid_add_flags) -
+		hweight32(valid_add_flags & valid_drop_flags);
+}
+
+static unsigned int xhci_count_num_dropped_endpoints(struct xhci_hcd *xhci,
+		struct xhci_input_control_ctx *ctrl_ctx)
+{
+	u32 valid_add_flags;
+	u32 valid_drop_flags;
+
+	valid_add_flags = le32_to_cpu(ctrl_ctx->add_flags) >> 2;
+	valid_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags) >> 2;
+
+	return hweight32(valid_drop_flags) -
+		hweight32(valid_add_flags & valid_drop_flags);
+}
+
+/*
+ * We need to reserve the new number of endpoints before the configure endpoint
+ * command completes.  We can't subtract the dropped endpoints from the number
+ * of active endpoints until the command completes because we can oversubscribe
+ * the host in this case:
+ *
+ *  - the first configure endpoint command drops more endpoints than it adds
+ *  - a second configure endpoint command that adds more endpoints is queued
+ *  - the first configure endpoint command fails, so the config is unchanged
+ *  - the second command may succeed, even though there isn't enough resources
+ *
+ * Must be called with xhci->lock held.
+ */
+static int xhci_reserve_host_resources(struct xhci_hcd *xhci,
+		struct xhci_input_control_ctx *ctrl_ctx)
+{
+	u32 added_eps;
+
+	added_eps = xhci_count_num_new_endpoints(xhci, ctrl_ctx);
+	if (xhci->num_active_eps + added_eps > xhci->limit_active_eps) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Not enough ep ctxs: "
+				"%u active, need to add %u, limit is %u.",
+				xhci->num_active_eps, added_eps,
+				xhci->limit_active_eps);
+		return -ENOMEM;
+	}
+	xhci->num_active_eps += added_eps;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+			"Adding %u ep ctxs, %u now active.", added_eps,
+			xhci->num_active_eps);
+	return 0;
+}
+
+/*
+ * The configure endpoint was failed by the xHC for some other reason, so we
+ * need to revert the resources that failed configuration would have used.
+ *
+ * Must be called with xhci->lock held.
+ */
+static void xhci_free_host_resources(struct xhci_hcd *xhci,
+		struct xhci_input_control_ctx *ctrl_ctx)
+{
+	u32 num_failed_eps;
+
+	num_failed_eps = xhci_count_num_new_endpoints(xhci, ctrl_ctx);
+	xhci->num_active_eps -= num_failed_eps;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+			"Removing %u failed ep ctxs, %u now active.",
+			num_failed_eps,
+			xhci->num_active_eps);
+}
+
+/*
+ * Now that the command has completed, clean up the active endpoint count by
+ * subtracting out the endpoints that were dropped (but not changed).
+ *
+ * Must be called with xhci->lock held.
+ */
+static void xhci_finish_resource_reservation(struct xhci_hcd *xhci,
+		struct xhci_input_control_ctx *ctrl_ctx)
+{
+	u32 num_dropped_eps;
+
+	num_dropped_eps = xhci_count_num_dropped_endpoints(xhci, ctrl_ctx);
+	xhci->num_active_eps -= num_dropped_eps;
+	if (num_dropped_eps)
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Removing %u dropped ep ctxs, %u now active.",
+				num_dropped_eps,
+				xhci->num_active_eps);
+}
+
+static unsigned int xhci_get_block_size(struct usb_device *udev)
+{
+	switch (udev->speed) {
+	case USB_SPEED_LOW:
+	case USB_SPEED_FULL:
+		return FS_BLOCK;
+	case USB_SPEED_HIGH:
+		return HS_BLOCK;
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+		return SS_BLOCK;
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_WIRELESS:
+	default:
+		/* Should never happen */
+		return 1;
+	}
+}
+
+static unsigned int
+xhci_get_largest_overhead(struct xhci_interval_bw *interval_bw)
+{
+	if (interval_bw->overhead[LS_OVERHEAD_TYPE])
+		return LS_OVERHEAD;
+	if (interval_bw->overhead[FS_OVERHEAD_TYPE])
+		return FS_OVERHEAD;
+	return HS_OVERHEAD;
+}
+
+/* If we are changing a LS/FS device under a HS hub,
+ * make sure (if we are activating a new TT) that the HS bus has enough
+ * bandwidth for this new TT.
+ */
+static int xhci_check_tt_bw_table(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int old_active_eps)
+{
+	struct xhci_interval_bw_table *bw_table;
+	struct xhci_tt_bw_info *tt_info;
+
+	/* Find the bandwidth table for the root port this TT is attached to. */
+	bw_table = &xhci->rh_bw[virt_dev->real_port - 1].bw_table;
+	tt_info = virt_dev->tt_info;
+	/* If this TT already had active endpoints, the bandwidth for this TT
+	 * has already been added.  Removing all periodic endpoints (and thus
+	 * making the TT enactive) will only decrease the bandwidth used.
+	 */
+	if (old_active_eps)
+		return 0;
+	if (old_active_eps == 0 && tt_info->active_eps != 0) {
+		if (bw_table->bw_used + TT_HS_OVERHEAD > HS_BW_LIMIT)
+			return -ENOMEM;
+		return 0;
+	}
+	/* Not sure why we would have no new active endpoints...
+	 *
+	 * Maybe because of an Evaluate Context change for a hub update or a
+	 * control endpoint 0 max packet size change?
+	 * FIXME: skip the bandwidth calculation in that case.
+	 */
+	return 0;
+}
+
+static int xhci_check_ss_bw(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev)
+{
+	unsigned int bw_reserved;
+
+	bw_reserved = DIV_ROUND_UP(SS_BW_RESERVED*SS_BW_LIMIT_IN, 100);
+	if (virt_dev->bw_table->ss_bw_in > (SS_BW_LIMIT_IN - bw_reserved))
+		return -ENOMEM;
+
+	bw_reserved = DIV_ROUND_UP(SS_BW_RESERVED*SS_BW_LIMIT_OUT, 100);
+	if (virt_dev->bw_table->ss_bw_out > (SS_BW_LIMIT_OUT - bw_reserved))
+		return -ENOMEM;
+
+	return 0;
+}
+
+/*
+ * This algorithm is a very conservative estimate of the worst-case scheduling
+ * scenario for any one interval.  The hardware dynamically schedules the
+ * packets, so we can't tell which microframe could be the limiting factor in
+ * the bandwidth scheduling.  This only takes into account periodic endpoints.
+ *
+ * Obviously, we can't solve an NP complete problem to find the minimum worst
+ * case scenario.  Instead, we come up with an estimate that is no less than
+ * the worst case bandwidth used for any one microframe, but may be an
+ * over-estimate.
+ *
+ * We walk the requirements for each endpoint by interval, starting with the
+ * smallest interval, and place packets in the schedule where there is only one
+ * possible way to schedule packets for that interval.  In order to simplify
+ * this algorithm, we record the largest max packet size for each interval, and
+ * assume all packets will be that size.
+ *
+ * For interval 0, we obviously must schedule all packets for each interval.
+ * The bandwidth for interval 0 is just the amount of data to be transmitted
+ * (the sum of all max ESIT payload sizes, plus any overhead per packet times
+ * the number of packets).
+ *
+ * For interval 1, we have two possible microframes to schedule those packets
+ * in.  For this algorithm, if we can schedule the same number of packets for
+ * each possible scheduling opportunity (each microframe), we will do so.  The
+ * remaining number of packets will be saved to be transmitted in the gaps in
+ * the next interval's scheduling sequence.
+ *
+ * As we move those remaining packets to be scheduled with interval 2 packets,
+ * we have to double the number of remaining packets to transmit.  This is
+ * because the intervals are actually powers of 2, and we would be transmitting
+ * the previous interval's packets twice in this interval.  We also have to be
+ * sure that when we look at the largest max packet size for this interval, we
+ * also look at the largest max packet size for the remaining packets and take
+ * the greater of the two.
+ *
+ * The algorithm continues to evenly distribute packets in each scheduling
+ * opportunity, and push the remaining packets out, until we get to the last
+ * interval.  Then those packets and their associated overhead are just added
+ * to the bandwidth used.
+ */
+static int xhci_check_bw_table(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int old_active_eps)
+{
+	unsigned int bw_reserved;
+	unsigned int max_bandwidth;
+	unsigned int bw_used;
+	unsigned int block_size;
+	struct xhci_interval_bw_table *bw_table;
+	unsigned int packet_size = 0;
+	unsigned int overhead = 0;
+	unsigned int packets_transmitted = 0;
+	unsigned int packets_remaining = 0;
+	unsigned int i;
+
+	if (virt_dev->udev->speed >= USB_SPEED_SUPER)
+		return xhci_check_ss_bw(xhci, virt_dev);
+
+	if (virt_dev->udev->speed == USB_SPEED_HIGH) {
+		max_bandwidth = HS_BW_LIMIT;
+		/* Convert percent of bus BW reserved to blocks reserved */
+		bw_reserved = DIV_ROUND_UP(HS_BW_RESERVED * max_bandwidth, 100);
+	} else {
+		max_bandwidth = FS_BW_LIMIT;
+		bw_reserved = DIV_ROUND_UP(FS_BW_RESERVED * max_bandwidth, 100);
+	}
+
+	bw_table = virt_dev->bw_table;
+	/* We need to translate the max packet size and max ESIT payloads into
+	 * the units the hardware uses.
+	 */
+	block_size = xhci_get_block_size(virt_dev->udev);
+
+	/* If we are manipulating a LS/FS device under a HS hub, double check
+	 * that the HS bus has enough bandwidth if we are activing a new TT.
+	 */
+	if (virt_dev->tt_info) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Recalculating BW for rootport %u",
+				virt_dev->real_port);
+		if (xhci_check_tt_bw_table(xhci, virt_dev, old_active_eps)) {
+			xhci_warn(xhci, "Not enough bandwidth on HS bus for "
+					"newly activated TT.\n");
+			return -ENOMEM;
+		}
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Recalculating BW for TT slot %u port %u",
+				virt_dev->tt_info->slot_id,
+				virt_dev->tt_info->ttport);
+	} else {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Recalculating BW for rootport %u",
+				virt_dev->real_port);
+	}
+
+	/* Add in how much bandwidth will be used for interval zero, or the
+	 * rounded max ESIT payload + number of packets * largest overhead.
+	 */
+	bw_used = DIV_ROUND_UP(bw_table->interval0_esit_payload, block_size) +
+		bw_table->interval_bw[0].num_packets *
+		xhci_get_largest_overhead(&bw_table->interval_bw[0]);
+
+	for (i = 1; i < XHCI_MAX_INTERVAL; i++) {
+		unsigned int bw_added;
+		unsigned int largest_mps;
+		unsigned int interval_overhead;
+
+		/*
+		 * How many packets could we transmit in this interval?
+		 * If packets didn't fit in the previous interval, we will need
+		 * to transmit that many packets twice within this interval.
+		 */
+		packets_remaining = 2 * packets_remaining +
+			bw_table->interval_bw[i].num_packets;
+
+		/* Find the largest max packet size of this or the previous
+		 * interval.
+		 */
+		if (list_empty(&bw_table->interval_bw[i].endpoints))
+			largest_mps = 0;
+		else {
+			struct xhci_virt_ep *virt_ep;
+			struct list_head *ep_entry;
+
+			ep_entry = bw_table->interval_bw[i].endpoints.next;
+			virt_ep = list_entry(ep_entry,
+					struct xhci_virt_ep, bw_endpoint_list);
+			/* Convert to blocks, rounding up */
+			largest_mps = DIV_ROUND_UP(
+					virt_ep->bw_info.max_packet_size,
+					block_size);
+		}
+		if (largest_mps > packet_size)
+			packet_size = largest_mps;
+
+		/* Use the larger overhead of this or the previous interval. */
+		interval_overhead = xhci_get_largest_overhead(
+				&bw_table->interval_bw[i]);
+		if (interval_overhead > overhead)
+			overhead = interval_overhead;
+
+		/* How many packets can we evenly distribute across
+		 * (1 << (i + 1)) possible scheduling opportunities?
+		 */
+		packets_transmitted = packets_remaining >> (i + 1);
+
+		/* Add in the bandwidth used for those scheduled packets */
+		bw_added = packets_transmitted * (overhead + packet_size);
+
+		/* How many packets do we have remaining to transmit? */
+		packets_remaining = packets_remaining % (1 << (i + 1));
+
+		/* What largest max packet size should those packets have? */
+		/* If we've transmitted all packets, don't carry over the
+		 * largest packet size.
+		 */
+		if (packets_remaining == 0) {
+			packet_size = 0;
+			overhead = 0;
+		} else if (packets_transmitted > 0) {
+			/* Otherwise if we do have remaining packets, and we've
+			 * scheduled some packets in this interval, take the
+			 * largest max packet size from endpoints with this
+			 * interval.
+			 */
+			packet_size = largest_mps;
+			overhead = interval_overhead;
+		}
+		/* Otherwise carry over packet_size and overhead from the last
+		 * time we had a remainder.
+		 */
+		bw_used += bw_added;
+		if (bw_used > max_bandwidth) {
+			xhci_warn(xhci, "Not enough bandwidth. "
+					"Proposed: %u, Max: %u\n",
+				bw_used, max_bandwidth);
+			return -ENOMEM;
+		}
+	}
+	/*
+	 * Ok, we know we have some packets left over after even-handedly
+	 * scheduling interval 15.  We don't know which microframes they will
+	 * fit into, so we over-schedule and say they will be scheduled every
+	 * microframe.
+	 */
+	if (packets_remaining > 0)
+		bw_used += overhead + packet_size;
+
+	if (!virt_dev->tt_info && virt_dev->udev->speed == USB_SPEED_HIGH) {
+		unsigned int port_index = virt_dev->real_port - 1;
+
+		/* OK, we're manipulating a HS device attached to a
+		 * root port bandwidth domain.  Include the number of active TTs
+		 * in the bandwidth used.
+		 */
+		bw_used += TT_HS_OVERHEAD *
+			xhci->rh_bw[port_index].num_active_tts;
+	}
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+		"Final bandwidth: %u, Limit: %u, Reserved: %u, "
+		"Available: %u " "percent",
+		bw_used, max_bandwidth, bw_reserved,
+		(max_bandwidth - bw_used - bw_reserved) * 100 /
+		max_bandwidth);
+
+	bw_used += bw_reserved;
+	if (bw_used > max_bandwidth) {
+		xhci_warn(xhci, "Not enough bandwidth. Proposed: %u, Max: %u\n",
+				bw_used, max_bandwidth);
+		return -ENOMEM;
+	}
+
+	bw_table->bw_used = bw_used;
+	return 0;
+}
+
+static bool xhci_is_async_ep(unsigned int ep_type)
+{
+	return (ep_type != ISOC_OUT_EP && ep_type != INT_OUT_EP &&
+					ep_type != ISOC_IN_EP &&
+					ep_type != INT_IN_EP);
+}
+
+static bool xhci_is_sync_in_ep(unsigned int ep_type)
+{
+	return (ep_type == ISOC_IN_EP || ep_type == INT_IN_EP);
+}
+
+static unsigned int xhci_get_ss_bw_consumed(struct xhci_bw_info *ep_bw)
+{
+	unsigned int mps = DIV_ROUND_UP(ep_bw->max_packet_size, SS_BLOCK);
+
+	if (ep_bw->ep_interval == 0)
+		return SS_OVERHEAD_BURST +
+			(ep_bw->mult * ep_bw->num_packets *
+					(SS_OVERHEAD + mps));
+	return DIV_ROUND_UP(ep_bw->mult * ep_bw->num_packets *
+				(SS_OVERHEAD + mps + SS_OVERHEAD_BURST),
+				1 << ep_bw->ep_interval);
+
+}
+
+static void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci,
+		struct xhci_bw_info *ep_bw,
+		struct xhci_interval_bw_table *bw_table,
+		struct usb_device *udev,
+		struct xhci_virt_ep *virt_ep,
+		struct xhci_tt_bw_info *tt_info)
+{
+	struct xhci_interval_bw	*interval_bw;
+	int normalized_interval;
+
+	if (xhci_is_async_ep(ep_bw->type))
+		return;
+
+	if (udev->speed >= USB_SPEED_SUPER) {
+		if (xhci_is_sync_in_ep(ep_bw->type))
+			xhci->devs[udev->slot_id]->bw_table->ss_bw_in -=
+				xhci_get_ss_bw_consumed(ep_bw);
+		else
+			xhci->devs[udev->slot_id]->bw_table->ss_bw_out -=
+				xhci_get_ss_bw_consumed(ep_bw);
+		return;
+	}
+
+	/* SuperSpeed endpoints never get added to intervals in the table, so
+	 * this check is only valid for HS/FS/LS devices.
+	 */
+	if (list_empty(&virt_ep->bw_endpoint_list))
+		return;
+	/* For LS/FS devices, we need to translate the interval expressed in
+	 * microframes to frames.
+	 */
+	if (udev->speed == USB_SPEED_HIGH)
+		normalized_interval = ep_bw->ep_interval;
+	else
+		normalized_interval = ep_bw->ep_interval - 3;
+
+	if (normalized_interval == 0)
+		bw_table->interval0_esit_payload -= ep_bw->max_esit_payload;
+	interval_bw = &bw_table->interval_bw[normalized_interval];
+	interval_bw->num_packets -= ep_bw->num_packets;
+	switch (udev->speed) {
+	case USB_SPEED_LOW:
+		interval_bw->overhead[LS_OVERHEAD_TYPE] -= 1;
+		break;
+	case USB_SPEED_FULL:
+		interval_bw->overhead[FS_OVERHEAD_TYPE] -= 1;
+		break;
+	case USB_SPEED_HIGH:
+		interval_bw->overhead[HS_OVERHEAD_TYPE] -= 1;
+		break;
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_WIRELESS:
+		/* Should never happen because only LS/FS/HS endpoints will get
+		 * added to the endpoint list.
+		 */
+		return;
+	}
+	if (tt_info)
+		tt_info->active_eps -= 1;
+	list_del_init(&virt_ep->bw_endpoint_list);
+}
+
+static void xhci_add_ep_to_interval_table(struct xhci_hcd *xhci,
+		struct xhci_bw_info *ep_bw,
+		struct xhci_interval_bw_table *bw_table,
+		struct usb_device *udev,
+		struct xhci_virt_ep *virt_ep,
+		struct xhci_tt_bw_info *tt_info)
+{
+	struct xhci_interval_bw	*interval_bw;
+	struct xhci_virt_ep *smaller_ep;
+	int normalized_interval;
+
+	if (xhci_is_async_ep(ep_bw->type))
+		return;
+
+	if (udev->speed == USB_SPEED_SUPER) {
+		if (xhci_is_sync_in_ep(ep_bw->type))
+			xhci->devs[udev->slot_id]->bw_table->ss_bw_in +=
+				xhci_get_ss_bw_consumed(ep_bw);
+		else
+			xhci->devs[udev->slot_id]->bw_table->ss_bw_out +=
+				xhci_get_ss_bw_consumed(ep_bw);
+		return;
+	}
+
+	/* For LS/FS devices, we need to translate the interval expressed in
+	 * microframes to frames.
+	 */
+	if (udev->speed == USB_SPEED_HIGH)
+		normalized_interval = ep_bw->ep_interval;
+	else
+		normalized_interval = ep_bw->ep_interval - 3;
+
+	if (normalized_interval == 0)
+		bw_table->interval0_esit_payload += ep_bw->max_esit_payload;
+	interval_bw = &bw_table->interval_bw[normalized_interval];
+	interval_bw->num_packets += ep_bw->num_packets;
+	switch (udev->speed) {
+	case USB_SPEED_LOW:
+		interval_bw->overhead[LS_OVERHEAD_TYPE] += 1;
+		break;
+	case USB_SPEED_FULL:
+		interval_bw->overhead[FS_OVERHEAD_TYPE] += 1;
+		break;
+	case USB_SPEED_HIGH:
+		interval_bw->overhead[HS_OVERHEAD_TYPE] += 1;
+		break;
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_WIRELESS:
+		/* Should never happen because only LS/FS/HS endpoints will get
+		 * added to the endpoint list.
+		 */
+		return;
+	}
+
+	if (tt_info)
+		tt_info->active_eps += 1;
+	/* Insert the endpoint into the list, largest max packet size first. */
+	list_for_each_entry(smaller_ep, &interval_bw->endpoints,
+			bw_endpoint_list) {
+		if (ep_bw->max_packet_size >=
+				smaller_ep->bw_info.max_packet_size) {
+			/* Add the new ep before the smaller endpoint */
+			list_add_tail(&virt_ep->bw_endpoint_list,
+					&smaller_ep->bw_endpoint_list);
+			return;
+		}
+	}
+	/* Add the new endpoint at the end of the list. */
+	list_add_tail(&virt_ep->bw_endpoint_list,
+			&interval_bw->endpoints);
+}
+
+void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int old_active_eps)
+{
+	struct xhci_root_port_bw_info *rh_bw_info;
+	if (!virt_dev->tt_info)
+		return;
+
+	rh_bw_info = &xhci->rh_bw[virt_dev->real_port - 1];
+	if (old_active_eps == 0 &&
+				virt_dev->tt_info->active_eps != 0) {
+		rh_bw_info->num_active_tts += 1;
+		rh_bw_info->bw_table.bw_used += TT_HS_OVERHEAD;
+	} else if (old_active_eps != 0 &&
+				virt_dev->tt_info->active_eps == 0) {
+		rh_bw_info->num_active_tts -= 1;
+		rh_bw_info->bw_table.bw_used -= TT_HS_OVERHEAD;
+	}
+}
+
+static int xhci_reserve_bandwidth(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		struct xhci_container_ctx *in_ctx)
+{
+	struct xhci_bw_info ep_bw_info[31];
+	int i;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	int old_active_eps = 0;
+
+	if (virt_dev->tt_info)
+		old_active_eps = virt_dev->tt_info->active_eps;
+
+	ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < 31; i++) {
+		if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i))
+			continue;
+
+		/* Make a copy of the BW info in case we need to revert this */
+		memcpy(&ep_bw_info[i], &virt_dev->eps[i].bw_info,
+				sizeof(ep_bw_info[i]));
+		/* Drop the endpoint from the interval table if the endpoint is
+		 * being dropped or changed.
+		 */
+		if (EP_IS_DROPPED(ctrl_ctx, i))
+			xhci_drop_ep_from_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					virt_dev->udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+	}
+	/* Overwrite the information stored in the endpoints' bw_info */
+	xhci_update_bw_info(xhci, virt_dev->in_ctx, ctrl_ctx, virt_dev);
+	for (i = 0; i < 31; i++) {
+		/* Add any changed or added endpoints to the interval table */
+		if (EP_IS_ADDED(ctrl_ctx, i))
+			xhci_add_ep_to_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					virt_dev->udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+	}
+
+	if (!xhci_check_bw_table(xhci, virt_dev, old_active_eps)) {
+		/* Ok, this fits in the bandwidth we have.
+		 * Update the number of active TTs.
+		 */
+		xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps);
+		return 0;
+	}
+
+	/* We don't have enough bandwidth for this, revert the stored info. */
+	for (i = 0; i < 31; i++) {
+		if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i))
+			continue;
+
+		/* Drop the new copies of any added or changed endpoints from
+		 * the interval table.
+		 */
+		if (EP_IS_ADDED(ctrl_ctx, i)) {
+			xhci_drop_ep_from_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					virt_dev->udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+		}
+		/* Revert the endpoint back to its old information */
+		memcpy(&virt_dev->eps[i].bw_info, &ep_bw_info[i],
+				sizeof(ep_bw_info[i]));
+		/* Add any changed or dropped endpoints back into the table */
+		if (EP_IS_DROPPED(ctrl_ctx, i))
+			xhci_add_ep_to_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					virt_dev->udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+	}
+	return -ENOMEM;
+}
+
+
+/* Issue a configure endpoint command or evaluate context command
+ * and wait for it to finish.
+ */
+static int xhci_configure_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct xhci_command *command,
+		bool ctx_change, bool must_succeed)
+{
+	int ret;
+	unsigned long flags;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_virt_device *virt_dev;
+	struct xhci_slot_ctx *slot_ctx;
+
+	if (!command)
+		return -EINVAL;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	if (xhci->xhc_state & XHCI_STATE_DYING) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	virt_dev = xhci->devs[udev->slot_id];
+
+	ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+	if (!ctrl_ctx) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		return -ENOMEM;
+	}
+
+	if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
+			xhci_reserve_host_resources(xhci, ctrl_ctx)) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_warn(xhci, "Not enough host resources, "
+				"active endpoint contexts = %u\n",
+				xhci->num_active_eps);
+		return -ENOMEM;
+	}
+	if ((xhci->quirks & XHCI_SW_BW_CHECKING) &&
+	    xhci_reserve_bandwidth(xhci, virt_dev, command->in_ctx)) {
+		if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
+			xhci_free_host_resources(xhci, ctrl_ctx);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_warn(xhci, "Not enough bandwidth\n");
+		return -ENOMEM;
+	}
+
+	slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx);
+
+	trace_xhci_configure_endpoint_ctrl_ctx(ctrl_ctx);
+	trace_xhci_configure_endpoint(slot_ctx);
+
+	if (!ctx_change)
+		ret = xhci_queue_configure_endpoint(xhci, command,
+				command->in_ctx->dma,
+				udev->slot_id, must_succeed);
+	else
+		ret = xhci_queue_evaluate_context(xhci, command,
+				command->in_ctx->dma,
+				udev->slot_id, must_succeed);
+	if (ret < 0) {
+		if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
+			xhci_free_host_resources(xhci, ctrl_ctx);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_dbg_trace(xhci,  trace_xhci_dbg_context_change,
+				"FIXME allocate a new ring segment");
+		return -ENOMEM;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Wait for the configure endpoint command to complete */
+	wait_for_completion(command->completion);
+
+	if (!ctx_change)
+		ret = xhci_configure_endpoint_result(xhci, udev,
+						     &command->status);
+	else
+		ret = xhci_evaluate_context_result(xhci, udev,
+						   &command->status);
+
+	if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+		spin_lock_irqsave(&xhci->lock, flags);
+		/* If the command failed, remove the reserved resources.
+		 * Otherwise, clean up the estimate to include dropped eps.
+		 */
+		if (ret)
+			xhci_free_host_resources(xhci, ctrl_ctx);
+		else
+			xhci_finish_resource_reservation(xhci, ctrl_ctx);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	}
+	return ret;
+}
+
+static void xhci_check_bw_drop_ep_streams(struct xhci_hcd *xhci,
+	struct xhci_virt_device *vdev, int i)
+{
+	struct xhci_virt_ep *ep = &vdev->eps[i];
+
+	if (ep->ep_state & EP_HAS_STREAMS) {
+		xhci_warn(xhci, "WARN: endpoint 0x%02x has streams on set_interface, freeing streams.\n",
+				xhci_get_endpoint_address(i));
+		xhci_free_stream_info(xhci, ep->stream_info);
+		ep->stream_info = NULL;
+		ep->ep_state &= ~EP_HAS_STREAMS;
+	}
+}
+
+/* Called after one or more calls to xhci_add_endpoint() or
+ * xhci_drop_endpoint().  If this call fails, the USB core is expected
+ * to call xhci_reset_bandwidth().
+ *
+ * Since we are in the middle of changing either configuration or
+ * installing a new alt setting, the USB core won't allow URBs to be
+ * enqueued for any endpoint on the old config or interface.  Nothing
+ * else should be touching the xhci->devs[slot_id] structure, so we
+ * don't need to take the xhci->lock for manipulating that.
+ */
+int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	int i;
+	int ret = 0;
+	struct xhci_hcd *xhci;
+	struct xhci_virt_device	*virt_dev;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_slot_ctx *slot_ctx;
+	struct xhci_command *command;
+
+	ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
+	if (ret <= 0)
+		return ret;
+	xhci = hcd_to_xhci(hcd);
+	if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+		(xhci->xhc_state & XHCI_STATE_REMOVING))
+		return -ENODEV;
+
+	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+	virt_dev = xhci->devs[udev->slot_id];
+
+	command = xhci_alloc_command(xhci, true, GFP_KERNEL);
+	if (!command)
+		return -ENOMEM;
+
+	command->in_ctx = virt_dev->in_ctx;
+
+	/* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
+	ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		ret = -ENOMEM;
+		goto command_cleanup;
+	}
+	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+	ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG);
+	ctrl_ctx->drop_flags &= cpu_to_le32(~(SLOT_FLAG | EP0_FLAG));
+
+	/* Don't issue the command if there's no endpoints to update. */
+	if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) &&
+	    ctrl_ctx->drop_flags == 0) {
+		ret = 0;
+		goto command_cleanup;
+	}
+	/* Fix up Context Entries field. Minimum value is EP0 == BIT(1). */
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+	for (i = 31; i >= 1; i--) {
+		__le32 le32 = cpu_to_le32(BIT(i));
+
+		if ((virt_dev->eps[i-1].ring && !(ctrl_ctx->drop_flags & le32))
+		    || (ctrl_ctx->add_flags & le32) || i == 1) {
+			slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
+			slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(i));
+			break;
+		}
+	}
+
+	ret = xhci_configure_endpoint(xhci, udev, command,
+			false, false);
+	if (ret)
+		/* Callee should call reset_bandwidth() */
+		goto command_cleanup;
+
+	/* Free any rings that were dropped, but not changed. */
+	for (i = 1; i < 31; i++) {
+		if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) &&
+		    !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))) {
+			xhci_free_endpoint_ring(xhci, virt_dev, i);
+			xhci_check_bw_drop_ep_streams(xhci, virt_dev, i);
+		}
+	}
+	xhci_zero_in_ctx(xhci, virt_dev);
+	/*
+	 * Install any rings for completely new endpoints or changed endpoints,
+	 * and free any old rings from changed endpoints.
+	 */
+	for (i = 1; i < 31; i++) {
+		if (!virt_dev->eps[i].new_ring)
+			continue;
+		/* Only free the old ring if it exists.
+		 * It may not if this is the first add of an endpoint.
+		 */
+		if (virt_dev->eps[i].ring) {
+			xhci_free_endpoint_ring(xhci, virt_dev, i);
+		}
+		xhci_check_bw_drop_ep_streams(xhci, virt_dev, i);
+		virt_dev->eps[i].ring = virt_dev->eps[i].new_ring;
+		virt_dev->eps[i].new_ring = NULL;
+		xhci_debugfs_create_endpoint(xhci, virt_dev, i);
+	}
+command_cleanup:
+	kfree(command->completion);
+	kfree(command);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(xhci_check_bandwidth);
+
+void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct xhci_hcd *xhci;
+	struct xhci_virt_device	*virt_dev;
+	int i, ret;
+
+	ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
+	if (ret <= 0)
+		return;
+	xhci = hcd_to_xhci(hcd);
+
+	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+	virt_dev = xhci->devs[udev->slot_id];
+	/* Free any rings allocated for added endpoints */
+	for (i = 0; i < 31; i++) {
+		if (virt_dev->eps[i].new_ring) {
+			xhci_debugfs_remove_endpoint(xhci, virt_dev, i);
+			xhci_ring_free(xhci, virt_dev->eps[i].new_ring);
+			virt_dev->eps[i].new_ring = NULL;
+		}
+	}
+	xhci_zero_in_ctx(xhci, virt_dev);
+}
+EXPORT_SYMBOL_GPL(xhci_reset_bandwidth);
+
+static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_container_ctx *out_ctx,
+		struct xhci_input_control_ctx *ctrl_ctx,
+		u32 add_flags, u32 drop_flags)
+{
+	ctrl_ctx->add_flags = cpu_to_le32(add_flags);
+	ctrl_ctx->drop_flags = cpu_to_le32(drop_flags);
+	xhci_slot_copy(xhci, in_ctx, out_ctx);
+	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+}
+
+static void xhci_endpoint_disable(struct usb_hcd *hcd,
+				  struct usb_host_endpoint *host_ep)
+{
+	struct xhci_hcd		*xhci;
+	struct xhci_virt_device	*vdev;
+	struct xhci_virt_ep	*ep;
+	struct usb_device	*udev;
+	unsigned long		flags;
+	unsigned int		ep_index;
+
+	xhci = hcd_to_xhci(hcd);
+rescan:
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	udev = (struct usb_device *)host_ep->hcpriv;
+	if (!udev || !udev->slot_id)
+		goto done;
+
+	vdev = xhci->devs[udev->slot_id];
+	if (!vdev)
+		goto done;
+
+	ep_index = xhci_get_endpoint_index(&host_ep->desc);
+	ep = &vdev->eps[ep_index];
+
+	/* wait for hub_tt_work to finish clearing hub TT */
+	if (ep->ep_state & EP_CLEARING_TT) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		schedule_timeout_uninterruptible(1);
+		goto rescan;
+	}
+
+	if (ep->ep_state)
+		xhci_dbg(xhci, "endpoint disable with ep_state 0x%x\n",
+			 ep->ep_state);
+done:
+	host_ep->hcpriv = NULL;
+	spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
+/*
+ * Called after usb core issues a clear halt control message.
+ * The host side of the halt should already be cleared by a reset endpoint
+ * command issued when the STALL event was received.
+ *
+ * The reset endpoint command may only be issued to endpoints in the halted
+ * state. For software that wishes to reset the data toggle or sequence number
+ * of an endpoint that isn't in the halted state this function will issue a
+ * configure endpoint command with the Drop and Add bits set for the target
+ * endpoint. Refer to the additional note in xhci spcification section 4.6.8.
+ */
+
+static void xhci_endpoint_reset(struct usb_hcd *hcd,
+		struct usb_host_endpoint *host_ep)
+{
+	struct xhci_hcd *xhci;
+	struct usb_device *udev;
+	struct xhci_virt_device *vdev;
+	struct xhci_virt_ep *ep;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_command *stop_cmd, *cfg_cmd;
+	unsigned int ep_index;
+	unsigned long flags;
+	u32 ep_flag;
+	int err;
+
+	xhci = hcd_to_xhci(hcd);
+	if (!host_ep->hcpriv)
+		return;
+	udev = (struct usb_device *) host_ep->hcpriv;
+	vdev = xhci->devs[udev->slot_id];
+
+	/*
+	 * vdev may be lost due to xHC restore error and re-initialization
+	 * during S3/S4 resume. A new vdev will be allocated later by
+	 * xhci_discover_or_reset_device()
+	 */
+	if (!udev->slot_id || !vdev)
+		return;
+	ep_index = xhci_get_endpoint_index(&host_ep->desc);
+	ep = &vdev->eps[ep_index];
+
+	/* Bail out if toggle is already being cleared by a endpoint reset */
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (ep->ep_state & EP_HARD_CLEAR_TOGGLE) {
+		ep->ep_state &= ~EP_HARD_CLEAR_TOGGLE;
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return;
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	/* Only interrupt and bulk ep's use data toggle, USB2 spec 5.5.4-> */
+	if (usb_endpoint_xfer_control(&host_ep->desc) ||
+	    usb_endpoint_xfer_isoc(&host_ep->desc))
+		return;
+
+	ep_flag = xhci_get_endpoint_flag(&host_ep->desc);
+
+	if (ep_flag == SLOT_FLAG || ep_flag == EP0_FLAG)
+		return;
+
+	stop_cmd = xhci_alloc_command(xhci, true, GFP_NOWAIT);
+	if (!stop_cmd)
+		return;
+
+	cfg_cmd = xhci_alloc_command_with_ctx(xhci, true, GFP_NOWAIT);
+	if (!cfg_cmd)
+		goto cleanup;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	/* block queuing new trbs and ringing ep doorbell */
+	ep->ep_state |= EP_SOFT_CLEAR_TOGGLE;
+
+	/*
+	 * Make sure endpoint ring is empty before resetting the toggle/seq.
+	 * Driver is required to synchronously cancel all transfer request.
+	 * Stop the endpoint to force xHC to update the output context
+	 */
+
+	if (!list_empty(&ep->ring->td_list)) {
+		dev_err(&udev->dev, "EP not empty, refuse reset\n");
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, cfg_cmd);
+		goto cleanup;
+	}
+
+	err = xhci_queue_stop_endpoint(xhci, stop_cmd, udev->slot_id,
+					ep_index, 0);
+	if (err < 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, cfg_cmd);
+		xhci_dbg(xhci, "%s: Failed to queue stop ep command, %d ",
+				__func__, err);
+		goto cleanup;
+	}
+
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	wait_for_completion(stop_cmd->completion);
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	/* config ep command clears toggle if add and drop ep flags are set */
+	ctrl_ctx = xhci_get_input_control_ctx(cfg_cmd->in_ctx);
+	if (!ctrl_ctx) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, cfg_cmd);
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		goto cleanup;
+	}
+
+	xhci_setup_input_ctx_for_config_ep(xhci, cfg_cmd->in_ctx, vdev->out_ctx,
+					   ctrl_ctx, ep_flag, ep_flag);
+	xhci_endpoint_copy(xhci, cfg_cmd->in_ctx, vdev->out_ctx, ep_index);
+
+	err = xhci_queue_configure_endpoint(xhci, cfg_cmd, cfg_cmd->in_ctx->dma,
+				      udev->slot_id, false);
+	if (err < 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, cfg_cmd);
+		xhci_dbg(xhci, "%s: Failed to queue config ep command, %d ",
+				__func__, err);
+		goto cleanup;
+	}
+
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	wait_for_completion(cfg_cmd->completion);
+
+	xhci_free_command(xhci, cfg_cmd);
+cleanup:
+	xhci_free_command(xhci, stop_cmd);
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (ep->ep_state & EP_SOFT_CLEAR_TOGGLE)
+		ep->ep_state &= ~EP_SOFT_CLEAR_TOGGLE;
+	spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
+static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev, struct usb_host_endpoint *ep,
+		unsigned int slot_id)
+{
+	int ret;
+	unsigned int ep_index;
+	unsigned int ep_state;
+
+	if (!ep)
+		return -EINVAL;
+	ret = xhci_check_args(xhci_to_hcd(xhci), udev, ep, 1, true, __func__);
+	if (ret <= 0)
+		return ret ? ret : -EINVAL;
+	if (usb_ss_max_streams(&ep->ss_ep_comp) == 0) {
+		xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion"
+				" descriptor for ep 0x%x does not support streams\n",
+				ep->desc.bEndpointAddress);
+		return -EINVAL;
+	}
+
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
+	if (ep_state & EP_HAS_STREAMS ||
+			ep_state & EP_GETTING_STREAMS) {
+		xhci_warn(xhci, "WARN: SuperSpeed bulk endpoint 0x%x "
+				"already has streams set up.\n",
+				ep->desc.bEndpointAddress);
+		xhci_warn(xhci, "Send email to xHCI maintainer and ask for "
+				"dynamic stream context array reallocation.\n");
+		return -EINVAL;
+	}
+	if (!list_empty(&xhci->devs[slot_id]->eps[ep_index].ring->td_list)) {
+		xhci_warn(xhci, "Cannot setup streams for SuperSpeed bulk "
+				"endpoint 0x%x; URBs are pending.\n",
+				ep->desc.bEndpointAddress);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void xhci_calculate_streams_entries(struct xhci_hcd *xhci,
+		unsigned int *num_streams, unsigned int *num_stream_ctxs)
+{
+	unsigned int max_streams;
+
+	/* The stream context array size must be a power of two */
+	*num_stream_ctxs = roundup_pow_of_two(*num_streams);
+	/*
+	 * Find out how many primary stream array entries the host controller
+	 * supports.  Later we may use secondary stream arrays (similar to 2nd
+	 * level page entries), but that's an optional feature for xHCI host
+	 * controllers. xHCs must support at least 4 stream IDs.
+	 */
+	max_streams = HCC_MAX_PSA(xhci->hcc_params);
+	if (*num_stream_ctxs > max_streams) {
+		xhci_dbg(xhci, "xHCI HW only supports %u stream ctx entries.\n",
+				max_streams);
+		*num_stream_ctxs = max_streams;
+		*num_streams = max_streams;
+	}
+}
+
+/* Returns an error code if one of the endpoint already has streams.
+ * This does not change any data structures, it only checks and gathers
+ * information.
+ */
+static int xhci_calculate_streams_and_bitmask(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		unsigned int *num_streams, u32 *changed_ep_bitmask)
+{
+	unsigned int max_streams;
+	unsigned int endpoint_flag;
+	int i;
+	int ret;
+
+	for (i = 0; i < num_eps; i++) {
+		ret = xhci_check_streams_endpoint(xhci, udev,
+				eps[i], udev->slot_id);
+		if (ret < 0)
+			return ret;
+
+		max_streams = usb_ss_max_streams(&eps[i]->ss_ep_comp);
+		if (max_streams < (*num_streams - 1)) {
+			xhci_dbg(xhci, "Ep 0x%x only supports %u stream IDs.\n",
+					eps[i]->desc.bEndpointAddress,
+					max_streams);
+			*num_streams = max_streams+1;
+		}
+
+		endpoint_flag = xhci_get_endpoint_flag(&eps[i]->desc);
+		if (*changed_ep_bitmask & endpoint_flag)
+			return -EINVAL;
+		*changed_ep_bitmask |= endpoint_flag;
+	}
+	return 0;
+}
+
+static u32 xhci_calculate_no_streams_bitmask(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps)
+{
+	u32 changed_ep_bitmask = 0;
+	unsigned int slot_id;
+	unsigned int ep_index;
+	unsigned int ep_state;
+	int i;
+
+	slot_id = udev->slot_id;
+	if (!xhci->devs[slot_id])
+		return 0;
+
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
+		/* Are streams already being freed for the endpoint? */
+		if (ep_state & EP_GETTING_NO_STREAMS) {
+			xhci_warn(xhci, "WARN Can't disable streams for "
+					"endpoint 0x%x, "
+					"streams are being disabled already\n",
+					eps[i]->desc.bEndpointAddress);
+			return 0;
+		}
+		/* Are there actually any streams to free? */
+		if (!(ep_state & EP_HAS_STREAMS) &&
+				!(ep_state & EP_GETTING_STREAMS)) {
+			xhci_warn(xhci, "WARN Can't disable streams for "
+					"endpoint 0x%x, "
+					"streams are already disabled!\n",
+					eps[i]->desc.bEndpointAddress);
+			xhci_warn(xhci, "WARN xhci_free_streams() called "
+					"with non-streams endpoint\n");
+			return 0;
+		}
+		changed_ep_bitmask |= xhci_get_endpoint_flag(&eps[i]->desc);
+	}
+	return changed_ep_bitmask;
+}
+
+/*
+ * The USB device drivers use this function (through the HCD interface in USB
+ * core) to prepare a set of bulk endpoints to use streams.  Streams are used to
+ * coordinate mass storage command queueing across multiple endpoints (basically
+ * a stream ID == a task ID).
+ *
+ * Setting up streams involves allocating the same size stream context array
+ * for each endpoint and issuing a configure endpoint command for all endpoints.
+ *
+ * Don't allow the call to succeed if one endpoint only supports one stream
+ * (which means it doesn't support streams at all).
+ *
+ * Drivers may get less stream IDs than they asked for, if the host controller
+ * hardware or endpoints claim they can't support the number of requested
+ * stream IDs.
+ */
+static int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		unsigned int num_streams, gfp_t mem_flags)
+{
+	int i, ret;
+	struct xhci_hcd *xhci;
+	struct xhci_virt_device *vdev;
+	struct xhci_command *config_cmd;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	unsigned int ep_index;
+	unsigned int num_stream_ctxs;
+	unsigned int max_packet;
+	unsigned long flags;
+	u32 changed_ep_bitmask = 0;
+
+	if (!eps)
+		return -EINVAL;
+
+	/* Add one to the number of streams requested to account for
+	 * stream 0 that is reserved for xHCI usage.
+	 */
+	num_streams += 1;
+	xhci = hcd_to_xhci(hcd);
+	xhci_dbg(xhci, "Driver wants %u stream IDs (including stream 0).\n",
+			num_streams);
+
+	/* MaxPSASize value 0 (2 streams) means streams are not supported */
+	if ((xhci->quirks & XHCI_BROKEN_STREAMS) ||
+			HCC_MAX_PSA(xhci->hcc_params) < 4) {
+		xhci_dbg(xhci, "xHCI controller does not support streams.\n");
+		return -ENOSYS;
+	}
+
+	config_cmd = xhci_alloc_command_with_ctx(xhci, true, mem_flags);
+	if (!config_cmd)
+		return -ENOMEM;
+
+	ctrl_ctx = xhci_get_input_control_ctx(config_cmd->in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		xhci_free_command(xhci, config_cmd);
+		return -ENOMEM;
+	}
+
+	/* Check to make sure all endpoints are not already configured for
+	 * streams.  While we're at it, find the maximum number of streams that
+	 * all the endpoints will support and check for duplicate endpoints.
+	 */
+	spin_lock_irqsave(&xhci->lock, flags);
+	ret = xhci_calculate_streams_and_bitmask(xhci, udev, eps,
+			num_eps, &num_streams, &changed_ep_bitmask);
+	if (ret < 0) {
+		xhci_free_command(xhci, config_cmd);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return ret;
+	}
+	if (num_streams <= 1) {
+		xhci_warn(xhci, "WARN: endpoints can't handle "
+				"more than one stream.\n");
+		xhci_free_command(xhci, config_cmd);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return -EINVAL;
+	}
+	vdev = xhci->devs[udev->slot_id];
+	/* Mark each endpoint as being in transition, so
+	 * xhci_urb_enqueue() will reject all URBs.
+	 */
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		vdev->eps[ep_index].ep_state |= EP_GETTING_STREAMS;
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Setup internal data structures and allocate HW data structures for
+	 * streams (but don't install the HW structures in the input context
+	 * until we're sure all memory allocation succeeded).
+	 */
+	xhci_calculate_streams_entries(xhci, &num_streams, &num_stream_ctxs);
+	xhci_dbg(xhci, "Need %u stream ctx entries for %u stream IDs.\n",
+			num_stream_ctxs, num_streams);
+
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		max_packet = usb_endpoint_maxp(&eps[i]->desc);
+		vdev->eps[ep_index].stream_info = xhci_alloc_stream_info(xhci,
+				num_stream_ctxs,
+				num_streams,
+				max_packet, mem_flags);
+		if (!vdev->eps[ep_index].stream_info)
+			goto cleanup;
+		/* Set maxPstreams in endpoint context and update deq ptr to
+		 * point to stream context array. FIXME
+		 */
+	}
+
+	/* Set up the input context for a configure endpoint command. */
+	for (i = 0; i < num_eps; i++) {
+		struct xhci_ep_ctx *ep_ctx;
+
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		ep_ctx = xhci_get_ep_ctx(xhci, config_cmd->in_ctx, ep_index);
+
+		xhci_endpoint_copy(xhci, config_cmd->in_ctx,
+				vdev->out_ctx, ep_index);
+		xhci_setup_streams_ep_input_ctx(xhci, ep_ctx,
+				vdev->eps[ep_index].stream_info);
+	}
+	/* Tell the HW to drop its old copy of the endpoint context info
+	 * and add the updated copy from the input context.
+	 */
+	xhci_setup_input_ctx_for_config_ep(xhci, config_cmd->in_ctx,
+			vdev->out_ctx, ctrl_ctx,
+			changed_ep_bitmask, changed_ep_bitmask);
+
+	/* Issue and wait for the configure endpoint command */
+	ret = xhci_configure_endpoint(xhci, udev, config_cmd,
+			false, false);
+
+	/* xHC rejected the configure endpoint command for some reason, so we
+	 * leave the old ring intact and free our internal streams data
+	 * structure.
+	 */
+	if (ret < 0)
+		goto cleanup;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		vdev->eps[ep_index].ep_state &= ~EP_GETTING_STREAMS;
+		xhci_dbg(xhci, "Slot %u ep ctx %u now has streams.\n",
+			 udev->slot_id, ep_index);
+		vdev->eps[ep_index].ep_state |= EP_HAS_STREAMS;
+	}
+	xhci_free_command(xhci, config_cmd);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		xhci_debugfs_create_stream_files(xhci, vdev, ep_index);
+	}
+	/* Subtract 1 for stream 0, which drivers can't use */
+	return num_streams - 1;
+
+cleanup:
+	/* If it didn't work, free the streams! */
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		xhci_free_stream_info(xhci, vdev->eps[ep_index].stream_info);
+		vdev->eps[ep_index].stream_info = NULL;
+		/* FIXME Unset maxPstreams in endpoint context and
+		 * update deq ptr to point to normal string ring.
+		 */
+		vdev->eps[ep_index].ep_state &= ~EP_GETTING_STREAMS;
+		vdev->eps[ep_index].ep_state &= ~EP_HAS_STREAMS;
+		xhci_endpoint_zero(xhci, vdev, eps[i]);
+	}
+	xhci_free_command(xhci, config_cmd);
+	return -ENOMEM;
+}
+
+/* Transition the endpoint from using streams to being a "normal" endpoint
+ * without streams.
+ *
+ * Modify the endpoint context state, submit a configure endpoint command,
+ * and free all endpoint rings for streams if that completes successfully.
+ */
+static int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		gfp_t mem_flags)
+{
+	int i, ret;
+	struct xhci_hcd *xhci;
+	struct xhci_virt_device *vdev;
+	struct xhci_command *command;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	unsigned int ep_index;
+	unsigned long flags;
+	u32 changed_ep_bitmask;
+
+	xhci = hcd_to_xhci(hcd);
+	vdev = xhci->devs[udev->slot_id];
+
+	/* Set up a configure endpoint command to remove the streams rings */
+	spin_lock_irqsave(&xhci->lock, flags);
+	changed_ep_bitmask = xhci_calculate_no_streams_bitmask(xhci,
+			udev, eps, num_eps);
+	if (changed_ep_bitmask == 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return -EINVAL;
+	}
+
+	/* Use the xhci_command structure from the first endpoint.  We may have
+	 * allocated too many, but the driver may call xhci_free_streams() for
+	 * each endpoint it grouped into one call to xhci_alloc_streams().
+	 */
+	ep_index = xhci_get_endpoint_index(&eps[0]->desc);
+	command = vdev->eps[ep_index].stream_info->free_streams_command;
+	ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+	if (!ctrl_ctx) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < num_eps; i++) {
+		struct xhci_ep_ctx *ep_ctx;
+
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index);
+		xhci->devs[udev->slot_id]->eps[ep_index].ep_state |=
+			EP_GETTING_NO_STREAMS;
+
+		xhci_endpoint_copy(xhci, command->in_ctx,
+				vdev->out_ctx, ep_index);
+		xhci_setup_no_streams_ep_input_ctx(ep_ctx,
+				&vdev->eps[ep_index]);
+	}
+	xhci_setup_input_ctx_for_config_ep(xhci, command->in_ctx,
+			vdev->out_ctx, ctrl_ctx,
+			changed_ep_bitmask, changed_ep_bitmask);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Issue and wait for the configure endpoint command,
+	 * which must succeed.
+	 */
+	ret = xhci_configure_endpoint(xhci, udev, command,
+			false, true);
+
+	/* xHC rejected the configure endpoint command for some reason, so we
+	 * leave the streams rings intact.
+	 */
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		xhci_free_stream_info(xhci, vdev->eps[ep_index].stream_info);
+		vdev->eps[ep_index].stream_info = NULL;
+		/* FIXME Unset maxPstreams in endpoint context and
+		 * update deq ptr to point to normal string ring.
+		 */
+		vdev->eps[ep_index].ep_state &= ~EP_GETTING_NO_STREAMS;
+		vdev->eps[ep_index].ep_state &= ~EP_HAS_STREAMS;
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	return 0;
+}
+
+/*
+ * Deletes endpoint resources for endpoints that were active before a Reset
+ * Device command, or a Disable Slot command.  The Reset Device command leaves
+ * the control endpoint intact, whereas the Disable Slot command deletes it.
+ *
+ * Must be called with xhci->lock held.
+ */
+void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
+	struct xhci_virt_device *virt_dev, bool drop_control_ep)
+{
+	int i;
+	unsigned int num_dropped_eps = 0;
+	unsigned int drop_flags = 0;
+
+	for (i = (drop_control_ep ? 0 : 1); i < 31; i++) {
+		if (virt_dev->eps[i].ring) {
+			drop_flags |= 1 << i;
+			num_dropped_eps++;
+		}
+	}
+	xhci->num_active_eps -= num_dropped_eps;
+	if (num_dropped_eps)
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Dropped %u ep ctxs, flags = 0x%x, "
+				"%u now active.",
+				num_dropped_eps, drop_flags,
+				xhci->num_active_eps);
+}
+
+/*
+ * This submits a Reset Device Command, which will set the device state to 0,
+ * set the device address to 0, and disable all the endpoints except the default
+ * control endpoint.  The USB core should come back and call
+ * xhci_address_device(), and then re-set up the configuration.  If this is
+ * called because of a usb_reset_and_verify_device(), then the old alternate
+ * settings will be re-installed through the normal bandwidth allocation
+ * functions.
+ *
+ * Wait for the Reset Device command to finish.  Remove all structures
+ * associated with the endpoints that were disabled.  Clear the input device
+ * structure? Reset the control endpoint 0 max packet size?
+ *
+ * If the virt_dev to be reset does not exist or does not match the udev,
+ * it means the device is lost, possibly due to the xHC restore error and
+ * re-initialization during S3/S4. In this case, call xhci_alloc_dev() to
+ * re-allocate the device.
+ */
+static int xhci_discover_or_reset_device(struct usb_hcd *hcd,
+		struct usb_device *udev)
+{
+	int ret, i;
+	unsigned long flags;
+	struct xhci_hcd *xhci;
+	unsigned int slot_id;
+	struct xhci_virt_device *virt_dev;
+	struct xhci_command *reset_device_cmd;
+	struct xhci_slot_ctx *slot_ctx;
+	int old_active_eps = 0;
+
+	ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__);
+	if (ret <= 0)
+		return ret;
+	xhci = hcd_to_xhci(hcd);
+	slot_id = udev->slot_id;
+	virt_dev = xhci->devs[slot_id];
+	if (!virt_dev) {
+		xhci_dbg(xhci, "The device to be reset with slot ID %u does "
+				"not exist. Re-allocate the device\n", slot_id);
+		ret = xhci_alloc_dev(hcd, udev);
+		if (ret == 1)
+			return 0;
+		else
+			return -EINVAL;
+	}
+
+	if (virt_dev->tt_info)
+		old_active_eps = virt_dev->tt_info->active_eps;
+
+	if (virt_dev->udev != udev) {
+		/* If the virt_dev and the udev does not match, this virt_dev
+		 * may belong to another udev.
+		 * Re-allocate the device.
+		 */
+		xhci_dbg(xhci, "The device to be reset with slot ID %u does "
+				"not match the udev. Re-allocate the device\n",
+				slot_id);
+		ret = xhci_alloc_dev(hcd, udev);
+		if (ret == 1)
+			return 0;
+		else
+			return -EINVAL;
+	}
+
+	/* If device is not setup, there is no point in resetting it */
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+	if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) ==
+						SLOT_STATE_DISABLED)
+		return 0;
+
+	trace_xhci_discover_or_reset_device(slot_ctx);
+
+	xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);
+	/* Allocate the command structure that holds the struct completion.
+	 * Assume we're in process context, since the normal device reset
+	 * process has to wait for the device anyway.  Storage devices are
+	 * reset as part of error handling, so use GFP_NOIO instead of
+	 * GFP_KERNEL.
+	 */
+	reset_device_cmd = xhci_alloc_command(xhci, true, GFP_NOIO);
+	if (!reset_device_cmd) {
+		xhci_dbg(xhci, "Couldn't allocate command structure.\n");
+		return -ENOMEM;
+	}
+
+	/* Attempt to submit the Reset Device command to the command ring */
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	ret = xhci_queue_reset_device(xhci, reset_device_cmd, slot_id);
+	if (ret) {
+		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		goto command_cleanup;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Wait for the Reset Device command to finish */
+	wait_for_completion(reset_device_cmd->completion);
+
+	/* The Reset Device command can't fail, according to the 0.95/0.96 spec,
+	 * unless we tried to reset a slot ID that wasn't enabled,
+	 * or the device wasn't in the addressed or configured state.
+	 */
+	ret = reset_device_cmd->status;
+	switch (ret) {
+	case COMP_COMMAND_ABORTED:
+	case COMP_COMMAND_RING_STOPPED:
+		xhci_warn(xhci, "Timeout waiting for reset device command\n");
+		ret = -ETIME;
+		goto command_cleanup;
+	case COMP_SLOT_NOT_ENABLED_ERROR: /* 0.95 completion for bad slot ID */
+	case COMP_CONTEXT_STATE_ERROR: /* 0.96 completion code for same thing */
+		xhci_dbg(xhci, "Can't reset device (slot ID %u) in %s state\n",
+				slot_id,
+				xhci_get_slot_state(xhci, virt_dev->out_ctx));
+		xhci_dbg(xhci, "Not freeing device rings.\n");
+		/* Don't treat this as an error.  May change my mind later. */
+		ret = 0;
+		goto command_cleanup;
+	case COMP_SUCCESS:
+		xhci_dbg(xhci, "Successful reset device command.\n");
+		break;
+	default:
+		if (xhci_is_vendor_info_code(xhci, ret))
+			break;
+		xhci_warn(xhci, "Unknown completion code %u for "
+				"reset device command.\n", ret);
+		ret = -EINVAL;
+		goto command_cleanup;
+	}
+
+	/* Free up host controller endpoint resources */
+	if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+		spin_lock_irqsave(&xhci->lock, flags);
+		/* Don't delete the default control endpoint resources */
+		xhci_free_device_endpoint_resources(xhci, virt_dev, false);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	}
+
+	/* Everything but endpoint 0 is disabled, so free the rings. */
+	for (i = 1; i < 31; i++) {
+		struct xhci_virt_ep *ep = &virt_dev->eps[i];
+
+		if (ep->ep_state & EP_HAS_STREAMS) {
+			xhci_warn(xhci, "WARN: endpoint 0x%02x has streams on device reset, freeing streams.\n",
+					xhci_get_endpoint_address(i));
+			xhci_free_stream_info(xhci, ep->stream_info);
+			ep->stream_info = NULL;
+			ep->ep_state &= ~EP_HAS_STREAMS;
+		}
+
+		if (ep->ring) {
+			xhci_debugfs_remove_endpoint(xhci, virt_dev, i);
+			xhci_free_endpoint_ring(xhci, virt_dev, i);
+		}
+		if (!list_empty(&virt_dev->eps[i].bw_endpoint_list))
+			xhci_drop_ep_from_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+		xhci_clear_endpoint_bw_info(&virt_dev->eps[i].bw_info);
+	}
+	/* If necessary, update the number of active TTs on this root port */
+	xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps);
+	virt_dev->flags = 0;
+	ret = 0;
+
+command_cleanup:
+	xhci_free_command(xhci, reset_device_cmd);
+	return ret;
+}
+
+/*
+ * At this point, the struct usb_device is about to go away, the device has
+ * disconnected, and all traffic has been stopped and the endpoints have been
+ * disabled.  Free any HC data structures associated with that device.
+ */
+static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct xhci_virt_device *virt_dev;
+	struct xhci_slot_ctx *slot_ctx;
+	unsigned long flags;
+	int i, ret;
+
+	/*
+	 * We called pm_runtime_get_noresume when the device was attached.
+	 * Decrement the counter here to allow controller to runtime suspend
+	 * if no devices remain.
+	 */
+	if (xhci->quirks & XHCI_RESET_ON_RESUME)
+		pm_runtime_put_noidle(hcd->self.controller);
+
+	ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
+	/* If the host is halted due to driver unload, we still need to free the
+	 * device.
+	 */
+	if (ret <= 0 && ret != -ENODEV)
+		return;
+
+	virt_dev = xhci->devs[udev->slot_id];
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+	trace_xhci_free_dev(slot_ctx);
+
+	/* Stop any wayward timer functions (which may grab the lock) */
+	for (i = 0; i < 31; i++)
+		virt_dev->eps[i].ep_state &= ~EP_STOP_CMD_PENDING;
+	virt_dev->udev = NULL;
+	xhci_disable_slot(xhci, udev->slot_id);
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	xhci_free_virt_device(xhci, udev->slot_id);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+}
+
+int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id)
+{
+	struct xhci_command *command;
+	unsigned long flags;
+	u32 state;
+	int ret;
+
+	command = xhci_alloc_command(xhci, true, GFP_KERNEL);
+	if (!command)
+		return -ENOMEM;
+
+	xhci_debugfs_remove_slot(xhci, slot_id);
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	/* Don't disable the slot if the host controller is dead. */
+	state = readl(&xhci->op_regs->status);
+	if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING) ||
+			(xhci->xhc_state & XHCI_STATE_HALTED)) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		kfree(command);
+		return -ENODEV;
+	}
+
+	ret = xhci_queue_slot_control(xhci, command, TRB_DISABLE_SLOT,
+				slot_id);
+	if (ret) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		kfree(command);
+		return ret;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	wait_for_completion(command->completion);
+
+	if (command->status != COMP_SUCCESS)
+		xhci_warn(xhci, "Unsuccessful disable slot %u command, status %d\n",
+			  slot_id, command->status);
+
+	xhci_free_command(xhci, command);
+
+	return 0;
+}
+
+/*
+ * Checks if we have enough host controller resources for the default control
+ * endpoint.
+ *
+ * Must be called with xhci->lock held.
+ */
+static int xhci_reserve_host_control_ep_resources(struct xhci_hcd *xhci)
+{
+	if (xhci->num_active_eps + 1 > xhci->limit_active_eps) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Not enough ep ctxs: "
+				"%u active, need to add 1, limit is %u.",
+				xhci->num_active_eps, xhci->limit_active_eps);
+		return -ENOMEM;
+	}
+	xhci->num_active_eps += 1;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+			"Adding 1 ep ctx, %u now active.",
+			xhci->num_active_eps);
+	return 0;
+}
+
+
+/*
+ * Returns 0 if the xHC ran out of device slots, the Enable Slot command
+ * timed out, or allocating memory failed.  Returns 1 on success.
+ */
+int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct xhci_virt_device *vdev;
+	struct xhci_slot_ctx *slot_ctx;
+	unsigned long flags;
+	int ret, slot_id;
+	struct xhci_command *command;
+
+	command = xhci_alloc_command(xhci, true, GFP_KERNEL);
+	if (!command)
+		return 0;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	ret = xhci_queue_slot_control(xhci, command, TRB_ENABLE_SLOT, 0);
+	if (ret) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+		xhci_free_command(xhci, command);
+		return 0;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	wait_for_completion(command->completion);
+	slot_id = command->slot_id;
+
+	if (!slot_id || command->status != COMP_SUCCESS) {
+		xhci_err(xhci, "Error while assigning device slot ID: %s\n",
+			 xhci_trb_comp_code_string(command->status));
+		xhci_err(xhci, "Max number of devices this xHCI host supports is %u.\n",
+				HCS_MAX_SLOTS(
+					readl(&xhci->cap_regs->hcs_params1)));
+		xhci_free_command(xhci, command);
+		return 0;
+	}
+
+	xhci_free_command(xhci, command);
+
+	if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+		spin_lock_irqsave(&xhci->lock, flags);
+		ret = xhci_reserve_host_control_ep_resources(xhci);
+		if (ret) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_warn(xhci, "Not enough host resources, "
+					"active endpoint contexts = %u\n",
+					xhci->num_active_eps);
+			goto disable_slot;
+		}
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	}
+	/* Use GFP_NOIO, since this function can be called from
+	 * xhci_discover_or_reset_device(), which may be called as part of
+	 * mass storage driver error handling.
+	 */
+	if (!xhci_alloc_virt_device(xhci, slot_id, udev, GFP_NOIO)) {
+		xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
+		goto disable_slot;
+	}
+	vdev = xhci->devs[slot_id];
+	slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
+	trace_xhci_alloc_dev(slot_ctx);
+
+	udev->slot_id = slot_id;
+
+	xhci_debugfs_create_slot(xhci, slot_id);
+
+	/*
+	 * If resetting upon resume, we can't put the controller into runtime
+	 * suspend if there is a device attached.
+	 */
+	if (xhci->quirks & XHCI_RESET_ON_RESUME)
+		pm_runtime_get_noresume(hcd->self.controller);
+
+	/* Is this a LS or FS device under a HS hub? */
+	/* Hub or peripherial? */
+	return 1;
+
+disable_slot:
+	xhci_disable_slot(xhci, udev->slot_id);
+	xhci_free_virt_device(xhci, udev->slot_id);
+
+	return 0;
+}
+
+/*
+ * Issue an Address Device command and optionally send a corresponding
+ * SetAddress request to the device.
+ */
+static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
+			     enum xhci_setup_dev setup)
+{
+	const char *act = setup == SETUP_CONTEXT_ONLY ? "context" : "address";
+	unsigned long flags;
+	struct xhci_virt_device *virt_dev;
+	int ret = 0;
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct xhci_slot_ctx *slot_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	u64 temp_64;
+	struct xhci_command *command = NULL;
+
+	mutex_lock(&xhci->mutex);
+
+	if (xhci->xhc_state) {	/* dying, removing or halted */
+		ret = -ESHUTDOWN;
+		goto out;
+	}
+
+	if (!udev->slot_id) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+				"Bad Slot ID %d", udev->slot_id);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	virt_dev = xhci->devs[udev->slot_id];
+
+	if (WARN_ON(!virt_dev)) {
+		/*
+		 * In plug/unplug torture test with an NEC controller,
+		 * a zero-dereference was observed once due to virt_dev = 0.
+		 * Print useful debug rather than crash if it is observed again!
+		 */
+		xhci_warn(xhci, "Virt dev invalid for slot_id 0x%x!\n",
+			udev->slot_id);
+		ret = -EINVAL;
+		goto out;
+	}
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+	trace_xhci_setup_device_slot(slot_ctx);
+
+	if (setup == SETUP_CONTEXT_ONLY) {
+		if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) ==
+		    SLOT_STATE_DEFAULT) {
+			xhci_dbg(xhci, "Slot already in default state\n");
+			goto out;
+		}
+	}
+
+	command = xhci_alloc_command(xhci, true, GFP_KERNEL);
+	if (!command) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	command->in_ctx = virt_dev->in_ctx;
+
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+	ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		ret = -EINVAL;
+		goto out;
+	}
+	/*
+	 * If this is the first Set Address since device plug-in or
+	 * virt_device realloaction after a resume with an xHCI power loss,
+	 * then set up the slot context.
+	 */
+	if (!slot_ctx->dev_info)
+		xhci_setup_addressable_virt_dev(xhci, udev);
+	/* Otherwise, update the control endpoint ring enqueue pointer. */
+	else
+		xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
+	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
+	ctrl_ctx->drop_flags = 0;
+
+	trace_xhci_address_ctx(xhci, virt_dev->in_ctx,
+				le32_to_cpu(slot_ctx->dev_info) >> 27);
+
+	trace_xhci_address_ctrl_ctx(ctrl_ctx);
+	spin_lock_irqsave(&xhci->lock, flags);
+	trace_xhci_setup_device(virt_dev);
+	ret = xhci_queue_address_device(xhci, command, virt_dev->in_ctx->dma,
+					udev->slot_id, setup);
+	if (ret) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+				"FIXME: allocate a command ring segment");
+		goto out;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */
+	wait_for_completion(command->completion);
+
+	/* FIXME: From section 4.3.4: "Software shall be responsible for timing
+	 * the SetAddress() "recovery interval" required by USB and aborting the
+	 * command on a timeout.
+	 */
+	switch (command->status) {
+	case COMP_COMMAND_ABORTED:
+	case COMP_COMMAND_RING_STOPPED:
+		xhci_warn(xhci, "Timeout while waiting for setup device command\n");
+		ret = -ETIME;
+		break;
+	case COMP_CONTEXT_STATE_ERROR:
+	case COMP_SLOT_NOT_ENABLED_ERROR:
+		xhci_err(xhci, "Setup ERROR: setup %s command for slot %d.\n",
+			 act, udev->slot_id);
+		ret = -EINVAL;
+		break;
+	case COMP_USB_TRANSACTION_ERROR:
+		dev_warn(&udev->dev, "Device not responding to setup %s.\n", act);
+
+		mutex_unlock(&xhci->mutex);
+		ret = xhci_disable_slot(xhci, udev->slot_id);
+		xhci_free_virt_device(xhci, udev->slot_id);
+		if (!ret)
+			xhci_alloc_dev(hcd, udev);
+		kfree(command->completion);
+		kfree(command);
+		return -EPROTO;
+	case COMP_INCOMPATIBLE_DEVICE_ERROR:
+		dev_warn(&udev->dev,
+			 "ERROR: Incompatible device for setup %s command\n", act);
+		ret = -ENODEV;
+		break;
+	case COMP_SUCCESS:
+		xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+			       "Successful setup %s command", act);
+		break;
+	default:
+		xhci_err(xhci,
+			 "ERROR: unexpected setup %s command completion code 0x%x.\n",
+			 act, command->status);
+		trace_xhci_address_ctx(xhci, virt_dev->out_ctx, 1);
+		ret = -EINVAL;
+		break;
+	}
+	if (ret)
+		goto out;
+	temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+			"Op regs DCBAA ptr = %#016llx", temp_64);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+		"Slot ID %d dcbaa entry @%p = %#016llx",
+		udev->slot_id,
+		&xhci->dcbaa->dev_context_ptrs[udev->slot_id],
+		(unsigned long long)
+		le64_to_cpu(xhci->dcbaa->dev_context_ptrs[udev->slot_id]));
+	xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+			"Output Context DMA address = %#08llx",
+			(unsigned long long)virt_dev->out_ctx->dma);
+	trace_xhci_address_ctx(xhci, virt_dev->in_ctx,
+				le32_to_cpu(slot_ctx->dev_info) >> 27);
+	/*
+	 * USB core uses address 1 for the roothubs, so we add one to the
+	 * address given back to us by the HC.
+	 */
+	trace_xhci_address_ctx(xhci, virt_dev->out_ctx,
+				le32_to_cpu(slot_ctx->dev_info) >> 27);
+	/* Zero the input context control for later use */
+	ctrl_ctx->add_flags = 0;
+	ctrl_ctx->drop_flags = 0;
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+	udev->devaddr = (u8)(le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+		       "Internal device address = %d",
+		       le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK);
+out:
+	mutex_unlock(&xhci->mutex);
+	if (command) {
+		kfree(command->completion);
+		kfree(command);
+	}
+	return ret;
+}
+
+static int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	return xhci_setup_device(hcd, udev, SETUP_CONTEXT_ADDRESS);
+}
+
+static int xhci_enable_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	return xhci_setup_device(hcd, udev, SETUP_CONTEXT_ONLY);
+}
+
+/*
+ * Transfer the port index into real index in the HW port status
+ * registers. Caculate offset between the port's PORTSC register
+ * and port status base. Divide the number of per port register
+ * to get the real index. The raw port number bases 1.
+ */
+int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1)
+{
+	struct xhci_hub *rhub;
+
+	rhub = xhci_get_rhub(hcd);
+	return rhub->ports[port1 - 1]->hw_portnum + 1;
+}
+
+/*
+ * Issue an Evaluate Context command to change the Maximum Exit Latency in the
+ * slot context.  If that succeeds, store the new MEL in the xhci_virt_device.
+ */
+static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
+			struct usb_device *udev, u16 max_exit_latency)
+{
+	struct xhci_virt_device *virt_dev;
+	struct xhci_command *command;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_slot_ctx *slot_ctx;
+	unsigned long flags;
+	int ret;
+
+	command = xhci_alloc_command_with_ctx(xhci, true, GFP_KERNEL);
+	if (!command)
+		return -ENOMEM;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	virt_dev = xhci->devs[udev->slot_id];
+
+	/*
+	 * virt_dev might not exists yet if xHC resumed from hibernate (S4) and
+	 * xHC was re-initialized. Exit latency will be set later after
+	 * hub_port_finish_reset() is done and xhci->devs[] are re-allocated
+	 */
+
+	if (!virt_dev || max_exit_latency == virt_dev->current_mel) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, command);
+		return 0;
+	}
+
+	/* Attempt to issue an Evaluate Context command to change the MEL. */
+	ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+	if (!ctrl_ctx) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, command);
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		return -ENOMEM;
+	}
+
+	xhci_slot_copy(xhci, command->in_ctx, virt_dev->out_ctx);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+	slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx);
+	slot_ctx->dev_info2 &= cpu_to_le32(~((u32) MAX_EXIT));
+	slot_ctx->dev_info2 |= cpu_to_le32(max_exit_latency);
+	slot_ctx->dev_state = 0;
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+			"Set up evaluate context for LPM MEL change.");
+
+	/* Issue and wait for the evaluate context command. */
+	ret = xhci_configure_endpoint(xhci, udev, command,
+			true, true);
+
+	if (!ret) {
+		spin_lock_irqsave(&xhci->lock, flags);
+		virt_dev->current_mel = max_exit_latency;
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	}
+
+	xhci_free_command(xhci, command);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM
+
+/* BESL to HIRD Encoding array for USB2 LPM */
+static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000,
+	3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000};
+
+/* Calculate HIRD/BESL for USB2 PORTPMSC*/
+static int xhci_calculate_hird_besl(struct xhci_hcd *xhci,
+					struct usb_device *udev)
+{
+	int u2del, besl, besl_host;
+	int besl_device = 0;
+	u32 field;
+
+	u2del = HCS_U2_LATENCY(xhci->hcs_params3);
+	field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
+
+	if (field & USB_BESL_SUPPORT) {
+		for (besl_host = 0; besl_host < 16; besl_host++) {
+			if (xhci_besl_encoding[besl_host] >= u2del)
+				break;
+		}
+		/* Use baseline BESL value as default */
+		if (field & USB_BESL_BASELINE_VALID)
+			besl_device = USB_GET_BESL_BASELINE(field);
+		else if (field & USB_BESL_DEEP_VALID)
+			besl_device = USB_GET_BESL_DEEP(field);
+	} else {
+		if (u2del <= 50)
+			besl_host = 0;
+		else
+			besl_host = (u2del - 51) / 75 + 1;
+	}
+
+	besl = besl_host + besl_device;
+	if (besl > 15)
+		besl = 15;
+
+	return besl;
+}
+
+/* Calculate BESLD, L1 timeout and HIRDM for USB2 PORTHLPMC */
+static int xhci_calculate_usb2_hw_lpm_params(struct usb_device *udev)
+{
+	u32 field;
+	int l1;
+	int besld = 0;
+	int hirdm = 0;
+
+	field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
+
+	/* xHCI l1 is set in steps of 256us, xHCI 1.0 section 5.4.11.2 */
+	l1 = udev->l1_params.timeout / 256;
+
+	/* device has preferred BESLD */
+	if (field & USB_BESL_DEEP_VALID) {
+		besld = USB_GET_BESL_DEEP(field);
+		hirdm = 1;
+	}
+
+	return PORT_BESLD(besld) | PORT_L1_TIMEOUT(l1) | PORT_HIRDM(hirdm);
+}
+
+static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
+			struct usb_device *udev, int enable)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct xhci_port **ports;
+	__le32 __iomem	*pm_addr, *hlpm_addr;
+	u32		pm_val, hlpm_val, field;
+	unsigned int	port_num;
+	unsigned long	flags;
+	int		hird, exit_latency;
+	int		ret;
+
+	if (xhci->quirks & XHCI_HW_LPM_DISABLE)
+		return -EPERM;
+
+	if (hcd->speed >= HCD_USB3 || !xhci->hw_lpm_support ||
+			!udev->lpm_capable)
+		return -EPERM;
+
+	if (!udev->parent || udev->parent->parent ||
+			udev->descriptor.bDeviceClass == USB_CLASS_HUB)
+		return -EPERM;
+
+	if (udev->usb2_hw_lpm_capable != 1)
+		return -EPERM;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	ports = xhci->usb2_rhub.ports;
+	port_num = udev->portnum - 1;
+	pm_addr = ports[port_num]->addr + PORTPMSC;
+	pm_val = readl(pm_addr);
+	hlpm_addr = ports[port_num]->addr + PORTHLPMC;
+
+	xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
+			enable ? "enable" : "disable", port_num + 1);
+
+	if (enable) {
+		/* Host supports BESL timeout instead of HIRD */
+		if (udev->usb2_hw_lpm_besl_capable) {
+			/* if device doesn't have a preferred BESL value use a
+			 * default one which works with mixed HIRD and BESL
+			 * systems. See XHCI_DEFAULT_BESL definition in xhci.h
+			 */
+			field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
+			if ((field & USB_BESL_SUPPORT) &&
+			    (field & USB_BESL_BASELINE_VALID))
+				hird = USB_GET_BESL_BASELINE(field);
+			else
+				hird = udev->l1_params.besl;
+
+			exit_latency = xhci_besl_encoding[hird];
+			spin_unlock_irqrestore(&xhci->lock, flags);
+
+			ret = xhci_change_max_exit_latency(xhci, udev,
+							   exit_latency);
+			if (ret < 0)
+				return ret;
+			spin_lock_irqsave(&xhci->lock, flags);
+
+			hlpm_val = xhci_calculate_usb2_hw_lpm_params(udev);
+			writel(hlpm_val, hlpm_addr);
+			/* flush write */
+			readl(hlpm_addr);
+		} else {
+			hird = xhci_calculate_hird_besl(xhci, udev);
+		}
+
+		pm_val &= ~PORT_HIRD_MASK;
+		pm_val |= PORT_HIRD(hird) | PORT_RWE | PORT_L1DS(udev->slot_id);
+		writel(pm_val, pm_addr);
+		pm_val = readl(pm_addr);
+		pm_val |= PORT_HLE;
+		writel(pm_val, pm_addr);
+		/* flush write */
+		readl(pm_addr);
+	} else {
+		pm_val &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK | PORT_L1DS_MASK);
+		writel(pm_val, pm_addr);
+		/* flush write */
+		readl(pm_addr);
+		if (udev->usb2_hw_lpm_besl_capable) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_change_max_exit_latency(xhci, udev, 0);
+			readl_poll_timeout(ports[port_num]->addr, pm_val,
+					   (pm_val & PORT_PLS_MASK) == XDEV_U0,
+					   100, 10000);
+			return 0;
+		}
+	}
+
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return 0;
+}
+
+/* check if a usb2 port supports a given extened capability protocol
+ * only USB2 ports extended protocol capability values are cached.
+ * Return 1 if capability is supported
+ */
+static int xhci_check_usb2_port_capability(struct xhci_hcd *xhci, int port,
+					   unsigned capability)
+{
+	u32 port_offset, port_count;
+	int i;
+
+	for (i = 0; i < xhci->num_ext_caps; i++) {
+		if (xhci->ext_caps[i] & capability) {
+			/* port offsets starts at 1 */
+			port_offset = XHCI_EXT_PORT_OFF(xhci->ext_caps[i]) - 1;
+			port_count = XHCI_EXT_PORT_COUNT(xhci->ext_caps[i]);
+			if (port >= port_offset &&
+			    port < port_offset + port_count)
+				return 1;
+		}
+	}
+	return 0;
+}
+
+static int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int		portnum = udev->portnum - 1;
+
+	if (hcd->speed >= HCD_USB3 || !udev->lpm_capable)
+		return 0;
+
+	/* we only support lpm for non-hub device connected to root hub yet */
+	if (!udev->parent || udev->parent->parent ||
+			udev->descriptor.bDeviceClass == USB_CLASS_HUB)
+		return 0;
+
+	if (xhci->hw_lpm_support == 1 &&
+			xhci_check_usb2_port_capability(
+				xhci, portnum, XHCI_HLC)) {
+		udev->usb2_hw_lpm_capable = 1;
+		udev->l1_params.timeout = XHCI_L1_TIMEOUT;
+		udev->l1_params.besl = XHCI_DEFAULT_BESL;
+		if (xhci_check_usb2_port_capability(xhci, portnum,
+					XHCI_BLC))
+			udev->usb2_hw_lpm_besl_capable = 1;
+	}
+
+	return 0;
+}
+
+/*---------------------- USB 3.0 Link PM functions ------------------------*/
+
+/* Service interval in nanoseconds = 2^(bInterval - 1) * 125us * 1000ns / 1us */
+static unsigned long long xhci_service_interval_to_ns(
+		struct usb_endpoint_descriptor *desc)
+{
+	return (1ULL << (desc->bInterval - 1)) * 125 * 1000;
+}
+
+static u16 xhci_get_timeout_no_hub_lpm(struct usb_device *udev,
+		enum usb3_link_state state)
+{
+	unsigned long long sel;
+	unsigned long long pel;
+	unsigned int max_sel_pel;
+	char *state_name;
+
+	switch (state) {
+	case USB3_LPM_U1:
+		/* Convert SEL and PEL stored in nanoseconds to microseconds */
+		sel = DIV_ROUND_UP(udev->u1_params.sel, 1000);
+		pel = DIV_ROUND_UP(udev->u1_params.pel, 1000);
+		max_sel_pel = USB3_LPM_MAX_U1_SEL_PEL;
+		state_name = "U1";
+		break;
+	case USB3_LPM_U2:
+		sel = DIV_ROUND_UP(udev->u2_params.sel, 1000);
+		pel = DIV_ROUND_UP(udev->u2_params.pel, 1000);
+		max_sel_pel = USB3_LPM_MAX_U2_SEL_PEL;
+		state_name = "U2";
+		break;
+	default:
+		dev_warn(&udev->dev, "%s: Can't get timeout for non-U1 or U2 state.\n",
+				__func__);
+		return USB3_LPM_DISABLED;
+	}
+
+	if (sel <= max_sel_pel && pel <= max_sel_pel)
+		return USB3_LPM_DEVICE_INITIATED;
+
+	if (sel > max_sel_pel)
+		dev_dbg(&udev->dev, "Device-initiated %s disabled "
+				"due to long SEL %llu ms\n",
+				state_name, sel);
+	else
+		dev_dbg(&udev->dev, "Device-initiated %s disabled "
+				"due to long PEL %llu ms\n",
+				state_name, pel);
+	return USB3_LPM_DISABLED;
+}
+
+/* The U1 timeout should be the maximum of the following values:
+ *  - For control endpoints, U1 system exit latency (SEL) * 3
+ *  - For bulk endpoints, U1 SEL * 5
+ *  - For interrupt endpoints:
+ *    - Notification EPs, U1 SEL * 3
+ *    - Periodic EPs, max(105% of bInterval, U1 SEL * 2)
+ *  - For isochronous endpoints, max(105% of bInterval, U1 SEL * 2)
+ */
+static unsigned long long xhci_calculate_intel_u1_timeout(
+		struct usb_device *udev,
+		struct usb_endpoint_descriptor *desc)
+{
+	unsigned long long timeout_ns;
+	int ep_type;
+	int intr_type;
+
+	ep_type = usb_endpoint_type(desc);
+	switch (ep_type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		timeout_ns = udev->u1_params.sel * 3;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		timeout_ns = udev->u1_params.sel * 5;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		intr_type = usb_endpoint_interrupt_type(desc);
+		if (intr_type == USB_ENDPOINT_INTR_NOTIFICATION) {
+			timeout_ns = udev->u1_params.sel * 3;
+			break;
+		}
+		/* Otherwise the calculation is the same as isoc eps */
+		fallthrough;
+	case USB_ENDPOINT_XFER_ISOC:
+		timeout_ns = xhci_service_interval_to_ns(desc);
+		timeout_ns = DIV_ROUND_UP_ULL(timeout_ns * 105, 100);
+		if (timeout_ns < udev->u1_params.sel * 2)
+			timeout_ns = udev->u1_params.sel * 2;
+		break;
+	default:
+		return 0;
+	}
+
+	return timeout_ns;
+}
+
+/* Returns the hub-encoded U1 timeout value. */
+static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_endpoint_descriptor *desc)
+{
+	unsigned long long timeout_ns;
+
+	/* Prevent U1 if service interval is shorter than U1 exit latency */
+	if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
+		if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) {
+			dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n");
+			return USB3_LPM_DISABLED;
+		}
+	}
+
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
+	else
+		timeout_ns = udev->u1_params.sel;
+
+	/* The U1 timeout is encoded in 1us intervals.
+	 * Don't return a timeout of zero, because that's USB3_LPM_DISABLED.
+	 */
+	if (timeout_ns == USB3_LPM_DISABLED)
+		timeout_ns = 1;
+	else
+		timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 1000);
+
+	/* If the necessary timeout value is bigger than what we can set in the
+	 * USB 3.0 hub, we have to disable hub-initiated U1.
+	 */
+	if (timeout_ns <= USB3_LPM_U1_MAX_TIMEOUT)
+		return timeout_ns;
+	dev_dbg(&udev->dev, "Hub-initiated U1 disabled "
+			"due to long timeout %llu ms\n", timeout_ns);
+	return xhci_get_timeout_no_hub_lpm(udev, USB3_LPM_U1);
+}
+
+/* The U2 timeout should be the maximum of:
+ *  - 10 ms (to avoid the bandwidth impact on the scheduler)
+ *  - largest bInterval of any active periodic endpoint (to avoid going
+ *    into lower power link states between intervals).
+ *  - the U2 Exit Latency of the device
+ */
+static unsigned long long xhci_calculate_intel_u2_timeout(
+		struct usb_device *udev,
+		struct usb_endpoint_descriptor *desc)
+{
+	unsigned long long timeout_ns;
+	unsigned long long u2_del_ns;
+
+	timeout_ns = 10 * 1000 * 1000;
+
+	if ((usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) &&
+			(xhci_service_interval_to_ns(desc) > timeout_ns))
+		timeout_ns = xhci_service_interval_to_ns(desc);
+
+	u2_del_ns = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat) * 1000ULL;
+	if (u2_del_ns > timeout_ns)
+		timeout_ns = u2_del_ns;
+
+	return timeout_ns;
+}
+
+/* Returns the hub-encoded U2 timeout value. */
+static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_endpoint_descriptor *desc)
+{
+	unsigned long long timeout_ns;
+
+	/* Prevent U2 if service interval is shorter than U2 exit latency */
+	if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
+		if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) {
+			dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n");
+			return USB3_LPM_DISABLED;
+		}
+	}
+
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
+	else
+		timeout_ns = udev->u2_params.sel;
+
+	/* The U2 timeout is encoded in 256us intervals */
+	timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000);
+	/* If the necessary timeout value is bigger than what we can set in the
+	 * USB 3.0 hub, we have to disable hub-initiated U2.
+	 */
+	if (timeout_ns <= USB3_LPM_U2_MAX_TIMEOUT)
+		return timeout_ns;
+	dev_dbg(&udev->dev, "Hub-initiated U2 disabled "
+			"due to long timeout %llu ms\n", timeout_ns);
+	return xhci_get_timeout_no_hub_lpm(udev, USB3_LPM_U2);
+}
+
+static u16 xhci_call_host_update_timeout_for_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_endpoint_descriptor *desc,
+		enum usb3_link_state state,
+		u16 *timeout)
+{
+	if (state == USB3_LPM_U1)
+		return xhci_calculate_u1_timeout(xhci, udev, desc);
+	else if (state == USB3_LPM_U2)
+		return xhci_calculate_u2_timeout(xhci, udev, desc);
+
+	return USB3_LPM_DISABLED;
+}
+
+static int xhci_update_timeout_for_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_endpoint_descriptor *desc,
+		enum usb3_link_state state,
+		u16 *timeout)
+{
+	u16 alt_timeout;
+
+	alt_timeout = xhci_call_host_update_timeout_for_endpoint(xhci, udev,
+		desc, state, timeout);
+
+	/* If we found we can't enable hub-initiated LPM, and
+	 * the U1 or U2 exit latency was too high to allow
+	 * device-initiated LPM as well, then we will disable LPM
+	 * for this device, so stop searching any further.
+	 */
+	if (alt_timeout == USB3_LPM_DISABLED) {
+		*timeout = alt_timeout;
+		return -E2BIG;
+	}
+	if (alt_timeout > *timeout)
+		*timeout = alt_timeout;
+	return 0;
+}
+
+static int xhci_update_timeout_for_interface(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_host_interface *alt,
+		enum usb3_link_state state,
+		u16 *timeout)
+{
+	int j;
+
+	for (j = 0; j < alt->desc.bNumEndpoints; j++) {
+		if (xhci_update_timeout_for_endpoint(xhci, udev,
+					&alt->endpoint[j].desc, state, timeout))
+			return -E2BIG;
+	}
+	return 0;
+}
+
+static int xhci_check_intel_tier_policy(struct usb_device *udev,
+		enum usb3_link_state state)
+{
+	struct usb_device *parent;
+	unsigned int num_hubs;
+
+	/* Don't enable U1 if the device is on a 2nd tier hub or lower. */
+	for (parent = udev->parent, num_hubs = 0; parent->parent;
+			parent = parent->parent)
+		num_hubs++;
+
+	if (num_hubs < 2)
+		return 0;
+
+	dev_dbg(&udev->dev, "Disabling U1/U2 link state for device"
+			" below second-tier hub.\n");
+	dev_dbg(&udev->dev, "Plug device into first-tier hub "
+			"to decrease power consumption.\n");
+	return -E2BIG;
+}
+
+static int xhci_check_tier_policy(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		enum usb3_link_state state)
+{
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		return xhci_check_intel_tier_policy(udev, state);
+	else
+		return 0;
+}
+
+/* Returns the U1 or U2 timeout that should be enabled.
+ * If the tier check or timeout setting functions return with a non-zero exit
+ * code, that means the timeout value has been finalized and we shouldn't look
+ * at any more endpoints.
+ */
+static u16 xhci_calculate_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct usb_host_config *config;
+	char *state_name;
+	int i;
+	u16 timeout = USB3_LPM_DISABLED;
+
+	if (state == USB3_LPM_U1)
+		state_name = "U1";
+	else if (state == USB3_LPM_U2)
+		state_name = "U2";
+	else {
+		dev_warn(&udev->dev, "Can't enable unknown link state %i\n",
+				state);
+		return timeout;
+	}
+
+	/* Gather some information about the currently installed configuration
+	 * and alternate interface settings.
+	 */
+	if (xhci_update_timeout_for_endpoint(xhci, udev, &udev->ep0.desc,
+			state, &timeout))
+		return timeout;
+
+	config = udev->actconfig;
+	if (!config)
+		return timeout;
+
+	for (i = 0; i < config->desc.bNumInterfaces; i++) {
+		struct usb_driver *driver;
+		struct usb_interface *intf = config->interface[i];
+
+		if (!intf)
+			continue;
+
+		/* Check if any currently bound drivers want hub-initiated LPM
+		 * disabled.
+		 */
+		if (intf->dev.driver) {
+			driver = to_usb_driver(intf->dev.driver);
+			if (driver && driver->disable_hub_initiated_lpm) {
+				dev_dbg(&udev->dev, "Hub-initiated %s disabled at request of driver %s\n",
+					state_name, driver->name);
+				timeout = xhci_get_timeout_no_hub_lpm(udev,
+								      state);
+				if (timeout == USB3_LPM_DISABLED)
+					return timeout;
+			}
+		}
+
+		/* Not sure how this could happen... */
+		if (!intf->cur_altsetting)
+			continue;
+
+		if (xhci_update_timeout_for_interface(xhci, udev,
+					intf->cur_altsetting,
+					state, &timeout))
+			return timeout;
+	}
+	return timeout;
+}
+
+static int calculate_max_exit_latency(struct usb_device *udev,
+		enum usb3_link_state state_changed,
+		u16 hub_encoded_timeout)
+{
+	unsigned long long u1_mel_us = 0;
+	unsigned long long u2_mel_us = 0;
+	unsigned long long mel_us = 0;
+	bool disabling_u1;
+	bool disabling_u2;
+	bool enabling_u1;
+	bool enabling_u2;
+
+	disabling_u1 = (state_changed == USB3_LPM_U1 &&
+			hub_encoded_timeout == USB3_LPM_DISABLED);
+	disabling_u2 = (state_changed == USB3_LPM_U2 &&
+			hub_encoded_timeout == USB3_LPM_DISABLED);
+
+	enabling_u1 = (state_changed == USB3_LPM_U1 &&
+			hub_encoded_timeout != USB3_LPM_DISABLED);
+	enabling_u2 = (state_changed == USB3_LPM_U2 &&
+			hub_encoded_timeout != USB3_LPM_DISABLED);
+
+	/* If U1 was already enabled and we're not disabling it,
+	 * or we're going to enable U1, account for the U1 max exit latency.
+	 */
+	if ((udev->u1_params.timeout != USB3_LPM_DISABLED && !disabling_u1) ||
+			enabling_u1)
+		u1_mel_us = DIV_ROUND_UP(udev->u1_params.mel, 1000);
+	if ((udev->u2_params.timeout != USB3_LPM_DISABLED && !disabling_u2) ||
+			enabling_u2)
+		u2_mel_us = DIV_ROUND_UP(udev->u2_params.mel, 1000);
+
+	mel_us = max(u1_mel_us, u2_mel_us);
+
+	/* xHCI host controller max exit latency field is only 16 bits wide. */
+	if (mel_us > MAX_EXIT) {
+		dev_warn(&udev->dev, "Link PM max exit latency of %lluus "
+				"is too big.\n", mel_us);
+		return -E2BIG;
+	}
+	return mel_us;
+}
+
+/* Returns the USB3 hub-encoded value for the U1/U2 timeout. */
+static int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state)
+{
+	struct xhci_hcd	*xhci;
+	struct xhci_port *port;
+	u16 hub_encoded_timeout;
+	int mel;
+	int ret;
+
+	xhci = hcd_to_xhci(hcd);
+	/* The LPM timeout values are pretty host-controller specific, so don't
+	 * enable hub-initiated timeouts unless the vendor has provided
+	 * information about their timeout algorithm.
+	 */
+	if (!xhci || !(xhci->quirks & XHCI_LPM_SUPPORT) ||
+			!xhci->devs[udev->slot_id])
+		return USB3_LPM_DISABLED;
+
+	if (xhci_check_tier_policy(xhci, udev, state) < 0)
+		return USB3_LPM_DISABLED;
+
+	/* If connected to root port then check port can handle lpm */
+	if (udev->parent && !udev->parent->parent) {
+		port = xhci->usb3_rhub.ports[udev->portnum - 1];
+		if (port->lpm_incapable)
+			return USB3_LPM_DISABLED;
+	}
+
+	hub_encoded_timeout = xhci_calculate_lpm_timeout(hcd, udev, state);
+	mel = calculate_max_exit_latency(udev, state, hub_encoded_timeout);
+	if (mel < 0) {
+		/* Max Exit Latency is too big, disable LPM. */
+		hub_encoded_timeout = USB3_LPM_DISABLED;
+		mel = 0;
+	}
+
+	ret = xhci_change_max_exit_latency(xhci, udev, mel);
+	if (ret)
+		return ret;
+	return hub_encoded_timeout;
+}
+
+static int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state)
+{
+	struct xhci_hcd	*xhci;
+	u16 mel;
+
+	xhci = hcd_to_xhci(hcd);
+	if (!xhci || !(xhci->quirks & XHCI_LPM_SUPPORT) ||
+			!xhci->devs[udev->slot_id])
+		return 0;
+
+	mel = calculate_max_exit_latency(udev, state, USB3_LPM_DISABLED);
+	return xhci_change_max_exit_latency(xhci, udev, mel);
+}
+#else /* CONFIG_PM */
+
+static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
+				struct usb_device *udev, int enable)
+{
+	return 0;
+}
+
+static int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	return 0;
+}
+
+static int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state)
+{
+	return USB3_LPM_DISABLED;
+}
+
+static int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state)
+{
+	return 0;
+}
+#endif	/* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+/* Once a hub descriptor is fetched for a device, we need to update the xHC's
+ * internal data structures for the device.
+ */
+int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
+			struct usb_tt *tt, gfp_t mem_flags)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct xhci_virt_device *vdev;
+	struct xhci_command *config_cmd;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_slot_ctx *slot_ctx;
+	unsigned long flags;
+	unsigned think_time;
+	int ret;
+
+	/* Ignore root hubs */
+	if (!hdev->parent)
+		return 0;
+
+	vdev = xhci->devs[hdev->slot_id];
+	if (!vdev) {
+		xhci_warn(xhci, "Cannot update hub desc for unknown device.\n");
+		return -EINVAL;
+	}
+
+	config_cmd = xhci_alloc_command_with_ctx(xhci, true, mem_flags);
+	if (!config_cmd)
+		return -ENOMEM;
+
+	ctrl_ctx = xhci_get_input_control_ctx(config_cmd->in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		xhci_free_command(xhci, config_cmd);
+		return -ENOMEM;
+	}
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (hdev->speed == USB_SPEED_HIGH &&
+			xhci_alloc_tt_info(xhci, vdev, hdev, tt, GFP_ATOMIC)) {
+		xhci_dbg(xhci, "Could not allocate xHCI TT structure.\n");
+		xhci_free_command(xhci, config_cmd);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return -ENOMEM;
+	}
+
+	xhci_slot_copy(xhci, config_cmd->in_ctx, vdev->out_ctx);
+	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+	slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx);
+	slot_ctx->dev_info |= cpu_to_le32(DEV_HUB);
+	/*
+	 * refer to section 6.2.2: MTT should be 0 for full speed hub,
+	 * but it may be already set to 1 when setup an xHCI virtual
+	 * device, so clear it anyway.
+	 */
+	if (tt->multi)
+		slot_ctx->dev_info |= cpu_to_le32(DEV_MTT);
+	else if (hdev->speed == USB_SPEED_FULL)
+		slot_ctx->dev_info &= cpu_to_le32(~DEV_MTT);
+
+	if (xhci->hci_version > 0x95) {
+		xhci_dbg(xhci, "xHCI version %x needs hub "
+				"TT think time and number of ports\n",
+				(unsigned int) xhci->hci_version);
+		slot_ctx->dev_info2 |= cpu_to_le32(XHCI_MAX_PORTS(hdev->maxchild));
+		/* Set TT think time - convert from ns to FS bit times.
+		 * 0 = 8 FS bit times, 1 = 16 FS bit times,
+		 * 2 = 24 FS bit times, 3 = 32 FS bit times.
+		 *
+		 * xHCI 1.0: this field shall be 0 if the device is not a
+		 * High-spped hub.
+		 */
+		think_time = tt->think_time;
+		if (think_time != 0)
+			think_time = (think_time / 666) - 1;
+		if (xhci->hci_version < 0x100 || hdev->speed == USB_SPEED_HIGH)
+			slot_ctx->tt_info |=
+				cpu_to_le32(TT_THINK_TIME(think_time));
+	} else {
+		xhci_dbg(xhci, "xHCI version %x doesn't need hub "
+				"TT think time or number of ports\n",
+				(unsigned int) xhci->hci_version);
+	}
+	slot_ctx->dev_state = 0;
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	xhci_dbg(xhci, "Set up %s for hub device.\n",
+			(xhci->hci_version > 0x95) ?
+			"configure endpoint" : "evaluate context");
+
+	/* Issue and wait for the configure endpoint or
+	 * evaluate context command.
+	 */
+	if (xhci->hci_version > 0x95)
+		ret = xhci_configure_endpoint(xhci, hdev, config_cmd,
+				false, false);
+	else
+		ret = xhci_configure_endpoint(xhci, hdev, config_cmd,
+				true, false);
+
+	xhci_free_command(xhci, config_cmd);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(xhci_update_hub_device);
+
+static int xhci_get_frame(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	/* EHCI mods by the periodic size.  Why? */
+	return readl(&xhci->run_regs->microframe_index) >> 3;
+}
+
+static void xhci_hcd_init_usb2_data(struct xhci_hcd *xhci, struct usb_hcd *hcd)
+{
+	xhci->usb2_rhub.hcd = hcd;
+	hcd->speed = HCD_USB2;
+	hcd->self.root_hub->speed = USB_SPEED_HIGH;
+	/*
+	 * USB 2.0 roothub under xHCI has an integrated TT,
+	 * (rate matching hub) as opposed to having an OHCI/UHCI
+	 * companion controller.
+	 */
+	hcd->has_tt = 1;
+}
+
+static void xhci_hcd_init_usb3_data(struct xhci_hcd *xhci, struct usb_hcd *hcd)
+{
+	unsigned int minor_rev;
+
+	/*
+	 * Early xHCI 1.1 spec did not mention USB 3.1 capable hosts
+	 * should return 0x31 for sbrn, or that the minor revision
+	 * is a two digit BCD containig minor and sub-minor numbers.
+	 * This was later clarified in xHCI 1.2.
+	 *
+	 * Some USB 3.1 capable hosts therefore have sbrn 0x30, and
+	 * minor revision set to 0x1 instead of 0x10.
+	 */
+	if (xhci->usb3_rhub.min_rev == 0x1)
+		minor_rev = 1;
+	else
+		minor_rev = xhci->usb3_rhub.min_rev / 0x10;
+
+	switch (minor_rev) {
+	case 2:
+		hcd->speed = HCD_USB32;
+		hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
+		hcd->self.root_hub->rx_lanes = 2;
+		hcd->self.root_hub->tx_lanes = 2;
+		hcd->self.root_hub->ssp_rate = USB_SSP_GEN_2x2;
+		break;
+	case 1:
+		hcd->speed = HCD_USB31;
+		hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
+		hcd->self.root_hub->ssp_rate = USB_SSP_GEN_2x1;
+		break;
+	}
+	xhci_info(xhci, "Host supports USB 3.%x %sSuperSpeed\n",
+		  minor_rev, minor_rev ? "Enhanced " : "");
+
+	xhci->usb3_rhub.hcd = hcd;
+}
+
+int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
+{
+	struct xhci_hcd		*xhci;
+	/*
+	 * TODO: Check with DWC3 clients for sysdev according to
+	 * quirks
+	 */
+	struct device		*dev = hcd->self.sysdev;
+	int			retval;
+
+	/* Accept arbitrarily long scatter-gather lists */
+	hcd->self.sg_tablesize = ~0;
+
+	/* support to build packet from discontinuous buffers */
+	hcd->self.no_sg_constraint = 1;
+
+	/* XHCI controllers don't stop the ep queue on short packets :| */
+	hcd->self.no_stop_on_short = 1;
+
+	xhci = hcd_to_xhci(hcd);
+
+	if (!usb_hcd_is_primary_hcd(hcd)) {
+		xhci_hcd_init_usb3_data(xhci, hcd);
+		return 0;
+	}
+
+	mutex_init(&xhci->mutex);
+	xhci->main_hcd = hcd;
+	xhci->cap_regs = hcd->regs;
+	xhci->op_regs = hcd->regs +
+		HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
+	xhci->run_regs = hcd->regs +
+		(readl(&xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
+	/* Cache read-only capability registers */
+	xhci->hcs_params1 = readl(&xhci->cap_regs->hcs_params1);
+	xhci->hcs_params2 = readl(&xhci->cap_regs->hcs_params2);
+	xhci->hcs_params3 = readl(&xhci->cap_regs->hcs_params3);
+	xhci->hci_version = HC_VERSION(readl(&xhci->cap_regs->hc_capbase));
+	xhci->hcc_params = readl(&xhci->cap_regs->hcc_params);
+	if (xhci->hci_version > 0x100)
+		xhci->hcc_params2 = readl(&xhci->cap_regs->hcc_params2);
+
+	xhci->quirks |= quirks;
+
+	get_quirks(dev, xhci);
+
+	/* In xhci controllers which follow xhci 1.0 spec gives a spurious
+	 * success event after a short transfer. This quirk will ignore such
+	 * spurious event.
+	 */
+	if (xhci->hci_version > 0x96)
+		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
+
+	/* Make sure the HC is halted. */
+	retval = xhci_halt(xhci);
+	if (retval)
+		return retval;
+
+	xhci_zero_64b_regs(xhci);
+
+	xhci_dbg(xhci, "Resetting HCD\n");
+	/* Reset the internal HC memory state and registers. */
+	retval = xhci_reset(xhci, XHCI_RESET_LONG_USEC);
+	if (retval)
+		return retval;
+	xhci_dbg(xhci, "Reset complete\n");
+
+	/*
+	 * On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0)
+	 * of HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit
+	 * address memory pointers actually. So, this driver clears the AC64
+	 * bit of xhci->hcc_params to call dma_set_coherent_mask(dev,
+	 * DMA_BIT_MASK(32)) in this xhci_gen_setup().
+	 */
+	if (xhci->quirks & XHCI_NO_64BIT_SUPPORT)
+		xhci->hcc_params &= ~BIT(0);
+
+	/* Set dma_mask and coherent_dma_mask to 64-bits,
+	 * if xHC supports 64-bit addressing */
+	if (HCC_64BIT_ADDR(xhci->hcc_params) &&
+			!dma_set_mask(dev, DMA_BIT_MASK(64))) {
+		xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
+		dma_set_coherent_mask(dev, DMA_BIT_MASK(64));
+	} else {
+		/*
+		 * This is to avoid error in cases where a 32-bit USB
+		 * controller is used on a 64-bit capable system.
+		 */
+		retval = dma_set_mask(dev, DMA_BIT_MASK(32));
+		if (retval)
+			return retval;
+		xhci_dbg(xhci, "Enabling 32-bit DMA addresses.\n");
+		dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
+	}
+
+	xhci_dbg(xhci, "Calling HCD init\n");
+	/* Initialize HCD and host controller data structures. */
+	retval = xhci_init(hcd);
+	if (retval)
+		return retval;
+	xhci_dbg(xhci, "Called HCD init\n");
+
+	if (xhci_hcd_is_usb3(hcd))
+		xhci_hcd_init_usb3_data(xhci, hcd);
+	else
+		xhci_hcd_init_usb2_data(xhci, hcd);
+
+	xhci_info(xhci, "hcc params 0x%08x hci version 0x%x quirks 0x%016llx\n",
+		  xhci->hcc_params, xhci->hci_version, xhci->quirks);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xhci_gen_setup);
+
+static void xhci_clear_tt_buffer_complete(struct usb_hcd *hcd,
+		struct usb_host_endpoint *ep)
+{
+	struct xhci_hcd *xhci;
+	struct usb_device *udev;
+	unsigned int slot_id;
+	unsigned int ep_index;
+	unsigned long flags;
+
+	xhci = hcd_to_xhci(hcd);
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	udev = (struct usb_device *)ep->hcpriv;
+	slot_id = udev->slot_id;
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+
+	xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_CLEARING_TT;
+	xhci_ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
+static const struct hc_driver xhci_hc_driver = {
+	.description =		"xhci-hcd",
+	.product_desc =		"xHCI Host Controller",
+	.hcd_priv_size =	sizeof(struct xhci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			xhci_irq,
+	.flags =		HCD_MEMORY | HCD_DMA | HCD_USB3 | HCD_SHARED |
+				HCD_BH,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset =		NULL, /* set in xhci_init_driver() */
+	.start =		xhci_run,
+	.stop =			xhci_stop,
+	.shutdown =		xhci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.map_urb_for_dma =      xhci_map_urb_for_dma,
+	.unmap_urb_for_dma =    xhci_unmap_urb_for_dma,
+	.urb_enqueue =		xhci_urb_enqueue,
+	.urb_dequeue =		xhci_urb_dequeue,
+	.alloc_dev =		xhci_alloc_dev,
+	.free_dev =		xhci_free_dev,
+	.alloc_streams =	xhci_alloc_streams,
+	.free_streams =		xhci_free_streams,
+	.add_endpoint =		xhci_add_endpoint,
+	.drop_endpoint =	xhci_drop_endpoint,
+	.endpoint_disable =	xhci_endpoint_disable,
+	.endpoint_reset =	xhci_endpoint_reset,
+	.check_bandwidth =	xhci_check_bandwidth,
+	.reset_bandwidth =	xhci_reset_bandwidth,
+	.address_device =	xhci_address_device,
+	.enable_device =	xhci_enable_device,
+	.update_hub_device =	xhci_update_hub_device,
+	.reset_device =		xhci_discover_or_reset_device,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	xhci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_control =		xhci_hub_control,
+	.hub_status_data =	xhci_hub_status_data,
+	.bus_suspend =		xhci_bus_suspend,
+	.bus_resume =		xhci_bus_resume,
+	.get_resuming_ports =	xhci_get_resuming_ports,
+
+	/*
+	 * call back when device connected and addressed
+	 */
+	.update_device =        xhci_update_device,
+	.set_usb2_hw_lpm =	xhci_set_usb2_hardware_lpm,
+	.enable_usb3_lpm_timeout =	xhci_enable_usb3_lpm_timeout,
+	.disable_usb3_lpm_timeout =	xhci_disable_usb3_lpm_timeout,
+	.find_raw_port_number =	xhci_find_raw_port_number,
+	.clear_tt_buffer_complete = xhci_clear_tt_buffer_complete,
+};
+
+void xhci_init_driver(struct hc_driver *drv,
+		      const struct xhci_driver_overrides *over)
+{
+	BUG_ON(!over);
+
+	/* Copy the generic table to drv then apply the overrides */
+	*drv = xhci_hc_driver;
+
+	if (over) {
+		drv->hcd_priv_size += over->extra_priv_size;
+		if (over->reset)
+			drv->reset = over->reset;
+		if (over->start)
+			drv->start = over->start;
+		if (over->add_endpoint)
+			drv->add_endpoint = over->add_endpoint;
+		if (over->drop_endpoint)
+			drv->drop_endpoint = over->drop_endpoint;
+		if (over->check_bandwidth)
+			drv->check_bandwidth = over->check_bandwidth;
+		if (over->reset_bandwidth)
+			drv->reset_bandwidth = over->reset_bandwidth;
+		if (over->update_hub_device)
+			drv->update_hub_device = over->update_hub_device;
+	}
+}
+EXPORT_SYMBOL_GPL(xhci_init_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+
+static int __init xhci_hcd_init(void)
+{
+	/*
+	 * Check the compiler generated sizes of structures that must be laid
+	 * out in specific ways for hardware access.
+	 */
+	BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_slot_ctx) != 8*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_ep_ctx) != 8*32/8);
+	/* xhci_device_control has eight fields, and also
+	 * embeds one xhci_slot_ctx and 31 xhci_ep_ctx
+	 */
+	BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8);
+	BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_cap_regs) != 8*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
+	/* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
+	BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	xhci_debugfs_create_root();
+	xhci_dbc_init();
+
+	return 0;
+}
+
+/*
+ * If an init function is provided, an exit function must also be provided
+ * to allow module unload.
+ */
+static void __exit xhci_hcd_fini(void)
+{
+	xhci_debugfs_remove_root();
+	xhci_dbc_exit();
+}
+
+module_init(xhci_hcd_init);
+module_exit(xhci_hcd_fini);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
new file mode 100644
index 000000000..1354310cb
--- /dev/null
+++ b/drivers/usb/host/xhci.h
@@ -0,0 +1,2807 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ */
+
+#ifndef __LINUX_XHCI_HCD_H
+#define __LINUX_XHCI_HCD_H
+
+#include <linux/usb.h>
+#include <linux/timer.h>
+#include <linux/kernel.h>
+#include <linux/usb/hcd.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+
+/* Code sharing between pci-quirks and xhci hcd */
+#include	"xhci-ext-caps.h"
+#include "pci-quirks.h"
+
+/* max buffer size for trace and debug messages */
+#define XHCI_MSG_MAX		500
+
+/* xHCI PCI Configuration Registers */
+#define XHCI_SBRN_OFFSET	(0x60)
+
+/* Max number of USB devices for any host controller - limit in section 6.1 */
+#define MAX_HC_SLOTS		256
+/* Section 5.3.3 - MaxPorts */
+#define MAX_HC_PORTS		127
+
+/*
+ * xHCI register interface.
+ * This corresponds to the eXtensible Host Controller Interface (xHCI)
+ * Revision 0.95 specification
+ */
+
+/**
+ * struct xhci_cap_regs - xHCI Host Controller Capability Registers.
+ * @hc_capbase:		length of the capabilities register and HC version number
+ * @hcs_params1:	HCSPARAMS1 - Structural Parameters 1
+ * @hcs_params2:	HCSPARAMS2 - Structural Parameters 2
+ * @hcs_params3:	HCSPARAMS3 - Structural Parameters 3
+ * @hcc_params:		HCCPARAMS - Capability Parameters
+ * @db_off:		DBOFF - Doorbell array offset
+ * @run_regs_off:	RTSOFF - Runtime register space offset
+ * @hcc_params2:	HCCPARAMS2 Capability Parameters 2, xhci 1.1 only
+ */
+struct xhci_cap_regs {
+	__le32	hc_capbase;
+	__le32	hcs_params1;
+	__le32	hcs_params2;
+	__le32	hcs_params3;
+	__le32	hcc_params;
+	__le32	db_off;
+	__le32	run_regs_off;
+	__le32	hcc_params2; /* xhci 1.1 */
+	/* Reserved up to (CAPLENGTH - 0x1C) */
+};
+
+/* hc_capbase bitmasks */
+/* bits 7:0 - how long is the Capabilities register */
+#define HC_LENGTH(p)		XHCI_HC_LENGTH(p)
+/* bits 31:16	*/
+#define HC_VERSION(p)		(((p) >> 16) & 0xffff)
+
+/* HCSPARAMS1 - hcs_params1 - bitmasks */
+/* bits 0:7, Max Device Slots */
+#define HCS_MAX_SLOTS(p)	(((p) >> 0) & 0xff)
+#define HCS_SLOTS_MASK		0xff
+/* bits 8:18, Max Interrupters */
+#define HCS_MAX_INTRS(p)	(((p) >> 8) & 0x7ff)
+/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
+#define HCS_MAX_PORTS(p)	(((p) >> 24) & 0x7f)
+
+/* HCSPARAMS2 - hcs_params2 - bitmasks */
+/* bits 0:3, frames or uframes that SW needs to queue transactions
+ * ahead of the HW to meet periodic deadlines */
+#define HCS_IST(p)		(((p) >> 0) & 0xf)
+/* bits 4:7, max number of Event Ring segments */
+#define HCS_ERST_MAX(p)		(((p) >> 4) & 0xf)
+/* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */
+/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
+/* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */
+#define HCS_MAX_SCRATCHPAD(p)   ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f))
+
+/* HCSPARAMS3 - hcs_params3 - bitmasks */
+/* bits 0:7, Max U1 to U0 latency for the roothub ports */
+#define HCS_U1_LATENCY(p)	(((p) >> 0) & 0xff)
+/* bits 16:31, Max U2 to U0 latency for the roothub ports */
+#define HCS_U2_LATENCY(p)	(((p) >> 16) & 0xffff)
+
+/* HCCPARAMS - hcc_params - bitmasks */
+/* true: HC can use 64-bit address pointers */
+#define HCC_64BIT_ADDR(p)	((p) & (1 << 0))
+/* true: HC can do bandwidth negotiation */
+#define HCC_BANDWIDTH_NEG(p)	((p) & (1 << 1))
+/* true: HC uses 64-byte Device Context structures
+ * FIXME 64-byte context structures aren't supported yet.
+ */
+#define HCC_64BYTE_CONTEXT(p)	((p) & (1 << 2))
+/* true: HC has port power switches */
+#define HCC_PPC(p)		((p) & (1 << 3))
+/* true: HC has port indicators */
+#define HCS_INDICATOR(p)	((p) & (1 << 4))
+/* true: HC has Light HC Reset Capability */
+#define HCC_LIGHT_RESET(p)	((p) & (1 << 5))
+/* true: HC supports latency tolerance messaging */
+#define HCC_LTC(p)		((p) & (1 << 6))
+/* true: no secondary Stream ID Support */
+#define HCC_NSS(p)		((p) & (1 << 7))
+/* true: HC supports Stopped - Short Packet */
+#define HCC_SPC(p)		((p) & (1 << 9))
+/* true: HC has Contiguous Frame ID Capability */
+#define HCC_CFC(p)		((p) & (1 << 11))
+/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
+#define HCC_MAX_PSA(p)		(1 << ((((p) >> 12) & 0xf) + 1))
+/* Extended Capabilities pointer from PCI base - section 5.3.6 */
+#define HCC_EXT_CAPS(p)		XHCI_HCC_EXT_CAPS(p)
+
+#define CTX_SIZE(_hcc)		(HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
+
+/* db_off bitmask - bits 0:1 reserved */
+#define	DBOFF_MASK	(~0x3)
+
+/* run_regs_off bitmask - bits 0:4 reserved */
+#define	RTSOFF_MASK	(~0x1f)
+
+/* HCCPARAMS2 - hcc_params2 - bitmasks */
+/* true: HC supports U3 entry Capability */
+#define	HCC2_U3C(p)		((p) & (1 << 0))
+/* true: HC supports Configure endpoint command Max exit latency too large */
+#define	HCC2_CMC(p)		((p) & (1 << 1))
+/* true: HC supports Force Save context Capability */
+#define	HCC2_FSC(p)		((p) & (1 << 2))
+/* true: HC supports Compliance Transition Capability */
+#define	HCC2_CTC(p)		((p) & (1 << 3))
+/* true: HC support Large ESIT payload Capability > 48k */
+#define	HCC2_LEC(p)		((p) & (1 << 4))
+/* true: HC support Configuration Information Capability */
+#define	HCC2_CIC(p)		((p) & (1 << 5))
+/* true: HC support Extended TBC Capability, Isoc burst count > 65535 */
+#define	HCC2_ETC(p)		((p) & (1 << 6))
+
+/* Number of registers per port */
+#define	NUM_PORT_REGS	4
+
+#define PORTSC		0
+#define PORTPMSC	1
+#define PORTLI		2
+#define PORTHLPMC	3
+
+/**
+ * struct xhci_op_regs - xHCI Host Controller Operational Registers.
+ * @command:		USBCMD - xHC command register
+ * @status:		USBSTS - xHC status register
+ * @page_size:		This indicates the page size that the host controller
+ * 			supports.  If bit n is set, the HC supports a page size
+ * 			of 2^(n+12), up to a 128MB page size.
+ * 			4K is the minimum page size.
+ * @cmd_ring:		CRP - 64-bit Command Ring Pointer
+ * @dcbaa_ptr:		DCBAAP - 64-bit Device Context Base Address Array Pointer
+ * @config_reg:		CONFIG - Configure Register
+ * @port_status_base:	PORTSCn - base address for Port Status and Control
+ * 			Each port has a Port Status and Control register,
+ * 			followed by a Port Power Management Status and Control
+ * 			register, a Port Link Info register, and a reserved
+ * 			register.
+ * @port_power_base:	PORTPMSCn - base address for
+ * 			Port Power Management Status and Control
+ * @port_link_base:	PORTLIn - base address for Port Link Info (current
+ * 			Link PM state and control) for USB 2.1 and USB 3.0
+ * 			devices.
+ */
+struct xhci_op_regs {
+	__le32	command;
+	__le32	status;
+	__le32	page_size;
+	__le32	reserved1;
+	__le32	reserved2;
+	__le32	dev_notification;
+	__le64	cmd_ring;
+	/* rsvd: offset 0x20-2F */
+	__le32	reserved3[4];
+	__le64	dcbaa_ptr;
+	__le32	config_reg;
+	/* rsvd: offset 0x3C-3FF */
+	__le32	reserved4[241];
+	/* port 1 registers, which serve as a base address for other ports */
+	__le32	port_status_base;
+	__le32	port_power_base;
+	__le32	port_link_base;
+	__le32	reserved5;
+	/* registers for ports 2-255 */
+	__le32	reserved6[NUM_PORT_REGS*254];
+};
+
+/* USBCMD - USB command - command bitmasks */
+/* start/stop HC execution - do not write unless HC is halted*/
+#define CMD_RUN		XHCI_CMD_RUN
+/* Reset HC - resets internal HC state machine and all registers (except
+ * PCI config regs).  HC does NOT drive a USB reset on the downstream ports.
+ * The xHCI driver must reinitialize the xHC after setting this bit.
+ */
+#define CMD_RESET	(1 << 1)
+/* Event Interrupt Enable - a '1' allows interrupts from the host controller */
+#define CMD_EIE		XHCI_CMD_EIE
+/* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
+#define CMD_HSEIE	XHCI_CMD_HSEIE
+/* bits 4:6 are reserved (and should be preserved on writes). */
+/* light reset (port status stays unchanged) - reset completed when this is 0 */
+#define CMD_LRESET	(1 << 7)
+/* host controller save/restore state. */
+#define CMD_CSS		(1 << 8)
+#define CMD_CRS		(1 << 9)
+/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
+#define CMD_EWE		XHCI_CMD_EWE
+/* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
+ * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
+ * '0' means the xHC can power it off if all ports are in the disconnect,
+ * disabled, or powered-off state.
+ */
+#define CMD_PM_INDEX	(1 << 11)
+/* bit 14 Extended TBC Enable, changes Isoc TRB fields to support larger TBC */
+#define CMD_ETE		(1 << 14)
+/* bits 15:31 are reserved (and should be preserved on writes). */
+
+#define XHCI_RESET_LONG_USEC		(10 * 1000 * 1000)
+#define XHCI_RESET_SHORT_USEC		(250 * 1000)
+
+/* IMAN - Interrupt Management Register */
+#define IMAN_IE		(1 << 1)
+#define IMAN_IP		(1 << 0)
+
+/* USBSTS - USB status - status bitmasks */
+/* HC not running - set to 1 when run/stop bit is cleared. */
+#define STS_HALT	XHCI_STS_HALT
+/* serious error, e.g. PCI parity error.  The HC will clear the run/stop bit. */
+#define STS_FATAL	(1 << 2)
+/* event interrupt - clear this prior to clearing any IP flags in IR set*/
+#define STS_EINT	(1 << 3)
+/* port change detect */
+#define STS_PORT	(1 << 4)
+/* bits 5:7 reserved and zeroed */
+/* save state status - '1' means xHC is saving state */
+#define STS_SAVE	(1 << 8)
+/* restore state status - '1' means xHC is restoring state */
+#define STS_RESTORE	(1 << 9)
+/* true: save or restore error */
+#define STS_SRE		(1 << 10)
+/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
+#define STS_CNR		XHCI_STS_CNR
+/* true: internal Host Controller Error - SW needs to reset and reinitialize */
+#define STS_HCE		(1 << 12)
+/* bits 13:31 reserved and should be preserved */
+
+/*
+ * DNCTRL - Device Notification Control Register - dev_notification bitmasks
+ * Generate a device notification event when the HC sees a transaction with a
+ * notification type that matches a bit set in this bit field.
+ */
+#define	DEV_NOTE_MASK		(0xffff)
+#define ENABLE_DEV_NOTE(x)	(1 << (x))
+/* Most of the device notification types should only be used for debug.
+ * SW does need to pay attention to function wake notifications.
+ */
+#define	DEV_NOTE_FWAKE		ENABLE_DEV_NOTE(1)
+
+/* CRCR - Command Ring Control Register - cmd_ring bitmasks */
+/* bit 0 is the command ring cycle state */
+/* stop ring operation after completion of the currently executing command */
+#define CMD_RING_PAUSE		(1 << 1)
+/* stop ring immediately - abort the currently executing command */
+#define CMD_RING_ABORT		(1 << 2)
+/* true: command ring is running */
+#define CMD_RING_RUNNING	(1 << 3)
+/* bits 4:5 reserved and should be preserved */
+/* Command Ring pointer - bit mask for the lower 32 bits. */
+#define CMD_RING_RSVD_BITS	(0x3f)
+
+/* CONFIG - Configure Register - config_reg bitmasks */
+/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
+#define MAX_DEVS(p)	((p) & 0xff)
+/* bit 8: U3 Entry Enabled, assert PLC when root port enters U3, xhci 1.1 */
+#define CONFIG_U3E		(1 << 8)
+/* bit 9: Configuration Information Enable, xhci 1.1 */
+#define CONFIG_CIE		(1 << 9)
+/* bits 10:31 - reserved and should be preserved */
+
+/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
+/* true: device connected */
+#define PORT_CONNECT	(1 << 0)
+/* true: port enabled */
+#define PORT_PE		(1 << 1)
+/* bit 2 reserved and zeroed */
+/* true: port has an over-current condition */
+#define PORT_OC		(1 << 3)
+/* true: port reset signaling asserted */
+#define PORT_RESET	(1 << 4)
+/* Port Link State - bits 5:8
+ * A read gives the current link PM state of the port,
+ * a write with Link State Write Strobe set sets the link state.
+ */
+#define PORT_PLS_MASK	(0xf << 5)
+#define XDEV_U0		(0x0 << 5)
+#define XDEV_U1		(0x1 << 5)
+#define XDEV_U2		(0x2 << 5)
+#define XDEV_U3		(0x3 << 5)
+#define XDEV_DISABLED	(0x4 << 5)
+#define XDEV_RXDETECT	(0x5 << 5)
+#define XDEV_INACTIVE	(0x6 << 5)
+#define XDEV_POLLING	(0x7 << 5)
+#define XDEV_RECOVERY	(0x8 << 5)
+#define XDEV_HOT_RESET	(0x9 << 5)
+#define XDEV_COMP_MODE	(0xa << 5)
+#define XDEV_TEST_MODE	(0xb << 5)
+#define XDEV_RESUME	(0xf << 5)
+
+/* true: port has power (see HCC_PPC) */
+#define PORT_POWER	(1 << 9)
+/* bits 10:13 indicate device speed:
+ * 0 - undefined speed - port hasn't be initialized by a reset yet
+ * 1 - full speed
+ * 2 - low speed
+ * 3 - high speed
+ * 4 - super speed
+ * 5-15 reserved
+ */
+#define DEV_SPEED_MASK		(0xf << 10)
+#define	XDEV_FS			(0x1 << 10)
+#define	XDEV_LS			(0x2 << 10)
+#define	XDEV_HS			(0x3 << 10)
+#define	XDEV_SS			(0x4 << 10)
+#define	XDEV_SSP		(0x5 << 10)
+#define DEV_UNDEFSPEED(p)	(((p) & DEV_SPEED_MASK) == (0x0<<10))
+#define DEV_FULLSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_FS)
+#define DEV_LOWSPEED(p)		(((p) & DEV_SPEED_MASK) == XDEV_LS)
+#define DEV_HIGHSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_HS)
+#define DEV_SUPERSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_SS)
+#define DEV_SUPERSPEEDPLUS(p)	(((p) & DEV_SPEED_MASK) == XDEV_SSP)
+#define DEV_SUPERSPEED_ANY(p)	(((p) & DEV_SPEED_MASK) >= XDEV_SS)
+#define DEV_PORT_SPEED(p)	(((p) >> 10) & 0x0f)
+
+/* Bits 20:23 in the Slot Context are the speed for the device */
+#define	SLOT_SPEED_FS		(XDEV_FS << 10)
+#define	SLOT_SPEED_LS		(XDEV_LS << 10)
+#define	SLOT_SPEED_HS		(XDEV_HS << 10)
+#define	SLOT_SPEED_SS		(XDEV_SS << 10)
+#define	SLOT_SPEED_SSP		(XDEV_SSP << 10)
+/* Port Indicator Control */
+#define PORT_LED_OFF	(0 << 14)
+#define PORT_LED_AMBER	(1 << 14)
+#define PORT_LED_GREEN	(2 << 14)
+#define PORT_LED_MASK	(3 << 14)
+/* Port Link State Write Strobe - set this when changing link state */
+#define PORT_LINK_STROBE	(1 << 16)
+/* true: connect status change */
+#define PORT_CSC	(1 << 17)
+/* true: port enable change */
+#define PORT_PEC	(1 << 18)
+/* true: warm reset for a USB 3.0 device is done.  A "hot" reset puts the port
+ * into an enabled state, and the device into the default state.  A "warm" reset
+ * also resets the link, forcing the device through the link training sequence.
+ * SW can also look at the Port Reset register to see when warm reset is done.
+ */
+#define PORT_WRC	(1 << 19)
+/* true: over-current change */
+#define PORT_OCC	(1 << 20)
+/* true: reset change - 1 to 0 transition of PORT_RESET */
+#define PORT_RC		(1 << 21)
+/* port link status change - set on some port link state transitions:
+ *  Transition				Reason
+ *  ------------------------------------------------------------------------------
+ *  - U3 to Resume			Wakeup signaling from a device
+ *  - Resume to Recovery to U0		USB 3.0 device resume
+ *  - Resume to U0			USB 2.0 device resume
+ *  - U3 to Recovery to U0		Software resume of USB 3.0 device complete
+ *  - U3 to U0				Software resume of USB 2.0 device complete
+ *  - U2 to U0				L1 resume of USB 2.1 device complete
+ *  - U0 to U0 (???)			L1 entry rejection by USB 2.1 device
+ *  - U0 to disabled			L1 entry error with USB 2.1 device
+ *  - Any state to inactive		Error on USB 3.0 port
+ */
+#define PORT_PLC	(1 << 22)
+/* port configure error change - port failed to configure its link partner */
+#define PORT_CEC	(1 << 23)
+#define PORT_CHANGE_MASK	(PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
+				 PORT_RC | PORT_PLC | PORT_CEC)
+
+
+/* Cold Attach Status - xHC can set this bit to report device attached during
+ * Sx state. Warm port reset should be perfomed to clear this bit and move port
+ * to connected state.
+ */
+#define PORT_CAS	(1 << 24)
+/* wake on connect (enable) */
+#define PORT_WKCONN_E	(1 << 25)
+/* wake on disconnect (enable) */
+#define PORT_WKDISC_E	(1 << 26)
+/* wake on over-current (enable) */
+#define PORT_WKOC_E	(1 << 27)
+/* bits 28:29 reserved */
+/* true: device is non-removable - for USB 3.0 roothub emulation */
+#define PORT_DEV_REMOVE	(1 << 30)
+/* Initiate a warm port reset - complete when PORT_WRC is '1' */
+#define PORT_WR		(1 << 31)
+
+/* We mark duplicate entries with -1 */
+#define DUPLICATE_ENTRY ((u8)(-1))
+
+/* Port Power Management Status and Control - port_power_base bitmasks */
+/* Inactivity timer value for transitions into U1, in microseconds.
+ * Timeout can be up to 127us.  0xFF means an infinite timeout.
+ */
+#define PORT_U1_TIMEOUT(p)	((p) & 0xff)
+#define PORT_U1_TIMEOUT_MASK	0xff
+/* Inactivity timer value for transitions into U2 */
+#define PORT_U2_TIMEOUT(p)	(((p) & 0xff) << 8)
+#define PORT_U2_TIMEOUT_MASK	(0xff << 8)
+/* Bits 24:31 for port testing */
+
+/* USB2 Protocol PORTSPMSC */
+#define	PORT_L1S_MASK		7
+#define	PORT_L1S_SUCCESS	1
+#define	PORT_RWE		(1 << 3)
+#define	PORT_HIRD(p)		(((p) & 0xf) << 4)
+#define	PORT_HIRD_MASK		(0xf << 4)
+#define	PORT_L1DS_MASK		(0xff << 8)
+#define	PORT_L1DS(p)		(((p) & 0xff) << 8)
+#define	PORT_HLE		(1 << 16)
+#define PORT_TEST_MODE_SHIFT	28
+
+/* USB3 Protocol PORTLI  Port Link Information */
+#define PORT_RX_LANES(p)	(((p) >> 16) & 0xf)
+#define PORT_TX_LANES(p)	(((p) >> 20) & 0xf)
+
+/* USB2 Protocol PORTHLPMC */
+#define PORT_HIRDM(p)((p) & 3)
+#define PORT_L1_TIMEOUT(p)(((p) & 0xff) << 2)
+#define PORT_BESLD(p)(((p) & 0xf) << 10)
+
+/* use 512 microseconds as USB2 LPM L1 default timeout. */
+#define XHCI_L1_TIMEOUT		512
+
+/* Set default HIRD/BESL value to 4 (350/400us) for USB2 L1 LPM resume latency.
+ * Safe to use with mixed HIRD and BESL systems (host and device) and is used
+ * by other operating systems.
+ *
+ * XHCI 1.0 errata 8/14/12 Table 13 notes:
+ * "Software should choose xHC BESL/BESLD field values that do not violate a
+ * device's resume latency requirements,
+ * e.g. not program values > '4' if BLC = '1' and a HIRD device is attached,
+ * or not program values < '4' if BLC = '0' and a BESL device is attached.
+ */
+#define XHCI_DEFAULT_BESL	4
+
+/*
+ * USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports
+ * to complete link training. usually link trainig completes much faster
+ * so check status 10 times with 36ms sleep in places we need to wait for
+ * polling to complete.
+ */
+#define XHCI_PORT_POLLING_LFPS_TIME  36
+
+/**
+ * struct xhci_intr_reg - Interrupt Register Set
+ * @irq_pending:	IMAN - Interrupt Management Register.  Used to enable
+ *			interrupts and check for pending interrupts.
+ * @irq_control:	IMOD - Interrupt Moderation Register.
+ * 			Used to throttle interrupts.
+ * @erst_size:		Number of segments in the Event Ring Segment Table (ERST).
+ * @erst_base:		ERST base address.
+ * @erst_dequeue:	Event ring dequeue pointer.
+ *
+ * Each interrupter (defined by a MSI-X vector) has an event ring and an Event
+ * Ring Segment Table (ERST) associated with it.  The event ring is comprised of
+ * multiple segments of the same size.  The HC places events on the ring and
+ * "updates the Cycle bit in the TRBs to indicate to software the current
+ * position of the Enqueue Pointer." The HCD (Linux) processes those events and
+ * updates the dequeue pointer.
+ */
+struct xhci_intr_reg {
+	__le32	irq_pending;
+	__le32	irq_control;
+	__le32	erst_size;
+	__le32	rsvd;
+	__le64	erst_base;
+	__le64	erst_dequeue;
+};
+
+/* irq_pending bitmasks */
+#define	ER_IRQ_PENDING(p)	((p) & 0x1)
+/* bits 2:31 need to be preserved */
+/* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
+#define	ER_IRQ_CLEAR(p)		((p) & 0xfffffffe)
+#define	ER_IRQ_ENABLE(p)	((ER_IRQ_CLEAR(p)) | 0x2)
+#define	ER_IRQ_DISABLE(p)	((ER_IRQ_CLEAR(p)) & ~(0x2))
+
+/* irq_control bitmasks */
+/* Minimum interval between interrupts (in 250ns intervals).  The interval
+ * between interrupts will be longer if there are no events on the event ring.
+ * Default is 4000 (1 ms).
+ */
+#define ER_IRQ_INTERVAL_MASK	(0xffff)
+/* Counter used to count down the time to the next interrupt - HW use only */
+#define ER_IRQ_COUNTER_MASK	(0xffff << 16)
+
+/* erst_size bitmasks */
+/* Preserve bits 16:31 of erst_size */
+#define	ERST_SIZE_MASK		(0xffff << 16)
+
+/* erst_dequeue bitmasks */
+/* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
+ * where the current dequeue pointer lies.  This is an optional HW hint.
+ */
+#define ERST_DESI_MASK		(0x7)
+/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
+ * a work queue (or delayed service routine)?
+ */
+#define ERST_EHB		(1 << 3)
+#define ERST_PTR_MASK		(0xf)
+
+/**
+ * struct xhci_run_regs
+ * @microframe_index:
+ * 		MFINDEX - current microframe number
+ *
+ * Section 5.5 Host Controller Runtime Registers:
+ * "Software should read and write these registers using only Dword (32 bit)
+ * or larger accesses"
+ */
+struct xhci_run_regs {
+	__le32			microframe_index;
+	__le32			rsvd[7];
+	struct xhci_intr_reg	ir_set[128];
+};
+
+/**
+ * struct doorbell_array
+ *
+ * Bits  0 -  7: Endpoint target
+ * Bits  8 - 15: RsvdZ
+ * Bits 16 - 31: Stream ID
+ *
+ * Section 5.6
+ */
+struct xhci_doorbell_array {
+	__le32	doorbell[256];
+};
+
+#define DB_VALUE(ep, stream)	((((ep) + 1) & 0xff) | ((stream) << 16))
+#define DB_VALUE_HOST		0x00000000
+
+/**
+ * struct xhci_protocol_caps
+ * @revision:		major revision, minor revision, capability ID,
+ *			and next capability pointer.
+ * @name_string:	Four ASCII characters to say which spec this xHC
+ *			follows, typically "USB ".
+ * @port_info:		Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+	u32	revision;
+	u32	name_string;
+	u32	port_info;
+};
+
+#define	XHCI_EXT_PORT_MAJOR(x)	(((x) >> 24) & 0xff)
+#define	XHCI_EXT_PORT_MINOR(x)	(((x) >> 16) & 0xff)
+#define	XHCI_EXT_PORT_PSIC(x)	(((x) >> 28) & 0x0f)
+#define	XHCI_EXT_PORT_OFF(x)	((x) & 0xff)
+#define	XHCI_EXT_PORT_COUNT(x)	(((x) >> 8) & 0xff)
+
+#define	XHCI_EXT_PORT_PSIV(x)	(((x) >> 0) & 0x0f)
+#define	XHCI_EXT_PORT_PSIE(x)	(((x) >> 4) & 0x03)
+#define	XHCI_EXT_PORT_PLT(x)	(((x) >> 6) & 0x03)
+#define	XHCI_EXT_PORT_PFD(x)	(((x) >> 8) & 0x01)
+#define	XHCI_EXT_PORT_LP(x)	(((x) >> 14) & 0x03)
+#define	XHCI_EXT_PORT_PSIM(x)	(((x) >> 16) & 0xffff)
+
+#define PLT_MASK        (0x03 << 6)
+#define PLT_SYM         (0x00 << 6)
+#define PLT_ASYM_RX     (0x02 << 6)
+#define PLT_ASYM_TX     (0x03 << 6)
+
+/**
+ * struct xhci_container_ctx
+ * @type: Type of context.  Used to calculated offsets to contained contexts.
+ * @size: Size of the context data
+ * @bytes: The raw context data given to HW
+ * @dma: dma address of the bytes
+ *
+ * Represents either a Device or Input context.  Holds a pointer to the raw
+ * memory used for the context (bytes) and dma address of it (dma).
+ */
+struct xhci_container_ctx {
+	unsigned type;
+#define XHCI_CTX_TYPE_DEVICE  0x1
+#define XHCI_CTX_TYPE_INPUT   0x2
+
+	int size;
+
+	u8 *bytes;
+	dma_addr_t dma;
+};
+
+/**
+ * struct xhci_slot_ctx
+ * @dev_info:	Route string, device speed, hub info, and last valid endpoint
+ * @dev_info2:	Max exit latency for device number, root hub port number
+ * @tt_info:	tt_info is used to construct split transaction tokens
+ * @dev_state:	slot state and device address
+ *
+ * Slot Context - section 6.2.1.1.  This assumes the HC uses 32-byte context
+ * structures.  If the HC uses 64-byte contexts, there is an additional 32 bytes
+ * reserved at the end of the slot context for HC internal use.
+ */
+struct xhci_slot_ctx {
+	__le32	dev_info;
+	__le32	dev_info2;
+	__le32	tt_info;
+	__le32	dev_state;
+	/* offset 0x10 to 0x1f reserved for HC internal use */
+	__le32	reserved[4];
+};
+
+/* dev_info bitmasks */
+/* Route String - 0:19 */
+#define ROUTE_STRING_MASK	(0xfffff)
+/* Device speed - values defined by PORTSC Device Speed field - 20:23 */
+#define DEV_SPEED	(0xf << 20)
+#define GET_DEV_SPEED(n) (((n) & DEV_SPEED) >> 20)
+/* bit 24 reserved */
+/* Is this LS/FS device connected through a HS hub? - bit 25 */
+#define DEV_MTT		(0x1 << 25)
+/* Set if the device is a hub - bit 26 */
+#define DEV_HUB		(0x1 << 26)
+/* Index of the last valid endpoint context in this device context - 27:31 */
+#define LAST_CTX_MASK	(0x1f << 27)
+#define LAST_CTX(p)	((p) << 27)
+#define LAST_CTX_TO_EP_NUM(p)	(((p) >> 27) - 1)
+#define SLOT_FLAG	(1 << 0)
+#define EP0_FLAG	(1 << 1)
+
+/* dev_info2 bitmasks */
+/* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
+#define MAX_EXIT	(0xffff)
+/* Root hub port number that is needed to access the USB device */
+#define ROOT_HUB_PORT(p)	(((p) & 0xff) << 16)
+#define DEVINFO_TO_ROOT_HUB_PORT(p)	(((p) >> 16) & 0xff)
+/* Maximum number of ports under a hub device */
+#define XHCI_MAX_PORTS(p)	(((p) & 0xff) << 24)
+#define DEVINFO_TO_MAX_PORTS(p)	(((p) & (0xff << 24)) >> 24)
+
+/* tt_info bitmasks */
+/*
+ * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
+ * The Slot ID of the hub that isolates the high speed signaling from
+ * this low or full-speed device.  '0' if attached to root hub port.
+ */
+#define TT_SLOT		(0xff)
+/*
+ * The number of the downstream facing port of the high-speed hub
+ * '0' if the device is not low or full speed.
+ */
+#define TT_PORT		(0xff << 8)
+#define TT_THINK_TIME(p)	(((p) & 0x3) << 16)
+#define GET_TT_THINK_TIME(p)	(((p) & (0x3 << 16)) >> 16)
+
+/* dev_state bitmasks */
+/* USB device address - assigned by the HC */
+#define DEV_ADDR_MASK	(0xff)
+/* bits 8:26 reserved */
+/* Slot state */
+#define SLOT_STATE	(0x1f << 27)
+#define GET_SLOT_STATE(p)	(((p) & (0x1f << 27)) >> 27)
+
+#define SLOT_STATE_DISABLED	0
+#define SLOT_STATE_ENABLED	SLOT_STATE_DISABLED
+#define SLOT_STATE_DEFAULT	1
+#define SLOT_STATE_ADDRESSED	2
+#define SLOT_STATE_CONFIGURED	3
+
+/**
+ * struct xhci_ep_ctx
+ * @ep_info:	endpoint state, streams, mult, and interval information.
+ * @ep_info2:	information on endpoint type, max packet size, max burst size,
+ * 		error count, and whether the HC will force an event for all
+ * 		transactions.
+ * @deq:	64-bit ring dequeue pointer address.  If the endpoint only
+ * 		defines one stream, this points to the endpoint transfer ring.
+ * 		Otherwise, it points to a stream context array, which has a
+ * 		ring pointer for each flow.
+ * @tx_info:
+ * 		Average TRB lengths for the endpoint ring and
+ * 		max payload within an Endpoint Service Interval Time (ESIT).
+ *
+ * Endpoint Context - section 6.2.1.2.  This assumes the HC uses 32-byte context
+ * structures.  If the HC uses 64-byte contexts, there is an additional 32 bytes
+ * reserved at the end of the endpoint context for HC internal use.
+ */
+struct xhci_ep_ctx {
+	__le32	ep_info;
+	__le32	ep_info2;
+	__le64	deq;
+	__le32	tx_info;
+	/* offset 0x14 - 0x1f reserved for HC internal use */
+	__le32	reserved[3];
+};
+
+/* ep_info bitmasks */
+/*
+ * Endpoint State - bits 0:2
+ * 0 - disabled
+ * 1 - running
+ * 2 - halted due to halt condition - ok to manipulate endpoint ring
+ * 3 - stopped
+ * 4 - TRB error
+ * 5-7 - reserved
+ */
+#define EP_STATE_MASK		(0x7)
+#define EP_STATE_DISABLED	0
+#define EP_STATE_RUNNING	1
+#define EP_STATE_HALTED		2
+#define EP_STATE_STOPPED	3
+#define EP_STATE_ERROR		4
+#define GET_EP_CTX_STATE(ctx)	(le32_to_cpu((ctx)->ep_info) & EP_STATE_MASK)
+
+/* Mult - Max number of burtst within an interval, in EP companion desc. */
+#define EP_MULT(p)		(((p) & 0x3) << 8)
+#define CTX_TO_EP_MULT(p)	(((p) >> 8) & 0x3)
+/* bits 10:14 are Max Primary Streams */
+/* bit 15 is Linear Stream Array */
+/* Interval - period between requests to an endpoint - 125u increments. */
+#define EP_INTERVAL(p)			(((p) & 0xff) << 16)
+#define EP_INTERVAL_TO_UFRAMES(p)	(1 << (((p) >> 16) & 0xff))
+#define CTX_TO_EP_INTERVAL(p)		(((p) >> 16) & 0xff)
+#define EP_MAXPSTREAMS_MASK		(0x1f << 10)
+#define EP_MAXPSTREAMS(p)		(((p) << 10) & EP_MAXPSTREAMS_MASK)
+#define CTX_TO_EP_MAXPSTREAMS(p)	(((p) & EP_MAXPSTREAMS_MASK) >> 10)
+/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
+#define	EP_HAS_LSA		(1 << 15)
+/* hosts with LEC=1 use bits 31:24 as ESIT high bits. */
+#define CTX_TO_MAX_ESIT_PAYLOAD_HI(p)	(((p) >> 24) & 0xff)
+
+/* ep_info2 bitmasks */
+/*
+ * Force Event - generate transfer events for all TRBs for this endpoint
+ * This will tell the HC to ignore the IOC and ISP flags (for debugging only).
+ */
+#define	FORCE_EVENT	(0x1)
+#define ERROR_COUNT(p)	(((p) & 0x3) << 1)
+#define CTX_TO_EP_TYPE(p)	(((p) >> 3) & 0x7)
+#define EP_TYPE(p)	((p) << 3)
+#define ISOC_OUT_EP	1
+#define BULK_OUT_EP	2
+#define INT_OUT_EP	3
+#define CTRL_EP		4
+#define ISOC_IN_EP	5
+#define BULK_IN_EP	6
+#define INT_IN_EP	7
+/* bit 6 reserved */
+/* bit 7 is Host Initiate Disable - for disabling stream selection */
+#define MAX_BURST(p)	(((p)&0xff) << 8)
+#define CTX_TO_MAX_BURST(p)	(((p) >> 8) & 0xff)
+#define MAX_PACKET(p)	(((p)&0xffff) << 16)
+#define MAX_PACKET_MASK		(0xffff << 16)
+#define MAX_PACKET_DECODED(p)	(((p) >> 16) & 0xffff)
+
+/* tx_info bitmasks */
+#define EP_AVG_TRB_LENGTH(p)		((p) & 0xffff)
+#define EP_MAX_ESIT_PAYLOAD_LO(p)	(((p) & 0xffff) << 16)
+#define EP_MAX_ESIT_PAYLOAD_HI(p)	((((p) >> 16) & 0xff) << 24)
+#define CTX_TO_MAX_ESIT_PAYLOAD(p)	(((p) >> 16) & 0xffff)
+
+/* deq bitmasks */
+#define EP_CTX_CYCLE_MASK		(1 << 0)
+#define SCTX_DEQ_MASK			(~0xfL)
+
+
+/**
+ * struct xhci_input_control_context
+ * Input control context; see section 6.2.5.
+ *
+ * @drop_context:	set the bit of the endpoint context you want to disable
+ * @add_context:	set the bit of the endpoint context you want to enable
+ */
+struct xhci_input_control_ctx {
+	__le32	drop_flags;
+	__le32	add_flags;
+	__le32	rsvd2[6];
+};
+
+#define	EP_IS_ADDED(ctrl_ctx, i) \
+	(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))
+#define	EP_IS_DROPPED(ctrl_ctx, i)       \
+	(le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1)))
+
+/* Represents everything that is needed to issue a command on the command ring.
+ * It's useful to pre-allocate these for commands that cannot fail due to
+ * out-of-memory errors, like freeing streams.
+ */
+struct xhci_command {
+	/* Input context for changing device state */
+	struct xhci_container_ctx	*in_ctx;
+	u32				status;
+	int				slot_id;
+	/* If completion is null, no one is waiting on this command
+	 * and the structure can be freed after the command completes.
+	 */
+	struct completion		*completion;
+	union xhci_trb			*command_trb;
+	struct list_head		cmd_list;
+};
+
+/* drop context bitmasks */
+#define	DROP_EP(x)	(0x1 << x)
+/* add context bitmasks */
+#define	ADD_EP(x)	(0x1 << x)
+
+struct xhci_stream_ctx {
+	/* 64-bit stream ring address, cycle state, and stream type */
+	__le64	stream_ring;
+	/* offset 0x14 - 0x1f reserved for HC internal use */
+	__le32	reserved[2];
+};
+
+/* Stream Context Types (section 6.4.1) - bits 3:1 of stream ctx deq ptr */
+#define	SCT_FOR_CTX(p)		(((p) & 0x7) << 1)
+/* Secondary stream array type, dequeue pointer is to a transfer ring */
+#define	SCT_SEC_TR		0
+/* Primary stream array type, dequeue pointer is to a transfer ring */
+#define	SCT_PRI_TR		1
+/* Dequeue pointer is for a secondary stream array (SSA) with 8 entries */
+#define SCT_SSA_8		2
+#define SCT_SSA_16		3
+#define SCT_SSA_32		4
+#define SCT_SSA_64		5
+#define SCT_SSA_128		6
+#define SCT_SSA_256		7
+
+/* Assume no secondary streams for now */
+struct xhci_stream_info {
+	struct xhci_ring		**stream_rings;
+	/* Number of streams, including stream 0 (which drivers can't use) */
+	unsigned int			num_streams;
+	/* The stream context array may be bigger than
+	 * the number of streams the driver asked for
+	 */
+	struct xhci_stream_ctx		*stream_ctx_array;
+	unsigned int			num_stream_ctxs;
+	dma_addr_t			ctx_array_dma;
+	/* For mapping physical TRB addresses to segments in stream rings */
+	struct radix_tree_root		trb_address_map;
+	struct xhci_command		*free_streams_command;
+};
+
+#define	SMALL_STREAM_ARRAY_SIZE		256
+#define	MEDIUM_STREAM_ARRAY_SIZE	1024
+
+/* Some Intel xHCI host controllers need software to keep track of the bus
+ * bandwidth.  Keep track of endpoint info here.  Each root port is allocated
+ * the full bus bandwidth.  We must also treat TTs (including each port under a
+ * multi-TT hub) as a separate bandwidth domain.  The direct memory interface
+ * (DMI) also limits the total bandwidth (across all domains) that can be used.
+ */
+struct xhci_bw_info {
+	/* ep_interval is zero-based */
+	unsigned int		ep_interval;
+	/* mult and num_packets are one-based */
+	unsigned int		mult;
+	unsigned int		num_packets;
+	unsigned int		max_packet_size;
+	unsigned int		max_esit_payload;
+	unsigned int		type;
+};
+
+/* "Block" sizes in bytes the hardware uses for different device speeds.
+ * The logic in this part of the hardware limits the number of bits the hardware
+ * can use, so must represent bandwidth in a less precise manner to mimic what
+ * the scheduler hardware computes.
+ */
+#define	FS_BLOCK	1
+#define	HS_BLOCK	4
+#define	SS_BLOCK	16
+#define	DMI_BLOCK	32
+
+/* Each device speed has a protocol overhead (CRC, bit stuffing, etc) associated
+ * with each byte transferred.  SuperSpeed devices have an initial overhead to
+ * set up bursts.  These are in blocks, see above.  LS overhead has already been
+ * translated into FS blocks.
+ */
+#define DMI_OVERHEAD 8
+#define DMI_OVERHEAD_BURST 4
+#define SS_OVERHEAD 8
+#define SS_OVERHEAD_BURST 32
+#define HS_OVERHEAD 26
+#define FS_OVERHEAD 20
+#define LS_OVERHEAD 128
+/* The TTs need to claim roughly twice as much bandwidth (94 bytes per
+ * microframe ~= 24Mbps) of the HS bus as the devices can actually use because
+ * of overhead associated with split transfers crossing microframe boundaries.
+ * 31 blocks is pure protocol overhead.
+ */
+#define TT_HS_OVERHEAD (31 + 94)
+#define TT_DMI_OVERHEAD (25 + 12)
+
+/* Bandwidth limits in blocks */
+#define FS_BW_LIMIT		1285
+#define TT_BW_LIMIT		1320
+#define HS_BW_LIMIT		1607
+#define SS_BW_LIMIT_IN		3906
+#define DMI_BW_LIMIT_IN		3906
+#define SS_BW_LIMIT_OUT		3906
+#define DMI_BW_LIMIT_OUT	3906
+
+/* Percentage of bus bandwidth reserved for non-periodic transfers */
+#define FS_BW_RESERVED		10
+#define HS_BW_RESERVED		20
+#define SS_BW_RESERVED		10
+
+struct xhci_virt_ep {
+	struct xhci_virt_device		*vdev;	/* parent */
+	unsigned int			ep_index;
+	struct xhci_ring		*ring;
+	/* Related to endpoints that are configured to use stream IDs only */
+	struct xhci_stream_info		*stream_info;
+	/* Temporary storage in case the configure endpoint command fails and we
+	 * have to restore the device state to the previous state
+	 */
+	struct xhci_ring		*new_ring;
+	unsigned int			err_count;
+	unsigned int			ep_state;
+#define SET_DEQ_PENDING		(1 << 0)
+#define EP_HALTED		(1 << 1)	/* For stall handling */
+#define EP_STOP_CMD_PENDING	(1 << 2)	/* For URB cancellation */
+/* Transitioning the endpoint to using streams, don't enqueue URBs */
+#define EP_GETTING_STREAMS	(1 << 3)
+#define EP_HAS_STREAMS		(1 << 4)
+/* Transitioning the endpoint to not using streams, don't enqueue URBs */
+#define EP_GETTING_NO_STREAMS	(1 << 5)
+#define EP_HARD_CLEAR_TOGGLE	(1 << 6)
+#define EP_SOFT_CLEAR_TOGGLE	(1 << 7)
+/* usb_hub_clear_tt_buffer is in progress */
+#define EP_CLEARING_TT		(1 << 8)
+	/* ----  Related to URB cancellation ---- */
+	struct list_head	cancelled_td_list;
+	struct xhci_hcd		*xhci;
+	/* Dequeue pointer and dequeue segment for a submitted Set TR Dequeue
+	 * command.  We'll need to update the ring's dequeue segment and dequeue
+	 * pointer after the command completes.
+	 */
+	struct xhci_segment	*queued_deq_seg;
+	union xhci_trb		*queued_deq_ptr;
+	/*
+	 * Sometimes the xHC can not process isochronous endpoint ring quickly
+	 * enough, and it will miss some isoc tds on the ring and generate
+	 * a Missed Service Error Event.
+	 * Set skip flag when receive a Missed Service Error Event and
+	 * process the missed tds on the endpoint ring.
+	 */
+	bool			skip;
+	/* Bandwidth checking storage */
+	struct xhci_bw_info	bw_info;
+	struct list_head	bw_endpoint_list;
+	/* Isoch Frame ID checking storage */
+	int			next_frame_id;
+	/* Use new Isoch TRB layout needed for extended TBC support */
+	bool			use_extended_tbc;
+};
+
+enum xhci_overhead_type {
+	LS_OVERHEAD_TYPE = 0,
+	FS_OVERHEAD_TYPE,
+	HS_OVERHEAD_TYPE,
+};
+
+struct xhci_interval_bw {
+	unsigned int		num_packets;
+	/* Sorted by max packet size.
+	 * Head of the list is the greatest max packet size.
+	 */
+	struct list_head	endpoints;
+	/* How many endpoints of each speed are present. */
+	unsigned int		overhead[3];
+};
+
+#define	XHCI_MAX_INTERVAL	16
+
+struct xhci_interval_bw_table {
+	unsigned int		interval0_esit_payload;
+	struct xhci_interval_bw	interval_bw[XHCI_MAX_INTERVAL];
+	/* Includes reserved bandwidth for async endpoints */
+	unsigned int		bw_used;
+	unsigned int		ss_bw_in;
+	unsigned int		ss_bw_out;
+};
+
+#define EP_CTX_PER_DEV		31
+
+struct xhci_virt_device {
+	int				slot_id;
+	struct usb_device		*udev;
+	/*
+	 * Commands to the hardware are passed an "input context" that
+	 * tells the hardware what to change in its data structures.
+	 * The hardware will return changes in an "output context" that
+	 * software must allocate for the hardware.  We need to keep
+	 * track of input and output contexts separately because
+	 * these commands might fail and we don't trust the hardware.
+	 */
+	struct xhci_container_ctx       *out_ctx;
+	/* Used for addressing devices and configuration changes */
+	struct xhci_container_ctx       *in_ctx;
+	struct xhci_virt_ep		eps[EP_CTX_PER_DEV];
+	u8				fake_port;
+	u8				real_port;
+	struct xhci_interval_bw_table	*bw_table;
+	struct xhci_tt_bw_info		*tt_info;
+	/*
+	 * flags for state tracking based on events and issued commands.
+	 * Software can not rely on states from output contexts because of
+	 * latency between events and xHC updating output context values.
+	 * See xhci 1.1 section 4.8.3 for more details
+	 */
+	unsigned long			flags;
+#define VDEV_PORT_ERROR			BIT(0) /* Port error, link inactive */
+
+	/* The current max exit latency for the enabled USB3 link states. */
+	u16				current_mel;
+	/* Used for the debugfs interfaces. */
+	void				*debugfs_private;
+};
+
+/*
+ * For each roothub, keep track of the bandwidth information for each periodic
+ * interval.
+ *
+ * If a high speed hub is attached to the roothub, each TT associated with that
+ * hub is a separate bandwidth domain.  The interval information for the
+ * endpoints on the devices under that TT will appear in the TT structure.
+ */
+struct xhci_root_port_bw_info {
+	struct list_head		tts;
+	unsigned int			num_active_tts;
+	struct xhci_interval_bw_table	bw_table;
+};
+
+struct xhci_tt_bw_info {
+	struct list_head		tt_list;
+	int				slot_id;
+	int				ttport;
+	struct xhci_interval_bw_table	bw_table;
+	int				active_eps;
+};
+
+
+/**
+ * struct xhci_device_context_array
+ * @dev_context_ptr	array of 64-bit DMA addresses for device contexts
+ */
+struct xhci_device_context_array {
+	/* 64-bit device addresses; we only write 32-bit addresses */
+	__le64			dev_context_ptrs[MAX_HC_SLOTS];
+	/* private xHCD pointers */
+	dma_addr_t	dma;
+};
+/* TODO: write function to set the 64-bit device DMA address */
+/*
+ * TODO: change this to be dynamically sized at HC mem init time since the HC
+ * might not be able to handle the maximum number of devices possible.
+ */
+
+
+struct xhci_transfer_event {
+	/* 64-bit buffer address, or immediate data */
+	__le64	buffer;
+	__le32	transfer_len;
+	/* This field is interpreted differently based on the type of TRB */
+	__le32	flags;
+};
+
+/* Transfer event TRB length bit mask */
+/* bits 0:23 */
+#define	EVENT_TRB_LEN(p)		((p) & 0xffffff)
+
+/** Transfer Event bit fields **/
+#define	TRB_TO_EP_ID(p)	(((p) >> 16) & 0x1f)
+
+/* Completion Code - only applicable for some types of TRBs */
+#define	COMP_CODE_MASK		(0xff << 24)
+#define GET_COMP_CODE(p)	(((p) & COMP_CODE_MASK) >> 24)
+#define COMP_INVALID				0
+#define COMP_SUCCESS				1
+#define COMP_DATA_BUFFER_ERROR			2
+#define COMP_BABBLE_DETECTED_ERROR		3
+#define COMP_USB_TRANSACTION_ERROR		4
+#define COMP_TRB_ERROR				5
+#define COMP_STALL_ERROR			6
+#define COMP_RESOURCE_ERROR			7
+#define COMP_BANDWIDTH_ERROR			8
+#define COMP_NO_SLOTS_AVAILABLE_ERROR		9
+#define COMP_INVALID_STREAM_TYPE_ERROR		10
+#define COMP_SLOT_NOT_ENABLED_ERROR		11
+#define COMP_ENDPOINT_NOT_ENABLED_ERROR		12
+#define COMP_SHORT_PACKET			13
+#define COMP_RING_UNDERRUN			14
+#define COMP_RING_OVERRUN			15
+#define COMP_VF_EVENT_RING_FULL_ERROR		16
+#define COMP_PARAMETER_ERROR			17
+#define COMP_BANDWIDTH_OVERRUN_ERROR		18
+#define COMP_CONTEXT_STATE_ERROR		19
+#define COMP_NO_PING_RESPONSE_ERROR		20
+#define COMP_EVENT_RING_FULL_ERROR		21
+#define COMP_INCOMPATIBLE_DEVICE_ERROR		22
+#define COMP_MISSED_SERVICE_ERROR		23
+#define COMP_COMMAND_RING_STOPPED		24
+#define COMP_COMMAND_ABORTED			25
+#define COMP_STOPPED				26
+#define COMP_STOPPED_LENGTH_INVALID		27
+#define COMP_STOPPED_SHORT_PACKET		28
+#define COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR	29
+#define COMP_ISOCH_BUFFER_OVERRUN		31
+#define COMP_EVENT_LOST_ERROR			32
+#define COMP_UNDEFINED_ERROR			33
+#define COMP_INVALID_STREAM_ID_ERROR		34
+#define COMP_SECONDARY_BANDWIDTH_ERROR		35
+#define COMP_SPLIT_TRANSACTION_ERROR		36
+
+static inline const char *xhci_trb_comp_code_string(u8 status)
+{
+	switch (status) {
+	case COMP_INVALID:
+		return "Invalid";
+	case COMP_SUCCESS:
+		return "Success";
+	case COMP_DATA_BUFFER_ERROR:
+		return "Data Buffer Error";
+	case COMP_BABBLE_DETECTED_ERROR:
+		return "Babble Detected";
+	case COMP_USB_TRANSACTION_ERROR:
+		return "USB Transaction Error";
+	case COMP_TRB_ERROR:
+		return "TRB Error";
+	case COMP_STALL_ERROR:
+		return "Stall Error";
+	case COMP_RESOURCE_ERROR:
+		return "Resource Error";
+	case COMP_BANDWIDTH_ERROR:
+		return "Bandwidth Error";
+	case COMP_NO_SLOTS_AVAILABLE_ERROR:
+		return "No Slots Available Error";
+	case COMP_INVALID_STREAM_TYPE_ERROR:
+		return "Invalid Stream Type Error";
+	case COMP_SLOT_NOT_ENABLED_ERROR:
+		return "Slot Not Enabled Error";
+	case COMP_ENDPOINT_NOT_ENABLED_ERROR:
+		return "Endpoint Not Enabled Error";
+	case COMP_SHORT_PACKET:
+		return "Short Packet";
+	case COMP_RING_UNDERRUN:
+		return "Ring Underrun";
+	case COMP_RING_OVERRUN:
+		return "Ring Overrun";
+	case COMP_VF_EVENT_RING_FULL_ERROR:
+		return "VF Event Ring Full Error";
+	case COMP_PARAMETER_ERROR:
+		return "Parameter Error";
+	case COMP_BANDWIDTH_OVERRUN_ERROR:
+		return "Bandwidth Overrun Error";
+	case COMP_CONTEXT_STATE_ERROR:
+		return "Context State Error";
+	case COMP_NO_PING_RESPONSE_ERROR:
+		return "No Ping Response Error";
+	case COMP_EVENT_RING_FULL_ERROR:
+		return "Event Ring Full Error";
+	case COMP_INCOMPATIBLE_DEVICE_ERROR:
+		return "Incompatible Device Error";
+	case COMP_MISSED_SERVICE_ERROR:
+		return "Missed Service Error";
+	case COMP_COMMAND_RING_STOPPED:
+		return "Command Ring Stopped";
+	case COMP_COMMAND_ABORTED:
+		return "Command Aborted";
+	case COMP_STOPPED:
+		return "Stopped";
+	case COMP_STOPPED_LENGTH_INVALID:
+		return "Stopped - Length Invalid";
+	case COMP_STOPPED_SHORT_PACKET:
+		return "Stopped - Short Packet";
+	case COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR:
+		return "Max Exit Latency Too Large Error";
+	case COMP_ISOCH_BUFFER_OVERRUN:
+		return "Isoch Buffer Overrun";
+	case COMP_EVENT_LOST_ERROR:
+		return "Event Lost Error";
+	case COMP_UNDEFINED_ERROR:
+		return "Undefined Error";
+	case COMP_INVALID_STREAM_ID_ERROR:
+		return "Invalid Stream ID Error";
+	case COMP_SECONDARY_BANDWIDTH_ERROR:
+		return "Secondary Bandwidth Error";
+	case COMP_SPLIT_TRANSACTION_ERROR:
+		return "Split Transaction Error";
+	default:
+		return "Unknown!!";
+	}
+}
+
+struct xhci_link_trb {
+	/* 64-bit segment pointer*/
+	__le64 segment_ptr;
+	__le32 intr_target;
+	__le32 control;
+};
+
+/* control bitfields */
+#define LINK_TOGGLE	(0x1<<1)
+
+/* Command completion event TRB */
+struct xhci_event_cmd {
+	/* Pointer to command TRB, or the value passed by the event data trb */
+	__le64 cmd_trb;
+	__le32 status;
+	__le32 flags;
+};
+
+/* flags bitmasks */
+
+/* Address device - disable SetAddress */
+#define TRB_BSR		(1<<9)
+
+/* Configure Endpoint - Deconfigure */
+#define TRB_DC		(1<<9)
+
+/* Stop Ring - Transfer State Preserve */
+#define TRB_TSP		(1<<9)
+
+enum xhci_ep_reset_type {
+	EP_HARD_RESET,
+	EP_SOFT_RESET,
+};
+
+/* Force Event */
+#define TRB_TO_VF_INTR_TARGET(p)	(((p) & (0x3ff << 22)) >> 22)
+#define TRB_TO_VF_ID(p)			(((p) & (0xff << 16)) >> 16)
+
+/* Set Latency Tolerance Value */
+#define TRB_TO_BELT(p)			(((p) & (0xfff << 16)) >> 16)
+
+/* Get Port Bandwidth */
+#define TRB_TO_DEV_SPEED(p)		(((p) & (0xf << 16)) >> 16)
+
+/* Force Header */
+#define TRB_TO_PACKET_TYPE(p)		((p) & 0x1f)
+#define TRB_TO_ROOTHUB_PORT(p)		(((p) & (0xff << 24)) >> 24)
+
+enum xhci_setup_dev {
+	SETUP_CONTEXT_ONLY,
+	SETUP_CONTEXT_ADDRESS,
+};
+
+/* bits 16:23 are the virtual function ID */
+/* bits 24:31 are the slot ID */
+#define TRB_TO_SLOT_ID(p)	(((p) & (0xff<<24)) >> 24)
+#define SLOT_ID_FOR_TRB(p)	(((p) & 0xff) << 24)
+
+/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
+#define TRB_TO_EP_INDEX(p)		((((p) & (0x1f << 16)) >> 16) - 1)
+#define	EP_ID_FOR_TRB(p)		((((p) + 1) & 0x1f) << 16)
+
+#define SUSPEND_PORT_FOR_TRB(p)		(((p) & 1) << 23)
+#define TRB_TO_SUSPEND_PORT(p)		(((p) & (1 << 23)) >> 23)
+#define LAST_EP_INDEX			30
+
+/* Set TR Dequeue Pointer command TRB fields, 6.4.3.9 */
+#define TRB_TO_STREAM_ID(p)		((((p) & (0xffff << 16)) >> 16))
+#define STREAM_ID_FOR_TRB(p)		((((p)) & 0xffff) << 16)
+#define SCT_FOR_TRB(p)			(((p) << 1) & 0x7)
+
+/* Link TRB specific fields */
+#define TRB_TC			(1<<1)
+
+/* Port Status Change Event TRB fields */
+/* Port ID - bits 31:24 */
+#define GET_PORT_ID(p)		(((p) & (0xff << 24)) >> 24)
+
+#define EVENT_DATA		(1 << 2)
+
+/* Normal TRB fields */
+/* transfer_len bitmasks - bits 0:16 */
+#define	TRB_LEN(p)		((p) & 0x1ffff)
+/* TD Size, packets remaining in this TD, bits 21:17 (5 bits, so max 31) */
+#define TRB_TD_SIZE(p)          (min((p), (u32)31) << 17)
+#define GET_TD_SIZE(p)		(((p) & 0x3e0000) >> 17)
+/* xhci 1.1 uses the TD_SIZE field for TBC if Extended TBC is enabled (ETE) */
+#define TRB_TD_SIZE_TBC(p)      (min((p), (u32)31) << 17)
+/* Interrupter Target - which MSI-X vector to target the completion event at */
+#define TRB_INTR_TARGET(p)	(((p) & 0x3ff) << 22)
+#define GET_INTR_TARGET(p)	(((p) >> 22) & 0x3ff)
+/* Total burst count field, Rsvdz on xhci 1.1 with Extended TBC enabled (ETE) */
+#define TRB_TBC(p)		(((p) & 0x3) << 7)
+#define TRB_TLBPC(p)		(((p) & 0xf) << 16)
+
+/* Cycle bit - indicates TRB ownership by HC or HCD */
+#define TRB_CYCLE		(1<<0)
+/*
+ * Force next event data TRB to be evaluated before task switch.
+ * Used to pass OS data back after a TD completes.
+ */
+#define TRB_ENT			(1<<1)
+/* Interrupt on short packet */
+#define TRB_ISP			(1<<2)
+/* Set PCIe no snoop attribute */
+#define TRB_NO_SNOOP		(1<<3)
+/* Chain multiple TRBs into a TD */
+#define TRB_CHAIN		(1<<4)
+/* Interrupt on completion */
+#define TRB_IOC			(1<<5)
+/* The buffer pointer contains immediate data */
+#define TRB_IDT			(1<<6)
+/* TDs smaller than this might use IDT */
+#define TRB_IDT_MAX_SIZE	8
+
+/* Block Event Interrupt */
+#define	TRB_BEI			(1<<9)
+
+/* Control transfer TRB specific fields */
+#define TRB_DIR_IN		(1<<16)
+#define	TRB_TX_TYPE(p)		((p) << 16)
+#define	TRB_DATA_OUT		2
+#define	TRB_DATA_IN		3
+
+/* Isochronous TRB specific fields */
+#define TRB_SIA			(1<<31)
+#define TRB_FRAME_ID(p)		(((p) & 0x7ff) << 20)
+
+/* TRB cache size for xHC with TRB cache */
+#define TRB_CACHE_SIZE_HS	8
+#define TRB_CACHE_SIZE_SS	16
+
+struct xhci_generic_trb {
+	__le32 field[4];
+};
+
+union xhci_trb {
+	struct xhci_link_trb		link;
+	struct xhci_transfer_event	trans_event;
+	struct xhci_event_cmd		event_cmd;
+	struct xhci_generic_trb		generic;
+};
+
+/* TRB bit mask */
+#define	TRB_TYPE_BITMASK	(0xfc00)
+#define TRB_TYPE(p)		((p) << 10)
+#define TRB_FIELD_TO_TYPE(p)	(((p) & TRB_TYPE_BITMASK) >> 10)
+/* TRB type IDs */
+/* bulk, interrupt, isoc scatter/gather, and control data stage */
+#define TRB_NORMAL		1
+/* setup stage for control transfers */
+#define TRB_SETUP		2
+/* data stage for control transfers */
+#define TRB_DATA		3
+/* status stage for control transfers */
+#define TRB_STATUS		4
+/* isoc transfers */
+#define TRB_ISOC		5
+/* TRB for linking ring segments */
+#define TRB_LINK		6
+#define TRB_EVENT_DATA		7
+/* Transfer Ring No-op (not for the command ring) */
+#define TRB_TR_NOOP		8
+/* Command TRBs */
+/* Enable Slot Command */
+#define TRB_ENABLE_SLOT		9
+/* Disable Slot Command */
+#define TRB_DISABLE_SLOT	10
+/* Address Device Command */
+#define TRB_ADDR_DEV		11
+/* Configure Endpoint Command */
+#define TRB_CONFIG_EP		12
+/* Evaluate Context Command */
+#define TRB_EVAL_CONTEXT	13
+/* Reset Endpoint Command */
+#define TRB_RESET_EP		14
+/* Stop Transfer Ring Command */
+#define TRB_STOP_RING		15
+/* Set Transfer Ring Dequeue Pointer Command */
+#define TRB_SET_DEQ		16
+/* Reset Device Command */
+#define TRB_RESET_DEV		17
+/* Force Event Command (opt) */
+#define TRB_FORCE_EVENT		18
+/* Negotiate Bandwidth Command (opt) */
+#define TRB_NEG_BANDWIDTH	19
+/* Set Latency Tolerance Value Command (opt) */
+#define TRB_SET_LT		20
+/* Get port bandwidth Command */
+#define TRB_GET_BW		21
+/* Force Header Command - generate a transaction or link management packet */
+#define TRB_FORCE_HEADER	22
+/* No-op Command - not for transfer rings */
+#define TRB_CMD_NOOP		23
+/* TRB IDs 24-31 reserved */
+/* Event TRBS */
+/* Transfer Event */
+#define TRB_TRANSFER		32
+/* Command Completion Event */
+#define TRB_COMPLETION		33
+/* Port Status Change Event */
+#define TRB_PORT_STATUS		34
+/* Bandwidth Request Event (opt) */
+#define TRB_BANDWIDTH_EVENT	35
+/* Doorbell Event (opt) */
+#define TRB_DOORBELL		36
+/* Host Controller Event */
+#define TRB_HC_EVENT		37
+/* Device Notification Event - device sent function wake notification */
+#define TRB_DEV_NOTE		38
+/* MFINDEX Wrap Event - microframe counter wrapped */
+#define TRB_MFINDEX_WRAP	39
+/* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
+#define TRB_VENDOR_DEFINED_LOW	48
+/* Nec vendor-specific command completion event. */
+#define	TRB_NEC_CMD_COMP	48
+/* Get NEC firmware revision. */
+#define	TRB_NEC_GET_FW		49
+
+static inline const char *xhci_trb_type_string(u8 type)
+{
+	switch (type) {
+	case TRB_NORMAL:
+		return "Normal";
+	case TRB_SETUP:
+		return "Setup Stage";
+	case TRB_DATA:
+		return "Data Stage";
+	case TRB_STATUS:
+		return "Status Stage";
+	case TRB_ISOC:
+		return "Isoch";
+	case TRB_LINK:
+		return "Link";
+	case TRB_EVENT_DATA:
+		return "Event Data";
+	case TRB_TR_NOOP:
+		return "No-Op";
+	case TRB_ENABLE_SLOT:
+		return "Enable Slot Command";
+	case TRB_DISABLE_SLOT:
+		return "Disable Slot Command";
+	case TRB_ADDR_DEV:
+		return "Address Device Command";
+	case TRB_CONFIG_EP:
+		return "Configure Endpoint Command";
+	case TRB_EVAL_CONTEXT:
+		return "Evaluate Context Command";
+	case TRB_RESET_EP:
+		return "Reset Endpoint Command";
+	case TRB_STOP_RING:
+		return "Stop Ring Command";
+	case TRB_SET_DEQ:
+		return "Set TR Dequeue Pointer Command";
+	case TRB_RESET_DEV:
+		return "Reset Device Command";
+	case TRB_FORCE_EVENT:
+		return "Force Event Command";
+	case TRB_NEG_BANDWIDTH:
+		return "Negotiate Bandwidth Command";
+	case TRB_SET_LT:
+		return "Set Latency Tolerance Value Command";
+	case TRB_GET_BW:
+		return "Get Port Bandwidth Command";
+	case TRB_FORCE_HEADER:
+		return "Force Header Command";
+	case TRB_CMD_NOOP:
+		return "No-Op Command";
+	case TRB_TRANSFER:
+		return "Transfer Event";
+	case TRB_COMPLETION:
+		return "Command Completion Event";
+	case TRB_PORT_STATUS:
+		return "Port Status Change Event";
+	case TRB_BANDWIDTH_EVENT:
+		return "Bandwidth Request Event";
+	case TRB_DOORBELL:
+		return "Doorbell Event";
+	case TRB_HC_EVENT:
+		return "Host Controller Event";
+	case TRB_DEV_NOTE:
+		return "Device Notification Event";
+	case TRB_MFINDEX_WRAP:
+		return "MFINDEX Wrap Event";
+	case TRB_NEC_CMD_COMP:
+		return "NEC Command Completion Event";
+	case TRB_NEC_GET_FW:
+		return "NET Get Firmware Revision Command";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+#define TRB_TYPE_LINK(x)	(((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
+/* Above, but for __le32 types -- can avoid work by swapping constants: */
+#define TRB_TYPE_LINK_LE32(x)	(((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
+				 cpu_to_le32(TRB_TYPE(TRB_LINK)))
+#define TRB_TYPE_NOOP_LE32(x)	(((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
+				 cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
+
+#define NEC_FW_MINOR(p)		(((p) >> 0) & 0xff)
+#define NEC_FW_MAJOR(p)		(((p) >> 8) & 0xff)
+
+/*
+ * TRBS_PER_SEGMENT must be a multiple of 4,
+ * since the command ring is 64-byte aligned.
+ * It must also be greater than 16.
+ */
+#define TRBS_PER_SEGMENT	256
+/* Allow two commands + a link TRB, along with any reserved command TRBs */
+#define MAX_RSVD_CMD_TRBS	(TRBS_PER_SEGMENT - 3)
+#define TRB_SEGMENT_SIZE	(TRBS_PER_SEGMENT*16)
+#define TRB_SEGMENT_SHIFT	(ilog2(TRB_SEGMENT_SIZE))
+/* TRB buffer pointers can't cross 64KB boundaries */
+#define TRB_MAX_BUFF_SHIFT		16
+#define TRB_MAX_BUFF_SIZE	(1 << TRB_MAX_BUFF_SHIFT)
+/* How much data is left before the 64KB boundary? */
+#define TRB_BUFF_LEN_UP_TO_BOUNDARY(addr)	(TRB_MAX_BUFF_SIZE - \
+					(addr & (TRB_MAX_BUFF_SIZE - 1)))
+#define MAX_SOFT_RETRY		3
+/*
+ * Limits of consecutive isoc trbs that can Block Event Interrupt (BEI) if
+ * XHCI_AVOID_BEI quirk is in use.
+ */
+#define AVOID_BEI_INTERVAL_MIN	8
+#define AVOID_BEI_INTERVAL_MAX	32
+
+struct xhci_segment {
+	union xhci_trb		*trbs;
+	/* private to HCD */
+	struct xhci_segment	*next;
+	dma_addr_t		dma;
+	/* Max packet sized bounce buffer for td-fragmant alignment */
+	dma_addr_t		bounce_dma;
+	void			*bounce_buf;
+	unsigned int		bounce_offs;
+	unsigned int		bounce_len;
+};
+
+enum xhci_cancelled_td_status {
+	TD_DIRTY = 0,
+	TD_HALTED,
+	TD_CLEARING_CACHE,
+	TD_CLEARED,
+};
+
+struct xhci_td {
+	struct list_head	td_list;
+	struct list_head	cancelled_td_list;
+	int			status;
+	enum xhci_cancelled_td_status	cancel_status;
+	struct urb		*urb;
+	struct xhci_segment	*start_seg;
+	union xhci_trb		*first_trb;
+	union xhci_trb		*last_trb;
+	struct xhci_segment	*last_trb_seg;
+	struct xhci_segment	*bounce_seg;
+	/* actual_length of the URB has already been set */
+	bool			urb_length_set;
+	unsigned int		num_trbs;
+};
+
+/* xHCI command default timeout value */
+#define XHCI_CMD_DEFAULT_TIMEOUT	(5 * HZ)
+
+/* command descriptor */
+struct xhci_cd {
+	struct xhci_command	*command;
+	union xhci_trb		*cmd_trb;
+};
+
+enum xhci_ring_type {
+	TYPE_CTRL = 0,
+	TYPE_ISOC,
+	TYPE_BULK,
+	TYPE_INTR,
+	TYPE_STREAM,
+	TYPE_COMMAND,
+	TYPE_EVENT,
+};
+
+static inline const char *xhci_ring_type_string(enum xhci_ring_type type)
+{
+	switch (type) {
+	case TYPE_CTRL:
+		return "CTRL";
+	case TYPE_ISOC:
+		return "ISOC";
+	case TYPE_BULK:
+		return "BULK";
+	case TYPE_INTR:
+		return "INTR";
+	case TYPE_STREAM:
+		return "STREAM";
+	case TYPE_COMMAND:
+		return "CMD";
+	case TYPE_EVENT:
+		return "EVENT";
+	}
+
+	return "UNKNOWN";
+}
+
+struct xhci_ring {
+	struct xhci_segment	*first_seg;
+	struct xhci_segment	*last_seg;
+	union  xhci_trb		*enqueue;
+	struct xhci_segment	*enq_seg;
+	union  xhci_trb		*dequeue;
+	struct xhci_segment	*deq_seg;
+	struct list_head	td_list;
+	/*
+	 * Write the cycle state into the TRB cycle field to give ownership of
+	 * the TRB to the host controller (if we are the producer), or to check
+	 * if we own the TRB (if we are the consumer).  See section 4.9.1.
+	 */
+	u32			cycle_state;
+	unsigned int		stream_id;
+	unsigned int		num_segs;
+	unsigned int		num_trbs_free;
+	unsigned int		num_trbs_free_temp;
+	unsigned int		bounce_buf_len;
+	enum xhci_ring_type	type;
+	bool			last_td_was_short;
+	struct radix_tree_root	*trb_address_map;
+};
+
+struct xhci_erst_entry {
+	/* 64-bit event ring segment address */
+	__le64	seg_addr;
+	__le32	seg_size;
+	/* Set to zero */
+	__le32	rsvd;
+};
+
+struct xhci_erst {
+	struct xhci_erst_entry	*entries;
+	unsigned int		num_entries;
+	/* xhci->event_ring keeps track of segment dma addresses */
+	dma_addr_t		erst_dma_addr;
+	/* Num entries the ERST can contain */
+	unsigned int		erst_size;
+};
+
+struct xhci_scratchpad {
+	u64 *sp_array;
+	dma_addr_t sp_dma;
+	void **sp_buffers;
+};
+
+struct urb_priv {
+	int	num_tds;
+	int	num_tds_done;
+	struct	xhci_td	td[];
+};
+
+/*
+ * Each segment table entry is 4*32bits long.  1K seems like an ok size:
+ * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
+ * meaning 64 ring segments.
+ * Initial allocated size of the ERST, in number of entries */
+#define	ERST_NUM_SEGS	1
+/* Poll every 60 seconds */
+#define	POLL_TIMEOUT	60
+/* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */
+#define XHCI_STOP_EP_CMD_TIMEOUT	5
+/* XXX: Make these module parameters */
+
+struct s3_save {
+	u32	command;
+	u32	dev_nt;
+	u64	dcbaa_ptr;
+	u32	config_reg;
+	u32	irq_pending;
+	u32	irq_control;
+	u32	erst_size;
+	u64	erst_base;
+	u64	erst_dequeue;
+};
+
+/* Use for lpm */
+struct dev_info {
+	u32			dev_id;
+	struct	list_head	list;
+};
+
+struct xhci_bus_state {
+	unsigned long		bus_suspended;
+	unsigned long		next_statechange;
+
+	/* Port suspend arrays are indexed by the portnum of the fake roothub */
+	/* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */
+	u32			port_c_suspend;
+	u32			suspended_ports;
+	u32			port_remote_wakeup;
+	unsigned long		resume_done[USB_MAXCHILDREN];
+	/* which ports have started to resume */
+	unsigned long		resuming_ports;
+	/* Which ports are waiting on RExit to U0 transition. */
+	unsigned long		rexit_ports;
+	struct completion	rexit_done[USB_MAXCHILDREN];
+	struct completion	u3exit_done[USB_MAXCHILDREN];
+};
+
+
+/*
+ * It can take up to 20 ms to transition from RExit to U0 on the
+ * Intel Lynx Point LP xHCI host.
+ */
+#define	XHCI_MAX_REXIT_TIMEOUT_MS	20
+struct xhci_port_cap {
+	u32			*psi;	/* array of protocol speed ID entries */
+	u8			psi_count;
+	u8			psi_uid_count;
+	u8			maj_rev;
+	u8			min_rev;
+};
+
+struct xhci_port {
+	__le32 __iomem		*addr;
+	int			hw_portnum;
+	int			hcd_portnum;
+	struct xhci_hub		*rhub;
+	struct xhci_port_cap	*port_cap;
+	unsigned int		lpm_incapable:1;
+};
+
+struct xhci_hub {
+	struct xhci_port	**ports;
+	unsigned int		num_ports;
+	struct usb_hcd		*hcd;
+	/* keep track of bus suspend info */
+	struct xhci_bus_state   bus_state;
+	/* supported prococol extended capabiliy values */
+	u8			maj_rev;
+	u8			min_rev;
+};
+
+/* There is one xhci_hcd structure per controller */
+struct xhci_hcd {
+	struct usb_hcd *main_hcd;
+	struct usb_hcd *shared_hcd;
+	/* glue to PCI and HCD framework */
+	struct xhci_cap_regs __iomem *cap_regs;
+	struct xhci_op_regs __iomem *op_regs;
+	struct xhci_run_regs __iomem *run_regs;
+	struct xhci_doorbell_array __iomem *dba;
+	/* Our HCD's current interrupter register set */
+	struct	xhci_intr_reg __iomem *ir_set;
+
+	/* Cached register copies of read-only HC data */
+	__u32		hcs_params1;
+	__u32		hcs_params2;
+	__u32		hcs_params3;
+	__u32		hcc_params;
+	__u32		hcc_params2;
+
+	spinlock_t	lock;
+
+	/* packed release number */
+	u8		sbrn;
+	u16		hci_version;
+	u8		max_slots;
+	u8		max_interrupters;
+	u8		max_ports;
+	u8		isoc_threshold;
+	/* imod_interval in ns (I * 250ns) */
+	u32		imod_interval;
+	u32		isoc_bei_interval;
+	int		event_ring_max;
+	/* 4KB min, 128MB max */
+	int		page_size;
+	/* Valid values are 12 to 20, inclusive */
+	int		page_shift;
+	/* msi-x vectors */
+	int		msix_count;
+	/* optional clocks */
+	struct clk		*clk;
+	struct clk		*reg_clk;
+	/* optional reset controller */
+	struct reset_control *reset;
+	/* data structures */
+	struct xhci_device_context_array *dcbaa;
+	struct xhci_ring	*cmd_ring;
+	unsigned int            cmd_ring_state;
+#define CMD_RING_STATE_RUNNING         (1 << 0)
+#define CMD_RING_STATE_ABORTED         (1 << 1)
+#define CMD_RING_STATE_STOPPED         (1 << 2)
+	struct list_head        cmd_list;
+	unsigned int		cmd_ring_reserved_trbs;
+	struct delayed_work	cmd_timer;
+	struct completion	cmd_ring_stop_completion;
+	struct xhci_command	*current_cmd;
+	struct xhci_ring	*event_ring;
+	struct xhci_erst	erst;
+	/* Scratchpad */
+	struct xhci_scratchpad  *scratchpad;
+
+	/* slot enabling and address device helpers */
+	/* these are not thread safe so use mutex */
+	struct mutex mutex;
+	/* Internal mirror of the HW's dcbaa */
+	struct xhci_virt_device	*devs[MAX_HC_SLOTS];
+	/* For keeping track of bandwidth domains per roothub. */
+	struct xhci_root_port_bw_info	*rh_bw;
+
+	/* DMA pools */
+	struct dma_pool	*device_pool;
+	struct dma_pool	*segment_pool;
+	struct dma_pool	*small_streams_pool;
+	struct dma_pool	*medium_streams_pool;
+
+	/* Host controller watchdog timer structures */
+	unsigned int		xhc_state;
+	unsigned long		run_graceperiod;
+	struct s3_save		s3;
+/* Host controller is dying - not responding to commands. "I'm not dead yet!"
+ *
+ * xHC interrupts have been disabled and a watchdog timer will (or has already)
+ * halt the xHCI host, and complete all URBs with an -ESHUTDOWN code.  Any code
+ * that sees this status (other than the timer that set it) should stop touching
+ * hardware immediately.  Interrupt handlers should return immediately when
+ * they see this status (any time they drop and re-acquire xhci->lock).
+ * xhci_urb_dequeue() should call usb_hcd_check_unlink_urb() and return without
+ * putting the TD on the canceled list, etc.
+ *
+ * There are no reports of xHCI host controllers that display this issue.
+ */
+#define XHCI_STATE_DYING	(1 << 0)
+#define XHCI_STATE_HALTED	(1 << 1)
+#define XHCI_STATE_REMOVING	(1 << 2)
+	unsigned long long	quirks;
+#define	XHCI_LINK_TRB_QUIRK	BIT_ULL(0)
+#define XHCI_RESET_EP_QUIRK	BIT_ULL(1) /* Deprecated */
+#define XHCI_NEC_HOST		BIT_ULL(2)
+#define XHCI_AMD_PLL_FIX	BIT_ULL(3)
+#define XHCI_SPURIOUS_SUCCESS	BIT_ULL(4)
+/*
+ * Certain Intel host controllers have a limit to the number of endpoint
+ * contexts they can handle.  Ideally, they would signal that they can't handle
+ * anymore endpoint contexts by returning a Resource Error for the Configure
+ * Endpoint command, but they don't.  Instead they expect software to keep track
+ * of the number of active endpoints for them, across configure endpoint
+ * commands, reset device commands, disable slot commands, and address device
+ * commands.
+ */
+#define XHCI_EP_LIMIT_QUIRK	BIT_ULL(5)
+#define XHCI_BROKEN_MSI		BIT_ULL(6)
+#define XHCI_RESET_ON_RESUME	BIT_ULL(7)
+#define	XHCI_SW_BW_CHECKING	BIT_ULL(8)
+#define XHCI_AMD_0x96_HOST	BIT_ULL(9)
+#define XHCI_TRUST_TX_LENGTH	BIT_ULL(10)
+#define XHCI_LPM_SUPPORT	BIT_ULL(11)
+#define XHCI_INTEL_HOST		BIT_ULL(12)
+#define XHCI_SPURIOUS_REBOOT	BIT_ULL(13)
+#define XHCI_COMP_MODE_QUIRK	BIT_ULL(14)
+#define XHCI_AVOID_BEI		BIT_ULL(15)
+#define XHCI_PLAT		BIT_ULL(16)
+#define XHCI_SLOW_SUSPEND	BIT_ULL(17)
+#define XHCI_SPURIOUS_WAKEUP	BIT_ULL(18)
+/* For controllers with a broken beyond repair streams implementation */
+#define XHCI_BROKEN_STREAMS	BIT_ULL(19)
+#define XHCI_PME_STUCK_QUIRK	BIT_ULL(20)
+#define XHCI_MTK_HOST		BIT_ULL(21)
+#define XHCI_SSIC_PORT_UNUSED	BIT_ULL(22)
+#define XHCI_NO_64BIT_SUPPORT	BIT_ULL(23)
+#define XHCI_MISSING_CAS	BIT_ULL(24)
+/* For controller with a broken Port Disable implementation */
+#define XHCI_BROKEN_PORT_PED	BIT_ULL(25)
+#define XHCI_LIMIT_ENDPOINT_INTERVAL_7	BIT_ULL(26)
+#define XHCI_U2_DISABLE_WAKE	BIT_ULL(27)
+#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL	BIT_ULL(28)
+#define XHCI_HW_LPM_DISABLE	BIT_ULL(29)
+#define XHCI_SUSPEND_DELAY	BIT_ULL(30)
+#define XHCI_INTEL_USB_ROLE_SW	BIT_ULL(31)
+#define XHCI_ZERO_64B_REGS	BIT_ULL(32)
+#define XHCI_DEFAULT_PM_RUNTIME_ALLOW	BIT_ULL(33)
+#define XHCI_RESET_PLL_ON_DISCONNECT	BIT_ULL(34)
+#define XHCI_SNPS_BROKEN_SUSPEND    BIT_ULL(35)
+#define XHCI_RENESAS_FW_QUIRK	BIT_ULL(36)
+#define XHCI_SKIP_PHY_INIT	BIT_ULL(37)
+#define XHCI_DISABLE_SPARSE	BIT_ULL(38)
+#define XHCI_SG_TRB_CACHE_SIZE_QUIRK	BIT_ULL(39)
+#define XHCI_NO_SOFT_RETRY	BIT_ULL(40)
+#define XHCI_BROKEN_D3COLD_S2I	BIT_ULL(41)
+#define XHCI_EP_CTX_BROKEN_DCS	BIT_ULL(42)
+#define XHCI_SUSPEND_RESUME_CLKS	BIT_ULL(43)
+#define XHCI_RESET_TO_DEFAULT	BIT_ULL(44)
+#define XHCI_ZHAOXIN_TRB_FETCH	BIT_ULL(45)
+#define XHCI_ZHAOXIN_HOST	BIT_ULL(46)
+
+	unsigned int		num_active_eps;
+	unsigned int		limit_active_eps;
+	struct xhci_port	*hw_ports;
+	struct xhci_hub		usb2_rhub;
+	struct xhci_hub		usb3_rhub;
+	/* support xHCI 1.0 spec USB2 hardware LPM */
+	unsigned		hw_lpm_support:1;
+	/* Broken Suspend flag for SNPS Suspend resume issue */
+	unsigned		broken_suspend:1;
+	/* Indicates that omitting hcd is supported if root hub has no ports */
+	unsigned		allow_single_roothub:1;
+	/* cached usb2 extened protocol capabilites */
+	u32                     *ext_caps;
+	unsigned int            num_ext_caps;
+	/* cached extended protocol port capabilities */
+	struct xhci_port_cap	*port_caps;
+	unsigned int		num_port_caps;
+	/* Compliance Mode Recovery Data */
+	struct timer_list	comp_mode_recovery_timer;
+	u32			port_status_u0;
+	u16			test_mode;
+/* Compliance Mode Timer Triggered every 2 seconds */
+#define COMP_MODE_RCVRY_MSECS 2000
+
+	struct dentry		*debugfs_root;
+	struct dentry		*debugfs_slots;
+	struct list_head	regset_list;
+
+	void			*dbc;
+	/* platform-specific data -- must come last */
+	unsigned long		priv[] __aligned(sizeof(s64));
+};
+
+/* Platform specific overrides to generic XHCI hc_driver ops */
+struct xhci_driver_overrides {
+	size_t extra_priv_size;
+	int (*reset)(struct usb_hcd *hcd);
+	int (*start)(struct usb_hcd *hcd);
+	int (*add_endpoint)(struct usb_hcd *hcd, struct usb_device *udev,
+			    struct usb_host_endpoint *ep);
+	int (*drop_endpoint)(struct usb_hcd *hcd, struct usb_device *udev,
+			     struct usb_host_endpoint *ep);
+	int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
+	void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
+	int (*update_hub_device)(struct usb_hcd *hcd, struct usb_device *hdev,
+			    struct usb_tt *tt, gfp_t mem_flags);
+};
+
+#define	XHCI_CFC_DELAY		10
+
+/* convert between an HCD pointer and the corresponding EHCI_HCD */
+static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd)
+{
+	struct usb_hcd *primary_hcd;
+
+	if (usb_hcd_is_primary_hcd(hcd))
+		primary_hcd = hcd;
+	else
+		primary_hcd = hcd->primary_hcd;
+
+	return (struct xhci_hcd *) (primary_hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
+{
+	return xhci->main_hcd;
+}
+
+static inline struct usb_hcd *xhci_get_usb3_hcd(struct xhci_hcd *xhci)
+{
+	if (xhci->shared_hcd)
+		return xhci->shared_hcd;
+
+	if (!xhci->usb2_rhub.num_ports)
+		return xhci->main_hcd;
+
+	return NULL;
+}
+
+static inline bool xhci_hcd_is_usb3(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+	return hcd == xhci_get_usb3_hcd(xhci);
+}
+
+static inline bool xhci_has_one_roothub(struct xhci_hcd *xhci)
+{
+	return xhci->allow_single_roothub &&
+	       (!xhci->usb2_rhub.num_ports || !xhci->usb3_rhub.num_ports);
+}
+
+#define xhci_dbg(xhci, fmt, args...) \
+	dev_dbg(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+#define xhci_err(xhci, fmt, args...) \
+	dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+#define xhci_warn(xhci, fmt, args...) \
+	dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+#define xhci_warn_ratelimited(xhci, fmt, args...) \
+	dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+#define xhci_info(xhci, fmt, args...) \
+	dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+
+/*
+ * Registers should always be accessed with double word or quad word accesses.
+ *
+ * Some xHCI implementations may support 64-bit address pointers.  Registers
+ * with 64-bit address pointers should be written to with dword accesses by
+ * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
+ * xHCI implementations that do not support 64-bit address pointers will ignore
+ * the high dword, and write order is irrelevant.
+ */
+static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
+		__le64 __iomem *regs)
+{
+	return lo_hi_readq(regs);
+}
+static inline void xhci_write_64(struct xhci_hcd *xhci,
+				 const u64 val, __le64 __iomem *regs)
+{
+	lo_hi_writeq(val, regs);
+}
+
+static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
+{
+	return xhci->quirks & XHCI_LINK_TRB_QUIRK;
+}
+
+/* xHCI debugging */
+char *xhci_get_slot_state(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *ctx);
+void xhci_dbg_trace(struct xhci_hcd *xhci, void (*trace)(struct va_format *),
+			const char *fmt, ...);
+
+/* xHCI memory management */
+void xhci_mem_cleanup(struct xhci_hcd *xhci);
+int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
+void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
+int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
+int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+		struct usb_device *udev);
+unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
+unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
+void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
+void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int old_active_eps);
+void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info);
+void xhci_update_bw_info(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_input_control_ctx *ctrl_ctx,
+		struct xhci_virt_device *virt_dev);
+void xhci_endpoint_copy(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_container_ctx *out_ctx,
+		unsigned int ep_index);
+void xhci_slot_copy(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_container_ctx *out_ctx);
+int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
+		struct usb_device *udev, struct usb_host_endpoint *ep,
+		gfp_t mem_flags);
+struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
+		unsigned int num_segs, unsigned int cycle_state,
+		enum xhci_ring_type type, unsigned int max_packet, gfp_t flags);
+void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
+int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
+		unsigned int num_trbs, gfp_t flags);
+int xhci_alloc_erst(struct xhci_hcd *xhci,
+		struct xhci_ring *evt_ring,
+		struct xhci_erst *erst,
+		gfp_t flags);
+void xhci_initialize_ring_info(struct xhci_ring *ring,
+			unsigned int cycle_state);
+void xhci_free_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
+void xhci_free_endpoint_ring(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		unsigned int ep_index);
+struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
+		unsigned int num_stream_ctxs,
+		unsigned int num_streams,
+		unsigned int max_packet, gfp_t flags);
+void xhci_free_stream_info(struct xhci_hcd *xhci,
+		struct xhci_stream_info *stream_info);
+void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
+		struct xhci_ep_ctx *ep_ctx,
+		struct xhci_stream_info *stream_info);
+void xhci_setup_no_streams_ep_input_ctx(struct xhci_ep_ctx *ep_ctx,
+		struct xhci_virt_ep *ep);
+void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
+	struct xhci_virt_device *virt_dev, bool drop_control_ep);
+struct xhci_ring *xhci_dma_to_transfer_ring(
+		struct xhci_virt_ep *ep,
+		u64 address);
+struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
+		bool allocate_completion, gfp_t mem_flags);
+struct xhci_command *xhci_alloc_command_with_ctx(struct xhci_hcd *xhci,
+		bool allocate_completion, gfp_t mem_flags);
+void xhci_urb_free_priv(struct urb_priv *urb_priv);
+void xhci_free_command(struct xhci_hcd *xhci,
+		struct xhci_command *command);
+struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
+		int type, gfp_t flags);
+void xhci_free_container_ctx(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *ctx);
+
+/* xHCI host controller glue */
+typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
+int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us);
+void xhci_quiesce(struct xhci_hcd *xhci);
+int xhci_halt(struct xhci_hcd *xhci);
+int xhci_start(struct xhci_hcd *xhci);
+int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us);
+int xhci_run(struct usb_hcd *hcd);
+int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
+void xhci_shutdown(struct usb_hcd *hcd);
+void xhci_init_driver(struct hc_driver *drv,
+		      const struct xhci_driver_overrides *over);
+int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+		      struct usb_host_endpoint *ep);
+int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+		       struct usb_host_endpoint *ep);
+int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
+void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
+			   struct usb_tt *tt, gfp_t mem_flags);
+int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id);
+int xhci_ext_cap_init(struct xhci_hcd *xhci);
+
+int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup);
+int xhci_resume(struct xhci_hcd *xhci, bool hibernated);
+
+irqreturn_t xhci_irq(struct usb_hcd *hcd);
+irqreturn_t xhci_msi_irq(int irq, void *hcd);
+int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_alloc_tt_info(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		struct usb_device *hdev,
+		struct usb_tt *tt, gfp_t mem_flags);
+
+/* xHCI ring, segment, TRB, and TD functions */
+dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
+struct xhci_segment *trb_in_td(struct xhci_hcd *xhci,
+		struct xhci_segment *start_seg, union xhci_trb *start_trb,
+		union xhci_trb *end_trb, dma_addr_t suspect_dma, bool debug);
+int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
+void xhci_ring_cmd_db(struct xhci_hcd *xhci);
+int xhci_queue_slot_control(struct xhci_hcd *xhci, struct xhci_command *cmd,
+		u32 trb_type, u32 slot_id);
+int xhci_queue_address_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
+		dma_addr_t in_ctx_ptr, u32 slot_id, enum xhci_setup_dev);
+int xhci_queue_vendor_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
+		u32 field1, u32 field2, u32 field3, u32 field4);
+int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, struct xhci_command *cmd,
+		int slot_id, unsigned int ep_index, int suspend);
+int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
+		int slot_id, unsigned int ep_index);
+int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
+		int slot_id, unsigned int ep_index);
+int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
+		int slot_id, unsigned int ep_index);
+int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
+		struct urb *urb, int slot_id, unsigned int ep_index);
+int xhci_queue_configure_endpoint(struct xhci_hcd *xhci,
+		struct xhci_command *cmd, dma_addr_t in_ctx_ptr, u32 slot_id,
+		bool command_must_succeed);
+int xhci_queue_evaluate_context(struct xhci_hcd *xhci, struct xhci_command *cmd,
+		dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed);
+int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd,
+		int slot_id, unsigned int ep_index,
+		enum xhci_ep_reset_type reset_type);
+int xhci_queue_reset_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
+		u32 slot_id);
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int slot_id,
+			       unsigned int ep_index, unsigned int stream_id,
+			       struct xhci_td *td);
+void xhci_stop_endpoint_command_watchdog(struct timer_list *t);
+void xhci_handle_command_timeout(struct work_struct *work);
+
+void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
+		unsigned int ep_index, unsigned int stream_id);
+void xhci_ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
+		unsigned int slot_id,
+		unsigned int ep_index);
+void xhci_cleanup_command_queue(struct xhci_hcd *xhci);
+void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring);
+unsigned int count_trbs(u64 addr, u64 len);
+
+/* xHCI roothub code */
+void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
+				u32 link_state);
+void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port,
+				u32 port_bit);
+int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
+		char *buf, u16 wLength);
+int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1);
+struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd);
+
+void xhci_hc_died(struct xhci_hcd *xhci);
+
+#ifdef CONFIG_PM
+int xhci_bus_suspend(struct usb_hcd *hcd);
+int xhci_bus_resume(struct usb_hcd *hcd);
+unsigned long xhci_get_resuming_ports(struct usb_hcd *hcd);
+#else
+#define	xhci_bus_suspend	NULL
+#define	xhci_bus_resume		NULL
+#define	xhci_get_resuming_ports	NULL
+#endif	/* CONFIG_PM */
+
+u32 xhci_port_state_to_neutral(u32 state);
+int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		u16 port);
+void xhci_ring_device(struct xhci_hcd *xhci, int slot_id);
+
+/* xHCI contexts */
+struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_container_ctx *ctx);
+struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
+struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
+
+struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		unsigned int stream_id);
+
+static inline struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
+								struct urb *urb)
+{
+	return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id,
+					xhci_get_endpoint_index(&urb->ep->desc),
+					urb->stream_id);
+}
+
+/*
+ * TODO: As per spec Isochronous IDT transmissions are supported. We bypass
+ * them anyways as we where unable to find a device that matches the
+ * constraints.
+ */
+static inline bool xhci_urb_suitable_for_idt(struct urb *urb)
+{
+	if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) &&
+	    usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE &&
+	    urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE &&
+	    !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) &&
+	    !urb->num_sgs)
+		return true;
+
+	return false;
+}
+
+static inline char *xhci_slot_state_string(u32 state)
+{
+	switch (state) {
+	case SLOT_STATE_ENABLED:
+		return "enabled/disabled";
+	case SLOT_STATE_DEFAULT:
+		return "default";
+	case SLOT_STATE_ADDRESSED:
+		return "addressed";
+	case SLOT_STATE_CONFIGURED:
+		return "configured";
+	default:
+		return "reserved";
+	}
+}
+
+static inline const char *xhci_decode_trb(char *str, size_t size,
+					  u32 field0, u32 field1, u32 field2, u32 field3)
+{
+	int type = TRB_FIELD_TO_TYPE(field3);
+
+	switch (type) {
+	case TRB_LINK:
+		snprintf(str, size,
+			"LINK %08x%08x intr %d type '%s' flags %c:%c:%c:%c",
+			field1, field0, GET_INTR_TARGET(field2),
+			xhci_trb_type_string(type),
+			field3 & TRB_IOC ? 'I' : 'i',
+			field3 & TRB_CHAIN ? 'C' : 'c',
+			field3 & TRB_TC ? 'T' : 't',
+			field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_TRANSFER:
+	case TRB_COMPLETION:
+	case TRB_PORT_STATUS:
+	case TRB_BANDWIDTH_EVENT:
+	case TRB_DOORBELL:
+	case TRB_HC_EVENT:
+	case TRB_DEV_NOTE:
+	case TRB_MFINDEX_WRAP:
+		snprintf(str, size,
+			"TRB %08x%08x status '%s' len %d slot %d ep %d type '%s' flags %c:%c",
+			field1, field0,
+			xhci_trb_comp_code_string(GET_COMP_CODE(field2)),
+			EVENT_TRB_LEN(field2), TRB_TO_SLOT_ID(field3),
+			/* Macro decrements 1, maybe it shouldn't?!? */
+			TRB_TO_EP_INDEX(field3) + 1,
+			xhci_trb_type_string(type),
+			field3 & EVENT_DATA ? 'E' : 'e',
+			field3 & TRB_CYCLE ? 'C' : 'c');
+
+		break;
+	case TRB_SETUP:
+		snprintf(str, size,
+			"bRequestType %02x bRequest %02x wValue %02x%02x wIndex %02x%02x wLength %d length %d TD size %d intr %d type '%s' flags %c:%c:%c",
+				field0 & 0xff,
+				(field0 & 0xff00) >> 8,
+				(field0 & 0xff000000) >> 24,
+				(field0 & 0xff0000) >> 16,
+				(field1 & 0xff00) >> 8,
+				field1 & 0xff,
+				(field1 & 0xff000000) >> 16 |
+				(field1 & 0xff0000) >> 16,
+				TRB_LEN(field2), GET_TD_SIZE(field2),
+				GET_INTR_TARGET(field2),
+				xhci_trb_type_string(type),
+				field3 & TRB_IDT ? 'I' : 'i',
+				field3 & TRB_IOC ? 'I' : 'i',
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_DATA:
+		snprintf(str, size,
+			 "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c",
+				field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2),
+				GET_INTR_TARGET(field2),
+				xhci_trb_type_string(type),
+				field3 & TRB_IDT ? 'I' : 'i',
+				field3 & TRB_IOC ? 'I' : 'i',
+				field3 & TRB_CHAIN ? 'C' : 'c',
+				field3 & TRB_NO_SNOOP ? 'S' : 's',
+				field3 & TRB_ISP ? 'I' : 'i',
+				field3 & TRB_ENT ? 'E' : 'e',
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_STATUS:
+		snprintf(str, size,
+			 "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c",
+				field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2),
+				GET_INTR_TARGET(field2),
+				xhci_trb_type_string(type),
+				field3 & TRB_IOC ? 'I' : 'i',
+				field3 & TRB_CHAIN ? 'C' : 'c',
+				field3 & TRB_ENT ? 'E' : 'e',
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_NORMAL:
+	case TRB_ISOC:
+	case TRB_EVENT_DATA:
+	case TRB_TR_NOOP:
+		snprintf(str, size,
+			"Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c:%c",
+			field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2),
+			GET_INTR_TARGET(field2),
+			xhci_trb_type_string(type),
+			field3 & TRB_BEI ? 'B' : 'b',
+			field3 & TRB_IDT ? 'I' : 'i',
+			field3 & TRB_IOC ? 'I' : 'i',
+			field3 & TRB_CHAIN ? 'C' : 'c',
+			field3 & TRB_NO_SNOOP ? 'S' : 's',
+			field3 & TRB_ISP ? 'I' : 'i',
+			field3 & TRB_ENT ? 'E' : 'e',
+			field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+
+	case TRB_CMD_NOOP:
+	case TRB_ENABLE_SLOT:
+		snprintf(str, size,
+			"%s: flags %c",
+			xhci_trb_type_string(type),
+			field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_DISABLE_SLOT:
+	case TRB_NEG_BANDWIDTH:
+		snprintf(str, size,
+			"%s: slot %d flags %c",
+			xhci_trb_type_string(type),
+			TRB_TO_SLOT_ID(field3),
+			field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_ADDR_DEV:
+		snprintf(str, size,
+			"%s: ctx %08x%08x slot %d flags %c:%c",
+			xhci_trb_type_string(type),
+			field1, field0,
+			TRB_TO_SLOT_ID(field3),
+			field3 & TRB_BSR ? 'B' : 'b',
+			field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_CONFIG_EP:
+		snprintf(str, size,
+			"%s: ctx %08x%08x slot %d flags %c:%c",
+			xhci_trb_type_string(type),
+			field1, field0,
+			TRB_TO_SLOT_ID(field3),
+			field3 & TRB_DC ? 'D' : 'd',
+			field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_EVAL_CONTEXT:
+		snprintf(str, size,
+			"%s: ctx %08x%08x slot %d flags %c",
+			xhci_trb_type_string(type),
+			field1, field0,
+			TRB_TO_SLOT_ID(field3),
+			field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_RESET_EP:
+		snprintf(str, size,
+			"%s: ctx %08x%08x slot %d ep %d flags %c:%c",
+			xhci_trb_type_string(type),
+			field1, field0,
+			TRB_TO_SLOT_ID(field3),
+			/* Macro decrements 1, maybe it shouldn't?!? */
+			TRB_TO_EP_INDEX(field3) + 1,
+			field3 & TRB_TSP ? 'T' : 't',
+			field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_STOP_RING:
+		snprintf(str, size,
+			"%s: slot %d sp %d ep %d flags %c",
+			xhci_trb_type_string(type),
+			TRB_TO_SLOT_ID(field3),
+			TRB_TO_SUSPEND_PORT(field3),
+			/* Macro decrements 1, maybe it shouldn't?!? */
+			TRB_TO_EP_INDEX(field3) + 1,
+			field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_SET_DEQ:
+		snprintf(str, size,
+			"%s: deq %08x%08x stream %d slot %d ep %d flags %c",
+			xhci_trb_type_string(type),
+			field1, field0,
+			TRB_TO_STREAM_ID(field2),
+			TRB_TO_SLOT_ID(field3),
+			/* Macro decrements 1, maybe it shouldn't?!? */
+			TRB_TO_EP_INDEX(field3) + 1,
+			field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_RESET_DEV:
+		snprintf(str, size,
+			"%s: slot %d flags %c",
+			xhci_trb_type_string(type),
+			TRB_TO_SLOT_ID(field3),
+			field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_FORCE_EVENT:
+		snprintf(str, size,
+			"%s: event %08x%08x vf intr %d vf id %d flags %c",
+			xhci_trb_type_string(type),
+			field1, field0,
+			TRB_TO_VF_INTR_TARGET(field2),
+			TRB_TO_VF_ID(field3),
+			field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_SET_LT:
+		snprintf(str, size,
+			"%s: belt %d flags %c",
+			xhci_trb_type_string(type),
+			TRB_TO_BELT(field3),
+			field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_GET_BW:
+		snprintf(str, size,
+			"%s: ctx %08x%08x slot %d speed %d flags %c",
+			xhci_trb_type_string(type),
+			field1, field0,
+			TRB_TO_SLOT_ID(field3),
+			TRB_TO_DEV_SPEED(field3),
+			field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_FORCE_HEADER:
+		snprintf(str, size,
+			"%s: info %08x%08x%08x pkt type %d roothub port %d flags %c",
+			xhci_trb_type_string(type),
+			field2, field1, field0 & 0xffffffe0,
+			TRB_TO_PACKET_TYPE(field0),
+			TRB_TO_ROOTHUB_PORT(field3),
+			field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	default:
+		snprintf(str, size,
+			"type '%s' -> raw %08x %08x %08x %08x",
+			xhci_trb_type_string(type),
+			field0, field1, field2, field3);
+	}
+
+	return str;
+}
+
+static inline const char *xhci_decode_ctrl_ctx(char *str,
+		unsigned long drop, unsigned long add)
+{
+	unsigned int	bit;
+	int		ret = 0;
+
+	str[0] = '\0';
+
+	if (drop) {
+		ret = sprintf(str, "Drop:");
+		for_each_set_bit(bit, &drop, 32)
+			ret += sprintf(str + ret, " %d%s",
+				       bit / 2,
+				       bit % 2 ? "in":"out");
+		ret += sprintf(str + ret, ", ");
+	}
+
+	if (add) {
+		ret += sprintf(str + ret, "Add:%s%s",
+			       (add & SLOT_FLAG) ? " slot":"",
+			       (add & EP0_FLAG) ? " ep0":"");
+		add &= ~(SLOT_FLAG | EP0_FLAG);
+		for_each_set_bit(bit, &add, 32)
+			ret += sprintf(str + ret, " %d%s",
+				       bit / 2,
+				       bit % 2 ? "in":"out");
+	}
+	return str;
+}
+
+static inline const char *xhci_decode_slot_context(char *str,
+		u32 info, u32 info2, u32 tt_info, u32 state)
+{
+	u32 speed;
+	u32 hub;
+	u32 mtt;
+	int ret = 0;
+
+	speed = info & DEV_SPEED;
+	hub = info & DEV_HUB;
+	mtt = info & DEV_MTT;
+
+	ret = sprintf(str, "RS %05x %s%s%s Ctx Entries %d MEL %d us Port# %d/%d",
+			info & ROUTE_STRING_MASK,
+			({ char *s;
+			switch (speed) {
+			case SLOT_SPEED_FS:
+				s = "full-speed";
+				break;
+			case SLOT_SPEED_LS:
+				s = "low-speed";
+				break;
+			case SLOT_SPEED_HS:
+				s = "high-speed";
+				break;
+			case SLOT_SPEED_SS:
+				s = "super-speed";
+				break;
+			case SLOT_SPEED_SSP:
+				s = "super-speed plus";
+				break;
+			default:
+				s = "UNKNOWN speed";
+			} s; }),
+			mtt ? " multi-TT" : "",
+			hub ? " Hub" : "",
+			(info & LAST_CTX_MASK) >> 27,
+			info2 & MAX_EXIT,
+			DEVINFO_TO_ROOT_HUB_PORT(info2),
+			DEVINFO_TO_MAX_PORTS(info2));
+
+	ret += sprintf(str + ret, " [TT Slot %d Port# %d TTT %d Intr %d] Addr %d State %s",
+			tt_info & TT_SLOT, (tt_info & TT_PORT) >> 8,
+			GET_TT_THINK_TIME(tt_info), GET_INTR_TARGET(tt_info),
+			state & DEV_ADDR_MASK,
+			xhci_slot_state_string(GET_SLOT_STATE(state)));
+
+	return str;
+}
+
+
+static inline const char *xhci_portsc_link_state_string(u32 portsc)
+{
+	switch (portsc & PORT_PLS_MASK) {
+	case XDEV_U0:
+		return "U0";
+	case XDEV_U1:
+		return "U1";
+	case XDEV_U2:
+		return "U2";
+	case XDEV_U3:
+		return "U3";
+	case XDEV_DISABLED:
+		return "Disabled";
+	case XDEV_RXDETECT:
+		return "RxDetect";
+	case XDEV_INACTIVE:
+		return "Inactive";
+	case XDEV_POLLING:
+		return "Polling";
+	case XDEV_RECOVERY:
+		return "Recovery";
+	case XDEV_HOT_RESET:
+		return "Hot Reset";
+	case XDEV_COMP_MODE:
+		return "Compliance mode";
+	case XDEV_TEST_MODE:
+		return "Test mode";
+	case XDEV_RESUME:
+		return "Resume";
+	default:
+		break;
+	}
+	return "Unknown";
+}
+
+static inline const char *xhci_decode_portsc(char *str, u32 portsc)
+{
+	int ret;
+
+	ret = sprintf(str, "%s %s %s Link:%s PortSpeed:%d ",
+		      portsc & PORT_POWER	? "Powered" : "Powered-off",
+		      portsc & PORT_CONNECT	? "Connected" : "Not-connected",
+		      portsc & PORT_PE		? "Enabled" : "Disabled",
+		      xhci_portsc_link_state_string(portsc),
+		      DEV_PORT_SPEED(portsc));
+
+	if (portsc & PORT_OC)
+		ret += sprintf(str + ret, "OverCurrent ");
+	if (portsc & PORT_RESET)
+		ret += sprintf(str + ret, "In-Reset ");
+
+	ret += sprintf(str + ret, "Change: ");
+	if (portsc & PORT_CSC)
+		ret += sprintf(str + ret, "CSC ");
+	if (portsc & PORT_PEC)
+		ret += sprintf(str + ret, "PEC ");
+	if (portsc & PORT_WRC)
+		ret += sprintf(str + ret, "WRC ");
+	if (portsc & PORT_OCC)
+		ret += sprintf(str + ret, "OCC ");
+	if (portsc & PORT_RC)
+		ret += sprintf(str + ret, "PRC ");
+	if (portsc & PORT_PLC)
+		ret += sprintf(str + ret, "PLC ");
+	if (portsc & PORT_CEC)
+		ret += sprintf(str + ret, "CEC ");
+	if (portsc & PORT_CAS)
+		ret += sprintf(str + ret, "CAS ");
+
+	ret += sprintf(str + ret, "Wake: ");
+	if (portsc & PORT_WKCONN_E)
+		ret += sprintf(str + ret, "WCE ");
+	if (portsc & PORT_WKDISC_E)
+		ret += sprintf(str + ret, "WDE ");
+	if (portsc & PORT_WKOC_E)
+		ret += sprintf(str + ret, "WOE ");
+
+	return str;
+}
+
+static inline const char *xhci_decode_usbsts(char *str, u32 usbsts)
+{
+	int ret = 0;
+
+	ret = sprintf(str, " 0x%08x", usbsts);
+
+	if (usbsts == ~(u32)0)
+		return str;
+
+	if (usbsts & STS_HALT)
+		ret += sprintf(str + ret, " HCHalted");
+	if (usbsts & STS_FATAL)
+		ret += sprintf(str + ret, " HSE");
+	if (usbsts & STS_EINT)
+		ret += sprintf(str + ret, " EINT");
+	if (usbsts & STS_PORT)
+		ret += sprintf(str + ret, " PCD");
+	if (usbsts & STS_SAVE)
+		ret += sprintf(str + ret, " SSS");
+	if (usbsts & STS_RESTORE)
+		ret += sprintf(str + ret, " RSS");
+	if (usbsts & STS_SRE)
+		ret += sprintf(str + ret, " SRE");
+	if (usbsts & STS_CNR)
+		ret += sprintf(str + ret, " CNR");
+	if (usbsts & STS_HCE)
+		ret += sprintf(str + ret, " HCE");
+
+	return str;
+}
+
+static inline const char *xhci_decode_doorbell(char *str, u32 slot, u32 doorbell)
+{
+	u8 ep;
+	u16 stream;
+	int ret;
+
+	ep = (doorbell & 0xff);
+	stream = doorbell >> 16;
+
+	if (slot == 0) {
+		sprintf(str, "Command Ring %d", doorbell);
+		return str;
+	}
+	ret = sprintf(str, "Slot %d ", slot);
+	if (ep > 0 && ep < 32)
+		ret = sprintf(str + ret, "ep%d%s",
+			      ep / 2,
+			      ep % 2 ? "in" : "out");
+	else if (ep == 0 || ep < 248)
+		ret = sprintf(str + ret, "Reserved %d", ep);
+	else
+		ret = sprintf(str + ret, "Vendor Defined %d", ep);
+	if (stream)
+		ret = sprintf(str + ret, " Stream %d", stream);
+
+	return str;
+}
+
+static inline const char *xhci_ep_state_string(u8 state)
+{
+	switch (state) {
+	case EP_STATE_DISABLED:
+		return "disabled";
+	case EP_STATE_RUNNING:
+		return "running";
+	case EP_STATE_HALTED:
+		return "halted";
+	case EP_STATE_STOPPED:
+		return "stopped";
+	case EP_STATE_ERROR:
+		return "error";
+	default:
+		return "INVALID";
+	}
+}
+
+static inline const char *xhci_ep_type_string(u8 type)
+{
+	switch (type) {
+	case ISOC_OUT_EP:
+		return "Isoc OUT";
+	case BULK_OUT_EP:
+		return "Bulk OUT";
+	case INT_OUT_EP:
+		return "Int OUT";
+	case CTRL_EP:
+		return "Ctrl";
+	case ISOC_IN_EP:
+		return "Isoc IN";
+	case BULK_IN_EP:
+		return "Bulk IN";
+	case INT_IN_EP:
+		return "Int IN";
+	default:
+		return "INVALID";
+	}
+}
+
+static inline const char *xhci_decode_ep_context(char *str, u32 info,
+		u32 info2, u64 deq, u32 tx_info)
+{
+	int ret;
+
+	u32 esit;
+	u16 maxp;
+	u16 avg;
+
+	u8 max_pstr;
+	u8 ep_state;
+	u8 interval;
+	u8 ep_type;
+	u8 burst;
+	u8 cerr;
+	u8 mult;
+
+	bool lsa;
+	bool hid;
+
+	esit = CTX_TO_MAX_ESIT_PAYLOAD_HI(info) << 16 |
+		CTX_TO_MAX_ESIT_PAYLOAD(tx_info);
+
+	ep_state = info & EP_STATE_MASK;
+	max_pstr = CTX_TO_EP_MAXPSTREAMS(info);
+	interval = CTX_TO_EP_INTERVAL(info);
+	mult = CTX_TO_EP_MULT(info) + 1;
+	lsa = !!(info & EP_HAS_LSA);
+
+	cerr = (info2 & (3 << 1)) >> 1;
+	ep_type = CTX_TO_EP_TYPE(info2);
+	hid = !!(info2 & (1 << 7));
+	burst = CTX_TO_MAX_BURST(info2);
+	maxp = MAX_PACKET_DECODED(info2);
+
+	avg = EP_AVG_TRB_LENGTH(tx_info);
+
+	ret = sprintf(str, "State %s mult %d max P. Streams %d %s",
+			xhci_ep_state_string(ep_state), mult,
+			max_pstr, lsa ? "LSA " : "");
+
+	ret += sprintf(str + ret, "interval %d us max ESIT payload %d CErr %d ",
+			(1 << interval) * 125, esit, cerr);
+
+	ret += sprintf(str + ret, "Type %s %sburst %d maxp %d deq %016llx ",
+			xhci_ep_type_string(ep_type), hid ? "HID" : "",
+			burst, maxp, deq);
+
+	ret += sprintf(str + ret, "avg trb len %d", avg);
+
+	return str;
+}
+
+#endif /* __LINUX_XHCI_HCD_H */
diff --git a/drivers/usb/image/Kconfig b/drivers/usb/image/Kconfig
new file mode 100644
index 000000000..a65c638e7
--- /dev/null
+++ b/drivers/usb/image/Kconfig
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Imaging devices configuration
+#
+comment "USB Imaging devices"
+
+config USB_MDC800
+	tristate "USB Mustek MDC800 Digital Camera support"
+	help
+	  Say Y here if you want to connect this type of still camera to
+	  your computer's USB port. This driver can be used with gphoto 0.4.3
+	  and higher (look at <http://www.gphoto.org/>).
+	  To use it create a device node with "mknod /dev/mustek c 180 32" and
+	  configure it in your software.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mdc800.
+
+config USB_MICROTEK
+	tristate "Microtek X6USB scanner support"
+	depends on SCSI
+	help
+	  Say Y here if you want support for the Microtek X6USB and
+	  possibly the Phantom 336CX, Phantom C6 and ScanMaker V6U(S)L.
+	  Support for anything but the X6 is experimental.
+	  Please report failures and successes.
+	  The scanner will appear as a scsi generic device to the rest
+	  of the system. Scsi support is required.
+	  This driver can be compiled as a module, called microtek.
diff --git a/drivers/usb/image/Makefile b/drivers/usb/image/Makefile
new file mode 100644
index 000000000..8997c81ba
--- /dev/null
+++ b/drivers/usb/image/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for USB Image drivers
+#
+
+obj-$(CONFIG_USB_MDC800)	+= mdc800.o
+obj-$(CONFIG_USB_MICROTEK)	+= microtek.o
diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
new file mode 100644
index 000000000..67f098579
--- /dev/null
+++ b/drivers/usb/image/mdc800.c
@@ -0,0 +1,1077 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * copyright (C) 1999/2000 by Henning Zabel <henning@uni-paderborn.de>
+ */
+
+
+/*
+ *	USB-Kernel Driver for the Mustek MDC800 Digital Camera
+ *	(c) 1999/2000 Henning Zabel <henning@uni-paderborn.de>
+ *
+ *
+ * The driver brings the USB functions of the MDC800 to Linux.
+ * To use the Camera you must support the USB Protocol of the camera
+ * to the Kernel Node.
+ * The Driver uses a misc device Node. Create it with :
+ * mknod /dev/mustek c 180 32
+ *
+ * The driver supports only one camera.
+ * 
+ * Fix: mdc800 used sleep_on and slept with io_lock held.
+ * Converted sleep_on to waitqueues with schedule_timeout and made io_lock
+ * a semaphore from a spinlock.
+ * by Oliver Neukum <oliver@neukum.name>
+ * (02/12/2001)
+ * 
+ * Identify version on module load.
+ * (08/04/2001) gb
+ *
+ * version 0.7.5
+ * Fixed potential SMP races with Spinlocks.
+ * Thanks to Oliver Neukum <oliver@neukum.name> who 
+ * noticed the race conditions.
+ * (30/10/2000)
+ *
+ * Fixed: Setting urb->dev before submitting urb.
+ * by Greg KH <greg@kroah.com>
+ * (13/10/2000)
+ *
+ * version 0.7.3
+ * bugfix : The mdc800->state field gets set to READY after the
+ * disconnect function sets it to NOT_CONNECTED. This makes the
+ * driver running like the camera is connected and causes some
+ * hang ups.
+ *
+ * version 0.7.1
+ * MOD_INC and MOD_DEC are changed in usb_probe to prevent load/unload
+ * problems when compiled as Module.
+ * (04/04/2000)
+ *
+ * The mdc800 driver gets assigned the USB Minor 32-47. The Registration
+ * was updated to use these values.
+ * (26/03/2000)
+ *
+ * The Init und Exit Module Function are updated.
+ * (01/03/2000)
+ *
+ * version 0.7.0
+ * Rewrite of the driver : The driver now uses URB's. The old stuff
+ * has been removed.
+ *
+ * version 0.6.0
+ * Rewrite of this driver: The Emulation of the rs232 protocoll
+ * has been removed from the driver. A special executeCommand function
+ * for this driver is included to gphoto.
+ * The driver supports two kind of communication to bulk endpoints.
+ * Either with the dev->bus->ops->bulk... or with callback function.
+ * (09/11/1999)
+ *
+ * version 0.5.0:
+ * first Version that gets a version number. Most of the needed
+ * functions work.
+ * (20/10/1999)
+ */
+
+#include <linux/sched/signal.h>
+#include <linux/signal.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/random.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/wait.h>
+#include <linux/mutex.h>
+
+#include <linux/usb.h>
+#include <linux/fs.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v0.7.5 (30/10/2000)"
+#define DRIVER_AUTHOR "Henning Zabel <henning@uni-paderborn.de>"
+#define DRIVER_DESC "USB Driver for Mustek MDC800 Digital Camera"
+
+/* Vendor and Product Information */
+#define MDC800_VENDOR_ID 	0x055f
+#define MDC800_PRODUCT_ID	0xa800
+
+/* Timeouts (msec) */
+#define TO_DOWNLOAD_GET_READY		1500
+#define TO_DOWNLOAD_GET_BUSY		1500
+#define TO_WRITE_GET_READY		1000
+#define TO_DEFAULT_COMMAND		5000
+#define TO_READ_FROM_IRQ 		TO_DEFAULT_COMMAND
+#define TO_GET_READY			TO_DEFAULT_COMMAND
+
+/* Minor Number of the device (create with mknod /dev/mustek c 180 32) */
+#define MDC800_DEVICE_MINOR_BASE 32
+
+
+/**************************************************************************
+	Data and structs
+***************************************************************************/
+
+
+typedef enum {
+	NOT_CONNECTED, READY, WORKING, DOWNLOAD
+} mdc800_state;
+
+
+/* Data for the driver */
+struct mdc800_data
+{
+	struct usb_device *	dev;			// Device Data
+	mdc800_state 		state;
+
+	unsigned int		endpoint [4];
+
+	struct urb *		irq_urb;
+	wait_queue_head_t	irq_wait;
+	int			irq_woken;
+	char*			irq_urb_buffer;
+
+	int			camera_busy;          // is camera busy ?
+	int 			camera_request_ready; // Status to synchronize with irq
+	char 			camera_response [8];  // last Bytes send after busy
+
+	struct urb *   		write_urb;
+	char*			write_urb_buffer;
+	wait_queue_head_t	write_wait;
+	int			written;
+
+
+	struct urb *   		download_urb;
+	char*			download_urb_buffer;
+	wait_queue_head_t	download_wait;
+	int			downloaded;
+	int			download_left;		// Bytes left to download ?
+
+
+	/* Device Data */
+	char			out [64];	// Answer Buffer
+	int 			out_ptr;	// Index to the first not readen byte
+	int			out_count;	// Bytes in the buffer
+
+	int			open;		// Camera device open ?
+	struct mutex		io_lock;	// IO -lock
+
+	char 			in [8];		// Command Input Buffer
+	int  			in_count;
+
+	int			pic_index;	// Cache for the Imagesize (-1 for nothing cached )
+	int			pic_len;
+	int			minor;
+};
+
+
+/* Specification of the Endpoints */
+static struct usb_endpoint_descriptor mdc800_ed [4] =
+{
+	{ 
+		.bLength = 		0,
+		.bDescriptorType =	0,
+		.bEndpointAddress =	0x01,
+		.bmAttributes = 	0x02,
+		.wMaxPacketSize =	cpu_to_le16(8),
+		.bInterval = 		0,
+		.bRefresh = 		0,
+		.bSynchAddress = 	0,
+	},
+	{
+		.bLength = 		0,
+		.bDescriptorType = 	0,
+		.bEndpointAddress = 	0x82,
+		.bmAttributes = 	0x03,
+		.wMaxPacketSize = 	cpu_to_le16(8),
+		.bInterval = 		0,
+		.bRefresh = 		0,
+		.bSynchAddress = 	0,
+	},
+	{
+		.bLength = 		0,
+		.bDescriptorType = 	0,
+		.bEndpointAddress = 	0x03,
+		.bmAttributes = 	0x02,
+		.wMaxPacketSize = 	cpu_to_le16(64),
+		.bInterval = 		0,
+		.bRefresh = 		0,
+		.bSynchAddress = 	0,
+	},
+	{
+		.bLength = 		0,
+		.bDescriptorType = 	0,
+		.bEndpointAddress = 	0x84,
+		.bmAttributes = 	0x02,
+		.wMaxPacketSize = 	cpu_to_le16(64),
+		.bInterval = 		0,
+		.bRefresh = 		0,
+		.bSynchAddress = 	0,
+	},
+};
+
+/* The Variable used by the driver */
+static struct mdc800_data* mdc800;
+
+
+/***************************************************************************
+	The USB Part of the driver
+****************************************************************************/
+
+static int mdc800_endpoint_equals (struct usb_endpoint_descriptor *a,struct usb_endpoint_descriptor *b)
+{
+	return (
+		   ( a->bEndpointAddress == b->bEndpointAddress )
+		&& ( a->bmAttributes     == b->bmAttributes     )
+		&& ( a->wMaxPacketSize   == b->wMaxPacketSize   )
+	);
+}
+
+
+/*
+ * Checks whether the camera responds busy
+ */
+static int mdc800_isBusy (char* ch)
+{
+	int i=0;
+	while (i<8)
+	{
+		if (ch [i] != (char)0x99)
+			return 0;
+		i++;
+	}
+	return 1;
+}
+
+
+/*
+ * Checks whether the Camera is ready
+ */
+static int mdc800_isReady (char *ch)
+{
+	int i=0;
+	while (i<8)
+	{
+		if (ch [i] != (char)0xbb)
+			return 0;
+		i++;
+	}
+	return 1;
+}
+
+
+
+/*
+ * USB IRQ Handler for InputLine
+ */
+static void mdc800_usb_irq (struct urb *urb)
+{
+	int data_received=0, wake_up;
+	unsigned char* b=urb->transfer_buffer;
+	struct mdc800_data* mdc800=urb->context;
+	struct device *dev = &mdc800->dev->dev;
+	int status = urb->status;
+
+	if (status >= 0) {
+		if (mdc800_isBusy (b))
+		{
+			if (!mdc800->camera_busy)
+			{
+				mdc800->camera_busy=1;
+				dev_dbg(dev, "gets busy\n");
+			}
+		}
+		else
+		{
+			if (mdc800->camera_busy && mdc800_isReady (b))
+			{
+				mdc800->camera_busy=0;
+				dev_dbg(dev, "gets ready\n");
+			}
+		}
+		if (!(mdc800_isBusy (b) || mdc800_isReady (b)))
+		{
+			/* Store Data in camera_answer field */
+			dev_dbg(dev, "%i %i %i %i %i %i %i %i \n",b[0],b[1],b[2],b[3],b[4],b[5],b[6],b[7]);
+
+			memcpy (mdc800->camera_response,b,8);
+			data_received=1;
+		}
+	}
+	wake_up= ( mdc800->camera_request_ready > 0 )
+		&&
+		(
+			((mdc800->camera_request_ready == 1) && (!mdc800->camera_busy))
+		||
+			((mdc800->camera_request_ready == 2) && data_received)
+		||
+			((mdc800->camera_request_ready == 3) && (mdc800->camera_busy))
+		||
+			(status < 0)
+		);
+
+	if (wake_up)
+	{
+		mdc800->camera_request_ready=0;
+		mdc800->irq_woken=1;
+		wake_up (&mdc800->irq_wait);
+	}
+}
+
+
+/*
+ * Waits a while until the irq responds that camera is ready
+ *
+ *  mode : 0: Wait for camera gets ready
+ *         1: Wait for receiving data
+ *         2: Wait for camera gets busy
+ *
+ * msec: Time to wait
+ */
+static int mdc800_usb_waitForIRQ (int mode, int msec)
+{
+	mdc800->camera_request_ready=1+mode;
+
+	wait_event_timeout(mdc800->irq_wait, mdc800->irq_woken,
+			   msecs_to_jiffies(msec));
+	mdc800->irq_woken = 0;
+
+	if (mdc800->camera_request_ready>0)
+	{
+		mdc800->camera_request_ready=0;
+		dev_err(&mdc800->dev->dev, "timeout waiting for camera.\n");
+		return -1;
+	}
+	
+	if (mdc800->state == NOT_CONNECTED)
+	{
+		printk(KERN_WARNING "mdc800: Camera gets disconnected "
+		       "during waiting for irq.\n");
+		mdc800->camera_request_ready=0;
+		return -2;
+	}
+	
+	return 0;
+}
+
+
+/*
+ * The write_urb callback function
+ */
+static void mdc800_usb_write_notify (struct urb *urb)
+{
+	struct mdc800_data* mdc800=urb->context;
+	int status = urb->status;
+
+	if (status != 0)
+		dev_err(&mdc800->dev->dev,
+			"writing command fails (status=%i)\n", status);
+	else
+		mdc800->state=READY;
+	mdc800->written = 1;
+	wake_up (&mdc800->write_wait);
+}
+
+
+/*
+ * The download_urb callback function
+ */
+static void mdc800_usb_download_notify (struct urb *urb)
+{
+	struct mdc800_data* mdc800=urb->context;
+	int status = urb->status;
+
+	if (status == 0) {
+		/* Fill output buffer with these data */
+		memcpy (mdc800->out,  urb->transfer_buffer, 64);
+		mdc800->out_count=64;
+		mdc800->out_ptr=0;
+		mdc800->download_left-=64;
+		if (mdc800->download_left == 0)
+		{
+			mdc800->state=READY;
+		}
+	} else {
+		dev_err(&mdc800->dev->dev,
+			"request bytes fails (status:%i)\n", status);
+	}
+	mdc800->downloaded = 1;
+	wake_up (&mdc800->download_wait);
+}
+
+
+/***************************************************************************
+	Probing for the Camera
+ ***************************************************************************/
+
+static struct usb_driver mdc800_usb_driver;
+static const struct file_operations mdc800_device_ops;
+static struct usb_class_driver mdc800_class = {
+	.name =		"mdc800%d",
+	.fops =		&mdc800_device_ops,
+	.minor_base =	MDC800_DEVICE_MINOR_BASE,
+};
+
+
+/*
+ * Callback to search the Mustek MDC800 on the USB Bus
+ */
+static int mdc800_usb_probe (struct usb_interface *intf,
+			       const struct usb_device_id *id)
+{
+	int i,j;
+	struct usb_host_interface *intf_desc;
+	struct usb_device *dev = interface_to_usbdev (intf);
+	int irq_interval=0;
+	int retval;
+
+	dev_dbg(&intf->dev, "(%s) called.\n", __func__);
+
+
+	if (mdc800->dev != NULL)
+	{
+		dev_warn(&intf->dev, "only one Mustek MDC800 is supported.\n");
+		return -ENODEV;
+	}
+
+	if (dev->descriptor.bNumConfigurations != 1)
+	{
+		dev_err(&intf->dev,
+			"probe fails -> wrong Number of Configuration\n");
+		return -ENODEV;
+	}
+	intf_desc = intf->cur_altsetting;
+
+	if (
+			( intf_desc->desc.bInterfaceClass != 0xff )
+		||	( intf_desc->desc.bInterfaceSubClass != 0 )
+		|| ( intf_desc->desc.bInterfaceProtocol != 0 )
+		|| ( intf_desc->desc.bNumEndpoints != 4)
+	)
+	{
+		dev_err(&intf->dev, "probe fails -> wrong Interface\n");
+		return -ENODEV;
+	}
+
+	/* Check the Endpoints */
+	for (i=0; i<4; i++)
+	{
+		mdc800->endpoint[i]=-1;
+		for (j=0; j<4; j++)
+		{
+			if (mdc800_endpoint_equals (&intf_desc->endpoint [j].desc,&mdc800_ed [i]))
+			{
+				mdc800->endpoint[i]=intf_desc->endpoint [j].desc.bEndpointAddress ;
+				if (i==1)
+				{
+					irq_interval=intf_desc->endpoint [j].desc.bInterval;
+				}
+			}
+		}
+		if (mdc800->endpoint[i] == -1)
+		{
+			dev_err(&intf->dev, "probe fails -> Wrong Endpoints.\n");
+			return -ENODEV;
+		}
+	}
+
+
+	dev_info(&intf->dev, "Found Mustek MDC800 on USB.\n");
+
+	mutex_lock(&mdc800->io_lock);
+
+	retval = usb_register_dev(intf, &mdc800_class);
+	if (retval) {
+		dev_err(&intf->dev, "Not able to get a minor for this device.\n");
+		mutex_unlock(&mdc800->io_lock);
+		return -ENODEV;
+	}
+
+	mdc800->dev=dev;
+	mdc800->open=0;
+
+	/* Setup URB Structs */
+	usb_fill_int_urb (
+		mdc800->irq_urb,
+		mdc800->dev,
+		usb_rcvintpipe (mdc800->dev,mdc800->endpoint [1]),
+		mdc800->irq_urb_buffer,
+		8,
+		mdc800_usb_irq,
+		mdc800,
+		irq_interval
+	);
+
+	usb_fill_bulk_urb (
+		mdc800->write_urb,
+		mdc800->dev,
+		usb_sndbulkpipe (mdc800->dev, mdc800->endpoint[0]),
+		mdc800->write_urb_buffer,
+		8,
+		mdc800_usb_write_notify,
+		mdc800
+	);
+
+	usb_fill_bulk_urb (
+		mdc800->download_urb,
+		mdc800->dev,
+		usb_rcvbulkpipe (mdc800->dev, mdc800->endpoint [3]),
+		mdc800->download_urb_buffer,
+		64,
+		mdc800_usb_download_notify,
+		mdc800
+	);
+
+	mdc800->state=READY;
+
+	mutex_unlock(&mdc800->io_lock);
+	
+	usb_set_intfdata(intf, mdc800);
+	return 0;
+}
+
+
+/*
+ * Disconnect USB device (maybe the MDC800)
+ */
+static void mdc800_usb_disconnect (struct usb_interface *intf)
+{
+	struct mdc800_data* mdc800 = usb_get_intfdata(intf);
+
+	dev_dbg(&intf->dev, "(%s) called\n", __func__);
+
+	if (mdc800) {
+		if (mdc800->state == NOT_CONNECTED)
+			return;
+
+		usb_deregister_dev(intf, &mdc800_class);
+
+		/* must be under lock to make sure no URB
+		   is submitted after usb_kill_urb() */
+		mutex_lock(&mdc800->io_lock);
+		mdc800->state=NOT_CONNECTED;
+
+		usb_kill_urb(mdc800->irq_urb);
+		usb_kill_urb(mdc800->write_urb);
+		usb_kill_urb(mdc800->download_urb);
+		mutex_unlock(&mdc800->io_lock);
+
+		mdc800->dev = NULL;
+		usb_set_intfdata(intf, NULL);
+	}
+	dev_info(&intf->dev, "Mustek MDC800 disconnected from USB.\n");
+}
+
+
+/***************************************************************************
+	The Misc device Part (file_operations)
+****************************************************************************/
+
+/*
+ * This Function calc the Answersize for a command.
+ */
+static int mdc800_getAnswerSize (char command)
+{
+	switch ((unsigned char) command)
+	{
+		case 0x2a:
+		case 0x49:
+		case 0x51:
+		case 0x0d:
+		case 0x20:
+		case 0x07:
+		case 0x01:
+		case 0x25:
+		case 0x00:
+			return 8;
+
+		case 0x05:
+		case 0x3e:
+			return mdc800->pic_len;
+
+		case 0x09:
+			return 4096;
+
+		default:
+			return 0;
+	}
+}
+
+
+/*
+ * Init the device: (1) alloc mem (2) Increase MOD Count ..
+ */
+static int mdc800_device_open (struct inode* inode, struct file *file)
+{
+	int retval=0;
+	int errn=0;
+
+	mutex_lock(&mdc800->io_lock);
+	
+	if (mdc800->state == NOT_CONNECTED)
+	{
+		errn=-EBUSY;
+		goto error_out;
+	}
+	if (mdc800->open)
+	{
+		errn=-EBUSY;
+		goto error_out;
+	}
+
+	mdc800->in_count=0;
+	mdc800->out_count=0;
+	mdc800->out_ptr=0;
+	mdc800->pic_index=0;
+	mdc800->pic_len=-1;
+	mdc800->download_left=0;
+
+	mdc800->camera_busy=0;
+	mdc800->camera_request_ready=0;
+
+	retval=0;
+	mdc800->irq_urb->dev = mdc800->dev;
+	retval = usb_submit_urb (mdc800->irq_urb, GFP_KERNEL);
+	if (retval) {
+		dev_err(&mdc800->dev->dev,
+			"request USB irq fails (submit_retval=%i).\n", retval);
+		errn = -EIO;
+		goto error_out;
+	}
+
+	mdc800->open=1;
+	dev_dbg(&mdc800->dev->dev, "Mustek MDC800 device opened.\n");
+
+error_out:
+	mutex_unlock(&mdc800->io_lock);
+	return errn;
+}
+
+
+/*
+ * Close the Camera and release Memory
+ */
+static int mdc800_device_release (struct inode* inode, struct file *file)
+{
+	int retval=0;
+
+	mutex_lock(&mdc800->io_lock);
+	if (mdc800->open && (mdc800->state != NOT_CONNECTED))
+	{
+		usb_kill_urb(mdc800->irq_urb);
+		usb_kill_urb(mdc800->write_urb);
+		usb_kill_urb(mdc800->download_urb);
+		mdc800->open=0;
+	}
+	else
+	{
+		retval=-EIO;
+	}
+
+	mutex_unlock(&mdc800->io_lock);
+	return retval;
+}
+
+
+/*
+ * The Device read callback Function
+ */
+static ssize_t mdc800_device_read (struct file *file, char __user *buf, size_t len, loff_t *pos)
+{
+	size_t left=len, sts=len; /* single transfer size */
+	char __user *ptr = buf;
+	int retval;
+
+	mutex_lock(&mdc800->io_lock);
+	if (mdc800->state == NOT_CONNECTED)
+	{
+		mutex_unlock(&mdc800->io_lock);
+		return -EBUSY;
+	}
+	if (mdc800->state == WORKING)
+	{
+		printk(KERN_WARNING "mdc800: Illegal State \"working\""
+		       "reached during read ?!\n");
+		mutex_unlock(&mdc800->io_lock);
+		return -EBUSY;
+	}
+	if (!mdc800->open)
+	{
+		mutex_unlock(&mdc800->io_lock);
+		return -EBUSY;
+	}
+
+	while (left)
+	{
+		if (signal_pending (current)) 
+		{
+			mutex_unlock(&mdc800->io_lock);
+			return -EINTR;
+		}
+
+		sts=left > (mdc800->out_count-mdc800->out_ptr)?mdc800->out_count-mdc800->out_ptr:left;
+
+		if (sts <= 0)
+		{
+			/* Too less Data in buffer */
+			if (mdc800->state == DOWNLOAD)
+			{
+				mdc800->out_count=0;
+				mdc800->out_ptr=0;
+
+				/* Download -> Request new bytes */
+				mdc800->download_urb->dev = mdc800->dev;
+				retval = usb_submit_urb (mdc800->download_urb, GFP_KERNEL);
+				if (retval) {
+					dev_err(&mdc800->dev->dev,
+						"Can't submit download urb "
+						"(retval=%i)\n", retval);
+					mutex_unlock(&mdc800->io_lock);
+					return len-left;
+				}
+				wait_event_timeout(mdc800->download_wait,
+				     mdc800->downloaded,
+				     msecs_to_jiffies(TO_DOWNLOAD_GET_READY));
+				mdc800->downloaded = 0;
+				if (mdc800->download_urb->status != 0)
+				{
+					dev_err(&mdc800->dev->dev,
+						"request download-bytes fails "
+						"(status=%i)\n",
+						mdc800->download_urb->status);
+					mutex_unlock(&mdc800->io_lock);
+					return len-left;
+				}
+			}
+			else
+			{
+				/* No more bytes -> that's an error*/
+				mutex_unlock(&mdc800->io_lock);
+				return -EIO;
+			}
+		}
+		else
+		{
+			/* Copy Bytes */
+			if (copy_to_user(ptr, &mdc800->out [mdc800->out_ptr],
+						sts)) {
+				mutex_unlock(&mdc800->io_lock);
+				return -EFAULT;
+			}
+			ptr+=sts;
+			left-=sts;
+			mdc800->out_ptr+=sts;
+		}
+	}
+
+	mutex_unlock(&mdc800->io_lock);
+	return len-left;
+}
+
+
+/*
+ * The Device write callback Function
+ * If a 8Byte Command is received, it will be send to the camera.
+ * After this the driver initiates the request for the answer or
+ * just waits until the camera becomes ready.
+ */
+static ssize_t mdc800_device_write (struct file *file, const char __user *buf, size_t len, loff_t *pos)
+{
+	size_t i=0;
+	int retval;
+
+	mutex_lock(&mdc800->io_lock);
+	if (mdc800->state != READY)
+	{
+		mutex_unlock(&mdc800->io_lock);
+		return -EBUSY;
+	}
+	if (!mdc800->open )
+	{
+		mutex_unlock(&mdc800->io_lock);
+		return -EBUSY;
+	}
+
+	while (i<len)
+	{
+		unsigned char c;
+		if (signal_pending (current)) 
+		{
+			mutex_unlock(&mdc800->io_lock);
+			return -EINTR;
+		}
+		
+		if(get_user(c, buf+i))
+		{
+			mutex_unlock(&mdc800->io_lock);
+			return -EFAULT;
+		}
+
+		/* check for command start */
+		if (c == 0x55)
+		{
+			mdc800->in_count=0;
+			mdc800->out_count=0;
+			mdc800->out_ptr=0;
+			mdc800->download_left=0;
+		}
+
+		/* save command byte */
+		if (mdc800->in_count < 8)
+		{
+			mdc800->in[mdc800->in_count] = c;
+			mdc800->in_count++;
+		}
+		else
+		{
+			mutex_unlock(&mdc800->io_lock);
+			return -EIO;
+		}
+
+		/* Command Buffer full ? -> send it to camera */
+		if (mdc800->in_count == 8)
+		{
+			int answersize;
+
+			if (mdc800_usb_waitForIRQ (0,TO_GET_READY))
+			{
+				dev_err(&mdc800->dev->dev,
+					"Camera didn't get ready.\n");
+				mutex_unlock(&mdc800->io_lock);
+				return -EIO;
+			}
+
+			answersize=mdc800_getAnswerSize (mdc800->in[1]);
+
+			mdc800->state=WORKING;
+			memcpy (mdc800->write_urb->transfer_buffer, mdc800->in,8);
+			mdc800->write_urb->dev = mdc800->dev;
+			retval = usb_submit_urb (mdc800->write_urb, GFP_KERNEL);
+			if (retval) {
+				dev_err(&mdc800->dev->dev,
+					"submitting write urb fails "
+					"(retval=%i)\n", retval);
+				mutex_unlock(&mdc800->io_lock);
+				return -EIO;
+			}
+			wait_event_timeout(mdc800->write_wait, mdc800->written,
+					msecs_to_jiffies(TO_WRITE_GET_READY));
+			mdc800->written = 0;
+			if (mdc800->state == WORKING)
+			{
+				usb_kill_urb(mdc800->write_urb);
+				mutex_unlock(&mdc800->io_lock);
+				return -EIO;
+			}
+
+			switch ((unsigned char) mdc800->in[1])
+			{
+				case 0x05: /* Download Image */
+				case 0x3e: /* Take shot in Fine Mode (WCam Mode) */
+					if (mdc800->pic_len < 0)
+					{
+						dev_err(&mdc800->dev->dev,
+							"call 0x07 before "
+							"0x05,0x3e\n");
+						mdc800->state=READY;
+						mutex_unlock(&mdc800->io_lock);
+						return -EIO;
+					}
+					mdc800->pic_len=-1;
+					fallthrough;
+
+				case 0x09: /* Download Thumbnail */
+					mdc800->download_left=answersize+64;
+					mdc800->state=DOWNLOAD;
+					mdc800_usb_waitForIRQ (0,TO_DOWNLOAD_GET_BUSY);
+					break;
+
+
+				default:
+					if (answersize)
+					{
+
+						if (mdc800_usb_waitForIRQ (1,TO_READ_FROM_IRQ))
+						{
+							dev_err(&mdc800->dev->dev, "requesting answer from irq fails\n");
+							mutex_unlock(&mdc800->io_lock);
+							return -EIO;
+						}
+
+						/* Write dummy data, (this is ugly but part of the USB Protocol */
+						/* if you use endpoint 1 as bulk and not as irq) */
+						memcpy (mdc800->out, mdc800->camera_response,8);
+
+						/* This is the interpreted answer */
+						memcpy (&mdc800->out[8], mdc800->camera_response,8);
+
+						mdc800->out_ptr=0;
+						mdc800->out_count=16;
+
+						/* Cache the Imagesize, if command was getImageSize */
+						if (mdc800->in [1] == (char) 0x07)
+						{
+							mdc800->pic_len=(int) 65536*(unsigned char) mdc800->camera_response[0]+256*(unsigned char) mdc800->camera_response[1]+(unsigned char) mdc800->camera_response[2];
+
+							dev_dbg(&mdc800->dev->dev, "cached imagesize = %i\n", mdc800->pic_len);
+						}
+
+					}
+					else
+					{
+						if (mdc800_usb_waitForIRQ (0,TO_DEFAULT_COMMAND))
+						{
+							dev_err(&mdc800->dev->dev, "Command Timeout.\n");
+							mutex_unlock(&mdc800->io_lock);
+							return -EIO;
+						}
+					}
+					mdc800->state=READY;
+					break;
+			}
+		}
+		i++;
+	}
+	mutex_unlock(&mdc800->io_lock);
+	return i;
+}
+
+
+/***************************************************************************
+	Init and Cleanup this driver (Structs and types)
+****************************************************************************/
+
+/* File Operations of this drivers */
+static const struct file_operations mdc800_device_ops =
+{
+	.owner =	THIS_MODULE,
+	.read =		mdc800_device_read,
+	.write =	mdc800_device_write,
+	.open =		mdc800_device_open,
+	.release =	mdc800_device_release,
+	.llseek =	noop_llseek,
+};
+
+
+
+static const struct usb_device_id mdc800_table[] = {
+	{ USB_DEVICE(MDC800_VENDOR_ID, MDC800_PRODUCT_ID) },
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, mdc800_table);
+/*
+ * USB Driver Struct for this device
+ */
+static struct usb_driver mdc800_usb_driver =
+{
+	.name =		"mdc800",
+	.probe =	mdc800_usb_probe,
+	.disconnect =	mdc800_usb_disconnect,
+	.id_table =	mdc800_table
+};
+
+
+
+/************************************************************************
+	Init and Cleanup this driver (Main Functions)
+*************************************************************************/
+
+static int __init usb_mdc800_init (void)
+{
+	int retval = -ENODEV;
+	/* Allocate Memory */
+	mdc800=kzalloc (sizeof (struct mdc800_data), GFP_KERNEL);
+	if (!mdc800)
+		goto cleanup_on_fail;
+
+	mdc800->dev = NULL;
+	mdc800->state=NOT_CONNECTED;
+	mutex_init (&mdc800->io_lock);
+
+	init_waitqueue_head (&mdc800->irq_wait);
+	init_waitqueue_head (&mdc800->write_wait);
+	init_waitqueue_head (&mdc800->download_wait);
+
+	mdc800->irq_woken = 0;
+	mdc800->downloaded = 0;
+	mdc800->written = 0;
+
+	mdc800->irq_urb_buffer=kmalloc (8, GFP_KERNEL);
+	if (!mdc800->irq_urb_buffer)
+		goto cleanup_on_fail;
+	mdc800->write_urb_buffer=kmalloc (8, GFP_KERNEL);
+	if (!mdc800->write_urb_buffer)
+		goto cleanup_on_fail;
+	mdc800->download_urb_buffer=kmalloc (64, GFP_KERNEL);
+	if (!mdc800->download_urb_buffer)
+		goto cleanup_on_fail;
+
+	mdc800->irq_urb=usb_alloc_urb (0, GFP_KERNEL);
+	if (!mdc800->irq_urb)
+		goto cleanup_on_fail;
+	mdc800->download_urb=usb_alloc_urb (0, GFP_KERNEL);
+	if (!mdc800->download_urb)
+		goto cleanup_on_fail;
+	mdc800->write_urb=usb_alloc_urb (0, GFP_KERNEL);
+	if (!mdc800->write_urb)
+		goto cleanup_on_fail;
+
+	/* Register the driver */
+	retval = usb_register(&mdc800_usb_driver);
+	if (retval)
+		goto cleanup_on_fail;
+
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
+
+	return 0;
+
+	/* Clean driver up, when something fails */
+
+cleanup_on_fail:
+
+	if (mdc800 != NULL)
+	{
+		printk(KERN_ERR "mdc800: can't alloc memory!\n");
+
+		kfree(mdc800->download_urb_buffer);
+		kfree(mdc800->write_urb_buffer);
+		kfree(mdc800->irq_urb_buffer);
+
+		usb_free_urb(mdc800->write_urb);
+		usb_free_urb(mdc800->download_urb);
+		usb_free_urb(mdc800->irq_urb);
+
+		kfree (mdc800);
+	}
+	mdc800 = NULL;
+	return retval;
+}
+
+
+static void __exit usb_mdc800_cleanup (void)
+{
+	usb_deregister (&mdc800_usb_driver);
+
+	usb_free_urb (mdc800->irq_urb);
+	usb_free_urb (mdc800->download_urb);
+	usb_free_urb (mdc800->write_urb);
+
+	kfree (mdc800->irq_urb_buffer);
+	kfree (mdc800->write_urb_buffer);
+	kfree (mdc800->download_urb_buffer);
+
+	kfree (mdc800);
+	mdc800 = NULL;
+}
+
+module_init (usb_mdc800_init);
+module_exit (usb_mdc800_cleanup);
+
+MODULE_AUTHOR( DRIVER_AUTHOR );
+MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
new file mode 100644
index 000000000..874ea4b54
--- /dev/null
+++ b/drivers/usb/image/microtek.c
@@ -0,0 +1,810 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Driver for Microtek Scanmaker X6 USB scanner, and possibly others.
+ *
+ * (C) Copyright 2000 John Fremlin <vii@penguinpowered.com>
+ * (C) Copyright 2000 Oliver Neukum <Oliver.Neukum@lrz.uni-muenchen.de>
+ *
+ * Parts shamelessly stolen from usb-storage and copyright by their
+ * authors. Thanks to Matt Dharm for giving us permission!
+ *
+ * This driver implements a SCSI host controller driver and a USB
+ * device driver. To avoid confusion, all the USB related stuff is
+ * prefixed by mts_usb_ and all the SCSI stuff by mts_scsi_.
+ *
+ * Microtek (www.microtek.com) did not release the specifications for
+ * their USB protocol to us, so we had to reverse engineer them. We
+ * don't know for which models they are valid.
+ *
+ * The X6 USB has three bulk endpoints, one output (0x1) down which
+ * commands and outgoing data are sent, and two input: 0x82 from which
+ * normal data is read from the scanner (in packets of maximum 32
+ * bytes) and from which the status byte is read, and 0x83 from which
+ * the results of a scan (or preview) are read in up to 64 * 1024 byte
+ * chunks by the Windows driver. We don't know how much it is possible
+ * to read at a time from 0x83.
+ *
+ * It seems possible to read (with URB transfers) everything from 0x82
+ * in one go, without bothering to read in 32 byte chunks.
+ *
+ * There seems to be an optimisation of a further READ implicit if
+ * you simply read from 0x83.
+ *
+ * Guessed protocol:
+ *
+ *	Send raw SCSI command to EP 0x1
+ *
+ *	If there is data to receive:
+ *		If the command was READ datatype=image:
+ *			Read a lot of data from EP 0x83
+ *		Else:
+ *			Read data from EP 0x82
+ *	Else:
+ *		If there is data to transmit:
+ *			Write it to EP 0x1
+ *
+ *	Read status byte from EP 0x82
+ *
+ * References:
+ *
+ * The SCSI command set for the scanner is available from
+ *	ftp://ftp.microtek.com/microtek/devpack/
+ *
+ * Microtek NV sent us a more up to date version of the document. If
+ * you want it, just send mail.
+ *
+ * Status:
+ *
+ *	Untested with multiple scanners.
+ *	Untested on SMP.
+ *	Untested on a bigendian machine.
+ *
+ * History:
+ *
+ *	20000417 starting history
+ *	20000417 fixed load oops
+ *	20000417 fixed unload oops
+ *	20000419 fixed READ IMAGE detection
+ *	20000424 started conversion to use URBs
+ *	20000502 handled short transfers as errors
+ *	20000513 rename and organisation of functions (john)
+ *	20000513 added IDs for all products supported by Windows driver (john)
+ *	20000514 Rewrote mts_scsi_queuecommand to use URBs (john)
+ *	20000514 Version 0.0.8j
+ *      20000514 Fix reporting of non-existent devices to SCSI layer (john)
+ *	20000514 Added MTS_DEBUG_INT (john)
+ *	20000514 Changed "usb-microtek" to "microtek" for consistency (john)
+ *	20000514 Stupid bug fixes (john)
+ *	20000514 Version 0.0.9j
+ *	20000515 Put transfer context and URB in mts_desc (john)
+ *	20000515 Added prelim turn off debugging support (john)
+ *	20000515 Version 0.0.10j
+ *      20000515 Fixed up URB allocation (clear URB on alloc) (john)
+ *      20000515 Version 0.0.11j
+ *	20000516 Removed unnecessary spinlock in mts_transfer_context (john)
+ *	20000516 Removed unnecessary up on instance lock in mts_remove_nolock (john)
+ *	20000516 Implemented (badly) scsi_abort (john)
+ *	20000516 Version 0.0.12j
+ *      20000517 Hopefully removed mts_remove_nolock quasideadlock (john)
+ *      20000517 Added mts_debug_dump to print ll USB info (john)
+ *	20000518 Tweaks and documentation updates (john)
+ *	20000518 Version 0.0.13j
+ *	20000518 Cleaned up abort handling (john)
+ *	20000523 Removed scsi_command and various scsi_..._resets (john)
+ *	20000523 Added unlink URB on scsi_abort, now OHCI supports it (john)
+ *	20000523 Fixed last tiresome compile warning (john)
+ *	20000523 Version 0.0.14j (though version 0.1 has come out?)
+ *	20000602 Added primitive reset
+ *	20000602 Version 0.2.0
+ *	20000603 various cosmetic changes
+ *	20000603 Version 0.2.1
+ *	20000620 minor cosmetic changes
+ *	20000620 Version 0.2.2
+ *	20000822 Hopefully fixed deadlock in mts_remove_nolock()
+ *	20000822 Fixed minor race in mts_transfer_cleanup()
+ *	20000822 Fixed deadlock on submission error in queuecommand
+ *	20000822 Version 0.2.3
+ *	20000913 Reduced module size if debugging is off
+ *	20000913 Version 0.2.4
+ *      20010210 New abort logic
+ *      20010210 Version 0.3.0
+ *	20010217 Merged scatter/gather
+ *	20010218 Version 0.4.0
+ *	20010218 Cosmetic fixes
+ *	20010218 Version 0.4.1
+ *      20010306 Abort while using scatter/gather
+ *      20010306 Version 0.4.2
+ *      20010311 Remove all timeouts and tidy up generally (john)
+ *	20010320 check return value of scsi_register()
+ *	20010320 Version 0.4.3
+ *	20010408 Identify version on module load.
+ *	20011003 Fix multiple requests
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/random.h>
+#include <linux/poll.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/proc_fs.h>
+#include <linux/atomic.h>
+#include <linux/blkdev.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+
+#include "microtek.h"
+
+#define DRIVER_AUTHOR "John Fremlin <vii@penguinpowered.com>, Oliver Neukum <Oliver.Neukum@lrz.uni-muenchen.de>"
+#define DRIVER_DESC "Microtek Scanmaker X6 USB scanner driver"
+
+/* Should we do debugging? */
+
+//#define MTS_DO_DEBUG
+
+/* USB layer driver interface */
+
+static int mts_usb_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id);
+static void mts_usb_disconnect(struct usb_interface *intf);
+
+static const struct usb_device_id mts_usb_ids[];
+
+static struct usb_driver mts_usb_driver = {
+	.name =		"microtekX6",
+	.probe =	mts_usb_probe,
+	.disconnect =	mts_usb_disconnect,
+	.id_table =	mts_usb_ids,
+};
+
+
+/* Internal driver stuff */
+
+#define MTS_VERSION	"0.4.3"
+#define MTS_NAME	"microtek usb (rev " MTS_VERSION "): "
+
+#define MTS_WARNING(x...) \
+	printk( KERN_WARNING MTS_NAME x )
+#define MTS_ERROR(x...) \
+	printk( KERN_ERR MTS_NAME x )
+#define MTS_INT_ERROR(x...) \
+	MTS_ERROR(x)
+#define MTS_MESSAGE(x...) \
+	printk( KERN_INFO MTS_NAME x )
+
+#if defined MTS_DO_DEBUG
+
+#define MTS_DEBUG(x...) \
+	printk( KERN_DEBUG MTS_NAME x )
+
+#define MTS_DEBUG_GOT_HERE() \
+	MTS_DEBUG("got to %s:%d (%s)\n", __FILE__, (int)__LINE__, __func__ )
+#define MTS_DEBUG_INT() \
+	do { MTS_DEBUG_GOT_HERE(); \
+	     MTS_DEBUG("transfer = 0x%x context = 0x%x\n",(int)transfer,(int)context ); \
+	     MTS_DEBUG("status = 0x%x data-length = 0x%x sent = 0x%x\n",transfer->status,(int)context->data_length, (int)transfer->actual_length ); \
+             mts_debug_dump(context->instance);\
+	   } while(0)
+#else
+
+#define MTS_NUL_STATEMENT do { } while(0)
+
+#define MTS_DEBUG(x...)	MTS_NUL_STATEMENT
+#define MTS_DEBUG_GOT_HERE() MTS_NUL_STATEMENT
+#define MTS_DEBUG_INT() MTS_NUL_STATEMENT
+
+#endif
+
+
+
+#define MTS_INT_INIT()\
+	struct mts_transfer_context* context = (struct mts_transfer_context*)transfer->context; \
+	MTS_DEBUG_INT();\
+
+#ifdef MTS_DO_DEBUG
+
+static inline void mts_debug_dump(struct mts_desc* desc) {
+	MTS_DEBUG("desc at 0x%x: toggle = %02x%02x\n",
+		  (int)desc,
+		  (int)desc->usb_dev->toggle[1],(int)desc->usb_dev->toggle[0]
+		);
+	MTS_DEBUG("ep_out=%x ep_response=%x ep_image=%x\n",
+		  usb_sndbulkpipe(desc->usb_dev,desc->ep_out),
+		  usb_rcvbulkpipe(desc->usb_dev,desc->ep_response),
+		  usb_rcvbulkpipe(desc->usb_dev,desc->ep_image)
+		);
+}
+
+
+static inline void mts_show_command(struct scsi_cmnd *srb)
+{
+	char *what = NULL;
+
+	switch (srb->cmnd[0]) {
+	case TEST_UNIT_READY: what = "TEST_UNIT_READY"; break;
+	case REZERO_UNIT: what = "REZERO_UNIT"; break;
+	case REQUEST_SENSE: what = "REQUEST_SENSE"; break;
+	case FORMAT_UNIT: what = "FORMAT_UNIT"; break;
+	case READ_BLOCK_LIMITS: what = "READ_BLOCK_LIMITS"; break;
+	case REASSIGN_BLOCKS: what = "REASSIGN_BLOCKS"; break;
+	case READ_6: what = "READ_6"; break;
+	case WRITE_6: what = "WRITE_6"; break;
+	case SEEK_6: what = "SEEK_6"; break;
+	case READ_REVERSE: what = "READ_REVERSE"; break;
+	case WRITE_FILEMARKS: what = "WRITE_FILEMARKS"; break;
+	case SPACE: what = "SPACE"; break;
+	case INQUIRY: what = "INQUIRY"; break;
+	case RECOVER_BUFFERED_DATA: what = "RECOVER_BUFFERED_DATA"; break;
+	case MODE_SELECT: what = "MODE_SELECT"; break;
+	case RESERVE: what = "RESERVE"; break;
+	case RELEASE: what = "RELEASE"; break;
+	case COPY: what = "COPY"; break;
+	case ERASE: what = "ERASE"; break;
+	case MODE_SENSE: what = "MODE_SENSE"; break;
+	case START_STOP: what = "START_STOP"; break;
+	case RECEIVE_DIAGNOSTIC: what = "RECEIVE_DIAGNOSTIC"; break;
+	case SEND_DIAGNOSTIC: what = "SEND_DIAGNOSTIC"; break;
+	case ALLOW_MEDIUM_REMOVAL: what = "ALLOW_MEDIUM_REMOVAL"; break;
+	case SET_WINDOW: what = "SET_WINDOW"; break;
+	case READ_CAPACITY: what = "READ_CAPACITY"; break;
+	case READ_10: what = "READ_10"; break;
+	case WRITE_10: what = "WRITE_10"; break;
+	case SEEK_10: what = "SEEK_10"; break;
+	case WRITE_VERIFY: what = "WRITE_VERIFY"; break;
+	case VERIFY: what = "VERIFY"; break;
+	case SEARCH_HIGH: what = "SEARCH_HIGH"; break;
+	case SEARCH_EQUAL: what = "SEARCH_EQUAL"; break;
+	case SEARCH_LOW: what = "SEARCH_LOW"; break;
+	case SET_LIMITS: what = "SET_LIMITS"; break;
+	case READ_POSITION: what = "READ_POSITION"; break;
+	case SYNCHRONIZE_CACHE: what = "SYNCHRONIZE_CACHE"; break;
+	case LOCK_UNLOCK_CACHE: what = "LOCK_UNLOCK_CACHE"; break;
+	case READ_DEFECT_DATA: what = "READ_DEFECT_DATA"; break;
+	case MEDIUM_SCAN: what = "MEDIUM_SCAN"; break;
+	case COMPARE: what = "COMPARE"; break;
+	case COPY_VERIFY: what = "COPY_VERIFY"; break;
+	case WRITE_BUFFER: what = "WRITE_BUFFER"; break;
+	case READ_BUFFER: what = "READ_BUFFER"; break;
+	case UPDATE_BLOCK: what = "UPDATE_BLOCK"; break;
+	case READ_LONG: what = "READ_LONG"; break;
+	case WRITE_LONG: what = "WRITE_LONG"; break;
+	case CHANGE_DEFINITION: what = "CHANGE_DEFINITION"; break;
+	case WRITE_SAME: what = "WRITE_SAME"; break;
+	case READ_TOC: what = "READ_TOC"; break;
+	case LOG_SELECT: what = "LOG_SELECT"; break;
+	case LOG_SENSE: what = "LOG_SENSE"; break;
+	case MODE_SELECT_10: what = "MODE_SELECT_10"; break;
+	case MODE_SENSE_10: what = "MODE_SENSE_10"; break;
+	case MOVE_MEDIUM: what = "MOVE_MEDIUM"; break;
+	case READ_12: what = "READ_12"; break;
+	case WRITE_12: what = "WRITE_12"; break;
+	case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break;
+	case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break;
+	case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break;
+	case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break;
+	case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break;
+	case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break;
+	case WRITE_LONG_2: what = "WRITE_LONG_2"; break;
+	default:
+		MTS_DEBUG("can't decode command\n");
+		goto out;
+		break;
+	}
+	MTS_DEBUG( "Command %s (%d bytes)\n", what, srb->cmd_len);
+
+ out:
+	MTS_DEBUG( "  %10ph\n", srb->cmnd);
+}
+
+#else
+
+static inline void mts_show_command(struct scsi_cmnd * dummy)
+{
+}
+
+static inline void mts_debug_dump(struct mts_desc* dummy)
+{
+}
+
+#endif
+
+static inline void mts_urb_abort(struct mts_desc* desc) {
+	MTS_DEBUG_GOT_HERE();
+	mts_debug_dump(desc);
+
+	usb_kill_urb( desc->urb );
+}
+
+static int mts_slave_alloc (struct scsi_device *s)
+{
+	s->inquiry_len = 0x24;
+	return 0;
+}
+
+static int mts_slave_configure (struct scsi_device *s)
+{
+	blk_queue_dma_alignment(s->request_queue, (512 - 1));
+	return 0;
+}
+
+static int mts_scsi_abort(struct scsi_cmnd *srb)
+{
+	struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
+
+	MTS_DEBUG_GOT_HERE();
+
+	mts_urb_abort(desc);
+
+	return FAILED;
+}
+
+static int mts_scsi_host_reset(struct scsi_cmnd *srb)
+{
+	struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
+	int result;
+
+	MTS_DEBUG_GOT_HERE();
+	mts_debug_dump(desc);
+
+	result = usb_lock_device_for_reset(desc->usb_dev, desc->usb_intf);
+	if (result == 0) {
+		result = usb_reset_device(desc->usb_dev);
+		usb_unlock_device(desc->usb_dev);
+	}
+	return result ? FAILED : SUCCESS;
+}
+
+static int
+mts_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *srb);
+
+static void mts_transfer_cleanup( struct urb *transfer );
+static void mts_do_sg(struct urb * transfer);
+
+static inline
+void mts_int_submit_urb (struct urb* transfer,
+			int pipe,
+			void* data,
+			unsigned length,
+			usb_complete_t callback )
+/* Interrupt context! */
+
+/* Holding transfer->context->lock! */
+{
+	int res;
+
+	MTS_INT_INIT();
+
+	usb_fill_bulk_urb(transfer,
+		      context->instance->usb_dev,
+		      pipe,
+		      data,
+		      length,
+		      callback,
+		      context
+		);
+
+	res = usb_submit_urb( transfer, GFP_ATOMIC );
+	if ( unlikely(res) ) {
+		MTS_INT_ERROR( "could not submit URB! Error was %d\n",(int)res );
+		set_host_byte(context->srb, DID_ERROR);
+		mts_transfer_cleanup(transfer);
+	}
+}
+
+
+static void mts_transfer_cleanup( struct urb *transfer )
+/* Interrupt context! */
+{
+	MTS_INT_INIT();
+
+	if ( likely(context->final_callback != NULL) )
+		context->final_callback(context->srb);
+}
+
+static void mts_transfer_done( struct urb *transfer )
+{
+	MTS_INT_INIT();
+
+	context->srb->result &= MTS_SCSI_ERR_MASK;
+	context->srb->result |= (unsigned)(*context->scsi_status)<<1;
+
+	mts_transfer_cleanup(transfer);
+}
+
+
+static void mts_get_status( struct urb *transfer )
+/* Interrupt context! */
+{
+	MTS_INT_INIT();
+
+	mts_int_submit_urb(transfer,
+			   usb_rcvbulkpipe(context->instance->usb_dev,
+					   context->instance->ep_response),
+			   context->scsi_status,
+			   1,
+			   mts_transfer_done );
+}
+
+static void mts_data_done( struct urb* transfer )
+/* Interrupt context! */
+{
+	int status = transfer->status;
+	MTS_INT_INIT();
+
+	if ( context->data_length != transfer->actual_length ) {
+		scsi_set_resid(context->srb, context->data_length -
+			       transfer->actual_length);
+	} else if ( unlikely(status) ) {
+		set_host_byte(context->srb, (status == -ENOENT ? DID_ABORT : DID_ERROR));
+	}
+
+	mts_get_status(transfer);
+}
+
+
+static void mts_command_done( struct urb *transfer )
+/* Interrupt context! */
+{
+	int status = transfer->status;
+	MTS_INT_INIT();
+
+	if ( unlikely(status) ) {
+	        if (status == -ENOENT) {
+		        /* We are being killed */
+			MTS_DEBUG_GOT_HERE();
+			set_host_byte(context->srb, DID_ABORT);
+                } else {
+		        /* A genuine error has occurred */
+			MTS_DEBUG_GOT_HERE();
+
+		        set_host_byte(context->srb, DID_ERROR);
+                }
+		mts_transfer_cleanup(transfer);
+
+		return;
+	}
+
+	if (context->srb->cmnd[0] == REQUEST_SENSE) {
+		mts_int_submit_urb(transfer,
+				   context->data_pipe,
+				   context->srb->sense_buffer,
+				   context->data_length,
+				   mts_data_done);
+	} else { if ( context->data ) {
+			mts_int_submit_urb(transfer,
+					   context->data_pipe,
+					   context->data,
+					   context->data_length,
+					   scsi_sg_count(context->srb) > 1 ?
+					           mts_do_sg : mts_data_done);
+		} else {
+			mts_get_status(transfer);
+		}
+	}
+}
+
+static void mts_do_sg (struct urb* transfer)
+{
+	int status = transfer->status;
+	MTS_INT_INIT();
+
+	MTS_DEBUG("Processing fragment %d of %d\n", context->fragment,
+	                                          scsi_sg_count(context->srb));
+
+	if (unlikely(status)) {
+                set_host_byte(context->srb, (status == -ENOENT ? DID_ABORT : DID_ERROR));
+		mts_transfer_cleanup(transfer);
+        }
+
+	context->curr_sg = sg_next(context->curr_sg);
+	mts_int_submit_urb(transfer,
+			   context->data_pipe,
+			   sg_virt(context->curr_sg),
+			   context->curr_sg->length,
+			   sg_is_last(context->curr_sg) ?
+			   mts_data_done : mts_do_sg);
+}
+
+static const u8 mts_read_image_sig[] = { 0x28, 00, 00, 00 };
+static const u8 mts_read_image_sig_len = 4;
+static const unsigned char mts_direction[256/8] = {
+	0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77,
+	0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+
+#define MTS_DIRECTION_IS_IN(x) ((mts_direction[x>>3] >> (x & 7)) & 1)
+
+static void
+mts_build_transfer_context(struct scsi_cmnd *srb, struct mts_desc* desc)
+{
+	int pipe;
+
+	MTS_DEBUG_GOT_HERE();
+
+	desc->context.instance = desc;
+	desc->context.srb = srb;
+
+	if (!scsi_bufflen(srb)) {
+		desc->context.data = NULL;
+		desc->context.data_length = 0;
+		return;
+	} else {
+		desc->context.curr_sg = scsi_sglist(srb);
+		desc->context.data = sg_virt(desc->context.curr_sg);
+		desc->context.data_length = desc->context.curr_sg->length;
+	}
+
+
+	/* can't rely on srb->sc_data_direction */
+
+	/* Brutally ripped from usb-storage */
+
+	if ( !memcmp( srb->cmnd, mts_read_image_sig, mts_read_image_sig_len )
+) { 		pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_image);
+		MTS_DEBUG( "transferring from desc->ep_image == %d\n",
+			   (int)desc->ep_image );
+	} else if ( MTS_DIRECTION_IS_IN(srb->cmnd[0]) ) {
+			pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_response);
+			MTS_DEBUG( "transferring from desc->ep_response == %d\n",
+				   (int)desc->ep_response);
+	} else {
+		MTS_DEBUG("transferring to desc->ep_out == %d\n",
+			  (int)desc->ep_out);
+		pipe = usb_sndbulkpipe(desc->usb_dev,desc->ep_out);
+	}
+	desc->context.data_pipe = pipe;
+}
+
+static int mts_scsi_queuecommand_lck(struct scsi_cmnd *srb)
+{
+	mts_scsi_cmnd_callback callback = scsi_done;
+	struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
+	int res;
+
+	MTS_DEBUG_GOT_HERE();
+	mts_show_command(srb);
+	mts_debug_dump(desc);
+
+	if ( srb->device->lun || srb->device->id || srb->device->channel ) {
+
+		MTS_DEBUG("Command to LUN=%d ID=%d CHANNEL=%d from SCSI layer\n",(int)srb->device->lun,(int)srb->device->id, (int)srb->device->channel );
+
+		MTS_DEBUG("this device doesn't exist\n");
+
+		set_host_byte(srb, DID_BAD_TARGET);
+
+		if(likely(callback != NULL))
+			callback(srb);
+
+		goto out;
+	}
+
+	
+	usb_fill_bulk_urb(desc->urb,
+		      desc->usb_dev,
+		      usb_sndbulkpipe(desc->usb_dev,desc->ep_out),
+		      srb->cmnd,
+		      srb->cmd_len,
+		      mts_command_done,
+		      &desc->context
+		      );
+
+
+	mts_build_transfer_context( srb, desc );
+	desc->context.final_callback = callback;
+	
+	/* here we need ATOMIC as we are called with the iolock */
+	res=usb_submit_urb(desc->urb, GFP_ATOMIC);
+
+	if(unlikely(res)){
+		MTS_ERROR("error %d submitting URB\n",(int)res);
+		set_host_byte(srb, DID_ERROR);
+
+		if(likely(callback != NULL))
+			callback(srb);
+
+	}
+out:
+	return 0;
+}
+
+static DEF_SCSI_QCMD(mts_scsi_queuecommand)
+
+static struct scsi_host_template mts_scsi_host_template = {
+	.module			= THIS_MODULE,
+	.name			= "microtekX6",
+	.proc_name		= "microtekX6",
+	.queuecommand		= mts_scsi_queuecommand,
+	.eh_abort_handler	= mts_scsi_abort,
+	.eh_host_reset_handler	= mts_scsi_host_reset,
+	.sg_tablesize =		SG_ALL,
+	.can_queue =		1,
+	.this_id =		-1,
+	.emulated =		1,
+	.slave_alloc =		mts_slave_alloc,
+	.slave_configure =	mts_slave_configure,
+	.max_sectors=		256, /* 128 K */
+};
+
+/* The entries of microtek_table must correspond, line-by-line to
+   the entries of mts_supported_products[]. */
+
+static const struct usb_device_id mts_usb_ids[] =
+{
+	{ USB_DEVICE(0x4ce, 0x0300) },
+	{ USB_DEVICE(0x5da, 0x0094) },
+	{ USB_DEVICE(0x5da, 0x0099) },
+	{ USB_DEVICE(0x5da, 0x009a) },
+	{ USB_DEVICE(0x5da, 0x00a0) },
+	{ USB_DEVICE(0x5da, 0x00a3) },
+	{ USB_DEVICE(0x5da, 0x80a3) },
+	{ USB_DEVICE(0x5da, 0x80ac) },
+	{ USB_DEVICE(0x5da, 0x00b6) },
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, mts_usb_ids);
+
+
+static int mts_usb_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	int i;
+	int ep_out = -1;
+	int ep_in_set[3]; /* this will break if we have more than three endpoints
+			   which is why we check */
+	int *ep_in_current = ep_in_set;
+	int err_retval = -ENOMEM;
+
+	struct mts_desc * new_desc;
+	struct usb_device *dev = interface_to_usbdev (intf);
+
+	/* the current altsetting on the interface we're probing */
+	struct usb_host_interface *altsetting;
+
+	MTS_DEBUG_GOT_HERE();
+	MTS_DEBUG( "usb-device descriptor at %x\n", (int)dev );
+
+	MTS_DEBUG( "product id = 0x%x, vendor id = 0x%x\n",
+		   le16_to_cpu(dev->descriptor.idProduct),
+		   le16_to_cpu(dev->descriptor.idVendor) );
+
+	MTS_DEBUG_GOT_HERE();
+
+	/* the current altsetting on the interface we're probing */
+	altsetting = intf->cur_altsetting;
+
+
+	/* Check if the config is sane */
+
+	if ( altsetting->desc.bNumEndpoints != MTS_EP_TOTAL ) {
+		MTS_WARNING( "expecting %d got %d endpoints! Bailing out.\n",
+			     (int)MTS_EP_TOTAL, (int)altsetting->desc.bNumEndpoints );
+		return -ENODEV;
+	}
+
+	for( i = 0; i < altsetting->desc.bNumEndpoints; i++ ) {
+		if ((altsetting->endpoint[i].desc.bmAttributes &
+		     USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) {
+
+			MTS_WARNING( "can only deal with bulk endpoints; endpoint %d is not bulk.\n",
+			     (int)altsetting->endpoint[i].desc.bEndpointAddress );
+		} else {
+			if (altsetting->endpoint[i].desc.bEndpointAddress &
+			    USB_DIR_IN)
+				*ep_in_current++
+					= altsetting->endpoint[i].desc.bEndpointAddress &
+					USB_ENDPOINT_NUMBER_MASK;
+			else {
+				if ( ep_out != -1 ) {
+					MTS_WARNING( "can only deal with one output endpoints. Bailing out." );
+					return -ENODEV;
+				}
+
+				ep_out = altsetting->endpoint[i].desc.bEndpointAddress &
+					USB_ENDPOINT_NUMBER_MASK;
+			}
+		}
+
+	}
+
+	if (ep_in_current != &ep_in_set[2]) {
+		MTS_WARNING("couldn't find two input bulk endpoints. Bailing out.\n");
+		return -ENODEV;
+	}
+
+	if ( ep_out == -1 ) {
+		MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" );
+		return -ENODEV;
+	}
+
+
+	new_desc = kzalloc(sizeof(struct mts_desc), GFP_KERNEL);
+	if (!new_desc)
+		goto out;
+
+	new_desc->urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!new_desc->urb)
+		goto out_kfree;
+
+	new_desc->context.scsi_status = kmalloc(1, GFP_KERNEL);
+	if (!new_desc->context.scsi_status)
+		goto out_free_urb;
+
+	new_desc->usb_dev = dev;
+	new_desc->usb_intf = intf;
+
+	/* endpoints */
+	new_desc->ep_out = ep_out;
+	new_desc->ep_response = ep_in_set[0];
+	new_desc->ep_image = ep_in_set[1];
+
+	if ( new_desc->ep_out != MTS_EP_OUT )
+		MTS_WARNING( "will this work? Command EP is not usually %d\n",
+			     (int)new_desc->ep_out );
+
+	if ( new_desc->ep_response != MTS_EP_RESPONSE )
+		MTS_WARNING( "will this work? Response EP is not usually %d\n",
+			     (int)new_desc->ep_response );
+
+	if ( new_desc->ep_image != MTS_EP_IMAGE )
+		MTS_WARNING( "will this work? Image data EP is not usually %d\n",
+			     (int)new_desc->ep_image );
+
+	new_desc->host = scsi_host_alloc(&mts_scsi_host_template,
+			sizeof(new_desc));
+	if (!new_desc->host)
+		goto out_kfree2;
+
+	new_desc->host->hostdata[0] = (unsigned long)new_desc;
+	if (scsi_add_host(new_desc->host, &dev->dev)) {
+		err_retval = -EIO;
+		goto out_host_put;
+	}
+	scsi_scan_host(new_desc->host);
+
+	usb_set_intfdata(intf, new_desc);
+	return 0;
+
+ out_host_put:
+	scsi_host_put(new_desc->host);
+ out_kfree2:
+	kfree(new_desc->context.scsi_status);
+ out_free_urb:
+	usb_free_urb(new_desc->urb);
+ out_kfree:
+	kfree(new_desc);
+ out:
+	return err_retval;
+}
+
+static void mts_usb_disconnect (struct usb_interface *intf)
+{
+	struct mts_desc *desc = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+
+	usb_kill_urb(desc->urb);
+	scsi_remove_host(desc->host);
+
+	scsi_host_put(desc->host);
+	usb_free_urb(desc->urb);
+	kfree(desc->context.scsi_status);
+	kfree(desc);
+}
+
+module_usb_driver(mts_usb_driver);
+
+MODULE_AUTHOR( DRIVER_AUTHOR );
+MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/image/microtek.h b/drivers/usb/image/microtek.h
new file mode 100644
index 000000000..7bd5f4639
--- /dev/null
+++ b/drivers/usb/image/microtek.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+ /*
+ * Driver for Microtek Scanmaker X6 USB scanner and possibly others.
+ * 
+ * (C) Copyright 2000 John Fremlin <vii@penguinpowered.com>
+ * (C) Copyright 2000 Oliver Neukum <Oliver.Neukum@lrz.uni-muenchen.de>
+ *
+ * See microtek.c for history
+ *
+ */
+
+typedef void (*mts_scsi_cmnd_callback)(struct scsi_cmnd *);
+
+
+struct mts_transfer_context
+{
+	struct mts_desc *instance;
+	mts_scsi_cmnd_callback final_callback;
+	struct scsi_cmnd *srb;
+	
+	void *data;
+	unsigned data_length;
+	int data_pipe;
+	struct scatterlist *curr_sg;
+
+	u8 *scsi_status; /* status returned from ep_response after command completion */
+};
+
+
+struct mts_desc {
+	struct mts_desc *next;
+	struct mts_desc *prev;
+
+	struct usb_device *usb_dev;
+	struct usb_interface *usb_intf;
+
+	/* Endpoint addresses */
+	u8 ep_out;
+	u8 ep_response;
+	u8 ep_image;
+
+	struct Scsi_Host *host;
+
+	struct urb *urb;
+	struct mts_transfer_context context;
+};
+
+
+#define MTS_EP_OUT	0x1
+#define MTS_EP_RESPONSE	0x2
+#define MTS_EP_IMAGE	0x3
+#define MTS_EP_TOTAL	0x3
+
+#define MTS_SCSI_ERR_MASK ~0x3fu
+
diff --git a/drivers/usb/isp1760/Kconfig b/drivers/usb/isp1760/Kconfig
new file mode 100644
index 000000000..2ed2b7329
--- /dev/null
+++ b/drivers/usb/isp1760/Kconfig
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config USB_ISP1760
+	tristate "NXP ISP 1760/1761/1763 support"
+	depends on USB || USB_GADGET
+	select REGMAP_MMIO
+	help
+	  Say Y or M here if your system as an ISP1760/1763 USB host controller
+	  or an ISP1761 USB dual-role controller.
+
+	  This driver does not support isochronous transfers or OTG.
+	  This USB controller is usually attached to a non-DMA-Master
+	  capable bus. NXP's eval kit brings this chip on PCI card
+	  where the chip itself is behind a PLB to simulate such
+	  a bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called isp1760.
+
+config USB_ISP1760_HCD
+	bool
+
+config USB_ISP1761_UDC
+	bool
+
+if USB_ISP1760
+
+choice
+	bool "ISP1760 Mode Selection"
+	default USB_ISP1760_DUAL_ROLE if (USB && USB_GADGET)
+	default USB_ISP1760_HOST_ROLE if (USB && !USB_GADGET)
+	default USB_ISP1760_GADGET_ROLE if (!USB && USB_GADGET)
+
+config USB_ISP1760_HOST_ROLE
+	bool "Host only mode"
+	depends on USB=y || USB=USB_ISP1760
+	select USB_ISP1760_HCD
+	help
+	  Select this if you want to use the ISP1760 in host mode only. The
+	  gadget function will be disabled.
+
+config USB_ISP1760_GADGET_ROLE
+	bool "Gadget only mode"
+	depends on USB_GADGET=y || USB_GADGET=USB_ISP1760
+	select USB_ISP1761_UDC
+	help
+	  Select this if you want to use the ISP1760 in peripheral mode only.
+	  The host function will be disabled.
+
+config USB_ISP1760_DUAL_ROLE
+	bool "Dual Role mode"
+	depends on USB=y || USB=USB_ISP1760
+	depends on USB_GADGET=y || USB_GADGET=USB_ISP1760
+	select USB_ISP1760_HCD
+	select USB_ISP1761_UDC
+	help
+	  Select this if you want to use the ISP1760 in both host and
+	  peripheral modes.
+
+endchoice
+
+endif
diff --git a/drivers/usb/isp1760/Makefile b/drivers/usb/isp1760/Makefile
new file mode 100644
index 000000000..9bb09e829
--- /dev/null
+++ b/drivers/usb/isp1760/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+isp1760-y := isp1760-core.o isp1760-if.o
+isp1760-$(CONFIG_USB_ISP1760_HCD) += isp1760-hcd.o
+isp1760-$(CONFIG_USB_ISP1761_UDC) += isp1760-udc.o
+
+obj-$(CONFIG_USB_ISP1760)	+= isp1760.o
diff --git a/drivers/usb/isp1760/isp1760-core.c b/drivers/usb/isp1760/isp1760-core.c
new file mode 100644
index 000000000..af88f4fe0
--- /dev/null
+++ b/drivers/usb/isp1760/isp1760-core.c
@@ -0,0 +1,607 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the NXP ISP1760 chip
+ *
+ * Copyright 2021 Linaro, Rui Miguel Silva
+ * Copyright 2014 Laurent Pinchart
+ * Copyright 2007 Sebastian Siewior
+ *
+ * Contacts:
+ *	Sebastian Siewior <bigeasy@linutronix.de>
+ *	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	Rui Miguel Silva <rui.silva@linaro.org>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include "isp1760-core.h"
+#include "isp1760-hcd.h"
+#include "isp1760-regs.h"
+#include "isp1760-udc.h"
+
+static int isp1760_init_core(struct isp1760_device *isp)
+{
+	struct isp1760_hcd *hcd = &isp->hcd;
+	struct isp1760_udc *udc = &isp->udc;
+	u32 otg_ctrl;
+
+	/* Low-level chip reset */
+	if (isp->rst_gpio) {
+		gpiod_set_value_cansleep(isp->rst_gpio, 1);
+		msleep(50);
+		gpiod_set_value_cansleep(isp->rst_gpio, 0);
+	}
+
+	/*
+	 * Reset the host controller, including the CPU interface
+	 * configuration.
+	 */
+	isp1760_field_set(hcd->fields, SW_RESET_RESET_ALL);
+	msleep(100);
+
+	/* Setup HW Mode Control: This assumes a level active-low interrupt */
+	if ((isp->devflags & ISP1760_FLAG_ANALOG_OC) && hcd->is_isp1763) {
+		dev_err(isp->dev, "isp1763 analog overcurrent not available\n");
+		return -EINVAL;
+	}
+
+	if (isp->devflags & ISP1760_FLAG_BUS_WIDTH_16)
+		isp1760_field_clear(hcd->fields, HW_DATA_BUS_WIDTH);
+	if (isp->devflags & ISP1760_FLAG_BUS_WIDTH_8)
+		isp1760_field_set(hcd->fields, HW_DATA_BUS_WIDTH);
+	if (isp->devflags & ISP1760_FLAG_ANALOG_OC)
+		isp1760_field_set(hcd->fields, HW_ANA_DIGI_OC);
+	if (isp->devflags & ISP1760_FLAG_DACK_POL_HIGH)
+		isp1760_field_set(hcd->fields, HW_DACK_POL_HIGH);
+	if (isp->devflags & ISP1760_FLAG_DREQ_POL_HIGH)
+		isp1760_field_set(hcd->fields, HW_DREQ_POL_HIGH);
+	if (isp->devflags & ISP1760_FLAG_INTR_POL_HIGH)
+		isp1760_field_set(hcd->fields, HW_INTR_HIGH_ACT);
+	if (isp->devflags & ISP1760_FLAG_INTR_EDGE_TRIG)
+		isp1760_field_set(hcd->fields, HW_INTR_EDGE_TRIG);
+
+	/*
+	 * The ISP1761 has a dedicated DC IRQ line but supports sharing the HC
+	 * IRQ line for both the host and device controllers. Hardcode IRQ
+	 * sharing for now and disable the DC interrupts globally to avoid
+	 * spurious interrupts during HCD registration.
+	 */
+	if (isp->devflags & ISP1760_FLAG_ISP1761) {
+		isp1760_reg_write(udc->regs, ISP176x_DC_MODE, 0);
+		isp1760_field_set(hcd->fields, HW_COMN_IRQ);
+	}
+
+	/*
+	 * PORT 1 Control register of the ISP1760 is the OTG control register
+	 * on ISP1761.
+	 *
+	 * TODO: Really support OTG. For now we configure port 1 in device mode
+	 */
+	if (isp->devflags & ISP1760_FLAG_ISP1761) {
+		if (isp->devflags & ISP1760_FLAG_PERIPHERAL_EN) {
+			otg_ctrl = (ISP176x_HW_DM_PULLDOWN_CLEAR |
+				    ISP176x_HW_DP_PULLDOWN_CLEAR |
+				    ISP176x_HW_OTG_DISABLE);
+		} else {
+			otg_ctrl = (ISP176x_HW_SW_SEL_HC_DC_CLEAR |
+				    ISP176x_HW_VBUS_DRV |
+				    ISP176x_HW_SEL_CP_EXT);
+		}
+		isp1760_reg_write(hcd->regs, ISP176x_HC_OTG_CTRL, otg_ctrl);
+	}
+
+	dev_info(isp->dev, "%s bus width: %u, oc: %s\n",
+		 hcd->is_isp1763 ? "isp1763" : "isp1760",
+		 isp->devflags & ISP1760_FLAG_BUS_WIDTH_8 ? 8 :
+		 isp->devflags & ISP1760_FLAG_BUS_WIDTH_16 ? 16 : 32,
+		 hcd->is_isp1763 ? "not available" :
+		 isp->devflags & ISP1760_FLAG_ANALOG_OC ? "analog" : "digital");
+
+	return 0;
+}
+
+void isp1760_set_pullup(struct isp1760_device *isp, bool enable)
+{
+	struct isp1760_udc *udc = &isp->udc;
+
+	if (enable)
+		isp1760_field_set(udc->fields, HW_DP_PULLUP);
+	else
+		isp1760_field_set(udc->fields, HW_DP_PULLUP_CLEAR);
+}
+
+/*
+ * ISP1760/61:
+ *
+ * 60kb divided in:
+ * - 32 blocks @ 256  bytes
+ * - 20 blocks @ 1024 bytes
+ * -  4 blocks @ 8192 bytes
+ */
+static const struct isp1760_memory_layout isp176x_memory_conf = {
+	.blocks[0]		= 32,
+	.blocks_size[0]		= 256,
+	.blocks[1]		= 20,
+	.blocks_size[1]		= 1024,
+	.blocks[2]		= 4,
+	.blocks_size[2]		= 8192,
+
+	.slot_num		= 32,
+	.payload_blocks		= 32 + 20 + 4,
+	.payload_area_size	= 0xf000,
+};
+
+/*
+ * ISP1763:
+ *
+ * 20kb divided in:
+ * - 8 blocks @ 256  bytes
+ * - 2 blocks @ 1024 bytes
+ * - 4 blocks @ 4096 bytes
+ */
+static const struct isp1760_memory_layout isp1763_memory_conf = {
+	.blocks[0]		= 8,
+	.blocks_size[0]		= 256,
+	.blocks[1]		= 2,
+	.blocks_size[1]		= 1024,
+	.blocks[2]		= 4,
+	.blocks_size[2]		= 4096,
+
+	.slot_num		= 16,
+	.payload_blocks		= 8 + 2 + 4,
+	.payload_area_size	= 0x5000,
+};
+
+static const struct regmap_range isp176x_hc_volatile_ranges[] = {
+	regmap_reg_range(ISP176x_HC_USBCMD, ISP176x_HC_ATL_PTD_LASTPTD),
+	regmap_reg_range(ISP176x_HC_BUFFER_STATUS, ISP176x_HC_MEMORY),
+	regmap_reg_range(ISP176x_HC_INTERRUPT, ISP176x_HC_OTG_CTRL_CLEAR),
+};
+
+static const struct regmap_access_table isp176x_hc_volatile_table = {
+	.yes_ranges	= isp176x_hc_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(isp176x_hc_volatile_ranges),
+};
+
+static const struct regmap_config isp1760_hc_regmap_conf = {
+	.name = "isp1760-hc",
+	.reg_bits = 16,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.fast_io = true,
+	.max_register = ISP176x_HC_OTG_CTRL_CLEAR,
+	.volatile_table = &isp176x_hc_volatile_table,
+};
+
+static const struct reg_field isp1760_hc_reg_fields[] = {
+	[HCS_PPC]		= REG_FIELD(ISP176x_HC_HCSPARAMS, 4, 4),
+	[HCS_N_PORTS]		= REG_FIELD(ISP176x_HC_HCSPARAMS, 0, 3),
+	[HCC_ISOC_CACHE]	= REG_FIELD(ISP176x_HC_HCCPARAMS, 7, 7),
+	[HCC_ISOC_THRES]	= REG_FIELD(ISP176x_HC_HCCPARAMS, 4, 6),
+	[CMD_LRESET]		= REG_FIELD(ISP176x_HC_USBCMD, 7, 7),
+	[CMD_RESET]		= REG_FIELD(ISP176x_HC_USBCMD, 1, 1),
+	[CMD_RUN]		= REG_FIELD(ISP176x_HC_USBCMD, 0, 0),
+	[STS_PCD]		= REG_FIELD(ISP176x_HC_USBSTS, 2, 2),
+	[HC_FRINDEX]		= REG_FIELD(ISP176x_HC_FRINDEX, 0, 13),
+	[FLAG_CF]		= REG_FIELD(ISP176x_HC_CONFIGFLAG, 0, 0),
+	[HC_ISO_PTD_DONEMAP]	= REG_FIELD(ISP176x_HC_ISO_PTD_DONEMAP, 0, 31),
+	[HC_ISO_PTD_SKIPMAP]	= REG_FIELD(ISP176x_HC_ISO_PTD_SKIPMAP, 0, 31),
+	[HC_ISO_PTD_LASTPTD]	= REG_FIELD(ISP176x_HC_ISO_PTD_LASTPTD, 0, 31),
+	[HC_INT_PTD_DONEMAP]	= REG_FIELD(ISP176x_HC_INT_PTD_DONEMAP, 0, 31),
+	[HC_INT_PTD_SKIPMAP]	= REG_FIELD(ISP176x_HC_INT_PTD_SKIPMAP, 0, 31),
+	[HC_INT_PTD_LASTPTD]	= REG_FIELD(ISP176x_HC_INT_PTD_LASTPTD, 0, 31),
+	[HC_ATL_PTD_DONEMAP]	= REG_FIELD(ISP176x_HC_ATL_PTD_DONEMAP, 0, 31),
+	[HC_ATL_PTD_SKIPMAP]	= REG_FIELD(ISP176x_HC_ATL_PTD_SKIPMAP, 0, 31),
+	[HC_ATL_PTD_LASTPTD]	= REG_FIELD(ISP176x_HC_ATL_PTD_LASTPTD, 0, 31),
+	[PORT_OWNER]		= REG_FIELD(ISP176x_HC_PORTSC1, 13, 13),
+	[PORT_POWER]		= REG_FIELD(ISP176x_HC_PORTSC1, 12, 12),
+	[PORT_LSTATUS]		= REG_FIELD(ISP176x_HC_PORTSC1, 10, 11),
+	[PORT_RESET]		= REG_FIELD(ISP176x_HC_PORTSC1, 8, 8),
+	[PORT_SUSPEND]		= REG_FIELD(ISP176x_HC_PORTSC1, 7, 7),
+	[PORT_RESUME]		= REG_FIELD(ISP176x_HC_PORTSC1, 6, 6),
+	[PORT_PE]		= REG_FIELD(ISP176x_HC_PORTSC1, 2, 2),
+	[PORT_CSC]		= REG_FIELD(ISP176x_HC_PORTSC1, 1, 1),
+	[PORT_CONNECT]		= REG_FIELD(ISP176x_HC_PORTSC1, 0, 0),
+	[ALL_ATX_RESET]		= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 31, 31),
+	[HW_ANA_DIGI_OC]	= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 15, 15),
+	[HW_COMN_IRQ]		= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 10, 10),
+	[HW_DATA_BUS_WIDTH]	= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 8, 8),
+	[HW_DACK_POL_HIGH]	= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 6, 6),
+	[HW_DREQ_POL_HIGH]	= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 5, 5),
+	[HW_INTR_HIGH_ACT]	= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 2, 2),
+	[HW_INTR_EDGE_TRIG]	= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 1, 1),
+	[HW_GLOBAL_INTR_EN]	= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 0, 0),
+	[HC_CHIP_REV]		= REG_FIELD(ISP176x_HC_CHIP_ID, 16, 31),
+	[HC_CHIP_ID_HIGH]	= REG_FIELD(ISP176x_HC_CHIP_ID, 8, 15),
+	[HC_CHIP_ID_LOW]	= REG_FIELD(ISP176x_HC_CHIP_ID, 0, 7),
+	[HC_SCRATCH]		= REG_FIELD(ISP176x_HC_SCRATCH, 0, 31),
+	[SW_RESET_RESET_ALL]	= REG_FIELD(ISP176x_HC_RESET, 0, 0),
+	[ISO_BUF_FILL]		= REG_FIELD(ISP176x_HC_BUFFER_STATUS, 2, 2),
+	[INT_BUF_FILL]		= REG_FIELD(ISP176x_HC_BUFFER_STATUS, 1, 1),
+	[ATL_BUF_FILL]		= REG_FIELD(ISP176x_HC_BUFFER_STATUS, 0, 0),
+	[MEM_BANK_SEL]		= REG_FIELD(ISP176x_HC_MEMORY, 16, 17),
+	[MEM_START_ADDR]	= REG_FIELD(ISP176x_HC_MEMORY, 0, 15),
+	[HC_INTERRUPT]		= REG_FIELD(ISP176x_HC_INTERRUPT, 0, 9),
+	[HC_ATL_IRQ_ENABLE]	= REG_FIELD(ISP176x_HC_INTERRUPT_ENABLE, 8, 8),
+	[HC_INT_IRQ_ENABLE]	= REG_FIELD(ISP176x_HC_INTERRUPT_ENABLE, 7, 7),
+	[HC_ISO_IRQ_MASK_OR]	= REG_FIELD(ISP176x_HC_ISO_IRQ_MASK_OR, 0, 31),
+	[HC_INT_IRQ_MASK_OR]	= REG_FIELD(ISP176x_HC_INT_IRQ_MASK_OR, 0, 31),
+	[HC_ATL_IRQ_MASK_OR]	= REG_FIELD(ISP176x_HC_ATL_IRQ_MASK_OR, 0, 31),
+	[HC_ISO_IRQ_MASK_AND]	= REG_FIELD(ISP176x_HC_ISO_IRQ_MASK_AND, 0, 31),
+	[HC_INT_IRQ_MASK_AND]	= REG_FIELD(ISP176x_HC_INT_IRQ_MASK_AND, 0, 31),
+	[HC_ATL_IRQ_MASK_AND]	= REG_FIELD(ISP176x_HC_ATL_IRQ_MASK_AND, 0, 31),
+	[HW_OTG_DISABLE_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 26, 26),
+	[HW_SW_SEL_HC_DC_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 23, 23),
+	[HW_VBUS_DRV_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 20, 20),
+	[HW_SEL_CP_EXT_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 19, 19),
+	[HW_DM_PULLDOWN_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 18, 18),
+	[HW_DP_PULLDOWN_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 17, 17),
+	[HW_DP_PULLUP_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 16, 16),
+	[HW_OTG_DISABLE]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 10, 10),
+	[HW_SW_SEL_HC_DC]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 7, 7),
+	[HW_VBUS_DRV]		= REG_FIELD(ISP176x_HC_OTG_CTRL, 4, 4),
+	[HW_SEL_CP_EXT]		= REG_FIELD(ISP176x_HC_OTG_CTRL, 3, 3),
+	[HW_DM_PULLDOWN]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 2, 2),
+	[HW_DP_PULLDOWN]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 1, 1),
+	[HW_DP_PULLUP]		= REG_FIELD(ISP176x_HC_OTG_CTRL, 0, 0),
+	/* Make sure the array is sized properly during compilation */
+	[HC_FIELD_MAX]		= {},
+};
+
+static const struct reg_field isp1763_hc_reg_fields[] = {
+	[CMD_LRESET]		= REG_FIELD(ISP1763_HC_USBCMD, 7, 7),
+	[CMD_RESET]		= REG_FIELD(ISP1763_HC_USBCMD, 1, 1),
+	[CMD_RUN]		= REG_FIELD(ISP1763_HC_USBCMD, 0, 0),
+	[STS_PCD]		= REG_FIELD(ISP1763_HC_USBSTS, 2, 2),
+	[HC_FRINDEX]		= REG_FIELD(ISP1763_HC_FRINDEX, 0, 13),
+	[FLAG_CF]		= REG_FIELD(ISP1763_HC_CONFIGFLAG, 0, 0),
+	[HC_ISO_PTD_DONEMAP]	= REG_FIELD(ISP1763_HC_ISO_PTD_DONEMAP, 0, 15),
+	[HC_ISO_PTD_SKIPMAP]	= REG_FIELD(ISP1763_HC_ISO_PTD_SKIPMAP, 0, 15),
+	[HC_ISO_PTD_LASTPTD]	= REG_FIELD(ISP1763_HC_ISO_PTD_LASTPTD, 0, 15),
+	[HC_INT_PTD_DONEMAP]	= REG_FIELD(ISP1763_HC_INT_PTD_DONEMAP, 0, 15),
+	[HC_INT_PTD_SKIPMAP]	= REG_FIELD(ISP1763_HC_INT_PTD_SKIPMAP, 0, 15),
+	[HC_INT_PTD_LASTPTD]	= REG_FIELD(ISP1763_HC_INT_PTD_LASTPTD, 0, 15),
+	[HC_ATL_PTD_DONEMAP]	= REG_FIELD(ISP1763_HC_ATL_PTD_DONEMAP, 0, 15),
+	[HC_ATL_PTD_SKIPMAP]	= REG_FIELD(ISP1763_HC_ATL_PTD_SKIPMAP, 0, 15),
+	[HC_ATL_PTD_LASTPTD]	= REG_FIELD(ISP1763_HC_ATL_PTD_LASTPTD, 0, 15),
+	[PORT_OWNER]		= REG_FIELD(ISP1763_HC_PORTSC1, 13, 13),
+	[PORT_POWER]		= REG_FIELD(ISP1763_HC_PORTSC1, 12, 12),
+	[PORT_LSTATUS]		= REG_FIELD(ISP1763_HC_PORTSC1, 10, 11),
+	[PORT_RESET]		= REG_FIELD(ISP1763_HC_PORTSC1, 8, 8),
+	[PORT_SUSPEND]		= REG_FIELD(ISP1763_HC_PORTSC1, 7, 7),
+	[PORT_RESUME]		= REG_FIELD(ISP1763_HC_PORTSC1, 6, 6),
+	[PORT_PE]		= REG_FIELD(ISP1763_HC_PORTSC1, 2, 2),
+	[PORT_CSC]		= REG_FIELD(ISP1763_HC_PORTSC1, 1, 1),
+	[PORT_CONNECT]		= REG_FIELD(ISP1763_HC_PORTSC1, 0, 0),
+	[HW_DATA_BUS_WIDTH]	= REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 4, 4),
+	[HW_DACK_POL_HIGH]	= REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 6, 6),
+	[HW_DREQ_POL_HIGH]	= REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 5, 5),
+	[HW_INTF_LOCK]		= REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 3, 3),
+	[HW_INTR_HIGH_ACT]	= REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 2, 2),
+	[HW_INTR_EDGE_TRIG]	= REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 1, 1),
+	[HW_GLOBAL_INTR_EN]	= REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 0, 0),
+	[SW_RESET_RESET_ATX]	= REG_FIELD(ISP1763_HC_RESET, 3, 3),
+	[SW_RESET_RESET_ALL]	= REG_FIELD(ISP1763_HC_RESET, 0, 0),
+	[HC_CHIP_ID_HIGH]	= REG_FIELD(ISP1763_HC_CHIP_ID, 0, 15),
+	[HC_CHIP_ID_LOW]	= REG_FIELD(ISP1763_HC_CHIP_REV, 8, 15),
+	[HC_CHIP_REV]		= REG_FIELD(ISP1763_HC_CHIP_REV, 0, 7),
+	[HC_SCRATCH]		= REG_FIELD(ISP1763_HC_SCRATCH, 0, 15),
+	[ISO_BUF_FILL]		= REG_FIELD(ISP1763_HC_BUFFER_STATUS, 2, 2),
+	[INT_BUF_FILL]		= REG_FIELD(ISP1763_HC_BUFFER_STATUS, 1, 1),
+	[ATL_BUF_FILL]		= REG_FIELD(ISP1763_HC_BUFFER_STATUS, 0, 0),
+	[MEM_START_ADDR]	= REG_FIELD(ISP1763_HC_MEMORY, 0, 15),
+	[HC_DATA]		= REG_FIELD(ISP1763_HC_DATA, 0, 15),
+	[HC_INTERRUPT]		= REG_FIELD(ISP1763_HC_INTERRUPT, 0, 10),
+	[HC_ATL_IRQ_ENABLE]	= REG_FIELD(ISP1763_HC_INTERRUPT_ENABLE, 8, 8),
+	[HC_INT_IRQ_ENABLE]	= REG_FIELD(ISP1763_HC_INTERRUPT_ENABLE, 7, 7),
+	[HC_ISO_IRQ_MASK_OR]	= REG_FIELD(ISP1763_HC_ISO_IRQ_MASK_OR, 0, 15),
+	[HC_INT_IRQ_MASK_OR]	= REG_FIELD(ISP1763_HC_INT_IRQ_MASK_OR, 0, 15),
+	[HC_ATL_IRQ_MASK_OR]	= REG_FIELD(ISP1763_HC_ATL_IRQ_MASK_OR, 0, 15),
+	[HC_ISO_IRQ_MASK_AND]	= REG_FIELD(ISP1763_HC_ISO_IRQ_MASK_AND, 0, 15),
+	[HC_INT_IRQ_MASK_AND]	= REG_FIELD(ISP1763_HC_INT_IRQ_MASK_AND, 0, 15),
+	[HC_ATL_IRQ_MASK_AND]	= REG_FIELD(ISP1763_HC_ATL_IRQ_MASK_AND, 0, 15),
+	[HW_HC_2_DIS]		= REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 15, 15),
+	[HW_OTG_DISABLE]	= REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 10, 10),
+	[HW_SW_SEL_HC_DC]	= REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 7, 7),
+	[HW_VBUS_DRV]		= REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 4, 4),
+	[HW_SEL_CP_EXT]		= REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 3, 3),
+	[HW_DM_PULLDOWN]	= REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 2, 2),
+	[HW_DP_PULLDOWN]	= REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 1, 1),
+	[HW_DP_PULLUP]		= REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 0, 0),
+	[HW_HC_2_DIS_CLEAR]	= REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 15, 15),
+	[HW_OTG_DISABLE_CLEAR]	= REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 10, 10),
+	[HW_SW_SEL_HC_DC_CLEAR]	= REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 7, 7),
+	[HW_VBUS_DRV_CLEAR]	= REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 4, 4),
+	[HW_SEL_CP_EXT_CLEAR]	= REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 3, 3),
+	[HW_DM_PULLDOWN_CLEAR]	= REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 2, 2),
+	[HW_DP_PULLDOWN_CLEAR]	= REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 1, 1),
+	[HW_DP_PULLUP_CLEAR]	= REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 0, 0),
+	/* Make sure the array is sized properly during compilation */
+	[HC_FIELD_MAX]		= {},
+};
+
+static const struct regmap_range isp1763_hc_volatile_ranges[] = {
+	regmap_reg_range(ISP1763_HC_USBCMD, ISP1763_HC_ATL_PTD_LASTPTD),
+	regmap_reg_range(ISP1763_HC_BUFFER_STATUS, ISP1763_HC_DATA),
+	regmap_reg_range(ISP1763_HC_INTERRUPT, ISP1763_HC_OTG_CTRL_CLEAR),
+};
+
+static const struct regmap_access_table isp1763_hc_volatile_table = {
+	.yes_ranges	= isp1763_hc_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(isp1763_hc_volatile_ranges),
+};
+
+static const struct regmap_config isp1763_hc_regmap_conf = {
+	.name = "isp1763-hc",
+	.reg_bits = 8,
+	.reg_stride = 2,
+	.val_bits = 16,
+	.fast_io = true,
+	.max_register = ISP1763_HC_OTG_CTRL_CLEAR,
+	.volatile_table = &isp1763_hc_volatile_table,
+};
+
+static const struct regmap_range isp176x_dc_volatile_ranges[] = {
+	regmap_reg_range(ISP176x_DC_EPMAXPKTSZ, ISP176x_DC_EPTYPE),
+	regmap_reg_range(ISP176x_DC_BUFLEN, ISP176x_DC_EPINDEX),
+};
+
+static const struct regmap_access_table isp176x_dc_volatile_table = {
+	.yes_ranges	= isp176x_dc_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(isp176x_dc_volatile_ranges),
+};
+
+static const struct regmap_config isp1761_dc_regmap_conf = {
+	.name = "isp1761-dc",
+	.reg_bits = 16,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.fast_io = true,
+	.max_register = ISP176x_DC_TESTMODE,
+	.volatile_table = &isp176x_dc_volatile_table,
+};
+
+static const struct reg_field isp1761_dc_reg_fields[] = {
+	[DC_DEVEN]		= REG_FIELD(ISP176x_DC_ADDRESS, 7, 7),
+	[DC_DEVADDR]		= REG_FIELD(ISP176x_DC_ADDRESS, 0, 6),
+	[DC_VBUSSTAT]		= REG_FIELD(ISP176x_DC_MODE, 8, 8),
+	[DC_SFRESET]		= REG_FIELD(ISP176x_DC_MODE, 4, 4),
+	[DC_GLINTENA]		= REG_FIELD(ISP176x_DC_MODE, 3, 3),
+	[DC_CDBGMOD_ACK]	= REG_FIELD(ISP176x_DC_INTCONF, 6, 6),
+	[DC_DDBGMODIN_ACK]	= REG_FIELD(ISP176x_DC_INTCONF, 4, 4),
+	[DC_DDBGMODOUT_ACK]	= REG_FIELD(ISP176x_DC_INTCONF, 2, 2),
+	[DC_INTPOL]		= REG_FIELD(ISP176x_DC_INTCONF, 0, 0),
+	[DC_IEPRXTX_7]		= REG_FIELD(ISP176x_DC_INTENABLE, 25, 25),
+	[DC_IEPRXTX_6]		= REG_FIELD(ISP176x_DC_INTENABLE, 23, 23),
+	[DC_IEPRXTX_5]		= REG_FIELD(ISP176x_DC_INTENABLE, 21, 21),
+	[DC_IEPRXTX_4]		= REG_FIELD(ISP176x_DC_INTENABLE, 19, 19),
+	[DC_IEPRXTX_3]		= REG_FIELD(ISP176x_DC_INTENABLE, 17, 17),
+	[DC_IEPRXTX_2]		= REG_FIELD(ISP176x_DC_INTENABLE, 15, 15),
+	[DC_IEPRXTX_1]		= REG_FIELD(ISP176x_DC_INTENABLE, 13, 13),
+	[DC_IEPRXTX_0]		= REG_FIELD(ISP176x_DC_INTENABLE, 11, 11),
+	[DC_IEP0SETUP]		= REG_FIELD(ISP176x_DC_INTENABLE, 8, 8),
+	[DC_IEVBUS]		= REG_FIELD(ISP176x_DC_INTENABLE, 7, 7),
+	[DC_IEHS_STA]		= REG_FIELD(ISP176x_DC_INTENABLE, 5, 5),
+	[DC_IERESM]		= REG_FIELD(ISP176x_DC_INTENABLE, 4, 4),
+	[DC_IESUSP]		= REG_FIELD(ISP176x_DC_INTENABLE, 3, 3),
+	[DC_IEBRST]		= REG_FIELD(ISP176x_DC_INTENABLE, 0, 0),
+	[DC_EP0SETUP]		= REG_FIELD(ISP176x_DC_EPINDEX, 5, 5),
+	[DC_ENDPIDX]		= REG_FIELD(ISP176x_DC_EPINDEX, 1, 4),
+	[DC_EPDIR]		= REG_FIELD(ISP176x_DC_EPINDEX, 0, 0),
+	[DC_CLBUF]		= REG_FIELD(ISP176x_DC_CTRLFUNC, 4, 4),
+	[DC_VENDP]		= REG_FIELD(ISP176x_DC_CTRLFUNC, 3, 3),
+	[DC_DSEN]		= REG_FIELD(ISP176x_DC_CTRLFUNC, 2, 2),
+	[DC_STATUS]		= REG_FIELD(ISP176x_DC_CTRLFUNC, 1, 1),
+	[DC_STALL]		= REG_FIELD(ISP176x_DC_CTRLFUNC, 0, 0),
+	[DC_BUFLEN]		= REG_FIELD(ISP176x_DC_BUFLEN, 0, 15),
+	[DC_FFOSZ]		= REG_FIELD(ISP176x_DC_EPMAXPKTSZ, 0, 10),
+	[DC_EPENABLE]		= REG_FIELD(ISP176x_DC_EPTYPE, 3, 3),
+	[DC_ENDPTYP]		= REG_FIELD(ISP176x_DC_EPTYPE, 0, 1),
+	[DC_UFRAMENUM]		= REG_FIELD(ISP176x_DC_FRAMENUM, 11, 13),
+	[DC_FRAMENUM]		= REG_FIELD(ISP176x_DC_FRAMENUM, 0, 10),
+	[DC_CHIP_ID_HIGH]	= REG_FIELD(ISP176x_DC_CHIPID, 16, 31),
+	[DC_CHIP_ID_LOW]	= REG_FIELD(ISP176x_DC_CHIPID, 0, 15),
+	[DC_SCRATCH]		= REG_FIELD(ISP176x_DC_SCRATCH, 0, 15),
+	/* Make sure the array is sized properly during compilation */
+	[DC_FIELD_MAX]		= {},
+};
+
+static const struct regmap_range isp1763_dc_volatile_ranges[] = {
+	regmap_reg_range(ISP1763_DC_EPMAXPKTSZ, ISP1763_DC_EPTYPE),
+	regmap_reg_range(ISP1763_DC_BUFLEN, ISP1763_DC_EPINDEX),
+};
+
+static const struct regmap_access_table isp1763_dc_volatile_table = {
+	.yes_ranges	= isp1763_dc_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(isp1763_dc_volatile_ranges),
+};
+
+static const struct reg_field isp1763_dc_reg_fields[] = {
+	[DC_DEVEN]		= REG_FIELD(ISP1763_DC_ADDRESS, 7, 7),
+	[DC_DEVADDR]		= REG_FIELD(ISP1763_DC_ADDRESS, 0, 6),
+	[DC_VBUSSTAT]		= REG_FIELD(ISP1763_DC_MODE, 8, 8),
+	[DC_SFRESET]		= REG_FIELD(ISP1763_DC_MODE, 4, 4),
+	[DC_GLINTENA]		= REG_FIELD(ISP1763_DC_MODE, 3, 3),
+	[DC_CDBGMOD_ACK]	= REG_FIELD(ISP1763_DC_INTCONF, 6, 6),
+	[DC_DDBGMODIN_ACK]	= REG_FIELD(ISP1763_DC_INTCONF, 4, 4),
+	[DC_DDBGMODOUT_ACK]	= REG_FIELD(ISP1763_DC_INTCONF, 2, 2),
+	[DC_INTPOL]		= REG_FIELD(ISP1763_DC_INTCONF, 0, 0),
+	[DC_IEPRXTX_7]		= REG_FIELD(ISP1763_DC_INTENABLE, 25, 25),
+	[DC_IEPRXTX_6]		= REG_FIELD(ISP1763_DC_INTENABLE, 23, 23),
+	[DC_IEPRXTX_5]		= REG_FIELD(ISP1763_DC_INTENABLE, 21, 21),
+	[DC_IEPRXTX_4]		= REG_FIELD(ISP1763_DC_INTENABLE, 19, 19),
+	[DC_IEPRXTX_3]		= REG_FIELD(ISP1763_DC_INTENABLE, 17, 17),
+	[DC_IEPRXTX_2]		= REG_FIELD(ISP1763_DC_INTENABLE, 15, 15),
+	[DC_IEPRXTX_1]		= REG_FIELD(ISP1763_DC_INTENABLE, 13, 13),
+	[DC_IEPRXTX_0]		= REG_FIELD(ISP1763_DC_INTENABLE, 11, 11),
+	[DC_IEP0SETUP]		= REG_FIELD(ISP1763_DC_INTENABLE, 8, 8),
+	[DC_IEVBUS]		= REG_FIELD(ISP1763_DC_INTENABLE, 7, 7),
+	[DC_IEHS_STA]		= REG_FIELD(ISP1763_DC_INTENABLE, 5, 5),
+	[DC_IERESM]		= REG_FIELD(ISP1763_DC_INTENABLE, 4, 4),
+	[DC_IESUSP]		= REG_FIELD(ISP1763_DC_INTENABLE, 3, 3),
+	[DC_IEBRST]		= REG_FIELD(ISP1763_DC_INTENABLE, 0, 0),
+	[DC_EP0SETUP]		= REG_FIELD(ISP1763_DC_EPINDEX, 5, 5),
+	[DC_ENDPIDX]		= REG_FIELD(ISP1763_DC_EPINDEX, 1, 4),
+	[DC_EPDIR]		= REG_FIELD(ISP1763_DC_EPINDEX, 0, 0),
+	[DC_CLBUF]		= REG_FIELD(ISP1763_DC_CTRLFUNC, 4, 4),
+	[DC_VENDP]		= REG_FIELD(ISP1763_DC_CTRLFUNC, 3, 3),
+	[DC_DSEN]		= REG_FIELD(ISP1763_DC_CTRLFUNC, 2, 2),
+	[DC_STATUS]		= REG_FIELD(ISP1763_DC_CTRLFUNC, 1, 1),
+	[DC_STALL]		= REG_FIELD(ISP1763_DC_CTRLFUNC, 0, 0),
+	[DC_BUFLEN]		= REG_FIELD(ISP1763_DC_BUFLEN, 0, 15),
+	[DC_FFOSZ]		= REG_FIELD(ISP1763_DC_EPMAXPKTSZ, 0, 10),
+	[DC_EPENABLE]		= REG_FIELD(ISP1763_DC_EPTYPE, 3, 3),
+	[DC_ENDPTYP]		= REG_FIELD(ISP1763_DC_EPTYPE, 0, 1),
+	[DC_UFRAMENUM]		= REG_FIELD(ISP1763_DC_FRAMENUM, 11, 13),
+	[DC_FRAMENUM]		= REG_FIELD(ISP1763_DC_FRAMENUM, 0, 10),
+	[DC_CHIP_ID_HIGH]	= REG_FIELD(ISP1763_DC_CHIPID_HIGH, 0, 15),
+	[DC_CHIP_ID_LOW]	= REG_FIELD(ISP1763_DC_CHIPID_LOW, 0, 15),
+	[DC_SCRATCH]		= REG_FIELD(ISP1763_DC_SCRATCH, 0, 15),
+	/* Make sure the array is sized properly during compilation */
+	[DC_FIELD_MAX]		= {},
+};
+
+static const struct regmap_config isp1763_dc_regmap_conf = {
+	.name = "isp1763-dc",
+	.reg_bits = 8,
+	.reg_stride = 2,
+	.val_bits = 16,
+	.fast_io = true,
+	.max_register = ISP1763_DC_TESTMODE,
+	.volatile_table = &isp1763_dc_volatile_table,
+};
+
+int isp1760_register(struct resource *mem, int irq, unsigned long irqflags,
+		     struct device *dev, unsigned int devflags)
+{
+	const struct regmap_config *hc_regmap;
+	const struct reg_field *hc_reg_fields;
+	const struct regmap_config *dc_regmap;
+	const struct reg_field *dc_reg_fields;
+	struct isp1760_device *isp;
+	struct isp1760_hcd *hcd;
+	struct isp1760_udc *udc;
+	struct regmap_field *f;
+	bool udc_enabled;
+	int ret;
+	int i;
+
+	/*
+	 * If neither the HCD not the UDC is enabled return an error, as no
+	 * device would be registered.
+	 */
+	udc_enabled = ((devflags & ISP1760_FLAG_ISP1763) ||
+		       (devflags & ISP1760_FLAG_ISP1761));
+
+	if ((!IS_ENABLED(CONFIG_USB_ISP1760_HCD) || usb_disabled()) &&
+	    (!udc_enabled || !IS_ENABLED(CONFIG_USB_ISP1761_UDC)))
+		return -ENODEV;
+
+	isp = devm_kzalloc(dev, sizeof(*isp), GFP_KERNEL);
+	if (!isp)
+		return -ENOMEM;
+
+	isp->dev = dev;
+	isp->devflags = devflags;
+	hcd = &isp->hcd;
+	udc = &isp->udc;
+
+	hcd->is_isp1763 = !!(devflags & ISP1760_FLAG_ISP1763);
+	udc->is_isp1763 = !!(devflags & ISP1760_FLAG_ISP1763);
+
+	if (!hcd->is_isp1763 && (devflags & ISP1760_FLAG_BUS_WIDTH_8)) {
+		dev_err(dev, "isp1760/61 do not support data width 8\n");
+		return -EINVAL;
+	}
+
+	if (hcd->is_isp1763) {
+		hc_regmap = &isp1763_hc_regmap_conf;
+		hc_reg_fields = &isp1763_hc_reg_fields[0];
+		dc_regmap = &isp1763_dc_regmap_conf;
+		dc_reg_fields = &isp1763_dc_reg_fields[0];
+	} else {
+		hc_regmap = &isp1760_hc_regmap_conf;
+		hc_reg_fields = &isp1760_hc_reg_fields[0];
+		dc_regmap = &isp1761_dc_regmap_conf;
+		dc_reg_fields = &isp1761_dc_reg_fields[0];
+	}
+
+	isp->rst_gpio = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH);
+	if (IS_ERR(isp->rst_gpio))
+		return PTR_ERR(isp->rst_gpio);
+
+	hcd->base = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(hcd->base))
+		return PTR_ERR(hcd->base);
+
+	hcd->regs = devm_regmap_init_mmio(dev, hcd->base, hc_regmap);
+	if (IS_ERR(hcd->regs))
+		return PTR_ERR(hcd->regs);
+
+	for (i = 0; i < HC_FIELD_MAX; i++) {
+		f = devm_regmap_field_alloc(dev, hcd->regs, hc_reg_fields[i]);
+		if (IS_ERR(f))
+			return PTR_ERR(f);
+
+		hcd->fields[i] = f;
+	}
+
+	udc->regs = devm_regmap_init_mmio(dev, hcd->base, dc_regmap);
+	if (IS_ERR(udc->regs))
+		return PTR_ERR(udc->regs);
+
+	for (i = 0; i < DC_FIELD_MAX; i++) {
+		f = devm_regmap_field_alloc(dev, udc->regs, dc_reg_fields[i]);
+		if (IS_ERR(f))
+			return PTR_ERR(f);
+
+		udc->fields[i] = f;
+	}
+
+	if (hcd->is_isp1763)
+		hcd->memory_layout = &isp1763_memory_conf;
+	else
+		hcd->memory_layout = &isp176x_memory_conf;
+
+	ret = isp1760_init_core(isp);
+	if (ret < 0)
+		return ret;
+
+	if (IS_ENABLED(CONFIG_USB_ISP1760_HCD) && !usb_disabled()) {
+		ret = isp1760_hcd_register(hcd, mem, irq,
+					   irqflags | IRQF_SHARED, dev);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (udc_enabled && IS_ENABLED(CONFIG_USB_ISP1761_UDC)) {
+		ret = isp1760_udc_register(isp, irq, irqflags);
+		if (ret < 0) {
+			isp1760_hcd_unregister(hcd);
+			return ret;
+		}
+	}
+
+	dev_set_drvdata(dev, isp);
+
+	return 0;
+}
+
+void isp1760_unregister(struct device *dev)
+{
+	struct isp1760_device *isp = dev_get_drvdata(dev);
+
+	isp1760_udc_unregister(isp);
+	isp1760_hcd_unregister(&isp->hcd);
+}
+
+MODULE_DESCRIPTION("Driver for the ISP1760 USB-controller from NXP");
+MODULE_AUTHOR("Sebastian Siewior <bigeasy@linuxtronix.de>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/isp1760/isp1760-core.h b/drivers/usb/isp1760/isp1760-core.h
new file mode 100644
index 000000000..91e0ee399
--- /dev/null
+++ b/drivers/usb/isp1760/isp1760-core.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Driver for the NXP ISP1760 chip
+ *
+ * Copyright 2021 Linaro, Rui Miguel Silva
+ * Copyright 2014 Laurent Pinchart
+ * Copyright 2007 Sebastian Siewior
+ *
+ * Contacts:
+ *	Sebastian Siewior <bigeasy@linutronix.de>
+ *	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	Rui Miguel Silva <rui.silva@linaro.org>
+ */
+
+#ifndef _ISP1760_CORE_H_
+#define _ISP1760_CORE_H_
+
+#include <linux/ioport.h>
+#include <linux/regmap.h>
+
+#include "isp1760-hcd.h"
+#include "isp1760-udc.h"
+
+struct device;
+struct gpio_desc;
+
+/*
+ * Device flags that can vary from board to board.  All of these
+ * indicate the most "atypical" case, so that a devflags of 0 is
+ * a sane default configuration.
+ */
+#define ISP1760_FLAG_BUS_WIDTH_16	0x00000002 /* 16-bit data bus width */
+#define ISP1760_FLAG_PERIPHERAL_EN	0x00000004 /* Port 1 supports Peripheral mode*/
+#define ISP1760_FLAG_ANALOG_OC		0x00000008 /* Analog overcurrent */
+#define ISP1760_FLAG_DACK_POL_HIGH	0x00000010 /* DACK active high */
+#define ISP1760_FLAG_DREQ_POL_HIGH	0x00000020 /* DREQ active high */
+#define ISP1760_FLAG_ISP1761		0x00000040 /* Chip is ISP1761 */
+#define ISP1760_FLAG_INTR_POL_HIGH	0x00000080 /* Interrupt polarity active high */
+#define ISP1760_FLAG_INTR_EDGE_TRIG	0x00000100 /* Interrupt edge triggered */
+#define ISP1760_FLAG_ISP1763		0x00000200 /* Chip is ISP1763 */
+#define ISP1760_FLAG_BUS_WIDTH_8	0x00000400 /* 8-bit data bus width */
+
+struct isp1760_device {
+	struct device *dev;
+
+	unsigned int devflags;
+	struct gpio_desc *rst_gpio;
+
+	struct isp1760_hcd hcd;
+	struct isp1760_udc udc;
+};
+
+int isp1760_register(struct resource *mem, int irq, unsigned long irqflags,
+		     struct device *dev, unsigned int devflags);
+void isp1760_unregister(struct device *dev);
+
+void isp1760_set_pullup(struct isp1760_device *isp, bool enable);
+
+static inline u32 isp1760_field_read(struct regmap_field **fields, u32 field)
+{
+	unsigned int val;
+
+	regmap_field_read(fields[field], &val);
+
+	return val;
+}
+
+static inline void isp1760_field_write(struct regmap_field **fields, u32 field,
+				       u32 val)
+{
+	regmap_field_write(fields[field], val);
+}
+
+static inline void isp1760_field_set(struct regmap_field **fields, u32 field)
+{
+	isp1760_field_write(fields, field, 0xFFFFFFFF);
+}
+
+static inline void isp1760_field_clear(struct regmap_field **fields, u32 field)
+{
+	isp1760_field_write(fields, field, 0);
+}
+
+static inline u32 isp1760_reg_read(struct regmap *regs, u32 reg)
+{
+	unsigned int val;
+
+	regmap_read(regs, reg, &val);
+
+	return val;
+}
+
+static inline void isp1760_reg_write(struct regmap *regs, u32 reg, u32 val)
+{
+	regmap_write(regs, reg, val);
+}
+#endif
diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
new file mode 100644
index 000000000..76862ba40
--- /dev/null
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -0,0 +1,2626 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the NXP ISP1760 chip
+ *
+ * However, the code might contain some bugs. What doesn't work for sure is:
+ * - ISO
+ * - OTG
+ e The interrupt line is configured as active low, level.
+ *
+ * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
+ *
+ * (c) 2011 Arvid Brodin <arvid.brodin@enea.com>
+ *
+ * Copyright 2021 Linaro, Rui Miguel Silva <rui.silva@linaro.org>
+ *
+ */
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mm.h>
+#include <linux/timer.h>
+#include <asm/unaligned.h>
+#include <asm/cacheflush.h>
+
+#include "isp1760-core.h"
+#include "isp1760-hcd.h"
+#include "isp1760-regs.h"
+
+static struct kmem_cache *qtd_cachep;
+static struct kmem_cache *qh_cachep;
+static struct kmem_cache *urb_listitem_cachep;
+
+typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
+		struct isp1760_qtd *qtd);
+
+static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd)
+{
+	return *(struct isp1760_hcd **)hcd->hcd_priv;
+}
+
+#define dw_to_le32(x)	(cpu_to_le32((__force u32)x))
+#define le32_to_dw(x)	((__force __dw)(le32_to_cpu(x)))
+
+/* urb state*/
+#define DELETE_URB		(0x0008)
+#define NO_TRANSFER_ACTIVE	(0xffffffff)
+
+/* Philips Proprietary Transfer Descriptor (PTD) */
+typedef __u32 __bitwise __dw;
+struct ptd {
+	__dw dw0;
+	__dw dw1;
+	__dw dw2;
+	__dw dw3;
+	__dw dw4;
+	__dw dw5;
+	__dw dw6;
+	__dw dw7;
+};
+
+struct ptd_le32 {
+	__le32 dw0;
+	__le32 dw1;
+	__le32 dw2;
+	__le32 dw3;
+	__le32 dw4;
+	__le32 dw5;
+	__le32 dw6;
+	__le32 dw7;
+};
+
+#define PTD_OFFSET		0x0400
+#define ISO_PTD_OFFSET		0x0400
+#define INT_PTD_OFFSET		0x0800
+#define ATL_PTD_OFFSET		0x0c00
+#define PAYLOAD_OFFSET		0x1000
+
+#define ISP_BANK_0		0x00
+#define ISP_BANK_1		0x01
+#define ISP_BANK_2		0x02
+#define ISP_BANK_3		0x03
+
+#define TO_DW(x)	((__force __dw)x)
+#define TO_U32(x)	((__force u32)x)
+
+ /* ATL */
+ /* DW0 */
+#define DW0_VALID_BIT			TO_DW(1)
+#define FROM_DW0_VALID(x)		(TO_U32(x) & 0x01)
+#define TO_DW0_LENGTH(x)		TO_DW((((u32)x) << 3))
+#define TO_DW0_MAXPACKET(x)		TO_DW((((u32)x) << 18))
+#define TO_DW0_MULTI(x)			TO_DW((((u32)x) << 29))
+#define TO_DW0_ENDPOINT(x)		TO_DW((((u32)x) << 31))
+/* DW1 */
+#define TO_DW1_DEVICE_ADDR(x)		TO_DW((((u32)x) << 3))
+#define TO_DW1_PID_TOKEN(x)		TO_DW((((u32)x) << 10))
+#define DW1_TRANS_BULK			TO_DW(((u32)2 << 12))
+#define DW1_TRANS_INT			TO_DW(((u32)3 << 12))
+#define DW1_TRANS_SPLIT			TO_DW(((u32)1 << 14))
+#define DW1_SE_USB_LOSPEED		TO_DW(((u32)2 << 16))
+#define TO_DW1_PORT_NUM(x)		TO_DW((((u32)x) << 18))
+#define TO_DW1_HUB_NUM(x)		TO_DW((((u32)x) << 25))
+/* DW2 */
+#define TO_DW2_DATA_START_ADDR(x)	TO_DW((((u32)x) << 8))
+#define TO_DW2_RL(x)			TO_DW(((x) << 25))
+#define FROM_DW2_RL(x)			((TO_U32(x) >> 25) & 0xf)
+/* DW3 */
+#define FROM_DW3_NRBYTESTRANSFERRED(x)		TO_U32((x) & 0x3fff)
+#define FROM_DW3_SCS_NRBYTESTRANSFERRED(x)	TO_U32((x) & 0x07ff)
+#define TO_DW3_NAKCOUNT(x)		TO_DW(((x) << 19))
+#define FROM_DW3_NAKCOUNT(x)		((TO_U32(x) >> 19) & 0xf)
+#define TO_DW3_CERR(x)			TO_DW(((x) << 23))
+#define FROM_DW3_CERR(x)		((TO_U32(x) >> 23) & 0x3)
+#define TO_DW3_DATA_TOGGLE(x)		TO_DW(((x) << 25))
+#define FROM_DW3_DATA_TOGGLE(x)		((TO_U32(x) >> 25) & 0x1)
+#define TO_DW3_PING(x)			TO_DW(((x) << 26))
+#define FROM_DW3_PING(x)		((TO_U32(x) >> 26) & 0x1)
+#define DW3_ERROR_BIT			TO_DW((1 << 28))
+#define DW3_BABBLE_BIT			TO_DW((1 << 29))
+#define DW3_HALT_BIT			TO_DW((1 << 30))
+#define DW3_ACTIVE_BIT			TO_DW((1 << 31))
+#define FROM_DW3_ACTIVE(x)		((TO_U32(x) >> 31) & 0x01)
+
+#define INT_UNDERRUN			(1 << 2)
+#define INT_BABBLE			(1 << 1)
+#define INT_EXACT			(1 << 0)
+
+#define SETUP_PID	(2)
+#define IN_PID		(1)
+#define OUT_PID		(0)
+
+/* Errata 1 */
+#define RL_COUNTER	(0)
+#define NAK_COUNTER	(0)
+#define ERR_COUNTER	(3)
+
+struct isp1760_qtd {
+	u8 packet_type;
+	void *data_buffer;
+	u32 payload_addr;
+
+	/* the rest is HCD-private */
+	struct list_head qtd_list;
+	struct urb *urb;
+	size_t length;
+	size_t actual_length;
+
+	/* QTD_ENQUEUED:	waiting for transfer (inactive) */
+	/* QTD_PAYLOAD_ALLOC:	chip mem has been allocated for payload */
+	/* QTD_XFER_STARTED:	valid ptd has been written to isp176x - only
+				interrupt handler may touch this qtd! */
+	/* QTD_XFER_COMPLETE:	payload has been transferred successfully */
+	/* QTD_RETIRE:		transfer error/abort qtd */
+#define QTD_ENQUEUED		0
+#define QTD_PAYLOAD_ALLOC	1
+#define QTD_XFER_STARTED	2
+#define QTD_XFER_COMPLETE	3
+#define QTD_RETIRE		4
+	u32 status;
+};
+
+/* Queue head, one for each active endpoint */
+struct isp1760_qh {
+	struct list_head qh_list;
+	struct list_head qtd_list;
+	u32 toggle;
+	u32 ping;
+	int slot;
+	int tt_buffer_dirty;	/* See USB2.0 spec section 11.17.5 */
+};
+
+struct urb_listitem {
+	struct list_head urb_list;
+	struct urb *urb;
+};
+
+static const u32 isp176x_hc_portsc1_fields[] = {
+	[PORT_OWNER]		= BIT(13),
+	[PORT_POWER]		= BIT(12),
+	[PORT_LSTATUS]		= BIT(10),
+	[PORT_RESET]		= BIT(8),
+	[PORT_SUSPEND]		= BIT(7),
+	[PORT_RESUME]		= BIT(6),
+	[PORT_PE]		= BIT(2),
+	[PORT_CSC]		= BIT(1),
+	[PORT_CONNECT]		= BIT(0),
+};
+
+/*
+ * Access functions for isp176x registers regmap fields
+ */
+static u32 isp1760_hcd_read(struct usb_hcd *hcd, u32 field)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	return isp1760_field_read(priv->fields, field);
+}
+
+/*
+ * We need, in isp176x, to write directly the values to the portsc1
+ * register so it will make the other values to trigger.
+ */
+static void isp1760_hcd_portsc1_set_clear(struct isp1760_hcd *priv, u32 field,
+					  u32 val)
+{
+	u32 bit = isp176x_hc_portsc1_fields[field];
+	u16 portsc1_reg = priv->is_isp1763 ? ISP1763_HC_PORTSC1 :
+		ISP176x_HC_PORTSC1;
+	u32 port_status = readl(priv->base + portsc1_reg);
+
+	if (val)
+		writel(port_status | bit, priv->base + portsc1_reg);
+	else
+		writel(port_status & ~bit, priv->base + portsc1_reg);
+}
+
+static void isp1760_hcd_write(struct usb_hcd *hcd, u32 field, u32 val)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	if (unlikely((field >= PORT_OWNER && field <= PORT_CONNECT)))
+		return isp1760_hcd_portsc1_set_clear(priv, field, val);
+
+	isp1760_field_write(priv->fields, field, val);
+}
+
+static void isp1760_hcd_set(struct usb_hcd *hcd, u32 field)
+{
+	isp1760_hcd_write(hcd, field, 0xFFFFFFFF);
+}
+
+static void isp1760_hcd_clear(struct usb_hcd *hcd, u32 field)
+{
+	isp1760_hcd_write(hcd, field, 0);
+}
+
+static int isp1760_hcd_set_and_wait(struct usb_hcd *hcd, u32 field,
+				    u32 timeout_us)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 val;
+
+	isp1760_hcd_set(hcd, field);
+
+	return regmap_field_read_poll_timeout(priv->fields[field], val,
+					      val, 0, timeout_us);
+}
+
+static int isp1760_hcd_set_and_wait_swap(struct usb_hcd *hcd, u32 field,
+					 u32 timeout_us)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 val;
+
+	isp1760_hcd_set(hcd, field);
+
+	return regmap_field_read_poll_timeout(priv->fields[field], val,
+					      !val, 0, timeout_us);
+}
+
+static int isp1760_hcd_clear_and_wait(struct usb_hcd *hcd, u32 field,
+				      u32 timeout_us)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 val;
+
+	isp1760_hcd_clear(hcd, field);
+
+	return regmap_field_read_poll_timeout(priv->fields[field], val,
+					      !val, 0, timeout_us);
+}
+
+static bool isp1760_hcd_is_set(struct usb_hcd *hcd, u32 field)
+{
+	return !!isp1760_hcd_read(hcd, field);
+}
+
+static bool isp1760_hcd_ppc_is_set(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	if (priv->is_isp1763)
+		return true;
+
+	return isp1760_hcd_is_set(hcd, HCS_PPC);
+}
+
+static u32 isp1760_hcd_n_ports(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	if (priv->is_isp1763)
+		return 1;
+
+	return isp1760_hcd_read(hcd, HCS_N_PORTS);
+}
+
+/*
+ * Access functions for isp176x memory (offset >= 0x0400).
+ *
+ * bank_reads8() reads memory locations prefetched by an earlier write to
+ * HC_MEMORY_REG (see isp176x datasheet). Unless you want to do fancy multi-
+ * bank optimizations, you should use the more generic mem_read() below.
+ *
+ * For access to ptd memory, use the specialized ptd_read() and ptd_write()
+ * below.
+ *
+ * These functions copy via MMIO data to/from the device. memcpy_{to|from}io()
+ * doesn't quite work because some people have to enforce 32-bit access
+ */
+static void bank_reads8(void __iomem *src_base, u32 src_offset, u32 bank_addr,
+							__u32 *dst, u32 bytes)
+{
+	__u32 __iomem *src;
+	u32 val;
+	__u8 *src_byteptr;
+	__u8 *dst_byteptr;
+
+	src = src_base + (bank_addr | src_offset);
+
+	if (src_offset < PAYLOAD_OFFSET) {
+		while (bytes >= 4) {
+			*dst = readl_relaxed(src);
+			bytes -= 4;
+			src++;
+			dst++;
+		}
+	} else {
+		while (bytes >= 4) {
+			*dst = __raw_readl(src);
+			bytes -= 4;
+			src++;
+			dst++;
+		}
+	}
+
+	if (!bytes)
+		return;
+
+	/* in case we have 3, 2 or 1 by left. The dst buffer may not be fully
+	 * allocated.
+	 */
+	if (src_offset < PAYLOAD_OFFSET)
+		val = readl_relaxed(src);
+	else
+		val = __raw_readl(src);
+
+	dst_byteptr = (void *) dst;
+	src_byteptr = (void *) &val;
+	while (bytes > 0) {
+		*dst_byteptr = *src_byteptr;
+		dst_byteptr++;
+		src_byteptr++;
+		bytes--;
+	}
+}
+
+static void isp1760_mem_read(struct usb_hcd *hcd, u32 src_offset, void *dst,
+			     u32 bytes)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	isp1760_reg_write(priv->regs, ISP176x_HC_MEMORY, src_offset);
+	ndelay(100);
+
+	bank_reads8(priv->base, src_offset, ISP_BANK_0, dst, bytes);
+}
+
+/*
+ * ISP1763 does not have the banks direct host controller memory access,
+ * needs to use the HC_DATA register. Add data read/write according to this,
+ * and also adjust 16bit access.
+ */
+static void isp1763_mem_read(struct usb_hcd *hcd, u16 srcaddr,
+			     u16 *dstptr, u32 bytes)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	/* Write the starting device address to the hcd memory register */
+	isp1760_reg_write(priv->regs, ISP1763_HC_MEMORY, srcaddr);
+	ndelay(100); /* Delay between consecutive access */
+
+	/* As long there are at least 16-bit to read ... */
+	while (bytes >= 2) {
+		*dstptr = __raw_readw(priv->base + ISP1763_HC_DATA);
+		bytes -= 2;
+		dstptr++;
+	}
+
+	/* If there are no more bytes to read, return */
+	if (bytes <= 0)
+		return;
+
+	*((u8 *)dstptr) = (u8)(readw(priv->base + ISP1763_HC_DATA) & 0xFF);
+}
+
+static void mem_read(struct usb_hcd *hcd, u32 src_offset, __u32 *dst,
+		     u32 bytes)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	if (!priv->is_isp1763)
+		return isp1760_mem_read(hcd, src_offset, (u16 *)dst, bytes);
+
+	isp1763_mem_read(hcd, (u16)src_offset, (u16 *)dst, bytes);
+}
+
+static void isp1760_mem_write(void __iomem *dst_base, u32 dst_offset,
+			      __u32 const *src, u32 bytes)
+{
+	__u32 __iomem *dst;
+
+	dst = dst_base + dst_offset;
+
+	if (dst_offset < PAYLOAD_OFFSET) {
+		while (bytes >= 4) {
+			writel_relaxed(*src, dst);
+			bytes -= 4;
+			src++;
+			dst++;
+		}
+	} else {
+		while (bytes >= 4) {
+			__raw_writel(*src, dst);
+			bytes -= 4;
+			src++;
+			dst++;
+		}
+	}
+
+	if (!bytes)
+		return;
+	/* in case we have 3, 2 or 1 bytes left. The buffer is allocated and the
+	 * extra bytes should not be read by the HW.
+	 */
+
+	if (dst_offset < PAYLOAD_OFFSET)
+		writel_relaxed(*src, dst);
+	else
+		__raw_writel(*src, dst);
+}
+
+static void isp1763_mem_write(struct usb_hcd *hcd, u16 dstaddr, u16 *src,
+			      u32 bytes)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	/* Write the starting device address to the hcd memory register */
+	isp1760_reg_write(priv->regs, ISP1763_HC_MEMORY, dstaddr);
+	ndelay(100); /* Delay between consecutive access */
+
+	while (bytes >= 2) {
+		/* Get and write the data; then adjust the data ptr and len */
+		__raw_writew(*src, priv->base + ISP1763_HC_DATA);
+		bytes -= 2;
+		src++;
+	}
+
+	/* If there are no more bytes to process, return */
+	if (bytes <= 0)
+		return;
+
+	/*
+	 * The only way to get here is if there is a single byte left,
+	 * get it and write it to the data reg;
+	 */
+	writew(*((u8 *)src), priv->base + ISP1763_HC_DATA);
+}
+
+static void mem_write(struct usb_hcd *hcd, u32 dst_offset, __u32 *src,
+		      u32 bytes)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	if (!priv->is_isp1763)
+		return isp1760_mem_write(priv->base, dst_offset, src, bytes);
+
+	isp1763_mem_write(hcd, dst_offset, (u16 *)src, bytes);
+}
+
+/*
+ * Read and write ptds. 'ptd_offset' should be one of ISO_PTD_OFFSET,
+ * INT_PTD_OFFSET, and ATL_PTD_OFFSET. 'slot' should be less than 32.
+ */
+static void isp1760_ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
+			     struct ptd *ptd)
+{
+	u16 src_offset = ptd_offset + slot * sizeof(*ptd);
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	isp1760_reg_write(priv->regs, ISP176x_HC_MEMORY, src_offset);
+	ndelay(90);
+
+	bank_reads8(priv->base, src_offset, ISP_BANK_0, (void *)ptd,
+		    sizeof(*ptd));
+}
+
+static void isp1763_ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
+			     struct ptd *ptd)
+{
+	u16 src_offset = ptd_offset + slot * sizeof(*ptd);
+	struct ptd_le32 le32_ptd;
+
+	isp1763_mem_read(hcd, src_offset, (u16 *)&le32_ptd, sizeof(le32_ptd));
+	/* Normalize the data obtained */
+	ptd->dw0 = le32_to_dw(le32_ptd.dw0);
+	ptd->dw1 = le32_to_dw(le32_ptd.dw1);
+	ptd->dw2 = le32_to_dw(le32_ptd.dw2);
+	ptd->dw3 = le32_to_dw(le32_ptd.dw3);
+	ptd->dw4 = le32_to_dw(le32_ptd.dw4);
+	ptd->dw5 = le32_to_dw(le32_ptd.dw5);
+	ptd->dw6 = le32_to_dw(le32_ptd.dw6);
+	ptd->dw7 = le32_to_dw(le32_ptd.dw7);
+}
+
+static void ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
+		     struct ptd *ptd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	if (!priv->is_isp1763)
+		return isp1760_ptd_read(hcd, ptd_offset, slot, ptd);
+
+	isp1763_ptd_read(hcd, ptd_offset, slot, ptd);
+}
+
+static void isp1763_ptd_write(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
+			      struct ptd *cpu_ptd)
+{
+	u16 dst_offset = ptd_offset + slot * sizeof(*cpu_ptd);
+	struct ptd_le32 ptd;
+
+	ptd.dw0 = dw_to_le32(cpu_ptd->dw0);
+	ptd.dw1 = dw_to_le32(cpu_ptd->dw1);
+	ptd.dw2 = dw_to_le32(cpu_ptd->dw2);
+	ptd.dw3 = dw_to_le32(cpu_ptd->dw3);
+	ptd.dw4 = dw_to_le32(cpu_ptd->dw4);
+	ptd.dw5 = dw_to_le32(cpu_ptd->dw5);
+	ptd.dw6 = dw_to_le32(cpu_ptd->dw6);
+	ptd.dw7 = dw_to_le32(cpu_ptd->dw7);
+
+	isp1763_mem_write(hcd, dst_offset,  (u16 *)&ptd.dw0,
+			  8 * sizeof(ptd.dw0));
+}
+
+static void isp1760_ptd_write(void __iomem *base, u32 ptd_offset, u32 slot,
+			      struct ptd *ptd)
+{
+	u32 dst_offset = ptd_offset + slot * sizeof(*ptd);
+
+	/*
+	 * Make sure dw0 gets written last (after other dw's and after payload)
+	 *  since it contains the enable bit
+	 */
+	isp1760_mem_write(base, dst_offset + sizeof(ptd->dw0),
+			  (__force u32 *)&ptd->dw1, 7 * sizeof(ptd->dw1));
+	wmb();
+	isp1760_mem_write(base, dst_offset, (__force u32 *)&ptd->dw0,
+			  sizeof(ptd->dw0));
+}
+
+static void ptd_write(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
+		      struct ptd *ptd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	if (!priv->is_isp1763)
+		return isp1760_ptd_write(priv->base, ptd_offset, slot, ptd);
+
+	isp1763_ptd_write(hcd, ptd_offset, slot, ptd);
+}
+
+/* memory management of the 60kb on the chip from 0x1000 to 0xffff */
+static void init_memory(struct isp1760_hcd *priv)
+{
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
+	int i, j, curr;
+	u32 payload_addr;
+
+	payload_addr = PAYLOAD_OFFSET;
+
+	for (i = 0, curr = 0; i < ARRAY_SIZE(mem->blocks); i++, curr += j) {
+		for (j = 0; j < mem->blocks[i]; j++) {
+			priv->memory_pool[curr + j].start = payload_addr;
+			priv->memory_pool[curr + j].size = mem->blocks_size[i];
+			priv->memory_pool[curr + j].free = 1;
+			payload_addr += priv->memory_pool[curr + j].size;
+		}
+	}
+
+	WARN_ON(payload_addr - priv->memory_pool[0].start >
+		mem->payload_area_size);
+}
+
+static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
+	int i;
+
+	WARN_ON(qtd->payload_addr);
+
+	if (!qtd->length)
+		return;
+
+	for (i = 0; i < mem->payload_blocks; i++) {
+		if (priv->memory_pool[i].size >= qtd->length &&
+				priv->memory_pool[i].free) {
+			priv->memory_pool[i].free = 0;
+			qtd->payload_addr = priv->memory_pool[i].start;
+			return;
+		}
+	}
+}
+
+static void free_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
+	int i;
+
+	if (!qtd->payload_addr)
+		return;
+
+	for (i = 0; i < mem->payload_blocks; i++) {
+		if (priv->memory_pool[i].start == qtd->payload_addr) {
+			WARN_ON(priv->memory_pool[i].free);
+			priv->memory_pool[i].free = 1;
+			qtd->payload_addr = 0;
+			return;
+		}
+	}
+
+	dev_err(hcd->self.controller, "%s: Invalid pointer: %08x\n",
+						__func__, qtd->payload_addr);
+	WARN_ON(1);
+	qtd->payload_addr = 0;
+}
+
+/* reset a non-running (STS_HALT == 1) controller */
+static int ehci_reset(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	hcd->state = HC_STATE_HALT;
+	priv->next_statechange = jiffies;
+
+	return isp1760_hcd_set_and_wait_swap(hcd, CMD_RESET, 250 * 1000);
+}
+
+static struct isp1760_qh *qh_alloc(gfp_t flags)
+{
+	struct isp1760_qh *qh;
+
+	qh = kmem_cache_zalloc(qh_cachep, flags);
+	if (!qh)
+		return NULL;
+
+	INIT_LIST_HEAD(&qh->qh_list);
+	INIT_LIST_HEAD(&qh->qtd_list);
+	qh->slot = -1;
+
+	return qh;
+}
+
+static void qh_free(struct isp1760_qh *qh)
+{
+	WARN_ON(!list_empty(&qh->qtd_list));
+	WARN_ON(qh->slot > -1);
+	kmem_cache_free(qh_cachep, qh);
+}
+
+/* one-time init, only for memory state */
+static int priv_init(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 isoc_cache;
+	u32 isoc_thres;
+	int i;
+
+	spin_lock_init(&priv->lock);
+
+	for (i = 0; i < QH_END; i++)
+		INIT_LIST_HEAD(&priv->qh_list[i]);
+
+	/*
+	 * hw default: 1K periodic list heads, one per frame.
+	 * periodic_size can shrink by USBCMD update if hcc_params allows.
+	 */
+	priv->periodic_size = DEFAULT_I_TDPS;
+
+	if (priv->is_isp1763) {
+		priv->i_thresh = 2;
+		return 0;
+	}
+
+	/* controllers may cache some of the periodic schedule ... */
+	isoc_cache = isp1760_hcd_read(hcd, HCC_ISOC_CACHE);
+	isoc_thres = isp1760_hcd_read(hcd, HCC_ISOC_THRES);
+
+	/* full frame cache */
+	if (isoc_cache)
+		priv->i_thresh = 8;
+	else /* N microframes cached */
+		priv->i_thresh = 2 + isoc_thres;
+
+	return 0;
+}
+
+static int isp1760_hc_setup(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 atx_reset;
+	int result;
+	u32 scratch;
+	u32 pattern;
+
+	if (priv->is_isp1763)
+		pattern = 0xcafe;
+	else
+		pattern = 0xdeadcafe;
+
+	isp1760_hcd_write(hcd, HC_SCRATCH, pattern);
+
+	/*
+	 * we do not care about the read value here we just want to
+	 * change bus pattern.
+	 */
+	isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH);
+	scratch = isp1760_hcd_read(hcd, HC_SCRATCH);
+	if (scratch != pattern) {
+		dev_err(hcd->self.controller, "Scratch test failed. 0x%08x\n",
+			scratch);
+		return -ENODEV;
+	}
+
+	/*
+	 * The RESET_HC bit in the SW_RESET register is supposed to reset the
+	 * host controller without touching the CPU interface registers, but at
+	 * least on the ISP1761 it seems to behave as the RESET_ALL bit and
+	 * reset the whole device. We thus can't use it here, so let's reset
+	 * the host controller through the EHCI USB Command register. The device
+	 * has been reset in core code anyway, so this shouldn't matter.
+	 */
+	isp1760_hcd_clear(hcd, ISO_BUF_FILL);
+	isp1760_hcd_clear(hcd, INT_BUF_FILL);
+	isp1760_hcd_clear(hcd, ATL_BUF_FILL);
+
+	isp1760_hcd_set(hcd, HC_ATL_PTD_SKIPMAP);
+	isp1760_hcd_set(hcd, HC_INT_PTD_SKIPMAP);
+	isp1760_hcd_set(hcd, HC_ISO_PTD_SKIPMAP);
+
+	result = ehci_reset(hcd);
+	if (result)
+		return result;
+
+	/* Step 11 passed */
+
+	/* ATL reset */
+	if (priv->is_isp1763)
+		atx_reset = SW_RESET_RESET_ATX;
+	else
+		atx_reset = ALL_ATX_RESET;
+
+	isp1760_hcd_set(hcd, atx_reset);
+	mdelay(10);
+	isp1760_hcd_clear(hcd, atx_reset);
+
+	if (priv->is_isp1763) {
+		isp1760_hcd_set(hcd, HW_OTG_DISABLE);
+		isp1760_hcd_set(hcd, HW_SW_SEL_HC_DC_CLEAR);
+		isp1760_hcd_set(hcd, HW_HC_2_DIS_CLEAR);
+		mdelay(10);
+
+		isp1760_hcd_set(hcd, HW_INTF_LOCK);
+	}
+
+	isp1760_hcd_set(hcd, HC_INT_IRQ_ENABLE);
+	isp1760_hcd_set(hcd, HC_ATL_IRQ_ENABLE);
+
+	return priv_init(hcd);
+}
+
+static u32 base_to_chip(u32 base)
+{
+	return ((base - 0x400) >> 3);
+}
+
+static int last_qtd_of_urb(struct isp1760_qtd *qtd, struct isp1760_qh *qh)
+{
+	struct urb *urb;
+
+	if (list_is_last(&qtd->qtd_list, &qh->qtd_list))
+		return 1;
+
+	urb = qtd->urb;
+	qtd = list_entry(qtd->qtd_list.next, typeof(*qtd), qtd_list);
+	return (qtd->urb != urb);
+}
+
+/* magic numbers that can affect system performance */
+#define	EHCI_TUNE_CERR		3	/* 0-3 qtd retries; 0 == don't stop */
+#define	EHCI_TUNE_RL_HS		4	/* nak throttle; see 4.9 */
+#define	EHCI_TUNE_RL_TT		0
+#define	EHCI_TUNE_MULT_HS	1	/* 1-3 transactions/uframe; 4.10.3 */
+#define	EHCI_TUNE_MULT_TT	1
+#define	EHCI_TUNE_FLS		2	/* (small) 256 frame schedule */
+
+static void create_ptd_atl(struct isp1760_qh *qh,
+			struct isp1760_qtd *qtd, struct ptd *ptd)
+{
+	u32 maxpacket;
+	u32 multi;
+	u32 rl = RL_COUNTER;
+	u32 nak = NAK_COUNTER;
+
+	memset(ptd, 0, sizeof(*ptd));
+
+	/* according to 3.6.2, max packet len can not be > 0x400 */
+	maxpacket = usb_maxpacket(qtd->urb->dev, qtd->urb->pipe);
+	multi =  1 + ((maxpacket >> 11) & 0x3);
+	maxpacket &= 0x7ff;
+
+	/* DW0 */
+	ptd->dw0 = DW0_VALID_BIT;
+	ptd->dw0 |= TO_DW0_LENGTH(qtd->length);
+	ptd->dw0 |= TO_DW0_MAXPACKET(maxpacket);
+	ptd->dw0 |= TO_DW0_ENDPOINT(usb_pipeendpoint(qtd->urb->pipe));
+
+	/* DW1 */
+	ptd->dw1 = TO_DW((usb_pipeendpoint(qtd->urb->pipe) >> 1));
+	ptd->dw1 |= TO_DW1_DEVICE_ADDR(usb_pipedevice(qtd->urb->pipe));
+	ptd->dw1 |= TO_DW1_PID_TOKEN(qtd->packet_type);
+
+	if (usb_pipebulk(qtd->urb->pipe))
+		ptd->dw1 |= DW1_TRANS_BULK;
+	else if  (usb_pipeint(qtd->urb->pipe))
+		ptd->dw1 |= DW1_TRANS_INT;
+
+	if (qtd->urb->dev->speed != USB_SPEED_HIGH) {
+		/* split transaction */
+
+		ptd->dw1 |= DW1_TRANS_SPLIT;
+		if (qtd->urb->dev->speed == USB_SPEED_LOW)
+			ptd->dw1 |= DW1_SE_USB_LOSPEED;
+
+		ptd->dw1 |= TO_DW1_PORT_NUM(qtd->urb->dev->ttport);
+		ptd->dw1 |= TO_DW1_HUB_NUM(qtd->urb->dev->tt->hub->devnum);
+
+		/* SE bit for Split INT transfers */
+		if (usb_pipeint(qtd->urb->pipe) &&
+				(qtd->urb->dev->speed == USB_SPEED_LOW))
+			ptd->dw1 |= DW1_SE_USB_LOSPEED;
+
+		rl = 0;
+		nak = 0;
+	} else {
+		ptd->dw0 |= TO_DW0_MULTI(multi);
+		if (usb_pipecontrol(qtd->urb->pipe) ||
+						usb_pipebulk(qtd->urb->pipe))
+			ptd->dw3 |= TO_DW3_PING(qh->ping);
+	}
+	/* DW2 */
+	ptd->dw2 = 0;
+	ptd->dw2 |= TO_DW2_DATA_START_ADDR(base_to_chip(qtd->payload_addr));
+	ptd->dw2 |= TO_DW2_RL(rl);
+
+	/* DW3 */
+	ptd->dw3 |= TO_DW3_NAKCOUNT(nak);
+	ptd->dw3 |= TO_DW3_DATA_TOGGLE(qh->toggle);
+	if (usb_pipecontrol(qtd->urb->pipe)) {
+		if (qtd->data_buffer == qtd->urb->setup_packet)
+			ptd->dw3 &= ~TO_DW3_DATA_TOGGLE(1);
+		else if (last_qtd_of_urb(qtd, qh))
+			ptd->dw3 |= TO_DW3_DATA_TOGGLE(1);
+	}
+
+	ptd->dw3 |= DW3_ACTIVE_BIT;
+	/* Cerr */
+	ptd->dw3 |= TO_DW3_CERR(ERR_COUNTER);
+}
+
+static void transform_add_int(struct isp1760_qh *qh,
+			struct isp1760_qtd *qtd, struct ptd *ptd)
+{
+	u32 usof;
+	u32 period;
+
+	/*
+	 * Most of this is guessing. ISP1761 datasheet is quite unclear, and
+	 * the algorithm from the original Philips driver code, which was
+	 * pretty much used in this driver before as well, is quite horrendous
+	 * and, i believe, incorrect. The code below follows the datasheet and
+	 * USB2.0 spec as far as I can tell, and plug/unplug seems to be much
+	 * more reliable this way (fingers crossed...).
+	 */
+
+	if (qtd->urb->dev->speed == USB_SPEED_HIGH) {
+		/* urb->interval is in units of microframes (1/8 ms) */
+		period = qtd->urb->interval >> 3;
+
+		if (qtd->urb->interval > 4)
+			usof = 0x01; /* One bit set =>
+						interval 1 ms * uFrame-match */
+		else if (qtd->urb->interval > 2)
+			usof = 0x22; /* Two bits set => interval 1/2 ms */
+		else if (qtd->urb->interval > 1)
+			usof = 0x55; /* Four bits set => interval 1/4 ms */
+		else
+			usof = 0xff; /* All bits set => interval 1/8 ms */
+	} else {
+		/* urb->interval is in units of frames (1 ms) */
+		period = qtd->urb->interval;
+		usof = 0x0f;		/* Execute Start Split on any of the
+					   four first uFrames */
+
+		/*
+		 * First 8 bits in dw5 is uSCS and "specifies which uSOF the
+		 * complete split needs to be sent. Valid only for IN." Also,
+		 * "All bits can be set to one for every transfer." (p 82,
+		 * ISP1761 data sheet.) 0x1c is from Philips driver. Where did
+		 * that number come from? 0xff seems to work fine...
+		 */
+		/* ptd->dw5 = 0x1c; */
+		ptd->dw5 = TO_DW(0xff); /* Execute Complete Split on any uFrame */
+	}
+
+	period = period >> 1;/* Ensure equal or shorter period than requested */
+	period &= 0xf8; /* Mask off too large values and lowest unused 3 bits */
+
+	ptd->dw2 |= TO_DW(period);
+	ptd->dw4 = TO_DW(usof);
+}
+
+static void create_ptd_int(struct isp1760_qh *qh,
+			struct isp1760_qtd *qtd, struct ptd *ptd)
+{
+	create_ptd_atl(qh, qtd, ptd);
+	transform_add_int(qh, qtd, ptd);
+}
+
+static void isp1760_urb_done(struct usb_hcd *hcd, struct urb *urb)
+__releases(priv->lock)
+__acquires(priv->lock)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	if (!urb->unlinked) {
+		if (urb->status == -EINPROGRESS)
+			urb->status = 0;
+	}
+
+	if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) {
+		void *ptr;
+		for (ptr = urb->transfer_buffer;
+		     ptr < urb->transfer_buffer + urb->transfer_buffer_length;
+		     ptr += PAGE_SIZE)
+			flush_dcache_page(virt_to_page(ptr));
+	}
+
+	/* complete() can reenter this HCD */
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+	spin_unlock(&priv->lock);
+	usb_hcd_giveback_urb(hcd, urb, urb->status);
+	spin_lock(&priv->lock);
+}
+
+static struct isp1760_qtd *qtd_alloc(gfp_t flags, struct urb *urb,
+								u8 packet_type)
+{
+	struct isp1760_qtd *qtd;
+
+	qtd = kmem_cache_zalloc(qtd_cachep, flags);
+	if (!qtd)
+		return NULL;
+
+	INIT_LIST_HEAD(&qtd->qtd_list);
+	qtd->urb = urb;
+	qtd->packet_type = packet_type;
+	qtd->status = QTD_ENQUEUED;
+	qtd->actual_length = 0;
+
+	return qtd;
+}
+
+static void qtd_free(struct isp1760_qtd *qtd)
+{
+	WARN_ON(qtd->payload_addr);
+	kmem_cache_free(qtd_cachep, qtd);
+}
+
+static void start_bus_transfer(struct usb_hcd *hcd, u32 ptd_offset, int slot,
+				struct isp1760_slotinfo *slots,
+				struct isp1760_qtd *qtd, struct isp1760_qh *qh,
+				struct ptd *ptd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
+	int skip_map;
+
+	WARN_ON((slot < 0) || (slot > mem->slot_num - 1));
+	WARN_ON(qtd->length && !qtd->payload_addr);
+	WARN_ON(slots[slot].qtd);
+	WARN_ON(slots[slot].qh);
+	WARN_ON(qtd->status != QTD_PAYLOAD_ALLOC);
+
+	if (priv->is_isp1763)
+		ndelay(100);
+
+	/* Make sure done map has not triggered from some unlinked transfer */
+	if (ptd_offset == ATL_PTD_OFFSET) {
+		skip_map = isp1760_hcd_read(hcd, HC_ATL_PTD_SKIPMAP);
+		isp1760_hcd_write(hcd, HC_ATL_PTD_SKIPMAP,
+				  skip_map | (1 << slot));
+		priv->atl_done_map |= isp1760_hcd_read(hcd, HC_ATL_PTD_DONEMAP);
+		priv->atl_done_map &= ~(1 << slot);
+	} else {
+		skip_map = isp1760_hcd_read(hcd, HC_INT_PTD_SKIPMAP);
+		isp1760_hcd_write(hcd, HC_INT_PTD_SKIPMAP,
+				  skip_map | (1 << slot));
+		priv->int_done_map |= isp1760_hcd_read(hcd, HC_INT_PTD_DONEMAP);
+		priv->int_done_map &= ~(1 << slot);
+	}
+
+	skip_map &= ~(1 << slot);
+	qh->slot = slot;
+	qtd->status = QTD_XFER_STARTED;
+	slots[slot].timestamp = jiffies;
+	slots[slot].qtd = qtd;
+	slots[slot].qh = qh;
+	ptd_write(hcd, ptd_offset, slot, ptd);
+
+	if (ptd_offset == ATL_PTD_OFFSET)
+		isp1760_hcd_write(hcd, HC_ATL_PTD_SKIPMAP, skip_map);
+	else
+		isp1760_hcd_write(hcd, HC_INT_PTD_SKIPMAP, skip_map);
+}
+
+static int is_short_bulk(struct isp1760_qtd *qtd)
+{
+	return (usb_pipebulk(qtd->urb->pipe) &&
+					(qtd->actual_length < qtd->length));
+}
+
+static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh,
+						struct list_head *urb_list)
+{
+	struct isp1760_qtd *qtd, *qtd_next;
+	struct urb_listitem *urb_listitem;
+	int last_qtd;
+
+	list_for_each_entry_safe(qtd, qtd_next, &qh->qtd_list, qtd_list) {
+		if (qtd->status < QTD_XFER_COMPLETE)
+			break;
+
+		last_qtd = last_qtd_of_urb(qtd, qh);
+
+		if ((!last_qtd) && (qtd->status == QTD_RETIRE))
+			qtd_next->status = QTD_RETIRE;
+
+		if (qtd->status == QTD_XFER_COMPLETE) {
+			if (qtd->actual_length) {
+				switch (qtd->packet_type) {
+				case IN_PID:
+					mem_read(hcd, qtd->payload_addr,
+						 qtd->data_buffer,
+						 qtd->actual_length);
+					fallthrough;
+				case OUT_PID:
+					qtd->urb->actual_length +=
+							qtd->actual_length;
+					fallthrough;
+				case SETUP_PID:
+					break;
+				}
+			}
+
+			if (is_short_bulk(qtd)) {
+				if (qtd->urb->transfer_flags & URB_SHORT_NOT_OK)
+					qtd->urb->status = -EREMOTEIO;
+				if (!last_qtd)
+					qtd_next->status = QTD_RETIRE;
+			}
+		}
+
+		if (qtd->payload_addr)
+			free_mem(hcd, qtd);
+
+		if (last_qtd) {
+			if ((qtd->status == QTD_RETIRE) &&
+					(qtd->urb->status == -EINPROGRESS))
+				qtd->urb->status = -EPIPE;
+			/* Defer calling of urb_done() since it releases lock */
+			urb_listitem = kmem_cache_zalloc(urb_listitem_cachep,
+								GFP_ATOMIC);
+			if (unlikely(!urb_listitem))
+				break; /* Try again on next call */
+			urb_listitem->urb = qtd->urb;
+			list_add_tail(&urb_listitem->urb_list, urb_list);
+		}
+
+		list_del(&qtd->qtd_list);
+		qtd_free(qtd);
+	}
+}
+
+#define ENQUEUE_DEPTH	2
+static void enqueue_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
+	int slot_num = mem->slot_num;
+	int ptd_offset;
+	struct isp1760_slotinfo *slots;
+	int curr_slot, free_slot;
+	int n;
+	struct ptd ptd;
+	struct isp1760_qtd *qtd;
+
+	if (unlikely(list_empty(&qh->qtd_list))) {
+		WARN_ON(1);
+		return;
+	}
+
+	/* Make sure this endpoint's TT buffer is clean before queueing ptds */
+	if (qh->tt_buffer_dirty)
+		return;
+
+	if (usb_pipeint(list_entry(qh->qtd_list.next, struct isp1760_qtd,
+							qtd_list)->urb->pipe)) {
+		ptd_offset = INT_PTD_OFFSET;
+		slots = priv->int_slots;
+	} else {
+		ptd_offset = ATL_PTD_OFFSET;
+		slots = priv->atl_slots;
+	}
+
+	free_slot = -1;
+	for (curr_slot = 0; curr_slot < slot_num; curr_slot++) {
+		if ((free_slot == -1) && (slots[curr_slot].qtd == NULL))
+			free_slot = curr_slot;
+		if (slots[curr_slot].qh == qh)
+			break;
+	}
+
+	n = 0;
+	list_for_each_entry(qtd, &qh->qtd_list, qtd_list) {
+		if (qtd->status == QTD_ENQUEUED) {
+			WARN_ON(qtd->payload_addr);
+			alloc_mem(hcd, qtd);
+			if ((qtd->length) && (!qtd->payload_addr))
+				break;
+
+			if (qtd->length && (qtd->packet_type == SETUP_PID ||
+					    qtd->packet_type == OUT_PID)) {
+				mem_write(hcd, qtd->payload_addr,
+					  qtd->data_buffer, qtd->length);
+			}
+
+			qtd->status = QTD_PAYLOAD_ALLOC;
+		}
+
+		if (qtd->status == QTD_PAYLOAD_ALLOC) {
+/*
+			if ((curr_slot > 31) && (free_slot == -1))
+				dev_dbg(hcd->self.controller, "%s: No slot "
+					"available for transfer\n", __func__);
+*/
+			/* Start xfer for this endpoint if not already done */
+			if ((curr_slot > slot_num - 1) && (free_slot > -1)) {
+				if (usb_pipeint(qtd->urb->pipe))
+					create_ptd_int(qh, qtd, &ptd);
+				else
+					create_ptd_atl(qh, qtd, &ptd);
+
+				start_bus_transfer(hcd, ptd_offset, free_slot,
+							slots, qtd, qh, &ptd);
+				curr_slot = free_slot;
+			}
+
+			n++;
+			if (n >= ENQUEUE_DEPTH)
+				break;
+		}
+	}
+}
+
+static void schedule_ptds(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv;
+	struct isp1760_qh *qh, *qh_next;
+	struct list_head *ep_queue;
+	LIST_HEAD(urb_list);
+	struct urb_listitem *urb_listitem, *urb_listitem_next;
+	int i;
+
+	if (!hcd) {
+		WARN_ON(1);
+		return;
+	}
+
+	priv = hcd_to_priv(hcd);
+
+	/*
+	 * check finished/retired xfers, transfer payloads, call urb_done()
+	 */
+	for (i = 0; i < QH_END; i++) {
+		ep_queue = &priv->qh_list[i];
+		list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list) {
+			collect_qtds(hcd, qh, &urb_list);
+			if (list_empty(&qh->qtd_list))
+				list_del(&qh->qh_list);
+		}
+	}
+
+	list_for_each_entry_safe(urb_listitem, urb_listitem_next, &urb_list,
+								urb_list) {
+		isp1760_urb_done(hcd, urb_listitem->urb);
+		kmem_cache_free(urb_listitem_cachep, urb_listitem);
+	}
+
+	/*
+	 * Schedule packets for transfer.
+	 *
+	 * According to USB2.0 specification:
+	 *
+	 * 1st prio: interrupt xfers, up to 80 % of bandwidth
+	 * 2nd prio: control xfers
+	 * 3rd prio: bulk xfers
+	 *
+	 * ... but let's use a simpler scheme here (mostly because ISP1761 doc
+	 * is very unclear on how to prioritize traffic):
+	 *
+	 * 1) Enqueue any queued control transfers, as long as payload chip mem
+	 *    and PTD ATL slots are available.
+	 * 2) Enqueue any queued INT transfers, as long as payload chip mem
+	 *    and PTD INT slots are available.
+	 * 3) Enqueue any queued bulk transfers, as long as payload chip mem
+	 *    and PTD ATL slots are available.
+	 *
+	 * Use double buffering (ENQUEUE_DEPTH==2) as a compromise between
+	 * conservation of chip mem and performance.
+	 *
+	 * I'm sure this scheme could be improved upon!
+	 */
+	for (i = 0; i < QH_END; i++) {
+		ep_queue = &priv->qh_list[i];
+		list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list)
+			enqueue_qtds(hcd, qh);
+	}
+}
+
+#define PTD_STATE_QTD_DONE	1
+#define PTD_STATE_QTD_RELOAD	2
+#define PTD_STATE_URB_RETIRE	3
+
+static int check_int_transfer(struct usb_hcd *hcd, struct ptd *ptd,
+								struct urb *urb)
+{
+	u32 dw4;
+	int i;
+
+	dw4 = TO_U32(ptd->dw4);
+	dw4 >>= 8;
+
+	/* FIXME: ISP1761 datasheet does not say what to do with these. Do we
+	   need to handle these errors? Is it done in hardware? */
+
+	if (ptd->dw3 & DW3_HALT_BIT) {
+
+		urb->status = -EPROTO; /* Default unknown error */
+
+		for (i = 0; i < 8; i++) {
+			switch (dw4 & 0x7) {
+			case INT_UNDERRUN:
+				dev_dbg(hcd->self.controller, "%s: underrun "
+						"during uFrame %d\n",
+						__func__, i);
+				urb->status = -ECOMM; /* Could not write data */
+				break;
+			case INT_EXACT:
+				dev_dbg(hcd->self.controller, "%s: transaction "
+						"error during uFrame %d\n",
+						__func__, i);
+				urb->status = -EPROTO; /* timeout, bad CRC, PID
+							  error etc. */
+				break;
+			case INT_BABBLE:
+				dev_dbg(hcd->self.controller, "%s: babble "
+						"error during uFrame %d\n",
+						__func__, i);
+				urb->status = -EOVERFLOW;
+				break;
+			}
+			dw4 >>= 3;
+		}
+
+		return PTD_STATE_URB_RETIRE;
+	}
+
+	return PTD_STATE_QTD_DONE;
+}
+
+static int check_atl_transfer(struct usb_hcd *hcd, struct ptd *ptd,
+								struct urb *urb)
+{
+	WARN_ON(!ptd);
+	if (ptd->dw3 & DW3_HALT_BIT) {
+		if (ptd->dw3 & DW3_BABBLE_BIT)
+			urb->status = -EOVERFLOW;
+		else if (FROM_DW3_CERR(ptd->dw3))
+			urb->status = -EPIPE;  /* Stall */
+		else
+			urb->status = -EPROTO; /* Unknown */
+/*
+		dev_dbg(hcd->self.controller, "%s: ptd error:\n"
+			"        dw0: %08x dw1: %08x dw2: %08x dw3: %08x\n"
+			"        dw4: %08x dw5: %08x dw6: %08x dw7: %08x\n",
+			__func__,
+			ptd->dw0, ptd->dw1, ptd->dw2, ptd->dw3,
+			ptd->dw4, ptd->dw5, ptd->dw6, ptd->dw7);
+*/
+		return PTD_STATE_URB_RETIRE;
+	}
+
+	if ((ptd->dw3 & DW3_ERROR_BIT) && (ptd->dw3 & DW3_ACTIVE_BIT)) {
+		/* Transfer Error, *but* active and no HALT -> reload */
+		dev_dbg(hcd->self.controller, "PID error; reloading ptd\n");
+		return PTD_STATE_QTD_RELOAD;
+	}
+
+	if (!FROM_DW3_NAKCOUNT(ptd->dw3) && (ptd->dw3 & DW3_ACTIVE_BIT)) {
+		/*
+		 * NAKs are handled in HW by the chip. Usually if the
+		 * device is not able to send data fast enough.
+		 * This happens mostly on slower hardware.
+		 */
+		return PTD_STATE_QTD_RELOAD;
+	}
+
+	return PTD_STATE_QTD_DONE;
+}
+
+static void handle_done_ptds(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	struct ptd ptd;
+	struct isp1760_qh *qh;
+	int slot;
+	int state;
+	struct isp1760_slotinfo *slots;
+	u32 ptd_offset;
+	struct isp1760_qtd *qtd;
+	int modified;
+	int skip_map;
+
+	skip_map = isp1760_hcd_read(hcd, HC_INT_PTD_SKIPMAP);
+	priv->int_done_map &= ~skip_map;
+	skip_map = isp1760_hcd_read(hcd, HC_ATL_PTD_SKIPMAP);
+	priv->atl_done_map &= ~skip_map;
+
+	modified = priv->int_done_map || priv->atl_done_map;
+
+	while (priv->int_done_map || priv->atl_done_map) {
+		if (priv->int_done_map) {
+			/* INT ptd */
+			slot = __ffs(priv->int_done_map);
+			priv->int_done_map &= ~(1 << slot);
+			slots = priv->int_slots;
+			/* This should not trigger, and could be removed if
+			   noone have any problems with it triggering: */
+			if (!slots[slot].qh) {
+				WARN_ON(1);
+				continue;
+			}
+			ptd_offset = INT_PTD_OFFSET;
+			ptd_read(hcd, INT_PTD_OFFSET, slot, &ptd);
+			state = check_int_transfer(hcd, &ptd,
+							slots[slot].qtd->urb);
+		} else {
+			/* ATL ptd */
+			slot = __ffs(priv->atl_done_map);
+			priv->atl_done_map &= ~(1 << slot);
+			slots = priv->atl_slots;
+			/* This should not trigger, and could be removed if
+			   noone have any problems with it triggering: */
+			if (!slots[slot].qh) {
+				WARN_ON(1);
+				continue;
+			}
+			ptd_offset = ATL_PTD_OFFSET;
+			ptd_read(hcd, ATL_PTD_OFFSET, slot, &ptd);
+			state = check_atl_transfer(hcd, &ptd,
+							slots[slot].qtd->urb);
+		}
+
+		qtd = slots[slot].qtd;
+		slots[slot].qtd = NULL;
+		qh = slots[slot].qh;
+		slots[slot].qh = NULL;
+		qh->slot = -1;
+
+		WARN_ON(qtd->status != QTD_XFER_STARTED);
+
+		switch (state) {
+		case PTD_STATE_QTD_DONE:
+			if ((usb_pipeint(qtd->urb->pipe)) &&
+				       (qtd->urb->dev->speed != USB_SPEED_HIGH))
+				qtd->actual_length =
+				       FROM_DW3_SCS_NRBYTESTRANSFERRED(ptd.dw3);
+			else
+				qtd->actual_length =
+					FROM_DW3_NRBYTESTRANSFERRED(ptd.dw3);
+
+			qtd->status = QTD_XFER_COMPLETE;
+			if (list_is_last(&qtd->qtd_list, &qh->qtd_list) ||
+			    is_short_bulk(qtd))
+				qtd = NULL;
+			else
+				qtd = list_entry(qtd->qtd_list.next,
+							typeof(*qtd), qtd_list);
+
+			qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3);
+			qh->ping = FROM_DW3_PING(ptd.dw3);
+			break;
+
+		case PTD_STATE_QTD_RELOAD: /* QTD_RETRY, for atls only */
+			qtd->status = QTD_PAYLOAD_ALLOC;
+			ptd.dw0 |= DW0_VALID_BIT;
+			/* RL counter = ERR counter */
+			ptd.dw3 &= ~TO_DW3_NAKCOUNT(0xf);
+			ptd.dw3 |= TO_DW3_NAKCOUNT(FROM_DW2_RL(ptd.dw2));
+			ptd.dw3 &= ~TO_DW3_CERR(3);
+			ptd.dw3 |= TO_DW3_CERR(ERR_COUNTER);
+			qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3);
+			qh->ping = FROM_DW3_PING(ptd.dw3);
+			break;
+
+		case PTD_STATE_URB_RETIRE:
+			qtd->status = QTD_RETIRE;
+			if ((qtd->urb->dev->speed != USB_SPEED_HIGH) &&
+					(qtd->urb->status != -EPIPE) &&
+					(qtd->urb->status != -EREMOTEIO)) {
+				qh->tt_buffer_dirty = 1;
+				if (usb_hub_clear_tt_buffer(qtd->urb))
+					/* Clear failed; let's hope things work
+					   anyway */
+					qh->tt_buffer_dirty = 0;
+			}
+			qtd = NULL;
+			qh->toggle = 0;
+			qh->ping = 0;
+			break;
+
+		default:
+			WARN_ON(1);
+			continue;
+		}
+
+		if (qtd && (qtd->status == QTD_PAYLOAD_ALLOC)) {
+			if (slots == priv->int_slots) {
+				if (state == PTD_STATE_QTD_RELOAD)
+					dev_err(hcd->self.controller,
+						"%s: PTD_STATE_QTD_RELOAD on "
+						"interrupt packet\n", __func__);
+				if (state != PTD_STATE_QTD_RELOAD)
+					create_ptd_int(qh, qtd, &ptd);
+			} else {
+				if (state != PTD_STATE_QTD_RELOAD)
+					create_ptd_atl(qh, qtd, &ptd);
+			}
+
+			start_bus_transfer(hcd, ptd_offset, slot, slots, qtd,
+				qh, &ptd);
+		}
+	}
+
+	if (modified)
+		schedule_ptds(hcd);
+}
+
+static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	irqreturn_t irqret = IRQ_NONE;
+	u32 int_reg;
+	u32 imask;
+
+	spin_lock(&priv->lock);
+
+	if (!(hcd->state & HC_STATE_RUNNING))
+		goto leave;
+
+	imask = isp1760_hcd_read(hcd, HC_INTERRUPT);
+	if (unlikely(!imask))
+		goto leave;
+
+	int_reg = priv->is_isp1763 ? ISP1763_HC_INTERRUPT :
+		ISP176x_HC_INTERRUPT;
+	isp1760_reg_write(priv->regs, int_reg, imask);
+
+	priv->int_done_map |= isp1760_hcd_read(hcd, HC_INT_PTD_DONEMAP);
+	priv->atl_done_map |= isp1760_hcd_read(hcd, HC_ATL_PTD_DONEMAP);
+
+	handle_done_ptds(hcd);
+
+	irqret = IRQ_HANDLED;
+
+leave:
+	spin_unlock(&priv->lock);
+
+	return irqret;
+}
+
+/*
+ * Workaround for problem described in chip errata 2:
+ *
+ * Sometimes interrupts are not generated when ATL (not INT?) completion occurs.
+ * One solution suggested in the errata is to use SOF interrupts _instead_of_
+ * ATL done interrupts (the "instead of" might be important since it seems
+ * enabling ATL interrupts also causes the chip to sometimes - rarely - "forget"
+ * to set the PTD's done bit in addition to not generating an interrupt!).
+ *
+ * So if we use SOF + ATL interrupts, we sometimes get stale PTDs since their
+ * done bit is not being set. This is bad - it blocks the endpoint until reboot.
+ *
+ * If we use SOF interrupts only, we get latency between ptd completion and the
+ * actual handling. This is very noticeable in testusb runs which takes several
+ * minutes longer without ATL interrupts.
+ *
+ * A better solution is to run the code below every SLOT_CHECK_PERIOD ms. If it
+ * finds active ATL slots which are older than SLOT_TIMEOUT ms, it checks the
+ * slot's ACTIVE and VALID bits. If these are not set, the ptd is considered
+ * completed and its done map bit is set.
+ *
+ * The values of SLOT_TIMEOUT and SLOT_CHECK_PERIOD have been arbitrarily chosen
+ * not to cause too much lag when this HW bug occurs, while still hopefully
+ * ensuring that the check does not falsely trigger.
+ */
+#define SLOT_TIMEOUT 300
+#define SLOT_CHECK_PERIOD 200
+static struct timer_list errata2_timer;
+static struct usb_hcd *errata2_timer_hcd;
+
+static void errata2_function(struct timer_list *unused)
+{
+	struct usb_hcd *hcd = errata2_timer_hcd;
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
+	int slot;
+	struct ptd ptd;
+	unsigned long spinflags;
+
+	spin_lock_irqsave(&priv->lock, spinflags);
+
+	for (slot = 0; slot < mem->slot_num; slot++)
+		if (priv->atl_slots[slot].qh && time_after(jiffies,
+					priv->atl_slots[slot].timestamp +
+					msecs_to_jiffies(SLOT_TIMEOUT))) {
+			ptd_read(hcd, ATL_PTD_OFFSET, slot, &ptd);
+			if (!FROM_DW0_VALID(ptd.dw0) &&
+					!FROM_DW3_ACTIVE(ptd.dw3))
+				priv->atl_done_map |= 1 << slot;
+		}
+
+	if (priv->atl_done_map)
+		handle_done_ptds(hcd);
+
+	spin_unlock_irqrestore(&priv->lock, spinflags);
+
+	errata2_timer.expires = jiffies + msecs_to_jiffies(SLOT_CHECK_PERIOD);
+	add_timer(&errata2_timer);
+}
+
+static int isp1763_run(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	int retval;
+	u32 chipid_h;
+	u32 chipid_l;
+	u32 chip_rev;
+	u32 ptd_atl_int;
+	u32 ptd_iso;
+
+	hcd->uses_new_polling = 1;
+	hcd->state = HC_STATE_RUNNING;
+
+	chipid_h = isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH);
+	chipid_l = isp1760_hcd_read(hcd, HC_CHIP_ID_LOW);
+	chip_rev = isp1760_hcd_read(hcd, HC_CHIP_REV);
+	dev_info(hcd->self.controller, "USB ISP %02x%02x HW rev. %d started\n",
+		 chipid_h, chipid_l, chip_rev);
+
+	isp1760_hcd_clear(hcd, ISO_BUF_FILL);
+	isp1760_hcd_clear(hcd, INT_BUF_FILL);
+	isp1760_hcd_clear(hcd, ATL_BUF_FILL);
+
+	isp1760_hcd_set(hcd, HC_ATL_PTD_SKIPMAP);
+	isp1760_hcd_set(hcd, HC_INT_PTD_SKIPMAP);
+	isp1760_hcd_set(hcd, HC_ISO_PTD_SKIPMAP);
+	ndelay(100);
+	isp1760_hcd_clear(hcd, HC_ATL_PTD_DONEMAP);
+	isp1760_hcd_clear(hcd, HC_INT_PTD_DONEMAP);
+	isp1760_hcd_clear(hcd, HC_ISO_PTD_DONEMAP);
+
+	isp1760_hcd_set(hcd, HW_OTG_DISABLE);
+	isp1760_reg_write(priv->regs, ISP1763_HC_OTG_CTRL_CLEAR, BIT(7));
+	isp1760_reg_write(priv->regs, ISP1763_HC_OTG_CTRL_CLEAR, BIT(15));
+	mdelay(10);
+
+	isp1760_hcd_set(hcd, HC_INT_IRQ_ENABLE);
+	isp1760_hcd_set(hcd, HC_ATL_IRQ_ENABLE);
+
+	isp1760_hcd_set(hcd, HW_GLOBAL_INTR_EN);
+
+	isp1760_hcd_clear(hcd, HC_ATL_IRQ_MASK_AND);
+	isp1760_hcd_clear(hcd, HC_INT_IRQ_MASK_AND);
+	isp1760_hcd_clear(hcd, HC_ISO_IRQ_MASK_AND);
+
+	isp1760_hcd_set(hcd, HC_ATL_IRQ_MASK_OR);
+	isp1760_hcd_set(hcd, HC_INT_IRQ_MASK_OR);
+	isp1760_hcd_set(hcd, HC_ISO_IRQ_MASK_OR);
+
+	ptd_atl_int = 0x8000;
+	ptd_iso = 0x0001;
+
+	isp1760_hcd_write(hcd, HC_ATL_PTD_LASTPTD, ptd_atl_int);
+	isp1760_hcd_write(hcd, HC_INT_PTD_LASTPTD, ptd_atl_int);
+	isp1760_hcd_write(hcd, HC_ISO_PTD_LASTPTD, ptd_iso);
+
+	isp1760_hcd_set(hcd, ATL_BUF_FILL);
+	isp1760_hcd_set(hcd, INT_BUF_FILL);
+
+	isp1760_hcd_clear(hcd, CMD_LRESET);
+	isp1760_hcd_clear(hcd, CMD_RESET);
+
+	retval = isp1760_hcd_set_and_wait(hcd, CMD_RUN, 250 * 1000);
+	if (retval)
+		return retval;
+
+	down_write(&ehci_cf_port_reset_rwsem);
+	retval = isp1760_hcd_set_and_wait(hcd, FLAG_CF, 250 * 1000);
+	up_write(&ehci_cf_port_reset_rwsem);
+	if (retval)
+		return retval;
+
+	return 0;
+}
+
+static int isp1760_run(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	int retval;
+	u32 chipid_h;
+	u32 chipid_l;
+	u32 chip_rev;
+	u32 ptd_atl_int;
+	u32 ptd_iso;
+
+	/*
+	 * ISP1763 have some differences in the setup and order to enable
+	 * the ports, disable otg, setup buffers, and ATL, INT, ISO status.
+	 * So, just handle it a separate sequence.
+	 */
+	if (priv->is_isp1763)
+		return isp1763_run(hcd);
+
+	hcd->uses_new_polling = 1;
+
+	hcd->state = HC_STATE_RUNNING;
+
+	/* Set PTD interrupt AND & OR maps */
+	isp1760_hcd_clear(hcd, HC_ATL_IRQ_MASK_AND);
+	isp1760_hcd_clear(hcd, HC_INT_IRQ_MASK_AND);
+	isp1760_hcd_clear(hcd, HC_ISO_IRQ_MASK_AND);
+
+	isp1760_hcd_set(hcd, HC_ATL_IRQ_MASK_OR);
+	isp1760_hcd_set(hcd, HC_INT_IRQ_MASK_OR);
+	isp1760_hcd_set(hcd, HC_ISO_IRQ_MASK_OR);
+
+	/* step 23 passed */
+
+	isp1760_hcd_set(hcd, HW_GLOBAL_INTR_EN);
+
+	isp1760_hcd_clear(hcd, CMD_LRESET);
+	isp1760_hcd_clear(hcd, CMD_RESET);
+
+	retval = isp1760_hcd_set_and_wait(hcd, CMD_RUN, 250 * 1000);
+	if (retval)
+		return retval;
+
+	/*
+	 * XXX
+	 * Spec says to write FLAG_CF as last config action, priv code grabs
+	 * the semaphore while doing so.
+	 */
+	down_write(&ehci_cf_port_reset_rwsem);
+
+	retval = isp1760_hcd_set_and_wait(hcd, FLAG_CF, 250 * 1000);
+	up_write(&ehci_cf_port_reset_rwsem);
+	if (retval)
+		return retval;
+
+	errata2_timer_hcd = hcd;
+	timer_setup(&errata2_timer, errata2_function, 0);
+	errata2_timer.expires = jiffies + msecs_to_jiffies(SLOT_CHECK_PERIOD);
+	add_timer(&errata2_timer);
+
+	chipid_h = isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH);
+	chipid_l = isp1760_hcd_read(hcd, HC_CHIP_ID_LOW);
+	chip_rev = isp1760_hcd_read(hcd, HC_CHIP_REV);
+	dev_info(hcd->self.controller, "USB ISP %02x%02x HW rev. %d started\n",
+		 chipid_h, chipid_l, chip_rev);
+
+	/* PTD Register Init Part 2, Step 28 */
+
+	/* Setup registers controlling PTD checking */
+	ptd_atl_int = 0x80000000;
+	ptd_iso = 0x00000001;
+
+	isp1760_hcd_write(hcd, HC_ATL_PTD_LASTPTD, ptd_atl_int);
+	isp1760_hcd_write(hcd, HC_INT_PTD_LASTPTD, ptd_atl_int);
+	isp1760_hcd_write(hcd, HC_ISO_PTD_LASTPTD, ptd_iso);
+
+	isp1760_hcd_set(hcd, HC_ATL_PTD_SKIPMAP);
+	isp1760_hcd_set(hcd, HC_INT_PTD_SKIPMAP);
+	isp1760_hcd_set(hcd, HC_ISO_PTD_SKIPMAP);
+
+	isp1760_hcd_set(hcd, ATL_BUF_FILL);
+	isp1760_hcd_set(hcd, INT_BUF_FILL);
+
+	/* GRR this is run-once init(), being done every time the HC starts.
+	 * So long as they're part of class devices, we can't do it init()
+	 * since the class device isn't created that early.
+	 */
+	return 0;
+}
+
+static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len)
+{
+	qtd->data_buffer = databuffer;
+
+	qtd->length = len;
+
+	return qtd->length;
+}
+
+static void qtd_list_free(struct list_head *qtd_list)
+{
+	struct isp1760_qtd *qtd, *qtd_next;
+
+	list_for_each_entry_safe(qtd, qtd_next, qtd_list, qtd_list) {
+		list_del(&qtd->qtd_list);
+		qtd_free(qtd);
+	}
+}
+
+/*
+ * Packetize urb->transfer_buffer into list of packets of size wMaxPacketSize.
+ * Also calculate the PID type (SETUP/IN/OUT) for each packet.
+ */
+static void packetize_urb(struct usb_hcd *hcd,
+		struct urb *urb, struct list_head *head, gfp_t flags)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
+	struct isp1760_qtd *qtd;
+	void *buf;
+	int len, maxpacketsize;
+	u8 packet_type;
+
+	/*
+	 * URBs map to sequences of QTDs:  one logical transaction
+	 */
+
+	if (!urb->transfer_buffer && urb->transfer_buffer_length) {
+		/* XXX This looks like usb storage / SCSI bug */
+		dev_err(hcd->self.controller,
+				"buf is null, dma is %08lx len is %d\n",
+				(long unsigned)urb->transfer_dma,
+				urb->transfer_buffer_length);
+		WARN_ON(1);
+	}
+
+	if (usb_pipein(urb->pipe))
+		packet_type = IN_PID;
+	else
+		packet_type = OUT_PID;
+
+	if (usb_pipecontrol(urb->pipe)) {
+		qtd = qtd_alloc(flags, urb, SETUP_PID);
+		if (!qtd)
+			goto cleanup;
+		qtd_fill(qtd, urb->setup_packet, sizeof(struct usb_ctrlrequest));
+		list_add_tail(&qtd->qtd_list, head);
+
+		/* for zero length DATA stages, STATUS is always IN */
+		if (urb->transfer_buffer_length == 0)
+			packet_type = IN_PID;
+	}
+
+	maxpacketsize = usb_maxpacket(urb->dev, urb->pipe);
+
+	/*
+	 * buffer gets wrapped in one or more qtds;
+	 * last one may be "short" (including zero len)
+	 * and may serve as a control status ack
+	 */
+	buf = urb->transfer_buffer;
+	len = urb->transfer_buffer_length;
+
+	for (;;) {
+		int this_qtd_len;
+
+		qtd = qtd_alloc(flags, urb, packet_type);
+		if (!qtd)
+			goto cleanup;
+
+		if (len > mem->blocks_size[ISP176x_BLOCK_NUM - 1])
+			this_qtd_len = mem->blocks_size[ISP176x_BLOCK_NUM - 1];
+		else
+			this_qtd_len = len;
+
+		this_qtd_len = qtd_fill(qtd, buf, this_qtd_len);
+		list_add_tail(&qtd->qtd_list, head);
+
+		len -= this_qtd_len;
+		buf += this_qtd_len;
+
+		if (len <= 0)
+			break;
+	}
+
+	/*
+	 * control requests may need a terminating data "status" ack;
+	 * bulk ones may need a terminating short packet (zero length).
+	 */
+	if (urb->transfer_buffer_length != 0) {
+		int one_more = 0;
+
+		if (usb_pipecontrol(urb->pipe)) {
+			one_more = 1;
+			if (packet_type == IN_PID)
+				packet_type = OUT_PID;
+			else
+				packet_type = IN_PID;
+		} else if (usb_pipebulk(urb->pipe) && maxpacketsize
+				&& (urb->transfer_flags & URB_ZERO_PACKET)
+				&& !(urb->transfer_buffer_length %
+							maxpacketsize)) {
+			one_more = 1;
+		}
+		if (one_more) {
+			qtd = qtd_alloc(flags, urb, packet_type);
+			if (!qtd)
+				goto cleanup;
+
+			/* never any data in such packets */
+			qtd_fill(qtd, NULL, 0);
+			list_add_tail(&qtd->qtd_list, head);
+		}
+	}
+
+	return;
+
+cleanup:
+	qtd_list_free(head);
+}
+
+static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+		gfp_t mem_flags)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	struct list_head *ep_queue;
+	struct isp1760_qh *qh, *qhit;
+	unsigned long spinflags;
+	LIST_HEAD(new_qtds);
+	int retval;
+	int qh_in_queue;
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_CONTROL:
+		ep_queue = &priv->qh_list[QH_CONTROL];
+		break;
+	case PIPE_BULK:
+		ep_queue = &priv->qh_list[QH_BULK];
+		break;
+	case PIPE_INTERRUPT:
+		if (urb->interval < 0)
+			return -EINVAL;
+		/* FIXME: Check bandwidth  */
+		ep_queue = &priv->qh_list[QH_INTERRUPT];
+		break;
+	case PIPE_ISOCHRONOUS:
+		dev_err(hcd->self.controller, "%s: isochronous USB packets "
+							"not yet supported\n",
+							__func__);
+		return -EPIPE;
+	default:
+		dev_err(hcd->self.controller, "%s: unknown pipe type\n",
+							__func__);
+		return -EPIPE;
+	}
+
+	if (usb_pipein(urb->pipe))
+		urb->actual_length = 0;
+
+	packetize_urb(hcd, urb, &new_qtds, mem_flags);
+	if (list_empty(&new_qtds))
+		return -ENOMEM;
+
+	spin_lock_irqsave(&priv->lock, spinflags);
+
+	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+		retval = -ESHUTDOWN;
+		qtd_list_free(&new_qtds);
+		goto out;
+	}
+	retval = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (retval) {
+		qtd_list_free(&new_qtds);
+		goto out;
+	}
+
+	qh = urb->ep->hcpriv;
+	if (qh) {
+		qh_in_queue = 0;
+		list_for_each_entry(qhit, ep_queue, qh_list) {
+			if (qhit == qh) {
+				qh_in_queue = 1;
+				break;
+			}
+		}
+		if (!qh_in_queue)
+			list_add_tail(&qh->qh_list, ep_queue);
+	} else {
+		qh = qh_alloc(GFP_ATOMIC);
+		if (!qh) {
+			retval = -ENOMEM;
+			usb_hcd_unlink_urb_from_ep(hcd, urb);
+			qtd_list_free(&new_qtds);
+			goto out;
+		}
+		list_add_tail(&qh->qh_list, ep_queue);
+		urb->ep->hcpriv = qh;
+	}
+
+	list_splice_tail(&new_qtds, &qh->qtd_list);
+	schedule_ptds(hcd);
+
+out:
+	spin_unlock_irqrestore(&priv->lock, spinflags);
+	return retval;
+}
+
+static void kill_transfer(struct usb_hcd *hcd, struct urb *urb,
+		struct isp1760_qh *qh)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	int skip_map;
+
+	WARN_ON(qh->slot == -1);
+
+	/* We need to forcefully reclaim the slot since some transfers never
+	   return, e.g. interrupt transfers and NAKed bulk transfers. */
+	if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) {
+		if (qh->slot != -1) {
+			skip_map = isp1760_hcd_read(hcd, HC_ATL_PTD_SKIPMAP);
+			skip_map |= (1 << qh->slot);
+			isp1760_hcd_write(hcd, HC_ATL_PTD_SKIPMAP, skip_map);
+			ndelay(100);
+		}
+		priv->atl_slots[qh->slot].qh = NULL;
+		priv->atl_slots[qh->slot].qtd = NULL;
+	} else {
+		if (qh->slot != -1) {
+			skip_map = isp1760_hcd_read(hcd, HC_INT_PTD_SKIPMAP);
+			skip_map |= (1 << qh->slot);
+			isp1760_hcd_write(hcd, HC_INT_PTD_SKIPMAP, skip_map);
+		}
+		priv->int_slots[qh->slot].qh = NULL;
+		priv->int_slots[qh->slot].qtd = NULL;
+	}
+
+	qh->slot = -1;
+}
+
+/*
+ * Retire the qtds beginning at 'qtd' and belonging all to the same urb, killing
+ * any active transfer belonging to the urb in the process.
+ */
+static void dequeue_urb_from_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh,
+						struct isp1760_qtd *qtd)
+{
+	struct urb *urb;
+	int urb_was_running;
+
+	urb = qtd->urb;
+	urb_was_running = 0;
+	list_for_each_entry_from(qtd, &qh->qtd_list, qtd_list) {
+		if (qtd->urb != urb)
+			break;
+
+		if (qtd->status >= QTD_XFER_STARTED)
+			urb_was_running = 1;
+		if (last_qtd_of_urb(qtd, qh) &&
+					(qtd->status >= QTD_XFER_COMPLETE))
+			urb_was_running = 0;
+
+		if (qtd->status == QTD_XFER_STARTED)
+			kill_transfer(hcd, urb, qh);
+		qtd->status = QTD_RETIRE;
+	}
+
+	if ((urb->dev->speed != USB_SPEED_HIGH) && urb_was_running) {
+		qh->tt_buffer_dirty = 1;
+		if (usb_hub_clear_tt_buffer(urb))
+			/* Clear failed; let's hope things work anyway */
+			qh->tt_buffer_dirty = 0;
+	}
+}
+
+static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+		int status)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	unsigned long spinflags;
+	struct isp1760_qh *qh;
+	struct isp1760_qtd *qtd;
+	int retval = 0;
+
+	spin_lock_irqsave(&priv->lock, spinflags);
+	retval = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (retval)
+		goto out;
+
+	qh = urb->ep->hcpriv;
+	if (!qh) {
+		retval = -EINVAL;
+		goto out;
+	}
+
+	list_for_each_entry(qtd, &qh->qtd_list, qtd_list)
+		if (qtd->urb == urb) {
+			dequeue_urb_from_qtd(hcd, qh, qtd);
+			list_move(&qtd->qtd_list, &qh->qtd_list);
+			break;
+		}
+
+	urb->status = status;
+	schedule_ptds(hcd);
+
+out:
+	spin_unlock_irqrestore(&priv->lock, spinflags);
+	return retval;
+}
+
+static void isp1760_endpoint_disable(struct usb_hcd *hcd,
+		struct usb_host_endpoint *ep)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	unsigned long spinflags;
+	struct isp1760_qh *qh, *qh_iter;
+	int i;
+
+	spin_lock_irqsave(&priv->lock, spinflags);
+
+	qh = ep->hcpriv;
+	if (!qh)
+		goto out;
+
+	WARN_ON(!list_empty(&qh->qtd_list));
+
+	for (i = 0; i < QH_END; i++)
+		list_for_each_entry(qh_iter, &priv->qh_list[i], qh_list)
+			if (qh_iter == qh) {
+				list_del(&qh_iter->qh_list);
+				i = QH_END;
+				break;
+			}
+	qh_free(qh);
+	ep->hcpriv = NULL;
+
+	schedule_ptds(hcd);
+
+out:
+	spin_unlock_irqrestore(&priv->lock, spinflags);
+}
+
+static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 status = 0;
+	int retval = 1;
+	unsigned long flags;
+
+	/* if !PM, root hub timers won't get shut down ... */
+	if (!HC_IS_RUNNING(hcd->state))
+		return 0;
+
+	/* init status to no-changes */
+	buf[0] = 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	if (isp1760_hcd_is_set(hcd, PORT_OWNER) &&
+	    isp1760_hcd_is_set(hcd, PORT_CSC)) {
+		isp1760_hcd_clear(hcd, PORT_CSC);
+		goto done;
+	}
+
+	/*
+	 * Return status information even for ports with OWNER set.
+	 * Otherwise hub_wq wouldn't see the disconnect event when a
+	 * high-speed device is switched over to the companion
+	 * controller by the user.
+	 */
+	if (isp1760_hcd_is_set(hcd, PORT_CSC) ||
+	    (isp1760_hcd_is_set(hcd, PORT_RESUME) &&
+	     time_after_eq(jiffies, priv->reset_done))) {
+		buf [0] |= 1 << (0 + 1);
+		status = STS_PCD;
+	}
+	/* FIXME autosuspend idle root hubs */
+done:
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return status ? retval : 0;
+}
+
+static void isp1760_hub_descriptor(struct isp1760_hcd *priv,
+		struct usb_hub_descriptor *desc)
+{
+	int ports;
+	u16 temp;
+
+	ports = isp1760_hcd_n_ports(priv->hcd);
+
+	desc->bDescriptorType = USB_DT_HUB;
+	/* priv 1.0, 2.3.9 says 20ms max */
+	desc->bPwrOn2PwrGood = 10;
+	desc->bHubContrCurrent = 0;
+
+	desc->bNbrPorts = ports;
+	temp = 1 + (ports / 8);
+	desc->bDescLength = 7 + 2 * temp;
+
+	/* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+	memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
+	memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
+
+	/* per-port overcurrent reporting */
+	temp = HUB_CHAR_INDV_PORT_OCPM;
+	if (isp1760_hcd_ppc_is_set(priv->hcd))
+		/* per-port power control */
+		temp |= HUB_CHAR_INDV_PORT_LPSM;
+	else
+		/* no power switching */
+		temp |= HUB_CHAR_NO_LPSM;
+	desc->wHubCharacteristics = cpu_to_le16(temp);
+}
+
+#define	PORT_WAKE_BITS	(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
+
+static void check_reset_complete(struct usb_hcd *hcd, int index)
+{
+	if (!(isp1760_hcd_is_set(hcd, PORT_CONNECT)))
+		return;
+
+	/* if reset finished and it's still not enabled -- handoff */
+	if (!isp1760_hcd_is_set(hcd, PORT_PE)) {
+		dev_info(hcd->self.controller,
+			 "port %d full speed --> companion\n", index + 1);
+
+		isp1760_hcd_set(hcd, PORT_OWNER);
+
+		isp1760_hcd_clear(hcd, PORT_CSC);
+	} else {
+		dev_info(hcd->self.controller, "port %d high speed\n",
+			 index + 1);
+	}
+
+	return;
+}
+
+static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
+		u16 wValue, u16 wIndex, char *buf, u16 wLength)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 status;
+	unsigned long flags;
+	int retval = 0;
+	int ports;
+
+	ports = isp1760_hcd_n_ports(hcd);
+
+	/*
+	 * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
+	 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
+	 * (track current state ourselves) ... blink for diagnostics,
+	 * power, "this is the one", etc.  EHCI spec supports this.
+	 */
+
+	spin_lock_irqsave(&priv->lock, flags);
+	switch (typeReq) {
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* no hub-wide feature/status flags */
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+
+		/*
+		 * Even if OWNER is set, so the port is owned by the
+		 * companion controller, hub_wq needs to be able to clear
+		 * the port-change status bits (especially
+		 * USB_PORT_STAT_C_CONNECTION).
+		 */
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			isp1760_hcd_clear(hcd, PORT_PE);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			/* XXX error? */
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			if (isp1760_hcd_is_set(hcd, PORT_RESET))
+				goto error;
+
+			if (isp1760_hcd_is_set(hcd, PORT_SUSPEND)) {
+				if (!isp1760_hcd_is_set(hcd, PORT_PE))
+					goto error;
+				/* resume signaling for 20 msec */
+				isp1760_hcd_clear(hcd, PORT_CSC);
+				isp1760_hcd_set(hcd, PORT_RESUME);
+
+				priv->reset_done = jiffies +
+					msecs_to_jiffies(USB_RESUME_TIMEOUT);
+			}
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			/* we auto-clear this feature */
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (isp1760_hcd_ppc_is_set(hcd))
+				isp1760_hcd_clear(hcd, PORT_POWER);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			isp1760_hcd_set(hcd, PORT_CSC);
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			/* XXX error ?*/
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			/* GetPortStatus clears reset */
+			break;
+		default:
+			goto error;
+		}
+		isp1760_hcd_read(hcd, CMD_RUN);
+		break;
+	case GetHubDescriptor:
+		isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *)
+			buf);
+		break;
+	case GetHubStatus:
+		/* no hub-wide feature/status flags */
+		memset(buf, 0, 4);
+		break;
+	case GetPortStatus:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		status = 0;
+
+		/* wPortChange bits */
+		if (isp1760_hcd_is_set(hcd, PORT_CSC))
+			status |= USB_PORT_STAT_C_CONNECTION << 16;
+
+		/* whoever resumes must GetPortStatus to complete it!! */
+		if (isp1760_hcd_is_set(hcd, PORT_RESUME)) {
+			dev_err(hcd->self.controller, "Port resume should be skipped.\n");
+
+			/* Remote Wakeup received? */
+			if (!priv->reset_done) {
+				/* resume signaling for 20 msec */
+				priv->reset_done = jiffies
+						+ msecs_to_jiffies(20);
+				/* check the port again */
+				mod_timer(&hcd->rh_timer, priv->reset_done);
+			}
+
+			/* resume completed? */
+			else if (time_after_eq(jiffies,
+					priv->reset_done)) {
+				status |= USB_PORT_STAT_C_SUSPEND << 16;
+				priv->reset_done = 0;
+
+				/* stop resume signaling */
+				isp1760_hcd_clear(hcd, PORT_CSC);
+
+				retval = isp1760_hcd_clear_and_wait(hcd,
+							  PORT_RESUME, 2000);
+				if (retval != 0) {
+					dev_err(hcd->self.controller,
+						"port %d resume error %d\n",
+						wIndex + 1, retval);
+					goto error;
+				}
+			}
+		}
+
+		/* whoever resets must GetPortStatus to complete it!! */
+		if (isp1760_hcd_is_set(hcd, PORT_RESET) &&
+		    time_after_eq(jiffies, priv->reset_done)) {
+			status |= USB_PORT_STAT_C_RESET << 16;
+			priv->reset_done = 0;
+
+			/* force reset to complete */
+			/* REVISIT:  some hardware needs 550+ usec to clear
+			 * this bit; seems too long to spin routinely...
+			 */
+			retval = isp1760_hcd_clear_and_wait(hcd, PORT_RESET,
+							    750);
+			if (retval != 0) {
+				dev_err(hcd->self.controller, "port %d reset error %d\n",
+					wIndex + 1, retval);
+				goto error;
+			}
+
+			/* see what we found out */
+			check_reset_complete(hcd, wIndex);
+		}
+		/*
+		 * Even if OWNER is set, there's no harm letting hub_wq
+		 * see the wPortStatus values (they should all be 0 except
+		 * for PORT_POWER anyway).
+		 */
+
+		if (isp1760_hcd_is_set(hcd, PORT_OWNER))
+			dev_err(hcd->self.controller, "PORT_OWNER is set\n");
+
+		if (isp1760_hcd_is_set(hcd, PORT_CONNECT)) {
+			status |= USB_PORT_STAT_CONNECTION;
+			/* status may be from integrated TT */
+			status |= USB_PORT_STAT_HIGH_SPEED;
+		}
+		if (isp1760_hcd_is_set(hcd, PORT_PE))
+			status |= USB_PORT_STAT_ENABLE;
+		if (isp1760_hcd_is_set(hcd, PORT_SUSPEND) &&
+		    isp1760_hcd_is_set(hcd, PORT_RESUME))
+			status |= USB_PORT_STAT_SUSPEND;
+		if (isp1760_hcd_is_set(hcd, PORT_RESET))
+			status |= USB_PORT_STAT_RESET;
+		if (isp1760_hcd_is_set(hcd, PORT_POWER))
+			status |= USB_PORT_STAT_POWER;
+
+		put_unaligned(cpu_to_le32(status), (__le32 *) buf);
+		break;
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* no hub-wide feature/status flags */
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetPortFeature:
+		wIndex &= 0xff;
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+
+		if (isp1760_hcd_is_set(hcd, PORT_OWNER))
+			break;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			isp1760_hcd_set(hcd, PORT_PE);
+			break;
+
+		case USB_PORT_FEAT_SUSPEND:
+			if (!isp1760_hcd_is_set(hcd, PORT_PE) ||
+			    isp1760_hcd_is_set(hcd, PORT_RESET))
+				goto error;
+
+			isp1760_hcd_set(hcd, PORT_SUSPEND);
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (isp1760_hcd_ppc_is_set(hcd))
+				isp1760_hcd_set(hcd, PORT_POWER);
+			break;
+		case USB_PORT_FEAT_RESET:
+			if (isp1760_hcd_is_set(hcd, PORT_RESUME))
+				goto error;
+			/* line status bits may report this as low speed,
+			 * which can be fine if this root hub has a
+			 * transaction translator built in.
+			 */
+			if ((isp1760_hcd_is_set(hcd, PORT_CONNECT) &&
+			     !isp1760_hcd_is_set(hcd, PORT_PE)) &&
+			    (isp1760_hcd_read(hcd, PORT_LSTATUS) == 1)) {
+				isp1760_hcd_set(hcd, PORT_OWNER);
+			} else {
+				isp1760_hcd_set(hcd, PORT_RESET);
+				isp1760_hcd_clear(hcd, PORT_PE);
+
+				/*
+				 * caller must wait, then call GetPortStatus
+				 * usb 2.0 spec says 50 ms resets on root
+				 */
+				priv->reset_done = jiffies +
+					msecs_to_jiffies(50);
+			}
+			break;
+		default:
+			goto error;
+		}
+		break;
+
+	default:
+error:
+		/* "stall" on error */
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return retval;
+}
+
+static int isp1760_get_frame(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 fr;
+
+	fr = isp1760_hcd_read(hcd, HC_FRINDEX);
+	return (fr >> 3) % priv->periodic_size;
+}
+
+static void isp1760_stop(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	del_timer(&errata2_timer);
+
+	isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER,	1,
+			NULL, 0);
+	msleep(20);
+
+	spin_lock_irq(&priv->lock);
+	ehci_reset(hcd);
+	/* Disable IRQ */
+	isp1760_hcd_clear(hcd, HW_GLOBAL_INTR_EN);
+	spin_unlock_irq(&priv->lock);
+
+	isp1760_hcd_clear(hcd, FLAG_CF);
+}
+
+static void isp1760_shutdown(struct usb_hcd *hcd)
+{
+	isp1760_stop(hcd);
+
+	isp1760_hcd_clear(hcd, HW_GLOBAL_INTR_EN);
+
+	isp1760_hcd_clear(hcd, CMD_RUN);
+}
+
+static void isp1760_clear_tt_buffer_complete(struct usb_hcd *hcd,
+						struct usb_host_endpoint *ep)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	struct isp1760_qh *qh = ep->hcpriv;
+	unsigned long spinflags;
+
+	if (!qh)
+		return;
+
+	spin_lock_irqsave(&priv->lock, spinflags);
+	qh->tt_buffer_dirty = 0;
+	schedule_ptds(hcd);
+	spin_unlock_irqrestore(&priv->lock, spinflags);
+}
+
+
+static const struct hc_driver isp1760_hc_driver = {
+	.description		= "isp1760-hcd",
+	.product_desc		= "NXP ISP1760 USB Host Controller",
+	.hcd_priv_size		= sizeof(struct isp1760_hcd *),
+	.irq			= isp1760_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+	.reset			= isp1760_hc_setup,
+	.start			= isp1760_run,
+	.stop			= isp1760_stop,
+	.shutdown		= isp1760_shutdown,
+	.urb_enqueue		= isp1760_urb_enqueue,
+	.urb_dequeue		= isp1760_urb_dequeue,
+	.endpoint_disable	= isp1760_endpoint_disable,
+	.get_frame_number	= isp1760_get_frame,
+	.hub_status_data	= isp1760_hub_status_data,
+	.hub_control		= isp1760_hub_control,
+	.clear_tt_buffer_complete	= isp1760_clear_tt_buffer_complete,
+};
+
+int __init isp1760_init_kmem_once(void)
+{
+	urb_listitem_cachep = kmem_cache_create("isp1760_urb_listitem",
+			sizeof(struct urb_listitem), 0, SLAB_TEMPORARY |
+			SLAB_MEM_SPREAD, NULL);
+
+	if (!urb_listitem_cachep)
+		return -ENOMEM;
+
+	qtd_cachep = kmem_cache_create("isp1760_qtd",
+			sizeof(struct isp1760_qtd), 0, SLAB_TEMPORARY |
+			SLAB_MEM_SPREAD, NULL);
+
+	if (!qtd_cachep)
+		goto destroy_urb_listitem;
+
+	qh_cachep = kmem_cache_create("isp1760_qh", sizeof(struct isp1760_qh),
+			0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL);
+
+	if (!qh_cachep)
+		goto destroy_qtd;
+
+	return 0;
+
+destroy_qtd:
+	kmem_cache_destroy(qtd_cachep);
+
+destroy_urb_listitem:
+	kmem_cache_destroy(urb_listitem_cachep);
+
+	return -ENOMEM;
+}
+
+void isp1760_deinit_kmem_cache(void)
+{
+	kmem_cache_destroy(qtd_cachep);
+	kmem_cache_destroy(qh_cachep);
+	kmem_cache_destroy(urb_listitem_cachep);
+}
+
+int isp1760_hcd_register(struct isp1760_hcd *priv, struct resource *mem,
+			 int irq, unsigned long irqflags,
+			 struct device *dev)
+{
+	const struct isp1760_memory_layout *mem_layout = priv->memory_layout;
+	struct usb_hcd *hcd;
+	int ret;
+
+	hcd = usb_create_hcd(&isp1760_hc_driver, dev, dev_name(dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	*(struct isp1760_hcd **)hcd->hcd_priv = priv;
+
+	priv->hcd = hcd;
+
+	priv->atl_slots = kcalloc(mem_layout->slot_num,
+				  sizeof(struct isp1760_slotinfo), GFP_KERNEL);
+	if (!priv->atl_slots) {
+		ret = -ENOMEM;
+		goto put_hcd;
+	}
+
+	priv->int_slots = kcalloc(mem_layout->slot_num,
+				  sizeof(struct isp1760_slotinfo), GFP_KERNEL);
+	if (!priv->int_slots) {
+		ret = -ENOMEM;
+		goto free_atl_slots;
+	}
+
+	init_memory(priv);
+
+	hcd->irq = irq;
+	hcd->rsrc_start = mem->start;
+	hcd->rsrc_len = resource_size(mem);
+
+	/* This driver doesn't support wakeup requests */
+	hcd->cant_recv_wakeups = 1;
+
+	ret = usb_add_hcd(hcd, irq, irqflags);
+	if (ret)
+		goto free_int_slots;
+
+	device_wakeup_enable(hcd->self.controller);
+
+	return 0;
+
+free_int_slots:
+	kfree(priv->int_slots);
+free_atl_slots:
+	kfree(priv->atl_slots);
+put_hcd:
+	usb_put_hcd(hcd);
+	return ret;
+}
+
+void isp1760_hcd_unregister(struct isp1760_hcd *priv)
+{
+	if (!priv->hcd)
+		return;
+
+	usb_remove_hcd(priv->hcd);
+	usb_put_hcd(priv->hcd);
+	kfree(priv->atl_slots);
+	kfree(priv->int_slots);
+}
diff --git a/drivers/usb/isp1760/isp1760-hcd.h b/drivers/usb/isp1760/isp1760-hcd.h
new file mode 100644
index 000000000..ee3063a34
--- /dev/null
+++ b/drivers/usb/isp1760/isp1760-hcd.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ISP1760_HCD_H_
+#define _ISP1760_HCD_H_
+
+#include <linux/spinlock.h>
+#include <linux/regmap.h>
+
+#include "isp1760-regs.h"
+
+struct isp1760_qh;
+struct isp1760_qtd;
+struct resource;
+struct usb_hcd;
+
+struct isp1760_slotinfo {
+	struct isp1760_qh *qh;
+	struct isp1760_qtd *qtd;
+	unsigned long timestamp;
+};
+
+/* chip memory management */
+#define ISP176x_BLOCK_MAX (32 + 20 + 4)
+#define ISP176x_BLOCK_NUM 3
+
+struct isp1760_memory_layout {
+	unsigned int blocks[ISP176x_BLOCK_NUM];
+	unsigned int blocks_size[ISP176x_BLOCK_NUM];
+
+	unsigned int slot_num;
+	unsigned int payload_blocks;
+	unsigned int payload_area_size;
+};
+
+struct isp1760_memory_chunk {
+	unsigned int start;
+	unsigned int size;
+	unsigned int free;
+};
+
+enum isp1760_queue_head_types {
+	QH_CONTROL,
+	QH_BULK,
+	QH_INTERRUPT,
+	QH_END
+};
+
+struct isp1760_hcd {
+	struct usb_hcd		*hcd;
+
+	void __iomem		*base;
+
+	struct regmap		*regs;
+	struct regmap_field	*fields[HC_FIELD_MAX];
+
+	bool			is_isp1763;
+	const struct isp1760_memory_layout	*memory_layout;
+
+	spinlock_t		lock;
+	struct isp1760_slotinfo	*atl_slots;
+	int			atl_done_map;
+	struct isp1760_slotinfo	*int_slots;
+	int			int_done_map;
+	struct isp1760_memory_chunk memory_pool[ISP176x_BLOCK_MAX];
+	struct list_head	qh_list[QH_END];
+
+	/* periodic schedule support */
+#define	DEFAULT_I_TDPS		1024
+	unsigned		periodic_size;
+	unsigned		i_thresh;
+	unsigned long		reset_done;
+	unsigned long		next_statechange;
+};
+
+#ifdef CONFIG_USB_ISP1760_HCD
+int isp1760_hcd_register(struct isp1760_hcd *priv, struct resource *mem,
+			 int irq, unsigned long irqflags, struct device *dev);
+void isp1760_hcd_unregister(struct isp1760_hcd *priv);
+
+int isp1760_init_kmem_once(void);
+void isp1760_deinit_kmem_cache(void);
+#else
+static inline int isp1760_hcd_register(struct isp1760_hcd *priv,
+				       struct resource *mem,
+				       int irq, unsigned long irqflags,
+				       struct device *dev)
+{
+	return 0;
+}
+
+static inline void isp1760_hcd_unregister(struct isp1760_hcd *priv)
+{
+}
+
+static inline int isp1760_init_kmem_once(void)
+{
+	return 0;
+}
+
+static inline void isp1760_deinit_kmem_cache(void)
+{
+}
+#endif
+
+#endif /* _ISP1760_HCD_H_ */
diff --git a/drivers/usb/isp1760/isp1760-if.c b/drivers/usb/isp1760/isp1760-if.c
new file mode 100644
index 000000000..65ba5aca2
--- /dev/null
+++ b/drivers/usb/isp1760/isp1760-if.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Glue code for the ISP1760 driver and bus
+ * Currently there is support for
+ * - OpenFirmware
+ * - PCI
+ * - PDEV (generic platform device centralized driver model)
+ *
+ * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
+ * Copyright 2021 Linaro, Rui Miguel Silva <rui.silva@linaro.org>
+ *
+ */
+
+#include <linux/usb.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
+
+#include "isp1760-core.h"
+#include "isp1760-regs.h"
+
+#ifdef CONFIG_USB_PCI
+#include <linux/pci.h>
+#endif
+
+#ifdef CONFIG_USB_PCI
+static int isp1761_pci_init(struct pci_dev *dev)
+{
+	resource_size_t mem_start;
+	resource_size_t mem_length;
+	u8 __iomem *iobase;
+	u8 latency, limit;
+	int retry_count;
+	u32 reg_data;
+
+	/* Grab the PLX PCI shared memory of the ISP 1761 we need  */
+	mem_start = pci_resource_start(dev, 3);
+	mem_length = pci_resource_len(dev, 3);
+	if (mem_length < 0xffff) {
+		printk(KERN_ERR "memory length for this resource is wrong\n");
+		return -ENOMEM;
+	}
+
+	if (!request_mem_region(mem_start, mem_length, "ISP-PCI")) {
+		printk(KERN_ERR "host controller already in use\n");
+		return -EBUSY;
+	}
+
+	/* map available memory */
+	iobase = ioremap(mem_start, mem_length);
+	if (!iobase) {
+		printk(KERN_ERR "Error ioremap failed\n");
+		release_mem_region(mem_start, mem_length);
+		return -ENOMEM;
+	}
+
+	/* bad pci latencies can contribute to overruns */
+	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &latency);
+	if (latency) {
+		pci_read_config_byte(dev, PCI_MAX_LAT, &limit);
+		if (limit && limit < latency)
+			pci_write_config_byte(dev, PCI_LATENCY_TIMER, limit);
+	}
+
+	/* Try to check whether we can access Scratch Register of
+	 * Host Controller or not. The initial PCI access is retried until
+	 * local init for the PCI bridge is completed
+	 */
+	retry_count = 20;
+	reg_data = 0;
+	while ((reg_data != 0xFACE) && retry_count) {
+		/*by default host is in 16bit mode, so
+		 * io operations at this stage must be 16 bit
+		 * */
+		writel(0xface, iobase + ISP176x_HC_SCRATCH);
+		udelay(100);
+		reg_data = readl(iobase + ISP176x_HC_SCRATCH) & 0x0000ffff;
+		retry_count--;
+	}
+
+	iounmap(iobase);
+	release_mem_region(mem_start, mem_length);
+
+	/* Host Controller presence is detected by writing to scratch register
+	 * and reading back and checking the contents are same or not
+	 */
+	if (reg_data != 0xFACE) {
+		dev_err(&dev->dev, "scratch register mismatch %x\n", reg_data);
+		return -ENOMEM;
+	}
+
+	/* Grab the PLX PCI mem maped port start address we need  */
+	mem_start = pci_resource_start(dev, 0);
+	mem_length = pci_resource_len(dev, 0);
+
+	if (!request_mem_region(mem_start, mem_length, "ISP1761 IO MEM")) {
+		printk(KERN_ERR "request region #1\n");
+		return -EBUSY;
+	}
+
+	iobase = ioremap(mem_start, mem_length);
+	if (!iobase) {
+		printk(KERN_ERR "ioremap #1\n");
+		release_mem_region(mem_start, mem_length);
+		return -ENOMEM;
+	}
+
+	/* configure PLX PCI chip to pass interrupts */
+#define PLX_INT_CSR_REG 0x68
+	reg_data = readl(iobase + PLX_INT_CSR_REG);
+	reg_data |= 0x900;
+	writel(reg_data, iobase + PLX_INT_CSR_REG);
+
+	/* done with PLX IO access */
+	iounmap(iobase);
+	release_mem_region(mem_start, mem_length);
+
+	return 0;
+}
+
+static int isp1761_pci_probe(struct pci_dev *dev,
+		const struct pci_device_id *id)
+{
+	unsigned int devflags = 0;
+	int ret;
+
+	if (!dev->irq)
+		return -ENODEV;
+
+	if (pci_enable_device(dev) < 0)
+		return -ENODEV;
+
+	ret = isp1761_pci_init(dev);
+	if (ret < 0)
+		goto error;
+
+	pci_set_master(dev);
+
+	ret = isp1760_register(&dev->resource[3], dev->irq, 0, &dev->dev,
+			       devflags);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	pci_disable_device(dev);
+	return ret;
+}
+
+static void isp1761_pci_remove(struct pci_dev *dev)
+{
+	isp1760_unregister(&dev->dev);
+
+	pci_disable_device(dev);
+}
+
+static void isp1761_pci_shutdown(struct pci_dev *dev)
+{
+	printk(KERN_ERR "ips1761_pci_shutdown\n");
+}
+
+static const struct pci_device_id isp1760_plx[] = {
+	{
+		.class          = PCI_CLASS_BRIDGE_OTHER << 8,
+		.class_mask     = ~0,
+		.vendor		= PCI_VENDOR_ID_PLX,
+		.device		= 0x5406,
+		.subvendor	= PCI_VENDOR_ID_PLX,
+		.subdevice	= 0x9054,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, isp1760_plx);
+
+static struct pci_driver isp1761_pci_driver = {
+	.name =         "isp1760",
+	.id_table =     isp1760_plx,
+	.probe =        isp1761_pci_probe,
+	.remove =       isp1761_pci_remove,
+	.shutdown =     isp1761_pci_shutdown,
+};
+#endif
+
+static int isp1760_plat_probe(struct platform_device *pdev)
+{
+	unsigned long irqflags;
+	unsigned int devflags = 0;
+	struct resource *mem_res;
+	int irq;
+	int ret;
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+	irqflags = irq_get_trigger_type(irq);
+
+	if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+		struct device_node *dp = pdev->dev.of_node;
+		u32 bus_width = 0;
+
+		if (of_device_is_compatible(dp, "nxp,usb-isp1761"))
+			devflags |= ISP1760_FLAG_ISP1761;
+
+		if (of_device_is_compatible(dp, "nxp,usb-isp1763"))
+			devflags |= ISP1760_FLAG_ISP1763;
+
+		/*
+		 * Some systems wire up only 8 of 16 data lines or
+		 * 16 of the 32 data lines
+		 */
+		of_property_read_u32(dp, "bus-width", &bus_width);
+		if (bus_width == 16)
+			devflags |= ISP1760_FLAG_BUS_WIDTH_16;
+		else if (bus_width == 8)
+			devflags |= ISP1760_FLAG_BUS_WIDTH_8;
+
+		if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL)
+			devflags |= ISP1760_FLAG_PERIPHERAL_EN;
+
+		if (of_property_read_bool(dp, "analog-oc"))
+			devflags |= ISP1760_FLAG_ANALOG_OC;
+
+		if (of_property_read_bool(dp, "dack-polarity"))
+			devflags |= ISP1760_FLAG_DACK_POL_HIGH;
+
+		if (of_property_read_bool(dp, "dreq-polarity"))
+			devflags |= ISP1760_FLAG_DREQ_POL_HIGH;
+	} else {
+		pr_err("isp1760: no platform data\n");
+		return -ENXIO;
+	}
+
+	ret = isp1760_register(mem_res, irq, irqflags, &pdev->dev, devflags);
+	if (ret < 0)
+		return ret;
+
+	pr_info("ISP1760 USB device initialised\n");
+	return 0;
+}
+
+static int isp1760_plat_remove(struct platform_device *pdev)
+{
+	isp1760_unregister(&pdev->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id isp1760_of_match[] = {
+	{ .compatible = "nxp,usb-isp1760", },
+	{ .compatible = "nxp,usb-isp1761", },
+	{ .compatible = "nxp,usb-isp1763", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, isp1760_of_match);
+#endif
+
+static struct platform_driver isp1760_plat_driver = {
+	.probe	= isp1760_plat_probe,
+	.remove	= isp1760_plat_remove,
+	.driver	= {
+		.name	= "isp1760",
+		.of_match_table = of_match_ptr(isp1760_of_match),
+	},
+};
+
+static int __init isp1760_init(void)
+{
+	int ret, any_ret = -ENODEV;
+
+	isp1760_init_kmem_once();
+
+	ret = platform_driver_register(&isp1760_plat_driver);
+	if (!ret)
+		any_ret = 0;
+#ifdef CONFIG_USB_PCI
+	ret = pci_register_driver(&isp1761_pci_driver);
+	if (!ret)
+		any_ret = 0;
+#endif
+
+	if (any_ret)
+		isp1760_deinit_kmem_cache();
+	return any_ret;
+}
+module_init(isp1760_init);
+
+static void __exit isp1760_exit(void)
+{
+	platform_driver_unregister(&isp1760_plat_driver);
+#ifdef CONFIG_USB_PCI
+	pci_unregister_driver(&isp1761_pci_driver);
+#endif
+	isp1760_deinit_kmem_cache();
+}
+module_exit(isp1760_exit);
diff --git a/drivers/usb/isp1760/isp1760-regs.h b/drivers/usb/isp1760/isp1760-regs.h
new file mode 100644
index 000000000..3a6751197
--- /dev/null
+++ b/drivers/usb/isp1760/isp1760-regs.h
@@ -0,0 +1,308 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Driver for the NXP ISP1760 chip
+ *
+ * Copyright 2021 Linaro, Rui Miguel Silva
+ * Copyright 2014 Laurent Pinchart
+ * Copyright 2007 Sebastian Siewior
+ *
+ * Contacts:
+ *     Sebastian Siewior <bigeasy@linutronix.de>
+ *     Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *     Rui Miguel Silva <rui.silva@linaro.org>
+ */
+
+#ifndef _ISP176x_REGS_H_
+#define _ISP176x_REGS_H_
+
+/* -----------------------------------------------------------------------------
+ * Host Controller
+ */
+
+/* ISP1760/31 */
+/* EHCI capability registers */
+#define ISP176x_HC_VERSION		0x002
+#define ISP176x_HC_HCSPARAMS		0x004
+#define ISP176x_HC_HCCPARAMS		0x008
+
+/* EHCI operational registers */
+#define ISP176x_HC_USBCMD		0x020
+#define ISP176x_HC_USBSTS		0x024
+#define ISP176x_HC_FRINDEX		0x02c
+
+#define ISP176x_HC_CONFIGFLAG		0x060
+#define ISP176x_HC_PORTSC1		0x064
+
+#define ISP176x_HC_ISO_PTD_DONEMAP	0x130
+#define ISP176x_HC_ISO_PTD_SKIPMAP	0x134
+#define ISP176x_HC_ISO_PTD_LASTPTD	0x138
+#define ISP176x_HC_INT_PTD_DONEMAP	0x140
+#define ISP176x_HC_INT_PTD_SKIPMAP	0x144
+#define ISP176x_HC_INT_PTD_LASTPTD	0x148
+#define ISP176x_HC_ATL_PTD_DONEMAP	0x150
+#define ISP176x_HC_ATL_PTD_SKIPMAP	0x154
+#define ISP176x_HC_ATL_PTD_LASTPTD	0x158
+
+/* Configuration Register */
+#define ISP176x_HC_HW_MODE_CTRL		0x300
+#define ISP176x_HC_CHIP_ID		0x304
+#define ISP176x_HC_SCRATCH		0x308
+#define ISP176x_HC_RESET		0x30c
+#define ISP176x_HC_BUFFER_STATUS	0x334
+#define ISP176x_HC_MEMORY		0x33c
+
+/* Interrupt Register */
+#define ISP176x_HC_INTERRUPT		0x310
+#define ISP176x_HC_INTERRUPT_ENABLE	0x314
+#define ISP176x_HC_ISO_IRQ_MASK_OR	0x318
+#define ISP176x_HC_INT_IRQ_MASK_OR	0x31c
+#define ISP176x_HC_ATL_IRQ_MASK_OR	0x320
+#define ISP176x_HC_ISO_IRQ_MASK_AND	0x324
+#define ISP176x_HC_INT_IRQ_MASK_AND	0x328
+#define ISP176x_HC_ATL_IRQ_MASK_AND	0x32c
+
+#define ISP176x_HC_OTG_CTRL		0x374
+#define ISP176x_HC_OTG_CTRL_SET		0x374
+#define ISP176x_HC_OTG_CTRL_CLEAR	0x376
+
+enum isp176x_host_controller_fields {
+	/* HC_PORTSC1 */
+	PORT_OWNER, PORT_POWER, PORT_LSTATUS, PORT_RESET, PORT_SUSPEND,
+	PORT_RESUME, PORT_PE, PORT_CSC, PORT_CONNECT,
+	/* HC_HCSPARAMS */
+	HCS_PPC, HCS_N_PORTS,
+	/* HC_HCCPARAMS */
+	HCC_ISOC_CACHE, HCC_ISOC_THRES,
+	/* HC_USBCMD */
+	CMD_LRESET, CMD_RESET, CMD_RUN,
+	/* HC_USBSTS */
+	STS_PCD,
+	/* HC_FRINDEX */
+	HC_FRINDEX,
+	/* HC_CONFIGFLAG */
+	FLAG_CF,
+	/* ISO/INT/ATL PTD */
+	HC_ISO_PTD_DONEMAP, HC_ISO_PTD_SKIPMAP, HC_ISO_PTD_LASTPTD,
+	HC_INT_PTD_DONEMAP, HC_INT_PTD_SKIPMAP, HC_INT_PTD_LASTPTD,
+	HC_ATL_PTD_DONEMAP, HC_ATL_PTD_SKIPMAP, HC_ATL_PTD_LASTPTD,
+	/* HC_HW_MODE_CTRL */
+	ALL_ATX_RESET, HW_ANA_DIGI_OC, HW_DEV_DMA, HW_COMN_IRQ, HW_COMN_DMA,
+	HW_DATA_BUS_WIDTH, HW_DACK_POL_HIGH, HW_DREQ_POL_HIGH, HW_INTR_HIGH_ACT,
+	HW_INTF_LOCK, HW_INTR_EDGE_TRIG, HW_GLOBAL_INTR_EN,
+	/* HC_CHIP_ID */
+	HC_CHIP_ID_HIGH, HC_CHIP_ID_LOW, HC_CHIP_REV,
+	/* HC_SCRATCH */
+	HC_SCRATCH,
+	/* HC_RESET */
+	SW_RESET_RESET_ATX, SW_RESET_RESET_HC, SW_RESET_RESET_ALL,
+	/* HC_BUFFER_STATUS */
+	ISO_BUF_FILL, INT_BUF_FILL, ATL_BUF_FILL,
+	/* HC_MEMORY */
+	MEM_BANK_SEL, MEM_START_ADDR,
+	/* HC_DATA */
+	HC_DATA,
+	/* HC_INTERRUPT */
+	HC_INTERRUPT,
+	/* HC_INTERRUPT_ENABLE */
+	HC_INT_IRQ_ENABLE, HC_ATL_IRQ_ENABLE,
+	/* INTERRUPT MASKS */
+	HC_ISO_IRQ_MASK_OR, HC_INT_IRQ_MASK_OR, HC_ATL_IRQ_MASK_OR,
+	HC_ISO_IRQ_MASK_AND, HC_INT_IRQ_MASK_AND, HC_ATL_IRQ_MASK_AND,
+	/* HW_OTG_CTRL_SET */
+	HW_OTG_DISABLE, HW_SW_SEL_HC_DC, HW_VBUS_DRV, HW_SEL_CP_EXT,
+	HW_DM_PULLDOWN, HW_DP_PULLDOWN, HW_DP_PULLUP, HW_HC_2_DIS,
+	/* HW_OTG_CTRL_CLR */
+	HW_OTG_DISABLE_CLEAR, HW_SW_SEL_HC_DC_CLEAR, HW_VBUS_DRV_CLEAR,
+	HW_SEL_CP_EXT_CLEAR, HW_DM_PULLDOWN_CLEAR, HW_DP_PULLDOWN_CLEAR,
+	HW_DP_PULLUP_CLEAR, HW_HC_2_DIS_CLEAR,
+	/* Last element */
+	HC_FIELD_MAX,
+};
+
+/* ISP1763 */
+/* EHCI operational registers */
+#define ISP1763_HC_USBCMD		0x8c
+#define ISP1763_HC_USBSTS		0x90
+#define ISP1763_HC_FRINDEX		0x98
+
+#define ISP1763_HC_CONFIGFLAG		0x9c
+#define ISP1763_HC_PORTSC1		0xa0
+
+#define ISP1763_HC_ISO_PTD_DONEMAP	0xa4
+#define ISP1763_HC_ISO_PTD_SKIPMAP	0xa6
+#define ISP1763_HC_ISO_PTD_LASTPTD	0xa8
+#define ISP1763_HC_INT_PTD_DONEMAP	0xaa
+#define ISP1763_HC_INT_PTD_SKIPMAP	0xac
+#define ISP1763_HC_INT_PTD_LASTPTD	0xae
+#define ISP1763_HC_ATL_PTD_DONEMAP	0xb0
+#define ISP1763_HC_ATL_PTD_SKIPMAP	0xb2
+#define ISP1763_HC_ATL_PTD_LASTPTD	0xb4
+
+/* Configuration Register */
+#define ISP1763_HC_HW_MODE_CTRL		0xb6
+#define ISP1763_HC_CHIP_REV		0x70
+#define ISP1763_HC_CHIP_ID		0x72
+#define ISP1763_HC_SCRATCH		0x78
+#define ISP1763_HC_RESET		0xb8
+#define ISP1763_HC_BUFFER_STATUS	0xba
+#define ISP1763_HC_MEMORY		0xc4
+#define ISP1763_HC_DATA			0xc6
+
+/* Interrupt Register */
+#define ISP1763_HC_INTERRUPT		0xd4
+#define ISP1763_HC_INTERRUPT_ENABLE	0xd6
+#define ISP1763_HC_ISO_IRQ_MASK_OR	0xd8
+#define ISP1763_HC_INT_IRQ_MASK_OR	0xda
+#define ISP1763_HC_ATL_IRQ_MASK_OR	0xdc
+#define ISP1763_HC_ISO_IRQ_MASK_AND	0xde
+#define ISP1763_HC_INT_IRQ_MASK_AND	0xe0
+#define ISP1763_HC_ATL_IRQ_MASK_AND	0xe2
+
+#define ISP1763_HC_OTG_CTRL_SET		0xe4
+#define ISP1763_HC_OTG_CTRL_CLEAR	0xe6
+
+/* -----------------------------------------------------------------------------
+ * Peripheral Controller
+ */
+
+#define DC_IEPTX(n)			(1 << (11 + 2 * (n)))
+#define DC_IEPRX(n)			(1 << (10 + 2 * (n)))
+#define DC_IEPRXTX(n)			(3 << (10 + 2 * (n)))
+
+#define ISP176x_DC_CDBGMOD_ACK		BIT(6)
+#define ISP176x_DC_DDBGMODIN_ACK	BIT(4)
+#define ISP176x_DC_DDBGMODOUT_ACK	BIT(2)
+
+#define ISP176x_DC_IEP0SETUP		BIT(8)
+#define ISP176x_DC_IEVBUS		BIT(7)
+#define ISP176x_DC_IEHS_STA		BIT(5)
+#define ISP176x_DC_IERESM		BIT(4)
+#define ISP176x_DC_IESUSP		BIT(3)
+#define ISP176x_DC_IEBRST		BIT(0)
+
+#define ISP176x_HW_OTG_DISABLE_CLEAR	BIT(26)
+#define ISP176x_HW_SW_SEL_HC_DC_CLEAR	BIT(23)
+#define ISP176x_HW_VBUS_DRV_CLEAR	BIT(20)
+#define ISP176x_HW_SEL_CP_EXT_CLEAR	BIT(19)
+#define ISP176x_HW_DM_PULLDOWN_CLEAR	BIT(18)
+#define ISP176x_HW_DP_PULLDOWN_CLEAR	BIT(17)
+#define ISP176x_HW_DP_PULLUP_CLEAR	BIT(16)
+#define ISP176x_HW_OTG_DISABLE		BIT(10)
+#define ISP176x_HW_SW_SEL_HC_DC		BIT(7)
+#define ISP176x_HW_VBUS_DRV		BIT(4)
+#define ISP176x_HW_SEL_CP_EXT		BIT(3)
+#define ISP176x_HW_DM_PULLDOWN		BIT(2)
+#define ISP176x_HW_DP_PULLDOWN		BIT(1)
+#define ISP176x_HW_DP_PULLUP		BIT(0)
+
+#define ISP176x_DC_ENDPTYP_ISOC		0x01
+#define ISP176x_DC_ENDPTYP_BULK		0x02
+#define ISP176x_DC_ENDPTYP_INTERRUPT	0x03
+
+/* Initialization Registers */
+#define ISP176x_DC_ADDRESS		0x0200
+#define ISP176x_DC_MODE			0x020c
+#define ISP176x_DC_INTCONF		0x0210
+#define ISP176x_DC_DEBUG		0x0212
+#define ISP176x_DC_INTENABLE		0x0214
+
+/* Data Flow Registers */
+#define ISP176x_DC_EPMAXPKTSZ		0x0204
+#define ISP176x_DC_EPTYPE		0x0208
+
+#define ISP176x_DC_BUFLEN		0x021c
+#define ISP176x_DC_BUFSTAT		0x021e
+#define ISP176x_DC_DATAPORT		0x0220
+
+#define ISP176x_DC_CTRLFUNC		0x0228
+#define ISP176x_DC_EPINDEX		0x022c
+
+/* DMA Registers */
+#define ISP176x_DC_DMACMD		0x0230
+#define ISP176x_DC_DMATXCOUNT		0x0234
+#define ISP176x_DC_DMACONF		0x0238
+#define ISP176x_DC_DMAHW		0x023c
+#define ISP176x_DC_DMAINTREASON		0x0250
+#define ISP176x_DC_DMAINTEN		0x0254
+#define ISP176x_DC_DMAEP		0x0258
+#define ISP176x_DC_DMABURSTCOUNT	0x0264
+
+/* General Registers */
+#define ISP176x_DC_INTERRUPT		0x0218
+#define ISP176x_DC_CHIPID		0x0270
+#define ISP176x_DC_FRAMENUM		0x0274
+#define ISP176x_DC_SCRATCH		0x0278
+#define ISP176x_DC_UNLOCKDEV		0x027c
+#define ISP176x_DC_INTPULSEWIDTH	0x0280
+#define ISP176x_DC_TESTMODE		0x0284
+
+enum isp176x_device_controller_fields {
+	/* DC_ADDRESS */
+	DC_DEVEN, DC_DEVADDR,
+	/* DC_MODE */
+	DC_VBUSSTAT, DC_SFRESET, DC_GLINTENA,
+	/* DC_INTCONF */
+	DC_CDBGMOD_ACK, DC_DDBGMODIN_ACK, DC_DDBGMODOUT_ACK, DC_INTPOL,
+	/* DC_INTENABLE */
+	DC_IEPRXTX_7, DC_IEPRXTX_6, DC_IEPRXTX_5, DC_IEPRXTX_4, DC_IEPRXTX_3,
+	DC_IEPRXTX_2, DC_IEPRXTX_1, DC_IEPRXTX_0,
+	DC_IEP0SETUP, DC_IEVBUS, DC_IEHS_STA, DC_IERESM, DC_IESUSP, DC_IEBRST,
+	/* DC_EPINDEX */
+	DC_EP0SETUP, DC_ENDPIDX, DC_EPDIR,
+	/* DC_CTRLFUNC */
+	DC_CLBUF, DC_VENDP, DC_DSEN, DC_STATUS, DC_STALL,
+	/* DC_BUFLEN */
+	DC_BUFLEN,
+	/* DC_EPMAXPKTSZ */
+	DC_FFOSZ,
+	/* DC_EPTYPE */
+	DC_EPENABLE, DC_ENDPTYP,
+	/* DC_FRAMENUM */
+	DC_FRAMENUM, DC_UFRAMENUM,
+	/* DC_CHIP_ID */
+	DC_CHIP_ID_HIGH, DC_CHIP_ID_LOW,
+	/* DC_SCRATCH */
+	DC_SCRATCH,
+	/* Last element */
+	DC_FIELD_MAX,
+};
+
+/* ISP1763 */
+/* Initialization Registers */
+#define ISP1763_DC_ADDRESS		0x00
+#define ISP1763_DC_MODE			0x0c
+#define ISP1763_DC_INTCONF		0x10
+#define ISP1763_DC_INTENABLE		0x14
+
+/* Data Flow Registers */
+#define ISP1763_DC_EPMAXPKTSZ		0x04
+#define ISP1763_DC_EPTYPE		0x08
+
+#define ISP1763_DC_BUFLEN		0x1c
+#define ISP1763_DC_BUFSTAT		0x1e
+#define ISP1763_DC_DATAPORT		0x20
+
+#define ISP1763_DC_CTRLFUNC		0x28
+#define ISP1763_DC_EPINDEX		0x2c
+
+/* DMA Registers */
+#define ISP1763_DC_DMACMD		0x30
+#define ISP1763_DC_DMATXCOUNT		0x34
+#define ISP1763_DC_DMACONF		0x38
+#define ISP1763_DC_DMAHW		0x3c
+#define ISP1763_DC_DMAINTREASON		0x50
+#define ISP1763_DC_DMAINTEN		0x54
+#define ISP1763_DC_DMAEP		0x58
+#define ISP1763_DC_DMABURSTCOUNT	0x64
+
+/* General Registers */
+#define ISP1763_DC_INTERRUPT		0x18
+#define ISP1763_DC_CHIPID_LOW		0x70
+#define ISP1763_DC_CHIPID_HIGH		0x72
+#define ISP1763_DC_FRAMENUM		0x74
+#define ISP1763_DC_SCRATCH		0x78
+#define ISP1763_DC_UNLOCKDEV		0x7c
+#define ISP1763_DC_INTPULSEWIDTH	0x80
+#define ISP1763_DC_TESTMODE		0x84
+
+#endif
diff --git a/drivers/usb/isp1760/isp1760-udc.c b/drivers/usb/isp1760/isp1760-udc.c
new file mode 100644
index 000000000..5cafd2334
--- /dev/null
+++ b/drivers/usb/isp1760/isp1760-udc.c
@@ -0,0 +1,1600 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the NXP ISP1761 device controller
+ *
+ * Copyright 2021 Linaro, Rui Miguel Silva
+ * Copyright 2014 Ideas on Board Oy
+ *
+ * Contacts:
+ *	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	Rui Miguel Silva <rui.silva@linaro.org>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/usb.h>
+
+#include "isp1760-core.h"
+#include "isp1760-regs.h"
+#include "isp1760-udc.h"
+
+#define ISP1760_VBUS_POLL_INTERVAL	msecs_to_jiffies(500)
+
+struct isp1760_request {
+	struct usb_request req;
+	struct list_head queue;
+	struct isp1760_ep *ep;
+	unsigned int packet_size;
+};
+
+static inline struct isp1760_udc *gadget_to_udc(struct usb_gadget *gadget)
+{
+	return container_of(gadget, struct isp1760_udc, gadget);
+}
+
+static inline struct isp1760_ep *ep_to_udc_ep(struct usb_ep *ep)
+{
+	return container_of(ep, struct isp1760_ep, ep);
+}
+
+static inline struct isp1760_request *req_to_udc_req(struct usb_request *req)
+{
+	return container_of(req, struct isp1760_request, req);
+}
+
+static u32 isp1760_udc_read(struct isp1760_udc *udc, u16 field)
+{
+	return isp1760_field_read(udc->fields, field);
+}
+
+static void isp1760_udc_write(struct isp1760_udc *udc, u16 field, u32 val)
+{
+	isp1760_field_write(udc->fields, field, val);
+}
+
+static u32 isp1760_udc_read_raw(struct isp1760_udc *udc, u16 reg)
+{
+	__le32 val;
+
+	regmap_raw_read(udc->regs, reg, &val, 4);
+
+	return le32_to_cpu(val);
+}
+
+static u16 isp1760_udc_read_raw16(struct isp1760_udc *udc, u16 reg)
+{
+	__le16 val;
+
+	regmap_raw_read(udc->regs, reg, &val, 2);
+
+	return le16_to_cpu(val);
+}
+
+static void isp1760_udc_write_raw(struct isp1760_udc *udc, u16 reg, u32 val)
+{
+	__le32 val_le = cpu_to_le32(val);
+
+	regmap_raw_write(udc->regs, reg, &val_le, 4);
+}
+
+static void isp1760_udc_write_raw16(struct isp1760_udc *udc, u16 reg, u16 val)
+{
+	__le16 val_le = cpu_to_le16(val);
+
+	regmap_raw_write(udc->regs, reg, &val_le, 2);
+}
+
+static void isp1760_udc_set(struct isp1760_udc *udc, u32 field)
+{
+	isp1760_udc_write(udc, field, 0xFFFFFFFF);
+}
+
+static void isp1760_udc_clear(struct isp1760_udc *udc, u32 field)
+{
+	isp1760_udc_write(udc, field, 0);
+}
+
+static bool isp1760_udc_is_set(struct isp1760_udc *udc, u32 field)
+{
+	return !!isp1760_udc_read(udc, field);
+}
+/* -----------------------------------------------------------------------------
+ * Endpoint Management
+ */
+
+static struct isp1760_ep *isp1760_udc_find_ep(struct isp1760_udc *udc,
+					      u16 index)
+{
+	unsigned int i;
+
+	if (index == 0)
+		return &udc->ep[0];
+
+	for (i = 1; i < ARRAY_SIZE(udc->ep); ++i) {
+		if (udc->ep[i].addr == index)
+			return udc->ep[i].desc ? &udc->ep[i] : NULL;
+	}
+
+	return NULL;
+}
+
+static void __isp1760_udc_select_ep(struct isp1760_udc *udc,
+				    struct isp1760_ep *ep, int dir)
+{
+	isp1760_udc_write(udc, DC_ENDPIDX, ep->addr & USB_ENDPOINT_NUMBER_MASK);
+
+	if (dir == USB_DIR_IN)
+		isp1760_udc_set(udc, DC_EPDIR);
+	else
+		isp1760_udc_clear(udc, DC_EPDIR);
+}
+
+/**
+ * isp1760_udc_select_ep - Select an endpoint for register access
+ * @ep: The endpoint
+ * @udc: Reference to the device controller
+ *
+ * The ISP1761 endpoint registers are banked. This function selects the target
+ * endpoint for banked register access. The selection remains valid until the
+ * next call to this function, the next direct access to the EPINDEX register
+ * or the next reset, whichever comes first.
+ *
+ * Called with the UDC spinlock held.
+ */
+static void isp1760_udc_select_ep(struct isp1760_udc *udc,
+				  struct isp1760_ep *ep)
+{
+	__isp1760_udc_select_ep(udc, ep, ep->addr & USB_ENDPOINT_DIR_MASK);
+}
+
+/* Called with the UDC spinlock held. */
+static void isp1760_udc_ctrl_send_status(struct isp1760_ep *ep, int dir)
+{
+	struct isp1760_udc *udc = ep->udc;
+
+	/*
+	 * Proceed to the status stage. The status stage data packet flows in
+	 * the direction opposite to the data stage data packets, we thus need
+	 * to select the OUT/IN endpoint for IN/OUT transfers.
+	 */
+	if (dir == USB_DIR_IN)
+		isp1760_udc_clear(udc, DC_EPDIR);
+	else
+		isp1760_udc_set(udc, DC_EPDIR);
+
+	isp1760_udc_write(udc, DC_ENDPIDX, 1);
+	isp1760_udc_set(udc, DC_STATUS);
+
+	/*
+	 * The hardware will terminate the request automatically and go back to
+	 * the setup stage without notifying us.
+	 */
+	udc->ep0_state = ISP1760_CTRL_SETUP;
+}
+
+/* Called without the UDC spinlock held. */
+static void isp1760_udc_request_complete(struct isp1760_ep *ep,
+					 struct isp1760_request *req,
+					 int status)
+{
+	struct isp1760_udc *udc = ep->udc;
+	unsigned long flags;
+
+	dev_dbg(ep->udc->isp->dev, "completing request %p with status %d\n",
+		req, status);
+
+	req->ep = NULL;
+	req->req.status = status;
+	req->req.complete(&ep->ep, &req->req);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/*
+	 * When completing control OUT requests, move to the status stage after
+	 * calling the request complete callback. This gives the gadget an
+	 * opportunity to stall the control transfer if needed.
+	 */
+	if (status == 0 && ep->addr == 0 && udc->ep0_dir == USB_DIR_OUT)
+		isp1760_udc_ctrl_send_status(ep, USB_DIR_OUT);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+static void isp1760_udc_ctrl_send_stall(struct isp1760_ep *ep)
+{
+	struct isp1760_udc *udc = ep->udc;
+	unsigned long flags;
+
+	dev_dbg(ep->udc->isp->dev, "%s(ep%02x)\n", __func__, ep->addr);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* Stall both the IN and OUT endpoints. */
+	__isp1760_udc_select_ep(udc, ep, USB_DIR_OUT);
+	isp1760_udc_set(udc, DC_STALL);
+	__isp1760_udc_select_ep(udc, ep, USB_DIR_IN);
+	isp1760_udc_set(udc, DC_STALL);
+
+	/* A protocol stall completes the control transaction. */
+	udc->ep0_state = ISP1760_CTRL_SETUP;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+/* -----------------------------------------------------------------------------
+ * Data Endpoints
+ */
+
+/* Called with the UDC spinlock held. */
+static bool isp1760_udc_receive(struct isp1760_ep *ep,
+				struct isp1760_request *req)
+{
+	struct isp1760_udc *udc = ep->udc;
+	unsigned int len;
+	u32 *buf;
+	int i;
+
+	isp1760_udc_select_ep(udc, ep);
+	len = isp1760_udc_read(udc, DC_BUFLEN);
+
+	dev_dbg(udc->isp->dev, "%s: received %u bytes (%u/%u done)\n",
+		__func__, len, req->req.actual, req->req.length);
+
+	len = min(len, req->req.length - req->req.actual);
+
+	if (!len) {
+		/*
+		 * There's no data to be read from the FIFO, acknowledge the RX
+		 * interrupt by clearing the buffer.
+		 *
+		 * TODO: What if another packet arrives in the meantime ? The
+		 * datasheet doesn't clearly document how this should be
+		 * handled.
+		 */
+		isp1760_udc_set(udc, DC_CLBUF);
+		return false;
+	}
+
+	buf = req->req.buf + req->req.actual;
+
+	/*
+	 * Make sure not to read more than one extra byte, otherwise data from
+	 * the next packet might be removed from the FIFO.
+	 */
+	for (i = len; i > 2; i -= 4, ++buf)
+		*buf = isp1760_udc_read_raw(udc, ISP176x_DC_DATAPORT);
+	if (i > 0)
+		*(u16 *)buf = isp1760_udc_read_raw16(udc, ISP176x_DC_DATAPORT);
+
+	req->req.actual += len;
+
+	/*
+	 * TODO: The short_not_ok flag isn't supported yet, but isn't used by
+	 * any gadget driver either.
+	 */
+
+	dev_dbg(udc->isp->dev,
+		"%s: req %p actual/length %u/%u maxpacket %u packet size %u\n",
+		__func__, req, req->req.actual, req->req.length, ep->maxpacket,
+		len);
+
+	ep->rx_pending = false;
+
+	/*
+	 * Complete the request if all data has been received or if a short
+	 * packet has been received.
+	 */
+	if (req->req.actual == req->req.length || len < ep->maxpacket) {
+		list_del(&req->queue);
+		return true;
+	}
+
+	return false;
+}
+
+static void isp1760_udc_transmit(struct isp1760_ep *ep,
+				 struct isp1760_request *req)
+{
+	struct isp1760_udc *udc = ep->udc;
+	u32 *buf = req->req.buf + req->req.actual;
+	int i;
+
+	req->packet_size = min(req->req.length - req->req.actual,
+			       ep->maxpacket);
+
+	dev_dbg(udc->isp->dev, "%s: transferring %u bytes (%u/%u done)\n",
+		__func__, req->packet_size, req->req.actual,
+		req->req.length);
+
+	__isp1760_udc_select_ep(udc, ep, USB_DIR_IN);
+
+	if (req->packet_size)
+		isp1760_udc_write(udc, DC_BUFLEN, req->packet_size);
+
+	/*
+	 * Make sure not to write more than one extra byte, otherwise extra data
+	 * will stay in the FIFO and will be transmitted during the next control
+	 * request. The endpoint control CLBUF bit is supposed to allow flushing
+	 * the FIFO for this kind of conditions, but doesn't seem to work.
+	 */
+	for (i = req->packet_size; i > 2; i -= 4, ++buf)
+		isp1760_udc_write_raw(udc, ISP176x_DC_DATAPORT, *buf);
+	if (i > 0)
+		isp1760_udc_write_raw16(udc, ISP176x_DC_DATAPORT, *(u16 *)buf);
+
+	if (ep->addr == 0)
+		isp1760_udc_set(udc, DC_DSEN);
+	if (!req->packet_size)
+		isp1760_udc_set(udc, DC_VENDP);
+}
+
+static void isp1760_ep_rx_ready(struct isp1760_ep *ep)
+{
+	struct isp1760_udc *udc = ep->udc;
+	struct isp1760_request *req;
+	bool complete;
+
+	spin_lock(&udc->lock);
+
+	if (ep->addr == 0 && udc->ep0_state != ISP1760_CTRL_DATA_OUT) {
+		spin_unlock(&udc->lock);
+		dev_dbg(udc->isp->dev, "%s: invalid ep0 state %u\n", __func__,
+			udc->ep0_state);
+		return;
+	}
+
+	if (ep->addr != 0 && !ep->desc) {
+		spin_unlock(&udc->lock);
+		dev_dbg(udc->isp->dev, "%s: ep%02x is disabled\n", __func__,
+			ep->addr);
+		return;
+	}
+
+	if (list_empty(&ep->queue)) {
+		ep->rx_pending = true;
+		spin_unlock(&udc->lock);
+		dev_dbg(udc->isp->dev, "%s: ep%02x (%p) has no request queued\n",
+			__func__, ep->addr, ep);
+		return;
+	}
+
+	req = list_first_entry(&ep->queue, struct isp1760_request,
+			       queue);
+	complete = isp1760_udc_receive(ep, req);
+
+	spin_unlock(&udc->lock);
+
+	if (complete)
+		isp1760_udc_request_complete(ep, req, 0);
+}
+
+static void isp1760_ep_tx_complete(struct isp1760_ep *ep)
+{
+	struct isp1760_udc *udc = ep->udc;
+	struct isp1760_request *complete = NULL;
+	struct isp1760_request *req;
+	bool need_zlp;
+
+	spin_lock(&udc->lock);
+
+	if (ep->addr == 0 && udc->ep0_state != ISP1760_CTRL_DATA_IN) {
+		spin_unlock(&udc->lock);
+		dev_dbg(udc->isp->dev, "TX IRQ: invalid endpoint state %u\n",
+			udc->ep0_state);
+		return;
+	}
+
+	if (list_empty(&ep->queue)) {
+		/*
+		 * This can happen for the control endpoint when the reply to
+		 * the GET_STATUS IN control request is sent directly by the
+		 * setup IRQ handler. Just proceed to the status stage.
+		 */
+		if (ep->addr == 0) {
+			isp1760_udc_ctrl_send_status(ep, USB_DIR_IN);
+			spin_unlock(&udc->lock);
+			return;
+		}
+
+		spin_unlock(&udc->lock);
+		dev_dbg(udc->isp->dev, "%s: ep%02x has no request queued\n",
+			__func__, ep->addr);
+		return;
+	}
+
+	req = list_first_entry(&ep->queue, struct isp1760_request,
+			       queue);
+	req->req.actual += req->packet_size;
+
+	need_zlp = req->req.actual == req->req.length &&
+		   !(req->req.length % ep->maxpacket) &&
+		   req->packet_size && req->req.zero;
+
+	dev_dbg(udc->isp->dev,
+		"TX IRQ: req %p actual/length %u/%u maxpacket %u packet size %u zero %u need zlp %u\n",
+		 req, req->req.actual, req->req.length, ep->maxpacket,
+		 req->packet_size, req->req.zero, need_zlp);
+
+	/*
+	 * Complete the request if all data has been sent and we don't need to
+	 * transmit a zero length packet.
+	 */
+	if (req->req.actual == req->req.length && !need_zlp) {
+		complete = req;
+		list_del(&req->queue);
+
+		if (ep->addr == 0)
+			isp1760_udc_ctrl_send_status(ep, USB_DIR_IN);
+
+		if (!list_empty(&ep->queue))
+			req = list_first_entry(&ep->queue,
+					       struct isp1760_request, queue);
+		else
+			req = NULL;
+	}
+
+	/*
+	 * Transmit the next packet or start the next request, if any.
+	 *
+	 * TODO: If the endpoint is stalled the next request shouldn't be
+	 * started, but what about the next packet ?
+	 */
+	if (req)
+		isp1760_udc_transmit(ep, req);
+
+	spin_unlock(&udc->lock);
+
+	if (complete)
+		isp1760_udc_request_complete(ep, complete, 0);
+}
+
+static int __isp1760_udc_set_halt(struct isp1760_ep *ep, bool halt)
+{
+	struct isp1760_udc *udc = ep->udc;
+
+	dev_dbg(udc->isp->dev, "%s: %s halt on ep%02x\n", __func__,
+		halt ? "set" : "clear", ep->addr);
+
+	if (ep->desc && usb_endpoint_xfer_isoc(ep->desc)) {
+		dev_dbg(udc->isp->dev, "%s: ep%02x is isochronous\n", __func__,
+			ep->addr);
+		return -EINVAL;
+	}
+
+	isp1760_udc_select_ep(udc, ep);
+
+	if (halt)
+		isp1760_udc_set(udc, DC_STALL);
+	else
+		isp1760_udc_clear(udc, DC_STALL);
+
+	if (ep->addr == 0) {
+		/* When halting the control endpoint, stall both IN and OUT. */
+		__isp1760_udc_select_ep(udc, ep, USB_DIR_IN);
+		if (halt)
+			isp1760_udc_set(udc, DC_STALL);
+		else
+			isp1760_udc_clear(udc, DC_STALL);
+	} else if (!halt) {
+		/* Reset the data PID by cycling the endpoint enable bit. */
+		isp1760_udc_clear(udc, DC_EPENABLE);
+		isp1760_udc_set(udc, DC_EPENABLE);
+
+		/*
+		 * Disabling the endpoint emptied the transmit FIFO, fill it
+		 * again if a request is pending.
+		 *
+		 * TODO: Does the gadget framework require synchronizatino with
+		 * the TX IRQ handler ?
+		 */
+		if ((ep->addr & USB_DIR_IN) && !list_empty(&ep->queue)) {
+			struct isp1760_request *req;
+
+			req = list_first_entry(&ep->queue,
+					       struct isp1760_request, queue);
+			isp1760_udc_transmit(ep, req);
+		}
+	}
+
+	ep->halted = halt;
+
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * Control Endpoint
+ */
+
+static int isp1760_udc_get_status(struct isp1760_udc *udc,
+				  const struct usb_ctrlrequest *req)
+{
+	struct isp1760_ep *ep;
+	u16 status;
+
+	if (req->wLength != cpu_to_le16(2) || req->wValue != cpu_to_le16(0))
+		return -EINVAL;
+
+	switch (req->bRequestType) {
+	case USB_DIR_IN | USB_RECIP_DEVICE:
+		status = udc->devstatus;
+		break;
+
+	case USB_DIR_IN | USB_RECIP_INTERFACE:
+		status = 0;
+		break;
+
+	case USB_DIR_IN | USB_RECIP_ENDPOINT:
+		ep = isp1760_udc_find_ep(udc, le16_to_cpu(req->wIndex));
+		if (!ep)
+			return -EINVAL;
+
+		status = 0;
+		if (ep->halted)
+			status |= 1 << USB_ENDPOINT_HALT;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	isp1760_udc_set(udc, DC_EPDIR);
+	isp1760_udc_write(udc, DC_ENDPIDX, 1);
+
+	isp1760_udc_write(udc, DC_BUFLEN, 2);
+
+	isp1760_udc_write_raw16(udc, ISP176x_DC_DATAPORT, status);
+
+	isp1760_udc_set(udc, DC_DSEN);
+
+	dev_dbg(udc->isp->dev, "%s: status 0x%04x\n", __func__, status);
+
+	return 0;
+}
+
+static int isp1760_udc_set_address(struct isp1760_udc *udc, u16 addr)
+{
+	if (addr > 127) {
+		dev_dbg(udc->isp->dev, "invalid device address %u\n", addr);
+		return -EINVAL;
+	}
+
+	if (udc->gadget.state != USB_STATE_DEFAULT &&
+	    udc->gadget.state != USB_STATE_ADDRESS) {
+		dev_dbg(udc->isp->dev, "can't set address in state %u\n",
+			udc->gadget.state);
+		return -EINVAL;
+	}
+
+	usb_gadget_set_state(&udc->gadget, addr ? USB_STATE_ADDRESS :
+			     USB_STATE_DEFAULT);
+
+	isp1760_udc_write(udc, DC_DEVADDR, addr);
+	isp1760_udc_set(udc, DC_DEVEN);
+
+	spin_lock(&udc->lock);
+	isp1760_udc_ctrl_send_status(&udc->ep[0], USB_DIR_OUT);
+	spin_unlock(&udc->lock);
+
+	return 0;
+}
+
+static bool isp1760_ep0_setup_standard(struct isp1760_udc *udc,
+				       struct usb_ctrlrequest *req)
+{
+	bool stall;
+
+	switch (req->bRequest) {
+	case USB_REQ_GET_STATUS:
+		return isp1760_udc_get_status(udc, req);
+
+	case USB_REQ_CLEAR_FEATURE:
+		switch (req->bRequestType) {
+		case USB_DIR_OUT | USB_RECIP_DEVICE: {
+			/* TODO: Handle remote wakeup feature. */
+			return true;
+		}
+
+		case USB_DIR_OUT | USB_RECIP_ENDPOINT: {
+			u16 index = le16_to_cpu(req->wIndex);
+			struct isp1760_ep *ep;
+
+			if (req->wLength != cpu_to_le16(0) ||
+			    req->wValue != cpu_to_le16(USB_ENDPOINT_HALT))
+				return true;
+
+			ep = isp1760_udc_find_ep(udc, index);
+			if (!ep)
+				return true;
+
+			spin_lock(&udc->lock);
+
+			/*
+			 * If the endpoint is wedged only the gadget can clear
+			 * the halt feature. Pretend success in that case, but
+			 * keep the endpoint halted.
+			 */
+			if (!ep->wedged)
+				stall = __isp1760_udc_set_halt(ep, false);
+			else
+				stall = false;
+
+			if (!stall)
+				isp1760_udc_ctrl_send_status(&udc->ep[0],
+							     USB_DIR_OUT);
+
+			spin_unlock(&udc->lock);
+			return stall;
+		}
+
+		default:
+			return true;
+		}
+		break;
+
+	case USB_REQ_SET_FEATURE:
+		switch (req->bRequestType) {
+		case USB_DIR_OUT | USB_RECIP_DEVICE: {
+			/* TODO: Handle remote wakeup and test mode features */
+			return true;
+		}
+
+		case USB_DIR_OUT | USB_RECIP_ENDPOINT: {
+			u16 index = le16_to_cpu(req->wIndex);
+			struct isp1760_ep *ep;
+
+			if (req->wLength != cpu_to_le16(0) ||
+			    req->wValue != cpu_to_le16(USB_ENDPOINT_HALT))
+				return true;
+
+			ep = isp1760_udc_find_ep(udc, index);
+			if (!ep)
+				return true;
+
+			spin_lock(&udc->lock);
+
+			stall = __isp1760_udc_set_halt(ep, true);
+			if (!stall)
+				isp1760_udc_ctrl_send_status(&udc->ep[0],
+							     USB_DIR_OUT);
+
+			spin_unlock(&udc->lock);
+			return stall;
+		}
+
+		default:
+			return true;
+		}
+		break;
+
+	case USB_REQ_SET_ADDRESS:
+		if (req->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
+			return true;
+
+		return isp1760_udc_set_address(udc, le16_to_cpu(req->wValue));
+
+	case USB_REQ_SET_CONFIGURATION:
+		if (req->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
+			return true;
+
+		if (udc->gadget.state != USB_STATE_ADDRESS &&
+		    udc->gadget.state != USB_STATE_CONFIGURED)
+			return true;
+
+		stall = udc->driver->setup(&udc->gadget, req) < 0;
+		if (stall)
+			return true;
+
+		usb_gadget_set_state(&udc->gadget, req->wValue ?
+				     USB_STATE_CONFIGURED : USB_STATE_ADDRESS);
+
+		/*
+		 * SET_CONFIGURATION (and SET_INTERFACE) must reset the halt
+		 * feature on all endpoints. There is however no need to do so
+		 * explicitly here as the gadget driver will disable and
+		 * reenable endpoints, clearing the halt feature.
+		 */
+		return false;
+
+	default:
+		return udc->driver->setup(&udc->gadget, req) < 0;
+	}
+}
+
+static void isp1760_ep0_setup(struct isp1760_udc *udc)
+{
+	union {
+		struct usb_ctrlrequest r;
+		u32 data[2];
+	} req;
+	unsigned int count;
+	bool stall = false;
+
+	spin_lock(&udc->lock);
+
+	isp1760_udc_set(udc, DC_EP0SETUP);
+
+	count = isp1760_udc_read(udc, DC_BUFLEN);
+	if (count != sizeof(req)) {
+		spin_unlock(&udc->lock);
+
+		dev_err(udc->isp->dev, "invalid length %u for setup packet\n",
+			count);
+
+		isp1760_udc_ctrl_send_stall(&udc->ep[0]);
+		return;
+	}
+
+	req.data[0] = isp1760_udc_read_raw(udc, ISP176x_DC_DATAPORT);
+	req.data[1] = isp1760_udc_read_raw(udc, ISP176x_DC_DATAPORT);
+
+	if (udc->ep0_state != ISP1760_CTRL_SETUP) {
+		spin_unlock(&udc->lock);
+		dev_dbg(udc->isp->dev, "unexpected SETUP packet\n");
+		return;
+	}
+
+	/* Move to the data stage. */
+	if (!req.r.wLength)
+		udc->ep0_state = ISP1760_CTRL_STATUS;
+	else if (req.r.bRequestType & USB_DIR_IN)
+		udc->ep0_state = ISP1760_CTRL_DATA_IN;
+	else
+		udc->ep0_state = ISP1760_CTRL_DATA_OUT;
+
+	udc->ep0_dir = req.r.bRequestType & USB_DIR_IN;
+	udc->ep0_length = le16_to_cpu(req.r.wLength);
+
+	spin_unlock(&udc->lock);
+
+	dev_dbg(udc->isp->dev,
+		"%s: bRequestType 0x%02x bRequest 0x%02x wValue 0x%04x wIndex 0x%04x wLength 0x%04x\n",
+		__func__, req.r.bRequestType, req.r.bRequest,
+		le16_to_cpu(req.r.wValue), le16_to_cpu(req.r.wIndex),
+		le16_to_cpu(req.r.wLength));
+
+	if ((req.r.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+		stall = isp1760_ep0_setup_standard(udc, &req.r);
+	else
+		stall = udc->driver->setup(&udc->gadget, &req.r) < 0;
+
+	if (stall)
+		isp1760_udc_ctrl_send_stall(&udc->ep[0]);
+}
+
+/* -----------------------------------------------------------------------------
+ * Gadget Endpoint Operations
+ */
+
+static int isp1760_ep_enable(struct usb_ep *ep,
+			     const struct usb_endpoint_descriptor *desc)
+{
+	struct isp1760_ep *uep = ep_to_udc_ep(ep);
+	struct isp1760_udc *udc = uep->udc;
+	unsigned long flags;
+	unsigned int type;
+
+	dev_dbg(uep->udc->isp->dev, "%s\n", __func__);
+
+	/*
+	 * Validate the descriptor. The control endpoint can't be enabled
+	 * manually.
+	 */
+	if (desc->bDescriptorType != USB_DT_ENDPOINT ||
+	    desc->bEndpointAddress == 0 ||
+	    desc->bEndpointAddress != uep->addr ||
+	    le16_to_cpu(desc->wMaxPacketSize) > ep->maxpacket) {
+		dev_dbg(udc->isp->dev,
+			"%s: invalid descriptor type %u addr %02x ep addr %02x max packet size %u/%u\n",
+			__func__, desc->bDescriptorType,
+			desc->bEndpointAddress, uep->addr,
+			le16_to_cpu(desc->wMaxPacketSize), ep->maxpacket);
+		return -EINVAL;
+	}
+
+	switch (usb_endpoint_type(desc)) {
+	case USB_ENDPOINT_XFER_ISOC:
+		type = ISP176x_DC_ENDPTYP_ISOC;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		type = ISP176x_DC_ENDPTYP_BULK;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		type = ISP176x_DC_ENDPTYP_INTERRUPT;
+		break;
+	case USB_ENDPOINT_XFER_CONTROL:
+	default:
+		dev_dbg(udc->isp->dev, "%s: control endpoints unsupported\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	uep->desc = desc;
+	uep->maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	uep->rx_pending = false;
+	uep->halted = false;
+	uep->wedged = false;
+
+	isp1760_udc_select_ep(udc, uep);
+
+	isp1760_udc_write(udc, DC_FFOSZ, uep->maxpacket);
+	isp1760_udc_write(udc, DC_BUFLEN, uep->maxpacket);
+
+	isp1760_udc_write(udc, DC_ENDPTYP, type);
+	isp1760_udc_set(udc, DC_EPENABLE);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int isp1760_ep_disable(struct usb_ep *ep)
+{
+	struct isp1760_ep *uep = ep_to_udc_ep(ep);
+	struct isp1760_udc *udc = uep->udc;
+	struct isp1760_request *req, *nreq;
+	LIST_HEAD(req_list);
+	unsigned long flags;
+
+	dev_dbg(udc->isp->dev, "%s\n", __func__);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (!uep->desc) {
+		dev_dbg(udc->isp->dev, "%s: endpoint not enabled\n", __func__);
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return -EINVAL;
+	}
+
+	uep->desc = NULL;
+	uep->maxpacket = 0;
+
+	isp1760_udc_select_ep(udc, uep);
+	isp1760_udc_clear(udc, DC_EPENABLE);
+	isp1760_udc_clear(udc, DC_ENDPTYP);
+
+	/* TODO Synchronize with the IRQ handler */
+
+	list_splice_init(&uep->queue, &req_list);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	list_for_each_entry_safe(req, nreq, &req_list, queue) {
+		list_del(&req->queue);
+		isp1760_udc_request_complete(uep, req, -ESHUTDOWN);
+	}
+
+	return 0;
+}
+
+static struct usb_request *isp1760_ep_alloc_request(struct usb_ep *ep,
+						    gfp_t gfp_flags)
+{
+	struct isp1760_request *req;
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	return &req->req;
+}
+
+static void isp1760_ep_free_request(struct usb_ep *ep, struct usb_request *_req)
+{
+	struct isp1760_request *req = req_to_udc_req(_req);
+
+	kfree(req);
+}
+
+static int isp1760_ep_queue(struct usb_ep *ep, struct usb_request *_req,
+			    gfp_t gfp_flags)
+{
+	struct isp1760_request *req = req_to_udc_req(_req);
+	struct isp1760_ep *uep = ep_to_udc_ep(ep);
+	struct isp1760_udc *udc = uep->udc;
+	bool complete = false;
+	unsigned long flags;
+	int ret = 0;
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	dev_dbg(udc->isp->dev,
+		"%s: req %p (%u bytes%s) ep %p(0x%02x)\n", __func__, _req,
+		_req->length, _req->zero ? " (zlp)" : "", uep, uep->addr);
+
+	req->ep = uep;
+
+	if (uep->addr == 0) {
+		if (_req->length != udc->ep0_length &&
+		    udc->ep0_state != ISP1760_CTRL_DATA_IN) {
+			dev_dbg(udc->isp->dev,
+				"%s: invalid length %u for req %p\n",
+				__func__, _req->length, req);
+			ret = -EINVAL;
+			goto done;
+		}
+
+		switch (udc->ep0_state) {
+		case ISP1760_CTRL_DATA_IN:
+			dev_dbg(udc->isp->dev, "%s: transmitting req %p\n",
+				__func__, req);
+
+			list_add_tail(&req->queue, &uep->queue);
+			isp1760_udc_transmit(uep, req);
+			break;
+
+		case ISP1760_CTRL_DATA_OUT:
+			list_add_tail(&req->queue, &uep->queue);
+			__isp1760_udc_select_ep(udc, uep, USB_DIR_OUT);
+			isp1760_udc_set(udc, DC_DSEN);
+			break;
+
+		case ISP1760_CTRL_STATUS:
+			complete = true;
+			break;
+
+		default:
+			dev_dbg(udc->isp->dev, "%s: invalid ep0 state\n",
+				__func__);
+			ret = -EINVAL;
+			break;
+		}
+	} else if (uep->desc) {
+		bool empty = list_empty(&uep->queue);
+
+		list_add_tail(&req->queue, &uep->queue);
+		if ((uep->addr & USB_DIR_IN) && !uep->halted && empty)
+			isp1760_udc_transmit(uep, req);
+		else if (!(uep->addr & USB_DIR_IN) && uep->rx_pending)
+			complete = isp1760_udc_receive(uep, req);
+	} else {
+		dev_dbg(udc->isp->dev,
+			"%s: can't queue request to disabled ep%02x\n",
+			__func__, uep->addr);
+		ret = -ESHUTDOWN;
+	}
+
+done:
+	if (ret < 0)
+		req->ep = NULL;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (complete)
+		isp1760_udc_request_complete(uep, req, 0);
+
+	return ret;
+}
+
+static int isp1760_ep_dequeue(struct usb_ep *ep, struct usb_request *_req)
+{
+	struct isp1760_request *req = req_to_udc_req(_req);
+	struct isp1760_ep *uep = ep_to_udc_ep(ep);
+	struct isp1760_udc *udc = uep->udc;
+	unsigned long flags;
+
+	dev_dbg(uep->udc->isp->dev, "%s(ep%02x)\n", __func__, uep->addr);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (req->ep != uep)
+		req = NULL;
+	else
+		list_del(&req->queue);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (!req)
+		return -EINVAL;
+
+	isp1760_udc_request_complete(uep, req, -ECONNRESET);
+	return 0;
+}
+
+static int __isp1760_ep_set_halt(struct isp1760_ep *uep, bool stall, bool wedge)
+{
+	struct isp1760_udc *udc = uep->udc;
+	int ret;
+
+	if (!uep->addr) {
+		/*
+		 * Halting the control endpoint is only valid as a delayed error
+		 * response to a SETUP packet. Make sure EP0 is in the right
+		 * stage and that the gadget isn't trying to clear the halt
+		 * condition.
+		 */
+		if (WARN_ON(udc->ep0_state == ISP1760_CTRL_SETUP || !stall ||
+			     wedge)) {
+			return -EINVAL;
+		}
+	}
+
+	if (uep->addr && !uep->desc) {
+		dev_dbg(udc->isp->dev, "%s: ep%02x is disabled\n", __func__,
+			uep->addr);
+		return -EINVAL;
+	}
+
+	if (uep->addr & USB_DIR_IN) {
+		/* Refuse to halt IN endpoints with active transfers. */
+		if (!list_empty(&uep->queue)) {
+			dev_dbg(udc->isp->dev,
+				"%s: ep%02x has request pending\n", __func__,
+				uep->addr);
+			return -EAGAIN;
+		}
+	}
+
+	ret = __isp1760_udc_set_halt(uep, stall);
+	if (ret < 0)
+		return ret;
+
+	if (!uep->addr) {
+		/*
+		 * Stalling EP0 completes the control transaction, move back to
+		 * the SETUP state.
+		 */
+		udc->ep0_state = ISP1760_CTRL_SETUP;
+		return 0;
+	}
+
+	if (wedge)
+		uep->wedged = true;
+	else if (!stall)
+		uep->wedged = false;
+
+	return 0;
+}
+
+static int isp1760_ep_set_halt(struct usb_ep *ep, int value)
+{
+	struct isp1760_ep *uep = ep_to_udc_ep(ep);
+	unsigned long flags;
+	int ret;
+
+	dev_dbg(uep->udc->isp->dev, "%s: %s halt on ep%02x\n", __func__,
+		value ? "set" : "clear", uep->addr);
+
+	spin_lock_irqsave(&uep->udc->lock, flags);
+	ret = __isp1760_ep_set_halt(uep, value, false);
+	spin_unlock_irqrestore(&uep->udc->lock, flags);
+
+	return ret;
+}
+
+static int isp1760_ep_set_wedge(struct usb_ep *ep)
+{
+	struct isp1760_ep *uep = ep_to_udc_ep(ep);
+	unsigned long flags;
+	int ret;
+
+	dev_dbg(uep->udc->isp->dev, "%s: set wedge on ep%02x)\n", __func__,
+		uep->addr);
+
+	spin_lock_irqsave(&uep->udc->lock, flags);
+	ret = __isp1760_ep_set_halt(uep, true, true);
+	spin_unlock_irqrestore(&uep->udc->lock, flags);
+
+	return ret;
+}
+
+static void isp1760_ep_fifo_flush(struct usb_ep *ep)
+{
+	struct isp1760_ep *uep = ep_to_udc_ep(ep);
+	struct isp1760_udc *udc = uep->udc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	isp1760_udc_select_ep(udc, uep);
+
+	/*
+	 * Set the CLBUF bit twice to flush both buffers in case double
+	 * buffering is enabled.
+	 */
+	isp1760_udc_set(udc, DC_CLBUF);
+	isp1760_udc_set(udc, DC_CLBUF);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+static const struct usb_ep_ops isp1760_ep_ops = {
+	.enable = isp1760_ep_enable,
+	.disable = isp1760_ep_disable,
+	.alloc_request = isp1760_ep_alloc_request,
+	.free_request = isp1760_ep_free_request,
+	.queue = isp1760_ep_queue,
+	.dequeue = isp1760_ep_dequeue,
+	.set_halt = isp1760_ep_set_halt,
+	.set_wedge = isp1760_ep_set_wedge,
+	.fifo_flush = isp1760_ep_fifo_flush,
+};
+
+/* -----------------------------------------------------------------------------
+ * Device States
+ */
+
+/* Called with the UDC spinlock held. */
+static void isp1760_udc_connect(struct isp1760_udc *udc)
+{
+	usb_gadget_set_state(&udc->gadget, USB_STATE_POWERED);
+	mod_timer(&udc->vbus_timer, jiffies + ISP1760_VBUS_POLL_INTERVAL);
+}
+
+/* Called with the UDC spinlock held. */
+static void isp1760_udc_disconnect(struct isp1760_udc *udc)
+{
+	if (udc->gadget.state < USB_STATE_POWERED)
+		return;
+
+	dev_dbg(udc->isp->dev, "Device disconnected in state %u\n",
+		 udc->gadget.state);
+
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	usb_gadget_set_state(&udc->gadget, USB_STATE_ATTACHED);
+
+	if (udc->driver->disconnect)
+		udc->driver->disconnect(&udc->gadget);
+
+	del_timer(&udc->vbus_timer);
+
+	/* TODO Reset all endpoints ? */
+}
+
+static void isp1760_udc_init_hw(struct isp1760_udc *udc)
+{
+	u32 intconf = udc->is_isp1763 ? ISP1763_DC_INTCONF : ISP176x_DC_INTCONF;
+	u32 intena = udc->is_isp1763 ? ISP1763_DC_INTENABLE :
+						ISP176x_DC_INTENABLE;
+
+	/*
+	 * The device controller currently shares its interrupt with the host
+	 * controller, the DC_IRQ polarity and signaling mode are ignored. Set
+	 * the to active-low level-triggered.
+	 *
+	 * Configure the control, in and out pipes to generate interrupts on
+	 * ACK tokens only (and NYET for the out pipe). The default
+	 * configuration also generates an interrupt on the first NACK token.
+	 */
+	isp1760_reg_write(udc->regs, intconf,
+			  ISP176x_DC_CDBGMOD_ACK | ISP176x_DC_DDBGMODIN_ACK |
+			  ISP176x_DC_DDBGMODOUT_ACK);
+
+	isp1760_reg_write(udc->regs, intena, DC_IEPRXTX(7) |
+			  DC_IEPRXTX(6) | DC_IEPRXTX(5) | DC_IEPRXTX(4) |
+			  DC_IEPRXTX(3) | DC_IEPRXTX(2) | DC_IEPRXTX(1) |
+			  DC_IEPRXTX(0) | ISP176x_DC_IEP0SETUP |
+			  ISP176x_DC_IEVBUS | ISP176x_DC_IERESM |
+			  ISP176x_DC_IESUSP | ISP176x_DC_IEHS_STA |
+			  ISP176x_DC_IEBRST);
+
+	if (udc->connected)
+		isp1760_set_pullup(udc->isp, true);
+
+	isp1760_udc_set(udc, DC_DEVEN);
+}
+
+static void isp1760_udc_reset(struct isp1760_udc *udc)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/*
+	 * The bus reset has reset most registers to their default value,
+	 * reinitialize the UDC hardware.
+	 */
+	isp1760_udc_init_hw(udc);
+
+	udc->ep0_state = ISP1760_CTRL_SETUP;
+	udc->gadget.speed = USB_SPEED_FULL;
+
+	usb_gadget_udc_reset(&udc->gadget, udc->driver);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+static void isp1760_udc_suspend(struct isp1760_udc *udc)
+{
+	if (udc->gadget.state < USB_STATE_DEFAULT)
+		return;
+
+	if (udc->driver->suspend)
+		udc->driver->suspend(&udc->gadget);
+}
+
+static void isp1760_udc_resume(struct isp1760_udc *udc)
+{
+	if (udc->gadget.state < USB_STATE_DEFAULT)
+		return;
+
+	if (udc->driver->resume)
+		udc->driver->resume(&udc->gadget);
+}
+
+/* -----------------------------------------------------------------------------
+ * Gadget Operations
+ */
+
+static int isp1760_udc_get_frame(struct usb_gadget *gadget)
+{
+	struct isp1760_udc *udc = gadget_to_udc(gadget);
+
+	return isp1760_udc_read(udc, DC_FRAMENUM);
+}
+
+static int isp1760_udc_wakeup(struct usb_gadget *gadget)
+{
+	struct isp1760_udc *udc = gadget_to_udc(gadget);
+
+	dev_dbg(udc->isp->dev, "%s\n", __func__);
+	return -ENOTSUPP;
+}
+
+static int isp1760_udc_set_selfpowered(struct usb_gadget *gadget,
+				       int is_selfpowered)
+{
+	struct isp1760_udc *udc = gadget_to_udc(gadget);
+
+	if (is_selfpowered)
+		udc->devstatus |= 1 << USB_DEVICE_SELF_POWERED;
+	else
+		udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
+
+	return 0;
+}
+
+static int isp1760_udc_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct isp1760_udc *udc = gadget_to_udc(gadget);
+
+	isp1760_set_pullup(udc->isp, is_on);
+	udc->connected = is_on;
+
+	return 0;
+}
+
+static int isp1760_udc_start(struct usb_gadget *gadget,
+			     struct usb_gadget_driver *driver)
+{
+	struct isp1760_udc *udc = gadget_to_udc(gadget);
+	unsigned long flags;
+
+	/* The hardware doesn't support low speed. */
+	if (driver->max_speed < USB_SPEED_FULL) {
+		dev_err(udc->isp->dev, "Invalid gadget driver\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (udc->driver) {
+		dev_err(udc->isp->dev, "UDC already has a gadget driver\n");
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return -EBUSY;
+	}
+
+	udc->driver = driver;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	dev_dbg(udc->isp->dev, "starting UDC with driver %s\n",
+		driver->function);
+
+	udc->devstatus = 0;
+	udc->connected = true;
+
+	usb_gadget_set_state(&udc->gadget, USB_STATE_ATTACHED);
+
+	/* DMA isn't supported yet, don't enable the DMA clock. */
+	isp1760_udc_set(udc, DC_GLINTENA);
+
+	isp1760_udc_init_hw(udc);
+
+	dev_dbg(udc->isp->dev, "UDC started with driver %s\n",
+		driver->function);
+
+	return 0;
+}
+
+static int isp1760_udc_stop(struct usb_gadget *gadget)
+{
+	struct isp1760_udc *udc = gadget_to_udc(gadget);
+	u32 mode_reg = udc->is_isp1763 ? ISP1763_DC_MODE : ISP176x_DC_MODE;
+	unsigned long flags;
+
+	dev_dbg(udc->isp->dev, "%s\n", __func__);
+
+	del_timer_sync(&udc->vbus_timer);
+
+	isp1760_reg_write(udc->regs, mode_reg, 0);
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->driver = NULL;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops isp1760_udc_ops = {
+	.get_frame = isp1760_udc_get_frame,
+	.wakeup = isp1760_udc_wakeup,
+	.set_selfpowered = isp1760_udc_set_selfpowered,
+	.pullup = isp1760_udc_pullup,
+	.udc_start = isp1760_udc_start,
+	.udc_stop = isp1760_udc_stop,
+};
+
+/* -----------------------------------------------------------------------------
+ * Interrupt Handling
+ */
+
+static u32 isp1760_udc_irq_get_status(struct isp1760_udc *udc)
+{
+	u32 status;
+
+	if (udc->is_isp1763) {
+		status = isp1760_reg_read(udc->regs, ISP1763_DC_INTERRUPT)
+			& isp1760_reg_read(udc->regs, ISP1763_DC_INTENABLE);
+		isp1760_reg_write(udc->regs, ISP1763_DC_INTERRUPT, status);
+	} else {
+		status = isp1760_reg_read(udc->regs, ISP176x_DC_INTERRUPT)
+			& isp1760_reg_read(udc->regs, ISP176x_DC_INTENABLE);
+		isp1760_reg_write(udc->regs, ISP176x_DC_INTERRUPT, status);
+	}
+
+	return status;
+}
+
+static irqreturn_t isp1760_udc_irq(int irq, void *dev)
+{
+	struct isp1760_udc *udc = dev;
+	unsigned int i;
+	u32 status;
+
+	status = isp1760_udc_irq_get_status(udc);
+
+	if (status & ISP176x_DC_IEVBUS) {
+		dev_dbg(udc->isp->dev, "%s(VBUS)\n", __func__);
+		/* The VBUS interrupt is only triggered when VBUS appears. */
+		spin_lock(&udc->lock);
+		isp1760_udc_connect(udc);
+		spin_unlock(&udc->lock);
+	}
+
+	if (status & ISP176x_DC_IEBRST) {
+		dev_dbg(udc->isp->dev, "%s(BRST)\n", __func__);
+
+		isp1760_udc_reset(udc);
+	}
+
+	for (i = 0; i <= 7; ++i) {
+		struct isp1760_ep *ep = &udc->ep[i*2];
+
+		if (status & DC_IEPTX(i)) {
+			dev_dbg(udc->isp->dev, "%s(EPTX%u)\n", __func__, i);
+			isp1760_ep_tx_complete(ep);
+		}
+
+		if (status & DC_IEPRX(i)) {
+			dev_dbg(udc->isp->dev, "%s(EPRX%u)\n", __func__, i);
+			isp1760_ep_rx_ready(i ? ep - 1 : ep);
+		}
+	}
+
+	if (status & ISP176x_DC_IEP0SETUP) {
+		dev_dbg(udc->isp->dev, "%s(EP0SETUP)\n", __func__);
+
+		isp1760_ep0_setup(udc);
+	}
+
+	if (status & ISP176x_DC_IERESM) {
+		dev_dbg(udc->isp->dev, "%s(RESM)\n", __func__);
+		isp1760_udc_resume(udc);
+	}
+
+	if (status & ISP176x_DC_IESUSP) {
+		dev_dbg(udc->isp->dev, "%s(SUSP)\n", __func__);
+
+		spin_lock(&udc->lock);
+		if (!isp1760_udc_is_set(udc, DC_VBUSSTAT))
+			isp1760_udc_disconnect(udc);
+		else
+			isp1760_udc_suspend(udc);
+		spin_unlock(&udc->lock);
+	}
+
+	if (status & ISP176x_DC_IEHS_STA) {
+		dev_dbg(udc->isp->dev, "%s(HS_STA)\n", __func__);
+		udc->gadget.speed = USB_SPEED_HIGH;
+	}
+
+	return status ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static void isp1760_udc_vbus_poll(struct timer_list *t)
+{
+	struct isp1760_udc *udc = from_timer(udc, t, vbus_timer);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (!(isp1760_udc_is_set(udc, DC_VBUSSTAT)))
+		isp1760_udc_disconnect(udc);
+	else if (udc->gadget.state >= USB_STATE_POWERED)
+		mod_timer(&udc->vbus_timer,
+			  jiffies + ISP1760_VBUS_POLL_INTERVAL);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+/* -----------------------------------------------------------------------------
+ * Registration
+ */
+
+static void isp1760_udc_init_eps(struct isp1760_udc *udc)
+{
+	unsigned int i;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+
+	for (i = 0; i < ARRAY_SIZE(udc->ep); ++i) {
+		struct isp1760_ep *ep = &udc->ep[i];
+		unsigned int ep_num = (i + 1) / 2;
+		bool is_in = !(i & 1);
+
+		ep->udc = udc;
+
+		INIT_LIST_HEAD(&ep->queue);
+
+		ep->addr = (ep_num && is_in ? USB_DIR_IN : USB_DIR_OUT)
+			 | ep_num;
+		ep->desc = NULL;
+
+		sprintf(ep->name, "ep%u%s", ep_num,
+			ep_num ? (is_in ? "in" : "out") : "");
+
+		ep->ep.ops = &isp1760_ep_ops;
+		ep->ep.name = ep->name;
+
+		/*
+		 * Hardcode the maximum packet sizes for now, to 64 bytes for
+		 * the control endpoint and 512 bytes for all other endpoints.
+		 * This fits in the 8kB FIFO without double-buffering.
+		 */
+		if (ep_num == 0) {
+			usb_ep_set_maxpacket_limit(&ep->ep, 64);
+			ep->ep.caps.type_control = true;
+			ep->ep.caps.dir_in = true;
+			ep->ep.caps.dir_out = true;
+			ep->maxpacket = 64;
+			udc->gadget.ep0 = &ep->ep;
+		} else {
+			usb_ep_set_maxpacket_limit(&ep->ep, 512);
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+			ep->maxpacket = 0;
+			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+		}
+
+		if (is_in)
+			ep->ep.caps.dir_in = true;
+		else
+			ep->ep.caps.dir_out = true;
+	}
+}
+
+static int isp1760_udc_init(struct isp1760_udc *udc)
+{
+	u32 mode_reg = udc->is_isp1763 ? ISP1763_DC_MODE : ISP176x_DC_MODE;
+	u16 scratch;
+	u32 chipid;
+
+	/*
+	 * Check that the controller is present by writing to the scratch
+	 * register, modifying the bus pattern by reading from the chip ID
+	 * register, and reading the scratch register value back. The chip ID
+	 * and scratch register contents must match the expected values.
+	 */
+	isp1760_udc_write(udc, DC_SCRATCH, 0xbabe);
+	chipid = isp1760_udc_read(udc, DC_CHIP_ID_HIGH) << 16;
+	chipid |= isp1760_udc_read(udc, DC_CHIP_ID_LOW);
+	scratch = isp1760_udc_read(udc, DC_SCRATCH);
+
+	if (scratch != 0xbabe) {
+		dev_err(udc->isp->dev,
+			"udc: scratch test failed (0x%04x/0x%08x)\n",
+			scratch, chipid);
+		return -ENODEV;
+	}
+
+	if (chipid != 0x00011582 && chipid != 0x00158210 &&
+	    chipid != 0x00176320) {
+		dev_err(udc->isp->dev, "udc: invalid chip ID 0x%08x\n", chipid);
+		return -ENODEV;
+	}
+
+	/* Reset the device controller. */
+	isp1760_udc_set(udc, DC_SFRESET);
+	usleep_range(10000, 11000);
+	isp1760_reg_write(udc->regs, mode_reg, 0);
+	usleep_range(10000, 11000);
+
+	return 0;
+}
+
+int isp1760_udc_register(struct isp1760_device *isp, int irq,
+			 unsigned long irqflags)
+{
+	struct isp1760_udc *udc = &isp->udc;
+	int ret;
+
+	udc->irq = -1;
+	udc->isp = isp;
+
+	spin_lock_init(&udc->lock);
+	timer_setup(&udc->vbus_timer, isp1760_udc_vbus_poll, 0);
+
+	ret = isp1760_udc_init(udc);
+	if (ret < 0)
+		return ret;
+
+	udc->irqname = kasprintf(GFP_KERNEL, "%s (udc)", dev_name(isp->dev));
+	if (!udc->irqname)
+		return -ENOMEM;
+
+	ret = request_irq(irq, isp1760_udc_irq, IRQF_SHARED | irqflags,
+			  udc->irqname, udc);
+	if (ret < 0)
+		goto error;
+
+	udc->irq = irq;
+
+	/*
+	 * Initialize the gadget static fields and register its device. Gadget
+	 * fields that vary during the life time of the gadget are initialized
+	 * by the UDC core.
+	 */
+	udc->gadget.ops = &isp1760_udc_ops;
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->gadget.max_speed = USB_SPEED_HIGH;
+	udc->gadget.name = "isp1761_udc";
+
+	isp1760_udc_init_eps(udc);
+
+	ret = usb_add_gadget_udc(isp->dev, &udc->gadget);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	if (udc->irq >= 0)
+		free_irq(udc->irq, udc);
+	kfree(udc->irqname);
+
+	return ret;
+}
+
+void isp1760_udc_unregister(struct isp1760_device *isp)
+{
+	struct isp1760_udc *udc = &isp->udc;
+
+	if (!udc->isp)
+		return;
+
+	usb_del_gadget_udc(&udc->gadget);
+
+	free_irq(udc->irq, udc);
+	kfree(udc->irqname);
+}
diff --git a/drivers/usb/isp1760/isp1760-udc.h b/drivers/usb/isp1760/isp1760-udc.h
new file mode 100644
index 000000000..22044e86b
--- /dev/null
+++ b/drivers/usb/isp1760/isp1760-udc.h
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Driver for the NXP ISP1761 device controller
+ *
+ * Copyright 2021 Linaro, Rui Miguel Silva
+ * Copyright 2014 Ideas on Board Oy
+ *
+ * Contacts:
+ *	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	Rui Miguel Silva <rui.silva@linaro.org>
+ */
+
+#ifndef _ISP1760_UDC_H_
+#define _ISP1760_UDC_H_
+
+#include <linux/ioport.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/usb/gadget.h>
+
+#include "isp1760-regs.h"
+
+struct isp1760_device;
+struct isp1760_udc;
+
+enum isp1760_ctrl_state {
+	ISP1760_CTRL_SETUP,		/* Waiting for a SETUP transaction */
+	ISP1760_CTRL_DATA_IN,		/* Setup received, data IN stage */
+	ISP1760_CTRL_DATA_OUT,		/* Setup received, data OUT stage */
+	ISP1760_CTRL_STATUS,		/* 0-length request in status stage */
+};
+
+struct isp1760_ep {
+	struct isp1760_udc *udc;
+	struct usb_ep ep;
+
+	struct list_head queue;
+
+	unsigned int addr;
+	unsigned int maxpacket;
+	char name[7];
+
+	const struct usb_endpoint_descriptor *desc;
+
+	bool rx_pending;
+	bool halted;
+	bool wedged;
+};
+
+/**
+ * struct isp1760_udc - UDC state information
+ * irq: IRQ number
+ * irqname: IRQ name (as passed to request_irq)
+ * regs: regmap for UDC registers
+ * driver: Gadget driver
+ * gadget: Gadget device
+ * lock: Protects driver, vbus_timer, ep, ep0_*, DC_EPINDEX register
+ * ep: Array of endpoints
+ * ep0_state: Control request state for endpoint 0
+ * ep0_dir: Direction of the current control request
+ * ep0_length: Length of the current control request
+ * connected: Tracks gadget driver bus connection state
+ */
+struct isp1760_udc {
+	struct isp1760_device *isp;
+
+	int irq;
+	char *irqname;
+
+	struct regmap *regs;
+	struct regmap_field *fields[DC_FIELD_MAX];
+
+	struct usb_gadget_driver *driver;
+	struct usb_gadget gadget;
+
+	spinlock_t lock;
+	struct timer_list vbus_timer;
+
+	struct isp1760_ep ep[15];
+
+	enum isp1760_ctrl_state ep0_state;
+	u8 ep0_dir;
+	u16 ep0_length;
+
+	bool connected;
+	bool is_isp1763;
+
+	unsigned int devstatus;
+};
+
+#ifdef CONFIG_USB_ISP1761_UDC
+int isp1760_udc_register(struct isp1760_device *isp, int irq,
+			 unsigned long irqflags);
+void isp1760_udc_unregister(struct isp1760_device *isp);
+#else
+static inline int isp1760_udc_register(struct isp1760_device *isp, int irq,
+				       unsigned long irqflags)
+{
+	return 0;
+}
+
+static inline void isp1760_udc_unregister(struct isp1760_device *isp)
+{
+}
+#endif
+
+#endif
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
new file mode 100644
index 000000000..9367c12c7
--- /dev/null
+++ b/drivers/usb/misc/Kconfig
@@ -0,0 +1,313 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Miscellaneous driver configuration
+#
+comment "USB Miscellaneous drivers"
+
+config USB_EMI62
+	tristate "EMI 6|2m USB Audio interface support"
+	help
+	  This driver loads firmware to Emagic EMI 6|2m low latency USB
+	  Audio and Midi interface.
+
+	  After firmware load the device is handled with standard linux
+	  USB Audio driver.
+
+	  This code is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called audio. If you want to compile it as a
+	  module, say M here and read <file:Documentation/kbuild/modules.rst>.
+
+config USB_EMI26
+	tristate "EMI 2|6 USB Audio interface support"
+	help
+	  This driver loads firmware to Emagic EMI 2|6 low latency USB
+	  Audio interface.
+
+	  After firmware load the device is handled with standard linux
+	  USB Audio driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called emi26.
+
+config USB_ADUTUX
+	tristate "ADU devices from Ontrak Control Systems"
+	help
+	  Say Y if you want to use an ADU device from Ontrak Control
+	  Systems.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called adutux.
+
+config USB_SEVSEG
+	tristate "USB 7-Segment LED Display"
+	help
+	  Say Y here if you have a USB 7-Segment Display by Delcom
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbsevseg.
+
+config USB_LEGOTOWER
+	tristate "USB Lego Infrared Tower support"
+	help
+	  Say Y here if you want to connect a USB Lego Infrared Tower to your
+	  computer's USB port.
+
+	  This code is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called legousbtower. If you want to compile it as
+	  a module, say M here and read
+	  <file:Documentation/kbuild/modules.rst>.
+
+config USB_LCD
+	tristate "USB LCD driver support"
+	help
+	  Say Y here if you want to connect an USBLCD to your computer's
+	  USB port. The USBLCD is a small USB interface board for
+	  alphanumeric LCD modules. See <http://www.usblcd.de/> for more
+	  information.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usblcd.
+
+config USB_CYPRESS_CY7C63
+	tristate "Cypress CY7C63xxx USB driver support"
+	help
+	  Say Y here if you want to connect a Cypress CY7C63xxx
+	  micro controller to your computer's USB port. Currently this
+	  driver supports the pre-programmed devices (incl. firmware)
+	  by AK Modul-Bus Computer GmbH.
+
+	  Please see: https://www.ak-modul-bus.de/stat/mikrocontroller.html
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cypress_cy7c63.
+
+config USB_CYTHERM
+	tristate "Cypress USB thermometer driver support"
+	help
+	  Say Y here if you want to connect a Cypress USB thermometer
+	  device to your computer's USB port. This device is also known
+	  as the Cypress USB Starter kit or demo board. The Elektor
+	  magazine published a modified version of this device in issue 
+	  #291.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cytherm.
+
+config USB_IDMOUSE
+	tristate "Siemens ID USB Mouse Fingerprint sensor support"
+	help
+	  Say Y here if you want to use the fingerprint sensor on
+	  the Siemens ID Mouse. There is also a Siemens ID Mouse
+	  _Professional_, which has not been tested with this driver,
+	  but uses the same sensor and may therefore work.
+
+	  This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX",
+	  which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm".
+
+	  See also <https://www.fs.tum.de/~echtler/idmouse/>.
+
+config USB_FTDI_ELAN
+	tristate "Elan PCMCIA CardBus Adapter USB Client"
+	help
+	  ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.
+	  Currently only the U132 adapter is available.
+
+	  The U132 is specifically designed for CardBus PC cards that contain
+	  an OHCI host controller. Typical PC cards are the Orange Mobile 3G
+	  Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work
+	  with PC cards that do not contain an OHCI controller. To use a U132
+	  adapter you will need this "ftdi-elan" module as well as the "u132-hcd"
+	  module which is a USB host controller driver that talks to the OHCI
+	  controller within CardBus card that are inserted in the U132 adapter.
+
+	  This driver has been tested with a CardBus OHCI USB adapter, and
+	  worked with a USB PEN Drive inserted into the first USB port of
+	  the PCCARD. A rather pointless thing to do, but useful for testing.
+
+	  See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller"
+
+	  It is safe to say M here.
+
+config USB_APPLEDISPLAY
+	tristate "Apple Cinema Display support"
+	select BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to control the backlight of Apple Cinema
+	  Displays over USB. This driver provides a sysfs interface.
+
+config USB_QCOM_EUD
+	tristate "QCOM Embedded USB Debugger(EUD) Driver"
+	depends on ARCH_QCOM || COMPILE_TEST
+	select USB_ROLE_SWITCH
+	help
+	  This module enables support for Qualcomm Technologies, Inc.
+	  Embedded USB Debugger (EUD). The EUD is a control peripheral
+	  which reports VBUS attach/detach events and has USB-based
+	  debug and trace capabilities. On selecting m, the module name
+	  that is built is qcom_eud.ko
+
+config APPLE_MFI_FASTCHARGE
+	tristate "Fast charge control for iOS devices"
+	select POWER_SUPPLY
+	help
+	  Say Y here if you want to control whether iOS devices will
+	  fast charge from the USB interface, as implemented in "MFi"
+	  chargers.
+
+	  It is safe to say M here.
+
+source "drivers/usb/misc/sisusbvga/Kconfig"
+
+config USB_LD
+	tristate "USB LD driver"
+	help
+	  This driver is for generic USB devices that use interrupt transfers,
+	  like LD Didactic's USB devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ldusb.
+
+config USB_TRANCEVIBRATOR
+	tristate "PlayStation 2 Trance Vibrator driver support"
+	help
+	  Say Y here if you want to connect a PlayStation 2 Trance Vibrator
+	  device to your computer's USB port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called trancevibrator.
+
+config USB_IOWARRIOR
+	tristate "IO Warrior driver support"
+	help
+	  Say Y here if you want to support the IO Warrior devices from Code
+	  Mercenaries.  This includes support for the following devices:
+	  	IO Warrior 40
+		IO Warrior 24
+		IO Warrior 56
+		IO Warrior 24 Power Vampire
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called iowarrior.
+
+config USB_TEST
+	tristate "USB testing driver"
+	help
+	  This driver is for testing host controller software.  It is used
+	  with specialized device firmware for regression and stress testing,
+	  to help prevent problems from cropping up with "real" drivers.
+
+	  See <http://www.linux-usb.org/usbtest/> for more information,
+	  including sample test device firmware and "how to use it".
+
+config USB_EHSET_TEST_FIXTURE
+	tristate "USB EHSET Test Fixture driver"
+	help
+	  Say Y here if you want to support the special test fixture device
+	  used for the USB-IF Embedded Host High-Speed Electrical Test procedure.
+
+	  When the test fixture is connected, it can enumerate as one of several
+	  VID/PID pairs. This driver then initiates a corresponding test mode on
+	  the downstream port to which the test fixture is attached.
+
+	  See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more
+	  information.
+
+config USB_ISIGHTFW
+	tristate "iSight firmware loading support"
+	select FW_LOADER
+	help
+	  This driver loads firmware for USB Apple iSight cameras, allowing
+	  them to be driven by the USB video class driver available at
+	  http://linux-uvc.berlios.de
+
+	  The firmware for this driver must be extracted from the MacOS
+	  driver beforehand. Tools for doing so are available at
+	  http://bersace03.free.fr
+
+config USB_YUREX
+	tristate "USB YUREX driver support"
+	help
+	  Say Y here if you want to connect a YUREX to your computer's
+	  USB port. The YUREX is a leg-shakes sensor. See
+	  <http://bbu.kayac.com/en/> for further information.
+	  This driver supports read/write of leg-shakes counter and
+	  fasync for the counter update via a device file /dev/yurex*.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called yurex.
+
+config USB_EZUSB_FX2
+	tristate "Functions for loading firmware on EZUSB chips"
+	help
+	  Say Y here if you need EZUSB device support.
+	  (Cypress FX/FX2/FX2LP microcontrollers)
+
+config USB_HUB_USB251XB
+	tristate "USB251XB Hub Controller Configuration Driver"
+	depends on I2C
+	help
+	  This option enables support for configuration via SMBus of the
+	  Microchip USB251x/xBi USB 2.0 Hub Controller series. Configuration
+	  parameters may be set in devicetree or platform data.
+	  Say Y or M here if you need to configure such a device via SMBus.
+
+config USB_HSIC_USB3503
+	tristate "USB3503 HSIC to USB20 Driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
+
+config USB_HSIC_USB4604
+	tristate "USB4604 HSIC to USB20 Driver"
+	depends on I2C
+	help
+	  This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver.
+
+config USB_LINK_LAYER_TEST
+	tristate "USB Link Layer Test driver"
+	help
+	  This driver is for generating specific traffic for Super Speed Link
+	  Layer Test Device. Say Y only when you want to conduct USB Super Speed
+	  Link Layer Test for host controllers.
+
+config USB_CHAOSKEY
+	tristate "ChaosKey random number generator driver support"
+	depends on HW_RANDOM
+	help
+	  Say Y here if you want to connect an AltusMetrum ChaosKey or
+	  Araneus Alea I to your computer's USB port. These devices
+	  are hardware random number generators which hook into the
+	  kernel entropy pool to ensure a large supply of entropy for
+	  /dev/random and /dev/urandom and also provides direct access
+	  via /dev/chaoskeyX
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called chaoskey.
+
+config BRCM_USB_PINMAP
+	tristate "Broadcom pinmap driver support"
+	depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST
+	default ARCH_BRCMSTB && PHY_BRCM_USB
+	help
+	  This option enables support for remapping some USB external
+	  signals, which are typically on dedicated pins on the chip,
+	  to any gpio.
+
+config USB_ONBOARD_HUB
+	tristate "Onboard USB hub support"
+	depends on OF || COMPILE_TEST
+	help
+	  Say Y here if you want to support discrete onboard USB hubs that
+	  don't require an additional control bus for initialization, but
+	  need some non-trivial form of initialization, such as enabling a
+	  power regulator. An example for such a hub is the Realtek
+	  RTS5411.
+
+	  This driver can be used as a module but its state (module vs
+	  builtin) must match the state of the USB subsystem. Enabling
+	  this config will enable the driver and it will automatically
+	  match the state of the USB subsystem. If this driver is a
+	  module it will be called onboard_usb_hub.
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
new file mode 100644
index 000000000..93581baec
--- /dev/null
+++ b/drivers/usb/misc/Makefile
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the rest of the USB drivers
+# (the ones that don't fit into any other categories)
+#
+obj-$(CONFIG_USB_ADUTUX)		+= adutux.o
+obj-$(CONFIG_USB_APPLEDISPLAY)		+= appledisplay.o
+obj-$(CONFIG_USB_CYPRESS_CY7C63)	+= cypress_cy7c63.o
+obj-$(CONFIG_USB_CYTHERM)		+= cytherm.o
+obj-$(CONFIG_USB_EMI26)			+= emi26.o
+obj-$(CONFIG_USB_EMI62)			+= emi62.o
+obj-$(CONFIG_USB_EZUSB_FX2)		+= ezusb.o
+obj-$(CONFIG_USB_FTDI_ELAN)		+= ftdi-elan.o
+obj-$(CONFIG_APPLE_MFI_FASTCHARGE)	+= apple-mfi-fastcharge.o
+obj-$(CONFIG_USB_IDMOUSE)		+= idmouse.o
+obj-$(CONFIG_USB_IOWARRIOR)		+= iowarrior.o
+obj-$(CONFIG_USB_ISIGHTFW)		+= isight_firmware.o
+obj-$(CONFIG_USB_LCD)			+= usblcd.o
+obj-$(CONFIG_USB_LD)			+= ldusb.o
+obj-$(CONFIG_USB_LEGOTOWER)		+= legousbtower.o
+obj-$(CONFIG_USB_QCOM_EUD)		+= qcom_eud.o
+obj-$(CONFIG_USB_TEST)			+= usbtest.o
+obj-$(CONFIG_USB_EHSET_TEST_FIXTURE)    += ehset.o
+obj-$(CONFIG_USB_TRANCEVIBRATOR)	+= trancevibrator.o
+obj-$(CONFIG_USB_USS720)		+= uss720.o
+obj-$(CONFIG_USB_SEVSEG)		+= usbsevseg.o
+obj-$(CONFIG_USB_YUREX)			+= yurex.o
+obj-$(CONFIG_USB_HUB_USB251XB)		+= usb251xb.o
+obj-$(CONFIG_USB_HSIC_USB3503)		+= usb3503.o
+obj-$(CONFIG_USB_HSIC_USB4604)		+= usb4604.o
+obj-$(CONFIG_USB_CHAOSKEY)		+= chaoskey.o
+
+obj-$(CONFIG_USB_SISUSBVGA)		+= sisusbvga/
+obj-$(CONFIG_USB_LINK_LAYER_TEST)	+= lvstest.o
+obj-$(CONFIG_BRCM_USB_PINMAP)		+= brcmstb-usb-pinmap.o
+obj-$(CONFIG_USB_ONBOARD_HUB)		+= onboard_usb_hub.o
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
new file mode 100644
index 000000000..ed6a19254
--- /dev/null
+++ b/drivers/usb/misc/adutux.c
@@ -0,0 +1,796 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * adutux - driver for ADU devices from Ontrak Control Systems
+ * This is an experimental driver. Use at your own risk.
+ * This driver is not supported by Ontrak Control Systems.
+ *
+ * Copyright (c) 2003 John Homppi (SCO, leave this notice here)
+ *
+ * derived from the Lego USB Tower driver 0.56:
+ * Copyright (c) 2003 David Glance <davidgsf@sourceforge.net>
+ *               2001 Juergen Stuber <stuber@loria.fr>
+ * that was derived from USB Skeleton driver - 0.5
+ * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/sched/signal.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+
+#define DRIVER_AUTHOR "John Homppi"
+#define DRIVER_DESC "adutux (see www.ontrak.net)"
+
+/* Define these values to match your device */
+#define ADU_VENDOR_ID 0x0a07
+#define ADU_PRODUCT_ID 0x0064
+
+/* table of devices that work with this driver */
+static const struct usb_device_id device_table[] = {
+	{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID) },		/* ADU100 */
+	{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+20) },	/* ADU120 */
+	{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+30) },	/* ADU130 */
+	{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+100) },	/* ADU200 */
+	{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+108) },	/* ADU208 */
+	{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+118) },	/* ADU218 */
+	{ } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, device_table);
+
+#ifdef CONFIG_USB_DYNAMIC_MINORS
+#define ADU_MINOR_BASE	0
+#else
+#define ADU_MINOR_BASE	67
+#endif
+
+/* we can have up to this number of device plugged in at once */
+#define MAX_DEVICES	16
+
+#define COMMAND_TIMEOUT	(2*HZ)
+
+/*
+ * The locking scheme is a vanilla 3-lock:
+ *   adu_device.buflock: A spinlock, covers what IRQs touch.
+ *   adutux_mutex:       A Static lock to cover open_count. It would also cover
+ *                       any globals, but we don't have them in 2.6.
+ *   adu_device.mtx:     A mutex to hold across sleepers like copy_from_user.
+ *                       It covers all of adu_device, except the open_count
+ *                       and what .buflock covers.
+ */
+
+/* Structure to hold all of our device specific stuff */
+struct adu_device {
+	struct mutex		mtx;
+	struct usb_device *udev; /* save off the usb device pointer */
+	struct usb_interface *interface;
+	unsigned int		minor; /* the starting minor number for this device */
+	char			serial_number[8];
+
+	int			open_count; /* number of times this port has been opened */
+	unsigned long		disconnected:1;
+
+	char		*read_buffer_primary;
+	int			read_buffer_length;
+	char		*read_buffer_secondary;
+	int			secondary_head;
+	int			secondary_tail;
+	spinlock_t		buflock;
+
+	wait_queue_head_t	read_wait;
+	wait_queue_head_t	write_wait;
+
+	char		*interrupt_in_buffer;
+	struct usb_endpoint_descriptor *interrupt_in_endpoint;
+	struct urb	*interrupt_in_urb;
+	int			read_urb_finished;
+
+	char		*interrupt_out_buffer;
+	struct usb_endpoint_descriptor *interrupt_out_endpoint;
+	struct urb	*interrupt_out_urb;
+	int			out_urb_finished;
+};
+
+static DEFINE_MUTEX(adutux_mutex);
+
+static struct usb_driver adu_driver;
+
+static inline void adu_debug_data(struct device *dev, const char *function,
+				  int size, const unsigned char *data)
+{
+	dev_dbg(dev, "%s - length = %d, data = %*ph\n",
+		function, size, size, data);
+}
+
+/*
+ * adu_abort_transfers
+ *      aborts transfers and frees associated data structures
+ */
+static void adu_abort_transfers(struct adu_device *dev)
+{
+	unsigned long flags;
+
+	if (dev->disconnected)
+		return;
+
+	/* shutdown transfer */
+
+	/* XXX Anchor these instead */
+	spin_lock_irqsave(&dev->buflock, flags);
+	if (!dev->read_urb_finished) {
+		spin_unlock_irqrestore(&dev->buflock, flags);
+		usb_kill_urb(dev->interrupt_in_urb);
+	} else
+		spin_unlock_irqrestore(&dev->buflock, flags);
+
+	spin_lock_irqsave(&dev->buflock, flags);
+	if (!dev->out_urb_finished) {
+		spin_unlock_irqrestore(&dev->buflock, flags);
+		wait_event_timeout(dev->write_wait, dev->out_urb_finished,
+			COMMAND_TIMEOUT);
+		usb_kill_urb(dev->interrupt_out_urb);
+	} else
+		spin_unlock_irqrestore(&dev->buflock, flags);
+}
+
+static void adu_delete(struct adu_device *dev)
+{
+	/* free data structures */
+	usb_free_urb(dev->interrupt_in_urb);
+	usb_free_urb(dev->interrupt_out_urb);
+	kfree(dev->read_buffer_primary);
+	kfree(dev->read_buffer_secondary);
+	kfree(dev->interrupt_in_buffer);
+	kfree(dev->interrupt_out_buffer);
+	usb_put_dev(dev->udev);
+	kfree(dev);
+}
+
+static void adu_interrupt_in_callback(struct urb *urb)
+{
+	struct adu_device *dev = urb->context;
+	int status = urb->status;
+	unsigned long flags;
+
+	adu_debug_data(&dev->udev->dev, __func__,
+		       urb->actual_length, urb->transfer_buffer);
+
+	spin_lock_irqsave(&dev->buflock, flags);
+
+	if (status != 0) {
+		if ((status != -ENOENT) && (status != -ECONNRESET) &&
+			(status != -ESHUTDOWN)) {
+			dev_dbg(&dev->udev->dev,
+				"%s : nonzero status received: %d\n",
+				__func__, status);
+		}
+		goto exit;
+	}
+
+	if (urb->actual_length > 0 && dev->interrupt_in_buffer[0] != 0x00) {
+		if (dev->read_buffer_length <
+		    (4 * usb_endpoint_maxp(dev->interrupt_in_endpoint)) -
+		     (urb->actual_length)) {
+			memcpy (dev->read_buffer_primary +
+				dev->read_buffer_length,
+				dev->interrupt_in_buffer, urb->actual_length);
+
+			dev->read_buffer_length += urb->actual_length;
+			dev_dbg(&dev->udev->dev, "%s reading  %d\n", __func__,
+				urb->actual_length);
+		} else {
+			dev_dbg(&dev->udev->dev, "%s : read_buffer overflow\n",
+				__func__);
+		}
+	}
+
+exit:
+	dev->read_urb_finished = 1;
+	spin_unlock_irqrestore(&dev->buflock, flags);
+	/* always wake up so we recover from errors */
+	wake_up_interruptible(&dev->read_wait);
+}
+
+static void adu_interrupt_out_callback(struct urb *urb)
+{
+	struct adu_device *dev = urb->context;
+	int status = urb->status;
+	unsigned long flags;
+
+	adu_debug_data(&dev->udev->dev, __func__,
+		       urb->actual_length, urb->transfer_buffer);
+
+	if (status != 0) {
+		if ((status != -ENOENT) &&
+		    (status != -ESHUTDOWN) &&
+		    (status != -ECONNRESET)) {
+			dev_dbg(&dev->udev->dev,
+				"%s :nonzero status received: %d\n", __func__,
+				status);
+		}
+		return;
+	}
+
+	spin_lock_irqsave(&dev->buflock, flags);
+	dev->out_urb_finished = 1;
+	wake_up(&dev->write_wait);
+	spin_unlock_irqrestore(&dev->buflock, flags);
+}
+
+static int adu_open(struct inode *inode, struct file *file)
+{
+	struct adu_device *dev = NULL;
+	struct usb_interface *interface;
+	int subminor;
+	int retval;
+
+	subminor = iminor(inode);
+
+	retval = mutex_lock_interruptible(&adutux_mutex);
+	if (retval)
+		goto exit_no_lock;
+
+	interface = usb_find_interface(&adu_driver, subminor);
+	if (!interface) {
+		pr_err("%s - error, can't find device for minor %d\n",
+		       __func__, subminor);
+		retval = -ENODEV;
+		goto exit_no_device;
+	}
+
+	dev = usb_get_intfdata(interface);
+	if (!dev) {
+		retval = -ENODEV;
+		goto exit_no_device;
+	}
+
+	/* check that nobody else is using the device */
+	if (dev->open_count) {
+		retval = -EBUSY;
+		goto exit_no_device;
+	}
+
+	++dev->open_count;
+	dev_dbg(&dev->udev->dev, "%s: open count %d\n", __func__,
+		dev->open_count);
+
+	/* save device in the file's private structure */
+	file->private_data = dev;
+
+	/* initialize in direction */
+	dev->read_buffer_length = 0;
+
+	/* fixup first read by having urb waiting for it */
+	usb_fill_int_urb(dev->interrupt_in_urb, dev->udev,
+			 usb_rcvintpipe(dev->udev,
+					dev->interrupt_in_endpoint->bEndpointAddress),
+			 dev->interrupt_in_buffer,
+			 usb_endpoint_maxp(dev->interrupt_in_endpoint),
+			 adu_interrupt_in_callback, dev,
+			 dev->interrupt_in_endpoint->bInterval);
+	dev->read_urb_finished = 0;
+	if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL))
+		dev->read_urb_finished = 1;
+	/* we ignore failure */
+	/* end of fixup for first read */
+
+	/* initialize out direction */
+	dev->out_urb_finished = 1;
+
+	retval = 0;
+
+exit_no_device:
+	mutex_unlock(&adutux_mutex);
+exit_no_lock:
+	return retval;
+}
+
+static void adu_release_internal(struct adu_device *dev)
+{
+	/* decrement our usage count for the device */
+	--dev->open_count;
+	dev_dbg(&dev->udev->dev, "%s : open count %d\n", __func__,
+		dev->open_count);
+	if (dev->open_count <= 0) {
+		adu_abort_transfers(dev);
+		dev->open_count = 0;
+	}
+}
+
+static int adu_release(struct inode *inode, struct file *file)
+{
+	struct adu_device *dev;
+	int retval = 0;
+
+	if (file == NULL) {
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	dev = file->private_data;
+	if (dev == NULL) {
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	mutex_lock(&adutux_mutex); /* not interruptible */
+
+	if (dev->open_count <= 0) {
+		dev_dbg(&dev->udev->dev, "%s : device not opened\n", __func__);
+		retval = -ENODEV;
+		goto unlock;
+	}
+
+	adu_release_internal(dev);
+	if (dev->disconnected) {
+		/* the device was unplugged before the file was released */
+		if (!dev->open_count)	/* ... and we're the last user */
+			adu_delete(dev);
+	}
+unlock:
+	mutex_unlock(&adutux_mutex);
+exit:
+	return retval;
+}
+
+static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
+			loff_t *ppos)
+{
+	struct adu_device *dev;
+	size_t bytes_read = 0;
+	size_t bytes_to_read = count;
+	int retval = 0;
+	int timeout = 0;
+	int should_submit = 0;
+	unsigned long flags;
+	DECLARE_WAITQUEUE(wait, current);
+
+	dev = file->private_data;
+	if (mutex_lock_interruptible(&dev->mtx))
+		return -ERESTARTSYS;
+
+	/* verify that the device wasn't unplugged */
+	if (dev->disconnected) {
+		retval = -ENODEV;
+		pr_err("No device or device unplugged %d\n", retval);
+		goto exit;
+	}
+
+	/* verify that some data was requested */
+	if (count == 0) {
+		dev_dbg(&dev->udev->dev, "%s : read request of 0 bytes\n",
+			__func__);
+		goto exit;
+	}
+
+	timeout = COMMAND_TIMEOUT;
+	dev_dbg(&dev->udev->dev, "%s : about to start looping\n", __func__);
+	while (bytes_to_read) {
+		size_t data_in_secondary = dev->secondary_tail - dev->secondary_head;
+		dev_dbg(&dev->udev->dev,
+			"%s : while, data_in_secondary=%zu, status=%d\n",
+			__func__, data_in_secondary,
+			dev->interrupt_in_urb->status);
+
+		if (data_in_secondary) {
+			/* drain secondary buffer */
+			size_t amount = min(bytes_to_read, data_in_secondary);
+			if (copy_to_user(buffer, dev->read_buffer_secondary+dev->secondary_head, amount)) {
+				retval = -EFAULT;
+				goto exit;
+			}
+			dev->secondary_head += amount;
+			bytes_read += amount;
+			bytes_to_read -= amount;
+		} else {
+			/* we check the primary buffer */
+			spin_lock_irqsave (&dev->buflock, flags);
+			if (dev->read_buffer_length) {
+				/* we secure access to the primary */
+				dev_dbg(&dev->udev->dev,
+					"%s : swap, read_buffer_length = %d\n",
+					__func__, dev->read_buffer_length);
+				swap(dev->read_buffer_primary, dev->read_buffer_secondary);
+				dev->secondary_head = 0;
+				dev->secondary_tail = dev->read_buffer_length;
+				dev->read_buffer_length = 0;
+				spin_unlock_irqrestore(&dev->buflock, flags);
+				/* we have a free buffer so use it */
+				should_submit = 1;
+			} else {
+				/* even the primary was empty - we may need to do IO */
+				if (!dev->read_urb_finished) {
+					/* somebody is doing IO */
+					spin_unlock_irqrestore(&dev->buflock, flags);
+					dev_dbg(&dev->udev->dev,
+						"%s : submitted already\n",
+						__func__);
+				} else {
+					/* we must initiate input */
+					dev_dbg(&dev->udev->dev,
+						"%s : initiate input\n",
+						__func__);
+					dev->read_urb_finished = 0;
+					spin_unlock_irqrestore(&dev->buflock, flags);
+
+					usb_fill_int_urb(dev->interrupt_in_urb, dev->udev,
+							usb_rcvintpipe(dev->udev,
+								dev->interrupt_in_endpoint->bEndpointAddress),
+							 dev->interrupt_in_buffer,
+							 usb_endpoint_maxp(dev->interrupt_in_endpoint),
+							 adu_interrupt_in_callback,
+							 dev,
+							 dev->interrupt_in_endpoint->bInterval);
+					retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+					if (retval) {
+						dev->read_urb_finished = 1;
+						if (retval == -ENOMEM) {
+							retval = bytes_read ? bytes_read : -ENOMEM;
+						}
+						dev_dbg(&dev->udev->dev,
+							"%s : submit failed\n",
+							__func__);
+						goto exit;
+					}
+				}
+
+				/* we wait for I/O to complete */
+				set_current_state(TASK_INTERRUPTIBLE);
+				add_wait_queue(&dev->read_wait, &wait);
+				spin_lock_irqsave(&dev->buflock, flags);
+				if (!dev->read_urb_finished) {
+					spin_unlock_irqrestore(&dev->buflock, flags);
+					timeout = schedule_timeout(COMMAND_TIMEOUT);
+				} else {
+					spin_unlock_irqrestore(&dev->buflock, flags);
+					set_current_state(TASK_RUNNING);
+				}
+				remove_wait_queue(&dev->read_wait, &wait);
+
+				if (timeout <= 0) {
+					dev_dbg(&dev->udev->dev,
+						"%s : timeout\n", __func__);
+					retval = bytes_read ? bytes_read : -ETIMEDOUT;
+					goto exit;
+				}
+
+				if (signal_pending(current)) {
+					dev_dbg(&dev->udev->dev,
+						"%s : signal pending\n",
+						__func__);
+					retval = bytes_read ? bytes_read : -EINTR;
+					goto exit;
+				}
+			}
+		}
+	}
+
+	retval = bytes_read;
+	/* if the primary buffer is empty then use it */
+	spin_lock_irqsave(&dev->buflock, flags);
+	if (should_submit && dev->read_urb_finished) {
+		dev->read_urb_finished = 0;
+		spin_unlock_irqrestore(&dev->buflock, flags);
+		usb_fill_int_urb(dev->interrupt_in_urb, dev->udev,
+				 usb_rcvintpipe(dev->udev,
+					dev->interrupt_in_endpoint->bEndpointAddress),
+				dev->interrupt_in_buffer,
+				usb_endpoint_maxp(dev->interrupt_in_endpoint),
+				adu_interrupt_in_callback,
+				dev,
+				dev->interrupt_in_endpoint->bInterval);
+		if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL) != 0)
+			dev->read_urb_finished = 1;
+		/* we ignore failure */
+	} else {
+		spin_unlock_irqrestore(&dev->buflock, flags);
+	}
+
+exit:
+	/* unlock the device */
+	mutex_unlock(&dev->mtx);
+
+	return retval;
+}
+
+static ssize_t adu_write(struct file *file, const __user char *buffer,
+			 size_t count, loff_t *ppos)
+{
+	DECLARE_WAITQUEUE(waita, current);
+	struct adu_device *dev;
+	size_t bytes_written = 0;
+	size_t bytes_to_write;
+	size_t buffer_size;
+	unsigned long flags;
+	int retval;
+
+	dev = file->private_data;
+
+	retval = mutex_lock_interruptible(&dev->mtx);
+	if (retval)
+		goto exit_nolock;
+
+	/* verify that the device wasn't unplugged */
+	if (dev->disconnected) {
+		retval = -ENODEV;
+		pr_err("No device or device unplugged %d\n", retval);
+		goto exit;
+	}
+
+	/* verify that we actually have some data to write */
+	if (count == 0) {
+		dev_dbg(&dev->udev->dev, "%s : write request of 0 bytes\n",
+			__func__);
+		goto exit;
+	}
+
+	while (count > 0) {
+		add_wait_queue(&dev->write_wait, &waita);
+		set_current_state(TASK_INTERRUPTIBLE);
+		spin_lock_irqsave(&dev->buflock, flags);
+		if (!dev->out_urb_finished) {
+			spin_unlock_irqrestore(&dev->buflock, flags);
+
+			mutex_unlock(&dev->mtx);
+			if (signal_pending(current)) {
+				dev_dbg(&dev->udev->dev, "%s : interrupted\n",
+					__func__);
+				set_current_state(TASK_RUNNING);
+				retval = -EINTR;
+				goto exit_onqueue;
+			}
+			if (schedule_timeout(COMMAND_TIMEOUT) == 0) {
+				dev_dbg(&dev->udev->dev,
+					"%s - command timed out.\n", __func__);
+				retval = -ETIMEDOUT;
+				goto exit_onqueue;
+			}
+			remove_wait_queue(&dev->write_wait, &waita);
+			retval = mutex_lock_interruptible(&dev->mtx);
+			if (retval) {
+				retval = bytes_written ? bytes_written : retval;
+				goto exit_nolock;
+			}
+
+			dev_dbg(&dev->udev->dev,
+				"%s : in progress, count = %zd\n",
+				__func__, count);
+		} else {
+			spin_unlock_irqrestore(&dev->buflock, flags);
+			set_current_state(TASK_RUNNING);
+			remove_wait_queue(&dev->write_wait, &waita);
+			dev_dbg(&dev->udev->dev, "%s : sending, count = %zd\n",
+				__func__, count);
+
+			/* write the data into interrupt_out_buffer from userspace */
+			buffer_size = usb_endpoint_maxp(dev->interrupt_out_endpoint);
+			bytes_to_write = count > buffer_size ? buffer_size : count;
+			dev_dbg(&dev->udev->dev,
+				"%s : buffer_size = %zd, count = %zd, bytes_to_write = %zd\n",
+				__func__, buffer_size, count, bytes_to_write);
+
+			if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write) != 0) {
+				retval = -EFAULT;
+				goto exit;
+			}
+
+			/* send off the urb */
+			usb_fill_int_urb(
+				dev->interrupt_out_urb,
+				dev->udev,
+				usb_sndintpipe(dev->udev, dev->interrupt_out_endpoint->bEndpointAddress),
+				dev->interrupt_out_buffer,
+				bytes_to_write,
+				adu_interrupt_out_callback,
+				dev,
+				dev->interrupt_out_endpoint->bInterval);
+			dev->interrupt_out_urb->actual_length = bytes_to_write;
+			dev->out_urb_finished = 0;
+			retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL);
+			if (retval < 0) {
+				dev->out_urb_finished = 1;
+				dev_err(&dev->udev->dev, "Couldn't submit "
+					"interrupt_out_urb %d\n", retval);
+				goto exit;
+			}
+
+			buffer += bytes_to_write;
+			count -= bytes_to_write;
+
+			bytes_written += bytes_to_write;
+		}
+	}
+	mutex_unlock(&dev->mtx);
+	return bytes_written;
+
+exit:
+	mutex_unlock(&dev->mtx);
+exit_nolock:
+	return retval;
+
+exit_onqueue:
+	remove_wait_queue(&dev->write_wait, &waita);
+	return retval;
+}
+
+/* file operations needed when we register this driver */
+static const struct file_operations adu_fops = {
+	.owner = THIS_MODULE,
+	.read  = adu_read,
+	.write = adu_write,
+	.open = adu_open,
+	.release = adu_release,
+	.llseek = noop_llseek,
+};
+
+/*
+ * usb class driver info in order to get a minor number from the usb core,
+ * and to have the device registered with devfs and the driver core
+ */
+static struct usb_class_driver adu_class = {
+	.name = "usb/adutux%d",
+	.fops = &adu_fops,
+	.minor_base = ADU_MINOR_BASE,
+};
+
+/*
+ * adu_probe
+ *
+ * Called by the usb core when a new device is connected that it thinks
+ * this driver might be interested in.
+ */
+static int adu_probe(struct usb_interface *interface,
+		     const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct adu_device *dev = NULL;
+	int retval = -ENOMEM;
+	int in_end_size;
+	int out_end_size;
+	int res;
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(struct adu_device), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	mutex_init(&dev->mtx);
+	spin_lock_init(&dev->buflock);
+	dev->udev = usb_get_dev(udev);
+	init_waitqueue_head(&dev->read_wait);
+	init_waitqueue_head(&dev->write_wait);
+
+	res = usb_find_common_endpoints_reverse(interface->cur_altsetting,
+			NULL, NULL,
+			&dev->interrupt_in_endpoint,
+			&dev->interrupt_out_endpoint);
+	if (res) {
+		dev_err(&interface->dev, "interrupt endpoints not found\n");
+		retval = res;
+		goto error;
+	}
+
+	in_end_size = usb_endpoint_maxp(dev->interrupt_in_endpoint);
+	out_end_size = usb_endpoint_maxp(dev->interrupt_out_endpoint);
+
+	dev->read_buffer_primary = kmalloc((4 * in_end_size), GFP_KERNEL);
+	if (!dev->read_buffer_primary)
+		goto error;
+
+	/* debug code prime the buffer */
+	memset(dev->read_buffer_primary, 'a', in_end_size);
+	memset(dev->read_buffer_primary + in_end_size, 'b', in_end_size);
+	memset(dev->read_buffer_primary + (2 * in_end_size), 'c', in_end_size);
+	memset(dev->read_buffer_primary + (3 * in_end_size), 'd', in_end_size);
+
+	dev->read_buffer_secondary = kmalloc((4 * in_end_size), GFP_KERNEL);
+	if (!dev->read_buffer_secondary)
+		goto error;
+
+	/* debug code prime the buffer */
+	memset(dev->read_buffer_secondary, 'e', in_end_size);
+	memset(dev->read_buffer_secondary + in_end_size, 'f', in_end_size);
+	memset(dev->read_buffer_secondary + (2 * in_end_size), 'g', in_end_size);
+	memset(dev->read_buffer_secondary + (3 * in_end_size), 'h', in_end_size);
+
+	dev->interrupt_in_buffer = kmalloc(in_end_size, GFP_KERNEL);
+	if (!dev->interrupt_in_buffer)
+		goto error;
+
+	/* debug code prime the buffer */
+	memset(dev->interrupt_in_buffer, 'i', in_end_size);
+
+	dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->interrupt_in_urb)
+		goto error;
+	dev->interrupt_out_buffer = kmalloc(out_end_size, GFP_KERNEL);
+	if (!dev->interrupt_out_buffer)
+		goto error;
+	dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->interrupt_out_urb)
+		goto error;
+
+	if (!usb_string(udev, udev->descriptor.iSerialNumber, dev->serial_number,
+			sizeof(dev->serial_number))) {
+		dev_err(&interface->dev, "Could not retrieve serial number\n");
+		retval = -EIO;
+		goto error;
+	}
+	dev_dbg(&interface->dev, "serial_number=%s", dev->serial_number);
+
+	/* we can register the device now, as it is ready */
+	usb_set_intfdata(interface, dev);
+
+	retval = usb_register_dev(interface, &adu_class);
+
+	if (retval) {
+		/* something prevented us from registering this driver */
+		dev_err(&interface->dev, "Not able to get a minor for this device.\n");
+		usb_set_intfdata(interface, NULL);
+		goto error;
+	}
+
+	dev->minor = interface->minor;
+
+	/* let the user know what node this device is now attached to */
+	dev_info(&interface->dev, "ADU%d %s now attached to /dev/usb/adutux%d\n",
+		 le16_to_cpu(udev->descriptor.idProduct), dev->serial_number,
+		 (dev->minor - ADU_MINOR_BASE));
+
+	return 0;
+
+error:
+	adu_delete(dev);
+	return retval;
+}
+
+/*
+ * adu_disconnect
+ *
+ * Called by the usb core when the device is removed from the system.
+ */
+static void adu_disconnect(struct usb_interface *interface)
+{
+	struct adu_device *dev;
+
+	dev = usb_get_intfdata(interface);
+
+	usb_deregister_dev(interface, &adu_class);
+
+	usb_poison_urb(dev->interrupt_in_urb);
+	usb_poison_urb(dev->interrupt_out_urb);
+
+	mutex_lock(&adutux_mutex);
+	usb_set_intfdata(interface, NULL);
+
+	mutex_lock(&dev->mtx);	/* not interruptible */
+	dev->disconnected = 1;
+	mutex_unlock(&dev->mtx);
+
+	/* if the device is not opened, then we clean up right now */
+	if (!dev->open_count)
+		adu_delete(dev);
+
+	mutex_unlock(&adutux_mutex);
+}
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver adu_driver = {
+	.name = "adutux",
+	.probe = adu_probe,
+	.disconnect = adu_disconnect,
+	.id_table = device_table,
+};
+
+module_usb_driver(adu_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/apple-mfi-fastcharge.c b/drivers/usb/misc/apple-mfi-fastcharge.c
new file mode 100644
index 000000000..ac8695195
--- /dev/null
+++ b/drivers/usb/misc/apple-mfi-fastcharge.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Fast-charge control for Apple "MFi" devices
+ *
+ * Copyright (C) 2019 Bastien Nocera <hadess@hadess.net>
+ */
+
+/* Standard include files */
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+MODULE_AUTHOR("Bastien Nocera <hadess@hadess.net>");
+MODULE_DESCRIPTION("Fast-charge control for Apple \"MFi\" devices");
+MODULE_LICENSE("GPL");
+
+#define TRICKLE_CURRENT_MA		0
+#define FAST_CURRENT_MA			2500
+
+#define APPLE_VENDOR_ID			0x05ac	/* Apple */
+
+/* The product ID is defined as starting with 0x12nn, as per the
+ * "Choosing an Apple Device USB Configuration" section in
+ * release R9 (2012) of the "MFi Accessory Hardware Specification"
+ *
+ * To distinguish an Apple device, a USB host can check the device
+ * descriptor of attached USB devices for the following fields:
+ * ■ Vendor ID: 0x05AC
+ * ■ Product ID: 0x12nn
+ *
+ * Those checks will be done in .match() and .probe().
+ */
+
+static const struct usb_device_id mfi_fc_id_table[] = {
+	{ .idVendor = APPLE_VENDOR_ID,
+	  .match_flags = USB_DEVICE_ID_MATCH_VENDOR },
+	{},
+};
+
+MODULE_DEVICE_TABLE(usb, mfi_fc_id_table);
+
+/* Driver-local specific stuff */
+struct mfi_device {
+	struct usb_device *udev;
+	struct power_supply *battery;
+	int charge_type;
+};
+
+static int apple_mfi_fc_set_charge_type(struct mfi_device *mfi,
+					const union power_supply_propval *val)
+{
+	int current_ma;
+	int retval;
+	__u8 request_type;
+
+	if (mfi->charge_type == val->intval) {
+		dev_dbg(&mfi->udev->dev, "charge type %d already set\n",
+				mfi->charge_type);
+		return 0;
+	}
+
+	switch (val->intval) {
+	case POWER_SUPPLY_CHARGE_TYPE_TRICKLE:
+		current_ma = TRICKLE_CURRENT_MA;
+		break;
+	case POWER_SUPPLY_CHARGE_TYPE_FAST:
+		current_ma = FAST_CURRENT_MA;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	request_type = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
+	retval = usb_control_msg(mfi->udev, usb_sndctrlpipe(mfi->udev, 0),
+				 0x40, /* Vendor‐defined power request */
+				 request_type,
+				 current_ma, /* wValue, current offset */
+				 current_ma, /* wIndex, current offset */
+				 NULL, 0, USB_CTRL_GET_TIMEOUT);
+	if (retval) {
+		dev_dbg(&mfi->udev->dev, "retval = %d\n", retval);
+		return retval;
+	}
+
+	mfi->charge_type = val->intval;
+
+	return 0;
+}
+
+static int apple_mfi_fc_get_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		union power_supply_propval *val)
+{
+	struct mfi_device *mfi = power_supply_get_drvdata(psy);
+
+	dev_dbg(&mfi->udev->dev, "prop: %d\n", psp);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		val->intval = mfi->charge_type;
+		break;
+	case POWER_SUPPLY_PROP_SCOPE:
+		val->intval = POWER_SUPPLY_SCOPE_DEVICE;
+		break;
+	default:
+		return -ENODATA;
+	}
+
+	return 0;
+}
+
+static int apple_mfi_fc_set_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		const union power_supply_propval *val)
+{
+	struct mfi_device *mfi = power_supply_get_drvdata(psy);
+	int ret;
+
+	dev_dbg(&mfi->udev->dev, "prop: %d\n", psp);
+
+	ret = pm_runtime_get_sync(&mfi->udev->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(&mfi->udev->dev);
+		return ret;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = apple_mfi_fc_set_charge_type(mfi, val);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	pm_runtime_mark_last_busy(&mfi->udev->dev);
+	pm_runtime_put_autosuspend(&mfi->udev->dev);
+
+	return ret;
+}
+
+static int apple_mfi_fc_property_is_writeable(struct power_supply *psy,
+					      enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static enum power_supply_property apple_mfi_fc_properties[] = {
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_SCOPE
+};
+
+static const struct power_supply_desc apple_mfi_fc_desc = {
+	.name                   = "apple_mfi_fastcharge",
+	.type                   = POWER_SUPPLY_TYPE_BATTERY,
+	.properties             = apple_mfi_fc_properties,
+	.num_properties         = ARRAY_SIZE(apple_mfi_fc_properties),
+	.get_property           = apple_mfi_fc_get_property,
+	.set_property           = apple_mfi_fc_set_property,
+	.property_is_writeable  = apple_mfi_fc_property_is_writeable
+};
+
+static bool mfi_fc_match(struct usb_device *udev)
+{
+	int idProduct;
+
+	idProduct = le16_to_cpu(udev->descriptor.idProduct);
+	/* See comment above mfi_fc_id_table[] */
+	return (idProduct >= 0x1200 && idProduct <= 0x12ff);
+}
+
+static int mfi_fc_probe(struct usb_device *udev)
+{
+	struct power_supply_config battery_cfg = {};
+	struct mfi_device *mfi = NULL;
+	int err;
+
+	if (!mfi_fc_match(udev))
+		return -ENODEV;
+
+	mfi = kzalloc(sizeof(struct mfi_device), GFP_KERNEL);
+	if (!mfi)
+		return -ENOMEM;
+
+	battery_cfg.drv_data = mfi;
+
+	mfi->charge_type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+	mfi->battery = power_supply_register(&udev->dev,
+						&apple_mfi_fc_desc,
+						&battery_cfg);
+	if (IS_ERR(mfi->battery)) {
+		dev_err(&udev->dev, "Can't register battery\n");
+		err = PTR_ERR(mfi->battery);
+		kfree(mfi);
+		return err;
+	}
+
+	mfi->udev = usb_get_dev(udev);
+	dev_set_drvdata(&udev->dev, mfi);
+
+	return 0;
+}
+
+static void mfi_fc_disconnect(struct usb_device *udev)
+{
+	struct mfi_device *mfi;
+
+	mfi = dev_get_drvdata(&udev->dev);
+	if (mfi->battery)
+		power_supply_unregister(mfi->battery);
+	dev_set_drvdata(&udev->dev, NULL);
+	usb_put_dev(mfi->udev);
+	kfree(mfi);
+}
+
+static struct usb_device_driver mfi_fc_driver = {
+	.name =		"apple-mfi-fastcharge",
+	.probe =	mfi_fc_probe,
+	.disconnect =	mfi_fc_disconnect,
+	.id_table =	mfi_fc_id_table,
+	.match =	mfi_fc_match,
+	.generic_subclass = 1,
+};
+
+static int __init mfi_fc_driver_init(void)
+{
+	return usb_register_device_driver(&mfi_fc_driver, THIS_MODULE);
+}
+
+static void __exit mfi_fc_driver_exit(void)
+{
+	usb_deregister_device_driver(&mfi_fc_driver);
+}
+
+module_init(mfi_fc_driver_init);
+module_exit(mfi_fc_driver_exit);
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
new file mode 100644
index 000000000..c8098e9b4
--- /dev/null
+++ b/drivers/usb/misc/appledisplay.c
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Apple Cinema Display driver
+ *
+ * Copyright (C) 2006  Michael Hanselmann (linux-kernel@hansmi.ch)
+ *
+ * Thanks to Caskey L. Dickson for his work with acdctl.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/backlight.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/atomic.h>
+
+#define APPLE_VENDOR_ID		0x05AC
+
+#define USB_REQ_GET_REPORT	0x01
+#define USB_REQ_SET_REPORT	0x09
+
+#define ACD_USB_TIMEOUT		250
+
+#define ACD_USB_EDID		0x0302
+#define ACD_USB_BRIGHTNESS	0x0310
+
+#define ACD_BTN_NONE		0
+#define ACD_BTN_BRIGHT_UP	3
+#define ACD_BTN_BRIGHT_DOWN	4
+
+#define ACD_URB_BUFFER_LEN	2
+#define ACD_MSG_BUFFER_LEN	2
+
+#define APPLEDISPLAY_DEVICE(prod)				\
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |		\
+		       USB_DEVICE_ID_MATCH_INT_CLASS |		\
+		       USB_DEVICE_ID_MATCH_INT_PROTOCOL,	\
+	.idVendor = APPLE_VENDOR_ID,				\
+	.idProduct = (prod),					\
+	.bInterfaceClass = USB_CLASS_HID,			\
+	.bInterfaceProtocol = 0x00
+
+/* table of devices that work with this driver */
+static const struct usb_device_id appledisplay_table[] = {
+	{ APPLEDISPLAY_DEVICE(0x9218) },
+	{ APPLEDISPLAY_DEVICE(0x9219) },
+	{ APPLEDISPLAY_DEVICE(0x921c) },
+	{ APPLEDISPLAY_DEVICE(0x921d) },
+	{ APPLEDISPLAY_DEVICE(0x9222) },
+	{ APPLEDISPLAY_DEVICE(0x9226) },
+	{ APPLEDISPLAY_DEVICE(0x9236) },
+
+	/* Terminating entry */
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, appledisplay_table);
+
+/* Structure to hold all of our device specific stuff */
+struct appledisplay {
+	struct usb_device *udev;	/* usb device */
+	struct urb *urb;		/* usb request block */
+	struct backlight_device *bd;	/* backlight device */
+	u8 *urbdata;			/* interrupt URB data buffer */
+	u8 *msgdata;			/* control message data buffer */
+
+	struct delayed_work work;
+	int button_pressed;
+	struct mutex sysfslock;		/* concurrent read and write */
+};
+
+static atomic_t count_displays = ATOMIC_INIT(0);
+
+static void appledisplay_complete(struct urb *urb)
+{
+	struct appledisplay *pdata = urb->context;
+	struct device *dev = &pdata->udev->dev;
+	int status = urb->status;
+	int retval;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -EOVERFLOW:
+		dev_err(dev,
+			"OVERFLOW with data length %d, actual length is %d\n",
+			ACD_URB_BUFFER_LEN, pdata->urb->actual_length);
+		fallthrough;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* This urb is terminated, clean up */
+		dev_dbg(dev, "%s - urb shuttingdown with status: %d\n",
+			__func__, status);
+		return;
+	default:
+		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
+		goto exit;
+	}
+
+	switch(pdata->urbdata[1]) {
+	case ACD_BTN_BRIGHT_UP:
+	case ACD_BTN_BRIGHT_DOWN:
+		pdata->button_pressed = 1;
+		schedule_delayed_work(&pdata->work, 0);
+		break;
+	case ACD_BTN_NONE:
+	default:
+		pdata->button_pressed = 0;
+		break;
+	}
+
+exit:
+	retval = usb_submit_urb(pdata->urb, GFP_ATOMIC);
+	if (retval) {
+		dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
+	}
+}
+
+static int appledisplay_bl_update_status(struct backlight_device *bd)
+{
+	struct appledisplay *pdata = bl_get_data(bd);
+	int retval;
+
+	mutex_lock(&pdata->sysfslock);
+	pdata->msgdata[0] = 0x10;
+	pdata->msgdata[1] = bd->props.brightness;
+
+	retval = usb_control_msg(
+		pdata->udev,
+		usb_sndctrlpipe(pdata->udev, 0),
+		USB_REQ_SET_REPORT,
+		USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		ACD_USB_BRIGHTNESS,
+		0,
+		pdata->msgdata, 2,
+		ACD_USB_TIMEOUT);
+	mutex_unlock(&pdata->sysfslock);
+
+	if (retval < 0)
+		return retval;
+	else
+		return 0;
+}
+
+static int appledisplay_bl_get_brightness(struct backlight_device *bd)
+{
+	struct appledisplay *pdata = bl_get_data(bd);
+	int retval, brightness;
+
+	mutex_lock(&pdata->sysfslock);
+	retval = usb_control_msg(
+		pdata->udev,
+		usb_rcvctrlpipe(pdata->udev, 0),
+		USB_REQ_GET_REPORT,
+		USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		ACD_USB_BRIGHTNESS,
+		0,
+		pdata->msgdata, 2,
+		ACD_USB_TIMEOUT);
+	if (retval < 2) {
+		if (retval >= 0)
+			retval = -EMSGSIZE;
+	} else {
+		brightness = pdata->msgdata[1];
+	}
+	mutex_unlock(&pdata->sysfslock);
+
+	if (retval < 0)
+		return retval;
+	else
+		return brightness;
+}
+
+static const struct backlight_ops appledisplay_bl_data = {
+	.get_brightness	= appledisplay_bl_get_brightness,
+	.update_status	= appledisplay_bl_update_status,
+};
+
+static void appledisplay_work(struct work_struct *work)
+{
+	struct appledisplay *pdata =
+		container_of(work, struct appledisplay, work.work);
+	int retval;
+
+	retval = appledisplay_bl_get_brightness(pdata->bd);
+	if (retval >= 0)
+		pdata->bd->props.brightness = retval;
+
+	/* Poll again in about 125ms if there's still a button pressed */
+	if (pdata->button_pressed)
+		schedule_delayed_work(&pdata->work, HZ / 8);
+}
+
+static int appledisplay_probe(struct usb_interface *iface,
+	const struct usb_device_id *id)
+{
+	struct backlight_properties props;
+	struct appledisplay *pdata;
+	struct usb_device *udev = interface_to_usbdev(iface);
+	struct usb_endpoint_descriptor *endpoint;
+	int int_in_endpointAddr = 0;
+	int retval, brightness;
+	char bl_name[20];
+
+	/* set up the endpoint information */
+	/* use only the first interrupt-in endpoint */
+	retval = usb_find_int_in_endpoint(iface->cur_altsetting, &endpoint);
+	if (retval) {
+		dev_err(&iface->dev, "Could not find int-in endpoint\n");
+		return retval;
+	}
+
+	int_in_endpointAddr = endpoint->bEndpointAddress;
+
+	/* allocate memory for our device state and initialize it */
+	pdata = kzalloc(sizeof(struct appledisplay), GFP_KERNEL);
+	if (!pdata) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	pdata->udev = udev;
+
+	INIT_DELAYED_WORK(&pdata->work, appledisplay_work);
+	mutex_init(&pdata->sysfslock);
+
+	/* Allocate buffer for control messages */
+	pdata->msgdata = kmalloc(ACD_MSG_BUFFER_LEN, GFP_KERNEL);
+	if (!pdata->msgdata) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	/* Allocate interrupt URB */
+	pdata->urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!pdata->urb) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	/* Allocate buffer for interrupt data */
+	pdata->urbdata = usb_alloc_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
+		GFP_KERNEL, &pdata->urb->transfer_dma);
+	if (!pdata->urbdata) {
+		retval = -ENOMEM;
+		dev_err(&iface->dev, "Allocating URB buffer failed\n");
+		goto error;
+	}
+
+	/* Configure interrupt URB */
+	usb_fill_int_urb(pdata->urb, udev,
+		usb_rcvintpipe(udev, int_in_endpointAddr),
+		pdata->urbdata, ACD_URB_BUFFER_LEN, appledisplay_complete,
+		pdata, 1);
+	pdata->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+	if (usb_submit_urb(pdata->urb, GFP_KERNEL)) {
+		retval = -EIO;
+		dev_err(&iface->dev, "Submitting URB failed\n");
+		goto error;
+	}
+
+	/* Register backlight device */
+	snprintf(bl_name, sizeof(bl_name), "appledisplay%d",
+		atomic_inc_return(&count_displays) - 1);
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.type = BACKLIGHT_RAW;
+	props.max_brightness = 0xff;
+	pdata->bd = backlight_device_register(bl_name, NULL, pdata,
+					      &appledisplay_bl_data, &props);
+	if (IS_ERR(pdata->bd)) {
+		dev_err(&iface->dev, "Backlight registration failed\n");
+		retval = PTR_ERR(pdata->bd);
+		goto error;
+	}
+
+	/* Try to get brightness */
+	brightness = appledisplay_bl_get_brightness(pdata->bd);
+
+	if (brightness < 0) {
+		retval = brightness;
+		dev_err(&iface->dev,
+			"Error while getting initial brightness: %d\n", retval);
+		goto error;
+	}
+
+	/* Set brightness in backlight device */
+	pdata->bd->props.brightness = brightness;
+
+	/* save our data pointer in the interface device */
+	usb_set_intfdata(iface, pdata);
+
+	printk(KERN_INFO "appledisplay: Apple Cinema Display connected\n");
+
+	return 0;
+
+error:
+	if (pdata) {
+		if (pdata->urb) {
+			usb_kill_urb(pdata->urb);
+			cancel_delayed_work_sync(&pdata->work);
+			usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
+					pdata->urbdata, pdata->urb->transfer_dma);
+			usb_free_urb(pdata->urb);
+		}
+		if (!IS_ERR(pdata->bd))
+			backlight_device_unregister(pdata->bd);
+		kfree(pdata->msgdata);
+	}
+	usb_set_intfdata(iface, NULL);
+	kfree(pdata);
+	return retval;
+}
+
+static void appledisplay_disconnect(struct usb_interface *iface)
+{
+	struct appledisplay *pdata = usb_get_intfdata(iface);
+
+	if (pdata) {
+		usb_kill_urb(pdata->urb);
+		cancel_delayed_work_sync(&pdata->work);
+		backlight_device_unregister(pdata->bd);
+		usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
+			pdata->urbdata, pdata->urb->transfer_dma);
+		usb_free_urb(pdata->urb);
+		kfree(pdata->msgdata);
+		kfree(pdata);
+	}
+
+	printk(KERN_INFO "appledisplay: Apple Cinema Display disconnected\n");
+}
+
+static struct usb_driver appledisplay_driver = {
+	.name		= "appledisplay",
+	.probe		= appledisplay_probe,
+	.disconnect	= appledisplay_disconnect,
+	.id_table	= appledisplay_table,
+};
+module_usb_driver(appledisplay_driver);
+
+MODULE_AUTHOR("Michael Hanselmann");
+MODULE_DESCRIPTION("Apple Cinema Display driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/brcmstb-usb-pinmap.c b/drivers/usb/misc/brcmstb-usb-pinmap.c
new file mode 100644
index 000000000..2b2019c19
--- /dev/null
+++ b/drivers/usb/misc/brcmstb-usb-pinmap.c
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2020, Broadcom */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/kernel.h>
+#include <linux/kdebug.h>
+#include <linux/gpio/consumer.h>
+
+struct out_pin {
+	u32 enable_mask;
+	u32 value_mask;
+	u32 changed_mask;
+	u32 clr_changed_mask;
+	struct gpio_desc *gpiod;
+	const char *name;
+};
+
+struct in_pin {
+	u32 enable_mask;
+	u32 value_mask;
+	struct gpio_desc *gpiod;
+	const char *name;
+	struct brcmstb_usb_pinmap_data *pdata;
+};
+
+struct brcmstb_usb_pinmap_data {
+	void __iomem *regs;
+	int in_count;
+	struct in_pin *in_pins;
+	int out_count;
+	struct out_pin *out_pins;
+};
+
+
+static void pinmap_set(void __iomem *reg, u32 mask)
+{
+	u32 val;
+
+	val = readl(reg);
+	val |= mask;
+	writel(val, reg);
+}
+
+static void pinmap_unset(void __iomem *reg, u32 mask)
+{
+	u32 val;
+
+	val = readl(reg);
+	val &= ~mask;
+	writel(val, reg);
+}
+
+static void sync_in_pin(struct in_pin *pin)
+{
+	u32 val;
+
+	val = gpiod_get_value(pin->gpiod);
+	if (val)
+		pinmap_set(pin->pdata->regs, pin->value_mask);
+	else
+		pinmap_unset(pin->pdata->regs, pin->value_mask);
+}
+
+/*
+ * Interrupt from override register, propagate from override bit
+ * to GPIO.
+ */
+static irqreturn_t brcmstb_usb_pinmap_ovr_isr(int irq, void *dev_id)
+{
+	struct brcmstb_usb_pinmap_data *pdata = dev_id;
+	struct out_pin *pout;
+	u32 val;
+	u32 bit;
+	int x;
+
+	pr_debug("%s: reg: 0x%x\n", __func__, readl(pdata->regs));
+	pout = pdata->out_pins;
+	for (x = 0; x < pdata->out_count; x++) {
+		val = readl(pdata->regs);
+		if (val & pout->changed_mask) {
+			pinmap_set(pdata->regs, pout->clr_changed_mask);
+			pinmap_unset(pdata->regs, pout->clr_changed_mask);
+			bit = val & pout->value_mask;
+			gpiod_set_value(pout->gpiod, bit ? 1 : 0);
+			pr_debug("%s: %s bit changed state to %d\n",
+				 __func__, pout->name, bit ? 1 : 0);
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+/*
+ * Interrupt from GPIO, propagate from GPIO to override bit.
+ */
+static irqreturn_t brcmstb_usb_pinmap_gpio_isr(int irq, void *dev_id)
+{
+	struct in_pin *pin = dev_id;
+
+	pr_debug("%s: %s pin changed state\n", __func__, pin->name);
+	sync_in_pin(pin);
+	return IRQ_HANDLED;
+}
+
+
+static void get_pin_counts(struct device_node *dn, int *in_count,
+			   int *out_count)
+{
+	int in;
+	int out;
+
+	*in_count = 0;
+	*out_count = 0;
+	in = of_property_count_strings(dn, "brcm,in-functions");
+	if (in < 0)
+		return;
+	out = of_property_count_strings(dn, "brcm,out-functions");
+	if (out < 0)
+		return;
+	*in_count = in;
+	*out_count = out;
+}
+
+static int parse_pins(struct device *dev, struct device_node *dn,
+		      struct brcmstb_usb_pinmap_data *pdata)
+{
+	struct out_pin *pout;
+	struct in_pin *pin;
+	int index;
+	int res;
+	int x;
+
+	pin = pdata->in_pins;
+	for (x = 0, index = 0; x < pdata->in_count; x++) {
+		pin->gpiod = devm_gpiod_get_index(dev, "in", x, GPIOD_IN);
+		if (IS_ERR(pin->gpiod)) {
+			dev_err(dev, "Error getting gpio %s\n", pin->name);
+			return PTR_ERR(pin->gpiod);
+
+		}
+		res = of_property_read_string_index(dn, "brcm,in-functions", x,
+						    &pin->name);
+		if (res < 0) {
+			dev_err(dev, "Error getting brcm,in-functions for %s\n",
+				pin->name);
+			return res;
+		}
+		res = of_property_read_u32_index(dn, "brcm,in-masks", index++,
+						 &pin->enable_mask);
+		if (res < 0) {
+			dev_err(dev, "Error getting 1st brcm,in-masks for %s\n",
+				pin->name);
+			return res;
+		}
+		res = of_property_read_u32_index(dn, "brcm,in-masks", index++,
+						 &pin->value_mask);
+		if (res < 0) {
+			dev_err(dev, "Error getting 2nd brcm,in-masks for %s\n",
+				pin->name);
+			return res;
+		}
+		pin->pdata = pdata;
+		pin++;
+	}
+	pout = pdata->out_pins;
+	for (x = 0, index = 0; x < pdata->out_count; x++) {
+		pout->gpiod = devm_gpiod_get_index(dev, "out", x,
+						   GPIOD_OUT_HIGH);
+		if (IS_ERR(pout->gpiod)) {
+			dev_err(dev, "Error getting gpio %s\n", pin->name);
+			return PTR_ERR(pout->gpiod);
+		}
+		res = of_property_read_string_index(dn, "brcm,out-functions", x,
+						    &pout->name);
+		if (res < 0) {
+			dev_err(dev, "Error getting brcm,out-functions for %s\n",
+				pout->name);
+			return res;
+		}
+		res = of_property_read_u32_index(dn, "brcm,out-masks", index++,
+						 &pout->enable_mask);
+		if (res < 0) {
+			dev_err(dev, "Error getting 1st brcm,out-masks for %s\n",
+				pout->name);
+			return res;
+		}
+		res = of_property_read_u32_index(dn, "brcm,out-masks", index++,
+						 &pout->value_mask);
+		if (res < 0) {
+			dev_err(dev, "Error getting 2nd brcm,out-masks for %s\n",
+				pout->name);
+			return res;
+		}
+		res = of_property_read_u32_index(dn, "brcm,out-masks", index++,
+						 &pout->changed_mask);
+		if (res < 0) {
+			dev_err(dev, "Error getting 3rd brcm,out-masks for %s\n",
+				pout->name);
+			return res;
+		}
+		res = of_property_read_u32_index(dn, "brcm,out-masks", index++,
+						 &pout->clr_changed_mask);
+		if (res < 0) {
+			dev_err(dev, "Error getting 4th out-masks for %s\n",
+				pout->name);
+			return res;
+		}
+		pout++;
+	}
+	return 0;
+}
+
+static void sync_all_pins(struct brcmstb_usb_pinmap_data *pdata)
+{
+	struct out_pin *pout;
+	struct in_pin *pin;
+	int val;
+	int x;
+
+	/*
+	 * Enable the override, clear any changed condition and
+	 * propagate the state to the GPIO for all out pins.
+	 */
+	pout = pdata->out_pins;
+	for (x = 0; x < pdata->out_count; x++) {
+		pinmap_set(pdata->regs, pout->enable_mask);
+		pinmap_set(pdata->regs, pout->clr_changed_mask);
+		pinmap_unset(pdata->regs, pout->clr_changed_mask);
+		val = readl(pdata->regs) & pout->value_mask;
+		gpiod_set_value(pout->gpiod, val ? 1 : 0);
+		pout++;
+	}
+
+	/* sync and enable all in pins. */
+	pin = pdata->in_pins;
+	for (x = 0; x < pdata->in_count; x++) {
+		sync_in_pin(pin);
+		pinmap_set(pdata->regs, pin->enable_mask);
+		pin++;
+	}
+}
+
+static int __init brcmstb_usb_pinmap_probe(struct platform_device *pdev)
+{
+	struct device_node *dn = pdev->dev.of_node;
+	struct brcmstb_usb_pinmap_data *pdata;
+	struct in_pin *pin;
+	struct resource *r;
+	int out_count;
+	int in_count;
+	int err;
+	int irq;
+	int x;
+
+	get_pin_counts(dn, &in_count, &out_count);
+	if ((in_count + out_count) == 0)
+		return -EINVAL;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r)
+		return -EINVAL;
+
+	pdata = devm_kzalloc(&pdev->dev,
+			     sizeof(*pdata) +
+			     (sizeof(struct in_pin) * in_count) +
+			     (sizeof(struct out_pin) * out_count), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->in_count = in_count;
+	pdata->out_count = out_count;
+	pdata->in_pins = (struct in_pin *)(pdata + 1);
+	pdata->out_pins = (struct out_pin *)(pdata->in_pins + in_count);
+
+	pdata->regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (!pdata->regs)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, pdata);
+
+	err = parse_pins(&pdev->dev, dn, pdata);
+	if (err)
+		return err;
+
+	sync_all_pins(pdata);
+
+	if (out_count) {
+
+		/* Enable interrupt for out pins */
+		irq = platform_get_irq(pdev, 0);
+		if (irq < 0)
+			return irq;
+		err = devm_request_irq(&pdev->dev, irq,
+				       brcmstb_usb_pinmap_ovr_isr,
+				       IRQF_TRIGGER_RISING,
+				       pdev->name, pdata);
+		if (err < 0) {
+			dev_err(&pdev->dev, "Error requesting IRQ\n");
+			return err;
+		}
+	}
+
+	for (x = 0, pin = pdata->in_pins; x < pdata->in_count; x++, pin++) {
+		irq = gpiod_to_irq(pin->gpiod);
+		if (irq < 0) {
+			dev_err(&pdev->dev, "Error getting IRQ for %s pin\n",
+				pin->name);
+			return irq;
+		}
+		err = devm_request_irq(&pdev->dev, irq,
+				       brcmstb_usb_pinmap_gpio_isr,
+				       IRQF_SHARED | IRQF_TRIGGER_RISING |
+				       IRQF_TRIGGER_FALLING,
+				       pdev->name, pin);
+		if (err < 0) {
+			dev_err(&pdev->dev, "Error requesting IRQ for %s pin\n",
+				pin->name);
+			return err;
+		}
+	}
+
+	dev_dbg(&pdev->dev, "Driver probe succeeded\n");
+	dev_dbg(&pdev->dev, "In pin count: %d, out pin count: %d\n",
+		pdata->in_count, pdata->out_count);
+	return 0;
+}
+
+
+static const struct of_device_id brcmstb_usb_pinmap_of_match[] = {
+	{ .compatible = "brcm,usb-pinmap" },
+	{ },
+};
+
+static struct platform_driver brcmstb_usb_pinmap_driver = {
+	.driver = {
+		.name	= "brcm-usb-pinmap",
+		.of_match_table = brcmstb_usb_pinmap_of_match,
+	},
+};
+
+static int __init brcmstb_usb_pinmap_init(void)
+{
+	return platform_driver_probe(&brcmstb_usb_pinmap_driver,
+				     brcmstb_usb_pinmap_probe);
+}
+
+module_init(brcmstb_usb_pinmap_init);
+MODULE_AUTHOR("Al Cooper <alcooperx@gmail.com>");
+MODULE_DESCRIPTION("Broadcom USB Pinmap Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c
new file mode 100644
index 000000000..87067c3d6
--- /dev/null
+++ b/drivers/usb/misc/chaoskey.c
@@ -0,0 +1,584 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * chaoskey - driver for ChaosKey device from Altus Metrum.
+ *
+ * This device provides true random numbers using a noise source based
+ * on a reverse-biased p-n junction in avalanche breakdown. More
+ * details can be found at http://chaoskey.org
+ *
+ * The driver connects to the kernel hardware RNG interface to provide
+ * entropy for /dev/random and other kernel activities. It also offers
+ * a separate /dev/ entry to allow for direct access to the random
+ * bit stream.
+ *
+ * Copyright © 2015 Keith Packard <keithp@keithp.com>
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/wait.h>
+#include <linux/hw_random.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+
+static struct usb_driver chaoskey_driver;
+static struct usb_class_driver chaoskey_class;
+static int chaoskey_rng_read(struct hwrng *rng, void *data,
+			     size_t max, bool wait);
+
+#define usb_dbg(usb_if, format, arg...) \
+	dev_dbg(&(usb_if)->dev, format, ## arg)
+
+#define usb_err(usb_if, format, arg...) \
+	dev_err(&(usb_if)->dev, format, ## arg)
+
+/* Version Information */
+#define DRIVER_AUTHOR	"Keith Packard, keithp@keithp.com"
+#define DRIVER_DESC	"Altus Metrum ChaosKey driver"
+#define DRIVER_SHORT	"chaoskey"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+#define CHAOSKEY_VENDOR_ID	0x1d50	/* OpenMoko */
+#define CHAOSKEY_PRODUCT_ID	0x60c6	/* ChaosKey */
+
+#define ALEA_VENDOR_ID		0x12d8	/* Araneus */
+#define ALEA_PRODUCT_ID		0x0001	/* Alea I */
+
+#define CHAOSKEY_BUF_LEN	64	/* max size of USB full speed packet */
+
+#define NAK_TIMEOUT (HZ)		/* normal stall/wait timeout */
+#define ALEA_FIRST_TIMEOUT (HZ*3)	/* first stall/wait timeout for Alea */
+
+#ifdef CONFIG_USB_DYNAMIC_MINORS
+#define USB_CHAOSKEY_MINOR_BASE 0
+#else
+
+/* IOWARRIOR_MINOR_BASE + 16, not official yet */
+#define USB_CHAOSKEY_MINOR_BASE 224
+#endif
+
+static const struct usb_device_id chaoskey_table[] = {
+	{ USB_DEVICE(CHAOSKEY_VENDOR_ID, CHAOSKEY_PRODUCT_ID) },
+	{ USB_DEVICE(ALEA_VENDOR_ID, ALEA_PRODUCT_ID) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, chaoskey_table);
+
+static void chaos_read_callback(struct urb *urb);
+
+/* Driver-local specific stuff */
+struct chaoskey {
+	struct usb_interface *interface;
+	char in_ep;
+	struct mutex lock;
+	struct mutex rng_lock;
+	int open;			/* open count */
+	bool present;			/* device not disconnected */
+	bool reading;			/* ongoing IO */
+	bool reads_started;		/* track first read for Alea */
+	int size;			/* size of buf */
+	int valid;			/* bytes of buf read */
+	int used;			/* bytes of buf consumed */
+	char *name;			/* product + serial */
+	struct hwrng hwrng;		/* Embedded struct for hwrng */
+	int hwrng_registered;		/* registered with hwrng API */
+	wait_queue_head_t wait_q;	/* for timeouts */
+	struct urb *urb;		/* for performing IO */
+	char *buf;
+};
+
+static void chaoskey_free(struct chaoskey *dev)
+{
+	if (dev) {
+		usb_dbg(dev->interface, "free");
+		usb_free_urb(dev->urb);
+		kfree(dev->name);
+		kfree(dev->buf);
+		usb_put_intf(dev->interface);
+		kfree(dev);
+	}
+}
+
+static int chaoskey_probe(struct usb_interface *interface,
+			  const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_host_interface *altsetting = interface->cur_altsetting;
+	struct usb_endpoint_descriptor *epd;
+	int in_ep;
+	struct chaoskey *dev;
+	int result = -ENOMEM;
+	int size;
+	int res;
+
+	usb_dbg(interface, "probe %s-%s", udev->product, udev->serial);
+
+	/* Find the first bulk IN endpoint and its packet size */
+	res = usb_find_bulk_in_endpoint(altsetting, &epd);
+	if (res) {
+		usb_dbg(interface, "no IN endpoint found");
+		return res;
+	}
+
+	in_ep = usb_endpoint_num(epd);
+	size = usb_endpoint_maxp(epd);
+
+	/* Validate endpoint and size */
+	if (size <= 0) {
+		usb_dbg(interface, "invalid size (%d)", size);
+		return -ENODEV;
+	}
+
+	if (size > CHAOSKEY_BUF_LEN) {
+		usb_dbg(interface, "size reduced from %d to %d\n",
+			size, CHAOSKEY_BUF_LEN);
+		size = CHAOSKEY_BUF_LEN;
+	}
+
+	/* Looks good, allocate and initialize */
+
+	dev = kzalloc(sizeof(struct chaoskey), GFP_KERNEL);
+
+	if (dev == NULL)
+		goto out;
+
+	dev->interface = usb_get_intf(interface);
+
+	dev->buf = kmalloc(size, GFP_KERNEL);
+
+	if (dev->buf == NULL)
+		goto out;
+
+	dev->urb = usb_alloc_urb(0, GFP_KERNEL);
+
+	if (!dev->urb)
+		goto out;
+
+	usb_fill_bulk_urb(dev->urb,
+		udev,
+		usb_rcvbulkpipe(udev, in_ep),
+		dev->buf,
+		size,
+		chaos_read_callback,
+		dev);
+
+	/* Construct a name using the product and serial values. Each
+	 * device needs a unique name for the hwrng code
+	 */
+
+	if (udev->product && udev->serial) {
+		dev->name = kasprintf(GFP_KERNEL, "%s-%s", udev->product,
+				      udev->serial);
+		if (dev->name == NULL)
+			goto out;
+	}
+
+	dev->in_ep = in_ep;
+
+	if (le16_to_cpu(udev->descriptor.idVendor) != ALEA_VENDOR_ID)
+		dev->reads_started = true;
+
+	dev->size = size;
+	dev->present = true;
+
+	init_waitqueue_head(&dev->wait_q);
+
+	mutex_init(&dev->lock);
+	mutex_init(&dev->rng_lock);
+
+	usb_set_intfdata(interface, dev);
+
+	result = usb_register_dev(interface, &chaoskey_class);
+	if (result) {
+		usb_err(interface, "Unable to allocate minor number.");
+		goto out;
+	}
+
+	dev->hwrng.name = dev->name ? dev->name : chaoskey_driver.name;
+	dev->hwrng.read = chaoskey_rng_read;
+	dev->hwrng.quality = 1024;
+
+	dev->hwrng_registered = (hwrng_register(&dev->hwrng) == 0);
+	if (!dev->hwrng_registered)
+		usb_err(interface, "Unable to register with hwrng");
+
+	usb_enable_autosuspend(udev);
+
+	usb_dbg(interface, "chaoskey probe success, size %d", dev->size);
+	return 0;
+
+out:
+	usb_set_intfdata(interface, NULL);
+	chaoskey_free(dev);
+	return result;
+}
+
+static void chaoskey_disconnect(struct usb_interface *interface)
+{
+	struct chaoskey	*dev;
+
+	usb_dbg(interface, "disconnect");
+	dev = usb_get_intfdata(interface);
+	if (!dev) {
+		usb_dbg(interface, "disconnect failed - no dev");
+		return;
+	}
+
+	if (dev->hwrng_registered)
+		hwrng_unregister(&dev->hwrng);
+
+	usb_deregister_dev(interface, &chaoskey_class);
+
+	usb_set_intfdata(interface, NULL);
+	mutex_lock(&dev->lock);
+
+	dev->present = false;
+	usb_poison_urb(dev->urb);
+
+	if (!dev->open) {
+		mutex_unlock(&dev->lock);
+		chaoskey_free(dev);
+	} else
+		mutex_unlock(&dev->lock);
+
+	usb_dbg(interface, "disconnect done");
+}
+
+static int chaoskey_open(struct inode *inode, struct file *file)
+{
+	struct chaoskey *dev;
+	struct usb_interface *interface;
+
+	/* get the interface from minor number and driver information */
+	interface = usb_find_interface(&chaoskey_driver, iminor(inode));
+	if (!interface)
+		return -ENODEV;
+
+	usb_dbg(interface, "open");
+
+	dev = usb_get_intfdata(interface);
+	if (!dev) {
+		usb_dbg(interface, "open (dev)");
+		return -ENODEV;
+	}
+
+	file->private_data = dev;
+	mutex_lock(&dev->lock);
+	++dev->open;
+	mutex_unlock(&dev->lock);
+
+	usb_dbg(interface, "open success");
+	return 0;
+}
+
+static int chaoskey_release(struct inode *inode, struct file *file)
+{
+	struct chaoskey *dev = file->private_data;
+	struct usb_interface *interface;
+
+	if (dev == NULL)
+		return -ENODEV;
+
+	interface = dev->interface;
+
+	usb_dbg(interface, "release");
+
+	mutex_lock(&dev->lock);
+
+	usb_dbg(interface, "open count at release is %d", dev->open);
+
+	if (dev->open <= 0) {
+		usb_dbg(interface, "invalid open count (%d)", dev->open);
+		mutex_unlock(&dev->lock);
+		return -ENODEV;
+	}
+
+	--dev->open;
+
+	if (!dev->present) {
+		if (dev->open == 0) {
+			mutex_unlock(&dev->lock);
+			chaoskey_free(dev);
+		} else
+			mutex_unlock(&dev->lock);
+	} else
+		mutex_unlock(&dev->lock);
+
+	usb_dbg(interface, "release success");
+	return 0;
+}
+
+static void chaos_read_callback(struct urb *urb)
+{
+	struct chaoskey *dev = urb->context;
+	int status = urb->status;
+
+	usb_dbg(dev->interface, "callback status (%d)", status);
+
+	if (status == 0)
+		dev->valid = urb->actual_length;
+	else
+		dev->valid = 0;
+
+	dev->used = 0;
+
+	/* must be seen first before validity is announced */
+	smp_wmb();
+
+	dev->reading = false;
+	wake_up(&dev->wait_q);
+}
+
+/* Fill the buffer. Called with dev->lock held
+ */
+static int _chaoskey_fill(struct chaoskey *dev)
+{
+	DEFINE_WAIT(wait);
+	int result;
+	bool started;
+
+	usb_dbg(dev->interface, "fill");
+
+	/* Return immediately if someone called before the buffer was
+	 * empty */
+	if (dev->valid != dev->used) {
+		usb_dbg(dev->interface, "not empty yet (valid %d used %d)",
+			dev->valid, dev->used);
+		return 0;
+	}
+
+	/* Bail if the device has been removed */
+	if (!dev->present) {
+		usb_dbg(dev->interface, "device not present");
+		return -ENODEV;
+	}
+
+	/* Make sure the device is awake */
+	result = usb_autopm_get_interface(dev->interface);
+	if (result) {
+		usb_dbg(dev->interface, "wakeup failed (result %d)", result);
+		return result;
+	}
+
+	dev->reading = true;
+	result = usb_submit_urb(dev->urb, GFP_KERNEL);
+	if (result < 0) {
+		result = usb_translate_errors(result);
+		dev->reading = false;
+		goto out;
+	}
+
+	/* The first read on the Alea takes a little under 2 seconds.
+	 * Reads after the first read take only a few microseconds
+	 * though.  Presumably the entropy-generating circuit needs
+	 * time to ramp up.  So, we wait longer on the first read.
+	 */
+	started = dev->reads_started;
+	dev->reads_started = true;
+	result = wait_event_interruptible_timeout(
+		dev->wait_q,
+		!dev->reading,
+		(started ? NAK_TIMEOUT : ALEA_FIRST_TIMEOUT) );
+
+	if (result < 0) {
+		usb_kill_urb(dev->urb);
+		goto out;
+	}
+
+	if (result == 0) {
+		result = -ETIMEDOUT;
+		usb_kill_urb(dev->urb);
+	} else {
+		result = dev->valid;
+	}
+out:
+	/* Let the device go back to sleep eventually */
+	usb_autopm_put_interface(dev->interface);
+
+	usb_dbg(dev->interface, "read %d bytes", dev->valid);
+
+	return result;
+}
+
+static ssize_t chaoskey_read(struct file *file,
+			     char __user *buffer,
+			     size_t count,
+			     loff_t *ppos)
+{
+	struct chaoskey *dev;
+	ssize_t read_count = 0;
+	int this_time;
+	int result = 0;
+	unsigned long remain;
+
+	dev = file->private_data;
+
+	if (dev == NULL || !dev->present)
+		return -ENODEV;
+
+	usb_dbg(dev->interface, "read %zu", count);
+
+	while (count > 0) {
+
+		/* Grab the rng_lock briefly to ensure that the hwrng interface
+		 * gets priority over other user access
+		 */
+		result = mutex_lock_interruptible(&dev->rng_lock);
+		if (result)
+			goto bail;
+		mutex_unlock(&dev->rng_lock);
+
+		result = mutex_lock_interruptible(&dev->lock);
+		if (result)
+			goto bail;
+		if (dev->valid == dev->used) {
+			result = _chaoskey_fill(dev);
+			if (result < 0) {
+				mutex_unlock(&dev->lock);
+				goto bail;
+			}
+		}
+
+		this_time = dev->valid - dev->used;
+		if (this_time > count)
+			this_time = count;
+
+		remain = copy_to_user(buffer, dev->buf + dev->used, this_time);
+		if (remain) {
+			result = -EFAULT;
+
+			/* Consume the bytes that were copied so we don't leak
+			 * data to user space
+			 */
+			dev->used += this_time - remain;
+			mutex_unlock(&dev->lock);
+			goto bail;
+		}
+
+		count -= this_time;
+		read_count += this_time;
+		buffer += this_time;
+		dev->used += this_time;
+		mutex_unlock(&dev->lock);
+	}
+bail:
+	if (read_count) {
+		usb_dbg(dev->interface, "read %zu bytes", read_count);
+		return read_count;
+	}
+	usb_dbg(dev->interface, "empty read, result %d", result);
+	if (result == -ETIMEDOUT)
+		result = -EAGAIN;
+	return result;
+}
+
+static int chaoskey_rng_read(struct hwrng *rng, void *data,
+			     size_t max, bool wait)
+{
+	struct chaoskey *dev = container_of(rng, struct chaoskey, hwrng);
+	int this_time;
+
+	usb_dbg(dev->interface, "rng_read max %zu wait %d", max, wait);
+
+	if (!dev->present) {
+		usb_dbg(dev->interface, "device not present");
+		return 0;
+	}
+
+	/* Hold the rng_lock until we acquire the device lock so that
+	 * this operation gets priority over other user access to the
+	 * device
+	 */
+	mutex_lock(&dev->rng_lock);
+
+	mutex_lock(&dev->lock);
+
+	mutex_unlock(&dev->rng_lock);
+
+	/* Try to fill the buffer if empty. It doesn't actually matter
+	 * if _chaoskey_fill works; we'll just return zero bytes as
+	 * the buffer will still be empty
+	 */
+	if (dev->valid == dev->used)
+		(void) _chaoskey_fill(dev);
+
+	this_time = dev->valid - dev->used;
+	if (this_time > max)
+		this_time = max;
+
+	memcpy(data, dev->buf + dev->used, this_time);
+
+	dev->used += this_time;
+
+	mutex_unlock(&dev->lock);
+
+	usb_dbg(dev->interface, "rng_read this_time %d\n", this_time);
+	return this_time;
+}
+
+#ifdef CONFIG_PM
+static int chaoskey_suspend(struct usb_interface *interface,
+			    pm_message_t message)
+{
+	usb_dbg(interface, "suspend");
+	return 0;
+}
+
+static int chaoskey_resume(struct usb_interface *interface)
+{
+	struct chaoskey *dev;
+	struct usb_device *udev = interface_to_usbdev(interface);
+
+	usb_dbg(interface, "resume");
+	dev = usb_get_intfdata(interface);
+
+	/*
+	 * We may have lost power.
+	 * In that case the device that needs a long time
+	 * for the first requests needs an extended timeout
+	 * again
+	 */
+	if (le16_to_cpu(udev->descriptor.idVendor) == ALEA_VENDOR_ID)
+		dev->reads_started = false;
+
+	return 0;
+}
+#else
+#define chaoskey_suspend NULL
+#define chaoskey_resume NULL
+#endif
+
+/* file operation pointers */
+static const struct file_operations chaoskey_fops = {
+	.owner = THIS_MODULE,
+	.read = chaoskey_read,
+	.open = chaoskey_open,
+	.release = chaoskey_release,
+	.llseek = default_llseek,
+};
+
+/* class driver information */
+static struct usb_class_driver chaoskey_class = {
+	.name = "chaoskey%d",
+	.fops = &chaoskey_fops,
+	.minor_base = USB_CHAOSKEY_MINOR_BASE,
+};
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver chaoskey_driver = {
+	.name = DRIVER_SHORT,
+	.probe = chaoskey_probe,
+	.disconnect = chaoskey_disconnect,
+	.suspend = chaoskey_suspend,
+	.resume = chaoskey_resume,
+	.reset_resume = chaoskey_resume,
+	.id_table = chaoskey_table,
+	.supports_autosuspend = 1,
+};
+
+module_usb_driver(chaoskey_driver);
+
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
new file mode 100644
index 000000000..14faec51d
--- /dev/null
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+* cypress_cy7c63.c
+*
+* Copyright (c) 2006-2007 Oliver Bock (bock@tfh-berlin.de)
+*
+*	This driver is based on the Cypress USB Driver by Marcus Maul
+*	(cyport) and the 2.0 version of Greg Kroah-Hartman's
+*	USB Skeleton driver.
+*
+*	This is a generic driver for the Cypress CY7C63xxx family.
+*	For the time being it enables you to read from and write to
+*	the single I/O ports of the device.
+*
+*	Supported vendors:	AK Modul-Bus Computer GmbH
+*				(Firmware "Port-Chip")
+*
+*	Supported devices:	CY7C63001A-PC
+*				CY7C63001C-PXC
+*				CY7C63001C-SXC
+*
+*	Supported functions:	Read/Write Ports
+*
+*
+*	For up-to-date information please visit:
+*	http://www.obock.de/kernel/cypress
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#define DRIVER_AUTHOR		"Oliver Bock (bock@tfh-berlin.de)"
+#define DRIVER_DESC		"Cypress CY7C63xxx USB driver"
+
+#define CYPRESS_VENDOR_ID	0xa2c
+#define CYPRESS_PRODUCT_ID	0x8
+
+#define CYPRESS_READ_PORT	0x4
+#define CYPRESS_WRITE_PORT	0x5
+
+#define CYPRESS_READ_RAM	0x2
+#define CYPRESS_WRITE_RAM	0x3
+#define CYPRESS_READ_ROM	0x1
+
+#define CYPRESS_READ_PORT_ID0	0
+#define CYPRESS_WRITE_PORT_ID0	0
+#define CYPRESS_READ_PORT_ID1	0x2
+#define CYPRESS_WRITE_PORT_ID1	1
+
+#define CYPRESS_MAX_REQSIZE	8
+
+
+/* table of devices that work with this driver */
+static const struct usb_device_id cypress_table[] = {
+	{ USB_DEVICE(CYPRESS_VENDOR_ID, CYPRESS_PRODUCT_ID) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, cypress_table);
+
+/* structure to hold all of our device specific stuff */
+struct cypress {
+	struct usb_device *	udev;
+	unsigned char		port[2];
+};
+
+/* used to send usb control messages to device */
+static int vendor_command(struct cypress *dev, unsigned char request,
+			  unsigned char address, unsigned char data)
+{
+	int retval = 0;
+	unsigned int pipe;
+	unsigned char *iobuf;
+
+	/* allocate some memory for the i/o buffer*/
+	iobuf = kzalloc(CYPRESS_MAX_REQSIZE, GFP_KERNEL);
+	if (!iobuf) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data);
+
+	/* prepare usb control message and send it upstream */
+	pipe = usb_rcvctrlpipe(dev->udev, 0);
+	retval = usb_control_msg(dev->udev, pipe, request,
+				 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+				 address, data, iobuf, CYPRESS_MAX_REQSIZE,
+				 USB_CTRL_GET_TIMEOUT);
+
+	/* store returned data (more READs to be added) */
+	switch (request) {
+		case CYPRESS_READ_PORT:
+			if (address == CYPRESS_READ_PORT_ID0) {
+				dev->port[0] = iobuf[1];
+				dev_dbg(&dev->udev->dev,
+					"READ_PORT0 returned: %d\n",
+					dev->port[0]);
+			}
+			else if (address == CYPRESS_READ_PORT_ID1) {
+				dev->port[1] = iobuf[1];
+				dev_dbg(&dev->udev->dev,
+					"READ_PORT1 returned: %d\n",
+					dev->port[1]);
+			}
+			break;
+	}
+
+	kfree(iobuf);
+error:
+	return retval;
+}
+
+/* write port value */
+static ssize_t write_port(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count,
+			  int port_num, int write_id)
+{
+	int value = -1;
+	int result = 0;
+
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct cypress *cyp = usb_get_intfdata(intf);
+
+	dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", port_num);
+
+	/* validate input data */
+	if (sscanf(buf, "%d", &value) < 1) {
+		result = -EINVAL;
+		goto error;
+	}
+	if (value < 0 || value > 255) {
+		result = -EINVAL;
+		goto error;
+	}
+
+	result = vendor_command(cyp, CYPRESS_WRITE_PORT, write_id,
+				(unsigned char)value);
+
+	dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
+error:
+	return result < 0 ? result : count;
+}
+
+/* attribute callback handler (write) */
+static ssize_t port0_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	return write_port(dev, attr, buf, count, 0, CYPRESS_WRITE_PORT_ID0);
+}
+
+/* attribute callback handler (write) */
+static ssize_t port1_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	return write_port(dev, attr, buf, count, 1, CYPRESS_WRITE_PORT_ID1);
+}
+
+/* read port value */
+static ssize_t read_port(struct device *dev, struct device_attribute *attr,
+			 char *buf, int port_num, int read_id)
+{
+	int result = 0;
+
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct cypress *cyp = usb_get_intfdata(intf);
+
+	dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", port_num);
+
+	result = vendor_command(cyp, CYPRESS_READ_PORT, read_id, 0);
+
+	dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
+
+	return sprintf(buf, "%d", cyp->port[port_num]);
+}
+
+/* attribute callback handler (read) */
+static ssize_t port0_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	return read_port(dev, attr, buf, 0, CYPRESS_READ_PORT_ID0);
+}
+static DEVICE_ATTR_RW(port0);
+
+/* attribute callback handler (read) */
+static ssize_t port1_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
+}
+static DEVICE_ATTR_RW(port1);
+
+static struct attribute *cypress_attrs[] = {
+	&dev_attr_port0.attr,
+	&dev_attr_port1.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(cypress);
+
+static int cypress_probe(struct usb_interface *interface,
+			 const struct usb_device_id *id)
+{
+	struct cypress *dev = NULL;
+	int retval = -ENOMEM;
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		goto error_mem;
+
+	dev->udev = usb_get_dev(interface_to_usbdev(interface));
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, dev);
+
+	/* let the user know that the device is now attached */
+	dev_info(&interface->dev,
+		 "Cypress CY7C63xxx device now attached\n");
+	return 0;
+
+error_mem:
+	return retval;
+}
+
+static void cypress_disconnect(struct usb_interface *interface)
+{
+	struct cypress *dev;
+
+	dev = usb_get_intfdata(interface);
+
+	/* the intfdata can be set to NULL only after the
+	 * device files have been removed */
+	usb_set_intfdata(interface, NULL);
+
+	usb_put_dev(dev->udev);
+
+	dev_info(&interface->dev,
+		 "Cypress CY7C63xxx device now disconnected\n");
+
+	kfree(dev);
+}
+
+static struct usb_driver cypress_driver = {
+	.name = "cypress_cy7c63",
+	.probe = cypress_probe,
+	.disconnect = cypress_disconnect,
+	.id_table = cypress_table,
+	.dev_groups = cypress_groups,
+};
+
+module_usb_driver(cypress_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c
new file mode 100644
index 000000000..3e3802aae
--- /dev/null
+++ b/drivers/usb/misc/cytherm.c
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: GPL-2.0
+/* -*- linux-c -*-
+ * Cypress USB Thermometer driver 
+ * 
+ * Copyright (c) 2004 Erik Rigtorp <erkki@linux.nu> <erik@rigtorp.com>
+ * 
+ * This driver works with Elektor magazine USB Interface as published in 
+ * issue #291. It should also work with the original starter kit/demo board
+ * from Cypress.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#define DRIVER_AUTHOR "Erik Rigtorp"
+#define DRIVER_DESC "Cypress USB Thermometer driver"
+
+#define USB_SKEL_VENDOR_ID	0x04b4
+#define USB_SKEL_PRODUCT_ID	0x0002
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) },
+	{ }
+};
+MODULE_DEVICE_TABLE (usb, id_table);
+
+/* Structure to hold all of our device specific stuff */
+struct usb_cytherm {
+	struct usb_device    *udev;	 /* save off the usb device pointer */
+	struct usb_interface *interface; /* the interface for this device */
+	int brightness;
+};
+
+
+/* Vendor requests */
+/* They all operate on one byte at a time */
+#define PING       0x00
+#define READ_ROM   0x01 /* Reads form ROM, value = address */
+#define READ_RAM   0x02 /* Reads form RAM, value = address */
+#define WRITE_RAM  0x03 /* Write to RAM, value = address, index = data */
+#define READ_PORT  0x04 /* Reads from port, value = address */
+#define WRITE_PORT 0x05 /* Write to port, value = address, index = data */ 
+
+
+/* Send a vendor command to device */
+static int vendor_command(struct usb_device *dev, unsigned char request, 
+			  unsigned char value, unsigned char index,
+			  void *buf, int size)
+{
+	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			       request, 
+			       USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+			       value, 
+			       index, buf, size,
+			       USB_CTRL_GET_TIMEOUT);
+}
+
+
+
+#define BRIGHTNESS 0x2c     /* RAM location for brightness value */
+#define BRIGHTNESS_SEM 0x2b /* RAM location for brightness semaphore */
+
+static ssize_t brightness_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(dev);    
+	struct usb_cytherm *cytherm = usb_get_intfdata(intf);     
+
+	return sprintf(buf, "%i", cytherm->brightness);
+}
+
+static ssize_t brightness_store(struct device *dev, struct device_attribute *attr, const char *buf,
+			      size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_cytherm *cytherm = usb_get_intfdata(intf);
+
+	unsigned char *buffer;
+	int retval;
+   
+	buffer = kmalloc(8, GFP_KERNEL);
+	if (!buffer)
+		return 0;
+
+	cytherm->brightness = simple_strtoul(buf, NULL, 10);
+   
+	if (cytherm->brightness > 0xFF)
+		cytherm->brightness = 0xFF;
+	else if (cytherm->brightness < 0)
+		cytherm->brightness = 0;
+   
+	/* Set brightness */
+	retval = vendor_command(cytherm->udev, WRITE_RAM, BRIGHTNESS, 
+				cytherm->brightness, buffer, 8);
+	if (retval)
+		dev_dbg(&cytherm->udev->dev, "retval = %d\n", retval);
+	/* Inform µC that we have changed the brightness setting */
+	retval = vendor_command(cytherm->udev, WRITE_RAM, BRIGHTNESS_SEM,
+				0x01, buffer, 8);
+	if (retval)
+		dev_dbg(&cytherm->udev->dev, "retval = %d\n", retval);
+   
+	kfree(buffer);
+   
+	return count;
+}
+static DEVICE_ATTR_RW(brightness);
+
+
+#define TEMP 0x33 /* RAM location for temperature */
+#define SIGN 0x34 /* RAM location for temperature sign */
+
+static ssize_t temp_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_cytherm *cytherm = usb_get_intfdata(intf);
+
+	int retval;
+	unsigned char *buffer;
+
+	int temp, sign;
+   
+	buffer = kmalloc(8, GFP_KERNEL);
+	if (!buffer)
+		return 0;
+
+	/* read temperature */
+	retval = vendor_command(cytherm->udev, READ_RAM, TEMP, 0, buffer, 8);
+	if (retval)
+		dev_dbg(&cytherm->udev->dev, "retval = %d\n", retval);
+	temp = buffer[1];
+   
+	/* read sign */
+	retval = vendor_command(cytherm->udev, READ_RAM, SIGN, 0, buffer, 8);
+	if (retval)
+		dev_dbg(&cytherm->udev->dev, "retval = %d\n", retval);
+	sign = buffer[1];
+
+	kfree(buffer);
+   
+	return sprintf(buf, "%c%i.%i", sign ? '-' : '+', temp >> 1,
+		       5*(temp - ((temp >> 1) << 1)));
+}
+static DEVICE_ATTR_RO(temp);
+
+
+#define BUTTON 0x7a
+
+static ssize_t button_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_cytherm *cytherm = usb_get_intfdata(intf);
+
+	int retval;
+	unsigned char *buffer;
+
+	buffer = kmalloc(8, GFP_KERNEL);
+	if (!buffer)
+		return 0;
+
+	/* check button */
+	retval = vendor_command(cytherm->udev, READ_RAM, BUTTON, 0, buffer, 8);
+	if (retval)
+		dev_dbg(&cytherm->udev->dev, "retval = %d\n", retval);
+   
+	retval = buffer[1];
+
+	kfree(buffer);
+
+	if (retval)
+		return sprintf(buf, "1");
+	else
+		return sprintf(buf, "0");
+}
+static DEVICE_ATTR_RO(button);
+
+
+static ssize_t port0_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_cytherm *cytherm = usb_get_intfdata(intf);
+
+	int retval;
+	unsigned char *buffer;
+
+	buffer = kmalloc(8, GFP_KERNEL);
+	if (!buffer)
+		return 0;
+
+	retval = vendor_command(cytherm->udev, READ_PORT, 0, 0, buffer, 8);
+	if (retval)
+		dev_dbg(&cytherm->udev->dev, "retval = %d\n", retval);
+
+	retval = buffer[1];
+
+	kfree(buffer);
+
+	return sprintf(buf, "%d", retval);
+}
+
+
+static ssize_t port0_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_cytherm *cytherm = usb_get_intfdata(intf);
+
+	unsigned char *buffer;
+	int retval;
+	int tmp;
+   
+	buffer = kmalloc(8, GFP_KERNEL);
+	if (!buffer)
+		return 0;
+
+	tmp = simple_strtoul(buf, NULL, 10);
+   
+	if (tmp > 0xFF)
+		tmp = 0xFF;
+	else if (tmp < 0)
+		tmp = 0;
+   
+	retval = vendor_command(cytherm->udev, WRITE_PORT, 0,
+				tmp, buffer, 8);
+	if (retval)
+		dev_dbg(&cytherm->udev->dev, "retval = %d\n", retval);
+
+	kfree(buffer);
+
+	return count;
+}
+static DEVICE_ATTR_RW(port0);
+
+static ssize_t port1_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_cytherm *cytherm = usb_get_intfdata(intf);
+
+	int retval;
+	unsigned char *buffer;
+
+	buffer = kmalloc(8, GFP_KERNEL);
+	if (!buffer)
+		return 0;
+
+	retval = vendor_command(cytherm->udev, READ_PORT, 1, 0, buffer, 8);
+	if (retval)
+		dev_dbg(&cytherm->udev->dev, "retval = %d\n", retval);
+   
+	retval = buffer[1];
+
+	kfree(buffer);
+
+	return sprintf(buf, "%d", retval);
+}
+
+
+static ssize_t port1_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_cytherm *cytherm = usb_get_intfdata(intf);
+
+	unsigned char *buffer;
+	int retval;
+	int tmp;
+   
+	buffer = kmalloc(8, GFP_KERNEL);
+	if (!buffer)
+		return 0;
+
+	tmp = simple_strtoul(buf, NULL, 10);
+   
+	if (tmp > 0xFF)
+		tmp = 0xFF;
+	else if (tmp < 0)
+		tmp = 0;
+   
+	retval = vendor_command(cytherm->udev, WRITE_PORT, 1,
+				tmp, buffer, 8);
+	if (retval)
+		dev_dbg(&cytherm->udev->dev, "retval = %d\n", retval);
+
+	kfree(buffer);
+
+	return count;
+}
+static DEVICE_ATTR_RW(port1);
+
+static struct attribute *cytherm_attrs[] = {
+	&dev_attr_brightness.attr,
+	&dev_attr_temp.attr,
+	&dev_attr_button.attr,
+	&dev_attr_port0.attr,
+	&dev_attr_port1.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(cytherm);
+
+static int cytherm_probe(struct usb_interface *interface, 
+			 const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_cytherm *dev = NULL;
+	int retval = -ENOMEM;
+
+	dev = kzalloc (sizeof(struct usb_cytherm), GFP_KERNEL);
+	if (!dev)
+		goto error_mem;
+
+	dev->udev = usb_get_dev(udev);
+
+	usb_set_intfdata (interface, dev);
+
+	dev->brightness = 0xFF;
+
+	dev_info (&interface->dev,
+		  "Cypress thermometer device now attached\n");
+	return 0;
+
+error_mem:
+	return retval;
+}
+
+static void cytherm_disconnect(struct usb_interface *interface)
+{
+	struct usb_cytherm *dev;
+
+	dev = usb_get_intfdata (interface);
+
+	/* first remove the files, then NULL the pointer */
+	usb_set_intfdata (interface, NULL);
+
+	usb_put_dev(dev->udev);
+
+	kfree(dev);
+
+	dev_info(&interface->dev, "Cypress thermometer now disconnected\n");
+}
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver cytherm_driver = {
+	.name =		"cytherm",
+	.probe =	cytherm_probe,
+	.disconnect =	cytherm_disconnect,
+	.id_table =	id_table,
+	.dev_groups =	cytherm_groups,
+};
+
+module_usb_driver(cytherm_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/ehset.c b/drivers/usb/misc/ehset.c
new file mode 100644
index 000000000..36b6e9fa7
--- /dev/null
+++ b/drivers/usb/misc/ehset.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2010-2013, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/ch11.h>
+
+#define TEST_SE0_NAK_PID			0x0101
+#define TEST_J_PID				0x0102
+#define TEST_K_PID				0x0103
+#define TEST_PACKET_PID				0x0104
+#define TEST_HS_HOST_PORT_SUSPEND_RESUME	0x0106
+#define TEST_SINGLE_STEP_GET_DEV_DESC		0x0107
+#define TEST_SINGLE_STEP_SET_FEATURE		0x0108
+
+extern const struct usb_device_id *usb_device_match_id(struct usb_device *udev,
+						const struct usb_device_id *id);
+
+/*
+ * A list of USB hubs which requires to disable the power
+ * to the port before starting the testing procedures.
+ */
+static const struct usb_device_id ehset_hub_list[] = {
+	{ USB_DEVICE(0x0424, 0x4502) },
+	{ USB_DEVICE(0x0424, 0x4913) },
+	{ USB_DEVICE(0x0451, 0x8027) },
+	{ }
+};
+
+static int ehset_prepare_port_for_testing(struct usb_device *hub_udev, u16 portnum)
+{
+	int ret = 0;
+
+	/*
+	 * The USB2.0 spec chapter 11.24.2.13 says that the USB port which is
+	 * going under test needs to be put in suspend before sending the
+	 * test command. Most hubs don't enforce this precondition, but there
+	 * are some hubs which needs to disable the power to the port before
+	 * starting the test.
+	 */
+	if (usb_device_match_id(hub_udev, ehset_hub_list)) {
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_CLEAR_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_ENABLE,
+					   portnum, NULL, 0, 1000, GFP_KERNEL);
+		/*
+		 * Wait for the port to be disabled. It's an arbitrary value
+		 * which worked every time.
+		 */
+		msleep(100);
+	} else {
+		/*
+		 * For the hubs which are compliant with the spec,
+		 * put the port in SUSPEND.
+		 */
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_SUSPEND,
+					   portnum, NULL, 0, 1000, GFP_KERNEL);
+	}
+	return ret;
+}
+
+static int ehset_probe(struct usb_interface *intf,
+		       const struct usb_device_id *id)
+{
+	int ret = -EINVAL;
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_device *hub_udev = dev->parent;
+	struct usb_device_descriptor buf;
+	u8 portnum = dev->portnum;
+	u16 test_pid = le16_to_cpu(dev->descriptor.idProduct);
+
+	switch (test_pid) {
+	case TEST_SE0_NAK_PID:
+		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
+		if (ret < 0)
+			break;
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_TEST,
+					   (USB_TEST_SE0_NAK << 8) | portnum,
+					   NULL, 0, 1000, GFP_KERNEL);
+		break;
+	case TEST_J_PID:
+		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
+		if (ret < 0)
+			break;
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_TEST,
+					   (USB_TEST_J << 8) | portnum, NULL, 0,
+					   1000, GFP_KERNEL);
+		break;
+	case TEST_K_PID:
+		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
+		if (ret < 0)
+			break;
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_TEST,
+					   (USB_TEST_K << 8) | portnum, NULL, 0,
+					   1000, GFP_KERNEL);
+		break;
+	case TEST_PACKET_PID:
+		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
+		if (ret < 0)
+			break;
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_TEST,
+					   (USB_TEST_PACKET << 8) | portnum,
+					   NULL, 0, 1000, GFP_KERNEL);
+		break;
+	case TEST_HS_HOST_PORT_SUSPEND_RESUME:
+		/* Test: wait for 15secs -> suspend -> 15secs delay -> resume */
+		msleep(15 * 1000);
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_SUSPEND,
+					   portnum, NULL, 0, 1000, GFP_KERNEL);
+		if (ret < 0)
+			break;
+
+		msleep(15 * 1000);
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_CLEAR_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_SUSPEND,
+					   portnum, NULL, 0, 1000, GFP_KERNEL);
+		break;
+	case TEST_SINGLE_STEP_GET_DEV_DESC:
+		/* Test: wait for 15secs -> GetDescriptor request */
+		msleep(15 * 1000);
+
+		ret = usb_control_msg_recv(dev, 0, USB_REQ_GET_DESCRIPTOR,
+					   USB_DIR_IN, USB_DT_DEVICE << 8, 0,
+					   &buf, USB_DT_DEVICE_SIZE,
+					   USB_CTRL_GET_TIMEOUT, GFP_KERNEL);
+		break;
+	case TEST_SINGLE_STEP_SET_FEATURE:
+		/*
+		 * GetDescriptor SETUP request -> 15secs delay -> IN & STATUS
+		 *
+		 * Note, this test is only supported on root hubs since the
+		 * SetPortFeature handling can only be done inside the HCD's
+		 * hub_control callback function.
+		 */
+		if (hub_udev != dev->bus->root_hub) {
+			dev_err(&intf->dev, "SINGLE_STEP_SET_FEATURE test only supported on root hub\n");
+			break;
+		}
+
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_TEST,
+					   (6 << 8) | portnum, NULL, 0,
+					   60 * 1000, GFP_KERNEL);
+
+		break;
+	default:
+		dev_err(&intf->dev, "%s: unsupported PID: 0x%x\n",
+			__func__, test_pid);
+	}
+
+	return ret;
+}
+
+static void ehset_disconnect(struct usb_interface *intf)
+{
+}
+
+static const struct usb_device_id ehset_id_table[] = {
+	{ USB_DEVICE(0x1a0a, TEST_SE0_NAK_PID) },
+	{ USB_DEVICE(0x1a0a, TEST_J_PID) },
+	{ USB_DEVICE(0x1a0a, TEST_K_PID) },
+	{ USB_DEVICE(0x1a0a, TEST_PACKET_PID) },
+	{ USB_DEVICE(0x1a0a, TEST_HS_HOST_PORT_SUSPEND_RESUME) },
+	{ USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_GET_DEV_DESC) },
+	{ USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_SET_FEATURE) },
+	{ }			/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, ehset_id_table);
+
+static struct usb_driver ehset_driver = {
+	.name =		"usb_ehset_test",
+	.probe =	ehset_probe,
+	.disconnect =	ehset_disconnect,
+	.id_table =	ehset_id_table,
+};
+
+module_usb_driver(ehset_driver);
+
+MODULE_DESCRIPTION("USB Driver for EHSET Test Fixture");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
new file mode 100644
index 000000000..24d841850
--- /dev/null
+++ b/drivers/usb/misc/emi26.c
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0
+/* 
+ * Emagic EMI 2|6 usb audio interface firmware loader.
+ * Copyright (C) 2002
+ * 	Tapio Laxström (tapio.laxstrom@iptime.fi)
+ *
+ * emi26.c,v 1.13 2002/03/08 13:10:26 tapio Exp
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/ihex.h>
+
+#define EMI26_VENDOR_ID 		0x086a  /* Emagic Soft-und Hardware GmBH */
+#define EMI26_PRODUCT_ID		0x0100	/* EMI 2|6 without firmware */
+#define EMI26B_PRODUCT_ID		0x0102	/* EMI 2|6 without firmware */
+
+#define ANCHOR_LOAD_INTERNAL	0xA0	/* Vendor specific request code for Anchor Upload/Download (This one is implemented in the core) */
+#define ANCHOR_LOAD_EXTERNAL	0xA3	/* This command is not implemented in the core. Requires firmware */
+#define ANCHOR_LOAD_FPGA	0xA5	/* This command is not implemented in the core. Requires firmware. Emagic extension */
+#define MAX_INTERNAL_ADDRESS	0x1B3F	/* This is the highest internal RAM address for the AN2131Q */
+#define CPUCS_REG		0x7F92  /* EZ-USB Control and Status Register.  Bit 0 controls 8051 reset */ 
+#define INTERNAL_RAM(address)   (address <= MAX_INTERNAL_ADDRESS)
+
+static int emi26_writememory( struct usb_device *dev, int address,
+			      const unsigned char *data, int length,
+			      __u8 bRequest);
+static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit);
+static int emi26_load_firmware (struct usb_device *dev);
+static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id);
+static void emi26_disconnect(struct usb_interface *intf);
+
+/* thanks to drivers/usb/serial/keyspan_pda.c code */
+static int emi26_writememory (struct usb_device *dev, int address,
+			      const unsigned char *data, int length,
+			      __u8 request)
+{
+	int result;
+	unsigned char *buffer =  kmemdup(data, length, GFP_KERNEL);
+
+	if (!buffer) {
+		dev_err(&dev->dev, "kmalloc(%d) failed.\n", length);
+		return -ENOMEM;
+	}
+	/* Note: usb_control_msg returns negative value on error or length of the
+	 * 		 data that was written! */
+	result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300);
+	kfree (buffer);
+	return result;
+}
+
+/* thanks to drivers/usb/serial/keyspan_pda.c code */
+static int emi26_set_reset (struct usb_device *dev, unsigned char reset_bit)
+{
+	int response;
+	dev_info(&dev->dev, "%s - %d\n", __func__, reset_bit);
+	/* printk(KERN_DEBUG "%s - %d", __func__, reset_bit); */
+	response = emi26_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0);
+	if (response < 0) {
+		dev_err(&dev->dev, "set_reset (%d) failed\n", reset_bit);
+	}
+	return response;
+}
+
+#define FW_LOAD_SIZE		1023
+
+static int emi26_load_firmware (struct usb_device *dev)
+{
+	const struct firmware *loader_fw = NULL;
+	const struct firmware *bitstream_fw = NULL;
+	const struct firmware *firmware_fw = NULL;
+	const struct ihex_binrec *rec;
+	int err = -ENOMEM;
+	int i;
+	__u32 addr;	/* Address to write */
+	__u8 *buf;
+
+	buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL);
+	if (!buf)
+		goto wraperr;
+
+	err = request_ihex_firmware(&loader_fw, "emi26/loader.fw", &dev->dev);
+	if (err)
+		goto nofw;
+
+	err = request_ihex_firmware(&bitstream_fw, "emi26/bitstream.fw",
+				    &dev->dev);
+	if (err)
+		goto nofw;
+
+	err = request_ihex_firmware(&firmware_fw, "emi26/firmware.fw",
+				    &dev->dev);
+	if (err) {
+	nofw:
+		dev_err(&dev->dev, "%s - request_firmware() failed\n",
+			__func__);
+		goto wraperr;
+	}
+
+	/* Assert reset (stop the CPU in the EMI) */
+	err = emi26_set_reset(dev,1);
+	if (err < 0)
+		goto wraperr;
+
+	rec = (const struct ihex_binrec *)loader_fw->data;
+	/* 1. We need to put the loader for the FPGA into the EZ-USB */
+	while (rec) {
+		err = emi26_writememory(dev, be32_to_cpu(rec->addr),
+					rec->data, be16_to_cpu(rec->len),
+					ANCHOR_LOAD_INTERNAL);
+		if (err < 0)
+			goto wraperr;
+		rec = ihex_next_binrec(rec);
+	}
+
+	/* De-assert reset (let the CPU run) */
+	err = emi26_set_reset(dev,0);
+	if (err < 0)
+		goto wraperr;
+	msleep(250);	/* let device settle */
+
+	/* 2. We upload the FPGA firmware into the EMI
+	 * Note: collect up to 1023 (yes!) bytes and send them with
+	 * a single request. This is _much_ faster! */
+	rec = (const struct ihex_binrec *)bitstream_fw->data;
+	do {
+		i = 0;
+		addr = be32_to_cpu(rec->addr);
+
+		/* intel hex records are terminated with type 0 element */
+		while (rec && (i + be16_to_cpu(rec->len) < FW_LOAD_SIZE)) {
+			memcpy(buf + i, rec->data, be16_to_cpu(rec->len));
+			i += be16_to_cpu(rec->len);
+			rec = ihex_next_binrec(rec);
+		}
+		err = emi26_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA);
+		if (err < 0)
+			goto wraperr;
+	} while (rec);
+
+	/* Assert reset (stop the CPU in the EMI) */
+	err = emi26_set_reset(dev,1);
+	if (err < 0)
+		goto wraperr;
+
+	/* 3. We need to put the loader for the firmware into the EZ-USB (again...) */
+	for (rec = (const struct ihex_binrec *)loader_fw->data;
+	     rec; rec = ihex_next_binrec(rec)) {
+		err = emi26_writememory(dev, be32_to_cpu(rec->addr),
+					rec->data, be16_to_cpu(rec->len),
+					ANCHOR_LOAD_INTERNAL);
+		if (err < 0)
+			goto wraperr;
+	}
+	msleep(250);	/* let device settle */
+
+	/* De-assert reset (let the CPU run) */
+	err = emi26_set_reset(dev,0);
+	if (err < 0)
+		goto wraperr;
+
+	/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
+
+	for (rec = (const struct ihex_binrec *)firmware_fw->data;
+	     rec; rec = ihex_next_binrec(rec)) {
+		if (!INTERNAL_RAM(be32_to_cpu(rec->addr))) {
+			err = emi26_writememory(dev, be32_to_cpu(rec->addr),
+						rec->data, be16_to_cpu(rec->len),
+						ANCHOR_LOAD_EXTERNAL);
+			if (err < 0)
+				goto wraperr;
+		}
+	}
+
+	/* Assert reset (stop the CPU in the EMI) */
+	err = emi26_set_reset(dev,1);
+	if (err < 0)
+		goto wraperr;
+
+	for (rec = (const struct ihex_binrec *)firmware_fw->data;
+	     rec; rec = ihex_next_binrec(rec)) {
+		if (INTERNAL_RAM(be32_to_cpu(rec->addr))) {
+			err = emi26_writememory(dev, be32_to_cpu(rec->addr),
+						rec->data, be16_to_cpu(rec->len),
+						ANCHOR_LOAD_INTERNAL);
+			if (err < 0)
+				goto wraperr;
+		}
+	}
+
+	/* De-assert reset (let the CPU run) */
+	err = emi26_set_reset(dev,0);
+	if (err < 0)
+		goto wraperr;
+	msleep(250);	/* let device settle */
+
+	/* return 1 to fail the driver inialization
+	 * and give real driver change to load */
+	err = 1;
+
+wraperr:
+	if (err < 0)
+		dev_err(&dev->dev,"%s - error loading firmware: error = %d\n",
+			__func__, err);
+
+	release_firmware(loader_fw);
+	release_firmware(bitstream_fw);
+	release_firmware(firmware_fw);
+
+	kfree(buf);
+	return err;
+}
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(EMI26_VENDOR_ID, EMI26_PRODUCT_ID) },
+	{ USB_DEVICE(EMI26_VENDOR_ID, EMI26B_PRODUCT_ID) },
+	{ }                                             /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, id_table);
+
+static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+
+	dev_info(&intf->dev, "%s start\n", __func__);
+
+	emi26_load_firmware(dev);
+
+	/* do not return the driver context, let real audio driver do that */
+	return -EIO;
+}
+
+static void emi26_disconnect(struct usb_interface *intf)
+{
+}
+
+static struct usb_driver emi26_driver = {
+	.name		= "emi26 - firmware loader",
+	.probe		= emi26_probe,
+	.disconnect	= emi26_disconnect,
+	.id_table	= id_table,
+};
+
+module_usb_driver(emi26_driver);
+
+MODULE_AUTHOR("Tapio Laxström");
+MODULE_DESCRIPTION("Emagic EMI 2|6 firmware loader.");
+MODULE_LICENSE("GPL");
+
+MODULE_FIRMWARE("emi26/loader.fw");
+MODULE_FIRMWARE("emi26/bitstream.fw");
+MODULE_FIRMWARE("emi26/firmware.fw");
+/* vi:ai:syntax=c:sw=8:ts=8:tw=80
+ */
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
new file mode 100644
index 000000000..3eea60437
--- /dev/null
+++ b/drivers/usb/misc/emi62.c
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0
+/* 
+ * Emagic EMI 2|6 usb audio interface firmware loader.
+ * Copyright (C) 2002
+ * 	Tapio Laxström (tapio.laxstrom@iptime.fi)
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/ihex.h>
+
+/* include firmware (variables)*/
+
+/* FIXME: This is quick and dirty solution! */
+#define SPDIF	/* if you want SPDIF comment next line */
+//#undef SPDIF	/* if you want MIDI uncomment this line */ 
+
+#ifdef SPDIF
+#define FIRMWARE_FW "emi62/spdif.fw"
+#else
+#define FIRMWARE_FW "emi62/midi.fw"
+#endif
+
+#define EMI62_VENDOR_ID 		0x086a  /* Emagic Soft-und Hardware GmBH */
+#define EMI62_PRODUCT_ID		0x0110	/* EMI 6|2m without firmware */
+
+#define ANCHOR_LOAD_INTERNAL	0xA0	/* Vendor specific request code for Anchor Upload/Download (This one is implemented in the core) */
+#define ANCHOR_LOAD_EXTERNAL	0xA3	/* This command is not implemented in the core. Requires firmware */
+#define ANCHOR_LOAD_FPGA	0xA5	/* This command is not implemented in the core. Requires firmware. Emagic extension */
+#define MAX_INTERNAL_ADDRESS	0x1B3F	/* This is the highest internal RAM address for the AN2131Q */
+#define CPUCS_REG		0x7F92  /* EZ-USB Control and Status Register.  Bit 0 controls 8051 reset */ 
+#define INTERNAL_RAM(address)   (address <= MAX_INTERNAL_ADDRESS)
+
+static int emi62_writememory(struct usb_device *dev, int address,
+			     const unsigned char *data, int length,
+			     __u8 bRequest);
+static int emi62_set_reset(struct usb_device *dev, unsigned char reset_bit);
+static int emi62_load_firmware (struct usb_device *dev);
+static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id);
+static void emi62_disconnect(struct usb_interface *intf);
+
+/* thanks to drivers/usb/serial/keyspan_pda.c code */
+static int emi62_writememory(struct usb_device *dev, int address,
+			     const unsigned char *data, int length,
+			     __u8 request)
+{
+	int result;
+	unsigned char *buffer =  kmemdup(data, length, GFP_KERNEL);
+
+	if (!buffer) {
+		dev_err(&dev->dev, "kmalloc(%d) failed.\n", length);
+		return -ENOMEM;
+	}
+	/* Note: usb_control_msg returns negative value on error or length of the
+	 * 		 data that was written! */
+	result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300);
+	kfree (buffer);
+	return result;
+}
+
+/* thanks to drivers/usb/serial/keyspan_pda.c code */
+static int emi62_set_reset (struct usb_device *dev, unsigned char reset_bit)
+{
+	int response;
+	dev_info(&dev->dev, "%s - %d\n", __func__, reset_bit);
+	
+	response = emi62_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0);
+	if (response < 0)
+		dev_err(&dev->dev, "set_reset (%d) failed\n", reset_bit);
+	return response;
+}
+
+#define FW_LOAD_SIZE		1023
+
+static int emi62_load_firmware (struct usb_device *dev)
+{
+	const struct firmware *loader_fw = NULL;
+	const struct firmware *bitstream_fw = NULL;
+	const struct firmware *firmware_fw = NULL;
+	const struct ihex_binrec *rec;
+	int err = -ENOMEM;
+	int i;
+	__u32 addr;	/* Address to write */
+	__u8 *buf;
+
+	dev_dbg(&dev->dev, "load_firmware\n");
+	buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL);
+	if (!buf)
+		goto wraperr;
+
+	err = request_ihex_firmware(&loader_fw, "emi62/loader.fw", &dev->dev);
+	if (err)
+		goto nofw;
+
+	err = request_ihex_firmware(&bitstream_fw, "emi62/bitstream.fw",
+				    &dev->dev);
+	if (err)
+		goto nofw;
+
+	err = request_ihex_firmware(&firmware_fw, FIRMWARE_FW, &dev->dev);
+	if (err) {
+	nofw:
+		goto wraperr;
+	}
+
+	/* Assert reset (stop the CPU in the EMI) */
+	err = emi62_set_reset(dev,1);
+	if (err < 0)
+		goto wraperr;
+
+	rec = (const struct ihex_binrec *)loader_fw->data;
+
+	/* 1. We need to put the loader for the FPGA into the EZ-USB */
+	while (rec) {
+		err = emi62_writememory(dev, be32_to_cpu(rec->addr),
+					rec->data, be16_to_cpu(rec->len),
+					ANCHOR_LOAD_INTERNAL);
+		if (err < 0)
+			goto wraperr;
+		rec = ihex_next_binrec(rec);
+	}
+
+	/* De-assert reset (let the CPU run) */
+	err = emi62_set_reset(dev,0);
+	if (err < 0)
+		goto wraperr;
+	msleep(250);	/* let device settle */
+
+	/* 2. We upload the FPGA firmware into the EMI
+	 * Note: collect up to 1023 (yes!) bytes and send them with
+	 * a single request. This is _much_ faster! */
+	rec = (const struct ihex_binrec *)bitstream_fw->data;
+	do {
+		i = 0;
+		addr = be32_to_cpu(rec->addr);
+
+		/* intel hex records are terminated with type 0 element */
+		while (rec && (i + be16_to_cpu(rec->len) < FW_LOAD_SIZE)) {
+			memcpy(buf + i, rec->data, be16_to_cpu(rec->len));
+			i += be16_to_cpu(rec->len);
+			rec = ihex_next_binrec(rec);
+		}
+		err = emi62_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA);
+		if (err < 0)
+			goto wraperr;
+	} while (rec);
+
+	/* Assert reset (stop the CPU in the EMI) */
+	err = emi62_set_reset(dev,1);
+	if (err < 0)
+		goto wraperr;
+
+	/* 3. We need to put the loader for the firmware into the EZ-USB (again...) */
+	for (rec = (const struct ihex_binrec *)loader_fw->data;
+	     rec; rec = ihex_next_binrec(rec)) {
+		err = emi62_writememory(dev, be32_to_cpu(rec->addr),
+					rec->data, be16_to_cpu(rec->len),
+					ANCHOR_LOAD_INTERNAL);
+		if (err < 0)
+			goto wraperr;
+	}
+
+	/* De-assert reset (let the CPU run) */
+	err = emi62_set_reset(dev,0);
+	if (err < 0)
+		goto wraperr;
+	msleep(250);	/* let device settle */
+
+	/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
+
+	for (rec = (const struct ihex_binrec *)firmware_fw->data;
+	     rec; rec = ihex_next_binrec(rec)) {
+		if (!INTERNAL_RAM(be32_to_cpu(rec->addr))) {
+			err = emi62_writememory(dev, be32_to_cpu(rec->addr),
+						rec->data, be16_to_cpu(rec->len),
+						ANCHOR_LOAD_EXTERNAL);
+			if (err < 0)
+				goto wraperr;
+		}
+	}
+
+	/* Assert reset (stop the CPU in the EMI) */
+	err = emi62_set_reset(dev,1);
+	if (err < 0)
+		goto wraperr;
+
+	for (rec = (const struct ihex_binrec *)firmware_fw->data;
+	     rec; rec = ihex_next_binrec(rec)) {
+		if (INTERNAL_RAM(be32_to_cpu(rec->addr))) {
+			err = emi62_writememory(dev, be32_to_cpu(rec->addr),
+						rec->data, be16_to_cpu(rec->len),
+						ANCHOR_LOAD_EXTERNAL);
+			if (err < 0)
+				goto wraperr;
+		}
+	}
+
+	/* De-assert reset (let the CPU run) */
+	err = emi62_set_reset(dev,0);
+	if (err < 0)
+		goto wraperr;
+	msleep(250);	/* let device settle */
+
+	release_firmware(loader_fw);
+	release_firmware(bitstream_fw);
+	release_firmware(firmware_fw);
+
+	kfree(buf);
+
+	/* return 1 to fail the driver inialization
+	 * and give real driver change to load */
+	return 1;
+
+wraperr:
+	if (err < 0)
+		dev_err(&dev->dev,"%s - error loading firmware: error = %d\n",
+			__func__, err);
+	release_firmware(loader_fw);
+	release_firmware(bitstream_fw);
+	release_firmware(firmware_fw);
+
+	kfree(buf);
+	dev_err(&dev->dev, "Error\n");
+	return err;
+}
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(EMI62_VENDOR_ID, EMI62_PRODUCT_ID) },
+	{ }                                             /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, id_table);
+
+static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	dev_dbg(&intf->dev, "emi62_probe\n");
+
+	dev_info(&intf->dev, "%s start\n", __func__);
+
+	emi62_load_firmware(dev);
+
+	/* do not return the driver context, let real audio driver do that */
+	return -EIO;
+}
+
+static void emi62_disconnect(struct usb_interface *intf)
+{
+}
+
+static struct usb_driver emi62_driver = {
+	.name		= "emi62 - firmware loader",
+	.probe		= emi62_probe,
+	.disconnect	= emi62_disconnect,
+	.id_table	= id_table,
+};
+
+module_usb_driver(emi62_driver);
+
+MODULE_AUTHOR("Tapio Laxström");
+MODULE_DESCRIPTION("Emagic EMI 6|2m firmware loader.");
+MODULE_LICENSE("GPL");
+
+MODULE_FIRMWARE("emi62/loader.fw");
+MODULE_FIRMWARE("emi62/bitstream.fw");
+MODULE_FIRMWARE(FIRMWARE_FW);
+/* vi:ai:syntax=c:sw=8:ts=8:tw=80
+ */
diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c
new file mode 100644
index 000000000..78aaee56c
--- /dev/null
+++ b/drivers/usb/misc/ezusb.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * EZ-USB specific functions used by some of the USB to Serial drivers.
+ *
+ * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/ihex.h>
+#include <linux/usb/ezusb.h>
+
+struct ezusb_fx_type {
+	/* EZ-USB Control and Status Register.  Bit 0 controls 8051 reset */
+	unsigned short cpucs_reg;
+	unsigned short max_internal_adress;
+};
+
+static const struct ezusb_fx_type ezusb_fx1 = {
+	.cpucs_reg = 0x7F92,
+	.max_internal_adress = 0x1B3F,
+};
+
+/* Commands for writing to memory */
+#define WRITE_INT_RAM 0xA0
+#define WRITE_EXT_RAM 0xA3
+
+static int ezusb_writememory(struct usb_device *dev, int address,
+				unsigned char *data, int length, __u8 request)
+{
+	if (!dev)
+		return -ENODEV;
+
+	return usb_control_msg_send(dev, 0, request,
+				 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				 address, 0, data, length, 3000, GFP_KERNEL);
+}
+
+static int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg,
+			   unsigned char reset_bit)
+{
+	int response = ezusb_writememory(dev, cpucs_reg, &reset_bit, 1, WRITE_INT_RAM);
+	if (response < 0)
+		dev_err(&dev->dev, "%s-%d failed: %d\n",
+						__func__, reset_bit, response);
+	return response;
+}
+
+int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit)
+{
+	return ezusb_set_reset(dev, ezusb_fx1.cpucs_reg, reset_bit);
+}
+EXPORT_SYMBOL_GPL(ezusb_fx1_set_reset);
+
+static int ezusb_ihex_firmware_download(struct usb_device *dev,
+					struct ezusb_fx_type fx,
+					const char *firmware_path)
+{
+	int ret = -ENOENT;
+	const struct firmware *firmware = NULL;
+	const struct ihex_binrec *record;
+
+	if (request_ihex_firmware(&firmware, firmware_path,
+				  &dev->dev)) {
+		dev_err(&dev->dev,
+			"%s - request \"%s\" failed\n",
+			__func__, firmware_path);
+		goto out;
+	}
+
+	ret = ezusb_set_reset(dev, fx.cpucs_reg, 0);
+	if (ret < 0)
+		goto out;
+
+	record = (const struct ihex_binrec *)firmware->data;
+	for (; record; record = ihex_next_binrec(record)) {
+		if (be32_to_cpu(record->addr) > fx.max_internal_adress) {
+			ret = ezusb_writememory(dev, be32_to_cpu(record->addr),
+						(unsigned char *)record->data,
+						be16_to_cpu(record->len), WRITE_EXT_RAM);
+			if (ret < 0) {
+				dev_err(&dev->dev, "%s - ezusb_writememory "
+					"failed writing internal memory "
+					"(%d %04X %p %d)\n", __func__, ret,
+					be32_to_cpu(record->addr), record->data,
+					be16_to_cpu(record->len));
+				goto out;
+			}
+		}
+	}
+
+	ret = ezusb_set_reset(dev, fx.cpucs_reg, 1);
+	if (ret < 0)
+		goto out;
+	record = (const struct ihex_binrec *)firmware->data;
+	for (; record; record = ihex_next_binrec(record)) {
+		if (be32_to_cpu(record->addr) <= fx.max_internal_adress) {
+			ret = ezusb_writememory(dev, be32_to_cpu(record->addr),
+						(unsigned char *)record->data,
+						be16_to_cpu(record->len), WRITE_INT_RAM);
+			if (ret < 0) {
+				dev_err(&dev->dev, "%s - ezusb_writememory "
+					"failed writing external memory "
+					"(%d %04X %p %d)\n", __func__, ret,
+					be32_to_cpu(record->addr), record->data,
+					be16_to_cpu(record->len));
+				goto out;
+			}
+		}
+	}
+	ret = ezusb_set_reset(dev, fx.cpucs_reg, 0);
+out:
+	release_firmware(firmware);
+	return ret;
+}
+
+int ezusb_fx1_ihex_firmware_download(struct usb_device *dev,
+				     const char *firmware_path)
+{
+	return ezusb_ihex_firmware_download(dev, ezusb_fx1, firmware_path);
+}
+EXPORT_SYMBOL_GPL(ezusb_fx1_ihex_firmware_download);
+
+#if 0
+/*
+ * Once someone one needs these fx2 functions, uncomment them
+ * and add them to ezusb.h and all should be good.
+ */
+static struct ezusb_fx_type ezusb_fx2 = {
+	.cpucs_reg = 0xE600,
+	.max_internal_adress = 0x3FFF,
+};
+
+int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit)
+{
+	return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit);
+}
+EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset);
+
+int ezusb_fx2_ihex_firmware_download(struct usb_device *dev,
+				     const char *firmware_path)
+{
+	return ezusb_ihex_firmware_download(dev, ezusb_fx2, firmware_path);
+}
+EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download);
+#endif
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
new file mode 100644
index 000000000..b2f980409
--- /dev/null
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -0,0 +1,2784 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB FTDI client driver for Elan Digital Systems's Uxxx adapters
+ *
+ * Copyright(C) 2006 Elan Digital Systems Limited
+ * http://www.elandigitalsystems.com
+ *
+ * Author and Maintainer - Tony Olech - Elan Digital Systems
+ * tony.olech@elandigitalsystems.com
+ *
+ * This driver was written by Tony Olech(tony.olech@elandigitalsystems.com)
+ * based on various USB client drivers in the 2.6.15 linux kernel
+ * with constant reference to the 3rd Edition of Linux Device Drivers
+ * published by O'Reilly
+ *
+ * The U132 adapter is a USB to CardBus adapter specifically designed
+ * for PC cards that contain an OHCI host controller. Typical PC cards
+ * are the Orange Mobile 3G Option GlobeTrotter Fusion card.
+ *
+ * The U132 adapter will *NOT *work with PC cards that do not contain
+ * an OHCI controller. A simple way to test whether a PC card has an
+ * OHCI controller as an interface is to insert the PC card directly
+ * into a laptop(or desktop) with a CardBus slot and if "lspci" shows
+ * a new USB controller and "lsusb -v" shows a new OHCI Host Controller
+ * then there is a good chance that the U132 adapter will support the
+ * PC card.(you also need the specific client driver for the PC card)
+ *
+ * Please inform the Author and Maintainer about any PC cards that
+ * contain OHCI Host Controller and work when directly connected to
+ * an embedded CardBus slot but do not work when they are connected
+ * via an ELAN U132 adapter.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/ioctl.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kref.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+MODULE_AUTHOR("Tony Olech");
+MODULE_DESCRIPTION("FTDI ELAN driver");
+MODULE_LICENSE("GPL");
+#define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444)
+static bool distrust_firmware = 1;
+module_param(distrust_firmware, bool, 0);
+MODULE_PARM_DESC(distrust_firmware,
+		 "true to distrust firmware power/overcurrent setup");
+extern struct platform_driver u132_platform_driver;
+/*
+ * ftdi_module_lock exists to protect access to global variables
+ *
+ */
+static struct mutex ftdi_module_lock;
+static int ftdi_instances = 0;
+static struct list_head ftdi_static_list;
+/*
+ * end of the global variables protected by ftdi_module_lock
+ */
+#include "usb_u132.h"
+#include <asm/io.h>
+#include <linux/usb/hcd.h>
+
+/* FIXME ohci.h is ONLY for internal use by the OHCI driver.
+ * If you're going to try stuff like this, you need to split
+ * out shareable stuff (register declarations?) into its own
+ * file, maybe name <linux/usb/ohci.h>
+ */
+
+#include "../host/ohci.h"
+/* Define these values to match your devices*/
+#define USB_FTDI_ELAN_VENDOR_ID 0x0403
+#define USB_FTDI_ELAN_PRODUCT_ID 0xd6ea
+/* table of devices that work with this driver*/
+static const struct usb_device_id ftdi_elan_table[] = {
+	{USB_DEVICE(USB_FTDI_ELAN_VENDOR_ID, USB_FTDI_ELAN_PRODUCT_ID)},
+	{ /* Terminating entry */ }
+};
+
+MODULE_DEVICE_TABLE(usb, ftdi_elan_table);
+/* only the jtag(firmware upgrade device) interface requires
+ * a device file and corresponding minor number, but the
+ * interface is created unconditionally - I suppose it could
+ * be configured or not according to a module parameter.
+ * But since we(now) require one interface per device,
+ * and since it unlikely that a normal installation would
+ * require more than a couple of elan-ftdi devices, 8 seems
+ * like a reasonable limit to have here, and if someone
+ * really requires more than 8 devices, then they can frig the
+ * code and recompile
+ */
+#define USB_FTDI_ELAN_MINOR_BASE 192
+#define COMMAND_BITS 5
+#define COMMAND_SIZE (1<<COMMAND_BITS)
+#define COMMAND_MASK (COMMAND_SIZE-1)
+struct u132_command {
+	u8 header;
+	u16 length;
+	u8 address;
+	u8 width;
+	u32 value;
+	int follows;
+	void *buffer;
+};
+#define RESPOND_BITS 5
+#define RESPOND_SIZE (1<<RESPOND_BITS)
+#define RESPOND_MASK (RESPOND_SIZE-1)
+struct u132_respond {
+	u8 header;
+	u8 address;
+	u32 *value;
+	int *result;
+	struct completion wait_completion;
+};
+struct u132_target {
+	void *endp;
+	struct urb *urb;
+	int toggle_bits;
+	int error_count;
+	int condition_code;
+	int repeat_number;
+	int halted;
+	int skipped;
+	int actual;
+	int non_null;
+	int active;
+	int abandoning;
+	void (*callback)(void *endp, struct urb *urb, u8 *buf, int len,
+			 int toggle_bits, int error_count, int condition_code,
+			 int repeat_number, int halted, int skipped, int actual,
+			 int non_null);
+};
+/* Structure to hold all of our device specific stuff*/
+struct usb_ftdi {
+	struct list_head ftdi_list;
+	struct mutex u132_lock;
+	int command_next;
+	int command_head;
+	struct u132_command command[COMMAND_SIZE];
+	int respond_next;
+	int respond_head;
+	struct u132_respond respond[RESPOND_SIZE];
+	struct u132_target target[4];
+	char device_name[16];
+	unsigned synchronized:1;
+	unsigned enumerated:1;
+	unsigned registered:1;
+	unsigned initialized:1;
+	unsigned card_ejected:1;
+	int function;
+	int sequence_num;
+	int disconnected;
+	int gone_away;
+	int stuck_status;
+	int status_queue_delay;
+	struct semaphore sw_lock;
+	struct usb_device *udev;
+	struct usb_interface *interface;
+	struct usb_class_driver *class;
+	struct delayed_work status_work;
+	struct delayed_work command_work;
+	struct delayed_work respond_work;
+	struct u132_platform_data platform_data;
+	struct resource resources[0];
+	struct platform_device platform_dev;
+	unsigned char *bulk_in_buffer;
+	size_t bulk_in_size;
+	size_t bulk_in_last;
+	size_t bulk_in_left;
+	__u8 bulk_in_endpointAddr;
+	__u8 bulk_out_endpointAddr;
+	struct kref kref;
+	u32 controlreg;
+	u8 response[4 + 1024];
+	int expected;
+	int received;
+	int ed_found;
+};
+#define kref_to_usb_ftdi(d) container_of(d, struct usb_ftdi, kref)
+#define platform_device_to_usb_ftdi(d) container_of(d, struct usb_ftdi, \
+						    platform_dev)
+static struct usb_driver ftdi_elan_driver;
+static void ftdi_elan_delete(struct kref *kref)
+{
+	struct usb_ftdi *ftdi = kref_to_usb_ftdi(kref);
+	dev_warn(&ftdi->udev->dev, "FREEING ftdi=%p\n", ftdi);
+	usb_put_dev(ftdi->udev);
+	ftdi->disconnected += 1;
+	mutex_lock(&ftdi_module_lock);
+	list_del_init(&ftdi->ftdi_list);
+	ftdi_instances -= 1;
+	mutex_unlock(&ftdi_module_lock);
+	kfree(ftdi->bulk_in_buffer);
+	ftdi->bulk_in_buffer = NULL;
+	kfree(ftdi);
+}
+
+static void ftdi_elan_put_kref(struct usb_ftdi *ftdi)
+{
+	kref_put(&ftdi->kref, ftdi_elan_delete);
+}
+
+static void ftdi_elan_get_kref(struct usb_ftdi *ftdi)
+{
+	kref_get(&ftdi->kref);
+}
+
+static void ftdi_elan_init_kref(struct usb_ftdi *ftdi)
+{
+	kref_init(&ftdi->kref);
+}
+
+static void ftdi_status_requeue_work(struct usb_ftdi *ftdi, unsigned int delta)
+{
+	if (!schedule_delayed_work(&ftdi->status_work, delta))
+		kref_put(&ftdi->kref, ftdi_elan_delete);
+}
+
+static void ftdi_status_queue_work(struct usb_ftdi *ftdi, unsigned int delta)
+{
+	if (schedule_delayed_work(&ftdi->status_work, delta))
+		kref_get(&ftdi->kref);
+}
+
+static void ftdi_status_cancel_work(struct usb_ftdi *ftdi)
+{
+	if (cancel_delayed_work_sync(&ftdi->status_work))
+		kref_put(&ftdi->kref, ftdi_elan_delete);
+}
+
+static void ftdi_command_requeue_work(struct usb_ftdi *ftdi, unsigned int delta)
+{
+	if (!schedule_delayed_work(&ftdi->command_work, delta))
+		kref_put(&ftdi->kref, ftdi_elan_delete);
+}
+
+static void ftdi_command_queue_work(struct usb_ftdi *ftdi, unsigned int delta)
+{
+	if (schedule_delayed_work(&ftdi->command_work, delta))
+		kref_get(&ftdi->kref);
+}
+
+static void ftdi_command_cancel_work(struct usb_ftdi *ftdi)
+{
+	if (cancel_delayed_work_sync(&ftdi->command_work))
+		kref_put(&ftdi->kref, ftdi_elan_delete);
+}
+
+static void ftdi_response_requeue_work(struct usb_ftdi *ftdi,
+				       unsigned int delta)
+{
+	if (!schedule_delayed_work(&ftdi->respond_work, delta))
+		kref_put(&ftdi->kref, ftdi_elan_delete);
+}
+
+static void ftdi_respond_queue_work(struct usb_ftdi *ftdi, unsigned int delta)
+{
+	if (schedule_delayed_work(&ftdi->respond_work, delta))
+		kref_get(&ftdi->kref);
+}
+
+static void ftdi_response_cancel_work(struct usb_ftdi *ftdi)
+{
+	if (cancel_delayed_work_sync(&ftdi->respond_work))
+		kref_put(&ftdi->kref, ftdi_elan_delete);
+}
+
+void ftdi_elan_gone_away(struct platform_device *pdev)
+{
+	struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+	ftdi->gone_away += 1;
+	ftdi_elan_put_kref(ftdi);
+}
+
+
+EXPORT_SYMBOL_GPL(ftdi_elan_gone_away);
+static void ftdi_release_platform_dev(struct device *dev)
+{
+	dev->parent = NULL;
+}
+
+static void ftdi_elan_do_callback(struct usb_ftdi *ftdi,
+				  struct u132_target *target, u8 *buffer, int length);
+static void ftdi_elan_kick_command_queue(struct usb_ftdi *ftdi);
+static void ftdi_elan_kick_respond_queue(struct usb_ftdi *ftdi);
+static int ftdi_elan_setupOHCI(struct usb_ftdi *ftdi);
+static int ftdi_elan_checkingPCI(struct usb_ftdi *ftdi);
+static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi);
+static int ftdi_elan_synchronize(struct usb_ftdi *ftdi);
+static int ftdi_elan_stuck_waiting(struct usb_ftdi *ftdi);
+static int ftdi_elan_command_engine(struct usb_ftdi *ftdi);
+static int ftdi_elan_respond_engine(struct usb_ftdi *ftdi);
+static int ftdi_elan_hcd_init(struct usb_ftdi *ftdi)
+{
+	if (ftdi->platform_dev.dev.parent)
+		return -EBUSY;
+
+	ftdi_elan_get_kref(ftdi);
+	ftdi->platform_data.potpg = 100;
+	ftdi->platform_data.reset = NULL;
+	ftdi->platform_dev.id = ftdi->sequence_num;
+	ftdi->platform_dev.resource = ftdi->resources;
+	ftdi->platform_dev.num_resources = ARRAY_SIZE(ftdi->resources);
+	ftdi->platform_dev.dev.platform_data = &ftdi->platform_data;
+	ftdi->platform_dev.dev.parent = NULL;
+	ftdi->platform_dev.dev.release = ftdi_release_platform_dev;
+	ftdi->platform_dev.dev.dma_mask = NULL;
+	snprintf(ftdi->device_name, sizeof(ftdi->device_name), "u132_hcd");
+	ftdi->platform_dev.name = ftdi->device_name;
+	dev_info(&ftdi->udev->dev, "requesting module '%s'\n", "u132_hcd");
+	request_module("u132_hcd");
+	dev_info(&ftdi->udev->dev, "registering '%s'\n",
+		 ftdi->platform_dev.name);
+
+	return platform_device_register(&ftdi->platform_dev);
+}
+
+static void ftdi_elan_abandon_completions(struct usb_ftdi *ftdi)
+{
+	mutex_lock(&ftdi->u132_lock);
+	while (ftdi->respond_next > ftdi->respond_head) {
+		struct u132_respond *respond = &ftdi->respond[RESPOND_MASK &
+							      ftdi->respond_head++];
+		*respond->result = -ESHUTDOWN;
+		*respond->value = 0;
+		complete(&respond->wait_completion);
+	}
+	mutex_unlock(&ftdi->u132_lock);
+}
+
+static void ftdi_elan_abandon_targets(struct usb_ftdi *ftdi)
+{
+	int ed_number = 4;
+	mutex_lock(&ftdi->u132_lock);
+	while (ed_number-- > 0) {
+		struct u132_target *target = &ftdi->target[ed_number];
+		if (target->active == 1) {
+			target->condition_code = TD_DEVNOTRESP;
+			mutex_unlock(&ftdi->u132_lock);
+			ftdi_elan_do_callback(ftdi, target, NULL, 0);
+			mutex_lock(&ftdi->u132_lock);
+		}
+	}
+	ftdi->received = 0;
+	ftdi->expected = 4;
+	ftdi->ed_found = 0;
+	mutex_unlock(&ftdi->u132_lock);
+}
+
+static void ftdi_elan_flush_targets(struct usb_ftdi *ftdi)
+{
+	int ed_number = 4;
+	mutex_lock(&ftdi->u132_lock);
+	while (ed_number-- > 0) {
+		struct u132_target *target = &ftdi->target[ed_number];
+		target->abandoning = 1;
+	wait_1:if (target->active == 1) {
+			int command_size = ftdi->command_next -
+				ftdi->command_head;
+			if (command_size < COMMAND_SIZE) {
+				struct u132_command *command = &ftdi->command[
+					COMMAND_MASK & ftdi->command_next];
+				command->header = 0x80 | (ed_number << 5) | 0x4;
+				command->length = 0x00;
+				command->address = 0x00;
+				command->width = 0x00;
+				command->follows = 0;
+				command->value = 0;
+				command->buffer = &command->value;
+				ftdi->command_next += 1;
+				ftdi_elan_kick_command_queue(ftdi);
+			} else {
+				mutex_unlock(&ftdi->u132_lock);
+				msleep(100);
+				mutex_lock(&ftdi->u132_lock);
+				goto wait_1;
+			}
+		}
+	wait_2:if (target->active == 1) {
+			int command_size = ftdi->command_next -
+				ftdi->command_head;
+			if (command_size < COMMAND_SIZE) {
+				struct u132_command *command = &ftdi->command[
+					COMMAND_MASK & ftdi->command_next];
+				command->header = 0x90 | (ed_number << 5);
+				command->length = 0x00;
+				command->address = 0x00;
+				command->width = 0x00;
+				command->follows = 0;
+				command->value = 0;
+				command->buffer = &command->value;
+				ftdi->command_next += 1;
+				ftdi_elan_kick_command_queue(ftdi);
+			} else {
+				mutex_unlock(&ftdi->u132_lock);
+				msleep(100);
+				mutex_lock(&ftdi->u132_lock);
+				goto wait_2;
+			}
+		}
+	}
+	ftdi->received = 0;
+	ftdi->expected = 4;
+	ftdi->ed_found = 0;
+	mutex_unlock(&ftdi->u132_lock);
+}
+
+static void ftdi_elan_cancel_targets(struct usb_ftdi *ftdi)
+{
+	int ed_number = 4;
+	mutex_lock(&ftdi->u132_lock);
+	while (ed_number-- > 0) {
+		struct u132_target *target = &ftdi->target[ed_number];
+		target->abandoning = 1;
+	wait:if (target->active == 1) {
+			int command_size = ftdi->command_next -
+				ftdi->command_head;
+			if (command_size < COMMAND_SIZE) {
+				struct u132_command *command = &ftdi->command[
+					COMMAND_MASK & ftdi->command_next];
+				command->header = 0x80 | (ed_number << 5) | 0x4;
+				command->length = 0x00;
+				command->address = 0x00;
+				command->width = 0x00;
+				command->follows = 0;
+				command->value = 0;
+				command->buffer = &command->value;
+				ftdi->command_next += 1;
+				ftdi_elan_kick_command_queue(ftdi);
+			} else {
+				mutex_unlock(&ftdi->u132_lock);
+				msleep(100);
+				mutex_lock(&ftdi->u132_lock);
+				goto wait;
+			}
+		}
+	}
+	ftdi->received = 0;
+	ftdi->expected = 4;
+	ftdi->ed_found = 0;
+	mutex_unlock(&ftdi->u132_lock);
+}
+
+static void ftdi_elan_kick_command_queue(struct usb_ftdi *ftdi)
+{
+	ftdi_command_queue_work(ftdi, 0);
+}
+
+static void ftdi_elan_command_work(struct work_struct *work)
+{
+	struct usb_ftdi *ftdi =
+		container_of(work, struct usb_ftdi, command_work.work);
+
+	if (ftdi->disconnected > 0) {
+		ftdi_elan_put_kref(ftdi);
+		return;
+	} else {
+		int retval = ftdi_elan_command_engine(ftdi);
+		if (retval == -ESHUTDOWN) {
+			ftdi->disconnected += 1;
+		} else if (retval == -ENODEV) {
+			ftdi->disconnected += 1;
+		} else if (retval)
+			dev_err(&ftdi->udev->dev, "command error %d\n", retval);
+		ftdi_command_requeue_work(ftdi, msecs_to_jiffies(10));
+		return;
+	}
+}
+
+static void ftdi_elan_kick_respond_queue(struct usb_ftdi *ftdi)
+{
+	ftdi_respond_queue_work(ftdi, 0);
+}
+
+static void ftdi_elan_respond_work(struct work_struct *work)
+{
+	struct usb_ftdi *ftdi =
+		container_of(work, struct usb_ftdi, respond_work.work);
+	if (ftdi->disconnected > 0) {
+		ftdi_elan_put_kref(ftdi);
+		return;
+	} else {
+		int retval = ftdi_elan_respond_engine(ftdi);
+		if (retval == 0) {
+		} else if (retval == -ESHUTDOWN) {
+			ftdi->disconnected += 1;
+		} else if (retval == -ENODEV) {
+			ftdi->disconnected += 1;
+		} else if (retval == -EILSEQ) {
+			ftdi->disconnected += 1;
+		} else {
+			ftdi->disconnected += 1;
+			dev_err(&ftdi->udev->dev, "respond error %d\n", retval);
+		}
+		if (ftdi->disconnected > 0) {
+			ftdi_elan_abandon_completions(ftdi);
+			ftdi_elan_abandon_targets(ftdi);
+		}
+		ftdi_response_requeue_work(ftdi, msecs_to_jiffies(10));
+		return;
+	}
+}
+
+
+/*
+ * the sw_lock is initially held and will be freed
+ * after the FTDI has been synchronized
+ *
+ */
+static void ftdi_elan_status_work(struct work_struct *work)
+{
+	struct usb_ftdi *ftdi =
+		container_of(work, struct usb_ftdi, status_work.work);
+	int work_delay_in_msec = 0;
+	if (ftdi->disconnected > 0) {
+		ftdi_elan_put_kref(ftdi);
+		return;
+	} else if (ftdi->synchronized == 0) {
+		down(&ftdi->sw_lock);
+		if (ftdi_elan_synchronize(ftdi) == 0) {
+			ftdi->synchronized = 1;
+			ftdi_command_queue_work(ftdi, 1);
+			ftdi_respond_queue_work(ftdi, 1);
+			up(&ftdi->sw_lock);
+			work_delay_in_msec = 100;
+		} else {
+			dev_err(&ftdi->udev->dev, "synchronize failed\n");
+			up(&ftdi->sw_lock);
+			work_delay_in_msec = 10 *1000;
+		}
+	} else if (ftdi->stuck_status > 0) {
+		if (ftdi_elan_stuck_waiting(ftdi) == 0) {
+			ftdi->stuck_status = 0;
+			ftdi->synchronized = 0;
+		} else if ((ftdi->stuck_status++ % 60) == 1) {
+			dev_err(&ftdi->udev->dev, "WRONG type of card inserted - please remove\n");
+		} else
+			dev_err(&ftdi->udev->dev, "WRONG type of card inserted - checked %d times\n",
+				ftdi->stuck_status);
+		work_delay_in_msec = 100;
+	} else if (ftdi->enumerated == 0) {
+		if (ftdi_elan_enumeratePCI(ftdi) == 0) {
+			ftdi->enumerated = 1;
+			work_delay_in_msec = 250;
+		} else
+			work_delay_in_msec = 1000;
+	} else if (ftdi->initialized == 0) {
+		if (ftdi_elan_setupOHCI(ftdi) == 0) {
+			ftdi->initialized = 1;
+			work_delay_in_msec = 500;
+		} else {
+			dev_err(&ftdi->udev->dev, "initialized failed - trying again in 10 seconds\n");
+			work_delay_in_msec = 1 *1000;
+		}
+	} else if (ftdi->registered == 0) {
+		work_delay_in_msec = 10;
+		if (ftdi_elan_hcd_init(ftdi) == 0) {
+			ftdi->registered = 1;
+		} else
+			dev_err(&ftdi->udev->dev, "register failed\n");
+		work_delay_in_msec = 250;
+	} else {
+		if (ftdi_elan_checkingPCI(ftdi) == 0) {
+			work_delay_in_msec = 250;
+		} else if (ftdi->controlreg & 0x00400000) {
+			if (ftdi->gone_away > 0) {
+				dev_err(&ftdi->udev->dev, "PCI device eject confirmed platform_dev.dev.parent=%p platform_dev.dev=%p\n",
+					ftdi->platform_dev.dev.parent,
+					&ftdi->platform_dev.dev);
+				platform_device_unregister(&ftdi->platform_dev);
+				ftdi->platform_dev.dev.parent = NULL;
+				ftdi->registered = 0;
+				ftdi->enumerated = 0;
+				ftdi->card_ejected = 0;
+				ftdi->initialized = 0;
+				ftdi->gone_away = 0;
+			} else
+				ftdi_elan_flush_targets(ftdi);
+			work_delay_in_msec = 250;
+		} else {
+			dev_err(&ftdi->udev->dev, "PCI device has disappeared\n");
+			ftdi_elan_cancel_targets(ftdi);
+			work_delay_in_msec = 500;
+			ftdi->enumerated = 0;
+			ftdi->initialized = 0;
+		}
+	}
+	if (ftdi->disconnected > 0) {
+		ftdi_elan_put_kref(ftdi);
+		return;
+	} else {
+		ftdi_status_requeue_work(ftdi,
+					 msecs_to_jiffies(work_delay_in_msec));
+		return;
+	}
+}
+
+
+/*
+ * file_operations for the jtag interface
+ *
+ * the usage count for the device is incremented on open()
+ * and decremented on release()
+ */
+static int ftdi_elan_open(struct inode *inode, struct file *file)
+{
+	int subminor;
+	struct usb_interface *interface;
+
+	subminor = iminor(inode);
+	interface = usb_find_interface(&ftdi_elan_driver, subminor);
+
+	if (!interface) {
+		pr_err("can't find device for minor %d\n", subminor);
+		return -ENODEV;
+	} else {
+		struct usb_ftdi *ftdi = usb_get_intfdata(interface);
+		if (!ftdi) {
+			return -ENODEV;
+		} else {
+			if (down_interruptible(&ftdi->sw_lock)) {
+				return -EINTR;
+			} else {
+				ftdi_elan_get_kref(ftdi);
+				file->private_data = ftdi;
+				return 0;
+			}
+		}
+	}
+}
+
+static int ftdi_elan_release(struct inode *inode, struct file *file)
+{
+	struct usb_ftdi *ftdi = file->private_data;
+	if (ftdi == NULL)
+		return -ENODEV;
+	up(&ftdi->sw_lock);        /* decrement the count on our device */
+	ftdi_elan_put_kref(ftdi);
+	return 0;
+}
+
+
+/*
+ *
+ * blocking bulk reads are used to get data from the device
+ *
+ */
+static ssize_t ftdi_elan_read(struct file *file, char __user *buffer,
+			      size_t count, loff_t *ppos)
+{
+	char data[30 *3 + 4];
+	char *d = data;
+	int m = (sizeof(data) - 1) / 3 - 1;
+	int bytes_read = 0;
+	int retry_on_empty = 10;
+	int retry_on_timeout = 5;
+	struct usb_ftdi *ftdi = file->private_data;
+	if (ftdi->disconnected > 0) {
+		return -ENODEV;
+	}
+	data[0] = 0;
+have:if (ftdi->bulk_in_left > 0) {
+		if (count-- > 0) {
+			char *p = ++ftdi->bulk_in_last + ftdi->bulk_in_buffer;
+			ftdi->bulk_in_left -= 1;
+			if (bytes_read < m) {
+				d += sprintf(d, " %02X", 0x000000FF & *p);
+			} else if (bytes_read > m) {
+			} else
+				d += sprintf(d, " ..");
+			if (copy_to_user(buffer++, p, 1)) {
+				return -EFAULT;
+			} else {
+				bytes_read += 1;
+				goto have;
+			}
+		} else
+			return bytes_read;
+	}
+more:if (count > 0) {
+		int packet_bytes = 0;
+		int retval = usb_bulk_msg(ftdi->udev,
+					  usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr),
+					  ftdi->bulk_in_buffer, ftdi->bulk_in_size,
+					  &packet_bytes, 50);
+		if (packet_bytes > 2) {
+			ftdi->bulk_in_left = packet_bytes - 2;
+			ftdi->bulk_in_last = 1;
+			goto have;
+		} else if (retval == -ETIMEDOUT) {
+			if (retry_on_timeout-- > 0) {
+				goto more;
+			} else if (bytes_read > 0) {
+				return bytes_read;
+			} else
+				return retval;
+		} else if (retval == 0) {
+			if (retry_on_empty-- > 0) {
+				goto more;
+			} else
+				return bytes_read;
+		} else
+			return retval;
+	} else
+		return bytes_read;
+}
+
+static void ftdi_elan_write_bulk_callback(struct urb *urb)
+{
+	struct usb_ftdi *ftdi = urb->context;
+	int status = urb->status;
+
+	if (status && !(status == -ENOENT || status == -ECONNRESET ||
+			status == -ESHUTDOWN)) {
+		dev_err(&ftdi->udev->dev,
+			"urb=%p write bulk status received: %d\n", urb, status);
+	}
+	usb_free_coherent(urb->dev, urb->transfer_buffer_length,
+			  urb->transfer_buffer, urb->transfer_dma);
+}
+
+static int fill_buffer_with_all_queued_commands(struct usb_ftdi *ftdi,
+						char *buf, int command_size, int total_size)
+{
+	int ed_commands = 0;
+	int b = 0;
+	int I = command_size;
+	int i = ftdi->command_head;
+	while (I-- > 0) {
+		struct u132_command *command = &ftdi->command[COMMAND_MASK &
+							      i++];
+		int F = command->follows;
+		u8 *f = command->buffer;
+		if (command->header & 0x80) {
+			ed_commands |= 1 << (0x3 & (command->header >> 5));
+		}
+		buf[b++] = command->header;
+		buf[b++] = (command->length >> 0) & 0x00FF;
+		buf[b++] = (command->length >> 8) & 0x00FF;
+		buf[b++] = command->address;
+		buf[b++] = command->width;
+		while (F-- > 0) {
+			buf[b++] = *f++;
+		}
+	}
+	return ed_commands;
+}
+
+static int ftdi_elan_total_command_size(struct usb_ftdi *ftdi, int command_size)
+{
+	int total_size = 0;
+	int I = command_size;
+	int i = ftdi->command_head;
+	while (I-- > 0) {
+		struct u132_command *command = &ftdi->command[COMMAND_MASK &
+							      i++];
+		total_size += 5 + command->follows;
+	}
+	return total_size;
+}
+
+static int ftdi_elan_command_engine(struct usb_ftdi *ftdi)
+{
+	int retval;
+	char *buf;
+	int ed_commands;
+	int total_size;
+	struct urb *urb;
+	int command_size = ftdi->command_next - ftdi->command_head;
+	if (command_size == 0)
+		return 0;
+	total_size = ftdi_elan_total_command_size(ftdi, command_size);
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+	buf = usb_alloc_coherent(ftdi->udev, total_size, GFP_KERNEL,
+				 &urb->transfer_dma);
+	if (!buf) {
+		dev_err(&ftdi->udev->dev, "could not get a buffer to write %d commands totaling %d bytes to the Uxxx\n",
+			command_size, total_size);
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+	ed_commands = fill_buffer_with_all_queued_commands(ftdi, buf,
+							   command_size, total_size);
+	usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev,
+							   ftdi->bulk_out_endpointAddr), buf, total_size,
+			  ftdi_elan_write_bulk_callback, ftdi);
+	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	if (ed_commands) {
+		char diag[40 *3 + 4];
+		char *d = diag;
+		int m = total_size;
+		u8 *c = buf;
+		int s = (sizeof(diag) - 1) / 3;
+		diag[0] = 0;
+		while (s-- > 0 && m-- > 0) {
+			if (s > 0 || m == 0) {
+				d += sprintf(d, " %02X", *c++);
+			} else
+				d += sprintf(d, " ..");
+		}
+	}
+	retval = usb_submit_urb(urb, GFP_KERNEL);
+	if (retval) {
+		dev_err(&ftdi->udev->dev, "failed %d to submit urb %p to write %d commands totaling %d bytes to the Uxxx\n",
+			retval, urb, command_size, total_size);
+		usb_free_coherent(ftdi->udev, total_size, buf, urb->transfer_dma);
+		usb_free_urb(urb);
+		return retval;
+	}
+	usb_free_urb(urb);        /* release our reference to this urb,
+				     the USB core will eventually free it entirely */
+	ftdi->command_head += command_size;
+	ftdi_elan_kick_respond_queue(ftdi);
+	return 0;
+}
+
+static void ftdi_elan_do_callback(struct usb_ftdi *ftdi,
+				  struct u132_target *target, u8 *buffer, int length)
+{
+	struct urb *urb = target->urb;
+	int halted = target->halted;
+	int skipped = target->skipped;
+	int actual = target->actual;
+	int non_null = target->non_null;
+	int toggle_bits = target->toggle_bits;
+	int error_count = target->error_count;
+	int condition_code = target->condition_code;
+	int repeat_number = target->repeat_number;
+	void (*callback) (void *, struct urb *, u8 *, int, int, int, int, int,
+			  int, int, int, int) = target->callback;
+	target->active -= 1;
+	target->callback = NULL;
+	(*callback) (target->endp, urb, buffer, length, toggle_bits,
+		     error_count, condition_code, repeat_number, halted, skipped,
+		     actual, non_null);
+}
+
+static char *have_ed_set_response(struct usb_ftdi *ftdi,
+				  struct u132_target *target, u16 ed_length, int ed_number, int ed_type,
+				  char *b)
+{
+	int payload = (ed_length >> 0) & 0x07FF;
+	mutex_lock(&ftdi->u132_lock);
+	target->actual = 0;
+	target->non_null = (ed_length >> 15) & 0x0001;
+	target->repeat_number = (ed_length >> 11) & 0x000F;
+	if (ed_type == 0x02 || ed_type == 0x03) {
+		if (payload == 0 || target->abandoning > 0) {
+			target->abandoning = 0;
+			mutex_unlock(&ftdi->u132_lock);
+			ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
+					      payload);
+			ftdi->received = 0;
+			ftdi->expected = 4;
+			ftdi->ed_found = 0;
+			return ftdi->response;
+		} else {
+			ftdi->expected = 4 + payload;
+			ftdi->ed_found = 1;
+			mutex_unlock(&ftdi->u132_lock);
+			return b;
+		}
+	} else {
+		target->abandoning = 0;
+		mutex_unlock(&ftdi->u132_lock);
+		ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
+				      payload);
+		ftdi->received = 0;
+		ftdi->expected = 4;
+		ftdi->ed_found = 0;
+		return ftdi->response;
+	}
+}
+
+static char *have_ed_get_response(struct usb_ftdi *ftdi,
+				  struct u132_target *target, u16 ed_length, int ed_number, int ed_type,
+				  char *b)
+{
+	mutex_lock(&ftdi->u132_lock);
+	target->condition_code = TD_DEVNOTRESP;
+	target->actual = (ed_length >> 0) & 0x01FF;
+	target->non_null = (ed_length >> 15) & 0x0001;
+	target->repeat_number = (ed_length >> 11) & 0x000F;
+	mutex_unlock(&ftdi->u132_lock);
+	if (target->active)
+		ftdi_elan_do_callback(ftdi, target, NULL, 0);
+	target->abandoning = 0;
+	ftdi->received = 0;
+	ftdi->expected = 4;
+	ftdi->ed_found = 0;
+	return ftdi->response;
+}
+
+
+/*
+ * The engine tries to empty the FTDI fifo
+ *
+ * all responses found in the fifo data are dispatched thus
+ * the response buffer can only ever hold a maximum sized
+ * response from the Uxxx.
+ *
+ */
+static int ftdi_elan_respond_engine(struct usb_ftdi *ftdi)
+{
+	u8 *b = ftdi->response + ftdi->received;
+	int bytes_read = 0;
+	int retry_on_empty = 1;
+	int retry_on_timeout = 3;
+read:{
+		int packet_bytes = 0;
+		int retval = usb_bulk_msg(ftdi->udev,
+					  usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr),
+					  ftdi->bulk_in_buffer, ftdi->bulk_in_size,
+					  &packet_bytes, 500);
+		char diag[30 *3 + 4];
+		char *d = diag;
+		int m = packet_bytes;
+		u8 *c = ftdi->bulk_in_buffer;
+		int s = (sizeof(diag) - 1) / 3;
+		diag[0] = 0;
+		while (s-- > 0 && m-- > 0) {
+			if (s > 0 || m == 0) {
+				d += sprintf(d, " %02X", *c++);
+			} else
+				d += sprintf(d, " ..");
+		}
+		if (packet_bytes > 2) {
+			ftdi->bulk_in_left = packet_bytes - 2;
+			ftdi->bulk_in_last = 1;
+			goto have;
+		} else if (retval == -ETIMEDOUT) {
+			if (retry_on_timeout-- > 0) {
+				dev_err(&ftdi->udev->dev, "TIMED OUT with packet_bytes = %d with total %d bytes%s\n",
+					packet_bytes, bytes_read, diag);
+				goto more;
+			} else if (bytes_read > 0) {
+				dev_err(&ftdi->udev->dev, "ONLY %d bytes%s\n",
+					bytes_read, diag);
+				return -ENOMEM;
+			} else {
+				dev_err(&ftdi->udev->dev, "TIMED OUT with packet_bytes = %d with total %d bytes%s\n",
+					packet_bytes, bytes_read, diag);
+				return -ENOMEM;
+			}
+		} else if (retval == -EILSEQ) {
+			dev_err(&ftdi->udev->dev, "error = %d with packet_bytes = %d with total %d bytes%s\n",
+				retval, packet_bytes, bytes_read, diag);
+			return retval;
+		} else if (retval) {
+			dev_err(&ftdi->udev->dev, "error = %d with packet_bytes = %d with total %d bytes%s\n",
+				retval, packet_bytes, bytes_read, diag);
+			return retval;
+		} else {
+			if (retry_on_empty-- > 0) {
+				goto more;
+			} else
+				return 0;
+		}
+	}
+more:{
+		goto read;
+	}
+have:if (ftdi->bulk_in_left > 0) {
+		u8 c = ftdi->bulk_in_buffer[++ftdi->bulk_in_last];
+		bytes_read += 1;
+		ftdi->bulk_in_left -= 1;
+		if (ftdi->received == 0 && c == 0xFF) {
+			goto have;
+		} else
+			*b++ = c;
+		if (++ftdi->received < ftdi->expected) {
+			goto have;
+		} else if (ftdi->ed_found) {
+			int ed_number = (ftdi->response[0] >> 5) & 0x03;
+			u16 ed_length = (ftdi->response[2] << 8) |
+				ftdi->response[1];
+			struct u132_target *target = &ftdi->target[ed_number];
+			int payload = (ed_length >> 0) & 0x07FF;
+			char diag[30 *3 + 4];
+			char *d = diag;
+			int m = payload;
+			u8 *c = 4 + ftdi->response;
+			int s = (sizeof(diag) - 1) / 3;
+			diag[0] = 0;
+			while (s-- > 0 && m-- > 0) {
+				if (s > 0 || m == 0) {
+					d += sprintf(d, " %02X", *c++);
+				} else
+					d += sprintf(d, " ..");
+			}
+			ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
+					      payload);
+			ftdi->received = 0;
+			ftdi->expected = 4;
+			ftdi->ed_found = 0;
+			b = ftdi->response;
+			goto have;
+		} else if (ftdi->expected == 8) {
+			u8 buscmd;
+			int respond_head = ftdi->respond_head++;
+			struct u132_respond *respond = &ftdi->respond[
+				RESPOND_MASK & respond_head];
+			u32 data = ftdi->response[7];
+			data <<= 8;
+			data |= ftdi->response[6];
+			data <<= 8;
+			data |= ftdi->response[5];
+			data <<= 8;
+			data |= ftdi->response[4];
+			*respond->value = data;
+			*respond->result = 0;
+			complete(&respond->wait_completion);
+			ftdi->received = 0;
+			ftdi->expected = 4;
+			ftdi->ed_found = 0;
+			b = ftdi->response;
+			buscmd = (ftdi->response[0] >> 0) & 0x0F;
+			if (buscmd == 0x00) {
+			} else if (buscmd == 0x02) {
+			} else if (buscmd == 0x06) {
+			} else if (buscmd == 0x0A) {
+			} else
+				dev_err(&ftdi->udev->dev, "Uxxx unknown(%0X) value = %08X\n",
+					buscmd, data);
+			goto have;
+		} else {
+			if ((ftdi->response[0] & 0x80) == 0x00) {
+				ftdi->expected = 8;
+				goto have;
+			} else {
+				int ed_number = (ftdi->response[0] >> 5) & 0x03;
+				int ed_type = (ftdi->response[0] >> 0) & 0x03;
+				u16 ed_length = (ftdi->response[2] << 8) |
+					ftdi->response[1];
+				struct u132_target *target = &ftdi->target[
+					ed_number];
+				target->halted = (ftdi->response[0] >> 3) &
+					0x01;
+				target->skipped = (ftdi->response[0] >> 2) &
+					0x01;
+				target->toggle_bits = (ftdi->response[3] >> 6)
+					& 0x03;
+				target->error_count = (ftdi->response[3] >> 4)
+					& 0x03;
+				target->condition_code = (ftdi->response[
+								  3] >> 0) & 0x0F;
+				if ((ftdi->response[0] & 0x10) == 0x00) {
+					b = have_ed_set_response(ftdi, target,
+								 ed_length, ed_number, ed_type,
+								 b);
+					goto have;
+				} else {
+					b = have_ed_get_response(ftdi, target,
+								 ed_length, ed_number, ed_type,
+								 b);
+					goto have;
+				}
+			}
+		}
+	} else
+		goto more;
+}
+
+
+/*
+ * create a urb, and a buffer for it, and copy the data to the urb
+ *
+ */
+static ssize_t ftdi_elan_write(struct file *file,
+			       const char __user *user_buffer, size_t count,
+			       loff_t *ppos)
+{
+	int retval = 0;
+	struct urb *urb;
+	char *buf;
+	struct usb_ftdi *ftdi = file->private_data;
+
+	if (ftdi->disconnected > 0) {
+		return -ENODEV;
+	}
+	if (count == 0) {
+		goto exit;
+	}
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb) {
+		retval = -ENOMEM;
+		goto error_1;
+	}
+	buf = usb_alloc_coherent(ftdi->udev, count, GFP_KERNEL,
+				 &urb->transfer_dma);
+	if (!buf) {
+		retval = -ENOMEM;
+		goto error_2;
+	}
+	if (copy_from_user(buf, user_buffer, count)) {
+		retval = -EFAULT;
+		goto error_3;
+	}
+	usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev,
+							   ftdi->bulk_out_endpointAddr), buf, count,
+			  ftdi_elan_write_bulk_callback, ftdi);
+	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	retval = usb_submit_urb(urb, GFP_KERNEL);
+	if (retval) {
+		dev_err(&ftdi->udev->dev,
+			"failed submitting write urb, error %d\n", retval);
+		goto error_3;
+	}
+	usb_free_urb(urb);
+
+exit:
+	return count;
+error_3:
+	usb_free_coherent(ftdi->udev, count, buf, urb->transfer_dma);
+error_2:
+	usb_free_urb(urb);
+error_1:
+	return retval;
+}
+
+static const struct file_operations ftdi_elan_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.read = ftdi_elan_read,
+	.write = ftdi_elan_write,
+	.open = ftdi_elan_open,
+	.release = ftdi_elan_release,
+};
+
+/*
+ * usb class driver info in order to get a minor number from the usb core,
+ * and to have the device registered with the driver core
+ */
+static struct usb_class_driver ftdi_elan_jtag_class = {
+	.name = "ftdi-%d-jtag",
+	.fops = &ftdi_elan_fops,
+	.minor_base = USB_FTDI_ELAN_MINOR_BASE,
+};
+
+/*
+ * the following definitions are for the
+ * ELAN FPGA state machgine processor that
+ * lies on the other side of the FTDI chip
+ */
+#define cPCIu132rd 0x0
+#define cPCIu132wr 0x1
+#define cPCIiord 0x2
+#define cPCIiowr 0x3
+#define cPCImemrd 0x6
+#define cPCImemwr 0x7
+#define cPCIcfgrd 0xA
+#define cPCIcfgwr 0xB
+#define cPCInull 0xF
+#define cU132cmd_status 0x0
+#define cU132flash 0x1
+#define cPIDsetup 0x0
+#define cPIDout 0x1
+#define cPIDin 0x2
+#define cPIDinonce 0x3
+#define cCCnoerror 0x0
+#define cCCcrc 0x1
+#define cCCbitstuff 0x2
+#define cCCtoggle 0x3
+#define cCCstall 0x4
+#define cCCnoresp 0x5
+#define cCCbadpid1 0x6
+#define cCCbadpid2 0x7
+#define cCCdataoverrun 0x8
+#define cCCdataunderrun 0x9
+#define cCCbuffoverrun 0xC
+#define cCCbuffunderrun 0xD
+#define cCCnotaccessed 0xF
+static int ftdi_elan_write_reg(struct usb_ftdi *ftdi, u32 data)
+{
+wait:if (ftdi->disconnected > 0) {
+		return -ENODEV;
+	} else {
+		int command_size;
+		mutex_lock(&ftdi->u132_lock);
+		command_size = ftdi->command_next - ftdi->command_head;
+		if (command_size < COMMAND_SIZE) {
+			struct u132_command *command = &ftdi->command[
+				COMMAND_MASK & ftdi->command_next];
+			command->header = 0x00 | cPCIu132wr;
+			command->length = 0x04;
+			command->address = 0x00;
+			command->width = 0x00;
+			command->follows = 4;
+			command->value = data;
+			command->buffer = &command->value;
+			ftdi->command_next += 1;
+			ftdi_elan_kick_command_queue(ftdi);
+			mutex_unlock(&ftdi->u132_lock);
+			return 0;
+		} else {
+			mutex_unlock(&ftdi->u132_lock);
+			msleep(100);
+			goto wait;
+		}
+	}
+}
+
+static int ftdi_elan_write_config(struct usb_ftdi *ftdi, int config_offset,
+				  u8 width, u32 data)
+{
+	u8 addressofs = config_offset / 4;
+wait:if (ftdi->disconnected > 0) {
+		return -ENODEV;
+	} else {
+		int command_size;
+		mutex_lock(&ftdi->u132_lock);
+		command_size = ftdi->command_next - ftdi->command_head;
+		if (command_size < COMMAND_SIZE) {
+			struct u132_command *command = &ftdi->command[
+				COMMAND_MASK & ftdi->command_next];
+			command->header = 0x00 | (cPCIcfgwr & 0x0F);
+			command->length = 0x04;
+			command->address = addressofs;
+			command->width = 0x00 | (width & 0x0F);
+			command->follows = 4;
+			command->value = data;
+			command->buffer = &command->value;
+			ftdi->command_next += 1;
+			ftdi_elan_kick_command_queue(ftdi);
+			mutex_unlock(&ftdi->u132_lock);
+			return 0;
+		} else {
+			mutex_unlock(&ftdi->u132_lock);
+			msleep(100);
+			goto wait;
+		}
+	}
+}
+
+static int ftdi_elan_write_pcimem(struct usb_ftdi *ftdi, int mem_offset,
+				  u8 width, u32 data)
+{
+	u8 addressofs = mem_offset / 4;
+wait:if (ftdi->disconnected > 0) {
+		return -ENODEV;
+	} else {
+		int command_size;
+		mutex_lock(&ftdi->u132_lock);
+		command_size = ftdi->command_next - ftdi->command_head;
+		if (command_size < COMMAND_SIZE) {
+			struct u132_command *command = &ftdi->command[
+				COMMAND_MASK & ftdi->command_next];
+			command->header = 0x00 | (cPCImemwr & 0x0F);
+			command->length = 0x04;
+			command->address = addressofs;
+			command->width = 0x00 | (width & 0x0F);
+			command->follows = 4;
+			command->value = data;
+			command->buffer = &command->value;
+			ftdi->command_next += 1;
+			ftdi_elan_kick_command_queue(ftdi);
+			mutex_unlock(&ftdi->u132_lock);
+			return 0;
+		} else {
+			mutex_unlock(&ftdi->u132_lock);
+			msleep(100);
+			goto wait;
+		}
+	}
+}
+
+int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, int mem_offset,
+			       u8 width, u32 data)
+{
+	struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+	return ftdi_elan_write_pcimem(ftdi, mem_offset, width, data);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_write_pcimem);
+static int ftdi_elan_read_reg(struct usb_ftdi *ftdi, u32 *data)
+{
+wait:if (ftdi->disconnected > 0) {
+		return -ENODEV;
+	} else {
+		int command_size;
+		int respond_size;
+		mutex_lock(&ftdi->u132_lock);
+		command_size = ftdi->command_next - ftdi->command_head;
+		respond_size = ftdi->respond_next - ftdi->respond_head;
+		if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE)
+		{
+			struct u132_command *command = &ftdi->command[
+				COMMAND_MASK & ftdi->command_next];
+			struct u132_respond *respond = &ftdi->respond[
+				RESPOND_MASK & ftdi->respond_next];
+			int result = -ENODEV;
+			respond->result = &result;
+			respond->header = command->header = 0x00 | cPCIu132rd;
+			command->length = 0x04;
+			respond->address = command->address = cU132cmd_status;
+			command->width = 0x00;
+			command->follows = 0;
+			command->value = 0;
+			command->buffer = NULL;
+			respond->value = data;
+			init_completion(&respond->wait_completion);
+			ftdi->command_next += 1;
+			ftdi->respond_next += 1;
+			ftdi_elan_kick_command_queue(ftdi);
+			mutex_unlock(&ftdi->u132_lock);
+			wait_for_completion(&respond->wait_completion);
+			return result;
+		} else {
+			mutex_unlock(&ftdi->u132_lock);
+			msleep(100);
+			goto wait;
+		}
+	}
+}
+
+static int ftdi_elan_read_config(struct usb_ftdi *ftdi, int config_offset,
+				 u8 width, u32 *data)
+{
+	u8 addressofs = config_offset / 4;
+wait:if (ftdi->disconnected > 0) {
+		return -ENODEV;
+	} else {
+		int command_size;
+		int respond_size;
+		mutex_lock(&ftdi->u132_lock);
+		command_size = ftdi->command_next - ftdi->command_head;
+		respond_size = ftdi->respond_next - ftdi->respond_head;
+		if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE)
+		{
+			struct u132_command *command = &ftdi->command[
+				COMMAND_MASK & ftdi->command_next];
+			struct u132_respond *respond = &ftdi->respond[
+				RESPOND_MASK & ftdi->respond_next];
+			int result = -ENODEV;
+			respond->result = &result;
+			respond->header = command->header = 0x00 | (cPCIcfgrd &
+								    0x0F);
+			command->length = 0x04;
+			respond->address = command->address = addressofs;
+			command->width = 0x00 | (width & 0x0F);
+			command->follows = 0;
+			command->value = 0;
+			command->buffer = NULL;
+			respond->value = data;
+			init_completion(&respond->wait_completion);
+			ftdi->command_next += 1;
+			ftdi->respond_next += 1;
+			ftdi_elan_kick_command_queue(ftdi);
+			mutex_unlock(&ftdi->u132_lock);
+			wait_for_completion(&respond->wait_completion);
+			return result;
+		} else {
+			mutex_unlock(&ftdi->u132_lock);
+			msleep(100);
+			goto wait;
+		}
+	}
+}
+
+static int ftdi_elan_read_pcimem(struct usb_ftdi *ftdi, int mem_offset,
+				 u8 width, u32 *data)
+{
+	u8 addressofs = mem_offset / 4;
+wait:if (ftdi->disconnected > 0) {
+		return -ENODEV;
+	} else {
+		int command_size;
+		int respond_size;
+		mutex_lock(&ftdi->u132_lock);
+		command_size = ftdi->command_next - ftdi->command_head;
+		respond_size = ftdi->respond_next - ftdi->respond_head;
+		if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE)
+		{
+			struct u132_command *command = &ftdi->command[
+				COMMAND_MASK & ftdi->command_next];
+			struct u132_respond *respond = &ftdi->respond[
+				RESPOND_MASK & ftdi->respond_next];
+			int result = -ENODEV;
+			respond->result = &result;
+			respond->header = command->header = 0x00 | (cPCImemrd &
+								    0x0F);
+			command->length = 0x04;
+			respond->address = command->address = addressofs;
+			command->width = 0x00 | (width & 0x0F);
+			command->follows = 0;
+			command->value = 0;
+			command->buffer = NULL;
+			respond->value = data;
+			init_completion(&respond->wait_completion);
+			ftdi->command_next += 1;
+			ftdi->respond_next += 1;
+			ftdi_elan_kick_command_queue(ftdi);
+			mutex_unlock(&ftdi->u132_lock);
+			wait_for_completion(&respond->wait_completion);
+			return result;
+		} else {
+			mutex_unlock(&ftdi->u132_lock);
+			msleep(100);
+			goto wait;
+		}
+	}
+}
+
+int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, int mem_offset,
+			      u8 width, u32 *data)
+{
+	struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+	if (ftdi->initialized == 0) {
+		return -ENODEV;
+	} else
+		return ftdi_elan_read_pcimem(ftdi, mem_offset, width, data);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_read_pcimem);
+static int ftdi_elan_edset_setup(struct usb_ftdi *ftdi, u8 ed_number,
+				 void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+				 void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+						   int toggle_bits, int error_count, int condition_code, int repeat_number,
+						   int halted, int skipped, int actual, int non_null))
+{
+	u8 ed = ed_number - 1;
+wait:if (ftdi->disconnected > 0) {
+		return -ENODEV;
+	} else if (ftdi->initialized == 0) {
+		return -ENODEV;
+	} else {
+		int command_size;
+		mutex_lock(&ftdi->u132_lock);
+		command_size = ftdi->command_next - ftdi->command_head;
+		if (command_size < COMMAND_SIZE) {
+			struct u132_target *target = &ftdi->target[ed];
+			struct u132_command *command = &ftdi->command[
+				COMMAND_MASK & ftdi->command_next];
+			command->header = 0x80 | (ed << 5);
+			command->length = 0x8007;
+			command->address = (toggle_bits << 6) | (ep_number << 2)
+				| (address << 0);
+			command->width = usb_maxpacket(urb->dev, urb->pipe);
+			command->follows = 8;
+			command->value = 0;
+			command->buffer = urb->setup_packet;
+			target->callback = callback;
+			target->endp = endp;
+			target->urb = urb;
+			target->active = 1;
+			ftdi->command_next += 1;
+			ftdi_elan_kick_command_queue(ftdi);
+			mutex_unlock(&ftdi->u132_lock);
+			return 0;
+		} else {
+			mutex_unlock(&ftdi->u132_lock);
+			msleep(100);
+			goto wait;
+		}
+	}
+}
+
+int usb_ftdi_elan_edset_setup(struct platform_device *pdev, u8 ed_number,
+			      void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+			      void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+						int toggle_bits, int error_count, int condition_code, int repeat_number,
+						int halted, int skipped, int actual, int non_null))
+{
+	struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+	return ftdi_elan_edset_setup(ftdi, ed_number, endp, urb, address,
+				     ep_number, toggle_bits, callback);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_setup);
+static int ftdi_elan_edset_input(struct usb_ftdi *ftdi, u8 ed_number,
+				 void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+				 void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+						   int toggle_bits, int error_count, int condition_code, int repeat_number,
+						   int halted, int skipped, int actual, int non_null))
+{
+	u8 ed = ed_number - 1;
+wait:if (ftdi->disconnected > 0) {
+		return -ENODEV;
+	} else if (ftdi->initialized == 0) {
+		return -ENODEV;
+	} else {
+		int command_size;
+		mutex_lock(&ftdi->u132_lock);
+		command_size = ftdi->command_next - ftdi->command_head;
+		if (command_size < COMMAND_SIZE) {
+			struct u132_target *target = &ftdi->target[ed];
+			struct u132_command *command = &ftdi->command[
+				COMMAND_MASK & ftdi->command_next];
+			u32 remaining_length = urb->transfer_buffer_length -
+				urb->actual_length;
+			command->header = 0x82 | (ed << 5);
+			if (remaining_length == 0) {
+				command->length = 0x0000;
+			} else if (remaining_length > 1024) {
+				command->length = 0x8000 | 1023;
+			} else
+				command->length = 0x8000 | (remaining_length -
+							    1);
+			command->address = (toggle_bits << 6) | (ep_number << 2)
+				| (address << 0);
+			command->width = usb_maxpacket(urb->dev, urb->pipe);
+			command->follows = 0;
+			command->value = 0;
+			command->buffer = NULL;
+			target->callback = callback;
+			target->endp = endp;
+			target->urb = urb;
+			target->active = 1;
+			ftdi->command_next += 1;
+			ftdi_elan_kick_command_queue(ftdi);
+			mutex_unlock(&ftdi->u132_lock);
+			return 0;
+		} else {
+			mutex_unlock(&ftdi->u132_lock);
+			msleep(100);
+			goto wait;
+		}
+	}
+}
+
+int usb_ftdi_elan_edset_input(struct platform_device *pdev, u8 ed_number,
+			      void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+			      void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+						int toggle_bits, int error_count, int condition_code, int repeat_number,
+						int halted, int skipped, int actual, int non_null))
+{
+	struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+	return ftdi_elan_edset_input(ftdi, ed_number, endp, urb, address,
+				     ep_number, toggle_bits, callback);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_input);
+static int ftdi_elan_edset_empty(struct usb_ftdi *ftdi, u8 ed_number,
+				 void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+				 void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+						   int toggle_bits, int error_count, int condition_code, int repeat_number,
+						   int halted, int skipped, int actual, int non_null))
+{
+	u8 ed = ed_number - 1;
+wait:if (ftdi->disconnected > 0) {
+		return -ENODEV;
+	} else if (ftdi->initialized == 0) {
+		return -ENODEV;
+	} else {
+		int command_size;
+		mutex_lock(&ftdi->u132_lock);
+		command_size = ftdi->command_next - ftdi->command_head;
+		if (command_size < COMMAND_SIZE) {
+			struct u132_target *target = &ftdi->target[ed];
+			struct u132_command *command = &ftdi->command[
+				COMMAND_MASK & ftdi->command_next];
+			command->header = 0x81 | (ed << 5);
+			command->length = 0x0000;
+			command->address = (toggle_bits << 6) | (ep_number << 2)
+				| (address << 0);
+			command->width = usb_maxpacket(urb->dev, urb->pipe);
+			command->follows = 0;
+			command->value = 0;
+			command->buffer = NULL;
+			target->callback = callback;
+			target->endp = endp;
+			target->urb = urb;
+			target->active = 1;
+			ftdi->command_next += 1;
+			ftdi_elan_kick_command_queue(ftdi);
+			mutex_unlock(&ftdi->u132_lock);
+			return 0;
+		} else {
+			mutex_unlock(&ftdi->u132_lock);
+			msleep(100);
+			goto wait;
+		}
+	}
+}
+
+int usb_ftdi_elan_edset_empty(struct platform_device *pdev, u8 ed_number,
+			      void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+			      void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+						int toggle_bits, int error_count, int condition_code, int repeat_number,
+						int halted, int skipped, int actual, int non_null))
+{
+	struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+	return ftdi_elan_edset_empty(ftdi, ed_number, endp, urb, address,
+				     ep_number, toggle_bits, callback);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_empty);
+static int ftdi_elan_edset_output(struct usb_ftdi *ftdi, u8 ed_number,
+				  void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+				  void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+						    int toggle_bits, int error_count, int condition_code, int repeat_number,
+						    int halted, int skipped, int actual, int non_null))
+{
+	u8 ed = ed_number - 1;
+wait:if (ftdi->disconnected > 0) {
+		return -ENODEV;
+	} else if (ftdi->initialized == 0) {
+		return -ENODEV;
+	} else {
+		int command_size;
+		mutex_lock(&ftdi->u132_lock);
+		command_size = ftdi->command_next - ftdi->command_head;
+		if (command_size < COMMAND_SIZE) {
+			u8 *b;
+			u16 urb_size;
+			int i = 0;
+			char data[30 *3 + 4];
+			char *d = data;
+			int m = (sizeof(data) - 1) / 3 - 1;
+			int l = 0;
+			struct u132_target *target = &ftdi->target[ed];
+			struct u132_command *command = &ftdi->command[
+				COMMAND_MASK & ftdi->command_next];
+			command->header = 0x81 | (ed << 5);
+			command->address = (toggle_bits << 6) | (ep_number << 2)
+				| (address << 0);
+			command->width = usb_maxpacket(urb->dev, urb->pipe);
+			command->follows = min_t(u32, 1024,
+						 urb->transfer_buffer_length -
+						 urb->actual_length);
+			command->value = 0;
+			command->buffer = urb->transfer_buffer +
+				urb->actual_length;
+			command->length = 0x8000 | (command->follows - 1);
+			b = command->buffer;
+			urb_size = command->follows;
+			data[0] = 0;
+			while (urb_size-- > 0) {
+				if (i > m) {
+				} else if (i++ < m) {
+					int w = sprintf(d, " %02X", *b++);
+					d += w;
+					l += w;
+				} else
+					d += sprintf(d, " ..");
+			}
+			target->callback = callback;
+			target->endp = endp;
+			target->urb = urb;
+			target->active = 1;
+			ftdi->command_next += 1;
+			ftdi_elan_kick_command_queue(ftdi);
+			mutex_unlock(&ftdi->u132_lock);
+			return 0;
+		} else {
+			mutex_unlock(&ftdi->u132_lock);
+			msleep(100);
+			goto wait;
+		}
+	}
+}
+
+int usb_ftdi_elan_edset_output(struct platform_device *pdev, u8 ed_number,
+			       void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+			       void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+						 int toggle_bits, int error_count, int condition_code, int repeat_number,
+						 int halted, int skipped, int actual, int non_null))
+{
+	struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+	return ftdi_elan_edset_output(ftdi, ed_number, endp, urb, address,
+				      ep_number, toggle_bits, callback);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_output);
+static int ftdi_elan_edset_single(struct usb_ftdi *ftdi, u8 ed_number,
+				  void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+				  void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+						    int toggle_bits, int error_count, int condition_code, int repeat_number,
+						    int halted, int skipped, int actual, int non_null))
+{
+	u8 ed = ed_number - 1;
+wait:if (ftdi->disconnected > 0) {
+		return -ENODEV;
+	} else if (ftdi->initialized == 0) {
+		return -ENODEV;
+	} else {
+		int command_size;
+		mutex_lock(&ftdi->u132_lock);
+		command_size = ftdi->command_next - ftdi->command_head;
+		if (command_size < COMMAND_SIZE) {
+			u32 remaining_length = urb->transfer_buffer_length -
+				urb->actual_length;
+			struct u132_target *target = &ftdi->target[ed];
+			struct u132_command *command = &ftdi->command[
+				COMMAND_MASK & ftdi->command_next];
+			command->header = 0x83 | (ed << 5);
+			if (remaining_length == 0) {
+				command->length = 0x0000;
+			} else if (remaining_length > 1024) {
+				command->length = 0x8000 | 1023;
+			} else
+				command->length = 0x8000 | (remaining_length -
+							    1);
+			command->address = (toggle_bits << 6) | (ep_number << 2)
+				| (address << 0);
+			command->width = usb_maxpacket(urb->dev, urb->pipe);
+			command->follows = 0;
+			command->value = 0;
+			command->buffer = NULL;
+			target->callback = callback;
+			target->endp = endp;
+			target->urb = urb;
+			target->active = 1;
+			ftdi->command_next += 1;
+			ftdi_elan_kick_command_queue(ftdi);
+			mutex_unlock(&ftdi->u132_lock);
+			return 0;
+		} else {
+			mutex_unlock(&ftdi->u132_lock);
+			msleep(100);
+			goto wait;
+		}
+	}
+}
+
+int usb_ftdi_elan_edset_single(struct platform_device *pdev, u8 ed_number,
+			       void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+			       void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+						 int toggle_bits, int error_count, int condition_code, int repeat_number,
+						 int halted, int skipped, int actual, int non_null))
+{
+	struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+	return ftdi_elan_edset_single(ftdi, ed_number, endp, urb, address,
+				      ep_number, toggle_bits, callback);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_single);
+static int ftdi_elan_edset_flush(struct usb_ftdi *ftdi, u8 ed_number,
+				 void *endp)
+{
+	u8 ed = ed_number - 1;
+	if (ftdi->disconnected > 0) {
+		return -ENODEV;
+	} else if (ftdi->initialized == 0) {
+		return -ENODEV;
+	} else {
+		struct u132_target *target = &ftdi->target[ed];
+		mutex_lock(&ftdi->u132_lock);
+		if (target->abandoning > 0) {
+			mutex_unlock(&ftdi->u132_lock);
+			return 0;
+		} else {
+			target->abandoning = 1;
+		wait_1:if (target->active == 1) {
+				int command_size = ftdi->command_next -
+					ftdi->command_head;
+				if (command_size < COMMAND_SIZE) {
+					struct u132_command *command =
+						&ftdi->command[COMMAND_MASK &
+							       ftdi->command_next];
+					command->header = 0x80 | (ed << 5) |
+						0x4;
+					command->length = 0x00;
+					command->address = 0x00;
+					command->width = 0x00;
+					command->follows = 0;
+					command->value = 0;
+					command->buffer = &command->value;
+					ftdi->command_next += 1;
+					ftdi_elan_kick_command_queue(ftdi);
+				} else {
+					mutex_unlock(&ftdi->u132_lock);
+					msleep(100);
+					mutex_lock(&ftdi->u132_lock);
+					goto wait_1;
+				}
+			}
+			mutex_unlock(&ftdi->u132_lock);
+			return 0;
+		}
+	}
+}
+
+int usb_ftdi_elan_edset_flush(struct platform_device *pdev, u8 ed_number,
+			      void *endp)
+{
+	struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+	return ftdi_elan_edset_flush(ftdi, ed_number, endp);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_flush);
+static int ftdi_elan_flush_input_fifo(struct usb_ftdi *ftdi)
+{
+	int retry_on_empty = 10;
+	int retry_on_timeout = 5;
+	int retry_on_status = 20;
+more:{
+		int packet_bytes = 0;
+		int retval = usb_bulk_msg(ftdi->udev,
+					  usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr),
+					  ftdi->bulk_in_buffer, ftdi->bulk_in_size,
+					  &packet_bytes, 100);
+		if (packet_bytes > 2) {
+			char diag[30 *3 + 4];
+			char *d = diag;
+			int m = (sizeof(diag) - 1) / 3 - 1;
+			char *b = ftdi->bulk_in_buffer;
+			int bytes_read = 0;
+			diag[0] = 0;
+			while (packet_bytes-- > 0) {
+				char c = *b++;
+				if (bytes_read < m) {
+					d += sprintf(d, " %02X",
+						     0x000000FF & c);
+				} else if (bytes_read > m) {
+				} else
+					d += sprintf(d, " ..");
+				bytes_read += 1;
+				continue;
+			}
+			goto more;
+		} else if (packet_bytes > 1) {
+			char s1 = ftdi->bulk_in_buffer[0];
+			char s2 = ftdi->bulk_in_buffer[1];
+			if (s1 == 0x31 && s2 == 0x60) {
+				return 0;
+			} else if (retry_on_status-- > 0) {
+				goto more;
+			} else {
+				dev_err(&ftdi->udev->dev, "STATUS ERROR retry limit reached\n");
+				return -EFAULT;
+			}
+		} else if (packet_bytes > 0) {
+			char b1 = ftdi->bulk_in_buffer[0];
+			dev_err(&ftdi->udev->dev, "only one byte flushed from FTDI = %02X\n",
+				b1);
+			if (retry_on_status-- > 0) {
+				goto more;
+			} else {
+				dev_err(&ftdi->udev->dev, "STATUS ERROR retry limit reached\n");
+				return -EFAULT;
+			}
+		} else if (retval == -ETIMEDOUT) {
+			if (retry_on_timeout-- > 0) {
+				goto more;
+			} else {
+				dev_err(&ftdi->udev->dev, "TIMED OUT retry limit reached\n");
+				return -ENOMEM;
+			}
+		} else if (retval == 0) {
+			if (retry_on_empty-- > 0) {
+				goto more;
+			} else {
+				dev_err(&ftdi->udev->dev, "empty packet retry limit reached\n");
+				return -ENOMEM;
+			}
+		} else {
+			dev_err(&ftdi->udev->dev, "error = %d\n", retval);
+			return retval;
+		}
+	}
+	return -1;
+}
+
+
+/*
+ * send the long flush sequence
+ *
+ */
+static int ftdi_elan_synchronize_flush(struct usb_ftdi *ftdi)
+{
+	int retval;
+	struct urb *urb;
+	char *buf;
+	int I = 257;
+	int i = 0;
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+	buf = usb_alloc_coherent(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma);
+	if (!buf) {
+		dev_err(&ftdi->udev->dev, "could not get a buffer for flush sequence\n");
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+	while (I-- > 0)
+		buf[i++] = 0x55;
+	usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev,
+							   ftdi->bulk_out_endpointAddr), buf, i,
+			  ftdi_elan_write_bulk_callback, ftdi);
+	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	retval = usb_submit_urb(urb, GFP_KERNEL);
+	if (retval) {
+		dev_err(&ftdi->udev->dev, "failed to submit urb containing the flush sequence\n");
+		usb_free_coherent(ftdi->udev, i, buf, urb->transfer_dma);
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+	usb_free_urb(urb);
+	return 0;
+}
+
+
+/*
+ * send the reset sequence
+ *
+ */
+static int ftdi_elan_synchronize_reset(struct usb_ftdi *ftdi)
+{
+	int retval;
+	struct urb *urb;
+	char *buf;
+	int I = 4;
+	int i = 0;
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+	buf = usb_alloc_coherent(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma);
+	if (!buf) {
+		dev_err(&ftdi->udev->dev, "could not get a buffer for the reset sequence\n");
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+	buf[i++] = 0x55;
+	buf[i++] = 0xAA;
+	buf[i++] = 0x5A;
+	buf[i++] = 0xA5;
+	usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev,
+							   ftdi->bulk_out_endpointAddr), buf, i,
+			  ftdi_elan_write_bulk_callback, ftdi);
+	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	retval = usb_submit_urb(urb, GFP_KERNEL);
+	if (retval) {
+		dev_err(&ftdi->udev->dev, "failed to submit urb containing the reset sequence\n");
+		usb_free_coherent(ftdi->udev, i, buf, urb->transfer_dma);
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+	usb_free_urb(urb);
+	return 0;
+}
+
+static int ftdi_elan_synchronize(struct usb_ftdi *ftdi)
+{
+	int retval;
+	int long_stop = 10;
+	int retry_on_timeout = 5;
+	int retry_on_empty = 10;
+	int err_count = 0;
+	retval = ftdi_elan_flush_input_fifo(ftdi);
+	if (retval)
+		return retval;
+	ftdi->bulk_in_left = 0;
+	ftdi->bulk_in_last = -1;
+	while (long_stop-- > 0) {
+		int read_stop;
+		int read_stuck;
+		retval = ftdi_elan_synchronize_flush(ftdi);
+		if (retval)
+			return retval;
+		retval = ftdi_elan_flush_input_fifo(ftdi);
+		if (retval)
+			return retval;
+	reset:retval = ftdi_elan_synchronize_reset(ftdi);
+		if (retval)
+			return retval;
+		read_stop = 100;
+		read_stuck = 10;
+	read:{
+			int packet_bytes = 0;
+			retval = usb_bulk_msg(ftdi->udev,
+					      usb_rcvbulkpipe(ftdi->udev,
+							      ftdi->bulk_in_endpointAddr),
+					      ftdi->bulk_in_buffer, ftdi->bulk_in_size,
+					      &packet_bytes, 500);
+			if (packet_bytes > 2) {
+				char diag[30 *3 + 4];
+				char *d = diag;
+				int m = (sizeof(diag) - 1) / 3 - 1;
+				char *b = ftdi->bulk_in_buffer;
+				int bytes_read = 0;
+				unsigned char c = 0;
+				diag[0] = 0;
+				while (packet_bytes-- > 0) {
+					c = *b++;
+					if (bytes_read < m) {
+						d += sprintf(d, " %02X", c);
+					} else if (bytes_read > m) {
+					} else
+						d += sprintf(d, " ..");
+					bytes_read += 1;
+					continue;
+				}
+				if (c == 0x7E) {
+					return 0;
+				} else {
+					if (c == 0x55) {
+						goto read;
+					} else if (read_stop-- > 0) {
+						goto read;
+					} else {
+						dev_err(&ftdi->udev->dev, "retry limit reached\n");
+						continue;
+					}
+				}
+			} else if (packet_bytes > 1) {
+				unsigned char s1 = ftdi->bulk_in_buffer[0];
+				unsigned char s2 = ftdi->bulk_in_buffer[1];
+				if (s1 == 0x31 && s2 == 0x00) {
+					if (read_stuck-- > 0) {
+						goto read;
+					} else
+						goto reset;
+				} else {
+					if (read_stop-- > 0) {
+						goto read;
+					} else {
+						dev_err(&ftdi->udev->dev, "retry limit reached\n");
+						continue;
+					}
+				}
+			} else if (packet_bytes > 0) {
+				if (read_stop-- > 0) {
+					goto read;
+				} else {
+					dev_err(&ftdi->udev->dev, "retry limit reached\n");
+					continue;
+				}
+			} else if (retval == -ETIMEDOUT) {
+				if (retry_on_timeout-- > 0) {
+					goto read;
+				} else {
+					dev_err(&ftdi->udev->dev, "TIMED OUT retry limit reached\n");
+					continue;
+				}
+			} else if (retval == 0) {
+				if (retry_on_empty-- > 0) {
+					goto read;
+				} else {
+					dev_err(&ftdi->udev->dev, "empty packet retry limit reached\n");
+					continue;
+				}
+			} else {
+				err_count += 1;
+				dev_err(&ftdi->udev->dev, "error = %d\n",
+					retval);
+				if (read_stop-- > 0) {
+					goto read;
+				} else {
+					dev_err(&ftdi->udev->dev, "retry limit reached\n");
+					continue;
+				}
+			}
+		}
+	}
+	dev_err(&ftdi->udev->dev, "failed to synchronize\n");
+	return -EFAULT;
+}
+
+static int ftdi_elan_stuck_waiting(struct usb_ftdi *ftdi)
+{
+	int retry_on_empty = 10;
+	int retry_on_timeout = 5;
+	int retry_on_status = 50;
+more:{
+		int packet_bytes = 0;
+		int retval = usb_bulk_msg(ftdi->udev,
+					  usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr),
+					  ftdi->bulk_in_buffer, ftdi->bulk_in_size,
+					  &packet_bytes, 1000);
+		if (packet_bytes > 2) {
+			char diag[30 *3 + 4];
+			char *d = diag;
+			int m = (sizeof(diag) - 1) / 3 - 1;
+			char *b = ftdi->bulk_in_buffer;
+			int bytes_read = 0;
+			diag[0] = 0;
+			while (packet_bytes-- > 0) {
+				char c = *b++;
+				if (bytes_read < m) {
+					d += sprintf(d, " %02X",
+						     0x000000FF & c);
+				} else if (bytes_read > m) {
+				} else
+					d += sprintf(d, " ..");
+				bytes_read += 1;
+			}
+			goto more;
+		} else if (packet_bytes > 1) {
+			char s1 = ftdi->bulk_in_buffer[0];
+			char s2 = ftdi->bulk_in_buffer[1];
+			if (s1 == 0x31 && s2 == 0x60) {
+				return 0;
+			} else if (retry_on_status-- > 0) {
+				msleep(5);
+				goto more;
+			} else
+				return -EFAULT;
+		} else if (packet_bytes > 0) {
+			char b1 = ftdi->bulk_in_buffer[0];
+			dev_err(&ftdi->udev->dev, "only one byte flushed from FTDI = %02X\n", b1);
+			if (retry_on_status-- > 0) {
+				msleep(5);
+				goto more;
+			} else {
+				dev_err(&ftdi->udev->dev, "STATUS ERROR retry limit reached\n");
+				return -EFAULT;
+			}
+		} else if (retval == -ETIMEDOUT) {
+			if (retry_on_timeout-- > 0) {
+				goto more;
+			} else {
+				dev_err(&ftdi->udev->dev, "TIMED OUT retry limit reached\n");
+				return -ENOMEM;
+			}
+		} else if (retval == 0) {
+			if (retry_on_empty-- > 0) {
+				goto more;
+			} else {
+				dev_err(&ftdi->udev->dev, "empty packet retry limit reached\n");
+				return -ENOMEM;
+			}
+		} else {
+			dev_err(&ftdi->udev->dev, "error = %d\n", retval);
+			return -ENOMEM;
+		}
+	}
+	return -1;
+}
+
+static int ftdi_elan_checkingPCI(struct usb_ftdi *ftdi)
+{
+	int UxxxStatus = ftdi_elan_read_reg(ftdi, &ftdi->controlreg);
+	if (UxxxStatus)
+		return UxxxStatus;
+	if (ftdi->controlreg & 0x00400000) {
+		if (ftdi->card_ejected) {
+		} else {
+			ftdi->card_ejected = 1;
+			dev_err(&ftdi->udev->dev, "CARD EJECTED - controlreg = %08X\n",
+				ftdi->controlreg);
+		}
+		return -ENODEV;
+	} else {
+		u8 fn = ftdi->function - 1;
+		int activePCIfn = fn << 8;
+		u32 pcidata;
+		u32 pciVID;
+		u32 pciPID;
+		int reg = 0;
+		UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+						   &pcidata);
+		if (UxxxStatus)
+			return UxxxStatus;
+		pciVID = pcidata & 0xFFFF;
+		pciPID = (pcidata >> 16) & 0xFFFF;
+		if (pciVID == ftdi->platform_data.vendor && pciPID ==
+		    ftdi->platform_data.device) {
+			return 0;
+		} else {
+			dev_err(&ftdi->udev->dev, "vendor=%04X pciVID=%04X device=%04X pciPID=%04X\n",
+				ftdi->platform_data.vendor, pciVID,
+				ftdi->platform_data.device, pciPID);
+			return -ENODEV;
+		}
+	}
+}
+
+
+#define ftdi_read_pcimem(ftdi, member, data) ftdi_elan_read_pcimem(ftdi, \
+								   offsetof(struct ohci_regs, member), 0, data);
+#define ftdi_write_pcimem(ftdi, member, data) ftdi_elan_write_pcimem(ftdi, \
+								     offsetof(struct ohci_regs, member), 0, data);
+
+#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
+#define OHCI_INTR_INIT (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD |	\
+			OHCI_INTR_WDH)
+static int ftdi_elan_check_controller(struct usb_ftdi *ftdi, int quirk)
+{
+	int devices = 0;
+	int retval;
+	u32 hc_control;
+	int num_ports;
+	u32 control;
+	u32 rh_a = -1;
+	u32 status;
+	u32 fminterval;
+	u32 hc_fminterval;
+	u32 periodicstart;
+	u32 cmdstatus;
+	u32 roothub_a;
+	int mask = OHCI_INTR_INIT;
+	int sleep_time = 0;
+	int reset_timeout = 30;        /* ... allow extra time */
+	int temp;
+	retval = ftdi_write_pcimem(ftdi, intrdisable, OHCI_INTR_MIE);
+	if (retval)
+		return retval;
+	retval = ftdi_read_pcimem(ftdi, control, &control);
+	if (retval)
+		return retval;
+	retval = ftdi_read_pcimem(ftdi, roothub.a, &rh_a);
+	if (retval)
+		return retval;
+	num_ports = rh_a & RH_A_NDP;
+	retval = ftdi_read_pcimem(ftdi, fminterval, &hc_fminterval);
+	if (retval)
+		return retval;
+	hc_fminterval &= 0x3fff;
+	if (hc_fminterval != FI) {
+	}
+	hc_fminterval |= FSMP(hc_fminterval) << 16;
+	retval = ftdi_read_pcimem(ftdi, control, &hc_control);
+	if (retval)
+		return retval;
+	switch (hc_control & OHCI_CTRL_HCFS) {
+	case OHCI_USB_OPER:
+		sleep_time = 0;
+		break;
+	case OHCI_USB_SUSPEND:
+	case OHCI_USB_RESUME:
+		hc_control &= OHCI_CTRL_RWC;
+		hc_control |= OHCI_USB_RESUME;
+		sleep_time = 10;
+		break;
+	default:
+		hc_control &= OHCI_CTRL_RWC;
+		hc_control |= OHCI_USB_RESET;
+		sleep_time = 50;
+		break;
+	}
+	retval = ftdi_write_pcimem(ftdi, control, hc_control);
+	if (retval)
+		return retval;
+	retval = ftdi_read_pcimem(ftdi, control, &control);
+	if (retval)
+		return retval;
+	msleep(sleep_time);
+	retval = ftdi_read_pcimem(ftdi, roothub.a, &roothub_a);
+	if (retval)
+		return retval;
+	if (!(roothub_a & RH_A_NPS)) {        /* power down each port */
+		for (temp = 0; temp < num_ports; temp++) {
+			retval = ftdi_write_pcimem(ftdi,
+						   roothub.portstatus[temp], RH_PS_LSDA);
+			if (retval)
+				return retval;
+		}
+	}
+	retval = ftdi_read_pcimem(ftdi, control, &control);
+	if (retval)
+		return retval;
+retry:retval = ftdi_read_pcimem(ftdi, cmdstatus, &status);
+	if (retval)
+		return retval;
+	retval = ftdi_write_pcimem(ftdi, cmdstatus, OHCI_HCR);
+	if (retval)
+		return retval;
+extra:{
+		retval = ftdi_read_pcimem(ftdi, cmdstatus, &status);
+		if (retval)
+			return retval;
+		if (0 != (status & OHCI_HCR)) {
+			if (--reset_timeout == 0) {
+				dev_err(&ftdi->udev->dev, "USB HC reset timed out!\n");
+				return -ENODEV;
+			} else {
+				msleep(5);
+				goto extra;
+			}
+		}
+	}
+	if (quirk & OHCI_QUIRK_INITRESET) {
+		retval = ftdi_write_pcimem(ftdi, control, hc_control);
+		if (retval)
+			return retval;
+		retval = ftdi_read_pcimem(ftdi, control, &control);
+		if (retval)
+			return retval;
+	}
+	retval = ftdi_write_pcimem(ftdi, ed_controlhead, 0x00000000);
+	if (retval)
+		return retval;
+	retval = ftdi_write_pcimem(ftdi, ed_bulkhead, 0x11000000);
+	if (retval)
+		return retval;
+	retval = ftdi_write_pcimem(ftdi, hcca, 0x00000000);
+	if (retval)
+		return retval;
+	retval = ftdi_read_pcimem(ftdi, fminterval, &fminterval);
+	if (retval)
+		return retval;
+	retval = ftdi_write_pcimem(ftdi, fminterval,
+				   ((fminterval & FIT) ^ FIT) | hc_fminterval);
+	if (retval)
+		return retval;
+	retval = ftdi_write_pcimem(ftdi, periodicstart,
+				   ((9 *hc_fminterval) / 10) & 0x3fff);
+	if (retval)
+		return retval;
+	retval = ftdi_read_pcimem(ftdi, fminterval, &fminterval);
+	if (retval)
+		return retval;
+	retval = ftdi_read_pcimem(ftdi, periodicstart, &periodicstart);
+	if (retval)
+		return retval;
+	if (0 == (fminterval & 0x3fff0000) || 0 == periodicstart) {
+		if (!(quirk & OHCI_QUIRK_INITRESET)) {
+			quirk |= OHCI_QUIRK_INITRESET;
+			goto retry;
+		} else
+			dev_err(&ftdi->udev->dev, "init err(%08x %04x)\n",
+				fminterval, periodicstart);
+	}                        /* start controller operations */
+	hc_control &= OHCI_CTRL_RWC;
+	hc_control |= OHCI_CONTROL_INIT | OHCI_CTRL_BLE | OHCI_USB_OPER;
+	retval = ftdi_write_pcimem(ftdi, control, hc_control);
+	if (retval)
+		return retval;
+	retval = ftdi_write_pcimem(ftdi, cmdstatus, OHCI_BLF);
+	if (retval)
+		return retval;
+	retval = ftdi_read_pcimem(ftdi, cmdstatus, &cmdstatus);
+	if (retval)
+		return retval;
+	retval = ftdi_read_pcimem(ftdi, control, &control);
+	if (retval)
+		return retval;
+	retval = ftdi_write_pcimem(ftdi, roothub.status, RH_HS_DRWE);
+	if (retval)
+		return retval;
+	retval = ftdi_write_pcimem(ftdi, intrstatus, mask);
+	if (retval)
+		return retval;
+	retval = ftdi_write_pcimem(ftdi, intrdisable,
+				   OHCI_INTR_MIE | OHCI_INTR_OC | OHCI_INTR_RHSC | OHCI_INTR_FNO |
+				   OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_SF | OHCI_INTR_WDH |
+				   OHCI_INTR_SO);
+	if (retval)
+		return retval;        /* handle root hub init quirks ... */
+	retval = ftdi_read_pcimem(ftdi, roothub.a, &roothub_a);
+	if (retval)
+		return retval;
+	roothub_a &= ~(RH_A_PSM | RH_A_OCPM);
+	if (quirk & OHCI_QUIRK_SUPERIO) {
+		roothub_a |= RH_A_NOCP;
+		roothub_a &= ~(RH_A_POTPGT | RH_A_NPS);
+		retval = ftdi_write_pcimem(ftdi, roothub.a, roothub_a);
+		if (retval)
+			return retval;
+	} else if ((quirk & OHCI_QUIRK_AMD756) || distrust_firmware) {
+		roothub_a |= RH_A_NPS;
+		retval = ftdi_write_pcimem(ftdi, roothub.a, roothub_a);
+		if (retval)
+			return retval;
+	}
+	retval = ftdi_write_pcimem(ftdi, roothub.status, RH_HS_LPSC);
+	if (retval)
+		return retval;
+	retval = ftdi_write_pcimem(ftdi, roothub.b,
+				   (roothub_a & RH_A_NPS) ? 0 : RH_B_PPCM);
+	if (retval)
+		return retval;
+	retval = ftdi_read_pcimem(ftdi, control, &control);
+	if (retval)
+		return retval;
+	mdelay((roothub_a >> 23) & 0x1fe);
+	for (temp = 0; temp < num_ports; temp++) {
+		u32 portstatus;
+		retval = ftdi_read_pcimem(ftdi, roothub.portstatus[temp],
+					  &portstatus);
+		if (retval)
+			return retval;
+		if (1 & portstatus)
+			devices += 1;
+	}
+	return devices;
+}
+
+static int ftdi_elan_setup_controller(struct usb_ftdi *ftdi, int fn)
+{
+	u32 latence_timer;
+	int UxxxStatus;
+	u32 pcidata;
+	int reg = 0;
+	int activePCIfn = fn << 8;
+	UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x2800);
+	if (UxxxStatus)
+		return UxxxStatus;
+	reg = 16;
+	UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0,
+					    0xFFFFFFFF);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+					   &pcidata);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0,
+					    0xF0000000);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+					   &pcidata);
+	if (UxxxStatus)
+		return UxxxStatus;
+	reg = 12;
+	UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+					   &latence_timer);
+	if (UxxxStatus)
+		return UxxxStatus;
+	latence_timer &= 0xFFFF00FF;
+	latence_timer |= 0x00001600;
+	UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00,
+					    latence_timer);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+					   &pcidata);
+	if (UxxxStatus)
+		return UxxxStatus;
+	reg = 4;
+	UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00,
+					    0x06);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+					   &pcidata);
+	if (UxxxStatus)
+		return UxxxStatus;
+	for (reg = 0; reg <= 0x54; reg += 4) {
+		UxxxStatus = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+		if (UxxxStatus)
+			return UxxxStatus;
+	}
+	return 0;
+}
+
+static int ftdi_elan_close_controller(struct usb_ftdi *ftdi, int fn)
+{
+	u32 latence_timer;
+	int UxxxStatus;
+	u32 pcidata;
+	int reg = 0;
+	int activePCIfn = fn << 8;
+	UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x2800);
+	if (UxxxStatus)
+		return UxxxStatus;
+	reg = 16;
+	UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0,
+					    0xFFFFFFFF);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+					   &pcidata);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0,
+					    0x00000000);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+					   &pcidata);
+	if (UxxxStatus)
+		return UxxxStatus;
+	reg = 12;
+	UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+					   &latence_timer);
+	if (UxxxStatus)
+		return UxxxStatus;
+	latence_timer &= 0xFFFF00FF;
+	latence_timer |= 0x00001600;
+	UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00,
+					    latence_timer);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+					   &pcidata);
+	if (UxxxStatus)
+		return UxxxStatus;
+	reg = 4;
+	UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00,
+					    0x00);
+	if (UxxxStatus)
+		return UxxxStatus;
+	return ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, &pcidata);
+}
+
+static int ftdi_elan_found_controller(struct usb_ftdi *ftdi, int fn, int quirk)
+{
+	int result;
+	int UxxxStatus;
+	UxxxStatus = ftdi_elan_setup_controller(ftdi, fn);
+	if (UxxxStatus)
+		return UxxxStatus;
+	result = ftdi_elan_check_controller(ftdi, quirk);
+	UxxxStatus = ftdi_elan_close_controller(ftdi, fn);
+	if (UxxxStatus)
+		return UxxxStatus;
+	return result;
+}
+
+static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi)
+{
+	u32 controlreg;
+	u8 sensebits;
+	int UxxxStatus;
+	UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000000L);
+	if (UxxxStatus)
+		return UxxxStatus;
+	msleep(750);
+	UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x100);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x500);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020CL | 0x000);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020DL | 0x000);
+	if (UxxxStatus)
+		return UxxxStatus;
+	msleep(250);
+	UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020FL | 0x000);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x800);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+	if (UxxxStatus)
+		return UxxxStatus;
+	UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+	if (UxxxStatus)
+		return UxxxStatus;
+	msleep(1000);
+	sensebits = (controlreg >> 16) & 0x000F;
+	if (0x0D == sensebits)
+		return 0;
+	else
+		return - ENXIO;
+}
+
+static int ftdi_elan_setupOHCI(struct usb_ftdi *ftdi)
+{
+	int UxxxStatus;
+	u32 pcidata;
+	int reg = 0;
+	u8 fn;
+	int activePCIfn = 0;
+	int max_devices = 0;
+	int controllers = 0;
+	int unrecognized = 0;
+	ftdi->function = 0;
+	for (fn = 0; (fn < 4); fn++) {
+		u32 pciVID = 0;
+		u32 pciPID = 0;
+		int devices = 0;
+		activePCIfn = fn << 8;
+		UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+						   &pcidata);
+		if (UxxxStatus)
+			return UxxxStatus;
+		pciVID = pcidata & 0xFFFF;
+		pciPID = (pcidata >> 16) & 0xFFFF;
+		if ((pciVID == PCI_VENDOR_ID_OPTI) && (pciPID == 0xc861)) {
+			devices = ftdi_elan_found_controller(ftdi, fn, 0);
+			controllers += 1;
+		} else if ((pciVID == PCI_VENDOR_ID_NEC) && (pciPID == 0x0035))
+		{
+			devices = ftdi_elan_found_controller(ftdi, fn, 0);
+			controllers += 1;
+		} else if ((pciVID == PCI_VENDOR_ID_AL) && (pciPID == 0x5237)) {
+			devices = ftdi_elan_found_controller(ftdi, fn, 0);
+			controllers += 1;
+		} else if ((pciVID == PCI_VENDOR_ID_ATT) && (pciPID == 0x5802))
+		{
+			devices = ftdi_elan_found_controller(ftdi, fn, 0);
+			controllers += 1;
+		} else if (pciVID == PCI_VENDOR_ID_AMD && pciPID == 0x740c) {
+			devices = ftdi_elan_found_controller(ftdi, fn,
+							     OHCI_QUIRK_AMD756);
+			controllers += 1;
+		} else if (pciVID == PCI_VENDOR_ID_COMPAQ && pciPID == 0xa0f8) {
+			devices = ftdi_elan_found_controller(ftdi, fn,
+							     OHCI_QUIRK_ZFMICRO);
+			controllers += 1;
+		} else if (0 == pcidata) {
+		} else
+			unrecognized += 1;
+		if (devices > max_devices) {
+			max_devices = devices;
+			ftdi->function = fn + 1;
+			ftdi->platform_data.vendor = pciVID;
+			ftdi->platform_data.device = pciPID;
+		}
+	}
+	if (ftdi->function > 0) {
+		return ftdi_elan_setup_controller(ftdi,	ftdi->function - 1);
+	} else if (controllers > 0) {
+		return -ENXIO;
+	} else if (unrecognized > 0) {
+		return -ENXIO;
+	} else {
+		ftdi->enumerated = 0;
+		return -ENXIO;
+	}
+}
+
+
+/*
+ * we use only the first bulk-in and bulk-out endpoints
+ */
+static int ftdi_elan_probe(struct usb_interface *interface,
+			   const struct usb_device_id *id)
+{
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *bulk_in, *bulk_out;
+	int retval;
+	struct usb_ftdi *ftdi;
+
+	ftdi = kzalloc(sizeof(struct usb_ftdi), GFP_KERNEL);
+	if (!ftdi)
+		return -ENOMEM;
+
+	mutex_lock(&ftdi_module_lock);
+	list_add_tail(&ftdi->ftdi_list, &ftdi_static_list);
+	ftdi->sequence_num = ++ftdi_instances;
+	mutex_unlock(&ftdi_module_lock);
+	ftdi_elan_init_kref(ftdi);
+	sema_init(&ftdi->sw_lock, 1);
+	ftdi->udev = usb_get_dev(interface_to_usbdev(interface));
+	ftdi->interface = interface;
+	mutex_init(&ftdi->u132_lock);
+	ftdi->expected = 4;
+
+	iface_desc = interface->cur_altsetting;
+	retval = usb_find_common_endpoints(iface_desc,
+			&bulk_in, &bulk_out, NULL, NULL);
+	if (retval) {
+		dev_err(&ftdi->udev->dev, "Could not find both bulk-in and bulk-out endpoints\n");
+		goto error;
+	}
+
+	ftdi->bulk_in_size = usb_endpoint_maxp(bulk_in);
+	ftdi->bulk_in_endpointAddr = bulk_in->bEndpointAddress;
+	ftdi->bulk_in_buffer = kmalloc(ftdi->bulk_in_size, GFP_KERNEL);
+	if (!ftdi->bulk_in_buffer) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	ftdi->bulk_out_endpointAddr = bulk_out->bEndpointAddress;
+
+	dev_info(&ftdi->udev->dev, "interface %d has I=%02X O=%02X\n",
+		 iface_desc->desc.bInterfaceNumber, ftdi->bulk_in_endpointAddr,
+		 ftdi->bulk_out_endpointAddr);
+	usb_set_intfdata(interface, ftdi);
+	if (iface_desc->desc.bInterfaceNumber == 0 &&
+	    ftdi->bulk_in_endpointAddr == 0x81 &&
+	    ftdi->bulk_out_endpointAddr == 0x02) {
+		retval = usb_register_dev(interface, &ftdi_elan_jtag_class);
+		if (retval) {
+			dev_err(&ftdi->udev->dev, "Not able to get a minor for this device\n");
+			usb_set_intfdata(interface, NULL);
+			retval = -ENOMEM;
+			goto error;
+		} else {
+			ftdi->class = &ftdi_elan_jtag_class;
+			dev_info(&ftdi->udev->dev, "USB FDTI=%p JTAG interface %d now attached to ftdi%d\n",
+				 ftdi, iface_desc->desc.bInterfaceNumber,
+				 interface->minor);
+			return 0;
+		}
+	} else if (iface_desc->desc.bInterfaceNumber == 1 &&
+		   ftdi->bulk_in_endpointAddr == 0x83 &&
+		   ftdi->bulk_out_endpointAddr == 0x04) {
+		ftdi->class = NULL;
+		dev_info(&ftdi->udev->dev, "USB FDTI=%p ELAN interface %d now activated\n",
+			 ftdi, iface_desc->desc.bInterfaceNumber);
+		INIT_DELAYED_WORK(&ftdi->status_work, ftdi_elan_status_work);
+		INIT_DELAYED_WORK(&ftdi->command_work, ftdi_elan_command_work);
+		INIT_DELAYED_WORK(&ftdi->respond_work, ftdi_elan_respond_work);
+		ftdi_status_queue_work(ftdi, msecs_to_jiffies(3 *1000));
+		return 0;
+	} else {
+		dev_err(&ftdi->udev->dev,
+			"Could not find ELAN's U132 device\n");
+		retval = -ENODEV;
+		goto error;
+	}
+error:if (ftdi) {
+		ftdi_elan_put_kref(ftdi);
+	}
+	return retval;
+}
+
+static void ftdi_elan_disconnect(struct usb_interface *interface)
+{
+	struct usb_ftdi *ftdi = usb_get_intfdata(interface);
+	ftdi->disconnected += 1;
+	if (ftdi->class) {
+		int minor = interface->minor;
+		struct usb_class_driver *class = ftdi->class;
+		usb_set_intfdata(interface, NULL);
+		usb_deregister_dev(interface, class);
+		dev_info(&ftdi->udev->dev, "USB FTDI U132 jtag interface on minor %d now disconnected\n",
+			 minor);
+	} else {
+		ftdi_status_cancel_work(ftdi);
+		ftdi_command_cancel_work(ftdi);
+		ftdi_response_cancel_work(ftdi);
+		ftdi_elan_abandon_completions(ftdi);
+		ftdi_elan_abandon_targets(ftdi);
+		if (ftdi->registered) {
+			platform_device_unregister(&ftdi->platform_dev);
+			ftdi->synchronized = 0;
+			ftdi->enumerated = 0;
+			ftdi->initialized = 0;
+			ftdi->registered = 0;
+		}
+		ftdi->disconnected += 1;
+		usb_set_intfdata(interface, NULL);
+		dev_info(&ftdi->udev->dev, "USB FTDI U132 host controller interface now disconnected\n");
+	}
+	ftdi_elan_put_kref(ftdi);
+}
+
+static struct usb_driver ftdi_elan_driver = {
+	.name = "ftdi-elan",
+	.probe = ftdi_elan_probe,
+	.disconnect = ftdi_elan_disconnect,
+	.id_table = ftdi_elan_table,
+};
+static int __init ftdi_elan_init(void)
+{
+	int result;
+	pr_info("driver %s\n", ftdi_elan_driver.name);
+	mutex_init(&ftdi_module_lock);
+	INIT_LIST_HEAD(&ftdi_static_list);
+	result = usb_register(&ftdi_elan_driver);
+	if (result) {
+		pr_err("usb_register failed. Error number %d\n", result);
+	}
+	return result;
+
+}
+
+static void __exit ftdi_elan_exit(void)
+{
+	struct usb_ftdi *ftdi;
+	struct usb_ftdi *temp;
+	usb_deregister(&ftdi_elan_driver);
+	pr_info("ftdi_u132 driver deregistered\n");
+	list_for_each_entry_safe(ftdi, temp, &ftdi_static_list, ftdi_list) {
+		ftdi_status_cancel_work(ftdi);
+		ftdi_command_cancel_work(ftdi);
+		ftdi_response_cancel_work(ftdi);
+	}
+}
+
+
+module_init(ftdi_elan_init);
+module_exit(ftdi_elan_exit);
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
new file mode 100644
index 000000000..ea39243ef
--- /dev/null
+++ b/drivers/usb/misc/idmouse.c
@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Siemens ID Mouse driver v0.6
+
+  Copyright (C) 2004-5 by Florian 'Floe' Echtler  <echtler@fs.tum.de>
+                      and Andreas  'ad'  Deresch <aderesch@fs.tum.de>
+
+  Derived from the USB Skeleton driver 1.1,
+  Copyright (C) 2003 Greg Kroah-Hartman (greg@kroah.com)
+
+  Additional information provided by Martin Reising
+  <Martin.Reising@natural-computing.de>
+
+*/
+
+#include <linux/kernel.h>
+#include <linux/sched/signal.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+
+/* image constants */
+#define WIDTH 225
+#define HEIGHT 289
+#define HEADER "P5 225 289 255 "
+#define IMGSIZE ((WIDTH * HEIGHT) + sizeof(HEADER)-1)
+
+#define DRIVER_SHORT   "idmouse"
+#define DRIVER_AUTHOR  "Florian 'Floe' Echtler <echtler@fs.tum.de>"
+#define DRIVER_DESC    "Siemens ID Mouse FingerTIP Sensor Driver"
+
+/* minor number for misc USB devices */
+#define USB_IDMOUSE_MINOR_BASE 132
+
+/* vendor and device IDs */
+#define ID_SIEMENS 0x0681
+#define ID_IDMOUSE 0x0005
+#define ID_CHERRY  0x0010
+
+/* device ID table */
+static const struct usb_device_id idmouse_table[] = {
+	{USB_DEVICE(ID_SIEMENS, ID_IDMOUSE)}, /* Siemens ID Mouse (Professional) */
+	{USB_DEVICE(ID_SIEMENS, ID_CHERRY )}, /* Cherry FingerTIP ID Board       */
+	{}                                    /* terminating null entry          */
+};
+
+/* sensor commands */
+#define FTIP_RESET   0x20
+#define FTIP_ACQUIRE 0x21
+#define FTIP_RELEASE 0x22
+#define FTIP_BLINK   0x23  /* LSB of value = blink pulse width */
+#define FTIP_SCROLL  0x24
+
+#define ftip_command(dev, command, value, index) \
+	usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), command, \
+	USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, value, index, NULL, 0, 1000)
+
+MODULE_DEVICE_TABLE(usb, idmouse_table);
+
+/* structure to hold all of our device specific stuff */
+struct usb_idmouse {
+
+	struct usb_device *udev; /* save off the usb device pointer */
+	struct usb_interface *interface; /* the interface for this device */
+
+	unsigned char *bulk_in_buffer; /* the buffer to receive data */
+	size_t bulk_in_size; /* the maximum bulk packet size */
+	size_t orig_bi_size; /* same as above, but reported by the device */
+	__u8 bulk_in_endpointAddr; /* the address of the bulk in endpoint */
+
+	int open; /* if the port is open or not */
+	int present; /* if the device is not disconnected */
+	struct mutex lock; /* locks this structure */
+
+};
+
+/* local function prototypes */
+static ssize_t idmouse_read(struct file *file, char __user *buffer,
+				size_t count, loff_t * ppos);
+
+static int idmouse_open(struct inode *inode, struct file *file);
+static int idmouse_release(struct inode *inode, struct file *file);
+
+static int idmouse_probe(struct usb_interface *interface,
+				const struct usb_device_id *id);
+
+static void idmouse_disconnect(struct usb_interface *interface);
+static int idmouse_suspend(struct usb_interface *intf, pm_message_t message);
+static int idmouse_resume(struct usb_interface *intf);
+
+/* file operation pointers */
+static const struct file_operations idmouse_fops = {
+	.owner = THIS_MODULE,
+	.read = idmouse_read,
+	.open = idmouse_open,
+	.release = idmouse_release,
+	.llseek = default_llseek,
+};
+
+/* class driver information */
+static struct usb_class_driver idmouse_class = {
+	.name = "idmouse%d",
+	.fops = &idmouse_fops,
+	.minor_base = USB_IDMOUSE_MINOR_BASE,
+};
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver idmouse_driver = {
+	.name = DRIVER_SHORT,
+	.probe = idmouse_probe,
+	.disconnect = idmouse_disconnect,
+	.suspend = idmouse_suspend,
+	.resume = idmouse_resume,
+	.reset_resume = idmouse_resume,
+	.id_table = idmouse_table,
+	.supports_autosuspend = 1,
+};
+
+static int idmouse_create_image(struct usb_idmouse *dev)
+{
+	int bytes_read;
+	int bulk_read;
+	int result;
+
+	memcpy(dev->bulk_in_buffer, HEADER, sizeof(HEADER)-1);
+	bytes_read = sizeof(HEADER)-1;
+
+	/* reset the device and set a fast blink rate */
+	result = ftip_command(dev, FTIP_RELEASE, 0, 0);
+	if (result < 0)
+		goto reset;
+	result = ftip_command(dev, FTIP_BLINK,   1, 0);
+	if (result < 0)
+		goto reset;
+
+	/* initialize the sensor - sending this command twice */
+	/* significantly reduces the rate of failed reads     */
+	result = ftip_command(dev, FTIP_ACQUIRE, 0, 0);
+	if (result < 0)
+		goto reset;
+	result = ftip_command(dev, FTIP_ACQUIRE, 0, 0);
+	if (result < 0)
+		goto reset;
+
+	/* start the readout - sending this command twice */
+	/* presumably enables the high dynamic range mode */
+	result = ftip_command(dev, FTIP_RESET,   0, 0);
+	if (result < 0)
+		goto reset;
+	result = ftip_command(dev, FTIP_RESET,   0, 0);
+	if (result < 0)
+		goto reset;
+
+	/* loop over a blocking bulk read to get data from the device */
+	while (bytes_read < IMGSIZE) {
+		result = usb_bulk_msg(dev->udev,
+				usb_rcvbulkpipe(dev->udev, dev->bulk_in_endpointAddr),
+				dev->bulk_in_buffer + bytes_read,
+				dev->bulk_in_size, &bulk_read, 5000);
+		if (result < 0) {
+			/* Maybe this error was caused by the increased packet size? */
+			/* Reset to the original value and tell userspace to retry.  */
+			if (dev->bulk_in_size != dev->orig_bi_size) {
+				dev->bulk_in_size = dev->orig_bi_size;
+				result = -EAGAIN;
+			}
+			break;
+		}
+		if (signal_pending(current)) {
+			result = -EINTR;
+			break;
+		}
+		bytes_read += bulk_read;
+	}
+
+	/* check for valid image */
+	/* right border should be black (0x00) */
+	for (bytes_read = sizeof(HEADER)-1 + WIDTH-1; bytes_read < IMGSIZE; bytes_read += WIDTH)
+		if (dev->bulk_in_buffer[bytes_read] != 0x00)
+			return -EAGAIN;
+
+	/* lower border should be white (0xFF) */
+	for (bytes_read = IMGSIZE-WIDTH; bytes_read < IMGSIZE-1; bytes_read++)
+		if (dev->bulk_in_buffer[bytes_read] != 0xFF)
+			return -EAGAIN;
+
+	/* reset the device */
+reset:
+	ftip_command(dev, FTIP_RELEASE, 0, 0);
+
+	/* should be IMGSIZE == 65040 */
+	dev_dbg(&dev->interface->dev, "read %d bytes fingerprint data\n",
+		bytes_read);
+	return result;
+}
+
+/* PM operations are nops as this driver does IO only during open() */
+static int idmouse_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	return 0;
+}
+
+static int idmouse_resume(struct usb_interface *intf)
+{
+	return 0;
+}
+
+static inline void idmouse_delete(struct usb_idmouse *dev)
+{
+	kfree(dev->bulk_in_buffer);
+	kfree(dev);
+}
+
+static int idmouse_open(struct inode *inode, struct file *file)
+{
+	struct usb_idmouse *dev;
+	struct usb_interface *interface;
+	int result;
+
+	/* get the interface from minor number and driver information */
+	interface = usb_find_interface(&idmouse_driver, iminor(inode));
+	if (!interface)
+		return -ENODEV;
+
+	/* get the device information block from the interface */
+	dev = usb_get_intfdata(interface);
+	if (!dev)
+		return -ENODEV;
+
+	/* lock this device */
+	mutex_lock(&dev->lock);
+
+	/* check if already open */
+	if (dev->open) {
+
+		/* already open, so fail */
+		result = -EBUSY;
+
+	} else {
+
+		/* create a new image and check for success */
+		result = usb_autopm_get_interface(interface);
+		if (result)
+			goto error;
+		result = idmouse_create_image(dev);
+		usb_autopm_put_interface(interface);
+		if (result)
+			goto error;
+
+		/* increment our usage count for the driver */
+		++dev->open;
+
+		/* save our object in the file's private structure */
+		file->private_data = dev;
+
+	} 
+
+error:
+
+	/* unlock this device */
+	mutex_unlock(&dev->lock);
+	return result;
+}
+
+static int idmouse_release(struct inode *inode, struct file *file)
+{
+	struct usb_idmouse *dev;
+
+	dev = file->private_data;
+
+	if (dev == NULL)
+		return -ENODEV;
+
+	/* lock our device */
+	mutex_lock(&dev->lock);
+
+	--dev->open;
+
+	if (!dev->present) {
+		/* the device was unplugged before the file was released */
+		mutex_unlock(&dev->lock);
+		idmouse_delete(dev);
+	} else {
+		mutex_unlock(&dev->lock);
+	}
+	return 0;
+}
+
+static ssize_t idmouse_read(struct file *file, char __user *buffer, size_t count,
+				loff_t * ppos)
+{
+	struct usb_idmouse *dev = file->private_data;
+	int result;
+
+	/* lock this object */
+	mutex_lock(&dev->lock);
+
+	/* verify that the device wasn't unplugged */
+	if (!dev->present) {
+		mutex_unlock(&dev->lock);
+		return -ENODEV;
+	}
+
+	result = simple_read_from_buffer(buffer, count, ppos,
+					dev->bulk_in_buffer, IMGSIZE);
+	/* unlock the device */
+	mutex_unlock(&dev->lock);
+	return result;
+}
+
+static int idmouse_probe(struct usb_interface *interface,
+				const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_idmouse *dev;
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	int result;
+
+	/* check if we have gotten the data or the hid interface */
+	iface_desc = interface->cur_altsetting;
+	if (iface_desc->desc.bInterfaceClass != 0x0A)
+		return -ENODEV;
+
+	if (iface_desc->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL)
+		return -ENOMEM;
+
+	mutex_init(&dev->lock);
+	dev->udev = udev;
+	dev->interface = interface;
+
+	/* set up the endpoint information - use only the first bulk-in endpoint */
+	result = usb_find_bulk_in_endpoint(iface_desc, &endpoint);
+	if (result) {
+		dev_err(&interface->dev, "Unable to find bulk-in endpoint.\n");
+		idmouse_delete(dev);
+		return result;
+	}
+
+	dev->orig_bi_size = usb_endpoint_maxp(endpoint);
+	dev->bulk_in_size = 0x200; /* works _much_ faster */
+	dev->bulk_in_endpointAddr = endpoint->bEndpointAddress;
+	dev->bulk_in_buffer = kmalloc(IMGSIZE + dev->bulk_in_size, GFP_KERNEL);
+	if (!dev->bulk_in_buffer) {
+		idmouse_delete(dev);
+		return -ENOMEM;
+	}
+
+	/* allow device read, write and ioctl */
+	dev->present = 1;
+
+	/* we can register the device now, as it is ready */
+	usb_set_intfdata(interface, dev);
+	result = usb_register_dev(interface, &idmouse_class);
+	if (result) {
+		/* something prevented us from registering this device */
+		dev_err(&interface->dev, "Unable to allocate minor number.\n");
+		idmouse_delete(dev);
+		return result;
+	}
+
+	/* be noisy */
+	dev_info(&interface->dev,"%s now attached\n",DRIVER_DESC);
+
+	return 0;
+}
+
+static void idmouse_disconnect(struct usb_interface *interface)
+{
+	struct usb_idmouse *dev = usb_get_intfdata(interface);
+
+	/* give back our minor */
+	usb_deregister_dev(interface, &idmouse_class);
+
+	/* lock the device */
+	mutex_lock(&dev->lock);
+
+	/* prevent device read, write and ioctl */
+	dev->present = 0;
+
+	/* if the device is opened, idmouse_release will clean this up */
+	if (!dev->open) {
+		mutex_unlock(&dev->lock);
+		idmouse_delete(dev);
+	} else {
+		/* unlock */
+		mutex_unlock(&dev->lock);
+	}
+
+	dev_info(&interface->dev, "disconnected\n");
+}
+
+module_usb_driver(idmouse_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
new file mode 100644
index 000000000..b421f1326
--- /dev/null
+++ b/drivers/usb/misc/iowarrior.c
@@ -0,0 +1,926 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Native support for the I/O-Warrior USB devices
+ *
+ *  Copyright (c) 2003-2005, 2020  Code Mercenaries GmbH
+ *  written by Christian Lucht <lucht@codemercs.com> and
+ *  Christoph Jung <jung@codemercs.com>
+ *
+ *  based on
+
+ *  usb-skeleton.c by Greg Kroah-Hartman  <greg@kroah.com>
+ *  brlvger.c by Stephane Dalton  <sdalton@videotron.ca>
+ *           and Stephane Doyon   <s.doyon@videotron.ca>
+ *
+ *  Released under the GPLv2.
+ */
+
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/mutex.h>
+#include <linux/poll.h>
+#include <linux/usb/iowarrior.h>
+
+#define DRIVER_AUTHOR "Christian Lucht <lucht@codemercs.com>"
+#define DRIVER_DESC "USB IO-Warrior driver"
+
+#define USB_VENDOR_ID_CODEMERCS		1984
+/* low speed iowarrior */
+#define USB_DEVICE_ID_CODEMERCS_IOW40	0x1500
+#define USB_DEVICE_ID_CODEMERCS_IOW24	0x1501
+#define USB_DEVICE_ID_CODEMERCS_IOWPV1	0x1511
+#define USB_DEVICE_ID_CODEMERCS_IOWPV2	0x1512
+/* full speed iowarrior */
+#define USB_DEVICE_ID_CODEMERCS_IOW56	0x1503
+/* fuller speed iowarrior */
+#define USB_DEVICE_ID_CODEMERCS_IOW28	0x1504
+#define USB_DEVICE_ID_CODEMERCS_IOW28L	0x1505
+#define USB_DEVICE_ID_CODEMERCS_IOW100	0x1506
+
+/* OEMed devices */
+#define USB_DEVICE_ID_CODEMERCS_IOW24SAG	0x158a
+#define USB_DEVICE_ID_CODEMERCS_IOW56AM		0x158b
+
+/* Get a minor range for your devices from the usb maintainer */
+#ifdef CONFIG_USB_DYNAMIC_MINORS
+#define IOWARRIOR_MINOR_BASE	0
+#else
+#define IOWARRIOR_MINOR_BASE	208	// SKELETON_MINOR_BASE 192 + 16, not official yet
+#endif
+
+/* interrupt input queue size */
+#define MAX_INTERRUPT_BUFFER 16
+/*
+   maximum number of urbs that are submitted for writes at the same time,
+   this applies to the IOWarrior56 only!
+   IOWarrior24 and IOWarrior40 use synchronous usb_control_msg calls.
+*/
+#define MAX_WRITES_IN_FLIGHT 4
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static struct usb_driver iowarrior_driver;
+
+/*--------------*/
+/*     data     */
+/*--------------*/
+
+/* Structure to hold all of our device specific stuff */
+struct iowarrior {
+	struct mutex mutex;			/* locks this structure */
+	struct usb_device *udev;		/* save off the usb device pointer */
+	struct usb_interface *interface;	/* the interface for this device */
+	unsigned char minor;			/* the starting minor number for this device */
+	struct usb_endpoint_descriptor *int_out_endpoint;	/* endpoint for reading (needed for IOW56 only) */
+	struct usb_endpoint_descriptor *int_in_endpoint;	/* endpoint for reading */
+	struct urb *int_in_urb;		/* the urb for reading data */
+	unsigned char *int_in_buffer;	/* buffer for data to be read */
+	unsigned char serial_number;	/* to detect lost packages */
+	unsigned char *read_queue;	/* size is MAX_INTERRUPT_BUFFER * packet size */
+	wait_queue_head_t read_wait;
+	wait_queue_head_t write_wait;	/* wait-queue for writing to the device */
+	atomic_t write_busy;		/* number of write-urbs submitted */
+	atomic_t read_idx;
+	atomic_t intr_idx;
+	atomic_t overflow_flag;		/* signals an index 'rollover' */
+	int present;			/* this is 1 as long as the device is connected */
+	int opened;			/* this is 1 if the device is currently open */
+	char chip_serial[9];		/* the serial number string of the chip connected */
+	int report_size;		/* number of bytes in a report */
+	u16 product_id;
+	struct usb_anchor submitted;
+};
+
+/*--------------*/
+/*    globals   */
+/*--------------*/
+
+#define USB_REQ_GET_REPORT  0x01
+//#if 0
+static int usb_get_report(struct usb_device *dev,
+			  struct usb_host_interface *inter, unsigned char type,
+			  unsigned char id, void *buf, int size)
+{
+	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			       USB_REQ_GET_REPORT,
+			       USB_DIR_IN | USB_TYPE_CLASS |
+			       USB_RECIP_INTERFACE, (type << 8) + id,
+			       inter->desc.bInterfaceNumber, buf, size,
+			       USB_CTRL_GET_TIMEOUT);
+}
+//#endif
+
+#define USB_REQ_SET_REPORT 0x09
+
+static int usb_set_report(struct usb_interface *intf, unsigned char type,
+			  unsigned char id, void *buf, int size)
+{
+	return usb_control_msg(interface_to_usbdev(intf),
+			       usb_sndctrlpipe(interface_to_usbdev(intf), 0),
+			       USB_REQ_SET_REPORT,
+			       USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			       (type << 8) + id,
+			       intf->cur_altsetting->desc.bInterfaceNumber, buf,
+			       size, 1000);
+}
+
+/*---------------------*/
+/* driver registration */
+/*---------------------*/
+/* table of devices that work with this driver */
+static const struct usb_device_id iowarrior_ids[] = {
+	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40)},
+	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24)},
+	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV1)},
+	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV2)},
+	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56)},
+	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24SAG)},
+	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56AM)},
+	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28)},
+	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28L)},
+	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW100)},
+	{}			/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, iowarrior_ids);
+
+/*
+ * USB callback handler for reading data
+ */
+static void iowarrior_callback(struct urb *urb)
+{
+	struct iowarrior *dev = urb->context;
+	int intr_idx;
+	int read_idx;
+	int aux_idx;
+	int offset;
+	int status = urb->status;
+	int retval;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+	default:
+		goto exit;
+	}
+
+	intr_idx = atomic_read(&dev->intr_idx);
+	/* aux_idx become previous intr_idx */
+	aux_idx = (intr_idx == 0) ? (MAX_INTERRUPT_BUFFER - 1) : (intr_idx - 1);
+	read_idx = atomic_read(&dev->read_idx);
+
+	/* queue is not empty and it's interface 0 */
+	if ((intr_idx != read_idx)
+	    && (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0)) {
+		/* + 1 for serial number */
+		offset = aux_idx * (dev->report_size + 1);
+		if (!memcmp
+		    (dev->read_queue + offset, urb->transfer_buffer,
+		     dev->report_size)) {
+			/* equal values on interface 0 will be ignored */
+			goto exit;
+		}
+	}
+
+	/* aux_idx become next intr_idx */
+	aux_idx = (intr_idx == (MAX_INTERRUPT_BUFFER - 1)) ? 0 : (intr_idx + 1);
+	if (read_idx == aux_idx) {
+		/* queue full, dropping oldest input */
+		read_idx = (++read_idx == MAX_INTERRUPT_BUFFER) ? 0 : read_idx;
+		atomic_set(&dev->read_idx, read_idx);
+		atomic_set(&dev->overflow_flag, 1);
+	}
+
+	/* +1 for serial number */
+	offset = intr_idx * (dev->report_size + 1);
+	memcpy(dev->read_queue + offset, urb->transfer_buffer,
+	       dev->report_size);
+	*(dev->read_queue + offset + (dev->report_size)) = dev->serial_number++;
+
+	atomic_set(&dev->intr_idx, aux_idx);
+	/* tell the blocking read about the new data */
+	wake_up_interruptible(&dev->read_wait);
+
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&dev->interface->dev, "%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
+
+}
+
+/*
+ * USB Callback handler for write-ops
+ */
+static void iowarrior_write_callback(struct urb *urb)
+{
+	struct iowarrior *dev;
+	int status = urb->status;
+
+	dev = urb->context;
+	/* sync/async unlink faults aren't errors */
+	if (status &&
+	    !(status == -ENOENT ||
+	      status == -ECONNRESET || status == -ESHUTDOWN)) {
+		dev_dbg(&dev->interface->dev,
+			"nonzero write bulk status received: %d\n", status);
+	}
+	/* free up our allocated buffer */
+	usb_free_coherent(urb->dev, urb->transfer_buffer_length,
+			  urb->transfer_buffer, urb->transfer_dma);
+	/* tell a waiting writer the interrupt-out-pipe is available again */
+	atomic_dec(&dev->write_busy);
+	wake_up_interruptible(&dev->write_wait);
+}
+
+/*
+ *	iowarrior_delete
+ */
+static inline void iowarrior_delete(struct iowarrior *dev)
+{
+	dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor);
+	kfree(dev->int_in_buffer);
+	usb_free_urb(dev->int_in_urb);
+	kfree(dev->read_queue);
+	usb_put_intf(dev->interface);
+	kfree(dev);
+}
+
+/*---------------------*/
+/* fops implementation */
+/*---------------------*/
+
+static int read_index(struct iowarrior *dev)
+{
+	int intr_idx, read_idx;
+
+	read_idx = atomic_read(&dev->read_idx);
+	intr_idx = atomic_read(&dev->intr_idx);
+
+	return (read_idx == intr_idx ? -1 : read_idx);
+}
+
+/*
+ *  iowarrior_read
+ */
+static ssize_t iowarrior_read(struct file *file, char __user *buffer,
+			      size_t count, loff_t *ppos)
+{
+	struct iowarrior *dev;
+	int read_idx;
+	int offset;
+
+	dev = file->private_data;
+
+	/* verify that the device wasn't unplugged */
+	if (!dev || !dev->present)
+		return -ENODEV;
+
+	dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n",
+		dev->minor, count);
+
+	/* read count must be packet size (+ time stamp) */
+	if ((count != dev->report_size)
+	    && (count != (dev->report_size + 1)))
+		return -EINVAL;
+
+	/* repeat until no buffer overrun in callback handler occur */
+	do {
+		atomic_set(&dev->overflow_flag, 0);
+		if ((read_idx = read_index(dev)) == -1) {
+			/* queue empty */
+			if (file->f_flags & O_NONBLOCK)
+				return -EAGAIN;
+			else {
+				//next line will return when there is either new data, or the device is unplugged
+				int r = wait_event_interruptible(dev->read_wait,
+								 (!dev->present
+								  || (read_idx =
+								      read_index
+								      (dev)) !=
+								  -1));
+				if (r) {
+					//we were interrupted by a signal
+					return -ERESTART;
+				}
+				if (!dev->present) {
+					//The device was unplugged
+					return -ENODEV;
+				}
+				if (read_idx == -1) {
+					// Can this happen ???
+					return 0;
+				}
+			}
+		}
+
+		offset = read_idx * (dev->report_size + 1);
+		if (copy_to_user(buffer, dev->read_queue + offset, count)) {
+			return -EFAULT;
+		}
+	} while (atomic_read(&dev->overflow_flag));
+
+	read_idx = ++read_idx == MAX_INTERRUPT_BUFFER ? 0 : read_idx;
+	atomic_set(&dev->read_idx, read_idx);
+	return count;
+}
+
+/*
+ * iowarrior_write
+ */
+static ssize_t iowarrior_write(struct file *file,
+			       const char __user *user_buffer,
+			       size_t count, loff_t *ppos)
+{
+	struct iowarrior *dev;
+	int retval = 0;
+	char *buf = NULL;	/* for IOW24 and IOW56 we need a buffer */
+	struct urb *int_out_urb = NULL;
+
+	dev = file->private_data;
+
+	mutex_lock(&dev->mutex);
+	/* verify that the device wasn't unplugged */
+	if (!dev->present) {
+		retval = -ENODEV;
+		goto exit;
+	}
+	dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n",
+		dev->minor, count);
+	/* if count is 0 we're already done */
+	if (count == 0) {
+		retval = 0;
+		goto exit;
+	}
+	/* We only accept full reports */
+	if (count != dev->report_size) {
+		retval = -EINVAL;
+		goto exit;
+	}
+	switch (dev->product_id) {
+	case USB_DEVICE_ID_CODEMERCS_IOW24:
+	case USB_DEVICE_ID_CODEMERCS_IOW24SAG:
+	case USB_DEVICE_ID_CODEMERCS_IOWPV1:
+	case USB_DEVICE_ID_CODEMERCS_IOWPV2:
+	case USB_DEVICE_ID_CODEMERCS_IOW40:
+		/* IOW24 and IOW40 use a synchronous call */
+		buf = memdup_user(user_buffer, count);
+		if (IS_ERR(buf)) {
+			retval = PTR_ERR(buf);
+			goto exit;
+		}
+		retval = usb_set_report(dev->interface, 2, 0, buf, count);
+		kfree(buf);
+		goto exit;
+	case USB_DEVICE_ID_CODEMERCS_IOW56:
+	case USB_DEVICE_ID_CODEMERCS_IOW56AM:
+	case USB_DEVICE_ID_CODEMERCS_IOW28:
+	case USB_DEVICE_ID_CODEMERCS_IOW28L:
+	case USB_DEVICE_ID_CODEMERCS_IOW100:
+		/* The IOW56 uses asynchronous IO and more urbs */
+		if (atomic_read(&dev->write_busy) == MAX_WRITES_IN_FLIGHT) {
+			/* Wait until we are below the limit for submitted urbs */
+			if (file->f_flags & O_NONBLOCK) {
+				retval = -EAGAIN;
+				goto exit;
+			} else {
+				retval = wait_event_interruptible(dev->write_wait,
+								  (!dev->present || (atomic_read (&dev-> write_busy) < MAX_WRITES_IN_FLIGHT)));
+				if (retval) {
+					/* we were interrupted by a signal */
+					retval = -ERESTART;
+					goto exit;
+				}
+				if (!dev->present) {
+					/* The device was unplugged */
+					retval = -ENODEV;
+					goto exit;
+				}
+				if (!dev->opened) {
+					/* We were closed while waiting for an URB */
+					retval = -ENODEV;
+					goto exit;
+				}
+			}
+		}
+		atomic_inc(&dev->write_busy);
+		int_out_urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!int_out_urb) {
+			retval = -ENOMEM;
+			goto error_no_urb;
+		}
+		buf = usb_alloc_coherent(dev->udev, dev->report_size,
+					 GFP_KERNEL, &int_out_urb->transfer_dma);
+		if (!buf) {
+			retval = -ENOMEM;
+			dev_dbg(&dev->interface->dev,
+				"Unable to allocate buffer\n");
+			goto error_no_buffer;
+		}
+		usb_fill_int_urb(int_out_urb, dev->udev,
+				 usb_sndintpipe(dev->udev,
+						dev->int_out_endpoint->bEndpointAddress),
+				 buf, dev->report_size,
+				 iowarrior_write_callback, dev,
+				 dev->int_out_endpoint->bInterval);
+		int_out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+		if (copy_from_user(buf, user_buffer, count)) {
+			retval = -EFAULT;
+			goto error;
+		}
+		usb_anchor_urb(int_out_urb, &dev->submitted);
+		retval = usb_submit_urb(int_out_urb, GFP_KERNEL);
+		if (retval) {
+			dev_dbg(&dev->interface->dev,
+				"submit error %d for urb nr.%d\n",
+				retval, atomic_read(&dev->write_busy));
+			usb_unanchor_urb(int_out_urb);
+			goto error;
+		}
+		/* submit was ok */
+		retval = count;
+		usb_free_urb(int_out_urb);
+		goto exit;
+	default:
+		/* what do we have here ? An unsupported Product-ID ? */
+		dev_err(&dev->interface->dev, "%s - not supported for product=0x%x\n",
+			__func__, dev->product_id);
+		retval = -EFAULT;
+		goto exit;
+	}
+error:
+	usb_free_coherent(dev->udev, dev->report_size, buf,
+			  int_out_urb->transfer_dma);
+error_no_buffer:
+	usb_free_urb(int_out_urb);
+error_no_urb:
+	atomic_dec(&dev->write_busy);
+	wake_up_interruptible(&dev->write_wait);
+exit:
+	mutex_unlock(&dev->mutex);
+	return retval;
+}
+
+/*
+ *	iowarrior_ioctl
+ */
+static long iowarrior_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	struct iowarrior *dev = NULL;
+	__u8 *buffer;
+	__u8 __user *user_buffer;
+	int retval;
+	int io_res;		/* checks for bytes read/written and copy_to/from_user results */
+
+	dev = file->private_data;
+	if (!dev)
+		return -ENODEV;
+
+	buffer = kzalloc(dev->report_size, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	mutex_lock(&dev->mutex);
+
+	/* verify that the device wasn't unplugged */
+	if (!dev->present) {
+		retval = -ENODEV;
+		goto error_out;
+	}
+
+	dev_dbg(&dev->interface->dev, "minor %d, cmd 0x%.4x, arg %ld\n",
+		dev->minor, cmd, arg);
+
+	retval = 0;
+	io_res = 0;
+	switch (cmd) {
+	case IOW_WRITE:
+		if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW24 ||
+		    dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW24SAG ||
+		    dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV1 ||
+		    dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV2 ||
+		    dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW40) {
+			user_buffer = (__u8 __user *)arg;
+			io_res = copy_from_user(buffer, user_buffer,
+						dev->report_size);
+			if (io_res) {
+				retval = -EFAULT;
+			} else {
+				io_res = usb_set_report(dev->interface, 2, 0,
+							buffer,
+							dev->report_size);
+				if (io_res < 0)
+					retval = io_res;
+			}
+		} else {
+			retval = -EINVAL;
+			dev_err(&dev->interface->dev,
+				"ioctl 'IOW_WRITE' is not supported for product=0x%x.\n",
+				dev->product_id);
+		}
+		break;
+	case IOW_READ:
+		user_buffer = (__u8 __user *)arg;
+		io_res = usb_get_report(dev->udev,
+					dev->interface->cur_altsetting, 1, 0,
+					buffer, dev->report_size);
+		if (io_res < 0)
+			retval = io_res;
+		else {
+			io_res = copy_to_user(user_buffer, buffer, dev->report_size);
+			if (io_res)
+				retval = -EFAULT;
+		}
+		break;
+	case IOW_GETINFO:
+		{
+			/* Report available information for the device */
+			struct iowarrior_info info;
+			/* needed for power consumption */
+			struct usb_config_descriptor *cfg_descriptor = &dev->udev->actconfig->desc;
+
+			memset(&info, 0, sizeof(info));
+			/* directly from the descriptor */
+			info.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+			info.product = dev->product_id;
+			info.revision = le16_to_cpu(dev->udev->descriptor.bcdDevice);
+
+			/* 0==UNKNOWN, 1==LOW(usb1.1) ,2=FULL(usb1.1), 3=HIGH(usb2.0) */
+			info.speed = dev->udev->speed;
+			info.if_num = dev->interface->cur_altsetting->desc.bInterfaceNumber;
+			info.report_size = dev->report_size;
+
+			/* serial number string has been read earlier 8 chars or empty string */
+			memcpy(info.serial, dev->chip_serial,
+			       sizeof(dev->chip_serial));
+			if (cfg_descriptor == NULL) {
+				info.power = -1;	/* no information available */
+			} else {
+				/* the MaxPower is stored in units of 2mA to make it fit into a byte-value */
+				info.power = cfg_descriptor->bMaxPower * 2;
+			}
+			io_res = copy_to_user((struct iowarrior_info __user *)arg, &info,
+					 sizeof(struct iowarrior_info));
+			if (io_res)
+				retval = -EFAULT;
+			break;
+		}
+	default:
+		/* return that we did not understand this ioctl call */
+		retval = -ENOTTY;
+		break;
+	}
+error_out:
+	/* unlock the device */
+	mutex_unlock(&dev->mutex);
+	kfree(buffer);
+	return retval;
+}
+
+/*
+ *	iowarrior_open
+ */
+static int iowarrior_open(struct inode *inode, struct file *file)
+{
+	struct iowarrior *dev = NULL;
+	struct usb_interface *interface;
+	int subminor;
+	int retval = 0;
+
+	subminor = iminor(inode);
+
+	interface = usb_find_interface(&iowarrior_driver, subminor);
+	if (!interface) {
+		pr_err("%s - error, can't find device for minor %d\n",
+		       __func__, subminor);
+		return -ENODEV;
+	}
+
+	dev = usb_get_intfdata(interface);
+	if (!dev)
+		return -ENODEV;
+
+	mutex_lock(&dev->mutex);
+
+	/* Only one process can open each device, no sharing. */
+	if (dev->opened) {
+		retval = -EBUSY;
+		goto out;
+	}
+
+	/* setup interrupt handler for receiving values */
+	if ((retval = usb_submit_urb(dev->int_in_urb, GFP_KERNEL)) < 0) {
+		dev_err(&interface->dev, "Error %d while submitting URB\n", retval);
+		retval = -EFAULT;
+		goto out;
+	}
+	/* increment our usage count for the driver */
+	++dev->opened;
+	/* save our object in the file's private structure */
+	file->private_data = dev;
+	retval = 0;
+
+out:
+	mutex_unlock(&dev->mutex);
+	return retval;
+}
+
+/*
+ *	iowarrior_release
+ */
+static int iowarrior_release(struct inode *inode, struct file *file)
+{
+	struct iowarrior *dev;
+	int retval = 0;
+
+	dev = file->private_data;
+	if (!dev)
+		return -ENODEV;
+
+	dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor);
+
+	/* lock our device */
+	mutex_lock(&dev->mutex);
+
+	if (dev->opened <= 0) {
+		retval = -ENODEV;	/* close called more than once */
+		mutex_unlock(&dev->mutex);
+	} else {
+		dev->opened = 0;	/* we're closing now */
+		retval = 0;
+		if (dev->present) {
+			/*
+			   The device is still connected so we only shutdown
+			   pending read-/write-ops.
+			 */
+			usb_kill_urb(dev->int_in_urb);
+			wake_up_interruptible(&dev->read_wait);
+			wake_up_interruptible(&dev->write_wait);
+			mutex_unlock(&dev->mutex);
+		} else {
+			/* The device was unplugged, cleanup resources */
+			mutex_unlock(&dev->mutex);
+			iowarrior_delete(dev);
+		}
+	}
+	return retval;
+}
+
+static __poll_t iowarrior_poll(struct file *file, poll_table * wait)
+{
+	struct iowarrior *dev = file->private_data;
+	__poll_t mask = 0;
+
+	if (!dev->present)
+		return EPOLLERR | EPOLLHUP;
+
+	poll_wait(file, &dev->read_wait, wait);
+	poll_wait(file, &dev->write_wait, wait);
+
+	if (!dev->present)
+		return EPOLLERR | EPOLLHUP;
+
+	if (read_index(dev) != -1)
+		mask |= EPOLLIN | EPOLLRDNORM;
+
+	if (atomic_read(&dev->write_busy) < MAX_WRITES_IN_FLIGHT)
+		mask |= EPOLLOUT | EPOLLWRNORM;
+	return mask;
+}
+
+/*
+ * File operations needed when we register this driver.
+ * This assumes that this driver NEEDS file operations,
+ * of course, which means that the driver is expected
+ * to have a node in the /dev directory. If the USB
+ * device were for a network interface then the driver
+ * would use "struct net_driver" instead, and a serial
+ * device would use "struct tty_driver".
+ */
+static const struct file_operations iowarrior_fops = {
+	.owner = THIS_MODULE,
+	.write = iowarrior_write,
+	.read = iowarrior_read,
+	.unlocked_ioctl = iowarrior_ioctl,
+	.open = iowarrior_open,
+	.release = iowarrior_release,
+	.poll = iowarrior_poll,
+	.llseek = noop_llseek,
+};
+
+static char *iowarrior_devnode(struct device *dev, umode_t *mode)
+{
+	return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
+}
+
+/*
+ * usb class driver info in order to get a minor number from the usb core,
+ * and to have the device registered with devfs and the driver core
+ */
+static struct usb_class_driver iowarrior_class = {
+	.name = "iowarrior%d",
+	.devnode = iowarrior_devnode,
+	.fops = &iowarrior_fops,
+	.minor_base = IOWARRIOR_MINOR_BASE,
+};
+
+/*---------------------------------*/
+/*  probe and disconnect functions */
+/*---------------------------------*/
+/*
+ *	iowarrior_probe
+ *
+ *	Called by the usb core when a new device is connected that it thinks
+ *	this driver might be interested in.
+ */
+static int iowarrior_probe(struct usb_interface *interface,
+			   const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct iowarrior *dev = NULL;
+	struct usb_host_interface *iface_desc;
+	int retval = -ENOMEM;
+	int res;
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
+	if (!dev)
+		return retval;
+
+	mutex_init(&dev->mutex);
+
+	atomic_set(&dev->intr_idx, 0);
+	atomic_set(&dev->read_idx, 0);
+	atomic_set(&dev->overflow_flag, 0);
+	init_waitqueue_head(&dev->read_wait);
+	atomic_set(&dev->write_busy, 0);
+	init_waitqueue_head(&dev->write_wait);
+
+	dev->udev = udev;
+	dev->interface = usb_get_intf(interface);
+
+	iface_desc = interface->cur_altsetting;
+	dev->product_id = le16_to_cpu(udev->descriptor.idProduct);
+
+	init_usb_anchor(&dev->submitted);
+
+	res = usb_find_last_int_in_endpoint(iface_desc, &dev->int_in_endpoint);
+	if (res) {
+		dev_err(&interface->dev, "no interrupt-in endpoint found\n");
+		retval = res;
+		goto error;
+	}
+
+	if ((dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) ||
+	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM) ||
+	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28) ||
+	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28L) ||
+	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW100)) {
+		res = usb_find_last_int_out_endpoint(iface_desc,
+				&dev->int_out_endpoint);
+		if (res) {
+			dev_err(&interface->dev, "no interrupt-out endpoint found\n");
+			retval = res;
+			goto error;
+		}
+	}
+
+	/* we have to check the report_size often, so remember it in the endianness suitable for our machine */
+	dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
+
+	/*
+	 * Some devices need the report size to be different than the
+	 * endpoint size.
+	 */
+	if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) {
+		switch (dev->product_id) {
+		case USB_DEVICE_ID_CODEMERCS_IOW56:
+		case USB_DEVICE_ID_CODEMERCS_IOW56AM:
+			dev->report_size = 7;
+			break;
+
+		case USB_DEVICE_ID_CODEMERCS_IOW28:
+		case USB_DEVICE_ID_CODEMERCS_IOW28L:
+			dev->report_size = 4;
+			break;
+
+		case USB_DEVICE_ID_CODEMERCS_IOW100:
+			dev->report_size = 12;
+			break;
+		}
+	}
+
+	/* create the urb and buffer for reading */
+	dev->int_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->int_in_urb)
+		goto error;
+	dev->int_in_buffer = kmalloc(dev->report_size, GFP_KERNEL);
+	if (!dev->int_in_buffer)
+		goto error;
+	usb_fill_int_urb(dev->int_in_urb, dev->udev,
+			 usb_rcvintpipe(dev->udev,
+					dev->int_in_endpoint->bEndpointAddress),
+			 dev->int_in_buffer, dev->report_size,
+			 iowarrior_callback, dev,
+			 dev->int_in_endpoint->bInterval);
+	/* create an internal buffer for interrupt data from the device */
+	dev->read_queue =
+	    kmalloc_array(dev->report_size + 1, MAX_INTERRUPT_BUFFER,
+			  GFP_KERNEL);
+	if (!dev->read_queue)
+		goto error;
+	/* Get the serial-number of the chip */
+	memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
+	usb_string(udev, udev->descriptor.iSerialNumber, dev->chip_serial,
+		   sizeof(dev->chip_serial));
+	if (strlen(dev->chip_serial) != 8)
+		memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
+
+	/* Set the idle timeout to 0, if this is interface 0 */
+	if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) {
+	    usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			    0x0A,
+			    USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
+			    0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+	}
+	/* allow device read and ioctl */
+	dev->present = 1;
+
+	/* we can register the device now, as it is ready */
+	usb_set_intfdata(interface, dev);
+
+	retval = usb_register_dev(interface, &iowarrior_class);
+	if (retval) {
+		/* something prevented us from registering this driver */
+		dev_err(&interface->dev, "Not able to get a minor for this device.\n");
+		goto error;
+	}
+
+	dev->minor = interface->minor;
+
+	/* let the user know what node this device is now attached to */
+	dev_info(&interface->dev, "IOWarrior product=0x%x, serial=%s interface=%d "
+		 "now attached to iowarrior%d\n", dev->product_id, dev->chip_serial,
+		 iface_desc->desc.bInterfaceNumber, dev->minor - IOWARRIOR_MINOR_BASE);
+	return retval;
+
+error:
+	iowarrior_delete(dev);
+	return retval;
+}
+
+/*
+ *	iowarrior_disconnect
+ *
+ *	Called by the usb core when the device is removed from the system.
+ */
+static void iowarrior_disconnect(struct usb_interface *interface)
+{
+	struct iowarrior *dev = usb_get_intfdata(interface);
+	int minor = dev->minor;
+
+	usb_deregister_dev(interface, &iowarrior_class);
+
+	mutex_lock(&dev->mutex);
+
+	/* prevent device read, write and ioctl */
+	dev->present = 0;
+
+	if (dev->opened) {
+		/* There is a process that holds a filedescriptor to the device ,
+		   so we only shutdown read-/write-ops going on.
+		   Deleting the device is postponed until close() was called.
+		 */
+		usb_kill_urb(dev->int_in_urb);
+		usb_kill_anchored_urbs(&dev->submitted);
+		wake_up_interruptible(&dev->read_wait);
+		wake_up_interruptible(&dev->write_wait);
+		mutex_unlock(&dev->mutex);
+	} else {
+		/* no process is using the device, cleanup now */
+		mutex_unlock(&dev->mutex);
+		iowarrior_delete(dev);
+	}
+
+	dev_info(&interface->dev, "I/O-Warror #%d now disconnected\n",
+		 minor - IOWARRIOR_MINOR_BASE);
+}
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver iowarrior_driver = {
+	.name = "iowarrior",
+	.probe = iowarrior_probe,
+	.disconnect = iowarrior_disconnect,
+	.id_table = iowarrior_ids,
+};
+
+module_usb_driver(iowarrior_driver);
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
new file mode 100644
index 000000000..4d30095d6
--- /dev/null
+++ b/drivers/usb/misc/isight_firmware.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for loading USB isight firmware
+ *
+ * Copyright (C) 2008 Matthew Garrett <mjg@redhat.com>
+ *
+ * The USB isight cameras in recent Apples are roughly compatible with the USB
+ * video class specification, and can be driven by uvcvideo. However, they
+ * need firmware to be loaded beforehand. After firmware loading, the device
+ * detaches from the USB bus and reattaches with a new device ID. It can then
+ * be claimed by the uvc driver.
+ *
+ * The firmware is non-free and must be extracted by the user. Tools to do this
+ * are available at http://bersace03.free.fr/ift/
+ *
+ * The isight firmware loading was reverse engineered by Johannes Berg
+ * <johannes@sipsolutions.de>, and this driver is based on code by Ronald
+ * Bultje <rbultje@ronald.bitfreak.net>
+ */
+
+#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+static const struct usb_device_id id_table[] = {
+	{USB_DEVICE(0x05ac, 0x8300)},
+	{},
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static int isight_firmware_load(struct usb_interface *intf,
+				const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	int llen, len, req, ret = 0;
+	const struct firmware *firmware;
+	unsigned char *buf = kmalloc(50, GFP_KERNEL);
+	unsigned char data[4];
+	const u8 *ptr;
+
+	if (!buf)
+		return -ENOMEM;
+
+	if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) {
+		printk(KERN_ERR "Unable to load isight firmware\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	ptr = firmware->data;
+
+	buf[0] = 0x01;
+	if (usb_control_msg
+	    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1,
+	     300) != 1) {
+		printk(KERN_ERR
+		       "Failed to initialise isight firmware loader\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	while (ptr+4 <= firmware->data+firmware->size) {
+		memcpy(data, ptr, 4);
+		len = (data[0] << 8 | data[1]);
+		req = (data[2] << 8 | data[3]);
+		ptr += 4;
+
+		if (len == 0x8001)
+			break;	/* success */
+		else if (len == 0)
+			continue;
+
+		for (; len > 0; req += 50) {
+			llen = min(len, 50);
+			len -= llen;
+			if (ptr+llen > firmware->data+firmware->size) {
+				printk(KERN_ERR
+				       "Malformed isight firmware");
+				ret = -ENODEV;
+				goto out;
+			}
+			memcpy(buf, ptr, llen);
+
+			ptr += llen;
+
+			if (usb_control_msg
+			    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, req, 0,
+			     buf, llen, 300) != llen) {
+				printk(KERN_ERR
+				       "Failed to load isight firmware\n");
+				ret = -ENODEV;
+				goto out;
+			}
+
+		}
+	}
+
+	buf[0] = 0x00;
+	if (usb_control_msg
+	    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1,
+	     300) != 1) {
+		printk(KERN_ERR "isight firmware loading completion failed\n");
+		ret = -ENODEV;
+	}
+
+out:
+	kfree(buf);
+	release_firmware(firmware);
+	return ret;
+}
+
+MODULE_FIRMWARE("isight.fw");
+
+static void isight_firmware_disconnect(struct usb_interface *intf)
+{
+}
+
+static struct usb_driver isight_firmware_driver = {
+	.name = "isight_firmware",
+	.probe = isight_firmware_load,
+	.disconnect = isight_firmware_disconnect,
+	.id_table = id_table,
+};
+
+module_usb_driver(isight_firmware_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
new file mode 100644
index 000000000..7cbef74df
--- /dev/null
+++ b/drivers/usb/misc/ldusb.c
@@ -0,0 +1,797 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Generic USB driver for report based interrupt in/out devices
+ * like LD Didactic's USB devices. LD Didactic's USB devices are
+ * HID devices which do not use HID report definitons (they use
+ * raw interrupt in and our reports only for communication).
+ *
+ * This driver uses a ring buffer for time critical reading of
+ * interrupt in reports and provides read and write methods for
+ * raw interrupt reports (similar to the Windows HID driver).
+ * Devices based on the book USB COMPLETE by Jan Axelson may need
+ * such a compatibility to the Windows HID driver.
+ *
+ * Copyright (C) 2005 Michael Hund <mhund@ld-didactic.de>
+ *
+ * Derived from Lego USB Tower driver
+ * Copyright (C) 2003 David Glance <advidgsf@sourceforge.net>
+ *		 2001-2004 Juergen Stuber <starblue@users.sourceforge.net>
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+
+#include <linux/uaccess.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/poll.h>
+
+/* Define these values to match your devices */
+#define USB_VENDOR_ID_LD		0x0f11	/* USB Vendor ID of LD Didactic GmbH */
+#define USB_DEVICE_ID_LD_CASSY		0x1000	/* USB Product ID of CASSY-S modules with 8 bytes endpoint size */
+#define USB_DEVICE_ID_LD_CASSY2		0x1001	/* USB Product ID of CASSY-S modules with 64 bytes endpoint size */
+#define USB_DEVICE_ID_LD_POCKETCASSY	0x1010	/* USB Product ID of Pocket-CASSY */
+#define USB_DEVICE_ID_LD_POCKETCASSY2	0x1011	/* USB Product ID of Pocket-CASSY 2 (reserved) */
+#define USB_DEVICE_ID_LD_MOBILECASSY	0x1020	/* USB Product ID of Mobile-CASSY */
+#define USB_DEVICE_ID_LD_MOBILECASSY2	0x1021	/* USB Product ID of Mobile-CASSY 2 (reserved) */
+#define USB_DEVICE_ID_LD_MICROCASSYVOLTAGE	0x1031	/* USB Product ID of Micro-CASSY Voltage */
+#define USB_DEVICE_ID_LD_MICROCASSYCURRENT	0x1032	/* USB Product ID of Micro-CASSY Current */
+#define USB_DEVICE_ID_LD_MICROCASSYTIME		0x1033	/* USB Product ID of Micro-CASSY Time (reserved) */
+#define USB_DEVICE_ID_LD_MICROCASSYTEMPERATURE	0x1035	/* USB Product ID of Micro-CASSY Temperature */
+#define USB_DEVICE_ID_LD_MICROCASSYPH		0x1038	/* USB Product ID of Micro-CASSY pH */
+#define USB_DEVICE_ID_LD_POWERANALYSERCASSY	0x1040	/* USB Product ID of Power Analyser CASSY */
+#define USB_DEVICE_ID_LD_CONVERTERCONTROLLERCASSY	0x1042	/* USB Product ID of Converter Controller CASSY */
+#define USB_DEVICE_ID_LD_MACHINETESTCASSY	0x1043	/* USB Product ID of Machine Test CASSY */
+#define USB_DEVICE_ID_LD_JWM		0x1080	/* USB Product ID of Joule and Wattmeter */
+#define USB_DEVICE_ID_LD_DMMP		0x1081	/* USB Product ID of Digital Multimeter P (reserved) */
+#define USB_DEVICE_ID_LD_UMIP		0x1090	/* USB Product ID of UMI P */
+#define USB_DEVICE_ID_LD_UMIC		0x10A0	/* USB Product ID of UMI C */
+#define USB_DEVICE_ID_LD_UMIB		0x10B0	/* USB Product ID of UMI B */
+#define USB_DEVICE_ID_LD_XRAY		0x1100	/* USB Product ID of X-Ray Apparatus 55481 */
+#define USB_DEVICE_ID_LD_XRAY2		0x1101	/* USB Product ID of X-Ray Apparatus 554800 */
+#define USB_DEVICE_ID_LD_XRAYCT		0x1110	/* USB Product ID of X-Ray Apparatus CT 554821*/
+#define USB_DEVICE_ID_LD_VIDEOCOM	0x1200	/* USB Product ID of VideoCom */
+#define USB_DEVICE_ID_LD_MOTOR		0x1210	/* USB Product ID of Motor (reserved) */
+#define USB_DEVICE_ID_LD_COM3LAB	0x2000	/* USB Product ID of COM3LAB */
+#define USB_DEVICE_ID_LD_TELEPORT	0x2010	/* USB Product ID of Terminal Adapter */
+#define USB_DEVICE_ID_LD_NETWORKANALYSER 0x2020	/* USB Product ID of Network Analyser */
+#define USB_DEVICE_ID_LD_POWERCONTROL	0x2030	/* USB Product ID of Converter Control Unit */
+#define USB_DEVICE_ID_LD_MACHINETEST	0x2040	/* USB Product ID of Machine Test System */
+#define USB_DEVICE_ID_LD_MOSTANALYSER	0x2050	/* USB Product ID of MOST Protocol Analyser */
+#define USB_DEVICE_ID_LD_MOSTANALYSER2	0x2051	/* USB Product ID of MOST Protocol Analyser 2 */
+#define USB_DEVICE_ID_LD_ABSESP		0x2060	/* USB Product ID of ABS ESP */
+#define USB_DEVICE_ID_LD_AUTODATABUS	0x2070	/* USB Product ID of Automotive Data Buses */
+#define USB_DEVICE_ID_LD_MCT		0x2080	/* USB Product ID of Microcontroller technique */
+#define USB_DEVICE_ID_LD_HYBRID		0x2090	/* USB Product ID of Automotive Hybrid */
+#define USB_DEVICE_ID_LD_HEATCONTROL	0x20A0	/* USB Product ID of Heat control */
+
+#ifdef CONFIG_USB_DYNAMIC_MINORS
+#define USB_LD_MINOR_BASE	0
+#else
+#define USB_LD_MINOR_BASE	176
+#endif
+
+/* table of devices that work with this driver */
+static const struct usb_device_id ld_usb_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY2) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY2) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY2) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYVOLTAGE) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYCURRENT) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYTIME) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYTEMPERATURE) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYPH) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERANALYSERCASSY) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CONVERTERCONTROLLERCASSY) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETESTCASSY) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIC) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIB) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY2) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_VIDEOCOM) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOTOR) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_COM3LAB) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_TELEPORT) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOSTANALYSER) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOSTANALYSER2) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_ABSESP) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_AUTODATABUS) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MCT) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) },
+	{ }					/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, ld_usb_table);
+MODULE_AUTHOR("Michael Hund <mhund@ld-didactic.de>");
+MODULE_DESCRIPTION("LD USB Driver");
+MODULE_LICENSE("GPL");
+
+/* All interrupt in transfers are collected in a ring buffer to
+ * avoid racing conditions and get better performance of the driver.
+ */
+static int ring_buffer_size = 128;
+module_param(ring_buffer_size, int, 0000);
+MODULE_PARM_DESC(ring_buffer_size, "Read ring buffer size in reports");
+
+/* The write_buffer can contain more than one interrupt out transfer.
+ */
+static int write_buffer_size = 10;
+module_param(write_buffer_size, int, 0000);
+MODULE_PARM_DESC(write_buffer_size, "Write buffer size in reports");
+
+/* As of kernel version 2.6.4 ehci-hcd uses an
+ * "only one interrupt transfer per frame" shortcut
+ * to simplify the scheduling of periodic transfers.
+ * This conflicts with our standard 1ms intervals for in and out URBs.
+ * We use default intervals of 2ms for in and 2ms for out transfers,
+ * which should be fast enough.
+ * Increase the interval to allow more devices that do interrupt transfers,
+ * or set to 1 to use the standard interval from the endpoint descriptors.
+ */
+static int min_interrupt_in_interval = 2;
+module_param(min_interrupt_in_interval, int, 0000);
+MODULE_PARM_DESC(min_interrupt_in_interval, "Minimum interrupt in interval in ms");
+
+static int min_interrupt_out_interval = 2;
+module_param(min_interrupt_out_interval, int, 0000);
+MODULE_PARM_DESC(min_interrupt_out_interval, "Minimum interrupt out interval in ms");
+
+/* Structure to hold all of our device specific stuff */
+struct ld_usb {
+	struct mutex		mutex;		/* locks this structure */
+	struct usb_interface	*intf;		/* save off the usb interface pointer */
+	unsigned long		disconnected:1;
+
+	int			open_count;	/* number of times this port has been opened */
+
+	char			*ring_buffer;
+	unsigned int		ring_head;
+	unsigned int		ring_tail;
+
+	wait_queue_head_t	read_wait;
+	wait_queue_head_t	write_wait;
+
+	char			*interrupt_in_buffer;
+	struct usb_endpoint_descriptor *interrupt_in_endpoint;
+	struct urb		*interrupt_in_urb;
+	int			interrupt_in_interval;
+	size_t			interrupt_in_endpoint_size;
+	int			interrupt_in_running;
+	int			interrupt_in_done;
+	int			buffer_overflow;
+	spinlock_t		rbsl;
+
+	char			*interrupt_out_buffer;
+	struct usb_endpoint_descriptor *interrupt_out_endpoint;
+	struct urb		*interrupt_out_urb;
+	int			interrupt_out_interval;
+	size_t			interrupt_out_endpoint_size;
+	int			interrupt_out_busy;
+};
+
+static struct usb_driver ld_usb_driver;
+
+/*
+ *	ld_usb_abort_transfers
+ *      aborts transfers and frees associated data structures
+ */
+static void ld_usb_abort_transfers(struct ld_usb *dev)
+{
+	/* shutdown transfer */
+	if (dev->interrupt_in_running) {
+		dev->interrupt_in_running = 0;
+		usb_kill_urb(dev->interrupt_in_urb);
+	}
+	if (dev->interrupt_out_busy)
+		usb_kill_urb(dev->interrupt_out_urb);
+}
+
+/*
+ *	ld_usb_delete
+ */
+static void ld_usb_delete(struct ld_usb *dev)
+{
+	/* free data structures */
+	usb_free_urb(dev->interrupt_in_urb);
+	usb_free_urb(dev->interrupt_out_urb);
+	kfree(dev->ring_buffer);
+	kfree(dev->interrupt_in_buffer);
+	kfree(dev->interrupt_out_buffer);
+	kfree(dev);
+}
+
+/*
+ *	ld_usb_interrupt_in_callback
+ */
+static void ld_usb_interrupt_in_callback(struct urb *urb)
+{
+	struct ld_usb *dev = urb->context;
+	size_t *actual_buffer;
+	unsigned int next_ring_head;
+	int status = urb->status;
+	unsigned long flags;
+	int retval;
+
+	if (status) {
+		if (status == -ENOENT ||
+		    status == -ECONNRESET ||
+		    status == -ESHUTDOWN) {
+			goto exit;
+		} else {
+			dev_dbg(&dev->intf->dev,
+				"%s: nonzero status received: %d\n", __func__,
+				status);
+			spin_lock_irqsave(&dev->rbsl, flags);
+			goto resubmit; /* maybe we can recover */
+		}
+	}
+
+	spin_lock_irqsave(&dev->rbsl, flags);
+	if (urb->actual_length > 0) {
+		next_ring_head = (dev->ring_head+1) % ring_buffer_size;
+		if (next_ring_head != dev->ring_tail) {
+			actual_buffer = (size_t *)(dev->ring_buffer + dev->ring_head * (sizeof(size_t)+dev->interrupt_in_endpoint_size));
+			/* actual_buffer gets urb->actual_length + interrupt_in_buffer */
+			*actual_buffer = urb->actual_length;
+			memcpy(actual_buffer+1, dev->interrupt_in_buffer, urb->actual_length);
+			dev->ring_head = next_ring_head;
+			dev_dbg(&dev->intf->dev, "%s: received %d bytes\n",
+				__func__, urb->actual_length);
+		} else {
+			dev_warn(&dev->intf->dev,
+				 "Ring buffer overflow, %d bytes dropped\n",
+				 urb->actual_length);
+			dev->buffer_overflow = 1;
+		}
+	}
+
+resubmit:
+	/* resubmit if we're still running */
+	if (dev->interrupt_in_running && !dev->buffer_overflow) {
+		retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC);
+		if (retval) {
+			dev_err(&dev->intf->dev,
+				"usb_submit_urb failed (%d)\n", retval);
+			dev->buffer_overflow = 1;
+		}
+	}
+	spin_unlock_irqrestore(&dev->rbsl, flags);
+exit:
+	dev->interrupt_in_done = 1;
+	wake_up_interruptible(&dev->read_wait);
+}
+
+/*
+ *	ld_usb_interrupt_out_callback
+ */
+static void ld_usb_interrupt_out_callback(struct urb *urb)
+{
+	struct ld_usb *dev = urb->context;
+	int status = urb->status;
+
+	/* sync/async unlink faults aren't errors */
+	if (status && !(status == -ENOENT ||
+			status == -ECONNRESET ||
+			status == -ESHUTDOWN))
+		dev_dbg(&dev->intf->dev,
+			"%s - nonzero write interrupt status received: %d\n",
+			__func__, status);
+
+	dev->interrupt_out_busy = 0;
+	wake_up_interruptible(&dev->write_wait);
+}
+
+/*
+ *	ld_usb_open
+ */
+static int ld_usb_open(struct inode *inode, struct file *file)
+{
+	struct ld_usb *dev;
+	int subminor;
+	int retval;
+	struct usb_interface *interface;
+
+	stream_open(inode, file);
+	subminor = iminor(inode);
+
+	interface = usb_find_interface(&ld_usb_driver, subminor);
+
+	if (!interface) {
+		printk(KERN_ERR "%s - error, can't find device for minor %d\n",
+		       __func__, subminor);
+		return -ENODEV;
+	}
+
+	dev = usb_get_intfdata(interface);
+
+	if (!dev)
+		return -ENODEV;
+
+	/* lock this device */
+	if (mutex_lock_interruptible(&dev->mutex))
+		return -ERESTARTSYS;
+
+	/* allow opening only once */
+	if (dev->open_count) {
+		retval = -EBUSY;
+		goto unlock_exit;
+	}
+	dev->open_count = 1;
+
+	/* initialize in direction */
+	dev->ring_head = 0;
+	dev->ring_tail = 0;
+	dev->buffer_overflow = 0;
+	usb_fill_int_urb(dev->interrupt_in_urb,
+			 interface_to_usbdev(interface),
+			 usb_rcvintpipe(interface_to_usbdev(interface),
+					dev->interrupt_in_endpoint->bEndpointAddress),
+			 dev->interrupt_in_buffer,
+			 dev->interrupt_in_endpoint_size,
+			 ld_usb_interrupt_in_callback,
+			 dev,
+			 dev->interrupt_in_interval);
+
+	dev->interrupt_in_running = 1;
+	dev->interrupt_in_done = 0;
+
+	retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+	if (retval) {
+		dev_err(&interface->dev, "Couldn't submit interrupt_in_urb %d\n", retval);
+		dev->interrupt_in_running = 0;
+		dev->open_count = 0;
+		goto unlock_exit;
+	}
+
+	/* save device in the file's private structure */
+	file->private_data = dev;
+
+unlock_exit:
+	mutex_unlock(&dev->mutex);
+
+	return retval;
+}
+
+/*
+ *	ld_usb_release
+ */
+static int ld_usb_release(struct inode *inode, struct file *file)
+{
+	struct ld_usb *dev;
+	int retval = 0;
+
+	dev = file->private_data;
+
+	if (dev == NULL) {
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	mutex_lock(&dev->mutex);
+
+	if (dev->open_count != 1) {
+		retval = -ENODEV;
+		goto unlock_exit;
+	}
+	if (dev->disconnected) {
+		/* the device was unplugged before the file was released */
+		mutex_unlock(&dev->mutex);
+		/* unlock here as ld_usb_delete frees dev */
+		ld_usb_delete(dev);
+		goto exit;
+	}
+
+	/* wait until write transfer is finished */
+	if (dev->interrupt_out_busy)
+		wait_event_interruptible_timeout(dev->write_wait, !dev->interrupt_out_busy, 2 * HZ);
+	ld_usb_abort_transfers(dev);
+	dev->open_count = 0;
+
+unlock_exit:
+	mutex_unlock(&dev->mutex);
+
+exit:
+	return retval;
+}
+
+/*
+ *	ld_usb_poll
+ */
+static __poll_t ld_usb_poll(struct file *file, poll_table *wait)
+{
+	struct ld_usb *dev;
+	__poll_t mask = 0;
+
+	dev = file->private_data;
+
+	if (dev->disconnected)
+		return EPOLLERR | EPOLLHUP;
+
+	poll_wait(file, &dev->read_wait, wait);
+	poll_wait(file, &dev->write_wait, wait);
+
+	if (dev->ring_head != dev->ring_tail)
+		mask |= EPOLLIN | EPOLLRDNORM;
+	if (!dev->interrupt_out_busy)
+		mask |= EPOLLOUT | EPOLLWRNORM;
+
+	return mask;
+}
+
+/*
+ *	ld_usb_read
+ */
+static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count,
+			   loff_t *ppos)
+{
+	struct ld_usb *dev;
+	size_t *actual_buffer;
+	size_t bytes_to_read;
+	int retval = 0;
+	int rv;
+
+	dev = file->private_data;
+
+	/* verify that we actually have some data to read */
+	if (count == 0)
+		goto exit;
+
+	/* lock this object */
+	if (mutex_lock_interruptible(&dev->mutex)) {
+		retval = -ERESTARTSYS;
+		goto exit;
+	}
+
+	/* verify that the device wasn't unplugged */
+	if (dev->disconnected) {
+		retval = -ENODEV;
+		printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
+		goto unlock_exit;
+	}
+
+	/* wait for data */
+	spin_lock_irq(&dev->rbsl);
+	while (dev->ring_head == dev->ring_tail) {
+		dev->interrupt_in_done = 0;
+		spin_unlock_irq(&dev->rbsl);
+		if (file->f_flags & O_NONBLOCK) {
+			retval = -EAGAIN;
+			goto unlock_exit;
+		}
+		retval = wait_event_interruptible(dev->read_wait, dev->interrupt_in_done);
+		if (retval < 0)
+			goto unlock_exit;
+
+		spin_lock_irq(&dev->rbsl);
+	}
+	spin_unlock_irq(&dev->rbsl);
+
+	/* actual_buffer contains actual_length + interrupt_in_buffer */
+	actual_buffer = (size_t *)(dev->ring_buffer + dev->ring_tail * (sizeof(size_t)+dev->interrupt_in_endpoint_size));
+	if (*actual_buffer > dev->interrupt_in_endpoint_size) {
+		retval = -EIO;
+		goto unlock_exit;
+	}
+	bytes_to_read = min(count, *actual_buffer);
+	if (bytes_to_read < *actual_buffer)
+		dev_warn(&dev->intf->dev, "Read buffer overflow, %zu bytes dropped\n",
+			 *actual_buffer-bytes_to_read);
+
+	/* copy one interrupt_in_buffer from ring_buffer into userspace */
+	if (copy_to_user(buffer, actual_buffer+1, bytes_to_read)) {
+		retval = -EFAULT;
+		goto unlock_exit;
+	}
+	retval = bytes_to_read;
+
+	spin_lock_irq(&dev->rbsl);
+	dev->ring_tail = (dev->ring_tail + 1) % ring_buffer_size;
+
+	if (dev->buffer_overflow) {
+		dev->buffer_overflow = 0;
+		spin_unlock_irq(&dev->rbsl);
+		rv = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+		if (rv < 0)
+			dev->buffer_overflow = 1;
+	} else {
+		spin_unlock_irq(&dev->rbsl);
+	}
+
+unlock_exit:
+	/* unlock the device */
+	mutex_unlock(&dev->mutex);
+
+exit:
+	return retval;
+}
+
+/*
+ *	ld_usb_write
+ */
+static ssize_t ld_usb_write(struct file *file, const char __user *buffer,
+			    size_t count, loff_t *ppos)
+{
+	struct ld_usb *dev;
+	size_t bytes_to_write;
+	int retval = 0;
+
+	dev = file->private_data;
+
+	/* verify that we actually have some data to write */
+	if (count == 0)
+		goto exit;
+
+	/* lock this object */
+	if (mutex_lock_interruptible(&dev->mutex)) {
+		retval = -ERESTARTSYS;
+		goto exit;
+	}
+
+	/* verify that the device wasn't unplugged */
+	if (dev->disconnected) {
+		retval = -ENODEV;
+		printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
+		goto unlock_exit;
+	}
+
+	/* wait until previous transfer is finished */
+	if (dev->interrupt_out_busy) {
+		if (file->f_flags & O_NONBLOCK) {
+			retval = -EAGAIN;
+			goto unlock_exit;
+		}
+		retval = wait_event_interruptible(dev->write_wait, !dev->interrupt_out_busy);
+		if (retval < 0) {
+			goto unlock_exit;
+		}
+	}
+
+	/* write the data into interrupt_out_buffer from userspace */
+	bytes_to_write = min(count, write_buffer_size*dev->interrupt_out_endpoint_size);
+	if (bytes_to_write < count)
+		dev_warn(&dev->intf->dev, "Write buffer overflow, %zu bytes dropped\n",
+			count - bytes_to_write);
+	dev_dbg(&dev->intf->dev, "%s: count = %zu, bytes_to_write = %zu\n",
+		__func__, count, bytes_to_write);
+
+	if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write)) {
+		retval = -EFAULT;
+		goto unlock_exit;
+	}
+
+	if (dev->interrupt_out_endpoint == NULL) {
+		/* try HID_REQ_SET_REPORT=9 on control_endpoint instead of interrupt_out_endpoint */
+		retval = usb_control_msg(interface_to_usbdev(dev->intf),
+					 usb_sndctrlpipe(interface_to_usbdev(dev->intf), 0),
+					 9,
+					 USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+					 1 << 8, 0,
+					 dev->interrupt_out_buffer,
+					 bytes_to_write,
+					 USB_CTRL_SET_TIMEOUT);
+		if (retval < 0)
+			dev_err(&dev->intf->dev,
+				"Couldn't submit HID_REQ_SET_REPORT %d\n",
+				retval);
+		goto unlock_exit;
+	}
+
+	/* send off the urb */
+	usb_fill_int_urb(dev->interrupt_out_urb,
+			 interface_to_usbdev(dev->intf),
+			 usb_sndintpipe(interface_to_usbdev(dev->intf),
+					dev->interrupt_out_endpoint->bEndpointAddress),
+			 dev->interrupt_out_buffer,
+			 bytes_to_write,
+			 ld_usb_interrupt_out_callback,
+			 dev,
+			 dev->interrupt_out_interval);
+
+	dev->interrupt_out_busy = 1;
+	wmb();
+
+	retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL);
+	if (retval) {
+		dev->interrupt_out_busy = 0;
+		dev_err(&dev->intf->dev,
+			"Couldn't submit interrupt_out_urb %d\n", retval);
+		goto unlock_exit;
+	}
+	retval = bytes_to_write;
+
+unlock_exit:
+	/* unlock the device */
+	mutex_unlock(&dev->mutex);
+
+exit:
+	return retval;
+}
+
+/* file operations needed when we register this driver */
+static const struct file_operations ld_usb_fops = {
+	.owner =	THIS_MODULE,
+	.read  =	ld_usb_read,
+	.write =	ld_usb_write,
+	.open =		ld_usb_open,
+	.release =	ld_usb_release,
+	.poll =		ld_usb_poll,
+	.llseek =	no_llseek,
+};
+
+/*
+ * usb class driver info in order to get a minor number from the usb core,
+ * and to have the device registered with the driver core
+ */
+static struct usb_class_driver ld_usb_class = {
+	.name =		"ldusb%d",
+	.fops =		&ld_usb_fops,
+	.minor_base =	USB_LD_MINOR_BASE,
+};
+
+/*
+ *	ld_usb_probe
+ *
+ *	Called by the usb core when a new device is connected that it thinks
+ *	this driver might be interested in.
+ */
+static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct ld_usb *dev = NULL;
+	struct usb_host_interface *iface_desc;
+	char *buffer;
+	int retval = -ENOMEM;
+	int res;
+
+	/* allocate memory for our device state and initialize it */
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		goto exit;
+	mutex_init(&dev->mutex);
+	spin_lock_init(&dev->rbsl);
+	dev->intf = intf;
+	init_waitqueue_head(&dev->read_wait);
+	init_waitqueue_head(&dev->write_wait);
+
+	/* workaround for early firmware versions on fast computers */
+	if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VENDOR_ID_LD) &&
+	    ((le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_LD_CASSY) ||
+	     (le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_LD_COM3LAB)) &&
+	    (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x103)) {
+		buffer = kmalloc(256, GFP_KERNEL);
+		if (!buffer)
+			goto error;
+		/* usb_string makes SETUP+STALL to leave always ControlReadLoop */
+		usb_string(udev, 255, buffer, 256);
+		kfree(buffer);
+	}
+
+	iface_desc = intf->cur_altsetting;
+
+	res = usb_find_last_int_in_endpoint(iface_desc,
+			&dev->interrupt_in_endpoint);
+	if (res) {
+		dev_err(&intf->dev, "Interrupt in endpoint not found\n");
+		retval = res;
+		goto error;
+	}
+
+	res = usb_find_last_int_out_endpoint(iface_desc,
+			&dev->interrupt_out_endpoint);
+	if (res)
+		dev_warn(&intf->dev, "Interrupt out endpoint not found (using control endpoint instead)\n");
+
+	dev->interrupt_in_endpoint_size = usb_endpoint_maxp(dev->interrupt_in_endpoint);
+	dev->ring_buffer = kcalloc(ring_buffer_size,
+			sizeof(size_t) + dev->interrupt_in_endpoint_size,
+			GFP_KERNEL);
+	if (!dev->ring_buffer)
+		goto error;
+	dev->interrupt_in_buffer = kmalloc(dev->interrupt_in_endpoint_size, GFP_KERNEL);
+	if (!dev->interrupt_in_buffer)
+		goto error;
+	dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->interrupt_in_urb)
+		goto error;
+	dev->interrupt_out_endpoint_size = dev->interrupt_out_endpoint ? usb_endpoint_maxp(dev->interrupt_out_endpoint) :
+									 udev->descriptor.bMaxPacketSize0;
+	dev->interrupt_out_buffer =
+		kmalloc_array(write_buffer_size,
+			      dev->interrupt_out_endpoint_size, GFP_KERNEL);
+	if (!dev->interrupt_out_buffer)
+		goto error;
+	dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->interrupt_out_urb)
+		goto error;
+	dev->interrupt_in_interval = max_t(int, min_interrupt_in_interval,
+					   dev->interrupt_in_endpoint->bInterval);
+	if (dev->interrupt_out_endpoint)
+		dev->interrupt_out_interval = max_t(int, min_interrupt_out_interval,
+						    dev->interrupt_out_endpoint->bInterval);
+
+	/* we can register the device now, as it is ready */
+	usb_set_intfdata(intf, dev);
+
+	retval = usb_register_dev(intf, &ld_usb_class);
+	if (retval) {
+		/* something prevented us from registering this driver */
+		dev_err(&intf->dev, "Not able to get a minor for this device.\n");
+		usb_set_intfdata(intf, NULL);
+		goto error;
+	}
+
+	/* let the user know what node this device is now attached to */
+	dev_info(&intf->dev, "LD USB Device #%d now attached to major %d minor %d\n",
+		(intf->minor - USB_LD_MINOR_BASE), USB_MAJOR, intf->minor);
+
+exit:
+	return retval;
+
+error:
+	ld_usb_delete(dev);
+
+	return retval;
+}
+
+/*
+ *	ld_usb_disconnect
+ *
+ *	Called by the usb core when the device is removed from the system.
+ */
+static void ld_usb_disconnect(struct usb_interface *intf)
+{
+	struct ld_usb *dev;
+	int minor;
+
+	dev = usb_get_intfdata(intf);
+	usb_set_intfdata(intf, NULL);
+
+	minor = intf->minor;
+
+	/* give back our minor */
+	usb_deregister_dev(intf, &ld_usb_class);
+
+	usb_poison_urb(dev->interrupt_in_urb);
+	usb_poison_urb(dev->interrupt_out_urb);
+
+	mutex_lock(&dev->mutex);
+
+	/* if the device is not opened, then we clean up right now */
+	if (!dev->open_count) {
+		mutex_unlock(&dev->mutex);
+		ld_usb_delete(dev);
+	} else {
+		dev->disconnected = 1;
+		/* wake up pollers */
+		wake_up_interruptible_all(&dev->read_wait);
+		wake_up_interruptible_all(&dev->write_wait);
+		mutex_unlock(&dev->mutex);
+	}
+
+	dev_info(&intf->dev, "LD USB Device #%d now disconnected\n",
+		 (minor - USB_LD_MINOR_BASE));
+}
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver ld_usb_driver = {
+	.name =		"ldusb",
+	.probe =	ld_usb_probe,
+	.disconnect =	ld_usb_disconnect,
+	.id_table =	ld_usb_table,
+};
+
+module_usb_driver(ld_usb_driver);
+
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
new file mode 100644
index 000000000..1c9e09138
--- /dev/null
+++ b/drivers/usb/misc/legousbtower.c
@@ -0,0 +1,879 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * LEGO USB Tower driver
+ *
+ * Copyright (C) 2003 David Glance <davidgsf@sourceforge.net>
+ *               2001-2004 Juergen Stuber <starblue@users.sourceforge.net>
+ *
+ * derived from USB Skeleton driver - 0.5
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * History:
+ *
+ * 2001-10-13 - 0.1 js
+ *   - first version
+ * 2001-11-03 - 0.2 js
+ *   - simplified buffering, one-shot URBs for writing
+ * 2001-11-10 - 0.3 js
+ *   - removed IOCTL (setting power/mode is more complicated, postponed)
+ * 2001-11-28 - 0.4 js
+ *   - added vendor commands for mode of operation and power level in open
+ * 2001-12-04 - 0.5 js
+ *   - set IR mode by default (by oversight 0.4 set VLL mode)
+ * 2002-01-11 - 0.5? pcchan
+ *   - make read buffer reusable and work around bytes_to_write issue between
+ *     uhci and legusbtower
+ * 2002-09-23 - 0.52 david (david@csse.uwa.edu.au)
+ *   - imported into lejos project
+ *   - changed wake_up to wake_up_interruptible
+ *   - changed to use lego0 rather than tower0
+ *   - changed dbg() to use __func__ rather than deprecated __func__
+ * 2003-01-12 - 0.53 david (david@csse.uwa.edu.au)
+ *   - changed read and write to write everything or
+ *     timeout (from a patch by Chris Riesen and Brett Thaeler driver)
+ *   - added ioctl functionality to set timeouts
+ * 2003-07-18 - 0.54 davidgsf (david@csse.uwa.edu.au)
+ *   - initial import into LegoUSB project
+ *   - merge of existing LegoUSB.c driver
+ * 2003-07-18 - 0.56 davidgsf (david@csse.uwa.edu.au)
+ *   - port to 2.6 style driver
+ * 2004-02-29 - 0.6 Juergen Stuber <starblue@users.sourceforge.net>
+ *   - fix locking
+ *   - unlink read URBs which are no longer needed
+ *   - allow increased buffer size, eliminates need for timeout on write
+ *   - have read URB running continuously
+ *   - added poll
+ *   - forbid seeking
+ *   - added nonblocking I/O
+ *   - changed back __func__ to __func__
+ *   - read and log tower firmware version
+ *   - reset tower on probe, avoids failure of first write
+ * 2004-03-09 - 0.7 Juergen Stuber <starblue@users.sourceforge.net>
+ *   - timeout read now only after inactivity, shorten default accordingly
+ * 2004-03-11 - 0.8 Juergen Stuber <starblue@users.sourceforge.net>
+ *   - log major, minor instead of possibly confusing device filename
+ *   - whitespace cleanup
+ * 2004-03-12 - 0.9 Juergen Stuber <starblue@users.sourceforge.net>
+ *   - normalize whitespace in debug messages
+ *   - take care about endianness in control message responses
+ * 2004-03-13 - 0.91 Juergen Stuber <starblue@users.sourceforge.net>
+ *   - make default intervals longer to accommodate current EHCI driver
+ * 2004-03-19 - 0.92 Juergen Stuber <starblue@users.sourceforge.net>
+ *   - replaced atomic_t by memory barriers
+ * 2004-04-21 - 0.93 Juergen Stuber <starblue@users.sourceforge.net>
+ *   - wait for completion of write urb in release (needed for remotecontrol)
+ *   - corrected poll for write direction (missing negation)
+ * 2004-04-22 - 0.94 Juergen Stuber <starblue@users.sourceforge.net>
+ *   - make device locking interruptible
+ * 2004-04-30 - 0.95 Juergen Stuber <starblue@users.sourceforge.net>
+ *   - check for valid udev on resubmitting and unlinking urbs
+ * 2004-08-03 - 0.96 Juergen Stuber <starblue@users.sourceforge.net>
+ *   - move reset into open to clean out spurious data
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/poll.h>
+
+
+#define DRIVER_AUTHOR "Juergen Stuber <starblue@sourceforge.net>"
+#define DRIVER_DESC "LEGO USB Tower Driver"
+
+
+/* The defaults are chosen to work with the latest versions of leJOS and NQC.
+ */
+
+/* Some legacy software likes to receive packets in one piece.
+ * In this case read_buffer_size should exceed the maximal packet length
+ * (417 for datalog uploads), and packet_timeout should be set.
+ */
+static int read_buffer_size = 480;
+module_param(read_buffer_size, int, 0);
+MODULE_PARM_DESC(read_buffer_size, "Read buffer size");
+
+/* Some legacy software likes to send packets in one piece.
+ * In this case write_buffer_size should exceed the maximal packet length
+ * (417 for firmware and program downloads).
+ * A problem with long writes is that the following read may time out
+ * if the software is not prepared to wait long enough.
+ */
+static int write_buffer_size = 480;
+module_param(write_buffer_size, int, 0);
+MODULE_PARM_DESC(write_buffer_size, "Write buffer size");
+
+/* Some legacy software expects reads to contain whole LASM packets.
+ * To achieve this, characters which arrive before a packet timeout
+ * occurs will be returned in a single read operation.
+ * A problem with long reads is that the software may time out
+ * if it is not prepared to wait long enough.
+ * The packet timeout should be greater than the time between the
+ * reception of subsequent characters, which should arrive about
+ * every 5ms for the standard 2400 baud.
+ * Set it to 0 to disable.
+ */
+static int packet_timeout = 50;
+module_param(packet_timeout, int, 0);
+MODULE_PARM_DESC(packet_timeout, "Packet timeout in ms");
+
+/* Some legacy software expects blocking reads to time out.
+ * Timeout occurs after the specified time of read and write inactivity.
+ * Set it to 0 to disable.
+ */
+static int read_timeout = 200;
+module_param(read_timeout, int, 0);
+MODULE_PARM_DESC(read_timeout, "Read timeout in ms");
+
+/* As of kernel version 2.6.4 ehci-hcd uses an
+ * "only one interrupt transfer per frame" shortcut
+ * to simplify the scheduling of periodic transfers.
+ * This conflicts with our standard 1ms intervals for in and out URBs.
+ * We use default intervals of 2ms for in and 8ms for out transfers,
+ * which is fast enough for 2400 baud and allows a small additional load.
+ * Increase the interval to allow more devices that do interrupt transfers,
+ * or set to 0 to use the standard interval from the endpoint descriptors.
+ */
+static int interrupt_in_interval = 2;
+module_param(interrupt_in_interval, int, 0);
+MODULE_PARM_DESC(interrupt_in_interval, "Interrupt in interval in ms");
+
+static int interrupt_out_interval = 8;
+module_param(interrupt_out_interval, int, 0);
+MODULE_PARM_DESC(interrupt_out_interval, "Interrupt out interval in ms");
+
+/* Define these values to match your device */
+#define LEGO_USB_TOWER_VENDOR_ID	0x0694
+#define LEGO_USB_TOWER_PRODUCT_ID	0x0001
+
+/* Vendor requests */
+#define LEGO_USB_TOWER_REQUEST_RESET		0x04
+#define LEGO_USB_TOWER_REQUEST_GET_VERSION	0xFD
+
+struct tower_reset_reply {
+	__le16 size;
+	__u8 err_code;
+	__u8 spare;
+};
+
+struct tower_get_version_reply {
+	__le16 size;
+	__u8 err_code;
+	__u8 spare;
+	__u8 major;
+	__u8 minor;
+	__le16 build_no;
+};
+
+
+/* table of devices that work with this driver */
+static const struct usb_device_id tower_table[] = {
+	{ USB_DEVICE(LEGO_USB_TOWER_VENDOR_ID, LEGO_USB_TOWER_PRODUCT_ID) },
+	{ }					/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, tower_table);
+
+#define LEGO_USB_TOWER_MINOR_BASE	160
+
+
+/* Structure to hold all of our device specific stuff */
+struct lego_usb_tower {
+	struct mutex		lock;		/* locks this structure */
+	struct usb_device	*udev;		/* save off the usb device pointer */
+	unsigned char		minor;		/* the starting minor number for this device */
+
+	int			open_count;	/* number of times this port has been opened */
+	unsigned long		disconnected:1;
+
+	char			*read_buffer;
+	size_t			read_buffer_length; /* this much came in */
+	size_t			read_packet_length; /* this much will be returned on read */
+	spinlock_t		read_buffer_lock;
+	int			packet_timeout_jiffies;
+	unsigned long		read_last_arrival;
+
+	wait_queue_head_t	read_wait;
+	wait_queue_head_t	write_wait;
+
+	char			*interrupt_in_buffer;
+	struct usb_endpoint_descriptor *interrupt_in_endpoint;
+	struct urb		*interrupt_in_urb;
+	int			interrupt_in_interval;
+	int			interrupt_in_done;
+
+	char			*interrupt_out_buffer;
+	struct usb_endpoint_descriptor *interrupt_out_endpoint;
+	struct urb		*interrupt_out_urb;
+	int			interrupt_out_interval;
+	int			interrupt_out_busy;
+
+};
+
+
+/* local function prototypes */
+static ssize_t tower_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos);
+static ssize_t tower_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos);
+static inline void tower_delete(struct lego_usb_tower *dev);
+static int tower_open(struct inode *inode, struct file *file);
+static int tower_release(struct inode *inode, struct file *file);
+static __poll_t tower_poll(struct file *file, poll_table *wait);
+static loff_t tower_llseek(struct file *file, loff_t off, int whence);
+
+static void tower_check_for_read_packet(struct lego_usb_tower *dev);
+static void tower_interrupt_in_callback(struct urb *urb);
+static void tower_interrupt_out_callback(struct urb *urb);
+
+static int  tower_probe(struct usb_interface *interface, const struct usb_device_id *id);
+static void tower_disconnect(struct usb_interface *interface);
+
+
+/* file operations needed when we register this driver */
+static const struct file_operations tower_fops = {
+	.owner =	THIS_MODULE,
+	.read  =	tower_read,
+	.write =	tower_write,
+	.open =		tower_open,
+	.release =	tower_release,
+	.poll =		tower_poll,
+	.llseek =	tower_llseek,
+};
+
+static char *legousbtower_devnode(struct device *dev, umode_t *mode)
+{
+	return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
+}
+
+/*
+ * usb class driver info in order to get a minor number from the usb core,
+ * and to have the device registered with the driver core
+ */
+static struct usb_class_driver tower_class = {
+	.name =		"legousbtower%d",
+	.devnode = 	legousbtower_devnode,
+	.fops =		&tower_fops,
+	.minor_base =	LEGO_USB_TOWER_MINOR_BASE,
+};
+
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver tower_driver = {
+	.name =		"legousbtower",
+	.probe =	tower_probe,
+	.disconnect =	tower_disconnect,
+	.id_table =	tower_table,
+};
+
+
+/*
+ *	lego_usb_tower_debug_data
+ */
+static inline void lego_usb_tower_debug_data(struct device *dev,
+					     const char *function, int size,
+					     const unsigned char *data)
+{
+	dev_dbg(dev, "%s - length = %d, data = %*ph\n",
+		function, size, size, data);
+}
+
+
+/*
+ *	tower_delete
+ */
+static inline void tower_delete(struct lego_usb_tower *dev)
+{
+	/* free data structures */
+	usb_free_urb(dev->interrupt_in_urb);
+	usb_free_urb(dev->interrupt_out_urb);
+	kfree(dev->read_buffer);
+	kfree(dev->interrupt_in_buffer);
+	kfree(dev->interrupt_out_buffer);
+	usb_put_dev(dev->udev);
+	kfree(dev);
+}
+
+
+/*
+ *	tower_open
+ */
+static int tower_open(struct inode *inode, struct file *file)
+{
+	struct lego_usb_tower *dev = NULL;
+	int subminor;
+	int retval = 0;
+	struct usb_interface *interface;
+	struct tower_reset_reply reset_reply;
+	int result;
+
+	nonseekable_open(inode, file);
+	subminor = iminor(inode);
+
+	interface = usb_find_interface(&tower_driver, subminor);
+	if (!interface) {
+		pr_err("error, can't find device for minor %d\n", subminor);
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	dev = usb_get_intfdata(interface);
+	if (!dev) {
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	/* lock this device */
+	if (mutex_lock_interruptible(&dev->lock)) {
+	        retval = -ERESTARTSYS;
+		goto exit;
+	}
+
+
+	/* allow opening only once */
+	if (dev->open_count) {
+		retval = -EBUSY;
+		goto unlock_exit;
+	}
+
+	/* reset the tower */
+	result = usb_control_msg_recv(dev->udev, 0,
+				      LEGO_USB_TOWER_REQUEST_RESET,
+				      USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE,
+				      0, 0,
+				      &reset_reply, sizeof(reset_reply), 1000,
+				      GFP_KERNEL);
+	if (result < 0) {
+		dev_err(&dev->udev->dev,
+			"LEGO USB Tower reset control request failed\n");
+		retval = result;
+		goto unlock_exit;
+	}
+
+	/* initialize in direction */
+	dev->read_buffer_length = 0;
+	dev->read_packet_length = 0;
+	usb_fill_int_urb(dev->interrupt_in_urb,
+			 dev->udev,
+			 usb_rcvintpipe(dev->udev, dev->interrupt_in_endpoint->bEndpointAddress),
+			 dev->interrupt_in_buffer,
+			 usb_endpoint_maxp(dev->interrupt_in_endpoint),
+			 tower_interrupt_in_callback,
+			 dev,
+			 dev->interrupt_in_interval);
+
+	dev->interrupt_in_done = 0;
+	mb();
+
+	retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+	if (retval) {
+		dev_err(&dev->udev->dev,
+			"Couldn't submit interrupt_in_urb %d\n", retval);
+		goto unlock_exit;
+	}
+
+	/* save device in the file's private structure */
+	file->private_data = dev;
+
+	dev->open_count = 1;
+
+unlock_exit:
+	mutex_unlock(&dev->lock);
+
+exit:
+	return retval;
+}
+
+/*
+ *	tower_release
+ */
+static int tower_release(struct inode *inode, struct file *file)
+{
+	struct lego_usb_tower *dev;
+	int retval = 0;
+
+	dev = file->private_data;
+	if (dev == NULL) {
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	mutex_lock(&dev->lock);
+
+	if (dev->disconnected) {
+		/* the device was unplugged before the file was released */
+
+		/* unlock here as tower_delete frees dev */
+		mutex_unlock(&dev->lock);
+		tower_delete(dev);
+		goto exit;
+	}
+
+	/* wait until write transfer is finished */
+	if (dev->interrupt_out_busy) {
+		wait_event_interruptible_timeout(dev->write_wait, !dev->interrupt_out_busy,
+						 2 * HZ);
+	}
+
+	/* shutdown transfers */
+	usb_kill_urb(dev->interrupt_in_urb);
+	usb_kill_urb(dev->interrupt_out_urb);
+
+	dev->open_count = 0;
+
+	mutex_unlock(&dev->lock);
+exit:
+	return retval;
+}
+
+/*
+ *	tower_check_for_read_packet
+ *
+ *      To get correct semantics for signals and non-blocking I/O
+ *      with packetizing we pretend not to see any data in the read buffer
+ *      until it has been there unchanged for at least
+ *      dev->packet_timeout_jiffies, or until the buffer is full.
+ */
+static void tower_check_for_read_packet(struct lego_usb_tower *dev)
+{
+	spin_lock_irq(&dev->read_buffer_lock);
+	if (!packet_timeout
+	    || time_after(jiffies, dev->read_last_arrival + dev->packet_timeout_jiffies)
+	    || dev->read_buffer_length == read_buffer_size) {
+		dev->read_packet_length = dev->read_buffer_length;
+	}
+	dev->interrupt_in_done = 0;
+	spin_unlock_irq(&dev->read_buffer_lock);
+}
+
+
+/*
+ *	tower_poll
+ */
+static __poll_t tower_poll(struct file *file, poll_table *wait)
+{
+	struct lego_usb_tower *dev;
+	__poll_t mask = 0;
+
+	dev = file->private_data;
+
+	if (dev->disconnected)
+		return EPOLLERR | EPOLLHUP;
+
+	poll_wait(file, &dev->read_wait, wait);
+	poll_wait(file, &dev->write_wait, wait);
+
+	tower_check_for_read_packet(dev);
+	if (dev->read_packet_length > 0)
+		mask |= EPOLLIN | EPOLLRDNORM;
+	if (!dev->interrupt_out_busy)
+		mask |= EPOLLOUT | EPOLLWRNORM;
+
+	return mask;
+}
+
+
+/*
+ *	tower_llseek
+ */
+static loff_t tower_llseek(struct file *file, loff_t off, int whence)
+{
+	return -ESPIPE;		/* unseekable */
+}
+
+
+/*
+ *	tower_read
+ */
+static ssize_t tower_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
+{
+	struct lego_usb_tower *dev;
+	size_t bytes_to_read;
+	int i;
+	int retval = 0;
+	unsigned long timeout = 0;
+
+	dev = file->private_data;
+
+	/* lock this object */
+	if (mutex_lock_interruptible(&dev->lock)) {
+		retval = -ERESTARTSYS;
+		goto exit;
+	}
+
+	/* verify that the device wasn't unplugged */
+	if (dev->disconnected) {
+		retval = -ENODEV;
+		goto unlock_exit;
+	}
+
+	/* verify that we actually have some data to read */
+	if (count == 0) {
+		dev_dbg(&dev->udev->dev, "read request of 0 bytes\n");
+		goto unlock_exit;
+	}
+
+	if (read_timeout)
+		timeout = jiffies + msecs_to_jiffies(read_timeout);
+
+	/* wait for data */
+	tower_check_for_read_packet(dev);
+	while (dev->read_packet_length == 0) {
+		if (file->f_flags & O_NONBLOCK) {
+			retval = -EAGAIN;
+			goto unlock_exit;
+		}
+		retval = wait_event_interruptible_timeout(dev->read_wait, dev->interrupt_in_done, dev->packet_timeout_jiffies);
+		if (retval < 0)
+			goto unlock_exit;
+
+		/* reset read timeout during read or write activity */
+		if (read_timeout
+		    && (dev->read_buffer_length || dev->interrupt_out_busy)) {
+			timeout = jiffies + msecs_to_jiffies(read_timeout);
+		}
+		/* check for read timeout */
+		if (read_timeout && time_after(jiffies, timeout)) {
+			retval = -ETIMEDOUT;
+			goto unlock_exit;
+		}
+		tower_check_for_read_packet(dev);
+	}
+
+	/* copy the data from read_buffer into userspace */
+	bytes_to_read = min(count, dev->read_packet_length);
+
+	if (copy_to_user(buffer, dev->read_buffer, bytes_to_read)) {
+		retval = -EFAULT;
+		goto unlock_exit;
+	}
+
+	spin_lock_irq(&dev->read_buffer_lock);
+	dev->read_buffer_length -= bytes_to_read;
+	dev->read_packet_length -= bytes_to_read;
+	for (i = 0; i < dev->read_buffer_length; i++)
+		dev->read_buffer[i] = dev->read_buffer[i+bytes_to_read];
+	spin_unlock_irq(&dev->read_buffer_lock);
+
+	retval = bytes_to_read;
+
+unlock_exit:
+	/* unlock the device */
+	mutex_unlock(&dev->lock);
+
+exit:
+	return retval;
+}
+
+
+/*
+ *	tower_write
+ */
+static ssize_t tower_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
+{
+	struct lego_usb_tower *dev;
+	size_t bytes_to_write;
+	int retval = 0;
+
+	dev = file->private_data;
+
+	/* lock this object */
+	if (mutex_lock_interruptible(&dev->lock)) {
+		retval = -ERESTARTSYS;
+		goto exit;
+	}
+
+	/* verify that the device wasn't unplugged */
+	if (dev->disconnected) {
+		retval = -ENODEV;
+		goto unlock_exit;
+	}
+
+	/* verify that we actually have some data to write */
+	if (count == 0) {
+		dev_dbg(&dev->udev->dev, "write request of 0 bytes\n");
+		goto unlock_exit;
+	}
+
+	/* wait until previous transfer is finished */
+	while (dev->interrupt_out_busy) {
+		if (file->f_flags & O_NONBLOCK) {
+			retval = -EAGAIN;
+			goto unlock_exit;
+		}
+		retval = wait_event_interruptible(dev->write_wait,
+						  !dev->interrupt_out_busy);
+		if (retval)
+			goto unlock_exit;
+	}
+
+	/* write the data into interrupt_out_buffer from userspace */
+	bytes_to_write = min_t(int, count, write_buffer_size);
+	dev_dbg(&dev->udev->dev, "%s: count = %zd, bytes_to_write = %zd\n",
+		__func__, count, bytes_to_write);
+
+	if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write)) {
+		retval = -EFAULT;
+		goto unlock_exit;
+	}
+
+	/* send off the urb */
+	usb_fill_int_urb(dev->interrupt_out_urb,
+			 dev->udev,
+			 usb_sndintpipe(dev->udev, dev->interrupt_out_endpoint->bEndpointAddress),
+			 dev->interrupt_out_buffer,
+			 bytes_to_write,
+			 tower_interrupt_out_callback,
+			 dev,
+			 dev->interrupt_out_interval);
+
+	dev->interrupt_out_busy = 1;
+	wmb();
+
+	retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL);
+	if (retval) {
+		dev->interrupt_out_busy = 0;
+		dev_err(&dev->udev->dev,
+			"Couldn't submit interrupt_out_urb %d\n", retval);
+		goto unlock_exit;
+	}
+	retval = bytes_to_write;
+
+unlock_exit:
+	/* unlock the device */
+	mutex_unlock(&dev->lock);
+
+exit:
+	return retval;
+}
+
+
+/*
+ *	tower_interrupt_in_callback
+ */
+static void tower_interrupt_in_callback(struct urb *urb)
+{
+	struct lego_usb_tower *dev = urb->context;
+	int status = urb->status;
+	int retval;
+	unsigned long flags;
+
+	lego_usb_tower_debug_data(&dev->udev->dev, __func__,
+				  urb->actual_length, urb->transfer_buffer);
+
+	if (status) {
+		if (status == -ENOENT ||
+		    status == -ECONNRESET ||
+		    status == -ESHUTDOWN) {
+			goto exit;
+		} else {
+			dev_dbg(&dev->udev->dev,
+				"%s: nonzero status received: %d\n", __func__,
+				status);
+			goto resubmit; /* maybe we can recover */
+		}
+	}
+
+	if (urb->actual_length > 0) {
+		spin_lock_irqsave(&dev->read_buffer_lock, flags);
+		if (dev->read_buffer_length + urb->actual_length < read_buffer_size) {
+			memcpy(dev->read_buffer + dev->read_buffer_length,
+			       dev->interrupt_in_buffer,
+			       urb->actual_length);
+			dev->read_buffer_length += urb->actual_length;
+			dev->read_last_arrival = jiffies;
+			dev_dbg(&dev->udev->dev, "%s: received %d bytes\n",
+				__func__, urb->actual_length);
+		} else {
+			pr_warn("read_buffer overflow, %d bytes dropped\n",
+				urb->actual_length);
+		}
+		spin_unlock_irqrestore(&dev->read_buffer_lock, flags);
+	}
+
+resubmit:
+	retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC);
+	if (retval) {
+		dev_err(&dev->udev->dev, "%s: usb_submit_urb failed (%d)\n",
+			__func__, retval);
+	}
+exit:
+	dev->interrupt_in_done = 1;
+	wake_up_interruptible(&dev->read_wait);
+}
+
+
+/*
+ *	tower_interrupt_out_callback
+ */
+static void tower_interrupt_out_callback(struct urb *urb)
+{
+	struct lego_usb_tower *dev = urb->context;
+	int status = urb->status;
+
+	lego_usb_tower_debug_data(&dev->udev->dev, __func__,
+				  urb->actual_length, urb->transfer_buffer);
+
+	/* sync/async unlink faults aren't errors */
+	if (status && !(status == -ENOENT ||
+			status == -ECONNRESET ||
+			status == -ESHUTDOWN)) {
+		dev_dbg(&dev->udev->dev,
+			"%s: nonzero write bulk status received: %d\n", __func__,
+			status);
+	}
+
+	dev->interrupt_out_busy = 0;
+	wake_up_interruptible(&dev->write_wait);
+}
+
+
+/*
+ *	tower_probe
+ *
+ *	Called by the usb core when a new device is connected that it thinks
+ *	this driver might be interested in.
+ */
+static int tower_probe(struct usb_interface *interface, const struct usb_device_id *id)
+{
+	struct device *idev = &interface->dev;
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct lego_usb_tower *dev;
+	struct tower_get_version_reply get_version_reply;
+	int retval = -ENOMEM;
+	int result;
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		goto exit;
+
+	mutex_init(&dev->lock);
+	dev->udev = usb_get_dev(udev);
+	spin_lock_init(&dev->read_buffer_lock);
+	dev->packet_timeout_jiffies = msecs_to_jiffies(packet_timeout);
+	dev->read_last_arrival = jiffies;
+	init_waitqueue_head(&dev->read_wait);
+	init_waitqueue_head(&dev->write_wait);
+
+	result = usb_find_common_endpoints_reverse(interface->cur_altsetting,
+			NULL, NULL,
+			&dev->interrupt_in_endpoint,
+			&dev->interrupt_out_endpoint);
+	if (result) {
+		dev_err(idev, "interrupt endpoints not found\n");
+		retval = result;
+		goto error;
+	}
+
+	dev->read_buffer = kmalloc(read_buffer_size, GFP_KERNEL);
+	if (!dev->read_buffer)
+		goto error;
+	dev->interrupt_in_buffer = kmalloc(usb_endpoint_maxp(dev->interrupt_in_endpoint), GFP_KERNEL);
+	if (!dev->interrupt_in_buffer)
+		goto error;
+	dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->interrupt_in_urb)
+		goto error;
+	dev->interrupt_out_buffer = kmalloc(write_buffer_size, GFP_KERNEL);
+	if (!dev->interrupt_out_buffer)
+		goto error;
+	dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->interrupt_out_urb)
+		goto error;
+	dev->interrupt_in_interval = interrupt_in_interval ? interrupt_in_interval : dev->interrupt_in_endpoint->bInterval;
+	dev->interrupt_out_interval = interrupt_out_interval ? interrupt_out_interval : dev->interrupt_out_endpoint->bInterval;
+
+	/* get the firmware version and log it */
+	result = usb_control_msg_recv(udev, 0,
+				      LEGO_USB_TOWER_REQUEST_GET_VERSION,
+				      USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE,
+				      0,
+				      0,
+				      &get_version_reply,
+				      sizeof(get_version_reply),
+				      1000, GFP_KERNEL);
+	if (result) {
+		dev_err(idev, "get version request failed: %d\n", result);
+		retval = result;
+		goto error;
+	}
+	dev_info(&interface->dev,
+		 "LEGO USB Tower firmware version is %d.%d build %d\n",
+		 get_version_reply.major,
+		 get_version_reply.minor,
+		 le16_to_cpu(get_version_reply.build_no));
+
+	/* we can register the device now, as it is ready */
+	usb_set_intfdata(interface, dev);
+
+	retval = usb_register_dev(interface, &tower_class);
+	if (retval) {
+		/* something prevented us from registering this driver */
+		dev_err(idev, "Not able to get a minor for this device.\n");
+		goto error;
+	}
+	dev->minor = interface->minor;
+
+	/* let the user know what node this device is now attached to */
+	dev_info(&interface->dev, "LEGO USB Tower #%d now attached to major "
+		 "%d minor %d\n", (dev->minor - LEGO_USB_TOWER_MINOR_BASE),
+		 USB_MAJOR, dev->minor);
+
+exit:
+	return retval;
+
+error:
+	tower_delete(dev);
+	return retval;
+}
+
+
+/*
+ *	tower_disconnect
+ *
+ *	Called by the usb core when the device is removed from the system.
+ */
+static void tower_disconnect(struct usb_interface *interface)
+{
+	struct lego_usb_tower *dev;
+	int minor;
+
+	dev = usb_get_intfdata(interface);
+
+	minor = dev->minor;
+
+	/* give back our minor and prevent further open() */
+	usb_deregister_dev(interface, &tower_class);
+
+	/* stop I/O */
+	usb_poison_urb(dev->interrupt_in_urb);
+	usb_poison_urb(dev->interrupt_out_urb);
+
+	mutex_lock(&dev->lock);
+
+	/* if the device is not opened, then we clean up right now */
+	if (!dev->open_count) {
+		mutex_unlock(&dev->lock);
+		tower_delete(dev);
+	} else {
+		dev->disconnected = 1;
+		/* wake up pollers */
+		wake_up_interruptible_all(&dev->read_wait);
+		wake_up_interruptible_all(&dev->write_wait);
+		mutex_unlock(&dev->lock);
+	}
+
+	dev_info(&interface->dev, "LEGO USB Tower #%d now disconnected\n",
+		 (minor - LEGO_USB_TOWER_MINOR_BASE));
+}
+
+module_usb_driver(tower_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/lvstest.c b/drivers/usb/misc/lvstest.c
new file mode 100644
index 000000000..25ec5666a
--- /dev/null
+++ b/drivers/usb/misc/lvstest.c
@@ -0,0 +1,476 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * drivers/usb/misc/lvstest.c
+ *
+ * Test pattern generation for Link Layer Validation System Tests
+ *
+ * Copyright (C) 2014 ST Microelectronics
+ * Pratyush Anand <pratyush.anand@gmail.com>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/ch11.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/phy.h>
+
+struct lvs_rh {
+	/* root hub interface */
+	struct usb_interface *intf;
+	/* if lvs device connected */
+	bool present;
+	/* port no at which lvs device is present */
+	int portnum;
+	/* urb buffer */
+	u8 buffer[8];
+	/* class descriptor */
+	struct usb_hub_descriptor descriptor;
+	/* urb for polling interrupt pipe */
+	struct urb *urb;
+	/* LVH RH work */
+	struct work_struct	rh_work;
+	/* RH port status */
+	struct usb_port_status port_status;
+};
+
+static struct usb_device *create_lvs_device(struct usb_interface *intf)
+{
+	struct usb_device *udev, *hdev;
+	struct usb_hcd *hcd;
+	struct lvs_rh *lvs = usb_get_intfdata(intf);
+
+	if (!lvs->present) {
+		dev_err(&intf->dev, "No LVS device is present\n");
+		return NULL;
+	}
+
+	hdev = interface_to_usbdev(intf);
+	hcd = bus_to_hcd(hdev->bus);
+
+	udev = usb_alloc_dev(hdev, hdev->bus, lvs->portnum);
+	if (!udev) {
+		dev_err(&intf->dev, "Could not allocate lvs udev\n");
+		return NULL;
+	}
+	udev->speed = USB_SPEED_SUPER;
+	udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
+	usb_set_device_state(udev, USB_STATE_DEFAULT);
+
+	if (hcd->driver->enable_device) {
+		if (hcd->driver->enable_device(hcd, udev) < 0) {
+			dev_err(&intf->dev, "Failed to enable\n");
+			usb_put_dev(udev);
+			return NULL;
+		}
+	}
+
+	return udev;
+}
+
+static void destroy_lvs_device(struct usb_device *udev)
+{
+	struct usb_device *hdev = udev->parent;
+	struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
+
+	if (hcd->driver->free_dev)
+		hcd->driver->free_dev(hcd, udev);
+
+	usb_put_dev(udev);
+}
+
+static int lvs_rh_clear_port_feature(struct usb_device *hdev,
+		int port1, int feature)
+{
+	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+		USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port1,
+		NULL, 0, 1000);
+}
+
+static int lvs_rh_set_port_feature(struct usb_device *hdev,
+		int port1, int feature)
+{
+	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+		USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port1,
+		NULL, 0, 1000);
+}
+
+static ssize_t u3_entry_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *hdev = interface_to_usbdev(intf);
+	struct lvs_rh *lvs = usb_get_intfdata(intf);
+	struct usb_device *udev;
+	int ret;
+
+	udev = create_lvs_device(intf);
+	if (!udev) {
+		dev_err(dev, "failed to create lvs device\n");
+		return -ENOMEM;
+	}
+
+	ret = lvs_rh_set_port_feature(hdev, lvs->portnum,
+			USB_PORT_FEAT_SUSPEND);
+	if (ret < 0)
+		dev_err(dev, "can't issue U3 entry %d\n", ret);
+
+	destroy_lvs_device(udev);
+
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+static DEVICE_ATTR_WO(u3_entry);
+
+static ssize_t u3_exit_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *hdev = interface_to_usbdev(intf);
+	struct lvs_rh *lvs = usb_get_intfdata(intf);
+	struct usb_device *udev;
+	int ret;
+
+	udev = create_lvs_device(intf);
+	if (!udev) {
+		dev_err(dev, "failed to create lvs device\n");
+		return -ENOMEM;
+	}
+
+	ret = lvs_rh_clear_port_feature(hdev, lvs->portnum,
+			USB_PORT_FEAT_SUSPEND);
+	if (ret < 0)
+		dev_err(dev, "can't issue U3 exit %d\n", ret);
+
+	destroy_lvs_device(udev);
+
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+static DEVICE_ATTR_WO(u3_exit);
+
+static ssize_t hot_reset_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *hdev = interface_to_usbdev(intf);
+	struct lvs_rh *lvs = usb_get_intfdata(intf);
+	int ret;
+
+	ret = lvs_rh_set_port_feature(hdev, lvs->portnum,
+			USB_PORT_FEAT_RESET);
+	if (ret < 0) {
+		dev_err(dev, "can't issue hot reset %d\n", ret);
+		return ret;
+	}
+
+	return count;
+}
+static DEVICE_ATTR_WO(hot_reset);
+
+static ssize_t warm_reset_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *hdev = interface_to_usbdev(intf);
+	struct lvs_rh *lvs = usb_get_intfdata(intf);
+	int ret;
+
+	ret = lvs_rh_set_port_feature(hdev, lvs->portnum,
+			USB_PORT_FEAT_BH_PORT_RESET);
+	if (ret < 0) {
+		dev_err(dev, "can't issue warm reset %d\n", ret);
+		return ret;
+	}
+
+	return count;
+}
+static DEVICE_ATTR_WO(warm_reset);
+
+static ssize_t u2_timeout_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *hdev = interface_to_usbdev(intf);
+	struct lvs_rh *lvs = usb_get_intfdata(intf);
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret < 0) {
+		dev_err(dev, "couldn't parse string %d\n", ret);
+		return ret;
+	}
+
+	if (val > 127)
+		return -EINVAL;
+
+	ret = lvs_rh_set_port_feature(hdev, lvs->portnum | (val << 8),
+			USB_PORT_FEAT_U2_TIMEOUT);
+	if (ret < 0) {
+		dev_err(dev, "Error %d while setting U2 timeout %ld\n", ret, val);
+		return ret;
+	}
+
+	return count;
+}
+static DEVICE_ATTR_WO(u2_timeout);
+
+static ssize_t u1_timeout_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *hdev = interface_to_usbdev(intf);
+	struct lvs_rh *lvs = usb_get_intfdata(intf);
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret < 0) {
+		dev_err(dev, "couldn't parse string %d\n", ret);
+		return ret;
+	}
+
+	if (val > 127)
+		return -EINVAL;
+
+	ret = lvs_rh_set_port_feature(hdev, lvs->portnum | (val << 8),
+			USB_PORT_FEAT_U1_TIMEOUT);
+	if (ret < 0) {
+		dev_err(dev, "Error %d while setting U1 timeout %ld\n", ret, val);
+		return ret;
+	}
+
+	return count;
+}
+static DEVICE_ATTR_WO(u1_timeout);
+
+static ssize_t get_dev_desc_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *udev;
+	struct usb_device_descriptor *descriptor;
+	int ret;
+
+	descriptor = kmalloc(sizeof(*descriptor), GFP_KERNEL);
+	if (!descriptor)
+		return -ENOMEM;
+
+	udev = create_lvs_device(intf);
+	if (!udev) {
+		dev_err(dev, "failed to create lvs device\n");
+		ret = -ENOMEM;
+		goto free_desc;
+	}
+
+	ret = usb_control_msg(udev, (PIPE_CONTROL << 30) | USB_DIR_IN,
+			USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, USB_DT_DEVICE << 8,
+			0, descriptor, sizeof(*descriptor),
+			USB_CTRL_GET_TIMEOUT);
+	if (ret < 0)
+		dev_err(dev, "can't read device descriptor %d\n", ret);
+
+	destroy_lvs_device(udev);
+
+free_desc:
+	kfree(descriptor);
+
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+static DEVICE_ATTR_WO(get_dev_desc);
+
+static ssize_t enable_compliance_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *hdev = interface_to_usbdev(intf);
+	struct lvs_rh *lvs = usb_get_intfdata(intf);
+	int ret;
+
+	ret = lvs_rh_set_port_feature(hdev,
+			lvs->portnum | USB_SS_PORT_LS_COMP_MOD << 3,
+			USB_PORT_FEAT_LINK_STATE);
+	if (ret < 0) {
+		dev_err(dev, "can't enable compliance mode %d\n", ret);
+		return ret;
+	}
+
+	return count;
+}
+static DEVICE_ATTR_WO(enable_compliance);
+
+static struct attribute *lvs_attrs[] = {
+	&dev_attr_get_dev_desc.attr,
+	&dev_attr_u1_timeout.attr,
+	&dev_attr_u2_timeout.attr,
+	&dev_attr_hot_reset.attr,
+	&dev_attr_warm_reset.attr,
+	&dev_attr_u3_entry.attr,
+	&dev_attr_u3_exit.attr,
+	&dev_attr_enable_compliance.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(lvs);
+
+static void lvs_rh_work(struct work_struct *work)
+{
+	struct lvs_rh *lvs = container_of(work, struct lvs_rh, rh_work);
+	struct usb_interface *intf = lvs->intf;
+	struct usb_device *hdev = interface_to_usbdev(intf);
+	struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
+	struct usb_hub_descriptor *descriptor = &lvs->descriptor;
+	struct usb_port_status *port_status = &lvs->port_status;
+	int i, ret = 0;
+	u16 portchange;
+
+	/* Examine each root port */
+	for (i = 1; i <= descriptor->bNbrPorts; i++) {
+		ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+			USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, i,
+			port_status, sizeof(*port_status), 1000);
+		if (ret < 4)
+			continue;
+
+		portchange = le16_to_cpu(port_status->wPortChange);
+
+		if (portchange & USB_PORT_STAT_C_LINK_STATE)
+			lvs_rh_clear_port_feature(hdev, i,
+					USB_PORT_FEAT_C_PORT_LINK_STATE);
+		if (portchange & USB_PORT_STAT_C_ENABLE)
+			lvs_rh_clear_port_feature(hdev, i,
+					USB_PORT_FEAT_C_ENABLE);
+		if (portchange & USB_PORT_STAT_C_RESET)
+			lvs_rh_clear_port_feature(hdev, i,
+					USB_PORT_FEAT_C_RESET);
+		if (portchange & USB_PORT_STAT_C_BH_RESET)
+			lvs_rh_clear_port_feature(hdev, i,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+		if (portchange & USB_PORT_STAT_C_CONNECTION) {
+			lvs_rh_clear_port_feature(hdev, i,
+					USB_PORT_FEAT_C_CONNECTION);
+
+			if (le16_to_cpu(port_status->wPortStatus) &
+					USB_PORT_STAT_CONNECTION) {
+				lvs->present = true;
+				lvs->portnum = i;
+				if (hcd->usb_phy)
+					usb_phy_notify_connect(hcd->usb_phy,
+							USB_SPEED_SUPER);
+			} else {
+				lvs->present = false;
+				if (hcd->usb_phy)
+					usb_phy_notify_disconnect(hcd->usb_phy,
+							USB_SPEED_SUPER);
+			}
+			break;
+		}
+	}
+
+	ret = usb_submit_urb(lvs->urb, GFP_KERNEL);
+	if (ret != 0 && ret != -ENODEV && ret != -EPERM)
+		dev_err(&intf->dev, "urb resubmit error %d\n", ret);
+}
+
+static void lvs_rh_irq(struct urb *urb)
+{
+	struct lvs_rh *lvs = urb->context;
+
+	schedule_work(&lvs->rh_work);
+}
+
+static int lvs_rh_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	struct usb_device *hdev;
+	struct usb_host_interface *desc;
+	struct usb_endpoint_descriptor *endpoint;
+	struct lvs_rh *lvs;
+	unsigned int pipe;
+	int ret, maxp;
+
+	hdev = interface_to_usbdev(intf);
+	desc = intf->cur_altsetting;
+
+	ret = usb_find_int_in_endpoint(desc, &endpoint);
+	if (ret)
+		return ret;
+
+	/* valid only for SS root hub */
+	if (hdev->descriptor.bDeviceProtocol != USB_HUB_PR_SS || hdev->parent) {
+		dev_err(&intf->dev, "Bind LVS driver with SS root Hub only\n");
+		return -EINVAL;
+	}
+
+	lvs = devm_kzalloc(&intf->dev, sizeof(*lvs), GFP_KERNEL);
+	if (!lvs)
+		return -ENOMEM;
+
+	lvs->intf = intf;
+	usb_set_intfdata(intf, lvs);
+
+	/* how many number of ports this root hub has */
+	ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+			USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
+			USB_DT_SS_HUB << 8, 0, &lvs->descriptor,
+			USB_DT_SS_HUB_SIZE, USB_CTRL_GET_TIMEOUT);
+	if (ret < (USB_DT_HUB_NONVAR_SIZE + 2)) {
+		dev_err(&hdev->dev, "wrong root hub descriptor read %d\n", ret);
+		return ret < 0 ? ret : -EINVAL;
+	}
+
+	/* submit urb to poll interrupt endpoint */
+	lvs->urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!lvs->urb)
+		return -ENOMEM;
+
+	INIT_WORK(&lvs->rh_work, lvs_rh_work);
+
+	pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress);
+	maxp = usb_maxpacket(hdev, pipe);
+	usb_fill_int_urb(lvs->urb, hdev, pipe, &lvs->buffer[0], maxp,
+			lvs_rh_irq, lvs, endpoint->bInterval);
+
+	ret = usb_submit_urb(lvs->urb, GFP_KERNEL);
+	if (ret < 0) {
+		dev_err(&intf->dev, "couldn't submit lvs urb %d\n", ret);
+		goto free_urb;
+	}
+
+	return ret;
+
+free_urb:
+	usb_free_urb(lvs->urb);
+	return ret;
+}
+
+static void lvs_rh_disconnect(struct usb_interface *intf)
+{
+	struct lvs_rh *lvs = usb_get_intfdata(intf);
+
+	usb_poison_urb(lvs->urb); /* used in scheduled work */
+	flush_work(&lvs->rh_work);
+	usb_free_urb(lvs->urb);
+}
+
+static struct usb_driver lvs_driver = {
+	.name =		"lvs",
+	.probe =	lvs_rh_probe,
+	.disconnect =	lvs_rh_disconnect,
+	.dev_groups =	lvs_groups,
+};
+
+module_usb_driver(lvs_driver);
+
+MODULE_DESCRIPTION("Link Layer Validation System Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
new file mode 100644
index 000000000..8edd0375e
--- /dev/null
+++ b/drivers/usb/misc/onboard_usb_hub.c
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for onboard USB hubs
+ *
+ * Copyright (c) 2022, Google LLC
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/gpio/consumer.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/sysfs.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/onboard_hub.h>
+#include <linux/workqueue.h>
+
+#include "onboard_usb_hub.h"
+
+static void onboard_hub_attach_usb_driver(struct work_struct *work);
+
+static struct usb_device_driver onboard_hub_usbdev_driver;
+static DECLARE_WORK(attach_usb_driver_work, onboard_hub_attach_usb_driver);
+
+/************************** Platform driver **************************/
+
+struct usbdev_node {
+	struct usb_device *udev;
+	struct list_head list;
+};
+
+struct onboard_hub {
+	struct regulator *vdd;
+	struct device *dev;
+	const struct onboard_hub_pdata *pdata;
+	struct gpio_desc *reset_gpio;
+	bool always_powered_in_suspend;
+	bool is_powered_on;
+	bool going_away;
+	struct list_head udev_list;
+	struct mutex lock;
+};
+
+static int onboard_hub_power_on(struct onboard_hub *hub)
+{
+	int err;
+
+	err = regulator_enable(hub->vdd);
+	if (err) {
+		dev_err(hub->dev, "failed to enable regulator: %d\n", err);
+		return err;
+	}
+
+	fsleep(hub->pdata->reset_us);
+	gpiod_set_value_cansleep(hub->reset_gpio, 0);
+
+	hub->is_powered_on = true;
+
+	return 0;
+}
+
+static int onboard_hub_power_off(struct onboard_hub *hub)
+{
+	int err;
+
+	gpiod_set_value_cansleep(hub->reset_gpio, 1);
+
+	err = regulator_disable(hub->vdd);
+	if (err) {
+		dev_err(hub->dev, "failed to disable regulator: %d\n", err);
+		return err;
+	}
+
+	hub->is_powered_on = false;
+
+	return 0;
+}
+
+static int __maybe_unused onboard_hub_suspend(struct device *dev)
+{
+	struct onboard_hub *hub = dev_get_drvdata(dev);
+	struct usbdev_node *node;
+	bool power_off = true;
+
+	if (hub->always_powered_in_suspend)
+		return 0;
+
+	mutex_lock(&hub->lock);
+
+	list_for_each_entry(node, &hub->udev_list, list) {
+		if (!device_may_wakeup(node->udev->bus->controller))
+			continue;
+
+		if (usb_wakeup_enabled_descendants(node->udev)) {
+			power_off = false;
+			break;
+		}
+	}
+
+	mutex_unlock(&hub->lock);
+
+	if (!power_off)
+		return 0;
+
+	return onboard_hub_power_off(hub);
+}
+
+static int __maybe_unused onboard_hub_resume(struct device *dev)
+{
+	struct onboard_hub *hub = dev_get_drvdata(dev);
+
+	if (hub->is_powered_on)
+		return 0;
+
+	return onboard_hub_power_on(hub);
+}
+
+static inline void get_udev_link_name(const struct usb_device *udev, char *buf, size_t size)
+{
+	snprintf(buf, size, "usb_dev.%s", dev_name(&udev->dev));
+}
+
+static int onboard_hub_add_usbdev(struct onboard_hub *hub, struct usb_device *udev)
+{
+	struct usbdev_node *node;
+	char link_name[64];
+	int err;
+
+	mutex_lock(&hub->lock);
+
+	if (hub->going_away) {
+		err = -EINVAL;
+		goto error;
+	}
+
+	node = kzalloc(sizeof(*node), GFP_KERNEL);
+	if (!node) {
+		err = -ENOMEM;
+		goto error;
+	}
+
+	node->udev = udev;
+
+	list_add(&node->list, &hub->udev_list);
+
+	mutex_unlock(&hub->lock);
+
+	get_udev_link_name(udev, link_name, sizeof(link_name));
+	WARN_ON(sysfs_create_link(&hub->dev->kobj, &udev->dev.kobj, link_name));
+
+	return 0;
+
+error:
+	mutex_unlock(&hub->lock);
+
+	return err;
+}
+
+static void onboard_hub_remove_usbdev(struct onboard_hub *hub, const struct usb_device *udev)
+{
+	struct usbdev_node *node;
+	char link_name[64];
+
+	get_udev_link_name(udev, link_name, sizeof(link_name));
+	sysfs_remove_link(&hub->dev->kobj, link_name);
+
+	mutex_lock(&hub->lock);
+
+	list_for_each_entry(node, &hub->udev_list, list) {
+		if (node->udev == udev) {
+			list_del(&node->list);
+			kfree(node);
+			break;
+		}
+	}
+
+	mutex_unlock(&hub->lock);
+}
+
+static ssize_t always_powered_in_suspend_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	const struct onboard_hub *hub = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%d\n", hub->always_powered_in_suspend);
+}
+
+static ssize_t always_powered_in_suspend_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct onboard_hub *hub = dev_get_drvdata(dev);
+	bool val;
+	int ret;
+
+	ret = kstrtobool(buf, &val);
+	if (ret < 0)
+		return ret;
+
+	hub->always_powered_in_suspend = val;
+
+	return count;
+}
+static DEVICE_ATTR_RW(always_powered_in_suspend);
+
+static struct attribute *onboard_hub_attrs[] = {
+	&dev_attr_always_powered_in_suspend.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(onboard_hub);
+
+static void onboard_hub_attach_usb_driver(struct work_struct *work)
+{
+	int err;
+
+	err = driver_attach(&onboard_hub_usbdev_driver.drvwrap.driver);
+	if (err)
+		pr_err("Failed to attach USB driver: %d\n", err);
+}
+
+static int onboard_hub_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id;
+	struct device *dev = &pdev->dev;
+	struct onboard_hub *hub;
+	int err;
+
+	hub = devm_kzalloc(dev, sizeof(*hub), GFP_KERNEL);
+	if (!hub)
+		return -ENOMEM;
+
+	of_id = of_match_device(onboard_hub_match, &pdev->dev);
+	if (!of_id)
+		return -ENODEV;
+
+	hub->pdata = of_id->data;
+	if (!hub->pdata)
+		return -EINVAL;
+
+	hub->vdd = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(hub->vdd))
+		return PTR_ERR(hub->vdd);
+
+	hub->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+						  GPIOD_OUT_HIGH);
+	if (IS_ERR(hub->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(hub->reset_gpio), "failed to get reset GPIO\n");
+
+	hub->dev = dev;
+	mutex_init(&hub->lock);
+	INIT_LIST_HEAD(&hub->udev_list);
+
+	dev_set_drvdata(dev, hub);
+
+	err = onboard_hub_power_on(hub);
+	if (err)
+		return err;
+
+	/*
+	 * The USB driver might have been detached from the USB devices by
+	 * onboard_hub_remove() (e.g. through an 'unbind' by userspace),
+	 * make sure to re-attach it if needed.
+	 *
+	 * This needs to be done deferred to avoid self-deadlocks on systems
+	 * with nested onboard hubs.
+	 */
+	schedule_work(&attach_usb_driver_work);
+
+	return 0;
+}
+
+static int onboard_hub_remove(struct platform_device *pdev)
+{
+	struct onboard_hub *hub = dev_get_drvdata(&pdev->dev);
+	struct usbdev_node *node;
+	struct usb_device *udev;
+
+	hub->going_away = true;
+
+	mutex_lock(&hub->lock);
+
+	/* unbind the USB devices to avoid dangling references to this device */
+	while (!list_empty(&hub->udev_list)) {
+		node = list_first_entry(&hub->udev_list, struct usbdev_node, list);
+		udev = node->udev;
+
+		/*
+		 * Unbinding the driver will call onboard_hub_remove_usbdev(),
+		 * which acquires hub->lock.  We must release the lock first.
+		 */
+		get_device(&udev->dev);
+		mutex_unlock(&hub->lock);
+		device_release_driver(&udev->dev);
+		put_device(&udev->dev);
+		mutex_lock(&hub->lock);
+	}
+
+	mutex_unlock(&hub->lock);
+
+	return onboard_hub_power_off(hub);
+}
+
+MODULE_DEVICE_TABLE(of, onboard_hub_match);
+
+static const struct dev_pm_ops __maybe_unused onboard_hub_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(onboard_hub_suspend, onboard_hub_resume)
+};
+
+static struct platform_driver onboard_hub_driver = {
+	.probe = onboard_hub_probe,
+	.remove = onboard_hub_remove,
+
+	.driver = {
+		.name = "onboard-usb-hub",
+		.of_match_table = onboard_hub_match,
+		.pm = pm_ptr(&onboard_hub_pm_ops),
+		.dev_groups = onboard_hub_groups,
+	},
+};
+
+/************************** USB driver **************************/
+
+#define VENDOR_ID_GENESYS	0x05e3
+#define VENDOR_ID_MICROCHIP	0x0424
+#define VENDOR_ID_REALTEK	0x0bda
+#define VENDOR_ID_TI		0x0451
+
+/*
+ * Returns the onboard_hub platform device that is associated with the USB
+ * device passed as parameter.
+ */
+static struct onboard_hub *_find_onboard_hub(struct device *dev)
+{
+	struct platform_device *pdev;
+	struct device_node *np;
+	struct onboard_hub *hub;
+
+	pdev = of_find_device_by_node(dev->of_node);
+	if (!pdev) {
+		np = of_parse_phandle(dev->of_node, "peer-hub", 0);
+		if (!np) {
+			dev_err(dev, "failed to find device node for peer hub\n");
+			return ERR_PTR(-EINVAL);
+		}
+
+		pdev = of_find_device_by_node(np);
+		of_node_put(np);
+
+		if (!pdev)
+			return ERR_PTR(-ENODEV);
+	}
+
+	hub = dev_get_drvdata(&pdev->dev);
+	put_device(&pdev->dev);
+
+	/*
+	 * The presence of drvdata ('hub') indicates that the platform driver
+	 * finished probing. This handles the case where (conceivably) we could
+	 * be running at the exact same time as the platform driver's probe. If
+	 * we detect the race we request probe deferral and we'll come back and
+	 * try again.
+	 */
+	if (!hub)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	return hub;
+}
+
+static int onboard_hub_usbdev_probe(struct usb_device *udev)
+{
+	struct device *dev = &udev->dev;
+	struct onboard_hub *hub;
+	int err;
+
+	/* ignore supported hubs without device tree node */
+	if (!dev->of_node)
+		return -ENODEV;
+
+	hub = _find_onboard_hub(dev);
+	if (IS_ERR(hub))
+		return PTR_ERR(hub);
+
+	dev_set_drvdata(dev, hub);
+
+	err = onboard_hub_add_usbdev(hub, udev);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static void onboard_hub_usbdev_disconnect(struct usb_device *udev)
+{
+	struct onboard_hub *hub = dev_get_drvdata(&udev->dev);
+
+	onboard_hub_remove_usbdev(hub, udev);
+}
+
+static const struct usb_device_id onboard_hub_id_table[] = {
+	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */
+	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 */
+	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0620) }, /* Genesys Logic GL3523 USB 3.1 */
+	{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2412) }, /* USB2412 USB 2.0 */
+	{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2514) }, /* USB2514B USB 2.0 */
+	{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2517) }, /* USB2517 USB 2.0 */
+	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 */
+	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */
+	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */
+	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */
+	{ USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */
+	{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
+	{}
+};
+MODULE_DEVICE_TABLE(usb, onboard_hub_id_table);
+
+static struct usb_device_driver onboard_hub_usbdev_driver = {
+	.name = "onboard-usb-hub",
+	.probe = onboard_hub_usbdev_probe,
+	.disconnect = onboard_hub_usbdev_disconnect,
+	.generic_subclass = 1,
+	.supports_autosuspend =	1,
+	.id_table = onboard_hub_id_table,
+};
+
+static int __init onboard_hub_init(void)
+{
+	int ret;
+
+	ret = usb_register_device_driver(&onboard_hub_usbdev_driver, THIS_MODULE);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&onboard_hub_driver);
+	if (ret)
+		usb_deregister_device_driver(&onboard_hub_usbdev_driver);
+
+	return ret;
+}
+module_init(onboard_hub_init);
+
+static void __exit onboard_hub_exit(void)
+{
+	usb_deregister_device_driver(&onboard_hub_usbdev_driver);
+	platform_driver_unregister(&onboard_hub_driver);
+
+	cancel_work_sync(&attach_usb_driver_work);
+}
+module_exit(onboard_hub_exit);
+
+MODULE_AUTHOR("Matthias Kaehlcke <mka@chromium.org>");
+MODULE_DESCRIPTION("Driver for discrete onboard USB hubs");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
new file mode 100644
index 000000000..d023fb90b
--- /dev/null
+++ b/drivers/usb/misc/onboard_usb_hub.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2022, Google LLC
+ */
+
+#ifndef _USB_MISC_ONBOARD_USB_HUB_H
+#define _USB_MISC_ONBOARD_USB_HUB_H
+
+struct onboard_hub_pdata {
+	unsigned long reset_us;		/* reset pulse width in us */
+};
+
+static const struct onboard_hub_pdata microchip_usb424_data = {
+	.reset_us = 1,
+};
+
+static const struct onboard_hub_pdata realtek_rts5411_data = {
+	.reset_us = 0,
+};
+
+static const struct onboard_hub_pdata ti_tusb8041_data = {
+	.reset_us = 3000,
+};
+
+static const struct onboard_hub_pdata genesys_gl850g_data = {
+	.reset_us = 3,
+};
+
+static const struct onboard_hub_pdata genesys_gl852g_data = {
+	.reset_us = 50,
+};
+
+static const struct of_device_id onboard_hub_match[] = {
+	{ .compatible = "usb424,2412", .data = &microchip_usb424_data, },
+	{ .compatible = "usb424,2514", .data = &microchip_usb424_data, },
+	{ .compatible = "usb424,2517", .data = &microchip_usb424_data, },
+	{ .compatible = "usb451,8140", .data = &ti_tusb8041_data, },
+	{ .compatible = "usb451,8142", .data = &ti_tusb8041_data, },
+	{ .compatible = "usb5e3,608", .data = &genesys_gl850g_data, },
+	{ .compatible = "usb5e3,610", .data = &genesys_gl852g_data, },
+	{ .compatible = "usb5e3,620", .data = &genesys_gl852g_data, },
+	{ .compatible = "usbbda,411", .data = &realtek_rts5411_data, },
+	{ .compatible = "usbbda,5411", .data = &realtek_rts5411_data, },
+	{ .compatible = "usbbda,414", .data = &realtek_rts5411_data, },
+	{ .compatible = "usbbda,5414", .data = &realtek_rts5411_data, },
+	{}
+};
+
+#endif /* _USB_MISC_ONBOARD_USB_HUB_H */
diff --git a/drivers/usb/misc/onboard_usb_hub_pdevs.c b/drivers/usb/misc/onboard_usb_hub_pdevs.c
new file mode 100644
index 000000000..ed22a18f4
--- /dev/null
+++ b/drivers/usb/misc/onboard_usb_hub_pdevs.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * API for creating and destroying USB onboard hub platform devices
+ *
+ * Copyright (c) 2022, Google LLC
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/of.h>
+#include <linux/usb/onboard_hub.h>
+
+#include "onboard_usb_hub.h"
+
+struct pdev_list_entry {
+	struct platform_device *pdev;
+	struct list_head node;
+};
+
+static bool of_is_onboard_usb_hub(const struct device_node *np)
+{
+	return !!of_match_node(onboard_hub_match, np);
+}
+
+/**
+ * onboard_hub_create_pdevs -- create platform devices for onboard USB hubs
+ * @parent_hub	: parent hub to scan for connected onboard hubs
+ * @pdev_list	: list of onboard hub platform devices owned by the parent hub
+ *
+ * Creates a platform device for each supported onboard hub that is connected to
+ * the given parent hub. The platform device is in charge of initializing the
+ * hub (enable regulators, take the hub out of reset, ...) and can optionally
+ * control whether the hub remains powered during system suspend or not.
+ *
+ * To keep track of the platform devices they are added to a list that is owned
+ * by the parent hub.
+ *
+ * Some background about the logic in this function, which can be a bit hard
+ * to follow:
+ *
+ * Root hubs don't have dedicated device tree nodes, but use the node of their
+ * HCD. The primary and secondary HCD are usually represented by a single DT
+ * node. That means the root hubs of the primary and secondary HCD share the
+ * same device tree node (the HCD node). As a result this function can be called
+ * twice with the same DT node for root hubs. We only want to create a single
+ * platform device for each physical onboard hub, hence for root hubs the loop
+ * is only executed for the root hub of the primary HCD. Since the function
+ * scans through all child nodes it still creates pdevs for onboard hubs
+ * connected to the root hub of the secondary HCD if needed.
+ *
+ * Further there must be only one platform device for onboard hubs with a peer
+ * hub (the hub is a single physical device). To achieve this two measures are
+ * taken: pdevs for onboard hubs with a peer are only created when the function
+ * is called on behalf of the parent hub that is connected to the primary HCD
+ * (directly or through other hubs). For onboard hubs connected to root hubs
+ * the function processes the nodes of both peers. A platform device is only
+ * created if the peer hub doesn't have one already.
+ */
+void onboard_hub_create_pdevs(struct usb_device *parent_hub, struct list_head *pdev_list)
+{
+	int i;
+	struct usb_hcd *hcd = bus_to_hcd(parent_hub->bus);
+	struct device_node *np, *npc;
+	struct platform_device *pdev;
+	struct pdev_list_entry *pdle;
+
+	if (!parent_hub->dev.of_node)
+		return;
+
+	if (!parent_hub->parent && !usb_hcd_is_primary_hcd(hcd))
+		return;
+
+	for (i = 1; i <= parent_hub->maxchild; i++) {
+		np = usb_of_get_device_node(parent_hub, i);
+		if (!np)
+			continue;
+
+		if (!of_is_onboard_usb_hub(np))
+			goto node_put;
+
+		npc = of_parse_phandle(np, "peer-hub", 0);
+		if (npc) {
+			if (!usb_hcd_is_primary_hcd(hcd)) {
+				of_node_put(npc);
+				goto node_put;
+			}
+
+			pdev = of_find_device_by_node(npc);
+			of_node_put(npc);
+
+			if (pdev) {
+				put_device(&pdev->dev);
+				goto node_put;
+			}
+		}
+
+		pdev = of_platform_device_create(np, NULL, &parent_hub->dev);
+		if (!pdev) {
+			dev_err(&parent_hub->dev,
+				"failed to create platform device for onboard hub '%pOF'\n", np);
+			goto node_put;
+		}
+
+		pdle = kzalloc(sizeof(*pdle), GFP_KERNEL);
+		if (!pdle) {
+			of_platform_device_destroy(&pdev->dev, NULL);
+			goto node_put;
+		}
+
+		pdle->pdev = pdev;
+		list_add(&pdle->node, pdev_list);
+
+node_put:
+		of_node_put(np);
+	}
+}
+EXPORT_SYMBOL_GPL(onboard_hub_create_pdevs);
+
+/**
+ * onboard_hub_destroy_pdevs -- free resources of onboard hub platform devices
+ * @pdev_list	: list of onboard hub platform devices
+ *
+ * Destroys the platform devices in the given list and frees the memory associated
+ * with the list entry.
+ */
+void onboard_hub_destroy_pdevs(struct list_head *pdev_list)
+{
+	struct pdev_list_entry *pdle, *tmp;
+
+	list_for_each_entry_safe(pdle, tmp, pdev_list, node) {
+		list_del(&pdle->node);
+		of_platform_device_destroy(&pdle->pdev->dev, NULL);
+		kfree(pdle);
+	}
+}
+EXPORT_SYMBOL_GPL(onboard_hub_destroy_pdevs);
diff --git a/drivers/usb/misc/qcom_eud.c b/drivers/usb/misc/qcom_eud.c
new file mode 100644
index 000000000..b7f13df00
--- /dev/null
+++ b/drivers/usb/misc/qcom_eud.c
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015-2021, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/usb/role.h>
+
+#define EUD_REG_INT1_EN_MASK	0x0024
+#define EUD_REG_INT_STATUS_1	0x0044
+#define EUD_REG_CTL_OUT_1	0x0074
+#define EUD_REG_VBUS_INT_CLR	0x0080
+#define EUD_REG_CSR_EUD_EN	0x1014
+#define EUD_REG_SW_ATTACH_DET	0x1018
+#define EUD_REG_EUD_EN2        0x0000
+
+#define EUD_ENABLE		BIT(0)
+#define EUD_INT_PET_EUD	BIT(0)
+#define EUD_INT_VBUS		BIT(2)
+#define EUD_INT_SAFE_MODE	BIT(4)
+#define EUD_INT_ALL		(EUD_INT_VBUS | EUD_INT_SAFE_MODE)
+
+struct eud_chip {
+	struct device			*dev;
+	struct usb_role_switch		*role_sw;
+	void __iomem			*base;
+	void __iomem			*mode_mgr;
+	unsigned int			int_status;
+	int				irq;
+	bool				enabled;
+	bool				usb_attached;
+};
+
+static int enable_eud(struct eud_chip *priv)
+{
+	writel(EUD_ENABLE, priv->base + EUD_REG_CSR_EUD_EN);
+	writel(EUD_INT_VBUS | EUD_INT_SAFE_MODE,
+			priv->base + EUD_REG_INT1_EN_MASK);
+	writel(1, priv->mode_mgr + EUD_REG_EUD_EN2);
+
+	return usb_role_switch_set_role(priv->role_sw, USB_ROLE_DEVICE);
+}
+
+static void disable_eud(struct eud_chip *priv)
+{
+	writel(0, priv->base + EUD_REG_CSR_EUD_EN);
+	writel(0, priv->mode_mgr + EUD_REG_EUD_EN2);
+}
+
+static ssize_t enable_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct eud_chip *chip = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%d\n", chip->enabled);
+}
+
+static ssize_t enable_store(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct eud_chip *chip = dev_get_drvdata(dev);
+	bool enable;
+	int ret;
+
+	if (kstrtobool(buf, &enable))
+		return -EINVAL;
+
+	if (enable) {
+		ret = enable_eud(chip);
+		if (!ret)
+			chip->enabled = enable;
+		else
+			disable_eud(chip);
+	} else {
+		disable_eud(chip);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(enable);
+
+static struct attribute *eud_attrs[] = {
+	&dev_attr_enable.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(eud);
+
+static void usb_attach_detach(struct eud_chip *chip)
+{
+	u32 reg;
+
+	/* read ctl_out_1[4] to find USB attach or detach event */
+	reg = readl(chip->base + EUD_REG_CTL_OUT_1);
+	chip->usb_attached = reg & EUD_INT_SAFE_MODE;
+}
+
+static void pet_eud(struct eud_chip *chip)
+{
+	u32 reg;
+	int ret;
+
+	/* When the EUD_INT_PET_EUD in SW_ATTACH_DET is set, the cable has been
+	 * disconnected and we need to detach the pet to check if EUD is in safe
+	 * mode before attaching again.
+	 */
+	reg = readl(chip->base + EUD_REG_SW_ATTACH_DET);
+	if (reg & EUD_INT_PET_EUD) {
+		/* Detach & Attach pet for EUD */
+		writel(0, chip->base + EUD_REG_SW_ATTACH_DET);
+		/* Delay to make sure detach pet is done before attach pet */
+		ret = readl_poll_timeout(chip->base + EUD_REG_SW_ATTACH_DET,
+					reg, (reg == 0), 1, 100);
+		if (ret) {
+			dev_err(chip->dev, "Detach pet failed\n");
+			return;
+		}
+	}
+	/* Attach pet for EUD */
+	writel(EUD_INT_PET_EUD, chip->base + EUD_REG_SW_ATTACH_DET);
+}
+
+static irqreturn_t handle_eud_irq(int irq, void *data)
+{
+	struct eud_chip *chip = data;
+	u32 reg;
+
+	reg = readl(chip->base + EUD_REG_INT_STATUS_1);
+	switch (reg & EUD_INT_ALL) {
+	case EUD_INT_VBUS:
+		usb_attach_detach(chip);
+		return IRQ_WAKE_THREAD;
+	case EUD_INT_SAFE_MODE:
+		pet_eud(chip);
+		return IRQ_HANDLED;
+	default:
+		return IRQ_NONE;
+	}
+}
+
+static irqreturn_t handle_eud_irq_thread(int irq, void *data)
+{
+	struct eud_chip *chip = data;
+	int ret;
+
+	if (chip->usb_attached)
+		ret = usb_role_switch_set_role(chip->role_sw, USB_ROLE_DEVICE);
+	else
+		ret = usb_role_switch_set_role(chip->role_sw, USB_ROLE_HOST);
+	if (ret)
+		dev_err(chip->dev, "failed to set role switch\n");
+
+	/* set and clear vbus_int_clr[0] to clear interrupt */
+	writel(BIT(0), chip->base + EUD_REG_VBUS_INT_CLR);
+	writel(0, chip->base + EUD_REG_VBUS_INT_CLR);
+
+	return IRQ_HANDLED;
+}
+
+static void eud_role_switch_release(void *data)
+{
+	struct eud_chip *chip = data;
+
+	usb_role_switch_put(chip->role_sw);
+}
+
+static int eud_probe(struct platform_device *pdev)
+{
+	struct eud_chip *chip;
+	int ret;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = &pdev->dev;
+
+	chip->role_sw = usb_role_switch_get(&pdev->dev);
+	if (IS_ERR(chip->role_sw))
+		return dev_err_probe(chip->dev, PTR_ERR(chip->role_sw),
+					"failed to get role switch\n");
+
+	ret = devm_add_action_or_reset(chip->dev, eud_role_switch_release, chip);
+	if (ret)
+		return dev_err_probe(chip->dev, ret,
+				"failed to add role switch release action\n");
+
+	chip->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(chip->base))
+		return PTR_ERR(chip->base);
+
+	chip->mode_mgr = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(chip->mode_mgr))
+		return PTR_ERR(chip->mode_mgr);
+
+	chip->irq = platform_get_irq(pdev, 0);
+	ret = devm_request_threaded_irq(&pdev->dev, chip->irq, handle_eud_irq,
+			handle_eud_irq_thread, IRQF_ONESHOT, NULL, chip);
+	if (ret)
+		return dev_err_probe(chip->dev, ret, "failed to allocate irq\n");
+
+	enable_irq_wake(chip->irq);
+
+	platform_set_drvdata(pdev, chip);
+
+	return 0;
+}
+
+static int eud_remove(struct platform_device *pdev)
+{
+	struct eud_chip *chip = platform_get_drvdata(pdev);
+
+	if (chip->enabled)
+		disable_eud(chip);
+
+	device_init_wakeup(&pdev->dev, false);
+	disable_irq_wake(chip->irq);
+
+	return 0;
+}
+
+static const struct of_device_id eud_dt_match[] = {
+	{ .compatible = "qcom,sc7280-eud" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, eud_dt_match);
+
+static struct platform_driver eud_driver = {
+	.probe	= eud_probe,
+	.remove	= eud_remove,
+	.driver	= {
+		.name = "qcom_eud",
+		.dev_groups = eud_groups,
+		.of_match_table = eud_dt_match,
+	},
+};
+module_platform_driver(eud_driver);
+
+MODULE_DESCRIPTION("QTI EUD driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig
new file mode 100644
index 000000000..c12cdd015
--- /dev/null
+++ b/drivers/usb/misc/sisusbvga/Kconfig
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config USB_SISUSBVGA
+	tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)"
+	depends on (USB_MUSB_HDRC || USB_EHCI_HCD)
+	select FONT_SUPPORT if USB_SISUSBVGA_CON
+	help
+	  Say Y here if you intend to attach a USB2VGA dongle based on a
+	  Net2280 and a SiS315 chip.
+
+	  Note that this device requires a USB 2.0 host controller. It will not
+	  work with USB 1.x controllers.
+
+	  To compile this driver as a module, choose M here; the module will be
+	  called sisusbvga. If unsure, say N.
+
+config USB_SISUSBVGA_CON
+	bool "Text console and mode switching support" if USB_SISUSBVGA
+	depends on VT && BROKEN
+	select FONT_8x16
+	help
+	  Say Y here if you want a VGA text console via the USB dongle or
+	  want to support userland applications that utilize the driver's
+	  display mode switching capabilities.
+
+	  Note that this console supports VGA/EGA text mode only.
+
+	  By default, the console part of the driver will not kick in when
+	  the driver is initialized. If you want the driver to take over
+	  one or more of the consoles, you need to specify the number of
+	  the first and last consoles (starting at 1) as driver parameters.
+
+	  For example, if the driver is compiled as a module:
+
+	     modprobe sisusbvga first=1 last=5
+
+	  If you use hotplug, add this to your modutils config files with
+	  the "options" keyword, such as eg.
+
+	     options sisusbvga first=1 last=5
+
+	  If the driver is compiled into the kernel image, the parameters
+	  must be given in the kernel command like, such as
+
+	     sisusbvga.first=1 sisusbvga.last=5
+
+
+
diff --git a/drivers/usb/misc/sisusbvga/Makefile b/drivers/usb/misc/sisusbvga/Makefile
new file mode 100644
index 000000000..6551bce68
--- /dev/null
+++ b/drivers/usb/misc/sisusbvga/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the sisusb driver (if driver is inside kernel tree).
+#
+
+obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga.o
+
+sisusbvga-y := sisusb.o
+sisusbvga-$(CONFIG_USB_SISUSBVGA_CON) += sisusb_con.o sisusb_init.o
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
new file mode 100644
index 000000000..8ed803c4a
--- /dev/null
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -0,0 +1,3244 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles
+ *
+ * Main part
+ *
+ * Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria
+ *
+ * If distributed as part of the Linux kernel, this code is licensed under the
+ * terms of the GPL v2.
+ *
+ * Otherwise, the following license terms apply:
+ *
+ * * Redistribution and use in source and binary forms, with or without
+ * * modification, are permitted provided that the following conditions
+ * * are met:
+ * * 1) Redistributions of source code must retain the above copyright
+ * *    notice, this list of conditions and the following disclaimer.
+ * * 2) Redistributions in binary form must reproduce the above copyright
+ * *    notice, this list of conditions and the following disclaimer in the
+ * *    documentation and/or other materials provided with the distribution.
+ * * 3) The name of the author may not be used to endorse or promote products
+ * *    derived from this software without specific psisusbr written permission.
+ * *
+ * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR
+ * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Author:	Thomas Winischhofer <thomas@winischhofer.net>
+ *
+ */
+
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/kref.h>
+#include <linux/usb.h>
+#include <linux/vmalloc.h>
+
+#include "sisusb.h"
+#include "sisusb_init.h"
+
+#ifdef CONFIG_USB_SISUSBVGA_CON
+#include <linux/font.h>
+#endif
+
+#define SISUSB_DONTSYNC
+
+/* Forward declarations / clean-up routines */
+
+#ifdef CONFIG_USB_SISUSBVGA_CON
+static int sisusb_first_vc;
+static int sisusb_last_vc;
+module_param_named(first, sisusb_first_vc, int, 0);
+module_param_named(last, sisusb_last_vc, int, 0);
+MODULE_PARM_DESC(first, "Number of first console to take over (1 - MAX_NR_CONSOLES)");
+MODULE_PARM_DESC(last, "Number of last console to take over (1 - MAX_NR_CONSOLES)");
+#endif
+
+static struct usb_driver sisusb_driver;
+
+static void sisusb_free_buffers(struct sisusb_usb_data *sisusb)
+{
+	int i;
+
+	for (i = 0; i < NUMOBUFS; i++) {
+		kfree(sisusb->obuf[i]);
+		sisusb->obuf[i] = NULL;
+	}
+	kfree(sisusb->ibuf);
+	sisusb->ibuf = NULL;
+}
+
+static void sisusb_free_urbs(struct sisusb_usb_data *sisusb)
+{
+	int i;
+
+	for (i = 0; i < NUMOBUFS; i++) {
+		usb_free_urb(sisusb->sisurbout[i]);
+		sisusb->sisurbout[i] = NULL;
+	}
+	usb_free_urb(sisusb->sisurbin);
+	sisusb->sisurbin = NULL;
+}
+
+/* Level 0: USB transport layer */
+
+/* 1. out-bulks */
+
+/* out-urb management */
+
+/* Return 1 if all free, 0 otherwise */
+static int sisusb_all_free(struct sisusb_usb_data *sisusb)
+{
+	int i;
+
+	for (i = 0; i < sisusb->numobufs; i++) {
+
+		if (sisusb->urbstatus[i] & SU_URB_BUSY)
+			return 0;
+
+	}
+
+	return 1;
+}
+
+/* Kill all busy URBs */
+static void sisusb_kill_all_busy(struct sisusb_usb_data *sisusb)
+{
+	int i;
+
+	if (sisusb_all_free(sisusb))
+		return;
+
+	for (i = 0; i < sisusb->numobufs; i++) {
+
+		if (sisusb->urbstatus[i] & SU_URB_BUSY)
+			usb_kill_urb(sisusb->sisurbout[i]);
+
+	}
+}
+
+/* Return 1 if ok, 0 if error (not all complete within timeout) */
+static int sisusb_wait_all_out_complete(struct sisusb_usb_data *sisusb)
+{
+	int timeout = 5 * HZ, i = 1;
+
+	wait_event_timeout(sisusb->wait_q, (i = sisusb_all_free(sisusb)),
+			timeout);
+
+	return i;
+}
+
+static int sisusb_outurb_available(struct sisusb_usb_data *sisusb)
+{
+	int i;
+
+	for (i = 0; i < sisusb->numobufs; i++) {
+
+		if ((sisusb->urbstatus[i] & (SU_URB_BUSY|SU_URB_ALLOC)) == 0)
+			return i;
+
+	}
+
+	return -1;
+}
+
+static int sisusb_get_free_outbuf(struct sisusb_usb_data *sisusb)
+{
+	int i, timeout = 5 * HZ;
+
+	wait_event_timeout(sisusb->wait_q,
+			((i = sisusb_outurb_available(sisusb)) >= 0), timeout);
+
+	return i;
+}
+
+static int sisusb_alloc_outbuf(struct sisusb_usb_data *sisusb)
+{
+	int i;
+
+	i = sisusb_outurb_available(sisusb);
+
+	if (i >= 0)
+		sisusb->urbstatus[i] |= SU_URB_ALLOC;
+
+	return i;
+}
+
+static void sisusb_free_outbuf(struct sisusb_usb_data *sisusb, int index)
+{
+	if ((index >= 0) && (index < sisusb->numobufs))
+		sisusb->urbstatus[index] &= ~SU_URB_ALLOC;
+}
+
+/* completion callback */
+
+static void sisusb_bulk_completeout(struct urb *urb)
+{
+	struct sisusb_urb_context *context = urb->context;
+	struct sisusb_usb_data *sisusb;
+
+	if (!context)
+		return;
+
+	sisusb = context->sisusb;
+
+	if (!sisusb || !sisusb->sisusb_dev || !sisusb->present)
+		return;
+
+#ifndef SISUSB_DONTSYNC
+	if (context->actual_length)
+		*(context->actual_length) += urb->actual_length;
+#endif
+
+	sisusb->urbstatus[context->urbindex] &= ~SU_URB_BUSY;
+	wake_up(&sisusb->wait_q);
+}
+
+static int sisusb_bulkout_msg(struct sisusb_usb_data *sisusb, int index,
+		unsigned int pipe, void *data, int len, int *actual_length,
+		int timeout, unsigned int tflags)
+{
+	struct urb *urb = sisusb->sisurbout[index];
+	int retval, byteswritten = 0;
+
+	/* Set up URB */
+	urb->transfer_flags = 0;
+
+	usb_fill_bulk_urb(urb, sisusb->sisusb_dev, pipe, data, len,
+			sisusb_bulk_completeout,
+			&sisusb->urbout_context[index]);
+
+	urb->transfer_flags |= tflags;
+	urb->actual_length = 0;
+
+	/* Set up context */
+	sisusb->urbout_context[index].actual_length = (timeout) ?
+			NULL : actual_length;
+
+	/* Declare this urb/buffer in use */
+	sisusb->urbstatus[index] |= SU_URB_BUSY;
+
+	/* Submit URB */
+	retval = usb_submit_urb(urb, GFP_KERNEL);
+
+	/* If OK, and if timeout > 0, wait for completion */
+	if ((retval == 0) && timeout) {
+		wait_event_timeout(sisusb->wait_q,
+				(!(sisusb->urbstatus[index] & SU_URB_BUSY)),
+				timeout);
+		if (sisusb->urbstatus[index] & SU_URB_BUSY) {
+			/* URB timed out... kill it and report error */
+			usb_kill_urb(urb);
+			retval = -ETIMEDOUT;
+		} else {
+			/* Otherwise, report urb status */
+			retval = urb->status;
+			byteswritten = urb->actual_length;
+		}
+	}
+
+	if (actual_length)
+		*actual_length = byteswritten;
+
+	return retval;
+}
+
+/* 2. in-bulks */
+
+/* completion callback */
+
+static void sisusb_bulk_completein(struct urb *urb)
+{
+	struct sisusb_usb_data *sisusb = urb->context;
+
+	if (!sisusb || !sisusb->sisusb_dev || !sisusb->present)
+		return;
+
+	sisusb->completein = 1;
+	wake_up(&sisusb->wait_q);
+}
+
+static int sisusb_bulkin_msg(struct sisusb_usb_data *sisusb,
+		unsigned int pipe, void *data, int len,
+		int *actual_length, int timeout, unsigned int tflags)
+{
+	struct urb *urb = sisusb->sisurbin;
+	int retval, readbytes = 0;
+
+	urb->transfer_flags = 0;
+
+	usb_fill_bulk_urb(urb, sisusb->sisusb_dev, pipe, data, len,
+			sisusb_bulk_completein, sisusb);
+
+	urb->transfer_flags |= tflags;
+	urb->actual_length = 0;
+
+	sisusb->completein = 0;
+	retval = usb_submit_urb(urb, GFP_KERNEL);
+	if (retval == 0) {
+		wait_event_timeout(sisusb->wait_q, sisusb->completein, timeout);
+		if (!sisusb->completein) {
+			/* URB timed out... kill it and report error */
+			usb_kill_urb(urb);
+			retval = -ETIMEDOUT;
+		} else {
+			/* URB completed within timeout */
+			retval = urb->status;
+			readbytes = urb->actual_length;
+		}
+	}
+
+	if (actual_length)
+		*actual_length = readbytes;
+
+	return retval;
+}
+
+
+/* Level 1:  */
+
+/* Send a bulk message of variable size
+ *
+ * To copy the data from userspace, give pointer to "userbuffer",
+ * to copy from (non-DMA) kernel memory, give "kernbuffer". If
+ * both of these are NULL, it is assumed, that the transfer
+ * buffer "sisusb->obuf[index]" is set up with the data to send.
+ * Index is ignored if either kernbuffer or userbuffer is set.
+ * If async is nonzero, URBs will be sent without waiting for
+ * completion of the previous URB.
+ *
+ * (return 0 on success)
+ */
+
+static int sisusb_send_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len,
+		char *kernbuffer, const char __user *userbuffer, int index,
+		ssize_t *bytes_written, unsigned int tflags, int async)
+{
+	int result = 0, retry, count = len;
+	int passsize, thispass, transferred_len = 0;
+	int fromuser = (userbuffer != NULL) ? 1 : 0;
+	int fromkern = (kernbuffer != NULL) ? 1 : 0;
+	unsigned int pipe;
+	char *buffer;
+
+	(*bytes_written) = 0;
+
+	/* Sanity check */
+	if (!sisusb || !sisusb->present || !sisusb->sisusb_dev)
+		return -ENODEV;
+
+	/* If we copy data from kernel or userspace, force the
+	 * allocation of a buffer/urb. If we have the data in
+	 * the transfer buffer[index] already, reuse the buffer/URB
+	 * if the length is > buffer size. (So, transmitting
+	 * large data amounts directly from the transfer buffer
+	 * treats the buffer as a ring buffer. However, we need
+	 * to sync in this case.)
+	 */
+	if (fromuser || fromkern)
+		index = -1;
+	else if (len > sisusb->obufsize)
+		async = 0;
+
+	pipe = usb_sndbulkpipe(sisusb->sisusb_dev, ep);
+
+	do {
+		passsize = thispass = (sisusb->obufsize < count) ?
+				sisusb->obufsize : count;
+
+		if (index < 0)
+			index = sisusb_get_free_outbuf(sisusb);
+
+		if (index < 0)
+			return -EIO;
+
+		buffer = sisusb->obuf[index];
+
+		if (fromuser) {
+
+			if (copy_from_user(buffer, userbuffer, passsize))
+				return -EFAULT;
+
+			userbuffer += passsize;
+
+		} else if (fromkern) {
+
+			memcpy(buffer, kernbuffer, passsize);
+			kernbuffer += passsize;
+
+		}
+
+		retry = 5;
+		while (thispass) {
+
+			if (!sisusb->sisusb_dev)
+				return -ENODEV;
+
+			result = sisusb_bulkout_msg(sisusb, index, pipe,
+					buffer, thispass, &transferred_len,
+					async ? 0 : 5 * HZ, tflags);
+
+			if (result == -ETIMEDOUT) {
+
+				/* Will not happen if async */
+				if (!retry--)
+					return -ETIME;
+
+				continue;
+			}
+
+			if ((result == 0) && !async && transferred_len) {
+
+				thispass -= transferred_len;
+				buffer += transferred_len;
+
+			} else
+				break;
+		}
+
+		if (result)
+			return result;
+
+		(*bytes_written) += passsize;
+		count            -= passsize;
+
+		/* Force new allocation in next iteration */
+		if (fromuser || fromkern)
+			index = -1;
+
+	} while (count > 0);
+
+	if (async) {
+#ifdef SISUSB_DONTSYNC
+		(*bytes_written) = len;
+		/* Some URBs/buffers might be busy */
+#else
+		sisusb_wait_all_out_complete(sisusb);
+		(*bytes_written) = transferred_len;
+		/* All URBs and all buffers are available */
+#endif
+	}
+
+	return ((*bytes_written) == len) ? 0 : -EIO;
+}
+
+/* Receive a bulk message of variable size
+ *
+ * To copy the data to userspace, give pointer to "userbuffer",
+ * to copy to kernel memory, give "kernbuffer". One of them
+ * MUST be set. (There is no technique for letting the caller
+ * read directly from the ibuf.)
+ *
+ */
+
+static int sisusb_recv_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len,
+		void *kernbuffer, char __user *userbuffer, ssize_t *bytes_read,
+		unsigned int tflags)
+{
+	int result = 0, retry, count = len;
+	int bufsize, thispass, transferred_len;
+	unsigned int pipe;
+	char *buffer;
+
+	(*bytes_read) = 0;
+
+	/* Sanity check */
+	if (!sisusb || !sisusb->present || !sisusb->sisusb_dev)
+		return -ENODEV;
+
+	pipe = usb_rcvbulkpipe(sisusb->sisusb_dev, ep);
+	buffer = sisusb->ibuf;
+	bufsize = sisusb->ibufsize;
+
+	retry = 5;
+
+#ifdef SISUSB_DONTSYNC
+	if (!(sisusb_wait_all_out_complete(sisusb)))
+		return -EIO;
+#endif
+
+	while (count > 0) {
+
+		if (!sisusb->sisusb_dev)
+			return -ENODEV;
+
+		thispass = (bufsize < count) ? bufsize : count;
+
+		result = sisusb_bulkin_msg(sisusb, pipe, buffer, thispass,
+				&transferred_len, 5 * HZ, tflags);
+
+		if (transferred_len)
+			thispass = transferred_len;
+
+		else if (result == -ETIMEDOUT) {
+
+			if (!retry--)
+				return -ETIME;
+
+			continue;
+
+		} else
+			return -EIO;
+
+
+		if (thispass) {
+
+			(*bytes_read) += thispass;
+			count         -= thispass;
+
+			if (userbuffer) {
+
+				if (copy_to_user(userbuffer, buffer, thispass))
+					return -EFAULT;
+
+				userbuffer += thispass;
+
+			} else {
+
+				memcpy(kernbuffer, buffer, thispass);
+				kernbuffer += thispass;
+
+			}
+
+		}
+
+	}
+
+	return ((*bytes_read) == len) ? 0 : -EIO;
+}
+
+static int sisusb_send_packet(struct sisusb_usb_data *sisusb, int len,
+		struct sisusb_packet *packet)
+{
+	int ret;
+	ssize_t bytes_transferred = 0;
+	__le32 tmp;
+
+	if (len == 6)
+		packet->data = 0;
+
+#ifdef SISUSB_DONTSYNC
+	if (!(sisusb_wait_all_out_complete(sisusb)))
+		return 1;
+#endif
+
+	/* Eventually correct endianness */
+	SISUSB_CORRECT_ENDIANNESS_PACKET(packet);
+
+	/* 1. send the packet */
+	ret = sisusb_send_bulk_msg(sisusb, SISUSB_EP_GFX_OUT, len,
+			(char *)packet, NULL, 0, &bytes_transferred, 0, 0);
+
+	if ((ret == 0) && (len == 6)) {
+
+		/* 2. if packet len == 6, it means we read, so wait for 32bit
+		 *    return value and write it to packet->data
+		 */
+		ret = sisusb_recv_bulk_msg(sisusb, SISUSB_EP_GFX_IN, 4,
+				(char *)&tmp, NULL, &bytes_transferred, 0);
+
+		packet->data = le32_to_cpu(tmp);
+	}
+
+	return ret;
+}
+
+static int sisusb_send_bridge_packet(struct sisusb_usb_data *sisusb, int len,
+		struct sisusb_packet *packet, unsigned int tflags)
+{
+	int ret;
+	ssize_t bytes_transferred = 0;
+	__le32 tmp;
+
+	if (len == 6)
+		packet->data = 0;
+
+#ifdef SISUSB_DONTSYNC
+	if (!(sisusb_wait_all_out_complete(sisusb)))
+		return 1;
+#endif
+
+	/* Eventually correct endianness */
+	SISUSB_CORRECT_ENDIANNESS_PACKET(packet);
+
+	/* 1. send the packet */
+	ret = sisusb_send_bulk_msg(sisusb, SISUSB_EP_BRIDGE_OUT, len,
+			(char *)packet, NULL, 0, &bytes_transferred, tflags, 0);
+
+	if ((ret == 0) && (len == 6)) {
+
+		/* 2. if packet len == 6, it means we read, so wait for 32bit
+		 *    return value and write it to packet->data
+		 */
+		ret = sisusb_recv_bulk_msg(sisusb, SISUSB_EP_BRIDGE_IN, 4,
+				(char *)&tmp, NULL, &bytes_transferred, 0);
+
+		packet->data = le32_to_cpu(tmp);
+	}
+
+	return ret;
+}
+
+/* access video memory and mmio (return 0 on success) */
+
+/* Low level */
+
+/* The following routines assume being used to transfer byte, word,
+ * long etc.
+ * This means that
+ *   - the write routines expect "data" in machine endianness format.
+ *     The data will be converted to leXX in sisusb_xxx_packet.
+ *   - the read routines can expect read data in machine-endianess.
+ */
+
+static int sisusb_write_memio_byte(struct sisusb_usb_data *sisusb, int type,
+		u32 addr, u8 data)
+{
+	struct sisusb_packet packet;
+
+	packet.header  = (1 << (addr & 3)) | (type << 6);
+	packet.address = addr & ~3;
+	packet.data    = data << ((addr & 3) << 3);
+	return sisusb_send_packet(sisusb, 10, &packet);
+}
+
+static int sisusb_write_memio_word(struct sisusb_usb_data *sisusb, int type,
+		u32 addr, u16 data)
+{
+	struct sisusb_packet packet;
+	int ret = 0;
+
+	packet.address = addr & ~3;
+
+	switch (addr & 3) {
+	case 0:
+		packet.header = (type << 6) | 0x0003;
+		packet.data   = (u32)data;
+		ret = sisusb_send_packet(sisusb, 10, &packet);
+		break;
+	case 1:
+		packet.header = (type << 6) | 0x0006;
+		packet.data   = (u32)data << 8;
+		ret = sisusb_send_packet(sisusb, 10, &packet);
+		break;
+	case 2:
+		packet.header = (type << 6) | 0x000c;
+		packet.data   = (u32)data << 16;
+		ret = sisusb_send_packet(sisusb, 10, &packet);
+		break;
+	case 3:
+		packet.header = (type << 6) | 0x0008;
+		packet.data   = (u32)data << 24;
+		ret = sisusb_send_packet(sisusb, 10, &packet);
+		packet.header = (type << 6) | 0x0001;
+		packet.address = (addr & ~3) + 4;
+		packet.data   = (u32)data >> 8;
+		ret |= sisusb_send_packet(sisusb, 10, &packet);
+	}
+
+	return ret;
+}
+
+static int sisusb_write_memio_24bit(struct sisusb_usb_data *sisusb, int type,
+		u32 addr, u32 data)
+{
+	struct sisusb_packet packet;
+	int ret = 0;
+
+	packet.address = addr & ~3;
+
+	switch (addr & 3) {
+	case 0:
+		packet.header  = (type << 6) | 0x0007;
+		packet.data    = data & 0x00ffffff;
+		ret = sisusb_send_packet(sisusb, 10, &packet);
+		break;
+	case 1:
+		packet.header  = (type << 6) | 0x000e;
+		packet.data    = data << 8;
+		ret = sisusb_send_packet(sisusb, 10, &packet);
+		break;
+	case 2:
+		packet.header  = (type << 6) | 0x000c;
+		packet.data    = data << 16;
+		ret = sisusb_send_packet(sisusb, 10, &packet);
+		packet.header  = (type << 6) | 0x0001;
+		packet.address = (addr & ~3) + 4;
+		packet.data    = (data >> 16) & 0x00ff;
+		ret |= sisusb_send_packet(sisusb, 10, &packet);
+		break;
+	case 3:
+		packet.header  = (type << 6) | 0x0008;
+		packet.data    = data << 24;
+		ret = sisusb_send_packet(sisusb, 10, &packet);
+		packet.header  = (type << 6) | 0x0003;
+		packet.address = (addr & ~3) + 4;
+		packet.data    = (data >> 8) & 0xffff;
+		ret |= sisusb_send_packet(sisusb, 10, &packet);
+	}
+
+	return ret;
+}
+
+static int sisusb_write_memio_long(struct sisusb_usb_data *sisusb, int type,
+		u32 addr, u32 data)
+{
+	struct sisusb_packet packet;
+	int ret = 0;
+
+	packet.address = addr & ~3;
+
+	switch (addr & 3) {
+	case 0:
+		packet.header  = (type << 6) | 0x000f;
+		packet.data    = data;
+		ret = sisusb_send_packet(sisusb, 10, &packet);
+		break;
+	case 1:
+		packet.header  = (type << 6) | 0x000e;
+		packet.data    = data << 8;
+		ret = sisusb_send_packet(sisusb, 10, &packet);
+		packet.header  = (type << 6) | 0x0001;
+		packet.address = (addr & ~3) + 4;
+		packet.data    = data >> 24;
+		ret |= sisusb_send_packet(sisusb, 10, &packet);
+		break;
+	case 2:
+		packet.header  = (type << 6) | 0x000c;
+		packet.data    = data << 16;
+		ret = sisusb_send_packet(sisusb, 10, &packet);
+		packet.header  = (type << 6) | 0x0003;
+		packet.address = (addr & ~3) + 4;
+		packet.data    = data >> 16;
+		ret |= sisusb_send_packet(sisusb, 10, &packet);
+		break;
+	case 3:
+		packet.header  = (type << 6) | 0x0008;
+		packet.data    = data << 24;
+		ret = sisusb_send_packet(sisusb, 10, &packet);
+		packet.header  = (type << 6) | 0x0007;
+		packet.address = (addr & ~3) + 4;
+		packet.data    = data >> 8;
+		ret |= sisusb_send_packet(sisusb, 10, &packet);
+	}
+
+	return ret;
+}
+
+/* The xxx_bulk routines copy a buffer of variable size. They treat the
+ * buffer as chars, therefore lsb/msb has to be corrected if using the
+ * byte/word/long/etc routines for speed-up
+ *
+ * If data is from userland, set "userbuffer" (and clear "kernbuffer"),
+ * if data is in kernel space, set "kernbuffer" (and clear "userbuffer");
+ * if neither "kernbuffer" nor "userbuffer" are given, it is assumed
+ * that the data already is in the transfer buffer "sisusb->obuf[index]".
+ */
+
+static int sisusb_write_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr,
+		char *kernbuffer, int length, const char __user *userbuffer,
+		int index, ssize_t *bytes_written)
+{
+	struct sisusb_packet packet;
+	int  ret = 0;
+	static int msgcount;
+	u8   swap8, fromkern = kernbuffer ? 1 : 0;
+	u16  swap16;
+	u32  swap32, flag = (length >> 28) & 1;
+	u8 buf[4];
+
+	/* if neither kernbuffer not userbuffer are given, assume
+	 * data in obuf
+	 */
+	if (!fromkern && !userbuffer)
+		kernbuffer = sisusb->obuf[index];
+
+	(*bytes_written = 0);
+
+	length &= 0x00ffffff;
+
+	while (length) {
+		switch (length) {
+		case 1:
+			if (userbuffer) {
+				if (get_user(swap8, (u8 __user *)userbuffer))
+					return -EFAULT;
+			} else
+				swap8 = kernbuffer[0];
+
+			ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM,
+					addr, swap8);
+
+			if (!ret)
+				(*bytes_written)++;
+
+			return ret;
+
+		case 2:
+			if (userbuffer) {
+				if (get_user(swap16, (u16 __user *)userbuffer))
+					return -EFAULT;
+			} else
+				swap16 = *((u16 *)kernbuffer);
+
+			ret = sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM,
+					addr, swap16);
+
+			if (!ret)
+				(*bytes_written) += 2;
+
+			return ret;
+
+		case 3:
+			if (userbuffer) {
+				if (copy_from_user(&buf, userbuffer, 3))
+					return -EFAULT;
+#ifdef __BIG_ENDIAN
+				swap32 = (buf[0] << 16) |
+					 (buf[1] <<  8) |
+					 buf[2];
+#else
+				swap32 = (buf[2] << 16) |
+					 (buf[1] <<  8) |
+					 buf[0];
+#endif
+			} else
+#ifdef __BIG_ENDIAN
+				swap32 = (kernbuffer[0] << 16) |
+					 (kernbuffer[1] <<  8) |
+					 kernbuffer[2];
+#else
+				swap32 = (kernbuffer[2] << 16) |
+					 (kernbuffer[1] <<  8) |
+					 kernbuffer[0];
+#endif
+
+			ret = sisusb_write_memio_24bit(sisusb, SISUSB_TYPE_MEM,
+					addr, swap32);
+
+			if (!ret)
+				(*bytes_written) += 3;
+
+			return ret;
+
+		case 4:
+			if (userbuffer) {
+				if (get_user(swap32, (u32 __user *)userbuffer))
+					return -EFAULT;
+			} else
+				swap32 = *((u32 *)kernbuffer);
+
+			ret = sisusb_write_memio_long(sisusb, SISUSB_TYPE_MEM,
+					addr, swap32);
+			if (!ret)
+				(*bytes_written) += 4;
+
+			return ret;
+
+		default:
+			if ((length & ~3) > 0x10000) {
+
+				packet.header  = 0x001f;
+				packet.address = 0x000001d4;
+				packet.data    = addr;
+				ret = sisusb_send_bridge_packet(sisusb, 10,
+						&packet, 0);
+				packet.header  = 0x001f;
+				packet.address = 0x000001d0;
+				packet.data    = (length & ~3);
+				ret |= sisusb_send_bridge_packet(sisusb, 10,
+						&packet, 0);
+				packet.header  = 0x001f;
+				packet.address = 0x000001c0;
+				packet.data    = flag | 0x16;
+				ret |= sisusb_send_bridge_packet(sisusb, 10,
+						&packet, 0);
+				if (userbuffer) {
+					ret |= sisusb_send_bulk_msg(sisusb,
+							SISUSB_EP_GFX_LBULK_OUT,
+							(length & ~3),
+							NULL, userbuffer, 0,
+							bytes_written, 0, 1);
+					userbuffer += (*bytes_written);
+				} else if (fromkern) {
+					ret |= sisusb_send_bulk_msg(sisusb,
+							SISUSB_EP_GFX_LBULK_OUT,
+							(length & ~3),
+							kernbuffer, NULL, 0,
+							bytes_written, 0, 1);
+					kernbuffer += (*bytes_written);
+				} else {
+					ret |= sisusb_send_bulk_msg(sisusb,
+							SISUSB_EP_GFX_LBULK_OUT,
+							(length & ~3),
+							NULL, NULL, index,
+							bytes_written, 0, 1);
+					kernbuffer += ((*bytes_written) &
+							(sisusb->obufsize-1));
+				}
+
+			} else {
+
+				packet.header  = 0x001f;
+				packet.address = 0x00000194;
+				packet.data    = addr;
+				ret = sisusb_send_bridge_packet(sisusb, 10,
+						&packet, 0);
+				packet.header  = 0x001f;
+				packet.address = 0x00000190;
+				packet.data    = (length & ~3);
+				ret |= sisusb_send_bridge_packet(sisusb, 10,
+						&packet, 0);
+				if (sisusb->flagb0 != 0x16) {
+					packet.header  = 0x001f;
+					packet.address = 0x00000180;
+					packet.data    = flag | 0x16;
+					ret |= sisusb_send_bridge_packet(sisusb,
+							10, &packet, 0);
+					sisusb->flagb0 = 0x16;
+				}
+				if (userbuffer) {
+					ret |= sisusb_send_bulk_msg(sisusb,
+							SISUSB_EP_GFX_BULK_OUT,
+							(length & ~3),
+							NULL, userbuffer, 0,
+							bytes_written, 0, 1);
+					userbuffer += (*bytes_written);
+				} else if (fromkern) {
+					ret |= sisusb_send_bulk_msg(sisusb,
+							SISUSB_EP_GFX_BULK_OUT,
+							(length & ~3),
+							kernbuffer, NULL, 0,
+							bytes_written, 0, 1);
+					kernbuffer += (*bytes_written);
+				} else {
+					ret |= sisusb_send_bulk_msg(sisusb,
+							SISUSB_EP_GFX_BULK_OUT,
+							(length & ~3),
+							NULL, NULL, index,
+							bytes_written, 0, 1);
+					kernbuffer += ((*bytes_written) &
+							(sisusb->obufsize-1));
+				}
+			}
+			if (ret) {
+				msgcount++;
+				if (msgcount < 500)
+					dev_err(&sisusb->sisusb_dev->dev,
+							"Wrote %zd of %d bytes, error %d\n",
+							*bytes_written, length,
+							ret);
+				else if (msgcount == 500)
+					dev_err(&sisusb->sisusb_dev->dev,
+							"Too many errors, logging stopped\n");
+			}
+			addr += (*bytes_written);
+			length -= (*bytes_written);
+		}
+
+		if (ret)
+			break;
+
+	}
+
+	return ret ? -EIO : 0;
+}
+
+/* Remember: Read data in packet is in machine-endianess! So for
+ * byte, word, 24bit, long no endian correction is necessary.
+ */
+
+static int sisusb_read_memio_byte(struct sisusb_usb_data *sisusb, int type,
+		u32 addr, u8 *data)
+{
+	struct sisusb_packet packet;
+	int ret;
+
+	CLEARPACKET(&packet);
+	packet.header  = (1 << (addr & 3)) | (type << 6);
+	packet.address = addr & ~3;
+	ret = sisusb_send_packet(sisusb, 6, &packet);
+	*data = (u8)(packet.data >> ((addr & 3) << 3));
+	return ret;
+}
+
+static int sisusb_read_memio_word(struct sisusb_usb_data *sisusb, int type,
+		u32 addr, u16 *data)
+{
+	struct sisusb_packet packet;
+	int ret = 0;
+
+	CLEARPACKET(&packet);
+
+	packet.address = addr & ~3;
+
+	switch (addr & 3) {
+	case 0:
+		packet.header = (type << 6) | 0x0003;
+		ret = sisusb_send_packet(sisusb, 6, &packet);
+		*data = (u16)(packet.data);
+		break;
+	case 1:
+		packet.header = (type << 6) | 0x0006;
+		ret = sisusb_send_packet(sisusb, 6, &packet);
+		*data = (u16)(packet.data >> 8);
+		break;
+	case 2:
+		packet.header = (type << 6) | 0x000c;
+		ret = sisusb_send_packet(sisusb, 6, &packet);
+		*data = (u16)(packet.data >> 16);
+		break;
+	case 3:
+		packet.header = (type << 6) | 0x0008;
+		ret = sisusb_send_packet(sisusb, 6, &packet);
+		*data = (u16)(packet.data >> 24);
+		packet.header = (type << 6) | 0x0001;
+		packet.address = (addr & ~3) + 4;
+		ret |= sisusb_send_packet(sisusb, 6, &packet);
+		*data |= (u16)(packet.data << 8);
+	}
+
+	return ret;
+}
+
+static int sisusb_read_memio_24bit(struct sisusb_usb_data *sisusb, int type,
+		u32 addr, u32 *data)
+{
+	struct sisusb_packet packet;
+	int ret = 0;
+
+	packet.address = addr & ~3;
+
+	switch (addr & 3) {
+	case 0:
+		packet.header  = (type << 6) | 0x0007;
+		ret = sisusb_send_packet(sisusb, 6, &packet);
+		*data = packet.data & 0x00ffffff;
+		break;
+	case 1:
+		packet.header  = (type << 6) | 0x000e;
+		ret = sisusb_send_packet(sisusb, 6, &packet);
+		*data = packet.data >> 8;
+		break;
+	case 2:
+		packet.header  = (type << 6) | 0x000c;
+		ret = sisusb_send_packet(sisusb, 6, &packet);
+		*data = packet.data >> 16;
+		packet.header  = (type << 6) | 0x0001;
+		packet.address = (addr & ~3) + 4;
+		ret |= sisusb_send_packet(sisusb, 6, &packet);
+		*data |= ((packet.data & 0xff) << 16);
+		break;
+	case 3:
+		packet.header  = (type << 6) | 0x0008;
+		ret = sisusb_send_packet(sisusb, 6, &packet);
+		*data = packet.data >> 24;
+		packet.header  = (type << 6) | 0x0003;
+		packet.address = (addr & ~3) + 4;
+		ret |= sisusb_send_packet(sisusb, 6, &packet);
+		*data |= ((packet.data & 0xffff) << 8);
+	}
+
+	return ret;
+}
+
+static int sisusb_read_memio_long(struct sisusb_usb_data *sisusb, int type,
+		u32 addr, u32 *data)
+{
+	struct sisusb_packet packet;
+	int ret = 0;
+
+	packet.address = addr & ~3;
+
+	switch (addr & 3) {
+	case 0:
+		packet.header  = (type << 6) | 0x000f;
+		ret = sisusb_send_packet(sisusb, 6, &packet);
+		*data = packet.data;
+		break;
+	case 1:
+		packet.header  = (type << 6) | 0x000e;
+		ret = sisusb_send_packet(sisusb, 6, &packet);
+		*data = packet.data >> 8;
+		packet.header  = (type << 6) | 0x0001;
+		packet.address = (addr & ~3) + 4;
+		ret |= sisusb_send_packet(sisusb, 6, &packet);
+		*data |= (packet.data << 24);
+		break;
+	case 2:
+		packet.header  = (type << 6) | 0x000c;
+		ret = sisusb_send_packet(sisusb, 6, &packet);
+		*data = packet.data >> 16;
+		packet.header  = (type << 6) | 0x0003;
+		packet.address = (addr & ~3) + 4;
+		ret |= sisusb_send_packet(sisusb, 6, &packet);
+		*data |= (packet.data << 16);
+		break;
+	case 3:
+		packet.header  = (type << 6) | 0x0008;
+		ret = sisusb_send_packet(sisusb, 6, &packet);
+		*data = packet.data >> 24;
+		packet.header  = (type << 6) | 0x0007;
+		packet.address = (addr & ~3) + 4;
+		ret |= sisusb_send_packet(sisusb, 6, &packet);
+		*data |= (packet.data << 8);
+	}
+
+	return ret;
+}
+
+static int sisusb_read_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr,
+		char *kernbuffer, int length, char __user *userbuffer,
+		ssize_t *bytes_read)
+{
+	int ret = 0;
+	char buf[4];
+	u16 swap16;
+	u32 swap32;
+
+	(*bytes_read = 0);
+
+	length &= 0x00ffffff;
+
+	while (length) {
+		switch (length) {
+		case 1:
+			ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM,
+					addr, &buf[0]);
+			if (!ret) {
+				(*bytes_read)++;
+				if (userbuffer) {
+					if (put_user(buf[0], (u8 __user *)userbuffer))
+						return -EFAULT;
+				} else
+					kernbuffer[0] = buf[0];
+			}
+			return ret;
+
+		case 2:
+			ret |= sisusb_read_memio_word(sisusb, SISUSB_TYPE_MEM,
+					addr, &swap16);
+			if (!ret) {
+				(*bytes_read) += 2;
+				if (userbuffer) {
+					if (put_user(swap16, (u16 __user *)userbuffer))
+						return -EFAULT;
+				} else {
+					*((u16 *)kernbuffer) = swap16;
+				}
+			}
+			return ret;
+
+		case 3:
+			ret |= sisusb_read_memio_24bit(sisusb, SISUSB_TYPE_MEM,
+					addr, &swap32);
+			if (!ret) {
+				(*bytes_read) += 3;
+#ifdef __BIG_ENDIAN
+				buf[0] = (swap32 >> 16) & 0xff;
+				buf[1] = (swap32 >> 8) & 0xff;
+				buf[2] = swap32 & 0xff;
+#else
+				buf[2] = (swap32 >> 16) & 0xff;
+				buf[1] = (swap32 >> 8) & 0xff;
+				buf[0] = swap32 & 0xff;
+#endif
+				if (userbuffer) {
+					if (copy_to_user(userbuffer,
+							&buf[0], 3))
+						return -EFAULT;
+				} else {
+					kernbuffer[0] = buf[0];
+					kernbuffer[1] = buf[1];
+					kernbuffer[2] = buf[2];
+				}
+			}
+			return ret;
+
+		default:
+			ret |= sisusb_read_memio_long(sisusb, SISUSB_TYPE_MEM,
+					addr, &swap32);
+			if (!ret) {
+				(*bytes_read) += 4;
+				if (userbuffer) {
+					if (put_user(swap32, (u32 __user *)userbuffer))
+						return -EFAULT;
+
+					userbuffer += 4;
+				} else {
+					*((u32 *)kernbuffer) = swap32;
+					kernbuffer += 4;
+				}
+				addr += 4;
+				length -= 4;
+			}
+		}
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+/* High level: Gfx (indexed) register access */
+
+#ifdef CONFIG_USB_SISUSBVGA_CON
+int sisusb_setreg(struct sisusb_usb_data *sisusb, u32 port, u8 data)
+{
+	return sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
+}
+
+int sisusb_getreg(struct sisusb_usb_data *sisusb, u32 port, u8 *data)
+{
+	return sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
+}
+#endif
+
+int sisusb_setidxreg(struct sisusb_usb_data *sisusb, u32 port,
+		u8 index, u8 data)
+{
+	int ret;
+
+	ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, index);
+	ret |= sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, data);
+	return ret;
+}
+
+int sisusb_getidxreg(struct sisusb_usb_data *sisusb, u32 port,
+		u8 index, u8 *data)
+{
+	int ret;
+
+	ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, index);
+	ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, data);
+	return ret;
+}
+
+int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, u32 port, u8 idx,
+		u8 myand, u8 myor)
+{
+	int ret;
+	u8 tmp;
+
+	ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, idx);
+	ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, &tmp);
+	tmp &= myand;
+	tmp |= myor;
+	ret |= sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, tmp);
+	return ret;
+}
+
+static int sisusb_setidxregmask(struct sisusb_usb_data *sisusb,
+		u32 port, u8 idx, u8 data, u8 mask)
+{
+	int ret;
+	u8 tmp;
+
+	ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, idx);
+	ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, &tmp);
+	tmp &= ~(mask);
+	tmp |= (data & mask);
+	ret |= sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, tmp);
+	return ret;
+}
+
+int sisusb_setidxregor(struct sisusb_usb_data *sisusb, u32 port,
+		u8 index, u8 myor)
+{
+	return sisusb_setidxregandor(sisusb, port, index, 0xff, myor);
+}
+
+int sisusb_setidxregand(struct sisusb_usb_data *sisusb, u32 port,
+		u8 idx, u8 myand)
+{
+	return sisusb_setidxregandor(sisusb, port, idx, myand, 0x00);
+}
+
+/* Write/read video ram */
+
+#ifdef CONFIG_USB_SISUSBVGA_CON
+int sisusb_writeb(struct sisusb_usb_data *sisusb, u32 adr, u8 data)
+{
+	return sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM, adr, data);
+}
+
+int sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 *data)
+{
+	return sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, adr, data);
+}
+
+int sisusb_copy_memory(struct sisusb_usb_data *sisusb, u8 *src,
+		u32 dest, int length)
+{
+	size_t dummy;
+
+	return sisusb_write_mem_bulk(sisusb, dest, src, length,
+			NULL, 0, &dummy);
+}
+
+#ifdef SISUSBENDIANTEST
+static int sisusb_read_memory(struct sisusb_usb_data *sisusb, char *dest,
+		u32 src, int length)
+{
+	size_t dummy;
+
+	return sisusb_read_mem_bulk(sisusb, src, dest, length,
+			NULL, &dummy);
+}
+#endif
+#endif
+
+#ifdef SISUSBENDIANTEST
+static void sisusb_testreadwrite(struct sisusb_usb_data *sisusb)
+{
+	static u8 srcbuffer[] = { 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77 };
+	char destbuffer[10];
+	int i, j;
+
+	sisusb_copy_memory(sisusb, srcbuffer, sisusb->vrambase, 7);
+
+	for (i = 1; i <= 7; i++) {
+		dev_dbg(&sisusb->sisusb_dev->dev,
+				"sisusb: rwtest %d bytes\n", i);
+		sisusb_read_memory(sisusb, destbuffer, sisusb->vrambase, i);
+		for (j = 0; j < i; j++) {
+			dev_dbg(&sisusb->sisusb_dev->dev,
+					"rwtest read[%d] = %x\n",
+					j, destbuffer[j]);
+		}
+	}
+}
+#endif
+
+/* access pci config registers (reg numbers 0, 4, 8, etc) */
+
+static int sisusb_write_pci_config(struct sisusb_usb_data *sisusb,
+		int regnum, u32 data)
+{
+	struct sisusb_packet packet;
+
+	packet.header = 0x008f;
+	packet.address = regnum | 0x10000;
+	packet.data = data;
+	return sisusb_send_packet(sisusb, 10, &packet);
+}
+
+static int sisusb_read_pci_config(struct sisusb_usb_data *sisusb,
+		int regnum, u32 *data)
+{
+	struct sisusb_packet packet;
+	int ret;
+
+	packet.header = 0x008f;
+	packet.address = (u32)regnum | 0x10000;
+	ret = sisusb_send_packet(sisusb, 6, &packet);
+	*data = packet.data;
+	return ret;
+}
+
+/* Clear video RAM */
+
+static int sisusb_clear_vram(struct sisusb_usb_data *sisusb,
+		u32 address, int length)
+{
+	int ret, i;
+	ssize_t j;
+
+	if (address < sisusb->vrambase)
+		return 1;
+
+	if (address >= sisusb->vrambase + sisusb->vramsize)
+		return 1;
+
+	if (address + length > sisusb->vrambase + sisusb->vramsize)
+		length = sisusb->vrambase + sisusb->vramsize - address;
+
+	if (length <= 0)
+		return 0;
+
+	/* allocate free buffer/urb and clear the buffer */
+	i = sisusb_alloc_outbuf(sisusb);
+	if (i < 0)
+		return -EBUSY;
+
+	memset(sisusb->obuf[i], 0, sisusb->obufsize);
+
+	/* We can write a length > buffer size here. The buffer
+	 * data will simply be re-used (like a ring-buffer).
+	 */
+	ret = sisusb_write_mem_bulk(sisusb, address, NULL, length, NULL, i, &j);
+
+	/* Free the buffer/urb */
+	sisusb_free_outbuf(sisusb, i);
+
+	return ret;
+}
+
+/* Initialize the graphics core (return 0 on success)
+ * This resets the graphics hardware and puts it into
+ * a defined mode (640x480@60Hz)
+ */
+
+#define GETREG(r, d) sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, r, d)
+#define SETREG(r, d) sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, r, d)
+#define SETIREG(r, i, d) sisusb_setidxreg(sisusb, r, i, d)
+#define GETIREG(r, i, d) sisusb_getidxreg(sisusb, r, i, d)
+#define SETIREGOR(r, i, o) sisusb_setidxregor(sisusb, r, i, o)
+#define SETIREGAND(r, i, a) sisusb_setidxregand(sisusb, r, i, a)
+#define SETIREGANDOR(r, i, a, o) sisusb_setidxregandor(sisusb, r, i, a, o)
+#define READL(a, d) sisusb_read_memio_long(sisusb, SISUSB_TYPE_MEM, a, d)
+#define WRITEL(a, d) sisusb_write_memio_long(sisusb, SISUSB_TYPE_MEM, a, d)
+#define READB(a, d) sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, a, d)
+#define WRITEB(a, d) sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM, a, d)
+
+static int sisusb_triggersr16(struct sisusb_usb_data *sisusb, u8 ramtype)
+{
+	int ret;
+	u8 tmp8;
+
+	ret = GETIREG(SISSR, 0x16, &tmp8);
+	if (ramtype <= 1) {
+		tmp8 &= 0x3f;
+		ret |= SETIREG(SISSR, 0x16, tmp8);
+		tmp8 |= 0x80;
+		ret |= SETIREG(SISSR, 0x16, tmp8);
+	} else {
+		tmp8 |= 0xc0;
+		ret |= SETIREG(SISSR, 0x16, tmp8);
+		tmp8 &= 0x0f;
+		ret |= SETIREG(SISSR, 0x16, tmp8);
+		tmp8 |= 0x80;
+		ret |= SETIREG(SISSR, 0x16, tmp8);
+		tmp8 &= 0x0f;
+		ret |= SETIREG(SISSR, 0x16, tmp8);
+		tmp8 |= 0xd0;
+		ret |= SETIREG(SISSR, 0x16, tmp8);
+		tmp8 &= 0x0f;
+		ret |= SETIREG(SISSR, 0x16, tmp8);
+		tmp8 |= 0xa0;
+		ret |= SETIREG(SISSR, 0x16, tmp8);
+	}
+	return ret;
+}
+
+static int sisusb_getbuswidth(struct sisusb_usb_data *sisusb,
+		int *bw, int *chab)
+{
+	int ret;
+	u8  ramtype, done = 0;
+	u32 t0, t1, t2, t3;
+	u32 ramptr = SISUSB_PCI_MEMBASE;
+
+	ret = GETIREG(SISSR, 0x3a, &ramtype);
+	ramtype &= 3;
+
+	ret |= SETIREG(SISSR, 0x13, 0x00);
+
+	if (ramtype <= 1) {
+		ret |= SETIREG(SISSR, 0x14, 0x12);
+		ret |= SETIREGAND(SISSR, 0x15, 0xef);
+	} else {
+		ret |= SETIREG(SISSR, 0x14, 0x02);
+	}
+
+	ret |= sisusb_triggersr16(sisusb, ramtype);
+	ret |= WRITEL(ramptr +  0, 0x01234567);
+	ret |= WRITEL(ramptr +  4, 0x456789ab);
+	ret |= WRITEL(ramptr +  8, 0x89abcdef);
+	ret |= WRITEL(ramptr + 12, 0xcdef0123);
+	ret |= WRITEL(ramptr + 16, 0x55555555);
+	ret |= WRITEL(ramptr + 20, 0x55555555);
+	ret |= WRITEL(ramptr + 24, 0xffffffff);
+	ret |= WRITEL(ramptr + 28, 0xffffffff);
+	ret |= READL(ramptr +  0, &t0);
+	ret |= READL(ramptr +  4, &t1);
+	ret |= READL(ramptr +  8, &t2);
+	ret |= READL(ramptr + 12, &t3);
+
+	if (ramtype <= 1) {
+
+		*chab = 0; *bw = 64;
+
+		if ((t3 != 0xcdef0123) || (t2 != 0x89abcdef)) {
+			if ((t1 == 0x456789ab) && (t0 == 0x01234567)) {
+				*chab = 0; *bw = 64;
+				ret |= SETIREGAND(SISSR, 0x14, 0xfd);
+			}
+		}
+		if ((t1 != 0x456789ab) || (t0 != 0x01234567)) {
+			*chab = 1; *bw = 64;
+			ret |= SETIREGANDOR(SISSR, 0x14, 0xfc, 0x01);
+
+			ret |= sisusb_triggersr16(sisusb, ramtype);
+			ret |= WRITEL(ramptr +  0, 0x89abcdef);
+			ret |= WRITEL(ramptr +  4, 0xcdef0123);
+			ret |= WRITEL(ramptr +  8, 0x55555555);
+			ret |= WRITEL(ramptr + 12, 0x55555555);
+			ret |= WRITEL(ramptr + 16, 0xaaaaaaaa);
+			ret |= WRITEL(ramptr + 20, 0xaaaaaaaa);
+			ret |= READL(ramptr +  4, &t1);
+
+			if (t1 != 0xcdef0123) {
+				*bw = 32;
+				ret |= SETIREGOR(SISSR, 0x15, 0x10);
+			}
+		}
+
+	} else {
+
+		*chab = 0; *bw = 64;	/* default: cha, bw = 64 */
+
+		done = 0;
+
+		if (t1 == 0x456789ab) {
+			if (t0 == 0x01234567) {
+				*chab = 0; *bw = 64;
+				done = 1;
+			}
+		} else {
+			if (t0 == 0x01234567) {
+				*chab = 0; *bw = 32;
+				ret |= SETIREG(SISSR, 0x14, 0x00);
+				done = 1;
+			}
+		}
+
+		if (!done) {
+			ret |= SETIREG(SISSR, 0x14, 0x03);
+			ret |= sisusb_triggersr16(sisusb, ramtype);
+
+			ret |= WRITEL(ramptr +  0, 0x01234567);
+			ret |= WRITEL(ramptr +  4, 0x456789ab);
+			ret |= WRITEL(ramptr +  8, 0x89abcdef);
+			ret |= WRITEL(ramptr + 12, 0xcdef0123);
+			ret |= WRITEL(ramptr + 16, 0x55555555);
+			ret |= WRITEL(ramptr + 20, 0x55555555);
+			ret |= WRITEL(ramptr + 24, 0xffffffff);
+			ret |= WRITEL(ramptr + 28, 0xffffffff);
+			ret |= READL(ramptr +  0, &t0);
+			ret |= READL(ramptr +  4, &t1);
+
+			if (t1 == 0x456789ab) {
+				if (t0 == 0x01234567) {
+					*chab = 1; *bw = 64;
+					return ret;
+				} /* else error */
+			} else {
+				if (t0 == 0x01234567) {
+					*chab = 1; *bw = 32;
+					ret |= SETIREG(SISSR, 0x14, 0x01);
+				} /* else error */
+			}
+		}
+	}
+	return ret;
+}
+
+static int sisusb_verify_mclk(struct sisusb_usb_data *sisusb)
+{
+	int ret = 0;
+	u32 ramptr = SISUSB_PCI_MEMBASE;
+	u8 tmp1, tmp2, i, j;
+
+	ret |= WRITEB(ramptr, 0xaa);
+	ret |= WRITEB(ramptr + 16, 0x55);
+	ret |= READB(ramptr, &tmp1);
+	ret |= READB(ramptr + 16, &tmp2);
+	if ((tmp1 != 0xaa) || (tmp2 != 0x55)) {
+		for (i = 0, j = 16; i < 2; i++, j += 16) {
+			ret |= GETIREG(SISSR, 0x21, &tmp1);
+			ret |= SETIREGAND(SISSR, 0x21, (tmp1 & 0xfb));
+			ret |= SETIREGOR(SISSR, 0x3c, 0x01);  /* not on 330 */
+			ret |= SETIREGAND(SISSR, 0x3c, 0xfe); /* not on 330 */
+			ret |= SETIREG(SISSR, 0x21, tmp1);
+			ret |= WRITEB(ramptr + 16 + j, j);
+			ret |= READB(ramptr + 16 + j, &tmp1);
+			if (tmp1 == j) {
+				ret |= WRITEB(ramptr + j, j);
+				break;
+			}
+		}
+	}
+	return ret;
+}
+
+static int sisusb_set_rank(struct sisusb_usb_data *sisusb, int *iret,
+		int index, u8 rankno, u8 chab, const u8 dramtype[][5], int bw)
+{
+	int ret = 0, ranksize;
+	u8 tmp;
+
+	*iret = 0;
+
+	if ((rankno == 2) && (dramtype[index][0] == 2))
+		return ret;
+
+	ranksize = dramtype[index][3] / 2 * bw / 32;
+
+	if ((ranksize * rankno) > 128)
+		return ret;
+
+	tmp = 0;
+	while ((ranksize >>= 1) > 0)
+		tmp += 0x10;
+
+	tmp |= ((rankno - 1) << 2);
+	tmp |= ((bw / 64) & 0x02);
+	tmp |= (chab & 0x01);
+
+	ret = SETIREG(SISSR, 0x14, tmp);
+	ret |= sisusb_triggersr16(sisusb, 0); /* sic! */
+
+	*iret = 1;
+
+	return ret;
+}
+
+static int sisusb_check_rbc(struct sisusb_usb_data *sisusb, int *iret,
+		u32 inc, int testn)
+{
+	int ret = 0, i;
+	u32 j, tmp;
+
+	*iret = 0;
+
+	for (i = 0, j = 0; i < testn; i++) {
+		ret |= WRITEL(sisusb->vrambase + j, j);
+		j += inc;
+	}
+
+	for (i = 0, j = 0; i < testn; i++) {
+		ret |= READL(sisusb->vrambase + j, &tmp);
+		if (tmp != j)
+			return ret;
+
+		j += inc;
+	}
+
+	*iret = 1;
+	return ret;
+}
+
+static int sisusb_check_ranks(struct sisusb_usb_data *sisusb,
+		int *iret, int rankno, int idx, int bw, const u8 rtype[][5])
+{
+	int ret = 0, i, i2ret;
+	u32 inc;
+
+	*iret = 0;
+
+	for (i = rankno; i >= 1; i--) {
+		inc = 1 << (rtype[idx][2] + rtype[idx][1] + rtype[idx][0] +
+				bw / 64 + i);
+		ret |= sisusb_check_rbc(sisusb, &i2ret, inc, 2);
+		if (!i2ret)
+			return ret;
+	}
+
+	inc = 1 << (rtype[idx][2] + bw / 64 + 2);
+	ret |= sisusb_check_rbc(sisusb, &i2ret, inc, 4);
+	if (!i2ret)
+		return ret;
+
+	inc = 1 << (10 + bw / 64);
+	ret |= sisusb_check_rbc(sisusb, &i2ret, inc, 2);
+	if (!i2ret)
+		return ret;
+
+	*iret = 1;
+	return ret;
+}
+
+static int sisusb_get_sdram_size(struct sisusb_usb_data *sisusb, int *iret,
+		int bw, int chab)
+{
+	int ret = 0, i2ret = 0, i, j;
+	static const u8 sdramtype[13][5] = {
+		{ 2, 12, 9, 64, 0x35 },
+		{ 1, 13, 9, 64, 0x44 },
+		{ 2, 12, 8, 32, 0x31 },
+		{ 2, 11, 9, 32, 0x25 },
+		{ 1, 12, 9, 32, 0x34 },
+		{ 1, 13, 8, 32, 0x40 },
+		{ 2, 11, 8, 16, 0x21 },
+		{ 1, 12, 8, 16, 0x30 },
+		{ 1, 11, 9, 16, 0x24 },
+		{ 1, 11, 8,  8, 0x20 },
+		{ 2,  9, 8,  4, 0x01 },
+		{ 1, 10, 8,  4, 0x10 },
+		{ 1,  9, 8,  2, 0x00 }
+	};
+
+	*iret = 1; /* error */
+
+	for (i = 0; i < 13; i++) {
+		ret |= SETIREGANDOR(SISSR, 0x13, 0x80, sdramtype[i][4]);
+		for (j = 2; j > 0; j--) {
+			ret |= sisusb_set_rank(sisusb, &i2ret, i, j, chab,
+					sdramtype, bw);
+			if (!i2ret)
+				continue;
+
+			ret |= sisusb_check_ranks(sisusb, &i2ret, j, i, bw,
+					sdramtype);
+			if (i2ret) {
+				*iret = 0;	/* ram size found */
+				return ret;
+			}
+		}
+	}
+
+	return ret;
+}
+
+static int sisusb_setup_screen(struct sisusb_usb_data *sisusb,
+		int clrall, int drwfr)
+{
+	int ret = 0;
+	u32 address;
+	int i, length, modex, modey, bpp;
+
+	modex = 640; modey = 480; bpp = 2;
+
+	address = sisusb->vrambase;	/* Clear video ram */
+
+	if (clrall)
+		length = sisusb->vramsize;
+	else
+		length = modex * bpp * modey;
+
+	ret = sisusb_clear_vram(sisusb, address, length);
+
+	if (!ret && drwfr) {
+		for (i = 0; i < modex; i++) {
+			address = sisusb->vrambase + (i * bpp);
+			ret |= sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM,
+					address, 0xf100);
+			address += (modex * (modey-1) * bpp);
+			ret |= sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM,
+					address, 0xf100);
+		}
+		for (i = 0; i < modey; i++) {
+			address = sisusb->vrambase + ((i * modex) * bpp);
+			ret |= sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM,
+					address, 0xf100);
+			address += ((modex - 1) * bpp);
+			ret |= sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM,
+					address, 0xf100);
+		}
+	}
+
+	return ret;
+}
+
+static void sisusb_set_default_mode(struct sisusb_usb_data *sisusb,
+		int touchengines)
+{
+	int i, j, modex, bpp, du;
+	u8 sr31, cr63, tmp8;
+	static const char attrdata[] = {
+		0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+		0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+		0x01, 0x00, 0x00, 0x00
+	};
+	static const char crtcrdata[] = {
+		0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0x0b, 0x3e,
+		0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0xea, 0x8c, 0xdf, 0x28, 0x40, 0xe7, 0x04, 0xa3,
+		0xff
+	};
+	static const char grcdata[] = {
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0f,
+		0xff
+	};
+	static const char crtcdata[] = {
+		0x5f, 0x4f, 0x4f, 0x83, 0x55, 0x81, 0x0b, 0x3e,
+		0xe9, 0x8b, 0xdf, 0xe8, 0x0c, 0x00, 0x00, 0x05,
+		0x00
+	};
+
+	modex = 640; bpp = 2;
+
+	GETIREG(SISSR, 0x31, &sr31);
+	GETIREG(SISCR, 0x63, &cr63);
+	SETIREGOR(SISSR, 0x01, 0x20);
+	SETIREG(SISCR, 0x63, cr63 & 0xbf);
+	SETIREGOR(SISCR, 0x17, 0x80);
+	SETIREGOR(SISSR, 0x1f, 0x04);
+	SETIREGAND(SISSR, 0x07, 0xfb);
+	SETIREG(SISSR, 0x00, 0x03);	/* seq */
+	SETIREG(SISSR, 0x01, 0x21);
+	SETIREG(SISSR, 0x02, 0x0f);
+	SETIREG(SISSR, 0x03, 0x00);
+	SETIREG(SISSR, 0x04, 0x0e);
+	SETREG(SISMISCW, 0x23);		/* misc */
+	for (i = 0; i <= 0x18; i++) {	/* crtc */
+		SETIREG(SISCR, i, crtcrdata[i]);
+	}
+	for (i = 0; i <= 0x13; i++) {	/* att */
+		GETREG(SISINPSTAT, &tmp8);
+		SETREG(SISAR, i);
+		SETREG(SISAR, attrdata[i]);
+	}
+	GETREG(SISINPSTAT, &tmp8);
+	SETREG(SISAR, 0x14);
+	SETREG(SISAR, 0x00);
+	GETREG(SISINPSTAT, &tmp8);
+	SETREG(SISAR, 0x20);
+	GETREG(SISINPSTAT, &tmp8);
+	for (i = 0; i <= 0x08; i++) {	/* grc */
+		SETIREG(SISGR, i, grcdata[i]);
+	}
+	SETIREGAND(SISGR, 0x05, 0xbf);
+	for (i = 0x0A; i <= 0x0E; i++) {	/* clr ext */
+		SETIREG(SISSR, i, 0x00);
+	}
+	SETIREGAND(SISSR, 0x37, 0xfe);
+	SETREG(SISMISCW, 0xef);		/* sync */
+	SETIREG(SISCR, 0x11, 0x00);	/* crtc */
+	for (j = 0x00, i = 0; i <= 7; i++, j++)
+		SETIREG(SISCR, j, crtcdata[i]);
+
+	for (j = 0x10; i <= 10; i++, j++)
+		SETIREG(SISCR, j, crtcdata[i]);
+
+	for (j = 0x15; i <= 12; i++, j++)
+		SETIREG(SISCR, j, crtcdata[i]);
+
+	for (j = 0x0A; i <= 15; i++, j++)
+		SETIREG(SISSR, j, crtcdata[i]);
+
+	SETIREG(SISSR, 0x0E, (crtcdata[16] & 0xE0));
+	SETIREGANDOR(SISCR, 0x09, 0x5f, ((crtcdata[16] & 0x01) << 5));
+	SETIREG(SISCR, 0x14, 0x4f);
+	du = (modex / 16) * (bpp * 2);	/* offset/pitch */
+	SETIREGANDOR(SISSR, 0x0e, 0xf0, ((du >> 8) & 0x0f));
+	SETIREG(SISCR, 0x13, (du & 0xff));
+	du <<= 5;
+	tmp8 = du >> 8;
+	SETIREG(SISSR, 0x10, tmp8);
+	SETIREG(SISSR, 0x31, 0x00);	/* VCLK */
+	SETIREG(SISSR, 0x2b, 0x1b);
+	SETIREG(SISSR, 0x2c, 0xe1);
+	SETIREG(SISSR, 0x2d, 0x01);
+	SETIREGAND(SISSR, 0x3d, 0xfe);	/* FIFO */
+	SETIREG(SISSR, 0x08, 0xae);
+	SETIREGAND(SISSR, 0x09, 0xf0);
+	SETIREG(SISSR, 0x08, 0x34);
+	SETIREGOR(SISSR, 0x3d, 0x01);
+	SETIREGAND(SISSR, 0x1f, 0x3f);	/* mode regs */
+	SETIREGANDOR(SISSR, 0x06, 0xc0, 0x0a);
+	SETIREG(SISCR, 0x19, 0x00);
+	SETIREGAND(SISCR, 0x1a, 0xfc);
+	SETIREGAND(SISSR, 0x0f, 0xb7);
+	SETIREGAND(SISSR, 0x31, 0xfb);
+	SETIREGANDOR(SISSR, 0x21, 0x1f, 0xa0);
+	SETIREGAND(SISSR, 0x32, 0xf3);
+	SETIREGANDOR(SISSR, 0x07, 0xf8, 0x03);
+	SETIREG(SISCR, 0x52, 0x6c);
+
+	SETIREG(SISCR, 0x0d, 0x00);	/* adjust frame */
+	SETIREG(SISCR, 0x0c, 0x00);
+	SETIREG(SISSR, 0x0d, 0x00);
+	SETIREGAND(SISSR, 0x37, 0xfe);
+
+	SETIREG(SISCR, 0x32, 0x20);
+	SETIREGAND(SISSR, 0x01, 0xdf);	/* enable display */
+	SETIREG(SISCR, 0x63, (cr63 & 0xbf));
+	SETIREG(SISSR, 0x31, (sr31 & 0xfb));
+
+	if (touchengines) {
+		SETIREG(SISSR, 0x20, 0xa1);	/* enable engines */
+		SETIREGOR(SISSR, 0x1e, 0x5a);
+
+		SETIREG(SISSR, 0x26, 0x01);	/* disable cmdqueue */
+		SETIREG(SISSR, 0x27, 0x1f);
+		SETIREG(SISSR, 0x26, 0x00);
+	}
+
+	SETIREG(SISCR, 0x34, 0x44);	/* we just set std mode #44 */
+}
+
+static int sisusb_init_gfxcore(struct sisusb_usb_data *sisusb)
+{
+	int ret = 0, i, j, bw, chab, iret, retry = 3;
+	u8 tmp8, ramtype;
+	u32 tmp32;
+	static const char mclktable[] = {
+		0x3b, 0x22, 0x01, 143,
+		0x3b, 0x22, 0x01, 143,
+		0x3b, 0x22, 0x01, 143,
+		0x3b, 0x22, 0x01, 143
+	};
+	static const char eclktable[] = {
+		0x3b, 0x22, 0x01, 143,
+		0x3b, 0x22, 0x01, 143,
+		0x3b, 0x22, 0x01, 143,
+		0x3b, 0x22, 0x01, 143
+	};
+	static const char ramtypetable1[] = {
+		0x00, 0x04, 0x60, 0x60,
+		0x0f, 0x0f, 0x1f, 0x1f,
+		0xba, 0xba, 0xba, 0xba,
+		0xa9, 0xa9, 0xac, 0xac,
+		0xa0, 0xa0, 0xa0, 0xa8,
+		0x00, 0x00, 0x02, 0x02,
+		0x30, 0x30, 0x40, 0x40
+	};
+	static const char ramtypetable2[] = {
+		0x77, 0x77, 0x44, 0x44,
+		0x77, 0x77, 0x44, 0x44,
+		0x00, 0x00, 0x00, 0x00,
+		0x5b, 0x5b, 0xab, 0xab,
+		0x00, 0x00, 0xf0, 0xf8
+	};
+
+	while (retry--) {
+
+		/* Enable VGA */
+		ret = GETREG(SISVGAEN, &tmp8);
+		ret |= SETREG(SISVGAEN, (tmp8 | 0x01));
+
+		/* Enable GPU access to VRAM */
+		ret |= GETREG(SISMISCR, &tmp8);
+		ret |= SETREG(SISMISCW, (tmp8 | 0x01));
+
+		if (ret)
+			continue;
+
+		/* Reset registers */
+		ret |= SETIREGAND(SISCR, 0x5b, 0xdf);
+		ret |= SETIREG(SISSR, 0x05, 0x86);
+		ret |= SETIREGOR(SISSR, 0x20, 0x01);
+
+		ret |= SETREG(SISMISCW, 0x67);
+
+		for (i = 0x06; i <= 0x1f; i++)
+			ret |= SETIREG(SISSR, i, 0x00);
+
+		for (i = 0x21; i <= 0x27; i++)
+			ret |= SETIREG(SISSR, i, 0x00);
+
+		for (i = 0x31; i <= 0x3d; i++)
+			ret |= SETIREG(SISSR, i, 0x00);
+
+		for (i = 0x12; i <= 0x1b; i++)
+			ret |= SETIREG(SISSR, i, 0x00);
+
+		for (i = 0x79; i <= 0x7c; i++)
+			ret |= SETIREG(SISCR, i, 0x00);
+
+		if (ret)
+			continue;
+
+		ret |= SETIREG(SISCR, 0x63, 0x80);
+
+		ret |= GETIREG(SISSR, 0x3a, &ramtype);
+		ramtype &= 0x03;
+
+		ret |= SETIREG(SISSR, 0x28, mclktable[ramtype * 4]);
+		ret |= SETIREG(SISSR, 0x29, mclktable[(ramtype * 4) + 1]);
+		ret |= SETIREG(SISSR, 0x2a, mclktable[(ramtype * 4) + 2]);
+
+		ret |= SETIREG(SISSR, 0x2e, eclktable[ramtype * 4]);
+		ret |= SETIREG(SISSR, 0x2f, eclktable[(ramtype * 4) + 1]);
+		ret |= SETIREG(SISSR, 0x30, eclktable[(ramtype * 4) + 2]);
+
+		ret |= SETIREG(SISSR, 0x07, 0x18);
+		ret |= SETIREG(SISSR, 0x11, 0x0f);
+
+		if (ret)
+			continue;
+
+		for (i = 0x15, j = 0; i <= 0x1b; i++, j++) {
+			ret |= SETIREG(SISSR, i,
+					ramtypetable1[(j*4) + ramtype]);
+		}
+		for (i = 0x40, j = 0; i <= 0x44; i++, j++) {
+			ret |= SETIREG(SISCR, i,
+					ramtypetable2[(j*4) + ramtype]);
+		}
+
+		ret |= SETIREG(SISCR, 0x49, 0xaa);
+
+		ret |= SETIREG(SISSR, 0x1f, 0x00);
+		ret |= SETIREG(SISSR, 0x20, 0xa0);
+		ret |= SETIREG(SISSR, 0x23, 0xf6);
+		ret |= SETIREG(SISSR, 0x24, 0x0d);
+		ret |= SETIREG(SISSR, 0x25, 0x33);
+
+		ret |= SETIREG(SISSR, 0x11, 0x0f);
+
+		ret |= SETIREGOR(SISPART1, 0x2f, 0x01);
+
+		ret |= SETIREGAND(SISCAP, 0x3f, 0xef);
+
+		if (ret)
+			continue;
+
+		ret |= SETIREG(SISPART1, 0x00, 0x00);
+
+		ret |= GETIREG(SISSR, 0x13, &tmp8);
+		tmp8 >>= 4;
+
+		ret |= SETIREG(SISPART1, 0x02, 0x00);
+		ret |= SETIREG(SISPART1, 0x2e, 0x08);
+
+		ret |= sisusb_read_pci_config(sisusb, 0x50, &tmp32);
+		tmp32 &= 0x00f00000;
+		tmp8 = (tmp32 == 0x100000) ? 0x33 : 0x03;
+		ret |= SETIREG(SISSR, 0x25, tmp8);
+		tmp8 = (tmp32 == 0x100000) ? 0xaa : 0x88;
+		ret |= SETIREG(SISCR, 0x49, tmp8);
+
+		ret |= SETIREG(SISSR, 0x27, 0x1f);
+		ret |= SETIREG(SISSR, 0x31, 0x00);
+		ret |= SETIREG(SISSR, 0x32, 0x11);
+		ret |= SETIREG(SISSR, 0x33, 0x00);
+
+		if (ret)
+			continue;
+
+		ret |= SETIREG(SISCR, 0x83, 0x00);
+
+		sisusb_set_default_mode(sisusb, 0);
+
+		ret |= SETIREGAND(SISSR, 0x21, 0xdf);
+		ret |= SETIREGOR(SISSR, 0x01, 0x20);
+		ret |= SETIREGOR(SISSR, 0x16, 0x0f);
+
+		ret |= sisusb_triggersr16(sisusb, ramtype);
+
+		/* Disable refresh */
+		ret |= SETIREGAND(SISSR, 0x17, 0xf8);
+		ret |= SETIREGOR(SISSR, 0x19, 0x03);
+
+		ret |= sisusb_getbuswidth(sisusb, &bw, &chab);
+		ret |= sisusb_verify_mclk(sisusb);
+
+		if (ramtype <= 1) {
+			ret |= sisusb_get_sdram_size(sisusb, &iret, bw, chab);
+			if (iret) {
+				dev_err(&sisusb->sisusb_dev->dev,
+						"RAM size detection failed, assuming 8MB video RAM\n");
+				ret |= SETIREG(SISSR, 0x14, 0x31);
+				/* TODO */
+			}
+		} else {
+			dev_err(&sisusb->sisusb_dev->dev,
+					"DDR RAM device found, assuming 8MB video RAM\n");
+			ret |= SETIREG(SISSR, 0x14, 0x31);
+			/* *** TODO *** */
+		}
+
+		/* Enable refresh */
+		ret |= SETIREG(SISSR, 0x16, ramtypetable1[4 + ramtype]);
+		ret |= SETIREG(SISSR, 0x17, ramtypetable1[8 + ramtype]);
+		ret |= SETIREG(SISSR, 0x19, ramtypetable1[16 + ramtype]);
+
+		ret |= SETIREGOR(SISSR, 0x21, 0x20);
+
+		ret |= SETIREG(SISSR, 0x22, 0xfb);
+		ret |= SETIREG(SISSR, 0x21, 0xa5);
+
+		if (ret == 0)
+			break;
+	}
+
+	return ret;
+}
+
+#undef SETREG
+#undef GETREG
+#undef SETIREG
+#undef GETIREG
+#undef SETIREGOR
+#undef SETIREGAND
+#undef SETIREGANDOR
+#undef READL
+#undef WRITEL
+
+static void sisusb_get_ramconfig(struct sisusb_usb_data *sisusb)
+{
+	u8 tmp8, tmp82, ramtype;
+	int bw = 0;
+	char *ramtypetext1 = NULL;
+	static const char ram_datarate[4] = {'S', 'S', 'D', 'D'};
+	static const char ram_dynamictype[4] = {'D', 'G', 'D', 'G'};
+	static const int busSDR[4]  = {64, 64, 128, 128};
+	static const int busDDR[4]  = {32, 32,  64,  64};
+	static const int busDDRA[4] = {64+32, 64+32, (64+32)*2, (64+32)*2};
+
+	sisusb_getidxreg(sisusb, SISSR, 0x14, &tmp8);
+	sisusb_getidxreg(sisusb, SISSR, 0x15, &tmp82);
+	sisusb_getidxreg(sisusb, SISSR, 0x3a, &ramtype);
+	sisusb->vramsize = (1 << ((tmp8 & 0xf0) >> 4)) * 1024 * 1024;
+	ramtype &= 0x03;
+	switch ((tmp8 >> 2) & 0x03) {
+	case 0:
+		ramtypetext1 = "1 ch/1 r";
+		if (tmp82 & 0x10)
+			bw = 32;
+		else
+			bw = busSDR[(tmp8 & 0x03)];
+
+		break;
+	case 1:
+		ramtypetext1 = "1 ch/2 r";
+		sisusb->vramsize <<= 1;
+		bw = busSDR[(tmp8 & 0x03)];
+		break;
+	case 2:
+		ramtypetext1 = "asymmetric";
+		sisusb->vramsize += sisusb->vramsize/2;
+		bw = busDDRA[(tmp8 & 0x03)];
+		break;
+	case 3:
+		ramtypetext1 = "2 channel";
+		sisusb->vramsize <<= 1;
+		bw = busDDR[(tmp8 & 0x03)];
+		break;
+	}
+
+	dev_info(&sisusb->sisusb_dev->dev,
+			"%dMB %s %cDR S%cRAM, bus width %d\n",
+			sisusb->vramsize >> 20, ramtypetext1,
+			ram_datarate[ramtype], ram_dynamictype[ramtype], bw);
+}
+
+static int sisusb_do_init_gfxdevice(struct sisusb_usb_data *sisusb)
+{
+	struct sisusb_packet packet;
+	int ret;
+	u32 tmp32;
+
+	/* Do some magic */
+	packet.header  = 0x001f;
+	packet.address = 0x00000324;
+	packet.data    = 0x00000004;
+	ret = sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
+
+	packet.header  = 0x001f;
+	packet.address = 0x00000364;
+	packet.data    = 0x00000004;
+	ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
+
+	packet.header  = 0x001f;
+	packet.address = 0x00000384;
+	packet.data    = 0x00000004;
+	ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
+
+	packet.header  = 0x001f;
+	packet.address = 0x00000100;
+	packet.data    = 0x00000700;
+	ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
+
+	packet.header  = 0x000f;
+	packet.address = 0x00000004;
+	ret |= sisusb_send_bridge_packet(sisusb, 6, &packet, 0);
+	packet.data |= 0x17;
+	ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
+
+	/* Init BAR 0 (VRAM) */
+	ret |= sisusb_read_pci_config(sisusb, 0x10, &tmp32);
+	ret |= sisusb_write_pci_config(sisusb, 0x10, 0xfffffff0);
+	ret |= sisusb_read_pci_config(sisusb, 0x10, &tmp32);
+	tmp32 &= 0x0f;
+	tmp32 |= SISUSB_PCI_MEMBASE;
+	ret |= sisusb_write_pci_config(sisusb, 0x10, tmp32);
+
+	/* Init BAR 1 (MMIO) */
+	ret |= sisusb_read_pci_config(sisusb, 0x14, &tmp32);
+	ret |= sisusb_write_pci_config(sisusb, 0x14, 0xfffffff0);
+	ret |= sisusb_read_pci_config(sisusb, 0x14, &tmp32);
+	tmp32 &= 0x0f;
+	tmp32 |= SISUSB_PCI_MMIOBASE;
+	ret |= sisusb_write_pci_config(sisusb, 0x14, tmp32);
+
+	/* Init BAR 2 (i/o ports) */
+	ret |= sisusb_read_pci_config(sisusb, 0x18, &tmp32);
+	ret |= sisusb_write_pci_config(sisusb, 0x18, 0xfffffff0);
+	ret |= sisusb_read_pci_config(sisusb, 0x18, &tmp32);
+	tmp32 &= 0x0f;
+	tmp32 |= SISUSB_PCI_IOPORTBASE;
+	ret |= sisusb_write_pci_config(sisusb, 0x18, tmp32);
+
+	/* Enable memory and i/o access */
+	ret |= sisusb_read_pci_config(sisusb, 0x04, &tmp32);
+	tmp32 |= 0x3;
+	ret |= sisusb_write_pci_config(sisusb, 0x04, tmp32);
+
+	if (ret == 0) {
+		/* Some further magic */
+		packet.header  = 0x001f;
+		packet.address = 0x00000050;
+		packet.data    = 0x000000ff;
+		ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
+	}
+
+	return ret;
+}
+
+/* Initialize the graphics device (return 0 on success)
+ * This initializes the net2280 as well as the PCI registers
+ * of the graphics board.
+ */
+
+static int sisusb_init_gfxdevice(struct sisusb_usb_data *sisusb, int initscreen)
+{
+	int ret = 0, test = 0;
+	u32 tmp32;
+
+	if (sisusb->devinit == 1) {
+		/* Read PCI BARs and see if they have been set up */
+		ret |= sisusb_read_pci_config(sisusb, 0x10, &tmp32);
+		if (ret)
+			return ret;
+
+		if ((tmp32 & 0xfffffff0) == SISUSB_PCI_MEMBASE)
+			test++;
+
+		ret |= sisusb_read_pci_config(sisusb, 0x14, &tmp32);
+		if (ret)
+			return ret;
+
+		if ((tmp32 & 0xfffffff0) == SISUSB_PCI_MMIOBASE)
+			test++;
+
+		ret |= sisusb_read_pci_config(sisusb, 0x18, &tmp32);
+		if (ret)
+			return ret;
+
+		if ((tmp32 & 0xfffffff0) == SISUSB_PCI_IOPORTBASE)
+			test++;
+	}
+
+	/* No? So reset the device */
+	if ((sisusb->devinit == 0) || (test != 3)) {
+
+		ret |= sisusb_do_init_gfxdevice(sisusb);
+
+		if (ret == 0)
+			sisusb->devinit = 1;
+
+	}
+
+	if (sisusb->devinit) {
+		/* Initialize the graphics core */
+		if (sisusb_init_gfxcore(sisusb) == 0) {
+			sisusb->gfxinit = 1;
+			sisusb_get_ramconfig(sisusb);
+			sisusb_set_default_mode(sisusb, 1);
+			ret |= sisusb_setup_screen(sisusb, 1, initscreen);
+		}
+	}
+
+	return ret;
+}
+
+
+#ifdef CONFIG_USB_SISUSBVGA_CON
+
+/* Set up default text mode:
+ * - Set text mode (0x03)
+ * - Upload default font
+ * - Upload user font (if available)
+ */
+
+int sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init)
+{
+	int ret = 0, slot = sisusb->font_slot, i;
+	const struct font_desc *myfont;
+	u8 *tempbuf;
+	u16 *tempbufb;
+	static const char bootstring[] =
+		"SiSUSB VGA text console, (C) 2005 Thomas Winischhofer.";
+	static const char bootlogo[] = "(o_ //\\ V_/_";
+
+	/* sisusb->lock is down */
+
+	if (!sisusb->SiS_Pr)
+		return 1;
+
+	sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30;
+	sisusb->SiS_Pr->sisusb = (void *)sisusb;
+
+	/* Set mode 0x03 */
+	SiSUSBSetMode(sisusb->SiS_Pr, 0x03);
+
+	myfont = find_font("VGA8x16");
+	if (!myfont)
+		return 1;
+
+	tempbuf = vmalloc(8192);
+	if (!tempbuf)
+		return 1;
+
+	for (i = 0; i < 256; i++)
+		memcpy(tempbuf + (i * 32), myfont->data + (i * 16), 16);
+
+	/* Upload default font */
+	ret = sisusbcon_do_font_op(sisusb, 1, 0, tempbuf, 8192,
+			0, 1, NULL, 16, 0);
+
+	vfree(tempbuf);
+
+	/* Upload user font (and reset current slot) */
+	if (sisusb->font_backup) {
+		ret |= sisusbcon_do_font_op(sisusb, 1, 2, sisusb->font_backup,
+				8192, sisusb->font_backup_512, 1, NULL,
+				sisusb->font_backup_height, 0);
+		if (slot != 2)
+			sisusbcon_do_font_op(sisusb, 1, 0, NULL, 0, 0, 1,
+					NULL, 16, 0);
+	}
+
+	if (init && !sisusb->scrbuf) {
+
+		tempbuf = vmalloc(8192);
+		if (tempbuf) {
+
+			i = 4096;
+			tempbufb = (u16 *)tempbuf;
+			while (i--)
+				*(tempbufb++) = 0x0720;
+
+			i = 0;
+			tempbufb = (u16 *)tempbuf;
+			while (bootlogo[i]) {
+				*(tempbufb++) = 0x0700 | bootlogo[i++];
+				if (!(i % 4))
+					tempbufb += 76;
+			}
+
+			i = 0;
+			tempbufb = (u16 *)tempbuf + 6;
+			while (bootstring[i])
+				*(tempbufb++) = 0x0700 | bootstring[i++];
+
+			ret |= sisusb_copy_memory(sisusb, tempbuf,
+					sisusb->vrambase, 8192);
+
+			vfree(tempbuf);
+
+		}
+
+	} else if (sisusb->scrbuf) {
+		ret |= sisusb_copy_memory(sisusb, (u8 *)sisusb->scrbuf,
+				sisusb->vrambase, sisusb->scrbuf_size);
+	}
+
+	if (sisusb->sisusb_cursor_size_from >= 0 &&
+			sisusb->sisusb_cursor_size_to >= 0) {
+		sisusb_setidxreg(sisusb, SISCR, 0x0a,
+				sisusb->sisusb_cursor_size_from);
+		sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0xe0,
+				sisusb->sisusb_cursor_size_to);
+	} else {
+		sisusb_setidxreg(sisusb, SISCR, 0x0a, 0x2d);
+		sisusb_setidxreg(sisusb, SISCR, 0x0b, 0x0e);
+		sisusb->sisusb_cursor_size_to = -1;
+	}
+
+	slot = sisusb->sisusb_cursor_loc;
+	if (slot < 0)
+		slot = 0;
+
+	sisusb->sisusb_cursor_loc = -1;
+	sisusb->bad_cursor_pos = 1;
+
+	sisusb_set_cursor(sisusb, slot);
+
+	sisusb_setidxreg(sisusb, SISCR, 0x0c, (sisusb->cur_start_addr >> 8));
+	sisusb_setidxreg(sisusb, SISCR, 0x0d, (sisusb->cur_start_addr & 0xff));
+
+	sisusb->textmodedestroyed = 0;
+
+	/* sisusb->lock is down */
+
+	return ret;
+}
+
+#endif
+
+/* fops */
+
+static int sisusb_open(struct inode *inode, struct file *file)
+{
+	struct sisusb_usb_data *sisusb;
+	struct usb_interface *interface;
+	int subminor = iminor(inode);
+
+	interface = usb_find_interface(&sisusb_driver, subminor);
+	if (!interface)
+		return -ENODEV;
+
+	sisusb = usb_get_intfdata(interface);
+	if (!sisusb)
+		return -ENODEV;
+
+	mutex_lock(&sisusb->lock);
+
+	if (!sisusb->present || !sisusb->ready) {
+		mutex_unlock(&sisusb->lock);
+		return -ENODEV;
+	}
+
+	if (sisusb->isopen) {
+		mutex_unlock(&sisusb->lock);
+		return -EBUSY;
+	}
+
+	if (!sisusb->devinit) {
+		if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH ||
+				sisusb->sisusb_dev->speed >= USB_SPEED_SUPER) {
+			if (sisusb_init_gfxdevice(sisusb, 0)) {
+				mutex_unlock(&sisusb->lock);
+				dev_err(&sisusb->sisusb_dev->dev,
+						"Failed to initialize device\n");
+				return -EIO;
+			}
+		} else {
+			mutex_unlock(&sisusb->lock);
+			dev_err(&sisusb->sisusb_dev->dev,
+					"Device not attached to USB 2.0 hub\n");
+			return -EIO;
+		}
+	}
+
+	/* Increment usage count for our sisusb */
+	kref_get(&sisusb->kref);
+
+	sisusb->isopen = 1;
+
+	file->private_data = sisusb;
+
+	mutex_unlock(&sisusb->lock);
+
+	return 0;
+}
+
+void sisusb_delete(struct kref *kref)
+{
+	struct sisusb_usb_data *sisusb = to_sisusb_dev(kref);
+
+	if (!sisusb)
+		return;
+
+	usb_put_dev(sisusb->sisusb_dev);
+
+	sisusb->sisusb_dev = NULL;
+	sisusb_free_buffers(sisusb);
+	sisusb_free_urbs(sisusb);
+#ifdef CONFIG_USB_SISUSBVGA_CON
+	kfree(sisusb->SiS_Pr);
+#endif
+	kfree(sisusb);
+}
+
+static int sisusb_release(struct inode *inode, struct file *file)
+{
+	struct sisusb_usb_data *sisusb;
+
+	sisusb = file->private_data;
+	if (!sisusb)
+		return -ENODEV;
+
+	mutex_lock(&sisusb->lock);
+
+	if (sisusb->present) {
+		/* Wait for all URBs to finish if device still present */
+		if (!sisusb_wait_all_out_complete(sisusb))
+			sisusb_kill_all_busy(sisusb);
+	}
+
+	sisusb->isopen = 0;
+	file->private_data = NULL;
+
+	mutex_unlock(&sisusb->lock);
+
+	/* decrement the usage count on our device */
+	kref_put(&sisusb->kref, sisusb_delete);
+
+	return 0;
+}
+
+static ssize_t sisusb_read(struct file *file, char __user *buffer,
+		size_t count, loff_t *ppos)
+{
+	struct sisusb_usb_data *sisusb;
+	ssize_t bytes_read = 0;
+	int errno = 0;
+	u8 buf8;
+	u16 buf16;
+	u32 buf32, address;
+
+	sisusb = file->private_data;
+	if (!sisusb)
+		return -ENODEV;
+
+	mutex_lock(&sisusb->lock);
+
+	/* Sanity check */
+	if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) {
+		mutex_unlock(&sisusb->lock);
+		return -ENODEV;
+	}
+
+	if ((*ppos) >= SISUSB_PCI_PSEUDO_IOPORTBASE &&
+			(*ppos) <  SISUSB_PCI_PSEUDO_IOPORTBASE + 128) {
+
+		address = (*ppos) - SISUSB_PCI_PSEUDO_IOPORTBASE +
+				SISUSB_PCI_IOPORTBASE;
+
+		/* Read i/o ports
+		 * Byte, word and long(32) can be read. As this
+		 * emulates inX instructions, the data returned is
+		 * in machine-endianness.
+		 */
+		switch (count) {
+		case 1:
+			if (sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO,
+					address, &buf8))
+				errno = -EIO;
+			else if (put_user(buf8, (u8 __user *)buffer))
+				errno = -EFAULT;
+			else
+				bytes_read = 1;
+
+			break;
+
+		case 2:
+			if (sisusb_read_memio_word(sisusb, SISUSB_TYPE_IO,
+					address, &buf16))
+				errno = -EIO;
+			else if (put_user(buf16, (u16 __user *)buffer))
+				errno = -EFAULT;
+			else
+				bytes_read = 2;
+
+			break;
+
+		case 4:
+			if (sisusb_read_memio_long(sisusb, SISUSB_TYPE_IO,
+					address, &buf32))
+				errno = -EIO;
+			else if (put_user(buf32, (u32 __user *)buffer))
+				errno = -EFAULT;
+			else
+				bytes_read = 4;
+
+			break;
+
+		default:
+			errno = -EIO;
+
+		}
+
+	} else if ((*ppos) >= SISUSB_PCI_PSEUDO_MEMBASE && (*ppos) <
+			SISUSB_PCI_PSEUDO_MEMBASE + sisusb->vramsize) {
+
+		address = (*ppos) - SISUSB_PCI_PSEUDO_MEMBASE +
+				SISUSB_PCI_MEMBASE;
+
+		/* Read video ram
+		 * Remember: Data delivered is never endian-corrected
+		 */
+		errno = sisusb_read_mem_bulk(sisusb, address,
+				NULL, count, buffer, &bytes_read);
+
+		if (bytes_read)
+			errno = bytes_read;
+
+	} else  if ((*ppos) >= SISUSB_PCI_PSEUDO_MMIOBASE &&
+				(*ppos) <  SISUSB_PCI_PSEUDO_MMIOBASE +
+				SISUSB_PCI_MMIOSIZE) {
+
+		address = (*ppos) - SISUSB_PCI_PSEUDO_MMIOBASE +
+				SISUSB_PCI_MMIOBASE;
+
+		/* Read MMIO
+		 * Remember: Data delivered is never endian-corrected
+		 */
+		errno = sisusb_read_mem_bulk(sisusb, address,
+				NULL, count, buffer, &bytes_read);
+
+		if (bytes_read)
+			errno = bytes_read;
+
+	} else  if ((*ppos) >= SISUSB_PCI_PSEUDO_PCIBASE &&
+			(*ppos) <= SISUSB_PCI_PSEUDO_PCIBASE + 0x5c) {
+
+		if (count != 4) {
+			mutex_unlock(&sisusb->lock);
+			return -EINVAL;
+		}
+
+		address = (*ppos) - SISUSB_PCI_PSEUDO_PCIBASE;
+
+		/* Read PCI config register
+		 * Return value delivered in machine endianness.
+		 */
+		if (sisusb_read_pci_config(sisusb, address, &buf32))
+			errno = -EIO;
+		else if (put_user(buf32, (u32 __user *)buffer))
+			errno = -EFAULT;
+		else
+			bytes_read = 4;
+
+	} else {
+
+		errno = -EBADFD;
+
+	}
+
+	(*ppos) += bytes_read;
+
+	mutex_unlock(&sisusb->lock);
+
+	return errno ? errno : bytes_read;
+}
+
+static ssize_t sisusb_write(struct file *file, const char __user *buffer,
+		size_t count, loff_t *ppos)
+{
+	struct sisusb_usb_data *sisusb;
+	int errno = 0;
+	ssize_t bytes_written = 0;
+	u8 buf8;
+	u16 buf16;
+	u32 buf32, address;
+
+	sisusb = file->private_data;
+	if (!sisusb)
+		return -ENODEV;
+
+	mutex_lock(&sisusb->lock);
+
+	/* Sanity check */
+	if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) {
+		mutex_unlock(&sisusb->lock);
+		return -ENODEV;
+	}
+
+	if ((*ppos) >= SISUSB_PCI_PSEUDO_IOPORTBASE &&
+			(*ppos) <  SISUSB_PCI_PSEUDO_IOPORTBASE + 128) {
+
+		address = (*ppos) - SISUSB_PCI_PSEUDO_IOPORTBASE +
+				SISUSB_PCI_IOPORTBASE;
+
+		/* Write i/o ports
+		 * Byte, word and long(32) can be written. As this
+		 * emulates outX instructions, the data is expected
+		 * in machine-endianness.
+		 */
+		switch (count) {
+		case 1:
+			if (get_user(buf8, (u8 __user *)buffer))
+				errno = -EFAULT;
+			else if (sisusb_write_memio_byte(sisusb,
+					SISUSB_TYPE_IO, address, buf8))
+				errno = -EIO;
+			else
+				bytes_written = 1;
+
+			break;
+
+		case 2:
+			if (get_user(buf16, (u16 __user *)buffer))
+				errno = -EFAULT;
+			else if (sisusb_write_memio_word(sisusb,
+					SISUSB_TYPE_IO, address, buf16))
+				errno = -EIO;
+			else
+				bytes_written = 2;
+
+			break;
+
+		case 4:
+			if (get_user(buf32, (u32 __user *)buffer))
+				errno = -EFAULT;
+			else if (sisusb_write_memio_long(sisusb,
+					SISUSB_TYPE_IO, address, buf32))
+				errno = -EIO;
+			else
+				bytes_written = 4;
+
+			break;
+
+		default:
+			errno = -EIO;
+		}
+
+	} else if ((*ppos) >= SISUSB_PCI_PSEUDO_MEMBASE &&
+			(*ppos) <  SISUSB_PCI_PSEUDO_MEMBASE +
+			sisusb->vramsize) {
+
+		address = (*ppos) - SISUSB_PCI_PSEUDO_MEMBASE +
+				SISUSB_PCI_MEMBASE;
+
+		/* Write video ram.
+		 * Buffer is copied 1:1, therefore, on big-endian
+		 * machines, the data must be swapped by userland
+		 * in advance (if applicable; no swapping in 8bpp
+		 * mode or if YUV data is being transferred).
+		 */
+		errno = sisusb_write_mem_bulk(sisusb, address, NULL,
+				count, buffer, 0, &bytes_written);
+
+		if (bytes_written)
+			errno = bytes_written;
+
+	} else  if ((*ppos) >= SISUSB_PCI_PSEUDO_MMIOBASE &&
+			(*ppos) <  SISUSB_PCI_PSEUDO_MMIOBASE +
+			SISUSB_PCI_MMIOSIZE) {
+
+		address = (*ppos) - SISUSB_PCI_PSEUDO_MMIOBASE +
+				SISUSB_PCI_MMIOBASE;
+
+		/* Write MMIO.
+		 * Buffer is copied 1:1, therefore, on big-endian
+		 * machines, the data must be swapped by userland
+		 * in advance.
+		 */
+		errno = sisusb_write_mem_bulk(sisusb, address, NULL,
+				count, buffer, 0, &bytes_written);
+
+		if (bytes_written)
+			errno = bytes_written;
+
+	} else  if ((*ppos) >= SISUSB_PCI_PSEUDO_PCIBASE &&
+				(*ppos) <= SISUSB_PCI_PSEUDO_PCIBASE +
+				SISUSB_PCI_PCONFSIZE) {
+
+		if (count != 4) {
+			mutex_unlock(&sisusb->lock);
+			return -EINVAL;
+		}
+
+		address = (*ppos) - SISUSB_PCI_PSEUDO_PCIBASE;
+
+		/* Write PCI config register.
+		 * Given value expected in machine endianness.
+		 */
+		if (get_user(buf32, (u32 __user *)buffer))
+			errno = -EFAULT;
+		else if (sisusb_write_pci_config(sisusb, address, buf32))
+			errno = -EIO;
+		else
+			bytes_written = 4;
+
+
+	} else {
+
+		/* Error */
+		errno = -EBADFD;
+
+	}
+
+	(*ppos) += bytes_written;
+
+	mutex_unlock(&sisusb->lock);
+
+	return errno ? errno : bytes_written;
+}
+
+static loff_t sisusb_lseek(struct file *file, loff_t offset, int orig)
+{
+	struct sisusb_usb_data *sisusb;
+	loff_t ret;
+
+	sisusb = file->private_data;
+	if (!sisusb)
+		return -ENODEV;
+
+	mutex_lock(&sisusb->lock);
+
+	/* Sanity check */
+	if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) {
+		mutex_unlock(&sisusb->lock);
+		return -ENODEV;
+	}
+
+	ret = no_seek_end_llseek(file, offset, orig);
+
+	mutex_unlock(&sisusb->lock);
+	return ret;
+}
+
+static int sisusb_handle_command(struct sisusb_usb_data *sisusb,
+		struct sisusb_command *y, unsigned long arg)
+{
+	int	retval, length;
+	u32	port, address;
+
+	/* All our commands require the device
+	 * to be initialized.
+	 */
+	if (!sisusb->devinit)
+		return -ENODEV;
+
+	port = y->data3 -
+		SISUSB_PCI_PSEUDO_IOPORTBASE +
+		SISUSB_PCI_IOPORTBASE;
+
+	switch (y->operation) {
+	case SUCMD_GET:
+		retval = sisusb_getidxreg(sisusb, port, y->data0, &y->data1);
+		if (!retval) {
+			if (copy_to_user((void __user *)arg, y, sizeof(*y)))
+				retval = -EFAULT;
+		}
+		break;
+
+	case SUCMD_SET:
+		retval = sisusb_setidxreg(sisusb, port, y->data0, y->data1);
+		break;
+
+	case SUCMD_SETOR:
+		retval = sisusb_setidxregor(sisusb, port, y->data0, y->data1);
+		break;
+
+	case SUCMD_SETAND:
+		retval = sisusb_setidxregand(sisusb, port, y->data0, y->data1);
+		break;
+
+	case SUCMD_SETANDOR:
+		retval = sisusb_setidxregandor(sisusb, port, y->data0,
+				y->data1, y->data2);
+		break;
+
+	case SUCMD_SETMASK:
+		retval = sisusb_setidxregmask(sisusb, port, y->data0,
+				y->data1, y->data2);
+		break;
+
+	case SUCMD_CLRSCR:
+		/* Gfx core must be initialized */
+		if (!sisusb->gfxinit)
+			return -ENODEV;
+
+		length = (y->data0 << 16) | (y->data1 << 8) | y->data2;
+		address = y->data3 - SISUSB_PCI_PSEUDO_MEMBASE +
+				SISUSB_PCI_MEMBASE;
+		retval = sisusb_clear_vram(sisusb, address, length);
+		break;
+
+	case SUCMD_HANDLETEXTMODE:
+		retval = 0;
+#ifdef CONFIG_USB_SISUSBVGA_CON
+		/* Gfx core must be initialized, SiS_Pr must exist */
+		if (!sisusb->gfxinit || !sisusb->SiS_Pr)
+			return -ENODEV;
+
+		switch (y->data0) {
+		case 0:
+			retval = sisusb_reset_text_mode(sisusb, 0);
+			break;
+		case 1:
+			sisusb->textmodedestroyed = 1;
+			break;
+		}
+#endif
+		break;
+
+#ifdef CONFIG_USB_SISUSBVGA_CON
+	case SUCMD_SETMODE:
+		/* Gfx core must be initialized, SiS_Pr must exist */
+		if (!sisusb->gfxinit || !sisusb->SiS_Pr)
+			return -ENODEV;
+
+		retval = 0;
+
+		sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30;
+		sisusb->SiS_Pr->sisusb = (void *)sisusb;
+
+		if (SiSUSBSetMode(sisusb->SiS_Pr, y->data3))
+			retval = -EINVAL;
+
+		break;
+
+	case SUCMD_SETVESAMODE:
+		/* Gfx core must be initialized, SiS_Pr must exist */
+		if (!sisusb->gfxinit || !sisusb->SiS_Pr)
+			return -ENODEV;
+
+		retval = 0;
+
+		sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30;
+		sisusb->SiS_Pr->sisusb = (void *)sisusb;
+
+		if (SiSUSBSetVESAMode(sisusb->SiS_Pr, y->data3))
+			retval = -EINVAL;
+
+		break;
+#endif
+
+	default:
+		retval = -EINVAL;
+	}
+
+	if (retval > 0)
+		retval = -EIO;
+
+	return retval;
+}
+
+static long sisusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct sisusb_usb_data *sisusb;
+	struct sisusb_info x;
+	struct sisusb_command y;
+	long retval = 0;
+	u32 __user *argp = (u32 __user *)arg;
+
+	sisusb = file->private_data;
+	if (!sisusb)
+		return -ENODEV;
+
+	mutex_lock(&sisusb->lock);
+
+	/* Sanity check */
+	if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) {
+		retval = -ENODEV;
+		goto err_out;
+	}
+
+	switch (cmd) {
+	case SISUSB_GET_CONFIG_SIZE:
+
+		if (put_user(sizeof(x), argp))
+			retval = -EFAULT;
+
+		break;
+
+	case SISUSB_GET_CONFIG:
+
+		x.sisusb_id = SISUSB_ID;
+		x.sisusb_version = SISUSB_VERSION;
+		x.sisusb_revision = SISUSB_REVISION;
+		x.sisusb_patchlevel = SISUSB_PATCHLEVEL;
+		x.sisusb_gfxinit = sisusb->gfxinit;
+		x.sisusb_vrambase = SISUSB_PCI_PSEUDO_MEMBASE;
+		x.sisusb_mmiobase = SISUSB_PCI_PSEUDO_MMIOBASE;
+		x.sisusb_iobase = SISUSB_PCI_PSEUDO_IOPORTBASE;
+		x.sisusb_pcibase = SISUSB_PCI_PSEUDO_PCIBASE;
+		x.sisusb_vramsize = sisusb->vramsize;
+		x.sisusb_minor = sisusb->minor;
+		x.sisusb_fbdevactive = 0;
+#ifdef CONFIG_USB_SISUSBVGA_CON
+		x.sisusb_conactive  = sisusb->haveconsole ? 1 : 0;
+#else
+		x.sisusb_conactive  = 0;
+#endif
+		memset(x.sisusb_reserved, 0, sizeof(x.sisusb_reserved));
+
+		if (copy_to_user((void __user *)arg, &x, sizeof(x)))
+			retval = -EFAULT;
+
+		break;
+
+	case SISUSB_COMMAND:
+
+		if (copy_from_user(&y, (void __user *)arg, sizeof(y)))
+			retval = -EFAULT;
+		else
+			retval = sisusb_handle_command(sisusb, &y, arg);
+
+		break;
+
+	default:
+		retval = -ENOTTY;
+		break;
+	}
+
+err_out:
+	mutex_unlock(&sisusb->lock);
+	return retval;
+}
+
+#ifdef CONFIG_COMPAT
+static long sisusb_compat_ioctl(struct file *f, unsigned int cmd,
+		unsigned long arg)
+{
+	switch (cmd) {
+	case SISUSB_GET_CONFIG_SIZE:
+	case SISUSB_GET_CONFIG:
+	case SISUSB_COMMAND:
+		return sisusb_ioctl(f, cmd, arg);
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+#endif
+
+static const struct file_operations usb_sisusb_fops = {
+	.owner =	THIS_MODULE,
+	.open =		sisusb_open,
+	.release =	sisusb_release,
+	.read =		sisusb_read,
+	.write =	sisusb_write,
+	.llseek =	sisusb_lseek,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = sisusb_compat_ioctl,
+#endif
+	.unlocked_ioctl = sisusb_ioctl
+};
+
+static struct usb_class_driver usb_sisusb_class = {
+	.name =		"sisusbvga%d",
+	.fops =		&usb_sisusb_fops,
+	.minor_base =	SISUSB_MINOR
+};
+
+static int sisusb_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct sisusb_usb_data *sisusb;
+	int retval = 0, i;
+	static const u8 ep_addresses[] = {
+		SISUSB_EP_GFX_IN | USB_DIR_IN,
+		SISUSB_EP_GFX_OUT | USB_DIR_OUT,
+		SISUSB_EP_GFX_BULK_OUT | USB_DIR_OUT,
+		SISUSB_EP_GFX_LBULK_OUT | USB_DIR_OUT,
+		SISUSB_EP_BRIDGE_IN | USB_DIR_IN,
+		SISUSB_EP_BRIDGE_OUT | USB_DIR_OUT,
+		0};
+
+	/* Are the expected endpoints present? */
+	if (!usb_check_bulk_endpoints(intf, ep_addresses)) {
+		dev_err(&intf->dev, "Invalid USB2VGA device\n");
+		return -EINVAL;
+	}
+
+	dev_info(&dev->dev, "USB2VGA dongle found at address %d\n",
+			dev->devnum);
+
+	/* Allocate memory for our private */
+	sisusb = kzalloc(sizeof(*sisusb), GFP_KERNEL);
+	if (!sisusb)
+		return -ENOMEM;
+
+	kref_init(&sisusb->kref);
+
+	mutex_init(&(sisusb->lock));
+
+	sisusb->sisusb_dev = dev;
+	sisusb->vrambase   = SISUSB_PCI_MEMBASE;
+	sisusb->mmiobase   = SISUSB_PCI_MMIOBASE;
+	sisusb->mmiosize   = SISUSB_PCI_MMIOSIZE;
+	sisusb->ioportbase = SISUSB_PCI_IOPORTBASE;
+	/* Everything else is zero */
+
+	/* Register device */
+	retval = usb_register_dev(intf, &usb_sisusb_class);
+	if (retval) {
+		dev_err(&sisusb->sisusb_dev->dev,
+				"Failed to get a minor for device %d\n",
+				dev->devnum);
+		retval = -ENODEV;
+		goto error_1;
+	}
+
+	sisusb->minor = intf->minor;
+
+	/* Allocate buffers */
+	sisusb->ibufsize = SISUSB_IBUF_SIZE;
+	sisusb->ibuf = kmalloc(SISUSB_IBUF_SIZE, GFP_KERNEL);
+	if (!sisusb->ibuf) {
+		retval = -ENOMEM;
+		goto error_2;
+	}
+
+	sisusb->numobufs = 0;
+	sisusb->obufsize = SISUSB_OBUF_SIZE;
+	for (i = 0; i < NUMOBUFS; i++) {
+		sisusb->obuf[i] = kmalloc(SISUSB_OBUF_SIZE, GFP_KERNEL);
+		if (!sisusb->obuf[i]) {
+			if (i == 0) {
+				retval = -ENOMEM;
+				goto error_3;
+			}
+			break;
+		}
+		sisusb->numobufs++;
+	}
+
+	/* Allocate URBs */
+	sisusb->sisurbin = usb_alloc_urb(0, GFP_KERNEL);
+	if (!sisusb->sisurbin) {
+		retval = -ENOMEM;
+		goto error_3;
+	}
+	sisusb->completein = 1;
+
+	for (i = 0; i < sisusb->numobufs; i++) {
+		sisusb->sisurbout[i] = usb_alloc_urb(0, GFP_KERNEL);
+		if (!sisusb->sisurbout[i]) {
+			retval = -ENOMEM;
+			goto error_4;
+		}
+		sisusb->urbout_context[i].sisusb = (void *)sisusb;
+		sisusb->urbout_context[i].urbindex = i;
+		sisusb->urbstatus[i] = 0;
+	}
+
+	dev_info(&sisusb->sisusb_dev->dev, "Allocated %d output buffers\n",
+			sisusb->numobufs);
+
+#ifdef CONFIG_USB_SISUSBVGA_CON
+	/* Allocate our SiS_Pr */
+	sisusb->SiS_Pr = kmalloc(sizeof(struct SiS_Private), GFP_KERNEL);
+	if (!sisusb->SiS_Pr) {
+		retval = -ENOMEM;
+		goto error_4;
+	}
+#endif
+
+	/* Do remaining init stuff */
+
+	init_waitqueue_head(&sisusb->wait_q);
+
+	usb_set_intfdata(intf, sisusb);
+
+	usb_get_dev(sisusb->sisusb_dev);
+
+	sisusb->present = 1;
+
+	if (dev->speed == USB_SPEED_HIGH || dev->speed >= USB_SPEED_SUPER) {
+		int initscreen = 1;
+#ifdef CONFIG_USB_SISUSBVGA_CON
+		if (sisusb_first_vc > 0 && sisusb_last_vc > 0 &&
+				sisusb_first_vc <= sisusb_last_vc &&
+				sisusb_last_vc <= MAX_NR_CONSOLES)
+			initscreen = 0;
+#endif
+		if (sisusb_init_gfxdevice(sisusb, initscreen))
+			dev_err(&sisusb->sisusb_dev->dev,
+					"Failed to early initialize device\n");
+
+	} else
+		dev_info(&sisusb->sisusb_dev->dev,
+				"Not attached to USB 2.0 hub, deferring init\n");
+
+	sisusb->ready = 1;
+
+#ifdef SISUSBENDIANTEST
+	dev_dbg(&sisusb->sisusb_dev->dev, "*** RWTEST ***\n");
+	sisusb_testreadwrite(sisusb);
+	dev_dbg(&sisusb->sisusb_dev->dev, "*** RWTEST END ***\n");
+#endif
+
+#ifdef CONFIG_USB_SISUSBVGA_CON
+	sisusb_console_init(sisusb, sisusb_first_vc, sisusb_last_vc);
+#endif
+
+	return 0;
+
+error_4:
+	sisusb_free_urbs(sisusb);
+error_3:
+	sisusb_free_buffers(sisusb);
+error_2:
+	usb_deregister_dev(intf, &usb_sisusb_class);
+error_1:
+	kfree(sisusb);
+	return retval;
+}
+
+static void sisusb_disconnect(struct usb_interface *intf)
+{
+	struct sisusb_usb_data *sisusb;
+
+	/* This should *not* happen */
+	sisusb = usb_get_intfdata(intf);
+	if (!sisusb)
+		return;
+
+#ifdef CONFIG_USB_SISUSBVGA_CON
+	sisusb_console_exit(sisusb);
+#endif
+
+	usb_deregister_dev(intf, &usb_sisusb_class);
+
+	mutex_lock(&sisusb->lock);
+
+	/* Wait for all URBs to complete and kill them in case (MUST do) */
+	if (!sisusb_wait_all_out_complete(sisusb))
+		sisusb_kill_all_busy(sisusb);
+
+	usb_set_intfdata(intf, NULL);
+
+	sisusb->present = 0;
+	sisusb->ready = 0;
+
+	mutex_unlock(&sisusb->lock);
+
+	/* decrement our usage count */
+	kref_put(&sisusb->kref, sisusb_delete);
+}
+
+static const struct usb_device_id sisusb_table[] = {
+	{ USB_DEVICE(0x0711, 0x0550) },
+	{ USB_DEVICE(0x0711, 0x0900) },
+	{ USB_DEVICE(0x0711, 0x0901) },
+	{ USB_DEVICE(0x0711, 0x0902) },
+	{ USB_DEVICE(0x0711, 0x0903) },
+	{ USB_DEVICE(0x0711, 0x0918) },
+	{ USB_DEVICE(0x0711, 0x0920) },
+	{ USB_DEVICE(0x0711, 0x0950) },
+	{ USB_DEVICE(0x0711, 0x5200) },
+	{ USB_DEVICE(0x182d, 0x021c) },
+	{ USB_DEVICE(0x182d, 0x0269) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, sisusb_table);
+
+static struct usb_driver sisusb_driver = {
+	.name =		"sisusb",
+	.probe =	sisusb_probe,
+	.disconnect =	sisusb_disconnect,
+	.id_table =	sisusb_table,
+};
+
+static int __init usb_sisusb_init(void)
+{
+
+#ifdef CONFIG_USB_SISUSBVGA_CON
+	sisusb_init_concode();
+#endif
+
+	return usb_register(&sisusb_driver);
+}
+
+static void __exit usb_sisusb_exit(void)
+{
+	usb_deregister(&sisusb_driver);
+}
+
+module_init(usb_sisusb_init);
+module_exit(usb_sisusb_exit);
+
+MODULE_AUTHOR("Thomas Winischhofer <thomas@winischhofer.net>");
+MODULE_DESCRIPTION("sisusbvga - Driver for Net2280/SiS315-based USB2VGA dongles");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/usb/misc/sisusbvga/sisusb.h b/drivers/usb/misc/sisusbvga/sisusb.h
new file mode 100644
index 000000000..c0fb9e1c5
--- /dev/null
+++ b/drivers/usb/misc/sisusbvga/sisusb.h
@@ -0,0 +1,299 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
+/*
+ * sisusb - usb kernel driver for Net2280/SiS315 based USB2VGA dongles
+ *
+ * Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria
+ *
+ * If distributed as part of the Linux kernel, this code is licensed under the
+ * terms of the GPL v2.
+ *
+ * Otherwise, the following license terms apply:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1) Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2) Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3) The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Author:	Thomas Winischhofer <thomas@winischhofer.net>
+ *
+ */
+
+#ifndef _SISUSB_H_
+#define _SISUSB_H_
+
+#include <linux/mutex.h>
+
+/* Version Information */
+
+#define SISUSB_VERSION		0
+#define SISUSB_REVISION		0
+#define SISUSB_PATCHLEVEL	8
+
+/* Include console and mode switching code? */
+
+#include <linux/console.h>
+#include <linux/vt_kern.h>
+#include "sisusb_struct.h"
+
+/* USB related */
+
+#define SISUSB_MINOR		133	/* official */
+
+/* Size of the sisusb input/output buffers */
+#define SISUSB_IBUF_SIZE  0x01000
+#define SISUSB_OBUF_SIZE  0x10000	/* fixed */
+
+#define NUMOBUFS 8		/* max number of output buffers/output URBs */
+
+/* About endianness:
+ *
+ * 1) I/O ports, PCI config registers. The read/write()
+ *    calls emulate inX/outX. Hence, the data is
+ *    expected/delivered in machine endiannes by this
+ *    driver.
+ * 2) Video memory. The data is copied 1:1. There is
+ *    no swapping. Ever. This means for userland that
+ *    the data has to be prepared properly. (Hint:
+ *    think graphics data format, command queue,
+ *    hardware cursor.)
+ * 3) MMIO. Data is copied 1:1. MMIO must be swapped
+ *    properly by userland.
+ *
+ */
+
+#ifdef __BIG_ENDIAN
+#define SISUSB_CORRECT_ENDIANNESS_PACKET(p)		\
+	do {						\
+		p->header  = cpu_to_le16(p->header);	\
+		p->address = cpu_to_le32(p->address);	\
+		p->data    = cpu_to_le32(p->data);	\
+	} while(0)
+#else
+#define SISUSB_CORRECT_ENDIANNESS_PACKET(p)
+#endif
+
+struct sisusb_usb_data;
+
+struct sisusb_urb_context {	/* urb->context for outbound bulk URBs */
+	struct sisusb_usb_data *sisusb;
+	int urbindex;
+	int *actual_length;
+};
+
+struct sisusb_usb_data {
+	struct usb_device *sisusb_dev;
+	struct usb_interface *interface;
+	struct kref kref;
+	wait_queue_head_t wait_q;	/* for syncind and timeouts */
+	struct mutex lock;	/* general race avoidance */
+	unsigned int ifnum;	/* interface number of the USB device */
+	int minor;		/* minor (for logging clarity) */
+	int isopen;		/* !=0 if open */
+	int present;		/* !=0 if device is present on the bus */
+	int ready;		/* !=0 if device is ready for userland */
+	int numobufs;		/* number of obufs = number of out urbs */
+	char *obuf[NUMOBUFS], *ibuf;	/* transfer buffers */
+	int obufsize, ibufsize;
+	struct urb *sisurbout[NUMOBUFS];
+	struct urb *sisurbin;
+	unsigned char urbstatus[NUMOBUFS];
+	unsigned char completein;
+	struct sisusb_urb_context urbout_context[NUMOBUFS];
+	unsigned long flagb0;
+	unsigned long vrambase;	/* framebuffer base */
+	unsigned int vramsize;	/* framebuffer size (bytes) */
+	unsigned long mmiobase;
+	unsigned int mmiosize;
+	unsigned long ioportbase;
+	unsigned char devinit;	/* device initialized? */
+	unsigned char gfxinit;	/* graphics core initialized? */
+	unsigned short chipid, chipvendor;
+	unsigned short chiprevision;
+#ifdef CONFIG_USB_SISUSBVGA_CON
+	struct SiS_Private *SiS_Pr;
+	unsigned long scrbuf;
+	unsigned int scrbuf_size;
+	int haveconsole, con_first, con_last;
+	int havethisconsole[MAX_NR_CONSOLES];
+	int textmodedestroyed;
+	unsigned int sisusb_num_columns;	/* real number, not vt's idea */
+	int cur_start_addr, con_rolled_over;
+	int sisusb_cursor_loc, bad_cursor_pos;
+	int sisusb_cursor_size_from;
+	int sisusb_cursor_size_to;
+	int current_font_height, current_font_512;
+	int font_backup_size, font_backup_height, font_backup_512;
+	char *font_backup;
+	int font_slot;
+	struct vc_data *sisusb_display_fg;
+	int is_gfx;
+	int con_blanked;
+#endif
+};
+
+#define to_sisusb_dev(d) container_of(d, struct sisusb_usb_data, kref)
+
+/* USB transport related */
+
+/* urbstatus */
+#define SU_URB_BUSY   1
+#define SU_URB_ALLOC  2
+
+/* Endpoints */
+
+#define SISUSB_EP_GFX_IN	0x0e	/* gfx std packet out(0e)/in(8e) */
+#define SISUSB_EP_GFX_OUT	0x0e
+
+#define SISUSB_EP_GFX_BULK_OUT	0x01	/* gfx mem bulk out/in */
+#define SISUSB_EP_GFX_BULK_IN	0x02	/* ? 2 is "OUT" ? */
+
+#define SISUSB_EP_GFX_LBULK_OUT	0x03	/* gfx large mem bulk out */
+
+#define SISUSB_EP_UNKNOWN_04	0x04	/* ? 4 is "OUT" ? - unused */
+
+#define SISUSB_EP_BRIDGE_IN	0x0d	/* Net2280 out(0d)/in(8d) */
+#define SISUSB_EP_BRIDGE_OUT	0x0d
+
+#define SISUSB_TYPE_MEM		0
+#define SISUSB_TYPE_IO		1
+
+struct sisusb_packet {
+	unsigned short header;
+	u32 address;
+	u32 data;
+} __attribute__ ((__packed__));
+
+#define CLEARPACKET(packet) memset(packet, 0, 10)
+
+/* PCI bridge related */
+
+#define SISUSB_PCI_MEMBASE	0xd0000000
+#define SISUSB_PCI_MMIOBASE	0xe4000000
+#define SISUSB_PCI_IOPORTBASE	0x0000d000
+
+#define SISUSB_PCI_PSEUDO_MEMBASE	0x10000000
+#define SISUSB_PCI_PSEUDO_MMIOBASE	0x20000000
+#define SISUSB_PCI_PSEUDO_IOPORTBASE	0x0000d000
+#define SISUSB_PCI_PSEUDO_PCIBASE	0x00010000
+
+#define SISUSB_PCI_MMIOSIZE	(128*1024)
+#define SISUSB_PCI_PCONFSIZE	0x5c
+
+/* graphics core related */
+
+#define AROFFSET	0x40
+#define ARROFFSET	0x41
+#define GROFFSET	0x4e
+#define SROFFSET	0x44
+#define CROFFSET	0x54
+#define MISCROFFSET	0x4c
+#define MISCWOFFSET	0x42
+#define INPUTSTATOFFSET 0x5A
+#define PART1OFFSET	0x04
+#define PART2OFFSET	0x10
+#define PART3OFFSET	0x12
+#define PART4OFFSET	0x14
+#define PART5OFFSET	0x16
+#define CAPTUREOFFSET	0x00
+#define VIDEOOFFSET	0x02
+#define COLREGOFFSET	0x48
+#define PELMASKOFFSET	0x46
+#define VGAENABLE	0x43
+
+#define SISAR		SISUSB_PCI_IOPORTBASE + AROFFSET
+#define SISARR		SISUSB_PCI_IOPORTBASE + ARROFFSET
+#define SISGR		SISUSB_PCI_IOPORTBASE + GROFFSET
+#define SISSR		SISUSB_PCI_IOPORTBASE + SROFFSET
+#define SISCR		SISUSB_PCI_IOPORTBASE + CROFFSET
+#define SISMISCR	SISUSB_PCI_IOPORTBASE + MISCROFFSET
+#define SISMISCW	SISUSB_PCI_IOPORTBASE + MISCWOFFSET
+#define SISINPSTAT	SISUSB_PCI_IOPORTBASE + INPUTSTATOFFSET
+#define SISPART1	SISUSB_PCI_IOPORTBASE + PART1OFFSET
+#define SISPART2	SISUSB_PCI_IOPORTBASE + PART2OFFSET
+#define SISPART3	SISUSB_PCI_IOPORTBASE + PART3OFFSET
+#define SISPART4	SISUSB_PCI_IOPORTBASE + PART4OFFSET
+#define SISPART5	SISUSB_PCI_IOPORTBASE + PART5OFFSET
+#define SISCAP		SISUSB_PCI_IOPORTBASE + CAPTUREOFFSET
+#define SISVID		SISUSB_PCI_IOPORTBASE + VIDEOOFFSET
+#define SISCOLIDXR	SISUSB_PCI_IOPORTBASE + COLREGOFFSET - 1
+#define SISCOLIDX	SISUSB_PCI_IOPORTBASE + COLREGOFFSET
+#define SISCOLDATA	SISUSB_PCI_IOPORTBASE + COLREGOFFSET + 1
+#define SISCOL2IDX	SISPART5
+#define SISCOL2DATA	SISPART5 + 1
+#define SISPEL		SISUSB_PCI_IOPORTBASE + PELMASKOFFSET
+#define SISVGAEN	SISUSB_PCI_IOPORTBASE + VGAENABLE
+#define SISDACA		SISCOLIDX
+#define SISDACD		SISCOLDATA
+
+/* ioctl related */
+
+/* Structure argument for SISUSB_GET_INFO ioctl  */
+struct sisusb_info {
+	__u32 sisusb_id;	/* for identifying sisusb */
+#define SISUSB_ID  0x53495355	/* Identify myself with 'SISU' */
+	__u8 sisusb_version;
+	__u8 sisusb_revision;
+	__u8 sisusb_patchlevel;
+	__u8 sisusb_gfxinit;	/* graphics core initialized? */
+
+	__u32 sisusb_vrambase;
+	__u32 sisusb_mmiobase;
+	__u32 sisusb_iobase;
+	__u32 sisusb_pcibase;
+
+	__u32 sisusb_vramsize;	/* framebuffer size in bytes */
+
+	__u32 sisusb_minor;
+
+	__u32 sisusb_fbdevactive;	/* != 0 if framebuffer device active */
+
+	__u32 sisusb_conactive;	/* != 0 if console driver active */
+
+	__u8 sisusb_reserved[28];	/* for future use */
+};
+
+struct sisusb_command {
+	__u8 operation;		/* see below */
+	__u8 data0;		/* operation dependent */
+	__u8 data1;		/* operation dependent */
+	__u8 data2;		/* operation dependent */
+	__u32 data3;		/* operation dependent */
+	__u32 data4;		/* for future use */
+};
+
+#define SUCMD_GET	0x01	/* for all: data0 = index, data3 = port */
+#define SUCMD_SET	0x02	/* data1 = value */
+#define SUCMD_SETOR	0x03	/* data1 = or */
+#define SUCMD_SETAND	0x04	/* data1 = and */
+#define SUCMD_SETANDOR	0x05	/* data1 = and, data2 = or */
+#define SUCMD_SETMASK	0x06	/* data1 = data, data2 = mask */
+
+#define SUCMD_CLRSCR	0x07	/* data0:1:2 = length, data3 = address */
+
+#define SUCMD_HANDLETEXTMODE 0x08	/* Reset/destroy text mode */
+
+#define SUCMD_SETMODE	0x09	/* Set a display mode (data3 = SiS mode) */
+#define SUCMD_SETVESAMODE 0x0a	/* Set a display mode (data3 = VESA mode) */
+
+#define SISUSB_COMMAND		_IOWR(0xF3,0x3D,struct sisusb_command)
+#define SISUSB_GET_CONFIG_SIZE	_IOR(0xF3,0x3E,__u32)
+#define SISUSB_GET_CONFIG	_IOR(0xF3,0x3F,struct sisusb_info)
+
+#endif /* SISUSB_H */
diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c
new file mode 100644
index 000000000..fcb95fb63
--- /dev/null
+++ b/drivers/usb/misc/sisusbvga/sisusb_con.c
@@ -0,0 +1,1496 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles
+ *
+ * VGA text mode console part
+ *
+ * Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria
+ *
+ * If distributed as part of the Linux kernel, this code is licensed under the
+ * terms of the GPL v2.
+ *
+ * Otherwise, the following license terms apply:
+ *
+ * * Redistribution and use in source and binary forms, with or without
+ * * modification, are permitted provided that the following conditions
+ * * are met:
+ * * 1) Redistributions of source code must retain the above copyright
+ * *    notice, this list of conditions and the following disclaimer.
+ * * 2) Redistributions in binary form must reproduce the above copyright
+ * *    notice, this list of conditions and the following disclaimer in the
+ * *    documentation and/or other materials provided with the distribution.
+ * * 3) The name of the author may not be used to endorse or promote products
+ * *    derived from this software without specific psisusbr written permission.
+ * *
+ * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR
+ * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Author: Thomas Winischhofer <thomas@winischhofer.net>
+ *
+ * Portions based on vgacon.c which are
+ *	Created 28 Sep 1997 by Geert Uytterhoeven
+ *      Rewritten by Martin Mares <mj@ucw.cz>, July 1998
+ *      based on code Copyright (C) 1991, 1992  Linus Torvalds
+ *			    1995  Jay Estabrook
+ *
+ * A note on using in_atomic() in here: We can't handle console
+ * calls from non-schedulable context due to our USB-dependend
+ * nature. For now, this driver just ignores any calls if it
+ * detects this state.
+ *
+ */
+
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/fs.h>
+#include <linux/usb.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/string.h>
+#include <linux/kd.h>
+#include <linux/init.h>
+#include <linux/vt_kern.h>
+#include <linux/selection.h>
+#include <linux/spinlock.h>
+#include <linux/kref.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/vmalloc.h>
+
+#include "sisusb.h"
+#include "sisusb_init.h"
+
+/* vc_data -> sisusb conversion table */
+static struct sisusb_usb_data *mysisusbs[MAX_NR_CONSOLES];
+
+/* Forward declaration */
+static const struct consw sisusb_con;
+
+static inline void
+sisusbcon_memsetw(u16 *s, u16 c, unsigned int count)
+{
+	memset16(s, c, count / 2);
+}
+
+static inline void
+sisusb_initialize(struct sisusb_usb_data *sisusb)
+{
+	/* Reset cursor and start address */
+	if (sisusb_setidxreg(sisusb, SISCR, 0x0c, 0x00))
+		return;
+	if (sisusb_setidxreg(sisusb, SISCR, 0x0d, 0x00))
+		return;
+	if (sisusb_setidxreg(sisusb, SISCR, 0x0e, 0x00))
+		return;
+	sisusb_setidxreg(sisusb, SISCR, 0x0f, 0x00);
+}
+
+static inline void
+sisusbcon_set_start_address(struct sisusb_usb_data *sisusb, struct vc_data *c)
+{
+	sisusb->cur_start_addr = (c->vc_visible_origin - sisusb->scrbuf) / 2;
+
+	sisusb_setidxreg(sisusb, SISCR, 0x0c, (sisusb->cur_start_addr >> 8));
+	sisusb_setidxreg(sisusb, SISCR, 0x0d, (sisusb->cur_start_addr & 0xff));
+}
+
+void
+sisusb_set_cursor(struct sisusb_usb_data *sisusb, unsigned int location)
+{
+	if (sisusb->sisusb_cursor_loc == location)
+		return;
+
+	sisusb->sisusb_cursor_loc = location;
+
+	/* Hardware bug: Text cursor appears twice or not at all
+	 * at some positions. Work around it with the cursor skew
+	 * bits.
+	 */
+
+	if ((location & 0x0007) == 0x0007) {
+		sisusb->bad_cursor_pos = 1;
+		location--;
+		if (sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0x1f, 0x20))
+			return;
+	} else if (sisusb->bad_cursor_pos) {
+		if (sisusb_setidxregand(sisusb, SISCR, 0x0b, 0x1f))
+			return;
+		sisusb->bad_cursor_pos = 0;
+	}
+
+	if (sisusb_setidxreg(sisusb, SISCR, 0x0e, (location >> 8)))
+		return;
+	sisusb_setidxreg(sisusb, SISCR, 0x0f, (location & 0xff));
+}
+
+static inline struct sisusb_usb_data *
+sisusb_get_sisusb(unsigned short console)
+{
+	return mysisusbs[console];
+}
+
+static inline int
+sisusb_sisusb_valid(struct sisusb_usb_data *sisusb)
+{
+	if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev)
+		return 0;
+
+	return 1;
+}
+
+static struct sisusb_usb_data *
+sisusb_get_sisusb_lock_and_check(unsigned short console)
+{
+	struct sisusb_usb_data *sisusb;
+
+	/* We can't handle console calls in non-schedulable
+	 * context due to our locks and the USB transport.
+	 * So we simply ignore them. This should only affect
+	 * some calls to printk.
+	 */
+	if (in_atomic())
+		return NULL;
+
+	sisusb = sisusb_get_sisusb(console);
+	if (!sisusb)
+		return NULL;
+
+	mutex_lock(&sisusb->lock);
+
+	if (!sisusb_sisusb_valid(sisusb) ||
+	    !sisusb->havethisconsole[console]) {
+		mutex_unlock(&sisusb->lock);
+		return NULL;
+	}
+
+	return sisusb;
+}
+
+static int
+sisusb_is_inactive(struct vc_data *c, struct sisusb_usb_data *sisusb)
+{
+	if (sisusb->is_gfx ||
+	    sisusb->textmodedestroyed ||
+	    c->vc_mode != KD_TEXT)
+		return 1;
+
+	return 0;
+}
+
+/* con_startup console interface routine */
+static const char *
+sisusbcon_startup(void)
+{
+	return "SISUSBCON";
+}
+
+/* con_init console interface routine */
+static void
+sisusbcon_init(struct vc_data *c, int init)
+{
+	struct sisusb_usb_data *sisusb;
+	int cols, rows;
+
+	/* This is called by do_take_over_console(),
+	 * ie by us/under our control. It is
+	 * only called after text mode and fonts
+	 * are set up/restored.
+	 */
+
+	sisusb = sisusb_get_sisusb(c->vc_num);
+	if (!sisusb)
+		return;
+
+	mutex_lock(&sisusb->lock);
+
+	if (!sisusb_sisusb_valid(sisusb)) {
+		mutex_unlock(&sisusb->lock);
+		return;
+	}
+
+	c->vc_can_do_color = 1;
+
+	c->vc_complement_mask = 0x7700;
+
+	c->vc_hi_font_mask = sisusb->current_font_512 ? 0x0800 : 0;
+
+	sisusb->haveconsole = 1;
+
+	sisusb->havethisconsole[c->vc_num] = 1;
+
+	/* We only support 640x400 */
+	c->vc_scan_lines = 400;
+
+	c->vc_font.height = sisusb->current_font_height;
+
+	/* We only support width = 8 */
+	cols = 80;
+	rows = c->vc_scan_lines / c->vc_font.height;
+
+	/* Increment usage count for our sisusb.
+	 * Doing so saves us from upping/downing
+	 * the disconnect semaphore; we can't
+	 * lose our sisusb until this is undone
+	 * in con_deinit. For all other console
+	 * interface functions, it suffices to
+	 * use sisusb->lock and do a quick check
+	 * of sisusb for device disconnection.
+	 */
+	kref_get(&sisusb->kref);
+
+	if (!*c->uni_pagedict_loc)
+		con_set_default_unimap(c);
+
+	mutex_unlock(&sisusb->lock);
+
+	if (init) {
+		c->vc_cols = cols;
+		c->vc_rows = rows;
+	} else
+		vc_resize(c, cols, rows);
+}
+
+/* con_deinit console interface routine */
+static void
+sisusbcon_deinit(struct vc_data *c)
+{
+	struct sisusb_usb_data *sisusb;
+	int i;
+
+	/* This is called by do_take_over_console()
+	 * and others, ie not under our control.
+	 */
+
+	sisusb = sisusb_get_sisusb(c->vc_num);
+	if (!sisusb)
+		return;
+
+	mutex_lock(&sisusb->lock);
+
+	/* Clear ourselves in mysisusbs */
+	mysisusbs[c->vc_num] = NULL;
+
+	sisusb->havethisconsole[c->vc_num] = 0;
+
+	/* Free our font buffer if all consoles are gone */
+	if (sisusb->font_backup) {
+		for(i = 0; i < MAX_NR_CONSOLES; i++) {
+			if (sisusb->havethisconsole[c->vc_num])
+				break;
+		}
+		if (i == MAX_NR_CONSOLES) {
+			vfree(sisusb->font_backup);
+			sisusb->font_backup = NULL;
+		}
+	}
+
+	mutex_unlock(&sisusb->lock);
+
+	/* decrement the usage count on our sisusb */
+	kref_put(&sisusb->kref, sisusb_delete);
+}
+
+/* interface routine */
+static u8
+sisusbcon_build_attr(struct vc_data *c, u8 color, enum vc_intensity intensity,
+			    bool blink, bool underline, bool reverse,
+			    bool unused)
+{
+	u8 attr = color;
+
+	if (underline)
+		attr = (attr & 0xf0) | c->vc_ulcolor;
+	else if (intensity == VCI_HALF_BRIGHT)
+		attr = (attr & 0xf0) | c->vc_halfcolor;
+
+	if (reverse)
+		attr = ((attr) & 0x88) |
+		       ((((attr) >> 4) |
+		       ((attr) << 4)) & 0x77);
+
+	if (blink)
+		attr ^= 0x80;
+
+	if (intensity == VCI_BOLD)
+		attr ^= 0x08;
+
+	return attr;
+}
+
+/* Interface routine */
+static void
+sisusbcon_invert_region(struct vc_data *vc, u16 *p, int count)
+{
+	/* Invert a region. This is called with a pointer
+	 * to the console's internal screen buffer. So we
+	 * simply do the inversion there and rely on
+	 * a call to putc(s) to update the real screen.
+	 */
+
+	while (count--) {
+		u16 a = *p;
+
+		*p++ = ((a) & 0x88ff)        |
+		       (((a) & 0x7000) >> 4) |
+		       (((a) & 0x0700) << 4);
+	}
+}
+
+static inline void *sisusb_vaddr(const struct sisusb_usb_data *sisusb,
+		const struct vc_data *c, unsigned int x, unsigned int y)
+{
+	return (u16 *)c->vc_origin + y * sisusb->sisusb_num_columns + x;
+}
+
+static inline unsigned long sisusb_haddr(const struct sisusb_usb_data *sisusb,
+	      const struct vc_data *c, unsigned int x, unsigned int y)
+{
+	unsigned long offset = c->vc_origin - sisusb->scrbuf;
+
+	/* 2 bytes per each character */
+	offset += 2 * (y * sisusb->sisusb_num_columns + x);
+
+	return sisusb->vrambase + offset;
+}
+
+/* Interface routine */
+static void
+sisusbcon_putc(struct vc_data *c, int ch, int y, int x)
+{
+	struct sisusb_usb_data *sisusb;
+
+	sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
+	if (!sisusb)
+		return;
+
+	/* sisusb->lock is down */
+	if (sisusb_is_inactive(c, sisusb)) {
+		mutex_unlock(&sisusb->lock);
+		return;
+	}
+
+	sisusb_copy_memory(sisusb, sisusb_vaddr(sisusb, c, x, y),
+				sisusb_haddr(sisusb, c, x, y), 2);
+
+	mutex_unlock(&sisusb->lock);
+}
+
+/* Interface routine */
+static void
+sisusbcon_putcs(struct vc_data *c, const unsigned short *s,
+		         int count, int y, int x)
+{
+	struct sisusb_usb_data *sisusb;
+
+	sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
+	if (!sisusb)
+		return;
+
+	/* sisusb->lock is down */
+
+	/* Need to put the characters into the buffer ourselves,
+	 * because the vt does this AFTER calling us.
+	 */
+
+	memcpy(sisusb_vaddr(sisusb, c, x, y), s, count * 2);
+
+	if (sisusb_is_inactive(c, sisusb)) {
+		mutex_unlock(&sisusb->lock);
+		return;
+	}
+
+	sisusb_copy_memory(sisusb, sisusb_vaddr(sisusb, c, x, y),
+			sisusb_haddr(sisusb, c, x, y), count * 2);
+
+	mutex_unlock(&sisusb->lock);
+}
+
+/* Interface routine */
+static void
+sisusbcon_clear(struct vc_data *c, int y, int x, int height, int width)
+{
+	struct sisusb_usb_data *sisusb;
+	u16 eattr = c->vc_video_erase_char;
+	int i, length, cols;
+	u16 *dest;
+
+	if (width <= 0 || height <= 0)
+		return;
+
+	sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
+	if (!sisusb)
+		return;
+
+	/* sisusb->lock is down */
+
+	/* Need to clear buffer ourselves, because the vt does
+	 * this AFTER calling us.
+	 */
+
+	dest = sisusb_vaddr(sisusb, c, x, y);
+
+	cols = sisusb->sisusb_num_columns;
+
+	if (width > cols)
+		width = cols;
+
+	if (x == 0 && width >= c->vc_cols) {
+
+		sisusbcon_memsetw(dest, eattr, height * cols * 2);
+
+	} else {
+
+		for (i = height; i > 0; i--, dest += cols)
+			sisusbcon_memsetw(dest, eattr, width * 2);
+
+	}
+
+	if (sisusb_is_inactive(c, sisusb)) {
+		mutex_unlock(&sisusb->lock);
+		return;
+	}
+
+	length = ((height * cols) - x - (cols - width - x)) * 2;
+
+
+	sisusb_copy_memory(sisusb, sisusb_vaddr(sisusb, c, x, y),
+			sisusb_haddr(sisusb, c, x, y), length);
+
+	mutex_unlock(&sisusb->lock);
+}
+
+/* interface routine */
+static int
+sisusbcon_switch(struct vc_data *c)
+{
+	struct sisusb_usb_data *sisusb;
+	int length;
+
+	/* Returnvalue 0 means we have fully restored screen,
+	 *	and vt doesn't need to call do_update_region().
+	 * Returnvalue != 0 naturally means the opposite.
+	 */
+
+	sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
+	if (!sisusb)
+		return 0;
+
+	/* sisusb->lock is down */
+
+	/* Don't write to screen if in gfx mode */
+	if (sisusb_is_inactive(c, sisusb)) {
+		mutex_unlock(&sisusb->lock);
+		return 0;
+	}
+
+	/* That really should not happen. It would mean we are
+	 * being called while the vc is using its private buffer
+	 * as origin.
+	 */
+	if (c->vc_origin == (unsigned long)c->vc_screenbuf) {
+		mutex_unlock(&sisusb->lock);
+		dev_dbg(&sisusb->sisusb_dev->dev, "ASSERT ORIGIN != SCREENBUF!\n");
+		return 0;
+	}
+
+	/* Check that we don't copy too much */
+	length = min((int)c->vc_screenbuf_size,
+			(int)(sisusb->scrbuf + sisusb->scrbuf_size - c->vc_origin));
+
+	/* Restore the screen contents */
+	memcpy((u16 *)c->vc_origin, (u16 *)c->vc_screenbuf, length);
+
+	sisusb_copy_memory(sisusb, (u8 *)c->vc_origin,
+			sisusb_haddr(sisusb, c, 0, 0), length);
+
+	mutex_unlock(&sisusb->lock);
+
+	return 0;
+}
+
+/* interface routine */
+static void
+sisusbcon_save_screen(struct vc_data *c)
+{
+	struct sisusb_usb_data *sisusb;
+	int length;
+
+	/* Save the current screen contents to vc's private
+	 * buffer.
+	 */
+
+	sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
+	if (!sisusb)
+		return;
+
+	/* sisusb->lock is down */
+
+	if (sisusb_is_inactive(c, sisusb)) {
+		mutex_unlock(&sisusb->lock);
+		return;
+	}
+
+	/* Check that we don't copy too much */
+	length = min((int)c->vc_screenbuf_size,
+			(int)(sisusb->scrbuf + sisusb->scrbuf_size - c->vc_origin));
+
+	/* Save the screen contents to vc's private buffer */
+	memcpy((u16 *)c->vc_screenbuf, (u16 *)c->vc_origin, length);
+
+	mutex_unlock(&sisusb->lock);
+}
+
+/* interface routine */
+static void
+sisusbcon_set_palette(struct vc_data *c, const unsigned char *table)
+{
+	struct sisusb_usb_data *sisusb;
+	int i, j;
+
+	/* Return value not used by vt */
+
+	if (!con_is_visible(c))
+		return;
+
+	sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
+	if (!sisusb)
+		return;
+
+	/* sisusb->lock is down */
+
+	if (sisusb_is_inactive(c, sisusb)) {
+		mutex_unlock(&sisusb->lock);
+		return;
+	}
+
+	for (i = j = 0; i < 16; i++) {
+		if (sisusb_setreg(sisusb, SISCOLIDX, table[i]))
+			break;
+		if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2))
+			break;
+		if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2))
+			break;
+		if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2))
+			break;
+	}
+
+	mutex_unlock(&sisusb->lock);
+}
+
+/* interface routine */
+static int
+sisusbcon_blank(struct vc_data *c, int blank, int mode_switch)
+{
+	struct sisusb_usb_data *sisusb;
+	u8 sr1, cr17, pmreg, cr63;
+	int ret = 0;
+
+	sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
+	if (!sisusb)
+		return 0;
+
+	/* sisusb->lock is down */
+
+	if (mode_switch)
+		sisusb->is_gfx = blank ? 1 : 0;
+
+	if (sisusb_is_inactive(c, sisusb)) {
+		mutex_unlock(&sisusb->lock);
+		return 0;
+	}
+
+	switch (blank) {
+
+	case 1:		/* Normal blanking: Clear screen */
+	case -1:
+		sisusbcon_memsetw((u16 *)c->vc_origin,
+				c->vc_video_erase_char,
+				c->vc_screenbuf_size);
+		sisusb_copy_memory(sisusb, (u8 *)c->vc_origin,
+				sisusb_haddr(sisusb, c, 0, 0),
+				c->vc_screenbuf_size);
+		sisusb->con_blanked = 1;
+		ret = 1;
+		break;
+
+	default:	/* VESA blanking */
+		switch (blank) {
+		case 0: /* Unblank */
+			sr1   = 0x00;
+			cr17  = 0x80;
+			pmreg = 0x00;
+			cr63  = 0x00;
+			ret = 1;
+			sisusb->con_blanked = 0;
+			break;
+		case VESA_VSYNC_SUSPEND + 1:
+			sr1   = 0x20;
+			cr17  = 0x80;
+			pmreg = 0x80;
+			cr63  = 0x40;
+			break;
+		case VESA_HSYNC_SUSPEND + 1:
+			sr1   = 0x20;
+			cr17  = 0x80;
+			pmreg = 0x40;
+			cr63  = 0x40;
+			break;
+		case VESA_POWERDOWN + 1:
+			sr1   = 0x20;
+			cr17  = 0x00;
+			pmreg = 0xc0;
+			cr63  = 0x40;
+			break;
+		default:
+			mutex_unlock(&sisusb->lock);
+			return -EINVAL;
+		}
+
+		sisusb_setidxregandor(sisusb, SISSR, 0x01, ~0x20, sr1);
+		sisusb_setidxregandor(sisusb, SISCR, 0x17, 0x7f, cr17);
+		sisusb_setidxregandor(sisusb, SISSR, 0x1f, 0x3f, pmreg);
+		sisusb_setidxregandor(sisusb, SISCR, 0x63, 0xbf, cr63);
+
+	}
+
+	mutex_unlock(&sisusb->lock);
+
+	return ret;
+}
+
+/* interface routine */
+static void
+sisusbcon_scrolldelta(struct vc_data *c, int lines)
+{
+	struct sisusb_usb_data *sisusb;
+
+	sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
+	if (!sisusb)
+		return;
+
+	/* sisusb->lock is down */
+
+	if (sisusb_is_inactive(c, sisusb)) {
+		mutex_unlock(&sisusb->lock);
+		return;
+	}
+
+	vc_scrolldelta_helper(c, lines, sisusb->con_rolled_over,
+			(void *)sisusb->scrbuf, sisusb->scrbuf_size);
+
+	sisusbcon_set_start_address(sisusb, c);
+
+	mutex_unlock(&sisusb->lock);
+}
+
+/* Interface routine */
+static void
+sisusbcon_cursor(struct vc_data *c, int mode)
+{
+	struct sisusb_usb_data *sisusb;
+	int from, to, baseline;
+
+	sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
+	if (!sisusb)
+		return;
+
+	/* sisusb->lock is down */
+
+	if (sisusb_is_inactive(c, sisusb)) {
+		mutex_unlock(&sisusb->lock);
+		return;
+	}
+
+	if (c->vc_origin != c->vc_visible_origin) {
+		c->vc_visible_origin = c->vc_origin;
+		sisusbcon_set_start_address(sisusb, c);
+	}
+
+	if (mode == CM_ERASE) {
+		sisusb_setidxregor(sisusb, SISCR, 0x0a, 0x20);
+		sisusb->sisusb_cursor_size_to = -1;
+		mutex_unlock(&sisusb->lock);
+		return;
+	}
+
+	sisusb_set_cursor(sisusb, (c->vc_pos - sisusb->scrbuf) / 2);
+
+	baseline = c->vc_font.height - (c->vc_font.height < 10 ? 1 : 2);
+
+	switch (CUR_SIZE(c->vc_cursor_type)) {
+		case CUR_BLOCK:		from = 1;
+					to   = c->vc_font.height;
+					break;
+		case CUR_TWO_THIRDS:	from = c->vc_font.height / 3;
+					to   = baseline;
+					break;
+		case CUR_LOWER_HALF:	from = c->vc_font.height / 2;
+					to   = baseline;
+					break;
+		case CUR_LOWER_THIRD:	from = (c->vc_font.height * 2) / 3;
+					to   = baseline;
+					break;
+		case CUR_NONE:		from = 31;
+					to = 30;
+					break;
+		default:
+		case CUR_UNDERLINE:	from = baseline - 1;
+					to   = baseline;
+					break;
+	}
+
+	if (sisusb->sisusb_cursor_size_from != from ||
+	    sisusb->sisusb_cursor_size_to != to) {
+
+		sisusb_setidxreg(sisusb, SISCR, 0x0a, from);
+		sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0xe0, to);
+
+		sisusb->sisusb_cursor_size_from = from;
+		sisusb->sisusb_cursor_size_to   = to;
+	}
+
+	mutex_unlock(&sisusb->lock);
+}
+
+static bool
+sisusbcon_scroll_area(struct vc_data *c, struct sisusb_usb_data *sisusb,
+		unsigned int t, unsigned int b, enum con_scroll dir,
+		unsigned int lines)
+{
+	int cols = sisusb->sisusb_num_columns;
+	int length = ((b - t) * cols) * 2;
+	u16 eattr = c->vc_video_erase_char;
+
+	/* sisusb->lock is down */
+
+	/* Scroll an area which does not match the
+	 * visible screen's dimensions. This needs
+	 * to be done separately, as it does not
+	 * use hardware panning.
+	 */
+
+	switch (dir) {
+
+		case SM_UP:
+			memmove(sisusb_vaddr(sisusb, c, 0, t),
+					   sisusb_vaddr(sisusb, c, 0, t + lines),
+					   (b - t - lines) * cols * 2);
+			sisusbcon_memsetw(sisusb_vaddr(sisusb, c, 0, b - lines),
+					eattr, lines * cols * 2);
+			break;
+
+		case SM_DOWN:
+			memmove(sisusb_vaddr(sisusb, c, 0, t + lines),
+					   sisusb_vaddr(sisusb, c, 0, t),
+					   (b - t - lines) * cols * 2);
+			sisusbcon_memsetw(sisusb_vaddr(sisusb, c, 0, t), eattr,
+					  lines * cols * 2);
+			break;
+	}
+
+	sisusb_copy_memory(sisusb, sisusb_vaddr(sisusb, c, 0, t),
+			sisusb_haddr(sisusb, c, 0, t), length);
+
+	mutex_unlock(&sisusb->lock);
+
+	return true;
+}
+
+/* Interface routine */
+static bool
+sisusbcon_scroll(struct vc_data *c, unsigned int t, unsigned int b,
+		enum con_scroll dir, unsigned int lines)
+{
+	struct sisusb_usb_data *sisusb;
+	u16 eattr = c->vc_video_erase_char;
+	int copyall = 0;
+	unsigned long oldorigin;
+	unsigned int delta = lines * c->vc_size_row;
+
+	/* Returning != 0 means we have done the scrolling successfully.
+	 * Returning 0 makes vt do the scrolling on its own.
+	 * Note that con_scroll is only called if the console is
+	 * visible. In that case, the origin should be our buffer,
+	 * not the vt's private one.
+	 */
+
+	if (!lines)
+		return true;
+
+	sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
+	if (!sisusb)
+		return false;
+
+	/* sisusb->lock is down */
+
+	if (sisusb_is_inactive(c, sisusb)) {
+		mutex_unlock(&sisusb->lock);
+		return false;
+	}
+
+	/* Special case */
+	if (t || b != c->vc_rows)
+		return sisusbcon_scroll_area(c, sisusb, t, b, dir, lines);
+
+	if (c->vc_origin != c->vc_visible_origin) {
+		c->vc_visible_origin = c->vc_origin;
+		sisusbcon_set_start_address(sisusb, c);
+	}
+
+	/* limit amount to maximum realistic size */
+	if (lines > c->vc_rows)
+		lines = c->vc_rows;
+
+	oldorigin = c->vc_origin;
+
+	switch (dir) {
+
+	case SM_UP:
+
+		if (c->vc_scr_end + delta >=
+				sisusb->scrbuf + sisusb->scrbuf_size) {
+			memcpy((u16 *)sisusb->scrbuf,
+					  (u16 *)(oldorigin + delta),
+					  c->vc_screenbuf_size - delta);
+			c->vc_origin = sisusb->scrbuf;
+			sisusb->con_rolled_over = oldorigin - sisusb->scrbuf;
+			copyall = 1;
+		} else
+			c->vc_origin += delta;
+
+		sisusbcon_memsetw(
+			(u16 *)(c->vc_origin + c->vc_screenbuf_size - delta),
+					eattr, delta);
+
+		break;
+
+	case SM_DOWN:
+
+		if (oldorigin - delta < sisusb->scrbuf) {
+			memmove((void *)sisusb->scrbuf + sisusb->scrbuf_size -
+					c->vc_screenbuf_size + delta,
+					(u16 *)oldorigin,
+					c->vc_screenbuf_size - delta);
+			c->vc_origin = sisusb->scrbuf +
+					sisusb->scrbuf_size -
+					c->vc_screenbuf_size;
+			sisusb->con_rolled_over = 0;
+			copyall = 1;
+		} else
+			c->vc_origin -= delta;
+
+		c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size;
+
+		scr_memsetw((u16 *)(c->vc_origin), eattr, delta);
+
+		break;
+	}
+
+	if (copyall)
+		sisusb_copy_memory(sisusb,
+			(u8 *)c->vc_origin,
+			sisusb_haddr(sisusb, c, 0, 0),
+			c->vc_screenbuf_size);
+	else if (dir == SM_UP)
+		sisusb_copy_memory(sisusb,
+			(u8 *)c->vc_origin + c->vc_screenbuf_size - delta,
+			sisusb_haddr(sisusb, c, 0, 0) +
+					c->vc_screenbuf_size - delta,
+			delta);
+	else
+		sisusb_copy_memory(sisusb,
+			(u8 *)c->vc_origin,
+			sisusb_haddr(sisusb, c, 0, 0),
+			delta);
+
+	c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size;
+	c->vc_visible_origin = c->vc_origin;
+
+	sisusbcon_set_start_address(sisusb, c);
+
+	c->vc_pos = c->vc_pos - oldorigin + c->vc_origin;
+
+	mutex_unlock(&sisusb->lock);
+
+	return true;
+}
+
+/* Interface routine */
+static int
+sisusbcon_set_origin(struct vc_data *c)
+{
+	struct sisusb_usb_data *sisusb;
+
+	/* Returning != 0 means we were successful.
+	 * Returning 0 will vt make to use its own
+	 *	screenbuffer as the origin.
+	 */
+
+	sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
+	if (!sisusb)
+		return 0;
+
+	/* sisusb->lock is down */
+
+	if (sisusb_is_inactive(c, sisusb) || sisusb->con_blanked) {
+		mutex_unlock(&sisusb->lock);
+		return 0;
+	}
+
+	c->vc_origin = c->vc_visible_origin = sisusb->scrbuf;
+
+	sisusbcon_set_start_address(sisusb, c);
+
+	sisusb->con_rolled_over = 0;
+
+	mutex_unlock(&sisusb->lock);
+
+	return true;
+}
+
+/* Interface routine */
+static int
+sisusbcon_resize(struct vc_data *c, unsigned int newcols, unsigned int newrows,
+		 unsigned int user)
+{
+	struct sisusb_usb_data *sisusb;
+	int fh;
+
+	sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
+	if (!sisusb)
+		return -ENODEV;
+
+	fh = sisusb->current_font_height;
+
+	mutex_unlock(&sisusb->lock);
+
+	/* We are quite unflexible as regards resizing. The vt code
+	 * handles sizes where the line length isn't equal the pitch
+	 * quite badly. As regards the rows, our panning tricks only
+	 * work well if the number of rows equals the visible number
+	 * of rows.
+	 */
+
+	if (newcols != 80 || c->vc_scan_lines / fh != newrows)
+		return -EINVAL;
+
+	return 0;
+}
+
+int
+sisusbcon_do_font_op(struct sisusb_usb_data *sisusb, int set, int slot,
+			u8 *arg, int cmapsz, int ch512, int dorecalc,
+			struct vc_data *c, int fh, int uplock)
+{
+	int font_select = 0x00, i, err = 0;
+	u32 offset = 0;
+	u8 dummy;
+
+	/* sisusb->lock is down */
+
+	/*
+	 * The default font is kept in slot 0.
+	 * A user font is loaded in slot 2 (256 ch)
+	 * or 2+3 (512 ch).
+	 */
+
+	if ((slot != 0 && slot != 2) || !fh) {
+		if (uplock)
+			mutex_unlock(&sisusb->lock);
+		return -EINVAL;
+	}
+
+	if (set)
+		sisusb->font_slot = slot;
+
+	/* Default font is always 256 */
+	if (slot == 0)
+		ch512 = 0;
+	else
+		offset = 4 * cmapsz;
+
+	font_select = (slot == 0) ? 0x00 : (ch512 ? 0x0e : 0x0a);
+
+	err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x01); /* Reset */
+	err |= sisusb_setidxreg(sisusb, SISSR, 0x02, 0x04); /* Write to plane 2 */
+	err |= sisusb_setidxreg(sisusb, SISSR, 0x04, 0x07); /* Memory mode a0-bf */
+	err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x03); /* Reset */
+
+	if (err)
+		goto font_op_error;
+
+	err |= sisusb_setidxreg(sisusb, SISGR, 0x04, 0x03); /* Select plane read 2 */
+	err |= sisusb_setidxreg(sisusb, SISGR, 0x05, 0x00); /* Disable odd/even */
+	err |= sisusb_setidxreg(sisusb, SISGR, 0x06, 0x00); /* Address range a0-bf */
+
+	if (err)
+		goto font_op_error;
+
+	if (arg) {
+		if (set)
+			for (i = 0; i < cmapsz; i++) {
+				err |= sisusb_writeb(sisusb,
+					sisusb->vrambase + offset + i,
+					arg[i]);
+				if (err)
+					break;
+			}
+		else
+			for (i = 0; i < cmapsz; i++) {
+				err |= sisusb_readb(sisusb,
+					sisusb->vrambase + offset + i,
+					&arg[i]);
+				if (err)
+					break;
+			}
+
+		/*
+		 * In 512-character mode, the character map is not contiguous if
+		 * we want to remain EGA compatible -- which we do
+		 */
+
+		if (ch512) {
+			if (set)
+				for (i = 0; i < cmapsz; i++) {
+					err |= sisusb_writeb(sisusb,
+						sisusb->vrambase + offset +
+							(2 * cmapsz) + i,
+						arg[cmapsz + i]);
+					if (err)
+						break;
+				}
+			else
+				for (i = 0; i < cmapsz; i++) {
+					err |= sisusb_readb(sisusb,
+						sisusb->vrambase + offset +
+							(2 * cmapsz) + i,
+						&arg[cmapsz + i]);
+					if (err)
+						break;
+				}
+		}
+	}
+
+	if (err)
+		goto font_op_error;
+
+	err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x01); /* Reset */
+	err |= sisusb_setidxreg(sisusb, SISSR, 0x02, 0x03); /* Write to planes 0+1 */
+	err |= sisusb_setidxreg(sisusb, SISSR, 0x04, 0x03); /* Memory mode a0-bf */
+	if (set)
+		sisusb_setidxreg(sisusb, SISSR, 0x03, font_select);
+	err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x03); /* Reset end */
+
+	if (err)
+		goto font_op_error;
+
+	err |= sisusb_setidxreg(sisusb, SISGR, 0x04, 0x00); /* Select plane read 0 */
+	err |= sisusb_setidxreg(sisusb, SISGR, 0x05, 0x10); /* Enable odd/even */
+	err |= sisusb_setidxreg(sisusb, SISGR, 0x06, 0x06); /* Address range b8-bf */
+
+	if (err)
+		goto font_op_error;
+
+	if ((set) && (ch512 != sisusb->current_font_512)) {
+
+		/* Font is shared among all our consoles.
+		 * And so is the hi_font_mask.
+		 */
+		for (i = 0; i < MAX_NR_CONSOLES; i++) {
+			struct vc_data *d = vc_cons[i].d;
+			if (d && d->vc_sw == &sisusb_con)
+				d->vc_hi_font_mask = ch512 ? 0x0800 : 0;
+		}
+
+		sisusb->current_font_512 = ch512;
+
+		/* color plane enable register:
+			256-char: enable intensity bit
+			512-char: disable intensity bit */
+		sisusb_getreg(sisusb, SISINPSTAT, &dummy);
+		sisusb_setreg(sisusb, SISAR, 0x12);
+		sisusb_setreg(sisusb, SISAR, ch512 ? 0x07 : 0x0f);
+
+		sisusb_getreg(sisusb, SISINPSTAT, &dummy);
+		sisusb_setreg(sisusb, SISAR, 0x20);
+		sisusb_getreg(sisusb, SISINPSTAT, &dummy);
+	}
+
+	if (dorecalc) {
+
+		/*
+		 * Adjust the screen to fit a font of a certain height
+		 */
+
+		unsigned char ovr, vde, fsr;
+		int rows = 0, maxscan = 0;
+
+		if (c) {
+
+			/* Number of video rows */
+			rows = c->vc_scan_lines / fh;
+			/* Scan lines to actually display-1 */
+			maxscan = rows * fh - 1;
+
+			/*printk(KERN_DEBUG "sisusb recalc rows %d maxscan %d fh %d sl %d\n",
+				rows, maxscan, fh, c->vc_scan_lines);*/
+
+			sisusb_getidxreg(sisusb, SISCR, 0x07, &ovr);
+			vde = maxscan & 0xff;
+			ovr = (ovr & 0xbd) |
+			      ((maxscan & 0x100) >> 7) |
+			      ((maxscan & 0x200) >> 3);
+			sisusb_setidxreg(sisusb, SISCR, 0x07, ovr);
+			sisusb_setidxreg(sisusb, SISCR, 0x12, vde);
+
+		}
+
+		sisusb_getidxreg(sisusb, SISCR, 0x09, &fsr);
+		fsr = (fsr & 0xe0) | (fh - 1);
+		sisusb_setidxreg(sisusb, SISCR, 0x09, fsr);
+		sisusb->current_font_height = fh;
+
+		sisusb->sisusb_cursor_size_from = -1;
+		sisusb->sisusb_cursor_size_to   = -1;
+
+	}
+
+	if (uplock)
+		mutex_unlock(&sisusb->lock);
+
+	if (dorecalc && c) {
+		int rows = c->vc_scan_lines / fh;
+
+		/* Now adjust our consoles' size */
+
+		for (i = 0; i < MAX_NR_CONSOLES; i++) {
+			struct vc_data *vc = vc_cons[i].d;
+
+			if (vc && vc->vc_sw == &sisusb_con) {
+				if (con_is_visible(vc)) {
+					vc->vc_sw->con_cursor(vc, CM_DRAW);
+				}
+				vc->vc_font.height = fh;
+				vc_resize(vc, 0, rows);
+			}
+		}
+	}
+
+	return 0;
+
+font_op_error:
+	if (uplock)
+		mutex_unlock(&sisusb->lock);
+
+	return -EIO;
+}
+
+/* Interface routine */
+static int
+sisusbcon_font_set(struct vc_data *c, struct console_font *font,
+		   unsigned int flags)
+{
+	struct sisusb_usb_data *sisusb;
+	unsigned charcount = font->charcount;
+
+	if (font->width != 8 || (charcount != 256 && charcount != 512))
+		return -EINVAL;
+
+	sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
+	if (!sisusb)
+		return -ENODEV;
+
+	/* sisusb->lock is down */
+
+	/* Save the user-provided font into a buffer. This
+	 * is used for restoring text mode after quitting
+	 * from X and for the con_getfont routine.
+	 */
+	if (sisusb->font_backup) {
+		if (sisusb->font_backup_size < charcount) {
+			vfree(sisusb->font_backup);
+			sisusb->font_backup = NULL;
+		}
+	}
+
+	if (!sisusb->font_backup)
+		sisusb->font_backup = vmalloc(array_size(charcount, 32));
+
+	if (sisusb->font_backup) {
+		memcpy(sisusb->font_backup, font->data, array_size(charcount, 32));
+		sisusb->font_backup_size = charcount;
+		sisusb->font_backup_height = font->height;
+		sisusb->font_backup_512 = (charcount == 512) ? 1 : 0;
+	}
+
+	/* do_font_op ups sisusb->lock */
+
+	return sisusbcon_do_font_op(sisusb, 1, 2, font->data,
+			8192, (charcount == 512),
+			(!(flags & KD_FONT_FLAG_DONT_RECALC)) ? 1 : 0,
+			c, font->height, 1);
+}
+
+/* Interface routine */
+static int
+sisusbcon_font_get(struct vc_data *c, struct console_font *font)
+{
+	struct sisusb_usb_data *sisusb;
+
+	sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
+	if (!sisusb)
+		return -ENODEV;
+
+	/* sisusb->lock is down */
+
+	font->width = 8;
+	font->height = c->vc_font.height;
+	font->charcount = 256;
+
+	if (!font->data) {
+		mutex_unlock(&sisusb->lock);
+		return 0;
+	}
+
+	if (!sisusb->font_backup) {
+		mutex_unlock(&sisusb->lock);
+		return -ENODEV;
+	}
+
+	/* Copy 256 chars only, like vgacon */
+	memcpy(font->data, sisusb->font_backup, 256 * 32);
+
+	mutex_unlock(&sisusb->lock);
+
+	return 0;
+}
+
+/*
+ *  The console `switch' structure for the sisusb console
+ */
+
+static const struct consw sisusb_con = {
+	.owner =		THIS_MODULE,
+	.con_startup =		sisusbcon_startup,
+	.con_init =		sisusbcon_init,
+	.con_deinit =		sisusbcon_deinit,
+	.con_clear =		sisusbcon_clear,
+	.con_putc =		sisusbcon_putc,
+	.con_putcs =		sisusbcon_putcs,
+	.con_cursor =		sisusbcon_cursor,
+	.con_scroll =		sisusbcon_scroll,
+	.con_switch =		sisusbcon_switch,
+	.con_blank =		sisusbcon_blank,
+	.con_font_set =		sisusbcon_font_set,
+	.con_font_get =		sisusbcon_font_get,
+	.con_set_palette =	sisusbcon_set_palette,
+	.con_scrolldelta =	sisusbcon_scrolldelta,
+	.con_build_attr =	sisusbcon_build_attr,
+	.con_invert_region =	sisusbcon_invert_region,
+	.con_set_origin =	sisusbcon_set_origin,
+	.con_save_screen =	sisusbcon_save_screen,
+	.con_resize =		sisusbcon_resize,
+};
+
+/* Our very own dummy console driver */
+
+static const char *sisusbdummycon_startup(void)
+{
+    return "SISUSBVGADUMMY";
+}
+
+static void sisusbdummycon_init(struct vc_data *vc, int init)
+{
+    vc->vc_can_do_color = 1;
+    if (init) {
+	vc->vc_cols = 80;
+	vc->vc_rows = 25;
+    } else
+	vc_resize(vc, 80, 25);
+}
+
+static void sisusbdummycon_deinit(struct vc_data *vc) { }
+static void sisusbdummycon_clear(struct vc_data *vc, int sy, int sx,
+				 int height, int width) { }
+static void sisusbdummycon_putc(struct vc_data *vc, int c, int ypos,
+				int xpos) { }
+static void sisusbdummycon_putcs(struct vc_data *vc, const unsigned short *s,
+				 int count, int ypos, int xpos) { }
+static void sisusbdummycon_cursor(struct vc_data *vc, int mode) { }
+
+static bool sisusbdummycon_scroll(struct vc_data *vc, unsigned int top,
+				  unsigned int bottom, enum con_scroll dir,
+				  unsigned int lines)
+{
+	return false;
+}
+
+static int sisusbdummycon_switch(struct vc_data *vc)
+{
+	return 0;
+}
+
+static int sisusbdummycon_blank(struct vc_data *vc, int blank, int mode_switch)
+{
+	return 0;
+}
+
+static const struct consw sisusb_dummy_con = {
+	.owner =		THIS_MODULE,
+	.con_startup =		sisusbdummycon_startup,
+	.con_init =		sisusbdummycon_init,
+	.con_deinit =		sisusbdummycon_deinit,
+	.con_clear =		sisusbdummycon_clear,
+	.con_putc =		sisusbdummycon_putc,
+	.con_putcs =		sisusbdummycon_putcs,
+	.con_cursor =		sisusbdummycon_cursor,
+	.con_scroll =		sisusbdummycon_scroll,
+	.con_switch =		sisusbdummycon_switch,
+	.con_blank =		sisusbdummycon_blank,
+};
+
+int
+sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last)
+{
+	int i, ret;
+
+	mutex_lock(&sisusb->lock);
+
+	/* Erm.. that should not happen */
+	if (sisusb->haveconsole || !sisusb->SiS_Pr) {
+		mutex_unlock(&sisusb->lock);
+		return 1;
+	}
+
+	sisusb->con_first = first;
+	sisusb->con_last  = last;
+
+	if (first > last ||
+	    first > MAX_NR_CONSOLES ||
+	    last > MAX_NR_CONSOLES) {
+		mutex_unlock(&sisusb->lock);
+		return 1;
+	}
+
+	/* If gfxcore not initialized or no consoles given, quit graciously */
+	if (!sisusb->gfxinit || first < 1 || last < 1) {
+		mutex_unlock(&sisusb->lock);
+		return 0;
+	}
+
+	sisusb->sisusb_cursor_loc       = -1;
+	sisusb->sisusb_cursor_size_from = -1;
+	sisusb->sisusb_cursor_size_to   = -1;
+
+	/* Set up text mode (and upload  default font) */
+	if (sisusb_reset_text_mode(sisusb, 1)) {
+		mutex_unlock(&sisusb->lock);
+		dev_err(&sisusb->sisusb_dev->dev, "Failed to set up text mode\n");
+		return 1;
+	}
+
+	/* Initialize some gfx registers */
+	sisusb_initialize(sisusb);
+
+	for (i = first - 1; i <= last - 1; i++) {
+		/* Save sisusb for our interface routines */
+		mysisusbs[i] = sisusb;
+	}
+
+	/* Initial console setup */
+	sisusb->sisusb_num_columns = 80;
+
+	/* Use a 32K buffer (matches b8000-bffff area) */
+	sisusb->scrbuf_size = 32 * 1024;
+
+	/* Allocate screen buffer */
+	if (!(sisusb->scrbuf = (unsigned long)vmalloc(sisusb->scrbuf_size))) {
+		mutex_unlock(&sisusb->lock);
+		dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate screen buffer\n");
+		return 1;
+	}
+
+	mutex_unlock(&sisusb->lock);
+
+	/* Now grab the desired console(s) */
+	console_lock();
+	ret = do_take_over_console(&sisusb_con, first - 1, last - 1, 0);
+	console_unlock();
+	if (!ret)
+		sisusb->haveconsole = 1;
+	else {
+		for (i = first - 1; i <= last - 1; i++)
+			mysisusbs[i] = NULL;
+	}
+
+	return ret;
+}
+
+void
+sisusb_console_exit(struct sisusb_usb_data *sisusb)
+{
+	int i;
+
+	/* This is called if the device is disconnected
+	 * and while disconnect and lock semaphores
+	 * are up. This should be save because we
+	 * can't lose our sisusb any other way but by
+	 * disconnection (and hence, the disconnect
+	 * sema is for protecting all other access
+	 * functions from disconnection, not the
+	 * other way round).
+	 */
+
+	/* Now what do we do in case of disconnection:
+	 * One alternative would be to simply call
+	 * give_up_console(). Nah, not a good idea.
+	 * give_up_console() is obviously buggy as it
+	 * only discards the consw pointer from the
+	 * driver_map, but doesn't adapt vc->vc_sw
+	 * of the affected consoles. Hence, the next
+	 * call to any of the console functions will
+	 * eventually take a trip to oops county.
+	 * Also, give_up_console for some reason
+	 * doesn't decrement our module refcount.
+	 * Instead, we switch our consoles to a private
+	 * dummy console. This, of course, keeps our
+	 * refcount up as well, but it works perfectly.
+	 */
+
+	if (sisusb->haveconsole) {
+		for (i = 0; i < MAX_NR_CONSOLES; i++)
+			if (sisusb->havethisconsole[i]) {
+				console_lock();
+				do_take_over_console(&sisusb_dummy_con, i, i, 0);
+				console_unlock();
+				/* At this point, con_deinit for all our
+				 * consoles is executed by do_take_over_console().
+				 */
+			}
+		sisusb->haveconsole = 0;
+	}
+
+	vfree((void *)sisusb->scrbuf);
+	sisusb->scrbuf = 0;
+
+	vfree(sisusb->font_backup);
+	sisusb->font_backup = NULL;
+}
+
+void __init sisusb_init_concode(void)
+{
+	int i;
+
+	for (i = 0; i < MAX_NR_CONSOLES; i++)
+		mysisusbs[i] = NULL;
+}
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.c b/drivers/usb/misc/sisusbvga/sisusb_init.c
new file mode 100644
index 000000000..7c11198d5
--- /dev/null
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.c
@@ -0,0 +1,955 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles
+ *
+ * Display mode initializing code
+ *
+ * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria
+ *
+ * If distributed as part of the Linux kernel, this code is licensed under the
+ * terms of the GPL v2.
+ *
+ * Otherwise, the following license terms apply:
+ *
+ * * Redistribution and use in source and binary forms, with or without
+ * * modification, are permitted provided that the following conditions
+ * * are met:
+ * * 1) Redistributions of source code must retain the above copyright
+ * *    notice, this list of conditions and the following disclaimer.
+ * * 2) Redistributions in binary form must reproduce the above copyright
+ * *    notice, this list of conditions and the following disclaimer in the
+ * *    documentation and/or other materials provided with the distribution.
+ * * 3) The name of the author may not be used to endorse or promote products
+ * *    derived from this software without specific prior written permission.
+ * *
+ * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Author:	Thomas Winischhofer <thomas@winischhofer.net>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/poll.h>
+#include <linux/spinlock.h>
+
+#include "sisusb.h"
+#include "sisusb_init.h"
+#include "sisusb_tables.h"
+
+/*********************************************/
+/*         POINTER INITIALIZATION            */
+/*********************************************/
+
+static void SiSUSB_InitPtr(struct SiS_Private *SiS_Pr)
+{
+	SiS_Pr->SiS_ModeResInfo = SiSUSB_ModeResInfo;
+	SiS_Pr->SiS_StandTable = SiSUSB_StandTable;
+
+	SiS_Pr->SiS_SModeIDTable = SiSUSB_SModeIDTable;
+	SiS_Pr->SiS_EModeIDTable = SiSUSB_EModeIDTable;
+	SiS_Pr->SiS_RefIndex = SiSUSB_RefIndex;
+	SiS_Pr->SiS_CRT1Table = SiSUSB_CRT1Table;
+
+	SiS_Pr->SiS_VCLKData = SiSUSB_VCLKData;
+}
+
+/*********************************************/
+/*          HELPER: SetReg, GetReg           */
+/*********************************************/
+
+static void
+SiS_SetReg(struct SiS_Private *SiS_Pr, unsigned long port,
+	   unsigned short index, unsigned short data)
+{
+	sisusb_setidxreg(SiS_Pr->sisusb, port, index, data);
+}
+
+static void
+SiS_SetRegByte(struct SiS_Private *SiS_Pr, unsigned long port,
+	       unsigned short data)
+{
+	sisusb_setreg(SiS_Pr->sisusb, port, data);
+}
+
+static unsigned char
+SiS_GetReg(struct SiS_Private *SiS_Pr, unsigned long port, unsigned short index)
+{
+	u8 data;
+
+	sisusb_getidxreg(SiS_Pr->sisusb, port, index, &data);
+
+	return data;
+}
+
+static unsigned char
+SiS_GetRegByte(struct SiS_Private *SiS_Pr, unsigned long port)
+{
+	u8 data;
+
+	sisusb_getreg(SiS_Pr->sisusb, port, &data);
+
+	return data;
+}
+
+static void
+SiS_SetRegANDOR(struct SiS_Private *SiS_Pr, unsigned long port,
+		unsigned short index, unsigned short DataAND,
+		unsigned short DataOR)
+{
+	sisusb_setidxregandor(SiS_Pr->sisusb, port, index, DataAND, DataOR);
+}
+
+static void
+SiS_SetRegAND(struct SiS_Private *SiS_Pr, unsigned long port,
+	      unsigned short index, unsigned short DataAND)
+{
+	sisusb_setidxregand(SiS_Pr->sisusb, port, index, DataAND);
+}
+
+static void
+SiS_SetRegOR(struct SiS_Private *SiS_Pr, unsigned long port,
+	     unsigned short index, unsigned short DataOR)
+{
+	sisusb_setidxregor(SiS_Pr->sisusb, port, index, DataOR);
+}
+
+/*********************************************/
+/*      HELPER: DisplayOn, DisplayOff        */
+/*********************************************/
+
+static void SiS_DisplayOn(struct SiS_Private *SiS_Pr)
+{
+	SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x01, 0xDF);
+}
+
+/*********************************************/
+/*        HELPER: Init Port Addresses        */
+/*********************************************/
+
+static void SiSUSBRegInit(struct SiS_Private *SiS_Pr, unsigned long BaseAddr)
+{
+	SiS_Pr->SiS_P3c4 = BaseAddr + 0x14;
+	SiS_Pr->SiS_P3d4 = BaseAddr + 0x24;
+	SiS_Pr->SiS_P3c0 = BaseAddr + 0x10;
+	SiS_Pr->SiS_P3ce = BaseAddr + 0x1e;
+	SiS_Pr->SiS_P3c2 = BaseAddr + 0x12;
+	SiS_Pr->SiS_P3ca = BaseAddr + 0x1a;
+	SiS_Pr->SiS_P3c6 = BaseAddr + 0x16;
+	SiS_Pr->SiS_P3c7 = BaseAddr + 0x17;
+	SiS_Pr->SiS_P3c8 = BaseAddr + 0x18;
+	SiS_Pr->SiS_P3c9 = BaseAddr + 0x19;
+	SiS_Pr->SiS_P3cb = BaseAddr + 0x1b;
+	SiS_Pr->SiS_P3cc = BaseAddr + 0x1c;
+	SiS_Pr->SiS_P3cd = BaseAddr + 0x1d;
+	SiS_Pr->SiS_P3da = BaseAddr + 0x2a;
+	SiS_Pr->SiS_Part1Port = BaseAddr + SIS_CRT2_PORT_04;
+}
+
+/*********************************************/
+/*             HELPER: GetSysFlags           */
+/*********************************************/
+
+static void SiS_GetSysFlags(struct SiS_Private *SiS_Pr)
+{
+	SiS_Pr->SiS_MyCR63 = 0x63;
+}
+
+/*********************************************/
+/*         HELPER: Init PCI & Engines        */
+/*********************************************/
+
+static void SiSInitPCIetc(struct SiS_Private *SiS_Pr)
+{
+	SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x20, 0xa1);
+	/*  - Enable 2D (0x40)
+	 *  - Enable 3D (0x02)
+	 *  - Enable 3D vertex command fetch (0x10)
+	 *  - Enable 3D command parser (0x08)
+	 *  - Enable 3D G/L transformation engine (0x80)
+	 */
+	SiS_SetRegOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x1E, 0xDA);
+}
+
+/*********************************************/
+/*        HELPER: SET SEGMENT REGISTERS      */
+/*********************************************/
+
+static void SiS_SetSegRegLower(struct SiS_Private *SiS_Pr, unsigned short value)
+{
+	unsigned short temp;
+
+	value &= 0x00ff;
+	temp = SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3cb) & 0xf0;
+	temp |= (value >> 4);
+	SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3cb, temp);
+	temp = SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3cd) & 0xf0;
+	temp |= (value & 0x0f);
+	SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3cd, temp);
+}
+
+static void SiS_SetSegRegUpper(struct SiS_Private *SiS_Pr, unsigned short value)
+{
+	unsigned short temp;
+
+	value &= 0x00ff;
+	temp = SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3cb) & 0x0f;
+	temp |= (value & 0xf0);
+	SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3cb, temp);
+	temp = SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3cd) & 0x0f;
+	temp |= (value << 4);
+	SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3cd, temp);
+}
+
+static void SiS_SetSegmentReg(struct SiS_Private *SiS_Pr, unsigned short value)
+{
+	SiS_SetSegRegLower(SiS_Pr, value);
+	SiS_SetSegRegUpper(SiS_Pr, value);
+}
+
+static void SiS_ResetSegmentReg(struct SiS_Private *SiS_Pr)
+{
+	SiS_SetSegmentReg(SiS_Pr, 0);
+}
+
+static void
+SiS_SetSegmentRegOver(struct SiS_Private *SiS_Pr, unsigned short value)
+{
+	unsigned short temp = value >> 8;
+
+	temp &= 0x07;
+	temp |= (temp << 4);
+	SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x1d, temp);
+	SiS_SetSegmentReg(SiS_Pr, value);
+}
+
+static void SiS_ResetSegmentRegOver(struct SiS_Private *SiS_Pr)
+{
+	SiS_SetSegmentRegOver(SiS_Pr, 0);
+}
+
+static void SiS_ResetSegmentRegisters(struct SiS_Private *SiS_Pr)
+{
+	SiS_ResetSegmentReg(SiS_Pr);
+	SiS_ResetSegmentRegOver(SiS_Pr);
+}
+
+/*********************************************/
+/*           HELPER: SearchModeID            */
+/*********************************************/
+
+static int
+SiS_SearchModeID(struct SiS_Private *SiS_Pr, unsigned short *ModeNo,
+		 unsigned short *ModeIdIndex)
+{
+	if ((*ModeNo) <= 0x13) {
+
+		if ((*ModeNo) != 0x03)
+			return 0;
+
+		(*ModeIdIndex) = 0;
+
+	} else {
+
+		for (*ModeIdIndex = 0;; (*ModeIdIndex)++) {
+
+			if (SiS_Pr->SiS_EModeIDTable[*ModeIdIndex].Ext_ModeID ==
+			    (*ModeNo))
+				break;
+
+			if (SiS_Pr->SiS_EModeIDTable[*ModeIdIndex].Ext_ModeID ==
+			    0xFF)
+				return 0;
+		}
+
+	}
+
+	return 1;
+}
+
+/*********************************************/
+/*            HELPER: ENABLE CRT1            */
+/*********************************************/
+
+static void SiS_HandleCRT1(struct SiS_Private *SiS_Pr)
+{
+	/* Enable CRT1 gating */
+	SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4, SiS_Pr->SiS_MyCR63, 0xbf);
+}
+
+/*********************************************/
+/*           HELPER: GetColorDepth           */
+/*********************************************/
+
+static unsigned short
+SiS_GetColorDepth(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+		  unsigned short ModeIdIndex)
+{
+	static const unsigned short ColorDepth[6] = { 1, 2, 4, 4, 6, 8 };
+	unsigned short modeflag;
+	short index;
+
+	if (ModeNo <= 0x13) {
+		modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag;
+	} else {
+		modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	}
+
+	index = (modeflag & ModeTypeMask) - ModeEGA;
+	if (index < 0)
+		index = 0;
+	return ColorDepth[index];
+}
+
+/*********************************************/
+/*             HELPER: GetOffset             */
+/*********************************************/
+
+static unsigned short
+SiS_GetOffset(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+	      unsigned short ModeIdIndex, unsigned short rrti)
+{
+	unsigned short xres, temp, colordepth, infoflag;
+
+	infoflag = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag;
+	xres = SiS_Pr->SiS_RefIndex[rrti].XRes;
+
+	colordepth = SiS_GetColorDepth(SiS_Pr, ModeNo, ModeIdIndex);
+
+	temp = xres / 16;
+
+	if (infoflag & InterlaceMode)
+		temp <<= 1;
+
+	temp *= colordepth;
+
+	if (xres % 16)
+		temp += (colordepth >> 1);
+
+	return temp;
+}
+
+/*********************************************/
+/*                   SEQ                     */
+/*********************************************/
+
+static void
+SiS_SetSeqRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
+{
+	unsigned char SRdata;
+	int i;
+
+	SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x00, 0x03);
+
+	SRdata = SiS_Pr->SiS_StandTable[StandTableIndex].SR[0] | 0x20;
+	SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x01, SRdata);
+
+	for (i = 2; i <= 4; i++) {
+		SRdata = SiS_Pr->SiS_StandTable[StandTableIndex].SR[i - 1];
+		SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, i, SRdata);
+	}
+}
+
+/*********************************************/
+/*                  MISC                     */
+/*********************************************/
+
+static void
+SiS_SetMiscRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
+{
+	unsigned char Miscdata = SiS_Pr->SiS_StandTable[StandTableIndex].MISC;
+
+	SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c2, Miscdata);
+}
+
+/*********************************************/
+/*                  CRTC                     */
+/*********************************************/
+
+static void
+SiS_SetCRTCRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
+{
+	unsigned char CRTCdata;
+	unsigned short i;
+
+	SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4, 0x11, 0x7f);
+
+	for (i = 0; i <= 0x18; i++) {
+		CRTCdata = SiS_Pr->SiS_StandTable[StandTableIndex].CRTC[i];
+		SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, i, CRTCdata);
+	}
+}
+
+/*********************************************/
+/*                   ATT                     */
+/*********************************************/
+
+static void
+SiS_SetATTRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
+{
+	unsigned char ARdata;
+	unsigned short i;
+
+	for (i = 0; i <= 0x13; i++) {
+		ARdata = SiS_Pr->SiS_StandTable[StandTableIndex].ATTR[i];
+		SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3da);
+		SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, i);
+		SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, ARdata);
+	}
+	SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3da);
+	SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, 0x14);
+	SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, 0x00);
+
+	SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3da);
+	SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, 0x20);
+	SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3da);
+}
+
+/*********************************************/
+/*                   GRC                     */
+/*********************************************/
+
+static void
+SiS_SetGRCRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
+{
+	unsigned char GRdata;
+	unsigned short i;
+
+	for (i = 0; i <= 0x08; i++) {
+		GRdata = SiS_Pr->SiS_StandTable[StandTableIndex].GRC[i];
+		SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3ce, i, GRdata);
+	}
+
+	if (SiS_Pr->SiS_ModeType > ModeVGA) {
+		/* 256 color disable */
+		SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3ce, 0x05, 0xBF);
+	}
+}
+
+/*********************************************/
+/*          CLEAR EXTENDED REGISTERS         */
+/*********************************************/
+
+static void SiS_ClearExt1Regs(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
+{
+	int i;
+
+	for (i = 0x0A; i <= 0x0E; i++) {
+		SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, i, 0x00);
+	}
+
+	SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x37, 0xFE);
+}
+
+/*********************************************/
+/*              Get rate index               */
+/*********************************************/
+
+static unsigned short
+SiS_GetRatePtr(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+	       unsigned short ModeIdIndex)
+{
+	unsigned short rrti, i, index, temp;
+
+	if (ModeNo <= 0x13)
+		return 0xFFFF;
+
+	index = SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x33) & 0x0F;
+	if (index > 0)
+		index--;
+
+	rrti = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].REFindex;
+	ModeNo = SiS_Pr->SiS_RefIndex[rrti].ModeID;
+
+	i = 0;
+	do {
+		if (SiS_Pr->SiS_RefIndex[rrti + i].ModeID != ModeNo)
+			break;
+
+		temp =
+		    SiS_Pr->SiS_RefIndex[rrti + i].Ext_InfoFlag & ModeTypeMask;
+		if (temp < SiS_Pr->SiS_ModeType)
+			break;
+
+		i++;
+		index--;
+	} while (index != 0xFFFF);
+
+	i--;
+
+	return (rrti + i);
+}
+
+/*********************************************/
+/*                  SYNC                     */
+/*********************************************/
+
+static void SiS_SetCRT1Sync(struct SiS_Private *SiS_Pr, unsigned short rrti)
+{
+	unsigned short sync = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag >> 8;
+	sync &= 0xC0;
+	sync |= 0x2f;
+	SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c2, sync);
+}
+
+/*********************************************/
+/*                  CRTC/2                   */
+/*********************************************/
+
+static void
+SiS_SetCRT1CRTC(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+		unsigned short ModeIdIndex, unsigned short rrti)
+{
+	unsigned char index;
+	unsigned short temp, i, j, modeflag;
+
+	SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4, 0x11, 0x7f);
+
+	modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+
+	index = SiS_Pr->SiS_RefIndex[rrti].Ext_CRT1CRTC;
+
+	for (i = 0, j = 0; i <= 7; i++, j++) {
+		SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, j,
+			   SiS_Pr->SiS_CRT1Table[index].CR[i]);
+	}
+	for (j = 0x10; i <= 10; i++, j++) {
+		SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, j,
+			   SiS_Pr->SiS_CRT1Table[index].CR[i]);
+	}
+	for (j = 0x15; i <= 12; i++, j++) {
+		SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, j,
+			   SiS_Pr->SiS_CRT1Table[index].CR[i]);
+	}
+	for (j = 0x0A; i <= 15; i++, j++) {
+		SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, j,
+			   SiS_Pr->SiS_CRT1Table[index].CR[i]);
+	}
+
+	temp = SiS_Pr->SiS_CRT1Table[index].CR[16] & 0xE0;
+	SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0E, temp);
+
+	temp = ((SiS_Pr->SiS_CRT1Table[index].CR[16]) & 0x01) << 5;
+	if (modeflag & DoubleScanMode)
+		temp |= 0x80;
+	SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3d4, 0x09, 0x5F, temp);
+
+	if (SiS_Pr->SiS_ModeType > ModeVGA)
+		SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x14, 0x4F);
+}
+
+/*********************************************/
+/*               OFFSET & PITCH              */
+/*********************************************/
+/*  (partly overruled by SetPitch() in XF86) */
+/*********************************************/
+
+static void
+SiS_SetCRT1Offset(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+		  unsigned short ModeIdIndex, unsigned short rrti)
+{
+	unsigned short du = SiS_GetOffset(SiS_Pr, ModeNo, ModeIdIndex, rrti);
+	unsigned short infoflag = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag;
+	unsigned short temp;
+
+	temp = (du >> 8) & 0x0f;
+	SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0E, 0xF0, temp);
+
+	SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x13, (du & 0xFF));
+
+	if (infoflag & InterlaceMode)
+		du >>= 1;
+
+	du <<= 5;
+	temp = (du >> 8) & 0xff;
+	if (du & 0xff)
+		temp++;
+	temp++;
+	SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x10, temp);
+}
+
+/*********************************************/
+/*                  VCLK                     */
+/*********************************************/
+
+static void
+SiS_SetCRT1VCLK(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+		unsigned short rrti)
+{
+	unsigned short index = SiS_Pr->SiS_RefIndex[rrti].Ext_CRTVCLK;
+	unsigned short clka = SiS_Pr->SiS_VCLKData[index].SR2B;
+	unsigned short clkb = SiS_Pr->SiS_VCLKData[index].SR2C;
+
+	SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x31, 0xCF);
+
+	SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x2B, clka);
+	SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x2C, clkb);
+	SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x2D, 0x01);
+}
+
+/*********************************************/
+/*                  FIFO                     */
+/*********************************************/
+
+static void
+SiS_SetCRT1FIFO_310(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+		    unsigned short mi)
+{
+	unsigned short modeflag = SiS_Pr->SiS_EModeIDTable[mi].Ext_ModeFlag;
+
+	/* disable auto-threshold */
+	SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x3D, 0xFE);
+
+	SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x08, 0xAE);
+	SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x09, 0xF0);
+
+	if (ModeNo <= 0x13)
+		return;
+
+	if ((!(modeflag & DoubleScanMode)) || (!(modeflag & HalfDCLK))) {
+		SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x08, 0x34);
+		SiS_SetRegOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x3D, 0x01);
+	}
+}
+
+/*********************************************/
+/*              MODE REGISTERS               */
+/*********************************************/
+
+static void
+SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+		 unsigned short rrti)
+{
+	unsigned short data = 0, VCLK = 0, index = 0;
+
+	if (ModeNo > 0x13) {
+		index = SiS_Pr->SiS_RefIndex[rrti].Ext_CRTVCLK;
+		VCLK = SiS_Pr->SiS_VCLKData[index].CLOCK;
+	}
+
+	if (VCLK >= 166)
+		data |= 0x0c;
+	SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x32, 0xf3, data);
+
+	if (VCLK >= 166)
+		SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x1f, 0xe7);
+
+	/* DAC speed */
+	data = 0x03;
+	if (VCLK >= 260)
+		data = 0x00;
+	else if (VCLK >= 160)
+		data = 0x01;
+	else if (VCLK >= 135)
+		data = 0x02;
+
+	SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x07, 0xF8, data);
+}
+
+static void
+SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+		    unsigned short ModeIdIndex, unsigned short rrti)
+{
+	unsigned short data, infoflag = 0, modeflag;
+
+	if (ModeNo <= 0x13)
+		modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag;
+	else {
+		modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+		infoflag = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag;
+	}
+
+	/* Disable DPMS */
+	SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x1F, 0x3F);
+
+	data = 0;
+	if (ModeNo > 0x13) {
+		if (SiS_Pr->SiS_ModeType > ModeEGA) {
+			data |= 0x02;
+			data |= ((SiS_Pr->SiS_ModeType - ModeVGA) << 2);
+		}
+		if (infoflag & InterlaceMode)
+			data |= 0x20;
+	}
+	SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x06, 0xC0, data);
+
+	data = 0;
+	if (infoflag & InterlaceMode) {
+		/* data = (Hsync / 8) - ((Htotal / 8) / 2) + 3 */
+		unsigned short hrs =
+		    (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x04) |
+		     ((SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0b) & 0xc0) << 2))
+		    - 3;
+		unsigned short hto =
+		    (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x00) |
+		     ((SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0b) & 0x03) << 8))
+		    + 5;
+		data = hrs - (hto >> 1) + 3;
+	}
+	SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x19, (data & 0xFF));
+	SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3d4, 0x1a, 0xFC, (data >> 8));
+
+	if (modeflag & HalfDCLK)
+		SiS_SetRegOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x01, 0x08);
+
+	data = 0;
+	if (modeflag & LineCompareOff)
+		data = 0x08;
+	SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0F, 0xB7, data);
+
+	if ((SiS_Pr->SiS_ModeType == ModeEGA) && (ModeNo > 0x13))
+		SiS_SetRegOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0F, 0x40);
+
+	SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x31, 0xfb);
+
+	data = 0x60;
+	if (SiS_Pr->SiS_ModeType != ModeText) {
+		data ^= 0x60;
+		if (SiS_Pr->SiS_ModeType != ModeEGA)
+			data ^= 0xA0;
+	}
+	SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x21, 0x1F, data);
+
+	SiS_SetVCLKState(SiS_Pr, ModeNo, rrti);
+
+	if (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x31) & 0x40)
+		SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x52, 0x2c);
+	else
+		SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x52, 0x6c);
+}
+
+/*********************************************/
+/*                 LOAD DAC                  */
+/*********************************************/
+
+static void
+SiS_WriteDAC(struct SiS_Private *SiS_Pr, unsigned long DACData,
+	     unsigned short shiftflag, unsigned short dl, unsigned short ah,
+	     unsigned short al, unsigned short dh)
+{
+	unsigned short d1, d2, d3;
+
+	switch (dl) {
+	case 0:
+		d1 = dh;
+		d2 = ah;
+		d3 = al;
+		break;
+	case 1:
+		d1 = ah;
+		d2 = al;
+		d3 = dh;
+		break;
+	default:
+		d1 = al;
+		d2 = dh;
+		d3 = ah;
+	}
+	SiS_SetRegByte(SiS_Pr, DACData, (d1 << shiftflag));
+	SiS_SetRegByte(SiS_Pr, DACData, (d2 << shiftflag));
+	SiS_SetRegByte(SiS_Pr, DACData, (d3 << shiftflag));
+}
+
+static void
+SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+	    unsigned short mi)
+{
+	unsigned short data, data2, time, i, j, k, m, n, o;
+	unsigned short si, di, bx, sf;
+	unsigned long DACAddr, DACData;
+	const unsigned char *table = NULL;
+
+	if (ModeNo < 0x13)
+		data = SiS_Pr->SiS_SModeIDTable[mi].St_ModeFlag;
+	else
+		data = SiS_Pr->SiS_EModeIDTable[mi].Ext_ModeFlag;
+
+	data &= DACInfoFlag;
+
+	j = time = 64;
+	if (data == 0x00)
+		table = SiS_MDA_DAC;
+	else if (data == 0x08)
+		table = SiS_CGA_DAC;
+	else if (data == 0x10)
+		table = SiS_EGA_DAC;
+	else {
+		j = 16;
+		time = 256;
+		table = SiS_VGA_DAC;
+	}
+
+	DACAddr = SiS_Pr->SiS_P3c8;
+	DACData = SiS_Pr->SiS_P3c9;
+	sf = 0;
+	SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c6, 0xFF);
+
+	SiS_SetRegByte(SiS_Pr, DACAddr, 0x00);
+
+	for (i = 0; i < j; i++) {
+		data = table[i];
+		for (k = 0; k < 3; k++) {
+			data2 = 0;
+			if (data & 0x01)
+				data2 += 0x2A;
+			if (data & 0x02)
+				data2 += 0x15;
+			SiS_SetRegByte(SiS_Pr, DACData, (data2 << sf));
+			data >>= 2;
+		}
+	}
+
+	if (time == 256) {
+		for (i = 16; i < 32; i++) {
+			data = table[i] << sf;
+			for (k = 0; k < 3; k++)
+				SiS_SetRegByte(SiS_Pr, DACData, data);
+		}
+		si = 32;
+		for (m = 0; m < 9; m++) {
+			di = si;
+			bx = si + 4;
+			for (n = 0; n < 3; n++) {
+				for (o = 0; o < 5; o++) {
+					SiS_WriteDAC(SiS_Pr, DACData, sf, n,
+						     table[di], table[bx],
+						     table[si]);
+					si++;
+				}
+				si -= 2;
+				for (o = 0; o < 3; o++) {
+					SiS_WriteDAC(SiS_Pr, DACData, sf, n,
+						     table[di], table[si],
+						     table[bx]);
+					si--;
+				}
+			}
+			si += 5;
+		}
+	}
+}
+
+/*********************************************/
+/*         SET CRT1 REGISTER GROUP           */
+/*********************************************/
+
+static void
+SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+		 unsigned short ModeIdIndex)
+{
+	unsigned short StandTableIndex, rrti;
+
+	SiS_Pr->SiS_CRT1Mode = ModeNo;
+
+	if (ModeNo <= 0x13)
+		StandTableIndex = 0;
+	else
+		StandTableIndex = 1;
+
+	SiS_ResetSegmentRegisters(SiS_Pr);
+	SiS_SetSeqRegs(SiS_Pr, StandTableIndex);
+	SiS_SetMiscRegs(SiS_Pr, StandTableIndex);
+	SiS_SetCRTCRegs(SiS_Pr, StandTableIndex);
+	SiS_SetATTRegs(SiS_Pr, StandTableIndex);
+	SiS_SetGRCRegs(SiS_Pr, StandTableIndex);
+	SiS_ClearExt1Regs(SiS_Pr, ModeNo);
+
+	rrti = SiS_GetRatePtr(SiS_Pr, ModeNo, ModeIdIndex);
+
+	if (rrti != 0xFFFF) {
+		SiS_SetCRT1Sync(SiS_Pr, rrti);
+		SiS_SetCRT1CRTC(SiS_Pr, ModeNo, ModeIdIndex, rrti);
+		SiS_SetCRT1Offset(SiS_Pr, ModeNo, ModeIdIndex, rrti);
+		SiS_SetCRT1VCLK(SiS_Pr, ModeNo, rrti);
+	}
+
+	SiS_SetCRT1FIFO_310(SiS_Pr, ModeNo, ModeIdIndex);
+
+	SiS_SetCRT1ModeRegs(SiS_Pr, ModeNo, ModeIdIndex, rrti);
+
+	SiS_LoadDAC(SiS_Pr, ModeNo, ModeIdIndex);
+
+	SiS_DisplayOn(SiS_Pr);
+}
+
+/*********************************************/
+/*                 SiSSetMode()              */
+/*********************************************/
+
+int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
+{
+	unsigned short ModeIdIndex;
+	unsigned long BaseAddr = SiS_Pr->IOAddress;
+
+	SiSUSB_InitPtr(SiS_Pr);
+	SiSUSBRegInit(SiS_Pr, BaseAddr);
+	SiS_GetSysFlags(SiS_Pr);
+
+	if (!(SiS_SearchModeID(SiS_Pr, &ModeNo, &ModeIdIndex)))
+		return 0;
+
+	SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x05, 0x86);
+
+	SiSInitPCIetc(SiS_Pr);
+
+	ModeNo &= 0x7f;
+
+	SiS_Pr->SiS_ModeType =
+	    SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag & ModeTypeMask;
+
+	SiS_Pr->SiS_SetFlag = LowModeTests;
+
+	/* Set mode on CRT1 */
+	SiS_SetCRT1Group(SiS_Pr, ModeNo, ModeIdIndex);
+
+	SiS_HandleCRT1(SiS_Pr);
+
+	SiS_DisplayOn(SiS_Pr);
+	SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c6, 0xFF);
+
+	/* Store mode number */
+	SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x34, ModeNo);
+
+	return 1;
+}
+
+int SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo)
+{
+	unsigned short ModeNo = 0;
+	int i;
+
+	SiSUSB_InitPtr(SiS_Pr);
+
+	if (VModeNo == 0x03) {
+
+		ModeNo = 0x03;
+
+	} else {
+
+		i = 0;
+		do {
+
+			if (SiS_Pr->SiS_EModeIDTable[i].Ext_VESAID == VModeNo) {
+				ModeNo = SiS_Pr->SiS_EModeIDTable[i].Ext_ModeID;
+				break;
+			}
+
+		} while (SiS_Pr->SiS_EModeIDTable[i++].Ext_ModeID != 0xff);
+
+	}
+
+	if (!ModeNo)
+		return 0;
+
+	return SiSUSBSetMode(SiS_Pr, ModeNo);
+}
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.h b/drivers/usb/misc/sisusbvga/sisusb_init.h
new file mode 100644
index 000000000..b5cd77ae9
--- /dev/null
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.h
@@ -0,0 +1,180 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/* $XFree86$ */
+/* $XdotOrg$ */
+/*
+ * Data and prototypes for init.c
+ *
+ * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria
+ *
+ * If distributed as part of the Linux kernel, the following license terms
+ * apply:
+ *
+ * * This program is free software; you can redistribute it and/or modify
+ * * it under the terms of the GNU General Public License as published by
+ * * the Free Software Foundation; either version 2 of the named License,
+ * * or any later version.
+ * *
+ * * This program is distributed in the hope that it will be useful,
+ * * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * * GNU General Public License for more details.
+ * *
+ * * You should have received a copy of the GNU General Public License
+ * * along with this program; if not, write to the Free Software
+ * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
+ *
+ * Otherwise, the following license terms apply:
+ *
+ * * Redistribution and use in source and binary forms, with or without
+ * * modification, are permitted provided that the following conditions
+ * * are met:
+ * * 1) Redistributions of source code must retain the above copyright
+ * *    notice, this list of conditions and the following disclaimer.
+ * * 2) Redistributions in binary form must reproduce the above copyright
+ * *    notice, this list of conditions and the following disclaimer in the
+ * *    documentation and/or other materials provided with the distribution.
+ * * 3) The name of the author may not be used to endorse or promote products
+ * *    derived from this software without specific prior written permission.
+ * *
+ * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Author:	Thomas Winischhofer <thomas@winischhofer.net>
+ *
+ */
+
+#ifndef _SISUSB_INIT_H_
+#define _SISUSB_INIT_H_
+
+/* SiS_ModeType */
+#define ModeText		0x00
+#define ModeCGA			0x01
+#define ModeEGA			0x02
+#define ModeVGA			0x03
+#define Mode15Bpp		0x04
+#define Mode16Bpp		0x05
+#define Mode24Bpp		0x06
+#define Mode32Bpp		0x07
+
+#define ModeTypeMask		0x07
+#define IsTextMode		0x07
+
+#define DACInfoFlag		0x0018
+#define MemoryInfoFlag		0x01E0
+#define MemorySizeShift		5
+
+/* modeflag */
+#define Charx8Dot		0x0200
+#define LineCompareOff		0x0400
+#define CRT2Mode		0x0800
+#define HalfDCLK		0x1000
+#define NoSupportSimuTV		0x2000
+#define NoSupportLCDScale	0x4000	/* SiS bridge: No scaling possible (no matter what panel) */
+#define DoubleScanMode		0x8000
+
+/* Infoflag */
+#define SupportTV		0x0008
+#define SupportTV1024		0x0800
+#define SupportCHTV		0x0800
+#define Support64048060Hz	0x0800	/* Special for 640x480 LCD */
+#define SupportHiVision		0x0010
+#define SupportYPbPr750p	0x1000
+#define SupportLCD		0x0020
+#define SupportRAMDAC2		0x0040	/* All           (<= 100Mhz) */
+#define SupportRAMDAC2_135	0x0100	/* All except DH (<= 135Mhz) */
+#define SupportRAMDAC2_162	0x0200	/* B, C          (<= 162Mhz) */
+#define SupportRAMDAC2_202	0x0400	/* C             (<= 202Mhz) */
+#define InterlaceMode		0x0080
+#define SyncPP			0x0000
+#define SyncPN			0x4000
+#define SyncNP			0x8000
+#define SyncNN			0xc000
+
+/* SetFlag */
+#define ProgrammingCRT2		0x0001
+#define LowModeTests		0x0002
+#define LCDVESATiming		0x0008
+#define EnableLVDSDDA		0x0010
+#define SetDispDevSwitchFlag	0x0020
+#define CheckWinDos		0x0040
+#define SetDOSMode		0x0080
+
+/* Index in ModeResInfo table */
+#define SIS_RI_320x200		0
+#define SIS_RI_320x240		1
+#define SIS_RI_320x400		2
+#define SIS_RI_400x300		3
+#define SIS_RI_512x384		4
+#define SIS_RI_640x400		5
+#define SIS_RI_640x480		6
+#define SIS_RI_800x600		7
+#define SIS_RI_1024x768		8
+#define SIS_RI_1280x1024	9
+#define SIS_RI_1600x1200	10
+#define SIS_RI_1920x1440	11
+#define SIS_RI_2048x1536	12
+#define SIS_RI_720x480		13
+#define SIS_RI_720x576		14
+#define SIS_RI_1280x960		15
+#define SIS_RI_800x480		16
+#define SIS_RI_1024x576		17
+#define SIS_RI_1280x720		18
+#define SIS_RI_856x480		19
+#define SIS_RI_1280x768		20
+#define SIS_RI_1400x1050	21
+#define SIS_RI_1152x864		22	/* Up to here SiS conforming */
+#define SIS_RI_848x480		23
+#define SIS_RI_1360x768		24
+#define SIS_RI_1024x600		25
+#define SIS_RI_1152x768		26
+#define SIS_RI_768x576		27
+#define SIS_RI_1360x1024	28
+#define SIS_RI_1680x1050	29
+#define SIS_RI_1280x800		30
+#define SIS_RI_1920x1080	31
+#define SIS_RI_960x540		32
+#define SIS_RI_960x600		33
+
+#define SIS_VIDEO_CAPTURE	0x00 - 0x30
+#define SIS_VIDEO_PLAYBACK	0x02 - 0x30
+#define SIS_CRT2_PORT_04	0x04 - 0x30
+
+int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
+int SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo);
+
+extern int sisusb_setreg(struct sisusb_usb_data *sisusb, u32 port, u8 data);
+extern int sisusb_getreg(struct sisusb_usb_data *sisusb, u32 port, u8 * data);
+extern int sisusb_setidxreg(struct sisusb_usb_data *sisusb, u32 port,
+			    u8 index, u8 data);
+extern int sisusb_getidxreg(struct sisusb_usb_data *sisusb, u32 port,
+			    u8 index, u8 * data);
+extern int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, u32 port,
+				 u8 idx, u8 myand, u8 myor);
+extern int sisusb_setidxregor(struct sisusb_usb_data *sisusb, u32 port,
+			      u8 index, u8 myor);
+extern int sisusb_setidxregand(struct sisusb_usb_data *sisusb, u32 port,
+			       u8 idx, u8 myand);
+
+void sisusb_delete(struct kref *kref);
+int sisusb_writeb(struct sisusb_usb_data *sisusb, u32 adr, u8 data);
+int sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 * data);
+int sisusb_copy_memory(struct sisusb_usb_data *sisusb, u8 *src,
+		       u32 dest, int length);
+int sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init);
+int sisusbcon_do_font_op(struct sisusb_usb_data *sisusb, int set, int slot,
+			 u8 * arg, int cmapsz, int ch512, int dorecalc,
+			 struct vc_data *c, int fh, int uplock);
+void sisusb_set_cursor(struct sisusb_usb_data *sisusb, unsigned int location);
+int sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last);
+void sisusb_console_exit(struct sisusb_usb_data *sisusb);
+void sisusb_init_concode(void);
+
+#endif
diff --git a/drivers/usb/misc/sisusbvga/sisusb_struct.h b/drivers/usb/misc/sisusbvga/sisusb_struct.h
new file mode 100644
index 000000000..a86032a26
--- /dev/null
+++ b/drivers/usb/misc/sisusbvga/sisusb_struct.h
@@ -0,0 +1,162 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * General structure definitions for universal mode switching modules
+ *
+ * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria
+ *
+ * If distributed as part of the Linux kernel, the following license terms
+ * apply:
+ *
+ * * This program is free software; you can redistribute it and/or modify
+ * * it under the terms of the GNU General Public License as published by
+ * * the Free Software Foundation; either version 2 of the named License,
+ * * or any later version.
+ * *
+ * * This program is distributed in the hope that it will be useful,
+ * * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * * GNU General Public License for more details.
+ * *
+ * * You should have received a copy of the GNU General Public License
+ * * along with this program; if not, write to the Free Software
+ * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
+ *
+ * Otherwise, the following license terms apply:
+ *
+ * * Redistribution and use in source and binary forms, with or without
+ * * modification, are permitted provided that the following conditions
+ * * are met:
+ * * 1) Redistributions of source code must retain the above copyright
+ * *    notice, this list of conditions and the following disclaimer.
+ * * 2) Redistributions in binary form must reproduce the above copyright
+ * *    notice, this list of conditions and the following disclaimer in the
+ * *    documentation and/or other materials provided with the distribution.
+ * * 3) The name of the author may not be used to endorse or promote products
+ * *    derived from this software without specific prior written permission.
+ * *
+ * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Author:	Thomas Winischhofer <thomas@winischhofer.net>
+ *
+ */
+
+#ifndef _SISUSB_STRUCT_H_
+#define _SISUSB_STRUCT_H_
+
+struct SiS_St {
+	unsigned char St_ModeID;
+	unsigned short St_ModeFlag;
+	unsigned char St_StTableIndex;
+	unsigned char St_CRT2CRTC;
+	unsigned char St_ResInfo;
+	unsigned char VB_StTVFlickerIndex;
+	unsigned char VB_StTVEdgeIndex;
+	unsigned char VB_StTVYFilterIndex;
+	unsigned char St_PDC;
+};
+
+struct SiS_StandTable {
+	unsigned char CRT_COLS;
+	unsigned char ROWS;
+	unsigned char CHAR_HEIGHT;
+	unsigned short CRT_LEN;
+	unsigned char SR[4];
+	unsigned char MISC;
+	unsigned char CRTC[0x19];
+	unsigned char ATTR[0x14];
+	unsigned char GRC[9];
+};
+
+struct SiS_StResInfo_S {
+	unsigned short HTotal;
+	unsigned short VTotal;
+};
+
+struct SiS_Ext {
+	unsigned char Ext_ModeID;
+	unsigned short Ext_ModeFlag;
+	unsigned short Ext_VESAID;
+	unsigned char Ext_RESINFO;
+	unsigned char VB_ExtTVFlickerIndex;
+	unsigned char VB_ExtTVEdgeIndex;
+	unsigned char VB_ExtTVYFilterIndex;
+	unsigned char VB_ExtTVYFilterIndexROM661;
+	unsigned char REFindex;
+	signed char ROMMODEIDX661;
+};
+
+struct SiS_Ext2 {
+	unsigned short Ext_InfoFlag;
+	unsigned char Ext_CRT1CRTC;
+	unsigned char Ext_CRTVCLK;
+	unsigned char Ext_CRT2CRTC;
+	unsigned char Ext_CRT2CRTC_NS;
+	unsigned char ModeID;
+	unsigned short XRes;
+	unsigned short YRes;
+	unsigned char Ext_PDC;
+	unsigned char Ext_FakeCRT2CRTC;
+	unsigned char Ext_FakeCRT2Clk;
+};
+
+struct SiS_CRT1Table {
+	unsigned char CR[17];
+};
+
+struct SiS_VCLKData {
+	unsigned char SR2B, SR2C;
+	unsigned short CLOCK;
+};
+
+struct SiS_ModeResInfo {
+	unsigned short HTotal;
+	unsigned short VTotal;
+	unsigned char XChar;
+	unsigned char YChar;
+};
+
+struct SiS_Private {
+	void *sisusb;
+
+	unsigned long IOAddress;
+
+	unsigned long SiS_P3c4;
+	unsigned long SiS_P3d4;
+	unsigned long SiS_P3c0;
+	unsigned long SiS_P3ce;
+	unsigned long SiS_P3c2;
+	unsigned long SiS_P3ca;
+	unsigned long SiS_P3c6;
+	unsigned long SiS_P3c7;
+	unsigned long SiS_P3c8;
+	unsigned long SiS_P3c9;
+	unsigned long SiS_P3cb;
+	unsigned long SiS_P3cc;
+	unsigned long SiS_P3cd;
+	unsigned long SiS_P3da;
+	unsigned long SiS_Part1Port;
+
+	unsigned char SiS_MyCR63;
+	unsigned short SiS_CRT1Mode;
+	unsigned short SiS_ModeType;
+	unsigned short SiS_SetFlag;
+
+	const struct SiS_StandTable *SiS_StandTable;
+	const struct SiS_St *SiS_SModeIDTable;
+	const struct SiS_Ext *SiS_EModeIDTable;
+	const struct SiS_Ext2 *SiS_RefIndex;
+	const struct SiS_CRT1Table *SiS_CRT1Table;
+	const struct SiS_VCLKData *SiS_VCLKData;
+	const struct SiS_ModeResInfo *SiS_ModeResInfo;
+};
+
+#endif
diff --git a/drivers/usb/misc/sisusbvga/sisusb_tables.h b/drivers/usb/misc/sisusbvga/sisusb_tables.h
new file mode 100644
index 000000000..56972f1ec
--- /dev/null
+++ b/drivers/usb/misc/sisusbvga/sisusb_tables.h
@@ -0,0 +1,688 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/* $XFree86$ */
+/* $XdotOrg$ */
+/*
+ * Data tables for init.c
+ *
+ * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria
+ *
+ * If distributed as part of the Linux kernel, the following license terms
+ * apply:
+ *
+ * * This program is free software; you can redistribute it and/or modify
+ * * it under the terms of the GNU General Public License as published by
+ * * the Free Software Foundation; either version 2 of the named License,
+ * * or any later version.
+ * *
+ * * This program is distributed in the hope that it will be useful,
+ * * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * * GNU General Public License for more details.
+ * *
+ * * You should have received a copy of the GNU General Public License
+ * * along with this program; if not, write to the Free Software
+ * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
+ *
+ * Otherwise, the following license terms apply:
+ *
+ * * Redistribution and use in source and binary forms, with or without
+ * * modification, are permitted provided that the following conditions
+ * * are met:
+ * * 1) Redistributions of source code must retain the above copyright
+ * *    notice, this list of conditions and the following disclaimer.
+ * * 2) Redistributions in binary form must reproduce the above copyright
+ * *    notice, this list of conditions and the following disclaimer in the
+ * *    documentation and/or other materials provided with the distribution.
+ * * 3) The name of the author may not be used to endorse or promote products
+ * *    derived from this software without specific prior written permission.
+ * *
+ * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Author:	Thomas Winischhofer <thomas@winischhofer.net>
+ *
+ */
+
+#ifndef _SISUSB_TABLES_H_
+#define _SISUSB_TABLES_H_
+
+static const unsigned char SiS_MDA_DAC[] = {
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
+	0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
+	0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
+	0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
+	0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F
+};
+
+static const unsigned char SiS_CGA_DAC[] = {
+	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
+	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
+	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
+	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F
+};
+
+static const unsigned char SiS_EGA_DAC[] = {
+	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x05, 0x15,
+	0x20, 0x30, 0x24, 0x34, 0x21, 0x31, 0x25, 0x35,
+	0x08, 0x18, 0x0C, 0x1C, 0x09, 0x19, 0x0D, 0x1D,
+	0x28, 0x38, 0x2C, 0x3C, 0x29, 0x39, 0x2D, 0x3D,
+	0x02, 0x12, 0x06, 0x16, 0x03, 0x13, 0x07, 0x17,
+	0x22, 0x32, 0x26, 0x36, 0x23, 0x33, 0x27, 0x37,
+	0x0A, 0x1A, 0x0E, 0x1E, 0x0B, 0x1B, 0x0F, 0x1F,
+	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F
+};
+
+static const unsigned char SiS_VGA_DAC[] = {
+	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
+	0x00, 0x05, 0x08, 0x0B, 0x0E, 0x11, 0x14, 0x18,
+	0x1C, 0x20, 0x24, 0x28, 0x2D, 0x32, 0x38, 0x3F,
+	0x00, 0x10, 0x1F, 0x2F, 0x3F, 0x1F, 0x27, 0x2F,
+	0x37, 0x3F, 0x2D, 0x31, 0x36, 0x3A, 0x3F, 0x00,
+	0x07, 0x0E, 0x15, 0x1C, 0x0E, 0x11, 0x15, 0x18,
+	0x1C, 0x14, 0x16, 0x18, 0x1A, 0x1C, 0x00, 0x04,
+	0x08, 0x0C, 0x10, 0x08, 0x0A, 0x0C, 0x0E, 0x10,
+	0x0B, 0x0C, 0x0D, 0x0F, 0x10
+};
+
+static const struct SiS_St SiSUSB_SModeIDTable[] = {
+	{0x03, 0x0010, 0x18, 0x02, 0x02, 0x00, 0x01, 0x03, 0x40},
+	{0xff, 0x0000, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}
+};
+
+static const struct SiS_ModeResInfo SiSUSB_ModeResInfo[] = {
+	{320, 200, 8, 8},	/* 0x00 */
+	{320, 240, 8, 8},	/* 0x01 */
+	{320, 400, 8, 8},	/* 0x02 */
+	{400, 300, 8, 8},	/* 0x03 */
+	{512, 384, 8, 8},	/* 0x04 */
+	{640, 400, 8, 16},	/* 0x05 */
+	{640, 480, 8, 16},	/* 0x06 */
+	{800, 600, 8, 16},	/* 0x07 */
+	{1024, 768, 8, 16},	/* 0x08 */
+	{1280, 1024, 8, 16},	/* 0x09 */
+	{1600, 1200, 8, 16},	/* 0x0a */
+	{1920, 1440, 8, 16},	/* 0x0b */
+	{2048, 1536, 8, 16},	/* 0x0c */
+	{720, 480, 8, 16},	/* 0x0d */
+	{720, 576, 8, 16},	/* 0x0e */
+	{1280, 960, 8, 16},	/* 0x0f */
+	{800, 480, 8, 16},	/* 0x10 */
+	{1024, 576, 8, 16},	/* 0x11 */
+	{1280, 720, 8, 16},	/* 0x12 */
+	{856, 480, 8, 16},	/* 0x13 */
+	{1280, 768, 8, 16},	/* 0x14 */
+	{1400, 1050, 8, 16},	/* 0x15 */
+	{1152, 864, 8, 16},	/* 0x16 */
+	{848, 480, 8, 16},	/* 0x17 */
+	{1360, 768, 8, 16},	/* 0x18 */
+	{1024, 600, 8, 16},	/* 0x19 */
+	{1152, 768, 8, 16},	/* 0x1a */
+	{768, 576, 8, 16},	/* 0x1b */
+	{1360, 1024, 8, 16},	/* 0x1c */
+	{1680, 1050, 8, 16},	/* 0x1d */
+	{1280, 800, 8, 16},	/* 0x1e */
+	{1920, 1080, 8, 16},	/* 0x1f */
+	{960, 540, 8, 16},	/* 0x20 */
+	{960, 600, 8, 16}	/* 0x21 */
+};
+
+static const struct SiS_StandTable SiSUSB_StandTable[] = {
+	/* MD_3_400 - mode 0x03 - 400 */
+	{
+	 0x50, 0x18, 0x10, 0x1000,
+	 {0x00, 0x03, 0x00, 0x02},
+	 0x67,
+	 {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
+	  0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00,
+	  0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3,
+	  0xff},
+	 {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
+	  0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
+	  0x0c, 0x00, 0x0f, 0x08},
+	 {0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00, 0xff}
+	 },
+	/* Generic for VGA and higher */
+	{
+	 0x00, 0x00, 0x00, 0x0000,
+	 {0x01, 0x0f, 0x00, 0x0e},
+	 0x23,
+	 {0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0x0b, 0x3e,
+	  0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0xea, 0x8c, 0xdf, 0x28, 0x40, 0xe7, 0x04, 0xa3,
+	  0xff},
+	 {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	  0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+	  0x01, 0x00, 0x00, 0x00},
+	 {0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0f, 0xff}
+	 }
+};
+
+static const struct SiS_Ext SiSUSB_EModeIDTable[] = {
+	{0x2e, 0x0a1b, 0x0101, SIS_RI_640x480, 0x00, 0x00, 0x05, 0x05, 0x08, 2},	/* 640x480x8 */
+	{0x2f, 0x0a1b, 0x0100, SIS_RI_640x400, 0x00, 0x00, 0x05, 0x05, 0x10, 0},	/* 640x400x8 */
+	{0x30, 0x2a1b, 0x0103, SIS_RI_800x600, 0x00, 0x00, 0x07, 0x06, 0x00, 3},	/* 800x600x8 */
+	{0x31, 0x4a1b, 0x0000, SIS_RI_720x480, 0x00, 0x00, 0x06, 0x06, 0x11, -1},	/* 720x480x8 */
+	{0x32, 0x4a1b, 0x0000, SIS_RI_720x576, 0x00, 0x00, 0x06, 0x06, 0x12, -1},	/* 720x576x8 */
+	{0x33, 0x4a1d, 0x0000, SIS_RI_720x480, 0x00, 0x00, 0x06, 0x06, 0x11, -1},	/* 720x480x16 */
+	{0x34, 0x6a1d, 0x0000, SIS_RI_720x576, 0x00, 0x00, 0x06, 0x06, 0x12, -1},	/* 720x576x16 */
+	{0x35, 0x4a1f, 0x0000, SIS_RI_720x480, 0x00, 0x00, 0x06, 0x06, 0x11, -1},	/* 720x480x32 */
+	{0x36, 0x6a1f, 0x0000, SIS_RI_720x576, 0x00, 0x00, 0x06, 0x06, 0x12, -1},	/* 720x576x32 */
+	{0x38, 0x0a1b, 0x0105, SIS_RI_1024x768, 0x00, 0x00, 0x08, 0x07, 0x13, 4},	/* 1024x768x8 */
+	{0x3a, 0x0e3b, 0x0107, SIS_RI_1280x1024, 0x00, 0x00, 0x00, 0x00, 0x2f, 8},	/* 1280x1024x8 */
+	{0x41, 0x9a1d, 0x010e, SIS_RI_320x200, 0x00, 0x00, 0x04, 0x04, 0x1a, 0},	/* 320x200x16 */
+	{0x44, 0x0a1d, 0x0111, SIS_RI_640x480, 0x00, 0x00, 0x05, 0x05, 0x08, 2},	/* 640x480x16 */
+	{0x47, 0x2a1d, 0x0114, SIS_RI_800x600, 0x00, 0x00, 0x07, 0x06, 0x00, 3},	/* 800x600x16 */
+	{0x4a, 0x0a3d, 0x0117, SIS_RI_1024x768, 0x00, 0x00, 0x08, 0x07, 0x13, 4},	/* 1024x768x16 */
+	{0x4d, 0x0e7d, 0x011a, SIS_RI_1280x1024, 0x00, 0x00, 0x00, 0x00, 0x2f, 8},	/* 1280x1024x16 */
+	{0x50, 0x9a1b, 0x0132, SIS_RI_320x240, 0x00, 0x00, 0x04, 0x04, 0x1b, 2},	/* 320x240x8  */
+	{0x51, 0xba1b, 0x0133, SIS_RI_400x300, 0x00, 0x00, 0x07, 0x07, 0x1c, 3},	/* 400x300x8  */
+	{0x52, 0xba1b, 0x0134, SIS_RI_512x384, 0x00, 0x00, 0x00, 0x00, 0x1d, 4},	/* 512x384x8  */
+	{0x56, 0x9a1d, 0x0135, SIS_RI_320x240, 0x00, 0x00, 0x04, 0x04, 0x1b, 2},	/* 320x240x16 */
+	{0x57, 0xba1d, 0x0136, SIS_RI_400x300, 0x00, 0x00, 0x07, 0x07, 0x1c, 3},	/* 400x300x16 */
+	{0x58, 0xba1d, 0x0137, SIS_RI_512x384, 0x00, 0x00, 0x00, 0x00, 0x1d, 4},	/* 512x384x16 */
+	{0x59, 0x9a1b, 0x0138, SIS_RI_320x200, 0x00, 0x00, 0x04, 0x04, 0x1a, 0},	/* 320x200x8  */
+	{0x5c, 0xba1f, 0x0000, SIS_RI_512x384, 0x00, 0x00, 0x00, 0x00, 0x1d, 4},	/* 512x384x32 */
+	{0x5d, 0x0a1d, 0x0139, SIS_RI_640x400, 0x00, 0x00, 0x05, 0x07, 0x10, 0},	/* 640x400x16 */
+	{0x5e, 0x0a1f, 0x0000, SIS_RI_640x400, 0x00, 0x00, 0x05, 0x07, 0x10, 0},	/* 640x400x32 */
+	{0x62, 0x0a3f, 0x013a, SIS_RI_640x480, 0x00, 0x00, 0x05, 0x05, 0x08, 2},	/* 640x480x32 */
+	{0x63, 0x2a3f, 0x013b, SIS_RI_800x600, 0x00, 0x00, 0x07, 0x06, 0x00, 3},	/* 800x600x32 */
+	{0x64, 0x0a7f, 0x013c, SIS_RI_1024x768, 0x00, 0x00, 0x08, 0x07, 0x13, 4},	/* 1024x768x32 */
+	{0x65, 0x0eff, 0x013d, SIS_RI_1280x1024, 0x00, 0x00, 0x00, 0x00, 0x2f, 8},	/* 1280x1024x32 */
+	{0x70, 0x6a1b, 0x0000, SIS_RI_800x480, 0x00, 0x00, 0x07, 0x07, 0x1e, -1},	/* 800x480x8 */
+	{0x71, 0x4a1b, 0x0000, SIS_RI_1024x576, 0x00, 0x00, 0x00, 0x00, 0x21, -1},	/* 1024x576x8 */
+	{0x74, 0x4a1d, 0x0000, SIS_RI_1024x576, 0x00, 0x00, 0x00, 0x00, 0x21, -1},	/* 1024x576x16 */
+	{0x75, 0x0a3d, 0x0000, SIS_RI_1280x720, 0x00, 0x00, 0x00, 0x00, 0x24, 5},	/* 1280x720x16 */
+	{0x76, 0x6a1f, 0x0000, SIS_RI_800x480, 0x00, 0x00, 0x07, 0x07, 0x1e, -1},	/* 800x480x32 */
+	{0x77, 0x4a1f, 0x0000, SIS_RI_1024x576, 0x00, 0x00, 0x00, 0x00, 0x21, -1},	/* 1024x576x32 */
+	{0x78, 0x0a3f, 0x0000, SIS_RI_1280x720, 0x00, 0x00, 0x00, 0x00, 0x24, 5},	/* 1280x720x32 */
+	{0x79, 0x0a3b, 0x0000, SIS_RI_1280x720, 0x00, 0x00, 0x00, 0x00, 0x24, 5},	/* 1280x720x8 */
+	{0x7a, 0x6a1d, 0x0000, SIS_RI_800x480, 0x00, 0x00, 0x07, 0x07, 0x1e, -1},	/* 800x480x16 */
+	{0x23, 0x0e3b, 0x0000, SIS_RI_1280x768, 0x00, 0x00, 0x00, 0x00, 0x27, 6},	/* 1280x768x8 */
+	{0x24, 0x0e7d, 0x0000, SIS_RI_1280x768, 0x00, 0x00, 0x00, 0x00, 0x27, 6},	/* 1280x768x16 */
+	{0x25, 0x0eff, 0x0000, SIS_RI_1280x768, 0x00, 0x00, 0x00, 0x00, 0x27, 6},	/* 1280x768x32 */
+	{0x39, 0x6a1b, 0x0000, SIS_RI_848x480, 0x00, 0x00, 0x00, 0x00, 0x28, -1},	/* 848x480 */
+	{0x3b, 0x6a3d, 0x0000, SIS_RI_848x480, 0x00, 0x00, 0x00, 0x00, 0x28,
+	 -1},
+	{0x3e, 0x6a7f, 0x0000, SIS_RI_848x480, 0x00, 0x00, 0x00, 0x00, 0x28,
+	 -1},
+	{0x3f, 0x6a1b, 0x0000, SIS_RI_856x480, 0x00, 0x00, 0x00, 0x00, 0x2a, -1},	/* 856x480 */
+	{0x42, 0x6a3d, 0x0000, SIS_RI_856x480, 0x00, 0x00, 0x00, 0x00, 0x2a,
+	 -1},
+	{0x45, 0x6a7f, 0x0000, SIS_RI_856x480, 0x00, 0x00, 0x00, 0x00, 0x2a,
+	 -1},
+	{0x4f, 0x9a1f, 0x0000, SIS_RI_320x200, 0x00, 0x00, 0x04, 0x04, 0x1a, 0},	/* 320x200x32 */
+	{0x53, 0x9a1f, 0x0000, SIS_RI_320x240, 0x00, 0x00, 0x04, 0x04, 0x1b, 2},	/* 320x240x32 */
+	{0x54, 0xba1f, 0x0000, SIS_RI_400x300, 0x00, 0x00, 0x07, 0x07, 0x1c, 3},	/* 400x300x32 */
+	{0x5f, 0x6a1b, 0x0000, SIS_RI_768x576, 0x00, 0x00, 0x06, 0x06, 0x2c, -1},	/* 768x576 */
+	{0x60, 0x6a1d, 0x0000, SIS_RI_768x576, 0x00, 0x00, 0x06, 0x06, 0x2c,
+	 -1},
+	{0x61, 0x6a3f, 0x0000, SIS_RI_768x576, 0x00, 0x00, 0x06, 0x06, 0x2c,
+	 -1},
+	{0x1d, 0x6a1b, 0x0000, SIS_RI_960x540, 0x00, 0x00, 0x00, 0x00, 0x2d, -1},	/* 960x540 */
+	{0x1e, 0x6a3d, 0x0000, SIS_RI_960x540, 0x00, 0x00, 0x00, 0x00, 0x2d,
+	 -1},
+	{0x1f, 0x6a7f, 0x0000, SIS_RI_960x540, 0x00, 0x00, 0x00, 0x00, 0x2d,
+	 -1},
+	{0x20, 0x6a1b, 0x0000, SIS_RI_960x600, 0x00, 0x00, 0x00, 0x00, 0x2e, -1},	/* 960x600 */
+	{0x21, 0x6a3d, 0x0000, SIS_RI_960x600, 0x00, 0x00, 0x00, 0x00, 0x2e,
+	 -1},
+	{0x22, 0x6a7f, 0x0000, SIS_RI_960x600, 0x00, 0x00, 0x00, 0x00, 0x2e,
+	 -1},
+	{0x29, 0x4e1b, 0x0000, SIS_RI_1152x864, 0x00, 0x00, 0x00, 0x00, 0x33, -1},	/* 1152x864 */
+	{0x2a, 0x4e3d, 0x0000, SIS_RI_1152x864, 0x00, 0x00, 0x00, 0x00, 0x33,
+	 -1},
+	{0x2b, 0x4e7f, 0x0000, SIS_RI_1152x864, 0x00, 0x00, 0x00, 0x00, 0x33,
+	 -1},
+	{0xff, 0x0000, 0x0000, 0, 0x00, 0x00, 0x00, 0x00, 0x00, -1}
+};
+
+static const struct SiS_Ext2 SiSUSB_RefIndex[] = {
+	{0x085f, 0x0d, 0x03, 0x05, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00},	/* 0x0 */
+	{0x0067, 0x0e, 0x04, 0x05, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00},	/* 0x1 */
+	{0x0067, 0x0f, 0x08, 0x48, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00},	/* 0x2 */
+	{0x0067, 0x10, 0x07, 0x8b, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00},	/* 0x3 */
+	{0x0047, 0x11, 0x0a, 0x00, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00},	/* 0x4 */
+	{0x0047, 0x12, 0x0d, 0x00, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00},	/* 0x5 */
+	{0x0047, 0x13, 0x13, 0x00, 0x05, 0x30, 800, 600, 0x20, 0x00, 0x00},	/* 0x6 */
+	{0x0107, 0x14, 0x1c, 0x00, 0x05, 0x30, 800, 600, 0x20, 0x00, 0x00},	/* 0x7 */
+	{0xc85f, 0x05, 0x00, 0x04, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00},	/* 0x8 */
+	{0xc067, 0x06, 0x02, 0x04, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00},	/* 0x9 */
+	{0xc067, 0x07, 0x02, 0x47, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00},	/* 0xa */
+	{0xc067, 0x08, 0x03, 0x8a, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00},	/* 0xb */
+	{0xc047, 0x09, 0x05, 0x00, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00},	/* 0xc */
+	{0xc047, 0x0a, 0x09, 0x00, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00},	/* 0xd */
+	{0xc047, 0x0b, 0x0e, 0x00, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00},	/* 0xe */
+	{0xc047, 0x0c, 0x15, 0x00, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00},	/* 0xf */
+	{0x487f, 0x04, 0x00, 0x00, 0x00, 0x2f, 640, 400, 0x30, 0x55, 0x6e},	/* 0x10 */
+	{0xc06f, 0x3c, 0x01, 0x06, 0x13, 0x31, 720, 480, 0x30, 0x00, 0x00},	/* 0x11 */
+	{0x006f, 0x3d, 0x6f, 0x06, 0x14, 0x32, 720, 576, 0x30, 0x00, 0x00},	/* 0x12 (6f was 03) */
+	{0x0087, 0x15, 0x06, 0x00, 0x06, 0x38, 1024, 768, 0x30, 0x00, 0x00},	/* 0x13 */
+	{0xc877, 0x16, 0x0b, 0x06, 0x06, 0x38, 1024, 768, 0x20, 0x00, 0x00},	/* 0x14 */
+	{0xc067, 0x17, 0x0f, 0x49, 0x06, 0x38, 1024, 768, 0x20, 0x00, 0x00},	/* 0x15 */
+	{0x0067, 0x18, 0x11, 0x00, 0x06, 0x38, 1024, 768, 0x20, 0x00, 0x00},	/* 0x16 */
+	{0x0047, 0x19, 0x16, 0x8c, 0x06, 0x38, 1024, 768, 0x20, 0x00, 0x00},	/* 0x17 */
+	{0x0107, 0x1a, 0x1b, 0x00, 0x06, 0x38, 1024, 768, 0x10, 0x00, 0x00},	/* 0x18 */
+	{0x0107, 0x1b, 0x1f, 0x00, 0x06, 0x38, 1024, 768, 0x10, 0x00, 0x00},	/* 0x19 */
+	{0x407f, 0x00, 0x00, 0x00, 0x00, 0x41, 320, 200, 0x30, 0x56, 0x4e},	/* 0x1a */
+	{0xc07f, 0x01, 0x00, 0x04, 0x04, 0x50, 320, 240, 0x30, 0x00, 0x00},	/* 0x1b */
+	{0x007f, 0x02, 0x04, 0x05, 0x05, 0x51, 400, 300, 0x30, 0x00, 0x00},	/* 0x1c */
+	{0xc077, 0x03, 0x0b, 0x06, 0x06, 0x52, 512, 384, 0x30, 0x00, 0x00},	/* 0x1d */
+	{0x0077, 0x32, 0x40, 0x08, 0x18, 0x70, 800, 480, 0x30, 0x00, 0x00},	/* 0x1e */
+	{0x0047, 0x33, 0x07, 0x08, 0x18, 0x70, 800, 480, 0x30, 0x00, 0x00},	/* 0x1f */
+	{0x0047, 0x34, 0x0a, 0x08, 0x18, 0x70, 800, 480, 0x30, 0x00, 0x00},	/* 0x20 */
+	{0x0077, 0x35, 0x0b, 0x09, 0x19, 0x71, 1024, 576, 0x30, 0x00, 0x00},	/* 0x21 */
+	{0x0047, 0x36, 0x11, 0x09, 0x19, 0x71, 1024, 576, 0x30, 0x00, 0x00},	/* 0x22 */
+	{0x0047, 0x37, 0x16, 0x09, 0x19, 0x71, 1024, 576, 0x30, 0x00, 0x00},	/* 0x23 */
+	{0x1137, 0x38, 0x19, 0x0a, 0x0c, 0x75, 1280, 720, 0x30, 0x00, 0x00},	/* 0x24 */
+	{0x1107, 0x39, 0x1e, 0x0a, 0x0c, 0x75, 1280, 720, 0x30, 0x00, 0x00},	/* 0x25 */
+	{0x1307, 0x3a, 0x20, 0x0a, 0x0c, 0x75, 1280, 720, 0x30, 0x00, 0x00},	/* 0x26 */
+	{0x0077, 0x42, 0x5b, 0x08, 0x11, 0x23, 1280, 768, 0x30, 0x00, 0x00},	/* 0x27 */
+	{0x0087, 0x45, 0x57, 0x00, 0x16, 0x39, 848, 480, 0x30, 0x00, 0x00},	/* 0x28 38Hzi  */
+	{0xc067, 0x46, 0x55, 0x0b, 0x16, 0x39, 848, 480, 0x30, 0x00, 0x00},	/* 0x29 848x480-60Hz   */
+	{0x0087, 0x47, 0x57, 0x00, 0x17, 0x3f, 856, 480, 0x30, 0x00, 0x00},	/* 0x2a 856x480-38Hzi  */
+	{0xc067, 0x48, 0x57, 0x00, 0x17, 0x3f, 856, 480, 0x30, 0x00, 0x00},	/* 0x2b 856x480-60Hz   */
+	{0x006f, 0x4d, 0x71, 0x06, 0x15, 0x5f, 768, 576, 0x30, 0x00, 0x00},	/* 0x2c 768x576-56Hz   */
+	{0x0067, 0x52, 0x6a, 0x00, 0x1c, 0x1d, 960, 540, 0x30, 0x00, 0x00},	/* 0x2d 960x540 60Hz */
+	{0x0077, 0x53, 0x6b, 0x0b, 0x1d, 0x20, 960, 600, 0x30, 0x00, 0x00},	/* 0x2e 960x600 60Hz */
+	{0x0087, 0x1c, 0x11, 0x00, 0x07, 0x3a, 1280, 1024, 0x30, 0x00, 0x00},	/* 0x2f */
+	{0x0137, 0x1d, 0x19, 0x07, 0x07, 0x3a, 1280, 1024, 0x00, 0x00, 0x00},	/* 0x30 */
+	{0x0107, 0x1e, 0x1e, 0x00, 0x07, 0x3a, 1280, 1024, 0x00, 0x00, 0x00},	/* 0x31 */
+	{0x0207, 0x1f, 0x20, 0x00, 0x07, 0x3a, 1280, 1024, 0x00, 0x00, 0x00},	/* 0x32 */
+	{0x0127, 0x54, 0x6d, 0x00, 0x1a, 0x29, 1152, 864, 0x30, 0x00, 0x00},	/* 0x33 1152x864-60Hz  */
+	{0x0127, 0x44, 0x19, 0x00, 0x1a, 0x29, 1152, 864, 0x30, 0x00, 0x00},	/* 0x34 1152x864-75Hz  */
+	{0x0127, 0x4a, 0x1e, 0x00, 0x1a, 0x29, 1152, 864, 0x30, 0x00, 0x00},	/* 0x35 1152x864-85Hz  */
+	{0xffff, 0x00, 0x00, 0x00, 0x00, 0x00, 0, 0, 0, 0x00, 0x00}
+};
+
+static const struct SiS_CRT1Table SiSUSB_CRT1Table[] = {
+	{{0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0xbf, 0x1f,
+	  0x9c, 0x8e, 0x8f, 0x96, 0xb9, 0x30, 0x00, 0x00,
+	  0x00}},		/* 0x0 */
+	{{0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0x0b, 0x3e,
+	  0xe9, 0x8b, 0xdf, 0xe7, 0x04, 0x00, 0x00, 0x00,
+	  0x00}},		/* 0x1 */
+	{{0x3d, 0x31, 0x31, 0x81, 0x37, 0x1f, 0x72, 0xf0,
+	  0x58, 0x8c, 0x57, 0x57, 0x73, 0x20, 0x00, 0x05,
+	  0x01}},		/* 0x2 */
+	{{0x4f, 0x3f, 0x3f, 0x93, 0x45, 0x0d, 0x24, 0xf5,
+	  0x02, 0x88, 0xff, 0xff, 0x25, 0x10, 0x00, 0x01,
+	  0x01}},		/* 0x3 */
+	{{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
+	  0x9c, 0x8e, 0x8f, 0x96, 0xb9, 0x30, 0x00, 0x05,
+	  0x00}},		/* 0x4 */
+	{{0x5f, 0x4f, 0x4f, 0x83, 0x55, 0x81, 0x0b, 0x3e,
+	  0xe9, 0x8b, 0xdf, 0xe8, 0x0c, 0x00, 0x00, 0x05,
+	  0x00}},		/* 0x5 */
+	{{0x63, 0x4f, 0x4f, 0x87, 0x56, 0x9b, 0x06, 0x3e,
+	  0xe8, 0x8a, 0xdf, 0xe7, 0x07, 0x00, 0x00, 0x01,
+	  0x00}},		/* 0x6 */
+	{{0x64, 0x4f, 0x4f, 0x88, 0x55, 0x9d, 0xf2, 0x1f,
+	  0xe0, 0x83, 0xdf, 0xdf, 0xf3, 0x10, 0x00, 0x01,
+	  0x00}},		/* 0x7 */
+	{{0x63, 0x4f, 0x4f, 0x87, 0x5a, 0x81, 0xfb, 0x1f,
+	  0xe0, 0x83, 0xdf, 0xdf, 0xfc, 0x10, 0x00, 0x05,
+	  0x00}},		/* 0x8 */
+	{{0x65, 0x4f, 0x4f, 0x89, 0x58, 0x80, 0xfb, 0x1f,
+	  0xe0, 0x83, 0xdf, 0xdf, 0xfc, 0x10, 0x00, 0x05,
+	  0x61}},		/* 0x9 */
+	{{0x65, 0x4f, 0x4f, 0x89, 0x58, 0x80, 0x01, 0x3e,
+	  0xe0, 0x83, 0xdf, 0xdf, 0x02, 0x00, 0x00, 0x05,
+	  0x61}},		/* 0xa */
+	{{0x67, 0x4f, 0x4f, 0x8b, 0x58, 0x81, 0x0d, 0x3e,
+	  0xe0, 0x83, 0xdf, 0xdf, 0x0e, 0x00, 0x00, 0x05,
+	  0x61}},		/* 0xb */
+	{{0x65, 0x4f, 0x4f, 0x89, 0x57, 0x9f, 0xfb, 0x1f,
+	  0xe6, 0x8a, 0xdf, 0xdf, 0xfc, 0x10, 0x00, 0x01,
+	  0x00}},		/* 0xc */
+	{{0x7b, 0x63, 0x63, 0x9f, 0x6a, 0x93, 0x6f, 0xf0,
+	  0x58, 0x8a, 0x57, 0x57, 0x70, 0x20, 0x00, 0x05,
+	  0x01}},		/* 0xd */
+	{{0x7f, 0x63, 0x63, 0x83, 0x6c, 0x1c, 0x72, 0xf0,
+	  0x58, 0x8c, 0x57, 0x57, 0x73, 0x20, 0x00, 0x06,
+	  0x01}},		/* 0xe */
+	{{0x7d, 0x63, 0x63, 0x81, 0x6e, 0x1d, 0x98, 0xf0,
+	  0x7c, 0x82, 0x57, 0x57, 0x99, 0x00, 0x00, 0x06,
+	  0x01}},		/* 0xf */
+	{{0x7f, 0x63, 0x63, 0x83, 0x69, 0x13, 0x6f, 0xf0,
+	  0x58, 0x8b, 0x57, 0x57, 0x70, 0x20, 0x00, 0x06,
+	  0x01}},		/* 0x10 */
+	{{0x7e, 0x63, 0x63, 0x82, 0x6b, 0x13, 0x75, 0xf0,
+	  0x58, 0x8b, 0x57, 0x57, 0x76, 0x20, 0x00, 0x06,
+	  0x01}},		/* 0x11 */
+	{{0x81, 0x63, 0x63, 0x85, 0x6d, 0x18, 0x7a, 0xf0,
+	  0x58, 0x8b, 0x57, 0x57, 0x7b, 0x20, 0x00, 0x06,
+	  0x61}},		/* 0x12 */
+	{{0x83, 0x63, 0x63, 0x87, 0x6e, 0x19, 0x81, 0xf0,
+	  0x58, 0x8b, 0x57, 0x57, 0x82, 0x20, 0x00, 0x06,
+	  0x61}},		/* 0x13 */
+	{{0x85, 0x63, 0x63, 0x89, 0x6f, 0x1a, 0x91, 0xf0,
+	  0x58, 0x8b, 0x57, 0x57, 0x92, 0x20, 0x00, 0x06,
+	  0x61}},		/* 0x14 */
+	{{0x99, 0x7f, 0x7f, 0x9d, 0x84, 0x1a, 0x96, 0x1f,
+	  0x7f, 0x83, 0x7f, 0x7f, 0x97, 0x10, 0x00, 0x02,
+	  0x00}},		/* 0x15 */
+	{{0xa3, 0x7f, 0x7f, 0x87, 0x86, 0x97, 0x24, 0xf5,
+	  0x02, 0x88, 0xff, 0xff, 0x25, 0x10, 0x00, 0x02,
+	  0x01}},		/* 0x16 */
+	{{0xa1, 0x7f, 0x7f, 0x85, 0x86, 0x97, 0x24, 0xf5,
+	  0x02, 0x88, 0xff, 0xff, 0x25, 0x10, 0x00, 0x02,
+	  0x01}},		/* 0x17 */
+	{{0x9f, 0x7f, 0x7f, 0x83, 0x85, 0x91, 0x1e, 0xf5,
+	  0x00, 0x83, 0xff, 0xff, 0x1f, 0x10, 0x00, 0x02,
+	  0x01}},		/* 0x18 */
+	{{0xa7, 0x7f, 0x7f, 0x8b, 0x89, 0x95, 0x26, 0xf5,
+	  0x00, 0x83, 0xff, 0xff, 0x27, 0x10, 0x00, 0x02,
+	  0x01}},		/* 0x19 */
+	{{0xa9, 0x7f, 0x7f, 0x8d, 0x8c, 0x9a, 0x2c, 0xf5,
+	  0x00, 0x83, 0xff, 0xff, 0x2d, 0x14, 0x00, 0x02,
+	  0x62}},		/* 0x1a */
+	{{0xab, 0x7f, 0x7f, 0x8f, 0x8d, 0x9b, 0x35, 0xf5,
+	  0x00, 0x83, 0xff, 0xff, 0x36, 0x14, 0x00, 0x02,
+	  0x62}},		/* 0x1b */
+	{{0xcf, 0x9f, 0x9f, 0x93, 0xb2, 0x01, 0x14, 0xba,
+	  0x00, 0x83, 0xff, 0xff, 0x15, 0x00, 0x00, 0x03,
+	  0x00}},		/* 0x1c */
+	{{0xce, 0x9f, 0x9f, 0x92, 0xa9, 0x17, 0x28, 0x5a,
+	  0x00, 0x83, 0xff, 0xff, 0x29, 0x09, 0x00, 0x07,
+	  0x01}},		/* 0x1d */
+	{{0xce, 0x9f, 0x9f, 0x92, 0xa5, 0x17, 0x28, 0x5a,
+	  0x00, 0x83, 0xff, 0xff, 0x29, 0x09, 0x00, 0x07,
+	  0x01}},		/* 0x1e */
+	{{0xd3, 0x9f, 0x9f, 0x97, 0xab, 0x1f, 0x2e, 0x5a,
+	  0x00, 0x83, 0xff, 0xff, 0x2f, 0x09, 0x00, 0x07,
+	  0x01}},		/* 0x1f */
+	{{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+	  0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+	  0x00}},		/* 0x20 */
+	{{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+	  0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+	  0x00}},		/* 0x21 */
+	{{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+	  0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+	  0x00}},		/* 0x22 */
+	{{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+	  0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+	  0x00}},		/* 0x23 */
+	{{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+	  0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+	  0x00}},		/* 0x24 */
+	{{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+	  0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+	  0x00}},		/* 0x25 */
+	{{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+	  0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+	  0x00}},		/* 0x26 */
+	{{0x40, 0xef, 0xef, 0x84, 0x03, 0x1d, 0xda, 0x1f,
+	  0xa0, 0x83, 0x9f, 0x9f, 0xdb, 0x1f, 0x41, 0x01,
+	  0x00}},		/* 0x27 */
+	{{0x43, 0xef, 0xef, 0x87, 0x06, 0x00, 0xd4, 0x1f,
+	  0xa0, 0x83, 0x9f, 0x9f, 0xd5, 0x1f, 0x41, 0x05,
+	  0x63}},		/* 0x28 */
+	{{0x45, 0xef, 0xef, 0x89, 0x07, 0x01, 0xd9, 0x1f,
+	  0xa0, 0x83, 0x9f, 0x9f, 0xda, 0x1f, 0x41, 0x05,
+	  0x63}},		/* 0x29 */
+	{{0x40, 0xef, 0xef, 0x84, 0x03, 0x1d, 0xda, 0x1f,
+	  0xa0, 0x83, 0x9f, 0x9f, 0xdb, 0x1f, 0x41, 0x01,
+	  0x00}},		/* 0x2a */
+	{{0x40, 0xef, 0xef, 0x84, 0x03, 0x1d, 0xda, 0x1f,
+	  0xa0, 0x83, 0x9f, 0x9f, 0xdb, 0x1f, 0x41, 0x01,
+	  0x00}},		/* 0x2b */
+	{{0x40, 0xef, 0xef, 0x84, 0x03, 0x1d, 0xda, 0x1f,
+	  0xa0, 0x83, 0x9f, 0x9f, 0xdb, 0x1f, 0x41, 0x01,
+	  0x00}},		/* 0x2c */
+	{{0x59, 0xff, 0xff, 0x9d, 0x17, 0x13, 0x33, 0xba,
+	  0x00, 0x83, 0xff, 0xff, 0x34, 0x0f, 0x41, 0x05,
+	  0x44}},		/* 0x2d */
+	{{0x5b, 0xff, 0xff, 0x9f, 0x18, 0x14, 0x38, 0xba,
+	  0x00, 0x83, 0xff, 0xff, 0x39, 0x0f, 0x41, 0x05,
+	  0x44}},		/* 0x2e */
+	{{0x5b, 0xff, 0xff, 0x9f, 0x18, 0x14, 0x3d, 0xba,
+	  0x00, 0x83, 0xff, 0xff, 0x3e, 0x0f, 0x41, 0x05,
+	  0x44}},		/* 0x2f */
+	{{0x5d, 0xff, 0xff, 0x81, 0x19, 0x95, 0x41, 0xba,
+	  0x00, 0x84, 0xff, 0xff, 0x42, 0x0f, 0x41, 0x05,
+	  0x44}},		/* 0x30 */
+	{{0x55, 0xff, 0xff, 0x99, 0x0d, 0x0c, 0x3e, 0xba,
+	  0x00, 0x84, 0xff, 0xff, 0x3f, 0x0f, 0x41, 0x05,
+	  0x00}},		/* 0x31 */
+	{{0x7f, 0x63, 0x63, 0x83, 0x6c, 0x1c, 0x72, 0xba,
+	  0x27, 0x8b, 0xdf, 0xdf, 0x73, 0x00, 0x00, 0x06,
+	  0x01}},		/* 0x32 */
+	{{0x7f, 0x63, 0x63, 0x83, 0x69, 0x13, 0x6f, 0xba,
+	  0x26, 0x89, 0xdf, 0xdf, 0x6f, 0x00, 0x00, 0x06,
+	  0x01}},		/* 0x33 */
+	{{0x7f, 0x63, 0x63, 0x82, 0x6b, 0x13, 0x75, 0xba,
+	  0x29, 0x8c, 0xdf, 0xdf, 0x75, 0x00, 0x00, 0x06,
+	  0x01}},		/* 0x34 */
+	{{0xa3, 0x7f, 0x7f, 0x87, 0x86, 0x97, 0x24, 0xf1,
+	  0xaf, 0x85, 0x3f, 0x3f, 0x25, 0x30, 0x00, 0x02,
+	  0x01}},		/* 0x35 */
+	{{0x9f, 0x7f, 0x7f, 0x83, 0x85, 0x91, 0x1e, 0xf1,
+	  0xad, 0x81, 0x3f, 0x3f, 0x1f, 0x30, 0x00, 0x02,
+	  0x01}},		/* 0x36 */
+	{{0xa7, 0x7f, 0x7f, 0x88, 0x89, 0x95, 0x26, 0xf1,
+	  0xb1, 0x85, 0x3f, 0x3f, 0x27, 0x30, 0x00, 0x02,
+	  0x01}},		/* 0x37 */
+	{{0xce, 0x9f, 0x9f, 0x92, 0xa9, 0x17, 0x28, 0xc4,
+	  0x7a, 0x8e, 0xcf, 0xcf, 0x29, 0x21, 0x00, 0x07,
+	  0x01}},		/* 0x38 */
+	{{0xce, 0x9f, 0x9f, 0x92, 0xa5, 0x17, 0x28, 0xd4,
+	  0x7a, 0x8e, 0xcf, 0xcf, 0x29, 0x21, 0x00, 0x07,
+	  0x01}},		/* 0x39 */
+	{{0xd3, 0x9f, 0x9f, 0x97, 0xab, 0x1f, 0x2e, 0xd4,
+	  0x7d, 0x81, 0xcf, 0xcf, 0x2f, 0x21, 0x00, 0x07,
+	  0x01}},		/* 0x3a */
+	{{0xdc, 0x9f, 0x9f, 0x80, 0xaf, 0x9d, 0xe6, 0xff,
+	  0xc0, 0x83, 0xbf, 0xbf, 0xe7, 0x10, 0x00, 0x07,
+	  0x01}},		/* 0x3b */
+	{{0x6b, 0x59, 0x59, 0x8f, 0x5e, 0x8c, 0x0b, 0x3e,
+	  0xe9, 0x8b, 0xdf, 0xe7, 0x04, 0x00, 0x00, 0x05,
+	  0x00}},		/* 0x3c */
+	{{0x6d, 0x59, 0x59, 0x91, 0x60, 0x89, 0x53, 0xf0,
+	  0x41, 0x84, 0x3f, 0x3f, 0x54, 0x00, 0x00, 0x05,
+	  0x41}},		/* 0x3d */
+	{{0x86, 0x6a, 0x6a, 0x8a, 0x74, 0x06, 0x8c, 0x15,
+	  0x4f, 0x83, 0xef, 0xef, 0x8d, 0x30, 0x00, 0x02,
+	  0x00}},		/* 0x3e */
+	{{0x81, 0x6a, 0x6a, 0x85, 0x70, 0x00, 0x0f, 0x3e,
+	  0xeb, 0x8e, 0xdf, 0xdf, 0x10, 0x00, 0x00, 0x02,
+	  0x00}},		/* 0x3f */
+	{{0xa3, 0x7f, 0x7f, 0x87, 0x86, 0x97, 0x1e, 0xf1,
+	  0xae, 0x85, 0x57, 0x57, 0x1f, 0x30, 0x00, 0x02,
+	  0x01}},		/* 0x40 */
+	{{0xa3, 0x7f, 0x7f, 0x87, 0x86, 0x97, 0x24, 0xf5,
+	  0x02, 0x88, 0xff, 0xff, 0x25, 0x10, 0x00, 0x02,
+	  0x01}},		/* 0x41 */
+	{{0xce, 0x9f, 0x9f, 0x92, 0xa9, 0x17, 0x20, 0xf5,
+	  0x03, 0x88, 0xff, 0xff, 0x21, 0x10, 0x00, 0x07,
+	  0x01}},		/* 0x42 */
+	{{0xe6, 0xae, 0xae, 0x8a, 0xbd, 0x90, 0x3d, 0x10,
+	  0x1a, 0x8d, 0x19, 0x19, 0x3e, 0x2f, 0x00, 0x03,
+	  0x00}},		/* 0x43 */
+	{{0xc3, 0x8f, 0x8f, 0x87, 0x9b, 0x0b, 0x82, 0xef,
+	  0x60, 0x83, 0x5f, 0x5f, 0x83, 0x10, 0x00, 0x07,
+	  0x01}},		/* 0x44 */
+	{{0x86, 0x69, 0x69, 0x8A, 0x74, 0x06, 0x8C, 0x15,
+	  0x4F, 0x83, 0xEF, 0xEF, 0x8D, 0x30, 0x00, 0x02,
+	  0x00}},		/* 0x45 */
+	{{0x83, 0x69, 0x69, 0x87, 0x6f, 0x1d, 0x03, 0x3E,
+	  0xE5, 0x8d, 0xDF, 0xe4, 0x04, 0x00, 0x00, 0x06,
+	  0x00}},		/* 0x46 */
+	{{0x86, 0x6A, 0x6A, 0x8A, 0x74, 0x06, 0x8C, 0x15,
+	  0x4F, 0x83, 0xEF, 0xEF, 0x8D, 0x30, 0x00, 0x02,
+	  0x00}},		/* 0x47 */
+	{{0x81, 0x6A, 0x6A, 0x85, 0x70, 0x00, 0x0F, 0x3E,
+	  0xEB, 0x8E, 0xDF, 0xDF, 0x10, 0x00, 0x00, 0x02,
+	  0x00}},		/* 0x48 */
+	{{0xdd, 0xa9, 0xa9, 0x81, 0xb4, 0x97, 0x26, 0xfd,
+	  0x01, 0x8d, 0xff, 0x00, 0x27, 0x10, 0x00, 0x03,
+	  0x01}},		/* 0x49 */
+	{{0xd9, 0x8f, 0x8f, 0x9d, 0xba, 0x0a, 0x8a, 0xff,
+	  0x60, 0x8b, 0x5f, 0x5f, 0x8b, 0x10, 0x00, 0x03,
+	  0x01}},		/* 0x4a */
+	{{0xea, 0xae, 0xae, 0x8e, 0xba, 0x82, 0x40, 0x10,
+	  0x1b, 0x87, 0x19, 0x1a, 0x41, 0x0f, 0x00, 0x03,
+	  0x00}},		/* 0x4b */
+	{{0xd3, 0x9f, 0x9f, 0x97, 0xab, 0x1f, 0xf1, 0xff,
+	  0xc0, 0x83, 0xbf, 0xbf, 0xf2, 0x10, 0x00, 0x07,
+	  0x01}},		/* 0x4c */
+	{{0x75, 0x5f, 0x5f, 0x99, 0x66, 0x90, 0x53, 0xf0,
+	  0x41, 0x84, 0x3f, 0x3f, 0x54, 0x00, 0x00, 0x05,
+	  0x41}},
+	{{0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0x0b, 0x3e,
+	  0xe9, 0x8b, 0xdf, 0xe7, 0x04, 0x00, 0x00, 0x00,
+	  0x00}},		/* 0x4e */
+	{{0xcd, 0x9f, 0x9f, 0x91, 0xab, 0x1c, 0x3a, 0xff,
+	  0x20, 0x83, 0x1f, 0x1f, 0x3b, 0x10, 0x00, 0x07,
+	  0x21}},		/* 0x4f */
+	{{0x15, 0xd1, 0xd1, 0x99, 0xe2, 0x19, 0x3d, 0x10,
+	  0x1a, 0x8d, 0x19, 0x19, 0x3e, 0x2f, 0x01, 0x0c,
+	  0x20}},		/* 0x50 */
+	{{0x0e, 0xef, 0xef, 0x92, 0xfe, 0x03, 0x30, 0xf0,
+	  0x1e, 0x83, 0x1b, 0x1c, 0x31, 0x00, 0x01, 0x00,
+	  0x61}},		/* 0x51 */
+	{{0x85, 0x77, 0x77, 0x89, 0x7d, 0x01, 0x31, 0xf0,
+	  0x1e, 0x84, 0x1b, 0x1c, 0x32, 0x00, 0x00, 0x02,
+	  0x41}},		/* 0x52 */
+	{{0x87, 0x77, 0x77, 0x8b, 0x81, 0x0b, 0x68, 0xf0,
+	  0x5a, 0x80, 0x57, 0x57, 0x69, 0x00, 0x00, 0x02,
+	  0x01}},		/* 0x53 */
+	{{0xcd, 0x8f, 0x8f, 0x91, 0x9b, 0x1b, 0x7a, 0xff,
+	  0x64, 0x8c, 0x5f, 0x62, 0x7b, 0x10, 0x00, 0x07,
+	  0x41}}		/* 0x54 */
+};
+
+static const struct SiS_VCLKData SiSUSB_VCLKData[] = {
+	{0x1b, 0xe1, 25},	/* 0x00 */
+	{0x4e, 0xe4, 28},	/* 0x01 */
+	{0x57, 0xe4, 31},	/* 0x02 */
+	{0xc3, 0xc8, 36},	/* 0x03 */
+	{0x42, 0xe2, 40},	/* 0x04 */
+	{0xfe, 0xcd, 43},	/* 0x05 */
+	{0x5d, 0xc4, 44},	/* 0x06 */
+	{0x52, 0xe2, 49},	/* 0x07 */
+	{0x53, 0xe2, 50},	/* 0x08 */
+	{0x74, 0x67, 52},	/* 0x09 */
+	{0x6d, 0x66, 56},	/* 0x0a */
+	{0x5a, 0x64, 65},	/* 0x0b */
+	{0x46, 0x44, 67},	/* 0x0c */
+	{0xb1, 0x46, 68},	/* 0x0d */
+	{0xd3, 0x4a, 72},	/* 0x0e */
+	{0x29, 0x61, 75},	/* 0x0f */
+	{0x6e, 0x46, 76},	/* 0x10 */
+	{0x2b, 0x61, 78},	/* 0x11 */
+	{0x31, 0x42, 79},	/* 0x12 */
+	{0xab, 0x44, 83},	/* 0x13 */
+	{0x46, 0x25, 84},	/* 0x14 */
+	{0x78, 0x29, 86},	/* 0x15 */
+	{0x62, 0x44, 94},	/* 0x16 */
+	{0x2b, 0x41, 104},	/* 0x17 */
+	{0x3a, 0x23, 105},	/* 0x18 */
+	{0x70, 0x44, 108},	/* 0x19 */
+	{0x3c, 0x23, 109},	/* 0x1a */
+	{0x5e, 0x43, 113},	/* 0x1b */
+	{0xbc, 0x44, 116},	/* 0x1c */
+	{0xe0, 0x46, 132},	/* 0x1d */
+	{0x54, 0x42, 135},	/* 0x1e */
+	{0xea, 0x2a, 139},	/* 0x1f */
+	{0x41, 0x22, 157},	/* 0x20 */
+	{0x70, 0x24, 162},	/* 0x21 */
+	{0x30, 0x21, 175},	/* 0x22 */
+	{0x4e, 0x22, 189},	/* 0x23 */
+	{0xde, 0x26, 194},	/* 0x24 */
+	{0x62, 0x06, 202},	/* 0x25 */
+	{0x3f, 0x03, 229},	/* 0x26 */
+	{0xb8, 0x06, 234},	/* 0x27 */
+	{0x34, 0x02, 253},	/* 0x28 */
+	{0x58, 0x04, 255},	/* 0x29 */
+	{0x24, 0x01, 265},	/* 0x2a */
+	{0x9b, 0x02, 267},	/* 0x2b */
+	{0x70, 0x05, 270},	/* 0x2c */
+	{0x25, 0x01, 272},	/* 0x2d */
+	{0x9c, 0x02, 277},	/* 0x2e */
+	{0x27, 0x01, 286},	/* 0x2f */
+	{0x3c, 0x02, 291},	/* 0x30 */
+	{0xef, 0x0a, 292},	/* 0x31 */
+	{0xf6, 0x0a, 310},	/* 0x32 */
+	{0x95, 0x01, 315},	/* 0x33 */
+	{0xf0, 0x09, 324},	/* 0x34 */
+	{0xfe, 0x0a, 331},	/* 0x35 */
+	{0xf3, 0x09, 332},	/* 0x36 */
+	{0xea, 0x08, 340},	/* 0x37 */
+	{0xe8, 0x07, 376},	/* 0x38 */
+	{0xde, 0x06, 389},	/* 0x39 */
+	{0x52, 0x2a, 54},	/* 0x3a 301 TV */
+	{0x52, 0x6a, 27},	/* 0x3b 301 TV */
+	{0x62, 0x24, 70},	/* 0x3c 301 TV */
+	{0x62, 0x64, 70},	/* 0x3d 301 TV */
+	{0xa8, 0x4c, 30},	/* 0x3e 301 TV */
+	{0x20, 0x26, 33},	/* 0x3f 301 TV */
+	{0x31, 0xc2, 39},	/* 0x40 */
+	{0x60, 0x36, 30},	/* 0x41 Chrontel */
+	{0x40, 0x4a, 28},	/* 0x42 Chrontel */
+	{0x9f, 0x46, 44},	/* 0x43 Chrontel */
+	{0x97, 0x2c, 26},	/* 0x44 */
+	{0x44, 0xe4, 25},	/* 0x45 Chrontel */
+	{0x7e, 0x32, 47},	/* 0x46 Chrontel */
+	{0x8a, 0x24, 31},	/* 0x47 Chrontel */
+	{0x97, 0x2c, 26},	/* 0x48 Chrontel */
+	{0xce, 0x3c, 39},	/* 0x49 */
+	{0x52, 0x4a, 36},	/* 0x4a Chrontel */
+	{0x34, 0x61, 95},	/* 0x4b */
+	{0x78, 0x27, 108},	/* 0x4c - was 102 */
+	{0x66, 0x43, 123},	/* 0x4d Modes 0x26-0x28 (1400x1050) */
+	{0x41, 0x4e, 21},	/* 0x4e */
+	{0xa1, 0x4a, 29},	/* 0x4f Chrontel */
+	{0x19, 0x42, 42},	/* 0x50 */
+	{0x54, 0x46, 58},	/* 0x51 Chrontel */
+	{0x25, 0x42, 61},	/* 0x52 */
+	{0x44, 0x44, 66},	/* 0x53 Chrontel */
+	{0x3a, 0x62, 70},	/* 0x54 Chrontel */
+	{0x62, 0xc6, 34},	/* 0x55 848x480-60 */
+	{0x6a, 0xc6, 37},	/* 0x56 848x480-75 - TEMP */
+	{0xbf, 0xc8, 35},	/* 0x57 856x480-38i,60 */
+	{0x30, 0x23, 88},	/* 0x58 1360x768-62 (is 60Hz!) */
+	{0x52, 0x07, 149},	/* 0x59 1280x960-85 */
+	{0x56, 0x07, 156},	/* 0x5a 1400x1050-75 */
+	{0x70, 0x29, 81},	/* 0x5b 1280x768 LCD */
+	{0x45, 0x25, 83},	/* 0x5c 1280x800  */
+	{0x70, 0x0a, 147},	/* 0x5d 1680x1050 */
+	{0x70, 0x24, 162},	/* 0x5e 1600x1200 */
+	{0x5a, 0x64, 65},	/* 0x5f 1280x720 - temp */
+	{0x63, 0x46, 68},	/* 0x60 1280x768_2 */
+	{0x31, 0x42, 79},	/* 0x61 1280x768_3 - temp */
+	{0, 0, 0},		/* 0x62 - custom (will be filled out at run-time) */
+	{0x5a, 0x64, 65},	/* 0x63 1280x720 (LCD LVDS) */
+	{0x70, 0x28, 90},	/* 0x64 1152x864@60 */
+	{0x41, 0xc4, 32},	/* 0x65 848x480@60 */
+	{0x5c, 0xc6, 32},	/* 0x66 856x480@60 */
+	{0x76, 0xe7, 27},	/* 0x67 720x480@60 */
+	{0x5f, 0xc6, 33},	/* 0x68 720/768x576@60 */
+	{0x52, 0x27, 75},	/* 0x69 1920x1080i 60Hz interlaced */
+	{0x7c, 0x6b, 38},	/* 0x6a 960x540@60 */
+	{0xe3, 0x56, 41},	/* 0x6b 960x600@60 */
+	{0x45, 0x25, 83},	/* 0x6c 1280x800 */
+	{0x70, 0x28, 90},	/* 0x6d 1152x864@60 */
+	{0x15, 0xe1, 20},	/* 0x6e 640x400@60 (fake, not actually used) */
+	{0x5f, 0xc6, 33},	/* 0x6f 720x576@60 */
+	{0x37, 0x5a, 10},	/* 0x70 320x200@60 (fake, not actually used) */
+	{0x2b, 0xc2, 35}	/* 0x71 768@576@60 */
+};
+
+#endif
diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c
new file mode 100644
index 000000000..26baba3ab
--- /dev/null
+++ b/drivers/usb/misc/trancevibrator.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * PlayStation 2 Trance Vibrator driver
+ *
+ * Copyright (C) 2006 Sam Hocevar <sam@zoy.org>
+ */
+
+/* Standard include files */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#define DRIVER_AUTHOR "Sam Hocevar, sam@zoy.org"
+#define DRIVER_DESC "PlayStation 2 Trance Vibrator driver"
+
+#define TRANCEVIBRATOR_VENDOR_ID	0x0b49	/* ASCII Corporation */
+#define TRANCEVIBRATOR_PRODUCT_ID	0x064f	/* Trance Vibrator */
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(TRANCEVIBRATOR_VENDOR_ID, TRANCEVIBRATOR_PRODUCT_ID) },
+	{ },
+};
+MODULE_DEVICE_TABLE (usb, id_table);
+
+/* Driver-local specific stuff */
+struct trancevibrator {
+	struct usb_device *udev;
+	unsigned int speed;
+};
+
+static ssize_t speed_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct trancevibrator *tv = usb_get_intfdata(intf);
+
+	return sprintf(buf, "%d\n", tv->speed);
+}
+
+static ssize_t speed_store(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct trancevibrator *tv = usb_get_intfdata(intf);
+	int temp, retval, old;
+
+	retval = kstrtoint(buf, 10, &temp);
+	if (retval)
+		return retval;
+	if (temp > 255)
+		temp = 255;
+	else if (temp < 0)
+		temp = 0;
+	old = tv->speed;
+	tv->speed = temp;
+
+	dev_dbg(&tv->udev->dev, "speed = %d\n", tv->speed);
+
+	/* Set speed */
+	retval = usb_control_msg(tv->udev, usb_sndctrlpipe(tv->udev, 0),
+				 0x01, /* vendor request: set speed */
+				 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+				 tv->speed, /* speed value */
+				 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+	if (retval) {
+		tv->speed = old;
+		dev_dbg(&tv->udev->dev, "retval = %d\n", retval);
+		return retval;
+	}
+	return count;
+}
+static DEVICE_ATTR_RW(speed);
+
+static struct attribute *tv_attrs[] = {
+	&dev_attr_speed.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(tv);
+
+static int tv_probe(struct usb_interface *interface,
+		    const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct trancevibrator *dev;
+	int retval;
+
+	dev = kzalloc(sizeof(struct trancevibrator), GFP_KERNEL);
+	if (!dev) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	dev->udev = usb_get_dev(udev);
+	usb_set_intfdata(interface, dev);
+
+	return 0;
+
+error:
+	kfree(dev);
+	return retval;
+}
+
+static void tv_disconnect(struct usb_interface *interface)
+{
+	struct trancevibrator *dev;
+
+	dev = usb_get_intfdata (interface);
+	usb_set_intfdata(interface, NULL);
+	usb_put_dev(dev->udev);
+	kfree(dev);
+}
+
+/* USB subsystem object */
+static struct usb_driver tv_driver = {
+	.name =		"trancevibrator",
+	.probe =	tv_probe,
+	.disconnect =	tv_disconnect,
+	.id_table =	id_table,
+	.dev_groups =	tv_groups,
+};
+
+module_usb_driver(tv_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
new file mode 100644
index 000000000..54337d72b
--- /dev/null
+++ b/drivers/usb/misc/usb251xb.c
@@ -0,0 +1,769 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Microchip USB251xB USB 2.0 Hi-Speed Hub Controller
+ * Configuration via SMBus.
+ *
+ * Copyright (c) 2017 SKIDATA AG
+ *
+ * This work is based on the USB3503 driver by Dongjin Kim and
+ * a not-accepted patch by Fabien Lahoudere, see:
+ * https://patchwork.kernel.org/patch/9257715/
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/nls.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+/* Internal Register Set Addresses & Default Values acc. to DS00001692C */
+#define USB251XB_ADDR_VENDOR_ID_LSB	0x00
+#define USB251XB_ADDR_VENDOR_ID_MSB	0x01
+#define USB251XB_DEF_VENDOR_ID		0x0424
+
+#define USB251XB_ADDR_PRODUCT_ID_LSB	0x02
+#define USB251XB_ADDR_PRODUCT_ID_MSB	0x03
+
+#define USB251XB_ADDR_DEVICE_ID_LSB	0x04
+#define USB251XB_ADDR_DEVICE_ID_MSB	0x05
+#define USB251XB_DEF_DEVICE_ID		0x0BB3
+
+#define USB251XB_ADDR_CONFIG_DATA_1	0x06
+#define USB251XB_DEF_CONFIG_DATA_1	0x9B
+#define USB251XB_ADDR_CONFIG_DATA_2	0x07
+#define USB251XB_DEF_CONFIG_DATA_2	0x20
+#define USB251XB_ADDR_CONFIG_DATA_3	0x08
+#define USB251XB_DEF_CONFIG_DATA_3	0x02
+
+#define USB251XB_ADDR_NON_REMOVABLE_DEVICES	0x09
+#define USB251XB_DEF_NON_REMOVABLE_DEVICES	0x00
+
+#define USB251XB_ADDR_PORT_DISABLE_SELF	0x0A
+#define USB251XB_DEF_PORT_DISABLE_SELF	0x00
+#define USB251XB_ADDR_PORT_DISABLE_BUS	0x0B
+#define USB251XB_DEF_PORT_DISABLE_BUS	0x00
+
+#define USB251XB_ADDR_MAX_POWER_SELF	0x0C
+#define USB251XB_DEF_MAX_POWER_SELF	0x01
+#define USB251XB_ADDR_MAX_POWER_BUS	0x0D
+#define USB251XB_DEF_MAX_POWER_BUS	0x32
+
+#define USB251XB_ADDR_MAX_CURRENT_SELF	0x0E
+#define USB251XB_DEF_MAX_CURRENT_SELF	0x01
+#define USB251XB_ADDR_MAX_CURRENT_BUS	0x0F
+#define USB251XB_DEF_MAX_CURRENT_BUS	0x32
+
+#define USB251XB_ADDR_POWER_ON_TIME	0x10
+#define USB251XB_DEF_POWER_ON_TIME	0x32
+
+#define USB251XB_ADDR_LANGUAGE_ID_HIGH	0x11
+#define USB251XB_ADDR_LANGUAGE_ID_LOW	0x12
+#define USB251XB_DEF_LANGUAGE_ID	0x0000
+
+#define USB251XB_STRING_BUFSIZE			62
+#define USB251XB_ADDR_MANUFACTURER_STRING_LEN	0x13
+#define USB251XB_ADDR_MANUFACTURER_STRING	0x16
+#define USB251XB_DEF_MANUFACTURER_STRING	"Microchip"
+
+#define USB251XB_ADDR_PRODUCT_STRING_LEN	0x14
+#define USB251XB_ADDR_PRODUCT_STRING		0x54
+
+#define USB251XB_ADDR_SERIAL_STRING_LEN		0x15
+#define USB251XB_ADDR_SERIAL_STRING		0x92
+#define USB251XB_DEF_SERIAL_STRING		""
+
+#define USB251XB_ADDR_BATTERY_CHARGING_ENABLE	0xD0
+#define USB251XB_DEF_BATTERY_CHARGING_ENABLE	0x00
+
+#define USB251XB_ADDR_BOOST_UP	0xF6
+#define USB251XB_DEF_BOOST_UP	0x00
+#define USB251XB_ADDR_BOOST_57	0xF7
+#define USB251XB_DEF_BOOST_57	0x00
+#define USB251XB_ADDR_BOOST_14	0xF8
+#define USB251XB_DEF_BOOST_14	0x00
+
+#define USB251XB_ADDR_PORT_SWAP	0xFA
+#define USB251XB_DEF_PORT_SWAP	0x00
+
+#define USB251XB_ADDR_PORT_MAP_12	0xFB
+#define USB251XB_DEF_PORT_MAP_12	0x00
+#define USB251XB_ADDR_PORT_MAP_34	0xFC
+#define USB251XB_DEF_PORT_MAP_34	0x00 /* USB251{3B/i,4B/i,7/i} only */
+#define USB251XB_ADDR_PORT_MAP_56	0xFD
+#define USB251XB_DEF_PORT_MAP_56	0x00 /* USB2517/i only */
+#define USB251XB_ADDR_PORT_MAP_7	0xFE
+#define USB251XB_DEF_PORT_MAP_7		0x00 /* USB2517/i only */
+
+#define USB251XB_ADDR_STATUS_COMMAND		0xFF
+#define USB251XB_STATUS_COMMAND_SMBUS_DOWN	0x04
+#define USB251XB_STATUS_COMMAND_RESET		0x02
+#define USB251XB_STATUS_COMMAND_ATTACH		0x01
+
+#define USB251XB_I2C_REG_SZ	0x100
+#define USB251XB_I2C_WRITE_SZ	0x10
+
+#define DRIVER_NAME	"usb251xb"
+#define DRIVER_DESC	"Microchip USB 2.0 Hi-Speed Hub Controller"
+
+struct usb251xb {
+	struct device *dev;
+	struct i2c_client *i2c;
+	struct regulator *vdd;
+	u8 skip_config;
+	struct gpio_desc *gpio_reset;
+	u16 vendor_id;
+	u16 product_id;
+	u16 device_id;
+	u8  conf_data1;
+	u8  conf_data2;
+	u8  conf_data3;
+	u8  non_rem_dev;
+	u8  port_disable_sp;
+	u8  port_disable_bp;
+	u8  max_power_sp;
+	u8  max_power_bp;
+	u8  max_current_sp;
+	u8  max_current_bp;
+	u8  power_on_time;
+	u16 lang_id;
+	u8 manufacturer_len;
+	u8 product_len;
+	u8 serial_len;
+	char manufacturer[USB251XB_STRING_BUFSIZE];
+	char product[USB251XB_STRING_BUFSIZE];
+	char serial[USB251XB_STRING_BUFSIZE];
+	u8  bat_charge_en;
+	u8  boost_up;
+	u8  boost_57;
+	u8  boost_14;
+	u8  port_swap;
+	u8  port_map12;
+	u8  port_map34;
+	u8  port_map56;
+	u8  port_map7;
+	u8  status;
+};
+
+struct usb251xb_data {
+	u16 product_id;
+	u8 port_cnt;
+	bool led_support;
+	bool bat_support;
+	char product_str[USB251XB_STRING_BUFSIZE / 2]; /* ASCII string */
+};
+
+static const struct usb251xb_data usb2422_data = {
+	.product_id = 0x2422,
+	.port_cnt = 2,
+	.led_support = false,
+	.bat_support = true,
+	.product_str = "USB2422",
+};
+
+static const struct usb251xb_data usb2512b_data = {
+	.product_id = 0x2512,
+	.port_cnt = 2,
+	.led_support = false,
+	.bat_support = true,
+	.product_str = "USB2512B",
+};
+
+static const struct usb251xb_data usb2512bi_data = {
+	.product_id = 0x2512,
+	.port_cnt = 2,
+	.led_support = false,
+	.bat_support = true,
+	.product_str = "USB2512Bi",
+};
+
+static const struct usb251xb_data usb2513b_data = {
+	.product_id = 0x2513,
+	.port_cnt = 3,
+	.led_support = false,
+	.bat_support = true,
+	.product_str = "USB2513B",
+};
+
+static const struct usb251xb_data usb2513bi_data = {
+	.product_id = 0x2513,
+	.port_cnt = 3,
+	.led_support = false,
+	.bat_support = true,
+	.product_str = "USB2513Bi",
+};
+
+static const struct usb251xb_data usb2514b_data = {
+	.product_id = 0x2514,
+	.port_cnt = 4,
+	.led_support = false,
+	.bat_support = true,
+	.product_str = "USB2514B",
+};
+
+static const struct usb251xb_data usb2514bi_data = {
+	.product_id = 0x2514,
+	.port_cnt = 4,
+	.led_support = false,
+	.bat_support = true,
+	.product_str = "USB2514Bi",
+};
+
+static const struct usb251xb_data usb2517_data = {
+	.product_id = 0x2517,
+	.port_cnt = 7,
+	.led_support = true,
+	.bat_support = false,
+	.product_str = "USB2517",
+};
+
+static const struct usb251xb_data usb2517i_data = {
+	.product_id = 0x2517,
+	.port_cnt = 7,
+	.led_support = true,
+	.bat_support = false,
+	.product_str = "USB2517i",
+};
+
+#ifdef CONFIG_GPIOLIB
+static int usb251xb_check_dev_children(struct device *dev, void *child)
+{
+	if (dev->type == &i2c_adapter_type) {
+		return device_for_each_child(dev, child,
+					     usb251xb_check_dev_children);
+	}
+
+	return (dev == child);
+}
+
+static int usb251x_check_gpio_chip(struct usb251xb *hub)
+{
+	struct gpio_chip *gc = gpiod_to_chip(hub->gpio_reset);
+	struct i2c_adapter *adap = hub->i2c->adapter;
+	int ret;
+
+	if (!hub->gpio_reset)
+		return 0;
+
+	if (!gc)
+		return -EINVAL;
+
+	ret = usb251xb_check_dev_children(&adap->dev, gc->parent);
+	if (ret) {
+		dev_err(hub->dev, "Reset GPIO chip is at the same i2c-bus\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+#else
+static int usb251x_check_gpio_chip(struct usb251xb *hub)
+{
+	return 0;
+}
+#endif
+
+static void usb251xb_reset(struct usb251xb *hub)
+{
+	if (!hub->gpio_reset)
+		return;
+
+	i2c_lock_bus(hub->i2c->adapter, I2C_LOCK_SEGMENT);
+
+	gpiod_set_value_cansleep(hub->gpio_reset, 1);
+	usleep_range(1, 10);	/* >=1us RESET_N asserted */
+	gpiod_set_value_cansleep(hub->gpio_reset, 0);
+
+	/* wait for hub recovery/stabilization */
+	usleep_range(500, 750);	/* >=500us after RESET_N deasserted */
+
+	i2c_unlock_bus(hub->i2c->adapter, I2C_LOCK_SEGMENT);
+}
+
+static int usb251xb_connect(struct usb251xb *hub)
+{
+	struct device *dev = hub->dev;
+	int err, i;
+	char i2c_wb[USB251XB_I2C_REG_SZ];
+
+	memset(i2c_wb, 0, USB251XB_I2C_REG_SZ);
+
+	if (hub->skip_config) {
+		dev_info(dev, "Skip hub configuration, only attach.\n");
+		i2c_wb[0] = 0x01;
+		i2c_wb[1] = USB251XB_STATUS_COMMAND_ATTACH;
+
+		usb251xb_reset(hub);
+
+		err = i2c_smbus_write_i2c_block_data(hub->i2c,
+				USB251XB_ADDR_STATUS_COMMAND, 2, i2c_wb);
+		if (err) {
+			dev_err(dev, "attaching hub failed: %d\n", err);
+			return err;
+		}
+		return 0;
+	}
+
+	i2c_wb[USB251XB_ADDR_VENDOR_ID_MSB]     = (hub->vendor_id >> 8) & 0xFF;
+	i2c_wb[USB251XB_ADDR_VENDOR_ID_LSB]     = hub->vendor_id & 0xFF;
+	i2c_wb[USB251XB_ADDR_PRODUCT_ID_MSB]    = (hub->product_id >> 8) & 0xFF;
+	i2c_wb[USB251XB_ADDR_PRODUCT_ID_LSB]    = hub->product_id & 0xFF;
+	i2c_wb[USB251XB_ADDR_DEVICE_ID_MSB]     = (hub->device_id >> 8) & 0xFF;
+	i2c_wb[USB251XB_ADDR_DEVICE_ID_LSB]     = hub->device_id & 0xFF;
+	i2c_wb[USB251XB_ADDR_CONFIG_DATA_1]     = hub->conf_data1;
+	i2c_wb[USB251XB_ADDR_CONFIG_DATA_2]     = hub->conf_data2;
+	i2c_wb[USB251XB_ADDR_CONFIG_DATA_3]     = hub->conf_data3;
+	i2c_wb[USB251XB_ADDR_NON_REMOVABLE_DEVICES] = hub->non_rem_dev;
+	i2c_wb[USB251XB_ADDR_PORT_DISABLE_SELF] = hub->port_disable_sp;
+	i2c_wb[USB251XB_ADDR_PORT_DISABLE_BUS]  = hub->port_disable_bp;
+	i2c_wb[USB251XB_ADDR_MAX_POWER_SELF]    = hub->max_power_sp;
+	i2c_wb[USB251XB_ADDR_MAX_POWER_BUS]     = hub->max_power_bp;
+	i2c_wb[USB251XB_ADDR_MAX_CURRENT_SELF]  = hub->max_current_sp;
+	i2c_wb[USB251XB_ADDR_MAX_CURRENT_BUS]   = hub->max_current_bp;
+	i2c_wb[USB251XB_ADDR_POWER_ON_TIME]     = hub->power_on_time;
+	i2c_wb[USB251XB_ADDR_LANGUAGE_ID_HIGH]  = (hub->lang_id >> 8) & 0xFF;
+	i2c_wb[USB251XB_ADDR_LANGUAGE_ID_LOW]   = hub->lang_id & 0xFF;
+	i2c_wb[USB251XB_ADDR_MANUFACTURER_STRING_LEN] = hub->manufacturer_len;
+	i2c_wb[USB251XB_ADDR_PRODUCT_STRING_LEN]      = hub->product_len;
+	i2c_wb[USB251XB_ADDR_SERIAL_STRING_LEN]       = hub->serial_len;
+	memcpy(&i2c_wb[USB251XB_ADDR_MANUFACTURER_STRING], hub->manufacturer,
+	       USB251XB_STRING_BUFSIZE);
+	memcpy(&i2c_wb[USB251XB_ADDR_SERIAL_STRING], hub->serial,
+	       USB251XB_STRING_BUFSIZE);
+	memcpy(&i2c_wb[USB251XB_ADDR_PRODUCT_STRING], hub->product,
+	       USB251XB_STRING_BUFSIZE);
+	i2c_wb[USB251XB_ADDR_BATTERY_CHARGING_ENABLE] = hub->bat_charge_en;
+	i2c_wb[USB251XB_ADDR_BOOST_UP]          = hub->boost_up;
+	i2c_wb[USB251XB_ADDR_BOOST_57]          = hub->boost_57;
+	i2c_wb[USB251XB_ADDR_BOOST_14]          = hub->boost_14;
+	i2c_wb[USB251XB_ADDR_PORT_SWAP]         = hub->port_swap;
+	i2c_wb[USB251XB_ADDR_PORT_MAP_12]       = hub->port_map12;
+	i2c_wb[USB251XB_ADDR_PORT_MAP_34]       = hub->port_map34;
+	i2c_wb[USB251XB_ADDR_PORT_MAP_56]       = hub->port_map56;
+	i2c_wb[USB251XB_ADDR_PORT_MAP_7]        = hub->port_map7;
+	i2c_wb[USB251XB_ADDR_STATUS_COMMAND] = USB251XB_STATUS_COMMAND_ATTACH;
+
+	usb251xb_reset(hub);
+
+	/* write registers */
+	for (i = 0; i < (USB251XB_I2C_REG_SZ / USB251XB_I2C_WRITE_SZ); i++) {
+		int offset = i * USB251XB_I2C_WRITE_SZ;
+		char wbuf[USB251XB_I2C_WRITE_SZ + 1];
+
+		/* The first data byte transferred tells the hub how many data
+		 * bytes will follow (byte count).
+		 */
+		wbuf[0] = USB251XB_I2C_WRITE_SZ;
+		memcpy(&wbuf[1], &i2c_wb[offset], USB251XB_I2C_WRITE_SZ);
+
+		dev_dbg(dev, "writing %d byte block %d to 0x%02X\n",
+			USB251XB_I2C_WRITE_SZ, i, offset);
+
+		err = i2c_smbus_write_i2c_block_data(hub->i2c, offset,
+						     USB251XB_I2C_WRITE_SZ + 1,
+						     wbuf);
+		if (err)
+			goto out_err;
+	}
+
+	dev_info(dev, "Hub configuration was successful.\n");
+	return 0;
+
+out_err:
+	dev_err(dev, "configuring block %d failed: %d\n", i, err);
+	return err;
+}
+
+#ifdef CONFIG_OF
+static void usb251xb_get_ports_field(struct usb251xb *hub,
+				    const char *prop_name, u8 port_cnt,
+				    bool ds_only, u8 *fld)
+{
+	struct device *dev = hub->dev;
+	struct property *prop;
+	const __be32 *p;
+	u32 port;
+
+	of_property_for_each_u32(dev->of_node, prop_name, prop, p, port) {
+		if ((port >= ds_only ? 1 : 0) && (port <= port_cnt))
+			*fld |= BIT(port);
+		else
+			dev_warn(dev, "port %u doesn't exist\n", port);
+	}
+}
+
+static int usb251xb_get_ofdata(struct usb251xb *hub,
+			       const struct usb251xb_data *data)
+{
+	struct device *dev = hub->dev;
+	struct device_node *np = dev->of_node;
+	int len;
+	u32 property_u32 = 0;
+	const char *cproperty_char;
+	char str[USB251XB_STRING_BUFSIZE / 2];
+
+	if (!np) {
+		dev_err(dev, "failed to get ofdata\n");
+		return -ENODEV;
+	}
+
+	if (of_get_property(np, "skip-config", NULL))
+		hub->skip_config = 1;
+	else
+		hub->skip_config = 0;
+
+	hub->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(hub->gpio_reset))
+		return dev_err_probe(dev, PTR_ERR(hub->gpio_reset),
+				     "unable to request GPIO reset pin\n");
+
+	if (of_property_read_u16_array(np, "vendor-id", &hub->vendor_id, 1))
+		hub->vendor_id = USB251XB_DEF_VENDOR_ID;
+
+	if (of_property_read_u16_array(np, "product-id",
+				       &hub->product_id, 1))
+		hub->product_id = data->product_id;
+
+	if (of_property_read_u16_array(np, "device-id", &hub->device_id, 1))
+		hub->device_id = USB251XB_DEF_DEVICE_ID;
+
+	hub->conf_data1 = USB251XB_DEF_CONFIG_DATA_1;
+	if (of_get_property(np, "self-powered", NULL)) {
+		hub->conf_data1 |= BIT(7);
+
+		/* Configure Over-Current sens when self-powered */
+		hub->conf_data1 &= ~BIT(2);
+		if (of_get_property(np, "ganged-sensing", NULL))
+			hub->conf_data1 &= ~BIT(1);
+		else if (of_get_property(np, "individual-sensing", NULL))
+			hub->conf_data1 |= BIT(1);
+	} else if (of_get_property(np, "bus-powered", NULL)) {
+		hub->conf_data1 &= ~BIT(7);
+
+		/* Disable Over-Current sense when bus-powered */
+		hub->conf_data1 |= BIT(2);
+	}
+
+	if (of_get_property(np, "disable-hi-speed", NULL))
+		hub->conf_data1 |= BIT(5);
+
+	if (of_get_property(np, "multi-tt", NULL))
+		hub->conf_data1 |= BIT(4);
+	else if (of_get_property(np, "single-tt", NULL))
+		hub->conf_data1 &= ~BIT(4);
+
+	if (of_get_property(np, "disable-eop", NULL))
+		hub->conf_data1 |= BIT(3);
+
+	if (of_get_property(np, "individual-port-switching", NULL))
+		hub->conf_data1 |= BIT(0);
+	else if (of_get_property(np, "ganged-port-switching", NULL))
+		hub->conf_data1 &= ~BIT(0);
+
+	hub->conf_data2 = USB251XB_DEF_CONFIG_DATA_2;
+	if (of_get_property(np, "dynamic-power-switching", NULL))
+		hub->conf_data2 |= BIT(7);
+
+	if (!of_property_read_u32(np, "oc-delay-us", &property_u32)) {
+		if (property_u32 == 100) {
+			/* 100 us*/
+			hub->conf_data2 &= ~BIT(5);
+			hub->conf_data2 &= ~BIT(4);
+		} else if (property_u32 == 4000) {
+			/* 4 ms */
+			hub->conf_data2 &= ~BIT(5);
+			hub->conf_data2 |= BIT(4);
+		} else if (property_u32 == 16000) {
+			/* 16 ms */
+			hub->conf_data2 |= BIT(5);
+			hub->conf_data2 |= BIT(4);
+		} else {
+			/* 8 ms (DEFAULT) */
+			hub->conf_data2 |= BIT(5);
+			hub->conf_data2 &= ~BIT(4);
+		}
+	}
+
+	if (of_get_property(np, "compound-device", NULL))
+		hub->conf_data2 |= BIT(3);
+
+	hub->conf_data3 = USB251XB_DEF_CONFIG_DATA_3;
+	if (of_get_property(np, "port-mapping-mode", NULL))
+		hub->conf_data3 |= BIT(3);
+
+	if (data->led_support && of_get_property(np, "led-usb-mode", NULL))
+		hub->conf_data3 &= ~BIT(1);
+
+	if (of_get_property(np, "string-support", NULL))
+		hub->conf_data3 |= BIT(0);
+
+	hub->non_rem_dev = USB251XB_DEF_NON_REMOVABLE_DEVICES;
+	usb251xb_get_ports_field(hub, "non-removable-ports", data->port_cnt,
+				 true, &hub->non_rem_dev);
+
+	hub->port_disable_sp = USB251XB_DEF_PORT_DISABLE_SELF;
+	usb251xb_get_ports_field(hub, "sp-disabled-ports", data->port_cnt,
+				 true, &hub->port_disable_sp);
+
+	hub->port_disable_bp = USB251XB_DEF_PORT_DISABLE_BUS;
+	usb251xb_get_ports_field(hub, "bp-disabled-ports", data->port_cnt,
+				 true, &hub->port_disable_bp);
+
+	hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF;
+	if (!of_property_read_u32(np, "sp-max-total-current-microamp",
+	    &property_u32))
+		hub->max_power_sp = min_t(u8, property_u32 / 2000, 50);
+
+	hub->max_power_bp = USB251XB_DEF_MAX_POWER_BUS;
+	if (!of_property_read_u32(np, "bp-max-total-current-microamp",
+	    &property_u32))
+		hub->max_power_bp = min_t(u8, property_u32 / 2000, 255);
+
+	hub->max_current_sp = USB251XB_DEF_MAX_CURRENT_SELF;
+	if (!of_property_read_u32(np, "sp-max-removable-current-microamp",
+	    &property_u32))
+		hub->max_current_sp = min_t(u8, property_u32 / 2000, 50);
+
+	hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS;
+	if (!of_property_read_u32(np, "bp-max-removable-current-microamp",
+	    &property_u32))
+		hub->max_current_bp = min_t(u8, property_u32 / 2000, 255);
+
+	hub->power_on_time = USB251XB_DEF_POWER_ON_TIME;
+	if (!of_property_read_u32(np, "power-on-time-ms", &property_u32))
+		hub->power_on_time = min_t(u8, property_u32 / 2, 255);
+
+	if (of_property_read_u16_array(np, "language-id", &hub->lang_id, 1))
+		hub->lang_id = USB251XB_DEF_LANGUAGE_ID;
+
+	if (of_property_read_u8(np, "boost-up", &hub->boost_up))
+		hub->boost_up = USB251XB_DEF_BOOST_UP;
+
+	cproperty_char = of_get_property(np, "manufacturer", NULL);
+	strscpy(str, cproperty_char ? : USB251XB_DEF_MANUFACTURER_STRING,
+		sizeof(str));
+	hub->manufacturer_len = strlen(str) & 0xFF;
+	memset(hub->manufacturer, 0, USB251XB_STRING_BUFSIZE);
+	len = min_t(size_t, USB251XB_STRING_BUFSIZE / 2, strlen(str));
+	len = utf8s_to_utf16s(str, len, UTF16_LITTLE_ENDIAN,
+			      (wchar_t *)hub->manufacturer,
+			      USB251XB_STRING_BUFSIZE);
+
+	cproperty_char = of_get_property(np, "product", NULL);
+	strscpy(str, cproperty_char ? : data->product_str, sizeof(str));
+	hub->product_len = strlen(str) & 0xFF;
+	memset(hub->product, 0, USB251XB_STRING_BUFSIZE);
+	len = min_t(size_t, USB251XB_STRING_BUFSIZE / 2, strlen(str));
+	len = utf8s_to_utf16s(str, len, UTF16_LITTLE_ENDIAN,
+			      (wchar_t *)hub->product,
+			      USB251XB_STRING_BUFSIZE);
+
+	cproperty_char = of_get_property(np, "serial", NULL);
+	strscpy(str, cproperty_char ? : USB251XB_DEF_SERIAL_STRING,
+		sizeof(str));
+	hub->serial_len = strlen(str) & 0xFF;
+	memset(hub->serial, 0, USB251XB_STRING_BUFSIZE);
+	len = min_t(size_t, USB251XB_STRING_BUFSIZE / 2, strlen(str));
+	len = utf8s_to_utf16s(str, len, UTF16_LITTLE_ENDIAN,
+			      (wchar_t *)hub->serial,
+			      USB251XB_STRING_BUFSIZE);
+
+	/*
+	 * The datasheet documents the register as 'Port Swap' but in real the
+	 * register controls the USB DP/DM signal swapping for each port.
+	 */
+	hub->port_swap = USB251XB_DEF_PORT_SWAP;
+	usb251xb_get_ports_field(hub, "swap-dx-lanes", data->port_cnt,
+				 false, &hub->port_swap);
+
+	/* The following parameters are currently not exposed to devicetree, but
+	 * may be as soon as needed.
+	 */
+	hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE;
+	hub->boost_57 = USB251XB_DEF_BOOST_57;
+	hub->boost_14 = USB251XB_DEF_BOOST_14;
+	hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
+	hub->port_map34 = USB251XB_DEF_PORT_MAP_34;
+	hub->port_map56 = USB251XB_DEF_PORT_MAP_56;
+	hub->port_map7  = USB251XB_DEF_PORT_MAP_7;
+
+	return 0;
+}
+
+static const struct of_device_id usb251xb_of_match[] = {
+	{
+		.compatible = "microchip,usb2422",
+		.data = &usb2422_data,
+	}, {
+		.compatible = "microchip,usb2512b",
+		.data = &usb2512b_data,
+	}, {
+		.compatible = "microchip,usb2512bi",
+		.data = &usb2512bi_data,
+	}, {
+		.compatible = "microchip,usb2513b",
+		.data = &usb2513b_data,
+	}, {
+		.compatible = "microchip,usb2513bi",
+		.data = &usb2513bi_data,
+	}, {
+		.compatible = "microchip,usb2514b",
+		.data = &usb2514b_data,
+	}, {
+		.compatible = "microchip,usb2514bi",
+		.data = &usb2514bi_data,
+	}, {
+		.compatible = "microchip,usb2517",
+		.data = &usb2517_data,
+	}, {
+		.compatible = "microchip,usb2517i",
+		.data = &usb2517i_data,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, usb251xb_of_match);
+#else /* CONFIG_OF */
+static int usb251xb_get_ofdata(struct usb251xb *hub,
+			       const struct usb251xb_data *data)
+{
+	return 0;
+}
+#endif /* CONFIG_OF */
+
+static void usb251xb_regulator_disable_action(void *data)
+{
+	struct usb251xb *hub = data;
+
+	regulator_disable(hub->vdd);
+}
+
+static int usb251xb_probe(struct usb251xb *hub)
+{
+	struct device *dev = hub->dev;
+	struct device_node *np = dev->of_node;
+	const struct usb251xb_data *usb_data = of_device_get_match_data(dev);
+	int err;
+
+	if (np && usb_data) {
+		err = usb251xb_get_ofdata(hub, usb_data);
+		if (err) {
+			dev_err(dev, "failed to get ofdata: %d\n", err);
+			return err;
+		}
+	}
+
+	/*
+	 * usb251x SMBus-slave SCL lane is muxed with CFG_SEL0 pin. So if anyone
+	 * tries to work with the bus at the moment the hub reset is released,
+	 * it may cause an invalid config being latched by usb251x. Particularly
+	 * one of the config modes makes the hub loading a default registers
+	 * value without SMBus-slave interface activation. If the hub
+	 * accidentally gets this mode, this will cause the driver SMBus-
+	 * functions failure. Normally we could just lock the SMBus-segment the
+	 * hub i2c-interface resides for the device-specific reset timing. But
+	 * the GPIO controller, which is used to handle the hub reset, might be
+	 * placed at the same i2c-bus segment. In this case an error should be
+	 * returned since we can't safely use the GPIO controller to clear the
+	 * reset state (it may affect the hub configuration) and we can't lock
+	 * the i2c-bus segment (it will cause a deadlock).
+	 */
+	err = usb251x_check_gpio_chip(hub);
+	if (err)
+		return err;
+
+	hub->vdd = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(hub->vdd))
+		return PTR_ERR(hub->vdd);
+
+	err = regulator_enable(hub->vdd);
+	if (err)
+		return err;
+
+	err = devm_add_action_or_reset(dev,
+				       usb251xb_regulator_disable_action, hub);
+	if (err)
+		return err;
+
+	err = usb251xb_connect(hub);
+	if (err) {
+		dev_err(dev, "Failed to connect hub (%d)\n", err);
+		return err;
+	}
+
+	dev_info(dev, "Hub probed successfully\n");
+
+	return 0;
+}
+
+static int usb251xb_i2c_probe(struct i2c_client *i2c,
+			      const struct i2c_device_id *id)
+{
+	struct usb251xb *hub;
+
+	hub = devm_kzalloc(&i2c->dev, sizeof(struct usb251xb), GFP_KERNEL);
+	if (!hub)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, hub);
+	hub->dev = &i2c->dev;
+	hub->i2c = i2c;
+
+	return usb251xb_probe(hub);
+}
+
+static int __maybe_unused usb251xb_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct usb251xb *hub = i2c_get_clientdata(client);
+
+	return regulator_disable(hub->vdd);
+}
+
+static int __maybe_unused usb251xb_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct usb251xb *hub = i2c_get_clientdata(client);
+	int err;
+
+	err = regulator_enable(hub->vdd);
+	if (err)
+		return err;
+
+	return usb251xb_connect(hub);
+}
+
+static SIMPLE_DEV_PM_OPS(usb251xb_pm_ops, usb251xb_suspend, usb251xb_resume);
+
+static const struct i2c_device_id usb251xb_id[] = {
+	{ "usb2422", 0 },
+	{ "usb2512b", 0 },
+	{ "usb2512bi", 0 },
+	{ "usb2513b", 0 },
+	{ "usb2513bi", 0 },
+	{ "usb2514b", 0 },
+	{ "usb2514bi", 0 },
+	{ "usb2517", 0 },
+	{ "usb2517i", 0 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, usb251xb_id);
+
+static struct i2c_driver usb251xb_i2c_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = of_match_ptr(usb251xb_of_match),
+		.pm = &usb251xb_pm_ops,
+	},
+	.probe    = usb251xb_i2c_probe,
+	.id_table = usb251xb_id,
+};
+
+module_i2c_driver(usb251xb_i2c_driver);
+
+MODULE_AUTHOR("Richard Leitner <richard.leitner@skidata.com>");
+MODULE_DESCRIPTION("USB251x/xBi USB 2.0 Hub Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
new file mode 100644
index 000000000..c70ca475c
--- /dev/null
+++ b/drivers/usb/misc/usb3503.c
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for SMSC USB3503 USB 2.0 hub controller driver
+ *
+ * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
+ */
+
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb3503.h>
+#include <linux/regmap.h>
+
+#define USB3503_VIDL		0x00
+#define USB3503_VIDM		0x01
+#define USB3503_PIDL		0x02
+#define USB3503_PIDM		0x03
+#define USB3503_DIDL		0x04
+#define USB3503_DIDM		0x05
+
+#define USB3503_CFG1		0x06
+#define USB3503_SELF_BUS_PWR	(1 << 7)
+
+#define USB3503_CFG2		0x07
+#define USB3503_CFG3		0x08
+#define USB3503_NRD		0x09
+
+#define USB3503_PDS		0x0a
+
+#define USB3503_SP_ILOCK	0xe7
+#define USB3503_SPILOCK_CONNECT	(1 << 1)
+#define USB3503_SPILOCK_CONFIG	(1 << 0)
+
+#define USB3503_CFGP		0xee
+#define USB3503_CLKSUSP		(1 << 7)
+
+#define USB3503_RESET		0xff
+
+struct usb3503 {
+	enum usb3503_mode	mode;
+	struct regmap		*regmap;
+	struct device		*dev;
+	struct clk		*clk;
+	u8	port_off_mask;
+	struct gpio_desc	*intn;
+	struct gpio_desc 	*reset;
+	struct gpio_desc 	*connect;
+	bool	secondary_ref_clk;
+};
+
+static int usb3503_reset(struct usb3503 *hub, int state)
+{
+	if (!state && hub->connect)
+		gpiod_set_value_cansleep(hub->connect, 0);
+
+	if (hub->reset)
+		gpiod_set_value_cansleep(hub->reset, !state);
+
+	/* Wait T_HUBINIT == 4ms for hub logic to stabilize */
+	if (state)
+		usleep_range(4000, 10000);
+
+	return 0;
+}
+
+static int usb3503_connect(struct usb3503 *hub)
+{
+	struct device *dev = hub->dev;
+	int err;
+
+	usb3503_reset(hub, 1);
+
+	if (hub->regmap) {
+		/* SP_ILOCK: set connect_n, config_n for config */
+		err = regmap_write(hub->regmap, USB3503_SP_ILOCK,
+			   (USB3503_SPILOCK_CONNECT
+				 | USB3503_SPILOCK_CONFIG));
+		if (err < 0) {
+			dev_err(dev, "SP_ILOCK failed (%d)\n", err);
+			return err;
+		}
+
+		/* PDS : Set the ports which are disabled in self-powered mode. */
+		if (hub->port_off_mask) {
+			err = regmap_update_bits(hub->regmap, USB3503_PDS,
+					hub->port_off_mask,
+					hub->port_off_mask);
+			if (err < 0) {
+				dev_err(dev, "PDS failed (%d)\n", err);
+				return err;
+			}
+		}
+
+		/* CFG1 : Set SELF_BUS_PWR, this enables self-powered operation. */
+		err = regmap_update_bits(hub->regmap, USB3503_CFG1,
+					 USB3503_SELF_BUS_PWR,
+					 USB3503_SELF_BUS_PWR);
+		if (err < 0) {
+			dev_err(dev, "CFG1 failed (%d)\n", err);
+			return err;
+		}
+
+		/* SP_LOCK: clear connect_n, config_n for hub connect */
+		err = regmap_update_bits(hub->regmap, USB3503_SP_ILOCK,
+					 (USB3503_SPILOCK_CONNECT
+					  | USB3503_SPILOCK_CONFIG), 0);
+		if (err < 0) {
+			dev_err(dev, "SP_ILOCK failed (%d)\n", err);
+			return err;
+		}
+	}
+
+	if (hub->connect)
+		gpiod_set_value_cansleep(hub->connect, 1);
+
+	hub->mode = USB3503_MODE_HUB;
+	dev_info(dev, "switched to HUB mode\n");
+
+	return 0;
+}
+
+static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
+{
+	struct device *dev = hub->dev;
+	int err = 0;
+
+	switch (mode) {
+	case USB3503_MODE_HUB:
+		err = usb3503_connect(hub);
+		break;
+
+	case USB3503_MODE_STANDBY:
+		usb3503_reset(hub, 0);
+		dev_info(dev, "switched to STANDBY mode\n");
+		break;
+
+	default:
+		dev_err(dev, "unknown mode is requested\n");
+		err = -EINVAL;
+		break;
+	}
+
+	return err;
+}
+
+static const struct regmap_config usb3503_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = USB3503_RESET,
+};
+
+static int usb3503_probe(struct usb3503 *hub)
+{
+	struct device *dev = hub->dev;
+	struct usb3503_platform_data *pdata = dev_get_platdata(dev);
+	struct device_node *np = dev->of_node;
+	int err;
+	bool is_clk_enabled = false;
+	u32 mode = USB3503_MODE_HUB;
+	const u32 *property;
+	enum gpiod_flags flags;
+	int len;
+
+	if (pdata) {
+		hub->port_off_mask	= pdata->port_off_mask;
+		hub->mode		= pdata->initial_mode;
+	} else if (np) {
+		u32 rate = 0;
+		hub->port_off_mask = 0;
+
+		if (!of_property_read_u32(np, "refclk-frequency", &rate)) {
+			switch (rate) {
+			case 38400000:
+			case 26000000:
+			case 19200000:
+			case 12000000:
+				hub->secondary_ref_clk = 0;
+				break;
+			case 24000000:
+			case 27000000:
+			case 25000000:
+			case 50000000:
+				hub->secondary_ref_clk = 1;
+				break;
+			default:
+				dev_err(dev,
+					"unsupported reference clock rate (%d)\n",
+					(int) rate);
+				return -EINVAL;
+			}
+		}
+
+		hub->clk = devm_clk_get_optional(dev, "refclk");
+		if (IS_ERR(hub->clk)) {
+			dev_err(dev, "unable to request refclk (%ld)\n",
+					PTR_ERR(hub->clk));
+			return PTR_ERR(hub->clk);
+		}
+
+		if (rate != 0) {
+			err = clk_set_rate(hub->clk, rate);
+			if (err) {
+				dev_err(dev,
+					"unable to set reference clock rate to %d\n",
+					(int)rate);
+				return err;
+			}
+		}
+
+		err = clk_prepare_enable(hub->clk);
+		if (err) {
+			dev_err(dev, "unable to enable reference clock\n");
+			return err;
+		}
+
+		is_clk_enabled = true;
+		property = of_get_property(np, "disabled-ports", &len);
+		if (property && (len / sizeof(u32)) > 0) {
+			int i;
+			for (i = 0; i < len / sizeof(u32); i++) {
+				u32 port = be32_to_cpu(property[i]);
+				if ((1 <= port) && (port <= 3))
+					hub->port_off_mask |= (1 << port);
+			}
+		}
+
+		of_property_read_u32(np, "initial-mode", &mode);
+		hub->mode = mode;
+	}
+
+	if (hub->secondary_ref_clk)
+		flags = GPIOD_OUT_LOW;
+	else
+		flags = GPIOD_OUT_HIGH;
+	hub->intn = devm_gpiod_get_optional(dev, "intn", flags);
+	if (IS_ERR(hub->intn)) {
+		err = PTR_ERR(hub->intn);
+		goto err_clk;
+	}
+	if (hub->intn)
+		gpiod_set_consumer_name(hub->intn, "usb3503 intn");
+
+	hub->connect = devm_gpiod_get_optional(dev, "connect", GPIOD_OUT_LOW);
+	if (IS_ERR(hub->connect)) {
+		err = PTR_ERR(hub->connect);
+		goto err_clk;
+	}
+	if (hub->connect)
+		gpiod_set_consumer_name(hub->connect, "usb3503 connect");
+
+	hub->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(hub->reset)) {
+		err = PTR_ERR(hub->reset);
+		goto err_clk;
+	}
+	if (hub->reset) {
+		/* Datasheet defines a hardware reset to be at least 100us */
+		usleep_range(100, 10000);
+		gpiod_set_consumer_name(hub->reset, "usb3503 reset");
+	}
+
+	if (hub->port_off_mask && !hub->regmap)
+		dev_err(dev, "Ports disabled with no control interface\n");
+
+	usb3503_switch_mode(hub, hub->mode);
+
+	dev_info(dev, "%s: probed in %s mode\n", __func__,
+			(hub->mode == USB3503_MODE_HUB) ? "hub" : "standby");
+
+	return 0;
+
+err_clk:
+	if (is_clk_enabled)
+		clk_disable_unprepare(hub->clk);
+	return err;
+}
+
+static int usb3503_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	struct usb3503 *hub;
+	int err;
+
+	hub = devm_kzalloc(&i2c->dev, sizeof(struct usb3503), GFP_KERNEL);
+	if (!hub)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, hub);
+	hub->regmap = devm_regmap_init_i2c(i2c, &usb3503_regmap_config);
+	if (IS_ERR(hub->regmap)) {
+		err = PTR_ERR(hub->regmap);
+		dev_err(&i2c->dev, "Failed to initialise regmap: %d\n", err);
+		return err;
+	}
+	hub->dev = &i2c->dev;
+
+	return usb3503_probe(hub);
+}
+
+static void usb3503_i2c_remove(struct i2c_client *i2c)
+{
+	struct usb3503 *hub;
+
+	hub = i2c_get_clientdata(i2c);
+	clk_disable_unprepare(hub->clk);
+}
+
+static int usb3503_platform_probe(struct platform_device *pdev)
+{
+	struct usb3503 *hub;
+
+	hub = devm_kzalloc(&pdev->dev, sizeof(struct usb3503), GFP_KERNEL);
+	if (!hub)
+		return -ENOMEM;
+	hub->dev = &pdev->dev;
+	platform_set_drvdata(pdev, hub);
+
+	return usb3503_probe(hub);
+}
+
+static int usb3503_platform_remove(struct platform_device *pdev)
+{
+	struct usb3503 *hub;
+
+	hub = platform_get_drvdata(pdev);
+	clk_disable_unprepare(hub->clk);
+
+	return 0;
+}
+
+static int __maybe_unused usb3503_suspend(struct usb3503 *hub)
+{
+	usb3503_switch_mode(hub, USB3503_MODE_STANDBY);
+	clk_disable_unprepare(hub->clk);
+
+	return 0;
+}
+
+static int __maybe_unused usb3503_resume(struct usb3503 *hub)
+{
+	clk_prepare_enable(hub->clk);
+	usb3503_switch_mode(hub, hub->mode);
+
+	return 0;
+}
+
+static int __maybe_unused usb3503_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return usb3503_suspend(i2c_get_clientdata(client));
+}
+
+static int __maybe_unused usb3503_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return usb3503_resume(i2c_get_clientdata(client));
+}
+
+static int __maybe_unused usb3503_platform_suspend(struct device *dev)
+{
+	return usb3503_suspend(dev_get_drvdata(dev));
+}
+
+static int __maybe_unused usb3503_platform_resume(struct device *dev)
+{
+	return usb3503_resume(dev_get_drvdata(dev));
+}
+
+static SIMPLE_DEV_PM_OPS(usb3503_i2c_pm_ops, usb3503_i2c_suspend,
+		usb3503_i2c_resume);
+
+static SIMPLE_DEV_PM_OPS(usb3503_platform_pm_ops, usb3503_platform_suspend,
+		usb3503_platform_resume);
+
+static const struct i2c_device_id usb3503_id[] = {
+	{ USB3503_I2C_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, usb3503_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id usb3503_of_match[] = {
+	{ .compatible = "smsc,usb3503", },
+	{ .compatible = "smsc,usb3503a", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, usb3503_of_match);
+#endif
+
+static struct i2c_driver usb3503_i2c_driver = {
+	.driver = {
+		.name = USB3503_I2C_NAME,
+		.pm = pm_ptr(&usb3503_i2c_pm_ops),
+		.of_match_table = of_match_ptr(usb3503_of_match),
+	},
+	.probe		= usb3503_i2c_probe,
+	.remove		= usb3503_i2c_remove,
+	.id_table	= usb3503_id,
+};
+
+static struct platform_driver usb3503_platform_driver = {
+	.driver = {
+		.name = USB3503_I2C_NAME,
+		.of_match_table = of_match_ptr(usb3503_of_match),
+		.pm = pm_ptr(&usb3503_platform_pm_ops),
+	},
+	.probe		= usb3503_platform_probe,
+	.remove		= usb3503_platform_remove,
+};
+
+static int __init usb3503_init(void)
+{
+	int err;
+
+	err = i2c_add_driver(&usb3503_i2c_driver);
+	if (err) {
+		pr_err("usb3503: Failed to register I2C driver: %d\n", err);
+		return err;
+	}
+
+	err = platform_driver_register(&usb3503_platform_driver);
+	if (err) {
+		pr_err("usb3503: Failed to register platform driver: %d\n",
+		       err);
+		i2c_del_driver(&usb3503_i2c_driver);
+		return err;
+	}
+
+	return 0;
+}
+module_init(usb3503_init);
+
+static void __exit usb3503_exit(void)
+{
+	platform_driver_unregister(&usb3503_platform_driver);
+	i2c_del_driver(&usb3503_i2c_driver);
+}
+module_exit(usb3503_exit);
+
+MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>");
+MODULE_DESCRIPTION("USB3503 USB HUB driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/usb4604.c b/drivers/usb/misc/usb4604.c
new file mode 100644
index 000000000..2142af9bb
--- /dev/null
+++ b/drivers/usb/misc/usb4604.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for SMSC USB4604 USB HSIC 4-port 2.0 hub controller driver
+ * Based on usb3503 driver
+ *
+ * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
+ * Copyright (c) 2016 Linaro Ltd.
+ */
+
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+
+enum usb4604_mode {
+	USB4604_MODE_UNKNOWN,
+	USB4604_MODE_HUB,
+	USB4604_MODE_STANDBY,
+};
+
+struct usb4604 {
+	enum usb4604_mode	mode;
+	struct device		*dev;
+	struct gpio_desc	*gpio_reset;
+};
+
+static void usb4604_reset(struct usb4604 *hub, int state)
+{
+	gpiod_set_value_cansleep(hub->gpio_reset, state);
+
+	/* Wait for i2c logic to come up */
+	if (state)
+		msleep(250);
+}
+
+static int usb4604_connect(struct usb4604 *hub)
+{
+	struct device *dev = hub->dev;
+	struct i2c_client *client = to_i2c_client(dev);
+	int err;
+	u8 connect_cmd[] = { 0xaa, 0x55, 0x00 };
+
+	usb4604_reset(hub, 1);
+
+	err = i2c_master_send(client, connect_cmd, ARRAY_SIZE(connect_cmd));
+	if (err < 0) {
+		usb4604_reset(hub, 0);
+		return err;
+	}
+
+	hub->mode = USB4604_MODE_HUB;
+	dev_dbg(dev, "switched to HUB mode\n");
+
+	return 0;
+}
+
+static int usb4604_switch_mode(struct usb4604 *hub, enum usb4604_mode mode)
+{
+	struct device *dev = hub->dev;
+	int err = 0;
+
+	switch (mode) {
+	case USB4604_MODE_HUB:
+		err = usb4604_connect(hub);
+		break;
+
+	case USB4604_MODE_STANDBY:
+		usb4604_reset(hub, 0);
+		dev_dbg(dev, "switched to STANDBY mode\n");
+		break;
+
+	default:
+		dev_err(dev, "unknown mode is requested\n");
+		err = -EINVAL;
+		break;
+	}
+
+	return err;
+}
+
+static int usb4604_probe(struct usb4604 *hub)
+{
+	struct device *dev = hub->dev;
+	struct device_node *np = dev->of_node;
+	struct gpio_desc *gpio;
+	u32 mode = USB4604_MODE_HUB;
+
+	gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio))
+		return PTR_ERR(gpio);
+	hub->gpio_reset = gpio;
+
+	if (of_property_read_u32(np, "initial-mode", &hub->mode))
+		hub->mode = mode;
+
+	return usb4604_switch_mode(hub, hub->mode);
+}
+
+static int usb4604_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	struct usb4604 *hub;
+
+	hub = devm_kzalloc(&i2c->dev, sizeof(*hub), GFP_KERNEL);
+	if (!hub)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, hub);
+	hub->dev = &i2c->dev;
+
+	return usb4604_probe(hub);
+}
+
+static int __maybe_unused usb4604_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct usb4604 *hub = i2c_get_clientdata(client);
+
+	usb4604_switch_mode(hub, USB4604_MODE_STANDBY);
+
+	return 0;
+}
+
+static int __maybe_unused usb4604_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct usb4604 *hub = i2c_get_clientdata(client);
+
+	usb4604_switch_mode(hub, hub->mode);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(usb4604_i2c_pm_ops, usb4604_i2c_suspend,
+		usb4604_i2c_resume);
+
+static const struct i2c_device_id usb4604_id[] = {
+	{ "usb4604", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, usb4604_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id usb4604_of_match[] = {
+	{ .compatible = "smsc,usb4604" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, usb4604_of_match);
+#endif
+
+static struct i2c_driver usb4604_i2c_driver = {
+	.driver = {
+		.name = "usb4604",
+		.pm = pm_ptr(&usb4604_i2c_pm_ops),
+		.of_match_table = of_match_ptr(usb4604_of_match),
+	},
+	.probe		= usb4604_i2c_probe,
+	.id_table	= usb4604_id,
+};
+module_i2c_driver(usb4604_i2c_driver);
+
+MODULE_DESCRIPTION("USB4604 USB HUB driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/misc/usb_u132.h b/drivers/usb/misc/usb_u132.h
new file mode 100644
index 000000000..1584efbbd
--- /dev/null
+++ b/drivers/usb/misc/usb_u132.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+* Common Header File for the Elan Digital Systems U132 adapter
+* this file should be included by both the "ftdi-u132" and
+* the "u132-hcd" modules.
+*
+* Copyright(C) 2006 Elan Digital Systems Limited
+*(http://www.elandigitalsystems.com)
+*
+* Author and Maintainer - Tony Olech - Elan Digital Systems
+*(tony.olech@elandigitalsystems.com)
+*
+* The driver was written by Tony Olech(tony.olech@elandigitalsystems.com)
+* based on various USB client drivers in the 2.6.15 linux kernel
+* with constant reference to the 3rd Edition of Linux Device Drivers
+* published by O'Reilly
+*
+* The U132 adapter is a USB to CardBus adapter specifically designed
+* for PC cards that contain an OHCI host controller. Typical PC cards
+* are the Orange Mobile 3G Option GlobeTrotter Fusion card.
+*
+* The U132 adapter will *NOT *work with PC cards that do not contain
+* an OHCI controller. A simple way to test whether a PC card has an
+* OHCI controller as an interface is to insert the PC card directly
+* into a laptop(or desktop) with a CardBus slot and if "lspci" shows
+* a new USB controller and "lsusb -v" shows a new OHCI Host Controller
+* then there is a good chance that the U132 adapter will support the
+* PC card.(you also need the specific client driver for the PC card)
+*
+* Please inform the Author and Maintainer about any PC cards that
+* contain OHCI Host Controller and work when directly connected to
+* an embedded CardBus slot but do not work when they are connected
+* via an ELAN U132 adapter.
+*
+* The driver consists of two modules, the "ftdi-u132" module is
+* a USB client driver that interfaces to the FTDI chip within
+* the U132 adapter manufactured by Elan Digital Systems, and the
+* "u132-hcd" module is a USB host controller driver that talks
+* to the OHCI controller within CardBus card that are inserted
+* in the U132 adapter.
+*
+* The "ftdi-u132" module should be loaded automatically by the
+* hot plug system when the U132 adapter is plugged in. The module
+* initialises the adapter which mostly consists of synchronising
+* the FTDI chip, before continuously polling the adapter to detect
+* PC card insertions. As soon as a PC card containing a recognised
+* OHCI controller is seen the "ftdi-u132" module explicitly requests
+* the kernel to load the "u132-hcd" module.
+*
+* The "ftdi-u132" module provides the interface to the inserted
+* PC card and the "u132-hcd" module uses the API to send and receive
+* data. The API features call-backs, so that part of the "u132-hcd"
+* module code will run in the context of one of the kernel threads
+* of the "ftdi-u132" module.
+*
+*/
+int ftdi_elan_switch_on_diagnostics(int number);
+void ftdi_elan_gone_away(struct platform_device *pdev);
+void start_usb_lock_device_tracing(void);
+struct u132_platform_data {
+        u16 vendor;
+        u16 device;
+        u8 potpg;
+        void (*port_power) (struct device *dev, int is_on);
+        void (*reset) (struct device *dev);
+};
+int usb_ftdi_elan_edset_single(struct platform_device *pdev, u8 ed_number,
+        void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+        void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+        int toggle_bits, int error_count, int condition_code, int repeat_number,
+         int halted, int skipped, int actual, int non_null));
+int usb_ftdi_elan_edset_output(struct platform_device *pdev, u8 ed_number,
+        void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+        void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+        int toggle_bits, int error_count, int condition_code, int repeat_number,
+         int halted, int skipped, int actual, int non_null));
+int usb_ftdi_elan_edset_empty(struct platform_device *pdev, u8 ed_number,
+        void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+        void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+        int toggle_bits, int error_count, int condition_code, int repeat_number,
+         int halted, int skipped, int actual, int non_null));
+int usb_ftdi_elan_edset_input(struct platform_device *pdev, u8 ed_number,
+        void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+        void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+        int toggle_bits, int error_count, int condition_code, int repeat_number,
+         int halted, int skipped, int actual, int non_null));
+int usb_ftdi_elan_edset_setup(struct platform_device *pdev, u8 ed_number,
+        void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+        void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+        int toggle_bits, int error_count, int condition_code, int repeat_number,
+         int halted, int skipped, int actual, int non_null));
+int usb_ftdi_elan_edset_flush(struct platform_device *pdev, u8 ed_number,
+        void *endp);
+int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, int mem_offset,
+			      u8 width, u32 *data);
+int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, int mem_offset,
+			       u8 width, u32 data);
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
new file mode 100644
index 000000000..bb546f624
--- /dev/null
+++ b/drivers/usb/misc/usblcd.c
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: GPL-2.0
+/*****************************************************************************
+ *                          USBLCD Kernel Driver                             *
+ *                            Version 1.05                                   *
+ *             (C) 2005 Georges Toth <g.toth@e-biz.lu>                       *
+ *                                                                           *
+ *     This file is licensed under the GPL. See COPYING in the package.      *
+ * Based on usb-skeleton.c 2.0 by Greg Kroah-Hartman (greg@kroah.com)        *
+ *                                                                           *
+ *                                                                           *
+ * 28.02.05 Complete rewrite of the original usblcd.c driver,                *
+ *          based on usb_skeleton.c.                                         *
+ *          This new driver allows more than one USB-LCD to be connected     *
+ *          and controlled, at once                                          *
+ *****************************************************************************/
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/rwsem.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+
+#define DRIVER_VERSION "USBLCD Driver Version 1.05"
+
+#define USBLCD_MINOR		144
+
+#define IOCTL_GET_HARD_VERSION	1
+#define IOCTL_GET_DRV_VERSION	2
+
+
+static const struct usb_device_id id_table[] = {
+	{ .idVendor = 0x10D2, .match_flags = USB_DEVICE_ID_MATCH_VENDOR, },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct usb_lcd {
+	struct usb_device	*udev;			/* init: probe_lcd */
+	struct usb_interface	*interface;		/* the interface for
+							   this device */
+	unsigned char		*bulk_in_buffer;	/* the buffer to receive
+							   data */
+	size_t			bulk_in_size;		/* the size of the
+							   receive buffer */
+	__u8			bulk_in_endpointAddr;	/* the address of the
+							   bulk in endpoint */
+	__u8			bulk_out_endpointAddr;	/* the address of the
+							   bulk out endpoint */
+	struct kref		kref;
+	struct semaphore	limit_sem;		/* to stop writes at
+							   full throttle from
+							   using up all RAM */
+	struct usb_anchor	submitted;		/* URBs to wait for
+							   before suspend */
+	struct rw_semaphore	io_rwsem;
+	unsigned long		disconnected:1;
+};
+#define to_lcd_dev(d) container_of(d, struct usb_lcd, kref)
+
+#define USB_LCD_CONCURRENT_WRITES	5
+
+static struct usb_driver lcd_driver;
+
+
+static void lcd_delete(struct kref *kref)
+{
+	struct usb_lcd *dev = to_lcd_dev(kref);
+
+	usb_put_dev(dev->udev);
+	kfree(dev->bulk_in_buffer);
+	kfree(dev);
+}
+
+
+static int lcd_open(struct inode *inode, struct file *file)
+{
+	struct usb_lcd *dev;
+	struct usb_interface *interface;
+	int subminor, r;
+
+	subminor = iminor(inode);
+
+	interface = usb_find_interface(&lcd_driver, subminor);
+	if (!interface) {
+		pr_err("USBLCD: %s - error, can't find device for minor %d\n",
+		       __func__, subminor);
+		return -ENODEV;
+	}
+
+	dev = usb_get_intfdata(interface);
+
+	/* increment our usage count for the device */
+	kref_get(&dev->kref);
+
+	/* grab a power reference */
+	r = usb_autopm_get_interface(interface);
+	if (r < 0) {
+		kref_put(&dev->kref, lcd_delete);
+		return r;
+	}
+
+	/* save our object in the file's private structure */
+	file->private_data = dev;
+
+	return 0;
+}
+
+static int lcd_release(struct inode *inode, struct file *file)
+{
+	struct usb_lcd *dev;
+
+	dev = file->private_data;
+	if (dev == NULL)
+		return -ENODEV;
+
+	/* decrement the count on our device */
+	usb_autopm_put_interface(dev->interface);
+	kref_put(&dev->kref, lcd_delete);
+	return 0;
+}
+
+static ssize_t lcd_read(struct file *file, char __user * buffer,
+			size_t count, loff_t *ppos)
+{
+	struct usb_lcd *dev;
+	int retval = 0;
+	int bytes_read;
+
+	dev = file->private_data;
+
+	down_read(&dev->io_rwsem);
+
+	if (dev->disconnected) {
+		retval = -ENODEV;
+		goto out_up_io;
+	}
+
+	/* do a blocking bulk read to get data from the device */
+	retval = usb_bulk_msg(dev->udev,
+			      usb_rcvbulkpipe(dev->udev,
+					      dev->bulk_in_endpointAddr),
+			      dev->bulk_in_buffer,
+			      min(dev->bulk_in_size, count),
+			      &bytes_read, 10000);
+
+	/* if the read was successful, copy the data to userspace */
+	if (!retval) {
+		if (copy_to_user(buffer, dev->bulk_in_buffer, bytes_read))
+			retval = -EFAULT;
+		else
+			retval = bytes_read;
+	}
+
+out_up_io:
+	up_read(&dev->io_rwsem);
+
+	return retval;
+}
+
+static long lcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct usb_lcd *dev;
+	u16 bcdDevice;
+	char buf[30];
+
+	dev = file->private_data;
+	if (dev == NULL)
+		return -ENODEV;
+
+	switch (cmd) {
+	case IOCTL_GET_HARD_VERSION:
+		bcdDevice = le16_to_cpu((dev->udev)->descriptor.bcdDevice);
+		sprintf(buf, "%1d%1d.%1d%1d",
+			(bcdDevice & 0xF000)>>12,
+			(bcdDevice & 0xF00)>>8,
+			(bcdDevice & 0xF0)>>4,
+			(bcdDevice & 0xF));
+		if (copy_to_user((void __user *)arg, buf, strlen(buf)) != 0)
+			return -EFAULT;
+		break;
+	case IOCTL_GET_DRV_VERSION:
+		sprintf(buf, DRIVER_VERSION);
+		if (copy_to_user((void __user *)arg, buf, strlen(buf)) != 0)
+			return -EFAULT;
+		break;
+	default:
+		return -ENOTTY;
+	}
+
+	return 0;
+}
+
+static void lcd_write_bulk_callback(struct urb *urb)
+{
+	struct usb_lcd *dev;
+	int status = urb->status;
+
+	dev = urb->context;
+
+	/* sync/async unlink faults aren't errors */
+	if (status &&
+	    !(status == -ENOENT ||
+	      status == -ECONNRESET ||
+	      status == -ESHUTDOWN)) {
+		dev_dbg(&dev->interface->dev,
+			"nonzero write bulk status received: %d\n", status);
+	}
+
+	/* free up our allocated buffer */
+	usb_free_coherent(urb->dev, urb->transfer_buffer_length,
+			  urb->transfer_buffer, urb->transfer_dma);
+	up(&dev->limit_sem);
+}
+
+static ssize_t lcd_write(struct file *file, const char __user * user_buffer,
+			 size_t count, loff_t *ppos)
+{
+	struct usb_lcd *dev;
+	int retval = 0, r;
+	struct urb *urb = NULL;
+	char *buf = NULL;
+
+	dev = file->private_data;
+
+	/* verify that we actually have some data to write */
+	if (count == 0)
+		goto exit;
+
+	r = down_interruptible(&dev->limit_sem);
+	if (r < 0)
+		return -EINTR;
+
+	down_read(&dev->io_rwsem);
+
+	if (dev->disconnected) {
+		retval = -ENODEV;
+		goto err_up_io;
+	}
+
+	/* create a urb, and a buffer for it, and copy the data to the urb */
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb) {
+		retval = -ENOMEM;
+		goto err_up_io;
+	}
+
+	buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL,
+				 &urb->transfer_dma);
+	if (!buf) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	if (copy_from_user(buf, user_buffer, count)) {
+		retval = -EFAULT;
+		goto error;
+	}
+
+	/* initialize the urb properly */
+	usb_fill_bulk_urb(urb, dev->udev,
+			  usb_sndbulkpipe(dev->udev,
+			  dev->bulk_out_endpointAddr),
+			  buf, count, lcd_write_bulk_callback, dev);
+	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	usb_anchor_urb(urb, &dev->submitted);
+
+	/* send the data out the bulk port */
+	retval = usb_submit_urb(urb, GFP_KERNEL);
+	if (retval) {
+		dev_err(&dev->udev->dev,
+			"%s - failed submitting write urb, error %d\n",
+			__func__, retval);
+		goto error_unanchor;
+	}
+
+	/* release our reference to this urb,
+	   the USB core will eventually free it entirely */
+	usb_free_urb(urb);
+
+	up_read(&dev->io_rwsem);
+exit:
+	return count;
+error_unanchor:
+	usb_unanchor_urb(urb);
+error:
+	usb_free_coherent(dev->udev, count, buf, urb->transfer_dma);
+	usb_free_urb(urb);
+err_up_io:
+	up_read(&dev->io_rwsem);
+	up(&dev->limit_sem);
+	return retval;
+}
+
+static const struct file_operations lcd_fops = {
+	.owner =        THIS_MODULE,
+	.read =         lcd_read,
+	.write =        lcd_write,
+	.open =         lcd_open,
+	.unlocked_ioctl = lcd_ioctl,
+	.release =      lcd_release,
+	.llseek =	 noop_llseek,
+};
+
+/*
+ * usb class driver info in order to get a minor number from the usb core,
+ * and to have the device registered with the driver core
+ */
+static struct usb_class_driver lcd_class = {
+	.name =         "lcd%d",
+	.fops =         &lcd_fops,
+	.minor_base =   USBLCD_MINOR,
+};
+
+static int lcd_probe(struct usb_interface *interface,
+		     const struct usb_device_id *id)
+{
+	struct usb_lcd *dev = NULL;
+	struct usb_endpoint_descriptor *bulk_in, *bulk_out;
+	int i;
+	int retval;
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	kref_init(&dev->kref);
+	sema_init(&dev->limit_sem, USB_LCD_CONCURRENT_WRITES);
+	init_rwsem(&dev->io_rwsem);
+	init_usb_anchor(&dev->submitted);
+
+	dev->udev = usb_get_dev(interface_to_usbdev(interface));
+	dev->interface = interface;
+
+	if (le16_to_cpu(dev->udev->descriptor.idProduct) != 0x0001) {
+		dev_warn(&interface->dev, "USBLCD model not supported.\n");
+		retval = -ENODEV;
+		goto error;
+	}
+
+	/* set up the endpoint information */
+	/* use only the first bulk-in and bulk-out endpoints */
+	retval = usb_find_common_endpoints(interface->cur_altsetting,
+			&bulk_in, &bulk_out, NULL, NULL);
+	if (retval) {
+		dev_err(&interface->dev,
+			"Could not find both bulk-in and bulk-out endpoints\n");
+		goto error;
+	}
+
+	dev->bulk_in_size = usb_endpoint_maxp(bulk_in);
+	dev->bulk_in_endpointAddr = bulk_in->bEndpointAddress;
+	dev->bulk_in_buffer = kmalloc(dev->bulk_in_size, GFP_KERNEL);
+	if (!dev->bulk_in_buffer) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	dev->bulk_out_endpointAddr = bulk_out->bEndpointAddress;
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, dev);
+
+	/* we can register the device now, as it is ready */
+	retval = usb_register_dev(interface, &lcd_class);
+	if (retval) {
+		/* something prevented us from registering this driver */
+		dev_err(&interface->dev,
+			"Not able to get a minor for this device.\n");
+		goto error;
+	}
+
+	i = le16_to_cpu(dev->udev->descriptor.bcdDevice);
+
+	dev_info(&interface->dev, "USBLCD Version %1d%1d.%1d%1d found "
+		 "at address %d\n", (i & 0xF000)>>12, (i & 0xF00)>>8,
+		 (i & 0xF0)>>4, (i & 0xF), dev->udev->devnum);
+
+	/* let the user know what node this device is now attached to */
+	dev_info(&interface->dev, "USB LCD device now attached to USBLCD-%d\n",
+		 interface->minor);
+	return 0;
+
+error:
+	kref_put(&dev->kref, lcd_delete);
+	return retval;
+}
+
+static void lcd_draw_down(struct usb_lcd *dev)
+{
+	int time;
+
+	time = usb_wait_anchor_empty_timeout(&dev->submitted, 1000);
+	if (!time)
+		usb_kill_anchored_urbs(&dev->submitted);
+}
+
+static int lcd_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usb_lcd *dev = usb_get_intfdata(intf);
+
+	if (!dev)
+		return 0;
+	lcd_draw_down(dev);
+	return 0;
+}
+
+static int lcd_resume(struct usb_interface *intf)
+{
+	return 0;
+}
+
+static void lcd_disconnect(struct usb_interface *interface)
+{
+	struct usb_lcd *dev = usb_get_intfdata(interface);
+	int minor = interface->minor;
+
+	/* give back our minor */
+	usb_deregister_dev(interface, &lcd_class);
+
+	down_write(&dev->io_rwsem);
+	dev->disconnected = 1;
+	up_write(&dev->io_rwsem);
+
+	usb_kill_anchored_urbs(&dev->submitted);
+
+	/* decrement our usage count */
+	kref_put(&dev->kref, lcd_delete);
+
+	dev_info(&interface->dev, "USB LCD #%d now disconnected\n", minor);
+}
+
+static struct usb_driver lcd_driver = {
+	.name =		"usblcd",
+	.probe =	lcd_probe,
+	.disconnect =	lcd_disconnect,
+	.suspend =	lcd_suspend,
+	.resume =	lcd_resume,
+	.id_table =	id_table,
+	.supports_autosuspend = 1,
+};
+
+module_usb_driver(lcd_driver);
+
+MODULE_AUTHOR("Georges Toth <g.toth@e-biz.lu>");
+MODULE_DESCRIPTION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
new file mode 100644
index 000000000..c3114d9bd
--- /dev/null
+++ b/drivers/usb/misc/usbsevseg.c
@@ -0,0 +1,396 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB 7 Segment Driver
+ *
+ * Copyright (C) 2008 Harrison Metzger <harrisonmetz@gmail.com>
+ * Based on usbled.c by Greg Kroah-Hartman (greg@kroah.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/usb.h>
+
+
+#define DRIVER_AUTHOR "Harrison Metzger <harrisonmetz@gmail.com>"
+#define DRIVER_DESC "USB 7 Segment Driver"
+
+#define VENDOR_ID	0x0fc5
+#define PRODUCT_ID	0x1227
+#define MAXLEN		8
+
+/* table of devices that work with this driver */
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(VENDOR_ID, PRODUCT_ID) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* the different text display modes the device is capable of */
+static const char *display_textmodes[] = {"raw", "hex", "ascii"};
+
+struct usb_sevsegdev {
+	struct usb_device *udev;
+	struct usb_interface *intf;
+
+	u8 powered;
+	u8 mode_msb;
+	u8 mode_lsb;
+	u8 decimals[MAXLEN];
+	u8 textmode;
+	u8 text[MAXLEN];
+	u16 textlength;
+
+	u8 shadow_power; /* for PM */
+	u8 has_interface_pm;
+};
+
+/* sysfs_streq can't replace this completely
+ * If the device was in hex mode, and the user wanted a 0,
+ * if str commands are used, we would assume the end of string
+ * so mem commands are used.
+ */
+static inline size_t my_memlen(const char *buf, size_t count)
+{
+	if (count > 0 && buf[count-1] == '\n')
+		return count - 1;
+	else
+		return count;
+}
+
+static void update_display_powered(struct usb_sevsegdev *mydev)
+{
+	int rc;
+
+	if (mydev->powered && !mydev->has_interface_pm) {
+		rc = usb_autopm_get_interface(mydev->intf);
+		if (rc < 0)
+			return;
+		mydev->has_interface_pm = 1;
+	}
+
+	if (mydev->shadow_power != 1)
+		return;
+
+	rc = usb_control_msg_send(mydev->udev, 0, 0x12, 0x48,
+				  (80 * 0x100) + 10, /*  (power mode) */
+				  (0x00 * 0x100) + (mydev->powered ? 1 : 0),
+				  NULL, 0, 2000, GFP_KERNEL);
+	if (rc < 0)
+		dev_dbg(&mydev->udev->dev, "power retval = %d\n", rc);
+
+	if (!mydev->powered && mydev->has_interface_pm) {
+		usb_autopm_put_interface(mydev->intf);
+		mydev->has_interface_pm = 0;
+	}
+}
+
+static void update_display_mode(struct usb_sevsegdev *mydev)
+{
+	int rc;
+
+	if(mydev->shadow_power != 1)
+		return;
+
+	rc = usb_control_msg_send(mydev->udev, 0, 0x12, 0x48,
+				  (82 * 0x100) + 10, /* (set mode) */
+				  (mydev->mode_msb * 0x100) + mydev->mode_lsb,
+				  NULL, 0, 2000, GFP_NOIO);
+
+	if (rc < 0)
+		dev_dbg(&mydev->udev->dev, "mode retval = %d\n", rc);
+}
+
+static void update_display_visual(struct usb_sevsegdev *mydev, gfp_t mf)
+{
+	int rc;
+	int i;
+	unsigned char buffer[MAXLEN] = {0};
+	u8 decimals = 0;
+
+	if(mydev->shadow_power != 1)
+		return;
+
+	/* The device is right to left, where as you write left to right */
+	for (i = 0; i < mydev->textlength; i++)
+		buffer[i] = mydev->text[mydev->textlength-1-i];
+
+	rc = usb_control_msg_send(mydev->udev, 0, 0x12, 0x48,
+				  (85 * 0x100) + 10, /* (write text) */
+				  (0 * 0x100) + mydev->textmode, /* mode  */
+				  &buffer, mydev->textlength, 2000, mf);
+
+	if (rc < 0)
+		dev_dbg(&mydev->udev->dev, "write retval = %d\n", rc);
+
+	/* The device is right to left, where as you write left to right */
+	for (i = 0; i < sizeof(mydev->decimals); i++)
+		decimals |= mydev->decimals[i] << i;
+
+	rc = usb_control_msg_send(mydev->udev, 0, 0x12, 0x48,
+				  (86 * 0x100) + 10, /* (set decimal) */
+				  (0 * 0x100) + decimals, /* decimals */
+				  NULL, 0, 2000, mf);
+
+	if (rc < 0)
+		dev_dbg(&mydev->udev->dev, "decimal retval = %d\n", rc);
+}
+
+#define MYDEV_ATTR_SIMPLE_UNSIGNED(name, update_fcn)		\
+static ssize_t name##_show(struct device *dev,			\
+	struct device_attribute *attr, char *buf) 		\
+{								\
+	struct usb_interface *intf = to_usb_interface(dev);	\
+	struct usb_sevsegdev *mydev = usb_get_intfdata(intf);	\
+								\
+	return sprintf(buf, "%u\n", mydev->name);		\
+}								\
+								\
+static ssize_t name##_store(struct device *dev,			\
+	struct device_attribute *attr, const char *buf, size_t count) \
+{								\
+	struct usb_interface *intf = to_usb_interface(dev);	\
+	struct usb_sevsegdev *mydev = usb_get_intfdata(intf);	\
+								\
+	mydev->name = simple_strtoul(buf, NULL, 10);		\
+	update_fcn(mydev); 					\
+								\
+	return count;						\
+}								\
+static DEVICE_ATTR_RW(name);
+
+static ssize_t text_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_sevsegdev *mydev = usb_get_intfdata(intf);
+
+	return sysfs_emit(buf, "%s\n", mydev->text);
+}
+
+static ssize_t text_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_sevsegdev *mydev = usb_get_intfdata(intf);
+	size_t end = my_memlen(buf, count);
+
+	if (end > sizeof(mydev->text))
+		return -EINVAL;
+
+	memset(mydev->text, 0, sizeof(mydev->text));
+	mydev->textlength = end;
+
+	if (end > 0)
+		memcpy(mydev->text, buf, end);
+
+	update_display_visual(mydev, GFP_KERNEL);
+	return count;
+}
+
+static DEVICE_ATTR_RW(text);
+
+static ssize_t decimals_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_sevsegdev *mydev = usb_get_intfdata(intf);
+	int i;
+	int pos;
+
+	for (i = 0; i < sizeof(mydev->decimals); i++) {
+		pos = sizeof(mydev->decimals) - 1 - i;
+		if (mydev->decimals[i] == 0)
+			buf[pos] = '0';
+		else if (mydev->decimals[i] == 1)
+			buf[pos] = '1';
+		else
+			buf[pos] = 'x';
+	}
+
+	buf[sizeof(mydev->decimals)] = '\n';
+	return sizeof(mydev->decimals) + 1;
+}
+
+static ssize_t decimals_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_sevsegdev *mydev = usb_get_intfdata(intf);
+	size_t end = my_memlen(buf, count);
+	int i;
+
+	if (end > sizeof(mydev->decimals))
+		return -EINVAL;
+
+	for (i = 0; i < end; i++)
+		if (buf[i] != '0' && buf[i] != '1')
+			return -EINVAL;
+
+	memset(mydev->decimals, 0, sizeof(mydev->decimals));
+	for (i = 0; i < end; i++)
+		if (buf[i] == '1')
+			mydev->decimals[end-1-i] = 1;
+
+	update_display_visual(mydev, GFP_KERNEL);
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(decimals);
+
+static ssize_t textmode_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_sevsegdev *mydev = usb_get_intfdata(intf);
+	int i;
+
+	buf[0] = 0;
+
+	for (i = 0; i < ARRAY_SIZE(display_textmodes); i++) {
+		if (mydev->textmode == i) {
+			strcat(buf, " [");
+			strcat(buf, display_textmodes[i]);
+			strcat(buf, "] ");
+		} else {
+			strcat(buf, " ");
+			strcat(buf, display_textmodes[i]);
+			strcat(buf, " ");
+		}
+	}
+	strcat(buf, "\n");
+
+
+	return strlen(buf);
+}
+
+static ssize_t textmode_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_sevsegdev *mydev = usb_get_intfdata(intf);
+	int i;
+
+	i = sysfs_match_string(display_textmodes, buf);
+	if (i < 0)
+		return i;
+
+	mydev->textmode = i;
+	update_display_visual(mydev, GFP_KERNEL);
+	return count;
+}
+
+static DEVICE_ATTR_RW(textmode);
+
+
+MYDEV_ATTR_SIMPLE_UNSIGNED(powered, update_display_powered);
+MYDEV_ATTR_SIMPLE_UNSIGNED(mode_msb, update_display_mode);
+MYDEV_ATTR_SIMPLE_UNSIGNED(mode_lsb, update_display_mode);
+
+static struct attribute *sevseg_attrs[] = {
+	&dev_attr_powered.attr,
+	&dev_attr_text.attr,
+	&dev_attr_textmode.attr,
+	&dev_attr_decimals.attr,
+	&dev_attr_mode_msb.attr,
+	&dev_attr_mode_lsb.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(sevseg);
+
+static int sevseg_probe(struct usb_interface *interface,
+	const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_sevsegdev *mydev = NULL;
+	int rc = -ENOMEM;
+
+	mydev = kzalloc(sizeof(struct usb_sevsegdev), GFP_KERNEL);
+	if (!mydev)
+		goto error_mem;
+
+	mydev->udev = usb_get_dev(udev);
+	mydev->intf = interface;
+	usb_set_intfdata(interface, mydev);
+
+	/* PM */
+	mydev->shadow_power = 1; /* currently active */
+	mydev->has_interface_pm = 0; /* have not issued autopm_get */
+
+	/*set defaults */
+	mydev->textmode = 0x02; /* ascii mode */
+	mydev->mode_msb = 0x06; /* 6 characters */
+	mydev->mode_lsb = 0x3f; /* scanmode for 6 chars */
+
+	dev_info(&interface->dev, "USB 7 Segment device now attached\n");
+	return 0;
+
+error_mem:
+	return rc;
+}
+
+static void sevseg_disconnect(struct usb_interface *interface)
+{
+	struct usb_sevsegdev *mydev;
+
+	mydev = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
+	usb_put_dev(mydev->udev);
+	kfree(mydev);
+	dev_info(&interface->dev, "USB 7 Segment now disconnected\n");
+}
+
+static int sevseg_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usb_sevsegdev *mydev;
+
+	mydev = usb_get_intfdata(intf);
+	mydev->shadow_power = 0;
+
+	return 0;
+}
+
+static int sevseg_resume(struct usb_interface *intf)
+{
+	struct usb_sevsegdev *mydev;
+
+	mydev = usb_get_intfdata(intf);
+	mydev->shadow_power = 1;
+	update_display_mode(mydev);
+	update_display_visual(mydev, GFP_NOIO);
+
+	return 0;
+}
+
+static int sevseg_reset_resume(struct usb_interface *intf)
+{
+	struct usb_sevsegdev *mydev;
+
+	mydev = usb_get_intfdata(intf);
+	mydev->shadow_power = 1;
+	update_display_mode(mydev);
+	update_display_visual(mydev, GFP_NOIO);
+
+	return 0;
+}
+
+static struct usb_driver sevseg_driver = {
+	.name =		"usbsevseg",
+	.probe =	sevseg_probe,
+	.disconnect =	sevseg_disconnect,
+	.suspend =	sevseg_suspend,
+	.resume =	sevseg_resume,
+	.reset_resume =	sevseg_reset_resume,
+	.id_table =	id_table,
+	.dev_groups =	sevseg_groups,
+	.supports_autosuspend = 1,
+};
+
+module_usb_driver(sevseg_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
new file mode 100644
index 000000000..ac0d75ac2
--- /dev/null
+++ b/drivers/usb/misc/usbtest.c
@@ -0,0 +1,3078 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/scatterlist.h>
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/usb.h>
+
+#define SIMPLE_IO_TIMEOUT	10000	/* in milliseconds */
+
+/*-------------------------------------------------------------------------*/
+
+static int override_alt = -1;
+module_param_named(alt, override_alt, int, 0644);
+MODULE_PARM_DESC(alt, ">= 0 to override altsetting selection");
+static void complicated_callback(struct urb *urb);
+
+/*-------------------------------------------------------------------------*/
+
+/* FIXME make these public somewhere; usbdevfs.h? */
+
+/* Parameter for usbtest driver. */
+struct usbtest_param_32 {
+	/* inputs */
+	__u32		test_num;	/* 0..(TEST_CASES-1) */
+	__u32		iterations;
+	__u32		length;
+	__u32		vary;
+	__u32		sglen;
+
+	/* outputs */
+	__s32		duration_sec;
+	__s32		duration_usec;
+};
+
+/*
+ * Compat parameter to the usbtest driver.
+ * This supports older user space binaries compiled with 64 bit compiler.
+ */
+struct usbtest_param_64 {
+	/* inputs */
+	__u32		test_num;	/* 0..(TEST_CASES-1) */
+	__u32		iterations;
+	__u32		length;
+	__u32		vary;
+	__u32		sglen;
+
+	/* outputs */
+	__s64		duration_sec;
+	__s64		duration_usec;
+};
+
+/* IOCTL interface to the driver. */
+#define USBTEST_REQUEST_32    _IOWR('U', 100, struct usbtest_param_32)
+/* COMPAT IOCTL interface to the driver. */
+#define USBTEST_REQUEST_64    _IOWR('U', 100, struct usbtest_param_64)
+
+/*-------------------------------------------------------------------------*/
+
+#define	GENERIC		/* let probe() bind using module params */
+
+/* Some devices that can be used for testing will have "real" drivers.
+ * Entries for those need to be enabled here by hand, after disabling
+ * that "real" driver.
+ */
+//#define	IBOT2		/* grab iBOT2 webcams */
+//#define	KEYSPAN_19Qi	/* grab un-renumerated serial adapter */
+
+/*-------------------------------------------------------------------------*/
+
+struct usbtest_info {
+	const char		*name;
+	u8			ep_in;		/* bulk/intr source */
+	u8			ep_out;		/* bulk/intr sink */
+	unsigned		autoconf:1;
+	unsigned		ctrl_out:1;
+	unsigned		iso:1;		/* try iso in/out */
+	unsigned		intr:1;		/* try interrupt in/out */
+	int			alt;
+};
+
+/* this is accessed only through usbfs ioctl calls.
+ * one ioctl to issue a test ... one lock per device.
+ * tests create other threads if they need them.
+ * urbs and buffers are allocated dynamically,
+ * and data generated deterministically.
+ */
+struct usbtest_dev {
+	struct usb_interface	*intf;
+	struct usbtest_info	*info;
+	int			in_pipe;
+	int			out_pipe;
+	int			in_iso_pipe;
+	int			out_iso_pipe;
+	int			in_int_pipe;
+	int			out_int_pipe;
+	struct usb_endpoint_descriptor	*iso_in, *iso_out;
+	struct usb_endpoint_descriptor	*int_in, *int_out;
+	struct mutex		lock;
+
+#define TBUF_SIZE	256
+	u8			*buf;
+};
+
+static struct usb_device *testdev_to_usbdev(struct usbtest_dev *test)
+{
+	return interface_to_usbdev(test->intf);
+}
+
+/* set up all urbs so they can be used with either bulk or interrupt */
+#define	INTERRUPT_RATE		1	/* msec/transfer */
+
+#define ERROR(tdev, fmt, args...) \
+	dev_err(&(tdev)->intf->dev , fmt , ## args)
+#define WARNING(tdev, fmt, args...) \
+	dev_warn(&(tdev)->intf->dev , fmt , ## args)
+
+#define GUARD_BYTE	0xA5
+#define MAX_SGLEN	128
+
+/*-------------------------------------------------------------------------*/
+
+static inline void endpoint_update(int edi,
+				   struct usb_host_endpoint **in,
+				   struct usb_host_endpoint **out,
+				   struct usb_host_endpoint *e)
+{
+	if (edi) {
+		if (!*in)
+			*in = e;
+	} else {
+		if (!*out)
+			*out = e;
+	}
+}
+
+static int
+get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf)
+{
+	int				tmp;
+	struct usb_host_interface	*alt;
+	struct usb_host_endpoint	*in, *out;
+	struct usb_host_endpoint	*iso_in, *iso_out;
+	struct usb_host_endpoint	*int_in, *int_out;
+	struct usb_device		*udev;
+
+	for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
+		unsigned	ep;
+
+		in = out = NULL;
+		iso_in = iso_out = NULL;
+		int_in = int_out = NULL;
+		alt = intf->altsetting + tmp;
+
+		if (override_alt >= 0 &&
+				override_alt != alt->desc.bAlternateSetting)
+			continue;
+
+		/* take the first altsetting with in-bulk + out-bulk;
+		 * ignore other endpoints and altsettings.
+		 */
+		for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
+			struct usb_host_endpoint	*e;
+			int edi;
+
+			e = alt->endpoint + ep;
+			edi = usb_endpoint_dir_in(&e->desc);
+
+			switch (usb_endpoint_type(&e->desc)) {
+			case USB_ENDPOINT_XFER_BULK:
+				endpoint_update(edi, &in, &out, e);
+				continue;
+			case USB_ENDPOINT_XFER_INT:
+				if (dev->info->intr)
+					endpoint_update(edi, &int_in, &int_out, e);
+				continue;
+			case USB_ENDPOINT_XFER_ISOC:
+				if (dev->info->iso)
+					endpoint_update(edi, &iso_in, &iso_out, e);
+				fallthrough;
+			default:
+				continue;
+			}
+		}
+		if ((in && out)  ||  iso_in || iso_out || int_in || int_out)
+			goto found;
+	}
+	return -EINVAL;
+
+found:
+	udev = testdev_to_usbdev(dev);
+	dev->info->alt = alt->desc.bAlternateSetting;
+	if (alt->desc.bAlternateSetting != 0) {
+		tmp = usb_set_interface(udev,
+				alt->desc.bInterfaceNumber,
+				alt->desc.bAlternateSetting);
+		if (tmp < 0)
+			return tmp;
+	}
+
+	if (in)
+		dev->in_pipe = usb_rcvbulkpipe(udev,
+			in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+	if (out)
+		dev->out_pipe = usb_sndbulkpipe(udev,
+			out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+
+	if (iso_in) {
+		dev->iso_in = &iso_in->desc;
+		dev->in_iso_pipe = usb_rcvisocpipe(udev,
+				iso_in->desc.bEndpointAddress
+					& USB_ENDPOINT_NUMBER_MASK);
+	}
+
+	if (iso_out) {
+		dev->iso_out = &iso_out->desc;
+		dev->out_iso_pipe = usb_sndisocpipe(udev,
+				iso_out->desc.bEndpointAddress
+					& USB_ENDPOINT_NUMBER_MASK);
+	}
+
+	if (int_in) {
+		dev->int_in = &int_in->desc;
+		dev->in_int_pipe = usb_rcvintpipe(udev,
+				int_in->desc.bEndpointAddress
+					& USB_ENDPOINT_NUMBER_MASK);
+	}
+
+	if (int_out) {
+		dev->int_out = &int_out->desc;
+		dev->out_int_pipe = usb_sndintpipe(udev,
+				int_out->desc.bEndpointAddress
+					& USB_ENDPOINT_NUMBER_MASK);
+	}
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Support for testing basic non-queued I/O streams.
+ *
+ * These just package urbs as requests that can be easily canceled.
+ * Each urb's data buffer is dynamically allocated; callers can fill
+ * them with non-zero test data (or test for it) when appropriate.
+ */
+
+static void simple_callback(struct urb *urb)
+{
+	complete(urb->context);
+}
+
+static struct urb *usbtest_alloc_urb(
+	struct usb_device	*udev,
+	int			pipe,
+	unsigned long		bytes,
+	unsigned		transfer_flags,
+	unsigned		offset,
+	u8			bInterval,
+	usb_complete_t		complete_fn)
+{
+	struct urb		*urb;
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return urb;
+
+	if (bInterval)
+		usb_fill_int_urb(urb, udev, pipe, NULL, bytes, complete_fn,
+				NULL, bInterval);
+	else
+		usb_fill_bulk_urb(urb, udev, pipe, NULL, bytes, complete_fn,
+				NULL);
+
+	urb->interval = (udev->speed == USB_SPEED_HIGH)
+			? (INTERRUPT_RATE << 3)
+			: INTERRUPT_RATE;
+	urb->transfer_flags = transfer_flags;
+	if (usb_pipein(pipe))
+		urb->transfer_flags |= URB_SHORT_NOT_OK;
+
+	if ((bytes + offset) == 0)
+		return urb;
+
+	if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
+		urb->transfer_buffer = usb_alloc_coherent(udev, bytes + offset,
+			GFP_KERNEL, &urb->transfer_dma);
+	else
+		urb->transfer_buffer = kmalloc(bytes + offset, GFP_KERNEL);
+
+	if (!urb->transfer_buffer) {
+		usb_free_urb(urb);
+		return NULL;
+	}
+
+	/* To test unaligned transfers add an offset and fill the
+		unused memory with a guard value */
+	if (offset) {
+		memset(urb->transfer_buffer, GUARD_BYTE, offset);
+		urb->transfer_buffer += offset;
+		if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
+			urb->transfer_dma += offset;
+	}
+
+	/* For inbound transfers use guard byte so that test fails if
+		data not correctly copied */
+	memset(urb->transfer_buffer,
+			usb_pipein(urb->pipe) ? GUARD_BYTE : 0,
+			bytes);
+	return urb;
+}
+
+static struct urb *simple_alloc_urb(
+	struct usb_device	*udev,
+	int			pipe,
+	unsigned long		bytes,
+	u8			bInterval)
+{
+	return usbtest_alloc_urb(udev, pipe, bytes, URB_NO_TRANSFER_DMA_MAP, 0,
+			bInterval, simple_callback);
+}
+
+static struct urb *complicated_alloc_urb(
+	struct usb_device	*udev,
+	int			pipe,
+	unsigned long		bytes,
+	u8			bInterval)
+{
+	return usbtest_alloc_urb(udev, pipe, bytes, URB_NO_TRANSFER_DMA_MAP, 0,
+			bInterval, complicated_callback);
+}
+
+static unsigned pattern;
+static unsigned mod_pattern;
+module_param_named(pattern, mod_pattern, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(mod_pattern, "i/o pattern (0 == zeroes)");
+
+static unsigned get_maxpacket(struct usb_device *udev, int pipe)
+{
+	struct usb_host_endpoint	*ep;
+
+	ep = usb_pipe_endpoint(udev, pipe);
+	return le16_to_cpup(&ep->desc.wMaxPacketSize);
+}
+
+static int ss_isoc_get_packet_num(struct usb_device *udev, int pipe)
+{
+	struct usb_host_endpoint *ep = usb_pipe_endpoint(udev, pipe);
+
+	return USB_SS_MULT(ep->ss_ep_comp.bmAttributes)
+		* (1 + ep->ss_ep_comp.bMaxBurst);
+}
+
+static void simple_fill_buf(struct urb *urb)
+{
+	unsigned	i;
+	u8		*buf = urb->transfer_buffer;
+	unsigned	len = urb->transfer_buffer_length;
+	unsigned	maxpacket;
+
+	switch (pattern) {
+	default:
+		fallthrough;
+	case 0:
+		memset(buf, 0, len);
+		break;
+	case 1:			/* mod63 */
+		maxpacket = get_maxpacket(urb->dev, urb->pipe);
+		for (i = 0; i < len; i++)
+			*buf++ = (u8) ((i % maxpacket) % 63);
+		break;
+	}
+}
+
+static inline unsigned long buffer_offset(void *buf)
+{
+	return (unsigned long)buf & (ARCH_KMALLOC_MINALIGN - 1);
+}
+
+static int check_guard_bytes(struct usbtest_dev *tdev, struct urb *urb)
+{
+	u8 *buf = urb->transfer_buffer;
+	u8 *guard = buf - buffer_offset(buf);
+	unsigned i;
+
+	for (i = 0; guard < buf; i++, guard++) {
+		if (*guard != GUARD_BYTE) {
+			ERROR(tdev, "guard byte[%d] %d (not %d)\n",
+				i, *guard, GUARD_BYTE);
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+static int simple_check_buf(struct usbtest_dev *tdev, struct urb *urb)
+{
+	unsigned	i;
+	u8		expected;
+	u8		*buf = urb->transfer_buffer;
+	unsigned	len = urb->actual_length;
+	unsigned	maxpacket = get_maxpacket(urb->dev, urb->pipe);
+
+	int ret = check_guard_bytes(tdev, urb);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < len; i++, buf++) {
+		switch (pattern) {
+		/* all-zeroes has no synchronization issues */
+		case 0:
+			expected = 0;
+			break;
+		/* mod63 stays in sync with short-terminated transfers,
+		 * or otherwise when host and gadget agree on how large
+		 * each usb transfer request should be.  resync is done
+		 * with set_interface or set_config.
+		 */
+		case 1:			/* mod63 */
+			expected = (i % maxpacket) % 63;
+			break;
+		/* always fail unsupported patterns */
+		default:
+			expected = !*buf;
+			break;
+		}
+		if (*buf == expected)
+			continue;
+		ERROR(tdev, "buf[%d] = %d (not %d)\n", i, *buf, expected);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void simple_free_urb(struct urb *urb)
+{
+	unsigned long offset = buffer_offset(urb->transfer_buffer);
+
+	if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
+		usb_free_coherent(
+			urb->dev,
+			urb->transfer_buffer_length + offset,
+			urb->transfer_buffer - offset,
+			urb->transfer_dma - offset);
+	else
+		kfree(urb->transfer_buffer - offset);
+	usb_free_urb(urb);
+}
+
+static int simple_io(
+	struct usbtest_dev	*tdev,
+	struct urb		*urb,
+	int			iterations,
+	int			vary,
+	int			expected,
+	const char		*label
+)
+{
+	struct usb_device	*udev = urb->dev;
+	int			max = urb->transfer_buffer_length;
+	struct completion	completion;
+	int			retval = 0;
+	unsigned long		expire;
+
+	urb->context = &completion;
+	while (retval == 0 && iterations-- > 0) {
+		init_completion(&completion);
+		if (usb_pipeout(urb->pipe)) {
+			simple_fill_buf(urb);
+			urb->transfer_flags |= URB_ZERO_PACKET;
+		}
+		retval = usb_submit_urb(urb, GFP_KERNEL);
+		if (retval != 0)
+			break;
+
+		expire = msecs_to_jiffies(SIMPLE_IO_TIMEOUT);
+		if (!wait_for_completion_timeout(&completion, expire)) {
+			usb_kill_urb(urb);
+			retval = (urb->status == -ENOENT ?
+				  -ETIMEDOUT : urb->status);
+		} else {
+			retval = urb->status;
+		}
+
+		urb->dev = udev;
+		if (retval == 0 && usb_pipein(urb->pipe))
+			retval = simple_check_buf(tdev, urb);
+
+		if (vary) {
+			int	len = urb->transfer_buffer_length;
+
+			len += vary;
+			len %= max;
+			if (len == 0)
+				len = (vary < max) ? vary : max;
+			urb->transfer_buffer_length = len;
+		}
+
+		/* FIXME if endpoint halted, clear halt (and log) */
+	}
+	urb->transfer_buffer_length = max;
+
+	if (expected != retval)
+		dev_err(&udev->dev,
+			"%s failed, iterations left %d, status %d (not %d)\n",
+				label, iterations, retval, expected);
+	return retval;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* We use scatterlist primitives to test queued I/O.
+ * Yes, this also tests the scatterlist primitives.
+ */
+
+static void free_sglist(struct scatterlist *sg, int nents)
+{
+	unsigned		i;
+
+	if (!sg)
+		return;
+	for (i = 0; i < nents; i++) {
+		if (!sg_page(&sg[i]))
+			continue;
+		kfree(sg_virt(&sg[i]));
+	}
+	kfree(sg);
+}
+
+static struct scatterlist *
+alloc_sglist(int nents, int max, int vary, struct usbtest_dev *dev, int pipe)
+{
+	struct scatterlist	*sg;
+	unsigned int		n_size = 0;
+	unsigned		i;
+	unsigned		size = max;
+	unsigned		maxpacket =
+		get_maxpacket(interface_to_usbdev(dev->intf), pipe);
+
+	if (max == 0)
+		return NULL;
+
+	sg = kmalloc_array(nents, sizeof(*sg), GFP_KERNEL);
+	if (!sg)
+		return NULL;
+	sg_init_table(sg, nents);
+
+	for (i = 0; i < nents; i++) {
+		char		*buf;
+		unsigned	j;
+
+		buf = kzalloc(size, GFP_KERNEL);
+		if (!buf) {
+			free_sglist(sg, i);
+			return NULL;
+		}
+
+		/* kmalloc pages are always physically contiguous! */
+		sg_set_buf(&sg[i], buf, size);
+
+		switch (pattern) {
+		case 0:
+			/* already zeroed */
+			break;
+		case 1:
+			for (j = 0; j < size; j++)
+				*buf++ = (u8) (((j + n_size) % maxpacket) % 63);
+			n_size += size;
+			break;
+		}
+
+		if (vary) {
+			size += vary;
+			size %= max;
+			if (size == 0)
+				size = (vary < max) ? vary : max;
+		}
+	}
+
+	return sg;
+}
+
+struct sg_timeout {
+	struct timer_list timer;
+	struct usb_sg_request *req;
+};
+
+static void sg_timeout(struct timer_list *t)
+{
+	struct sg_timeout *timeout = from_timer(timeout, t, timer);
+
+	usb_sg_cancel(timeout->req);
+}
+
+static int perform_sglist(
+	struct usbtest_dev	*tdev,
+	unsigned		iterations,
+	int			pipe,
+	struct usb_sg_request	*req,
+	struct scatterlist	*sg,
+	int			nents
+)
+{
+	struct usb_device	*udev = testdev_to_usbdev(tdev);
+	int			retval = 0;
+	struct sg_timeout	timeout = {
+		.req = req,
+	};
+
+	timer_setup_on_stack(&timeout.timer, sg_timeout, 0);
+
+	while (retval == 0 && iterations-- > 0) {
+		retval = usb_sg_init(req, udev, pipe,
+				(udev->speed == USB_SPEED_HIGH)
+					? (INTERRUPT_RATE << 3)
+					: INTERRUPT_RATE,
+				sg, nents, 0, GFP_KERNEL);
+
+		if (retval)
+			break;
+		mod_timer(&timeout.timer, jiffies +
+				msecs_to_jiffies(SIMPLE_IO_TIMEOUT));
+		usb_sg_wait(req);
+		if (!del_timer_sync(&timeout.timer))
+			retval = -ETIMEDOUT;
+		else
+			retval = req->status;
+		destroy_timer_on_stack(&timeout.timer);
+
+		/* FIXME check resulting data pattern */
+
+		/* FIXME if endpoint halted, clear halt (and log) */
+	}
+
+	/* FIXME for unlink or fault handling tests, don't report
+	 * failure if retval is as we expected ...
+	 */
+	if (retval)
+		ERROR(tdev, "perform_sglist failed, "
+				"iterations left %d, status %d\n",
+				iterations, retval);
+	return retval;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* unqueued control message testing
+ *
+ * there's a nice set of device functional requirements in chapter 9 of the
+ * usb 2.0 spec, which we can apply to ANY device, even ones that don't use
+ * special test firmware.
+ *
+ * we know the device is configured (or suspended) by the time it's visible
+ * through usbfs.  we can't change that, so we won't test enumeration (which
+ * worked 'well enough' to get here, this time), power management (ditto),
+ * or remote wakeup (which needs human interaction).
+ */
+
+static unsigned realworld = 1;
+module_param(realworld, uint, 0);
+MODULE_PARM_DESC(realworld, "clear to demand stricter spec compliance");
+
+static int get_altsetting(struct usbtest_dev *dev)
+{
+	struct usb_interface	*iface = dev->intf;
+	struct usb_device	*udev = interface_to_usbdev(iface);
+	int			retval;
+
+	retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			USB_REQ_GET_INTERFACE, USB_DIR_IN|USB_RECIP_INTERFACE,
+			0, iface->altsetting[0].desc.bInterfaceNumber,
+			dev->buf, 1, USB_CTRL_GET_TIMEOUT);
+	switch (retval) {
+	case 1:
+		return dev->buf[0];
+	case 0:
+		retval = -ERANGE;
+		fallthrough;
+	default:
+		return retval;
+	}
+}
+
+static int set_altsetting(struct usbtest_dev *dev, int alternate)
+{
+	struct usb_interface		*iface = dev->intf;
+	struct usb_device		*udev;
+
+	if (alternate < 0 || alternate >= 256)
+		return -EINVAL;
+
+	udev = interface_to_usbdev(iface);
+	return usb_set_interface(udev,
+			iface->altsetting[0].desc.bInterfaceNumber,
+			alternate);
+}
+
+static int is_good_config(struct usbtest_dev *tdev, int len)
+{
+	struct usb_config_descriptor	*config;
+
+	if (len < sizeof(*config))
+		return 0;
+	config = (struct usb_config_descriptor *) tdev->buf;
+
+	switch (config->bDescriptorType) {
+	case USB_DT_CONFIG:
+	case USB_DT_OTHER_SPEED_CONFIG:
+		if (config->bLength != 9) {
+			ERROR(tdev, "bogus config descriptor length\n");
+			return 0;
+		}
+		/* this bit 'must be 1' but often isn't */
+		if (!realworld && !(config->bmAttributes & 0x80)) {
+			ERROR(tdev, "high bit of config attributes not set\n");
+			return 0;
+		}
+		if (config->bmAttributes & 0x1f) {	/* reserved == 0 */
+			ERROR(tdev, "reserved config bits set\n");
+			return 0;
+		}
+		break;
+	default:
+		return 0;
+	}
+
+	if (le16_to_cpu(config->wTotalLength) == len)	/* read it all */
+		return 1;
+	if (le16_to_cpu(config->wTotalLength) >= TBUF_SIZE)	/* max partial read */
+		return 1;
+	ERROR(tdev, "bogus config descriptor read size\n");
+	return 0;
+}
+
+static int is_good_ext(struct usbtest_dev *tdev, u8 *buf)
+{
+	struct usb_ext_cap_descriptor *ext;
+	u32 attr;
+
+	ext = (struct usb_ext_cap_descriptor *) buf;
+
+	if (ext->bLength != USB_DT_USB_EXT_CAP_SIZE) {
+		ERROR(tdev, "bogus usb 2.0 extension descriptor length\n");
+		return 0;
+	}
+
+	attr = le32_to_cpu(ext->bmAttributes);
+	/* bits[1:15] is used and others are reserved */
+	if (attr & ~0xfffe) {	/* reserved == 0 */
+		ERROR(tdev, "reserved bits set\n");
+		return 0;
+	}
+
+	return 1;
+}
+
+static int is_good_ss_cap(struct usbtest_dev *tdev, u8 *buf)
+{
+	struct usb_ss_cap_descriptor *ss;
+
+	ss = (struct usb_ss_cap_descriptor *) buf;
+
+	if (ss->bLength != USB_DT_USB_SS_CAP_SIZE) {
+		ERROR(tdev, "bogus superspeed device capability descriptor length\n");
+		return 0;
+	}
+
+	/*
+	 * only bit[1] of bmAttributes is used for LTM and others are
+	 * reserved
+	 */
+	if (ss->bmAttributes & ~0x02) {	/* reserved == 0 */
+		ERROR(tdev, "reserved bits set in bmAttributes\n");
+		return 0;
+	}
+
+	/* bits[0:3] of wSpeedSupported is used and others are reserved */
+	if (le16_to_cpu(ss->wSpeedSupported) & ~0x0f) {	/* reserved == 0 */
+		ERROR(tdev, "reserved bits set in wSpeedSupported\n");
+		return 0;
+	}
+
+	return 1;
+}
+
+static int is_good_con_id(struct usbtest_dev *tdev, u8 *buf)
+{
+	struct usb_ss_container_id_descriptor *con_id;
+
+	con_id = (struct usb_ss_container_id_descriptor *) buf;
+
+	if (con_id->bLength != USB_DT_USB_SS_CONTN_ID_SIZE) {
+		ERROR(tdev, "bogus container id descriptor length\n");
+		return 0;
+	}
+
+	if (con_id->bReserved) {	/* reserved == 0 */
+		ERROR(tdev, "reserved bits set\n");
+		return 0;
+	}
+
+	return 1;
+}
+
+/* sanity test for standard requests working with usb_control_mesg() and some
+ * of the utility functions which use it.
+ *
+ * this doesn't test how endpoint halts behave or data toggles get set, since
+ * we won't do I/O to bulk/interrupt endpoints here (which is how to change
+ * halt or toggle).  toggle testing is impractical without support from hcds.
+ *
+ * this avoids failing devices linux would normally work with, by not testing
+ * config/altsetting operations for devices that only support their defaults.
+ * such devices rarely support those needless operations.
+ *
+ * NOTE that since this is a sanity test, it's not examining boundary cases
+ * to see if usbcore, hcd, and device all behave right.  such testing would
+ * involve varied read sizes and other operation sequences.
+ */
+static int ch9_postconfig(struct usbtest_dev *dev)
+{
+	struct usb_interface	*iface = dev->intf;
+	struct usb_device	*udev = interface_to_usbdev(iface);
+	int			i, alt, retval;
+
+	/* [9.2.3] if there's more than one altsetting, we need to be able to
+	 * set and get each one.  mostly trusts the descriptors from usbcore.
+	 */
+	for (i = 0; i < iface->num_altsetting; i++) {
+
+		/* 9.2.3 constrains the range here */
+		alt = iface->altsetting[i].desc.bAlternateSetting;
+		if (alt < 0 || alt >= iface->num_altsetting) {
+			dev_err(&iface->dev,
+					"invalid alt [%d].bAltSetting = %d\n",
+					i, alt);
+		}
+
+		/* [real world] get/set unimplemented if there's only one */
+		if (realworld && iface->num_altsetting == 1)
+			continue;
+
+		/* [9.4.10] set_interface */
+		retval = set_altsetting(dev, alt);
+		if (retval) {
+			dev_err(&iface->dev, "can't set_interface = %d, %d\n",
+					alt, retval);
+			return retval;
+		}
+
+		/* [9.4.4] get_interface always works */
+		retval = get_altsetting(dev);
+		if (retval != alt) {
+			dev_err(&iface->dev, "get alt should be %d, was %d\n",
+					alt, retval);
+			return (retval < 0) ? retval : -EDOM;
+		}
+
+	}
+
+	/* [real world] get_config unimplemented if there's only one */
+	if (!realworld || udev->descriptor.bNumConfigurations != 1) {
+		int	expected = udev->actconfig->desc.bConfigurationValue;
+
+		/* [9.4.2] get_configuration always works
+		 * ... although some cheap devices (like one TI Hub I've got)
+		 * won't return config descriptors except before set_config.
+		 */
+		retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+				USB_REQ_GET_CONFIGURATION,
+				USB_DIR_IN | USB_RECIP_DEVICE,
+				0, 0, dev->buf, 1, USB_CTRL_GET_TIMEOUT);
+		if (retval != 1 || dev->buf[0] != expected) {
+			dev_err(&iface->dev, "get config --> %d %d (1 %d)\n",
+				retval, dev->buf[0], expected);
+			return (retval < 0) ? retval : -EDOM;
+		}
+	}
+
+	/* there's always [9.4.3] a device descriptor [9.6.1] */
+	retval = usb_get_descriptor(udev, USB_DT_DEVICE, 0,
+			dev->buf, sizeof(udev->descriptor));
+	if (retval != sizeof(udev->descriptor)) {
+		dev_err(&iface->dev, "dev descriptor --> %d\n", retval);
+		return (retval < 0) ? retval : -EDOM;
+	}
+
+	/*
+	 * there's always [9.4.3] a bos device descriptor [9.6.2] in USB
+	 * 3.0 spec
+	 */
+	if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0210) {
+		struct usb_bos_descriptor *bos = NULL;
+		struct usb_dev_cap_header *header = NULL;
+		unsigned total, num, length;
+		u8 *buf;
+
+		retval = usb_get_descriptor(udev, USB_DT_BOS, 0, dev->buf,
+				sizeof(*udev->bos->desc));
+		if (retval != sizeof(*udev->bos->desc)) {
+			dev_err(&iface->dev, "bos descriptor --> %d\n", retval);
+			return (retval < 0) ? retval : -EDOM;
+		}
+
+		bos = (struct usb_bos_descriptor *)dev->buf;
+		total = le16_to_cpu(bos->wTotalLength);
+		num = bos->bNumDeviceCaps;
+
+		if (total > TBUF_SIZE)
+			total = TBUF_SIZE;
+
+		/*
+		 * get generic device-level capability descriptors [9.6.2]
+		 * in USB 3.0 spec
+		 */
+		retval = usb_get_descriptor(udev, USB_DT_BOS, 0, dev->buf,
+				total);
+		if (retval != total) {
+			dev_err(&iface->dev, "bos descriptor set --> %d\n",
+					retval);
+			return (retval < 0) ? retval : -EDOM;
+		}
+
+		length = sizeof(*udev->bos->desc);
+		buf = dev->buf;
+		for (i = 0; i < num; i++) {
+			buf += length;
+			if (buf + sizeof(struct usb_dev_cap_header) >
+					dev->buf + total)
+				break;
+
+			header = (struct usb_dev_cap_header *)buf;
+			length = header->bLength;
+
+			if (header->bDescriptorType !=
+					USB_DT_DEVICE_CAPABILITY) {
+				dev_warn(&udev->dev, "not device capability descriptor, skip\n");
+				continue;
+			}
+
+			switch (header->bDevCapabilityType) {
+			case USB_CAP_TYPE_EXT:
+				if (buf + USB_DT_USB_EXT_CAP_SIZE >
+						dev->buf + total ||
+						!is_good_ext(dev, buf)) {
+					dev_err(&iface->dev, "bogus usb 2.0 extension descriptor\n");
+					return -EDOM;
+				}
+				break;
+			case USB_SS_CAP_TYPE:
+				if (buf + USB_DT_USB_SS_CAP_SIZE >
+						dev->buf + total ||
+						!is_good_ss_cap(dev, buf)) {
+					dev_err(&iface->dev, "bogus superspeed device capability descriptor\n");
+					return -EDOM;
+				}
+				break;
+			case CONTAINER_ID_TYPE:
+				if (buf + USB_DT_USB_SS_CONTN_ID_SIZE >
+						dev->buf + total ||
+						!is_good_con_id(dev, buf)) {
+					dev_err(&iface->dev, "bogus container id descriptor\n");
+					return -EDOM;
+				}
+				break;
+			default:
+				break;
+			}
+		}
+	}
+
+	/* there's always [9.4.3] at least one config descriptor [9.6.3] */
+	for (i = 0; i < udev->descriptor.bNumConfigurations; i++) {
+		retval = usb_get_descriptor(udev, USB_DT_CONFIG, i,
+				dev->buf, TBUF_SIZE);
+		if (!is_good_config(dev, retval)) {
+			dev_err(&iface->dev,
+					"config [%d] descriptor --> %d\n",
+					i, retval);
+			return (retval < 0) ? retval : -EDOM;
+		}
+
+		/* FIXME cross-checking udev->config[i] to make sure usbcore
+		 * parsed it right (etc) would be good testing paranoia
+		 */
+	}
+
+	/* and sometimes [9.2.6.6] speed dependent descriptors */
+	if (le16_to_cpu(udev->descriptor.bcdUSB) == 0x0200) {
+		struct usb_qualifier_descriptor *d = NULL;
+
+		/* device qualifier [9.6.2] */
+		retval = usb_get_descriptor(udev,
+				USB_DT_DEVICE_QUALIFIER, 0, dev->buf,
+				sizeof(struct usb_qualifier_descriptor));
+		if (retval == -EPIPE) {
+			if (udev->speed == USB_SPEED_HIGH) {
+				dev_err(&iface->dev,
+						"hs dev qualifier --> %d\n",
+						retval);
+				return retval;
+			}
+			/* usb2.0 but not high-speed capable; fine */
+		} else if (retval != sizeof(struct usb_qualifier_descriptor)) {
+			dev_err(&iface->dev, "dev qualifier --> %d\n", retval);
+			return (retval < 0) ? retval : -EDOM;
+		} else
+			d = (struct usb_qualifier_descriptor *) dev->buf;
+
+		/* might not have [9.6.2] any other-speed configs [9.6.4] */
+		if (d) {
+			unsigned max = d->bNumConfigurations;
+			for (i = 0; i < max; i++) {
+				retval = usb_get_descriptor(udev,
+					USB_DT_OTHER_SPEED_CONFIG, i,
+					dev->buf, TBUF_SIZE);
+				if (!is_good_config(dev, retval)) {
+					dev_err(&iface->dev,
+						"other speed config --> %d\n",
+						retval);
+					return (retval < 0) ? retval : -EDOM;
+				}
+			}
+		}
+	}
+	/* FIXME fetch strings from at least the device descriptor */
+
+	/* [9.4.5] get_status always works */
+	retval = usb_get_std_status(udev, USB_RECIP_DEVICE, 0, dev->buf);
+	if (retval) {
+		dev_err(&iface->dev, "get dev status --> %d\n", retval);
+		return retval;
+	}
+
+	/* FIXME configuration.bmAttributes says if we could try to set/clear
+	 * the device's remote wakeup feature ... if we can, test that here
+	 */
+
+	retval = usb_get_std_status(udev, USB_RECIP_INTERFACE,
+			iface->altsetting[0].desc.bInterfaceNumber, dev->buf);
+	if (retval) {
+		dev_err(&iface->dev, "get interface status --> %d\n", retval);
+		return retval;
+	}
+	/* FIXME get status for each endpoint in the interface */
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* use ch9 requests to test whether:
+ *   (a) queues work for control, keeping N subtests queued and
+ *       active (auto-resubmit) for M loops through the queue.
+ *   (b) protocol stalls (control-only) will autorecover.
+ *       it's not like bulk/intr; no halt clearing.
+ *   (c) short control reads are reported and handled.
+ *   (d) queues are always processed in-order
+ */
+
+struct ctrl_ctx {
+	spinlock_t		lock;
+	struct usbtest_dev	*dev;
+	struct completion	complete;
+	unsigned		count;
+	unsigned		pending;
+	int			status;
+	struct urb		**urb;
+	struct usbtest_param_32	*param;
+	int			last;
+};
+
+#define NUM_SUBCASES	16		/* how many test subcases here? */
+
+struct subcase {
+	struct usb_ctrlrequest	setup;
+	int			number;
+	int			expected;
+};
+
+static void ctrl_complete(struct urb *urb)
+{
+	struct ctrl_ctx		*ctx = urb->context;
+	struct usb_ctrlrequest	*reqp;
+	struct subcase		*subcase;
+	int			status = urb->status;
+	unsigned long		flags;
+
+	reqp = (struct usb_ctrlrequest *)urb->setup_packet;
+	subcase = container_of(reqp, struct subcase, setup);
+
+	spin_lock_irqsave(&ctx->lock, flags);
+	ctx->count--;
+	ctx->pending--;
+
+	/* queue must transfer and complete in fifo order, unless
+	 * usb_unlink_urb() is used to unlink something not at the
+	 * physical queue head (not tested).
+	 */
+	if (subcase->number > 0) {
+		if ((subcase->number - ctx->last) != 1) {
+			ERROR(ctx->dev,
+				"subcase %d completed out of order, last %d\n",
+				subcase->number, ctx->last);
+			status = -EDOM;
+			ctx->last = subcase->number;
+			goto error;
+		}
+	}
+	ctx->last = subcase->number;
+
+	/* succeed or fault in only one way? */
+	if (status == subcase->expected)
+		status = 0;
+
+	/* async unlink for cleanup? */
+	else if (status != -ECONNRESET) {
+
+		/* some faults are allowed, not required */
+		if (subcase->expected > 0 && (
+			  ((status == -subcase->expected	/* happened */
+			   || status == 0))))			/* didn't */
+			status = 0;
+		/* sometimes more than one fault is allowed */
+		else if (subcase->number == 12 && status == -EPIPE)
+			status = 0;
+		else
+			ERROR(ctx->dev, "subtest %d error, status %d\n",
+					subcase->number, status);
+	}
+
+	/* unexpected status codes mean errors; ideally, in hardware */
+	if (status) {
+error:
+		if (ctx->status == 0) {
+			int		i;
+
+			ctx->status = status;
+			ERROR(ctx->dev, "control queue %02x.%02x, err %d, "
+					"%d left, subcase %d, len %d/%d\n",
+					reqp->bRequestType, reqp->bRequest,
+					status, ctx->count, subcase->number,
+					urb->actual_length,
+					urb->transfer_buffer_length);
+
+			/* FIXME this "unlink everything" exit route should
+			 * be a separate test case.
+			 */
+
+			/* unlink whatever's still pending */
+			for (i = 1; i < ctx->param->sglen; i++) {
+				struct urb *u = ctx->urb[
+							(i + subcase->number)
+							% ctx->param->sglen];
+
+				if (u == urb || !u->dev)
+					continue;
+				spin_unlock(&ctx->lock);
+				status = usb_unlink_urb(u);
+				spin_lock(&ctx->lock);
+				switch (status) {
+				case -EINPROGRESS:
+				case -EBUSY:
+				case -EIDRM:
+					continue;
+				default:
+					ERROR(ctx->dev, "urb unlink --> %d\n",
+							status);
+				}
+			}
+			status = ctx->status;
+		}
+	}
+
+	/* resubmit if we need to, else mark this as done */
+	if ((status == 0) && (ctx->pending < ctx->count)) {
+		status = usb_submit_urb(urb, GFP_ATOMIC);
+		if (status != 0) {
+			ERROR(ctx->dev,
+				"can't resubmit ctrl %02x.%02x, err %d\n",
+				reqp->bRequestType, reqp->bRequest, status);
+			urb->dev = NULL;
+		} else
+			ctx->pending++;
+	} else
+		urb->dev = NULL;
+
+	/* signal completion when nothing's queued */
+	if (ctx->pending == 0)
+		complete(&ctx->complete);
+	spin_unlock_irqrestore(&ctx->lock, flags);
+}
+
+static int
+test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param_32 *param)
+{
+	struct usb_device	*udev = testdev_to_usbdev(dev);
+	struct urb		**urb;
+	struct ctrl_ctx		context;
+	int			i;
+
+	if (param->sglen == 0 || param->iterations > UINT_MAX / param->sglen)
+		return -EOPNOTSUPP;
+
+	spin_lock_init(&context.lock);
+	context.dev = dev;
+	init_completion(&context.complete);
+	context.count = param->sglen * param->iterations;
+	context.pending = 0;
+	context.status = -ENOMEM;
+	context.param = param;
+	context.last = -1;
+
+	/* allocate and init the urbs we'll queue.
+	 * as with bulk/intr sglists, sglen is the queue depth; it also
+	 * controls which subtests run (more tests than sglen) or rerun.
+	 */
+	urb = kcalloc(param->sglen, sizeof(struct urb *), GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+	for (i = 0; i < param->sglen; i++) {
+		int			pipe = usb_rcvctrlpipe(udev, 0);
+		unsigned		len;
+		struct urb		*u;
+		struct usb_ctrlrequest	req;
+		struct subcase		*reqp;
+
+		/* sign of this variable means:
+		 *  -: tested code must return this (negative) error code
+		 *  +: tested code may return this (negative too) error code
+		 */
+		int			expected = 0;
+
+		/* requests here are mostly expected to succeed on any
+		 * device, but some are chosen to trigger protocol stalls
+		 * or short reads.
+		 */
+		memset(&req, 0, sizeof(req));
+		req.bRequest = USB_REQ_GET_DESCRIPTOR;
+		req.bRequestType = USB_DIR_IN|USB_RECIP_DEVICE;
+
+		switch (i % NUM_SUBCASES) {
+		case 0:		/* get device descriptor */
+			req.wValue = cpu_to_le16(USB_DT_DEVICE << 8);
+			len = sizeof(struct usb_device_descriptor);
+			break;
+		case 1:		/* get first config descriptor (only) */
+			req.wValue = cpu_to_le16((USB_DT_CONFIG << 8) | 0);
+			len = sizeof(struct usb_config_descriptor);
+			break;
+		case 2:		/* get altsetting (OFTEN STALLS) */
+			req.bRequest = USB_REQ_GET_INTERFACE;
+			req.bRequestType = USB_DIR_IN|USB_RECIP_INTERFACE;
+			/* index = 0 means first interface */
+			len = 1;
+			expected = EPIPE;
+			break;
+		case 3:		/* get interface status */
+			req.bRequest = USB_REQ_GET_STATUS;
+			req.bRequestType = USB_DIR_IN|USB_RECIP_INTERFACE;
+			/* interface 0 */
+			len = 2;
+			break;
+		case 4:		/* get device status */
+			req.bRequest = USB_REQ_GET_STATUS;
+			req.bRequestType = USB_DIR_IN|USB_RECIP_DEVICE;
+			len = 2;
+			break;
+		case 5:		/* get device qualifier (MAY STALL) */
+			req.wValue = cpu_to_le16 (USB_DT_DEVICE_QUALIFIER << 8);
+			len = sizeof(struct usb_qualifier_descriptor);
+			if (udev->speed != USB_SPEED_HIGH)
+				expected = EPIPE;
+			break;
+		case 6:		/* get first config descriptor, plus interface */
+			req.wValue = cpu_to_le16((USB_DT_CONFIG << 8) | 0);
+			len = sizeof(struct usb_config_descriptor);
+			len += sizeof(struct usb_interface_descriptor);
+			break;
+		case 7:		/* get interface descriptor (ALWAYS STALLS) */
+			req.wValue = cpu_to_le16 (USB_DT_INTERFACE << 8);
+			/* interface == 0 */
+			len = sizeof(struct usb_interface_descriptor);
+			expected = -EPIPE;
+			break;
+		/* NOTE: two consecutive stalls in the queue here.
+		 *  that tests fault recovery a bit more aggressively. */
+		case 8:		/* clear endpoint halt (MAY STALL) */
+			req.bRequest = USB_REQ_CLEAR_FEATURE;
+			req.bRequestType = USB_RECIP_ENDPOINT;
+			/* wValue 0 == ep halt */
+			/* wIndex 0 == ep0 (shouldn't halt!) */
+			len = 0;
+			pipe = usb_sndctrlpipe(udev, 0);
+			expected = EPIPE;
+			break;
+		case 9:		/* get endpoint status */
+			req.bRequest = USB_REQ_GET_STATUS;
+			req.bRequestType = USB_DIR_IN|USB_RECIP_ENDPOINT;
+			/* endpoint 0 */
+			len = 2;
+			break;
+		case 10:	/* trigger short read (EREMOTEIO) */
+			req.wValue = cpu_to_le16((USB_DT_CONFIG << 8) | 0);
+			len = 1024;
+			expected = -EREMOTEIO;
+			break;
+		/* NOTE: two consecutive _different_ faults in the queue. */
+		case 11:	/* get endpoint descriptor (ALWAYS STALLS) */
+			req.wValue = cpu_to_le16(USB_DT_ENDPOINT << 8);
+			/* endpoint == 0 */
+			len = sizeof(struct usb_interface_descriptor);
+			expected = EPIPE;
+			break;
+		/* NOTE: sometimes even a third fault in the queue! */
+		case 12:	/* get string 0 descriptor (MAY STALL) */
+			req.wValue = cpu_to_le16(USB_DT_STRING << 8);
+			/* string == 0, for language IDs */
+			len = sizeof(struct usb_interface_descriptor);
+			/* may succeed when > 4 languages */
+			expected = EREMOTEIO;	/* or EPIPE, if no strings */
+			break;
+		case 13:	/* short read, resembling case 10 */
+			req.wValue = cpu_to_le16((USB_DT_CONFIG << 8) | 0);
+			/* last data packet "should" be DATA1, not DATA0 */
+			if (udev->speed == USB_SPEED_SUPER)
+				len = 1024 - 512;
+			else
+				len = 1024 - udev->descriptor.bMaxPacketSize0;
+			expected = -EREMOTEIO;
+			break;
+		case 14:	/* short read; try to fill the last packet */
+			req.wValue = cpu_to_le16((USB_DT_DEVICE << 8) | 0);
+			/* device descriptor size == 18 bytes */
+			len = udev->descriptor.bMaxPacketSize0;
+			if (udev->speed == USB_SPEED_SUPER)
+				len = 512;
+			switch (len) {
+			case 8:
+				len = 24;
+				break;
+			case 16:
+				len = 32;
+				break;
+			}
+			expected = -EREMOTEIO;
+			break;
+		case 15:
+			req.wValue = cpu_to_le16(USB_DT_BOS << 8);
+			if (udev->bos)
+				len = le16_to_cpu(udev->bos->desc->wTotalLength);
+			else
+				len = sizeof(struct usb_bos_descriptor);
+			if (le16_to_cpu(udev->descriptor.bcdUSB) < 0x0201)
+				expected = -EPIPE;
+			break;
+		default:
+			ERROR(dev, "bogus number of ctrl queue testcases!\n");
+			context.status = -EINVAL;
+			goto cleanup;
+		}
+		req.wLength = cpu_to_le16(len);
+		urb[i] = u = simple_alloc_urb(udev, pipe, len, 0);
+		if (!u)
+			goto cleanup;
+
+		reqp = kmalloc(sizeof(*reqp), GFP_KERNEL);
+		if (!reqp)
+			goto cleanup;
+		reqp->setup = req;
+		reqp->number = i % NUM_SUBCASES;
+		reqp->expected = expected;
+		u->setup_packet = (char *) &reqp->setup;
+
+		u->context = &context;
+		u->complete = ctrl_complete;
+	}
+
+	/* queue the urbs */
+	context.urb = urb;
+	spin_lock_irq(&context.lock);
+	for (i = 0; i < param->sglen; i++) {
+		context.status = usb_submit_urb(urb[i], GFP_ATOMIC);
+		if (context.status != 0) {
+			ERROR(dev, "can't submit urb[%d], status %d\n",
+					i, context.status);
+			context.count = context.pending;
+			break;
+		}
+		context.pending++;
+	}
+	spin_unlock_irq(&context.lock);
+
+	/* FIXME  set timer and time out; provide a disconnect hook */
+
+	/* wait for the last one to complete */
+	if (context.pending > 0)
+		wait_for_completion(&context.complete);
+
+cleanup:
+	for (i = 0; i < param->sglen; i++) {
+		if (!urb[i])
+			continue;
+		urb[i]->dev = udev;
+		kfree(urb[i]->setup_packet);
+		simple_free_urb(urb[i]);
+	}
+	kfree(urb);
+	return context.status;
+}
+#undef NUM_SUBCASES
+
+
+/*-------------------------------------------------------------------------*/
+
+static void unlink1_callback(struct urb *urb)
+{
+	int	status = urb->status;
+
+	/* we "know" -EPIPE (stall) never happens */
+	if (!status)
+		status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status) {
+		urb->status = status;
+		complete(urb->context);
+	}
+}
+
+static int unlink1(struct usbtest_dev *dev, int pipe, int size, int async)
+{
+	struct urb		*urb;
+	struct completion	completion;
+	int			retval = 0;
+
+	init_completion(&completion);
+	urb = simple_alloc_urb(testdev_to_usbdev(dev), pipe, size, 0);
+	if (!urb)
+		return -ENOMEM;
+	urb->context = &completion;
+	urb->complete = unlink1_callback;
+
+	if (usb_pipeout(urb->pipe)) {
+		simple_fill_buf(urb);
+		urb->transfer_flags |= URB_ZERO_PACKET;
+	}
+
+	/* keep the endpoint busy.  there are lots of hc/hcd-internal
+	 * states, and testing should get to all of them over time.
+	 *
+	 * FIXME want additional tests for when endpoint is STALLing
+	 * due to errors, or is just NAKing requests.
+	 */
+	retval = usb_submit_urb(urb, GFP_KERNEL);
+	if (retval != 0) {
+		dev_err(&dev->intf->dev, "submit fail %d\n", retval);
+		return retval;
+	}
+
+	/* unlinking that should always work.  variable delay tests more
+	 * hcd states and code paths, even with little other system load.
+	 */
+	msleep(jiffies % (2 * INTERRUPT_RATE));
+	if (async) {
+		while (!completion_done(&completion)) {
+			retval = usb_unlink_urb(urb);
+
+			if (retval == 0 && usb_pipein(urb->pipe))
+				retval = simple_check_buf(dev, urb);
+
+			switch (retval) {
+			case -EBUSY:
+			case -EIDRM:
+				/* we can't unlink urbs while they're completing
+				 * or if they've completed, and we haven't
+				 * resubmitted. "normal" drivers would prevent
+				 * resubmission, but since we're testing unlink
+				 * paths, we can't.
+				 */
+				ERROR(dev, "unlink retry\n");
+				continue;
+			case 0:
+			case -EINPROGRESS:
+				break;
+
+			default:
+				dev_err(&dev->intf->dev,
+					"unlink fail %d\n", retval);
+				return retval;
+			}
+
+			break;
+		}
+	} else
+		usb_kill_urb(urb);
+
+	wait_for_completion(&completion);
+	retval = urb->status;
+	simple_free_urb(urb);
+
+	if (async)
+		return (retval == -ECONNRESET) ? 0 : retval - 1000;
+	else
+		return (retval == -ENOENT || retval == -EPERM) ?
+				0 : retval - 2000;
+}
+
+static int unlink_simple(struct usbtest_dev *dev, int pipe, int len)
+{
+	int			retval = 0;
+
+	/* test sync and async paths */
+	retval = unlink1(dev, pipe, len, 1);
+	if (!retval)
+		retval = unlink1(dev, pipe, len, 0);
+	return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+struct queued_ctx {
+	struct completion	complete;
+	atomic_t		pending;
+	unsigned		num;
+	int			status;
+	struct urb		**urbs;
+};
+
+static void unlink_queued_callback(struct urb *urb)
+{
+	int			status = urb->status;
+	struct queued_ctx	*ctx = urb->context;
+
+	if (ctx->status)
+		goto done;
+	if (urb == ctx->urbs[ctx->num - 4] || urb == ctx->urbs[ctx->num - 2]) {
+		if (status == -ECONNRESET)
+			goto done;
+		/* What error should we report if the URB completed normally? */
+	}
+	if (status != 0)
+		ctx->status = status;
+
+ done:
+	if (atomic_dec_and_test(&ctx->pending))
+		complete(&ctx->complete);
+}
+
+static int unlink_queued(struct usbtest_dev *dev, int pipe, unsigned num,
+		unsigned size)
+{
+	struct queued_ctx	ctx;
+	struct usb_device	*udev = testdev_to_usbdev(dev);
+	void			*buf;
+	dma_addr_t		buf_dma;
+	int			i;
+	int			retval = -ENOMEM;
+
+	init_completion(&ctx.complete);
+	atomic_set(&ctx.pending, 1);	/* One more than the actual value */
+	ctx.num = num;
+	ctx.status = 0;
+
+	buf = usb_alloc_coherent(udev, size, GFP_KERNEL, &buf_dma);
+	if (!buf)
+		return retval;
+	memset(buf, 0, size);
+
+	/* Allocate and init the urbs we'll queue */
+	ctx.urbs = kcalloc(num, sizeof(struct urb *), GFP_KERNEL);
+	if (!ctx.urbs)
+		goto free_buf;
+	for (i = 0; i < num; i++) {
+		ctx.urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
+		if (!ctx.urbs[i])
+			goto free_urbs;
+		usb_fill_bulk_urb(ctx.urbs[i], udev, pipe, buf, size,
+				unlink_queued_callback, &ctx);
+		ctx.urbs[i]->transfer_dma = buf_dma;
+		ctx.urbs[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+
+		if (usb_pipeout(ctx.urbs[i]->pipe)) {
+			simple_fill_buf(ctx.urbs[i]);
+			ctx.urbs[i]->transfer_flags |= URB_ZERO_PACKET;
+		}
+	}
+
+	/* Submit all the URBs and then unlink URBs num - 4 and num - 2. */
+	for (i = 0; i < num; i++) {
+		atomic_inc(&ctx.pending);
+		retval = usb_submit_urb(ctx.urbs[i], GFP_KERNEL);
+		if (retval != 0) {
+			dev_err(&dev->intf->dev, "submit urbs[%d] fail %d\n",
+					i, retval);
+			atomic_dec(&ctx.pending);
+			ctx.status = retval;
+			break;
+		}
+	}
+	if (i == num) {
+		usb_unlink_urb(ctx.urbs[num - 4]);
+		usb_unlink_urb(ctx.urbs[num - 2]);
+	} else {
+		while (--i >= 0)
+			usb_unlink_urb(ctx.urbs[i]);
+	}
+
+	if (atomic_dec_and_test(&ctx.pending))		/* The extra count */
+		complete(&ctx.complete);
+	wait_for_completion(&ctx.complete);
+	retval = ctx.status;
+
+ free_urbs:
+	for (i = 0; i < num; i++)
+		usb_free_urb(ctx.urbs[i]);
+	kfree(ctx.urbs);
+ free_buf:
+	usb_free_coherent(udev, size, buf, buf_dma);
+	return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int verify_not_halted(struct usbtest_dev *tdev, int ep, struct urb *urb)
+{
+	int	retval;
+	u16	status;
+
+	/* shouldn't look or act halted */
+	retval = usb_get_std_status(urb->dev, USB_RECIP_ENDPOINT, ep, &status);
+	if (retval < 0) {
+		ERROR(tdev, "ep %02x couldn't get no-halt status, %d\n",
+				ep, retval);
+		return retval;
+	}
+	if (status != 0) {
+		ERROR(tdev, "ep %02x bogus status: %04x != 0\n", ep, status);
+		return -EINVAL;
+	}
+	retval = simple_io(tdev, urb, 1, 0, 0, __func__);
+	if (retval != 0)
+		return -EINVAL;
+	return 0;
+}
+
+static int verify_halted(struct usbtest_dev *tdev, int ep, struct urb *urb)
+{
+	int	retval;
+	u16	status;
+
+	/* should look and act halted */
+	retval = usb_get_std_status(urb->dev, USB_RECIP_ENDPOINT, ep, &status);
+	if (retval < 0) {
+		ERROR(tdev, "ep %02x couldn't get halt status, %d\n",
+				ep, retval);
+		return retval;
+	}
+	if (status != 1) {
+		ERROR(tdev, "ep %02x bogus status: %04x != 1\n", ep, status);
+		return -EINVAL;
+	}
+	retval = simple_io(tdev, urb, 1, 0, -EPIPE, __func__);
+	if (retval != -EPIPE)
+		return -EINVAL;
+	retval = simple_io(tdev, urb, 1, 0, -EPIPE, "verify_still_halted");
+	if (retval != -EPIPE)
+		return -EINVAL;
+	return 0;
+}
+
+static int test_halt(struct usbtest_dev *tdev, int ep, struct urb *urb)
+{
+	int	retval;
+
+	/* shouldn't look or act halted now */
+	retval = verify_not_halted(tdev, ep, urb);
+	if (retval < 0)
+		return retval;
+
+	/* set halt (protocol test only), verify it worked */
+	retval = usb_control_msg(urb->dev, usb_sndctrlpipe(urb->dev, 0),
+			USB_REQ_SET_FEATURE, USB_RECIP_ENDPOINT,
+			USB_ENDPOINT_HALT, ep,
+			NULL, 0, USB_CTRL_SET_TIMEOUT);
+	if (retval < 0) {
+		ERROR(tdev, "ep %02x couldn't set halt, %d\n", ep, retval);
+		return retval;
+	}
+	retval = verify_halted(tdev, ep, urb);
+	if (retval < 0) {
+		int ret;
+
+		/* clear halt anyways, else further tests will fail */
+		ret = usb_clear_halt(urb->dev, urb->pipe);
+		if (ret)
+			ERROR(tdev, "ep %02x couldn't clear halt, %d\n",
+			      ep, ret);
+
+		return retval;
+	}
+
+	/* clear halt (tests API + protocol), verify it worked */
+	retval = usb_clear_halt(urb->dev, urb->pipe);
+	if (retval < 0) {
+		ERROR(tdev, "ep %02x couldn't clear halt, %d\n", ep, retval);
+		return retval;
+	}
+	retval = verify_not_halted(tdev, ep, urb);
+	if (retval < 0)
+		return retval;
+
+	/* NOTE:  could also verify SET_INTERFACE clear halts ... */
+
+	return 0;
+}
+
+static int test_toggle_sync(struct usbtest_dev *tdev, int ep, struct urb *urb)
+{
+	int	retval;
+
+	/* clear initial data toggle to DATA0 */
+	retval = usb_clear_halt(urb->dev, urb->pipe);
+	if (retval < 0) {
+		ERROR(tdev, "ep %02x couldn't clear halt, %d\n", ep, retval);
+		return retval;
+	}
+
+	/* transfer 3 data packets, should be DATA0, DATA1, DATA0 */
+	retval = simple_io(tdev, urb, 1, 0, 0, __func__);
+	if (retval != 0)
+		return -EINVAL;
+
+	/* clear halt resets device side data toggle, host should react to it */
+	retval = usb_clear_halt(urb->dev, urb->pipe);
+	if (retval < 0) {
+		ERROR(tdev, "ep %02x couldn't clear halt, %d\n", ep, retval);
+		return retval;
+	}
+
+	/* host should use DATA0 again after clear halt */
+	retval = simple_io(tdev, urb, 1, 0, 0, __func__);
+
+	return retval;
+}
+
+static int halt_simple(struct usbtest_dev *dev)
+{
+	int			ep;
+	int			retval = 0;
+	struct urb		*urb;
+	struct usb_device	*udev = testdev_to_usbdev(dev);
+
+	if (udev->speed == USB_SPEED_SUPER)
+		urb = simple_alloc_urb(udev, 0, 1024, 0);
+	else
+		urb = simple_alloc_urb(udev, 0, 512, 0);
+	if (urb == NULL)
+		return -ENOMEM;
+
+	if (dev->in_pipe) {
+		ep = usb_pipeendpoint(dev->in_pipe) | USB_DIR_IN;
+		urb->pipe = dev->in_pipe;
+		retval = test_halt(dev, ep, urb);
+		if (retval < 0)
+			goto done;
+	}
+
+	if (dev->out_pipe) {
+		ep = usb_pipeendpoint(dev->out_pipe);
+		urb->pipe = dev->out_pipe;
+		retval = test_halt(dev, ep, urb);
+	}
+done:
+	simple_free_urb(urb);
+	return retval;
+}
+
+static int toggle_sync_simple(struct usbtest_dev *dev)
+{
+	int			ep;
+	int			retval = 0;
+	struct urb		*urb;
+	struct usb_device	*udev = testdev_to_usbdev(dev);
+	unsigned		maxp = get_maxpacket(udev, dev->out_pipe);
+
+	/*
+	 * Create a URB that causes a transfer of uneven amount of data packets
+	 * This way the clear toggle has an impact on the data toggle sequence.
+	 * Use 2 maxpacket length packets and one zero packet.
+	 */
+	urb = simple_alloc_urb(udev, 0,  2 * maxp, 0);
+	if (urb == NULL)
+		return -ENOMEM;
+
+	urb->transfer_flags |= URB_ZERO_PACKET;
+
+	ep = usb_pipeendpoint(dev->out_pipe);
+	urb->pipe = dev->out_pipe;
+	retval = test_toggle_sync(dev, ep, urb);
+
+	simple_free_urb(urb);
+	return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Control OUT tests use the vendor control requests from Intel's
+ * USB 2.0 compliance test device:  write a buffer, read it back.
+ *
+ * Intel's spec only _requires_ that it work for one packet, which
+ * is pretty weak.   Some HCDs place limits here; most devices will
+ * need to be able to handle more than one OUT data packet.  We'll
+ * try whatever we're told to try.
+ */
+static int ctrl_out(struct usbtest_dev *dev,
+		unsigned count, unsigned length, unsigned vary, unsigned offset)
+{
+	unsigned		i, j, len;
+	int			retval;
+	u8			*buf;
+	char			*what = "?";
+	struct usb_device	*udev;
+
+	if (length < 1 || length > 0xffff || vary >= length)
+		return -EINVAL;
+
+	buf = kmalloc(length + offset, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	buf += offset;
+	udev = testdev_to_usbdev(dev);
+	len = length;
+	retval = 0;
+
+	/* NOTE:  hardware might well act differently if we pushed it
+	 * with lots back-to-back queued requests.
+	 */
+	for (i = 0; i < count; i++) {
+		/* write patterned data */
+		for (j = 0; j < len; j++)
+			buf[j] = (u8)(i + j);
+		retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				0x5b, USB_DIR_OUT|USB_TYPE_VENDOR,
+				0, 0, buf, len, USB_CTRL_SET_TIMEOUT);
+		if (retval != len) {
+			what = "write";
+			if (retval >= 0) {
+				ERROR(dev, "ctrl_out, wlen %d (expected %d)\n",
+						retval, len);
+				retval = -EBADMSG;
+			}
+			break;
+		}
+
+		/* read it back -- assuming nothing intervened!!  */
+		retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+				0x5c, USB_DIR_IN|USB_TYPE_VENDOR,
+				0, 0, buf, len, USB_CTRL_GET_TIMEOUT);
+		if (retval != len) {
+			what = "read";
+			if (retval >= 0) {
+				ERROR(dev, "ctrl_out, rlen %d (expected %d)\n",
+						retval, len);
+				retval = -EBADMSG;
+			}
+			break;
+		}
+
+		/* fail if we can't verify */
+		for (j = 0; j < len; j++) {
+			if (buf[j] != (u8)(i + j)) {
+				ERROR(dev, "ctrl_out, byte %d is %d not %d\n",
+					j, buf[j], (u8)(i + j));
+				retval = -EBADMSG;
+				break;
+			}
+		}
+		if (retval < 0) {
+			what = "verify";
+			break;
+		}
+
+		len += vary;
+
+		/* [real world] the "zero bytes IN" case isn't really used.
+		 * hardware can easily trip up in this weird case, since its
+		 * status stage is IN, not OUT like other ep0in transfers.
+		 */
+		if (len > length)
+			len = realworld ? 1 : 0;
+	}
+
+	if (retval < 0)
+		ERROR(dev, "ctrl_out %s failed, code %d, count %d\n",
+			what, retval, i);
+
+	kfree(buf - offset);
+	return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* ISO/BULK tests ... mimics common usage
+ *  - buffer length is split into N packets (mostly maxpacket sized)
+ *  - multi-buffers according to sglen
+ */
+
+struct transfer_context {
+	unsigned		count;
+	unsigned		pending;
+	spinlock_t		lock;
+	struct completion	done;
+	int			submit_error;
+	unsigned long		errors;
+	unsigned long		packet_count;
+	struct usbtest_dev	*dev;
+	bool			is_iso;
+};
+
+static void complicated_callback(struct urb *urb)
+{
+	struct transfer_context	*ctx = urb->context;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctx->lock, flags);
+	ctx->count--;
+
+	ctx->packet_count += urb->number_of_packets;
+	if (urb->error_count > 0)
+		ctx->errors += urb->error_count;
+	else if (urb->status != 0)
+		ctx->errors += (ctx->is_iso ? urb->number_of_packets : 1);
+	else if (urb->actual_length != urb->transfer_buffer_length)
+		ctx->errors++;
+	else if (check_guard_bytes(ctx->dev, urb) != 0)
+		ctx->errors++;
+
+	if (urb->status == 0 && ctx->count > (ctx->pending - 1)
+			&& !ctx->submit_error) {
+		int status = usb_submit_urb(urb, GFP_ATOMIC);
+		switch (status) {
+		case 0:
+			goto done;
+		default:
+			dev_err(&ctx->dev->intf->dev,
+					"resubmit err %d\n",
+					status);
+			fallthrough;
+		case -ENODEV:			/* disconnected */
+		case -ESHUTDOWN:		/* endpoint disabled */
+			ctx->submit_error = 1;
+			break;
+		}
+	}
+
+	ctx->pending--;
+	if (ctx->pending == 0) {
+		if (ctx->errors)
+			dev_err(&ctx->dev->intf->dev,
+				"during the test, %lu errors out of %lu\n",
+				ctx->errors, ctx->packet_count);
+		complete(&ctx->done);
+	}
+done:
+	spin_unlock_irqrestore(&ctx->lock, flags);
+}
+
+static struct urb *iso_alloc_urb(
+	struct usb_device	*udev,
+	int			pipe,
+	struct usb_endpoint_descriptor	*desc,
+	long			bytes,
+	unsigned offset
+)
+{
+	struct urb		*urb;
+	unsigned		i, maxp, packets;
+
+	if (bytes < 0 || !desc)
+		return NULL;
+
+	maxp = usb_endpoint_maxp(desc);
+	if (udev->speed >= USB_SPEED_SUPER)
+		maxp *= ss_isoc_get_packet_num(udev, pipe);
+	else
+		maxp *= usb_endpoint_maxp_mult(desc);
+
+	packets = DIV_ROUND_UP(bytes, maxp);
+
+	urb = usb_alloc_urb(packets, GFP_KERNEL);
+	if (!urb)
+		return urb;
+	urb->dev = udev;
+	urb->pipe = pipe;
+
+	urb->number_of_packets = packets;
+	urb->transfer_buffer_length = bytes;
+	urb->transfer_buffer = usb_alloc_coherent(udev, bytes + offset,
+							GFP_KERNEL,
+							&urb->transfer_dma);
+	if (!urb->transfer_buffer) {
+		usb_free_urb(urb);
+		return NULL;
+	}
+	if (offset) {
+		memset(urb->transfer_buffer, GUARD_BYTE, offset);
+		urb->transfer_buffer += offset;
+		urb->transfer_dma += offset;
+	}
+	/* For inbound transfers use guard byte so that test fails if
+		data not correctly copied */
+	memset(urb->transfer_buffer,
+			usb_pipein(urb->pipe) ? GUARD_BYTE : 0,
+			bytes);
+
+	for (i = 0; i < packets; i++) {
+		/* here, only the last packet will be short */
+		urb->iso_frame_desc[i].length = min((unsigned) bytes, maxp);
+		bytes -= urb->iso_frame_desc[i].length;
+
+		urb->iso_frame_desc[i].offset = maxp * i;
+	}
+
+	urb->complete = complicated_callback;
+	/* urb->context = SET BY CALLER */
+	urb->interval = 1 << (desc->bInterval - 1);
+	urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+	return urb;
+}
+
+static int
+test_queue(struct usbtest_dev *dev, struct usbtest_param_32 *param,
+		int pipe, struct usb_endpoint_descriptor *desc, unsigned offset)
+{
+	struct transfer_context	context;
+	struct usb_device	*udev;
+	unsigned		i;
+	unsigned long		packets = 0;
+	int			status = 0;
+	struct urb		**urbs;
+
+	if (!param->sglen || param->iterations > UINT_MAX / param->sglen)
+		return -EINVAL;
+
+	if (param->sglen > MAX_SGLEN)
+		return -EINVAL;
+
+	urbs = kcalloc(param->sglen, sizeof(*urbs), GFP_KERNEL);
+	if (!urbs)
+		return -ENOMEM;
+
+	memset(&context, 0, sizeof(context));
+	context.count = param->iterations * param->sglen;
+	context.dev = dev;
+	context.is_iso = !!desc;
+	init_completion(&context.done);
+	spin_lock_init(&context.lock);
+
+	udev = testdev_to_usbdev(dev);
+
+	for (i = 0; i < param->sglen; i++) {
+		if (context.is_iso)
+			urbs[i] = iso_alloc_urb(udev, pipe, desc,
+					param->length, offset);
+		else
+			urbs[i] = complicated_alloc_urb(udev, pipe,
+					param->length, 0);
+
+		if (!urbs[i]) {
+			status = -ENOMEM;
+			goto fail;
+		}
+		packets += urbs[i]->number_of_packets;
+		urbs[i]->context = &context;
+	}
+	packets *= param->iterations;
+
+	if (context.is_iso) {
+		int transaction_num;
+
+		if (udev->speed >= USB_SPEED_SUPER)
+			transaction_num = ss_isoc_get_packet_num(udev, pipe);
+		else
+			transaction_num = usb_endpoint_maxp_mult(desc);
+
+		dev_info(&dev->intf->dev,
+			"iso period %d %sframes, wMaxPacket %d, transactions: %d\n",
+			1 << (desc->bInterval - 1),
+			(udev->speed >= USB_SPEED_HIGH) ? "micro" : "",
+			usb_endpoint_maxp(desc),
+			transaction_num);
+
+		dev_info(&dev->intf->dev,
+			"total %lu msec (%lu packets)\n",
+			(packets * (1 << (desc->bInterval - 1)))
+				/ ((udev->speed >= USB_SPEED_HIGH) ? 8 : 1),
+			packets);
+	}
+
+	spin_lock_irq(&context.lock);
+	for (i = 0; i < param->sglen; i++) {
+		++context.pending;
+		status = usb_submit_urb(urbs[i], GFP_ATOMIC);
+		if (status < 0) {
+			ERROR(dev, "submit iso[%d], error %d\n", i, status);
+			if (i == 0) {
+				spin_unlock_irq(&context.lock);
+				goto fail;
+			}
+
+			simple_free_urb(urbs[i]);
+			urbs[i] = NULL;
+			context.pending--;
+			context.submit_error = 1;
+			break;
+		}
+	}
+	spin_unlock_irq(&context.lock);
+
+	wait_for_completion(&context.done);
+
+	for (i = 0; i < param->sglen; i++) {
+		if (urbs[i])
+			simple_free_urb(urbs[i]);
+	}
+	/*
+	 * Isochronous transfers are expected to fail sometimes.  As an
+	 * arbitrary limit, we will report an error if any submissions
+	 * fail or if the transfer failure rate is > 10%.
+	 */
+	if (status != 0)
+		;
+	else if (context.submit_error)
+		status = -EACCES;
+	else if (context.errors >
+			(context.is_iso ? context.packet_count / 10 : 0))
+		status = -EIO;
+
+	kfree(urbs);
+	return status;
+
+fail:
+	for (i = 0; i < param->sglen; i++) {
+		if (urbs[i])
+			simple_free_urb(urbs[i]);
+	}
+
+	kfree(urbs);
+	return status;
+}
+
+static int test_unaligned_bulk(
+	struct usbtest_dev *tdev,
+	int pipe,
+	unsigned length,
+	int iterations,
+	unsigned transfer_flags,
+	const char *label)
+{
+	int retval;
+	struct urb *urb = usbtest_alloc_urb(testdev_to_usbdev(tdev),
+			pipe, length, transfer_flags, 1, 0, simple_callback);
+
+	if (!urb)
+		return -ENOMEM;
+
+	retval = simple_io(tdev, urb, iterations, 0, 0, label);
+	simple_free_urb(urb);
+	return retval;
+}
+
+/* Run tests. */
+static int
+usbtest_do_ioctl(struct usb_interface *intf, struct usbtest_param_32 *param)
+{
+	struct usbtest_dev	*dev = usb_get_intfdata(intf);
+	struct usb_device	*udev = testdev_to_usbdev(dev);
+	struct urb		*urb;
+	struct scatterlist	*sg;
+	struct usb_sg_request	req;
+	unsigned		i;
+	int	retval = -EOPNOTSUPP;
+
+	if (param->iterations <= 0)
+		return -EINVAL;
+	if (param->sglen > MAX_SGLEN)
+		return -EINVAL;
+	/*
+	 * Just a bunch of test cases that every HCD is expected to handle.
+	 *
+	 * Some may need specific firmware, though it'd be good to have
+	 * one firmware image to handle all the test cases.
+	 *
+	 * FIXME add more tests!  cancel requests, verify the data, control
+	 * queueing, concurrent read+write threads, and so on.
+	 */
+	switch (param->test_num) {
+
+	case 0:
+		dev_info(&intf->dev, "TEST 0:  NOP\n");
+		retval = 0;
+		break;
+
+	/* Simple non-queued bulk I/O tests */
+	case 1:
+		if (dev->out_pipe == 0)
+			break;
+		dev_info(&intf->dev,
+				"TEST 1:  write %d bytes %u times\n",
+				param->length, param->iterations);
+		urb = simple_alloc_urb(udev, dev->out_pipe, param->length, 0);
+		if (!urb) {
+			retval = -ENOMEM;
+			break;
+		}
+		/* FIRMWARE:  bulk sink (maybe accepts short writes) */
+		retval = simple_io(dev, urb, param->iterations, 0, 0, "test1");
+		simple_free_urb(urb);
+		break;
+	case 2:
+		if (dev->in_pipe == 0)
+			break;
+		dev_info(&intf->dev,
+				"TEST 2:  read %d bytes %u times\n",
+				param->length, param->iterations);
+		urb = simple_alloc_urb(udev, dev->in_pipe, param->length, 0);
+		if (!urb) {
+			retval = -ENOMEM;
+			break;
+		}
+		/* FIRMWARE:  bulk source (maybe generates short writes) */
+		retval = simple_io(dev, urb, param->iterations, 0, 0, "test2");
+		simple_free_urb(urb);
+		break;
+	case 3:
+		if (dev->out_pipe == 0 || param->vary == 0)
+			break;
+		dev_info(&intf->dev,
+				"TEST 3:  write/%d 0..%d bytes %u times\n",
+				param->vary, param->length, param->iterations);
+		urb = simple_alloc_urb(udev, dev->out_pipe, param->length, 0);
+		if (!urb) {
+			retval = -ENOMEM;
+			break;
+		}
+		/* FIRMWARE:  bulk sink (maybe accepts short writes) */
+		retval = simple_io(dev, urb, param->iterations, param->vary,
+					0, "test3");
+		simple_free_urb(urb);
+		break;
+	case 4:
+		if (dev->in_pipe == 0 || param->vary == 0)
+			break;
+		dev_info(&intf->dev,
+				"TEST 4:  read/%d 0..%d bytes %u times\n",
+				param->vary, param->length, param->iterations);
+		urb = simple_alloc_urb(udev, dev->in_pipe, param->length, 0);
+		if (!urb) {
+			retval = -ENOMEM;
+			break;
+		}
+		/* FIRMWARE:  bulk source (maybe generates short writes) */
+		retval = simple_io(dev, urb, param->iterations, param->vary,
+					0, "test4");
+		simple_free_urb(urb);
+		break;
+
+	/* Queued bulk I/O tests */
+	case 5:
+		if (dev->out_pipe == 0 || param->sglen == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 5:  write %d sglists %d entries of %d bytes\n",
+				param->iterations,
+				param->sglen, param->length);
+		sg = alloc_sglist(param->sglen, param->length,
+				0, dev, dev->out_pipe);
+		if (!sg) {
+			retval = -ENOMEM;
+			break;
+		}
+		/* FIRMWARE:  bulk sink (maybe accepts short writes) */
+		retval = perform_sglist(dev, param->iterations, dev->out_pipe,
+				&req, sg, param->sglen);
+		free_sglist(sg, param->sglen);
+		break;
+
+	case 6:
+		if (dev->in_pipe == 0 || param->sglen == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 6:  read %d sglists %d entries of %d bytes\n",
+				param->iterations,
+				param->sglen, param->length);
+		sg = alloc_sglist(param->sglen, param->length,
+				0, dev, dev->in_pipe);
+		if (!sg) {
+			retval = -ENOMEM;
+			break;
+		}
+		/* FIRMWARE:  bulk source (maybe generates short writes) */
+		retval = perform_sglist(dev, param->iterations, dev->in_pipe,
+				&req, sg, param->sglen);
+		free_sglist(sg, param->sglen);
+		break;
+	case 7:
+		if (dev->out_pipe == 0 || param->sglen == 0 || param->vary == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 7:  write/%d %d sglists %d entries 0..%d bytes\n",
+				param->vary, param->iterations,
+				param->sglen, param->length);
+		sg = alloc_sglist(param->sglen, param->length,
+				param->vary, dev, dev->out_pipe);
+		if (!sg) {
+			retval = -ENOMEM;
+			break;
+		}
+		/* FIRMWARE:  bulk sink (maybe accepts short writes) */
+		retval = perform_sglist(dev, param->iterations, dev->out_pipe,
+				&req, sg, param->sglen);
+		free_sglist(sg, param->sglen);
+		break;
+	case 8:
+		if (dev->in_pipe == 0 || param->sglen == 0 || param->vary == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 8:  read/%d %d sglists %d entries 0..%d bytes\n",
+				param->vary, param->iterations,
+				param->sglen, param->length);
+		sg = alloc_sglist(param->sglen, param->length,
+				param->vary, dev, dev->in_pipe);
+		if (!sg) {
+			retval = -ENOMEM;
+			break;
+		}
+		/* FIRMWARE:  bulk source (maybe generates short writes) */
+		retval = perform_sglist(dev, param->iterations, dev->in_pipe,
+				&req, sg, param->sglen);
+		free_sglist(sg, param->sglen);
+		break;
+
+	/* non-queued sanity tests for control (chapter 9 subset) */
+	case 9:
+		retval = 0;
+		dev_info(&intf->dev,
+			"TEST 9:  ch9 (subset) control tests, %d times\n",
+				param->iterations);
+		for (i = param->iterations; retval == 0 && i--; /* NOP */)
+			retval = ch9_postconfig(dev);
+		if (retval)
+			dev_err(&intf->dev, "ch9 subset failed, "
+					"iterations left %d\n", i);
+		break;
+
+	/* queued control messaging */
+	case 10:
+		retval = 0;
+		dev_info(&intf->dev,
+				"TEST 10:  queue %d control calls, %d times\n",
+				param->sglen,
+				param->iterations);
+		retval = test_ctrl_queue(dev, param);
+		break;
+
+	/* simple non-queued unlinks (ring with one urb) */
+	case 11:
+		if (dev->in_pipe == 0 || !param->length)
+			break;
+		retval = 0;
+		dev_info(&intf->dev, "TEST 11:  unlink %d reads of %d\n",
+				param->iterations, param->length);
+		for (i = param->iterations; retval == 0 && i--; /* NOP */)
+			retval = unlink_simple(dev, dev->in_pipe,
+						param->length);
+		if (retval)
+			dev_err(&intf->dev, "unlink reads failed %d, "
+				"iterations left %d\n", retval, i);
+		break;
+	case 12:
+		if (dev->out_pipe == 0 || !param->length)
+			break;
+		retval = 0;
+		dev_info(&intf->dev, "TEST 12:  unlink %d writes of %d\n",
+				param->iterations, param->length);
+		for (i = param->iterations; retval == 0 && i--; /* NOP */)
+			retval = unlink_simple(dev, dev->out_pipe,
+						param->length);
+		if (retval)
+			dev_err(&intf->dev, "unlink writes failed %d, "
+				"iterations left %d\n", retval, i);
+		break;
+
+	/* ep halt tests */
+	case 13:
+		if (dev->out_pipe == 0 && dev->in_pipe == 0)
+			break;
+		retval = 0;
+		dev_info(&intf->dev, "TEST 13:  set/clear %d halts\n",
+				param->iterations);
+		for (i = param->iterations; retval == 0 && i--; /* NOP */)
+			retval = halt_simple(dev);
+
+		if (retval)
+			ERROR(dev, "halts failed, iterations left %d\n", i);
+		break;
+
+	/* control write tests */
+	case 14:
+		if (!dev->info->ctrl_out)
+			break;
+		dev_info(&intf->dev, "TEST 14:  %d ep0out, %d..%d vary %d\n",
+				param->iterations,
+				realworld ? 1 : 0, param->length,
+				param->vary);
+		retval = ctrl_out(dev, param->iterations,
+				param->length, param->vary, 0);
+		break;
+
+	/* iso write tests */
+	case 15:
+		if (dev->out_iso_pipe == 0 || param->sglen == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 15:  write %d iso, %d entries of %d bytes\n",
+				param->iterations,
+				param->sglen, param->length);
+		/* FIRMWARE:  iso sink */
+		retval = test_queue(dev, param,
+				dev->out_iso_pipe, dev->iso_out, 0);
+		break;
+
+	/* iso read tests */
+	case 16:
+		if (dev->in_iso_pipe == 0 || param->sglen == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 16:  read %d iso, %d entries of %d bytes\n",
+				param->iterations,
+				param->sglen, param->length);
+		/* FIRMWARE:  iso source */
+		retval = test_queue(dev, param,
+				dev->in_iso_pipe, dev->iso_in, 0);
+		break;
+
+	/* FIXME scatterlist cancel (needs helper thread) */
+
+	/* Tests for bulk I/O using DMA mapping by core and odd address */
+	case 17:
+		if (dev->out_pipe == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 17:  write odd addr %d bytes %u times core map\n",
+			param->length, param->iterations);
+
+		retval = test_unaligned_bulk(
+				dev, dev->out_pipe,
+				param->length, param->iterations,
+				0, "test17");
+		break;
+
+	case 18:
+		if (dev->in_pipe == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 18:  read odd addr %d bytes %u times core map\n",
+			param->length, param->iterations);
+
+		retval = test_unaligned_bulk(
+				dev, dev->in_pipe,
+				param->length, param->iterations,
+				0, "test18");
+		break;
+
+	/* Tests for bulk I/O using premapped coherent buffer and odd address */
+	case 19:
+		if (dev->out_pipe == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 19:  write odd addr %d bytes %u times premapped\n",
+			param->length, param->iterations);
+
+		retval = test_unaligned_bulk(
+				dev, dev->out_pipe,
+				param->length, param->iterations,
+				URB_NO_TRANSFER_DMA_MAP, "test19");
+		break;
+
+	case 20:
+		if (dev->in_pipe == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 20:  read odd addr %d bytes %u times premapped\n",
+			param->length, param->iterations);
+
+		retval = test_unaligned_bulk(
+				dev, dev->in_pipe,
+				param->length, param->iterations,
+				URB_NO_TRANSFER_DMA_MAP, "test20");
+		break;
+
+	/* control write tests with unaligned buffer */
+	case 21:
+		if (!dev->info->ctrl_out)
+			break;
+		dev_info(&intf->dev,
+				"TEST 21:  %d ep0out odd addr, %d..%d vary %d\n",
+				param->iterations,
+				realworld ? 1 : 0, param->length,
+				param->vary);
+		retval = ctrl_out(dev, param->iterations,
+				param->length, param->vary, 1);
+		break;
+
+	/* unaligned iso tests */
+	case 22:
+		if (dev->out_iso_pipe == 0 || param->sglen == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 22:  write %d iso odd, %d entries of %d bytes\n",
+				param->iterations,
+				param->sglen, param->length);
+		retval = test_queue(dev, param,
+				dev->out_iso_pipe, dev->iso_out, 1);
+		break;
+
+	case 23:
+		if (dev->in_iso_pipe == 0 || param->sglen == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 23:  read %d iso odd, %d entries of %d bytes\n",
+				param->iterations,
+				param->sglen, param->length);
+		retval = test_queue(dev, param,
+				dev->in_iso_pipe, dev->iso_in, 1);
+		break;
+
+	/* unlink URBs from a bulk-OUT queue */
+	case 24:
+		if (dev->out_pipe == 0 || !param->length || param->sglen < 4)
+			break;
+		retval = 0;
+		dev_info(&intf->dev, "TEST 24:  unlink from %d queues of "
+				"%d %d-byte writes\n",
+				param->iterations, param->sglen, param->length);
+		for (i = param->iterations; retval == 0 && i > 0; --i) {
+			retval = unlink_queued(dev, dev->out_pipe,
+						param->sglen, param->length);
+			if (retval) {
+				dev_err(&intf->dev,
+					"unlink queued writes failed %d, "
+					"iterations left %d\n", retval, i);
+				break;
+			}
+		}
+		break;
+
+	/* Simple non-queued interrupt I/O tests */
+	case 25:
+		if (dev->out_int_pipe == 0)
+			break;
+		dev_info(&intf->dev,
+				"TEST 25: write %d bytes %u times\n",
+				param->length, param->iterations);
+		urb = simple_alloc_urb(udev, dev->out_int_pipe, param->length,
+				dev->int_out->bInterval);
+		if (!urb) {
+			retval = -ENOMEM;
+			break;
+		}
+		/* FIRMWARE: interrupt sink (maybe accepts short writes) */
+		retval = simple_io(dev, urb, param->iterations, 0, 0, "test25");
+		simple_free_urb(urb);
+		break;
+	case 26:
+		if (dev->in_int_pipe == 0)
+			break;
+		dev_info(&intf->dev,
+				"TEST 26: read %d bytes %u times\n",
+				param->length, param->iterations);
+		urb = simple_alloc_urb(udev, dev->in_int_pipe, param->length,
+				dev->int_in->bInterval);
+		if (!urb) {
+			retval = -ENOMEM;
+			break;
+		}
+		/* FIRMWARE: interrupt source (maybe generates short writes) */
+		retval = simple_io(dev, urb, param->iterations, 0, 0, "test26");
+		simple_free_urb(urb);
+		break;
+	case 27:
+		/* We do performance test, so ignore data compare */
+		if (dev->out_pipe == 0 || param->sglen == 0 || pattern != 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 27: bulk write %dMbytes\n", (param->iterations *
+			param->sglen * param->length) / (1024 * 1024));
+		retval = test_queue(dev, param,
+				dev->out_pipe, NULL, 0);
+		break;
+	case 28:
+		if (dev->in_pipe == 0 || param->sglen == 0 || pattern != 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 28: bulk read %dMbytes\n", (param->iterations *
+			param->sglen * param->length) / (1024 * 1024));
+		retval = test_queue(dev, param,
+				dev->in_pipe, NULL, 0);
+		break;
+	/* Test data Toggle/seq_nr clear between bulk out transfers */
+	case 29:
+		if (dev->out_pipe == 0)
+			break;
+		retval = 0;
+		dev_info(&intf->dev, "TEST 29: Clear toggle between bulk writes %d times\n",
+				param->iterations);
+		for (i = param->iterations; retval == 0 && i > 0; --i)
+			retval = toggle_sync_simple(dev);
+
+		if (retval)
+			ERROR(dev, "toggle sync failed, iterations left %d\n",
+			      i);
+		break;
+	}
+	return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* We only have this one interface to user space, through usbfs.
+ * User mode code can scan usbfs to find N different devices (maybe on
+ * different busses) to use when testing, and allocate one thread per
+ * test.  So discovery is simplified, and we have no device naming issues.
+ *
+ * Don't use these only as stress/load tests.  Use them along with
+ * other USB bus activity:  plugging, unplugging, mousing, mp3 playback,
+ * video capture, and so on.  Run different tests at different times, in
+ * different sequences.  Nothing here should interact with other devices,
+ * except indirectly by consuming USB bandwidth and CPU resources for test
+ * threads and request completion.  But the only way to know that for sure
+ * is to test when HC queues are in use by many devices.
+ *
+ * WARNING:  Because usbfs grabs udev->dev.sem before calling this ioctl(),
+ * it locks out usbcore in certain code paths.  Notably, if you disconnect
+ * the device-under-test, hub_wq will wait block forever waiting for the
+ * ioctl to complete ... so that usb_disconnect() can abort the pending
+ * urbs and then call usbtest_disconnect().  To abort a test, you're best
+ * off just killing the userspace task and waiting for it to exit.
+ */
+
+static int
+usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
+{
+
+	struct usbtest_dev	*dev = usb_get_intfdata(intf);
+	struct usbtest_param_64 *param_64 = buf;
+	struct usbtest_param_32 temp;
+	struct usbtest_param_32 *param_32 = buf;
+	struct timespec64 start;
+	struct timespec64 end;
+	struct timespec64 duration;
+	int retval = -EOPNOTSUPP;
+
+	/* FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is. */
+
+	pattern = mod_pattern;
+
+	if (mutex_lock_interruptible(&dev->lock))
+		return -ERESTARTSYS;
+
+	/* FIXME: What if a system sleep starts while a test is running? */
+
+	/* some devices, like ez-usb default devices, need a non-default
+	 * altsetting to have any active endpoints.  some tests change
+	 * altsettings; force a default so most tests don't need to check.
+	 */
+	if (dev->info->alt >= 0) {
+		if (intf->altsetting->desc.bInterfaceNumber) {
+			retval = -ENODEV;
+			goto free_mutex;
+		}
+		retval = set_altsetting(dev, dev->info->alt);
+		if (retval) {
+			dev_err(&intf->dev,
+					"set altsetting to %d failed, %d\n",
+					dev->info->alt, retval);
+			goto free_mutex;
+		}
+	}
+
+	switch (code) {
+	case USBTEST_REQUEST_64:
+		temp.test_num = param_64->test_num;
+		temp.iterations = param_64->iterations;
+		temp.length = param_64->length;
+		temp.sglen = param_64->sglen;
+		temp.vary = param_64->vary;
+		param_32 = &temp;
+		break;
+
+	case USBTEST_REQUEST_32:
+		break;
+
+	default:
+		retval = -EOPNOTSUPP;
+		goto free_mutex;
+	}
+
+	ktime_get_ts64(&start);
+
+	retval = usbtest_do_ioctl(intf, param_32);
+	if (retval < 0)
+		goto free_mutex;
+
+	ktime_get_ts64(&end);
+
+	duration = timespec64_sub(end, start);
+
+	temp.duration_sec = duration.tv_sec;
+	temp.duration_usec = duration.tv_nsec/NSEC_PER_USEC;
+
+	switch (code) {
+	case USBTEST_REQUEST_32:
+		param_32->duration_sec = temp.duration_sec;
+		param_32->duration_usec = temp.duration_usec;
+		break;
+
+	case USBTEST_REQUEST_64:
+		param_64->duration_sec = temp.duration_sec;
+		param_64->duration_usec = temp.duration_usec;
+		break;
+	}
+
+free_mutex:
+	mutex_unlock(&dev->lock);
+	return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static unsigned force_interrupt;
+module_param(force_interrupt, uint, 0);
+MODULE_PARM_DESC(force_interrupt, "0 = test default; else interrupt");
+
+#ifdef	GENERIC
+static unsigned short vendor;
+module_param(vendor, ushort, 0);
+MODULE_PARM_DESC(vendor, "vendor code (from usb-if)");
+
+static unsigned short product;
+module_param(product, ushort, 0);
+MODULE_PARM_DESC(product, "product code (from vendor)");
+#endif
+
+static int
+usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device	*udev;
+	struct usbtest_dev	*dev;
+	struct usbtest_info	*info;
+	char			*rtest, *wtest;
+	char			*irtest, *iwtest;
+	char			*intrtest, *intwtest;
+
+	udev = interface_to_usbdev(intf);
+
+#ifdef	GENERIC
+	/* specify devices by module parameters? */
+	if (id->match_flags == 0) {
+		/* vendor match required, product match optional */
+		if (!vendor || le16_to_cpu(udev->descriptor.idVendor) != (u16)vendor)
+			return -ENODEV;
+		if (product && le16_to_cpu(udev->descriptor.idProduct) != (u16)product)
+			return -ENODEV;
+		dev_info(&intf->dev, "matched module params, "
+					"vend=0x%04x prod=0x%04x\n",
+				le16_to_cpu(udev->descriptor.idVendor),
+				le16_to_cpu(udev->descriptor.idProduct));
+	}
+#endif
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+	info = (struct usbtest_info *) id->driver_info;
+	dev->info = info;
+	mutex_init(&dev->lock);
+
+	dev->intf = intf;
+
+	/* cacheline-aligned scratch for i/o */
+	dev->buf = kmalloc(TBUF_SIZE, GFP_KERNEL);
+	if (dev->buf == NULL) {
+		kfree(dev);
+		return -ENOMEM;
+	}
+
+	/* NOTE this doesn't yet test the handful of difference that are
+	 * visible with high speed interrupts:  bigger maxpacket (1K) and
+	 * "high bandwidth" modes (up to 3 packets/uframe).
+	 */
+	rtest = wtest = "";
+	irtest = iwtest = "";
+	intrtest = intwtest = "";
+	if (force_interrupt || udev->speed == USB_SPEED_LOW) {
+		if (info->ep_in) {
+			dev->in_pipe = usb_rcvintpipe(udev, info->ep_in);
+			rtest = " intr-in";
+		}
+		if (info->ep_out) {
+			dev->out_pipe = usb_sndintpipe(udev, info->ep_out);
+			wtest = " intr-out";
+		}
+	} else {
+		if (override_alt >= 0 || info->autoconf) {
+			int status;
+
+			status = get_endpoints(dev, intf);
+			if (status < 0) {
+				WARNING(dev, "couldn't get endpoints, %d\n",
+						status);
+				kfree(dev->buf);
+				kfree(dev);
+				return status;
+			}
+			/* may find bulk or ISO pipes */
+		} else {
+			if (info->ep_in)
+				dev->in_pipe = usb_rcvbulkpipe(udev,
+							info->ep_in);
+			if (info->ep_out)
+				dev->out_pipe = usb_sndbulkpipe(udev,
+							info->ep_out);
+		}
+		if (dev->in_pipe)
+			rtest = " bulk-in";
+		if (dev->out_pipe)
+			wtest = " bulk-out";
+		if (dev->in_iso_pipe)
+			irtest = " iso-in";
+		if (dev->out_iso_pipe)
+			iwtest = " iso-out";
+		if (dev->in_int_pipe)
+			intrtest = " int-in";
+		if (dev->out_int_pipe)
+			intwtest = " int-out";
+	}
+
+	usb_set_intfdata(intf, dev);
+	dev_info(&intf->dev, "%s\n", info->name);
+	dev_info(&intf->dev, "%s {control%s%s%s%s%s%s%s} tests%s\n",
+			usb_speed_string(udev->speed),
+			info->ctrl_out ? " in/out" : "",
+			rtest, wtest,
+			irtest, iwtest,
+			intrtest, intwtest,
+			info->alt >= 0 ? " (+alt)" : "");
+	return 0;
+}
+
+static int usbtest_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	return 0;
+}
+
+static int usbtest_resume(struct usb_interface *intf)
+{
+	return 0;
+}
+
+
+static void usbtest_disconnect(struct usb_interface *intf)
+{
+	struct usbtest_dev	*dev = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+	dev_dbg(&intf->dev, "disconnect\n");
+	kfree(dev->buf);
+	kfree(dev);
+}
+
+/* Basic testing only needs a device that can source or sink bulk traffic.
+ * Any device can test control transfers (default with GENERIC binding).
+ *
+ * Several entries work with the default EP0 implementation that's built
+ * into EZ-USB chips.  There's a default vendor ID which can be overridden
+ * by (very) small config EEPROMS, but otherwise all these devices act
+ * identically until firmware is loaded:  only EP0 works.  It turns out
+ * to be easy to make other endpoints work, without modifying that EP0
+ * behavior.  For now, we expect that kind of firmware.
+ */
+
+/* an21xx or fx versions of ez-usb */
+static struct usbtest_info ez1_info = {
+	.name		= "EZ-USB device",
+	.ep_in		= 2,
+	.ep_out		= 2,
+	.alt		= 1,
+};
+
+/* fx2 version of ez-usb */
+static struct usbtest_info ez2_info = {
+	.name		= "FX2 device",
+	.ep_in		= 6,
+	.ep_out		= 2,
+	.alt		= 1,
+};
+
+/* ezusb family device with dedicated usb test firmware,
+ */
+static struct usbtest_info fw_info = {
+	.name		= "usb test device",
+	.ep_in		= 2,
+	.ep_out		= 2,
+	.alt		= 1,
+	.autoconf	= 1,		/* iso and ctrl_out need autoconf */
+	.ctrl_out	= 1,
+	.iso		= 1,		/* iso_ep's are #8 in/out */
+};
+
+/* peripheral running Linux and 'zero.c' test firmware, or
+ * its user-mode cousin. different versions of this use
+ * different hardware with the same vendor/product codes.
+ * host side MUST rely on the endpoint descriptors.
+ */
+static struct usbtest_info gz_info = {
+	.name		= "Linux gadget zero",
+	.autoconf	= 1,
+	.ctrl_out	= 1,
+	.iso		= 1,
+	.intr		= 1,
+	.alt		= 0,
+};
+
+static struct usbtest_info um_info = {
+	.name		= "Linux user mode test driver",
+	.autoconf	= 1,
+	.alt		= -1,
+};
+
+static struct usbtest_info um2_info = {
+	.name		= "Linux user mode ISO test driver",
+	.autoconf	= 1,
+	.iso		= 1,
+	.alt		= -1,
+};
+
+#ifdef IBOT2
+/* this is a nice source of high speed bulk data;
+ * uses an FX2, with firmware provided in the device
+ */
+static struct usbtest_info ibot2_info = {
+	.name		= "iBOT2 webcam",
+	.ep_in		= 2,
+	.alt		= -1,
+};
+#endif
+
+#ifdef GENERIC
+/* we can use any device to test control traffic */
+static struct usbtest_info generic_info = {
+	.name		= "Generic USB device",
+	.alt		= -1,
+};
+#endif
+
+
+static const struct usb_device_id id_table[] = {
+
+	/*-------------------------------------------------------------*/
+
+	/* EZ-USB devices which download firmware to replace (or in our
+	 * case augment) the default device implementation.
+	 */
+
+	/* generic EZ-USB FX controller */
+	{ USB_DEVICE(0x0547, 0x2235),
+		.driver_info = (unsigned long) &ez1_info,
+	},
+
+	/* CY3671 development board with EZ-USB FX */
+	{ USB_DEVICE(0x0547, 0x0080),
+		.driver_info = (unsigned long) &ez1_info,
+	},
+
+	/* generic EZ-USB FX2 controller (or development board) */
+	{ USB_DEVICE(0x04b4, 0x8613),
+		.driver_info = (unsigned long) &ez2_info,
+	},
+
+	/* re-enumerated usb test device firmware */
+	{ USB_DEVICE(0xfff0, 0xfff0),
+		.driver_info = (unsigned long) &fw_info,
+	},
+
+	/* "Gadget Zero" firmware runs under Linux */
+	{ USB_DEVICE(0x0525, 0xa4a0),
+		.driver_info = (unsigned long) &gz_info,
+	},
+
+	/* so does a user-mode variant */
+	{ USB_DEVICE(0x0525, 0xa4a4),
+		.driver_info = (unsigned long) &um_info,
+	},
+
+	/* ... and a user-mode variant that talks iso */
+	{ USB_DEVICE(0x0525, 0xa4a3),
+		.driver_info = (unsigned long) &um2_info,
+	},
+
+#ifdef KEYSPAN_19Qi
+	/* Keyspan 19qi uses an21xx (original EZ-USB) */
+	/* this does not coexist with the real Keyspan 19qi driver! */
+	{ USB_DEVICE(0x06cd, 0x010b),
+		.driver_info = (unsigned long) &ez1_info,
+	},
+#endif
+
+	/*-------------------------------------------------------------*/
+
+#ifdef IBOT2
+	/* iBOT2 makes a nice source of high speed bulk-in data */
+	/* this does not coexist with a real iBOT2 driver! */
+	{ USB_DEVICE(0x0b62, 0x0059),
+		.driver_info = (unsigned long) &ibot2_info,
+	},
+#endif
+
+	/*-------------------------------------------------------------*/
+
+#ifdef GENERIC
+	/* module params can specify devices to use for control tests */
+	{ .driver_info = (unsigned long) &generic_info, },
+#endif
+
+	/*-------------------------------------------------------------*/
+
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver usbtest_driver = {
+	.name =		"usbtest",
+	.id_table =	id_table,
+	.probe =	usbtest_probe,
+	.unlocked_ioctl = usbtest_ioctl,
+	.disconnect =	usbtest_disconnect,
+	.suspend =	usbtest_suspend,
+	.resume =	usbtest_resume,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init usbtest_init(void)
+{
+#ifdef GENERIC
+	if (vendor)
+		pr_debug("params: vend=0x%04x prod=0x%04x\n", vendor, product);
+#endif
+	return usb_register(&usbtest_driver);
+}
+module_init(usbtest_init);
+
+static void __exit usbtest_exit(void)
+{
+	usb_deregister(&usbtest_driver);
+}
+module_exit(usbtest_exit);
+
+MODULE_DESCRIPTION("USB Core/HCD Testing Driver");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
new file mode 100644
index 000000000..b00d92db5
--- /dev/null
+++ b/drivers/usb/misc/uss720.c
@@ -0,0 +1,824 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*****************************************************************************/
+
+/*
+ *	uss720.c  --  USS720 USB Parport Cable.
+ *
+ *	Copyright (C) 1999, 2005, 2010
+ *	    Thomas Sailer (t.sailer@alumni.ethz.ch)
+ *
+ *  Based on parport_pc.c
+ *
+ *  History:
+ *   0.1  04.08.1999  Created
+ *   0.2  07.08.1999  Some fixes mainly suggested by Tim Waugh
+ *		      Interrupt handling currently disabled because
+ *		      usb_request_irq crashes somewhere within ohci.c
+ *		      for no apparent reason (that is for me, anyway)
+ *		      ECP currently untested
+ *   0.3  10.08.1999  fixing merge errors
+ *   0.4  13.08.1999  Added Vendor/Product ID of Brad Hard's cable
+ *   0.5  20.09.1999  usb_control_msg wrapper used
+ *        Nov01.2000  usb_device_table support by Adam J. Richter
+ *        08.04.2001  Identify version on module load.  gb
+ *   0.6  02.09.2005  Fix "scheduling in interrupt" problem by making save/restore
+ *                    context asynchronous
+ *
+ */
+
+/*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/socket.h>
+#include <linux/parport.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/delay.h>
+#include <linux/completion.h>
+#include <linux/kref.h>
+#include <linux/slab.h>
+#include <linux/sched/signal.h>
+
+#define DRIVER_AUTHOR "Thomas M. Sailer, t.sailer@alumni.ethz.ch"
+#define DRIVER_DESC "USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip"
+
+/* --------------------------------------------------------------------- */
+
+struct parport_uss720_private {
+	struct usb_device *usbdev;
+	struct parport *pp;
+	struct kref ref_count;
+	__u8 reg[7];  /* USB registers */
+	struct list_head asynclist;
+	spinlock_t asynclock;
+};
+
+struct uss720_async_request {
+	struct parport_uss720_private *priv;
+	struct kref ref_count;
+	struct list_head asynclist;
+	struct completion compl;
+	struct urb *urb;
+	struct usb_ctrlrequest *dr;
+	__u8 reg[7];
+};
+
+/* --------------------------------------------------------------------- */
+
+static void destroy_priv(struct kref *kref)
+{
+	struct parport_uss720_private *priv = container_of(kref, struct parport_uss720_private, ref_count);
+
+	dev_dbg(&priv->usbdev->dev, "destroying priv datastructure\n");
+	usb_put_dev(priv->usbdev);
+	priv->usbdev = NULL;
+	kfree(priv);
+}
+
+static void destroy_async(struct kref *kref)
+{
+	struct uss720_async_request *rq = container_of(kref, struct uss720_async_request, ref_count);
+	struct parport_uss720_private *priv = rq->priv;
+	unsigned long flags;
+
+	if (likely(rq->urb))
+		usb_free_urb(rq->urb);
+	kfree(rq->dr);
+	spin_lock_irqsave(&priv->asynclock, flags);
+	list_del_init(&rq->asynclist);
+	spin_unlock_irqrestore(&priv->asynclock, flags);
+	kfree(rq);
+	kref_put(&priv->ref_count, destroy_priv);
+}
+
+/* --------------------------------------------------------------------- */
+
+static void async_complete(struct urb *urb)
+{
+	struct uss720_async_request *rq;
+	struct parport *pp;
+	struct parport_uss720_private *priv;
+	int status = urb->status;
+
+	rq = urb->context;
+	priv = rq->priv;
+	pp = priv->pp;
+	if (status) {
+		dev_err(&urb->dev->dev, "async_complete: urb error %d\n",
+			status);
+	} else if (rq->dr->bRequest == 3) {
+		memcpy(priv->reg, rq->reg, sizeof(priv->reg));
+#if 0
+		dev_dbg(&priv->usbdev->dev, "async_complete regs %7ph\n",
+			priv->reg);
+#endif
+		/* if nAck interrupts are enabled and we have an interrupt, call the interrupt procedure */
+		if (rq->reg[2] & rq->reg[1] & 0x10 && pp)
+			parport_generic_irq(pp);
+	}
+	complete(&rq->compl);
+	kref_put(&rq->ref_count, destroy_async);
+}
+
+static struct uss720_async_request *submit_async_request(struct parport_uss720_private *priv,
+							 __u8 request, __u8 requesttype, __u16 value, __u16 index,
+							 gfp_t mem_flags)
+{
+	struct usb_device *usbdev;
+	struct uss720_async_request *rq;
+	unsigned long flags;
+	int ret;
+
+	if (!priv)
+		return NULL;
+	usbdev = priv->usbdev;
+	if (!usbdev)
+		return NULL;
+	rq = kzalloc(sizeof(struct uss720_async_request), mem_flags);
+	if (!rq)
+		return NULL;
+	kref_init(&rq->ref_count);
+	INIT_LIST_HEAD(&rq->asynclist);
+	init_completion(&rq->compl);
+	kref_get(&priv->ref_count);
+	rq->priv = priv;
+	rq->urb = usb_alloc_urb(0, mem_flags);
+	if (!rq->urb) {
+		kref_put(&rq->ref_count, destroy_async);
+		return NULL;
+	}
+	rq->dr = kmalloc(sizeof(*rq->dr), mem_flags);
+	if (!rq->dr) {
+		kref_put(&rq->ref_count, destroy_async);
+		return NULL;
+	}
+	rq->dr->bRequestType = requesttype;
+	rq->dr->bRequest = request;
+	rq->dr->wValue = cpu_to_le16(value);
+	rq->dr->wIndex = cpu_to_le16(index);
+	rq->dr->wLength = cpu_to_le16((request == 3) ? sizeof(rq->reg) : 0);
+	usb_fill_control_urb(rq->urb, usbdev, (requesttype & 0x80) ? usb_rcvctrlpipe(usbdev, 0) : usb_sndctrlpipe(usbdev, 0),
+			     (unsigned char *)rq->dr,
+			     (request == 3) ? rq->reg : NULL, (request == 3) ? sizeof(rq->reg) : 0, async_complete, rq);
+	/* rq->urb->transfer_flags |= URB_ASYNC_UNLINK; */
+	spin_lock_irqsave(&priv->asynclock, flags);
+	list_add_tail(&rq->asynclist, &priv->asynclist);
+	spin_unlock_irqrestore(&priv->asynclock, flags);
+	kref_get(&rq->ref_count);
+	ret = usb_submit_urb(rq->urb, mem_flags);
+	if (!ret)
+		return rq;
+	destroy_async(&rq->ref_count);
+	dev_err(&usbdev->dev, "submit_async_request submit_urb failed with %d\n", ret);
+	return NULL;
+}
+
+static unsigned int kill_all_async_requests_priv(struct parport_uss720_private *priv)
+{
+	struct uss720_async_request *rq;
+	unsigned long flags;
+	unsigned int ret = 0;
+
+	spin_lock_irqsave(&priv->asynclock, flags);
+	list_for_each_entry(rq, &priv->asynclist, asynclist) {
+		usb_unlink_urb(rq->urb);
+		ret++;
+	}
+	spin_unlock_irqrestore(&priv->asynclock, flags);
+	return ret;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int get_1284_register(struct parport *pp, unsigned char reg, unsigned char *val, gfp_t mem_flags)
+{
+	struct parport_uss720_private *priv;
+	struct uss720_async_request *rq;
+	static const unsigned char regindex[9] = {
+		4, 0, 1, 5, 5, 0, 2, 3, 6
+	};
+	int ret;
+
+	if (!pp)
+		return -EIO;
+	priv = pp->private_data;
+	rq = submit_async_request(priv, 3, 0xc0, ((unsigned int)reg) << 8, 0, mem_flags);
+	if (!rq) {
+		dev_err(&priv->usbdev->dev, "get_1284_register(%u) failed",
+			(unsigned int)reg);
+		return -EIO;
+	}
+	if (!val) {
+		kref_put(&rq->ref_count, destroy_async);
+		return 0;
+	}
+	if (wait_for_completion_timeout(&rq->compl, HZ)) {
+		ret = rq->urb->status;
+		*val = priv->reg[(reg >= 9) ? 0 : regindex[reg]];
+		if (ret)
+			printk(KERN_WARNING "get_1284_register: "
+			       "usb error %d\n", ret);
+		kref_put(&rq->ref_count, destroy_async);
+		return ret;
+	}
+	printk(KERN_WARNING "get_1284_register timeout\n");
+	kill_all_async_requests_priv(priv);
+	return -EIO;
+}
+
+static int set_1284_register(struct parport *pp, unsigned char reg, unsigned char val, gfp_t mem_flags)
+{
+	struct parport_uss720_private *priv;
+	struct uss720_async_request *rq;
+
+	if (!pp)
+		return -EIO;
+	priv = pp->private_data;
+	rq = submit_async_request(priv, 4, 0x40, (((unsigned int)reg) << 8) | val, 0, mem_flags);
+	if (!rq) {
+		dev_err(&priv->usbdev->dev, "set_1284_register(%u,%u) failed",
+			(unsigned int)reg, (unsigned int)val);
+		return -EIO;
+	}
+	kref_put(&rq->ref_count, destroy_async);
+	return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+/* ECR modes */
+#define ECR_SPP 00
+#define ECR_PS2 01
+#define ECR_PPF 02
+#define ECR_ECP 03
+#define ECR_EPP 04
+
+/* Safely change the mode bits in the ECR */
+static int change_mode(struct parport *pp, int m)
+{
+	struct parport_uss720_private *priv = pp->private_data;
+	int mode;
+	__u8 reg;
+
+	if (get_1284_register(pp, 6, &reg, GFP_KERNEL))
+		return -EIO;
+	/* Bits <7:5> contain the mode. */
+	mode = (priv->reg[2] >> 5) & 0x7;
+	if (mode == m)
+		return 0;
+	/* We have to go through mode 000 or 001 */
+	if (mode > ECR_PS2 && m > ECR_PS2)
+		if (change_mode(pp, ECR_PS2))
+			return -EIO;
+
+	if (m <= ECR_PS2 && !(priv->reg[1] & 0x20)) {
+		/* This mode resets the FIFO, so we may
+		 * have to wait for it to drain first. */
+		unsigned long expire = jiffies + pp->physport->cad->timeout;
+		switch (mode) {
+		case ECR_PPF: /* Parallel Port FIFO mode */
+		case ECR_ECP: /* ECP Parallel Port mode */
+			/* Poll slowly. */
+			for (;;) {
+				if (get_1284_register(pp, 6, &reg, GFP_KERNEL))
+					return -EIO;
+				if (priv->reg[2] & 0x01)
+					break;
+				if (time_after_eq (jiffies, expire))
+					/* The FIFO is stuck. */
+					return -EBUSY;
+				msleep_interruptible(10);
+				if (signal_pending (current))
+					break;
+			}
+		}
+	}
+	/* Set the mode. */
+	if (set_1284_register(pp, 6, m << 5, GFP_KERNEL))
+		return -EIO;
+	if (get_1284_register(pp, 6, &reg, GFP_KERNEL))
+		return -EIO;
+	return 0;
+}
+
+/*
+ * Clear TIMEOUT BIT in EPP MODE
+ */
+static int clear_epp_timeout(struct parport *pp)
+{
+	unsigned char stat;
+
+	if (get_1284_register(pp, 1, &stat, GFP_KERNEL))
+		return 1;
+	return stat & 1;
+}
+
+/*
+ * Access functions.
+ */
+#if 0
+static int uss720_irq(int usbstatus, void *buffer, int len, void *dev_id)
+{
+	struct parport *pp = (struct parport *)dev_id;
+	struct parport_uss720_private *priv = pp->private_data;	
+
+	if (usbstatus != 0 || len < 4 || !buffer)
+		return 1;
+	memcpy(priv->reg, buffer, 4);
+	/* if nAck interrupts are enabled and we have an interrupt, call the interrupt procedure */
+	if (priv->reg[2] & priv->reg[1] & 0x10)
+		parport_generic_irq(pp);
+	return 1;
+}
+#endif
+
+static void parport_uss720_write_data(struct parport *pp, unsigned char d)
+{
+	set_1284_register(pp, 0, d, GFP_KERNEL);
+}
+
+static unsigned char parport_uss720_read_data(struct parport *pp)
+{
+	unsigned char ret;
+
+	if (get_1284_register(pp, 0, &ret, GFP_KERNEL))
+		return 0;
+	return ret;
+}
+
+static void parport_uss720_write_control(struct parport *pp, unsigned char d)
+{
+	struct parport_uss720_private *priv = pp->private_data;	
+
+	d = (d & 0xf) | (priv->reg[1] & 0xf0);
+	if (set_1284_register(pp, 2, d, GFP_KERNEL))
+		return;
+	priv->reg[1] = d;
+}
+
+static unsigned char parport_uss720_read_control(struct parport *pp)
+{
+	struct parport_uss720_private *priv = pp->private_data;	
+	return priv->reg[1] & 0xf; /* Use soft copy */
+}
+
+static unsigned char parport_uss720_frob_control(struct parport *pp, unsigned char mask, unsigned char val)
+{
+	struct parport_uss720_private *priv = pp->private_data;	
+	unsigned char d;
+
+	mask &= 0x0f;
+	val &= 0x0f;
+	d = (priv->reg[1] & (~mask)) ^ val;
+	if (set_1284_register(pp, 2, d, GFP_ATOMIC))
+		return 0;
+	priv->reg[1] = d;
+	return d & 0xf;
+}
+
+static unsigned char parport_uss720_read_status(struct parport *pp)
+{
+	unsigned char ret;
+
+	if (get_1284_register(pp, 1, &ret, GFP_ATOMIC))
+		return 0;
+	return ret & 0xf8;
+}
+
+static void parport_uss720_disable_irq(struct parport *pp)
+{
+	struct parport_uss720_private *priv = pp->private_data;	
+	unsigned char d;
+
+	d = priv->reg[1] & ~0x10;
+	if (set_1284_register(pp, 2, d, GFP_KERNEL))
+		return;
+	priv->reg[1] = d;
+}
+
+static void parport_uss720_enable_irq(struct parport *pp)
+{
+	struct parport_uss720_private *priv = pp->private_data;	
+	unsigned char d;
+
+	d = priv->reg[1] | 0x10;
+	if (set_1284_register(pp, 2, d, GFP_KERNEL))
+		return;
+	priv->reg[1] = d;
+}
+
+static void parport_uss720_data_forward (struct parport *pp)
+{
+	struct parport_uss720_private *priv = pp->private_data;	
+	unsigned char d;
+
+	d = priv->reg[1] & ~0x20;
+	if (set_1284_register(pp, 2, d, GFP_KERNEL))
+		return;
+	priv->reg[1] = d;
+}
+
+static void parport_uss720_data_reverse (struct parport *pp)
+{
+	struct parport_uss720_private *priv = pp->private_data;	
+	unsigned char d;
+
+	d = priv->reg[1] | 0x20;
+	if (set_1284_register(pp, 2, d, GFP_KERNEL))
+		return;
+	priv->reg[1] = d;
+}
+
+static void parport_uss720_init_state(struct pardevice *dev, struct parport_state *s)
+{
+	s->u.pc.ctr = 0xc | (dev->irq_func ? 0x10 : 0x0);
+	s->u.pc.ecr = 0x24;
+}
+
+static void parport_uss720_save_state(struct parport *pp, struct parport_state *s)
+{
+	struct parport_uss720_private *priv = pp->private_data;	
+
+#if 0
+	if (get_1284_register(pp, 2, NULL, GFP_ATOMIC))
+		return;
+#endif
+	s->u.pc.ctr = priv->reg[1];
+	s->u.pc.ecr = priv->reg[2];
+}
+
+static void parport_uss720_restore_state(struct parport *pp, struct parport_state *s)
+{
+	struct parport_uss720_private *priv = pp->private_data;
+
+	set_1284_register(pp, 2, s->u.pc.ctr, GFP_ATOMIC);
+	set_1284_register(pp, 6, s->u.pc.ecr, GFP_ATOMIC);
+	get_1284_register(pp, 2, NULL, GFP_ATOMIC);
+	priv->reg[1] = s->u.pc.ctr;
+	priv->reg[2] = s->u.pc.ecr;
+}
+
+static size_t parport_uss720_epp_read_data(struct parport *pp, void *buf, size_t length, int flags)
+{
+	struct parport_uss720_private *priv = pp->private_data;	
+	size_t got = 0;
+
+	if (change_mode(pp, ECR_EPP))
+		return 0;
+	for (; got < length; got++) {
+		if (get_1284_register(pp, 4, (char *)buf, GFP_KERNEL))
+			break;
+		buf++;
+		if (priv->reg[0] & 0x01) {
+			clear_epp_timeout(pp);
+			break;
+		}
+	}
+	change_mode(pp, ECR_PS2);
+	return got;
+}
+
+static size_t parport_uss720_epp_write_data(struct parport *pp, const void *buf, size_t length, int flags)
+{
+#if 0
+	struct parport_uss720_private *priv = pp->private_data;	
+	size_t written = 0;
+
+	if (change_mode(pp, ECR_EPP))
+		return 0;
+	for (; written < length; written++) {
+		if (set_1284_register(pp, 4, (char *)buf, GFP_KERNEL))
+			break;
+		((char*)buf)++;
+		if (get_1284_register(pp, 1, NULL, GFP_KERNEL))
+			break;
+		if (priv->reg[0] & 0x01) {
+			clear_epp_timeout(pp);
+			break;
+		}
+	}
+	change_mode(pp, ECR_PS2);
+	return written;
+#else
+	struct parport_uss720_private *priv = pp->private_data;
+	struct usb_device *usbdev = priv->usbdev;
+	int rlen = 0;
+	int i;
+
+	if (!usbdev)
+		return 0;
+	if (change_mode(pp, ECR_EPP))
+		return 0;
+	i = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, 1), (void *)buf, length, &rlen, 20000);
+	if (i)
+		printk(KERN_ERR "uss720: sendbulk ep 1 buf %p len %zu rlen %u\n", buf, length, rlen);
+	change_mode(pp, ECR_PS2);
+	return rlen;
+#endif
+}
+
+static size_t parport_uss720_epp_read_addr(struct parport *pp, void *buf, size_t length, int flags)
+{
+	struct parport_uss720_private *priv = pp->private_data;	
+	size_t got = 0;
+
+	if (change_mode(pp, ECR_EPP))
+		return 0;
+	for (; got < length; got++) {
+		if (get_1284_register(pp, 3, (char *)buf, GFP_KERNEL))
+			break;
+		buf++;
+		if (priv->reg[0] & 0x01) {
+			clear_epp_timeout(pp);
+			break;
+		}
+	}
+	change_mode(pp, ECR_PS2);
+	return got;
+}
+
+static size_t parport_uss720_epp_write_addr(struct parport *pp, const void *buf, size_t length, int flags)
+{
+	struct parport_uss720_private *priv = pp->private_data;	
+	size_t written = 0;
+
+	if (change_mode(pp, ECR_EPP))
+		return 0;
+	for (; written < length; written++) {
+		if (set_1284_register(pp, 3, *(char *)buf, GFP_KERNEL))
+			break;
+		buf++;
+		if (get_1284_register(pp, 1, NULL, GFP_KERNEL))
+			break;
+		if (priv->reg[0] & 0x01) {
+			clear_epp_timeout(pp);
+			break;
+		}
+	}
+	change_mode(pp, ECR_PS2);
+	return written;
+}
+
+static size_t parport_uss720_ecp_write_data(struct parport *pp, const void *buffer, size_t len, int flags)
+{
+	struct parport_uss720_private *priv = pp->private_data;
+	struct usb_device *usbdev = priv->usbdev;
+	int rlen = 0;
+	int i;
+
+	if (!usbdev)
+		return 0;
+	if (change_mode(pp, ECR_ECP))
+		return 0;
+	i = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, 1), (void *)buffer, len, &rlen, 20000);
+	if (i)
+		printk(KERN_ERR "uss720: sendbulk ep 1 buf %p len %zu rlen %u\n", buffer, len, rlen);
+	change_mode(pp, ECR_PS2);
+	return rlen;
+}
+
+static size_t parport_uss720_ecp_read_data(struct parport *pp, void *buffer, size_t len, int flags)
+{
+	struct parport_uss720_private *priv = pp->private_data;
+	struct usb_device *usbdev = priv->usbdev;
+	int rlen = 0;
+	int i;
+
+	if (!usbdev)
+		return 0;
+	if (change_mode(pp, ECR_ECP))
+		return 0;
+	i = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, 2), buffer, len, &rlen, 20000);
+	if (i)
+		printk(KERN_ERR "uss720: recvbulk ep 2 buf %p len %zu rlen %u\n", buffer, len, rlen);
+	change_mode(pp, ECR_PS2);
+	return rlen;
+}
+
+static size_t parport_uss720_ecp_write_addr(struct parport *pp, const void *buffer, size_t len, int flags)
+{
+	size_t written = 0;
+
+	if (change_mode(pp, ECR_ECP))
+		return 0;
+	for (; written < len; written++) {
+		if (set_1284_register(pp, 5, *(char *)buffer, GFP_KERNEL))
+			break;
+		buffer++;
+	}
+	change_mode(pp, ECR_PS2);
+	return written;
+}
+
+static size_t parport_uss720_write_compat(struct parport *pp, const void *buffer, size_t len, int flags)
+{
+	struct parport_uss720_private *priv = pp->private_data;
+	struct usb_device *usbdev = priv->usbdev;
+	int rlen = 0;
+	int i;
+
+	if (!usbdev)
+		return 0;
+	if (change_mode(pp, ECR_PPF))
+		return 0;
+	i = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, 1), (void *)buffer, len, &rlen, 20000);
+	if (i)
+		printk(KERN_ERR "uss720: sendbulk ep 1 buf %p len %zu rlen %u\n", buffer, len, rlen);
+	change_mode(pp, ECR_PS2);
+	return rlen;
+}
+
+/* --------------------------------------------------------------------- */
+
+static struct parport_operations parport_uss720_ops = 
+{
+	.owner =		THIS_MODULE,
+	.write_data =		parport_uss720_write_data,
+	.read_data =		parport_uss720_read_data,
+
+	.write_control =	parport_uss720_write_control,
+	.read_control =		parport_uss720_read_control,
+	.frob_control =		parport_uss720_frob_control,
+
+	.read_status =		parport_uss720_read_status,
+
+	.enable_irq =		parport_uss720_enable_irq,
+	.disable_irq =		parport_uss720_disable_irq,
+
+	.data_forward =		parport_uss720_data_forward,
+	.data_reverse =		parport_uss720_data_reverse,
+
+	.init_state =		parport_uss720_init_state,
+	.save_state =		parport_uss720_save_state,
+	.restore_state =	parport_uss720_restore_state,
+
+	.epp_write_data =	parport_uss720_epp_write_data,
+	.epp_read_data =	parport_uss720_epp_read_data,
+	.epp_write_addr =	parport_uss720_epp_write_addr,
+	.epp_read_addr =	parport_uss720_epp_read_addr,
+
+	.ecp_write_data =	parport_uss720_ecp_write_data,
+	.ecp_read_data =	parport_uss720_ecp_read_data,
+	.ecp_write_addr =	parport_uss720_ecp_write_addr,
+
+	.compat_write_data =	parport_uss720_write_compat,
+	.nibble_read_data =	parport_ieee1284_read_nibble,
+	.byte_read_data =	parport_ieee1284_read_byte,
+};
+
+/* --------------------------------------------------------------------- */
+
+static int uss720_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	struct usb_device *usbdev = usb_get_dev(interface_to_usbdev(intf));
+	struct usb_host_interface *interface;
+	struct usb_endpoint_descriptor *epd;
+	struct parport_uss720_private *priv;
+	struct parport *pp;
+	unsigned char reg;
+	int i;
+
+	dev_dbg(&intf->dev, "probe: vendor id 0x%x, device id 0x%x\n",
+		le16_to_cpu(usbdev->descriptor.idVendor),
+		le16_to_cpu(usbdev->descriptor.idProduct));
+
+	/* our known interfaces have 3 alternate settings */
+	if (intf->num_altsetting != 3) {
+		usb_put_dev(usbdev);
+		return -ENODEV;
+	}
+	i = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2);
+	dev_dbg(&intf->dev, "set interface result %d\n", i);
+
+	interface = intf->cur_altsetting;
+
+	if (interface->desc.bNumEndpoints < 3) {
+		usb_put_dev(usbdev);
+		return -ENODEV;
+	}
+
+	/*
+	 * Allocate parport interface 
+	 */
+	priv = kzalloc(sizeof(struct parport_uss720_private), GFP_KERNEL);
+	if (!priv) {
+		usb_put_dev(usbdev);
+		return -ENOMEM;
+	}
+	priv->pp = NULL;
+	priv->usbdev = usbdev;
+	kref_init(&priv->ref_count);
+	spin_lock_init(&priv->asynclock);
+	INIT_LIST_HEAD(&priv->asynclist);
+	pp = parport_register_port(0, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &parport_uss720_ops);
+	if (!pp) {
+		printk(KERN_WARNING "uss720: could not register parport\n");
+		goto probe_abort;
+	}
+
+	priv->pp = pp;
+	pp->private_data = priv;
+	pp->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_TRISTATE | PARPORT_MODE_EPP | PARPORT_MODE_ECP | PARPORT_MODE_COMPAT;
+
+	/* set the USS720 control register to manual mode, no ECP compression, enable all ints */
+	set_1284_register(pp, 7, 0x00, GFP_KERNEL);
+	set_1284_register(pp, 6, 0x30, GFP_KERNEL);  /* PS/2 mode */
+	set_1284_register(pp, 2, 0x0c, GFP_KERNEL);
+	/* debugging */
+	get_1284_register(pp, 0, &reg, GFP_KERNEL);
+	dev_dbg(&intf->dev, "reg: %7ph\n", priv->reg);
+
+	i = usb_find_last_int_in_endpoint(interface, &epd);
+	if (!i) {
+		dev_dbg(&intf->dev, "epaddr %d interval %d\n",
+				epd->bEndpointAddress, epd->bInterval);
+	}
+	parport_announce_port(pp);
+
+	usb_set_intfdata(intf, pp);
+	return 0;
+
+probe_abort:
+	kill_all_async_requests_priv(priv);
+	kref_put(&priv->ref_count, destroy_priv);
+	return -ENODEV;
+}
+
+static void uss720_disconnect(struct usb_interface *intf)
+{
+	struct parport *pp = usb_get_intfdata(intf);
+	struct parport_uss720_private *priv;
+
+	dev_dbg(&intf->dev, "disconnect\n");
+	usb_set_intfdata(intf, NULL);
+	if (pp) {
+		priv = pp->private_data;
+		priv->pp = NULL;
+		dev_dbg(&intf->dev, "parport_remove_port\n");
+		parport_remove_port(pp);
+		parport_put_port(pp);
+		kill_all_async_requests_priv(priv);
+		kref_put(&priv->ref_count, destroy_priv);
+	}
+	dev_dbg(&intf->dev, "disconnect done\n");
+}
+
+/* table of cables that work through this driver */
+static const struct usb_device_id uss720_table[] = {
+	{ USB_DEVICE(0x047e, 0x1001) },
+	{ USB_DEVICE(0x04b8, 0x0002) },
+	{ USB_DEVICE(0x04b8, 0x0003) },
+	{ USB_DEVICE(0x050d, 0x0002) },
+	{ USB_DEVICE(0x050d, 0x1202) },
+	{ USB_DEVICE(0x0557, 0x2001) },
+	{ USB_DEVICE(0x05ab, 0x0002) },
+	{ USB_DEVICE(0x06c6, 0x0100) },
+	{ USB_DEVICE(0x0729, 0x1284) },
+	{ USB_DEVICE(0x1293, 0x0002) },
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, uss720_table);
+
+
+static struct usb_driver uss720_driver = {
+	.name =		"uss720",
+	.probe =	uss720_probe,
+	.disconnect =	uss720_disconnect,
+	.id_table =	uss720_table,
+};
+
+/* --------------------------------------------------------------------- */
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static int __init uss720_init(void)
+{
+	int retval;
+	retval = usb_register(&uss720_driver);
+	if (retval)
+		goto out;
+
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
+	printk(KERN_INFO KBUILD_MODNAME ": NOTE: this is a special purpose "
+	       "driver to allow nonstandard\n");
+	printk(KERN_INFO KBUILD_MODNAME ": protocols (eg. bitbang) over "
+	       "USS720 usb to parallel cables\n");
+	printk(KERN_INFO KBUILD_MODNAME ": If you just want to connect to a "
+	       "printer, use usblp instead\n");
+out:
+	return retval;
+}
+
+static void __exit uss720_cleanup(void)
+{
+	usb_deregister(&uss720_driver);
+}
+
+module_init(uss720_init);
+module_exit(uss720_cleanup);
+
+/* --------------------------------------------------------------------- */
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
new file mode 100644
index 000000000..c640f98d2
--- /dev/null
+++ b/drivers/usb/misc/yurex.c
@@ -0,0 +1,530 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Meywa-Denki & KAYAC YUREX
+ *
+ * Copyright (C) 2010 Tomoki Sekiyama (tomoki.sekiyama@gmail.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kref.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/hid.h>
+
+#define DRIVER_AUTHOR "Tomoki Sekiyama"
+#define DRIVER_DESC "Driver for Meywa-Denki & KAYAC YUREX"
+
+#define YUREX_VENDOR_ID		0x0c45
+#define YUREX_PRODUCT_ID	0x1010
+
+#define CMD_ACK		'!'
+#define CMD_ANIMATE	'A'
+#define CMD_COUNT	'C'
+#define CMD_LED		'L'
+#define CMD_READ	'R'
+#define CMD_SET		'S'
+#define CMD_VERSION	'V'
+#define CMD_EOF		0x0d
+#define CMD_PADDING	0xff
+
+#define YUREX_BUF_SIZE		8
+#define YUREX_WRITE_TIMEOUT	(HZ*2)
+
+/* table of devices that work with this driver */
+static struct usb_device_id yurex_table[] = {
+	{ USB_DEVICE(YUREX_VENDOR_ID, YUREX_PRODUCT_ID) },
+	{ }					/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, yurex_table);
+
+#ifdef CONFIG_USB_DYNAMIC_MINORS
+#define YUREX_MINOR_BASE	0
+#else
+#define YUREX_MINOR_BASE	192
+#endif
+
+/* Structure to hold all of our device specific stuff */
+struct usb_yurex {
+	struct usb_device	*udev;
+	struct usb_interface	*interface;
+	__u8			int_in_endpointAddr;
+	struct urb		*urb;		/* URB for interrupt in */
+	unsigned char           *int_buffer;	/* buffer for intterupt in */
+	struct urb		*cntl_urb;	/* URB for control msg */
+	struct usb_ctrlrequest	*cntl_req;	/* req for control msg */
+	unsigned char		*cntl_buffer;	/* buffer for control msg */
+
+	struct kref		kref;
+	struct mutex		io_mutex;
+	unsigned long		disconnected:1;
+	struct fasync_struct	*async_queue;
+	wait_queue_head_t	waitq;
+
+	spinlock_t		lock;
+	__s64			bbu;		/* BBU from device */
+};
+#define to_yurex_dev(d) container_of(d, struct usb_yurex, kref)
+
+static struct usb_driver yurex_driver;
+static const struct file_operations yurex_fops;
+
+
+static void yurex_control_callback(struct urb *urb)
+{
+	struct usb_yurex *dev = urb->context;
+	int status = urb->status;
+
+	if (status) {
+		dev_err(&urb->dev->dev, "%s - control failed: %d\n",
+			__func__, status);
+		wake_up_interruptible(&dev->waitq);
+		return;
+	}
+	/* on success, sender woken up by CMD_ACK int in, or timeout */
+}
+
+static void yurex_delete(struct kref *kref)
+{
+	struct usb_yurex *dev = to_yurex_dev(kref);
+
+	dev_dbg(&dev->interface->dev, "%s\n", __func__);
+
+	if (dev->cntl_urb) {
+		usb_kill_urb(dev->cntl_urb);
+		kfree(dev->cntl_req);
+		usb_free_coherent(dev->udev, YUREX_BUF_SIZE,
+				dev->cntl_buffer, dev->cntl_urb->transfer_dma);
+		usb_free_urb(dev->cntl_urb);
+	}
+	if (dev->urb) {
+		usb_kill_urb(dev->urb);
+		usb_free_coherent(dev->udev, YUREX_BUF_SIZE,
+				dev->int_buffer, dev->urb->transfer_dma);
+		usb_free_urb(dev->urb);
+	}
+	usb_put_intf(dev->interface);
+	usb_put_dev(dev->udev);
+	kfree(dev);
+}
+
+/*
+ * usb class driver info in order to get a minor number from the usb core,
+ * and to have the device registered with the driver core
+ */
+static struct usb_class_driver yurex_class = {
+	.name =		"yurex%d",
+	.fops =		&yurex_fops,
+	.minor_base =	YUREX_MINOR_BASE,
+};
+
+static void yurex_interrupt(struct urb *urb)
+{
+	struct usb_yurex *dev = urb->context;
+	unsigned char *buf = dev->int_buffer;
+	int status = urb->status;
+	unsigned long flags;
+	int retval, i;
+
+	switch (status) {
+	case 0: /*success*/
+		break;
+	/* The device is terminated or messed up, give up */
+	case -EOVERFLOW:
+		dev_err(&dev->interface->dev,
+			"%s - overflow with length %d, actual length is %d\n",
+			__func__, YUREX_BUF_SIZE, dev->urb->actual_length);
+		return;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+	case -EILSEQ:
+	case -EPROTO:
+	case -ETIME:
+		return;
+	default:
+		dev_err(&dev->interface->dev,
+			"%s - unknown status received: %d\n", __func__, status);
+		return;
+	}
+
+	/* handle received message */
+	switch (buf[0]) {
+	case CMD_COUNT:
+	case CMD_READ:
+		if (buf[6] == CMD_EOF) {
+			spin_lock_irqsave(&dev->lock, flags);
+			dev->bbu = 0;
+			for (i = 1; i < 6; i++) {
+				dev->bbu += buf[i];
+				if (i != 5)
+					dev->bbu <<= 8;
+			}
+			dev_dbg(&dev->interface->dev, "%s count: %lld\n",
+				__func__, dev->bbu);
+			spin_unlock_irqrestore(&dev->lock, flags);
+
+			kill_fasync(&dev->async_queue, SIGIO, POLL_IN);
+		}
+		else
+			dev_dbg(&dev->interface->dev,
+				"data format error - no EOF\n");
+		break;
+	case CMD_ACK:
+		dev_dbg(&dev->interface->dev, "%s ack: %c\n",
+			__func__, buf[1]);
+		wake_up_interruptible(&dev->waitq);
+		break;
+	}
+
+	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
+	if (retval) {
+		dev_err(&dev->interface->dev, "%s - usb_submit_urb failed: %d\n",
+			__func__, retval);
+	}
+}
+
+static int yurex_probe(struct usb_interface *interface, const struct usb_device_id *id)
+{
+	struct usb_yurex *dev;
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	int retval = -ENOMEM;
+	DEFINE_WAIT(wait);
+	int res;
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		goto error;
+	kref_init(&dev->kref);
+	mutex_init(&dev->io_mutex);
+	spin_lock_init(&dev->lock);
+	init_waitqueue_head(&dev->waitq);
+
+	dev->udev = usb_get_dev(interface_to_usbdev(interface));
+	dev->interface = usb_get_intf(interface);
+
+	/* set up the endpoint information */
+	iface_desc = interface->cur_altsetting;
+	res = usb_find_int_in_endpoint(iface_desc, &endpoint);
+	if (res) {
+		dev_err(&interface->dev, "Could not find endpoints\n");
+		retval = res;
+		goto error;
+	}
+
+	dev->int_in_endpointAddr = endpoint->bEndpointAddress;
+
+	/* allocate control URB */
+	dev->cntl_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->cntl_urb)
+		goto error;
+
+	/* allocate buffer for control req */
+	dev->cntl_req = kmalloc(YUREX_BUF_SIZE, GFP_KERNEL);
+	if (!dev->cntl_req)
+		goto error;
+
+	/* allocate buffer for control msg */
+	dev->cntl_buffer = usb_alloc_coherent(dev->udev, YUREX_BUF_SIZE,
+					      GFP_KERNEL,
+					      &dev->cntl_urb->transfer_dma);
+	if (!dev->cntl_buffer) {
+		dev_err(&interface->dev, "Could not allocate cntl_buffer\n");
+		goto error;
+	}
+
+	/* configure control URB */
+	dev->cntl_req->bRequestType = USB_DIR_OUT | USB_TYPE_CLASS |
+				      USB_RECIP_INTERFACE;
+	dev->cntl_req->bRequest	= HID_REQ_SET_REPORT;
+	dev->cntl_req->wValue	= cpu_to_le16((HID_OUTPUT_REPORT + 1) << 8);
+	dev->cntl_req->wIndex	= cpu_to_le16(iface_desc->desc.bInterfaceNumber);
+	dev->cntl_req->wLength	= cpu_to_le16(YUREX_BUF_SIZE);
+
+	usb_fill_control_urb(dev->cntl_urb, dev->udev,
+			     usb_sndctrlpipe(dev->udev, 0),
+			     (void *)dev->cntl_req, dev->cntl_buffer,
+			     YUREX_BUF_SIZE, yurex_control_callback, dev);
+	dev->cntl_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+
+	/* allocate interrupt URB */
+	dev->urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->urb)
+		goto error;
+
+	/* allocate buffer for interrupt in */
+	dev->int_buffer = usb_alloc_coherent(dev->udev, YUREX_BUF_SIZE,
+					GFP_KERNEL, &dev->urb->transfer_dma);
+	if (!dev->int_buffer) {
+		dev_err(&interface->dev, "Could not allocate int_buffer\n");
+		goto error;
+	}
+
+	/* configure interrupt URB */
+	usb_fill_int_urb(dev->urb, dev->udev,
+			 usb_rcvintpipe(dev->udev, dev->int_in_endpointAddr),
+			 dev->int_buffer, YUREX_BUF_SIZE, yurex_interrupt,
+			 dev, 1);
+	dev->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	if (usb_submit_urb(dev->urb, GFP_KERNEL)) {
+		retval = -EIO;
+		dev_err(&interface->dev, "Could not submitting URB\n");
+		goto error;
+	}
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, dev);
+	dev->bbu = -1;
+
+	/* we can register the device now, as it is ready */
+	retval = usb_register_dev(interface, &yurex_class);
+	if (retval) {
+		dev_err(&interface->dev,
+			"Not able to get a minor for this device.\n");
+		usb_set_intfdata(interface, NULL);
+		goto error;
+	}
+
+	dev_info(&interface->dev,
+		 "USB YUREX device now attached to Yurex #%d\n",
+		 interface->minor);
+
+	return 0;
+
+error:
+	if (dev)
+		/* this frees allocated memory */
+		kref_put(&dev->kref, yurex_delete);
+	return retval;
+}
+
+static void yurex_disconnect(struct usb_interface *interface)
+{
+	struct usb_yurex *dev;
+	int minor = interface->minor;
+
+	dev = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
+
+	/* give back our minor */
+	usb_deregister_dev(interface, &yurex_class);
+
+	/* prevent more I/O from starting */
+	usb_poison_urb(dev->urb);
+	usb_poison_urb(dev->cntl_urb);
+	mutex_lock(&dev->io_mutex);
+	dev->disconnected = 1;
+	mutex_unlock(&dev->io_mutex);
+
+	/* wakeup waiters */
+	kill_fasync(&dev->async_queue, SIGIO, POLL_IN);
+	wake_up_interruptible(&dev->waitq);
+
+	/* decrement our usage count */
+	kref_put(&dev->kref, yurex_delete);
+
+	dev_info(&interface->dev, "USB YUREX #%d now disconnected\n", minor);
+}
+
+static struct usb_driver yurex_driver = {
+	.name =		"yurex",
+	.probe =	yurex_probe,
+	.disconnect =	yurex_disconnect,
+	.id_table =	yurex_table,
+};
+
+
+static int yurex_fasync(int fd, struct file *file, int on)
+{
+	struct usb_yurex *dev;
+
+	dev = file->private_data;
+	return fasync_helper(fd, file, on, &dev->async_queue);
+}
+
+static int yurex_open(struct inode *inode, struct file *file)
+{
+	struct usb_yurex *dev;
+	struct usb_interface *interface;
+	int subminor;
+	int retval = 0;
+
+	subminor = iminor(inode);
+
+	interface = usb_find_interface(&yurex_driver, subminor);
+	if (!interface) {
+		printk(KERN_ERR "%s - error, can't find device for minor %d",
+		       __func__, subminor);
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	dev = usb_get_intfdata(interface);
+	if (!dev) {
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	/* increment our usage count for the device */
+	kref_get(&dev->kref);
+
+	/* save our object in the file's private structure */
+	mutex_lock(&dev->io_mutex);
+	file->private_data = dev;
+	mutex_unlock(&dev->io_mutex);
+
+exit:
+	return retval;
+}
+
+static int yurex_release(struct inode *inode, struct file *file)
+{
+	struct usb_yurex *dev;
+
+	dev = file->private_data;
+	if (dev == NULL)
+		return -ENODEV;
+
+	/* decrement the count on our device */
+	kref_put(&dev->kref, yurex_delete);
+	return 0;
+}
+
+static ssize_t yurex_read(struct file *file, char __user *buffer, size_t count,
+			  loff_t *ppos)
+{
+	struct usb_yurex *dev;
+	int len = 0;
+	char in_buffer[20];
+	unsigned long flags;
+
+	dev = file->private_data;
+
+	mutex_lock(&dev->io_mutex);
+	if (dev->disconnected) {		/* already disconnected */
+		mutex_unlock(&dev->io_mutex);
+		return -ENODEV;
+	}
+
+	spin_lock_irqsave(&dev->lock, flags);
+	len = snprintf(in_buffer, 20, "%lld\n", dev->bbu);
+	spin_unlock_irqrestore(&dev->lock, flags);
+	mutex_unlock(&dev->io_mutex);
+
+	if (WARN_ON_ONCE(len >= sizeof(in_buffer)))
+		return -EIO;
+
+	return simple_read_from_buffer(buffer, count, ppos, in_buffer, len);
+}
+
+static ssize_t yurex_write(struct file *file, const char __user *user_buffer,
+			   size_t count, loff_t *ppos)
+{
+	struct usb_yurex *dev;
+	int i, set = 0, retval = 0;
+	char buffer[16 + 1];
+	char *data = buffer;
+	unsigned long long c, c2 = 0;
+	signed long timeout = 0;
+	DEFINE_WAIT(wait);
+
+	count = min(sizeof(buffer) - 1, count);
+	dev = file->private_data;
+
+	/* verify that we actually have some data to write */
+	if (count == 0)
+		goto error;
+
+	mutex_lock(&dev->io_mutex);
+	if (dev->disconnected) {		/* already disconnected */
+		mutex_unlock(&dev->io_mutex);
+		retval = -ENODEV;
+		goto error;
+	}
+
+	if (copy_from_user(buffer, user_buffer, count)) {
+		mutex_unlock(&dev->io_mutex);
+		retval = -EFAULT;
+		goto error;
+	}
+	buffer[count] = 0;
+	memset(dev->cntl_buffer, CMD_PADDING, YUREX_BUF_SIZE);
+
+	switch (buffer[0]) {
+	case CMD_ANIMATE:
+	case CMD_LED:
+		dev->cntl_buffer[0] = buffer[0];
+		dev->cntl_buffer[1] = buffer[1];
+		dev->cntl_buffer[2] = CMD_EOF;
+		break;
+	case CMD_READ:
+	case CMD_VERSION:
+		dev->cntl_buffer[0] = buffer[0];
+		dev->cntl_buffer[1] = 0x00;
+		dev->cntl_buffer[2] = CMD_EOF;
+		break;
+	case CMD_SET:
+		data++;
+		fallthrough;
+	case '0' ... '9':
+		set = 1;
+		c = c2 = simple_strtoull(data, NULL, 0);
+		dev->cntl_buffer[0] = CMD_SET;
+		for (i = 1; i < 6; i++) {
+			dev->cntl_buffer[i] = (c>>32) & 0xff;
+			c <<= 8;
+		}
+		buffer[6] = CMD_EOF;
+		break;
+	default:
+		mutex_unlock(&dev->io_mutex);
+		return -EINVAL;
+	}
+
+	/* send the data as the control msg */
+	prepare_to_wait(&dev->waitq, &wait, TASK_INTERRUPTIBLE);
+	dev_dbg(&dev->interface->dev, "%s - submit %c\n", __func__,
+		dev->cntl_buffer[0]);
+	retval = usb_submit_urb(dev->cntl_urb, GFP_ATOMIC);
+	if (retval >= 0)
+		timeout = schedule_timeout(YUREX_WRITE_TIMEOUT);
+	finish_wait(&dev->waitq, &wait);
+
+	/* make sure URB is idle after timeout or (spurious) CMD_ACK */
+	usb_kill_urb(dev->cntl_urb);
+
+	mutex_unlock(&dev->io_mutex);
+
+	if (retval < 0) {
+		dev_err(&dev->interface->dev,
+			"%s - failed to send bulk msg, error %d\n",
+			__func__, retval);
+		goto error;
+	}
+	if (set && timeout)
+		dev->bbu = c2;
+	return timeout ? count : -EIO;
+
+error:
+	return retval;
+}
+
+static const struct file_operations yurex_fops = {
+	.owner =	THIS_MODULE,
+	.read =		yurex_read,
+	.write =	yurex_write,
+	.open =		yurex_open,
+	.release =	yurex_release,
+	.fasync	=	yurex_fasync,
+	.llseek =	default_llseek,
+};
+
+module_usb_driver(yurex_driver);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/mon/Kconfig b/drivers/usb/mon/Kconfig
new file mode 100644
index 000000000..ffc7cd422
--- /dev/null
+++ b/drivers/usb/mon/Kconfig
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Monitor configuration
+#
+
+config USB_MON
+	tristate "USB Monitor"
+	help
+	  If you select this option, a component which captures the USB traffic
+	  between peripheral-specific drivers and HC drivers will be built.
+	  For more information, see <file:Documentation/usb/usbmon.rst>.
+
+	  If unsure, say Y, if allowed, otherwise M.
diff --git a/drivers/usb/mon/Makefile b/drivers/usb/mon/Makefile
new file mode 100644
index 000000000..09f43e896
--- /dev/null
+++ b/drivers/usb/mon/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for USB monitor
+#
+
+usbmon-y := mon_main.o mon_stat.o mon_text.o mon_bin.o
+
+obj-$(CONFIG_USB_MON)	+= usbmon.o
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
new file mode 100644
index 000000000..35483217b
--- /dev/null
+++ b/drivers/usb/mon/mon_bin.c
@@ -0,0 +1,1420 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The USB Monitor, inspired by Dave Harding's USBMon.
+ *
+ * This is a binary format reader.
+ *
+ * Copyright (C) 2006 Paolo Abeni (paolo.abeni@email.it)
+ * Copyright (C) 2006,2007 Pete Zaitcev (zaitcev@redhat.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched/signal.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/export.h>
+#include <linux/usb.h>
+#include <linux/poll.h>
+#include <linux/compat.h>
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+#include <linux/time64.h>
+
+#include <linux/uaccess.h>
+
+#include "usb_mon.h"
+
+/*
+ * Defined by USB 2.0 clause 9.3, table 9.2.
+ */
+#define SETUP_LEN  8
+
+/* ioctl macros */
+#define MON_IOC_MAGIC 0x92
+
+#define MON_IOCQ_URB_LEN _IO(MON_IOC_MAGIC, 1)
+/* #2 used to be MON_IOCX_URB, removed before it got into Linus tree */
+#define MON_IOCG_STATS _IOR(MON_IOC_MAGIC, 3, struct mon_bin_stats)
+#define MON_IOCT_RING_SIZE _IO(MON_IOC_MAGIC, 4)
+#define MON_IOCQ_RING_SIZE _IO(MON_IOC_MAGIC, 5)
+#define MON_IOCX_GET   _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get)
+#define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch)
+#define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8)
+/* #9 was MON_IOCT_SETAPI */
+#define MON_IOCX_GETX   _IOW(MON_IOC_MAGIC, 10, struct mon_bin_get)
+
+#ifdef CONFIG_COMPAT
+#define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32)
+#define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32)
+#define MON_IOCX_GETX32   _IOW(MON_IOC_MAGIC, 10, struct mon_bin_get32)
+#endif
+
+/*
+ * Some architectures have enormous basic pages (16KB for ia64, 64KB for ppc).
+ * But it's all right. Just use a simple way to make sure the chunk is never
+ * smaller than a page.
+ *
+ * N.B. An application does not know our chunk size.
+ *
+ * Woops, get_zeroed_page() returns a single page. I guess we're stuck with
+ * page-sized chunks for the time being.
+ */
+#define CHUNK_SIZE   PAGE_SIZE
+#define CHUNK_ALIGN(x)   (((x)+CHUNK_SIZE-1) & ~(CHUNK_SIZE-1))
+
+/*
+ * The magic limit was calculated so that it allows the monitoring
+ * application to pick data once in two ticks. This way, another application,
+ * which presumably drives the bus, gets to hog CPU, yet we collect our data.
+ * If HZ is 100, a 480 mbit/s bus drives 614 KB every jiffy. USB has an
+ * enormous overhead built into the bus protocol, so we need about 1000 KB.
+ *
+ * This is still too much for most cases, where we just snoop a few
+ * descriptor fetches for enumeration. So, the default is a "reasonable"
+ * amount for systems with HZ=250 and incomplete bus saturation.
+ *
+ * XXX What about multi-megabyte URBs which take minutes to transfer?
+ */
+#define BUFF_MAX  CHUNK_ALIGN(1200*1024)
+#define BUFF_DFL   CHUNK_ALIGN(300*1024)
+#define BUFF_MIN     CHUNK_ALIGN(8*1024)
+
+/*
+ * The per-event API header (2 per URB).
+ *
+ * This structure is seen in userland as defined by the documentation.
+ */
+struct mon_bin_hdr {
+	u64 id;			/* URB ID - from submission to callback */
+	unsigned char type;	/* Same as in text API; extensible. */
+	unsigned char xfer_type;	/* ISO, Intr, Control, Bulk */
+	unsigned char epnum;	/* Endpoint number and transfer direction */
+	unsigned char devnum;	/* Device address */
+	unsigned short busnum;	/* Bus number */
+	char flag_setup;
+	char flag_data;
+	s64 ts_sec;		/* ktime_get_real_ts64 */
+	s32 ts_usec;		/* ktime_get_real_ts64 */
+	int status;
+	unsigned int len_urb;	/* Length of data (submitted or actual) */
+	unsigned int len_cap;	/* Delivered length */
+	union {
+		unsigned char setup[SETUP_LEN];	/* Only for Control S-type */
+		struct iso_rec {
+			int error_count;
+			int numdesc;
+		} iso;
+	} s;
+	int interval;
+	int start_frame;
+	unsigned int xfer_flags;
+	unsigned int ndesc;	/* Actual number of ISO descriptors */
+};
+
+/*
+ * ISO vector, packed into the head of data stream.
+ * This has to take 16 bytes to make sure that the end of buffer
+ * wrap is not happening in the middle of a descriptor.
+ */
+struct mon_bin_isodesc {
+	int          iso_status;
+	unsigned int iso_off;
+	unsigned int iso_len;
+	u32 _pad;
+};
+
+/* per file statistic */
+struct mon_bin_stats {
+	u32 queued;
+	u32 dropped;
+};
+
+struct mon_bin_get {
+	struct mon_bin_hdr __user *hdr;	/* Can be 48 bytes or 64. */
+	void __user *data;
+	size_t alloc;		/* Length of data (can be zero) */
+};
+
+struct mon_bin_mfetch {
+	u32 __user *offvec;	/* Vector of events fetched */
+	u32 nfetch;		/* Number of events to fetch (out: fetched) */
+	u32 nflush;		/* Number of events to flush */
+};
+
+#ifdef CONFIG_COMPAT
+struct mon_bin_get32 {
+	u32 hdr32;
+	u32 data32;
+	u32 alloc32;
+};
+
+struct mon_bin_mfetch32 {
+        u32 offvec32;
+        u32 nfetch32;
+        u32 nflush32;
+};
+#endif
+
+/* Having these two values same prevents wrapping of the mon_bin_hdr */
+#define PKT_ALIGN   64
+#define PKT_SIZE    64
+
+#define PKT_SZ_API0 48	/* API 0 (2.6.20) size */
+#define PKT_SZ_API1 64	/* API 1 size: extra fields */
+
+#define ISODESC_MAX   128	/* Same number as usbfs allows, 2048 bytes. */
+
+/* max number of USB bus supported */
+#define MON_BIN_MAX_MINOR 128
+
+/*
+ * The buffer: map of used pages.
+ */
+struct mon_pgmap {
+	struct page *pg;
+	unsigned char *ptr;	/* XXX just use page_to_virt everywhere? */
+};
+
+/*
+ * This gets associated with an open file struct.
+ */
+struct mon_reader_bin {
+	/* The buffer: one per open. */
+	spinlock_t b_lock;		/* Protect b_cnt, b_in */
+	unsigned int b_size;		/* Current size of the buffer - bytes */
+	unsigned int b_cnt;		/* Bytes used */
+	unsigned int b_in, b_out;	/* Offsets into buffer - bytes */
+	unsigned int b_read;		/* Amount of read data in curr. pkt. */
+	struct mon_pgmap *b_vec;	/* The map array */
+	wait_queue_head_t b_wait;	/* Wait for data here */
+
+	struct mutex fetch_lock;	/* Protect b_read, b_out */
+	int mmap_active;
+
+	/* A list of these is needed for "bus 0". Some time later. */
+	struct mon_reader r;
+
+	/* Stats */
+	unsigned int cnt_lost;
+};
+
+static inline struct mon_bin_hdr *MON_OFF2HDR(const struct mon_reader_bin *rp,
+    unsigned int offset)
+{
+	return (struct mon_bin_hdr *)
+	    (rp->b_vec[offset / CHUNK_SIZE].ptr + offset % CHUNK_SIZE);
+}
+
+#define MON_RING_EMPTY(rp)	((rp)->b_cnt == 0)
+
+static unsigned char xfer_to_pipe[4] = {
+	PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
+};
+
+static struct class *mon_bin_class;
+static dev_t mon_bin_dev0;
+static struct cdev mon_bin_cdev;
+
+static void mon_buff_area_fill(const struct mon_reader_bin *rp,
+    unsigned int offset, unsigned int size);
+static int mon_bin_wait_event(struct file *file, struct mon_reader_bin *rp);
+static int mon_alloc_buff(struct mon_pgmap *map, int npages);
+static void mon_free_buff(struct mon_pgmap *map, int npages);
+
+/*
+ * This is a "chunked memcpy". It does not manipulate any counters.
+ */
+static unsigned int mon_copy_to_buff(const struct mon_reader_bin *this,
+    unsigned int off, const unsigned char *from, unsigned int length)
+{
+	unsigned int step_len;
+	unsigned char *buf;
+	unsigned int in_page;
+
+	while (length) {
+		/*
+		 * Determine step_len.
+		 */
+		step_len = length;
+		in_page = CHUNK_SIZE - (off & (CHUNK_SIZE-1));
+		if (in_page < step_len)
+			step_len = in_page;
+
+		/*
+		 * Copy data and advance pointers.
+		 */
+		buf = this->b_vec[off / CHUNK_SIZE].ptr + off % CHUNK_SIZE;
+		memcpy(buf, from, step_len);
+		if ((off += step_len) >= this->b_size) off = 0;
+		from += step_len;
+		length -= step_len;
+	}
+	return off;
+}
+
+/*
+ * This is a little worse than the above because it's "chunked copy_to_user".
+ * The return value is an error code, not an offset.
+ */
+static int copy_from_buf(const struct mon_reader_bin *this, unsigned int off,
+    char __user *to, int length)
+{
+	unsigned int step_len;
+	unsigned char *buf;
+	unsigned int in_page;
+
+	while (length) {
+		/*
+		 * Determine step_len.
+		 */
+		step_len = length;
+		in_page = CHUNK_SIZE - (off & (CHUNK_SIZE-1));
+		if (in_page < step_len)
+			step_len = in_page;
+
+		/*
+		 * Copy data and advance pointers.
+		 */
+		buf = this->b_vec[off / CHUNK_SIZE].ptr + off % CHUNK_SIZE;
+		if (copy_to_user(to, buf, step_len))
+			return -EINVAL;
+		if ((off += step_len) >= this->b_size) off = 0;
+		to += step_len;
+		length -= step_len;
+	}
+	return 0;
+}
+
+/*
+ * Allocate an (aligned) area in the buffer.
+ * This is called under b_lock.
+ * Returns ~0 on failure.
+ */
+static unsigned int mon_buff_area_alloc(struct mon_reader_bin *rp,
+    unsigned int size)
+{
+	unsigned int offset;
+
+	size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+	if (rp->b_cnt + size > rp->b_size)
+		return ~0;
+	offset = rp->b_in;
+	rp->b_cnt += size;
+	if ((rp->b_in += size) >= rp->b_size)
+		rp->b_in -= rp->b_size;
+	return offset;
+}
+
+/*
+ * This is the same thing as mon_buff_area_alloc, only it does not allow
+ * buffers to wrap. This is needed by applications which pass references
+ * into mmap-ed buffers up their stacks (libpcap can do that).
+ *
+ * Currently, we always have the header stuck with the data, although
+ * it is not strictly speaking necessary.
+ *
+ * When a buffer would wrap, we place a filler packet to mark the space.
+ */
+static unsigned int mon_buff_area_alloc_contiguous(struct mon_reader_bin *rp,
+    unsigned int size)
+{
+	unsigned int offset;
+	unsigned int fill_size;
+
+	size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+	if (rp->b_cnt + size > rp->b_size)
+		return ~0;
+	if (rp->b_in + size > rp->b_size) {
+		/*
+		 * This would wrap. Find if we still have space after
+		 * skipping to the end of the buffer. If we do, place
+		 * a filler packet and allocate a new packet.
+		 */
+		fill_size = rp->b_size - rp->b_in;
+		if (rp->b_cnt + size + fill_size > rp->b_size)
+			return ~0;
+		mon_buff_area_fill(rp, rp->b_in, fill_size);
+
+		offset = 0;
+		rp->b_in = size;
+		rp->b_cnt += size + fill_size;
+	} else if (rp->b_in + size == rp->b_size) {
+		offset = rp->b_in;
+		rp->b_in = 0;
+		rp->b_cnt += size;
+	} else {
+		offset = rp->b_in;
+		rp->b_in += size;
+		rp->b_cnt += size;
+	}
+	return offset;
+}
+
+/*
+ * Return a few (kilo-)bytes to the head of the buffer.
+ * This is used if a data fetch fails.
+ */
+static void mon_buff_area_shrink(struct mon_reader_bin *rp, unsigned int size)
+{
+
+	/* size &= ~(PKT_ALIGN-1);  -- we're called with aligned size */
+	rp->b_cnt -= size;
+	if (rp->b_in < size)
+		rp->b_in += rp->b_size;
+	rp->b_in -= size;
+}
+
+/*
+ * This has to be called under both b_lock and fetch_lock, because
+ * it accesses both b_cnt and b_out.
+ */
+static void mon_buff_area_free(struct mon_reader_bin *rp, unsigned int size)
+{
+
+	size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+	rp->b_cnt -= size;
+	if ((rp->b_out += size) >= rp->b_size)
+		rp->b_out -= rp->b_size;
+}
+
+static void mon_buff_area_fill(const struct mon_reader_bin *rp,
+    unsigned int offset, unsigned int size)
+{
+	struct mon_bin_hdr *ep;
+
+	ep = MON_OFF2HDR(rp, offset);
+	memset(ep, 0, PKT_SIZE);
+	ep->type = '@';
+	ep->len_cap = size - PKT_SIZE;
+}
+
+static inline char mon_bin_get_setup(unsigned char *setupb,
+    const struct urb *urb, char ev_type)
+{
+
+	if (urb->setup_packet == NULL)
+		return 'Z';
+	memcpy(setupb, urb->setup_packet, SETUP_LEN);
+	return 0;
+}
+
+static unsigned int mon_bin_get_data(const struct mon_reader_bin *rp,
+    unsigned int offset, struct urb *urb, unsigned int length,
+    char *flag)
+{
+	int i;
+	struct scatterlist *sg;
+	unsigned int this_len;
+
+	*flag = 0;
+	if (urb->num_sgs == 0) {
+		if (urb->transfer_buffer == NULL) {
+			*flag = 'Z';
+			return length;
+		}
+		mon_copy_to_buff(rp, offset, urb->transfer_buffer, length);
+		length = 0;
+
+	} else {
+		/* If IOMMU coalescing occurred, we cannot trust sg_page */
+		if (urb->transfer_flags & URB_DMA_SG_COMBINED) {
+			*flag = 'D';
+			return length;
+		}
+
+		/* Copy up to the first non-addressable segment */
+		for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+			if (length == 0 || PageHighMem(sg_page(sg)))
+				break;
+			this_len = min_t(unsigned int, sg->length, length);
+			offset = mon_copy_to_buff(rp, offset, sg_virt(sg),
+					this_len);
+			length -= this_len;
+		}
+		if (i == 0)
+			*flag = 'D';
+	}
+
+	return length;
+}
+
+/*
+ * This is the look-ahead pass in case of 'C Zi', when actual_length cannot
+ * be used to determine the length of the whole contiguous buffer.
+ */
+static unsigned int mon_bin_collate_isodesc(const struct mon_reader_bin *rp,
+    struct urb *urb, unsigned int ndesc)
+{
+	struct usb_iso_packet_descriptor *fp;
+	unsigned int length;
+
+	length = 0;
+	fp = urb->iso_frame_desc;
+	while (ndesc-- != 0) {
+		if (fp->actual_length != 0) {
+			if (fp->offset + fp->actual_length > length)
+				length = fp->offset + fp->actual_length;
+		}
+		fp++;
+	}
+	return length;
+}
+
+static void mon_bin_get_isodesc(const struct mon_reader_bin *rp,
+    unsigned int offset, struct urb *urb, char ev_type, unsigned int ndesc)
+{
+	struct mon_bin_isodesc *dp;
+	struct usb_iso_packet_descriptor *fp;
+
+	fp = urb->iso_frame_desc;
+	while (ndesc-- != 0) {
+		dp = (struct mon_bin_isodesc *)
+		    (rp->b_vec[offset / CHUNK_SIZE].ptr + offset % CHUNK_SIZE);
+		dp->iso_status = fp->status;
+		dp->iso_off = fp->offset;
+		dp->iso_len = (ev_type == 'S') ? fp->length : fp->actual_length;
+		dp->_pad = 0;
+		if ((offset += sizeof(struct mon_bin_isodesc)) >= rp->b_size)
+			offset = 0;
+		fp++;
+	}
+}
+
+static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
+    char ev_type, int status)
+{
+	const struct usb_endpoint_descriptor *epd = &urb->ep->desc;
+	struct timespec64 ts;
+	unsigned long flags;
+	unsigned int urb_length;
+	unsigned int offset;
+	unsigned int length;
+	unsigned int delta;
+	unsigned int ndesc, lendesc;
+	unsigned char dir;
+	struct mon_bin_hdr *ep;
+	char data_tag = 0;
+
+	ktime_get_real_ts64(&ts);
+
+	spin_lock_irqsave(&rp->b_lock, flags);
+
+	/*
+	 * Find the maximum allowable length, then allocate space.
+	 */
+	urb_length = (ev_type == 'S') ?
+	    urb->transfer_buffer_length : urb->actual_length;
+	length = urb_length;
+
+	if (usb_endpoint_xfer_isoc(epd)) {
+		if (urb->number_of_packets < 0) {
+			ndesc = 0;
+		} else if (urb->number_of_packets >= ISODESC_MAX) {
+			ndesc = ISODESC_MAX;
+		} else {
+			ndesc = urb->number_of_packets;
+		}
+		if (ev_type == 'C' && usb_urb_dir_in(urb))
+			length = mon_bin_collate_isodesc(rp, urb, ndesc);
+	} else {
+		ndesc = 0;
+	}
+	lendesc = ndesc*sizeof(struct mon_bin_isodesc);
+
+	/* not an issue unless there's a subtle bug in a HCD somewhere */
+	if (length >= urb->transfer_buffer_length)
+		length = urb->transfer_buffer_length;
+
+	if (length >= rp->b_size/5)
+		length = rp->b_size/5;
+
+	if (usb_urb_dir_in(urb)) {
+		if (ev_type == 'S') {
+			length = 0;
+			data_tag = '<';
+		}
+		/* Cannot rely on endpoint number in case of control ep.0 */
+		dir = USB_DIR_IN;
+	} else {
+		if (ev_type == 'C') {
+			length = 0;
+			data_tag = '>';
+		}
+		dir = 0;
+	}
+
+	if (rp->mmap_active) {
+		offset = mon_buff_area_alloc_contiguous(rp,
+						 length + PKT_SIZE + lendesc);
+	} else {
+		offset = mon_buff_area_alloc(rp, length + PKT_SIZE + lendesc);
+	}
+	if (offset == ~0) {
+		rp->cnt_lost++;
+		spin_unlock_irqrestore(&rp->b_lock, flags);
+		return;
+	}
+
+	ep = MON_OFF2HDR(rp, offset);
+	if ((offset += PKT_SIZE) >= rp->b_size) offset = 0;
+
+	/*
+	 * Fill the allocated area.
+	 */
+	memset(ep, 0, PKT_SIZE);
+	ep->type = ev_type;
+	ep->xfer_type = xfer_to_pipe[usb_endpoint_type(epd)];
+	ep->epnum = dir | usb_endpoint_num(epd);
+	ep->devnum = urb->dev->devnum;
+	ep->busnum = urb->dev->bus->busnum;
+	ep->id = (unsigned long) urb;
+	ep->ts_sec = ts.tv_sec;
+	ep->ts_usec = ts.tv_nsec / NSEC_PER_USEC;
+	ep->status = status;
+	ep->len_urb = urb_length;
+	ep->len_cap = length + lendesc;
+	ep->xfer_flags = urb->transfer_flags;
+
+	if (usb_endpoint_xfer_int(epd)) {
+		ep->interval = urb->interval;
+	} else if (usb_endpoint_xfer_isoc(epd)) {
+		ep->interval = urb->interval;
+		ep->start_frame = urb->start_frame;
+		ep->s.iso.error_count = urb->error_count;
+		ep->s.iso.numdesc = urb->number_of_packets;
+	}
+
+	if (usb_endpoint_xfer_control(epd) && ev_type == 'S') {
+		ep->flag_setup = mon_bin_get_setup(ep->s.setup, urb, ev_type);
+	} else {
+		ep->flag_setup = '-';
+	}
+
+	if (ndesc != 0) {
+		ep->ndesc = ndesc;
+		mon_bin_get_isodesc(rp, offset, urb, ev_type, ndesc);
+		if ((offset += lendesc) >= rp->b_size)
+			offset -= rp->b_size;
+	}
+
+	if (length != 0) {
+		length = mon_bin_get_data(rp, offset, urb, length,
+				&ep->flag_data);
+		if (length > 0) {
+			delta = (ep->len_cap + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+			ep->len_cap -= length;
+			delta -= (ep->len_cap + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+			mon_buff_area_shrink(rp, delta);
+		}
+	} else {
+		ep->flag_data = data_tag;
+	}
+
+	spin_unlock_irqrestore(&rp->b_lock, flags);
+
+	wake_up(&rp->b_wait);
+}
+
+static void mon_bin_submit(void *data, struct urb *urb)
+{
+	struct mon_reader_bin *rp = data;
+	mon_bin_event(rp, urb, 'S', -EINPROGRESS);
+}
+
+static void mon_bin_complete(void *data, struct urb *urb, int status)
+{
+	struct mon_reader_bin *rp = data;
+	mon_bin_event(rp, urb, 'C', status);
+}
+
+static void mon_bin_error(void *data, struct urb *urb, int error)
+{
+	struct mon_reader_bin *rp = data;
+	struct timespec64 ts;
+	unsigned long flags;
+	unsigned int offset;
+	struct mon_bin_hdr *ep;
+
+	ktime_get_real_ts64(&ts);
+
+	spin_lock_irqsave(&rp->b_lock, flags);
+
+	offset = mon_buff_area_alloc(rp, PKT_SIZE);
+	if (offset == ~0) {
+		/* Not incrementing cnt_lost. Just because. */
+		spin_unlock_irqrestore(&rp->b_lock, flags);
+		return;
+	}
+
+	ep = MON_OFF2HDR(rp, offset);
+
+	memset(ep, 0, PKT_SIZE);
+	ep->type = 'E';
+	ep->xfer_type = xfer_to_pipe[usb_endpoint_type(&urb->ep->desc)];
+	ep->epnum = usb_urb_dir_in(urb) ? USB_DIR_IN : 0;
+	ep->epnum |= usb_endpoint_num(&urb->ep->desc);
+	ep->devnum = urb->dev->devnum;
+	ep->busnum = urb->dev->bus->busnum;
+	ep->id = (unsigned long) urb;
+	ep->ts_sec = ts.tv_sec;
+	ep->ts_usec = ts.tv_nsec / NSEC_PER_USEC;
+	ep->status = error;
+
+	ep->flag_setup = '-';
+	ep->flag_data = 'E';
+
+	spin_unlock_irqrestore(&rp->b_lock, flags);
+
+	wake_up(&rp->b_wait);
+}
+
+static int mon_bin_open(struct inode *inode, struct file *file)
+{
+	struct mon_bus *mbus;
+	struct mon_reader_bin *rp;
+	size_t size;
+	int rc;
+
+	mutex_lock(&mon_lock);
+	mbus = mon_bus_lookup(iminor(inode));
+	if (mbus == NULL) {
+		mutex_unlock(&mon_lock);
+		return -ENODEV;
+	}
+	if (mbus != &mon_bus0 && mbus->u_bus == NULL) {
+		printk(KERN_ERR TAG ": consistency error on open\n");
+		mutex_unlock(&mon_lock);
+		return -ENODEV;
+	}
+
+	rp = kzalloc(sizeof(struct mon_reader_bin), GFP_KERNEL);
+	if (rp == NULL) {
+		rc = -ENOMEM;
+		goto err_alloc;
+	}
+	spin_lock_init(&rp->b_lock);
+	init_waitqueue_head(&rp->b_wait);
+	mutex_init(&rp->fetch_lock);
+	rp->b_size = BUFF_DFL;
+
+	size = sizeof(struct mon_pgmap) * (rp->b_size/CHUNK_SIZE);
+	if ((rp->b_vec = kzalloc(size, GFP_KERNEL)) == NULL) {
+		rc = -ENOMEM;
+		goto err_allocvec;
+	}
+
+	if ((rc = mon_alloc_buff(rp->b_vec, rp->b_size/CHUNK_SIZE)) < 0)
+		goto err_allocbuff;
+
+	rp->r.m_bus = mbus;
+	rp->r.r_data = rp;
+	rp->r.rnf_submit = mon_bin_submit;
+	rp->r.rnf_error = mon_bin_error;
+	rp->r.rnf_complete = mon_bin_complete;
+
+	mon_reader_add(mbus, &rp->r);
+
+	file->private_data = rp;
+	mutex_unlock(&mon_lock);
+	return 0;
+
+err_allocbuff:
+	kfree(rp->b_vec);
+err_allocvec:
+	kfree(rp);
+err_alloc:
+	mutex_unlock(&mon_lock);
+	return rc;
+}
+
+/*
+ * Extract an event from buffer and copy it to user space.
+ * Wait if there is no event ready.
+ * Returns zero or error.
+ */
+static int mon_bin_get_event(struct file *file, struct mon_reader_bin *rp,
+    struct mon_bin_hdr __user *hdr, unsigned int hdrbytes,
+    void __user *data, unsigned int nbytes)
+{
+	unsigned long flags;
+	struct mon_bin_hdr *ep;
+	size_t step_len;
+	unsigned int offset;
+	int rc;
+
+	mutex_lock(&rp->fetch_lock);
+
+	if ((rc = mon_bin_wait_event(file, rp)) < 0) {
+		mutex_unlock(&rp->fetch_lock);
+		return rc;
+	}
+
+	ep = MON_OFF2HDR(rp, rp->b_out);
+
+	if (copy_to_user(hdr, ep, hdrbytes)) {
+		mutex_unlock(&rp->fetch_lock);
+		return -EFAULT;
+	}
+
+	step_len = min(ep->len_cap, nbytes);
+	if ((offset = rp->b_out + PKT_SIZE) >= rp->b_size) offset = 0;
+
+	if (copy_from_buf(rp, offset, data, step_len)) {
+		mutex_unlock(&rp->fetch_lock);
+		return -EFAULT;
+	}
+
+	spin_lock_irqsave(&rp->b_lock, flags);
+	mon_buff_area_free(rp, PKT_SIZE + ep->len_cap);
+	spin_unlock_irqrestore(&rp->b_lock, flags);
+	rp->b_read = 0;
+
+	mutex_unlock(&rp->fetch_lock);
+	return 0;
+}
+
+static int mon_bin_release(struct inode *inode, struct file *file)
+{
+	struct mon_reader_bin *rp = file->private_data;
+	struct mon_bus* mbus = rp->r.m_bus;
+
+	mutex_lock(&mon_lock);
+
+	if (mbus->nreaders <= 0) {
+		printk(KERN_ERR TAG ": consistency error on close\n");
+		mutex_unlock(&mon_lock);
+		return 0;
+	}
+	mon_reader_del(mbus, &rp->r);
+
+	mon_free_buff(rp->b_vec, rp->b_size/CHUNK_SIZE);
+	kfree(rp->b_vec);
+	kfree(rp);
+
+	mutex_unlock(&mon_lock);
+	return 0;
+}
+
+static ssize_t mon_bin_read(struct file *file, char __user *buf,
+    size_t nbytes, loff_t *ppos)
+{
+	struct mon_reader_bin *rp = file->private_data;
+	unsigned int hdrbytes = PKT_SZ_API0;
+	unsigned long flags;
+	struct mon_bin_hdr *ep;
+	unsigned int offset;
+	size_t step_len;
+	char *ptr;
+	ssize_t done = 0;
+	int rc;
+
+	mutex_lock(&rp->fetch_lock);
+
+	if ((rc = mon_bin_wait_event(file, rp)) < 0) {
+		mutex_unlock(&rp->fetch_lock);
+		return rc;
+	}
+
+	ep = MON_OFF2HDR(rp, rp->b_out);
+
+	if (rp->b_read < hdrbytes) {
+		step_len = min(nbytes, (size_t)(hdrbytes - rp->b_read));
+		ptr = ((char *)ep) + rp->b_read;
+		if (step_len && copy_to_user(buf, ptr, step_len)) {
+			mutex_unlock(&rp->fetch_lock);
+			return -EFAULT;
+		}
+		nbytes -= step_len;
+		buf += step_len;
+		rp->b_read += step_len;
+		done += step_len;
+	}
+
+	if (rp->b_read >= hdrbytes) {
+		step_len = ep->len_cap;
+		step_len -= rp->b_read - hdrbytes;
+		if (step_len > nbytes)
+			step_len = nbytes;
+		offset = rp->b_out + PKT_SIZE;
+		offset += rp->b_read - hdrbytes;
+		if (offset >= rp->b_size)
+			offset -= rp->b_size;
+		if (copy_from_buf(rp, offset, buf, step_len)) {
+			mutex_unlock(&rp->fetch_lock);
+			return -EFAULT;
+		}
+		nbytes -= step_len;
+		buf += step_len;
+		rp->b_read += step_len;
+		done += step_len;
+	}
+
+	/*
+	 * Check if whole packet was read, and if so, jump to the next one.
+	 */
+	if (rp->b_read >= hdrbytes + ep->len_cap) {
+		spin_lock_irqsave(&rp->b_lock, flags);
+		mon_buff_area_free(rp, PKT_SIZE + ep->len_cap);
+		spin_unlock_irqrestore(&rp->b_lock, flags);
+		rp->b_read = 0;
+	}
+
+	mutex_unlock(&rp->fetch_lock);
+	return done;
+}
+
+/*
+ * Remove at most nevents from chunked buffer.
+ * Returns the number of removed events.
+ */
+static int mon_bin_flush(struct mon_reader_bin *rp, unsigned nevents)
+{
+	unsigned long flags;
+	struct mon_bin_hdr *ep;
+	int i;
+
+	mutex_lock(&rp->fetch_lock);
+	spin_lock_irqsave(&rp->b_lock, flags);
+	for (i = 0; i < nevents; ++i) {
+		if (MON_RING_EMPTY(rp))
+			break;
+
+		ep = MON_OFF2HDR(rp, rp->b_out);
+		mon_buff_area_free(rp, PKT_SIZE + ep->len_cap);
+	}
+	spin_unlock_irqrestore(&rp->b_lock, flags);
+	rp->b_read = 0;
+	mutex_unlock(&rp->fetch_lock);
+	return i;
+}
+
+/*
+ * Fetch at most max event offsets into the buffer and put them into vec.
+ * The events are usually freed later with mon_bin_flush.
+ * Return the effective number of events fetched.
+ */
+static int mon_bin_fetch(struct file *file, struct mon_reader_bin *rp,
+    u32 __user *vec, unsigned int max)
+{
+	unsigned int cur_out;
+	unsigned int bytes, avail;
+	unsigned int size;
+	unsigned int nevents;
+	struct mon_bin_hdr *ep;
+	unsigned long flags;
+	int rc;
+
+	mutex_lock(&rp->fetch_lock);
+
+	if ((rc = mon_bin_wait_event(file, rp)) < 0) {
+		mutex_unlock(&rp->fetch_lock);
+		return rc;
+	}
+
+	spin_lock_irqsave(&rp->b_lock, flags);
+	avail = rp->b_cnt;
+	spin_unlock_irqrestore(&rp->b_lock, flags);
+
+	cur_out = rp->b_out;
+	nevents = 0;
+	bytes = 0;
+	while (bytes < avail) {
+		if (nevents >= max)
+			break;
+
+		ep = MON_OFF2HDR(rp, cur_out);
+		if (put_user(cur_out, &vec[nevents])) {
+			mutex_unlock(&rp->fetch_lock);
+			return -EFAULT;
+		}
+
+		nevents++;
+		size = ep->len_cap + PKT_SIZE;
+		size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+		if ((cur_out += size) >= rp->b_size)
+			cur_out -= rp->b_size;
+		bytes += size;
+	}
+
+	mutex_unlock(&rp->fetch_lock);
+	return nevents;
+}
+
+/*
+ * Count events. This is almost the same as the above mon_bin_fetch,
+ * only we do not store offsets into user vector, and we have no limit.
+ */
+static int mon_bin_queued(struct mon_reader_bin *rp)
+{
+	unsigned int cur_out;
+	unsigned int bytes, avail;
+	unsigned int size;
+	unsigned int nevents;
+	struct mon_bin_hdr *ep;
+	unsigned long flags;
+
+	mutex_lock(&rp->fetch_lock);
+
+	spin_lock_irqsave(&rp->b_lock, flags);
+	avail = rp->b_cnt;
+	spin_unlock_irqrestore(&rp->b_lock, flags);
+
+	cur_out = rp->b_out;
+	nevents = 0;
+	bytes = 0;
+	while (bytes < avail) {
+		ep = MON_OFF2HDR(rp, cur_out);
+
+		nevents++;
+		size = ep->len_cap + PKT_SIZE;
+		size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+		if ((cur_out += size) >= rp->b_size)
+			cur_out -= rp->b_size;
+		bytes += size;
+	}
+
+	mutex_unlock(&rp->fetch_lock);
+	return nevents;
+}
+
+/*
+ */
+static long mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct mon_reader_bin *rp = file->private_data;
+	// struct mon_bus* mbus = rp->r.m_bus;
+	int ret = 0;
+	struct mon_bin_hdr *ep;
+	unsigned long flags;
+
+	switch (cmd) {
+
+	case MON_IOCQ_URB_LEN:
+		/*
+		 * N.B. This only returns the size of data, without the header.
+		 */
+		spin_lock_irqsave(&rp->b_lock, flags);
+		if (!MON_RING_EMPTY(rp)) {
+			ep = MON_OFF2HDR(rp, rp->b_out);
+			ret = ep->len_cap;
+		}
+		spin_unlock_irqrestore(&rp->b_lock, flags);
+		break;
+
+	case MON_IOCQ_RING_SIZE:
+		mutex_lock(&rp->fetch_lock);
+		ret = rp->b_size;
+		mutex_unlock(&rp->fetch_lock);
+		break;
+
+	case MON_IOCT_RING_SIZE:
+		/*
+		 * Changing the buffer size will flush it's contents; the new
+		 * buffer is allocated before releasing the old one to be sure
+		 * the device will stay functional also in case of memory
+		 * pressure.
+		 */
+		{
+		int size;
+		struct mon_pgmap *vec;
+
+		if (arg < BUFF_MIN || arg > BUFF_MAX)
+			return -EINVAL;
+
+		size = CHUNK_ALIGN(arg);
+		vec = kcalloc(size / CHUNK_SIZE, sizeof(struct mon_pgmap),
+			      GFP_KERNEL);
+		if (vec == NULL) {
+			ret = -ENOMEM;
+			break;
+		}
+
+		ret = mon_alloc_buff(vec, size/CHUNK_SIZE);
+		if (ret < 0) {
+			kfree(vec);
+			break;
+		}
+
+		mutex_lock(&rp->fetch_lock);
+		spin_lock_irqsave(&rp->b_lock, flags);
+		if (rp->mmap_active) {
+			mon_free_buff(vec, size/CHUNK_SIZE);
+			kfree(vec);
+			ret = -EBUSY;
+		} else {
+			mon_free_buff(rp->b_vec, rp->b_size/CHUNK_SIZE);
+			kfree(rp->b_vec);
+			rp->b_vec  = vec;
+			rp->b_size = size;
+			rp->b_read = rp->b_in = rp->b_out = rp->b_cnt = 0;
+			rp->cnt_lost = 0;
+		}
+		spin_unlock_irqrestore(&rp->b_lock, flags);
+		mutex_unlock(&rp->fetch_lock);
+		}
+		break;
+
+	case MON_IOCH_MFLUSH:
+		ret = mon_bin_flush(rp, arg);
+		break;
+
+	case MON_IOCX_GET:
+	case MON_IOCX_GETX:
+		{
+		struct mon_bin_get getb;
+
+		if (copy_from_user(&getb, (void __user *)arg,
+					    sizeof(struct mon_bin_get)))
+			return -EFAULT;
+
+		if (getb.alloc > 0x10000000)	/* Want to cast to u32 */
+			return -EINVAL;
+		ret = mon_bin_get_event(file, rp, getb.hdr,
+		    (cmd == MON_IOCX_GET)? PKT_SZ_API0: PKT_SZ_API1,
+		    getb.data, (unsigned int)getb.alloc);
+		}
+		break;
+
+	case MON_IOCX_MFETCH:
+		{
+		struct mon_bin_mfetch mfetch;
+		struct mon_bin_mfetch __user *uptr;
+
+		uptr = (struct mon_bin_mfetch __user *)arg;
+
+		if (copy_from_user(&mfetch, uptr, sizeof(mfetch)))
+			return -EFAULT;
+
+		if (mfetch.nflush) {
+			ret = mon_bin_flush(rp, mfetch.nflush);
+			if (ret < 0)
+				return ret;
+			if (put_user(ret, &uptr->nflush))
+				return -EFAULT;
+		}
+		ret = mon_bin_fetch(file, rp, mfetch.offvec, mfetch.nfetch);
+		if (ret < 0)
+			return ret;
+		if (put_user(ret, &uptr->nfetch))
+			return -EFAULT;
+		ret = 0;
+		}
+		break;
+
+	case MON_IOCG_STATS: {
+		struct mon_bin_stats __user *sp;
+		unsigned int nevents;
+		unsigned int ndropped;
+
+		spin_lock_irqsave(&rp->b_lock, flags);
+		ndropped = rp->cnt_lost;
+		rp->cnt_lost = 0;
+		spin_unlock_irqrestore(&rp->b_lock, flags);
+		nevents = mon_bin_queued(rp);
+
+		sp = (struct mon_bin_stats __user *)arg;
+		if (put_user(ndropped, &sp->dropped))
+			return -EFAULT;
+		if (put_user(nevents, &sp->queued))
+			return -EFAULT;
+
+		}
+		break;
+
+	default:
+		return -ENOTTY;
+	}
+
+	return ret;
+}
+
+#ifdef CONFIG_COMPAT
+static long mon_bin_compat_ioctl(struct file *file,
+    unsigned int cmd, unsigned long arg)
+{
+	struct mon_reader_bin *rp = file->private_data;
+	int ret;
+
+	switch (cmd) {
+
+	case MON_IOCX_GET32:
+	case MON_IOCX_GETX32:
+		{
+		struct mon_bin_get32 getb;
+
+		if (copy_from_user(&getb, (void __user *)arg,
+					    sizeof(struct mon_bin_get32)))
+			return -EFAULT;
+
+		ret = mon_bin_get_event(file, rp, compat_ptr(getb.hdr32),
+		    (cmd == MON_IOCX_GET32)? PKT_SZ_API0: PKT_SZ_API1,
+		    compat_ptr(getb.data32), getb.alloc32);
+		if (ret < 0)
+			return ret;
+		}
+		return 0;
+
+	case MON_IOCX_MFETCH32:
+		{
+		struct mon_bin_mfetch32 mfetch;
+		struct mon_bin_mfetch32 __user *uptr;
+
+		uptr = (struct mon_bin_mfetch32 __user *) compat_ptr(arg);
+
+		if (copy_from_user(&mfetch, uptr, sizeof(mfetch)))
+			return -EFAULT;
+
+		if (mfetch.nflush32) {
+			ret = mon_bin_flush(rp, mfetch.nflush32);
+			if (ret < 0)
+				return ret;
+			if (put_user(ret, &uptr->nflush32))
+				return -EFAULT;
+		}
+		ret = mon_bin_fetch(file, rp, compat_ptr(mfetch.offvec32),
+		    mfetch.nfetch32);
+		if (ret < 0)
+			return ret;
+		if (put_user(ret, &uptr->nfetch32))
+			return -EFAULT;
+		}
+		return 0;
+
+	case MON_IOCG_STATS:
+		return mon_bin_ioctl(file, cmd, (unsigned long) compat_ptr(arg));
+
+	case MON_IOCQ_URB_LEN:
+	case MON_IOCQ_RING_SIZE:
+	case MON_IOCT_RING_SIZE:
+	case MON_IOCH_MFLUSH:
+		return mon_bin_ioctl(file, cmd, arg);
+
+	default:
+		;
+	}
+	return -ENOTTY;
+}
+#endif /* CONFIG_COMPAT */
+
+static __poll_t
+mon_bin_poll(struct file *file, struct poll_table_struct *wait)
+{
+	struct mon_reader_bin *rp = file->private_data;
+	__poll_t mask = 0;
+	unsigned long flags;
+
+	if (file->f_mode & FMODE_READ)
+		poll_wait(file, &rp->b_wait, wait);
+
+	spin_lock_irqsave(&rp->b_lock, flags);
+	if (!MON_RING_EMPTY(rp))
+		mask |= EPOLLIN | EPOLLRDNORM;    /* readable */
+	spin_unlock_irqrestore(&rp->b_lock, flags);
+	return mask;
+}
+
+/*
+ * open and close: just keep track of how many times the device is
+ * mapped, to use the proper memory allocation function.
+ */
+static void mon_bin_vma_open(struct vm_area_struct *vma)
+{
+	struct mon_reader_bin *rp = vma->vm_private_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rp->b_lock, flags);
+	rp->mmap_active++;
+	spin_unlock_irqrestore(&rp->b_lock, flags);
+}
+
+static void mon_bin_vma_close(struct vm_area_struct *vma)
+{
+	unsigned long flags;
+
+	struct mon_reader_bin *rp = vma->vm_private_data;
+	spin_lock_irqsave(&rp->b_lock, flags);
+	rp->mmap_active--;
+	spin_unlock_irqrestore(&rp->b_lock, flags);
+}
+
+/*
+ * Map ring pages to user space.
+ */
+static vm_fault_t mon_bin_vma_fault(struct vm_fault *vmf)
+{
+	struct mon_reader_bin *rp = vmf->vma->vm_private_data;
+	unsigned long offset, chunk_idx;
+	struct page *pageptr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rp->b_lock, flags);
+	offset = vmf->pgoff << PAGE_SHIFT;
+	if (offset >= rp->b_size) {
+		spin_unlock_irqrestore(&rp->b_lock, flags);
+		return VM_FAULT_SIGBUS;
+	}
+	chunk_idx = offset / CHUNK_SIZE;
+	pageptr = rp->b_vec[chunk_idx].pg;
+	get_page(pageptr);
+	vmf->page = pageptr;
+	spin_unlock_irqrestore(&rp->b_lock, flags);
+	return 0;
+}
+
+static const struct vm_operations_struct mon_bin_vm_ops = {
+	.open =     mon_bin_vma_open,
+	.close =    mon_bin_vma_close,
+	.fault =    mon_bin_vma_fault,
+};
+
+static int mon_bin_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	/* don't do anything here: "fault" will set up page table entries */
+	vma->vm_ops = &mon_bin_vm_ops;
+
+	if (vma->vm_flags & VM_WRITE)
+		return -EPERM;
+
+	vma->vm_flags &= ~VM_MAYWRITE;
+	vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP;
+	vma->vm_private_data = filp->private_data;
+	mon_bin_vma_open(vma);
+	return 0;
+}
+
+static const struct file_operations mon_fops_binary = {
+	.owner =	THIS_MODULE,
+	.open =		mon_bin_open,
+	.llseek =	no_llseek,
+	.read =		mon_bin_read,
+	/* .write =	mon_text_write, */
+	.poll =		mon_bin_poll,
+	.unlocked_ioctl = mon_bin_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl =	mon_bin_compat_ioctl,
+#endif
+	.release =	mon_bin_release,
+	.mmap =		mon_bin_mmap,
+};
+
+static int mon_bin_wait_event(struct file *file, struct mon_reader_bin *rp)
+{
+	DECLARE_WAITQUEUE(waita, current);
+	unsigned long flags;
+
+	add_wait_queue(&rp->b_wait, &waita);
+	set_current_state(TASK_INTERRUPTIBLE);
+
+	spin_lock_irqsave(&rp->b_lock, flags);
+	while (MON_RING_EMPTY(rp)) {
+		spin_unlock_irqrestore(&rp->b_lock, flags);
+
+		if (file->f_flags & O_NONBLOCK) {
+			set_current_state(TASK_RUNNING);
+			remove_wait_queue(&rp->b_wait, &waita);
+			return -EWOULDBLOCK; /* Same as EAGAIN in Linux */
+		}
+		schedule();
+		if (signal_pending(current)) {
+			remove_wait_queue(&rp->b_wait, &waita);
+			return -EINTR;
+		}
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		spin_lock_irqsave(&rp->b_lock, flags);
+	}
+	spin_unlock_irqrestore(&rp->b_lock, flags);
+
+	set_current_state(TASK_RUNNING);
+	remove_wait_queue(&rp->b_wait, &waita);
+	return 0;
+}
+
+static int mon_alloc_buff(struct mon_pgmap *map, int npages)
+{
+	int n;
+	unsigned long vaddr;
+
+	for (n = 0; n < npages; n++) {
+		vaddr = get_zeroed_page(GFP_KERNEL);
+		if (vaddr == 0) {
+			while (n-- != 0)
+				free_page((unsigned long) map[n].ptr);
+			return -ENOMEM;
+		}
+		map[n].ptr = (unsigned char *) vaddr;
+		map[n].pg = virt_to_page((void *) vaddr);
+	}
+	return 0;
+}
+
+static void mon_free_buff(struct mon_pgmap *map, int npages)
+{
+	int n;
+
+	for (n = 0; n < npages; n++)
+		free_page((unsigned long) map[n].ptr);
+}
+
+int mon_bin_add(struct mon_bus *mbus, const struct usb_bus *ubus)
+{
+	struct device *dev;
+	unsigned minor = ubus? ubus->busnum: 0;
+
+	if (minor >= MON_BIN_MAX_MINOR)
+		return 0;
+
+	dev = device_create(mon_bin_class, ubus ? ubus->controller : NULL,
+			    MKDEV(MAJOR(mon_bin_dev0), minor), NULL,
+			    "usbmon%d", minor);
+	if (IS_ERR(dev))
+		return 0;
+
+	mbus->classdev = dev;
+	return 1;
+}
+
+void mon_bin_del(struct mon_bus *mbus)
+{
+	device_destroy(mon_bin_class, mbus->classdev->devt);
+}
+
+int __init mon_bin_init(void)
+{
+	int rc;
+
+	mon_bin_class = class_create(THIS_MODULE, "usbmon");
+	if (IS_ERR(mon_bin_class)) {
+		rc = PTR_ERR(mon_bin_class);
+		goto err_class;
+	}
+
+	rc = alloc_chrdev_region(&mon_bin_dev0, 0, MON_BIN_MAX_MINOR, "usbmon");
+	if (rc < 0)
+		goto err_dev;
+
+	cdev_init(&mon_bin_cdev, &mon_fops_binary);
+	mon_bin_cdev.owner = THIS_MODULE;
+
+	rc = cdev_add(&mon_bin_cdev, mon_bin_dev0, MON_BIN_MAX_MINOR);
+	if (rc < 0)
+		goto err_add;
+
+	return 0;
+
+err_add:
+	unregister_chrdev_region(mon_bin_dev0, MON_BIN_MAX_MINOR);
+err_dev:
+	class_destroy(mon_bin_class);
+err_class:
+	return rc;
+}
+
+void mon_bin_exit(void)
+{
+	cdev_del(&mon_bin_cdev);
+	unregister_chrdev_region(mon_bin_dev0, MON_BIN_MAX_MINOR);
+	class_destroy(mon_bin_class);
+}
diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c
new file mode 100644
index 000000000..9812d102a
--- /dev/null
+++ b/drivers/usb/mon/mon_main.c
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The USB Monitor, inspired by Dave Harding's USBMon.
+ *
+ * mon_main.c: Main file, module initiation and exit, registrations, etc.
+ *
+ * Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/slab.h>
+#include <linux/notifier.h>
+#include <linux/mutex.h>
+
+#include "usb_mon.h"
+
+
+static void mon_stop(struct mon_bus *mbus);
+static void mon_dissolve(struct mon_bus *mbus, struct usb_bus *ubus);
+static void mon_bus_drop(struct kref *r);
+static void mon_bus_init(struct usb_bus *ubus);
+
+DEFINE_MUTEX(mon_lock);
+
+struct mon_bus mon_bus0;		/* Pseudo bus meaning "all buses" */
+static LIST_HEAD(mon_buses);		/* All buses we know: struct mon_bus */
+
+/*
+ * Link a reader into the bus.
+ *
+ * This must be called with mon_lock taken because of mbus->ref.
+ */
+void mon_reader_add(struct mon_bus *mbus, struct mon_reader *r)
+{
+	unsigned long flags;
+	struct list_head *p;
+
+	spin_lock_irqsave(&mbus->lock, flags);
+	if (mbus->nreaders == 0) {
+		if (mbus == &mon_bus0) {
+			list_for_each (p, &mon_buses) {
+				struct mon_bus *m1;
+				m1 = list_entry(p, struct mon_bus, bus_link);
+				m1->u_bus->monitored = 1;
+			}
+		} else {
+			mbus->u_bus->monitored = 1;
+		}
+	}
+	mbus->nreaders++;
+	list_add_tail(&r->r_link, &mbus->r_list);
+	spin_unlock_irqrestore(&mbus->lock, flags);
+
+	kref_get(&mbus->ref);
+}
+
+/*
+ * Unlink reader from the bus.
+ *
+ * This is called with mon_lock taken, so we can decrement mbus->ref.
+ */
+void mon_reader_del(struct mon_bus *mbus, struct mon_reader *r)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mbus->lock, flags);
+	list_del(&r->r_link);
+	--mbus->nreaders;
+	if (mbus->nreaders == 0)
+		mon_stop(mbus);
+	spin_unlock_irqrestore(&mbus->lock, flags);
+
+	kref_put(&mbus->ref, mon_bus_drop);
+}
+
+/*
+ */
+static void mon_bus_submit(struct mon_bus *mbus, struct urb *urb)
+{
+	unsigned long flags;
+	struct list_head *pos;
+	struct mon_reader *r;
+
+	spin_lock_irqsave(&mbus->lock, flags);
+	mbus->cnt_events++;
+	list_for_each (pos, &mbus->r_list) {
+		r = list_entry(pos, struct mon_reader, r_link);
+		r->rnf_submit(r->r_data, urb);
+	}
+	spin_unlock_irqrestore(&mbus->lock, flags);
+}
+
+static void mon_submit(struct usb_bus *ubus, struct urb *urb)
+{
+	struct mon_bus *mbus;
+
+	mbus = ubus->mon_bus;
+	if (mbus != NULL)
+		mon_bus_submit(mbus, urb);
+	mon_bus_submit(&mon_bus0, urb);
+}
+
+/*
+ */
+static void mon_bus_submit_error(struct mon_bus *mbus, struct urb *urb, int error)
+{
+	unsigned long flags;
+	struct list_head *pos;
+	struct mon_reader *r;
+
+	spin_lock_irqsave(&mbus->lock, flags);
+	mbus->cnt_events++;
+	list_for_each (pos, &mbus->r_list) {
+		r = list_entry(pos, struct mon_reader, r_link);
+		r->rnf_error(r->r_data, urb, error);
+	}
+	spin_unlock_irqrestore(&mbus->lock, flags);
+}
+
+static void mon_submit_error(struct usb_bus *ubus, struct urb *urb, int error)
+{
+	struct mon_bus *mbus;
+
+	mbus = ubus->mon_bus;
+	if (mbus != NULL)
+		mon_bus_submit_error(mbus, urb, error);
+	mon_bus_submit_error(&mon_bus0, urb, error);
+}
+
+/*
+ */
+static void mon_bus_complete(struct mon_bus *mbus, struct urb *urb, int status)
+{
+	unsigned long flags;
+	struct list_head *pos;
+	struct mon_reader *r;
+
+	spin_lock_irqsave(&mbus->lock, flags);
+	mbus->cnt_events++;
+	list_for_each (pos, &mbus->r_list) {
+		r = list_entry(pos, struct mon_reader, r_link);
+		r->rnf_complete(r->r_data, urb, status);
+	}
+	spin_unlock_irqrestore(&mbus->lock, flags);
+}
+
+static void mon_complete(struct usb_bus *ubus, struct urb *urb, int status)
+{
+	struct mon_bus *mbus;
+
+	mbus = ubus->mon_bus;
+	if (mbus != NULL)
+		mon_bus_complete(mbus, urb, status);
+	mon_bus_complete(&mon_bus0, urb, status);
+}
+
+/* int (*unlink_urb) (struct urb *urb, int status); */
+
+/*
+ * Stop monitoring.
+ */
+static void mon_stop(struct mon_bus *mbus)
+{
+	struct usb_bus *ubus;
+	struct list_head *p;
+
+	if (mbus == &mon_bus0) {
+		list_for_each (p, &mon_buses) {
+			mbus = list_entry(p, struct mon_bus, bus_link);
+			/*
+			 * We do not change nreaders here, so rely on mon_lock.
+			 */
+			if (mbus->nreaders == 0 && (ubus = mbus->u_bus) != NULL)
+				ubus->monitored = 0;
+		}
+	} else {
+		/*
+		 * A stop can be called for a dissolved mon_bus in case of
+		 * a reader staying across an rmmod foo_hcd, so test ->u_bus.
+		 */
+		if (mon_bus0.nreaders == 0 && (ubus = mbus->u_bus) != NULL) {
+			ubus->monitored = 0;
+			mb();
+		}
+	}
+}
+
+/*
+ * Add a USB bus (usually by a modprobe foo-hcd)
+ *
+ * This does not return an error code because the core cannot care less
+ * if monitoring is not established.
+ */
+static void mon_bus_add(struct usb_bus *ubus)
+{
+	mon_bus_init(ubus);
+	mutex_lock(&mon_lock);
+	if (mon_bus0.nreaders != 0)
+		ubus->monitored = 1;
+	mutex_unlock(&mon_lock);
+}
+
+/*
+ * Remove a USB bus (either from rmmod foo-hcd or from a hot-remove event).
+ */
+static void mon_bus_remove(struct usb_bus *ubus)
+{
+	struct mon_bus *mbus = ubus->mon_bus;
+
+	mutex_lock(&mon_lock);
+	list_del(&mbus->bus_link);
+	if (mbus->text_inited)
+		mon_text_del(mbus);
+	if (mbus->bin_inited)
+		mon_bin_del(mbus);
+
+	mon_dissolve(mbus, ubus);
+	kref_put(&mbus->ref, mon_bus_drop);
+	mutex_unlock(&mon_lock);
+}
+
+static int mon_notify(struct notifier_block *self, unsigned long action,
+		      void *dev)
+{
+	switch (action) {
+	case USB_BUS_ADD:
+		mon_bus_add(dev);
+		break;
+	case USB_BUS_REMOVE:
+		mon_bus_remove(dev);
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block mon_nb = {
+	.notifier_call = 	mon_notify,
+};
+
+/*
+ * Ops
+ */
+static const struct usb_mon_operations mon_ops_0 = {
+	.urb_submit =	mon_submit,
+	.urb_submit_error = mon_submit_error,
+	.urb_complete =	mon_complete,
+};
+
+/*
+ * Tear usb_bus and mon_bus apart.
+ */
+static void mon_dissolve(struct mon_bus *mbus, struct usb_bus *ubus)
+{
+
+	if (ubus->monitored) {
+		ubus->monitored = 0;
+		mb();
+	}
+
+	ubus->mon_bus = NULL;
+	mbus->u_bus = NULL;
+	mb();
+
+	/* We want synchronize_irq() here, but that needs an argument. */
+}
+
+/*
+ */
+static void mon_bus_drop(struct kref *r)
+{
+	struct mon_bus *mbus = container_of(r, struct mon_bus, ref);
+	kfree(mbus);
+}
+
+/*
+ * Initialize a bus for us:
+ *  - allocate mon_bus
+ *  - refcount USB bus struct
+ *  - link
+ */
+static void mon_bus_init(struct usb_bus *ubus)
+{
+	struct mon_bus *mbus;
+
+	mbus = kzalloc(sizeof(struct mon_bus), GFP_KERNEL);
+	if (mbus == NULL)
+		goto err_alloc;
+	kref_init(&mbus->ref);
+	spin_lock_init(&mbus->lock);
+	INIT_LIST_HEAD(&mbus->r_list);
+
+	/*
+	 * We don't need to take a reference to ubus, because we receive
+	 * a notification if the bus is about to be removed.
+	 */
+	mbus->u_bus = ubus;
+	ubus->mon_bus = mbus;
+
+	mbus->text_inited = mon_text_add(mbus, ubus);
+	mbus->bin_inited = mon_bin_add(mbus, ubus);
+
+	mutex_lock(&mon_lock);
+	list_add_tail(&mbus->bus_link, &mon_buses);
+	mutex_unlock(&mon_lock);
+	return;
+
+err_alloc:
+	return;
+}
+
+static void mon_bus0_init(void)
+{
+	struct mon_bus *mbus = &mon_bus0;
+
+	kref_init(&mbus->ref);
+	spin_lock_init(&mbus->lock);
+	INIT_LIST_HEAD(&mbus->r_list);
+
+	mbus->text_inited = mon_text_add(mbus, NULL);
+	mbus->bin_inited = mon_bin_add(mbus, NULL);
+}
+
+/*
+ * Search a USB bus by number. Notice that USB bus numbers start from one,
+ * which we may later use to identify "all" with zero.
+ *
+ * This function must be called with mon_lock held.
+ *
+ * This is obviously inefficient and may be revised in the future.
+ */
+struct mon_bus *mon_bus_lookup(unsigned int num)
+{
+	struct list_head *p;
+	struct mon_bus *mbus;
+
+	if (num == 0) {
+		return &mon_bus0;
+	}
+	list_for_each (p, &mon_buses) {
+		mbus = list_entry(p, struct mon_bus, bus_link);
+		if (mbus->u_bus->busnum == num) {
+			return mbus;
+		}
+	}
+	return NULL;
+}
+
+static int __init mon_init(void)
+{
+	struct usb_bus *ubus;
+	int rc, id;
+
+	if ((rc = mon_text_init()) != 0)
+		goto err_text;
+	if ((rc = mon_bin_init()) != 0)
+		goto err_bin;
+
+	mon_bus0_init();
+
+	if (usb_mon_register(&mon_ops_0) != 0) {
+		printk(KERN_NOTICE TAG ": unable to register with the core\n");
+		rc = -ENODEV;
+		goto err_reg;
+	}
+	// MOD_INC_USE_COUNT(which_module?);
+
+	mutex_lock(&usb_bus_idr_lock);
+	idr_for_each_entry(&usb_bus_idr, ubus, id)
+		mon_bus_init(ubus);
+	usb_register_notify(&mon_nb);
+	mutex_unlock(&usb_bus_idr_lock);
+	return 0;
+
+err_reg:
+	mon_bin_exit();
+err_bin:
+	mon_text_exit();
+err_text:
+	return rc;
+}
+
+static void __exit mon_exit(void)
+{
+	struct mon_bus *mbus;
+	struct list_head *p;
+
+	usb_unregister_notify(&mon_nb);
+	usb_mon_deregister();
+
+	mutex_lock(&mon_lock);
+
+	while (!list_empty(&mon_buses)) {
+		p = mon_buses.next;
+		mbus = list_entry(p, struct mon_bus, bus_link);
+		list_del(p);
+
+		if (mbus->text_inited)
+			mon_text_del(mbus);
+		if (mbus->bin_inited)
+			mon_bin_del(mbus);
+
+		/*
+		 * This never happens, because the open/close paths in
+		 * file level maintain module use counters and so rmmod fails
+		 * before reaching here. However, better be safe...
+		 */
+		if (mbus->nreaders) {
+			printk(KERN_ERR TAG
+			    ": Outstanding opens (%d) on usb%d, leaking...\n",
+			    mbus->nreaders, mbus->u_bus->busnum);
+			kref_get(&mbus->ref); /* Force leak */
+		}
+
+		mon_dissolve(mbus, mbus->u_bus);
+		kref_put(&mbus->ref, mon_bus_drop);
+	}
+
+	mbus = &mon_bus0;
+	if (mbus->text_inited)
+		mon_text_del(mbus);
+	if (mbus->bin_inited)
+		mon_bin_del(mbus);
+
+	mutex_unlock(&mon_lock);
+
+	mon_text_exit();
+	mon_bin_exit();
+}
+
+module_init(mon_init);
+module_exit(mon_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/mon/mon_stat.c b/drivers/usb/mon/mon_stat.c
new file mode 100644
index 000000000..98ab0cc47
--- /dev/null
+++ b/drivers/usb/mon/mon_stat.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The USB Monitor, inspired by Dave Harding's USBMon.
+ *
+ * This is the 's' or 'stat' reader which debugs usbmon itself.
+ * Note that this code blows through locks, so make sure that
+ * /dbg/usbmon/0s is well protected from non-root users.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/usb.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+
+#include "usb_mon.h"
+
+#define STAT_BUF_SIZE  80
+
+struct snap {
+	int slen;
+	char str[STAT_BUF_SIZE];
+};
+
+static int mon_stat_open(struct inode *inode, struct file *file)
+{
+	struct mon_bus *mbus;
+	struct snap *sp;
+
+	sp = kmalloc(sizeof(struct snap), GFP_KERNEL);
+	if (sp == NULL)
+		return -ENOMEM;
+
+	mbus = inode->i_private;
+
+	sp->slen = snprintf(sp->str, STAT_BUF_SIZE,
+	    "nreaders %d events %u text_lost %u\n",
+	    mbus->nreaders, mbus->cnt_events, mbus->cnt_text_lost);
+
+	file->private_data = sp;
+	return 0;
+}
+
+static ssize_t mon_stat_read(struct file *file, char __user *buf,
+				size_t nbytes, loff_t *ppos)
+{
+	struct snap *sp = file->private_data;
+
+	return simple_read_from_buffer(buf, nbytes, ppos, sp->str, sp->slen);
+}
+
+static int mon_stat_release(struct inode *inode, struct file *file)
+{
+	struct snap *sp = file->private_data;
+	file->private_data = NULL;
+	kfree(sp);
+	return 0;
+}
+
+const struct file_operations mon_fops_stat = {
+	.owner =	THIS_MODULE,
+	.open =		mon_stat_open,
+	.llseek =	no_llseek,
+	.read =		mon_stat_read,
+	/* .write =	mon_stat_write, */
+	/* .poll =		mon_stat_poll, */
+	/* .unlocked_ioctl =	mon_stat_ioctl, */
+	.release =	mon_stat_release,
+};
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
new file mode 100644
index 000000000..39cb14164
--- /dev/null
+++ b/drivers/usb/mon/mon_text.c
@@ -0,0 +1,773 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The USB Monitor, inspired by Dave Harding's USBMon.
+ *
+ * This is a text format reader.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/sched/signal.h>
+#include <linux/time.h>
+#include <linux/ktime.h>
+#include <linux/export.h>
+#include <linux/mutex.h>
+#include <linux/debugfs.h>
+#include <linux/scatterlist.h>
+#include <linux/uaccess.h>
+
+#include "usb_mon.h"
+
+/*
+ * No, we do not want arbitrarily long data strings.
+ * Use the binary interface if you want to capture bulk data!
+ */
+#define DATA_MAX  32
+
+/*
+ * Defined by USB 2.0 clause 9.3, table 9.2.
+ */
+#define SETUP_MAX  8
+
+/*
+ * This limit exists to prevent OOMs when the user process stops reading.
+ * If usbmon were available to unprivileged processes, it might be open
+ * to a local DoS. But we have to keep to root in order to prevent
+ * password sniffing from HID devices.
+ */
+#define EVENT_MAX  (4*PAGE_SIZE / sizeof(struct mon_event_text))
+
+/*
+ * Potentially unlimited number; we limit it for similar allocations.
+ * The usbfs limits this to 128, but we're not quite as generous.
+ */
+#define ISODESC_MAX   5
+
+#define PRINTF_DFL  250   /* with 5 ISOs segs */
+
+struct mon_iso_desc {
+	int status;
+	unsigned int offset;
+	unsigned int length;	/* Unsigned here, signed in URB. Historic. */
+};
+
+struct mon_event_text {
+	struct list_head e_link;
+	int type;		/* submit, complete, etc. */
+	unsigned long id;	/* From pointer, most of the time */
+	unsigned int tstamp;
+	int busnum;
+	char devnum;
+	char epnum;
+	char is_in;
+	char xfertype;
+	int length;		/* Depends on type: xfer length or act length */
+	int status;
+	int interval;
+	int start_frame;
+	int error_count;
+	char setup_flag;
+	char data_flag;
+	int numdesc;		/* Full number */
+	struct mon_iso_desc isodesc[ISODESC_MAX];
+	unsigned char setup[SETUP_MAX];
+	unsigned char data[DATA_MAX];
+};
+
+#define SLAB_NAME_SZ  30
+struct mon_reader_text {
+	struct kmem_cache *e_slab;
+	int nevents;
+	struct list_head e_list;
+	struct mon_reader r;	/* In C, parent class can be placed anywhere */
+
+	wait_queue_head_t wait;
+	int printf_size;
+	size_t printf_offset;
+	size_t printf_togo;
+	char *printf_buf;
+	struct mutex printf_lock;
+
+	char slab_name[SLAB_NAME_SZ];
+};
+
+static struct dentry *mon_dir;		/* Usually /sys/kernel/debug/usbmon */
+
+static void mon_text_ctor(void *);
+
+struct mon_text_ptr {
+	int cnt, limit;
+	char *pbuf;
+};
+
+static struct mon_event_text *
+    mon_text_read_wait(struct mon_reader_text *rp, struct file *file);
+static void mon_text_read_head_t(struct mon_reader_text *rp,
+	struct mon_text_ptr *p, const struct mon_event_text *ep);
+static void mon_text_read_head_u(struct mon_reader_text *rp,
+	struct mon_text_ptr *p, const struct mon_event_text *ep);
+static void mon_text_read_statset(struct mon_reader_text *rp,
+	struct mon_text_ptr *p, const struct mon_event_text *ep);
+static void mon_text_read_intstat(struct mon_reader_text *rp,
+	struct mon_text_ptr *p, const struct mon_event_text *ep);
+static void mon_text_read_isostat(struct mon_reader_text *rp,
+	struct mon_text_ptr *p, const struct mon_event_text *ep);
+static void mon_text_read_isodesc(struct mon_reader_text *rp,
+	struct mon_text_ptr *p, const struct mon_event_text *ep);
+static void mon_text_read_data(struct mon_reader_text *rp,
+    struct mon_text_ptr *p, const struct mon_event_text *ep);
+
+/*
+ * mon_text_submit
+ * mon_text_complete
+ *
+ * May be called from an interrupt.
+ *
+ * This is called with the whole mon_bus locked, so no additional lock.
+ */
+
+static inline char mon_text_get_setup(struct mon_event_text *ep,
+    struct urb *urb, char ev_type, struct mon_bus *mbus)
+{
+
+	if (ep->xfertype != USB_ENDPOINT_XFER_CONTROL || ev_type != 'S')
+		return '-';
+
+	if (urb->setup_packet == NULL)
+		return 'Z';	/* '0' would be not as pretty. */
+
+	memcpy(ep->setup, urb->setup_packet, SETUP_MAX);
+	return 0;
+}
+
+static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb,
+    int len, char ev_type, struct mon_bus *mbus)
+{
+	void *src;
+
+	if (len <= 0)
+		return 'L';
+	if (len >= DATA_MAX)
+		len = DATA_MAX;
+
+	if (ep->is_in) {
+		if (ev_type != 'C')
+			return '<';
+	} else {
+		if (ev_type != 'S')
+			return '>';
+	}
+
+	if (urb->num_sgs == 0) {
+		src = urb->transfer_buffer;
+		if (src == NULL)
+			return 'Z';	/* '0' would be not as pretty. */
+	} else {
+		struct scatterlist *sg = urb->sg;
+
+		if (PageHighMem(sg_page(sg)))
+			return 'D';
+
+		/* For the text interface we copy only the first sg buffer */
+		len = min_t(int, sg->length, len);
+		src = sg_virt(sg);
+	}
+
+	memcpy(ep->data, src, len);
+	return 0;
+}
+
+static inline unsigned int mon_get_timestamp(void)
+{
+	struct timespec64 now;
+	unsigned int stamp;
+
+	ktime_get_ts64(&now);
+	stamp = now.tv_sec & 0xFFF;  /* 2^32 = 4294967296. Limit to 4096s. */
+	stamp = stamp * USEC_PER_SEC + now.tv_nsec / NSEC_PER_USEC;
+	return stamp;
+}
+
+static void mon_text_event(struct mon_reader_text *rp, struct urb *urb,
+    char ev_type, int status)
+{
+	struct mon_event_text *ep;
+	unsigned int stamp;
+	struct usb_iso_packet_descriptor *fp;
+	struct mon_iso_desc *dp;
+	int i, ndesc;
+
+	stamp = mon_get_timestamp();
+
+	if (rp->nevents >= EVENT_MAX ||
+	    (ep = kmem_cache_alloc(rp->e_slab, GFP_ATOMIC)) == NULL) {
+		rp->r.m_bus->cnt_text_lost++;
+		return;
+	}
+
+	ep->type = ev_type;
+	ep->id = (unsigned long) urb;
+	ep->busnum = urb->dev->bus->busnum;
+	ep->devnum = urb->dev->devnum;
+	ep->epnum = usb_endpoint_num(&urb->ep->desc);
+	ep->xfertype = usb_endpoint_type(&urb->ep->desc);
+	ep->is_in = usb_urb_dir_in(urb);
+	ep->tstamp = stamp;
+	ep->length = (ev_type == 'S') ?
+	    urb->transfer_buffer_length : urb->actual_length;
+	/* Collecting status makes debugging sense for submits, too */
+	ep->status = status;
+
+	if (ep->xfertype == USB_ENDPOINT_XFER_INT) {
+		ep->interval = urb->interval;
+	} else if (ep->xfertype == USB_ENDPOINT_XFER_ISOC) {
+		ep->interval = urb->interval;
+		ep->start_frame = urb->start_frame;
+		ep->error_count = urb->error_count;
+	}
+	ep->numdesc = urb->number_of_packets;
+	if (ep->xfertype == USB_ENDPOINT_XFER_ISOC &&
+			urb->number_of_packets > 0) {
+		if ((ndesc = urb->number_of_packets) > ISODESC_MAX)
+			ndesc = ISODESC_MAX;
+		fp = urb->iso_frame_desc;
+		dp = ep->isodesc;
+		for (i = 0; i < ndesc; i++) {
+			dp->status = fp->status;
+			dp->offset = fp->offset;
+			dp->length = (ev_type == 'S') ?
+			    fp->length : fp->actual_length;
+			fp++;
+			dp++;
+		}
+		/* Wasteful, but simple to understand: ISO 'C' is sparse. */
+		if (ev_type == 'C')
+			ep->length = urb->transfer_buffer_length;
+	}
+
+	ep->setup_flag = mon_text_get_setup(ep, urb, ev_type, rp->r.m_bus);
+	ep->data_flag = mon_text_get_data(ep, urb, ep->length, ev_type,
+			rp->r.m_bus);
+
+	rp->nevents++;
+	list_add_tail(&ep->e_link, &rp->e_list);
+	wake_up(&rp->wait);
+}
+
+static void mon_text_submit(void *data, struct urb *urb)
+{
+	struct mon_reader_text *rp = data;
+	mon_text_event(rp, urb, 'S', -EINPROGRESS);
+}
+
+static void mon_text_complete(void *data, struct urb *urb, int status)
+{
+	struct mon_reader_text *rp = data;
+	mon_text_event(rp, urb, 'C', status);
+}
+
+static void mon_text_error(void *data, struct urb *urb, int error)
+{
+	struct mon_reader_text *rp = data;
+	struct mon_event_text *ep;
+
+	if (rp->nevents >= EVENT_MAX ||
+	    (ep = kmem_cache_alloc(rp->e_slab, GFP_ATOMIC)) == NULL) {
+		rp->r.m_bus->cnt_text_lost++;
+		return;
+	}
+
+	ep->type = 'E';
+	ep->id = (unsigned long) urb;
+	ep->busnum = urb->dev->bus->busnum;
+	ep->devnum = urb->dev->devnum;
+	ep->epnum = usb_endpoint_num(&urb->ep->desc);
+	ep->xfertype = usb_endpoint_type(&urb->ep->desc);
+	ep->is_in = usb_urb_dir_in(urb);
+	ep->tstamp = mon_get_timestamp();
+	ep->length = 0;
+	ep->status = error;
+
+	ep->setup_flag = '-';
+	ep->data_flag = 'E';
+
+	rp->nevents++;
+	list_add_tail(&ep->e_link, &rp->e_list);
+	wake_up(&rp->wait);
+}
+
+/*
+ * Fetch next event from the circular buffer.
+ */
+static struct mon_event_text *mon_text_fetch(struct mon_reader_text *rp,
+    struct mon_bus *mbus)
+{
+	struct list_head *p;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mbus->lock, flags);
+	if (list_empty(&rp->e_list)) {
+		spin_unlock_irqrestore(&mbus->lock, flags);
+		return NULL;
+	}
+	p = rp->e_list.next;
+	list_del(p);
+	--rp->nevents;
+	spin_unlock_irqrestore(&mbus->lock, flags);
+	return list_entry(p, struct mon_event_text, e_link);
+}
+
+/*
+ */
+static int mon_text_open(struct inode *inode, struct file *file)
+{
+	struct mon_bus *mbus;
+	struct mon_reader_text *rp;
+	int rc;
+
+	mutex_lock(&mon_lock);
+	mbus = inode->i_private;
+
+	rp = kzalloc(sizeof(struct mon_reader_text), GFP_KERNEL);
+	if (rp == NULL) {
+		rc = -ENOMEM;
+		goto err_alloc;
+	}
+	INIT_LIST_HEAD(&rp->e_list);
+	init_waitqueue_head(&rp->wait);
+	mutex_init(&rp->printf_lock);
+
+	rp->printf_size = PRINTF_DFL;
+	rp->printf_buf = kmalloc(rp->printf_size, GFP_KERNEL);
+	if (rp->printf_buf == NULL) {
+		rc = -ENOMEM;
+		goto err_alloc_pr;
+	}
+
+	rp->r.m_bus = mbus;
+	rp->r.r_data = rp;
+	rp->r.rnf_submit = mon_text_submit;
+	rp->r.rnf_error = mon_text_error;
+	rp->r.rnf_complete = mon_text_complete;
+
+	snprintf(rp->slab_name, SLAB_NAME_SZ, "mon_text_%p", rp);
+	rp->e_slab = kmem_cache_create(rp->slab_name,
+	    sizeof(struct mon_event_text), sizeof(long), 0,
+	    mon_text_ctor);
+	if (rp->e_slab == NULL) {
+		rc = -ENOMEM;
+		goto err_slab;
+	}
+
+	mon_reader_add(mbus, &rp->r);
+
+	file->private_data = rp;
+	mutex_unlock(&mon_lock);
+	return 0;
+
+// err_busy:
+//	kmem_cache_destroy(rp->e_slab);
+err_slab:
+	kfree(rp->printf_buf);
+err_alloc_pr:
+	kfree(rp);
+err_alloc:
+	mutex_unlock(&mon_lock);
+	return rc;
+}
+
+static ssize_t mon_text_copy_to_user(struct mon_reader_text *rp,
+    char __user * const buf, const size_t nbytes)
+{
+	const size_t togo = min(nbytes, rp->printf_togo);
+
+	if (copy_to_user(buf, &rp->printf_buf[rp->printf_offset], togo))
+		return -EFAULT;
+	rp->printf_togo -= togo;
+	rp->printf_offset += togo;
+	return togo;
+}
+
+/* ppos is not advanced since the llseek operation is not permitted. */
+static ssize_t mon_text_read_t(struct file *file, char __user *buf,
+    size_t nbytes, loff_t *ppos)
+{
+	struct mon_reader_text *rp = file->private_data;
+	struct mon_event_text *ep;
+	struct mon_text_ptr ptr;
+	ssize_t ret;
+
+	mutex_lock(&rp->printf_lock);
+
+	if (rp->printf_togo == 0) {
+
+		ep = mon_text_read_wait(rp, file);
+		if (IS_ERR(ep)) {
+			mutex_unlock(&rp->printf_lock);
+			return PTR_ERR(ep);
+		}
+		ptr.cnt = 0;
+		ptr.pbuf = rp->printf_buf;
+		ptr.limit = rp->printf_size;
+
+		mon_text_read_head_t(rp, &ptr, ep);
+		mon_text_read_statset(rp, &ptr, ep);
+		ptr.cnt += scnprintf(ptr.pbuf + ptr.cnt, ptr.limit - ptr.cnt,
+		    " %d", ep->length);
+		mon_text_read_data(rp, &ptr, ep);
+
+		rp->printf_togo = ptr.cnt;
+		rp->printf_offset = 0;
+
+		kmem_cache_free(rp->e_slab, ep);
+	}
+
+	ret = mon_text_copy_to_user(rp, buf, nbytes);
+	mutex_unlock(&rp->printf_lock);
+	return ret;
+}
+
+/* ppos is not advanced since the llseek operation is not permitted. */
+static ssize_t mon_text_read_u(struct file *file, char __user *buf,
+    size_t nbytes, loff_t *ppos)
+{
+	struct mon_reader_text *rp = file->private_data;
+	struct mon_event_text *ep;
+	struct mon_text_ptr ptr;
+	ssize_t ret;
+
+	mutex_lock(&rp->printf_lock);
+
+	if (rp->printf_togo == 0) {
+
+		ep = mon_text_read_wait(rp, file);
+		if (IS_ERR(ep)) {
+			mutex_unlock(&rp->printf_lock);
+			return PTR_ERR(ep);
+		}
+		ptr.cnt = 0;
+		ptr.pbuf = rp->printf_buf;
+		ptr.limit = rp->printf_size;
+
+		mon_text_read_head_u(rp, &ptr, ep);
+		if (ep->type == 'E') {
+			mon_text_read_statset(rp, &ptr, ep);
+		} else if (ep->xfertype == USB_ENDPOINT_XFER_ISOC) {
+			mon_text_read_isostat(rp, &ptr, ep);
+			mon_text_read_isodesc(rp, &ptr, ep);
+		} else if (ep->xfertype == USB_ENDPOINT_XFER_INT) {
+			mon_text_read_intstat(rp, &ptr, ep);
+		} else {
+			mon_text_read_statset(rp, &ptr, ep);
+		}
+		ptr.cnt += scnprintf(ptr.pbuf + ptr.cnt, ptr.limit - ptr.cnt,
+		    " %d", ep->length);
+		mon_text_read_data(rp, &ptr, ep);
+
+		rp->printf_togo = ptr.cnt;
+		rp->printf_offset = 0;
+
+		kmem_cache_free(rp->e_slab, ep);
+	}
+
+	ret = mon_text_copy_to_user(rp, buf, nbytes);
+	mutex_unlock(&rp->printf_lock);
+	return ret;
+}
+
+static struct mon_event_text *mon_text_read_wait(struct mon_reader_text *rp,
+    struct file *file)
+{
+	struct mon_bus *mbus = rp->r.m_bus;
+	DECLARE_WAITQUEUE(waita, current);
+	struct mon_event_text *ep;
+
+	add_wait_queue(&rp->wait, &waita);
+	set_current_state(TASK_INTERRUPTIBLE);
+	while ((ep = mon_text_fetch(rp, mbus)) == NULL) {
+		if (file->f_flags & O_NONBLOCK) {
+			set_current_state(TASK_RUNNING);
+			remove_wait_queue(&rp->wait, &waita);
+			return ERR_PTR(-EWOULDBLOCK);
+		}
+		/*
+		 * We do not count nwaiters, because ->release is supposed
+		 * to be called when all openers are gone only.
+		 */
+		schedule();
+		if (signal_pending(current)) {
+			remove_wait_queue(&rp->wait, &waita);
+			return ERR_PTR(-EINTR);
+		}
+		set_current_state(TASK_INTERRUPTIBLE);
+	}
+	set_current_state(TASK_RUNNING);
+	remove_wait_queue(&rp->wait, &waita);
+	return ep;
+}
+
+static void mon_text_read_head_t(struct mon_reader_text *rp,
+	struct mon_text_ptr *p, const struct mon_event_text *ep)
+{
+	char udir, utype;
+
+	udir = (ep->is_in ? 'i' : 'o');
+	switch (ep->xfertype) {
+	case USB_ENDPOINT_XFER_ISOC:	utype = 'Z'; break;
+	case USB_ENDPOINT_XFER_INT:	utype = 'I'; break;
+	case USB_ENDPOINT_XFER_CONTROL:	utype = 'C'; break;
+	default: /* PIPE_BULK */  utype = 'B';
+	}
+	p->cnt += scnprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+	    "%lx %u %c %c%c:%03u:%02u",
+	    ep->id, ep->tstamp, ep->type,
+	    utype, udir, ep->devnum, ep->epnum);
+}
+
+static void mon_text_read_head_u(struct mon_reader_text *rp,
+	struct mon_text_ptr *p, const struct mon_event_text *ep)
+{
+	char udir, utype;
+
+	udir = (ep->is_in ? 'i' : 'o');
+	switch (ep->xfertype) {
+	case USB_ENDPOINT_XFER_ISOC:	utype = 'Z'; break;
+	case USB_ENDPOINT_XFER_INT:	utype = 'I'; break;
+	case USB_ENDPOINT_XFER_CONTROL:	utype = 'C'; break;
+	default: /* PIPE_BULK */  utype = 'B';
+	}
+	p->cnt += scnprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+	    "%lx %u %c %c%c:%d:%03u:%u",
+	    ep->id, ep->tstamp, ep->type,
+	    utype, udir, ep->busnum, ep->devnum, ep->epnum);
+}
+
+static void mon_text_read_statset(struct mon_reader_text *rp,
+	struct mon_text_ptr *p, const struct mon_event_text *ep)
+{
+
+	if (ep->setup_flag == 0) {   /* Setup packet is present and captured */
+		p->cnt += scnprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+		    " s %02x %02x %04x %04x %04x",
+		    ep->setup[0],
+		    ep->setup[1],
+		    (ep->setup[3] << 8) | ep->setup[2],
+		    (ep->setup[5] << 8) | ep->setup[4],
+		    (ep->setup[7] << 8) | ep->setup[6]);
+	} else if (ep->setup_flag != '-') { /* Unable to capture setup packet */
+		p->cnt += scnprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+		    " %c __ __ ____ ____ ____", ep->setup_flag);
+	} else {                     /* No setup for this kind of URB */
+		p->cnt += scnprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+		    " %d", ep->status);
+	}
+}
+
+static void mon_text_read_intstat(struct mon_reader_text *rp,
+	struct mon_text_ptr *p, const struct mon_event_text *ep)
+{
+	p->cnt += scnprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+	    " %d:%d", ep->status, ep->interval);
+}
+
+static void mon_text_read_isostat(struct mon_reader_text *rp,
+	struct mon_text_ptr *p, const struct mon_event_text *ep)
+{
+	if (ep->type == 'S') {
+		p->cnt += scnprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+		    " %d:%d:%d", ep->status, ep->interval, ep->start_frame);
+	} else {
+		p->cnt += scnprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+		    " %d:%d:%d:%d",
+		    ep->status, ep->interval, ep->start_frame, ep->error_count);
+	}
+}
+
+static void mon_text_read_isodesc(struct mon_reader_text *rp,
+	struct mon_text_ptr *p, const struct mon_event_text *ep)
+{
+	int ndesc;	/* Display this many */
+	int i;
+	const struct mon_iso_desc *dp;
+
+	p->cnt += scnprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+	    " %d", ep->numdesc);
+	ndesc = ep->numdesc;
+	if (ndesc > ISODESC_MAX)
+		ndesc = ISODESC_MAX;
+	if (ndesc < 0)
+		ndesc = 0;
+	dp = ep->isodesc;
+	for (i = 0; i < ndesc; i++) {
+		p->cnt += scnprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+		    " %d:%u:%u", dp->status, dp->offset, dp->length);
+		dp++;
+	}
+}
+
+static void mon_text_read_data(struct mon_reader_text *rp,
+    struct mon_text_ptr *p, const struct mon_event_text *ep)
+{
+	int data_len, i;
+
+	if ((data_len = ep->length) > 0) {
+		if (ep->data_flag == 0) {
+			p->cnt += scnprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+			    " =");
+			if (data_len >= DATA_MAX)
+				data_len = DATA_MAX;
+			for (i = 0; i < data_len; i++) {
+				if (i % 4 == 0) {
+					p->cnt += scnprintf(p->pbuf + p->cnt,
+					    p->limit - p->cnt,
+					    " ");
+				}
+				p->cnt += scnprintf(p->pbuf + p->cnt,
+				    p->limit - p->cnt,
+				    "%02x", ep->data[i]);
+			}
+			p->cnt += scnprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+			    "\n");
+		} else {
+			p->cnt += scnprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+			    " %c\n", ep->data_flag);
+		}
+	} else {
+		p->cnt += scnprintf(p->pbuf + p->cnt, p->limit - p->cnt, "\n");
+	}
+}
+
+static int mon_text_release(struct inode *inode, struct file *file)
+{
+	struct mon_reader_text *rp = file->private_data;
+	struct mon_bus *mbus;
+	/* unsigned long flags; */
+	struct list_head *p;
+	struct mon_event_text *ep;
+
+	mutex_lock(&mon_lock);
+	mbus = inode->i_private;
+
+	if (mbus->nreaders <= 0) {
+		printk(KERN_ERR TAG ": consistency error on close\n");
+		mutex_unlock(&mon_lock);
+		return 0;
+	}
+	mon_reader_del(mbus, &rp->r);
+
+	/*
+	 * In theory, e_list is protected by mbus->lock. However,
+	 * after mon_reader_del has finished, the following is the case:
+	 *  - we are not on reader list anymore, so new events won't be added;
+	 *  - whole mbus may be dropped if it was orphaned.
+	 * So, we better not touch mbus.
+	 */
+	/* spin_lock_irqsave(&mbus->lock, flags); */
+	while (!list_empty(&rp->e_list)) {
+		p = rp->e_list.next;
+		ep = list_entry(p, struct mon_event_text, e_link);
+		list_del(p);
+		--rp->nevents;
+		kmem_cache_free(rp->e_slab, ep);
+	}
+	/* spin_unlock_irqrestore(&mbus->lock, flags); */
+
+	kmem_cache_destroy(rp->e_slab);
+	kfree(rp->printf_buf);
+	kfree(rp);
+
+	mutex_unlock(&mon_lock);
+	return 0;
+}
+
+static const struct file_operations mon_fops_text_t = {
+	.owner =	THIS_MODULE,
+	.open =		mon_text_open,
+	.llseek =	no_llseek,
+	.read =		mon_text_read_t,
+	.release =	mon_text_release,
+};
+
+static const struct file_operations mon_fops_text_u = {
+	.owner =	THIS_MODULE,
+	.open =		mon_text_open,
+	.llseek =	no_llseek,
+	.read =		mon_text_read_u,
+	.release =	mon_text_release,
+};
+
+int mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus)
+{
+	enum { NAMESZ = 10 };
+	char name[NAMESZ];
+	int busnum = ubus? ubus->busnum: 0;
+	int rc;
+
+	if (mon_dir == NULL)
+		return 0;
+
+	if (ubus != NULL) {
+		rc = snprintf(name, NAMESZ, "%dt", busnum);
+		if (rc <= 0 || rc >= NAMESZ)
+			goto err_print_t;
+		mbus->dent_t = debugfs_create_file(name, 0600, mon_dir, mbus,
+							     &mon_fops_text_t);
+	}
+
+	rc = snprintf(name, NAMESZ, "%du", busnum);
+	if (rc <= 0 || rc >= NAMESZ)
+		goto err_print_u;
+	mbus->dent_u = debugfs_create_file(name, 0600, mon_dir, mbus,
+					   &mon_fops_text_u);
+
+	rc = snprintf(name, NAMESZ, "%ds", busnum);
+	if (rc <= 0 || rc >= NAMESZ)
+		goto err_print_s;
+	mbus->dent_s = debugfs_create_file(name, 0600, mon_dir, mbus,
+					   &mon_fops_stat);
+
+	return 1;
+
+err_print_s:
+	debugfs_remove(mbus->dent_u);
+	mbus->dent_u = NULL;
+err_print_u:
+	if (ubus != NULL) {
+		debugfs_remove(mbus->dent_t);
+		mbus->dent_t = NULL;
+	}
+err_print_t:
+	return 0;
+}
+
+void mon_text_del(struct mon_bus *mbus)
+{
+	debugfs_remove(mbus->dent_u);
+	debugfs_remove(mbus->dent_t);
+	debugfs_remove(mbus->dent_s);
+}
+
+/*
+ * Slab interface: constructor.
+ */
+static void mon_text_ctor(void *mem)
+{
+	/*
+	 * Nothing to initialize. No, really!
+	 * So, we fill it with garbage to emulate a reused object.
+	 */
+	memset(mem, 0xe5, sizeof(struct mon_event_text));
+}
+
+int __init mon_text_init(void)
+{
+	mon_dir = debugfs_create_dir("usbmon", usb_debug_root);
+	return 0;
+}
+
+void mon_text_exit(void)
+{
+	debugfs_remove(mon_dir);
+}
diff --git a/drivers/usb/mon/usb_mon.h b/drivers/usb/mon/usb_mon.h
new file mode 100644
index 000000000..aa64efaba
--- /dev/null
+++ b/drivers/usb/mon/usb_mon.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * The USB Monitor, inspired by Dave Harding's USBMon.
+ *
+ * Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com)
+ */
+
+#ifndef __USB_MON_H
+#define __USB_MON_H
+
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/kref.h>
+/* #include <linux/usb.h> */	/* We use struct pointers only in this header */
+
+#define TAG "usbmon"
+
+struct mon_bus {
+	struct list_head bus_link;
+	spinlock_t lock;
+	struct usb_bus *u_bus;
+
+	int text_inited;
+	int bin_inited;
+	struct dentry *dent_s;		/* Debugging file */
+	struct dentry *dent_t;		/* Text interface file */
+	struct dentry *dent_u;		/* Second text interface file */
+	struct device *classdev;	/* Device in usbmon class */
+
+	/* Ref */
+	int nreaders;			/* Under mon_lock AND mbus->lock */
+	struct list_head r_list;	/* Chain of readers (usually one) */
+	struct kref ref;		/* Under mon_lock */
+
+	/* Stats */
+	unsigned int cnt_events;
+	unsigned int cnt_text_lost;
+};
+
+/*
+ * An instance of a process which opened a file (but can fork later)
+ */
+struct mon_reader {
+	struct list_head r_link;
+	struct mon_bus *m_bus;
+	void *r_data;		/* Use container_of instead? */
+
+	void (*rnf_submit)(void *data, struct urb *urb);
+	void (*rnf_error)(void *data, struct urb *urb, int error);
+	void (*rnf_complete)(void *data, struct urb *urb, int status);
+};
+
+void mon_reader_add(struct mon_bus *mbus, struct mon_reader *r);
+void mon_reader_del(struct mon_bus *mbus, struct mon_reader *r);
+
+struct mon_bus *mon_bus_lookup(unsigned int num);
+
+int /*bool*/ mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus);
+void mon_text_del(struct mon_bus *mbus);
+int /*bool*/ mon_bin_add(struct mon_bus *mbus, const struct usb_bus *ubus);
+void mon_bin_del(struct mon_bus *mbus);
+
+int __init mon_text_init(void);
+void mon_text_exit(void);
+int __init mon_bin_init(void);
+void mon_bin_exit(void);
+
+/*
+ */
+extern struct mutex mon_lock;
+
+extern const struct file_operations mon_fops_stat;
+
+extern struct mon_bus mon_bus0;		/* Only for redundant checks */
+
+#endif /* __USB_MON_H */
diff --git a/drivers/usb/mtu3/Kconfig b/drivers/usb/mtu3/Kconfig
new file mode 100644
index 000000000..bf98fd363
--- /dev/null
+++ b/drivers/usb/mtu3/Kconfig
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# For MTK USB3.0 IP
+
+config USB_MTU3
+	tristate "MediaTek USB3 Dual Role controller"
+	depends on USB || USB_GADGET
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on EXTCON || !EXTCON
+	select USB_XHCI_MTK if USB_SUPPORT && USB_XHCI_HCD
+	help
+	  Say Y or M here if your system runs on MediaTek SoCs with
+	  Dual Role SuperSpeed USB controller. You can select usb
+	  mode as peripheral role or host role, or both.
+
+	  If you don't know what this is, please say N.
+
+	  Choose M here to compile this driver as a module, and it
+	  will be called mtu3.ko.
+
+
+if USB_MTU3
+choice
+	bool "MTU3 Mode Selection"
+	default USB_MTU3_DUAL_ROLE if (USB && USB_GADGET)
+	default USB_MTU3_HOST if (USB && !USB_GADGET)
+	default USB_MTU3_GADGET if (!USB && USB_GADGET)
+
+config USB_MTU3_HOST
+	bool "Host only mode"
+	depends on USB=y || USB=USB_MTU3
+	help
+	  Select this when you want to use MTU3 in host mode only,
+	  thereby the gadget feature will be regressed.
+
+config USB_MTU3_GADGET
+	bool "Gadget only mode"
+	depends on USB_GADGET=y || USB_GADGET=USB_MTU3
+	help
+	  Select this when you want to use MTU3 in gadget mode only,
+	  thereby the host feature will be regressed.
+
+config USB_MTU3_DUAL_ROLE
+	bool "Dual Role mode"
+	depends on ((USB=y || USB=USB_MTU3) && (USB_GADGET=y || USB_GADGET=USB_MTU3))
+	depends on (EXTCON=y || EXTCON=USB_MTU3)
+	select USB_ROLE_SWITCH
+	help
+	  This is the default mode of working of MTU3 controller where
+	  both host and gadget features are enabled.
+
+endchoice
+
+config USB_MTU3_DEBUG
+	bool "Enable Debugging Messages"
+	help
+	  Say Y here to enable debugging messages in the MTU3 Driver.
+
+endif
diff --git a/drivers/usb/mtu3/Makefile b/drivers/usb/mtu3/Makefile
new file mode 100644
index 000000000..3bf8cbcc1
--- /dev/null
+++ b/drivers/usb/mtu3/Makefile
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+
+ccflags-$(CONFIG_USB_MTU3_DEBUG)	+= -DDEBUG
+
+# define_trace.h needs to know how to find our header
+CFLAGS_mtu3_trace.o	:= -I$(src)
+
+obj-$(CONFIG_USB_MTU3)	+= mtu3.o
+
+mtu3-y	:= mtu3_plat.o
+
+ifneq ($(CONFIG_TRACING),)
+	mtu3-y	+= mtu3_trace.o
+endif
+
+ifneq ($(filter y,$(CONFIG_USB_MTU3_HOST) $(CONFIG_USB_MTU3_DUAL_ROLE)),)
+	mtu3-y	+= mtu3_host.o
+endif
+
+ifneq ($(filter y,$(CONFIG_USB_MTU3_GADGET) $(CONFIG_USB_MTU3_DUAL_ROLE)),)
+	mtu3-y	+= mtu3_core.o mtu3_gadget_ep0.o mtu3_gadget.o mtu3_qmu.o
+endif
+
+ifneq ($(CONFIG_USB_MTU3_DUAL_ROLE),)
+	mtu3-y	+= mtu3_dr.o
+endif
+
+ifneq ($(CONFIG_DEBUG_FS),)
+	mtu3-y	+= mtu3_debugfs.o
+endif
diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
new file mode 100644
index 000000000..2d7b57e07
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3.h
@@ -0,0 +1,440 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * mtu3.h - MediaTek USB3 DRD header
+ *
+ * Copyright (C) 2016 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#ifndef __MTU3_H__
+#define __MTU3_H__
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/extcon.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/phy/phy.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/role.h>
+
+struct mtu3;
+struct mtu3_ep;
+struct mtu3_request;
+
+#include "mtu3_hw_regs.h"
+#include "mtu3_qmu.h"
+
+#define	MU3D_EP_TXCR0(epnum)	(U3D_TX1CSR0 + (((epnum) - 1) * 0x10))
+#define	MU3D_EP_TXCR1(epnum)	(U3D_TX1CSR1 + (((epnum) - 1) * 0x10))
+#define	MU3D_EP_TXCR2(epnum)	(U3D_TX1CSR2 + (((epnum) - 1) * 0x10))
+
+#define	MU3D_EP_RXCR0(epnum)	(U3D_RX1CSR0 + (((epnum) - 1) * 0x10))
+#define	MU3D_EP_RXCR1(epnum)	(U3D_RX1CSR1 + (((epnum) - 1) * 0x10))
+#define	MU3D_EP_RXCR2(epnum)	(U3D_RX1CSR2 + (((epnum) - 1) * 0x10))
+
+#define USB_QMU_TQHIAR(epnum)	(U3D_TXQHIAR1 + (((epnum) - 1) * 0x4))
+#define USB_QMU_RQHIAR(epnum)	(U3D_RXQHIAR1 + (((epnum) - 1) * 0x4))
+
+#define USB_QMU_RQCSR(epnum)	(U3D_RXQCSR1 + (((epnum) - 1) * 0x10))
+#define USB_QMU_RQSAR(epnum)	(U3D_RXQSAR1 + (((epnum) - 1) * 0x10))
+#define USB_QMU_RQCPR(epnum)	(U3D_RXQCPR1 + (((epnum) - 1) * 0x10))
+
+#define USB_QMU_TQCSR(epnum)	(U3D_TXQCSR1 + (((epnum) - 1) * 0x10))
+#define USB_QMU_TQSAR(epnum)	(U3D_TXQSAR1 + (((epnum) - 1) * 0x10))
+#define USB_QMU_TQCPR(epnum)	(U3D_TXQCPR1 + (((epnum) - 1) * 0x10))
+
+#define SSUSB_U3_CTRL(p)	(U3D_SSUSB_U3_CTRL_0P + ((p) * 0x08))
+#define SSUSB_U2_CTRL(p)	(U3D_SSUSB_U2_CTRL_0P + ((p) * 0x08))
+
+#define MTU3_DRIVER_NAME	"mtu3"
+#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+#define MTU3_EP_ENABLED		BIT(0)
+#define MTU3_EP_STALL		BIT(1)
+#define MTU3_EP_WEDGE		BIT(2)
+#define MTU3_EP_BUSY		BIT(3)
+
+#define MTU3_U3_IP_SLOT_DEFAULT 2
+#define MTU3_U2_IP_SLOT_DEFAULT 1
+
+/**
+ * IP TRUNK version
+ * from 0x1003 version, USB3 Gen2 is supported, two changes affect driver:
+ * 1. MAXPKT and MULTI bits layout of TXCSR1 and RXCSR1 are adjusted,
+ *    but not backward compatible
+ * 2. QMU extend buffer length supported
+ */
+#define MTU3_TRUNK_VERS_1003	0x1003
+
+/**
+ * Normally the device works on HS or SS, to simplify fifo management,
+ * devide fifo into some 512B parts, use bitmap to manage it; And
+ * 128 bits size of bitmap is large enough, that means it can manage
+ * up to 64KB fifo size.
+ * NOTE: MTU3_EP_FIFO_UNIT should be power of two
+ */
+#define MTU3_EP_FIFO_UNIT		(1 << 9)
+#define MTU3_FIFO_BIT_SIZE		128
+#define MTU3_U2_IP_EP0_FIFO_SIZE	64
+
+/**
+ * Maximum size of ep0 response buffer for ch9 requests,
+ * the SET_SEL request uses 6 so far, and GET_STATUS is 2
+ */
+#define EP0_RESPONSE_BUF  6
+
+#define BULK_CLKS_CNT	4
+
+/* device operated link and speed got from DEVICE_CONF register */
+enum mtu3_speed {
+	MTU3_SPEED_INACTIVE = 0,
+	MTU3_SPEED_FULL = 1,
+	MTU3_SPEED_HIGH = 3,
+	MTU3_SPEED_SUPER = 4,
+	MTU3_SPEED_SUPER_PLUS = 5,
+};
+
+/**
+ * @MU3D_EP0_STATE_SETUP: waits for SETUP or received a SETUP
+ *		without data stage.
+ * @MU3D_EP0_STATE_TX: IN data stage
+ * @MU3D_EP0_STATE_RX: OUT data stage
+ * @MU3D_EP0_STATE_TX_END: the last IN data is transferred, and
+ *		waits for its completion interrupt
+ * @MU3D_EP0_STATE_STALL: ep0 is in stall status, will be auto-cleared
+ *		after receives a SETUP.
+ */
+enum mtu3_g_ep0_state {
+	MU3D_EP0_STATE_SETUP = 1,
+	MU3D_EP0_STATE_TX,
+	MU3D_EP0_STATE_RX,
+	MU3D_EP0_STATE_TX_END,
+	MU3D_EP0_STATE_STALL,
+};
+
+/**
+ * MTU3_DR_FORCE_NONE: automatically switch host and periperal mode
+ *		by IDPIN signal.
+ * MTU3_DR_FORCE_HOST: force to enter host mode and override OTG
+ *		IDPIN signal.
+ * MTU3_DR_FORCE_DEVICE: force to enter peripheral mode.
+ */
+enum mtu3_dr_force_mode {
+	MTU3_DR_FORCE_NONE = 0,
+	MTU3_DR_FORCE_HOST,
+	MTU3_DR_FORCE_DEVICE,
+};
+
+/**
+ * @base: the base address of fifo
+ * @limit: the bitmap size in bits
+ * @bitmap: fifo bitmap in unit of @MTU3_EP_FIFO_UNIT
+ */
+struct mtu3_fifo_info {
+	u32 base;
+	u32 limit;
+	DECLARE_BITMAP(bitmap, MTU3_FIFO_BIT_SIZE);
+};
+
+/**
+ * General Purpose Descriptor (GPD):
+ *	The format of TX GPD is a little different from RX one.
+ *	And the size of GPD is 16 bytes.
+ *
+ * @dw0_info:
+ *	bit0: Hardware Own (HWO)
+ *	bit1: Buffer Descriptor Present (BDP), always 0, BD is not supported
+ *	bit2: Bypass (BPS), 1: HW skips this GPD if HWO = 1
+ *	bit6: [EL] Zero Length Packet (ZLP), moved from @dw3_info[29]
+ *	bit7: Interrupt On Completion (IOC)
+ *	bit[31:16]: ([EL] bit[31:12]) allow data buffer length (RX ONLY),
+ *		the buffer length of the data to receive
+ *	bit[23:16]: ([EL] bit[31:24]) extension address (TX ONLY),
+ *		lower 4 bits are extension bits of @buffer,
+ *		upper 4 bits are extension bits of @next_gpd
+ * @next_gpd: Physical address of the next GPD
+ * @buffer: Physical address of the data buffer
+ * @dw3_info:
+ *	bit[15:0]: ([EL] bit[19:0]) data buffer length,
+ *		(TX): the buffer length of the data to transmit
+ *		(RX): The total length of data received
+ *	bit[23:16]: ([EL] bit[31:24]) extension address (RX ONLY),
+ *		lower 4 bits are extension bits of @buffer,
+ *		upper 4 bits are extension bits of @next_gpd
+ *	bit29: ([EL] abandoned) Zero Length Packet (ZLP) (TX ONLY)
+ */
+struct qmu_gpd {
+	__le32 dw0_info;
+	__le32 next_gpd;
+	__le32 buffer;
+	__le32 dw3_info;
+} __packed;
+
+/**
+* dma: physical base address of GPD segment
+* start: virtual base address of GPD segment
+* end: the last GPD element
+* enqueue: the first empty GPD to use
+* dequeue: the first completed GPD serviced by ISR
+* NOTE: the size of GPD ring should be >= 2
+*/
+struct mtu3_gpd_ring {
+	dma_addr_t dma;
+	struct qmu_gpd *start;
+	struct qmu_gpd *end;
+	struct qmu_gpd *enqueue;
+	struct qmu_gpd *dequeue;
+};
+
+/**
+* @vbus: vbus 5V used by host mode
+* @edev: external connector used to detect vbus and iddig changes
+* @id_nb : notifier for iddig(idpin) detection
+* @dr_work : work for drd mode switch, used to avoid sleep in atomic context
+* @desired_role : role desired to switch
+* @default_role : default mode while usb role is USB_ROLE_NONE
+* @role_sw : use USB Role Switch to support dual-role switch, can't use
+*		extcon at the same time, and extcon is deprecated.
+* @role_sw_used : true when the USB Role Switch is used.
+* @is_u3_drd: whether port0 supports usb3.0 dual-role device or not
+* @manual_drd_enabled: it's true when supports dual-role device by debugfs
+*		to switch host/device modes depending on user input.
+*/
+struct otg_switch_mtk {
+	struct regulator *vbus;
+	struct extcon_dev *edev;
+	struct notifier_block id_nb;
+	struct work_struct dr_work;
+	enum usb_role desired_role;
+	enum usb_role default_role;
+	struct usb_role_switch *role_sw;
+	bool role_sw_used;
+	bool is_u3_drd;
+	bool manual_drd_enabled;
+};
+
+/**
+ * @mac_base: register base address of device MAC, exclude xHCI's
+ * @ippc_base: register base address of IP Power and Clock interface (IPPC)
+ * @vusb33: usb3.3V shared by device/host IP
+ * @dr_mode: works in which mode:
+ *		host only, device only or dual-role mode
+ * @u2_ports: number of usb2.0 host ports
+ * @u3_ports: number of usb3.0 host ports
+ * @u2p_dis_msk: mask of disabling usb2 ports, e.g. bit0==1 to
+ *		disable u2port0, bit1==1 to disable u2port1,... etc,
+ *		but when use dual-role mode, can't disable u2port0
+ * @u3p_dis_msk: mask of disabling usb3 ports, for example, bit0==1 to
+ *		disable u3port0, bit1==1 to disable u3port1,... etc
+ * @dbgfs_root: only used when supports manual dual-role switch via debugfs
+ * @uwk_en: it's true when supports remote wakeup in host mode
+ * @uwk: syscon including usb wakeup glue layer between SSUSB IP and SPM
+ * @uwk_reg_base: the base address of the wakeup glue layer in @uwk
+ * @uwk_vers: the version of the wakeup glue layer
+ */
+struct ssusb_mtk {
+	struct device *dev;
+	struct mtu3 *u3d;
+	void __iomem *mac_base;
+	void __iomem *ippc_base;
+	struct phy **phys;
+	int num_phys;
+	int wakeup_irq;
+	/* common power & clock */
+	struct regulator *vusb33;
+	struct clk_bulk_data clks[BULK_CLKS_CNT];
+	/* otg */
+	struct otg_switch_mtk otg_switch;
+	enum usb_dr_mode dr_mode;
+	bool is_host;
+	int u2_ports;
+	int u3_ports;
+	int u2p_dis_msk;
+	int u3p_dis_msk;
+	struct dentry *dbgfs_root;
+	/* usb wakeup for host mode */
+	bool uwk_en;
+	struct regmap *uwk;
+	u32 uwk_reg_base;
+	u32 uwk_vers;
+};
+
+/**
+ * @fifo_size: it is (@slot + 1) * @fifo_seg_size
+ * @fifo_seg_size: it is roundup_pow_of_two(@maxp)
+ */
+struct mtu3_ep {
+	struct usb_ep ep;
+	char name[12];
+	struct mtu3 *mtu;
+	u8 epnum;
+	u8 type;
+	u8 is_in;
+	u16 maxp;
+	int slot;
+	u32 fifo_size;
+	u32 fifo_addr;
+	u32 fifo_seg_size;
+	struct mtu3_fifo_info *fifo;
+
+	struct list_head req_list;
+	struct mtu3_gpd_ring gpd_ring;
+	const struct usb_ss_ep_comp_descriptor *comp_desc;
+	const struct usb_endpoint_descriptor *desc;
+
+	int flags;
+};
+
+struct mtu3_request {
+	struct usb_request request;
+	struct list_head list;
+	struct mtu3_ep *mep;
+	struct mtu3 *mtu;
+	struct qmu_gpd *gpd;
+	int epnum;
+};
+
+static inline struct ssusb_mtk *dev_to_ssusb(struct device *dev)
+{
+	return dev_get_drvdata(dev);
+}
+
+/**
+ * struct mtu3 - device driver instance data.
+ * @slot: MTU3_U2_IP_SLOT_DEFAULT for U2 IP only,
+ *		MTU3_U3_IP_SLOT_DEFAULT for U3 IP
+ * @may_wakeup: means device's remote wakeup is enabled
+ * @is_self_powered: is reported in device status and the config descriptor
+ * @delayed_status: true when function drivers ask for delayed status
+ * @gen2cp: compatible with USB3 Gen2 IP
+ * @ep0_req: dummy request used while handling standard USB requests
+ *		for GET_STATUS and SET_SEL
+ * @setup_buf: ep0 response buffer for GET_STATUS and SET_SEL requests
+ * @u3_capable: is capable of supporting USB3
+ */
+struct mtu3 {
+	spinlock_t lock;
+	struct ssusb_mtk *ssusb;
+	struct device *dev;
+	void __iomem *mac_base;
+	void __iomem *ippc_base;
+	int irq;
+
+	struct mtu3_fifo_info tx_fifo;
+	struct mtu3_fifo_info rx_fifo;
+
+	struct mtu3_ep *ep_array;
+	struct mtu3_ep *in_eps;
+	struct mtu3_ep *out_eps;
+	struct mtu3_ep *ep0;
+	int num_eps;
+	int slot;
+	int active_ep;
+
+	struct dma_pool	*qmu_gpd_pool;
+	enum mtu3_g_ep0_state ep0_state;
+	struct usb_gadget g;	/* the gadget */
+	struct usb_gadget_driver *gadget_driver;
+	struct mtu3_request ep0_req;
+	u8 setup_buf[EP0_RESPONSE_BUF];
+	enum usb_device_speed max_speed;
+	enum usb_device_speed speed;
+
+	unsigned is_active:1;
+	unsigned may_wakeup:1;
+	unsigned is_self_powered:1;
+	unsigned test_mode:1;
+	unsigned softconnect:1;
+	unsigned u1_enable:1;
+	unsigned u2_enable:1;
+	unsigned u3_capable:1;
+	unsigned delayed_status:1;
+	unsigned gen2cp:1;
+	unsigned connected:1;
+	unsigned async_callbacks:1;
+	unsigned separate_fifo:1;
+
+	u8 address;
+	u8 test_mode_nr;
+	u32 hw_version;
+};
+
+static inline struct mtu3 *gadget_to_mtu3(struct usb_gadget *g)
+{
+	return container_of(g, struct mtu3, g);
+}
+
+static inline struct mtu3_request *to_mtu3_request(struct usb_request *req)
+{
+	return req ? container_of(req, struct mtu3_request, request) : NULL;
+}
+
+static inline struct mtu3_ep *to_mtu3_ep(struct usb_ep *ep)
+{
+	return ep ? container_of(ep, struct mtu3_ep, ep) : NULL;
+}
+
+static inline struct mtu3_request *next_request(struct mtu3_ep *mep)
+{
+	return list_first_entry_or_null(&mep->req_list, struct mtu3_request,
+					list);
+}
+
+static inline void mtu3_writel(void __iomem *base, u32 offset, u32 data)
+{
+	writel(data, base + offset);
+}
+
+static inline u32 mtu3_readl(void __iomem *base, u32 offset)
+{
+	return readl(base + offset);
+}
+
+static inline void mtu3_setbits(void __iomem *base, u32 offset, u32 bits)
+{
+	void __iomem *addr = base + offset;
+	u32 tmp = readl(addr);
+
+	writel((tmp | (bits)), addr);
+}
+
+static inline void mtu3_clrbits(void __iomem *base, u32 offset, u32 bits)
+{
+	void __iomem *addr = base + offset;
+	u32 tmp = readl(addr);
+
+	writel((tmp & ~(bits)), addr);
+}
+
+int ssusb_check_clocks(struct ssusb_mtk *ssusb, u32 ex_clks);
+struct usb_request *mtu3_alloc_request(struct usb_ep *ep, gfp_t gfp_flags);
+void mtu3_free_request(struct usb_ep *ep, struct usb_request *req);
+void mtu3_req_complete(struct mtu3_ep *mep,
+		struct usb_request *req, int status);
+
+int mtu3_config_ep(struct mtu3 *mtu, struct mtu3_ep *mep,
+		int interval, int burst, int mult);
+void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep);
+void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set);
+void mtu3_start(struct mtu3 *mtu);
+void mtu3_stop(struct mtu3 *mtu);
+void mtu3_dev_on_off(struct mtu3 *mtu, int is_on);
+
+int mtu3_gadget_setup(struct mtu3 *mtu);
+void mtu3_gadget_cleanup(struct mtu3 *mtu);
+void mtu3_gadget_reset(struct mtu3 *mtu);
+void mtu3_gadget_suspend(struct mtu3 *mtu);
+void mtu3_gadget_resume(struct mtu3 *mtu);
+void mtu3_gadget_disconnect(struct mtu3 *mtu);
+
+irqreturn_t mtu3_ep0_isr(struct mtu3 *mtu);
+extern const struct usb_ep_ops mtu3_ep0_ops;
+
+#endif
diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
new file mode 100644
index 000000000..a3a628289
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -0,0 +1,1059 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * mtu3_core.c - hardware access layer and gadget init/exit of
+ *                     MediaTek usb3 Dual-Role Controller Driver
+ *
+ * Copyright (C) 2016 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+
+#include "mtu3.h"
+#include "mtu3_dr.h"
+#include "mtu3_debug.h"
+#include "mtu3_trace.h"
+
+static int ep_fifo_alloc(struct mtu3_ep *mep, u32 seg_size)
+{
+	struct mtu3_fifo_info *fifo = mep->fifo;
+	u32 num_bits = DIV_ROUND_UP(seg_size, MTU3_EP_FIFO_UNIT);
+	u32 start_bit;
+
+	/* ensure that @mep->fifo_seg_size is power of two */
+	num_bits = roundup_pow_of_two(num_bits);
+	if (num_bits > fifo->limit)
+		return -EINVAL;
+
+	mep->fifo_seg_size = num_bits * MTU3_EP_FIFO_UNIT;
+	num_bits = num_bits * (mep->slot + 1);
+	start_bit = bitmap_find_next_zero_area(fifo->bitmap,
+			fifo->limit, 0, num_bits, 0);
+	if (start_bit >= fifo->limit)
+		return -EOVERFLOW;
+
+	bitmap_set(fifo->bitmap, start_bit, num_bits);
+	mep->fifo_size = num_bits * MTU3_EP_FIFO_UNIT;
+	mep->fifo_addr = fifo->base + MTU3_EP_FIFO_UNIT * start_bit;
+
+	dev_dbg(mep->mtu->dev, "%s fifo:%#x/%#x, start_bit: %d\n",
+		__func__, mep->fifo_seg_size, mep->fifo_size, start_bit);
+
+	return mep->fifo_addr;
+}
+
+static void ep_fifo_free(struct mtu3_ep *mep)
+{
+	struct mtu3_fifo_info *fifo = mep->fifo;
+	u32 addr = mep->fifo_addr;
+	u32 bits = mep->fifo_size / MTU3_EP_FIFO_UNIT;
+	u32 start_bit;
+
+	if (unlikely(addr < fifo->base || bits > fifo->limit))
+		return;
+
+	start_bit = (addr - fifo->base) / MTU3_EP_FIFO_UNIT;
+	bitmap_clear(fifo->bitmap, start_bit, bits);
+	mep->fifo_size = 0;
+	mep->fifo_seg_size = 0;
+
+	dev_dbg(mep->mtu->dev, "%s size:%#x/%#x, start_bit: %d\n",
+		__func__, mep->fifo_seg_size, mep->fifo_size, start_bit);
+}
+
+/* enable/disable U3D SS function */
+static inline void mtu3_ss_func_set(struct mtu3 *mtu, bool enable)
+{
+	/* If usb3_en==0, LTSSM will go to SS.Disable state */
+	if (enable)
+		mtu3_setbits(mtu->mac_base, U3D_USB3_CONFIG, USB3_EN);
+	else
+		mtu3_clrbits(mtu->mac_base, U3D_USB3_CONFIG, USB3_EN);
+
+	dev_dbg(mtu->dev, "USB3_EN = %d\n", !!enable);
+}
+
+/* set/clear U3D HS device soft connect */
+static inline void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable)
+{
+	if (enable) {
+		mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT,
+			SOFT_CONN | SUSPENDM_ENABLE);
+	} else {
+		mtu3_clrbits(mtu->mac_base, U3D_POWER_MANAGEMENT,
+			SOFT_CONN | SUSPENDM_ENABLE);
+	}
+	dev_dbg(mtu->dev, "SOFTCONN = %d\n", !!enable);
+}
+
+/* only port0 of U2/U3 supports device mode */
+static int mtu3_device_enable(struct mtu3 *mtu)
+{
+	void __iomem *ibase = mtu->ippc_base;
+	u32 check_clk = 0;
+
+	mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
+
+	if (mtu->u3_capable) {
+		check_clk = SSUSB_U3_MAC_RST_B_STS;
+		mtu3_clrbits(ibase, SSUSB_U3_CTRL(0),
+			(SSUSB_U3_PORT_DIS | SSUSB_U3_PORT_PDN |
+			SSUSB_U3_PORT_HOST_SEL));
+	}
+	mtu3_clrbits(ibase, SSUSB_U2_CTRL(0),
+		(SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN |
+		SSUSB_U2_PORT_HOST_SEL));
+
+	if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG) {
+		mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+		if (mtu->u3_capable)
+			mtu3_setbits(ibase, SSUSB_U3_CTRL(0),
+				     SSUSB_U3_PORT_DUAL_MODE);
+	}
+
+	return ssusb_check_clocks(mtu->ssusb, check_clk);
+}
+
+static void mtu3_device_disable(struct mtu3 *mtu)
+{
+	void __iomem *ibase = mtu->ippc_base;
+
+	if (mtu->u3_capable)
+		mtu3_setbits(ibase, SSUSB_U3_CTRL(0),
+			(SSUSB_U3_PORT_DIS | SSUSB_U3_PORT_PDN));
+
+	mtu3_setbits(ibase, SSUSB_U2_CTRL(0),
+		SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN);
+
+	if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG) {
+		mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+		if (mtu->u3_capable)
+			mtu3_clrbits(ibase, SSUSB_U3_CTRL(0),
+				     SSUSB_U3_PORT_DUAL_MODE);
+	}
+
+	mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
+}
+
+static void mtu3_dev_power_on(struct mtu3 *mtu)
+{
+	void __iomem *ibase = mtu->ippc_base;
+
+	mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
+	if (mtu->u3_capable)
+		mtu3_clrbits(ibase, SSUSB_U3_CTRL(0), SSUSB_U3_PORT_PDN);
+
+	mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_PDN);
+}
+
+static void mtu3_dev_power_down(struct mtu3 *mtu)
+{
+	void __iomem *ibase = mtu->ippc_base;
+
+	if (mtu->u3_capable)
+		mtu3_setbits(ibase, SSUSB_U3_CTRL(0), SSUSB_U3_PORT_PDN);
+
+	mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_PDN);
+	mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
+}
+
+/* reset U3D's device module. */
+static void mtu3_device_reset(struct mtu3 *mtu)
+{
+	void __iomem *ibase = mtu->ippc_base;
+
+	mtu3_setbits(ibase, U3D_SSUSB_DEV_RST_CTRL, SSUSB_DEV_SW_RST);
+	udelay(1);
+	mtu3_clrbits(ibase, U3D_SSUSB_DEV_RST_CTRL, SSUSB_DEV_SW_RST);
+}
+
+static void mtu3_intr_status_clear(struct mtu3 *mtu)
+{
+	void __iomem *mbase = mtu->mac_base;
+
+	/* Clear EP0 and Tx/Rx EPn interrupts status */
+	mtu3_writel(mbase, U3D_EPISR, ~0x0);
+	/* Clear U2 USB common interrupts status */
+	mtu3_writel(mbase, U3D_COMMON_USB_INTR, ~0x0);
+	/* Clear U3 LTSSM interrupts status */
+	mtu3_writel(mbase, U3D_LTSSM_INTR, ~0x0);
+	/* Clear speed change interrupt status */
+	mtu3_writel(mbase, U3D_DEV_LINK_INTR, ~0x0);
+	/* Clear QMU interrupt status */
+	mtu3_writel(mbase, U3D_QISAR0, ~0x0);
+}
+
+/* disable all interrupts */
+static void mtu3_intr_disable(struct mtu3 *mtu)
+{
+	/* Disable level 1 interrupts */
+	mtu3_writel(mtu->mac_base, U3D_LV1IECR, ~0x0);
+	/* Disable endpoint interrupts */
+	mtu3_writel(mtu->mac_base, U3D_EPIECR, ~0x0);
+	mtu3_intr_status_clear(mtu);
+}
+
+/* enable system global interrupt */
+static void mtu3_intr_enable(struct mtu3 *mtu)
+{
+	void __iomem *mbase = mtu->mac_base;
+	u32 value;
+
+	/*Enable level 1 interrupts (BMU, QMU, MAC3, DMA, MAC2, EPCTL) */
+	value = BMU_INTR | QMU_INTR | MAC3_INTR | MAC2_INTR | EP_CTRL_INTR;
+	mtu3_writel(mbase, U3D_LV1IESR, value);
+
+	/* Enable U2 common USB interrupts */
+	value = SUSPEND_INTR | RESUME_INTR | RESET_INTR;
+	mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value);
+
+	if (mtu->u3_capable) {
+		/* Enable U3 LTSSM interrupts */
+		value = HOT_RST_INTR | WARM_RST_INTR |
+			ENTER_U3_INTR | EXIT_U3_INTR;
+		mtu3_writel(mbase, U3D_LTSSM_INTR_ENABLE, value);
+	}
+
+	/* Enable QMU interrupts. */
+	value = TXQ_CSERR_INT | TXQ_LENERR_INT | RXQ_CSERR_INT |
+			RXQ_LENERR_INT | RXQ_ZLPERR_INT;
+	mtu3_writel(mbase, U3D_QIESR1, value);
+
+	/* Enable speed change interrupt */
+	mtu3_writel(mbase, U3D_DEV_LINK_INTR_ENABLE, SSUSB_DEV_SPEED_CHG_INTR);
+}
+
+static void mtu3_set_speed(struct mtu3 *mtu, enum usb_device_speed speed)
+{
+	void __iomem *mbase = mtu->mac_base;
+
+	if (speed > mtu->max_speed)
+		speed = mtu->max_speed;
+
+	switch (speed) {
+	case USB_SPEED_FULL:
+		/* disable U3 SS function */
+		mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
+		/* disable HS function */
+		mtu3_clrbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
+		break;
+	case USB_SPEED_HIGH:
+		mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
+		/* HS/FS detected by HW */
+		mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
+		break;
+	case USB_SPEED_SUPER:
+		mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
+		mtu3_clrbits(mtu->ippc_base, SSUSB_U3_CTRL(0),
+			     SSUSB_U3_PORT_SSP_SPEED);
+		break;
+	case USB_SPEED_SUPER_PLUS:
+		mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
+		mtu3_setbits(mtu->ippc_base, SSUSB_U3_CTRL(0),
+			     SSUSB_U3_PORT_SSP_SPEED);
+		break;
+	default:
+		dev_err(mtu->dev, "invalid speed: %s\n",
+			usb_speed_string(speed));
+		return;
+	}
+
+	mtu->speed = speed;
+	dev_dbg(mtu->dev, "set speed: %s\n", usb_speed_string(speed));
+}
+
+/* CSR registers will be reset to default value if port is disabled */
+static void mtu3_csr_init(struct mtu3 *mtu)
+{
+	void __iomem *mbase = mtu->mac_base;
+
+	if (mtu->u3_capable) {
+		/* disable LGO_U1/U2 by default */
+		mtu3_clrbits(mbase, U3D_LINK_POWER_CONTROL,
+				SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE);
+		/* enable accept LGO_U1/U2 link command from host */
+		mtu3_setbits(mbase, U3D_LINK_POWER_CONTROL,
+				SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE);
+		/* device responses to u3_exit from host automatically */
+		mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN);
+		/* automatically build U2 link when U3 detect fail */
+		mtu3_setbits(mbase, U3D_USB2_TEST_MODE, U2U3_AUTO_SWITCH);
+		/* auto clear SOFT_CONN when clear USB3_EN if work as HS */
+		mtu3_setbits(mbase, U3D_U3U2_SWITCH_CTRL, SOFTCON_CLR_AUTO_EN);
+	}
+
+	/* delay about 0.1us from detecting reset to send chirp-K */
+	mtu3_clrbits(mbase, U3D_LINK_RESET_INFO, WTCHRP_MSK);
+	/* enable automatical HWRW from L1 */
+	mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, LPM_HRWE);
+}
+
+/* reset: u2 - data toggle, u3 - SeqN, flow control status etc */
+static void mtu3_ep_reset(struct mtu3_ep *mep)
+{
+	struct mtu3 *mtu = mep->mtu;
+	u32 rst_bit = EP_RST(mep->is_in, mep->epnum);
+
+	mtu3_setbits(mtu->mac_base, U3D_EP_RST, rst_bit);
+	mtu3_clrbits(mtu->mac_base, U3D_EP_RST, rst_bit);
+}
+
+/* set/clear the stall and toggle bits for non-ep0 */
+void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set)
+{
+	struct mtu3 *mtu = mep->mtu;
+	void __iomem *mbase = mtu->mac_base;
+	u8 epnum = mep->epnum;
+	u32 csr;
+
+	if (mep->is_in) {	/* TX */
+		csr = mtu3_readl(mbase, MU3D_EP_TXCR0(epnum)) & TX_W1C_BITS;
+		if (set)
+			csr |= TX_SENDSTALL;
+		else
+			csr = (csr & (~TX_SENDSTALL)) | TX_SENTSTALL;
+		mtu3_writel(mbase, MU3D_EP_TXCR0(epnum), csr);
+	} else {	/* RX */
+		csr = mtu3_readl(mbase, MU3D_EP_RXCR0(epnum)) & RX_W1C_BITS;
+		if (set)
+			csr |= RX_SENDSTALL;
+		else
+			csr = (csr & (~RX_SENDSTALL)) | RX_SENTSTALL;
+		mtu3_writel(mbase, MU3D_EP_RXCR0(epnum), csr);
+	}
+
+	if (!set) {
+		mtu3_ep_reset(mep);
+		mep->flags &= ~MTU3_EP_STALL;
+	} else {
+		mep->flags |= MTU3_EP_STALL;
+	}
+
+	dev_dbg(mtu->dev, "%s: %s\n", mep->name,
+		set ? "SEND STALL" : "CLEAR STALL, with EP RESET");
+}
+
+void mtu3_dev_on_off(struct mtu3 *mtu, int is_on)
+{
+	if (mtu->u3_capable && mtu->speed >= USB_SPEED_SUPER)
+		mtu3_ss_func_set(mtu, is_on);
+	else
+		mtu3_hs_softconn_set(mtu, is_on);
+
+	dev_info(mtu->dev, "gadget (%s) pullup D%s\n",
+		usb_speed_string(mtu->speed), is_on ? "+" : "-");
+}
+
+void mtu3_start(struct mtu3 *mtu)
+{
+	void __iomem *mbase = mtu->mac_base;
+
+	dev_dbg(mtu->dev, "%s devctl 0x%x\n", __func__,
+		mtu3_readl(mbase, U3D_DEVICE_CONTROL));
+
+	mtu3_dev_power_on(mtu);
+	mtu3_csr_init(mtu);
+	mtu3_set_speed(mtu, mtu->speed);
+
+	/* Initialize the default interrupts */
+	mtu3_intr_enable(mtu);
+	mtu->is_active = 1;
+
+	if (mtu->softconnect)
+		mtu3_dev_on_off(mtu, 1);
+}
+
+void mtu3_stop(struct mtu3 *mtu)
+{
+	dev_dbg(mtu->dev, "%s\n", __func__);
+
+	mtu3_intr_disable(mtu);
+
+	if (mtu->softconnect)
+		mtu3_dev_on_off(mtu, 0);
+
+	mtu->is_active = 0;
+	mtu3_dev_power_down(mtu);
+}
+
+static void mtu3_dev_suspend(struct mtu3 *mtu)
+{
+	if (!mtu->is_active)
+		return;
+
+	mtu3_intr_disable(mtu);
+	mtu3_dev_power_down(mtu);
+}
+
+static void mtu3_dev_resume(struct mtu3 *mtu)
+{
+	if (!mtu->is_active)
+		return;
+
+	mtu3_dev_power_on(mtu);
+	mtu3_intr_enable(mtu);
+}
+
+/* for non-ep0 */
+int mtu3_config_ep(struct mtu3 *mtu, struct mtu3_ep *mep,
+			int interval, int burst, int mult)
+{
+	void __iomem *mbase = mtu->mac_base;
+	bool gen2cp = mtu->gen2cp;
+	int epnum = mep->epnum;
+	u32 csr0, csr1, csr2;
+	int fifo_sgsz, fifo_addr;
+	int num_pkts;
+
+	fifo_addr = ep_fifo_alloc(mep, mep->maxp);
+	if (fifo_addr < 0) {
+		dev_err(mtu->dev, "alloc ep fifo failed(%d)\n", mep->maxp);
+		return -ENOMEM;
+	}
+	fifo_sgsz = ilog2(mep->fifo_seg_size);
+	dev_dbg(mtu->dev, "%s fifosz: %x(%x/%x)\n", __func__, fifo_sgsz,
+		mep->fifo_seg_size, mep->fifo_size);
+
+	if (mep->is_in) {
+		csr0 = TX_TXMAXPKTSZ(mep->maxp);
+		csr0 |= TX_DMAREQEN;
+
+		num_pkts = (burst + 1) * (mult + 1) - 1;
+		csr1 = TX_SS_BURST(burst) | TX_SLOT(mep->slot);
+		csr1 |= TX_MAX_PKT(gen2cp, num_pkts) | TX_MULT(gen2cp, mult);
+
+		csr2 = TX_FIFOADDR(fifo_addr >> 4);
+		csr2 |= TX_FIFOSEGSIZE(fifo_sgsz);
+
+		switch (mep->type) {
+		case USB_ENDPOINT_XFER_BULK:
+			csr1 |= TX_TYPE(TYPE_BULK);
+			break;
+		case USB_ENDPOINT_XFER_ISOC:
+			csr1 |= TX_TYPE(TYPE_ISO);
+			csr2 |= TX_BINTERVAL(interval);
+			break;
+		case USB_ENDPOINT_XFER_INT:
+			csr1 |= TX_TYPE(TYPE_INT);
+			csr2 |= TX_BINTERVAL(interval);
+			break;
+		}
+
+		/* Enable QMU Done interrupt */
+		mtu3_setbits(mbase, U3D_QIESR0, QMU_TX_DONE_INT(epnum));
+
+		mtu3_writel(mbase, MU3D_EP_TXCR0(epnum), csr0);
+		mtu3_writel(mbase, MU3D_EP_TXCR1(epnum), csr1);
+		mtu3_writel(mbase, MU3D_EP_TXCR2(epnum), csr2);
+
+		dev_dbg(mtu->dev, "U3D_TX%d CSR0:%#x, CSR1:%#x, CSR2:%#x\n",
+			epnum, mtu3_readl(mbase, MU3D_EP_TXCR0(epnum)),
+			mtu3_readl(mbase, MU3D_EP_TXCR1(epnum)),
+			mtu3_readl(mbase, MU3D_EP_TXCR2(epnum)));
+	} else {
+		csr0 = RX_RXMAXPKTSZ(mep->maxp);
+		csr0 |= RX_DMAREQEN;
+
+		num_pkts = (burst + 1) * (mult + 1) - 1;
+		csr1 = RX_SS_BURST(burst) | RX_SLOT(mep->slot);
+		csr1 |= RX_MAX_PKT(gen2cp, num_pkts) | RX_MULT(gen2cp, mult);
+
+		csr2 = RX_FIFOADDR(fifo_addr >> 4);
+		csr2 |= RX_FIFOSEGSIZE(fifo_sgsz);
+
+		switch (mep->type) {
+		case USB_ENDPOINT_XFER_BULK:
+			csr1 |= RX_TYPE(TYPE_BULK);
+			break;
+		case USB_ENDPOINT_XFER_ISOC:
+			csr1 |= RX_TYPE(TYPE_ISO);
+			csr2 |= RX_BINTERVAL(interval);
+			break;
+		case USB_ENDPOINT_XFER_INT:
+			csr1 |= RX_TYPE(TYPE_INT);
+			csr2 |= RX_BINTERVAL(interval);
+			break;
+		}
+
+		/*Enable QMU Done interrupt */
+		mtu3_setbits(mbase, U3D_QIESR0, QMU_RX_DONE_INT(epnum));
+
+		mtu3_writel(mbase, MU3D_EP_RXCR0(epnum), csr0);
+		mtu3_writel(mbase, MU3D_EP_RXCR1(epnum), csr1);
+		mtu3_writel(mbase, MU3D_EP_RXCR2(epnum), csr2);
+
+		dev_dbg(mtu->dev, "U3D_RX%d CSR0:%#x, CSR1:%#x, CSR2:%#x\n",
+			epnum, mtu3_readl(mbase, MU3D_EP_RXCR0(epnum)),
+			mtu3_readl(mbase, MU3D_EP_RXCR1(epnum)),
+			mtu3_readl(mbase, MU3D_EP_RXCR2(epnum)));
+	}
+
+	dev_dbg(mtu->dev, "csr0:%#x, csr1:%#x, csr2:%#x\n", csr0, csr1, csr2);
+	dev_dbg(mtu->dev, "%s: %s, fifo-addr:%#x, fifo-size:%#x(%#x/%#x)\n",
+		__func__, mep->name, mep->fifo_addr, mep->fifo_size,
+		fifo_sgsz, mep->fifo_seg_size);
+
+	return 0;
+}
+
+/* for non-ep0 */
+void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep)
+{
+	void __iomem *mbase = mtu->mac_base;
+	int epnum = mep->epnum;
+
+	if (mep->is_in) {
+		mtu3_writel(mbase, MU3D_EP_TXCR0(epnum), 0);
+		mtu3_writel(mbase, MU3D_EP_TXCR1(epnum), 0);
+		mtu3_writel(mbase, MU3D_EP_TXCR2(epnum), 0);
+		mtu3_setbits(mbase, U3D_QIECR0, QMU_TX_DONE_INT(epnum));
+	} else {
+		mtu3_writel(mbase, MU3D_EP_RXCR0(epnum), 0);
+		mtu3_writel(mbase, MU3D_EP_RXCR1(epnum), 0);
+		mtu3_writel(mbase, MU3D_EP_RXCR2(epnum), 0);
+		mtu3_setbits(mbase, U3D_QIECR0, QMU_RX_DONE_INT(epnum));
+	}
+
+	mtu3_ep_reset(mep);
+	ep_fifo_free(mep);
+
+	dev_dbg(mtu->dev, "%s: %s\n", __func__, mep->name);
+}
+
+/*
+ * Two scenarios:
+ * 1. when device IP supports SS, the fifo of EP0, TX EPs, RX EPs
+ *	are separated;
+ * 2. when supports only HS, the fifo is shared for all EPs, and
+ *	the capability registers of @EPNTXFFSZ or @EPNRXFFSZ indicate
+ *	the total fifo size of non-ep0, and ep0's is fixed to 64B,
+ *	so the total fifo size is 64B + @EPNTXFFSZ;
+ *	Due to the first 64B should be reserved for EP0, non-ep0's fifo
+ *	starts from offset 64 and are divided into two equal parts for
+ *	TX or RX EPs for simplification.
+ */
+static void get_ep_fifo_config(struct mtu3 *mtu)
+{
+	struct mtu3_fifo_info *tx_fifo;
+	struct mtu3_fifo_info *rx_fifo;
+	u32 fifosize;
+
+	if (mtu->separate_fifo) {
+		fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ);
+		tx_fifo = &mtu->tx_fifo;
+		tx_fifo->base = 0;
+		tx_fifo->limit = fifosize / MTU3_EP_FIFO_UNIT;
+		bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
+
+		fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNRXFFSZ);
+		rx_fifo = &mtu->rx_fifo;
+		rx_fifo->base = 0;
+		rx_fifo->limit = fifosize / MTU3_EP_FIFO_UNIT;
+		bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
+		mtu->slot = MTU3_U3_IP_SLOT_DEFAULT;
+	} else {
+		fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ);
+		tx_fifo = &mtu->tx_fifo;
+		tx_fifo->base = MTU3_U2_IP_EP0_FIFO_SIZE;
+		tx_fifo->limit = (fifosize / MTU3_EP_FIFO_UNIT) >> 1;
+		bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
+
+		rx_fifo = &mtu->rx_fifo;
+		rx_fifo->base =
+			tx_fifo->base + tx_fifo->limit * MTU3_EP_FIFO_UNIT;
+		rx_fifo->limit = tx_fifo->limit;
+		bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
+		mtu->slot = MTU3_U2_IP_SLOT_DEFAULT;
+	}
+
+	dev_dbg(mtu->dev, "%s, TX: base-%d, limit-%d; RX: base-%d, limit-%d\n",
+		__func__, tx_fifo->base, tx_fifo->limit,
+		rx_fifo->base, rx_fifo->limit);
+}
+
+static void mtu3_ep0_setup(struct mtu3 *mtu)
+{
+	u32 maxpacket = mtu->g.ep0->maxpacket;
+	u32 csr;
+
+	dev_dbg(mtu->dev, "%s maxpacket: %d\n", __func__, maxpacket);
+
+	csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR);
+	csr &= ~EP0_MAXPKTSZ_MSK;
+	csr |= EP0_MAXPKTSZ(maxpacket);
+	csr &= EP0_W1C_BITS;
+	mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr);
+
+	/* Enable EP0 interrupt */
+	mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR | SETUPENDISR);
+}
+
+static int mtu3_mem_alloc(struct mtu3 *mtu)
+{
+	void __iomem *mbase = mtu->mac_base;
+	struct mtu3_ep *ep_array;
+	int in_ep_num, out_ep_num;
+	u32 cap_epinfo;
+	int ret;
+	int i;
+
+	cap_epinfo = mtu3_readl(mbase, U3D_CAP_EPINFO);
+	in_ep_num = CAP_TX_EP_NUM(cap_epinfo);
+	out_ep_num = CAP_RX_EP_NUM(cap_epinfo);
+
+	dev_info(mtu->dev, "fifosz/epnum: Tx=%#x/%d, Rx=%#x/%d\n",
+		 mtu3_readl(mbase, U3D_CAP_EPNTXFFSZ), in_ep_num,
+		 mtu3_readl(mbase, U3D_CAP_EPNRXFFSZ), out_ep_num);
+
+	/* one for ep0, another is reserved */
+	mtu->num_eps = min(in_ep_num, out_ep_num) + 1;
+	ep_array = kcalloc(mtu->num_eps * 2, sizeof(*ep_array), GFP_KERNEL);
+	if (ep_array == NULL)
+		return -ENOMEM;
+
+	mtu->ep_array = ep_array;
+	mtu->in_eps = ep_array;
+	mtu->out_eps = &ep_array[mtu->num_eps];
+	/* ep0 uses in_eps[0], out_eps[0] is reserved */
+	mtu->ep0 = mtu->in_eps;
+	mtu->ep0->mtu = mtu;
+	mtu->ep0->epnum = 0;
+
+	for (i = 1; i < mtu->num_eps; i++) {
+		struct mtu3_ep *mep = mtu->in_eps + i;
+
+		mep->fifo = &mtu->tx_fifo;
+		mep = mtu->out_eps + i;
+		mep->fifo = &mtu->rx_fifo;
+	}
+
+	get_ep_fifo_config(mtu);
+
+	ret = mtu3_qmu_init(mtu);
+	if (ret)
+		kfree(mtu->ep_array);
+
+	return ret;
+}
+
+static void mtu3_mem_free(struct mtu3 *mtu)
+{
+	mtu3_qmu_exit(mtu);
+	kfree(mtu->ep_array);
+}
+
+static void mtu3_regs_init(struct mtu3 *mtu)
+{
+	void __iomem *mbase = mtu->mac_base;
+
+	/* be sure interrupts are disabled before registration of ISR */
+	mtu3_intr_disable(mtu);
+
+	mtu3_csr_init(mtu);
+
+	/* U2/U3 detected by HW */
+	mtu3_writel(mbase, U3D_DEVICE_CONF, 0);
+	/* vbus detected by HW */
+	mtu3_clrbits(mbase, U3D_MISC_CTRL, VBUS_FRC_EN | VBUS_ON);
+	/* use new QMU format when HW version >= 0x1003 */
+	if (mtu->gen2cp)
+		mtu3_writel(mbase, U3D_QFCR, ~0x0);
+}
+
+static irqreturn_t mtu3_link_isr(struct mtu3 *mtu)
+{
+	void __iomem *mbase = mtu->mac_base;
+	enum usb_device_speed udev_speed;
+	u32 maxpkt = 64;
+	u32 link;
+	u32 speed;
+
+	link = mtu3_readl(mbase, U3D_DEV_LINK_INTR);
+	link &= mtu3_readl(mbase, U3D_DEV_LINK_INTR_ENABLE);
+	mtu3_writel(mbase, U3D_DEV_LINK_INTR, link); /* W1C */
+	dev_dbg(mtu->dev, "=== LINK[%x] ===\n", link);
+
+	if (!(link & SSUSB_DEV_SPEED_CHG_INTR))
+		return IRQ_NONE;
+
+	speed = SSUSB_DEV_SPEED(mtu3_readl(mbase, U3D_DEVICE_CONF));
+
+	switch (speed) {
+	case MTU3_SPEED_FULL:
+		udev_speed = USB_SPEED_FULL;
+		/*BESLCK = 4 < BESLCK_U3 = 10 < BESLDCK = 15 */
+		mtu3_writel(mbase, U3D_USB20_LPM_PARAMETER, LPM_BESLDCK(0xf)
+				| LPM_BESLCK(4) | LPM_BESLCK_U3(0xa));
+		mtu3_setbits(mbase, U3D_POWER_MANAGEMENT,
+				LPM_BESL_STALL | LPM_BESLD_STALL);
+		break;
+	case MTU3_SPEED_HIGH:
+		udev_speed = USB_SPEED_HIGH;
+		/*BESLCK = 4 < BESLCK_U3 = 10 < BESLDCK = 15 */
+		mtu3_writel(mbase, U3D_USB20_LPM_PARAMETER, LPM_BESLDCK(0xf)
+				| LPM_BESLCK(4) | LPM_BESLCK_U3(0xa));
+		mtu3_setbits(mbase, U3D_POWER_MANAGEMENT,
+				LPM_BESL_STALL | LPM_BESLD_STALL);
+		break;
+	case MTU3_SPEED_SUPER:
+		udev_speed = USB_SPEED_SUPER;
+		maxpkt = 512;
+		break;
+	case MTU3_SPEED_SUPER_PLUS:
+		udev_speed = USB_SPEED_SUPER_PLUS;
+		maxpkt = 512;
+		break;
+	default:
+		udev_speed = USB_SPEED_UNKNOWN;
+		break;
+	}
+	dev_dbg(mtu->dev, "%s: %s\n", __func__, usb_speed_string(udev_speed));
+	mtu3_dbg_trace(mtu->dev, "link speed %s",
+		       usb_speed_string(udev_speed));
+
+	mtu->g.speed = udev_speed;
+	mtu->g.ep0->maxpacket = maxpkt;
+	mtu->ep0_state = MU3D_EP0_STATE_SETUP;
+	mtu->connected = !!(udev_speed != USB_SPEED_UNKNOWN);
+
+	if (udev_speed == USB_SPEED_UNKNOWN) {
+		mtu3_gadget_disconnect(mtu);
+		pm_runtime_put(mtu->dev);
+	} else {
+		pm_runtime_get(mtu->dev);
+		mtu3_ep0_setup(mtu);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mtu3_u3_ltssm_isr(struct mtu3 *mtu)
+{
+	void __iomem *mbase = mtu->mac_base;
+	u32 ltssm;
+
+	ltssm = mtu3_readl(mbase, U3D_LTSSM_INTR);
+	ltssm &= mtu3_readl(mbase, U3D_LTSSM_INTR_ENABLE);
+	mtu3_writel(mbase, U3D_LTSSM_INTR, ltssm); /* W1C */
+	dev_dbg(mtu->dev, "=== LTSSM[%x] ===\n", ltssm);
+	trace_mtu3_u3_ltssm_isr(ltssm);
+
+	if (ltssm & (HOT_RST_INTR | WARM_RST_INTR))
+		mtu3_gadget_reset(mtu);
+
+	if (ltssm & VBUS_FALL_INTR) {
+		mtu3_ss_func_set(mtu, false);
+		mtu3_gadget_reset(mtu);
+	}
+
+	if (ltssm & VBUS_RISE_INTR)
+		mtu3_ss_func_set(mtu, true);
+
+	if (ltssm & EXIT_U3_INTR)
+		mtu3_gadget_resume(mtu);
+
+	if (ltssm & ENTER_U3_INTR)
+		mtu3_gadget_suspend(mtu);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu)
+{
+	void __iomem *mbase = mtu->mac_base;
+	u32 u2comm;
+
+	u2comm = mtu3_readl(mbase, U3D_COMMON_USB_INTR);
+	u2comm &= mtu3_readl(mbase, U3D_COMMON_USB_INTR_ENABLE);
+	mtu3_writel(mbase, U3D_COMMON_USB_INTR, u2comm); /* W1C */
+	dev_dbg(mtu->dev, "=== U2COMM[%x] ===\n", u2comm);
+	trace_mtu3_u2_common_isr(u2comm);
+
+	if (u2comm & SUSPEND_INTR)
+		mtu3_gadget_suspend(mtu);
+
+	if (u2comm & RESUME_INTR)
+		mtu3_gadget_resume(mtu);
+
+	if (u2comm & RESET_INTR)
+		mtu3_gadget_reset(mtu);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mtu3_irq(int irq, void *data)
+{
+	struct mtu3 *mtu = (struct mtu3 *)data;
+	unsigned long flags;
+	u32 level1;
+
+	spin_lock_irqsave(&mtu->lock, flags);
+
+	/* U3D_LV1ISR is RU */
+	level1 = mtu3_readl(mtu->mac_base, U3D_LV1ISR);
+	level1 &= mtu3_readl(mtu->mac_base, U3D_LV1IER);
+
+	if (level1 & EP_CTRL_INTR)
+		mtu3_link_isr(mtu);
+
+	if (level1 & MAC2_INTR)
+		mtu3_u2_common_isr(mtu);
+
+	if (level1 & MAC3_INTR)
+		mtu3_u3_ltssm_isr(mtu);
+
+	if (level1 & BMU_INTR)
+		mtu3_ep0_isr(mtu);
+
+	if (level1 & QMU_INTR)
+		mtu3_qmu_isr(mtu);
+
+	spin_unlock_irqrestore(&mtu->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static void mtu3_check_params(struct mtu3 *mtu)
+{
+	/* device's u3 port (port0) is disabled */
+	if (mtu->u3_capable && (mtu->ssusb->u3p_dis_msk & BIT(0)))
+		mtu->u3_capable = 0;
+
+	/* check the max_speed parameter */
+	switch (mtu->max_speed) {
+	case USB_SPEED_FULL:
+	case USB_SPEED_HIGH:
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+		break;
+	default:
+		dev_err(mtu->dev, "invalid max_speed: %s\n",
+			usb_speed_string(mtu->max_speed));
+		fallthrough;
+	case USB_SPEED_UNKNOWN:
+		/* default as SSP */
+		mtu->max_speed = USB_SPEED_SUPER_PLUS;
+		break;
+	}
+
+	if (!mtu->u3_capable && (mtu->max_speed > USB_SPEED_HIGH))
+		mtu->max_speed = USB_SPEED_HIGH;
+
+	mtu->speed = mtu->max_speed;
+
+	dev_info(mtu->dev, "max_speed: %s\n",
+		 usb_speed_string(mtu->max_speed));
+}
+
+static int mtu3_hw_init(struct mtu3 *mtu)
+{
+	u32 value;
+	int ret;
+
+	value = mtu3_readl(mtu->ippc_base, U3D_SSUSB_IP_TRUNK_VERS);
+	mtu->hw_version = IP_TRUNK_VERS(value);
+	mtu->gen2cp = !!(mtu->hw_version >= MTU3_TRUNK_VERS_1003);
+
+	value = mtu3_readl(mtu->ippc_base, U3D_SSUSB_IP_DEV_CAP);
+	mtu->u3_capable = !!SSUSB_IP_DEV_U3_PORT_NUM(value);
+	/* usb3 ip uses separate fifo */
+	mtu->separate_fifo = mtu->u3_capable;
+
+	dev_info(mtu->dev, "IP version 0x%x(%s IP)\n", mtu->hw_version,
+		mtu->u3_capable ? "U3" : "U2");
+
+	mtu3_check_params(mtu);
+
+	mtu3_device_reset(mtu);
+
+	ret = mtu3_device_enable(mtu);
+	if (ret) {
+		dev_err(mtu->dev, "device enable failed %d\n", ret);
+		return ret;
+	}
+
+	ret = mtu3_mem_alloc(mtu);
+	if (ret)
+		return -ENOMEM;
+
+	mtu3_regs_init(mtu);
+
+	return 0;
+}
+
+static void mtu3_hw_exit(struct mtu3 *mtu)
+{
+	mtu3_device_disable(mtu);
+	mtu3_mem_free(mtu);
+}
+
+/*
+ * we set 32-bit DMA mask by default, here check whether the controller
+ * supports 36-bit DMA or not, if it does, set 36-bit DMA mask.
+ */
+static int mtu3_set_dma_mask(struct mtu3 *mtu)
+{
+	struct device *dev = mtu->dev;
+	bool is_36bit = false;
+	int ret = 0;
+	u32 value;
+
+	value = mtu3_readl(mtu->mac_base, U3D_MISC_CTRL);
+	if (value & DMA_ADDR_36BIT) {
+		is_36bit = true;
+		ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(36));
+		/* If set 36-bit DMA mask fails, fall back to 32-bit DMA mask */
+		if (ret) {
+			is_36bit = false;
+			ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+		}
+	}
+	dev_info(dev, "dma mask: %s bits\n", is_36bit ? "36" : "32");
+
+	return ret;
+}
+
+int ssusb_gadget_init(struct ssusb_mtk *ssusb)
+{
+	struct device *dev = ssusb->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct mtu3 *mtu = NULL;
+	int ret = -ENOMEM;
+
+	mtu = devm_kzalloc(dev, sizeof(struct mtu3), GFP_KERNEL);
+	if (mtu == NULL)
+		return -ENOMEM;
+
+	mtu->irq = platform_get_irq_byname_optional(pdev, "device");
+	if (mtu->irq < 0) {
+		if (mtu->irq == -EPROBE_DEFER)
+			return mtu->irq;
+
+		/* for backward compatibility */
+		mtu->irq = platform_get_irq(pdev, 0);
+		if (mtu->irq < 0)
+			return mtu->irq;
+	}
+	dev_info(dev, "irq %d\n", mtu->irq);
+
+	mtu->mac_base = devm_platform_ioremap_resource_byname(pdev, "mac");
+	if (IS_ERR(mtu->mac_base)) {
+		dev_err(dev, "error mapping memory for dev mac\n");
+		return PTR_ERR(mtu->mac_base);
+	}
+
+	spin_lock_init(&mtu->lock);
+	mtu->dev = dev;
+	mtu->ippc_base = ssusb->ippc_base;
+	ssusb->mac_base	= mtu->mac_base;
+	ssusb->u3d = mtu;
+	mtu->ssusb = ssusb;
+	mtu->max_speed = usb_get_maximum_speed(dev);
+
+	dev_dbg(dev, "mac_base=0x%p, ippc_base=0x%p\n",
+		mtu->mac_base, mtu->ippc_base);
+
+	ret = mtu3_hw_init(mtu);
+	if (ret) {
+		dev_err(dev, "mtu3 hw init failed:%d\n", ret);
+		return ret;
+	}
+
+	ret = mtu3_set_dma_mask(mtu);
+	if (ret) {
+		dev_err(dev, "mtu3 set dma_mask failed:%d\n", ret);
+		goto dma_mask_err;
+	}
+
+	ret = devm_request_threaded_irq(dev, mtu->irq, NULL, mtu3_irq,
+					IRQF_ONESHOT, dev_name(dev), mtu);
+	if (ret) {
+		dev_err(dev, "request irq %d failed!\n", mtu->irq);
+		goto irq_err;
+	}
+
+	/* power down device IP for power saving by default */
+	mtu3_stop(mtu);
+
+	ret = mtu3_gadget_setup(mtu);
+	if (ret) {
+		dev_err(dev, "mtu3 gadget init failed:%d\n", ret);
+		goto gadget_err;
+	}
+
+	ssusb_dev_debugfs_init(ssusb);
+
+	dev_dbg(dev, " %s() done...\n", __func__);
+
+	return 0;
+
+gadget_err:
+	device_init_wakeup(dev, false);
+
+dma_mask_err:
+irq_err:
+	mtu3_hw_exit(mtu);
+	ssusb->u3d = NULL;
+	dev_err(dev, " %s() fail...\n", __func__);
+
+	return ret;
+}
+
+void ssusb_gadget_exit(struct ssusb_mtk *ssusb)
+{
+	struct mtu3 *mtu = ssusb->u3d;
+
+	mtu3_gadget_cleanup(mtu);
+	device_init_wakeup(ssusb->dev, false);
+	mtu3_hw_exit(mtu);
+}
+
+bool ssusb_gadget_ip_sleep_check(struct ssusb_mtk *ssusb)
+{
+	struct mtu3 *mtu = ssusb->u3d;
+
+	/* host only, should wait for ip sleep */
+	if (!mtu)
+		return true;
+
+	/* device is started and pullup D+, ip can sleep */
+	if (mtu->is_active && mtu->softconnect)
+		return true;
+
+	/* ip can't sleep if not pullup D+ when support device mode */
+	return false;
+}
+
+int ssusb_gadget_suspend(struct ssusb_mtk *ssusb, pm_message_t msg)
+{
+	struct mtu3 *mtu = ssusb->u3d;
+
+	if (!mtu->gadget_driver)
+		return 0;
+
+	if (mtu->connected)
+		return -EBUSY;
+
+	mtu3_dev_suspend(mtu);
+	synchronize_irq(mtu->irq);
+
+	return 0;
+}
+
+int ssusb_gadget_resume(struct ssusb_mtk *ssusb, pm_message_t msg)
+{
+	struct mtu3 *mtu = ssusb->u3d;
+
+	if (!mtu->gadget_driver)
+		return 0;
+
+	mtu3_dev_resume(mtu);
+
+	return 0;
+}
diff --git a/drivers/usb/mtu3/mtu3_debug.h b/drivers/usb/mtu3/mtu3_debug.h
new file mode 100644
index 000000000..9a36134b3
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_debug.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * mtu3_debug.h - debug header
+ *
+ * Copyright (C) 2019 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#ifndef __MTU3_DEBUG_H__
+#define __MTU3_DEBUG_H__
+
+#include <linux/debugfs.h>
+
+struct ssusb_mtk;
+
+#define MTU3_DEBUGFS_NAME_LEN 32
+
+struct mtu3_regset {
+	char name[MTU3_DEBUGFS_NAME_LEN];
+	struct debugfs_regset32 regset;
+};
+
+struct mtu3_file_map {
+	const char *name;
+	int (*show)(struct seq_file *s, void *unused);
+};
+
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+void ssusb_dev_debugfs_init(struct ssusb_mtk *ssusb);
+void ssusb_dr_debugfs_init(struct ssusb_mtk *ssusb);
+void ssusb_debugfs_create_root(struct ssusb_mtk *ssusb);
+void ssusb_debugfs_remove_root(struct ssusb_mtk *ssusb);
+
+#else
+static inline void ssusb_dev_debugfs_init(struct ssusb_mtk *ssusb) {}
+static inline void ssusb_dr_debugfs_init(struct ssusb_mtk *ssusb) {}
+static inline void ssusb_debugfs_create_root(struct ssusb_mtk *ssusb) {}
+static inline void ssusb_debugfs_remove_root(struct ssusb_mtk *ssusb) {}
+
+#endif /* CONFIG_DEBUG_FS */
+
+#if IS_ENABLED(CONFIG_TRACING)
+void mtu3_dbg_trace(struct device *dev, const char *fmt, ...);
+
+#else
+static inline void mtu3_dbg_trace(struct device *dev, const char *fmt, ...) {}
+
+#endif /* CONFIG_TRACING */
+
+#endif /* __MTU3_DEBUG_H__ */
diff --git a/drivers/usb/mtu3/mtu3_debugfs.c b/drivers/usb/mtu3/mtu3_debugfs.c
new file mode 100644
index 000000000..f0de99858
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_debugfs.c
@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * mtu3_debugfs.c - debugfs interface
+ *
+ * Copyright (C) 2019 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#include <linux/uaccess.h>
+
+#include "mtu3.h"
+#include "mtu3_dr.h"
+#include "mtu3_debug.h"
+
+#define dump_register(nm)		\
+{					\
+	.name = __stringify(nm),	\
+	.offset = U3D_ ##nm,		\
+}
+
+#define dump_prb_reg(nm, os)	\
+{				\
+	.name = nm,		\
+	.offset = os,		\
+}
+
+static const struct debugfs_reg32 mtu3_ippc_regs[] = {
+	dump_register(SSUSB_IP_PW_CTRL0),
+	dump_register(SSUSB_IP_PW_CTRL1),
+	dump_register(SSUSB_IP_PW_CTRL2),
+	dump_register(SSUSB_IP_PW_CTRL3),
+	dump_register(SSUSB_IP_PW_STS1),
+	dump_register(SSUSB_OTG_STS),
+	dump_register(SSUSB_IP_XHCI_CAP),
+	dump_register(SSUSB_IP_DEV_CAP),
+	dump_register(SSUSB_U3_CTRL_0P),
+	dump_register(SSUSB_U2_CTRL_0P),
+	dump_register(SSUSB_HW_ID),
+	dump_register(SSUSB_HW_SUB_ID),
+	dump_register(SSUSB_IP_SPARE0),
+};
+
+static const struct debugfs_reg32 mtu3_dev_regs[] = {
+	dump_register(LV1ISR),
+	dump_register(LV1IER),
+	dump_register(EPISR),
+	dump_register(EPIER),
+	dump_register(EP0CSR),
+	dump_register(RXCOUNT0),
+	dump_register(QISAR0),
+	dump_register(QIER0),
+	dump_register(QISAR1),
+	dump_register(QIER1),
+	dump_register(CAP_EPNTXFFSZ),
+	dump_register(CAP_EPNRXFFSZ),
+	dump_register(CAP_EPINFO),
+	dump_register(MISC_CTRL),
+};
+
+static const struct debugfs_reg32 mtu3_csr_regs[] = {
+	dump_register(DEVICE_CONF),
+	dump_register(DEV_LINK_INTR_ENABLE),
+	dump_register(DEV_LINK_INTR),
+	dump_register(LTSSM_CTRL),
+	dump_register(USB3_CONFIG),
+	dump_register(LINK_STATE_MACHINE),
+	dump_register(LTSSM_INTR_ENABLE),
+	dump_register(LTSSM_INTR),
+	dump_register(U3U2_SWITCH_CTRL),
+	dump_register(POWER_MANAGEMENT),
+	dump_register(DEVICE_CONTROL),
+	dump_register(COMMON_USB_INTR_ENABLE),
+	dump_register(COMMON_USB_INTR),
+	dump_register(USB20_MISC_CONTROL),
+	dump_register(USB20_OPSTATE),
+};
+
+static int mtu3_link_state_show(struct seq_file *sf, void *unused)
+{
+	struct mtu3 *mtu = sf->private;
+	void __iomem *mbase = mtu->mac_base;
+
+	seq_printf(sf, "opstate: %#x, ltssm: %#x\n",
+		   mtu3_readl(mbase, U3D_USB20_OPSTATE),
+		   LTSSM_STATE(mtu3_readl(mbase, U3D_LINK_STATE_MACHINE)));
+
+	return 0;
+}
+
+static int mtu3_ep_used_show(struct seq_file *sf, void *unused)
+{
+	struct mtu3 *mtu = sf->private;
+	struct mtu3_ep *mep;
+	unsigned long flags;
+	int used = 0;
+	int i;
+
+	spin_lock_irqsave(&mtu->lock, flags);
+
+	for (i = 0; i < mtu->num_eps; i++) {
+		mep = mtu->in_eps + i;
+		if (mep->flags & MTU3_EP_ENABLED) {
+			seq_printf(sf, "%s - type: %s\n", mep->name, usb_ep_type_string(mep->type));
+			used++;
+		}
+
+		mep = mtu->out_eps + i;
+		if (mep->flags & MTU3_EP_ENABLED) {
+			seq_printf(sf, "%s - type: %s\n", mep->name, usb_ep_type_string(mep->type));
+			used++;
+		}
+	}
+	seq_printf(sf, "total used: %d eps\n", used);
+
+	spin_unlock_irqrestore(&mtu->lock, flags);
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(mtu3_link_state);
+DEFINE_SHOW_ATTRIBUTE(mtu3_ep_used);
+
+static void mtu3_debugfs_regset(struct mtu3 *mtu, void __iomem *base,
+				const struct debugfs_reg32 *regs, size_t nregs,
+				const char *name, struct dentry *parent)
+{
+	struct debugfs_regset32 *regset;
+	struct mtu3_regset *mregs;
+
+	mregs = devm_kzalloc(mtu->dev, sizeof(*mregs), GFP_KERNEL);
+	if (!mregs)
+		return;
+
+	sprintf(mregs->name, "%s", name);
+	regset = &mregs->regset;
+	regset->regs = regs;
+	regset->nregs = nregs;
+	regset->base = base;
+
+	debugfs_create_regset32(mregs->name, 0444, parent, regset);
+}
+
+static void mtu3_debugfs_ep_regset(struct mtu3 *mtu, struct mtu3_ep *mep,
+				   struct dentry *parent)
+{
+	struct debugfs_reg32 *regs;
+	int epnum = mep->epnum;
+	int in = mep->is_in;
+
+	regs = devm_kcalloc(mtu->dev, 7, sizeof(*regs), GFP_KERNEL);
+	if (!regs)
+		return;
+
+	regs[0].name = in ? "TCR0" : "RCR0";
+	regs[0].offset = in ? MU3D_EP_TXCR0(epnum) : MU3D_EP_RXCR0(epnum);
+	regs[1].name = in ? "TCR1" : "RCR1";
+	regs[1].offset = in ? MU3D_EP_TXCR1(epnum) : MU3D_EP_RXCR1(epnum);
+	regs[2].name = in ? "TCR2" : "RCR2";
+	regs[2].offset = in ? MU3D_EP_TXCR2(epnum) : MU3D_EP_RXCR2(epnum);
+	regs[3].name = in ? "TQHIAR" : "RQHIAR";
+	regs[3].offset = in ? USB_QMU_TQHIAR(epnum) : USB_QMU_RQHIAR(epnum);
+	regs[4].name = in ? "TQCSR" : "RQCSR";
+	regs[4].offset = in ? USB_QMU_TQCSR(epnum) : USB_QMU_RQCSR(epnum);
+	regs[5].name = in ? "TQSAR" : "RQSAR";
+	regs[5].offset = in ? USB_QMU_TQSAR(epnum) : USB_QMU_RQSAR(epnum);
+	regs[6].name = in ? "TQCPR" : "RQCPR";
+	regs[6].offset = in ? USB_QMU_TQCPR(epnum) : USB_QMU_RQCPR(epnum);
+
+	mtu3_debugfs_regset(mtu, mtu->mac_base, regs, 7, "ep-regs", parent);
+}
+
+static int mtu3_ep_info_show(struct seq_file *sf, void *unused)
+{
+	struct mtu3_ep *mep = sf->private;
+	struct mtu3 *mtu = mep->mtu;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mtu->lock, flags);
+	seq_printf(sf, "ep - type:%s, maxp:%d, slot:%d, flags:%x\n",
+		   usb_ep_type_string(mep->type), mep->maxp, mep->slot, mep->flags);
+	spin_unlock_irqrestore(&mtu->lock, flags);
+
+	return 0;
+}
+
+static int mtu3_fifo_show(struct seq_file *sf, void *unused)
+{
+	struct mtu3_ep *mep = sf->private;
+	struct mtu3 *mtu = mep->mtu;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mtu->lock, flags);
+	seq_printf(sf, "fifo - seg_size:%d, addr:%d, size:%d\n",
+		   mep->fifo_seg_size, mep->fifo_addr, mep->fifo_size);
+	spin_unlock_irqrestore(&mtu->lock, flags);
+
+	return 0;
+}
+
+static int mtu3_qmu_ring_show(struct seq_file *sf, void *unused)
+{
+	struct mtu3_ep *mep = sf->private;
+	struct mtu3 *mtu = mep->mtu;
+	struct mtu3_gpd_ring *ring;
+	unsigned long flags;
+
+	ring = &mep->gpd_ring;
+	spin_lock_irqsave(&mtu->lock, flags);
+	seq_printf(sf,
+		   "qmu-ring - dma:%pad, start:%p, end:%p, enq:%p, dep:%p\n",
+		   &ring->dma, ring->start, ring->end,
+		   ring->enqueue, ring->dequeue);
+	spin_unlock_irqrestore(&mtu->lock, flags);
+
+	return 0;
+}
+
+static int mtu3_qmu_gpd_show(struct seq_file *sf, void *unused)
+{
+	struct mtu3_ep *mep = sf->private;
+	struct mtu3 *mtu = mep->mtu;
+	struct mtu3_gpd_ring *ring;
+	struct qmu_gpd *gpd;
+	dma_addr_t dma;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mtu->lock, flags);
+	ring = &mep->gpd_ring;
+	gpd = ring->start;
+	if (!gpd || !(mep->flags & MTU3_EP_ENABLED)) {
+		seq_puts(sf, "empty!\n");
+		goto out;
+	}
+
+	for (i = 0; i < MAX_GPD_NUM; i++, gpd++) {
+		dma = ring->dma + i * sizeof(*gpd);
+		seq_printf(sf, "gpd.%03d -> %pad, %p: %08x %08x %08x %08x\n",
+			   i, &dma, gpd, gpd->dw0_info, gpd->next_gpd,
+			   gpd->buffer, gpd->dw3_info);
+	}
+
+out:
+	spin_unlock_irqrestore(&mtu->lock, flags);
+
+	return 0;
+}
+
+static const struct mtu3_file_map mtu3_ep_files[] = {
+	{"ep-info", mtu3_ep_info_show, },
+	{"fifo", mtu3_fifo_show, },
+	{"qmu-ring", mtu3_qmu_ring_show, },
+	{"qmu-gpd", mtu3_qmu_gpd_show, },
+};
+
+static int mtu3_ep_open(struct inode *inode, struct file *file)
+{
+	const char *file_name = file_dentry(file)->d_iname;
+	const struct mtu3_file_map *f_map;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mtu3_ep_files); i++) {
+		f_map = &mtu3_ep_files[i];
+
+		if (strcmp(f_map->name, file_name) == 0)
+			break;
+	}
+
+	return single_open(file, f_map->show, inode->i_private);
+}
+
+static const struct file_operations mtu3_ep_fops = {
+	.open = mtu3_ep_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static const struct debugfs_reg32 mtu3_prb_regs[] = {
+	dump_prb_reg("enable", U3D_SSUSB_PRB_CTRL0),
+	dump_prb_reg("byte-sell", U3D_SSUSB_PRB_CTRL1),
+	dump_prb_reg("byte-selh", U3D_SSUSB_PRB_CTRL2),
+	dump_prb_reg("module-sel", U3D_SSUSB_PRB_CTRL3),
+	dump_prb_reg("sw-out", U3D_SSUSB_PRB_CTRL4),
+	dump_prb_reg("data", U3D_SSUSB_PRB_CTRL5),
+};
+
+static int mtu3_probe_show(struct seq_file *sf, void *unused)
+{
+	const char *file_name = file_dentry(sf->file)->d_iname;
+	struct mtu3 *mtu = sf->private;
+	const struct debugfs_reg32 *regs;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mtu3_prb_regs); i++) {
+		regs = &mtu3_prb_regs[i];
+
+		if (strcmp(regs->name, file_name) == 0)
+			break;
+	}
+
+	seq_printf(sf, "0x%04x - 0x%08x\n", (u32)regs->offset,
+		   mtu3_readl(mtu->ippc_base, (u32)regs->offset));
+
+	return 0;
+}
+
+static int mtu3_probe_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mtu3_probe_show, inode->i_private);
+}
+
+static ssize_t mtu3_probe_write(struct file *file, const char __user *ubuf,
+				size_t count, loff_t *ppos)
+{
+	const char *file_name = file_dentry(file)->d_iname;
+	struct seq_file *sf = file->private_data;
+	struct mtu3 *mtu = sf->private;
+	const struct debugfs_reg32 *regs;
+	char buf[32];
+	u32 val;
+	int i;
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	if (kstrtou32(buf, 0, &val))
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(mtu3_prb_regs); i++) {
+		regs = &mtu3_prb_regs[i];
+
+		if (strcmp(regs->name, file_name) == 0)
+			break;
+	}
+	mtu3_writel(mtu->ippc_base, (u32)regs->offset, val);
+
+	return count;
+}
+
+static const struct file_operations mtu3_probe_fops = {
+	.open = mtu3_probe_open,
+	.write = mtu3_probe_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void mtu3_debugfs_create_prb_files(struct mtu3 *mtu)
+{
+	struct ssusb_mtk *ssusb = mtu->ssusb;
+	const struct debugfs_reg32 *regs;
+	struct dentry *dir_prb;
+	int i;
+
+	dir_prb = debugfs_create_dir("probe", ssusb->dbgfs_root);
+
+	for (i = 0; i < ARRAY_SIZE(mtu3_prb_regs); i++) {
+		regs = &mtu3_prb_regs[i];
+		debugfs_create_file(regs->name, 0644, dir_prb,
+				    mtu, &mtu3_probe_fops);
+	}
+
+	mtu3_debugfs_regset(mtu, mtu->ippc_base, mtu3_prb_regs,
+			    ARRAY_SIZE(mtu3_prb_regs), "regs", dir_prb);
+}
+
+static void mtu3_debugfs_create_ep_dir(struct mtu3_ep *mep,
+				       struct dentry *parent)
+{
+	const struct mtu3_file_map *files;
+	struct dentry *dir_ep;
+	int i;
+
+	dir_ep = debugfs_create_dir(mep->name, parent);
+	mtu3_debugfs_ep_regset(mep->mtu, mep, dir_ep);
+
+	for (i = 0; i < ARRAY_SIZE(mtu3_ep_files); i++) {
+		files = &mtu3_ep_files[i];
+
+		debugfs_create_file(files->name, 0444, dir_ep,
+				    mep, &mtu3_ep_fops);
+	}
+}
+
+static void mtu3_debugfs_create_ep_dirs(struct mtu3 *mtu)
+{
+	struct ssusb_mtk *ssusb = mtu->ssusb;
+	struct dentry *dir_eps;
+	int i;
+
+	dir_eps = debugfs_create_dir("eps", ssusb->dbgfs_root);
+
+	for (i = 1; i < mtu->num_eps; i++) {
+		mtu3_debugfs_create_ep_dir(mtu->in_eps + i, dir_eps);
+		mtu3_debugfs_create_ep_dir(mtu->out_eps + i, dir_eps);
+	}
+}
+
+void ssusb_dev_debugfs_init(struct ssusb_mtk *ssusb)
+{
+	struct mtu3 *mtu = ssusb->u3d;
+	struct dentry *dir_regs;
+
+	dir_regs = debugfs_create_dir("regs", ssusb->dbgfs_root);
+
+	mtu3_debugfs_regset(mtu, mtu->ippc_base,
+			    mtu3_ippc_regs, ARRAY_SIZE(mtu3_ippc_regs),
+			    "reg-ippc", dir_regs);
+
+	mtu3_debugfs_regset(mtu, mtu->mac_base,
+			    mtu3_dev_regs, ARRAY_SIZE(mtu3_dev_regs),
+			    "reg-dev", dir_regs);
+
+	mtu3_debugfs_regset(mtu, mtu->mac_base,
+			    mtu3_csr_regs, ARRAY_SIZE(mtu3_csr_regs),
+			    "reg-csr", dir_regs);
+
+	mtu3_debugfs_create_ep_dirs(mtu);
+
+	mtu3_debugfs_create_prb_files(mtu);
+
+	debugfs_create_file("link-state", 0444, ssusb->dbgfs_root,
+			    mtu, &mtu3_link_state_fops);
+	debugfs_create_file("ep-used", 0444, ssusb->dbgfs_root,
+			    mtu, &mtu3_ep_used_fops);
+}
+
+static int ssusb_mode_show(struct seq_file *sf, void *unused)
+{
+	struct ssusb_mtk *ssusb = sf->private;
+
+	seq_printf(sf, "current mode: %s(%s drd)\n(echo device/host)\n",
+		   ssusb->is_host ? "host" : "device",
+		   ssusb->otg_switch.manual_drd_enabled ? "manual" : "auto");
+
+	return 0;
+}
+
+static int ssusb_mode_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ssusb_mode_show, inode->i_private);
+}
+
+static ssize_t ssusb_mode_write(struct file *file, const char __user *ubuf,
+				size_t count, loff_t *ppos)
+{
+	struct seq_file *sf = file->private_data;
+	struct ssusb_mtk *ssusb = sf->private;
+	char buf[16];
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	if (!strncmp(buf, "host", 4) && !ssusb->is_host) {
+		ssusb_mode_switch(ssusb, 1);
+	} else if (!strncmp(buf, "device", 6) && ssusb->is_host) {
+		ssusb_mode_switch(ssusb, 0);
+	} else {
+		dev_err(ssusb->dev, "wrong or duplicated setting\n");
+		return -EINVAL;
+	}
+
+	return count;
+}
+
+static const struct file_operations ssusb_mode_fops = {
+	.open = ssusb_mode_open,
+	.write = ssusb_mode_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static int ssusb_vbus_show(struct seq_file *sf, void *unused)
+{
+	struct ssusb_mtk *ssusb = sf->private;
+	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
+
+	seq_printf(sf, "vbus state: %s\n(echo on/off)\n",
+		   regulator_is_enabled(otg_sx->vbus) ? "on" : "off");
+
+	return 0;
+}
+
+static int ssusb_vbus_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ssusb_vbus_show, inode->i_private);
+}
+
+static ssize_t ssusb_vbus_write(struct file *file, const char __user *ubuf,
+				size_t count, loff_t *ppos)
+{
+	struct seq_file *sf = file->private_data;
+	struct ssusb_mtk *ssusb = sf->private;
+	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
+	char buf[16];
+	bool enable;
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	if (kstrtobool(buf, &enable)) {
+		dev_err(ssusb->dev, "wrong setting\n");
+		return -EINVAL;
+	}
+
+	ssusb_set_vbus(otg_sx, enable);
+
+	return count;
+}
+
+static const struct file_operations ssusb_vbus_fops = {
+	.open = ssusb_vbus_open,
+	.write = ssusb_vbus_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+void ssusb_dr_debugfs_init(struct ssusb_mtk *ssusb)
+{
+	struct dentry *root = ssusb->dbgfs_root;
+
+	debugfs_create_file("mode", 0644, root, ssusb, &ssusb_mode_fops);
+	debugfs_create_file("vbus", 0644, root, ssusb, &ssusb_vbus_fops);
+}
+
+void ssusb_debugfs_create_root(struct ssusb_mtk *ssusb)
+{
+	ssusb->dbgfs_root =
+		debugfs_create_dir(dev_name(ssusb->dev), usb_debug_root);
+}
+
+void ssusb_debugfs_remove_root(struct ssusb_mtk *ssusb)
+{
+	debugfs_remove_recursive(ssusb->dbgfs_root);
+	ssusb->dbgfs_root = NULL;
+}
diff --git a/drivers/usb/mtu3/mtu3_dr.c b/drivers/usb/mtu3/mtu3_dr.c
new file mode 100644
index 000000000..9b8aded3d
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_dr.c
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * mtu3_dr.c - dual role switch and host glue layer
+ *
+ * Copyright (C) 2016 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#include "mtu3.h"
+#include "mtu3_dr.h"
+#include "mtu3_debug.h"
+
+#define USB2_PORT 2
+#define USB3_PORT 3
+
+static inline struct ssusb_mtk *otg_sx_to_ssusb(struct otg_switch_mtk *otg_sx)
+{
+	return container_of(otg_sx, struct ssusb_mtk, otg_switch);
+}
+
+static void toggle_opstate(struct ssusb_mtk *ssusb)
+{
+	mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION);
+	mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN);
+}
+
+/* only port0 supports dual-role mode */
+static int ssusb_port0_switch(struct ssusb_mtk *ssusb,
+	int version, bool tohost)
+{
+	void __iomem *ibase = ssusb->ippc_base;
+	u32 value;
+
+	dev_dbg(ssusb->dev, "%s (switch u%d port0 to %s)\n", __func__,
+		version, tohost ? "host" : "device");
+
+	if (version == USB2_PORT) {
+		/* 1. power off and disable u2 port0 */
+		value = mtu3_readl(ibase, SSUSB_U2_CTRL(0));
+		value |= SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS;
+		mtu3_writel(ibase, SSUSB_U2_CTRL(0), value);
+
+		/* 2. power on, enable u2 port0 and select its mode */
+		value = mtu3_readl(ibase, SSUSB_U2_CTRL(0));
+		value &= ~(SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS);
+		value = tohost ? (value | SSUSB_U2_PORT_HOST_SEL) :
+			(value & (~SSUSB_U2_PORT_HOST_SEL));
+		mtu3_writel(ibase, SSUSB_U2_CTRL(0), value);
+	} else {
+		/* 1. power off and disable u3 port0 */
+		value = mtu3_readl(ibase, SSUSB_U3_CTRL(0));
+		value |= SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS;
+		mtu3_writel(ibase, SSUSB_U3_CTRL(0), value);
+
+		/* 2. power on, enable u3 port0 and select its mode */
+		value = mtu3_readl(ibase, SSUSB_U3_CTRL(0));
+		value &= ~(SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS);
+		value = tohost ? (value | SSUSB_U3_PORT_HOST_SEL) :
+			(value & (~SSUSB_U3_PORT_HOST_SEL));
+		mtu3_writel(ibase, SSUSB_U3_CTRL(0), value);
+	}
+
+	return 0;
+}
+
+static void switch_port_to_host(struct ssusb_mtk *ssusb)
+{
+	u32 check_clk = 0;
+
+	dev_dbg(ssusb->dev, "%s\n", __func__);
+
+	ssusb_port0_switch(ssusb, USB2_PORT, true);
+
+	if (ssusb->otg_switch.is_u3_drd) {
+		ssusb_port0_switch(ssusb, USB3_PORT, true);
+		check_clk = SSUSB_U3_MAC_RST_B_STS;
+	}
+
+	ssusb_check_clocks(ssusb, check_clk);
+
+	/* after all clocks are stable */
+	toggle_opstate(ssusb);
+}
+
+static void switch_port_to_device(struct ssusb_mtk *ssusb)
+{
+	u32 check_clk = 0;
+
+	dev_dbg(ssusb->dev, "%s\n", __func__);
+
+	ssusb_port0_switch(ssusb, USB2_PORT, false);
+
+	if (ssusb->otg_switch.is_u3_drd) {
+		ssusb_port0_switch(ssusb, USB3_PORT, false);
+		check_clk = SSUSB_U3_MAC_RST_B_STS;
+	}
+
+	ssusb_check_clocks(ssusb, check_clk);
+}
+
+int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on)
+{
+	struct ssusb_mtk *ssusb = otg_sx_to_ssusb(otg_sx);
+	struct regulator *vbus = otg_sx->vbus;
+	int ret;
+
+	/* vbus is optional */
+	if (!vbus)
+		return 0;
+
+	dev_dbg(ssusb->dev, "%s: turn %s\n", __func__, is_on ? "on" : "off");
+
+	if (is_on) {
+		ret = regulator_enable(vbus);
+		if (ret) {
+			dev_err(ssusb->dev, "vbus regulator enable failed\n");
+			return ret;
+		}
+	} else {
+		regulator_disable(vbus);
+	}
+
+	return 0;
+}
+
+static void ssusb_mode_sw_work(struct work_struct *work)
+{
+	struct otg_switch_mtk *otg_sx =
+		container_of(work, struct otg_switch_mtk, dr_work);
+	struct ssusb_mtk *ssusb = otg_sx_to_ssusb(otg_sx);
+	struct mtu3 *mtu = ssusb->u3d;
+	enum usb_role desired_role = otg_sx->desired_role;
+	enum usb_role current_role;
+
+	current_role = ssusb->is_host ? USB_ROLE_HOST : USB_ROLE_DEVICE;
+
+	if (desired_role == USB_ROLE_NONE) {
+		/* the default mode is host as probe does */
+		desired_role = USB_ROLE_HOST;
+		if (otg_sx->default_role == USB_ROLE_DEVICE)
+			desired_role = USB_ROLE_DEVICE;
+	}
+
+	if (current_role == desired_role)
+		return;
+
+	dev_dbg(ssusb->dev, "set role : %s\n", usb_role_string(desired_role));
+	mtu3_dbg_trace(ssusb->dev, "set role : %s", usb_role_string(desired_role));
+	pm_runtime_get_sync(ssusb->dev);
+
+	switch (desired_role) {
+	case USB_ROLE_HOST:
+		ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
+		mtu3_stop(mtu);
+		switch_port_to_host(ssusb);
+		ssusb_set_vbus(otg_sx, 1);
+		ssusb->is_host = true;
+		break;
+	case USB_ROLE_DEVICE:
+		ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_DEVICE);
+		ssusb->is_host = false;
+		ssusb_set_vbus(otg_sx, 0);
+		switch_port_to_device(ssusb);
+		mtu3_start(mtu);
+		break;
+	case USB_ROLE_NONE:
+	default:
+		dev_err(ssusb->dev, "invalid role\n");
+	}
+	pm_runtime_put(ssusb->dev);
+}
+
+static void ssusb_set_mode(struct otg_switch_mtk *otg_sx, enum usb_role role)
+{
+	struct ssusb_mtk *ssusb = otg_sx_to_ssusb(otg_sx);
+
+	if (ssusb->dr_mode != USB_DR_MODE_OTG)
+		return;
+
+	otg_sx->desired_role = role;
+	queue_work(system_freezable_wq, &otg_sx->dr_work);
+}
+
+static int ssusb_id_notifier(struct notifier_block *nb,
+	unsigned long event, void *ptr)
+{
+	struct otg_switch_mtk *otg_sx =
+		container_of(nb, struct otg_switch_mtk, id_nb);
+
+	ssusb_set_mode(otg_sx, event ? USB_ROLE_HOST : USB_ROLE_DEVICE);
+
+	return NOTIFY_DONE;
+}
+
+static int ssusb_extcon_register(struct otg_switch_mtk *otg_sx)
+{
+	struct ssusb_mtk *ssusb = otg_sx_to_ssusb(otg_sx);
+	struct extcon_dev *edev = otg_sx->edev;
+	int ret;
+
+	/* extcon is optional */
+	if (!edev)
+		return 0;
+
+	otg_sx->id_nb.notifier_call = ssusb_id_notifier;
+	ret = devm_extcon_register_notifier(ssusb->dev, edev, EXTCON_USB_HOST,
+					&otg_sx->id_nb);
+	if (ret < 0) {
+		dev_err(ssusb->dev, "failed to register notifier for USB-HOST\n");
+		return ret;
+	}
+
+	ret = extcon_get_state(edev, EXTCON_USB_HOST);
+	dev_dbg(ssusb->dev, "EXTCON_USB_HOST: %d\n", ret);
+
+	/* default as host, switch to device mode if needed */
+	if (!ret)
+		ssusb_set_mode(otg_sx, USB_ROLE_DEVICE);
+
+	return 0;
+}
+
+/*
+ * We provide an interface via debugfs to switch between host and device modes
+ * depending on user input.
+ * This is useful in special cases, such as uses TYPE-A receptacle but also
+ * wants to support dual-role mode.
+ */
+void ssusb_mode_switch(struct ssusb_mtk *ssusb, int to_host)
+{
+	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
+
+	ssusb_set_mode(otg_sx, to_host ? USB_ROLE_HOST : USB_ROLE_DEVICE);
+}
+
+void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
+			  enum mtu3_dr_force_mode mode)
+{
+	u32 value;
+
+	value = mtu3_readl(ssusb->ippc_base, SSUSB_U2_CTRL(0));
+	switch (mode) {
+	case MTU3_DR_FORCE_DEVICE:
+		value |= SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG;
+		break;
+	case MTU3_DR_FORCE_HOST:
+		value |= SSUSB_U2_PORT_FORCE_IDDIG;
+		value &= ~SSUSB_U2_PORT_RG_IDDIG;
+		break;
+	case MTU3_DR_FORCE_NONE:
+		value &= ~(SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG);
+		break;
+	default:
+		return;
+	}
+	mtu3_writel(ssusb->ippc_base, SSUSB_U2_CTRL(0), value);
+}
+
+static int ssusb_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
+{
+	struct ssusb_mtk *ssusb = usb_role_switch_get_drvdata(sw);
+	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
+
+	ssusb_set_mode(otg_sx, role);
+
+	return 0;
+}
+
+static enum usb_role ssusb_role_sw_get(struct usb_role_switch *sw)
+{
+	struct ssusb_mtk *ssusb = usb_role_switch_get_drvdata(sw);
+
+	return ssusb->is_host ? USB_ROLE_HOST : USB_ROLE_DEVICE;
+}
+
+static int ssusb_role_sw_register(struct otg_switch_mtk *otg_sx)
+{
+	struct usb_role_switch_desc role_sx_desc = { 0 };
+	struct ssusb_mtk *ssusb = otg_sx_to_ssusb(otg_sx);
+	struct device *dev = ssusb->dev;
+	enum usb_dr_mode mode;
+
+	if (!otg_sx->role_sw_used)
+		return 0;
+
+	mode = usb_get_role_switch_default_mode(dev);
+	if (mode == USB_DR_MODE_PERIPHERAL)
+		otg_sx->default_role = USB_ROLE_DEVICE;
+	else
+		otg_sx->default_role = USB_ROLE_HOST;
+
+	role_sx_desc.set = ssusb_role_sw_set;
+	role_sx_desc.get = ssusb_role_sw_get;
+	role_sx_desc.fwnode = dev_fwnode(dev);
+	role_sx_desc.driver_data = ssusb;
+	otg_sx->role_sw = usb_role_switch_register(dev, &role_sx_desc);
+	if (IS_ERR(otg_sx->role_sw))
+		return PTR_ERR(otg_sx->role_sw);
+
+	ssusb_set_mode(otg_sx, otg_sx->default_role);
+
+	return 0;
+}
+
+int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
+{
+	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
+	int ret = 0;
+
+	INIT_WORK(&otg_sx->dr_work, ssusb_mode_sw_work);
+
+	if (otg_sx->manual_drd_enabled)
+		ssusb_dr_debugfs_init(ssusb);
+	else if (otg_sx->role_sw_used)
+		ret = ssusb_role_sw_register(otg_sx);
+	else
+		ret = ssusb_extcon_register(otg_sx);
+
+	return ret;
+}
+
+void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb)
+{
+	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
+
+	cancel_work_sync(&otg_sx->dr_work);
+	usb_role_switch_unregister(otg_sx->role_sw);
+}
diff --git a/drivers/usb/mtu3/mtu3_dr.h b/drivers/usb/mtu3/mtu3_dr.h
new file mode 100644
index 000000000..e325508bd
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_dr.h
@@ -0,0 +1,125 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * mtu3_dr.h - dual role switch and host glue layer header
+ *
+ * Copyright (C) 2016 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#ifndef _MTU3_DR_H_
+#define _MTU3_DR_H_
+
+#if IS_ENABLED(CONFIG_USB_MTU3_HOST) || IS_ENABLED(CONFIG_USB_MTU3_DUAL_ROLE)
+
+int ssusb_host_init(struct ssusb_mtk *ssusb, struct device_node *parent_dn);
+void ssusb_host_exit(struct ssusb_mtk *ssusb);
+int ssusb_wakeup_of_property_parse(struct ssusb_mtk *ssusb,
+				struct device_node *dn);
+int ssusb_host_resume(struct ssusb_mtk *ssusb, bool p0_skipped);
+int ssusb_host_suspend(struct ssusb_mtk *ssusb);
+void ssusb_wakeup_set(struct ssusb_mtk *ssusb, bool enable);
+
+#else
+
+static inline int ssusb_host_init(struct ssusb_mtk *ssusb,
+
+	struct device_node *parent_dn)
+{
+	return 0;
+}
+
+static inline void ssusb_host_exit(struct ssusb_mtk *ssusb)
+{}
+
+static inline int ssusb_wakeup_of_property_parse(
+	struct ssusb_mtk *ssusb, struct device_node *dn)
+{
+	return 0;
+}
+
+static inline int ssusb_host_resume(struct ssusb_mtk *ssusb, bool p0_skipped)
+{
+	return 0;
+}
+
+static inline int ssusb_host_suspend(struct ssusb_mtk *ssusb)
+{
+	return 0;
+}
+
+static inline void ssusb_wakeup_set(struct ssusb_mtk *ssusb, bool enable)
+{}
+
+#endif
+
+
+#if IS_ENABLED(CONFIG_USB_MTU3_GADGET) || IS_ENABLED(CONFIG_USB_MTU3_DUAL_ROLE)
+int ssusb_gadget_init(struct ssusb_mtk *ssusb);
+void ssusb_gadget_exit(struct ssusb_mtk *ssusb);
+int ssusb_gadget_suspend(struct ssusb_mtk *ssusb, pm_message_t msg);
+int ssusb_gadget_resume(struct ssusb_mtk *ssusb, pm_message_t msg);
+bool ssusb_gadget_ip_sleep_check(struct ssusb_mtk *ssusb);
+
+#else
+static inline int ssusb_gadget_init(struct ssusb_mtk *ssusb)
+{
+	return 0;
+}
+
+static inline void ssusb_gadget_exit(struct ssusb_mtk *ssusb)
+{}
+
+static inline int
+ssusb_gadget_suspend(struct ssusb_mtk *ssusb, pm_message_t msg)
+{
+	return 0;
+}
+
+static inline int
+ssusb_gadget_resume(struct ssusb_mtk *ssusb, pm_message_t msg)
+{
+	return 0;
+}
+
+static inline bool ssusb_gadget_ip_sleep_check(struct ssusb_mtk *ssusb)
+{
+	return true;
+}
+
+#endif
+
+
+#if IS_ENABLED(CONFIG_USB_MTU3_DUAL_ROLE)
+int ssusb_otg_switch_init(struct ssusb_mtk *ssusb);
+void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb);
+void ssusb_mode_switch(struct ssusb_mtk *ssusb, int to_host);
+int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on);
+void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
+			  enum mtu3_dr_force_mode mode);
+
+#else
+
+static inline int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
+{
+	return 0;
+}
+
+static inline void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb)
+{}
+
+static inline void ssusb_mode_switch(struct ssusb_mtk *ssusb, int to_host)
+{}
+
+static inline int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on)
+{
+	return 0;
+}
+
+static inline void
+ssusb_set_force_mode(struct ssusb_mtk *ssusb, enum mtu3_dr_force_mode mode)
+{}
+
+#endif
+
+#endif		/* _MTU3_DR_H_ */
diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
new file mode 100644
index 000000000..80236e7b0
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -0,0 +1,772 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * mtu3_gadget.c - MediaTek usb3 DRD peripheral support
+ *
+ * Copyright (C) 2016 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#include "mtu3.h"
+#include "mtu3_trace.h"
+
+void mtu3_req_complete(struct mtu3_ep *mep,
+		     struct usb_request *req, int status)
+__releases(mep->mtu->lock)
+__acquires(mep->mtu->lock)
+{
+	struct mtu3_request *mreq = to_mtu3_request(req);
+	struct mtu3 *mtu = mreq->mtu;
+
+	list_del(&mreq->list);
+	if (req->status == -EINPROGRESS)
+		req->status = status;
+
+	trace_mtu3_req_complete(mreq);
+	spin_unlock(&mtu->lock);
+
+	/* ep0 makes use of PIO, needn't unmap it */
+	if (mep->epnum)
+		usb_gadget_unmap_request(&mtu->g, req, mep->is_in);
+
+	dev_dbg(mtu->dev, "%s complete req: %p, sts %d, %d/%d\n",
+		mep->name, req, req->status, req->actual, req->length);
+
+	usb_gadget_giveback_request(&mep->ep, req);
+	spin_lock(&mtu->lock);
+}
+
+static void nuke(struct mtu3_ep *mep, const int status)
+{
+	struct mtu3_request *mreq = NULL;
+
+	if (list_empty(&mep->req_list))
+		return;
+
+	dev_dbg(mep->mtu->dev, "abort %s's req: sts %d\n", mep->name, status);
+
+	/* exclude EP0 */
+	if (mep->epnum)
+		mtu3_qmu_flush(mep);
+
+	while (!list_empty(&mep->req_list)) {
+		mreq = list_first_entry(&mep->req_list,
+					struct mtu3_request, list);
+		mtu3_req_complete(mep, &mreq->request, status);
+	}
+}
+
+static int mtu3_ep_enable(struct mtu3_ep *mep)
+{
+	const struct usb_endpoint_descriptor *desc;
+	const struct usb_ss_ep_comp_descriptor *comp_desc;
+	struct mtu3 *mtu = mep->mtu;
+	u32 interval = 0;
+	u32 mult = 0;
+	u32 burst = 0;
+	int ret;
+
+	desc = mep->desc;
+	comp_desc = mep->comp_desc;
+	mep->type = usb_endpoint_type(desc);
+	mep->maxp = usb_endpoint_maxp(desc);
+
+	switch (mtu->g.speed) {
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+		if (usb_endpoint_xfer_int(desc) ||
+				usb_endpoint_xfer_isoc(desc)) {
+			interval = desc->bInterval;
+			interval = clamp_val(interval, 1, 16);
+			if (usb_endpoint_xfer_isoc(desc) && comp_desc)
+				mult = comp_desc->bmAttributes;
+		}
+		if (comp_desc)
+			burst = comp_desc->bMaxBurst;
+
+		break;
+	case USB_SPEED_HIGH:
+		if (usb_endpoint_xfer_isoc(desc) ||
+				usb_endpoint_xfer_int(desc)) {
+			interval = desc->bInterval;
+			interval = clamp_val(interval, 1, 16);
+			mult = usb_endpoint_maxp_mult(desc) - 1;
+		}
+		break;
+	case USB_SPEED_FULL:
+		if (usb_endpoint_xfer_isoc(desc))
+			interval = clamp_val(desc->bInterval, 1, 16);
+		else if (usb_endpoint_xfer_int(desc))
+			interval = clamp_val(desc->bInterval, 1, 255);
+
+		break;
+	default:
+		break; /*others are ignored */
+	}
+
+	dev_dbg(mtu->dev, "%s maxp:%d, interval:%d, burst:%d, mult:%d\n",
+		__func__, mep->maxp, interval, burst, mult);
+
+	mep->ep.maxpacket = mep->maxp;
+	mep->ep.desc = desc;
+	mep->ep.comp_desc = comp_desc;
+
+	/* slot mainly affects bulk/isoc transfer, so ignore int */
+	mep->slot = usb_endpoint_xfer_int(desc) ? 0 : mtu->slot;
+
+	ret = mtu3_config_ep(mtu, mep, interval, burst, mult);
+	if (ret < 0)
+		return ret;
+
+	ret = mtu3_gpd_ring_alloc(mep);
+	if (ret < 0) {
+		mtu3_deconfig_ep(mtu, mep);
+		return ret;
+	}
+
+	mtu3_qmu_start(mep);
+
+	return 0;
+}
+
+static int mtu3_ep_disable(struct mtu3_ep *mep)
+{
+	struct mtu3 *mtu = mep->mtu;
+
+	mtu3_qmu_stop(mep);
+
+	/* abort all pending requests */
+	nuke(mep, -ESHUTDOWN);
+	mtu3_deconfig_ep(mtu, mep);
+	mtu3_gpd_ring_free(mep);
+
+	mep->desc = NULL;
+	mep->ep.desc = NULL;
+	mep->comp_desc = NULL;
+	mep->type = 0;
+	mep->flags = 0;
+
+	return 0;
+}
+
+static int mtu3_gadget_ep_enable(struct usb_ep *ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct mtu3_ep *mep;
+	struct mtu3 *mtu;
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
+		pr_debug("%s invalid parameters\n", __func__);
+		return -EINVAL;
+	}
+
+	if (!desc->wMaxPacketSize) {
+		pr_debug("%s missing wMaxPacketSize\n", __func__);
+		return -EINVAL;
+	}
+	mep = to_mtu3_ep(ep);
+	mtu = mep->mtu;
+
+	/* check ep number and direction against endpoint */
+	if (usb_endpoint_num(desc) != mep->epnum)
+		return -EINVAL;
+
+	if (!!usb_endpoint_dir_in(desc) ^ !!mep->is_in)
+		return -EINVAL;
+
+	dev_dbg(mtu->dev, "%s %s\n", __func__, ep->name);
+
+	if (mep->flags & MTU3_EP_ENABLED) {
+		dev_WARN_ONCE(mtu->dev, true, "%s is already enabled\n",
+				mep->name);
+		return 0;
+	}
+
+	spin_lock_irqsave(&mtu->lock, flags);
+	mep->desc = desc;
+	mep->comp_desc = ep->comp_desc;
+
+	ret = mtu3_ep_enable(mep);
+	if (ret)
+		goto error;
+
+	mep->flags = MTU3_EP_ENABLED;
+	mtu->active_ep++;
+
+error:
+	spin_unlock_irqrestore(&mtu->lock, flags);
+
+	dev_dbg(mtu->dev, "%s active_ep=%d\n", __func__, mtu->active_ep);
+	trace_mtu3_gadget_ep_enable(mep);
+
+	return ret;
+}
+
+static int mtu3_gadget_ep_disable(struct usb_ep *ep)
+{
+	struct mtu3_ep *mep = to_mtu3_ep(ep);
+	struct mtu3 *mtu = mep->mtu;
+	unsigned long flags;
+
+	dev_dbg(mtu->dev, "%s %s\n", __func__, mep->name);
+	trace_mtu3_gadget_ep_disable(mep);
+
+	if (!(mep->flags & MTU3_EP_ENABLED)) {
+		dev_warn(mtu->dev, "%s is already disabled\n", mep->name);
+		return 0;
+	}
+
+	spin_lock_irqsave(&mtu->lock, flags);
+	mtu3_ep_disable(mep);
+	mep->flags = 0;
+	mtu->active_ep--;
+	spin_unlock_irqrestore(&(mtu->lock), flags);
+
+	dev_dbg(mtu->dev, "%s active_ep=%d, mtu3 is_active=%d\n",
+		__func__, mtu->active_ep, mtu->is_active);
+
+	return 0;
+}
+
+struct usb_request *mtu3_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
+{
+	struct mtu3_ep *mep = to_mtu3_ep(ep);
+	struct mtu3_request *mreq;
+
+	mreq = kzalloc(sizeof(*mreq), gfp_flags);
+	if (!mreq)
+		return NULL;
+
+	mreq->request.dma = DMA_ADDR_INVALID;
+	mreq->epnum = mep->epnum;
+	mreq->mep = mep;
+	INIT_LIST_HEAD(&mreq->list);
+	trace_mtu3_alloc_request(mreq);
+
+	return &mreq->request;
+}
+
+void mtu3_free_request(struct usb_ep *ep, struct usb_request *req)
+{
+	struct mtu3_request *mreq = to_mtu3_request(req);
+
+	trace_mtu3_free_request(mreq);
+	kfree(mreq);
+}
+
+static int mtu3_gadget_queue(struct usb_ep *ep,
+		struct usb_request *req, gfp_t gfp_flags)
+{
+	struct mtu3_ep *mep = to_mtu3_ep(ep);
+	struct mtu3_request *mreq = to_mtu3_request(req);
+	struct mtu3 *mtu = mep->mtu;
+	unsigned long flags;
+	int ret = 0;
+
+	if (!req->buf)
+		return -ENODATA;
+
+	if (mreq->mep != mep)
+		return -EINVAL;
+
+	dev_dbg(mtu->dev, "%s %s EP%d(%s), req=%p, maxp=%d, len#%d\n",
+		__func__, mep->is_in ? "TX" : "RX", mreq->epnum, ep->name,
+		mreq, ep->maxpacket, mreq->request.length);
+
+	if (req->length > GPD_BUF_SIZE ||
+	    (mtu->gen2cp && req->length > GPD_BUF_SIZE_EL)) {
+		dev_warn(mtu->dev,
+			"req length > supported MAX:%d requested:%d\n",
+			mtu->gen2cp ? GPD_BUF_SIZE_EL : GPD_BUF_SIZE,
+			req->length);
+		return -EOPNOTSUPP;
+	}
+
+	/* don't queue if the ep is down */
+	if (!mep->desc) {
+		dev_dbg(mtu->dev, "req=%p queued to %s while it's disabled\n",
+			req, ep->name);
+		return -ESHUTDOWN;
+	}
+
+	mreq->mtu = mtu;
+	mreq->request.actual = 0;
+	mreq->request.status = -EINPROGRESS;
+
+	ret = usb_gadget_map_request(&mtu->g, req, mep->is_in);
+	if (ret) {
+		dev_err(mtu->dev, "dma mapping failed\n");
+		return ret;
+	}
+
+	spin_lock_irqsave(&mtu->lock, flags);
+
+	if (mtu3_prepare_transfer(mep)) {
+		ret = -EAGAIN;
+		goto error;
+	}
+
+	list_add_tail(&mreq->list, &mep->req_list);
+	mtu3_insert_gpd(mep, mreq);
+	mtu3_qmu_resume(mep);
+
+error:
+	spin_unlock_irqrestore(&mtu->lock, flags);
+	trace_mtu3_gadget_queue(mreq);
+
+	return ret;
+}
+
+static int mtu3_gadget_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	struct mtu3_ep *mep = to_mtu3_ep(ep);
+	struct mtu3_request *mreq = to_mtu3_request(req);
+	struct mtu3_request *r;
+	struct mtu3 *mtu = mep->mtu;
+	unsigned long flags;
+	int ret = 0;
+
+	if (mreq->mep != mep)
+		return -EINVAL;
+
+	dev_dbg(mtu->dev, "%s : req=%p\n", __func__, req);
+	trace_mtu3_gadget_dequeue(mreq);
+
+	spin_lock_irqsave(&mtu->lock, flags);
+
+	list_for_each_entry(r, &mep->req_list, list) {
+		if (r == mreq)
+			break;
+	}
+	if (r != mreq) {
+		dev_dbg(mtu->dev, "req=%p not queued to %s\n", req, ep->name);
+		ret = -EINVAL;
+		goto done;
+	}
+
+	mtu3_qmu_flush(mep);  /* REVISIT: set BPS ?? */
+	mtu3_req_complete(mep, req, -ECONNRESET);
+	mtu3_qmu_start(mep);
+
+done:
+	spin_unlock_irqrestore(&mtu->lock, flags);
+
+	return ret;
+}
+
+/*
+ * Set or clear the halt bit of an EP.
+ * A halted EP won't TX/RX any data but will queue requests.
+ */
+static int mtu3_gadget_ep_set_halt(struct usb_ep *ep, int value)
+{
+	struct mtu3_ep *mep = to_mtu3_ep(ep);
+	struct mtu3 *mtu = mep->mtu;
+	struct mtu3_request *mreq;
+	unsigned long flags;
+	int ret = 0;
+
+	dev_dbg(mtu->dev, "%s : %s...", __func__, ep->name);
+
+	spin_lock_irqsave(&mtu->lock, flags);
+
+	if (mep->type == USB_ENDPOINT_XFER_ISOC) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	mreq = next_request(mep);
+	if (value) {
+		/*
+		 * If there is not request for TX-EP, QMU will not transfer
+		 * data to TX-FIFO, so no need check whether TX-FIFO
+		 * holds bytes or not here
+		 */
+		if (mreq) {
+			dev_dbg(mtu->dev, "req in progress, cannot halt %s\n",
+				ep->name);
+			ret = -EAGAIN;
+			goto done;
+		}
+	} else {
+		mep->flags &= ~MTU3_EP_WEDGE;
+	}
+
+	dev_dbg(mtu->dev, "%s %s stall\n", ep->name, value ? "set" : "clear");
+
+	mtu3_ep_stall_set(mep, value);
+
+done:
+	spin_unlock_irqrestore(&mtu->lock, flags);
+	trace_mtu3_gadget_ep_set_halt(mep);
+
+	return ret;
+}
+
+/* Sets the halt feature with the clear requests ignored */
+static int mtu3_gadget_ep_set_wedge(struct usb_ep *ep)
+{
+	struct mtu3_ep *mep = to_mtu3_ep(ep);
+
+	mep->flags |= MTU3_EP_WEDGE;
+
+	return usb_ep_set_halt(ep);
+}
+
+static const struct usb_ep_ops mtu3_ep_ops = {
+	.enable = mtu3_gadget_ep_enable,
+	.disable = mtu3_gadget_ep_disable,
+	.alloc_request = mtu3_alloc_request,
+	.free_request = mtu3_free_request,
+	.queue = mtu3_gadget_queue,
+	.dequeue = mtu3_gadget_dequeue,
+	.set_halt = mtu3_gadget_ep_set_halt,
+	.set_wedge = mtu3_gadget_ep_set_wedge,
+};
+
+static int mtu3_gadget_get_frame(struct usb_gadget *gadget)
+{
+	struct mtu3 *mtu = gadget_to_mtu3(gadget);
+
+	return (int)mtu3_readl(mtu->mac_base, U3D_USB20_FRAME_NUM);
+}
+
+static void function_wake_notif(struct mtu3 *mtu, u8 intf)
+{
+	mtu3_writel(mtu->mac_base, U3D_DEV_NOTIF_0,
+		    TYPE_FUNCTION_WAKE | DEV_NOTIF_VAL_FW(intf));
+	mtu3_setbits(mtu->mac_base, U3D_DEV_NOTIF_0, SEND_DEV_NOTIF);
+}
+
+static int mtu3_gadget_wakeup(struct usb_gadget *gadget)
+{
+	struct mtu3 *mtu = gadget_to_mtu3(gadget);
+	unsigned long flags;
+
+	dev_dbg(mtu->dev, "%s\n", __func__);
+
+	/* remote wakeup feature is not enabled by host */
+	if (!mtu->may_wakeup)
+		return  -EOPNOTSUPP;
+
+	spin_lock_irqsave(&mtu->lock, flags);
+	if (mtu->g.speed >= USB_SPEED_SUPER) {
+		/*
+		 * class driver may do function wakeup even UFP is in U0,
+		 * and UX_EXIT only takes effect in U1/U2/U3;
+		 */
+		mtu3_setbits(mtu->mac_base, U3D_LINK_POWER_CONTROL, UX_EXIT);
+		/*
+		 * Assume there's only one function on the composite device
+		 * and enable remote wake for the first interface.
+		 * FIXME if the IAD (interface association descriptor) shows
+		 * there is more than one function.
+		 */
+		function_wake_notif(mtu, 0);
+	} else {
+		mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);
+		spin_unlock_irqrestore(&mtu->lock, flags);
+		usleep_range(10000, 11000);
+		spin_lock_irqsave(&mtu->lock, flags);
+		mtu3_clrbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);
+	}
+	spin_unlock_irqrestore(&mtu->lock, flags);
+	return 0;
+}
+
+static int mtu3_gadget_set_self_powered(struct usb_gadget *gadget,
+		int is_selfpowered)
+{
+	struct mtu3 *mtu = gadget_to_mtu3(gadget);
+
+	mtu->is_self_powered = !!is_selfpowered;
+	return 0;
+}
+
+static int mtu3_gadget_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct mtu3 *mtu = gadget_to_mtu3(gadget);
+	unsigned long flags;
+
+	dev_dbg(mtu->dev, "%s (%s) for %sactive device\n", __func__,
+		is_on ? "on" : "off", mtu->is_active ? "" : "in");
+
+	pm_runtime_get_sync(mtu->dev);
+
+	/* we'd rather not pullup unless the device is active. */
+	spin_lock_irqsave(&mtu->lock, flags);
+
+	is_on = !!is_on;
+	if (!mtu->is_active) {
+		/* save it for mtu3_start() to process the request */
+		mtu->softconnect = is_on;
+	} else if (is_on != mtu->softconnect) {
+		mtu->softconnect = is_on;
+		mtu3_dev_on_off(mtu, is_on);
+	}
+
+	spin_unlock_irqrestore(&mtu->lock, flags);
+	pm_runtime_put(mtu->dev);
+
+	return 0;
+}
+
+static int mtu3_gadget_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct mtu3 *mtu = gadget_to_mtu3(gadget);
+	unsigned long flags;
+
+	if (mtu->gadget_driver) {
+		dev_err(mtu->dev, "%s is already bound to %s\n",
+			mtu->g.name, mtu->gadget_driver->driver.name);
+		return -EBUSY;
+	}
+
+	dev_dbg(mtu->dev, "bind driver %s\n", driver->function);
+	pm_runtime_get_sync(mtu->dev);
+
+	spin_lock_irqsave(&mtu->lock, flags);
+
+	mtu->softconnect = 0;
+	mtu->gadget_driver = driver;
+
+	if (mtu->ssusb->dr_mode == USB_DR_MODE_PERIPHERAL)
+		mtu3_start(mtu);
+
+	spin_unlock_irqrestore(&mtu->lock, flags);
+	pm_runtime_put(mtu->dev);
+
+	return 0;
+}
+
+static void stop_activity(struct mtu3 *mtu)
+{
+	struct usb_gadget_driver *driver = mtu->gadget_driver;
+	int i;
+
+	/* don't disconnect if it's not connected */
+	if (mtu->g.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+	else
+		mtu->g.speed = USB_SPEED_UNKNOWN;
+
+	/* deactivate the hardware */
+	if (mtu->softconnect) {
+		mtu->softconnect = 0;
+		mtu3_dev_on_off(mtu, 0);
+	}
+
+	/*
+	 * killing any outstanding requests will quiesce the driver;
+	 * then report disconnect
+	 */
+	nuke(mtu->ep0, -ESHUTDOWN);
+	for (i = 1; i < mtu->num_eps; i++) {
+		nuke(mtu->in_eps + i, -ESHUTDOWN);
+		nuke(mtu->out_eps + i, -ESHUTDOWN);
+	}
+
+	if (driver) {
+		spin_unlock(&mtu->lock);
+		driver->disconnect(&mtu->g);
+		spin_lock(&mtu->lock);
+	}
+}
+
+static int mtu3_gadget_stop(struct usb_gadget *g)
+{
+	struct mtu3 *mtu = gadget_to_mtu3(g);
+	unsigned long flags;
+
+	dev_dbg(mtu->dev, "%s\n", __func__);
+
+	spin_lock_irqsave(&mtu->lock, flags);
+
+	stop_activity(mtu);
+	mtu->gadget_driver = NULL;
+
+	if (mtu->ssusb->dr_mode == USB_DR_MODE_PERIPHERAL)
+		mtu3_stop(mtu);
+
+	spin_unlock_irqrestore(&mtu->lock, flags);
+
+	synchronize_irq(mtu->irq);
+	return 0;
+}
+
+static void
+mtu3_gadget_set_speed(struct usb_gadget *g, enum usb_device_speed speed)
+{
+	struct mtu3 *mtu = gadget_to_mtu3(g);
+	unsigned long flags;
+
+	dev_dbg(mtu->dev, "%s %s\n", __func__, usb_speed_string(speed));
+
+	spin_lock_irqsave(&mtu->lock, flags);
+	mtu->speed = speed;
+	spin_unlock_irqrestore(&mtu->lock, flags);
+}
+
+static void mtu3_gadget_async_callbacks(struct usb_gadget *g, bool enable)
+{
+	struct mtu3 *mtu = gadget_to_mtu3(g);
+	unsigned long flags;
+
+	dev_dbg(mtu->dev, "%s %s\n", __func__, enable ? "en" : "dis");
+
+	spin_lock_irqsave(&mtu->lock, flags);
+	mtu->async_callbacks = enable;
+	spin_unlock_irqrestore(&mtu->lock, flags);
+}
+
+static const struct usb_gadget_ops mtu3_gadget_ops = {
+	.get_frame = mtu3_gadget_get_frame,
+	.wakeup = mtu3_gadget_wakeup,
+	.set_selfpowered = mtu3_gadget_set_self_powered,
+	.pullup = mtu3_gadget_pullup,
+	.udc_start = mtu3_gadget_start,
+	.udc_stop = mtu3_gadget_stop,
+	.udc_set_speed = mtu3_gadget_set_speed,
+	.udc_async_callbacks = mtu3_gadget_async_callbacks,
+};
+
+static void mtu3_state_reset(struct mtu3 *mtu)
+{
+	mtu->address = 0;
+	mtu->ep0_state = MU3D_EP0_STATE_SETUP;
+	mtu->may_wakeup = 0;
+	mtu->u1_enable = 0;
+	mtu->u2_enable = 0;
+	mtu->delayed_status = false;
+	mtu->test_mode = false;
+}
+
+static void init_hw_ep(struct mtu3 *mtu, struct mtu3_ep *mep,
+		u32 epnum, u32 is_in)
+{
+	mep->epnum = epnum;
+	mep->mtu = mtu;
+	mep->is_in = is_in;
+
+	INIT_LIST_HEAD(&mep->req_list);
+
+	sprintf(mep->name, "ep%d%s", epnum,
+		!epnum ? "" : (is_in ? "in" : "out"));
+
+	mep->ep.name = mep->name;
+	INIT_LIST_HEAD(&mep->ep.ep_list);
+
+	/* initialize maxpacket as SS */
+	if (!epnum) {
+		usb_ep_set_maxpacket_limit(&mep->ep, 512);
+		mep->ep.caps.type_control = true;
+		mep->ep.ops = &mtu3_ep0_ops;
+		mtu->g.ep0 = &mep->ep;
+	} else {
+		usb_ep_set_maxpacket_limit(&mep->ep, 1024);
+		mep->ep.caps.type_iso = true;
+		mep->ep.caps.type_bulk = true;
+		mep->ep.caps.type_int = true;
+		mep->ep.ops = &mtu3_ep_ops;
+		list_add_tail(&mep->ep.ep_list, &mtu->g.ep_list);
+	}
+
+	dev_dbg(mtu->dev, "%s, name=%s, maxp=%d\n", __func__, mep->ep.name,
+		 mep->ep.maxpacket);
+
+	if (!epnum) {
+		mep->ep.caps.dir_in = true;
+		mep->ep.caps.dir_out = true;
+	} else if (is_in) {
+		mep->ep.caps.dir_in = true;
+	} else {
+		mep->ep.caps.dir_out = true;
+	}
+}
+
+static void mtu3_gadget_init_eps(struct mtu3 *mtu)
+{
+	u8 epnum;
+
+	/* initialize endpoint list just once */
+	INIT_LIST_HEAD(&(mtu->g.ep_list));
+
+	dev_dbg(mtu->dev, "%s num_eps(1 for a pair of tx&rx ep)=%d\n",
+		__func__, mtu->num_eps);
+
+	init_hw_ep(mtu, mtu->ep0, 0, 0);
+	for (epnum = 1; epnum < mtu->num_eps; epnum++) {
+		init_hw_ep(mtu, mtu->in_eps + epnum, epnum, 1);
+		init_hw_ep(mtu, mtu->out_eps + epnum, epnum, 0);
+	}
+}
+
+int mtu3_gadget_setup(struct mtu3 *mtu)
+{
+	mtu->g.ops = &mtu3_gadget_ops;
+	mtu->g.max_speed = mtu->max_speed;
+	mtu->g.speed = USB_SPEED_UNKNOWN;
+	mtu->g.sg_supported = 0;
+	mtu->g.name = MTU3_DRIVER_NAME;
+	mtu->g.irq = mtu->irq;
+	mtu->is_active = 0;
+	mtu->delayed_status = false;
+
+	mtu3_gadget_init_eps(mtu);
+
+	return usb_add_gadget_udc(mtu->dev, &mtu->g);
+}
+
+void mtu3_gadget_cleanup(struct mtu3 *mtu)
+{
+	usb_del_gadget_udc(&mtu->g);
+}
+
+void mtu3_gadget_resume(struct mtu3 *mtu)
+{
+	dev_dbg(mtu->dev, "gadget RESUME\n");
+	if (mtu->async_callbacks && mtu->gadget_driver && mtu->gadget_driver->resume) {
+		spin_unlock(&mtu->lock);
+		mtu->gadget_driver->resume(&mtu->g);
+		spin_lock(&mtu->lock);
+	}
+}
+
+/* called when SOF packets stop for 3+ msec or enters U3 */
+void mtu3_gadget_suspend(struct mtu3 *mtu)
+{
+	dev_dbg(mtu->dev, "gadget SUSPEND\n");
+	if (mtu->async_callbacks && mtu->gadget_driver && mtu->gadget_driver->suspend) {
+		spin_unlock(&mtu->lock);
+		mtu->gadget_driver->suspend(&mtu->g);
+		spin_lock(&mtu->lock);
+	}
+}
+
+/* called when VBUS drops below session threshold, and in other cases */
+void mtu3_gadget_disconnect(struct mtu3 *mtu)
+{
+	dev_dbg(mtu->dev, "gadget DISCONNECT\n");
+	if (mtu->async_callbacks && mtu->gadget_driver && mtu->gadget_driver->disconnect) {
+		spin_unlock(&mtu->lock);
+		mtu->gadget_driver->disconnect(&mtu->g);
+		spin_lock(&mtu->lock);
+	}
+
+	mtu3_state_reset(mtu);
+	usb_gadget_set_state(&mtu->g, USB_STATE_NOTATTACHED);
+}
+
+void mtu3_gadget_reset(struct mtu3 *mtu)
+{
+	dev_dbg(mtu->dev, "gadget RESET\n");
+
+	/* report disconnect, if we didn't flush EP state */
+	if (mtu->g.speed != USB_SPEED_UNKNOWN)
+		mtu3_gadget_disconnect(mtu);
+	else
+		mtu3_state_reset(mtu);
+}
diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c
new file mode 100644
index 000000000..e4fd1bb14
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c
@@ -0,0 +1,916 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * mtu3_gadget_ep0.c - MediaTek USB3 DRD peripheral driver ep0 handling
+ *
+ * Copyright (c) 2016 MediaTek Inc.
+ *
+ * Author:  Chunfeng.Yun <chunfeng.yun@mediatek.com>
+ */
+
+#include <linux/iopoll.h>
+#include <linux/usb/composite.h>
+
+#include "mtu3.h"
+#include "mtu3_debug.h"
+#include "mtu3_trace.h"
+
+/* ep0 is always mtu3->in_eps[0] */
+#define	next_ep0_request(mtu)	next_request((mtu)->ep0)
+
+/* for high speed test mode; see USB 2.0 spec 7.1.20 */
+static const u8 mtu3_test_packet[53] = {
+	/* implicit SYNC then DATA0 to start */
+
+	/* JKJKJKJK x9 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* JJKKJJKK x8 */
+	0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+	/* JJJJKKKK x8 */
+	0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee,
+	/* JJJJJJJKKKKKKK x8 */
+	0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	/* JJJJJJJK x8 */
+	0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd,
+	/* JKKKKKKK x10, JK */
+	0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e,
+	/* implicit CRC16 then EOP to end */
+};
+
+static char *decode_ep0_state(struct mtu3 *mtu)
+{
+	switch (mtu->ep0_state) {
+	case MU3D_EP0_STATE_SETUP:
+		return "SETUP";
+	case MU3D_EP0_STATE_TX:
+		return "IN";
+	case MU3D_EP0_STATE_RX:
+		return "OUT";
+	case MU3D_EP0_STATE_TX_END:
+		return "TX-END";
+	case MU3D_EP0_STATE_STALL:
+		return "STALL";
+	default:
+		return "??";
+	}
+}
+
+static void ep0_req_giveback(struct mtu3 *mtu, struct usb_request *req)
+{
+	mtu3_req_complete(mtu->ep0, req, 0);
+}
+
+static int
+forward_to_driver(struct mtu3 *mtu, const struct usb_ctrlrequest *setup)
+__releases(mtu->lock)
+__acquires(mtu->lock)
+{
+	int ret;
+
+	if (!mtu->gadget_driver || !mtu->async_callbacks)
+		return -EOPNOTSUPP;
+
+	spin_unlock(&mtu->lock);
+	ret = mtu->gadget_driver->setup(&mtu->g, setup);
+	spin_lock(&mtu->lock);
+
+	dev_dbg(mtu->dev, "%s ret %d\n", __func__, ret);
+	return ret;
+}
+
+static void ep0_write_fifo(struct mtu3_ep *mep, const u8 *src, u16 len)
+{
+	void __iomem *fifo = mep->mtu->mac_base + U3D_FIFO0;
+	u16 index = 0;
+
+	dev_dbg(mep->mtu->dev, "%s: ep%din, len=%d, buf=%p\n",
+		__func__, mep->epnum, len, src);
+
+	if (len >= 4) {
+		iowrite32_rep(fifo, src, len >> 2);
+		index = len & ~0x03;
+	}
+	if (len & 0x02) {
+		writew(*(u16 *)&src[index], fifo);
+		index += 2;
+	}
+	if (len & 0x01)
+		writeb(src[index], fifo);
+}
+
+static void ep0_read_fifo(struct mtu3_ep *mep, u8 *dst, u16 len)
+{
+	void __iomem *fifo = mep->mtu->mac_base + U3D_FIFO0;
+	u32 value;
+	u16 index = 0;
+
+	dev_dbg(mep->mtu->dev, "%s: ep%dout len=%d buf=%p\n",
+		 __func__, mep->epnum, len, dst);
+
+	if (len >= 4) {
+		ioread32_rep(fifo, dst, len >> 2);
+		index = len & ~0x03;
+	}
+	if (len & 0x3) {
+		value = readl(fifo);
+		memcpy(&dst[index], &value, len & 0x3);
+	}
+
+}
+
+static void ep0_load_test_packet(struct mtu3 *mtu)
+{
+	/*
+	 * because the length of test packet is less than max packet of HS ep0,
+	 * write it into fifo directly.
+	 */
+	ep0_write_fifo(mtu->ep0, mtu3_test_packet, sizeof(mtu3_test_packet));
+}
+
+/*
+ * A. send STALL for setup transfer without data stage:
+ *		set SENDSTALL and SETUPPKTRDY at the same time;
+ * B. send STALL for other cases:
+ *		set SENDSTALL only.
+ */
+static void ep0_stall_set(struct mtu3_ep *mep0, bool set, u32 pktrdy)
+{
+	struct mtu3 *mtu = mep0->mtu;
+	void __iomem *mbase = mtu->mac_base;
+	u32 csr;
+
+	/* EP0_SENTSTALL is W1C */
+	csr = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS;
+	if (set)
+		csr |= EP0_SENDSTALL | pktrdy;
+	else
+		csr = (csr & ~EP0_SENDSTALL) | EP0_SENTSTALL;
+	mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr);
+
+	mtu->delayed_status = false;
+	mtu->ep0_state = MU3D_EP0_STATE_SETUP;
+
+	dev_dbg(mtu->dev, "ep0: %s STALL, ep0_state: %s\n",
+		set ? "SEND" : "CLEAR", decode_ep0_state(mtu));
+}
+
+static void ep0_do_status_stage(struct mtu3 *mtu)
+{
+	void __iomem *mbase = mtu->mac_base;
+	u32 value;
+
+	value = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS;
+	mtu3_writel(mbase, U3D_EP0CSR, value | EP0_SETUPPKTRDY | EP0_DATAEND);
+}
+
+static int ep0_queue(struct mtu3_ep *mep0, struct mtu3_request *mreq);
+
+static void ep0_dummy_complete(struct usb_ep *ep, struct usb_request *req)
+{}
+
+static void ep0_set_sel_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct mtu3_request *mreq;
+	struct mtu3 *mtu;
+	struct usb_set_sel_req sel;
+
+	memcpy(&sel, req->buf, sizeof(sel));
+
+	mreq = to_mtu3_request(req);
+	mtu = mreq->mtu;
+	dev_dbg(mtu->dev, "u1sel:%d, u1pel:%d, u2sel:%d, u2pel:%d\n",
+		sel.u1_sel, sel.u1_pel, sel.u2_sel, sel.u2_pel);
+}
+
+/* queue data stage to handle 6 byte SET_SEL request */
+static int ep0_set_sel(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
+{
+	int ret;
+	u16 length = le16_to_cpu(setup->wLength);
+
+	if (unlikely(length != 6)) {
+		dev_err(mtu->dev, "%s wrong wLength:%d\n",
+			__func__, length);
+		return -EINVAL;
+	}
+
+	mtu->ep0_req.mep = mtu->ep0;
+	mtu->ep0_req.request.length = 6;
+	mtu->ep0_req.request.buf = mtu->setup_buf;
+	mtu->ep0_req.request.complete = ep0_set_sel_complete;
+	ret = ep0_queue(mtu->ep0, &mtu->ep0_req);
+
+	return ret < 0 ? ret : 1;
+}
+
+static int
+ep0_get_status(struct mtu3 *mtu, const struct usb_ctrlrequest *setup)
+{
+	struct mtu3_ep *mep = NULL;
+	int handled = 1;
+	u8 result[2] = {0, 0};
+	u8 epnum = 0;
+	int is_in;
+
+	switch (setup->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		result[0] = mtu->is_self_powered << USB_DEVICE_SELF_POWERED;
+		result[0] |= mtu->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+
+		if (mtu->g.speed >= USB_SPEED_SUPER) {
+			result[0] |= mtu->u1_enable << USB_DEV_STAT_U1_ENABLED;
+			result[0] |= mtu->u2_enable << USB_DEV_STAT_U2_ENABLED;
+		}
+
+		dev_dbg(mtu->dev, "%s result=%x, U1=%x, U2=%x\n", __func__,
+			result[0], mtu->u1_enable, mtu->u2_enable);
+
+		break;
+	case USB_RECIP_INTERFACE:
+		/* status of function remote wakeup, forward request */
+		handled = 0;
+		break;
+	case USB_RECIP_ENDPOINT:
+		epnum = (u8) le16_to_cpu(setup->wIndex);
+		is_in = epnum & USB_DIR_IN;
+		epnum &= USB_ENDPOINT_NUMBER_MASK;
+
+		if (epnum >= mtu->num_eps) {
+			handled = -EINVAL;
+			break;
+		}
+		if (!epnum)
+			break;
+
+		mep = (is_in ? mtu->in_eps : mtu->out_eps) + epnum;
+		if (!mep->desc) {
+			handled = -EINVAL;
+			break;
+		}
+		if (mep->flags & MTU3_EP_STALL)
+			result[0] |= 1 << USB_ENDPOINT_HALT;
+
+		break;
+	default:
+		/* class, vendor, etc ... delegate */
+		handled = 0;
+		break;
+	}
+
+	if (handled > 0) {
+		int ret;
+
+		/* prepare a data stage for GET_STATUS */
+		dev_dbg(mtu->dev, "get_status=%x\n", *(u16 *)result);
+		memcpy(mtu->setup_buf, result, sizeof(result));
+		mtu->ep0_req.mep = mtu->ep0;
+		mtu->ep0_req.request.length = 2;
+		mtu->ep0_req.request.buf = &mtu->setup_buf;
+		mtu->ep0_req.request.complete = ep0_dummy_complete;
+		ret = ep0_queue(mtu->ep0, &mtu->ep0_req);
+		if (ret < 0)
+			handled = ret;
+	}
+	return handled;
+}
+
+static int handle_test_mode(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
+{
+	void __iomem *mbase = mtu->mac_base;
+	int handled = 1;
+	u32 value;
+
+	switch (le16_to_cpu(setup->wIndex) >> 8) {
+	case USB_TEST_J:
+		dev_dbg(mtu->dev, "USB_TEST_J\n");
+		mtu->test_mode_nr = TEST_J_MODE;
+		break;
+	case USB_TEST_K:
+		dev_dbg(mtu->dev, "USB_TEST_K\n");
+		mtu->test_mode_nr = TEST_K_MODE;
+		break;
+	case USB_TEST_SE0_NAK:
+		dev_dbg(mtu->dev, "USB_TEST_SE0_NAK\n");
+		mtu->test_mode_nr = TEST_SE0_NAK_MODE;
+		break;
+	case USB_TEST_PACKET:
+		dev_dbg(mtu->dev, "USB_TEST_PACKET\n");
+		mtu->test_mode_nr = TEST_PACKET_MODE;
+		break;
+	default:
+		handled = -EINVAL;
+		goto out;
+	}
+
+	mtu->test_mode = true;
+
+	/* no TX completion interrupt, and need restart platform after test */
+	if (mtu->test_mode_nr == TEST_PACKET_MODE)
+		ep0_load_test_packet(mtu);
+
+	/* send status before entering test mode. */
+	ep0_do_status_stage(mtu);
+
+	/* wait for ACK status sent by host */
+	readl_poll_timeout_atomic(mbase + U3D_EP0CSR, value,
+			!(value & EP0_DATAEND), 100, 5000);
+
+	mtu3_writel(mbase, U3D_USB2_TEST_MODE, mtu->test_mode_nr);
+
+	mtu->ep0_state = MU3D_EP0_STATE_SETUP;
+
+out:
+	return handled;
+}
+
+static int ep0_handle_feature_dev(struct mtu3 *mtu,
+		struct usb_ctrlrequest *setup, bool set)
+{
+	void __iomem *mbase = mtu->mac_base;
+	int handled = -EINVAL;
+	u32 lpc;
+
+	switch (le16_to_cpu(setup->wValue)) {
+	case USB_DEVICE_REMOTE_WAKEUP:
+		mtu->may_wakeup = !!set;
+		handled = 1;
+		break;
+	case USB_DEVICE_TEST_MODE:
+		if (!set || (mtu->g.speed != USB_SPEED_HIGH) ||
+			(le16_to_cpu(setup->wIndex) & 0xff))
+			break;
+
+		handled = handle_test_mode(mtu, setup);
+		break;
+	case USB_DEVICE_U1_ENABLE:
+		if (mtu->g.speed < USB_SPEED_SUPER ||
+		    mtu->g.state != USB_STATE_CONFIGURED)
+			break;
+
+		lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
+		if (set)
+			lpc |= SW_U1_REQUEST_ENABLE;
+		else
+			lpc &= ~SW_U1_REQUEST_ENABLE;
+		mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);
+
+		mtu->u1_enable = !!set;
+		handled = 1;
+		break;
+	case USB_DEVICE_U2_ENABLE:
+		if (mtu->g.speed < USB_SPEED_SUPER ||
+		    mtu->g.state != USB_STATE_CONFIGURED)
+			break;
+
+		lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
+		if (set)
+			lpc |= SW_U2_REQUEST_ENABLE;
+		else
+			lpc &= ~SW_U2_REQUEST_ENABLE;
+		mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);
+
+		mtu->u2_enable = !!set;
+		handled = 1;
+		break;
+	default:
+		handled = -EINVAL;
+		break;
+	}
+	return handled;
+}
+
+static int ep0_handle_feature(struct mtu3 *mtu,
+		struct usb_ctrlrequest *setup, bool set)
+{
+	struct mtu3_ep *mep;
+	int handled = -EINVAL;
+	int is_in;
+	u16 value;
+	u16 index;
+	u8 epnum;
+
+	value = le16_to_cpu(setup->wValue);
+	index = le16_to_cpu(setup->wIndex);
+
+	switch (setup->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		handled = ep0_handle_feature_dev(mtu, setup, set);
+		break;
+	case USB_RECIP_INTERFACE:
+		/* superspeed only */
+		if (value == USB_INTRF_FUNC_SUSPEND &&
+		    mtu->g.speed >= USB_SPEED_SUPER) {
+			/* forward the request for function suspend */
+			mtu->may_wakeup = !!(index & USB_INTRF_FUNC_SUSPEND_RW);
+			handled = 0;
+		}
+		break;
+	case USB_RECIP_ENDPOINT:
+		epnum = index & USB_ENDPOINT_NUMBER_MASK;
+		if (epnum == 0 || epnum >= mtu->num_eps ||
+			value != USB_ENDPOINT_HALT)
+			break;
+
+		is_in = index & USB_DIR_IN;
+		mep = (is_in ? mtu->in_eps : mtu->out_eps) + epnum;
+		if (!mep->desc)
+			break;
+
+		handled = 1;
+		/* ignore request if endpoint is wedged */
+		if (mep->flags & MTU3_EP_WEDGE)
+			break;
+
+		mtu3_ep_stall_set(mep, set);
+		break;
+	default:
+		/* class, vendor, etc ... delegate */
+		handled = 0;
+		break;
+	}
+	return handled;
+}
+
+/*
+ * handle all control requests can be handled
+ * returns:
+ *	negative errno - error happened
+ *	zero - need delegate SETUP to gadget driver
+ *	positive - already handled
+ */
+static int handle_standard_request(struct mtu3 *mtu,
+			  struct usb_ctrlrequest *setup)
+{
+	void __iomem *mbase = mtu->mac_base;
+	enum usb_device_state state = mtu->g.state;
+	int handled = -EINVAL;
+	u32 dev_conf;
+	u16 value;
+
+	value = le16_to_cpu(setup->wValue);
+
+	/* the gadget driver handles everything except what we must handle */
+	switch (setup->bRequest) {
+	case USB_REQ_SET_ADDRESS:
+		/* change it after the status stage */
+		mtu->address = (u8) (value & 0x7f);
+		dev_dbg(mtu->dev, "set address to 0x%x\n", mtu->address);
+
+		dev_conf = mtu3_readl(mbase, U3D_DEVICE_CONF);
+		dev_conf &= ~DEV_ADDR_MSK;
+		dev_conf |= DEV_ADDR(mtu->address);
+		mtu3_writel(mbase, U3D_DEVICE_CONF, dev_conf);
+
+		if (mtu->address)
+			usb_gadget_set_state(&mtu->g, USB_STATE_ADDRESS);
+		else
+			usb_gadget_set_state(&mtu->g, USB_STATE_DEFAULT);
+
+		handled = 1;
+		break;
+	case USB_REQ_SET_CONFIGURATION:
+		if (state == USB_STATE_ADDRESS) {
+			usb_gadget_set_state(&mtu->g,
+					USB_STATE_CONFIGURED);
+		} else if (state == USB_STATE_CONFIGURED) {
+			/*
+			 * USB2 spec sec 9.4.7, if wValue is 0 then dev
+			 * is moved to addressed state
+			 */
+			if (!value)
+				usb_gadget_set_state(&mtu->g,
+						USB_STATE_ADDRESS);
+		}
+		handled = 0;
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+		handled = ep0_handle_feature(mtu, setup, 0);
+		break;
+	case USB_REQ_SET_FEATURE:
+		handled = ep0_handle_feature(mtu, setup, 1);
+		break;
+	case USB_REQ_GET_STATUS:
+		handled = ep0_get_status(mtu, setup);
+		break;
+	case USB_REQ_SET_SEL:
+		handled = ep0_set_sel(mtu, setup);
+		break;
+	case USB_REQ_SET_ISOCH_DELAY:
+		handled = 1;
+		break;
+	default:
+		/* delegate SET_CONFIGURATION, etc */
+		handled = 0;
+	}
+
+	return handled;
+}
+
+/* receive an data packet (OUT) */
+static void ep0_rx_state(struct mtu3 *mtu)
+{
+	struct mtu3_request *mreq;
+	struct usb_request *req;
+	void __iomem *mbase = mtu->mac_base;
+	u32 maxp;
+	u32 csr;
+	u16 count = 0;
+
+	dev_dbg(mtu->dev, "%s\n", __func__);
+
+	csr = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS;
+	mreq = next_ep0_request(mtu);
+	req = &mreq->request;
+
+	/* read packet and ack; or stall because of gadget driver bug */
+	if (req) {
+		void *buf = req->buf + req->actual;
+		unsigned int len = req->length - req->actual;
+
+		/* read the buffer */
+		count = mtu3_readl(mbase, U3D_RXCOUNT0);
+		if (count > len) {
+			req->status = -EOVERFLOW;
+			count = len;
+		}
+		ep0_read_fifo(mtu->ep0, buf, count);
+		req->actual += count;
+		csr |= EP0_RXPKTRDY;
+
+		maxp = mtu->g.ep0->maxpacket;
+		if (count < maxp || req->actual == req->length) {
+			mtu->ep0_state = MU3D_EP0_STATE_SETUP;
+			dev_dbg(mtu->dev, "ep0 state: %s\n",
+				decode_ep0_state(mtu));
+
+			csr |= EP0_DATAEND;
+		} else {
+			req = NULL;
+		}
+	} else {
+		csr |= EP0_RXPKTRDY | EP0_SENDSTALL;
+		dev_dbg(mtu->dev, "%s: SENDSTALL\n", __func__);
+	}
+
+	mtu3_writel(mbase, U3D_EP0CSR, csr);
+
+	/* give back the request if have received all data */
+	if (req)
+		ep0_req_giveback(mtu, req);
+
+}
+
+/* transmitting to the host (IN) */
+static void ep0_tx_state(struct mtu3 *mtu)
+{
+	struct mtu3_request *mreq = next_ep0_request(mtu);
+	struct usb_request *req;
+	u32 csr;
+	u8 *src;
+	u32 count;
+	u32 maxp;
+
+	dev_dbg(mtu->dev, "%s\n", __func__);
+
+	if (!mreq)
+		return;
+
+	maxp = mtu->g.ep0->maxpacket;
+	req = &mreq->request;
+
+	/* load the data */
+	src = (u8 *)req->buf + req->actual;
+	count = min(maxp, req->length - req->actual);
+	if (count)
+		ep0_write_fifo(mtu->ep0, src, count);
+
+	dev_dbg(mtu->dev, "%s act=%d, len=%d, cnt=%d, maxp=%d zero=%d\n",
+		 __func__, req->actual, req->length, count, maxp, req->zero);
+
+	req->actual += count;
+
+	if ((count < maxp)
+		|| ((req->actual == req->length) && !req->zero))
+		mtu->ep0_state = MU3D_EP0_STATE_TX_END;
+
+	/* send it out, triggering a "txpktrdy cleared" irq */
+	csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR) & EP0_W1C_BITS;
+	mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr | EP0_TXPKTRDY);
+
+	dev_dbg(mtu->dev, "%s ep0csr=0x%x\n", __func__,
+		mtu3_readl(mtu->mac_base, U3D_EP0CSR));
+}
+
+static void ep0_read_setup(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
+{
+	struct mtu3_request *mreq;
+	u32 count;
+	u32 csr;
+
+	csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR) & EP0_W1C_BITS;
+	count = mtu3_readl(mtu->mac_base, U3D_RXCOUNT0);
+
+	ep0_read_fifo(mtu->ep0, (u8 *)setup, count);
+
+	dev_dbg(mtu->dev, "SETUP req%02x.%02x v%04x i%04x l%04x\n",
+		 setup->bRequestType, setup->bRequest,
+		 le16_to_cpu(setup->wValue), le16_to_cpu(setup->wIndex),
+		 le16_to_cpu(setup->wLength));
+
+	/* clean up any leftover transfers */
+	mreq = next_ep0_request(mtu);
+	if (mreq)
+		ep0_req_giveback(mtu, &mreq->request);
+
+	if (le16_to_cpu(setup->wLength) == 0) {
+		;	/* no data stage, nothing to do */
+	} else if (setup->bRequestType & USB_DIR_IN) {
+		mtu3_writel(mtu->mac_base, U3D_EP0CSR,
+			csr | EP0_SETUPPKTRDY | EP0_DPHTX);
+		mtu->ep0_state = MU3D_EP0_STATE_TX;
+	} else {
+		mtu3_writel(mtu->mac_base, U3D_EP0CSR,
+			(csr | EP0_SETUPPKTRDY) & (~EP0_DPHTX));
+		mtu->ep0_state = MU3D_EP0_STATE_RX;
+	}
+}
+
+static int ep0_handle_setup(struct mtu3 *mtu)
+__releases(mtu->lock)
+__acquires(mtu->lock)
+{
+	struct usb_ctrlrequest setup;
+	struct mtu3_request *mreq;
+	int handled = 0;
+
+	ep0_read_setup(mtu, &setup);
+	trace_mtu3_handle_setup(&setup);
+
+	if ((setup.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+		handled = handle_standard_request(mtu, &setup);
+
+	dev_dbg(mtu->dev, "handled %d, ep0_state: %s\n",
+		 handled, decode_ep0_state(mtu));
+
+	if (handled < 0)
+		goto stall;
+	else if (handled > 0)
+		goto finish;
+
+	handled = forward_to_driver(mtu, &setup);
+	if (handled < 0) {
+stall:
+		dev_dbg(mtu->dev, "%s stall (%d)\n", __func__, handled);
+
+		ep0_stall_set(mtu->ep0, true,
+			le16_to_cpu(setup.wLength) ? 0 : EP0_SETUPPKTRDY);
+
+		return 0;
+	}
+
+finish:
+	if (mtu->test_mode) {
+		;	/* nothing to do */
+	} else if (handled == USB_GADGET_DELAYED_STATUS) {
+
+		mreq = next_ep0_request(mtu);
+		if (mreq) {
+			/* already asked us to continue delayed status */
+			ep0_do_status_stage(mtu);
+			ep0_req_giveback(mtu, &mreq->request);
+		} else {
+			/* do delayed STATUS stage till receive ep0_queue */
+			mtu->delayed_status = true;
+		}
+	} else if (le16_to_cpu(setup.wLength) == 0) { /* no data stage */
+
+		ep0_do_status_stage(mtu);
+		/* complete zlp request directly */
+		mreq = next_ep0_request(mtu);
+		if (mreq && !mreq->request.length)
+			ep0_req_giveback(mtu, &mreq->request);
+	}
+
+	return 0;
+}
+
+irqreturn_t mtu3_ep0_isr(struct mtu3 *mtu)
+{
+	void __iomem *mbase = mtu->mac_base;
+	struct mtu3_request *mreq;
+	u32 int_status;
+	irqreturn_t ret = IRQ_NONE;
+	u32 csr;
+	u32 len;
+
+	int_status = mtu3_readl(mbase, U3D_EPISR);
+	int_status &= mtu3_readl(mbase, U3D_EPIER);
+	mtu3_writel(mbase, U3D_EPISR, int_status); /* W1C */
+
+	/* only handle ep0's */
+	if (!(int_status & (EP0ISR | SETUPENDISR)))
+		return IRQ_NONE;
+
+	/* abort current SETUP, and process new one */
+	if (int_status & SETUPENDISR)
+		mtu->ep0_state = MU3D_EP0_STATE_SETUP;
+
+	csr = mtu3_readl(mbase, U3D_EP0CSR);
+
+	dev_dbg(mtu->dev, "%s csr=0x%x\n", __func__, csr);
+
+	/* we sent a stall.. need to clear it now.. */
+	if (csr & EP0_SENTSTALL) {
+		ep0_stall_set(mtu->ep0, false, 0);
+		csr = mtu3_readl(mbase, U3D_EP0CSR);
+		ret = IRQ_HANDLED;
+	}
+	dev_dbg(mtu->dev, "ep0_state: %s\n", decode_ep0_state(mtu));
+	mtu3_dbg_trace(mtu->dev, "ep0_state %s", decode_ep0_state(mtu));
+
+	switch (mtu->ep0_state) {
+	case MU3D_EP0_STATE_TX:
+		/* irq on clearing txpktrdy */
+		if ((csr & EP0_FIFOFULL) == 0) {
+			ep0_tx_state(mtu);
+			ret = IRQ_HANDLED;
+		}
+		break;
+	case MU3D_EP0_STATE_RX:
+		/* irq on set rxpktrdy */
+		if (csr & EP0_RXPKTRDY) {
+			ep0_rx_state(mtu);
+			ret = IRQ_HANDLED;
+		}
+		break;
+	case MU3D_EP0_STATE_TX_END:
+		mtu3_writel(mbase, U3D_EP0CSR,
+			(csr & EP0_W1C_BITS) | EP0_DATAEND);
+
+		mreq = next_ep0_request(mtu);
+		if (mreq)
+			ep0_req_giveback(mtu, &mreq->request);
+
+		mtu->ep0_state = MU3D_EP0_STATE_SETUP;
+		ret = IRQ_HANDLED;
+		dev_dbg(mtu->dev, "ep0_state: %s\n", decode_ep0_state(mtu));
+		break;
+	case MU3D_EP0_STATE_SETUP:
+		if (!(csr & EP0_SETUPPKTRDY))
+			break;
+
+		len = mtu3_readl(mbase, U3D_RXCOUNT0);
+		if (len != 8) {
+			dev_err(mtu->dev, "SETUP packet len %d != 8 ?\n", len);
+			break;
+		}
+
+		ep0_handle_setup(mtu);
+		ret = IRQ_HANDLED;
+		break;
+	default:
+		/* can't happen */
+		ep0_stall_set(mtu->ep0, true, 0);
+		WARN_ON(1);
+		break;
+	}
+
+	return ret;
+}
+
+
+static int mtu3_ep0_enable(struct usb_ep *ep,
+	const struct usb_endpoint_descriptor *desc)
+{
+	/* always enabled */
+	return -EINVAL;
+}
+
+static int mtu3_ep0_disable(struct usb_ep *ep)
+{
+	/* always enabled */
+	return -EINVAL;
+}
+
+static int ep0_queue(struct mtu3_ep *mep, struct mtu3_request *mreq)
+{
+	struct mtu3 *mtu = mep->mtu;
+
+	mreq->mtu = mtu;
+	mreq->request.actual = 0;
+	mreq->request.status = -EINPROGRESS;
+
+	dev_dbg(mtu->dev, "%s %s (ep0_state: %s), len#%d\n", __func__,
+		mep->name, decode_ep0_state(mtu), mreq->request.length);
+
+	switch (mtu->ep0_state) {
+	case MU3D_EP0_STATE_SETUP:
+	case MU3D_EP0_STATE_RX:	/* control-OUT data */
+	case MU3D_EP0_STATE_TX:	/* control-IN data */
+		break;
+	default:
+		dev_err(mtu->dev, "%s, error in ep0 state %s\n", __func__,
+			decode_ep0_state(mtu));
+		return -EINVAL;
+	}
+
+	if (mtu->delayed_status) {
+
+		mtu->delayed_status = false;
+		ep0_do_status_stage(mtu);
+		/* needn't giveback the request for handling delay STATUS */
+		return 0;
+	}
+
+	if (!list_empty(&mep->req_list))
+		return -EBUSY;
+
+	list_add_tail(&mreq->list, &mep->req_list);
+
+	/* sequence #1, IN ... start writing the data */
+	if (mtu->ep0_state == MU3D_EP0_STATE_TX)
+		ep0_tx_state(mtu);
+
+	return 0;
+}
+
+static int mtu3_ep0_queue(struct usb_ep *ep,
+	struct usb_request *req, gfp_t gfp)
+{
+	struct mtu3_ep *mep;
+	struct mtu3_request *mreq;
+	struct mtu3 *mtu;
+	unsigned long flags;
+	int ret = 0;
+
+	if (!ep || !req)
+		return -EINVAL;
+
+	mep = to_mtu3_ep(ep);
+	mtu = mep->mtu;
+	mreq = to_mtu3_request(req);
+
+	spin_lock_irqsave(&mtu->lock, flags);
+	ret = ep0_queue(mep, mreq);
+	spin_unlock_irqrestore(&mtu->lock, flags);
+	return ret;
+}
+
+static int mtu3_ep0_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	/* we just won't support this */
+	return -EINVAL;
+}
+
+static int mtu3_ep0_halt(struct usb_ep *ep, int value)
+{
+	struct mtu3_ep *mep;
+	struct mtu3 *mtu;
+	unsigned long flags;
+	int ret = 0;
+
+	if (!ep || !value)
+		return -EINVAL;
+
+	mep = to_mtu3_ep(ep);
+	mtu = mep->mtu;
+
+	dev_dbg(mtu->dev, "%s\n", __func__);
+
+	spin_lock_irqsave(&mtu->lock, flags);
+
+	if (!list_empty(&mep->req_list)) {
+		ret = -EBUSY;
+		goto cleanup;
+	}
+
+	switch (mtu->ep0_state) {
+	/*
+	 * stalls are usually issued after parsing SETUP packet, either
+	 * directly in irq context from setup() or else later.
+	 */
+	case MU3D_EP0_STATE_TX:
+	case MU3D_EP0_STATE_TX_END:
+	case MU3D_EP0_STATE_RX:
+	case MU3D_EP0_STATE_SETUP:
+		ep0_stall_set(mtu->ep0, true, 0);
+		break;
+	default:
+		dev_dbg(mtu->dev, "ep0 can't halt in state %s\n",
+			decode_ep0_state(mtu));
+		ret = -EINVAL;
+	}
+
+cleanup:
+	spin_unlock_irqrestore(&mtu->lock, flags);
+	return ret;
+}
+
+const struct usb_ep_ops mtu3_ep0_ops = {
+	.enable = mtu3_ep0_enable,
+	.disable = mtu3_ep0_disable,
+	.alloc_request = mtu3_alloc_request,
+	.free_request = mtu3_free_request,
+	.queue = mtu3_ep0_queue,
+	.dequeue = mtu3_ep0_dequeue,
+	.set_halt = mtu3_ep0_halt,
+};
diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
new file mode 100644
index 000000000..f3903367a
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_host.c
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * mtu3_dr.c - dual role switch and host glue layer
+ *
+ * Copyright (C) 2016 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include "mtu3.h"
+#include "mtu3_dr.h"
+
+/* mt8173 etc */
+#define PERI_WK_CTRL1	0x4
+#define WC1_IS_C(x)	(((x) & 0xf) << 26)  /* cycle debounce */
+#define WC1_IS_EN	BIT(25)
+#define WC1_IS_P	BIT(6)  /* polarity for ip sleep */
+
+/* mt8183 */
+#define PERI_WK_CTRL0	0x0
+#define WC0_IS_C(x)	((u32)(((x) & 0xf) << 28))  /* cycle debounce */
+#define WC0_IS_P	BIT(12)	/* polarity */
+#define WC0_IS_EN	BIT(6)
+
+/* mt8192 */
+#define WC0_SSUSB0_CDEN		BIT(6)
+#define WC0_IS_SPM_EN		BIT(1)
+
+/* mt2712 etc */
+#define PERI_SSUSB_SPM_CTRL	0x0
+#define SSC_IP_SLEEP_EN	BIT(4)
+#define SSC_SPM_INT_EN		BIT(1)
+
+enum ssusb_uwk_vers {
+	SSUSB_UWK_V1 = 1,
+	SSUSB_UWK_V2,
+	SSUSB_UWK_V1_1 = 101,	/* specific revision 1.01 */
+	SSUSB_UWK_V1_2,		/* specific revision 1.02 */
+};
+
+/*
+ * ip-sleep wakeup mode:
+ * all clocks can be turn off, but power domain should be kept on
+ */
+static void ssusb_wakeup_ip_sleep_set(struct ssusb_mtk *ssusb, bool enable)
+{
+	u32 reg, msk, val;
+
+	switch (ssusb->uwk_vers) {
+	case SSUSB_UWK_V1:
+		reg = ssusb->uwk_reg_base + PERI_WK_CTRL1;
+		msk = WC1_IS_EN | WC1_IS_C(0xf) | WC1_IS_P;
+		val = enable ? (WC1_IS_EN | WC1_IS_C(0x8)) : 0;
+		break;
+	case SSUSB_UWK_V1_1:
+		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0;
+		msk = WC0_IS_EN | WC0_IS_C(0xf) | WC0_IS_P;
+		val = enable ? (WC0_IS_EN | WC0_IS_C(0x1)) : 0;
+		break;
+	case SSUSB_UWK_V1_2:
+		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0;
+		msk = WC0_SSUSB0_CDEN | WC0_IS_SPM_EN;
+		val = enable ? msk : 0;
+		break;
+	case SSUSB_UWK_V2:
+		reg = ssusb->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
+		msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
+		val = enable ? msk : 0;
+		break;
+	default:
+		return;
+	}
+	regmap_update_bits(ssusb->uwk, reg, msk, val);
+}
+
+int ssusb_wakeup_of_property_parse(struct ssusb_mtk *ssusb,
+				struct device_node *dn)
+{
+	struct of_phandle_args args;
+	int ret;
+
+	/* wakeup function is optional */
+	ssusb->uwk_en = of_property_read_bool(dn, "wakeup-source");
+	if (!ssusb->uwk_en)
+		return 0;
+
+	ret = of_parse_phandle_with_fixed_args(dn,
+				"mediatek,syscon-wakeup", 2, 0, &args);
+	if (ret)
+		return ret;
+
+	ssusb->uwk_reg_base = args.args[0];
+	ssusb->uwk_vers = args.args[1];
+	ssusb->uwk = syscon_node_to_regmap(args.np);
+	of_node_put(args.np);
+	dev_info(ssusb->dev, "uwk - reg:0x%x, version:%d\n",
+			ssusb->uwk_reg_base, ssusb->uwk_vers);
+
+	return PTR_ERR_OR_ZERO(ssusb->uwk);
+}
+
+void ssusb_wakeup_set(struct ssusb_mtk *ssusb, bool enable)
+{
+	if (ssusb->uwk_en)
+		ssusb_wakeup_ip_sleep_set(ssusb, enable);
+}
+
+static void host_ports_num_get(struct ssusb_mtk *ssusb)
+{
+	u32 xhci_cap;
+
+	xhci_cap = mtu3_readl(ssusb->ippc_base, U3D_SSUSB_IP_XHCI_CAP);
+	ssusb->u2_ports = SSUSB_IP_XHCI_U2_PORT_NUM(xhci_cap);
+	ssusb->u3_ports = SSUSB_IP_XHCI_U3_PORT_NUM(xhci_cap);
+
+	dev_dbg(ssusb->dev, "host - u2_ports:%d, u3_ports:%d\n",
+		 ssusb->u2_ports, ssusb->u3_ports);
+}
+
+/* only configure ports will be used later */
+static int ssusb_host_enable(struct ssusb_mtk *ssusb)
+{
+	void __iomem *ibase = ssusb->ippc_base;
+	int num_u3p = ssusb->u3_ports;
+	int num_u2p = ssusb->u2_ports;
+	int u3_ports_disabled;
+	u32 check_clk;
+	u32 value;
+	int i;
+
+	/* power on host ip */
+	mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
+
+	/* power on and enable u3 ports except skipped ones */
+	u3_ports_disabled = 0;
+	for (i = 0; i < num_u3p; i++) {
+		if ((0x1 << i) & ssusb->u3p_dis_msk) {
+			u3_ports_disabled++;
+			continue;
+		}
+
+		value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
+		value &= ~(SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS);
+		value |= SSUSB_U3_PORT_HOST_SEL;
+		mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
+	}
+
+	/* power on and enable all u2 ports */
+	for (i = 0; i < num_u2p; i++) {
+		if ((0x1 << i) & ssusb->u2p_dis_msk)
+			continue;
+
+		value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
+		value &= ~(SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS);
+		value |= SSUSB_U2_PORT_HOST_SEL;
+		mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
+	}
+
+	check_clk = SSUSB_XHCI_RST_B_STS;
+	if (num_u3p > u3_ports_disabled)
+		check_clk = SSUSB_U3_MAC_RST_B_STS;
+
+	return ssusb_check_clocks(ssusb, check_clk);
+}
+
+static int ssusb_host_disable(struct ssusb_mtk *ssusb)
+{
+	void __iomem *ibase = ssusb->ippc_base;
+	int num_u3p = ssusb->u3_ports;
+	int num_u2p = ssusb->u2_ports;
+	u32 value;
+	int i;
+
+	/* power down and disable u3 ports except skipped ones */
+	for (i = 0; i < num_u3p; i++) {
+		if ((0x1 << i) & ssusb->u3p_dis_msk)
+			continue;
+
+		value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
+		value |= SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS;
+		mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
+	}
+
+	/* power down and disable u2 ports except skipped ones */
+	for (i = 0; i < num_u2p; i++) {
+		if ((0x1 << i) & ssusb->u2p_dis_msk)
+			continue;
+
+		value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
+		value |= SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS;
+		mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
+	}
+
+	/* power down host ip */
+	mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
+
+	return 0;
+}
+
+int ssusb_host_resume(struct ssusb_mtk *ssusb, bool p0_skipped)
+{
+	void __iomem *ibase = ssusb->ippc_base;
+	int u3p_skip_msk = ssusb->u3p_dis_msk;
+	int u2p_skip_msk = ssusb->u2p_dis_msk;
+	int num_u3p = ssusb->u3_ports;
+	int num_u2p = ssusb->u2_ports;
+	u32 value;
+	int i;
+
+	if (p0_skipped) {
+		u2p_skip_msk |= 0x1;
+		if (ssusb->otg_switch.is_u3_drd)
+			u3p_skip_msk |= 0x1;
+	}
+
+	/* power on host ip */
+	mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
+
+	/* power on u3 ports except skipped ones */
+	for (i = 0; i < num_u3p; i++) {
+		if ((0x1 << i) & u3p_skip_msk)
+			continue;
+
+		value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
+		value &= ~SSUSB_U3_PORT_PDN;
+		mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
+	}
+
+	/* power on all u2 ports except skipped ones */
+	for (i = 0; i < num_u2p; i++) {
+		if ((0x1 << i) & u2p_skip_msk)
+			continue;
+
+		value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
+		value &= ~SSUSB_U2_PORT_PDN;
+		mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
+	}
+
+	return 0;
+}
+
+/* here not skip port0 due to PDN can be set repeatedly */
+int ssusb_host_suspend(struct ssusb_mtk *ssusb)
+{
+	void __iomem *ibase = ssusb->ippc_base;
+	int num_u3p = ssusb->u3_ports;
+	int num_u2p = ssusb->u2_ports;
+	u32 value;
+	int i;
+
+	/* power down u3 ports except skipped ones */
+	for (i = 0; i < num_u3p; i++) {
+		if ((0x1 << i) & ssusb->u3p_dis_msk)
+			continue;
+
+		value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
+		value |= SSUSB_U3_PORT_PDN;
+		mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
+	}
+
+	/* power down u2 ports except skipped ones */
+	for (i = 0; i < num_u2p; i++) {
+		if ((0x1 << i) & ssusb->u2p_dis_msk)
+			continue;
+
+		value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
+		value |= SSUSB_U2_PORT_PDN;
+		mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
+	}
+
+	/* power down host ip */
+	mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
+
+	return 0;
+}
+
+static void ssusb_host_setup(struct ssusb_mtk *ssusb)
+{
+	host_ports_num_get(ssusb);
+
+	/*
+	 * power on host and power on/enable all ports
+	 * if support OTG, gadget driver will switch port0 to device mode
+	 */
+	ssusb_host_enable(ssusb);
+	ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
+
+	/* if port0 supports dual-role, works as host mode by default */
+	ssusb_set_vbus(&ssusb->otg_switch, 1);
+}
+
+static void ssusb_host_cleanup(struct ssusb_mtk *ssusb)
+{
+	if (ssusb->is_host)
+		ssusb_set_vbus(&ssusb->otg_switch, 0);
+
+	ssusb_host_disable(ssusb);
+}
+
+/*
+ * If host supports multiple ports, the VBUSes(5V) of ports except port0
+ * which supports OTG are better to be enabled by default in DTS.
+ * Because the host driver will keep link with devices attached when system
+ * enters suspend mode, so no need to control VBUSes after initialization.
+ */
+int ssusb_host_init(struct ssusb_mtk *ssusb, struct device_node *parent_dn)
+{
+	struct device *parent_dev = ssusb->dev;
+	int ret;
+
+	ssusb_host_setup(ssusb);
+
+	ret = of_platform_populate(parent_dn, NULL, NULL, parent_dev);
+	if (ret) {
+		dev_dbg(parent_dev, "failed to create child devices at %pOF\n",
+				parent_dn);
+		return ret;
+	}
+
+	dev_info(parent_dev, "xHCI platform device register success...\n");
+
+	return 0;
+}
+
+void ssusb_host_exit(struct ssusb_mtk *ssusb)
+{
+	of_platform_depopulate(ssusb->dev);
+	ssusb_host_cleanup(ssusb);
+}
diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h
new file mode 100644
index 000000000..519a58301
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_hw_regs.h
@@ -0,0 +1,542 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * mtu3_hw_regs.h - MediaTek USB3 DRD register and field definitions
+ *
+ * Copyright (C) 2016 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#ifndef _SSUSB_HW_REGS_H_
+#define _SSUSB_HW_REGS_H_
+
+/* segment offset of MAC register */
+#define SSUSB_DEV_BASE		0x0000
+#define SSUSB_EPCTL_CSR_BASE	0x0800
+#define SSUSB_USB3_MAC_CSR_BASE	0x1400
+#define SSUSB_USB3_SYS_CSR_BASE	0x1400
+#define SSUSB_USB2_CSR_BASE	0x2400
+
+/* IPPC register in Infra */
+#define SSUSB_SIFSLV_IPPC_BASE	0x0000
+
+/* --------------- SSUSB_DEV REGISTER DEFINITION --------------- */
+
+#define U3D_LV1ISR		(SSUSB_DEV_BASE + 0x0000)
+#define U3D_LV1IER		(SSUSB_DEV_BASE + 0x0004)
+#define U3D_LV1IESR		(SSUSB_DEV_BASE + 0x0008)
+#define U3D_LV1IECR		(SSUSB_DEV_BASE + 0x000C)
+
+#define U3D_EPISR		(SSUSB_DEV_BASE + 0x0080)
+#define U3D_EPIER		(SSUSB_DEV_BASE + 0x0084)
+#define U3D_EPIESR		(SSUSB_DEV_BASE + 0x0088)
+#define U3D_EPIECR		(SSUSB_DEV_BASE + 0x008C)
+
+#define U3D_EP0CSR		(SSUSB_DEV_BASE + 0x0100)
+#define U3D_RXCOUNT0		(SSUSB_DEV_BASE + 0x0108)
+#define U3D_RESERVED		(SSUSB_DEV_BASE + 0x010C)
+#define U3D_TX1CSR0		(SSUSB_DEV_BASE + 0x0110)
+#define U3D_TX1CSR1		(SSUSB_DEV_BASE + 0x0114)
+#define U3D_TX1CSR2		(SSUSB_DEV_BASE + 0x0118)
+
+#define U3D_RX1CSR0		(SSUSB_DEV_BASE + 0x0210)
+#define U3D_RX1CSR1		(SSUSB_DEV_BASE + 0x0214)
+#define U3D_RX1CSR2		(SSUSB_DEV_BASE + 0x0218)
+
+#define U3D_FIFO0		(SSUSB_DEV_BASE + 0x0300)
+
+#define U3D_QCR0		(SSUSB_DEV_BASE + 0x0400)
+#define U3D_QCR1		(SSUSB_DEV_BASE + 0x0404)
+#define U3D_QCR2		(SSUSB_DEV_BASE + 0x0408)
+#define U3D_QCR3		(SSUSB_DEV_BASE + 0x040C)
+#define U3D_QFCR		(SSUSB_DEV_BASE + 0x0428)
+#define U3D_TXQHIAR1		(SSUSB_DEV_BASE + 0x0484)
+#define U3D_RXQHIAR1		(SSUSB_DEV_BASE + 0x04C4)
+
+#define U3D_TXQCSR1		(SSUSB_DEV_BASE + 0x0510)
+#define U3D_TXQSAR1		(SSUSB_DEV_BASE + 0x0514)
+#define U3D_TXQCPR1		(SSUSB_DEV_BASE + 0x0518)
+
+#define U3D_RXQCSR1		(SSUSB_DEV_BASE + 0x0610)
+#define U3D_RXQSAR1		(SSUSB_DEV_BASE + 0x0614)
+#define U3D_RXQCPR1		(SSUSB_DEV_BASE + 0x0618)
+#define U3D_RXQLDPR1		(SSUSB_DEV_BASE + 0x061C)
+
+#define U3D_QISAR0		(SSUSB_DEV_BASE + 0x0700)
+#define U3D_QIER0		(SSUSB_DEV_BASE + 0x0704)
+#define U3D_QIESR0		(SSUSB_DEV_BASE + 0x0708)
+#define U3D_QIECR0		(SSUSB_DEV_BASE + 0x070C)
+#define U3D_QISAR1		(SSUSB_DEV_BASE + 0x0710)
+#define U3D_QIER1		(SSUSB_DEV_BASE + 0x0714)
+#define U3D_QIESR1		(SSUSB_DEV_BASE + 0x0718)
+#define U3D_QIECR1		(SSUSB_DEV_BASE + 0x071C)
+
+#define U3D_TQERRIR0		(SSUSB_DEV_BASE + 0x0780)
+#define U3D_TQERRIER0		(SSUSB_DEV_BASE + 0x0784)
+#define U3D_TQERRIESR0		(SSUSB_DEV_BASE + 0x0788)
+#define U3D_TQERRIECR0		(SSUSB_DEV_BASE + 0x078C)
+#define U3D_RQERRIR0		(SSUSB_DEV_BASE + 0x07C0)
+#define U3D_RQERRIER0		(SSUSB_DEV_BASE + 0x07C4)
+#define U3D_RQERRIESR0		(SSUSB_DEV_BASE + 0x07C8)
+#define U3D_RQERRIECR0		(SSUSB_DEV_BASE + 0x07CC)
+#define U3D_RQERRIR1		(SSUSB_DEV_BASE + 0x07D0)
+#define U3D_RQERRIER1		(SSUSB_DEV_BASE + 0x07D4)
+#define U3D_RQERRIESR1		(SSUSB_DEV_BASE + 0x07D8)
+#define U3D_RQERRIECR1		(SSUSB_DEV_BASE + 0x07DC)
+
+#define U3D_CAP_EP0FFSZ		(SSUSB_DEV_BASE + 0x0C04)
+#define U3D_CAP_EPNTXFFSZ	(SSUSB_DEV_BASE + 0x0C08)
+#define U3D_CAP_EPNRXFFSZ	(SSUSB_DEV_BASE + 0x0C0C)
+#define U3D_CAP_EPINFO		(SSUSB_DEV_BASE + 0x0C10)
+#define U3D_MISC_CTRL		(SSUSB_DEV_BASE + 0x0C84)
+
+/*---------------- SSUSB_DEV FIELD DEFINITION ---------------*/
+
+/* U3D_LV1ISR */
+#define EP_CTRL_INTR		BIT(5)
+#define MAC2_INTR		BIT(4)
+#define DMA_INTR		BIT(3)
+#define MAC3_INTR		BIT(2)
+#define QMU_INTR		BIT(1)
+#define BMU_INTR		BIT(0)
+
+/* U3D_LV1IECR */
+#define LV1IECR_MSK		GENMASK(31, 0)
+
+/* U3D_EPISR */
+#define EPRISR(x)		(BIT(16) << (x))
+#define SETUPENDISR		BIT(16)
+#define EPTISR(x)		(BIT(0) << (x))
+#define EP0ISR			BIT(0)
+
+/* U3D_EP0CSR */
+#define EP0_SENDSTALL		BIT(25)
+#define EP0_FIFOFULL		BIT(23)
+#define EP0_SENTSTALL		BIT(22)
+#define EP0_DPHTX		BIT(20)
+#define EP0_DATAEND		BIT(19)
+#define EP0_TXPKTRDY		BIT(18)
+#define EP0_SETUPPKTRDY		BIT(17)
+#define EP0_RXPKTRDY		BIT(16)
+#define EP0_MAXPKTSZ_MSK	GENMASK(9, 0)
+#define EP0_MAXPKTSZ(x)		((x) & EP0_MAXPKTSZ_MSK)
+#define EP0_W1C_BITS	(~(EP0_RXPKTRDY | EP0_SETUPPKTRDY | EP0_SENTSTALL))
+
+/* U3D_TX1CSR0 */
+#define TX_DMAREQEN		BIT(29)
+#define TX_FIFOFULL		BIT(25)
+#define TX_FIFOEMPTY		BIT(24)
+#define TX_SENTSTALL		BIT(22)
+#define TX_SENDSTALL		BIT(21)
+#define TX_TXPKTRDY		BIT(16)
+#define TX_TXMAXPKTSZ_MSK	GENMASK(10, 0)
+#define TX_TXMAXPKTSZ(x)	((x) & TX_TXMAXPKTSZ_MSK)
+#define TX_W1C_BITS		(~(TX_SENTSTALL))
+
+/* U3D_TX1CSR1 */
+#define TX_MAX_PKT_G2(x)	(((x) & 0xff) << 24)
+#define TX_MULT_G2(x)		(((x) & 0x7) << 21)
+#define TX_MULT_OG(x)		(((x) & 0x3) << 22)
+#define TX_MAX_PKT_OG(x)	(((x) & 0x3f) << 16)
+#define TX_SLOT(x)		(((x) & 0x3f) << 8)
+#define TX_TYPE(x)		(((x) & 0x3) << 4)
+#define TX_SS_BURST(x)		(((x) & 0xf) << 0)
+#define TX_MULT(g2c, x)		\
+({				\
+	typeof(x) x_ = (x);	\
+	(g2c) ? TX_MULT_G2(x_) : TX_MULT_OG(x_);	\
+})
+#define TX_MAX_PKT(g2c, x)	\
+({				\
+	typeof(x) x_ = (x);	\
+	(g2c) ? TX_MAX_PKT_G2(x_) : TX_MAX_PKT_OG(x_);	\
+})
+
+/* for TX_TYPE & RX_TYPE */
+#define TYPE_BULK		(0x0)
+#define TYPE_INT		(0x1)
+#define TYPE_ISO		(0x2)
+#define TYPE_MASK		(0x3)
+
+/* U3D_TX1CSR2 */
+#define TX_BINTERVAL(x)		(((x) & 0xff) << 24)
+#define TX_FIFOSEGSIZE(x)	(((x) & 0xf) << 16)
+#define TX_FIFOADDR(x)		(((x) & 0x1fff) << 0)
+
+/* U3D_RX1CSR0 */
+#define RX_DMAREQEN		BIT(29)
+#define RX_SENTSTALL		BIT(22)
+#define RX_SENDSTALL		BIT(21)
+#define RX_RXPKTRDY		BIT(16)
+#define RX_RXMAXPKTSZ_MSK	GENMASK(10, 0)
+#define RX_RXMAXPKTSZ(x)	((x) & RX_RXMAXPKTSZ_MSK)
+#define RX_W1C_BITS		(~(RX_SENTSTALL | RX_RXPKTRDY))
+
+/* U3D_RX1CSR1 */
+#define RX_MAX_PKT_G2(x)	(((x) & 0xff) << 24)
+#define RX_MULT_G2(x)		(((x) & 0x7) << 21)
+#define RX_MULT_OG(x)		(((x) & 0x3) << 22)
+#define RX_MAX_PKT_OG(x)	(((x) & 0x3f) << 16)
+#define RX_SLOT(x)		(((x) & 0x3f) << 8)
+#define RX_TYPE(x)		(((x) & 0x3) << 4)
+#define RX_SS_BURST(x)		(((x) & 0xf) << 0)
+#define RX_MULT(g2c, x)		\
+({				\
+	typeof(x) x_ = (x);	\
+	(g2c) ? RX_MULT_G2(x_) : RX_MULT_OG(x_);	\
+})
+#define RX_MAX_PKT(g2c, x)	\
+({				\
+	typeof(x) x_ = (x);	\
+	(g2c) ? RX_MAX_PKT_G2(x_) : RX_MAX_PKT_OG(x_);	\
+})
+
+/* U3D_RX1CSR2 */
+#define RX_BINTERVAL(x)		(((x) & 0xff) << 24)
+#define RX_FIFOSEGSIZE(x)	(((x) & 0xf) << 16)
+#define RX_FIFOADDR(x)		(((x) & 0x1fff) << 0)
+
+/* U3D_QCR0 */
+#define QMU_RX_CS_EN(x)		(BIT(16) << (x))
+#define QMU_TX_CS_EN(x)		(BIT(0) << (x))
+#define QMU_CS16B_EN		BIT(0)
+
+/* U3D_QCR1 */
+#define QMU_TX_ZLP(x)		(BIT(0) << (x))
+
+/* U3D_QCR3 */
+#define QMU_RX_COZ(x)		(BIT(16) << (x))
+#define QMU_RX_ZLP(x)		(BIT(0) << (x))
+
+/* U3D_TXQHIAR1 */
+/* U3D_RXQHIAR1 */
+#define QMU_LAST_DONE_PTR_HI(x)	(((x) >> 16) & 0xf)
+#define QMU_CUR_GPD_ADDR_HI(x)	(((x) >> 8) & 0xf)
+#define QMU_START_ADDR_HI_MSK	GENMASK(3, 0)
+#define QMU_START_ADDR_HI(x)	(((x) & 0xf) << 0)
+
+/* U3D_TXQCSR1 */
+/* U3D_RXQCSR1 */
+#define QMU_Q_ACTIVE		BIT(15)
+#define QMU_Q_STOP		BIT(2)
+#define QMU_Q_RESUME		BIT(1)
+#define QMU_Q_START		BIT(0)
+
+/* U3D_QISAR0, U3D_QIER0, U3D_QIESR0, U3D_QIECR0 */
+#define QMU_RX_DONE_INT(x)	(BIT(16) << (x))
+#define QMU_TX_DONE_INT(x)	(BIT(0) << (x))
+
+/* U3D_QISAR1, U3D_QIER1, U3D_QIESR1, U3D_QIECR1 */
+#define RXQ_ZLPERR_INT		BIT(20)
+#define RXQ_LENERR_INT		BIT(18)
+#define RXQ_CSERR_INT		BIT(17)
+#define RXQ_EMPTY_INT		BIT(16)
+#define TXQ_LENERR_INT		BIT(2)
+#define TXQ_CSERR_INT		BIT(1)
+#define TXQ_EMPTY_INT		BIT(0)
+
+/* U3D_TQERRIR0, U3D_TQERRIER0, U3D_TQERRIESR0, U3D_TQERRIECR0 */
+#define QMU_TX_LEN_ERR(x)	(BIT(16) << (x))
+#define QMU_TX_CS_ERR(x)	(BIT(0) << (x))
+
+/* U3D_RQERRIR0, U3D_RQERRIER0, U3D_RQERRIESR0, U3D_RQERRIECR0 */
+#define QMU_RX_LEN_ERR(x)	(BIT(16) << (x))
+#define QMU_RX_CS_ERR(x)	(BIT(0) << (x))
+
+/* U3D_RQERRIR1, U3D_RQERRIER1, U3D_RQERRIESR1, U3D_RQERRIECR1 */
+#define QMU_RX_ZLP_ERR(n)	(BIT(16) << (n))
+
+/* U3D_CAP_EPINFO */
+#define CAP_RX_EP_NUM(x)	(((x) >> 8) & 0x1f)
+#define CAP_TX_EP_NUM(x)	((x) & 0x1f)
+
+/* U3D_MISC_CTRL */
+#define DMA_ADDR_36BIT		BIT(31)
+#define VBUS_ON			BIT(1)
+#define VBUS_FRC_EN		BIT(0)
+
+
+/*---------------- SSUSB_EPCTL_CSR REGISTER DEFINITION ----------------*/
+
+#define U3D_DEVICE_CONF			(SSUSB_EPCTL_CSR_BASE + 0x0000)
+#define U3D_EP_RST			(SSUSB_EPCTL_CSR_BASE + 0x0004)
+
+#define U3D_DEV_LINK_INTR_ENABLE	(SSUSB_EPCTL_CSR_BASE + 0x0050)
+#define U3D_DEV_LINK_INTR		(SSUSB_EPCTL_CSR_BASE + 0x0054)
+
+/*---------------- SSUSB_EPCTL_CSR FIELD DEFINITION ----------------*/
+
+/* U3D_DEVICE_CONF */
+#define DEV_ADDR_MSK		GENMASK(30, 24)
+#define DEV_ADDR(x)		((0x7f & (x)) << 24)
+#define HW_USB2_3_SEL		BIT(18)
+#define SW_USB2_3_SEL_EN	BIT(17)
+#define SW_USB2_3_SEL		BIT(16)
+#define SSUSB_DEV_SPEED(x)	((x) & 0x7)
+
+/* U3D_EP_RST */
+#define EP1_IN_RST		BIT(17)
+#define EP1_OUT_RST		BIT(1)
+#define EP_RST(is_in, epnum)	(((is_in) ? BIT(16) : BIT(0)) << (epnum))
+#define EP0_RST			BIT(0)
+
+/* U3D_DEV_LINK_INTR_ENABLE */
+/* U3D_DEV_LINK_INTR */
+#define SSUSB_DEV_SPEED_CHG_INTR	BIT(0)
+
+
+/*---------------- SSUSB_USB3_MAC_CSR REGISTER DEFINITION ----------------*/
+
+#define U3D_LTSSM_CTRL		(SSUSB_USB3_MAC_CSR_BASE + 0x0010)
+#define U3D_USB3_CONFIG		(SSUSB_USB3_MAC_CSR_BASE + 0x001C)
+
+#define U3D_LINK_STATE_MACHINE	(SSUSB_USB3_MAC_CSR_BASE + 0x0134)
+#define U3D_LTSSM_INTR_ENABLE	(SSUSB_USB3_MAC_CSR_BASE + 0x013C)
+#define U3D_LTSSM_INTR		(SSUSB_USB3_MAC_CSR_BASE + 0x0140)
+
+#define U3D_U3U2_SWITCH_CTRL	(SSUSB_USB3_MAC_CSR_BASE + 0x0170)
+
+/*---------------- SSUSB_USB3_MAC_CSR FIELD DEFINITION ----------------*/
+
+/* U3D_LTSSM_CTRL */
+#define FORCE_POLLING_FAIL	BIT(4)
+#define FORCE_RXDETECT_FAIL	BIT(3)
+#define SOFT_U3_EXIT_EN		BIT(2)
+#define COMPLIANCE_EN		BIT(1)
+#define U1_GO_U2_EN		BIT(0)
+
+/* U3D_USB3_CONFIG */
+#define USB3_EN			BIT(0)
+
+/* U3D_LINK_STATE_MACHINE */
+#define LTSSM_STATE(x)	((x) & 0x1f)
+
+/* U3D_LTSSM_INTR_ENABLE */
+/* U3D_LTSSM_INTR */
+#define U3_RESUME_INTR		BIT(18)
+#define U3_LFPS_TMOUT_INTR	BIT(17)
+#define VBUS_FALL_INTR		BIT(16)
+#define VBUS_RISE_INTR		BIT(15)
+#define RXDET_SUCCESS_INTR	BIT(14)
+#define EXIT_U3_INTR		BIT(13)
+#define EXIT_U2_INTR		BIT(12)
+#define EXIT_U1_INTR		BIT(11)
+#define ENTER_U3_INTR		BIT(10)
+#define ENTER_U2_INTR		BIT(9)
+#define ENTER_U1_INTR		BIT(8)
+#define ENTER_U0_INTR		BIT(7)
+#define RECOVERY_INTR		BIT(6)
+#define WARM_RST_INTR		BIT(5)
+#define HOT_RST_INTR		BIT(4)
+#define LOOPBACK_INTR		BIT(3)
+#define COMPLIANCE_INTR		BIT(2)
+#define SS_DISABLE_INTR		BIT(1)
+#define SS_INACTIVE_INTR	BIT(0)
+
+/* U3D_U3U2_SWITCH_CTRL */
+#define SOFTCON_CLR_AUTO_EN	BIT(0)
+
+/*---------------- SSUSB_USB3_SYS_CSR REGISTER DEFINITION ----------------*/
+
+#define U3D_LINK_UX_INACT_TIMER	(SSUSB_USB3_SYS_CSR_BASE + 0x020C)
+#define U3D_LINK_POWER_CONTROL	(SSUSB_USB3_SYS_CSR_BASE + 0x0210)
+#define U3D_LINK_ERR_COUNT	(SSUSB_USB3_SYS_CSR_BASE + 0x0214)
+#define U3D_DEV_NOTIF_0		(SSUSB_USB3_SYS_CSR_BASE + 0x0290)
+#define U3D_DEV_NOTIF_1		(SSUSB_USB3_SYS_CSR_BASE + 0x0294)
+
+/*---------------- SSUSB_USB3_SYS_CSR FIELD DEFINITION ----------------*/
+
+/* U3D_LINK_UX_INACT_TIMER */
+#define DEV_U2_INACT_TIMEOUT_MSK	GENMASK(23, 16)
+#define DEV_U2_INACT_TIMEOUT_VALUE(x)	(((x) & 0xff) << 16)
+#define U2_INACT_TIMEOUT_MSK		GENMASK(15, 8)
+#define U1_INACT_TIMEOUT_MSK		GENMASK(7, 0)
+#define U1_INACT_TIMEOUT_VALUE(x)	((x) & 0xff)
+
+/* U3D_LINK_POWER_CONTROL */
+#define SW_U2_ACCEPT_ENABLE	BIT(9)
+#define SW_U1_ACCEPT_ENABLE	BIT(8)
+#define UX_EXIT			BIT(5)
+#define LGO_U3			BIT(4)
+#define LGO_U2			BIT(3)
+#define LGO_U1			BIT(2)
+#define SW_U2_REQUEST_ENABLE	BIT(1)
+#define SW_U1_REQUEST_ENABLE	BIT(0)
+
+/* U3D_LINK_ERR_COUNT */
+#define CLR_LINK_ERR_CNT	BIT(16)
+#define LINK_ERROR_COUNT	GENMASK(15, 0)
+
+/* U3D_DEV_NOTIF_0 */
+#define DEV_NOTIF_TYPE_SPECIFIC_LOW_MSK		GENMASK(31, 8)
+#define DEV_NOTIF_VAL_FW(x)		(((x) & 0xff) << 8)
+#define DEV_NOTIF_VAL_LTM(x)	(((x) & 0xfff) << 8)
+#define DEV_NOTIF_VAL_IAM(x)	(((x) & 0xffff) << 8)
+#define DEV_NOTIF_TYPE_MSK		GENMASK(7, 4)
+/* Notification Type */
+#define TYPE_FUNCTION_WAKE			(0x1 << 4)
+#define TYPE_LATENCY_TOLERANCE_MESSAGE		(0x2 << 4)
+#define TYPE_BUS_INTERVAL_ADJUST_MESSAGE	(0x3 << 4)
+#define TYPE_HOST_ROLE_REQUEST			(0x4 << 4)
+#define TYPE_SUBLINK_SPEED			(0x5 << 4)
+#define SEND_DEV_NOTIF			BIT(0)
+
+/*---------------- SSUSB_USB2_CSR REGISTER DEFINITION ----------------*/
+
+#define U3D_POWER_MANAGEMENT		(SSUSB_USB2_CSR_BASE + 0x0004)
+#define U3D_DEVICE_CONTROL		(SSUSB_USB2_CSR_BASE + 0x000C)
+#define U3D_USB2_TEST_MODE		(SSUSB_USB2_CSR_BASE + 0x0014)
+#define U3D_COMMON_USB_INTR_ENABLE	(SSUSB_USB2_CSR_BASE + 0x0018)
+#define U3D_COMMON_USB_INTR		(SSUSB_USB2_CSR_BASE + 0x001C)
+#define U3D_LINK_RESET_INFO		(SSUSB_USB2_CSR_BASE + 0x0024)
+#define U3D_USB20_FRAME_NUM		(SSUSB_USB2_CSR_BASE + 0x003C)
+#define U3D_USB20_LPM_PARAMETER		(SSUSB_USB2_CSR_BASE + 0x0044)
+#define U3D_USB20_MISC_CONTROL		(SSUSB_USB2_CSR_BASE + 0x004C)
+#define U3D_USB20_OPSTATE		(SSUSB_USB2_CSR_BASE + 0x0060)
+
+/*---------------- SSUSB_USB2_CSR FIELD DEFINITION ----------------*/
+
+/* U3D_POWER_MANAGEMENT */
+#define LPM_BESL_STALL		BIT(14)
+#define LPM_BESLD_STALL		BIT(13)
+#define LPM_RWP			BIT(11)
+#define LPM_HRWE		BIT(10)
+#define LPM_MODE(x)		(((x) & 0x3) << 8)
+#define ISO_UPDATE		BIT(7)
+#define SOFT_CONN		BIT(6)
+#define HS_ENABLE		BIT(5)
+#define RESUME			BIT(2)
+#define SUSPENDM_ENABLE		BIT(0)
+
+/* U3D_DEVICE_CONTROL */
+#define DC_HOSTREQ		BIT(1)
+#define DC_SESSION		BIT(0)
+
+/* U3D_USB2_TEST_MODE */
+#define U2U3_AUTO_SWITCH	BIT(10)
+#define LPM_FORCE_STALL		BIT(8)
+#define FIFO_ACCESS		BIT(6)
+#define FORCE_FS		BIT(5)
+#define FORCE_HS		BIT(4)
+#define TEST_PACKET_MODE	BIT(3)
+#define TEST_K_MODE		BIT(2)
+#define TEST_J_MODE		BIT(1)
+#define TEST_SE0_NAK_MODE	BIT(0)
+
+/* U3D_COMMON_USB_INTR_ENABLE */
+/* U3D_COMMON_USB_INTR */
+#define LPM_RESUME_INTR		BIT(9)
+#define LPM_INTR		BIT(8)
+#define DISCONN_INTR		BIT(5)
+#define CONN_INTR		BIT(4)
+#define SOF_INTR		BIT(3)
+#define RESET_INTR		BIT(2)
+#define RESUME_INTR		BIT(1)
+#define SUSPEND_INTR		BIT(0)
+
+/* U3D_LINK_RESET_INFO */
+#define WTCHRP_MSK		GENMASK(19, 16)
+
+/* U3D_USB20_LPM_PARAMETER */
+#define LPM_BESLCK_U3(x)	(((x) & 0xf) << 12)
+#define LPM_BESLCK(x)		(((x) & 0xf) << 8)
+#define LPM_BESLDCK(x)		(((x) & 0xf) << 4)
+#define LPM_BESL		GENMASK(3, 0)
+
+/* U3D_USB20_MISC_CONTROL */
+#define LPM_U3_ACK_EN		BIT(0)
+
+/*---------------- SSUSB_SIFSLV_IPPC REGISTER DEFINITION ----------------*/
+
+#define U3D_SSUSB_IP_PW_CTRL0	(SSUSB_SIFSLV_IPPC_BASE + 0x0000)
+#define U3D_SSUSB_IP_PW_CTRL1	(SSUSB_SIFSLV_IPPC_BASE + 0x0004)
+#define U3D_SSUSB_IP_PW_CTRL2	(SSUSB_SIFSLV_IPPC_BASE + 0x0008)
+#define U3D_SSUSB_IP_PW_CTRL3	(SSUSB_SIFSLV_IPPC_BASE + 0x000C)
+#define U3D_SSUSB_IP_PW_STS1	(SSUSB_SIFSLV_IPPC_BASE + 0x0010)
+#define U3D_SSUSB_IP_PW_STS2	(SSUSB_SIFSLV_IPPC_BASE + 0x0014)
+#define U3D_SSUSB_OTG_STS	(SSUSB_SIFSLV_IPPC_BASE + 0x0018)
+#define U3D_SSUSB_OTG_STS_CLR	(SSUSB_SIFSLV_IPPC_BASE + 0x001C)
+#define U3D_SSUSB_IP_XHCI_CAP	(SSUSB_SIFSLV_IPPC_BASE + 0x0024)
+#define U3D_SSUSB_IP_DEV_CAP	(SSUSB_SIFSLV_IPPC_BASE + 0x0028)
+#define U3D_SSUSB_OTG_INT_EN	(SSUSB_SIFSLV_IPPC_BASE + 0x002C)
+#define U3D_SSUSB_U3_CTRL_0P	(SSUSB_SIFSLV_IPPC_BASE + 0x0030)
+#define U3D_SSUSB_U2_CTRL_0P	(SSUSB_SIFSLV_IPPC_BASE + 0x0050)
+#define U3D_SSUSB_REF_CK_CTRL	(SSUSB_SIFSLV_IPPC_BASE + 0x008C)
+#define U3D_SSUSB_DEV_RST_CTRL	(SSUSB_SIFSLV_IPPC_BASE + 0x0098)
+#define U3D_SSUSB_HW_ID		(SSUSB_SIFSLV_IPPC_BASE + 0x00A0)
+#define U3D_SSUSB_HW_SUB_ID	(SSUSB_SIFSLV_IPPC_BASE + 0x00A4)
+#define U3D_SSUSB_IP_TRUNK_VERS	(U3D_SSUSB_HW_SUB_ID)
+#define U3D_SSUSB_PRB_CTRL0	(SSUSB_SIFSLV_IPPC_BASE + 0x00B0)
+#define U3D_SSUSB_PRB_CTRL1	(SSUSB_SIFSLV_IPPC_BASE + 0x00B4)
+#define U3D_SSUSB_PRB_CTRL2	(SSUSB_SIFSLV_IPPC_BASE + 0x00B8)
+#define U3D_SSUSB_PRB_CTRL3	(SSUSB_SIFSLV_IPPC_BASE + 0x00BC)
+#define U3D_SSUSB_PRB_CTRL4	(SSUSB_SIFSLV_IPPC_BASE + 0x00C0)
+#define U3D_SSUSB_PRB_CTRL5	(SSUSB_SIFSLV_IPPC_BASE + 0x00C4)
+#define U3D_SSUSB_IP_SPARE0	(SSUSB_SIFSLV_IPPC_BASE + 0x00C8)
+
+/*---------------- SSUSB_SIFSLV_IPPC FIELD DEFINITION ----------------*/
+
+/* U3D_SSUSB_IP_PW_CTRL0 */
+#define SSUSB_IP_SW_RST			BIT(0)
+
+/* U3D_SSUSB_IP_PW_CTRL1 */
+#define SSUSB_IP_HOST_PDN		BIT(0)
+
+/* U3D_SSUSB_IP_PW_CTRL2 */
+#define SSUSB_IP_DEV_PDN		BIT(0)
+
+/* U3D_SSUSB_IP_PW_CTRL3 */
+#define SSUSB_IP_PCIE_PDN		BIT(0)
+
+/* U3D_SSUSB_IP_PW_STS1 */
+#define SSUSB_IP_SLEEP_STS		BIT(30)
+#define SSUSB_U3_MAC_RST_B_STS		BIT(16)
+#define SSUSB_XHCI_RST_B_STS		BIT(11)
+#define SSUSB_SYS125_RST_B_STS		BIT(10)
+#define SSUSB_REF_RST_B_STS		BIT(8)
+#define SSUSB_SYSPLL_STABLE		BIT(0)
+
+/* U3D_SSUSB_IP_PW_STS2 */
+#define SSUSB_U2_MAC_SYS_RST_B_STS	BIT(0)
+
+/* U3D_SSUSB_OTG_STS */
+#define SSUSB_VBUS_VALID		BIT(9)
+
+/* U3D_SSUSB_OTG_STS_CLR */
+#define SSUSB_VBUS_INTR_CLR		BIT(6)
+
+/* U3D_SSUSB_IP_XHCI_CAP */
+#define SSUSB_IP_XHCI_U2_PORT_NUM(x)	(((x) >> 8) & 0xff)
+#define SSUSB_IP_XHCI_U3_PORT_NUM(x)	((x) & 0xff)
+
+/* U3D_SSUSB_IP_DEV_CAP */
+#define SSUSB_IP_DEV_U3_PORT_NUM(x)	((x) & 0xff)
+
+/* U3D_SSUSB_OTG_INT_EN */
+#define SSUSB_VBUS_CHG_INT_A_EN		BIT(7)
+#define SSUSB_VBUS_CHG_INT_B_EN		BIT(6)
+
+/* U3D_SSUSB_U3_CTRL_0P */
+#define SSUSB_U3_PORT_SSP_SPEED	BIT(9)
+#define SSUSB_U3_PORT_DUAL_MODE	BIT(7)
+#define SSUSB_U3_PORT_HOST_SEL		BIT(2)
+#define SSUSB_U3_PORT_PDN		BIT(1)
+#define SSUSB_U3_PORT_DIS		BIT(0)
+
+/* U3D_SSUSB_U2_CTRL_0P */
+#define SSUSB_U2_PORT_RG_IDDIG		BIT(12)
+#define SSUSB_U2_PORT_FORCE_IDDIG	BIT(11)
+#define SSUSB_U2_PORT_VBUSVALID	BIT(9)
+#define SSUSB_U2_PORT_OTG_SEL		BIT(7)
+#define SSUSB_U2_PORT_HOST		BIT(2)
+#define SSUSB_U2_PORT_PDN		BIT(1)
+#define SSUSB_U2_PORT_DIS		BIT(0)
+#define SSUSB_U2_PORT_HOST_SEL	(SSUSB_U2_PORT_VBUSVALID | SSUSB_U2_PORT_HOST)
+
+/* U3D_SSUSB_DEV_RST_CTRL */
+#define SSUSB_DEV_SW_RST		BIT(0)
+
+/* U3D_SSUSB_IP_TRUNK_VERS */
+#define IP_TRUNK_VERS(x)		(((x) >> 16) & 0xffff)
+
+#endif	/* _SSUSB_HW_REGS_H_ */
diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
new file mode 100644
index 000000000..d78ae52b4
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -0,0 +1,627 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/reset.h>
+
+#include "mtu3.h"
+#include "mtu3_dr.h"
+#include "mtu3_debug.h"
+
+/* u2-port0 should be powered on and enabled; */
+int ssusb_check_clocks(struct ssusb_mtk *ssusb, u32 ex_clks)
+{
+	void __iomem *ibase = ssusb->ippc_base;
+	u32 value, check_val;
+	int ret;
+
+	check_val = ex_clks | SSUSB_SYS125_RST_B_STS | SSUSB_SYSPLL_STABLE |
+			SSUSB_REF_RST_B_STS;
+
+	ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS1, value,
+			(check_val == (value & check_val)), 100, 20000);
+	if (ret) {
+		dev_err(ssusb->dev, "clks of sts1 are not stable!\n");
+		return ret;
+	}
+
+	ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS2, value,
+			(value & SSUSB_U2_MAC_SYS_RST_B_STS), 100, 10000);
+	if (ret) {
+		dev_err(ssusb->dev, "mac2 clock is not stable\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int wait_for_ip_sleep(struct ssusb_mtk *ssusb)
+{
+	bool sleep_check = true;
+	u32 value;
+	int ret;
+
+	if (!ssusb->is_host)
+		sleep_check = ssusb_gadget_ip_sleep_check(ssusb);
+
+	if (!sleep_check)
+		return 0;
+
+	/* wait for ip enter sleep mode */
+	ret = readl_poll_timeout(ssusb->ippc_base + U3D_SSUSB_IP_PW_STS1, value,
+				 (value & SSUSB_IP_SLEEP_STS), 100, 100000);
+	if (ret) {
+		dev_err(ssusb->dev, "ip sleep failed!!!\n");
+		ret = -EBUSY;
+	} else {
+		/* workaround: avoid wrong wakeup signal latch for some soc */
+		usleep_range(100, 200);
+	}
+
+	return ret;
+}
+
+static int ssusb_phy_init(struct ssusb_mtk *ssusb)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < ssusb->num_phys; i++) {
+		ret = phy_init(ssusb->phys[i]);
+		if (ret)
+			goto exit_phy;
+	}
+	return 0;
+
+exit_phy:
+	for (; i > 0; i--)
+		phy_exit(ssusb->phys[i - 1]);
+
+	return ret;
+}
+
+static int ssusb_phy_exit(struct ssusb_mtk *ssusb)
+{
+	int i;
+
+	for (i = 0; i < ssusb->num_phys; i++)
+		phy_exit(ssusb->phys[i]);
+
+	return 0;
+}
+
+static int ssusb_phy_power_on(struct ssusb_mtk *ssusb)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < ssusb->num_phys; i++) {
+		ret = phy_power_on(ssusb->phys[i]);
+		if (ret)
+			goto power_off_phy;
+	}
+	return 0;
+
+power_off_phy:
+	for (; i > 0; i--)
+		phy_power_off(ssusb->phys[i - 1]);
+
+	return ret;
+}
+
+static void ssusb_phy_power_off(struct ssusb_mtk *ssusb)
+{
+	unsigned int i;
+
+	for (i = 0; i < ssusb->num_phys; i++)
+		phy_power_off(ssusb->phys[i]);
+}
+
+static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
+{
+	int ret = 0;
+
+	ret = regulator_enable(ssusb->vusb33);
+	if (ret) {
+		dev_err(ssusb->dev, "failed to enable vusb33\n");
+		goto vusb33_err;
+	}
+
+	ret = clk_bulk_prepare_enable(BULK_CLKS_CNT, ssusb->clks);
+	if (ret)
+		goto clks_err;
+
+	ret = ssusb_phy_init(ssusb);
+	if (ret) {
+		dev_err(ssusb->dev, "failed to init phy\n");
+		goto phy_init_err;
+	}
+
+	ret = ssusb_phy_power_on(ssusb);
+	if (ret) {
+		dev_err(ssusb->dev, "failed to power on phy\n");
+		goto phy_err;
+	}
+
+	return 0;
+
+phy_err:
+	ssusb_phy_exit(ssusb);
+phy_init_err:
+	clk_bulk_disable_unprepare(BULK_CLKS_CNT, ssusb->clks);
+clks_err:
+	regulator_disable(ssusb->vusb33);
+vusb33_err:
+	return ret;
+}
+
+static void ssusb_rscs_exit(struct ssusb_mtk *ssusb)
+{
+	clk_bulk_disable_unprepare(BULK_CLKS_CNT, ssusb->clks);
+	regulator_disable(ssusb->vusb33);
+	ssusb_phy_power_off(ssusb);
+	ssusb_phy_exit(ssusb);
+}
+
+static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb)
+{
+	/* reset whole ip (xhci & u3d) */
+	mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
+	udelay(1);
+	mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
+
+	/*
+	 * device ip may be powered on in firmware/BROM stage before entering
+	 * kernel stage;
+	 * power down device ip, otherwise ip-sleep will fail when working as
+	 * host only mode
+	 */
+	mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
+}
+
+static void ssusb_u3_drd_check(struct ssusb_mtk *ssusb)
+{
+	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
+	u32 dev_u3p_num;
+	u32 host_u3p_num;
+	u32 value;
+
+	/* u3 port0 is disabled */
+	if (ssusb->u3p_dis_msk & BIT(0)) {
+		otg_sx->is_u3_drd = false;
+		goto out;
+	}
+
+	value = mtu3_readl(ssusb->ippc_base, U3D_SSUSB_IP_DEV_CAP);
+	dev_u3p_num = SSUSB_IP_DEV_U3_PORT_NUM(value);
+
+	value = mtu3_readl(ssusb->ippc_base, U3D_SSUSB_IP_XHCI_CAP);
+	host_u3p_num = SSUSB_IP_XHCI_U3_PORT_NUM(value);
+
+	otg_sx->is_u3_drd = !!(dev_u3p_num && host_u3p_num);
+
+out:
+	dev_info(ssusb->dev, "usb3-drd: %d\n", otg_sx->is_u3_drd);
+}
+
+static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
+	struct clk_bulk_data *clks = ssusb->clks;
+	struct device *dev = &pdev->dev;
+	int i;
+	int ret;
+
+	ssusb->vusb33 = devm_regulator_get(dev, "vusb33");
+	if (IS_ERR(ssusb->vusb33)) {
+		dev_err(dev, "failed to get vusb33\n");
+		return PTR_ERR(ssusb->vusb33);
+	}
+
+	clks[0].id = "sys_ck";
+	clks[1].id = "ref_ck";
+	clks[2].id = "mcu_ck";
+	clks[3].id = "dma_ck";
+	ret = devm_clk_bulk_get_optional(dev, BULK_CLKS_CNT, clks);
+	if (ret)
+		return ret;
+
+	ssusb->num_phys = of_count_phandle_with_args(node,
+			"phys", "#phy-cells");
+	if (ssusb->num_phys > 0) {
+		ssusb->phys = devm_kcalloc(dev, ssusb->num_phys,
+					sizeof(*ssusb->phys), GFP_KERNEL);
+		if (!ssusb->phys)
+			return -ENOMEM;
+	} else {
+		ssusb->num_phys = 0;
+	}
+
+	for (i = 0; i < ssusb->num_phys; i++) {
+		ssusb->phys[i] = devm_of_phy_get_by_index(dev, node, i);
+		if (IS_ERR(ssusb->phys[i])) {
+			dev_err(dev, "failed to get phy-%d\n", i);
+			return PTR_ERR(ssusb->phys[i]);
+		}
+	}
+
+	ssusb->ippc_base = devm_platform_ioremap_resource_byname(pdev, "ippc");
+	if (IS_ERR(ssusb->ippc_base))
+		return PTR_ERR(ssusb->ippc_base);
+
+	ssusb->wakeup_irq = platform_get_irq_byname_optional(pdev, "wakeup");
+	if (ssusb->wakeup_irq == -EPROBE_DEFER)
+		return ssusb->wakeup_irq;
+
+	ssusb->dr_mode = usb_get_dr_mode(dev);
+	if (ssusb->dr_mode == USB_DR_MODE_UNKNOWN)
+		ssusb->dr_mode = USB_DR_MODE_OTG;
+
+	of_property_read_u32(node, "mediatek,u3p-dis-msk", &ssusb->u3p_dis_msk);
+
+	if (ssusb->dr_mode == USB_DR_MODE_PERIPHERAL)
+		goto out;
+
+	/* if host role is supported */
+	ret = ssusb_wakeup_of_property_parse(ssusb, node);
+	if (ret) {
+		dev_err(dev, "failed to parse uwk property\n");
+		return ret;
+	}
+
+	/* optional property, ignore the error if it does not exist */
+	of_property_read_u32(node, "mediatek,u2p-dis-msk",
+			     &ssusb->u2p_dis_msk);
+
+	otg_sx->vbus = devm_regulator_get(dev, "vbus");
+	if (IS_ERR(otg_sx->vbus)) {
+		dev_err(dev, "failed to get vbus\n");
+		return PTR_ERR(otg_sx->vbus);
+	}
+
+	if (ssusb->dr_mode == USB_DR_MODE_HOST)
+		goto out;
+
+	/* if dual-role mode is supported */
+	otg_sx->manual_drd_enabled =
+		of_property_read_bool(node, "enable-manual-drd");
+	otg_sx->role_sw_used = of_property_read_bool(node, "usb-role-switch");
+
+	/* can't disable port0 when use dual-role mode */
+	ssusb->u2p_dis_msk &= ~0x1;
+
+	if (otg_sx->role_sw_used || otg_sx->manual_drd_enabled)
+		goto out;
+
+	if (of_property_read_bool(node, "extcon")) {
+		otg_sx->edev = extcon_get_edev_by_phandle(ssusb->dev, 0);
+		if (IS_ERR(otg_sx->edev)) {
+			return dev_err_probe(dev, PTR_ERR(otg_sx->edev),
+					     "couldn't get extcon device\n");
+		}
+	}
+
+out:
+	dev_info(dev, "dr_mode: %d, drd: %s\n", ssusb->dr_mode,
+		 otg_sx->manual_drd_enabled ? "manual" : "auto");
+	dev_info(dev, "u2p_dis_msk: %x, u3p_dis_msk: %x\n",
+		 ssusb->u2p_dis_msk, ssusb->u3p_dis_msk);
+
+	return 0;
+}
+
+static int mtu3_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct ssusb_mtk *ssusb;
+	int ret = -ENOMEM;
+
+	/* all elements are set to ZERO as default value */
+	ssusb = devm_kzalloc(dev, sizeof(*ssusb), GFP_KERNEL);
+	if (!ssusb)
+		return -ENOMEM;
+
+	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(dev, "No suitable DMA config available\n");
+		return -ENOTSUPP;
+	}
+
+	platform_set_drvdata(pdev, ssusb);
+	ssusb->dev = dev;
+
+	ret = get_ssusb_rscs(pdev, ssusb);
+	if (ret)
+		return ret;
+
+	ssusb_debugfs_create_root(ssusb);
+
+	/* enable power domain */
+	pm_runtime_set_active(dev);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_autosuspend_delay(dev, 4000);
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	device_init_wakeup(dev, true);
+
+	ret = ssusb_rscs_init(ssusb);
+	if (ret)
+		goto comm_init_err;
+
+	if (ssusb->wakeup_irq > 0) {
+		ret = dev_pm_set_dedicated_wake_irq_reverse(dev, ssusb->wakeup_irq);
+		if (ret) {
+			dev_err(dev, "failed to set wakeup irq %d\n", ssusb->wakeup_irq);
+			goto comm_exit;
+		}
+		dev_info(dev, "wakeup irq %d\n", ssusb->wakeup_irq);
+	}
+
+	ret = device_reset_optional(dev);
+	if (ret) {
+		dev_err_probe(dev, ret, "failed to reset controller\n");
+		goto comm_exit;
+	}
+
+	ssusb_ip_sw_reset(ssusb);
+	ssusb_u3_drd_check(ssusb);
+
+	if (IS_ENABLED(CONFIG_USB_MTU3_HOST))
+		ssusb->dr_mode = USB_DR_MODE_HOST;
+	else if (IS_ENABLED(CONFIG_USB_MTU3_GADGET))
+		ssusb->dr_mode = USB_DR_MODE_PERIPHERAL;
+
+	/* default as host */
+	ssusb->is_host = !(ssusb->dr_mode == USB_DR_MODE_PERIPHERAL);
+
+	switch (ssusb->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		ret = ssusb_gadget_init(ssusb);
+		if (ret) {
+			dev_err(dev, "failed to initialize gadget\n");
+			goto comm_exit;
+		}
+		break;
+	case USB_DR_MODE_HOST:
+		ret = ssusb_host_init(ssusb, node);
+		if (ret) {
+			dev_err(dev, "failed to initialize host\n");
+			goto comm_exit;
+		}
+		break;
+	case USB_DR_MODE_OTG:
+		ret = ssusb_gadget_init(ssusb);
+		if (ret) {
+			dev_err(dev, "failed to initialize gadget\n");
+			goto comm_exit;
+		}
+
+		ret = ssusb_host_init(ssusb, node);
+		if (ret) {
+			dev_err(dev, "failed to initialize host\n");
+			goto gadget_exit;
+		}
+
+		ret = ssusb_otg_switch_init(ssusb);
+		if (ret) {
+			dev_err(dev, "failed to initialize switch\n");
+			goto host_exit;
+		}
+		break;
+	default:
+		dev_err(dev, "unsupported mode: %d\n", ssusb->dr_mode);
+		ret = -EINVAL;
+		goto comm_exit;
+	}
+
+	device_enable_async_suspend(dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+	pm_runtime_forbid(dev);
+
+	return 0;
+
+host_exit:
+	ssusb_host_exit(ssusb);
+gadget_exit:
+	ssusb_gadget_exit(ssusb);
+comm_exit:
+	ssusb_rscs_exit(ssusb);
+comm_init_err:
+	pm_runtime_put_noidle(dev);
+	pm_runtime_disable(dev);
+	ssusb_debugfs_remove_root(ssusb);
+
+	return ret;
+}
+
+static int mtu3_remove(struct platform_device *pdev)
+{
+	struct ssusb_mtk *ssusb = platform_get_drvdata(pdev);
+
+	pm_runtime_get_sync(&pdev->dev);
+
+	switch (ssusb->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		ssusb_gadget_exit(ssusb);
+		break;
+	case USB_DR_MODE_HOST:
+		ssusb_host_exit(ssusb);
+		break;
+	case USB_DR_MODE_OTG:
+		ssusb_otg_switch_exit(ssusb);
+		ssusb_gadget_exit(ssusb);
+		ssusb_host_exit(ssusb);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ssusb_rscs_exit(ssusb);
+	ssusb_debugfs_remove_root(ssusb);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+
+	return 0;
+}
+
+static int resume_ip_and_ports(struct ssusb_mtk *ssusb, pm_message_t msg)
+{
+	switch (ssusb->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		ssusb_gadget_resume(ssusb, msg);
+		break;
+	case USB_DR_MODE_HOST:
+		ssusb_host_resume(ssusb, false);
+		break;
+	case USB_DR_MODE_OTG:
+		ssusb_host_resume(ssusb, !ssusb->is_host);
+		if (!ssusb->is_host)
+			ssusb_gadget_resume(ssusb, msg);
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mtu3_suspend_common(struct device *dev, pm_message_t msg)
+{
+	struct ssusb_mtk *ssusb = dev_get_drvdata(dev);
+	int ret = 0;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	switch (ssusb->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		ret = ssusb_gadget_suspend(ssusb, msg);
+		if (ret)
+			goto err;
+
+		break;
+	case USB_DR_MODE_HOST:
+		ssusb_host_suspend(ssusb);
+		break;
+	case USB_DR_MODE_OTG:
+		if (!ssusb->is_host) {
+			ret = ssusb_gadget_suspend(ssusb, msg);
+			if (ret)
+				goto err;
+		}
+		ssusb_host_suspend(ssusb);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = wait_for_ip_sleep(ssusb);
+	if (ret)
+		goto sleep_err;
+
+	ssusb_phy_power_off(ssusb);
+	clk_bulk_disable_unprepare(BULK_CLKS_CNT, ssusb->clks);
+	ssusb_wakeup_set(ssusb, true);
+	return 0;
+
+sleep_err:
+	resume_ip_and_ports(ssusb, msg);
+err:
+	return ret;
+}
+
+static int mtu3_resume_common(struct device *dev, pm_message_t msg)
+{
+	struct ssusb_mtk *ssusb = dev_get_drvdata(dev);
+	int ret;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	ssusb_wakeup_set(ssusb, false);
+	ret = clk_bulk_prepare_enable(BULK_CLKS_CNT, ssusb->clks);
+	if (ret)
+		goto clks_err;
+
+	ret = ssusb_phy_power_on(ssusb);
+	if (ret)
+		goto phy_err;
+
+	return resume_ip_and_ports(ssusb, msg);
+
+phy_err:
+	clk_bulk_disable_unprepare(BULK_CLKS_CNT, ssusb->clks);
+clks_err:
+	return ret;
+}
+
+static int __maybe_unused mtu3_suspend(struct device *dev)
+{
+	return mtu3_suspend_common(dev, PMSG_SUSPEND);
+}
+
+static int __maybe_unused mtu3_resume(struct device *dev)
+{
+	return mtu3_resume_common(dev, PMSG_SUSPEND);
+}
+
+static int __maybe_unused mtu3_runtime_suspend(struct device *dev)
+{
+	if (!device_may_wakeup(dev))
+		return 0;
+
+	return mtu3_suspend_common(dev, PMSG_AUTO_SUSPEND);
+}
+
+static int __maybe_unused mtu3_runtime_resume(struct device *dev)
+{
+	if (!device_may_wakeup(dev))
+		return 0;
+
+	return mtu3_resume_common(dev, PMSG_AUTO_SUSPEND);
+}
+
+static const struct dev_pm_ops mtu3_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(mtu3_suspend, mtu3_resume)
+	SET_RUNTIME_PM_OPS(mtu3_runtime_suspend,
+			   mtu3_runtime_resume, NULL)
+};
+
+#define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &mtu3_pm_ops : NULL)
+
+static const struct of_device_id mtu3_of_match[] = {
+	{.compatible = "mediatek,mt8173-mtu3",},
+	{.compatible = "mediatek,mtu3",},
+	{},
+};
+MODULE_DEVICE_TABLE(of, mtu3_of_match);
+
+static struct platform_driver mtu3_driver = {
+	.probe = mtu3_probe,
+	.remove = mtu3_remove,
+	.driver = {
+		.name = MTU3_DRIVER_NAME,
+		.pm = DEV_PM_OPS,
+		.of_match_table = mtu3_of_match,
+	},
+};
+module_platform_driver(mtu3_driver);
+
+MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MediaTek USB3 DRD Controller Driver");
diff --git a/drivers/usb/mtu3/mtu3_qmu.c b/drivers/usb/mtu3/mtu3_qmu.c
new file mode 100644
index 000000000..e65586147
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_qmu.c
@@ -0,0 +1,644 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * mtu3_qmu.c - Queue Management Unit driver for device controller
+ *
+ * Copyright (C) 2016 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+/*
+ * Queue Management Unit (QMU) is designed to unload SW effort
+ * to serve DMA interrupts.
+ * By preparing General Purpose Descriptor (GPD) and Buffer Descriptor (BD),
+ * SW links data buffers and triggers QMU to send / receive data to
+ * host / from device at a time.
+ * And now only GPD is supported.
+ *
+ * For more detailed information, please refer to QMU Programming Guide
+ */
+
+#include <linux/dmapool.h>
+#include <linux/iopoll.h>
+
+#include "mtu3.h"
+#include "mtu3_trace.h"
+
+#define QMU_CHECKSUM_LEN	16
+
+#define GPD_FLAGS_HWO	BIT(0)
+#define GPD_FLAGS_BDP	BIT(1)
+#define GPD_FLAGS_BPS	BIT(2)
+#define GPD_FLAGS_ZLP	BIT(6)
+#define GPD_FLAGS_IOC	BIT(7)
+#define GET_GPD_HWO(gpd)	(le32_to_cpu((gpd)->dw0_info) & GPD_FLAGS_HWO)
+
+#define GPD_RX_BUF_LEN_OG(x)	(((x) & 0xffff) << 16)
+#define GPD_RX_BUF_LEN_EL(x)	(((x) & 0xfffff) << 12)
+#define GPD_RX_BUF_LEN(mtu, x)	\
+({				\
+	typeof(x) x_ = (x);	\
+	((mtu)->gen2cp) ? GPD_RX_BUF_LEN_EL(x_) : GPD_RX_BUF_LEN_OG(x_); \
+})
+
+#define GPD_DATA_LEN_OG(x)	((x) & 0xffff)
+#define GPD_DATA_LEN_EL(x)	((x) & 0xfffff)
+#define GPD_DATA_LEN(mtu, x)	\
+({				\
+	typeof(x) x_ = (x);	\
+	((mtu)->gen2cp) ? GPD_DATA_LEN_EL(x_) : GPD_DATA_LEN_OG(x_); \
+})
+
+#define GPD_EXT_FLAG_ZLP	BIT(29)
+#define GPD_EXT_NGP_OG(x)	(((x) & 0xf) << 20)
+#define GPD_EXT_BUF_OG(x)	(((x) & 0xf) << 16)
+#define GPD_EXT_NGP_EL(x)	(((x) & 0xf) << 28)
+#define GPD_EXT_BUF_EL(x)	(((x) & 0xf) << 24)
+#define GPD_EXT_NGP(mtu, x)	\
+({				\
+	typeof(x) x_ = (x);	\
+	((mtu)->gen2cp) ? GPD_EXT_NGP_EL(x_) : GPD_EXT_NGP_OG(x_); \
+})
+
+#define GPD_EXT_BUF(mtu, x)	\
+({				\
+	typeof(x) x_ = (x);	\
+	((mtu)->gen2cp) ? GPD_EXT_BUF_EL(x_) : GPD_EXT_BUF_OG(x_); \
+})
+
+#define HILO_GEN64(hi, lo) (((u64)(hi) << 32) + (lo))
+#define HILO_DMA(hi, lo)	\
+	((dma_addr_t)HILO_GEN64((le32_to_cpu(hi)), (le32_to_cpu(lo))))
+
+static dma_addr_t read_txq_cur_addr(void __iomem *mbase, u8 epnum)
+{
+	u32 txcpr;
+	u32 txhiar;
+
+	txcpr = mtu3_readl(mbase, USB_QMU_TQCPR(epnum));
+	txhiar = mtu3_readl(mbase, USB_QMU_TQHIAR(epnum));
+
+	return HILO_DMA(QMU_CUR_GPD_ADDR_HI(txhiar), txcpr);
+}
+
+static dma_addr_t read_rxq_cur_addr(void __iomem *mbase, u8 epnum)
+{
+	u32 rxcpr;
+	u32 rxhiar;
+
+	rxcpr = mtu3_readl(mbase, USB_QMU_RQCPR(epnum));
+	rxhiar = mtu3_readl(mbase, USB_QMU_RQHIAR(epnum));
+
+	return HILO_DMA(QMU_CUR_GPD_ADDR_HI(rxhiar), rxcpr);
+}
+
+static void write_txq_start_addr(void __iomem *mbase, u8 epnum, dma_addr_t dma)
+{
+	u32 tqhiar;
+
+	mtu3_writel(mbase, USB_QMU_TQSAR(epnum),
+		    cpu_to_le32(lower_32_bits(dma)));
+	tqhiar = mtu3_readl(mbase, USB_QMU_TQHIAR(epnum));
+	tqhiar &= ~QMU_START_ADDR_HI_MSK;
+	tqhiar |= QMU_START_ADDR_HI(upper_32_bits(dma));
+	mtu3_writel(mbase, USB_QMU_TQHIAR(epnum), tqhiar);
+}
+
+static void write_rxq_start_addr(void __iomem *mbase, u8 epnum, dma_addr_t dma)
+{
+	u32 rqhiar;
+
+	mtu3_writel(mbase, USB_QMU_RQSAR(epnum),
+		    cpu_to_le32(lower_32_bits(dma)));
+	rqhiar = mtu3_readl(mbase, USB_QMU_RQHIAR(epnum));
+	rqhiar &= ~QMU_START_ADDR_HI_MSK;
+	rqhiar |= QMU_START_ADDR_HI(upper_32_bits(dma));
+	mtu3_writel(mbase, USB_QMU_RQHIAR(epnum), rqhiar);
+}
+
+static struct qmu_gpd *gpd_dma_to_virt(struct mtu3_gpd_ring *ring,
+		dma_addr_t dma_addr)
+{
+	dma_addr_t dma_base = ring->dma;
+	struct qmu_gpd *gpd_head = ring->start;
+	u32 offset = (dma_addr - dma_base) / sizeof(*gpd_head);
+
+	if (offset >= MAX_GPD_NUM)
+		return NULL;
+
+	return gpd_head + offset;
+}
+
+static dma_addr_t gpd_virt_to_dma(struct mtu3_gpd_ring *ring,
+		struct qmu_gpd *gpd)
+{
+	dma_addr_t dma_base = ring->dma;
+	struct qmu_gpd *gpd_head = ring->start;
+	u32 offset;
+
+	offset = gpd - gpd_head;
+	if (offset >= MAX_GPD_NUM)
+		return 0;
+
+	return dma_base + (offset * sizeof(*gpd));
+}
+
+static void gpd_ring_init(struct mtu3_gpd_ring *ring, struct qmu_gpd *gpd)
+{
+	ring->start = gpd;
+	ring->enqueue = gpd;
+	ring->dequeue = gpd;
+	ring->end = gpd + MAX_GPD_NUM - 1;
+}
+
+static void reset_gpd_list(struct mtu3_ep *mep)
+{
+	struct mtu3_gpd_ring *ring = &mep->gpd_ring;
+	struct qmu_gpd *gpd = ring->start;
+
+	if (gpd) {
+		gpd->dw0_info &= cpu_to_le32(~GPD_FLAGS_HWO);
+		gpd_ring_init(ring, gpd);
+	}
+}
+
+int mtu3_gpd_ring_alloc(struct mtu3_ep *mep)
+{
+	struct qmu_gpd *gpd;
+	struct mtu3_gpd_ring *ring = &mep->gpd_ring;
+
+	/* software own all gpds as default */
+	gpd = dma_pool_zalloc(mep->mtu->qmu_gpd_pool, GFP_ATOMIC, &ring->dma);
+	if (gpd == NULL)
+		return -ENOMEM;
+
+	gpd_ring_init(ring, gpd);
+
+	return 0;
+}
+
+void mtu3_gpd_ring_free(struct mtu3_ep *mep)
+{
+	struct mtu3_gpd_ring *ring = &mep->gpd_ring;
+
+	dma_pool_free(mep->mtu->qmu_gpd_pool,
+			ring->start, ring->dma);
+	memset(ring, 0, sizeof(*ring));
+}
+
+void mtu3_qmu_resume(struct mtu3_ep *mep)
+{
+	struct mtu3 *mtu = mep->mtu;
+	void __iomem *mbase = mtu->mac_base;
+	int epnum = mep->epnum;
+	u32 offset;
+
+	offset = mep->is_in ? USB_QMU_TQCSR(epnum) : USB_QMU_RQCSR(epnum);
+
+	mtu3_writel(mbase, offset, QMU_Q_RESUME);
+	if (!(mtu3_readl(mbase, offset) & QMU_Q_ACTIVE))
+		mtu3_writel(mbase, offset, QMU_Q_RESUME);
+}
+
+static struct qmu_gpd *advance_enq_gpd(struct mtu3_gpd_ring *ring)
+{
+	if (ring->enqueue < ring->end)
+		ring->enqueue++;
+	else
+		ring->enqueue = ring->start;
+
+	return ring->enqueue;
+}
+
+/* @dequeue may be NULL if ring is unallocated or freed */
+static struct qmu_gpd *advance_deq_gpd(struct mtu3_gpd_ring *ring)
+{
+	if (ring->dequeue < ring->end)
+		ring->dequeue++;
+	else
+		ring->dequeue = ring->start;
+
+	return ring->dequeue;
+}
+
+/* check if a ring is emtpy */
+static int gpd_ring_empty(struct mtu3_gpd_ring *ring)
+{
+	struct qmu_gpd *enq = ring->enqueue;
+	struct qmu_gpd *next;
+
+	if (ring->enqueue < ring->end)
+		next = enq + 1;
+	else
+		next = ring->start;
+
+	/* one gpd is reserved to simplify gpd preparation */
+	return next == ring->dequeue;
+}
+
+int mtu3_prepare_transfer(struct mtu3_ep *mep)
+{
+	return gpd_ring_empty(&mep->gpd_ring);
+}
+
+static int mtu3_prepare_tx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq)
+{
+	struct qmu_gpd *enq;
+	struct mtu3_gpd_ring *ring = &mep->gpd_ring;
+	struct qmu_gpd *gpd = ring->enqueue;
+	struct usb_request *req = &mreq->request;
+	struct mtu3 *mtu = mep->mtu;
+	dma_addr_t enq_dma;
+	u32 ext_addr;
+
+	gpd->dw0_info = 0;	/* SW own it */
+	gpd->buffer = cpu_to_le32(lower_32_bits(req->dma));
+	ext_addr = GPD_EXT_BUF(mtu, upper_32_bits(req->dma));
+	gpd->dw3_info = cpu_to_le32(GPD_DATA_LEN(mtu, req->length));
+
+	/* get the next GPD */
+	enq = advance_enq_gpd(ring);
+	enq_dma = gpd_virt_to_dma(ring, enq);
+	dev_dbg(mep->mtu->dev, "TX-EP%d queue gpd=%p, enq=%p, qdma=%pad\n",
+		mep->epnum, gpd, enq, &enq_dma);
+
+	enq->dw0_info &= cpu_to_le32(~GPD_FLAGS_HWO);
+	gpd->next_gpd = cpu_to_le32(lower_32_bits(enq_dma));
+	ext_addr |= GPD_EXT_NGP(mtu, upper_32_bits(enq_dma));
+	gpd->dw0_info = cpu_to_le32(ext_addr);
+
+	if (req->zero) {
+		if (mtu->gen2cp)
+			gpd->dw0_info |= cpu_to_le32(GPD_FLAGS_ZLP);
+		else
+			gpd->dw3_info |= cpu_to_le32(GPD_EXT_FLAG_ZLP);
+	}
+
+	/* prevent reorder, make sure GPD's HWO is set last */
+	mb();
+	gpd->dw0_info |= cpu_to_le32(GPD_FLAGS_IOC | GPD_FLAGS_HWO);
+
+	mreq->gpd = gpd;
+	trace_mtu3_prepare_gpd(mep, gpd);
+
+	return 0;
+}
+
+static int mtu3_prepare_rx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq)
+{
+	struct qmu_gpd *enq;
+	struct mtu3_gpd_ring *ring = &mep->gpd_ring;
+	struct qmu_gpd *gpd = ring->enqueue;
+	struct usb_request *req = &mreq->request;
+	struct mtu3 *mtu = mep->mtu;
+	dma_addr_t enq_dma;
+	u32 ext_addr;
+
+	gpd->dw0_info = 0;	/* SW own it */
+	gpd->buffer = cpu_to_le32(lower_32_bits(req->dma));
+	ext_addr = GPD_EXT_BUF(mtu, upper_32_bits(req->dma));
+	gpd->dw0_info = cpu_to_le32(GPD_RX_BUF_LEN(mtu, req->length));
+
+	/* get the next GPD */
+	enq = advance_enq_gpd(ring);
+	enq_dma = gpd_virt_to_dma(ring, enq);
+	dev_dbg(mep->mtu->dev, "RX-EP%d queue gpd=%p, enq=%p, qdma=%pad\n",
+		mep->epnum, gpd, enq, &enq_dma);
+
+	enq->dw0_info &= cpu_to_le32(~GPD_FLAGS_HWO);
+	gpd->next_gpd = cpu_to_le32(lower_32_bits(enq_dma));
+	ext_addr |= GPD_EXT_NGP(mtu, upper_32_bits(enq_dma));
+	gpd->dw3_info = cpu_to_le32(ext_addr);
+	/* prevent reorder, make sure GPD's HWO is set last */
+	mb();
+	gpd->dw0_info |= cpu_to_le32(GPD_FLAGS_IOC | GPD_FLAGS_HWO);
+
+	mreq->gpd = gpd;
+	trace_mtu3_prepare_gpd(mep, gpd);
+
+	return 0;
+}
+
+void mtu3_insert_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq)
+{
+
+	if (mep->is_in)
+		mtu3_prepare_tx_gpd(mep, mreq);
+	else
+		mtu3_prepare_rx_gpd(mep, mreq);
+}
+
+int mtu3_qmu_start(struct mtu3_ep *mep)
+{
+	struct mtu3 *mtu = mep->mtu;
+	void __iomem *mbase = mtu->mac_base;
+	struct mtu3_gpd_ring *ring = &mep->gpd_ring;
+	u8 epnum = mep->epnum;
+
+	if (mep->is_in) {
+		/* set QMU start address */
+		write_txq_start_addr(mbase, epnum, ring->dma);
+		mtu3_setbits(mbase, MU3D_EP_TXCR0(epnum), TX_DMAREQEN);
+		/* send zero length packet according to ZLP flag in GPD */
+		mtu3_setbits(mbase, U3D_QCR1, QMU_TX_ZLP(epnum));
+		mtu3_writel(mbase, U3D_TQERRIESR0,
+				QMU_TX_LEN_ERR(epnum) | QMU_TX_CS_ERR(epnum));
+
+		if (mtu3_readl(mbase, USB_QMU_TQCSR(epnum)) & QMU_Q_ACTIVE) {
+			dev_warn(mtu->dev, "Tx %d Active Now!\n", epnum);
+			return 0;
+		}
+		mtu3_writel(mbase, USB_QMU_TQCSR(epnum), QMU_Q_START);
+
+	} else {
+		write_rxq_start_addr(mbase, epnum, ring->dma);
+		mtu3_setbits(mbase, MU3D_EP_RXCR0(epnum), RX_DMAREQEN);
+		/* don't expect ZLP */
+		mtu3_clrbits(mbase, U3D_QCR3, QMU_RX_ZLP(epnum));
+		/* move to next GPD when receive ZLP */
+		mtu3_setbits(mbase, U3D_QCR3, QMU_RX_COZ(epnum));
+		mtu3_writel(mbase, U3D_RQERRIESR0,
+				QMU_RX_LEN_ERR(epnum) | QMU_RX_CS_ERR(epnum));
+		mtu3_writel(mbase, U3D_RQERRIESR1, QMU_RX_ZLP_ERR(epnum));
+
+		if (mtu3_readl(mbase, USB_QMU_RQCSR(epnum)) & QMU_Q_ACTIVE) {
+			dev_warn(mtu->dev, "Rx %d Active Now!\n", epnum);
+			return 0;
+		}
+		mtu3_writel(mbase, USB_QMU_RQCSR(epnum), QMU_Q_START);
+	}
+
+	return 0;
+}
+
+/* may called in atomic context */
+void mtu3_qmu_stop(struct mtu3_ep *mep)
+{
+	struct mtu3 *mtu = mep->mtu;
+	void __iomem *mbase = mtu->mac_base;
+	int epnum = mep->epnum;
+	u32 value = 0;
+	u32 qcsr;
+	int ret;
+
+	qcsr = mep->is_in ? USB_QMU_TQCSR(epnum) : USB_QMU_RQCSR(epnum);
+
+	if (!(mtu3_readl(mbase, qcsr) & QMU_Q_ACTIVE)) {
+		dev_dbg(mtu->dev, "%s's qmu is inactive now!\n", mep->name);
+		return;
+	}
+	mtu3_writel(mbase, qcsr, QMU_Q_STOP);
+
+	ret = readl_poll_timeout_atomic(mbase + qcsr, value,
+			!(value & QMU_Q_ACTIVE), 1, 1000);
+	if (ret) {
+		dev_err(mtu->dev, "stop %s's qmu failed\n", mep->name);
+		return;
+	}
+
+	dev_dbg(mtu->dev, "%s's qmu stop now!\n", mep->name);
+}
+
+void mtu3_qmu_flush(struct mtu3_ep *mep)
+{
+
+	dev_dbg(mep->mtu->dev, "%s flush QMU %s\n", __func__,
+		((mep->is_in) ? "TX" : "RX"));
+
+	/*Stop QMU */
+	mtu3_qmu_stop(mep);
+	reset_gpd_list(mep);
+}
+
+/*
+ * QMU can't transfer zero length packet directly (a hardware limit
+ * on old SoCs), so when needs to send ZLP, we intentionally trigger
+ * a length error interrupt, and in the ISR sends a ZLP by BMU.
+ */
+static void qmu_tx_zlp_error_handler(struct mtu3 *mtu, u8 epnum)
+{
+	struct mtu3_ep *mep = mtu->in_eps + epnum;
+	struct mtu3_gpd_ring *ring = &mep->gpd_ring;
+	void __iomem *mbase = mtu->mac_base;
+	struct qmu_gpd *gpd_current = NULL;
+	struct mtu3_request *mreq;
+	dma_addr_t cur_gpd_dma;
+	u32 txcsr = 0;
+	int ret;
+
+	mreq = next_request(mep);
+	if (mreq && mreq->request.length != 0)
+		return;
+
+	cur_gpd_dma = read_txq_cur_addr(mbase, epnum);
+	gpd_current = gpd_dma_to_virt(ring, cur_gpd_dma);
+
+	if (GPD_DATA_LEN(mtu, le32_to_cpu(gpd_current->dw3_info)) != 0) {
+		dev_err(mtu->dev, "TX EP%d buffer length error(!=0)\n", epnum);
+		return;
+	}
+
+	dev_dbg(mtu->dev, "%s send ZLP for req=%p\n", __func__, mreq);
+	trace_mtu3_zlp_exp_gpd(mep, gpd_current);
+
+	mtu3_clrbits(mbase, MU3D_EP_TXCR0(mep->epnum), TX_DMAREQEN);
+
+	ret = readl_poll_timeout_atomic(mbase + MU3D_EP_TXCR0(mep->epnum),
+			txcsr, !(txcsr & TX_FIFOFULL), 1, 1000);
+	if (ret) {
+		dev_err(mtu->dev, "%s wait for fifo empty fail\n", __func__);
+		return;
+	}
+	mtu3_setbits(mbase, MU3D_EP_TXCR0(mep->epnum), TX_TXPKTRDY);
+	/* prevent reorder, make sure GPD's HWO is set last */
+	mb();
+	/* by pass the current GDP */
+	gpd_current->dw0_info |= cpu_to_le32(GPD_FLAGS_BPS | GPD_FLAGS_HWO);
+
+	/*enable DMAREQEN, switch back to QMU mode */
+	mtu3_setbits(mbase, MU3D_EP_TXCR0(mep->epnum), TX_DMAREQEN);
+	mtu3_qmu_resume(mep);
+}
+
+/*
+ * NOTE: request list maybe is already empty as following case:
+ * queue_tx --> qmu_interrupt(clear interrupt pending, schedule tasklet)-->
+ * queue_tx --> process_tasklet(meanwhile, the second one is transferred,
+ * tasklet process both of them)-->qmu_interrupt for second one.
+ * To avoid upper case, put qmu_done_tx in ISR directly to process it.
+ */
+static void qmu_done_tx(struct mtu3 *mtu, u8 epnum)
+{
+	struct mtu3_ep *mep = mtu->in_eps + epnum;
+	struct mtu3_gpd_ring *ring = &mep->gpd_ring;
+	void __iomem *mbase = mtu->mac_base;
+	struct qmu_gpd *gpd = ring->dequeue;
+	struct qmu_gpd *gpd_current = NULL;
+	struct usb_request *request = NULL;
+	struct mtu3_request *mreq;
+	dma_addr_t cur_gpd_dma;
+
+	/*transfer phy address got from QMU register to virtual address */
+	cur_gpd_dma = read_txq_cur_addr(mbase, epnum);
+	gpd_current = gpd_dma_to_virt(ring, cur_gpd_dma);
+
+	dev_dbg(mtu->dev, "%s EP%d, last=%p, current=%p, enq=%p\n",
+		__func__, epnum, gpd, gpd_current, ring->enqueue);
+
+	while (gpd && gpd != gpd_current && !GET_GPD_HWO(gpd)) {
+
+		mreq = next_request(mep);
+
+		if (mreq == NULL || mreq->gpd != gpd) {
+			dev_err(mtu->dev, "no correct TX req is found\n");
+			break;
+		}
+
+		request = &mreq->request;
+		request->actual = GPD_DATA_LEN(mtu, le32_to_cpu(gpd->dw3_info));
+		trace_mtu3_complete_gpd(mep, gpd);
+		mtu3_req_complete(mep, request, 0);
+
+		gpd = advance_deq_gpd(ring);
+	}
+
+	dev_dbg(mtu->dev, "%s EP%d, deq=%p, enq=%p, complete\n",
+		__func__, epnum, ring->dequeue, ring->enqueue);
+
+}
+
+static void qmu_done_rx(struct mtu3 *mtu, u8 epnum)
+{
+	struct mtu3_ep *mep = mtu->out_eps + epnum;
+	struct mtu3_gpd_ring *ring = &mep->gpd_ring;
+	void __iomem *mbase = mtu->mac_base;
+	struct qmu_gpd *gpd = ring->dequeue;
+	struct qmu_gpd *gpd_current = NULL;
+	struct usb_request *req = NULL;
+	struct mtu3_request *mreq;
+	dma_addr_t cur_gpd_dma;
+
+	cur_gpd_dma = read_rxq_cur_addr(mbase, epnum);
+	gpd_current = gpd_dma_to_virt(ring, cur_gpd_dma);
+
+	dev_dbg(mtu->dev, "%s EP%d, last=%p, current=%p, enq=%p\n",
+		__func__, epnum, gpd, gpd_current, ring->enqueue);
+
+	while (gpd && gpd != gpd_current && !GET_GPD_HWO(gpd)) {
+
+		mreq = next_request(mep);
+
+		if (mreq == NULL || mreq->gpd != gpd) {
+			dev_err(mtu->dev, "no correct RX req is found\n");
+			break;
+		}
+		req = &mreq->request;
+
+		req->actual = GPD_DATA_LEN(mtu, le32_to_cpu(gpd->dw3_info));
+		trace_mtu3_complete_gpd(mep, gpd);
+		mtu3_req_complete(mep, req, 0);
+
+		gpd = advance_deq_gpd(ring);
+	}
+
+	dev_dbg(mtu->dev, "%s EP%d, deq=%p, enq=%p, complete\n",
+		__func__, epnum, ring->dequeue, ring->enqueue);
+}
+
+static void qmu_done_isr(struct mtu3 *mtu, u32 done_status)
+{
+	int i;
+
+	for (i = 1; i < mtu->num_eps; i++) {
+		if (done_status & QMU_RX_DONE_INT(i))
+			qmu_done_rx(mtu, i);
+		if (done_status & QMU_TX_DONE_INT(i))
+			qmu_done_tx(mtu, i);
+	}
+}
+
+static void qmu_exception_isr(struct mtu3 *mtu, u32 qmu_status)
+{
+	void __iomem *mbase = mtu->mac_base;
+	u32 errval;
+	int i;
+
+	if ((qmu_status & RXQ_CSERR_INT) || (qmu_status & RXQ_LENERR_INT)) {
+		errval = mtu3_readl(mbase, U3D_RQERRIR0);
+		for (i = 1; i < mtu->num_eps; i++) {
+			if (errval & QMU_RX_CS_ERR(i))
+				dev_err(mtu->dev, "Rx %d CS error!\n", i);
+
+			if (errval & QMU_RX_LEN_ERR(i))
+				dev_err(mtu->dev, "RX %d Length error\n", i);
+		}
+		mtu3_writel(mbase, U3D_RQERRIR0, errval);
+	}
+
+	if (qmu_status & RXQ_ZLPERR_INT) {
+		errval = mtu3_readl(mbase, U3D_RQERRIR1);
+		for (i = 1; i < mtu->num_eps; i++) {
+			if (errval & QMU_RX_ZLP_ERR(i))
+				dev_dbg(mtu->dev, "RX EP%d Recv ZLP\n", i);
+		}
+		mtu3_writel(mbase, U3D_RQERRIR1, errval);
+	}
+
+	if ((qmu_status & TXQ_CSERR_INT) || (qmu_status & TXQ_LENERR_INT)) {
+		errval = mtu3_readl(mbase, U3D_TQERRIR0);
+		for (i = 1; i < mtu->num_eps; i++) {
+			if (errval & QMU_TX_CS_ERR(i))
+				dev_err(mtu->dev, "Tx %d checksum error!\n", i);
+
+			if (errval & QMU_TX_LEN_ERR(i))
+				qmu_tx_zlp_error_handler(mtu, i);
+		}
+		mtu3_writel(mbase, U3D_TQERRIR0, errval);
+	}
+}
+
+irqreturn_t mtu3_qmu_isr(struct mtu3 *mtu)
+{
+	void __iomem *mbase = mtu->mac_base;
+	u32 qmu_status;
+	u32 qmu_done_status;
+
+	/* U3D_QISAR1 is read update */
+	qmu_status = mtu3_readl(mbase, U3D_QISAR1);
+	qmu_status &= mtu3_readl(mbase, U3D_QIER1);
+
+	qmu_done_status = mtu3_readl(mbase, U3D_QISAR0);
+	qmu_done_status &= mtu3_readl(mbase, U3D_QIER0);
+	mtu3_writel(mbase, U3D_QISAR0, qmu_done_status); /* W1C */
+	dev_dbg(mtu->dev, "=== QMUdone[tx=%x, rx=%x] QMUexp[%x] ===\n",
+		(qmu_done_status & 0xFFFF), qmu_done_status >> 16,
+		qmu_status);
+	trace_mtu3_qmu_isr(qmu_done_status, qmu_status);
+
+	if (qmu_done_status)
+		qmu_done_isr(mtu, qmu_done_status);
+
+	if (qmu_status)
+		qmu_exception_isr(mtu, qmu_status);
+
+	return IRQ_HANDLED;
+}
+
+int mtu3_qmu_init(struct mtu3 *mtu)
+{
+
+	compiletime_assert(QMU_GPD_SIZE == 16, "QMU_GPD size SHOULD be 16B");
+
+	mtu->qmu_gpd_pool = dma_pool_create("QMU_GPD", mtu->dev,
+			QMU_GPD_RING_SIZE, QMU_GPD_SIZE, 0);
+
+	if (!mtu->qmu_gpd_pool)
+		return -ENOMEM;
+
+	return 0;
+}
+
+void mtu3_qmu_exit(struct mtu3 *mtu)
+{
+	dma_pool_destroy(mtu->qmu_gpd_pool);
+}
diff --git a/drivers/usb/mtu3/mtu3_qmu.h b/drivers/usb/mtu3/mtu3_qmu.h
new file mode 100644
index 000000000..66e1c0ab5
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_qmu.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * mtu3_qmu.h - Queue Management Unit driver header
+ *
+ * Copyright (C) 2016 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#ifndef __MTK_QMU_H__
+#define __MTK_QMU_H__
+
+#define MAX_GPD_NUM		64
+#define QMU_GPD_SIZE		(sizeof(struct qmu_gpd))
+#define QMU_GPD_RING_SIZE	(MAX_GPD_NUM * QMU_GPD_SIZE)
+
+#define GPD_BUF_SIZE		65532
+#define GPD_BUF_SIZE_EL		1048572
+
+void mtu3_qmu_stop(struct mtu3_ep *mep);
+int mtu3_qmu_start(struct mtu3_ep *mep);
+void mtu3_qmu_resume(struct mtu3_ep *mep);
+void mtu3_qmu_flush(struct mtu3_ep *mep);
+
+void mtu3_insert_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq);
+int mtu3_prepare_transfer(struct mtu3_ep *mep);
+
+int mtu3_gpd_ring_alloc(struct mtu3_ep *mep);
+void mtu3_gpd_ring_free(struct mtu3_ep *mep);
+
+irqreturn_t mtu3_qmu_isr(struct mtu3 *mtu);
+int mtu3_qmu_init(struct mtu3 *mtu);
+void mtu3_qmu_exit(struct mtu3 *mtu);
+
+#endif
diff --git a/drivers/usb/mtu3/mtu3_trace.c b/drivers/usb/mtu3/mtu3_trace.c
new file mode 100644
index 000000000..d17ddb87c
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_trace.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * mtu3_trace.c - trace support
+ *
+ * Copyright (C) 2019 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#define CREATE_TRACE_POINTS
+#include "mtu3_debug.h"
+#include "mtu3_trace.h"
+
+void mtu3_dbg_trace(struct device *dev, const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+
+	va_start(args, fmt);
+	vaf.fmt = fmt;
+	vaf.va = &args;
+	trace_mtu3_log(dev, &vaf);
+	va_end(args);
+}
diff --git a/drivers/usb/mtu3/mtu3_trace.h b/drivers/usb/mtu3/mtu3_trace.h
new file mode 100644
index 000000000..03d2a9bac
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_trace.h
@@ -0,0 +1,277 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/**
+ * mtu3_trace.h - trace support
+ *
+ * Copyright (C) 2019 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM mtu3
+
+#if !defined(__MTU3_TRACE_H__) || defined(TRACE_HEADER_MULTI_READ)
+#define __MTU3_TRACE_H__
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+
+#include "mtu3.h"
+
+TRACE_EVENT(mtu3_log,
+	TP_PROTO(struct device *dev, struct va_format *vaf),
+	TP_ARGS(dev, vaf),
+	TP_STRUCT__entry(
+		__string(name, dev_name(dev))
+		__vstring(msg, vaf->fmt, vaf->va)
+	),
+	TP_fast_assign(
+		__assign_str(name, dev_name(dev));
+		__assign_vstr(msg, vaf->fmt, vaf->va);
+	),
+	TP_printk("%s: %s", __get_str(name), __get_str(msg))
+);
+
+TRACE_EVENT(mtu3_u3_ltssm_isr,
+	TP_PROTO(u32 intr),
+	TP_ARGS(intr),
+	TP_STRUCT__entry(
+		__field(u32, intr)
+	),
+	TP_fast_assign(
+		__entry->intr = intr;
+	),
+	TP_printk("(%08x) %s %s %s %s %s %s", __entry->intr,
+		__entry->intr & HOT_RST_INTR ? "HOT_RST" : "",
+		__entry->intr & WARM_RST_INTR ? "WARM_RST" : "",
+		__entry->intr & ENTER_U3_INTR ? "ENT_U3" : "",
+		__entry->intr & EXIT_U3_INTR ? "EXIT_U3" : "",
+		__entry->intr & VBUS_RISE_INTR ? "VBUS_RISE" : "",
+		__entry->intr & VBUS_FALL_INTR ? "VBUS_FALL" : ""
+	)
+);
+
+TRACE_EVENT(mtu3_u2_common_isr,
+	TP_PROTO(u32 intr),
+	TP_ARGS(intr),
+	TP_STRUCT__entry(
+		__field(u32, intr)
+	),
+	TP_fast_assign(
+		__entry->intr = intr;
+	),
+	TP_printk("(%08x) %s %s %s", __entry->intr,
+		__entry->intr & SUSPEND_INTR ? "SUSPEND" : "",
+		__entry->intr & RESUME_INTR ? "RESUME" : "",
+		__entry->intr & RESET_INTR ? "RESET" : ""
+	)
+);
+
+TRACE_EVENT(mtu3_qmu_isr,
+	TP_PROTO(u32 done_intr, u32 exp_intr),
+	TP_ARGS(done_intr, exp_intr),
+	TP_STRUCT__entry(
+		__field(u32, done_intr)
+		__field(u32, exp_intr)
+	),
+	TP_fast_assign(
+		__entry->done_intr = done_intr;
+		__entry->exp_intr = exp_intr;
+	),
+	TP_printk("done (tx %04x, rx %04x), exp (%08x)",
+		__entry->done_intr & 0xffff,
+		__entry->done_intr >> 16,
+		__entry->exp_intr
+	)
+);
+
+DECLARE_EVENT_CLASS(mtu3_log_setup,
+	TP_PROTO(struct usb_ctrlrequest *setup),
+	TP_ARGS(setup),
+	TP_STRUCT__entry(
+		__field(__u8, bRequestType)
+		__field(__u8, bRequest)
+		__field(__u16, wValue)
+		__field(__u16, wIndex)
+		__field(__u16, wLength)
+	),
+	TP_fast_assign(
+		__entry->bRequestType = setup->bRequestType;
+		__entry->bRequest = setup->bRequest;
+		__entry->wValue = le16_to_cpu(setup->wValue);
+		__entry->wIndex = le16_to_cpu(setup->wIndex);
+		__entry->wLength = le16_to_cpu(setup->wLength);
+	),
+	TP_printk("setup - %02x %02x %04x %04x %04x",
+		__entry->bRequestType, __entry->bRequest,
+		__entry->wValue, __entry->wIndex, __entry->wLength
+	)
+);
+
+DEFINE_EVENT(mtu3_log_setup, mtu3_handle_setup,
+	TP_PROTO(struct usb_ctrlrequest *setup),
+	TP_ARGS(setup)
+);
+
+DECLARE_EVENT_CLASS(mtu3_log_request,
+	TP_PROTO(struct mtu3_request *mreq),
+	TP_ARGS(mreq),
+	TP_STRUCT__entry(
+		__string(name, mreq->mep->name)
+		__field(struct mtu3_request *, mreq)
+		__field(struct qmu_gpd *, gpd)
+		__field(unsigned int, actual)
+		__field(unsigned int, length)
+		__field(int, status)
+		__field(int, zero)
+		__field(int, no_interrupt)
+	),
+	TP_fast_assign(
+		__assign_str(name, mreq->mep->name);
+		__entry->mreq = mreq;
+		__entry->gpd = mreq->gpd;
+		__entry->actual = mreq->request.actual;
+		__entry->length = mreq->request.length;
+		__entry->status = mreq->request.status;
+		__entry->zero = mreq->request.zero;
+		__entry->no_interrupt = mreq->request.no_interrupt;
+	),
+	TP_printk("%s: req %p gpd %p len %u/%u %s%s --> %d",
+		__get_str(name), __entry->mreq, __entry->gpd,
+		__entry->actual, __entry->length,
+		__entry->zero ? "Z" : "z",
+		__entry->no_interrupt ? "i" : "I",
+		__entry->status
+	)
+);
+
+DEFINE_EVENT(mtu3_log_request, mtu3_alloc_request,
+	TP_PROTO(struct mtu3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(mtu3_log_request, mtu3_free_request,
+	TP_PROTO(struct mtu3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(mtu3_log_request, mtu3_gadget_queue,
+	TP_PROTO(struct mtu3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(mtu3_log_request, mtu3_gadget_dequeue,
+	TP_PROTO(struct mtu3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(mtu3_log_request, mtu3_req_complete,
+	TP_PROTO(struct mtu3_request *req),
+	TP_ARGS(req)
+);
+
+DECLARE_EVENT_CLASS(mtu3_log_gpd,
+	TP_PROTO(struct mtu3_ep *mep, struct qmu_gpd *gpd),
+	TP_ARGS(mep, gpd),
+	TP_STRUCT__entry(
+		__string(name, mep->name)
+		__field(struct qmu_gpd *, gpd)
+		__field(u32, dw0)
+		__field(u32, dw1)
+		__field(u32, dw2)
+		__field(u32, dw3)
+	),
+	TP_fast_assign(
+		__assign_str(name, mep->name);
+		__entry->gpd = gpd;
+		__entry->dw0 = le32_to_cpu(gpd->dw0_info);
+		__entry->dw1 = le32_to_cpu(gpd->next_gpd);
+		__entry->dw2 = le32_to_cpu(gpd->buffer);
+		__entry->dw3 = le32_to_cpu(gpd->dw3_info);
+	),
+	TP_printk("%s: gpd %p - %08x %08x %08x %08x",
+		__get_str(name), __entry->gpd,
+		__entry->dw0, __entry->dw1,
+		__entry->dw2, __entry->dw3
+	)
+);
+
+DEFINE_EVENT(mtu3_log_gpd, mtu3_prepare_gpd,
+	TP_PROTO(struct mtu3_ep *mep, struct qmu_gpd *gpd),
+	TP_ARGS(mep, gpd)
+);
+
+DEFINE_EVENT(mtu3_log_gpd, mtu3_complete_gpd,
+	TP_PROTO(struct mtu3_ep *mep, struct qmu_gpd *gpd),
+	TP_ARGS(mep, gpd)
+);
+
+DEFINE_EVENT(mtu3_log_gpd, mtu3_zlp_exp_gpd,
+	TP_PROTO(struct mtu3_ep *mep, struct qmu_gpd *gpd),
+	TP_ARGS(mep, gpd)
+);
+
+DECLARE_EVENT_CLASS(mtu3_log_ep,
+	TP_PROTO(struct mtu3_ep *mep),
+	TP_ARGS(mep),
+	TP_STRUCT__entry(
+		__string(name, mep->name)
+		__field(unsigned int, type)
+		__field(unsigned int, slot)
+		__field(unsigned int, maxp)
+		__field(unsigned int, mult)
+		__field(unsigned int, maxburst)
+		__field(unsigned int, flags)
+		__field(unsigned int, direction)
+		__field(struct mtu3_gpd_ring *, gpd_ring)
+	),
+	TP_fast_assign(
+		__assign_str(name, mep->name);
+		__entry->type = mep->type;
+		__entry->slot = mep->slot;
+		__entry->maxp = mep->ep.maxpacket;
+		__entry->mult = mep->ep.mult;
+		__entry->maxburst = mep->ep.maxburst;
+		__entry->flags = mep->flags;
+		__entry->direction = mep->is_in;
+		__entry->gpd_ring = &mep->gpd_ring;
+	),
+	TP_printk("%s: type %s maxp %d slot %d mult %d burst %d ring %p/%pad flags %c:%c%c%c:%c",
+		__get_str(name), usb_ep_type_string(__entry->type),
+		__entry->maxp, __entry->slot,
+		__entry->mult, __entry->maxburst,
+		__entry->gpd_ring, &__entry->gpd_ring->dma,
+		__entry->flags & MTU3_EP_ENABLED ? 'E' : 'e',
+		__entry->flags & MTU3_EP_STALL ? 'S' : 's',
+		__entry->flags & MTU3_EP_WEDGE ? 'W' : 'w',
+		__entry->flags & MTU3_EP_BUSY ? 'B' : 'b',
+		__entry->direction ? '<' : '>'
+	)
+);
+
+DEFINE_EVENT(mtu3_log_ep, mtu3_gadget_ep_enable,
+	TP_PROTO(struct mtu3_ep *mep),
+	TP_ARGS(mep)
+);
+
+DEFINE_EVENT(mtu3_log_ep, mtu3_gadget_ep_disable,
+	TP_PROTO(struct mtu3_ep *mep),
+	TP_ARGS(mep)
+);
+
+DEFINE_EVENT(mtu3_log_ep, mtu3_gadget_ep_set_halt,
+	TP_PROTO(struct mtu3_ep *mep),
+	TP_ARGS(mep)
+);
+
+#endif /* __MTU3_TRACE_H__ */
+
+/* this part has to be here */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE mtu3_trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
new file mode 100644
index 000000000..6c8f7763e
--- /dev/null
+++ b/drivers/usb/musb/Kconfig
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Dual Role (OTG-ready) Controller Drivers
+# for silicon based on Mentor Graphics INVENTRA designs
+#
+
+# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
+config USB_MUSB_HDRC
+	tristate 'Inventra Highspeed Dual Role Controller'
+	depends on (USB || USB_GADGET)
+	depends on HAS_IOMEM
+	help
+	  Say Y here if your system has a dual role high speed USB
+	  controller based on the Mentor Graphics silicon IP.  Then
+	  configure options to match your silicon and the board
+	  it's being used with, including the USB peripheral role,
+	  or the USB host role, or both.
+
+	  Texas Instruments families using this IP include DaVinci
+	  (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
+
+	  Allwinner SoCs using this IP include A10, A13, A20, ...
+
+	  If you do not know what this is, please say N.
+
+	  To compile this driver as a module, choose M here; the
+	  module will be called "musb-hdrc".
+
+if USB_MUSB_HDRC
+
+choice
+	bool "MUSB Mode Selection"
+	default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET)
+	default USB_MUSB_HOST if (USB && !USB_GADGET)
+	default USB_MUSB_GADGET if (!USB && USB_GADGET)
+
+config USB_MUSB_HOST
+	bool "Host only mode"
+	depends on USB=y || USB=USB_MUSB_HDRC
+	help
+	  Select this when you want to use MUSB in host mode only,
+	  thereby the gadget feature will be regressed.
+
+config USB_MUSB_GADGET
+	bool "Gadget only mode"
+	depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC
+	depends on HAS_DMA
+	help
+	  Select this when you want to use MUSB in gadget mode only,
+	  thereby the host feature will be regressed.
+
+config USB_MUSB_DUAL_ROLE
+	bool "Dual Role mode"
+	depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC))
+	depends on HAS_DMA
+	help
+	  This is the default mode of working of MUSB controller where
+	  both host and gadget features are enabled.
+
+endchoice
+
+comment "Platform Glue Layer"
+
+config USB_MUSB_SUNXI
+	tristate "Allwinner (sunxi)"
+	depends on ARCH_SUNXI
+	depends on NOP_USB_XCEIV
+	depends on PHY_SUN4I_USB
+	depends on EXTCON
+	select GENERIC_PHY
+	select SUNXI_SRAM
+
+config USB_MUSB_DAVINCI
+	tristate "DaVinci"
+	depends on ARCH_DAVINCI_DMx
+	depends on NOP_USB_XCEIV
+	depends on BROKEN
+
+config USB_MUSB_DA8XX
+	tristate "DA8xx/OMAP-L1x"
+	depends on ARCH_DAVINCI_DA8XX
+	depends on NOP_USB_XCEIV
+	select PHY_DA8XX_USB
+
+config USB_MUSB_TUSB6010
+	tristate "TUSB6010"
+	depends on HAS_IOMEM
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	depends on NOP_USB_XCEIV!=m || USB_MUSB_HDRC=m
+
+config USB_MUSB_OMAP2PLUS
+	tristate "OMAP2430 and onwards"
+	depends on ARCH_OMAP2PLUS && USB
+	depends on OMAP_CONTROL_PHY || !OMAP_CONTROL_PHY
+	select GENERIC_PHY
+
+config USB_MUSB_AM35X
+	tristate "AM35x"
+	depends on ARCH_OMAP
+	depends on NOP_USB_XCEIV
+
+config USB_MUSB_DSPS
+	tristate "TI DSPS platforms"
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	depends on OF_IRQ
+
+config USB_MUSB_UX500
+	tristate "Ux500 platforms"
+	depends on ARCH_U8500 || COMPILE_TEST
+
+config USB_MUSB_JZ4740
+	tristate "JZ4740"
+	depends on OF
+	depends on MIPS || COMPILE_TEST
+	depends on USB_MUSB_GADGET
+	depends on USB=n || USB_OTG_DISABLE_EXTERNAL_HUB
+	select USB_ROLE_SWITCH
+
+config USB_MUSB_MEDIATEK
+	tristate "MediaTek platforms"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on NOP_USB_XCEIV
+	select GENERIC_PHY
+	select USB_ROLE_SWITCH
+
+config USB_MUSB_POLARFIRE_SOC
+	tristate "Microchip PolarFire SoC platforms"
+	depends on SOC_MICROCHIP_POLARFIRE || COMPILE_TEST
+	depends on NOP_USB_XCEIV
+	select USB_MUSB_DUAL_ROLE
+	help
+	  Say Y here to enable support for USB on Microchip's PolarFire SoC.
+
+	  This support is also available as a module.  If so, the module
+	  will be called mpfs.
+
+comment "MUSB DMA mode"
+
+config MUSB_PIO_ONLY
+	bool 'Disable DMA (always use PIO)'
+	help
+	  All data is copied between memory and FIFO by the CPU.
+	  DMA controllers are ignored.
+
+	  Do not choose this unless DMA support for your SOC or board
+	  is unavailable (or unstable).  When DMA is enabled at compile time,
+	  you can still disable it at run time using the "use_dma=n" module
+	  parameter.
+
+if !MUSB_PIO_ONLY
+
+config USB_UX500_DMA
+	bool 'ST Ericsson Ux500'
+	depends on USB_MUSB_UX500
+	help
+	  Enable DMA transfers on UX500 platforms.
+
+config USB_INVENTRA_DMA
+	bool 'Inventra'
+	depends on USB_MUSB_OMAP2PLUS || USB_MUSB_MEDIATEK || USB_MUSB_JZ4740 || USB_MUSB_POLARFIRE_SOC
+	help
+	  Enable DMA transfers using Mentor's engine.
+
+config USB_TI_CPPI_DMA
+	bool 'TI CPPI (Davinci)'
+	depends on USB_MUSB_DAVINCI
+	help
+	  Enable DMA transfers when TI CPPI DMA is available.
+
+config USB_TI_CPPI41_DMA
+	bool 'TI CPPI 4.1'
+	depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX) && DMADEVICES
+	select TI_CPPI41
+
+config USB_TUSB_OMAP_DMA
+	bool 'TUSB 6010'
+	depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules
+	depends on ARCH_OMAP
+	help
+	  Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
+
+endif # !MUSB_PIO_ONLY
+
+endif # USB_MUSB_HDRC
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
new file mode 100644
index 000000000..51dd54a8d
--- /dev/null
+++ b/drivers/usb/musb/Makefile
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# for USB OTG silicon based on Mentor Graphics INVENTRA designs
+#
+
+# define_trace.h needs to know how to find our header
+CFLAGS_musb_trace.o	:= -I$(src)
+
+obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
+
+musb_hdrc-y := musb_core.o musb_trace.o
+
+musb_hdrc-$(CONFIG_USB_MUSB_HOST)$(CONFIG_USB_MUSB_DUAL_ROLE) += musb_virthub.o musb_host.o
+musb_hdrc-$(CONFIG_USB_MUSB_GADGET)$(CONFIG_USB_MUSB_DUAL_ROLE) += musb_gadget_ep0.o musb_gadget.o
+musb_hdrc-$(CONFIG_DEBUG_FS)			+= musb_debugfs.o
+
+# Hardware Glue Layer
+obj-$(CONFIG_USB_MUSB_OMAP2PLUS)		+= omap2430.o
+obj-$(CONFIG_USB_MUSB_AM35X)			+= am35x.o
+obj-$(CONFIG_USB_MUSB_DSPS)			+= musb_dsps.o
+obj-$(CONFIG_USB_MUSB_TUSB6010)			+= tusb6010.o
+obj-$(CONFIG_USB_MUSB_DAVINCI)			+= davinci.o
+obj-$(CONFIG_USB_MUSB_DA8XX)			+= da8xx.o
+obj-$(CONFIG_USB_MUSB_UX500)			+= ux500.o
+obj-$(CONFIG_USB_MUSB_JZ4740)			+= jz4740.o
+obj-$(CONFIG_USB_MUSB_SUNXI)			+= sunxi.o
+obj-$(CONFIG_USB_MUSB_MEDIATEK)      		+= mediatek.o
+obj-$(CONFIG_USB_MUSB_POLARFIRE_SOC)		+= mpfs.o
+
+# the kconfig must guarantee that only one of the
+# possible I/O schemes will be enabled at a time ...
+# PIO only, or DMA (several potential schemes).
+# though PIO is always there to back up DMA, and for ep0
+
+musb_hdrc-$(CONFIG_USB_INVENTRA_DMA)		+= musbhsdma.o
+musb_hdrc-$(CONFIG_USB_TI_CPPI_DMA)		+= cppi_dma.o
+musb_hdrc-$(CONFIG_USB_TUSB_OMAP_DMA)		+= tusb6010_omap.o
+musb_hdrc-$(CONFIG_USB_UX500_DMA)		+= ux500_dma.o
+musb_hdrc-$(CONFIG_USB_TI_CPPI41_DMA)		+= musb_cppi41.o
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
new file mode 100644
index 000000000..bf2c0fa6c
--- /dev/null
+++ b/drivers/usb/musb/am35x.c
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Texas Instruments AM35x "glue layer"
+ *
+ * Copyright (c) 2010, by Texas Instruments
+ *
+ * Based on the DA8xx "glue layer" code.
+ * Copyright (c) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/usb_phy_generic.h>
+#include <linux/platform_data/usb-omap.h>
+
+#include "musb_core.h"
+
+/*
+ * AM35x specific definitions
+ */
+/* USB 2.0 OTG module registers */
+#define USB_REVISION_REG	0x00
+#define USB_CTRL_REG		0x04
+#define USB_STAT_REG		0x08
+#define USB_EMULATION_REG	0x0c
+/* 0x10 Reserved */
+#define USB_AUTOREQ_REG		0x14
+#define USB_SRP_FIX_TIME_REG	0x18
+#define USB_TEARDOWN_REG	0x1c
+#define EP_INTR_SRC_REG		0x20
+#define EP_INTR_SRC_SET_REG	0x24
+#define EP_INTR_SRC_CLEAR_REG	0x28
+#define EP_INTR_MASK_REG	0x2c
+#define EP_INTR_MASK_SET_REG	0x30
+#define EP_INTR_MASK_CLEAR_REG	0x34
+#define EP_INTR_SRC_MASKED_REG	0x38
+#define CORE_INTR_SRC_REG	0x40
+#define CORE_INTR_SRC_SET_REG	0x44
+#define CORE_INTR_SRC_CLEAR_REG	0x48
+#define CORE_INTR_MASK_REG	0x4c
+#define CORE_INTR_MASK_SET_REG	0x50
+#define CORE_INTR_MASK_CLEAR_REG 0x54
+#define CORE_INTR_SRC_MASKED_REG 0x58
+/* 0x5c Reserved */
+#define USB_END_OF_INTR_REG	0x60
+
+/* Control register bits */
+#define AM35X_SOFT_RESET_MASK	1
+
+/* USB interrupt register bits */
+#define AM35X_INTR_USB_SHIFT	16
+#define AM35X_INTR_USB_MASK	(0x1ff << AM35X_INTR_USB_SHIFT)
+#define AM35X_INTR_DRVVBUS	0x100
+#define AM35X_INTR_RX_SHIFT	16
+#define AM35X_INTR_TX_SHIFT	0
+#define AM35X_TX_EP_MASK	0xffff		/* EP0 + 15 Tx EPs */
+#define AM35X_RX_EP_MASK	0xfffe		/* 15 Rx EPs */
+#define AM35X_TX_INTR_MASK	(AM35X_TX_EP_MASK << AM35X_INTR_TX_SHIFT)
+#define AM35X_RX_INTR_MASK	(AM35X_RX_EP_MASK << AM35X_INTR_RX_SHIFT)
+
+#define USB_MENTOR_CORE_OFFSET	0x400
+
+struct am35x_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct platform_device	*phy;
+	struct clk		*phy_clk;
+	struct clk		*clk;
+};
+
+/*
+ * am35x_musb_enable - enable interrupts
+ */
+static void am35x_musb_enable(struct musb *musb)
+{
+	void __iomem *reg_base = musb->ctrl_base;
+	u32 epmask;
+
+	/* Workaround: setup IRQs through both register sets. */
+	epmask = ((musb->epmask & AM35X_TX_EP_MASK) << AM35X_INTR_TX_SHIFT) |
+	       ((musb->epmask & AM35X_RX_EP_MASK) << AM35X_INTR_RX_SHIFT);
+
+	musb_writel(reg_base, EP_INTR_MASK_SET_REG, epmask);
+	musb_writel(reg_base, CORE_INTR_MASK_SET_REG, AM35X_INTR_USB_MASK);
+
+	/* Force the DRVVBUS IRQ so we can start polling for ID change. */
+	musb_writel(reg_base, CORE_INTR_SRC_SET_REG,
+			AM35X_INTR_DRVVBUS << AM35X_INTR_USB_SHIFT);
+}
+
+/*
+ * am35x_musb_disable - disable HDRC and flush interrupts
+ */
+static void am35x_musb_disable(struct musb *musb)
+{
+	void __iomem *reg_base = musb->ctrl_base;
+
+	musb_writel(reg_base, CORE_INTR_MASK_CLEAR_REG, AM35X_INTR_USB_MASK);
+	musb_writel(reg_base, EP_INTR_MASK_CLEAR_REG,
+			 AM35X_TX_INTR_MASK | AM35X_RX_INTR_MASK);
+	musb_writel(reg_base, USB_END_OF_INTR_REG, 0);
+}
+
+#define portstate(stmt)		stmt
+
+static void am35x_musb_set_vbus(struct musb *musb, int is_on)
+{
+	WARN_ON(is_on && is_peripheral_active(musb));
+}
+
+#define	POLL_SECONDS	2
+
+static void otg_timer(struct timer_list *t)
+{
+	struct musb		*musb = from_timer(musb, t, dev_timer);
+	void __iomem		*mregs = musb->mregs;
+	u8			devctl;
+	unsigned long		flags;
+
+	/*
+	 * We poll because AM35x's won't expose several OTG-critical
+	 * status change events (from the transceiver) otherwise.
+	 */
+	devctl = musb_readb(mregs, MUSB_DEVCTL);
+	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
+		usb_otg_state_string(musb->xceiv->otg->state));
+
+	spin_lock_irqsave(&musb->lock, flags);
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_A_WAIT_BCON:
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE) {
+			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+			MUSB_DEV_MODE(musb);
+		} else {
+			musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+			MUSB_HST_MODE(musb);
+		}
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+		musb_writel(musb->ctrl_base, CORE_INTR_SRC_SET_REG,
+			    MUSB_INTR_VBUSERROR << AM35X_INTR_USB_SHIFT);
+		break;
+	case OTG_STATE_B_IDLE:
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE)
+			mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
+		else
+			musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+		break;
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout)
+{
+	static unsigned long last_timer;
+
+	if (timeout == 0)
+		timeout = jiffies + msecs_to_jiffies(3);
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || (musb->a_wait_bcon == 0 &&
+				musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)) {
+		dev_dbg(musb->controller, "%s active, deleting timer\n",
+			usb_otg_state_string(musb->xceiv->otg->state));
+		del_timer(&musb->dev_timer);
+		last_timer = jiffies;
+		return;
+	}
+
+	if (time_after(last_timer, timeout) && timer_pending(&musb->dev_timer)) {
+		dev_dbg(musb->controller, "Longer idle timer already pending, ignoring...\n");
+		return;
+	}
+	last_timer = timeout;
+
+	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
+		usb_otg_state_string(musb->xceiv->otg->state),
+		jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&musb->dev_timer, timeout);
+}
+
+static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
+{
+	struct musb  *musb = hci;
+	void __iomem *reg_base = musb->ctrl_base;
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
+	struct omap_musb_board_data *data = plat->board_data;
+	unsigned long flags;
+	irqreturn_t ret = IRQ_NONE;
+	u32 epintr, usbintr;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/* Get endpoint interrupts */
+	epintr = musb_readl(reg_base, EP_INTR_SRC_MASKED_REG);
+
+	if (epintr) {
+		musb_writel(reg_base, EP_INTR_SRC_CLEAR_REG, epintr);
+
+		musb->int_rx =
+			(epintr & AM35X_RX_INTR_MASK) >> AM35X_INTR_RX_SHIFT;
+		musb->int_tx =
+			(epintr & AM35X_TX_INTR_MASK) >> AM35X_INTR_TX_SHIFT;
+	}
+
+	/* Get usb core interrupts */
+	usbintr = musb_readl(reg_base, CORE_INTR_SRC_MASKED_REG);
+	if (!usbintr && !epintr)
+		goto eoi;
+
+	if (usbintr) {
+		musb_writel(reg_base, CORE_INTR_SRC_CLEAR_REG, usbintr);
+
+		musb->int_usb =
+			(usbintr & AM35X_INTR_USB_MASK) >> AM35X_INTR_USB_SHIFT;
+	}
+	/*
+	 * DRVVBUS IRQs are the only proxy we have (a very poor one!) for
+	 * AM35x's missing ID change IRQ.  We need an ID change IRQ to
+	 * switch appropriately between halves of the OTG state machine.
+	 * Managing DEVCTL.SESSION per Mentor docs requires that we know its
+	 * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
+	 * Also, DRVVBUS pulses for SRP (but not at 5V) ...
+	 */
+	if (usbintr & (AM35X_INTR_DRVVBUS << AM35X_INTR_USB_SHIFT)) {
+		int drvvbus = musb_readl(reg_base, USB_STAT_REG);
+		void __iomem *mregs = musb->mregs;
+		u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
+		int err;
+
+		err = musb->int_usb & MUSB_INTR_VBUSERROR;
+		if (err) {
+			/*
+			 * The Mentor core doesn't debounce VBUS as needed
+			 * to cope with device connect current spikes. This
+			 * means it's not uncommon for bus-powered devices
+			 * to get VBUS errors during enumeration.
+			 *
+			 * This is a workaround, but newer RTL from Mentor
+			 * seems to allow a better one: "re"-starting sessions
+			 * without waiting for VBUS to stop registering in
+			 * devctl.
+			 */
+			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
+			mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
+			WARNING("VBUS error workaround (delay coming)\n");
+		} else if (drvvbus) {
+			MUSB_HST_MODE(musb);
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+			portstate(musb->port1_status |= USB_PORT_STAT_POWER);
+			del_timer(&musb->dev_timer);
+		} else {
+			musb->is_active = 0;
+			MUSB_DEV_MODE(musb);
+			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+			portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
+		}
+
+		/* NOTE: this must complete power-on within 100 ms. */
+		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
+				drvvbus ? "on" : "off",
+				usb_otg_state_string(musb->xceiv->otg->state),
+				err ? " ERROR" : "",
+				devctl);
+		ret = IRQ_HANDLED;
+	}
+
+	/* Drop spurious RX and TX if device is disconnected */
+	if (musb->int_usb & MUSB_INTR_DISCONNECT) {
+		musb->int_tx = 0;
+		musb->int_rx = 0;
+	}
+
+	if (musb->int_tx || musb->int_rx || musb->int_usb)
+		ret |= musb_interrupt(musb);
+
+eoi:
+	/* EOI needs to be written for the IRQ to be re-asserted. */
+	if (ret == IRQ_HANDLED || epintr || usbintr) {
+		/* clear level interrupt */
+		if (data->clear_irq)
+			data->clear_irq();
+		/* write EOI */
+		musb_writel(reg_base, USB_END_OF_INTR_REG, 0);
+	}
+
+	/* Poll for ID change */
+	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
+		mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return ret;
+}
+
+static int am35x_musb_set_mode(struct musb *musb, u8 musb_mode)
+{
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
+	struct omap_musb_board_data *data = plat->board_data;
+	int     retval = 0;
+
+	if (data->set_mode)
+		data->set_mode(musb_mode);
+	else
+		retval = -EIO;
+
+	return retval;
+}
+
+static int am35x_musb_init(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
+	struct omap_musb_board_data *data = plat->board_data;
+	void __iomem *reg_base = musb->ctrl_base;
+	u32 rev;
+
+	musb->mregs += USB_MENTOR_CORE_OFFSET;
+
+	/* Returns zero if e.g. not clocked */
+	rev = musb_readl(reg_base, USB_REVISION_REG);
+	if (!rev)
+		return -ENODEV;
+
+	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv))
+		return -EPROBE_DEFER;
+
+	timer_setup(&musb->dev_timer, otg_timer, 0);
+
+	/* Reset the musb */
+	if (data->reset)
+		data->reset();
+
+	/* Reset the controller */
+	musb_writel(reg_base, USB_CTRL_REG, AM35X_SOFT_RESET_MASK);
+
+	/* Start the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(1);
+
+	msleep(5);
+
+	musb->isr = am35x_musb_interrupt;
+
+	/* clear level interrupt */
+	if (data->clear_irq)
+		data->clear_irq();
+
+	return 0;
+}
+
+static int am35x_musb_exit(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
+	struct omap_musb_board_data *data = plat->board_data;
+
+	del_timer_sync(&musb->dev_timer);
+
+	/* Shutdown the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(0);
+
+	usb_put_phy(musb->xceiv);
+
+	return 0;
+}
+
+/* AM35x supports only 32bit read operation */
+static void am35x_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+	void __iomem *fifo = hw_ep->fifo;
+	u32		val;
+	int		i;
+
+	/* Read for 32bit-aligned destination address */
+	if (likely((0x03 & (unsigned long) dst) == 0) && len >= 4) {
+		readsl(fifo, dst, len >> 2);
+		dst += len & ~0x03;
+		len &= 0x03;
+	}
+	/*
+	 * Now read the remaining 1 to 3 byte or complete length if
+	 * unaligned address.
+	 */
+	if (len > 4) {
+		for (i = 0; i < (len >> 2); i++) {
+			*(u32 *) dst = musb_readl(fifo, 0);
+			dst += 4;
+		}
+		len &= 0x03;
+	}
+	if (len > 0) {
+		val = musb_readl(fifo, 0);
+		memcpy(dst, &val, len);
+	}
+}
+
+static const struct musb_platform_ops am35x_ops = {
+	.quirks		= MUSB_DMA_INVENTRA | MUSB_INDEXED_EP,
+	.init		= am35x_musb_init,
+	.exit		= am35x_musb_exit,
+
+	.read_fifo	= am35x_read_fifo,
+#ifdef CONFIG_USB_INVENTRA_DMA
+	.dma_init	= musbhs_dma_controller_create,
+	.dma_exit	= musbhs_dma_controller_destroy,
+#endif
+	.enable		= am35x_musb_enable,
+	.disable	= am35x_musb_disable,
+
+	.set_mode	= am35x_musb_set_mode,
+	.try_idle	= am35x_musb_try_idle,
+
+	.set_vbus	= am35x_musb_set_vbus,
+};
+
+static const struct platform_device_info am35x_dev_info = {
+	.name		= "musb-hdrc",
+	.id		= PLATFORM_DEVID_AUTO,
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+static int am35x_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
+	struct platform_device		*musb;
+	struct am35x_glue		*glue;
+	struct platform_device_info	pinfo;
+	struct clk			*phy_clk;
+	struct clk			*clk;
+
+	int				ret = -ENOMEM;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		goto err0;
+
+	phy_clk = clk_get(&pdev->dev, "fck");
+	if (IS_ERR(phy_clk)) {
+		dev_err(&pdev->dev, "failed to get PHY clock\n");
+		ret = PTR_ERR(phy_clk);
+		goto err3;
+	}
+
+	clk = clk_get(&pdev->dev, "ick");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err4;
+	}
+
+	ret = clk_enable(phy_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable PHY clock\n");
+		goto err5;
+	}
+
+	ret = clk_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err6;
+	}
+
+	glue->dev			= &pdev->dev;
+	glue->phy_clk			= phy_clk;
+	glue->clk			= clk;
+
+	pdata->platform_ops		= &am35x_ops;
+
+	glue->phy = usb_phy_generic_register();
+	if (IS_ERR(glue->phy)) {
+		ret = PTR_ERR(glue->phy);
+		goto err7;
+	}
+	platform_set_drvdata(pdev, glue);
+
+	pinfo = am35x_dev_info;
+	pinfo.parent = &pdev->dev;
+	pinfo.res = pdev->resource;
+	pinfo.num_res = pdev->num_resources;
+	pinfo.data = pdata;
+	pinfo.size_data = sizeof(*pdata);
+	pinfo.fwnode = of_fwnode_handle(pdev->dev.of_node);
+	pinfo.of_node_reused = true;
+
+	glue->musb = musb = platform_device_register_full(&pinfo);
+	if (IS_ERR(musb)) {
+		ret = PTR_ERR(musb);
+		dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
+		goto err8;
+	}
+
+	return 0;
+
+err8:
+	usb_phy_generic_unregister(glue->phy);
+
+err7:
+	clk_disable(clk);
+
+err6:
+	clk_disable(phy_clk);
+
+err5:
+	clk_put(clk);
+
+err4:
+	clk_put(phy_clk);
+
+err3:
+	kfree(glue);
+
+err0:
+	return ret;
+}
+
+static int am35x_remove(struct platform_device *pdev)
+{
+	struct am35x_glue	*glue = platform_get_drvdata(pdev);
+
+	platform_device_unregister(glue->musb);
+	usb_phy_generic_unregister(glue->phy);
+	clk_disable(glue->clk);
+	clk_disable(glue->phy_clk);
+	clk_put(glue->clk);
+	clk_put(glue->phy_clk);
+	kfree(glue);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int am35x_suspend(struct device *dev)
+{
+	struct am35x_glue	*glue = dev_get_drvdata(dev);
+	struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
+	struct omap_musb_board_data *data = plat->board_data;
+
+	/* Shutdown the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(0);
+
+	clk_disable(glue->phy_clk);
+	clk_disable(glue->clk);
+
+	return 0;
+}
+
+static int am35x_resume(struct device *dev)
+{
+	struct am35x_glue	*glue = dev_get_drvdata(dev);
+	struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
+	struct omap_musb_board_data *data = plat->board_data;
+	int			ret;
+
+	/* Start the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(1);
+
+	ret = clk_enable(glue->phy_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable PHY clock\n");
+		return ret;
+	}
+
+	ret = clk_enable(glue->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable clock\n");
+		return ret;
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(am35x_pm_ops, am35x_suspend, am35x_resume);
+
+static struct platform_driver am35x_driver = {
+	.probe		= am35x_probe,
+	.remove		= am35x_remove,
+	.driver		= {
+		.name	= "musb-am35x",
+		.pm	= &am35x_pm_ops,
+	},
+};
+
+MODULE_DESCRIPTION("AM35x MUSB Glue Layer");
+MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>");
+MODULE_LICENSE("GPL v2");
+module_platform_driver(am35x_driver);
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
new file mode 100644
index 000000000..edb5b63d7
--- /dev/null
+++ b/drivers/usb/musb/cppi_dma.c
@@ -0,0 +1,1547 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * This file implements a DMA  interface using TI's CPPI DMA.
+ * For now it's DaVinci-only, but CPPI isn't specific to DaVinci or USB.
+ * The TUSB6020, using VLYNQ, has CPPI that looks much like DaVinci.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include "musb_core.h"
+#include "musb_debug.h"
+#include "cppi_dma.h"
+#include "davinci.h"
+
+
+/* CPPI DMA status 7-mar-2006:
+ *
+ * - See musb_{host,gadget}.c for more info
+ *
+ * - Correct RX DMA generally forces the engine into irq-per-packet mode,
+ *   which can easily saturate the CPU under non-mass-storage loads.
+ *
+ * NOTES 24-aug-2006 (2.6.18-rc4):
+ *
+ * - peripheral RXDMA wedged in a test with packets of length 512/512/1.
+ *   evidently after the 1 byte packet was received and acked, the queue
+ *   of BDs got garbaged so it wouldn't empty the fifo.  (rxcsr 0x2003,
+ *   and RX DMA0: 4 left, 80000000 8feff880, 8feff860 8feff860; 8f321401
+ *   004001ff 00000001 .. 8feff860)  Host was just getting NAKed on tx
+ *   of its next (512 byte) packet.  IRQ issues?
+ *
+ * REVISIT:  the "transfer DMA" glue between CPPI and USB fifos will
+ * evidently also directly update the RX and TX CSRs ... so audit all
+ * host and peripheral side DMA code to avoid CSR access after DMA has
+ * been started.
+ */
+
+/* REVISIT now we can avoid preallocating these descriptors; or
+ * more simply, switch to a global freelist not per-channel ones.
+ * Note: at full speed, 64 descriptors == 4K bulk data.
+ */
+#define NUM_TXCHAN_BD       64
+#define NUM_RXCHAN_BD       64
+
+static inline void cpu_drain_writebuffer(void)
+{
+	wmb();
+#ifdef	CONFIG_CPU_ARM926T
+	/* REVISIT this "should not be needed",
+	 * but lack of it sure seemed to hurt ...
+	 */
+	asm("mcr p15, 0, r0, c7, c10, 4 @ drain write buffer\n");
+#endif
+}
+
+static inline struct cppi_descriptor *cppi_bd_alloc(struct cppi_channel *c)
+{
+	struct cppi_descriptor	*bd = c->freelist;
+
+	if (bd)
+		c->freelist = bd->next;
+	return bd;
+}
+
+static inline void
+cppi_bd_free(struct cppi_channel *c, struct cppi_descriptor *bd)
+{
+	if (!bd)
+		return;
+	bd->next = c->freelist;
+	c->freelist = bd;
+}
+
+/*
+ *  Start DMA controller
+ *
+ *  Initialize the DMA controller as necessary.
+ */
+
+/* zero out entire rx state RAM entry for the channel */
+static void cppi_reset_rx(struct cppi_rx_stateram __iomem *rx)
+{
+	musb_writel(&rx->rx_skipbytes, 0, 0);
+	musb_writel(&rx->rx_head, 0, 0);
+	musb_writel(&rx->rx_sop, 0, 0);
+	musb_writel(&rx->rx_current, 0, 0);
+	musb_writel(&rx->rx_buf_current, 0, 0);
+	musb_writel(&rx->rx_len_len, 0, 0);
+	musb_writel(&rx->rx_cnt_cnt, 0, 0);
+}
+
+/* zero out entire tx state RAM entry for the channel */
+static void cppi_reset_tx(struct cppi_tx_stateram __iomem *tx, u32 ptr)
+{
+	musb_writel(&tx->tx_head, 0, 0);
+	musb_writel(&tx->tx_buf, 0, 0);
+	musb_writel(&tx->tx_current, 0, 0);
+	musb_writel(&tx->tx_buf_current, 0, 0);
+	musb_writel(&tx->tx_info, 0, 0);
+	musb_writel(&tx->tx_rem_len, 0, 0);
+	/* musb_writel(&tx->tx_dummy, 0, 0); */
+	musb_writel(&tx->tx_complete, 0, ptr);
+}
+
+static void cppi_pool_init(struct cppi *cppi, struct cppi_channel *c)
+{
+	int	j;
+
+	/* initialize channel fields */
+	c->head = NULL;
+	c->tail = NULL;
+	c->last_processed = NULL;
+	c->channel.status = MUSB_DMA_STATUS_UNKNOWN;
+	c->controller = cppi;
+	c->is_rndis = 0;
+	c->freelist = NULL;
+
+	/* build the BD Free list for the channel */
+	for (j = 0; j < NUM_TXCHAN_BD + 1; j++) {
+		struct cppi_descriptor	*bd;
+		dma_addr_t		dma;
+
+		bd = dma_pool_alloc(cppi->pool, GFP_KERNEL, &dma);
+		bd->dma = dma;
+		cppi_bd_free(c, bd);
+	}
+}
+
+static int cppi_channel_abort(struct dma_channel *);
+
+static void cppi_pool_free(struct cppi_channel *c)
+{
+	struct cppi		*cppi = c->controller;
+	struct cppi_descriptor	*bd;
+
+	(void) cppi_channel_abort(&c->channel);
+	c->channel.status = MUSB_DMA_STATUS_UNKNOWN;
+	c->controller = NULL;
+
+	/* free all its bds */
+	bd = c->last_processed;
+	do {
+		if (bd)
+			dma_pool_free(cppi->pool, bd, bd->dma);
+		bd = cppi_bd_alloc(c);
+	} while (bd);
+	c->last_processed = NULL;
+}
+
+static void cppi_controller_start(struct cppi *controller)
+{
+	void __iomem	*tibase;
+	int		i;
+
+	/* do whatever is necessary to start controller */
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+		controller->tx[i].transmit = true;
+		controller->tx[i].index = i;
+	}
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++) {
+		controller->rx[i].transmit = false;
+		controller->rx[i].index = i;
+	}
+
+	/* setup BD list on a per channel basis */
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++)
+		cppi_pool_init(controller, controller->tx + i);
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++)
+		cppi_pool_init(controller, controller->rx + i);
+
+	tibase =  controller->tibase;
+	INIT_LIST_HEAD(&controller->tx_complete);
+
+	/* initialise tx/rx channel head pointers to zero */
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+		struct cppi_channel	*tx_ch = controller->tx + i;
+		struct cppi_tx_stateram __iomem *tx;
+
+		INIT_LIST_HEAD(&tx_ch->tx_complete);
+
+		tx = tibase + DAVINCI_TXCPPI_STATERAM_OFFSET(i);
+		tx_ch->state_ram = tx;
+		cppi_reset_tx(tx, 0);
+	}
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++) {
+		struct cppi_channel	*rx_ch = controller->rx + i;
+		struct cppi_rx_stateram __iomem *rx;
+
+		INIT_LIST_HEAD(&rx_ch->tx_complete);
+
+		rx = tibase + DAVINCI_RXCPPI_STATERAM_OFFSET(i);
+		rx_ch->state_ram = rx;
+		cppi_reset_rx(rx);
+	}
+
+	/* enable individual cppi channels */
+	musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_INTENAB_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+
+	/* enable tx/rx CPPI control */
+	musb_writel(tibase, DAVINCI_TXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_ENABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_ENABLE);
+
+	/* disable RNDIS mode, also host rx RNDIS autorequest */
+	musb_writel(tibase, DAVINCI_RNDIS_REG, 0);
+	musb_writel(tibase, DAVINCI_AUTOREQ_REG, 0);
+}
+
+/*
+ *  Stop DMA controller
+ *
+ *  De-Init the DMA controller as necessary.
+ */
+
+static void cppi_controller_stop(struct cppi *controller)
+{
+	void __iomem		*tibase;
+	int			i;
+	struct musb		*musb;
+
+	musb = controller->controller.musb;
+
+	tibase = controller->tibase;
+	/* DISABLE INDIVIDUAL CHANNEL Interrupts */
+	musb_writel(tibase, DAVINCI_TXCPPI_INTCLR_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_INTCLR_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+
+	musb_dbg(musb, "Tearing down RX and TX Channels");
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+		/* FIXME restructure of txdma to use bds like rxdma */
+		controller->tx[i].last_processed = NULL;
+		cppi_pool_free(controller->tx + i);
+	}
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++)
+		cppi_pool_free(controller->rx + i);
+
+	/* in Tx Case proper teardown is supported. We resort to disabling
+	 * Tx/Rx CPPI after cleanup of Tx channels. Before TX teardown is
+	 * complete TX CPPI cannot be disabled.
+	 */
+	/*disable tx/rx cppi */
+	musb_writel(tibase, DAVINCI_TXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_DISABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_DISABLE);
+}
+
+/* While dma channel is allocated, we only want the core irqs active
+ * for fault reports, otherwise we'd get irqs that we don't care about.
+ * Except for TX irqs, where dma done != fifo empty and reusable ...
+ *
+ * NOTE: docs don't say either way, but irq masking **enables** irqs.
+ *
+ * REVISIT same issue applies to pure PIO usage too, and non-cppi dma...
+ */
+static inline void core_rxirq_disable(void __iomem *tibase, unsigned epnum)
+{
+	musb_writel(tibase, DAVINCI_USB_INT_MASK_CLR_REG, 1 << (epnum + 8));
+}
+
+static inline void core_rxirq_enable(void __iomem *tibase, unsigned epnum)
+{
+	musb_writel(tibase, DAVINCI_USB_INT_MASK_SET_REG, 1 << (epnum + 8));
+}
+
+
+/*
+ * Allocate a CPPI Channel for DMA.  With CPPI, channels are bound to
+ * each transfer direction of a non-control endpoint, so allocating
+ * (and deallocating) is mostly a way to notice bad housekeeping on
+ * the software side.  We assume the irqs are always active.
+ */
+static struct dma_channel *
+cppi_channel_allocate(struct dma_controller *c,
+		struct musb_hw_ep *ep, u8 transmit)
+{
+	struct cppi		*controller;
+	u8			index;
+	struct cppi_channel	*cppi_ch;
+	void __iomem		*tibase;
+	struct musb		*musb;
+
+	controller = container_of(c, struct cppi, controller);
+	tibase = controller->tibase;
+	musb = c->musb;
+
+	/* ep0 doesn't use DMA; remember cppi indices are 0..N-1 */
+	index = ep->epnum - 1;
+
+	/* return the corresponding CPPI Channel Handle, and
+	 * probably disable the non-CPPI irq until we need it.
+	 */
+	if (transmit) {
+		if (index >= ARRAY_SIZE(controller->tx)) {
+			musb_dbg(musb, "no %cX%d CPPI channel", 'T', index);
+			return NULL;
+		}
+		cppi_ch = controller->tx + index;
+	} else {
+		if (index >= ARRAY_SIZE(controller->rx)) {
+			musb_dbg(musb, "no %cX%d CPPI channel", 'R', index);
+			return NULL;
+		}
+		cppi_ch = controller->rx + index;
+		core_rxirq_disable(tibase, ep->epnum);
+	}
+
+	/* REVISIT make this an error later once the same driver code works
+	 * with the other DMA engine too
+	 */
+	if (cppi_ch->hw_ep)
+		musb_dbg(musb, "re-allocating DMA%d %cX channel %p",
+				index, transmit ? 'T' : 'R', cppi_ch);
+	cppi_ch->hw_ep = ep;
+	cppi_ch->channel.status = MUSB_DMA_STATUS_FREE;
+	cppi_ch->channel.max_len = 0x7fffffff;
+
+	musb_dbg(musb, "Allocate CPPI%d %cX", index, transmit ? 'T' : 'R');
+	return &cppi_ch->channel;
+}
+
+/* Release a CPPI Channel.  */
+static void cppi_channel_release(struct dma_channel *channel)
+{
+	struct cppi_channel	*c;
+	void __iomem		*tibase;
+
+	/* REVISIT:  for paranoia, check state and abort if needed... */
+
+	c = container_of(channel, struct cppi_channel, channel);
+	tibase = c->controller->tibase;
+	if (!c->hw_ep)
+		musb_dbg(c->controller->controller.musb,
+			"releasing idle DMA channel %p", c);
+	else if (!c->transmit)
+		core_rxirq_enable(tibase, c->index + 1);
+
+	/* for now, leave its cppi IRQ enabled (we won't trigger it) */
+	c->hw_ep = NULL;
+	channel->status = MUSB_DMA_STATUS_UNKNOWN;
+}
+
+/* Context: controller irqlocked */
+static void
+cppi_dump_rx(int level, struct cppi_channel *c, const char *tag)
+{
+	void __iomem			*base = c->controller->mregs;
+	struct cppi_rx_stateram __iomem	*rx = c->state_ram;
+
+	musb_ep_select(base, c->index + 1);
+
+	musb_dbg(c->controller->controller.musb,
+		"RX DMA%d%s: %d left, csr %04x, "
+		"%08x H%08x S%08x C%08x, "
+		"B%08x L%08x %08x .. %08x",
+		c->index, tag,
+		musb_readl(c->controller->tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + 4 * c->index),
+		musb_readw(c->hw_ep->regs, MUSB_RXCSR),
+
+		musb_readl(&rx->rx_skipbytes, 0),
+		musb_readl(&rx->rx_head, 0),
+		musb_readl(&rx->rx_sop, 0),
+		musb_readl(&rx->rx_current, 0),
+
+		musb_readl(&rx->rx_buf_current, 0),
+		musb_readl(&rx->rx_len_len, 0),
+		musb_readl(&rx->rx_cnt_cnt, 0),
+		musb_readl(&rx->rx_complete, 0)
+		);
+}
+
+/* Context: controller irqlocked */
+static void
+cppi_dump_tx(int level, struct cppi_channel *c, const char *tag)
+{
+	void __iomem			*base = c->controller->mregs;
+	struct cppi_tx_stateram __iomem	*tx = c->state_ram;
+
+	musb_ep_select(base, c->index + 1);
+
+	musb_dbg(c->controller->controller.musb,
+		"TX DMA%d%s: csr %04x, "
+		"H%08x S%08x C%08x %08x, "
+		"F%08x L%08x .. %08x",
+		c->index, tag,
+		musb_readw(c->hw_ep->regs, MUSB_TXCSR),
+
+		musb_readl(&tx->tx_head, 0),
+		musb_readl(&tx->tx_buf, 0),
+		musb_readl(&tx->tx_current, 0),
+		musb_readl(&tx->tx_buf_current, 0),
+
+		musb_readl(&tx->tx_info, 0),
+		musb_readl(&tx->tx_rem_len, 0),
+		/* dummy/unused word 6 */
+		musb_readl(&tx->tx_complete, 0)
+		);
+}
+
+/* Context: controller irqlocked */
+static inline void
+cppi_rndis_update(struct cppi_channel *c, int is_rx,
+		void __iomem *tibase, int is_rndis)
+{
+	/* we may need to change the rndis flag for this cppi channel */
+	if (c->is_rndis != is_rndis) {
+		u32	value = musb_readl(tibase, DAVINCI_RNDIS_REG);
+		u32	temp = 1 << (c->index);
+
+		if (is_rx)
+			temp <<= 16;
+		if (is_rndis)
+			value |= temp;
+		else
+			value &= ~temp;
+		musb_writel(tibase, DAVINCI_RNDIS_REG, value);
+		c->is_rndis = is_rndis;
+	}
+}
+
+static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
+{
+	pr_debug("RXBD/%s %08x: "
+			"nxt %08x buf %08x off.blen %08x opt.plen %08x\n",
+			tag, bd->dma,
+			bd->hw_next, bd->hw_bufp, bd->hw_off_len,
+			bd->hw_options);
+}
+
+static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx)
+{
+	struct cppi_descriptor	*bd;
+
+	cppi_dump_rx(level, rx, tag);
+	if (rx->last_processed)
+		cppi_dump_rxbd("last", rx->last_processed);
+	for (bd = rx->head; bd; bd = bd->next)
+		cppi_dump_rxbd("active", bd);
+}
+
+
+/* NOTE:  DaVinci autoreq is ignored except for host side "RNDIS" mode RX;
+ * so we won't ever use it (see "CPPI RX Woes" below).
+ */
+static inline int cppi_autoreq_update(struct cppi_channel *rx,
+		void __iomem *tibase, int onepacket, unsigned n_bds)
+{
+	u32	val;
+
+#ifdef	RNDIS_RX_IS_USABLE
+	u32	tmp;
+	/* assert(is_host_active(musb)) */
+
+	/* start from "AutoReq never" */
+	tmp = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+	val = tmp & ~((0x3) << (rx->index * 2));
+
+	/* HCD arranged reqpkt for packet #1.  we arrange int
+	 * for all but the last one, maybe in two segments.
+	 */
+	if (!onepacket) {
+#if 0
+		/* use two segments, autoreq "all" then the last "never" */
+		val |= ((0x3) << (rx->index * 2));
+		n_bds--;
+#else
+		/* one segment, autoreq "all-but-last" */
+		val |= ((0x1) << (rx->index * 2));
+#endif
+	}
+
+	if (val != tmp) {
+		int n = 100;
+
+		/* make sure that autoreq is updated before continuing */
+		musb_writel(tibase, DAVINCI_AUTOREQ_REG, val);
+		do {
+			tmp = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+			if (tmp == val)
+				break;
+			cpu_relax();
+		} while (n-- > 0);
+	}
+#endif
+
+	/* REQPKT is turned off after each segment */
+	if (n_bds && rx->channel.actual_len) {
+		void __iomem	*regs = rx->hw_ep->regs;
+
+		val = musb_readw(regs, MUSB_RXCSR);
+		if (!(val & MUSB_RXCSR_H_REQPKT)) {
+			val |= MUSB_RXCSR_H_REQPKT | MUSB_RXCSR_H_WZC_BITS;
+			musb_writew(regs, MUSB_RXCSR, val);
+			/* flush writebuffer */
+			val = musb_readw(regs, MUSB_RXCSR);
+		}
+	}
+	return n_bds;
+}
+
+
+/* Buffer enqueuing Logic:
+ *
+ *  - RX builds new queues each time, to help handle routine "early
+ *    termination" cases (faults, including errors and short reads)
+ *    more correctly.
+ *
+ *  - for now, TX reuses the same queue of BDs every time
+ *
+ * REVISIT long term, we want a normal dynamic model.
+ * ... the goal will be to append to the
+ * existing queue, processing completed "dma buffers" (segments) on the fly.
+ *
+ * Otherwise we force an IRQ latency between requests, which slows us a lot
+ * (especially in "transparent" dma).  Unfortunately that model seems to be
+ * inherent in the DMA model from the Mentor code, except in the rare case
+ * of transfers big enough (~128+ KB) that we could append "middle" segments
+ * in the TX paths.  (RX can't do this, see below.)
+ *
+ * That's true even in the CPPI- friendly iso case, where most urbs have
+ * several small segments provided in a group and where the "packet at a time"
+ * "transparent" DMA model is always correct, even on the RX side.
+ */
+
+/*
+ * CPPI TX:
+ * ========
+ * TX is a lot more reasonable than RX; it doesn't need to run in
+ * irq-per-packet mode very often.  RNDIS mode seems to behave too
+ * (except how it handles the exactly-N-packets case).  Building a
+ * txdma queue with multiple requests (urb or usb_request) looks
+ * like it would work ... but fault handling would need much testing.
+ *
+ * The main issue with TX mode RNDIS relates to transfer lengths that
+ * are an exact multiple of the packet length.  It appears that there's
+ * a hiccup in that case (maybe the DMA completes before the ZLP gets
+ * written?) boiling down to not being able to rely on CPPI writing any
+ * terminating zero length packet before the next transfer is written.
+ * So that's punted to PIO; better yet, gadget drivers can avoid it.
+ *
+ * Plus, there's allegedly an undocumented constraint that rndis transfer
+ * length be a multiple of 64 bytes ... but the chip doesn't act that
+ * way, and we really don't _want_ that behavior anyway.
+ *
+ * On TX, "transparent" mode works ... although experiments have shown
+ * problems trying to use the SOP/EOP bits in different USB packets.
+ *
+ * REVISIT try to handle terminating zero length packets using CPPI
+ * instead of doing it by PIO after an IRQ.  (Meanwhile, make Ethernet
+ * links avoid that issue by forcing them to avoid zlps.)
+ */
+static void
+cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx)
+{
+	unsigned		maxpacket = tx->maxpacket;
+	dma_addr_t		addr = tx->buf_dma + tx->offset;
+	size_t			length = tx->buf_len - tx->offset;
+	struct cppi_descriptor	*bd;
+	unsigned		n_bds;
+	unsigned		i;
+	struct cppi_tx_stateram	__iomem *tx_ram = tx->state_ram;
+	int			rndis;
+
+	/* TX can use the CPPI "rndis" mode, where we can probably fit this
+	 * transfer in one BD and one IRQ.  The only time we would NOT want
+	 * to use it is when hardware constraints prevent it, or if we'd
+	 * trigger the "send a ZLP?" confusion.
+	 */
+	rndis = (maxpacket & 0x3f) == 0
+		&& length > maxpacket
+		&& length < 0xffff
+		&& (length % maxpacket) != 0;
+
+	if (rndis) {
+		maxpacket = length;
+		n_bds = 1;
+	} else {
+		if (length)
+			n_bds = DIV_ROUND_UP(length, maxpacket);
+		else
+			n_bds = 1;
+		n_bds = min(n_bds, (unsigned) NUM_TXCHAN_BD);
+		length = min(n_bds * maxpacket, length);
+	}
+
+	musb_dbg(musb, "TX DMA%d, pktSz %d %s bds %d dma 0x%llx len %u",
+			tx->index,
+			maxpacket,
+			rndis ? "rndis" : "transparent",
+			n_bds,
+			(unsigned long long)addr, length);
+
+	cppi_rndis_update(tx, 0, musb->ctrl_base, rndis);
+
+	/* assuming here that channel_program is called during
+	 * transfer initiation ... current code maintains state
+	 * for one outstanding request only (no queues, not even
+	 * the implicit ones of an iso urb).
+	 */
+
+	bd = tx->freelist;
+	tx->head = bd;
+	tx->last_processed = NULL;
+
+	/* FIXME use BD pool like RX side does, and just queue
+	 * the minimum number for this request.
+	 */
+
+	/* Prepare queue of BDs first, then hand it to hardware.
+	 * All BDs except maybe the last should be of full packet
+	 * size; for RNDIS there _is_ only that last packet.
+	 */
+	for (i = 0; i < n_bds; ) {
+		if (++i < n_bds && bd->next)
+			bd->hw_next = bd->next->dma;
+		else
+			bd->hw_next = 0;
+
+		bd->hw_bufp = tx->buf_dma + tx->offset;
+
+		/* FIXME set EOP only on the last packet,
+		 * SOP only on the first ... avoid IRQs
+		 */
+		if ((tx->offset + maxpacket) <= tx->buf_len) {
+			tx->offset += maxpacket;
+			bd->hw_off_len = maxpacket;
+			bd->hw_options = CPPI_SOP_SET | CPPI_EOP_SET
+				| CPPI_OWN_SET | maxpacket;
+		} else {
+			/* only this one may be a partial USB Packet */
+			u32		partial_len;
+
+			partial_len = tx->buf_len - tx->offset;
+			tx->offset = tx->buf_len;
+			bd->hw_off_len = partial_len;
+
+			bd->hw_options = CPPI_SOP_SET | CPPI_EOP_SET
+				| CPPI_OWN_SET | partial_len;
+			if (partial_len == 0)
+				bd->hw_options |= CPPI_ZERO_SET;
+		}
+
+		musb_dbg(musb, "TXBD %p: nxt %08x buf %08x len %04x opt %08x",
+				bd, bd->hw_next, bd->hw_bufp,
+				bd->hw_off_len, bd->hw_options);
+
+		/* update the last BD enqueued to the list */
+		tx->tail = bd;
+		bd = bd->next;
+	}
+
+	/* BDs live in DMA-coherent memory, but writes might be pending */
+	cpu_drain_writebuffer();
+
+	/* Write to the HeadPtr in state RAM to trigger */
+	musb_writel(&tx_ram->tx_head, 0, (u32)tx->freelist->dma);
+
+	cppi_dump_tx(5, tx, "/S");
+}
+
+/*
+ * CPPI RX Woes:
+ * =============
+ * Consider a 1KB bulk RX buffer in two scenarios:  (a) it's fed two 300 byte
+ * packets back-to-back, and (b) it's fed two 512 byte packets back-to-back.
+ * (Full speed transfers have similar scenarios.)
+ *
+ * The correct behavior for Linux is that (a) fills the buffer with 300 bytes,
+ * and the next packet goes into a buffer that's queued later; while (b) fills
+ * the buffer with 1024 bytes.  How to do that with CPPI?
+ *
+ * - RX queues in "rndis" mode -- one single BD -- handle (a) correctly, but
+ *   (b) loses **BADLY** because nothing (!) happens when that second packet
+ *   fills the buffer, much less when a third one arrives.  (Which makes this
+ *   not a "true" RNDIS mode.  In the RNDIS protocol short-packet termination
+ *   is optional, and it's fine if peripherals -- not hosts! -- pad messages
+ *   out to end-of-buffer.  Standard PCI host controller DMA descriptors
+ *   implement that mode by default ... which is no accident.)
+ *
+ * - RX queues in "transparent" mode -- two BDs with 512 bytes each -- have
+ *   converse problems:  (b) is handled right, but (a) loses badly.  CPPI RX
+ *   ignores SOP/EOP markings and processes both of those BDs; so both packets
+ *   are loaded into the buffer (with a 212 byte gap between them), and the next
+ *   buffer queued will NOT get its 300 bytes of data. (It seems like SOP/EOP
+ *   are intended as outputs for RX queues, not inputs...)
+ *
+ * - A variant of "transparent" mode -- one BD at a time -- is the only way to
+ *   reliably make both cases work, with software handling both cases correctly
+ *   and at the significant penalty of needing an IRQ per packet.  (The lack of
+ *   I/O overlap can be slightly ameliorated by enabling double buffering.)
+ *
+ * So how to get rid of IRQ-per-packet?  The transparent multi-BD case could
+ * be used in special cases like mass storage, which sets URB_SHORT_NOT_OK
+ * (or maybe its peripheral side counterpart) to flag (a) scenarios as errors
+ * with guaranteed driver level fault recovery and scrubbing out what's left
+ * of that garbaged datastream.
+ *
+ * But there seems to be no way to identify the cases where CPPI RNDIS mode
+ * is appropriate -- which do NOT include RNDIS host drivers, but do include
+ * the CDC Ethernet driver! -- and the documentation is incomplete/wrong.
+ * So we can't _ever_ use RX RNDIS mode ... except by using a heuristic
+ * that applies best on the peripheral side (and which could fail rudely).
+ *
+ * Leaving only "transparent" mode; we avoid multi-bd modes in almost all
+ * cases other than mass storage class.  Otherwise we're correct but slow,
+ * since CPPI penalizes our need for a "true RNDIS" default mode.
+ */
+
+
+/* Heuristic, intended to kick in for ethernet/rndis peripheral ONLY
+ *
+ * IFF
+ *  (a)	peripheral mode ... since rndis peripherals could pad their
+ *	writes to hosts, causing i/o failure; or we'd have to cope with
+ *	a largely unknowable variety of host side protocol variants
+ *  (b)	and short reads are NOT errors ... since full reads would
+ *	cause those same i/o failures
+ *  (c)	and read length is
+ *	- less than 64KB (max per cppi descriptor)
+ *	- not a multiple of 4096 (g_zero default, full reads typical)
+ *	- N (>1) packets long, ditto (full reads not EXPECTED)
+ * THEN
+ *   try rx rndis mode
+ *
+ * Cost of heuristic failing:  RXDMA wedges at the end of transfers that
+ * fill out the whole buffer.  Buggy host side usb network drivers could
+ * trigger that, but "in the field" such bugs seem to be all but unknown.
+ *
+ * So this module parameter lets the heuristic be disabled.  When using
+ * gadgetfs, the heuristic will probably need to be disabled.
+ */
+static bool cppi_rx_rndis = 1;
+
+module_param(cppi_rx_rndis, bool, 0);
+MODULE_PARM_DESC(cppi_rx_rndis, "enable/disable RX RNDIS heuristic");
+
+
+/**
+ * cppi_next_rx_segment - dma read for the next chunk of a buffer
+ * @musb: the controller
+ * @rx: dma channel
+ * @onepacket: true unless caller treats short reads as errors, and
+ *	performs fault recovery above usbcore.
+ * Context: controller irqlocked
+ *
+ * See above notes about why we can't use multi-BD RX queues except in
+ * rare cases (mass storage class), and can never use the hardware "rndis"
+ * mode (since it's not a "true" RNDIS mode) with complete safety..
+ *
+ * It's ESSENTIAL that callers specify "onepacket" mode unless they kick in
+ * code to recover from corrupted datastreams after each short transfer.
+ */
+static void
+cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
+{
+	unsigned		maxpacket = rx->maxpacket;
+	dma_addr_t		addr = rx->buf_dma + rx->offset;
+	size_t			length = rx->buf_len - rx->offset;
+	struct cppi_descriptor	*bd, *tail;
+	unsigned		n_bds;
+	unsigned		i;
+	void __iomem		*tibase = musb->ctrl_base;
+	int			is_rndis = 0;
+	struct cppi_rx_stateram	__iomem *rx_ram = rx->state_ram;
+	struct cppi_descriptor	*d;
+
+	if (onepacket) {
+		/* almost every USB driver, host or peripheral side */
+		n_bds = 1;
+
+		/* maybe apply the heuristic above */
+		if (cppi_rx_rndis
+				&& is_peripheral_active(musb)
+				&& length > maxpacket
+				&& (length & ~0xffff) == 0
+				&& (length & 0x0fff) != 0
+				&& (length & (maxpacket - 1)) == 0) {
+			maxpacket = length;
+			is_rndis = 1;
+		}
+	} else {
+		/* virtually nothing except mass storage class */
+		if (length > 0xffff) {
+			n_bds = 0xffff / maxpacket;
+			length = n_bds * maxpacket;
+		} else {
+			n_bds = DIV_ROUND_UP(length, maxpacket);
+		}
+		if (n_bds == 1)
+			onepacket = 1;
+		else
+			n_bds = min(n_bds, (unsigned) NUM_RXCHAN_BD);
+	}
+
+	/* In host mode, autorequest logic can generate some IN tokens; it's
+	 * tricky since we can't leave REQPKT set in RXCSR after the transfer
+	 * finishes. So:  multipacket transfers involve two or more segments.
+	 * And always at least two IRQs ... RNDIS mode is not an option.
+	 */
+	if (is_host_active(musb))
+		n_bds = cppi_autoreq_update(rx, tibase, onepacket, n_bds);
+
+	cppi_rndis_update(rx, 1, musb->ctrl_base, is_rndis);
+
+	length = min(n_bds * maxpacket, length);
+
+	musb_dbg(musb, "RX DMA%d seg, maxp %d %s bds %d (cnt %d) "
+			"dma 0x%llx len %u %u/%u",
+			rx->index, maxpacket,
+			onepacket
+				? (is_rndis ? "rndis" : "onepacket")
+				: "multipacket",
+			n_bds,
+			musb_readl(tibase,
+				DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+					& 0xffff,
+			(unsigned long long)addr, length,
+			rx->channel.actual_len, rx->buf_len);
+
+	/* only queue one segment at a time, since the hardware prevents
+	 * correct queue shutdown after unexpected short packets
+	 */
+	bd = cppi_bd_alloc(rx);
+	rx->head = bd;
+
+	/* Build BDs for all packets in this segment */
+	for (i = 0, tail = NULL; bd && i < n_bds; i++, tail = bd) {
+		u32	bd_len;
+
+		if (i) {
+			bd = cppi_bd_alloc(rx);
+			if (!bd)
+				break;
+			tail->next = bd;
+			tail->hw_next = bd->dma;
+		}
+		bd->hw_next = 0;
+
+		/* all but the last packet will be maxpacket size */
+		if (maxpacket < length)
+			bd_len = maxpacket;
+		else
+			bd_len = length;
+
+		bd->hw_bufp = addr;
+		addr += bd_len;
+		rx->offset += bd_len;
+
+		bd->hw_off_len = (0 /*offset*/ << 16) + bd_len;
+		bd->buflen = bd_len;
+
+		bd->hw_options = CPPI_OWN_SET | (i == 0 ? length : 0);
+		length -= bd_len;
+	}
+
+	/* we always expect at least one reusable BD! */
+	if (!tail) {
+		WARNING("rx dma%d -- no BDs? need %d\n", rx->index, n_bds);
+		return;
+	} else if (i < n_bds)
+		WARNING("rx dma%d -- only %d of %d BDs\n", rx->index, i, n_bds);
+
+	tail->next = NULL;
+	tail->hw_next = 0;
+
+	bd = rx->head;
+	rx->tail = tail;
+
+	/* short reads and other faults should terminate this entire
+	 * dma segment.  we want one "dma packet" per dma segment, not
+	 * one per USB packet, terminating the whole queue at once...
+	 * NOTE that current hardware seems to ignore SOP and EOP.
+	 */
+	bd->hw_options |= CPPI_SOP_SET;
+	tail->hw_options |= CPPI_EOP_SET;
+
+	for (d = rx->head; d; d = d->next)
+		cppi_dump_rxbd("S", d);
+
+	/* in case the preceding transfer left some state... */
+	tail = rx->last_processed;
+	if (tail) {
+		tail->next = bd;
+		tail->hw_next = bd->dma;
+	}
+
+	core_rxirq_enable(tibase, rx->index + 1);
+
+	/* BDs live in DMA-coherent memory, but writes might be pending */
+	cpu_drain_writebuffer();
+
+	/* REVISIT specs say to write this AFTER the BUFCNT register
+	 * below ... but that loses badly.
+	 */
+	musb_writel(&rx_ram->rx_head, 0, bd->dma);
+
+	/* bufferCount must be at least 3, and zeroes on completion
+	 * unless it underflows below zero, or stops at two, or keeps
+	 * growing ... grr.
+	 */
+	i = musb_readl(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+			& 0xffff;
+
+	if (!i)
+		musb_writel(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+			n_bds + 2);
+	else if (n_bds > (i - 3))
+		musb_writel(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+			n_bds - (i - 3));
+
+	i = musb_readl(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+			& 0xffff;
+	if (i < (2 + n_bds)) {
+		musb_dbg(musb, "bufcnt%d underrun - %d (for %d)",
+					rx->index, i, n_bds);
+		musb_writel(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+			n_bds + 2);
+	}
+
+	cppi_dump_rx(4, rx, "/S");
+}
+
+/**
+ * cppi_channel_program - program channel for data transfer
+ * @ch: the channel
+ * @maxpacket: max packet size
+ * @mode: For RX, 1 unless the usb protocol driver promised to treat
+ *	all short reads as errors and kick in high level fault recovery.
+ *	For TX, ignored because of RNDIS mode races/glitches.
+ * @dma_addr: dma address of buffer
+ * @len: length of buffer
+ * Context: controller irqlocked
+ */
+static int cppi_channel_program(struct dma_channel *ch,
+		u16 maxpacket, u8 mode,
+		dma_addr_t dma_addr, u32 len)
+{
+	struct cppi_channel	*cppi_ch;
+	struct cppi		*controller;
+	struct musb		*musb;
+
+	cppi_ch = container_of(ch, struct cppi_channel, channel);
+	controller = cppi_ch->controller;
+	musb = controller->controller.musb;
+
+	switch (ch->status) {
+	case MUSB_DMA_STATUS_BUS_ABORT:
+	case MUSB_DMA_STATUS_CORE_ABORT:
+		/* fault irq handler should have handled cleanup */
+		WARNING("%cX DMA%d not cleaned up after abort!\n",
+				cppi_ch->transmit ? 'T' : 'R',
+				cppi_ch->index);
+		/* WARN_ON(1); */
+		break;
+	case MUSB_DMA_STATUS_BUSY:
+		WARNING("program active channel?  %cX DMA%d\n",
+				cppi_ch->transmit ? 'T' : 'R',
+				cppi_ch->index);
+		/* WARN_ON(1); */
+		break;
+	case MUSB_DMA_STATUS_UNKNOWN:
+		musb_dbg(musb, "%cX DMA%d not allocated!",
+				cppi_ch->transmit ? 'T' : 'R',
+				cppi_ch->index);
+		fallthrough;
+	case MUSB_DMA_STATUS_FREE:
+		break;
+	}
+
+	ch->status = MUSB_DMA_STATUS_BUSY;
+
+	/* set transfer parameters, then queue up its first segment */
+	cppi_ch->buf_dma = dma_addr;
+	cppi_ch->offset = 0;
+	cppi_ch->maxpacket = maxpacket;
+	cppi_ch->buf_len = len;
+	cppi_ch->channel.actual_len = 0;
+
+	/* TX channel? or RX? */
+	if (cppi_ch->transmit)
+		cppi_next_tx_segment(musb, cppi_ch);
+	else
+		cppi_next_rx_segment(musb, cppi_ch, mode);
+
+	return true;
+}
+
+static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
+{
+	struct cppi_channel		*rx = &cppi->rx[ch];
+	struct cppi_rx_stateram __iomem	*state = rx->state_ram;
+	struct cppi_descriptor		*bd;
+	struct cppi_descriptor		*last = rx->last_processed;
+	bool				completed = false;
+	bool				acked = false;
+	int				i;
+	dma_addr_t			safe2ack;
+	void __iomem			*regs = rx->hw_ep->regs;
+	struct musb			*musb = cppi->controller.musb;
+
+	cppi_dump_rx(6, rx, "/K");
+
+	bd = last ? last->next : rx->head;
+	if (!bd)
+		return false;
+
+	/* run through all completed BDs */
+	for (i = 0, safe2ack = musb_readl(&state->rx_complete, 0);
+			(safe2ack || completed) && bd && i < NUM_RXCHAN_BD;
+			i++, bd = bd->next) {
+		u16	len;
+
+		/* catch latest BD writes from CPPI */
+		rmb();
+		if (!completed && (bd->hw_options & CPPI_OWN_SET))
+			break;
+
+		musb_dbg(musb, "C/RXBD %llx: nxt %08x buf %08x "
+			"off.len %08x opt.len %08x (%d)",
+			(unsigned long long)bd->dma, bd->hw_next, bd->hw_bufp,
+			bd->hw_off_len, bd->hw_options,
+			rx->channel.actual_len);
+
+		/* actual packet received length */
+		if ((bd->hw_options & CPPI_SOP_SET) && !completed)
+			len = bd->hw_off_len & CPPI_RECV_PKTLEN_MASK;
+		else
+			len = 0;
+
+		if (bd->hw_options & CPPI_EOQ_MASK)
+			completed = true;
+
+		if (!completed && len < bd->buflen) {
+			/* NOTE:  when we get a short packet, RXCSR_H_REQPKT
+			 * must have been cleared, and no more DMA packets may
+			 * active be in the queue... TI docs didn't say, but
+			 * CPPI ignores those BDs even though OWN is still set.
+			 */
+			completed = true;
+			musb_dbg(musb, "rx short %d/%d (%d)",
+					len, bd->buflen,
+					rx->channel.actual_len);
+		}
+
+		/* If we got here, we expect to ack at least one BD; meanwhile
+		 * CPPI may completing other BDs while we scan this list...
+		 *
+		 * RACE: we can notice OWN cleared before CPPI raises the
+		 * matching irq by writing that BD as the completion pointer.
+		 * In such cases, stop scanning and wait for the irq, avoiding
+		 * lost acks and states where BD ownership is unclear.
+		 */
+		if (bd->dma == safe2ack) {
+			musb_writel(&state->rx_complete, 0, safe2ack);
+			safe2ack = musb_readl(&state->rx_complete, 0);
+			acked = true;
+			if (bd->dma == safe2ack)
+				safe2ack = 0;
+		}
+
+		rx->channel.actual_len += len;
+
+		cppi_bd_free(rx, last);
+		last = bd;
+
+		/* stop scanning on end-of-segment */
+		if (bd->hw_next == 0)
+			completed = true;
+	}
+	rx->last_processed = last;
+
+	/* dma abort, lost ack, or ... */
+	if (!acked && last) {
+		int	csr;
+
+		if (safe2ack == 0 || safe2ack == rx->last_processed->dma)
+			musb_writel(&state->rx_complete, 0, safe2ack);
+		if (safe2ack == 0) {
+			cppi_bd_free(rx, last);
+			rx->last_processed = NULL;
+
+			/* if we land here on the host side, H_REQPKT will
+			 * be clear and we need to restart the queue...
+			 */
+			WARN_ON(rx->head);
+		}
+		musb_ep_select(cppi->mregs, rx->index + 1);
+		csr = musb_readw(regs, MUSB_RXCSR);
+		if (csr & MUSB_RXCSR_DMAENAB) {
+			musb_dbg(musb, "list%d %p/%p, last %llx%s, csr %04x",
+				rx->index,
+				rx->head, rx->tail,
+				rx->last_processed
+					? (unsigned long long)
+						rx->last_processed->dma
+					: 0,
+				completed ? ", completed" : "",
+				csr);
+			cppi_dump_rxq(4, "/what?", rx);
+		}
+	}
+	if (!completed) {
+		int	csr;
+
+		rx->head = bd;
+
+		/* REVISIT seems like "autoreq all but EOP" doesn't...
+		 * setting it here "should" be racey, but seems to work
+		 */
+		csr = musb_readw(rx->hw_ep->regs, MUSB_RXCSR);
+		if (is_host_active(cppi->controller.musb)
+				&& bd
+				&& !(csr & MUSB_RXCSR_H_REQPKT)) {
+			csr |= MUSB_RXCSR_H_REQPKT;
+			musb_writew(regs, MUSB_RXCSR,
+					MUSB_RXCSR_H_WZC_BITS | csr);
+			csr = musb_readw(rx->hw_ep->regs, MUSB_RXCSR);
+		}
+	} else {
+		rx->head = NULL;
+		rx->tail = NULL;
+	}
+
+	cppi_dump_rx(6, rx, completed ? "/completed" : "/cleaned");
+	return completed;
+}
+
+irqreturn_t cppi_interrupt(int irq, void *dev_id)
+{
+	struct musb		*musb = dev_id;
+	struct cppi		*cppi;
+	void __iomem		*tibase;
+	struct musb_hw_ep	*hw_ep = NULL;
+	u32			rx, tx;
+	int			i, index;
+	unsigned long		flags;
+
+	cppi = container_of(musb->dma_controller, struct cppi, controller);
+	if (cppi->irq)
+		spin_lock_irqsave(&musb->lock, flags);
+
+	tibase = musb->ctrl_base;
+
+	tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
+	rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
+
+	if (!tx && !rx) {
+		if (cppi->irq)
+			spin_unlock_irqrestore(&musb->lock, flags);
+		return IRQ_NONE;
+	}
+
+	musb_dbg(musb, "CPPI IRQ Tx%x Rx%x", tx, rx);
+
+	/* process TX channels */
+	for (index = 0; tx; tx = tx >> 1, index++) {
+		struct cppi_channel		*tx_ch;
+		struct cppi_tx_stateram __iomem	*tx_ram;
+		bool				completed = false;
+		struct cppi_descriptor		*bd;
+
+		if (!(tx & 1))
+			continue;
+
+		tx_ch = cppi->tx + index;
+		tx_ram = tx_ch->state_ram;
+
+		/* FIXME  need a cppi_tx_scan() routine, which
+		 * can also be called from abort code
+		 */
+
+		cppi_dump_tx(5, tx_ch, "/E");
+
+		bd = tx_ch->head;
+
+		/*
+		 * If Head is null then this could mean that a abort interrupt
+		 * that needs to be acknowledged.
+		 */
+		if (NULL == bd) {
+			musb_dbg(musb, "null BD");
+			musb_writel(&tx_ram->tx_complete, 0, 0);
+			continue;
+		}
+
+		/* run through all completed BDs */
+		for (i = 0; !completed && bd && i < NUM_TXCHAN_BD;
+				i++, bd = bd->next) {
+			u16	len;
+
+			/* catch latest BD writes from CPPI */
+			rmb();
+			if (bd->hw_options & CPPI_OWN_SET)
+				break;
+
+			musb_dbg(musb, "C/TXBD %p n %x b %x off %x opt %x",
+					bd, bd->hw_next, bd->hw_bufp,
+					bd->hw_off_len, bd->hw_options);
+
+			len = bd->hw_off_len & CPPI_BUFFER_LEN_MASK;
+			tx_ch->channel.actual_len += len;
+
+			tx_ch->last_processed = bd;
+
+			/* write completion register to acknowledge
+			 * processing of completed BDs, and possibly
+			 * release the IRQ; EOQ might not be set ...
+			 *
+			 * REVISIT use the same ack strategy as rx
+			 *
+			 * REVISIT have observed bit 18 set; huh??
+			 */
+			/* if ((bd->hw_options & CPPI_EOQ_MASK)) */
+				musb_writel(&tx_ram->tx_complete, 0, bd->dma);
+
+			/* stop scanning on end-of-segment */
+			if (bd->hw_next == 0)
+				completed = true;
+		}
+
+		/* on end of segment, maybe go to next one */
+		if (completed) {
+			/* cppi_dump_tx(4, tx_ch, "/complete"); */
+
+			/* transfer more, or report completion */
+			if (tx_ch->offset >= tx_ch->buf_len) {
+				tx_ch->head = NULL;
+				tx_ch->tail = NULL;
+				tx_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+				hw_ep = tx_ch->hw_ep;
+
+				musb_dma_completion(musb, index + 1, 1);
+
+			} else {
+				/* Bigger transfer than we could fit in
+				 * that first batch of descriptors...
+				 */
+				cppi_next_tx_segment(musb, tx_ch);
+			}
+		} else
+			tx_ch->head = bd;
+	}
+
+	/* Start processing the RX block */
+	for (index = 0; rx; rx = rx >> 1, index++) {
+
+		if (rx & 1) {
+			struct cppi_channel		*rx_ch;
+
+			rx_ch = cppi->rx + index;
+
+			/* let incomplete dma segments finish */
+			if (!cppi_rx_scan(cppi, index))
+				continue;
+
+			/* start another dma segment if needed */
+			if (rx_ch->channel.actual_len != rx_ch->buf_len
+					&& rx_ch->channel.actual_len
+						== rx_ch->offset) {
+				cppi_next_rx_segment(musb, rx_ch, 1);
+				continue;
+			}
+
+			/* all segments completed! */
+			rx_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+			hw_ep = rx_ch->hw_ep;
+
+			core_rxirq_disable(tibase, index + 1);
+			musb_dma_completion(musb, index + 1, 0);
+		}
+	}
+
+	/* write to CPPI EOI register to re-enable interrupts */
+	musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0);
+
+	if (cppi->irq)
+		spin_unlock_irqrestore(&musb->lock, flags);
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL_GPL(cppi_interrupt);
+
+/* Instantiate a software object representing a DMA controller. */
+struct dma_controller *
+cppi_dma_controller_create(struct musb *musb, void __iomem *mregs)
+{
+	struct cppi		*controller;
+	struct device		*dev = musb->controller;
+	struct platform_device	*pdev = to_platform_device(dev);
+	int			irq = platform_get_irq_byname(pdev, "dma");
+
+	controller = kzalloc(sizeof *controller, GFP_KERNEL);
+	if (!controller)
+		return NULL;
+
+	controller->mregs = mregs;
+	controller->tibase = mregs - DAVINCI_BASE_OFFSET;
+
+	controller->controller.musb = musb;
+	controller->controller.channel_alloc = cppi_channel_allocate;
+	controller->controller.channel_release = cppi_channel_release;
+	controller->controller.channel_program = cppi_channel_program;
+	controller->controller.channel_abort = cppi_channel_abort;
+
+	/* NOTE: allocating from on-chip SRAM would give the least
+	 * contention for memory access, if that ever matters here.
+	 */
+
+	/* setup BufferPool */
+	controller->pool = dma_pool_create("cppi",
+			controller->controller.musb->controller,
+			sizeof(struct cppi_descriptor),
+			CPPI_DESCRIPTOR_ALIGN, 0);
+	if (!controller->pool) {
+		kfree(controller);
+		return NULL;
+	}
+
+	if (irq > 0) {
+		if (request_irq(irq, cppi_interrupt, 0, "cppi-dma", musb)) {
+			dev_err(dev, "request_irq %d failed!\n", irq);
+			musb_dma_controller_destroy(&controller->controller);
+			return NULL;
+		}
+		controller->irq = irq;
+	}
+
+	cppi_controller_start(controller);
+	return &controller->controller;
+}
+EXPORT_SYMBOL_GPL(cppi_dma_controller_create);
+
+/*
+ *  Destroy a previously-instantiated DMA controller.
+ */
+void cppi_dma_controller_destroy(struct dma_controller *c)
+{
+	struct cppi	*cppi;
+
+	cppi = container_of(c, struct cppi, controller);
+
+	cppi_controller_stop(cppi);
+
+	if (cppi->irq)
+		free_irq(cppi->irq, cppi->controller.musb);
+
+	/* assert:  caller stopped the controller first */
+	dma_pool_destroy(cppi->pool);
+
+	kfree(cppi);
+}
+EXPORT_SYMBOL_GPL(cppi_dma_controller_destroy);
+
+/*
+ * Context: controller irqlocked, endpoint selected
+ */
+static int cppi_channel_abort(struct dma_channel *channel)
+{
+	struct cppi_channel	*cppi_ch;
+	struct cppi		*controller;
+	void __iomem		*mbase;
+	void __iomem		*tibase;
+	void __iomem		*regs;
+	u32			value;
+	struct cppi_descriptor	*queue;
+
+	cppi_ch = container_of(channel, struct cppi_channel, channel);
+
+	controller = cppi_ch->controller;
+
+	switch (channel->status) {
+	case MUSB_DMA_STATUS_BUS_ABORT:
+	case MUSB_DMA_STATUS_CORE_ABORT:
+		/* from RX or TX fault irq handler */
+	case MUSB_DMA_STATUS_BUSY:
+		/* the hardware needs shutting down */
+		regs = cppi_ch->hw_ep->regs;
+		break;
+	case MUSB_DMA_STATUS_UNKNOWN:
+	case MUSB_DMA_STATUS_FREE:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+
+	if (!cppi_ch->transmit && cppi_ch->head)
+		cppi_dump_rxq(3, "/abort", cppi_ch);
+
+	mbase = controller->mregs;
+	tibase = controller->tibase;
+
+	queue = cppi_ch->head;
+	cppi_ch->head = NULL;
+	cppi_ch->tail = NULL;
+
+	/* REVISIT should rely on caller having done this,
+	 * and caller should rely on us not changing it.
+	 * peripheral code is safe ... check host too.
+	 */
+	musb_ep_select(mbase, cppi_ch->index + 1);
+
+	if (cppi_ch->transmit) {
+		struct cppi_tx_stateram __iomem *tx_ram;
+		/* REVISIT put timeouts on these controller handshakes */
+
+		cppi_dump_tx(6, cppi_ch, " (teardown)");
+
+		/* teardown DMA engine then usb core */
+		do {
+			value = musb_readl(tibase, DAVINCI_TXCPPI_TEAR_REG);
+		} while (!(value & CPPI_TEAR_READY));
+		musb_writel(tibase, DAVINCI_TXCPPI_TEAR_REG, cppi_ch->index);
+
+		tx_ram = cppi_ch->state_ram;
+		do {
+			value = musb_readl(&tx_ram->tx_complete, 0);
+		} while (0xFFFFFFFC != value);
+
+		/* FIXME clean up the transfer state ... here?
+		 * the completion routine should get called with
+		 * an appropriate status code.
+		 */
+
+		value = musb_readw(regs, MUSB_TXCSR);
+		value &= ~MUSB_TXCSR_DMAENAB;
+		value |= MUSB_TXCSR_FLUSHFIFO;
+		musb_writew(regs, MUSB_TXCSR, value);
+		musb_writew(regs, MUSB_TXCSR, value);
+
+		/*
+		 * 1. Write to completion Ptr value 0x1(bit 0 set)
+		 *    (write back mode)
+		 * 2. Wait for abort interrupt and then put the channel in
+		 *    compare mode by writing 1 to the tx_complete register.
+		 */
+		cppi_reset_tx(tx_ram, 1);
+		cppi_ch->head = NULL;
+		musb_writel(&tx_ram->tx_complete, 0, 1);
+		cppi_dump_tx(5, cppi_ch, " (done teardown)");
+
+		/* REVISIT tx side _should_ clean up the same way
+		 * as the RX side ... this does no cleanup at all!
+		 */
+
+	} else /* RX */ {
+		u16			csr;
+
+		/* NOTE: docs don't guarantee any of this works ...  we
+		 * expect that if the usb core stops telling the cppi core
+		 * to pull more data from it, then it'll be safe to flush
+		 * current RX DMA state iff any pending fifo transfer is done.
+		 */
+
+		core_rxirq_disable(tibase, cppi_ch->index + 1);
+
+		/* for host, ensure ReqPkt is never set again */
+		if (is_host_active(cppi_ch->controller->controller.musb)) {
+			value = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+			value &= ~((0x3) << (cppi_ch->index * 2));
+			musb_writel(tibase, DAVINCI_AUTOREQ_REG, value);
+		}
+
+		csr = musb_readw(regs, MUSB_RXCSR);
+
+		/* for host, clear (just) ReqPkt at end of current packet(s) */
+		if (is_host_active(cppi_ch->controller->controller.musb)) {
+			csr |= MUSB_RXCSR_H_WZC_BITS;
+			csr &= ~MUSB_RXCSR_H_REQPKT;
+		} else
+			csr |= MUSB_RXCSR_P_WZC_BITS;
+
+		/* clear dma enable */
+		csr &= ~(MUSB_RXCSR_DMAENAB);
+		musb_writew(regs, MUSB_RXCSR, csr);
+		csr = musb_readw(regs, MUSB_RXCSR);
+
+		/* Quiesce: wait for current dma to finish (if not cleanup).
+		 * We can't use bit zero of stateram->rx_sop, since that
+		 * refers to an entire "DMA packet" not just emptying the
+		 * current fifo.  Most segments need multiple usb packets.
+		 */
+		if (channel->status == MUSB_DMA_STATUS_BUSY)
+			udelay(50);
+
+		/* scan the current list, reporting any data that was
+		 * transferred and acking any IRQ
+		 */
+		cppi_rx_scan(controller, cppi_ch->index);
+
+		/* clobber the existing state once it's idle
+		 *
+		 * NOTE:  arguably, we should also wait for all the other
+		 * RX channels to quiesce (how??) and then temporarily
+		 * disable RXCPPI_CTRL_REG ... but it seems that we can
+		 * rely on the controller restarting from state ram, with
+		 * only RXCPPI_BUFCNT state being bogus.  BUFCNT will
+		 * correct itself after the next DMA transfer though.
+		 *
+		 * REVISIT does using rndis mode change that?
+		 */
+		cppi_reset_rx(cppi_ch->state_ram);
+
+		/* next DMA request _should_ load cppi head ptr */
+
+		/* ... we don't "free" that list, only mutate it in place.  */
+		cppi_dump_rx(5, cppi_ch, " (done abort)");
+
+		/* clean up previously pending bds */
+		cppi_bd_free(cppi_ch, cppi_ch->last_processed);
+		cppi_ch->last_processed = NULL;
+
+		while (queue) {
+			struct cppi_descriptor	*tmp = queue->next;
+
+			cppi_bd_free(cppi_ch, queue);
+			queue = tmp;
+		}
+	}
+
+	channel->status = MUSB_DMA_STATUS_FREE;
+	cppi_ch->buf_dma = 0;
+	cppi_ch->offset = 0;
+	cppi_ch->buf_len = 0;
+	cppi_ch->maxpacket = 0;
+	return 0;
+}
+
+/* TBD Queries:
+ *
+ * Power Management ... probably turn off cppi during suspend, restart;
+ * check state ram?  Clocking is presumably shared with usb core.
+ */
diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h
new file mode 100644
index 000000000..16dd1ed44
--- /dev/null
+++ b/drivers/usb/musb/cppi_dma.h
@@ -0,0 +1,147 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2005-2006 by Texas Instruments */
+
+#ifndef _CPPI_DMA_H_
+#define _CPPI_DMA_H_
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/dmapool.h>
+#include <linux/dmaengine.h>
+
+#include "musb_core.h"
+#include "musb_dma.h"
+
+/* CPPI RX/TX state RAM */
+
+struct cppi_tx_stateram {
+	u32 tx_head;			/* "DMA packet" head descriptor */
+	u32 tx_buf;
+	u32 tx_current;			/* current descriptor */
+	u32 tx_buf_current;
+	u32 tx_info;			/* flags, remaining buflen */
+	u32 tx_rem_len;
+	u32 tx_dummy;			/* unused */
+	u32 tx_complete;
+};
+
+struct cppi_rx_stateram {
+	u32 rx_skipbytes;
+	u32 rx_head;
+	u32 rx_sop;			/* "DMA packet" head descriptor */
+	u32 rx_current;			/* current descriptor */
+	u32 rx_buf_current;
+	u32 rx_len_len;
+	u32 rx_cnt_cnt;
+	u32 rx_complete;
+};
+
+/* hw_options bits in CPPI buffer descriptors */
+#define CPPI_SOP_SET	((u32)(1 << 31))
+#define CPPI_EOP_SET	((u32)(1 << 30))
+#define CPPI_OWN_SET	((u32)(1 << 29))	/* owned by cppi */
+#define CPPI_EOQ_MASK	((u32)(1 << 28))
+#define CPPI_ZERO_SET	((u32)(1 << 23))	/* rx saw zlp; tx issues one */
+#define CPPI_RXABT_MASK	((u32)(1 << 19))	/* need more rx buffers */
+
+#define CPPI_RECV_PKTLEN_MASK 0xFFFF
+#define CPPI_BUFFER_LEN_MASK 0xFFFF
+
+#define CPPI_TEAR_READY ((u32)(1 << 31))
+
+/* CPPI data structure definitions */
+
+#define	CPPI_DESCRIPTOR_ALIGN	16	/* bytes; 5-dec docs say 4-byte align */
+
+struct cppi_descriptor {
+	/* hardware overlay */
+	u32		hw_next;	/* next buffer descriptor Pointer */
+	u32		hw_bufp;	/* i/o buffer pointer */
+	u32		hw_off_len;	/* buffer_offset16, buffer_length16 */
+	u32		hw_options;	/* flags:  SOP, EOP etc*/
+
+	struct cppi_descriptor *next;
+	dma_addr_t	dma;		/* address of this descriptor */
+	u32		buflen;		/* for RX: original buffer length */
+} __attribute__ ((aligned(CPPI_DESCRIPTOR_ALIGN)));
+
+
+struct cppi;
+
+/* CPPI  Channel Control structure */
+struct cppi_channel {
+	struct dma_channel	channel;
+
+	/* back pointer to the DMA controller structure */
+	struct cppi		*controller;
+
+	/* which direction of which endpoint? */
+	struct musb_hw_ep	*hw_ep;
+	bool			transmit;
+	u8			index;
+
+	/* DMA modes:  RNDIS or "transparent" */
+	u8			is_rndis;
+
+	/* book keeping for current transfer request */
+	dma_addr_t		buf_dma;
+	u32			buf_len;
+	u32			maxpacket;
+	u32			offset;		/* dma requested */
+
+	void __iomem		*state_ram;	/* CPPI state */
+
+	struct cppi_descriptor	*freelist;
+
+	/* BD management fields */
+	struct cppi_descriptor	*head;
+	struct cppi_descriptor	*tail;
+	struct cppi_descriptor	*last_processed;
+
+	/* use tx_complete in host role to track endpoints waiting for
+	 * FIFONOTEMPTY to clear.
+	 */
+	struct list_head	tx_complete;
+};
+
+/* CPPI DMA controller object */
+struct cppi {
+	struct dma_controller		controller;
+	void __iomem			*mregs;		/* Mentor regs */
+	void __iomem			*tibase;	/* TI/CPPI regs */
+
+	int				irq;
+
+	struct cppi_channel		tx[4];
+	struct cppi_channel		rx[4];
+
+	struct dma_pool			*pool;
+
+	struct list_head		tx_complete;
+};
+
+/* CPPI IRQ handler */
+extern irqreturn_t cppi_interrupt(int, void *);
+
+struct cppi41_dma_channel {
+	struct dma_channel channel;
+	struct cppi41_dma_controller *controller;
+	struct musb_hw_ep *hw_ep;
+	struct dma_chan *dc;
+	dma_cookie_t cookie;
+	u8 port_num;
+	u8 is_tx;
+	u8 is_allocated;
+	u8 usb_toggle;
+
+	dma_addr_t buf_addr;
+	u32 total_len;
+	u32 prog_len;
+	u32 transferred;
+	u32 packet_sz;
+	struct list_head tx_check;
+	int tx_zlp;
+};
+
+#endif				/* end of ifndef _CPPI_DMA_H_ */
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
new file mode 100644
index 000000000..a4e55b0c5
--- /dev/null
+++ b/drivers/usb/musb/da8xx.c
@@ -0,0 +1,638 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Texas Instruments DA8xx/OMAP-L1x "glue layer"
+ *
+ * Copyright (c) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * Based on the DaVinci "glue layer" code.
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * DT support
+ * Copyright (c) 2016 Petr Kulhavy <petr@barix.com>
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/usb_phy_generic.h>
+
+#include "musb_core.h"
+
+/*
+ * DA8XX specific definitions
+ */
+
+/* USB 2.0 OTG module registers */
+#define DA8XX_USB_REVISION_REG	0x00
+#define DA8XX_USB_CTRL_REG	0x04
+#define DA8XX_USB_STAT_REG	0x08
+#define DA8XX_USB_EMULATION_REG 0x0c
+#define DA8XX_USB_SRP_FIX_TIME_REG 0x18
+#define DA8XX_USB_INTR_SRC_REG	0x20
+#define DA8XX_USB_INTR_SRC_SET_REG 0x24
+#define DA8XX_USB_INTR_SRC_CLEAR_REG 0x28
+#define DA8XX_USB_INTR_MASK_REG 0x2c
+#define DA8XX_USB_INTR_MASK_SET_REG 0x30
+#define DA8XX_USB_INTR_MASK_CLEAR_REG 0x34
+#define DA8XX_USB_INTR_SRC_MASKED_REG 0x38
+#define DA8XX_USB_END_OF_INTR_REG 0x3c
+#define DA8XX_USB_GENERIC_RNDIS_EP_SIZE_REG(n) (0x50 + (((n) - 1) << 2))
+
+/* Control register bits */
+#define DA8XX_SOFT_RESET_MASK	1
+
+#define DA8XX_USB_TX_EP_MASK	0x1f		/* EP0 + 4 Tx EPs */
+#define DA8XX_USB_RX_EP_MASK	0x1e		/* 4 Rx EPs */
+
+/* USB interrupt register bits */
+#define DA8XX_INTR_USB_SHIFT	16
+#define DA8XX_INTR_USB_MASK	(0x1ff << DA8XX_INTR_USB_SHIFT) /* 8 Mentor */
+					/* interrupts and DRVVBUS interrupt */
+#define DA8XX_INTR_DRVVBUS	0x100
+#define DA8XX_INTR_RX_SHIFT	8
+#define DA8XX_INTR_RX_MASK	(DA8XX_USB_RX_EP_MASK << DA8XX_INTR_RX_SHIFT)
+#define DA8XX_INTR_TX_SHIFT	0
+#define DA8XX_INTR_TX_MASK	(DA8XX_USB_TX_EP_MASK << DA8XX_INTR_TX_SHIFT)
+
+#define DA8XX_MENTOR_CORE_OFFSET 0x400
+
+struct da8xx_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct platform_device	*usb_phy;
+	struct clk		*clk;
+	struct phy		*phy;
+};
+
+/*
+ * Because we don't set CTRL.UINT, it's "important" to:
+ *	- not read/write INTRUSB/INTRUSBE (except during
+ *	  initial setup, as a workaround);
+ *	- use INTSET/INTCLR instead.
+ */
+
+/**
+ * da8xx_musb_enable - enable interrupts
+ */
+static void da8xx_musb_enable(struct musb *musb)
+{
+	void __iomem *reg_base = musb->ctrl_base;
+	u32 mask;
+
+	/* Workaround: setup IRQs through both register sets. */
+	mask = ((musb->epmask & DA8XX_USB_TX_EP_MASK) << DA8XX_INTR_TX_SHIFT) |
+	       ((musb->epmask & DA8XX_USB_RX_EP_MASK) << DA8XX_INTR_RX_SHIFT) |
+	       DA8XX_INTR_USB_MASK;
+	musb_writel(reg_base, DA8XX_USB_INTR_MASK_SET_REG, mask);
+
+	/* Force the DRVVBUS IRQ so we can start polling for ID change. */
+	musb_writel(reg_base, DA8XX_USB_INTR_SRC_SET_REG,
+			DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT);
+}
+
+/**
+ * da8xx_musb_disable - disable HDRC and flush interrupts
+ */
+static void da8xx_musb_disable(struct musb *musb)
+{
+	void __iomem *reg_base = musb->ctrl_base;
+
+	musb_writel(reg_base, DA8XX_USB_INTR_MASK_CLEAR_REG,
+		    DA8XX_INTR_USB_MASK |
+		    DA8XX_INTR_TX_MASK | DA8XX_INTR_RX_MASK);
+	musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
+}
+
+#define portstate(stmt)		stmt
+
+static void da8xx_musb_set_vbus(struct musb *musb, int is_on)
+{
+	WARN_ON(is_on && is_peripheral_active(musb));
+}
+
+#define	POLL_SECONDS	2
+
+static void otg_timer(struct timer_list *t)
+{
+	struct musb		*musb = from_timer(musb, t, dev_timer);
+	void __iomem		*mregs = musb->mregs;
+	u8			devctl;
+	unsigned long		flags;
+
+	/*
+	 * We poll because DaVinci's won't expose several OTG-critical
+	 * status change events (from the transceiver) otherwise.
+	 */
+	devctl = musb_readb(mregs, MUSB_DEVCTL);
+	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
+		usb_otg_state_string(musb->xceiv->otg->state));
+
+	spin_lock_irqsave(&musb->lock, flags);
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_A_WAIT_BCON:
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE) {
+			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+			MUSB_DEV_MODE(musb);
+		} else {
+			musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+			MUSB_HST_MODE(musb);
+		}
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		/*
+		 * Wait till VBUS falls below SessionEnd (~0.2 V); the 1.3
+		 * RTL seems to mis-handle session "start" otherwise (or in
+		 * our case "recover"), in routine "VBUS was valid by the time
+		 * VBUSERR got reported during enumeration" cases.
+		 */
+		if (devctl & MUSB_DEVCTL_VBUS) {
+			mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
+			break;
+		}
+		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+		musb_writel(musb->ctrl_base, DA8XX_USB_INTR_SRC_SET_REG,
+			    MUSB_INTR_VBUSERROR << DA8XX_INTR_USB_SHIFT);
+		break;
+	case OTG_STATE_B_IDLE:
+		/*
+		 * There's no ID-changed IRQ, so we have no good way to tell
+		 * when to switch to the A-Default state machine (by setting
+		 * the DEVCTL.Session bit).
+		 *
+		 * Workaround:  whenever we're in B_IDLE, try setting the
+		 * session flag every few seconds.  If it works, ID was
+		 * grounded and we're now in the A-Default state machine.
+		 *
+		 * NOTE: setting the session flag is _supposed_ to trigger
+		 * SRP but clearly it doesn't.
+		 */
+		musb_writeb(mregs, MUSB_DEVCTL, devctl | MUSB_DEVCTL_SESSION);
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE)
+			mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
+		else
+			musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+		break;
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout)
+{
+	static unsigned long last_timer;
+
+	if (timeout == 0)
+		timeout = jiffies + msecs_to_jiffies(3);
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || (musb->a_wait_bcon == 0 &&
+				musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)) {
+		dev_dbg(musb->controller, "%s active, deleting timer\n",
+			usb_otg_state_string(musb->xceiv->otg->state));
+		del_timer(&musb->dev_timer);
+		last_timer = jiffies;
+		return;
+	}
+
+	if (time_after(last_timer, timeout) && timer_pending(&musb->dev_timer)) {
+		dev_dbg(musb->controller, "Longer idle timer already pending, ignoring...\n");
+		return;
+	}
+	last_timer = timeout;
+
+	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
+		usb_otg_state_string(musb->xceiv->otg->state),
+		jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&musb->dev_timer, timeout);
+}
+
+static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
+{
+	struct musb		*musb = hci;
+	void __iomem		*reg_base = musb->ctrl_base;
+	unsigned long		flags;
+	irqreturn_t		ret = IRQ_NONE;
+	u32			status;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/*
+	 * NOTE: DA8XX shadows the Mentor IRQs.  Don't manage them through
+	 * the Mentor registers (except for setup), use the TI ones and EOI.
+	 */
+
+	/* Acknowledge and handle non-CPPI interrupts */
+	status = musb_readl(reg_base, DA8XX_USB_INTR_SRC_MASKED_REG);
+	if (!status)
+		goto eoi;
+
+	musb_writel(reg_base, DA8XX_USB_INTR_SRC_CLEAR_REG, status);
+	dev_dbg(musb->controller, "USB IRQ %08x\n", status);
+
+	musb->int_rx = (status & DA8XX_INTR_RX_MASK) >> DA8XX_INTR_RX_SHIFT;
+	musb->int_tx = (status & DA8XX_INTR_TX_MASK) >> DA8XX_INTR_TX_SHIFT;
+	musb->int_usb = (status & DA8XX_INTR_USB_MASK) >> DA8XX_INTR_USB_SHIFT;
+
+	/*
+	 * DRVVBUS IRQs are the only proxy we have (a very poor one!) for
+	 * DA8xx's missing ID change IRQ.  We need an ID change IRQ to
+	 * switch appropriately between halves of the OTG state machine.
+	 * Managing DEVCTL.Session per Mentor docs requires that we know its
+	 * value but DEVCTL.BDevice is invalid without DEVCTL.Session set.
+	 * Also, DRVVBUS pulses for SRP (but not at 5 V)...
+	 */
+	if (status & (DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT)) {
+		int drvvbus = musb_readl(reg_base, DA8XX_USB_STAT_REG);
+		void __iomem *mregs = musb->mregs;
+		u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
+		int err;
+
+		err = musb->int_usb & MUSB_INTR_VBUSERROR;
+		if (err) {
+			/*
+			 * The Mentor core doesn't debounce VBUS as needed
+			 * to cope with device connect current spikes. This
+			 * means it's not uncommon for bus-powered devices
+			 * to get VBUS errors during enumeration.
+			 *
+			 * This is a workaround, but newer RTL from Mentor
+			 * seems to allow a better one: "re"-starting sessions
+			 * without waiting for VBUS to stop registering in
+			 * devctl.
+			 */
+			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
+			mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
+			WARNING("VBUS error workaround (delay coming)\n");
+		} else if (drvvbus) {
+			MUSB_HST_MODE(musb);
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+			portstate(musb->port1_status |= USB_PORT_STAT_POWER);
+			del_timer(&musb->dev_timer);
+		} else if (!(musb->int_usb & MUSB_INTR_BABBLE)) {
+			/*
+			 * When babble condition happens, drvvbus interrupt
+			 * is also generated. Ignore this drvvbus interrupt
+			 * and let babble interrupt handler recovers the
+			 * controller; otherwise, the host-mode flag is lost
+			 * due to the MUSB_DEV_MODE() call below and babble
+			 * recovery logic will not be called.
+			 */
+			musb->is_active = 0;
+			MUSB_DEV_MODE(musb);
+			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+			portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
+		}
+
+		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
+				drvvbus ? "on" : "off",
+				usb_otg_state_string(musb->xceiv->otg->state),
+				err ? " ERROR" : "",
+				devctl);
+		ret = IRQ_HANDLED;
+	}
+
+	if (musb->int_tx || musb->int_rx || musb->int_usb)
+		ret |= musb_interrupt(musb);
+
+ eoi:
+	/* EOI needs to be written for the IRQ to be re-asserted. */
+	if (ret == IRQ_HANDLED || status)
+		musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
+
+	/* Poll for ID change */
+	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
+		mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return ret;
+}
+
+static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode)
+{
+	struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent);
+	enum phy_mode phy_mode;
+
+	/*
+	 * The PHY has some issues when it is forced in device or host mode.
+	 * Unless the user request another mode, configure the PHY in OTG mode.
+	 */
+	if (!musb->is_initialized)
+		return phy_set_mode(glue->phy, PHY_MODE_USB_OTG);
+
+	switch (musb_mode) {
+	case MUSB_HOST:		/* Force VBUS valid, ID = 0 */
+		phy_mode = PHY_MODE_USB_HOST;
+		break;
+	case MUSB_PERIPHERAL:	/* Force VBUS valid, ID = 1 */
+		phy_mode = PHY_MODE_USB_DEVICE;
+		break;
+	case MUSB_OTG:		/* Don't override the VBUS/ID comparators */
+		phy_mode = PHY_MODE_USB_OTG;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return phy_set_mode(glue->phy, phy_mode);
+}
+
+static int da8xx_musb_init(struct musb *musb)
+{
+	struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent);
+	void __iomem *reg_base = musb->ctrl_base;
+	u32 rev;
+	int ret = -ENODEV;
+
+	musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
+
+	ret = clk_prepare_enable(glue->clk);
+	if (ret) {
+		dev_err(glue->dev, "failed to enable clock\n");
+		return ret;
+	}
+
+	/* Returns zero if e.g. not clocked */
+	rev = musb_readl(reg_base, DA8XX_USB_REVISION_REG);
+	if (!rev)
+		goto fail;
+
+	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
+		ret = -EPROBE_DEFER;
+		goto fail;
+	}
+
+	timer_setup(&musb->dev_timer, otg_timer, 0);
+
+	/* Reset the controller */
+	musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK);
+
+	/* Start the on-chip PHY and its PLL. */
+	ret = phy_init(glue->phy);
+	if (ret) {
+		dev_err(glue->dev, "Failed to init phy.\n");
+		goto fail;
+	}
+
+	ret = phy_power_on(glue->phy);
+	if (ret) {
+		dev_err(glue->dev, "Failed to power on phy.\n");
+		goto err_phy_power_on;
+	}
+
+	msleep(5);
+
+	/* NOTE: IRQs are in mixed mode, not bypass to pure MUSB */
+	pr_debug("DA8xx OTG revision %08x, control %02x\n", rev,
+		 musb_readb(reg_base, DA8XX_USB_CTRL_REG));
+
+	musb->isr = da8xx_musb_interrupt;
+	return 0;
+
+err_phy_power_on:
+	phy_exit(glue->phy);
+fail:
+	clk_disable_unprepare(glue->clk);
+	return ret;
+}
+
+static int da8xx_musb_exit(struct musb *musb)
+{
+	struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent);
+
+	del_timer_sync(&musb->dev_timer);
+
+	phy_power_off(glue->phy);
+	phy_exit(glue->phy);
+	clk_disable_unprepare(glue->clk);
+
+	usb_put_phy(musb->xceiv);
+
+	return 0;
+}
+
+static inline u8 get_vbus_power(struct device *dev)
+{
+	struct regulator *vbus_supply;
+	int current_uA;
+
+	vbus_supply = regulator_get_optional(dev, "vbus");
+	if (IS_ERR(vbus_supply))
+		return 255;
+	current_uA = regulator_get_current_limit(vbus_supply);
+	regulator_put(vbus_supply);
+	if (current_uA <= 0 || current_uA > 510000)
+		return 255;
+	return current_uA / 1000 / 2;
+}
+
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+static void da8xx_dma_controller_callback(struct dma_controller *c)
+{
+	struct musb *musb = c->musb;
+	void __iomem *reg_base = musb->ctrl_base;
+
+	musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
+}
+
+static struct dma_controller *
+da8xx_dma_controller_create(struct musb *musb, void __iomem *base)
+{
+	struct dma_controller *controller;
+
+	controller = cppi41_dma_controller_create(musb, base);
+	if (IS_ERR_OR_NULL(controller))
+		return controller;
+
+	controller->dma_callback = da8xx_dma_controller_callback;
+
+	return controller;
+}
+#endif
+
+static const struct musb_platform_ops da8xx_ops = {
+	.quirks		= MUSB_INDEXED_EP | MUSB_PRESERVE_SESSION |
+			  MUSB_DMA_CPPI41 | MUSB_DA8XX,
+	.init		= da8xx_musb_init,
+	.exit		= da8xx_musb_exit,
+
+	.fifo_mode	= 2,
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+	.dma_init	= da8xx_dma_controller_create,
+	.dma_exit	= cppi41_dma_controller_destroy,
+#endif
+	.enable		= da8xx_musb_enable,
+	.disable	= da8xx_musb_disable,
+
+	.set_mode	= da8xx_musb_set_mode,
+	.try_idle	= da8xx_musb_try_idle,
+
+	.set_vbus	= da8xx_musb_set_vbus,
+};
+
+static const struct platform_device_info da8xx_dev_info = {
+	.name		= "musb-hdrc",
+	.id		= PLATFORM_DEVID_AUTO,
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+static const struct musb_hdrc_config da8xx_config = {
+	.ram_bits = 10,
+	.num_eps = 5,
+	.multipoint = 1,
+};
+
+static struct of_dev_auxdata da8xx_auxdata_lookup[] = {
+	OF_DEV_AUXDATA("ti,da830-cppi41", 0x01e01000, "cppi41-dmaengine",
+		       NULL),
+	{}
+};
+
+static int da8xx_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
+	struct da8xx_glue		*glue;
+	struct platform_device_info	pinfo;
+	struct clk			*clk;
+	struct device_node		*np = pdev->dev.of_node;
+	int				ret;
+
+	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		return -ENOMEM;
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		return PTR_ERR(clk);
+	}
+
+	glue->phy = devm_phy_get(&pdev->dev, "usb-phy");
+	if (IS_ERR(glue->phy))
+		return dev_err_probe(&pdev->dev, PTR_ERR(glue->phy),
+				     "failed to get phy\n");
+
+	glue->dev			= &pdev->dev;
+	glue->clk			= clk;
+
+	if (IS_ENABLED(CONFIG_OF) && np) {
+		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+
+		pdata->config	= &da8xx_config;
+		pdata->mode	= musb_get_mode(&pdev->dev);
+		pdata->power	= get_vbus_power(&pdev->dev);
+	}
+
+	pdata->platform_ops		= &da8xx_ops;
+
+	glue->usb_phy = usb_phy_generic_register();
+	ret = PTR_ERR_OR_ZERO(glue->usb_phy);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register usb_phy\n");
+		return ret;
+	}
+	platform_set_drvdata(pdev, glue);
+
+	ret = of_platform_populate(pdev->dev.of_node, NULL,
+				   da8xx_auxdata_lookup, &pdev->dev);
+	if (ret)
+		return ret;
+
+	pinfo = da8xx_dev_info;
+	pinfo.parent = &pdev->dev;
+	pinfo.res = pdev->resource;
+	pinfo.num_res = pdev->num_resources;
+	pinfo.data = pdata;
+	pinfo.size_data = sizeof(*pdata);
+	pinfo.fwnode = of_fwnode_handle(np);
+	pinfo.of_node_reused = true;
+
+	glue->musb = platform_device_register_full(&pinfo);
+	ret = PTR_ERR_OR_ZERO(glue->musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
+		usb_phy_generic_unregister(glue->usb_phy);
+	}
+
+	return ret;
+}
+
+static int da8xx_remove(struct platform_device *pdev)
+{
+	struct da8xx_glue		*glue = platform_get_drvdata(pdev);
+
+	platform_device_unregister(glue->musb);
+	usb_phy_generic_unregister(glue->usb_phy);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int da8xx_suspend(struct device *dev)
+{
+	int ret;
+	struct da8xx_glue *glue = dev_get_drvdata(dev);
+
+	ret = phy_power_off(glue->phy);
+	if (ret)
+		return ret;
+	clk_disable_unprepare(glue->clk);
+
+	return 0;
+}
+
+static int da8xx_resume(struct device *dev)
+{
+	int ret;
+	struct da8xx_glue *glue = dev_get_drvdata(dev);
+
+	ret = clk_prepare_enable(glue->clk);
+	if (ret)
+		return ret;
+	return phy_power_on(glue->phy);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(da8xx_pm_ops, da8xx_suspend, da8xx_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id da8xx_id_table[] = {
+	{
+		.compatible = "ti,da830-musb",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, da8xx_id_table);
+#endif
+
+static struct platform_driver da8xx_driver = {
+	.probe		= da8xx_probe,
+	.remove		= da8xx_remove,
+	.driver		= {
+		.name	= "musb-da8xx",
+		.pm = &da8xx_pm_ops,
+		.of_match_table = of_match_ptr(da8xx_id_table),
+	},
+};
+
+MODULE_DESCRIPTION("DA8xx/OMAP-L1x MUSB Glue Layer");
+MODULE_AUTHOR("Sergei Shtylyov <sshtylyov@ru.mvista.com>");
+MODULE_LICENSE("GPL v2");
+module_platform_driver(da8xx_driver);
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
new file mode 100644
index 000000000..704435526
--- /dev/null
+++ b/drivers/usb/musb/davinci.c
@@ -0,0 +1,606 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/usb_phy_generic.h>
+
+#include <mach/cputype.h>
+#include <mach/hardware.h>
+
+#include <asm/mach-types.h>
+
+#include "musb_core.h"
+
+#include "davinci.h"
+#include "cppi_dma.h"
+
+
+#define USB_PHY_CTRL	IO_ADDRESS(USBPHY_CTL_PADDR)
+#define DM355_DEEPSLEEP	IO_ADDRESS(DM355_DEEPSLEEP_PADDR)
+
+struct davinci_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct clk		*clk;
+	bool			vbus_state;
+	struct gpio_desc	*vbus;
+	struct work_struct	vbus_work;
+};
+
+/* REVISIT (PM) we should be able to keep the PHY in low power mode most
+ * of the time (24 MHZ oscillator and PLL off, etc) by setting POWER.D0
+ * and, when in host mode, autosuspending idle root ports... PHYPLLON
+ * (overriding SUSPENDM?) then likely needs to stay off.
+ */
+
+static inline void phy_on(void)
+{
+	u32	phy_ctrl = __raw_readl(USB_PHY_CTRL);
+
+	/* power everything up; start the on-chip PHY and its PLL */
+	phy_ctrl &= ~(USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN);
+	phy_ctrl |= USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON;
+	__raw_writel(phy_ctrl, USB_PHY_CTRL);
+
+	/* wait for PLL to lock before proceeding */
+	while ((__raw_readl(USB_PHY_CTRL) & USBPHY_PHYCLKGD) == 0)
+		cpu_relax();
+}
+
+static inline void phy_off(void)
+{
+	u32	phy_ctrl = __raw_readl(USB_PHY_CTRL);
+
+	/* powerdown the on-chip PHY, its PLL, and the OTG block */
+	phy_ctrl &= ~(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON);
+	phy_ctrl |= USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN;
+	__raw_writel(phy_ctrl, USB_PHY_CTRL);
+}
+
+static int dma_off = 1;
+
+static void davinci_musb_enable(struct musb *musb)
+{
+	u32	tmp, old, val;
+
+	/* workaround:  setup irqs through both register sets */
+	tmp = (musb->epmask & DAVINCI_USB_TX_ENDPTS_MASK)
+			<< DAVINCI_USB_TXINT_SHIFT;
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+	old = tmp;
+	tmp = (musb->epmask & (0xfffe & DAVINCI_USB_RX_ENDPTS_MASK))
+			<< DAVINCI_USB_RXINT_SHIFT;
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+	tmp |= old;
+
+	val = ~MUSB_INTR_SOF;
+	tmp |= ((val & 0x01ff) << DAVINCI_USB_USBINT_SHIFT);
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+
+	if (is_dma_capable() && !dma_off)
+		printk(KERN_WARNING "%s %s: dma not reactivated\n",
+				__FILE__, __func__);
+	else
+		dma_off = 0;
+
+	/* force a DRVVBUS irq so we can start polling for ID change */
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
+			DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT);
+}
+
+/*
+ * Disable the HDRC and flush interrupts
+ */
+static void davinci_musb_disable(struct musb *musb)
+{
+	/* because we don't set CTRLR.UINT, "important" to:
+	 *  - not read/write INTRUSB/INTRUSBE
+	 *  - (except during initial setup, as workaround)
+	 *  - use INTSETR/INTCLRR instead
+	 */
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_CLR_REG,
+			  DAVINCI_USB_USBINT_MASK
+			| DAVINCI_USB_TXINT_MASK
+			| DAVINCI_USB_RXINT_MASK);
+	musb_writel(musb->ctrl_base, DAVINCI_USB_EOI_REG, 0);
+
+	if (is_dma_capable() && !dma_off)
+		WARNING("dma still active\n");
+}
+
+
+#define	portstate(stmt)		stmt
+
+/*
+ * VBUS SWITCHING IS BOARD-SPECIFIC ... at least for the DM6446 EVM,
+ * which doesn't wire DRVVBUS to the FET that switches it.  Unclear
+ * if that's a problem with the DM6446 chip or just with that board.
+ *
+ * In either case, the DM355 EVM automates DRVVBUS the normal way,
+ * when J10 is out, and TI documents it as handling OTG.
+ */
+
+/* I2C operations are always synchronous, and require a task context.
+ * With unloaded systems, using the shared workqueue seems to suffice
+ * to satisfy the 100msec A_WAIT_VRISE timeout...
+ */
+static void evm_deferred_drvvbus(struct work_struct *work)
+{
+	struct davinci_glue *glue = container_of(work, struct davinci_glue,
+						 vbus_work);
+
+	gpiod_set_value_cansleep(glue->vbus, glue->vbus_state);
+	glue->vbus_state = !glue->vbus_state;
+}
+
+static void davinci_musb_source_power(struct musb *musb, int is_on,
+				      int immediate)
+{
+	struct davinci_glue *glue = dev_get_drvdata(musb->controller->parent);
+
+	/* This GPIO handling is entirely optional */
+	if (!glue->vbus)
+		return;
+
+	if (is_on)
+		is_on = 1;
+
+	if (glue->vbus_state == is_on)
+		return;
+	/* 0/1 vs "-1 == unknown/init" */
+	glue->vbus_state = !is_on;
+
+	if (machine_is_davinci_evm()) {
+		if (immediate)
+			gpiod_set_value_cansleep(glue->vbus, glue->vbus_state);
+		else
+			schedule_work(&glue->vbus_work);
+	}
+	if (immediate)
+		glue->vbus_state = is_on;
+}
+
+static void davinci_musb_set_vbus(struct musb *musb, int is_on)
+{
+	WARN_ON(is_on && is_peripheral_active(musb));
+	davinci_musb_source_power(musb, is_on, 0);
+}
+
+
+#define	POLL_SECONDS	2
+
+static void otg_timer(struct timer_list *t)
+{
+	struct musb		*musb = from_timer(musb, t, dev_timer);
+	void __iomem		*mregs = musb->mregs;
+	u8			devctl;
+	unsigned long		flags;
+
+	/* We poll because DaVinci's won't expose several OTG-critical
+	* status change events (from the transceiver) otherwise.
+	 */
+	devctl = musb_readb(mregs, MUSB_DEVCTL);
+	dev_dbg(musb->controller, "poll devctl %02x (%s)\n", devctl,
+		usb_otg_state_string(musb->xceiv->otg->state));
+
+	spin_lock_irqsave(&musb->lock, flags);
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_A_WAIT_VFALL:
+		/* Wait till VBUS falls below SessionEnd (~0.2V); the 1.3 RTL
+		 * seems to mis-handle session "start" otherwise (or in our
+		 * case "recover"), in routine "VBUS was valid by the time
+		 * VBUSERR got reported during enumeration" cases.
+		 */
+		if (devctl & MUSB_DEVCTL_VBUS) {
+			mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
+			break;
+		}
+		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+		musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
+			MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT);
+		break;
+	case OTG_STATE_B_IDLE:
+		/*
+		 * There's no ID-changed IRQ, so we have no good way to tell
+		 * when to switch to the A-Default state machine (by setting
+		 * the DEVCTL.SESSION flag).
+		 *
+		 * Workaround:  whenever we're in B_IDLE, try setting the
+		 * session flag every few seconds.  If it works, ID was
+		 * grounded and we're now in the A-Default state machine.
+		 *
+		 * NOTE setting the session flag is _supposed_ to trigger
+		 * SRP, but clearly it doesn't.
+		 */
+		musb_writeb(mregs, MUSB_DEVCTL,
+				devctl | MUSB_DEVCTL_SESSION);
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE)
+			mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
+		else
+			musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+		break;
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
+{
+	unsigned long	flags;
+	irqreturn_t	retval = IRQ_NONE;
+	struct musb	*musb = __hci;
+	struct usb_otg	*otg = musb->xceiv->otg;
+	void __iomem	*tibase = musb->ctrl_base;
+	struct cppi	*cppi;
+	u32		tmp;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/* NOTE: DaVinci shadows the Mentor IRQs.  Don't manage them through
+	 * the Mentor registers (except for setup), use the TI ones and EOI.
+	 *
+	 * Docs describe irq "vector" registers associated with the CPPI and
+	 * USB EOI registers.  These hold a bitmask corresponding to the
+	 * current IRQ, not an irq handler address.  Would using those bits
+	 * resolve some of the races observed in this dispatch code??
+	 */
+
+	/* CPPI interrupts share the same IRQ line, but have their own
+	 * mask, state, "vector", and EOI registers.
+	 */
+	cppi = container_of(musb->dma_controller, struct cppi, controller);
+	if (is_cppi_enabled(musb) && musb->dma_controller && !cppi->irq)
+		retval = cppi_interrupt(irq, __hci);
+
+	/* ack and handle non-CPPI interrupts */
+	tmp = musb_readl(tibase, DAVINCI_USB_INT_SRC_MASKED_REG);
+	musb_writel(tibase, DAVINCI_USB_INT_SRC_CLR_REG, tmp);
+	dev_dbg(musb->controller, "IRQ %08x\n", tmp);
+
+	musb->int_rx = (tmp & DAVINCI_USB_RXINT_MASK)
+			>> DAVINCI_USB_RXINT_SHIFT;
+	musb->int_tx = (tmp & DAVINCI_USB_TXINT_MASK)
+			>> DAVINCI_USB_TXINT_SHIFT;
+	musb->int_usb = (tmp & DAVINCI_USB_USBINT_MASK)
+			>> DAVINCI_USB_USBINT_SHIFT;
+
+	/* DRVVBUS irqs are the only proxy we have (a very poor one!) for
+	 * DaVinci's missing ID change IRQ.  We need an ID change IRQ to
+	 * switch appropriately between halves of the OTG state machine.
+	 * Managing DEVCTL.SESSION per Mentor docs requires we know its
+	 * value, but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
+	 * Also, DRVVBUS pulses for SRP (but not at 5V) ...
+	 */
+	if (tmp & (DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT)) {
+		int	drvvbus = musb_readl(tibase, DAVINCI_USB_STAT_REG);
+		void __iomem *mregs = musb->mregs;
+		u8	devctl = musb_readb(mregs, MUSB_DEVCTL);
+		int	err = musb->int_usb & MUSB_INTR_VBUSERROR;
+
+		err = musb->int_usb & MUSB_INTR_VBUSERROR;
+		if (err) {
+			/* The Mentor core doesn't debounce VBUS as needed
+			 * to cope with device connect current spikes. This
+			 * means it's not uncommon for bus-powered devices
+			 * to get VBUS errors during enumeration.
+			 *
+			 * This is a workaround, but newer RTL from Mentor
+			 * seems to allow a better one: "re"starting sessions
+			 * without waiting (on EVM, a **long** time) for VBUS
+			 * to stop registering in devctl.
+			 */
+			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
+			mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
+			WARNING("VBUS error workaround (delay coming)\n");
+		} else if (drvvbus) {
+			MUSB_HST_MODE(musb);
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+			portstate(musb->port1_status |= USB_PORT_STAT_POWER);
+			del_timer(&musb->dev_timer);
+		} else {
+			musb->is_active = 0;
+			MUSB_DEV_MODE(musb);
+			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+			portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
+		}
+
+		/* NOTE:  this must complete poweron within 100 msec
+		 * (OTG_TIME_A_WAIT_VRISE) but we don't check for that.
+		 */
+		davinci_musb_source_power(musb, drvvbus, 0);
+		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
+				drvvbus ? "on" : "off",
+				usb_otg_state_string(musb->xceiv->otg->state),
+				err ? " ERROR" : "",
+				devctl);
+		retval = IRQ_HANDLED;
+	}
+
+	if (musb->int_tx || musb->int_rx || musb->int_usb)
+		retval |= musb_interrupt(musb);
+
+	/* irq stays asserted until EOI is written */
+	musb_writel(tibase, DAVINCI_USB_EOI_REG, 0);
+
+	/* poll for ID change */
+	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
+		mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return retval;
+}
+
+static int davinci_musb_set_mode(struct musb *musb, u8 mode)
+{
+	/* EVM can't do this (right?) */
+	return -EIO;
+}
+
+static int davinci_musb_init(struct musb *musb)
+{
+	void __iomem	*tibase = musb->ctrl_base;
+	u32		revision;
+	int 		ret = -ENODEV;
+
+	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
+		ret = -EPROBE_DEFER;
+		goto unregister;
+	}
+
+	musb->mregs += DAVINCI_BASE_OFFSET;
+
+	/* returns zero if e.g. not clocked */
+	revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
+	if (revision == 0)
+		goto fail;
+
+	timer_setup(&musb->dev_timer, otg_timer, 0);
+
+	davinci_musb_source_power(musb, 0, 1);
+
+	/* dm355 EVM swaps D+/D- for signal integrity, and
+	 * is clocked from the main 24 MHz crystal.
+	 */
+	if (machine_is_davinci_dm355_evm()) {
+		u32	phy_ctrl = __raw_readl(USB_PHY_CTRL);
+
+		phy_ctrl &= ~(3 << 9);
+		phy_ctrl |= USBPHY_DATAPOL;
+		__raw_writel(phy_ctrl, USB_PHY_CTRL);
+	}
+
+	/* On dm355, the default-A state machine needs DRVVBUS control.
+	 * If we won't be a host, there's no need to turn it on.
+	 */
+	if (cpu_is_davinci_dm355()) {
+		u32	deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+		deepsleep &= ~DRVVBUS_FORCE;
+		__raw_writel(deepsleep, DM355_DEEPSLEEP);
+	}
+
+	/* reset the controller */
+	musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
+
+	/* start the on-chip PHY and its PLL */
+	phy_on();
+
+	msleep(5);
+
+	/* NOTE:  irqs are in mixed mode, not bypass to pure-musb */
+	pr_debug("DaVinci OTG revision %08x phy %03x control %02x\n",
+		revision, __raw_readl(USB_PHY_CTRL),
+		musb_readb(tibase, DAVINCI_USB_CTRL_REG));
+
+	musb->isr = davinci_musb_interrupt;
+	return 0;
+
+fail:
+	usb_put_phy(musb->xceiv);
+unregister:
+	usb_phy_generic_unregister();
+	return ret;
+}
+
+static int davinci_musb_exit(struct musb *musb)
+{
+	int	maxdelay = 30;
+	u8	devctl, warn = 0;
+
+	del_timer_sync(&musb->dev_timer);
+
+	/* force VBUS off */
+	if (cpu_is_davinci_dm355()) {
+		u32	deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+		deepsleep &= ~DRVVBUS_FORCE;
+		deepsleep |= DRVVBUS_OVERRIDE;
+		__raw_writel(deepsleep, DM355_DEEPSLEEP);
+	}
+
+	davinci_musb_source_power(musb, 0 /*off*/, 1);
+
+	/*
+	 * delay, to avoid problems with module reload.
+	 * if there's no peripheral connected, this can take a
+	 * long time to fall, especially on EVM with huge C133.
+	 */
+	do {
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if (!(devctl & MUSB_DEVCTL_VBUS))
+			break;
+		if ((devctl & MUSB_DEVCTL_VBUS) != warn) {
+			warn = devctl & MUSB_DEVCTL_VBUS;
+			dev_dbg(musb->controller, "VBUS %d\n",
+				warn >> MUSB_DEVCTL_VBUS_SHIFT);
+		}
+		msleep(1000);
+		maxdelay--;
+	} while (maxdelay > 0);
+
+	/* in OTG mode, another host might be connected */
+	if (devctl & MUSB_DEVCTL_VBUS)
+		dev_dbg(musb->controller, "VBUS off timeout (devctl %02x)\n", devctl);
+
+	phy_off();
+
+	usb_put_phy(musb->xceiv);
+
+	return 0;
+}
+
+static const struct musb_platform_ops davinci_ops = {
+	.quirks		= MUSB_DMA_CPPI,
+	.init		= davinci_musb_init,
+	.exit		= davinci_musb_exit,
+
+#ifdef CONFIG_USB_TI_CPPI_DMA
+	.dma_init	= cppi_dma_controller_create,
+	.dma_exit	= cppi_dma_controller_destroy,
+#endif
+	.enable		= davinci_musb_enable,
+	.disable	= davinci_musb_disable,
+
+	.set_mode	= davinci_musb_set_mode,
+
+	.set_vbus	= davinci_musb_set_vbus,
+};
+
+static const struct platform_device_info davinci_dev_info = {
+	.name		= "musb-hdrc",
+	.id		= PLATFORM_DEVID_AUTO,
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+static int davinci_probe(struct platform_device *pdev)
+{
+	struct resource			musb_resources[3];
+	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
+	struct platform_device		*musb;
+	struct davinci_glue		*glue;
+	struct platform_device_info	pinfo;
+	struct clk			*clk;
+
+	int				ret = -ENOMEM;
+
+	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		goto err0;
+
+	clk = devm_clk_get(&pdev->dev, "usb");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err0;
+	}
+
+	ret = clk_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err0;
+	}
+
+	glue->dev			= &pdev->dev;
+	glue->clk			= clk;
+
+	pdata->platform_ops		= &davinci_ops;
+
+	glue->vbus = devm_gpiod_get_optional(&pdev->dev, NULL, GPIOD_OUT_LOW);
+	if (IS_ERR(glue->vbus)) {
+		ret = PTR_ERR(glue->vbus);
+		goto err0;
+	} else {
+		glue->vbus_state = -1;
+		INIT_WORK(&glue->vbus_work, evm_deferred_drvvbus);
+	}
+
+	usb_phy_generic_register();
+	platform_set_drvdata(pdev, glue);
+
+	memset(musb_resources, 0x00, sizeof(*musb_resources) *
+			ARRAY_SIZE(musb_resources));
+
+	musb_resources[0].name = pdev->resource[0].name;
+	musb_resources[0].start = pdev->resource[0].start;
+	musb_resources[0].end = pdev->resource[0].end;
+	musb_resources[0].flags = pdev->resource[0].flags;
+
+	musb_resources[1].name = pdev->resource[1].name;
+	musb_resources[1].start = pdev->resource[1].start;
+	musb_resources[1].end = pdev->resource[1].end;
+	musb_resources[1].flags = pdev->resource[1].flags;
+
+	/*
+	 * For DM6467 3 resources are passed. A placeholder for the 3rd
+	 * resource is always there, so it's safe to always copy it...
+	 */
+	musb_resources[2].name = pdev->resource[2].name;
+	musb_resources[2].start = pdev->resource[2].start;
+	musb_resources[2].end = pdev->resource[2].end;
+	musb_resources[2].flags = pdev->resource[2].flags;
+
+	pinfo = davinci_dev_info;
+	pinfo.parent = &pdev->dev;
+	pinfo.res = musb_resources;
+	pinfo.num_res = ARRAY_SIZE(musb_resources);
+	pinfo.data = pdata;
+	pinfo.size_data = sizeof(*pdata);
+
+	glue->musb = musb = platform_device_register_full(&pinfo);
+	if (IS_ERR(musb)) {
+		ret = PTR_ERR(musb);
+		dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
+		goto err1;
+	}
+
+	return 0;
+
+err1:
+	clk_disable(clk);
+
+err0:
+	return ret;
+}
+
+static int davinci_remove(struct platform_device *pdev)
+{
+	struct davinci_glue		*glue = platform_get_drvdata(pdev);
+
+	platform_device_unregister(glue->musb);
+	usb_phy_generic_unregister();
+	clk_disable(glue->clk);
+
+	return 0;
+}
+
+static struct platform_driver davinci_driver = {
+	.probe		= davinci_probe,
+	.remove		= davinci_remove,
+	.driver		= {
+		.name	= "musb-davinci",
+	},
+};
+
+MODULE_DESCRIPTION("DaVinci MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+module_platform_driver(davinci_driver);
diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h
new file mode 100644
index 000000000..c8e67d15b
--- /dev/null
+++ b/drivers/usb/musb/davinci.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ */
+
+#ifndef __MUSB_HDRDF_H__
+#define __MUSB_HDRDF_H__
+
+/*
+ * DaVinci-specific definitions
+ */
+
+/* Integrated highspeed/otg PHY */
+#define USBPHY_CTL_PADDR	0x01c40034
+#define USBPHY_DATAPOL		BIT(11)	/* (dm355) switch D+/D- */
+#define USBPHY_PHYCLKGD		BIT(8)
+#define USBPHY_SESNDEN		BIT(7)	/* v(sess_end) comparator */
+#define USBPHY_VBDTCTEN		BIT(6)	/* v(bus) comparator */
+#define USBPHY_VBUSSENS		BIT(5)	/* (dm355,ro) is vbus > 0.5V */
+#define USBPHY_PHYPLLON		BIT(4)	/* override pll suspend */
+#define USBPHY_CLKO1SEL		BIT(3)
+#define USBPHY_OSCPDWN		BIT(2)
+#define USBPHY_OTGPDWN		BIT(1)
+#define USBPHY_PHYPDWN		BIT(0)
+
+#define DM355_DEEPSLEEP_PADDR	0x01c40048
+#define DRVVBUS_FORCE		BIT(2)
+#define DRVVBUS_OVERRIDE	BIT(1)
+
+/* For now include usb OTG module registers here */
+#define DAVINCI_USB_VERSION_REG		0x00
+#define DAVINCI_USB_CTRL_REG		0x04
+#define DAVINCI_USB_STAT_REG		0x08
+#define DAVINCI_RNDIS_REG		0x10
+#define DAVINCI_AUTOREQ_REG		0x14
+#define DAVINCI_USB_INT_SOURCE_REG	0x20
+#define DAVINCI_USB_INT_SET_REG		0x24
+#define DAVINCI_USB_INT_SRC_CLR_REG	0x28
+#define DAVINCI_USB_INT_MASK_REG	0x2c
+#define DAVINCI_USB_INT_MASK_SET_REG	0x30
+#define DAVINCI_USB_INT_MASK_CLR_REG	0x34
+#define DAVINCI_USB_INT_SRC_MASKED_REG	0x38
+#define DAVINCI_USB_EOI_REG		0x3c
+#define DAVINCI_USB_EOI_INTVEC		0x40
+
+/* BEGIN CPPI-generic (?) */
+
+/* CPPI related registers */
+#define DAVINCI_TXCPPI_CTRL_REG		0x80
+#define DAVINCI_TXCPPI_TEAR_REG		0x84
+#define DAVINCI_CPPI_EOI_REG		0x88
+#define DAVINCI_CPPI_INTVEC_REG		0x8c
+#define DAVINCI_TXCPPI_MASKED_REG	0x90
+#define DAVINCI_TXCPPI_RAW_REG		0x94
+#define DAVINCI_TXCPPI_INTENAB_REG	0x98
+#define DAVINCI_TXCPPI_INTCLR_REG	0x9c
+
+#define DAVINCI_RXCPPI_CTRL_REG		0xC0
+#define DAVINCI_RXCPPI_MASKED_REG	0xD0
+#define DAVINCI_RXCPPI_RAW_REG		0xD4
+#define DAVINCI_RXCPPI_INTENAB_REG	0xD8
+#define DAVINCI_RXCPPI_INTCLR_REG	0xDC
+
+#define DAVINCI_RXCPPI_BUFCNT0_REG	0xE0
+#define DAVINCI_RXCPPI_BUFCNT1_REG	0xE4
+#define DAVINCI_RXCPPI_BUFCNT2_REG	0xE8
+#define DAVINCI_RXCPPI_BUFCNT3_REG	0xEC
+
+/* CPPI state RAM entries */
+#define DAVINCI_CPPI_STATERAM_BASE_OFFSET   0x100
+
+#define DAVINCI_TXCPPI_STATERAM_OFFSET(chnum) \
+	(DAVINCI_CPPI_STATERAM_BASE_OFFSET +       ((chnum) * 0x40))
+#define DAVINCI_RXCPPI_STATERAM_OFFSET(chnum) \
+	(DAVINCI_CPPI_STATERAM_BASE_OFFSET + 0x20 + ((chnum) * 0x40))
+
+/* CPPI masks */
+#define DAVINCI_DMA_CTRL_ENABLE		1
+#define DAVINCI_DMA_CTRL_DISABLE	0
+
+#define DAVINCI_DMA_ALL_CHANNELS_ENABLE	0xF
+#define DAVINCI_DMA_ALL_CHANNELS_DISABLE 0xF
+
+/* END CPPI-generic (?) */
+
+#define DAVINCI_USB_TX_ENDPTS_MASK	0x1f		/* ep0 + 4 tx */
+#define DAVINCI_USB_RX_ENDPTS_MASK	0x1e		/* 4 rx */
+
+#define DAVINCI_USB_USBINT_SHIFT	16
+#define DAVINCI_USB_TXINT_SHIFT		0
+#define DAVINCI_USB_RXINT_SHIFT		8
+
+#define DAVINCI_INTR_DRVVBUS		0x0100
+
+#define DAVINCI_USB_USBINT_MASK		0x01ff0000	/* 8 Mentor, DRVVBUS */
+#define DAVINCI_USB_TXINT_MASK \
+	(DAVINCI_USB_TX_ENDPTS_MASK << DAVINCI_USB_TXINT_SHIFT)
+#define DAVINCI_USB_RXINT_MASK \
+	(DAVINCI_USB_RX_ENDPTS_MASK << DAVINCI_USB_RXINT_SHIFT)
+
+#define DAVINCI_BASE_OFFSET		0x400
+
+#endif	/* __MUSB_HDRDF_H__ */
diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
new file mode 100644
index 000000000..d1e4e0deb
--- /dev/null
+++ b/drivers/usb/musb/jz4740.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Ingenic JZ4740 "glue layer"
+ *
+ * Copyright (C) 2013, Apelete Seketeli <apelete@seketeli.net>
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/usb/role.h>
+#include <linux/usb/usb_phy_generic.h>
+
+#include "musb_core.h"
+
+struct jz4740_glue {
+	struct platform_device	*pdev;
+	struct musb		*musb;
+	struct clk		*clk;
+	struct usb_role_switch	*role_sw;
+};
+
+static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
+{
+	unsigned long	flags;
+	irqreturn_t	retval = IRQ_NONE, retval_dma = IRQ_NONE;
+	struct musb	*musb = __hci;
+
+	if (IS_ENABLED(CONFIG_USB_INVENTRA_DMA) && musb->dma_controller)
+		retval_dma = dma_controller_irq(irq, musb->dma_controller);
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+	/*
+	 * The controller is gadget only, the state of the host mode IRQ bits is
+	 * undefined. Mask them to make sure that the musb driver core will
+	 * never see them set
+	 */
+	musb->int_usb &= MUSB_INTR_SUSPEND | MUSB_INTR_RESUME |
+			 MUSB_INTR_RESET | MUSB_INTR_SOF;
+
+	if (musb->int_usb || musb->int_tx || musb->int_rx)
+		retval = musb_interrupt(musb);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (retval == IRQ_HANDLED || retval_dma == IRQ_HANDLED)
+		return IRQ_HANDLED;
+
+	return IRQ_NONE;
+}
+
+static struct musb_fifo_cfg jz4740_musb_fifo_cfg[] = {
+	{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, },
+};
+
+static const struct musb_hdrc_config jz4740_musb_config = {
+	/* Silicon does not implement USB OTG. */
+	.multipoint	= 0,
+	/* Max EPs scanned, driver will decide which EP can be used. */
+	.num_eps	= 4,
+	/* RAMbits needed to configure EPs from table */
+	.ram_bits	= 9,
+	.fifo_cfg	= jz4740_musb_fifo_cfg,
+	.fifo_cfg_size	= ARRAY_SIZE(jz4740_musb_fifo_cfg),
+};
+
+static int jz4740_musb_role_switch_set(struct usb_role_switch *sw,
+				       enum usb_role role)
+{
+	struct jz4740_glue *glue = usb_role_switch_get_drvdata(sw);
+	struct usb_phy *phy = glue->musb->xceiv;
+
+	switch (role) {
+	case USB_ROLE_NONE:
+		atomic_notifier_call_chain(&phy->notifier, USB_EVENT_NONE, phy);
+		break;
+	case USB_ROLE_DEVICE:
+		atomic_notifier_call_chain(&phy->notifier, USB_EVENT_VBUS, phy);
+		break;
+	case USB_ROLE_HOST:
+		atomic_notifier_call_chain(&phy->notifier, USB_EVENT_ID, phy);
+		break;
+	}
+
+	return 0;
+}
+
+static int jz4740_musb_init(struct musb *musb)
+{
+	struct device *dev = musb->controller->parent;
+	struct jz4740_glue *glue = dev_get_drvdata(dev);
+	struct usb_role_switch_desc role_sw_desc = {
+		.set = jz4740_musb_role_switch_set,
+		.driver_data = glue,
+		.fwnode = dev_fwnode(dev),
+	};
+
+	glue->musb = musb;
+
+	if (dev->of_node)
+		musb->xceiv = devm_usb_get_phy_by_phandle(dev, "phys", 0);
+	else
+		musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+	if (IS_ERR(musb->xceiv))
+		return dev_err_probe(dev, PTR_ERR(musb->xceiv),
+				     "No transceiver configured\n");
+
+	glue->role_sw = usb_role_switch_register(dev, &role_sw_desc);
+	if (IS_ERR(glue->role_sw)) {
+		dev_err(dev, "Failed to register USB role switch\n");
+		return PTR_ERR(glue->role_sw);
+	}
+
+	/*
+	 * Silicon does not implement ConfigData register.
+	 * Set dyn_fifo to avoid reading EP config from hardware.
+	 */
+	musb->dyn_fifo = true;
+
+	musb->isr = jz4740_musb_interrupt;
+
+	return 0;
+}
+
+static int jz4740_musb_exit(struct musb *musb)
+{
+	struct jz4740_glue *glue = dev_get_drvdata(musb->controller->parent);
+
+	usb_role_switch_unregister(glue->role_sw);
+
+	return 0;
+}
+
+static const struct musb_platform_ops jz4740_musb_ops = {
+	.quirks		= MUSB_DMA_INVENTRA | MUSB_INDEXED_EP,
+	.fifo_mode	= 2,
+	.init		= jz4740_musb_init,
+	.exit		= jz4740_musb_exit,
+#ifdef CONFIG_USB_INVENTRA_DMA
+	.dma_init	= musbhs_dma_controller_create_noirq,
+	.dma_exit	= musbhs_dma_controller_destroy,
+#endif
+};
+
+static const struct musb_hdrc_platform_data jz4740_musb_pdata = {
+	.mode		= MUSB_PERIPHERAL,
+	.config		= &jz4740_musb_config,
+	.platform_ops	= &jz4740_musb_ops,
+};
+
+static struct musb_fifo_cfg jz4770_musb_fifo_cfg[] = {
+	{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, },
+};
+
+static struct musb_hdrc_config jz4770_musb_config = {
+	.multipoint	= 1,
+	.num_eps	= 11,
+	.ram_bits	= 11,
+	.fifo_cfg	= jz4770_musb_fifo_cfg,
+	.fifo_cfg_size	= ARRAY_SIZE(jz4770_musb_fifo_cfg),
+};
+
+static const struct musb_hdrc_platform_data jz4770_musb_pdata = {
+	.mode		= MUSB_PERIPHERAL, /* TODO: support OTG */
+	.config		= &jz4770_musb_config,
+	.platform_ops	= &jz4740_musb_ops,
+};
+
+static int jz4740_probe(struct platform_device *pdev)
+{
+	struct device			*dev = &pdev->dev;
+	const struct musb_hdrc_platform_data *pdata;
+	struct platform_device		*musb;
+	struct jz4740_glue		*glue;
+	struct clk			*clk;
+	int				ret;
+
+	glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		return -ENOMEM;
+
+	pdata = of_device_get_match_data(dev);
+	if (!pdata) {
+		dev_err(dev, "missing platform data\n");
+		return -EINVAL;
+	}
+
+	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
+	if (!musb) {
+		dev_err(dev, "failed to allocate musb device\n");
+		return -ENOMEM;
+	}
+
+	clk = devm_clk_get(dev, "udc");
+	if (IS_ERR(clk)) {
+		dev_err(dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err_platform_device_put;
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		dev_err(dev, "failed to enable clock\n");
+		goto err_platform_device_put;
+	}
+
+	musb->dev.parent		= dev;
+	musb->dev.dma_mask		= &musb->dev.coherent_dma_mask;
+	musb->dev.coherent_dma_mask	= DMA_BIT_MASK(32);
+	device_set_of_node_from_dev(&musb->dev, dev);
+
+	glue->pdev			= musb;
+	glue->clk			= clk;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+					    pdev->num_resources);
+	if (ret) {
+		dev_err(dev, "failed to add resources\n");
+		goto err_clk_disable;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(dev, "failed to add platform_data\n");
+		goto err_clk_disable;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(dev, "failed to register musb device\n");
+		goto err_clk_disable;
+	}
+
+	return 0;
+
+err_clk_disable:
+	clk_disable_unprepare(clk);
+err_platform_device_put:
+	platform_device_put(musb);
+	return ret;
+}
+
+static int jz4740_remove(struct platform_device *pdev)
+{
+	struct jz4740_glue *glue = platform_get_drvdata(pdev);
+
+	platform_device_unregister(glue->pdev);
+	clk_disable_unprepare(glue->clk);
+
+	return 0;
+}
+
+static const struct of_device_id jz4740_musb_of_match[] = {
+	{ .compatible = "ingenic,jz4740-musb", .data = &jz4740_musb_pdata },
+	{ .compatible = "ingenic,jz4770-musb", .data = &jz4770_musb_pdata },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, jz4740_musb_of_match);
+
+static struct platform_driver jz4740_driver = {
+	.probe		= jz4740_probe,
+	.remove		= jz4740_remove,
+	.driver		= {
+		.name	= "musb-jz4740",
+		.of_match_table = jz4740_musb_of_match,
+	},
+};
+
+MODULE_DESCRIPTION("JZ4740 MUSB Glue Layer");
+MODULE_AUTHOR("Apelete Seketeli <apelete@seketeli.net>");
+MODULE_LICENSE("GPL v2");
+module_platform_driver(jz4740_driver);
diff --git a/drivers/usb/musb/mediatek.c b/drivers/usb/musb/mediatek.c
new file mode 100644
index 000000000..27b9bd258
--- /dev/null
+++ b/drivers/usb/musb/mediatek.c
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ *
+ * Author:
+ *  Min Guo <min.guo@mediatek.com>
+ *  Yonglong Wu <yonglong.wu@mediatek.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/usb/role.h>
+#include <linux/usb/usb_phy_generic.h>
+#include "musb_core.h"
+#include "musb_dma.h"
+
+#define USB_L1INTS		0x00a0
+#define USB_L1INTM		0x00a4
+#define MTK_MUSB_TXFUNCADDR	0x0480
+
+/* MediaTek controller toggle enable and status reg */
+#define MUSB_RXTOG		0x80
+#define MUSB_RXTOGEN		0x82
+#define MUSB_TXTOG		0x84
+#define MUSB_TXTOGEN		0x86
+#define MTK_TOGGLE_EN		GENMASK(15, 0)
+
+#define TX_INT_STATUS		BIT(0)
+#define RX_INT_STATUS		BIT(1)
+#define USBCOM_INT_STATUS	BIT(2)
+#define DMA_INT_STATUS		BIT(3)
+
+#define DMA_INTR_STATUS_MSK	GENMASK(7, 0)
+#define DMA_INTR_UNMASK_SET_MSK	GENMASK(31, 24)
+
+#define MTK_MUSB_CLKS_NUM	3
+
+struct mtk_glue {
+	struct device *dev;
+	struct musb *musb;
+	struct platform_device *musb_pdev;
+	struct platform_device *usb_phy;
+	struct phy *phy;
+	struct usb_phy *xceiv;
+	enum phy_mode phy_mode;
+	struct clk_bulk_data clks[MTK_MUSB_CLKS_NUM];
+	enum usb_role role;
+	struct usb_role_switch *role_sw;
+};
+
+static int mtk_musb_clks_get(struct mtk_glue *glue)
+{
+	struct device *dev = glue->dev;
+
+	glue->clks[0].id = "main";
+	glue->clks[1].id = "mcu";
+	glue->clks[2].id = "univpll";
+
+	return devm_clk_bulk_get(dev, MTK_MUSB_CLKS_NUM, glue->clks);
+}
+
+static int mtk_otg_switch_set(struct mtk_glue *glue, enum usb_role role)
+{
+	struct musb *musb = glue->musb;
+	u8 devctl = readb(musb->mregs + MUSB_DEVCTL);
+	enum usb_role new_role;
+
+	if (role == glue->role)
+		return 0;
+
+	switch (role) {
+	case USB_ROLE_HOST:
+		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+		glue->phy_mode = PHY_MODE_USB_HOST;
+		new_role = USB_ROLE_HOST;
+		if (glue->role == USB_ROLE_NONE)
+			phy_power_on(glue->phy);
+
+		devctl |= MUSB_DEVCTL_SESSION;
+		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+		MUSB_HST_MODE(musb);
+		break;
+	case USB_ROLE_DEVICE:
+		musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+		glue->phy_mode = PHY_MODE_USB_DEVICE;
+		new_role = USB_ROLE_DEVICE;
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+		if (glue->role == USB_ROLE_NONE)
+			phy_power_on(glue->phy);
+
+		MUSB_DEV_MODE(musb);
+		break;
+	case USB_ROLE_NONE:
+		glue->phy_mode = PHY_MODE_USB_OTG;
+		new_role = USB_ROLE_NONE;
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+		if (glue->role != USB_ROLE_NONE)
+			phy_power_off(glue->phy);
+
+		break;
+	default:
+		dev_err(glue->dev, "Invalid State\n");
+		return -EINVAL;
+	}
+
+	glue->role = new_role;
+	phy_set_mode(glue->phy, glue->phy_mode);
+
+	return 0;
+}
+
+static int musb_usb_role_sx_set(struct usb_role_switch *sw, enum usb_role role)
+{
+	return mtk_otg_switch_set(usb_role_switch_get_drvdata(sw), role);
+}
+
+static enum usb_role musb_usb_role_sx_get(struct usb_role_switch *sw)
+{
+	struct mtk_glue *glue = usb_role_switch_get_drvdata(sw);
+
+	return glue->role;
+}
+
+static int mtk_otg_switch_init(struct mtk_glue *glue)
+{
+	struct usb_role_switch_desc role_sx_desc = { 0 };
+
+	role_sx_desc.set = musb_usb_role_sx_set;
+	role_sx_desc.get = musb_usb_role_sx_get;
+	role_sx_desc.allow_userspace_control = true;
+	role_sx_desc.fwnode = dev_fwnode(glue->dev);
+	role_sx_desc.driver_data = glue;
+	glue->role_sw = usb_role_switch_register(glue->dev, &role_sx_desc);
+
+	return PTR_ERR_OR_ZERO(glue->role_sw);
+}
+
+static void mtk_otg_switch_exit(struct mtk_glue *glue)
+{
+	return usb_role_switch_unregister(glue->role_sw);
+}
+
+static irqreturn_t generic_interrupt(int irq, void *__hci)
+{
+	unsigned long flags;
+	irqreturn_t retval = IRQ_NONE;
+	struct musb *musb = __hci;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb->int_usb = musb_clearb(musb->mregs, MUSB_INTRUSB);
+	musb->int_rx = musb_clearw(musb->mregs, MUSB_INTRRX);
+	musb->int_tx = musb_clearw(musb->mregs, MUSB_INTRTX);
+
+	if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) {
+		/* ep0 FADDR must be 0 when (re)entering peripheral mode */
+		musb_ep_select(musb->mregs, 0);
+		musb_writeb(musb->mregs, MUSB_FADDR, 0);
+	}
+
+	if (musb->int_usb || musb->int_tx || musb->int_rx)
+		retval = musb_interrupt(musb);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return retval;
+}
+
+static irqreturn_t mtk_musb_interrupt(int irq, void *dev_id)
+{
+	irqreturn_t retval = IRQ_NONE;
+	struct musb *musb = (struct musb *)dev_id;
+	u32 l1_ints;
+
+	l1_ints = musb_readl(musb->mregs, USB_L1INTS) &
+			musb_readl(musb->mregs, USB_L1INTM);
+
+	if (l1_ints & (TX_INT_STATUS | RX_INT_STATUS | USBCOM_INT_STATUS))
+		retval = generic_interrupt(irq, musb);
+
+#if defined(CONFIG_USB_INVENTRA_DMA)
+	if (l1_ints & DMA_INT_STATUS)
+		retval = dma_controller_irq(irq, musb->dma_controller);
+#endif
+	return retval;
+}
+
+static u32 mtk_musb_busctl_offset(u8 epnum, u16 offset)
+{
+	return MTK_MUSB_TXFUNCADDR + offset + 8 * epnum;
+}
+
+static u8 mtk_musb_clearb(void __iomem *addr, unsigned int offset)
+{
+	u8 data;
+
+	/* W1C */
+	data = musb_readb(addr, offset);
+	musb_writeb(addr, offset, data);
+	return data;
+}
+
+static u16 mtk_musb_clearw(void __iomem *addr, unsigned int offset)
+{
+	u16 data;
+
+	/* W1C */
+	data = musb_readw(addr, offset);
+	musb_writew(addr, offset, data);
+	return data;
+}
+
+static int mtk_musb_set_mode(struct musb *musb, u8 mode)
+{
+	struct device *dev = musb->controller;
+	struct mtk_glue *glue = dev_get_drvdata(dev->parent);
+	enum phy_mode new_mode;
+	enum usb_role new_role;
+
+	switch (mode) {
+	case MUSB_HOST:
+		new_mode = PHY_MODE_USB_HOST;
+		new_role = USB_ROLE_HOST;
+		break;
+	case MUSB_PERIPHERAL:
+		new_mode = PHY_MODE_USB_DEVICE;
+		new_role = USB_ROLE_DEVICE;
+		break;
+	case MUSB_OTG:
+		new_mode = PHY_MODE_USB_OTG;
+		new_role = USB_ROLE_NONE;
+		break;
+	default:
+		dev_err(glue->dev, "Invalid mode request\n");
+		return -EINVAL;
+	}
+
+	if (glue->phy_mode == new_mode)
+		return 0;
+
+	if (musb->port_mode != MUSB_OTG) {
+		dev_err(glue->dev, "Does not support changing modes\n");
+		return -EINVAL;
+	}
+
+	mtk_otg_switch_set(glue, new_role);
+	return 0;
+}
+
+static int mtk_musb_init(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct mtk_glue *glue = dev_get_drvdata(dev->parent);
+	int ret;
+
+	glue->musb = musb;
+	musb->phy = glue->phy;
+	musb->xceiv = glue->xceiv;
+	musb->is_host = false;
+	musb->isr = mtk_musb_interrupt;
+
+	/* Set TX/RX toggle enable */
+	musb_writew(musb->mregs, MUSB_TXTOGEN, MTK_TOGGLE_EN);
+	musb_writew(musb->mregs, MUSB_RXTOGEN, MTK_TOGGLE_EN);
+
+	if (musb->port_mode == MUSB_OTG) {
+		ret = mtk_otg_switch_init(glue);
+		if (ret)
+			return ret;
+	}
+
+	ret = phy_init(glue->phy);
+	if (ret)
+		goto err_phy_init;
+
+	ret = phy_power_on(glue->phy);
+	if (ret)
+		goto err_phy_power_on;
+
+	phy_set_mode(glue->phy, glue->phy_mode);
+
+#if defined(CONFIG_USB_INVENTRA_DMA)
+	musb_writel(musb->mregs, MUSB_HSDMA_INTR,
+		    DMA_INTR_STATUS_MSK | DMA_INTR_UNMASK_SET_MSK);
+#endif
+	musb_writel(musb->mregs, USB_L1INTM, TX_INT_STATUS | RX_INT_STATUS |
+		    USBCOM_INT_STATUS | DMA_INT_STATUS);
+	return 0;
+
+err_phy_power_on:
+	phy_exit(glue->phy);
+err_phy_init:
+	if (musb->port_mode == MUSB_OTG)
+		mtk_otg_switch_exit(glue);
+	return ret;
+}
+
+static u16 mtk_musb_get_toggle(struct musb_qh *qh, int is_out)
+{
+	struct musb *musb = qh->hw_ep->musb;
+	u8 epnum = qh->hw_ep->epnum;
+	u16 toggle;
+
+	toggle = musb_readw(musb->mregs, is_out ? MUSB_TXTOG : MUSB_RXTOG);
+	return toggle & (1 << epnum);
+}
+
+static u16 mtk_musb_set_toggle(struct musb_qh *qh, int is_out, struct urb *urb)
+{
+	struct musb *musb = qh->hw_ep->musb;
+	u8 epnum = qh->hw_ep->epnum;
+	u16 value, toggle;
+
+	toggle = usb_gettoggle(urb->dev, qh->epnum, is_out);
+
+	if (is_out) {
+		value = musb_readw(musb->mregs, MUSB_TXTOG);
+		value |= toggle << epnum;
+		musb_writew(musb->mregs, MUSB_TXTOG, value);
+	} else {
+		value = musb_readw(musb->mregs, MUSB_RXTOG);
+		value |= toggle << epnum;
+		musb_writew(musb->mregs, MUSB_RXTOG, value);
+	}
+
+	return 0;
+}
+
+static int mtk_musb_exit(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct mtk_glue *glue = dev_get_drvdata(dev->parent);
+
+	mtk_otg_switch_exit(glue);
+	phy_power_off(glue->phy);
+	phy_exit(glue->phy);
+	clk_bulk_disable_unprepare(MTK_MUSB_CLKS_NUM, glue->clks);
+
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+	return 0;
+}
+
+static const struct musb_platform_ops mtk_musb_ops = {
+	.quirks = MUSB_DMA_INVENTRA,
+	.init = mtk_musb_init,
+	.get_toggle = mtk_musb_get_toggle,
+	.set_toggle = mtk_musb_set_toggle,
+	.exit = mtk_musb_exit,
+#ifdef CONFIG_USB_INVENTRA_DMA
+	.dma_init = musbhs_dma_controller_create_noirq,
+	.dma_exit = musbhs_dma_controller_destroy,
+#endif
+	.clearb = mtk_musb_clearb,
+	.clearw = mtk_musb_clearw,
+	.busctl_offset = mtk_musb_busctl_offset,
+	.set_mode = mtk_musb_set_mode,
+};
+
+#define MTK_MUSB_MAX_EP_NUM	8
+#define MTK_MUSB_RAM_BITS	11
+
+static struct musb_fifo_cfg mtk_musb_mode_cfg[] = {
+	{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 1024, },
+	{ .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 1024, },
+	{ .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 64, },
+};
+
+static const struct musb_hdrc_config mtk_musb_hdrc_config = {
+	.fifo_cfg = mtk_musb_mode_cfg,
+	.fifo_cfg_size = ARRAY_SIZE(mtk_musb_mode_cfg),
+	.multipoint = true,
+	.dyn_fifo = true,
+	.num_eps = MTK_MUSB_MAX_EP_NUM,
+	.ram_bits = MTK_MUSB_RAM_BITS,
+};
+
+static const struct platform_device_info mtk_dev_info = {
+	.name = "musb-hdrc",
+	.id = PLATFORM_DEVID_AUTO,
+	.dma_mask = DMA_BIT_MASK(32),
+};
+
+static int mtk_musb_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data *pdata;
+	struct mtk_glue *glue;
+	struct platform_device_info pinfo;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		return -ENOMEM;
+
+	glue->dev = dev;
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	ret = of_platform_populate(np, NULL, NULL, dev);
+	if (ret) {
+		dev_err(dev, "failed to create child devices at %p\n", np);
+		return ret;
+	}
+
+	ret = mtk_musb_clks_get(glue);
+	if (ret)
+		return ret;
+
+	pdata->config = &mtk_musb_hdrc_config;
+	pdata->platform_ops = &mtk_musb_ops;
+	pdata->mode = usb_get_dr_mode(dev);
+
+	if (IS_ENABLED(CONFIG_USB_MUSB_HOST))
+		pdata->mode = USB_DR_MODE_HOST;
+	else if (IS_ENABLED(CONFIG_USB_MUSB_GADGET))
+		pdata->mode = USB_DR_MODE_PERIPHERAL;
+
+	switch (pdata->mode) {
+	case USB_DR_MODE_HOST:
+		glue->phy_mode = PHY_MODE_USB_HOST;
+		glue->role = USB_ROLE_HOST;
+		break;
+	case USB_DR_MODE_PERIPHERAL:
+		glue->phy_mode = PHY_MODE_USB_DEVICE;
+		glue->role = USB_ROLE_DEVICE;
+		break;
+	case USB_DR_MODE_OTG:
+		glue->phy_mode = PHY_MODE_USB_OTG;
+		glue->role = USB_ROLE_NONE;
+		break;
+	default:
+		dev_err(&pdev->dev, "Error 'dr_mode' property\n");
+		return -EINVAL;
+	}
+
+	glue->phy = devm_of_phy_get_by_index(dev, np, 0);
+	if (IS_ERR(glue->phy)) {
+		dev_err(dev, "fail to getting phy %ld\n",
+			PTR_ERR(glue->phy));
+		return PTR_ERR(glue->phy);
+	}
+
+	glue->usb_phy = usb_phy_generic_register();
+	if (IS_ERR(glue->usb_phy)) {
+		dev_err(dev, "fail to registering usb-phy %ld\n",
+			PTR_ERR(glue->usb_phy));
+		return PTR_ERR(glue->usb_phy);
+	}
+
+	glue->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+	if (IS_ERR(glue->xceiv)) {
+		ret = PTR_ERR(glue->xceiv);
+		dev_err(dev, "fail to getting usb-phy %d\n", ret);
+		goto err_unregister_usb_phy;
+	}
+
+	platform_set_drvdata(pdev, glue);
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	ret = clk_bulk_prepare_enable(MTK_MUSB_CLKS_NUM, glue->clks);
+	if (ret)
+		goto err_enable_clk;
+
+	pinfo = mtk_dev_info;
+	pinfo.parent = dev;
+	pinfo.res = pdev->resource;
+	pinfo.num_res = pdev->num_resources;
+	pinfo.data = pdata;
+	pinfo.size_data = sizeof(*pdata);
+	pinfo.fwnode = of_fwnode_handle(np);
+	pinfo.of_node_reused = true;
+
+	glue->musb_pdev = platform_device_register_full(&pinfo);
+	if (IS_ERR(glue->musb_pdev)) {
+		ret = PTR_ERR(glue->musb_pdev);
+		dev_err(dev, "failed to register musb device: %d\n", ret);
+		goto err_device_register;
+	}
+
+	return 0;
+
+err_device_register:
+	clk_bulk_disable_unprepare(MTK_MUSB_CLKS_NUM, glue->clks);
+err_enable_clk:
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+err_unregister_usb_phy:
+	usb_phy_generic_unregister(glue->usb_phy);
+	return ret;
+}
+
+static int mtk_musb_remove(struct platform_device *pdev)
+{
+	struct mtk_glue *glue = platform_get_drvdata(pdev);
+	struct platform_device *usb_phy = glue->usb_phy;
+
+	platform_device_unregister(glue->musb_pdev);
+	usb_phy_generic_unregister(usb_phy);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id mtk_musb_match[] = {
+	{.compatible = "mediatek,mtk-musb",},
+	{},
+};
+MODULE_DEVICE_TABLE(of, mtk_musb_match);
+#endif
+
+static struct platform_driver mtk_musb_driver = {
+	.probe = mtk_musb_probe,
+	.remove = mtk_musb_remove,
+	.driver = {
+		   .name = "musb-mtk",
+		   .of_match_table = of_match_ptr(mtk_musb_match),
+	},
+};
+
+module_platform_driver(mtk_musb_driver);
+
+MODULE_DESCRIPTION("MediaTek MUSB Glue Layer");
+MODULE_AUTHOR("Min Guo <min.guo@mediatek.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/musb/mpfs.c b/drivers/usb/musb/mpfs.c
new file mode 100644
index 000000000..cea2e8108
--- /dev/null
+++ b/drivers/usb/musb/mpfs.c
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PolarFire SoC (MPFS) MUSB Glue Layer
+ *
+ * Copyright (c) 2020-2022 Microchip Corporation. All rights reserved.
+ * Based on {omap2430,tusb6010,ux500}.c
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/usb_phy_generic.h>
+#include "musb_core.h"
+#include "musb_dma.h"
+
+#define MPFS_MUSB_MAX_EP_NUM	8
+#define MPFS_MUSB_RAM_BITS	12
+
+struct mpfs_glue {
+	struct device *dev;
+	struct platform_device *musb;
+	struct platform_device *phy;
+	struct clk *clk;
+};
+
+static struct musb_fifo_cfg mpfs_musb_mode_cfg[] = {
+	{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 1024, },
+	{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 4096, },
+};
+
+static const struct musb_hdrc_config mpfs_musb_hdrc_config = {
+	.fifo_cfg = mpfs_musb_mode_cfg,
+	.fifo_cfg_size = ARRAY_SIZE(mpfs_musb_mode_cfg),
+	.multipoint = true,
+	.dyn_fifo = true,
+	.num_eps = MPFS_MUSB_MAX_EP_NUM,
+	.ram_bits = MPFS_MUSB_RAM_BITS,
+};
+
+static irqreturn_t mpfs_musb_interrupt(int irq, void *__hci)
+{
+	unsigned long flags;
+	irqreturn_t ret = IRQ_NONE;
+	struct musb *musb = __hci;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+	if (musb->int_usb || musb->int_tx || musb->int_rx) {
+		musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb);
+		musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx);
+		musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx);
+		ret = musb_interrupt(musb);
+	}
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return ret;
+}
+
+static void mpfs_musb_set_vbus(struct musb *musb, int is_on)
+{
+	u8 devctl;
+
+	/*
+	 * HDRC controls CPEN, but beware current surges during device
+	 * connect.  They can trigger transient overcurrent conditions
+	 * that must be ignored.
+	 */
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	if (is_on) {
+		musb->is_active = 1;
+		musb->xceiv->otg->default_a = 1;
+		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+		devctl |= MUSB_DEVCTL_SESSION;
+		MUSB_HST_MODE(musb);
+	} else {
+		musb->is_active = 0;
+
+		/*
+		 * NOTE:  skipping A_WAIT_VFALL -> A_IDLE and
+		 * jumping right to B_IDLE...
+		 */
+		musb->xceiv->otg->default_a = 0;
+		musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+		devctl &= ~MUSB_DEVCTL_SESSION;
+
+		MUSB_DEV_MODE(musb);
+	}
+
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
+		usb_otg_state_string(musb->xceiv->otg->state),
+		musb_readb(musb->mregs, MUSB_DEVCTL));
+}
+
+static int mpfs_musb_init(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+
+	musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+	if (IS_ERR(musb->xceiv)) {
+		dev_err(dev, "HS UDC: no transceiver configured\n");
+		return PTR_ERR(musb->xceiv);
+	}
+
+	musb->dyn_fifo = true;
+	musb->isr = mpfs_musb_interrupt;
+
+	musb_platform_set_vbus(musb, 1);
+
+	return 0;
+}
+
+static const struct musb_platform_ops mpfs_ops = {
+	.quirks		= MUSB_DMA_INVENTRA,
+	.init		= mpfs_musb_init,
+	.fifo_mode	= 2,
+#ifdef CONFIG_USB_INVENTRA_DMA
+	.dma_init	= musbhs_dma_controller_create,
+	.dma_exit	= musbhs_dma_controller_destroy,
+#endif
+	.set_vbus	= mpfs_musb_set_vbus
+};
+
+static int mpfs_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct mpfs_glue *glue;
+	struct platform_device *musb_pdev;
+	struct device *dev = &pdev->dev;
+	struct clk *clk;
+	int ret;
+
+	glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		return -ENOMEM;
+
+	musb_pdev = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
+	if (!musb_pdev) {
+		dev_err(dev, "failed to allocate musb device\n");
+		return -ENOMEM;
+	}
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err_phy_release;
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err_phy_release;
+	}
+
+	musb_pdev->dev.parent = dev;
+	musb_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(39);
+	musb_pdev->dev.dma_mask = &musb_pdev->dev.coherent_dma_mask;
+	device_set_of_node_from_dev(&musb_pdev->dev, dev);
+
+	glue->dev = dev;
+	glue->musb = musb_pdev;
+	glue->clk = clk;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		ret = -ENOMEM;
+		goto err_clk_disable;
+	}
+
+	pdata->config = &mpfs_musb_hdrc_config;
+	pdata->platform_ops = &mpfs_ops;
+
+	pdata->mode = usb_get_dr_mode(dev);
+	if (pdata->mode == USB_DR_MODE_UNKNOWN) {
+		dev_info(dev, "No dr_mode property found, defaulting to otg\n");
+		pdata->mode = USB_DR_MODE_OTG;
+	}
+
+	glue->phy = usb_phy_generic_register();
+	if (IS_ERR(glue->phy)) {
+		dev_err(dev, "failed to register usb-phy %ld\n",
+			PTR_ERR(glue->phy));
+		ret = PTR_ERR(glue->phy);
+		goto err_clk_disable;
+	}
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb_pdev, pdev->resource, pdev->num_resources);
+	if (ret) {
+		dev_err(dev, "failed to add resources\n");
+		goto err_clk_disable;
+	}
+
+	ret = platform_device_add_data(musb_pdev, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(dev, "failed to add platform_data\n");
+		goto err_clk_disable;
+	}
+
+	ret = platform_device_add(musb_pdev);
+	if (ret) {
+		dev_err(dev, "failed to register musb device\n");
+		goto err_clk_disable;
+	}
+
+	dev_info(&pdev->dev, "Registered MPFS MUSB driver\n");
+	return 0;
+
+err_clk_disable:
+	clk_disable_unprepare(clk);
+
+err_phy_release:
+	usb_phy_generic_unregister(glue->phy);
+	platform_device_put(musb_pdev);
+	return ret;
+}
+
+static int mpfs_remove(struct platform_device *pdev)
+{
+	struct mpfs_glue *glue = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(glue->clk);
+	platform_device_unregister(glue->musb);
+	usb_phy_generic_unregister(pdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id mpfs_id_table[] = {
+	{ .compatible = "microchip,mpfs-musb" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mpfs_id_table);
+#endif
+
+static struct platform_driver mpfs_musb_driver = {
+	.probe = mpfs_probe,
+	.remove = mpfs_remove,
+	.driver = {
+		.name = "mpfs-musb",
+		.of_match_table = of_match_ptr(mpfs_id_table)
+	},
+};
+
+module_platform_driver(mpfs_musb_driver);
+
+MODULE_DESCRIPTION("PolarFire SoC MUSB Glue Layer");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
new file mode 100644
index 000000000..03027c6fa
--- /dev/null
+++ b/drivers/usb/musb/musb_core.c
@@ -0,0 +1,2966 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MUSB OTG driver core code
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ */
+
+/*
+ * Inventra (Multipoint) Dual-Role Controller Driver for Linux.
+ *
+ * This consists of a Host Controller Driver (HCD) and a peripheral
+ * controller driver implementing the "Gadget" API; OTG support is
+ * in the works.  These are normal Linux-USB controller drivers which
+ * use IRQs and have no dedicated thread.
+ *
+ * This version of the driver has only been used with products from
+ * Texas Instruments.  Those products integrate the Inventra logic
+ * with other DMA, IRQ, and bus modules, as well as other logic that
+ * needs to be reflected in this driver.
+ *
+ *
+ * NOTE:  the original Mentor code here was pretty much a collection
+ * of mechanisms that don't seem to have been fully integrated/working
+ * for *any* Linux kernel version.  This version aims at Linux 2.6.now,
+ * Key open issues include:
+ *
+ *  - Lack of host-side transaction scheduling, for all transfer types.
+ *    The hardware doesn't do it; instead, software must.
+ *
+ *    This is not an issue for OTG devices that don't support external
+ *    hubs, but for more "normal" USB hosts it's a user issue that the
+ *    "multipoint" support doesn't scale in the expected ways.  That
+ *    includes DaVinci EVM in a common non-OTG mode.
+ *
+ *      * Control and bulk use dedicated endpoints, and there's as
+ *        yet no mechanism to either (a) reclaim the hardware when
+ *        peripherals are NAKing, which gets complicated with bulk
+ *        endpoints, or (b) use more than a single bulk endpoint in
+ *        each direction.
+ *
+ *        RESULT:  one device may be perceived as blocking another one.
+ *
+ *      * Interrupt and isochronous will dynamically allocate endpoint
+ *        hardware, but (a) there's no record keeping for bandwidth;
+ *        (b) in the common case that few endpoints are available, there
+ *        is no mechanism to reuse endpoints to talk to multiple devices.
+ *
+ *        RESULT:  At one extreme, bandwidth can be overcommitted in
+ *        some hardware configurations, no faults will be reported.
+ *        At the other extreme, the bandwidth capabilities which do
+ *        exist tend to be severely undercommitted.  You can't yet hook
+ *        up both a keyboard and a mouse to an external USB hub.
+ */
+
+/*
+ * This gets many kinds of configuration information:
+ *	- Kconfig for everything user-configurable
+ *	- platform_device for addressing, irq, and platform_data
+ *	- platform_data is mostly for board-specific information
+ *	  (plus recentrly, SOC or family details)
+ *
+ * Most of the conditional compilation will (someday) vanish.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/prefetch.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb.h>
+#include <linux/usb/of.h>
+
+#include "musb_core.h"
+#include "musb_trace.h"
+
+#define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON)
+
+
+#define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
+#define DRIVER_DESC "Inventra Dual-Role USB Controller Driver"
+
+#define MUSB_VERSION "6.0"
+
+#define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
+
+#define MUSB_DRIVER_NAME "musb-hdrc"
+const char musb_driver_name[] = MUSB_DRIVER_NAME;
+
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
+
+
+/*-------------------------------------------------------------------------*/
+
+static inline struct musb *dev_to_musb(struct device *dev)
+{
+	return dev_get_drvdata(dev);
+}
+
+enum musb_mode musb_get_mode(struct device *dev)
+{
+	enum usb_dr_mode mode;
+
+	mode = usb_get_dr_mode(dev);
+	switch (mode) {
+	case USB_DR_MODE_HOST:
+		return MUSB_HOST;
+	case USB_DR_MODE_PERIPHERAL:
+		return MUSB_PERIPHERAL;
+	case USB_DR_MODE_OTG:
+	case USB_DR_MODE_UNKNOWN:
+	default:
+		return MUSB_OTG;
+	}
+}
+EXPORT_SYMBOL_GPL(musb_get_mode);
+
+/*-------------------------------------------------------------------------*/
+
+static int musb_ulpi_read(struct usb_phy *phy, u32 reg)
+{
+	void __iomem *addr = phy->io_priv;
+	int	i = 0;
+	u8	r;
+	u8	power;
+	int	ret;
+
+	pm_runtime_get_sync(phy->io_dev);
+
+	/* Make sure the transceiver is not in low power mode */
+	power = musb_readb(addr, MUSB_POWER);
+	power &= ~MUSB_POWER_SUSPENDM;
+	musb_writeb(addr, MUSB_POWER, power);
+
+	/* REVISIT: musbhdrc_ulpi_an.pdf recommends setting the
+	 * ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM.
+	 */
+
+	musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg);
+	musb_writeb(addr, MUSB_ULPI_REG_CONTROL,
+			MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR);
+
+	while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
+				& MUSB_ULPI_REG_CMPLT)) {
+		i++;
+		if (i == 10000) {
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+
+	}
+	r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
+	r &= ~MUSB_ULPI_REG_CMPLT;
+	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
+
+	ret = musb_readb(addr, MUSB_ULPI_REG_DATA);
+
+out:
+	pm_runtime_put(phy->io_dev);
+
+	return ret;
+}
+
+static int musb_ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
+{
+	void __iomem *addr = phy->io_priv;
+	int	i = 0;
+	u8	r = 0;
+	u8	power;
+	int	ret = 0;
+
+	pm_runtime_get_sync(phy->io_dev);
+
+	/* Make sure the transceiver is not in low power mode */
+	power = musb_readb(addr, MUSB_POWER);
+	power &= ~MUSB_POWER_SUSPENDM;
+	musb_writeb(addr, MUSB_POWER, power);
+
+	musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg);
+	musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)val);
+	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ);
+
+	while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
+				& MUSB_ULPI_REG_CMPLT)) {
+		i++;
+		if (i == 10000) {
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+	}
+
+	r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
+	r &= ~MUSB_ULPI_REG_CMPLT;
+	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
+
+out:
+	pm_runtime_put(phy->io_dev);
+
+	return ret;
+}
+
+static struct usb_phy_io_ops musb_ulpi_access = {
+	.read = musb_ulpi_read,
+	.write = musb_ulpi_write,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static u32 musb_default_fifo_offset(u8 epnum)
+{
+	return 0x20 + (epnum * 4);
+}
+
+/* "flat" mapping: each endpoint has its own i/o address */
+static void musb_flat_ep_select(void __iomem *mbase, u8 epnum)
+{
+}
+
+static u32 musb_flat_ep_offset(u8 epnum, u16 offset)
+{
+	return 0x100 + (0x10 * epnum) + offset;
+}
+
+/* "indexed" mapping: INDEX register controls register bank select */
+static void musb_indexed_ep_select(void __iomem *mbase, u8 epnum)
+{
+	musb_writeb(mbase, MUSB_INDEX, epnum);
+}
+
+static u32 musb_indexed_ep_offset(u8 epnum, u16 offset)
+{
+	return 0x10 + offset;
+}
+
+static u32 musb_default_busctl_offset(u8 epnum, u16 offset)
+{
+	return 0x80 + (0x08 * epnum) + offset;
+}
+
+static u8 musb_default_readb(void __iomem *addr, u32 offset)
+{
+	u8 data =  __raw_readb(addr + offset);
+
+	trace_musb_readb(__builtin_return_address(0), addr, offset, data);
+	return data;
+}
+
+static void musb_default_writeb(void __iomem *addr, u32 offset, u8 data)
+{
+	trace_musb_writeb(__builtin_return_address(0), addr, offset, data);
+	__raw_writeb(data, addr + offset);
+}
+
+static u16 musb_default_readw(void __iomem *addr, u32 offset)
+{
+	u16 data = __raw_readw(addr + offset);
+
+	trace_musb_readw(__builtin_return_address(0), addr, offset, data);
+	return data;
+}
+
+static void musb_default_writew(void __iomem *addr, u32 offset, u16 data)
+{
+	trace_musb_writew(__builtin_return_address(0), addr, offset, data);
+	__raw_writew(data, addr + offset);
+}
+
+static u16 musb_default_get_toggle(struct musb_qh *qh, int is_out)
+{
+	void __iomem *epio = qh->hw_ep->regs;
+	u16 csr;
+
+	if (is_out)
+		csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE;
+	else
+		csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE;
+
+	return csr;
+}
+
+static u16 musb_default_set_toggle(struct musb_qh *qh, int is_out,
+				   struct urb *urb)
+{
+	u16 csr;
+	u16 toggle;
+
+	toggle = usb_gettoggle(urb->dev, qh->epnum, is_out);
+
+	if (is_out)
+		csr = toggle ? (MUSB_TXCSR_H_WR_DATATOGGLE
+				| MUSB_TXCSR_H_DATATOGGLE)
+				: MUSB_TXCSR_CLRDATATOG;
+	else
+		csr = toggle ? (MUSB_RXCSR_H_WR_DATATOGGLE
+				| MUSB_RXCSR_H_DATATOGGLE) : 0;
+
+	return csr;
+}
+
+/*
+ * Load an endpoint's FIFO
+ */
+static void musb_default_write_fifo(struct musb_hw_ep *hw_ep, u16 len,
+				    const u8 *src)
+{
+	struct musb *musb = hw_ep->musb;
+	void __iomem *fifo = hw_ep->fifo;
+
+	if (unlikely(len == 0))
+		return;
+
+	prefetch((u8 *)src);
+
+	dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
+			'T', hw_ep->epnum, fifo, len, src);
+
+	/* we can't assume unaligned reads work */
+	if (likely((0x01 & (unsigned long) src) == 0)) {
+		u16	index = 0;
+
+		/* best case is 32bit-aligned source address */
+		if ((0x02 & (unsigned long) src) == 0) {
+			if (len >= 4) {
+				iowrite32_rep(fifo, src + index, len >> 2);
+				index += len & ~0x03;
+			}
+			if (len & 0x02) {
+				__raw_writew(*(u16 *)&src[index], fifo);
+				index += 2;
+			}
+		} else {
+			if (len >= 2) {
+				iowrite16_rep(fifo, src + index, len >> 1);
+				index += len & ~0x01;
+			}
+		}
+		if (len & 0x01)
+			__raw_writeb(src[index], fifo);
+	} else  {
+		/* byte aligned */
+		iowrite8_rep(fifo, src, len);
+	}
+}
+
+/*
+ * Unload an endpoint's FIFO
+ */
+static void musb_default_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+	struct musb *musb = hw_ep->musb;
+	void __iomem *fifo = hw_ep->fifo;
+
+	if (unlikely(len == 0))
+		return;
+
+	dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
+			'R', hw_ep->epnum, fifo, len, dst);
+
+	/* we can't assume unaligned writes work */
+	if (likely((0x01 & (unsigned long) dst) == 0)) {
+		u16	index = 0;
+
+		/* best case is 32bit-aligned destination address */
+		if ((0x02 & (unsigned long) dst) == 0) {
+			if (len >= 4) {
+				ioread32_rep(fifo, dst, len >> 2);
+				index = len & ~0x03;
+			}
+			if (len & 0x02) {
+				*(u16 *)&dst[index] = __raw_readw(fifo);
+				index += 2;
+			}
+		} else {
+			if (len >= 2) {
+				ioread16_rep(fifo, dst, len >> 1);
+				index = len & ~0x01;
+			}
+		}
+		if (len & 0x01)
+			dst[index] = __raw_readb(fifo);
+	} else  {
+		/* byte aligned */
+		ioread8_rep(fifo, dst, len);
+	}
+}
+
+/*
+ * Old style IO functions
+ */
+u8 (*musb_readb)(void __iomem *addr, u32 offset);
+EXPORT_SYMBOL_GPL(musb_readb);
+
+void (*musb_writeb)(void __iomem *addr, u32 offset, u8 data);
+EXPORT_SYMBOL_GPL(musb_writeb);
+
+u8 (*musb_clearb)(void __iomem *addr, u32 offset);
+EXPORT_SYMBOL_GPL(musb_clearb);
+
+u16 (*musb_readw)(void __iomem *addr, u32 offset);
+EXPORT_SYMBOL_GPL(musb_readw);
+
+void (*musb_writew)(void __iomem *addr, u32 offset, u16 data);
+EXPORT_SYMBOL_GPL(musb_writew);
+
+u16 (*musb_clearw)(void __iomem *addr, u32 offset);
+EXPORT_SYMBOL_GPL(musb_clearw);
+
+u32 musb_readl(void __iomem *addr, u32 offset)
+{
+	u32 data = __raw_readl(addr + offset);
+
+	trace_musb_readl(__builtin_return_address(0), addr, offset, data);
+	return data;
+}
+EXPORT_SYMBOL_GPL(musb_readl);
+
+void musb_writel(void __iomem *addr, u32 offset, u32 data)
+{
+	trace_musb_writel(__builtin_return_address(0), addr, offset, data);
+	__raw_writel(data, addr + offset);
+}
+EXPORT_SYMBOL_GPL(musb_writel);
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+struct dma_controller *
+(*musb_dma_controller_create)(struct musb *musb, void __iomem *base);
+EXPORT_SYMBOL(musb_dma_controller_create);
+
+void (*musb_dma_controller_destroy)(struct dma_controller *c);
+EXPORT_SYMBOL(musb_dma_controller_destroy);
+#endif
+
+/*
+ * New style IO functions
+ */
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+	return hw_ep->musb->io.read_fifo(hw_ep, len, dst);
+}
+
+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
+{
+	return hw_ep->musb->io.write_fifo(hw_ep, len, src);
+}
+
+static u8 musb_read_devctl(struct musb *musb)
+{
+	return musb_readb(musb->mregs, MUSB_DEVCTL);
+}
+
+/**
+ * musb_set_host - set and initialize host mode
+ * @musb: musb controller driver data
+ *
+ * At least some musb revisions need to enable devctl session bit in
+ * peripheral mode to switch to host mode. Initializes things to host
+ * mode and sets A_IDLE. SoC glue needs to advance state further
+ * based on phy provided VBUS state.
+ *
+ * Note that the SoC glue code may need to wait for musb to settle
+ * on enable before calling this to avoid babble.
+ */
+int musb_set_host(struct musb *musb)
+{
+	int error = 0;
+	u8 devctl;
+
+	if (!musb)
+		return -EINVAL;
+
+	devctl = musb_read_devctl(musb);
+	if (!(devctl & MUSB_DEVCTL_BDEVICE)) {
+		trace_musb_state(musb, devctl, "Already in host mode");
+		goto init_data;
+	}
+
+	devctl |= MUSB_DEVCTL_SESSION;
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	error = readx_poll_timeout(musb_read_devctl, musb, devctl,
+				   !(devctl & MUSB_DEVCTL_BDEVICE), 5000,
+				   1000000);
+	if (error) {
+		dev_err(musb->controller, "%s: could not set host: %02x\n",
+			__func__, devctl);
+
+		return error;
+	}
+
+	devctl = musb_read_devctl(musb);
+	trace_musb_state(musb, devctl, "Host mode set");
+
+init_data:
+	musb->is_active = 1;
+	musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+	MUSB_HST_MODE(musb);
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(musb_set_host);
+
+/**
+ * musb_set_peripheral - set and initialize peripheral mode
+ * @musb: musb controller driver data
+ *
+ * Clears devctl session bit and initializes things for peripheral
+ * mode and sets B_IDLE. SoC glue needs to advance state further
+ * based on phy provided VBUS state.
+ */
+int musb_set_peripheral(struct musb *musb)
+{
+	int error = 0;
+	u8 devctl;
+
+	if (!musb)
+		return -EINVAL;
+
+	devctl = musb_read_devctl(musb);
+	if (devctl & MUSB_DEVCTL_BDEVICE) {
+		trace_musb_state(musb, devctl, "Already in peripheral mode");
+		goto init_data;
+	}
+
+	devctl &= ~MUSB_DEVCTL_SESSION;
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	error = readx_poll_timeout(musb_read_devctl, musb, devctl,
+				   devctl & MUSB_DEVCTL_BDEVICE, 5000,
+				   1000000);
+	if (error) {
+		dev_err(musb->controller, "%s: could not set peripheral: %02x\n",
+			__func__, devctl);
+
+		return error;
+	}
+
+	devctl = musb_read_devctl(musb);
+	trace_musb_state(musb, devctl, "Peripheral mode set");
+
+init_data:
+	musb->is_active = 0;
+	musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+	MUSB_DEV_MODE(musb);
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(musb_set_peripheral);
+
+/*-------------------------------------------------------------------------*/
+
+/* for high speed test mode; see USB 2.0 spec 7.1.20 */
+static const u8 musb_test_packet[53] = {
+	/* implicit SYNC then DATA0 to start */
+
+	/* JKJKJKJK x9 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* JJKKJJKK x8 */
+	0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+	/* JJJJKKKK x8 */
+	0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee,
+	/* JJJJJJJKKKKKKK x8 */
+	0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	/* JJJJJJJK x8 */
+	0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd,
+	/* JKKKKKKK x10, JK */
+	0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e
+
+	/* implicit CRC16 then EOP to end */
+};
+
+void musb_load_testpacket(struct musb *musb)
+{
+	void __iomem	*regs = musb->endpoints[0].regs;
+
+	musb_ep_select(musb->mregs, 0);
+	musb_write_fifo(musb->control_ep,
+			sizeof(musb_test_packet), musb_test_packet);
+	musb_writew(regs, MUSB_CSR0, MUSB_CSR0_TXPKTRDY);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Handles OTG hnp timeouts, such as b_ase0_brst
+ */
+static void musb_otg_timer_func(struct timer_list *t)
+{
+	struct musb	*musb = from_timer(musb, t, otg_timer);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_B_WAIT_ACON:
+		musb_dbg(musb,
+			"HNP: b_wait_acon timeout; back to b_peripheral");
+		musb_g_disconnect(musb);
+		musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
+		musb->is_active = 0;
+		break;
+	case OTG_STATE_A_SUSPEND:
+	case OTG_STATE_A_WAIT_BCON:
+		musb_dbg(musb, "HNP: %s timeout",
+			usb_otg_state_string(musb->xceiv->otg->state));
+		musb_platform_set_vbus(musb, 0);
+		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
+		break;
+	default:
+		musb_dbg(musb, "HNP: Unhandled mode %s",
+			usb_otg_state_string(musb->xceiv->otg->state));
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+/*
+ * Stops the HNP transition. Caller must take care of locking.
+ */
+void musb_hnp_stop(struct musb *musb)
+{
+	struct usb_hcd	*hcd = musb->hcd;
+	void __iomem	*mbase = musb->mregs;
+	u8	reg;
+
+	musb_dbg(musb, "HNP: stop from %s",
+			usb_otg_state_string(musb->xceiv->otg->state));
+
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_A_PERIPHERAL:
+		musb_g_disconnect(musb);
+		musb_dbg(musb, "HNP: back to %s",
+			usb_otg_state_string(musb->xceiv->otg->state));
+		break;
+	case OTG_STATE_B_HOST:
+		musb_dbg(musb, "HNP: Disabling HR");
+		if (hcd)
+			hcd->self.is_b_host = 0;
+		musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
+		MUSB_DEV_MODE(musb);
+		reg = musb_readb(mbase, MUSB_POWER);
+		reg |= MUSB_POWER_SUSPENDM;
+		musb_writeb(mbase, MUSB_POWER, reg);
+		/* REVISIT: Start SESSION_REQUEST here? */
+		break;
+	default:
+		musb_dbg(musb, "HNP: Stopping in unknown state %s",
+			usb_otg_state_string(musb->xceiv->otg->state));
+	}
+
+	/*
+	 * When returning to A state after HNP, avoid hub_port_rebounce(),
+	 * which cause occasional OPT A "Did not receive reset after connect"
+	 * errors.
+	 */
+	musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
+}
+
+static void musb_recover_from_babble(struct musb *musb);
+
+static void musb_handle_intr_resume(struct musb *musb, u8 devctl)
+{
+	musb_dbg(musb, "RESUME (%s)",
+			usb_otg_state_string(musb->xceiv->otg->state));
+
+	if (devctl & MUSB_DEVCTL_HM) {
+		switch (musb->xceiv->otg->state) {
+		case OTG_STATE_A_SUSPEND:
+			/* remote wakeup? */
+			musb->port1_status |=
+					(USB_PORT_STAT_C_SUSPEND << 16)
+					| MUSB_PORT_STAT_RESUME;
+			musb->rh_timer = jiffies
+				+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
+			musb->xceiv->otg->state = OTG_STATE_A_HOST;
+			musb->is_active = 1;
+			musb_host_resume_root_hub(musb);
+			schedule_delayed_work(&musb->finish_resume_work,
+				msecs_to_jiffies(USB_RESUME_TIMEOUT));
+			break;
+		case OTG_STATE_B_WAIT_ACON:
+			musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
+			musb->is_active = 1;
+			MUSB_DEV_MODE(musb);
+			break;
+		default:
+			WARNING("bogus %s RESUME (%s)\n",
+				"host",
+				usb_otg_state_string(musb->xceiv->otg->state));
+		}
+	} else {
+		switch (musb->xceiv->otg->state) {
+		case OTG_STATE_A_SUSPEND:
+			/* possibly DISCONNECT is upcoming */
+			musb->xceiv->otg->state = OTG_STATE_A_HOST;
+			musb_host_resume_root_hub(musb);
+			break;
+		case OTG_STATE_B_WAIT_ACON:
+		case OTG_STATE_B_PERIPHERAL:
+			/* disconnect while suspended?  we may
+			 * not get a disconnect irq...
+			 */
+			if ((devctl & MUSB_DEVCTL_VBUS)
+					!= (3 << MUSB_DEVCTL_VBUS_SHIFT)
+					) {
+				musb->int_usb |= MUSB_INTR_DISCONNECT;
+				musb->int_usb &= ~MUSB_INTR_SUSPEND;
+				break;
+			}
+			musb_g_resume(musb);
+			break;
+		case OTG_STATE_B_IDLE:
+			musb->int_usb &= ~MUSB_INTR_SUSPEND;
+			break;
+		default:
+			WARNING("bogus %s RESUME (%s)\n",
+				"peripheral",
+				usb_otg_state_string(musb->xceiv->otg->state));
+		}
+	}
+}
+
+/* return IRQ_HANDLED to tell the caller to return immediately */
+static irqreturn_t musb_handle_intr_sessreq(struct musb *musb, u8 devctl)
+{
+	void __iomem *mbase = musb->mregs;
+
+	if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS
+			&& (devctl & MUSB_DEVCTL_BDEVICE)) {
+		musb_dbg(musb, "SessReq while on B state");
+		return IRQ_HANDLED;
+	}
+
+	musb_dbg(musb, "SESSION_REQUEST (%s)",
+		usb_otg_state_string(musb->xceiv->otg->state));
+
+	/* IRQ arrives from ID pin sense or (later, if VBUS power
+	 * is removed) SRP.  responses are time critical:
+	 *  - turn on VBUS (with silicon-specific mechanism)
+	 *  - go through A_WAIT_VRISE
+	 *  - ... to A_WAIT_BCON.
+	 * a_wait_vrise_tmout triggers VBUS_ERROR transitions
+	 */
+	musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+	musb->ep0_stage = MUSB_EP0_START;
+	musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+	MUSB_HST_MODE(musb);
+	musb_platform_set_vbus(musb, 1);
+
+	return IRQ_NONE;
+}
+
+static void musb_handle_intr_vbuserr(struct musb *musb, u8 devctl)
+{
+	int	ignore = 0;
+
+	/* During connection as an A-Device, we may see a short
+	 * current spikes causing voltage drop, because of cable
+	 * and peripheral capacitance combined with vbus draw.
+	 * (So: less common with truly self-powered devices, where
+	 * vbus doesn't act like a power supply.)
+	 *
+	 * Such spikes are short; usually less than ~500 usec, max
+	 * of ~2 msec.  That is, they're not sustained overcurrent
+	 * errors, though they're reported using VBUSERROR irqs.
+	 *
+	 * Workarounds:  (a) hardware: use self powered devices.
+	 * (b) software:  ignore non-repeated VBUS errors.
+	 *
+	 * REVISIT:  do delays from lots of DEBUG_KERNEL checks
+	 * make trouble here, keeping VBUS < 4.4V ?
+	 */
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_A_HOST:
+		/* recovery is dicey once we've gotten past the
+		 * initial stages of enumeration, but if VBUS
+		 * stayed ok at the other end of the link, and
+		 * another reset is due (at least for high speed,
+		 * to redo the chirp etc), it might work OK...
+		 */
+	case OTG_STATE_A_WAIT_BCON:
+	case OTG_STATE_A_WAIT_VRISE:
+		if (musb->vbuserr_retry) {
+			void __iomem *mbase = musb->mregs;
+
+			musb->vbuserr_retry--;
+			ignore = 1;
+			devctl |= MUSB_DEVCTL_SESSION;
+			musb_writeb(mbase, MUSB_DEVCTL, devctl);
+		} else {
+			musb->port1_status |=
+				  USB_PORT_STAT_OVERCURRENT
+				| (USB_PORT_STAT_C_OVERCURRENT << 16);
+		}
+		break;
+	default:
+		break;
+	}
+
+	dev_printk(ignore ? KERN_DEBUG : KERN_ERR, musb->controller,
+			"VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
+			usb_otg_state_string(musb->xceiv->otg->state),
+			devctl,
+			({ char *s;
+			switch (devctl & MUSB_DEVCTL_VBUS) {
+			case 0 << MUSB_DEVCTL_VBUS_SHIFT:
+				s = "<SessEnd"; break;
+			case 1 << MUSB_DEVCTL_VBUS_SHIFT:
+				s = "<AValid"; break;
+			case 2 << MUSB_DEVCTL_VBUS_SHIFT:
+				s = "<VBusValid"; break;
+			/* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */
+			default:
+				s = "VALID"; break;
+			} s; }),
+			VBUSERR_RETRY_COUNT - musb->vbuserr_retry,
+			musb->port1_status);
+
+	/* go through A_WAIT_VFALL then start a new session */
+	if (!ignore)
+		musb_platform_set_vbus(musb, 0);
+}
+
+static void musb_handle_intr_suspend(struct musb *musb, u8 devctl)
+{
+	musb_dbg(musb, "SUSPEND (%s) devctl %02x",
+		usb_otg_state_string(musb->xceiv->otg->state), devctl);
+
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_A_PERIPHERAL:
+		/* We also come here if the cable is removed, since
+		 * this silicon doesn't report ID-no-longer-grounded.
+		 *
+		 * We depend on T(a_wait_bcon) to shut us down, and
+		 * hope users don't do anything dicey during this
+		 * undesired detour through A_WAIT_BCON.
+		 */
+		musb_hnp_stop(musb);
+		musb_host_resume_root_hub(musb);
+		musb_root_disconnect(musb);
+		musb_platform_try_idle(musb, jiffies
+				+ msecs_to_jiffies(musb->a_wait_bcon
+					? : OTG_TIME_A_WAIT_BCON));
+
+		break;
+	case OTG_STATE_B_IDLE:
+		if (!musb->is_active)
+			break;
+		fallthrough;
+	case OTG_STATE_B_PERIPHERAL:
+		musb_g_suspend(musb);
+		musb->is_active = musb->g.b_hnp_enable;
+		if (musb->is_active) {
+			musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON;
+			musb_dbg(musb, "HNP: Setting timer for b_ase0_brst");
+			mod_timer(&musb->otg_timer, jiffies
+				+ msecs_to_jiffies(
+						OTG_TIME_B_ASE0_BRST));
+		}
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		if (musb->a_wait_bcon != 0)
+			musb_platform_try_idle(musb, jiffies
+				+ msecs_to_jiffies(musb->a_wait_bcon));
+		break;
+	case OTG_STATE_A_HOST:
+		musb->xceiv->otg->state = OTG_STATE_A_SUSPEND;
+		musb->is_active = musb->hcd->self.b_hnp_enable;
+		break;
+	case OTG_STATE_B_HOST:
+		/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
+		musb_dbg(musb, "REVISIT: SUSPEND as B_HOST");
+		break;
+	default:
+		/* "should not happen" */
+		musb->is_active = 0;
+		break;
+	}
+}
+
+static void musb_handle_intr_connect(struct musb *musb, u8 devctl, u8 int_usb)
+{
+	struct usb_hcd *hcd = musb->hcd;
+
+	musb->is_active = 1;
+	musb->ep0_stage = MUSB_EP0_START;
+
+	musb->intrtxe = musb->epmask;
+	musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe);
+	musb->intrrxe = musb->epmask & 0xfffe;
+	musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe);
+	musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7);
+	musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
+				|USB_PORT_STAT_HIGH_SPEED
+				|USB_PORT_STAT_ENABLE
+				);
+	musb->port1_status |= USB_PORT_STAT_CONNECTION
+				|(USB_PORT_STAT_C_CONNECTION << 16);
+
+	/* high vs full speed is just a guess until after reset */
+	if (devctl & MUSB_DEVCTL_LSDEV)
+		musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
+
+	/* indicate new connection to OTG machine */
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_B_PERIPHERAL:
+		if (int_usb & MUSB_INTR_SUSPEND) {
+			musb_dbg(musb, "HNP: SUSPEND+CONNECT, now b_host");
+			int_usb &= ~MUSB_INTR_SUSPEND;
+			goto b_host;
+		} else
+			musb_dbg(musb, "CONNECT as b_peripheral???");
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+		musb_dbg(musb, "HNP: CONNECT, now b_host");
+b_host:
+		musb->xceiv->otg->state = OTG_STATE_B_HOST;
+		if (musb->hcd)
+			musb->hcd->self.is_b_host = 1;
+		del_timer(&musb->otg_timer);
+		break;
+	default:
+		if ((devctl & MUSB_DEVCTL_VBUS)
+				== (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
+			musb->xceiv->otg->state = OTG_STATE_A_HOST;
+			if (hcd)
+				hcd->self.is_b_host = 0;
+		}
+		break;
+	}
+
+	musb_host_poke_root_hub(musb);
+
+	musb_dbg(musb, "CONNECT (%s) devctl %02x",
+			usb_otg_state_string(musb->xceiv->otg->state), devctl);
+}
+
+static void musb_handle_intr_disconnect(struct musb *musb, u8 devctl)
+{
+	musb_dbg(musb, "DISCONNECT (%s) as %s, devctl %02x",
+			usb_otg_state_string(musb->xceiv->otg->state),
+			MUSB_MODE(musb), devctl);
+
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_A_HOST:
+	case OTG_STATE_A_SUSPEND:
+		musb_host_resume_root_hub(musb);
+		musb_root_disconnect(musb);
+		if (musb->a_wait_bcon != 0)
+			musb_platform_try_idle(musb, jiffies
+				+ msecs_to_jiffies(musb->a_wait_bcon));
+		break;
+	case OTG_STATE_B_HOST:
+		/* REVISIT this behaves for "real disconnect"
+		 * cases; make sure the other transitions from
+		 * from B_HOST act right too.  The B_HOST code
+		 * in hnp_stop() is currently not used...
+		 */
+		musb_root_disconnect(musb);
+		if (musb->hcd)
+			musb->hcd->self.is_b_host = 0;
+		musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
+		MUSB_DEV_MODE(musb);
+		musb_g_disconnect(musb);
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		musb_hnp_stop(musb);
+		musb_root_disconnect(musb);
+		fallthrough;
+	case OTG_STATE_B_WAIT_ACON:
+	case OTG_STATE_B_PERIPHERAL:
+	case OTG_STATE_B_IDLE:
+		musb_g_disconnect(musb);
+		break;
+	default:
+		WARNING("unhandled DISCONNECT transition (%s)\n",
+			usb_otg_state_string(musb->xceiv->otg->state));
+		break;
+	}
+}
+
+/*
+ * mentor saves a bit: bus reset and babble share the same irq.
+ * only host sees babble; only peripheral sees bus reset.
+ */
+static void musb_handle_intr_reset(struct musb *musb)
+{
+	if (is_host_active(musb)) {
+		/*
+		 * When BABBLE happens what we can depends on which
+		 * platform MUSB is running, because some platforms
+		 * implemented proprietary means for 'recovering' from
+		 * Babble conditions. One such platform is AM335x. In
+		 * most cases, however, the only thing we can do is
+		 * drop the session.
+		 */
+		dev_err(musb->controller, "Babble\n");
+		musb_recover_from_babble(musb);
+	} else {
+		musb_dbg(musb, "BUS RESET as %s",
+			usb_otg_state_string(musb->xceiv->otg->state));
+		switch (musb->xceiv->otg->state) {
+		case OTG_STATE_A_SUSPEND:
+			musb_g_reset(musb);
+			fallthrough;
+		case OTG_STATE_A_WAIT_BCON:	/* OPT TD.4.7-900ms */
+			/* never use invalid T(a_wait_bcon) */
+			musb_dbg(musb, "HNP: in %s, %d msec timeout",
+				usb_otg_state_string(musb->xceiv->otg->state),
+				TA_WAIT_BCON(musb));
+			mod_timer(&musb->otg_timer, jiffies
+				+ msecs_to_jiffies(TA_WAIT_BCON(musb)));
+			break;
+		case OTG_STATE_A_PERIPHERAL:
+			del_timer(&musb->otg_timer);
+			musb_g_reset(musb);
+			break;
+		case OTG_STATE_B_WAIT_ACON:
+			musb_dbg(musb, "HNP: RESET (%s), to b_peripheral",
+				usb_otg_state_string(musb->xceiv->otg->state));
+			musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
+			musb_g_reset(musb);
+			break;
+		case OTG_STATE_B_IDLE:
+			musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
+			fallthrough;
+		case OTG_STATE_B_PERIPHERAL:
+			musb_g_reset(musb);
+			break;
+		default:
+			musb_dbg(musb, "Unhandled BUS RESET as %s",
+				usb_otg_state_string(musb->xceiv->otg->state));
+		}
+	}
+}
+
+/*
+ * Interrupt Service Routine to record USB "global" interrupts.
+ * Since these do not happen often and signify things of
+ * paramount importance, it seems OK to check them individually;
+ * the order of the tests is specified in the manual
+ *
+ * @param musb instance pointer
+ * @param int_usb register contents
+ * @param devctl
+ */
+
+static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
+				u8 devctl)
+{
+	irqreturn_t handled = IRQ_NONE;
+
+	musb_dbg(musb, "<== DevCtl=%02x, int_usb=0x%x", devctl, int_usb);
+
+	/* in host mode, the peripheral may issue remote wakeup.
+	 * in peripheral mode, the host may resume the link.
+	 * spurious RESUME irqs happen too, paired with SUSPEND.
+	 */
+	if (int_usb & MUSB_INTR_RESUME) {
+		musb_handle_intr_resume(musb, devctl);
+		handled = IRQ_HANDLED;
+	}
+
+	/* see manual for the order of the tests */
+	if (int_usb & MUSB_INTR_SESSREQ) {
+		if (musb_handle_intr_sessreq(musb, devctl))
+			return IRQ_HANDLED;
+		handled = IRQ_HANDLED;
+	}
+
+	if (int_usb & MUSB_INTR_VBUSERROR) {
+		musb_handle_intr_vbuserr(musb, devctl);
+		handled = IRQ_HANDLED;
+	}
+
+	if (int_usb & MUSB_INTR_SUSPEND) {
+		musb_handle_intr_suspend(musb, devctl);
+		handled = IRQ_HANDLED;
+	}
+
+	if (int_usb & MUSB_INTR_CONNECT) {
+		musb_handle_intr_connect(musb, devctl, int_usb);
+		handled = IRQ_HANDLED;
+	}
+
+	if (int_usb & MUSB_INTR_DISCONNECT) {
+		musb_handle_intr_disconnect(musb, devctl);
+		handled = IRQ_HANDLED;
+	}
+
+	if (int_usb & MUSB_INTR_RESET) {
+		musb_handle_intr_reset(musb);
+		handled = IRQ_HANDLED;
+	}
+
+#if 0
+/* REVISIT ... this would be for multiplexing periodic endpoints, or
+ * supporting transfer phasing to prevent exceeding ISO bandwidth
+ * limits of a given frame or microframe.
+ *
+ * It's not needed for peripheral side, which dedicates endpoints;
+ * though it _might_ use SOF irqs for other purposes.
+ *
+ * And it's not currently needed for host side, which also dedicates
+ * endpoints, relies on TX/RX interval registers, and isn't claimed
+ * to support ISO transfers yet.
+ */
+	if (int_usb & MUSB_INTR_SOF) {
+		void __iomem *mbase = musb->mregs;
+		struct musb_hw_ep	*ep;
+		u8 epnum;
+		u16 frame;
+
+		dev_dbg(musb->controller, "START_OF_FRAME\n");
+		handled = IRQ_HANDLED;
+
+		/* start any periodic Tx transfers waiting for current frame */
+		frame = musb_readw(mbase, MUSB_FRAME);
+		ep = musb->endpoints;
+		for (epnum = 1; (epnum < musb->nr_endpoints)
+					&& (musb->epmask >= (1 << epnum));
+				epnum++, ep++) {
+			/*
+			 * FIXME handle framecounter wraps (12 bits)
+			 * eliminate duplicated StartUrb logic
+			 */
+			if (ep->dwWaitFrame >= frame) {
+				ep->dwWaitFrame = 0;
+				pr_debug("SOF --> periodic TX%s on %d\n",
+					ep->tx_channel ? " DMA" : "",
+					epnum);
+				if (!ep->tx_channel)
+					musb_h_tx_start(musb, epnum);
+				else
+					cppi_hostdma_start(musb, epnum);
+			}
+		}		/* end of for loop */
+	}
+#endif
+
+	schedule_delayed_work(&musb->irq_work, 0);
+
+	return handled;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void musb_disable_interrupts(struct musb *musb)
+{
+	void __iomem	*mbase = musb->mregs;
+
+	/* disable interrupts */
+	musb_writeb(mbase, MUSB_INTRUSBE, 0);
+	musb->intrtxe = 0;
+	musb_writew(mbase, MUSB_INTRTXE, 0);
+	musb->intrrxe = 0;
+	musb_writew(mbase, MUSB_INTRRXE, 0);
+
+	/*  flush pending interrupts */
+	musb_clearb(mbase, MUSB_INTRUSB);
+	musb_clearw(mbase, MUSB_INTRTX);
+	musb_clearw(mbase, MUSB_INTRRX);
+}
+
+static void musb_enable_interrupts(struct musb *musb)
+{
+	void __iomem    *regs = musb->mregs;
+
+	/*  Set INT enable registers, enable interrupts */
+	musb->intrtxe = musb->epmask;
+	musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
+	musb->intrrxe = musb->epmask & 0xfffe;
+	musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
+	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
+
+}
+
+/*
+ * Program the HDRC to start (enable interrupts, dma, etc.).
+ */
+void musb_start(struct musb *musb)
+{
+	void __iomem    *regs = musb->mregs;
+	u8              devctl = musb_readb(regs, MUSB_DEVCTL);
+	u8		power;
+
+	musb_dbg(musb, "<== devctl %02x", devctl);
+
+	musb_enable_interrupts(musb);
+	musb_writeb(regs, MUSB_TESTMODE, 0);
+
+	power = MUSB_POWER_ISOUPDATE;
+	/*
+	 * treating UNKNOWN as unspecified maximum speed, in which case
+	 * we will default to high-speed.
+	 */
+	if (musb->config->maximum_speed == USB_SPEED_HIGH ||
+			musb->config->maximum_speed == USB_SPEED_UNKNOWN)
+		power |= MUSB_POWER_HSENAB;
+	musb_writeb(regs, MUSB_POWER, power);
+
+	musb->is_active = 0;
+	devctl = musb_readb(regs, MUSB_DEVCTL);
+	devctl &= ~MUSB_DEVCTL_SESSION;
+
+	/* session started after:
+	 * (a) ID-grounded irq, host mode;
+	 * (b) vbus present/connect IRQ, peripheral mode;
+	 * (c) peripheral initiates, using SRP
+	 */
+	if (musb->port_mode != MUSB_HOST &&
+			musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON &&
+			(devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
+		musb->is_active = 1;
+	} else {
+		devctl |= MUSB_DEVCTL_SESSION;
+	}
+
+	musb_platform_enable(musb);
+	musb_writeb(regs, MUSB_DEVCTL, devctl);
+}
+
+/*
+ * Make the HDRC stop (disable interrupts, etc.);
+ * reversible by musb_start
+ * called on gadget driver unregister
+ * with controller locked, irqs blocked
+ * acts as a NOP unless some role activated the hardware
+ */
+void musb_stop(struct musb *musb)
+{
+	/* stop IRQs, timers, ... */
+	musb_platform_disable(musb);
+	musb_disable_interrupts(musb);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+
+	/* FIXME
+	 *  - mark host and/or peripheral drivers unusable/inactive
+	 *  - disable DMA (and enable it in HdrcStart)
+	 *  - make sure we can musb_start() after musb_stop(); with
+	 *    OTG mode, gadget driver module rmmod/modprobe cycles that
+	 *  - ...
+	 */
+	musb_platform_try_idle(musb, 0);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * The silicon either has hard-wired endpoint configurations, or else
+ * "dynamic fifo" sizing.  The driver has support for both, though at this
+ * writing only the dynamic sizing is very well tested.   Since we switched
+ * away from compile-time hardware parameters, we can no longer rely on
+ * dead code elimination to leave only the relevant one in the object file.
+ *
+ * We don't currently use dynamic fifo setup capability to do anything
+ * more than selecting one of a bunch of predefined configurations.
+ */
+static ushort fifo_mode;
+
+/* "modprobe ... fifo_mode=1" etc */
+module_param(fifo_mode, ushort, 0);
+MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
+
+/*
+ * tables defining fifo_mode values.  define more if you like.
+ * for host side, make sure both halves of ep1 are set up.
+ */
+
+/* mode 0 - fits in 2KB */
+static struct musb_fifo_cfg mode_0_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 1 - fits in 4KB */
+static struct musb_fifo_cfg mode_1_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 2 - fits in 4KB */
+static struct musb_fifo_cfg mode_2_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 960, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 1024, },
+};
+
+/* mode 3 - fits in 4KB */
+static struct musb_fifo_cfg mode_3_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 4 - fits in 16KB */
+static struct musb_fifo_cfg mode_4_cfg[] = {
+{ .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 256, },
+{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 64, },
+{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 256, },
+{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 64, },
+{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 256, },
+{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 64, },
+{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 4096, },
+{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
+{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
+};
+
+/* mode 5 - fits in 8KB */
+static struct musb_fifo_cfg mode_5_cfg[] = {
+{ .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 512, },
+{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
+{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
+};
+
+/*
+ * configure a fifo; for non-shared endpoints, this may be called
+ * once for a tx fifo and once for an rx fifo.
+ *
+ * returns negative errno or offset for next fifo.
+ */
+static int
+fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
+		const struct musb_fifo_cfg *cfg, u16 offset)
+{
+	void __iomem	*mbase = musb->mregs;
+	int	size = 0;
+	u16	maxpacket = cfg->maxpacket;
+	u16	c_off = offset >> 3;
+	u8	c_size;
+
+	/* expect hw_ep has already been zero-initialized */
+
+	size = ffs(max(maxpacket, (u16) 8)) - 1;
+	maxpacket = 1 << size;
+
+	c_size = size - 3;
+	if (cfg->mode == BUF_DOUBLE) {
+		if ((offset + (maxpacket << 1)) >
+				(1 << (musb->config->ram_bits + 2)))
+			return -EMSGSIZE;
+		c_size |= MUSB_FIFOSZ_DPB;
+	} else {
+		if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2)))
+			return -EMSGSIZE;
+	}
+
+	/* configure the FIFO */
+	musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum);
+
+	/* EP0 reserved endpoint for control, bidirectional;
+	 * EP1 reserved for bulk, two unidirectional halves.
+	 */
+	if (hw_ep->epnum == 1)
+		musb->bulk_ep = hw_ep;
+	/* REVISIT error check:  be sure ep0 can both rx and tx ... */
+	switch (cfg->style) {
+	case FIFO_TX:
+		musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_TXFIFOADD, c_off);
+		hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_tx = maxpacket;
+		break;
+	case FIFO_RX:
+		musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_RXFIFOADD, c_off);
+		hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_rx = maxpacket;
+		break;
+	case FIFO_RXTX:
+		musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_TXFIFOADD, c_off);
+		hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_rx = maxpacket;
+
+		musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_RXFIFOADD, c_off);
+		hw_ep->tx_double_buffered = hw_ep->rx_double_buffered;
+		hw_ep->max_packet_sz_tx = maxpacket;
+
+		hw_ep->is_shared_fifo = true;
+		break;
+	}
+
+	/* NOTE rx and tx endpoint irqs aren't managed separately,
+	 * which happens to be ok
+	 */
+	musb->epmask |= (1 << hw_ep->epnum);
+
+	return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
+}
+
+static struct musb_fifo_cfg ep0_cfg = {
+	.style = FIFO_RXTX, .maxpacket = 64,
+};
+
+static int ep_config_from_table(struct musb *musb)
+{
+	const struct musb_fifo_cfg	*cfg;
+	unsigned		i, n;
+	int			offset;
+	struct musb_hw_ep	*hw_ep = musb->endpoints;
+
+	if (musb->config->fifo_cfg) {
+		cfg = musb->config->fifo_cfg;
+		n = musb->config->fifo_cfg_size;
+		goto done;
+	}
+
+	switch (fifo_mode) {
+	default:
+		fifo_mode = 0;
+		fallthrough;
+	case 0:
+		cfg = mode_0_cfg;
+		n = ARRAY_SIZE(mode_0_cfg);
+		break;
+	case 1:
+		cfg = mode_1_cfg;
+		n = ARRAY_SIZE(mode_1_cfg);
+		break;
+	case 2:
+		cfg = mode_2_cfg;
+		n = ARRAY_SIZE(mode_2_cfg);
+		break;
+	case 3:
+		cfg = mode_3_cfg;
+		n = ARRAY_SIZE(mode_3_cfg);
+		break;
+	case 4:
+		cfg = mode_4_cfg;
+		n = ARRAY_SIZE(mode_4_cfg);
+		break;
+	case 5:
+		cfg = mode_5_cfg;
+		n = ARRAY_SIZE(mode_5_cfg);
+		break;
+	}
+
+	pr_debug("%s: setup fifo_mode %d\n", musb_driver_name, fifo_mode);
+
+
+done:
+	offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0);
+	/* assert(offset > 0) */
+
+	/* NOTE:  for RTL versions >= 1.400 EPINFO and RAMINFO would
+	 * be better than static musb->config->num_eps and DYN_FIFO_SIZE...
+	 */
+
+	for (i = 0; i < n; i++) {
+		u8	epn = cfg->hw_ep_num;
+
+		if (epn >= musb->config->num_eps) {
+			pr_debug("%s: invalid ep %d\n",
+					musb_driver_name, epn);
+			return -EINVAL;
+		}
+		offset = fifo_setup(musb, hw_ep + epn, cfg++, offset);
+		if (offset < 0) {
+			pr_debug("%s: mem overrun, ep %d\n",
+					musb_driver_name, epn);
+			return offset;
+		}
+		epn++;
+		musb->nr_endpoints = max(epn, musb->nr_endpoints);
+	}
+
+	pr_debug("%s: %d/%d max ep, %d/%d memory\n",
+			musb_driver_name,
+			n + 1, musb->config->num_eps * 2 - 1,
+			offset, (1 << (musb->config->ram_bits + 2)));
+
+	if (!musb->bulk_ep) {
+		pr_debug("%s: missing bulk\n", musb_driver_name);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+/*
+ * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
+ * @param musb the controller
+ */
+static int ep_config_from_hw(struct musb *musb)
+{
+	u8 epnum = 0;
+	struct musb_hw_ep *hw_ep;
+	void __iomem *mbase = musb->mregs;
+	int ret = 0;
+
+	musb_dbg(musb, "<== static silicon ep config");
+
+	/* FIXME pick up ep0 maxpacket size */
+
+	for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
+		musb_ep_select(mbase, epnum);
+		hw_ep = musb->endpoints + epnum;
+
+		ret = musb_read_fifosize(musb, hw_ep, epnum);
+		if (ret < 0)
+			break;
+
+		/* FIXME set up hw_ep->{rx,tx}_double_buffered */
+
+		/* pick an RX/TX endpoint for bulk */
+		if (hw_ep->max_packet_sz_tx < 512
+				|| hw_ep->max_packet_sz_rx < 512)
+			continue;
+
+		/* REVISIT:  this algorithm is lazy, we should at least
+		 * try to pick a double buffered endpoint.
+		 */
+		if (musb->bulk_ep)
+			continue;
+		musb->bulk_ep = hw_ep;
+	}
+
+	if (!musb->bulk_ep) {
+		pr_debug("%s: missing bulk\n", musb_driver_name);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
+
+/* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
+ * configure endpoints, or take their config from silicon
+ */
+static int musb_core_init(u16 musb_type, struct musb *musb)
+{
+	u8 reg;
+	char *type;
+	char aInfo[90];
+	void __iomem	*mbase = musb->mregs;
+	int		status = 0;
+	int		i;
+
+	/* log core options (read using indexed model) */
+	reg = musb_read_configdata(mbase);
+
+	strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
+	if (reg & MUSB_CONFIGDATA_DYNFIFO) {
+		strcat(aInfo, ", dyn FIFOs");
+		musb->dyn_fifo = true;
+	}
+	if (reg & MUSB_CONFIGDATA_MPRXE) {
+		strcat(aInfo, ", bulk combine");
+		musb->bulk_combine = true;
+	}
+	if (reg & MUSB_CONFIGDATA_MPTXE) {
+		strcat(aInfo, ", bulk split");
+		musb->bulk_split = true;
+	}
+	if (reg & MUSB_CONFIGDATA_HBRXE) {
+		strcat(aInfo, ", HB-ISO Rx");
+		musb->hb_iso_rx = true;
+	}
+	if (reg & MUSB_CONFIGDATA_HBTXE) {
+		strcat(aInfo, ", HB-ISO Tx");
+		musb->hb_iso_tx = true;
+	}
+	if (reg & MUSB_CONFIGDATA_SOFTCONE)
+		strcat(aInfo, ", SoftConn");
+
+	pr_debug("%s: ConfigData=0x%02x (%s)\n", musb_driver_name, reg, aInfo);
+
+	if (MUSB_CONTROLLER_MHDRC == musb_type) {
+		musb->is_multipoint = 1;
+		type = "M";
+	} else {
+		musb->is_multipoint = 0;
+		type = "";
+		if (IS_ENABLED(CONFIG_USB) &&
+		    !IS_ENABLED(CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB)) {
+			pr_err("%s: kernel must disable external hubs, please fix the configuration\n",
+			       musb_driver_name);
+		}
+	}
+
+	/* log release info */
+	musb->hwvers = musb_readw(mbase, MUSB_HWVERS);
+	pr_debug("%s: %sHDRC RTL version %d.%d%s\n",
+		 musb_driver_name, type, MUSB_HWVERS_MAJOR(musb->hwvers),
+		 MUSB_HWVERS_MINOR(musb->hwvers),
+		 (musb->hwvers & MUSB_HWVERS_RC) ? "RC" : "");
+
+	/* configure ep0 */
+	musb_configure_ep0(musb);
+
+	/* discover endpoint configuration */
+	musb->nr_endpoints = 1;
+	musb->epmask = 1;
+
+	if (musb->dyn_fifo)
+		status = ep_config_from_table(musb);
+	else
+		status = ep_config_from_hw(musb);
+
+	if (status < 0)
+		return status;
+
+	/* finish init, and print endpoint config */
+	for (i = 0; i < musb->nr_endpoints; i++) {
+		struct musb_hw_ep	*hw_ep = musb->endpoints + i;
+
+		hw_ep->fifo = musb->io.fifo_offset(i) + mbase;
+#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
+		if (musb->ops->quirks & MUSB_IN_TUSB) {
+			hw_ep->fifo_async = musb->async + 0x400 +
+				musb->io.fifo_offset(i);
+			hw_ep->fifo_sync = musb->sync + 0x400 +
+				musb->io.fifo_offset(i);
+			hw_ep->fifo_sync_va =
+				musb->sync_va + 0x400 + musb->io.fifo_offset(i);
+
+			if (i == 0)
+				hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF;
+			else
+				hw_ep->conf = mbase + 0x400 +
+					(((i - 1) & 0xf) << 2);
+		}
+#endif
+
+		hw_ep->regs = musb->io.ep_offset(i, 0) + mbase;
+		hw_ep->rx_reinit = 1;
+		hw_ep->tx_reinit = 1;
+
+		if (hw_ep->max_packet_sz_tx) {
+			musb_dbg(musb, "%s: hw_ep %d%s, %smax %d",
+				musb_driver_name, i,
+				hw_ep->is_shared_fifo ? "shared" : "tx",
+				hw_ep->tx_double_buffered
+					? "doublebuffer, " : "",
+				hw_ep->max_packet_sz_tx);
+		}
+		if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) {
+			musb_dbg(musb, "%s: hw_ep %d%s, %smax %d",
+				musb_driver_name, i,
+				"rx",
+				hw_ep->rx_double_buffered
+					? "doublebuffer, " : "",
+				hw_ep->max_packet_sz_rx);
+		}
+		if (!(hw_ep->max_packet_sz_tx || hw_ep->max_packet_sz_rx))
+			musb_dbg(musb, "hw_ep %d not configured", i);
+	}
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * handle all the irqs defined by the HDRC core. for now we expect:  other
+ * irq sources (phy, dma, etc) will be handled first, musb->int_* values
+ * will be assigned, and the irq will already have been acked.
+ *
+ * called in irq context with spinlock held, irqs blocked
+ */
+irqreturn_t musb_interrupt(struct musb *musb)
+{
+	irqreturn_t	retval = IRQ_NONE;
+	unsigned long	status;
+	unsigned long	epnum;
+	u8		devctl;
+
+	if (!musb->int_usb && !musb->int_tx && !musb->int_rx)
+		return IRQ_NONE;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	trace_musb_isr(musb);
+
+	/**
+	 * According to Mentor Graphics' documentation, flowchart on page 98,
+	 * IRQ should be handled as follows:
+	 *
+	 * . Resume IRQ
+	 * . Session Request IRQ
+	 * . VBUS Error IRQ
+	 * . Suspend IRQ
+	 * . Connect IRQ
+	 * . Disconnect IRQ
+	 * . Reset/Babble IRQ
+	 * . SOF IRQ (we're not using this one)
+	 * . Endpoint 0 IRQ
+	 * . TX Endpoints
+	 * . RX Endpoints
+	 *
+	 * We will be following that flowchart in order to avoid any problems
+	 * that might arise with internal Finite State Machine.
+	 */
+
+	if (musb->int_usb)
+		retval |= musb_stage0_irq(musb, musb->int_usb, devctl);
+
+	if (musb->int_tx & 1) {
+		if (is_host_active(musb))
+			retval |= musb_h_ep0_irq(musb);
+		else
+			retval |= musb_g_ep0_irq(musb);
+
+		/* we have just handled endpoint 0 IRQ, clear it */
+		musb->int_tx &= ~BIT(0);
+	}
+
+	status = musb->int_tx;
+
+	for_each_set_bit(epnum, &status, 16) {
+		retval = IRQ_HANDLED;
+		if (is_host_active(musb))
+			musb_host_tx(musb, epnum);
+		else
+			musb_g_tx(musb, epnum);
+	}
+
+	status = musb->int_rx;
+
+	for_each_set_bit(epnum, &status, 16) {
+		retval = IRQ_HANDLED;
+		if (is_host_active(musb))
+			musb_host_rx(musb, epnum);
+		else
+			musb_g_rx(musb, epnum);
+	}
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(musb_interrupt);
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+static bool use_dma = true;
+
+/* "modprobe ... use_dma=0" etc */
+module_param(use_dma, bool, 0644);
+MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
+
+void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
+{
+	/* called with controller lock already held */
+
+	if (!epnum) {
+		if (!is_cppi_enabled(musb)) {
+			/* endpoint 0 */
+			if (is_host_active(musb))
+				musb_h_ep0_irq(musb);
+			else
+				musb_g_ep0_irq(musb);
+		}
+	} else {
+		/* endpoints 1..15 */
+		if (transmit) {
+			if (is_host_active(musb))
+				musb_host_tx(musb, epnum);
+			else
+				musb_g_tx(musb, epnum);
+		} else {
+			/* receive */
+			if (is_host_active(musb))
+				musb_host_rx(musb, epnum);
+			else
+				musb_g_rx(musb, epnum);
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(musb_dma_completion);
+
+#else
+#define use_dma			0
+#endif
+
+static int (*musb_phy_callback)(enum musb_vbus_id_status status);
+
+/*
+ * musb_mailbox - optional phy notifier function
+ * @status phy state change
+ *
+ * Optionally gets called from the USB PHY. Note that the USB PHY must be
+ * disabled at the point the phy_callback is registered or unregistered.
+ */
+int musb_mailbox(enum musb_vbus_id_status status)
+{
+	if (musb_phy_callback)
+		return musb_phy_callback(status);
+
+	return -ENODEV;
+};
+EXPORT_SYMBOL_GPL(musb_mailbox);
+
+/*-------------------------------------------------------------------------*/
+
+static ssize_t
+mode_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct musb *musb = dev_to_musb(dev);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = sprintf(buf, "%s\n", usb_otg_state_string(musb->xceiv->otg->state));
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return ret;
+}
+
+static ssize_t
+mode_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+	int		status;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	if (sysfs_streq(buf, "host"))
+		status = musb_platform_set_mode(musb, MUSB_HOST);
+	else if (sysfs_streq(buf, "peripheral"))
+		status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
+	else if (sysfs_streq(buf, "otg"))
+		status = musb_platform_set_mode(musb, MUSB_OTG);
+	else
+		status = -EINVAL;
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return (status == 0) ? n : status;
+}
+static DEVICE_ATTR_RW(mode);
+
+static ssize_t
+vbus_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+	unsigned long	val;
+
+	if (sscanf(buf, "%lu", &val) < 1) {
+		dev_err(dev, "Invalid VBUS timeout ms value\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&musb->lock, flags);
+	/* force T(a_wait_bcon) to be zero/unlimited *OR* valid */
+	musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ;
+	if (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)
+		musb->is_active = 0;
+	musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return n;
+}
+
+static ssize_t
+vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+	unsigned long	val;
+	int		vbus;
+	u8		devctl;
+
+	pm_runtime_get_sync(dev);
+	spin_lock_irqsave(&musb->lock, flags);
+	val = musb->a_wait_bcon;
+	vbus = musb_platform_get_vbus_status(musb);
+	if (vbus < 0) {
+		/* Use default MUSB method by means of DEVCTL register */
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if ((devctl & MUSB_DEVCTL_VBUS)
+				== (3 << MUSB_DEVCTL_VBUS_SHIFT))
+			vbus = 1;
+		else
+			vbus = 0;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+	pm_runtime_put_sync(dev);
+
+	return sprintf(buf, "Vbus %s, timeout %lu msec\n",
+			vbus ? "on" : "off", val);
+}
+static DEVICE_ATTR_RW(vbus);
+
+/* Gadget drivers can't know that a host is connected so they might want
+ * to start SRP, but users can.  This allows userspace to trigger SRP.
+ */
+static ssize_t srp_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned short	srp;
+
+	if (sscanf(buf, "%hu", &srp) != 1
+			|| (srp != 1)) {
+		dev_err(dev, "SRP: Value must be 1\n");
+		return -EINVAL;
+	}
+
+	if (srp == 1)
+		musb_g_wakeup(musb);
+
+	return n;
+}
+static DEVICE_ATTR_WO(srp);
+
+static struct attribute *musb_attrs[] = {
+	&dev_attr_mode.attr,
+	&dev_attr_vbus.attr,
+	&dev_attr_srp.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(musb);
+
+#define MUSB_QUIRK_B_INVALID_VBUS_91	(MUSB_DEVCTL_BDEVICE | \
+					 (2 << MUSB_DEVCTL_VBUS_SHIFT) | \
+					 MUSB_DEVCTL_SESSION)
+#define MUSB_QUIRK_B_DISCONNECT_99	(MUSB_DEVCTL_BDEVICE | \
+					 (3 << MUSB_DEVCTL_VBUS_SHIFT) | \
+					 MUSB_DEVCTL_SESSION)
+#define MUSB_QUIRK_A_DISCONNECT_19	((3 << MUSB_DEVCTL_VBUS_SHIFT) | \
+					 MUSB_DEVCTL_SESSION)
+
+static bool musb_state_needs_recheck(struct musb *musb, u8 devctl,
+				     const char *desc)
+{
+	if (musb->quirk_retries && !musb->flush_irq_work) {
+		trace_musb_state(musb, devctl, desc);
+		schedule_delayed_work(&musb->irq_work,
+				      msecs_to_jiffies(1000));
+		musb->quirk_retries--;
+
+		return true;
+	}
+
+	return false;
+}
+
+/*
+ * Check the musb devctl session bit to determine if we want to
+ * allow PM runtime for the device. In general, we want to keep things
+ * active when the session bit is set except after host disconnect.
+ *
+ * Only called from musb_irq_work. If this ever needs to get called
+ * elsewhere, proper locking must be implemented for musb->session.
+ */
+static void musb_pm_runtime_check_session(struct musb *musb)
+{
+	u8 devctl, s;
+	int error;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	/* Handle session status quirks first */
+	s = MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV |
+		MUSB_DEVCTL_HR;
+	switch (devctl & ~s) {
+	case MUSB_QUIRK_B_DISCONNECT_99:
+		musb_state_needs_recheck(musb, devctl,
+			"Poll devctl in case of suspend after disconnect");
+		break;
+	case MUSB_QUIRK_B_INVALID_VBUS_91:
+		if (musb_state_needs_recheck(musb, devctl,
+				"Poll devctl on invalid vbus, assume no session"))
+			return;
+		fallthrough;
+	case MUSB_QUIRK_A_DISCONNECT_19:
+		if (musb_state_needs_recheck(musb, devctl,
+				"Poll devctl on possible host mode disconnect"))
+			return;
+		if (!musb->session)
+			break;
+		trace_musb_state(musb, devctl, "Allow PM on possible host mode disconnect");
+		pm_runtime_mark_last_busy(musb->controller);
+		pm_runtime_put_autosuspend(musb->controller);
+		musb->session = false;
+		return;
+	default:
+		break;
+	}
+
+	/* No need to do anything if session has not changed */
+	s = devctl & MUSB_DEVCTL_SESSION;
+	if (s == musb->session)
+		return;
+
+	/* Block PM or allow PM? */
+	if (s) {
+		trace_musb_state(musb, devctl, "Block PM on active session");
+		error = pm_runtime_get_sync(musb->controller);
+		if (error < 0)
+			dev_err(musb->controller, "Could not enable: %i\n",
+				error);
+		musb->quirk_retries = 3;
+
+		/*
+		 * We can get a spurious MUSB_INTR_SESSREQ interrupt on start-up
+		 * in B-peripheral mode with nothing connected and the session
+		 * bit clears silently. Check status again in 3 seconds.
+		 */
+		if (devctl & MUSB_DEVCTL_BDEVICE)
+			schedule_delayed_work(&musb->irq_work,
+					      msecs_to_jiffies(3000));
+	} else {
+		trace_musb_state(musb, devctl, "Allow PM with no session");
+		pm_runtime_mark_last_busy(musb->controller);
+		pm_runtime_put_autosuspend(musb->controller);
+	}
+
+	musb->session = s;
+}
+
+/* Only used to provide driver mode change events */
+static void musb_irq_work(struct work_struct *data)
+{
+	struct musb *musb = container_of(data, struct musb, irq_work.work);
+	int error;
+
+	error = pm_runtime_resume_and_get(musb->controller);
+	if (error < 0) {
+		dev_err(musb->controller, "Could not enable: %i\n", error);
+
+		return;
+	}
+
+	musb_pm_runtime_check_session(musb);
+
+	if (musb->xceiv->otg->state != musb->xceiv_old_state) {
+		musb->xceiv_old_state = musb->xceiv->otg->state;
+		sysfs_notify(&musb->controller->kobj, NULL, "mode");
+	}
+
+	pm_runtime_mark_last_busy(musb->controller);
+	pm_runtime_put_autosuspend(musb->controller);
+}
+
+static void musb_recover_from_babble(struct musb *musb)
+{
+	int ret;
+	u8 devctl;
+
+	musb_disable_interrupts(musb);
+
+	/*
+	 * wait at least 320 cycles of 60MHz clock. That's 5.3us, we will give
+	 * it some slack and wait for 10us.
+	 */
+	udelay(10);
+
+	ret  = musb_platform_recover(musb);
+	if (ret) {
+		musb_enable_interrupts(musb);
+		return;
+	}
+
+	/* drop session bit */
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+	devctl &= ~MUSB_DEVCTL_SESSION;
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	/* tell usbcore about it */
+	musb_root_disconnect(musb);
+
+	/*
+	 * When a babble condition occurs, the musb controller
+	 * removes the session bit and the endpoint config is lost.
+	 */
+	if (musb->dyn_fifo)
+		ret = ep_config_from_table(musb);
+	else
+		ret = ep_config_from_hw(musb);
+
+	/* restart session */
+	if (ret == 0)
+		musb_start(musb);
+}
+
+/* --------------------------------------------------------------------------
+ * Init support
+ */
+
+static struct musb *allocate_instance(struct device *dev,
+		const struct musb_hdrc_config *config, void __iomem *mbase)
+{
+	struct musb		*musb;
+	struct musb_hw_ep	*ep;
+	int			epnum;
+	int			ret;
+
+	musb = devm_kzalloc(dev, sizeof(*musb), GFP_KERNEL);
+	if (!musb)
+		return NULL;
+
+	INIT_LIST_HEAD(&musb->control);
+	INIT_LIST_HEAD(&musb->in_bulk);
+	INIT_LIST_HEAD(&musb->out_bulk);
+	INIT_LIST_HEAD(&musb->pending_list);
+
+	musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+	musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
+	musb->mregs = mbase;
+	musb->ctrl_base = mbase;
+	musb->nIrq = -ENODEV;
+	musb->config = config;
+	BUG_ON(musb->config->num_eps > MUSB_C_NUM_EPS);
+	for (epnum = 0, ep = musb->endpoints;
+			epnum < musb->config->num_eps;
+			epnum++, ep++) {
+		ep->musb = musb;
+		ep->epnum = epnum;
+	}
+
+	musb->controller = dev;
+
+	ret = musb_host_alloc(musb);
+	if (ret < 0)
+		goto err_free;
+
+	dev_set_drvdata(dev, musb);
+
+	return musb;
+
+err_free:
+	return NULL;
+}
+
+static void musb_free(struct musb *musb)
+{
+	/* this has multiple entry modes. it handles fault cleanup after
+	 * probe(), where things may be partially set up, as well as rmmod
+	 * cleanup after everything's been de-activated.
+	 */
+
+	if (musb->nIrq >= 0) {
+		if (musb->irq_wake)
+			disable_irq_wake(musb->nIrq);
+		free_irq(musb->nIrq, musb);
+	}
+
+	musb_host_free(musb);
+}
+
+struct musb_pending_work {
+	int (*callback)(struct musb *musb, void *data);
+	void *data;
+	struct list_head node;
+};
+
+#ifdef CONFIG_PM
+/*
+ * Called from musb_runtime_resume(), musb_resume(), and
+ * musb_queue_resume_work(). Callers must take musb->lock.
+ */
+static int musb_run_resume_work(struct musb *musb)
+{
+	struct musb_pending_work *w, *_w;
+	unsigned long flags;
+	int error = 0;
+
+	spin_lock_irqsave(&musb->list_lock, flags);
+	list_for_each_entry_safe(w, _w, &musb->pending_list, node) {
+		if (w->callback) {
+			error = w->callback(musb, w->data);
+			if (error < 0) {
+				dev_err(musb->controller,
+					"resume callback %p failed: %i\n",
+					w->callback, error);
+			}
+		}
+		list_del(&w->node);
+		devm_kfree(musb->controller, w);
+	}
+	spin_unlock_irqrestore(&musb->list_lock, flags);
+
+	return error;
+}
+#endif
+
+/*
+ * Called to run work if device is active or else queue the work to happen
+ * on resume. Caller must take musb->lock and must hold an RPM reference.
+ *
+ * Note that we cowardly refuse queuing work after musb PM runtime
+ * resume is done calling musb_run_resume_work() and return -EINPROGRESS
+ * instead.
+ */
+int musb_queue_resume_work(struct musb *musb,
+			   int (*callback)(struct musb *musb, void *data),
+			   void *data)
+{
+	struct musb_pending_work *w;
+	unsigned long flags;
+	bool is_suspended;
+	int error;
+
+	if (WARN_ON(!callback))
+		return -EINVAL;
+
+	spin_lock_irqsave(&musb->list_lock, flags);
+	is_suspended = musb->is_runtime_suspended;
+
+	if (is_suspended) {
+		w = devm_kzalloc(musb->controller, sizeof(*w), GFP_ATOMIC);
+		if (!w) {
+			error = -ENOMEM;
+			goto out_unlock;
+		}
+
+		w->callback = callback;
+		w->data = data;
+
+		list_add_tail(&w->node, &musb->pending_list);
+		error = 0;
+	}
+
+out_unlock:
+	spin_unlock_irqrestore(&musb->list_lock, flags);
+
+	if (!is_suspended)
+		error = callback(musb, data);
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(musb_queue_resume_work);
+
+static void musb_deassert_reset(struct work_struct *work)
+{
+	struct musb *musb;
+	unsigned long flags;
+
+	musb = container_of(work, struct musb, deassert_reset_work.work);
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb->port1_status & USB_PORT_STAT_RESET)
+		musb_port_reset(musb, false);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+/*
+ * Perform generic per-controller initialization.
+ *
+ * @dev: the controller (already clocked, etc)
+ * @nIrq: IRQ number
+ * @ctrl: virtual address of controller registers,
+ *	not yet corrected for platform-specific offsets
+ */
+static int
+musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
+{
+	int			status;
+	struct musb		*musb;
+	struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
+
+	/* The driver might handle more features than the board; OK.
+	 * Fail when the board needs a feature that's not enabled.
+	 */
+	if (!plat) {
+		dev_err(dev, "no platform_data?\n");
+		status = -ENODEV;
+		goto fail0;
+	}
+
+	/* allocate */
+	musb = allocate_instance(dev, plat->config, ctrl);
+	if (!musb) {
+		status = -ENOMEM;
+		goto fail0;
+	}
+
+	spin_lock_init(&musb->lock);
+	spin_lock_init(&musb->list_lock);
+	musb->board_set_power = plat->set_power;
+	musb->min_power = plat->min_power;
+	musb->ops = plat->platform_ops;
+	musb->port_mode = plat->mode;
+
+	/*
+	 * Initialize the default IO functions. At least omap2430 needs
+	 * these early. We initialize the platform specific IO functions
+	 * later on.
+	 */
+	musb_readb = musb_default_readb;
+	musb_writeb = musb_default_writeb;
+	musb_readw = musb_default_readw;
+	musb_writew = musb_default_writew;
+
+	/* The musb_platform_init() call:
+	 *   - adjusts musb->mregs
+	 *   - sets the musb->isr
+	 *   - may initialize an integrated transceiver
+	 *   - initializes musb->xceiv, usually by otg_get_phy()
+	 *   - stops powering VBUS
+	 *
+	 * There are various transceiver configurations.
+	 * DaVinci, TUSB60x0, and others integrate them.  OMAP3 uses
+	 * external/discrete ones in various flavors (twl4030 family,
+	 * isp1504, non-OTG, etc) mostly hooking up through ULPI.
+	 */
+	status = musb_platform_init(musb);
+	if (status < 0)
+		goto fail1;
+
+	if (!musb->isr) {
+		status = -ENODEV;
+		goto fail2;
+	}
+
+
+	/* Most devices use indexed offset or flat offset */
+	if (musb->ops->quirks & MUSB_INDEXED_EP) {
+		musb->io.ep_offset = musb_indexed_ep_offset;
+		musb->io.ep_select = musb_indexed_ep_select;
+	} else {
+		musb->io.ep_offset = musb_flat_ep_offset;
+		musb->io.ep_select = musb_flat_ep_select;
+	}
+
+	if (musb->ops->quirks & MUSB_G_NO_SKB_RESERVE)
+		musb->g.quirk_avoids_skb_reserve = 1;
+
+	/* At least tusb6010 has its own offsets */
+	if (musb->ops->ep_offset)
+		musb->io.ep_offset = musb->ops->ep_offset;
+	if (musb->ops->ep_select)
+		musb->io.ep_select = musb->ops->ep_select;
+
+	if (musb->ops->fifo_mode)
+		fifo_mode = musb->ops->fifo_mode;
+	else
+		fifo_mode = 4;
+
+	if (musb->ops->fifo_offset)
+		musb->io.fifo_offset = musb->ops->fifo_offset;
+	else
+		musb->io.fifo_offset = musb_default_fifo_offset;
+
+	if (musb->ops->busctl_offset)
+		musb->io.busctl_offset = musb->ops->busctl_offset;
+	else
+		musb->io.busctl_offset = musb_default_busctl_offset;
+
+	if (musb->ops->readb)
+		musb_readb = musb->ops->readb;
+	if (musb->ops->writeb)
+		musb_writeb = musb->ops->writeb;
+	if (musb->ops->clearb)
+		musb_clearb = musb->ops->clearb;
+	else
+		musb_clearb = musb_readb;
+
+	if (musb->ops->readw)
+		musb_readw = musb->ops->readw;
+	if (musb->ops->writew)
+		musb_writew = musb->ops->writew;
+	if (musb->ops->clearw)
+		musb_clearw = musb->ops->clearw;
+	else
+		musb_clearw = musb_readw;
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+	if (!musb->ops->dma_init || !musb->ops->dma_exit) {
+		dev_err(dev, "DMA controller not set\n");
+		status = -ENODEV;
+		goto fail2;
+	}
+	musb_dma_controller_create = musb->ops->dma_init;
+	musb_dma_controller_destroy = musb->ops->dma_exit;
+#endif
+
+	if (musb->ops->read_fifo)
+		musb->io.read_fifo = musb->ops->read_fifo;
+	else
+		musb->io.read_fifo = musb_default_read_fifo;
+
+	if (musb->ops->write_fifo)
+		musb->io.write_fifo = musb->ops->write_fifo;
+	else
+		musb->io.write_fifo = musb_default_write_fifo;
+
+	if (musb->ops->get_toggle)
+		musb->io.get_toggle = musb->ops->get_toggle;
+	else
+		musb->io.get_toggle = musb_default_get_toggle;
+
+	if (musb->ops->set_toggle)
+		musb->io.set_toggle = musb->ops->set_toggle;
+	else
+		musb->io.set_toggle = musb_default_set_toggle;
+
+	if (!musb->xceiv->io_ops) {
+		musb->xceiv->io_dev = musb->controller;
+		musb->xceiv->io_priv = musb->mregs;
+		musb->xceiv->io_ops = &musb_ulpi_access;
+	}
+
+	if (musb->ops->phy_callback)
+		musb_phy_callback = musb->ops->phy_callback;
+
+	/*
+	 * We need musb_read/write functions initialized for PM.
+	 * Note that at least 2430 glue needs autosuspend delay
+	 * somewhere above 300 ms for the hardware to idle properly
+	 * after disconnecting the cable in host mode. Let's use
+	 * 500 ms for some margin.
+	 */
+	pm_runtime_use_autosuspend(musb->controller);
+	pm_runtime_set_autosuspend_delay(musb->controller, 500);
+	pm_runtime_enable(musb->controller);
+	pm_runtime_get_sync(musb->controller);
+
+	status = usb_phy_init(musb->xceiv);
+	if (status < 0)
+		goto err_usb_phy_init;
+
+	if (use_dma && dev->dma_mask) {
+		musb->dma_controller =
+			musb_dma_controller_create(musb, musb->mregs);
+		if (IS_ERR(musb->dma_controller)) {
+			status = PTR_ERR(musb->dma_controller);
+			goto fail2_5;
+		}
+	}
+
+	/* be sure interrupts are disabled before connecting ISR */
+	musb_platform_disable(musb);
+	musb_disable_interrupts(musb);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+
+	/* MUSB_POWER_SOFTCONN might be already set, JZ4740 does this. */
+	musb_writeb(musb->mregs, MUSB_POWER, 0);
+
+	/* Init IRQ workqueue before request_irq */
+	INIT_DELAYED_WORK(&musb->irq_work, musb_irq_work);
+	INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset);
+	INIT_DELAYED_WORK(&musb->finish_resume_work, musb_host_finish_resume);
+
+	/* setup musb parts of the core (especially endpoints) */
+	status = musb_core_init(plat->config->multipoint
+			? MUSB_CONTROLLER_MHDRC
+			: MUSB_CONTROLLER_HDRC, musb);
+	if (status < 0)
+		goto fail3;
+
+	timer_setup(&musb->otg_timer, musb_otg_timer_func, 0);
+
+	/* attach to the IRQ */
+	if (request_irq(nIrq, musb->isr, IRQF_SHARED, dev_name(dev), musb)) {
+		dev_err(dev, "request_irq %d failed!\n", nIrq);
+		status = -ENODEV;
+		goto fail3;
+	}
+	musb->nIrq = nIrq;
+	/* FIXME this handles wakeup irqs wrong */
+	if (enable_irq_wake(nIrq) == 0) {
+		musb->irq_wake = 1;
+		device_init_wakeup(dev, 1);
+	} else {
+		musb->irq_wake = 0;
+	}
+
+	/* program PHY to use external vBus if required */
+	if (plat->extvbus) {
+		u8 busctl = musb_readb(musb->mregs, MUSB_ULPI_BUSCONTROL);
+		busctl |= MUSB_ULPI_USE_EXTVBUS;
+		musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl);
+	}
+
+	MUSB_DEV_MODE(musb);
+	musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+
+	switch (musb->port_mode) {
+	case MUSB_HOST:
+		status = musb_host_setup(musb, plat->power);
+		if (status < 0)
+			goto fail3;
+		status = musb_platform_set_mode(musb, MUSB_HOST);
+		break;
+	case MUSB_PERIPHERAL:
+		status = musb_gadget_setup(musb);
+		if (status < 0)
+			goto fail3;
+		status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
+		break;
+	case MUSB_OTG:
+		status = musb_host_setup(musb, plat->power);
+		if (status < 0)
+			goto fail3;
+		status = musb_gadget_setup(musb);
+		if (status) {
+			musb_host_cleanup(musb);
+			goto fail3;
+		}
+		status = musb_platform_set_mode(musb, MUSB_OTG);
+		break;
+	default:
+		dev_err(dev, "unsupported port mode %d\n", musb->port_mode);
+		break;
+	}
+
+	if (status < 0)
+		goto fail3;
+
+	musb_init_debugfs(musb);
+
+	musb->is_initialized = 1;
+	pm_runtime_mark_last_busy(musb->controller);
+	pm_runtime_put_autosuspend(musb->controller);
+
+	return 0;
+
+fail3:
+	cancel_delayed_work_sync(&musb->irq_work);
+	cancel_delayed_work_sync(&musb->finish_resume_work);
+	cancel_delayed_work_sync(&musb->deassert_reset_work);
+	if (musb->dma_controller)
+		musb_dma_controller_destroy(musb->dma_controller);
+
+fail2_5:
+	usb_phy_shutdown(musb->xceiv);
+
+err_usb_phy_init:
+	pm_runtime_dont_use_autosuspend(musb->controller);
+	pm_runtime_put_sync(musb->controller);
+	pm_runtime_disable(musb->controller);
+
+fail2:
+	if (musb->irq_wake)
+		device_init_wakeup(dev, 0);
+	musb_platform_exit(musb);
+
+fail1:
+	dev_err_probe(musb->controller, status, "%s failed\n", __func__);
+
+	musb_free(musb);
+
+fail0:
+
+	return status;
+
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just
+ * bridge to a platform device; this driver then suffices.
+ */
+static int musb_probe(struct platform_device *pdev)
+{
+	struct device	*dev = &pdev->dev;
+	int		irq = platform_get_irq_byname(pdev, "mc");
+	void __iomem	*base;
+
+	if (irq <= 0)
+		return -ENODEV;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	return musb_init_controller(dev, irq, base);
+}
+
+static int musb_remove(struct platform_device *pdev)
+{
+	struct device	*dev = &pdev->dev;
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+
+	/* this gets called on rmmod.
+	 *  - Host mode: host may still be active
+	 *  - Peripheral mode: peripheral is deactivated (or never-activated)
+	 *  - OTG mode: both roles are deactivated (or never-activated)
+	 */
+	musb_exit_debugfs(musb);
+
+	cancel_delayed_work_sync(&musb->irq_work);
+	cancel_delayed_work_sync(&musb->finish_resume_work);
+	cancel_delayed_work_sync(&musb->deassert_reset_work);
+	pm_runtime_get_sync(musb->controller);
+	musb_host_cleanup(musb);
+	musb_gadget_cleanup(musb);
+
+	musb_platform_disable(musb);
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_disable_interrupts(musb);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	spin_unlock_irqrestore(&musb->lock, flags);
+	musb_platform_exit(musb);
+
+	pm_runtime_dont_use_autosuspend(musb->controller);
+	pm_runtime_put_sync(musb->controller);
+	pm_runtime_disable(musb->controller);
+	musb_phy_callback = NULL;
+	if (musb->dma_controller)
+		musb_dma_controller_destroy(musb->dma_controller);
+	usb_phy_shutdown(musb->xceiv);
+	musb_free(musb);
+	device_init_wakeup(dev, 0);
+	return 0;
+}
+
+#ifdef	CONFIG_PM
+
+static void musb_save_context(struct musb *musb)
+{
+	int i;
+	void __iomem *musb_base = musb->mregs;
+	void __iomem *epio;
+
+	musb->context.frame = musb_readw(musb_base, MUSB_FRAME);
+	musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
+	musb->context.busctl = musb_readb(musb_base, MUSB_ULPI_BUSCONTROL);
+	musb->context.power = musb_readb(musb_base, MUSB_POWER);
+	musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
+	musb->context.index = musb_readb(musb_base, MUSB_INDEX);
+	musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
+
+	for (i = 0; i < musb->config->num_eps; ++i) {
+		epio = musb->endpoints[i].regs;
+		if (!epio)
+			continue;
+
+		musb_writeb(musb_base, MUSB_INDEX, i);
+		musb->context.index_regs[i].txmaxp =
+			musb_readw(epio, MUSB_TXMAXP);
+		musb->context.index_regs[i].txcsr =
+			musb_readw(epio, MUSB_TXCSR);
+		musb->context.index_regs[i].rxmaxp =
+			musb_readw(epio, MUSB_RXMAXP);
+		musb->context.index_regs[i].rxcsr =
+			musb_readw(epio, MUSB_RXCSR);
+
+		if (musb->dyn_fifo) {
+			musb->context.index_regs[i].txfifoadd =
+					musb_readw(musb_base, MUSB_TXFIFOADD);
+			musb->context.index_regs[i].rxfifoadd =
+					musb_readw(musb_base, MUSB_RXFIFOADD);
+			musb->context.index_regs[i].txfifosz =
+					musb_readb(musb_base, MUSB_TXFIFOSZ);
+			musb->context.index_regs[i].rxfifosz =
+					musb_readb(musb_base, MUSB_RXFIFOSZ);
+		}
+
+		musb->context.index_regs[i].txtype =
+			musb_readb(epio, MUSB_TXTYPE);
+		musb->context.index_regs[i].txinterval =
+			musb_readb(epio, MUSB_TXINTERVAL);
+		musb->context.index_regs[i].rxtype =
+			musb_readb(epio, MUSB_RXTYPE);
+		musb->context.index_regs[i].rxinterval =
+			musb_readb(epio, MUSB_RXINTERVAL);
+
+		musb->context.index_regs[i].txfunaddr =
+			musb_read_txfunaddr(musb, i);
+		musb->context.index_regs[i].txhubaddr =
+			musb_read_txhubaddr(musb, i);
+		musb->context.index_regs[i].txhubport =
+			musb_read_txhubport(musb, i);
+
+		musb->context.index_regs[i].rxfunaddr =
+			musb_read_rxfunaddr(musb, i);
+		musb->context.index_regs[i].rxhubaddr =
+			musb_read_rxhubaddr(musb, i);
+		musb->context.index_regs[i].rxhubport =
+			musb_read_rxhubport(musb, i);
+	}
+}
+
+static void musb_restore_context(struct musb *musb)
+{
+	int i;
+	void __iomem *musb_base = musb->mregs;
+	void __iomem *epio;
+	u8 power;
+
+	musb_writew(musb_base, MUSB_FRAME, musb->context.frame);
+	musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode);
+	musb_writeb(musb_base, MUSB_ULPI_BUSCONTROL, musb->context.busctl);
+
+	/* Don't affect SUSPENDM/RESUME bits in POWER reg */
+	power = musb_readb(musb_base, MUSB_POWER);
+	power &= MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME;
+	musb->context.power &= ~(MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME);
+	power |= musb->context.power;
+	musb_writeb(musb_base, MUSB_POWER, power);
+
+	musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe);
+	musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe);
+	musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe);
+	if (musb->context.devctl & MUSB_DEVCTL_SESSION)
+		musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl);
+
+	for (i = 0; i < musb->config->num_eps; ++i) {
+		epio = musb->endpoints[i].regs;
+		if (!epio)
+			continue;
+
+		musb_writeb(musb_base, MUSB_INDEX, i);
+		musb_writew(epio, MUSB_TXMAXP,
+			musb->context.index_regs[i].txmaxp);
+		musb_writew(epio, MUSB_TXCSR,
+			musb->context.index_regs[i].txcsr);
+		musb_writew(epio, MUSB_RXMAXP,
+			musb->context.index_regs[i].rxmaxp);
+		musb_writew(epio, MUSB_RXCSR,
+			musb->context.index_regs[i].rxcsr);
+
+		if (musb->dyn_fifo) {
+			musb_writeb(musb_base, MUSB_TXFIFOSZ,
+				musb->context.index_regs[i].txfifosz);
+			musb_writeb(musb_base, MUSB_RXFIFOSZ,
+				musb->context.index_regs[i].rxfifosz);
+			musb_writew(musb_base, MUSB_TXFIFOADD,
+				musb->context.index_regs[i].txfifoadd);
+			musb_writew(musb_base, MUSB_RXFIFOADD,
+				musb->context.index_regs[i].rxfifoadd);
+		}
+
+		musb_writeb(epio, MUSB_TXTYPE,
+				musb->context.index_regs[i].txtype);
+		musb_writeb(epio, MUSB_TXINTERVAL,
+				musb->context.index_regs[i].txinterval);
+		musb_writeb(epio, MUSB_RXTYPE,
+				musb->context.index_regs[i].rxtype);
+		musb_writeb(epio, MUSB_RXINTERVAL,
+
+				musb->context.index_regs[i].rxinterval);
+		musb_write_txfunaddr(musb, i,
+				musb->context.index_regs[i].txfunaddr);
+		musb_write_txhubaddr(musb, i,
+				musb->context.index_regs[i].txhubaddr);
+		musb_write_txhubport(musb, i,
+				musb->context.index_regs[i].txhubport);
+
+		musb_write_rxfunaddr(musb, i,
+				musb->context.index_regs[i].rxfunaddr);
+		musb_write_rxhubaddr(musb, i,
+				musb->context.index_regs[i].rxhubaddr);
+		musb_write_rxhubport(musb, i,
+				musb->context.index_regs[i].rxhubport);
+	}
+	musb_writeb(musb_base, MUSB_INDEX, musb->context.index);
+}
+
+static int musb_suspend(struct device *dev)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+	int ret;
+
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(dev);
+		return ret;
+	}
+
+	musb_platform_disable(musb);
+	musb_disable_interrupts(musb);
+
+	musb->flush_irq_work = true;
+	while (flush_delayed_work(&musb->irq_work))
+		;
+	musb->flush_irq_work = false;
+
+	if (!(musb->ops->quirks & MUSB_PRESERVE_SESSION))
+		musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+
+	WARN_ON(!list_empty(&musb->pending_list));
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (is_peripheral_active(musb)) {
+		/* FIXME force disconnect unless we know USB will wake
+		 * the system up quickly enough to respond ...
+		 */
+	} else if (is_host_active(musb)) {
+		/* we know all the children are suspended; sometimes
+		 * they will even be wakeup-enabled.
+		 */
+	}
+
+	musb_save_context(musb);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return 0;
+}
+
+static int musb_resume(struct device *dev)
+{
+	struct musb *musb = dev_to_musb(dev);
+	unsigned long flags;
+	int error;
+	u8 devctl;
+	u8 mask;
+
+	/*
+	 * For static cmos like DaVinci, register values were preserved
+	 * unless for some reason the whole soc powered down or the USB
+	 * module got reset through the PSC (vs just being disabled).
+	 *
+	 * For the DSPS glue layer though, a full register restore has to
+	 * be done. As it shouldn't harm other platforms, we do it
+	 * unconditionally.
+	 */
+
+	musb_restore_context(musb);
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+	mask = MUSB_DEVCTL_BDEVICE | MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV;
+	if ((devctl & mask) != (musb->context.devctl & mask))
+		musb->port1_status = 0;
+
+	musb_enable_interrupts(musb);
+	musb_platform_enable(musb);
+
+	/* session might be disabled in suspend */
+	if (musb->port_mode == MUSB_HOST &&
+	    !(musb->ops->quirks & MUSB_PRESERVE_SESSION)) {
+		devctl |= MUSB_DEVCTL_SESSION;
+		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+	}
+
+	spin_lock_irqsave(&musb->lock, flags);
+	error = musb_run_resume_work(musb);
+	if (error)
+		dev_err(musb->controller, "resume work failed with %i\n",
+			error);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
+}
+
+static int musb_runtime_suspend(struct device *dev)
+{
+	struct musb	*musb = dev_to_musb(dev);
+
+	musb_save_context(musb);
+	musb->is_runtime_suspended = 1;
+
+	return 0;
+}
+
+static int musb_runtime_resume(struct device *dev)
+{
+	struct musb *musb = dev_to_musb(dev);
+	unsigned long flags;
+	int error;
+
+	/*
+	 * When pm_runtime_get_sync called for the first time in driver
+	 * init,  some of the structure is still not initialized which is
+	 * used in restore function. But clock needs to be
+	 * enabled before any register access, so
+	 * pm_runtime_get_sync has to be called.
+	 * Also context restore without save does not make
+	 * any sense
+	 */
+	if (!musb->is_initialized)
+		return 0;
+
+	musb_restore_context(musb);
+
+	spin_lock_irqsave(&musb->lock, flags);
+	error = musb_run_resume_work(musb);
+	if (error)
+		dev_err(musb->controller, "resume work failed with %i\n",
+			error);
+	musb->is_runtime_suspended = 0;
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return 0;
+}
+
+static const struct dev_pm_ops musb_dev_pm_ops = {
+	.suspend	= musb_suspend,
+	.resume		= musb_resume,
+	.runtime_suspend = musb_runtime_suspend,
+	.runtime_resume = musb_runtime_resume,
+};
+
+#define MUSB_DEV_PM_OPS (&musb_dev_pm_ops)
+#else
+#define	MUSB_DEV_PM_OPS	NULL
+#endif
+
+static struct platform_driver musb_driver = {
+	.driver = {
+		.name		= musb_driver_name,
+		.bus		= &platform_bus_type,
+		.pm		= MUSB_DEV_PM_OPS,
+		.dev_groups	= musb_groups,
+	},
+	.probe		= musb_probe,
+	.remove		= musb_remove,
+};
+
+module_platform_driver(musb_driver);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
new file mode 100644
index 000000000..a8a65effe
--- /dev/null
+++ b/drivers/usb/musb/musb_core.h
@@ -0,0 +1,601 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * MUSB OTG driver defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ */
+
+#ifndef __MUSB_CORE_H__
+#define __MUSB_CORE_H__
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/musb.h>
+#include <linux/phy/phy.h>
+#include <linux/workqueue.h>
+
+struct musb;
+struct musb_hw_ep;
+struct musb_ep;
+struct musb_qh;
+
+/* Helper defines for struct musb->hwvers */
+#define MUSB_HWVERS_MAJOR(x)	((x >> 10) & 0x1f)
+#define MUSB_HWVERS_MINOR(x)	(x & 0x3ff)
+#define MUSB_HWVERS_RC		0x8000
+#define MUSB_HWVERS_1300	0x52C
+#define MUSB_HWVERS_1400	0x590
+#define MUSB_HWVERS_1800	0x720
+#define MUSB_HWVERS_1900	0x784
+#define MUSB_HWVERS_2000	0x800
+
+#include "musb_debug.h"
+#include "musb_dma.h"
+
+#include "musb_io.h"
+
+#include "musb_gadget.h"
+#include <linux/usb/hcd.h>
+#include "musb_host.h"
+
+/* NOTE:  otg and peripheral-only state machines start at B_IDLE.
+ * OTG or host-only go to A_IDLE when ID is sensed.
+ */
+#define is_peripheral_active(m)		(!(m)->is_host)
+#define is_host_active(m)		((m)->is_host)
+
+/****************************** CONSTANTS ********************************/
+
+#ifndef MUSB_C_NUM_EPS
+#define MUSB_C_NUM_EPS ((u8)16)
+#endif
+
+#ifndef MUSB_MAX_END0_PACKET
+#define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE)
+#endif
+
+/* host side ep0 states */
+enum musb_h_ep0_state {
+	MUSB_EP0_IDLE,
+	MUSB_EP0_START,			/* expect ack of setup */
+	MUSB_EP0_IN,			/* expect IN DATA */
+	MUSB_EP0_OUT,			/* expect ack of OUT DATA */
+	MUSB_EP0_STATUS,		/* expect ack of STATUS */
+} __attribute__ ((packed));
+
+/* peripheral side ep0 states */
+enum musb_g_ep0_state {
+	MUSB_EP0_STAGE_IDLE,		/* idle, waiting for SETUP */
+	MUSB_EP0_STAGE_SETUP,		/* received SETUP */
+	MUSB_EP0_STAGE_TX,		/* IN data */
+	MUSB_EP0_STAGE_RX,		/* OUT data */
+	MUSB_EP0_STAGE_STATUSIN,	/* (after OUT data) */
+	MUSB_EP0_STAGE_STATUSOUT,	/* (after IN data) */
+	MUSB_EP0_STAGE_ACKWAIT,		/* after zlp, before statusin */
+} __attribute__ ((packed));
+
+/*
+ * OTG protocol constants.  See USB OTG 1.3 spec,
+ * sections 5.5 "Device Timings" and 6.6.5 "Timers".
+ */
+#define OTG_TIME_A_WAIT_VRISE	100		/* msec (max) */
+#define OTG_TIME_A_WAIT_BCON	1100		/* min 1 second */
+#define OTG_TIME_A_AIDL_BDIS	200		/* min 200 msec */
+#define OTG_TIME_B_ASE0_BRST	100		/* min 3.125 ms */
+
+/****************************** FUNCTIONS ********************************/
+
+#define MUSB_HST_MODE(_musb)\
+	{ (_musb)->is_host = true; }
+#define MUSB_DEV_MODE(_musb) \
+	{ (_musb)->is_host = false; }
+
+#define test_devctl_hst_mode(_x) \
+	(musb_readb((_x)->mregs, MUSB_DEVCTL)&MUSB_DEVCTL_HM)
+
+#define MUSB_MODE(musb) ((musb)->is_host ? "Host" : "Peripheral")
+
+/******************************** TYPES *************************************/
+
+struct musb_io;
+
+/**
+ * struct musb_platform_ops - Operations passed to musb_core by HW glue layer
+ * @quirks:	flags for platform specific quirks
+ * @enable:	enable device
+ * @disable:	disable device
+ * @ep_offset:	returns the end point offset
+ * @ep_select:	selects the specified end point
+ * @fifo_mode:	sets the fifo mode
+ * @fifo_offset: returns the fifo offset
+ * @readb:	read 8 bits
+ * @writeb:	write 8 bits
+ * @clearb:	could be clear-on-readb or W1C
+ * @readw:	read 16 bits
+ * @writew:	write 16 bits
+ * @clearw:	could be clear-on-readw or W1C
+ * @read_fifo:	reads the fifo
+ * @write_fifo:	writes to fifo
+ * @get_toggle:	platform specific get toggle function
+ * @set_toggle:	platform specific set toggle function
+ * @dma_init:	platform specific dma init function
+ * @dma_exit:	platform specific dma exit function
+ * @init:	turns on clocks, sets up platform-specific registers, etc
+ * @exit:	undoes @init
+ * @set_mode:	forcefully changes operating mode
+ * @try_idle:	tries to idle the IP
+ * @recover:	platform-specific babble recovery
+ * @vbus_status: returns vbus status if possible
+ * @set_vbus:	forces vbus status
+ * @pre_root_reset_end: called before the root usb port reset flag gets cleared
+ * @post_root_reset_end: called after the root usb port reset flag gets cleared
+ * @phy_callback: optional callback function for the phy to call
+ */
+struct musb_platform_ops {
+
+#define MUSB_G_NO_SKB_RESERVE	BIT(9)
+#define MUSB_DA8XX		BIT(8)
+#define MUSB_PRESERVE_SESSION	BIT(7)
+#define MUSB_DMA_UX500		BIT(6)
+#define MUSB_DMA_CPPI41		BIT(5)
+#define MUSB_DMA_CPPI		BIT(4)
+#define MUSB_DMA_TUSB_OMAP	BIT(3)
+#define MUSB_DMA_INVENTRA	BIT(2)
+#define MUSB_IN_TUSB		BIT(1)
+#define MUSB_INDEXED_EP		BIT(0)
+	u32	quirks;
+
+	int	(*init)(struct musb *musb);
+	int	(*exit)(struct musb *musb);
+
+	void	(*enable)(struct musb *musb);
+	void	(*disable)(struct musb *musb);
+
+	u32	(*ep_offset)(u8 epnum, u16 offset);
+	void	(*ep_select)(void __iomem *mbase, u8 epnum);
+	u16	fifo_mode;
+	u32	(*fifo_offset)(u8 epnum);
+	u32	(*busctl_offset)(u8 epnum, u16 offset);
+	u8	(*readb)(void __iomem *addr, u32 offset);
+	void	(*writeb)(void __iomem *addr, u32 offset, u8 data);
+	u8	(*clearb)(void __iomem *addr, u32 offset);
+	u16	(*readw)(void __iomem *addr, u32 offset);
+	void	(*writew)(void __iomem *addr, u32 offset, u16 data);
+	u16	(*clearw)(void __iomem *addr, u32 offset);
+	void	(*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf);
+	void	(*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf);
+	u16	(*get_toggle)(struct musb_qh *qh, int is_out);
+	u16	(*set_toggle)(struct musb_qh *qh, int is_out, struct urb *urb);
+	struct dma_controller *
+		(*dma_init) (struct musb *musb, void __iomem *base);
+	void	(*dma_exit)(struct dma_controller *c);
+	int	(*set_mode)(struct musb *musb, u8 mode);
+	void	(*try_idle)(struct musb *musb, unsigned long timeout);
+	int	(*recover)(struct musb *musb);
+
+	int	(*vbus_status)(struct musb *musb);
+	void	(*set_vbus)(struct musb *musb, int on);
+
+	void	(*pre_root_reset_end)(struct musb *musb);
+	void	(*post_root_reset_end)(struct musb *musb);
+	int	(*phy_callback)(enum musb_vbus_id_status status);
+	void	(*clear_ep_rxintr)(struct musb *musb, int epnum);
+};
+
+/*
+ * struct musb_hw_ep - endpoint hardware (bidirectional)
+ *
+ * Ordered slightly for better cacheline locality.
+ */
+struct musb_hw_ep {
+	struct musb		*musb;
+	void __iomem		*fifo;
+	void __iomem		*regs;
+
+#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
+	void __iomem		*conf;
+#endif
+
+	/* index in musb->endpoints[]  */
+	u8			epnum;
+
+	/* hardware configuration, possibly dynamic */
+	bool			is_shared_fifo;
+	bool			tx_double_buffered;
+	bool			rx_double_buffered;
+	u16			max_packet_sz_tx;
+	u16			max_packet_sz_rx;
+
+	struct dma_channel	*tx_channel;
+	struct dma_channel	*rx_channel;
+
+#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
+	/* TUSB has "asynchronous" and "synchronous" dma modes */
+	dma_addr_t		fifo_async;
+	dma_addr_t		fifo_sync;
+	void __iomem		*fifo_sync_va;
+#endif
+
+	/* currently scheduled peripheral endpoint */
+	struct musb_qh		*in_qh;
+	struct musb_qh		*out_qh;
+
+	u8			rx_reinit;
+	u8			tx_reinit;
+
+	/* peripheral side */
+	struct musb_ep		ep_in;			/* TX */
+	struct musb_ep		ep_out;			/* RX */
+};
+
+static inline struct musb_request *next_in_request(struct musb_hw_ep *hw_ep)
+{
+	return next_request(&hw_ep->ep_in);
+}
+
+static inline struct musb_request *next_out_request(struct musb_hw_ep *hw_ep)
+{
+	return next_request(&hw_ep->ep_out);
+}
+
+struct musb_csr_regs {
+	/* FIFO registers */
+	u16 txmaxp, txcsr, rxmaxp, rxcsr;
+	u16 rxfifoadd, txfifoadd;
+	u8 txtype, txinterval, rxtype, rxinterval;
+	u8 rxfifosz, txfifosz;
+	u8 txfunaddr, txhubaddr, txhubport;
+	u8 rxfunaddr, rxhubaddr, rxhubport;
+};
+
+struct musb_context_registers {
+
+	u8 power;
+	u8 intrusbe;
+	u16 frame;
+	u8 index, testmode;
+
+	u8 devctl, busctl, misc;
+	u32 otg_interfsel;
+
+	struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
+};
+
+/*
+ * struct musb - Driver instance data.
+ */
+struct musb {
+	/* device lock */
+	spinlock_t		lock;
+	spinlock_t		list_lock;	/* resume work list lock */
+
+	struct musb_io		io;
+	const struct musb_platform_ops *ops;
+	struct musb_context_registers context;
+
+	irqreturn_t		(*isr)(int, void *);
+	struct delayed_work	irq_work;
+	struct delayed_work	deassert_reset_work;
+	struct delayed_work	finish_resume_work;
+	struct delayed_work	gadget_work;
+	u16			hwvers;
+
+	u16			intrrxe;
+	u16			intrtxe;
+/* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
+#define MUSB_PORT_STAT_RESUME	(1 << 31)
+
+	u32			port1_status;
+
+	unsigned long		rh_timer;
+
+	enum musb_h_ep0_state	ep0_stage;
+
+	/* bulk traffic normally dedicates endpoint hardware, and each
+	 * direction has its own ring of host side endpoints.
+	 * we try to progress the transfer at the head of each endpoint's
+	 * queue until it completes or NAKs too much; then we try the next
+	 * endpoint.
+	 */
+	struct musb_hw_ep	*bulk_ep;
+
+	struct list_head	control;	/* of musb_qh */
+	struct list_head	in_bulk;	/* of musb_qh */
+	struct list_head	out_bulk;	/* of musb_qh */
+	struct list_head	pending_list;	/* pending work list */
+
+	struct timer_list	otg_timer;
+	struct timer_list	dev_timer;
+	struct notifier_block	nb;
+
+	struct dma_controller	*dma_controller;
+
+	struct device		*controller;
+	void __iomem		*ctrl_base;
+	void __iomem		*mregs;
+
+#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
+	dma_addr_t		async;
+	dma_addr_t		sync;
+	void __iomem		*sync_va;
+	u8			tusb_revision;
+#endif
+
+	/* passed down from chip/board specific irq handlers */
+	u8			int_usb;
+	u16			int_rx;
+	u16			int_tx;
+
+	struct usb_phy		*xceiv;
+	struct phy		*phy;
+
+	int nIrq;
+	unsigned		irq_wake:1;
+
+	struct musb_hw_ep	 endpoints[MUSB_C_NUM_EPS];
+#define control_ep		endpoints
+
+#define VBUSERR_RETRY_COUNT	3
+	u16			vbuserr_retry;
+	u16 epmask;
+	u8 nr_endpoints;
+
+	int			(*board_set_power)(int state);
+
+	u8			min_power;	/* vbus for periph, in mA/2 */
+
+	enum musb_mode		port_mode;
+	bool			session;
+	unsigned long		quirk_retries;
+	bool			is_host;
+
+	int			a_wait_bcon;	/* VBUS timeout in msecs */
+	unsigned long		idle_timeout;	/* Next timeout in jiffies */
+
+	unsigned		is_initialized:1;
+	unsigned		is_runtime_suspended:1;
+
+	/* active means connected and not suspended */
+	unsigned		is_active:1;
+
+	unsigned is_multipoint:1;
+
+	unsigned		hb_iso_rx:1;	/* high bandwidth iso rx? */
+	unsigned		hb_iso_tx:1;	/* high bandwidth iso tx? */
+	unsigned		dyn_fifo:1;	/* dynamic FIFO supported? */
+
+	unsigned		bulk_split:1;
+#define	can_bulk_split(musb, type) \
+	(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split)
+
+	unsigned		bulk_combine:1;
+#define	can_bulk_combine(musb, type) \
+	(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine)
+
+	/* is_suspended means USB B_PERIPHERAL suspend */
+	unsigned		is_suspended:1;
+
+	/* may_wakeup means remote wakeup is enabled */
+	unsigned		may_wakeup:1;
+
+	/* is_self_powered is reported in device status and the
+	 * config descriptor.  is_bus_powered means B_PERIPHERAL
+	 * draws some VBUS current; both can be true.
+	 */
+	unsigned		is_self_powered:1;
+	unsigned		is_bus_powered:1;
+
+	unsigned		set_address:1;
+	unsigned		test_mode:1;
+	unsigned		softconnect:1;
+
+	unsigned		flush_irq_work:1;
+
+	u8			address;
+	u8			test_mode_nr;
+	u16			ackpend;		/* ep0 */
+	enum musb_g_ep0_state	ep0_state;
+	struct usb_gadget	g;			/* the gadget */
+	struct usb_gadget_driver *gadget_driver;	/* its driver */
+	struct usb_hcd		*hcd;			/* the usb hcd */
+
+	const struct musb_hdrc_config *config;
+
+	int			xceiv_old_state;
+#ifdef CONFIG_DEBUG_FS
+	struct dentry		*debugfs_root;
+#endif
+};
+
+/* This must be included after struct musb is defined */
+#include "musb_regs.h"
+
+static inline struct musb *gadget_to_musb(struct usb_gadget *g)
+{
+	return container_of(g, struct musb, g);
+}
+
+static inline char *musb_ep_xfertype_string(u8 type)
+{
+	char *s;
+
+	switch (type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		s = "ctrl";
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		s = "iso";
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		s = "bulk";
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		s = "int";
+		break;
+	default:
+		s = "";
+		break;
+	}
+	return s;
+}
+
+static inline int musb_read_fifosize(struct musb *musb,
+		struct musb_hw_ep *hw_ep, u8 epnum)
+{
+	void __iomem *mbase = musb->mregs;
+	u8 reg = 0;
+
+	/* read from core using indexed model */
+	reg = musb_readb(mbase, musb->io.ep_offset(epnum, MUSB_FIFOSIZE));
+	/* 0's returned when no more endpoints */
+	if (!reg)
+		return -ENODEV;
+
+	musb->nr_endpoints++;
+	musb->epmask |= (1 << epnum);
+
+	hw_ep->max_packet_sz_tx = 1 << (reg & 0x0f);
+
+	/* shared TX/RX FIFO? */
+	if ((reg & 0xf0) == 0xf0) {
+		hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx;
+		hw_ep->is_shared_fifo = true;
+		return 0;
+	} else {
+		hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4);
+		hw_ep->is_shared_fifo = false;
+	}
+
+	return 0;
+}
+
+static inline void musb_configure_ep0(struct musb *musb)
+{
+	musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
+	musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
+	musb->endpoints[0].is_shared_fifo = true;
+}
+
+/***************************** Glue it together *****************************/
+
+extern const char musb_driver_name[];
+
+extern void musb_stop(struct musb *musb);
+extern void musb_start(struct musb *musb);
+
+extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
+extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);
+
+extern int musb_set_host(struct musb *musb);
+extern int musb_set_peripheral(struct musb *musb);
+
+extern void musb_load_testpacket(struct musb *);
+
+extern irqreturn_t musb_interrupt(struct musb *);
+
+extern void musb_hnp_stop(struct musb *musb);
+
+int musb_queue_resume_work(struct musb *musb,
+			   int (*callback)(struct musb *musb, void *data),
+			   void *data);
+
+static inline void musb_platform_set_vbus(struct musb *musb, int is_on)
+{
+	if (musb->ops->set_vbus)
+		musb->ops->set_vbus(musb, is_on);
+}
+
+static inline void musb_platform_enable(struct musb *musb)
+{
+	if (musb->ops->enable)
+		musb->ops->enable(musb);
+}
+
+static inline void musb_platform_disable(struct musb *musb)
+{
+	if (musb->ops->disable)
+		musb->ops->disable(musb);
+}
+
+static inline int musb_platform_set_mode(struct musb *musb, u8 mode)
+{
+	if (!musb->ops->set_mode)
+		return 0;
+
+	return musb->ops->set_mode(musb, mode);
+}
+
+static inline void musb_platform_try_idle(struct musb *musb,
+		unsigned long timeout)
+{
+	if (musb->ops->try_idle)
+		musb->ops->try_idle(musb, timeout);
+}
+
+static inline int  musb_platform_recover(struct musb *musb)
+{
+	if (!musb->ops->recover)
+		return 0;
+
+	return musb->ops->recover(musb);
+}
+
+static inline int musb_platform_get_vbus_status(struct musb *musb)
+{
+	if (!musb->ops->vbus_status)
+		return -EINVAL;
+
+	return musb->ops->vbus_status(musb);
+}
+
+static inline int musb_platform_init(struct musb *musb)
+{
+	if (!musb->ops->init)
+		return -EINVAL;
+
+	return musb->ops->init(musb);
+}
+
+static inline int musb_platform_exit(struct musb *musb)
+{
+	if (!musb->ops->exit)
+		return -EINVAL;
+
+	return musb->ops->exit(musb);
+}
+
+static inline void musb_platform_pre_root_reset_end(struct musb *musb)
+{
+	if (musb->ops->pre_root_reset_end)
+		musb->ops->pre_root_reset_end(musb);
+}
+
+static inline void musb_platform_post_root_reset_end(struct musb *musb)
+{
+	if (musb->ops->post_root_reset_end)
+		musb->ops->post_root_reset_end(musb);
+}
+
+static inline void musb_platform_clear_ep_rxintr(struct musb *musb, int epnum)
+{
+	if (musb->ops->clear_ep_rxintr)
+		musb->ops->clear_ep_rxintr(musb, epnum);
+}
+
+/*
+ * gets the "dr_mode" property from DT and converts it into musb_mode
+ * if the property is not found or not recognized returns MUSB_OTG
+ */
+extern enum musb_mode musb_get_mode(struct device *dev);
+
+#endif	/* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
new file mode 100644
index 000000000..9589243e8
--- /dev/null
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -0,0 +1,811 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/sizes.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#include "cppi_dma.h"
+#include "musb_core.h"
+#include "musb_trace.h"
+
+#define RNDIS_REG(x) (0x80 + ((x - 1) * 4))
+
+#define EP_MODE_AUTOREQ_NONE		0
+#define EP_MODE_AUTOREQ_ALL_NEOP	1
+#define EP_MODE_AUTOREQ_ALWAYS		3
+
+#define EP_MODE_DMA_TRANSPARENT		0
+#define EP_MODE_DMA_RNDIS		1
+#define EP_MODE_DMA_GEN_RNDIS		3
+
+#define USB_CTRL_TX_MODE	0x70
+#define USB_CTRL_RX_MODE	0x74
+#define USB_CTRL_AUTOREQ	0xd0
+#define USB_TDOWN		0xd8
+
+#define MUSB_DMA_NUM_CHANNELS 15
+
+#define DA8XX_USB_MODE		0x10
+#define DA8XX_USB_AUTOREQ	0x14
+#define DA8XX_USB_TEARDOWN	0x1c
+
+#define DA8XX_DMA_NUM_CHANNELS 4
+
+struct cppi41_dma_controller {
+	struct dma_controller controller;
+	struct cppi41_dma_channel *rx_channel;
+	struct cppi41_dma_channel *tx_channel;
+	struct hrtimer early_tx;
+	struct list_head early_tx_list;
+	u32 rx_mode;
+	u32 tx_mode;
+	u32 auto_req;
+
+	u32 tdown_reg;
+	u32 autoreq_reg;
+
+	void (*set_dma_mode)(struct cppi41_dma_channel *cppi41_channel,
+			     unsigned int mode);
+	u8 num_channels;
+};
+
+static void save_rx_toggle(struct cppi41_dma_channel *cppi41_channel)
+{
+	u16 csr;
+	u8 toggle;
+
+	if (cppi41_channel->is_tx)
+		return;
+	if (!is_host_active(cppi41_channel->controller->controller.musb))
+		return;
+
+	csr = musb_readw(cppi41_channel->hw_ep->regs, MUSB_RXCSR);
+	toggle = csr & MUSB_RXCSR_H_DATATOGGLE ? 1 : 0;
+
+	cppi41_channel->usb_toggle = toggle;
+}
+
+static void update_rx_toggle(struct cppi41_dma_channel *cppi41_channel)
+{
+	struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
+	struct musb *musb = hw_ep->musb;
+	u16 csr;
+	u8 toggle;
+
+	if (cppi41_channel->is_tx)
+		return;
+	if (!is_host_active(musb))
+		return;
+
+	musb_ep_select(musb->mregs, hw_ep->epnum);
+	csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+	toggle = csr & MUSB_RXCSR_H_DATATOGGLE ? 1 : 0;
+
+	/*
+	 * AM335x Advisory 1.0.13: Due to internal synchronisation error the
+	 * data toggle may reset from DATA1 to DATA0 during receiving data from
+	 * more than one endpoint.
+	 */
+	if (!toggle && toggle == cppi41_channel->usb_toggle) {
+		csr |= MUSB_RXCSR_H_DATATOGGLE | MUSB_RXCSR_H_WR_DATATOGGLE;
+		musb_writew(cppi41_channel->hw_ep->regs, MUSB_RXCSR, csr);
+		musb_dbg(musb, "Restoring DATA1 toggle.");
+	}
+
+	cppi41_channel->usb_toggle = toggle;
+}
+
+static bool musb_is_tx_fifo_empty(struct musb_hw_ep *hw_ep)
+{
+	u8		epnum = hw_ep->epnum;
+	struct musb	*musb = hw_ep->musb;
+	void __iomem	*epio = musb->endpoints[epnum].regs;
+	u16		csr;
+
+	musb_ep_select(musb->mregs, hw_ep->epnum);
+	csr = musb_readw(epio, MUSB_TXCSR);
+	if (csr & MUSB_TXCSR_TXPKTRDY)
+		return false;
+	return true;
+}
+
+static void cppi41_dma_callback(void *private_data,
+				const struct dmaengine_result *result);
+
+static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel)
+{
+	struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
+	struct musb *musb = hw_ep->musb;
+	void __iomem *epio = hw_ep->regs;
+	u16 csr;
+
+	if (!cppi41_channel->prog_len ||
+	    (cppi41_channel->channel.status == MUSB_DMA_STATUS_FREE)) {
+
+		/* done, complete */
+		cppi41_channel->channel.actual_len =
+			cppi41_channel->transferred;
+		cppi41_channel->channel.status = MUSB_DMA_STATUS_FREE;
+		cppi41_channel->channel.rx_packet_done = true;
+
+		/*
+		 * transmit ZLP using PIO mode for transfers which size is
+		 * multiple of EP packet size.
+		 */
+		if (cppi41_channel->tx_zlp && (cppi41_channel->transferred %
+					cppi41_channel->packet_sz) == 0) {
+			musb_ep_select(musb->mregs, hw_ep->epnum);
+			csr = MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY;
+			musb_writew(epio, MUSB_TXCSR, csr);
+		}
+
+		trace_musb_cppi41_done(cppi41_channel);
+		musb_dma_completion(musb, hw_ep->epnum, cppi41_channel->is_tx);
+	} else {
+		/* next iteration, reload */
+		struct dma_chan *dc = cppi41_channel->dc;
+		struct dma_async_tx_descriptor *dma_desc;
+		enum dma_transfer_direction direction;
+		u32 remain_bytes;
+
+		cppi41_channel->buf_addr += cppi41_channel->packet_sz;
+
+		remain_bytes = cppi41_channel->total_len;
+		remain_bytes -= cppi41_channel->transferred;
+		remain_bytes = min(remain_bytes, cppi41_channel->packet_sz);
+		cppi41_channel->prog_len = remain_bytes;
+
+		direction = cppi41_channel->is_tx ? DMA_MEM_TO_DEV
+			: DMA_DEV_TO_MEM;
+		dma_desc = dmaengine_prep_slave_single(dc,
+				cppi41_channel->buf_addr,
+				remain_bytes,
+				direction,
+				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+		if (WARN_ON(!dma_desc))
+			return;
+
+		dma_desc->callback_result = cppi41_dma_callback;
+		dma_desc->callback_param = &cppi41_channel->channel;
+		cppi41_channel->cookie = dma_desc->tx_submit(dma_desc);
+		trace_musb_cppi41_cont(cppi41_channel);
+		dma_async_issue_pending(dc);
+
+		if (!cppi41_channel->is_tx) {
+			musb_ep_select(musb->mregs, hw_ep->epnum);
+			csr = musb_readw(epio, MUSB_RXCSR);
+			csr |= MUSB_RXCSR_H_REQPKT;
+			musb_writew(epio, MUSB_RXCSR, csr);
+		}
+	}
+}
+
+static enum hrtimer_restart cppi41_recheck_tx_req(struct hrtimer *timer)
+{
+	struct cppi41_dma_controller *controller;
+	struct cppi41_dma_channel *cppi41_channel, *n;
+	struct musb *musb;
+	unsigned long flags;
+	enum hrtimer_restart ret = HRTIMER_NORESTART;
+
+	controller = container_of(timer, struct cppi41_dma_controller,
+			early_tx);
+	musb = controller->controller.musb;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	list_for_each_entry_safe(cppi41_channel, n, &controller->early_tx_list,
+			tx_check) {
+		bool empty;
+		struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
+
+		empty = musb_is_tx_fifo_empty(hw_ep);
+		if (empty) {
+			list_del_init(&cppi41_channel->tx_check);
+			cppi41_trans_done(cppi41_channel);
+		}
+	}
+
+	if (!list_empty(&controller->early_tx_list) &&
+	    !hrtimer_is_queued(&controller->early_tx)) {
+		ret = HRTIMER_RESTART;
+		hrtimer_forward_now(&controller->early_tx, 20 * NSEC_PER_USEC);
+	}
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return ret;
+}
+
+static void cppi41_dma_callback(void *private_data,
+				const struct dmaengine_result *result)
+{
+	struct dma_channel *channel = private_data;
+	struct cppi41_dma_channel *cppi41_channel = channel->private_data;
+	struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
+	struct cppi41_dma_controller *controller;
+	struct musb *musb = hw_ep->musb;
+	unsigned long flags;
+	struct dma_tx_state txstate;
+	u32 transferred;
+	int is_hs = 0;
+	bool empty;
+
+	controller = cppi41_channel->controller;
+	if (controller->controller.dma_callback)
+		controller->controller.dma_callback(&controller->controller);
+
+	if (result->result == DMA_TRANS_ABORTED)
+		return;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	dmaengine_tx_status(cppi41_channel->dc, cppi41_channel->cookie,
+			&txstate);
+	transferred = cppi41_channel->prog_len - txstate.residue;
+	cppi41_channel->transferred += transferred;
+
+	trace_musb_cppi41_gb(cppi41_channel);
+	update_rx_toggle(cppi41_channel);
+
+	if (cppi41_channel->transferred == cppi41_channel->total_len ||
+			transferred < cppi41_channel->packet_sz)
+		cppi41_channel->prog_len = 0;
+
+	if (cppi41_channel->is_tx) {
+		u8 type;
+
+		if (is_host_active(musb))
+			type = hw_ep->out_qh->type;
+		else
+			type = hw_ep->ep_in.type;
+
+		if (type == USB_ENDPOINT_XFER_ISOC)
+			/*
+			 * Don't use the early-TX-interrupt workaround below
+			 * for Isoch transfter. Since Isoch are periodic
+			 * transfer, by the time the next transfer is
+			 * scheduled, the current one should be done already.
+			 *
+			 * This avoids audio playback underrun issue.
+			 */
+			empty = true;
+		else
+			empty = musb_is_tx_fifo_empty(hw_ep);
+	}
+
+	if (!cppi41_channel->is_tx || empty) {
+		cppi41_trans_done(cppi41_channel);
+		goto out;
+	}
+
+	/*
+	 * On AM335x it has been observed that the TX interrupt fires
+	 * too early that means the TXFIFO is not yet empty but the DMA
+	 * engine says that it is done with the transfer. We don't
+	 * receive a FIFO empty interrupt so the only thing we can do is
+	 * to poll for the bit. On HS it usually takes 2us, on FS around
+	 * 110us - 150us depending on the transfer size.
+	 * We spin on HS (no longer than 25us and setup a timer on
+	 * FS to check for the bit and complete the transfer.
+	 */
+	if (is_host_active(musb)) {
+		if (musb->port1_status & USB_PORT_STAT_HIGH_SPEED)
+			is_hs = 1;
+	} else {
+		if (musb->g.speed == USB_SPEED_HIGH)
+			is_hs = 1;
+	}
+	if (is_hs) {
+		unsigned wait = 25;
+
+		do {
+			empty = musb_is_tx_fifo_empty(hw_ep);
+			if (empty) {
+				cppi41_trans_done(cppi41_channel);
+				goto out;
+			}
+			wait--;
+			if (!wait)
+				break;
+			cpu_relax();
+		} while (1);
+	}
+	list_add_tail(&cppi41_channel->tx_check,
+			&controller->early_tx_list);
+	if (!hrtimer_is_queued(&controller->early_tx)) {
+		unsigned long usecs = cppi41_channel->total_len / 10;
+
+		hrtimer_start_range_ns(&controller->early_tx,
+				       usecs * NSEC_PER_USEC,
+				       20 * NSEC_PER_USEC,
+				       HRTIMER_MODE_REL);
+	}
+
+out:
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static u32 update_ep_mode(unsigned ep, unsigned mode, u32 old)
+{
+	unsigned shift;
+
+	shift = (ep - 1) * 2;
+	old &= ~(3 << shift);
+	old |= mode << shift;
+	return old;
+}
+
+static void cppi41_set_dma_mode(struct cppi41_dma_channel *cppi41_channel,
+		unsigned mode)
+{
+	struct cppi41_dma_controller *controller = cppi41_channel->controller;
+	struct musb *musb = controller->controller.musb;
+	u32 port;
+	u32 new_mode;
+	u32 old_mode;
+
+	if (cppi41_channel->is_tx)
+		old_mode = controller->tx_mode;
+	else
+		old_mode = controller->rx_mode;
+	port = cppi41_channel->port_num;
+	new_mode = update_ep_mode(port, mode, old_mode);
+
+	if (new_mode == old_mode)
+		return;
+	if (cppi41_channel->is_tx) {
+		controller->tx_mode = new_mode;
+		musb_writel(musb->ctrl_base, USB_CTRL_TX_MODE, new_mode);
+	} else {
+		controller->rx_mode = new_mode;
+		musb_writel(musb->ctrl_base, USB_CTRL_RX_MODE, new_mode);
+	}
+}
+
+static void da8xx_set_dma_mode(struct cppi41_dma_channel *cppi41_channel,
+		unsigned int mode)
+{
+	struct cppi41_dma_controller *controller = cppi41_channel->controller;
+	struct musb *musb = controller->controller.musb;
+	unsigned int shift;
+	u32 port;
+	u32 new_mode;
+	u32 old_mode;
+
+	old_mode = controller->tx_mode;
+	port = cppi41_channel->port_num;
+
+	shift = (port - 1) * 4;
+	if (!cppi41_channel->is_tx)
+		shift += 16;
+	new_mode = old_mode & ~(3 << shift);
+	new_mode |= mode << shift;
+
+	if (new_mode == old_mode)
+		return;
+	controller->tx_mode = new_mode;
+	musb_writel(musb->ctrl_base, DA8XX_USB_MODE, new_mode);
+}
+
+
+static void cppi41_set_autoreq_mode(struct cppi41_dma_channel *cppi41_channel,
+		unsigned mode)
+{
+	struct cppi41_dma_controller *controller = cppi41_channel->controller;
+	u32 port;
+	u32 new_mode;
+	u32 old_mode;
+
+	old_mode = controller->auto_req;
+	port = cppi41_channel->port_num;
+	new_mode = update_ep_mode(port, mode, old_mode);
+
+	if (new_mode == old_mode)
+		return;
+	controller->auto_req = new_mode;
+	musb_writel(controller->controller.musb->ctrl_base,
+		    controller->autoreq_reg, new_mode);
+}
+
+static bool cppi41_configure_channel(struct dma_channel *channel,
+				u16 packet_sz, u8 mode,
+				dma_addr_t dma_addr, u32 len)
+{
+	struct cppi41_dma_channel *cppi41_channel = channel->private_data;
+	struct cppi41_dma_controller *controller = cppi41_channel->controller;
+	struct dma_chan *dc = cppi41_channel->dc;
+	struct dma_async_tx_descriptor *dma_desc;
+	enum dma_transfer_direction direction;
+	struct musb *musb = cppi41_channel->controller->controller.musb;
+	unsigned use_gen_rndis = 0;
+
+	cppi41_channel->buf_addr = dma_addr;
+	cppi41_channel->total_len = len;
+	cppi41_channel->transferred = 0;
+	cppi41_channel->packet_sz = packet_sz;
+	cppi41_channel->tx_zlp = (cppi41_channel->is_tx && mode) ? 1 : 0;
+
+	/*
+	 * Due to AM335x' Advisory 1.0.13 we are not allowed to transfer more
+	 * than max packet size at a time.
+	 */
+	if (cppi41_channel->is_tx)
+		use_gen_rndis = 1;
+
+	if (use_gen_rndis) {
+		/* RNDIS mode */
+		if (len > packet_sz) {
+			musb_writel(musb->ctrl_base,
+				RNDIS_REG(cppi41_channel->port_num), len);
+			/* gen rndis */
+			controller->set_dma_mode(cppi41_channel,
+					EP_MODE_DMA_GEN_RNDIS);
+
+			/* auto req */
+			cppi41_set_autoreq_mode(cppi41_channel,
+					EP_MODE_AUTOREQ_ALL_NEOP);
+		} else {
+			musb_writel(musb->ctrl_base,
+					RNDIS_REG(cppi41_channel->port_num), 0);
+			controller->set_dma_mode(cppi41_channel,
+					EP_MODE_DMA_TRANSPARENT);
+			cppi41_set_autoreq_mode(cppi41_channel,
+					EP_MODE_AUTOREQ_NONE);
+		}
+	} else {
+		/* fallback mode */
+		controller->set_dma_mode(cppi41_channel,
+				EP_MODE_DMA_TRANSPARENT);
+		cppi41_set_autoreq_mode(cppi41_channel, EP_MODE_AUTOREQ_NONE);
+		len = min_t(u32, packet_sz, len);
+	}
+	cppi41_channel->prog_len = len;
+	direction = cppi41_channel->is_tx ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
+	dma_desc = dmaengine_prep_slave_single(dc, dma_addr, len, direction,
+			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!dma_desc)
+		return false;
+
+	dma_desc->callback_result = cppi41_dma_callback;
+	dma_desc->callback_param = channel;
+	cppi41_channel->cookie = dma_desc->tx_submit(dma_desc);
+	cppi41_channel->channel.rx_packet_done = false;
+
+	trace_musb_cppi41_config(cppi41_channel);
+
+	save_rx_toggle(cppi41_channel);
+	dma_async_issue_pending(dc);
+	return true;
+}
+
+static struct dma_channel *cppi41_dma_channel_allocate(struct dma_controller *c,
+				struct musb_hw_ep *hw_ep, u8 is_tx)
+{
+	struct cppi41_dma_controller *controller = container_of(c,
+			struct cppi41_dma_controller, controller);
+	struct cppi41_dma_channel *cppi41_channel = NULL;
+	u8 ch_num = hw_ep->epnum - 1;
+
+	if (ch_num >= controller->num_channels)
+		return NULL;
+
+	if (is_tx)
+		cppi41_channel = &controller->tx_channel[ch_num];
+	else
+		cppi41_channel = &controller->rx_channel[ch_num];
+
+	if (!cppi41_channel->dc)
+		return NULL;
+
+	if (cppi41_channel->is_allocated)
+		return NULL;
+
+	cppi41_channel->hw_ep = hw_ep;
+	cppi41_channel->is_allocated = 1;
+
+	trace_musb_cppi41_alloc(cppi41_channel);
+	return &cppi41_channel->channel;
+}
+
+static void cppi41_dma_channel_release(struct dma_channel *channel)
+{
+	struct cppi41_dma_channel *cppi41_channel = channel->private_data;
+
+	trace_musb_cppi41_free(cppi41_channel);
+	if (cppi41_channel->is_allocated) {
+		cppi41_channel->is_allocated = 0;
+		channel->status = MUSB_DMA_STATUS_FREE;
+		channel->actual_len = 0;
+	}
+}
+
+static int cppi41_dma_channel_program(struct dma_channel *channel,
+				u16 packet_sz, u8 mode,
+				dma_addr_t dma_addr, u32 len)
+{
+	int ret;
+	struct cppi41_dma_channel *cppi41_channel = channel->private_data;
+	int hb_mult = 0;
+
+	BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
+		channel->status == MUSB_DMA_STATUS_BUSY);
+
+	if (is_host_active(cppi41_channel->controller->controller.musb)) {
+		if (cppi41_channel->is_tx)
+			hb_mult = cppi41_channel->hw_ep->out_qh->hb_mult;
+		else
+			hb_mult = cppi41_channel->hw_ep->in_qh->hb_mult;
+	}
+
+	channel->status = MUSB_DMA_STATUS_BUSY;
+	channel->actual_len = 0;
+
+	if (hb_mult)
+		packet_sz = hb_mult * (packet_sz & 0x7FF);
+
+	ret = cppi41_configure_channel(channel, packet_sz, mode, dma_addr, len);
+	if (!ret)
+		channel->status = MUSB_DMA_STATUS_FREE;
+
+	return ret;
+}
+
+static int cppi41_is_compatible(struct dma_channel *channel, u16 maxpacket,
+		void *buf, u32 length)
+{
+	struct cppi41_dma_channel *cppi41_channel = channel->private_data;
+	struct cppi41_dma_controller *controller = cppi41_channel->controller;
+	struct musb *musb = controller->controller.musb;
+
+	if (is_host_active(musb)) {
+		WARN_ON(1);
+		return 1;
+	}
+	if (cppi41_channel->hw_ep->ep_in.type != USB_ENDPOINT_XFER_BULK)
+		return 0;
+	if (cppi41_channel->is_tx)
+		return 1;
+	/* AM335x Advisory 1.0.13. No workaround for device RX mode */
+	return 0;
+}
+
+static int cppi41_dma_channel_abort(struct dma_channel *channel)
+{
+	struct cppi41_dma_channel *cppi41_channel = channel->private_data;
+	struct cppi41_dma_controller *controller = cppi41_channel->controller;
+	struct musb *musb = controller->controller.musb;
+	void __iomem *epio = cppi41_channel->hw_ep->regs;
+	int tdbit;
+	int ret;
+	unsigned is_tx;
+	u16 csr;
+
+	is_tx = cppi41_channel->is_tx;
+	trace_musb_cppi41_abort(cppi41_channel);
+
+	if (cppi41_channel->channel.status == MUSB_DMA_STATUS_FREE)
+		return 0;
+
+	list_del_init(&cppi41_channel->tx_check);
+	if (is_tx) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		csr &= ~MUSB_TXCSR_DMAENAB;
+		musb_writew(epio, MUSB_TXCSR, csr);
+	} else {
+		cppi41_set_autoreq_mode(cppi41_channel, EP_MODE_AUTOREQ_NONE);
+
+		/* delay to drain to cppi dma pipeline for isoch */
+		udelay(250);
+
+		csr = musb_readw(epio, MUSB_RXCSR);
+		csr &= ~(MUSB_RXCSR_H_REQPKT | MUSB_RXCSR_DMAENAB);
+		musb_writew(epio, MUSB_RXCSR, csr);
+
+		/* wait to drain cppi dma pipe line */
+		udelay(50);
+
+		csr = musb_readw(epio, MUSB_RXCSR);
+		if (csr & MUSB_RXCSR_RXPKTRDY) {
+			csr |= MUSB_RXCSR_FLUSHFIFO;
+			musb_writew(epio, MUSB_RXCSR, csr);
+			musb_writew(epio, MUSB_RXCSR, csr);
+		}
+	}
+
+	/* DA8xx Advisory 2.3.27: wait 250 ms before to start the teardown */
+	if (musb->ops->quirks & MUSB_DA8XX)
+		mdelay(250);
+
+	tdbit = 1 << cppi41_channel->port_num;
+	if (is_tx)
+		tdbit <<= 16;
+
+	do {
+		if (is_tx)
+			musb_writel(musb->ctrl_base, controller->tdown_reg,
+				    tdbit);
+		ret = dmaengine_terminate_all(cppi41_channel->dc);
+	} while (ret == -EAGAIN);
+
+	if (is_tx) {
+		musb_writel(musb->ctrl_base, controller->tdown_reg, tdbit);
+
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_TXPKTRDY) {
+			csr |= MUSB_TXCSR_FLUSHFIFO;
+			musb_writew(epio, MUSB_TXCSR, csr);
+		}
+	}
+
+	cppi41_channel->channel.status = MUSB_DMA_STATUS_FREE;
+	return 0;
+}
+
+static void cppi41_release_all_dma_chans(struct cppi41_dma_controller *ctrl)
+{
+	struct dma_chan *dc;
+	int i;
+
+	for (i = 0; i < ctrl->num_channels; i++) {
+		dc = ctrl->tx_channel[i].dc;
+		if (dc)
+			dma_release_channel(dc);
+		dc = ctrl->rx_channel[i].dc;
+		if (dc)
+			dma_release_channel(dc);
+	}
+}
+
+static void cppi41_dma_controller_stop(struct cppi41_dma_controller *controller)
+{
+	cppi41_release_all_dma_chans(controller);
+}
+
+static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
+{
+	struct musb *musb = controller->controller.musb;
+	struct device *dev = musb->controller;
+	struct device_node *np = dev->parent->of_node;
+	struct cppi41_dma_channel *cppi41_channel;
+	int count;
+	int i;
+	int ret;
+
+	count = of_property_count_strings(np, "dma-names");
+	if (count < 0)
+		return count;
+
+	for (i = 0; i < count; i++) {
+		struct dma_chan *dc;
+		struct dma_channel *musb_dma;
+		const char *str;
+		unsigned is_tx;
+		unsigned int port;
+
+		ret = of_property_read_string_index(np, "dma-names", i, &str);
+		if (ret)
+			goto err;
+		if (strstarts(str, "tx"))
+			is_tx = 1;
+		else if (strstarts(str, "rx"))
+			is_tx = 0;
+		else {
+			dev_err(dev, "Wrong dmatype %s\n", str);
+			goto err;
+		}
+		ret = kstrtouint(str + 2, 0, &port);
+		if (ret)
+			goto err;
+
+		ret = -EINVAL;
+		if (port > controller->num_channels || !port)
+			goto err;
+		if (is_tx)
+			cppi41_channel = &controller->tx_channel[port - 1];
+		else
+			cppi41_channel = &controller->rx_channel[port - 1];
+
+		cppi41_channel->controller = controller;
+		cppi41_channel->port_num = port;
+		cppi41_channel->is_tx = is_tx;
+		INIT_LIST_HEAD(&cppi41_channel->tx_check);
+
+		musb_dma = &cppi41_channel->channel;
+		musb_dma->private_data = cppi41_channel;
+		musb_dma->status = MUSB_DMA_STATUS_FREE;
+		musb_dma->max_len = SZ_4M;
+
+		dc = dma_request_chan(dev->parent, str);
+		if (IS_ERR(dc)) {
+			ret = dev_err_probe(dev, PTR_ERR(dc),
+					    "Failed to request %s.\n", str);
+			goto err;
+		}
+
+		cppi41_channel->dc = dc;
+	}
+	return 0;
+err:
+	cppi41_release_all_dma_chans(controller);
+	return ret;
+}
+
+void cppi41_dma_controller_destroy(struct dma_controller *c)
+{
+	struct cppi41_dma_controller *controller = container_of(c,
+			struct cppi41_dma_controller, controller);
+
+	hrtimer_cancel(&controller->early_tx);
+	cppi41_dma_controller_stop(controller);
+	kfree(controller->rx_channel);
+	kfree(controller->tx_channel);
+	kfree(controller);
+}
+EXPORT_SYMBOL_GPL(cppi41_dma_controller_destroy);
+
+struct dma_controller *
+cppi41_dma_controller_create(struct musb *musb, void __iomem *base)
+{
+	struct cppi41_dma_controller *controller;
+	int channel_size;
+	int ret = 0;
+
+	if (!musb->controller->parent->of_node) {
+		dev_err(musb->controller, "Need DT for the DMA engine.\n");
+		return NULL;
+	}
+
+	controller = kzalloc(sizeof(*controller), GFP_KERNEL);
+	if (!controller)
+		goto kzalloc_fail;
+
+	hrtimer_init(&controller->early_tx, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	controller->early_tx.function = cppi41_recheck_tx_req;
+	INIT_LIST_HEAD(&controller->early_tx_list);
+
+	controller->controller.channel_alloc = cppi41_dma_channel_allocate;
+	controller->controller.channel_release = cppi41_dma_channel_release;
+	controller->controller.channel_program = cppi41_dma_channel_program;
+	controller->controller.channel_abort = cppi41_dma_channel_abort;
+	controller->controller.is_compatible = cppi41_is_compatible;
+	controller->controller.musb = musb;
+
+	if (musb->ops->quirks & MUSB_DA8XX) {
+		controller->tdown_reg = DA8XX_USB_TEARDOWN;
+		controller->autoreq_reg = DA8XX_USB_AUTOREQ;
+		controller->set_dma_mode = da8xx_set_dma_mode;
+		controller->num_channels = DA8XX_DMA_NUM_CHANNELS;
+	} else {
+		controller->tdown_reg = USB_TDOWN;
+		controller->autoreq_reg = USB_CTRL_AUTOREQ;
+		controller->set_dma_mode = cppi41_set_dma_mode;
+		controller->num_channels = MUSB_DMA_NUM_CHANNELS;
+	}
+
+	channel_size = controller->num_channels *
+			sizeof(struct cppi41_dma_channel);
+	controller->rx_channel = kzalloc(channel_size, GFP_KERNEL);
+	if (!controller->rx_channel)
+		goto rx_channel_alloc_fail;
+	controller->tx_channel = kzalloc(channel_size, GFP_KERNEL);
+	if (!controller->tx_channel)
+		goto tx_channel_alloc_fail;
+
+	ret = cppi41_dma_controller_start(controller);
+	if (ret)
+		goto plat_get_fail;
+	return &controller->controller;
+
+plat_get_fail:
+	kfree(controller->tx_channel);
+tx_channel_alloc_fail:
+	kfree(controller->rx_channel);
+rx_channel_alloc_fail:
+	kfree(controller);
+kzalloc_fail:
+	if (ret == -EPROBE_DEFER)
+		return ERR_PTR(ret);
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(cppi41_dma_controller_create);
diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h
new file mode 100644
index 000000000..e5b3506c7
--- /dev/null
+++ b/drivers/usb/musb/musb_debug.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * MUSB OTG driver debug defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ */
+
+#ifndef __MUSB_LINUX_DEBUG_H__
+#define __MUSB_LINUX_DEBUG_H__
+
+#define yprintk(facility, format, args...) \
+	do { printk(facility "%s %d: " format , \
+	__func__, __LINE__ , ## args); } while (0)
+#define WARNING(fmt, args...) yprintk(KERN_WARNING, fmt, ## args)
+#define INFO(fmt, args...) yprintk(KERN_INFO, fmt, ## args)
+#define ERR(fmt, args...) yprintk(KERN_ERR, fmt, ## args)
+
+void musb_dbg(struct musb *musb, const char *fmt, ...);
+
+#ifdef CONFIG_DEBUG_FS
+void musb_init_debugfs(struct musb *musb);
+void musb_exit_debugfs(struct musb *musb);
+#else
+static inline void musb_init_debugfs(struct musb *musb)
+{
+}
+static inline void musb_exit_debugfs(struct musb *musb)
+{
+}
+#endif
+
+#endif				/*  __MUSB_LINUX_DEBUG_H__ */
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
new file mode 100644
index 000000000..5401ae668
--- /dev/null
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MUSB OTG driver debugfs support
+ *
+ * Copyright 2010 Nokia Corporation
+ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include <linux/uaccess.h>
+
+#include "musb_core.h"
+#include "musb_debug.h"
+
+struct musb_register_map {
+	char			*name;
+	unsigned		offset;
+	unsigned		size;
+};
+
+static const struct musb_register_map musb_regmap[] = {
+	{ "FAddr",	MUSB_FADDR,	8 },
+	{ "Power",	MUSB_POWER,	8 },
+	{ "Frame",	MUSB_FRAME,	16 },
+	{ "Index",	MUSB_INDEX,	8 },
+	{ "Testmode",	MUSB_TESTMODE,	8 },
+	{ "TxMaxPp",	MUSB_TXMAXP,	16 },
+	{ "TxCSRp",	MUSB_TXCSR,	16 },
+	{ "RxMaxPp",	MUSB_RXMAXP,	16 },
+	{ "RxCSR",	MUSB_RXCSR,	16 },
+	{ "RxCount",	MUSB_RXCOUNT,	16 },
+	{ "IntrRxE",	MUSB_INTRRXE,	16 },
+	{ "IntrTxE",	MUSB_INTRTXE,	16 },
+	{ "IntrUsbE",	MUSB_INTRUSBE,	8 },
+	{ "DevCtl",	MUSB_DEVCTL,	8 },
+	{ "VControl",	0x68,		32 },
+	{ "HWVers",	MUSB_HWVERS,	16 },
+	{ "LinkInfo",	MUSB_LINKINFO,	8 },
+	{ "VPLen",	MUSB_VPLEN,	8 },
+	{ "HS_EOF1",	MUSB_HS_EOF1,	8 },
+	{ "FS_EOF1",	MUSB_FS_EOF1,	8 },
+	{ "LS_EOF1",	MUSB_LS_EOF1,	8 },
+	{ "SOFT_RST",	0x7F,		8 },
+	{ "DMA_CNTLch0",	0x204,	16 },
+	{ "DMA_ADDRch0",	0x208,	32 },
+	{ "DMA_COUNTch0",	0x20C,	32 },
+	{ "DMA_CNTLch1",	0x214,	16 },
+	{ "DMA_ADDRch1",	0x218,	32 },
+	{ "DMA_COUNTch1",	0x21C,	32 },
+	{ "DMA_CNTLch2",	0x224,	16 },
+	{ "DMA_ADDRch2",	0x228,	32 },
+	{ "DMA_COUNTch2",	0x22C,	32 },
+	{ "DMA_CNTLch3",	0x234,	16 },
+	{ "DMA_ADDRch3",	0x238,	32 },
+	{ "DMA_COUNTch3",	0x23C,	32 },
+	{ "DMA_CNTLch4",	0x244,	16 },
+	{ "DMA_ADDRch4",	0x248,	32 },
+	{ "DMA_COUNTch4",	0x24C,	32 },
+	{ "DMA_CNTLch5",	0x254,	16 },
+	{ "DMA_ADDRch5",	0x258,	32 },
+	{ "DMA_COUNTch5",	0x25C,	32 },
+	{ "DMA_CNTLch6",	0x264,	16 },
+	{ "DMA_ADDRch6",	0x268,	32 },
+	{ "DMA_COUNTch6",	0x26C,	32 },
+	{ "DMA_CNTLch7",	0x274,	16 },
+	{ "DMA_ADDRch7",	0x278,	32 },
+	{ "DMA_COUNTch7",	0x27C,	32 },
+	{ "ConfigData",	MUSB_CONFIGDATA,8 },
+	{ "BabbleCtl",	MUSB_BABBLE_CTL,8 },
+	{ "TxFIFOsz",	MUSB_TXFIFOSZ,	8 },
+	{ "RxFIFOsz",	MUSB_RXFIFOSZ,	8 },
+	{ "TxFIFOadd",	MUSB_TXFIFOADD,	16 },
+	{ "RxFIFOadd",	MUSB_RXFIFOADD,	16 },
+	{ "EPInfo",	MUSB_EPINFO,	8 },
+	{ "RAMInfo",	MUSB_RAMINFO,	8 },
+	{  }	/* Terminating Entry */
+};
+
+static int musb_regdump_show(struct seq_file *s, void *unused)
+{
+	struct musb		*musb = s->private;
+	unsigned		i;
+
+	seq_printf(s, "MUSB (M)HDRC Register Dump\n");
+	pm_runtime_get_sync(musb->controller);
+
+	for (i = 0; i < ARRAY_SIZE(musb_regmap); i++) {
+		switch (musb_regmap[i].size) {
+		case 8:
+			seq_printf(s, "%-12s: %02x\n", musb_regmap[i].name,
+					musb_readb(musb->mregs, musb_regmap[i].offset));
+			break;
+		case 16:
+			seq_printf(s, "%-12s: %04x\n", musb_regmap[i].name,
+					musb_readw(musb->mregs, musb_regmap[i].offset));
+			break;
+		case 32:
+			seq_printf(s, "%-12s: %08x\n", musb_regmap[i].name,
+					musb_readl(musb->mregs, musb_regmap[i].offset));
+			break;
+		}
+	}
+
+	pm_runtime_mark_last_busy(musb->controller);
+	pm_runtime_put_autosuspend(musb->controller);
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(musb_regdump);
+
+static int musb_test_mode_show(struct seq_file *s, void *unused)
+{
+	struct musb		*musb = s->private;
+	unsigned		test;
+
+	pm_runtime_get_sync(musb->controller);
+	test = musb_readb(musb->mregs, MUSB_TESTMODE);
+	pm_runtime_mark_last_busy(musb->controller);
+	pm_runtime_put_autosuspend(musb->controller);
+
+	if (test == (MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_FS))
+		seq_printf(s, "force host full-speed\n");
+
+	else if (test == (MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_HS))
+		seq_printf(s, "force host high-speed\n");
+
+	else if (test == MUSB_TEST_FORCE_HOST)
+		seq_printf(s, "force host\n");
+
+	else if (test == MUSB_TEST_FIFO_ACCESS)
+		seq_printf(s, "fifo access\n");
+
+	else if (test == MUSB_TEST_FORCE_FS)
+		seq_printf(s, "force full-speed\n");
+
+	else if (test == MUSB_TEST_FORCE_HS)
+		seq_printf(s, "force high-speed\n");
+
+	else if (test == MUSB_TEST_PACKET)
+		seq_printf(s, "test packet\n");
+
+	else if (test == MUSB_TEST_K)
+		seq_printf(s, "test K\n");
+
+	else if (test == MUSB_TEST_J)
+		seq_printf(s, "test J\n");
+
+	else if (test == MUSB_TEST_SE0_NAK)
+		seq_printf(s, "test SE0 NAK\n");
+
+	return 0;
+}
+
+static int musb_test_mode_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, musb_test_mode_show, inode->i_private);
+}
+
+static ssize_t musb_test_mode_write(struct file *file,
+		const char __user *ubuf, size_t count, loff_t *ppos)
+{
+	struct seq_file		*s = file->private_data;
+	struct musb		*musb = s->private;
+	u8			test;
+	char			buf[24];
+
+	memset(buf, 0x00, sizeof(buf));
+
+	if (copy_from_user(buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	pm_runtime_get_sync(musb->controller);
+	test = musb_readb(musb->mregs, MUSB_TESTMODE);
+	if (test) {
+		dev_err(musb->controller, "Error: test mode is already set. "
+			"Please do USB Bus Reset to start a new test.\n");
+		goto ret;
+	}
+
+	if (strstarts(buf, "force host full-speed"))
+		test = MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_FS;
+
+	else if (strstarts(buf, "force host high-speed"))
+		test = MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_HS;
+
+	else if (strstarts(buf, "force host"))
+		test = MUSB_TEST_FORCE_HOST;
+
+	else if (strstarts(buf, "fifo access"))
+		test = MUSB_TEST_FIFO_ACCESS;
+
+	else if (strstarts(buf, "force full-speed"))
+		test = MUSB_TEST_FORCE_FS;
+
+	else if (strstarts(buf, "force high-speed"))
+		test = MUSB_TEST_FORCE_HS;
+
+	else if (strstarts(buf, "test packet")) {
+		test = MUSB_TEST_PACKET;
+		musb_load_testpacket(musb);
+	}
+
+	else if (strstarts(buf, "test K"))
+		test = MUSB_TEST_K;
+
+	else if (strstarts(buf, "test J"))
+		test = MUSB_TEST_J;
+
+	else if (strstarts(buf, "test SE0 NAK"))
+		test = MUSB_TEST_SE0_NAK;
+
+	musb_writeb(musb->mregs, MUSB_TESTMODE, test);
+
+ret:
+	pm_runtime_mark_last_busy(musb->controller);
+	pm_runtime_put_autosuspend(musb->controller);
+	return count;
+}
+
+static const struct file_operations musb_test_mode_fops = {
+	.open			= musb_test_mode_open,
+	.write			= musb_test_mode_write,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
+static int musb_softconnect_show(struct seq_file *s, void *unused)
+{
+	struct musb	*musb = s->private;
+	u8		reg;
+	int		connect;
+
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_A_HOST:
+	case OTG_STATE_A_WAIT_BCON:
+		pm_runtime_get_sync(musb->controller);
+
+		reg = musb_readb(musb->mregs, MUSB_DEVCTL);
+		connect = reg & MUSB_DEVCTL_SESSION ? 1 : 0;
+
+		pm_runtime_mark_last_busy(musb->controller);
+		pm_runtime_put_autosuspend(musb->controller);
+		break;
+	default:
+		connect = -1;
+	}
+
+	seq_printf(s, "%d\n", connect);
+
+	return 0;
+}
+
+static int musb_softconnect_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, musb_softconnect_show, inode->i_private);
+}
+
+static ssize_t musb_softconnect_write(struct file *file,
+		const char __user *ubuf, size_t count, loff_t *ppos)
+{
+	struct seq_file		*s = file->private_data;
+	struct musb		*musb = s->private;
+	char			buf[2];
+	u8			reg;
+
+	memset(buf, 0x00, sizeof(buf));
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	pm_runtime_get_sync(musb->controller);
+	if (!strncmp(buf, "0", 1)) {
+		switch (musb->xceiv->otg->state) {
+		case OTG_STATE_A_HOST:
+			musb_root_disconnect(musb);
+			reg = musb_readb(musb->mregs, MUSB_DEVCTL);
+			reg &= ~MUSB_DEVCTL_SESSION;
+			musb_writeb(musb->mregs, MUSB_DEVCTL, reg);
+			break;
+		default:
+			break;
+		}
+	} else if (!strncmp(buf, "1", 1)) {
+		switch (musb->xceiv->otg->state) {
+		case OTG_STATE_A_WAIT_BCON:
+			/*
+			 * musb_save_context() called in musb_runtime_suspend()
+			 * might cache devctl with SESSION bit cleared during
+			 * soft-disconnect, so specifically set SESSION bit
+			 * here to preserve it for musb_runtime_resume().
+			 */
+			musb->context.devctl |= MUSB_DEVCTL_SESSION;
+			reg = musb_readb(musb->mregs, MUSB_DEVCTL);
+			reg |= MUSB_DEVCTL_SESSION;
+			musb_writeb(musb->mregs, MUSB_DEVCTL, reg);
+			break;
+		default:
+			break;
+		}
+	}
+
+	pm_runtime_mark_last_busy(musb->controller);
+	pm_runtime_put_autosuspend(musb->controller);
+	return count;
+}
+
+/*
+ * In host mode, connect/disconnect the bus without physically
+ * remove the devices.
+ */
+static const struct file_operations musb_softconnect_fops = {
+	.open			= musb_softconnect_open,
+	.write			= musb_softconnect_write,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
+void musb_init_debugfs(struct musb *musb)
+{
+	struct dentry *root;
+
+	root = debugfs_create_dir(dev_name(musb->controller), usb_debug_root);
+	musb->debugfs_root = root;
+
+	debugfs_create_file("regdump", S_IRUGO, root, musb, &musb_regdump_fops);
+	debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, musb,
+			    &musb_test_mode_fops);
+	debugfs_create_file("softconnect", S_IRUGO | S_IWUSR, root, musb,
+			    &musb_softconnect_fops);
+}
+
+void /* __init_or_exit */ musb_exit_debugfs(struct musb *musb)
+{
+	debugfs_remove_recursive(musb->debugfs_root);
+}
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
new file mode 100644
index 000000000..7d67b69df
--- /dev/null
+++ b/drivers/usb/musb/musb_dma.h
@@ -0,0 +1,220 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * MUSB OTG driver DMA controller abstraction
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ */
+
+#ifndef __MUSB_DMA_H__
+#define __MUSB_DMA_H__
+
+struct musb_hw_ep;
+
+/*
+ * DMA Controller Abstraction
+ *
+ * DMA Controllers are abstracted to allow use of a variety of different
+ * implementations of DMA, as allowed by the Inventra USB cores.  On the
+ * host side, usbcore sets up the DMA mappings and flushes caches; on the
+ * peripheral side, the gadget controller driver does.  Responsibilities
+ * of a DMA controller driver include:
+ *
+ *  - Handling the details of moving multiple USB packets
+ *    in cooperation with the Inventra USB core, including especially
+ *    the correct RX side treatment of short packets and buffer-full
+ *    states (both of which terminate transfers).
+ *
+ *  - Knowing the correlation between dma channels and the
+ *    Inventra core's local endpoint resources and data direction.
+ *
+ *  - Maintaining a list of allocated/available channels.
+ *
+ *  - Updating channel status on interrupts,
+ *    whether shared with the Inventra core or separate.
+ */
+
+#define MUSB_HSDMA_BASE		0x200
+#define MUSB_HSDMA_INTR		(MUSB_HSDMA_BASE + 0)
+#define MUSB_HSDMA_CONTROL	0x4
+#define MUSB_HSDMA_ADDRESS	0x8
+#define MUSB_HSDMA_COUNT	0xc
+
+#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+#ifdef CONFIG_MUSB_PIO_ONLY
+#define	is_dma_capable()	(0)
+#else
+#define	is_dma_capable()	(1)
+#endif
+
+#ifdef CONFIG_USB_UX500_DMA
+#define musb_dma_ux500(musb)		(musb->ops->quirks & MUSB_DMA_UX500)
+#else
+#define musb_dma_ux500(musb)		0
+#endif
+
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+#define musb_dma_cppi41(musb)		(musb->ops->quirks & MUSB_DMA_CPPI41)
+#else
+#define musb_dma_cppi41(musb)		0
+#endif
+
+#ifdef CONFIG_USB_TI_CPPI_DMA
+#define musb_dma_cppi(musb)		(musb->ops->quirks & MUSB_DMA_CPPI)
+#else
+#define musb_dma_cppi(musb)		0
+#endif
+
+#ifdef CONFIG_USB_TUSB_OMAP_DMA
+#define tusb_dma_omap(musb)		(musb->ops->quirks & MUSB_DMA_TUSB_OMAP)
+#else
+#define tusb_dma_omap(musb)		0
+#endif
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+#define musb_dma_inventra(musb)		(musb->ops->quirks & MUSB_DMA_INVENTRA)
+#else
+#define musb_dma_inventra(musb)		0
+#endif
+
+#if defined(CONFIG_USB_TI_CPPI_DMA) || defined(CONFIG_USB_TI_CPPI41_DMA)
+#define	is_cppi_enabled(musb)		\
+	(musb_dma_cppi(musb) || musb_dma_cppi41(musb))
+#else
+#define	is_cppi_enabled(musb)	0
+#endif
+
+/*
+ * DMA channel status ... updated by the dma controller driver whenever that
+ * status changes, and protected by the overall controller spinlock.
+ */
+enum dma_channel_status {
+	/* unallocated */
+	MUSB_DMA_STATUS_UNKNOWN,
+	/* allocated ... but not busy, no errors */
+	MUSB_DMA_STATUS_FREE,
+	/* busy ... transactions are active */
+	MUSB_DMA_STATUS_BUSY,
+	/* transaction(s) aborted due to ... dma or memory bus error */
+	MUSB_DMA_STATUS_BUS_ABORT,
+	/* transaction(s) aborted due to ... core error or USB fault */
+	MUSB_DMA_STATUS_CORE_ABORT
+};
+
+struct dma_controller;
+
+/**
+ * struct dma_channel - A DMA channel.
+ * @private_data: channel-private data
+ * @max_len: the maximum number of bytes the channel can move in one
+ *	transaction (typically representing many USB maximum-sized packets)
+ * @actual_len: how many bytes have been transferred
+ * @status: current channel status (updated e.g. on interrupt)
+ * @desired_mode: true if mode 1 is desired; false if mode 0 is desired
+ *
+ * channels are associated with an endpoint for the duration of at least
+ * one usb transfer.
+ */
+struct dma_channel {
+	void			*private_data;
+	/* FIXME not void* private_data, but a dma_controller * */
+	size_t			max_len;
+	size_t			actual_len;
+	enum dma_channel_status	status;
+	bool			desired_mode;
+	bool			rx_packet_done;
+};
+
+/*
+ * dma_channel_status - return status of dma channel
+ * @c: the channel
+ *
+ * Returns the software's view of the channel status.  If that status is BUSY
+ * then it's possible that the hardware has completed (or aborted) a transfer,
+ * so the driver needs to update that status.
+ */
+static inline enum dma_channel_status
+dma_channel_status(struct dma_channel *c)
+{
+	return (is_dma_capable() && c) ? c->status : MUSB_DMA_STATUS_UNKNOWN;
+}
+
+/**
+ * struct dma_controller - A DMA Controller.
+ * @musb: the usb controller
+ * @start: call this to start a DMA controller;
+ *	return 0 on success, else negative errno
+ * @stop: call this to stop a DMA controller
+ *	return 0 on success, else negative errno
+ * @channel_alloc: call this to allocate a DMA channel
+ * @channel_release: call this to release a DMA channel
+ * @channel_abort: call this to abort a pending DMA transaction,
+ *	returning it to FREE (but allocated) state
+ * @dma_callback: invoked on DMA completion, useful to run platform
+ *	code such IRQ acknowledgment.
+ *
+ * Controllers manage dma channels.
+ */
+struct dma_controller {
+	struct musb *musb;
+	struct dma_channel	*(*channel_alloc)(struct dma_controller *,
+					struct musb_hw_ep *, u8 is_tx);
+	void			(*channel_release)(struct dma_channel *);
+	int			(*channel_program)(struct dma_channel *channel,
+							u16 maxpacket, u8 mode,
+							dma_addr_t dma_addr,
+							u32 length);
+	int			(*channel_abort)(struct dma_channel *);
+	int			(*is_compatible)(struct dma_channel *channel,
+							u16 maxpacket,
+							void *buf, u32 length);
+	void			(*dma_callback)(struct dma_controller *);
+};
+
+/* called after channel_program(), may indicate a fault */
+extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit);
+
+#ifdef CONFIG_MUSB_PIO_ONLY
+static inline struct dma_controller *
+musb_dma_controller_create(struct musb *m, void __iomem *io)
+{
+	return NULL;
+}
+
+static inline void musb_dma_controller_destroy(struct dma_controller *d) { }
+
+#else
+
+extern struct dma_controller *
+(*musb_dma_controller_create)(struct musb *, void __iomem *);
+
+extern void (*musb_dma_controller_destroy)(struct dma_controller *);
+#endif
+
+/* Platform specific DMA functions */
+extern struct dma_controller *
+musbhs_dma_controller_create(struct musb *musb, void __iomem *base);
+extern void musbhs_dma_controller_destroy(struct dma_controller *c);
+extern struct dma_controller *
+musbhs_dma_controller_create_noirq(struct musb *musb, void __iomem *base);
+extern irqreturn_t dma_controller_irq(int irq, void *private_data);
+
+extern struct dma_controller *
+tusb_dma_controller_create(struct musb *musb, void __iomem *base);
+extern void tusb_dma_controller_destroy(struct dma_controller *c);
+
+extern struct dma_controller *
+cppi_dma_controller_create(struct musb *musb, void __iomem *base);
+extern void cppi_dma_controller_destroy(struct dma_controller *c);
+
+extern struct dma_controller *
+cppi41_dma_controller_create(struct musb *musb, void __iomem *base);
+extern void cppi41_dma_controller_destroy(struct dma_controller *c);
+
+extern struct dma_controller *
+ux500_dma_controller_create(struct musb *musb, void __iomem *base);
+extern void ux500_dma_controller_destroy(struct dma_controller *c);
+
+#endif	/* __MUSB_DMA_H__ */
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
new file mode 100644
index 000000000..f75cde0f2
--- /dev/null
+++ b/drivers/usb/musb/musb_dsps.c
@@ -0,0 +1,1052 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Texas Instruments DSPS platforms "glue layer"
+ *
+ * Copyright (C) 2012, by Texas Instruments
+ *
+ * Based on the am35x "glue layer" code.
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * musb_dsps.c will be a common file for all the TI DSPS platforms
+ * such as dm64x, dm36x, dm35x, da8x, am35x and ti81x.
+ * For now only ti81x is using this and in future davinci.c, am35x.c
+ * da8xx.c would be merged to this file after testing.
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/pm_runtime.h>
+#include <linux/module.h>
+#include <linux/usb/usb_phy_generic.h>
+#include <linux/platform_data/usb-omap.h>
+#include <linux/sizes.h>
+
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/usb/of.h>
+
+#include <linux/debugfs.h>
+
+#include "musb_core.h"
+
+static const struct of_device_id musb_dsps_of_match[];
+
+/*
+ * DSPS musb wrapper register offset.
+ * FIXME: This should be expanded to have all the wrapper registers from TI DSPS
+ * musb ips.
+ */
+struct dsps_musb_wrapper {
+	u16	revision;
+	u16	control;
+	u16	status;
+	u16	epintr_set;
+	u16	epintr_clear;
+	u16	epintr_status;
+	u16	coreintr_set;
+	u16	coreintr_clear;
+	u16	coreintr_status;
+	u16	phy_utmi;
+	u16	mode;
+	u16	tx_mode;
+	u16	rx_mode;
+
+	/* bit positions for control */
+	unsigned	reset:5;
+
+	/* bit positions for interrupt */
+	unsigned	usb_shift:5;
+	u32		usb_mask;
+	u32		usb_bitmap;
+	unsigned	drvvbus:5;
+
+	unsigned	txep_shift:5;
+	u32		txep_mask;
+	u32		txep_bitmap;
+
+	unsigned	rxep_shift:5;
+	u32		rxep_mask;
+	u32		rxep_bitmap;
+
+	/* bit positions for phy_utmi */
+	unsigned	otg_disable:5;
+
+	/* bit positions for mode */
+	unsigned	iddig:5;
+	unsigned	iddig_mux:5;
+	/* miscellaneous stuff */
+	unsigned	poll_timeout;
+};
+
+/*
+ * register shadow for suspend
+ */
+struct dsps_context {
+	u32 control;
+	u32 epintr;
+	u32 coreintr;
+	u32 phy_utmi;
+	u32 mode;
+	u32 tx_mode;
+	u32 rx_mode;
+};
+
+/*
+ * DSPS glue structure.
+ */
+struct dsps_glue {
+	struct device *dev;
+	struct platform_device *musb;	/* child musb pdev */
+	const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
+	int vbus_irq;			/* optional vbus irq */
+	unsigned long last_timer;    /* last timer data for each instance */
+	bool sw_babble_enabled;
+	void __iomem *usbss_base;
+
+	struct dsps_context context;
+	struct debugfs_regset32 regset;
+	struct dentry *dbgfs_root;
+};
+
+static const struct debugfs_reg32 dsps_musb_regs[] = {
+	{ "revision",		0x00 },
+	{ "control",		0x14 },
+	{ "status",		0x18 },
+	{ "eoi",		0x24 },
+	{ "intr0_stat",		0x30 },
+	{ "intr1_stat",		0x34 },
+	{ "intr0_set",		0x38 },
+	{ "intr1_set",		0x3c },
+	{ "txmode",		0x70 },
+	{ "rxmode",		0x74 },
+	{ "autoreq",		0xd0 },
+	{ "srpfixtime",		0xd4 },
+	{ "tdown",		0xd8 },
+	{ "phy_utmi",		0xe0 },
+	{ "mode",		0xe8 },
+};
+
+static void dsps_mod_timer(struct dsps_glue *glue, int wait_ms)
+{
+	struct musb *musb = platform_get_drvdata(glue->musb);
+	int wait;
+
+	if (wait_ms < 0)
+		wait = msecs_to_jiffies(glue->wrp->poll_timeout);
+	else
+		wait = msecs_to_jiffies(wait_ms);
+
+	mod_timer(&musb->dev_timer, jiffies + wait);
+}
+
+/*
+ * If no vbus irq from the PMIC is configured, we need to poll VBUS status.
+ */
+static void dsps_mod_timer_optional(struct dsps_glue *glue)
+{
+	if (glue->vbus_irq)
+		return;
+
+	dsps_mod_timer(glue, -1);
+}
+
+/* USBSS  / USB AM335x */
+#define USBSS_IRQ_STATUS	0x28
+#define USBSS_IRQ_ENABLER	0x2c
+#define USBSS_IRQ_CLEARR	0x30
+
+#define USBSS_IRQ_PD_COMP	(1 << 2)
+
+/*
+ * dsps_musb_enable - enable interrupts
+ */
+static void dsps_musb_enable(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	void __iomem *reg_base = musb->ctrl_base;
+	u32 epmask, coremask;
+
+	/* Workaround: setup IRQs through both register sets. */
+	epmask = ((musb->epmask & wrp->txep_mask) << wrp->txep_shift) |
+	       ((musb->epmask & wrp->rxep_mask) << wrp->rxep_shift);
+	coremask = (wrp->usb_bitmap & ~MUSB_INTR_SOF);
+
+	musb_writel(reg_base, wrp->epintr_set, epmask);
+	musb_writel(reg_base, wrp->coreintr_set, coremask);
+	/*
+	 * start polling for runtime PM active and idle,
+	 * and for ID change in dual-role idle mode.
+	 */
+	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
+		dsps_mod_timer(glue, -1);
+}
+
+/*
+ * dsps_musb_disable - disable HDRC and flush interrupts
+ */
+static void dsps_musb_disable(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	void __iomem *reg_base = musb->ctrl_base;
+
+	musb_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
+	musb_writel(reg_base, wrp->epintr_clear,
+			 wrp->txep_bitmap | wrp->rxep_bitmap);
+	del_timer_sync(&musb->dev_timer);
+}
+
+/* Caller must take musb->lock */
+static int dsps_check_status(struct musb *musb, void *unused)
+{
+	void __iomem *mregs = musb->mregs;
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	u8 devctl;
+	int skip_session = 0;
+
+	if (glue->vbus_irq)
+		del_timer(&musb->dev_timer);
+
+	/*
+	 * We poll because DSPS IP's won't expose several OTG-critical
+	 * status change events (from the transceiver) otherwise.
+	 */
+	devctl = musb_readb(mregs, MUSB_DEVCTL);
+	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
+				usb_otg_state_string(musb->xceiv->otg->state));
+
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_A_WAIT_VRISE:
+		if (musb->port_mode == MUSB_HOST) {
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
+			dsps_mod_timer_optional(glue);
+			break;
+		}
+		fallthrough;
+
+	case OTG_STATE_A_WAIT_BCON:
+		/* keep VBUS on for host-only mode */
+		if (musb->port_mode == MUSB_HOST) {
+			dsps_mod_timer_optional(glue);
+			break;
+		}
+		musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+		skip_session = 1;
+		fallthrough;
+
+	case OTG_STATE_A_IDLE:
+	case OTG_STATE_B_IDLE:
+		if (!glue->vbus_irq) {
+			if (devctl & MUSB_DEVCTL_BDEVICE) {
+				musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+				MUSB_DEV_MODE(musb);
+			} else {
+				musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+				MUSB_HST_MODE(musb);
+			}
+
+			if (musb->port_mode == MUSB_PERIPHERAL)
+				skip_session = 1;
+
+			if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
+				musb_writeb(mregs, MUSB_DEVCTL,
+					    MUSB_DEVCTL_SESSION);
+		}
+		dsps_mod_timer_optional(glue);
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+		musb_writel(musb->ctrl_base, wrp->coreintr_set,
+			    MUSB_INTR_VBUSERROR << wrp->usb_shift);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static void otg_timer(struct timer_list *t)
+{
+	struct musb *musb = from_timer(musb, t, dev_timer);
+	struct device *dev = musb->controller;
+	unsigned long flags;
+	int err;
+
+	err = pm_runtime_get(dev);
+	if ((err != -EINPROGRESS) && err < 0) {
+		dev_err(dev, "Poll could not pm_runtime_get: %i\n", err);
+		pm_runtime_put_noidle(dev);
+
+		return;
+	}
+
+	spin_lock_irqsave(&musb->lock, flags);
+	err = musb_queue_resume_work(musb, dsps_check_status, NULL);
+	if (err < 0)
+		dev_err(dev, "%s resume work: %i\n", __func__, err);
+	spin_unlock_irqrestore(&musb->lock, flags);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+}
+
+static void dsps_musb_clear_ep_rxintr(struct musb *musb, int epnum)
+{
+	u32 epintr;
+	struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+
+	/* musb->lock might already been held */
+	epintr = (1 << epnum) << wrp->rxep_shift;
+	musb_writel(musb->ctrl_base, wrp->epintr_status, epintr);
+}
+
+static irqreturn_t dsps_interrupt(int irq, void *hci)
+{
+	struct musb  *musb = hci;
+	void __iomem *reg_base = musb->ctrl_base;
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	unsigned long flags;
+	irqreturn_t ret = IRQ_NONE;
+	u32 epintr, usbintr;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/* Get endpoint interrupts */
+	epintr = musb_readl(reg_base, wrp->epintr_status);
+	musb->int_rx = (epintr & wrp->rxep_bitmap) >> wrp->rxep_shift;
+	musb->int_tx = (epintr & wrp->txep_bitmap) >> wrp->txep_shift;
+
+	if (epintr)
+		musb_writel(reg_base, wrp->epintr_status, epintr);
+
+	/* Get usb core interrupts */
+	usbintr = musb_readl(reg_base, wrp->coreintr_status);
+	if (!usbintr && !epintr)
+		goto out;
+
+	musb->int_usb =	(usbintr & wrp->usb_bitmap) >> wrp->usb_shift;
+	if (usbintr)
+		musb_writel(reg_base, wrp->coreintr_status, usbintr);
+
+	dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n",
+			usbintr, epintr);
+
+	if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
+		int drvvbus = musb_readl(reg_base, wrp->status);
+		void __iomem *mregs = musb->mregs;
+		u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
+		int err;
+
+		err = musb->int_usb & MUSB_INTR_VBUSERROR;
+		if (err) {
+			/*
+			 * The Mentor core doesn't debounce VBUS as needed
+			 * to cope with device connect current spikes. This
+			 * means it's not uncommon for bus-powered devices
+			 * to get VBUS errors during enumeration.
+			 *
+			 * This is a workaround, but newer RTL from Mentor
+			 * seems to allow a better one: "re"-starting sessions
+			 * without waiting for VBUS to stop registering in
+			 * devctl.
+			 */
+			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
+			dsps_mod_timer_optional(glue);
+			WARNING("VBUS error workaround (delay coming)\n");
+		} else if (drvvbus) {
+			MUSB_HST_MODE(musb);
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+			dsps_mod_timer_optional(glue);
+		} else {
+			musb->is_active = 0;
+			MUSB_DEV_MODE(musb);
+			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+		}
+
+		/* NOTE: this must complete power-on within 100 ms. */
+		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
+				drvvbus ? "on" : "off",
+				usb_otg_state_string(musb->xceiv->otg->state),
+				err ? " ERROR" : "",
+				devctl);
+		ret = IRQ_HANDLED;
+	}
+
+	if (musb->int_tx || musb->int_rx || musb->int_usb)
+		ret |= musb_interrupt(musb);
+
+	/* Poll for ID change and connect */
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_B_IDLE:
+	case OTG_STATE_A_WAIT_BCON:
+		dsps_mod_timer_optional(glue);
+		break;
+	default:
+		break;
+	}
+
+out:
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return ret;
+}
+
+static int dsps_musb_dbg_init(struct musb *musb, struct dsps_glue *glue)
+{
+	struct dentry *root;
+	char buf[128];
+
+	sprintf(buf, "%s.dsps", dev_name(musb->controller));
+	root = debugfs_create_dir(buf, usb_debug_root);
+	glue->dbgfs_root = root;
+
+	glue->regset.regs = dsps_musb_regs;
+	glue->regset.nregs = ARRAY_SIZE(dsps_musb_regs);
+	glue->regset.base = musb->ctrl_base;
+
+	debugfs_create_regset32("regdump", S_IRUGO, root, &glue->regset);
+	return 0;
+}
+
+static int dsps_musb_init(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+	struct platform_device *parent = to_platform_device(dev->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	void __iomem *reg_base;
+	struct resource *r;
+	u32 rev, val;
+	int ret;
+
+	r = platform_get_resource_byname(parent, IORESOURCE_MEM, "control");
+	reg_base = devm_ioremap_resource(dev, r);
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
+	musb->ctrl_base = reg_base;
+
+	/* NOP driver needs change if supporting dual instance */
+	musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "phys", 0);
+	if (IS_ERR(musb->xceiv))
+		return PTR_ERR(musb->xceiv);
+
+	musb->phy = devm_phy_get(dev->parent, "usb2-phy");
+
+	/* Returns zero if e.g. not clocked */
+	rev = musb_readl(reg_base, wrp->revision);
+	if (!rev)
+		return -ENODEV;
+
+	if (IS_ERR(musb->phy))  {
+		musb->phy = NULL;
+	} else {
+		ret = phy_init(musb->phy);
+		if (ret < 0)
+			return ret;
+		ret = phy_power_on(musb->phy);
+		if (ret) {
+			phy_exit(musb->phy);
+			return ret;
+		}
+	}
+
+	timer_setup(&musb->dev_timer, otg_timer, 0);
+
+	/* Reset the musb */
+	musb_writel(reg_base, wrp->control, (1 << wrp->reset));
+
+	musb->isr = dsps_interrupt;
+
+	/* reset the otgdisable bit, needed for host mode to work */
+	val = musb_readl(reg_base, wrp->phy_utmi);
+	val &= ~(1 << wrp->otg_disable);
+	musb_writel(musb->ctrl_base, wrp->phy_utmi, val);
+
+	/*
+	 *  Check whether the dsps version has babble control enabled.
+	 * In latest silicon revision the babble control logic is enabled.
+	 * If MUSB_BABBLE_CTL returns 0x4 then we have the babble control
+	 * logic enabled.
+	 */
+	val = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
+	if (val & MUSB_BABBLE_RCV_DISABLE) {
+		glue->sw_babble_enabled = true;
+		val |= MUSB_BABBLE_SW_SESSION_CTRL;
+		musb_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
+	}
+
+	dsps_mod_timer(glue, -1);
+
+	return dsps_musb_dbg_init(musb, glue);
+}
+
+static int dsps_musb_exit(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+
+	del_timer_sync(&musb->dev_timer);
+	phy_power_off(musb->phy);
+	phy_exit(musb->phy);
+	debugfs_remove_recursive(glue->dbgfs_root);
+
+	return 0;
+}
+
+static int dsps_musb_set_mode(struct musb *musb, u8 mode)
+{
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	void __iomem *ctrl_base = musb->ctrl_base;
+	u32 reg;
+
+	reg = musb_readl(ctrl_base, wrp->mode);
+
+	switch (mode) {
+	case MUSB_HOST:
+		reg &= ~(1 << wrp->iddig);
+
+		/*
+		 * if we're setting mode to host-only or device-only, we're
+		 * going to ignore whatever the PHY sends us and just force
+		 * ID pin status by SW
+		 */
+		reg |= (1 << wrp->iddig_mux);
+
+		musb_writel(ctrl_base, wrp->mode, reg);
+		musb_writel(ctrl_base, wrp->phy_utmi, 0x02);
+		break;
+	case MUSB_PERIPHERAL:
+		reg |= (1 << wrp->iddig);
+
+		/*
+		 * if we're setting mode to host-only or device-only, we're
+		 * going to ignore whatever the PHY sends us and just force
+		 * ID pin status by SW
+		 */
+		reg |= (1 << wrp->iddig_mux);
+
+		musb_writel(ctrl_base, wrp->mode, reg);
+		break;
+	case MUSB_OTG:
+		musb_writel(ctrl_base, wrp->phy_utmi, 0x02);
+		break;
+	default:
+		dev_err(glue->dev, "unsupported mode %d\n", mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static bool dsps_sw_babble_control(struct musb *musb)
+{
+	u8 babble_ctl;
+	bool session_restart =  false;
+
+	babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
+	dev_dbg(musb->controller, "babble: MUSB_BABBLE_CTL value %x\n",
+		babble_ctl);
+	/*
+	 * check line monitor flag to check whether babble is
+	 * due to noise
+	 */
+	dev_dbg(musb->controller, "STUCK_J is %s\n",
+		babble_ctl & MUSB_BABBLE_STUCK_J ? "set" : "reset");
+
+	if (babble_ctl & MUSB_BABBLE_STUCK_J) {
+		int timeout = 10;
+
+		/*
+		 * babble is due to noise, then set transmit idle (d7 bit)
+		 * to resume normal operation
+		 */
+		babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
+		babble_ctl |= MUSB_BABBLE_FORCE_TXIDLE;
+		musb_writeb(musb->mregs, MUSB_BABBLE_CTL, babble_ctl);
+
+		/* wait till line monitor flag cleared */
+		dev_dbg(musb->controller, "Set TXIDLE, wait J to clear\n");
+		do {
+			babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
+			udelay(1);
+		} while ((babble_ctl & MUSB_BABBLE_STUCK_J) && timeout--);
+
+		/* check whether stuck_at_j bit cleared */
+		if (babble_ctl & MUSB_BABBLE_STUCK_J) {
+			/*
+			 * real babble condition has occurred
+			 * restart the controller to start the
+			 * session again
+			 */
+			dev_dbg(musb->controller, "J not cleared, misc (%x)\n",
+				babble_ctl);
+			session_restart = true;
+		}
+	} else {
+		session_restart = true;
+	}
+
+	return session_restart;
+}
+
+static int dsps_musb_recover(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+	int session_restart = 0;
+
+	if (glue->sw_babble_enabled)
+		session_restart = dsps_sw_babble_control(musb);
+	else
+		session_restart = 1;
+
+	return session_restart ? 0 : -EPIPE;
+}
+
+/* Similar to am35x, dm81xx support only 32-bit read operation */
+static void dsps_read_fifo32(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+	void __iomem *fifo = hw_ep->fifo;
+
+	if (len >= 4) {
+		ioread32_rep(fifo, dst, len >> 2);
+		dst += len & ~0x03;
+		len &= 0x03;
+	}
+
+	/* Read any remaining 1 to 3 bytes */
+	if (len > 0) {
+		u32 val = musb_readl(fifo, 0);
+		memcpy(dst, &val, len);
+	}
+}
+
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+static void dsps_dma_controller_callback(struct dma_controller *c)
+{
+	struct musb *musb = c->musb;
+	struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
+	void __iomem *usbss_base = glue->usbss_base;
+	u32 status;
+
+	status = musb_readl(usbss_base, USBSS_IRQ_STATUS);
+	if (status & USBSS_IRQ_PD_COMP)
+		musb_writel(usbss_base, USBSS_IRQ_STATUS, USBSS_IRQ_PD_COMP);
+}
+
+static struct dma_controller *
+dsps_dma_controller_create(struct musb *musb, void __iomem *base)
+{
+	struct dma_controller *controller;
+	struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
+	void __iomem *usbss_base = glue->usbss_base;
+
+	controller = cppi41_dma_controller_create(musb, base);
+	if (IS_ERR_OR_NULL(controller))
+		return controller;
+
+	musb_writel(usbss_base, USBSS_IRQ_ENABLER, USBSS_IRQ_PD_COMP);
+	controller->dma_callback = dsps_dma_controller_callback;
+
+	return controller;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void dsps_dma_controller_suspend(struct dsps_glue *glue)
+{
+	void __iomem *usbss_base = glue->usbss_base;
+
+	musb_writel(usbss_base, USBSS_IRQ_CLEARR, USBSS_IRQ_PD_COMP);
+}
+
+static void dsps_dma_controller_resume(struct dsps_glue *glue)
+{
+	void __iomem *usbss_base = glue->usbss_base;
+
+	musb_writel(usbss_base, USBSS_IRQ_ENABLER, USBSS_IRQ_PD_COMP);
+}
+#endif
+#else /* CONFIG_USB_TI_CPPI41_DMA */
+#ifdef CONFIG_PM_SLEEP
+static void dsps_dma_controller_suspend(struct dsps_glue *glue) {}
+static void dsps_dma_controller_resume(struct dsps_glue *glue) {}
+#endif
+#endif /* CONFIG_USB_TI_CPPI41_DMA */
+
+static struct musb_platform_ops dsps_ops = {
+	.quirks		= MUSB_DMA_CPPI41 | MUSB_INDEXED_EP,
+	.init		= dsps_musb_init,
+	.exit		= dsps_musb_exit,
+
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+	.dma_init	= dsps_dma_controller_create,
+	.dma_exit	= cppi41_dma_controller_destroy,
+#endif
+	.enable		= dsps_musb_enable,
+	.disable	= dsps_musb_disable,
+
+	.set_mode	= dsps_musb_set_mode,
+	.recover	= dsps_musb_recover,
+	.clear_ep_rxintr = dsps_musb_clear_ep_rxintr,
+};
+
+static u64 musb_dmamask = DMA_BIT_MASK(32);
+
+static int get_int_prop(struct device_node *dn, const char *s)
+{
+	int ret;
+	u32 val;
+
+	ret = of_property_read_u32(dn, s, &val);
+	if (ret)
+		return 0;
+	return val;
+}
+
+static int dsps_create_musb_pdev(struct dsps_glue *glue,
+		struct platform_device *parent)
+{
+	struct musb_hdrc_platform_data pdata;
+	struct resource	resources[2];
+	struct resource	*res;
+	struct device *dev = &parent->dev;
+	struct musb_hdrc_config	*config;
+	struct platform_device *musb;
+	struct device_node *dn = parent->dev.of_node;
+	int ret, val;
+
+	memset(resources, 0, sizeof(resources));
+	res = platform_get_resource_byname(parent, IORESOURCE_MEM, "mc");
+	if (!res) {
+		dev_err(dev, "failed to get memory.\n");
+		return -EINVAL;
+	}
+	resources[0] = *res;
+
+	ret = platform_get_irq_byname(parent, "mc");
+	if (ret < 0)
+		return ret;
+
+	resources[1].start = ret;
+	resources[1].end = ret;
+	resources[1].flags = IORESOURCE_IRQ | irq_get_trigger_type(ret);
+	resources[1].name = "mc";
+
+	/* allocate the child platform device */
+	musb = platform_device_alloc("musb-hdrc",
+			(resources[0].start & 0xFFF) == 0x400 ? 0 : 1);
+	if (!musb) {
+		dev_err(dev, "failed to allocate musb device\n");
+		return -ENOMEM;
+	}
+
+	musb->dev.parent		= dev;
+	musb->dev.dma_mask		= &musb_dmamask;
+	musb->dev.coherent_dma_mask	= musb_dmamask;
+	device_set_of_node_from_dev(&musb->dev, &parent->dev);
+
+	glue->musb = musb;
+
+	ret = platform_device_add_resources(musb, resources,
+			ARRAY_SIZE(resources));
+	if (ret) {
+		dev_err(dev, "failed to add resources\n");
+		goto err;
+	}
+
+	config = devm_kzalloc(&parent->dev, sizeof(*config), GFP_KERNEL);
+	if (!config) {
+		ret = -ENOMEM;
+		goto err;
+	}
+	pdata.config = config;
+	pdata.platform_ops = &dsps_ops;
+
+	config->num_eps = get_int_prop(dn, "mentor,num-eps");
+	config->ram_bits = get_int_prop(dn, "mentor,ram-bits");
+	config->host_port_deassert_reset_at_resume = 1;
+	pdata.mode = musb_get_mode(dev);
+	/* DT keeps this entry in mA, musb expects it as per USB spec */
+	pdata.power = get_int_prop(dn, "mentor,power") / 2;
+
+	ret = of_property_read_u32(dn, "mentor,multipoint", &val);
+	if (!ret && val)
+		config->multipoint = true;
+
+	config->maximum_speed = usb_get_maximum_speed(&parent->dev);
+	switch (config->maximum_speed) {
+	case USB_SPEED_LOW:
+	case USB_SPEED_FULL:
+		break;
+	case USB_SPEED_SUPER:
+		dev_warn(dev, "ignore incorrect maximum_speed "
+				"(super-speed) setting in dts");
+		fallthrough;
+	default:
+		config->maximum_speed = USB_SPEED_HIGH;
+	}
+
+	ret = platform_device_add_data(musb, &pdata, sizeof(pdata));
+	if (ret) {
+		dev_err(dev, "failed to add platform_data\n");
+		goto err;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(dev, "failed to register musb device\n");
+		goto err;
+	}
+	return 0;
+
+err:
+	platform_device_put(musb);
+	return ret;
+}
+
+static irqreturn_t dsps_vbus_threaded_irq(int irq, void *priv)
+{
+	struct dsps_glue *glue = priv;
+	struct musb *musb = platform_get_drvdata(glue->musb);
+
+	if (!musb)
+		return IRQ_NONE;
+
+	dev_dbg(glue->dev, "VBUS interrupt\n");
+	dsps_mod_timer(glue, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int dsps_setup_optional_vbus_irq(struct platform_device *pdev,
+					struct dsps_glue *glue)
+{
+	int error;
+
+	glue->vbus_irq = platform_get_irq_byname(pdev, "vbus");
+	if (glue->vbus_irq == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
+	if (glue->vbus_irq <= 0) {
+		glue->vbus_irq = 0;
+		return 0;
+	}
+
+	error = devm_request_threaded_irq(glue->dev, glue->vbus_irq,
+					  NULL, dsps_vbus_threaded_irq,
+					  IRQF_ONESHOT,
+					  "vbus", glue);
+	if (error) {
+		glue->vbus_irq = 0;
+		return error;
+	}
+	dev_dbg(glue->dev, "VBUS irq %i configured\n", glue->vbus_irq);
+
+	return 0;
+}
+
+static int dsps_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	const struct dsps_musb_wrapper *wrp;
+	struct dsps_glue *glue;
+	int ret;
+
+	if (!strcmp(pdev->name, "musb-hdrc"))
+		return -ENODEV;
+
+	match = of_match_node(musb_dsps_of_match, pdev->dev.of_node);
+	if (!match) {
+		dev_err(&pdev->dev, "fail to get matching of_match struct\n");
+		return -EINVAL;
+	}
+	wrp = match->data;
+
+	if (of_device_is_compatible(pdev->dev.of_node, "ti,musb-dm816"))
+		dsps_ops.read_fifo = dsps_read_fifo32;
+
+	/* allocate glue */
+	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		return -ENOMEM;
+
+	glue->dev = &pdev->dev;
+	glue->wrp = wrp;
+	glue->usbss_base = of_iomap(pdev->dev.parent->of_node, 0);
+	if (!glue->usbss_base)
+		return -ENXIO;
+
+	platform_set_drvdata(pdev, glue);
+	pm_runtime_enable(&pdev->dev);
+	ret = dsps_create_musb_pdev(glue, pdev);
+	if (ret)
+		goto err;
+
+	if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL) {
+		ret = dsps_setup_optional_vbus_irq(pdev, glue);
+		if (ret)
+			goto unregister_pdev;
+	}
+
+	return 0;
+
+unregister_pdev:
+	platform_device_unregister(glue->musb);
+err:
+	pm_runtime_disable(&pdev->dev);
+	iounmap(glue->usbss_base);
+	return ret;
+}
+
+static int dsps_remove(struct platform_device *pdev)
+{
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+
+	platform_device_unregister(glue->musb);
+
+	pm_runtime_disable(&pdev->dev);
+	iounmap(glue->usbss_base);
+
+	return 0;
+}
+
+static const struct dsps_musb_wrapper am33xx_driver_data = {
+	.revision		= 0x00,
+	.control		= 0x14,
+	.status			= 0x18,
+	.epintr_set		= 0x38,
+	.epintr_clear		= 0x40,
+	.epintr_status		= 0x30,
+	.coreintr_set		= 0x3c,
+	.coreintr_clear		= 0x44,
+	.coreintr_status	= 0x34,
+	.phy_utmi		= 0xe0,
+	.mode			= 0xe8,
+	.tx_mode		= 0x70,
+	.rx_mode		= 0x74,
+	.reset			= 0,
+	.otg_disable		= 21,
+	.iddig			= 8,
+	.iddig_mux		= 7,
+	.usb_shift		= 0,
+	.usb_mask		= 0x1ff,
+	.usb_bitmap		= (0x1ff << 0),
+	.drvvbus		= 8,
+	.txep_shift		= 0,
+	.txep_mask		= 0xffff,
+	.txep_bitmap		= (0xffff << 0),
+	.rxep_shift		= 16,
+	.rxep_mask		= 0xfffe,
+	.rxep_bitmap		= (0xfffe << 16),
+	.poll_timeout		= 2000, /* ms */
+};
+
+static const struct of_device_id musb_dsps_of_match[] = {
+	{ .compatible = "ti,musb-am33xx",
+		.data = &am33xx_driver_data, },
+	{ .compatible = "ti,musb-dm816",
+		.data = &am33xx_driver_data, },
+	{  },
+};
+MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
+
+#ifdef CONFIG_PM_SLEEP
+static int dsps_suspend(struct device *dev)
+{
+	struct dsps_glue *glue = dev_get_drvdata(dev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	struct musb *musb = platform_get_drvdata(glue->musb);
+	void __iomem *mbase;
+	int ret;
+
+	if (!musb)
+		/* This can happen if the musb device is in -EPROBE_DEFER */
+		return 0;
+
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(dev);
+		return ret;
+	}
+
+	del_timer_sync(&musb->dev_timer);
+
+	mbase = musb->ctrl_base;
+	glue->context.control = musb_readl(mbase, wrp->control);
+	glue->context.epintr = musb_readl(mbase, wrp->epintr_set);
+	glue->context.coreintr = musb_readl(mbase, wrp->coreintr_set);
+	glue->context.phy_utmi = musb_readl(mbase, wrp->phy_utmi);
+	glue->context.mode = musb_readl(mbase, wrp->mode);
+	glue->context.tx_mode = musb_readl(mbase, wrp->tx_mode);
+	glue->context.rx_mode = musb_readl(mbase, wrp->rx_mode);
+
+	dsps_dma_controller_suspend(glue);
+
+	return 0;
+}
+
+static int dsps_resume(struct device *dev)
+{
+	struct dsps_glue *glue = dev_get_drvdata(dev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	struct musb *musb = platform_get_drvdata(glue->musb);
+	void __iomem *mbase;
+
+	if (!musb)
+		return 0;
+
+	dsps_dma_controller_resume(glue);
+
+	mbase = musb->ctrl_base;
+	musb_writel(mbase, wrp->control, glue->context.control);
+	musb_writel(mbase, wrp->epintr_set, glue->context.epintr);
+	musb_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
+	musb_writel(mbase, wrp->phy_utmi, glue->context.phy_utmi);
+	musb_writel(mbase, wrp->mode, glue->context.mode);
+	musb_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
+	musb_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
+	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
+	    musb->port_mode == MUSB_OTG)
+		dsps_mod_timer(glue, -1);
+
+	pm_runtime_put(dev);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume);
+
+static struct platform_driver dsps_usbss_driver = {
+	.probe		= dsps_probe,
+	.remove         = dsps_remove,
+	.driver         = {
+		.name   = "musb-dsps",
+		.pm	= &dsps_pm_ops,
+		.of_match_table	= musb_dsps_of_match,
+	},
+};
+
+MODULE_DESCRIPTION("TI DSPS MUSB Glue Layer");
+MODULE_AUTHOR("Ravi B <ravibabu@ti.com>");
+MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+module_platform_driver(dsps_usbss_driver);
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
new file mode 100644
index 000000000..ba20272d2
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget.c
@@ -0,0 +1,2093 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MUSB OTG driver peripheral support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+#include "musb_core.h"
+#include "musb_trace.h"
+
+
+/* ----------------------------------------------------------------------- */
+
+#define is_buffer_mapped(req) (is_dma_capable() && \
+					(req->map_state != UN_MAPPED))
+
+/* Maps the buffer to dma  */
+
+static inline void map_dma_buffer(struct musb_request *request,
+			struct musb *musb, struct musb_ep *musb_ep)
+{
+	int compatible = true;
+	struct dma_controller *dma = musb->dma_controller;
+
+	request->map_state = UN_MAPPED;
+
+	if (!is_dma_capable() || !musb_ep->dma)
+		return;
+
+	/* Check if DMA engine can handle this request.
+	 * DMA code must reject the USB request explicitly.
+	 * Default behaviour is to map the request.
+	 */
+	if (dma->is_compatible)
+		compatible = dma->is_compatible(musb_ep->dma,
+				musb_ep->packet_sz, request->request.buf,
+				request->request.length);
+	if (!compatible)
+		return;
+
+	if (request->request.dma == DMA_ADDR_INVALID) {
+		dma_addr_t dma_addr;
+		int ret;
+
+		dma_addr = dma_map_single(
+				musb->controller,
+				request->request.buf,
+				request->request.length,
+				request->tx
+					? DMA_TO_DEVICE
+					: DMA_FROM_DEVICE);
+		ret = dma_mapping_error(musb->controller, dma_addr);
+		if (ret)
+			return;
+
+		request->request.dma = dma_addr;
+		request->map_state = MUSB_MAPPED;
+	} else {
+		dma_sync_single_for_device(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+		request->map_state = PRE_MAPPED;
+	}
+}
+
+/* Unmap the buffer from dma and maps it back to cpu */
+static inline void unmap_dma_buffer(struct musb_request *request,
+				struct musb *musb)
+{
+	struct musb_ep *musb_ep = request->ep;
+
+	if (!is_buffer_mapped(request) || !musb_ep->dma)
+		return;
+
+	if (request->request.dma == DMA_ADDR_INVALID) {
+		dev_vdbg(musb->controller,
+				"not unmapping a never mapped buffer\n");
+		return;
+	}
+	if (request->map_state == MUSB_MAPPED) {
+		dma_unmap_single(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+		request->request.dma = DMA_ADDR_INVALID;
+	} else { /* PRE_MAPPED */
+		dma_sync_single_for_cpu(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+	}
+	request->map_state = UN_MAPPED;
+}
+
+/*
+ * Immediately complete a request.
+ *
+ * @param request the request to complete
+ * @param status the status to complete the request with
+ * Context: controller locked, IRQs blocked.
+ */
+void musb_g_giveback(
+	struct musb_ep		*ep,
+	struct usb_request	*request,
+	int			status)
+__releases(ep->musb->lock)
+__acquires(ep->musb->lock)
+{
+	struct musb_request	*req;
+	struct musb		*musb;
+	int			busy = ep->busy;
+
+	req = to_musb_request(request);
+
+	list_del(&req->list);
+	if (req->request.status == -EINPROGRESS)
+		req->request.status = status;
+	musb = req->musb;
+
+	ep->busy = 1;
+	spin_unlock(&musb->lock);
+
+	if (!dma_mapping_error(&musb->g.dev, request->dma))
+		unmap_dma_buffer(req, musb);
+
+	trace_musb_req_gb(req);
+	usb_gadget_giveback_request(&req->ep->end_point, &req->request);
+	spin_lock(&musb->lock);
+	ep->busy = busy;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/*
+ * Abort requests queued to an endpoint using the status. Synchronous.
+ * caller locked controller and blocked irqs, and selected this ep.
+ */
+static void nuke(struct musb_ep *ep, const int status)
+{
+	struct musb		*musb = ep->musb;
+	struct musb_request	*req = NULL;
+	void __iomem *epio = ep->musb->endpoints[ep->current_epnum].regs;
+
+	ep->busy = 1;
+
+	if (is_dma_capable() && ep->dma) {
+		struct dma_controller	*c = ep->musb->dma_controller;
+		int value;
+
+		if (ep->is_in) {
+			/*
+			 * The programming guide says that we must not clear
+			 * the DMAMODE bit before DMAENAB, so we only
+			 * clear it in the second write...
+			 */
+			musb_writew(epio, MUSB_TXCSR,
+				    MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO);
+			musb_writew(epio, MUSB_TXCSR,
+					0 | MUSB_TXCSR_FLUSHFIFO);
+		} else {
+			musb_writew(epio, MUSB_RXCSR,
+					0 | MUSB_RXCSR_FLUSHFIFO);
+			musb_writew(epio, MUSB_RXCSR,
+					0 | MUSB_RXCSR_FLUSHFIFO);
+		}
+
+		value = c->channel_abort(ep->dma);
+		musb_dbg(musb, "%s: abort DMA --> %d", ep->name, value);
+		c->channel_release(ep->dma);
+		ep->dma = NULL;
+	}
+
+	while (!list_empty(&ep->req_list)) {
+		req = list_first_entry(&ep->req_list, struct musb_request, list);
+		musb_g_giveback(ep, &req->request, status);
+	}
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* Data transfers - pure PIO, pure DMA, or mixed mode */
+
+/*
+ * This assumes the separate CPPI engine is responding to DMA requests
+ * from the usb core ... sequenced a bit differently from mentor dma.
+ */
+
+static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep)
+{
+	if (can_bulk_split(musb, ep->type))
+		return ep->hw_ep->max_packet_sz_tx;
+	else
+		return ep->packet_sz;
+}
+
+/*
+ * An endpoint is transmitting data. This can be called either from
+ * the IRQ routine or from ep.queue() to kickstart a request on an
+ * endpoint.
+ *
+ * Context: controller locked, IRQs blocked, endpoint selected
+ */
+static void txstate(struct musb *musb, struct musb_request *req)
+{
+	u8			epnum = req->epnum;
+	struct musb_ep		*musb_ep;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct usb_request	*request;
+	u16			fifo_count = 0, csr;
+	int			use_dma = 0;
+
+	musb_ep = req->ep;
+
+	/* Check if EP is disabled */
+	if (!musb_ep->desc) {
+		musb_dbg(musb, "ep:%s disabled - ignore request",
+						musb_ep->end_point.name);
+		return;
+	}
+
+	/* we shouldn't get here while DMA is active ... but we do ... */
+	if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
+		musb_dbg(musb, "dma pending...");
+		return;
+	}
+
+	/* read TXCSR before */
+	csr = musb_readw(epio, MUSB_TXCSR);
+
+	request = &req->request;
+	fifo_count = min(max_ep_writesize(musb, musb_ep),
+			(int)(request->length - request->actual));
+
+	if (csr & MUSB_TXCSR_TXPKTRDY) {
+		musb_dbg(musb, "%s old packet still ready , txcsr %03x",
+				musb_ep->end_point.name, csr);
+		return;
+	}
+
+	if (csr & MUSB_TXCSR_P_SENDSTALL) {
+		musb_dbg(musb, "%s stalling, txcsr %03x",
+				musb_ep->end_point.name, csr);
+		return;
+	}
+
+	musb_dbg(musb, "hw_ep%d, maxpacket %d, fifo count %d, txcsr %03x",
+			epnum, musb_ep->packet_sz, fifo_count,
+			csr);
+
+#ifndef	CONFIG_MUSB_PIO_ONLY
+	if (is_buffer_mapped(req)) {
+		struct dma_controller	*c = musb->dma_controller;
+		size_t request_size;
+
+		/* setup DMA, then program endpoint CSR */
+		request_size = min_t(size_t, request->length - request->actual,
+					musb_ep->dma->max_len);
+
+		use_dma = (request->dma != DMA_ADDR_INVALID && request_size);
+
+		/* MUSB_TXCSR_P_ISO is still set correctly */
+
+		if (musb_dma_inventra(musb) || musb_dma_ux500(musb)) {
+			if (request_size < musb_ep->packet_sz)
+				musb_ep->dma->desired_mode = 0;
+			else
+				musb_ep->dma->desired_mode = 1;
+
+			use_dma = use_dma && c->channel_program(
+					musb_ep->dma, musb_ep->packet_sz,
+					musb_ep->dma->desired_mode,
+					request->dma + request->actual, request_size);
+			if (use_dma) {
+				if (musb_ep->dma->desired_mode == 0) {
+					/*
+					 * We must not clear the DMAMODE bit
+					 * before the DMAENAB bit -- and the
+					 * latter doesn't always get cleared
+					 * before we get here...
+					 */
+					csr &= ~(MUSB_TXCSR_AUTOSET
+						| MUSB_TXCSR_DMAENAB);
+					musb_writew(epio, MUSB_TXCSR, csr
+						| MUSB_TXCSR_P_WZC_BITS);
+					csr &= ~MUSB_TXCSR_DMAMODE;
+					csr |= (MUSB_TXCSR_DMAENAB |
+							MUSB_TXCSR_MODE);
+					/* against programming guide */
+				} else {
+					csr |= (MUSB_TXCSR_DMAENAB
+							| MUSB_TXCSR_DMAMODE
+							| MUSB_TXCSR_MODE);
+					/*
+					 * Enable Autoset according to table
+					 * below
+					 * bulk_split hb_mult	Autoset_Enable
+					 *	0	0	Yes(Normal)
+					 *	0	>0	No(High BW ISO)
+					 *	1	0	Yes(HS bulk)
+					 *	1	>0	Yes(FS bulk)
+					 */
+					if (!musb_ep->hb_mult ||
+					    can_bulk_split(musb,
+							   musb_ep->type))
+						csr |= MUSB_TXCSR_AUTOSET;
+				}
+				csr &= ~MUSB_TXCSR_P_UNDERRUN;
+
+				musb_writew(epio, MUSB_TXCSR, csr);
+			}
+		}
+
+		if (is_cppi_enabled(musb)) {
+			/* program endpoint CSR first, then setup DMA */
+			csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
+			csr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_DMAMODE |
+				MUSB_TXCSR_MODE;
+			musb_writew(epio, MUSB_TXCSR, (MUSB_TXCSR_P_WZC_BITS &
+						~MUSB_TXCSR_P_UNDERRUN) | csr);
+
+			/* ensure writebuffer is empty */
+			csr = musb_readw(epio, MUSB_TXCSR);
+
+			/*
+			 * NOTE host side sets DMAENAB later than this; both are
+			 * OK since the transfer dma glue (between CPPI and
+			 * Mentor fifos) just tells CPPI it could start. Data
+			 * only moves to the USB TX fifo when both fifos are
+			 * ready.
+			 */
+			/*
+			 * "mode" is irrelevant here; handle terminating ZLPs
+			 * like PIO does, since the hardware RNDIS mode seems
+			 * unreliable except for the
+			 * last-packet-is-already-short case.
+			 */
+			use_dma = use_dma && c->channel_program(
+					musb_ep->dma, musb_ep->packet_sz,
+					0,
+					request->dma + request->actual,
+					request_size);
+			if (!use_dma) {
+				c->channel_release(musb_ep->dma);
+				musb_ep->dma = NULL;
+				csr &= ~MUSB_TXCSR_DMAENAB;
+				musb_writew(epio, MUSB_TXCSR, csr);
+				/* invariant: prequest->buf is non-null */
+			}
+		} else if (tusb_dma_omap(musb))
+			use_dma = use_dma && c->channel_program(
+					musb_ep->dma, musb_ep->packet_sz,
+					request->zero,
+					request->dma + request->actual,
+					request_size);
+	}
+#endif
+
+	if (!use_dma) {
+		/*
+		 * Unmap the dma buffer back to cpu if dma channel
+		 * programming fails
+		 */
+		unmap_dma_buffer(req, musb);
+
+		musb_write_fifo(musb_ep->hw_ep, fifo_count,
+				(u8 *) (request->buf + request->actual));
+		request->actual += fifo_count;
+		csr |= MUSB_TXCSR_TXPKTRDY;
+		csr &= ~MUSB_TXCSR_P_UNDERRUN;
+		musb_writew(epio, MUSB_TXCSR, csr);
+	}
+
+	/* host may already have the data when this message shows... */
+	musb_dbg(musb, "%s TX/IN %s len %d/%d, txcsr %04x, fifo %d/%d",
+			musb_ep->end_point.name, use_dma ? "dma" : "pio",
+			request->actual, request->length,
+			musb_readw(epio, MUSB_TXCSR),
+			fifo_count,
+			musb_readw(epio, MUSB_TXMAXP));
+}
+
+/*
+ * FIFO state update (e.g. data ready).
+ * Called from IRQ,  with controller locked.
+ */
+void musb_g_tx(struct musb *musb, u8 epnum)
+{
+	u16			csr;
+	struct musb_request	*req;
+	struct usb_request	*request;
+	u8 __iomem		*mbase = musb->mregs;
+	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_in;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct dma_channel	*dma;
+
+	musb_ep_select(mbase, epnum);
+	req = next_request(musb_ep);
+	request = &req->request;
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	musb_dbg(musb, "<== %s, txcsr %04x", musb_ep->end_point.name, csr);
+
+	dma = is_dma_capable() ? musb_ep->dma : NULL;
+
+	/*
+	 * REVISIT: for high bandwidth, MUSB_TXCSR_P_INCOMPTX
+	 * probably rates reporting as a host error.
+	 */
+	if (csr & MUSB_TXCSR_P_SENTSTALL) {
+		csr |=	MUSB_TXCSR_P_WZC_BITS;
+		csr &= ~MUSB_TXCSR_P_SENTSTALL;
+		musb_writew(epio, MUSB_TXCSR, csr);
+		return;
+	}
+
+	if (csr & MUSB_TXCSR_P_UNDERRUN) {
+		/* We NAKed, no big deal... little reason to care. */
+		csr |=	 MUSB_TXCSR_P_WZC_BITS;
+		csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
+		musb_writew(epio, MUSB_TXCSR, csr);
+		dev_vdbg(musb->controller, "underrun on ep%d, req %p\n",
+				epnum, request);
+	}
+
+	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+		/*
+		 * SHOULD NOT HAPPEN... has with CPPI though, after
+		 * changing SENDSTALL (and other cases); harmless?
+		 */
+		musb_dbg(musb, "%s dma still busy?", musb_ep->end_point.name);
+		return;
+	}
+
+	if (req) {
+
+		trace_musb_req_tx(req);
+
+		if (dma && (csr & MUSB_TXCSR_DMAENAB)) {
+			csr |= MUSB_TXCSR_P_WZC_BITS;
+			csr &= ~(MUSB_TXCSR_DMAENAB | MUSB_TXCSR_P_UNDERRUN |
+				 MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_AUTOSET);
+			musb_writew(epio, MUSB_TXCSR, csr);
+			/* Ensure writebuffer is empty. */
+			csr = musb_readw(epio, MUSB_TXCSR);
+			request->actual += musb_ep->dma->actual_len;
+			musb_dbg(musb, "TXCSR%d %04x, DMA off, len %zu, req %p",
+				epnum, csr, musb_ep->dma->actual_len, request);
+		}
+
+		/*
+		 * First, maybe a terminating short packet. Some DMA
+		 * engines might handle this by themselves.
+		 */
+		if ((request->zero && request->length)
+			&& (request->length % musb_ep->packet_sz == 0)
+			&& (request->actual == request->length)) {
+
+			/*
+			 * On DMA completion, FIFO may not be
+			 * available yet...
+			 */
+			if (csr & MUSB_TXCSR_TXPKTRDY)
+				return;
+
+			musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_MODE
+					| MUSB_TXCSR_TXPKTRDY);
+			request->zero = 0;
+		}
+
+		if (request->actual == request->length) {
+			musb_g_giveback(musb_ep, request, 0);
+			/*
+			 * In the giveback function the MUSB lock is
+			 * released and acquired after sometime. During
+			 * this time period the INDEX register could get
+			 * changed by the gadget_queue function especially
+			 * on SMP systems. Reselect the INDEX to be sure
+			 * we are reading/modifying the right registers
+			 */
+			musb_ep_select(mbase, epnum);
+			req = musb_ep->desc ? next_request(musb_ep) : NULL;
+			if (!req) {
+				musb_dbg(musb, "%s idle now",
+					musb_ep->end_point.name);
+				return;
+			}
+		}
+
+		txstate(musb, req);
+	}
+}
+
+/* ------------------------------------------------------------ */
+
+/*
+ * Context: controller locked, IRQs blocked, endpoint selected
+ */
+static void rxstate(struct musb *musb, struct musb_request *req)
+{
+	const u8		epnum = req->epnum;
+	struct usb_request	*request = &req->request;
+	struct musb_ep		*musb_ep;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	unsigned		len = 0;
+	u16			fifo_count;
+	u16			csr = musb_readw(epio, MUSB_RXCSR);
+	struct musb_hw_ep	*hw_ep = &musb->endpoints[epnum];
+	u8			use_mode_1;
+
+	if (hw_ep->is_shared_fifo)
+		musb_ep = &hw_ep->ep_in;
+	else
+		musb_ep = &hw_ep->ep_out;
+
+	fifo_count = musb_ep->packet_sz;
+
+	/* Check if EP is disabled */
+	if (!musb_ep->desc) {
+		musb_dbg(musb, "ep:%s disabled - ignore request",
+						musb_ep->end_point.name);
+		return;
+	}
+
+	/* We shouldn't get here while DMA is active, but we do... */
+	if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
+		musb_dbg(musb, "DMA pending...");
+		return;
+	}
+
+	if (csr & MUSB_RXCSR_P_SENDSTALL) {
+		musb_dbg(musb, "%s stalling, RXCSR %04x",
+		    musb_ep->end_point.name, csr);
+		return;
+	}
+
+	if (is_cppi_enabled(musb) && is_buffer_mapped(req)) {
+		struct dma_controller	*c = musb->dma_controller;
+		struct dma_channel	*channel = musb_ep->dma;
+
+		/* NOTE:  CPPI won't actually stop advancing the DMA
+		 * queue after short packet transfers, so this is almost
+		 * always going to run as IRQ-per-packet DMA so that
+		 * faults will be handled correctly.
+		 */
+		if (c->channel_program(channel,
+				musb_ep->packet_sz,
+				!request->short_not_ok,
+				request->dma + request->actual,
+				request->length - request->actual)) {
+
+			/* make sure that if an rxpkt arrived after the irq,
+			 * the cppi engine will be ready to take it as soon
+			 * as DMA is enabled
+			 */
+			csr &= ~(MUSB_RXCSR_AUTOCLEAR
+					| MUSB_RXCSR_DMAMODE);
+			csr |= MUSB_RXCSR_DMAENAB | MUSB_RXCSR_P_WZC_BITS;
+			musb_writew(epio, MUSB_RXCSR, csr);
+			return;
+		}
+	}
+
+	if (csr & MUSB_RXCSR_RXPKTRDY) {
+		fifo_count = musb_readw(epio, MUSB_RXCOUNT);
+
+		/*
+		 * Enable Mode 1 on RX transfers only when short_not_ok flag
+		 * is set. Currently short_not_ok flag is set only from
+		 * file_storage and f_mass_storage drivers
+		 */
+
+		if (request->short_not_ok && fifo_count == musb_ep->packet_sz)
+			use_mode_1 = 1;
+		else
+			use_mode_1 = 0;
+
+		if (request->actual < request->length) {
+			if (!is_buffer_mapped(req))
+				goto buffer_aint_mapped;
+
+			if (musb_dma_inventra(musb)) {
+				struct dma_controller	*c;
+				struct dma_channel	*channel;
+				int			use_dma = 0;
+				unsigned int transfer_size;
+
+				c = musb->dma_controller;
+				channel = musb_ep->dma;
+
+	/* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
+	 * mode 0 only. So we do not get endpoint interrupts due to DMA
+	 * completion. We only get interrupts from DMA controller.
+	 *
+	 * We could operate in DMA mode 1 if we knew the size of the transfer
+	 * in advance. For mass storage class, request->length = what the host
+	 * sends, so that'd work.  But for pretty much everything else,
+	 * request->length is routinely more than what the host sends. For
+	 * most these gadgets, end of is signified either by a short packet,
+	 * or filling the last byte of the buffer.  (Sending extra data in
+	 * that last pckate should trigger an overflow fault.)  But in mode 1,
+	 * we don't get DMA completion interrupt for short packets.
+	 *
+	 * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
+	 * to get endpoint interrupt on every DMA req, but that didn't seem
+	 * to work reliably.
+	 *
+	 * REVISIT an updated g_file_storage can set req->short_not_ok, which
+	 * then becomes usable as a runtime "use mode 1" hint...
+	 */
+
+				/* Experimental: Mode1 works with mass storage use cases */
+				if (use_mode_1) {
+					csr |= MUSB_RXCSR_AUTOCLEAR;
+					musb_writew(epio, MUSB_RXCSR, csr);
+					csr |= MUSB_RXCSR_DMAENAB;
+					musb_writew(epio, MUSB_RXCSR, csr);
+
+					/*
+					 * this special sequence (enabling and then
+					 * disabling MUSB_RXCSR_DMAMODE) is required
+					 * to get DMAReq to activate
+					 */
+					musb_writew(epio, MUSB_RXCSR,
+						csr | MUSB_RXCSR_DMAMODE);
+					musb_writew(epio, MUSB_RXCSR, csr);
+
+					transfer_size = min_t(unsigned int,
+							request->length -
+							request->actual,
+							channel->max_len);
+					musb_ep->dma->desired_mode = 1;
+				} else {
+					if (!musb_ep->hb_mult &&
+						musb_ep->hw_ep->rx_double_buffered)
+						csr |= MUSB_RXCSR_AUTOCLEAR;
+					csr |= MUSB_RXCSR_DMAENAB;
+					musb_writew(epio, MUSB_RXCSR, csr);
+
+					transfer_size = min(request->length - request->actual,
+							(unsigned)fifo_count);
+					musb_ep->dma->desired_mode = 0;
+				}
+
+				use_dma = c->channel_program(
+						channel,
+						musb_ep->packet_sz,
+						channel->desired_mode,
+						request->dma
+						+ request->actual,
+						transfer_size);
+
+				if (use_dma)
+					return;
+			}
+
+			if ((musb_dma_ux500(musb)) &&
+				(request->actual < request->length)) {
+
+				struct dma_controller *c;
+				struct dma_channel *channel;
+				unsigned int transfer_size = 0;
+
+				c = musb->dma_controller;
+				channel = musb_ep->dma;
+
+				/* In case first packet is short */
+				if (fifo_count < musb_ep->packet_sz)
+					transfer_size = fifo_count;
+				else if (request->short_not_ok)
+					transfer_size =	min_t(unsigned int,
+							request->length -
+							request->actual,
+							channel->max_len);
+				else
+					transfer_size = min_t(unsigned int,
+							request->length -
+							request->actual,
+							(unsigned)fifo_count);
+
+				csr &= ~MUSB_RXCSR_DMAMODE;
+				csr |= (MUSB_RXCSR_DMAENAB |
+					MUSB_RXCSR_AUTOCLEAR);
+
+				musb_writew(epio, MUSB_RXCSR, csr);
+
+				if (transfer_size <= musb_ep->packet_sz) {
+					musb_ep->dma->desired_mode = 0;
+				} else {
+					musb_ep->dma->desired_mode = 1;
+					/* Mode must be set after DMAENAB */
+					csr |= MUSB_RXCSR_DMAMODE;
+					musb_writew(epio, MUSB_RXCSR, csr);
+				}
+
+				if (c->channel_program(channel,
+							musb_ep->packet_sz,
+							channel->desired_mode,
+							request->dma
+							+ request->actual,
+							transfer_size))
+
+					return;
+			}
+
+			len = request->length - request->actual;
+			musb_dbg(musb, "%s OUT/RX pio fifo %d/%d, maxpacket %d",
+					musb_ep->end_point.name,
+					fifo_count, len,
+					musb_ep->packet_sz);
+
+			fifo_count = min_t(unsigned, len, fifo_count);
+
+			if (tusb_dma_omap(musb)) {
+				struct dma_controller *c = musb->dma_controller;
+				struct dma_channel *channel = musb_ep->dma;
+				u32 dma_addr = request->dma + request->actual;
+				int ret;
+
+				ret = c->channel_program(channel,
+						musb_ep->packet_sz,
+						channel->desired_mode,
+						dma_addr,
+						fifo_count);
+				if (ret)
+					return;
+			}
+
+			/*
+			 * Unmap the dma buffer back to cpu if dma channel
+			 * programming fails. This buffer is mapped if the
+			 * channel allocation is successful
+			 */
+			unmap_dma_buffer(req, musb);
+
+			/*
+			 * Clear DMAENAB and AUTOCLEAR for the
+			 * PIO mode transfer
+			 */
+			csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR);
+			musb_writew(epio, MUSB_RXCSR, csr);
+
+buffer_aint_mapped:
+			fifo_count = min_t(unsigned int,
+					request->length - request->actual,
+					(unsigned int)fifo_count);
+			musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
+					(request->buf + request->actual));
+			request->actual += fifo_count;
+
+			/* REVISIT if we left anything in the fifo, flush
+			 * it and report -EOVERFLOW
+			 */
+
+			/* ack the read! */
+			csr |= MUSB_RXCSR_P_WZC_BITS;
+			csr &= ~MUSB_RXCSR_RXPKTRDY;
+			musb_writew(epio, MUSB_RXCSR, csr);
+		}
+	}
+
+	/* reach the end or short packet detected */
+	if (request->actual == request->length ||
+	    fifo_count < musb_ep->packet_sz)
+		musb_g_giveback(musb_ep, request, 0);
+}
+
+/*
+ * Data ready for a request; called from IRQ
+ */
+void musb_g_rx(struct musb *musb, u8 epnum)
+{
+	u16			csr;
+	struct musb_request	*req;
+	struct usb_request	*request;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_ep		*musb_ep;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct dma_channel	*dma;
+	struct musb_hw_ep	*hw_ep = &musb->endpoints[epnum];
+
+	if (hw_ep->is_shared_fifo)
+		musb_ep = &hw_ep->ep_in;
+	else
+		musb_ep = &hw_ep->ep_out;
+
+	musb_ep_select(mbase, epnum);
+
+	req = next_request(musb_ep);
+	if (!req)
+		return;
+
+	trace_musb_req_rx(req);
+	request = &req->request;
+
+	csr = musb_readw(epio, MUSB_RXCSR);
+	dma = is_dma_capable() ? musb_ep->dma : NULL;
+
+	musb_dbg(musb, "<== %s, rxcsr %04x%s %p", musb_ep->end_point.name,
+			csr, dma ? " (dma)" : "", request);
+
+	if (csr & MUSB_RXCSR_P_SENTSTALL) {
+		csr |= MUSB_RXCSR_P_WZC_BITS;
+		csr &= ~MUSB_RXCSR_P_SENTSTALL;
+		musb_writew(epio, MUSB_RXCSR, csr);
+		return;
+	}
+
+	if (csr & MUSB_RXCSR_P_OVERRUN) {
+		/* csr |= MUSB_RXCSR_P_WZC_BITS; */
+		csr &= ~MUSB_RXCSR_P_OVERRUN;
+		musb_writew(epio, MUSB_RXCSR, csr);
+
+		musb_dbg(musb, "%s iso overrun on %p", musb_ep->name, request);
+		if (request->status == -EINPROGRESS)
+			request->status = -EOVERFLOW;
+	}
+	if (csr & MUSB_RXCSR_INCOMPRX) {
+		/* REVISIT not necessarily an error */
+		musb_dbg(musb, "%s, incomprx", musb_ep->end_point.name);
+	}
+
+	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+		/* "should not happen"; likely RXPKTRDY pending for DMA */
+		musb_dbg(musb, "%s busy, csr %04x",
+			musb_ep->end_point.name, csr);
+		return;
+	}
+
+	if (dma && (csr & MUSB_RXCSR_DMAENAB)) {
+		csr &= ~(MUSB_RXCSR_AUTOCLEAR
+				| MUSB_RXCSR_DMAENAB
+				| MUSB_RXCSR_DMAMODE);
+		musb_writew(epio, MUSB_RXCSR,
+			MUSB_RXCSR_P_WZC_BITS | csr);
+
+		request->actual += musb_ep->dma->actual_len;
+
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) || \
+	defined(CONFIG_USB_UX500_DMA)
+		/* Autoclear doesn't clear RxPktRdy for short packets */
+		if ((dma->desired_mode == 0 && !hw_ep->rx_double_buffered)
+				|| (dma->actual_len
+					& (musb_ep->packet_sz - 1))) {
+			/* ack the read! */
+			csr &= ~MUSB_RXCSR_RXPKTRDY;
+			musb_writew(epio, MUSB_RXCSR, csr);
+		}
+
+		/* incomplete, and not short? wait for next IN packet */
+		if ((request->actual < request->length)
+				&& (musb_ep->dma->actual_len
+					== musb_ep->packet_sz)) {
+			/* In double buffer case, continue to unload fifo if
+ 			 * there is Rx packet in FIFO.
+ 			 **/
+			csr = musb_readw(epio, MUSB_RXCSR);
+			if ((csr & MUSB_RXCSR_RXPKTRDY) &&
+				hw_ep->rx_double_buffered)
+				goto exit;
+			return;
+		}
+#endif
+		musb_g_giveback(musb_ep, request, 0);
+		/*
+		 * In the giveback function the MUSB lock is
+		 * released and acquired after sometime. During
+		 * this time period the INDEX register could get
+		 * changed by the gadget_queue function especially
+		 * on SMP systems. Reselect the INDEX to be sure
+		 * we are reading/modifying the right registers
+		 */
+		musb_ep_select(mbase, epnum);
+
+		req = next_request(musb_ep);
+		if (!req)
+			return;
+	}
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) || \
+	defined(CONFIG_USB_UX500_DMA)
+exit:
+#endif
+	/* Analyze request */
+	rxstate(musb, req);
+}
+
+/* ------------------------------------------------------------ */
+
+static int musb_gadget_enable(struct usb_ep *ep,
+			const struct usb_endpoint_descriptor *desc)
+{
+	unsigned long		flags;
+	struct musb_ep		*musb_ep;
+	struct musb_hw_ep	*hw_ep;
+	void __iomem		*regs;
+	struct musb		*musb;
+	void __iomem	*mbase;
+	u8		epnum;
+	u16		csr;
+	unsigned	tmp;
+	int		status = -EINVAL;
+
+	if (!ep || !desc)
+		return -EINVAL;
+
+	musb_ep = to_musb_ep(ep);
+	hw_ep = musb_ep->hw_ep;
+	regs = hw_ep->regs;
+	musb = musb_ep->musb;
+	mbase = musb->mregs;
+	epnum = musb_ep->current_epnum;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb_ep->desc) {
+		status = -EBUSY;
+		goto fail;
+	}
+	musb_ep->type = usb_endpoint_type(desc);
+
+	/* check direction and (later) maxpacket size against endpoint */
+	if (usb_endpoint_num(desc) != epnum)
+		goto fail;
+
+	/* REVISIT this rules out high bandwidth periodic transfers */
+	tmp = usb_endpoint_maxp_mult(desc) - 1;
+	if (tmp) {
+		int ok;
+
+		if (usb_endpoint_dir_in(desc))
+			ok = musb->hb_iso_tx;
+		else
+			ok = musb->hb_iso_rx;
+
+		if (!ok) {
+			musb_dbg(musb, "no support for high bandwidth ISO");
+			goto fail;
+		}
+		musb_ep->hb_mult = tmp;
+	} else {
+		musb_ep->hb_mult = 0;
+	}
+
+	musb_ep->packet_sz = usb_endpoint_maxp(desc);
+	tmp = musb_ep->packet_sz * (musb_ep->hb_mult + 1);
+
+	/* enable the interrupts for the endpoint, set the endpoint
+	 * packet size (or fail), set the mode, clear the fifo
+	 */
+	musb_ep_select(mbase, epnum);
+	if (usb_endpoint_dir_in(desc)) {
+
+		if (hw_ep->is_shared_fifo)
+			musb_ep->is_in = 1;
+		if (!musb_ep->is_in)
+			goto fail;
+
+		if (tmp > hw_ep->max_packet_sz_tx) {
+			musb_dbg(musb, "packet size beyond hardware FIFO size");
+			goto fail;
+		}
+
+		musb->intrtxe |= (1 << epnum);
+		musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe);
+
+		/* REVISIT if can_bulk_split(), use by updating "tmp";
+		 * likewise high bandwidth periodic tx
+		 */
+		/* Set TXMAXP with the FIFO size of the endpoint
+		 * to disable double buffering mode.
+		 */
+		if (can_bulk_split(musb, musb_ep->type))
+			musb_ep->hb_mult = (hw_ep->max_packet_sz_tx /
+						musb_ep->packet_sz) - 1;
+		musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
+				| (musb_ep->hb_mult << 11));
+
+		csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
+		if (musb_readw(regs, MUSB_TXCSR)
+				& MUSB_TXCSR_FIFONOTEMPTY)
+			csr |= MUSB_TXCSR_FLUSHFIFO;
+		if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
+			csr |= MUSB_TXCSR_P_ISO;
+
+		/* set twice in case of double buffering */
+		musb_writew(regs, MUSB_TXCSR, csr);
+		/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
+		musb_writew(regs, MUSB_TXCSR, csr);
+
+	} else {
+
+		if (hw_ep->is_shared_fifo)
+			musb_ep->is_in = 0;
+		if (musb_ep->is_in)
+			goto fail;
+
+		if (tmp > hw_ep->max_packet_sz_rx) {
+			musb_dbg(musb, "packet size beyond hardware FIFO size");
+			goto fail;
+		}
+
+		musb->intrrxe |= (1 << epnum);
+		musb_writew(mbase, MUSB_INTRRXE, musb->intrrxe);
+
+		/* REVISIT if can_bulk_combine() use by updating "tmp"
+		 * likewise high bandwidth periodic rx
+		 */
+		/* Set RXMAXP with the FIFO size of the endpoint
+		 * to disable double buffering mode.
+		 */
+		musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
+				| (musb_ep->hb_mult << 11));
+
+		/* force shared fifo to OUT-only mode */
+		if (hw_ep->is_shared_fifo) {
+			csr = musb_readw(regs, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY);
+			musb_writew(regs, MUSB_TXCSR, csr);
+		}
+
+		csr = MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_CLRDATATOG;
+		if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
+			csr |= MUSB_RXCSR_P_ISO;
+		else if (musb_ep->type == USB_ENDPOINT_XFER_INT)
+			csr |= MUSB_RXCSR_DISNYET;
+
+		/* set twice in case of double buffering */
+		musb_writew(regs, MUSB_RXCSR, csr);
+		musb_writew(regs, MUSB_RXCSR, csr);
+	}
+
+	/* NOTE:  all the I/O code _should_ work fine without DMA, in case
+	 * for some reason you run out of channels here.
+	 */
+	if (is_dma_capable() && musb->dma_controller) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		musb_ep->dma = c->channel_alloc(c, hw_ep,
+				(desc->bEndpointAddress & USB_DIR_IN));
+	} else
+		musb_ep->dma = NULL;
+
+	musb_ep->desc = desc;
+	musb_ep->busy = 0;
+	musb_ep->wedged = 0;
+	status = 0;
+
+	pr_debug("%s periph: enabled %s for %s %s, %smaxpacket %d\n",
+			musb_driver_name, musb_ep->end_point.name,
+			musb_ep_xfertype_string(musb_ep->type),
+			musb_ep->is_in ? "IN" : "OUT",
+			musb_ep->dma ? "dma, " : "",
+			musb_ep->packet_sz);
+
+	schedule_delayed_work(&musb->irq_work, 0);
+
+fail:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+/*
+ * Disable an endpoint flushing all requests queued.
+ */
+static int musb_gadget_disable(struct usb_ep *ep)
+{
+	unsigned long	flags;
+	struct musb	*musb;
+	u8		epnum;
+	struct musb_ep	*musb_ep;
+	void __iomem	*epio;
+
+	musb_ep = to_musb_ep(ep);
+	musb = musb_ep->musb;
+	epnum = musb_ep->current_epnum;
+	epio = musb->endpoints[epnum].regs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_ep_select(musb->mregs, epnum);
+
+	/* zero the endpoint sizes */
+	if (musb_ep->is_in) {
+		musb->intrtxe &= ~(1 << epnum);
+		musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe);
+		musb_writew(epio, MUSB_TXMAXP, 0);
+	} else {
+		musb->intrrxe &= ~(1 << epnum);
+		musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe);
+		musb_writew(epio, MUSB_RXMAXP, 0);
+	}
+
+	/* abort all pending DMA and requests */
+	nuke(musb_ep, -ESHUTDOWN);
+
+	musb_ep->desc = NULL;
+	musb_ep->end_point.desc = NULL;
+
+	schedule_delayed_work(&musb->irq_work, 0);
+
+	spin_unlock_irqrestore(&(musb->lock), flags);
+
+	musb_dbg(musb, "%s", musb_ep->end_point.name);
+
+	return 0;
+}
+
+/*
+ * Allocate a request for an endpoint.
+ * Reused by ep0 code.
+ */
+struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	struct musb_request	*request = NULL;
+
+	request = kzalloc(sizeof *request, gfp_flags);
+	if (!request)
+		return NULL;
+
+	request->request.dma = DMA_ADDR_INVALID;
+	request->epnum = musb_ep->current_epnum;
+	request->ep = musb_ep;
+
+	trace_musb_req_alloc(request);
+	return &request->request;
+}
+
+/*
+ * Free a request
+ * Reused by ep0 code.
+ */
+void musb_free_request(struct usb_ep *ep, struct usb_request *req)
+{
+	struct musb_request *request = to_musb_request(req);
+
+	trace_musb_req_free(request);
+	kfree(request);
+}
+
+static LIST_HEAD(buffers);
+
+struct free_record {
+	struct list_head	list;
+	struct device		*dev;
+	unsigned		bytes;
+	dma_addr_t		dma;
+};
+
+/*
+ * Context: controller locked, IRQs blocked.
+ */
+void musb_ep_restart(struct musb *musb, struct musb_request *req)
+{
+	trace_musb_req_start(req);
+	musb_ep_select(musb->mregs, req->epnum);
+	if (req->tx)
+		txstate(musb, req);
+	else
+		rxstate(musb, req);
+}
+
+static int musb_ep_restart_resume_work(struct musb *musb, void *data)
+{
+	struct musb_request *req = data;
+
+	musb_ep_restart(musb, req);
+
+	return 0;
+}
+
+static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
+			gfp_t gfp_flags)
+{
+	struct musb_ep		*musb_ep;
+	struct musb_request	*request;
+	struct musb		*musb;
+	int			status;
+	unsigned long		lockflags;
+
+	if (!ep || !req)
+		return -EINVAL;
+	if (!req->buf)
+		return -ENODATA;
+
+	musb_ep = to_musb_ep(ep);
+	musb = musb_ep->musb;
+
+	request = to_musb_request(req);
+	request->musb = musb;
+
+	if (request->ep != musb_ep)
+		return -EINVAL;
+
+	status = pm_runtime_get(musb->controller);
+	if ((status != -EINPROGRESS) && status < 0) {
+		dev_err(musb->controller,
+			"pm runtime get failed in %s\n",
+			__func__);
+		pm_runtime_put_noidle(musb->controller);
+
+		return status;
+	}
+	status = 0;
+
+	trace_musb_req_enq(request);
+
+	/* request is mine now... */
+	request->request.actual = 0;
+	request->request.status = -EINPROGRESS;
+	request->epnum = musb_ep->current_epnum;
+	request->tx = musb_ep->is_in;
+
+	map_dma_buffer(request, musb, musb_ep);
+
+	spin_lock_irqsave(&musb->lock, lockflags);
+
+	/* don't queue if the ep is down */
+	if (!musb_ep->desc) {
+		musb_dbg(musb, "req %p queued to %s while ep %s",
+				req, ep->name, "disabled");
+		status = -ESHUTDOWN;
+		unmap_dma_buffer(request, musb);
+		goto unlock;
+	}
+
+	/* add request to the list */
+	list_add_tail(&request->list, &musb_ep->req_list);
+
+	/* it this is the head of the queue, start i/o ... */
+	if (!musb_ep->busy && &request->list == musb_ep->req_list.next) {
+		status = musb_queue_resume_work(musb,
+						musb_ep_restart_resume_work,
+						request);
+		if (status < 0) {
+			dev_err(musb->controller, "%s resume work: %i\n",
+				__func__, status);
+			list_del(&request->list);
+		}
+	}
+
+unlock:
+	spin_unlock_irqrestore(&musb->lock, lockflags);
+	pm_runtime_mark_last_busy(musb->controller);
+	pm_runtime_put_autosuspend(musb->controller);
+
+	return status;
+}
+
+static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	struct musb_request	*req = to_musb_request(request);
+	struct musb_request	*r;
+	unsigned long		flags;
+	int			status = 0;
+	struct musb		*musb = musb_ep->musb;
+
+	if (!ep || !request || req->ep != musb_ep)
+		return -EINVAL;
+
+	trace_musb_req_deq(req);
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	list_for_each_entry(r, &musb_ep->req_list, list) {
+		if (r == req)
+			break;
+	}
+	if (r != req) {
+		dev_err(musb->controller, "request %p not queued to %s\n",
+				request, ep->name);
+		status = -EINVAL;
+		goto done;
+	}
+
+	/* if the hardware doesn't have the request, easy ... */
+	if (musb_ep->req_list.next != &req->list || musb_ep->busy)
+		musb_g_giveback(musb_ep, request, -ECONNRESET);
+
+	/* ... else abort the dma transfer ... */
+	else if (is_dma_capable() && musb_ep->dma) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		musb_ep_select(musb->mregs, musb_ep->current_epnum);
+		if (c->channel_abort)
+			status = c->channel_abort(musb_ep->dma);
+		else
+			status = -EBUSY;
+		if (status == 0)
+			musb_g_giveback(musb_ep, request, -ECONNRESET);
+	} else {
+		/* NOTE: by sticking to easily tested hardware/driver states,
+		 * we leave counting of in-flight packets imprecise.
+		 */
+		musb_g_giveback(musb_ep, request, -ECONNRESET);
+	}
+
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+/*
+ * Set or clear the halt bit of an endpoint. A halted endpoint won't tx/rx any
+ * data but will queue requests.
+ *
+ * exported to ep0 code
+ */
+static int musb_gadget_set_halt(struct usb_ep *ep, int value)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	u8			epnum = musb_ep->current_epnum;
+	struct musb		*musb = musb_ep->musb;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	void __iomem		*mbase;
+	unsigned long		flags;
+	u16			csr;
+	struct musb_request	*request;
+	int			status = 0;
+
+	if (!ep)
+		return -EINVAL;
+	mbase = musb->mregs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if ((USB_ENDPOINT_XFER_ISOC == musb_ep->type)) {
+		status = -EINVAL;
+		goto done;
+	}
+
+	musb_ep_select(mbase, epnum);
+
+	request = next_request(musb_ep);
+	if (value) {
+		if (request) {
+			musb_dbg(musb, "request in progress, cannot halt %s",
+			    ep->name);
+			status = -EAGAIN;
+			goto done;
+		}
+		/* Cannot portably stall with non-empty FIFO */
+		if (musb_ep->is_in) {
+			csr = musb_readw(epio, MUSB_TXCSR);
+			if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+				musb_dbg(musb, "FIFO busy, cannot halt %s",
+						ep->name);
+				status = -EAGAIN;
+				goto done;
+			}
+		}
+	} else
+		musb_ep->wedged = 0;
+
+	/* set/clear the stall and toggle bits */
+	musb_dbg(musb, "%s: %s stall", ep->name, value ? "set" : "clear");
+	if (musb_ep->is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		csr |= MUSB_TXCSR_P_WZC_BITS
+			| MUSB_TXCSR_CLRDATATOG;
+		if (value)
+			csr |= MUSB_TXCSR_P_SENDSTALL;
+		else
+			csr &= ~(MUSB_TXCSR_P_SENDSTALL
+				| MUSB_TXCSR_P_SENTSTALL);
+		csr &= ~MUSB_TXCSR_TXPKTRDY;
+		musb_writew(epio, MUSB_TXCSR, csr);
+	} else {
+		csr = musb_readw(epio, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_P_WZC_BITS
+			| MUSB_RXCSR_FLUSHFIFO
+			| MUSB_RXCSR_CLRDATATOG;
+		if (value)
+			csr |= MUSB_RXCSR_P_SENDSTALL;
+		else
+			csr &= ~(MUSB_RXCSR_P_SENDSTALL
+				| MUSB_RXCSR_P_SENTSTALL);
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+	/* maybe start the first request in the queue */
+	if (!musb_ep->busy && !value && request) {
+		musb_dbg(musb, "restarting the request");
+		musb_ep_restart(musb, request);
+	}
+
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+/*
+ * Sets the halt feature with the clear requests ignored
+ */
+static int musb_gadget_set_wedge(struct usb_ep *ep)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+
+	if (!ep)
+		return -EINVAL;
+
+	musb_ep->wedged = 1;
+
+	return usb_ep_set_halt(ep);
+}
+
+static int musb_gadget_fifo_status(struct usb_ep *ep)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	void __iomem		*epio = musb_ep->hw_ep->regs;
+	int			retval = -EINVAL;
+
+	if (musb_ep->desc && !musb_ep->is_in) {
+		struct musb		*musb = musb_ep->musb;
+		int			epnum = musb_ep->current_epnum;
+		void __iomem		*mbase = musb->mregs;
+		unsigned long		flags;
+
+		spin_lock_irqsave(&musb->lock, flags);
+
+		musb_ep_select(mbase, epnum);
+		/* FIXME return zero unless RXPKTRDY is set */
+		retval = musb_readw(epio, MUSB_RXCOUNT);
+
+		spin_unlock_irqrestore(&musb->lock, flags);
+	}
+	return retval;
+}
+
+static void musb_gadget_fifo_flush(struct usb_ep *ep)
+{
+	struct musb_ep	*musb_ep = to_musb_ep(ep);
+	struct musb	*musb = musb_ep->musb;
+	u8		epnum = musb_ep->current_epnum;
+	void __iomem	*epio = musb->endpoints[epnum].regs;
+	void __iomem	*mbase;
+	unsigned long	flags;
+	u16		csr;
+
+	mbase = musb->mregs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_ep_select(mbase, (u8) epnum);
+
+	/* disable interrupts */
+	musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe & ~(1 << epnum));
+
+	if (musb_ep->is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+			csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_P_WZC_BITS;
+			/*
+			 * Setting both TXPKTRDY and FLUSHFIFO makes controller
+			 * to interrupt current FIFO loading, but not flushing
+			 * the already loaded ones.
+			 */
+			csr &= ~MUSB_TXCSR_TXPKTRDY;
+			musb_writew(epio, MUSB_TXCSR, csr);
+			/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
+			musb_writew(epio, MUSB_TXCSR, csr);
+		}
+	} else {
+		csr = musb_readw(epio, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_P_WZC_BITS;
+		musb_writew(epio, MUSB_RXCSR, csr);
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+	/* re-enable interrupt */
+	musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe);
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static const struct usb_ep_ops musb_ep_ops = {
+	.enable		= musb_gadget_enable,
+	.disable	= musb_gadget_disable,
+	.alloc_request	= musb_alloc_request,
+	.free_request	= musb_free_request,
+	.queue		= musb_gadget_queue,
+	.dequeue	= musb_gadget_dequeue,
+	.set_halt	= musb_gadget_set_halt,
+	.set_wedge	= musb_gadget_set_wedge,
+	.fifo_status	= musb_gadget_fifo_status,
+	.fifo_flush	= musb_gadget_fifo_flush
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int musb_gadget_get_frame(struct usb_gadget *gadget)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	return (int)musb_readw(musb->mregs, MUSB_FRAME);
+}
+
+static int musb_gadget_wakeup(struct usb_gadget *gadget)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+	void __iomem	*mregs = musb->mregs;
+	unsigned long	flags;
+	int		status = -EINVAL;
+	u8		power, devctl;
+	int		retries;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_B_PERIPHERAL:
+		/* NOTE:  OTG state machine doesn't include B_SUSPENDED;
+		 * that's part of the standard usb 1.1 state machine, and
+		 * doesn't affect OTG transitions.
+		 */
+		if (musb->may_wakeup && musb->is_suspended)
+			break;
+		goto done;
+	case OTG_STATE_B_IDLE:
+		/* Start SRP ... OTG not required. */
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		musb_dbg(musb, "Sending SRP: devctl: %02x", devctl);
+		devctl |= MUSB_DEVCTL_SESSION;
+		musb_writeb(mregs, MUSB_DEVCTL, devctl);
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		retries = 100;
+		while (!(devctl & MUSB_DEVCTL_SESSION)) {
+			devctl = musb_readb(mregs, MUSB_DEVCTL);
+			if (retries-- < 1)
+				break;
+		}
+		retries = 10000;
+		while (devctl & MUSB_DEVCTL_SESSION) {
+			devctl = musb_readb(mregs, MUSB_DEVCTL);
+			if (retries-- < 1)
+				break;
+		}
+
+		spin_unlock_irqrestore(&musb->lock, flags);
+		otg_start_srp(musb->xceiv->otg);
+		spin_lock_irqsave(&musb->lock, flags);
+
+		/* Block idling for at least 1s */
+		musb_platform_try_idle(musb,
+			jiffies + msecs_to_jiffies(1 * HZ));
+
+		status = 0;
+		goto done;
+	default:
+		musb_dbg(musb, "Unhandled wake: %s",
+			usb_otg_state_string(musb->xceiv->otg->state));
+		goto done;
+	}
+
+	status = 0;
+
+	power = musb_readb(mregs, MUSB_POWER);
+	power |= MUSB_POWER_RESUME;
+	musb_writeb(mregs, MUSB_POWER, power);
+	musb_dbg(musb, "issue wakeup");
+
+	/* FIXME do this next chunk in a timer callback, no udelay */
+	mdelay(2);
+
+	power = musb_readb(mregs, MUSB_POWER);
+	power &= ~MUSB_POWER_RESUME;
+	musb_writeb(mregs, MUSB_POWER, power);
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+static int
+musb_gadget_set_self_powered(struct usb_gadget *gadget, int is_selfpowered)
+{
+	gadget->is_selfpowered = !!is_selfpowered;
+	return 0;
+}
+
+static void musb_pullup(struct musb *musb, int is_on)
+{
+	u8 power;
+
+	power = musb_readb(musb->mregs, MUSB_POWER);
+	if (is_on)
+		power |= MUSB_POWER_SOFTCONN;
+	else
+		power &= ~MUSB_POWER_SOFTCONN;
+
+	/* FIXME if on, HdrcStart; if off, HdrcStop */
+
+	musb_dbg(musb, "gadget D+ pullup %s",
+		is_on ? "on" : "off");
+	musb_writeb(musb->mregs, MUSB_POWER, power);
+}
+
+#if 0
+static int musb_gadget_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	musb_dbg(musb, "<= %s =>\n", __func__);
+
+	/*
+	 * FIXME iff driver's softconnect flag is set (as it is during probe,
+	 * though that can clear it), just musb_pullup().
+	 */
+
+	return -EINVAL;
+}
+#endif
+
+static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	return usb_phy_set_power(musb->xceiv, mA);
+}
+
+static void musb_gadget_work(struct work_struct *work)
+{
+	struct musb *musb;
+	unsigned long flags;
+
+	musb = container_of(work, struct musb, gadget_work.work);
+	pm_runtime_get_sync(musb->controller);
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_pullup(musb, musb->softconnect);
+	spin_unlock_irqrestore(&musb->lock, flags);
+	pm_runtime_mark_last_busy(musb->controller);
+	pm_runtime_put_autosuspend(musb->controller);
+}
+
+static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+	unsigned long	flags;
+
+	is_on = !!is_on;
+
+	/* NOTE: this assumes we are sensing vbus; we'd rather
+	 * not pullup unless the B-session is active.
+	 */
+	spin_lock_irqsave(&musb->lock, flags);
+	if (is_on != musb->softconnect) {
+		musb->softconnect = is_on;
+		schedule_delayed_work(&musb->gadget_work, 0);
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return 0;
+}
+
+static int musb_gadget_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+static int musb_gadget_stop(struct usb_gadget *g);
+
+static const struct usb_gadget_ops musb_gadget_operations = {
+	.get_frame		= musb_gadget_get_frame,
+	.wakeup			= musb_gadget_wakeup,
+	.set_selfpowered	= musb_gadget_set_self_powered,
+	/* .vbus_session		= musb_gadget_vbus_session, */
+	.vbus_draw		= musb_gadget_vbus_draw,
+	.pullup			= musb_gadget_pullup,
+	.udc_start		= musb_gadget_start,
+	.udc_stop		= musb_gadget_stop,
+};
+
+/* ----------------------------------------------------------------------- */
+
+/* Registration */
+
+/* Only this registration code "knows" the rule (from USB standards)
+ * about there being only one external upstream port.  It assumes
+ * all peripheral ports are external...
+ */
+
+static void
+init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
+{
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+
+	memset(ep, 0, sizeof *ep);
+
+	ep->current_epnum = epnum;
+	ep->musb = musb;
+	ep->hw_ep = hw_ep;
+	ep->is_in = is_in;
+
+	INIT_LIST_HEAD(&ep->req_list);
+
+	sprintf(ep->name, "ep%d%s", epnum,
+			(!epnum || hw_ep->is_shared_fifo) ? "" : (
+				is_in ? "in" : "out"));
+	ep->end_point.name = ep->name;
+	INIT_LIST_HEAD(&ep->end_point.ep_list);
+	if (!epnum) {
+		usb_ep_set_maxpacket_limit(&ep->end_point, 64);
+		ep->end_point.caps.type_control = true;
+		ep->end_point.ops = &musb_g_ep0_ops;
+		musb->g.ep0 = &ep->end_point;
+	} else {
+		if (is_in)
+			usb_ep_set_maxpacket_limit(&ep->end_point, hw_ep->max_packet_sz_tx);
+		else
+			usb_ep_set_maxpacket_limit(&ep->end_point, hw_ep->max_packet_sz_rx);
+		ep->end_point.caps.type_iso = true;
+		ep->end_point.caps.type_bulk = true;
+		ep->end_point.caps.type_int = true;
+		ep->end_point.ops = &musb_ep_ops;
+		list_add_tail(&ep->end_point.ep_list, &musb->g.ep_list);
+	}
+
+	if (!epnum || hw_ep->is_shared_fifo) {
+		ep->end_point.caps.dir_in = true;
+		ep->end_point.caps.dir_out = true;
+	} else if (is_in)
+		ep->end_point.caps.dir_in = true;
+	else
+		ep->end_point.caps.dir_out = true;
+}
+
+/*
+ * Initialize the endpoints exposed to peripheral drivers, with backlinks
+ * to the rest of the driver state.
+ */
+static inline void musb_g_init_endpoints(struct musb *musb)
+{
+	u8			epnum;
+	struct musb_hw_ep	*hw_ep;
+	unsigned		count = 0;
+
+	/* initialize endpoint list just once */
+	INIT_LIST_HEAD(&(musb->g.ep_list));
+
+	for (epnum = 0, hw_ep = musb->endpoints;
+			epnum < musb->nr_endpoints;
+			epnum++, hw_ep++) {
+		if (hw_ep->is_shared_fifo /* || !epnum */) {
+			init_peripheral_ep(musb, &hw_ep->ep_in, epnum, 0);
+			count++;
+		} else {
+			if (hw_ep->max_packet_sz_tx) {
+				init_peripheral_ep(musb, &hw_ep->ep_in,
+							epnum, 1);
+				count++;
+			}
+			if (hw_ep->max_packet_sz_rx) {
+				init_peripheral_ep(musb, &hw_ep->ep_out,
+							epnum, 0);
+				count++;
+			}
+		}
+	}
+}
+
+/* called once during driver setup to initialize and link into
+ * the driver model; memory is zeroed.
+ */
+int musb_gadget_setup(struct musb *musb)
+{
+	int status;
+
+	/* REVISIT minor race:  if (erroneously) setting up two
+	 * musb peripherals at the same time, only the bus lock
+	 * is probably held.
+	 */
+
+	musb->g.ops = &musb_gadget_operations;
+	musb->g.max_speed = USB_SPEED_HIGH;
+	musb->g.speed = USB_SPEED_UNKNOWN;
+
+	MUSB_DEV_MODE(musb);
+	musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+
+	/* this "gadget" abstracts/virtualizes the controller */
+	musb->g.name = musb_driver_name;
+	/* don't support otg protocols */
+	musb->g.is_otg = 0;
+	INIT_DELAYED_WORK(&musb->gadget_work, musb_gadget_work);
+	musb_g_init_endpoints(musb);
+
+	musb->is_active = 0;
+	musb_platform_try_idle(musb, 0);
+
+	status = usb_add_gadget_udc(musb->controller, &musb->g);
+	if (status)
+		goto err;
+
+	return 0;
+err:
+	musb->g.dev.parent = NULL;
+	device_unregister(&musb->g.dev);
+	return status;
+}
+
+void musb_gadget_cleanup(struct musb *musb)
+{
+	if (musb->port_mode == MUSB_HOST)
+		return;
+
+	cancel_delayed_work_sync(&musb->gadget_work);
+	usb_del_gadget_udc(&musb->g);
+}
+
+/*
+ * Register the gadget driver. Used by gadget drivers when
+ * registering themselves with the controller.
+ *
+ * -EINVAL something went wrong (not driver)
+ * -EBUSY another gadget is already using the controller
+ * -ENOMEM no memory to perform the operation
+ *
+ * @param driver the gadget driver
+ * @return <0 if error, 0 if everything is fine
+ */
+static int musb_gadget_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct musb		*musb = gadget_to_musb(g);
+	struct usb_otg		*otg = musb->xceiv->otg;
+	unsigned long		flags;
+	int			retval = 0;
+
+	if (driver->max_speed < USB_SPEED_HIGH) {
+		retval = -EINVAL;
+		goto err;
+	}
+
+	pm_runtime_get_sync(musb->controller);
+
+	musb->softconnect = 0;
+	musb->gadget_driver = driver;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb->is_active = 1;
+
+	otg_set_peripheral(otg, &musb->g);
+	musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	musb_start(musb);
+
+	/* REVISIT:  funcall to other code, which also
+	 * handles power budgeting ... this way also
+	 * ensures HdrcStart is indirectly called.
+	 */
+	if (musb->xceiv->last_event == USB_EVENT_ID)
+		musb_platform_set_vbus(musb, 1);
+
+	pm_runtime_mark_last_busy(musb->controller);
+	pm_runtime_put_autosuspend(musb->controller);
+
+	return 0;
+
+err:
+	return retval;
+}
+
+/*
+ * Unregister the gadget driver. Used by gadget drivers when
+ * unregistering themselves from the controller.
+ *
+ * @param driver the gadget driver to unregister
+ */
+static int musb_gadget_stop(struct usb_gadget *g)
+{
+	struct musb	*musb = gadget_to_musb(g);
+	unsigned long	flags;
+
+	pm_runtime_get_sync(musb->controller);
+
+	/*
+	 * REVISIT always use otg_set_peripheral() here too;
+	 * this needs to shut down the OTG engine.
+	 */
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	musb_hnp_stop(musb);
+
+	(void) musb_gadget_vbus_draw(&musb->g, 0);
+
+	musb->xceiv->otg->state = OTG_STATE_UNDEFINED;
+	musb_stop(musb);
+	otg_set_peripheral(musb->xceiv->otg, NULL);
+
+	musb->is_active = 0;
+	musb->gadget_driver = NULL;
+	musb_platform_try_idle(musb, 0);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	/*
+	 * FIXME we need to be able to register another
+	 * gadget driver here and have everything work;
+	 * that currently misbehaves.
+	 */
+
+	/* Force check of devctl register for PM runtime */
+	pm_runtime_mark_last_busy(musb->controller);
+	pm_runtime_put_autosuspend(musb->controller);
+
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* lifecycle operations called through plat_uds.c */
+
+void musb_g_resume(struct musb *musb)
+{
+	musb->is_suspended = 0;
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_B_IDLE:
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+	case OTG_STATE_B_PERIPHERAL:
+		musb->is_active = 1;
+		if (musb->gadget_driver && musb->gadget_driver->resume) {
+			spin_unlock(&musb->lock);
+			musb->gadget_driver->resume(&musb->g);
+			spin_lock(&musb->lock);
+		}
+		break;
+	default:
+		WARNING("unhandled RESUME transition (%s)\n",
+				usb_otg_state_string(musb->xceiv->otg->state));
+	}
+}
+
+/* called when SOF packets stop for 3+ msec */
+void musb_g_suspend(struct musb *musb)
+{
+	u8	devctl;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+	musb_dbg(musb, "musb_g_suspend: devctl %02x", devctl);
+
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_B_IDLE:
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		musb->is_suspended = 1;
+		if (musb->gadget_driver && musb->gadget_driver->suspend) {
+			spin_unlock(&musb->lock);
+			musb->gadget_driver->suspend(&musb->g);
+			spin_lock(&musb->lock);
+		}
+		break;
+	default:
+		/* REVISIT if B_HOST, clear DEVCTL.HOSTREQ;
+		 * A_PERIPHERAL may need care too
+		 */
+		WARNING("unhandled SUSPEND transition (%s)",
+				usb_otg_state_string(musb->xceiv->otg->state));
+	}
+}
+
+/* Called during SRP */
+void musb_g_wakeup(struct musb *musb)
+{
+	musb_gadget_wakeup(&musb->g);
+}
+
+/* called when VBUS drops below session threshold, and in other cases */
+void musb_g_disconnect(struct musb *musb)
+{
+	void __iomem	*mregs = musb->mregs;
+	u8	devctl = musb_readb(mregs, MUSB_DEVCTL);
+
+	musb_dbg(musb, "musb_g_disconnect: devctl %02x", devctl);
+
+	/* clear HR */
+	musb_writeb(mregs, MUSB_DEVCTL, devctl & MUSB_DEVCTL_SESSION);
+
+	/* don't draw vbus until new b-default session */
+	(void) musb_gadget_vbus_draw(&musb->g, 0);
+
+	musb->g.speed = USB_SPEED_UNKNOWN;
+	if (musb->gadget_driver && musb->gadget_driver->disconnect) {
+		spin_unlock(&musb->lock);
+		musb->gadget_driver->disconnect(&musb->g);
+		spin_lock(&musb->lock);
+	}
+
+	switch (musb->xceiv->otg->state) {
+	default:
+		musb_dbg(musb, "Unhandled disconnect %s, setting a_idle",
+			usb_otg_state_string(musb->xceiv->otg->state));
+		musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+		MUSB_HST_MODE(musb);
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
+		MUSB_HST_MODE(musb);
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+	case OTG_STATE_B_HOST:
+	case OTG_STATE_B_PERIPHERAL:
+	case OTG_STATE_B_IDLE:
+		musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+		break;
+	case OTG_STATE_B_SRP_INIT:
+		break;
+	}
+
+	musb->is_active = 0;
+}
+
+void musb_g_reset(struct musb *musb)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	void __iomem	*mbase = musb->mregs;
+	u8		devctl = musb_readb(mbase, MUSB_DEVCTL);
+	u8		power;
+
+	musb_dbg(musb, "<== %s driver '%s'",
+			(devctl & MUSB_DEVCTL_BDEVICE)
+				? "B-Device" : "A-Device",
+			musb->gadget_driver
+				? musb->gadget_driver->driver.name
+				: NULL
+			);
+
+	/* report reset, if we didn't already (flushing EP state) */
+	if (musb->gadget_driver && musb->g.speed != USB_SPEED_UNKNOWN) {
+		spin_unlock(&musb->lock);
+		usb_gadget_udc_reset(&musb->g, musb->gadget_driver);
+		spin_lock(&musb->lock);
+	}
+
+	/* clear HR */
+	else if (devctl & MUSB_DEVCTL_HR)
+		musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+
+
+	/* what speed did we negotiate? */
+	power = musb_readb(mbase, MUSB_POWER);
+	musb->g.speed = (power & MUSB_POWER_HSMODE)
+			? USB_SPEED_HIGH : USB_SPEED_FULL;
+
+	/* start in USB_STATE_DEFAULT */
+	musb->is_active = 1;
+	musb->is_suspended = 0;
+	MUSB_DEV_MODE(musb);
+	musb->address = 0;
+	musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+
+	musb->may_wakeup = 0;
+	musb->g.b_hnp_enable = 0;
+	musb->g.a_alt_hnp_support = 0;
+	musb->g.a_hnp_support = 0;
+	musb->g.quirk_zlp_not_supp = 1;
+
+	/* Normal reset, as B-Device;
+	 * or else after HNP, as A-Device
+	 */
+	if (!musb->g.is_otg) {
+		/* USB device controllers that are not OTG compatible
+		 * may not have DEVCTL register in silicon.
+		 * In that case, do not rely on devctl for setting
+		 * peripheral mode.
+		 */
+		musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
+		musb->g.is_a_peripheral = 0;
+	} else if (devctl & MUSB_DEVCTL_BDEVICE) {
+		musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
+		musb->g.is_a_peripheral = 0;
+	} else {
+		musb->xceiv->otg->state = OTG_STATE_A_PERIPHERAL;
+		musb->g.is_a_peripheral = 1;
+	}
+
+	/* start with default limits on VBUS power draw */
+	(void) musb_gadget_vbus_draw(&musb->g, 8);
+}
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
new file mode 100644
index 000000000..f49f25b3b
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * MUSB OTG driver peripheral defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ */
+
+#ifndef __MUSB_GADGET_H
+#define __MUSB_GADGET_H
+
+#include <linux/list.h>
+
+#if IS_ENABLED(CONFIG_USB_MUSB_GADGET) || IS_ENABLED(CONFIG_USB_MUSB_DUAL_ROLE)
+extern irqreturn_t musb_g_ep0_irq(struct musb *);
+extern void musb_g_tx(struct musb *, u8);
+extern void musb_g_rx(struct musb *, u8);
+extern void musb_g_reset(struct musb *);
+extern void musb_g_suspend(struct musb *);
+extern void musb_g_resume(struct musb *);
+extern void musb_g_wakeup(struct musb *);
+extern void musb_g_disconnect(struct musb *);
+extern void musb_gadget_cleanup(struct musb *);
+extern int musb_gadget_setup(struct musb *);
+
+#else
+static inline irqreturn_t musb_g_ep0_irq(struct musb *musb)
+{
+	return 0;
+}
+
+static inline void musb_g_tx(struct musb *musb, u8 epnum)	{}
+static inline void musb_g_rx(struct musb *musb, u8 epnum)	{}
+static inline void musb_g_reset(struct musb *musb)		{}
+static inline void musb_g_suspend(struct musb *musb)		{}
+static inline void musb_g_resume(struct musb *musb)		{}
+static inline void musb_g_wakeup(struct musb *musb)		{}
+static inline void musb_g_disconnect(struct musb *musb)		{}
+static inline void musb_gadget_cleanup(struct musb *musb)	{}
+static inline int musb_gadget_setup(struct musb *musb)
+{
+	return 0;
+}
+#endif
+
+enum buffer_map_state {
+	UN_MAPPED = 0,
+	PRE_MAPPED,
+	MUSB_MAPPED
+};
+
+struct musb_request {
+	struct usb_request	request;
+	struct list_head	list;
+	struct musb_ep		*ep;
+	struct musb		*musb;
+	u8 tx;			/* endpoint direction */
+	u8 epnum;
+	enum buffer_map_state map_state;
+};
+
+#define to_musb_request(r)	container_of((r), struct musb_request, request)
+
+extern struct usb_request *
+musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags);
+extern void musb_free_request(struct usb_ep *ep, struct usb_request *req);
+
+
+/*
+ * struct musb_ep - peripheral side view of endpoint rx or tx side
+ */
+struct musb_ep {
+	/* stuff towards the head is basically write-once. */
+	struct usb_ep			end_point;
+	char				name[12];
+	struct musb_hw_ep		*hw_ep;
+	struct musb			*musb;
+	u8				current_epnum;
+
+	/* ... when enabled/disabled ... */
+	u8				type;
+	u8				is_in;
+	u16				packet_sz;
+	const struct usb_endpoint_descriptor	*desc;
+	struct dma_channel		*dma;
+
+	/* later things are modified based on usage */
+	struct list_head		req_list;
+
+	u8				wedged;
+
+	/* true if lock must be dropped but req_list may not be advanced */
+	u8				busy;
+
+	u8				hb_mult;
+};
+
+#define to_musb_ep(ep)	container_of((ep), struct musb_ep, end_point)
+
+static inline struct musb_request *next_request(struct musb_ep *ep)
+{
+	struct list_head	*queue = &ep->req_list;
+
+	if (list_empty(queue))
+		return NULL;
+	return container_of(queue->next, struct musb_request, list);
+}
+
+extern const struct usb_ep_ops musb_g_ep0_ops;
+
+extern void musb_g_giveback(struct musb_ep *, struct usb_request *, int);
+
+extern void musb_ep_restart(struct musb *, struct musb_request *);
+
+#endif		/* __MUSB_GADGET_H */
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
new file mode 100644
index 000000000..6d7336727
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -0,0 +1,1058 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MUSB OTG peripheral driver ep0 handling
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+
+#include "musb_core.h"
+
+/* ep0 is always musb->endpoints[0].ep_in */
+#define	next_ep0_request(musb)	next_in_request(&(musb)->endpoints[0])
+
+/*
+ * locking note:  we use only the controller lock, for simpler correctness.
+ * It's always held with IRQs blocked.
+ *
+ * It protects the ep0 request queue as well as ep0_state, not just the
+ * controller and indexed registers.  And that lock stays held unless it
+ * needs to be dropped to allow reentering this driver ... like upcalls to
+ * the gadget driver, or adjusting endpoint halt status.
+ */
+
+static char *decode_ep0stage(u8 stage)
+{
+	switch (stage) {
+	case MUSB_EP0_STAGE_IDLE:	return "idle";
+	case MUSB_EP0_STAGE_SETUP:	return "setup";
+	case MUSB_EP0_STAGE_TX:		return "in";
+	case MUSB_EP0_STAGE_RX:		return "out";
+	case MUSB_EP0_STAGE_ACKWAIT:	return "wait";
+	case MUSB_EP0_STAGE_STATUSIN:	return "in/status";
+	case MUSB_EP0_STAGE_STATUSOUT:	return "out/status";
+	default:			return "?";
+	}
+}
+
+/* handle a standard GET_STATUS request
+ * Context:  caller holds controller lock
+ */
+static int service_tx_status_request(
+	struct musb *musb,
+	const struct usb_ctrlrequest *ctrlrequest)
+{
+	void __iomem	*mbase = musb->mregs;
+	int handled = 1;
+	u8 result[2], epnum = 0;
+	const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
+
+	result[1] = 0;
+
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		result[0] = musb->g.is_selfpowered << USB_DEVICE_SELF_POWERED;
+		result[0] |= musb->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+		if (musb->g.is_otg) {
+			result[0] |= musb->g.b_hnp_enable
+				<< USB_DEVICE_B_HNP_ENABLE;
+			result[0] |= musb->g.a_alt_hnp_support
+				<< USB_DEVICE_A_ALT_HNP_SUPPORT;
+			result[0] |= musb->g.a_hnp_support
+				<< USB_DEVICE_A_HNP_SUPPORT;
+		}
+		break;
+
+	case USB_RECIP_INTERFACE:
+		result[0] = 0;
+		break;
+
+	case USB_RECIP_ENDPOINT: {
+		int		is_in;
+		struct musb_ep	*ep;
+		u16		tmp;
+		void __iomem	*regs;
+
+		epnum = (u8) ctrlrequest->wIndex;
+		if (!epnum) {
+			result[0] = 0;
+			break;
+		}
+
+		is_in = epnum & USB_DIR_IN;
+		epnum &= 0x0f;
+		if (epnum >= MUSB_C_NUM_EPS) {
+			handled = -EINVAL;
+			break;
+		}
+
+		if (is_in)
+			ep = &musb->endpoints[epnum].ep_in;
+		else
+			ep = &musb->endpoints[epnum].ep_out;
+		regs = musb->endpoints[epnum].regs;
+
+		if (!ep->desc) {
+			handled = -EINVAL;
+			break;
+		}
+
+		musb_ep_select(mbase, epnum);
+		if (is_in)
+			tmp = musb_readw(regs, MUSB_TXCSR)
+						& MUSB_TXCSR_P_SENDSTALL;
+		else
+			tmp = musb_readw(regs, MUSB_RXCSR)
+						& MUSB_RXCSR_P_SENDSTALL;
+		musb_ep_select(mbase, 0);
+
+		result[0] = tmp ? 1 : 0;
+		} break;
+
+	default:
+		/* class, vendor, etc ... delegate */
+		handled = 0;
+		break;
+	}
+
+	/* fill up the fifo; caller updates csr0 */
+	if (handled > 0) {
+		u16	len = le16_to_cpu(ctrlrequest->wLength);
+
+		if (len > 2)
+			len = 2;
+		musb_write_fifo(&musb->endpoints[0], len, result);
+	}
+
+	return handled;
+}
+
+/*
+ * handle a control-IN request, the end0 buffer contains the current request
+ * that is supposed to be a standard control request. Assumes the fifo to
+ * be at least 2 bytes long.
+ *
+ * @return 0 if the request was NOT HANDLED,
+ * < 0 when error
+ * > 0 when the request is processed
+ *
+ * Context:  caller holds controller lock
+ */
+static int
+service_in_request(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
+{
+	int handled = 0;	/* not handled */
+
+	if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
+			== USB_TYPE_STANDARD) {
+		switch (ctrlrequest->bRequest) {
+		case USB_REQ_GET_STATUS:
+			handled = service_tx_status_request(musb,
+					ctrlrequest);
+			break;
+
+		/* case USB_REQ_SYNC_FRAME: */
+
+		default:
+			break;
+		}
+	}
+	return handled;
+}
+
+/*
+ * Context:  caller holds controller lock
+ */
+static void musb_g_ep0_giveback(struct musb *musb, struct usb_request *req)
+{
+	musb_g_giveback(&musb->endpoints[0].ep_in, req, 0);
+}
+
+/*
+ * Tries to start B-device HNP negotiation if enabled via sysfs
+ */
+static inline void musb_try_b_hnp_enable(struct musb *musb)
+{
+	void __iomem	*mbase = musb->mregs;
+	u8		devctl;
+
+	musb_dbg(musb, "HNP: Setting HR");
+	devctl = musb_readb(mbase, MUSB_DEVCTL);
+	musb_writeb(mbase, MUSB_DEVCTL, devctl | MUSB_DEVCTL_HR);
+}
+
+/*
+ * Handle all control requests with no DATA stage, including standard
+ * requests such as:
+ * USB_REQ_SET_CONFIGURATION, USB_REQ_SET_INTERFACE, unrecognized
+ *	always delegated to the gadget driver
+ * USB_REQ_SET_ADDRESS, USB_REQ_CLEAR_FEATURE, USB_REQ_SET_FEATURE
+ *	always handled here, except for class/vendor/... features
+ *
+ * Context:  caller holds controller lock
+ */
+static int
+service_zero_data_request(struct musb *musb,
+		struct usb_ctrlrequest *ctrlrequest)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	int handled = -EINVAL;
+	void __iomem *mbase = musb->mregs;
+	const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
+
+	/* the gadget driver handles everything except what we MUST handle */
+	if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
+			== USB_TYPE_STANDARD) {
+		switch (ctrlrequest->bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			/* change it after the status stage */
+			musb->set_address = true;
+			musb->address = (u8) (ctrlrequest->wValue & 0x7f);
+			handled = 1;
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+			switch (recip) {
+			case USB_RECIP_DEVICE:
+				if (ctrlrequest->wValue
+						!= USB_DEVICE_REMOTE_WAKEUP)
+					break;
+				musb->may_wakeup = 0;
+				handled = 1;
+				break;
+			case USB_RECIP_INTERFACE:
+				break;
+			case USB_RECIP_ENDPOINT:{
+				const u8		epnum =
+					ctrlrequest->wIndex & 0x0f;
+				struct musb_ep		*musb_ep;
+				struct musb_hw_ep	*ep;
+				struct musb_request	*request;
+				void __iomem		*regs;
+				int			is_in;
+				u16			csr;
+
+				if (epnum == 0 || epnum >= MUSB_C_NUM_EPS ||
+				    ctrlrequest->wValue != USB_ENDPOINT_HALT)
+					break;
+
+				ep = musb->endpoints + epnum;
+				regs = ep->regs;
+				is_in = ctrlrequest->wIndex & USB_DIR_IN;
+				if (is_in)
+					musb_ep = &ep->ep_in;
+				else
+					musb_ep = &ep->ep_out;
+				if (!musb_ep->desc)
+					break;
+
+				handled = 1;
+				/* Ignore request if endpoint is wedged */
+				if (musb_ep->wedged)
+					break;
+
+				musb_ep_select(mbase, epnum);
+				if (is_in) {
+					csr  = musb_readw(regs, MUSB_TXCSR);
+					csr |= MUSB_TXCSR_CLRDATATOG |
+					       MUSB_TXCSR_P_WZC_BITS;
+					csr &= ~(MUSB_TXCSR_P_SENDSTALL |
+						 MUSB_TXCSR_P_SENTSTALL |
+						 MUSB_TXCSR_TXPKTRDY);
+					musb_writew(regs, MUSB_TXCSR, csr);
+				} else {
+					csr  = musb_readw(regs, MUSB_RXCSR);
+					csr |= MUSB_RXCSR_CLRDATATOG |
+					       MUSB_RXCSR_P_WZC_BITS;
+					csr &= ~(MUSB_RXCSR_P_SENDSTALL |
+						 MUSB_RXCSR_P_SENTSTALL);
+					musb_writew(regs, MUSB_RXCSR, csr);
+				}
+
+				/* Maybe start the first request in the queue */
+				request = next_request(musb_ep);
+				if (!musb_ep->busy && request) {
+					musb_dbg(musb, "restarting the request");
+					musb_ep_restart(musb, request);
+				}
+
+				/* select ep0 again */
+				musb_ep_select(mbase, 0);
+				} break;
+			default:
+				/* class, vendor, etc ... delegate */
+				handled = 0;
+				break;
+			}
+			break;
+
+		case USB_REQ_SET_FEATURE:
+			switch (recip) {
+			case USB_RECIP_DEVICE:
+				handled = 1;
+				switch (ctrlrequest->wValue) {
+				case USB_DEVICE_REMOTE_WAKEUP:
+					musb->may_wakeup = 1;
+					break;
+				case USB_DEVICE_TEST_MODE:
+					if (musb->g.speed != USB_SPEED_HIGH)
+						goto stall;
+					if (ctrlrequest->wIndex & 0xff)
+						goto stall;
+
+					switch (ctrlrequest->wIndex >> 8) {
+					case USB_TEST_J:
+						pr_debug("USB_TEST_J\n");
+						musb->test_mode_nr =
+							MUSB_TEST_J;
+						break;
+					case USB_TEST_K:
+						pr_debug("USB_TEST_K\n");
+						musb->test_mode_nr =
+							MUSB_TEST_K;
+						break;
+					case USB_TEST_SE0_NAK:
+						pr_debug("USB_TEST_SE0_NAK\n");
+						musb->test_mode_nr =
+							MUSB_TEST_SE0_NAK;
+						break;
+					case USB_TEST_PACKET:
+						pr_debug("USB_TEST_PACKET\n");
+						musb->test_mode_nr =
+							MUSB_TEST_PACKET;
+						break;
+
+					case 0xc0:
+						/* TEST_FORCE_HS */
+						pr_debug("TEST_FORCE_HS\n");
+						musb->test_mode_nr =
+							MUSB_TEST_FORCE_HS;
+						break;
+					case 0xc1:
+						/* TEST_FORCE_FS */
+						pr_debug("TEST_FORCE_FS\n");
+						musb->test_mode_nr =
+							MUSB_TEST_FORCE_FS;
+						break;
+					case 0xc2:
+						/* TEST_FIFO_ACCESS */
+						pr_debug("TEST_FIFO_ACCESS\n");
+						musb->test_mode_nr =
+							MUSB_TEST_FIFO_ACCESS;
+						break;
+					case 0xc3:
+						/* TEST_FORCE_HOST */
+						pr_debug("TEST_FORCE_HOST\n");
+						musb->test_mode_nr =
+							MUSB_TEST_FORCE_HOST;
+						break;
+					default:
+						goto stall;
+					}
+
+					/* enter test mode after irq */
+					if (handled > 0)
+						musb->test_mode = true;
+					break;
+				case USB_DEVICE_B_HNP_ENABLE:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.b_hnp_enable = 1;
+					musb_try_b_hnp_enable(musb);
+					break;
+				case USB_DEVICE_A_HNP_SUPPORT:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.a_hnp_support = 1;
+					break;
+				case USB_DEVICE_A_ALT_HNP_SUPPORT:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.a_alt_hnp_support = 1;
+					break;
+				case USB_DEVICE_DEBUG_MODE:
+					handled = 0;
+					break;
+stall:
+				default:
+					handled = -EINVAL;
+					break;
+				}
+				break;
+
+			case USB_RECIP_INTERFACE:
+				break;
+
+			case USB_RECIP_ENDPOINT:{
+				const u8		epnum =
+					ctrlrequest->wIndex & 0x0f;
+				struct musb_ep		*musb_ep;
+				struct musb_hw_ep	*ep;
+				void __iomem		*regs;
+				int			is_in;
+				u16			csr;
+
+				if (epnum == 0 || epnum >= MUSB_C_NUM_EPS ||
+				    ctrlrequest->wValue	!= USB_ENDPOINT_HALT)
+					break;
+
+				ep = musb->endpoints + epnum;
+				regs = ep->regs;
+				is_in = ctrlrequest->wIndex & USB_DIR_IN;
+				if (is_in)
+					musb_ep = &ep->ep_in;
+				else
+					musb_ep = &ep->ep_out;
+				if (!musb_ep->desc)
+					break;
+
+				musb_ep_select(mbase, epnum);
+				if (is_in) {
+					csr = musb_readw(regs, MUSB_TXCSR);
+					if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+						csr |= MUSB_TXCSR_FLUSHFIFO;
+					csr |= MUSB_TXCSR_P_SENDSTALL
+						| MUSB_TXCSR_CLRDATATOG
+						| MUSB_TXCSR_P_WZC_BITS;
+					musb_writew(regs, MUSB_TXCSR, csr);
+				} else {
+					csr = musb_readw(regs, MUSB_RXCSR);
+					csr |= MUSB_RXCSR_P_SENDSTALL
+						| MUSB_RXCSR_FLUSHFIFO
+						| MUSB_RXCSR_CLRDATATOG
+						| MUSB_RXCSR_P_WZC_BITS;
+					musb_writew(regs, MUSB_RXCSR, csr);
+				}
+
+				/* select ep0 again */
+				musb_ep_select(mbase, 0);
+				handled = 1;
+				} break;
+
+			default:
+				/* class, vendor, etc ... delegate */
+				handled = 0;
+				break;
+			}
+			break;
+		default:
+			/* delegate SET_CONFIGURATION, etc */
+			handled = 0;
+		}
+	} else
+		handled = 0;
+	return handled;
+}
+
+/* we have an ep0out data packet
+ * Context:  caller holds controller lock
+ */
+static void ep0_rxstate(struct musb *musb)
+{
+	void __iomem		*regs = musb->control_ep->regs;
+	struct musb_request	*request;
+	struct usb_request	*req;
+	u16			count, csr;
+
+	request = next_ep0_request(musb);
+	req = &request->request;
+
+	/* read packet and ack; or stall because of gadget driver bug:
+	 * should have provided the rx buffer before setup() returned.
+	 */
+	if (req) {
+		void		*buf = req->buf + req->actual;
+		unsigned	len = req->length - req->actual;
+
+		/* read the buffer */
+		count = musb_readb(regs, MUSB_COUNT0);
+		if (count > len) {
+			req->status = -EOVERFLOW;
+			count = len;
+		}
+		if (count > 0) {
+			musb_read_fifo(&musb->endpoints[0], count, buf);
+			req->actual += count;
+		}
+		csr = MUSB_CSR0_P_SVDRXPKTRDY;
+		if (count < 64 || req->actual == req->length) {
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+			csr |= MUSB_CSR0_P_DATAEND;
+		} else
+			req = NULL;
+	} else
+		csr = MUSB_CSR0_P_SVDRXPKTRDY | MUSB_CSR0_P_SENDSTALL;
+
+
+	/* Completion handler may choose to stall, e.g. because the
+	 * message just received holds invalid data.
+	 */
+	if (req) {
+		musb->ackpend = csr;
+		musb_g_ep0_giveback(musb, req);
+		if (!musb->ackpend)
+			return;
+		musb->ackpend = 0;
+	}
+	musb_ep_select(musb->mregs, 0);
+	musb_writew(regs, MUSB_CSR0, csr);
+}
+
+/*
+ * transmitting to the host (IN), this code might be called from IRQ
+ * and from kernel thread.
+ *
+ * Context:  caller holds controller lock
+ */
+static void ep0_txstate(struct musb *musb)
+{
+	void __iomem		*regs = musb->control_ep->regs;
+	struct musb_request	*req = next_ep0_request(musb);
+	struct usb_request	*request;
+	u16			csr = MUSB_CSR0_TXPKTRDY;
+	u8			*fifo_src;
+	u8			fifo_count;
+
+	if (!req) {
+		/* WARN_ON(1); */
+		musb_dbg(musb, "odd; csr0 %04x", musb_readw(regs, MUSB_CSR0));
+		return;
+	}
+
+	request = &req->request;
+
+	/* load the data */
+	fifo_src = (u8 *) request->buf + request->actual;
+	fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE,
+		request->length - request->actual);
+	musb_write_fifo(&musb->endpoints[0], fifo_count, fifo_src);
+	request->actual += fifo_count;
+
+	/* update the flags */
+	if (fifo_count < MUSB_MAX_END0_PACKET
+			|| (request->actual == request->length
+				&& !request->zero)) {
+		musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
+		csr |= MUSB_CSR0_P_DATAEND;
+	} else
+		request = NULL;
+
+	/* report completions as soon as the fifo's loaded; there's no
+	 * win in waiting till this last packet gets acked.  (other than
+	 * very precise fault reporting, needed by USB TMC; possible with
+	 * this hardware, but not usable from portable gadget drivers.)
+	 */
+	if (request) {
+		musb->ackpend = csr;
+		musb_g_ep0_giveback(musb, request);
+		if (!musb->ackpend)
+			return;
+		musb->ackpend = 0;
+	}
+
+	/* send it out, triggering a "txpktrdy cleared" irq */
+	musb_ep_select(musb->mregs, 0);
+	musb_writew(regs, MUSB_CSR0, csr);
+}
+
+/*
+ * Read a SETUP packet (struct usb_ctrlrequest) from the hardware.
+ * Fields are left in USB byte-order.
+ *
+ * Context:  caller holds controller lock.
+ */
+static void
+musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req)
+{
+	struct musb_request	*r;
+	void __iomem		*regs = musb->control_ep->regs;
+
+	musb_read_fifo(&musb->endpoints[0], sizeof *req, (u8 *)req);
+
+	/* NOTE:  earlier 2.6 versions changed setup packets to host
+	 * order, but now USB packets always stay in USB byte order.
+	 */
+	musb_dbg(musb, "SETUP req%02x.%02x v%04x i%04x l%d",
+		req->bRequestType,
+		req->bRequest,
+		le16_to_cpu(req->wValue),
+		le16_to_cpu(req->wIndex),
+		le16_to_cpu(req->wLength));
+
+	/* clean up any leftover transfers */
+	r = next_ep0_request(musb);
+	if (r)
+		musb_g_ep0_giveback(musb, &r->request);
+
+	/* For zero-data requests we want to delay the STATUS stage to
+	 * avoid SETUPEND errors.  If we read data (OUT), delay accepting
+	 * packets until there's a buffer to store them in.
+	 *
+	 * If we write data, the controller acts happier if we enable
+	 * the TX FIFO right away, and give the controller a moment
+	 * to switch modes...
+	 */
+	musb->set_address = false;
+	musb->ackpend = MUSB_CSR0_P_SVDRXPKTRDY;
+	if (req->wLength == 0) {
+		if (req->bRequestType & USB_DIR_IN)
+			musb->ackpend |= MUSB_CSR0_TXPKTRDY;
+		musb->ep0_state = MUSB_EP0_STAGE_ACKWAIT;
+	} else if (req->bRequestType & USB_DIR_IN) {
+		musb->ep0_state = MUSB_EP0_STAGE_TX;
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDRXPKTRDY);
+		while ((musb_readw(regs, MUSB_CSR0)
+				& MUSB_CSR0_RXPKTRDY) != 0)
+			cpu_relax();
+		musb->ackpend = 0;
+	} else
+		musb->ep0_state = MUSB_EP0_STAGE_RX;
+}
+
+static int
+forward_to_driver(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	int retval;
+	if (!musb->gadget_driver)
+		return -EOPNOTSUPP;
+	spin_unlock(&musb->lock);
+	retval = musb->gadget_driver->setup(&musb->g, ctrlrequest);
+	spin_lock(&musb->lock);
+	return retval;
+}
+
+/*
+ * Handle peripheral ep0 interrupt
+ *
+ * Context: irq handler; we won't re-enter the driver that way.
+ */
+irqreturn_t musb_g_ep0_irq(struct musb *musb)
+{
+	u16		csr;
+	u16		len;
+	void __iomem	*mbase = musb->mregs;
+	void __iomem	*regs = musb->endpoints[0].regs;
+	irqreturn_t	retval = IRQ_NONE;
+
+	musb_ep_select(mbase, 0);	/* select ep0 */
+	csr = musb_readw(regs, MUSB_CSR0);
+	len = musb_readb(regs, MUSB_COUNT0);
+
+	musb_dbg(musb, "csr %04x, count %d, ep0stage %s",
+			csr, len, decode_ep0stage(musb->ep0_state));
+
+	if (csr & MUSB_CSR0_P_DATAEND) {
+		/*
+		 * If DATAEND is set we should not call the callback,
+		 * hence the status stage is not complete.
+		 */
+		return IRQ_HANDLED;
+	}
+
+	/* I sent a stall.. need to acknowledge it now.. */
+	if (csr & MUSB_CSR0_P_SENTSTALL) {
+		musb_writew(regs, MUSB_CSR0,
+				csr & ~MUSB_CSR0_P_SENTSTALL);
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_IDLE;
+		csr = musb_readw(regs, MUSB_CSR0);
+	}
+
+	/* request ended "early" */
+	if (csr & MUSB_CSR0_P_SETUPEND) {
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDSETUPEND);
+		retval = IRQ_HANDLED;
+		/* Transition into the early status phase */
+		switch (musb->ep0_state) {
+		case MUSB_EP0_STAGE_TX:
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
+			break;
+		case MUSB_EP0_STAGE_RX:
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+			break;
+		default:
+			ERR("SetupEnd came in a wrong ep0stage %s\n",
+			    decode_ep0stage(musb->ep0_state));
+		}
+		csr = musb_readw(regs, MUSB_CSR0);
+		/* NOTE:  request may need completion */
+	}
+
+	/* docs from Mentor only describe tx, rx, and idle/setup states.
+	 * we need to handle nuances around status stages, and also the
+	 * case where status and setup stages come back-to-back ...
+	 */
+	switch (musb->ep0_state) {
+
+	case MUSB_EP0_STAGE_TX:
+		/* irq on clearing txpktrdy */
+		if ((csr & MUSB_CSR0_TXPKTRDY) == 0) {
+			ep0_txstate(musb);
+			retval = IRQ_HANDLED;
+		}
+		break;
+
+	case MUSB_EP0_STAGE_RX:
+		/* irq on set rxpktrdy */
+		if (csr & MUSB_CSR0_RXPKTRDY) {
+			ep0_rxstate(musb);
+			retval = IRQ_HANDLED;
+		}
+		break;
+
+	case MUSB_EP0_STAGE_STATUSIN:
+		/* end of sequence #2 (OUT/RX state) or #3 (no data) */
+
+		/* update address (if needed) only @ the end of the
+		 * status phase per usb spec, which also guarantees
+		 * we get 10 msec to receive this irq... until this
+		 * is done we won't see the next packet.
+		 */
+		if (musb->set_address) {
+			musb->set_address = false;
+			musb_writeb(mbase, MUSB_FADDR, musb->address);
+		}
+
+		/* enter test mode if needed (exit by reset) */
+		else if (musb->test_mode) {
+			musb_dbg(musb, "entering TESTMODE");
+
+			if (MUSB_TEST_PACKET == musb->test_mode_nr)
+				musb_load_testpacket(musb);
+
+			musb_writeb(mbase, MUSB_TESTMODE,
+					musb->test_mode_nr);
+		}
+		fallthrough;
+
+	case MUSB_EP0_STAGE_STATUSOUT:
+		/* end of sequence #1: write to host (TX state) */
+		{
+			struct musb_request	*req;
+
+			req = next_ep0_request(musb);
+			if (req)
+				musb_g_ep0_giveback(musb, &req->request);
+		}
+
+		/*
+		 * In case when several interrupts can get coalesced,
+		 * check to see if we've already received a SETUP packet...
+		 */
+		if (csr & MUSB_CSR0_RXPKTRDY)
+			goto setup;
+
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_IDLE;
+		break;
+
+	case MUSB_EP0_STAGE_IDLE:
+		/*
+		 * This state is typically (but not always) indiscernible
+		 * from the status states since the corresponding interrupts
+		 * tend to happen within too little period of time (with only
+		 * a zero-length packet in between) and so get coalesced...
+		 */
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		fallthrough;
+
+	case MUSB_EP0_STAGE_SETUP:
+setup:
+		if (csr & MUSB_CSR0_RXPKTRDY) {
+			struct usb_ctrlrequest	setup;
+			int			handled = 0;
+
+			if (len != 8) {
+				ERR("SETUP packet len %d != 8 ?\n", len);
+				break;
+			}
+			musb_read_setup(musb, &setup);
+			retval = IRQ_HANDLED;
+
+			/* sometimes the RESET won't be reported */
+			if (unlikely(musb->g.speed == USB_SPEED_UNKNOWN)) {
+				u8	power;
+
+				printk(KERN_NOTICE "%s: peripheral reset "
+						"irq lost!\n",
+						musb_driver_name);
+				power = musb_readb(mbase, MUSB_POWER);
+				musb->g.speed = (power & MUSB_POWER_HSMODE)
+					? USB_SPEED_HIGH : USB_SPEED_FULL;
+
+			}
+
+			switch (musb->ep0_state) {
+
+			/* sequence #3 (no data stage), includes requests
+			 * we can't forward (notably SET_ADDRESS and the
+			 * device/endpoint feature set/clear operations)
+			 * plus SET_CONFIGURATION and others we must
+			 */
+			case MUSB_EP0_STAGE_ACKWAIT:
+				handled = service_zero_data_request(
+						musb, &setup);
+
+				/*
+				 * We're expecting no data in any case, so
+				 * always set the DATAEND bit -- doing this
+				 * here helps avoid SetupEnd interrupt coming
+				 * in the idle stage when we're stalling...
+				 */
+				musb->ackpend |= MUSB_CSR0_P_DATAEND;
+
+				/* status stage might be immediate */
+				if (handled > 0)
+					musb->ep0_state =
+						MUSB_EP0_STAGE_STATUSIN;
+				break;
+
+			/* sequence #1 (IN to host), includes GET_STATUS
+			 * requests that we can't forward, GET_DESCRIPTOR
+			 * and others that we must
+			 */
+			case MUSB_EP0_STAGE_TX:
+				handled = service_in_request(musb, &setup);
+				if (handled > 0) {
+					musb->ackpend = MUSB_CSR0_TXPKTRDY
+						| MUSB_CSR0_P_DATAEND;
+					musb->ep0_state =
+						MUSB_EP0_STAGE_STATUSOUT;
+				}
+				break;
+
+			/* sequence #2 (OUT from host), always forward */
+			default:		/* MUSB_EP0_STAGE_RX */
+				break;
+			}
+
+			musb_dbg(musb, "handled %d, csr %04x, ep0stage %s",
+				handled, csr,
+				decode_ep0stage(musb->ep0_state));
+
+			/* unless we need to delegate this to the gadget
+			 * driver, we know how to wrap this up:  csr0 has
+			 * not yet been written.
+			 */
+			if (handled < 0)
+				goto stall;
+			else if (handled > 0)
+				goto finish;
+
+			handled = forward_to_driver(musb, &setup);
+			if (handled < 0) {
+				musb_ep_select(mbase, 0);
+stall:
+				musb_dbg(musb, "stall (%d)", handled);
+				musb->ackpend |= MUSB_CSR0_P_SENDSTALL;
+				musb->ep0_state = MUSB_EP0_STAGE_IDLE;
+finish:
+				musb_writew(regs, MUSB_CSR0,
+						musb->ackpend);
+				musb->ackpend = 0;
+			}
+		}
+		break;
+
+	case MUSB_EP0_STAGE_ACKWAIT:
+		/* This should not happen. But happens with tusb6010 with
+		 * g_file_storage and high speed. Do nothing.
+		 */
+		retval = IRQ_HANDLED;
+		break;
+
+	default:
+		/* "can't happen" */
+		WARN_ON(1);
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SENDSTALL);
+		musb->ep0_state = MUSB_EP0_STAGE_IDLE;
+		break;
+	}
+
+	return retval;
+}
+
+
+static int
+musb_g_ep0_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc)
+{
+	/* always enabled */
+	return -EINVAL;
+}
+
+static int musb_g_ep0_disable(struct usb_ep *e)
+{
+	/* always enabled */
+	return -EINVAL;
+}
+
+static int
+musb_g_ep0_queue(struct usb_ep *e, struct usb_request *r, gfp_t gfp_flags)
+{
+	struct musb_ep		*ep;
+	struct musb_request	*req;
+	struct musb		*musb;
+	int			status;
+	unsigned long		lockflags;
+	void __iomem		*regs;
+
+	if (!e || !r)
+		return -EINVAL;
+
+	ep = to_musb_ep(e);
+	musb = ep->musb;
+	regs = musb->control_ep->regs;
+
+	req = to_musb_request(r);
+	req->musb = musb;
+	req->request.actual = 0;
+	req->request.status = -EINPROGRESS;
+	req->tx = ep->is_in;
+
+	spin_lock_irqsave(&musb->lock, lockflags);
+
+	if (!list_empty(&ep->req_list)) {
+		status = -EBUSY;
+		goto cleanup;
+	}
+
+	switch (musb->ep0_state) {
+	case MUSB_EP0_STAGE_RX:		/* control-OUT data */
+	case MUSB_EP0_STAGE_TX:		/* control-IN data */
+	case MUSB_EP0_STAGE_ACKWAIT:	/* zero-length data */
+		status = 0;
+		break;
+	default:
+		musb_dbg(musb, "ep0 request queued in state %d",
+				musb->ep0_state);
+		status = -EINVAL;
+		goto cleanup;
+	}
+
+	/* add request to the list */
+	list_add_tail(&req->list, &ep->req_list);
+
+	musb_dbg(musb, "queue to %s (%s), length=%d",
+			ep->name, ep->is_in ? "IN/TX" : "OUT/RX",
+			req->request.length);
+
+	musb_ep_select(musb->mregs, 0);
+
+	/* sequence #1, IN ... start writing the data */
+	if (musb->ep0_state == MUSB_EP0_STAGE_TX)
+		ep0_txstate(musb);
+
+	/* sequence #3, no-data ... issue IN status */
+	else if (musb->ep0_state == MUSB_EP0_STAGE_ACKWAIT) {
+		if (req->request.length)
+			status = -EINVAL;
+		else {
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+			musb_writew(regs, MUSB_CSR0,
+					musb->ackpend | MUSB_CSR0_P_DATAEND);
+			musb->ackpend = 0;
+			musb_g_ep0_giveback(ep->musb, r);
+		}
+
+	/* else for sequence #2 (OUT), caller provides a buffer
+	 * before the next packet arrives.  deferred responses
+	 * (after SETUP is acked) are racey.
+	 */
+	} else if (musb->ackpend) {
+		musb_writew(regs, MUSB_CSR0, musb->ackpend);
+		musb->ackpend = 0;
+	}
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, lockflags);
+	return status;
+}
+
+static int musb_g_ep0_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	/* we just won't support this */
+	return -EINVAL;
+}
+
+static int musb_g_ep0_halt(struct usb_ep *e, int value)
+{
+	struct musb_ep		*ep;
+	struct musb		*musb;
+	void __iomem		*base, *regs;
+	unsigned long		flags;
+	int			status;
+	u16			csr;
+
+	if (!e || !value)
+		return -EINVAL;
+
+	ep = to_musb_ep(e);
+	musb = ep->musb;
+	base = musb->mregs;
+	regs = musb->control_ep->regs;
+	status = 0;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (!list_empty(&ep->req_list)) {
+		status = -EBUSY;
+		goto cleanup;
+	}
+
+	musb_ep_select(base, 0);
+	csr = musb->ackpend;
+
+	switch (musb->ep0_state) {
+
+	/* Stalls are usually issued after parsing SETUP packet, either
+	 * directly in irq context from setup() or else later.
+	 */
+	case MUSB_EP0_STAGE_TX:		/* control-IN data */
+	case MUSB_EP0_STAGE_ACKWAIT:	/* STALL for zero-length data */
+	case MUSB_EP0_STAGE_RX:		/* control-OUT data */
+		csr = musb_readw(regs, MUSB_CSR0);
+		fallthrough;
+
+	/* It's also OK to issue stalls during callbacks when a non-empty
+	 * DATA stage buffer has been read (or even written).
+	 */
+	case MUSB_EP0_STAGE_STATUSIN:	/* control-OUT status */
+	case MUSB_EP0_STAGE_STATUSOUT:	/* control-IN status */
+
+		csr |= MUSB_CSR0_P_SENDSTALL;
+		musb_writew(regs, MUSB_CSR0, csr);
+		musb->ep0_state = MUSB_EP0_STAGE_IDLE;
+		musb->ackpend = 0;
+		break;
+	default:
+		musb_dbg(musb, "ep0 can't halt in state %d", musb->ep0_state);
+		status = -EINVAL;
+	}
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+const struct usb_ep_ops musb_g_ep0_ops = {
+	.enable		= musb_g_ep0_enable,
+	.disable	= musb_g_ep0_disable,
+	.alloc_request	= musb_alloc_request,
+	.free_request	= musb_free_request,
+	.queue		= musb_g_ep0_queue,
+	.dequeue	= musb_g_ep0_dequeue,
+	.set_halt	= musb_g_ep0_halt,
+};
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
new file mode 100644
index 000000000..ef0b1589b
--- /dev/null
+++ b/drivers/usb/musb/musb_host.c
@@ -0,0 +1,2759 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MUSB OTG driver host support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+
+#include "musb_core.h"
+#include "musb_host.h"
+#include "musb_trace.h"
+
+/* MUSB HOST status 22-mar-2006
+ *
+ * - There's still lots of partial code duplication for fault paths, so
+ *   they aren't handled as consistently as they need to be.
+ *
+ * - PIO mostly behaved when last tested.
+ *     + including ep0, with all usbtest cases 9, 10
+ *     + usbtest 14 (ep0out) doesn't seem to run at all
+ *     + double buffered OUT/TX endpoints saw stalls(!) with certain usbtest
+ *       configurations, but otherwise double buffering passes basic tests.
+ *     + for 2.6.N, for N > ~10, needs API changes for hcd framework.
+ *
+ * - DMA (CPPI) ... partially behaves, not currently recommended
+ *     + about 1/15 the speed of typical EHCI implementations (PCI)
+ *     + RX, all too often reqpkt seems to misbehave after tx
+ *     + TX, no known issues (other than evident silicon issue)
+ *
+ * - DMA (Mentor/OMAP) ...has at least toggle update problems
+ *
+ * - [23-feb-2009] minimal traffic scheduling to avoid bulk RX packet
+ *   starvation ... nothing yet for TX, interrupt, or bulk.
+ *
+ * - Not tested with HNP, but some SRP paths seem to behave.
+ *
+ * NOTE 24-August-2006:
+ *
+ * - Bulk traffic finally uses both sides of hardware ep1, freeing up an
+ *   extra endpoint for periodic use enabling hub + keybd + mouse.  That
+ *   mostly works, except that with "usbnet" it's easy to trigger cases
+ *   with "ping" where RX loses.  (a) ping to davinci, even "ping -f",
+ *   fine; but (b) ping _from_ davinci, even "ping -c 1", ICMP RX loses
+ *   although ARP RX wins.  (That test was done with a full speed link.)
+ */
+
+
+/*
+ * NOTE on endpoint usage:
+ *
+ * CONTROL transfers all go through ep0.  BULK ones go through dedicated IN
+ * and OUT endpoints ... hardware is dedicated for those "async" queue(s).
+ * (Yes, bulk _could_ use more of the endpoints than that, and would even
+ * benefit from it.)
+ *
+ * INTERUPPT and ISOCHRONOUS transfers are scheduled to the other endpoints.
+ * So far that scheduling is both dumb and optimistic:  the endpoint will be
+ * "claimed" until its software queue is no longer refilled.  No multiplexing
+ * of transfers between endpoints, or anything clever.
+ */
+
+struct musb *hcd_to_musb(struct usb_hcd *hcd)
+{
+	return *(struct musb **) hcd->hcd_priv;
+}
+
+
+static void musb_ep_program(struct musb *musb, u8 epnum,
+			struct urb *urb, int is_out,
+			u8 *buf, u32 offset, u32 len);
+
+/*
+ * Clear TX fifo. Needed to avoid BABBLE errors.
+ */
+static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
+{
+	struct musb	*musb = ep->musb;
+	void __iomem	*epio = ep->regs;
+	u16		csr;
+	int		retries = 1000;
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	while (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+		csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_TXPKTRDY;
+		musb_writew(epio, MUSB_TXCSR, csr);
+		csr = musb_readw(epio, MUSB_TXCSR);
+
+		/*
+		 * FIXME: sometimes the tx fifo flush failed, it has been
+		 * observed during device disconnect on AM335x.
+		 *
+		 * To reproduce the issue, ensure tx urb(s) are queued when
+		 * unplug the usb device which is connected to AM335x usb
+		 * host port.
+		 *
+		 * I found using a usb-ethernet device and running iperf
+		 * (client on AM335x) has very high chance to trigger it.
+		 *
+		 * Better to turn on musb_dbg() in musb_cleanup_urb() with
+		 * CPPI enabled to see the issue when aborting the tx channel.
+		 */
+		if (dev_WARN_ONCE(musb->controller, retries-- < 1,
+				"Could not flush host TX%d fifo: csr: %04x\n",
+				ep->epnum, csr))
+			return;
+		mdelay(1);
+	}
+}
+
+static void musb_h_ep0_flush_fifo(struct musb_hw_ep *ep)
+{
+	void __iomem	*epio = ep->regs;
+	u16		csr;
+	int		retries = 5;
+
+	/* scrub any data left in the fifo */
+	do {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (!(csr & (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_RXPKTRDY)))
+			break;
+		musb_writew(epio, MUSB_TXCSR, MUSB_CSR0_FLUSHFIFO);
+		csr = musb_readw(epio, MUSB_TXCSR);
+		udelay(10);
+	} while (--retries);
+
+	WARN(!retries, "Could not flush host TX%d fifo: csr: %04x\n",
+			ep->epnum, csr);
+
+	/* and reset for the next transfer */
+	musb_writew(epio, MUSB_TXCSR, 0);
+}
+
+/*
+ * Start transmit. Caller is responsible for locking shared resources.
+ * musb must be locked.
+ */
+static inline void musb_h_tx_start(struct musb_hw_ep *ep)
+{
+	u16	txcsr;
+
+	/* NOTE: no locks here; caller should lock and select EP */
+	if (ep->epnum) {
+		txcsr = musb_readw(ep->regs, MUSB_TXCSR);
+		txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
+		musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+	} else {
+		txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY;
+		musb_writew(ep->regs, MUSB_CSR0, txcsr);
+	}
+
+}
+
+static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep)
+{
+	u16	txcsr;
+
+	/* NOTE: no locks here; caller should lock and select EP */
+	txcsr = musb_readw(ep->regs, MUSB_TXCSR);
+	txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS;
+	if (is_cppi_enabled(ep->musb))
+		txcsr |= MUSB_TXCSR_DMAMODE;
+	musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+}
+
+static void musb_ep_set_qh(struct musb_hw_ep *ep, int is_in, struct musb_qh *qh)
+{
+	if (is_in != 0 || ep->is_shared_fifo)
+		ep->in_qh  = qh;
+	if (is_in == 0 || ep->is_shared_fifo)
+		ep->out_qh = qh;
+}
+
+static struct musb_qh *musb_ep_get_qh(struct musb_hw_ep *ep, int is_in)
+{
+	return is_in ? ep->in_qh : ep->out_qh;
+}
+
+/*
+ * Start the URB at the front of an endpoint's queue
+ * end must be claimed from the caller.
+ *
+ * Context: controller locked, irqs blocked
+ */
+static void
+musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
+{
+	u32			len;
+	void __iomem		*mbase =  musb->mregs;
+	struct urb		*urb = next_urb(qh);
+	void			*buf = urb->transfer_buffer;
+	u32			offset = 0;
+	struct musb_hw_ep	*hw_ep = qh->hw_ep;
+	int			epnum = hw_ep->epnum;
+
+	/* initialize software qh state */
+	qh->offset = 0;
+	qh->segsize = 0;
+
+	/* gather right source of data */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* control transfers always start with SETUP */
+		is_in = 0;
+		musb->ep0_stage = MUSB_EP0_START;
+		buf = urb->setup_packet;
+		len = 8;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		qh->iso_idx = 0;
+		qh->frame = 0;
+		offset = urb->iso_frame_desc[0].offset;
+		len = urb->iso_frame_desc[0].length;
+		break;
+	default:		/* bulk, interrupt */
+		/* actual_length may be nonzero on retry paths */
+		buf = urb->transfer_buffer + urb->actual_length;
+		len = urb->transfer_buffer_length - urb->actual_length;
+	}
+
+	trace_musb_urb_start(musb, urb);
+
+	/* Configure endpoint */
+	musb_ep_set_qh(hw_ep, is_in, qh);
+	musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len);
+
+	/* transmit may have more work: start it when it is time */
+	if (is_in)
+		return;
+
+	/* determine if the time is right for a periodic transfer */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_ISOC:
+	case USB_ENDPOINT_XFER_INT:
+		musb_dbg(musb, "check whether there's still time for periodic Tx");
+		/* FIXME this doesn't implement that scheduling policy ...
+		 * or handle framecounter wrapping
+		 */
+		if (1) {	/* Always assume URB_ISO_ASAP */
+			/* REVISIT the SOF irq handler shouldn't duplicate
+			 * this code; and we don't init urb->start_frame...
+			 */
+			qh->frame = 0;
+			goto start;
+		} else {
+			qh->frame = urb->start_frame;
+			/* enable SOF interrupt so we can count down */
+			musb_dbg(musb, "SOF for %d", epnum);
+#if 1 /* ifndef	CONFIG_ARCH_DAVINCI */
+			musb_writeb(mbase, MUSB_INTRUSBE, 0xff);
+#endif
+		}
+		break;
+	default:
+start:
+		musb_dbg(musb, "Start TX%d %s", epnum,
+			hw_ep->tx_channel ? "dma" : "pio");
+
+		if (!hw_ep->tx_channel)
+			musb_h_tx_start(hw_ep);
+		else if (is_cppi_enabled(musb) || tusb_dma_omap(musb))
+			musb_h_tx_dma_start(hw_ep);
+	}
+}
+
+/* Context: caller owns controller lock, IRQs are blocked */
+static void musb_giveback(struct musb *musb, struct urb *urb, int status)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	trace_musb_urb_gb(musb, urb);
+
+	usb_hcd_unlink_urb_from_ep(musb->hcd, urb);
+	spin_unlock(&musb->lock);
+	usb_hcd_giveback_urb(musb->hcd, urb, status);
+	spin_lock(&musb->lock);
+}
+
+/*
+ * Advance this hardware endpoint's queue, completing the specified URB and
+ * advancing to either the next URB queued to that qh, or else invalidating
+ * that qh and advancing to the next qh scheduled after the current one.
+ *
+ * Context: caller owns controller lock, IRQs are blocked
+ */
+static void musb_advance_schedule(struct musb *musb, struct urb *urb,
+				  struct musb_hw_ep *hw_ep, int is_in)
+{
+	struct musb_qh		*qh = musb_ep_get_qh(hw_ep, is_in);
+	struct musb_hw_ep	*ep = qh->hw_ep;
+	int			ready = qh->is_ready;
+	int			status;
+	u16			toggle;
+
+	status = (urb->status == -EINPROGRESS) ? 0 : urb->status;
+
+	/* save toggle eagerly, for paranoia */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_INT:
+		toggle = musb->io.get_toggle(qh, !is_in);
+		usb_settoggle(urb->dev, qh->epnum, !is_in, toggle ? 1 : 0);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (status == 0 && urb->error_count)
+			status = -EXDEV;
+		break;
+	}
+
+	qh->is_ready = 0;
+	musb_giveback(musb, urb, status);
+	qh->is_ready = ready;
+
+	/*
+	 * musb->lock had been unlocked in musb_giveback, so qh may
+	 * be freed, need to get it again
+	 */
+	qh = musb_ep_get_qh(hw_ep, is_in);
+
+	/* reclaim resources (and bandwidth) ASAP; deschedule it, and
+	 * invalidate qh as soon as list_empty(&hep->urb_list)
+	 */
+	if (qh && list_empty(&qh->hep->urb_list)) {
+		struct list_head	*head;
+		struct dma_controller	*dma = musb->dma_controller;
+
+		if (is_in) {
+			ep->rx_reinit = 1;
+			if (ep->rx_channel) {
+				dma->channel_release(ep->rx_channel);
+				ep->rx_channel = NULL;
+			}
+		} else {
+			ep->tx_reinit = 1;
+			if (ep->tx_channel) {
+				dma->channel_release(ep->tx_channel);
+				ep->tx_channel = NULL;
+			}
+		}
+
+		/* Clobber old pointers to this qh */
+		musb_ep_set_qh(ep, is_in, NULL);
+		qh->hep->hcpriv = NULL;
+
+		switch (qh->type) {
+
+		case USB_ENDPOINT_XFER_CONTROL:
+		case USB_ENDPOINT_XFER_BULK:
+			/* fifo policy for these lists, except that NAKing
+			 * should rotate a qh to the end (for fairness).
+			 */
+			if (qh->mux == 1) {
+				head = qh->ring.prev;
+				list_del(&qh->ring);
+				kfree(qh);
+				qh = first_qh(head);
+				break;
+			}
+			fallthrough;
+
+		case USB_ENDPOINT_XFER_ISOC:
+		case USB_ENDPOINT_XFER_INT:
+			/* this is where periodic bandwidth should be
+			 * de-allocated if it's tracked and allocated;
+			 * and where we'd update the schedule tree...
+			 */
+			kfree(qh);
+			qh = NULL;
+			break;
+		}
+	}
+
+	if (qh != NULL && qh->is_ready) {
+		musb_dbg(musb, "... next ep%d %cX urb %p",
+		    hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh));
+		musb_start_urb(musb, is_in, qh);
+	}
+}
+
+static u16 musb_h_flush_rxfifo(struct musb_hw_ep *hw_ep, u16 csr)
+{
+	/* we don't want fifo to fill itself again;
+	 * ignore dma (various models),
+	 * leave toggle alone (may not have been saved yet)
+	 */
+	csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_RXPKTRDY;
+	csr &= ~(MUSB_RXCSR_H_REQPKT
+		| MUSB_RXCSR_H_AUTOREQ
+		| MUSB_RXCSR_AUTOCLEAR);
+
+	/* write 2x to allow double buffering */
+	musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+	musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+
+	/* flush writebuffer */
+	return musb_readw(hw_ep->regs, MUSB_RXCSR);
+}
+
+/*
+ * PIO RX for a packet (or part of it).
+ */
+static bool
+musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err)
+{
+	u16			rx_count;
+	u8			*buf;
+	u16			csr;
+	bool			done = false;
+	u32			length;
+	int			do_flush = 0;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	int			pipe = urb->pipe;
+	void			*buffer = urb->transfer_buffer;
+
+	/* musb_ep_select(mbase, epnum); */
+	rx_count = musb_readw(epio, MUSB_RXCOUNT);
+	musb_dbg(musb, "RX%d count %d, buffer %p len %d/%d", epnum, rx_count,
+			urb->transfer_buffer, qh->offset,
+			urb->transfer_buffer_length);
+
+	/* unload FIFO */
+	if (usb_pipeisoc(pipe)) {
+		int					status = 0;
+		struct usb_iso_packet_descriptor	*d;
+
+		if (iso_err) {
+			status = -EILSEQ;
+			urb->error_count++;
+		}
+
+		d = urb->iso_frame_desc + qh->iso_idx;
+		buf = buffer + d->offset;
+		length = d->length;
+		if (rx_count > length) {
+			if (status == 0) {
+				status = -EOVERFLOW;
+				urb->error_count++;
+			}
+			musb_dbg(musb, "OVERFLOW %d into %d", rx_count, length);
+			do_flush = 1;
+		} else
+			length = rx_count;
+		urb->actual_length += length;
+		d->actual_length = length;
+
+		d->status = status;
+
+		/* see if we are done */
+		done = (++qh->iso_idx >= urb->number_of_packets);
+	} else {
+		/* non-isoch */
+		buf = buffer + qh->offset;
+		length = urb->transfer_buffer_length - qh->offset;
+		if (rx_count > length) {
+			if (urb->status == -EINPROGRESS)
+				urb->status = -EOVERFLOW;
+			musb_dbg(musb, "OVERFLOW %d into %d", rx_count, length);
+			do_flush = 1;
+		} else
+			length = rx_count;
+		urb->actual_length += length;
+		qh->offset += length;
+
+		/* see if we are done */
+		done = (urb->actual_length == urb->transfer_buffer_length)
+			|| (rx_count < qh->maxpacket)
+			|| (urb->status != -EINPROGRESS);
+		if (done
+				&& (urb->status == -EINPROGRESS)
+				&& (urb->transfer_flags & URB_SHORT_NOT_OK)
+				&& (urb->actual_length
+					< urb->transfer_buffer_length))
+			urb->status = -EREMOTEIO;
+	}
+
+	musb_read_fifo(hw_ep, length, buf);
+
+	csr = musb_readw(epio, MUSB_RXCSR);
+	csr |= MUSB_RXCSR_H_WZC_BITS;
+	if (unlikely(do_flush))
+		musb_h_flush_rxfifo(hw_ep, csr);
+	else {
+		/* REVISIT this assumes AUTOCLEAR is never set */
+		csr &= ~(MUSB_RXCSR_RXPKTRDY | MUSB_RXCSR_H_REQPKT);
+		if (!done)
+			csr |= MUSB_RXCSR_H_REQPKT;
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+	return done;
+}
+
+/* we don't always need to reinit a given side of an endpoint...
+ * when we do, use tx/rx reinit routine and then construct a new CSR
+ * to address data toggle, NYET, and DMA or PIO.
+ *
+ * it's possible that driver bugs (especially for DMA) or aborting a
+ * transfer might have left the endpoint busier than it should be.
+ * the busy/not-empty tests are basically paranoia.
+ */
+static void
+musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum)
+{
+	struct musb_hw_ep *ep = musb->endpoints + epnum;
+	u16	csr;
+
+	/* NOTE:  we know the "rx" fifo reinit never triggers for ep0.
+	 * That always uses tx_reinit since ep0 repurposes TX register
+	 * offsets; the initial SETUP packet is also a kind of OUT.
+	 */
+
+	/* if programmed for Tx, put it in RX mode */
+	if (ep->is_shared_fifo) {
+		csr = musb_readw(ep->regs, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_MODE) {
+			musb_h_tx_flush_fifo(ep);
+			csr = musb_readw(ep->regs, MUSB_TXCSR);
+			musb_writew(ep->regs, MUSB_TXCSR,
+				    csr | MUSB_TXCSR_FRCDATATOG);
+		}
+
+		/*
+		 * Clear the MODE bit (and everything else) to enable Rx.
+		 * NOTE: we mustn't clear the DMAMODE bit before DMAENAB.
+		 */
+		if (csr & MUSB_TXCSR_DMAMODE)
+			musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE);
+		musb_writew(ep->regs, MUSB_TXCSR, 0);
+
+	/* scrub all previous state, clearing toggle */
+	}
+	csr = musb_readw(ep->regs, MUSB_RXCSR);
+	if (csr & MUSB_RXCSR_RXPKTRDY)
+		WARNING("rx%d, packet/%d ready?\n", ep->epnum,
+			musb_readw(ep->regs, MUSB_RXCOUNT));
+
+	musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
+
+	/* target addr and (for multipoint) hub addr/port */
+	if (musb->is_multipoint) {
+		musb_write_rxfunaddr(musb, epnum, qh->addr_reg);
+		musb_write_rxhubaddr(musb, epnum, qh->h_addr_reg);
+		musb_write_rxhubport(musb, epnum, qh->h_port_reg);
+	} else
+		musb_writeb(musb->mregs, MUSB_FADDR, qh->addr_reg);
+
+	/* protocol/endpoint, interval/NAKlimit, i/o size */
+	musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg);
+	musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg);
+	/* NOTE: bulk combining rewrites high bits of maxpacket */
+	/* Set RXMAXP with the FIFO size of the endpoint
+	 * to disable double buffer mode.
+	 */
+	musb_writew(ep->regs, MUSB_RXMAXP,
+			qh->maxpacket | ((qh->hb_mult - 1) << 11));
+
+	ep->rx_reinit = 0;
+}
+
+static void musb_tx_dma_set_mode_mentor(struct musb_hw_ep *hw_ep, 
+					struct musb_qh *qh,
+					u32 *length, u8 *mode)
+{
+	struct dma_channel	*channel = hw_ep->tx_channel;
+	void __iomem		*epio = hw_ep->regs;
+	u16			pkt_size = qh->maxpacket;
+	u16			csr;
+
+	if (*length > channel->max_len)
+		*length = channel->max_len;
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	if (*length > pkt_size) {
+		*mode = 1;
+		csr |= MUSB_TXCSR_DMAMODE | MUSB_TXCSR_DMAENAB;
+		/* autoset shouldn't be set in high bandwidth */
+		/*
+		 * Enable Autoset according to table
+		 * below
+		 * bulk_split hb_mult	Autoset_Enable
+		 *	0	1	Yes(Normal)
+		 *	0	>1	No(High BW ISO)
+		 *	1	1	Yes(HS bulk)
+		 *	1	>1	Yes(FS bulk)
+		 */
+		if (qh->hb_mult == 1 || (qh->hb_mult > 1 &&
+					can_bulk_split(hw_ep->musb, qh->type)))
+			csr |= MUSB_TXCSR_AUTOSET;
+	} else {
+		*mode = 0;
+		csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
+		csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */
+	}
+	channel->desired_mode = *mode;
+	musb_writew(epio, MUSB_TXCSR, csr);
+}
+
+static void musb_tx_dma_set_mode_cppi_tusb(struct musb_hw_ep *hw_ep,
+					   struct urb *urb,
+					   u8 *mode)
+{
+	struct dma_channel *channel = hw_ep->tx_channel;
+
+	channel->actual_len = 0;
+
+	/*
+	 * TX uses "RNDIS" mode automatically but needs help
+	 * to identify the zero-length-final-packet case.
+	 */
+	*mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0;
+}
+
+static bool musb_tx_dma_program(struct dma_controller *dma,
+		struct musb_hw_ep *hw_ep, struct musb_qh *qh,
+		struct urb *urb, u32 offset, u32 length)
+{
+	struct dma_channel	*channel = hw_ep->tx_channel;
+	u16			pkt_size = qh->maxpacket;
+	u8			mode;
+
+	if (musb_dma_inventra(hw_ep->musb) || musb_dma_ux500(hw_ep->musb))
+		musb_tx_dma_set_mode_mentor(hw_ep, qh,
+					    &length, &mode);
+	else if (is_cppi_enabled(hw_ep->musb) || tusb_dma_omap(hw_ep->musb))
+		musb_tx_dma_set_mode_cppi_tusb(hw_ep, urb, &mode);
+	else
+		return false;
+
+	qh->segsize = length;
+
+	/*
+	 * Ensure the data reaches to main memory before starting
+	 * DMA transfer
+	 */
+	wmb();
+
+	if (!dma->channel_program(channel, pkt_size, mode,
+			urb->transfer_dma + offset, length)) {
+		void __iomem *epio = hw_ep->regs;
+		u16 csr;
+
+		dma->channel_release(channel);
+		hw_ep->tx_channel = NULL;
+
+		csr = musb_readw(epio, MUSB_TXCSR);
+		csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+		musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_H_WZC_BITS);
+		return false;
+	}
+	return true;
+}
+
+/*
+ * Program an HDRC endpoint as per the given URB
+ * Context: irqs blocked, controller lock held
+ */
+static void musb_ep_program(struct musb *musb, u8 epnum,
+			struct urb *urb, int is_out,
+			u8 *buf, u32 offset, u32 len)
+{
+	struct dma_controller	*dma_controller;
+	struct dma_channel	*dma_channel;
+	u8			dma_ok;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = musb_ep_get_qh(hw_ep, !is_out);
+	u16			packet_sz = qh->maxpacket;
+	u8			use_dma = 1;
+	u16			csr;
+
+	musb_dbg(musb, "%s hw%d urb %p spd%d dev%d ep%d%s "
+				"h_addr%02x h_port%02x bytes %d",
+			is_out ? "-->" : "<--",
+			epnum, urb, urb->dev->speed,
+			qh->addr_reg, qh->epnum, is_out ? "out" : "in",
+			qh->h_addr_reg, qh->h_port_reg,
+			len);
+
+	musb_ep_select(mbase, epnum);
+
+	if (is_out && !len) {
+		use_dma = 0;
+		csr = musb_readw(epio, MUSB_TXCSR);
+		csr &= ~MUSB_TXCSR_DMAENAB;
+		musb_writew(epio, MUSB_TXCSR, csr);
+		hw_ep->tx_channel = NULL;
+	}
+
+	/* candidate for DMA? */
+	dma_controller = musb->dma_controller;
+	if (use_dma && is_dma_capable() && epnum && dma_controller) {
+		dma_channel = is_out ? hw_ep->tx_channel : hw_ep->rx_channel;
+		if (!dma_channel) {
+			dma_channel = dma_controller->channel_alloc(
+					dma_controller, hw_ep, is_out);
+			if (is_out)
+				hw_ep->tx_channel = dma_channel;
+			else
+				hw_ep->rx_channel = dma_channel;
+		}
+	} else
+		dma_channel = NULL;
+
+	/* make sure we clear DMAEnab, autoSet bits from previous run */
+
+	/* OUT/transmit/EP0 or IN/receive? */
+	if (is_out) {
+		u16	csr;
+		u16	int_txe;
+		u16	load_count;
+
+		csr = musb_readw(epio, MUSB_TXCSR);
+
+		/* disable interrupt in case we flush */
+		int_txe = musb->intrtxe;
+		musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
+
+		/* general endpoint setup */
+		if (epnum) {
+			/* flush all old state, set default */
+			/*
+			 * We could be flushing valid
+			 * packets in double buffering
+			 * case
+			 */
+			if (!hw_ep->tx_double_buffered)
+				musb_h_tx_flush_fifo(hw_ep);
+
+			/*
+			 * We must not clear the DMAMODE bit before or in
+			 * the same cycle with the DMAENAB bit, so we clear
+			 * the latter first...
+			 */
+			csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
+					| MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAENAB
+					| MUSB_TXCSR_FRCDATATOG
+					| MUSB_TXCSR_H_RXSTALL
+					| MUSB_TXCSR_H_ERROR
+					| MUSB_TXCSR_TXPKTRDY
+					);
+			csr |= MUSB_TXCSR_MODE;
+
+			if (!hw_ep->tx_double_buffered)
+				csr |= musb->io.set_toggle(qh, is_out, urb);
+
+			musb_writew(epio, MUSB_TXCSR, csr);
+			/* REVISIT may need to clear FLUSHFIFO ... */
+			csr &= ~MUSB_TXCSR_DMAMODE;
+			musb_writew(epio, MUSB_TXCSR, csr);
+			csr = musb_readw(epio, MUSB_TXCSR);
+		} else {
+			/* endpoint 0: just flush */
+			musb_h_ep0_flush_fifo(hw_ep);
+		}
+
+		/* target addr and (for multipoint) hub addr/port */
+		if (musb->is_multipoint) {
+			musb_write_txfunaddr(musb, epnum, qh->addr_reg);
+			musb_write_txhubaddr(musb, epnum, qh->h_addr_reg);
+			musb_write_txhubport(musb, epnum, qh->h_port_reg);
+/* FIXME if !epnum, do the same for RX ... */
+		} else
+			musb_writeb(mbase, MUSB_FADDR, qh->addr_reg);
+
+		/* protocol/endpoint/interval/NAKlimit */
+		if (epnum) {
+			musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
+			if (can_bulk_split(musb, qh->type)) {
+				qh->hb_mult = hw_ep->max_packet_sz_tx
+						/ packet_sz;
+				musb_writew(epio, MUSB_TXMAXP, packet_sz
+					| ((qh->hb_mult) - 1) << 11);
+			} else {
+				musb_writew(epio, MUSB_TXMAXP,
+						qh->maxpacket |
+						((qh->hb_mult - 1) << 11));
+			}
+			musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg);
+		} else {
+			musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg);
+			if (musb->is_multipoint)
+				musb_writeb(epio, MUSB_TYPE0,
+						qh->type_reg);
+		}
+
+		if (can_bulk_split(musb, qh->type))
+			load_count = min((u32) hw_ep->max_packet_sz_tx,
+						len);
+		else
+			load_count = min((u32) packet_sz, len);
+
+		if (dma_channel && musb_tx_dma_program(dma_controller,
+					hw_ep, qh, urb, offset, len))
+			load_count = 0;
+
+		if (load_count) {
+			/* PIO to load FIFO */
+			qh->segsize = load_count;
+			if (!buf) {
+				sg_miter_start(&qh->sg_miter, urb->sg, 1,
+						SG_MITER_ATOMIC
+						| SG_MITER_FROM_SG);
+				if (!sg_miter_next(&qh->sg_miter)) {
+					dev_err(musb->controller,
+							"error: sg"
+							"list empty\n");
+					sg_miter_stop(&qh->sg_miter);
+					goto finish;
+				}
+				buf = qh->sg_miter.addr + urb->sg->offset +
+					urb->actual_length;
+				load_count = min_t(u32, load_count,
+						qh->sg_miter.length);
+				musb_write_fifo(hw_ep, load_count, buf);
+				qh->sg_miter.consumed = load_count;
+				sg_miter_stop(&qh->sg_miter);
+			} else
+				musb_write_fifo(hw_ep, load_count, buf);
+		}
+finish:
+		/* re-enable interrupt */
+		musb_writew(mbase, MUSB_INTRTXE, int_txe);
+
+	/* IN/receive */
+	} else {
+		u16 csr = 0;
+
+		if (hw_ep->rx_reinit) {
+			musb_rx_reinit(musb, qh, epnum);
+			csr |= musb->io.set_toggle(qh, is_out, urb);
+
+			if (qh->type == USB_ENDPOINT_XFER_INT)
+				csr |= MUSB_RXCSR_DISNYET;
+
+		} else {
+			csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+
+			if (csr & (MUSB_RXCSR_RXPKTRDY
+					| MUSB_RXCSR_DMAENAB
+					| MUSB_RXCSR_H_REQPKT))
+				ERR("broken !rx_reinit, ep%d csr %04x\n",
+						hw_ep->epnum, csr);
+
+			/* scrub any stale state, leaving toggle alone */
+			csr &= MUSB_RXCSR_DISNYET;
+		}
+
+		/* kick things off */
+
+		if ((is_cppi_enabled(musb) || tusb_dma_omap(musb)) && dma_channel) {
+			/* Candidate for DMA */
+			dma_channel->actual_len = 0L;
+			qh->segsize = len;
+
+			/* AUTOREQ is in a DMA register */
+			musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+			csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+
+			/*
+			 * Unless caller treats short RX transfers as
+			 * errors, we dare not queue multiple transfers.
+			 */
+			dma_ok = dma_controller->channel_program(dma_channel,
+					packet_sz, !(urb->transfer_flags &
+						     URB_SHORT_NOT_OK),
+					urb->transfer_dma + offset,
+					qh->segsize);
+			if (!dma_ok) {
+				dma_controller->channel_release(dma_channel);
+				hw_ep->rx_channel = dma_channel = NULL;
+			} else
+				csr |= MUSB_RXCSR_DMAENAB;
+		}
+
+		csr |= MUSB_RXCSR_H_REQPKT;
+		musb_dbg(musb, "RXCSR%d := %04x", epnum, csr);
+		musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+		csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+	}
+}
+
+/* Schedule next QH from musb->in_bulk/out_bulk and move the current qh to
+ * the end; avoids starvation for other endpoints.
+ */
+static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep,
+	int is_in)
+{
+	struct dma_channel	*dma;
+	struct urb		*urb;
+	void __iomem		*mbase = musb->mregs;
+	void __iomem		*epio = ep->regs;
+	struct musb_qh		*cur_qh, *next_qh;
+	u16			rx_csr, tx_csr;
+	u16			toggle;
+
+	musb_ep_select(mbase, ep->epnum);
+	if (is_in) {
+		dma = is_dma_capable() ? ep->rx_channel : NULL;
+
+		/*
+		 * Need to stop the transaction by clearing REQPKT first
+		 * then the NAK Timeout bit ref MUSBMHDRC USB 2.0 HIGH-SPEED
+		 * DUAL-ROLE CONTROLLER Programmer's Guide, section 9.2.2
+		 */
+		rx_csr = musb_readw(epio, MUSB_RXCSR);
+		rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+		rx_csr &= ~MUSB_RXCSR_H_REQPKT;
+		musb_writew(epio, MUSB_RXCSR, rx_csr);
+		rx_csr &= ~MUSB_RXCSR_DATAERROR;
+		musb_writew(epio, MUSB_RXCSR, rx_csr);
+
+		cur_qh = first_qh(&musb->in_bulk);
+	} else {
+		dma = is_dma_capable() ? ep->tx_channel : NULL;
+
+		/* clear nak timeout bit */
+		tx_csr = musb_readw(epio, MUSB_TXCSR);
+		tx_csr |= MUSB_TXCSR_H_WZC_BITS;
+		tx_csr &= ~MUSB_TXCSR_H_NAKTIMEOUT;
+		musb_writew(epio, MUSB_TXCSR, tx_csr);
+
+		cur_qh = first_qh(&musb->out_bulk);
+	}
+	if (cur_qh) {
+		urb = next_urb(cur_qh);
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			musb->dma_controller->channel_abort(dma);
+			urb->actual_length += dma->actual_len;
+			dma->actual_len = 0L;
+		}
+		toggle = musb->io.get_toggle(cur_qh, !is_in);
+		usb_settoggle(urb->dev, cur_qh->epnum, !is_in, toggle ? 1 : 0);
+
+		if (is_in) {
+			/* move cur_qh to end of queue */
+			list_move_tail(&cur_qh->ring, &musb->in_bulk);
+
+			/* get the next qh from musb->in_bulk */
+			next_qh = first_qh(&musb->in_bulk);
+
+			/* set rx_reinit and schedule the next qh */
+			ep->rx_reinit = 1;
+		} else {
+			/* move cur_qh to end of queue */
+			list_move_tail(&cur_qh->ring, &musb->out_bulk);
+
+			/* get the next qh from musb->out_bulk */
+			next_qh = first_qh(&musb->out_bulk);
+
+			/* set tx_reinit and schedule the next qh */
+			ep->tx_reinit = 1;
+		}
+
+		if (next_qh)
+			musb_start_urb(musb, is_in, next_qh);
+	}
+}
+
+/*
+ * Service the default endpoint (ep0) as host.
+ * Return true until it's time to start the status stage.
+ */
+static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
+{
+	bool			 more = false;
+	u8			*fifo_dest = NULL;
+	u16			fifo_count = 0;
+	struct musb_hw_ep	*hw_ep = musb->control_ep;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	struct usb_ctrlrequest	*request;
+
+	switch (musb->ep0_stage) {
+	case MUSB_EP0_IN:
+		fifo_dest = urb->transfer_buffer + urb->actual_length;
+		fifo_count = min_t(size_t, len, urb->transfer_buffer_length -
+				   urb->actual_length);
+		if (fifo_count < len)
+			urb->status = -EOVERFLOW;
+
+		musb_read_fifo(hw_ep, fifo_count, fifo_dest);
+
+		urb->actual_length += fifo_count;
+		if (len < qh->maxpacket) {
+			/* always terminate on short read; it's
+			 * rarely reported as an error.
+			 */
+		} else if (urb->actual_length <
+				urb->transfer_buffer_length)
+			more = true;
+		break;
+	case MUSB_EP0_START:
+		request = (struct usb_ctrlrequest *) urb->setup_packet;
+
+		if (!request->wLength) {
+			musb_dbg(musb, "start no-DATA");
+			break;
+		} else if (request->bRequestType & USB_DIR_IN) {
+			musb_dbg(musb, "start IN-DATA");
+			musb->ep0_stage = MUSB_EP0_IN;
+			more = true;
+			break;
+		} else {
+			musb_dbg(musb, "start OUT-DATA");
+			musb->ep0_stage = MUSB_EP0_OUT;
+			more = true;
+		}
+		fallthrough;
+	case MUSB_EP0_OUT:
+		fifo_count = min_t(size_t, qh->maxpacket,
+				   urb->transfer_buffer_length -
+				   urb->actual_length);
+		if (fifo_count) {
+			fifo_dest = (u8 *) (urb->transfer_buffer
+					+ urb->actual_length);
+			musb_dbg(musb, "Sending %d byte%s to ep0 fifo %p",
+					fifo_count,
+					(fifo_count == 1) ? "" : "s",
+					fifo_dest);
+			musb_write_fifo(hw_ep, fifo_count, fifo_dest);
+
+			urb->actual_length += fifo_count;
+			more = true;
+		}
+		break;
+	default:
+		ERR("bogus ep0 stage %d\n", musb->ep0_stage);
+		break;
+	}
+
+	return more;
+}
+
+/*
+ * Handle default endpoint interrupt as host. Only called in IRQ time
+ * from musb_interrupt().
+ *
+ * called with controller irqlocked
+ */
+irqreturn_t musb_h_ep0_irq(struct musb *musb)
+{
+	struct urb		*urb;
+	u16			csr, len;
+	int			status = 0;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_hw_ep	*hw_ep = musb->control_ep;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	bool			complete = false;
+	irqreturn_t		retval = IRQ_NONE;
+
+	/* ep0 only has one queue, "in" */
+	urb = next_urb(qh);
+
+	musb_ep_select(mbase, 0);
+	csr = musb_readw(epio, MUSB_CSR0);
+	len = (csr & MUSB_CSR0_RXPKTRDY)
+			? musb_readb(epio, MUSB_COUNT0)
+			: 0;
+
+	musb_dbg(musb, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d",
+		csr, qh, len, urb, musb->ep0_stage);
+
+	/* if we just did status stage, we are done */
+	if (MUSB_EP0_STATUS == musb->ep0_stage) {
+		retval = IRQ_HANDLED;
+		complete = true;
+	}
+
+	/* prepare status */
+	if (csr & MUSB_CSR0_H_RXSTALL) {
+		musb_dbg(musb, "STALLING ENDPOINT");
+		status = -EPIPE;
+
+	} else if (csr & MUSB_CSR0_H_ERROR) {
+		musb_dbg(musb, "no response, csr0 %04x", csr);
+		status = -EPROTO;
+
+	} else if (csr & MUSB_CSR0_H_NAKTIMEOUT) {
+		musb_dbg(musb, "control NAK timeout");
+
+		/* NOTE:  this code path would be a good place to PAUSE a
+		 * control transfer, if another one is queued, so that
+		 * ep0 is more likely to stay busy.  That's already done
+		 * for bulk RX transfers.
+		 *
+		 * if (qh->ring.next != &musb->control), then
+		 * we have a candidate... NAKing is *NOT* an error
+		 */
+		musb_writew(epio, MUSB_CSR0, 0);
+		retval = IRQ_HANDLED;
+	}
+
+	if (status) {
+		musb_dbg(musb, "aborting");
+		retval = IRQ_HANDLED;
+		if (urb)
+			urb->status = status;
+		complete = true;
+
+		/* use the proper sequence to abort the transfer */
+		if (csr & MUSB_CSR0_H_REQPKT) {
+			csr &= ~MUSB_CSR0_H_REQPKT;
+			musb_writew(epio, MUSB_CSR0, csr);
+			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
+			musb_writew(epio, MUSB_CSR0, csr);
+		} else {
+			musb_h_ep0_flush_fifo(hw_ep);
+		}
+
+		musb_writeb(epio, MUSB_NAKLIMIT0, 0);
+
+		/* clear it */
+		musb_writew(epio, MUSB_CSR0, 0);
+	}
+
+	if (unlikely(!urb)) {
+		/* stop endpoint since we have no place for its data, this
+		 * SHOULD NEVER HAPPEN! */
+		ERR("no URB for end 0\n");
+
+		musb_h_ep0_flush_fifo(hw_ep);
+		goto done;
+	}
+
+	if (!complete) {
+		/* call common logic and prepare response */
+		if (musb_h_ep0_continue(musb, len, urb)) {
+			/* more packets required */
+			csr = (MUSB_EP0_IN == musb->ep0_stage)
+				?  MUSB_CSR0_H_REQPKT : MUSB_CSR0_TXPKTRDY;
+		} else {
+			/* data transfer complete; perform status phase */
+			if (usb_pipeout(urb->pipe)
+					|| !urb->transfer_buffer_length)
+				csr = MUSB_CSR0_H_STATUSPKT
+					| MUSB_CSR0_H_REQPKT;
+			else
+				csr = MUSB_CSR0_H_STATUSPKT
+					| MUSB_CSR0_TXPKTRDY;
+
+			/* disable ping token in status phase */
+			csr |= MUSB_CSR0_H_DIS_PING;
+
+			/* flag status stage */
+			musb->ep0_stage = MUSB_EP0_STATUS;
+
+			musb_dbg(musb, "ep0 STATUS, csr %04x", csr);
+
+		}
+		musb_writew(epio, MUSB_CSR0, csr);
+		retval = IRQ_HANDLED;
+	} else
+		musb->ep0_stage = MUSB_EP0_IDLE;
+
+	/* call completion handler if done */
+	if (complete)
+		musb_advance_schedule(musb, urb, hw_ep, 1);
+done:
+	return retval;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Host side TX (OUT) using Mentor DMA works as follows:
+	submit_urb ->
+		- if queue was empty, Program Endpoint
+		- ... which starts DMA to fifo in mode 1 or 0
+
+	DMA Isr (transfer complete) -> TxAvail()
+		- Stop DMA (~DmaEnab)	(<--- Alert ... currently happens
+					only in musb_cleanup_urb)
+		- TxPktRdy has to be set in mode 0 or for
+			short packets in mode 1.
+*/
+
+#endif
+
+/* Service a Tx-Available or dma completion irq for the endpoint */
+void musb_host_tx(struct musb *musb, u8 epnum)
+{
+	int			pipe;
+	bool			done = false;
+	u16			tx_csr;
+	size_t			length = 0;
+	size_t			offset = 0;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->out_qh;
+	struct urb		*urb = next_urb(qh);
+	u32			status = 0;
+	void __iomem		*mbase = musb->mregs;
+	struct dma_channel	*dma;
+	bool			transfer_pending = false;
+
+	musb_ep_select(mbase, epnum);
+	tx_csr = musb_readw(epio, MUSB_TXCSR);
+
+	/* with CPPI, DMA sometimes triggers "extra" irqs */
+	if (!urb) {
+		musb_dbg(musb, "extra TX%d ready, csr %04x", epnum, tx_csr);
+		return;
+	}
+
+	pipe = urb->pipe;
+	dma = is_dma_capable() ? hw_ep->tx_channel : NULL;
+	trace_musb_urb_tx(musb, urb);
+	musb_dbg(musb, "OUT/TX%d end, csr %04x%s", epnum, tx_csr,
+			dma ? ", dma" : "");
+
+	/* check for errors */
+	if (tx_csr & MUSB_TXCSR_H_RXSTALL) {
+		/* dma was disabled, fifo flushed */
+		musb_dbg(musb, "TX end %d stall", epnum);
+
+		/* stall; record URB status */
+		status = -EPIPE;
+
+	} else if (tx_csr & MUSB_TXCSR_H_ERROR) {
+		/* (NON-ISO) dma was disabled, fifo flushed */
+		musb_dbg(musb, "TX 3strikes on ep=%d", epnum);
+
+		status = -ETIMEDOUT;
+
+	} else if (tx_csr & MUSB_TXCSR_H_NAKTIMEOUT) {
+		if (USB_ENDPOINT_XFER_BULK == qh->type && qh->mux == 1
+				&& !list_is_singular(&musb->out_bulk)) {
+			musb_dbg(musb, "NAK timeout on TX%d ep", epnum);
+			musb_bulk_nak_timeout(musb, hw_ep, 0);
+		} else {
+			musb_dbg(musb, "TX ep%d device not responding", epnum);
+			/* NOTE:  this code path would be a good place to PAUSE a
+			 * transfer, if there's some other (nonperiodic) tx urb
+			 * that could use this fifo.  (dma complicates it...)
+			 * That's already done for bulk RX transfers.
+			 *
+			 * if (bulk && qh->ring.next != &musb->out_bulk), then
+			 * we have a candidate... NAKing is *NOT* an error
+			 */
+			musb_ep_select(mbase, epnum);
+			musb_writew(epio, MUSB_TXCSR,
+					MUSB_TXCSR_H_WZC_BITS
+					| MUSB_TXCSR_TXPKTRDY);
+		}
+		return;
+	}
+
+done:
+	if (status) {
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			musb->dma_controller->channel_abort(dma);
+		}
+
+		/* do the proper sequence to abort the transfer in the
+		 * usb core; the dma engine should already be stopped.
+		 */
+		musb_h_tx_flush_fifo(hw_ep);
+		tx_csr &= ~(MUSB_TXCSR_AUTOSET
+				| MUSB_TXCSR_DMAENAB
+				| MUSB_TXCSR_H_ERROR
+				| MUSB_TXCSR_H_RXSTALL
+				| MUSB_TXCSR_H_NAKTIMEOUT
+				);
+
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_TXCSR, tx_csr);
+		/* REVISIT may need to clear FLUSHFIFO ... */
+		musb_writew(epio, MUSB_TXCSR, tx_csr);
+		musb_writeb(epio, MUSB_TXINTERVAL, 0);
+
+		done = true;
+	}
+
+	/* second cppi case */
+	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+		musb_dbg(musb, "extra TX%d ready, csr %04x", epnum, tx_csr);
+		return;
+	}
+
+	if (is_dma_capable() && dma && !status) {
+		/*
+		 * DMA has completed.  But if we're using DMA mode 1 (multi
+		 * packet DMA), we need a terminal TXPKTRDY interrupt before
+		 * we can consider this transfer completed, lest we trash
+		 * its last packet when writing the next URB's data.  So we
+		 * switch back to mode 0 to get that interrupt; we'll come
+		 * back here once it happens.
+		 */
+		if (tx_csr & MUSB_TXCSR_DMAMODE) {
+			/*
+			 * We shouldn't clear DMAMODE with DMAENAB set; so
+			 * clear them in a safe order.  That should be OK
+			 * once TXPKTRDY has been set (and I've never seen
+			 * it being 0 at this moment -- DMA interrupt latency
+			 * is significant) but if it hasn't been then we have
+			 * no choice but to stop being polite and ignore the
+			 * programmer's guide... :-)
+			 *
+			 * Note that we must write TXCSR with TXPKTRDY cleared
+			 * in order not to re-trigger the packet send (this bit
+			 * can't be cleared by CPU), and there's another caveat:
+			 * TXPKTRDY may be set shortly and then cleared in the
+			 * double-buffered FIFO mode, so we do an extra TXCSR
+			 * read for debouncing...
+			 */
+			tx_csr &= musb_readw(epio, MUSB_TXCSR);
+			if (tx_csr & MUSB_TXCSR_TXPKTRDY) {
+				tx_csr &= ~(MUSB_TXCSR_DMAENAB |
+					    MUSB_TXCSR_TXPKTRDY);
+				musb_writew(epio, MUSB_TXCSR,
+					    tx_csr | MUSB_TXCSR_H_WZC_BITS);
+			}
+			tx_csr &= ~(MUSB_TXCSR_DMAMODE |
+				    MUSB_TXCSR_TXPKTRDY);
+			musb_writew(epio, MUSB_TXCSR,
+				    tx_csr | MUSB_TXCSR_H_WZC_BITS);
+
+			/*
+			 * There is no guarantee that we'll get an interrupt
+			 * after clearing DMAMODE as we might have done this
+			 * too late (after TXPKTRDY was cleared by controller).
+			 * Re-read TXCSR as we have spoiled its previous value.
+			 */
+			tx_csr = musb_readw(epio, MUSB_TXCSR);
+		}
+
+		/*
+		 * We may get here from a DMA completion or TXPKTRDY interrupt.
+		 * In any case, we must check the FIFO status here and bail out
+		 * only if the FIFO still has data -- that should prevent the
+		 * "missed" TXPKTRDY interrupts and deal with double-buffered
+		 * FIFO mode too...
+		 */
+		if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) {
+			musb_dbg(musb,
+				"DMA complete but FIFO not empty, CSR %04x",
+				tx_csr);
+			return;
+		}
+	}
+
+	if (!status || dma || usb_pipeisoc(pipe)) {
+		if (dma)
+			length = dma->actual_len;
+		else
+			length = qh->segsize;
+		qh->offset += length;
+
+		if (usb_pipeisoc(pipe)) {
+			struct usb_iso_packet_descriptor	*d;
+
+			d = urb->iso_frame_desc + qh->iso_idx;
+			d->actual_length = length;
+			d->status = status;
+			if (++qh->iso_idx >= urb->number_of_packets) {
+				done = true;
+			} else {
+				d++;
+				offset = d->offset;
+				length = d->length;
+			}
+		} else if (dma && urb->transfer_buffer_length == qh->offset) {
+			done = true;
+		} else {
+			/* see if we need to send more data, or ZLP */
+			if (qh->segsize < qh->maxpacket)
+				done = true;
+			else if (qh->offset == urb->transfer_buffer_length
+					&& !(urb->transfer_flags
+						& URB_ZERO_PACKET))
+				done = true;
+			if (!done) {
+				offset = qh->offset;
+				length = urb->transfer_buffer_length - offset;
+				transfer_pending = true;
+			}
+		}
+	}
+
+	/* urb->status != -EINPROGRESS means request has been faulted,
+	 * so we must abort this transfer after cleanup
+	 */
+	if (urb->status != -EINPROGRESS) {
+		done = true;
+		if (status == 0)
+			status = urb->status;
+	}
+
+	if (done) {
+		/* set status */
+		urb->status = status;
+		urb->actual_length = qh->offset;
+		musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
+		return;
+	} else if ((usb_pipeisoc(pipe) || transfer_pending) && dma) {
+		if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb,
+				offset, length)) {
+			if (is_cppi_enabled(musb) || tusb_dma_omap(musb))
+				musb_h_tx_dma_start(hw_ep);
+			return;
+		}
+	} else	if (tx_csr & MUSB_TXCSR_DMAENAB) {
+		musb_dbg(musb, "not complete, but DMA enabled?");
+		return;
+	}
+
+	/*
+	 * PIO: start next packet in this URB.
+	 *
+	 * REVISIT: some docs say that when hw_ep->tx_double_buffered,
+	 * (and presumably, FIFO is not half-full) we should write *two*
+	 * packets before updating TXCSR; other docs disagree...
+	 */
+	if (length > qh->maxpacket)
+		length = qh->maxpacket;
+	/* Unmap the buffer so that CPU can use it */
+	usb_hcd_unmap_urb_for_dma(musb->hcd, urb);
+
+	/*
+	 * We need to map sg if the transfer_buffer is
+	 * NULL.
+	 */
+	if (!urb->transfer_buffer) {
+		/* sg_miter_start is already done in musb_ep_program */
+		if (!sg_miter_next(&qh->sg_miter)) {
+			dev_err(musb->controller, "error: sg list empty\n");
+			sg_miter_stop(&qh->sg_miter);
+			status = -EINVAL;
+			goto done;
+		}
+		length = min_t(u32, length, qh->sg_miter.length);
+		musb_write_fifo(hw_ep, length, qh->sg_miter.addr);
+		qh->sg_miter.consumed = length;
+		sg_miter_stop(&qh->sg_miter);
+	} else {
+		musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
+	}
+
+	qh->segsize = length;
+
+	musb_ep_select(mbase, epnum);
+	musb_writew(epio, MUSB_TXCSR,
+			MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
+}
+
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+/* Seems to set up ISO for cppi41 and not advance len. See commit c57c41d */
+static int musb_rx_dma_iso_cppi41(struct dma_controller *dma,
+				  struct musb_hw_ep *hw_ep,
+				  struct musb_qh *qh,
+				  struct urb *urb,
+				  size_t len)
+{
+	struct dma_channel *channel = hw_ep->rx_channel;
+	void __iomem *epio = hw_ep->regs;
+	dma_addr_t *buf;
+	u32 length;
+	u16 val;
+
+	buf = (void *)urb->iso_frame_desc[qh->iso_idx].offset +
+		(u32)urb->transfer_dma;
+
+	length = urb->iso_frame_desc[qh->iso_idx].length;
+
+	val = musb_readw(epio, MUSB_RXCSR);
+	val |= MUSB_RXCSR_DMAENAB;
+	musb_writew(hw_ep->regs, MUSB_RXCSR, val);
+
+	return dma->channel_program(channel, qh->maxpacket, 0,
+				   (u32)buf, length);
+}
+#else
+static inline int musb_rx_dma_iso_cppi41(struct dma_controller *dma,
+					 struct musb_hw_ep *hw_ep,
+					 struct musb_qh *qh,
+					 struct urb *urb,
+					 size_t len)
+{
+	return false;
+}
+#endif
+
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) || \
+	defined(CONFIG_USB_TI_CPPI41_DMA)
+/* Host side RX (IN) using Mentor DMA works as follows:
+	submit_urb ->
+		- if queue was empty, ProgramEndpoint
+		- first IN token is sent out (by setting ReqPkt)
+	LinuxIsr -> RxReady()
+	/\	=> first packet is received
+	|	- Set in mode 0 (DmaEnab, ~ReqPkt)
+	|		-> DMA Isr (transfer complete) -> RxReady()
+	|		    - Ack receive (~RxPktRdy), turn off DMA (~DmaEnab)
+	|		    - if urb not complete, send next IN token (ReqPkt)
+	|			   |		else complete urb.
+	|			   |
+	---------------------------
+ *
+ * Nuances of mode 1:
+ *	For short packets, no ack (+RxPktRdy) is sent automatically
+ *	(even if AutoClear is ON)
+ *	For full packets, ack (~RxPktRdy) and next IN token (+ReqPkt) is sent
+ *	automatically => major problem, as collecting the next packet becomes
+ *	difficult. Hence mode 1 is not used.
+ *
+ * REVISIT
+ *	All we care about at this driver level is that
+ *       (a) all URBs terminate with REQPKT cleared and fifo(s) empty;
+ *       (b) termination conditions are: short RX, or buffer full;
+ *       (c) fault modes include
+ *           - iff URB_SHORT_NOT_OK, short RX status is -EREMOTEIO.
+ *             (and that endpoint's dma queue stops immediately)
+ *           - overflow (full, PLUS more bytes in the terminal packet)
+ *
+ *	So for example, usb-storage sets URB_SHORT_NOT_OK, and would
+ *	thus be a great candidate for using mode 1 ... for all but the
+ *	last packet of one URB's transfer.
+ */
+static int musb_rx_dma_inventra_cppi41(struct dma_controller *dma,
+				       struct musb_hw_ep *hw_ep,
+				       struct musb_qh *qh,
+				       struct urb *urb,
+				       size_t len)
+{
+	struct dma_channel *channel = hw_ep->rx_channel;
+	void __iomem *epio = hw_ep->regs;
+	u16 val;
+	int pipe;
+	bool done;
+
+	pipe = urb->pipe;
+
+	if (usb_pipeisoc(pipe)) {
+		struct usb_iso_packet_descriptor *d;
+
+		d = urb->iso_frame_desc + qh->iso_idx;
+		d->actual_length = len;
+
+		/* even if there was an error, we did the dma
+		 * for iso_frame_desc->length
+		 */
+		if (d->status != -EILSEQ && d->status != -EOVERFLOW)
+			d->status = 0;
+
+		if (++qh->iso_idx >= urb->number_of_packets) {
+			done = true;
+		} else {
+			/* REVISIT: Why ignore return value here? */
+			if (musb_dma_cppi41(hw_ep->musb))
+				done = musb_rx_dma_iso_cppi41(dma, hw_ep, qh,
+							      urb, len);
+			done = false;
+		}
+
+	} else  {
+		/* done if urb buffer is full or short packet is recd */
+		done = (urb->actual_length + len >=
+			urb->transfer_buffer_length
+			|| channel->actual_len < qh->maxpacket
+			|| channel->rx_packet_done);
+	}
+
+	/* send IN token for next packet, without AUTOREQ */
+	if (!done) {
+		val = musb_readw(epio, MUSB_RXCSR);
+		val |= MUSB_RXCSR_H_REQPKT;
+		musb_writew(epio, MUSB_RXCSR, MUSB_RXCSR_H_WZC_BITS | val);
+	}
+
+	return done;
+}
+
+/* Disadvantage of using mode 1:
+ *	It's basically usable only for mass storage class; essentially all
+ *	other protocols also terminate transfers on short packets.
+ *
+ * Details:
+ *	An extra IN token is sent at the end of the transfer (due to AUTOREQ)
+ *	If you try to use mode 1 for (transfer_buffer_length - 512), and try
+ *	to use the extra IN token to grab the last packet using mode 0, then
+ *	the problem is that you cannot be sure when the device will send the
+ *	last packet and RxPktRdy set. Sometimes the packet is recd too soon
+ *	such that it gets lost when RxCSR is re-set at the end of the mode 1
+ *	transfer, while sometimes it is recd just a little late so that if you
+ *	try to configure for mode 0 soon after the mode 1 transfer is
+ *	completed, you will find rxcount 0. Okay, so you might think why not
+ *	wait for an interrupt when the pkt is recd. Well, you won't get any!
+ */
+static int musb_rx_dma_in_inventra_cppi41(struct dma_controller *dma,
+					  struct musb_hw_ep *hw_ep,
+					  struct musb_qh *qh,
+					  struct urb *urb,
+					  size_t len,
+					  u8 iso_err)
+{
+	struct musb *musb = hw_ep->musb;
+	void __iomem *epio = hw_ep->regs;
+	struct dma_channel *channel = hw_ep->rx_channel;
+	u16 rx_count, val;
+	int length, pipe, done;
+	dma_addr_t buf;
+
+	rx_count = musb_readw(epio, MUSB_RXCOUNT);
+	pipe = urb->pipe;
+
+	if (usb_pipeisoc(pipe)) {
+		int d_status = 0;
+		struct usb_iso_packet_descriptor *d;
+
+		d = urb->iso_frame_desc + qh->iso_idx;
+
+		if (iso_err) {
+			d_status = -EILSEQ;
+			urb->error_count++;
+		}
+		if (rx_count > d->length) {
+			if (d_status == 0) {
+				d_status = -EOVERFLOW;
+				urb->error_count++;
+			}
+			musb_dbg(musb, "** OVERFLOW %d into %d",
+				rx_count, d->length);
+
+			length = d->length;
+		} else
+			length = rx_count;
+		d->status = d_status;
+		buf = urb->transfer_dma + d->offset;
+	} else {
+		length = rx_count;
+		buf = urb->transfer_dma + urb->actual_length;
+	}
+
+	channel->desired_mode = 0;
+#ifdef USE_MODE1
+	/* because of the issue below, mode 1 will
+	 * only rarely behave with correct semantics.
+	 */
+	if ((urb->transfer_flags & URB_SHORT_NOT_OK)
+	    && (urb->transfer_buffer_length - urb->actual_length)
+	    > qh->maxpacket)
+		channel->desired_mode = 1;
+	if (rx_count < hw_ep->max_packet_sz_rx) {
+		length = rx_count;
+		channel->desired_mode = 0;
+	} else {
+		length = urb->transfer_buffer_length;
+	}
+#endif
+
+	/* See comments above on disadvantages of using mode 1 */
+	val = musb_readw(epio, MUSB_RXCSR);
+	val &= ~MUSB_RXCSR_H_REQPKT;
+
+	if (channel->desired_mode == 0)
+		val &= ~MUSB_RXCSR_H_AUTOREQ;
+	else
+		val |= MUSB_RXCSR_H_AUTOREQ;
+	val |= MUSB_RXCSR_DMAENAB;
+
+	/* autoclear shouldn't be set in high bandwidth */
+	if (qh->hb_mult == 1)
+		val |= MUSB_RXCSR_AUTOCLEAR;
+
+	musb_writew(epio, MUSB_RXCSR, MUSB_RXCSR_H_WZC_BITS | val);
+
+	/* REVISIT if when actual_length != 0,
+	 * transfer_buffer_length needs to be
+	 * adjusted first...
+	 */
+	done = dma->channel_program(channel, qh->maxpacket,
+				   channel->desired_mode,
+				   buf, length);
+
+	if (!done) {
+		dma->channel_release(channel);
+		hw_ep->rx_channel = NULL;
+		channel = NULL;
+		val = musb_readw(epio, MUSB_RXCSR);
+		val &= ~(MUSB_RXCSR_DMAENAB
+			 | MUSB_RXCSR_H_AUTOREQ
+			 | MUSB_RXCSR_AUTOCLEAR);
+		musb_writew(epio, MUSB_RXCSR, val);
+	}
+
+	return done;
+}
+#else
+static inline int musb_rx_dma_inventra_cppi41(struct dma_controller *dma,
+					      struct musb_hw_ep *hw_ep,
+					      struct musb_qh *qh,
+					      struct urb *urb,
+					      size_t len)
+{
+	return false;
+}
+
+static inline int musb_rx_dma_in_inventra_cppi41(struct dma_controller *dma,
+						 struct musb_hw_ep *hw_ep,
+						 struct musb_qh *qh,
+						 struct urb *urb,
+						 size_t len,
+						 u8 iso_err)
+{
+	return false;
+}
+#endif
+
+/*
+ * Service an RX interrupt for the given IN endpoint; docs cover bulk, iso,
+ * and high-bandwidth IN transfer cases.
+ */
+void musb_host_rx(struct musb *musb, u8 epnum)
+{
+	struct urb		*urb;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	struct dma_controller	*c = musb->dma_controller;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	size_t			xfer_len;
+	void __iomem		*mbase = musb->mregs;
+	u16			rx_csr, val;
+	bool			iso_err = false;
+	bool			done = false;
+	u32			status;
+	struct dma_channel	*dma;
+	unsigned int sg_flags = SG_MITER_ATOMIC | SG_MITER_TO_SG;
+
+	musb_ep_select(mbase, epnum);
+
+	urb = next_urb(qh);
+	dma = is_dma_capable() ? hw_ep->rx_channel : NULL;
+	status = 0;
+	xfer_len = 0;
+
+	rx_csr = musb_readw(epio, MUSB_RXCSR);
+	val = rx_csr;
+
+	if (unlikely(!urb)) {
+		/* REVISIT -- THIS SHOULD NEVER HAPPEN ... but, at least
+		 * usbtest #11 (unlinks) triggers it regularly, sometimes
+		 * with fifo full.  (Only with DMA??)
+		 */
+		musb_dbg(musb, "BOGUS RX%d ready, csr %04x, count %d",
+			epnum, val, musb_readw(epio, MUSB_RXCOUNT));
+		musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
+		return;
+	}
+
+	trace_musb_urb_rx(musb, urb);
+
+	/* check for errors, concurrent stall & unlink is not really
+	 * handled yet! */
+	if (rx_csr & MUSB_RXCSR_H_RXSTALL) {
+		musb_dbg(musb, "RX end %d STALL", epnum);
+
+		/* stall; record URB status */
+		status = -EPIPE;
+
+	} else if (rx_csr & MUSB_RXCSR_H_ERROR) {
+		dev_err(musb->controller, "ep%d RX three-strikes error", epnum);
+
+		/*
+		 * The three-strikes error could only happen when the USB
+		 * device is not accessible, for example detached or powered
+		 * off. So return the fatal error -ESHUTDOWN so hopefully the
+		 * USB device drivers won't immediately resubmit the same URB.
+		 */
+		status = -ESHUTDOWN;
+		musb_writeb(epio, MUSB_RXINTERVAL, 0);
+
+		rx_csr &= ~MUSB_RXCSR_H_ERROR;
+		musb_writew(epio, MUSB_RXCSR, rx_csr);
+
+	} else if (rx_csr & MUSB_RXCSR_DATAERROR) {
+
+		if (USB_ENDPOINT_XFER_ISOC != qh->type) {
+			musb_dbg(musb, "RX end %d NAK timeout", epnum);
+
+			/* NOTE: NAKing is *NOT* an error, so we want to
+			 * continue.  Except ... if there's a request for
+			 * another QH, use that instead of starving it.
+			 *
+			 * Devices like Ethernet and serial adapters keep
+			 * reads posted at all times, which will starve
+			 * other devices without this logic.
+			 */
+			if (usb_pipebulk(urb->pipe)
+					&& qh->mux == 1
+					&& !list_is_singular(&musb->in_bulk)) {
+				musb_bulk_nak_timeout(musb, hw_ep, 1);
+				return;
+			}
+			musb_ep_select(mbase, epnum);
+			rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+			rx_csr &= ~MUSB_RXCSR_DATAERROR;
+			musb_writew(epio, MUSB_RXCSR, rx_csr);
+
+			goto finish;
+		} else {
+			musb_dbg(musb, "RX end %d ISO data error", epnum);
+			/* packet error reported later */
+			iso_err = true;
+		}
+	} else if (rx_csr & MUSB_RXCSR_INCOMPRX) {
+		musb_dbg(musb, "end %d high bandwidth incomplete ISO packet RX",
+				epnum);
+		status = -EPROTO;
+	}
+
+	/* faults abort the transfer */
+	if (status) {
+		/* clean up dma and collect transfer count */
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			musb->dma_controller->channel_abort(dma);
+			xfer_len = dma->actual_len;
+		}
+		musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
+		musb_writeb(epio, MUSB_RXINTERVAL, 0);
+		done = true;
+		goto finish;
+	}
+
+	if (unlikely(dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY)) {
+		/* SHOULD NEVER HAPPEN ... but at least DaVinci has done it */
+		ERR("RX%d dma busy, csr %04x\n", epnum, rx_csr);
+		goto finish;
+	}
+
+	/* thorough shutdown for now ... given more precise fault handling
+	 * and better queueing support, we might keep a DMA pipeline going
+	 * while processing this irq for earlier completions.
+	 */
+
+	/* FIXME this is _way_ too much in-line logic for Mentor DMA */
+	if (!musb_dma_inventra(musb) && !musb_dma_ux500(musb) &&
+	    (rx_csr & MUSB_RXCSR_H_REQPKT)) {
+		/* REVISIT this happened for a while on some short reads...
+		 * the cleanup still needs investigation... looks bad...
+		 * and also duplicates dma cleanup code above ... plus,
+		 * shouldn't this be the "half full" double buffer case?
+		 */
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			musb->dma_controller->channel_abort(dma);
+			xfer_len = dma->actual_len;
+			done = true;
+		}
+
+		musb_dbg(musb, "RXCSR%d %04x, reqpkt, len %zu%s", epnum, rx_csr,
+				xfer_len, dma ? ", dma" : "");
+		rx_csr &= ~MUSB_RXCSR_H_REQPKT;
+
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_RXCSR,
+				MUSB_RXCSR_H_WZC_BITS | rx_csr);
+	}
+
+	if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) {
+		xfer_len = dma->actual_len;
+
+		val &= ~(MUSB_RXCSR_DMAENAB
+			| MUSB_RXCSR_H_AUTOREQ
+			| MUSB_RXCSR_AUTOCLEAR
+			| MUSB_RXCSR_RXPKTRDY);
+		musb_writew(hw_ep->regs, MUSB_RXCSR, val);
+
+		if (musb_dma_inventra(musb) || musb_dma_ux500(musb) ||
+		    musb_dma_cppi41(musb)) {
+			    done = musb_rx_dma_inventra_cppi41(c, hw_ep, qh, urb, xfer_len);
+			    musb_dbg(hw_ep->musb,
+				    "ep %d dma %s, rxcsr %04x, rxcount %d",
+				    epnum, done ? "off" : "reset",
+				    musb_readw(epio, MUSB_RXCSR),
+				    musb_readw(epio, MUSB_RXCOUNT));
+		} else {
+			done = true;
+		}
+
+	} else if (urb->status == -EINPROGRESS) {
+		/* if no errors, be sure a packet is ready for unloading */
+		if (unlikely(!(rx_csr & MUSB_RXCSR_RXPKTRDY))) {
+			status = -EPROTO;
+			ERR("Rx interrupt with no errors or packet!\n");
+
+			/* FIXME this is another "SHOULD NEVER HAPPEN" */
+
+/* SCRUB (RX) */
+			/* do the proper sequence to abort the transfer */
+			musb_ep_select(mbase, epnum);
+			val &= ~MUSB_RXCSR_H_REQPKT;
+			musb_writew(epio, MUSB_RXCSR, val);
+			goto finish;
+		}
+
+		/* we are expecting IN packets */
+		if ((musb_dma_inventra(musb) || musb_dma_ux500(musb) ||
+		    musb_dma_cppi41(musb)) && dma) {
+			musb_dbg(hw_ep->musb,
+				"RX%d count %d, buffer 0x%llx len %d/%d",
+				epnum, musb_readw(epio, MUSB_RXCOUNT),
+				(unsigned long long) urb->transfer_dma
+				+ urb->actual_length,
+				qh->offset,
+				urb->transfer_buffer_length);
+
+			if (musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh, urb,
+							   xfer_len, iso_err))
+				goto finish;
+			else
+				dev_err(musb->controller, "error: rx_dma failed\n");
+		}
+
+		if (!dma) {
+			unsigned int received_len;
+
+			/* Unmap the buffer so that CPU can use it */
+			usb_hcd_unmap_urb_for_dma(musb->hcd, urb);
+
+			/*
+			 * We need to map sg if the transfer_buffer is
+			 * NULL.
+			 */
+			if (!urb->transfer_buffer) {
+				qh->use_sg = true;
+				sg_miter_start(&qh->sg_miter, urb->sg, 1,
+						sg_flags);
+			}
+
+			if (qh->use_sg) {
+				if (!sg_miter_next(&qh->sg_miter)) {
+					dev_err(musb->controller, "error: sg list empty\n");
+					sg_miter_stop(&qh->sg_miter);
+					status = -EINVAL;
+					done = true;
+					goto finish;
+				}
+				urb->transfer_buffer = qh->sg_miter.addr;
+				received_len = urb->actual_length;
+				qh->offset = 0x0;
+				done = musb_host_packet_rx(musb, urb, epnum,
+						iso_err);
+				/* Calculate the number of bytes received */
+				received_len = urb->actual_length -
+					received_len;
+				qh->sg_miter.consumed = received_len;
+				sg_miter_stop(&qh->sg_miter);
+			} else {
+				done = musb_host_packet_rx(musb, urb,
+						epnum, iso_err);
+			}
+			musb_dbg(musb, "read %spacket", done ? "last " : "");
+		}
+	}
+
+finish:
+	urb->actual_length += xfer_len;
+	qh->offset += xfer_len;
+	if (done) {
+		if (qh->use_sg) {
+			qh->use_sg = false;
+			urb->transfer_buffer = NULL;
+		}
+
+		if (urb->status == -EINPROGRESS)
+			urb->status = status;
+		musb_advance_schedule(musb, urb, hw_ep, USB_DIR_IN);
+	}
+}
+
+/* schedule nodes correspond to peripheral endpoints, like an OHCI QH.
+ * the software schedule associates multiple such nodes with a given
+ * host side hardware endpoint + direction; scheduling may activate
+ * that hardware endpoint.
+ */
+static int musb_schedule(
+	struct musb		*musb,
+	struct musb_qh		*qh,
+	int			is_in)
+{
+	int			idle = 0;
+	int			best_diff;
+	int			best_end, epnum;
+	struct musb_hw_ep	*hw_ep = NULL;
+	struct list_head	*head = NULL;
+	u8			toggle;
+	u8			txtype;
+	struct urb		*urb = next_urb(qh);
+
+	/* use fixed hardware for control and bulk */
+	if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
+		head = &musb->control;
+		hw_ep = musb->control_ep;
+		goto success;
+	}
+
+	/* else, periodic transfers get muxed to other endpoints */
+
+	/*
+	 * We know this qh hasn't been scheduled, so all we need to do
+	 * is choose which hardware endpoint to put it on ...
+	 *
+	 * REVISIT what we really want here is a regular schedule tree
+	 * like e.g. OHCI uses.
+	 */
+	best_diff = 4096;
+	best_end = -1;
+
+	for (epnum = 1, hw_ep = musb->endpoints + 1;
+			epnum < musb->nr_endpoints;
+			epnum++, hw_ep++) {
+		int	diff;
+
+		if (musb_ep_get_qh(hw_ep, is_in) != NULL)
+			continue;
+
+		if (hw_ep == musb->bulk_ep)
+			continue;
+
+		if (is_in)
+			diff = hw_ep->max_packet_sz_rx;
+		else
+			diff = hw_ep->max_packet_sz_tx;
+		diff -= (qh->maxpacket * qh->hb_mult);
+
+		if (diff >= 0 && best_diff > diff) {
+
+			/*
+			 * Mentor controller has a bug in that if we schedule
+			 * a BULK Tx transfer on an endpoint that had earlier
+			 * handled ISOC then the BULK transfer has to start on
+			 * a zero toggle.  If the BULK transfer starts on a 1
+			 * toggle then this transfer will fail as the mentor
+			 * controller starts the Bulk transfer on a 0 toggle
+			 * irrespective of the programming of the toggle bits
+			 * in the TXCSR register.  Check for this condition
+			 * while allocating the EP for a Tx Bulk transfer.  If
+			 * so skip this EP.
+			 */
+			hw_ep = musb->endpoints + epnum;
+			toggle = usb_gettoggle(urb->dev, qh->epnum, !is_in);
+			txtype = (musb_readb(hw_ep->regs, MUSB_TXTYPE)
+					>> 4) & 0x3;
+			if (!is_in && (qh->type == USB_ENDPOINT_XFER_BULK) &&
+				toggle && (txtype == USB_ENDPOINT_XFER_ISOC))
+				continue;
+
+			best_diff = diff;
+			best_end = epnum;
+		}
+	}
+	/* use bulk reserved ep1 if no other ep is free */
+	if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
+		hw_ep = musb->bulk_ep;
+		if (is_in)
+			head = &musb->in_bulk;
+		else
+			head = &musb->out_bulk;
+
+		/* Enable bulk RX/TX NAK timeout scheme when bulk requests are
+		 * multiplexed. This scheme does not work in high speed to full
+		 * speed scenario as NAK interrupts are not coming from a
+		 * full speed device connected to a high speed device.
+		 * NAK timeout interval is 8 (128 uframe or 16ms) for HS and
+		 * 4 (8 frame or 8ms) for FS device.
+		 */
+		if (qh->dev)
+			qh->intv_reg =
+				(USB_SPEED_HIGH == qh->dev->speed) ? 8 : 4;
+		goto success;
+	} else if (best_end < 0) {
+		dev_err(musb->controller,
+				"%s hwep alloc failed for %dx%d\n",
+				musb_ep_xfertype_string(qh->type),
+				qh->hb_mult, qh->maxpacket);
+		return -ENOSPC;
+	}
+
+	idle = 1;
+	qh->mux = 0;
+	hw_ep = musb->endpoints + best_end;
+	musb_dbg(musb, "qh %p periodic slot %d", qh, best_end);
+success:
+	if (head) {
+		idle = list_empty(head);
+		list_add_tail(&qh->ring, head);
+		qh->mux = 1;
+	}
+	qh->hw_ep = hw_ep;
+	qh->hep->hcpriv = qh;
+	if (idle)
+		musb_start_urb(musb, is_in, qh);
+	return 0;
+}
+
+static int musb_urb_enqueue(
+	struct usb_hcd			*hcd,
+	struct urb			*urb,
+	gfp_t				mem_flags)
+{
+	unsigned long			flags;
+	struct musb			*musb = hcd_to_musb(hcd);
+	struct usb_host_endpoint	*hep = urb->ep;
+	struct musb_qh			*qh;
+	struct usb_endpoint_descriptor	*epd = &hep->desc;
+	int				ret;
+	unsigned			type_reg;
+	unsigned			interval;
+
+	/* host role must be active */
+	if (!is_host_active(musb) || !musb->is_active)
+		return -ENODEV;
+
+	trace_musb_urb_enq(musb, urb);
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	qh = ret ? NULL : hep->hcpriv;
+	if (qh)
+		urb->hcpriv = qh;
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	/* DMA mapping was already done, if needed, and this urb is on
+	 * hep->urb_list now ... so we're done, unless hep wasn't yet
+	 * scheduled onto a live qh.
+	 *
+	 * REVISIT best to keep hep->hcpriv valid until the endpoint gets
+	 * disabled, testing for empty qh->ring and avoiding qh setup costs
+	 * except for the first urb queued after a config change.
+	 */
+	if (qh || ret)
+		return ret;
+
+	/* Allocate and initialize qh, minimizing the work done each time
+	 * hw_ep gets reprogrammed, or with irqs blocked.  Then schedule it.
+	 *
+	 * REVISIT consider a dedicated qh kmem_cache, so it's harder
+	 * for bugs in other kernel code to break this driver...
+	 */
+	qh = kzalloc(sizeof *qh, mem_flags);
+	if (!qh) {
+		spin_lock_irqsave(&musb->lock, flags);
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		spin_unlock_irqrestore(&musb->lock, flags);
+		return -ENOMEM;
+	}
+
+	qh->hep = hep;
+	qh->dev = urb->dev;
+	INIT_LIST_HEAD(&qh->ring);
+	qh->is_ready = 1;
+
+	qh->maxpacket = usb_endpoint_maxp(epd);
+	qh->type = usb_endpoint_type(epd);
+
+	/* Bits 11 & 12 of wMaxPacketSize encode high bandwidth multiplier.
+	 * Some musb cores don't support high bandwidth ISO transfers; and
+	 * we don't (yet!) support high bandwidth interrupt transfers.
+	 */
+	qh->hb_mult = usb_endpoint_maxp_mult(epd);
+	if (qh->hb_mult > 1) {
+		int ok = (qh->type == USB_ENDPOINT_XFER_ISOC);
+
+		if (ok)
+			ok = (usb_pipein(urb->pipe) && musb->hb_iso_rx)
+				|| (usb_pipeout(urb->pipe) && musb->hb_iso_tx);
+		if (!ok) {
+			dev_err(musb->controller,
+				"high bandwidth %s (%dx%d) not supported\n",
+				musb_ep_xfertype_string(qh->type),
+				qh->hb_mult, qh->maxpacket & 0x7ff);
+			ret = -EMSGSIZE;
+			goto done;
+		}
+		qh->maxpacket &= 0x7ff;
+	}
+
+	qh->epnum = usb_endpoint_num(epd);
+
+	/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
+	qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
+
+	/* precompute rxtype/txtype/type0 register */
+	type_reg = (qh->type << 4) | qh->epnum;
+	switch (urb->dev->speed) {
+	case USB_SPEED_LOW:
+		type_reg |= 0xc0;
+		break;
+	case USB_SPEED_FULL:
+		type_reg |= 0x80;
+		break;
+	default:
+		type_reg |= 0x40;
+	}
+	qh->type_reg = type_reg;
+
+	/* Precompute RXINTERVAL/TXINTERVAL register */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_INT:
+		/*
+		 * Full/low speeds use the  linear encoding,
+		 * high speed uses the logarithmic encoding.
+		 */
+		if (urb->dev->speed <= USB_SPEED_FULL) {
+			interval = max_t(u8, epd->bInterval, 1);
+			break;
+		}
+		fallthrough;
+	case USB_ENDPOINT_XFER_ISOC:
+		/* ISO always uses logarithmic encoding */
+		interval = min_t(u8, epd->bInterval, 16);
+		break;
+	default:
+		/* REVISIT we actually want to use NAK limits, hinting to the
+		 * transfer scheduling logic to try some other qh, e.g. try
+		 * for 2 msec first:
+		 *
+		 * interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16 : 2;
+		 *
+		 * The downside of disabling this is that transfer scheduling
+		 * gets VERY unfair for nonperiodic transfers; a misbehaving
+		 * peripheral could make that hurt.  That's perfectly normal
+		 * for reads from network or serial adapters ... so we have
+		 * partial NAKlimit support for bulk RX.
+		 *
+		 * The upside of disabling it is simpler transfer scheduling.
+		 */
+		interval = 0;
+	}
+	qh->intv_reg = interval;
+
+	/* precompute addressing for external hub/tt ports */
+	if (musb->is_multipoint) {
+		struct usb_device	*parent = urb->dev->parent;
+
+		if (parent != hcd->self.root_hub) {
+			qh->h_addr_reg = (u8) parent->devnum;
+
+			/* set up tt info if needed */
+			if (urb->dev->tt) {
+				qh->h_port_reg = (u8) urb->dev->ttport;
+				if (urb->dev->tt->hub)
+					qh->h_addr_reg =
+						(u8) urb->dev->tt->hub->devnum;
+				if (urb->dev->tt->multi)
+					qh->h_addr_reg |= 0x80;
+			}
+		}
+	}
+
+	/* invariant: hep->hcpriv is null OR the qh that's already scheduled.
+	 * until we get real dma queues (with an entry for each urb/buffer),
+	 * we only have work to do in the former case.
+	 */
+	spin_lock_irqsave(&musb->lock, flags);
+	if (hep->hcpriv || !next_urb(qh)) {
+		/* some concurrent activity submitted another urb to hep...
+		 * odd, rare, error prone, but legal.
+		 */
+		kfree(qh);
+		qh = NULL;
+		ret = 0;
+	} else
+		ret = musb_schedule(musb, qh,
+				epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK);
+
+	if (ret == 0) {
+		urb->hcpriv = qh;
+		/* FIXME set urb->start_frame for iso/intr, it's tested in
+		 * musb_start_urb(), but otherwise only konicawc cares ...
+		 */
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+done:
+	if (ret != 0) {
+		spin_lock_irqsave(&musb->lock, flags);
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		spin_unlock_irqrestore(&musb->lock, flags);
+		kfree(qh);
+	}
+	return ret;
+}
+
+
+/*
+ * abort a transfer that's at the head of a hardware queue.
+ * called with controller locked, irqs blocked
+ * that hardware queue advances to the next transfer, unless prevented
+ */
+static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
+{
+	struct musb_hw_ep	*ep = qh->hw_ep;
+	struct musb		*musb = ep->musb;
+	void __iomem		*epio = ep->regs;
+	unsigned		hw_end = ep->epnum;
+	void __iomem		*regs = ep->musb->mregs;
+	int			is_in = usb_pipein(urb->pipe);
+	int			status = 0;
+	u16			csr;
+	struct dma_channel	*dma = NULL;
+
+	musb_ep_select(regs, hw_end);
+
+	if (is_dma_capable()) {
+		dma = is_in ? ep->rx_channel : ep->tx_channel;
+		if (dma) {
+			status = ep->musb->dma_controller->channel_abort(dma);
+			musb_dbg(musb, "abort %cX%d DMA for urb %p --> %d",
+				is_in ? 'R' : 'T', ep->epnum,
+				urb, status);
+			urb->actual_length += dma->actual_len;
+		}
+	}
+
+	/* turn off DMA requests, discard state, stop polling ... */
+	if (ep->epnum && is_in) {
+		/* giveback saves bulk toggle */
+		csr = musb_h_flush_rxfifo(ep, 0);
+
+		/* clear the endpoint's irq status here to avoid bogus irqs */
+		if (is_dma_capable() && dma)
+			musb_platform_clear_ep_rxintr(musb, ep->epnum);
+	} else if (ep->epnum) {
+		musb_h_tx_flush_fifo(ep);
+		csr = musb_readw(epio, MUSB_TXCSR);
+		csr &= ~(MUSB_TXCSR_AUTOSET
+			| MUSB_TXCSR_DMAENAB
+			| MUSB_TXCSR_H_RXSTALL
+			| MUSB_TXCSR_H_NAKTIMEOUT
+			| MUSB_TXCSR_H_ERROR
+			| MUSB_TXCSR_TXPKTRDY);
+		musb_writew(epio, MUSB_TXCSR, csr);
+		/* REVISIT may need to clear FLUSHFIFO ... */
+		musb_writew(epio, MUSB_TXCSR, csr);
+		/* flush cpu writebuffer */
+		csr = musb_readw(epio, MUSB_TXCSR);
+	} else  {
+		musb_h_ep0_flush_fifo(ep);
+	}
+	if (status == 0)
+		musb_advance_schedule(ep->musb, urb, ep, is_in);
+	return status;
+}
+
+static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct musb		*musb = hcd_to_musb(hcd);
+	struct musb_qh		*qh;
+	unsigned long		flags;
+	int			is_in  = usb_pipein(urb->pipe);
+	int			ret;
+
+	trace_musb_urb_deq(musb, urb);
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (ret)
+		goto done;
+
+	qh = urb->hcpriv;
+	if (!qh)
+		goto done;
+
+	/*
+	 * Any URB not actively programmed into endpoint hardware can be
+	 * immediately given back; that's any URB not at the head of an
+	 * endpoint queue, unless someday we get real DMA queues.  And even
+	 * if it's at the head, it might not be known to the hardware...
+	 *
+	 * Otherwise abort current transfer, pending DMA, etc.; urb->status
+	 * has already been updated.  This is a synchronous abort; it'd be
+	 * OK to hold off until after some IRQ, though.
+	 *
+	 * NOTE: qh is invalid unless !list_empty(&hep->urb_list)
+	 */
+	if (!qh->is_ready
+			|| urb->urb_list.prev != &qh->hep->urb_list
+			|| musb_ep_get_qh(qh->hw_ep, is_in) != qh) {
+		int	ready = qh->is_ready;
+
+		qh->is_ready = 0;
+		musb_giveback(musb, urb, 0);
+		qh->is_ready = ready;
+
+		/* If nothing else (usually musb_giveback) is using it
+		 * and its URB list has emptied, recycle this qh.
+		 */
+		if (ready && list_empty(&qh->hep->urb_list)) {
+			musb_ep_set_qh(qh->hw_ep, is_in, NULL);
+			qh->hep->hcpriv = NULL;
+			list_del(&qh->ring);
+			kfree(qh);
+		}
+	} else
+		ret = musb_cleanup_urb(urb, qh);
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return ret;
+}
+
+/* disable an endpoint */
+static void
+musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
+{
+	u8			is_in = hep->desc.bEndpointAddress & USB_DIR_IN;
+	unsigned long		flags;
+	struct musb		*musb = hcd_to_musb(hcd);
+	struct musb_qh		*qh;
+	struct urb		*urb;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	qh = hep->hcpriv;
+	if (qh == NULL)
+		goto exit;
+
+	/* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
+
+	/* Kick the first URB off the hardware, if needed */
+	qh->is_ready = 0;
+	if (musb_ep_get_qh(qh->hw_ep, is_in) == qh) {
+		urb = next_urb(qh);
+
+		/* make software (then hardware) stop ASAP */
+		if (!urb->unlinked)
+			urb->status = -ESHUTDOWN;
+
+		/* cleanup */
+		musb_cleanup_urb(urb, qh);
+
+		/* Then nuke all the others ... and advance the
+		 * queue on hw_ep (e.g. bulk ring) when we're done.
+		 */
+		while (!list_empty(&hep->urb_list)) {
+			urb = next_urb(qh);
+			urb->status = -ESHUTDOWN;
+			musb_advance_schedule(musb, urb, qh->hw_ep, is_in);
+		}
+	} else {
+		/* Just empty the queue; the hardware is busy with
+		 * other transfers, and since !qh->is_ready nothing
+		 * will activate any of these as it advances.
+		 */
+		while (!list_empty(&hep->urb_list))
+			musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
+
+		hep->hcpriv = NULL;
+		list_del(&qh->ring);
+		kfree(qh);
+	}
+exit:
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static int musb_h_get_frame_number(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	return musb_readw(musb->mregs, MUSB_FRAME);
+}
+
+static int musb_h_start(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	/* NOTE: musb_start() is called when the hub driver turns
+	 * on port power, or when (OTG) peripheral starts.
+	 */
+	hcd->state = HC_STATE_RUNNING;
+	musb->port1_status = 0;
+	return 0;
+}
+
+static void musb_h_stop(struct usb_hcd *hcd)
+{
+	musb_stop(hcd_to_musb(hcd));
+	hcd->state = HC_STATE_HALT;
+}
+
+static int musb_bus_suspend(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+	u8		devctl;
+	int		ret;
+
+	ret = musb_port_suspend(musb, true);
+	if (ret)
+		return ret;
+
+	if (!is_host_active(musb))
+		return 0;
+
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_A_SUSPEND:
+		return 0;
+	case OTG_STATE_A_WAIT_VRISE:
+		/* ID could be grounded even if there's no device
+		 * on the other end of the cable.  NOTE that the
+		 * A_WAIT_VRISE timers are messy with MUSB...
+		 */
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
+		break;
+	default:
+		break;
+	}
+
+	if (musb->is_active) {
+		WARNING("trying to suspend as %s while active\n",
+				usb_otg_state_string(musb->xceiv->otg->state));
+		return -EBUSY;
+	} else
+		return 0;
+}
+
+static int musb_bus_resume(struct usb_hcd *hcd)
+{
+	struct musb *musb = hcd_to_musb(hcd);
+
+	if (musb->config &&
+	    musb->config->host_port_deassert_reset_at_resume)
+		musb_port_reset(musb, false);
+
+	return 0;
+}
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+
+#define MUSB_USB_DMA_ALIGN 4
+
+struct musb_temp_buffer {
+	void *kmalloc_ptr;
+	void *old_xfer_buffer;
+	u8 data[];
+};
+
+static void musb_free_temp_buffer(struct urb *urb)
+{
+	enum dma_data_direction dir;
+	struct musb_temp_buffer *temp;
+	size_t length;
+
+	if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
+		return;
+
+	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+	temp = container_of(urb->transfer_buffer, struct musb_temp_buffer,
+			    data);
+
+	if (dir == DMA_FROM_DEVICE) {
+		if (usb_pipeisoc(urb->pipe))
+			length = urb->transfer_buffer_length;
+		else
+			length = urb->actual_length;
+
+		memcpy(temp->old_xfer_buffer, temp->data, length);
+	}
+	urb->transfer_buffer = temp->old_xfer_buffer;
+	kfree(temp->kmalloc_ptr);
+
+	urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
+}
+
+static int musb_alloc_temp_buffer(struct urb *urb, gfp_t mem_flags)
+{
+	enum dma_data_direction dir;
+	struct musb_temp_buffer *temp;
+	void *kmalloc_ptr;
+	size_t kmalloc_size;
+
+	if (urb->num_sgs || urb->sg ||
+	    urb->transfer_buffer_length == 0 ||
+	    !((uintptr_t)urb->transfer_buffer & (MUSB_USB_DMA_ALIGN - 1)))
+		return 0;
+
+	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+	/* Allocate a buffer with enough padding for alignment */
+	kmalloc_size = urb->transfer_buffer_length +
+		sizeof(struct musb_temp_buffer) + MUSB_USB_DMA_ALIGN - 1;
+
+	kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
+	if (!kmalloc_ptr)
+		return -ENOMEM;
+
+	/* Position our struct temp_buffer such that data is aligned */
+	temp = PTR_ALIGN(kmalloc_ptr, MUSB_USB_DMA_ALIGN);
+
+
+	temp->kmalloc_ptr = kmalloc_ptr;
+	temp->old_xfer_buffer = urb->transfer_buffer;
+	if (dir == DMA_TO_DEVICE)
+		memcpy(temp->data, urb->transfer_buffer,
+		       urb->transfer_buffer_length);
+	urb->transfer_buffer = temp->data;
+
+	urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;
+
+	return 0;
+}
+
+static int musb_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+				      gfp_t mem_flags)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+	int ret;
+
+	/*
+	 * The DMA engine in RTL1.8 and above cannot handle
+	 * DMA addresses that are not aligned to a 4 byte boundary.
+	 * For such engine implemented (un)map_urb_for_dma hooks.
+	 * Do not use these hooks for RTL<1.8
+	 */
+	if (musb->hwvers < MUSB_HWVERS_1800)
+		return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+
+	ret = musb_alloc_temp_buffer(urb, mem_flags);
+	if (ret)
+		return ret;
+
+	ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+	if (ret)
+		musb_free_temp_buffer(urb);
+
+	return ret;
+}
+
+static void musb_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	usb_hcd_unmap_urb_for_dma(hcd, urb);
+
+	/* Do not use this hook for RTL<1.8 (see description above) */
+	if (musb->hwvers < MUSB_HWVERS_1800)
+		return;
+
+	musb_free_temp_buffer(urb);
+}
+#endif /* !CONFIG_MUSB_PIO_ONLY */
+
+static const struct hc_driver musb_hc_driver = {
+	.description		= "musb-hcd",
+	.product_desc		= "MUSB HDRC host driver",
+	.hcd_priv_size		= sizeof(struct musb *),
+	.flags			= HCD_USB2 | HCD_DMA | HCD_MEMORY,
+
+	/* not using irq handler or reset hooks from usbcore, since
+	 * those must be shared with peripheral code for OTG configs
+	 */
+
+	.start			= musb_h_start,
+	.stop			= musb_h_stop,
+
+	.get_frame_number	= musb_h_get_frame_number,
+
+	.urb_enqueue		= musb_urb_enqueue,
+	.urb_dequeue		= musb_urb_dequeue,
+	.endpoint_disable	= musb_h_disable,
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+	.map_urb_for_dma	= musb_map_urb_for_dma,
+	.unmap_urb_for_dma	= musb_unmap_urb_for_dma,
+#endif
+
+	.hub_status_data	= musb_hub_status_data,
+	.hub_control		= musb_hub_control,
+	.bus_suspend		= musb_bus_suspend,
+	.bus_resume		= musb_bus_resume,
+	/* .start_port_reset	= NULL, */
+	/* .hub_irq_enable	= NULL, */
+};
+
+int musb_host_alloc(struct musb *musb)
+{
+	struct device	*dev = musb->controller;
+
+	/* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
+	musb->hcd = usb_create_hcd(&musb_hc_driver, dev, dev_name(dev));
+	if (!musb->hcd)
+		return -EINVAL;
+
+	*musb->hcd->hcd_priv = (unsigned long) musb;
+	musb->hcd->self.uses_pio_for_control = 1;
+	musb->hcd->uses_new_polling = 1;
+	musb->hcd->has_tt = 1;
+
+	return 0;
+}
+
+void musb_host_cleanup(struct musb *musb)
+{
+	if (musb->port_mode == MUSB_PERIPHERAL)
+		return;
+	usb_remove_hcd(musb->hcd);
+}
+
+void musb_host_free(struct musb *musb)
+{
+	usb_put_hcd(musb->hcd);
+}
+
+int musb_host_setup(struct musb *musb, int power_budget)
+{
+	int ret;
+	struct usb_hcd *hcd = musb->hcd;
+
+	if (musb->port_mode == MUSB_HOST) {
+		MUSB_HST_MODE(musb);
+		musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+	}
+	otg_set_host(musb->xceiv->otg, &hcd->self);
+	/* don't support otg protocols */
+	hcd->self.otg_port = 0;
+	musb->xceiv->otg->host = &hcd->self;
+	hcd->power_budget = 2 * (power_budget ? : 250);
+	hcd->skip_phy_initialization = 1;
+
+	ret = usb_add_hcd(hcd, 0, 0);
+	if (ret < 0)
+		return ret;
+
+	device_wakeup_enable(hcd->self.controller);
+	return 0;
+}
+
+void musb_host_resume_root_hub(struct musb *musb)
+{
+	usb_hcd_resume_root_hub(musb->hcd);
+}
+
+void musb_host_poke_root_hub(struct musb *musb)
+{
+	MUSB_HST_MODE(musb);
+	if (musb->hcd->status_urb)
+		usb_hcd_poll_rh_status(musb->hcd);
+	else
+		usb_hcd_resume_root_hub(musb->hcd);
+}
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
new file mode 100644
index 000000000..63298bd23
--- /dev/null
+++ b/drivers/usb/musb/musb_host.h
@@ -0,0 +1,124 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * MUSB OTG driver host defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ */
+
+#ifndef _MUSB_HOST_H
+#define _MUSB_HOST_H
+
+#include <linux/scatterlist.h>
+
+/* stored in "usb_host_endpoint.hcpriv" for scheduled endpoints */
+struct musb_qh {
+	struct usb_host_endpoint *hep;		/* usbcore info */
+	struct usb_device	*dev;
+	struct musb_hw_ep	*hw_ep;		/* current binding */
+
+	struct list_head	ring;		/* of musb_qh */
+	/* struct musb_qh		*next; */	/* for periodic tree */
+	u8			mux;		/* qh multiplexed to hw_ep */
+
+	unsigned		offset;		/* in urb->transfer_buffer */
+	unsigned		segsize;	/* current xfer fragment */
+
+	u8			type_reg;	/* {rx,tx} type register */
+	u8			intv_reg;	/* {rx,tx} interval register */
+	u8			addr_reg;	/* device address register */
+	u8			h_addr_reg;	/* hub address register */
+	u8			h_port_reg;	/* hub port register */
+
+	u8			is_ready;	/* safe to modify hw_ep */
+	u8			type;		/* XFERTYPE_* */
+	u8			epnum;
+	u8			hb_mult;	/* high bandwidth pkts per uf */
+	u16			maxpacket;
+	u16			frame;		/* for periodic schedule */
+	unsigned		iso_idx;	/* in urb->iso_frame_desc[] */
+	struct sg_mapping_iter sg_miter;	/* for highmem in PIO mode */
+	bool			use_sg;		/* to track urb using sglist */
+};
+
+/* map from control or bulk queue head to the first qh on that ring */
+static inline struct musb_qh *first_qh(struct list_head *q)
+{
+	if (list_empty(q))
+		return NULL;
+	return list_entry(q->next, struct musb_qh, ring);
+}
+
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HOST) || IS_ENABLED(CONFIG_USB_MUSB_DUAL_ROLE)
+extern struct musb *hcd_to_musb(struct usb_hcd *);
+extern irqreturn_t musb_h_ep0_irq(struct musb *);
+extern int musb_host_alloc(struct musb *);
+extern int musb_host_setup(struct musb *, int);
+extern void musb_host_cleanup(struct musb *);
+extern void musb_host_tx(struct musb *, u8);
+extern void musb_host_rx(struct musb *, u8);
+extern void musb_root_disconnect(struct musb *musb);
+extern void musb_host_free(struct musb *);
+extern void musb_host_resume_root_hub(struct musb *musb);
+extern void musb_host_poke_root_hub(struct musb *musb);
+extern int musb_port_suspend(struct musb *musb, bool do_suspend);
+extern void musb_port_reset(struct musb *musb, bool do_reset);
+extern void musb_host_finish_resume(struct work_struct *work);
+#else
+static inline struct musb *hcd_to_musb(struct usb_hcd *hcd)
+{
+	return NULL;
+}
+
+static inline irqreturn_t musb_h_ep0_irq(struct musb *musb)
+{
+	return 0;
+}
+
+static inline int musb_host_alloc(struct musb *musb)
+{
+	return 0;
+}
+
+static inline int musb_host_setup(struct musb *musb, int power_budget)
+{
+	return 0;
+}
+
+static inline void musb_host_cleanup(struct musb *musb)		{}
+static inline void musb_host_free(struct musb *musb)		{}
+static inline void musb_host_tx(struct musb *musb, u8 epnum)	{}
+static inline void musb_host_rx(struct musb *musb, u8 epnum)	{}
+static inline void musb_root_disconnect(struct musb *musb)	{}
+static inline void musb_host_resume_root_hub(struct musb *musb)	{}
+static inline void musb_host_poke_root_hub(struct musb *musb)	{}
+static inline int musb_port_suspend(struct musb *musb, bool do_suspend)
+{
+	return 0;
+}
+static inline void musb_port_reset(struct musb *musb, bool do_reset) {}
+static inline void musb_host_finish_resume(struct work_struct *work) {}
+#endif
+
+struct usb_hcd;
+
+extern int musb_hub_status_data(struct usb_hcd *hcd, char *buf);
+extern int musb_hub_control(struct usb_hcd *hcd,
+			u16 typeReq, u16 wValue, u16 wIndex,
+			char *buf, u16 wLength);
+
+static inline struct urb *next_urb(struct musb_qh *qh)
+{
+	struct list_head	*queue;
+
+	if (!qh)
+		return NULL;
+	queue = &qh->hep->urb_list;
+	if (list_empty(queue))
+		return NULL;
+	return list_entry(queue->next, struct urb, urb_list);
+}
+
+#endif				/* _MUSB_HOST_H */
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
new file mode 100644
index 000000000..12874d3b2
--- /dev/null
+++ b/drivers/usb/musb/musb_io.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * MUSB OTG driver register I/O
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ */
+
+#ifndef __MUSB_LINUX_PLATFORM_ARCH_H__
+#define __MUSB_LINUX_PLATFORM_ARCH_H__
+
+#include <linux/io.h>
+
+#define musb_ep_select(_mbase, _epnum)	musb->io.ep_select((_mbase), (_epnum))
+
+/**
+ * struct musb_io - IO functions for MUSB
+ * @ep_offset:	platform specific function to get end point offset
+ * @ep_select:	platform specific function to select end point
+ * @fifo_offset: platform specific function to get fifo offset
+ * @read_fifo:	platform specific function to read fifo
+ * @write_fifo:	platform specific function to write fifo
+ * @busctl_offset: platform specific function to get busctl offset
+ * @get_toggle: platform specific function to get toggle
+ * @set_toggle: platform specific function to set toggle
+ */
+struct musb_io {
+	u32	(*ep_offset)(u8 epnum, u16 offset);
+	void	(*ep_select)(void __iomem *mbase, u8 epnum);
+	u32	(*fifo_offset)(u8 epnum);
+	void	(*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf);
+	void	(*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf);
+	u32	(*busctl_offset)(u8 epnum, u16 offset);
+	u16	(*get_toggle)(struct musb_qh *qh, int is_out);
+	u16	(*set_toggle)(struct musb_qh *qh, int is_out, struct urb *urb);
+};
+
+/* Do not add new entries here, add them the struct musb_io instead */
+extern u8 (*musb_readb)(void __iomem *addr, u32 offset);
+extern void (*musb_writeb)(void __iomem *addr, u32 offset, u8 data);
+extern u8 (*musb_clearb)(void __iomem *addr, u32 offset);
+extern u16 (*musb_readw)(void __iomem *addr, u32 offset);
+extern void (*musb_writew)(void __iomem *addr, u32 offset, u16 data);
+extern u16 (*musb_clearw)(void __iomem *addr, u32 offset);
+extern u32 musb_readl(void __iomem *addr, u32 offset);
+extern void musb_writel(void __iomem *addr, u32 offset, u32 data);
+
+#endif
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
new file mode 100644
index 000000000..5fa110978
--- /dev/null
+++ b/drivers/usb/musb/musb_regs.h
@@ -0,0 +1,362 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * MUSB OTG driver register defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ */
+
+#ifndef __MUSB_REGS_H__
+#define __MUSB_REGS_H__
+
+#define MUSB_EP0_FIFOSIZE	64	/* This is non-configurable */
+
+/*
+ * MUSB Register bits
+ */
+
+/* POWER */
+#define MUSB_POWER_ISOUPDATE	0x80
+#define MUSB_POWER_SOFTCONN	0x40
+#define MUSB_POWER_HSENAB	0x20
+#define MUSB_POWER_HSMODE	0x10
+#define MUSB_POWER_RESET	0x08
+#define MUSB_POWER_RESUME	0x04
+#define MUSB_POWER_SUSPENDM	0x02
+#define MUSB_POWER_ENSUSPEND	0x01
+
+/* INTRUSB */
+#define MUSB_INTR_SUSPEND	0x01
+#define MUSB_INTR_RESUME	0x02
+#define MUSB_INTR_RESET		0x04
+#define MUSB_INTR_BABBLE	0x04
+#define MUSB_INTR_SOF		0x08
+#define MUSB_INTR_CONNECT	0x10
+#define MUSB_INTR_DISCONNECT	0x20
+#define MUSB_INTR_SESSREQ	0x40
+#define MUSB_INTR_VBUSERROR	0x80	/* For SESSION end */
+
+/* DEVCTL */
+#define MUSB_DEVCTL_BDEVICE	0x80
+#define MUSB_DEVCTL_FSDEV	0x40
+#define MUSB_DEVCTL_LSDEV	0x20
+#define MUSB_DEVCTL_VBUS	0x18
+#define MUSB_DEVCTL_VBUS_SHIFT	3
+#define MUSB_DEVCTL_HM		0x04
+#define MUSB_DEVCTL_HR		0x02
+#define MUSB_DEVCTL_SESSION	0x01
+
+/* BABBLE_CTL */
+#define MUSB_BABBLE_FORCE_TXIDLE	0x80
+#define MUSB_BABBLE_SW_SESSION_CTRL	0x40
+#define MUSB_BABBLE_STUCK_J		0x20
+#define MUSB_BABBLE_RCV_DISABLE		0x04
+
+/* MUSB ULPI VBUSCONTROL */
+#define MUSB_ULPI_USE_EXTVBUS	0x01
+#define MUSB_ULPI_USE_EXTVBUSIND 0x02
+/* ULPI_REG_CONTROL */
+#define MUSB_ULPI_REG_REQ	(1 << 0)
+#define MUSB_ULPI_REG_CMPLT	(1 << 1)
+#define MUSB_ULPI_RDN_WR	(1 << 2)
+
+/* TESTMODE */
+#define MUSB_TEST_FORCE_HOST	0x80
+#define MUSB_TEST_FIFO_ACCESS	0x40
+#define MUSB_TEST_FORCE_FS	0x20
+#define MUSB_TEST_FORCE_HS	0x10
+#define MUSB_TEST_PACKET	0x08
+#define MUSB_TEST_K		0x04
+#define MUSB_TEST_J		0x02
+#define MUSB_TEST_SE0_NAK	0x01
+
+/* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
+#define MUSB_FIFOSZ_DPB	0x10
+/* Allocation size (8, 16, 32, ... 4096) */
+#define MUSB_FIFOSZ_SIZE	0x0f
+
+/* CSR0 */
+#define MUSB_CSR0_FLUSHFIFO	0x0100
+#define MUSB_CSR0_TXPKTRDY	0x0002
+#define MUSB_CSR0_RXPKTRDY	0x0001
+
+/* CSR0 in Peripheral mode */
+#define MUSB_CSR0_P_SVDSETUPEND	0x0080
+#define MUSB_CSR0_P_SVDRXPKTRDY	0x0040
+#define MUSB_CSR0_P_SENDSTALL	0x0020
+#define MUSB_CSR0_P_SETUPEND	0x0010
+#define MUSB_CSR0_P_DATAEND	0x0008
+#define MUSB_CSR0_P_SENTSTALL	0x0004
+
+/* CSR0 in Host mode */
+#define MUSB_CSR0_H_DIS_PING		0x0800
+#define MUSB_CSR0_H_WR_DATATOGGLE	0x0400	/* Set to allow setting: */
+#define MUSB_CSR0_H_DATATOGGLE		0x0200	/* Data toggle control */
+#define MUSB_CSR0_H_NAKTIMEOUT		0x0080
+#define MUSB_CSR0_H_STATUSPKT		0x0040
+#define MUSB_CSR0_H_REQPKT		0x0020
+#define MUSB_CSR0_H_ERROR		0x0010
+#define MUSB_CSR0_H_SETUPPKT		0x0008
+#define MUSB_CSR0_H_RXSTALL		0x0004
+
+/* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_CSR0_P_WZC_BITS	\
+	(MUSB_CSR0_P_SENTSTALL)
+#define MUSB_CSR0_H_WZC_BITS	\
+	(MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
+	| MUSB_CSR0_RXPKTRDY)
+
+/* TxType/RxType */
+#define MUSB_TYPE_SPEED		0xc0
+#define MUSB_TYPE_SPEED_SHIFT	6
+#define MUSB_TYPE_PROTO		0x30	/* Implicitly zero for ep0 */
+#define MUSB_TYPE_PROTO_SHIFT	4
+#define MUSB_TYPE_REMOTE_END	0xf	/* Implicitly zero for ep0 */
+
+/* CONFIGDATA */
+#define MUSB_CONFIGDATA_MPRXE		0x80	/* Auto bulk pkt combining */
+#define MUSB_CONFIGDATA_MPTXE		0x40	/* Auto bulk pkt splitting */
+#define MUSB_CONFIGDATA_BIGENDIAN	0x20
+#define MUSB_CONFIGDATA_HBRXE		0x10	/* HB-ISO for RX */
+#define MUSB_CONFIGDATA_HBTXE		0x08	/* HB-ISO for TX */
+#define MUSB_CONFIGDATA_DYNFIFO		0x04	/* Dynamic FIFO sizing */
+#define MUSB_CONFIGDATA_SOFTCONE	0x02	/* SoftConnect */
+#define MUSB_CONFIGDATA_UTMIDW		0x01	/* Data width 0/1 => 8/16bits */
+
+/* TXCSR in Peripheral and Host mode */
+#define MUSB_TXCSR_AUTOSET		0x8000
+#define MUSB_TXCSR_DMAENAB		0x1000
+#define MUSB_TXCSR_FRCDATATOG		0x0800
+#define MUSB_TXCSR_DMAMODE		0x0400
+#define MUSB_TXCSR_CLRDATATOG		0x0040
+#define MUSB_TXCSR_FLUSHFIFO		0x0008
+#define MUSB_TXCSR_FIFONOTEMPTY		0x0002
+#define MUSB_TXCSR_TXPKTRDY		0x0001
+
+/* TXCSR in Peripheral mode */
+#define MUSB_TXCSR_P_ISO		0x4000
+#define MUSB_TXCSR_P_INCOMPTX		0x0080
+#define MUSB_TXCSR_P_SENTSTALL		0x0020
+#define MUSB_TXCSR_P_SENDSTALL		0x0010
+#define MUSB_TXCSR_P_UNDERRUN		0x0004
+
+/* TXCSR in Host mode */
+#define MUSB_TXCSR_H_WR_DATATOGGLE	0x0200
+#define MUSB_TXCSR_H_DATATOGGLE		0x0100
+#define MUSB_TXCSR_H_NAKTIMEOUT		0x0080
+#define MUSB_TXCSR_H_RXSTALL		0x0020
+#define MUSB_TXCSR_H_ERROR		0x0004
+
+/* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_TXCSR_P_WZC_BITS	\
+	(MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
+	| MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
+#define MUSB_TXCSR_H_WZC_BITS	\
+	(MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
+	| MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
+
+/* RXCSR in Peripheral and Host mode */
+#define MUSB_RXCSR_AUTOCLEAR		0x8000
+#define MUSB_RXCSR_DMAENAB		0x2000
+#define MUSB_RXCSR_DISNYET		0x1000
+#define MUSB_RXCSR_PID_ERR		0x1000
+#define MUSB_RXCSR_DMAMODE		0x0800
+#define MUSB_RXCSR_INCOMPRX		0x0100
+#define MUSB_RXCSR_CLRDATATOG		0x0080
+#define MUSB_RXCSR_FLUSHFIFO		0x0010
+#define MUSB_RXCSR_DATAERROR		0x0008
+#define MUSB_RXCSR_FIFOFULL		0x0002
+#define MUSB_RXCSR_RXPKTRDY		0x0001
+
+/* RXCSR in Peripheral mode */
+#define MUSB_RXCSR_P_ISO		0x4000
+#define MUSB_RXCSR_P_SENTSTALL		0x0040
+#define MUSB_RXCSR_P_SENDSTALL		0x0020
+#define MUSB_RXCSR_P_OVERRUN		0x0004
+
+/* RXCSR in Host mode */
+#define MUSB_RXCSR_H_AUTOREQ		0x4000
+#define MUSB_RXCSR_H_WR_DATATOGGLE	0x0400
+#define MUSB_RXCSR_H_DATATOGGLE		0x0200
+#define MUSB_RXCSR_H_RXSTALL		0x0040
+#define MUSB_RXCSR_H_REQPKT		0x0020
+#define MUSB_RXCSR_H_ERROR		0x0004
+
+/* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_RXCSR_P_WZC_BITS	\
+	(MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
+	| MUSB_RXCSR_RXPKTRDY)
+#define MUSB_RXCSR_H_WZC_BITS	\
+	(MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
+	| MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)
+
+/* HUBADDR */
+#define MUSB_HUBADDR_MULTI_TT		0x80
+
+
+/*
+ * Common USB registers
+ */
+
+#define MUSB_FADDR		0x00	/* 8-bit */
+#define MUSB_POWER		0x01	/* 8-bit */
+
+#define MUSB_INTRTX		0x02	/* 16-bit */
+#define MUSB_INTRRX		0x04
+#define MUSB_INTRTXE		0x06
+#define MUSB_INTRRXE		0x08
+#define MUSB_INTRUSB		0x0A	/* 8 bit */
+#define MUSB_INTRUSBE		0x0B	/* 8 bit */
+#define MUSB_FRAME		0x0C
+#define MUSB_INDEX		0x0E	/* 8 bit */
+#define MUSB_TESTMODE		0x0F	/* 8 bit */
+
+/*
+ * Additional Control Registers
+ */
+
+#define MUSB_DEVCTL		0x60	/* 8 bit */
+#define MUSB_BABBLE_CTL		0x61	/* 8 bit */
+
+/* These are always controlled through the INDEX register */
+#define MUSB_TXFIFOSZ		0x62	/* 8-bit (see masks) */
+#define MUSB_RXFIFOSZ		0x63	/* 8-bit (see masks) */
+#define MUSB_TXFIFOADD		0x64	/* 16-bit offset shifted right 3 */
+#define MUSB_RXFIFOADD		0x66	/* 16-bit offset shifted right 3 */
+
+/* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
+#define MUSB_HWVERS		0x6C	/* 8 bit */
+#define MUSB_ULPI_BUSCONTROL	0x70	/* 8 bit */
+#define MUSB_ULPI_INT_MASK	0x72	/* 8 bit */
+#define MUSB_ULPI_INT_SRC	0x73	/* 8 bit */
+#define MUSB_ULPI_REG_DATA	0x74	/* 8 bit */
+#define MUSB_ULPI_REG_ADDR	0x75	/* 8 bit */
+#define MUSB_ULPI_REG_CONTROL	0x76	/* 8 bit */
+#define MUSB_ULPI_RAW_DATA	0x77	/* 8 bit */
+
+#define MUSB_EPINFO		0x78	/* 8 bit */
+#define MUSB_RAMINFO		0x79	/* 8 bit */
+#define MUSB_LINKINFO		0x7a	/* 8 bit */
+#define MUSB_VPLEN		0x7b	/* 8 bit */
+#define MUSB_HS_EOF1		0x7c	/* 8 bit */
+#define MUSB_FS_EOF1		0x7d	/* 8 bit */
+#define MUSB_LS_EOF1		0x7e	/* 8 bit */
+
+/* Offsets to endpoint registers */
+#define MUSB_TXMAXP		0x00
+#define MUSB_TXCSR		0x02
+#define MUSB_CSR0		MUSB_TXCSR	/* Re-used for EP0 */
+#define MUSB_RXMAXP		0x04
+#define MUSB_RXCSR		0x06
+#define MUSB_RXCOUNT		0x08
+#define MUSB_COUNT0		MUSB_RXCOUNT	/* Re-used for EP0 */
+#define MUSB_TXTYPE		0x0A
+#define MUSB_TYPE0		MUSB_TXTYPE	/* Re-used for EP0 */
+#define MUSB_TXINTERVAL		0x0B
+#define MUSB_NAKLIMIT0		MUSB_TXINTERVAL	/* Re-used for EP0 */
+#define MUSB_RXTYPE		0x0C
+#define MUSB_RXINTERVAL		0x0D
+#define MUSB_FIFOSIZE		0x0F
+#define MUSB_CONFIGDATA		MUSB_FIFOSIZE	/* Re-used for EP0 */
+
+#include "tusb6010.h"		/* Needed "only" for TUSB_EP0_CONF */
+
+#define MUSB_TXCSR_MODE			0x2000
+
+/* "bus control"/target registers, for host side multipoint (external hubs) */
+#define MUSB_TXFUNCADDR		0x00
+#define MUSB_TXHUBADDR		0x02
+#define MUSB_TXHUBPORT		0x03
+
+#define MUSB_RXFUNCADDR		0x04
+#define MUSB_RXHUBADDR		0x06
+#define MUSB_RXHUBPORT		0x07
+
+static inline u8 musb_read_configdata(void __iomem *mbase)
+{
+	musb_writeb(mbase, MUSB_INDEX, 0);
+	return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
+}
+
+static inline void musb_write_rxfunaddr(struct musb *musb, u8 epnum,
+		u8 qh_addr_reg)
+{
+	musb_writeb(musb->mregs,
+		    musb->io.busctl_offset(epnum, MUSB_RXFUNCADDR),
+		    qh_addr_reg);
+}
+
+static inline void musb_write_rxhubaddr(struct musb *musb, u8 epnum,
+		u8 qh_h_addr_reg)
+{
+	musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_RXHUBADDR),
+			qh_h_addr_reg);
+}
+
+static inline void musb_write_rxhubport(struct musb *musb, u8 epnum,
+		u8 qh_h_port_reg)
+{
+	musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_RXHUBPORT),
+			qh_h_port_reg);
+}
+
+static inline void musb_write_txfunaddr(struct musb *musb, u8 epnum,
+		u8 qh_addr_reg)
+{
+	musb_writeb(musb->mregs,
+		    musb->io.busctl_offset(epnum, MUSB_TXFUNCADDR),
+		    qh_addr_reg);
+}
+
+static inline void musb_write_txhubaddr(struct musb *musb, u8 epnum,
+		u8 qh_addr_reg)
+{
+	musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_TXHUBADDR),
+			qh_addr_reg);
+}
+
+static inline void musb_write_txhubport(struct musb *musb, u8 epnum,
+		u8 qh_h_port_reg)
+{
+	musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_TXHUBPORT),
+			qh_h_port_reg);
+}
+
+static inline u8 musb_read_rxfunaddr(struct musb *musb, u8 epnum)
+{
+	return musb_readb(musb->mregs,
+			  musb->io.busctl_offset(epnum, MUSB_RXFUNCADDR));
+}
+
+static inline u8 musb_read_rxhubaddr(struct musb *musb, u8 epnum)
+{
+	return musb_readb(musb->mregs,
+			  musb->io.busctl_offset(epnum, MUSB_RXHUBADDR));
+}
+
+static inline u8 musb_read_rxhubport(struct musb *musb, u8 epnum)
+{
+	return musb_readb(musb->mregs,
+			  musb->io.busctl_offset(epnum, MUSB_RXHUBPORT));
+}
+
+static inline u8 musb_read_txfunaddr(struct musb *musb, u8 epnum)
+{
+	return musb_readb(musb->mregs,
+			  musb->io.busctl_offset(epnum, MUSB_TXFUNCADDR));
+}
+
+static inline u8 musb_read_txhubaddr(struct musb *musb, u8 epnum)
+{
+	return musb_readb(musb->mregs,
+			  musb->io.busctl_offset(epnum, MUSB_TXHUBADDR));
+}
+
+static inline u8 musb_read_txhubport(struct musb *musb, u8 epnum)
+{
+	return musb_readb(musb->mregs,
+			  musb->io.busctl_offset(epnum, MUSB_TXHUBPORT));
+}
+
+#endif	/* __MUSB_REGS_H__ */
diff --git a/drivers/usb/musb/musb_trace.c b/drivers/usb/musb/musb_trace.c
new file mode 100644
index 000000000..476872adc
--- /dev/null
+++ b/drivers/usb/musb/musb_trace.c
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * musb_trace.c - MUSB Controller Trace Support
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Bin Liu <b-liu@ti.com>
+ */
+
+#define CREATE_TRACE_POINTS
+#include "musb_trace.h"
+
+void musb_dbg(struct musb *musb, const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+
+	va_start(args, fmt);
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	trace_musb_log(musb, &vaf);
+
+	va_end(args);
+}
diff --git a/drivers/usb/musb/musb_trace.h b/drivers/usb/musb/musb_trace.h
new file mode 100644
index 000000000..f246b1439
--- /dev/null
+++ b/drivers/usb/musb/musb_trace.h
@@ -0,0 +1,389 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * musb_trace.h - MUSB Controller Trace Support
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Bin Liu <b-liu@ti.com>
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM musb
+
+#if !defined(__MUSB_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define __MUSB_TRACE_H
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+#include <linux/usb.h>
+#include "musb_core.h"
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+#include "cppi_dma.h"
+#endif
+
+#define MUSB_MSG_MAX   500
+
+TRACE_EVENT(musb_log,
+	TP_PROTO(struct musb *musb, struct va_format *vaf),
+	TP_ARGS(musb, vaf),
+	TP_STRUCT__entry(
+		__string(name, dev_name(musb->controller))
+		__vstring(msg, vaf->fmt, vaf->va)
+	),
+	TP_fast_assign(
+		__assign_str(name, dev_name(musb->controller));
+		__assign_vstr(msg, vaf->fmt, vaf->va);
+	),
+	TP_printk("%s: %s", __get_str(name), __get_str(msg))
+);
+
+TRACE_EVENT(musb_state,
+	TP_PROTO(struct musb *musb, u8 devctl, const char *desc),
+	TP_ARGS(musb, devctl, desc),
+	TP_STRUCT__entry(
+		__string(name, dev_name(musb->controller))
+		__field(u8, devctl)
+		__string(desc, desc)
+	),
+	TP_fast_assign(
+		__assign_str(name, dev_name(musb->controller));
+		__entry->devctl = devctl;
+		__assign_str(desc, desc);
+	),
+	TP_printk("%s: devctl: %02x %s", __get_str(name), __entry->devctl,
+		  __get_str(desc))
+);
+
+DECLARE_EVENT_CLASS(musb_regb,
+	TP_PROTO(void *caller, const void  __iomem *addr,
+		 unsigned int offset, u8 data),
+	TP_ARGS(caller, addr, offset, data),
+	TP_STRUCT__entry(
+		__field(void *, caller)
+		__field(const void __iomem *, addr)
+		__field(unsigned int, offset)
+		__field(u8, data)
+	),
+	TP_fast_assign(
+		__entry->caller = caller;
+		__entry->addr = addr;
+		__entry->offset = offset;
+		__entry->data = data;
+	),
+	TP_printk("%pS: %p + %04x: %02x",
+		__entry->caller, __entry->addr, __entry->offset, __entry->data)
+);
+
+DEFINE_EVENT(musb_regb, musb_readb,
+	TP_PROTO(void *caller, const void __iomem *addr,
+		 unsigned int offset, u8 data),
+	TP_ARGS(caller, addr, offset, data)
+);
+
+DEFINE_EVENT(musb_regb, musb_writeb,
+	TP_PROTO(void *caller, const void __iomem *addr,
+		 unsigned int offset, u8 data),
+	TP_ARGS(caller, addr, offset, data)
+);
+
+DECLARE_EVENT_CLASS(musb_regw,
+	TP_PROTO(void *caller, const void __iomem *addr,
+		 unsigned int offset, u16 data),
+	TP_ARGS(caller, addr, offset, data),
+	TP_STRUCT__entry(
+		__field(void *, caller)
+		__field(const void __iomem *, addr)
+		__field(unsigned int, offset)
+		__field(u16, data)
+	),
+	TP_fast_assign(
+		__entry->caller = caller;
+		__entry->addr = addr;
+		__entry->offset = offset;
+		__entry->data = data;
+	),
+	TP_printk("%pS: %p + %04x: %04x",
+		__entry->caller, __entry->addr, __entry->offset, __entry->data)
+);
+
+DEFINE_EVENT(musb_regw, musb_readw,
+	TP_PROTO(void *caller, const void __iomem *addr,
+		 unsigned int offset, u16 data),
+	TP_ARGS(caller, addr, offset, data)
+);
+
+DEFINE_EVENT(musb_regw, musb_writew,
+	TP_PROTO(void *caller, const void __iomem *addr,
+		 unsigned int offset, u16 data),
+	TP_ARGS(caller, addr, offset, data)
+);
+
+DECLARE_EVENT_CLASS(musb_regl,
+	TP_PROTO(void *caller, const void __iomem *addr,
+		 unsigned int offset, u32 data),
+	TP_ARGS(caller, addr, offset, data),
+	TP_STRUCT__entry(
+		__field(void *, caller)
+		__field(const void __iomem *, addr)
+		__field(unsigned int, offset)
+		__field(u32, data)
+	),
+	TP_fast_assign(
+		__entry->caller = caller;
+		__entry->addr = addr;
+		__entry->offset = offset;
+		__entry->data = data;
+	),
+	TP_printk("%pS: %p + %04x: %08x",
+		__entry->caller, __entry->addr, __entry->offset, __entry->data)
+);
+
+DEFINE_EVENT(musb_regl, musb_readl,
+	TP_PROTO(void *caller, const void __iomem *addr,
+		 unsigned int offset, u32 data),
+	TP_ARGS(caller, addr, offset, data)
+);
+
+DEFINE_EVENT(musb_regl, musb_writel,
+	TP_PROTO(void *caller, const void __iomem *addr,
+		 unsigned int offset, u32 data),
+	TP_ARGS(caller, addr, offset, data)
+);
+
+TRACE_EVENT(musb_isr,
+	TP_PROTO(struct musb *musb),
+	TP_ARGS(musb),
+	TP_STRUCT__entry(
+		__string(name, dev_name(musb->controller))
+		__field(u8, int_usb)
+		__field(u16, int_tx)
+		__field(u16, int_rx)
+	),
+	TP_fast_assign(
+		__assign_str(name, dev_name(musb->controller));
+		__entry->int_usb = musb->int_usb;
+		__entry->int_tx = musb->int_tx;
+		__entry->int_rx = musb->int_rx;
+	),
+	TP_printk("%s: usb %02x, tx %04x, rx %04x",
+		__get_str(name), __entry->int_usb,
+		__entry->int_tx, __entry->int_rx
+	)
+);
+
+DECLARE_EVENT_CLASS(musb_urb,
+	TP_PROTO(struct musb *musb, struct urb *urb),
+	TP_ARGS(musb, urb),
+	TP_STRUCT__entry(
+		__string(name, dev_name(musb->controller))
+		__field(struct urb *, urb)
+		__field(unsigned int, pipe)
+		__field(int, status)
+		__field(unsigned int, flag)
+		__field(u32, buf_len)
+		__field(u32, actual_len)
+	),
+	TP_fast_assign(
+		__assign_str(name, dev_name(musb->controller));
+		__entry->urb = urb;
+		__entry->pipe = urb->pipe;
+		__entry->status = urb->status;
+		__entry->flag = urb->transfer_flags;
+		__entry->buf_len = urb->transfer_buffer_length;
+		__entry->actual_len = urb->actual_length;
+	),
+	TP_printk("%s: %p, dev%d ep%d%s, flag 0x%x, len %d/%d, status %d",
+			__get_str(name), __entry->urb,
+			usb_pipedevice(__entry->pipe),
+			usb_pipeendpoint(__entry->pipe),
+			usb_pipein(__entry->pipe) ? "in" : "out",
+			__entry->flag,
+			__entry->actual_len, __entry->buf_len,
+			__entry->status
+	)
+);
+
+DEFINE_EVENT(musb_urb, musb_urb_start,
+	TP_PROTO(struct musb *musb, struct urb *urb),
+	TP_ARGS(musb, urb)
+);
+
+DEFINE_EVENT(musb_urb, musb_urb_gb,
+	TP_PROTO(struct musb *musb, struct urb *urb),
+	TP_ARGS(musb, urb)
+);
+
+DEFINE_EVENT(musb_urb, musb_urb_rx,
+	TP_PROTO(struct musb *musb, struct urb *urb),
+	TP_ARGS(musb, urb)
+);
+
+DEFINE_EVENT(musb_urb, musb_urb_tx,
+	TP_PROTO(struct musb *musb, struct urb *urb),
+	TP_ARGS(musb, urb)
+);
+
+DEFINE_EVENT(musb_urb, musb_urb_enq,
+	TP_PROTO(struct musb *musb, struct urb *urb),
+	TP_ARGS(musb, urb)
+);
+
+DEFINE_EVENT(musb_urb, musb_urb_deq,
+	TP_PROTO(struct musb *musb, struct urb *urb),
+	TP_ARGS(musb, urb)
+);
+
+DECLARE_EVENT_CLASS(musb_req,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req),
+	TP_STRUCT__entry(
+		__field(struct usb_request *, req)
+		__field(u8, is_tx)
+		__field(u8, epnum)
+		__field(int, status)
+		__field(unsigned int, buf_len)
+		__field(unsigned int, actual_len)
+		__field(unsigned int, zero)
+		__field(unsigned int, short_not_ok)
+		__field(unsigned int, no_interrupt)
+	),
+	TP_fast_assign(
+		__entry->req = &req->request;
+		__entry->is_tx = req->tx;
+		__entry->epnum = req->epnum;
+		__entry->status = req->request.status;
+		__entry->buf_len = req->request.length;
+		__entry->actual_len = req->request.actual;
+		__entry->zero = req->request.zero;
+		__entry->short_not_ok = req->request.short_not_ok;
+		__entry->no_interrupt = req->request.no_interrupt;
+	),
+	TP_printk("%p, ep%d %s, %s%s%s, len %d/%d, status %d",
+			__entry->req, __entry->epnum,
+			__entry->is_tx ? "tx/IN" : "rx/OUT",
+			__entry->zero ? "Z" : "z",
+			__entry->short_not_ok ? "S" : "s",
+			__entry->no_interrupt ? "I" : "i",
+			__entry->actual_len, __entry->buf_len,
+			__entry->status
+	)
+);
+
+DEFINE_EVENT(musb_req, musb_req_gb,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(musb_req, musb_req_tx,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(musb_req, musb_req_rx,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(musb_req, musb_req_alloc,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(musb_req, musb_req_free,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(musb_req, musb_req_start,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(musb_req, musb_req_enq,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(musb_req, musb_req_deq,
+	TP_PROTO(struct musb_request *req),
+	TP_ARGS(req)
+);
+
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+DECLARE_EVENT_CLASS(musb_cppi41,
+	TP_PROTO(struct cppi41_dma_channel *ch),
+	TP_ARGS(ch),
+	TP_STRUCT__entry(
+		__field(struct cppi41_dma_channel *, ch)
+		__string(name, dev_name(ch->hw_ep->musb->controller))
+		__field(u8, hwep)
+		__field(u8, port)
+		__field(u8, is_tx)
+		__field(u32, len)
+		__field(u32, prog_len)
+		__field(u32, xferred)
+	),
+	TP_fast_assign(
+		__entry->ch = ch;
+		__assign_str(name, dev_name(ch->hw_ep->musb->controller));
+		__entry->hwep = ch->hw_ep->epnum;
+		__entry->port = ch->port_num;
+		__entry->is_tx = ch->is_tx;
+		__entry->len = ch->total_len;
+		__entry->prog_len = ch->prog_len;
+		__entry->xferred = ch->transferred;
+	),
+	TP_printk("%s: %p, hwep%d ch%d%s, prog_len %d, len %d/%d",
+			__get_str(name), __entry->ch, __entry->hwep,
+			__entry->port, __entry->is_tx ? "tx" : "rx",
+			__entry->prog_len, __entry->xferred, __entry->len
+	)
+);
+
+DEFINE_EVENT(musb_cppi41, musb_cppi41_done,
+	TP_PROTO(struct cppi41_dma_channel *ch),
+	TP_ARGS(ch)
+);
+
+DEFINE_EVENT(musb_cppi41, musb_cppi41_gb,
+	TP_PROTO(struct cppi41_dma_channel *ch),
+	TP_ARGS(ch)
+);
+
+DEFINE_EVENT(musb_cppi41, musb_cppi41_config,
+	TP_PROTO(struct cppi41_dma_channel *ch),
+	TP_ARGS(ch)
+);
+
+DEFINE_EVENT(musb_cppi41, musb_cppi41_cont,
+	TP_PROTO(struct cppi41_dma_channel *ch),
+	TP_ARGS(ch)
+);
+
+DEFINE_EVENT(musb_cppi41, musb_cppi41_alloc,
+	TP_PROTO(struct cppi41_dma_channel *ch),
+	TP_ARGS(ch)
+);
+
+DEFINE_EVENT(musb_cppi41, musb_cppi41_abort,
+	TP_PROTO(struct cppi41_dma_channel *ch),
+	TP_ARGS(ch)
+);
+
+DEFINE_EVENT(musb_cppi41, musb_cppi41_free,
+	TP_PROTO(struct cppi41_dma_channel *ch),
+	TP_ARGS(ch)
+);
+#endif /* CONFIG_USB_TI_CPPI41_DMA */
+
+#endif /* __MUSB_TRACE_H */
+
+/* this part has to be here */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE musb_trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
new file mode 100644
index 000000000..cafc69536
--- /dev/null
+++ b/drivers/usb/musb/musb_virthub.c
@@ -0,0 +1,440 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MUSB OTG driver virtual root hub support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+
+#include <asm/unaligned.h>
+
+#include "musb_core.h"
+
+void musb_host_finish_resume(struct work_struct *work)
+{
+	struct musb *musb;
+	unsigned long flags;
+	u8 power;
+
+	musb = container_of(work, struct musb, finish_resume_work.work);
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	power = musb_readb(musb->mregs, MUSB_POWER);
+	power &= ~MUSB_POWER_RESUME;
+	musb_dbg(musb, "root port resume stopped, power %02x", power);
+	musb_writeb(musb->mregs, MUSB_POWER, power);
+
+	/*
+	 * ISSUE:  DaVinci (RTL 1.300) disconnects after
+	 * resume of high speed peripherals (but not full
+	 * speed ones).
+	 */
+	musb->is_active = 1;
+	musb->port1_status &= ~(USB_PORT_STAT_SUSPEND | MUSB_PORT_STAT_RESUME);
+	musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+	usb_hcd_poll_rh_status(musb->hcd);
+	/* NOTE: it might really be A_WAIT_BCON ... */
+	musb->xceiv->otg->state = OTG_STATE_A_HOST;
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+int musb_port_suspend(struct musb *musb, bool do_suspend)
+{
+	struct usb_otg	*otg = musb->xceiv->otg;
+	u8		power;
+	void __iomem	*mbase = musb->mregs;
+
+	if (!is_host_active(musb))
+		return 0;
+
+	/* NOTE:  this doesn't necessarily put PHY into low power mode,
+	 * turning off its clock; that's a function of PHY integration and
+	 * MUSB_POWER_ENSUSPEND.  PHY may need a clock (sigh) to detect
+	 * SE0 changing to connect (J) or wakeup (K) states.
+	 */
+	power = musb_readb(mbase, MUSB_POWER);
+	if (do_suspend) {
+		int retries = 10000;
+
+		if (power & MUSB_POWER_RESUME)
+			return -EBUSY;
+
+		if (!(power & MUSB_POWER_SUSPENDM)) {
+			power |= MUSB_POWER_SUSPENDM;
+			musb_writeb(mbase, MUSB_POWER, power);
+
+			/* Needed for OPT A tests */
+			power = musb_readb(mbase, MUSB_POWER);
+			while (power & MUSB_POWER_SUSPENDM) {
+				power = musb_readb(mbase, MUSB_POWER);
+				if (retries-- < 1)
+					break;
+			}
+		}
+
+		musb_dbg(musb, "Root port suspended, power %02x", power);
+
+		musb->port1_status |= USB_PORT_STAT_SUSPEND;
+		switch (musb->xceiv->otg->state) {
+		case OTG_STATE_A_HOST:
+			musb->xceiv->otg->state = OTG_STATE_A_SUSPEND;
+			musb->is_active = otg->host->b_hnp_enable;
+			if (musb->is_active)
+				mod_timer(&musb->otg_timer, jiffies
+					+ msecs_to_jiffies(
+						OTG_TIME_A_AIDL_BDIS));
+			musb_platform_try_idle(musb, 0);
+			break;
+		case OTG_STATE_B_HOST:
+			musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON;
+			musb->is_active = otg->host->b_hnp_enable;
+			musb_platform_try_idle(musb, 0);
+			break;
+		default:
+			musb_dbg(musb, "bogus rh suspend? %s",
+				usb_otg_state_string(musb->xceiv->otg->state));
+		}
+	} else if (power & MUSB_POWER_SUSPENDM) {
+		power &= ~MUSB_POWER_SUSPENDM;
+		power |= MUSB_POWER_RESUME;
+		musb_writeb(mbase, MUSB_POWER, power);
+
+		musb_dbg(musb, "Root port resuming, power %02x", power);
+
+		musb->port1_status |= MUSB_PORT_STAT_RESUME;
+		schedule_delayed_work(&musb->finish_resume_work,
+				      msecs_to_jiffies(USB_RESUME_TIMEOUT));
+	}
+	return 0;
+}
+
+void musb_port_reset(struct musb *musb, bool do_reset)
+{
+	u8		power;
+	void __iomem	*mbase = musb->mregs;
+
+	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE) {
+		musb_dbg(musb, "HNP: Returning from HNP; no hub reset from b_idle");
+		musb->port1_status &= ~USB_PORT_STAT_RESET;
+		return;
+	}
+
+	if (!is_host_active(musb))
+		return;
+
+	/* NOTE:  caller guarantees it will turn off the reset when
+	 * the appropriate amount of time has passed
+	 */
+	power = musb_readb(mbase, MUSB_POWER);
+	if (do_reset) {
+		/*
+		 * If RESUME is set, we must make sure it stays minimum 20 ms.
+		 * Then we must clear RESUME and wait a bit to let musb start
+		 * generating SOFs. If we don't do this, OPT HS A 6.8 tests
+		 * fail with "Error! Did not receive an SOF before suspend
+		 * detected".
+		 */
+		if (power &  MUSB_POWER_RESUME) {
+			long remain = (unsigned long) musb->rh_timer - jiffies;
+
+			if (musb->rh_timer > 0 && remain > 0) {
+				/* take into account the minimum delay after resume */
+				schedule_delayed_work(
+					&musb->deassert_reset_work, remain);
+				return;
+			}
+
+			musb_writeb(mbase, MUSB_POWER,
+				    power & ~MUSB_POWER_RESUME);
+
+			/* Give the core 1 ms to clear MUSB_POWER_RESUME */
+			schedule_delayed_work(&musb->deassert_reset_work,
+					      msecs_to_jiffies(1));
+			return;
+		}
+
+		power &= 0xf0;
+		musb_writeb(mbase, MUSB_POWER,
+				power | MUSB_POWER_RESET);
+
+		musb->port1_status |= USB_PORT_STAT_RESET;
+		musb->port1_status &= ~USB_PORT_STAT_ENABLE;
+		schedule_delayed_work(&musb->deassert_reset_work,
+				      msecs_to_jiffies(50));
+	} else {
+		musb_dbg(musb, "root port reset stopped");
+		musb_platform_pre_root_reset_end(musb);
+		musb_writeb(mbase, MUSB_POWER,
+				power & ~MUSB_POWER_RESET);
+		musb_platform_post_root_reset_end(musb);
+
+		power = musb_readb(mbase, MUSB_POWER);
+		if (power & MUSB_POWER_HSMODE) {
+			musb_dbg(musb, "high-speed device connected");
+			musb->port1_status |= USB_PORT_STAT_HIGH_SPEED;
+		}
+
+		musb->port1_status &= ~USB_PORT_STAT_RESET;
+		musb->port1_status |= USB_PORT_STAT_ENABLE
+					| (USB_PORT_STAT_C_RESET << 16)
+					| (USB_PORT_STAT_C_ENABLE << 16);
+		usb_hcd_poll_rh_status(musb->hcd);
+
+		musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+	}
+}
+
+void musb_root_disconnect(struct musb *musb)
+{
+	struct usb_otg	*otg = musb->xceiv->otg;
+
+	musb->port1_status = USB_PORT_STAT_POWER
+			| (USB_PORT_STAT_C_CONNECTION << 16);
+
+	usb_hcd_poll_rh_status(musb->hcd);
+	musb->is_active = 0;
+
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_A_SUSPEND:
+		if (otg->host->b_hnp_enable) {
+			musb->xceiv->otg->state = OTG_STATE_A_PERIPHERAL;
+			musb->g.is_a_peripheral = 1;
+			break;
+		}
+		fallthrough;
+	case OTG_STATE_A_HOST:
+		musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
+		musb->is_active = 0;
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+		break;
+	default:
+		musb_dbg(musb, "host disconnect (%s)",
+			usb_otg_state_string(musb->xceiv->otg->state));
+	}
+}
+EXPORT_SYMBOL_GPL(musb_root_disconnect);
+
+
+/*---------------------------------------------------------------------*/
+
+/* Caller may or may not hold musb->lock */
+int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+	int		retval = 0;
+
+	/* called in_irq() via usb_hcd_poll_rh_status() */
+	if (musb->port1_status & 0xffff0000) {
+		*buf = 0x02;
+		retval = 1;
+	}
+	return retval;
+}
+
+static int musb_has_gadget(struct musb *musb)
+{
+	/*
+	 * In host-only mode we start a connection right away. In OTG mode
+	 * we have to wait until we loaded a gadget. We don't really need a
+	 * gadget if we operate as a host but we should not start a session
+	 * as a device without a gadget or else we explode.
+	 */
+#ifdef CONFIG_USB_MUSB_HOST
+	return 1;
+#else
+	return musb->port_mode == MUSB_HOST;
+#endif
+}
+
+int musb_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+	u32		temp;
+	int		retval = 0;
+	unsigned long	flags;
+	bool		start_musb = false;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) {
+		spin_unlock_irqrestore(&musb->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	/* hub features:  always zero, setting is a NOP
+	 * port features: reported, sometimes updated when host is active
+	 * no indicators
+	 */
+	switch (typeReq) {
+	case ClearHubFeature:
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if ((wIndex & 0xff) != 1)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			musb_port_suspend(musb, false);
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (!hcd->self.is_b_host)
+				musb_platform_set_vbus(musb, 0);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+		case USB_PORT_FEAT_C_RESET:
+		case USB_PORT_FEAT_C_SUSPEND:
+			break;
+		default:
+			goto error;
+		}
+		musb_dbg(musb, "clear feature %d", wValue);
+		musb->port1_status &= ~(1 << wValue);
+		break;
+	case GetHubDescriptor:
+		{
+		struct usb_hub_descriptor *desc = (void *)buf;
+
+		desc->bDescLength = 9;
+		desc->bDescriptorType = USB_DT_HUB;
+		desc->bNbrPorts = 1;
+		desc->wHubCharacteristics = cpu_to_le16(
+			HUB_CHAR_INDV_PORT_LPSM /* per-port power switching */
+			| HUB_CHAR_NO_OCPM	/* no overcurrent reporting */
+			);
+		desc->bPwrOn2PwrGood = 5;	/* msec/2 */
+		desc->bHubContrCurrent = 0;
+
+		/* workaround bogus struct definition */
+		desc->u.hs.DeviceRemovable[0] = 0x02;	/* port 1 */
+		desc->u.hs.DeviceRemovable[1] = 0xff;
+		}
+		break;
+	case GetHubStatus:
+		temp = 0;
+		*(__le32 *) buf = cpu_to_le32(temp);
+		break;
+	case GetPortStatus:
+		if (wIndex != 1)
+			goto error;
+
+		put_unaligned(cpu_to_le32(musb->port1_status
+					& ~MUSB_PORT_STAT_RESUME),
+				(__le32 *) buf);
+
+		/* port change status is more interesting */
+		musb_dbg(musb, "port status %08x", musb->port1_status);
+		break;
+	case SetPortFeature:
+		if ((wIndex & 0xff) != 1)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_POWER:
+			/* NOTE: this controller has a strange state machine
+			 * that involves "requesting sessions" according to
+			 * magic side effects from incompletely-described
+			 * rules about startup...
+			 *
+			 * This call is what really starts the host mode; be
+			 * very careful about side effects if you reorder any
+			 * initialization logic, e.g. for OTG, or change any
+			 * logic relating to VBUS power-up.
+			 */
+			if (!hcd->self.is_b_host && musb_has_gadget(musb))
+				start_musb = true;
+			break;
+		case USB_PORT_FEAT_RESET:
+			musb_port_reset(musb, true);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			musb_port_suspend(musb, true);
+			break;
+		case USB_PORT_FEAT_TEST:
+			if (unlikely(is_host_active(musb)))
+				goto error;
+
+			wIndex >>= 8;
+			switch (wIndex) {
+			case USB_TEST_J:
+				pr_debug("USB_TEST_J\n");
+				temp = MUSB_TEST_J;
+				break;
+			case USB_TEST_K:
+				pr_debug("USB_TEST_K\n");
+				temp = MUSB_TEST_K;
+				break;
+			case USB_TEST_SE0_NAK:
+				pr_debug("USB_TEST_SE0_NAK\n");
+				temp = MUSB_TEST_SE0_NAK;
+				break;
+			case USB_TEST_PACKET:
+				pr_debug("USB_TEST_PACKET\n");
+				temp = MUSB_TEST_PACKET;
+				musb_load_testpacket(musb);
+				break;
+			case USB_TEST_FORCE_ENABLE:
+				pr_debug("USB_TEST_FORCE_ENABLE\n");
+				temp = MUSB_TEST_FORCE_HOST
+					| MUSB_TEST_FORCE_HS;
+
+				musb_writeb(musb->mregs, MUSB_DEVCTL,
+						MUSB_DEVCTL_SESSION);
+				break;
+			case 6:
+				pr_debug("TEST_FIFO_ACCESS\n");
+				temp = MUSB_TEST_FIFO_ACCESS;
+				break;
+			default:
+				goto error;
+			}
+			musb_writeb(musb->mregs, MUSB_TESTMODE, temp);
+			break;
+		default:
+			goto error;
+		}
+		musb_dbg(musb, "set feature %d", wValue);
+		musb->port1_status |= 1 << wValue;
+		break;
+
+	default:
+error:
+		/* "protocol stall" on error */
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (start_musb)
+		musb_start(musb);
+
+	return retval;
+}
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
new file mode 100644
index 000000000..7acd16358
--- /dev/null
+++ b/drivers/usb/musb/musbhsdma.c
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MUSB OTG driver - support for Mentor's DMA controller
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2007 by Texas Instruments
+ */
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include "musb_core.h"
+#include "musb_dma.h"
+
+#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset)		\
+		(MUSB_HSDMA_BASE + (_bchannel << 4) + _offset)
+
+#define musb_read_hsdma_addr(mbase, bchannel)	\
+	musb_readl(mbase,	\
+		   MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS))
+
+#define musb_write_hsdma_addr(mbase, bchannel, addr) \
+	musb_writel(mbase, \
+		    MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS), \
+		    addr)
+
+#define musb_read_hsdma_count(mbase, bchannel)	\
+	musb_readl(mbase,	\
+		   MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT))
+
+#define musb_write_hsdma_count(mbase, bchannel, len) \
+	musb_writel(mbase, \
+		    MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \
+		    len)
+/* control register (16-bit): */
+#define MUSB_HSDMA_ENABLE_SHIFT		0
+#define MUSB_HSDMA_TRANSMIT_SHIFT	1
+#define MUSB_HSDMA_MODE1_SHIFT		2
+#define MUSB_HSDMA_IRQENABLE_SHIFT	3
+#define MUSB_HSDMA_ENDPOINT_SHIFT	4
+#define MUSB_HSDMA_BUSERROR_SHIFT	8
+#define MUSB_HSDMA_BURSTMODE_SHIFT	9
+#define MUSB_HSDMA_BURSTMODE		(3 << MUSB_HSDMA_BURSTMODE_SHIFT)
+#define MUSB_HSDMA_BURSTMODE_UNSPEC	0
+#define MUSB_HSDMA_BURSTMODE_INCR4	1
+#define MUSB_HSDMA_BURSTMODE_INCR8	2
+#define MUSB_HSDMA_BURSTMODE_INCR16	3
+
+#define MUSB_HSDMA_CHANNELS		8
+
+struct musb_dma_controller;
+
+struct musb_dma_channel {
+	struct dma_channel		channel;
+	struct musb_dma_controller	*controller;
+	u32				start_addr;
+	u32				len;
+	u16				max_packet_sz;
+	u8				idx;
+	u8				epnum;
+	u8				transmit;
+};
+
+struct musb_dma_controller {
+	struct dma_controller		controller;
+	struct musb_dma_channel		channel[MUSB_HSDMA_CHANNELS];
+	void				*private_data;
+	void __iomem			*base;
+	u8				channel_count;
+	u8				used_channels;
+	int				irq;
+};
+
+static void dma_channel_release(struct dma_channel *channel);
+
+static void dma_controller_stop(struct musb_dma_controller *controller)
+{
+	struct musb *musb = controller->private_data;
+	struct dma_channel *channel;
+	u8 bit;
+
+	if (controller->used_channels != 0) {
+		dev_err(musb->controller,
+			"Stopping DMA controller while channel active\n");
+
+		for (bit = 0; bit < MUSB_HSDMA_CHANNELS; bit++) {
+			if (controller->used_channels & (1 << bit)) {
+				channel = &controller->channel[bit].channel;
+				dma_channel_release(channel);
+
+				if (!controller->used_channels)
+					break;
+			}
+		}
+	}
+}
+
+static struct dma_channel *dma_channel_allocate(struct dma_controller *c,
+				struct musb_hw_ep *hw_ep, u8 transmit)
+{
+	struct musb_dma_controller *controller = container_of(c,
+			struct musb_dma_controller, controller);
+	struct musb_dma_channel *musb_channel = NULL;
+	struct dma_channel *channel = NULL;
+	u8 bit;
+
+	for (bit = 0; bit < MUSB_HSDMA_CHANNELS; bit++) {
+		if (!(controller->used_channels & (1 << bit))) {
+			controller->used_channels |= (1 << bit);
+			musb_channel = &(controller->channel[bit]);
+			musb_channel->controller = controller;
+			musb_channel->idx = bit;
+			musb_channel->epnum = hw_ep->epnum;
+			musb_channel->transmit = transmit;
+			channel = &(musb_channel->channel);
+			channel->private_data = musb_channel;
+			channel->status = MUSB_DMA_STATUS_FREE;
+			channel->max_len = 0x100000;
+			/* Tx => mode 1; Rx => mode 0 */
+			channel->desired_mode = transmit;
+			channel->actual_len = 0;
+			break;
+		}
+	}
+
+	return channel;
+}
+
+static void dma_channel_release(struct dma_channel *channel)
+{
+	struct musb_dma_channel *musb_channel = channel->private_data;
+
+	channel->actual_len = 0;
+	musb_channel->start_addr = 0;
+	musb_channel->len = 0;
+
+	musb_channel->controller->used_channels &=
+		~(1 << musb_channel->idx);
+
+	channel->status = MUSB_DMA_STATUS_UNKNOWN;
+}
+
+static void configure_channel(struct dma_channel *channel,
+				u16 packet_sz, u8 mode,
+				dma_addr_t dma_addr, u32 len)
+{
+	struct musb_dma_channel *musb_channel = channel->private_data;
+	struct musb_dma_controller *controller = musb_channel->controller;
+	struct musb *musb = controller->private_data;
+	void __iomem *mbase = controller->base;
+	u8 bchannel = musb_channel->idx;
+	u16 csr = 0;
+
+	musb_dbg(musb, "%p, pkt_sz %d, addr %pad, len %d, mode %d",
+			channel, packet_sz, &dma_addr, len, mode);
+
+	if (mode) {
+		csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
+		BUG_ON(len < packet_sz);
+	}
+	csr |= MUSB_HSDMA_BURSTMODE_INCR16
+				<< MUSB_HSDMA_BURSTMODE_SHIFT;
+
+	csr |= (musb_channel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
+		| (1 << MUSB_HSDMA_ENABLE_SHIFT)
+		| (1 << MUSB_HSDMA_IRQENABLE_SHIFT)
+		| (musb_channel->transmit
+				? (1 << MUSB_HSDMA_TRANSMIT_SHIFT)
+				: 0);
+
+	/* address/count */
+	musb_write_hsdma_addr(mbase, bchannel, dma_addr);
+	musb_write_hsdma_count(mbase, bchannel, len);
+
+	/* control (this should start things) */
+	musb_writew(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_CONTROL),
+		csr);
+}
+
+static int dma_channel_program(struct dma_channel *channel,
+				u16 packet_sz, u8 mode,
+				dma_addr_t dma_addr, u32 len)
+{
+	struct musb_dma_channel *musb_channel = channel->private_data;
+	struct musb_dma_controller *controller = musb_channel->controller;
+	struct musb *musb = controller->private_data;
+
+	musb_dbg(musb, "ep%d-%s pkt_sz %d, dma_addr %pad length %d, mode %d",
+		musb_channel->epnum,
+		musb_channel->transmit ? "Tx" : "Rx",
+		packet_sz, &dma_addr, len, mode);
+
+	BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
+		channel->status == MUSB_DMA_STATUS_BUSY);
+
+	/*
+	 * The DMA engine in RTL1.8 and above cannot handle
+	 * DMA addresses that are not aligned to a 4 byte boundary.
+	 * It ends up masking the last two bits of the address
+	 * programmed in DMA_ADDR.
+	 *
+	 * Fail such DMA transfers, so that the backup PIO mode
+	 * can carry out the transfer
+	 */
+	if ((musb->hwvers >= MUSB_HWVERS_1800) && (dma_addr % 4))
+		return false;
+
+	channel->actual_len = 0;
+	musb_channel->start_addr = dma_addr;
+	musb_channel->len = len;
+	musb_channel->max_packet_sz = packet_sz;
+	channel->status = MUSB_DMA_STATUS_BUSY;
+
+	configure_channel(channel, packet_sz, mode, dma_addr, len);
+
+	return true;
+}
+
+static int dma_channel_abort(struct dma_channel *channel)
+{
+	struct musb_dma_channel *musb_channel = channel->private_data;
+	void __iomem *mbase = musb_channel->controller->base;
+	struct musb *musb = musb_channel->controller->private_data;
+
+	u8 bchannel = musb_channel->idx;
+	int offset;
+	u16 csr;
+
+	if (channel->status == MUSB_DMA_STATUS_BUSY) {
+		if (musb_channel->transmit) {
+			offset = musb->io.ep_offset(musb_channel->epnum,
+						MUSB_TXCSR);
+
+			/*
+			 * The programming guide says that we must clear
+			 * the DMAENAB bit before the DMAMODE bit...
+			 */
+			csr = musb_readw(mbase, offset);
+			csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+			musb_writew(mbase, offset, csr);
+			csr &= ~MUSB_TXCSR_DMAMODE;
+			musb_writew(mbase, offset, csr);
+		} else {
+			offset = musb->io.ep_offset(musb_channel->epnum,
+						MUSB_RXCSR);
+
+			csr = musb_readw(mbase, offset);
+			csr &= ~(MUSB_RXCSR_AUTOCLEAR |
+				 MUSB_RXCSR_DMAENAB |
+				 MUSB_RXCSR_DMAMODE);
+			musb_writew(mbase, offset, csr);
+		}
+
+		musb_writew(mbase,
+			MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_CONTROL),
+			0);
+		musb_write_hsdma_addr(mbase, bchannel, 0);
+		musb_write_hsdma_count(mbase, bchannel, 0);
+		channel->status = MUSB_DMA_STATUS_FREE;
+	}
+
+	return 0;
+}
+
+irqreturn_t dma_controller_irq(int irq, void *private_data)
+{
+	struct musb_dma_controller *controller = private_data;
+	struct musb *musb = controller->private_data;
+	struct musb_dma_channel *musb_channel;
+	struct dma_channel *channel;
+
+	void __iomem *mbase = controller->base;
+
+	irqreturn_t retval = IRQ_NONE;
+
+	unsigned long flags;
+
+	u8 bchannel;
+	u8 int_hsdma;
+
+	u32 addr, count;
+	u16 csr;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	int_hsdma = musb_clearb(mbase, MUSB_HSDMA_INTR);
+
+	if (!int_hsdma) {
+		musb_dbg(musb, "spurious DMA irq");
+
+		for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) {
+			musb_channel = (struct musb_dma_channel *)
+					&(controller->channel[bchannel]);
+			channel = &musb_channel->channel;
+			if (channel->status == MUSB_DMA_STATUS_BUSY) {
+				count = musb_read_hsdma_count(mbase, bchannel);
+
+				if (count == 0)
+					int_hsdma |= (1 << bchannel);
+			}
+		}
+
+		musb_dbg(musb, "int_hsdma = 0x%x", int_hsdma);
+
+		if (!int_hsdma)
+			goto done;
+	}
+
+	for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) {
+		if (int_hsdma & (1 << bchannel)) {
+			musb_channel = (struct musb_dma_channel *)
+					&(controller->channel[bchannel]);
+			channel = &musb_channel->channel;
+
+			csr = musb_readw(mbase,
+					MUSB_HSDMA_CHANNEL_OFFSET(bchannel,
+							MUSB_HSDMA_CONTROL));
+
+			if (csr & (1 << MUSB_HSDMA_BUSERROR_SHIFT)) {
+				musb_channel->channel.status =
+					MUSB_DMA_STATUS_BUS_ABORT;
+			} else {
+				addr = musb_read_hsdma_addr(mbase,
+						bchannel);
+				channel->actual_len = addr
+					- musb_channel->start_addr;
+
+				musb_dbg(musb, "ch %p, 0x%x -> 0x%x (%zu / %d) %s",
+					channel, musb_channel->start_addr,
+					addr, channel->actual_len,
+					musb_channel->len,
+					(channel->actual_len
+						< musb_channel->len) ?
+					"=> reconfig 0" : "=> complete");
+
+				channel->status = MUSB_DMA_STATUS_FREE;
+
+				/* completed */
+				if (musb_channel->transmit &&
+					(!channel->desired_mode ||
+					(channel->actual_len %
+					    musb_channel->max_packet_sz))) {
+					u8  epnum  = musb_channel->epnum;
+					int offset = musb->io.ep_offset(epnum,
+								    MUSB_TXCSR);
+					u16 txcsr;
+
+					/*
+					 * The programming guide says that we
+					 * must clear DMAENAB before DMAMODE.
+					 */
+					musb_ep_select(mbase, epnum);
+					txcsr = musb_readw(mbase, offset);
+					if (channel->desired_mode == 1) {
+						txcsr &= ~(MUSB_TXCSR_DMAENAB
+							| MUSB_TXCSR_AUTOSET);
+						musb_writew(mbase, offset, txcsr);
+						/* Send out the packet */
+						txcsr &= ~MUSB_TXCSR_DMAMODE;
+						txcsr |= MUSB_TXCSR_DMAENAB;
+					}
+					txcsr |=  MUSB_TXCSR_TXPKTRDY;
+					musb_writew(mbase, offset, txcsr);
+				}
+				musb_dma_completion(musb, musb_channel->epnum,
+						    musb_channel->transmit);
+			}
+		}
+	}
+
+	retval = IRQ_HANDLED;
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(dma_controller_irq);
+
+void musbhs_dma_controller_destroy(struct dma_controller *c)
+{
+	struct musb_dma_controller *controller = container_of(c,
+			struct musb_dma_controller, controller);
+
+	dma_controller_stop(controller);
+
+	if (controller->irq)
+		free_irq(controller->irq, c);
+
+	kfree(controller);
+}
+EXPORT_SYMBOL_GPL(musbhs_dma_controller_destroy);
+
+static struct musb_dma_controller *
+dma_controller_alloc(struct musb *musb, void __iomem *base)
+{
+	struct musb_dma_controller *controller;
+
+	controller = kzalloc(sizeof(*controller), GFP_KERNEL);
+	if (!controller)
+		return NULL;
+
+	controller->channel_count = MUSB_HSDMA_CHANNELS;
+	controller->private_data = musb;
+	controller->base = base;
+
+	controller->controller.channel_alloc = dma_channel_allocate;
+	controller->controller.channel_release = dma_channel_release;
+	controller->controller.channel_program = dma_channel_program;
+	controller->controller.channel_abort = dma_channel_abort;
+	return controller;
+}
+
+struct dma_controller *
+musbhs_dma_controller_create(struct musb *musb, void __iomem *base)
+{
+	struct musb_dma_controller *controller;
+	struct device *dev = musb->controller;
+	struct platform_device *pdev = to_platform_device(dev);
+	int irq = platform_get_irq_byname(pdev, "dma");
+
+	if (irq <= 0) {
+		dev_err(dev, "No DMA interrupt line!\n");
+		return NULL;
+	}
+
+	controller = dma_controller_alloc(musb, base);
+	if (!controller)
+		return NULL;
+
+	if (request_irq(irq, dma_controller_irq, 0,
+			dev_name(musb->controller), controller)) {
+		dev_err(dev, "request_irq %d failed!\n", irq);
+		musb_dma_controller_destroy(&controller->controller);
+
+		return NULL;
+	}
+
+	controller->irq = irq;
+
+	return &controller->controller;
+}
+EXPORT_SYMBOL_GPL(musbhs_dma_controller_create);
+
+struct dma_controller *
+musbhs_dma_controller_create_noirq(struct musb *musb, void __iomem *base)
+{
+	struct musb_dma_controller *controller;
+
+	controller = dma_controller_alloc(musb, base);
+	if (!controller)
+		return NULL;
+
+	return &controller->controller;
+}
+EXPORT_SYMBOL_GPL(musbhs_dma_controller_create_noirq);
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
new file mode 100644
index 000000000..44a21ec86
--- /dev/null
+++ b/drivers/usb/musb/omap2430.c
@@ -0,0 +1,625 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005-2007 by Texas Instruments
+ * Some code has been taken from tusb6010.c
+ * Copyrights for that are attributable to:
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/pm_runtime.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/usb/musb.h>
+#include <linux/phy/omap_control_phy.h>
+#include <linux/of_platform.h>
+
+#include "musb_core.h"
+#include "omap2430.h"
+
+struct omap2430_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	enum musb_vbus_id_status status;
+	struct work_struct	omap_musb_mailbox_work;
+	struct device		*control_otghs;
+	unsigned int		is_runtime_suspended:1;
+	unsigned int		needs_resume:1;
+	unsigned int		phy_suspended:1;
+};
+#define glue_to_musb(g)		platform_get_drvdata(g->musb)
+
+static struct omap2430_glue	*_glue;
+
+static inline void omap2430_low_level_exit(struct musb *musb)
+{
+	u32 l;
+
+	/* in any role */
+	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
+	l |= ENABLEFORCE;	/* enable MSTANDBY */
+	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+}
+
+static inline void omap2430_low_level_init(struct musb *musb)
+{
+	u32 l;
+
+	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
+	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
+	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+}
+
+static int omap2430_musb_mailbox(enum musb_vbus_id_status status)
+{
+	struct omap2430_glue	*glue = _glue;
+
+	if (!glue) {
+		pr_err("%s: musb core is not yet initialized\n", __func__);
+		return -EPROBE_DEFER;
+	}
+	glue->status = status;
+
+	if (!glue_to_musb(glue)) {
+		pr_err("%s: musb core is not yet ready\n", __func__);
+		return -EPROBE_DEFER;
+	}
+
+	schedule_work(&glue->omap_musb_mailbox_work);
+
+	return 0;
+}
+
+/*
+ * HDRC controls CPEN, but beware current surges during device connect.
+ * They can trigger transient overcurrent conditions that must be ignored.
+ *
+ * Note that we're skipping A_WAIT_VFALL -> A_IDLE and jumping right to B_IDLE
+ * as set by musb_set_peripheral().
+ */
+static void omap_musb_set_mailbox(struct omap2430_glue *glue)
+{
+	struct musb *musb = glue_to_musb(glue);
+	int error;
+
+	pm_runtime_get_sync(musb->controller);
+
+	dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
+		usb_otg_state_string(musb->xceiv->otg->state),
+		musb_readb(musb->mregs, MUSB_DEVCTL));
+
+	switch (glue->status) {
+	case MUSB_ID_GROUND:
+		dev_dbg(musb->controller, "ID GND\n");
+		switch (musb->xceiv->otg->state) {
+		case OTG_STATE_A_IDLE:
+			error = musb_set_host(musb);
+			if (error)
+				break;
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+			fallthrough;
+		case OTG_STATE_A_WAIT_VRISE:
+		case OTG_STATE_A_WAIT_BCON:
+		case OTG_STATE_A_HOST:
+			/*
+			 * On multiple ID ground interrupts just keep enabling
+			 * VBUS. At least cpcap VBUS shuts down otherwise.
+			 */
+			otg_set_vbus(musb->xceiv->otg, 1);
+			break;
+		default:
+			musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+			musb->xceiv->last_event = USB_EVENT_ID;
+			if (musb->gadget_driver) {
+				omap_control_usb_set_mode(glue->control_otghs,
+							  USB_MODE_HOST);
+				otg_set_vbus(musb->xceiv->otg, 1);
+			}
+			break;
+		}
+		break;
+
+	case MUSB_VBUS_VALID:
+		dev_dbg(musb->controller, "VBUS Connect\n");
+
+		musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+		musb->xceiv->last_event = USB_EVENT_VBUS;
+		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
+		break;
+
+	case MUSB_ID_FLOAT:
+	case MUSB_VBUS_OFF:
+		dev_dbg(musb->controller, "VBUS Disconnect\n");
+
+		musb->xceiv->last_event = USB_EVENT_NONE;
+		musb_set_peripheral(musb);
+		otg_set_vbus(musb->xceiv->otg, 0);
+		omap_control_usb_set_mode(glue->control_otghs,
+			USB_MODE_DISCONNECT);
+		break;
+	default:
+		dev_dbg(musb->controller, "ID float\n");
+	}
+	pm_runtime_mark_last_busy(musb->controller);
+	pm_runtime_put_autosuspend(musb->controller);
+	atomic_notifier_call_chain(&musb->xceiv->notifier,
+			musb->xceiv->last_event, NULL);
+}
+
+
+static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
+{
+	struct omap2430_glue *glue = container_of(mailbox_work,
+				struct omap2430_glue, omap_musb_mailbox_work);
+
+	omap_musb_set_mailbox(glue);
+}
+
+static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
+{
+	unsigned long   flags;
+	irqreturn_t     retval = IRQ_NONE;
+	struct musb     *musb = __hci;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+	if (musb->int_usb || musb->int_tx || musb->int_rx)
+		retval = musb_interrupt(musb);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return retval;
+}
+
+static int omap2430_musb_init(struct musb *musb)
+{
+	u32 l;
+	int status = 0;
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
+	struct omap_musb_board_data *data = plat->board_data;
+
+	/* We require some kind of external transceiver, hooked
+	 * up through ULPI.  TWL4030-family PMICs include one,
+	 * which needs a driver, drivers aren't always needed.
+	 */
+	musb->phy = devm_phy_get(dev->parent, "usb2-phy");
+
+	/* We can't totally remove musb->xceiv as of now because
+	 * musb core uses xceiv.state and xceiv.otg. Once we have
+	 * a separate state machine to handle otg, these can be moved
+	 * out of xceiv and then we can start using the generic PHY
+	 * framework
+	 */
+	musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "usb-phy", 0);
+
+	if (IS_ERR(musb->xceiv)) {
+		status = PTR_ERR(musb->xceiv);
+
+		if (status == -ENXIO)
+			return status;
+
+		dev_dbg(dev, "HS USB OTG: no transceiver configured\n");
+		return -EPROBE_DEFER;
+	}
+
+	if (IS_ERR(musb->phy)) {
+		dev_err(dev, "HS USB OTG: no PHY configured\n");
+		return PTR_ERR(musb->phy);
+	}
+	musb->isr = omap2430_musb_interrupt;
+	phy_init(musb->phy);
+	phy_power_on(musb->phy);
+
+	l = musb_readl(musb->mregs, OTG_INTERFSEL);
+
+	if (data->interface_type == MUSB_INTERFACE_UTMI) {
+		/* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
+		l &= ~ULPI_12PIN;       /* Disable ULPI */
+		l |= UTMI_8BIT;         /* Enable UTMI  */
+	} else {
+		l |= ULPI_12PIN;
+	}
+
+	musb_writel(musb->mregs, OTG_INTERFSEL, l);
+
+	dev_dbg(dev, "HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
+			"sysstatus 0x%x, intrfsel 0x%x, simenable  0x%x\n",
+			musb_readl(musb->mregs, OTG_REVISION),
+			musb_readl(musb->mregs, OTG_SYSCONFIG),
+			musb_readl(musb->mregs, OTG_SYSSTATUS),
+			musb_readl(musb->mregs, OTG_INTERFSEL),
+			musb_readl(musb->mregs, OTG_SIMENABLE));
+
+	return 0;
+}
+
+static void omap2430_musb_enable(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
+
+	if (glue->status == MUSB_UNKNOWN)
+		glue->status = MUSB_VBUS_OFF;
+	omap_musb_set_mailbox(glue);
+}
+
+static void omap2430_musb_disable(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
+
+	if (glue->status != MUSB_UNKNOWN)
+		omap_control_usb_set_mode(glue->control_otghs,
+			USB_MODE_DISCONNECT);
+}
+
+static int omap2430_musb_exit(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
+
+	omap2430_low_level_exit(musb);
+	phy_power_off(musb->phy);
+	phy_exit(musb->phy);
+	musb->phy = NULL;
+	cancel_work_sync(&glue->omap_musb_mailbox_work);
+
+	return 0;
+}
+
+static const struct musb_platform_ops omap2430_ops = {
+	.quirks		= MUSB_DMA_INVENTRA,
+#ifdef CONFIG_USB_INVENTRA_DMA
+	.dma_init	= musbhs_dma_controller_create,
+	.dma_exit	= musbhs_dma_controller_destroy,
+#endif
+	.init		= omap2430_musb_init,
+	.exit		= omap2430_musb_exit,
+
+	.enable		= omap2430_musb_enable,
+	.disable	= omap2430_musb_disable,
+
+	.phy_callback	= omap2430_musb_mailbox,
+};
+
+static u64 omap2430_dmamask = DMA_BIT_MASK(32);
+
+static int omap2430_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
+	struct omap_musb_board_data	*data;
+	struct platform_device		*musb;
+	struct omap2430_glue		*glue;
+	struct device_node		*np = pdev->dev.of_node;
+	struct musb_hdrc_config		*config;
+	struct device_node		*control_node;
+	struct platform_device		*control_pdev;
+	int				ret = -ENOMEM, val;
+	bool				populate_irqs = false;
+
+	if (!np)
+		return -ENODEV;
+
+	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		goto err0;
+
+	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err0;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &omap2430_dmamask;
+	musb->dev.coherent_dma_mask	= omap2430_dmamask;
+
+	/*
+	 * Legacy SoCs using omap_device get confused if node is moved
+	 * because of interconnect properties mixed into the node.
+	 */
+	if (of_get_property(np, "ti,hwmods", NULL)) {
+		dev_warn(&pdev->dev, "please update to probe with ti-sysc\n");
+		populate_irqs = true;
+	} else {
+		device_set_of_node_from_dev(&musb->dev, &pdev->dev);
+	}
+	of_node_put(np);
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->status			= MUSB_UNKNOWN;
+	glue->control_otghs = ERR_PTR(-ENODEV);
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		goto err2;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		goto err2;
+
+	config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
+	if (!config)
+		goto err2;
+
+	of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
+	of_property_read_u32(np, "interface-type",
+			(u32 *)&data->interface_type);
+	of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
+	of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
+	of_property_read_u32(np, "power", (u32 *)&pdata->power);
+
+	ret = of_property_read_u32(np, "multipoint", &val);
+	if (!ret && val)
+		config->multipoint = true;
+
+	pdata->board_data	= data;
+	pdata->config		= config;
+
+	control_node = of_parse_phandle(np, "ctrl-module", 0);
+	if (control_node) {
+		control_pdev = of_find_device_by_node(control_node);
+		of_node_put(control_node);
+		if (!control_pdev) {
+			dev_err(&pdev->dev, "Failed to get control device\n");
+			ret = -EINVAL;
+			goto err2;
+		}
+		glue->control_otghs = &control_pdev->dev;
+	}
+
+	pdata->platform_ops		= &omap2430_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	/*
+	 * REVISIT if we ever have two instances of the wrapper, we will be
+	 * in big trouble
+	 */
+	_glue	= glue;
+
+	INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work);
+
+	ret = platform_device_add_resources(musb, pdev->resource, pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err2;
+	}
+
+	if (populate_irqs) {
+		struct resource musb_res[3];
+		struct resource *res;
+		int i = 0;
+
+		memset(musb_res, 0, sizeof(*musb_res) * ARRAY_SIZE(musb_res));
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (!res) {
+			ret = -EINVAL;
+			goto err2;
+		}
+
+		musb_res[i].start = res->start;
+		musb_res[i].end = res->end;
+		musb_res[i].flags = res->flags;
+		musb_res[i].name = res->name;
+		i++;
+
+		ret = of_irq_get_byname(np, "mc");
+		if (ret > 0) {
+			musb_res[i].start = ret;
+			musb_res[i].flags = IORESOURCE_IRQ;
+			musb_res[i].name = "mc";
+			i++;
+		}
+
+		ret = of_irq_get_byname(np, "dma");
+		if (ret > 0) {
+			musb_res[i].start = ret;
+			musb_res[i].flags = IORESOURCE_IRQ;
+			musb_res[i].name = "dma";
+			i++;
+		}
+
+		ret = platform_device_add_resources(musb, musb_res, i);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to add IRQ resources\n");
+			goto err2;
+		}
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err2;
+	}
+
+	pm_runtime_enable(glue->dev);
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err3;
+	}
+
+	return 0;
+
+err3:
+	pm_runtime_disable(glue->dev);
+
+err2:
+	platform_device_put(musb);
+
+err0:
+	return ret;
+}
+
+static int omap2430_remove(struct platform_device *pdev)
+{
+	struct omap2430_glue *glue = platform_get_drvdata(pdev);
+
+	platform_device_unregister(glue->musb);
+	pm_runtime_disable(glue->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int omap2430_runtime_suspend(struct device *dev)
+{
+	struct omap2430_glue		*glue = dev_get_drvdata(dev);
+	struct musb			*musb = glue_to_musb(glue);
+
+	if (!musb)
+		return 0;
+
+	musb->context.otg_interfsel = musb_readl(musb->mregs,
+						 OTG_INTERFSEL);
+
+	omap2430_low_level_exit(musb);
+
+	if (!glue->phy_suspended) {
+		phy_power_off(musb->phy);
+		phy_exit(musb->phy);
+	}
+
+	glue->is_runtime_suspended = 1;
+
+	return 0;
+}
+
+static int omap2430_runtime_resume(struct device *dev)
+{
+	struct omap2430_glue		*glue = dev_get_drvdata(dev);
+	struct musb			*musb = glue_to_musb(glue);
+
+	if (!musb)
+		return 0;
+
+	if (!glue->phy_suspended) {
+		phy_init(musb->phy);
+		phy_power_on(musb->phy);
+	}
+
+	omap2430_low_level_init(musb);
+	musb_writel(musb->mregs, OTG_INTERFSEL,
+		    musb->context.otg_interfsel);
+
+	/* Wait for musb to get oriented. Otherwise we can get babble */
+	usleep_range(200000, 250000);
+
+	glue->is_runtime_suspended = 0;
+
+	return 0;
+}
+
+/* I2C and SPI PHYs need to be suspended before the glue layer */
+static int omap2430_suspend(struct device *dev)
+{
+	struct omap2430_glue *glue = dev_get_drvdata(dev);
+	struct musb *musb = glue_to_musb(glue);
+
+	phy_power_off(musb->phy);
+	phy_exit(musb->phy);
+	glue->phy_suspended = 1;
+
+	return 0;
+}
+
+/* Glue layer needs to be suspended after musb_suspend() */
+static int omap2430_suspend_late(struct device *dev)
+{
+	struct omap2430_glue *glue = dev_get_drvdata(dev);
+
+	if (glue->is_runtime_suspended)
+		return 0;
+
+	glue->needs_resume = 1;
+
+	return omap2430_runtime_suspend(dev);
+}
+
+static int omap2430_resume_early(struct device *dev)
+{
+	struct omap2430_glue *glue = dev_get_drvdata(dev);
+
+	if (!glue->needs_resume)
+		return 0;
+
+	glue->needs_resume = 0;
+
+	return omap2430_runtime_resume(dev);
+}
+
+static int omap2430_resume(struct device *dev)
+{
+	struct omap2430_glue *glue = dev_get_drvdata(dev);
+	struct musb *musb = glue_to_musb(glue);
+
+	phy_init(musb->phy);
+	phy_power_on(musb->phy);
+	glue->phy_suspended = 0;
+
+	return 0;
+}
+
+static const struct dev_pm_ops omap2430_pm_ops = {
+	.runtime_suspend = omap2430_runtime_suspend,
+	.runtime_resume = omap2430_runtime_resume,
+	.suspend = omap2430_suspend,
+	.suspend_late = omap2430_suspend_late,
+	.resume_early = omap2430_resume_early,
+	.resume = omap2430_resume,
+};
+
+#define DEV_PM_OPS	(&omap2430_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id omap2430_id_table[] = {
+	{
+		.compatible = "ti,omap4-musb"
+	},
+	{
+		.compatible = "ti,omap3-musb"
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, omap2430_id_table);
+#endif
+
+static struct platform_driver omap2430_driver = {
+	.probe		= omap2430_probe,
+	.remove		= omap2430_remove,
+	.driver		= {
+		.name	= "musb-omap2430",
+		.pm	= DEV_PM_OPS,
+		.of_match_table = of_match_ptr(omap2430_id_table),
+	},
+};
+
+module_platform_driver(omap2430_driver);
+
+MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
new file mode 100644
index 000000000..939a0361a
--- /dev/null
+++ b/drivers/usb/musb/omap2430.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ */
+
+#ifndef __MUSB_OMAP243X_H__
+#define __MUSB_OMAP243X_H__
+
+#include <linux/platform_data/usb-omap.h>
+
+/*
+ * OMAP2430-specific definitions
+ */
+
+#define OTG_REVISION		0x400
+
+#define OTG_SYSCONFIG		0x404
+#	define	MIDLEMODE	12	/* bit position */
+#	define	FORCESTDBY		(0 << MIDLEMODE)
+#	define	NOSTDBY			(1 << MIDLEMODE)
+#	define	SMARTSTDBY		(2 << MIDLEMODE)
+
+#	define	SIDLEMODE		3	/* bit position */
+#	define	FORCEIDLE		(0 << SIDLEMODE)
+#	define	NOIDLE			(1 << SIDLEMODE)
+#	define	SMARTIDLE		(2 << SIDLEMODE)
+
+#	define	ENABLEWAKEUP		(1 << 2)
+#	define	SOFTRST			(1 << 1)
+#	define	AUTOIDLE		(1 << 0)
+
+#define OTG_SYSSTATUS		0x408
+#	define	RESETDONE		(1 << 0)
+
+#define OTG_INTERFSEL		0x40c
+#	define	EXTCP			(1 << 2)
+#	define	PHYSEL			0	/* bit position */
+#	define	UTMI_8BIT		(0 << PHYSEL)
+#	define	ULPI_12PIN		(1 << PHYSEL)
+#	define	ULPI_8PIN		(2 << PHYSEL)
+
+#define OTG_SIMENABLE		0x410
+#	define	TM1			(1 << 0)
+
+#define OTG_FORCESTDBY		0x414
+#	define	ENABLEFORCE		(1 << 0)
+
+#endif	/* __MUSB_OMAP243X_H__ */
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
new file mode 100644
index 000000000..7f9a999cd
--- /dev/null
+++ b/drivers/usb/musb/sunxi.c
@@ -0,0 +1,834 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Allwinner sun4i MUSB Glue Layer
+ *
+ * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/extcon.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy-sun4i-usb.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/soc/sunxi/sunxi_sram.h>
+#include <linux/usb/musb.h>
+#include <linux/usb/of.h>
+#include <linux/usb/usb_phy_generic.h>
+#include <linux/workqueue.h>
+#include "musb_core.h"
+
+/*
+ * Register offsets, note sunxi musb has a different layout then most
+ * musb implementations, we translate the layout in musb_readb & friends.
+ */
+#define SUNXI_MUSB_POWER			0x0040
+#define SUNXI_MUSB_DEVCTL			0x0041
+#define SUNXI_MUSB_INDEX			0x0042
+#define SUNXI_MUSB_VEND0			0x0043
+#define SUNXI_MUSB_INTRTX			0x0044
+#define SUNXI_MUSB_INTRRX			0x0046
+#define SUNXI_MUSB_INTRTXE			0x0048
+#define SUNXI_MUSB_INTRRXE			0x004a
+#define SUNXI_MUSB_INTRUSB			0x004c
+#define SUNXI_MUSB_INTRUSBE			0x0050
+#define SUNXI_MUSB_FRAME			0x0054
+#define SUNXI_MUSB_TXFIFOSZ			0x0090
+#define SUNXI_MUSB_TXFIFOADD			0x0092
+#define SUNXI_MUSB_RXFIFOSZ			0x0094
+#define SUNXI_MUSB_RXFIFOADD			0x0096
+#define SUNXI_MUSB_FADDR			0x0098
+#define SUNXI_MUSB_TXFUNCADDR			0x0098
+#define SUNXI_MUSB_TXHUBADDR			0x009a
+#define SUNXI_MUSB_TXHUBPORT			0x009b
+#define SUNXI_MUSB_RXFUNCADDR			0x009c
+#define SUNXI_MUSB_RXHUBADDR			0x009e
+#define SUNXI_MUSB_RXHUBPORT			0x009f
+#define SUNXI_MUSB_CONFIGDATA			0x00c0
+
+/* VEND0 bits */
+#define SUNXI_MUSB_VEND0_PIO_MODE		0
+
+/* flags */
+#define SUNXI_MUSB_FL_ENABLED			0
+#define SUNXI_MUSB_FL_HOSTMODE			1
+#define SUNXI_MUSB_FL_HOSTMODE_PEND		2
+#define SUNXI_MUSB_FL_VBUS_ON			3
+#define SUNXI_MUSB_FL_PHY_ON			4
+#define SUNXI_MUSB_FL_HAS_SRAM			5
+#define SUNXI_MUSB_FL_HAS_RESET			6
+#define SUNXI_MUSB_FL_NO_CONFIGDATA		7
+#define SUNXI_MUSB_FL_PHY_MODE_PEND		8
+
+/* Our read/write methods need access and do not get passed in a musb ref :| */
+static struct musb *sunxi_musb;
+
+struct sunxi_glue {
+	struct device		*dev;
+	struct musb		*musb;
+	struct platform_device	*musb_pdev;
+	struct clk		*clk;
+	struct reset_control	*rst;
+	struct phy		*phy;
+	struct platform_device	*usb_phy;
+	struct usb_phy		*xceiv;
+	enum phy_mode		phy_mode;
+	unsigned long		flags;
+	struct work_struct	work;
+	struct extcon_dev	*extcon;
+	struct notifier_block	host_nb;
+};
+
+/* phy_power_on / off may sleep, so we use a workqueue  */
+static void sunxi_musb_work(struct work_struct *work)
+{
+	struct sunxi_glue *glue = container_of(work, struct sunxi_glue, work);
+	bool vbus_on, phy_on;
+
+	if (!test_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags))
+		return;
+
+	if (test_and_clear_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags)) {
+		struct musb *musb = glue->musb;
+		unsigned long flags;
+		u8 devctl;
+
+		spin_lock_irqsave(&musb->lock, flags);
+
+		devctl = readb(musb->mregs + SUNXI_MUSB_DEVCTL);
+		if (test_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags)) {
+			set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+			MUSB_HST_MODE(musb);
+			devctl |= MUSB_DEVCTL_SESSION;
+		} else {
+			clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
+			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+			MUSB_DEV_MODE(musb);
+			devctl &= ~MUSB_DEVCTL_SESSION;
+		}
+		writeb(devctl, musb->mregs + SUNXI_MUSB_DEVCTL);
+
+		spin_unlock_irqrestore(&musb->lock, flags);
+	}
+
+	vbus_on = test_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
+	phy_on = test_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
+
+	if (phy_on != vbus_on) {
+		if (vbus_on) {
+			phy_power_on(glue->phy);
+			set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
+		} else {
+			phy_power_off(glue->phy);
+			clear_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
+		}
+	}
+
+	if (test_and_clear_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags))
+		phy_set_mode(glue->phy, glue->phy_mode);
+}
+
+static void sunxi_musb_set_vbus(struct musb *musb, int is_on)
+{
+	struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+
+	if (is_on) {
+		set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
+		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+	} else {
+		clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
+	}
+
+	schedule_work(&glue->work);
+}
+
+static void sunxi_musb_pre_root_reset_end(struct musb *musb)
+{
+	struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+
+	sun4i_usb_phy_set_squelch_detect(glue->phy, false);
+}
+
+static void sunxi_musb_post_root_reset_end(struct musb *musb)
+{
+	struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+
+	sun4i_usb_phy_set_squelch_detect(glue->phy, true);
+}
+
+static irqreturn_t sunxi_musb_interrupt(int irq, void *__hci)
+{
+	struct musb *musb = __hci;
+	unsigned long flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	musb->int_usb = readb(musb->mregs + SUNXI_MUSB_INTRUSB);
+	if (musb->int_usb)
+		writeb(musb->int_usb, musb->mregs + SUNXI_MUSB_INTRUSB);
+
+	if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) {
+		/* ep0 FADDR must be 0 when (re)entering peripheral mode */
+		musb_ep_select(musb->mregs, 0);
+		musb_writeb(musb->mregs, MUSB_FADDR, 0);
+	}
+
+	musb->int_tx = readw(musb->mregs + SUNXI_MUSB_INTRTX);
+	if (musb->int_tx)
+		writew(musb->int_tx, musb->mregs + SUNXI_MUSB_INTRTX);
+
+	musb->int_rx = readw(musb->mregs + SUNXI_MUSB_INTRRX);
+	if (musb->int_rx)
+		writew(musb->int_rx, musb->mregs + SUNXI_MUSB_INTRRX);
+
+	musb_interrupt(musb);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static int sunxi_musb_host_notifier(struct notifier_block *nb,
+				    unsigned long event, void *ptr)
+{
+	struct sunxi_glue *glue = container_of(nb, struct sunxi_glue, host_nb);
+
+	if (event)
+		set_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags);
+	else
+		clear_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags);
+
+	set_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags);
+	schedule_work(&glue->work);
+
+	return NOTIFY_DONE;
+}
+
+static int sunxi_musb_init(struct musb *musb)
+{
+	struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+	int ret;
+
+	sunxi_musb = musb;
+	musb->phy = glue->phy;
+	musb->xceiv = glue->xceiv;
+
+	if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) {
+		ret = sunxi_sram_claim(musb->controller->parent);
+		if (ret)
+			return ret;
+	}
+
+	ret = clk_prepare_enable(glue->clk);
+	if (ret)
+		goto error_sram_release;
+
+	if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) {
+		ret = reset_control_deassert(glue->rst);
+		if (ret)
+			goto error_clk_disable;
+	}
+
+	writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0);
+
+	/* Register notifier before calling phy_init() */
+	ret = devm_extcon_register_notifier(glue->dev, glue->extcon,
+					EXTCON_USB_HOST, &glue->host_nb);
+	if (ret)
+		goto error_reset_assert;
+
+	ret = phy_init(glue->phy);
+	if (ret)
+		goto error_reset_assert;
+
+	musb->isr = sunxi_musb_interrupt;
+
+	/* Stop the musb-core from doing runtime pm (not supported on sunxi) */
+	pm_runtime_get(musb->controller);
+
+	return 0;
+
+error_reset_assert:
+	if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags))
+		reset_control_assert(glue->rst);
+error_clk_disable:
+	clk_disable_unprepare(glue->clk);
+error_sram_release:
+	if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags))
+		sunxi_sram_release(musb->controller->parent);
+	return ret;
+}
+
+static int sunxi_musb_exit(struct musb *musb)
+{
+	struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+
+	pm_runtime_put(musb->controller);
+
+	cancel_work_sync(&glue->work);
+	if (test_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags))
+		phy_power_off(glue->phy);
+
+	phy_exit(glue->phy);
+
+	if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags))
+		reset_control_assert(glue->rst);
+
+	clk_disable_unprepare(glue->clk);
+	if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags))
+		sunxi_sram_release(musb->controller->parent);
+
+	devm_usb_put_phy(glue->dev, glue->xceiv);
+
+	return 0;
+}
+
+static void sunxi_musb_enable(struct musb *musb)
+{
+	struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+
+	glue->musb = musb;
+
+	/* musb_core does not call us in a balanced manner */
+	if (test_and_set_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags))
+		return;
+
+	schedule_work(&glue->work);
+}
+
+static void sunxi_musb_disable(struct musb *musb)
+{
+	struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+
+	clear_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags);
+}
+
+static struct dma_controller *
+sunxi_musb_dma_controller_create(struct musb *musb, void __iomem *base)
+{
+	return NULL;
+}
+
+static void sunxi_musb_dma_controller_destroy(struct dma_controller *c)
+{
+}
+
+static int sunxi_musb_set_mode(struct musb *musb, u8 mode)
+{
+	struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+	enum phy_mode new_mode;
+
+	switch (mode) {
+	case MUSB_HOST:
+		new_mode = PHY_MODE_USB_HOST;
+		break;
+	case MUSB_PERIPHERAL:
+		new_mode = PHY_MODE_USB_DEVICE;
+		break;
+	case MUSB_OTG:
+		new_mode = PHY_MODE_USB_OTG;
+		break;
+	default:
+		dev_err(musb->controller->parent,
+			"Error requested mode not supported by this kernel\n");
+		return -EINVAL;
+	}
+
+	if (glue->phy_mode == new_mode)
+		return 0;
+
+	if (musb->port_mode != MUSB_OTG) {
+		dev_err(musb->controller->parent,
+			"Error changing modes is only supported in dual role mode\n");
+		return -EINVAL;
+	}
+
+	if (musb->port1_status & USB_PORT_STAT_ENABLE)
+		musb_root_disconnect(musb);
+
+	/*
+	 * phy_set_mode may sleep, and we're called with a spinlock held,
+	 * so let sunxi_musb_work deal with it.
+	 */
+	glue->phy_mode = new_mode;
+	set_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags);
+	schedule_work(&glue->work);
+
+	return 0;
+}
+
+static int sunxi_musb_recover(struct musb *musb)
+{
+	struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+
+	/*
+	 * Schedule a phy_set_mode with the current glue->phy_mode value,
+	 * this will force end the current session.
+	 */
+	set_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags);
+	schedule_work(&glue->work);
+
+	return 0;
+}
+
+/*
+ * sunxi musb register layout
+ * 0x00 - 0x17	fifo regs, 1 long per fifo
+ * 0x40 - 0x57	generic control regs (power - frame)
+ * 0x80 - 0x8f	ep control regs (addressed through hw_ep->regs, indexed)
+ * 0x90 - 0x97	fifo control regs (indexed)
+ * 0x98 - 0x9f	multipoint / busctl regs (indexed)
+ * 0xc0		configdata reg
+ */
+
+static u32 sunxi_musb_fifo_offset(u8 epnum)
+{
+	return (epnum * 4);
+}
+
+static u32 sunxi_musb_ep_offset(u8 epnum, u16 offset)
+{
+	WARN_ONCE(offset != 0,
+		  "sunxi_musb_ep_offset called with non 0 offset\n");
+
+	return 0x80; /* indexed, so ignore epnum */
+}
+
+static u32 sunxi_musb_busctl_offset(u8 epnum, u16 offset)
+{
+	return SUNXI_MUSB_TXFUNCADDR + offset;
+}
+
+static u8 sunxi_musb_readb(void __iomem *addr, u32 offset)
+{
+	struct sunxi_glue *glue;
+
+	if (addr == sunxi_musb->mregs) {
+		/* generic control or fifo control reg access */
+		switch (offset) {
+		case MUSB_FADDR:
+			return readb(addr + SUNXI_MUSB_FADDR);
+		case MUSB_POWER:
+			return readb(addr + SUNXI_MUSB_POWER);
+		case MUSB_INTRUSB:
+			return readb(addr + SUNXI_MUSB_INTRUSB);
+		case MUSB_INTRUSBE:
+			return readb(addr + SUNXI_MUSB_INTRUSBE);
+		case MUSB_INDEX:
+			return readb(addr + SUNXI_MUSB_INDEX);
+		case MUSB_TESTMODE:
+			return 0; /* No testmode on sunxi */
+		case MUSB_DEVCTL:
+			return readb(addr + SUNXI_MUSB_DEVCTL);
+		case MUSB_TXFIFOSZ:
+			return readb(addr + SUNXI_MUSB_TXFIFOSZ);
+		case MUSB_RXFIFOSZ:
+			return readb(addr + SUNXI_MUSB_RXFIFOSZ);
+		case MUSB_CONFIGDATA + 0x10: /* See musb_read_configdata() */
+			glue = dev_get_drvdata(sunxi_musb->controller->parent);
+			/* A33 saves a reg, and we get to hardcode this */
+			if (test_bit(SUNXI_MUSB_FL_NO_CONFIGDATA,
+				     &glue->flags))
+				return 0xde;
+
+			return readb(addr + SUNXI_MUSB_CONFIGDATA);
+		case MUSB_ULPI_BUSCONTROL:
+			dev_warn(sunxi_musb->controller->parent,
+				"sunxi-musb does not have ULPI bus control register\n");
+			return 0;
+		/* Offset for these is fixed by sunxi_musb_busctl_offset() */
+		case SUNXI_MUSB_TXFUNCADDR:
+		case SUNXI_MUSB_TXHUBADDR:
+		case SUNXI_MUSB_TXHUBPORT:
+		case SUNXI_MUSB_RXFUNCADDR:
+		case SUNXI_MUSB_RXHUBADDR:
+		case SUNXI_MUSB_RXHUBPORT:
+			/* multipoint / busctl reg access */
+			return readb(addr + offset);
+		default:
+			dev_err(sunxi_musb->controller->parent,
+				"Error unknown readb offset %u\n", offset);
+			return 0;
+		}
+	} else if (addr == (sunxi_musb->mregs + 0x80)) {
+		/* ep control reg access */
+		/* sunxi has a 2 byte hole before the txtype register */
+		if (offset >= MUSB_TXTYPE)
+			offset += 2;
+		return readb(addr + offset);
+	}
+
+	dev_err(sunxi_musb->controller->parent,
+		"Error unknown readb at 0x%x bytes offset\n",
+		(int)(addr - sunxi_musb->mregs));
+	return 0;
+}
+
+static void sunxi_musb_writeb(void __iomem *addr, unsigned offset, u8 data)
+{
+	if (addr == sunxi_musb->mregs) {
+		/* generic control or fifo control reg access */
+		switch (offset) {
+		case MUSB_FADDR:
+			return writeb(data, addr + SUNXI_MUSB_FADDR);
+		case MUSB_POWER:
+			return writeb(data, addr + SUNXI_MUSB_POWER);
+		case MUSB_INTRUSB:
+			return writeb(data, addr + SUNXI_MUSB_INTRUSB);
+		case MUSB_INTRUSBE:
+			return writeb(data, addr + SUNXI_MUSB_INTRUSBE);
+		case MUSB_INDEX:
+			return writeb(data, addr + SUNXI_MUSB_INDEX);
+		case MUSB_TESTMODE:
+			if (data)
+				dev_warn(sunxi_musb->controller->parent,
+					"sunxi-musb does not have testmode\n");
+			return;
+		case MUSB_DEVCTL:
+			return writeb(data, addr + SUNXI_MUSB_DEVCTL);
+		case MUSB_TXFIFOSZ:
+			return writeb(data, addr + SUNXI_MUSB_TXFIFOSZ);
+		case MUSB_RXFIFOSZ:
+			return writeb(data, addr + SUNXI_MUSB_RXFIFOSZ);
+		case MUSB_ULPI_BUSCONTROL:
+			dev_warn(sunxi_musb->controller->parent,
+				"sunxi-musb does not have ULPI bus control register\n");
+			return;
+		/* Offset for these is fixed by sunxi_musb_busctl_offset() */
+		case SUNXI_MUSB_TXFUNCADDR:
+		case SUNXI_MUSB_TXHUBADDR:
+		case SUNXI_MUSB_TXHUBPORT:
+		case SUNXI_MUSB_RXFUNCADDR:
+		case SUNXI_MUSB_RXHUBADDR:
+		case SUNXI_MUSB_RXHUBPORT:
+			/* multipoint / busctl reg access */
+			return writeb(data, addr + offset);
+		default:
+			dev_err(sunxi_musb->controller->parent,
+				"Error unknown writeb offset %u\n", offset);
+			return;
+		}
+	} else if (addr == (sunxi_musb->mregs + 0x80)) {
+		/* ep control reg access */
+		if (offset >= MUSB_TXTYPE)
+			offset += 2;
+		return writeb(data, addr + offset);
+	}
+
+	dev_err(sunxi_musb->controller->parent,
+		"Error unknown writeb at 0x%x bytes offset\n",
+		(int)(addr - sunxi_musb->mregs));
+}
+
+static u16 sunxi_musb_readw(void __iomem *addr, u32 offset)
+{
+	if (addr == sunxi_musb->mregs) {
+		/* generic control or fifo control reg access */
+		switch (offset) {
+		case MUSB_INTRTX:
+			return readw(addr + SUNXI_MUSB_INTRTX);
+		case MUSB_INTRRX:
+			return readw(addr + SUNXI_MUSB_INTRRX);
+		case MUSB_INTRTXE:
+			return readw(addr + SUNXI_MUSB_INTRTXE);
+		case MUSB_INTRRXE:
+			return readw(addr + SUNXI_MUSB_INTRRXE);
+		case MUSB_FRAME:
+			return readw(addr + SUNXI_MUSB_FRAME);
+		case MUSB_TXFIFOADD:
+			return readw(addr + SUNXI_MUSB_TXFIFOADD);
+		case MUSB_RXFIFOADD:
+			return readw(addr + SUNXI_MUSB_RXFIFOADD);
+		case MUSB_HWVERS:
+			return 0; /* sunxi musb version is not known */
+		default:
+			dev_err(sunxi_musb->controller->parent,
+				"Error unknown readw offset %u\n", offset);
+			return 0;
+		}
+	} else if (addr == (sunxi_musb->mregs + 0x80)) {
+		/* ep control reg access */
+		return readw(addr + offset);
+	}
+
+	dev_err(sunxi_musb->controller->parent,
+		"Error unknown readw at 0x%x bytes offset\n",
+		(int)(addr - sunxi_musb->mregs));
+	return 0;
+}
+
+static void sunxi_musb_writew(void __iomem *addr, unsigned offset, u16 data)
+{
+	if (addr == sunxi_musb->mregs) {
+		/* generic control or fifo control reg access */
+		switch (offset) {
+		case MUSB_INTRTX:
+			return writew(data, addr + SUNXI_MUSB_INTRTX);
+		case MUSB_INTRRX:
+			return writew(data, addr + SUNXI_MUSB_INTRRX);
+		case MUSB_INTRTXE:
+			return writew(data, addr + SUNXI_MUSB_INTRTXE);
+		case MUSB_INTRRXE:
+			return writew(data, addr + SUNXI_MUSB_INTRRXE);
+		case MUSB_FRAME:
+			return writew(data, addr + SUNXI_MUSB_FRAME);
+		case MUSB_TXFIFOADD:
+			return writew(data, addr + SUNXI_MUSB_TXFIFOADD);
+		case MUSB_RXFIFOADD:
+			return writew(data, addr + SUNXI_MUSB_RXFIFOADD);
+		default:
+			dev_err(sunxi_musb->controller->parent,
+				"Error unknown writew offset %u\n", offset);
+			return;
+		}
+	} else if (addr == (sunxi_musb->mregs + 0x80)) {
+		/* ep control reg access */
+		return writew(data, addr + offset);
+	}
+
+	dev_err(sunxi_musb->controller->parent,
+		"Error unknown writew at 0x%x bytes offset\n",
+		(int)(addr - sunxi_musb->mregs));
+}
+
+static const struct musb_platform_ops sunxi_musb_ops = {
+	.quirks		= MUSB_INDEXED_EP,
+	.init		= sunxi_musb_init,
+	.exit		= sunxi_musb_exit,
+	.enable		= sunxi_musb_enable,
+	.disable	= sunxi_musb_disable,
+	.fifo_offset	= sunxi_musb_fifo_offset,
+	.ep_offset	= sunxi_musb_ep_offset,
+	.busctl_offset	= sunxi_musb_busctl_offset,
+	.readb		= sunxi_musb_readb,
+	.writeb		= sunxi_musb_writeb,
+	.readw		= sunxi_musb_readw,
+	.writew		= sunxi_musb_writew,
+	.dma_init	= sunxi_musb_dma_controller_create,
+	.dma_exit	= sunxi_musb_dma_controller_destroy,
+	.set_mode	= sunxi_musb_set_mode,
+	.recover	= sunxi_musb_recover,
+	.set_vbus	= sunxi_musb_set_vbus,
+	.pre_root_reset_end = sunxi_musb_pre_root_reset_end,
+	.post_root_reset_end = sunxi_musb_post_root_reset_end,
+};
+
+/* Allwinner OTG supports up to 5 endpoints */
+#define SUNXI_MUSB_MAX_EP_NUM	6
+#define SUNXI_MUSB_RAM_BITS	11
+
+static struct musb_fifo_cfg sunxi_musb_mode_cfg[] = {
+	MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512),
+	MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512),
+	MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512),
+	MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512),
+	MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512),
+	MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512),
+	MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512),
+	MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512),
+	MUSB_EP_FIFO_SINGLE(5, FIFO_TX, 512),
+	MUSB_EP_FIFO_SINGLE(5, FIFO_RX, 512),
+};
+
+/* H3/V3s OTG supports only 4 endpoints */
+#define SUNXI_MUSB_MAX_EP_NUM_H3	5
+
+static struct musb_fifo_cfg sunxi_musb_mode_cfg_h3[] = {
+	MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512),
+	MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512),
+	MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512),
+	MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512),
+	MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512),
+	MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512),
+	MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512),
+	MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512),
+};
+
+static const struct musb_hdrc_config sunxi_musb_hdrc_config = {
+	.fifo_cfg       = sunxi_musb_mode_cfg,
+	.fifo_cfg_size  = ARRAY_SIZE(sunxi_musb_mode_cfg),
+	.multipoint	= true,
+	.dyn_fifo	= true,
+	.num_eps	= SUNXI_MUSB_MAX_EP_NUM,
+	.ram_bits	= SUNXI_MUSB_RAM_BITS,
+};
+
+static struct musb_hdrc_config sunxi_musb_hdrc_config_h3 = {
+	.fifo_cfg       = sunxi_musb_mode_cfg_h3,
+	.fifo_cfg_size  = ARRAY_SIZE(sunxi_musb_mode_cfg_h3),
+	.multipoint	= true,
+	.dyn_fifo	= true,
+	.num_eps	= SUNXI_MUSB_MAX_EP_NUM_H3,
+	.ram_bits	= SUNXI_MUSB_RAM_BITS,
+};
+
+
+static int sunxi_musb_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	pdata;
+	struct platform_device_info	pinfo;
+	struct sunxi_glue		*glue;
+	struct device_node		*np = pdev->dev.of_node;
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "Error no device tree node found\n");
+		return -EINVAL;
+	}
+
+	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		return -ENOMEM;
+
+	memset(&pdata, 0, sizeof(pdata));
+	switch (usb_get_dr_mode(&pdev->dev)) {
+#if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST
+	case USB_DR_MODE_HOST:
+		pdata.mode = MUSB_HOST;
+		glue->phy_mode = PHY_MODE_USB_HOST;
+		break;
+#endif
+#if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_GADGET
+	case USB_DR_MODE_PERIPHERAL:
+		pdata.mode = MUSB_PERIPHERAL;
+		glue->phy_mode = PHY_MODE_USB_DEVICE;
+		break;
+#endif
+#ifdef CONFIG_USB_MUSB_DUAL_ROLE
+	case USB_DR_MODE_OTG:
+		pdata.mode = MUSB_OTG;
+		glue->phy_mode = PHY_MODE_USB_OTG;
+		break;
+#endif
+	default:
+		dev_err(&pdev->dev, "Invalid or missing 'dr_mode' property\n");
+		return -EINVAL;
+	}
+	pdata.platform_ops	= &sunxi_musb_ops;
+	if (!of_device_is_compatible(np, "allwinner,sun8i-h3-musb"))
+		pdata.config = &sunxi_musb_hdrc_config;
+	else
+		pdata.config = &sunxi_musb_hdrc_config_h3;
+
+	glue->dev = &pdev->dev;
+	INIT_WORK(&glue->work, sunxi_musb_work);
+	glue->host_nb.notifier_call = sunxi_musb_host_notifier;
+
+	if (of_device_is_compatible(np, "allwinner,sun4i-a10-musb"))
+		set_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags);
+
+	if (of_device_is_compatible(np, "allwinner,sun6i-a31-musb"))
+		set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags);
+
+	if (of_device_is_compatible(np, "allwinner,sun8i-a33-musb") ||
+	    of_device_is_compatible(np, "allwinner,sun8i-h3-musb")) {
+		set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags);
+		set_bit(SUNXI_MUSB_FL_NO_CONFIGDATA, &glue->flags);
+	}
+
+	glue->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(glue->clk)) {
+		dev_err(&pdev->dev, "Error getting clock: %ld\n",
+			PTR_ERR(glue->clk));
+		return PTR_ERR(glue->clk);
+	}
+
+	if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) {
+		glue->rst = devm_reset_control_get(&pdev->dev, NULL);
+		if (IS_ERR(glue->rst))
+			return dev_err_probe(&pdev->dev, PTR_ERR(glue->rst),
+					     "Error getting reset\n");
+	}
+
+	glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0);
+	if (IS_ERR(glue->extcon))
+		return dev_err_probe(&pdev->dev, PTR_ERR(glue->extcon),
+				     "Invalid or missing extcon\n");
+
+	glue->phy = devm_phy_get(&pdev->dev, "usb");
+	if (IS_ERR(glue->phy))
+		return dev_err_probe(&pdev->dev, PTR_ERR(glue->phy),
+				     "Error getting phy\n");
+
+	glue->usb_phy = usb_phy_generic_register();
+	if (IS_ERR(glue->usb_phy)) {
+		dev_err(&pdev->dev, "Error registering usb-phy %ld\n",
+			PTR_ERR(glue->usb_phy));
+		return PTR_ERR(glue->usb_phy);
+	}
+
+	glue->xceiv = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
+	if (IS_ERR(glue->xceiv)) {
+		ret = PTR_ERR(glue->xceiv);
+		dev_err(&pdev->dev, "Error getting usb-phy %d\n", ret);
+		goto err_unregister_usb_phy;
+	}
+
+	platform_set_drvdata(pdev, glue);
+
+	memset(&pinfo, 0, sizeof(pinfo));
+	pinfo.name	 = "musb-hdrc";
+	pinfo.id	= PLATFORM_DEVID_AUTO;
+	pinfo.parent	= &pdev->dev;
+	pinfo.fwnode	= of_fwnode_handle(pdev->dev.of_node);
+	pinfo.of_node_reused = true;
+	pinfo.res	= pdev->resource;
+	pinfo.num_res	= pdev->num_resources;
+	pinfo.data	= &pdata;
+	pinfo.size_data = sizeof(pdata);
+
+	glue->musb_pdev = platform_device_register_full(&pinfo);
+	if (IS_ERR(glue->musb_pdev)) {
+		ret = PTR_ERR(glue->musb_pdev);
+		dev_err(&pdev->dev, "Error registering musb dev: %d\n", ret);
+		goto err_unregister_usb_phy;
+	}
+
+	return 0;
+
+err_unregister_usb_phy:
+	usb_phy_generic_unregister(glue->usb_phy);
+	return ret;
+}
+
+static int sunxi_musb_remove(struct platform_device *pdev)
+{
+	struct sunxi_glue *glue = platform_get_drvdata(pdev);
+	struct platform_device *usb_phy = glue->usb_phy;
+
+	platform_device_unregister(glue->musb_pdev);
+	usb_phy_generic_unregister(usb_phy);
+
+	return 0;
+}
+
+static const struct of_device_id sunxi_musb_match[] = {
+	{ .compatible = "allwinner,sun4i-a10-musb", },
+	{ .compatible = "allwinner,sun6i-a31-musb", },
+	{ .compatible = "allwinner,sun8i-a33-musb", },
+	{ .compatible = "allwinner,sun8i-h3-musb", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sunxi_musb_match);
+
+static struct platform_driver sunxi_musb_driver = {
+	.probe = sunxi_musb_probe,
+	.remove = sunxi_musb_remove,
+	.driver = {
+		.name = "musb-sunxi",
+		.of_match_table = sunxi_musb_match,
+	},
+};
+module_platform_driver(sunxi_musb_driver);
+
+MODULE_DESCRIPTION("Allwinner sunxi MUSB Glue Layer");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
new file mode 100644
index 000000000..5609b4e84
--- /dev/null
+++ b/drivers/usb/musb/tusb6010.c
@@ -0,0 +1,1282 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TUSB6010 USB 2.0 OTG Dual Role controller
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * Notes:
+ * - Driver assumes that interface to external host (main CPU) is
+ *   configured for NOR FLASH interface instead of VLYNQ serial
+ *   interface.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/prefetch.h>
+#include <linux/usb.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/usb_phy_generic.h>
+
+#include "musb_core.h"
+
+struct tusb6010_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct platform_device	*phy;
+};
+
+static void tusb_musb_set_vbus(struct musb *musb, int is_on);
+
+#define TUSB_REV_MAJOR(reg_val)		((reg_val >> 4) & 0xf)
+#define TUSB_REV_MINOR(reg_val)		(reg_val & 0xf)
+
+/*
+ * Checks the revision. We need to use the DMA register as 3.0 does not
+ * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
+ */
+static u8 tusb_get_revision(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		die_id;
+	u8		rev;
+
+	rev = musb_readl(tbase, TUSB_DMA_CTRL_REV) & 0xff;
+	if (TUSB_REV_MAJOR(rev) == 3) {
+		die_id = TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase,
+				TUSB_DIDR1_HI));
+		if (die_id >= TUSB_DIDR1_HI_REV_31)
+			rev |= 1;
+	}
+
+	return rev;
+}
+
+static void tusb_print_revision(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u8		rev;
+
+	rev = musb->tusb_revision;
+
+	pr_info("tusb: %s%i.%i %s%i.%i %s%i.%i %s%i.%i %s%i %s%i.%i\n",
+		"prcm",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_PRCM_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_PRCM_REV)),
+		"int",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_INT_CTRL_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_INT_CTRL_REV)),
+		"gpio",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_GPIO_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_GPIO_REV)),
+		"dma",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_DMA_CTRL_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_DMA_CTRL_REV)),
+		"dieid",
+		TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase, TUSB_DIDR1_HI)),
+		"rev",
+		TUSB_REV_MAJOR(rev), TUSB_REV_MINOR(rev));
+}
+
+#define WBUS_QUIRK_MASK	(TUSB_PHY_OTG_CTRL_TESTM2 | TUSB_PHY_OTG_CTRL_TESTM1 \
+				| TUSB_PHY_OTG_CTRL_TESTM0)
+
+/*
+ * Workaround for spontaneous WBUS wake-up issue #2 for tusb3.0.
+ * Disables power detection in PHY for the duration of idle.
+ */
+static void tusb_wbus_quirk(struct musb *musb, int enabled)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	static u32	phy_otg_ctrl, phy_otg_ena;
+	u32		tmp;
+
+	if (enabled) {
+		phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+		phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+		tmp = TUSB_PHY_OTG_CTRL_WRPROTECT
+				| phy_otg_ena | WBUS_QUIRK_MASK;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL, tmp);
+		tmp = phy_otg_ena & ~WBUS_QUIRK_MASK;
+		tmp |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_TESTM2;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, tmp);
+		dev_dbg(musb->controller, "Enabled tusb wbus quirk ctrl %08x ena %08x\n",
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL),
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE));
+	} else if (musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE)
+					& TUSB_PHY_OTG_CTRL_TESTM2) {
+		tmp = TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ctrl;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL, tmp);
+		tmp = TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ena;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, tmp);
+		dev_dbg(musb->controller, "Disabled tusb wbus quirk ctrl %08x ena %08x\n",
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL),
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE));
+		phy_otg_ctrl = 0;
+		phy_otg_ena = 0;
+	}
+}
+
+static u32 tusb_fifo_offset(u8 epnum)
+{
+	return 0x200 + (epnum * 0x20);
+}
+
+static u32 tusb_ep_offset(u8 epnum, u16 offset)
+{
+	return 0x10 + offset;
+}
+
+/* TUSB mapping: "flat" plus ep0 special cases */
+static void tusb_ep_select(void __iomem *mbase, u8 epnum)
+{
+	musb_writeb(mbase, MUSB_INDEX, epnum);
+}
+
+/*
+ * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
+ */
+static u8 tusb_readb(void __iomem *addr, u32 offset)
+{
+	u16 tmp;
+	u8 val;
+
+	tmp = __raw_readw(addr + (offset & ~1));
+	if (offset & 1)
+		val = (tmp >> 8);
+	else
+		val = tmp & 0xff;
+
+	return val;
+}
+
+static void tusb_writeb(void __iomem *addr, u32 offset, u8 data)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(addr + (offset & ~1));
+	if (offset & 1)
+		tmp = (data << 8) | (tmp & 0xff);
+	else
+		tmp = (tmp & 0xff00) | data;
+
+	__raw_writew(tmp, addr + (offset & ~1));
+}
+
+/*
+ * TUSB 6010 may use a parallel bus that doesn't support byte ops;
+ * so both loading and unloading FIFOs need explicit byte counts.
+ */
+
+static inline void
+tusb_fifo_write_unaligned(void __iomem *fifo, const u8 *buf, u16 len)
+{
+	u32		val;
+	int		i;
+
+	if (len > 4) {
+		for (i = 0; i < (len >> 2); i++) {
+			memcpy(&val, buf, 4);
+			musb_writel(fifo, 0, val);
+			buf += 4;
+		}
+		len %= 4;
+	}
+	if (len > 0) {
+		/* Write the rest 1 - 3 bytes to FIFO */
+		val = 0;
+		memcpy(&val, buf, len);
+		musb_writel(fifo, 0, val);
+	}
+}
+
+static inline void tusb_fifo_read_unaligned(void __iomem *fifo,
+						void *buf, u16 len)
+{
+	u32		val;
+	int		i;
+
+	if (len > 4) {
+		for (i = 0; i < (len >> 2); i++) {
+			val = musb_readl(fifo, 0);
+			memcpy(buf, &val, 4);
+			buf += 4;
+		}
+		len %= 4;
+	}
+	if (len > 0) {
+		/* Read the rest 1 - 3 bytes from FIFO */
+		val = musb_readl(fifo, 0);
+		memcpy(buf, &val, len);
+	}
+}
+
+static void tusb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf)
+{
+	struct musb *musb = hw_ep->musb;
+	void __iomem	*ep_conf = hw_ep->conf;
+	void __iomem	*fifo = hw_ep->fifo;
+	u8		epnum = hw_ep->epnum;
+
+	prefetch(buf);
+
+	dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
+			'T', epnum, fifo, len, buf);
+
+	if (epnum)
+		musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(len));
+	else
+		musb_writel(ep_conf, 0, TUSB_EP0_CONFIG_DIR_TX |
+			TUSB_EP0_CONFIG_XFR_SIZE(len));
+
+	if (likely((0x01 & (unsigned long) buf) == 0)) {
+
+		/* Best case is 32bit-aligned destination address */
+		if ((0x02 & (unsigned long) buf) == 0) {
+			if (len >= 4) {
+				iowrite32_rep(fifo, buf, len >> 2);
+				buf += (len & ~0x03);
+				len &= 0x03;
+			}
+		} else {
+			if (len >= 2) {
+				u32 val;
+				int i;
+
+				/* Cannot use writesw, fifo is 32-bit */
+				for (i = 0; i < (len >> 2); i++) {
+					val = (u32)(*(u16 *)buf);
+					buf += 2;
+					val |= (*(u16 *)buf) << 16;
+					buf += 2;
+					musb_writel(fifo, 0, val);
+				}
+				len &= 0x03;
+			}
+		}
+	}
+
+	if (len > 0)
+		tusb_fifo_write_unaligned(fifo, buf, len);
+}
+
+static void tusb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
+{
+	struct musb *musb = hw_ep->musb;
+	void __iomem	*ep_conf = hw_ep->conf;
+	void __iomem	*fifo = hw_ep->fifo;
+	u8		epnum = hw_ep->epnum;
+
+	dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
+			'R', epnum, fifo, len, buf);
+
+	if (epnum)
+		musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(len));
+	else
+		musb_writel(ep_conf, 0, TUSB_EP0_CONFIG_XFR_SIZE(len));
+
+	if (likely((0x01 & (unsigned long) buf) == 0)) {
+
+		/* Best case is 32bit-aligned destination address */
+		if ((0x02 & (unsigned long) buf) == 0) {
+			if (len >= 4) {
+				ioread32_rep(fifo, buf, len >> 2);
+				buf += (len & ~0x03);
+				len &= 0x03;
+			}
+		} else {
+			if (len >= 2) {
+				u32 val;
+				int i;
+
+				/* Cannot use readsw, fifo is 32-bit */
+				for (i = 0; i < (len >> 2); i++) {
+					val = musb_readl(fifo, 0);
+					*(u16 *)buf = (u16)(val & 0xffff);
+					buf += 2;
+					*(u16 *)buf = (u16)(val >> 16);
+					buf += 2;
+				}
+				len &= 0x03;
+			}
+		}
+	}
+
+	if (len > 0)
+		tusb_fifo_read_unaligned(fifo, buf, len);
+}
+
+static struct musb *the_musb;
+
+/* This is used by gadget drivers, and OTG transceiver logic, allowing
+ * at most mA current to be drawn from VBUS during a Default-B session
+ * (that is, while VBUS exceeds 4.4V).  In Default-A (including pure host
+ * mode), or low power Default-B sessions, something else supplies power.
+ * Caller must take care of locking.
+ */
+static int tusb_draw_power(struct usb_phy *x, unsigned mA)
+{
+	struct musb	*musb = the_musb;
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		reg;
+
+	/* tps65030 seems to consume max 100mA, with maybe 60mA available
+	 * (measured on one board) for things other than tps and tusb.
+	 *
+	 * Boards sharing the CPU clock with CLKIN will need to prevent
+	 * certain idle sleep states while the USB link is active.
+	 *
+	 * REVISIT we could use VBUS to supply only _one_ of { 1.5V, 3.3V }.
+	 * The actual current usage would be very board-specific.  For now,
+	 * it's simpler to just use an aggregate (also board-specific).
+	 */
+	if (x->otg->default_a || mA < (musb->min_power << 1))
+		mA = 0;
+
+	reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
+	if (mA) {
+		musb->is_bus_powered = 1;
+		reg |= TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN;
+	} else {
+		musb->is_bus_powered = 0;
+		reg &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
+	}
+	musb_writel(tbase, TUSB_PRCM_MNGMT, reg);
+
+	dev_dbg(musb->controller, "draw max %d mA VBUS\n", mA);
+	return 0;
+}
+
+/* workaround for issue 13:  change clock during chip idle
+ * (to be fixed in rev3 silicon) ... symptoms include disconnect
+ * or looping suspend/resume cycles
+ */
+static void tusb_set_clock_source(struct musb *musb, unsigned mode)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		reg;
+
+	reg = musb_readl(tbase, TUSB_PRCM_CONF);
+	reg &= ~TUSB_PRCM_CONF_SYS_CLKSEL(0x3);
+
+	/* 0 = refclk (clkin, XI)
+	 * 1 = PHY 60 MHz (internal PLL)
+	 * 2 = not supported
+	 * 3 = what?
+	 */
+	if (mode > 0)
+		reg |= TUSB_PRCM_CONF_SYS_CLKSEL(mode & 0x3);
+
+	musb_writel(tbase, TUSB_PRCM_CONF, reg);
+
+	/* FIXME tusb6010_platform_retime(mode == 0); */
+}
+
+/*
+ * Idle TUSB6010 until next wake-up event; NOR access always wakes.
+ * Other code ensures that we idle unless we're connected _and_ the
+ * USB link is not suspended ... and tells us the relevant wakeup
+ * events.  SW_EN for voltage is handled separately.
+ */
+static void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		reg;
+
+	if ((wakeup_enables & TUSB_PRCM_WBUS)
+			&& (musb->tusb_revision == TUSB_REV_30))
+		tusb_wbus_quirk(musb, 1);
+
+	tusb_set_clock_source(musb, 0);
+
+	wakeup_enables |= TUSB_PRCM_WNORCS;
+	musb_writel(tbase, TUSB_PRCM_WAKEUP_MASK, ~wakeup_enables);
+
+	/* REVISIT writeup of WID implies that if WID set and ID is grounded,
+	 * TUSB_PHY_OTG_CTRL.TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP must be cleared.
+	 * Presumably that's mostly to save power, hence WID is immaterial ...
+	 */
+
+	reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
+	/* issue 4: when driving vbus, use hipower (vbus_det) comparator */
+	if (is_host_active(musb)) {
+		reg |= TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+		reg &= ~TUSB_PRCM_MNGMT_OTG_SESS_END_EN;
+	} else {
+		reg |= TUSB_PRCM_MNGMT_OTG_SESS_END_EN;
+		reg &= ~TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+	}
+	reg |= TUSB_PRCM_MNGMT_PM_IDLE | TUSB_PRCM_MNGMT_DEV_IDLE;
+	musb_writel(tbase, TUSB_PRCM_MNGMT, reg);
+
+	dev_dbg(musb->controller, "idle, wake on %02x\n", wakeup_enables);
+}
+
+/*
+ * Updates cable VBUS status. Caller must take care of locking.
+ */
+static int tusb_musb_vbus_status(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		otg_stat, prcm_mngmt;
+	int		ret = 0;
+
+	otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	prcm_mngmt = musb_readl(tbase, TUSB_PRCM_MNGMT);
+
+	/* Temporarily enable VBUS detection if it was disabled for
+	 * suspend mode. Unless it's enabled otg_stat and devctl will
+	 * not show correct VBUS state.
+	 */
+	if (!(prcm_mngmt & TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN)) {
+		u32 tmp = prcm_mngmt;
+		tmp |= TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+		musb_writel(tbase, TUSB_PRCM_MNGMT, tmp);
+		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+		musb_writel(tbase, TUSB_PRCM_MNGMT, prcm_mngmt);
+	}
+
+	if (otg_stat & TUSB_DEV_OTG_STAT_VBUS_VALID)
+		ret = 1;
+
+	return ret;
+}
+
+static void musb_do_idle(struct timer_list *t)
+{
+	struct musb	*musb = from_timer(musb, t, dev_timer);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_A_WAIT_BCON:
+		if ((musb->a_wait_bcon != 0)
+			&& (musb->idle_timeout == 0
+				|| time_after(jiffies, musb->idle_timeout))) {
+			dev_dbg(musb->controller, "Nothing connected %s, turning off VBUS\n",
+					usb_otg_state_string(musb->xceiv->otg->state));
+		}
+		fallthrough;
+	case OTG_STATE_A_IDLE:
+		tusb_musb_set_vbus(musb, 0);
+		break;
+	default:
+		break;
+	}
+
+	if (!musb->is_active) {
+		u32	wakeups;
+
+		/* wait until hub_wq handles port change status */
+		if (is_host_active(musb) && (musb->port1_status >> 16))
+			goto done;
+
+		if (!musb->gadget_driver) {
+			wakeups = 0;
+		} else {
+			wakeups = TUSB_PRCM_WHOSTDISCON
+				| TUSB_PRCM_WBUS
+					| TUSB_PRCM_WVBUS;
+			wakeups |= TUSB_PRCM_WID;
+		}
+		tusb_allow_idle(musb, wakeups);
+	}
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+/*
+ * Maybe put TUSB6010 into idle mode depending on USB link status,
+ * like "disconnected" or "suspended".  We'll be woken out of it by
+ * connect, resume, or disconnect.
+ *
+ * Needs to be called as the last function everywhere where there is
+ * register access to TUSB6010 because of NOR flash wake-up.
+ * Caller should own controller spinlock.
+ *
+ * Delay because peripheral enables D+ pullup 3msec after SE0, and
+ * we don't want to treat that full speed J as a wakeup event.
+ * ... peripherals must draw only suspend current after 10 msec.
+ */
+static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout)
+{
+	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
+	static unsigned long	last_timer;
+
+	if (timeout == 0)
+		timeout = default_timeout;
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || ((musb->a_wait_bcon == 0)
+			&& (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON))) {
+		dev_dbg(musb->controller, "%s active, deleting timer\n",
+			usb_otg_state_string(musb->xceiv->otg->state));
+		del_timer(&musb->dev_timer);
+		last_timer = jiffies;
+		return;
+	}
+
+	if (time_after(last_timer, timeout)) {
+		if (!timer_pending(&musb->dev_timer))
+			last_timer = timeout;
+		else {
+			dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n");
+			return;
+		}
+	}
+	last_timer = timeout;
+
+	dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
+		usb_otg_state_string(musb->xceiv->otg->state),
+		(unsigned long)jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&musb->dev_timer, timeout);
+}
+
+/* ticks of 60 MHz clock */
+#define DEVCLOCK		60000000
+#define OTG_TIMER_MS(msecs)	((msecs) \
+		? (TUSB_DEV_OTG_TIMER_VAL((DEVCLOCK/1000)*(msecs)) \
+				| TUSB_DEV_OTG_TIMER_ENABLE) \
+		: 0)
+
+static void tusb_musb_set_vbus(struct musb *musb, int is_on)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		conf, prcm, timer;
+	u8		devctl;
+	struct usb_otg	*otg = musb->xceiv->otg;
+
+	/* HDRC controls CPEN, but beware current surges during device
+	 * connect.  They can trigger transient overcurrent conditions
+	 * that must be ignored.
+	 */
+
+	prcm = musb_readl(tbase, TUSB_PRCM_MNGMT);
+	conf = musb_readl(tbase, TUSB_DEV_CONF);
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	if (is_on) {
+		timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
+		otg->default_a = 1;
+		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+		devctl |= MUSB_DEVCTL_SESSION;
+
+		conf |= TUSB_DEV_CONF_USB_HOST_MODE;
+		MUSB_HST_MODE(musb);
+	} else {
+		u32	otg_stat;
+
+		timer = 0;
+
+		/* If ID pin is grounded, we want to be a_idle */
+		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+		if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) {
+			switch (musb->xceiv->otg->state) {
+			case OTG_STATE_A_WAIT_VRISE:
+			case OTG_STATE_A_WAIT_BCON:
+				musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
+				break;
+			case OTG_STATE_A_WAIT_VFALL:
+				musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+				break;
+			default:
+				musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+			}
+			musb->is_active = 0;
+			otg->default_a = 1;
+			MUSB_HST_MODE(musb);
+		} else {
+			musb->is_active = 0;
+			otg->default_a = 0;
+			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+			MUSB_DEV_MODE(musb);
+		}
+
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		conf &= ~TUSB_DEV_CONF_USB_HOST_MODE;
+	}
+	prcm &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
+
+	musb_writel(tbase, TUSB_PRCM_MNGMT, prcm);
+	musb_writel(tbase, TUSB_DEV_OTG_TIMER, timer);
+	musb_writel(tbase, TUSB_DEV_CONF, conf);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	dev_dbg(musb->controller, "VBUS %s, devctl %02x otg %3x conf %08x prcm %08x\n",
+		usb_otg_state_string(musb->xceiv->otg->state),
+		musb_readb(musb->mregs, MUSB_DEVCTL),
+		musb_readl(tbase, TUSB_DEV_OTG_STAT),
+		conf, prcm);
+}
+
+/*
+ * Sets the mode to OTG, peripheral or host by changing the ID detection.
+ * Caller must take care of locking.
+ *
+ * Note that if a mini-A cable is plugged in the ID line will stay down as
+ * the weak ID pull-up is not able to pull the ID up.
+ */
+static int tusb_musb_set_mode(struct musb *musb, u8 musb_mode)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf;
+
+	otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+	phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+	dev_conf = musb_readl(tbase, TUSB_DEV_CONF);
+
+	switch (musb_mode) {
+
+	case MUSB_HOST:		/* Disable PHY ID detect, ground ID */
+		phy_otg_ctrl &= ~TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		dev_conf |= TUSB_DEV_CONF_ID_SEL;
+		dev_conf &= ~TUSB_DEV_CONF_SOFT_ID;
+		break;
+	case MUSB_PERIPHERAL:	/* Disable PHY ID detect, keep ID pull-up on */
+		phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		dev_conf |= (TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
+		break;
+	case MUSB_OTG:		/* Use PHY ID detection */
+		phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		dev_conf &= ~(TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
+		break;
+
+	default:
+		dev_dbg(musb->controller, "Trying to set mode %i\n", musb_mode);
+		return -EINVAL;
+	}
+
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL,
+			TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ctrl);
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE,
+			TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ena);
+	musb_writel(tbase, TUSB_DEV_CONF, dev_conf);
+
+	otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	if ((musb_mode == MUSB_PERIPHERAL) &&
+		!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS))
+			INFO("Cannot be peripheral with mini-A cable "
+			"otg_stat: %08x\n", otg_stat);
+
+	return 0;
+}
+
+static inline unsigned long
+tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
+{
+	u32		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	unsigned long	idle_timeout = 0;
+	struct usb_otg	*otg = musb->xceiv->otg;
+
+	/* ID pin */
+	if ((int_src & TUSB_INT_SRC_ID_STATUS_CHNG)) {
+		int	default_a;
+
+		default_a = !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS);
+		dev_dbg(musb->controller, "Default-%c\n", default_a ? 'A' : 'B');
+		otg->default_a = default_a;
+		tusb_musb_set_vbus(musb, default_a);
+
+		/* Don't allow idling immediately */
+		if (default_a)
+			idle_timeout = jiffies + (HZ * 3);
+	}
+
+	/* VBUS state change */
+	if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) {
+
+		/* B-dev state machine:  no vbus ~= disconnect */
+		if (!otg->default_a) {
+			/* ? musb_root_disconnect(musb); */
+			musb->port1_status &=
+				~(USB_PORT_STAT_CONNECTION
+				| USB_PORT_STAT_ENABLE
+				| USB_PORT_STAT_LOW_SPEED
+				| USB_PORT_STAT_HIGH_SPEED
+				| USB_PORT_STAT_TEST
+				);
+
+			if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
+				dev_dbg(musb->controller, "Forcing disconnect (no interrupt)\n");
+				if (musb->xceiv->otg->state != OTG_STATE_B_IDLE) {
+					/* INTR_DISCONNECT can hide... */
+					musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+					musb->int_usb |= MUSB_INTR_DISCONNECT;
+				}
+				musb->is_active = 0;
+			}
+			dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
+				usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
+			idle_timeout = jiffies + (1 * HZ);
+			schedule_delayed_work(&musb->irq_work, 0);
+
+		} else /* A-dev state machine */ {
+			dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
+				usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
+
+			switch (musb->xceiv->otg->state) {
+			case OTG_STATE_A_IDLE:
+				dev_dbg(musb->controller, "Got SRP, turning on VBUS\n");
+				musb_platform_set_vbus(musb, 1);
+
+				/* CONNECT can wake if a_wait_bcon is set */
+				if (musb->a_wait_bcon != 0)
+					musb->is_active = 0;
+				else
+					musb->is_active = 1;
+
+				/*
+				 * OPT FS A TD.4.6 needs few seconds for
+				 * A_WAIT_VRISE
+				 */
+				idle_timeout = jiffies + (2 * HZ);
+
+				break;
+			case OTG_STATE_A_WAIT_VRISE:
+				/* ignore; A-session-valid < VBUS_VALID/2,
+				 * we monitor this with the timer
+				 */
+				break;
+			case OTG_STATE_A_WAIT_VFALL:
+				/* REVISIT this irq triggers during short
+				 * spikes caused by enumeration ...
+				 */
+				if (musb->vbuserr_retry) {
+					musb->vbuserr_retry--;
+					tusb_musb_set_vbus(musb, 1);
+				} else {
+					musb->vbuserr_retry
+						= VBUSERR_RETRY_COUNT;
+					tusb_musb_set_vbus(musb, 0);
+				}
+				break;
+			default:
+				break;
+			}
+		}
+	}
+
+	/* OTG timer expiration */
+	if (int_src & TUSB_INT_SRC_OTG_TIMEOUT) {
+		u8	devctl;
+
+		dev_dbg(musb->controller, "%s timer, %03x\n",
+			usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
+
+		switch (musb->xceiv->otg->state) {
+		case OTG_STATE_A_WAIT_VRISE:
+			/* VBUS has probably been valid for a while now,
+			 * but may well have bounced out of range a bit
+			 */
+			devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+			if (otg_stat & TUSB_DEV_OTG_STAT_VBUS_VALID) {
+				if ((devctl & MUSB_DEVCTL_VBUS)
+						!= MUSB_DEVCTL_VBUS) {
+					dev_dbg(musb->controller, "devctl %02x\n", devctl);
+					break;
+				}
+				musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
+				musb->is_active = 0;
+				idle_timeout = jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon);
+			} else {
+				/* REVISIT report overcurrent to hub? */
+				ERR("vbus too slow, devctl %02x\n", devctl);
+				tusb_musb_set_vbus(musb, 0);
+			}
+			break;
+		case OTG_STATE_A_WAIT_BCON:
+			if (musb->a_wait_bcon != 0)
+				idle_timeout = jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon);
+			break;
+		case OTG_STATE_A_SUSPEND:
+			break;
+		case OTG_STATE_B_WAIT_ACON:
+			break;
+		default:
+			break;
+		}
+	}
+	schedule_delayed_work(&musb->irq_work, 0);
+
+	return idle_timeout;
+}
+
+static irqreturn_t tusb_musb_interrupt(int irq, void *__hci)
+{
+	struct musb	*musb = __hci;
+	void __iomem	*tbase = musb->ctrl_base;
+	unsigned long	flags, idle_timeout = 0;
+	u32		int_mask, int_src;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/* Mask all interrupts to allow using both edge and level GPIO irq */
+	int_mask = musb_readl(tbase, TUSB_INT_MASK);
+	musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
+
+	int_src = musb_readl(tbase, TUSB_INT_SRC) & ~TUSB_INT_SRC_RESERVED_BITS;
+	dev_dbg(musb->controller, "TUSB IRQ %08x\n", int_src);
+
+	musb->int_usb = (u8) int_src;
+
+	/* Acknowledge wake-up source interrupts */
+	if (int_src & TUSB_INT_SRC_DEV_WAKEUP) {
+		u32	reg;
+		u32	i;
+
+		if (musb->tusb_revision == TUSB_REV_30)
+			tusb_wbus_quirk(musb, 0);
+
+		/* there are issues re-locking the PLL on wakeup ... */
+
+		/* work around issue 8 */
+		for (i = 0xf7f7f7; i > 0xf7f7f7 - 1000; i--) {
+			musb_writel(tbase, TUSB_SCRATCH_PAD, 0);
+			musb_writel(tbase, TUSB_SCRATCH_PAD, i);
+			reg = musb_readl(tbase, TUSB_SCRATCH_PAD);
+			if (reg == i)
+				break;
+			dev_dbg(musb->controller, "TUSB NOR not ready\n");
+		}
+
+		/* work around issue 13 (2nd half) */
+		tusb_set_clock_source(musb, 1);
+
+		reg = musb_readl(tbase, TUSB_PRCM_WAKEUP_SOURCE);
+		musb_writel(tbase, TUSB_PRCM_WAKEUP_CLEAR, reg);
+		if (reg & ~TUSB_PRCM_WNORCS) {
+			musb->is_active = 1;
+			schedule_delayed_work(&musb->irq_work, 0);
+		}
+		dev_dbg(musb->controller, "wake %sactive %02x\n",
+				musb->is_active ? "" : "in", reg);
+
+		/* REVISIT host side TUSB_PRCM_WHOSTDISCON, TUSB_PRCM_WBUS */
+	}
+
+	if (int_src & TUSB_INT_SRC_USB_IP_CONN)
+		del_timer(&musb->dev_timer);
+
+	/* OTG state change reports (annoyingly) not issued by Mentor core */
+	if (int_src & (TUSB_INT_SRC_VBUS_SENSE_CHNG
+				| TUSB_INT_SRC_OTG_TIMEOUT
+				| TUSB_INT_SRC_ID_STATUS_CHNG))
+		idle_timeout = tusb_otg_ints(musb, int_src, tbase);
+
+	/*
+	 * Just clear the DMA interrupt if it comes as the completion for both
+	 * TX and RX is handled by the DMA callback in tusb6010_omap
+	 */
+	if ((int_src & TUSB_INT_SRC_TXRX_DMA_DONE)) {
+		u32	dma_src = musb_readl(tbase, TUSB_DMA_INT_SRC);
+
+		dev_dbg(musb->controller, "DMA IRQ %08x\n", dma_src);
+		musb_writel(tbase, TUSB_DMA_INT_CLEAR, dma_src);
+	}
+
+	/* EP interrupts. In OCP mode tusb6010 mirrors the MUSB interrupts */
+	if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX)) {
+		u32	musb_src = musb_readl(tbase, TUSB_USBIP_INT_SRC);
+
+		musb_writel(tbase, TUSB_USBIP_INT_CLEAR, musb_src);
+		musb->int_rx = (((musb_src >> 16) & 0xffff) << 1);
+		musb->int_tx = (musb_src & 0xffff);
+	} else {
+		musb->int_rx = 0;
+		musb->int_tx = 0;
+	}
+
+	if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX | 0xff))
+		musb_interrupt(musb);
+
+	/* Acknowledge TUSB interrupts. Clear only non-reserved bits */
+	musb_writel(tbase, TUSB_INT_SRC_CLEAR,
+		int_src & ~TUSB_INT_MASK_RESERVED_BITS);
+
+	tusb_musb_try_idle(musb, idle_timeout);
+
+	musb_writel(tbase, TUSB_INT_MASK, int_mask);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static int dma_off;
+
+/*
+ * Enables TUSB6010. Caller must take care of locking.
+ * REVISIT:
+ * - Check what is unnecessary in MGC_HdrcStart()
+ */
+static void tusb_musb_enable(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+
+	/* Setup TUSB6010 main interrupt mask. Enable all interrupts except SOF.
+	 * REVISIT: Enable and deal with TUSB_INT_SRC_USB_IP_SOF */
+	musb_writel(tbase, TUSB_INT_MASK, TUSB_INT_SRC_USB_IP_SOF);
+
+	/* Setup TUSB interrupt, disable DMA and GPIO interrupts */
+	musb_writel(tbase, TUSB_USBIP_INT_MASK, 0);
+	musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
+	musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
+
+	/* Clear all subsystem interrups */
+	musb_writel(tbase, TUSB_USBIP_INT_CLEAR, 0x7fffffff);
+	musb_writel(tbase, TUSB_DMA_INT_CLEAR, 0x7fffffff);
+	musb_writel(tbase, TUSB_GPIO_INT_CLEAR, 0x1ff);
+
+	/* Acknowledge pending interrupt(s) */
+	musb_writel(tbase, TUSB_INT_SRC_CLEAR, ~TUSB_INT_MASK_RESERVED_BITS);
+
+	/* Only 0 clock cycles for minimum interrupt de-assertion time and
+	 * interrupt polarity active low seems to work reliably here */
+	musb_writel(tbase, TUSB_INT_CTRL_CONF,
+			TUSB_INT_CTRL_CONF_INT_RELCYC(0));
+
+	irq_set_irq_type(musb->nIrq, IRQ_TYPE_LEVEL_LOW);
+
+	/* maybe force into the Default-A OTG state machine */
+	if (!(musb_readl(tbase, TUSB_DEV_OTG_STAT)
+			& TUSB_DEV_OTG_STAT_ID_STATUS))
+		musb_writel(tbase, TUSB_INT_SRC_SET,
+				TUSB_INT_SRC_ID_STATUS_CHNG);
+
+	if (is_dma_capable() && dma_off)
+		printk(KERN_WARNING "%s %s: dma not reactivated\n",
+				__FILE__, __func__);
+	else
+		dma_off = 1;
+}
+
+/*
+ * Disables TUSB6010. Caller must take care of locking.
+ */
+static void tusb_musb_disable(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+
+	/* FIXME stop DMA, IRQs, timers, ... */
+
+	/* disable all IRQs */
+	musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
+	musb_writel(tbase, TUSB_USBIP_INT_MASK, 0x7fffffff);
+	musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
+	musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
+
+	del_timer(&musb->dev_timer);
+
+	if (is_dma_capable() && !dma_off) {
+		printk(KERN_WARNING "%s %s: dma still active\n",
+				__FILE__, __func__);
+		dma_off = 1;
+	}
+}
+
+/*
+ * Sets up TUSB6010 CPU interface specific signals and registers
+ * Note: Settings optimized for OMAP24xx
+ */
+static void tusb_setup_cpu_interface(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+
+	/*
+	 * Disable GPIO[5:0] pullups (used as output DMA requests)
+	 * Don't disable GPIO[7:6] as they are needed for wake-up.
+	 */
+	musb_writel(tbase, TUSB_PULLUP_1_CTRL, 0x0000003F);
+
+	/* Disable all pullups on NOR IF, DMAREQ0 and DMAREQ1 */
+	musb_writel(tbase, TUSB_PULLUP_2_CTRL, 0x01FFFFFF);
+
+	/* Turn GPIO[5:0] to DMAREQ[5:0] signals */
+	musb_writel(tbase, TUSB_GPIO_CONF, TUSB_GPIO_CONF_DMAREQ(0x3f));
+
+	/* Burst size 16x16 bits, all six DMA requests enabled, DMA request
+	 * de-assertion time 2 system clocks p 62 */
+	musb_writel(tbase, TUSB_DMA_REQ_CONF,
+		TUSB_DMA_REQ_CONF_BURST_SIZE(2) |
+		TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f) |
+		TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2));
+
+	/* Set 0 wait count for synchronous burst access */
+	musb_writel(tbase, TUSB_WAIT_COUNT, 1);
+}
+
+static int tusb_musb_start(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	int		ret = 0;
+	unsigned long	flags;
+	u32		reg;
+
+	if (musb->board_set_power)
+		ret = musb->board_set_power(1);
+	if (ret != 0) {
+		printk(KERN_ERR "tusb: Cannot enable TUSB6010\n");
+		return ret;
+	}
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb_readl(tbase, TUSB_PROD_TEST_RESET) !=
+		TUSB_PROD_TEST_RESET_VAL) {
+		printk(KERN_ERR "tusb: Unable to detect TUSB6010\n");
+		goto err;
+	}
+
+	musb->tusb_revision = tusb_get_revision(musb);
+	tusb_print_revision(musb);
+	if (musb->tusb_revision < 2) {
+		printk(KERN_ERR "tusb: Unsupported TUSB6010 revision %i\n",
+				musb->tusb_revision);
+		goto err;
+	}
+
+	/* The uint bit for "USB non-PDR interrupt enable" has to be 1 when
+	 * NOR FLASH interface is used */
+	musb_writel(tbase, TUSB_VLYNQ_CTRL, 8);
+
+	/* Select PHY free running 60MHz as a system clock */
+	tusb_set_clock_source(musb, 1);
+
+	/* VBus valid timer 1us, disable DFT/Debug and VLYNQ clocks for
+	 * power saving, enable VBus detect and session end comparators,
+	 * enable IDpullup, enable VBus charging */
+	musb_writel(tbase, TUSB_PRCM_MNGMT,
+		TUSB_PRCM_MNGMT_VBUS_VALID_TIMER(0xa) |
+		TUSB_PRCM_MNGMT_VBUS_VALID_FLT_EN |
+		TUSB_PRCM_MNGMT_OTG_SESS_END_EN |
+		TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN |
+		TUSB_PRCM_MNGMT_OTG_ID_PULLUP);
+	tusb_setup_cpu_interface(musb);
+
+	/* simplify:  always sense/pullup ID pins, as if in OTG mode */
+	reg = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+	reg |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, reg);
+
+	reg = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+	reg |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL, reg);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return 0;
+
+err:
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (musb->board_set_power)
+		musb->board_set_power(0);
+
+	return -ENODEV;
+}
+
+static int tusb_musb_init(struct musb *musb)
+{
+	struct platform_device	*pdev;
+	struct resource		*mem;
+	void __iomem		*sync = NULL;
+	int			ret;
+
+	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv))
+		return -EPROBE_DEFER;
+
+	pdev = to_platform_device(musb->controller);
+
+	/* dma address for async dma */
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		pr_debug("no async dma resource?\n");
+		ret = -ENODEV;
+		goto done;
+	}
+	musb->async = mem->start;
+
+	/* dma address for sync dma */
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!mem) {
+		pr_debug("no sync dma resource?\n");
+		ret = -ENODEV;
+		goto done;
+	}
+	musb->sync = mem->start;
+
+	sync = ioremap(mem->start, resource_size(mem));
+	if (!sync) {
+		pr_debug("ioremap for sync failed\n");
+		ret = -ENOMEM;
+		goto done;
+	}
+	musb->sync_va = sync;
+
+	/* Offsets from base: VLYNQ at 0x000, MUSB regs at 0x400,
+	 * FIFOs at 0x600, TUSB at 0x800
+	 */
+	musb->mregs += TUSB_BASE_OFFSET;
+
+	ret = tusb_musb_start(musb);
+	if (ret) {
+		printk(KERN_ERR "Could not start tusb6010 (%d)\n",
+				ret);
+		goto done;
+	}
+	musb->isr = tusb_musb_interrupt;
+
+	musb->xceiv->set_power = tusb_draw_power;
+	the_musb = musb;
+
+	timer_setup(&musb->dev_timer, musb_do_idle, 0);
+
+done:
+	if (ret < 0) {
+		if (sync)
+			iounmap(sync);
+
+		usb_put_phy(musb->xceiv);
+	}
+	return ret;
+}
+
+static int tusb_musb_exit(struct musb *musb)
+{
+	del_timer_sync(&musb->dev_timer);
+	the_musb = NULL;
+
+	if (musb->board_set_power)
+		musb->board_set_power(0);
+
+	iounmap(musb->sync_va);
+
+	usb_put_phy(musb->xceiv);
+	return 0;
+}
+
+static const struct musb_platform_ops tusb_ops = {
+	.quirks		= MUSB_DMA_TUSB_OMAP | MUSB_IN_TUSB |
+			  MUSB_G_NO_SKB_RESERVE,
+	.init		= tusb_musb_init,
+	.exit		= tusb_musb_exit,
+
+	.ep_offset	= tusb_ep_offset,
+	.ep_select	= tusb_ep_select,
+	.fifo_offset	= tusb_fifo_offset,
+	.readb		= tusb_readb,
+	.writeb		= tusb_writeb,
+	.read_fifo	= tusb_read_fifo,
+	.write_fifo	= tusb_write_fifo,
+#ifdef CONFIG_USB_TUSB_OMAP_DMA
+	.dma_init	= tusb_dma_controller_create,
+	.dma_exit	= tusb_dma_controller_destroy,
+#endif
+	.enable		= tusb_musb_enable,
+	.disable	= tusb_musb_disable,
+
+	.set_mode	= tusb_musb_set_mode,
+	.try_idle	= tusb_musb_try_idle,
+
+	.vbus_status	= tusb_musb_vbus_status,
+	.set_vbus	= tusb_musb_set_vbus,
+};
+
+static const struct platform_device_info tusb_dev_info = {
+	.name		= "musb-hdrc",
+	.id		= PLATFORM_DEVID_AUTO,
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+static int tusb_probe(struct platform_device *pdev)
+{
+	struct resource musb_resources[3];
+	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
+	struct platform_device		*musb;
+	struct tusb6010_glue		*glue;
+	struct platform_device_info	pinfo;
+	int				ret;
+
+	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		return -ENOMEM;
+
+	glue->dev			= &pdev->dev;
+
+	pdata->platform_ops		= &tusb_ops;
+
+	usb_phy_generic_register();
+	platform_set_drvdata(pdev, glue);
+
+	memset(musb_resources, 0x00, sizeof(*musb_resources) *
+			ARRAY_SIZE(musb_resources));
+
+	musb_resources[0].name = pdev->resource[0].name;
+	musb_resources[0].start = pdev->resource[0].start;
+	musb_resources[0].end = pdev->resource[0].end;
+	musb_resources[0].flags = pdev->resource[0].flags;
+
+	musb_resources[1].name = pdev->resource[1].name;
+	musb_resources[1].start = pdev->resource[1].start;
+	musb_resources[1].end = pdev->resource[1].end;
+	musb_resources[1].flags = pdev->resource[1].flags;
+
+	musb_resources[2].name = pdev->resource[2].name;
+	musb_resources[2].start = pdev->resource[2].start;
+	musb_resources[2].end = pdev->resource[2].end;
+	musb_resources[2].flags = pdev->resource[2].flags;
+
+	pinfo = tusb_dev_info;
+	pinfo.parent = &pdev->dev;
+	pinfo.res = musb_resources;
+	pinfo.num_res = ARRAY_SIZE(musb_resources);
+	pinfo.data = pdata;
+	pinfo.size_data = sizeof(*pdata);
+
+	glue->musb = musb = platform_device_register_full(&pinfo);
+	if (IS_ERR(musb)) {
+		ret = PTR_ERR(musb);
+		dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tusb_remove(struct platform_device *pdev)
+{
+	struct tusb6010_glue		*glue = platform_get_drvdata(pdev);
+
+	platform_device_unregister(glue->musb);
+	usb_phy_generic_unregister(glue->phy);
+
+	return 0;
+}
+
+static struct platform_driver tusb_driver = {
+	.probe		= tusb_probe,
+	.remove		= tusb_remove,
+	.driver		= {
+		.name	= "musb-tusb",
+	},
+};
+
+MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+module_platform_driver(tusb_driver);
diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h
new file mode 100644
index 000000000..8a253564f
--- /dev/null
+++ b/drivers/usb/musb/tusb6010.h
@@ -0,0 +1,215 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Definitions for TUSB6010 USB 2.0 OTG Dual Role controller
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ */
+
+#ifndef __TUSB6010_H__
+#define __TUSB6010_H__
+
+/* VLYNQ control register. 32-bit at offset 0x000 */
+#define TUSB_VLYNQ_CTRL			0x004
+
+/* Mentor Graphics OTG core registers. 8,- 16- and 32-bit at offset 0x400 */
+#define TUSB_BASE_OFFSET		0x400
+
+/* FIFO registers 32-bit at offset 0x600 */
+#define TUSB_FIFO_BASE			0x600
+
+/* Device System & Control registers. 32-bit at offset 0x800 */
+#define TUSB_SYS_REG_BASE		0x800
+
+#define TUSB_DEV_CONF			(TUSB_SYS_REG_BASE + 0x000)
+#define		TUSB_DEV_CONF_USB_HOST_MODE		(1 << 16)
+#define		TUSB_DEV_CONF_PROD_TEST_MODE		(1 << 15)
+#define		TUSB_DEV_CONF_SOFT_ID			(1 << 1)
+#define		TUSB_DEV_CONF_ID_SEL			(1 << 0)
+
+#define TUSB_PHY_OTG_CTRL_ENABLE	(TUSB_SYS_REG_BASE + 0x004)
+#define TUSB_PHY_OTG_CTRL		(TUSB_SYS_REG_BASE + 0x008)
+#define		TUSB_PHY_OTG_CTRL_WRPROTECT		(0xa5 << 24)
+#define		TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP		(1 << 23)
+#define		TUSB_PHY_OTG_CTRL_OTG_VBUS_DET_EN	(1 << 19)
+#define		TUSB_PHY_OTG_CTRL_OTG_SESS_END_EN	(1 << 18)
+#define		TUSB_PHY_OTG_CTRL_TESTM2		(1 << 17)
+#define		TUSB_PHY_OTG_CTRL_TESTM1		(1 << 16)
+#define		TUSB_PHY_OTG_CTRL_TESTM0		(1 << 15)
+#define		TUSB_PHY_OTG_CTRL_TX_DATA2		(1 << 14)
+#define		TUSB_PHY_OTG_CTRL_TX_GZ2		(1 << 13)
+#define		TUSB_PHY_OTG_CTRL_TX_ENABLE2		(1 << 12)
+#define		TUSB_PHY_OTG_CTRL_DM_PULLDOWN		(1 << 11)
+#define		TUSB_PHY_OTG_CTRL_DP_PULLDOWN		(1 << 10)
+#define		TUSB_PHY_OTG_CTRL_OSC_EN		(1 << 9)
+#define		TUSB_PHY_OTG_CTRL_PHYREF_CLKSEL(v)	(((v) & 3) << 7)
+#define		TUSB_PHY_OTG_CTRL_PD			(1 << 6)
+#define		TUSB_PHY_OTG_CTRL_PLL_ON		(1 << 5)
+#define		TUSB_PHY_OTG_CTRL_EXT_RPU		(1 << 4)
+#define		TUSB_PHY_OTG_CTRL_PWR_GOOD		(1 << 3)
+#define		TUSB_PHY_OTG_CTRL_RESET			(1 << 2)
+#define		TUSB_PHY_OTG_CTRL_SUSPENDM		(1 << 1)
+#define		TUSB_PHY_OTG_CTRL_CLK_MODE		(1 << 0)
+
+/*OTG status register */
+#define TUSB_DEV_OTG_STAT		(TUSB_SYS_REG_BASE + 0x00c)
+#define		TUSB_DEV_OTG_STAT_PWR_CLK_GOOD		(1 << 8)
+#define		TUSB_DEV_OTG_STAT_SESS_END		(1 << 7)
+#define		TUSB_DEV_OTG_STAT_SESS_VALID		(1 << 6)
+#define		TUSB_DEV_OTG_STAT_VBUS_VALID		(1 << 5)
+#define		TUSB_DEV_OTG_STAT_VBUS_SENSE		(1 << 4)
+#define		TUSB_DEV_OTG_STAT_ID_STATUS		(1 << 3)
+#define		TUSB_DEV_OTG_STAT_HOST_DISCON		(1 << 2)
+#define		TUSB_DEV_OTG_STAT_LINE_STATE		(3 << 0)
+#define		TUSB_DEV_OTG_STAT_DP_ENABLE		(1 << 1)
+#define		TUSB_DEV_OTG_STAT_DM_ENABLE		(1 << 0)
+
+#define TUSB_DEV_OTG_TIMER		(TUSB_SYS_REG_BASE + 0x010)
+#	define TUSB_DEV_OTG_TIMER_ENABLE		(1 << 31)
+#	define TUSB_DEV_OTG_TIMER_VAL(v)		((v) & 0x07ffffff)
+#define TUSB_PRCM_REV			(TUSB_SYS_REG_BASE + 0x014)
+
+/* PRCM configuration register */
+#define TUSB_PRCM_CONF			(TUSB_SYS_REG_BASE + 0x018)
+#define		TUSB_PRCM_CONF_SFW_CPEN		(1 << 24)
+#define		TUSB_PRCM_CONF_SYS_CLKSEL(v)	(((v) & 3) << 16)
+
+/* PRCM management register */
+#define TUSB_PRCM_MNGMT			(TUSB_SYS_REG_BASE + 0x01c)
+#define		TUSB_PRCM_MNGMT_SRP_FIX_TIMER(v)	(((v) & 0xf) << 25)
+#define		TUSB_PRCM_MNGMT_SRP_FIX_EN		(1 << 24)
+#define		TUSB_PRCM_MNGMT_VBUS_VALID_TIMER(v)	(((v) & 0xf) << 20)
+#define		TUSB_PRCM_MNGMT_VBUS_VALID_FLT_EN	(1 << 19)
+#define		TUSB_PRCM_MNGMT_DFT_CLK_DIS		(1 << 18)
+#define		TUSB_PRCM_MNGMT_VLYNQ_CLK_DIS		(1 << 17)
+#define		TUSB_PRCM_MNGMT_OTG_SESS_END_EN		(1 << 10)
+#define		TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN		(1 << 9)
+#define		TUSB_PRCM_MNGMT_OTG_ID_PULLUP		(1 << 8)
+#define		TUSB_PRCM_MNGMT_15_SW_EN		(1 << 4)
+#define		TUSB_PRCM_MNGMT_33_SW_EN		(1 << 3)
+#define		TUSB_PRCM_MNGMT_5V_CPEN			(1 << 2)
+#define		TUSB_PRCM_MNGMT_PM_IDLE			(1 << 1)
+#define		TUSB_PRCM_MNGMT_DEV_IDLE		(1 << 0)
+
+/* Wake-up source clear and mask registers */
+#define TUSB_PRCM_WAKEUP_SOURCE		(TUSB_SYS_REG_BASE + 0x020)
+#define TUSB_PRCM_WAKEUP_CLEAR		(TUSB_SYS_REG_BASE + 0x028)
+#define TUSB_PRCM_WAKEUP_MASK		(TUSB_SYS_REG_BASE + 0x02c)
+#define		TUSB_PRCM_WAKEUP_RESERVED_BITS	(0xffffe << 13)
+#define		TUSB_PRCM_WGPIO_7	(1 << 12)
+#define		TUSB_PRCM_WGPIO_6	(1 << 11)
+#define		TUSB_PRCM_WGPIO_5	(1 << 10)
+#define		TUSB_PRCM_WGPIO_4	(1 << 9)
+#define		TUSB_PRCM_WGPIO_3	(1 << 8)
+#define		TUSB_PRCM_WGPIO_2	(1 << 7)
+#define		TUSB_PRCM_WGPIO_1	(1 << 6)
+#define		TUSB_PRCM_WGPIO_0	(1 << 5)
+#define		TUSB_PRCM_WHOSTDISCON	(1 << 4)	/* Host disconnect */
+#define		TUSB_PRCM_WBUS		(1 << 3)	/* USB bus resume */
+#define		TUSB_PRCM_WNORCS	(1 << 2)	/* NOR chip select */
+#define		TUSB_PRCM_WVBUS		(1 << 1)	/* OTG PHY VBUS */
+#define		TUSB_PRCM_WID		(1 << 0)	/* OTG PHY ID detect */
+
+#define TUSB_PULLUP_1_CTRL		(TUSB_SYS_REG_BASE + 0x030)
+#define TUSB_PULLUP_2_CTRL		(TUSB_SYS_REG_BASE + 0x034)
+#define TUSB_INT_CTRL_REV		(TUSB_SYS_REG_BASE + 0x038)
+#define TUSB_INT_CTRL_CONF		(TUSB_SYS_REG_BASE + 0x03c)
+#define TUSB_USBIP_INT_SRC		(TUSB_SYS_REG_BASE + 0x040)
+#define TUSB_USBIP_INT_SET		(TUSB_SYS_REG_BASE + 0x044)
+#define TUSB_USBIP_INT_CLEAR		(TUSB_SYS_REG_BASE + 0x048)
+#define TUSB_USBIP_INT_MASK		(TUSB_SYS_REG_BASE + 0x04c)
+#define TUSB_DMA_INT_SRC		(TUSB_SYS_REG_BASE + 0x050)
+#define TUSB_DMA_INT_SET		(TUSB_SYS_REG_BASE + 0x054)
+#define TUSB_DMA_INT_CLEAR		(TUSB_SYS_REG_BASE + 0x058)
+#define TUSB_DMA_INT_MASK		(TUSB_SYS_REG_BASE + 0x05c)
+#define TUSB_GPIO_INT_SRC		(TUSB_SYS_REG_BASE + 0x060)
+#define TUSB_GPIO_INT_SET		(TUSB_SYS_REG_BASE + 0x064)
+#define TUSB_GPIO_INT_CLEAR		(TUSB_SYS_REG_BASE + 0x068)
+#define TUSB_GPIO_INT_MASK		(TUSB_SYS_REG_BASE + 0x06c)
+
+/* NOR flash interrupt source registers */
+#define TUSB_INT_SRC			(TUSB_SYS_REG_BASE + 0x070)
+#define TUSB_INT_SRC_SET		(TUSB_SYS_REG_BASE + 0x074)
+#define TUSB_INT_SRC_CLEAR		(TUSB_SYS_REG_BASE + 0x078)
+#define TUSB_INT_MASK			(TUSB_SYS_REG_BASE + 0x07c)
+#define		TUSB_INT_SRC_TXRX_DMA_DONE		(1 << 24)
+#define		TUSB_INT_SRC_USB_IP_CORE		(1 << 17)
+#define		TUSB_INT_SRC_OTG_TIMEOUT		(1 << 16)
+#define		TUSB_INT_SRC_VBUS_SENSE_CHNG		(1 << 15)
+#define		TUSB_INT_SRC_ID_STATUS_CHNG		(1 << 14)
+#define		TUSB_INT_SRC_DEV_WAKEUP			(1 << 13)
+#define		TUSB_INT_SRC_DEV_READY			(1 << 12)
+#define		TUSB_INT_SRC_USB_IP_TX			(1 << 9)
+#define		TUSB_INT_SRC_USB_IP_RX			(1 << 8)
+#define		TUSB_INT_SRC_USB_IP_VBUS_ERR		(1 << 7)
+#define		TUSB_INT_SRC_USB_IP_VBUS_REQ		(1 << 6)
+#define		TUSB_INT_SRC_USB_IP_DISCON		(1 << 5)
+#define		TUSB_INT_SRC_USB_IP_CONN		(1 << 4)
+#define		TUSB_INT_SRC_USB_IP_SOF			(1 << 3)
+#define		TUSB_INT_SRC_USB_IP_RST_BABBLE		(1 << 2)
+#define		TUSB_INT_SRC_USB_IP_RESUME		(1 << 1)
+#define		TUSB_INT_SRC_USB_IP_SUSPEND		(1 << 0)
+
+/* NOR flash interrupt registers reserved bits. Must be written as 0 */
+#define		TUSB_INT_MASK_RESERVED_17		(0x3fff << 17)
+#define		TUSB_INT_MASK_RESERVED_13		(1 << 13)
+#define		TUSB_INT_MASK_RESERVED_8		(0xf << 8)
+#define		TUSB_INT_SRC_RESERVED_26		(0x1f << 26)
+#define		TUSB_INT_SRC_RESERVED_18		(0x3f << 18)
+#define		TUSB_INT_SRC_RESERVED_10		(0x03 << 10)
+
+/* Reserved bits for NOR flash interrupt mask and clear register */
+#define		TUSB_INT_MASK_RESERVED_BITS	(TUSB_INT_MASK_RESERVED_17 | \
+						TUSB_INT_MASK_RESERVED_13 | \
+						TUSB_INT_MASK_RESERVED_8)
+
+/* Reserved bits for NOR flash interrupt status register */
+#define		TUSB_INT_SRC_RESERVED_BITS	(TUSB_INT_SRC_RESERVED_26 | \
+						TUSB_INT_SRC_RESERVED_18 | \
+						TUSB_INT_SRC_RESERVED_10)
+
+#define TUSB_GPIO_REV			(TUSB_SYS_REG_BASE + 0x080)
+#define TUSB_GPIO_CONF			(TUSB_SYS_REG_BASE + 0x084)
+#define TUSB_DMA_CTRL_REV		(TUSB_SYS_REG_BASE + 0x100)
+#define TUSB_DMA_REQ_CONF		(TUSB_SYS_REG_BASE + 0x104)
+#define TUSB_EP0_CONF			(TUSB_SYS_REG_BASE + 0x108)
+#define TUSB_DMA_EP_MAP			(TUSB_SYS_REG_BASE + 0x148)
+
+/* Offsets from each ep base register */
+#define TUSB_EP_TX_OFFSET		0x10c	/* EP_IN in docs */
+#define TUSB_EP_RX_OFFSET		0x14c	/* EP_OUT in docs */
+#define TUSB_EP_MAX_PACKET_SIZE_OFFSET	0x188
+
+#define TUSB_WAIT_COUNT			(TUSB_SYS_REG_BASE + 0x1c8)
+#define TUSB_SCRATCH_PAD		(TUSB_SYS_REG_BASE + 0x1c4)
+#define TUSB_PROD_TEST_RESET		(TUSB_SYS_REG_BASE + 0x1d8)
+
+/* Device System & Control register bitfields */
+#define TUSB_INT_CTRL_CONF_INT_RELCYC(v)	(((v) & 0x7) << 18)
+#define TUSB_INT_CTRL_CONF_INT_POLARITY		(1 << 17)
+#define TUSB_INT_CTRL_CONF_INT_MODE		(1 << 16)
+#define TUSB_GPIO_CONF_DMAREQ(v)		(((v) & 0x3f) << 24)
+#define TUSB_DMA_REQ_CONF_BURST_SIZE(v)		(((v) & 3) << 26)
+#define TUSB_DMA_REQ_CONF_DMA_REQ_EN(v)		(((v) & 0x3f) << 20)
+#define TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(v)	(((v) & 0xf) << 16)
+#define TUSB_EP0_CONFIG_SW_EN			(1 << 8)
+#define TUSB_EP0_CONFIG_DIR_TX			(1 << 7)
+#define TUSB_EP0_CONFIG_XFR_SIZE(v)		((v) & 0x7f)
+#define TUSB_EP_CONFIG_SW_EN			(1 << 31)
+#define TUSB_EP_CONFIG_XFR_SIZE(v)		((v) & 0x7fffffff)
+#define TUSB_PROD_TEST_RESET_VAL		0xa596
+#define TUSB_EP_FIFO(ep)			(TUSB_FIFO_BASE + (ep) * 0x20)
+
+#define TUSB_DIDR1_LO				(TUSB_SYS_REG_BASE + 0x1f8)
+#define TUSB_DIDR1_HI				(TUSB_SYS_REG_BASE + 0x1fc)
+#define		TUSB_DIDR1_HI_CHIP_REV(v)		(((v) >> 17) & 0xf)
+#define			TUSB_DIDR1_HI_REV_20		0
+#define			TUSB_DIDR1_HI_REV_30		1
+#define			TUSB_DIDR1_HI_REV_31		2
+
+#define TUSB_REV_10	0x10
+#define TUSB_REV_20	0x20
+#define TUSB_REV_30	0x30
+#define TUSB_REV_31	0x31
+
+#endif /* __TUSB6010_H__ */
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
new file mode 100644
index 000000000..60a93b8bb
--- /dev/null
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -0,0 +1,642 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TUSB6010 USB 2.0 OTG Dual Role controller OMAP DMA interface
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/usb.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/dmaengine.h>
+
+#include "musb_core.h"
+#include "tusb6010.h"
+
+#define to_chdat(c)		((struct tusb_omap_dma_ch *)(c)->private_data)
+
+#define MAX_DMAREQ		5	/* REVISIT: Really 6, but req5 not OK */
+
+struct tusb_dma_data {
+	s8			dmareq;
+	struct dma_chan		*chan;
+};
+
+struct tusb_omap_dma_ch {
+	struct musb		*musb;
+	void __iomem		*tbase;
+	unsigned long		phys_offset;
+	int			epnum;
+	u8			tx;
+	struct musb_hw_ep	*hw_ep;
+
+	struct tusb_dma_data	*dma_data;
+
+	struct tusb_omap_dma	*tusb_dma;
+
+	dma_addr_t		dma_addr;
+
+	u32			len;
+	u16			packet_sz;
+	u16			transfer_packet_sz;
+	u32			transfer_len;
+	u32			completed_len;
+};
+
+struct tusb_omap_dma {
+	struct dma_controller		controller;
+	void __iomem			*tbase;
+
+	struct tusb_dma_data		dma_pool[MAX_DMAREQ];
+	unsigned			multichannel:1;
+};
+
+/*
+ * Allocate dmareq0 to the current channel unless it's already taken
+ */
+static inline int tusb_omap_use_shared_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+
+	if (reg != 0) {
+		dev_dbg(chdat->musb->controller, "ep%i dmareq0 is busy for ep%i\n",
+			chdat->epnum, reg & 0xf);
+		return -EAGAIN;
+	}
+
+	if (chdat->tx)
+		reg = (1 << 4) | chdat->epnum;
+	else
+		reg = chdat->epnum;
+
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+	return 0;
+}
+
+static inline void tusb_omap_free_shared_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+
+	if ((reg & 0xf) != chdat->epnum) {
+		printk(KERN_ERR "ep%i trying to release dmareq0 for ep%i\n",
+			chdat->epnum, reg & 0xf);
+		return;
+	}
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, 0);
+}
+
+/*
+ * See also musb_dma_completion in plat_uds.c and musb_g_[tx|rx]() in
+ * musb_gadget.c.
+ */
+static void tusb_omap_dma_cb(void *data)
+{
+	struct dma_channel	*channel = (struct dma_channel *)data;
+	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
+	struct tusb_omap_dma	*tusb_dma = chdat->tusb_dma;
+	struct musb		*musb = chdat->musb;
+	struct device		*dev = musb->controller;
+	struct musb_hw_ep	*hw_ep = chdat->hw_ep;
+	void __iomem		*ep_conf = hw_ep->conf;
+	void __iomem		*mbase = musb->mregs;
+	unsigned long		remaining, flags, pio;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	dev_dbg(musb->controller, "ep%i %s dma callback\n",
+		chdat->epnum, chdat->tx ? "tx" : "rx");
+
+	if (chdat->tx)
+		remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET);
+	else
+		remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET);
+
+	remaining = TUSB_EP_CONFIG_XFR_SIZE(remaining);
+
+	/* HW issue #10: XFR_SIZE may get corrupt on DMA (both async & sync) */
+	if (unlikely(remaining > chdat->transfer_len)) {
+		dev_dbg(musb->controller, "Corrupt %s XFR_SIZE: 0x%08lx\n",
+			chdat->tx ? "tx" : "rx", remaining);
+		remaining = 0;
+	}
+
+	channel->actual_len = chdat->transfer_len - remaining;
+	pio = chdat->len - channel->actual_len;
+
+	dev_dbg(musb->controller, "DMA remaining %lu/%u\n", remaining, chdat->transfer_len);
+
+	/* Transfer remaining 1 - 31 bytes */
+	if (pio > 0 && pio < 32) {
+		u8	*buf;
+
+		dev_dbg(musb->controller, "Using PIO for remaining %lu bytes\n", pio);
+		buf = phys_to_virt((u32)chdat->dma_addr) + chdat->transfer_len;
+		if (chdat->tx) {
+			dma_unmap_single(dev, chdat->dma_addr,
+						chdat->transfer_len,
+						DMA_TO_DEVICE);
+			musb_write_fifo(hw_ep, pio, buf);
+		} else {
+			dma_unmap_single(dev, chdat->dma_addr,
+						chdat->transfer_len,
+						DMA_FROM_DEVICE);
+			musb_read_fifo(hw_ep, pio, buf);
+		}
+		channel->actual_len += pio;
+	}
+
+	if (!tusb_dma->multichannel)
+		tusb_omap_free_shared_dmareq(chdat);
+
+	channel->status = MUSB_DMA_STATUS_FREE;
+
+	musb_dma_completion(musb, chdat->epnum, chdat->tx);
+
+	/* We must terminate short tx transfers manually by setting TXPKTRDY.
+	 * REVISIT: This same problem may occur with other MUSB dma as well.
+	 * Easy to test with g_ether by pinging the MUSB board with ping -s54.
+	 */
+	if ((chdat->transfer_len < chdat->packet_sz)
+			|| (chdat->transfer_len % chdat->packet_sz != 0)) {
+		u16	csr;
+
+		if (chdat->tx) {
+			dev_dbg(musb->controller, "terminating short tx packet\n");
+			musb_ep_select(mbase, chdat->epnum);
+			csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
+			csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY
+				| MUSB_TXCSR_P_WZC_BITS;
+			musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
+		}
+	}
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
+				u8 rndis_mode, dma_addr_t dma_addr, u32 len)
+{
+	struct tusb_omap_dma_ch		*chdat = to_chdat(channel);
+	struct tusb_omap_dma		*tusb_dma = chdat->tusb_dma;
+	struct musb			*musb = chdat->musb;
+	struct device			*dev = musb->controller;
+	struct musb_hw_ep		*hw_ep = chdat->hw_ep;
+	void __iomem			*mbase = musb->mregs;
+	void __iomem			*ep_conf = hw_ep->conf;
+	dma_addr_t			fifo_addr = hw_ep->fifo_sync;
+	u32				dma_remaining;
+	u16				csr;
+	u32				psize;
+	struct tusb_dma_data		*dma_data;
+	struct dma_async_tx_descriptor	*dma_desc;
+	struct dma_slave_config		dma_cfg;
+	enum dma_transfer_direction	dma_dir;
+	u32				port_window;
+	int				ret;
+
+	if (unlikely(dma_addr & 0x1) || (len < 32) || (len > packet_sz))
+		return false;
+
+	/*
+	 * HW issue #10: Async dma will eventually corrupt the XFR_SIZE
+	 * register which will cause missed DMA interrupt. We could try to
+	 * use a timer for the callback, but it is unsafe as the XFR_SIZE
+	 * register is corrupt, and we won't know if the DMA worked.
+	 */
+	if (dma_addr & 0x2)
+		return false;
+
+	/*
+	 * Because of HW issue #10, it seems like mixing sync DMA and async
+	 * PIO access can confuse the DMA. Make sure XFR_SIZE is reset before
+	 * using the channel for DMA.
+	 */
+	if (chdat->tx)
+		dma_remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET);
+	else
+		dma_remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET);
+
+	dma_remaining = TUSB_EP_CONFIG_XFR_SIZE(dma_remaining);
+	if (dma_remaining) {
+		dev_dbg(musb->controller, "Busy %s dma, not using: %08x\n",
+			chdat->tx ? "tx" : "rx", dma_remaining);
+		return false;
+	}
+
+	chdat->transfer_len = len & ~0x1f;
+
+	if (len < packet_sz)
+		chdat->transfer_packet_sz = chdat->transfer_len;
+	else
+		chdat->transfer_packet_sz = packet_sz;
+
+	dma_data = chdat->dma_data;
+	if (!tusb_dma->multichannel) {
+		if (tusb_omap_use_shared_dmareq(chdat) != 0) {
+			dev_dbg(musb->controller, "could not get dma for ep%i\n", chdat->epnum);
+			return false;
+		}
+		if (dma_data->dmareq < 0) {
+			/* REVISIT: This should get blocked earlier, happens
+			 * with MSC ErrorRecoveryTest
+			 */
+			WARN_ON(1);
+			return false;
+		}
+	}
+
+	chdat->packet_sz = packet_sz;
+	chdat->len = len;
+	channel->actual_len = 0;
+	chdat->dma_addr = dma_addr;
+	channel->status = MUSB_DMA_STATUS_BUSY;
+
+	/* Since we're recycling dma areas, we need to clean or invalidate */
+	if (chdat->tx) {
+		dma_dir = DMA_MEM_TO_DEV;
+		dma_map_single(dev, phys_to_virt(dma_addr), len,
+				DMA_TO_DEVICE);
+	} else {
+		dma_dir = DMA_DEV_TO_MEM;
+		dma_map_single(dev, phys_to_virt(dma_addr), len,
+				DMA_FROM_DEVICE);
+	}
+
+	memset(&dma_cfg, 0, sizeof(dma_cfg));
+
+	/* Use 16-bit transfer if dma_addr is not 32-bit aligned */
+	if ((dma_addr & 0x3) == 0) {
+		dma_cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+		dma_cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+		port_window = 8;
+	} else {
+		dma_cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+		dma_cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+		port_window = 16;
+
+		fifo_addr = hw_ep->fifo_async;
+	}
+
+	dev_dbg(musb->controller,
+		"ep%i %s dma: %pad len: %u(%u) packet_sz: %i(%i)\n",
+		chdat->epnum, chdat->tx ? "tx" : "rx", &dma_addr,
+		chdat->transfer_len, len, chdat->transfer_packet_sz, packet_sz);
+
+	dma_cfg.src_addr = fifo_addr;
+	dma_cfg.dst_addr = fifo_addr;
+	dma_cfg.src_port_window_size = port_window;
+	dma_cfg.src_maxburst = port_window;
+	dma_cfg.dst_port_window_size = port_window;
+	dma_cfg.dst_maxburst = port_window;
+
+	ret = dmaengine_slave_config(dma_data->chan, &dma_cfg);
+	if (ret) {
+		dev_err(musb->controller, "DMA slave config failed: %d\n", ret);
+		return false;
+	}
+
+	dma_desc = dmaengine_prep_slave_single(dma_data->chan, dma_addr,
+					chdat->transfer_len, dma_dir,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!dma_desc) {
+		dev_err(musb->controller, "DMA prep_slave_single failed\n");
+		return false;
+	}
+
+	dma_desc->callback = tusb_omap_dma_cb;
+	dma_desc->callback_param = channel;
+	dmaengine_submit(dma_desc);
+
+	dev_dbg(musb->controller,
+		"ep%i %s using %i-bit %s dma from %pad to %pad\n",
+		chdat->epnum, chdat->tx ? "tx" : "rx",
+		dma_cfg.src_addr_width * 8,
+		((dma_addr & 0x3) == 0) ? "sync" : "async",
+		(dma_dir == DMA_MEM_TO_DEV) ? &dma_addr : &fifo_addr,
+		(dma_dir == DMA_MEM_TO_DEV) ? &fifo_addr : &dma_addr);
+
+	/*
+	 * Prepare MUSB for DMA transfer
+	 */
+	musb_ep_select(mbase, chdat->epnum);
+	if (chdat->tx) {
+		csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
+		csr |= (MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB
+			| MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+		csr &= ~MUSB_TXCSR_P_UNDERRUN;
+		musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
+	} else {
+		csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_DMAENAB;
+		csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAMODE);
+		musb_writew(hw_ep->regs, MUSB_RXCSR,
+			csr | MUSB_RXCSR_P_WZC_BITS);
+	}
+
+	/* Start DMA transfer */
+	dma_async_issue_pending(dma_data->chan);
+
+	if (chdat->tx) {
+		/* Send transfer_packet_sz packets at a time */
+		psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+		psize &= ~0x7ff;
+		psize |= chdat->transfer_packet_sz;
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
+
+		musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
+	} else {
+		/* Receive transfer_packet_sz packets at a time */
+		psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+		psize &= ~(0x7ff << 16);
+		psize |= (chdat->transfer_packet_sz << 16);
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
+
+		musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
+	}
+
+	return true;
+}
+
+static int tusb_omap_dma_abort(struct dma_channel *channel)
+{
+	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
+
+	if (chdat->dma_data)
+		dmaengine_terminate_all(chdat->dma_data->chan);
+
+	channel->status = MUSB_DMA_STATUS_FREE;
+
+	return 0;
+}
+
+static inline int tusb_omap_dma_allocate_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+	int		i, dmareq_nr = -1;
+
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		int cur = (reg & (0xf << (i * 5))) >> (i * 5);
+		if (cur == 0) {
+			dmareq_nr = i;
+			break;
+		}
+	}
+
+	if (dmareq_nr == -1)
+		return -EAGAIN;
+
+	reg |= (chdat->epnum << (dmareq_nr * 5));
+	if (chdat->tx)
+		reg |= ((1 << 4) << (dmareq_nr * 5));
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+	chdat->dma_data = &chdat->tusb_dma->dma_pool[dmareq_nr];
+
+	return 0;
+}
+
+static inline void tusb_omap_dma_free_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32 reg;
+
+	if (!chdat || !chdat->dma_data || chdat->dma_data->dmareq < 0)
+		return;
+
+	reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+	reg &= ~(0x1f << (chdat->dma_data->dmareq * 5));
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+	chdat->dma_data = NULL;
+}
+
+static struct dma_channel *dma_channel_pool[MAX_DMAREQ];
+
+static struct dma_channel *
+tusb_omap_dma_allocate(struct dma_controller *c,
+		struct musb_hw_ep *hw_ep,
+		u8 tx)
+{
+	int ret, i;
+	struct tusb_omap_dma	*tusb_dma;
+	struct musb		*musb;
+	struct dma_channel	*channel = NULL;
+	struct tusb_omap_dma_ch	*chdat = NULL;
+	struct tusb_dma_data	*dma_data = NULL;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+	musb = tusb_dma->controller.musb;
+
+	/* REVISIT: Why does dmareq5 not work? */
+	if (hw_ep->epnum == 0) {
+		dev_dbg(musb->controller, "Not allowing DMA for ep0 %s\n", tx ? "tx" : "rx");
+		return NULL;
+	}
+
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		struct dma_channel *ch = dma_channel_pool[i];
+		if (ch->status == MUSB_DMA_STATUS_UNKNOWN) {
+			ch->status = MUSB_DMA_STATUS_FREE;
+			channel = ch;
+			chdat = ch->private_data;
+			break;
+		}
+	}
+
+	if (!channel)
+		return NULL;
+
+	chdat->musb = tusb_dma->controller.musb;
+	chdat->tbase = tusb_dma->tbase;
+	chdat->hw_ep = hw_ep;
+	chdat->epnum = hw_ep->epnum;
+	chdat->completed_len = 0;
+	chdat->tusb_dma = tusb_dma;
+	if (tx)
+		chdat->tx = 1;
+	else
+		chdat->tx = 0;
+
+	channel->max_len = 0x7fffffff;
+	channel->desired_mode = 0;
+	channel->actual_len = 0;
+
+	if (!chdat->dma_data) {
+		if (tusb_dma->multichannel) {
+			ret = tusb_omap_dma_allocate_dmareq(chdat);
+			if (ret != 0)
+				goto free_dmareq;
+		} else {
+			chdat->dma_data = &tusb_dma->dma_pool[0];
+		}
+	}
+
+	dma_data = chdat->dma_data;
+
+	dev_dbg(musb->controller, "ep%i %s dma: %s dmareq%i\n",
+		chdat->epnum,
+		chdat->tx ? "tx" : "rx",
+		tusb_dma->multichannel ? "shared" : "dedicated",
+		dma_data->dmareq);
+
+	return channel;
+
+free_dmareq:
+	tusb_omap_dma_free_dmareq(chdat);
+
+	dev_dbg(musb->controller, "ep%i: Could not get a DMA channel\n", chdat->epnum);
+	channel->status = MUSB_DMA_STATUS_UNKNOWN;
+
+	return NULL;
+}
+
+static void tusb_omap_dma_release(struct dma_channel *channel)
+{
+	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
+	struct musb		*musb = chdat->musb;
+
+	dev_dbg(musb->controller, "Release for ep%i\n", chdat->epnum);
+
+	channel->status = MUSB_DMA_STATUS_UNKNOWN;
+
+	dmaengine_terminate_sync(chdat->dma_data->chan);
+	tusb_omap_dma_free_dmareq(chdat);
+
+	channel = NULL;
+}
+
+void tusb_dma_controller_destroy(struct dma_controller *c)
+{
+	struct tusb_omap_dma	*tusb_dma;
+	int			i;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		struct dma_channel *ch = dma_channel_pool[i];
+		if (ch) {
+			kfree(ch->private_data);
+			kfree(ch);
+		}
+
+		/* Free up the DMA channels */
+		if (tusb_dma && tusb_dma->dma_pool[i].chan)
+			dma_release_channel(tusb_dma->dma_pool[i].chan);
+	}
+
+	kfree(tusb_dma);
+}
+EXPORT_SYMBOL_GPL(tusb_dma_controller_destroy);
+
+static int tusb_omap_allocate_dma_pool(struct tusb_omap_dma *tusb_dma)
+{
+	struct musb *musb = tusb_dma->controller.musb;
+	int i;
+	int ret = 0;
+
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		struct tusb_dma_data *dma_data = &tusb_dma->dma_pool[i];
+
+		/*
+		 * Request DMA channels:
+		 * - one channel in case of non multichannel mode
+		 * - MAX_DMAREQ number of channels in multichannel mode
+		 */
+		if (i == 0 || tusb_dma->multichannel) {
+			char ch_name[8];
+
+			sprintf(ch_name, "dmareq%d", i);
+			dma_data->chan = dma_request_chan(musb->controller,
+							  ch_name);
+			if (IS_ERR(dma_data->chan)) {
+				dev_err(musb->controller,
+					"Failed to request %s\n", ch_name);
+				ret = PTR_ERR(dma_data->chan);
+				goto dma_error;
+			}
+
+			dma_data->dmareq = i;
+		} else {
+			dma_data->dmareq = -1;
+		}
+	}
+
+	return 0;
+
+dma_error:
+	for (; i >= 0; i--) {
+		struct tusb_dma_data *dma_data = &tusb_dma->dma_pool[i];
+
+		if (dma_data->dmareq >= 0)
+			dma_release_channel(dma_data->chan);
+	}
+
+	return ret;
+}
+
+struct dma_controller *
+tusb_dma_controller_create(struct musb *musb, void __iomem *base)
+{
+	void __iomem		*tbase = musb->ctrl_base;
+	struct tusb_omap_dma	*tusb_dma;
+	int			i;
+
+	/* REVISIT: Get dmareq lines used from board-*.c */
+
+	musb_writel(musb->ctrl_base, TUSB_DMA_INT_MASK, 0x7fffffff);
+	musb_writel(musb->ctrl_base, TUSB_DMA_EP_MAP, 0);
+
+	musb_writel(tbase, TUSB_DMA_REQ_CONF,
+		TUSB_DMA_REQ_CONF_BURST_SIZE(2)
+		| TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f)
+		| TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2));
+
+	tusb_dma = kzalloc(sizeof(struct tusb_omap_dma), GFP_KERNEL);
+	if (!tusb_dma)
+		goto out;
+
+	tusb_dma->controller.musb = musb;
+	tusb_dma->tbase = musb->ctrl_base;
+
+	tusb_dma->controller.channel_alloc = tusb_omap_dma_allocate;
+	tusb_dma->controller.channel_release = tusb_omap_dma_release;
+	tusb_dma->controller.channel_program = tusb_omap_dma_program;
+	tusb_dma->controller.channel_abort = tusb_omap_dma_abort;
+
+	if (musb->tusb_revision >= TUSB_REV_30)
+		tusb_dma->multichannel = 1;
+
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		struct dma_channel	*ch;
+		struct tusb_omap_dma_ch	*chdat;
+
+		ch = kzalloc(sizeof(struct dma_channel), GFP_KERNEL);
+		if (!ch)
+			goto cleanup;
+
+		dma_channel_pool[i] = ch;
+
+		chdat = kzalloc(sizeof(struct tusb_omap_dma_ch), GFP_KERNEL);
+		if (!chdat)
+			goto cleanup;
+
+		ch->status = MUSB_DMA_STATUS_UNKNOWN;
+		ch->private_data = chdat;
+	}
+
+	if (tusb_omap_allocate_dma_pool(tusb_dma))
+		goto cleanup;
+
+	return &tusb_dma->controller;
+
+cleanup:
+	musb_dma_controller_destroy(&tusb_dma->controller);
+out:
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(tusb_dma_controller_create);
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
new file mode 100644
index 000000000..8ea62c344
--- /dev/null
+++ b/drivers/usb/musb/ux500.c
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2010 ST-Ericsson AB
+ * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ *
+ * Based on omap2430.c
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/usb/musb-ux500.h>
+
+#include "musb_core.h"
+
+static const struct musb_hdrc_config ux500_musb_hdrc_config = {
+	.multipoint	= true,
+	.dyn_fifo	= true,
+	.num_eps	= 16,
+	.ram_bits	= 16,
+};
+
+struct ux500_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct clk		*clk;
+};
+#define glue_to_musb(g)	platform_get_drvdata(g->musb)
+
+static void ux500_musb_set_vbus(struct musb *musb, int is_on)
+{
+	u8            devctl;
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+	/* HDRC controls CPEN, but beware current surges during device
+	 * connect.  They can trigger transient overcurrent conditions
+	 * that must be ignored.
+	 */
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	if (is_on) {
+		if (musb->xceiv->otg->state == OTG_STATE_A_IDLE) {
+			/* start the session */
+			devctl |= MUSB_DEVCTL_SESSION;
+			musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+			/*
+			 * Wait for the musb to set as A device to enable the
+			 * VBUS
+			 */
+			while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
+
+				if (time_after(jiffies, timeout)) {
+					dev_err(musb->controller,
+					"configured as A device timeout");
+					break;
+				}
+			}
+
+		} else {
+			musb->is_active = 1;
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+			devctl |= MUSB_DEVCTL_SESSION;
+			MUSB_HST_MODE(musb);
+		}
+	} else {
+		musb->is_active = 0;
+
+		/* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and jumping
+		 * right to B_IDLE...
+		 */
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		MUSB_DEV_MODE(musb);
+	}
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	/*
+	 * Devctl values will be updated after vbus goes below
+	 * session_valid. The time taken depends on the capacitance
+	 * on VBUS line. The max discharge time can be upto 1 sec
+	 * as per the spec. Typically on our platform, it is 200ms
+	 */
+	if (!is_on)
+		mdelay(200);
+
+	dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
+		usb_otg_state_string(musb->xceiv->otg->state),
+		musb_readb(musb->mregs, MUSB_DEVCTL));
+}
+
+static int musb_otg_notifications(struct notifier_block *nb,
+		unsigned long event, void *unused)
+{
+	struct musb *musb = container_of(nb, struct musb, nb);
+
+	dev_dbg(musb->controller, "musb_otg_notifications %ld %s\n",
+			event, usb_otg_state_string(musb->xceiv->otg->state));
+
+	switch (event) {
+	case UX500_MUSB_ID:
+		dev_dbg(musb->controller, "ID GND\n");
+		ux500_musb_set_vbus(musb, 1);
+		break;
+	case UX500_MUSB_VBUS:
+		dev_dbg(musb->controller, "VBUS Connect\n");
+		break;
+	case UX500_MUSB_NONE:
+		dev_dbg(musb->controller, "VBUS Disconnect\n");
+		if (is_host_active(musb))
+			ux500_musb_set_vbus(musb, 0);
+		else
+			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+		break;
+	default:
+		dev_dbg(musb->controller, "ID float\n");
+		return NOTIFY_DONE;
+	}
+	return NOTIFY_OK;
+}
+
+static irqreturn_t ux500_musb_interrupt(int irq, void *__hci)
+{
+	unsigned long   flags;
+	irqreturn_t     retval = IRQ_NONE;
+	struct musb     *musb = __hci;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+	if (musb->int_usb || musb->int_tx || musb->int_rx)
+		retval = musb_interrupt(musb);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return retval;
+}
+
+static int ux500_musb_init(struct musb *musb)
+{
+	int status;
+
+	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
+		pr_err("HS USB OTG: no transceiver configured\n");
+		return -EPROBE_DEFER;
+	}
+
+	musb->nb.notifier_call = musb_otg_notifications;
+	status = usb_register_notifier(musb->xceiv, &musb->nb);
+	if (status < 0) {
+		dev_dbg(musb->controller, "notification register failed\n");
+		return status;
+	}
+
+	musb->isr = ux500_musb_interrupt;
+
+	return 0;
+}
+
+static int ux500_musb_exit(struct musb *musb)
+{
+	usb_unregister_notifier(musb->xceiv, &musb->nb);
+
+	usb_put_phy(musb->xceiv);
+
+	return 0;
+}
+
+static const struct musb_platform_ops ux500_ops = {
+	.quirks		= MUSB_DMA_UX500 | MUSB_INDEXED_EP,
+#ifdef CONFIG_USB_UX500_DMA
+	.dma_init	= ux500_dma_controller_create,
+	.dma_exit	= ux500_dma_controller_destroy,
+#endif
+	.init		= ux500_musb_init,
+	.exit		= ux500_musb_exit,
+	.fifo_mode	= 5,
+
+	.set_vbus	= ux500_musb_set_vbus,
+};
+
+static struct musb_hdrc_platform_data *
+ux500_of_probe(struct platform_device *pdev, struct device_node *np)
+{
+	struct musb_hdrc_platform_data *pdata;
+	const char *mode;
+	int strlen;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	mode = of_get_property(np, "dr_mode", &strlen);
+	if (!mode) {
+		dev_err(&pdev->dev, "No 'dr_mode' property found\n");
+		return NULL;
+	}
+
+	if (strlen > 0) {
+		if (!strcmp(mode, "host"))
+			pdata->mode = MUSB_HOST;
+		if (!strcmp(mode, "otg"))
+			pdata->mode = MUSB_OTG;
+		if (!strcmp(mode, "peripheral"))
+			pdata->mode = MUSB_PERIPHERAL;
+	}
+
+	return pdata;
+}
+
+static int ux500_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
+	struct device_node		*np = pdev->dev.of_node;
+	struct platform_device		*musb;
+	struct ux500_glue		*glue;
+	struct clk			*clk;
+	int				ret = -ENOMEM;
+
+	if (!pdata) {
+		if (np) {
+			pdata = ux500_of_probe(pdev, np);
+			if (!pdata)
+				goto err0;
+
+			pdev->dev.platform_data = pdata;
+		} else {
+			dev_err(&pdev->dev, "no pdata or device tree found\n");
+			goto err0;
+		}
+	}
+
+	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		goto err0;
+
+	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err0;
+	}
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err1;
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err1;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &pdev->dev.coherent_dma_mask;
+	musb->dev.coherent_dma_mask	= pdev->dev.coherent_dma_mask;
+	device_set_of_node_from_dev(&musb->dev, &pdev->dev);
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->clk			= clk;
+
+	pdata->platform_ops		= &ux500_ops;
+	pdata->config 			= &ux500_musb_hdrc_config;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource, pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err2;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err2;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err2;
+	}
+
+	return 0;
+
+err2:
+	clk_disable_unprepare(clk);
+
+err1:
+	platform_device_put(musb);
+
+err0:
+	return ret;
+}
+
+static int ux500_remove(struct platform_device *pdev)
+{
+	struct ux500_glue	*glue = platform_get_drvdata(pdev);
+
+	platform_device_unregister(glue->musb);
+	clk_disable_unprepare(glue->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ux500_suspend(struct device *dev)
+{
+	struct ux500_glue	*glue = dev_get_drvdata(dev);
+	struct musb		*musb = glue_to_musb(glue);
+
+	if (musb)
+		usb_phy_set_suspend(musb->xceiv, 1);
+
+	clk_disable_unprepare(glue->clk);
+
+	return 0;
+}
+
+static int ux500_resume(struct device *dev)
+{
+	struct ux500_glue	*glue = dev_get_drvdata(dev);
+	struct musb		*musb = glue_to_musb(glue);
+	int			ret;
+
+	ret = clk_prepare_enable(glue->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable clock\n");
+		return ret;
+	}
+
+	if (musb)
+		usb_phy_set_suspend(musb->xceiv, 0);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ux500_pm_ops, ux500_suspend, ux500_resume);
+
+static const struct of_device_id ux500_match[] = {
+        { .compatible = "stericsson,db8500-musb", },
+        {}
+};
+
+MODULE_DEVICE_TABLE(of, ux500_match);
+
+static struct platform_driver ux500_driver = {
+	.probe		= ux500_probe,
+	.remove		= ux500_remove,
+	.driver		= {
+		.name	= "musb-ux500",
+		.pm	= &ux500_pm_ops,
+		.of_match_table = ux500_match,
+	},
+};
+
+MODULE_DESCRIPTION("UX500 MUSB Glue Layer");
+MODULE_AUTHOR("Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>");
+MODULE_LICENSE("GPL v2");
+module_platform_driver(ux500_driver);
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
new file mode 100644
index 000000000..d5cf5e8bb
--- /dev/null
+++ b/drivers/usb/musb/ux500_dma.c
@@ -0,0 +1,396 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * drivers/usb/musb/ux500_dma.c
+ *
+ * U8500 DMA support code
+ *
+ * Copyright (C) 2009 STMicroelectronics
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Authors:
+ *	Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ *	Praveena Nadahally <praveen.nadahally@stericsson.com>
+ *	Rajaram Regupathy <ragupathy.rajaram@stericsson.com>
+ */
+
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/pfn.h>
+#include <linux/sizes.h>
+#include <linux/platform_data/usb-musb-ux500.h>
+#include "musb_core.h"
+
+static const char *iep_chan_names[] = { "iep_1_9", "iep_2_10", "iep_3_11", "iep_4_12",
+					"iep_5_13", "iep_6_14", "iep_7_15", "iep_8" };
+static const char *oep_chan_names[] = { "oep_1_9", "oep_2_10", "oep_3_11", "oep_4_12",
+					"oep_5_13", "oep_6_14", "oep_7_15", "oep_8" };
+
+struct ux500_dma_channel {
+	struct dma_channel channel;
+	struct ux500_dma_controller *controller;
+	struct musb_hw_ep *hw_ep;
+	struct dma_chan *dma_chan;
+	unsigned int cur_len;
+	dma_cookie_t cookie;
+	u8 ch_num;
+	u8 is_tx;
+	u8 is_allocated;
+};
+
+struct ux500_dma_controller {
+	struct dma_controller controller;
+	struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS];
+	struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS];
+	void *private_data;
+	dma_addr_t phy_base;
+};
+
+/* Work function invoked from DMA callback to handle rx transfers. */
+static void ux500_dma_callback(void *private_data)
+{
+	struct dma_channel *channel = private_data;
+	struct ux500_dma_channel *ux500_channel = channel->private_data;
+	struct musb_hw_ep       *hw_ep = ux500_channel->hw_ep;
+	struct musb *musb = hw_ep->musb;
+	unsigned long flags;
+
+	dev_dbg(musb->controller, "DMA rx transfer done on hw_ep=%d\n",
+		hw_ep->epnum);
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ux500_channel->channel.actual_len = ux500_channel->cur_len;
+	ux500_channel->channel.status = MUSB_DMA_STATUS_FREE;
+	musb_dma_completion(musb, hw_ep->epnum, ux500_channel->is_tx);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+}
+
+static bool ux500_configure_channel(struct dma_channel *channel,
+				u16 packet_sz, u8 mode,
+				dma_addr_t dma_addr, u32 len)
+{
+	struct ux500_dma_channel *ux500_channel = channel->private_data;
+	struct musb_hw_ep *hw_ep = ux500_channel->hw_ep;
+	struct dma_chan *dma_chan = ux500_channel->dma_chan;
+	struct dma_async_tx_descriptor *dma_desc;
+	enum dma_transfer_direction direction;
+	struct scatterlist sg;
+	struct dma_slave_config slave_conf;
+	enum dma_slave_buswidth addr_width;
+	struct musb *musb = ux500_channel->controller->private_data;
+	dma_addr_t usb_fifo_addr = (musb->io.fifo_offset(hw_ep->epnum) +
+					ux500_channel->controller->phy_base);
+
+	dev_dbg(musb->controller,
+		"packet_sz=%d, mode=%d, dma_addr=0x%llx, len=%d is_tx=%d\n",
+		packet_sz, mode, (unsigned long long) dma_addr,
+		len, ux500_channel->is_tx);
+
+	ux500_channel->cur_len = len;
+
+	sg_init_table(&sg, 1);
+	sg_set_page(&sg, pfn_to_page(PFN_DOWN(dma_addr)), len,
+					    offset_in_page(dma_addr));
+	sg_dma_address(&sg) = dma_addr;
+	sg_dma_len(&sg) = len;
+
+	direction = ux500_channel->is_tx ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
+	addr_width = (len & 0x3) ? DMA_SLAVE_BUSWIDTH_1_BYTE :
+					DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+	slave_conf.direction = direction;
+	slave_conf.src_addr = usb_fifo_addr;
+	slave_conf.src_addr_width = addr_width;
+	slave_conf.src_maxburst = 16;
+	slave_conf.dst_addr = usb_fifo_addr;
+	slave_conf.dst_addr_width = addr_width;
+	slave_conf.dst_maxburst = 16;
+	slave_conf.device_fc = false;
+
+	dmaengine_slave_config(dma_chan, &slave_conf);
+
+	dma_desc = dmaengine_prep_slave_sg(dma_chan, &sg, 1, direction,
+					     DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!dma_desc)
+		return false;
+
+	dma_desc->callback = ux500_dma_callback;
+	dma_desc->callback_param = channel;
+	ux500_channel->cookie = dma_desc->tx_submit(dma_desc);
+
+	dma_async_issue_pending(dma_chan);
+
+	return true;
+}
+
+static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c,
+				struct musb_hw_ep *hw_ep, u8 is_tx)
+{
+	struct ux500_dma_controller *controller = container_of(c,
+			struct ux500_dma_controller, controller);
+	struct ux500_dma_channel *ux500_channel = NULL;
+	struct musb *musb = controller->private_data;
+	u8 ch_num = hw_ep->epnum - 1;
+
+	/* 8 DMA channels (0 - 7). Each DMA channel can only be allocated
+	 * to specified hw_ep. For example DMA channel 0 can only be allocated
+	 * to hw_ep 1 and 9.
+	 */
+	if (ch_num > 7)
+		ch_num -= 8;
+
+	if (ch_num >= UX500_MUSB_DMA_NUM_RX_TX_CHANNELS)
+		return NULL;
+
+	ux500_channel = is_tx ? &(controller->tx_channel[ch_num]) :
+				&(controller->rx_channel[ch_num]) ;
+
+	/* Check if channel is already used. */
+	if (ux500_channel->is_allocated)
+		return NULL;
+
+	ux500_channel->hw_ep = hw_ep;
+	ux500_channel->is_allocated = 1;
+
+	dev_dbg(musb->controller, "hw_ep=%d, is_tx=0x%x, channel=%d\n",
+		hw_ep->epnum, is_tx, ch_num);
+
+	return &(ux500_channel->channel);
+}
+
+static void ux500_dma_channel_release(struct dma_channel *channel)
+{
+	struct ux500_dma_channel *ux500_channel = channel->private_data;
+	struct musb *musb = ux500_channel->controller->private_data;
+
+	dev_dbg(musb->controller, "channel=%d\n", ux500_channel->ch_num);
+
+	if (ux500_channel->is_allocated) {
+		ux500_channel->is_allocated = 0;
+		channel->status = MUSB_DMA_STATUS_FREE;
+		channel->actual_len = 0;
+	}
+}
+
+static int ux500_dma_is_compatible(struct dma_channel *channel,
+		u16 maxpacket, void *buf, u32 length)
+{
+	if ((maxpacket & 0x3)		||
+		((unsigned long int) buf & 0x3)	||
+		(length < 512)		||
+		(length & 0x3))
+		return false;
+	else
+		return true;
+}
+
+static int ux500_dma_channel_program(struct dma_channel *channel,
+				u16 packet_sz, u8 mode,
+				dma_addr_t dma_addr, u32 len)
+{
+	int ret;
+
+	BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
+		channel->status == MUSB_DMA_STATUS_BUSY);
+
+	channel->status = MUSB_DMA_STATUS_BUSY;
+	channel->actual_len = 0;
+	ret = ux500_configure_channel(channel, packet_sz, mode, dma_addr, len);
+	if (!ret)
+		channel->status = MUSB_DMA_STATUS_FREE;
+
+	return ret;
+}
+
+static int ux500_dma_channel_abort(struct dma_channel *channel)
+{
+	struct ux500_dma_channel *ux500_channel = channel->private_data;
+	struct ux500_dma_controller *controller = ux500_channel->controller;
+	struct musb *musb = controller->private_data;
+	void __iomem *epio = musb->endpoints[ux500_channel->hw_ep->epnum].regs;
+	u16 csr;
+
+	dev_dbg(musb->controller, "channel=%d, is_tx=%d\n",
+		ux500_channel->ch_num, ux500_channel->is_tx);
+
+	if (channel->status == MUSB_DMA_STATUS_BUSY) {
+		if (ux500_channel->is_tx) {
+			csr = musb_readw(epio, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_AUTOSET |
+				 MUSB_TXCSR_DMAENAB |
+				 MUSB_TXCSR_DMAMODE);
+			musb_writew(epio, MUSB_TXCSR, csr);
+		} else {
+			csr = musb_readw(epio, MUSB_RXCSR);
+			csr &= ~(MUSB_RXCSR_AUTOCLEAR |
+				 MUSB_RXCSR_DMAENAB |
+				 MUSB_RXCSR_DMAMODE);
+			musb_writew(epio, MUSB_RXCSR, csr);
+		}
+
+		dmaengine_terminate_all(ux500_channel->dma_chan);
+		channel->status = MUSB_DMA_STATUS_FREE;
+	}
+	return 0;
+}
+
+static void ux500_dma_controller_stop(struct ux500_dma_controller *controller)
+{
+	struct ux500_dma_channel *ux500_channel;
+	struct dma_channel *channel;
+	u8 ch_num;
+
+	for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) {
+		channel = &controller->rx_channel[ch_num].channel;
+		ux500_channel = channel->private_data;
+
+		ux500_dma_channel_release(channel);
+
+		if (ux500_channel->dma_chan)
+			dma_release_channel(ux500_channel->dma_chan);
+	}
+
+	for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) {
+		channel = &controller->tx_channel[ch_num].channel;
+		ux500_channel = channel->private_data;
+
+		ux500_dma_channel_release(channel);
+
+		if (ux500_channel->dma_chan)
+			dma_release_channel(ux500_channel->dma_chan);
+	}
+}
+
+static int ux500_dma_controller_start(struct ux500_dma_controller *controller)
+{
+	struct ux500_dma_channel *ux500_channel = NULL;
+	struct musb *musb = controller->private_data;
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
+	struct ux500_musb_board_data *data;
+	struct dma_channel *dma_channel = NULL;
+	char **chan_names;
+	u32 ch_num;
+	u8 dir;
+	u8 is_tx = 0;
+
+	void **param_array;
+	struct ux500_dma_channel *channel_array;
+	dma_cap_mask_t mask;
+
+	if (!plat) {
+		dev_err(musb->controller, "No platform data\n");
+		return -EINVAL;
+	}
+
+	data = plat->board_data;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	/* Prepare the loop for RX channels */
+	channel_array = controller->rx_channel;
+	param_array = data ? data->dma_rx_param_array : NULL;
+	chan_names = (char **)iep_chan_names;
+
+	for (dir = 0; dir < 2; dir++) {
+		for (ch_num = 0;
+		     ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS;
+		     ch_num++) {
+			ux500_channel = &channel_array[ch_num];
+			ux500_channel->controller = controller;
+			ux500_channel->ch_num = ch_num;
+			ux500_channel->is_tx = is_tx;
+
+			dma_channel = &(ux500_channel->channel);
+			dma_channel->private_data = ux500_channel;
+			dma_channel->status = MUSB_DMA_STATUS_FREE;
+			dma_channel->max_len = SZ_16M;
+
+			ux500_channel->dma_chan =
+				dma_request_chan(dev, chan_names[ch_num]);
+
+			if (IS_ERR(ux500_channel->dma_chan))
+				ux500_channel->dma_chan =
+					dma_request_channel(mask,
+							    data ?
+							    data->dma_filter :
+							    NULL,
+							    param_array ?
+							    param_array[ch_num] :
+							    NULL);
+
+			if (!ux500_channel->dma_chan) {
+				ERR("Dma pipe allocation error dir=%d ch=%d\n",
+					dir, ch_num);
+
+				/* Release already allocated channels */
+				ux500_dma_controller_stop(controller);
+
+				return -EBUSY;
+			}
+
+		}
+
+		/* Prepare the loop for TX channels */
+		channel_array = controller->tx_channel;
+		param_array = data ? data->dma_tx_param_array : NULL;
+		chan_names = (char **)oep_chan_names;
+		is_tx = 1;
+	}
+
+	return 0;
+}
+
+void ux500_dma_controller_destroy(struct dma_controller *c)
+{
+	struct ux500_dma_controller *controller = container_of(c,
+			struct ux500_dma_controller, controller);
+
+	ux500_dma_controller_stop(controller);
+	kfree(controller);
+}
+EXPORT_SYMBOL_GPL(ux500_dma_controller_destroy);
+
+struct dma_controller *
+ux500_dma_controller_create(struct musb *musb, void __iomem *base)
+{
+	struct ux500_dma_controller *controller;
+	struct platform_device *pdev = to_platform_device(musb->controller);
+	struct resource	*iomem;
+	int ret;
+
+	controller = kzalloc(sizeof(*controller), GFP_KERNEL);
+	if (!controller)
+		goto kzalloc_fail;
+
+	controller->private_data = musb;
+
+	/* Save physical address for DMA controller. */
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		dev_err(musb->controller, "no memory resource defined\n");
+		goto plat_get_fail;
+	}
+
+	controller->phy_base = (dma_addr_t) iomem->start;
+
+	controller->controller.channel_alloc = ux500_dma_channel_allocate;
+	controller->controller.channel_release = ux500_dma_channel_release;
+	controller->controller.channel_program = ux500_dma_channel_program;
+	controller->controller.channel_abort = ux500_dma_channel_abort;
+	controller->controller.is_compatible = ux500_dma_is_compatible;
+
+	ret = ux500_dma_controller_start(controller);
+	if (ret)
+		goto plat_get_fail;
+	return &controller->controller;
+
+plat_get_fail:
+	kfree(controller);
+kzalloc_fail:
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(ux500_dma_controller_create);
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
new file mode 100644
index 000000000..2acbe41fb
--- /dev/null
+++ b/drivers/usb/phy/Kconfig
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Physical Layer USB driver configuration
+#
+menu "USB Physical Layer drivers"
+
+config USB_PHY
+	select EXTCON
+	def_bool n
+
+#
+# USB Transceiver Drivers
+#
+config AB8500_USB
+	tristate "AB8500 USB Transceiver Driver"
+	depends on AB8500_CORE
+	select USB_PHY
+	help
+	  Enable this to support the USB OTG transceiver in AB8500 chip.
+	  This transceiver supports high and full speed devices plus,
+	  in host mode, low speed.
+
+config FSL_USB2_OTG
+	tristate "Freescale USB OTG Transceiver Driver"
+	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM=y && PM
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
+	select USB_PHY
+	help
+	  Enable this to support Freescale USB OTG transceiver.
+
+config ISP1301_OMAP
+	tristate "Philips ISP1301 with OMAP OTG"
+	depends on I2C
+	depends on ARCH_OMAP_OTG || (ARM && COMPILE_TEST)
+	depends on USB
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
+	select USB_PHY
+	help
+	  If you say yes here you get support for the Philips ISP1301
+	  USB-On-The-Go transceiver working with the OMAP OTG controller.
+	  The ISP1301 is a full speed USB  transceiver which is used in
+	  products including H2, H3, and H4 development boards for Texas
+	  Instruments OMAP processors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called phy-isp1301-omap.
+
+config KEYSTONE_USB_PHY
+	tristate "Keystone USB PHY Driver"
+	depends on ARCH_KEYSTONE || COMPILE_TEST
+	depends on NOP_USB_XCEIV
+	help
+	  Enable this to support Keystone USB phy. This driver provides
+	  interface to interact with USB 2.0 and USB 3.0 PHY that is part
+	  of the Keystone SOC.
+
+config NOP_USB_XCEIV
+	tristate "NOP USB Transceiver Driver"
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, NOP can't be built-in
+	select USB_PHY
+	help
+	  This driver is to be used by all the usb transceiver which are either
+	  built-in with usb ip or which are autonomous and doesn't require any
+	  phy programming such as ISP1x04 etc.
+
+config AM335X_CONTROL_USB
+	tristate
+
+config AM335X_PHY_USB
+	tristate "AM335x USB PHY Driver"
+	depends on ARM || COMPILE_TEST
+	depends on NOP_USB_XCEIV
+	select USB_PHY
+	select AM335X_CONTROL_USB
+	select USB_COMMON
+	help
+	  This driver provides PHY support for that phy which part for the
+	  AM335x SoC.
+
+config TWL6030_USB
+	tristate "TWL6030 USB Transceiver Driver"
+	depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
+	depends on OF
+	help
+	  Enable this to support the USB OTG transceiver on TWL6030
+	  family chips. This TWL6030 transceiver has the VBUS and ID GND
+	  and OTG SRP events capabilities. For all other transceiver functionality
+	  UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs
+	  are hooked to this driver through platform_data structure.
+	  The definition of internal PHY APIs are in the mach-omap2 layer.
+
+config USB_GPIO_VBUS
+	tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
+	depends on GPIOLIB || COMPILE_TEST
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
+	select USB_PHY
+	help
+	  Provides simple GPIO VBUS sensing for controllers with an
+	  internal transceiver via the usb_phy interface, and
+	  optionally control of a D+ pullup GPIO as well as a VBUS
+	  current limit regulator.
+
+config OMAP_OTG
+	tristate "OMAP USB OTG controller driver"
+	depends on ARCH_OMAP_OTG && EXTCON
+	help
+	  Enable this to support some transceivers on OMAP1 platforms. OTG
+	  controller is needed to switch between host and peripheral modes.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called phy-omap-otg.
+
+config TAHVO_USB
+	tristate "Tahvo USB transceiver driver"
+	depends on MFD_RETU
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
+	select USB_PHY
+	help
+	  Enable this to support USB transceiver on Tahvo. This is used
+	  at least on Nokia 770.
+
+config TAHVO_USB_HOST_BY_DEFAULT
+	depends on TAHVO_USB
+	bool "Device in USB host mode by default"
+	help
+	  Say Y here, if you want the device to enter USB host mode
+	  by default on bootup.
+
+config USB_ISP1301
+	tristate "NXP ISP1301 USB transceiver support"
+	depends on USB || USB_GADGET
+	depends on I2C
+	select USB_PHY
+	help
+	  Say Y here to add support for the NXP ISP1301 USB transceiver driver.
+	  This chip is typically used as USB transceiver for USB host, gadget
+	  and OTG drivers (to be selected separately).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called phy-isp1301.
+
+config USB_MV_OTG
+	tristate "Marvell USB OTG support"
+	depends on USB_EHCI_MV && USB_MV_UDC && PM && USB_OTG
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
+	select USB_PHY
+	help
+	  Say Y here if you want to build Marvell USB OTG transceiver
+	  driver in kernel (including PXA and MMP series). This driver
+	  implements role switch between EHCI host driver and gadget driver.
+
+	  To compile this driver as a module, choose M here.
+
+config USB_MXS_PHY
+	tristate "Freescale MXS USB PHY support"
+	depends on ARCH_MXC || ARCH_MXS
+	select STMP_DEVICE
+	select USB_PHY
+	help
+	  Enable this to support the Freescale MXS USB PHY.
+
+	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
+
+config USB_TEGRA_PHY
+	tristate "NVIDIA Tegra USB PHY Driver"
+	depends on ARCH_TEGRA || COMPILE_TEST
+	select USB_COMMON
+	select USB_PHY
+	select USB_ULPI
+	help
+	  This driver provides PHY support for the USB controllers found
+	  on NVIDIA Tegra SoC's.
+
+config USB_ULPI
+	bool "Generic ULPI Transceiver Driver"
+	depends on ARM || ARM64 || COMPILE_TEST
+	select USB_ULPI_VIEWPORT
+	help
+	  Enable this to support ULPI connected USB OTG transceivers which
+	  are likely found on embedded boards.
+
+config USB_ULPI_VIEWPORT
+	bool
+	help
+	  Provides read/write operations to the ULPI phy register set for
+	  controllers with a viewport register (e.g. Chipidea/ARC controllers).
+
+config JZ4770_PHY
+	tristate "Ingenic SoCs Transceiver Driver"
+	depends on MIPS || COMPILE_TEST
+	select USB_PHY
+	help
+	  This driver provides PHY support for the USB controller found
+	  on the JZ-series and X-series SoCs from Ingenic.
+
+endmenu
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
new file mode 100644
index 000000000..b352bdbe8
--- /dev/null
+++ b/drivers/usb/phy/Makefile
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for physical layer USB drivers
+#
+obj-$(CONFIG_USB_PHY)			+= phy.o
+obj-$(CONFIG_OF)			+= of.o
+
+# transceiver drivers, keep the list sorted
+
+obj-$(CONFIG_AB8500_USB)		+= phy-ab8500-usb.o
+obj-$(CONFIG_FSL_USB2_OTG)		+= phy-fsl-usb.o
+obj-$(CONFIG_ISP1301_OMAP)		+= phy-isp1301-omap.o
+obj-$(CONFIG_NOP_USB_XCEIV)		+= phy-generic.o
+obj-$(CONFIG_TAHVO_USB)			+= phy-tahvo.o
+obj-$(CONFIG_AM335X_CONTROL_USB)	+= phy-am335x-control.o
+obj-$(CONFIG_AM335X_PHY_USB)		+= phy-am335x.o
+obj-$(CONFIG_OMAP_OTG)			+= phy-omap-otg.o
+obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
+obj-$(CONFIG_USB_TEGRA_PHY)		+= phy-tegra-usb.o
+obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
+obj-$(CONFIG_USB_ISP1301)		+= phy-isp1301.o
+obj-$(CONFIG_USB_MV_OTG)		+= phy-mv-usb.o
+obj-$(CONFIG_USB_MXS_PHY)		+= phy-mxs-usb.o
+obj-$(CONFIG_USB_ULPI)			+= phy-ulpi.o
+obj-$(CONFIG_USB_ULPI_VIEWPORT)		+= phy-ulpi-viewport.o
+obj-$(CONFIG_KEYSTONE_USB_PHY)		+= phy-keystone.o
+obj-$(CONFIG_JZ4770_PHY)		+= phy-jz4770.o
diff --git a/drivers/usb/phy/of.c b/drivers/usb/phy/of.c
new file mode 100644
index 000000000..1ab134f45
--- /dev/null
+++ b/drivers/usb/phy/of.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * USB of helper code
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+
+static const char *const usbphy_modes[] = {
+	[USBPHY_INTERFACE_MODE_UNKNOWN]	= "",
+	[USBPHY_INTERFACE_MODE_UTMI]	= "utmi",
+	[USBPHY_INTERFACE_MODE_UTMIW]	= "utmi_wide",
+	[USBPHY_INTERFACE_MODE_ULPI]	= "ulpi",
+	[USBPHY_INTERFACE_MODE_SERIAL]	= "serial",
+	[USBPHY_INTERFACE_MODE_HSIC]	= "hsic",
+};
+
+/**
+ * of_usb_get_phy_mode - Get phy mode for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'phy_type',
+ * and returns the corresponding enum usb_phy_interface
+ */
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+	const char *phy_type;
+	int err, i;
+
+	err = of_property_read_string(np, "phy_type", &phy_type);
+	if (err < 0)
+		return USBPHY_INTERFACE_MODE_UNKNOWN;
+
+	for (i = 0; i < ARRAY_SIZE(usbphy_modes); i++)
+		if (!strcmp(phy_type, usbphy_modes[i]))
+			return i;
+
+	return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_phy_mode);
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
new file mode 100644
index 000000000..4c52ba96f
--- /dev/null
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -0,0 +1,1013 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * USB transceiver driver for AB8500 family chips
+ *
+ * Copyright (C) 2010-2013 ST-Ericsson AB
+ * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * Avinash Kumar <avinash.kumar@stericsson.com>
+ * Thirupathi Chippakurthy <thirupathi.chippakurthy@stericsson.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+#include <linux/slab.h>
+#include <linux/notifier.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/usb/musb-ux500.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pinctrl/consumer.h>
+
+/* Bank AB8500_SYS_CTRL2_BLOCK */
+#define AB8500_MAIN_WD_CTRL_REG 0x01
+
+/* Bank AB8500_USB */
+#define AB8500_USB_LINE_STAT_REG 0x80
+#define AB8505_USB_LINE_STAT_REG 0x94
+#define AB8500_USB_PHY_CTRL_REG 0x8A
+
+/* Bank AB8500_DEVELOPMENT */
+#define AB8500_BANK12_ACCESS 0x00
+
+/* Bank AB8500_DEBUG */
+#define AB8500_USB_PHY_TUNE1 0x05
+#define AB8500_USB_PHY_TUNE2 0x06
+#define AB8500_USB_PHY_TUNE3 0x07
+
+/* Bank AB8500_INTERRUPT */
+#define AB8500_IT_SOURCE2_REG 0x01
+
+#define AB8500_BIT_OTG_STAT_ID (1 << 0)
+#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0)
+#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1)
+#define AB8500_BIT_WD_CTRL_ENABLE (1 << 0)
+#define AB8500_BIT_WD_CTRL_KICK (1 << 1)
+#define AB8500_BIT_SOURCE2_VBUSDET (1 << 7)
+
+#define AB8500_WD_KICK_DELAY_US 100 /* usec */
+#define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */
+#define AB8500_V20_31952_DISABLE_DELAY_US 100 /* usec */
+
+/* Usb line status register */
+enum ab8500_usb_link_status {
+	USB_LINK_NOT_CONFIGURED_8500 = 0,
+	USB_LINK_STD_HOST_NC_8500,
+	USB_LINK_STD_HOST_C_NS_8500,
+	USB_LINK_STD_HOST_C_S_8500,
+	USB_LINK_HOST_CHG_NM_8500,
+	USB_LINK_HOST_CHG_HS_8500,
+	USB_LINK_HOST_CHG_HS_CHIRP_8500,
+	USB_LINK_DEDICATED_CHG_8500,
+	USB_LINK_ACA_RID_A_8500,
+	USB_LINK_ACA_RID_B_8500,
+	USB_LINK_ACA_RID_C_NM_8500,
+	USB_LINK_ACA_RID_C_HS_8500,
+	USB_LINK_ACA_RID_C_HS_CHIRP_8500,
+	USB_LINK_HM_IDGND_8500,
+	USB_LINK_RESERVED_8500,
+	USB_LINK_NOT_VALID_LINK_8500,
+};
+
+enum ab8505_usb_link_status {
+	USB_LINK_NOT_CONFIGURED_8505 = 0,
+	USB_LINK_STD_HOST_NC_8505,
+	USB_LINK_STD_HOST_C_NS_8505,
+	USB_LINK_STD_HOST_C_S_8505,
+	USB_LINK_CDP_8505,
+	USB_LINK_RESERVED0_8505,
+	USB_LINK_RESERVED1_8505,
+	USB_LINK_DEDICATED_CHG_8505,
+	USB_LINK_ACA_RID_A_8505,
+	USB_LINK_ACA_RID_B_8505,
+	USB_LINK_ACA_RID_C_NM_8505,
+	USB_LINK_RESERVED2_8505,
+	USB_LINK_RESERVED3_8505,
+	USB_LINK_HM_IDGND_8505,
+	USB_LINK_CHARGERPORT_NOT_OK_8505,
+	USB_LINK_CHARGER_DM_HIGH_8505,
+	USB_LINK_PHYEN_NO_VBUS_NO_IDGND_8505,
+	USB_LINK_STD_UPSTREAM_NO_IDGNG_NO_VBUS_8505,
+	USB_LINK_STD_UPSTREAM_8505,
+	USB_LINK_CHARGER_SE1_8505,
+	USB_LINK_CARKIT_CHGR_1_8505,
+	USB_LINK_CARKIT_CHGR_2_8505,
+	USB_LINK_ACA_DOCK_CHGR_8505,
+	USB_LINK_SAMSUNG_BOOT_CBL_PHY_EN_8505,
+	USB_LINK_SAMSUNG_BOOT_CBL_PHY_DISB_8505,
+	USB_LINK_SAMSUNG_UART_CBL_PHY_EN_8505,
+	USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_8505,
+	USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_8505,
+};
+
+enum ab8500_usb_mode {
+	USB_IDLE = 0,
+	USB_PERIPHERAL,
+	USB_HOST,
+	USB_DEDICATED_CHG,
+	USB_UART
+};
+
+/* Register USB_LINK_STATUS interrupt */
+#define AB8500_USB_FLAG_USE_LINK_STATUS_IRQ	(1 << 0)
+/* Register ID_WAKEUP_F interrupt */
+#define AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ	(1 << 1)
+/* Register VBUS_DET_F interrupt */
+#define AB8500_USB_FLAG_USE_VBUS_DET_IRQ	(1 << 2)
+/* Driver is using the ab-iddet driver*/
+#define AB8500_USB_FLAG_USE_AB_IDDET		(1 << 3)
+/* Enable setting regulators voltage */
+#define AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE	(1 << 4)
+
+struct ab8500_usb {
+	struct usb_phy phy;
+	struct device *dev;
+	struct ab8500 *ab8500;
+	unsigned vbus_draw;
+	struct work_struct phy_dis_work;
+	enum ab8500_usb_mode mode;
+	struct clk *sysclk;
+	struct regulator *v_ape;
+	struct regulator *v_musb;
+	struct regulator *v_ulpi;
+	int saved_v_ulpi;
+	int previous_link_status_state;
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *pins_sleep;
+	bool enabled_charging_detection;
+	unsigned int flags;
+};
+
+static inline struct ab8500_usb *phy_to_ab(struct usb_phy *x)
+{
+	return container_of(x, struct ab8500_usb, phy);
+}
+
+static void ab8500_usb_wd_workaround(struct ab8500_usb *ab)
+{
+	abx500_set_register_interruptible(ab->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WD_CTRL_REG,
+		AB8500_BIT_WD_CTRL_ENABLE);
+
+	udelay(AB8500_WD_KICK_DELAY_US);
+
+	abx500_set_register_interruptible(ab->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WD_CTRL_REG,
+		(AB8500_BIT_WD_CTRL_ENABLE
+		| AB8500_BIT_WD_CTRL_KICK));
+
+	udelay(AB8500_WD_V11_DISABLE_DELAY_US);
+
+	abx500_set_register_interruptible(ab->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WD_CTRL_REG,
+		0);
+}
+
+static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
+{
+	int ret, volt;
+
+	ret = regulator_enable(ab->v_ape);
+	if (ret)
+		dev_err(ab->dev, "Failed to enable v-ape\n");
+
+	if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
+		ab->saved_v_ulpi = regulator_get_voltage(ab->v_ulpi);
+		if (ab->saved_v_ulpi < 0)
+			dev_err(ab->dev, "Failed to get v_ulpi voltage\n");
+
+		ret = regulator_set_voltage(ab->v_ulpi, 1300000, 1350000);
+		if (ret < 0)
+			dev_err(ab->dev, "Failed to set the Vintcore to 1.3V, ret=%d\n",
+					ret);
+
+		ret = regulator_set_load(ab->v_ulpi, 28000);
+		if (ret < 0)
+			dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n",
+					ret);
+	}
+
+	ret = regulator_enable(ab->v_ulpi);
+	if (ret)
+		dev_err(ab->dev, "Failed to enable vddulpivio18\n");
+
+	if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
+		volt = regulator_get_voltage(ab->v_ulpi);
+		if ((volt != 1300000) && (volt != 1350000))
+			dev_err(ab->dev, "Vintcore is not set to 1.3V volt=%d\n",
+					volt);
+	}
+
+	ret = regulator_enable(ab->v_musb);
+	if (ret)
+		dev_err(ab->dev, "Failed to enable musb_1v8\n");
+}
+
+static void ab8500_usb_regulator_disable(struct ab8500_usb *ab)
+{
+	int ret;
+
+	regulator_disable(ab->v_musb);
+
+	regulator_disable(ab->v_ulpi);
+
+	/* USB is not the only consumer of Vintcore, restore old settings */
+	if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
+		if (ab->saved_v_ulpi > 0) {
+			ret = regulator_set_voltage(ab->v_ulpi,
+					ab->saved_v_ulpi, ab->saved_v_ulpi);
+			if (ret < 0)
+				dev_err(ab->dev, "Failed to set the Vintcore to %duV, ret=%d\n",
+						ab->saved_v_ulpi, ret);
+		}
+
+		ret = regulator_set_load(ab->v_ulpi, 0);
+		if (ret < 0)
+			dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n",
+					ret);
+	}
+
+	regulator_disable(ab->v_ape);
+}
+
+static void ab8500_usb_wd_linkstatus(struct ab8500_usb *ab, u8 bit)
+{
+	/* Workaround for v2.0 bug # 31952 */
+	if (is_ab8500_2p0(ab->ab8500)) {
+		abx500_mask_and_set_register_interruptible(ab->dev,
+				AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+				bit, bit);
+		udelay(AB8500_V20_31952_DISABLE_DELAY_US);
+	}
+}
+
+static void ab8500_usb_phy_enable(struct ab8500_usb *ab, bool sel_host)
+{
+	u8 bit;
+	bit = sel_host ? AB8500_BIT_PHY_CTRL_HOST_EN :
+		AB8500_BIT_PHY_CTRL_DEVICE_EN;
+
+	/* mux and configure USB pins to DEFAULT state */
+	ab->pinctrl = pinctrl_get_select(ab->dev, PINCTRL_STATE_DEFAULT);
+	if (IS_ERR(ab->pinctrl))
+		dev_err(ab->dev, "could not get/set default pinstate\n");
+
+	if (clk_prepare_enable(ab->sysclk))
+		dev_err(ab->dev, "can't prepare/enable clock\n");
+
+	ab8500_usb_regulator_enable(ab);
+
+	abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+			bit, bit);
+}
+
+static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host)
+{
+	u8 bit;
+	bit = sel_host ? AB8500_BIT_PHY_CTRL_HOST_EN :
+		AB8500_BIT_PHY_CTRL_DEVICE_EN;
+
+	ab8500_usb_wd_linkstatus(ab, bit);
+
+	abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+			bit, 0);
+
+	/* Needed to disable the phy.*/
+	ab8500_usb_wd_workaround(ab);
+
+	clk_disable_unprepare(ab->sysclk);
+
+	ab8500_usb_regulator_disable(ab);
+
+	if (!IS_ERR(ab->pinctrl)) {
+		/* configure USB pins to SLEEP state */
+		ab->pins_sleep = pinctrl_lookup_state(ab->pinctrl,
+				PINCTRL_STATE_SLEEP);
+
+		if (IS_ERR(ab->pins_sleep))
+			dev_dbg(ab->dev, "could not get sleep pinstate\n");
+		else if (pinctrl_select_state(ab->pinctrl, ab->pins_sleep))
+			dev_err(ab->dev, "could not set pins to sleep state\n");
+
+		/*
+		 * as USB pins are shared with iddet, release them to allow
+		 * iddet to request them
+		 */
+		pinctrl_put(ab->pinctrl);
+	}
+}
+
+#define ab8500_usb_host_phy_en(ab)	ab8500_usb_phy_enable(ab, true)
+#define ab8500_usb_host_phy_dis(ab)	ab8500_usb_phy_disable(ab, true)
+#define ab8500_usb_peri_phy_en(ab)	ab8500_usb_phy_enable(ab, false)
+#define ab8500_usb_peri_phy_dis(ab)	ab8500_usb_phy_disable(ab, false)
+
+static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
+		enum ab8505_usb_link_status lsts)
+{
+	enum ux500_musb_vbus_id_status event = 0;
+
+	dev_dbg(ab->dev, "ab8505_usb_link_status_update %d\n", lsts);
+
+	/*
+	 * Spurious link_status interrupts are seen at the time of
+	 * disconnection of a device in RIDA state
+	 */
+	if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_8505 &&
+			(lsts == USB_LINK_STD_HOST_NC_8505))
+		return 0;
+
+	ab->previous_link_status_state = lsts;
+
+	switch (lsts) {
+	case USB_LINK_ACA_RID_B_8505:
+		event = UX500_MUSB_RIDB;
+		fallthrough;
+	case USB_LINK_NOT_CONFIGURED_8505:
+	case USB_LINK_RESERVED0_8505:
+	case USB_LINK_RESERVED1_8505:
+	case USB_LINK_RESERVED2_8505:
+	case USB_LINK_RESERVED3_8505:
+		ab->mode = USB_IDLE;
+		ab->phy.otg->default_a = false;
+		ab->vbus_draw = 0;
+		if (event != UX500_MUSB_RIDB)
+			event = UX500_MUSB_NONE;
+		/*
+		 * Fallback to default B_IDLE as nothing
+		 * is connected
+		 */
+		ab->phy.otg->state = OTG_STATE_B_IDLE;
+		usb_phy_set_event(&ab->phy, USB_EVENT_NONE);
+		break;
+
+	case USB_LINK_ACA_RID_C_NM_8505:
+		event = UX500_MUSB_RIDC;
+		fallthrough;
+	case USB_LINK_STD_HOST_NC_8505:
+	case USB_LINK_STD_HOST_C_NS_8505:
+	case USB_LINK_STD_HOST_C_S_8505:
+	case USB_LINK_CDP_8505:
+		if (ab->mode == USB_IDLE) {
+			ab->mode = USB_PERIPHERAL;
+			ab8500_usb_peri_phy_en(ab);
+			atomic_notifier_call_chain(&ab->phy.notifier,
+					UX500_MUSB_PREPARE, &ab->vbus_draw);
+			usb_phy_set_event(&ab->phy, USB_EVENT_ENUMERATED);
+		}
+		if (event != UX500_MUSB_RIDC)
+			event = UX500_MUSB_VBUS;
+		break;
+
+	case USB_LINK_ACA_RID_A_8505:
+	case USB_LINK_ACA_DOCK_CHGR_8505:
+		event = UX500_MUSB_RIDA;
+		fallthrough;
+	case USB_LINK_HM_IDGND_8505:
+		if (ab->mode == USB_IDLE) {
+			ab->mode = USB_HOST;
+			ab8500_usb_host_phy_en(ab);
+			atomic_notifier_call_chain(&ab->phy.notifier,
+					UX500_MUSB_PREPARE, &ab->vbus_draw);
+		}
+		ab->phy.otg->default_a = true;
+		if (event != UX500_MUSB_RIDA)
+			event = UX500_MUSB_ID;
+		atomic_notifier_call_chain(&ab->phy.notifier,
+				event, &ab->vbus_draw);
+		break;
+
+	case USB_LINK_DEDICATED_CHG_8505:
+		ab->mode = USB_DEDICATED_CHG;
+		event = UX500_MUSB_CHARGER;
+		atomic_notifier_call_chain(&ab->phy.notifier,
+				event, &ab->vbus_draw);
+		usb_phy_set_event(&ab->phy, USB_EVENT_CHARGER);
+		break;
+
+	/*
+	 * FIXME: For now we rely on the boot firmware to set up the necessary
+	 * PHY/pin configuration for UART mode.
+	 *
+	 * AB8505 does not seem to report any status change for UART cables,
+	 * possibly because it cannot detect them autonomously.
+	 * We may need to measure the ID resistance manually to reliably
+	 * detect UART cables after bootup.
+	 */
+	case USB_LINK_SAMSUNG_UART_CBL_PHY_EN_8505:
+	case USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_8505:
+		if (ab->mode == USB_IDLE) {
+			ab->mode = USB_UART;
+			ab8500_usb_peri_phy_en(ab);
+		}
+
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
+		enum ab8500_usb_link_status lsts)
+{
+	enum ux500_musb_vbus_id_status event = 0;
+
+	dev_dbg(ab->dev, "ab8500_usb_link_status_update %d\n", lsts);
+
+	/*
+	 * Spurious link_status interrupts are seen in case of a
+	 * disconnection of a device in IDGND and RIDA stage
+	 */
+	if (ab->previous_link_status_state == USB_LINK_HM_IDGND_8500 &&
+			(lsts == USB_LINK_STD_HOST_C_NS_8500 ||
+			 lsts == USB_LINK_STD_HOST_NC_8500))
+		return 0;
+
+	if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_8500 &&
+			lsts == USB_LINK_STD_HOST_NC_8500)
+		return 0;
+
+	ab->previous_link_status_state = lsts;
+
+	switch (lsts) {
+	case USB_LINK_ACA_RID_B_8500:
+		event = UX500_MUSB_RIDB;
+		fallthrough;
+	case USB_LINK_NOT_CONFIGURED_8500:
+	case USB_LINK_NOT_VALID_LINK_8500:
+		ab->mode = USB_IDLE;
+		ab->phy.otg->default_a = false;
+		ab->vbus_draw = 0;
+		if (event != UX500_MUSB_RIDB)
+			event = UX500_MUSB_NONE;
+		/* Fallback to default B_IDLE as nothing is connected */
+		ab->phy.otg->state = OTG_STATE_B_IDLE;
+		usb_phy_set_event(&ab->phy, USB_EVENT_NONE);
+		break;
+
+	case USB_LINK_ACA_RID_C_NM_8500:
+	case USB_LINK_ACA_RID_C_HS_8500:
+	case USB_LINK_ACA_RID_C_HS_CHIRP_8500:
+		event = UX500_MUSB_RIDC;
+		fallthrough;
+	case USB_LINK_STD_HOST_NC_8500:
+	case USB_LINK_STD_HOST_C_NS_8500:
+	case USB_LINK_STD_HOST_C_S_8500:
+	case USB_LINK_HOST_CHG_NM_8500:
+	case USB_LINK_HOST_CHG_HS_8500:
+	case USB_LINK_HOST_CHG_HS_CHIRP_8500:
+		if (ab->mode == USB_IDLE) {
+			ab->mode = USB_PERIPHERAL;
+			ab8500_usb_peri_phy_en(ab);
+			atomic_notifier_call_chain(&ab->phy.notifier,
+					UX500_MUSB_PREPARE, &ab->vbus_draw);
+			usb_phy_set_event(&ab->phy, USB_EVENT_ENUMERATED);
+		}
+		if (event != UX500_MUSB_RIDC)
+			event = UX500_MUSB_VBUS;
+		break;
+
+	case USB_LINK_ACA_RID_A_8500:
+		event = UX500_MUSB_RIDA;
+		fallthrough;
+	case USB_LINK_HM_IDGND_8500:
+		if (ab->mode == USB_IDLE) {
+			ab->mode = USB_HOST;
+			ab8500_usb_host_phy_en(ab);
+			atomic_notifier_call_chain(&ab->phy.notifier,
+					UX500_MUSB_PREPARE, &ab->vbus_draw);
+		}
+		ab->phy.otg->default_a = true;
+		if (event != UX500_MUSB_RIDA)
+			event = UX500_MUSB_ID;
+		atomic_notifier_call_chain(&ab->phy.notifier,
+				event, &ab->vbus_draw);
+		break;
+
+	case USB_LINK_DEDICATED_CHG_8500:
+		ab->mode = USB_DEDICATED_CHG;
+		event = UX500_MUSB_CHARGER;
+		atomic_notifier_call_chain(&ab->phy.notifier,
+				event, &ab->vbus_draw);
+		usb_phy_set_event(&ab->phy, USB_EVENT_CHARGER);
+		break;
+
+	case USB_LINK_RESERVED_8500:
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ * Connection Sequence:
+ *   1. Link Status Interrupt
+ *   2. Enable AB clock
+ *   3. Enable AB regulators
+ *   4. Enable USB phy
+ *   5. Reset the musb controller
+ *   6. Switch the ULPI GPIO pins to function mode
+ *   7. Enable the musb Peripheral5 clock
+ *   8. Restore MUSB context
+ */
+static int abx500_usb_link_status_update(struct ab8500_usb *ab)
+{
+	u8 reg;
+	int ret = 0;
+
+	if (is_ab8500(ab->ab8500)) {
+		enum ab8500_usb_link_status lsts;
+
+		ret = abx500_get_register_interruptible(ab->dev,
+				AB8500_USB, AB8500_USB_LINE_STAT_REG, &reg);
+		if (ret < 0)
+			return ret;
+		lsts = (reg >> 3) & 0x0F;
+		ret = ab8500_usb_link_status_update(ab, lsts);
+	} else if (is_ab8505(ab->ab8500)) {
+		enum ab8505_usb_link_status lsts;
+
+		ret = abx500_get_register_interruptible(ab->dev,
+				AB8500_USB, AB8505_USB_LINE_STAT_REG, &reg);
+		if (ret < 0)
+			return ret;
+		lsts = (reg >> 3) & 0x1F;
+		ret = ab8505_usb_link_status_update(ab, lsts);
+	}
+
+	return ret;
+}
+
+/*
+ * Disconnection Sequence:
+ *   1. Disconnect Interrupt
+ *   2. Disable regulators
+ *   3. Disable AB clock
+ *   4. Disable the Phy
+ *   5. Link Status Interrupt
+ *   6. Disable Musb Clock
+ */
+static irqreturn_t ab8500_usb_disconnect_irq(int irq, void *data)
+{
+	struct ab8500_usb *ab = (struct ab8500_usb *) data;
+	enum usb_phy_events event = USB_EVENT_NONE;
+
+	/* Link status will not be updated till phy is disabled. */
+	if (ab->mode == USB_HOST) {
+		ab->phy.otg->default_a = false;
+		ab->vbus_draw = 0;
+		atomic_notifier_call_chain(&ab->phy.notifier,
+				event, &ab->vbus_draw);
+		ab8500_usb_host_phy_dis(ab);
+		ab->mode = USB_IDLE;
+	}
+
+	if (ab->mode == USB_PERIPHERAL) {
+		atomic_notifier_call_chain(&ab->phy.notifier,
+				event, &ab->vbus_draw);
+		ab8500_usb_peri_phy_dis(ab);
+		atomic_notifier_call_chain(&ab->phy.notifier,
+				UX500_MUSB_CLEAN, &ab->vbus_draw);
+		ab->mode = USB_IDLE;
+		ab->phy.otg->default_a = false;
+		ab->vbus_draw = 0;
+	}
+
+	if (ab->mode == USB_UART) {
+		ab8500_usb_peri_phy_dis(ab);
+		ab->mode = USB_IDLE;
+	}
+
+	if (is_ab8500_2p0(ab->ab8500)) {
+		if (ab->mode == USB_DEDICATED_CHG) {
+			ab8500_usb_wd_linkstatus(ab,
+					AB8500_BIT_PHY_CTRL_DEVICE_EN);
+			abx500_mask_and_set_register_interruptible(ab->dev,
+					AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+					AB8500_BIT_PHY_CTRL_DEVICE_EN, 0);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ab8500_usb_link_status_irq(int irq, void *data)
+{
+	struct ab8500_usb *ab = (struct ab8500_usb *)data;
+
+	abx500_usb_link_status_update(ab);
+
+	return IRQ_HANDLED;
+}
+
+static void ab8500_usb_phy_disable_work(struct work_struct *work)
+{
+	struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
+						phy_dis_work);
+
+	if (!ab->phy.otg->host)
+		ab8500_usb_host_phy_dis(ab);
+
+	if (!ab->phy.otg->gadget)
+		ab8500_usb_peri_phy_dis(ab);
+}
+
+static int ab8500_usb_set_suspend(struct usb_phy *x, int suspend)
+{
+	/* TODO */
+	return 0;
+}
+
+static int ab8500_usb_set_peripheral(struct usb_otg *otg,
+					struct usb_gadget *gadget)
+{
+	struct ab8500_usb *ab;
+
+	if (!otg)
+		return -ENODEV;
+
+	ab = phy_to_ab(otg->usb_phy);
+
+	ab->phy.otg->gadget = gadget;
+
+	/* Some drivers call this function in atomic context.
+	 * Do not update ab8500 registers directly till this
+	 * is fixed.
+	 */
+
+	if ((ab->mode != USB_IDLE) && !gadget) {
+		ab->mode = USB_IDLE;
+		schedule_work(&ab->phy_dis_work);
+	}
+
+	return 0;
+}
+
+static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	struct ab8500_usb *ab;
+
+	if (!otg)
+		return -ENODEV;
+
+	ab = phy_to_ab(otg->usb_phy);
+
+	ab->phy.otg->host = host;
+
+	/* Some drivers call this function in atomic context.
+	 * Do not update ab8500 registers directly till this
+	 * is fixed.
+	 */
+
+	if ((ab->mode != USB_IDLE) && !host) {
+		ab->mode = USB_IDLE;
+		schedule_work(&ab->phy_dis_work);
+	}
+
+	return 0;
+}
+
+static void ab8500_usb_restart_phy(struct ab8500_usb *ab)
+{
+	abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+			AB8500_BIT_PHY_CTRL_DEVICE_EN,
+			AB8500_BIT_PHY_CTRL_DEVICE_EN);
+
+	udelay(100);
+
+	abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+			AB8500_BIT_PHY_CTRL_DEVICE_EN,
+			0);
+
+	abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+			AB8500_BIT_PHY_CTRL_HOST_EN,
+			AB8500_BIT_PHY_CTRL_HOST_EN);
+
+	udelay(100);
+
+	abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+			AB8500_BIT_PHY_CTRL_HOST_EN,
+			0);
+}
+
+static int ab8500_usb_regulator_get(struct ab8500_usb *ab)
+{
+	int err;
+
+	ab->v_ape = devm_regulator_get(ab->dev, "v-ape");
+	if (IS_ERR(ab->v_ape)) {
+		dev_err(ab->dev, "Could not get v-ape supply\n");
+		err = PTR_ERR(ab->v_ape);
+		return err;
+	}
+
+	ab->v_ulpi = devm_regulator_get(ab->dev, "vddulpivio18");
+	if (IS_ERR(ab->v_ulpi)) {
+		dev_err(ab->dev, "Could not get vddulpivio18 supply\n");
+		err = PTR_ERR(ab->v_ulpi);
+		return err;
+	}
+
+	ab->v_musb = devm_regulator_get(ab->dev, "musb_1v8");
+	if (IS_ERR(ab->v_musb)) {
+		dev_err(ab->dev, "Could not get musb_1v8 supply\n");
+		err = PTR_ERR(ab->v_musb);
+		return err;
+	}
+
+	return 0;
+}
+
+static int ab8500_usb_irq_setup(struct platform_device *pdev,
+		struct ab8500_usb *ab)
+{
+	int err;
+	int irq;
+
+	if (ab->flags & AB8500_USB_FLAG_USE_LINK_STATUS_IRQ) {
+		irq = platform_get_irq_byname(pdev, "USB_LINK_STATUS");
+		if (irq < 0)
+			return irq;
+		err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+				ab8500_usb_link_status_irq,
+				IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
+				"usb-link-status", ab);
+		if (err < 0) {
+			dev_err(ab->dev, "request_irq failed for link status irq\n");
+			return err;
+		}
+	}
+
+	if (ab->flags & AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ) {
+		irq = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
+		if (irq < 0)
+			return irq;
+		err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+				ab8500_usb_disconnect_irq,
+				IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
+				"usb-id-fall", ab);
+		if (err < 0) {
+			dev_err(ab->dev, "request_irq failed for ID fall irq\n");
+			return err;
+		}
+	}
+
+	if (ab->flags & AB8500_USB_FLAG_USE_VBUS_DET_IRQ) {
+		irq = platform_get_irq_byname(pdev, "VBUS_DET_F");
+		if (irq < 0)
+			return irq;
+		err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+				ab8500_usb_disconnect_irq,
+				IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
+				"usb-vbus-fall", ab);
+		if (err < 0) {
+			dev_err(ab->dev, "request_irq failed for Vbus fall irq\n");
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static void ab8500_usb_set_ab8500_tuning_values(struct ab8500_usb *ab)
+{
+	int err;
+
+	/* Enable the PBT/Bank 0x12 access */
+	err = abx500_set_register_interruptible(ab->dev,
+			AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01);
+	if (err < 0)
+		dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+				err);
+
+	err = abx500_set_register_interruptible(ab->dev,
+			AB8500_DEBUG, AB8500_USB_PHY_TUNE1, 0xC8);
+	if (err < 0)
+		dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+				err);
+
+	err = abx500_set_register_interruptible(ab->dev,
+			AB8500_DEBUG, AB8500_USB_PHY_TUNE2, 0x00);
+	if (err < 0)
+		dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+				err);
+
+	err = abx500_set_register_interruptible(ab->dev,
+			AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x78);
+	if (err < 0)
+		dev_err(ab->dev, "Failed to set PHY_TUNE3 register err=%d\n",
+				err);
+
+	/* Switch to normal mode/disable Bank 0x12 access */
+	err = abx500_set_register_interruptible(ab->dev,
+			AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x00);
+	if (err < 0)
+		dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+				err);
+}
+
+static void ab8500_usb_set_ab8505_tuning_values(struct ab8500_usb *ab)
+{
+	int err;
+
+	/* Enable the PBT/Bank 0x12 access */
+	err = abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
+			0x01, 0x01);
+	if (err < 0)
+		dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+				err);
+
+	err = abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_DEBUG, AB8500_USB_PHY_TUNE1,
+			0xC8, 0xC8);
+	if (err < 0)
+		dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+				err);
+
+	err = abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_DEBUG, AB8500_USB_PHY_TUNE2,
+			0x60, 0x60);
+	if (err < 0)
+		dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+				err);
+
+	err = abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_DEBUG, AB8500_USB_PHY_TUNE3,
+			0xFC, 0x80);
+
+	if (err < 0)
+		dev_err(ab->dev, "Failed to set PHY_TUNE3 register err=%d\n",
+				err);
+
+	/* Switch to normal mode/disable Bank 0x12 access */
+	err = abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
+			0x00, 0x00);
+	if (err < 0)
+		dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+				err);
+}
+
+static int ab8500_usb_probe(struct platform_device *pdev)
+{
+	struct ab8500_usb	*ab;
+	struct ab8500		*ab8500;
+	struct usb_otg		*otg;
+	int err;
+	int rev;
+
+	ab8500 = dev_get_drvdata(pdev->dev.parent);
+	rev = abx500_get_chip_id(&pdev->dev);
+
+	if (is_ab8500_1p1_or_earlier(ab8500)) {
+		dev_err(&pdev->dev, "Unsupported AB8500 chip rev=%d\n", rev);
+		return -ENODEV;
+	}
+
+	ab = devm_kzalloc(&pdev->dev, sizeof(*ab), GFP_KERNEL);
+	if (!ab)
+		return -ENOMEM;
+
+	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	ab->dev			= &pdev->dev;
+	ab->ab8500		= ab8500;
+	ab->phy.dev		= ab->dev;
+	ab->phy.otg		= otg;
+	ab->phy.label		= "ab8500";
+	ab->phy.set_suspend	= ab8500_usb_set_suspend;
+	ab->phy.otg->state	= OTG_STATE_UNDEFINED;
+
+	otg->usb_phy		= &ab->phy;
+	otg->set_host		= ab8500_usb_set_host;
+	otg->set_peripheral	= ab8500_usb_set_peripheral;
+
+	if (is_ab8500(ab->ab8500)) {
+		ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+			AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+			AB8500_USB_FLAG_USE_VBUS_DET_IRQ |
+			AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+	} else if (is_ab8505(ab->ab8500)) {
+		ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+			AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+			AB8500_USB_FLAG_USE_VBUS_DET_IRQ |
+			AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+	}
+
+	/* Disable regulator voltage setting for AB8500 <= v2.0 */
+	if (is_ab8500_2p0_or_earlier(ab->ab8500))
+		ab->flags &= ~AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+
+	platform_set_drvdata(pdev, ab);
+
+	/* all: Disable phy when called from set_host and set_peripheral */
+	INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work);
+
+	err = ab8500_usb_regulator_get(ab);
+	if (err)
+		return err;
+
+	ab->sysclk = devm_clk_get(ab->dev, "sysclk");
+	if (IS_ERR(ab->sysclk)) {
+		dev_err(ab->dev, "Could not get sysclk.\n");
+		return PTR_ERR(ab->sysclk);
+	}
+
+	err = ab8500_usb_irq_setup(pdev, ab);
+	if (err < 0)
+		return err;
+
+	err = usb_add_phy(&ab->phy, USB_PHY_TYPE_USB2);
+	if (err) {
+		dev_err(&pdev->dev, "Can't register transceiver\n");
+		return err;
+	}
+
+	if (is_ab8500(ab->ab8500) && !is_ab8500_2p0_or_earlier(ab->ab8500))
+		/* Phy tuning values for AB8500 > v2.0 */
+		ab8500_usb_set_ab8500_tuning_values(ab);
+	else if (is_ab8505(ab->ab8500))
+		/* Phy tuning values for AB8505 */
+		ab8500_usb_set_ab8505_tuning_values(ab);
+
+	/* Needed to enable ID detection. */
+	ab8500_usb_wd_workaround(ab);
+
+	/*
+	 * This is required for usb-link-status to work properly when a
+	 * cable is connected at boot time.
+	 */
+	ab8500_usb_restart_phy(ab);
+
+	abx500_usb_link_status_update(ab);
+
+	dev_info(&pdev->dev, "revision 0x%2x driver initialized\n", rev);
+
+	return 0;
+}
+
+static int ab8500_usb_remove(struct platform_device *pdev)
+{
+	struct ab8500_usb *ab = platform_get_drvdata(pdev);
+
+	cancel_work_sync(&ab->phy_dis_work);
+
+	usb_remove_phy(&ab->phy);
+
+	if (ab->mode == USB_HOST)
+		ab8500_usb_host_phy_dis(ab);
+	else if (ab->mode == USB_PERIPHERAL)
+		ab8500_usb_peri_phy_dis(ab);
+
+	return 0;
+}
+
+static const struct platform_device_id ab8500_usb_devtype[] = {
+	{ .name = "ab8500-usb", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, ab8500_usb_devtype);
+
+static struct platform_driver ab8500_usb_driver = {
+	.probe		= ab8500_usb_probe,
+	.remove		= ab8500_usb_remove,
+	.id_table	= ab8500_usb_devtype,
+	.driver		= {
+		.name	= "abx5x0-usb",
+	},
+};
+
+static int __init ab8500_usb_init(void)
+{
+	return platform_driver_register(&ab8500_usb_driver);
+}
+subsys_initcall(ab8500_usb_init);
+
+static void __exit ab8500_usb_exit(void)
+{
+	platform_driver_unregister(&ab8500_usb_driver);
+}
+module_exit(ab8500_usb_exit);
+
+MODULE_AUTHOR("ST-Ericsson AB");
+MODULE_DESCRIPTION("AB8500 family usb transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/phy-am335x-control.c b/drivers/usb/phy/phy-am335x-control.c
new file mode 100644
index 000000000..97e6603c7
--- /dev/null
+++ b/drivers/usb/phy/phy-am335x-control.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/otg.h>
+#include "phy-am335x-control.h"
+
+struct am335x_control_usb {
+	struct device *dev;
+	void __iomem *phy_reg;
+	void __iomem *wkup;
+	spinlock_t lock;
+	struct phy_control phy_ctrl;
+};
+
+#define AM335X_USB0_CTRL		0x0
+#define AM335X_USB1_CTRL		0x8
+#define AM335x_USB_WKUP			0x0
+
+#define USBPHY_CM_PWRDN		(1 << 0)
+#define USBPHY_OTG_PWRDN	(1 << 1)
+#define USBPHY_OTGVDET_EN	(1 << 19)
+#define USBPHY_OTGSESSEND_EN	(1 << 20)
+
+#define AM335X_PHY0_WK_EN	(1 << 0)
+#define AM335X_PHY1_WK_EN	(1 << 8)
+
+static void am335x_phy_wkup(struct  phy_control *phy_ctrl, u32 id, bool on)
+{
+	struct am335x_control_usb *usb_ctrl;
+	u32 val;
+	u32 reg;
+
+	usb_ctrl = container_of(phy_ctrl, struct am335x_control_usb, phy_ctrl);
+
+	switch (id) {
+	case 0:
+		reg = AM335X_PHY0_WK_EN;
+		break;
+	case 1:
+		reg = AM335X_PHY1_WK_EN;
+		break;
+	default:
+		WARN_ON(1);
+		return;
+	}
+
+	spin_lock(&usb_ctrl->lock);
+	val = readl(usb_ctrl->wkup);
+
+	if (on)
+		val |= reg;
+	else
+		val &= ~reg;
+
+	writel(val, usb_ctrl->wkup);
+	spin_unlock(&usb_ctrl->lock);
+}
+
+static void am335x_phy_power(struct phy_control *phy_ctrl, u32 id,
+				enum usb_dr_mode dr_mode, bool on)
+{
+	struct am335x_control_usb *usb_ctrl;
+	u32 val;
+	u32 reg;
+
+	usb_ctrl = container_of(phy_ctrl, struct am335x_control_usb, phy_ctrl);
+
+	switch (id) {
+	case 0:
+		reg = AM335X_USB0_CTRL;
+		break;
+	case 1:
+		reg = AM335X_USB1_CTRL;
+		break;
+	default:
+		WARN_ON(1);
+		return;
+	}
+
+	val = readl(usb_ctrl->phy_reg + reg);
+	if (on) {
+		if (dr_mode == USB_DR_MODE_HOST) {
+			val &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN |
+					USBPHY_OTGVDET_EN);
+			val |= USBPHY_OTGSESSEND_EN;
+		} else {
+			val &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN);
+			val |= USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN;
+		}
+	} else {
+		val |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
+	}
+
+	writel(val, usb_ctrl->phy_reg + reg);
+
+	/*
+	 * Give the PHY ~1ms to complete the power up operation.
+	 * Tests have shown unstable behaviour if other USB PHY related
+	 * registers are written too shortly after such a transition.
+	 */
+	if (on)
+		mdelay(1);
+}
+
+static const struct phy_control ctrl_am335x = {
+	.phy_power = am335x_phy_power,
+	.phy_wkup = am335x_phy_wkup,
+};
+
+static const struct of_device_id omap_control_usb_id_table[] = {
+	{ .compatible = "ti,am335x-usb-ctrl-module", .data = &ctrl_am335x },
+	{}
+};
+MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
+
+static struct platform_driver am335x_control_driver;
+static int match(struct device *dev, const void *data)
+{
+	const struct device_node *node = (const struct device_node *)data;
+	return dev->of_node == node &&
+		dev->driver == &am335x_control_driver.driver;
+}
+
+struct phy_control *am335x_get_phy_control(struct device *dev)
+{
+	struct device_node *node;
+	struct am335x_control_usb *ctrl_usb;
+
+	node = of_parse_phandle(dev->of_node, "ti,ctrl_mod", 0);
+	if (!node)
+		return NULL;
+
+	dev = bus_find_device(&platform_bus_type, NULL, node, match);
+	of_node_put(node);
+	if (!dev)
+		return NULL;
+
+	ctrl_usb = dev_get_drvdata(dev);
+	put_device(dev);
+	if (!ctrl_usb)
+		return NULL;
+	return &ctrl_usb->phy_ctrl;
+}
+EXPORT_SYMBOL_GPL(am335x_get_phy_control);
+
+static int am335x_control_usb_probe(struct platform_device *pdev)
+{
+	struct am335x_control_usb *ctrl_usb;
+	const struct of_device_id *of_id;
+	const struct phy_control *phy_ctrl;
+
+	of_id = of_match_node(omap_control_usb_id_table, pdev->dev.of_node);
+	if (!of_id)
+		return -EINVAL;
+
+	phy_ctrl = of_id->data;
+
+	ctrl_usb = devm_kzalloc(&pdev->dev, sizeof(*ctrl_usb), GFP_KERNEL);
+	if (!ctrl_usb)
+		return -ENOMEM;
+
+	ctrl_usb->dev = &pdev->dev;
+
+	ctrl_usb->phy_reg = devm_platform_ioremap_resource_byname(pdev, "phy_ctrl");
+	if (IS_ERR(ctrl_usb->phy_reg))
+		return PTR_ERR(ctrl_usb->phy_reg);
+
+	ctrl_usb->wkup = devm_platform_ioremap_resource_byname(pdev, "wakeup");
+	if (IS_ERR(ctrl_usb->wkup))
+		return PTR_ERR(ctrl_usb->wkup);
+
+	spin_lock_init(&ctrl_usb->lock);
+	ctrl_usb->phy_ctrl = *phy_ctrl;
+
+	dev_set_drvdata(ctrl_usb->dev, ctrl_usb);
+	return 0;
+}
+
+static struct platform_driver am335x_control_driver = {
+	.probe		= am335x_control_usb_probe,
+	.driver		= {
+		.name	= "am335x-control-usb",
+		.of_match_table = omap_control_usb_id_table,
+	},
+};
+
+module_platform_driver(am335x_control_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/phy/phy-am335x-control.h b/drivers/usb/phy/phy-am335x-control.h
new file mode 100644
index 000000000..cd4acfc6e
--- /dev/null
+++ b/drivers/usb/phy/phy-am335x-control.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _AM335x_PHY_CONTROL_H_
+#define _AM335x_PHY_CONTROL_H_
+
+struct phy_control {
+	void (*phy_power)(struct phy_control *phy_ctrl, u32 id,
+			enum usb_dr_mode dr_mode, bool on);
+	void (*phy_wkup)(struct phy_control *phy_ctrl, u32 id, bool on);
+};
+
+static inline void phy_ctrl_power(struct phy_control *phy_ctrl, u32 id,
+				enum usb_dr_mode dr_mode, bool on)
+{
+	phy_ctrl->phy_power(phy_ctrl, id, dr_mode, on);
+}
+
+static inline void phy_ctrl_wkup(struct phy_control *phy_ctrl, u32 id, bool on)
+{
+	phy_ctrl->phy_wkup(phy_ctrl, id, on);
+}
+
+struct phy_control *am335x_get_phy_control(struct device *dev);
+
+#endif
diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
new file mode 100644
index 000000000..8524475d9
--- /dev/null
+++ b/drivers/usb/phy/phy-am335x.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/usb_phy_generic.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/usb/of.h>
+
+#include "phy-am335x-control.h"
+#include "phy-generic.h"
+
+struct am335x_phy {
+	struct usb_phy_generic usb_phy_gen;
+	struct phy_control *phy_ctrl;
+	int id;
+	enum usb_dr_mode dr_mode;
+};
+
+static int am335x_init(struct usb_phy *phy)
+{
+	struct am335x_phy *am_phy = dev_get_drvdata(phy->dev);
+
+	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, true);
+	return 0;
+}
+
+static void am335x_shutdown(struct usb_phy *phy)
+{
+	struct am335x_phy *am_phy = dev_get_drvdata(phy->dev);
+
+	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, false);
+}
+
+static int am335x_phy_probe(struct platform_device *pdev)
+{
+	struct am335x_phy *am_phy;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	am_phy = devm_kzalloc(dev, sizeof(*am_phy), GFP_KERNEL);
+	if (!am_phy)
+		return -ENOMEM;
+
+	am_phy->phy_ctrl = am335x_get_phy_control(dev);
+	if (!am_phy->phy_ctrl)
+		return -EPROBE_DEFER;
+
+	am_phy->id = of_alias_get_id(pdev->dev.of_node, "phy");
+	if (am_phy->id < 0) {
+		dev_err(&pdev->dev, "Missing PHY id: %d\n", am_phy->id);
+		return am_phy->id;
+	}
+
+	am_phy->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1);
+
+	ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen);
+	if (ret)
+		return ret;
+
+	am_phy->usb_phy_gen.phy.init = am335x_init;
+	am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown;
+
+	platform_set_drvdata(pdev, am_phy);
+	device_init_wakeup(dev, true);
+
+	/*
+	 * If we leave PHY wakeup enabled then AM33XX wakes up
+	 * immediately from DS0. To avoid this we mark dev->power.can_wakeup
+	 * to false. The same is checked in suspend routine to decide
+	 * on whether to enable PHY wakeup or not.
+	 * PHY wakeup works fine in standby mode, there by allowing us to
+	 * handle remote wakeup, wakeup on disconnect and connect.
+	 */
+
+	device_set_wakeup_enable(dev, false);
+	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, false);
+
+	return usb_add_phy_dev(&am_phy->usb_phy_gen.phy);
+}
+
+static int am335x_phy_remove(struct platform_device *pdev)
+{
+	struct am335x_phy *am_phy = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&am_phy->usb_phy_gen.phy);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int am335x_phy_suspend(struct device *dev)
+{
+	struct am335x_phy *am_phy = dev_get_drvdata(dev);
+
+	/*
+	 * Enable phy wakeup only if dev->power.can_wakeup is true.
+	 * Make sure to enable wakeup to support remote wakeup	in
+	 * standby mode ( same is not supported in OFF(DS0) mode).
+	 * Enable it by doing
+	 * echo enabled > /sys/bus/platform/devices/<usb-phy-id>/power/wakeup
+	 */
+
+	if (device_may_wakeup(dev))
+		phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, true);
+
+	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, false);
+
+	return 0;
+}
+
+static int am335x_phy_resume(struct device *dev)
+{
+	struct am335x_phy	*am_phy = dev_get_drvdata(dev);
+
+	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, true);
+
+	if (device_may_wakeup(dev))
+		phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, false);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(am335x_pm_ops, am335x_phy_suspend, am335x_phy_resume);
+
+static const struct of_device_id am335x_phy_ids[] = {
+	{ .compatible = "ti,am335x-usb-phy" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, am335x_phy_ids);
+
+static struct platform_driver am335x_phy_driver = {
+	.probe          = am335x_phy_probe,
+	.remove         = am335x_phy_remove,
+	.driver         = {
+		.name   = "am335x-phy-driver",
+		.pm = &am335x_pm_ops,
+		.of_match_table = am335x_phy_ids,
+	},
+};
+
+module_platform_driver(am335x_phy_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
new file mode 100644
index 000000000..972704262
--- /dev/null
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -0,0 +1,1018 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2007,2008 Freescale semiconductor, Inc.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ *         Jerry Huang <Chang-Ming.Huang@freescale.com>
+ *
+ * Initialization based on code from Shlomi Gridish.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/timer.h>
+#include <linux/usb.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/workqueue.h>
+#include <linux/time.h>
+#include <linux/fsl_devices.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+
+#include <asm/unaligned.h>
+
+#include "phy-fsl-usb.h"
+
+#ifdef VERBOSE
+#define VDBG(fmt, args...) pr_debug("[%s]  " fmt, \
+				 __func__, ## args)
+#else
+#define VDBG(stuff...)	do {} while (0)
+#endif
+
+#define DRIVER_VERSION "Rev. 1.55"
+#define DRIVER_AUTHOR "Jerry Huang/Li Yang"
+#define DRIVER_DESC "Freescale USB OTG Transceiver Driver"
+#define DRIVER_INFO DRIVER_DESC " " DRIVER_VERSION
+
+static const char driver_name[] = "fsl-usb2-otg";
+
+const pm_message_t otg_suspend_state = {
+	.event = 1,
+};
+
+#define HA_DATA_PULSE
+
+static struct usb_dr_mmap *usb_dr_regs;
+static struct fsl_otg *fsl_otg_dev;
+static int srp_wait_done;
+
+/* FSM timers */
+struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr,
+	*b_ase0_brst_tmr, *b_se0_srp_tmr;
+
+/* Driver specific timers */
+struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr,
+	*b_srp_wait_tmr, *a_wait_enum_tmr;
+
+static struct list_head active_timers;
+
+static const struct fsl_otg_config fsl_otg_initdata = {
+	.otg_port = 1,
+};
+
+#ifdef CONFIG_PPC32
+static u32 _fsl_readl_be(const unsigned __iomem *p)
+{
+	return in_be32(p);
+}
+
+static u32 _fsl_readl_le(const unsigned __iomem *p)
+{
+	return in_le32(p);
+}
+
+static void _fsl_writel_be(u32 v, unsigned __iomem *p)
+{
+	out_be32(p, v);
+}
+
+static void _fsl_writel_le(u32 v, unsigned __iomem *p)
+{
+	out_le32(p, v);
+}
+
+static u32 (*_fsl_readl)(const unsigned __iomem *p);
+static void (*_fsl_writel)(u32 v, unsigned __iomem *p);
+
+#define fsl_readl(p)		(*_fsl_readl)((p))
+#define fsl_writel(v, p)	(*_fsl_writel)((v), (p))
+
+#else
+#define fsl_readl(addr)		readl(addr)
+#define fsl_writel(val, addr)	writel(val, addr)
+#endif /* CONFIG_PPC32 */
+
+int write_ulpi(u8 addr, u8 data)
+{
+	u32 temp;
+
+	temp = 0x60000000 | (addr << 16) | data;
+	fsl_writel(temp, &usb_dr_regs->ulpiview);
+	return 0;
+}
+
+/* -------------------------------------------------------------*/
+/* Operations that will be called from OTG Finite State Machine */
+
+/* Charge vbus for vbus pulsing in SRP */
+void fsl_otg_chrg_vbus(struct otg_fsm *fsm, int on)
+{
+	u32 tmp;
+
+	tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
+
+	if (on)
+		/* stop discharging, start charging */
+		tmp = (tmp & ~OTGSC_CTRL_VBUS_DISCHARGE) |
+			OTGSC_CTRL_VBUS_CHARGE;
+	else
+		/* stop charging */
+		tmp &= ~OTGSC_CTRL_VBUS_CHARGE;
+
+	fsl_writel(tmp, &usb_dr_regs->otgsc);
+}
+
+/* Discharge vbus through a resistor to ground */
+void fsl_otg_dischrg_vbus(int on)
+{
+	u32 tmp;
+
+	tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
+
+	if (on)
+		/* stop charging, start discharging */
+		tmp = (tmp & ~OTGSC_CTRL_VBUS_CHARGE) |
+			OTGSC_CTRL_VBUS_DISCHARGE;
+	else
+		/* stop discharging */
+		tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE;
+
+	fsl_writel(tmp, &usb_dr_regs->otgsc);
+}
+
+/* A-device driver vbus, controlled through PP bit in PORTSC */
+void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on)
+{
+	u32 tmp;
+
+	if (on) {
+		tmp = fsl_readl(&usb_dr_regs->portsc) & ~PORTSC_W1C_BITS;
+		fsl_writel(tmp | PORTSC_PORT_POWER, &usb_dr_regs->portsc);
+	} else {
+		tmp = fsl_readl(&usb_dr_regs->portsc) &
+		      ~PORTSC_W1C_BITS & ~PORTSC_PORT_POWER;
+		fsl_writel(tmp, &usb_dr_regs->portsc);
+	}
+}
+
+/*
+ * Pull-up D+, signalling connect by periperal. Also used in
+ * data-line pulsing in SRP
+ */
+void fsl_otg_loc_conn(struct otg_fsm *fsm, int on)
+{
+	u32 tmp;
+
+	tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
+
+	if (on)
+		tmp |= OTGSC_CTRL_DATA_PULSING;
+	else
+		tmp &= ~OTGSC_CTRL_DATA_PULSING;
+
+	fsl_writel(tmp, &usb_dr_regs->otgsc);
+}
+
+/*
+ * Generate SOF by host.  This is controlled through suspend/resume the
+ * port.  In host mode, controller will automatically send SOF.
+ * Suspend will block the data on the port.
+ */
+void fsl_otg_loc_sof(struct otg_fsm *fsm, int on)
+{
+	u32 tmp;
+
+	tmp = fsl_readl(&fsl_otg_dev->dr_mem_map->portsc) & ~PORTSC_W1C_BITS;
+	if (on)
+		tmp |= PORTSC_PORT_FORCE_RESUME;
+	else
+		tmp |= PORTSC_PORT_SUSPEND;
+
+	fsl_writel(tmp, &fsl_otg_dev->dr_mem_map->portsc);
+
+}
+
+/* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */
+void fsl_otg_start_pulse(struct otg_fsm *fsm)
+{
+	u32 tmp;
+
+	srp_wait_done = 0;
+#ifdef HA_DATA_PULSE
+	tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
+	tmp |= OTGSC_HA_DATA_PULSE;
+	fsl_writel(tmp, &usb_dr_regs->otgsc);
+#else
+	fsl_otg_loc_conn(1);
+#endif
+
+	fsl_otg_add_timer(fsm, b_data_pulse_tmr);
+}
+
+void b_data_pulse_end(unsigned long foo)
+{
+#ifdef HA_DATA_PULSE
+#else
+	fsl_otg_loc_conn(0);
+#endif
+
+	/* Do VBUS pulse after data pulse */
+	fsl_otg_pulse_vbus();
+}
+
+void fsl_otg_pulse_vbus(void)
+{
+	srp_wait_done = 0;
+	fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 1);
+	/* start the timer to end vbus charge */
+	fsl_otg_add_timer(&fsl_otg_dev->fsm, b_vbus_pulse_tmr);
+}
+
+void b_vbus_pulse_end(unsigned long foo)
+{
+	fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 0);
+
+	/*
+	 * As USB3300 using the same a_sess_vld and b_sess_vld voltage
+	 * we need to discharge the bus for a while to distinguish
+	 * residual voltage of vbus pulsing and A device pull up
+	 */
+	fsl_otg_dischrg_vbus(1);
+	fsl_otg_add_timer(&fsl_otg_dev->fsm, b_srp_wait_tmr);
+}
+
+void b_srp_end(unsigned long foo)
+{
+	fsl_otg_dischrg_vbus(0);
+	srp_wait_done = 1;
+
+	if ((fsl_otg_dev->phy.otg->state == OTG_STATE_B_SRP_INIT) &&
+	    fsl_otg_dev->fsm.b_sess_vld)
+		fsl_otg_dev->fsm.b_srp_done = 1;
+}
+
+/*
+ * Workaround for a_host suspending too fast.  When a_bus_req=0,
+ * a_host will start by SRP.  It needs to set b_hnp_enable before
+ * actually suspending to start HNP
+ */
+void a_wait_enum(unsigned long foo)
+{
+	VDBG("a_wait_enum timeout\n");
+	if (!fsl_otg_dev->phy.otg->host->b_hnp_enable)
+		fsl_otg_add_timer(&fsl_otg_dev->fsm, a_wait_enum_tmr);
+	else
+		otg_statemachine(&fsl_otg_dev->fsm);
+}
+
+/* The timeout callback function to set time out bit */
+void set_tmout(unsigned long indicator)
+{
+	*(int *)indicator = 1;
+}
+
+/* Initialize timers */
+int fsl_otg_init_timers(struct otg_fsm *fsm)
+{
+	/* FSM used timers */
+	a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
+				(unsigned long)&fsm->a_wait_vrise_tmout);
+	if (!a_wait_vrise_tmr)
+		return -ENOMEM;
+
+	a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
+				(unsigned long)&fsm->a_wait_bcon_tmout);
+	if (!a_wait_bcon_tmr)
+		return -ENOMEM;
+
+	a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
+				(unsigned long)&fsm->a_aidl_bdis_tmout);
+	if (!a_aidl_bdis_tmr)
+		return -ENOMEM;
+
+	b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
+				(unsigned long)&fsm->b_ase0_brst_tmout);
+	if (!b_ase0_brst_tmr)
+		return -ENOMEM;
+
+	b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
+				(unsigned long)&fsm->b_se0_srp);
+	if (!b_se0_srp_tmr)
+		return -ENOMEM;
+
+	b_srp_fail_tmr = otg_timer_initializer(&set_tmout, TB_SRP_FAIL,
+				(unsigned long)&fsm->b_srp_done);
+	if (!b_srp_fail_tmr)
+		return -ENOMEM;
+
+	a_wait_enum_tmr = otg_timer_initializer(&a_wait_enum, 10,
+				(unsigned long)&fsm);
+	if (!a_wait_enum_tmr)
+		return -ENOMEM;
+
+	/* device driver used timers */
+	b_srp_wait_tmr = otg_timer_initializer(&b_srp_end, TB_SRP_WAIT, 0);
+	if (!b_srp_wait_tmr)
+		return -ENOMEM;
+
+	b_data_pulse_tmr = otg_timer_initializer(&b_data_pulse_end,
+				TB_DATA_PLS, 0);
+	if (!b_data_pulse_tmr)
+		return -ENOMEM;
+
+	b_vbus_pulse_tmr = otg_timer_initializer(&b_vbus_pulse_end,
+				TB_VBUS_PLS, 0);
+	if (!b_vbus_pulse_tmr)
+		return -ENOMEM;
+
+	return 0;
+}
+
+/* Uninitialize timers */
+void fsl_otg_uninit_timers(void)
+{
+	/* FSM used timers */
+	kfree(a_wait_vrise_tmr);
+	kfree(a_wait_bcon_tmr);
+	kfree(a_aidl_bdis_tmr);
+	kfree(b_ase0_brst_tmr);
+	kfree(b_se0_srp_tmr);
+	kfree(b_srp_fail_tmr);
+	kfree(a_wait_enum_tmr);
+
+	/* device driver used timers */
+	kfree(b_srp_wait_tmr);
+	kfree(b_data_pulse_tmr);
+	kfree(b_vbus_pulse_tmr);
+}
+
+static struct fsl_otg_timer *fsl_otg_get_timer(enum otg_fsm_timer t)
+{
+	struct fsl_otg_timer *timer;
+
+	/* REVISIT: use array of pointers to timers instead */
+	switch (t) {
+	case A_WAIT_VRISE:
+		timer = a_wait_vrise_tmr;
+		break;
+	case A_WAIT_BCON:
+		timer = a_wait_vrise_tmr;
+		break;
+	case A_AIDL_BDIS:
+		timer = a_wait_vrise_tmr;
+		break;
+	case B_ASE0_BRST:
+		timer = a_wait_vrise_tmr;
+		break;
+	case B_SE0_SRP:
+		timer = a_wait_vrise_tmr;
+		break;
+	case B_SRP_FAIL:
+		timer = a_wait_vrise_tmr;
+		break;
+	case A_WAIT_ENUM:
+		timer = a_wait_vrise_tmr;
+		break;
+	default:
+		timer = NULL;
+	}
+
+	return timer;
+}
+
+/* Add timer to timer list */
+void fsl_otg_add_timer(struct otg_fsm *fsm, void *gtimer)
+{
+	struct fsl_otg_timer *timer = gtimer;
+	struct fsl_otg_timer *tmp_timer;
+
+	/*
+	 * Check if the timer is already in the active list,
+	 * if so update timer count
+	 */
+	list_for_each_entry(tmp_timer, &active_timers, list)
+	    if (tmp_timer == timer) {
+		timer->count = timer->expires;
+		return;
+	}
+	timer->count = timer->expires;
+	list_add_tail(&timer->list, &active_timers);
+}
+
+static void fsl_otg_fsm_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
+{
+	struct fsl_otg_timer *timer;
+
+	timer = fsl_otg_get_timer(t);
+	if (!timer)
+		return;
+
+	fsl_otg_add_timer(fsm, timer);
+}
+
+/* Remove timer from the timer list; clear timeout status */
+void fsl_otg_del_timer(struct otg_fsm *fsm, void *gtimer)
+{
+	struct fsl_otg_timer *timer = gtimer;
+	struct fsl_otg_timer *tmp_timer, *del_tmp;
+
+	list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
+		if (tmp_timer == timer)
+			list_del(&timer->list);
+}
+
+static void fsl_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
+{
+	struct fsl_otg_timer *timer;
+
+	timer = fsl_otg_get_timer(t);
+	if (!timer)
+		return;
+
+	fsl_otg_del_timer(fsm, timer);
+}
+
+/* Reset controller, not reset the bus */
+void otg_reset_controller(void)
+{
+	u32 command;
+
+	command = fsl_readl(&usb_dr_regs->usbcmd);
+	command |= (1 << 1);
+	fsl_writel(command, &usb_dr_regs->usbcmd);
+	while (fsl_readl(&usb_dr_regs->usbcmd) & (1 << 1))
+		;
+}
+
+/* Call suspend/resume routines in host driver */
+int fsl_otg_start_host(struct otg_fsm *fsm, int on)
+{
+	struct usb_otg *otg = fsm->otg;
+	struct device *dev;
+	struct fsl_otg *otg_dev =
+		container_of(otg->usb_phy, struct fsl_otg, phy);
+	u32 retval = 0;
+
+	if (!otg->host)
+		return -ENODEV;
+	dev = otg->host->controller;
+
+	/*
+	 * Update a_vbus_vld state as a_vbus_vld int is disabled
+	 * in device mode
+	 */
+	fsm->a_vbus_vld =
+		!!(fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_A_VBUS_VALID);
+	if (on) {
+		/* start fsl usb host controller */
+		if (otg_dev->host_working)
+			goto end;
+		else {
+			otg_reset_controller();
+			VDBG("host on......\n");
+			if (dev->driver->pm && dev->driver->pm->resume) {
+				retval = dev->driver->pm->resume(dev);
+				if (fsm->id) {
+					/* default-b */
+					fsl_otg_drv_vbus(fsm, 1);
+					/*
+					 * Workaround: b_host can't driver
+					 * vbus, but PP in PORTSC needs to
+					 * be 1 for host to work.
+					 * So we set drv_vbus bit in
+					 * transceiver to 0 thru ULPI.
+					 */
+					write_ulpi(0x0c, 0x20);
+				}
+			}
+
+			otg_dev->host_working = 1;
+		}
+	} else {
+		/* stop fsl usb host controller */
+		if (!otg_dev->host_working)
+			goto end;
+		else {
+			VDBG("host off......\n");
+			if (dev && dev->driver) {
+				if (dev->driver->pm && dev->driver->pm->suspend)
+					retval = dev->driver->pm->suspend(dev);
+				if (fsm->id)
+					/* default-b */
+					fsl_otg_drv_vbus(fsm, 0);
+			}
+			otg_dev->host_working = 0;
+		}
+	}
+end:
+	return retval;
+}
+
+/*
+ * Call suspend and resume function in udc driver
+ * to stop and start udc driver.
+ */
+int fsl_otg_start_gadget(struct otg_fsm *fsm, int on)
+{
+	struct usb_otg *otg = fsm->otg;
+	struct device *dev;
+
+	if (!otg->gadget || !otg->gadget->dev.parent)
+		return -ENODEV;
+
+	VDBG("gadget %s\n", on ? "on" : "off");
+	dev = otg->gadget->dev.parent;
+
+	if (on) {
+		if (dev->driver->resume)
+			dev->driver->resume(dev);
+	} else {
+		if (dev->driver->suspend)
+			dev->driver->suspend(dev, otg_suspend_state);
+	}
+
+	return 0;
+}
+
+/*
+ * Called by initialization code of host driver.  Register host controller
+ * to the OTG.  Suspend host for OTG role detection.
+ */
+static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	struct fsl_otg *otg_dev;
+
+	if (!otg)
+		return -ENODEV;
+
+	otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
+	if (otg_dev != fsl_otg_dev)
+		return -ENODEV;
+
+	otg->host = host;
+
+	otg_dev->fsm.a_bus_drop = 0;
+	otg_dev->fsm.a_bus_req = 1;
+
+	if (host) {
+		VDBG("host off......\n");
+
+		otg->host->otg_port = fsl_otg_initdata.otg_port;
+		otg->host->is_b_host = otg_dev->fsm.id;
+		/*
+		 * must leave time for hub_wq to finish its thing
+		 * before yanking the host driver out from under it,
+		 * so suspend the host after a short delay.
+		 */
+		otg_dev->host_working = 1;
+		schedule_delayed_work(&otg_dev->otg_event, 100);
+		return 0;
+	} else {
+		/* host driver going away */
+		if (!(fsl_readl(&otg_dev->dr_mem_map->otgsc) &
+		      OTGSC_STS_USB_ID)) {
+			/* Mini-A cable connected */
+			struct otg_fsm *fsm = &otg_dev->fsm;
+
+			otg->state = OTG_STATE_UNDEFINED;
+			fsm->protocol = PROTO_UNDEF;
+		}
+	}
+
+	otg_dev->host_working = 0;
+
+	otg_statemachine(&otg_dev->fsm);
+
+	return 0;
+}
+
+/* Called by initialization code of udc.  Register udc to OTG. */
+static int fsl_otg_set_peripheral(struct usb_otg *otg,
+					struct usb_gadget *gadget)
+{
+	struct fsl_otg *otg_dev;
+
+	if (!otg)
+		return -ENODEV;
+
+	otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
+	VDBG("otg_dev 0x%x\n", (int)otg_dev);
+	VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev);
+	if (otg_dev != fsl_otg_dev)
+		return -ENODEV;
+
+	if (!gadget) {
+		if (!otg->default_a)
+			otg->gadget->ops->vbus_draw(otg->gadget, 0);
+		usb_gadget_vbus_disconnect(otg->gadget);
+		otg->gadget = 0;
+		otg_dev->fsm.b_bus_req = 0;
+		otg_statemachine(&otg_dev->fsm);
+		return 0;
+	}
+
+	otg->gadget = gadget;
+	otg->gadget->is_a_peripheral = !otg_dev->fsm.id;
+
+	otg_dev->fsm.b_bus_req = 1;
+
+	/* start the gadget right away if the ID pin says Mini-B */
+	pr_debug("ID pin=%d\n", otg_dev->fsm.id);
+	if (otg_dev->fsm.id == 1) {
+		fsl_otg_start_host(&otg_dev->fsm, 0);
+		otg_drv_vbus(&otg_dev->fsm, 0);
+		fsl_otg_start_gadget(&otg_dev->fsm, 1);
+	}
+
+	return 0;
+}
+
+/*
+ * Delayed pin detect interrupt processing.
+ *
+ * When the Mini-A cable is disconnected from the board,
+ * the pin-detect interrupt happens before the disconnect
+ * interrupts for the connected device(s).  In order to
+ * process the disconnect interrupt(s) prior to switching
+ * roles, the pin-detect interrupts are delayed, and handled
+ * by this routine.
+ */
+static void fsl_otg_event(struct work_struct *work)
+{
+	struct fsl_otg *og = container_of(work, struct fsl_otg, otg_event.work);
+	struct otg_fsm *fsm = &og->fsm;
+
+	if (fsm->id) {		/* switch to gadget */
+		fsl_otg_start_host(fsm, 0);
+		otg_drv_vbus(fsm, 0);
+		fsl_otg_start_gadget(fsm, 1);
+	}
+}
+
+/* B-device start SRP */
+static int fsl_otg_start_srp(struct usb_otg *otg)
+{
+	struct fsl_otg *otg_dev;
+
+	if (!otg || otg->state != OTG_STATE_B_IDLE)
+		return -ENODEV;
+
+	otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
+	if (otg_dev != fsl_otg_dev)
+		return -ENODEV;
+
+	otg_dev->fsm.b_bus_req = 1;
+	otg_statemachine(&otg_dev->fsm);
+
+	return 0;
+}
+
+/* A_host suspend will call this function to start hnp */
+static int fsl_otg_start_hnp(struct usb_otg *otg)
+{
+	struct fsl_otg *otg_dev;
+
+	if (!otg)
+		return -ENODEV;
+
+	otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
+	if (otg_dev != fsl_otg_dev)
+		return -ENODEV;
+
+	pr_debug("start_hnp...\n");
+
+	/* clear a_bus_req to enter a_suspend state */
+	otg_dev->fsm.a_bus_req = 0;
+	otg_statemachine(&otg_dev->fsm);
+
+	return 0;
+}
+
+/*
+ * Interrupt handler.  OTG/host/peripheral share the same int line.
+ * OTG driver clears OTGSC interrupts and leaves USB interrupts
+ * intact.  It needs to have knowledge of some USB interrupts
+ * such as port change.
+ */
+irqreturn_t fsl_otg_isr(int irq, void *dev_id)
+{
+	struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm;
+	struct usb_otg *otg = ((struct fsl_otg *)dev_id)->phy.otg;
+	u32 otg_int_src, otg_sc;
+
+	otg_sc = fsl_readl(&usb_dr_regs->otgsc);
+	otg_int_src = otg_sc & OTGSC_INTSTS_MASK & (otg_sc >> 8);
+
+	/* Only clear otg interrupts */
+	fsl_writel(otg_sc, &usb_dr_regs->otgsc);
+
+	/*FIXME: ID change not generate when init to 0 */
+	fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
+	otg->default_a = (fsm->id == 0);
+
+	/* process OTG interrupts */
+	if (otg_int_src) {
+		if (otg_int_src & OTGSC_INTSTS_USB_ID) {
+			fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
+			otg->default_a = (fsm->id == 0);
+			/* clear conn information */
+			if (fsm->id)
+				fsm->b_conn = 0;
+			else
+				fsm->a_conn = 0;
+
+			if (otg->host)
+				otg->host->is_b_host = fsm->id;
+			if (otg->gadget)
+				otg->gadget->is_a_peripheral = !fsm->id;
+			VDBG("ID int (ID is %d)\n", fsm->id);
+
+			if (fsm->id) {	/* switch to gadget */
+				schedule_delayed_work(
+					&((struct fsl_otg *)dev_id)->otg_event,
+					100);
+			} else {	/* switch to host */
+				cancel_delayed_work(&
+						    ((struct fsl_otg *)dev_id)->
+						    otg_event);
+				fsl_otg_start_gadget(fsm, 0);
+				otg_drv_vbus(fsm, 1);
+				fsl_otg_start_host(fsm, 1);
+			}
+			return IRQ_HANDLED;
+		}
+	}
+	return IRQ_NONE;
+}
+
+static struct otg_fsm_ops fsl_otg_ops = {
+	.chrg_vbus = fsl_otg_chrg_vbus,
+	.drv_vbus = fsl_otg_drv_vbus,
+	.loc_conn = fsl_otg_loc_conn,
+	.loc_sof = fsl_otg_loc_sof,
+	.start_pulse = fsl_otg_start_pulse,
+
+	.add_timer = fsl_otg_fsm_add_timer,
+	.del_timer = fsl_otg_fsm_del_timer,
+
+	.start_host = fsl_otg_start_host,
+	.start_gadget = fsl_otg_start_gadget,
+};
+
+/* Initialize the global variable fsl_otg_dev and request IRQ for OTG */
+static int fsl_otg_conf(struct platform_device *pdev)
+{
+	struct fsl_otg *fsl_otg_tc;
+	int status;
+
+	if (fsl_otg_dev)
+		return 0;
+
+	/* allocate space to fsl otg device */
+	fsl_otg_tc = kzalloc(sizeof(struct fsl_otg), GFP_KERNEL);
+	if (!fsl_otg_tc)
+		return -ENOMEM;
+
+	fsl_otg_tc->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
+	if (!fsl_otg_tc->phy.otg) {
+		kfree(fsl_otg_tc);
+		return -ENOMEM;
+	}
+
+	INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event);
+
+	INIT_LIST_HEAD(&active_timers);
+	status = fsl_otg_init_timers(&fsl_otg_tc->fsm);
+	if (status) {
+		pr_info("Couldn't init OTG timers\n");
+		goto err;
+	}
+	mutex_init(&fsl_otg_tc->fsm.lock);
+
+	/* Set OTG state machine operations */
+	fsl_otg_tc->fsm.ops = &fsl_otg_ops;
+
+	/* initialize the otg structure */
+	fsl_otg_tc->phy.label = DRIVER_DESC;
+	fsl_otg_tc->phy.dev = &pdev->dev;
+
+	fsl_otg_tc->phy.otg->usb_phy = &fsl_otg_tc->phy;
+	fsl_otg_tc->phy.otg->set_host = fsl_otg_set_host;
+	fsl_otg_tc->phy.otg->set_peripheral = fsl_otg_set_peripheral;
+	fsl_otg_tc->phy.otg->start_hnp = fsl_otg_start_hnp;
+	fsl_otg_tc->phy.otg->start_srp = fsl_otg_start_srp;
+
+	fsl_otg_dev = fsl_otg_tc;
+
+	/* Store the otg transceiver */
+	status = usb_add_phy(&fsl_otg_tc->phy, USB_PHY_TYPE_USB2);
+	if (status) {
+		pr_warn(FSL_OTG_NAME ": unable to register OTG transceiver.\n");
+		goto err;
+	}
+
+	return 0;
+err:
+	fsl_otg_uninit_timers();
+	kfree(fsl_otg_tc->phy.otg);
+	kfree(fsl_otg_tc);
+	return status;
+}
+
+/* OTG Initialization */
+int usb_otg_start(struct platform_device *pdev)
+{
+	struct fsl_otg *p_otg;
+	struct usb_phy *otg_trans = usb_get_phy(USB_PHY_TYPE_USB2);
+	struct otg_fsm *fsm;
+	int status;
+	struct resource *res;
+	u32 temp;
+	struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+	p_otg = container_of(otg_trans, struct fsl_otg, phy);
+	fsm = &p_otg->fsm;
+
+	/* Initialize the state machine structure with default values */
+	SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED);
+	fsm->otg = p_otg->phy.otg;
+
+	/* We don't require predefined MEM/IRQ resource index */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENXIO;
+
+	/* We don't request_mem_region here to enable resource sharing
+	 * with host/device */
+
+	usb_dr_regs = ioremap(res->start, sizeof(struct usb_dr_mmap));
+	p_otg->dr_mem_map = (struct usb_dr_mmap *)usb_dr_regs;
+	pdata->regs = (void *)usb_dr_regs;
+
+	if (pdata->init && pdata->init(pdev) != 0)
+		return -EINVAL;
+
+#ifdef CONFIG_PPC32
+	if (pdata->big_endian_mmio) {
+		_fsl_readl = _fsl_readl_be;
+		_fsl_writel = _fsl_writel_be;
+	} else {
+		_fsl_readl = _fsl_readl_le;
+		_fsl_writel = _fsl_writel_le;
+	}
+#endif
+
+	/* request irq */
+	p_otg->irq = platform_get_irq(pdev, 0);
+	if (p_otg->irq < 0)
+		return p_otg->irq;
+	status = request_irq(p_otg->irq, fsl_otg_isr,
+				IRQF_SHARED, driver_name, p_otg);
+	if (status) {
+		dev_dbg(p_otg->phy.dev, "can't get IRQ %d, error %d\n",
+			p_otg->irq, status);
+		iounmap(p_otg->dr_mem_map);
+		kfree(p_otg->phy.otg);
+		kfree(p_otg);
+		return status;
+	}
+
+	/* stop the controller */
+	temp = fsl_readl(&p_otg->dr_mem_map->usbcmd);
+	temp &= ~USB_CMD_RUN_STOP;
+	fsl_writel(temp, &p_otg->dr_mem_map->usbcmd);
+
+	/* reset the controller */
+	temp = fsl_readl(&p_otg->dr_mem_map->usbcmd);
+	temp |= USB_CMD_CTRL_RESET;
+	fsl_writel(temp, &p_otg->dr_mem_map->usbcmd);
+
+	/* wait reset completed */
+	while (fsl_readl(&p_otg->dr_mem_map->usbcmd) & USB_CMD_CTRL_RESET)
+		;
+
+	/* configure the VBUSHS as IDLE(both host and device) */
+	temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USB_MODE_ES : 0);
+	fsl_writel(temp, &p_otg->dr_mem_map->usbmode);
+
+	/* configure PHY interface */
+	temp = fsl_readl(&p_otg->dr_mem_map->portsc);
+	temp &= ~(PORTSC_PHY_TYPE_SEL | PORTSC_PTW);
+	switch (pdata->phy_mode) {
+	case FSL_USB2_PHY_ULPI:
+		temp |= PORTSC_PTS_ULPI;
+		break;
+	case FSL_USB2_PHY_UTMI_WIDE:
+		temp |= PORTSC_PTW_16BIT;
+		fallthrough;
+	case FSL_USB2_PHY_UTMI:
+		temp |= PORTSC_PTS_UTMI;
+		fallthrough;
+	default:
+		break;
+	}
+	fsl_writel(temp, &p_otg->dr_mem_map->portsc);
+
+	if (pdata->have_sysif_regs) {
+		/* configure control enable IO output, big endian register */
+		temp = __raw_readl(&p_otg->dr_mem_map->control);
+		temp |= USB_CTRL_IOENB;
+		__raw_writel(temp, &p_otg->dr_mem_map->control);
+	}
+
+	/* disable all interrupt and clear all OTGSC status */
+	temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
+	temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK;
+	temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE;
+	fsl_writel(temp, &p_otg->dr_mem_map->otgsc);
+
+	/*
+	 * The identification (id) input is FALSE when a Mini-A plug is inserted
+	 * in the devices Mini-AB receptacle. Otherwise, this input is TRUE.
+	 * Also: record initial state of ID pin
+	 */
+	if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) {
+		p_otg->phy.otg->state = OTG_STATE_UNDEFINED;
+		p_otg->fsm.id = 1;
+	} else {
+		p_otg->phy.otg->state = OTG_STATE_A_IDLE;
+		p_otg->fsm.id = 0;
+	}
+
+	pr_debug("initial ID pin=%d\n", p_otg->fsm.id);
+
+	/* enable OTG ID pin interrupt */
+	temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
+	temp |= OTGSC_INTR_USB_ID_EN;
+	temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_INTR_1MS_TIMER_EN);
+	fsl_writel(temp, &p_otg->dr_mem_map->otgsc);
+
+	return 0;
+}
+
+static int fsl_otg_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	if (!dev_get_platdata(&pdev->dev))
+		return -ENODEV;
+
+	/* configure the OTG */
+	ret = fsl_otg_conf(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't configure OTG module\n");
+		return ret;
+	}
+
+	/* start OTG */
+	ret = usb_otg_start(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't init FSL OTG device\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+static int fsl_otg_remove(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+	usb_remove_phy(&fsl_otg_dev->phy);
+	free_irq(fsl_otg_dev->irq, fsl_otg_dev);
+
+	iounmap((void *)usb_dr_regs);
+
+	fsl_otg_uninit_timers();
+	kfree(fsl_otg_dev->phy.otg);
+	kfree(fsl_otg_dev);
+
+	if (pdata->exit)
+		pdata->exit(pdev);
+
+	return 0;
+}
+
+struct platform_driver fsl_otg_driver = {
+	.probe = fsl_otg_probe,
+	.remove = fsl_otg_remove,
+	.driver = {
+		.name = driver_name,
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(fsl_otg_driver);
+
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/phy-fsl-usb.h b/drivers/usb/phy/phy-fsl-usb.h
new file mode 100644
index 000000000..d70341ae5
--- /dev/null
+++ b/drivers/usb/phy/phy-fsl-usb.h
@@ -0,0 +1,378 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright (C) 2007,2008 Freescale Semiconductor, Inc. */
+
+#include <linux/usb/otg-fsm.h>
+#include <linux/usb/otg.h>
+#include <linux/ioctl.h>
+
+/* USB Command Register Bit Masks */
+#define USB_CMD_RUN_STOP		(0x1<<0)
+#define USB_CMD_CTRL_RESET		(0x1<<1)
+#define USB_CMD_PERIODIC_SCHEDULE_EN	(0x1<<4)
+#define USB_CMD_ASYNC_SCHEDULE_EN	(0x1<<5)
+#define USB_CMD_INT_AA_DOORBELL		(0x1<<6)
+#define USB_CMD_ASP			(0x3<<8)
+#define USB_CMD_ASYNC_SCH_PARK_EN	(0x1<<11)
+#define USB_CMD_SUTW			(0x1<<13)
+#define USB_CMD_ATDTW			(0x1<<14)
+#define USB_CMD_ITC			(0xFF<<16)
+
+/* bit 15,3,2 are frame list size */
+#define USB_CMD_FRAME_SIZE_1024		(0x0<<15 | 0x0<<2)
+#define USB_CMD_FRAME_SIZE_512		(0x0<<15 | 0x1<<2)
+#define USB_CMD_FRAME_SIZE_256		(0x0<<15 | 0x2<<2)
+#define USB_CMD_FRAME_SIZE_128		(0x0<<15 | 0x3<<2)
+#define USB_CMD_FRAME_SIZE_64		(0x1<<15 | 0x0<<2)
+#define USB_CMD_FRAME_SIZE_32		(0x1<<15 | 0x1<<2)
+#define USB_CMD_FRAME_SIZE_16		(0x1<<15 | 0x2<<2)
+#define USB_CMD_FRAME_SIZE_8		(0x1<<15 | 0x3<<2)
+
+/* bit 9-8 are async schedule park mode count */
+#define USB_CMD_ASP_00			(0x0<<8)
+#define USB_CMD_ASP_01			(0x1<<8)
+#define USB_CMD_ASP_10			(0x2<<8)
+#define USB_CMD_ASP_11			(0x3<<8)
+#define USB_CMD_ASP_BIT_POS		(8)
+
+/* bit 23-16 are interrupt threshold control */
+#define USB_CMD_ITC_NO_THRESHOLD	(0x00<<16)
+#define USB_CMD_ITC_1_MICRO_FRM		(0x01<<16)
+#define USB_CMD_ITC_2_MICRO_FRM		(0x02<<16)
+#define USB_CMD_ITC_4_MICRO_FRM		(0x04<<16)
+#define USB_CMD_ITC_8_MICRO_FRM		(0x08<<16)
+#define USB_CMD_ITC_16_MICRO_FRM	(0x10<<16)
+#define USB_CMD_ITC_32_MICRO_FRM	(0x20<<16)
+#define USB_CMD_ITC_64_MICRO_FRM	(0x40<<16)
+#define USB_CMD_ITC_BIT_POS		(16)
+
+/* USB Status Register Bit Masks */
+#define USB_STS_INT			(0x1<<0)
+#define USB_STS_ERR			(0x1<<1)
+#define USB_STS_PORT_CHANGE		(0x1<<2)
+#define USB_STS_FRM_LST_ROLL		(0x1<<3)
+#define USB_STS_SYS_ERR			(0x1<<4)
+#define USB_STS_IAA			(0x1<<5)
+#define USB_STS_RESET_RECEIVED		(0x1<<6)
+#define USB_STS_SOF			(0x1<<7)
+#define USB_STS_DCSUSPEND		(0x1<<8)
+#define USB_STS_HC_HALTED		(0x1<<12)
+#define USB_STS_RCL			(0x1<<13)
+#define USB_STS_PERIODIC_SCHEDULE	(0x1<<14)
+#define USB_STS_ASYNC_SCHEDULE		(0x1<<15)
+
+/* USB Interrupt Enable Register Bit Masks */
+#define USB_INTR_INT_EN			(0x1<<0)
+#define USB_INTR_ERR_INT_EN		(0x1<<1)
+#define USB_INTR_PC_DETECT_EN		(0x1<<2)
+#define USB_INTR_FRM_LST_ROLL_EN	(0x1<<3)
+#define USB_INTR_SYS_ERR_EN		(0x1<<4)
+#define USB_INTR_ASYN_ADV_EN		(0x1<<5)
+#define USB_INTR_RESET_EN		(0x1<<6)
+#define USB_INTR_SOF_EN			(0x1<<7)
+#define USB_INTR_DEVICE_SUSPEND		(0x1<<8)
+
+/* Device Address bit masks */
+#define USB_DEVICE_ADDRESS_MASK		(0x7F<<25)
+#define USB_DEVICE_ADDRESS_BIT_POS	(25)
+/* PORTSC  Register Bit Masks,Only one PORT in OTG mode*/
+#define PORTSC_CURRENT_CONNECT_STATUS	(0x1<<0)
+#define PORTSC_CONNECT_STATUS_CHANGE	(0x1<<1)
+#define PORTSC_PORT_ENABLE		(0x1<<2)
+#define PORTSC_PORT_EN_DIS_CHANGE	(0x1<<3)
+#define PORTSC_OVER_CURRENT_ACT		(0x1<<4)
+#define PORTSC_OVER_CUURENT_CHG		(0x1<<5)
+#define PORTSC_PORT_FORCE_RESUME	(0x1<<6)
+#define PORTSC_PORT_SUSPEND		(0x1<<7)
+#define PORTSC_PORT_RESET		(0x1<<8)
+#define PORTSC_LINE_STATUS_BITS		(0x3<<10)
+#define PORTSC_PORT_POWER		(0x1<<12)
+#define PORTSC_PORT_INDICTOR_CTRL	(0x3<<14)
+#define PORTSC_PORT_TEST_CTRL		(0xF<<16)
+#define PORTSC_WAKE_ON_CONNECT_EN	(0x1<<20)
+#define PORTSC_WAKE_ON_CONNECT_DIS	(0x1<<21)
+#define PORTSC_WAKE_ON_OVER_CURRENT	(0x1<<22)
+#define PORTSC_PHY_LOW_POWER_SPD	(0x1<<23)
+#define PORTSC_PORT_FORCE_FULL_SPEED	(0x1<<24)
+#define PORTSC_PORT_SPEED_MASK		(0x3<<26)
+#define PORTSC_TRANSCEIVER_WIDTH	(0x1<<28)
+#define PORTSC_PHY_TYPE_SEL		(0x3<<30)
+/* bit 11-10 are line status */
+#define PORTSC_LINE_STATUS_SE0		(0x0<<10)
+#define PORTSC_LINE_STATUS_JSTATE	(0x1<<10)
+#define PORTSC_LINE_STATUS_KSTATE	(0x2<<10)
+#define PORTSC_LINE_STATUS_UNDEF	(0x3<<10)
+#define PORTSC_LINE_STATUS_BIT_POS	(10)
+
+/* bit 15-14 are port indicator control */
+#define PORTSC_PIC_OFF			(0x0<<14)
+#define PORTSC_PIC_AMBER		(0x1<<14)
+#define PORTSC_PIC_GREEN		(0x2<<14)
+#define PORTSC_PIC_UNDEF		(0x3<<14)
+#define PORTSC_PIC_BIT_POS		(14)
+
+/* bit 19-16 are port test control */
+#define PORTSC_PTC_DISABLE		(0x0<<16)
+#define PORTSC_PTC_JSTATE		(0x1<<16)
+#define PORTSC_PTC_KSTATE		(0x2<<16)
+#define PORTSC_PTC_SEQNAK		(0x3<<16)
+#define PORTSC_PTC_PACKET		(0x4<<16)
+#define PORTSC_PTC_FORCE_EN		(0x5<<16)
+#define PORTSC_PTC_BIT_POS		(16)
+
+/* bit 27-26 are port speed */
+#define PORTSC_PORT_SPEED_FULL		(0x0<<26)
+#define PORTSC_PORT_SPEED_LOW		(0x1<<26)
+#define PORTSC_PORT_SPEED_HIGH		(0x2<<26)
+#define PORTSC_PORT_SPEED_UNDEF		(0x3<<26)
+#define PORTSC_SPEED_BIT_POS		(26)
+
+/* bit 28 is parallel transceiver width for UTMI interface */
+#define PORTSC_PTW			(0x1<<28)
+#define PORTSC_PTW_8BIT			(0x0<<28)
+#define PORTSC_PTW_16BIT		(0x1<<28)
+
+/* bit 31-30 are port transceiver select */
+#define PORTSC_PTS_UTMI			(0x0<<30)
+#define PORTSC_PTS_ULPI			(0x2<<30)
+#define PORTSC_PTS_FSLS_SERIAL		(0x3<<30)
+#define PORTSC_PTS_BIT_POS		(30)
+
+#define PORTSC_W1C_BITS			\
+	(PORTSC_CONNECT_STATUS_CHANGE |	\
+	 PORTSC_PORT_EN_DIS_CHANGE    |	\
+	 PORTSC_OVER_CUURENT_CHG)
+
+/* OTG Status Control Register Bit Masks */
+#define OTGSC_CTRL_VBUS_DISCHARGE	(0x1<<0)
+#define OTGSC_CTRL_VBUS_CHARGE		(0x1<<1)
+#define OTGSC_CTRL_OTG_TERMINATION	(0x1<<3)
+#define OTGSC_CTRL_DATA_PULSING		(0x1<<4)
+#define OTGSC_CTRL_ID_PULL_EN		(0x1<<5)
+#define OTGSC_HA_DATA_PULSE		(0x1<<6)
+#define OTGSC_HA_BA			(0x1<<7)
+#define OTGSC_STS_USB_ID		(0x1<<8)
+#define OTGSC_STS_A_VBUS_VALID		(0x1<<9)
+#define OTGSC_STS_A_SESSION_VALID	(0x1<<10)
+#define OTGSC_STS_B_SESSION_VALID	(0x1<<11)
+#define OTGSC_STS_B_SESSION_END		(0x1<<12)
+#define OTGSC_STS_1MS_TOGGLE		(0x1<<13)
+#define OTGSC_STS_DATA_PULSING		(0x1<<14)
+#define OTGSC_INTSTS_USB_ID		(0x1<<16)
+#define OTGSC_INTSTS_A_VBUS_VALID	(0x1<<17)
+#define OTGSC_INTSTS_A_SESSION_VALID	(0x1<<18)
+#define OTGSC_INTSTS_B_SESSION_VALID	(0x1<<19)
+#define OTGSC_INTSTS_B_SESSION_END	(0x1<<20)
+#define OTGSC_INTSTS_1MS		(0x1<<21)
+#define OTGSC_INTSTS_DATA_PULSING	(0x1<<22)
+#define OTGSC_INTR_USB_ID_EN		(0x1<<24)
+#define OTGSC_INTR_A_VBUS_VALID_EN	(0x1<<25)
+#define OTGSC_INTR_A_SESSION_VALID_EN	(0x1<<26)
+#define OTGSC_INTR_B_SESSION_VALID_EN	(0x1<<27)
+#define OTGSC_INTR_B_SESSION_END_EN	(0x1<<28)
+#define OTGSC_INTR_1MS_TIMER_EN		(0x1<<29)
+#define OTGSC_INTR_DATA_PULSING_EN	(0x1<<30)
+#define OTGSC_INTSTS_MASK		(0x00ff0000)
+
+/* USB MODE Register Bit Masks */
+#define  USB_MODE_CTRL_MODE_IDLE	(0x0<<0)
+#define  USB_MODE_CTRL_MODE_DEVICE	(0x2<<0)
+#define  USB_MODE_CTRL_MODE_HOST	(0x3<<0)
+#define  USB_MODE_CTRL_MODE_RSV		(0x1<<0)
+#define  USB_MODE_SETUP_LOCK_OFF	(0x1<<3)
+#define  USB_MODE_STREAM_DISABLE	(0x1<<4)
+#define  USB_MODE_ES			(0x1<<2) /* Endian Select */
+
+/* control Register Bit Masks */
+#define  USB_CTRL_IOENB			(0x1<<2)
+#define  USB_CTRL_ULPI_INT0EN		(0x1<<0)
+
+/* BCSR5 */
+#define BCSR5_INT_USB			(0x02)
+
+/* USB module clk cfg */
+#define SCCR_OFFS			(0xA08)
+#define SCCR_USB_CLK_DISABLE		(0x00000000)	/* USB clk disable */
+#define SCCR_USB_MPHCM_11		(0x00c00000)
+#define SCCR_USB_MPHCM_01		(0x00400000)
+#define SCCR_USB_MPHCM_10		(0x00800000)
+#define SCCR_USB_DRCM_11		(0x00300000)
+#define SCCR_USB_DRCM_01		(0x00100000)
+#define SCCR_USB_DRCM_10		(0x00200000)
+
+#define SICRL_OFFS			(0x114)
+#define SICRL_USB0			(0x40000000)
+#define SICRL_USB1			(0x20000000)
+
+#define SICRH_OFFS			(0x118)
+#define SICRH_USB_UTMI			(0x00020000)
+
+/* OTG interrupt enable bit masks */
+#define  OTGSC_INTERRUPT_ENABLE_BITS_MASK  \
+	(OTGSC_INTR_USB_ID_EN            | \
+	OTGSC_INTR_1MS_TIMER_EN		 | \
+	OTGSC_INTR_A_VBUS_VALID_EN       | \
+	OTGSC_INTR_A_SESSION_VALID_EN    | \
+	OTGSC_INTR_B_SESSION_VALID_EN    | \
+	OTGSC_INTR_B_SESSION_END_EN      | \
+	OTGSC_INTR_DATA_PULSING_EN)
+
+/* OTG interrupt status bit masks */
+#define  OTGSC_INTERRUPT_STATUS_BITS_MASK  \
+	(OTGSC_INTSTS_USB_ID          |    \
+	OTGSC_INTR_1MS_TIMER_EN       |    \
+	OTGSC_INTSTS_A_VBUS_VALID     |    \
+	OTGSC_INTSTS_A_SESSION_VALID  |    \
+	OTGSC_INTSTS_B_SESSION_VALID  |    \
+	OTGSC_INTSTS_B_SESSION_END    |    \
+	OTGSC_INTSTS_DATA_PULSING)
+
+/*
+ *  A-DEVICE timing  constants
+ */
+
+/* Wait for VBUS Rise  */
+#define TA_WAIT_VRISE	(100)	/* a_wait_vrise 100 ms, section: 6.6.5.1 */
+
+/* Wait for B-Connect */
+#define TA_WAIT_BCON	(10000)  /* a_wait_bcon > 1 sec, section: 6.6.5.2
+				  * This is only used to get out of
+				  * OTG_STATE_A_WAIT_BCON state if there was
+				  * no connection for these many milliseconds
+				  */
+
+/* A-Idle to B-Disconnect */
+/* It is necessary for this timer to be more than 750 ms because of a bug in OPT
+ * test 5.4 in which B OPT disconnects after 750 ms instead of 75ms as stated
+ * in the test description
+ */
+#define TA_AIDL_BDIS	(5000)	/* a_suspend minimum 200 ms, section: 6.6.5.3 */
+
+/* B-Idle to A-Disconnect */
+#define TA_BIDL_ADIS	(12)	/* 3 to 200 ms */
+
+/* B-device timing constants */
+
+
+/* Data-Line Pulse Time*/
+#define TB_DATA_PLS	(10)	/* b_srp_init,continue 5~10ms, section:5.3.3 */
+#define TB_DATA_PLS_MIN	(5)	/* minimum 5 ms */
+#define TB_DATA_PLS_MAX	(10)	/* maximum 10 ms */
+
+/* SRP Initiate Time  */
+#define TB_SRP_INIT	(100)	/* b_srp_init,maximum 100 ms, section:5.3.8 */
+
+/* SRP Fail Time  */
+#define TB_SRP_FAIL	(7000)	/* b_srp_init,Fail time 5~30s, section:6.8.2.2*/
+
+/* SRP result wait time */
+#define TB_SRP_WAIT	(60)
+
+/* VBus time */
+#define TB_VBUS_PLS	(30)	/* time to keep vbus pulsing asserted */
+
+/* Discharge time */
+/* This time should be less than 10ms. It varies from system to system. */
+#define TB_VBUS_DSCHRG	(8)
+
+/* A-SE0 to B-Reset  */
+#define TB_ASE0_BRST	(20)	/* b_wait_acon, mini 3.125 ms,section:6.8.2.4 */
+
+/* A bus suspend timer before we can switch to b_wait_aconn */
+#define TB_A_SUSPEND	(7)
+#define TB_BUS_RESUME	(12)
+
+/* SE0 Time Before SRP */
+#define TB_SE0_SRP	(2)	/* b_idle,minimum 2 ms, section:5.3.2 */
+
+#define SET_OTG_STATE(phy, newstate)	((phy)->otg->state = newstate)
+
+struct usb_dr_mmap {
+	/* Capability register */
+	u8 res1[256];
+	u16 caplength;		/* Capability Register Length */
+	u16 hciversion;		/* Host Controller Interface Version */
+	u32 hcsparams;		/* Host Controller Structual Parameters */
+	u32 hccparams;		/* Host Controller Capability Parameters */
+	u8 res2[20];
+	u32 dciversion;		/* Device Controller Interface Version */
+	u32 dccparams;		/* Device Controller Capability Parameters */
+	u8 res3[24];
+	/* Operation register */
+	u32 usbcmd;		/* USB Command Register */
+	u32 usbsts;		/* USB Status Register */
+	u32 usbintr;		/* USB Interrupt Enable Register */
+	u32 frindex;		/* Frame Index Register */
+	u8 res4[4];
+	u32 deviceaddr;		/* Device Address */
+	u32 endpointlistaddr;	/* Endpoint List Address Register */
+	u8 res5[4];
+	u32 burstsize;		/* Master Interface Data Burst Size Register */
+	u32 txttfilltuning;	/* Transmit FIFO Tuning Controls Register */
+	u8 res6[8];
+	u32 ulpiview;		/* ULPI register access */
+	u8 res7[12];
+	u32 configflag;		/* Configure Flag Register */
+	u32 portsc;		/* Port 1 Status and Control Register */
+	u8 res8[28];
+	u32 otgsc;		/* On-The-Go Status and Control */
+	u32 usbmode;		/* USB Mode Register */
+	u32 endptsetupstat;	/* Endpoint Setup Status Register */
+	u32 endpointprime;	/* Endpoint Initialization Register */
+	u32 endptflush;		/* Endpoint Flush Register */
+	u32 endptstatus;	/* Endpoint Status Register */
+	u32 endptcomplete;	/* Endpoint Complete Register */
+	u32 endptctrl[6];	/* Endpoint Control Registers */
+	u8 res9[552];
+	u32 snoop1;
+	u32 snoop2;
+	u32 age_cnt_thresh;	/* Age Count Threshold Register */
+	u32 pri_ctrl;		/* Priority Control Register */
+	u32 si_ctrl;		/* System Interface Control Register */
+	u8 res10[236];
+	u32 control;		/* General Purpose Control Register */
+};
+
+struct fsl_otg_timer {
+	unsigned long expires;	/* Number of count increase to timeout */
+	unsigned long count;	/* Tick counter */
+	void (*function)(unsigned long);	/* Timeout function */
+	unsigned long data;	/* Data passed to function */
+	struct list_head list;
+};
+
+inline struct fsl_otg_timer *otg_timer_initializer
+(void (*function)(unsigned long), unsigned long expires, unsigned long data)
+{
+	struct fsl_otg_timer *timer;
+
+	timer = kmalloc(sizeof(struct fsl_otg_timer), GFP_KERNEL);
+	if (!timer)
+		return NULL;
+	timer->function = function;
+	timer->expires = expires;
+	timer->data = data;
+	return timer;
+}
+
+struct fsl_otg {
+	struct usb_phy phy;
+	struct otg_fsm fsm;
+	struct usb_dr_mmap *dr_mem_map;
+	struct delayed_work otg_event;
+
+	/* used for usb host */
+	struct work_struct work_wq;
+	u8	host_working;
+
+	int irq;
+};
+
+struct fsl_otg_config {
+	u8 otg_port;
+};
+
+#define FSL_OTG_NAME		"fsl-usb2-otg"
+
+void fsl_otg_add_timer(struct otg_fsm *fsm, void *timer);
+void fsl_otg_del_timer(struct otg_fsm *fsm, void *timer);
+void fsl_otg_pulse_vbus(void);
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
new file mode 100644
index 000000000..3dc5c04e7
--- /dev/null
+++ b/drivers/usb/phy/phy-generic.c
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * NOP USB transceiver for all USB transceiver which are either built-in
+ * into USB IP or which are mostly autonomous.
+ *
+ * Copyright (C) 2009 Texas Instruments Inc
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * Current status:
+ *	This provides a "nop" transceiver for PHYs which are
+ *	autonomous such as isp1504, isp1707, etc.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/usb_phy_generic.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of.h>
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+
+#include "phy-generic.h"
+
+#define VBUS_IRQ_FLAGS \
+	(IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | \
+		IRQF_ONESHOT)
+
+struct platform_device *usb_phy_generic_register(void)
+{
+	return platform_device_register_simple("usb_phy_generic",
+			PLATFORM_DEVID_AUTO, NULL, 0);
+}
+EXPORT_SYMBOL_GPL(usb_phy_generic_register);
+
+void usb_phy_generic_unregister(struct platform_device *pdev)
+{
+	platform_device_unregister(pdev);
+}
+EXPORT_SYMBOL_GPL(usb_phy_generic_unregister);
+
+static int nop_set_suspend(struct usb_phy *x, int suspend)
+{
+	struct usb_phy_generic *nop = dev_get_drvdata(x->dev);
+
+	if (!IS_ERR(nop->clk)) {
+		if (suspend)
+			clk_disable_unprepare(nop->clk);
+		else
+			clk_prepare_enable(nop->clk);
+	}
+
+	return 0;
+}
+
+static void nop_reset(struct usb_phy_generic *nop)
+{
+	if (!nop->gpiod_reset)
+		return;
+
+	gpiod_set_value_cansleep(nop->gpiod_reset, 1);
+	usleep_range(10000, 20000);
+	gpiod_set_value_cansleep(nop->gpiod_reset, 0);
+}
+
+/* interface to regulator framework */
+static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA)
+{
+	struct regulator *vbus_draw = nop->vbus_draw;
+	int enabled;
+	int ret;
+
+	if (!vbus_draw)
+		return;
+
+	enabled = nop->vbus_draw_enabled;
+	if (mA) {
+		regulator_set_current_limit(vbus_draw, 0, 1000 * mA);
+		if (!enabled) {
+			ret = regulator_enable(vbus_draw);
+			if (ret < 0)
+				return;
+			nop->vbus_draw_enabled = 1;
+		}
+	} else {
+		if (enabled) {
+			ret = regulator_disable(vbus_draw);
+			if (ret < 0)
+				return;
+			nop->vbus_draw_enabled = 0;
+		}
+	}
+	nop->mA = mA;
+}
+
+
+static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
+{
+	struct usb_phy_generic *nop = data;
+	struct usb_otg *otg = nop->phy.otg;
+	int vbus, status;
+
+	vbus = gpiod_get_value(nop->gpiod_vbus);
+	if ((vbus ^ nop->vbus) == 0)
+		return IRQ_HANDLED;
+	nop->vbus = vbus;
+
+	if (vbus) {
+		status = USB_EVENT_VBUS;
+		otg->state = OTG_STATE_B_PERIPHERAL;
+		nop->phy.last_event = status;
+
+		/* drawing a "unit load" is *always* OK, except for OTG */
+		nop_set_vbus_draw(nop, 100);
+
+		atomic_notifier_call_chain(&nop->phy.notifier, status,
+					   otg->gadget);
+	} else {
+		nop_set_vbus_draw(nop, 0);
+
+		status = USB_EVENT_NONE;
+		otg->state = OTG_STATE_B_IDLE;
+		nop->phy.last_event = status;
+
+		atomic_notifier_call_chain(&nop->phy.notifier, status,
+					   otg->gadget);
+	}
+	return IRQ_HANDLED;
+}
+
+int usb_gen_phy_init(struct usb_phy *phy)
+{
+	struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
+	int ret;
+
+	if (!IS_ERR(nop->vcc)) {
+		if (regulator_enable(nop->vcc))
+			dev_err(phy->dev, "Failed to enable power\n");
+	}
+
+	if (!IS_ERR(nop->clk)) {
+		ret = clk_prepare_enable(nop->clk);
+		if (ret)
+			return ret;
+	}
+
+	nop_reset(nop);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_gen_phy_init);
+
+void usb_gen_phy_shutdown(struct usb_phy *phy)
+{
+	struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
+
+	gpiod_set_value_cansleep(nop->gpiod_reset, 1);
+
+	if (!IS_ERR(nop->clk))
+		clk_disable_unprepare(nop->clk);
+
+	if (!IS_ERR(nop->vcc)) {
+		if (regulator_disable(nop->vcc))
+			dev_err(phy->dev, "Failed to disable power\n");
+	}
+}
+EXPORT_SYMBOL_GPL(usb_gen_phy_shutdown);
+
+static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
+{
+	if (!otg)
+		return -ENODEV;
+
+	if (!gadget) {
+		otg->gadget = NULL;
+		return -ENODEV;
+	}
+
+	otg->gadget = gadget;
+	if (otg->state == OTG_STATE_B_PERIPHERAL)
+		atomic_notifier_call_chain(&otg->usb_phy->notifier,
+					   USB_EVENT_VBUS, otg->gadget);
+	else
+		otg->state = OTG_STATE_B_IDLE;
+	return 0;
+}
+
+static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	if (!otg)
+		return -ENODEV;
+
+	if (!host) {
+		otg->host = NULL;
+		return -ENODEV;
+	}
+
+	otg->host = host;
+	return 0;
+}
+
+int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop)
+{
+	enum usb_phy_type type = USB_PHY_TYPE_USB2;
+	int err = 0;
+
+	u32 clk_rate = 0;
+	bool needs_vcc = false, needs_clk = false;
+
+	if (dev->of_node) {
+		struct device_node *node = dev->of_node;
+
+		if (of_property_read_u32(node, "clock-frequency", &clk_rate))
+			clk_rate = 0;
+
+		needs_vcc = of_property_read_bool(node, "vcc-supply");
+		needs_clk = of_property_read_bool(node, "clocks");
+	}
+	nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
+						   GPIOD_ASIS);
+	err = PTR_ERR_OR_ZERO(nop->gpiod_reset);
+	if (!err) {
+		nop->gpiod_vbus = devm_gpiod_get_optional(dev,
+						 "vbus-detect",
+						 GPIOD_ASIS);
+		err = PTR_ERR_OR_ZERO(nop->gpiod_vbus);
+	}
+
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Error requesting RESET or VBUS GPIO\n");
+	if (nop->gpiod_reset)
+		gpiod_direction_output(nop->gpiod_reset, 1);
+
+	nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg),
+			GFP_KERNEL);
+	if (!nop->phy.otg)
+		return -ENOMEM;
+
+	nop->clk = devm_clk_get(dev, "main_clk");
+	if (IS_ERR(nop->clk)) {
+		dev_dbg(dev, "Can't get phy clock: %ld\n",
+					PTR_ERR(nop->clk));
+		if (needs_clk)
+			return PTR_ERR(nop->clk);
+	}
+
+	if (!IS_ERR(nop->clk) && clk_rate) {
+		err = clk_set_rate(nop->clk, clk_rate);
+		if (err) {
+			dev_err(dev, "Error setting clock rate\n");
+			return err;
+		}
+	}
+
+	nop->vcc = devm_regulator_get(dev, "vcc");
+	if (IS_ERR(nop->vcc)) {
+		dev_dbg(dev, "Error getting vcc regulator: %ld\n",
+					PTR_ERR(nop->vcc));
+		if (needs_vcc)
+			return -EPROBE_DEFER;
+	}
+
+	nop->vbus_draw = devm_regulator_get_exclusive(dev, "vbus");
+	if (PTR_ERR(nop->vbus_draw) == -ENODEV)
+		nop->vbus_draw = NULL;
+	if (IS_ERR(nop->vbus_draw))
+		return dev_err_probe(dev, PTR_ERR(nop->vbus_draw),
+				     "could not get vbus regulator\n");
+
+	nop->dev		= dev;
+	nop->phy.dev		= nop->dev;
+	nop->phy.label		= "nop-xceiv";
+	nop->phy.set_suspend	= nop_set_suspend;
+	nop->phy.type		= type;
+
+	nop->phy.otg->state		= OTG_STATE_UNDEFINED;
+	nop->phy.otg->usb_phy		= &nop->phy;
+	nop->phy.otg->set_host		= nop_set_host;
+	nop->phy.otg->set_peripheral	= nop_set_peripheral;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy);
+
+static int usb_phy_generic_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_phy_generic	*nop;
+	int err;
+
+	nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
+	if (!nop)
+		return -ENOMEM;
+
+	err = usb_phy_gen_create_phy(dev, nop);
+	if (err)
+		return err;
+	if (nop->gpiod_vbus) {
+		err = devm_request_threaded_irq(&pdev->dev,
+						gpiod_to_irq(nop->gpiod_vbus),
+						NULL, nop_gpio_vbus_thread,
+						VBUS_IRQ_FLAGS, "vbus_detect",
+						nop);
+		if (err) {
+			dev_err(&pdev->dev, "can't request irq %i, err: %d\n",
+				gpiod_to_irq(nop->gpiod_vbus), err);
+			return err;
+		}
+		nop->phy.otg->state = gpiod_get_value(nop->gpiod_vbus) ?
+			OTG_STATE_B_PERIPHERAL : OTG_STATE_B_IDLE;
+	}
+
+	nop->phy.init		= usb_gen_phy_init;
+	nop->phy.shutdown	= usb_gen_phy_shutdown;
+
+	err = usb_add_phy_dev(&nop->phy);
+	if (err) {
+		dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
+			err);
+		return err;
+	}
+
+	platform_set_drvdata(pdev, nop);
+
+	return 0;
+}
+
+static int usb_phy_generic_remove(struct platform_device *pdev)
+{
+	struct usb_phy_generic *nop = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&nop->phy);
+
+	return 0;
+}
+
+static const struct of_device_id nop_xceiv_dt_ids[] = {
+	{ .compatible = "usb-nop-xceiv" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids);
+
+static struct platform_driver usb_phy_generic_driver = {
+	.probe		= usb_phy_generic_probe,
+	.remove		= usb_phy_generic_remove,
+	.driver		= {
+		.name	= "usb_phy_generic",
+		.of_match_table = nop_xceiv_dt_ids,
+	},
+};
+
+static int __init usb_phy_generic_init(void)
+{
+	return platform_driver_register(&usb_phy_generic_driver);
+}
+subsys_initcall(usb_phy_generic_init);
+
+static void __exit usb_phy_generic_exit(void)
+{
+	platform_driver_unregister(&usb_phy_generic_driver);
+}
+module_exit(usb_phy_generic_exit);
+
+MODULE_ALIAS("platform:usb_phy_generic");
+MODULE_AUTHOR("Texas Instruments Inc");
+MODULE_DESCRIPTION("NOP USB Transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h
new file mode 100644
index 000000000..7ee80211a
--- /dev/null
+++ b/drivers/usb/phy/phy-generic.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _PHY_GENERIC_H_
+#define _PHY_GENERIC_H_
+
+#include <linux/usb/usb_phy_generic.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+struct usb_phy_generic {
+	struct usb_phy phy;
+	struct device *dev;
+	struct clk *clk;
+	struct regulator *vcc;
+	struct gpio_desc *gpiod_reset;
+	struct gpio_desc *gpiod_vbus;
+	struct regulator *vbus_draw;
+	bool vbus_draw_enabled;
+	unsigned long mA;
+	unsigned int vbus;
+};
+
+int usb_gen_phy_init(struct usb_phy *phy);
+void usb_gen_phy_shutdown(struct usb_phy *phy);
+
+int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop);
+
+#endif
diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c
new file mode 100644
index 000000000..f13f55307
--- /dev/null
+++ b/drivers/usb/phy/phy-gpio-vbus-usb.c
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * gpio-vbus.c - simple GPIO VBUS sensing driver for B peripheral devices
+ *
+ * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/workqueue.h>
+
+#include <linux/regulator/consumer.h>
+
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+
+
+/*
+ * A simple GPIO VBUS sensing driver for B peripheral only devices
+ * with internal transceivers. It can control a D+ pullup GPIO and
+ * a regulator to limit the current drawn from VBUS.
+ *
+ * Needs to be loaded before the UDC driver that will use it.
+ */
+struct gpio_vbus_data {
+	struct gpio_desc	*vbus_gpiod;
+	struct gpio_desc	*pullup_gpiod;
+	struct usb_phy		phy;
+	struct device          *dev;
+	struct regulator       *vbus_draw;
+	int			vbus_draw_enabled;
+	unsigned		mA;
+	struct delayed_work	work;
+	int			vbus;
+	int			irq;
+};
+
+
+/*
+ * This driver relies on "both edges" triggering.  VBUS has 100 msec to
+ * stabilize, so the peripheral controller driver may need to cope with
+ * some bouncing due to current surges (e.g. charging local capacitance)
+ * and contact chatter.
+ *
+ * REVISIT in desperate straits, toggling between rising and falling
+ * edges might be workable.
+ */
+#define VBUS_IRQ_FLAGS \
+	(IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
+
+
+/* interface to regulator framework */
+static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA)
+{
+	struct regulator *vbus_draw = gpio_vbus->vbus_draw;
+	int enabled;
+	int ret;
+
+	if (!vbus_draw)
+		return;
+
+	enabled = gpio_vbus->vbus_draw_enabled;
+	if (mA) {
+		regulator_set_current_limit(vbus_draw, 0, 1000 * mA);
+		if (!enabled) {
+			ret = regulator_enable(vbus_draw);
+			if (ret < 0)
+				return;
+			gpio_vbus->vbus_draw_enabled = 1;
+		}
+	} else {
+		if (enabled) {
+			ret = regulator_disable(vbus_draw);
+			if (ret < 0)
+				return;
+			gpio_vbus->vbus_draw_enabled = 0;
+		}
+	}
+	gpio_vbus->mA = mA;
+}
+
+static int is_vbus_powered(struct gpio_vbus_data *gpio_vbus)
+{
+	return gpiod_get_value(gpio_vbus->vbus_gpiod);
+}
+
+static void gpio_vbus_work(struct work_struct *work)
+{
+	struct gpio_vbus_data *gpio_vbus =
+		container_of(work, struct gpio_vbus_data, work.work);
+	int status, vbus;
+
+	if (!gpio_vbus->phy.otg->gadget)
+		return;
+
+	vbus = is_vbus_powered(gpio_vbus);
+	if ((vbus ^ gpio_vbus->vbus) == 0)
+		return;
+	gpio_vbus->vbus = vbus;
+
+	/* Peripheral controllers which manage the pullup themselves won't have
+	 * a pullup GPIO configured here.  If it's configured here, we'll do
+	 * what isp1301_omap::b_peripheral() does and enable the pullup here...
+	 * although that may complicate usb_gadget_{,dis}connect() support.
+	 */
+
+	if (vbus) {
+		status = USB_EVENT_VBUS;
+		gpio_vbus->phy.otg->state = OTG_STATE_B_PERIPHERAL;
+		gpio_vbus->phy.last_event = status;
+		usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget);
+
+		/* drawing a "unit load" is *always* OK, except for OTG */
+		set_vbus_draw(gpio_vbus, 100);
+
+		/* optionally enable D+ pullup */
+		if (gpio_vbus->pullup_gpiod)
+			gpiod_set_value(gpio_vbus->pullup_gpiod, 1);
+
+		atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
+					   status, gpio_vbus->phy.otg->gadget);
+		usb_phy_set_event(&gpio_vbus->phy, USB_EVENT_ENUMERATED);
+	} else {
+		/* optionally disable D+ pullup */
+		if (gpio_vbus->pullup_gpiod)
+			gpiod_set_value(gpio_vbus->pullup_gpiod, 0);
+
+		set_vbus_draw(gpio_vbus, 0);
+
+		usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget);
+		status = USB_EVENT_NONE;
+		gpio_vbus->phy.otg->state = OTG_STATE_B_IDLE;
+		gpio_vbus->phy.last_event = status;
+
+		atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
+					   status, gpio_vbus->phy.otg->gadget);
+		usb_phy_set_event(&gpio_vbus->phy, USB_EVENT_NONE);
+	}
+}
+
+/* VBUS change IRQ handler */
+static irqreturn_t gpio_vbus_irq(int irq, void *data)
+{
+	struct platform_device *pdev = data;
+	struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
+	struct usb_otg *otg = gpio_vbus->phy.otg;
+
+	dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n",
+		is_vbus_powered(gpio_vbus) ? "supplied" : "inactive",
+		otg->gadget ? otg->gadget->name : "none");
+
+	if (otg->gadget)
+		schedule_delayed_work(&gpio_vbus->work, msecs_to_jiffies(100));
+
+	return IRQ_HANDLED;
+}
+
+/* OTG transceiver interface */
+
+/* bind/unbind the peripheral controller */
+static int gpio_vbus_set_peripheral(struct usb_otg *otg,
+					struct usb_gadget *gadget)
+{
+	struct gpio_vbus_data *gpio_vbus;
+	struct platform_device *pdev;
+
+	gpio_vbus = container_of(otg->usb_phy, struct gpio_vbus_data, phy);
+	pdev = to_platform_device(gpio_vbus->dev);
+
+	if (!gadget) {
+		dev_dbg(&pdev->dev, "unregistering gadget '%s'\n",
+			otg->gadget->name);
+
+		/* optionally disable D+ pullup */
+		if (gpio_vbus->pullup_gpiod)
+			gpiod_set_value(gpio_vbus->pullup_gpiod, 0);
+
+		set_vbus_draw(gpio_vbus, 0);
+
+		usb_gadget_vbus_disconnect(otg->gadget);
+		otg->state = OTG_STATE_UNDEFINED;
+
+		otg->gadget = NULL;
+		return 0;
+	}
+
+	otg->gadget = gadget;
+	dev_dbg(&pdev->dev, "registered gadget '%s'\n", gadget->name);
+
+	/* initialize connection state */
+	gpio_vbus->vbus = 0; /* start with disconnected */
+	gpio_vbus_irq(gpio_vbus->irq, pdev);
+	return 0;
+}
+
+/* effective for B devices, ignored for A-peripheral */
+static int gpio_vbus_set_power(struct usb_phy *phy, unsigned mA)
+{
+	struct gpio_vbus_data *gpio_vbus;
+
+	gpio_vbus = container_of(phy, struct gpio_vbus_data, phy);
+
+	if (phy->otg->state == OTG_STATE_B_PERIPHERAL)
+		set_vbus_draw(gpio_vbus, mA);
+	return 0;
+}
+
+/* for non-OTG B devices: set/clear transceiver suspend mode */
+static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend)
+{
+	struct gpio_vbus_data *gpio_vbus;
+
+	gpio_vbus = container_of(phy, struct gpio_vbus_data, phy);
+
+	/* draw max 0 mA from vbus in suspend mode; or the previously
+	 * recorded amount of current if not suspended
+	 *
+	 * NOTE: high powered configs (mA > 100) may draw up to 2.5 mA
+	 * if they're wake-enabled ... we don't handle that yet.
+	 */
+	return gpio_vbus_set_power(phy, suspend ? 0 : gpio_vbus->mA);
+}
+
+/* platform driver interface */
+
+static int gpio_vbus_probe(struct platform_device *pdev)
+{
+	struct gpio_vbus_data *gpio_vbus;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	int err, irq;
+	unsigned long irqflags;
+
+	gpio_vbus = devm_kzalloc(&pdev->dev, sizeof(struct gpio_vbus_data),
+				 GFP_KERNEL);
+	if (!gpio_vbus)
+		return -ENOMEM;
+
+	gpio_vbus->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
+					  GFP_KERNEL);
+	if (!gpio_vbus->phy.otg)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, gpio_vbus);
+	gpio_vbus->dev = &pdev->dev;
+	gpio_vbus->phy.label = "gpio-vbus";
+	gpio_vbus->phy.dev = gpio_vbus->dev;
+	gpio_vbus->phy.set_power = gpio_vbus_set_power;
+	gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend;
+
+	gpio_vbus->phy.otg->state = OTG_STATE_UNDEFINED;
+	gpio_vbus->phy.otg->usb_phy = &gpio_vbus->phy;
+	gpio_vbus->phy.otg->set_peripheral = gpio_vbus_set_peripheral;
+
+	/* Look up the VBUS sensing GPIO */
+	gpio_vbus->vbus_gpiod = devm_gpiod_get(dev, "vbus", GPIOD_IN);
+	if (IS_ERR(gpio_vbus->vbus_gpiod)) {
+		err = PTR_ERR(gpio_vbus->vbus_gpiod);
+		dev_err(&pdev->dev, "can't request vbus gpio, err: %d\n", err);
+		return err;
+	}
+	gpiod_set_consumer_name(gpio_vbus->vbus_gpiod, "vbus_detect");
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res) {
+		irq = res->start;
+		irqflags = (res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
+	} else {
+		irq = gpiod_to_irq(gpio_vbus->vbus_gpiod);
+		irqflags = VBUS_IRQ_FLAGS;
+	}
+
+	gpio_vbus->irq = irq;
+
+	/*
+	 * The VBUS sensing GPIO should have a pulldown, which will normally be
+	 * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a
+	 * value the GPIO detects as active. Some systems will use comparators.
+	 * Get the optional D+ or D- pullup GPIO. If the data line pullup is
+	 * in use, initialize it to "not pulling up"
+	 */
+	gpio_vbus->pullup_gpiod = devm_gpiod_get_optional(dev, "pullup",
+							  GPIOD_OUT_LOW);
+	if (IS_ERR(gpio_vbus->pullup_gpiod)) {
+		err = PTR_ERR(gpio_vbus->pullup_gpiod);
+		dev_err(&pdev->dev, "can't request pullup gpio, err: %d\n",
+			err);
+		return err;
+	}
+	if (gpio_vbus->pullup_gpiod)
+		gpiod_set_consumer_name(gpio_vbus->pullup_gpiod, "udc_pullup");
+
+	err = devm_request_irq(&pdev->dev, irq, gpio_vbus_irq, irqflags,
+			       "vbus_detect", pdev);
+	if (err) {
+		dev_err(&pdev->dev, "can't request irq %i, err: %d\n",
+			irq, err);
+		return err;
+	}
+
+	INIT_DELAYED_WORK(&gpio_vbus->work, gpio_vbus_work);
+
+	gpio_vbus->vbus_draw = devm_regulator_get(&pdev->dev, "vbus_draw");
+	if (IS_ERR(gpio_vbus->vbus_draw)) {
+		dev_dbg(&pdev->dev, "can't get vbus_draw regulator, err: %ld\n",
+			PTR_ERR(gpio_vbus->vbus_draw));
+		gpio_vbus->vbus_draw = NULL;
+	}
+
+	/* only active when a gadget is registered */
+	err = usb_add_phy(&gpio_vbus->phy, USB_PHY_TYPE_USB2);
+	if (err) {
+		dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
+			err);
+		return err;
+	}
+
+	/* TODO: wakeup could be enabled here with device_init_wakeup(dev, 1) */
+
+	return 0;
+}
+
+static int gpio_vbus_remove(struct platform_device *pdev)
+{
+	struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
+
+	device_init_wakeup(&pdev->dev, 0);
+	cancel_delayed_work_sync(&gpio_vbus->work);
+
+	usb_remove_phy(&gpio_vbus->phy);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int gpio_vbus_pm_suspend(struct device *dev)
+{
+	struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(gpio_vbus->irq);
+
+	return 0;
+}
+
+static int gpio_vbus_pm_resume(struct device *dev)
+{
+	struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(gpio_vbus->irq);
+
+	return 0;
+}
+
+static const struct dev_pm_ops gpio_vbus_dev_pm_ops = {
+	.suspend	= gpio_vbus_pm_suspend,
+	.resume		= gpio_vbus_pm_resume,
+};
+#endif
+
+MODULE_ALIAS("platform:gpio-vbus");
+
+static struct platform_driver gpio_vbus_driver = {
+	.driver = {
+		.name  = "gpio-vbus",
+#ifdef CONFIG_PM
+		.pm = &gpio_vbus_dev_pm_ops,
+#endif
+	},
+	.probe		= gpio_vbus_probe,
+	.remove		= gpio_vbus_remove,
+};
+
+module_platform_driver(gpio_vbus_driver);
+
+MODULE_DESCRIPTION("simple GPIO controlled OTG transceiver driver");
+MODULE_AUTHOR("Philipp Zabel");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
new file mode 100644
index 000000000..e5d3f2060
--- /dev/null
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -0,0 +1,1639 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * isp1301_omap - ISP 1301 USB transceiver, talking to OMAP OTG controller
+ *
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2004 David Brownell
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/soc/ti/omap1-mux.h>
+#include <linux/soc/ti/omap1-usb.h>
+#include <linux/soc/ti/omap1-io.h>
+
+#undef VERBOSE
+
+
+#define	DRIVER_VERSION	"24 August 2004"
+#define	DRIVER_NAME	(isp1301_driver.driver.name)
+
+MODULE_DESCRIPTION("ISP1301 USB OTG Transceiver Driver");
+MODULE_LICENSE("GPL");
+
+struct isp1301 {
+	struct usb_phy		phy;
+	struct i2c_client	*client;
+	void			(*i2c_release)(struct device *dev);
+
+	int			irq_type;
+
+	u32			last_otg_ctrl;
+	unsigned		working:1;
+
+	struct timer_list	timer;
+
+	/* use keventd context to change the state for us */
+	struct work_struct	work;
+
+	unsigned long		todo;
+#		define WORK_UPDATE_ISP	0	/* update ISP from OTG */
+#		define WORK_UPDATE_OTG	1	/* update OTG from ISP */
+#		define WORK_HOST_RESUME	4	/* resume host */
+#		define WORK_TIMER	6	/* timer fired */
+#		define WORK_STOP	7	/* don't resubmit */
+};
+
+
+/* bits in OTG_CTRL */
+
+#define	OTG_XCEIV_OUTPUTS \
+	(OTG_ASESSVLD|OTG_BSESSEND|OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID)
+#define	OTG_XCEIV_INPUTS \
+	(OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID)
+#define	OTG_CTRL_BITS \
+	(OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|OTG_B_HNPEN|OTG_BUSDROP)
+	/* and OTG_PULLUP is sometimes written */
+
+#define	OTG_CTRL_MASK	(OTG_DRIVER_SEL| \
+	OTG_XCEIV_OUTPUTS|OTG_XCEIV_INPUTS| \
+	OTG_CTRL_BITS)
+
+
+/*-------------------------------------------------------------------------*/
+
+/* board-specific PM hooks */
+
+#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3)
+
+#if IS_REACHABLE(CONFIG_TPS65010)
+
+#include <linux/mfd/tps65010.h>
+
+#else
+
+static inline int tps65010_set_vbus_draw(unsigned mA)
+{
+	pr_debug("tps65010: draw %d mA (STUB)\n", mA);
+	return 0;
+}
+
+#endif
+
+static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
+{
+	int status = tps65010_set_vbus_draw(mA);
+	if (status < 0)
+		pr_debug("  VBUS %d mA error %d\n", mA, status);
+}
+
+#else
+
+static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
+{
+	/* H4 controls this by DIP switch S2.4; no soft control.
+	 * ON means the charger is always enabled.  Leave it OFF
+	 * unless the OTG port is used only in B-peripheral mode.
+	 */
+}
+
+#endif
+
+static void enable_vbus_source(struct isp1301 *isp)
+{
+	/* this board won't supply more than 8mA vbus power.
+	 * some boards can switch a 100ma "unit load" (or more).
+	 */
+}
+
+
+/* products will deliver OTG messages with LEDs, GUI, etc */
+static inline void notresponding(struct isp1301 *isp)
+{
+	printk(KERN_NOTICE "OTG device not responding.\n");
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static struct i2c_driver isp1301_driver;
+
+/* smbus apis are used for portability */
+
+static inline u8
+isp1301_get_u8(struct isp1301 *isp, u8 reg)
+{
+	return i2c_smbus_read_byte_data(isp->client, reg + 0);
+}
+
+static inline int
+isp1301_get_u16(struct isp1301 *isp, u8 reg)
+{
+	return i2c_smbus_read_word_data(isp->client, reg);
+}
+
+static inline int
+isp1301_set_bits(struct isp1301 *isp, u8 reg, u8 bits)
+{
+	return i2c_smbus_write_byte_data(isp->client, reg + 0, bits);
+}
+
+static inline int
+isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits)
+{
+	return i2c_smbus_write_byte_data(isp->client, reg + 1, bits);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* identification */
+#define	ISP1301_VENDOR_ID		0x00	/* u16 read */
+#define	ISP1301_PRODUCT_ID		0x02	/* u16 read */
+#define	ISP1301_BCD_DEVICE		0x14	/* u16 read */
+
+#define	I2C_VENDOR_ID_PHILIPS		0x04cc
+#define	I2C_PRODUCT_ID_PHILIPS_1301	0x1301
+
+/* operational registers */
+#define	ISP1301_MODE_CONTROL_1		0x04	/* u8 read, set, +1 clear */
+#	define	MC1_SPEED		(1 << 0)
+#	define	MC1_SUSPEND		(1 << 1)
+#	define	MC1_DAT_SE0		(1 << 2)
+#	define	MC1_TRANSPARENT		(1 << 3)
+#	define	MC1_BDIS_ACON_EN	(1 << 4)
+#	define	MC1_OE_INT_EN		(1 << 5)
+#	define	MC1_UART_EN		(1 << 6)
+#	define	MC1_MASK		0x7f
+#define	ISP1301_MODE_CONTROL_2		0x12	/* u8 read, set, +1 clear */
+#	define	MC2_GLOBAL_PWR_DN	(1 << 0)
+#	define	MC2_SPD_SUSP_CTRL	(1 << 1)
+#	define	MC2_BI_DI		(1 << 2)
+#	define	MC2_TRANSP_BDIR0	(1 << 3)
+#	define	MC2_TRANSP_BDIR1	(1 << 4)
+#	define	MC2_AUDIO_EN		(1 << 5)
+#	define	MC2_PSW_EN		(1 << 6)
+#	define	MC2_EN2V7		(1 << 7)
+#define	ISP1301_OTG_CONTROL_1		0x06	/* u8 read, set, +1 clear */
+#	define	OTG1_DP_PULLUP		(1 << 0)
+#	define	OTG1_DM_PULLUP		(1 << 1)
+#	define	OTG1_DP_PULLDOWN	(1 << 2)
+#	define	OTG1_DM_PULLDOWN	(1 << 3)
+#	define	OTG1_ID_PULLDOWN	(1 << 4)
+#	define	OTG1_VBUS_DRV		(1 << 5)
+#	define	OTG1_VBUS_DISCHRG	(1 << 6)
+#	define	OTG1_VBUS_CHRG		(1 << 7)
+#define	ISP1301_OTG_STATUS		0x10	/* u8 readonly */
+#	define	OTG_B_SESS_END		(1 << 6)
+#	define	OTG_B_SESS_VLD		(1 << 7)
+
+#define	ISP1301_INTERRUPT_SOURCE	0x08	/* u8 read */
+#define	ISP1301_INTERRUPT_LATCH		0x0A	/* u8 read, set, +1 clear */
+
+#define	ISP1301_INTERRUPT_FALLING	0x0C	/* u8 read, set, +1 clear */
+#define	ISP1301_INTERRUPT_RISING	0x0E	/* u8 read, set, +1 clear */
+
+/* same bitfields in all interrupt registers */
+#	define	INTR_VBUS_VLD		(1 << 0)
+#	define	INTR_SESS_VLD		(1 << 1)
+#	define	INTR_DP_HI		(1 << 2)
+#	define	INTR_ID_GND		(1 << 3)
+#	define	INTR_DM_HI		(1 << 4)
+#	define	INTR_ID_FLOAT		(1 << 5)
+#	define	INTR_BDIS_ACON		(1 << 6)
+#	define	INTR_CR_INT		(1 << 7)
+
+/*-------------------------------------------------------------------------*/
+
+static inline const char *state_name(struct isp1301 *isp)
+{
+	return usb_otg_state_string(isp->phy.otg->state);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* NOTE:  some of this ISP1301 setup is specific to H2 boards;
+ * not everything is guarded by board-specific checks, or even using
+ * omap_usb_config data to deduce MC1_DAT_SE0 and MC2_BI_DI.
+ *
+ * ALSO:  this currently doesn't use ISP1301 low-power modes
+ * while OTG is running.
+ */
+
+static void power_down(struct isp1301 *isp)
+{
+	isp->phy.otg->state = OTG_STATE_UNDEFINED;
+
+	// isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
+	isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND);
+
+	isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_ID_PULLDOWN);
+	isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
+}
+
+static void __maybe_unused power_up(struct isp1301 *isp)
+{
+	// isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
+	isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND);
+
+	/* do this only when cpu is driving transceiver,
+	 * so host won't see a low speed device...
+	 */
+	isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
+}
+
+#define	NO_HOST_SUSPEND
+
+static int host_suspend(struct isp1301 *isp)
+{
+#ifdef	NO_HOST_SUSPEND
+	return 0;
+#else
+	struct device	*dev;
+
+	if (!isp->phy.otg->host)
+		return -ENODEV;
+
+	/* Currently ASSUMES only the OTG port matters;
+	 * other ports could be active...
+	 */
+	dev = isp->phy.otg->host->controller;
+	return dev->driver->suspend(dev, 3, 0);
+#endif
+}
+
+static int host_resume(struct isp1301 *isp)
+{
+#ifdef	NO_HOST_SUSPEND
+	return 0;
+#else
+	struct device	*dev;
+
+	if (!isp->phy.otg->host)
+		return -ENODEV;
+
+	dev = isp->phy.otg->host->controller;
+	return dev->driver->resume(dev, 0);
+#endif
+}
+
+static int gadget_suspend(struct isp1301 *isp)
+{
+	isp->phy.otg->gadget->b_hnp_enable = 0;
+	isp->phy.otg->gadget->a_hnp_support = 0;
+	isp->phy.otg->gadget->a_alt_hnp_support = 0;
+	return usb_gadget_vbus_disconnect(isp->phy.otg->gadget);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define	TIMER_MINUTES	10
+#define	TIMER_JIFFIES	(TIMER_MINUTES * 60 * HZ)
+
+/* Almost all our I2C messaging comes from a work queue's task context.
+ * NOTE: guaranteeing certain response times might mean we shouldn't
+ * share keventd's work queue; a realtime task might be safest.
+ */
+static void isp1301_defer_work(struct isp1301 *isp, int work)
+{
+	int status;
+
+	if (isp && !test_and_set_bit(work, &isp->todo)) {
+		(void) get_device(&isp->client->dev);
+		status = schedule_work(&isp->work);
+		if (!status && !isp->working)
+			dev_vdbg(&isp->client->dev,
+				"work item %d may be lost\n", work);
+	}
+}
+
+/* called from irq handlers */
+static void a_idle(struct isp1301 *isp, const char *tag)
+{
+	u32 l;
+
+	if (isp->phy.otg->state == OTG_STATE_A_IDLE)
+		return;
+
+	isp->phy.otg->default_a = 1;
+	if (isp->phy.otg->host) {
+		isp->phy.otg->host->is_b_host = 0;
+		host_suspend(isp);
+	}
+	if (isp->phy.otg->gadget) {
+		isp->phy.otg->gadget->is_a_peripheral = 1;
+		gadget_suspend(isp);
+	}
+	isp->phy.otg->state = OTG_STATE_A_IDLE;
+	l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
+	omap_writel(l, OTG_CTRL);
+	isp->last_otg_ctrl = l;
+	pr_debug("  --> %s/%s\n", state_name(isp), tag);
+}
+
+/* called from irq handlers */
+static void b_idle(struct isp1301 *isp, const char *tag)
+{
+	u32 l;
+
+	if (isp->phy.otg->state == OTG_STATE_B_IDLE)
+		return;
+
+	isp->phy.otg->default_a = 0;
+	if (isp->phy.otg->host) {
+		isp->phy.otg->host->is_b_host = 1;
+		host_suspend(isp);
+	}
+	if (isp->phy.otg->gadget) {
+		isp->phy.otg->gadget->is_a_peripheral = 0;
+		gadget_suspend(isp);
+	}
+	isp->phy.otg->state = OTG_STATE_B_IDLE;
+	l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
+	omap_writel(l, OTG_CTRL);
+	isp->last_otg_ctrl = l;
+	pr_debug("  --> %s/%s\n", state_name(isp), tag);
+}
+
+static void
+dump_regs(struct isp1301 *isp, const char *label)
+{
+	u8	ctrl = isp1301_get_u8(isp, ISP1301_OTG_CONTROL_1);
+	u8	status = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
+	u8	src = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
+
+	pr_debug("otg: %06x, %s %s, otg/%02x stat/%02x.%02x\n",
+		omap_readl(OTG_CTRL), label, state_name(isp),
+		ctrl, status, src);
+	/* mode control and irq enables don't change much */
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_USB_OTG
+
+/*
+ * The OMAP OTG controller handles most of the OTG state transitions.
+ *
+ * We translate isp1301 outputs (mostly voltage comparator status) into
+ * OTG inputs; OTG outputs (mostly pullup/pulldown controls) and HNP state
+ * flags into isp1301 inputs ... and infer state transitions.
+ */
+
+#ifdef	VERBOSE
+
+static void check_state(struct isp1301 *isp, const char *tag)
+{
+	enum usb_otg_state	state = OTG_STATE_UNDEFINED;
+	u8			fsm = omap_readw(OTG_TEST) & 0x0ff;
+	unsigned		extra = 0;
+
+	switch (fsm) {
+
+	/* default-b */
+	case 0x0:
+		state = OTG_STATE_B_IDLE;
+		break;
+	case 0x3:
+	case 0x7:
+		extra = 1;
+	case 0x1:
+		state = OTG_STATE_B_PERIPHERAL;
+		break;
+	case 0x11:
+		state = OTG_STATE_B_SRP_INIT;
+		break;
+
+	/* extra dual-role default-b states */
+	case 0x12:
+	case 0x13:
+	case 0x16:
+		extra = 1;
+	case 0x17:
+		state = OTG_STATE_B_WAIT_ACON;
+		break;
+	case 0x34:
+		state = OTG_STATE_B_HOST;
+		break;
+
+	/* default-a */
+	case 0x36:
+		state = OTG_STATE_A_IDLE;
+		break;
+	case 0x3c:
+		state = OTG_STATE_A_WAIT_VFALL;
+		break;
+	case 0x7d:
+		state = OTG_STATE_A_VBUS_ERR;
+		break;
+	case 0x9e:
+	case 0x9f:
+		extra = 1;
+	case 0x89:
+		state = OTG_STATE_A_PERIPHERAL;
+		break;
+	case 0xb7:
+		state = OTG_STATE_A_WAIT_VRISE;
+		break;
+	case 0xb8:
+		state = OTG_STATE_A_WAIT_BCON;
+		break;
+	case 0xb9:
+		state = OTG_STATE_A_HOST;
+		break;
+	case 0xba:
+		state = OTG_STATE_A_SUSPEND;
+		break;
+	default:
+		break;
+	}
+	if (isp->phy.otg->state == state && !extra)
+		return;
+	pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag,
+		usb_otg_state_string(state), fsm, state_name(isp),
+		omap_readl(OTG_CTRL));
+}
+
+#else
+
+static inline void check_state(struct isp1301 *isp, const char *tag) { }
+
+#endif
+
+/* outputs from ISP1301_INTERRUPT_SOURCE */
+static void update_otg1(struct isp1301 *isp, u8 int_src)
+{
+	u32	otg_ctrl;
+
+	otg_ctrl = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
+	otg_ctrl &= ~OTG_XCEIV_INPUTS;
+	otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD);
+
+	if (int_src & INTR_SESS_VLD)
+		otg_ctrl |= OTG_ASESSVLD;
+	else if (isp->phy.otg->state == OTG_STATE_A_WAIT_VFALL) {
+		a_idle(isp, "vfall");
+		otg_ctrl &= ~OTG_CTRL_BITS;
+	}
+	if (int_src & INTR_VBUS_VLD)
+		otg_ctrl |= OTG_VBUSVLD;
+	if (int_src & INTR_ID_GND) {		/* default-A */
+		if (isp->phy.otg->state == OTG_STATE_B_IDLE
+				|| isp->phy.otg->state
+					== OTG_STATE_UNDEFINED) {
+			a_idle(isp, "init");
+			return;
+		}
+	} else {				/* default-B */
+		otg_ctrl |= OTG_ID;
+		if (isp->phy.otg->state == OTG_STATE_A_IDLE
+			|| isp->phy.otg->state == OTG_STATE_UNDEFINED) {
+			b_idle(isp, "init");
+			return;
+		}
+	}
+	omap_writel(otg_ctrl, OTG_CTRL);
+}
+
+/* outputs from ISP1301_OTG_STATUS */
+static void update_otg2(struct isp1301 *isp, u8 otg_status)
+{
+	u32	otg_ctrl;
+
+	otg_ctrl = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
+	otg_ctrl &= ~OTG_XCEIV_INPUTS;
+	otg_ctrl &= ~(OTG_BSESSVLD | OTG_BSESSEND);
+	if (otg_status & OTG_B_SESS_VLD)
+		otg_ctrl |= OTG_BSESSVLD;
+	else if (otg_status & OTG_B_SESS_END)
+		otg_ctrl |= OTG_BSESSEND;
+	omap_writel(otg_ctrl, OTG_CTRL);
+}
+
+/* inputs going to ISP1301 */
+static void otg_update_isp(struct isp1301 *isp)
+{
+	u32	otg_ctrl, otg_change;
+	u8	set = OTG1_DM_PULLDOWN, clr = OTG1_DM_PULLUP;
+
+	otg_ctrl = omap_readl(OTG_CTRL);
+	otg_change = otg_ctrl ^ isp->last_otg_ctrl;
+	isp->last_otg_ctrl = otg_ctrl;
+	otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS;
+
+	switch (isp->phy.otg->state) {
+	case OTG_STATE_B_IDLE:
+	case OTG_STATE_B_PERIPHERAL:
+	case OTG_STATE_B_SRP_INIT:
+		if (!(otg_ctrl & OTG_PULLUP)) {
+			// if (otg_ctrl & OTG_B_HNPEN) {
+			if (isp->phy.otg->gadget->b_hnp_enable) {
+				isp->phy.otg->state = OTG_STATE_B_WAIT_ACON;
+				pr_debug("  --> b_wait_acon\n");
+			}
+			goto pulldown;
+		}
+pullup:
+		set |= OTG1_DP_PULLUP;
+		clr |= OTG1_DP_PULLDOWN;
+		break;
+	case OTG_STATE_A_SUSPEND:
+	case OTG_STATE_A_PERIPHERAL:
+		if (otg_ctrl & OTG_PULLUP)
+			goto pullup;
+		fallthrough;
+	// case OTG_STATE_B_WAIT_ACON:
+	default:
+pulldown:
+		set |= OTG1_DP_PULLDOWN;
+		clr |= OTG1_DP_PULLUP;
+		break;
+	}
+
+#	define toggle(OTG,ISP) do { \
+		if (otg_ctrl & OTG) set |= ISP; \
+		else clr |= ISP; \
+		} while (0)
+
+	if (!(isp->phy.otg->host))
+		otg_ctrl &= ~OTG_DRV_VBUS;
+
+	switch (isp->phy.otg->state) {
+	case OTG_STATE_A_SUSPEND:
+		if (otg_ctrl & OTG_DRV_VBUS) {
+			set |= OTG1_VBUS_DRV;
+			break;
+		}
+		/* HNP failed for some reason (A_AIDL_BDIS timeout) */
+		notresponding(isp);
+
+		fallthrough;
+	case OTG_STATE_A_VBUS_ERR:
+		isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
+		pr_debug("  --> a_wait_vfall\n");
+		fallthrough;
+	case OTG_STATE_A_WAIT_VFALL:
+		/* FIXME usbcore thinks port power is still on ... */
+		clr |= OTG1_VBUS_DRV;
+		break;
+	case OTG_STATE_A_IDLE:
+		if (otg_ctrl & OTG_DRV_VBUS) {
+			isp->phy.otg->state = OTG_STATE_A_WAIT_VRISE;
+			pr_debug("  --> a_wait_vrise\n");
+		}
+		fallthrough;
+	default:
+		toggle(OTG_DRV_VBUS, OTG1_VBUS_DRV);
+	}
+
+	toggle(OTG_PU_VBUS, OTG1_VBUS_CHRG);
+	toggle(OTG_PD_VBUS, OTG1_VBUS_DISCHRG);
+
+#	undef toggle
+
+	isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, set);
+	isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, clr);
+
+	/* HNP switch to host or peripheral; and SRP */
+	if (otg_change & OTG_PULLUP) {
+		u32 l;
+
+		switch (isp->phy.otg->state) {
+		case OTG_STATE_B_IDLE:
+			if (clr & OTG1_DP_PULLUP)
+				break;
+			isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
+			pr_debug("  --> b_peripheral\n");
+			break;
+		case OTG_STATE_A_SUSPEND:
+			if (clr & OTG1_DP_PULLUP)
+				break;
+			isp->phy.otg->state = OTG_STATE_A_PERIPHERAL;
+			pr_debug("  --> a_peripheral\n");
+			break;
+		default:
+			break;
+		}
+		l = omap_readl(OTG_CTRL);
+		l |= OTG_PULLUP;
+		omap_writel(l, OTG_CTRL);
+	}
+
+	check_state(isp, __func__);
+	dump_regs(isp, "otg->isp1301");
+}
+
+static irqreturn_t omap_otg_irq(int irq, void *_isp)
+{
+	u16		otg_irq = omap_readw(OTG_IRQ_SRC);
+	u32		otg_ctrl;
+	int		ret = IRQ_NONE;
+	struct isp1301	*isp = _isp;
+	struct usb_otg	*otg = isp->phy.otg;
+
+	/* update ISP1301 transceiver from OTG controller */
+	if (otg_irq & OPRT_CHG) {
+		omap_writew(OPRT_CHG, OTG_IRQ_SRC);
+		isp1301_defer_work(isp, WORK_UPDATE_ISP);
+		ret = IRQ_HANDLED;
+
+	/* SRP to become b_peripheral failed */
+	} else if (otg_irq & B_SRP_TMROUT) {
+		pr_debug("otg: B_SRP_TIMEOUT, %06x\n", omap_readl(OTG_CTRL));
+		notresponding(isp);
+
+		/* gadget drivers that care should monitor all kinds of
+		 * remote wakeup (SRP, normal) using their own timer
+		 * to give "check cable and A-device" messages.
+		 */
+		if (isp->phy.otg->state == OTG_STATE_B_SRP_INIT)
+			b_idle(isp, "srp_timeout");
+
+		omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC);
+		ret = IRQ_HANDLED;
+
+	/* HNP to become b_host failed */
+	} else if (otg_irq & B_HNP_FAIL) {
+		pr_debug("otg: %s B_HNP_FAIL, %06x\n",
+				state_name(isp), omap_readl(OTG_CTRL));
+		notresponding(isp);
+
+		otg_ctrl = omap_readl(OTG_CTRL);
+		otg_ctrl |= OTG_BUSDROP;
+		otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
+		omap_writel(otg_ctrl, OTG_CTRL);
+
+		/* subset of b_peripheral()... */
+		isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
+		pr_debug("  --> b_peripheral\n");
+
+		omap_writew(B_HNP_FAIL, OTG_IRQ_SRC);
+		ret = IRQ_HANDLED;
+
+	/* detect SRP from B-device ... */
+	} else if (otg_irq & A_SRP_DETECT) {
+		pr_debug("otg: %s SRP_DETECT, %06x\n",
+				state_name(isp), omap_readl(OTG_CTRL));
+
+		isp1301_defer_work(isp, WORK_UPDATE_OTG);
+		switch (isp->phy.otg->state) {
+		case OTG_STATE_A_IDLE:
+			if (!otg->host)
+				break;
+			isp1301_defer_work(isp, WORK_HOST_RESUME);
+			otg_ctrl = omap_readl(OTG_CTRL);
+			otg_ctrl |= OTG_A_BUSREQ;
+			otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ)
+					& ~OTG_XCEIV_INPUTS
+					& OTG_CTRL_MASK;
+			omap_writel(otg_ctrl, OTG_CTRL);
+			break;
+		default:
+			break;
+		}
+
+		omap_writew(A_SRP_DETECT, OTG_IRQ_SRC);
+		ret = IRQ_HANDLED;
+
+	/* timer expired:  T(a_wait_bcon) and maybe T(a_wait_vrise)
+	 * we don't track them separately
+	 */
+	} else if (otg_irq & A_REQ_TMROUT) {
+		otg_ctrl = omap_readl(OTG_CTRL);
+		pr_info("otg: BCON_TMOUT from %s, %06x\n",
+				state_name(isp), otg_ctrl);
+		notresponding(isp);
+
+		otg_ctrl |= OTG_BUSDROP;
+		otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
+		omap_writel(otg_ctrl, OTG_CTRL);
+		isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
+
+		omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC);
+		ret = IRQ_HANDLED;
+
+	/* A-supplied voltage fell too low; overcurrent */
+	} else if (otg_irq & A_VBUS_ERR) {
+		otg_ctrl = omap_readl(OTG_CTRL);
+		printk(KERN_ERR "otg: %s, VBUS_ERR %04x ctrl %06x\n",
+			state_name(isp), otg_irq, otg_ctrl);
+
+		otg_ctrl |= OTG_BUSDROP;
+		otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
+		omap_writel(otg_ctrl, OTG_CTRL);
+		isp->phy.otg->state = OTG_STATE_A_VBUS_ERR;
+
+		omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
+		ret = IRQ_HANDLED;
+
+	/* switch driver; the transceiver code activates it,
+	 * ungating the udc clock or resuming OHCI.
+	 */
+	} else if (otg_irq & DRIVER_SWITCH) {
+		int	kick = 0;
+
+		otg_ctrl = omap_readl(OTG_CTRL);
+		printk(KERN_NOTICE "otg: %s, SWITCH to %s, ctrl %06x\n",
+				state_name(isp),
+				(otg_ctrl & OTG_DRIVER_SEL)
+					? "gadget" : "host",
+				otg_ctrl);
+		isp1301_defer_work(isp, WORK_UPDATE_ISP);
+
+		/* role is peripheral */
+		if (otg_ctrl & OTG_DRIVER_SEL) {
+			switch (isp->phy.otg->state) {
+			case OTG_STATE_A_IDLE:
+				b_idle(isp, __func__);
+				break;
+			default:
+				break;
+			}
+			isp1301_defer_work(isp, WORK_UPDATE_ISP);
+
+		/* role is host */
+		} else {
+			if (!(otg_ctrl & OTG_ID)) {
+				otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
+				omap_writel(otg_ctrl | OTG_A_BUSREQ, OTG_CTRL);
+			}
+
+			if (otg->host) {
+				switch (isp->phy.otg->state) {
+				case OTG_STATE_B_WAIT_ACON:
+					isp->phy.otg->state = OTG_STATE_B_HOST;
+					pr_debug("  --> b_host\n");
+					kick = 1;
+					break;
+				case OTG_STATE_A_WAIT_BCON:
+					isp->phy.otg->state = OTG_STATE_A_HOST;
+					pr_debug("  --> a_host\n");
+					break;
+				case OTG_STATE_A_PERIPHERAL:
+					isp->phy.otg->state = OTG_STATE_A_WAIT_BCON;
+					pr_debug("  --> a_wait_bcon\n");
+					break;
+				default:
+					break;
+				}
+				isp1301_defer_work(isp, WORK_HOST_RESUME);
+			}
+		}
+
+		omap_writew(DRIVER_SWITCH, OTG_IRQ_SRC);
+		ret = IRQ_HANDLED;
+
+		if (kick)
+			usb_bus_start_enum(otg->host, otg->host->otg_port);
+	}
+
+	check_state(isp, __func__);
+	return ret;
+}
+
+static struct platform_device *otg_dev;
+
+static int isp1301_otg_init(struct isp1301 *isp)
+{
+	u32 l;
+
+	if (!otg_dev)
+		return -ENODEV;
+
+	dump_regs(isp, __func__);
+	/* some of these values are board-specific... */
+	l = omap_readl(OTG_SYSCON_2);
+	l |= OTG_EN
+		/* for B-device: */
+		| SRP_GPDATA		/* 9msec Bdev D+ pulse */
+		| SRP_GPDVBUS		/* discharge after VBUS pulse */
+		// | (3 << 24)		/* 2msec VBUS pulse */
+		/* for A-device: */
+		| (0 << 20)		/* 200ms nominal A_WAIT_VRISE timer */
+		| SRP_DPW		/* detect 167+ns SRP pulses */
+		| SRP_DATA | SRP_VBUS	/* accept both kinds of SRP pulse */
+		;
+	omap_writel(l, OTG_SYSCON_2);
+
+	update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE));
+	update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS));
+
+	check_state(isp, __func__);
+	pr_debug("otg: %s, %s %06x\n",
+			state_name(isp), __func__, omap_readl(OTG_CTRL));
+
+	omap_writew(DRIVER_SWITCH | OPRT_CHG
+			| B_SRP_TMROUT | B_HNP_FAIL
+			| A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT, OTG_IRQ_EN);
+
+	l = omap_readl(OTG_SYSCON_2);
+	l |= OTG_EN;
+	omap_writel(l, OTG_SYSCON_2);
+
+	return 0;
+}
+
+static int otg_probe(struct platform_device *dev)
+{
+	// struct omap_usb_config *config = dev->platform_data;
+
+	otg_dev = dev;
+	return 0;
+}
+
+static int otg_remove(struct platform_device *dev)
+{
+	otg_dev = NULL;
+	return 0;
+}
+
+static struct platform_driver omap_otg_driver = {
+	.probe		= otg_probe,
+	.remove		= otg_remove,
+	.driver		= {
+		.name	= "omap_otg",
+	},
+};
+
+static int otg_bind(struct isp1301 *isp)
+{
+	int	status;
+
+	if (otg_dev)
+		return -EBUSY;
+
+	status = platform_driver_register(&omap_otg_driver);
+	if (status < 0)
+		return status;
+
+	if (otg_dev)
+		status = request_irq(otg_dev->resource[1].start, omap_otg_irq,
+				0, DRIVER_NAME, isp);
+	else
+		status = -ENODEV;
+
+	if (status < 0)
+		platform_driver_unregister(&omap_otg_driver);
+	return status;
+}
+
+static void otg_unbind(struct isp1301 *isp)
+{
+	if (!otg_dev)
+		return;
+	free_irq(otg_dev->resource[1].start, isp);
+}
+
+#else
+
+/* OTG controller isn't clocked */
+
+#endif	/* CONFIG_USB_OTG */
+
+/*-------------------------------------------------------------------------*/
+
+static void b_peripheral(struct isp1301 *isp)
+{
+	u32 l;
+
+	l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
+	omap_writel(l, OTG_CTRL);
+
+	usb_gadget_vbus_connect(isp->phy.otg->gadget);
+
+#ifdef	CONFIG_USB_OTG
+	enable_vbus_draw(isp, 8);
+	otg_update_isp(isp);
+#else
+	enable_vbus_draw(isp, 100);
+	/* UDC driver just set OTG_BSESSVLD */
+	isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLUP);
+	isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLDOWN);
+	isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
+	pr_debug("  --> b_peripheral\n");
+	dump_regs(isp, "2periph");
+#endif
+}
+
+static void isp_update_otg(struct isp1301 *isp, u8 stat)
+{
+	struct usb_otg		*otg = isp->phy.otg;
+	u8			isp_stat, isp_bstat;
+	enum usb_otg_state	state = isp->phy.otg->state;
+
+	if (stat & INTR_BDIS_ACON)
+		pr_debug("OTG:  BDIS_ACON, %s\n", state_name(isp));
+
+	/* start certain state transitions right away */
+	isp_stat = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
+	if (isp_stat & INTR_ID_GND) {
+		if (otg->default_a) {
+			switch (state) {
+			case OTG_STATE_B_IDLE:
+				a_idle(isp, "idle");
+				fallthrough;
+			case OTG_STATE_A_IDLE:
+				enable_vbus_source(isp);
+				fallthrough;
+			case OTG_STATE_A_WAIT_VRISE:
+				/* we skip over OTG_STATE_A_WAIT_BCON, since
+				 * the HC will transition to A_HOST (or
+				 * A_SUSPEND!) without our noticing except
+				 * when HNP is used.
+				 */
+				if (isp_stat & INTR_VBUS_VLD)
+					isp->phy.otg->state = OTG_STATE_A_HOST;
+				break;
+			case OTG_STATE_A_WAIT_VFALL:
+				if (!(isp_stat & INTR_SESS_VLD))
+					a_idle(isp, "vfell");
+				break;
+			default:
+				if (!(isp_stat & INTR_VBUS_VLD))
+					isp->phy.otg->state = OTG_STATE_A_VBUS_ERR;
+				break;
+			}
+			isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
+		} else {
+			switch (state) {
+			case OTG_STATE_B_PERIPHERAL:
+			case OTG_STATE_B_HOST:
+			case OTG_STATE_B_WAIT_ACON:
+				usb_gadget_vbus_disconnect(otg->gadget);
+				break;
+			default:
+				break;
+			}
+			if (state != OTG_STATE_A_IDLE)
+				a_idle(isp, "id");
+			if (otg->host && state == OTG_STATE_A_IDLE)
+				isp1301_defer_work(isp, WORK_HOST_RESUME);
+			isp_bstat = 0;
+		}
+	} else {
+		u32 l;
+
+		/* if user unplugged mini-A end of cable,
+		 * don't bypass A_WAIT_VFALL.
+		 */
+		if (otg->default_a) {
+			switch (state) {
+			default:
+				isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
+				break;
+			case OTG_STATE_A_WAIT_VFALL:
+				state = OTG_STATE_A_IDLE;
+				/* hub_wq may take a while to notice and
+				 * handle this disconnect, so don't go
+				 * to B_IDLE quite yet.
+				 */
+				break;
+			case OTG_STATE_A_IDLE:
+				host_suspend(isp);
+				isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1,
+						MC1_BDIS_ACON_EN);
+				isp->phy.otg->state = OTG_STATE_B_IDLE;
+				l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
+				l &= ~OTG_CTRL_BITS;
+				omap_writel(l, OTG_CTRL);
+				break;
+			case OTG_STATE_B_IDLE:
+				break;
+			}
+		}
+		isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
+
+		switch (isp->phy.otg->state) {
+		case OTG_STATE_B_PERIPHERAL:
+		case OTG_STATE_B_WAIT_ACON:
+		case OTG_STATE_B_HOST:
+			if (likely(isp_bstat & OTG_B_SESS_VLD))
+				break;
+			enable_vbus_draw(isp, 0);
+#ifndef	CONFIG_USB_OTG
+			/* UDC driver will clear OTG_BSESSVLD */
+			isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1,
+						OTG1_DP_PULLDOWN);
+			isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1,
+						OTG1_DP_PULLUP);
+			dump_regs(isp, __func__);
+#endif
+			fallthrough;
+		case OTG_STATE_B_SRP_INIT:
+			b_idle(isp, __func__);
+			l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
+			omap_writel(l, OTG_CTRL);
+			fallthrough;
+		case OTG_STATE_B_IDLE:
+			if (otg->gadget && (isp_bstat & OTG_B_SESS_VLD)) {
+#ifdef	CONFIG_USB_OTG
+				update_otg1(isp, isp_stat);
+				update_otg2(isp, isp_bstat);
+#endif
+				b_peripheral(isp);
+			} else if (!(isp_stat & (INTR_VBUS_VLD|INTR_SESS_VLD)))
+				isp_bstat |= OTG_B_SESS_END;
+			break;
+		case OTG_STATE_A_WAIT_VFALL:
+			break;
+		default:
+			pr_debug("otg: unsupported b-device %s\n",
+				state_name(isp));
+			break;
+		}
+	}
+
+	if (state != isp->phy.otg->state)
+		pr_debug("  isp, %s -> %s\n",
+				usb_otg_state_string(state), state_name(isp));
+
+#ifdef	CONFIG_USB_OTG
+	/* update the OTG controller state to match the isp1301; may
+	 * trigger OPRT_CHG irqs for changes going to the isp1301.
+	 */
+	update_otg1(isp, isp_stat);
+	update_otg2(isp, isp_bstat);
+	check_state(isp, __func__);
+#endif
+
+	dump_regs(isp, "isp1301->otg");
+}
+
+/*-------------------------------------------------------------------------*/
+
+static u8 isp1301_clear_latch(struct isp1301 *isp)
+{
+	u8 latch = isp1301_get_u8(isp, ISP1301_INTERRUPT_LATCH);
+	isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, latch);
+	return latch;
+}
+
+static void
+isp1301_work(struct work_struct *work)
+{
+	struct isp1301	*isp = container_of(work, struct isp1301, work);
+	int		stop;
+
+	/* implicit lock:  we're the only task using this device */
+	isp->working = 1;
+	do {
+		stop = test_bit(WORK_STOP, &isp->todo);
+
+#ifdef	CONFIG_USB_OTG
+		/* transfer state from otg engine to isp1301 */
+		if (test_and_clear_bit(WORK_UPDATE_ISP, &isp->todo)) {
+			otg_update_isp(isp);
+			put_device(&isp->client->dev);
+		}
+#endif
+		/* transfer state from isp1301 to otg engine */
+		if (test_and_clear_bit(WORK_UPDATE_OTG, &isp->todo)) {
+			u8		stat = isp1301_clear_latch(isp);
+
+			isp_update_otg(isp, stat);
+			put_device(&isp->client->dev);
+		}
+
+		if (test_and_clear_bit(WORK_HOST_RESUME, &isp->todo)) {
+			u32	otg_ctrl;
+
+			/*
+			 * skip A_WAIT_VRISE; hc transitions invisibly
+			 * skip A_WAIT_BCON; same.
+			 */
+			switch (isp->phy.otg->state) {
+			case OTG_STATE_A_WAIT_BCON:
+			case OTG_STATE_A_WAIT_VRISE:
+				isp->phy.otg->state = OTG_STATE_A_HOST;
+				pr_debug("  --> a_host\n");
+				otg_ctrl = omap_readl(OTG_CTRL);
+				otg_ctrl |= OTG_A_BUSREQ;
+				otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ)
+						& OTG_CTRL_MASK;
+				omap_writel(otg_ctrl, OTG_CTRL);
+				break;
+			case OTG_STATE_B_WAIT_ACON:
+				isp->phy.otg->state = OTG_STATE_B_HOST;
+				pr_debug("  --> b_host (acon)\n");
+				break;
+			case OTG_STATE_B_HOST:
+			case OTG_STATE_B_IDLE:
+			case OTG_STATE_A_IDLE:
+				break;
+			default:
+				pr_debug("  host resume in %s\n",
+						state_name(isp));
+			}
+			host_resume(isp);
+			// mdelay(10);
+			put_device(&isp->client->dev);
+		}
+
+		if (test_and_clear_bit(WORK_TIMER, &isp->todo)) {
+#ifdef	VERBOSE
+			dump_regs(isp, "timer");
+			if (!stop)
+				mod_timer(&isp->timer, jiffies + TIMER_JIFFIES);
+#endif
+			put_device(&isp->client->dev);
+		}
+
+		if (isp->todo)
+			dev_vdbg(&isp->client->dev,
+				"work done, todo = 0x%lx\n",
+				isp->todo);
+		if (stop) {
+			dev_dbg(&isp->client->dev, "stop\n");
+			break;
+		}
+	} while (isp->todo);
+	isp->working = 0;
+}
+
+static irqreturn_t isp1301_irq(int irq, void *isp)
+{
+	isp1301_defer_work(isp, WORK_UPDATE_OTG);
+	return IRQ_HANDLED;
+}
+
+static void isp1301_timer(struct timer_list *t)
+{
+	struct isp1301 *isp = from_timer(isp, t, timer);
+
+	isp1301_defer_work(isp, WORK_TIMER);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void isp1301_release(struct device *dev)
+{
+	struct isp1301	*isp;
+
+	isp = dev_get_drvdata(dev);
+
+	/* FIXME -- not with a "new style" driver, it doesn't!! */
+
+	/* ugly -- i2c hijacks our memory hook to wait_for_completion() */
+	if (isp->i2c_release)
+		isp->i2c_release(dev);
+	kfree(isp->phy.otg);
+	kfree (isp);
+}
+
+static struct isp1301 *the_transceiver;
+
+static void isp1301_remove(struct i2c_client *i2c)
+{
+	struct isp1301	*isp;
+
+	isp = i2c_get_clientdata(i2c);
+
+	isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0);
+	isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0);
+	free_irq(i2c->irq, isp);
+#ifdef	CONFIG_USB_OTG
+	otg_unbind(isp);
+#endif
+	set_bit(WORK_STOP, &isp->todo);
+	del_timer_sync(&isp->timer);
+	flush_work(&isp->work);
+
+	put_device(&i2c->dev);
+	the_transceiver = NULL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* NOTE:  three modes are possible here, only one of which
+ * will be standards-conformant on any given system:
+ *
+ *  - OTG mode (dual-role), required if there's a Mini-AB connector
+ *  - HOST mode, for when there's one or more A (host) connectors
+ *  - DEVICE mode, for when there's a B/Mini-B (device) connector
+ *
+ * As a rule, you won't have an isp1301 chip unless it's there to
+ * support the OTG mode.  Other modes help testing USB controllers
+ * in isolation from (full) OTG support, or maybe so later board
+ * revisions can help to support those feature.
+ */
+
+#ifdef	CONFIG_USB_OTG
+
+static int isp1301_otg_enable(struct isp1301 *isp)
+{
+	power_up(isp);
+	isp1301_otg_init(isp);
+
+	/* NOTE:  since we don't change this, this provides
+	 * a few more interrupts than are strictly needed.
+	 */
+	isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
+		INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
+	isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
+		INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
+
+	dev_info(&isp->client->dev, "ready for dual-role USB ...\n");
+
+	return 0;
+}
+
+#endif
+
+/* add or disable the host device+driver */
+static int
+isp1301_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	struct isp1301	*isp = container_of(otg->usb_phy, struct isp1301, phy);
+
+	if (isp != the_transceiver)
+		return -ENODEV;
+
+	if (!host) {
+		omap_writew(0, OTG_IRQ_EN);
+		power_down(isp);
+		otg->host = NULL;
+		return 0;
+	}
+
+#ifdef	CONFIG_USB_OTG
+	otg->host = host;
+	dev_dbg(&isp->client->dev, "registered host\n");
+	host_suspend(isp);
+	if (otg->gadget)
+		return isp1301_otg_enable(isp);
+	return 0;
+
+#elif !IS_ENABLED(CONFIG_USB_OMAP)
+	// FIXME update its refcount
+	otg->host = host;
+
+	power_up(isp);
+
+	if (machine_is_omap_h2())
+		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
+
+	dev_info(&isp->client->dev, "A-Host sessions ok\n");
+	isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
+		INTR_ID_GND);
+	isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
+		INTR_ID_GND);
+
+	/* If this has a Mini-AB connector, this mode is highly
+	 * nonstandard ... but can be handy for testing, especially with
+	 * the Mini-A end of an OTG cable.  (Or something nonstandard
+	 * like MiniB-to-StandardB, maybe built with a gender mender.)
+	 */
+	isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_VBUS_DRV);
+
+	dump_regs(isp, __func__);
+
+	return 0;
+
+#else
+	dev_dbg(&isp->client->dev, "host sessions not allowed\n");
+	return -EINVAL;
+#endif
+
+}
+
+static int
+isp1301_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
+{
+	struct isp1301	*isp = container_of(otg->usb_phy, struct isp1301, phy);
+
+	if (isp != the_transceiver)
+		return -ENODEV;
+
+	if (!gadget) {
+		omap_writew(0, OTG_IRQ_EN);
+		if (!otg->default_a)
+			enable_vbus_draw(isp, 0);
+		usb_gadget_vbus_disconnect(otg->gadget);
+		otg->gadget = NULL;
+		power_down(isp);
+		return 0;
+	}
+
+#ifdef	CONFIG_USB_OTG
+	otg->gadget = gadget;
+	dev_dbg(&isp->client->dev, "registered gadget\n");
+	/* gadget driver may be suspended until vbus_connect () */
+	if (otg->host)
+		return isp1301_otg_enable(isp);
+	return 0;
+
+#elif	!defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OHCI_HCD_MODULE)
+	otg->gadget = gadget;
+	// FIXME update its refcount
+
+	{
+		u32 l;
+
+		l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
+		l &= ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS);
+		l |= OTG_ID;
+		omap_writel(l, OTG_CTRL);
+	}
+
+	power_up(isp);
+	isp->phy.otg->state = OTG_STATE_B_IDLE;
+
+	if (machine_is_omap_h2() || machine_is_omap_h3())
+		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
+
+	isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
+		INTR_SESS_VLD);
+	isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
+		INTR_VBUS_VLD);
+	dev_info(&isp->client->dev, "B-Peripheral sessions ok\n");
+	dump_regs(isp, __func__);
+
+	/* If this has a Mini-AB connector, this mode is highly
+	 * nonstandard ... but can be handy for testing, so long
+	 * as you don't plug a Mini-A cable into the jack.
+	 */
+	if (isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE) & INTR_VBUS_VLD)
+		b_peripheral(isp);
+
+	return 0;
+
+#else
+	dev_dbg(&isp->client->dev, "peripheral sessions not allowed\n");
+	return -EINVAL;
+#endif
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int
+isp1301_set_power(struct usb_phy *dev, unsigned mA)
+{
+	if (!the_transceiver)
+		return -ENODEV;
+	if (dev->otg->state == OTG_STATE_B_PERIPHERAL)
+		enable_vbus_draw(the_transceiver, mA);
+	return 0;
+}
+
+static int
+isp1301_start_srp(struct usb_otg *otg)
+{
+	struct isp1301	*isp = container_of(otg->usb_phy, struct isp1301, phy);
+	u32		otg_ctrl;
+
+	if (isp != the_transceiver || isp->phy.otg->state != OTG_STATE_B_IDLE)
+		return -ENODEV;
+
+	otg_ctrl = omap_readl(OTG_CTRL);
+	if (!(otg_ctrl & OTG_BSESSEND))
+		return -EINVAL;
+
+	otg_ctrl |= OTG_B_BUSREQ;
+	otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK;
+	omap_writel(otg_ctrl, OTG_CTRL);
+	isp->phy.otg->state = OTG_STATE_B_SRP_INIT;
+
+	pr_debug("otg: SRP, %s ... %06x\n", state_name(isp),
+			omap_readl(OTG_CTRL));
+#ifdef	CONFIG_USB_OTG
+	check_state(isp, __func__);
+#endif
+	return 0;
+}
+
+static int
+isp1301_start_hnp(struct usb_otg *otg)
+{
+#ifdef	CONFIG_USB_OTG
+	struct isp1301	*isp = container_of(otg->usb_phy, struct isp1301, phy);
+	u32 l;
+
+	if (isp != the_transceiver)
+		return -ENODEV;
+	if (otg->default_a && (otg->host == NULL || !otg->host->b_hnp_enable))
+		return -ENOTCONN;
+	if (!otg->default_a && (otg->gadget == NULL
+			|| !otg->gadget->b_hnp_enable))
+		return -ENOTCONN;
+
+	/* We want hardware to manage most HNP protocol timings.
+	 * So do this part as early as possible...
+	 */
+	switch (isp->phy.otg->state) {
+	case OTG_STATE_B_HOST:
+		isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
+		/* caller will suspend next */
+		break;
+	case OTG_STATE_A_HOST:
+#if 0
+		/* autoconnect mode avoids irq latency bugs */
+		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1,
+				MC1_BDIS_ACON_EN);
+#endif
+		/* caller must suspend then clear A_BUSREQ */
+		usb_gadget_vbus_connect(otg->gadget);
+		l = omap_readl(OTG_CTRL);
+		l |= OTG_A_SETB_HNPEN;
+		omap_writel(l, OTG_CTRL);
+
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		/* initiated by B-Host suspend */
+		break;
+	default:
+		return -EILSEQ;
+	}
+	pr_debug("otg: HNP %s, %06x ...\n",
+		state_name(isp), omap_readl(OTG_CTRL));
+	check_state(isp, __func__);
+	return 0;
+#else
+	/* srp-only */
+	return -EINVAL;
+#endif
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+{
+	int			status;
+	struct isp1301		*isp;
+	int irq;
+
+	if (the_transceiver)
+		return 0;
+
+	isp = kzalloc(sizeof *isp, GFP_KERNEL);
+	if (!isp)
+		return 0;
+
+	isp->phy.otg = kzalloc(sizeof *isp->phy.otg, GFP_KERNEL);
+	if (!isp->phy.otg) {
+		kfree(isp);
+		return 0;
+	}
+
+	INIT_WORK(&isp->work, isp1301_work);
+	timer_setup(&isp->timer, isp1301_timer, 0);
+
+	i2c_set_clientdata(i2c, isp);
+	isp->client = i2c;
+
+	/* verify the chip (shouldn't be necessary) */
+	status = isp1301_get_u16(isp, ISP1301_VENDOR_ID);
+	if (status != I2C_VENDOR_ID_PHILIPS) {
+		dev_dbg(&i2c->dev, "not philips id: %d\n", status);
+		goto fail;
+	}
+	status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID);
+	if (status != I2C_PRODUCT_ID_PHILIPS_1301) {
+		dev_dbg(&i2c->dev, "not isp1301, %d\n", status);
+		goto fail;
+	}
+	isp->i2c_release = i2c->dev.release;
+	i2c->dev.release = isp1301_release;
+
+	/* initial development used chiprev 2.00 */
+	status = i2c_smbus_read_word_data(i2c, ISP1301_BCD_DEVICE);
+	dev_info(&i2c->dev, "chiprev %x.%02x, driver " DRIVER_VERSION "\n",
+		status >> 8, status & 0xff);
+
+	/* make like power-on reset */
+	isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_MASK);
+
+	isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_BI_DI);
+	isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, ~MC2_BI_DI);
+
+	isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1,
+				OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN);
+	isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1,
+				~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
+
+	isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, ~0);
+	isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0);
+	isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0);
+
+#ifdef	CONFIG_USB_OTG
+	status = otg_bind(isp);
+	if (status < 0) {
+		dev_dbg(&i2c->dev, "can't bind OTG\n");
+		goto fail;
+	}
+#endif
+
+	if (machine_is_omap_h2()) {
+		struct gpio_desc *gpiod;
+
+		/* full speed signaling by default */
+		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1,
+			MC1_SPEED);
+		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2,
+			MC2_SPD_SUSP_CTRL);
+
+		gpiod = devm_gpiod_get(&i2c->dev, NULL, GPIOD_IN);
+		if (IS_ERR(gpiod)) {
+			dev_err(&i2c->dev, "cannot obtain H2 GPIO\n");
+			goto fail;
+		}
+		gpiod_set_consumer_name(gpiod, "isp1301");
+		irq = gpiod_to_irq(gpiod);
+		isp->irq_type = IRQF_TRIGGER_FALLING;
+	} else {
+		irq = i2c->irq;
+	}
+
+	status = request_irq(irq, isp1301_irq,
+			isp->irq_type, DRIVER_NAME, isp);
+	if (status < 0) {
+		dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n",
+				i2c->irq, status);
+		goto fail;
+	}
+
+	isp->phy.dev = &i2c->dev;
+	isp->phy.label = DRIVER_NAME;
+	isp->phy.set_power = isp1301_set_power;
+
+	isp->phy.otg->usb_phy = &isp->phy;
+	isp->phy.otg->set_host = isp1301_set_host;
+	isp->phy.otg->set_peripheral = isp1301_set_peripheral;
+	isp->phy.otg->start_srp = isp1301_start_srp;
+	isp->phy.otg->start_hnp = isp1301_start_hnp;
+
+	enable_vbus_draw(isp, 0);
+	power_down(isp);
+	the_transceiver = isp;
+
+#ifdef	CONFIG_USB_OTG
+	update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE));
+	update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS));
+#endif
+
+	dump_regs(isp, __func__);
+
+#ifdef	VERBOSE
+	mod_timer(&isp->timer, jiffies + TIMER_JIFFIES);
+	dev_dbg(&i2c->dev, "scheduled timer, %d min\n", TIMER_MINUTES);
+#endif
+
+	status = usb_add_phy(&isp->phy, USB_PHY_TYPE_USB2);
+	if (status < 0)
+		dev_err(&i2c->dev, "can't register transceiver, %d\n",
+			status);
+
+	return 0;
+
+fail:
+	kfree(isp->phy.otg);
+	kfree(isp);
+	return -ENODEV;
+}
+
+static const struct i2c_device_id isp1301_id[] = {
+	{ "isp1301_omap", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, isp1301_id);
+
+static struct i2c_driver isp1301_driver = {
+	.driver = {
+		.name	= "isp1301_omap",
+	},
+	.probe		= isp1301_probe,
+	.remove		= isp1301_remove,
+	.id_table	= isp1301_id,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init isp_init(void)
+{
+	return i2c_add_driver(&isp1301_driver);
+}
+subsys_initcall(isp_init);
+
+static void __exit isp_exit(void)
+{
+	if (the_transceiver)
+		usb_remove_phy(&the_transceiver->phy);
+	i2c_del_driver(&isp1301_driver);
+}
+module_exit(isp_exit);
+
diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c
new file mode 100644
index 000000000..c2777a5c1
--- /dev/null
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NXP ISP1301 USB transceiver driver
+ *
+ * Copyright (C) 2012 Roland Stigge
+ *
+ * Author: Roland Stigge <stigge@antcom.de>
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/isp1301.h>
+
+#define DRV_NAME		"isp1301"
+
+struct isp1301 {
+	struct usb_phy		phy;
+	struct mutex		mutex;
+
+	struct i2c_client	*client;
+};
+
+#define phy_to_isp(p)		(container_of((p), struct isp1301, phy))
+
+static const struct i2c_device_id isp1301_id[] = {
+	{ "isp1301", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, isp1301_id);
+
+static const struct of_device_id isp1301_of_match[] = {
+	{.compatible = "nxp,isp1301" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, isp1301_of_match);
+
+static struct i2c_client *isp1301_i2c_client;
+
+static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear)
+{
+	return i2c_smbus_write_byte_data(isp->client, reg | clear, value);
+}
+
+static int isp1301_write(struct isp1301 *isp, u8 reg, u8 value)
+{
+	return __isp1301_write(isp, reg, value, 0);
+}
+
+static int isp1301_clear(struct isp1301 *isp, u8 reg, u8 value)
+{
+	return __isp1301_write(isp, reg, value, ISP1301_I2C_REG_CLEAR_ADDR);
+}
+
+static int isp1301_phy_init(struct usb_phy *phy)
+{
+	struct isp1301 *isp = phy_to_isp(phy);
+
+	/* Disable transparent UART mode first */
+	isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_UART_EN);
+	isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_1, ~MC1_SPEED_REG);
+	isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
+	isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_2, ~0);
+	isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_2, (MC2_BI_DI | MC2_PSW_EN
+				| MC2_SPD_SUSP_CTRL));
+
+	isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, ~0);
+	isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
+	isp1301_write(isp, ISP1301_I2C_OTG_CONTROL_1, (OTG1_DM_PULLDOWN
+				| OTG1_DP_PULLDOWN));
+	isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, (OTG1_DM_PULLUP
+				| OTG1_DP_PULLUP));
+
+	/* mask all interrupts */
+	isp1301_clear(isp, ISP1301_I2C_INTERRUPT_LATCH, ~0);
+	isp1301_clear(isp, ISP1301_I2C_INTERRUPT_FALLING, ~0);
+	isp1301_clear(isp, ISP1301_I2C_INTERRUPT_RISING, ~0);
+
+	return 0;
+}
+
+static int isp1301_phy_set_vbus(struct usb_phy *phy, int on)
+{
+	struct isp1301 *isp = phy_to_isp(phy);
+
+	if (on)
+		isp1301_write(isp, ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV);
+	else
+		isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV);
+
+	return 0;
+}
+
+static int isp1301_probe(struct i2c_client *client,
+			 const struct i2c_device_id *i2c_id)
+{
+	struct isp1301 *isp;
+	struct usb_phy *phy;
+
+	isp = devm_kzalloc(&client->dev, sizeof(*isp), GFP_KERNEL);
+	if (!isp)
+		return -ENOMEM;
+
+	isp->client = client;
+	mutex_init(&isp->mutex);
+
+	phy = &isp->phy;
+	phy->dev = &client->dev;
+	phy->label = DRV_NAME;
+	phy->init = isp1301_phy_init;
+	phy->set_vbus = isp1301_phy_set_vbus;
+	phy->type = USB_PHY_TYPE_USB2;
+
+	i2c_set_clientdata(client, isp);
+	usb_add_phy_dev(phy);
+
+	isp1301_i2c_client = client;
+
+	return 0;
+}
+
+static void isp1301_remove(struct i2c_client *client)
+{
+	struct isp1301 *isp = i2c_get_clientdata(client);
+
+	usb_remove_phy(&isp->phy);
+	isp1301_i2c_client = NULL;
+}
+
+static struct i2c_driver isp1301_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = isp1301_of_match,
+	},
+	.probe = isp1301_probe,
+	.remove = isp1301_remove,
+	.id_table = isp1301_id,
+};
+
+module_i2c_driver(isp1301_driver);
+
+struct i2c_client *isp1301_get_client(struct device_node *node)
+{
+	struct i2c_client *client;
+
+	/* reference of ISP1301 I2C node via DT */
+	client = of_find_i2c_device_by_node(node);
+	if (client)
+		return client;
+
+	/* non-DT: only one ISP1301 chip supported */
+	return isp1301_i2c_client;
+}
+EXPORT_SYMBOL_GPL(isp1301_get_client);
+
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("NXP ISP1301 USB transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/phy-jz4770.c b/drivers/usb/phy/phy-jz4770.c
new file mode 100644
index 000000000..f16adcacd
--- /dev/null
+++ b/drivers/usb/phy/phy-jz4770.c
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic SoCs USB PHY driver
+ * Copyright (c) Paul Cercueil <paul@crapouillou.net>
+ * Copyright (c) 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
+ * Copyright (c) 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/phy.h>
+
+/* OTGPHY register offsets */
+#define REG_USBPCR_OFFSET			0x00
+#define REG_USBRDT_OFFSET			0x04
+#define REG_USBVBFIL_OFFSET			0x08
+#define REG_USBPCR1_OFFSET			0x0c
+
+/* bits within the USBPCR register */
+#define USBPCR_USB_MODE				BIT(31)
+#define USBPCR_AVLD_REG				BIT(30)
+#define USBPCR_COMMONONN			BIT(25)
+#define USBPCR_VBUSVLDEXT			BIT(24)
+#define USBPCR_VBUSVLDEXTSEL		BIT(23)
+#define USBPCR_POR					BIT(22)
+#define USBPCR_SIDDQ				BIT(21)
+#define USBPCR_OTG_DISABLE			BIT(20)
+#define USBPCR_TXPREEMPHTUNE		BIT(6)
+
+#define USBPCR_IDPULLUP_LSB	28
+#define USBPCR_IDPULLUP_MASK		GENMASK(29, USBPCR_IDPULLUP_LSB)
+#define USBPCR_IDPULLUP_ALWAYS		(0x2 << USBPCR_IDPULLUP_LSB)
+#define USBPCR_IDPULLUP_SUSPEND		(0x1 << USBPCR_IDPULLUP_LSB)
+#define USBPCR_IDPULLUP_OTG			(0x0 << USBPCR_IDPULLUP_LSB)
+
+#define USBPCR_COMPDISTUNE_LSB		17
+#define USBPCR_COMPDISTUNE_MASK		GENMASK(19, USBPCR_COMPDISTUNE_LSB)
+#define USBPCR_COMPDISTUNE_DFT		(0x4 << USBPCR_COMPDISTUNE_LSB)
+
+#define USBPCR_OTGTUNE_LSB			14
+#define USBPCR_OTGTUNE_MASK			GENMASK(16, USBPCR_OTGTUNE_LSB)
+#define USBPCR_OTGTUNE_DFT			(0x4 << USBPCR_OTGTUNE_LSB)
+
+#define USBPCR_SQRXTUNE_LSB	11
+#define USBPCR_SQRXTUNE_MASK		GENMASK(13, USBPCR_SQRXTUNE_LSB)
+#define USBPCR_SQRXTUNE_DCR_20PCT	(0x7 << USBPCR_SQRXTUNE_LSB)
+#define USBPCR_SQRXTUNE_DFT			(0x3 << USBPCR_SQRXTUNE_LSB)
+
+#define USBPCR_TXFSLSTUNE_LSB		7
+#define USBPCR_TXFSLSTUNE_MASK		GENMASK(10, USBPCR_TXFSLSTUNE_LSB)
+#define USBPCR_TXFSLSTUNE_DCR_50PPT	(0xf << USBPCR_TXFSLSTUNE_LSB)
+#define USBPCR_TXFSLSTUNE_DCR_25PPT	(0x7 << USBPCR_TXFSLSTUNE_LSB)
+#define USBPCR_TXFSLSTUNE_DFT		(0x3 << USBPCR_TXFSLSTUNE_LSB)
+#define USBPCR_TXFSLSTUNE_INC_25PPT	(0x1 << USBPCR_TXFSLSTUNE_LSB)
+#define USBPCR_TXFSLSTUNE_INC_50PPT	(0x0 << USBPCR_TXFSLSTUNE_LSB)
+
+#define USBPCR_TXHSXVTUNE_LSB		4
+#define USBPCR_TXHSXVTUNE_MASK		GENMASK(5, USBPCR_TXHSXVTUNE_LSB)
+#define USBPCR_TXHSXVTUNE_DFT		(0x3 << USBPCR_TXHSXVTUNE_LSB)
+#define USBPCR_TXHSXVTUNE_DCR_15MV	(0x1 << USBPCR_TXHSXVTUNE_LSB)
+
+#define USBPCR_TXRISETUNE_LSB		4
+#define USBPCR_TXRISETUNE_MASK		GENMASK(5, USBPCR_TXRISETUNE_LSB)
+#define USBPCR_TXRISETUNE_DFT		(0x3 << USBPCR_TXRISETUNE_LSB)
+
+#define USBPCR_TXVREFTUNE_LSB		0
+#define USBPCR_TXVREFTUNE_MASK		GENMASK(3, USBPCR_TXVREFTUNE_LSB)
+#define USBPCR_TXVREFTUNE_INC_25PPT	(0x7 << USBPCR_TXVREFTUNE_LSB)
+#define USBPCR_TXVREFTUNE_DFT		(0x5 << USBPCR_TXVREFTUNE_LSB)
+
+/* bits within the USBRDTR register */
+#define USBRDT_UTMI_RST				BIT(27)
+#define USBRDT_HB_MASK				BIT(26)
+#define USBRDT_VBFIL_LD_EN			BIT(25)
+#define USBRDT_IDDIG_EN				BIT(24)
+#define USBRDT_IDDIG_REG			BIT(23)
+#define USBRDT_VBFIL_EN				BIT(2)
+
+/* bits within the USBPCR1 register */
+#define USBPCR1_BVLD_REG			BIT(31)
+#define USBPCR1_DPPD				BIT(29)
+#define USBPCR1_DMPD				BIT(28)
+#define USBPCR1_USB_SEL				BIT(28)
+#define USBPCR1_WORD_IF_16BIT		BIT(19)
+
+enum ingenic_usb_phy_version {
+	ID_JZ4770,
+	ID_JZ4780,
+	ID_X1000,
+	ID_X1830,
+};
+
+struct ingenic_soc_info {
+	enum ingenic_usb_phy_version version;
+
+	void (*usb_phy_init)(struct usb_phy *phy);
+};
+
+struct jz4770_phy {
+	const struct ingenic_soc_info *soc_info;
+
+	struct usb_phy phy;
+	struct usb_otg otg;
+	struct device *dev;
+	void __iomem *base;
+	struct clk *clk;
+	struct regulator *vcc_supply;
+};
+
+static inline struct jz4770_phy *otg_to_jz4770_phy(struct usb_otg *otg)
+{
+	return container_of(otg, struct jz4770_phy, otg);
+}
+
+static inline struct jz4770_phy *phy_to_jz4770_phy(struct usb_phy *phy)
+{
+	return container_of(phy, struct jz4770_phy, phy);
+}
+
+static int ingenic_usb_phy_set_peripheral(struct usb_otg *otg,
+				     struct usb_gadget *gadget)
+{
+	struct jz4770_phy *priv = otg_to_jz4770_phy(otg);
+	u32 reg;
+
+	if (priv->soc_info->version >= ID_X1000) {
+		reg = readl(priv->base + REG_USBPCR1_OFFSET);
+		reg |= USBPCR1_BVLD_REG;
+		writel(reg, priv->base + REG_USBPCR1_OFFSET);
+	}
+
+	reg = readl(priv->base + REG_USBPCR_OFFSET);
+	reg &= ~USBPCR_USB_MODE;
+	reg |= USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE;
+	writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+	return 0;
+}
+
+static int ingenic_usb_phy_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	struct jz4770_phy *priv = otg_to_jz4770_phy(otg);
+	u32 reg;
+
+	reg = readl(priv->base + REG_USBPCR_OFFSET);
+	reg &= ~(USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE);
+	reg |= USBPCR_USB_MODE;
+	writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+	return 0;
+}
+
+static int ingenic_usb_phy_init(struct usb_phy *phy)
+{
+	struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+	int err;
+	u32 reg;
+
+	err = regulator_enable(priv->vcc_supply);
+	if (err) {
+		dev_err(priv->dev, "Unable to enable VCC: %d\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(priv->clk);
+	if (err) {
+		dev_err(priv->dev, "Unable to start clock: %d\n", err);
+		return err;
+	}
+
+	priv->soc_info->usb_phy_init(phy);
+
+	/* Wait for PHY to reset */
+	usleep_range(30, 300);
+	reg = readl(priv->base + REG_USBPCR_OFFSET);
+	writel(reg & ~USBPCR_POR, priv->base + REG_USBPCR_OFFSET);
+	usleep_range(300, 1000);
+
+	return 0;
+}
+
+static void ingenic_usb_phy_shutdown(struct usb_phy *phy)
+{
+	struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+
+	clk_disable_unprepare(priv->clk);
+	regulator_disable(priv->vcc_supply);
+}
+
+static void ingenic_usb_phy_remove(void *phy)
+{
+	usb_remove_phy(phy);
+}
+
+static void jz4770_usb_phy_init(struct usb_phy *phy)
+{
+	struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+	u32 reg;
+
+	reg = USBPCR_AVLD_REG | USBPCR_COMMONONN | USBPCR_IDPULLUP_ALWAYS |
+		USBPCR_COMPDISTUNE_DFT | USBPCR_OTGTUNE_DFT | USBPCR_SQRXTUNE_DFT |
+		USBPCR_TXFSLSTUNE_DFT | USBPCR_TXRISETUNE_DFT | USBPCR_TXVREFTUNE_DFT |
+		USBPCR_POR;
+	writel(reg, priv->base + REG_USBPCR_OFFSET);
+}
+
+static void jz4780_usb_phy_init(struct usb_phy *phy)
+{
+	struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+	u32 reg;
+
+	reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_USB_SEL |
+		USBPCR1_WORD_IF_16BIT;
+	writel(reg, priv->base + REG_USBPCR1_OFFSET);
+
+	reg = USBPCR_TXPREEMPHTUNE | USBPCR_COMMONONN | USBPCR_POR;
+	writel(reg, priv->base + REG_USBPCR_OFFSET);
+}
+
+static void x1000_usb_phy_init(struct usb_phy *phy)
+{
+	struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+	u32 reg;
+
+	reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_WORD_IF_16BIT;
+	writel(reg, priv->base + REG_USBPCR1_OFFSET);
+
+	reg = USBPCR_SQRXTUNE_DCR_20PCT | USBPCR_TXPREEMPHTUNE |
+		USBPCR_TXHSXVTUNE_DCR_15MV | USBPCR_TXVREFTUNE_INC_25PPT |
+		USBPCR_COMMONONN | USBPCR_POR;
+	writel(reg, priv->base + REG_USBPCR_OFFSET);
+}
+
+static void x1830_usb_phy_init(struct usb_phy *phy)
+{
+	struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+	u32 reg;
+
+	/* rdt */
+	writel(USBRDT_VBFIL_EN | USBRDT_UTMI_RST, priv->base + REG_USBRDT_OFFSET);
+
+	reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_WORD_IF_16BIT |
+		USBPCR1_DMPD | USBPCR1_DPPD;
+	writel(reg, priv->base + REG_USBPCR1_OFFSET);
+
+	reg = USBPCR_IDPULLUP_OTG | USBPCR_VBUSVLDEXT |	USBPCR_TXPREEMPHTUNE |
+		USBPCR_COMMONONN | USBPCR_POR;
+	writel(reg, priv->base + REG_USBPCR_OFFSET);
+}
+
+static const struct ingenic_soc_info jz4770_soc_info = {
+	.version = ID_JZ4770,
+
+	.usb_phy_init = jz4770_usb_phy_init,
+};
+
+static const struct ingenic_soc_info jz4780_soc_info = {
+	.version = ID_JZ4780,
+
+	.usb_phy_init = jz4780_usb_phy_init,
+};
+
+static const struct ingenic_soc_info x1000_soc_info = {
+	.version = ID_X1000,
+
+	.usb_phy_init = x1000_usb_phy_init,
+};
+
+static const struct ingenic_soc_info x1830_soc_info = {
+	.version = ID_X1830,
+
+	.usb_phy_init = x1830_usb_phy_init,
+};
+
+static const struct of_device_id ingenic_usb_phy_of_matches[] = {
+	{ .compatible = "ingenic,jz4770-phy", .data = &jz4770_soc_info },
+	{ .compatible = "ingenic,jz4780-phy", .data = &jz4780_soc_info },
+	{ .compatible = "ingenic,x1000-phy", .data = &x1000_soc_info },
+	{ .compatible = "ingenic,x1830-phy", .data = &x1830_soc_info },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ingenic_usb_phy_of_matches);
+
+static int jz4770_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct jz4770_phy *priv;
+	int err;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->soc_info = device_get_match_data(&pdev->dev);
+	if (!priv->soc_info) {
+		dev_err(&pdev->dev, "Error: No device match found\n");
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	priv->dev = dev;
+	priv->phy.dev = dev;
+	priv->phy.otg = &priv->otg;
+	priv->phy.label = "ingenic-usb-phy";
+	priv->phy.init = ingenic_usb_phy_init;
+	priv->phy.shutdown = ingenic_usb_phy_shutdown;
+
+	priv->otg.state = OTG_STATE_UNDEFINED;
+	priv->otg.usb_phy = &priv->phy;
+	priv->otg.set_host = ingenic_usb_phy_set_host;
+	priv->otg.set_peripheral = ingenic_usb_phy_set_peripheral;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base)) {
+		dev_err(dev, "Failed to map registers\n");
+		return PTR_ERR(priv->base);
+	}
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk))
+		return dev_err_probe(dev, PTR_ERR(priv->clk),
+				     "Failed to get clock\n");
+
+	priv->vcc_supply = devm_regulator_get(dev, "vcc");
+	if (IS_ERR(priv->vcc_supply))
+		return dev_err_probe(dev, PTR_ERR(priv->vcc_supply),
+				     "Failed to get regulator\n");
+
+	err = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
+	if (err)
+		return dev_err_probe(dev, err, "Unable to register PHY\n");
+
+	return devm_add_action_or_reset(dev, ingenic_usb_phy_remove, &priv->phy);
+}
+
+static struct platform_driver ingenic_phy_driver = {
+	.probe		= jz4770_phy_probe,
+	.driver		= {
+		.name	= "jz4770-phy",
+		.of_match_table = ingenic_usb_phy_of_matches,
+	},
+};
+module_platform_driver(ingenic_phy_driver);
+
+MODULE_AUTHOR("周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>");
+MODULE_AUTHOR("漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>");
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic SoCs USB PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/phy-keystone.c b/drivers/usb/phy/phy-keystone.c
new file mode 100644
index 000000000..f75912279
--- /dev/null
+++ b/drivers/usb/phy/phy-keystone.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * phy-keystone - USB PHY, talking to dwc3 controller in Keystone.
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Author: WingMan Kwok <w-kwok2@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/usb_phy_generic.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#include "phy-generic.h"
+
+/* USB PHY control register offsets */
+#define USB_PHY_CTL_UTMI		0x0000
+#define USB_PHY_CTL_PIPE		0x0004
+#define USB_PHY_CTL_PARAM_1		0x0008
+#define USB_PHY_CTL_PARAM_2		0x000c
+#define USB_PHY_CTL_CLOCK		0x0010
+#define USB_PHY_CTL_PLL			0x0014
+
+#define PHY_REF_SSP_EN			BIT(29)
+
+struct keystone_usbphy {
+	struct usb_phy_generic	usb_phy_gen;
+	void __iomem			*phy_ctrl;
+};
+
+static inline u32 keystone_usbphy_readl(void __iomem *base, u32 offset)
+{
+	return readl(base + offset);
+}
+
+static inline void keystone_usbphy_writel(void __iomem *base,
+					  u32 offset, u32 value)
+{
+	writel(value, base + offset);
+}
+
+static int keystone_usbphy_init(struct usb_phy *phy)
+{
+	struct keystone_usbphy *k_phy = dev_get_drvdata(phy->dev);
+	u32 val;
+
+	val  = keystone_usbphy_readl(k_phy->phy_ctrl, USB_PHY_CTL_CLOCK);
+	keystone_usbphy_writel(k_phy->phy_ctrl, USB_PHY_CTL_CLOCK,
+				val | PHY_REF_SSP_EN);
+	return 0;
+}
+
+static void keystone_usbphy_shutdown(struct usb_phy *phy)
+{
+	struct keystone_usbphy *k_phy = dev_get_drvdata(phy->dev);
+	u32 val;
+
+	val  = keystone_usbphy_readl(k_phy->phy_ctrl, USB_PHY_CTL_CLOCK);
+	keystone_usbphy_writel(k_phy->phy_ctrl, USB_PHY_CTL_CLOCK,
+				val & ~PHY_REF_SSP_EN);
+}
+
+static int keystone_usbphy_probe(struct platform_device *pdev)
+{
+	struct device		*dev = &pdev->dev;
+	struct keystone_usbphy	*k_phy;
+	int ret;
+
+	k_phy = devm_kzalloc(dev, sizeof(*k_phy), GFP_KERNEL);
+	if (!k_phy)
+		return -ENOMEM;
+
+	k_phy->phy_ctrl = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(k_phy->phy_ctrl))
+		return PTR_ERR(k_phy->phy_ctrl);
+
+	ret = usb_phy_gen_create_phy(dev, &k_phy->usb_phy_gen);
+	if (ret)
+		return ret;
+
+	k_phy->usb_phy_gen.phy.init = keystone_usbphy_init;
+	k_phy->usb_phy_gen.phy.shutdown = keystone_usbphy_shutdown;
+
+	platform_set_drvdata(pdev, k_phy);
+
+	return usb_add_phy_dev(&k_phy->usb_phy_gen.phy);
+}
+
+static int keystone_usbphy_remove(struct platform_device *pdev)
+{
+	struct keystone_usbphy *k_phy = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&k_phy->usb_phy_gen.phy);
+
+	return 0;
+}
+
+static const struct of_device_id keystone_usbphy_ids[] = {
+	{ .compatible = "ti,keystone-usbphy" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, keystone_usbphy_ids);
+
+static struct platform_driver keystone_usbphy_driver = {
+	.probe          = keystone_usbphy_probe,
+	.remove         = keystone_usbphy_remove,
+	.driver         = {
+		.name   = "keystone-usbphy",
+		.of_match_table = keystone_usbphy_ids,
+	},
+};
+
+module_platform_driver(keystone_usbphy_driver);
+
+MODULE_ALIAS("platform:keystone-usbphy");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("Keystone USB phy driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
new file mode 100644
index 000000000..86503b7d6
--- /dev/null
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -0,0 +1,882 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ * Author: Chao Xie <chao.xie@marvell.com>
+ *	   Neil Zhang <zhangwm@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/uaccess.h>
+#include <linux/device.h>
+#include <linux/proc_fs.h>
+#include <linux/clk.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/hcd.h>
+#include <linux/platform_data/mv_usb.h>
+
+#include "phy-mv-usb.h"
+
+#define	DRIVER_DESC	"Marvell USB OTG transceiver driver"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static const char driver_name[] = "mv-otg";
+
+static char *state_string[] = {
+	"undefined",
+	"b_idle",
+	"b_srp_init",
+	"b_peripheral",
+	"b_wait_acon",
+	"b_host",
+	"a_idle",
+	"a_wait_vrise",
+	"a_wait_bcon",
+	"a_host",
+	"a_suspend",
+	"a_peripheral",
+	"a_wait_vfall",
+	"a_vbus_err"
+};
+
+static int mv_otg_set_vbus(struct usb_otg *otg, bool on)
+{
+	struct mv_otg *mvotg = container_of(otg->usb_phy, struct mv_otg, phy);
+	if (mvotg->pdata->set_vbus == NULL)
+		return -ENODEV;
+
+	return mvotg->pdata->set_vbus(on);
+}
+
+static int mv_otg_set_host(struct usb_otg *otg,
+			   struct usb_bus *host)
+{
+	otg->host = host;
+
+	return 0;
+}
+
+static int mv_otg_set_peripheral(struct usb_otg *otg,
+				 struct usb_gadget *gadget)
+{
+	otg->gadget = gadget;
+
+	return 0;
+}
+
+static void mv_otg_run_state_machine(struct mv_otg *mvotg,
+				     unsigned long delay)
+{
+	dev_dbg(&mvotg->pdev->dev, "transceiver is updated\n");
+	if (!mvotg->qwork)
+		return;
+
+	queue_delayed_work(mvotg->qwork, &mvotg->work, delay);
+}
+
+static void mv_otg_timer_await_bcon(struct timer_list *t)
+{
+	struct mv_otg *mvotg = from_timer(mvotg, t,
+					  otg_ctrl.timer[A_WAIT_BCON_TIMER]);
+
+	mvotg->otg_ctrl.a_wait_bcon_timeout = 1;
+
+	dev_info(&mvotg->pdev->dev, "B Device No Response!\n");
+
+	if (spin_trylock(&mvotg->wq_lock)) {
+		mv_otg_run_state_machine(mvotg, 0);
+		spin_unlock(&mvotg->wq_lock);
+	}
+}
+
+static int mv_otg_cancel_timer(struct mv_otg *mvotg, unsigned int id)
+{
+	struct timer_list *timer;
+
+	if (id >= OTG_TIMER_NUM)
+		return -EINVAL;
+
+	timer = &mvotg->otg_ctrl.timer[id];
+
+	if (timer_pending(timer))
+		del_timer(timer);
+
+	return 0;
+}
+
+static int mv_otg_set_timer(struct mv_otg *mvotg, unsigned int id,
+			    unsigned long interval)
+{
+	struct timer_list *timer;
+
+	if (id >= OTG_TIMER_NUM)
+		return -EINVAL;
+
+	timer = &mvotg->otg_ctrl.timer[id];
+	if (timer_pending(timer)) {
+		dev_err(&mvotg->pdev->dev, "Timer%d is already running\n", id);
+		return -EBUSY;
+	}
+
+	timer->expires = jiffies + interval;
+	add_timer(timer);
+
+	return 0;
+}
+
+static int mv_otg_reset(struct mv_otg *mvotg)
+{
+	u32 tmp;
+	int ret;
+
+	/* Stop the controller */
+	tmp = readl(&mvotg->op_regs->usbcmd);
+	tmp &= ~USBCMD_RUN_STOP;
+	writel(tmp, &mvotg->op_regs->usbcmd);
+
+	/* Reset the controller to get default values */
+	writel(USBCMD_CTRL_RESET, &mvotg->op_regs->usbcmd);
+
+	ret = readl_poll_timeout_atomic(&mvotg->op_regs->usbcmd, tmp,
+				(tmp & USBCMD_CTRL_RESET), 10, 10000);
+	if (ret < 0) {
+		dev_err(&mvotg->pdev->dev,
+			"Wait for RESET completed TIMEOUT\n");
+		return ret;
+	}
+
+	writel(0x0, &mvotg->op_regs->usbintr);
+	tmp = readl(&mvotg->op_regs->usbsts);
+	writel(tmp, &mvotg->op_regs->usbsts);
+
+	return 0;
+}
+
+static void mv_otg_init_irq(struct mv_otg *mvotg)
+{
+	u32 otgsc;
+
+	mvotg->irq_en = OTGSC_INTR_A_SESSION_VALID
+	    | OTGSC_INTR_A_VBUS_VALID;
+	mvotg->irq_status = OTGSC_INTSTS_A_SESSION_VALID
+	    | OTGSC_INTSTS_A_VBUS_VALID;
+
+	if (mvotg->pdata->vbus == NULL) {
+		mvotg->irq_en |= OTGSC_INTR_B_SESSION_VALID
+		    | OTGSC_INTR_B_SESSION_END;
+		mvotg->irq_status |= OTGSC_INTSTS_B_SESSION_VALID
+		    | OTGSC_INTSTS_B_SESSION_END;
+	}
+
+	if (mvotg->pdata->id == NULL) {
+		mvotg->irq_en |= OTGSC_INTR_USB_ID;
+		mvotg->irq_status |= OTGSC_INTSTS_USB_ID;
+	}
+
+	otgsc = readl(&mvotg->op_regs->otgsc);
+	otgsc |= mvotg->irq_en;
+	writel(otgsc, &mvotg->op_regs->otgsc);
+}
+
+static void mv_otg_start_host(struct mv_otg *mvotg, int on)
+{
+#ifdef CONFIG_USB
+	struct usb_otg *otg = mvotg->phy.otg;
+	struct usb_hcd *hcd;
+
+	if (!otg->host)
+		return;
+
+	dev_info(&mvotg->pdev->dev, "%s host\n", on ? "start" : "stop");
+
+	hcd = bus_to_hcd(otg->host);
+
+	if (on) {
+		usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
+		device_wakeup_enable(hcd->self.controller);
+	} else {
+		usb_remove_hcd(hcd);
+	}
+#endif /* CONFIG_USB */
+}
+
+static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on)
+{
+	struct usb_otg *otg = mvotg->phy.otg;
+
+	if (!otg->gadget)
+		return;
+
+	dev_info(mvotg->phy.dev, "gadget %s\n", on ? "on" : "off");
+
+	if (on)
+		usb_gadget_vbus_connect(otg->gadget);
+	else
+		usb_gadget_vbus_disconnect(otg->gadget);
+}
+
+static void otg_clock_enable(struct mv_otg *mvotg)
+{
+	clk_prepare_enable(mvotg->clk);
+}
+
+static void otg_clock_disable(struct mv_otg *mvotg)
+{
+	clk_disable_unprepare(mvotg->clk);
+}
+
+static int mv_otg_enable_internal(struct mv_otg *mvotg)
+{
+	int retval = 0;
+
+	if (mvotg->active)
+		return 0;
+
+	dev_dbg(&mvotg->pdev->dev, "otg enabled\n");
+
+	otg_clock_enable(mvotg);
+	if (mvotg->pdata->phy_init) {
+		retval = mvotg->pdata->phy_init(mvotg->phy_regs);
+		if (retval) {
+			dev_err(&mvotg->pdev->dev,
+				"init phy error %d\n", retval);
+			otg_clock_disable(mvotg);
+			return retval;
+		}
+	}
+	mvotg->active = 1;
+
+	return 0;
+
+}
+
+static int mv_otg_enable(struct mv_otg *mvotg)
+{
+	if (mvotg->clock_gating)
+		return mv_otg_enable_internal(mvotg);
+
+	return 0;
+}
+
+static void mv_otg_disable_internal(struct mv_otg *mvotg)
+{
+	if (mvotg->active) {
+		dev_dbg(&mvotg->pdev->dev, "otg disabled\n");
+		if (mvotg->pdata->phy_deinit)
+			mvotg->pdata->phy_deinit(mvotg->phy_regs);
+		otg_clock_disable(mvotg);
+		mvotg->active = 0;
+	}
+}
+
+static void mv_otg_disable(struct mv_otg *mvotg)
+{
+	if (mvotg->clock_gating)
+		mv_otg_disable_internal(mvotg);
+}
+
+static void mv_otg_update_inputs(struct mv_otg *mvotg)
+{
+	struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl;
+	u32 otgsc;
+
+	otgsc = readl(&mvotg->op_regs->otgsc);
+
+	if (mvotg->pdata->vbus) {
+		if (mvotg->pdata->vbus->poll() == VBUS_HIGH) {
+			otg_ctrl->b_sess_vld = 1;
+			otg_ctrl->b_sess_end = 0;
+		} else {
+			otg_ctrl->b_sess_vld = 0;
+			otg_ctrl->b_sess_end = 1;
+		}
+	} else {
+		otg_ctrl->b_sess_vld = !!(otgsc & OTGSC_STS_B_SESSION_VALID);
+		otg_ctrl->b_sess_end = !!(otgsc & OTGSC_STS_B_SESSION_END);
+	}
+
+	if (mvotg->pdata->id)
+		otg_ctrl->id = !!mvotg->pdata->id->poll();
+	else
+		otg_ctrl->id = !!(otgsc & OTGSC_STS_USB_ID);
+
+	if (mvotg->pdata->otg_force_a_bus_req && !otg_ctrl->id)
+		otg_ctrl->a_bus_req = 1;
+
+	otg_ctrl->a_sess_vld = !!(otgsc & OTGSC_STS_A_SESSION_VALID);
+	otg_ctrl->a_vbus_vld = !!(otgsc & OTGSC_STS_A_VBUS_VALID);
+
+	dev_dbg(&mvotg->pdev->dev, "%s: ", __func__);
+	dev_dbg(&mvotg->pdev->dev, "id %d\n", otg_ctrl->id);
+	dev_dbg(&mvotg->pdev->dev, "b_sess_vld %d\n", otg_ctrl->b_sess_vld);
+	dev_dbg(&mvotg->pdev->dev, "b_sess_end %d\n", otg_ctrl->b_sess_end);
+	dev_dbg(&mvotg->pdev->dev, "a_vbus_vld %d\n", otg_ctrl->a_vbus_vld);
+	dev_dbg(&mvotg->pdev->dev, "a_sess_vld %d\n", otg_ctrl->a_sess_vld);
+}
+
+static void mv_otg_update_state(struct mv_otg *mvotg)
+{
+	struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl;
+	int old_state = mvotg->phy.otg->state;
+
+	switch (old_state) {
+	case OTG_STATE_UNDEFINED:
+		mvotg->phy.otg->state = OTG_STATE_B_IDLE;
+		fallthrough;
+	case OTG_STATE_B_IDLE:
+		if (otg_ctrl->id == 0)
+			mvotg->phy.otg->state = OTG_STATE_A_IDLE;
+		else if (otg_ctrl->b_sess_vld)
+			mvotg->phy.otg->state = OTG_STATE_B_PERIPHERAL;
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		if (!otg_ctrl->b_sess_vld || otg_ctrl->id == 0)
+			mvotg->phy.otg->state = OTG_STATE_B_IDLE;
+		break;
+	case OTG_STATE_A_IDLE:
+		if (otg_ctrl->id)
+			mvotg->phy.otg->state = OTG_STATE_B_IDLE;
+		else if (!(otg_ctrl->a_bus_drop) &&
+			 (otg_ctrl->a_bus_req || otg_ctrl->a_srp_det))
+			mvotg->phy.otg->state = OTG_STATE_A_WAIT_VRISE;
+		break;
+	case OTG_STATE_A_WAIT_VRISE:
+		if (otg_ctrl->a_vbus_vld)
+			mvotg->phy.otg->state = OTG_STATE_A_WAIT_BCON;
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		if (otg_ctrl->id || otg_ctrl->a_bus_drop
+		    || otg_ctrl->a_wait_bcon_timeout) {
+			mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
+			mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
+			mvotg->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
+			otg_ctrl->a_bus_req = 0;
+		} else if (!otg_ctrl->a_vbus_vld) {
+			mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
+			mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
+			mvotg->phy.otg->state = OTG_STATE_A_VBUS_ERR;
+		} else if (otg_ctrl->b_conn) {
+			mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
+			mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
+			mvotg->phy.otg->state = OTG_STATE_A_HOST;
+		}
+		break;
+	case OTG_STATE_A_HOST:
+		if (otg_ctrl->id || !otg_ctrl->b_conn
+		    || otg_ctrl->a_bus_drop)
+			mvotg->phy.otg->state = OTG_STATE_A_WAIT_BCON;
+		else if (!otg_ctrl->a_vbus_vld)
+			mvotg->phy.otg->state = OTG_STATE_A_VBUS_ERR;
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		if (otg_ctrl->id
+		    || (!otg_ctrl->b_conn && otg_ctrl->a_sess_vld)
+		    || otg_ctrl->a_bus_req)
+			mvotg->phy.otg->state = OTG_STATE_A_IDLE;
+		break;
+	case OTG_STATE_A_VBUS_ERR:
+		if (otg_ctrl->id || otg_ctrl->a_clr_err
+		    || otg_ctrl->a_bus_drop) {
+			otg_ctrl->a_clr_err = 0;
+			mvotg->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static void mv_otg_work(struct work_struct *work)
+{
+	struct mv_otg *mvotg;
+	struct usb_otg *otg;
+	int old_state;
+
+	mvotg = container_of(to_delayed_work(work), struct mv_otg, work);
+
+run:
+	/* work queue is single thread, or we need spin_lock to protect */
+	otg = mvotg->phy.otg;
+	old_state = otg->state;
+
+	if (!mvotg->active)
+		return;
+
+	mv_otg_update_inputs(mvotg);
+	mv_otg_update_state(mvotg);
+
+	if (old_state != mvotg->phy.otg->state) {
+		dev_info(&mvotg->pdev->dev, "change from state %s to %s\n",
+			 state_string[old_state],
+			 state_string[mvotg->phy.otg->state]);
+
+		switch (mvotg->phy.otg->state) {
+		case OTG_STATE_B_IDLE:
+			otg->default_a = 0;
+			if (old_state == OTG_STATE_B_PERIPHERAL)
+				mv_otg_start_periphrals(mvotg, 0);
+			mv_otg_reset(mvotg);
+			mv_otg_disable(mvotg);
+			usb_phy_set_event(&mvotg->phy, USB_EVENT_NONE);
+			break;
+		case OTG_STATE_B_PERIPHERAL:
+			mv_otg_enable(mvotg);
+			mv_otg_start_periphrals(mvotg, 1);
+			usb_phy_set_event(&mvotg->phy, USB_EVENT_ENUMERATED);
+			break;
+		case OTG_STATE_A_IDLE:
+			otg->default_a = 1;
+			mv_otg_enable(mvotg);
+			if (old_state == OTG_STATE_A_WAIT_VFALL)
+				mv_otg_start_host(mvotg, 0);
+			mv_otg_reset(mvotg);
+			break;
+		case OTG_STATE_A_WAIT_VRISE:
+			mv_otg_set_vbus(otg, 1);
+			break;
+		case OTG_STATE_A_WAIT_BCON:
+			if (old_state != OTG_STATE_A_HOST)
+				mv_otg_start_host(mvotg, 1);
+			mv_otg_set_timer(mvotg, A_WAIT_BCON_TIMER,
+					 T_A_WAIT_BCON);
+			/*
+			 * Now, we directly enter A_HOST. So set b_conn = 1
+			 * here. In fact, it need host driver to notify us.
+			 */
+			mvotg->otg_ctrl.b_conn = 1;
+			break;
+		case OTG_STATE_A_HOST:
+			break;
+		case OTG_STATE_A_WAIT_VFALL:
+			/*
+			 * Now, we has exited A_HOST. So set b_conn = 0
+			 * here. In fact, it need host driver to notify us.
+			 */
+			mvotg->otg_ctrl.b_conn = 0;
+			mv_otg_set_vbus(otg, 0);
+			break;
+		case OTG_STATE_A_VBUS_ERR:
+			break;
+		default:
+			break;
+		}
+		goto run;
+	}
+}
+
+static irqreturn_t mv_otg_irq(int irq, void *dev)
+{
+	struct mv_otg *mvotg = dev;
+	u32 otgsc;
+
+	otgsc = readl(&mvotg->op_regs->otgsc);
+	writel(otgsc, &mvotg->op_regs->otgsc);
+
+	/*
+	 * if we have vbus, then the vbus detection for B-device
+	 * will be done by mv_otg_inputs_irq().
+	 */
+	if (mvotg->pdata->vbus)
+		if ((otgsc & OTGSC_STS_USB_ID) &&
+		    !(otgsc & OTGSC_INTSTS_USB_ID))
+			return IRQ_NONE;
+
+	if ((otgsc & mvotg->irq_status) == 0)
+		return IRQ_NONE;
+
+	mv_otg_run_state_machine(mvotg, 0);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mv_otg_inputs_irq(int irq, void *dev)
+{
+	struct mv_otg *mvotg = dev;
+
+	/* The clock may disabled at this time */
+	if (!mvotg->active) {
+		mv_otg_enable(mvotg);
+		mv_otg_init_irq(mvotg);
+	}
+
+	mv_otg_run_state_machine(mvotg, 0);
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t
+a_bus_req_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct mv_otg *mvotg = dev_get_drvdata(dev);
+	return scnprintf(buf, PAGE_SIZE, "%d\n",
+			 mvotg->otg_ctrl.a_bus_req);
+}
+
+static ssize_t
+a_bus_req_store(struct device *dev, struct device_attribute *attr,
+	      const char *buf, size_t count)
+{
+	struct mv_otg *mvotg = dev_get_drvdata(dev);
+
+	if (count > 2)
+		return -1;
+
+	/* We will use this interface to change to A device */
+	if (mvotg->phy.otg->state != OTG_STATE_B_IDLE
+	    && mvotg->phy.otg->state != OTG_STATE_A_IDLE)
+		return -1;
+
+	/* The clock may disabled and we need to set irq for ID detected */
+	mv_otg_enable(mvotg);
+	mv_otg_init_irq(mvotg);
+
+	if (buf[0] == '1') {
+		mvotg->otg_ctrl.a_bus_req = 1;
+		mvotg->otg_ctrl.a_bus_drop = 0;
+		dev_dbg(&mvotg->pdev->dev,
+			"User request: a_bus_req = 1\n");
+
+		if (spin_trylock(&mvotg->wq_lock)) {
+			mv_otg_run_state_machine(mvotg, 0);
+			spin_unlock(&mvotg->wq_lock);
+		}
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(a_bus_req);
+
+static ssize_t
+a_clr_err_store(struct device *dev, struct device_attribute *attr,
+	      const char *buf, size_t count)
+{
+	struct mv_otg *mvotg = dev_get_drvdata(dev);
+	if (!mvotg->phy.otg->default_a)
+		return -1;
+
+	if (count > 2)
+		return -1;
+
+	if (buf[0] == '1') {
+		mvotg->otg_ctrl.a_clr_err = 1;
+		dev_dbg(&mvotg->pdev->dev,
+			"User request: a_clr_err = 1\n");
+	}
+
+	if (spin_trylock(&mvotg->wq_lock)) {
+		mv_otg_run_state_machine(mvotg, 0);
+		spin_unlock(&mvotg->wq_lock);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR_WO(a_clr_err);
+
+static ssize_t
+a_bus_drop_show(struct device *dev, struct device_attribute *attr,
+	       char *buf)
+{
+	struct mv_otg *mvotg = dev_get_drvdata(dev);
+	return scnprintf(buf, PAGE_SIZE, "%d\n",
+			 mvotg->otg_ctrl.a_bus_drop);
+}
+
+static ssize_t
+a_bus_drop_store(struct device *dev, struct device_attribute *attr,
+	       const char *buf, size_t count)
+{
+	struct mv_otg *mvotg = dev_get_drvdata(dev);
+	if (!mvotg->phy.otg->default_a)
+		return -1;
+
+	if (count > 2)
+		return -1;
+
+	if (buf[0] == '0') {
+		mvotg->otg_ctrl.a_bus_drop = 0;
+		dev_dbg(&mvotg->pdev->dev,
+			"User request: a_bus_drop = 0\n");
+	} else if (buf[0] == '1') {
+		mvotg->otg_ctrl.a_bus_drop = 1;
+		mvotg->otg_ctrl.a_bus_req = 0;
+		dev_dbg(&mvotg->pdev->dev,
+			"User request: a_bus_drop = 1\n");
+		dev_dbg(&mvotg->pdev->dev,
+			"User request: and a_bus_req = 0\n");
+	}
+
+	if (spin_trylock(&mvotg->wq_lock)) {
+		mv_otg_run_state_machine(mvotg, 0);
+		spin_unlock(&mvotg->wq_lock);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(a_bus_drop);
+
+static struct attribute *inputs_attrs[] = {
+	&dev_attr_a_bus_req.attr,
+	&dev_attr_a_clr_err.attr,
+	&dev_attr_a_bus_drop.attr,
+	NULL,
+};
+
+static const struct attribute_group inputs_attr_group = {
+	.name = "inputs",
+	.attrs = inputs_attrs,
+};
+
+static const struct attribute_group *mv_otg_groups[] = {
+	&inputs_attr_group,
+	NULL,
+};
+
+static int mv_otg_remove(struct platform_device *pdev)
+{
+	struct mv_otg *mvotg = platform_get_drvdata(pdev);
+
+	if (mvotg->qwork)
+		destroy_workqueue(mvotg->qwork);
+
+	mv_otg_disable(mvotg);
+
+	usb_remove_phy(&mvotg->phy);
+
+	return 0;
+}
+
+static int mv_otg_probe(struct platform_device *pdev)
+{
+	struct mv_usb_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct mv_otg *mvotg;
+	struct usb_otg *otg;
+	struct resource *r;
+	int retval = 0, i;
+
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "failed to get platform data\n");
+		return -ENODEV;
+	}
+
+	mvotg = devm_kzalloc(&pdev->dev, sizeof(*mvotg), GFP_KERNEL);
+	if (!mvotg)
+		return -ENOMEM;
+
+	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, mvotg);
+
+	mvotg->pdev = pdev;
+	mvotg->pdata = pdata;
+
+	mvotg->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(mvotg->clk))
+		return PTR_ERR(mvotg->clk);
+
+	mvotg->qwork = create_singlethread_workqueue("mv_otg_queue");
+	if (!mvotg->qwork) {
+		dev_dbg(&pdev->dev, "cannot create workqueue for OTG\n");
+		return -ENOMEM;
+	}
+
+	INIT_DELAYED_WORK(&mvotg->work, mv_otg_work);
+
+	/* OTG common part */
+	mvotg->pdev = pdev;
+	mvotg->phy.dev = &pdev->dev;
+	mvotg->phy.otg = otg;
+	mvotg->phy.label = driver_name;
+
+	otg->state = OTG_STATE_UNDEFINED;
+	otg->usb_phy = &mvotg->phy;
+	otg->set_host = mv_otg_set_host;
+	otg->set_peripheral = mv_otg_set_peripheral;
+	otg->set_vbus = mv_otg_set_vbus;
+
+	for (i = 0; i < OTG_TIMER_NUM; i++)
+		timer_setup(&mvotg->otg_ctrl.timer[i],
+			    mv_otg_timer_await_bcon, 0);
+
+	r = platform_get_resource_byname(mvotg->pdev,
+					 IORESOURCE_MEM, "phyregs");
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no phy I/O memory resource defined\n");
+		retval = -ENODEV;
+		goto err_destroy_workqueue;
+	}
+
+	mvotg->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (mvotg->phy_regs == NULL) {
+		dev_err(&pdev->dev, "failed to map phy I/O memory\n");
+		retval = -EFAULT;
+		goto err_destroy_workqueue;
+	}
+
+	r = platform_get_resource_byname(mvotg->pdev,
+					 IORESOURCE_MEM, "capregs");
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no I/O memory resource defined\n");
+		retval = -ENODEV;
+		goto err_destroy_workqueue;
+	}
+
+	mvotg->cap_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (mvotg->cap_regs == NULL) {
+		dev_err(&pdev->dev, "failed to map I/O memory\n");
+		retval = -EFAULT;
+		goto err_destroy_workqueue;
+	}
+
+	/* we will acces controller register, so enable the udc controller */
+	retval = mv_otg_enable_internal(mvotg);
+	if (retval) {
+		dev_err(&pdev->dev, "mv otg enable error %d\n", retval);
+		goto err_destroy_workqueue;
+	}
+
+	mvotg->op_regs =
+		(struct mv_otg_regs __iomem *) ((unsigned long) mvotg->cap_regs
+			+ (readl(mvotg->cap_regs) & CAPLENGTH_MASK));
+
+	if (pdata->id) {
+		retval = devm_request_threaded_irq(&pdev->dev, pdata->id->irq,
+						NULL, mv_otg_inputs_irq,
+						IRQF_ONESHOT, "id", mvotg);
+		if (retval) {
+			dev_info(&pdev->dev,
+				 "Failed to request irq for ID\n");
+			pdata->id = NULL;
+		}
+	}
+
+	if (pdata->vbus) {
+		mvotg->clock_gating = 1;
+		retval = devm_request_threaded_irq(&pdev->dev, pdata->vbus->irq,
+						NULL, mv_otg_inputs_irq,
+						IRQF_ONESHOT, "vbus", mvotg);
+		if (retval) {
+			dev_info(&pdev->dev,
+				 "Failed to request irq for VBUS, "
+				 "disable clock gating\n");
+			mvotg->clock_gating = 0;
+			pdata->vbus = NULL;
+		}
+	}
+
+	if (pdata->disable_otg_clock_gating)
+		mvotg->clock_gating = 0;
+
+	mv_otg_reset(mvotg);
+	mv_otg_init_irq(mvotg);
+
+	r = platform_get_resource(mvotg->pdev, IORESOURCE_IRQ, 0);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no IRQ resource defined\n");
+		retval = -ENODEV;
+		goto err_disable_clk;
+	}
+
+	mvotg->irq = r->start;
+	if (devm_request_irq(&pdev->dev, mvotg->irq, mv_otg_irq, IRQF_SHARED,
+			driver_name, mvotg)) {
+		dev_err(&pdev->dev, "Request irq %d for OTG failed\n",
+			mvotg->irq);
+		mvotg->irq = 0;
+		retval = -ENODEV;
+		goto err_disable_clk;
+	}
+
+	retval = usb_add_phy(&mvotg->phy, USB_PHY_TYPE_USB2);
+	if (retval < 0) {
+		dev_err(&pdev->dev, "can't register transceiver, %d\n",
+			retval);
+		goto err_disable_clk;
+	}
+
+	spin_lock_init(&mvotg->wq_lock);
+	if (spin_trylock(&mvotg->wq_lock)) {
+		mv_otg_run_state_machine(mvotg, 2 * HZ);
+		spin_unlock(&mvotg->wq_lock);
+	}
+
+	dev_info(&pdev->dev,
+		 "successful probe OTG device %s clock gating.\n",
+		 mvotg->clock_gating ? "with" : "without");
+
+	return 0;
+
+err_disable_clk:
+	mv_otg_disable_internal(mvotg);
+err_destroy_workqueue:
+	destroy_workqueue(mvotg->qwork);
+
+	return retval;
+}
+
+#ifdef CONFIG_PM
+static int mv_otg_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct mv_otg *mvotg = platform_get_drvdata(pdev);
+
+	if (mvotg->phy.otg->state != OTG_STATE_B_IDLE) {
+		dev_info(&pdev->dev,
+			 "OTG state is not B_IDLE, it is %d!\n",
+			 mvotg->phy.otg->state);
+		return -EAGAIN;
+	}
+
+	if (!mvotg->clock_gating)
+		mv_otg_disable_internal(mvotg);
+
+	return 0;
+}
+
+static int mv_otg_resume(struct platform_device *pdev)
+{
+	struct mv_otg *mvotg = platform_get_drvdata(pdev);
+	u32 otgsc;
+
+	if (!mvotg->clock_gating) {
+		mv_otg_enable_internal(mvotg);
+
+		otgsc = readl(&mvotg->op_regs->otgsc);
+		otgsc |= mvotg->irq_en;
+		writel(otgsc, &mvotg->op_regs->otgsc);
+
+		if (spin_trylock(&mvotg->wq_lock)) {
+			mv_otg_run_state_machine(mvotg, 0);
+			spin_unlock(&mvotg->wq_lock);
+		}
+	}
+	return 0;
+}
+#endif
+
+static struct platform_driver mv_otg_driver = {
+	.probe = mv_otg_probe,
+	.remove = mv_otg_remove,
+	.driver = {
+		   .name = driver_name,
+		   .dev_groups = mv_otg_groups,
+		   },
+#ifdef CONFIG_PM
+	.suspend = mv_otg_suspend,
+	.resume = mv_otg_resume,
+#endif
+};
+module_platform_driver(mv_otg_driver);
diff --git a/drivers/usb/phy/phy-mv-usb.h b/drivers/usb/phy/phy-mv-usb.h
new file mode 100644
index 000000000..5d5c0abb0
--- /dev/null
+++ b/drivers/usb/phy/phy-mv-usb.h
@@ -0,0 +1,160 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ */
+
+#ifndef	__MV_USB_OTG_CONTROLLER__
+#define	__MV_USB_OTG_CONTROLLER__
+
+#include <linux/types.h>
+
+/* Command Register Bit Masks */
+#define USBCMD_RUN_STOP			(0x00000001)
+#define USBCMD_CTRL_RESET		(0x00000002)
+
+/* otgsc Register Bit Masks */
+#define OTGSC_CTRL_VUSB_DISCHARGE		0x00000001
+#define OTGSC_CTRL_VUSB_CHARGE			0x00000002
+#define OTGSC_CTRL_OTG_TERM			0x00000008
+#define OTGSC_CTRL_DATA_PULSING			0x00000010
+#define OTGSC_STS_USB_ID			0x00000100
+#define OTGSC_STS_A_VBUS_VALID			0x00000200
+#define OTGSC_STS_A_SESSION_VALID		0x00000400
+#define OTGSC_STS_B_SESSION_VALID		0x00000800
+#define OTGSC_STS_B_SESSION_END			0x00001000
+#define OTGSC_STS_1MS_TOGGLE			0x00002000
+#define OTGSC_STS_DATA_PULSING			0x00004000
+#define OTGSC_INTSTS_USB_ID			0x00010000
+#define OTGSC_INTSTS_A_VBUS_VALID		0x00020000
+#define OTGSC_INTSTS_A_SESSION_VALID		0x00040000
+#define OTGSC_INTSTS_B_SESSION_VALID		0x00080000
+#define OTGSC_INTSTS_B_SESSION_END		0x00100000
+#define OTGSC_INTSTS_1MS			0x00200000
+#define OTGSC_INTSTS_DATA_PULSING		0x00400000
+#define OTGSC_INTR_USB_ID			0x01000000
+#define OTGSC_INTR_A_VBUS_VALID			0x02000000
+#define OTGSC_INTR_A_SESSION_VALID		0x04000000
+#define OTGSC_INTR_B_SESSION_VALID		0x08000000
+#define OTGSC_INTR_B_SESSION_END		0x10000000
+#define OTGSC_INTR_1MS_TIMER			0x20000000
+#define OTGSC_INTR_DATA_PULSING			0x40000000
+
+#define CAPLENGTH_MASK		(0xff)
+
+/* Timer's interval, unit 10ms */
+#define T_A_WAIT_VRISE		100
+#define T_A_WAIT_BCON		2000
+#define T_A_AIDL_BDIS		100
+#define T_A_BIDL_ADIS		20
+#define T_B_ASE0_BRST		400
+#define T_B_SE0_SRP		300
+#define T_B_SRP_FAIL		2000
+#define T_B_DATA_PLS		10
+#define T_B_SRP_INIT		100
+#define T_A_SRP_RSPNS		10
+#define T_A_DRV_RSM		5
+
+enum otg_function {
+	OTG_B_DEVICE = 0,
+	OTG_A_DEVICE
+};
+
+enum mv_otg_timer {
+	A_WAIT_BCON_TIMER = 0,
+	OTG_TIMER_NUM
+};
+
+/* PXA OTG state machine */
+struct mv_otg_ctrl {
+	/* internal variables */
+	u8 a_set_b_hnp_en;	/* A-Device set b_hnp_en */
+	u8 b_srp_done;
+	u8 b_hnp_en;
+
+	/* OTG inputs */
+	u8 a_bus_drop;
+	u8 a_bus_req;
+	u8 a_clr_err;
+	u8 a_bus_resume;
+	u8 a_bus_suspend;
+	u8 a_conn;
+	u8 a_sess_vld;
+	u8 a_srp_det;
+	u8 a_vbus_vld;
+	u8 b_bus_req;		/* B-Device Require Bus */
+	u8 b_bus_resume;
+	u8 b_bus_suspend;
+	u8 b_conn;
+	u8 b_se0_srp;
+	u8 b_sess_end;
+	u8 b_sess_vld;
+	u8 id;
+	u8 a_suspend_req;
+
+	/*Timer event */
+	u8 a_aidl_bdis_timeout;
+	u8 b_ase0_brst_timeout;
+	u8 a_bidl_adis_timeout;
+	u8 a_wait_bcon_timeout;
+
+	struct timer_list timer[OTG_TIMER_NUM];
+};
+
+#define VUSBHS_MAX_PORTS	8
+
+struct mv_otg_regs {
+	u32 usbcmd;		/* Command register */
+	u32 usbsts;		/* Status register */
+	u32 usbintr;		/* Interrupt enable */
+	u32 frindex;		/* Frame index */
+	u32 reserved1[1];
+	u32 deviceaddr;		/* Device Address */
+	u32 eplistaddr;		/* Endpoint List Address */
+	u32 ttctrl;		/* HOST TT status and control */
+	u32 burstsize;		/* Programmable Burst Size */
+	u32 txfilltuning;	/* Host Transmit Pre-Buffer Packet Tuning */
+	u32 reserved[4];
+	u32 epnak;		/* Endpoint NAK */
+	u32 epnaken;		/* Endpoint NAK Enable */
+	u32 configflag;		/* Configured Flag register */
+	u32 portsc[VUSBHS_MAX_PORTS];	/* Port Status/Control x, x = 1..8 */
+	u32 otgsc;
+	u32 usbmode;		/* USB Host/Device mode */
+	u32 epsetupstat;	/* Endpoint Setup Status */
+	u32 epprime;		/* Endpoint Initialize */
+	u32 epflush;		/* Endpoint De-initialize */
+	u32 epstatus;		/* Endpoint Status */
+	u32 epcomplete;		/* Endpoint Interrupt On Complete */
+	u32 epctrlx[16];	/* Endpoint Control, where x = 0.. 15 */
+	u32 mcr;		/* Mux Control */
+	u32 isr;		/* Interrupt Status */
+	u32 ier;		/* Interrupt Enable */
+};
+
+struct mv_otg {
+	struct usb_phy phy;
+	struct mv_otg_ctrl otg_ctrl;
+
+	/* base address */
+	void __iomem *phy_regs;
+	void __iomem *cap_regs;
+	struct mv_otg_regs __iomem *op_regs;
+
+	struct platform_device *pdev;
+	int irq;
+	u32 irq_status;
+	u32 irq_en;
+
+	struct delayed_work work;
+	struct workqueue_struct *qwork;
+
+	spinlock_t wq_lock;
+
+	struct mv_usb_platform_data *pdata;
+
+	unsigned int active;
+	unsigned int clock_gating;
+	struct clk *clk;
+};
+
+#endif
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
new file mode 100644
index 000000000..160c92643
--- /dev/null
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -0,0 +1,873 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2012-2014 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/usb/otg.h>
+#include <linux/stmp_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/iopoll.h>
+
+#define DRIVER_NAME "mxs_phy"
+
+/* Register Macro */
+#define HW_USBPHY_PWD				0x00
+#define HW_USBPHY_TX				0x10
+#define HW_USBPHY_CTRL				0x30
+#define HW_USBPHY_CTRL_SET			0x34
+#define HW_USBPHY_CTRL_CLR			0x38
+
+#define HW_USBPHY_DEBUG_SET			0x54
+#define HW_USBPHY_DEBUG_CLR			0x58
+
+#define HW_USBPHY_IP				0x90
+#define HW_USBPHY_IP_SET			0x94
+#define HW_USBPHY_IP_CLR			0x98
+
+#define GM_USBPHY_TX_TXCAL45DP(x)            (((x) & 0xf) << 16)
+#define GM_USBPHY_TX_TXCAL45DN(x)            (((x) & 0xf) << 8)
+#define GM_USBPHY_TX_D_CAL(x)                (((x) & 0xf) << 0)
+
+/* imx7ulp */
+#define HW_USBPHY_PLL_SIC			0xa0
+#define HW_USBPHY_PLL_SIC_SET			0xa4
+#define HW_USBPHY_PLL_SIC_CLR			0xa8
+
+#define BM_USBPHY_CTRL_SFTRST			BIT(31)
+#define BM_USBPHY_CTRL_CLKGATE			BIT(30)
+#define BM_USBPHY_CTRL_OTG_ID_VALUE		BIT(27)
+#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS	BIT(26)
+#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE	BIT(25)
+#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP		BIT(23)
+#define BM_USBPHY_CTRL_ENIDCHG_WKUP		BIT(22)
+#define BM_USBPHY_CTRL_ENDPDMCHG_WKUP		BIT(21)
+#define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD	BIT(20)
+#define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE	BIT(19)
+#define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL		BIT(18)
+#define BM_USBPHY_CTRL_ENUTMILEVEL3		BIT(15)
+#define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
+
+#define BM_USBPHY_IP_FIX                       (BIT(17) | BIT(18))
+
+#define BM_USBPHY_DEBUG_CLKGATE			BIT(30)
+/* imx7ulp */
+#define BM_USBPHY_PLL_LOCK			BIT(31)
+#define BM_USBPHY_PLL_REG_ENABLE		BIT(21)
+#define BM_USBPHY_PLL_BYPASS			BIT(16)
+#define BM_USBPHY_PLL_POWER			BIT(12)
+#define BM_USBPHY_PLL_EN_USB_CLKS		BIT(6)
+
+/* Anatop Registers */
+#define ANADIG_ANA_MISC0			0x150
+#define ANADIG_ANA_MISC0_SET			0x154
+#define ANADIG_ANA_MISC0_CLR			0x158
+
+#define ANADIG_USB1_CHRG_DETECT_SET		0x1b4
+#define ANADIG_USB1_CHRG_DETECT_CLR		0x1b8
+#define ANADIG_USB2_CHRG_DETECT_SET		0x214
+#define ANADIG_USB1_CHRG_DETECT_EN_B		BIT(20)
+#define ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B	BIT(19)
+#define ANADIG_USB1_CHRG_DETECT_CHK_CONTACT	BIT(18)
+
+#define ANADIG_USB1_VBUS_DET_STAT		0x1c0
+#define ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID	BIT(3)
+
+#define ANADIG_USB1_CHRG_DET_STAT		0x1d0
+#define ANADIG_USB1_CHRG_DET_STAT_DM_STATE	BIT(2)
+#define ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED	BIT(1)
+#define ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT	BIT(0)
+
+#define ANADIG_USB2_VBUS_DET_STAT		0x220
+
+#define ANADIG_USB1_LOOPBACK_SET		0x1e4
+#define ANADIG_USB1_LOOPBACK_CLR		0x1e8
+#define ANADIG_USB1_LOOPBACK_UTMI_TESTSTART	BIT(0)
+
+#define ANADIG_USB2_LOOPBACK_SET		0x244
+#define ANADIG_USB2_LOOPBACK_CLR		0x248
+
+#define ANADIG_USB1_MISC			0x1f0
+#define ANADIG_USB2_MISC			0x250
+
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	BIT(12)
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
+
+#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID	BIT(3)
+#define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID	BIT(3)
+
+#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1	BIT(2)
+#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN	BIT(5)
+#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1	BIT(2)
+#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN	BIT(5)
+
+#define BM_ANADIG_USB1_MISC_RX_VPIN_FS		BIT(29)
+#define BM_ANADIG_USB1_MISC_RX_VMIN_FS		BIT(28)
+#define BM_ANADIG_USB2_MISC_RX_VPIN_FS		BIT(29)
+#define BM_ANADIG_USB2_MISC_RX_VMIN_FS		BIT(28)
+
+#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
+
+/* Do disconnection between PHY and controller without vbus */
+#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS	BIT(0)
+
+/*
+ * The PHY will be in messy if there is a wakeup after putting
+ * bus to suspend (set portsc.suspendM) but before setting PHY to low
+ * power mode (set portsc.phcd).
+ */
+#define MXS_PHY_ABNORMAL_IN_SUSPEND		BIT(1)
+
+/*
+ * The SOF sends too fast after resuming, it will cause disconnection
+ * between host and high speed device.
+ */
+#define MXS_PHY_SENDING_SOF_TOO_FAST		BIT(2)
+
+/*
+ * IC has bug fixes logic, they include
+ * MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST
+ * which are described at above flags, the RTL will handle it
+ * according to different versions.
+ */
+#define MXS_PHY_NEED_IP_FIX			BIT(3)
+
+/* Minimum and maximum values for device tree entries */
+#define MXS_PHY_TX_CAL45_MIN			35
+#define MXS_PHY_TX_CAL45_MAX			54
+#define MXS_PHY_TX_D_CAL_MIN			79
+#define MXS_PHY_TX_D_CAL_MAX			119
+
+struct mxs_phy_data {
+	unsigned int flags;
+};
+
+static const struct mxs_phy_data imx23_phy_data = {
+	.flags = MXS_PHY_ABNORMAL_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
+};
+
+static const struct mxs_phy_data imx6q_phy_data = {
+	.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
+		MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
+		MXS_PHY_NEED_IP_FIX,
+};
+
+static const struct mxs_phy_data imx6sl_phy_data = {
+	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
+		MXS_PHY_NEED_IP_FIX,
+};
+
+static const struct mxs_phy_data vf610_phy_data = {
+	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
+		MXS_PHY_NEED_IP_FIX,
+};
+
+static const struct mxs_phy_data imx6sx_phy_data = {
+	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+};
+
+static const struct mxs_phy_data imx6ul_phy_data = {
+	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+};
+
+static const struct mxs_phy_data imx7ulp_phy_data = {
+};
+
+static const struct of_device_id mxs_phy_dt_ids[] = {
+	{ .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, },
+	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
+	{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
+	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
+	{ .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
+	{ .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, },
+	{ .compatible = "fsl,imx7ulp-usbphy", .data = &imx7ulp_phy_data, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
+
+struct mxs_phy {
+	struct usb_phy phy;
+	struct clk *clk;
+	const struct mxs_phy_data *data;
+	struct regmap *regmap_anatop;
+	int port_id;
+	u32 tx_reg_set;
+	u32 tx_reg_mask;
+};
+
+static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->data == &imx6q_phy_data;
+}
+
+static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->data == &imx6sl_phy_data;
+}
+
+static inline bool is_imx7ulp_phy(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->data == &imx7ulp_phy_data;
+}
+
+/*
+ * PHY needs some 32K cycles to switch from 32K clock to
+ * bus (such as AHB/AXI, etc) clock.
+ */
+static void mxs_phy_clock_switch_delay(void)
+{
+	usleep_range(300, 400);
+}
+
+static void mxs_phy_tx_init(struct mxs_phy *mxs_phy)
+{
+	void __iomem *base = mxs_phy->phy.io_priv;
+	u32 phytx;
+
+	/* Update TX register if there is anything to write */
+	if (mxs_phy->tx_reg_mask) {
+		phytx = readl(base + HW_USBPHY_TX);
+		phytx &= ~mxs_phy->tx_reg_mask;
+		phytx |= mxs_phy->tx_reg_set;
+		writel(phytx, base + HW_USBPHY_TX);
+	}
+}
+
+static int mxs_phy_pll_enable(void __iomem *base, bool enable)
+{
+	int ret = 0;
+
+	if (enable) {
+		u32 value;
+
+		writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_SET);
+		writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_CLR);
+		writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_SET);
+		ret = readl_poll_timeout(base + HW_USBPHY_PLL_SIC,
+			value, (value & BM_USBPHY_PLL_LOCK) != 0,
+			100, 10000);
+		if (ret)
+			return ret;
+
+		writel(BM_USBPHY_PLL_EN_USB_CLKS, base +
+				HW_USBPHY_PLL_SIC_SET);
+	} else {
+		writel(BM_USBPHY_PLL_EN_USB_CLKS, base +
+				HW_USBPHY_PLL_SIC_CLR);
+		writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_CLR);
+		writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_SET);
+		writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_CLR);
+	}
+
+	return ret;
+}
+
+static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
+{
+	int ret;
+	void __iomem *base = mxs_phy->phy.io_priv;
+
+	if (is_imx7ulp_phy(mxs_phy)) {
+		ret = mxs_phy_pll_enable(base, true);
+		if (ret)
+			return ret;
+	}
+
+	ret = stmp_reset_block(base + HW_USBPHY_CTRL);
+	if (ret)
+		goto disable_pll;
+
+	/* Power up the PHY */
+	writel(0, base + HW_USBPHY_PWD);
+
+	/*
+	 * USB PHY Ctrl Setting
+	 * - Auto clock/power on
+	 * - Enable full/low speed support
+	 */
+	writel(BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
+		BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
+		BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
+		BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
+		BM_USBPHY_CTRL_ENAUTO_PWRON_PLL |
+		BM_USBPHY_CTRL_ENUTMILEVEL2 |
+		BM_USBPHY_CTRL_ENUTMILEVEL3,
+	       base + HW_USBPHY_CTRL_SET);
+
+	if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)
+		writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);
+
+	if (mxs_phy->regmap_anatop) {
+		unsigned int reg = mxs_phy->port_id ?
+			ANADIG_USB1_CHRG_DETECT_SET :
+			ANADIG_USB2_CHRG_DETECT_SET;
+		/*
+		 * The external charger detector needs to be disabled,
+		 * or the signal at DP will be poor
+		 */
+		regmap_write(mxs_phy->regmap_anatop, reg,
+			     ANADIG_USB1_CHRG_DETECT_EN_B |
+			     ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
+	}
+
+	mxs_phy_tx_init(mxs_phy);
+
+	return 0;
+
+disable_pll:
+	if (is_imx7ulp_phy(mxs_phy))
+		mxs_phy_pll_enable(base, false);
+	return ret;
+}
+
+/* Return true if the vbus is there */
+static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy)
+{
+	unsigned int vbus_value = 0;
+
+	if (!mxs_phy->regmap_anatop)
+		return false;
+
+	if (mxs_phy->port_id == 0)
+		regmap_read(mxs_phy->regmap_anatop,
+			ANADIG_USB1_VBUS_DET_STAT,
+			&vbus_value);
+	else if (mxs_phy->port_id == 1)
+		regmap_read(mxs_phy->regmap_anatop,
+			ANADIG_USB2_VBUS_DET_STAT,
+			&vbus_value);
+
+	if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)
+		return true;
+	else
+		return false;
+}
+
+static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect)
+{
+	void __iomem *base = mxs_phy->phy.io_priv;
+	u32 reg;
+
+	if (disconnect)
+		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+			base + HW_USBPHY_DEBUG_CLR);
+
+	if (mxs_phy->port_id == 0) {
+		reg = disconnect ? ANADIG_USB1_LOOPBACK_SET
+			: ANADIG_USB1_LOOPBACK_CLR;
+		regmap_write(mxs_phy->regmap_anatop, reg,
+			BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
+			BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
+	} else if (mxs_phy->port_id == 1) {
+		reg = disconnect ? ANADIG_USB2_LOOPBACK_SET
+			: ANADIG_USB2_LOOPBACK_CLR;
+		regmap_write(mxs_phy->regmap_anatop, reg,
+			BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 |
+			BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN);
+	}
+
+	if (!disconnect)
+		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+			base + HW_USBPHY_DEBUG_SET);
+
+	/* Delay some time, and let Linestate be SE0 for controller */
+	if (disconnect)
+		usleep_range(500, 1000);
+}
+
+static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->phy.last_event == USB_EVENT_ID;
+}
+
+static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
+{
+	bool vbus_is_on = false;
+
+	/* If the SoCs don't need to disconnect line without vbus, quit */
+	if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS))
+		return;
+
+	/* If the SoCs don't have anatop, quit */
+	if (!mxs_phy->regmap_anatop)
+		return;
+
+	vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
+
+	if (on && !vbus_is_on && !mxs_phy_is_otg_host(mxs_phy))
+		__mxs_phy_disconnect_line(mxs_phy, true);
+	else
+		__mxs_phy_disconnect_line(mxs_phy, false);
+
+}
+
+static int mxs_phy_init(struct usb_phy *phy)
+{
+	int ret;
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+	mxs_phy_clock_switch_delay();
+	ret = clk_prepare_enable(mxs_phy->clk);
+	if (ret)
+		return ret;
+
+	return mxs_phy_hw_init(mxs_phy);
+}
+
+static void mxs_phy_shutdown(struct usb_phy *phy)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+	u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
+			BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
+			BM_USBPHY_CTRL_ENIDCHG_WKUP |
+			BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
+			BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
+			BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
+			BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
+			BM_USBPHY_CTRL_ENAUTO_PWRON_PLL;
+
+	writel(value, phy->io_priv + HW_USBPHY_CTRL_CLR);
+	writel(0xffffffff, phy->io_priv + HW_USBPHY_PWD);
+
+	writel(BM_USBPHY_CTRL_CLKGATE,
+	       phy->io_priv + HW_USBPHY_CTRL_SET);
+
+	if (is_imx7ulp_phy(mxs_phy))
+		mxs_phy_pll_enable(phy->io_priv, false);
+
+	clk_disable_unprepare(mxs_phy->clk);
+}
+
+static bool mxs_phy_is_low_speed_connection(struct mxs_phy *mxs_phy)
+{
+	unsigned int line_state;
+	/* bit definition is the same for all controllers */
+	unsigned int dp_bit = BM_ANADIG_USB1_MISC_RX_VPIN_FS,
+		     dm_bit = BM_ANADIG_USB1_MISC_RX_VMIN_FS;
+	unsigned int reg = ANADIG_USB1_MISC;
+
+	/* If the SoCs don't have anatop, quit */
+	if (!mxs_phy->regmap_anatop)
+		return false;
+
+	if (mxs_phy->port_id == 0)
+		reg = ANADIG_USB1_MISC;
+	else if (mxs_phy->port_id == 1)
+		reg = ANADIG_USB2_MISC;
+
+	regmap_read(mxs_phy->regmap_anatop, reg, &line_state);
+
+	if ((line_state & (dp_bit | dm_bit)) ==  dm_bit)
+		return true;
+	else
+		return false;
+}
+
+static int mxs_phy_suspend(struct usb_phy *x, int suspend)
+{
+	int ret;
+	struct mxs_phy *mxs_phy = to_mxs_phy(x);
+	bool low_speed_connection, vbus_is_on;
+
+	low_speed_connection = mxs_phy_is_low_speed_connection(mxs_phy);
+	vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
+
+	if (suspend) {
+		/*
+		 * FIXME: Do not power down RXPWD1PT1 bit for low speed
+		 * connect. The low speed connection will have problem at
+		 * very rare cases during usb suspend and resume process.
+		 */
+		if (low_speed_connection & vbus_is_on) {
+			/*
+			 * If value to be set as pwd value is not 0xffffffff,
+			 * several 32Khz cycles are needed.
+			 */
+			mxs_phy_clock_switch_delay();
+			writel(0xffbfffff, x->io_priv + HW_USBPHY_PWD);
+		} else {
+			writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
+		}
+		writel(BM_USBPHY_CTRL_CLKGATE,
+		       x->io_priv + HW_USBPHY_CTRL_SET);
+		clk_disable_unprepare(mxs_phy->clk);
+	} else {
+		mxs_phy_clock_switch_delay();
+		ret = clk_prepare_enable(mxs_phy->clk);
+		if (ret)
+			return ret;
+		writel(BM_USBPHY_CTRL_CLKGATE,
+		       x->io_priv + HW_USBPHY_CTRL_CLR);
+		writel(0, x->io_priv + HW_USBPHY_PWD);
+	}
+
+	return 0;
+}
+
+static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(x);
+	u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
+			BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
+				BM_USBPHY_CTRL_ENIDCHG_WKUP;
+	if (enabled) {
+		mxs_phy_disconnect_line(mxs_phy, true);
+		writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET);
+	} else {
+		writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR);
+		mxs_phy_disconnect_line(mxs_phy, false);
+	}
+
+	return 0;
+}
+
+static int mxs_phy_on_connect(struct usb_phy *phy,
+		enum usb_device_speed speed)
+{
+	dev_dbg(phy->dev, "%s device has connected\n",
+		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
+
+	if (speed == USB_SPEED_HIGH)
+		writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+		       phy->io_priv + HW_USBPHY_CTRL_SET);
+
+	return 0;
+}
+
+static int mxs_phy_on_disconnect(struct usb_phy *phy,
+		enum usb_device_speed speed)
+{
+	dev_dbg(phy->dev, "%s device has disconnected\n",
+		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
+
+	/* Sometimes, the speed is not high speed when the error occurs */
+	if (readl(phy->io_priv + HW_USBPHY_CTRL) &
+			BM_USBPHY_CTRL_ENHOSTDISCONDETECT)
+		writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+		       phy->io_priv + HW_USBPHY_CTRL_CLR);
+
+	return 0;
+}
+
+#define MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT	100
+static int mxs_charger_data_contact_detect(struct mxs_phy *x)
+{
+	struct regmap *regmap = x->regmap_anatop;
+	int i, stable_contact_count = 0;
+	u32 val;
+
+	/* Check if vbus is valid */
+	regmap_read(regmap, ANADIG_USB1_VBUS_DET_STAT, &val);
+	if (!(val & ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)) {
+		dev_err(x->phy.dev, "vbus is not valid\n");
+		return -EINVAL;
+	}
+
+	/* Enable charger detector */
+	regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_CLR,
+				ANADIG_USB1_CHRG_DETECT_EN_B);
+	/*
+	 * - Do not check whether a charger is connected to the USB port
+	 * - Check whether the USB plug has been in contact with each other
+	 */
+	regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET,
+			ANADIG_USB1_CHRG_DETECT_CHK_CONTACT |
+			ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
+
+	/* Check if plug is connected */
+	for (i = 0; i < MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT; i++) {
+		regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val);
+		if (val & ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT) {
+			stable_contact_count++;
+			if (stable_contact_count > 5)
+				/* Data pin makes contact */
+				break;
+			else
+				usleep_range(5000, 10000);
+		} else {
+			stable_contact_count = 0;
+			usleep_range(5000, 6000);
+		}
+	}
+
+	if (i == MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT) {
+		dev_err(x->phy.dev,
+			"Data pin can't make good contact.\n");
+		/* Disable charger detector */
+		regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET,
+				ANADIG_USB1_CHRG_DETECT_EN_B |
+				ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static enum usb_charger_type mxs_charger_primary_detection(struct mxs_phy *x)
+{
+	struct regmap *regmap = x->regmap_anatop;
+	enum usb_charger_type chgr_type = UNKNOWN_TYPE;
+	u32 val;
+
+	/*
+	 * - Do check whether a charger is connected to the USB port
+	 * - Do not Check whether the USB plug has been in contact with
+	 *   each other
+	 */
+	regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_CLR,
+			ANADIG_USB1_CHRG_DETECT_CHK_CONTACT |
+			ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
+
+	msleep(100);
+
+	/* Check if it is a charger */
+	regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val);
+	if (!(val & ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED)) {
+		chgr_type = SDP_TYPE;
+		dev_dbg(x->phy.dev, "It is a standard downstream port\n");
+	}
+
+	/* Disable charger detector */
+	regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET,
+			ANADIG_USB1_CHRG_DETECT_EN_B |
+			ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
+
+	return chgr_type;
+}
+
+/*
+ * It must be called after DP is pulled up, which is used to
+ * differentiate DCP and CDP.
+ */
+static enum usb_charger_type mxs_charger_secondary_detection(struct mxs_phy *x)
+{
+	struct regmap *regmap = x->regmap_anatop;
+	int val;
+
+	msleep(80);
+
+	regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val);
+	if (val & ANADIG_USB1_CHRG_DET_STAT_DM_STATE) {
+		dev_dbg(x->phy.dev, "It is a dedicate charging port\n");
+		return DCP_TYPE;
+	} else {
+		dev_dbg(x->phy.dev, "It is a charging downstream port\n");
+		return CDP_TYPE;
+	}
+}
+
+static enum usb_charger_type mxs_phy_charger_detect(struct usb_phy *phy)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+	struct regmap *regmap = mxs_phy->regmap_anatop;
+	void __iomem *base = phy->io_priv;
+	enum usb_charger_type chgr_type = UNKNOWN_TYPE;
+
+	if (!regmap)
+		return UNKNOWN_TYPE;
+
+	if (mxs_charger_data_contact_detect(mxs_phy))
+		return chgr_type;
+
+	chgr_type = mxs_charger_primary_detection(mxs_phy);
+
+	if (chgr_type != SDP_TYPE) {
+		/* Pull up DP via test */
+		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+				base + HW_USBPHY_DEBUG_CLR);
+		regmap_write(regmap, ANADIG_USB1_LOOPBACK_SET,
+				ANADIG_USB1_LOOPBACK_UTMI_TESTSTART);
+
+		chgr_type = mxs_charger_secondary_detection(mxs_phy);
+
+		/* Stop the test */
+		regmap_write(regmap, ANADIG_USB1_LOOPBACK_CLR,
+				ANADIG_USB1_LOOPBACK_UTMI_TESTSTART);
+		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+				base + HW_USBPHY_DEBUG_SET);
+	}
+
+	return chgr_type;
+}
+
+static int mxs_phy_probe(struct platform_device *pdev)
+{
+	void __iomem *base;
+	struct clk *clk;
+	struct mxs_phy *mxs_phy;
+	int ret;
+	struct device_node *np = pdev->dev.of_node;
+	u32 val;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev,
+			"can't get the clock, err=%ld", PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+
+	mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL);
+	if (!mxs_phy)
+		return -ENOMEM;
+
+	/* Some SoCs don't have anatop registers */
+	if (of_get_property(np, "fsl,anatop", NULL)) {
+		mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle
+			(np, "fsl,anatop");
+		if (IS_ERR(mxs_phy->regmap_anatop)) {
+			dev_dbg(&pdev->dev,
+				"failed to find regmap for anatop\n");
+			return PTR_ERR(mxs_phy->regmap_anatop);
+		}
+	}
+
+	/* Precompute which bits of the TX register are to be updated, if any */
+	if (!of_property_read_u32(np, "fsl,tx-cal-45-dn-ohms", &val) &&
+	    val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) {
+		/* Scale to a 4-bit value */
+		val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF
+			/ (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN);
+		mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DN(~0);
+		mxs_phy->tx_reg_set  |= GM_USBPHY_TX_TXCAL45DN(val);
+	}
+
+	if (!of_property_read_u32(np, "fsl,tx-cal-45-dp-ohms", &val) &&
+	    val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) {
+		/* Scale to a 4-bit value. */
+		val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF
+			/ (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN);
+		mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DP(~0);
+		mxs_phy->tx_reg_set  |= GM_USBPHY_TX_TXCAL45DP(val);
+	}
+
+	if (!of_property_read_u32(np, "fsl,tx-d-cal", &val) &&
+	    val >= MXS_PHY_TX_D_CAL_MIN && val <= MXS_PHY_TX_D_CAL_MAX) {
+		/* Scale to a 4-bit value.  Round up the values and heavily
+		 * weight the rounding by adding 2/3 of the denominator.
+		 */
+		val = ((MXS_PHY_TX_D_CAL_MAX - val) * 0xF
+			+ (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN) * 2/3)
+			/ (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN);
+		mxs_phy->tx_reg_mask |= GM_USBPHY_TX_D_CAL(~0);
+		mxs_phy->tx_reg_set  |= GM_USBPHY_TX_D_CAL(val);
+	}
+
+	ret = of_alias_get_id(np, "usbphy");
+	if (ret < 0)
+		dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret);
+	mxs_phy->port_id = ret;
+
+	mxs_phy->phy.io_priv		= base;
+	mxs_phy->phy.dev		= &pdev->dev;
+	mxs_phy->phy.label		= DRIVER_NAME;
+	mxs_phy->phy.init		= mxs_phy_init;
+	mxs_phy->phy.shutdown		= mxs_phy_shutdown;
+	mxs_phy->phy.set_suspend	= mxs_phy_suspend;
+	mxs_phy->phy.notify_connect	= mxs_phy_on_connect;
+	mxs_phy->phy.notify_disconnect	= mxs_phy_on_disconnect;
+	mxs_phy->phy.type		= USB_PHY_TYPE_USB2;
+	mxs_phy->phy.set_wakeup		= mxs_phy_set_wakeup;
+	mxs_phy->phy.charger_detect	= mxs_phy_charger_detect;
+
+	mxs_phy->clk = clk;
+	mxs_phy->data = of_device_get_match_data(&pdev->dev);
+
+	platform_set_drvdata(pdev, mxs_phy);
+
+	device_set_wakeup_capable(&pdev->dev, true);
+
+	return usb_add_phy_dev(&mxs_phy->phy);
+}
+
+static int mxs_phy_remove(struct platform_device *pdev)
+{
+	struct mxs_phy *mxs_phy = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&mxs_phy->phy);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
+{
+	unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR;
+
+	/* If the SoCs don't have anatop, quit */
+	if (!mxs_phy->regmap_anatop)
+		return;
+
+	if (is_imx6q_phy(mxs_phy))
+		regmap_write(mxs_phy->regmap_anatop, reg,
+			BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG);
+	else if (is_imx6sl_phy(mxs_phy))
+		regmap_write(mxs_phy->regmap_anatop,
+			reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL);
+}
+
+static int mxs_phy_system_suspend(struct device *dev)
+{
+	struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		mxs_phy_enable_ldo_in_suspend(mxs_phy, true);
+
+	return 0;
+}
+
+static int mxs_phy_system_resume(struct device *dev)
+{
+	struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		mxs_phy_enable_ldo_in_suspend(mxs_phy, false);
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend,
+		mxs_phy_system_resume);
+
+static struct platform_driver mxs_phy_driver = {
+	.probe = mxs_phy_probe,
+	.remove = mxs_phy_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = mxs_phy_dt_ids,
+		.pm = &mxs_phy_pm,
+	 },
+};
+
+static int __init mxs_phy_module_init(void)
+{
+	return platform_driver_register(&mxs_phy_driver);
+}
+postcore_initcall(mxs_phy_module_init);
+
+static void __exit mxs_phy_module_exit(void)
+{
+	platform_driver_unregister(&mxs_phy_driver);
+}
+module_exit(mxs_phy_module_exit);
+
+MODULE_ALIAS("platform:mxs-usb-phy");
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
+MODULE_DESCRIPTION("Freescale MXS USB PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/phy-omap-otg.c b/drivers/usb/phy/phy-omap-otg.c
new file mode 100644
index 000000000..6e6ef8c0b
--- /dev/null
+++ b/drivers/usb/phy/phy-omap-otg.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OMAP OTG controller driver
+ *
+ * Based on code from tahvo-usb.c and isp1301_omap.c drivers.
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2004 David Brownell
+ */
+
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/extcon.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap1.h>
+
+struct otg_device {
+	void __iomem			*base;
+	bool				id;
+	bool				vbus;
+	struct extcon_dev		*extcon;
+	struct notifier_block		vbus_nb;
+	struct notifier_block		id_nb;
+};
+
+#define OMAP_OTG_CTRL		0x0c
+#define OMAP_OTG_ASESSVLD	(1 << 20)
+#define OMAP_OTG_BSESSEND	(1 << 19)
+#define OMAP_OTG_BSESSVLD	(1 << 18)
+#define OMAP_OTG_VBUSVLD	(1 << 17)
+#define OMAP_OTG_ID		(1 << 16)
+#define OMAP_OTG_XCEIV_OUTPUTS \
+	(OMAP_OTG_ASESSVLD | OMAP_OTG_BSESSEND | OMAP_OTG_BSESSVLD | \
+	 OMAP_OTG_VBUSVLD  | OMAP_OTG_ID)
+
+static void omap_otg_ctrl(struct otg_device *otg_dev, u32 outputs)
+{
+	u32 l;
+
+	l = readl(otg_dev->base + OMAP_OTG_CTRL);
+	l &= ~OMAP_OTG_XCEIV_OUTPUTS;
+	l |= outputs;
+	writel(l, otg_dev->base + OMAP_OTG_CTRL);
+}
+
+static void omap_otg_set_mode(struct otg_device *otg_dev)
+{
+	if (!otg_dev->id && otg_dev->vbus)
+		/* Set B-session valid. */
+		omap_otg_ctrl(otg_dev, OMAP_OTG_ID | OMAP_OTG_BSESSVLD);
+	else if (otg_dev->vbus)
+		/* Set A-session valid. */
+		omap_otg_ctrl(otg_dev, OMAP_OTG_ASESSVLD);
+	else if (!otg_dev->id)
+		/* Set B-session end to indicate no VBUS. */
+		omap_otg_ctrl(otg_dev, OMAP_OTG_ID | OMAP_OTG_BSESSEND);
+}
+
+static int omap_otg_id_notifier(struct notifier_block *nb,
+				unsigned long event, void *ptr)
+{
+	struct otg_device *otg_dev = container_of(nb, struct otg_device, id_nb);
+
+	otg_dev->id = event;
+	omap_otg_set_mode(otg_dev);
+
+	return NOTIFY_DONE;
+}
+
+static int omap_otg_vbus_notifier(struct notifier_block *nb,
+				  unsigned long event, void *ptr)
+{
+	struct otg_device *otg_dev = container_of(nb, struct otg_device,
+						  vbus_nb);
+
+	otg_dev->vbus = event;
+	omap_otg_set_mode(otg_dev);
+
+	return NOTIFY_DONE;
+}
+
+static int omap_otg_probe(struct platform_device *pdev)
+{
+	const struct omap_usb_config *config = pdev->dev.platform_data;
+	struct otg_device *otg_dev;
+	struct extcon_dev *extcon;
+	int ret;
+	u32 rev;
+
+	if (!config || !config->extcon)
+		return -ENODEV;
+
+	extcon = extcon_get_extcon_dev(config->extcon);
+	if (IS_ERR(extcon))
+		return PTR_ERR(extcon);
+
+	otg_dev = devm_kzalloc(&pdev->dev, sizeof(*otg_dev), GFP_KERNEL);
+	if (!otg_dev)
+		return -ENOMEM;
+
+	otg_dev->base = devm_ioremap_resource(&pdev->dev, &pdev->resource[0]);
+	if (IS_ERR(otg_dev->base))
+		return PTR_ERR(otg_dev->base);
+
+	otg_dev->extcon = extcon;
+	otg_dev->id_nb.notifier_call = omap_otg_id_notifier;
+	otg_dev->vbus_nb.notifier_call = omap_otg_vbus_notifier;
+
+	ret = devm_extcon_register_notifier(&pdev->dev, extcon,
+					EXTCON_USB_HOST, &otg_dev->id_nb);
+	if (ret)
+		return ret;
+
+	ret = devm_extcon_register_notifier(&pdev->dev, extcon,
+					EXTCON_USB, &otg_dev->vbus_nb);
+	if (ret) {
+		return ret;
+	}
+
+	otg_dev->id = extcon_get_state(extcon, EXTCON_USB_HOST);
+	otg_dev->vbus = extcon_get_state(extcon, EXTCON_USB);
+	omap_otg_set_mode(otg_dev);
+
+	rev = readl(otg_dev->base);
+
+	dev_info(&pdev->dev,
+		 "OMAP USB OTG controller rev %d.%d (%s, id=%d, vbus=%d)\n",
+		 (rev >> 4) & 0xf, rev & 0xf, config->extcon, otg_dev->id,
+		 otg_dev->vbus);
+
+	platform_set_drvdata(pdev, otg_dev);
+
+	return 0;
+}
+
+static struct platform_driver omap_otg_driver = {
+	.probe		= omap_otg_probe,
+	.driver		= {
+		.name	= "omap_otg",
+	},
+};
+module_platform_driver(omap_otg_driver);
+
+MODULE_DESCRIPTION("OMAP USB OTG controller driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c
new file mode 100644
index 000000000..da63d7e4d
--- /dev/null
+++ b/drivers/usb/phy/phy-tahvo.c
@@ -0,0 +1,440 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Tahvo USB transceiver driver
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * Parts copied from isp1301_omap.c.
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2004 David Brownell
+ *
+ * Original driver written by Juha Yrjölä, Tony Lindgren and Timo Teräs.
+ * Modified for Retu/Tahvo MFD by Aaro Koskinen.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/usb.h>
+#include <linux/extcon-provider.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb/otg.h>
+#include <linux/mfd/retu.h>
+#include <linux/usb/gadget.h>
+#include <linux/platform_device.h>
+
+#define DRIVER_NAME     "tahvo-usb"
+
+#define TAHVO_REG_IDSR	0x02
+#define TAHVO_REG_USBR	0x06
+
+#define USBR_SLAVE_CONTROL	(1 << 8)
+#define USBR_VPPVIO_SW		(1 << 7)
+#define USBR_SPEED		(1 << 6)
+#define USBR_REGOUT		(1 << 5)
+#define USBR_MASTER_SW2		(1 << 4)
+#define USBR_MASTER_SW1		(1 << 3)
+#define USBR_SLAVE_SW		(1 << 2)
+#define USBR_NSUSPEND		(1 << 1)
+#define USBR_SEMODE		(1 << 0)
+
+#define TAHVO_MODE_HOST		0
+#define TAHVO_MODE_PERIPHERAL	1
+
+struct tahvo_usb {
+	struct platform_device	*pt_dev;
+	struct usb_phy		phy;
+	int			vbus_state;
+	struct mutex		serialize;
+	struct clk		*ick;
+	int			irq;
+	int			tahvo_mode;
+	struct extcon_dev	*extcon;
+};
+
+static const unsigned int tahvo_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+
+	EXTCON_NONE,
+};
+
+static ssize_t vbus_show(struct device *device,
+			       struct device_attribute *attr, char *buf)
+{
+	struct tahvo_usb *tu = dev_get_drvdata(device);
+	return sprintf(buf, "%s\n", tu->vbus_state ? "on" : "off");
+}
+static DEVICE_ATTR_RO(vbus);
+
+static void check_vbus_state(struct tahvo_usb *tu)
+{
+	struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
+	int reg, prev_state;
+
+	reg = retu_read(rdev, TAHVO_REG_IDSR);
+	if (reg & TAHVO_STAT_VBUS) {
+		switch (tu->phy.otg->state) {
+		case OTG_STATE_B_IDLE:
+			/* Enable the gadget driver */
+			if (tu->phy.otg->gadget)
+				usb_gadget_vbus_connect(tu->phy.otg->gadget);
+			tu->phy.otg->state = OTG_STATE_B_PERIPHERAL;
+			usb_phy_set_event(&tu->phy, USB_EVENT_ENUMERATED);
+			break;
+		case OTG_STATE_A_IDLE:
+			/*
+			 * Session is now valid assuming the USB hub is driving
+			 * Vbus.
+			 */
+			tu->phy.otg->state = OTG_STATE_A_HOST;
+			break;
+		default:
+			break;
+		}
+		dev_info(&tu->pt_dev->dev, "USB cable connected\n");
+	} else {
+		switch (tu->phy.otg->state) {
+		case OTG_STATE_B_PERIPHERAL:
+			if (tu->phy.otg->gadget)
+				usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
+			tu->phy.otg->state = OTG_STATE_B_IDLE;
+			usb_phy_set_event(&tu->phy, USB_EVENT_NONE);
+			break;
+		case OTG_STATE_A_HOST:
+			tu->phy.otg->state = OTG_STATE_A_IDLE;
+			break;
+		default:
+			break;
+		}
+		dev_info(&tu->pt_dev->dev, "USB cable disconnected\n");
+	}
+
+	prev_state = tu->vbus_state;
+	tu->vbus_state = reg & TAHVO_STAT_VBUS;
+	if (prev_state != tu->vbus_state) {
+		extcon_set_state_sync(tu->extcon, EXTCON_USB, tu->vbus_state);
+		sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state");
+	}
+}
+
+static void tahvo_usb_become_host(struct tahvo_usb *tu)
+{
+	struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
+
+	extcon_set_state_sync(tu->extcon, EXTCON_USB_HOST, true);
+
+	/* Power up the transceiver in USB host mode */
+	retu_write(rdev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
+		   USBR_MASTER_SW2 | USBR_MASTER_SW1);
+	tu->phy.otg->state = OTG_STATE_A_IDLE;
+
+	check_vbus_state(tu);
+}
+
+static void tahvo_usb_stop_host(struct tahvo_usb *tu)
+{
+	tu->phy.otg->state = OTG_STATE_A_IDLE;
+}
+
+static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
+{
+	struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
+
+	extcon_set_state_sync(tu->extcon, EXTCON_USB_HOST, false);
+
+	/* Power up transceiver and set it in USB peripheral mode */
+	retu_write(rdev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT |
+		   USBR_NSUSPEND | USBR_SLAVE_SW);
+	tu->phy.otg->state = OTG_STATE_B_IDLE;
+
+	check_vbus_state(tu);
+}
+
+static void tahvo_usb_stop_peripheral(struct tahvo_usb *tu)
+{
+	if (tu->phy.otg->gadget)
+		usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
+	tu->phy.otg->state = OTG_STATE_B_IDLE;
+}
+
+static void tahvo_usb_power_off(struct tahvo_usb *tu)
+{
+	struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
+
+	/* Disable gadget controller if any */
+	if (tu->phy.otg->gadget)
+		usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
+
+	/* Power off transceiver */
+	retu_write(rdev, TAHVO_REG_USBR, 0);
+	tu->phy.otg->state = OTG_STATE_UNDEFINED;
+}
+
+static int tahvo_usb_set_suspend(struct usb_phy *dev, int suspend)
+{
+	struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, phy);
+	struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
+	u16 w;
+
+	dev_dbg(&tu->pt_dev->dev, "%s\n", __func__);
+
+	w = retu_read(rdev, TAHVO_REG_USBR);
+	if (suspend)
+		w &= ~USBR_NSUSPEND;
+	else
+		w |= USBR_NSUSPEND;
+	retu_write(rdev, TAHVO_REG_USBR, w);
+
+	return 0;
+}
+
+static int tahvo_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	struct tahvo_usb *tu = container_of(otg->usb_phy, struct tahvo_usb,
+					    phy);
+
+	mutex_lock(&tu->serialize);
+
+	if (host == NULL) {
+		if (tu->tahvo_mode == TAHVO_MODE_HOST)
+			tahvo_usb_power_off(tu);
+		otg->host = NULL;
+		mutex_unlock(&tu->serialize);
+		return 0;
+	}
+
+	if (tu->tahvo_mode == TAHVO_MODE_HOST) {
+		otg->host = NULL;
+		tahvo_usb_become_host(tu);
+	}
+
+	otg->host = host;
+
+	mutex_unlock(&tu->serialize);
+
+	return 0;
+}
+
+static int tahvo_usb_set_peripheral(struct usb_otg *otg,
+				    struct usb_gadget *gadget)
+{
+	struct tahvo_usb *tu = container_of(otg->usb_phy, struct tahvo_usb,
+					    phy);
+
+	mutex_lock(&tu->serialize);
+
+	if (!gadget) {
+		if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
+			tahvo_usb_power_off(tu);
+		tu->phy.otg->gadget = NULL;
+		mutex_unlock(&tu->serialize);
+		return 0;
+	}
+
+	tu->phy.otg->gadget = gadget;
+	if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
+		tahvo_usb_become_peripheral(tu);
+
+	mutex_unlock(&tu->serialize);
+
+	return 0;
+}
+
+static irqreturn_t tahvo_usb_vbus_interrupt(int irq, void *_tu)
+{
+	struct tahvo_usb *tu = _tu;
+
+	mutex_lock(&tu->serialize);
+	check_vbus_state(tu);
+	mutex_unlock(&tu->serialize);
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t otg_mode_show(struct device *device,
+			     struct device_attribute *attr, char *buf)
+{
+	struct tahvo_usb *tu = dev_get_drvdata(device);
+
+	switch (tu->tahvo_mode) {
+	case TAHVO_MODE_HOST:
+		return sprintf(buf, "host\n");
+	case TAHVO_MODE_PERIPHERAL:
+		return sprintf(buf, "peripheral\n");
+	}
+
+	return -EINVAL;
+}
+
+static ssize_t otg_mode_store(struct device *device,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct tahvo_usb *tu = dev_get_drvdata(device);
+	int r;
+
+	mutex_lock(&tu->serialize);
+	if (count >= 4 && strncmp(buf, "host", 4) == 0) {
+		if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
+			tahvo_usb_stop_peripheral(tu);
+		tu->tahvo_mode = TAHVO_MODE_HOST;
+		if (tu->phy.otg->host) {
+			dev_info(device, "HOST mode: host controller present\n");
+			tahvo_usb_become_host(tu);
+		} else {
+			dev_info(device, "HOST mode: no host controller, powering off\n");
+			tahvo_usb_power_off(tu);
+		}
+		r = strlen(buf);
+	} else if (count >= 10 && strncmp(buf, "peripheral", 10) == 0) {
+		if (tu->tahvo_mode == TAHVO_MODE_HOST)
+			tahvo_usb_stop_host(tu);
+		tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
+		if (tu->phy.otg->gadget) {
+			dev_info(device, "PERIPHERAL mode: gadget driver present\n");
+			tahvo_usb_become_peripheral(tu);
+		} else {
+			dev_info(device, "PERIPHERAL mode: no gadget driver, powering off\n");
+			tahvo_usb_power_off(tu);
+		}
+		r = strlen(buf);
+	} else {
+		r = -EINVAL;
+	}
+	mutex_unlock(&tu->serialize);
+
+	return r;
+}
+static DEVICE_ATTR_RW(otg_mode);
+
+static struct attribute *tahvo_attrs[] = {
+	&dev_attr_vbus.attr,
+	&dev_attr_otg_mode.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(tahvo);
+
+static int tahvo_usb_probe(struct platform_device *pdev)
+{
+	struct retu_dev *rdev = dev_get_drvdata(pdev->dev.parent);
+	struct tahvo_usb *tu;
+	int ret;
+
+	tu = devm_kzalloc(&pdev->dev, sizeof(*tu), GFP_KERNEL);
+	if (!tu)
+		return -ENOMEM;
+
+	tu->phy.otg = devm_kzalloc(&pdev->dev, sizeof(*tu->phy.otg),
+				   GFP_KERNEL);
+	if (!tu->phy.otg)
+		return -ENOMEM;
+
+	tu->pt_dev = pdev;
+
+	/* Default mode */
+#ifdef CONFIG_TAHVO_USB_HOST_BY_DEFAULT
+	tu->tahvo_mode = TAHVO_MODE_HOST;
+#else
+	tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
+#endif
+
+	mutex_init(&tu->serialize);
+
+	tu->ick = devm_clk_get(&pdev->dev, "usb_l4_ick");
+	if (!IS_ERR(tu->ick))
+		clk_enable(tu->ick);
+
+	/*
+	 * Set initial state, so that we generate kevents only on state changes.
+	 */
+	tu->vbus_state = retu_read(rdev, TAHVO_REG_IDSR) & TAHVO_STAT_VBUS;
+
+	tu->extcon = devm_extcon_dev_allocate(&pdev->dev, tahvo_cable);
+	if (IS_ERR(tu->extcon)) {
+		dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
+		ret = PTR_ERR(tu->extcon);
+		goto err_disable_clk;
+	}
+
+	ret = devm_extcon_dev_register(&pdev->dev, tu->extcon);
+	if (ret) {
+		dev_err(&pdev->dev, "could not register extcon device: %d\n",
+			ret);
+		goto err_disable_clk;
+	}
+
+	/* Set the initial cable state. */
+	extcon_set_state_sync(tu->extcon, EXTCON_USB_HOST,
+			       tu->tahvo_mode == TAHVO_MODE_HOST);
+	extcon_set_state_sync(tu->extcon, EXTCON_USB, tu->vbus_state);
+
+	/* Create OTG interface */
+	tahvo_usb_power_off(tu);
+	tu->phy.dev = &pdev->dev;
+	tu->phy.otg->state = OTG_STATE_UNDEFINED;
+	tu->phy.label = DRIVER_NAME;
+	tu->phy.set_suspend = tahvo_usb_set_suspend;
+
+	tu->phy.otg->usb_phy = &tu->phy;
+	tu->phy.otg->set_host = tahvo_usb_set_host;
+	tu->phy.otg->set_peripheral = tahvo_usb_set_peripheral;
+
+	ret = usb_add_phy(&tu->phy, USB_PHY_TYPE_USB2);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "cannot register USB transceiver: %d\n",
+			ret);
+		goto err_disable_clk;
+	}
+
+	dev_set_drvdata(&pdev->dev, tu);
+
+	tu->irq = ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		goto err_remove_phy;
+	ret = request_threaded_irq(tu->irq, NULL, tahvo_usb_vbus_interrupt,
+				   IRQF_ONESHOT,
+				   "tahvo-vbus", tu);
+	if (ret) {
+		dev_err(&pdev->dev, "could not register tahvo-vbus irq: %d\n",
+			ret);
+		goto err_remove_phy;
+	}
+
+	return 0;
+
+err_remove_phy:
+	usb_remove_phy(&tu->phy);
+err_disable_clk:
+	if (!IS_ERR(tu->ick))
+		clk_disable(tu->ick);
+
+	return ret;
+}
+
+static int tahvo_usb_remove(struct platform_device *pdev)
+{
+	struct tahvo_usb *tu = platform_get_drvdata(pdev);
+
+	free_irq(tu->irq, tu);
+	usb_remove_phy(&tu->phy);
+	if (!IS_ERR(tu->ick))
+		clk_disable(tu->ick);
+
+	return 0;
+}
+
+static struct platform_driver tahvo_usb_driver = {
+	.probe		= tahvo_usb_probe,
+	.remove		= tahvo_usb_remove,
+	.driver		= {
+		.name	= "tahvo-usb",
+		.dev_groups = tahvo_groups,
+	},
+};
+module_platform_driver(tahvo_usb_driver);
+
+MODULE_DESCRIPTION("Tahvo USB transceiver driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Juha Yrjölä, Tony Lindgren, and Timo Teräs");
+MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
new file mode 100644
index 000000000..f0240107e
--- /dev/null
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -0,0 +1,1509 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2013 NVIDIA Corporation
+ *
+ * Author:
+ *	Erik Gilling <konkers@google.com>
+ *	Benoit Goby <benoit@android.com>
+ *	Venu Byravarasu <vbyravarasu@nvidia.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <linux/regulator/consumer.h>
+
+#include <linux/usb/ehci_def.h>
+#include <linux/usb/of.h>
+#include <linux/usb/tegra_usb_phy.h>
+#include <linux/usb/ulpi.h>
+
+#define ULPI_VIEWPORT				0x170
+
+/* PORTSC PTS/PHCD bits, Tegra20 only */
+#define TEGRA_USB_PORTSC1			0x184
+#define TEGRA_USB_PORTSC1_PTS(x)		(((x) & 0x3) << 30)
+#define TEGRA_USB_PORTSC1_PHCD			BIT(23)
+
+/* HOSTPC1 PTS/PHCD bits, Tegra30 and above */
+#define TEGRA_USB_HOSTPC1_DEVLC			0x1b4
+#define TEGRA_USB_HOSTPC1_DEVLC_PTS(x)		(((x) & 0x7) << 29)
+#define TEGRA_USB_HOSTPC1_DEVLC_PHCD		BIT(22)
+
+/* Bits of PORTSC1, which will get cleared by writing 1 into them */
+#define TEGRA_PORTSC1_RWC_BITS	(PORT_CSC | PORT_PEC | PORT_OCC)
+
+#define USB_SUSP_CTRL				0x400
+#define   USB_WAKE_ON_RESUME_EN			BIT(2)
+#define   USB_WAKE_ON_CNNT_EN_DEV		BIT(3)
+#define   USB_WAKE_ON_DISCON_EN_DEV		BIT(4)
+#define   USB_SUSP_CLR				BIT(5)
+#define   USB_PHY_CLK_VALID			BIT(7)
+#define   UTMIP_RESET				BIT(11)
+#define   UHSIC_RESET				BIT(11)
+#define   UTMIP_PHY_ENABLE			BIT(12)
+#define   ULPI_PHY_ENABLE			BIT(13)
+#define   USB_SUSP_SET				BIT(14)
+#define   USB_WAKEUP_DEBOUNCE_COUNT(x)		(((x) & 0x7) << 16)
+
+#define USB_PHY_VBUS_SENSORS			0x404
+#define   B_SESS_VLD_WAKEUP_EN			BIT(14)
+#define   A_SESS_VLD_WAKEUP_EN			BIT(22)
+#define   A_VBUS_VLD_WAKEUP_EN			BIT(30)
+
+#define USB_PHY_VBUS_WAKEUP_ID			0x408
+#define   ID_INT_EN				BIT(0)
+#define   ID_CHG_DET				BIT(1)
+#define   VBUS_WAKEUP_INT_EN			BIT(8)
+#define   VBUS_WAKEUP_CHG_DET			BIT(9)
+#define   VBUS_WAKEUP_STS			BIT(10)
+#define   VBUS_WAKEUP_WAKEUP_EN			BIT(30)
+
+#define USB1_LEGACY_CTRL			0x410
+#define   USB1_NO_LEGACY_MODE			BIT(0)
+#define   USB1_VBUS_SENSE_CTL_MASK		(3 << 1)
+#define   USB1_VBUS_SENSE_CTL_VBUS_WAKEUP	(0 << 1)
+#define   USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \
+						(1 << 1)
+#define   USB1_VBUS_SENSE_CTL_AB_SESS_VLD	(2 << 1)
+#define   USB1_VBUS_SENSE_CTL_A_SESS_VLD	(3 << 1)
+
+#define ULPI_TIMING_CTRL_0			0x424
+#define   ULPI_OUTPUT_PINMUX_BYP		BIT(10)
+#define   ULPI_CLKOUT_PINMUX_BYP		BIT(11)
+
+#define ULPI_TIMING_CTRL_1			0x428
+#define   ULPI_DATA_TRIMMER_LOAD		BIT(0)
+#define   ULPI_DATA_TRIMMER_SEL(x)		(((x) & 0x7) << 1)
+#define   ULPI_STPDIRNXT_TRIMMER_LOAD		BIT(16)
+#define   ULPI_STPDIRNXT_TRIMMER_SEL(x)		(((x) & 0x7) << 17)
+#define   ULPI_DIR_TRIMMER_LOAD			BIT(24)
+#define   ULPI_DIR_TRIMMER_SEL(x)		(((x) & 0x7) << 25)
+
+#define UTMIP_PLL_CFG1				0x804
+#define   UTMIP_XTAL_FREQ_COUNT(x)		(((x) & 0xfff) << 0)
+#define   UTMIP_PLLU_ENABLE_DLY_COUNT(x)	(((x) & 0x1f) << 27)
+
+#define UTMIP_XCVR_CFG0				0x808
+#define   UTMIP_XCVR_SETUP(x)			(((x) & 0xf) << 0)
+#define   UTMIP_XCVR_SETUP_MSB(x)		((((x) & 0x70) >> 4) << 22)
+#define   UTMIP_XCVR_LSRSLEW(x)			(((x) & 0x3) << 8)
+#define   UTMIP_XCVR_LSFSLEW(x)			(((x) & 0x3) << 10)
+#define   UTMIP_FORCE_PD_POWERDOWN		BIT(14)
+#define   UTMIP_FORCE_PD2_POWERDOWN		BIT(16)
+#define   UTMIP_FORCE_PDZI_POWERDOWN		BIT(18)
+#define   UTMIP_XCVR_LSBIAS_SEL			BIT(21)
+#define   UTMIP_XCVR_HSSLEW(x)			(((x) & 0x3) << 4)
+#define   UTMIP_XCVR_HSSLEW_MSB(x)		((((x) & 0x1fc) >> 2) << 25)
+
+#define UTMIP_BIAS_CFG0				0x80c
+#define   UTMIP_OTGPD				BIT(11)
+#define   UTMIP_BIASPD				BIT(10)
+#define   UTMIP_HSSQUELCH_LEVEL(x)		(((x) & 0x3) << 0)
+#define   UTMIP_HSDISCON_LEVEL(x)		(((x) & 0x3) << 2)
+#define   UTMIP_HSDISCON_LEVEL_MSB(x)		((((x) & 0x4) >> 2) << 24)
+
+#define UTMIP_HSRX_CFG0				0x810
+#define   UTMIP_ELASTIC_LIMIT(x)		(((x) & 0x1f) << 10)
+#define   UTMIP_IDLE_WAIT(x)			(((x) & 0x1f) << 15)
+
+#define UTMIP_HSRX_CFG1				0x814
+#define   UTMIP_HS_SYNC_START_DLY(x)		(((x) & 0x1f) << 1)
+
+#define UTMIP_TX_CFG0				0x820
+#define   UTMIP_FS_PREABMLE_J			BIT(19)
+#define   UTMIP_HS_DISCON_DISABLE		BIT(8)
+
+#define UTMIP_MISC_CFG0				0x824
+#define   UTMIP_DPDM_OBSERVE			BIT(26)
+#define   UTMIP_DPDM_OBSERVE_SEL(x)		(((x) & 0xf) << 27)
+#define   UTMIP_DPDM_OBSERVE_SEL_FS_J		UTMIP_DPDM_OBSERVE_SEL(0xf)
+#define   UTMIP_DPDM_OBSERVE_SEL_FS_K		UTMIP_DPDM_OBSERVE_SEL(0xe)
+#define   UTMIP_DPDM_OBSERVE_SEL_FS_SE1		UTMIP_DPDM_OBSERVE_SEL(0xd)
+#define   UTMIP_DPDM_OBSERVE_SEL_FS_SE0		UTMIP_DPDM_OBSERVE_SEL(0xc)
+#define   UTMIP_SUSPEND_EXIT_ON_EDGE		BIT(22)
+
+#define UTMIP_MISC_CFG1				0x828
+#define   UTMIP_PLL_ACTIVE_DLY_COUNT(x)		(((x) & 0x1f) << 18)
+#define   UTMIP_PLLU_STABLE_COUNT(x)		(((x) & 0xfff) << 6)
+
+#define UTMIP_DEBOUNCE_CFG0			0x82c
+#define   UTMIP_BIAS_DEBOUNCE_A(x)		(((x) & 0xffff) << 0)
+
+#define UTMIP_BAT_CHRG_CFG0			0x830
+#define   UTMIP_PD_CHRG				BIT(0)
+
+#define UTMIP_SPARE_CFG0			0x834
+#define   FUSE_SETUP_SEL			BIT(3)
+
+#define UTMIP_XCVR_CFG1				0x838
+#define   UTMIP_FORCE_PDDISC_POWERDOWN		BIT(0)
+#define   UTMIP_FORCE_PDCHRP_POWERDOWN		BIT(2)
+#define   UTMIP_FORCE_PDDR_POWERDOWN		BIT(4)
+#define   UTMIP_XCVR_TERM_RANGE_ADJ(x)		(((x) & 0xf) << 18)
+
+#define UTMIP_BIAS_CFG1				0x83c
+#define   UTMIP_BIAS_PDTRK_COUNT(x)		(((x) & 0x1f) << 3)
+
+/* For Tegra30 and above only, the address is different in Tegra20 */
+#define USB_USBMODE				0x1f8
+#define   USB_USBMODE_MASK			(3 << 0)
+#define   USB_USBMODE_HOST			(3 << 0)
+#define   USB_USBMODE_DEVICE			(2 << 0)
+
+#define PMC_USB_AO				0xf0
+#define   VBUS_WAKEUP_PD_P0			BIT(2)
+#define   ID_PD_P0				BIT(3)
+
+static DEFINE_SPINLOCK(utmip_pad_lock);
+static unsigned int utmip_pad_count;
+
+struct tegra_xtal_freq {
+	unsigned int freq;
+	u8 enable_delay;
+	u8 stable_count;
+	u8 active_delay;
+	u8 xtal_freq_count;
+	u16 debounce;
+};
+
+static const struct tegra_xtal_freq tegra_freq_table[] = {
+	{
+		.freq = 12000000,
+		.enable_delay = 0x02,
+		.stable_count = 0x2F,
+		.active_delay = 0x04,
+		.xtal_freq_count = 0x76,
+		.debounce = 0x7530,
+	},
+	{
+		.freq = 13000000,
+		.enable_delay = 0x02,
+		.stable_count = 0x33,
+		.active_delay = 0x05,
+		.xtal_freq_count = 0x7F,
+		.debounce = 0x7EF4,
+	},
+	{
+		.freq = 19200000,
+		.enable_delay = 0x03,
+		.stable_count = 0x4B,
+		.active_delay = 0x06,
+		.xtal_freq_count = 0xBB,
+		.debounce = 0xBB80,
+	},
+	{
+		.freq = 26000000,
+		.enable_delay = 0x04,
+		.stable_count = 0x66,
+		.active_delay = 0x09,
+		.xtal_freq_count = 0xFE,
+		.debounce = 0xFDE8,
+	},
+};
+
+static inline struct tegra_usb_phy *to_tegra_usb_phy(struct usb_phy *u_phy)
+{
+	return container_of(u_phy, struct tegra_usb_phy, u_phy);
+}
+
+static void set_pts(struct tegra_usb_phy *phy, u8 pts_val)
+{
+	void __iomem *base = phy->regs;
+	u32 val;
+
+	if (phy->soc_config->has_hostpc) {
+		val = readl_relaxed(base + TEGRA_USB_HOSTPC1_DEVLC);
+		val &= ~TEGRA_USB_HOSTPC1_DEVLC_PTS(~0);
+		val |= TEGRA_USB_HOSTPC1_DEVLC_PTS(pts_val);
+		writel_relaxed(val, base + TEGRA_USB_HOSTPC1_DEVLC);
+	} else {
+		val = readl_relaxed(base + TEGRA_USB_PORTSC1);
+		val &= ~TEGRA_PORTSC1_RWC_BITS;
+		val &= ~TEGRA_USB_PORTSC1_PTS(~0);
+		val |= TEGRA_USB_PORTSC1_PTS(pts_val);
+		writel_relaxed(val, base + TEGRA_USB_PORTSC1);
+	}
+}
+
+static void set_phcd(struct tegra_usb_phy *phy, bool enable)
+{
+	void __iomem *base = phy->regs;
+	u32 val;
+
+	if (phy->soc_config->has_hostpc) {
+		val = readl_relaxed(base + TEGRA_USB_HOSTPC1_DEVLC);
+		if (enable)
+			val |= TEGRA_USB_HOSTPC1_DEVLC_PHCD;
+		else
+			val &= ~TEGRA_USB_HOSTPC1_DEVLC_PHCD;
+		writel_relaxed(val, base + TEGRA_USB_HOSTPC1_DEVLC);
+	} else {
+		val = readl_relaxed(base + TEGRA_USB_PORTSC1) & ~PORT_RWC_BITS;
+		if (enable)
+			val |= TEGRA_USB_PORTSC1_PHCD;
+		else
+			val &= ~TEGRA_USB_PORTSC1_PHCD;
+		writel_relaxed(val, base + TEGRA_USB_PORTSC1);
+	}
+}
+
+static int utmip_pad_open(struct tegra_usb_phy *phy)
+{
+	int ret;
+
+	ret = clk_prepare_enable(phy->pad_clk);
+	if (ret) {
+		dev_err(phy->u_phy.dev,
+			"Failed to enable UTMI-pads clock: %d\n", ret);
+		return ret;
+	}
+
+	spin_lock(&utmip_pad_lock);
+
+	ret = reset_control_deassert(phy->pad_rst);
+	if (ret) {
+		dev_err(phy->u_phy.dev,
+			"Failed to initialize UTMI-pads reset: %d\n", ret);
+		goto unlock;
+	}
+
+	ret = reset_control_assert(phy->pad_rst);
+	if (ret) {
+		dev_err(phy->u_phy.dev,
+			"Failed to assert UTMI-pads reset: %d\n", ret);
+		goto unlock;
+	}
+
+	udelay(1);
+
+	ret = reset_control_deassert(phy->pad_rst);
+	if (ret)
+		dev_err(phy->u_phy.dev,
+			"Failed to deassert UTMI-pads reset: %d\n", ret);
+unlock:
+	spin_unlock(&utmip_pad_lock);
+
+	clk_disable_unprepare(phy->pad_clk);
+
+	return ret;
+}
+
+static int utmip_pad_close(struct tegra_usb_phy *phy)
+{
+	int ret;
+
+	ret = clk_prepare_enable(phy->pad_clk);
+	if (ret) {
+		dev_err(phy->u_phy.dev,
+			"Failed to enable UTMI-pads clock: %d\n", ret);
+		return ret;
+	}
+
+	ret = reset_control_assert(phy->pad_rst);
+	if (ret)
+		dev_err(phy->u_phy.dev,
+			"Failed to assert UTMI-pads reset: %d\n", ret);
+
+	udelay(1);
+
+	clk_disable_unprepare(phy->pad_clk);
+
+	return ret;
+}
+
+static int utmip_pad_power_on(struct tegra_usb_phy *phy)
+{
+	struct tegra_utmip_config *config = phy->config;
+	void __iomem *base = phy->pad_regs;
+	u32 val;
+	int err;
+
+	err = clk_prepare_enable(phy->pad_clk);
+	if (err)
+		return err;
+
+	spin_lock(&utmip_pad_lock);
+
+	if (utmip_pad_count++ == 0) {
+		val = readl_relaxed(base + UTMIP_BIAS_CFG0);
+		val &= ~(UTMIP_OTGPD | UTMIP_BIASPD);
+
+		if (phy->soc_config->requires_extra_tuning_parameters) {
+			val &= ~(UTMIP_HSSQUELCH_LEVEL(~0) |
+				UTMIP_HSDISCON_LEVEL(~0) |
+				UTMIP_HSDISCON_LEVEL_MSB(~0));
+
+			val |= UTMIP_HSSQUELCH_LEVEL(config->hssquelch_level);
+			val |= UTMIP_HSDISCON_LEVEL(config->hsdiscon_level);
+			val |= UTMIP_HSDISCON_LEVEL_MSB(config->hsdiscon_level);
+		}
+		writel_relaxed(val, base + UTMIP_BIAS_CFG0);
+	}
+
+	if (phy->pad_wakeup) {
+		phy->pad_wakeup = false;
+		utmip_pad_count--;
+	}
+
+	spin_unlock(&utmip_pad_lock);
+
+	clk_disable_unprepare(phy->pad_clk);
+
+	return 0;
+}
+
+static int utmip_pad_power_off(struct tegra_usb_phy *phy)
+{
+	void __iomem *base = phy->pad_regs;
+	u32 val;
+	int ret;
+
+	ret = clk_prepare_enable(phy->pad_clk);
+	if (ret)
+		return ret;
+
+	spin_lock(&utmip_pad_lock);
+
+	if (!utmip_pad_count) {
+		dev_err(phy->u_phy.dev, "UTMIP pad already powered off\n");
+		ret = -EINVAL;
+		goto ulock;
+	}
+
+	/*
+	 * In accordance to TRM, OTG and Bias pad circuits could be turned off
+	 * to save power if wake is enabled, but the VBUS-change detection
+	 * method is board-specific and these circuits may need to be enabled
+	 * to generate wakeup event, hence we will just keep them both enabled.
+	 */
+	if (phy->wakeup_enabled) {
+		phy->pad_wakeup = true;
+		utmip_pad_count++;
+	}
+
+	if (--utmip_pad_count == 0) {
+		val = readl_relaxed(base + UTMIP_BIAS_CFG0);
+		val |= UTMIP_OTGPD | UTMIP_BIASPD;
+		writel_relaxed(val, base + UTMIP_BIAS_CFG0);
+	}
+ulock:
+	spin_unlock(&utmip_pad_lock);
+
+	clk_disable_unprepare(phy->pad_clk);
+
+	return ret;
+}
+
+static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result)
+{
+	u32 tmp;
+
+	return readl_relaxed_poll_timeout(reg, tmp, (tmp & mask) == result,
+					  2000, 6000);
+}
+
+static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
+{
+	void __iomem *base = phy->regs;
+	u32 val;
+
+	/*
+	 * The USB driver may have already initiated the phy clock
+	 * disable so wait to see if the clock turns off and if not
+	 * then proceed with gating the clock.
+	 */
+	if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) == 0)
+		return;
+
+	if (phy->is_legacy_phy) {
+		val = readl_relaxed(base + USB_SUSP_CTRL);
+		val |= USB_SUSP_SET;
+		writel_relaxed(val, base + USB_SUSP_CTRL);
+
+		usleep_range(10, 100);
+
+		val = readl_relaxed(base + USB_SUSP_CTRL);
+		val &= ~USB_SUSP_SET;
+		writel_relaxed(val, base + USB_SUSP_CTRL);
+	} else {
+		set_phcd(phy, true);
+	}
+
+	if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0))
+		dev_err(phy->u_phy.dev,
+			"Timeout waiting for PHY to stabilize on disable\n");
+}
+
+static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
+{
+	void __iomem *base = phy->regs;
+	u32 val;
+
+	/*
+	 * The USB driver may have already initiated the phy clock
+	 * enable so wait to see if the clock turns on and if not
+	 * then proceed with ungating the clock.
+	 */
+	if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
+			       USB_PHY_CLK_VALID) == 0)
+		return;
+
+	if (phy->is_legacy_phy) {
+		val = readl_relaxed(base + USB_SUSP_CTRL);
+		val |= USB_SUSP_CLR;
+		writel_relaxed(val, base + USB_SUSP_CTRL);
+
+		usleep_range(10, 100);
+
+		val = readl_relaxed(base + USB_SUSP_CTRL);
+		val &= ~USB_SUSP_CLR;
+		writel_relaxed(val, base + USB_SUSP_CTRL);
+	} else {
+		set_phcd(phy, false);
+	}
+
+	if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
+			       USB_PHY_CLK_VALID))
+		dev_err(phy->u_phy.dev,
+			"Timeout waiting for PHY to stabilize on enable\n");
+}
+
+static int utmi_phy_power_on(struct tegra_usb_phy *phy)
+{
+	struct tegra_utmip_config *config = phy->config;
+	void __iomem *base = phy->regs;
+	u32 val;
+	int err;
+
+	val = readl_relaxed(base + USB_SUSP_CTRL);
+	val |= UTMIP_RESET;
+	writel_relaxed(val, base + USB_SUSP_CTRL);
+
+	if (phy->is_legacy_phy) {
+		val = readl_relaxed(base + USB1_LEGACY_CTRL);
+		val |= USB1_NO_LEGACY_MODE;
+		writel_relaxed(val, base + USB1_LEGACY_CTRL);
+	}
+
+	val = readl_relaxed(base + UTMIP_TX_CFG0);
+	val |= UTMIP_FS_PREABMLE_J;
+	writel_relaxed(val, base + UTMIP_TX_CFG0);
+
+	val = readl_relaxed(base + UTMIP_HSRX_CFG0);
+	val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0));
+	val |= UTMIP_IDLE_WAIT(config->idle_wait_delay);
+	val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit);
+	writel_relaxed(val, base + UTMIP_HSRX_CFG0);
+
+	val = readl_relaxed(base + UTMIP_HSRX_CFG1);
+	val &= ~UTMIP_HS_SYNC_START_DLY(~0);
+	val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay);
+	writel_relaxed(val, base + UTMIP_HSRX_CFG1);
+
+	val = readl_relaxed(base + UTMIP_DEBOUNCE_CFG0);
+	val &= ~UTMIP_BIAS_DEBOUNCE_A(~0);
+	val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce);
+	writel_relaxed(val, base + UTMIP_DEBOUNCE_CFG0);
+
+	val = readl_relaxed(base + UTMIP_MISC_CFG0);
+	val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE;
+	writel_relaxed(val, base + UTMIP_MISC_CFG0);
+
+	if (!phy->soc_config->utmi_pll_config_in_car_module) {
+		val = readl_relaxed(base + UTMIP_MISC_CFG1);
+		val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) |
+			UTMIP_PLLU_STABLE_COUNT(~0));
+		val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) |
+			UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count);
+		writel_relaxed(val, base + UTMIP_MISC_CFG1);
+
+		val = readl_relaxed(base + UTMIP_PLL_CFG1);
+		val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) |
+			UTMIP_PLLU_ENABLE_DLY_COUNT(~0));
+		val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) |
+			UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay);
+		writel_relaxed(val, base + UTMIP_PLL_CFG1);
+	}
+
+	val = readl_relaxed(base + USB_SUSP_CTRL);
+	val &= ~USB_WAKE_ON_RESUME_EN;
+	writel_relaxed(val, base + USB_SUSP_CTRL);
+
+	if (phy->mode != USB_DR_MODE_HOST) {
+		val = readl_relaxed(base + USB_SUSP_CTRL);
+		val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
+		writel_relaxed(val, base + USB_SUSP_CTRL);
+
+		val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+		val &= ~VBUS_WAKEUP_WAKEUP_EN;
+		val &= ~(ID_CHG_DET | VBUS_WAKEUP_CHG_DET);
+		writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+		val = readl_relaxed(base + USB_PHY_VBUS_SENSORS);
+		val &= ~(A_VBUS_VLD_WAKEUP_EN | A_SESS_VLD_WAKEUP_EN);
+		val &= ~(B_SESS_VLD_WAKEUP_EN);
+		writel_relaxed(val, base + USB_PHY_VBUS_SENSORS);
+
+		val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0);
+		val &= ~UTMIP_PD_CHRG;
+		writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0);
+	} else {
+		val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0);
+		val |= UTMIP_PD_CHRG;
+		writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0);
+	}
+
+	err = utmip_pad_power_on(phy);
+	if (err)
+		return err;
+
+	val = readl_relaxed(base + UTMIP_XCVR_CFG0);
+	val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
+		 UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_LSBIAS_SEL |
+		 UTMIP_XCVR_SETUP(~0) | UTMIP_XCVR_SETUP_MSB(~0) |
+		 UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0));
+
+	if (!config->xcvr_setup_use_fuses) {
+		val |= UTMIP_XCVR_SETUP(config->xcvr_setup);
+		val |= UTMIP_XCVR_SETUP_MSB(config->xcvr_setup);
+	}
+	val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew);
+	val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew);
+
+	if (phy->soc_config->requires_extra_tuning_parameters) {
+		val &= ~(UTMIP_XCVR_HSSLEW(~0) | UTMIP_XCVR_HSSLEW_MSB(~0));
+		val |= UTMIP_XCVR_HSSLEW(config->xcvr_hsslew);
+		val |= UTMIP_XCVR_HSSLEW_MSB(config->xcvr_hsslew);
+	}
+	writel_relaxed(val, base + UTMIP_XCVR_CFG0);
+
+	val = readl_relaxed(base + UTMIP_XCVR_CFG1);
+	val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
+		 UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0));
+	val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj);
+	writel_relaxed(val, base + UTMIP_XCVR_CFG1);
+
+	val = readl_relaxed(base + UTMIP_BIAS_CFG1);
+	val &= ~UTMIP_BIAS_PDTRK_COUNT(~0);
+	val |= UTMIP_BIAS_PDTRK_COUNT(0x5);
+	writel_relaxed(val, base + UTMIP_BIAS_CFG1);
+
+	val = readl_relaxed(base + UTMIP_SPARE_CFG0);
+	if (config->xcvr_setup_use_fuses)
+		val |= FUSE_SETUP_SEL;
+	else
+		val &= ~FUSE_SETUP_SEL;
+	writel_relaxed(val, base + UTMIP_SPARE_CFG0);
+
+	if (!phy->is_legacy_phy) {
+		val = readl_relaxed(base + USB_SUSP_CTRL);
+		val |= UTMIP_PHY_ENABLE;
+		writel_relaxed(val, base + USB_SUSP_CTRL);
+	}
+
+	val = readl_relaxed(base + USB_SUSP_CTRL);
+	val &= ~UTMIP_RESET;
+	writel_relaxed(val, base + USB_SUSP_CTRL);
+
+	if (phy->is_legacy_phy) {
+		val = readl_relaxed(base + USB1_LEGACY_CTRL);
+		val &= ~USB1_VBUS_SENSE_CTL_MASK;
+		val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD;
+		writel_relaxed(val, base + USB1_LEGACY_CTRL);
+
+		val = readl_relaxed(base + USB_SUSP_CTRL);
+		val &= ~USB_SUSP_SET;
+		writel_relaxed(val, base + USB_SUSP_CTRL);
+	}
+
+	utmi_phy_clk_enable(phy);
+
+	if (phy->soc_config->requires_usbmode_setup) {
+		val = readl_relaxed(base + USB_USBMODE);
+		val &= ~USB_USBMODE_MASK;
+		if (phy->mode == USB_DR_MODE_HOST)
+			val |= USB_USBMODE_HOST;
+		else
+			val |= USB_USBMODE_DEVICE;
+		writel_relaxed(val, base + USB_USBMODE);
+	}
+
+	if (!phy->is_legacy_phy)
+		set_pts(phy, 0);
+
+	return 0;
+}
+
+static int utmi_phy_power_off(struct tegra_usb_phy *phy)
+{
+	void __iomem *base = phy->regs;
+	u32 val;
+
+	/*
+	 * Give hardware time to settle down after VBUS disconnection,
+	 * otherwise PHY will immediately wake up from suspend.
+	 */
+	if (phy->wakeup_enabled && phy->mode != USB_DR_MODE_HOST)
+		readl_relaxed_poll_timeout(base + USB_PHY_VBUS_WAKEUP_ID,
+					   val, !(val & VBUS_WAKEUP_STS),
+					   5000, 100000);
+
+	utmi_phy_clk_disable(phy);
+
+	/* PHY won't resume if reset is asserted */
+	if (!phy->wakeup_enabled) {
+		val = readl_relaxed(base + USB_SUSP_CTRL);
+		val |= UTMIP_RESET;
+		writel_relaxed(val, base + USB_SUSP_CTRL);
+	}
+
+	val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0);
+	val |= UTMIP_PD_CHRG;
+	writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0);
+
+	if (!phy->wakeup_enabled) {
+		val = readl_relaxed(base + UTMIP_XCVR_CFG0);
+		val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
+		       UTMIP_FORCE_PDZI_POWERDOWN;
+		writel_relaxed(val, base + UTMIP_XCVR_CFG0);
+	}
+
+	val = readl_relaxed(base + UTMIP_XCVR_CFG1);
+	val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
+	       UTMIP_FORCE_PDDR_POWERDOWN;
+	writel_relaxed(val, base + UTMIP_XCVR_CFG1);
+
+	if (phy->wakeup_enabled) {
+		val = readl_relaxed(base + USB_SUSP_CTRL);
+		val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0);
+		val |= USB_WAKEUP_DEBOUNCE_COUNT(5);
+		val |= USB_WAKE_ON_RESUME_EN;
+		writel_relaxed(val, base + USB_SUSP_CTRL);
+
+		/*
+		 * Ask VBUS sensor to generate wake event once cable is
+		 * connected.
+		 */
+		if (phy->mode != USB_DR_MODE_HOST) {
+			val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+			val |= VBUS_WAKEUP_WAKEUP_EN;
+			val &= ~(ID_CHG_DET | VBUS_WAKEUP_CHG_DET);
+			writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+			val = readl_relaxed(base + USB_PHY_VBUS_SENSORS);
+			val |= A_VBUS_VLD_WAKEUP_EN;
+			writel_relaxed(val, base + USB_PHY_VBUS_SENSORS);
+		}
+	}
+
+	return utmip_pad_power_off(phy);
+}
+
+static void utmi_phy_preresume(struct tegra_usb_phy *phy)
+{
+	void __iomem *base = phy->regs;
+	u32 val;
+
+	val = readl_relaxed(base + UTMIP_TX_CFG0);
+	val |= UTMIP_HS_DISCON_DISABLE;
+	writel_relaxed(val, base + UTMIP_TX_CFG0);
+}
+
+static void utmi_phy_postresume(struct tegra_usb_phy *phy)
+{
+	void __iomem *base = phy->regs;
+	u32 val;
+
+	val = readl_relaxed(base + UTMIP_TX_CFG0);
+	val &= ~UTMIP_HS_DISCON_DISABLE;
+	writel_relaxed(val, base + UTMIP_TX_CFG0);
+}
+
+static void utmi_phy_restore_start(struct tegra_usb_phy *phy,
+				   enum tegra_usb_phy_port_speed port_speed)
+{
+	void __iomem *base = phy->regs;
+	u32 val;
+
+	val = readl_relaxed(base + UTMIP_MISC_CFG0);
+	val &= ~UTMIP_DPDM_OBSERVE_SEL(~0);
+	if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
+		val |= UTMIP_DPDM_OBSERVE_SEL_FS_K;
+	else
+		val |= UTMIP_DPDM_OBSERVE_SEL_FS_J;
+	writel_relaxed(val, base + UTMIP_MISC_CFG0);
+	usleep_range(1, 10);
+
+	val = readl_relaxed(base + UTMIP_MISC_CFG0);
+	val |= UTMIP_DPDM_OBSERVE;
+	writel_relaxed(val, base + UTMIP_MISC_CFG0);
+	usleep_range(10, 100);
+}
+
+static void utmi_phy_restore_end(struct tegra_usb_phy *phy)
+{
+	void __iomem *base = phy->regs;
+	u32 val;
+
+	val = readl_relaxed(base + UTMIP_MISC_CFG0);
+	val &= ~UTMIP_DPDM_OBSERVE;
+	writel_relaxed(val, base + UTMIP_MISC_CFG0);
+	usleep_range(10, 100);
+}
+
+static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
+{
+	void __iomem *base = phy->regs;
+	u32 val;
+	int err;
+
+	gpiod_set_value_cansleep(phy->reset_gpio, 1);
+
+	err = clk_prepare_enable(phy->clk);
+	if (err)
+		return err;
+
+	usleep_range(5000, 6000);
+
+	gpiod_set_value_cansleep(phy->reset_gpio, 0);
+
+	usleep_range(1000, 2000);
+
+	val = readl_relaxed(base + USB_SUSP_CTRL);
+	val |= UHSIC_RESET;
+	writel_relaxed(val, base + USB_SUSP_CTRL);
+
+	val = readl_relaxed(base + ULPI_TIMING_CTRL_0);
+	val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP;
+	writel_relaxed(val, base + ULPI_TIMING_CTRL_0);
+
+	val = readl_relaxed(base + USB_SUSP_CTRL);
+	val |= ULPI_PHY_ENABLE;
+	writel_relaxed(val, base + USB_SUSP_CTRL);
+
+	val = 0;
+	writel_relaxed(val, base + ULPI_TIMING_CTRL_1);
+
+	val |= ULPI_DATA_TRIMMER_SEL(4);
+	val |= ULPI_STPDIRNXT_TRIMMER_SEL(4);
+	val |= ULPI_DIR_TRIMMER_SEL(4);
+	writel_relaxed(val, base + ULPI_TIMING_CTRL_1);
+	usleep_range(10, 100);
+
+	val |= ULPI_DATA_TRIMMER_LOAD;
+	val |= ULPI_STPDIRNXT_TRIMMER_LOAD;
+	val |= ULPI_DIR_TRIMMER_LOAD;
+	writel_relaxed(val, base + ULPI_TIMING_CTRL_1);
+
+	/* Fix VbusInvalid due to floating VBUS */
+	err = usb_phy_io_write(phy->ulpi, 0x40, 0x08);
+	if (err) {
+		dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", err);
+		goto disable_clk;
+	}
+
+	err = usb_phy_io_write(phy->ulpi, 0x80, 0x0B);
+	if (err) {
+		dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", err);
+		goto disable_clk;
+	}
+
+	val = readl_relaxed(base + USB_SUSP_CTRL);
+	val |= USB_SUSP_CLR;
+	writel_relaxed(val, base + USB_SUSP_CTRL);
+	usleep_range(100, 1000);
+
+	val = readl_relaxed(base + USB_SUSP_CTRL);
+	val &= ~USB_SUSP_CLR;
+	writel_relaxed(val, base + USB_SUSP_CTRL);
+
+	return 0;
+
+disable_clk:
+	clk_disable_unprepare(phy->clk);
+
+	return err;
+}
+
+static int ulpi_phy_power_off(struct tegra_usb_phy *phy)
+{
+	gpiod_set_value_cansleep(phy->reset_gpio, 1);
+	usleep_range(5000, 6000);
+	clk_disable_unprepare(phy->clk);
+
+	/*
+	 * Wakeup currently unimplemented for ULPI, thus PHY needs to be
+	 * force-resumed.
+	 */
+	if (WARN_ON_ONCE(phy->wakeup_enabled)) {
+		ulpi_phy_power_on(phy);
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
+{
+	int err;
+
+	if (phy->powered_on)
+		return 0;
+
+	if (phy->is_ulpi_phy)
+		err = ulpi_phy_power_on(phy);
+	else
+		err = utmi_phy_power_on(phy);
+	if (err)
+		return err;
+
+	phy->powered_on = true;
+
+	/* Let PHY settle down */
+	usleep_range(2000, 2500);
+
+	return 0;
+}
+
+static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
+{
+	int err;
+
+	if (!phy->powered_on)
+		return 0;
+
+	if (phy->is_ulpi_phy)
+		err = ulpi_phy_power_off(phy);
+	else
+		err = utmi_phy_power_off(phy);
+	if (err)
+		return err;
+
+	phy->powered_on = false;
+
+	return 0;
+}
+
+static void tegra_usb_phy_shutdown(struct usb_phy *u_phy)
+{
+	struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+
+	if (WARN_ON(!phy->freq))
+		return;
+
+	usb_phy_set_wakeup(u_phy, false);
+	tegra_usb_phy_power_off(phy);
+
+	if (!phy->is_ulpi_phy)
+		utmip_pad_close(phy);
+
+	regulator_disable(phy->vbus);
+	clk_disable_unprepare(phy->pll_u);
+
+	phy->freq = NULL;
+}
+
+static irqreturn_t tegra_usb_phy_isr(int irq, void *data)
+{
+	u32 val, int_mask = ID_CHG_DET | VBUS_WAKEUP_CHG_DET;
+	struct tegra_usb_phy *phy = data;
+	void __iomem *base = phy->regs;
+
+	/*
+	 * The PHY interrupt also wakes the USB controller driver since
+	 * interrupt is shared. We don't do anything in the PHY driver,
+	 * so just clear the interrupt.
+	 */
+	val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+	writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+	return val & int_mask ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int tegra_usb_phy_set_wakeup(struct usb_phy *u_phy, bool enable)
+{
+	struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+	void __iomem *base = phy->regs;
+	int ret = 0;
+	u32 val;
+
+	if (phy->wakeup_enabled && phy->mode != USB_DR_MODE_HOST &&
+	    phy->irq > 0) {
+		disable_irq(phy->irq);
+
+		val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+		val &= ~(ID_INT_EN | VBUS_WAKEUP_INT_EN);
+		writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+		enable_irq(phy->irq);
+
+		free_irq(phy->irq, phy);
+
+		phy->wakeup_enabled = false;
+	}
+
+	if (enable && phy->mode != USB_DR_MODE_HOST && phy->irq > 0) {
+		ret = request_irq(phy->irq, tegra_usb_phy_isr, IRQF_SHARED,
+				  dev_name(phy->u_phy.dev), phy);
+		if (!ret) {
+			disable_irq(phy->irq);
+
+			/*
+			 * USB clock will be resumed once wake event will be
+			 * generated.  The ID-change event requires to have
+			 * interrupts enabled, otherwise it won't be generated.
+			 */
+			val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+			val |= ID_INT_EN | VBUS_WAKEUP_INT_EN;
+			writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+			enable_irq(phy->irq);
+		} else {
+			dev_err(phy->u_phy.dev,
+				"Failed to request interrupt: %d", ret);
+			enable = false;
+		}
+	}
+
+	phy->wakeup_enabled = enable;
+
+	return ret;
+}
+
+static int tegra_usb_phy_set_suspend(struct usb_phy *u_phy, int suspend)
+{
+	struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+	int ret;
+
+	if (WARN_ON(!phy->freq))
+		return -EINVAL;
+
+	/*
+	 * PHY is sharing IRQ with the CI driver, hence here we either
+	 * disable interrupt for both PHY and CI or for CI only.  The
+	 * interrupt needs to be disabled while hardware is reprogrammed
+	 * because interrupt touches the programmed registers, and thus,
+	 * there could be a race condition.
+	 */
+	if (phy->irq > 0)
+		disable_irq(phy->irq);
+
+	if (suspend)
+		ret = tegra_usb_phy_power_off(phy);
+	else
+		ret = tegra_usb_phy_power_on(phy);
+
+	if (phy->irq > 0)
+		enable_irq(phy->irq);
+
+	return ret;
+}
+
+static int tegra_usb_phy_configure_pmc(struct tegra_usb_phy *phy)
+{
+	int err, val = 0;
+
+	/* older device-trees don't have PMC regmap */
+	if (!phy->pmc_regmap)
+		return 0;
+
+	/*
+	 * Tegra20 has a different layout of PMC USB register bits and AO is
+	 * enabled by default after system reset on Tegra20, so assume nothing
+	 * to do on Tegra20.
+	 */
+	if (!phy->soc_config->requires_pmc_ao_power_up)
+		return 0;
+
+	/* enable VBUS wake-up detector */
+	if (phy->mode != USB_DR_MODE_HOST)
+		val |= VBUS_WAKEUP_PD_P0 << phy->instance * 4;
+
+	/* enable ID-pin ACC detector for OTG mode switching */
+	if (phy->mode == USB_DR_MODE_OTG)
+		val |= ID_PD_P0 << phy->instance * 4;
+
+	/* disable detectors to reset them */
+	err = regmap_set_bits(phy->pmc_regmap, PMC_USB_AO, val);
+	if (err) {
+		dev_err(phy->u_phy.dev, "Failed to disable PMC AO: %d\n", err);
+		return err;
+	}
+
+	usleep_range(10, 100);
+
+	/* enable detectors */
+	err = regmap_clear_bits(phy->pmc_regmap, PMC_USB_AO, val);
+	if (err) {
+		dev_err(phy->u_phy.dev, "Failed to enable PMC AO: %d\n", err);
+		return err;
+	}
+
+	/* detectors starts to work after 10ms */
+	usleep_range(10000, 15000);
+
+	return 0;
+}
+
+static int tegra_usb_phy_init(struct usb_phy *u_phy)
+{
+	struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+	unsigned long parent_rate;
+	unsigned int i;
+	int err;
+
+	if (WARN_ON(phy->freq))
+		return 0;
+
+	err = clk_prepare_enable(phy->pll_u);
+	if (err)
+		return err;
+
+	parent_rate = clk_get_rate(clk_get_parent(phy->pll_u));
+	for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) {
+		if (tegra_freq_table[i].freq == parent_rate) {
+			phy->freq = &tegra_freq_table[i];
+			break;
+		}
+	}
+	if (!phy->freq) {
+		dev_err(phy->u_phy.dev, "Invalid pll_u parent rate %ld\n",
+			parent_rate);
+		err = -EINVAL;
+		goto disable_clk;
+	}
+
+	err = regulator_enable(phy->vbus);
+	if (err) {
+		dev_err(phy->u_phy.dev,
+			"Failed to enable USB VBUS regulator: %d\n", err);
+		goto disable_clk;
+	}
+
+	if (!phy->is_ulpi_phy) {
+		err = utmip_pad_open(phy);
+		if (err)
+			goto disable_vbus;
+	}
+
+	err = tegra_usb_phy_configure_pmc(phy);
+	if (err)
+		goto close_phy;
+
+	err = tegra_usb_phy_power_on(phy);
+	if (err)
+		goto close_phy;
+
+	return 0;
+
+close_phy:
+	if (!phy->is_ulpi_phy)
+		utmip_pad_close(phy);
+
+disable_vbus:
+	regulator_disable(phy->vbus);
+
+disable_clk:
+	clk_disable_unprepare(phy->pll_u);
+
+	phy->freq = NULL;
+
+	return err;
+}
+
+void tegra_usb_phy_preresume(struct usb_phy *u_phy)
+{
+	struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+
+	if (!phy->is_ulpi_phy)
+		utmi_phy_preresume(phy);
+}
+EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume);
+
+void tegra_usb_phy_postresume(struct usb_phy *u_phy)
+{
+	struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+
+	if (!phy->is_ulpi_phy)
+		utmi_phy_postresume(phy);
+}
+EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume);
+
+void tegra_ehci_phy_restore_start(struct usb_phy *u_phy,
+				  enum tegra_usb_phy_port_speed port_speed)
+{
+	struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+
+	if (!phy->is_ulpi_phy)
+		utmi_phy_restore_start(phy, port_speed);
+}
+EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start);
+
+void tegra_ehci_phy_restore_end(struct usb_phy *u_phy)
+{
+	struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+
+	if (!phy->is_ulpi_phy)
+		utmi_phy_restore_end(phy);
+}
+EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end);
+
+static int read_utmi_param(struct platform_device *pdev, const char *param,
+			   u8 *dest)
+{
+	u32 value;
+	int err;
+
+	err = of_property_read_u32(pdev->dev.of_node, param, &value);
+	if (err)
+		dev_err(&pdev->dev,
+			"Failed to read USB UTMI parameter %s: %d\n",
+			param, err);
+	else
+		*dest = value;
+
+	return err;
+}
+
+static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy,
+			  struct platform_device *pdev)
+{
+	struct tegra_utmip_config *config;
+	struct resource *res;
+	int err;
+
+	tegra_phy->is_ulpi_phy = false;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get UTMI pad regs\n");
+		return  -ENXIO;
+	}
+
+	/*
+	 * Note that UTMI pad registers are shared by all PHYs, therefore
+	 * devm_platform_ioremap_resource() can't be used here.
+	 */
+	tegra_phy->pad_regs = devm_ioremap(&pdev->dev, res->start,
+					   resource_size(res));
+	if (!tegra_phy->pad_regs) {
+		dev_err(&pdev->dev, "Failed to remap UTMI pad regs\n");
+		return -ENOMEM;
+	}
+
+	tegra_phy->config = devm_kzalloc(&pdev->dev, sizeof(*config),
+					 GFP_KERNEL);
+	if (!tegra_phy->config)
+		return -ENOMEM;
+
+	config = tegra_phy->config;
+
+	err = read_utmi_param(pdev, "nvidia,hssync-start-delay",
+			      &config->hssync_start_delay);
+	if (err)
+		return err;
+
+	err = read_utmi_param(pdev, "nvidia,elastic-limit",
+			      &config->elastic_limit);
+	if (err)
+		return err;
+
+	err = read_utmi_param(pdev, "nvidia,idle-wait-delay",
+			      &config->idle_wait_delay);
+	if (err)
+		return err;
+
+	err = read_utmi_param(pdev, "nvidia,term-range-adj",
+			      &config->term_range_adj);
+	if (err)
+		return err;
+
+	err = read_utmi_param(pdev, "nvidia,xcvr-lsfslew",
+			      &config->xcvr_lsfslew);
+	if (err)
+		return err;
+
+	err = read_utmi_param(pdev, "nvidia,xcvr-lsrslew",
+			      &config->xcvr_lsrslew);
+	if (err)
+		return err;
+
+	if (tegra_phy->soc_config->requires_extra_tuning_parameters) {
+		err = read_utmi_param(pdev, "nvidia,xcvr-hsslew",
+				      &config->xcvr_hsslew);
+		if (err)
+			return err;
+
+		err = read_utmi_param(pdev, "nvidia,hssquelch-level",
+				      &config->hssquelch_level);
+		if (err)
+			return err;
+
+		err = read_utmi_param(pdev, "nvidia,hsdiscon-level",
+				      &config->hsdiscon_level);
+		if (err)
+			return err;
+	}
+
+	config->xcvr_setup_use_fuses = of_property_read_bool(
+		pdev->dev.of_node, "nvidia,xcvr-setup-use-fuses");
+
+	if (!config->xcvr_setup_use_fuses) {
+		err = read_utmi_param(pdev, "nvidia,xcvr-setup",
+				      &config->xcvr_setup);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static void tegra_usb_phy_put_pmc_device(void *dev)
+{
+	put_device(dev);
+}
+
+static int tegra_usb_phy_parse_pmc(struct device *dev,
+				   struct tegra_usb_phy *phy)
+{
+	struct platform_device *pmc_pdev;
+	struct of_phandle_args args;
+	int err;
+
+	err = of_parse_phandle_with_fixed_args(dev->of_node, "nvidia,pmc",
+					       1, 0, &args);
+	if (err) {
+		if (err != -ENOENT)
+			return err;
+
+		dev_warn_once(dev, "nvidia,pmc is missing, please update your device-tree\n");
+		return 0;
+	}
+
+	pmc_pdev = of_find_device_by_node(args.np);
+	of_node_put(args.np);
+	if (!pmc_pdev)
+		return -ENODEV;
+
+	err = devm_add_action_or_reset(dev, tegra_usb_phy_put_pmc_device,
+				       &pmc_pdev->dev);
+	if (err)
+		return err;
+
+	if (!platform_get_drvdata(pmc_pdev))
+		return -EPROBE_DEFER;
+
+	phy->pmc_regmap = dev_get_regmap(&pmc_pdev->dev, "usb_sleepwalk");
+	if (!phy->pmc_regmap)
+		return -EINVAL;
+
+	phy->instance = args.args[0];
+
+	return 0;
+}
+
+static const struct tegra_phy_soc_config tegra20_soc_config = {
+	.utmi_pll_config_in_car_module = false,
+	.has_hostpc = false,
+	.requires_usbmode_setup = false,
+	.requires_extra_tuning_parameters = false,
+	.requires_pmc_ao_power_up = false,
+};
+
+static const struct tegra_phy_soc_config tegra30_soc_config = {
+	.utmi_pll_config_in_car_module = true,
+	.has_hostpc = true,
+	.requires_usbmode_setup = true,
+	.requires_extra_tuning_parameters = true,
+	.requires_pmc_ao_power_up = true,
+};
+
+static const struct of_device_id tegra_usb_phy_id_table[] = {
+	{ .compatible = "nvidia,tegra30-usb-phy", .data = &tegra30_soc_config },
+	{ .compatible = "nvidia,tegra20-usb-phy", .data = &tegra20_soc_config },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tegra_usb_phy_id_table);
+
+static int tegra_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct tegra_usb_phy *tegra_phy;
+	enum usb_phy_interface phy_type;
+	struct reset_control *reset;
+	struct gpio_desc *gpiod;
+	struct resource *res;
+	struct usb_phy *phy;
+	int err;
+
+	tegra_phy = devm_kzalloc(&pdev->dev, sizeof(*tegra_phy), GFP_KERNEL);
+	if (!tegra_phy)
+		return -ENOMEM;
+
+	tegra_phy->soc_config = of_device_get_match_data(&pdev->dev);
+	tegra_phy->irq = platform_get_irq_optional(pdev, 0);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get I/O memory\n");
+		return  -ENXIO;
+	}
+
+	/*
+	 * Note that PHY and USB controller are using shared registers,
+	 * therefore devm_platform_ioremap_resource() can't be used here.
+	 */
+	tegra_phy->regs = devm_ioremap(&pdev->dev, res->start,
+				       resource_size(res));
+	if (!tegra_phy->regs) {
+		dev_err(&pdev->dev, "Failed to remap I/O memory\n");
+		return -ENOMEM;
+	}
+
+	tegra_phy->is_legacy_phy =
+		of_property_read_bool(np, "nvidia,has-legacy-mode");
+
+	if (of_find_property(np, "dr_mode", NULL))
+		tegra_phy->mode = usb_get_dr_mode(&pdev->dev);
+	else
+		tegra_phy->mode = USB_DR_MODE_HOST;
+
+	if (tegra_phy->mode == USB_DR_MODE_UNKNOWN) {
+		dev_err(&pdev->dev, "dr_mode is invalid\n");
+		return -EINVAL;
+	}
+
+	/* On some boards, the VBUS regulator doesn't need to be controlled */
+	tegra_phy->vbus = devm_regulator_get(&pdev->dev, "vbus");
+	if (IS_ERR(tegra_phy->vbus))
+		return PTR_ERR(tegra_phy->vbus);
+
+	tegra_phy->pll_u = devm_clk_get(&pdev->dev, "pll_u");
+	err = PTR_ERR_OR_ZERO(tegra_phy->pll_u);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to get pll_u clock: %d\n", err);
+		return err;
+	}
+
+	err = tegra_usb_phy_parse_pmc(&pdev->dev, tegra_phy);
+	if (err) {
+		dev_err_probe(&pdev->dev, err, "Failed to get PMC regmap\n");
+		return err;
+	}
+
+	phy_type = of_usb_get_phy_mode(np);
+	switch (phy_type) {
+	case USBPHY_INTERFACE_MODE_UTMI:
+		err = utmi_phy_probe(tegra_phy, pdev);
+		if (err)
+			return err;
+
+		tegra_phy->pad_clk = devm_clk_get(&pdev->dev, "utmi-pads");
+		err = PTR_ERR_OR_ZERO(tegra_phy->pad_clk);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Failed to get UTMIP pad clock: %d\n", err);
+			return err;
+		}
+
+		reset = devm_reset_control_get_optional_shared(&pdev->dev,
+							       "utmi-pads");
+		err = PTR_ERR_OR_ZERO(reset);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Failed to get UTMI-pads reset: %d\n", err);
+			return err;
+		}
+		tegra_phy->pad_rst = reset;
+		break;
+
+	case USBPHY_INTERFACE_MODE_ULPI:
+		tegra_phy->is_ulpi_phy = true;
+
+		tegra_phy->clk = devm_clk_get(&pdev->dev, "ulpi-link");
+		err = PTR_ERR_OR_ZERO(tegra_phy->clk);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Failed to get ULPI clock: %d\n", err);
+			return err;
+		}
+
+		gpiod = devm_gpiod_get(&pdev->dev, "nvidia,phy-reset",
+				       GPIOD_OUT_HIGH);
+		err = PTR_ERR_OR_ZERO(gpiod);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Request failed for reset GPIO: %d\n", err);
+			return err;
+		}
+
+		err = gpiod_set_consumer_name(gpiod, "ulpi_phy_reset_b");
+		if (err) {
+			dev_err(&pdev->dev,
+				"Failed to set up reset GPIO name: %d\n", err);
+			return err;
+		}
+
+		tegra_phy->reset_gpio = gpiod;
+
+		phy = devm_otg_ulpi_create(&pdev->dev,
+					   &ulpi_viewport_access_ops, 0);
+		if (!phy) {
+			dev_err(&pdev->dev, "Failed to create ULPI OTG\n");
+			return -ENOMEM;
+		}
+
+		tegra_phy->ulpi = phy;
+		tegra_phy->ulpi->io_priv = tegra_phy->regs + ULPI_VIEWPORT;
+		break;
+
+	default:
+		dev_err(&pdev->dev, "phy_type %u is invalid or unsupported\n",
+			phy_type);
+		return -EINVAL;
+	}
+
+	tegra_phy->u_phy.dev = &pdev->dev;
+	tegra_phy->u_phy.init = tegra_usb_phy_init;
+	tegra_phy->u_phy.shutdown = tegra_usb_phy_shutdown;
+	tegra_phy->u_phy.set_wakeup = tegra_usb_phy_set_wakeup;
+	tegra_phy->u_phy.set_suspend = tegra_usb_phy_set_suspend;
+
+	platform_set_drvdata(pdev, tegra_phy);
+
+	return usb_add_phy_dev(&tegra_phy->u_phy);
+}
+
+static int tegra_usb_phy_remove(struct platform_device *pdev)
+{
+	struct tegra_usb_phy *tegra_phy = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&tegra_phy->u_phy);
+
+	return 0;
+}
+
+static struct platform_driver tegra_usb_phy_driver = {
+	.probe		= tegra_usb_phy_probe,
+	.remove		= tegra_usb_phy_remove,
+	.driver		= {
+		.name	= "tegra-phy",
+		.of_match_table = tegra_usb_phy_id_table,
+	},
+};
+module_platform_driver(tegra_usb_phy_driver);
+
+MODULE_DESCRIPTION("Tegra USB PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
new file mode 100644
index 000000000..ab3c38a7d
--- /dev/null
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Author: Hema HK <hemahk@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/usb/musb.h>
+#include <linux/usb/phy_companion.h>
+#include <linux/phy/omap_usb.h>
+#include <linux/mfd/twl.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+
+/* usb register definitions */
+#define USB_VENDOR_ID_LSB		0x00
+#define USB_VENDOR_ID_MSB		0x01
+#define USB_PRODUCT_ID_LSB		0x02
+#define USB_PRODUCT_ID_MSB		0x03
+#define USB_VBUS_CTRL_SET		0x04
+#define USB_VBUS_CTRL_CLR		0x05
+#define USB_ID_CTRL_SET			0x06
+#define USB_ID_CTRL_CLR			0x07
+#define USB_VBUS_INT_SRC		0x08
+#define USB_VBUS_INT_LATCH_SET		0x09
+#define USB_VBUS_INT_LATCH_CLR		0x0A
+#define USB_VBUS_INT_EN_LO_SET		0x0B
+#define USB_VBUS_INT_EN_LO_CLR		0x0C
+#define USB_VBUS_INT_EN_HI_SET		0x0D
+#define USB_VBUS_INT_EN_HI_CLR		0x0E
+#define USB_ID_INT_SRC			0x0F
+#define USB_ID_INT_LATCH_SET		0x10
+#define USB_ID_INT_LATCH_CLR		0x11
+
+#define USB_ID_INT_EN_LO_SET		0x12
+#define USB_ID_INT_EN_LO_CLR		0x13
+#define USB_ID_INT_EN_HI_SET		0x14
+#define USB_ID_INT_EN_HI_CLR		0x15
+#define USB_OTG_ADP_CTRL		0x16
+#define USB_OTG_ADP_HIGH		0x17
+#define USB_OTG_ADP_LOW			0x18
+#define USB_OTG_ADP_RISE		0x19
+#define USB_OTG_REVISION		0x1A
+
+/* to be moved to LDO */
+#define TWL6030_MISC2			0xE5
+#define TWL6030_CFG_LDO_PD2		0xF5
+#define TWL6030_BACKUP_REG		0xFA
+
+#define STS_HW_CONDITIONS		0x21
+
+/* In module TWL6030_MODULE_PM_MASTER */
+#define STS_HW_CONDITIONS		0x21
+#define STS_USB_ID			BIT(2)
+
+/* In module TWL6030_MODULE_PM_RECEIVER */
+#define VUSB_CFG_TRANS			0x71
+#define VUSB_CFG_STATE			0x72
+#define VUSB_CFG_VOLTAGE		0x73
+
+/* in module TWL6030_MODULE_MAIN_CHARGE */
+
+#define CHARGERUSB_CTRL1		0x8
+
+#define CONTROLLER_STAT1		0x03
+#define	VBUS_DET			BIT(2)
+
+struct twl6030_usb {
+	struct phy_companion	comparator;
+	struct device		*dev;
+
+	/* for vbus reporting with irqs disabled */
+	spinlock_t		lock;
+
+	struct regulator		*usb3v3;
+
+	/* used to check initial cable status after probe */
+	struct delayed_work	get_status_work;
+
+	/* used to set vbus, in atomic path */
+	struct work_struct	set_vbus_work;
+
+	int			irq1;
+	int			irq2;
+	enum musb_vbus_id_status linkstat;
+	u8			asleep;
+	bool			vbus_enable;
+};
+
+#define	comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator)
+
+/*-------------------------------------------------------------------------*/
+
+static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module,
+						u8 data, u8 address)
+{
+	int ret = 0;
+
+	ret = twl_i2c_write_u8(module, data, address);
+	if (ret < 0)
+		dev_err(twl->dev,
+			"Write[0x%x] Error %d\n", address, ret);
+	return ret;
+}
+
+static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
+{
+	u8 data;
+	int ret;
+
+	ret = twl_i2c_read_u8(module, &data, address);
+	if (ret >= 0)
+		ret = data;
+	else
+		dev_err(twl->dev,
+			"readb[0x%x,0x%x] Error %d\n",
+					module, address, ret);
+	return ret;
+}
+
+static int twl6030_start_srp(struct phy_companion *comparator)
+{
+	struct twl6030_usb *twl = comparator_to_twl(comparator);
+
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET);
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET);
+
+	mdelay(100);
+	twl6030_writeb(twl, TWL_MODULE_USB, 0xa0, USB_VBUS_CTRL_CLR);
+
+	return 0;
+}
+
+static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
+{
+	/* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
+	twl6030_writeb(twl, TWL6030_MODULE_ID0, 0x1, TWL6030_BACKUP_REG);
+
+	/* Program CFG_LDO_PD2 register and set VUSB bit */
+	twl6030_writeb(twl, TWL6030_MODULE_ID0, 0x1, TWL6030_CFG_LDO_PD2);
+
+	/* Program MISC2 register and set bit VUSB_IN_VBAT */
+	twl6030_writeb(twl, TWL6030_MODULE_ID0, 0x10, TWL6030_MISC2);
+
+	twl->usb3v3 = regulator_get(twl->dev, "usb");
+	if (IS_ERR(twl->usb3v3))
+		return -ENODEV;
+
+	/* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
+
+	/*
+	 * Program the USB_ID_CTRL_SET register to enable GND drive
+	 * and the ID comparators
+	 */
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET);
+
+	return 0;
+}
+
+static ssize_t vbus_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct twl6030_usb *twl = dev_get_drvdata(dev);
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&twl->lock, flags);
+
+	switch (twl->linkstat) {
+	case MUSB_VBUS_VALID:
+	       ret = snprintf(buf, PAGE_SIZE, "vbus\n");
+	       break;
+	case MUSB_ID_GROUND:
+	       ret = snprintf(buf, PAGE_SIZE, "id\n");
+	       break;
+	case MUSB_VBUS_OFF:
+	       ret = snprintf(buf, PAGE_SIZE, "none\n");
+	       break;
+	default:
+	       ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
+	}
+	spin_unlock_irqrestore(&twl->lock, flags);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(vbus);
+
+static struct attribute *twl6030_attrs[] = {
+	&dev_attr_vbus.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(twl6030);
+
+static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
+{
+	struct twl6030_usb *twl = _twl;
+	enum musb_vbus_id_status status = MUSB_UNKNOWN;
+	u8 vbus_state, hw_state;
+	int ret;
+
+	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+	vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE,
+						CONTROLLER_STAT1);
+	if (!(hw_state & STS_USB_ID)) {
+		if (vbus_state & VBUS_DET) {
+			ret = regulator_enable(twl->usb3v3);
+			if (ret)
+				dev_err(twl->dev, "Failed to enable usb3v3\n");
+
+			twl->asleep = 1;
+			status = MUSB_VBUS_VALID;
+			twl->linkstat = status;
+			ret = musb_mailbox(status);
+			if (ret)
+				twl->linkstat = MUSB_UNKNOWN;
+		} else {
+			if (twl->linkstat != MUSB_UNKNOWN) {
+				status = MUSB_VBUS_OFF;
+				twl->linkstat = status;
+				ret = musb_mailbox(status);
+				if (ret)
+					twl->linkstat = MUSB_UNKNOWN;
+				if (twl->asleep) {
+					regulator_disable(twl->usb3v3);
+					twl->asleep = 0;
+				}
+			}
+		}
+	}
+	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
+{
+	struct twl6030_usb *twl = _twl;
+	enum musb_vbus_id_status status = MUSB_UNKNOWN;
+	u8 hw_state;
+	int ret;
+
+	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+	if (hw_state & STS_USB_ID) {
+		ret = regulator_enable(twl->usb3v3);
+		if (ret)
+			dev_err(twl->dev, "Failed to enable usb3v3\n");
+
+		twl->asleep = 1;
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
+		status = MUSB_ID_GROUND;
+		twl->linkstat = status;
+		ret = musb_mailbox(status);
+		if (ret)
+			twl->linkstat = MUSB_UNKNOWN;
+	} else  {
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
+	}
+	twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
+
+	return IRQ_HANDLED;
+}
+
+static void twl6030_status_work(struct work_struct *work)
+{
+	struct twl6030_usb *twl = container_of(work, struct twl6030_usb,
+					       get_status_work.work);
+
+	twl6030_usb_irq(twl->irq2, twl);
+	twl6030_usbotg_irq(twl->irq1, twl);
+}
+
+static int twl6030_enable_irq(struct twl6030_usb *twl)
+{
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
+	twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
+	twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
+
+	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
+				REG_INT_MSK_LINE_C);
+	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
+				REG_INT_MSK_STS_C);
+
+	return 0;
+}
+
+static void otg_set_vbus_work(struct work_struct *data)
+{
+	struct twl6030_usb *twl = container_of(data, struct twl6030_usb,
+								set_vbus_work);
+
+	/*
+	 * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1
+	 * register. This enables boost mode.
+	 */
+
+	if (twl->vbus_enable)
+		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE, 0x40,
+							CHARGERUSB_CTRL1);
+	else
+		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE, 0x00,
+							CHARGERUSB_CTRL1);
+}
+
+static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled)
+{
+	struct twl6030_usb *twl = comparator_to_twl(comparator);
+
+	twl->vbus_enable = enabled;
+	schedule_work(&twl->set_vbus_work);
+
+	return 0;
+}
+
+static int twl6030_usb_probe(struct platform_device *pdev)
+{
+	u32 ret;
+	struct twl6030_usb	*twl;
+	int			status, err;
+	struct device_node	*np = pdev->dev.of_node;
+	struct device		*dev = &pdev->dev;
+
+	if (!np) {
+		dev_err(dev, "no DT info\n");
+		return -EINVAL;
+	}
+
+	twl = devm_kzalloc(dev, sizeof(*twl), GFP_KERNEL);
+	if (!twl)
+		return -ENOMEM;
+
+	twl->dev		= &pdev->dev;
+	twl->irq1		= platform_get_irq(pdev, 0);
+	twl->irq2		= platform_get_irq(pdev, 1);
+	twl->linkstat		= MUSB_UNKNOWN;
+
+	if (twl->irq1 < 0)
+		return twl->irq1;
+	if (twl->irq2 < 0)
+		return twl->irq2;
+
+	twl->comparator.set_vbus	= twl6030_set_vbus;
+	twl->comparator.start_srp	= twl6030_start_srp;
+
+	ret = omap_usb2_set_comparator(&twl->comparator);
+	if (ret == -ENODEV) {
+		dev_info(&pdev->dev, "phy not ready, deferring probe");
+		return -EPROBE_DEFER;
+	}
+
+	/* init spinlock for workqueue */
+	spin_lock_init(&twl->lock);
+
+	err = twl6030_usb_ldo_init(twl);
+	if (err) {
+		dev_err(&pdev->dev, "ldo init failed\n");
+		return err;
+	}
+
+	platform_set_drvdata(pdev, twl);
+
+	INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);
+	INIT_DELAYED_WORK(&twl->get_status_work, twl6030_status_work);
+
+	status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+			"twl6030_usb", twl);
+	if (status < 0) {
+		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+			twl->irq1, status);
+		goto err_put_regulator;
+	}
+
+	status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+			"twl6030_usb", twl);
+	if (status < 0) {
+		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+			twl->irq2, status);
+		goto err_free_irq1;
+	}
+
+	twl->asleep = 0;
+	twl6030_enable_irq(twl);
+	schedule_delayed_work(&twl->get_status_work, HZ);
+	dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
+
+	return 0;
+
+err_free_irq1:
+	free_irq(twl->irq1, twl);
+err_put_regulator:
+	regulator_put(twl->usb3v3);
+
+	return status;
+}
+
+static int twl6030_usb_remove(struct platform_device *pdev)
+{
+	struct twl6030_usb *twl = platform_get_drvdata(pdev);
+
+	cancel_delayed_work_sync(&twl->get_status_work);
+	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
+		REG_INT_MSK_LINE_C);
+	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
+			REG_INT_MSK_STS_C);
+	free_irq(twl->irq1, twl);
+	free_irq(twl->irq2, twl);
+	regulator_put(twl->usb3v3);
+	cancel_work_sync(&twl->set_vbus_work);
+
+	return 0;
+}
+
+static const struct of_device_id twl6030_usb_id_table[] = {
+	{ .compatible = "ti,twl6030-usb" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, twl6030_usb_id_table);
+
+static struct platform_driver twl6030_usb_driver = {
+	.probe		= twl6030_usb_probe,
+	.remove		= twl6030_usb_remove,
+	.driver		= {
+		.name	= "twl6030_usb",
+		.of_match_table = of_match_ptr(twl6030_usb_id_table),
+		.dev_groups = twl6030_groups,
+	},
+};
+
+static int __init twl6030_usb_init(void)
+{
+	return platform_driver_register(&twl6030_usb_driver);
+}
+subsys_initcall(twl6030_usb_init);
+
+static void __exit twl6030_usb_exit(void)
+{
+	platform_driver_unregister(&twl6030_usb_driver);
+}
+module_exit(twl6030_usb_exit);
+
+MODULE_ALIAS("platform:twl6030_usb");
+MODULE_AUTHOR("Hema HK <hemahk@ti.com>");
+MODULE_DESCRIPTION("TWL6030 USB transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/phy-ulpi-viewport.c b/drivers/usb/phy/phy-ulpi-viewport.c
new file mode 100644
index 000000000..0f61e328e
--- /dev/null
+++ b/drivers/usb/phy/phy-ulpi-viewport.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 Google, Inc.
+ */
+
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#define ULPI_VIEW_WAKEUP	(1 << 31)
+#define ULPI_VIEW_RUN		(1 << 30)
+#define ULPI_VIEW_WRITE		(1 << 29)
+#define ULPI_VIEW_READ		(0 << 29)
+#define ULPI_VIEW_ADDR(x)	(((x) & 0xff) << 16)
+#define ULPI_VIEW_DATA_READ(x)	(((x) >> 8) & 0xff)
+#define ULPI_VIEW_DATA_WRITE(x)	((x) & 0xff)
+
+static int ulpi_viewport_wait(void __iomem *view, u32 mask)
+{
+	u32 val;
+
+	return readl_poll_timeout_atomic(view, val, !(val & mask), 1, 2000);
+}
+
+static int ulpi_viewport_read(struct usb_phy *otg, u32 reg)
+{
+	int ret;
+	void __iomem *view = otg->io_priv;
+
+	writel(ULPI_VIEW_WAKEUP | ULPI_VIEW_WRITE, view);
+	ret = ulpi_viewport_wait(view, ULPI_VIEW_WAKEUP);
+	if (ret)
+		return ret;
+
+	writel(ULPI_VIEW_RUN | ULPI_VIEW_READ | ULPI_VIEW_ADDR(reg), view);
+	ret = ulpi_viewport_wait(view, ULPI_VIEW_RUN);
+	if (ret)
+		return ret;
+
+	return ULPI_VIEW_DATA_READ(readl(view));
+}
+
+static int ulpi_viewport_write(struct usb_phy *otg, u32 val, u32 reg)
+{
+	int ret;
+	void __iomem *view = otg->io_priv;
+
+	writel(ULPI_VIEW_WAKEUP | ULPI_VIEW_WRITE, view);
+	ret = ulpi_viewport_wait(view, ULPI_VIEW_WAKEUP);
+	if (ret)
+		return ret;
+
+	writel(ULPI_VIEW_RUN | ULPI_VIEW_WRITE | ULPI_VIEW_DATA_WRITE(val) |
+						 ULPI_VIEW_ADDR(reg), view);
+
+	return ulpi_viewport_wait(view, ULPI_VIEW_RUN);
+}
+
+struct usb_phy_io_ops ulpi_viewport_access_ops = {
+	.read	= ulpi_viewport_read,
+	.write	= ulpi_viewport_write,
+};
+EXPORT_SYMBOL_GPL(ulpi_viewport_access_ops);
diff --git a/drivers/usb/phy/phy-ulpi.c b/drivers/usb/phy/phy-ulpi.c
new file mode 100644
index 000000000..e683a37e3
--- /dev/null
+++ b/drivers/usb/phy/phy-ulpi.c
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Generic ULPI USB transceiver support
+ *
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on sources from
+ *
+ *   Sascha Hauer <s.hauer@pengutronix.de>
+ *   Freescale Semiconductors
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+
+struct ulpi_info {
+	unsigned int	id;
+	char		*name;
+};
+
+#define ULPI_ID(vendor, product) (((vendor) << 16) | (product))
+#define ULPI_INFO(_id, _name)		\
+	{				\
+		.id	= (_id),	\
+		.name	= (_name),	\
+	}
+
+/* ULPI hardcoded IDs, used for probing */
+static struct ulpi_info ulpi_ids[] = {
+	ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"),
+	ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"),
+	ULPI_INFO(ULPI_ID(0x0424, 0x0007), "SMSC USB3320"),
+	ULPI_INFO(ULPI_ID(0x0424, 0x0009), "SMSC USB334x"),
+	ULPI_INFO(ULPI_ID(0x0451, 0x1507), "TI TUSB1210"),
+};
+
+static int ulpi_set_otg_flags(struct usb_phy *phy)
+{
+	unsigned int flags = ULPI_OTG_CTRL_DP_PULLDOWN |
+			     ULPI_OTG_CTRL_DM_PULLDOWN;
+
+	if (phy->flags & ULPI_OTG_ID_PULLUP)
+		flags |= ULPI_OTG_CTRL_ID_PULLUP;
+
+	/*
+	 * ULPI Specification rev.1.1 default
+	 * for Dp/DmPulldown is enabled.
+	 */
+	if (phy->flags & ULPI_OTG_DP_PULLDOWN_DIS)
+		flags &= ~ULPI_OTG_CTRL_DP_PULLDOWN;
+
+	if (phy->flags & ULPI_OTG_DM_PULLDOWN_DIS)
+		flags &= ~ULPI_OTG_CTRL_DM_PULLDOWN;
+
+	if (phy->flags & ULPI_OTG_EXTVBUSIND)
+		flags |= ULPI_OTG_CTRL_EXTVBUSIND;
+
+	return usb_phy_io_write(phy, flags, ULPI_OTG_CTRL);
+}
+
+static int ulpi_set_fc_flags(struct usb_phy *phy)
+{
+	unsigned int flags = 0;
+
+	/*
+	 * ULPI Specification rev.1.1 default
+	 * for XcvrSelect is Full Speed.
+	 */
+	if (phy->flags & ULPI_FC_HS)
+		flags |= ULPI_FUNC_CTRL_HIGH_SPEED;
+	else if (phy->flags & ULPI_FC_LS)
+		flags |= ULPI_FUNC_CTRL_LOW_SPEED;
+	else if (phy->flags & ULPI_FC_FS4LS)
+		flags |= ULPI_FUNC_CTRL_FS4LS;
+	else
+		flags |= ULPI_FUNC_CTRL_FULL_SPEED;
+
+	if (phy->flags & ULPI_FC_TERMSEL)
+		flags |= ULPI_FUNC_CTRL_TERMSELECT;
+
+	/*
+	 * ULPI Specification rev.1.1 default
+	 * for OpMode is Normal Operation.
+	 */
+	if (phy->flags & ULPI_FC_OP_NODRV)
+		flags |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
+	else if (phy->flags & ULPI_FC_OP_DIS_NRZI)
+		flags |= ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI;
+	else if (phy->flags & ULPI_FC_OP_NSYNC_NEOP)
+		flags |= ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP;
+	else
+		flags |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
+
+	/*
+	 * ULPI Specification rev.1.1 default
+	 * for SuspendM is Powered.
+	 */
+	flags |= ULPI_FUNC_CTRL_SUSPENDM;
+
+	return usb_phy_io_write(phy, flags, ULPI_FUNC_CTRL);
+}
+
+static int ulpi_set_ic_flags(struct usb_phy *phy)
+{
+	unsigned int flags = 0;
+
+	if (phy->flags & ULPI_IC_AUTORESUME)
+		flags |= ULPI_IFC_CTRL_AUTORESUME;
+
+	if (phy->flags & ULPI_IC_EXTVBUS_INDINV)
+		flags |= ULPI_IFC_CTRL_EXTERNAL_VBUS;
+
+	if (phy->flags & ULPI_IC_IND_PASSTHRU)
+		flags |= ULPI_IFC_CTRL_PASSTHRU;
+
+	if (phy->flags & ULPI_IC_PROTECT_DIS)
+		flags |= ULPI_IFC_CTRL_PROTECT_IFC_DISABLE;
+
+	return usb_phy_io_write(phy, flags, ULPI_IFC_CTRL);
+}
+
+static int ulpi_set_flags(struct usb_phy *phy)
+{
+	int ret;
+
+	ret = ulpi_set_otg_flags(phy);
+	if (ret)
+		return ret;
+
+	ret = ulpi_set_ic_flags(phy);
+	if (ret)
+		return ret;
+
+	return ulpi_set_fc_flags(phy);
+}
+
+static int ulpi_check_integrity(struct usb_phy *phy)
+{
+	int ret, i;
+	unsigned int val = 0x55;
+
+	for (i = 0; i < 2; i++) {
+		ret = usb_phy_io_write(phy, val, ULPI_SCRATCH);
+		if (ret < 0)
+			return ret;
+
+		ret = usb_phy_io_read(phy, ULPI_SCRATCH);
+		if (ret < 0)
+			return ret;
+
+		if (ret != val) {
+			pr_err("ULPI integrity check: failed!");
+			return -ENODEV;
+		}
+		val = val << 1;
+	}
+
+	pr_info("ULPI integrity check: passed.\n");
+
+	return 0;
+}
+
+static int ulpi_init(struct usb_phy *phy)
+{
+	int i, vid, pid, ret;
+	u32 ulpi_id = 0;
+
+	for (i = 0; i < 4; i++) {
+		ret = usb_phy_io_read(phy, ULPI_PRODUCT_ID_HIGH - i);
+		if (ret < 0)
+			return ret;
+		ulpi_id = (ulpi_id << 8) | ret;
+	}
+	vid = ulpi_id & 0xffff;
+	pid = ulpi_id >> 16;
+
+	pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid);
+
+	for (i = 0; i < ARRAY_SIZE(ulpi_ids); i++) {
+		if (ulpi_ids[i].id == ULPI_ID(vid, pid)) {
+			pr_info("Found %s ULPI transceiver.\n",
+				ulpi_ids[i].name);
+			break;
+		}
+	}
+
+	ret = ulpi_check_integrity(phy);
+	if (ret)
+		return ret;
+
+	return ulpi_set_flags(phy);
+}
+
+static int ulpi_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	struct usb_phy *phy = otg->usb_phy;
+	unsigned int flags = usb_phy_io_read(phy, ULPI_IFC_CTRL);
+
+	if (!host) {
+		otg->host = NULL;
+		return 0;
+	}
+
+	otg->host = host;
+
+	flags &= ~(ULPI_IFC_CTRL_6_PIN_SERIAL_MODE |
+		   ULPI_IFC_CTRL_3_PIN_SERIAL_MODE |
+		   ULPI_IFC_CTRL_CARKITMODE);
+
+	if (phy->flags & ULPI_IC_6PIN_SERIAL)
+		flags |= ULPI_IFC_CTRL_6_PIN_SERIAL_MODE;
+	else if (phy->flags & ULPI_IC_3PIN_SERIAL)
+		flags |= ULPI_IFC_CTRL_3_PIN_SERIAL_MODE;
+	else if (phy->flags & ULPI_IC_CARKIT)
+		flags |= ULPI_IFC_CTRL_CARKITMODE;
+
+	return usb_phy_io_write(phy, flags, ULPI_IFC_CTRL);
+}
+
+static int ulpi_set_vbus(struct usb_otg *otg, bool on)
+{
+	struct usb_phy *phy = otg->usb_phy;
+	unsigned int flags = usb_phy_io_read(phy, ULPI_OTG_CTRL);
+
+	flags &= ~(ULPI_OTG_CTRL_DRVVBUS | ULPI_OTG_CTRL_DRVVBUS_EXT);
+
+	if (on) {
+		if (phy->flags & ULPI_OTG_DRVVBUS)
+			flags |= ULPI_OTG_CTRL_DRVVBUS;
+
+		if (phy->flags & ULPI_OTG_DRVVBUS_EXT)
+			flags |= ULPI_OTG_CTRL_DRVVBUS_EXT;
+	}
+
+	return usb_phy_io_write(phy, flags, ULPI_OTG_CTRL);
+}
+
+static void otg_ulpi_init(struct usb_phy *phy, struct usb_otg *otg,
+			  struct usb_phy_io_ops *ops,
+			  unsigned int flags)
+{
+	phy->label	= "ULPI";
+	phy->flags	= flags;
+	phy->io_ops	= ops;
+	phy->otg	= otg;
+	phy->init	= ulpi_init;
+
+	otg->usb_phy	= phy;
+	otg->set_host	= ulpi_set_host;
+	otg->set_vbus	= ulpi_set_vbus;
+}
+
+struct usb_phy *
+otg_ulpi_create(struct usb_phy_io_ops *ops,
+		unsigned int flags)
+{
+	struct usb_phy *phy;
+	struct usb_otg *otg;
+
+	phy = kzalloc(sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return NULL;
+
+	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+	if (!otg) {
+		kfree(phy);
+		return NULL;
+	}
+
+	otg_ulpi_init(phy, otg, ops, flags);
+
+	return phy;
+}
+EXPORT_SYMBOL_GPL(otg_ulpi_create);
+
+struct usb_phy *
+devm_otg_ulpi_create(struct device *dev,
+		     struct usb_phy_io_ops *ops,
+		     unsigned int flags)
+{
+	struct usb_phy *phy;
+	struct usb_otg *otg;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return NULL;
+
+	otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL);
+	if (!otg) {
+		devm_kfree(dev, phy);
+		return NULL;
+	}
+
+	otg_ulpi_init(phy, otg, ops, flags);
+
+	return phy;
+}
+EXPORT_SYMBOL_GPL(devm_otg_ulpi_create);
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
new file mode 100644
index 000000000..1b24492bb
--- /dev/null
+++ b/drivers/usb/phy/phy.c
@@ -0,0 +1,770 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * phy.c -- USB phy handling
+ *
+ * Copyright (C) 2004-2013 Texas Instruments
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include <linux/usb/phy.h>
+
+/* Default current range by charger type. */
+#define DEFAULT_SDP_CUR_MIN	2
+#define DEFAULT_SDP_CUR_MAX	500
+#define DEFAULT_SDP_CUR_MIN_SS	150
+#define DEFAULT_SDP_CUR_MAX_SS	900
+#define DEFAULT_DCP_CUR_MIN	500
+#define DEFAULT_DCP_CUR_MAX	5000
+#define DEFAULT_CDP_CUR_MIN	1500
+#define DEFAULT_CDP_CUR_MAX	5000
+#define DEFAULT_ACA_CUR_MIN	1500
+#define DEFAULT_ACA_CUR_MAX	5000
+
+static LIST_HEAD(phy_list);
+static DEFINE_SPINLOCK(phy_lock);
+
+struct phy_devm {
+	struct usb_phy *phy;
+	struct notifier_block *nb;
+};
+
+static const char *const usb_chger_type[] = {
+	[UNKNOWN_TYPE]			= "USB_CHARGER_UNKNOWN_TYPE",
+	[SDP_TYPE]			= "USB_CHARGER_SDP_TYPE",
+	[CDP_TYPE]			= "USB_CHARGER_CDP_TYPE",
+	[DCP_TYPE]			= "USB_CHARGER_DCP_TYPE",
+	[ACA_TYPE]			= "USB_CHARGER_ACA_TYPE",
+};
+
+static const char *const usb_chger_state[] = {
+	[USB_CHARGER_DEFAULT]	= "USB_CHARGER_DEFAULT",
+	[USB_CHARGER_PRESENT]	= "USB_CHARGER_PRESENT",
+	[USB_CHARGER_ABSENT]	= "USB_CHARGER_ABSENT",
+};
+
+static struct usb_phy *__usb_find_phy(struct list_head *list,
+	enum usb_phy_type type)
+{
+	struct usb_phy  *phy = NULL;
+
+	list_for_each_entry(phy, list, head) {
+		if (phy->type != type)
+			continue;
+
+		return phy;
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+static struct usb_phy *__of_usb_find_phy(struct device_node *node)
+{
+	struct usb_phy  *phy;
+
+	if (!of_device_is_available(node))
+		return ERR_PTR(-ENODEV);
+
+	list_for_each_entry(phy, &phy_list, head) {
+		if (node != phy->dev->of_node)
+			continue;
+
+		return phy;
+	}
+
+	return ERR_PTR(-EPROBE_DEFER);
+}
+
+static struct usb_phy *__device_to_usb_phy(struct device *dev)
+{
+	struct usb_phy *usb_phy;
+
+	list_for_each_entry(usb_phy, &phy_list, head) {
+		if (usb_phy->dev == dev)
+			return usb_phy;
+	}
+
+	return NULL;
+}
+
+static void usb_phy_set_default_current(struct usb_phy *usb_phy)
+{
+	usb_phy->chg_cur.sdp_min = DEFAULT_SDP_CUR_MIN;
+	usb_phy->chg_cur.sdp_max = DEFAULT_SDP_CUR_MAX;
+	usb_phy->chg_cur.dcp_min = DEFAULT_DCP_CUR_MIN;
+	usb_phy->chg_cur.dcp_max = DEFAULT_DCP_CUR_MAX;
+	usb_phy->chg_cur.cdp_min = DEFAULT_CDP_CUR_MIN;
+	usb_phy->chg_cur.cdp_max = DEFAULT_CDP_CUR_MAX;
+	usb_phy->chg_cur.aca_min = DEFAULT_ACA_CUR_MIN;
+	usb_phy->chg_cur.aca_max = DEFAULT_ACA_CUR_MAX;
+}
+
+/**
+ * usb_phy_notify_charger_work - notify the USB charger state
+ * @work: the charger work to notify the USB charger state
+ *
+ * This work can be issued when USB charger state has been changed or
+ * USB charger current has been changed, then we can notify the current
+ * what can be drawn to power user and the charger state to userspace.
+ *
+ * If we get the charger type from extcon subsystem, we can notify the
+ * charger state to power user automatically by usb_phy_get_charger_type()
+ * issuing from extcon subsystem.
+ *
+ * If we get the charger type from ->charger_detect() instead of extcon
+ * subsystem, the usb phy driver should issue usb_phy_set_charger_state()
+ * to set charger state when the charger state has been changed.
+ */
+static void usb_phy_notify_charger_work(struct work_struct *work)
+{
+	struct usb_phy *usb_phy = container_of(work, struct usb_phy, chg_work);
+	unsigned int min, max;
+
+	switch (usb_phy->chg_state) {
+	case USB_CHARGER_PRESENT:
+		usb_phy_get_charger_current(usb_phy, &min, &max);
+
+		atomic_notifier_call_chain(&usb_phy->notifier, max, usb_phy);
+		break;
+	case USB_CHARGER_ABSENT:
+		usb_phy_set_default_current(usb_phy);
+
+		atomic_notifier_call_chain(&usb_phy->notifier, 0, usb_phy);
+		break;
+	default:
+		dev_warn(usb_phy->dev, "Unknown USB charger state: %d\n",
+			 usb_phy->chg_state);
+		return;
+	}
+
+	kobject_uevent(&usb_phy->dev->kobj, KOBJ_CHANGE);
+}
+
+static int usb_phy_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct usb_phy *usb_phy;
+	char uchger_state[50] = { 0 };
+	char uchger_type[50] = { 0 };
+	unsigned long flags;
+
+	spin_lock_irqsave(&phy_lock, flags);
+	usb_phy = __device_to_usb_phy(dev);
+	spin_unlock_irqrestore(&phy_lock, flags);
+
+	if (!usb_phy)
+		return -ENODEV;
+
+	snprintf(uchger_state, ARRAY_SIZE(uchger_state),
+		 "USB_CHARGER_STATE=%s", usb_chger_state[usb_phy->chg_state]);
+
+	snprintf(uchger_type, ARRAY_SIZE(uchger_type),
+		 "USB_CHARGER_TYPE=%s", usb_chger_type[usb_phy->chg_type]);
+
+	if (add_uevent_var(env, uchger_state))
+		return -ENOMEM;
+
+	if (add_uevent_var(env, uchger_type))
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void __usb_phy_get_charger_type(struct usb_phy *usb_phy)
+{
+	if (extcon_get_state(usb_phy->edev, EXTCON_CHG_USB_SDP) > 0) {
+		usb_phy->chg_type = SDP_TYPE;
+		usb_phy->chg_state = USB_CHARGER_PRESENT;
+	} else if (extcon_get_state(usb_phy->edev, EXTCON_CHG_USB_CDP) > 0) {
+		usb_phy->chg_type = CDP_TYPE;
+		usb_phy->chg_state = USB_CHARGER_PRESENT;
+	} else if (extcon_get_state(usb_phy->edev, EXTCON_CHG_USB_DCP) > 0) {
+		usb_phy->chg_type = DCP_TYPE;
+		usb_phy->chg_state = USB_CHARGER_PRESENT;
+	} else if (extcon_get_state(usb_phy->edev, EXTCON_CHG_USB_ACA) > 0) {
+		usb_phy->chg_type = ACA_TYPE;
+		usb_phy->chg_state = USB_CHARGER_PRESENT;
+	} else {
+		usb_phy->chg_type = UNKNOWN_TYPE;
+		usb_phy->chg_state = USB_CHARGER_ABSENT;
+	}
+
+	schedule_work(&usb_phy->chg_work);
+}
+
+/**
+ * usb_phy_get_charger_type - get charger type from extcon subsystem
+ * @nb: the notifier block to determine charger type
+ * @state: the cable state
+ * @data: private data
+ *
+ * Determin the charger type from extcon subsystem which also means the
+ * charger state has been chaned, then we should notify this event.
+ */
+static int usb_phy_get_charger_type(struct notifier_block *nb,
+				    unsigned long state, void *data)
+{
+	struct usb_phy *usb_phy = container_of(nb, struct usb_phy, type_nb);
+
+	__usb_phy_get_charger_type(usb_phy);
+	return NOTIFY_OK;
+}
+
+/**
+ * usb_phy_set_charger_current - set the USB charger current
+ * @usb_phy: the USB phy to be used
+ * @mA: the current need to be set
+ *
+ * Usually we only change the charger default current when USB finished the
+ * enumeration as one SDP charger. As one SDP charger, usb_phy_set_power()
+ * will issue this function to change charger current when after setting USB
+ * configuration, or suspend/resume USB. For other type charger, we should
+ * use the default charger current and we do not suggest to issue this function
+ * to change the charger current.
+ *
+ * When USB charger current has been changed, we need to notify the power users.
+ */
+void usb_phy_set_charger_current(struct usb_phy *usb_phy, unsigned int mA)
+{
+	switch (usb_phy->chg_type) {
+	case SDP_TYPE:
+		if (usb_phy->chg_cur.sdp_max == mA)
+			return;
+
+		usb_phy->chg_cur.sdp_max = (mA > DEFAULT_SDP_CUR_MAX_SS) ?
+			DEFAULT_SDP_CUR_MAX_SS : mA;
+		break;
+	case DCP_TYPE:
+		if (usb_phy->chg_cur.dcp_max == mA)
+			return;
+
+		usb_phy->chg_cur.dcp_max = (mA > DEFAULT_DCP_CUR_MAX) ?
+			DEFAULT_DCP_CUR_MAX : mA;
+		break;
+	case CDP_TYPE:
+		if (usb_phy->chg_cur.cdp_max == mA)
+			return;
+
+		usb_phy->chg_cur.cdp_max = (mA > DEFAULT_CDP_CUR_MAX) ?
+			DEFAULT_CDP_CUR_MAX : mA;
+		break;
+	case ACA_TYPE:
+		if (usb_phy->chg_cur.aca_max == mA)
+			return;
+
+		usb_phy->chg_cur.aca_max = (mA > DEFAULT_ACA_CUR_MAX) ?
+			DEFAULT_ACA_CUR_MAX : mA;
+		break;
+	default:
+		return;
+	}
+
+	schedule_work(&usb_phy->chg_work);
+}
+EXPORT_SYMBOL_GPL(usb_phy_set_charger_current);
+
+/**
+ * usb_phy_get_charger_current - get the USB charger current
+ * @usb_phy: the USB phy to be used
+ * @min: the minimum current
+ * @max: the maximum current
+ *
+ * Usually we will notify the maximum current to power user, but for some
+ * special case, power user also need the minimum current value. Then the
+ * power user can issue this function to get the suitable current.
+ */
+void usb_phy_get_charger_current(struct usb_phy *usb_phy,
+				 unsigned int *min, unsigned int *max)
+{
+	switch (usb_phy->chg_type) {
+	case SDP_TYPE:
+		*min = usb_phy->chg_cur.sdp_min;
+		*max = usb_phy->chg_cur.sdp_max;
+		break;
+	case DCP_TYPE:
+		*min = usb_phy->chg_cur.dcp_min;
+		*max = usb_phy->chg_cur.dcp_max;
+		break;
+	case CDP_TYPE:
+		*min = usb_phy->chg_cur.cdp_min;
+		*max = usb_phy->chg_cur.cdp_max;
+		break;
+	case ACA_TYPE:
+		*min = usb_phy->chg_cur.aca_min;
+		*max = usb_phy->chg_cur.aca_max;
+		break;
+	default:
+		*min = 0;
+		*max = 0;
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(usb_phy_get_charger_current);
+
+/**
+ * usb_phy_set_charger_state - set the USB charger state
+ * @usb_phy: the USB phy to be used
+ * @state: the new state need to be set for charger
+ *
+ * The usb phy driver can issue this function when the usb phy driver
+ * detected the charger state has been changed, in this case the charger
+ * type should be get from ->charger_detect().
+ */
+void usb_phy_set_charger_state(struct usb_phy *usb_phy,
+			       enum usb_charger_state state)
+{
+	if (usb_phy->chg_state == state || !usb_phy->charger_detect)
+		return;
+
+	usb_phy->chg_state = state;
+	if (usb_phy->chg_state == USB_CHARGER_PRESENT)
+		usb_phy->chg_type = usb_phy->charger_detect(usb_phy);
+	else
+		usb_phy->chg_type = UNKNOWN_TYPE;
+
+	schedule_work(&usb_phy->chg_work);
+}
+EXPORT_SYMBOL_GPL(usb_phy_set_charger_state);
+
+static void devm_usb_phy_release(struct device *dev, void *res)
+{
+	struct usb_phy *phy = *(struct usb_phy **)res;
+
+	usb_put_phy(phy);
+}
+
+static void devm_usb_phy_release2(struct device *dev, void *_res)
+{
+	struct phy_devm *res = _res;
+
+	if (res->nb)
+		usb_unregister_notifier(res->phy, res->nb);
+	usb_put_phy(res->phy);
+}
+
+static int devm_usb_phy_match(struct device *dev, void *res, void *match_data)
+{
+	struct usb_phy **phy = res;
+
+	return *phy == match_data;
+}
+
+static void usb_charger_init(struct usb_phy *usb_phy)
+{
+	usb_phy->chg_type = UNKNOWN_TYPE;
+	usb_phy->chg_state = USB_CHARGER_DEFAULT;
+	usb_phy_set_default_current(usb_phy);
+	INIT_WORK(&usb_phy->chg_work, usb_phy_notify_charger_work);
+}
+
+static int usb_add_extcon(struct usb_phy *x)
+{
+	int ret;
+
+	if (of_property_read_bool(x->dev->of_node, "extcon")) {
+		x->edev = extcon_get_edev_by_phandle(x->dev, 0);
+		if (IS_ERR(x->edev))
+			return PTR_ERR(x->edev);
+
+		x->id_edev = extcon_get_edev_by_phandle(x->dev, 1);
+		if (IS_ERR(x->id_edev)) {
+			x->id_edev = NULL;
+			dev_info(x->dev, "No separate ID extcon device\n");
+		}
+
+		if (x->vbus_nb.notifier_call) {
+			ret = devm_extcon_register_notifier(x->dev, x->edev,
+							    EXTCON_USB,
+							    &x->vbus_nb);
+			if (ret < 0) {
+				dev_err(x->dev,
+					"register VBUS notifier failed\n");
+				return ret;
+			}
+		} else {
+			x->type_nb.notifier_call = usb_phy_get_charger_type;
+
+			ret = devm_extcon_register_notifier(x->dev, x->edev,
+							    EXTCON_CHG_USB_SDP,
+							    &x->type_nb);
+			if (ret) {
+				dev_err(x->dev,
+					"register extcon USB SDP failed.\n");
+				return ret;
+			}
+
+			ret = devm_extcon_register_notifier(x->dev, x->edev,
+							    EXTCON_CHG_USB_CDP,
+							    &x->type_nb);
+			if (ret) {
+				dev_err(x->dev,
+					"register extcon USB CDP failed.\n");
+				return ret;
+			}
+
+			ret = devm_extcon_register_notifier(x->dev, x->edev,
+							    EXTCON_CHG_USB_DCP,
+							    &x->type_nb);
+			if (ret) {
+				dev_err(x->dev,
+					"register extcon USB DCP failed.\n");
+				return ret;
+			}
+
+			ret = devm_extcon_register_notifier(x->dev, x->edev,
+							    EXTCON_CHG_USB_ACA,
+							    &x->type_nb);
+			if (ret) {
+				dev_err(x->dev,
+					"register extcon USB ACA failed.\n");
+				return ret;
+			}
+		}
+
+		if (x->id_nb.notifier_call) {
+			struct extcon_dev *id_ext;
+
+			if (x->id_edev)
+				id_ext = x->id_edev;
+			else
+				id_ext = x->edev;
+
+			ret = devm_extcon_register_notifier(x->dev, id_ext,
+							    EXTCON_USB_HOST,
+							    &x->id_nb);
+			if (ret < 0) {
+				dev_err(x->dev,
+					"register ID notifier failed\n");
+				return ret;
+			}
+		}
+	}
+
+	if (x->type_nb.notifier_call)
+		__usb_phy_get_charger_type(x);
+
+	return 0;
+}
+
+/**
+ * devm_usb_get_phy - find the USB PHY
+ * @dev: device that requests this phy
+ * @type: the type of the phy the controller requires
+ *
+ * Gets the phy using usb_get_phy(), and associates a device with it using
+ * devres. On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type)
+{
+	struct usb_phy **ptr, *phy;
+
+	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	phy = usb_get_phy(type);
+	if (!IS_ERR(phy)) {
+		*ptr = phy;
+		devres_add(dev, ptr);
+	} else
+		devres_free(ptr);
+
+	return phy;
+}
+EXPORT_SYMBOL_GPL(devm_usb_get_phy);
+
+/**
+ * usb_get_phy - find the USB PHY
+ * @type: the type of the phy the controller requires
+ *
+ * Returns the phy driver, after getting a refcount to it; or
+ * -ENODEV if there is no such phy.  The caller is responsible for
+ * calling usb_put_phy() to release that count.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *usb_get_phy(enum usb_phy_type type)
+{
+	struct usb_phy	*phy = NULL;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&phy_lock, flags);
+
+	phy = __usb_find_phy(&phy_list, type);
+	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
+		pr_debug("PHY: unable to find transceiver of type %s\n",
+			usb_phy_type_string(type));
+		if (!IS_ERR(phy))
+			phy = ERR_PTR(-ENODEV);
+
+		goto err0;
+	}
+
+	get_device(phy->dev);
+
+err0:
+	spin_unlock_irqrestore(&phy_lock, flags);
+
+	return phy;
+}
+EXPORT_SYMBOL_GPL(usb_get_phy);
+
+/**
+ * devm_usb_get_phy_by_node - find the USB PHY by device_node
+ * @dev: device that requests this phy
+ * @node: the device_node for the phy device.
+ * @nb: a notifier_block to register with the phy.
+ *
+ * Returns the phy driver associated with the given device_node,
+ * after getting a refcount to it, -ENODEV if there is no such phy or
+ * -EPROBE_DEFER if the device is not yet loaded. While at that, it
+ * also associates the device with
+ * the phy using devres. On driver detach, release function is invoked
+ * on the devres data, then, devres data is freed.
+ *
+ * For use by peripheral drivers for devices related to a phy,
+ * such as a charger.
+ */
+struct  usb_phy *devm_usb_get_phy_by_node(struct device *dev,
+					  struct device_node *node,
+					  struct notifier_block *nb)
+{
+	struct usb_phy	*phy = ERR_PTR(-ENOMEM);
+	struct phy_devm	*ptr;
+	unsigned long	flags;
+
+	ptr = devres_alloc(devm_usb_phy_release2, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr) {
+		dev_dbg(dev, "failed to allocate memory for devres\n");
+		goto err0;
+	}
+
+	spin_lock_irqsave(&phy_lock, flags);
+
+	phy = __of_usb_find_phy(node);
+	if (IS_ERR(phy)) {
+		devres_free(ptr);
+		goto err1;
+	}
+
+	if (!try_module_get(phy->dev->driver->owner)) {
+		phy = ERR_PTR(-ENODEV);
+		devres_free(ptr);
+		goto err1;
+	}
+	if (nb)
+		usb_register_notifier(phy, nb);
+	ptr->phy = phy;
+	ptr->nb = nb;
+	devres_add(dev, ptr);
+
+	get_device(phy->dev);
+
+err1:
+	spin_unlock_irqrestore(&phy_lock, flags);
+
+err0:
+
+	return phy;
+}
+EXPORT_SYMBOL_GPL(devm_usb_get_phy_by_node);
+
+/**
+ * devm_usb_get_phy_by_phandle - find the USB PHY by phandle
+ * @dev: device that requests this phy
+ * @phandle: name of the property holding the phy phandle value
+ * @index: the index of the phy
+ *
+ * Returns the phy driver associated with the given phandle value,
+ * after getting a refcount to it, -ENODEV if there is no such phy or
+ * -EPROBE_DEFER if there is a phandle to the phy, but the device is
+ * not yet loaded. While at that, it also associates the device with
+ * the phy using devres. On driver detach, release function is invoked
+ * on the devres data, then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev,
+	const char *phandle, u8 index)
+{
+	struct device_node *node;
+	struct usb_phy	*phy;
+
+	if (!dev->of_node) {
+		dev_dbg(dev, "device does not have a device node entry\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	node = of_parse_phandle(dev->of_node, phandle, index);
+	if (!node) {
+		dev_dbg(dev, "failed to get %s phandle in %pOF node\n", phandle,
+			dev->of_node);
+		return ERR_PTR(-ENODEV);
+	}
+	phy = devm_usb_get_phy_by_node(dev, node, NULL);
+	of_node_put(node);
+	return phy;
+}
+EXPORT_SYMBOL_GPL(devm_usb_get_phy_by_phandle);
+
+/**
+ * devm_usb_put_phy - release the USB PHY
+ * @dev: device that wants to release this phy
+ * @phy: the phy returned by devm_usb_get_phy()
+ *
+ * destroys the devres associated with this phy and invokes usb_put_phy
+ * to release the phy.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+void devm_usb_put_phy(struct device *dev, struct usb_phy *phy)
+{
+	int r;
+
+	r = devres_destroy(dev, devm_usb_phy_release, devm_usb_phy_match, phy);
+	dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
+}
+EXPORT_SYMBOL_GPL(devm_usb_put_phy);
+
+/**
+ * usb_put_phy - release the USB PHY
+ * @x: the phy returned by usb_get_phy()
+ *
+ * Releases a refcount the caller received from usb_get_phy().
+ *
+ * For use by USB host and peripheral drivers.
+ */
+void usb_put_phy(struct usb_phy *x)
+{
+	if (x) {
+		struct module *owner = x->dev->driver->owner;
+
+		put_device(x->dev);
+		module_put(owner);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_put_phy);
+
+/**
+ * usb_add_phy: declare the USB PHY
+ * @x: the USB phy to be used; or NULL
+ * @type: the type of this PHY
+ *
+ * This call is exclusively for use by phy drivers, which
+ * coordinate the activities of drivers for host and peripheral
+ * controllers, and in some cases for VBUS current regulation.
+ */
+int usb_add_phy(struct usb_phy *x, enum usb_phy_type type)
+{
+	int		ret = 0;
+	unsigned long	flags;
+	struct usb_phy	*phy;
+
+	if (x->type != USB_PHY_TYPE_UNDEFINED) {
+		dev_err(x->dev, "not accepting initialized PHY %s\n", x->label);
+		return -EINVAL;
+	}
+
+	usb_charger_init(x);
+	ret = usb_add_extcon(x);
+	if (ret)
+		return ret;
+
+	ATOMIC_INIT_NOTIFIER_HEAD(&x->notifier);
+
+	spin_lock_irqsave(&phy_lock, flags);
+
+	list_for_each_entry(phy, &phy_list, head) {
+		if (phy->type == type) {
+			ret = -EBUSY;
+			dev_err(x->dev, "transceiver type %s already exists\n",
+						usb_phy_type_string(type));
+			goto out;
+		}
+	}
+
+	x->type = type;
+	list_add_tail(&x->head, &phy_list);
+
+out:
+	spin_unlock_irqrestore(&phy_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_add_phy);
+
+static struct device_type usb_phy_dev_type = {
+	.name = "usb_phy",
+	.uevent = usb_phy_uevent,
+};
+
+/**
+ * usb_add_phy_dev - declare the USB PHY
+ * @x: the USB phy to be used; or NULL
+ *
+ * This call is exclusively for use by phy drivers, which
+ * coordinate the activities of drivers for host and peripheral
+ * controllers, and in some cases for VBUS current regulation.
+ */
+int usb_add_phy_dev(struct usb_phy *x)
+{
+	unsigned long flags;
+	int ret;
+
+	if (!x->dev) {
+		dev_err(x->dev, "no device provided for PHY\n");
+		return -EINVAL;
+	}
+
+	usb_charger_init(x);
+	ret = usb_add_extcon(x);
+	if (ret)
+		return ret;
+
+	x->dev->type = &usb_phy_dev_type;
+
+	ATOMIC_INIT_NOTIFIER_HEAD(&x->notifier);
+
+	spin_lock_irqsave(&phy_lock, flags);
+	list_add_tail(&x->head, &phy_list);
+	spin_unlock_irqrestore(&phy_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_add_phy_dev);
+
+/**
+ * usb_remove_phy - remove the OTG PHY
+ * @x: the USB OTG PHY to be removed;
+ *
+ * This reverts the effects of usb_add_phy
+ */
+void usb_remove_phy(struct usb_phy *x)
+{
+	unsigned long	flags;
+
+	spin_lock_irqsave(&phy_lock, flags);
+	if (x)
+		list_del(&x->head);
+	spin_unlock_irqrestore(&phy_lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_remove_phy);
+
+/**
+ * usb_phy_set_event - set event to phy event
+ * @x: the phy returned by usb_get_phy();
+ * @event: event to set
+ *
+ * This sets event to phy event
+ */
+void usb_phy_set_event(struct usb_phy *x, unsigned long event)
+{
+	x->last_event = event;
+}
+EXPORT_SYMBOL_GPL(usb_phy_set_event);
diff --git a/drivers/usb/renesas_usbhs/Kconfig b/drivers/usb/renesas_usbhs/Kconfig
new file mode 100644
index 000000000..d6b3fef3e
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Renesas USBHS Controller Drivers
+#
+
+config USB_RENESAS_USBHS
+	tristate 'Renesas USBHS controller'
+	depends on USB_GADGET
+	depends on ARCH_RENESAS || SUPERH || COMPILE_TEST
+	depends on EXTCON || !EXTCON # if EXTCON=m, USBHS cannot be built-in
+	help
+	  Renesas USBHS is a discrete USB host and peripheral controller chip
+	  that supports both full and high speed USB 2.0 data transfers.
+	  It has nine or more configurable endpoints, and endpoint zero.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "renesas_usbhs"
diff --git a/drivers/usb/renesas_usbhs/Makefile b/drivers/usb/renesas_usbhs/Makefile
new file mode 100644
index 000000000..a1fed56b0
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# for Renesas USB
+#
+
+obj-$(CONFIG_USB_RENESAS_USBHS)	+= renesas_usbhs.o
+
+renesas_usbhs-y			:= common.o mod.o pipe.o fifo.o rcar2.o rcar3.o rza.o rza2.o
+
+ifneq ($(CONFIG_USB_RENESAS_USBHS_HCD),)
+	renesas_usbhs-y		+= mod_host.o
+endif
+
+ifneq ($(CONFIG_USB_RENESAS_USBHS_UDC),)
+	renesas_usbhs-y		+= mod_gadget.o
+endif
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
new file mode 100644
index 000000000..96f3939a6
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -0,0 +1,836 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2019 Renesas Electronics Corporation
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include "common.h"
+#include "rcar2.h"
+#include "rcar3.h"
+#include "rza.h"
+
+/*
+ *		image of renesas_usbhs
+ *
+ * ex) gadget case
+
+ * mod.c
+ * mod_gadget.c
+ * mod_host.c		pipe.c		fifo.c
+ *
+ *			+-------+	+-----------+
+ *			| pipe0 |------>| fifo pio  |
+ * +------------+	+-------+	+-----------+
+ * | mod_gadget |=====> | pipe1 |--+
+ * +------------+	+-------+  |	+-----------+
+ *			| pipe2 |  |  +-| fifo dma0 |
+ * +------------+	+-------+  |  |	+-----------+
+ * | mod_host   |	| pipe3 |<-|--+
+ * +------------+	+-------+  |	+-----------+
+ *			| ....  |  +--->| fifo dma1 |
+ *			| ....  |	+-----------+
+ */
+
+/*
+ * platform call back
+ *
+ * renesas usb support platform callback function.
+ * Below macro call it.
+ * if platform doesn't have callback, it return 0 (no error)
+ */
+#define usbhs_platform_call(priv, func, args...)\
+	(!(priv) ? -ENODEV :			\
+	 !((priv)->pfunc->func) ? 0 :		\
+	 (priv)->pfunc->func(args))
+
+/*
+ *		common functions
+ */
+u16 usbhs_read(struct usbhs_priv *priv, u32 reg)
+{
+	return ioread16(priv->base + reg);
+}
+
+void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data)
+{
+	iowrite16(data, priv->base + reg);
+}
+
+void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data)
+{
+	u16 val = usbhs_read(priv, reg);
+
+	val &= ~mask;
+	val |= data & mask;
+
+	usbhs_write(priv, reg, val);
+}
+
+struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev)
+{
+	return dev_get_drvdata(&pdev->dev);
+}
+
+int usbhs_get_id_as_gadget(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+/*
+ *		syscfg functions
+ */
+static void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable)
+{
+	usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0);
+}
+
+void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable)
+{
+	u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
+	u16 val  = DCFM | DRPD | HSE | USBE;
+
+	/*
+	 * if enable
+	 *
+	 * - select Host mode
+	 * - D+ Line/D- Line Pull-down
+	 */
+	usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
+}
+
+void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable)
+{
+	u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
+	u16 val  = HSE | USBE;
+
+	/* CNEN bit is required for function operation */
+	if (usbhs_get_dparam(priv, has_cnen)) {
+		mask |= CNEN;
+		val  |= CNEN;
+	}
+
+	/*
+	 * if enable
+	 *
+	 * - select Function mode
+	 * - D+ Line Pull-up is disabled
+	 *      When D+ Line Pull-up is enabled,
+	 *      calling usbhs_sys_function_pullup(,1)
+	 */
+	usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
+}
+
+void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable)
+{
+	usbhs_bset(priv, SYSCFG, DPRPU, enable ? DPRPU : 0);
+}
+
+void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode)
+{
+	usbhs_write(priv, TESTMODE, mode);
+}
+
+/*
+ *		frame functions
+ */
+int usbhs_frame_get_num(struct usbhs_priv *priv)
+{
+	return usbhs_read(priv, FRMNUM) & FRNM_MASK;
+}
+
+/*
+ *		usb request functions
+ */
+void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
+{
+	u16 val;
+
+	val = usbhs_read(priv, USBREQ);
+	req->bRequest		= (val >> 8) & 0xFF;
+	req->bRequestType	= (val >> 0) & 0xFF;
+
+	req->wValue	= cpu_to_le16(usbhs_read(priv, USBVAL));
+	req->wIndex	= cpu_to_le16(usbhs_read(priv, USBINDX));
+	req->wLength	= cpu_to_le16(usbhs_read(priv, USBLENG));
+}
+
+void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
+{
+	usbhs_write(priv, USBREQ,  (req->bRequest << 8) | req->bRequestType);
+	usbhs_write(priv, USBVAL,  le16_to_cpu(req->wValue));
+	usbhs_write(priv, USBINDX, le16_to_cpu(req->wIndex));
+	usbhs_write(priv, USBLENG, le16_to_cpu(req->wLength));
+
+	usbhs_bset(priv, DCPCTR, SUREQ, SUREQ);
+}
+
+/*
+ *		bus/vbus functions
+ */
+void usbhs_bus_send_sof_enable(struct usbhs_priv *priv)
+{
+	u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT);
+
+	if (status != USBRST) {
+		struct device *dev = usbhs_priv_to_dev(priv);
+		dev_err(dev, "usbhs should be reset\n");
+	}
+
+	usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT);
+}
+
+void usbhs_bus_send_reset(struct usbhs_priv *priv)
+{
+	usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST);
+}
+
+int usbhs_bus_get_speed(struct usbhs_priv *priv)
+{
+	u16 dvstctr = usbhs_read(priv, DVSTCTR);
+
+	switch (RHST & dvstctr) {
+	case RHST_LOW_SPEED:
+		return USB_SPEED_LOW;
+	case RHST_FULL_SPEED:
+		return USB_SPEED_FULL;
+	case RHST_HIGH_SPEED:
+		return USB_SPEED_HIGH;
+	}
+
+	return USB_SPEED_UNKNOWN;
+}
+
+int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable)
+{
+	struct platform_device *pdev = usbhs_priv_to_pdev(priv);
+
+	return usbhs_platform_call(priv, set_vbus, pdev, enable);
+}
+
+static void usbhsc_bus_init(struct usbhs_priv *priv)
+{
+	usbhs_write(priv, DVSTCTR, 0);
+
+	usbhs_vbus_ctrl(priv, 0);
+}
+
+/*
+ *		device configuration
+ */
+int usbhs_set_device_config(struct usbhs_priv *priv, int devnum,
+			   u16 upphub, u16 hubport, u16 speed)
+{
+	struct device *dev = usbhs_priv_to_dev(priv);
+	u16 usbspd = 0;
+	u32 reg = DEVADD0 + (2 * devnum);
+
+	if (devnum > 10) {
+		dev_err(dev, "cannot set speed to unknown device %d\n", devnum);
+		return -EIO;
+	}
+
+	if (upphub > 0xA) {
+		dev_err(dev, "unsupported hub number %d\n", upphub);
+		return -EIO;
+	}
+
+	switch (speed) {
+	case USB_SPEED_LOW:
+		usbspd = USBSPD_SPEED_LOW;
+		break;
+	case USB_SPEED_FULL:
+		usbspd = USBSPD_SPEED_FULL;
+		break;
+	case USB_SPEED_HIGH:
+		usbspd = USBSPD_SPEED_HIGH;
+		break;
+	default:
+		dev_err(dev, "unsupported speed %d\n", speed);
+		return -EIO;
+	}
+
+	usbhs_write(priv, reg,	UPPHUB(upphub)	|
+				HUBPORT(hubport)|
+				USBSPD(usbspd));
+
+	return 0;
+}
+
+/*
+ *		interrupt functions
+ */
+void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit)
+{
+	u16 pipe_mask = (u16)GENMASK(usbhs_get_dparam(priv, pipe_size), 0);
+
+	usbhs_write(priv, sts_reg, ~(1 << bit) & pipe_mask);
+}
+
+/*
+ *		local functions
+ */
+static void usbhsc_set_buswait(struct usbhs_priv *priv)
+{
+	int wait = usbhs_get_dparam(priv, buswait_bwait);
+
+	/* set bus wait if platform have */
+	if (wait)
+		usbhs_bset(priv, BUSWAIT, 0x000F, wait);
+}
+
+static bool usbhsc_is_multi_clks(struct usbhs_priv *priv)
+{
+	return priv->dparam.multi_clks;
+}
+
+static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv)
+{
+	if (!usbhsc_is_multi_clks(priv))
+		return 0;
+
+	/* The first clock should exist */
+	priv->clks[0] = of_clk_get(dev_of_node(dev), 0);
+	if (IS_ERR(priv->clks[0]))
+		return PTR_ERR(priv->clks[0]);
+
+	/*
+	 * To backward compatibility with old DT, this driver checks the return
+	 * value if it's -ENOENT or not.
+	 */
+	priv->clks[1] = of_clk_get(dev_of_node(dev), 1);
+	if (PTR_ERR(priv->clks[1]) == -ENOENT)
+		priv->clks[1] = NULL;
+	else if (IS_ERR(priv->clks[1]))
+		return PTR_ERR(priv->clks[1]);
+
+	return 0;
+}
+
+static void usbhsc_clk_put(struct usbhs_priv *priv)
+{
+	int i;
+
+	if (!usbhsc_is_multi_clks(priv))
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(priv->clks); i++)
+		clk_put(priv->clks[i]);
+}
+
+static int usbhsc_clk_prepare_enable(struct usbhs_priv *priv)
+{
+	int i, ret;
+
+	if (!usbhsc_is_multi_clks(priv))
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(priv->clks); i++) {
+		ret = clk_prepare_enable(priv->clks[i]);
+		if (ret) {
+			while (--i >= 0)
+				clk_disable_unprepare(priv->clks[i]);
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+static void usbhsc_clk_disable_unprepare(struct usbhs_priv *priv)
+{
+	int i;
+
+	if (!usbhsc_is_multi_clks(priv))
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(priv->clks); i++)
+		clk_disable_unprepare(priv->clks[i]);
+}
+
+/*
+ *		platform default param
+ */
+
+/* commonly used on old SH-Mobile SoCs */
+static struct renesas_usbhs_driver_pipe_config usbhsc_default_pipe[] = {
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x18, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x28, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x38, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x07, false),
+};
+
+/* commonly used on newer SH-Mobile and R-Car SoCs */
+static struct renesas_usbhs_driver_pipe_config usbhsc_new_pipe[] = {
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x28, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x58, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x68, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x78, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x88, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x98, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xa8, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xb8, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xc8, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xd8, true),
+};
+
+/*
+ *		power control
+ */
+static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable)
+{
+	struct platform_device *pdev = usbhs_priv_to_pdev(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	if (enable) {
+		/* enable PM */
+		pm_runtime_get_sync(dev);
+
+		/* enable clks */
+		if (usbhsc_clk_prepare_enable(priv))
+			return;
+
+		/* enable platform power */
+		usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
+
+		/* USB on */
+		usbhs_sys_clock_ctrl(priv, enable);
+	} else {
+		/* USB off */
+		usbhs_sys_clock_ctrl(priv, enable);
+
+		/* disable platform power */
+		usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
+
+		/* disable clks */
+		usbhsc_clk_disable_unprepare(priv);
+
+		/* disable PM */
+		pm_runtime_put_sync(dev);
+	}
+}
+
+/*
+ *		hotplug
+ */
+static void usbhsc_hotplug(struct usbhs_priv *priv)
+{
+	struct platform_device *pdev = usbhs_priv_to_pdev(priv);
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	int id;
+	int enable;
+	int cable;
+	int ret;
+
+	/*
+	 * get vbus status from platform
+	 */
+	enable = usbhs_mod_info_call(priv, get_vbus, pdev);
+
+	/*
+	 * get id from platform
+	 */
+	id = usbhs_platform_call(priv, get_id, pdev);
+
+	if (enable && !mod) {
+		if (priv->edev) {
+			cable = extcon_get_state(priv->edev, EXTCON_USB_HOST);
+			if ((cable > 0 && id != USBHS_HOST) ||
+			    (!cable && id != USBHS_GADGET)) {
+				dev_info(&pdev->dev,
+					 "USB cable plugged in doesn't match the selected role!\n");
+				return;
+			}
+		}
+
+		ret = usbhs_mod_change(priv, id);
+		if (ret < 0)
+			return;
+
+		dev_dbg(&pdev->dev, "%s enable\n", __func__);
+
+		/* power on */
+		if (usbhs_get_dparam(priv, runtime_pwctrl))
+			usbhsc_power_ctrl(priv, enable);
+
+		/* bus init */
+		usbhsc_set_buswait(priv);
+		usbhsc_bus_init(priv);
+
+		/* module start */
+		usbhs_mod_call(priv, start, priv);
+
+	} else if (!enable && mod) {
+		dev_dbg(&pdev->dev, "%s disable\n", __func__);
+
+		/* module stop */
+		usbhs_mod_call(priv, stop, priv);
+
+		/* bus init */
+		usbhsc_bus_init(priv);
+
+		/* power off */
+		if (usbhs_get_dparam(priv, runtime_pwctrl))
+			usbhsc_power_ctrl(priv, enable);
+
+		usbhs_mod_change(priv, -1);
+
+		/* reset phy for next connection */
+		usbhs_platform_call(priv, phy_reset, pdev);
+	}
+}
+
+/*
+ *		notify hotplug
+ */
+static void usbhsc_notify_hotplug(struct work_struct *work)
+{
+	struct usbhs_priv *priv = container_of(work,
+					       struct usbhs_priv,
+					       notify_hotplug_work.work);
+	usbhsc_hotplug(priv);
+}
+
+int usbhsc_schedule_notify_hotplug(struct platform_device *pdev)
+{
+	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
+	int delay = usbhs_get_dparam(priv, detection_delay);
+
+	/*
+	 * This functions will be called in interrupt.
+	 * To make sure safety context,
+	 * use workqueue for usbhs_notify_hotplug
+	 */
+	schedule_delayed_work(&priv->notify_hotplug_work,
+			      msecs_to_jiffies(delay));
+	return 0;
+}
+
+/*
+ *		platform functions
+ */
+static const struct of_device_id usbhs_of_match[] = {
+	{
+		.compatible = "renesas,usbhs-r8a774c0",
+		.data = &usbhs_rcar_gen3_with_pll_plat_info,
+	},
+	{
+		.compatible = "renesas,usbhs-r8a7790",
+		.data = &usbhs_rcar_gen2_plat_info,
+	},
+	{
+		.compatible = "renesas,usbhs-r8a7791",
+		.data = &usbhs_rcar_gen2_plat_info,
+	},
+	{
+		.compatible = "renesas,usbhs-r8a7794",
+		.data = &usbhs_rcar_gen2_plat_info,
+	},
+	{
+		.compatible = "renesas,usbhs-r8a7795",
+		.data = &usbhs_rcar_gen3_plat_info,
+	},
+	{
+		.compatible = "renesas,usbhs-r8a7796",
+		.data = &usbhs_rcar_gen3_plat_info,
+	},
+	{
+		.compatible = "renesas,usbhs-r8a77990",
+		.data = &usbhs_rcar_gen3_with_pll_plat_info,
+	},
+	{
+		.compatible = "renesas,usbhs-r8a77995",
+		.data = &usbhs_rcar_gen3_with_pll_plat_info,
+	},
+	{
+		.compatible = "renesas,rcar-gen2-usbhs",
+		.data = &usbhs_rcar_gen2_plat_info,
+	},
+	{
+		.compatible = "renesas,rcar-gen3-usbhs",
+		.data = &usbhs_rcar_gen3_plat_info,
+	},
+	{
+		.compatible = "renesas,rza1-usbhs",
+		.data = &usbhs_rza1_plat_info,
+	},
+	{
+		.compatible = "renesas,rza2-usbhs",
+		.data = &usbhs_rza2_plat_info,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, usbhs_of_match);
+
+static int usbhs_probe(struct platform_device *pdev)
+{
+	const struct renesas_usbhs_platform_info *info;
+	struct usbhs_priv *priv;
+	struct device *dev = &pdev->dev;
+	struct gpio_desc *gpiod;
+	int ret;
+	u32 tmp;
+	int irq;
+
+	/* check device node */
+	if (dev_of_node(dev))
+		info = of_device_get_match_data(dev);
+	else
+		info = renesas_usbhs_get_info(pdev);
+
+	/* check platform information */
+	if (!info) {
+		dev_err(dev, "no platform information\n");
+		return -EINVAL;
+	}
+
+	/* platform data */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	/* usb private data */
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	if (of_property_read_bool(dev_of_node(dev), "extcon")) {
+		priv->edev = extcon_get_edev_by_phandle(dev, 0);
+		if (IS_ERR(priv->edev))
+			return PTR_ERR(priv->edev);
+	}
+
+	priv->rsts = devm_reset_control_array_get_optional_shared(dev);
+	if (IS_ERR(priv->rsts))
+		return PTR_ERR(priv->rsts);
+
+	/*
+	 * care platform info
+	 */
+
+	priv->dparam = info->driver_param;
+
+	if (!info->platform_callback.get_id) {
+		dev_err(dev, "no platform callbacks\n");
+		return -EINVAL;
+	}
+	priv->pfunc = &info->platform_callback;
+
+	/* set default param if platform doesn't have */
+	if (usbhs_get_dparam(priv, has_new_pipe_configs)) {
+		priv->dparam.pipe_configs = usbhsc_new_pipe;
+		priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
+	} else if (!priv->dparam.pipe_configs) {
+		priv->dparam.pipe_configs = usbhsc_default_pipe;
+		priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe);
+	}
+	if (!priv->dparam.pio_dma_border)
+		priv->dparam.pio_dma_border = 64; /* 64byte */
+	if (!of_property_read_u32(dev_of_node(dev), "renesas,buswait", &tmp))
+		priv->dparam.buswait_bwait = tmp;
+	gpiod = devm_gpiod_get_optional(dev, "renesas,enable", GPIOD_IN);
+	if (IS_ERR(gpiod))
+		return PTR_ERR(gpiod);
+
+	/* FIXME */
+	/* runtime power control ? */
+	if (priv->pfunc->get_vbus)
+		usbhs_get_dparam(priv, runtime_pwctrl) = 1;
+
+	/*
+	 * priv settings
+	 */
+	priv->irq = irq;
+	priv->pdev	= pdev;
+	INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug);
+	spin_lock_init(usbhs_priv_to_lock(priv));
+
+	/* call pipe and module init */
+	ret = usbhs_pipe_probe(priv);
+	if (ret < 0)
+		return ret;
+
+	ret = usbhs_fifo_probe(priv);
+	if (ret < 0)
+		goto probe_end_pipe_exit;
+
+	ret = usbhs_mod_probe(priv);
+	if (ret < 0)
+		goto probe_end_fifo_exit;
+
+	/* dev_set_drvdata should be called after usbhs_mod_init */
+	platform_set_drvdata(pdev, priv);
+
+	ret = reset_control_deassert(priv->rsts);
+	if (ret)
+		goto probe_fail_rst;
+
+	ret = usbhsc_clk_get(dev, priv);
+	if (ret)
+		goto probe_fail_clks;
+
+	/*
+	 * deviece reset here because
+	 * USB device might be used in boot loader.
+	 */
+	usbhs_sys_clock_ctrl(priv, 0);
+
+	/* check GPIO determining if USB function should be enabled */
+	if (gpiod) {
+		ret = !gpiod_get_value(gpiod);
+		if (ret) {
+			dev_warn(dev, "USB function not selected (GPIO)\n");
+			ret = -ENOTSUPP;
+			goto probe_end_mod_exit;
+		}
+	}
+
+	/*
+	 * platform call
+	 *
+	 * USB phy setup might depend on CPU/Board.
+	 * If platform has its callback functions,
+	 * call it here.
+	 */
+	ret = usbhs_platform_call(priv, hardware_init, pdev);
+	if (ret < 0) {
+		dev_err(dev, "platform init failed.\n");
+		goto probe_end_mod_exit;
+	}
+
+	/* reset phy for connection */
+	usbhs_platform_call(priv, phy_reset, pdev);
+
+	/* power control */
+	pm_runtime_enable(dev);
+	if (!usbhs_get_dparam(priv, runtime_pwctrl)) {
+		usbhsc_power_ctrl(priv, 1);
+		usbhs_mod_autonomy_mode(priv);
+	} else {
+		usbhs_mod_non_autonomy_mode(priv);
+	}
+
+	/*
+	 * manual call notify_hotplug for cold plug
+	 */
+	usbhsc_schedule_notify_hotplug(pdev);
+
+	dev_info(dev, "probed\n");
+
+	return ret;
+
+probe_end_mod_exit:
+	usbhsc_clk_put(priv);
+probe_fail_clks:
+	reset_control_assert(priv->rsts);
+probe_fail_rst:
+	usbhs_mod_remove(priv);
+probe_end_fifo_exit:
+	usbhs_fifo_remove(priv);
+probe_end_pipe_exit:
+	usbhs_pipe_remove(priv);
+
+	dev_info(dev, "probe failed (%d)\n", ret);
+
+	return ret;
+}
+
+static int usbhs_remove(struct platform_device *pdev)
+{
+	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
+
+	dev_dbg(&pdev->dev, "usb remove\n");
+
+	/* power off */
+	if (!usbhs_get_dparam(priv, runtime_pwctrl))
+		usbhsc_power_ctrl(priv, 0);
+
+	pm_runtime_disable(&pdev->dev);
+
+	usbhs_platform_call(priv, hardware_exit, pdev);
+	usbhsc_clk_put(priv);
+	reset_control_assert(priv->rsts);
+	usbhs_mod_remove(priv);
+	usbhs_fifo_remove(priv);
+	usbhs_pipe_remove(priv);
+
+	return 0;
+}
+
+static __maybe_unused int usbhsc_suspend(struct device *dev)
+{
+	struct usbhs_priv *priv = dev_get_drvdata(dev);
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+
+	if (mod) {
+		usbhs_mod_call(priv, stop, priv);
+		usbhs_mod_change(priv, -1);
+	}
+
+	if (mod || !usbhs_get_dparam(priv, runtime_pwctrl))
+		usbhsc_power_ctrl(priv, 0);
+
+	return 0;
+}
+
+static __maybe_unused int usbhsc_resume(struct device *dev)
+{
+	struct usbhs_priv *priv = dev_get_drvdata(dev);
+	struct platform_device *pdev = usbhs_priv_to_pdev(priv);
+
+	if (!usbhs_get_dparam(priv, runtime_pwctrl)) {
+		usbhsc_power_ctrl(priv, 1);
+		usbhs_mod_autonomy_mode(priv);
+	}
+
+	usbhs_platform_call(priv, phy_reset, pdev);
+
+	usbhsc_schedule_notify_hotplug(pdev);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(usbhsc_pm_ops, usbhsc_suspend, usbhsc_resume);
+
+static struct platform_driver renesas_usbhs_driver = {
+	.driver		= {
+		.name	= "renesas_usbhs",
+		.pm	= &usbhsc_pm_ops,
+		.of_match_table = of_match_ptr(usbhs_of_match),
+	},
+	.probe		= usbhs_probe,
+	.remove		= usbhs_remove,
+};
+
+module_platform_driver(renesas_usbhs_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Renesas USB driver");
+MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
new file mode 100644
index 000000000..3fb5bc94d
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -0,0 +1,346 @@
+/* SPDX-License-Identifier: GPL-1.0+ */
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2019 Renesas Electronics Corporation
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#ifndef RENESAS_USB_DRIVER_H
+#define RENESAS_USB_DRIVER_H
+
+#include <linux/clk.h>
+#include <linux/extcon.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/usb/renesas_usbhs.h>
+
+struct usbhs_priv;
+
+#include "mod.h"
+#include "pipe.h"
+
+/*
+ *
+ *		register define
+ *
+ */
+#define SYSCFG		0x0000
+#define BUSWAIT		0x0002
+#define DVSTCTR		0x0008
+#define TESTMODE	0x000C
+#define CFIFO		0x0014
+#define CFIFOSEL	0x0020
+#define CFIFOCTR	0x0022
+#define D0FIFO		0x0100
+#define D0FIFOSEL	0x0028
+#define D0FIFOCTR	0x002A
+#define D1FIFO		0x0120
+#define D1FIFOSEL	0x002C
+#define D1FIFOCTR	0x002E
+#define INTENB0		0x0030
+#define INTENB1		0x0032
+#define BRDYENB		0x0036
+#define NRDYENB		0x0038
+#define BEMPENB		0x003A
+#define INTSTS0		0x0040
+#define INTSTS1		0x0042
+#define BRDYSTS		0x0046
+#define NRDYSTS		0x0048
+#define BEMPSTS		0x004A
+#define FRMNUM		0x004C
+#define USBREQ		0x0054	/* USB request type register */
+#define USBVAL		0x0056	/* USB request value register */
+#define USBINDX		0x0058	/* USB request index register */
+#define USBLENG		0x005A	/* USB request length register */
+#define DCPCFG		0x005C
+#define DCPMAXP		0x005E
+#define DCPCTR		0x0060
+#define PIPESEL		0x0064
+#define PIPECFG		0x0068
+#define PIPEBUF		0x006A
+#define PIPEMAXP	0x006C
+#define PIPEPERI	0x006E
+#define PIPEnCTR	0x0070
+#define PIPE1TRE	0x0090
+#define PIPE1TRN	0x0092
+#define PIPE2TRE	0x0094
+#define PIPE2TRN	0x0096
+#define PIPE3TRE	0x0098
+#define PIPE3TRN	0x009A
+#define PIPE4TRE	0x009C
+#define PIPE4TRN	0x009E
+#define PIPE5TRE	0x00A0
+#define PIPE5TRN	0x00A2
+#define PIPEBTRE	0x00A4
+#define PIPEBTRN	0x00A6
+#define PIPECTRE	0x00A8
+#define PIPECTRN	0x00AA
+#define PIPEDTRE	0x00AC
+#define PIPEDTRN	0x00AE
+#define PIPEETRE	0x00B0
+#define PIPEETRN	0x00B2
+#define PIPEFTRE	0x00B4
+#define PIPEFTRN	0x00B6
+#define PIPE9TRE	0x00B8
+#define PIPE9TRN	0x00BA
+#define PIPEATRE	0x00BC
+#define PIPEATRN	0x00BE
+#define DEVADD0		0x00D0 /* Device address n configuration */
+#define DEVADD1		0x00D2
+#define DEVADD2		0x00D4
+#define DEVADD3		0x00D6
+#define DEVADD4		0x00D8
+#define DEVADD5		0x00DA
+#define DEVADD6		0x00DC
+#define DEVADD7		0x00DE
+#define DEVADD8		0x00E0
+#define DEVADD9		0x00E2
+#define DEVADDA		0x00E4
+#define D2FIFOSEL	0x00F0	/* for R-Car Gen2 */
+#define D2FIFOCTR	0x00F2	/* for R-Car Gen2 */
+#define D3FIFOSEL	0x00F4	/* for R-Car Gen2 */
+#define D3FIFOCTR	0x00F6	/* for R-Car Gen2 */
+#define SUSPMODE	0x0102	/* for RZ/A */
+
+/* SYSCFG */
+#define SCKE	(1 << 10)	/* USB Module Clock Enable */
+#define CNEN	(1 << 8)	/* Single-ended receiver operation Enable */
+#define HSE	(1 << 7)	/* High-Speed Operation Enable */
+#define DCFM	(1 << 6)	/* Controller Function Select */
+#define DRPD	(1 << 5)	/* D+ Line/D- Line Resistance Control */
+#define DPRPU	(1 << 4)	/* D+ Line Resistance Control */
+#define USBE	(1 << 0)	/* USB Module Operation Enable */
+#define UCKSEL	(1 << 2)	/* Clock Select for RZ/A1 */
+#define UPLLE	(1 << 1)	/* USB PLL Enable for RZ/A1 */
+
+/* DVSTCTR */
+#define EXTLP	(1 << 10)	/* Controls the EXTLP pin output state */
+#define PWEN	(1 << 9)	/* Controls the PWEN pin output state */
+#define USBRST	(1 << 6)	/* Bus Reset Output */
+#define UACT	(1 << 4)	/* USB Bus Enable */
+#define RHST	(0x7)		/* Reset Handshake */
+#define  RHST_LOW_SPEED  1	/* Low-speed connection */
+#define  RHST_FULL_SPEED 2	/* Full-speed connection */
+#define  RHST_HIGH_SPEED 3	/* High-speed connection */
+
+/* CFIFOSEL */
+#define DREQE	(1 << 12)	/* DMA Transfer Request Enable */
+#define MBW_32	(0x2 << 10)	/* CFIFO Port Access Bit Width */
+
+/* CFIFOCTR */
+#define BVAL	(1 << 15)	/* Buffer Memory Enable Flag */
+#define BCLR	(1 << 14)	/* CPU buffer clear */
+#define FRDY	(1 << 13)	/* FIFO Port Ready */
+#define DTLN_MASK (0x0FFF)	/* Receive Data Length */
+
+/* INTENB0 */
+#define VBSE	(1 << 15)	/* Enable IRQ VBUS_0 and VBUSIN_0 */
+#define RSME	(1 << 14)	/* Enable IRQ Resume */
+#define SOFE	(1 << 13)	/* Enable IRQ Frame Number Update */
+#define DVSE	(1 << 12)	/* Enable IRQ Device State Transition */
+#define CTRE	(1 << 11)	/* Enable IRQ Control Stage Transition */
+#define BEMPE	(1 << 10)	/* Enable IRQ Buffer Empty */
+#define NRDYE	(1 << 9)	/* Enable IRQ Buffer Not Ready Response */
+#define BRDYE	(1 << 8)	/* Enable IRQ Buffer Ready */
+
+/* INTENB1 */
+#define BCHGE	(1 << 14)	/* USB Bus Change Interrupt Enable */
+#define DTCHE	(1 << 12)	/* Disconnection Detect Interrupt Enable */
+#define ATTCHE	(1 << 11)	/* Connection Detect Interrupt Enable */
+#define EOFERRE	(1 << 6)	/* EOF Error Detect Interrupt Enable */
+#define SIGNE	(1 << 5)	/* Setup Transaction Error Interrupt Enable */
+#define SACKE	(1 << 4)	/* Setup Transaction ACK Interrupt Enable */
+
+/* INTSTS0 */
+#define VBINT	(1 << 15)	/* VBUS0_0 and VBUS1_0 Interrupt Status */
+#define DVST	(1 << 12)	/* Device State Transition Interrupt Status */
+#define CTRT	(1 << 11)	/* Control Stage Interrupt Status */
+#define BEMP	(1 << 10)	/* Buffer Empty Interrupt Status */
+#define BRDY	(1 << 8)	/* Buffer Ready Interrupt Status */
+#define VBSTS	(1 << 7)	/* VBUS_0 and VBUSIN_0 Input Status */
+#define VALID	(1 << 3)	/* USB Request Receive */
+
+#define DVSQ_MASK		(0x7 << 4)	/* Device State */
+#define  POWER_STATE		(0 << 4)
+#define  DEFAULT_STATE		(1 << 4)
+#define  ADDRESS_STATE		(2 << 4)
+#define  CONFIGURATION_STATE	(3 << 4)
+#define  SUSPENDED_STATE	(4 << 4)
+
+#define CTSQ_MASK		(0x7)	/* Control Transfer Stage */
+#define  IDLE_SETUP_STAGE	0	/* Idle stage or setup stage */
+#define  READ_DATA_STAGE	1	/* Control read data stage */
+#define  READ_STATUS_STAGE	2	/* Control read status stage */
+#define  WRITE_DATA_STAGE	3	/* Control write data stage */
+#define  WRITE_STATUS_STAGE	4	/* Control write status stage */
+#define  NODATA_STATUS_STAGE	5	/* Control write NoData status stage */
+#define  SEQUENCE_ERROR		6	/* Control transfer sequence error */
+
+/* INTSTS1 */
+#define OVRCR	(1 << 15) /* OVRCR Interrupt Status */
+#define BCHG	(1 << 14) /* USB Bus Change Interrupt Status */
+#define DTCH	(1 << 12) /* USB Disconnection Detect Interrupt Status */
+#define ATTCH	(1 << 11) /* ATTCH Interrupt Status */
+#define EOFERR	(1 << 6)  /* EOF Error Detect Interrupt Status */
+#define SIGN	(1 << 5)  /* Setup Transaction Error Interrupt Status */
+#define SACK	(1 << 4)  /* Setup Transaction ACK Response Interrupt Status */
+
+/* PIPECFG */
+/* DCPCFG */
+#define TYPE_NONE	(0 << 14)	/* Transfer Type */
+#define TYPE_BULK	(1 << 14)
+#define TYPE_INT	(2 << 14)
+#define TYPE_ISO	(3 << 14)
+#define BFRE		(1 << 10)	/* BRDY Interrupt Operation Spec. */
+#define DBLB		(1 << 9)	/* Double Buffer Mode */
+#define SHTNAK		(1 << 7)	/* Pipe Disable in Transfer End */
+#define DIR_OUT		(1 << 4)	/* Transfer Direction */
+
+/* PIPEMAXP */
+/* DCPMAXP */
+#define DEVSEL_MASK	(0xF << 12)	/* Device Select */
+#define DCP_MAXP_MASK	(0x7F)
+#define PIPE_MAXP_MASK	(0x7FF)
+
+/* PIPEBUF */
+#define BUFSIZE_SHIFT	10
+#define BUFSIZE_MASK	(0x1F << BUFSIZE_SHIFT)
+#define BUFNMB_MASK	(0xFF)
+
+/* PIPEnCTR */
+/* DCPCTR */
+#define BSTS		(1 << 15)	/* Buffer Status */
+#define SUREQ		(1 << 14)	/* Sending SETUP Token */
+#define INBUFM		(1 << 14)	/* (PIPEnCTR) Transfer Buffer Monitor */
+#define CSSTS		(1 << 12)	/* CSSTS Status */
+#define	ACLRM		(1 << 9)	/* Buffer Auto-Clear Mode */
+#define SQCLR		(1 << 8)	/* Toggle Bit Clear */
+#define SQSET		(1 << 7)	/* Toggle Bit Set */
+#define SQMON		(1 << 6)	/* Toggle Bit Check */
+#define PBUSY		(1 << 5)	/* Pipe Busy */
+#define PID_MASK	(0x3)		/* Response PID */
+#define  PID_NAK	0
+#define  PID_BUF	1
+#define  PID_STALL10	2
+#define  PID_STALL11	3
+
+#define CCPL		(1 << 2)	/* Control Transfer End Enable */
+
+/* PIPEnTRE */
+#define TRENB		(1 << 9)	/* Transaction Counter Enable */
+#define TRCLR		(1 << 8)	/* Transaction Counter Clear */
+
+/* FRMNUM */
+#define FRNM_MASK	(0x7FF)
+
+/* DEVADDn */
+#define UPPHUB(x)	(((x) & 0xF) << 11)	/* HUB Register */
+#define HUBPORT(x)	(((x) & 0x7) << 8)	/* HUB Port for Target Device */
+#define USBSPD(x)	(((x) & 0x3) << 6)	/* Device Transfer Rate */
+#define USBSPD_SPEED_LOW	0x1
+#define USBSPD_SPEED_FULL	0x2
+#define USBSPD_SPEED_HIGH	0x3
+
+/* SUSPMODE */
+#define SUSPM		(1 << 14)	/* SuspendM Control */
+
+/*
+ *		struct
+ */
+struct usbhs_priv {
+
+	void __iomem *base;
+	unsigned int irq;
+
+	const struct renesas_usbhs_platform_callback *pfunc;
+	struct renesas_usbhs_driver_param	dparam;
+
+	struct delayed_work notify_hotplug_work;
+	struct platform_device *pdev;
+
+	struct extcon_dev *edev;
+
+	spinlock_t		lock;
+
+	/*
+	 * module control
+	 */
+	struct usbhs_mod_info mod_info;
+
+	/*
+	 * pipe control
+	 */
+	struct usbhs_pipe_info pipe_info;
+
+	/*
+	 * fifo control
+	 */
+	struct usbhs_fifo_info fifo_info;
+
+	struct phy *phy;
+	struct reset_control *rsts;
+	struct clk *clks[2];
+};
+
+/*
+ * common
+ */
+u16 usbhs_read(struct usbhs_priv *priv, u32 reg);
+void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data);
+void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data);
+
+#define usbhs_lock(p, f) spin_lock_irqsave(usbhs_priv_to_lock(p), f)
+#define usbhs_unlock(p, f) spin_unlock_irqrestore(usbhs_priv_to_lock(p), f)
+
+int usbhs_get_id_as_gadget(struct platform_device *pdev);
+
+/*
+ * sysconfig
+ */
+void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable);
+void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable);
+void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable);
+void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode);
+
+/*
+ * usb request
+ */
+void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);
+void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);
+
+/*
+ * bus
+ */
+void usbhs_bus_send_sof_enable(struct usbhs_priv *priv);
+void usbhs_bus_send_reset(struct usbhs_priv *priv);
+int usbhs_bus_get_speed(struct usbhs_priv *priv);
+int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable);
+int usbhsc_schedule_notify_hotplug(struct platform_device *pdev);
+
+/*
+ * frame
+ */
+int usbhs_frame_get_num(struct usbhs_priv *priv);
+
+/*
+ * device config
+ */
+int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, u16 upphub,
+			   u16 hubport, u16 speed);
+
+/*
+ * interrupt functions
+ */
+void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit);
+
+/*
+ * data
+ */
+struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev);
+#define usbhs_get_dparam(priv, param)	(priv->dparam.param)
+#define usbhs_priv_to_pdev(priv)	(priv->pdev)
+#define usbhs_priv_to_dev(priv)		(&priv->pdev->dev)
+#define usbhs_priv_to_lock(priv)	(&priv->lock)
+
+#endif /* RENESAS_USB_DRIVER_H */
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
new file mode 100644
index 000000000..10607e273
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -0,0 +1,1486 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2019 Renesas Electronics Corporation
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/scatterlist.h>
+#include "common.h"
+#include "pipe.h"
+
+#define usbhsf_get_cfifo(p)	(&((p)->fifo_info.cfifo))
+
+#define usbhsf_fifo_is_busy(f)	((f)->pipe) /* see usbhs_pipe_select_fifo */
+
+/*
+ *		packet initialize
+ */
+void usbhs_pkt_init(struct usbhs_pkt *pkt)
+{
+	INIT_LIST_HEAD(&pkt->node);
+}
+
+/*
+ *		packet control function
+ */
+static int usbhsf_null_handle(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_err(dev, "null handler\n");
+
+	return -EINVAL;
+}
+
+static const struct usbhs_pkt_handle usbhsf_null_handler = {
+	.prepare = usbhsf_null_handle,
+	.try_run = usbhsf_null_handle,
+};
+
+void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt,
+		    void (*done)(struct usbhs_priv *priv,
+				 struct usbhs_pkt *pkt),
+		    void *buf, int len, int zero, int sequence)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	unsigned long flags;
+
+	if (!done) {
+		dev_err(dev, "no done function\n");
+		return;
+	}
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	if (!pipe->handler) {
+		dev_err(dev, "no handler function\n");
+		pipe->handler = &usbhsf_null_handler;
+	}
+
+	list_move_tail(&pkt->node, &pipe->list);
+
+	/*
+	 * each pkt must hold own handler.
+	 * because handler might be changed by its situation.
+	 * dma handler -> pio handler.
+	 */
+	pkt->pipe	= pipe;
+	pkt->buf	= buf;
+	pkt->handler	= pipe->handler;
+	pkt->length	= len;
+	pkt->zero	= zero;
+	pkt->actual	= 0;
+	pkt->done	= done;
+	pkt->sequence	= sequence;
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+}
+
+static void __usbhsf_pkt_del(struct usbhs_pkt *pkt)
+{
+	list_del_init(&pkt->node);
+}
+
+struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
+{
+	return list_first_entry_or_null(&pipe->list, struct usbhs_pkt, node);
+}
+
+static void usbhsf_fifo_unselect(struct usbhs_pipe *pipe,
+				 struct usbhs_fifo *fifo);
+static struct dma_chan *usbhsf_dma_chan_get(struct usbhs_fifo *fifo,
+					    struct usbhs_pkt *pkt);
+#define usbhsf_dma_map(p)	__usbhsf_dma_map_ctrl(p, 1)
+#define usbhsf_dma_unmap(p)	__usbhsf_dma_map_ctrl(p, 0)
+static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map);
+static void usbhsf_tx_irq_ctrl(struct usbhs_pipe *pipe, int enable);
+static void usbhsf_rx_irq_ctrl(struct usbhs_pipe *pipe, int enable);
+struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe);
+	unsigned long flags;
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	usbhs_pipe_disable(pipe);
+
+	if (!pkt)
+		pkt = __usbhsf_pkt_get(pipe);
+
+	if (pkt) {
+		struct dma_chan *chan = NULL;
+
+		if (fifo)
+			chan = usbhsf_dma_chan_get(fifo, pkt);
+		if (chan) {
+			dmaengine_terminate_all(chan);
+			usbhsf_dma_unmap(pkt);
+		} else {
+			if (usbhs_pipe_is_dir_in(pipe))
+				usbhsf_rx_irq_ctrl(pipe, 0);
+			else
+				usbhsf_tx_irq_ctrl(pipe, 0);
+		}
+
+		usbhs_pipe_clear_without_sequence(pipe, 0, 0);
+		usbhs_pipe_running(pipe, 0);
+
+		__usbhsf_pkt_del(pkt);
+	}
+
+	if (fifo)
+		usbhsf_fifo_unselect(pipe, fifo);
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+
+	return pkt;
+}
+
+enum {
+	USBHSF_PKT_PREPARE,
+	USBHSF_PKT_TRY_RUN,
+	USBHSF_PKT_DMA_DONE,
+};
+
+static int usbhsf_pkt_handler(struct usbhs_pipe *pipe, int type)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_pkt *pkt;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int (*func)(struct usbhs_pkt *pkt, int *is_done);
+	unsigned long flags;
+	int ret = 0;
+	int is_done = 0;
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	pkt = __usbhsf_pkt_get(pipe);
+	if (!pkt) {
+		ret = -EINVAL;
+		goto __usbhs_pkt_handler_end;
+	}
+
+	switch (type) {
+	case USBHSF_PKT_PREPARE:
+		func = pkt->handler->prepare;
+		break;
+	case USBHSF_PKT_TRY_RUN:
+		func = pkt->handler->try_run;
+		break;
+	case USBHSF_PKT_DMA_DONE:
+		func = pkt->handler->dma_done;
+		break;
+	default:
+		dev_err(dev, "unknown pkt handler\n");
+		goto __usbhs_pkt_handler_end;
+	}
+
+	if (likely(func))
+		ret = func(pkt, &is_done);
+
+	if (is_done)
+		__usbhsf_pkt_del(pkt);
+
+__usbhs_pkt_handler_end:
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+
+	if (is_done) {
+		pkt->done(priv, pkt);
+		usbhs_pkt_start(pipe);
+	}
+
+	return ret;
+}
+
+void usbhs_pkt_start(struct usbhs_pipe *pipe)
+{
+	usbhsf_pkt_handler(pipe, USBHSF_PKT_PREPARE);
+}
+
+/*
+ *		irq enable/disable function
+ */
+#define usbhsf_irq_empty_ctrl(p, e) usbhsf_irq_callback_ctrl(p, irq_bempsts, e)
+#define usbhsf_irq_ready_ctrl(p, e) usbhsf_irq_callback_ctrl(p, irq_brdysts, e)
+#define usbhsf_irq_callback_ctrl(pipe, status, enable)			\
+	({								\
+		struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);	\
+		struct usbhs_mod *mod = usbhs_mod_get_current(priv);	\
+		u16 status = (1 << usbhs_pipe_number(pipe));		\
+		if (!mod)						\
+			return;						\
+		if (enable)						\
+			mod->status |= status;				\
+		else							\
+			mod->status &= ~status;				\
+		usbhs_irq_callback_update(priv, mod);			\
+	})
+
+static void usbhsf_tx_irq_ctrl(struct usbhs_pipe *pipe, int enable)
+{
+	/*
+	 * And DCP pipe can NOT use "ready interrupt" for "send"
+	 * it should use "empty" interrupt.
+	 * see
+	 *   "Operation" - "Interrupt Function" - "BRDY Interrupt"
+	 *
+	 * on the other hand, normal pipe can use "ready interrupt" for "send"
+	 * even though it is single/double buffer
+	 */
+	if (usbhs_pipe_is_dcp(pipe))
+		usbhsf_irq_empty_ctrl(pipe, enable);
+	else
+		usbhsf_irq_ready_ctrl(pipe, enable);
+}
+
+static void usbhsf_rx_irq_ctrl(struct usbhs_pipe *pipe, int enable)
+{
+	usbhsf_irq_ready_ctrl(pipe, enable);
+}
+
+/*
+ *		FIFO ctrl
+ */
+static void usbhsf_send_terminator(struct usbhs_pipe *pipe,
+				   struct usbhs_fifo *fifo)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	usbhs_bset(priv, fifo->ctr, BVAL, BVAL);
+}
+
+static int usbhsf_fifo_barrier(struct usbhs_priv *priv,
+			       struct usbhs_fifo *fifo)
+{
+	/* The FIFO port is accessible */
+	if (usbhs_read(priv, fifo->ctr) & FRDY)
+		return 0;
+
+	return -EBUSY;
+}
+
+static void usbhsf_fifo_clear(struct usbhs_pipe *pipe,
+			      struct usbhs_fifo *fifo)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	int ret = 0;
+
+	if (!usbhs_pipe_is_dcp(pipe)) {
+		/*
+		 * This driver checks the pipe condition first to avoid -EBUSY
+		 * from usbhsf_fifo_barrier() if the pipe is RX direction and
+		 * empty.
+		 */
+		if (usbhs_pipe_is_dir_in(pipe))
+			ret = usbhs_pipe_is_accessible(pipe);
+		if (!ret)
+			ret = usbhsf_fifo_barrier(priv, fifo);
+	}
+
+	/*
+	 * if non-DCP pipe, this driver should set BCLR when
+	 * usbhsf_fifo_barrier() returns 0.
+	 */
+	if (!ret)
+		usbhs_write(priv, fifo->ctr, BCLR);
+}
+
+static int usbhsf_fifo_rcv_len(struct usbhs_priv *priv,
+			       struct usbhs_fifo *fifo)
+{
+	return usbhs_read(priv, fifo->ctr) & DTLN_MASK;
+}
+
+static void usbhsf_fifo_unselect(struct usbhs_pipe *pipe,
+				 struct usbhs_fifo *fifo)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	usbhs_pipe_select_fifo(pipe, NULL);
+	usbhs_write(priv, fifo->sel, 0);
+}
+
+static int usbhsf_fifo_select(struct usbhs_pipe *pipe,
+			      struct usbhs_fifo *fifo,
+			      int write)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int timeout = 1024;
+	u16 mask = ((1 << 5) | 0xF);		/* mask of ISEL | CURPIPE */
+	u16 base = usbhs_pipe_number(pipe);	/* CURPIPE */
+
+	if (usbhs_pipe_is_busy(pipe) ||
+	    usbhsf_fifo_is_busy(fifo))
+		return -EBUSY;
+
+	if (usbhs_pipe_is_dcp(pipe)) {
+		base |= (1 == write) << 5;	/* ISEL */
+
+		if (usbhs_mod_is_host(priv))
+			usbhs_dcp_dir_for_host(pipe, write);
+	}
+
+	/* "base" will be used below  */
+	usbhs_write(priv, fifo->sel, base | MBW_32);
+
+	/* check ISEL and CURPIPE value */
+	while (timeout--) {
+		if (base == (mask & usbhs_read(priv, fifo->sel))) {
+			usbhs_pipe_select_fifo(pipe, fifo);
+			return 0;
+		}
+		udelay(10);
+	}
+
+	dev_err(dev, "fifo select error\n");
+
+	return -EIO;
+}
+
+/*
+ *		DCP status stage
+ */
+static int usbhs_dcp_dir_switch_to_write(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int ret;
+
+	usbhs_pipe_disable(pipe);
+
+	ret = usbhsf_fifo_select(pipe, fifo, 1);
+	if (ret < 0) {
+		dev_err(dev, "%s() failed\n", __func__);
+		return ret;
+	}
+
+	usbhs_pipe_sequence_data1(pipe); /* DATA1 */
+
+	usbhsf_fifo_clear(pipe, fifo);
+	usbhsf_send_terminator(pipe, fifo);
+
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	usbhsf_tx_irq_ctrl(pipe, 1);
+	usbhs_pipe_enable(pipe);
+
+	return ret;
+}
+
+static int usbhs_dcp_dir_switch_to_read(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int ret;
+
+	usbhs_pipe_disable(pipe);
+
+	ret = usbhsf_fifo_select(pipe, fifo, 0);
+	if (ret < 0) {
+		dev_err(dev, "%s() fail\n", __func__);
+		return ret;
+	}
+
+	usbhs_pipe_sequence_data1(pipe); /* DATA1 */
+	usbhsf_fifo_clear(pipe, fifo);
+
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	usbhsf_rx_irq_ctrl(pipe, 1);
+	usbhs_pipe_enable(pipe);
+
+	return ret;
+
+}
+
+static int usbhs_dcp_dir_switch_done(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+
+	if (pkt->handler == &usbhs_dcp_status_stage_in_handler)
+		usbhsf_tx_irq_ctrl(pipe, 0);
+	else
+		usbhsf_rx_irq_ctrl(pipe, 0);
+
+	pkt->actual = pkt->length;
+	*is_done = 1;
+
+	return 0;
+}
+
+const struct usbhs_pkt_handle usbhs_dcp_status_stage_in_handler = {
+	.prepare = usbhs_dcp_dir_switch_to_write,
+	.try_run = usbhs_dcp_dir_switch_done,
+};
+
+const struct usbhs_pkt_handle usbhs_dcp_status_stage_out_handler = {
+	.prepare = usbhs_dcp_dir_switch_to_read,
+	.try_run = usbhs_dcp_dir_switch_done,
+};
+
+/*
+ *		DCP data stage (push)
+ */
+static int usbhsf_dcp_data_stage_try_push(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+
+	usbhs_pipe_sequence_data1(pipe); /* DATA1 */
+
+	/*
+	 * change handler to PIO push
+	 */
+	pkt->handler = &usbhs_fifo_pio_push_handler;
+
+	return pkt->handler->prepare(pkt, is_done);
+}
+
+const struct usbhs_pkt_handle usbhs_dcp_data_stage_out_handler = {
+	.prepare = usbhsf_dcp_data_stage_try_push,
+};
+
+/*
+ *		DCP data stage (pop)
+ */
+static int usbhsf_dcp_data_stage_prepare_pop(struct usbhs_pkt *pkt,
+					     int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv);
+
+	if (usbhs_pipe_is_busy(pipe))
+		return 0;
+
+	/*
+	 * prepare pop for DCP should
+	 *  - change DCP direction,
+	 *  - clear fifo
+	 *  - DATA1
+	 */
+	usbhs_pipe_disable(pipe);
+
+	usbhs_pipe_sequence_data1(pipe); /* DATA1 */
+
+	usbhsf_fifo_select(pipe, fifo, 0);
+	usbhsf_fifo_clear(pipe, fifo);
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	/*
+	 * change handler to PIO pop
+	 */
+	pkt->handler = &usbhs_fifo_pio_pop_handler;
+
+	return pkt->handler->prepare(pkt, is_done);
+}
+
+const struct usbhs_pkt_handle usbhs_dcp_data_stage_in_handler = {
+	.prepare = usbhsf_dcp_data_stage_prepare_pop,
+};
+
+/*
+ *		PIO push handler
+ */
+static int usbhsf_pio_try_push(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */
+	void __iomem *addr = priv->base + fifo->port;
+	u8 *buf;
+	int maxp = usbhs_pipe_get_maxpacket(pipe);
+	int total_len;
+	int i, ret, len;
+	int is_short;
+
+	usbhs_pipe_data_sequence(pipe, pkt->sequence);
+	pkt->sequence = -1; /* -1 sequence will be ignored */
+
+	usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length);
+
+	ret = usbhsf_fifo_select(pipe, fifo, 1);
+	if (ret < 0)
+		return 0;
+
+	ret = usbhs_pipe_is_accessible(pipe);
+	if (ret < 0) {
+		/* inaccessible pipe is not an error */
+		ret = 0;
+		goto usbhs_fifo_write_busy;
+	}
+
+	ret = usbhsf_fifo_barrier(priv, fifo);
+	if (ret < 0)
+		goto usbhs_fifo_write_busy;
+
+	buf		= pkt->buf    + pkt->actual;
+	len		= pkt->length - pkt->actual;
+	len		= min(len, maxp);
+	total_len	= len;
+	is_short	= total_len < maxp;
+
+	/*
+	 * FIXME
+	 *
+	 * 32-bit access only
+	 */
+	if (len >= 4 && !((unsigned long)buf & 0x03)) {
+		iowrite32_rep(addr, buf, len / 4);
+		len %= 4;
+		buf += total_len - len;
+	}
+
+	/* the rest operation */
+	if (usbhs_get_dparam(priv, cfifo_byte_addr)) {
+		for (i = 0; i < len; i++)
+			iowrite8(buf[i], addr + (i & 0x03));
+	} else {
+		for (i = 0; i < len; i++)
+			iowrite8(buf[i], addr + (0x03 - (i & 0x03)));
+	}
+
+	/*
+	 * variable update
+	 */
+	pkt->actual += total_len;
+
+	if (pkt->actual < pkt->length)
+		*is_done = 0;		/* there are remainder data */
+	else if (is_short)
+		*is_done = 1;		/* short packet */
+	else
+		*is_done = !pkt->zero;	/* send zero packet ? */
+
+	/*
+	 * pipe/irq handling
+	 */
+	if (is_short)
+		usbhsf_send_terminator(pipe, fifo);
+
+	usbhsf_tx_irq_ctrl(pipe, !*is_done);
+	usbhs_pipe_running(pipe, !*is_done);
+	usbhs_pipe_enable(pipe);
+
+	dev_dbg(dev, "  send %d (%d/ %d/ %d/ %d)\n",
+		usbhs_pipe_number(pipe),
+		pkt->length, pkt->actual, *is_done, pkt->zero);
+
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	return 0;
+
+usbhs_fifo_write_busy:
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	/*
+	 * pipe is busy.
+	 * retry in interrupt
+	 */
+	usbhsf_tx_irq_ctrl(pipe, 1);
+	usbhs_pipe_running(pipe, 1);
+
+	return ret;
+}
+
+static int usbhsf_pio_prepare_push(struct usbhs_pkt *pkt, int *is_done)
+{
+	if (usbhs_pipe_is_running(pkt->pipe))
+		return 0;
+
+	return usbhsf_pio_try_push(pkt, is_done);
+}
+
+const struct usbhs_pkt_handle usbhs_fifo_pio_push_handler = {
+	.prepare = usbhsf_pio_prepare_push,
+	.try_run = usbhsf_pio_try_push,
+};
+
+/*
+ *		PIO pop handler
+ */
+static int usbhsf_prepare_pop(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv);
+
+	if (usbhs_pipe_is_busy(pipe))
+		return 0;
+
+	if (usbhs_pipe_is_running(pipe))
+		return 0;
+
+	/*
+	 * pipe enable to prepare packet receive
+	 */
+	usbhs_pipe_data_sequence(pipe, pkt->sequence);
+	pkt->sequence = -1; /* -1 sequence will be ignored */
+
+	if (usbhs_pipe_is_dcp(pipe))
+		usbhsf_fifo_clear(pipe, fifo);
+
+	usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length);
+	usbhs_pipe_enable(pipe);
+	usbhs_pipe_running(pipe, 1);
+	usbhsf_rx_irq_ctrl(pipe, 1);
+
+	return 0;
+}
+
+static int usbhsf_pio_try_pop(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */
+	void __iomem *addr = priv->base + fifo->port;
+	u8 *buf;
+	u32 data = 0;
+	int maxp = usbhs_pipe_get_maxpacket(pipe);
+	int rcv_len, len;
+	int i, ret;
+	int total_len = 0;
+
+	ret = usbhsf_fifo_select(pipe, fifo, 0);
+	if (ret < 0)
+		return 0;
+
+	ret = usbhsf_fifo_barrier(priv, fifo);
+	if (ret < 0)
+		goto usbhs_fifo_read_busy;
+
+	rcv_len = usbhsf_fifo_rcv_len(priv, fifo);
+
+	buf		= pkt->buf    + pkt->actual;
+	len		= pkt->length - pkt->actual;
+	len		= min(len, rcv_len);
+	total_len	= len;
+
+	/*
+	 * update actual length first here to decide disable pipe.
+	 * if this pipe keeps BUF status and all data were popped,
+	 * then, next interrupt/token will be issued again
+	 */
+	pkt->actual += total_len;
+
+	if ((pkt->actual == pkt->length) ||	/* receive all data */
+	    (total_len < maxp)) {		/* short packet */
+		*is_done = 1;
+		usbhsf_rx_irq_ctrl(pipe, 0);
+		usbhs_pipe_running(pipe, 0);
+		/*
+		 * If function mode, since this controller is possible to enter
+		 * Control Write status stage at this timing, this driver
+		 * should not disable the pipe. If such a case happens, this
+		 * controller is not able to complete the status stage.
+		 */
+		if (!usbhs_mod_is_host(priv) && !usbhs_pipe_is_dcp(pipe))
+			usbhs_pipe_disable(pipe);	/* disable pipe first */
+	}
+
+	/*
+	 * Buffer clear if Zero-Length packet
+	 *
+	 * see
+	 * "Operation" - "FIFO Buffer Memory" - "FIFO Port Function"
+	 */
+	if (0 == rcv_len) {
+		pkt->zero = 1;
+		usbhsf_fifo_clear(pipe, fifo);
+		goto usbhs_fifo_read_end;
+	}
+
+	/*
+	 * FIXME
+	 *
+	 * 32-bit access only
+	 */
+	if (len >= 4 && !((unsigned long)buf & 0x03)) {
+		ioread32_rep(addr, buf, len / 4);
+		len %= 4;
+		buf += total_len - len;
+	}
+
+	/* the rest operation */
+	for (i = 0; i < len; i++) {
+		if (!(i & 0x03))
+			data = ioread32(addr);
+
+		buf[i] = (data >> ((i & 0x03) * 8)) & 0xff;
+	}
+
+usbhs_fifo_read_end:
+	dev_dbg(dev, "  recv %d (%d/ %d/ %d/ %d)\n",
+		usbhs_pipe_number(pipe),
+		pkt->length, pkt->actual, *is_done, pkt->zero);
+
+usbhs_fifo_read_busy:
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	return ret;
+}
+
+const struct usbhs_pkt_handle usbhs_fifo_pio_pop_handler = {
+	.prepare = usbhsf_prepare_pop,
+	.try_run = usbhsf_pio_try_pop,
+};
+
+/*
+ *		DCP ctrol statge handler
+ */
+static int usbhsf_ctrl_stage_end(struct usbhs_pkt *pkt, int *is_done)
+{
+	usbhs_dcp_control_transfer_done(pkt->pipe);
+
+	*is_done = 1;
+
+	return 0;
+}
+
+const struct usbhs_pkt_handle usbhs_ctrl_stage_end_handler = {
+	.prepare = usbhsf_ctrl_stage_end,
+	.try_run = usbhsf_ctrl_stage_end,
+};
+
+/*
+ *		DMA fifo functions
+ */
+static struct dma_chan *usbhsf_dma_chan_get(struct usbhs_fifo *fifo,
+					    struct usbhs_pkt *pkt)
+{
+	if (&usbhs_fifo_dma_push_handler == pkt->handler)
+		return fifo->tx_chan;
+
+	if (&usbhs_fifo_dma_pop_handler == pkt->handler)
+		return fifo->rx_chan;
+
+	return NULL;
+}
+
+static struct usbhs_fifo *usbhsf_get_dma_fifo(struct usbhs_priv *priv,
+					      struct usbhs_pkt *pkt)
+{
+	struct usbhs_fifo *fifo;
+	int i;
+
+	usbhs_for_each_dfifo(priv, fifo, i) {
+		if (usbhsf_dma_chan_get(fifo, pkt) &&
+		    !usbhsf_fifo_is_busy(fifo))
+			return fifo;
+	}
+
+	return NULL;
+}
+
+#define usbhsf_dma_start(p, f)	__usbhsf_dma_ctrl(p, f, DREQE)
+#define usbhsf_dma_stop(p, f)	__usbhsf_dma_ctrl(p, f, 0)
+static void __usbhsf_dma_ctrl(struct usbhs_pipe *pipe,
+			      struct usbhs_fifo *fifo,
+			      u16 dreqe)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	usbhs_bset(priv, fifo->sel, DREQE, dreqe);
+}
+
+static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
+	struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe);
+	struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt);
+
+	return info->dma_map_ctrl(chan->device->dev, pkt, map);
+}
+
+static void usbhsf_dma_complete(void *arg,
+				const struct dmaengine_result *result);
+static void usbhsf_dma_xfer_preparing(struct usbhs_pkt *pkt)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_fifo *fifo;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *chan;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	enum dma_transfer_direction dir;
+	dma_cookie_t cookie;
+
+	fifo = usbhs_pipe_to_fifo(pipe);
+	if (!fifo)
+		return;
+
+	chan = usbhsf_dma_chan_get(fifo, pkt);
+	dir = usbhs_pipe_is_dir_in(pipe) ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
+
+	desc = dmaengine_prep_slave_single(chan, pkt->dma + pkt->actual,
+					pkt->trans, dir,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc)
+		return;
+
+	desc->callback_result	= usbhsf_dma_complete;
+	desc->callback_param	= pkt;
+
+	cookie = dmaengine_submit(desc);
+	if (cookie < 0) {
+		dev_err(dev, "Failed to submit dma descriptor\n");
+		return;
+	}
+
+	dev_dbg(dev, "  %s %d (%d/ %d)\n",
+		fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero);
+
+	usbhs_pipe_running(pipe, 1);
+	usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans);
+	dma_async_issue_pending(chan);
+	usbhsf_dma_start(pipe, fifo);
+	usbhs_pipe_enable(pipe);
+}
+
+static void xfer_work(struct work_struct *work)
+{
+	struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work);
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	unsigned long flags;
+
+	usbhs_lock(priv, flags);
+	usbhsf_dma_xfer_preparing(pkt);
+	usbhs_unlock(priv, flags);
+}
+
+/*
+ *		DMA push handler
+ */
+static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo;
+	int len = pkt->length - pkt->actual;
+	int ret;
+	uintptr_t align_mask;
+
+	if (usbhs_pipe_is_busy(pipe))
+		return 0;
+
+	/* use PIO if packet is less than pio_dma_border or pipe is DCP */
+	if ((len < usbhs_get_dparam(priv, pio_dma_border)) ||
+	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC))
+		goto usbhsf_pio_prepare_push;
+
+	/* check data length if this driver don't use USB-DMAC */
+	if (!usbhs_get_dparam(priv, has_usb_dmac) && len & 0x7)
+		goto usbhsf_pio_prepare_push;
+
+	/* check buffer alignment */
+	align_mask = usbhs_get_dparam(priv, has_usb_dmac) ?
+					USBHS_USB_DMAC_XFER_SIZE - 1 : 0x7;
+	if ((uintptr_t)(pkt->buf + pkt->actual) & align_mask)
+		goto usbhsf_pio_prepare_push;
+
+	/* return at this time if the pipe is running */
+	if (usbhs_pipe_is_running(pipe))
+		return 0;
+
+	/* get enable DMA fifo */
+	fifo = usbhsf_get_dma_fifo(priv, pkt);
+	if (!fifo)
+		goto usbhsf_pio_prepare_push;
+
+	ret = usbhsf_fifo_select(pipe, fifo, 0);
+	if (ret < 0)
+		goto usbhsf_pio_prepare_push;
+
+	if (usbhsf_dma_map(pkt) < 0)
+		goto usbhsf_pio_prepare_push_unselect;
+
+	pkt->trans = len;
+
+	usbhsf_tx_irq_ctrl(pipe, 0);
+	/* FIXME: Workaound for usb dmac that driver can be used in atomic */
+	if (usbhs_get_dparam(priv, has_usb_dmac)) {
+		usbhsf_dma_xfer_preparing(pkt);
+	} else {
+		INIT_WORK(&pkt->work, xfer_work);
+		schedule_work(&pkt->work);
+	}
+
+	return 0;
+
+usbhsf_pio_prepare_push_unselect:
+	usbhsf_fifo_unselect(pipe, fifo);
+usbhsf_pio_prepare_push:
+	/*
+	 * change handler to PIO
+	 */
+	pkt->handler = &usbhs_fifo_pio_push_handler;
+
+	return pkt->handler->prepare(pkt, is_done);
+}
+
+static int usbhsf_dma_push_done(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	int is_short = pkt->trans % usbhs_pipe_get_maxpacket(pipe);
+
+	pkt->actual += pkt->trans;
+
+	if (pkt->actual < pkt->length)
+		*is_done = 0;		/* there are remainder data */
+	else if (is_short)
+		*is_done = 1;		/* short packet */
+	else
+		*is_done = !pkt->zero;	/* send zero packet? */
+
+	usbhs_pipe_running(pipe, !*is_done);
+
+	usbhsf_dma_stop(pipe, pipe->fifo);
+	usbhsf_dma_unmap(pkt);
+	usbhsf_fifo_unselect(pipe, pipe->fifo);
+
+	if (!*is_done) {
+		/* change handler to PIO */
+		pkt->handler = &usbhs_fifo_pio_push_handler;
+		return pkt->handler->try_run(pkt, is_done);
+	}
+
+	return 0;
+}
+
+const struct usbhs_pkt_handle usbhs_fifo_dma_push_handler = {
+	.prepare	= usbhsf_dma_prepare_push,
+	.dma_done	= usbhsf_dma_push_done,
+};
+
+/*
+ *		DMA pop handler
+ */
+
+static int usbhsf_dma_prepare_pop_with_rx_irq(struct usbhs_pkt *pkt,
+					      int *is_done)
+{
+	return usbhsf_prepare_pop(pkt, is_done);
+}
+
+static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt,
+						int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo;
+	int ret;
+
+	if (usbhs_pipe_is_busy(pipe))
+		return 0;
+
+	/* use PIO if packet is less than pio_dma_border or pipe is DCP */
+	if ((pkt->length < usbhs_get_dparam(priv, pio_dma_border)) ||
+	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC))
+		goto usbhsf_pio_prepare_pop;
+
+	fifo = usbhsf_get_dma_fifo(priv, pkt);
+	if (!fifo)
+		goto usbhsf_pio_prepare_pop;
+
+	if ((uintptr_t)pkt->buf & (USBHS_USB_DMAC_XFER_SIZE - 1))
+		goto usbhsf_pio_prepare_pop;
+
+	/* return at this time if the pipe is running */
+	if (usbhs_pipe_is_running(pipe))
+		return 0;
+
+	usbhs_pipe_config_change_bfre(pipe, 1);
+
+	ret = usbhsf_fifo_select(pipe, fifo, 0);
+	if (ret < 0)
+		goto usbhsf_pio_prepare_pop;
+
+	if (usbhsf_dma_map(pkt) < 0)
+		goto usbhsf_pio_prepare_pop_unselect;
+
+	/* DMA */
+
+	/*
+	 * usbhs_fifo_dma_pop_handler :: prepare
+	 * enabled irq to come here.
+	 * but it is no longer needed for DMA. disable it.
+	 */
+	usbhsf_rx_irq_ctrl(pipe, 0);
+
+	pkt->trans = pkt->length;
+
+	usbhsf_dma_xfer_preparing(pkt);
+
+	return 0;
+
+usbhsf_pio_prepare_pop_unselect:
+	usbhsf_fifo_unselect(pipe, fifo);
+usbhsf_pio_prepare_pop:
+
+	/*
+	 * change handler to PIO
+	 */
+	pkt->handler = &usbhs_fifo_pio_pop_handler;
+	usbhs_pipe_config_change_bfre(pipe, 0);
+
+	return pkt->handler->prepare(pkt, is_done);
+}
+
+static int usbhsf_dma_prepare_pop(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe);
+
+	if (usbhs_get_dparam(priv, has_usb_dmac))
+		return usbhsf_dma_prepare_pop_with_usb_dmac(pkt, is_done);
+	else
+		return usbhsf_dma_prepare_pop_with_rx_irq(pkt, is_done);
+}
+
+static int usbhsf_dma_try_pop_with_rx_irq(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo;
+	int len, ret;
+
+	if (usbhs_pipe_is_busy(pipe))
+		return 0;
+
+	if (usbhs_pipe_is_dcp(pipe))
+		goto usbhsf_pio_prepare_pop;
+
+	/* get enable DMA fifo */
+	fifo = usbhsf_get_dma_fifo(priv, pkt);
+	if (!fifo)
+		goto usbhsf_pio_prepare_pop;
+
+	if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
+		goto usbhsf_pio_prepare_pop;
+
+	ret = usbhsf_fifo_select(pipe, fifo, 0);
+	if (ret < 0)
+		goto usbhsf_pio_prepare_pop;
+
+	/* use PIO if packet is less than pio_dma_border */
+	len = usbhsf_fifo_rcv_len(priv, fifo);
+	len = min(pkt->length - pkt->actual, len);
+	if (len & 0x7) /* 8byte alignment */
+		goto usbhsf_pio_prepare_pop_unselect;
+
+	if (len < usbhs_get_dparam(priv, pio_dma_border))
+		goto usbhsf_pio_prepare_pop_unselect;
+
+	ret = usbhsf_fifo_barrier(priv, fifo);
+	if (ret < 0)
+		goto usbhsf_pio_prepare_pop_unselect;
+
+	if (usbhsf_dma_map(pkt) < 0)
+		goto usbhsf_pio_prepare_pop_unselect;
+
+	/* DMA */
+
+	/*
+	 * usbhs_fifo_dma_pop_handler :: prepare
+	 * enabled irq to come here.
+	 * but it is no longer needed for DMA. disable it.
+	 */
+	usbhsf_rx_irq_ctrl(pipe, 0);
+
+	pkt->trans = len;
+
+	INIT_WORK(&pkt->work, xfer_work);
+	schedule_work(&pkt->work);
+
+	return 0;
+
+usbhsf_pio_prepare_pop_unselect:
+	usbhsf_fifo_unselect(pipe, fifo);
+usbhsf_pio_prepare_pop:
+
+	/*
+	 * change handler to PIO
+	 */
+	pkt->handler = &usbhs_fifo_pio_pop_handler;
+
+	return pkt->handler->try_run(pkt, is_done);
+}
+
+static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe);
+
+	BUG_ON(usbhs_get_dparam(priv, has_usb_dmac));
+
+	return usbhsf_dma_try_pop_with_rx_irq(pkt, is_done);
+}
+
+static int usbhsf_dma_pop_done_with_rx_irq(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	int maxp = usbhs_pipe_get_maxpacket(pipe);
+
+	usbhsf_dma_stop(pipe, pipe->fifo);
+	usbhsf_dma_unmap(pkt);
+	usbhsf_fifo_unselect(pipe, pipe->fifo);
+
+	pkt->actual += pkt->trans;
+
+	if ((pkt->actual == pkt->length) ||	/* receive all data */
+	    (pkt->trans < maxp)) {		/* short packet */
+		*is_done = 1;
+		usbhs_pipe_running(pipe, 0);
+	} else {
+		/* re-enable */
+		usbhs_pipe_running(pipe, 0);
+		usbhsf_prepare_pop(pkt, is_done);
+	}
+
+	return 0;
+}
+
+static size_t usbhs_dma_calc_received_size(struct usbhs_pkt *pkt,
+					   struct dma_chan *chan, int dtln)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	size_t received_size;
+	int maxp = usbhs_pipe_get_maxpacket(pipe);
+
+	received_size = pkt->length - pkt->dma_result->residue;
+
+	if (dtln) {
+		received_size -= USBHS_USB_DMAC_XFER_SIZE;
+		received_size &= ~(maxp - 1);
+		received_size += dtln;
+	}
+
+	return received_size;
+}
+
+static int usbhsf_dma_pop_done_with_usb_dmac(struct usbhs_pkt *pkt,
+					     int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe);
+	struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt);
+	int rcv_len;
+
+	/*
+	 * Since the driver disables rx_irq in DMA mode, the interrupt handler
+	 * cannot the BRDYSTS. So, the function clears it here because the
+	 * driver may use PIO mode next time.
+	 */
+	usbhs_xxxsts_clear(priv, BRDYSTS, usbhs_pipe_number(pipe));
+
+	rcv_len = usbhsf_fifo_rcv_len(priv, fifo);
+	usbhsf_fifo_clear(pipe, fifo);
+	pkt->actual = usbhs_dma_calc_received_size(pkt, chan, rcv_len);
+
+	usbhs_pipe_running(pipe, 0);
+	usbhsf_dma_stop(pipe, fifo);
+	usbhsf_dma_unmap(pkt);
+	usbhsf_fifo_unselect(pipe, pipe->fifo);
+
+	/* The driver can assume the rx transaction is always "done" */
+	*is_done = 1;
+
+	return 0;
+}
+
+static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe);
+
+	if (usbhs_get_dparam(priv, has_usb_dmac))
+		return usbhsf_dma_pop_done_with_usb_dmac(pkt, is_done);
+	else
+		return usbhsf_dma_pop_done_with_rx_irq(pkt, is_done);
+}
+
+const struct usbhs_pkt_handle usbhs_fifo_dma_pop_handler = {
+	.prepare	= usbhsf_dma_prepare_pop,
+	.try_run	= usbhsf_dma_try_pop,
+	.dma_done	= usbhsf_dma_pop_done
+};
+
+/*
+ *		DMA setting
+ */
+static bool usbhsf_dma_filter(struct dma_chan *chan, void *param)
+{
+	struct sh_dmae_slave *slave = param;
+
+	/*
+	 * FIXME
+	 *
+	 * usbhs doesn't recognize id = 0 as valid DMA
+	 */
+	if (0 == slave->shdma_slave.slave_id)
+		return false;
+
+	chan->private = slave;
+
+	return true;
+}
+
+static void usbhsf_dma_quit(struct usbhs_priv *priv, struct usbhs_fifo *fifo)
+{
+	if (fifo->tx_chan)
+		dma_release_channel(fifo->tx_chan);
+	if (fifo->rx_chan)
+		dma_release_channel(fifo->rx_chan);
+
+	fifo->tx_chan = NULL;
+	fifo->rx_chan = NULL;
+}
+
+static void usbhsf_dma_init_pdev(struct usbhs_fifo *fifo)
+{
+	dma_cap_mask_t mask;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	fifo->tx_chan = dma_request_channel(mask, usbhsf_dma_filter,
+					    &fifo->tx_slave);
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	fifo->rx_chan = dma_request_channel(mask, usbhsf_dma_filter,
+					    &fifo->rx_slave);
+}
+
+static void usbhsf_dma_init_dt(struct device *dev, struct usbhs_fifo *fifo,
+			       int channel)
+{
+	char name[16];
+
+	/*
+	 * To avoid complex handing for DnFIFOs, the driver uses each
+	 * DnFIFO as TX or RX direction (not bi-direction).
+	 * So, the driver uses odd channels for TX, even channels for RX.
+	 */
+	snprintf(name, sizeof(name), "ch%d", channel);
+	if (channel & 1) {
+		fifo->tx_chan = dma_request_chan(dev, name);
+		if (IS_ERR(fifo->tx_chan))
+			fifo->tx_chan = NULL;
+	} else {
+		fifo->rx_chan = dma_request_chan(dev, name);
+		if (IS_ERR(fifo->rx_chan))
+			fifo->rx_chan = NULL;
+	}
+}
+
+static void usbhsf_dma_init(struct usbhs_priv *priv, struct usbhs_fifo *fifo,
+			    int channel)
+{
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	if (dev_of_node(dev))
+		usbhsf_dma_init_dt(dev, fifo, channel);
+	else
+		usbhsf_dma_init_pdev(fifo);
+
+	if (fifo->tx_chan || fifo->rx_chan)
+		dev_dbg(dev, "enable DMAEngine (%s%s%s)\n",
+			 fifo->name,
+			 fifo->tx_chan ? "[TX]" : "    ",
+			 fifo->rx_chan ? "[RX]" : "    ");
+}
+
+/*
+ *		irq functions
+ */
+static int usbhsf_irq_empty(struct usbhs_priv *priv,
+			    struct usbhs_irq_state *irq_state)
+{
+	struct usbhs_pipe *pipe;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int i, ret;
+
+	if (!irq_state->bempsts) {
+		dev_err(dev, "debug %s !!\n", __func__);
+		return -EIO;
+	}
+
+	dev_dbg(dev, "irq empty [0x%04x]\n", irq_state->bempsts);
+
+	/*
+	 * search interrupted "pipe"
+	 * not "uep".
+	 */
+	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
+		if (!(irq_state->bempsts & (1 << i)))
+			continue;
+
+		ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_TRY_RUN);
+		if (ret < 0)
+			dev_err(dev, "irq_empty run_error %d : %d\n", i, ret);
+	}
+
+	return 0;
+}
+
+static int usbhsf_irq_ready(struct usbhs_priv *priv,
+			    struct usbhs_irq_state *irq_state)
+{
+	struct usbhs_pipe *pipe;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int i, ret;
+
+	if (!irq_state->brdysts) {
+		dev_err(dev, "debug %s !!\n", __func__);
+		return -EIO;
+	}
+
+	dev_dbg(dev, "irq ready [0x%04x]\n", irq_state->brdysts);
+
+	/*
+	 * search interrupted "pipe"
+	 * not "uep".
+	 */
+	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
+		if (!(irq_state->brdysts & (1 << i)))
+			continue;
+
+		ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_TRY_RUN);
+		if (ret < 0)
+			dev_err(dev, "irq_ready run_error %d : %d\n", i, ret);
+	}
+
+	return 0;
+}
+
+static void usbhsf_dma_complete(void *arg,
+				const struct dmaengine_result *result)
+{
+	struct usbhs_pkt *pkt = arg;
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int ret;
+
+	pkt->dma_result = result;
+	ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_DMA_DONE);
+	if (ret < 0)
+		dev_err(dev, "dma_complete run_error %d : %d\n",
+			usbhs_pipe_number(pipe), ret);
+}
+
+void usbhs_fifo_clear_dcp(struct usbhs_pipe *pipe)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */
+
+	/* clear DCP FIFO of transmission */
+	if (usbhsf_fifo_select(pipe, fifo, 1) < 0)
+		return;
+	usbhsf_fifo_clear(pipe, fifo);
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	/* clear DCP FIFO of reception */
+	if (usbhsf_fifo_select(pipe, fifo, 0) < 0)
+		return;
+	usbhsf_fifo_clear(pipe, fifo);
+	usbhsf_fifo_unselect(pipe, fifo);
+}
+
+/*
+ *		fifo init
+ */
+void usbhs_fifo_init(struct usbhs_priv *priv)
+{
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	struct usbhs_fifo *cfifo = usbhsf_get_cfifo(priv);
+	struct usbhs_fifo *dfifo;
+	int i;
+
+	mod->irq_empty		= usbhsf_irq_empty;
+	mod->irq_ready		= usbhsf_irq_ready;
+	mod->irq_bempsts	= 0;
+	mod->irq_brdysts	= 0;
+
+	cfifo->pipe	= NULL;
+	usbhs_for_each_dfifo(priv, dfifo, i)
+		dfifo->pipe	= NULL;
+}
+
+void usbhs_fifo_quit(struct usbhs_priv *priv)
+{
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+
+	mod->irq_empty		= NULL;
+	mod->irq_ready		= NULL;
+	mod->irq_bempsts	= 0;
+	mod->irq_brdysts	= 0;
+}
+
+#define __USBHS_DFIFO_INIT(priv, fifo, channel, fifo_port)		\
+do {									\
+	fifo = usbhsf_get_dnfifo(priv, channel);			\
+	fifo->name	= "D"#channel"FIFO";				\
+	fifo->port	= fifo_port;					\
+	fifo->sel	= D##channel##FIFOSEL;				\
+	fifo->ctr	= D##channel##FIFOCTR;				\
+	fifo->tx_slave.shdma_slave.slave_id =				\
+			usbhs_get_dparam(priv, d##channel##_tx_id);	\
+	fifo->rx_slave.shdma_slave.slave_id =				\
+			usbhs_get_dparam(priv, d##channel##_rx_id);	\
+	usbhsf_dma_init(priv, fifo, channel);				\
+} while (0)
+
+#define USBHS_DFIFO_INIT(priv, fifo, channel)				\
+		__USBHS_DFIFO_INIT(priv, fifo, channel, D##channel##FIFO)
+#define USBHS_DFIFO_INIT_NO_PORT(priv, fifo, channel)			\
+		__USBHS_DFIFO_INIT(priv, fifo, channel, 0)
+
+int usbhs_fifo_probe(struct usbhs_priv *priv)
+{
+	struct usbhs_fifo *fifo;
+
+	/* CFIFO */
+	fifo = usbhsf_get_cfifo(priv);
+	fifo->name	= "CFIFO";
+	fifo->port	= CFIFO;
+	fifo->sel	= CFIFOSEL;
+	fifo->ctr	= CFIFOCTR;
+
+	/* DFIFO */
+	USBHS_DFIFO_INIT(priv, fifo, 0);
+	USBHS_DFIFO_INIT(priv, fifo, 1);
+	USBHS_DFIFO_INIT_NO_PORT(priv, fifo, 2);
+	USBHS_DFIFO_INIT_NO_PORT(priv, fifo, 3);
+
+	return 0;
+}
+
+void usbhs_fifo_remove(struct usbhs_priv *priv)
+{
+	struct usbhs_fifo *fifo;
+	int i;
+
+	usbhs_for_each_dfifo(priv, fifo, i)
+		usbhsf_dma_quit(priv, fifo);
+}
diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h
new file mode 100644
index 000000000..039a2b993
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/fifo.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-1.0+ */
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#ifndef RENESAS_USB_FIFO_H
+#define RENESAS_USB_FIFO_H
+
+#include <linux/interrupt.h>
+#include <linux/sh_dma.h>
+#include <linux/workqueue.h>
+#include <asm/dma.h>
+#include "pipe.h"
+
+struct usbhs_fifo {
+	char *name;
+	u32 port;	/* xFIFO */
+	u32 sel;	/* xFIFOSEL */
+	u32 ctr;	/* xFIFOCTR */
+
+	struct usbhs_pipe	*pipe;
+
+	struct dma_chan		*tx_chan;
+	struct dma_chan		*rx_chan;
+
+	struct sh_dmae_slave	tx_slave;
+	struct sh_dmae_slave	rx_slave;
+};
+
+#define USBHS_MAX_NUM_DFIFO	4
+struct usbhs_fifo_info {
+	struct usbhs_fifo cfifo;
+	struct usbhs_fifo dfifo[USBHS_MAX_NUM_DFIFO];
+};
+#define usbhsf_get_dnfifo(p, n)	(&((p)->fifo_info.dfifo[n]))
+#define usbhs_for_each_dfifo(priv, dfifo, i)			\
+	for ((i) = 0;						\
+	     ((i) < USBHS_MAX_NUM_DFIFO) &&			\
+		     ((dfifo) = usbhsf_get_dnfifo(priv, (i)));	\
+	     (i)++)
+
+struct usbhs_pkt_handle;
+struct usbhs_pkt {
+	struct list_head node;
+	struct usbhs_pipe *pipe;
+	const struct usbhs_pkt_handle *handler;
+	void (*done)(struct usbhs_priv *priv,
+		     struct usbhs_pkt *pkt);
+	struct work_struct work;
+	dma_addr_t dma;
+	const struct dmaengine_result *dma_result;
+	void *buf;
+	int length;
+	int trans;
+	int actual;
+	int zero;
+	int sequence;
+};
+
+struct usbhs_pkt_handle {
+	int (*prepare)(struct usbhs_pkt *pkt, int *is_done);
+	int (*try_run)(struct usbhs_pkt *pkt, int *is_done);
+	int (*dma_done)(struct usbhs_pkt *pkt, int *is_done);
+};
+
+/*
+ * fifo
+ */
+int usbhs_fifo_probe(struct usbhs_priv *priv);
+void usbhs_fifo_remove(struct usbhs_priv *priv);
+void usbhs_fifo_init(struct usbhs_priv *priv);
+void usbhs_fifo_quit(struct usbhs_priv *priv);
+void usbhs_fifo_clear_dcp(struct usbhs_pipe *pipe);
+
+/*
+ * packet info
+ */
+extern const struct usbhs_pkt_handle usbhs_fifo_pio_push_handler;
+extern const struct usbhs_pkt_handle usbhs_fifo_pio_pop_handler;
+extern const struct usbhs_pkt_handle usbhs_ctrl_stage_end_handler;
+
+extern const struct usbhs_pkt_handle usbhs_fifo_dma_push_handler;
+extern const struct usbhs_pkt_handle usbhs_fifo_dma_pop_handler;
+
+extern const struct usbhs_pkt_handle usbhs_dcp_status_stage_in_handler;
+extern const struct usbhs_pkt_handle usbhs_dcp_status_stage_out_handler;
+
+extern const struct usbhs_pkt_handle usbhs_dcp_data_stage_in_handler;
+extern const struct usbhs_pkt_handle usbhs_dcp_data_stage_out_handler;
+
+void usbhs_pkt_init(struct usbhs_pkt *pkt);
+void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt,
+		    void (*done)(struct usbhs_priv *priv,
+				 struct usbhs_pkt *pkt),
+		    void *buf, int len, int zero, int sequence);
+struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt);
+void usbhs_pkt_start(struct usbhs_pipe *pipe);
+struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe);
+
+#endif /* RENESAS_USB_FIFO_H */
diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c
new file mode 100644
index 000000000..f2ea3e141
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/mod.c
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2019 Renesas Electronics Corporation
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#include <linux/interrupt.h>
+
+#include "common.h"
+#include "mod.h"
+
+/*
+ *		autonomy
+ *
+ * these functions are used if platform doesn't have external phy.
+ *  -> there is no "notify_hotplug" callback from platform
+ *  -> call "notify_hotplug" by itself
+ *  -> use own interrupt to connect/disconnect
+ *  -> it mean module clock is always ON
+ *             ~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+static int usbhsm_autonomy_get_vbus(struct platform_device *pdev)
+{
+	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
+
+	return  VBSTS & usbhs_read(priv, INTSTS0);
+}
+
+static int usbhsm_autonomy_irq_vbus(struct usbhs_priv *priv,
+				    struct usbhs_irq_state *irq_state)
+{
+	struct platform_device *pdev = usbhs_priv_to_pdev(priv);
+
+	usbhsc_schedule_notify_hotplug(pdev);
+
+	return 0;
+}
+
+void usbhs_mod_autonomy_mode(struct usbhs_priv *priv)
+{
+	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
+
+	info->irq_vbus = usbhsm_autonomy_irq_vbus;
+	info->get_vbus = usbhsm_autonomy_get_vbus;
+
+	usbhs_irq_callback_update(priv, NULL);
+}
+
+void usbhs_mod_non_autonomy_mode(struct usbhs_priv *priv)
+{
+	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
+
+	info->get_vbus = priv->pfunc->get_vbus;
+}
+
+/*
+ *		host / gadget functions
+ *
+ * renesas_usbhs host/gadget can register itself by below functions.
+ * these functions are called when probe
+ *
+ */
+void usbhs_mod_register(struct usbhs_priv *priv, struct usbhs_mod *mod, int id)
+{
+	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
+
+	info->mod[id]	= mod;
+	mod->priv	= priv;
+}
+
+struct usbhs_mod *usbhs_mod_get(struct usbhs_priv *priv, int id)
+{
+	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
+	struct usbhs_mod *ret = NULL;
+
+	switch (id) {
+	case USBHS_HOST:
+	case USBHS_GADGET:
+		ret = info->mod[id];
+		break;
+	}
+
+	return ret;
+}
+
+int usbhs_mod_is_host(struct usbhs_priv *priv)
+{
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
+
+	if (!mod)
+		return -EINVAL;
+
+	return info->mod[USBHS_HOST] == mod;
+}
+
+struct usbhs_mod *usbhs_mod_get_current(struct usbhs_priv *priv)
+{
+	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
+
+	return info->curt;
+}
+
+int usbhs_mod_change(struct usbhs_priv *priv, int id)
+{
+	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
+	struct usbhs_mod *mod = NULL;
+	int ret = 0;
+
+	/* id < 0 mean no current */
+	switch (id) {
+	case USBHS_HOST:
+	case USBHS_GADGET:
+		mod = info->mod[id];
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	info->curt = mod;
+
+	return ret;
+}
+
+static irqreturn_t usbhs_interrupt(int irq, void *data);
+int usbhs_mod_probe(struct usbhs_priv *priv)
+{
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int ret;
+
+	/*
+	 * install host/gadget driver
+	 */
+	ret = usbhs_mod_host_probe(priv);
+	if (ret < 0)
+		return ret;
+
+	ret = usbhs_mod_gadget_probe(priv);
+	if (ret < 0)
+		goto mod_init_host_err;
+
+	/* irq settings */
+	ret = devm_request_irq(dev, priv->irq, usbhs_interrupt,
+			       0, dev_name(dev), priv);
+	if (ret) {
+		dev_err(dev, "irq request err\n");
+		goto mod_init_gadget_err;
+	}
+
+	return ret;
+
+mod_init_gadget_err:
+	usbhs_mod_gadget_remove(priv);
+mod_init_host_err:
+	usbhs_mod_host_remove(priv);
+
+	return ret;
+}
+
+void usbhs_mod_remove(struct usbhs_priv *priv)
+{
+	usbhs_mod_host_remove(priv);
+	usbhs_mod_gadget_remove(priv);
+}
+
+/*
+ *		status functions
+ */
+int usbhs_status_get_device_state(struct usbhs_irq_state *irq_state)
+{
+	return (int)irq_state->intsts0 & DVSQ_MASK;
+}
+
+int usbhs_status_get_ctrl_stage(struct usbhs_irq_state *irq_state)
+{
+	/*
+	 * return value
+	 *
+	 * IDLE_SETUP_STAGE
+	 * READ_DATA_STAGE
+	 * READ_STATUS_STAGE
+	 * WRITE_DATA_STAGE
+	 * WRITE_STATUS_STAGE
+	 * NODATA_STATUS_STAGE
+	 * SEQUENCE_ERROR
+	 */
+	return (int)irq_state->intsts0 & CTSQ_MASK;
+}
+
+static int usbhs_status_get_each_irq(struct usbhs_priv *priv,
+				     struct usbhs_irq_state *state)
+{
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	u16 intenb0, intenb1;
+	unsigned long flags;
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+	state->intsts0 = usbhs_read(priv, INTSTS0);
+	intenb0 = usbhs_read(priv, INTENB0);
+
+	if (usbhs_mod_is_host(priv)) {
+		state->intsts1 = usbhs_read(priv, INTSTS1);
+		intenb1 = usbhs_read(priv, INTENB1);
+	} else {
+		state->intsts1 = intenb1 = 0;
+	}
+
+	/* mask */
+	if (mod) {
+		state->brdysts = usbhs_read(priv, BRDYSTS);
+		state->nrdysts = usbhs_read(priv, NRDYSTS);
+		state->bempsts = usbhs_read(priv, BEMPSTS);
+
+		state->bempsts &= mod->irq_bempsts;
+		state->brdysts &= mod->irq_brdysts;
+	}
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+
+	return 0;
+}
+
+/*
+ *		interrupt
+ */
+#define INTSTS0_MAGIC 0xF800 /* acknowledge magical interrupt sources */
+#define INTSTS1_MAGIC 0xA870 /* acknowledge magical interrupt sources */
+static irqreturn_t usbhs_interrupt(int irq, void *data)
+{
+	struct usbhs_priv *priv = data;
+	struct usbhs_irq_state irq_state;
+
+	if (usbhs_status_get_each_irq(priv, &irq_state) < 0)
+		return IRQ_NONE;
+
+	/*
+	 * clear interrupt
+	 *
+	 * The hardware is _very_ picky to clear interrupt bit.
+	 * Especially INTSTS0_MAGIC, INTSTS1_MAGIC value.
+	 *
+	 * see
+	 *	"Operation"
+	 *	 - "Control Transfer (DCP)"
+	 *	   - Function :: VALID bit should 0
+	 */
+	usbhs_write(priv, INTSTS0, ~irq_state.intsts0 & INTSTS0_MAGIC);
+	if (usbhs_mod_is_host(priv))
+		usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC);
+
+	/*
+	 * The driver should not clear the xxxSTS after the line of
+	 * "call irq callback functions" because each "if" statement is
+	 * possible to call the callback function for avoiding any side effects.
+	 */
+	if (irq_state.intsts0 & BRDY)
+		usbhs_write(priv, BRDYSTS, ~irq_state.brdysts);
+	usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts);
+	if (irq_state.intsts0 & BEMP)
+		usbhs_write(priv, BEMPSTS, ~irq_state.bempsts);
+
+	/*
+	 * call irq callback functions
+	 * see also
+	 *	usbhs_irq_setting_update
+	 */
+
+	/* INTSTS0 */
+	if (irq_state.intsts0 & VBINT)
+		usbhs_mod_info_call(priv, irq_vbus, priv, &irq_state);
+
+	if (irq_state.intsts0 & DVST)
+		usbhs_mod_call(priv, irq_dev_state, priv, &irq_state);
+
+	if (irq_state.intsts0 & CTRT)
+		usbhs_mod_call(priv, irq_ctrl_stage, priv, &irq_state);
+
+	if (irq_state.intsts0 & BEMP)
+		usbhs_mod_call(priv, irq_empty, priv, &irq_state);
+
+	if (irq_state.intsts0 & BRDY)
+		usbhs_mod_call(priv, irq_ready, priv, &irq_state);
+
+	if (usbhs_mod_is_host(priv)) {
+		/* INTSTS1 */
+		if (irq_state.intsts1 & ATTCH)
+			usbhs_mod_call(priv, irq_attch, priv, &irq_state);
+
+		if (irq_state.intsts1 & DTCH)
+			usbhs_mod_call(priv, irq_dtch, priv, &irq_state);
+
+		if (irq_state.intsts1 & SIGN)
+			usbhs_mod_call(priv, irq_sign, priv, &irq_state);
+
+		if (irq_state.intsts1 & SACK)
+			usbhs_mod_call(priv, irq_sack, priv, &irq_state);
+	}
+	return IRQ_HANDLED;
+}
+
+void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod)
+{
+	u16 intenb0 = 0;
+	u16 intenb1 = 0;
+	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
+
+	/*
+	 * BEMPENB/BRDYENB are picky.
+	 * below method is required
+	 *
+	 *  - clear  INTSTS0
+	 *  - update BEMPENB/BRDYENB
+	 *  - update INTSTS0
+	 */
+	usbhs_write(priv, INTENB0, 0);
+	if (usbhs_mod_is_host(priv))
+		usbhs_write(priv, INTENB1, 0);
+
+	usbhs_write(priv, BEMPENB, 0);
+	usbhs_write(priv, BRDYENB, 0);
+
+	/*
+	 * see also
+	 *	usbhs_interrupt
+	 */
+
+	if (info->irq_vbus)
+		intenb0 |= VBSE;
+
+	if (mod) {
+		/*
+		 * INTSTS0
+		 */
+		if (mod->irq_ctrl_stage)
+			intenb0 |= CTRE;
+
+		if (mod->irq_dev_state)
+			intenb0 |= DVSE;
+
+		if (mod->irq_empty && mod->irq_bempsts) {
+			usbhs_write(priv, BEMPENB, mod->irq_bempsts);
+			intenb0 |= BEMPE;
+		}
+
+		if (mod->irq_ready && mod->irq_brdysts) {
+			usbhs_write(priv, BRDYENB, mod->irq_brdysts);
+			intenb0 |= BRDYE;
+		}
+
+		if (usbhs_mod_is_host(priv)) {
+			/*
+			 * INTSTS1
+			 */
+			if (mod->irq_attch)
+				intenb1 |= ATTCHE;
+
+			if (mod->irq_dtch)
+				intenb1 |= DTCHE;
+
+			if (mod->irq_sign)
+				intenb1 |= SIGNE;
+
+			if (mod->irq_sack)
+				intenb1 |= SACKE;
+		}
+	}
+
+	if (intenb0)
+		usbhs_write(priv, INTENB0, intenb0);
+
+	if (usbhs_mod_is_host(priv) && intenb1)
+		usbhs_write(priv, INTENB1, intenb1);
+}
diff --git a/drivers/usb/renesas_usbhs/mod.h b/drivers/usb/renesas_usbhs/mod.h
new file mode 100644
index 000000000..56b7106d2
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/mod.h
@@ -0,0 +1,179 @@
+/* SPDX-License-Identifier: GPL-1.0+ */
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2019 Renesas Electronics Corporation
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#ifndef RENESAS_USB_MOD_H
+#define RENESAS_USB_MOD_H
+
+#include <linux/spinlock.h>
+#include <linux/usb/renesas_usbhs.h>
+#include "common.h"
+
+/*
+ *	struct
+ */
+struct usbhs_irq_state {
+	u16 intsts0;
+	u16 intsts1;
+	u16 brdysts;
+	u16 nrdysts;
+	u16 bempsts;
+};
+
+struct usbhs_mod {
+	char *name;
+
+	/*
+	 * entry point from common.c
+	 */
+	int (*start)(struct usbhs_priv *priv);
+	int (*stop)(struct usbhs_priv *priv);
+
+	/*
+	 * INTSTS0
+	 */
+
+	/* DVST (DVSQ) */
+	int (*irq_dev_state)(struct usbhs_priv *priv,
+			     struct usbhs_irq_state *irq_state);
+
+	/* CTRT (CTSQ) */
+	int (*irq_ctrl_stage)(struct usbhs_priv *priv,
+			      struct usbhs_irq_state *irq_state);
+
+	/* BEMP / BEMPSTS */
+	int (*irq_empty)(struct usbhs_priv *priv,
+			 struct usbhs_irq_state *irq_state);
+	u16 irq_bempsts;
+
+	/* BRDY / BRDYSTS */
+	int (*irq_ready)(struct usbhs_priv *priv,
+			 struct usbhs_irq_state *irq_state);
+	u16 irq_brdysts;
+
+	/*
+	 * INTSTS1
+	 */
+
+	/* ATTCHE */
+	int (*irq_attch)(struct usbhs_priv *priv,
+			 struct usbhs_irq_state *irq_state);
+
+	/* DTCHE */
+	int (*irq_dtch)(struct usbhs_priv *priv,
+			struct usbhs_irq_state *irq_state);
+
+	/* SIGN */
+	int (*irq_sign)(struct usbhs_priv *priv,
+			struct usbhs_irq_state *irq_state);
+
+	/* SACK */
+	int (*irq_sack)(struct usbhs_priv *priv,
+			struct usbhs_irq_state *irq_state);
+
+	struct usbhs_priv *priv;
+};
+
+struct usbhs_mod_info {
+	struct usbhs_mod *mod[USBHS_MAX];
+	struct usbhs_mod *curt; /* current mod */
+
+	/*
+	 * INTSTS0 :: VBINT
+	 *
+	 * This function will be used as autonomy mode (runtime_pwctrl == 0)
+	 * when the platform doesn't have own get_vbus function.
+	 *
+	 * This callback cannot be member of "struct usbhs_mod" because it
+	 * will be used even though host/gadget has not been selected.
+	 */
+	int (*irq_vbus)(struct usbhs_priv *priv,
+			struct usbhs_irq_state *irq_state);
+
+	/*
+	 * This function will be used on any gadget mode. To simplify the code,
+	 * this member is in here.
+	 */
+	int (*get_vbus)(struct platform_device *pdev);
+};
+
+/*
+ *		for host/gadget module
+ */
+struct usbhs_mod *usbhs_mod_get(struct usbhs_priv *priv, int id);
+struct usbhs_mod *usbhs_mod_get_current(struct usbhs_priv *priv);
+void usbhs_mod_register(struct usbhs_priv *priv, struct usbhs_mod *usb, int id);
+int usbhs_mod_is_host(struct usbhs_priv *priv);
+int usbhs_mod_change(struct usbhs_priv *priv, int id);
+int usbhs_mod_probe(struct usbhs_priv *priv);
+void usbhs_mod_remove(struct usbhs_priv *priv);
+
+void usbhs_mod_autonomy_mode(struct usbhs_priv *priv);
+void usbhs_mod_non_autonomy_mode(struct usbhs_priv *priv);
+
+/*
+ *		status functions
+ */
+int usbhs_status_get_device_state(struct usbhs_irq_state *irq_state);
+int usbhs_status_get_ctrl_stage(struct usbhs_irq_state *irq_state);
+
+/*
+ *		callback functions
+ */
+void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod);
+
+
+#define usbhs_mod_call(priv, func, param...)		\
+	({						\
+		struct usbhs_mod *mod;			\
+		mod = usbhs_mod_get_current(priv);	\
+		!mod		? -ENODEV :		\
+		!mod->func	? 0 :			\
+		 mod->func(param);			\
+	})
+
+#define usbhs_priv_to_modinfo(priv) (&priv->mod_info)
+#define usbhs_mod_info_call(priv, func, param...)	\
+({							\
+	struct usbhs_mod_info *info;			\
+	info = usbhs_priv_to_modinfo(priv);		\
+	!info->func ? 0 :				\
+	 info->func(param);				\
+})
+
+/*
+ * host / gadget control
+ */
+#if	defined(CONFIG_USB_RENESAS_USBHS_HCD) || \
+	defined(CONFIG_USB_RENESAS_USBHS_HCD_MODULE)
+extern int usbhs_mod_host_probe(struct usbhs_priv *priv);
+extern int usbhs_mod_host_remove(struct usbhs_priv *priv);
+#else
+static inline int usbhs_mod_host_probe(struct usbhs_priv *priv)
+{
+	return 0;
+}
+static inline void usbhs_mod_host_remove(struct usbhs_priv *priv)
+{
+}
+#endif
+
+#if	defined(CONFIG_USB_RENESAS_USBHS_UDC) || \
+	defined(CONFIG_USB_RENESAS_USBHS_UDC_MODULE)
+extern int usbhs_mod_gadget_probe(struct usbhs_priv *priv);
+extern void usbhs_mod_gadget_remove(struct usbhs_priv *priv);
+#else
+static inline int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
+{
+	return 0;
+}
+static inline void usbhs_mod_gadget_remove(struct usbhs_priv *priv)
+{
+}
+#endif
+
+#endif /* RENESAS_USB_MOD_H */
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
new file mode 100644
index 000000000..105132ae8
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -0,0 +1,1194 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2019 Renesas Electronics Corporation
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include "common.h"
+
+/*
+ *		struct
+ */
+struct usbhsg_request {
+	struct usb_request	req;
+	struct usbhs_pkt	pkt;
+};
+
+#define EP_NAME_SIZE 8
+struct usbhsg_gpriv;
+struct usbhsg_uep {
+	struct usb_ep		 ep;
+	struct usbhs_pipe	*pipe;
+	spinlock_t		lock;	/* protect the pipe */
+
+	char ep_name[EP_NAME_SIZE];
+
+	struct usbhsg_gpriv *gpriv;
+};
+
+struct usbhsg_gpriv {
+	struct usb_gadget	 gadget;
+	struct usbhs_mod	 mod;
+
+	struct usbhsg_uep	*uep;
+	int			 uep_size;
+
+	struct usb_gadget_driver	*driver;
+	struct usb_phy		*transceiver;
+	bool			 vbus_active;
+
+	u32	status;
+#define USBHSG_STATUS_STARTED		(1 << 0)
+#define USBHSG_STATUS_REGISTERD		(1 << 1)
+#define USBHSG_STATUS_WEDGE		(1 << 2)
+#define USBHSG_STATUS_SELF_POWERED	(1 << 3)
+#define USBHSG_STATUS_SOFT_CONNECT	(1 << 4)
+};
+
+struct usbhsg_recip_handle {
+	char *name;
+	int (*device)(struct usbhs_priv *priv, struct usbhsg_uep *uep,
+		      struct usb_ctrlrequest *ctrl);
+	int (*interface)(struct usbhs_priv *priv, struct usbhsg_uep *uep,
+			 struct usb_ctrlrequest *ctrl);
+	int (*endpoint)(struct usbhs_priv *priv, struct usbhsg_uep *uep,
+			struct usb_ctrlrequest *ctrl);
+};
+
+/*
+ *		macro
+ */
+#define usbhsg_priv_to_gpriv(priv)			\
+	container_of(					\
+		usbhs_mod_get(priv, USBHS_GADGET),	\
+		struct usbhsg_gpriv, mod)
+
+#define __usbhsg_for_each_uep(start, pos, g, i)	\
+	for ((i) = start;					\
+	     ((i) < (g)->uep_size) && ((pos) = (g)->uep + (i));	\
+	     (i)++)
+
+#define usbhsg_for_each_uep(pos, gpriv, i)	\
+	__usbhsg_for_each_uep(1, pos, gpriv, i)
+
+#define usbhsg_for_each_uep_with_dcp(pos, gpriv, i)	\
+	__usbhsg_for_each_uep(0, pos, gpriv, i)
+
+#define usbhsg_gadget_to_gpriv(g)\
+	container_of(g, struct usbhsg_gpriv, gadget)
+
+#define usbhsg_req_to_ureq(r)\
+	container_of(r, struct usbhsg_request, req)
+
+#define usbhsg_ep_to_uep(e)		container_of(e, struct usbhsg_uep, ep)
+#define usbhsg_gpriv_to_dev(gp)		usbhs_priv_to_dev((gp)->mod.priv)
+#define usbhsg_gpriv_to_priv(gp)	((gp)->mod.priv)
+#define usbhsg_gpriv_to_dcp(gp)		((gp)->uep)
+#define usbhsg_gpriv_to_nth_uep(gp, i)	((gp)->uep + i)
+#define usbhsg_uep_to_gpriv(u)		((u)->gpriv)
+#define usbhsg_uep_to_pipe(u)		((u)->pipe)
+#define usbhsg_pipe_to_uep(p)		((p)->mod_private)
+#define usbhsg_is_dcp(u)		((u) == usbhsg_gpriv_to_dcp((u)->gpriv))
+
+#define usbhsg_ureq_to_pkt(u)		(&(u)->pkt)
+#define usbhsg_pkt_to_ureq(i)	\
+	container_of(i, struct usbhsg_request, pkt)
+
+#define usbhsg_is_not_connected(gp) ((gp)->gadget.speed == USB_SPEED_UNKNOWN)
+
+/* status */
+#define usbhsg_status_init(gp)   do {(gp)->status = 0; } while (0)
+#define usbhsg_status_set(gp, b) (gp->status |=  b)
+#define usbhsg_status_clr(gp, b) (gp->status &= ~b)
+#define usbhsg_status_has(gp, b) (gp->status &   b)
+
+/*
+ *		queue push/pop
+ */
+static void __usbhsg_queue_pop(struct usbhsg_uep *uep,
+			       struct usbhsg_request *ureq,
+			       int status)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+
+	if (pipe)
+		dev_dbg(dev, "pipe %d : queue pop\n", usbhs_pipe_number(pipe));
+
+	ureq->req.status = status;
+	spin_unlock(usbhs_priv_to_lock(priv));
+	usb_gadget_giveback_request(&uep->ep, &ureq->req);
+	spin_lock(usbhs_priv_to_lock(priv));
+}
+
+static void usbhsg_queue_pop(struct usbhsg_uep *uep,
+			     struct usbhsg_request *ureq,
+			     int status)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+	unsigned long flags;
+
+	usbhs_lock(priv, flags);
+	__usbhsg_queue_pop(uep, ureq, status);
+	usbhs_unlock(priv, flags);
+}
+
+static void usbhsg_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhsg_uep *uep = usbhsg_pipe_to_uep(pipe);
+	struct usbhsg_request *ureq = usbhsg_pkt_to_ureq(pkt);
+	unsigned long flags;
+
+	ureq->req.actual = pkt->actual;
+
+	usbhs_lock(priv, flags);
+	if (uep)
+		__usbhsg_queue_pop(uep, ureq, 0);
+	usbhs_unlock(priv, flags);
+}
+
+static void usbhsg_queue_push(struct usbhsg_uep *uep,
+			      struct usbhsg_request *ureq)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+	struct usbhs_pkt *pkt = usbhsg_ureq_to_pkt(ureq);
+	struct usb_request *req = &ureq->req;
+
+	req->actual = 0;
+	req->status = -EINPROGRESS;
+	usbhs_pkt_push(pipe, pkt, usbhsg_queue_done,
+		       req->buf, req->length, req->zero, -1);
+	usbhs_pkt_start(pipe);
+
+	dev_dbg(dev, "pipe %d : queue push (%d)\n",
+		usbhs_pipe_number(pipe),
+		req->length);
+}
+
+/*
+ *		dma map/unmap
+ */
+static int usbhsg_dma_map_ctrl(struct device *dma_dev, struct usbhs_pkt *pkt,
+			       int map)
+{
+	struct usbhsg_request *ureq = usbhsg_pkt_to_ureq(pkt);
+	struct usb_request *req = &ureq->req;
+	struct usbhs_pipe *pipe = pkt->pipe;
+	enum dma_data_direction dir;
+	int ret = 0;
+
+	dir = usbhs_pipe_is_dir_host(pipe);
+
+	if (map) {
+		/* it can not use scatter/gather */
+		WARN_ON(req->num_sgs);
+
+		ret = usb_gadget_map_request_by_dev(dma_dev, req, dir);
+		if (ret < 0)
+			return ret;
+
+		pkt->dma = req->dma;
+	} else {
+		usb_gadget_unmap_request_by_dev(dma_dev, req, dir);
+	}
+
+	return ret;
+}
+
+/*
+ *		USB_TYPE_STANDARD / clear feature functions
+ */
+static int usbhsg_recip_handler_std_control_done(struct usbhs_priv *priv,
+						 struct usbhsg_uep *uep,
+						 struct usb_ctrlrequest *ctrl)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+	struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(dcp);
+
+	usbhs_dcp_control_transfer_done(pipe);
+
+	return 0;
+}
+
+static int usbhsg_recip_handler_std_clear_endpoint(struct usbhs_priv *priv,
+						   struct usbhsg_uep *uep,
+						   struct usb_ctrlrequest *ctrl)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+
+	if (!usbhsg_status_has(gpriv, USBHSG_STATUS_WEDGE)) {
+		usbhs_pipe_disable(pipe);
+		usbhs_pipe_sequence_data0(pipe);
+		usbhs_pipe_enable(pipe);
+	}
+
+	usbhsg_recip_handler_std_control_done(priv, uep, ctrl);
+
+	usbhs_pkt_start(pipe);
+
+	return 0;
+}
+
+static struct usbhsg_recip_handle req_clear_feature = {
+	.name		= "clear feature",
+	.device		= usbhsg_recip_handler_std_control_done,
+	.interface	= usbhsg_recip_handler_std_control_done,
+	.endpoint	= usbhsg_recip_handler_std_clear_endpoint,
+};
+
+/*
+ *		USB_TYPE_STANDARD / set feature functions
+ */
+static int usbhsg_recip_handler_std_set_device(struct usbhs_priv *priv,
+						 struct usbhsg_uep *uep,
+						 struct usb_ctrlrequest *ctrl)
+{
+	switch (le16_to_cpu(ctrl->wValue)) {
+	case USB_DEVICE_TEST_MODE:
+		usbhsg_recip_handler_std_control_done(priv, uep, ctrl);
+		udelay(100);
+		usbhs_sys_set_test_mode(priv, le16_to_cpu(ctrl->wIndex) >> 8);
+		break;
+	default:
+		usbhsg_recip_handler_std_control_done(priv, uep, ctrl);
+		break;
+	}
+
+	return 0;
+}
+
+static int usbhsg_recip_handler_std_set_endpoint(struct usbhs_priv *priv,
+						 struct usbhsg_uep *uep,
+						 struct usb_ctrlrequest *ctrl)
+{
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+
+	usbhs_pipe_stall(pipe);
+
+	usbhsg_recip_handler_std_control_done(priv, uep, ctrl);
+
+	return 0;
+}
+
+static struct usbhsg_recip_handle req_set_feature = {
+	.name		= "set feature",
+	.device		= usbhsg_recip_handler_std_set_device,
+	.interface	= usbhsg_recip_handler_std_control_done,
+	.endpoint	= usbhsg_recip_handler_std_set_endpoint,
+};
+
+/*
+ *		USB_TYPE_STANDARD / get status functions
+ */
+static void __usbhsg_recip_send_complete(struct usb_ep *ep,
+					 struct usb_request *req)
+{
+	struct usbhsg_request *ureq = usbhsg_req_to_ureq(req);
+
+	/* free allocated recip-buffer/usb_request */
+	kfree(ureq->pkt.buf);
+	usb_ep_free_request(ep, req);
+}
+
+static void __usbhsg_recip_send_status(struct usbhsg_gpriv *gpriv,
+				       unsigned short status)
+{
+	struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(dcp);
+	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	struct usb_request *req;
+	__le16 *buf;
+
+	/* alloc new usb_request for recip */
+	req = usb_ep_alloc_request(&dcp->ep, GFP_ATOMIC);
+	if (!req) {
+		dev_err(dev, "recip request allocation fail\n");
+		return;
+	}
+
+	/* alloc recip data buffer */
+	buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
+	if (!buf) {
+		usb_ep_free_request(&dcp->ep, req);
+		return;
+	}
+
+	/* recip data is status */
+	*buf = cpu_to_le16(status);
+
+	/* allocated usb_request/buffer will be freed */
+	req->complete	= __usbhsg_recip_send_complete;
+	req->buf	= buf;
+	req->length	= sizeof(*buf);
+	req->zero	= 0;
+
+	/* push packet */
+	pipe->handler = &usbhs_fifo_pio_push_handler;
+	usbhsg_queue_push(dcp, usbhsg_req_to_ureq(req));
+}
+
+static int usbhsg_recip_handler_std_get_device(struct usbhs_priv *priv,
+					       struct usbhsg_uep *uep,
+					       struct usb_ctrlrequest *ctrl)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	unsigned short status = 0;
+
+	if (usbhsg_status_has(gpriv, USBHSG_STATUS_SELF_POWERED))
+		status = 1 << USB_DEVICE_SELF_POWERED;
+
+	__usbhsg_recip_send_status(gpriv, status);
+
+	return 0;
+}
+
+static int usbhsg_recip_handler_std_get_interface(struct usbhs_priv *priv,
+						  struct usbhsg_uep *uep,
+						  struct usb_ctrlrequest *ctrl)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	unsigned short status = 0;
+
+	__usbhsg_recip_send_status(gpriv, status);
+
+	return 0;
+}
+
+static int usbhsg_recip_handler_std_get_endpoint(struct usbhs_priv *priv,
+						 struct usbhsg_uep *uep,
+						 struct usb_ctrlrequest *ctrl)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+	unsigned short status = 0;
+
+	if (usbhs_pipe_is_stall(pipe))
+		status = 1 << USB_ENDPOINT_HALT;
+
+	__usbhsg_recip_send_status(gpriv, status);
+
+	return 0;
+}
+
+static struct usbhsg_recip_handle req_get_status = {
+	.name		= "get status",
+	.device		= usbhsg_recip_handler_std_get_device,
+	.interface	= usbhsg_recip_handler_std_get_interface,
+	.endpoint	= usbhsg_recip_handler_std_get_endpoint,
+};
+
+/*
+ *		USB_TYPE handler
+ */
+static int usbhsg_recip_run_handle(struct usbhs_priv *priv,
+				   struct usbhsg_recip_handle *handler,
+				   struct usb_ctrlrequest *ctrl)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	struct usbhsg_uep *uep;
+	struct usbhs_pipe *pipe;
+	int recip = ctrl->bRequestType & USB_RECIP_MASK;
+	int nth = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK;
+	int ret = 0;
+	int (*func)(struct usbhs_priv *priv, struct usbhsg_uep *uep,
+		    struct usb_ctrlrequest *ctrl);
+	char *msg;
+
+	uep = usbhsg_gpriv_to_nth_uep(gpriv, nth);
+	pipe = usbhsg_uep_to_pipe(uep);
+	if (!pipe) {
+		dev_err(dev, "wrong recip request\n");
+		return -EINVAL;
+	}
+
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		msg	= "DEVICE";
+		func	= handler->device;
+		break;
+	case USB_RECIP_INTERFACE:
+		msg	= "INTERFACE";
+		func	= handler->interface;
+		break;
+	case USB_RECIP_ENDPOINT:
+		msg	= "ENDPOINT";
+		func	= handler->endpoint;
+		break;
+	default:
+		dev_warn(dev, "unsupported RECIP(%d)\n", recip);
+		func = NULL;
+		ret = -EINVAL;
+	}
+
+	if (func) {
+		dev_dbg(dev, "%s (pipe %d :%s)\n", handler->name, nth, msg);
+		ret = func(priv, uep, ctrl);
+	}
+
+	return ret;
+}
+
+/*
+ *		irq functions
+ *
+ * it will be called from usbhs_interrupt
+ */
+static int usbhsg_irq_dev_state(struct usbhs_priv *priv,
+				struct usbhs_irq_state *irq_state)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	int state = usbhs_status_get_device_state(irq_state);
+
+	gpriv->gadget.speed = usbhs_bus_get_speed(priv);
+
+	dev_dbg(dev, "state = %x : speed : %d\n", state, gpriv->gadget.speed);
+
+	if (gpriv->gadget.speed != USB_SPEED_UNKNOWN &&
+	    (state & SUSPENDED_STATE)) {
+		if (gpriv->driver && gpriv->driver->suspend)
+			gpriv->driver->suspend(&gpriv->gadget);
+		usb_gadget_set_state(&gpriv->gadget, USB_STATE_SUSPENDED);
+	}
+
+	return 0;
+}
+
+static int usbhsg_irq_ctrl_stage(struct usbhs_priv *priv,
+				 struct usbhs_irq_state *irq_state)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+	struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(dcp);
+	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	struct usb_ctrlrequest ctrl;
+	struct usbhsg_recip_handle *recip_handler = NULL;
+	int stage = usbhs_status_get_ctrl_stage(irq_state);
+	int ret = 0;
+
+	dev_dbg(dev, "stage = %d\n", stage);
+
+	/*
+	 * see Manual
+	 *
+	 *  "Operation"
+	 *  - "Interrupt Function"
+	 *    - "Control Transfer Stage Transition Interrupt"
+	 *      - Fig. "Control Transfer Stage Transitions"
+	 */
+
+	switch (stage) {
+	case READ_DATA_STAGE:
+		pipe->handler = &usbhs_fifo_pio_push_handler;
+		break;
+	case WRITE_DATA_STAGE:
+		pipe->handler = &usbhs_fifo_pio_pop_handler;
+		break;
+	case NODATA_STATUS_STAGE:
+		pipe->handler = &usbhs_ctrl_stage_end_handler;
+		break;
+	case READ_STATUS_STAGE:
+	case WRITE_STATUS_STAGE:
+		usbhs_dcp_control_transfer_done(pipe);
+		fallthrough;
+	default:
+		return ret;
+	}
+
+	/*
+	 * get usb request
+	 */
+	usbhs_usbreq_get_val(priv, &ctrl);
+
+	switch (ctrl.bRequestType & USB_TYPE_MASK) {
+	case USB_TYPE_STANDARD:
+		switch (ctrl.bRequest) {
+		case USB_REQ_CLEAR_FEATURE:
+			recip_handler = &req_clear_feature;
+			break;
+		case USB_REQ_SET_FEATURE:
+			recip_handler = &req_set_feature;
+			break;
+		case USB_REQ_GET_STATUS:
+			recip_handler = &req_get_status;
+			break;
+		}
+	}
+
+	/*
+	 * setup stage / run recip
+	 */
+	if (recip_handler)
+		ret = usbhsg_recip_run_handle(priv, recip_handler, &ctrl);
+	else
+		ret = gpriv->driver->setup(&gpriv->gadget, &ctrl);
+
+	if (ret < 0)
+		usbhs_pipe_stall(pipe);
+
+	return ret;
+}
+
+/*
+ *
+ *		usb_dcp_ops
+ *
+ */
+static int usbhsg_pipe_disable(struct usbhsg_uep *uep)
+{
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+	struct usbhs_pkt *pkt;
+
+	while (1) {
+		pkt = usbhs_pkt_pop(pipe, NULL);
+		if (!pkt)
+			break;
+
+		usbhsg_queue_pop(uep, usbhsg_pkt_to_ureq(pkt), -ESHUTDOWN);
+	}
+
+	usbhs_pipe_disable(pipe);
+
+	return 0;
+}
+
+/*
+ *
+ *		usb_ep_ops
+ *
+ */
+static int usbhsg_ep_enable(struct usb_ep *ep,
+			 const struct usb_endpoint_descriptor *desc)
+{
+	struct usbhsg_uep *uep   = usbhsg_ep_to_uep(ep);
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+	struct usbhs_pipe *pipe;
+	int ret = -EIO;
+	unsigned long flags;
+
+	usbhs_lock(priv, flags);
+
+	/*
+	 * if it already have pipe,
+	 * nothing to do
+	 */
+	if (uep->pipe) {
+		usbhs_pipe_clear(uep->pipe);
+		usbhs_pipe_sequence_data0(uep->pipe);
+		ret = 0;
+		goto usbhsg_ep_enable_end;
+	}
+
+	pipe = usbhs_pipe_malloc(priv,
+				 usb_endpoint_type(desc),
+				 usb_endpoint_dir_in(desc));
+	if (pipe) {
+		uep->pipe		= pipe;
+		pipe->mod_private	= uep;
+
+		/* set epnum / maxp */
+		usbhs_pipe_config_update(pipe, 0,
+					 usb_endpoint_num(desc),
+					 usb_endpoint_maxp(desc));
+
+		/*
+		 * usbhs_fifo_dma_push/pop_handler try to
+		 * use dmaengine if possible.
+		 * It will use pio handler if impossible.
+		 */
+		if (usb_endpoint_dir_in(desc)) {
+			pipe->handler = &usbhs_fifo_dma_push_handler;
+		} else {
+			pipe->handler = &usbhs_fifo_dma_pop_handler;
+			usbhs_xxxsts_clear(priv, BRDYSTS,
+					   usbhs_pipe_number(pipe));
+		}
+
+		ret = 0;
+	}
+
+usbhsg_ep_enable_end:
+	usbhs_unlock(priv, flags);
+
+	return ret;
+}
+
+static int usbhsg_ep_disable(struct usb_ep *ep)
+{
+	struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
+	struct usbhs_pipe *pipe;
+	unsigned long flags;
+
+	spin_lock_irqsave(&uep->lock, flags);
+	pipe = usbhsg_uep_to_pipe(uep);
+	if (!pipe)
+		goto out;
+
+	usbhsg_pipe_disable(uep);
+	usbhs_pipe_free(pipe);
+
+	uep->pipe->mod_private	= NULL;
+	uep->pipe		= NULL;
+
+out:
+	spin_unlock_irqrestore(&uep->lock, flags);
+
+	return 0;
+}
+
+static struct usb_request *usbhsg_ep_alloc_request(struct usb_ep *ep,
+						   gfp_t gfp_flags)
+{
+	struct usbhsg_request *ureq;
+
+	ureq = kzalloc(sizeof *ureq, gfp_flags);
+	if (!ureq)
+		return NULL;
+
+	usbhs_pkt_init(usbhsg_ureq_to_pkt(ureq));
+
+	return &ureq->req;
+}
+
+static void usbhsg_ep_free_request(struct usb_ep *ep,
+				   struct usb_request *req)
+{
+	struct usbhsg_request *ureq = usbhsg_req_to_ureq(req);
+
+	WARN_ON(!list_empty(&ureq->pkt.node));
+	kfree(ureq);
+}
+
+static int usbhsg_ep_queue(struct usb_ep *ep, struct usb_request *req,
+			  gfp_t gfp_flags)
+{
+	struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct usbhsg_request *ureq = usbhsg_req_to_ureq(req);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+
+	/* param check */
+	if (usbhsg_is_not_connected(gpriv)	||
+	    unlikely(!gpriv->driver)		||
+	    unlikely(!pipe))
+		return -ESHUTDOWN;
+
+	usbhsg_queue_push(uep, ureq);
+
+	return 0;
+}
+
+static int usbhsg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
+	struct usbhsg_request *ureq = usbhsg_req_to_ureq(req);
+	struct usbhs_pipe *pipe;
+	unsigned long flags;
+
+	spin_lock_irqsave(&uep->lock, flags);
+	pipe = usbhsg_uep_to_pipe(uep);
+	if (pipe)
+		usbhs_pkt_pop(pipe, usbhsg_ureq_to_pkt(ureq));
+
+	/*
+	 * To dequeue a request, this driver should call the usbhsg_queue_pop()
+	 * even if the pipe is NULL.
+	 */
+	usbhsg_queue_pop(uep, ureq, -ECONNRESET);
+	spin_unlock_irqrestore(&uep->lock, flags);
+
+	return 0;
+}
+
+static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge)
+{
+	struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	unsigned long flags;
+	int ret = 0;
+
+	dev_dbg(dev, "set halt %d (pipe %d)\n",
+		halt, usbhs_pipe_number(pipe));
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	/*
+	 * According to usb_ep_set_halt()'s description, this function should
+	 * return -EAGAIN if the IN endpoint has any queue or data. Note
+	 * that the usbhs_pipe_is_dir_in() returns false if the pipe is an
+	 * IN endpoint in the gadget mode.
+	 */
+	if (!usbhs_pipe_is_dir_in(pipe) && (__usbhsf_pkt_get(pipe) ||
+	    usbhs_pipe_contains_transmittable_data(pipe))) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	if (halt)
+		usbhs_pipe_stall(pipe);
+	else
+		usbhs_pipe_disable(pipe);
+
+	if (halt && wedge)
+		usbhsg_status_set(gpriv, USBHSG_STATUS_WEDGE);
+	else
+		usbhsg_status_clr(gpriv, USBHSG_STATUS_WEDGE);
+
+out:
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+
+	return ret;
+}
+
+static int usbhsg_ep_set_halt(struct usb_ep *ep, int value)
+{
+	return __usbhsg_ep_set_halt_wedge(ep, value, 0);
+}
+
+static int usbhsg_ep_set_wedge(struct usb_ep *ep)
+{
+	return __usbhsg_ep_set_halt_wedge(ep, 1, 1);
+}
+
+static const struct usb_ep_ops usbhsg_ep_ops = {
+	.enable		= usbhsg_ep_enable,
+	.disable	= usbhsg_ep_disable,
+
+	.alloc_request	= usbhsg_ep_alloc_request,
+	.free_request	= usbhsg_ep_free_request,
+
+	.queue		= usbhsg_ep_queue,
+	.dequeue	= usbhsg_ep_dequeue,
+
+	.set_halt	= usbhsg_ep_set_halt,
+	.set_wedge	= usbhsg_ep_set_wedge,
+};
+
+/*
+ *		pullup control
+ */
+static int usbhsg_can_pullup(struct usbhs_priv *priv)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+
+	return gpriv->driver &&
+	       usbhsg_status_has(gpriv, USBHSG_STATUS_SOFT_CONNECT);
+}
+
+static void usbhsg_update_pullup(struct usbhs_priv *priv)
+{
+	if (usbhsg_can_pullup(priv))
+		usbhs_sys_function_pullup(priv, 1);
+	else
+		usbhs_sys_function_pullup(priv, 0);
+}
+
+/*
+ *		usb module start/end
+ */
+static int usbhsg_try_start(struct usbhs_priv *priv, u32 status)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+	struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv);
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	unsigned long flags;
+	int ret = 0;
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	usbhsg_status_set(gpriv, status);
+	if (!(usbhsg_status_has(gpriv, USBHSG_STATUS_STARTED) &&
+	      usbhsg_status_has(gpriv, USBHSG_STATUS_REGISTERD)))
+		ret = -1; /* not ready */
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ********************/
+
+	if (ret < 0)
+		return 0; /* not ready is not error */
+
+	/*
+	 * enable interrupt and systems if ready
+	 */
+	dev_dbg(dev, "start gadget\n");
+
+	/*
+	 * pipe initialize and enable DCP
+	 */
+	usbhs_fifo_init(priv);
+	usbhs_pipe_init(priv,
+			usbhsg_dma_map_ctrl);
+
+	/* dcp init instead of usbhsg_ep_enable() */
+	dcp->pipe		= usbhs_dcp_malloc(priv);
+	dcp->pipe->mod_private	= dcp;
+	usbhs_pipe_config_update(dcp->pipe, 0, 0, 64);
+
+	/*
+	 * system config enble
+	 * - HI speed
+	 * - function
+	 * - usb module
+	 */
+	usbhs_sys_function_ctrl(priv, 1);
+	usbhsg_update_pullup(priv);
+
+	/*
+	 * enable irq callback
+	 */
+	mod->irq_dev_state	= usbhsg_irq_dev_state;
+	mod->irq_ctrl_stage	= usbhsg_irq_ctrl_stage;
+	usbhs_irq_callback_update(priv, mod);
+
+	return 0;
+}
+
+static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	struct usbhsg_uep *uep;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	unsigned long flags;
+	int ret = 0, i;
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	usbhsg_status_clr(gpriv, status);
+	if (!usbhsg_status_has(gpriv, USBHSG_STATUS_STARTED) &&
+	    !usbhsg_status_has(gpriv, USBHSG_STATUS_REGISTERD))
+		ret = -1; /* already done */
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ********************/
+
+	if (ret < 0)
+		return 0; /* already done is not error */
+
+	/*
+	 * disable interrupt and systems if 1st try
+	 */
+	usbhs_fifo_quit(priv);
+
+	/* disable all irq */
+	mod->irq_dev_state	= NULL;
+	mod->irq_ctrl_stage	= NULL;
+	usbhs_irq_callback_update(priv, mod);
+
+	gpriv->gadget.speed = USB_SPEED_UNKNOWN;
+
+	/* disable sys */
+	usbhs_sys_set_test_mode(priv, 0);
+	usbhs_sys_function_ctrl(priv, 0);
+
+	/* disable all eps */
+	usbhsg_for_each_uep_with_dcp(uep, gpriv, i)
+		usbhsg_ep_disable(&uep->ep);
+
+	dev_dbg(dev, "stop gadget\n");
+
+	return 0;
+}
+
+/*
+ * VBUS provided by the PHY
+ */
+static int usbhsm_phy_get_vbus(struct platform_device *pdev)
+{
+	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+
+	return  gpriv->vbus_active;
+}
+
+static void usbhs_mod_phy_mode(struct usbhs_priv *priv)
+{
+	struct usbhs_mod_info *info = &priv->mod_info;
+
+	info->irq_vbus = NULL;
+	info->get_vbus = usbhsm_phy_get_vbus;
+
+	usbhs_irq_callback_update(priv, NULL);
+}
+
+/*
+ *
+ *		linux usb function
+ *
+ */
+static int usbhsg_gadget_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int ret;
+
+	if (!driver		||
+	    !driver->setup	||
+	    driver->max_speed < USB_SPEED_FULL)
+		return -EINVAL;
+
+	/* connect to bus through transceiver */
+	if (!IS_ERR_OR_NULL(gpriv->transceiver)) {
+		ret = otg_set_peripheral(gpriv->transceiver->otg,
+					&gpriv->gadget);
+		if (ret) {
+			dev_err(dev, "%s: can't bind to transceiver\n",
+				gpriv->gadget.name);
+			return ret;
+		}
+
+		/* get vbus using phy versions */
+		usbhs_mod_phy_mode(priv);
+	}
+
+	/* first hook up the driver ... */
+	gpriv->driver = driver;
+
+	return usbhsg_try_start(priv, USBHSG_STATUS_REGISTERD);
+}
+
+static int usbhsg_gadget_stop(struct usb_gadget *gadget)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+
+	usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD);
+
+	if (!IS_ERR_OR_NULL(gpriv->transceiver))
+		otg_set_peripheral(gpriv->transceiver->otg, NULL);
+
+	gpriv->driver = NULL;
+
+	return 0;
+}
+
+/*
+ *		usb gadget ops
+ */
+static int usbhsg_get_frame(struct usb_gadget *gadget)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+
+	return usbhs_frame_get_num(priv);
+}
+
+static int usbhsg_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+	unsigned long flags;
+
+	usbhs_lock(priv, flags);
+	if (is_on)
+		usbhsg_status_set(gpriv, USBHSG_STATUS_SOFT_CONNECT);
+	else
+		usbhsg_status_clr(gpriv, USBHSG_STATUS_SOFT_CONNECT);
+	usbhsg_update_pullup(priv);
+	usbhs_unlock(priv, flags);
+
+	return 0;
+}
+
+static int usbhsg_set_selfpowered(struct usb_gadget *gadget, int is_self)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
+
+	if (is_self)
+		usbhsg_status_set(gpriv, USBHSG_STATUS_SELF_POWERED);
+	else
+		usbhsg_status_clr(gpriv, USBHSG_STATUS_SELF_POWERED);
+
+	gadget->is_selfpowered = (is_self != 0);
+
+	return 0;
+}
+
+static int usbhsg_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+	struct platform_device *pdev = usbhs_priv_to_pdev(priv);
+
+	gpriv->vbus_active = !!is_active;
+
+	usbhsc_schedule_notify_hotplug(pdev);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops usbhsg_gadget_ops = {
+	.get_frame		= usbhsg_get_frame,
+	.set_selfpowered	= usbhsg_set_selfpowered,
+	.udc_start		= usbhsg_gadget_start,
+	.udc_stop		= usbhsg_gadget_stop,
+	.pullup			= usbhsg_pullup,
+	.vbus_session		= usbhsg_vbus_session,
+};
+
+static int usbhsg_start(struct usbhs_priv *priv)
+{
+	return usbhsg_try_start(priv, USBHSG_STATUS_STARTED);
+}
+
+static int usbhsg_stop(struct usbhs_priv *priv)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+
+	/* cable disconnect */
+	if (gpriv->driver &&
+	    gpriv->driver->disconnect)
+		gpriv->driver->disconnect(&gpriv->gadget);
+
+	return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED);
+}
+
+int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
+{
+	struct usbhsg_gpriv *gpriv;
+	struct usbhsg_uep *uep;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct renesas_usbhs_driver_pipe_config *pipe_configs =
+					usbhs_get_dparam(priv, pipe_configs);
+	int pipe_size = usbhs_get_dparam(priv, pipe_size);
+	int i;
+	int ret;
+
+	gpriv = kzalloc(sizeof(struct usbhsg_gpriv), GFP_KERNEL);
+	if (!gpriv)
+		return -ENOMEM;
+
+	uep = kcalloc(pipe_size, sizeof(struct usbhsg_uep), GFP_KERNEL);
+	if (!uep) {
+		ret = -ENOMEM;
+		goto usbhs_mod_gadget_probe_err_gpriv;
+	}
+
+	gpriv->transceiver = usb_get_phy(USB_PHY_TYPE_UNDEFINED);
+	dev_info(dev, "%stransceiver found\n",
+		 !IS_ERR(gpriv->transceiver) ? "" : "no ");
+
+	/*
+	 * CAUTION
+	 *
+	 * There is no guarantee that it is possible to access usb module here.
+	 * Don't accesses to it.
+	 * The accesse will be enable after "usbhsg_start"
+	 */
+
+	/*
+	 * register itself
+	 */
+	usbhs_mod_register(priv, &gpriv->mod, USBHS_GADGET);
+
+	/* init gpriv */
+	gpriv->mod.name		= "gadget";
+	gpriv->mod.start	= usbhsg_start;
+	gpriv->mod.stop		= usbhsg_stop;
+	gpriv->uep		= uep;
+	gpriv->uep_size		= pipe_size;
+	usbhsg_status_init(gpriv);
+
+	/*
+	 * init gadget
+	 */
+	gpriv->gadget.dev.parent	= dev;
+	gpriv->gadget.name		= "renesas_usbhs_udc";
+	gpriv->gadget.ops		= &usbhsg_gadget_ops;
+	gpriv->gadget.max_speed		= USB_SPEED_HIGH;
+	gpriv->gadget.quirk_avoids_skb_reserve = usbhs_get_dparam(priv,
+								has_usb_dmac);
+
+	INIT_LIST_HEAD(&gpriv->gadget.ep_list);
+
+	/*
+	 * init usb_ep
+	 */
+	usbhsg_for_each_uep_with_dcp(uep, gpriv, i) {
+		uep->gpriv	= gpriv;
+		uep->pipe	= NULL;
+		snprintf(uep->ep_name, EP_NAME_SIZE, "ep%d", i);
+
+		uep->ep.name		= uep->ep_name;
+		uep->ep.ops		= &usbhsg_ep_ops;
+		INIT_LIST_HEAD(&uep->ep.ep_list);
+		spin_lock_init(&uep->lock);
+
+		/* init DCP */
+		if (usbhsg_is_dcp(uep)) {
+			gpriv->gadget.ep0 = &uep->ep;
+			usb_ep_set_maxpacket_limit(&uep->ep, 64);
+			uep->ep.caps.type_control = true;
+		} else {
+			/* init normal pipe */
+			if (pipe_configs[i].type == USB_ENDPOINT_XFER_ISOC)
+				uep->ep.caps.type_iso = true;
+			if (pipe_configs[i].type == USB_ENDPOINT_XFER_BULK)
+				uep->ep.caps.type_bulk = true;
+			if (pipe_configs[i].type == USB_ENDPOINT_XFER_INT)
+				uep->ep.caps.type_int = true;
+			usb_ep_set_maxpacket_limit(&uep->ep,
+						   pipe_configs[i].bufsize);
+			list_add_tail(&uep->ep.ep_list, &gpriv->gadget.ep_list);
+		}
+		uep->ep.caps.dir_in = true;
+		uep->ep.caps.dir_out = true;
+	}
+
+	ret = usb_add_gadget_udc(dev, &gpriv->gadget);
+	if (ret)
+		goto err_add_udc;
+
+
+	dev_info(dev, "gadget probed\n");
+
+	return 0;
+
+err_add_udc:
+	kfree(gpriv->uep);
+
+usbhs_mod_gadget_probe_err_gpriv:
+	kfree(gpriv);
+
+	return ret;
+}
+
+void usbhs_mod_gadget_remove(struct usbhs_priv *priv)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+
+	usb_del_gadget_udc(&gpriv->gadget);
+
+	kfree(gpriv->uep);
+	kfree(gpriv);
+}
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
new file mode 100644
index 000000000..ae5422101
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -0,0 +1,1574 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include "common.h"
+
+/*
+ *** HARDWARE LIMITATION ***
+ *
+ * 1) renesas_usbhs has a limited number of controllable devices.
+ *    it can control only 9 devices in generally.
+ *	see DEVADDn / DCPMAXP / PIPEMAXP.
+ *
+ * 2) renesas_usbhs pipe number is limited.
+ *    the pipe will be re-used for each devices.
+ *    so, software should control DATA0/1 sequence of each devices.
+ */
+
+
+/*
+ *		image of mod_host
+ *
+ * +--------+
+ * | udev 0 | --> it is used when set address
+ * +--------+
+ *
+ * +--------+					pipes are reused for each uep.
+ * | udev 1 |-+- [uep 0 (dcp) ] --+		pipe will be switched when
+ * +--------+ |			  |		other device requested
+ *	      +- [uep 1 (bulk)]	--|---+		   +--------------+
+ *	      |			  +--------------> | pipe0 (dcp)  |
+ *	      +- [uep 2 (bulk)]	-@    |		   +--------------+
+ *				      |		   | pipe1 (isoc) |
+ * +--------+			      |		   +--------------+
+ * | udev 2 |-+- [uep 0 (dcp) ]	-@    +----------> | pipe2 (bulk) |
+ * +--------+ |					   +--------------+
+ *	      +- [uep 1 (int) ]	----+	  +------> | pipe3 (bulk) |
+ *				    |	  |	   +--------------+
+ * +--------+			    +-----|------> | pipe4 (int)  |
+ * | udev 3 |-+- [uep 0 (dcp) ]	-@	  |	   +--------------+
+ * +--------+ |				  |	   | ....	  |
+ *	      +- [uep 1 (bulk)]	-@	  |	   | ....	  |
+ *	      |				  |
+ *	      +- [uep 2 (bulk)]-----------+
+ *
+ * @ :	uep requested free pipe, but all have been used.
+ *	now it is waiting for free pipe
+ */
+
+
+/*
+ *		struct
+ */
+struct usbhsh_request {
+	struct urb		*urb;
+	struct usbhs_pkt	pkt;
+};
+
+struct usbhsh_device {
+	struct usb_device	*usbv;
+	struct list_head	ep_list_head; /* list of usbhsh_ep */
+};
+
+struct usbhsh_ep {
+	struct usbhs_pipe	*pipe;   /* attached pipe */
+	struct usbhsh_device	*udev;   /* attached udev */
+	struct usb_host_endpoint *ep;
+	struct list_head	ep_list; /* list to usbhsh_device */
+	unsigned int		counter; /* pipe attach counter */
+};
+
+#define USBHSH_DEVICE_MAX	10 /* see DEVADDn / DCPMAXP / PIPEMAXP */
+#define USBHSH_PORT_MAX		 7 /* see DEVADDn :: HUBPORT */
+struct usbhsh_hpriv {
+	struct usbhs_mod	mod;
+	struct usbhs_pipe	*dcp;
+
+	struct usbhsh_device	udev[USBHSH_DEVICE_MAX];
+
+	u32	port_stat;	/* USB_PORT_STAT_xxx */
+
+	struct completion	setup_ack_done;
+};
+
+
+static const char usbhsh_hcd_name[] = "renesas_usbhs host";
+
+/*
+ *		macro
+ */
+#define usbhsh_priv_to_hpriv(priv) \
+	container_of(usbhs_mod_get(priv, USBHS_HOST), struct usbhsh_hpriv, mod)
+
+#define __usbhsh_for_each_udev(start, pos, h, i)	\
+	for ((i) = start;						\
+	     ((i) < USBHSH_DEVICE_MAX) && ((pos) = (h)->udev + (i));	\
+	     (i)++)
+
+#define usbhsh_for_each_udev(pos, hpriv, i)	\
+	__usbhsh_for_each_udev(1, pos, hpriv, i)
+
+#define usbhsh_for_each_udev_with_dev0(pos, hpriv, i)	\
+	__usbhsh_for_each_udev(0, pos, hpriv, i)
+
+#define usbhsh_hcd_to_hpriv(h)	(struct usbhsh_hpriv *)((h)->hcd_priv)
+#define usbhsh_hcd_to_dev(h)	((h)->self.controller)
+
+#define usbhsh_hpriv_to_priv(h)	((h)->mod.priv)
+#define usbhsh_hpriv_to_dcp(h)	((h)->dcp)
+#define usbhsh_hpriv_to_hcd(h)	\
+	container_of((void *)h, struct usb_hcd, hcd_priv)
+
+#define usbhsh_ep_to_uep(u)	((u)->hcpriv)
+#define usbhsh_uep_to_pipe(u)	((u)->pipe)
+#define usbhsh_uep_to_udev(u)	((u)->udev)
+#define usbhsh_uep_to_ep(u)	((u)->ep)
+
+#define usbhsh_urb_to_ureq(u)	((u)->hcpriv)
+#define usbhsh_urb_to_usbv(u)	((u)->dev)
+
+#define usbhsh_usbv_to_udev(d)	dev_get_drvdata(&(d)->dev)
+
+#define usbhsh_udev_to_usbv(h)	((h)->usbv)
+#define usbhsh_udev_is_used(h)	usbhsh_udev_to_usbv(h)
+
+#define usbhsh_pipe_to_uep(p)	((p)->mod_private)
+
+#define usbhsh_device_parent(d)		(usbhsh_usbv_to_udev((d)->usbv->parent))
+#define usbhsh_device_hubport(d)	((d)->usbv->portnum)
+#define usbhsh_device_number(h, d)	((int)((d) - (h)->udev))
+#define usbhsh_device_nth(h, d)		((h)->udev + d)
+#define usbhsh_device0(h)		usbhsh_device_nth(h, 0)
+
+#define usbhsh_port_stat_init(h)	((h)->port_stat = 0)
+#define usbhsh_port_stat_set(h, s)	((h)->port_stat |= (s))
+#define usbhsh_port_stat_clear(h, s)	((h)->port_stat &= ~(s))
+#define usbhsh_port_stat_get(h)		((h)->port_stat)
+
+#define usbhsh_pkt_to_ureq(p)	\
+	container_of((void *)p, struct usbhsh_request, pkt)
+
+/*
+ *		req alloc/free
+ */
+static struct usbhsh_request *usbhsh_ureq_alloc(struct usbhsh_hpriv *hpriv,
+					       struct urb *urb,
+					       gfp_t mem_flags)
+{
+	struct usbhsh_request *ureq;
+
+	ureq = kzalloc(sizeof(struct usbhsh_request), mem_flags);
+	if (!ureq)
+		return NULL;
+
+	usbhs_pkt_init(&ureq->pkt);
+	ureq->urb = urb;
+	usbhsh_urb_to_ureq(urb) = ureq;
+
+	return ureq;
+}
+
+static void usbhsh_ureq_free(struct usbhsh_hpriv *hpriv,
+			    struct usbhsh_request *ureq)
+{
+	usbhsh_urb_to_ureq(ureq->urb) = NULL;
+	ureq->urb = NULL;
+
+	kfree(ureq);
+}
+
+/*
+ *		status
+ */
+static int usbhsh_is_running(struct usbhsh_hpriv *hpriv)
+{
+	/*
+	 * we can decide some device is attached or not
+	 * by checking mod.irq_attch
+	 * see
+	 *	usbhsh_irq_attch()
+	 *	usbhsh_irq_dtch()
+	 */
+	return (hpriv->mod.irq_attch == NULL);
+}
+
+/*
+ *		pipe control
+ */
+static void usbhsh_endpoint_sequence_save(struct usbhsh_hpriv *hpriv,
+					  struct urb *urb,
+					  struct usbhs_pkt *pkt)
+{
+	int len = urb->actual_length;
+	int maxp = usb_endpoint_maxp(&urb->ep->desc);
+	int t = 0;
+
+	/* DCP is out of sequence control */
+	if (usb_pipecontrol(urb->pipe))
+		return;
+
+	/*
+	 * renesas_usbhs pipe has a limitation in a number.
+	 * So, driver should re-use the limited pipe for each device/endpoint.
+	 * DATA0/1 sequence should be saved for it.
+	 * see [image of mod_host]
+	 *     [HARDWARE LIMITATION]
+	 */
+
+	/*
+	 * next sequence depends on actual_length
+	 *
+	 * ex) actual_length = 1147, maxp = 512
+	 * data0 : 512
+	 * data1 : 512
+	 * data0 : 123
+	 * data1 is the next sequence
+	 */
+	t = len / maxp;
+	if (len % maxp)
+		t++;
+	if (pkt->zero)
+		t++;
+	t %= 2;
+
+	if (t)
+		usb_dotoggle(urb->dev,
+			     usb_pipeendpoint(urb->pipe),
+			     usb_pipeout(urb->pipe));
+}
+
+static struct usbhsh_device *usbhsh_device_get(struct usbhsh_hpriv *hpriv,
+					       struct urb *urb);
+
+static int usbhsh_pipe_attach(struct usbhsh_hpriv *hpriv,
+			      struct urb *urb)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
+	struct usbhsh_device *udev = usbhsh_device_get(hpriv, urb);
+	struct usbhs_pipe *pipe;
+	struct usb_endpoint_descriptor *desc = &urb->ep->desc;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	unsigned long flags;
+	int dir_in_req = !!usb_pipein(urb->pipe);
+	int is_dcp = usb_endpoint_xfer_control(desc);
+	int i, dir_in;
+	int ret = -EBUSY;
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	/*
+	 * if uep has been attached to pipe,
+	 * reuse it
+	 */
+	if (usbhsh_uep_to_pipe(uep)) {
+		ret = 0;
+		goto usbhsh_pipe_attach_done;
+	}
+
+	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
+
+		/* check pipe type */
+		if (!usbhs_pipe_type_is(pipe, usb_endpoint_type(desc)))
+			continue;
+
+		/* check pipe direction if normal pipe */
+		if (!is_dcp) {
+			dir_in = !!usbhs_pipe_is_dir_in(pipe);
+			if (0 != (dir_in - dir_in_req))
+				continue;
+		}
+
+		/* check pipe is free */
+		if (usbhsh_pipe_to_uep(pipe))
+			continue;
+
+		/*
+		 * attach pipe to uep
+		 *
+		 * usbhs_pipe_config_update() should be called after
+		 * usbhs_set_device_config()
+		 * see
+		 *  DCPMAXP/PIPEMAXP
+		 */
+		usbhsh_uep_to_pipe(uep)		= pipe;
+		usbhsh_pipe_to_uep(pipe)	= uep;
+
+		usbhs_pipe_config_update(pipe,
+					 usbhsh_device_number(hpriv, udev),
+					 usb_endpoint_num(desc),
+					 usb_endpoint_maxp(desc));
+
+		dev_dbg(dev, "%s [%d-%d(%s:%s)]\n", __func__,
+			usbhsh_device_number(hpriv, udev),
+			usb_endpoint_num(desc),
+			usbhs_pipe_name(pipe),
+			dir_in_req ? "in" : "out");
+
+		ret = 0;
+		break;
+	}
+
+usbhsh_pipe_attach_done:
+	if (0 == ret)
+		uep->counter++;
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+
+	return ret;
+}
+
+static void usbhsh_pipe_detach(struct usbhsh_hpriv *hpriv,
+			       struct usbhsh_ep *uep)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct usbhs_pipe *pipe;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	unsigned long flags;
+
+	if (unlikely(!uep)) {
+		dev_err(dev, "no uep\n");
+		return;
+	}
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	pipe = usbhsh_uep_to_pipe(uep);
+
+	if (unlikely(!pipe)) {
+		dev_err(dev, "uep doesn't have pipe\n");
+	} else if (1 == uep->counter--) { /* last user */
+		struct usb_host_endpoint *ep = usbhsh_uep_to_ep(uep);
+		struct usbhsh_device *udev = usbhsh_uep_to_udev(uep);
+
+		/* detach pipe from uep */
+		usbhsh_uep_to_pipe(uep)		= NULL;
+		usbhsh_pipe_to_uep(pipe)	= NULL;
+
+		dev_dbg(dev, "%s [%d-%d(%s)]\n", __func__,
+			usbhsh_device_number(hpriv, udev),
+			usb_endpoint_num(&ep->desc),
+			usbhs_pipe_name(pipe));
+	}
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+}
+
+/*
+ *		endpoint control
+ */
+static int usbhsh_endpoint_attach(struct usbhsh_hpriv *hpriv,
+				  struct urb *urb,
+				  gfp_t mem_flags)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct usbhsh_device *udev = usbhsh_device_get(hpriv, urb);
+	struct usb_host_endpoint *ep = urb->ep;
+	struct usbhsh_ep *uep;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct usb_endpoint_descriptor *desc = &ep->desc;
+	unsigned long flags;
+
+	uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags);
+	if (!uep)
+		return -ENOMEM;
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	/*
+	 * init endpoint
+	 */
+	uep->counter = 0;
+	INIT_LIST_HEAD(&uep->ep_list);
+	list_add_tail(&uep->ep_list, &udev->ep_list_head);
+
+	usbhsh_uep_to_udev(uep)	= udev;
+	usbhsh_uep_to_ep(uep)	= ep;
+	usbhsh_ep_to_uep(ep)	= uep;
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+
+	dev_dbg(dev, "%s [%d-%d]\n", __func__,
+		usbhsh_device_number(hpriv, udev),
+		usb_endpoint_num(desc));
+
+	return 0;
+}
+
+static void usbhsh_endpoint_detach(struct usbhsh_hpriv *hpriv,
+				   struct usb_host_endpoint *ep)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep);
+	unsigned long flags;
+
+	if (!uep)
+		return;
+
+	dev_dbg(dev, "%s [%d-%d]\n", __func__,
+		usbhsh_device_number(hpriv, usbhsh_uep_to_udev(uep)),
+		usb_endpoint_num(&ep->desc));
+
+	if (usbhsh_uep_to_pipe(uep))
+		usbhsh_pipe_detach(hpriv, uep);
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	/* remove this endpoint from udev */
+	list_del_init(&uep->ep_list);
+
+	usbhsh_uep_to_udev(uep)	= NULL;
+	usbhsh_uep_to_ep(uep)	= NULL;
+	usbhsh_ep_to_uep(ep)	= NULL;
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+
+	kfree(uep);
+}
+
+static void usbhsh_endpoint_detach_all(struct usbhsh_hpriv *hpriv,
+				       struct usbhsh_device *udev)
+{
+	struct usbhsh_ep *uep, *next;
+
+	list_for_each_entry_safe(uep, next, &udev->ep_list_head, ep_list)
+		usbhsh_endpoint_detach(hpriv, usbhsh_uep_to_ep(uep));
+}
+
+/*
+ *		device control
+ */
+static int usbhsh_connected_to_rhdev(struct usb_hcd *hcd,
+				     struct usbhsh_device *udev)
+{
+	struct usb_device *usbv = usbhsh_udev_to_usbv(udev);
+
+	return hcd->self.root_hub == usbv->parent;
+}
+
+static int usbhsh_device_has_endpoint(struct usbhsh_device *udev)
+{
+	return !list_empty(&udev->ep_list_head);
+}
+
+static struct usbhsh_device *usbhsh_device_get(struct usbhsh_hpriv *hpriv,
+					       struct urb *urb)
+{
+	struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
+	struct usbhsh_device *udev = usbhsh_usbv_to_udev(usbv);
+
+	/* usbhsh_device_attach() is still not called */
+	if (!udev)
+		return NULL;
+
+	/* if it is device0, return it */
+	if (0 == usb_pipedevice(urb->pipe))
+		return usbhsh_device0(hpriv);
+
+	/* return attached device */
+	return udev;
+}
+
+static struct usbhsh_device *usbhsh_device_attach(struct usbhsh_hpriv *hpriv,
+						 struct urb *urb)
+{
+	struct usbhsh_device *udev = NULL;
+	struct usbhsh_device *udev0 = usbhsh_device0(hpriv);
+	struct usbhsh_device *pos;
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct device *dev = usbhsh_hcd_to_dev(hcd);
+	struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	unsigned long flags;
+	u16 upphub, hubport;
+	int i;
+
+	/*
+	 * This function should be called only while urb is pointing to device0.
+	 * It will attach unused usbhsh_device to urb (usbv),
+	 * and initialize device0.
+	 * You can use usbhsh_device_get() to get "current" udev,
+	 * and usbhsh_usbv_to_udev() is for "attached" udev.
+	 */
+	if (0 != usb_pipedevice(urb->pipe)) {
+		dev_err(dev, "%s fail: urb isn't pointing device0\n", __func__);
+		return NULL;
+	}
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	/*
+	 * find unused device
+	 */
+	usbhsh_for_each_udev(pos, hpriv, i) {
+		if (usbhsh_udev_is_used(pos))
+			continue;
+		udev = pos;
+		break;
+	}
+
+	if (udev) {
+		/*
+		 * usbhsh_usbv_to_udev()
+		 * usbhsh_udev_to_usbv()
+		 * will be enable
+		 */
+		dev_set_drvdata(&usbv->dev, udev);
+		udev->usbv = usbv;
+	}
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+
+	if (!udev) {
+		dev_err(dev, "no free usbhsh_device\n");
+		return NULL;
+	}
+
+	if (usbhsh_device_has_endpoint(udev)) {
+		dev_warn(dev, "udev have old endpoint\n");
+		usbhsh_endpoint_detach_all(hpriv, udev);
+	}
+
+	if (usbhsh_device_has_endpoint(udev0)) {
+		dev_warn(dev, "udev0 have old endpoint\n");
+		usbhsh_endpoint_detach_all(hpriv, udev0);
+	}
+
+	/* uep will be attached */
+	INIT_LIST_HEAD(&udev0->ep_list_head);
+	INIT_LIST_HEAD(&udev->ep_list_head);
+
+	/*
+	 * set device0 config
+	 */
+	usbhs_set_device_config(priv,
+				0, 0, 0, usbv->speed);
+
+	/*
+	 * set new device config
+	 */
+	upphub	= 0;
+	hubport	= 0;
+	if (!usbhsh_connected_to_rhdev(hcd, udev)) {
+		/* if udev is not connected to rhdev, it means parent is Hub */
+		struct usbhsh_device *parent = usbhsh_device_parent(udev);
+
+		upphub	= usbhsh_device_number(hpriv, parent);
+		hubport	= usbhsh_device_hubport(udev);
+
+		dev_dbg(dev, "%s connected to Hub [%d:%d](%p)\n", __func__,
+			upphub, hubport, parent);
+	}
+
+	usbhs_set_device_config(priv,
+			       usbhsh_device_number(hpriv, udev),
+			       upphub, hubport, usbv->speed);
+
+	dev_dbg(dev, "%s [%d](%p)\n", __func__,
+		usbhsh_device_number(hpriv, udev), udev);
+
+	return udev;
+}
+
+static void usbhsh_device_detach(struct usbhsh_hpriv *hpriv,
+			       struct usbhsh_device *udev)
+{
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhsh_hcd_to_dev(hcd);
+	struct usb_device *usbv = usbhsh_udev_to_usbv(udev);
+	unsigned long flags;
+
+	dev_dbg(dev, "%s [%d](%p)\n", __func__,
+		usbhsh_device_number(hpriv, udev), udev);
+
+	if (usbhsh_device_has_endpoint(udev)) {
+		dev_warn(dev, "udev still have endpoint\n");
+		usbhsh_endpoint_detach_all(hpriv, udev);
+	}
+
+	/*
+	 * There is nothing to do if it is device0.
+	 * see
+	 *  usbhsh_device_attach()
+	 *  usbhsh_device_get()
+	 */
+	if (0 == usbhsh_device_number(hpriv, udev))
+		return;
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	/*
+	 * usbhsh_usbv_to_udev()
+	 * usbhsh_udev_to_usbv()
+	 * will be disable
+	 */
+	dev_set_drvdata(&usbv->dev, NULL);
+	udev->usbv = NULL;
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+}
+
+/*
+ *		queue push/pop
+ */
+static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
+{
+	struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt);
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct urb *urb = ureq->urb;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int status = 0;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	if (!urb) {
+		dev_warn(dev, "pkt doesn't have urb\n");
+		return;
+	}
+
+	if (!usbhsh_is_running(hpriv))
+		status = -ESHUTDOWN;
+
+	urb->actual_length = pkt->actual;
+
+	usbhsh_endpoint_sequence_save(hpriv, urb, pkt);
+	usbhsh_ureq_free(hpriv, ureq);
+
+	usbhsh_pipe_detach(hpriv, usbhsh_ep_to_uep(urb->ep));
+
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+	usb_hcd_giveback_urb(hcd, urb, status);
+}
+
+static int usbhsh_queue_push(struct usb_hcd *hcd,
+			     struct urb *urb,
+			     gfp_t mem_flags)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
+	struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
+	struct usbhs_pipe *pipe = usbhsh_uep_to_pipe(uep);
+	struct device *dev = usbhsh_hcd_to_dev(hcd);
+	struct usbhsh_request *ureq;
+	void *buf;
+	int len, sequence;
+
+	if (usb_pipeisoc(urb->pipe)) {
+		dev_err(dev, "pipe iso is not supported now\n");
+		return -EIO;
+	}
+
+	/* this ureq will be freed on usbhsh_queue_done() */
+	ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags);
+	if (unlikely(!ureq)) {
+		dev_err(dev, "ureq alloc fail\n");
+		return -ENOMEM;
+	}
+
+	if (usb_pipein(urb->pipe))
+		pipe->handler = &usbhs_fifo_dma_pop_handler;
+	else
+		pipe->handler = &usbhs_fifo_dma_push_handler;
+
+	buf = (void *)(urb->transfer_buffer + urb->actual_length);
+	len = urb->transfer_buffer_length - urb->actual_length;
+
+	sequence = usb_gettoggle(urb->dev,
+				 usb_pipeendpoint(urb->pipe),
+				 usb_pipeout(urb->pipe));
+
+	dev_dbg(dev, "%s\n", __func__);
+	usbhs_pkt_push(pipe, &ureq->pkt, usbhsh_queue_done,
+		       buf, len, (urb->transfer_flags & URB_ZERO_PACKET),
+		       sequence);
+
+	usbhs_pkt_start(pipe);
+
+	return 0;
+}
+
+static void usbhsh_queue_force_pop(struct usbhs_priv *priv,
+				   struct usbhs_pipe *pipe)
+{
+	struct usbhs_pkt *pkt;
+
+	while (1) {
+		pkt = usbhs_pkt_pop(pipe, NULL);
+		if (!pkt)
+			break;
+
+		/*
+		 * if all packet are gone, usbhsh_endpoint_disable()
+		 * will be called.
+		 * then, attached device/endpoint/pipe will be detached
+		 */
+		usbhsh_queue_done(priv, pkt);
+	}
+}
+
+static void usbhsh_queue_force_pop_all(struct usbhs_priv *priv)
+{
+	struct usbhs_pipe *pos;
+	int i;
+
+	usbhs_for_each_pipe_with_dcp(pos, priv, i)
+		usbhsh_queue_force_pop(priv, pos);
+}
+
+/*
+ *		DCP setup stage
+ */
+static int usbhsh_is_request_address(struct urb *urb)
+{
+	struct usb_ctrlrequest *req;
+
+	req = (struct usb_ctrlrequest *)urb->setup_packet;
+
+	if ((DeviceOutRequest    == req->bRequestType << 8) &&
+	    (USB_REQ_SET_ADDRESS == req->bRequest))
+		return 1;
+	else
+		return 0;
+}
+
+static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv,
+					   struct urb *urb,
+					   struct usbhs_pipe *pipe)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct usb_ctrlrequest req;
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	/*
+	 * wait setup packet ACK
+	 * see
+	 *	usbhsh_irq_setup_ack()
+	 *	usbhsh_irq_setup_err()
+	 */
+	init_completion(&hpriv->setup_ack_done);
+
+	/* copy original request */
+	memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest));
+
+	/*
+	 * renesas_usbhs can not use original usb address.
+	 * see HARDWARE LIMITATION.
+	 * modify usb address here to use attached device.
+	 * see usbhsh_device_attach()
+	 */
+	if (usbhsh_is_request_address(urb)) {
+		struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
+		struct usbhsh_device *udev = usbhsh_usbv_to_udev(usbv);
+
+		/* udev is a attached device */
+		req.wValue = usbhsh_device_number(hpriv, udev);
+		dev_dbg(dev, "create new address - %d\n", req.wValue);
+	}
+
+	/* set request */
+	usbhs_usbreq_set_val(priv, &req);
+
+	/*
+	 * wait setup packet ACK
+	 */
+	wait_for_completion(&hpriv->setup_ack_done);
+
+	dev_dbg(dev, "%s done\n", __func__);
+}
+
+/*
+ *		DCP data stage
+ */
+static void usbhsh_data_stage_packet_done(struct usbhs_priv *priv,
+					  struct usbhs_pkt *pkt)
+{
+	struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt);
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+
+	/* this ureq was connected to urb when usbhsh_urb_enqueue()  */
+
+	usbhsh_ureq_free(hpriv, ureq);
+}
+
+static int usbhsh_data_stage_packet_push(struct usbhsh_hpriv *hpriv,
+					 struct urb *urb,
+					 struct usbhs_pipe *pipe,
+					 gfp_t mem_flags)
+
+{
+	struct usbhsh_request *ureq;
+
+	/* this ureq will be freed on usbhsh_data_stage_packet_done() */
+	ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags);
+	if (unlikely(!ureq))
+		return -ENOMEM;
+
+	if (usb_pipein(urb->pipe))
+		pipe->handler = &usbhs_dcp_data_stage_in_handler;
+	else
+		pipe->handler = &usbhs_dcp_data_stage_out_handler;
+
+	usbhs_pkt_push(pipe, &ureq->pkt,
+		       usbhsh_data_stage_packet_done,
+		       urb->transfer_buffer,
+		       urb->transfer_buffer_length,
+		       (urb->transfer_flags & URB_ZERO_PACKET),
+		       -1);
+
+	return 0;
+}
+
+/*
+ *		DCP status stage
+ */
+static int usbhsh_status_stage_packet_push(struct usbhsh_hpriv *hpriv,
+					    struct urb *urb,
+					    struct usbhs_pipe *pipe,
+					    gfp_t mem_flags)
+{
+	struct usbhsh_request *ureq;
+
+	/* This ureq will be freed on usbhsh_queue_done() */
+	ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags);
+	if (unlikely(!ureq))
+		return -ENOMEM;
+
+	if (usb_pipein(urb->pipe))
+		pipe->handler = &usbhs_dcp_status_stage_in_handler;
+	else
+		pipe->handler = &usbhs_dcp_status_stage_out_handler;
+
+	usbhs_pkt_push(pipe, &ureq->pkt,
+		       usbhsh_queue_done,
+		       NULL,
+		       urb->transfer_buffer_length,
+		       0, -1);
+
+	return 0;
+}
+
+static int usbhsh_dcp_queue_push(struct usb_hcd *hcd,
+				 struct urb *urb,
+				 gfp_t mflags)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
+	struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
+	struct usbhs_pipe *pipe = usbhsh_uep_to_pipe(uep);
+	struct device *dev = usbhsh_hcd_to_dev(hcd);
+	int ret;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	/*
+	 * setup stage
+	 *
+	 * usbhsh_send_setup_stage_packet() wait SACK/SIGN
+	 */
+	usbhsh_setup_stage_packet_push(hpriv, urb, pipe);
+
+	/*
+	 * data stage
+	 *
+	 * It is pushed only when urb has buffer.
+	 */
+	if (urb->transfer_buffer_length) {
+		ret = usbhsh_data_stage_packet_push(hpriv, urb, pipe, mflags);
+		if (ret < 0) {
+			dev_err(dev, "data stage failed\n");
+			return ret;
+		}
+	}
+
+	/*
+	 * status stage
+	 */
+	ret = usbhsh_status_stage_packet_push(hpriv, urb, pipe, mflags);
+	if (ret < 0) {
+		dev_err(dev, "status stage failed\n");
+		return ret;
+	}
+
+	/*
+	 * start pushed packets
+	 */
+	usbhs_pkt_start(pipe);
+
+	return 0;
+}
+
+/*
+ *		dma map functions
+ */
+static int usbhsh_dma_map_ctrl(struct device *dma_dev, struct usbhs_pkt *pkt,
+			       int map)
+{
+	if (map) {
+		struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt);
+		struct urb *urb = ureq->urb;
+
+		/* it can not use scatter/gather */
+		if (urb->num_sgs)
+			return -EINVAL;
+
+		pkt->dma = urb->transfer_dma;
+		if (!pkt->dma)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ *		for hc_driver
+ */
+static int usbhsh_host_start(struct usb_hcd *hcd)
+{
+	return 0;
+}
+
+static void usbhsh_host_stop(struct usb_hcd *hcd)
+{
+}
+
+static int usbhsh_urb_enqueue(struct usb_hcd *hcd,
+			      struct urb *urb,
+			      gfp_t mem_flags)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct usb_host_endpoint *ep = urb->ep;
+	struct usbhsh_device *new_udev = NULL;
+	int is_dir_in = usb_pipein(urb->pipe);
+	int ret;
+
+	dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out");
+
+	if (!usbhsh_is_running(hpriv)) {
+		ret = -EIO;
+		dev_err(dev, "host is not running\n");
+		goto usbhsh_urb_enqueue_error_not_linked;
+	}
+
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret) {
+		dev_err(dev, "urb link failed\n");
+		goto usbhsh_urb_enqueue_error_not_linked;
+	}
+
+	/*
+	 * attach udev if needed
+	 * see [image of mod_host]
+	 */
+	if (!usbhsh_device_get(hpriv, urb)) {
+		new_udev = usbhsh_device_attach(hpriv, urb);
+		if (!new_udev) {
+			ret = -EIO;
+			dev_err(dev, "device attach failed\n");
+			goto usbhsh_urb_enqueue_error_not_linked;
+		}
+	}
+
+	/*
+	 * attach endpoint if needed
+	 * see [image of mod_host]
+	 */
+	if (!usbhsh_ep_to_uep(ep)) {
+		ret = usbhsh_endpoint_attach(hpriv, urb, mem_flags);
+		if (ret < 0) {
+			dev_err(dev, "endpoint attach failed\n");
+			goto usbhsh_urb_enqueue_error_free_device;
+		}
+	}
+
+	/*
+	 * attach pipe to endpoint
+	 * see [image of mod_host]
+	 */
+	ret = usbhsh_pipe_attach(hpriv, urb);
+	if (ret < 0) {
+		dev_err(dev, "pipe attach failed\n");
+		goto usbhsh_urb_enqueue_error_free_endpoint;
+	}
+
+	/*
+	 * push packet
+	 */
+	if (usb_pipecontrol(urb->pipe))
+		ret = usbhsh_dcp_queue_push(hcd, urb, mem_flags);
+	else
+		ret = usbhsh_queue_push(hcd, urb, mem_flags);
+
+	return ret;
+
+usbhsh_urb_enqueue_error_free_endpoint:
+	usbhsh_endpoint_detach(hpriv, ep);
+usbhsh_urb_enqueue_error_free_device:
+	if (new_udev)
+		usbhsh_device_detach(hpriv, new_udev);
+usbhsh_urb_enqueue_error_not_linked:
+
+	dev_dbg(dev, "%s error\n", __func__);
+
+	return ret;
+}
+
+static int usbhsh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
+	struct usbhsh_request *ureq = usbhsh_urb_to_ureq(urb);
+
+	if (ureq) {
+		struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+		struct usbhs_pkt *pkt = &ureq->pkt;
+
+		usbhs_pkt_pop(pkt->pipe, pkt);
+		usbhsh_queue_done(priv, pkt);
+	}
+
+	return 0;
+}
+
+static void usbhsh_endpoint_disable(struct usb_hcd *hcd,
+				    struct usb_host_endpoint *ep)
+{
+	struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep);
+	struct usbhsh_device *udev;
+	struct usbhsh_hpriv *hpriv;
+
+	/*
+	 * this function might be called manytimes by same hcd/ep
+	 * in-endpoint == out-endpoint if ep == dcp.
+	 */
+	if (!uep)
+		return;
+
+	udev	= usbhsh_uep_to_udev(uep);
+	hpriv	= usbhsh_hcd_to_hpriv(hcd);
+
+	usbhsh_endpoint_detach(hpriv, ep);
+
+	/*
+	 * if there is no endpoint,
+	 * free device
+	 */
+	if (!usbhsh_device_has_endpoint(udev))
+		usbhsh_device_detach(hpriv, udev);
+}
+
+static int usbhsh_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
+	int roothub_id = 1; /* only 1 root hub */
+
+	/*
+	 * does port stat was changed ?
+	 * check USB_PORT_STAT_C_xxx << 16
+	 */
+	if (usbhsh_port_stat_get(hpriv) & 0xFFFF0000)
+		*buf = (1 << roothub_id);
+	else
+		*buf = 0;
+
+	return !!(*buf);
+}
+
+static int __usbhsh_hub_hub_feature(struct usbhsh_hpriv *hpriv,
+				    u16 typeReq, u16 wValue,
+				    u16 wIndex, char *buf, u16 wLength)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	switch (wValue) {
+	case C_HUB_OVER_CURRENT:
+	case C_HUB_LOCAL_POWER:
+		dev_dbg(dev, "%s :: C_HUB_xx\n", __func__);
+		return 0;
+	}
+
+	return -EPIPE;
+}
+
+static int __usbhsh_hub_port_feature(struct usbhsh_hpriv *hpriv,
+				     u16 typeReq, u16 wValue,
+				     u16 wIndex, char *buf, u16 wLength)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int enable = (typeReq == SetPortFeature);
+	int speed, i, timeout = 128;
+	int roothub_id = 1; /* only 1 root hub */
+
+	/* common error */
+	if (wIndex > roothub_id || wLength != 0)
+		return -EPIPE;
+
+	/* check wValue */
+	switch (wValue) {
+	case USB_PORT_FEAT_POWER:
+		usbhs_vbus_ctrl(priv, enable);
+		dev_dbg(dev, "%s :: USB_PORT_FEAT_POWER\n", __func__);
+		break;
+
+	case USB_PORT_FEAT_ENABLE:
+	case USB_PORT_FEAT_SUSPEND:
+	case USB_PORT_FEAT_C_ENABLE:
+	case USB_PORT_FEAT_C_SUSPEND:
+	case USB_PORT_FEAT_C_CONNECTION:
+	case USB_PORT_FEAT_C_OVER_CURRENT:
+	case USB_PORT_FEAT_C_RESET:
+		dev_dbg(dev, "%s :: USB_PORT_FEAT_xxx\n", __func__);
+		break;
+
+	case USB_PORT_FEAT_RESET:
+		if (!enable)
+			break;
+
+		usbhsh_port_stat_clear(hpriv,
+				       USB_PORT_STAT_HIGH_SPEED |
+				       USB_PORT_STAT_LOW_SPEED);
+
+		usbhsh_queue_force_pop_all(priv);
+
+		usbhs_bus_send_reset(priv);
+		msleep(20);
+		usbhs_bus_send_sof_enable(priv);
+
+		for (i = 0; i < timeout ; i++) {
+			switch (usbhs_bus_get_speed(priv)) {
+			case USB_SPEED_LOW:
+				speed = USB_PORT_STAT_LOW_SPEED;
+				goto got_usb_bus_speed;
+			case USB_SPEED_HIGH:
+				speed = USB_PORT_STAT_HIGH_SPEED;
+				goto got_usb_bus_speed;
+			case USB_SPEED_FULL:
+				speed = 0;
+				goto got_usb_bus_speed;
+			}
+
+			msleep(20);
+		}
+		return -EPIPE;
+
+got_usb_bus_speed:
+		usbhsh_port_stat_set(hpriv, speed);
+		usbhsh_port_stat_set(hpriv, USB_PORT_STAT_ENABLE);
+
+		dev_dbg(dev, "%s :: USB_PORT_FEAT_RESET (speed = %d)\n",
+			__func__, speed);
+
+		/* status change is not needed */
+		return 0;
+
+	default:
+		return -EPIPE;
+	}
+
+	/* set/clear status */
+	if (enable)
+		usbhsh_port_stat_set(hpriv, (1 << wValue));
+	else
+		usbhsh_port_stat_clear(hpriv, (1 << wValue));
+
+	return 0;
+}
+
+static int __usbhsh_hub_get_status(struct usbhsh_hpriv *hpriv,
+				   u16 typeReq, u16 wValue,
+				   u16 wIndex, char *buf, u16 wLength)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int roothub_id = 1; /* only 1 root hub */
+
+	switch (typeReq) {
+	case GetHubStatus:
+		dev_dbg(dev, "%s :: GetHubStatus\n", __func__);
+
+		*buf = 0x00;
+		break;
+
+	case GetPortStatus:
+		if (wIndex != roothub_id)
+			return -EPIPE;
+
+		dev_dbg(dev, "%s :: GetPortStatus\n", __func__);
+		*(__le32 *)buf = cpu_to_le32(usbhsh_port_stat_get(hpriv));
+		break;
+
+	case GetHubDescriptor:
+		desc->bDescriptorType		= USB_DT_HUB;
+		desc->bHubContrCurrent		= 0;
+		desc->bNbrPorts			= roothub_id;
+		desc->bDescLength		= 9;
+		desc->bPwrOn2PwrGood		= 0;
+		desc->wHubCharacteristics	=
+			cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM);
+		desc->u.hs.DeviceRemovable[0]	= (roothub_id << 1);
+		desc->u.hs.DeviceRemovable[1]	= ~0;
+		dev_dbg(dev, "%s :: GetHubDescriptor\n", __func__);
+		break;
+	}
+
+	return 0;
+}
+
+static int usbhsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+			      u16 wIndex, char *buf, u16 wLength)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int ret = -EPIPE;
+
+	switch (typeReq) {
+
+	/* Hub Feature */
+	case ClearHubFeature:
+	case SetHubFeature:
+		ret = __usbhsh_hub_hub_feature(hpriv, typeReq,
+					       wValue, wIndex, buf, wLength);
+		break;
+
+	/* Port Feature */
+	case SetPortFeature:
+	case ClearPortFeature:
+		ret = __usbhsh_hub_port_feature(hpriv, typeReq,
+						wValue, wIndex, buf, wLength);
+		break;
+
+	/* Get status */
+	case GetHubStatus:
+	case GetPortStatus:
+	case GetHubDescriptor:
+		ret = __usbhsh_hub_get_status(hpriv, typeReq,
+					      wValue, wIndex, buf, wLength);
+		break;
+	}
+
+	dev_dbg(dev, "typeReq = %x, ret = %d, port_stat = %x\n",
+		typeReq, ret, usbhsh_port_stat_get(hpriv));
+
+	return ret;
+}
+
+static int usbhsh_bus_nop(struct usb_hcd *hcd)
+{
+	/* nothing to do */
+	return 0;
+}
+
+static const struct hc_driver usbhsh_driver = {
+	.description =		usbhsh_hcd_name,
+	.hcd_priv_size =	sizeof(struct usbhsh_hpriv),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.flags =		HCD_DMA | HCD_USB2,
+
+	.start =		usbhsh_host_start,
+	.stop =			usbhsh_host_stop,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		usbhsh_urb_enqueue,
+	.urb_dequeue =		usbhsh_urb_dequeue,
+	.endpoint_disable =	usbhsh_endpoint_disable,
+
+	/*
+	 * root hub
+	 */
+	.hub_status_data =	usbhsh_hub_status_data,
+	.hub_control =		usbhsh_hub_control,
+	.bus_suspend =		usbhsh_bus_nop,
+	.bus_resume =		usbhsh_bus_nop,
+};
+
+/*
+ *		interrupt functions
+ */
+static int usbhsh_irq_attch(struct usbhs_priv *priv,
+			    struct usbhs_irq_state *irq_state)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_dbg(dev, "device attached\n");
+
+	usbhsh_port_stat_set(hpriv, USB_PORT_STAT_CONNECTION);
+	usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);
+
+	/*
+	 * attch interrupt might happen infinitely on some device
+	 * (on self power USB hub ?)
+	 * disable it here.
+	 *
+	 * usbhsh_is_running() becomes effective
+	 * according to this process.
+	 * see
+	 *	usbhsh_is_running()
+	 *	usbhsh_urb_enqueue()
+	 */
+	hpriv->mod.irq_attch = NULL;
+	usbhs_irq_callback_update(priv, &hpriv->mod);
+
+	return 0;
+}
+
+static int usbhsh_irq_dtch(struct usbhs_priv *priv,
+			   struct usbhs_irq_state *irq_state)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_dbg(dev, "device detached\n");
+
+	usbhsh_port_stat_clear(hpriv, USB_PORT_STAT_CONNECTION);
+	usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);
+
+	/*
+	 * enable attch interrupt again
+	 *
+	 * usbhsh_is_running() becomes invalid
+	 * according to this process.
+	 * see
+	 *	usbhsh_is_running()
+	 *	usbhsh_urb_enqueue()
+	 */
+	hpriv->mod.irq_attch = usbhsh_irq_attch;
+	usbhs_irq_callback_update(priv, &hpriv->mod);
+
+	/*
+	 * usbhsh_queue_force_pop_all() should be called
+	 * after usbhsh_is_running() becomes invalid.
+	 */
+	usbhsh_queue_force_pop_all(priv);
+
+	return 0;
+}
+
+static int usbhsh_irq_setup_ack(struct usbhs_priv *priv,
+				struct usbhs_irq_state *irq_state)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_dbg(dev, "setup packet OK\n");
+
+	complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */
+
+	return 0;
+}
+
+static int usbhsh_irq_setup_err(struct usbhs_priv *priv,
+				struct usbhs_irq_state *irq_state)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_dbg(dev, "setup packet Err\n");
+
+	complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */
+
+	return 0;
+}
+
+/*
+ *		module start/stop
+ */
+static void usbhsh_pipe_init_for_host(struct usbhs_priv *priv)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct usbhs_pipe *pipe;
+	struct renesas_usbhs_driver_pipe_config *pipe_configs =
+					usbhs_get_dparam(priv, pipe_configs);
+	int pipe_size = usbhs_get_dparam(priv, pipe_size);
+	int old_type, dir_in, i;
+
+	/* init all pipe */
+	old_type = USB_ENDPOINT_XFER_CONTROL;
+	for (i = 0; i < pipe_size; i++) {
+
+		/*
+		 * data "output" will be finished as soon as possible,
+		 * but there is no guaranty at data "input" case.
+		 *
+		 * "input" needs "standby" pipe.
+		 * So, "input" direction pipe > "output" direction pipe
+		 * is good idea.
+		 *
+		 * 1st USB_ENDPOINT_XFER_xxx will be output direction,
+		 * and the other will be input direction here.
+		 *
+		 * ex)
+		 * ...
+		 * USB_ENDPOINT_XFER_ISOC -> dir out
+		 * USB_ENDPOINT_XFER_ISOC -> dir in
+		 * USB_ENDPOINT_XFER_BULK -> dir out
+		 * USB_ENDPOINT_XFER_BULK -> dir in
+		 * USB_ENDPOINT_XFER_BULK -> dir in
+		 * ...
+		 */
+		dir_in = (pipe_configs[i].type == old_type);
+		old_type = pipe_configs[i].type;
+
+		if (USB_ENDPOINT_XFER_CONTROL == pipe_configs[i].type) {
+			pipe = usbhs_dcp_malloc(priv);
+			usbhsh_hpriv_to_dcp(hpriv) = pipe;
+		} else {
+			pipe = usbhs_pipe_malloc(priv,
+						 pipe_configs[i].type,
+						 dir_in);
+		}
+
+		pipe->mod_private = NULL;
+	}
+}
+
+static int usbhsh_start(struct usbhs_priv *priv)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int ret;
+
+	/* add hcd */
+	ret = usb_add_hcd(hcd, 0, 0);
+	if (ret < 0)
+		return 0;
+	device_wakeup_enable(hcd->self.controller);
+
+	/*
+	 * pipe initialize and enable DCP
+	 */
+	usbhs_fifo_init(priv);
+	usbhs_pipe_init(priv,
+			usbhsh_dma_map_ctrl);
+	usbhsh_pipe_init_for_host(priv);
+
+	/*
+	 * system config enble
+	 * - HI speed
+	 * - host
+	 * - usb module
+	 */
+	usbhs_sys_host_ctrl(priv, 1);
+
+	/*
+	 * enable irq callback
+	 */
+	mod->irq_attch		= usbhsh_irq_attch;
+	mod->irq_dtch		= usbhsh_irq_dtch;
+	mod->irq_sack		= usbhsh_irq_setup_ack;
+	mod->irq_sign		= usbhsh_irq_setup_err;
+	usbhs_irq_callback_update(priv, mod);
+
+	dev_dbg(dev, "start host\n");
+
+	return ret;
+}
+
+static int usbhsh_stop(struct usbhs_priv *priv)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	/*
+	 * disable irq callback
+	 */
+	mod->irq_attch	= NULL;
+	mod->irq_dtch	= NULL;
+	mod->irq_sack	= NULL;
+	mod->irq_sign	= NULL;
+	usbhs_irq_callback_update(priv, mod);
+
+	usb_remove_hcd(hcd);
+
+	/* disable sys */
+	usbhs_sys_host_ctrl(priv, 0);
+
+	dev_dbg(dev, "quit host\n");
+
+	return 0;
+}
+
+int usbhs_mod_host_probe(struct usbhs_priv *priv)
+{
+	struct usbhsh_hpriv *hpriv;
+	struct usb_hcd *hcd;
+	struct usbhsh_device *udev;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int i;
+
+	/* initialize hcd */
+	hcd = usb_create_hcd(&usbhsh_driver, dev, usbhsh_hcd_name);
+	if (!hcd) {
+		dev_err(dev, "Failed to create hcd\n");
+		return -ENOMEM;
+	}
+	hcd->has_tt = 1; /* for low/full speed */
+
+	/*
+	 * CAUTION
+	 *
+	 * There is no guarantee that it is possible to access usb module here.
+	 * Don't accesses to it.
+	 * The accesse will be enable after "usbhsh_start"
+	 */
+
+	hpriv = usbhsh_hcd_to_hpriv(hcd);
+
+	/*
+	 * register itself
+	 */
+	usbhs_mod_register(priv, &hpriv->mod, USBHS_HOST);
+
+	/* init hpriv */
+	hpriv->mod.name		= "host";
+	hpriv->mod.start	= usbhsh_start;
+	hpriv->mod.stop		= usbhsh_stop;
+	usbhsh_port_stat_init(hpriv);
+
+	/* init all device */
+	usbhsh_for_each_udev_with_dev0(udev, hpriv, i) {
+		udev->usbv	= NULL;
+		INIT_LIST_HEAD(&udev->ep_list_head);
+	}
+
+	dev_info(dev, "host probed\n");
+
+	return 0;
+}
+
+int usbhs_mod_host_remove(struct usbhs_priv *priv)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c
new file mode 100644
index 000000000..75fff2e4c
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -0,0 +1,851 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include "common.h"
+#include "pipe.h"
+
+/*
+ *		macros
+ */
+#define usbhsp_addr_offset(p)	((usbhs_pipe_number(p) - 1) * 2)
+
+#define usbhsp_flags_set(p, f)	((p)->flags |=  USBHS_PIPE_FLAGS_##f)
+#define usbhsp_flags_clr(p, f)	((p)->flags &= ~USBHS_PIPE_FLAGS_##f)
+#define usbhsp_flags_has(p, f)	((p)->flags &   USBHS_PIPE_FLAGS_##f)
+#define usbhsp_flags_init(p)	do {(p)->flags = 0; } while (0)
+
+/*
+ * for debug
+ */
+static char *usbhsp_pipe_name[] = {
+	[USB_ENDPOINT_XFER_CONTROL]	= "DCP",
+	[USB_ENDPOINT_XFER_BULK]	= "BULK",
+	[USB_ENDPOINT_XFER_INT]		= "INT",
+	[USB_ENDPOINT_XFER_ISOC]	= "ISO",
+};
+
+char *usbhs_pipe_name(struct usbhs_pipe *pipe)
+{
+	return usbhsp_pipe_name[usbhs_pipe_type(pipe)];
+}
+
+static struct renesas_usbhs_driver_pipe_config
+*usbhsp_get_pipe_config(struct usbhs_priv *priv, int pipe_num)
+{
+	struct renesas_usbhs_driver_pipe_config *pipe_configs =
+					usbhs_get_dparam(priv, pipe_configs);
+
+	return &pipe_configs[pipe_num];
+}
+
+/*
+ *		DCPCTR/PIPEnCTR functions
+ */
+static void usbhsp_pipectrl_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	int offset = usbhsp_addr_offset(pipe);
+
+	if (usbhs_pipe_is_dcp(pipe))
+		usbhs_bset(priv, DCPCTR, mask, val);
+	else
+		usbhs_bset(priv, PIPEnCTR + offset, mask, val);
+}
+
+static u16 usbhsp_pipectrl_get(struct usbhs_pipe *pipe)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	int offset = usbhsp_addr_offset(pipe);
+
+	if (usbhs_pipe_is_dcp(pipe))
+		return usbhs_read(priv, DCPCTR);
+	else
+		return usbhs_read(priv, PIPEnCTR + offset);
+}
+
+/*
+ *		DCP/PIPE functions
+ */
+static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe,
+				  u16 dcp_reg, u16 pipe_reg,
+				  u16 mask, u16 val)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	if (usbhs_pipe_is_dcp(pipe))
+		usbhs_bset(priv, dcp_reg, mask, val);
+	else
+		usbhs_bset(priv, pipe_reg, mask, val);
+}
+
+static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe,
+				 u16 dcp_reg, u16 pipe_reg)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	if (usbhs_pipe_is_dcp(pipe))
+		return usbhs_read(priv, dcp_reg);
+	else
+		return usbhs_read(priv, pipe_reg);
+}
+
+/*
+ *		DCPCFG/PIPECFG functions
+ */
+static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
+{
+	__usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val);
+}
+
+static u16 usbhsp_pipe_cfg_get(struct usbhs_pipe *pipe)
+{
+	return __usbhsp_pipe_xxx_get(pipe, DCPCFG, PIPECFG);
+}
+
+/*
+ *		PIPEnTRN/PIPEnTRE functions
+ */
+static void usbhsp_pipe_trn_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int num = usbhs_pipe_number(pipe);
+	u16 reg;
+
+	/*
+	 * It is impossible to calculate address,
+	 * since PIPEnTRN addresses were mapped randomly.
+	 */
+#define CASE_PIPExTRN(a)		\
+	case 0x ## a:			\
+		reg = PIPE ## a ## TRN;	\
+		break;
+
+	switch (num) {
+	CASE_PIPExTRN(1);
+	CASE_PIPExTRN(2);
+	CASE_PIPExTRN(3);
+	CASE_PIPExTRN(4);
+	CASE_PIPExTRN(5);
+	CASE_PIPExTRN(B);
+	CASE_PIPExTRN(C);
+	CASE_PIPExTRN(D);
+	CASE_PIPExTRN(E);
+	CASE_PIPExTRN(F);
+	CASE_PIPExTRN(9);
+	CASE_PIPExTRN(A);
+	default:
+		dev_err(dev, "unknown pipe (%d)\n", num);
+		return;
+	}
+	__usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val);
+}
+
+static void usbhsp_pipe_tre_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int num = usbhs_pipe_number(pipe);
+	u16 reg;
+
+	/*
+	 * It is impossible to calculate address,
+	 * since PIPEnTRE addresses were mapped randomly.
+	 */
+#define CASE_PIPExTRE(a)			\
+	case 0x ## a:				\
+		reg = PIPE ## a ## TRE;		\
+		break;
+
+	switch (num) {
+	CASE_PIPExTRE(1);
+	CASE_PIPExTRE(2);
+	CASE_PIPExTRE(3);
+	CASE_PIPExTRE(4);
+	CASE_PIPExTRE(5);
+	CASE_PIPExTRE(B);
+	CASE_PIPExTRE(C);
+	CASE_PIPExTRE(D);
+	CASE_PIPExTRE(E);
+	CASE_PIPExTRE(F);
+	CASE_PIPExTRE(9);
+	CASE_PIPExTRE(A);
+	default:
+		dev_err(dev, "unknown pipe (%d)\n", num);
+		return;
+	}
+
+	__usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val);
+}
+
+/*
+ *		PIPEBUF
+ */
+static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
+{
+	if (usbhs_pipe_is_dcp(pipe))
+		return;
+
+	__usbhsp_pipe_xxx_set(pipe, 0, PIPEBUF, mask, val);
+}
+
+/*
+ *		DCPMAXP/PIPEMAXP
+ */
+static void usbhsp_pipe_maxp_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
+{
+	__usbhsp_pipe_xxx_set(pipe, DCPMAXP, PIPEMAXP, mask, val);
+}
+
+/*
+ *		pipe control functions
+ */
+static void usbhsp_pipe_select(struct usbhs_pipe *pipe)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	/*
+	 * On pipe, this is necessary before
+	 * accesses to below registers.
+	 *
+	 * PIPESEL	: usbhsp_pipe_select
+	 * PIPECFG	: usbhsp_pipe_cfg_xxx
+	 * PIPEBUF	: usbhsp_pipe_buf_xxx
+	 * PIPEMAXP	: usbhsp_pipe_maxp_xxx
+	 * PIPEPERI
+	 */
+
+	/*
+	 * if pipe is dcp, no pipe is selected.
+	 * it is no problem, because dcp have its register
+	 */
+	usbhs_write(priv, PIPESEL, 0xF & usbhs_pipe_number(pipe));
+}
+
+static int usbhsp_pipe_barrier(struct usbhs_pipe *pipe)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	int timeout = 1024;
+	u16 mask = usbhs_mod_is_host(priv) ? (CSSTS | PID_MASK) : PID_MASK;
+
+	/*
+	 * make sure....
+	 *
+	 * Modify these bits when CSSTS = 0, PID = NAK, and no pipe number is
+	 * specified by the CURPIPE bits.
+	 * When changing the setting of this bit after changing
+	 * the PID bits for the selected pipe from BUF to NAK,
+	 * check that CSSTS = 0 and PBUSY = 0.
+	 */
+
+	/*
+	 * CURPIPE bit = 0
+	 *
+	 * see also
+	 *  "Operation"
+	 *  - "Pipe Control"
+	 *   - "Pipe Control Registers Switching Procedure"
+	 */
+	usbhs_write(priv, CFIFOSEL, 0);
+	usbhs_pipe_disable(pipe);
+
+	do {
+		if (!(usbhsp_pipectrl_get(pipe) & mask))
+			return 0;
+
+		udelay(10);
+
+	} while (timeout--);
+
+	return -EBUSY;
+}
+
+int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe)
+{
+	u16 val;
+
+	val = usbhsp_pipectrl_get(pipe);
+	if (val & BSTS)
+		return 0;
+
+	return -EBUSY;
+}
+
+bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe)
+{
+	u16 val;
+
+	/* Do not support for DCP pipe */
+	if (usbhs_pipe_is_dcp(pipe))
+		return false;
+
+	val = usbhsp_pipectrl_get(pipe);
+	if (val & INBUFM)
+		return true;
+
+	return false;
+}
+
+/*
+ *		PID ctrl
+ */
+static void __usbhsp_pid_try_nak_if_stall(struct usbhs_pipe *pipe)
+{
+	u16 pid = usbhsp_pipectrl_get(pipe);
+
+	pid &= PID_MASK;
+
+	/*
+	 * see
+	 * "Pipe n Control Register" - "PID"
+	 */
+	switch (pid) {
+	case PID_STALL11:
+		usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10);
+		fallthrough;
+	case PID_STALL10:
+		usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK);
+	}
+}
+
+void usbhs_pipe_disable(struct usbhs_pipe *pipe)
+{
+	int timeout = 1024;
+	u16 val;
+
+	/* see "Pipe n Control Register" - "PID" */
+	__usbhsp_pid_try_nak_if_stall(pipe);
+
+	usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK);
+
+	do {
+		val  = usbhsp_pipectrl_get(pipe);
+		val &= PBUSY;
+		if (!val)
+			break;
+
+		udelay(10);
+	} while (timeout--);
+}
+
+void usbhs_pipe_enable(struct usbhs_pipe *pipe)
+{
+	/* see "Pipe n Control Register" - "PID" */
+	__usbhsp_pid_try_nak_if_stall(pipe);
+
+	usbhsp_pipectrl_set(pipe, PID_MASK, PID_BUF);
+}
+
+void usbhs_pipe_stall(struct usbhs_pipe *pipe)
+{
+	u16 pid = usbhsp_pipectrl_get(pipe);
+
+	pid &= PID_MASK;
+
+	/*
+	 * see
+	 * "Pipe n Control Register" - "PID"
+	 */
+	switch (pid) {
+	case PID_NAK:
+		usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10);
+		break;
+	case PID_BUF:
+		usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL11);
+		break;
+	}
+}
+
+int usbhs_pipe_is_stall(struct usbhs_pipe *pipe)
+{
+	u16 pid = usbhsp_pipectrl_get(pipe) & PID_MASK;
+
+	return (int)(pid == PID_STALL10 || pid == PID_STALL11);
+}
+
+void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len)
+{
+	if (!usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
+		return;
+
+	/*
+	 * clear and disable transfer counter for IN/OUT pipe
+	 */
+	usbhsp_pipe_tre_set(pipe, TRCLR | TRENB, TRCLR);
+
+	/*
+	 * Only IN direction bulk pipe can use transfer count.
+	 * Without using this function,
+	 * received data will break if it was large data size.
+	 * see PIPEnTRN/PIPEnTRE for detail
+	 */
+	if (usbhs_pipe_is_dir_in(pipe)) {
+		int maxp = usbhs_pipe_get_maxpacket(pipe);
+
+		usbhsp_pipe_trn_set(pipe, 0xffff, DIV_ROUND_UP(len, maxp));
+		usbhsp_pipe_tre_set(pipe, TRENB, TRENB); /* enable */
+	}
+}
+
+
+/*
+ *		pipe setup
+ */
+static int usbhsp_setup_pipecfg(struct usbhs_pipe *pipe, int is_host,
+				int dir_in, u16 *pipecfg)
+{
+	u16 type = 0;
+	u16 bfre = 0;
+	u16 dblb = 0;
+	u16 cntmd = 0;
+	u16 dir = 0;
+	u16 epnum = 0;
+	u16 shtnak = 0;
+	static const u16 type_array[] = {
+		[USB_ENDPOINT_XFER_BULK] = TYPE_BULK,
+		[USB_ENDPOINT_XFER_INT]  = TYPE_INT,
+		[USB_ENDPOINT_XFER_ISOC] = TYPE_ISO,
+	};
+
+	if (usbhs_pipe_is_dcp(pipe))
+		return -EINVAL;
+
+	/*
+	 * PIPECFG
+	 *
+	 * see
+	 *  - "Register Descriptions" - "PIPECFG" register
+	 *  - "Features"  - "Pipe configuration"
+	 *  - "Operation" - "Pipe Control"
+	 */
+
+	/* TYPE */
+	type = type_array[usbhs_pipe_type(pipe)];
+
+	/* BFRE */
+	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) ||
+	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
+		bfre = 0; /* FIXME */
+
+	/* DBLB: see usbhs_pipe_config_update() */
+
+	/* CNTMD */
+	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
+		cntmd = 0; /* FIXME */
+
+	/* DIR */
+	if (dir_in)
+		usbhsp_flags_set(pipe, IS_DIR_HOST);
+
+	if (!!is_host ^ !!dir_in)
+		dir |= DIR_OUT;
+
+	if (!dir)
+		usbhsp_flags_set(pipe, IS_DIR_IN);
+
+	/* SHTNAK */
+	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) &&
+	    !dir)
+		shtnak = SHTNAK;
+
+	/* EPNUM */
+	epnum = 0; /* see usbhs_pipe_config_update() */
+	*pipecfg = type		|
+		   bfre		|
+		   dblb		|
+		   cntmd	|
+		   dir		|
+		   shtnak	|
+		   epnum;
+	return 0;
+}
+
+static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int pipe_num = usbhs_pipe_number(pipe);
+	u16 buff_size;
+	u16 bufnmb;
+	u16 bufnmb_cnt;
+	struct renesas_usbhs_driver_pipe_config *pipe_config =
+					usbhsp_get_pipe_config(priv, pipe_num);
+
+	/*
+	 * PIPEBUF
+	 *
+	 * see
+	 *  - "Register Descriptions" - "PIPEBUF" register
+	 *  - "Features"  - "Pipe configuration"
+	 *  - "Operation" - "FIFO Buffer Memory"
+	 *  - "Operation" - "Pipe Control"
+	 */
+	buff_size = pipe_config->bufsize;
+	bufnmb = pipe_config->bufnum;
+
+	/* change buff_size to register value */
+	bufnmb_cnt = (buff_size / 64) - 1;
+
+	dev_dbg(dev, "pipe : %d : buff_size 0x%x: bufnmb 0x%x\n",
+		pipe_num, buff_size, bufnmb);
+
+	return	(0x1f & bufnmb_cnt)	<< 10 |
+		(0xff & bufnmb)		<<  0;
+}
+
+void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel,
+			      u16 epnum, u16 maxp)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	int pipe_num = usbhs_pipe_number(pipe);
+	struct renesas_usbhs_driver_pipe_config *pipe_config =
+					usbhsp_get_pipe_config(priv, pipe_num);
+	u16 dblb = pipe_config->double_buf ? DBLB : 0;
+
+	if (devsel > 0xA) {
+		struct device *dev = usbhs_priv_to_dev(priv);
+
+		dev_err(dev, "devsel error %d\n", devsel);
+
+		devsel = 0;
+	}
+
+	usbhsp_pipe_barrier(pipe);
+
+	pipe->maxp = maxp;
+
+	usbhsp_pipe_select(pipe);
+	usbhsp_pipe_maxp_set(pipe, 0xFFFF,
+			     (devsel << 12) |
+			     maxp);
+
+	if (!usbhs_pipe_is_dcp(pipe))
+		usbhsp_pipe_cfg_set(pipe,  0x000F | DBLB, epnum | dblb);
+}
+
+/*
+ *		pipe control
+ */
+int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe)
+{
+	/*
+	 * see
+	 *	usbhs_pipe_config_update()
+	 *	usbhs_dcp_malloc()
+	 */
+	return pipe->maxp;
+}
+
+int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe)
+{
+	return usbhsp_flags_has(pipe, IS_DIR_IN);
+}
+
+int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe)
+{
+	return usbhsp_flags_has(pipe, IS_DIR_HOST);
+}
+
+int usbhs_pipe_is_running(struct usbhs_pipe *pipe)
+{
+	return usbhsp_flags_has(pipe, IS_RUNNING);
+}
+
+void usbhs_pipe_running(struct usbhs_pipe *pipe, int running)
+{
+	if (running)
+		usbhsp_flags_set(pipe, IS_RUNNING);
+	else
+		usbhsp_flags_clr(pipe, IS_RUNNING);
+}
+
+void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int sequence)
+{
+	u16 mask = (SQCLR | SQSET);
+	u16 val;
+
+	/*
+	 * sequence
+	 *  0  : data0
+	 *  1  : data1
+	 *  -1 : no change
+	 */
+	switch (sequence) {
+	case 0:
+		val = SQCLR;
+		break;
+	case 1:
+		val = SQSET;
+		break;
+	default:
+		return;
+	}
+
+	usbhsp_pipectrl_set(pipe, mask, val);
+}
+
+static int usbhs_pipe_get_data_sequence(struct usbhs_pipe *pipe)
+{
+	return !!(usbhsp_pipectrl_get(pipe) & SQMON);
+}
+
+void usbhs_pipe_clear(struct usbhs_pipe *pipe)
+{
+	if (usbhs_pipe_is_dcp(pipe)) {
+		usbhs_fifo_clear_dcp(pipe);
+	} else {
+		usbhsp_pipectrl_set(pipe, ACLRM, ACLRM);
+		usbhsp_pipectrl_set(pipe, ACLRM, 0);
+	}
+}
+
+/* Should call usbhsp_pipe_select() before */
+void usbhs_pipe_clear_without_sequence(struct usbhs_pipe *pipe,
+				       int needs_bfre, int bfre_enable)
+{
+	int sequence;
+
+	usbhsp_pipe_select(pipe);
+	sequence = usbhs_pipe_get_data_sequence(pipe);
+	if (needs_bfre)
+		usbhsp_pipe_cfg_set(pipe, BFRE, bfre_enable ? BFRE : 0);
+	usbhs_pipe_clear(pipe);
+	usbhs_pipe_data_sequence(pipe, sequence);
+}
+
+void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable)
+{
+	if (usbhs_pipe_is_dcp(pipe))
+		return;
+
+	usbhsp_pipe_select(pipe);
+	/* check if the driver needs to change the BFRE value */
+	if (!(enable ^ !!(usbhsp_pipe_cfg_get(pipe) & BFRE)))
+		return;
+
+	usbhs_pipe_clear_without_sequence(pipe, 1, enable);
+}
+
+static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type)
+{
+	struct usbhs_pipe *pos, *pipe;
+	int i;
+
+	/*
+	 * find target pipe
+	 */
+	pipe = NULL;
+	usbhs_for_each_pipe_with_dcp(pos, priv, i) {
+		if (!usbhs_pipe_type_is(pos, type))
+			continue;
+		if (usbhsp_flags_has(pos, IS_USED))
+			continue;
+
+		pipe = pos;
+		break;
+	}
+
+	if (!pipe)
+		return NULL;
+
+	/*
+	 * initialize pipe flags
+	 */
+	usbhsp_flags_init(pipe);
+	usbhsp_flags_set(pipe, IS_USED);
+
+	return pipe;
+}
+
+static void usbhsp_put_pipe(struct usbhs_pipe *pipe)
+{
+	usbhsp_flags_init(pipe);
+}
+
+void usbhs_pipe_init(struct usbhs_priv *priv,
+		     int (*dma_map_ctrl)(struct device *dma_dev,
+					 struct usbhs_pkt *pkt, int map))
+{
+	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
+	struct usbhs_pipe *pipe;
+	int i;
+
+	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
+		usbhsp_flags_init(pipe);
+		pipe->fifo = NULL;
+		pipe->mod_private = NULL;
+		INIT_LIST_HEAD(&pipe->list);
+
+		/* pipe force init */
+		usbhs_pipe_clear(pipe);
+	}
+
+	info->dma_map_ctrl = dma_map_ctrl;
+}
+
+struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv,
+				     int endpoint_type,
+				     int dir_in)
+{
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct usbhs_pipe *pipe;
+	int is_host = usbhs_mod_is_host(priv);
+	int ret;
+	u16 pipecfg, pipebuf;
+
+	pipe = usbhsp_get_pipe(priv, endpoint_type);
+	if (!pipe) {
+		dev_err(dev, "can't get pipe (%s)\n",
+			usbhsp_pipe_name[endpoint_type]);
+		return NULL;
+	}
+
+	INIT_LIST_HEAD(&pipe->list);
+
+	usbhs_pipe_disable(pipe);
+
+	/* make sure pipe is not busy */
+	ret = usbhsp_pipe_barrier(pipe);
+	if (ret < 0) {
+		dev_err(dev, "pipe setup failed %d\n", usbhs_pipe_number(pipe));
+		return NULL;
+	}
+
+	if (usbhsp_setup_pipecfg(pipe, is_host, dir_in, &pipecfg)) {
+		dev_err(dev, "can't setup pipe\n");
+		return NULL;
+	}
+
+	pipebuf  = usbhsp_setup_pipebuff(pipe);
+
+	usbhsp_pipe_select(pipe);
+	usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg);
+	usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf);
+	usbhs_pipe_clear(pipe);
+
+	usbhs_pipe_sequence_data0(pipe);
+
+	dev_dbg(dev, "enable pipe %d : %s (%s)\n",
+		usbhs_pipe_number(pipe),
+		usbhs_pipe_name(pipe),
+		usbhs_pipe_is_dir_in(pipe) ? "in" : "out");
+
+	/*
+	 * epnum / maxp are still not set to this pipe.
+	 * call usbhs_pipe_config_update() after this function !!
+	 */
+
+	return pipe;
+}
+
+void usbhs_pipe_free(struct usbhs_pipe *pipe)
+{
+	usbhsp_pipe_select(pipe);
+	usbhsp_pipe_cfg_set(pipe, 0xFFFF, 0);
+	usbhsp_put_pipe(pipe);
+}
+
+void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo)
+{
+	if (pipe->fifo)
+		pipe->fifo->pipe = NULL;
+
+	pipe->fifo = fifo;
+
+	if (fifo)
+		fifo->pipe = pipe;
+}
+
+
+/*
+ *		dcp control
+ */
+struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv)
+{
+	struct usbhs_pipe *pipe;
+
+	pipe = usbhsp_get_pipe(priv, USB_ENDPOINT_XFER_CONTROL);
+	if (!pipe)
+		return NULL;
+
+	INIT_LIST_HEAD(&pipe->list);
+
+	/*
+	 * call usbhs_pipe_config_update() after this function !!
+	 */
+
+	return pipe;
+}
+
+void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	WARN_ON(!usbhs_pipe_is_dcp(pipe));
+
+	usbhs_pipe_enable(pipe);
+
+	if (!usbhs_mod_is_host(priv)) /* funconly */
+		usbhsp_pipectrl_set(pipe, CCPL, CCPL);
+}
+
+void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out)
+{
+	usbhsp_pipe_cfg_set(pipe, DIR_OUT,
+			    dir_out ? DIR_OUT : 0);
+}
+
+/*
+ *		pipe module function
+ */
+int usbhs_pipe_probe(struct usbhs_priv *priv)
+{
+	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
+	struct usbhs_pipe *pipe;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct renesas_usbhs_driver_pipe_config *pipe_configs =
+					usbhs_get_dparam(priv, pipe_configs);
+	int pipe_size = usbhs_get_dparam(priv, pipe_size);
+	int i;
+
+	/* This driver expects 1st pipe is DCP */
+	if (pipe_configs[0].type != USB_ENDPOINT_XFER_CONTROL) {
+		dev_err(dev, "1st PIPE is not DCP\n");
+		return -EINVAL;
+	}
+
+	info->pipe = kcalloc(pipe_size, sizeof(struct usbhs_pipe),
+			     GFP_KERNEL);
+	if (!info->pipe)
+		return -ENOMEM;
+
+	info->size = pipe_size;
+
+	/*
+	 * init pipe
+	 */
+	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
+		pipe->priv = priv;
+
+		usbhs_pipe_type(pipe) =
+			pipe_configs[i].type & USB_ENDPOINT_XFERTYPE_MASK;
+
+		dev_dbg(dev, "pipe %x\t: %s\n",
+			i, usbhsp_pipe_name[pipe_configs[i].type]);
+	}
+
+	return 0;
+}
+
+void usbhs_pipe_remove(struct usbhs_priv *priv)
+{
+	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
+
+	kfree(info->pipe);
+}
diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h
new file mode 100644
index 000000000..a4ae9f97d
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/pipe.h
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-1.0+ */
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#ifndef RENESAS_USB_PIPE_H
+#define RENESAS_USB_PIPE_H
+
+#include "common.h"
+#include "fifo.h"
+
+/*
+ *	struct
+ */
+struct usbhs_pipe {
+	u32 pipe_type;	/* USB_ENDPOINT_XFER_xxx */
+
+	struct usbhs_priv *priv;
+	struct usbhs_fifo *fifo;
+	struct list_head list;
+
+	int maxp;
+
+	u32 flags;
+#define USBHS_PIPE_FLAGS_IS_USED		(1 << 0)
+#define USBHS_PIPE_FLAGS_IS_DIR_IN		(1 << 1)
+#define USBHS_PIPE_FLAGS_IS_DIR_HOST		(1 << 2)
+#define USBHS_PIPE_FLAGS_IS_RUNNING		(1 << 3)
+
+	const struct usbhs_pkt_handle *handler;
+
+	void *mod_private;
+};
+
+struct usbhs_pipe_info {
+	struct usbhs_pipe *pipe;
+	int size;	/* array size of "pipe" */
+
+	int (*dma_map_ctrl)(struct device *dma_dev, struct usbhs_pkt *pkt,
+			    int map);
+};
+
+/*
+ * pipe list
+ */
+#define __usbhs_for_each_pipe(start, pos, info, i)	\
+	for ((i) = start;						\
+	     ((i) < (info)->size) && ((pos) = (info)->pipe + (i));	\
+	     (i)++)
+
+#define usbhs_for_each_pipe(pos, priv, i)			\
+	__usbhs_for_each_pipe(1, pos, &((priv)->pipe_info), i)
+
+#define usbhs_for_each_pipe_with_dcp(pos, priv, i)		\
+	__usbhs_for_each_pipe(0, pos, &((priv)->pipe_info), i)
+
+/*
+ * data
+ */
+#define usbhs_priv_to_pipeinfo(pr)	(&(pr)->pipe_info)
+
+/*
+ * pipe control
+ */
+char *usbhs_pipe_name(struct usbhs_pipe *pipe);
+struct usbhs_pipe
+*usbhs_pipe_malloc(struct usbhs_priv *priv, int endpoint_type, int dir_in);
+void usbhs_pipe_free(struct usbhs_pipe *pipe);
+int usbhs_pipe_probe(struct usbhs_priv *priv);
+void usbhs_pipe_remove(struct usbhs_priv *priv);
+int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe);
+int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe);
+int usbhs_pipe_is_running(struct usbhs_pipe *pipe);
+void usbhs_pipe_running(struct usbhs_pipe *pipe, int running);
+
+void usbhs_pipe_init(struct usbhs_priv *priv,
+		     int (*dma_map_ctrl)(struct device *dma_dev,
+					 struct usbhs_pkt *pkt, int map));
+int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe);
+void usbhs_pipe_clear(struct usbhs_pipe *pipe);
+void usbhs_pipe_clear_without_sequence(struct usbhs_pipe *pipe,
+				       int needs_bfre, int bfre_enable);
+int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe);
+bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe);
+void usbhs_pipe_enable(struct usbhs_pipe *pipe);
+void usbhs_pipe_disable(struct usbhs_pipe *pipe);
+void usbhs_pipe_stall(struct usbhs_pipe *pipe);
+int usbhs_pipe_is_stall(struct usbhs_pipe *pipe);
+void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len);
+void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo);
+void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel,
+			      u16 epnum, u16 maxp);
+void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable);
+
+#define usbhs_pipe_sequence_data0(pipe)	usbhs_pipe_data_sequence(pipe, 0)
+#define usbhs_pipe_sequence_data1(pipe)	usbhs_pipe_data_sequence(pipe, 1)
+void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int data);
+
+#define usbhs_pipe_to_priv(p)	((p)->priv)
+#define usbhs_pipe_number(p)	(int)((p) - (p)->priv->pipe_info.pipe)
+#define usbhs_pipe_is_dcp(p)	((p)->priv->pipe_info.pipe == (p))
+#define usbhs_pipe_to_fifo(p)	((p)->fifo)
+#define usbhs_pipe_is_busy(p)	usbhs_pipe_to_fifo(p)
+
+#define usbhs_pipe_type(p)		((p)->pipe_type)
+#define usbhs_pipe_type_is(p, t)	((p)->pipe_type == t)
+
+/*
+ * dcp control
+ */
+struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv);
+void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe);
+void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out);
+
+#endif /* RENESAS_USB_PIPE_H */
diff --git a/drivers/usb/renesas_usbhs/rcar2.c b/drivers/usb/renesas_usbhs/rcar2.c
new file mode 100644
index 000000000..52756fc2a
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/rcar2.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Renesas USB driver R-Car Gen. 2 initialization and power control
+ *
+ * Copyright (C) 2014 Ulrich Hecht
+ * Copyright (C) 2019 Renesas Electronics Corporation
+ */
+
+#include <linux/phy/phy.h>
+#include "common.h"
+#include "rcar2.h"
+
+static int usbhs_rcar2_hardware_init(struct platform_device *pdev)
+{
+	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
+
+	if (IS_ENABLED(CONFIG_GENERIC_PHY)) {
+		struct phy *phy = phy_get(&pdev->dev, "usb");
+
+		if (IS_ERR(phy))
+			return PTR_ERR(phy);
+
+		priv->phy = phy;
+		return 0;
+	}
+
+	return -ENXIO;
+}
+
+static int usbhs_rcar2_hardware_exit(struct platform_device *pdev)
+{
+	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
+
+	if (priv->phy) {
+		phy_put(&pdev->dev, priv->phy);
+		priv->phy = NULL;
+	}
+
+	return 0;
+}
+
+static int usbhs_rcar2_power_ctrl(struct platform_device *pdev,
+				void __iomem *base, int enable)
+{
+	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
+	int retval = -ENODEV;
+
+	if (priv->phy) {
+		if (enable) {
+			retval = phy_init(priv->phy);
+
+			if (!retval)
+				retval = phy_power_on(priv->phy);
+		} else {
+			phy_power_off(priv->phy);
+			phy_exit(priv->phy);
+			retval = 0;
+		}
+	}
+
+	return retval;
+}
+
+const struct renesas_usbhs_platform_info usbhs_rcar_gen2_plat_info = {
+	.platform_callback = {
+		.hardware_init = usbhs_rcar2_hardware_init,
+		.hardware_exit = usbhs_rcar2_hardware_exit,
+		.power_ctrl = usbhs_rcar2_power_ctrl,
+		.get_id = usbhs_get_id_as_gadget,
+	},
+	.driver_param = {
+		.has_usb_dmac = 1,
+		.has_new_pipe_configs = 1,
+	},
+};
diff --git a/drivers/usb/renesas_usbhs/rcar2.h b/drivers/usb/renesas_usbhs/rcar2.h
new file mode 100644
index 000000000..046d07edb
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/rcar2.h
@@ -0,0 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include "common.h"
+
+extern const struct renesas_usbhs_platform_info usbhs_rcar_gen2_plat_info;
diff --git a/drivers/usb/renesas_usbhs/rcar3.c b/drivers/usb/renesas_usbhs/rcar3.c
new file mode 100644
index 000000000..c181b2a0b
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/rcar3.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas USB driver R-Car Gen. 3 initialization and power control
+ *
+ * Copyright (C) 2016-2019 Renesas Electronics Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include "common.h"
+#include "rcar3.h"
+
+#define LPSTS		0x102
+#define UGCTRL		0x180	/* 32-bit register */
+#define UGCTRL2		0x184	/* 32-bit register */
+#define UGSTS		0x188	/* 32-bit register */
+
+/* Low Power Status register (LPSTS) */
+#define LPSTS_SUSPM	0x4000
+
+/* R-Car D3 only: USB General control register (UGCTRL) */
+#define UGCTRL_PLLRESET		0x00000001
+#define UGCTRL_CONNECT		0x00000004
+
+/*
+ * USB General control register 2 (UGCTRL2)
+ * Remarks: bit[31:11] and bit[9:6] should be 0
+ */
+#define UGCTRL2_RESERVED_3	0x00000001	/* bit[3:0] should be B'0001 */
+#define UGCTRL2_USB0SEL_HSUSB	0x00000020
+#define UGCTRL2_USB0SEL_OTG	0x00000030
+#define UGCTRL2_VBUSSEL		0x00000400
+
+/* R-Car D3 only: USB General status register (UGSTS) */
+#define UGSTS_LOCK		0x00000100
+
+static void usbhs_write32(struct usbhs_priv *priv, u32 reg, u32 data)
+{
+	iowrite32(data, priv->base + reg);
+}
+
+static u32 usbhs_read32(struct usbhs_priv *priv, u32 reg)
+{
+	return ioread32(priv->base + reg);
+}
+
+static void usbhs_rcar3_set_ugctrl2(struct usbhs_priv *priv, u32 val)
+{
+	usbhs_write32(priv, UGCTRL2, val | UGCTRL2_RESERVED_3);
+}
+
+static int usbhs_rcar3_power_ctrl(struct platform_device *pdev,
+				void __iomem *base, int enable)
+{
+	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
+
+	usbhs_rcar3_set_ugctrl2(priv, UGCTRL2_USB0SEL_OTG | UGCTRL2_VBUSSEL);
+
+	if (enable) {
+		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
+		/* The controller on R-Car Gen3 needs to wait up to 45 usec */
+		usleep_range(45, 90);
+	} else {
+		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, 0);
+	}
+
+	return 0;
+}
+
+/* R-Car D3 needs to release UGCTRL.PLLRESET */
+static int usbhs_rcar3_power_and_pll_ctrl(struct platform_device *pdev,
+					  void __iomem *base, int enable)
+{
+	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
+	u32 val;
+	int timeout = 1000;
+
+	if (enable) {
+		usbhs_write32(priv, UGCTRL, 0);	/* release PLLRESET */
+		usbhs_rcar3_set_ugctrl2(priv,
+					UGCTRL2_USB0SEL_OTG | UGCTRL2_VBUSSEL);
+
+		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
+		do {
+			val = usbhs_read32(priv, UGSTS);
+			udelay(1);
+		} while (!(val & UGSTS_LOCK) && timeout--);
+		usbhs_write32(priv, UGCTRL, UGCTRL_CONNECT);
+	} else {
+		usbhs_write32(priv, UGCTRL, 0);
+		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, 0);
+		usbhs_write32(priv, UGCTRL, UGCTRL_PLLRESET);
+	}
+
+	return 0;
+}
+
+const struct renesas_usbhs_platform_info usbhs_rcar_gen3_plat_info = {
+	.platform_callback = {
+		.power_ctrl = usbhs_rcar3_power_ctrl,
+		.get_id = usbhs_get_id_as_gadget,
+	},
+	.driver_param = {
+		.has_usb_dmac = 1,
+		.multi_clks = 1,
+		.has_new_pipe_configs = 1,
+	},
+};
+
+const struct renesas_usbhs_platform_info usbhs_rcar_gen3_with_pll_plat_info = {
+	.platform_callback = {
+		.power_ctrl = usbhs_rcar3_power_and_pll_ctrl,
+		.get_id = usbhs_get_id_as_gadget,
+	},
+	.driver_param = {
+		.has_usb_dmac = 1,
+		.multi_clks = 1,
+		.has_new_pipe_configs = 1,
+	},
+};
diff --git a/drivers/usb/renesas_usbhs/rcar3.h b/drivers/usb/renesas_usbhs/rcar3.h
new file mode 100644
index 000000000..d13db30bd
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/rcar3.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include "common.h"
+
+extern const struct renesas_usbhs_platform_info usbhs_rcar_gen3_plat_info;
+extern const struct renesas_usbhs_platform_info
+					usbhs_rcar_gen3_with_pll_plat_info;
diff --git a/drivers/usb/renesas_usbhs/rza.c b/drivers/usb/renesas_usbhs/rza.c
new file mode 100644
index 000000000..2d77edefb
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/rza.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas USB driver RZ/A initialization and power control
+ *
+ * Copyright (C) 2018 Chris Brandt
+ * Copyright (C) 2018-2019 Renesas Electronics Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include "common.h"
+#include "rza.h"
+
+static int usbhs_rza1_hardware_init(struct platform_device *pdev)
+{
+	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
+	struct device_node *usb_x1_clk, *extal_clk;
+	u32 freq_usb = 0, freq_extal = 0;
+
+	/* Input Clock Selection (NOTE: ch0 controls both ch0 and ch1) */
+	usb_x1_clk = of_find_node_by_name(NULL, "usb_x1");
+	extal_clk = of_find_node_by_name(NULL, "extal");
+	of_property_read_u32(usb_x1_clk, "clock-frequency", &freq_usb);
+	of_property_read_u32(extal_clk, "clock-frequency", &freq_extal);
+
+	of_node_put(usb_x1_clk);
+	of_node_put(extal_clk);
+
+	if (freq_usb == 0) {
+		if (freq_extal == 12000000) {
+			/* Select 12MHz XTAL */
+			usbhs_bset(priv, SYSCFG, UCKSEL, UCKSEL);
+		} else {
+			dev_err(usbhs_priv_to_dev(priv), "A 48MHz USB clock or 12MHz main clock is required.\n");
+			return -EIO;
+		}
+	}
+
+	/* Enable USB PLL (NOTE: ch0 controls both ch0 and ch1) */
+	usbhs_bset(priv, SYSCFG, UPLLE, UPLLE);
+	usleep_range(1000, 2000);
+	usbhs_bset(priv, SUSPMODE, SUSPM, SUSPM);
+
+	return 0;
+}
+
+const struct renesas_usbhs_platform_info usbhs_rza1_plat_info = {
+	.platform_callback = {
+		.hardware_init = usbhs_rza1_hardware_init,
+		.get_id = usbhs_get_id_as_gadget,
+	},
+	.driver_param = {
+		.has_new_pipe_configs = 1,
+	},
+};
diff --git a/drivers/usb/renesas_usbhs/rza.h b/drivers/usb/renesas_usbhs/rza.h
new file mode 100644
index 000000000..a29b75fef
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/rza.h
@@ -0,0 +1,5 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include "common.h"
+
+extern const struct renesas_usbhs_platform_info usbhs_rza1_plat_info;
+extern const struct renesas_usbhs_platform_info usbhs_rza2_plat_info;
diff --git a/drivers/usb/renesas_usbhs/rza2.c b/drivers/usb/renesas_usbhs/rza2.c
new file mode 100644
index 000000000..3eed3334a
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/rza2.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas USB driver RZ/A2 initialization and power control
+ *
+ * Copyright (C) 2019 Chris Brandt
+ * Copyright (C) 2019 Renesas Electronics Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include "common.h"
+#include "rza.h"
+
+static int usbhs_rza2_hardware_init(struct platform_device *pdev)
+{
+	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
+	struct phy *phy = phy_get(&pdev->dev, "usb");
+
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
+
+	priv->phy = phy;
+	return 0;
+}
+
+static int usbhs_rza2_hardware_exit(struct platform_device *pdev)
+{
+	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
+
+	phy_put(&pdev->dev, priv->phy);
+	priv->phy = NULL;
+
+	return 0;
+}
+
+static int usbhs_rza2_power_ctrl(struct platform_device *pdev,
+				void __iomem *base, int enable)
+{
+	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
+	int retval = 0;
+
+	if (!priv->phy)
+		return -ENODEV;
+
+	if (enable) {
+		retval = phy_init(priv->phy);
+		usbhs_bset(priv, SUSPMODE, SUSPM, SUSPM);
+		udelay(100);	/* Wait for PLL to become stable */
+		if (!retval)
+			retval = phy_power_on(priv->phy);
+	} else {
+		usbhs_bset(priv, SUSPMODE, SUSPM, 0);
+		phy_power_off(priv->phy);
+		phy_exit(priv->phy);
+	}
+
+	return retval;
+}
+
+const struct renesas_usbhs_platform_info usbhs_rza2_plat_info = {
+	.platform_callback = {
+		.hardware_init = usbhs_rza2_hardware_init,
+		.hardware_exit = usbhs_rza2_hardware_exit,
+		.power_ctrl = usbhs_rza2_power_ctrl,
+		.get_id = usbhs_get_id_as_gadget,
+	},
+	.driver_param = {
+		.has_cnen = 1,
+		.cfifo_byte_addr = 1,
+		.has_new_pipe_configs = 1,
+	},
+};
diff --git a/drivers/usb/roles/Kconfig b/drivers/usb/roles/Kconfig
new file mode 100644
index 000000000..f8b31aa67
--- /dev/null
+++ b/drivers/usb/roles/Kconfig
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config USB_ROLE_SWITCH
+	tristate "USB Role Switch Support"
+	help
+	  USB Role Switch is a device that can select the USB role - host or
+	  device - for a USB port (connector). In most cases dual-role capable
+	  USB controller will also represent the switch, but on some platforms
+	  multiplexer/demultiplexer switch is used to route the data lines on
+	  the USB connector between separate USB host and device controllers.
+
+	  Say Y here if your USB connectors support both device and host roles.
+	  To compile the driver as module, choose M here: the module will be
+	  called roles.ko.
+
+if USB_ROLE_SWITCH
+
+config USB_ROLES_INTEL_XHCI
+	tristate "Intel XHCI USB Role Switch"
+	depends on ACPI && X86
+	help
+	  Driver for the internal USB role switch for switching the USB data
+	  lines between the xHCI host controller and the dwc3 gadget controller
+	  found on various Intel SoCs.
+
+	  To compile the driver as a module, choose M here: the module will
+	  be called intel-xhci-usb-role-switch.
+
+endif # USB_ROLE_SWITCH
diff --git a/drivers/usb/roles/Makefile b/drivers/usb/roles/Makefile
new file mode 100644
index 000000000..757a7d279
--- /dev/null
+++ b/drivers/usb/roles/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_USB_ROLE_SWITCH)		+= roles.o
+roles-y					:= class.o
+obj-$(CONFIG_USB_ROLES_INTEL_XHCI)	+= intel-xhci-usb-role-switch.o
diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c
new file mode 100644
index 000000000..32e6d19f7
--- /dev/null
+++ b/drivers/usb/roles/class.c
@@ -0,0 +1,410 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Role Switch Support
+ *
+ * Copyright (C) 2018 Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ *         Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/usb/role.h>
+#include <linux/property.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+
+static struct class *role_class;
+
+struct usb_role_switch {
+	struct device dev;
+	struct mutex lock; /* device lock*/
+	enum usb_role role;
+
+	/* From descriptor */
+	struct device *usb2_port;
+	struct device *usb3_port;
+	struct device *udc;
+	usb_role_switch_set_t set;
+	usb_role_switch_get_t get;
+	bool allow_userspace_control;
+};
+
+#define to_role_switch(d)	container_of(d, struct usb_role_switch, dev)
+
+/**
+ * usb_role_switch_set_role - Set USB role for a switch
+ * @sw: USB role switch
+ * @role: USB role to be switched to
+ *
+ * Set USB role @role for @sw.
+ */
+int usb_role_switch_set_role(struct usb_role_switch *sw, enum usb_role role)
+{
+	int ret;
+
+	if (IS_ERR_OR_NULL(sw))
+		return 0;
+
+	mutex_lock(&sw->lock);
+
+	ret = sw->set(sw, role);
+	if (!ret) {
+		sw->role = role;
+		kobject_uevent(&sw->dev.kobj, KOBJ_CHANGE);
+	}
+
+	mutex_unlock(&sw->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_role_switch_set_role);
+
+/**
+ * usb_role_switch_get_role - Get the USB role for a switch
+ * @sw: USB role switch
+ *
+ * Depending on the role-switch-driver this function returns either a cached
+ * value of the last set role, or reads back the actual value from the hardware.
+ */
+enum usb_role usb_role_switch_get_role(struct usb_role_switch *sw)
+{
+	enum usb_role role;
+
+	if (IS_ERR_OR_NULL(sw))
+		return USB_ROLE_NONE;
+
+	mutex_lock(&sw->lock);
+
+	if (sw->get)
+		role = sw->get(sw);
+	else
+		role = sw->role;
+
+	mutex_unlock(&sw->lock);
+
+	return role;
+}
+EXPORT_SYMBOL_GPL(usb_role_switch_get_role);
+
+static void *usb_role_switch_match(struct fwnode_handle *fwnode, const char *id,
+				   void *data)
+{
+	struct device *dev;
+
+	if (id && !fwnode_property_present(fwnode, id))
+		return NULL;
+
+	dev = class_find_device_by_fwnode(role_class, fwnode);
+
+	return dev ? to_role_switch(dev) : ERR_PTR(-EPROBE_DEFER);
+}
+
+static struct usb_role_switch *
+usb_role_switch_is_parent(struct fwnode_handle *fwnode)
+{
+	struct fwnode_handle *parent = fwnode_get_parent(fwnode);
+	struct device *dev;
+
+	if (!fwnode_property_present(parent, "usb-role-switch")) {
+		fwnode_handle_put(parent);
+		return NULL;
+	}
+
+	dev = class_find_device_by_fwnode(role_class, parent);
+	fwnode_handle_put(parent);
+	return dev ? to_role_switch(dev) : ERR_PTR(-EPROBE_DEFER);
+}
+
+/**
+ * usb_role_switch_get - Find USB role switch linked with the caller
+ * @dev: The caller device
+ *
+ * Finds and returns role switch linked with @dev. The reference count for the
+ * found switch is incremented.
+ */
+struct usb_role_switch *usb_role_switch_get(struct device *dev)
+{
+	struct usb_role_switch *sw;
+
+	sw = usb_role_switch_is_parent(dev_fwnode(dev));
+	if (!sw)
+		sw = device_connection_find_match(dev, "usb-role-switch", NULL,
+						  usb_role_switch_match);
+
+	if (!IS_ERR_OR_NULL(sw))
+		WARN_ON(!try_module_get(sw->dev.parent->driver->owner));
+
+	return sw;
+}
+EXPORT_SYMBOL_GPL(usb_role_switch_get);
+
+/**
+ * fwnode_usb_role_switch_get - Find USB role switch linked with the caller
+ * @fwnode: The caller device node
+ *
+ * This is similar to the usb_role_switch_get() function above, but it searches
+ * the switch using fwnode instead of device entry.
+ */
+struct usb_role_switch *fwnode_usb_role_switch_get(struct fwnode_handle *fwnode)
+{
+	struct usb_role_switch *sw;
+
+	sw = usb_role_switch_is_parent(fwnode);
+	if (!sw)
+		sw = fwnode_connection_find_match(fwnode, "usb-role-switch",
+						  NULL, usb_role_switch_match);
+	if (!IS_ERR_OR_NULL(sw))
+		WARN_ON(!try_module_get(sw->dev.parent->driver->owner));
+
+	return sw;
+}
+EXPORT_SYMBOL_GPL(fwnode_usb_role_switch_get);
+
+/**
+ * usb_role_switch_put - Release handle to a switch
+ * @sw: USB Role Switch
+ *
+ * Decrement reference count for @sw.
+ */
+void usb_role_switch_put(struct usb_role_switch *sw)
+{
+	if (!IS_ERR_OR_NULL(sw)) {
+		module_put(sw->dev.parent->driver->owner);
+		put_device(&sw->dev);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_role_switch_put);
+
+/**
+ * usb_role_switch_find_by_fwnode - Find USB role switch with its fwnode
+ * @fwnode: fwnode of the USB Role Switch
+ *
+ * Finds and returns role switch with @fwnode. The reference count for the
+ * found switch is incremented.
+ */
+struct usb_role_switch *
+usb_role_switch_find_by_fwnode(const struct fwnode_handle *fwnode)
+{
+	struct device *dev;
+
+	if (!fwnode)
+		return NULL;
+
+	dev = class_find_device_by_fwnode(role_class, fwnode);
+	if (dev)
+		WARN_ON(!try_module_get(dev->parent->driver->owner));
+
+	return dev ? to_role_switch(dev) : NULL;
+}
+EXPORT_SYMBOL_GPL(usb_role_switch_find_by_fwnode);
+
+static umode_t
+usb_role_switch_is_visible(struct kobject *kobj, struct attribute *attr, int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct usb_role_switch *sw = to_role_switch(dev);
+
+	if (sw->allow_userspace_control)
+		return attr->mode;
+
+	return 0;
+}
+
+static const char * const usb_roles[] = {
+	[USB_ROLE_NONE]		= "none",
+	[USB_ROLE_HOST]		= "host",
+	[USB_ROLE_DEVICE]	= "device",
+};
+
+const char *usb_role_string(enum usb_role role)
+{
+	if (role < 0 || role >= ARRAY_SIZE(usb_roles))
+		return "unknown";
+
+	return usb_roles[role];
+}
+EXPORT_SYMBOL_GPL(usb_role_string);
+
+static ssize_t
+role_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct usb_role_switch *sw = to_role_switch(dev);
+	enum usb_role role = usb_role_switch_get_role(sw);
+
+	return sprintf(buf, "%s\n", usb_roles[role]);
+}
+
+static ssize_t role_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t size)
+{
+	struct usb_role_switch *sw = to_role_switch(dev);
+	int ret;
+
+	ret = sysfs_match_string(usb_roles, buf);
+	if (ret < 0) {
+		bool res;
+
+		/* Extra check if the user wants to disable the switch */
+		ret = kstrtobool(buf, &res);
+		if (ret || res)
+			return -EINVAL;
+	}
+
+	ret = usb_role_switch_set_role(sw, ret);
+	if (ret)
+		return ret;
+
+	return size;
+}
+static DEVICE_ATTR_RW(role);
+
+static struct attribute *usb_role_switch_attrs[] = {
+	&dev_attr_role.attr,
+	NULL,
+};
+
+static const struct attribute_group usb_role_switch_group = {
+	.is_visible = usb_role_switch_is_visible,
+	.attrs = usb_role_switch_attrs,
+};
+
+static const struct attribute_group *usb_role_switch_groups[] = {
+	&usb_role_switch_group,
+	NULL,
+};
+
+static int
+usb_role_switch_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	int ret;
+
+	ret = add_uevent_var(env, "USB_ROLE_SWITCH=%s", dev_name(dev));
+	if (ret)
+		dev_err(dev, "failed to add uevent USB_ROLE_SWITCH\n");
+
+	return ret;
+}
+
+static void usb_role_switch_release(struct device *dev)
+{
+	struct usb_role_switch *sw = to_role_switch(dev);
+
+	kfree(sw);
+}
+
+static const struct device_type usb_role_dev_type = {
+	.name = "usb_role_switch",
+	.groups = usb_role_switch_groups,
+	.uevent = usb_role_switch_uevent,
+	.release = usb_role_switch_release,
+};
+
+/**
+ * usb_role_switch_register - Register USB Role Switch
+ * @parent: Parent device for the switch
+ * @desc: Description of the switch
+ *
+ * USB Role Switch is a device capable or choosing the role for USB connector.
+ * On platforms where the USB controller is dual-role capable, the controller
+ * driver will need to register the switch. On platforms where the USB host and
+ * USB device controllers behind the connector are separate, there will be a
+ * mux, and the driver for that mux will need to register the switch.
+ *
+ * Returns handle to a new role switch or ERR_PTR. The content of @desc is
+ * copied.
+ */
+struct usb_role_switch *
+usb_role_switch_register(struct device *parent,
+			 const struct usb_role_switch_desc *desc)
+{
+	struct usb_role_switch *sw;
+	int ret;
+
+	if (!desc || !desc->set)
+		return ERR_PTR(-EINVAL);
+
+	sw = kzalloc(sizeof(*sw), GFP_KERNEL);
+	if (!sw)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&sw->lock);
+
+	sw->allow_userspace_control = desc->allow_userspace_control;
+	sw->usb2_port = desc->usb2_port;
+	sw->usb3_port = desc->usb3_port;
+	sw->udc = desc->udc;
+	sw->set = desc->set;
+	sw->get = desc->get;
+
+	sw->dev.parent = parent;
+	sw->dev.fwnode = desc->fwnode;
+	sw->dev.class = role_class;
+	sw->dev.type = &usb_role_dev_type;
+	dev_set_drvdata(&sw->dev, desc->driver_data);
+	dev_set_name(&sw->dev, "%s-role-switch",
+		     desc->name ? desc->name : dev_name(parent));
+
+	ret = device_register(&sw->dev);
+	if (ret) {
+		put_device(&sw->dev);
+		return ERR_PTR(ret);
+	}
+
+	/* TODO: Symlinks for the host port and the device controller. */
+
+	return sw;
+}
+EXPORT_SYMBOL_GPL(usb_role_switch_register);
+
+/**
+ * usb_role_switch_unregister - Unregsiter USB Role Switch
+ * @sw: USB Role Switch
+ *
+ * Unregister switch that was registered with usb_role_switch_register().
+ */
+void usb_role_switch_unregister(struct usb_role_switch *sw)
+{
+	if (!IS_ERR_OR_NULL(sw))
+		device_unregister(&sw->dev);
+}
+EXPORT_SYMBOL_GPL(usb_role_switch_unregister);
+
+/**
+ * usb_role_switch_set_drvdata - Assign private data pointer to a switch
+ * @sw: USB Role Switch
+ * @data: Private data pointer
+ */
+void usb_role_switch_set_drvdata(struct usb_role_switch *sw, void *data)
+{
+	dev_set_drvdata(&sw->dev, data);
+}
+EXPORT_SYMBOL_GPL(usb_role_switch_set_drvdata);
+
+/**
+ * usb_role_switch_get_drvdata - Get the private data pointer of a switch
+ * @sw: USB Role Switch
+ */
+void *usb_role_switch_get_drvdata(struct usb_role_switch *sw)
+{
+	return dev_get_drvdata(&sw->dev);
+}
+EXPORT_SYMBOL_GPL(usb_role_switch_get_drvdata);
+
+static int __init usb_roles_init(void)
+{
+	role_class = class_create(THIS_MODULE, "usb_role");
+	return PTR_ERR_OR_ZERO(role_class);
+}
+subsys_initcall(usb_roles_init);
+
+static void __exit usb_roles_exit(void)
+{
+	class_destroy(role_class);
+}
+module_exit(usb_roles_exit);
+
+MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("USB Role Class");
diff --git a/drivers/usb/roles/intel-xhci-usb-role-switch.c b/drivers/usb/roles/intel-xhci-usb-role-switch.c
new file mode 100644
index 000000000..5c96e929a
--- /dev/null
+++ b/drivers/usb/roles/intel-xhci-usb-role-switch.c
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Intel XHCI (Cherry Trail, Broxton and others) USB OTG role switch driver
+ *
+ * Copyright (c) 2016-2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Loosely based on android x86 kernel code which is:
+ *
+ * Copyright (C) 2014 Intel Corp.
+ *
+ * Author: Wu, Hao
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/usb/role.h>
+
+/* register definition */
+#define DUAL_ROLE_CFG0			0x68
+#define SW_VBUS_VALID			BIT(24)
+#define SW_IDPIN_EN			BIT(21)
+#define SW_IDPIN			BIT(20)
+#define SW_SWITCH_EN			BIT(16)
+
+#define DRD_CONFIG_DYNAMIC		0
+#define DRD_CONFIG_STATIC_HOST		1
+#define DRD_CONFIG_STATIC_DEVICE	2
+#define DRD_CONFIG_MASK			3
+
+#define DUAL_ROLE_CFG1			0x6c
+#define HOST_MODE			BIT(29)
+
+#define DUAL_ROLE_CFG1_POLL_TIMEOUT	1000
+
+#define DRV_NAME			"intel_xhci_usb_sw"
+
+struct intel_xhci_usb_data {
+	struct device *dev;
+	struct usb_role_switch *role_sw;
+	void __iomem *base;
+	bool enable_sw_switch;
+};
+
+static const struct software_node intel_xhci_usb_node = {
+	"intel-xhci-usb-sw",
+};
+
+static int intel_xhci_usb_set_role(struct usb_role_switch *sw,
+				   enum usb_role role)
+{
+	struct intel_xhci_usb_data *data = usb_role_switch_get_drvdata(sw);
+	unsigned long timeout;
+	acpi_status status;
+	u32 glk, val;
+	u32 drd_config = DRD_CONFIG_DYNAMIC;
+
+	/*
+	 * On many CHT devices ACPI event (_AEI) handlers read / modify /
+	 * write the cfg0 register, just like we do. Take the ACPI lock
+	 * to avoid us racing with the AML code.
+	 */
+	status = acpi_acquire_global_lock(ACPI_WAIT_FOREVER, &glk);
+	if (ACPI_FAILURE(status) && status != AE_NOT_CONFIGURED) {
+		dev_err(data->dev, "Error could not acquire lock\n");
+		return -EIO;
+	}
+
+	pm_runtime_get_sync(data->dev);
+
+	/*
+	 * Set idpin value as requested.
+	 * Since some devices rely on firmware setting DRD_CONFIG and
+	 * SW_SWITCH_EN bits to be zero for role switch,
+	 * do not set these bits for those devices.
+	 */
+	val = readl(data->base + DUAL_ROLE_CFG0);
+	switch (role) {
+	case USB_ROLE_NONE:
+		val |= SW_IDPIN;
+		val &= ~SW_VBUS_VALID;
+		drd_config = DRD_CONFIG_DYNAMIC;
+		break;
+	case USB_ROLE_HOST:
+		val &= ~SW_IDPIN;
+		val &= ~SW_VBUS_VALID;
+		drd_config = DRD_CONFIG_STATIC_HOST;
+		break;
+	case USB_ROLE_DEVICE:
+		val |= SW_IDPIN;
+		val |= SW_VBUS_VALID;
+		drd_config = DRD_CONFIG_STATIC_DEVICE;
+		break;
+	}
+	val |= SW_IDPIN_EN;
+	if (data->enable_sw_switch) {
+		val &= ~DRD_CONFIG_MASK;
+		val |= SW_SWITCH_EN | drd_config;
+	}
+	writel(val, data->base + DUAL_ROLE_CFG0);
+
+	acpi_release_global_lock(glk);
+
+	/* In most case it takes about 600ms to finish mode switching */
+	timeout = jiffies + msecs_to_jiffies(DUAL_ROLE_CFG1_POLL_TIMEOUT);
+
+	/* Polling on CFG1 register to confirm mode switch.*/
+	do {
+		val = readl(data->base + DUAL_ROLE_CFG1);
+		if (!!(val & HOST_MODE) == (role == USB_ROLE_HOST)) {
+			pm_runtime_put(data->dev);
+			return 0;
+		}
+
+		/* Interval for polling is set to about 5 - 10 ms */
+		usleep_range(5000, 10000);
+	} while (time_before(jiffies, timeout));
+
+	pm_runtime_put(data->dev);
+
+	dev_warn(data->dev, "Timeout waiting for role-switch\n");
+	return -ETIMEDOUT;
+}
+
+static enum usb_role intel_xhci_usb_get_role(struct usb_role_switch *sw)
+{
+	struct intel_xhci_usb_data *data = usb_role_switch_get_drvdata(sw);
+	enum usb_role role;
+	u32 val;
+
+	pm_runtime_get_sync(data->dev);
+	val = readl(data->base + DUAL_ROLE_CFG0);
+	pm_runtime_put(data->dev);
+
+	if (!(val & SW_IDPIN))
+		role = USB_ROLE_HOST;
+	else if (val & SW_VBUS_VALID)
+		role = USB_ROLE_DEVICE;
+	else
+		role = USB_ROLE_NONE;
+
+	return role;
+}
+
+static int intel_xhci_usb_probe(struct platform_device *pdev)
+{
+	struct usb_role_switch_desc sw_desc = { };
+	struct device *dev = &pdev->dev;
+	struct intel_xhci_usb_data *data;
+	struct resource *res;
+	int ret;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+	data->base = devm_ioremap(dev, res->start, resource_size(res));
+	if (!data->base)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, data);
+
+	ret = software_node_register(&intel_xhci_usb_node);
+	if (ret)
+		return ret;
+
+	sw_desc.set = intel_xhci_usb_set_role,
+	sw_desc.get = intel_xhci_usb_get_role,
+	sw_desc.allow_userspace_control = true,
+	sw_desc.fwnode = software_node_fwnode(&intel_xhci_usb_node);
+	sw_desc.driver_data = data;
+
+	data->dev = dev;
+	data->enable_sw_switch = !device_property_read_bool(dev,
+						"sw_switch_disable");
+
+	data->role_sw = usb_role_switch_register(dev, &sw_desc);
+	if (IS_ERR(data->role_sw)) {
+		fwnode_handle_put(sw_desc.fwnode);
+		return PTR_ERR(data->role_sw);
+	}
+
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static int intel_xhci_usb_remove(struct platform_device *pdev)
+{
+	struct intel_xhci_usb_data *data = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(&pdev->dev);
+
+	usb_role_switch_unregister(data->role_sw);
+	fwnode_handle_put(software_node_fwnode(&intel_xhci_usb_node));
+
+	return 0;
+}
+
+static const struct platform_device_id intel_xhci_usb_table[] = {
+	{ .name = DRV_NAME },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, intel_xhci_usb_table);
+
+static struct platform_driver intel_xhci_usb_driver = {
+	.driver = {
+		.name = DRV_NAME,
+	},
+	.id_table = intel_xhci_usb_table,
+	.probe = intel_xhci_usb_probe,
+	.remove = intel_xhci_usb_remove,
+};
+
+module_platform_driver(intel_xhci_usb_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Intel XHCI USB role switch driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
new file mode 100644
index 000000000..ef8d1c73c
--- /dev/null
+++ b/drivers/usb/serial/Kconfig
@@ -0,0 +1,656 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Serial device configuration
+#
+
+menuconfig USB_SERIAL
+	tristate "USB Serial Converter support"
+	depends on TTY
+	help
+	  Say Y here if you have a USB device that provides normal serial
+	  ports, or acts like a serial device, and you want to connect it to
+	  your USB bus.
+
+	  Please read <file:Documentation/usb/usb-serial.rst> for more
+	  information on the specifics of the different devices that are
+	  supported, and on how to use them.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbserial.
+
+if USB_SERIAL
+
+config USB_SERIAL_CONSOLE
+	bool "USB Serial Console device support"
+	depends on USB_SERIAL=y
+	help
+	  If you say Y here, it will be possible to use a USB to serial
+	  converter port as the system console (the system console is the
+	  device which receives all kernel messages and warnings and which
+	  allows logins in single user mode). This could be useful if some
+	  terminal or printer is connected to that serial port.
+
+	  Even if you say Y here, the currently visible virtual console
+	  (/dev/tty0) will still be used as the system console by default, but
+	  you can alter that using a kernel command line option such as
+	  "console=ttyUSB0". (Try "man bootparam" or see the documentation of
+	  your boot loader (lilo or loadlin) about how to pass options to the
+	  kernel at boot time.)
+
+	  If you don't have a VGA card installed and you say Y here, the
+	  kernel will automatically use the first USB to serial converter
+	  port, /dev/ttyUSB0, as system console.
+
+	  If unsure, say N.
+
+config USB_SERIAL_GENERIC
+	bool "USB Generic Serial Driver"
+	help
+	  Say Y here if you want to use the generic USB serial driver.  Please
+	  read <file:Documentation/usb/usb-serial.rst> for more information on
+	  using this driver.  It is recommended that the "USB Serial converter
+	  support" be compiled as a module for this driver to be used
+	  properly.
+
+config USB_SERIAL_SIMPLE
+	tristate "USB Serial Simple Driver"
+	help
+	  Say Y here to use the USB serial "simple" driver.  This driver
+	  handles a wide range of very simple devices, all in one
+	  driver.  Specifically, it supports:
+		- Suunto ANT+ USB device.
+		- Medtronic CareLink USB device
+		- Fundamental Software dongle.
+		- Google USB serial devices
+		- HP4x calculators
+		- Libtransistor USB console
+		- a number of Motorola phones
+		- Motorola Tetra devices
+		- Nokia mobile phones
+		- Novatel Wireless GPS receivers
+		- Siemens USB/MPI adapter.
+		- ViVOtech ViVOpay USB device.
+		- Infineon Modem Flashloader USB interface
+		- ZIO Motherboard USB serial interface
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called usb-serial-simple.
+
+config USB_SERIAL_AIRCABLE
+	tristate "USB AIRcable Bluetooth Dongle Driver"
+	help
+	    Say Y here if you want to use USB AIRcable Bluetooth Dongle.
+
+	    To compile this driver as a module, choose M here: the module
+	    will be called aircable.
+
+config USB_SERIAL_ARK3116
+	tristate "USB ARK Micro 3116 USB Serial Driver"
+	help
+	  Say Y here if you want to use a ARK Micro 3116 USB to Serial
+	  device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ark3116
+
+config USB_SERIAL_BELKIN
+	tristate "USB Belkin and Peracom Single Port Serial Driver"
+	help
+	  Say Y here if you want to use a Belkin USB Serial single port
+	  adaptor (F5U103 is one of the model numbers) or the Peracom single
+	  port USB to serial adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called belkin_sa.
+
+config USB_SERIAL_CH341
+	tristate "USB Winchiphead CH341 Single Port Serial Driver"
+	help
+	  Say Y here if you want to use a Winchiphead CH341 single port
+	  USB to serial adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ch341.
+
+config USB_SERIAL_WHITEHEAT
+	tristate "USB ConnectTech WhiteHEAT Serial Driver"
+	select USB_EZUSB_FX2
+	help
+	  Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
+	  USB to serial converter device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called whiteheat.
+
+config USB_SERIAL_DIGI_ACCELEPORT
+	tristate "USB Digi International AccelePort USB Serial Driver"
+	help
+	  Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
+	  2 port (plus parallel port) and 4 port USB serial converters.  The
+	  parallel port on the USB 2 appears as a third serial port on Linux.
+	  The Digi Acceleport USB 8 is not yet supported by this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called digi_acceleport.
+
+config USB_SERIAL_CP210X
+	tristate "USB CP210x family of UART Bridge Controllers"
+	help
+	  Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
+	  to RS232 converters.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cp210x.
+
+config USB_SERIAL_CYPRESS_M8
+	tristate "USB Cypress M8 USB Serial Driver"
+	help
+	  Say Y here if you want to use a device that contains the Cypress
+	  USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
+
+		Attempted SMP support... send bug reports!
+
+	  Supported microcontrollers in the CY4601 family are:
+		CY7C63741 CY7C63742 CY7C63743 CY7C64013
+	
+	  To compile this driver as a module, choose M here: the
+	  module will be called cypress_m8.
+
+config USB_SERIAL_EMPEG
+	tristate "USB Empeg empeg-car Mark I/II Driver"
+	help
+	  Say Y here if you want to connect to your Empeg empeg-car Mark I/II
+	  mp3 player via USB.  The driver uses a single ttyUSB{0,1,2,...}
+	  device node.  See <file:Documentation/usb/usb-serial.rst> for more
+	  tidbits of information.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called empeg.
+
+config USB_SERIAL_FTDI_SIO
+	tristate "USB FTDI Single Port Serial Driver"
+	help
+	  Say Y here if you want to use a FTDI SIO single port USB to serial
+	  converter device. The implementation I have is called the USC-1000.
+	  This driver has also been tested with the 245 and 232 devices.
+
+	  See <http://ftdi-usb-sio.sourceforge.net/> for more
+	  information on this driver and the device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ftdi_sio.
+
+config USB_SERIAL_VISOR
+	tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
+	help
+	  Say Y here if you want to connect to your HandSpring Visor, Palm
+	  m500 or m505 through its USB docking station. See
+	  <http://usbvisor.sourceforge.net/index.php3> for more information on using this
+	  driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called visor.
+
+config USB_SERIAL_IPAQ
+	tristate "USB PocketPC PDA Driver"
+	help
+	  Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
+	  or any other PDA running Windows CE 3.0 or PocketPC 2002
+	  using a USB cradle/cable. For information on using the driver,
+	  read <file:Documentation/usb/usb-serial.rst>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ipaq.
+
+config USB_SERIAL_IR
+	tristate "USB IR Dongle Serial Driver"
+	help
+	  Say Y here if you want to enable simple serial support for USB IrDA
+	  devices.  This is useful if you do not want to use the full IrDA
+	  stack.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ir-usb.
+
+config USB_SERIAL_EDGEPORT
+	tristate "USB Inside Out Edgeport Serial Driver"
+	help
+	  Say Y here if you want to use any of the following devices from
+	  Inside Out Networks (Digi):
+	  Edgeport/4
+	  Rapidport/4
+	  Edgeport/4t
+	  Edgeport/2
+	  Edgeport/4i
+	  Edgeport/2i
+	  Edgeport/421
+	  Edgeport/21
+	  Edgeport/8
+	  Edgeport/8 Dual
+	  Edgeport/2D8
+	  Edgeport/4D8
+	  Edgeport/8i
+	  Edgeport/2 DIN
+	  Edgeport/4 DIN
+	  Edgeport/16 Dual
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called io_edgeport.
+
+config USB_SERIAL_EDGEPORT_TI
+	tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
+	help
+	  Say Y here if you want to use any of the devices from Inside Out
+	  Networks (Digi) that are not supported by the io_edgeport driver.
+	  This includes the Edgeport/1 device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called io_ti.
+
+config USB_SERIAL_F81232
+	tristate "USB Fintek F81232 Single Port Serial Driver"
+	help
+	  Say Y here if you want to use the Fintek F81232 single
+	  port usb to serial adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called f81232.
+
+config USB_SERIAL_F8153X
+	tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
+	help
+	  Say Y here if you want to use the Fintek F81532/534 Multi-Ports
+	  USB to serial adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called f81534.
+
+
+config USB_SERIAL_GARMIN
+	tristate "USB Garmin GPS driver"
+	help
+	  Say Y here if you want to connect to your Garmin GPS.
+	  Should work with most Garmin GPS devices which have a native USB port.
+
+	  See <http://sourceforge.net/projects/garmin-gps> for the latest
+	  version of the driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called garmin_gps.
+
+config USB_SERIAL_IPW
+	tristate "USB IPWireless (3G UMTS TDD) Driver"
+	select USB_SERIAL_WWAN
+	help
+	  Say Y here if you want to use a IPWireless USB modem such as
+	  the ones supplied by Axity3G/Sentech South Africa.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ipw.
+
+config USB_SERIAL_IUU
+	tristate "USB Infinity USB Unlimited Phoenix Driver"
+	help
+	  Say Y here if you want to use a IUU in phoenix mode and get
+	  an extra ttyUSBx device. More information available on
+	  http://eczema.ecze.com/iuu_phoenix.html
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called iuu_phoenix.o
+
+config USB_SERIAL_KEYSPAN_PDA
+	tristate "USB Keyspan PDA / Xircom Single Port Serial Driver"
+	select USB_EZUSB_FX2
+	help
+	  Say Y here if you want to use a Keyspan PDA, Xircom or Entrega single
+	  port USB to serial converter device. This driver makes use of
+	  firmware developed from scratch by Brian Warner.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called keyspan_pda.
+
+config USB_SERIAL_KEYSPAN
+	tristate "USB Keyspan USA-xxx Serial Driver"
+	select USB_EZUSB_FX2
+	help
+	  Say Y here if you want to use Keyspan USB to serial converter
+	  devices.  This driver makes use of Keyspan's official firmware
+	  and was developed with their support.  You must also include
+	  firmware to support your particular device(s).
+
+	  See <http://blemings.org/hugh/keyspan.html> for more information.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called keyspan.
+
+config USB_SERIAL_KLSI
+	tristate "USB KL5KUSB105 (Palmconnect) Driver"
+	help
+	  Say Y here if you want to use a KL5KUSB105 - based single port
+	  serial adapter. The most widely known -- and currently the only
+	  tested -- device in this category is the PalmConnect USB Serial
+	  adapter sold by Palm Inc. for use with their Palm III and Palm V
+	  series PDAs.
+
+	  Please read <file:Documentation/usb/usb-serial.rst> for more
+	  information.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called kl5kusb105.
+
+config USB_SERIAL_KOBIL_SCT
+	tristate "USB KOBIL chipcard reader"
+	help
+	  Say Y here if you want to use one of the following KOBIL USB chipcard
+	  readers:
+
+	    - USB TWIN
+	    - KAAN Standard Plus
+	    - KAAN SIM
+	    - SecOVID Reader Plus
+	    - B1 Professional
+	    - KAAN Professional
+
+	  Note that you need a current CT-API.
+	  To compile this driver as a module, choose M here: the
+	  module will be called kobil_sct.
+
+config USB_SERIAL_MCT_U232
+	tristate "USB MCT Single Port Serial Driver"
+	help
+	  Say Y here if you want to use a USB Serial single port adapter from
+	  Magic Control Technology Corp. (U232 is one of the model numbers).
+
+	  This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
+	  BAY, Belkin F5U109, and Belkin F5U409 devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mct_u232.
+
+config USB_SERIAL_METRO
+	tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
+	help
+	  Say Y here if you want to use a USB POS Metrologic barcode scanner.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called metro-usb.
+
+config USB_SERIAL_MOS7720
+	tristate "USB Moschip 7720 Serial Driver"
+	help
+	  Say Y here if you want to use USB Serial single and double
+	  port adapters from Moschip Semiconductor Tech.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mos7720.
+
+config USB_SERIAL_MOS7715_PARPORT
+	bool "Support for parallel port on the Moschip 7715"
+	depends on USB_SERIAL_MOS7720
+	depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
+	select PARPORT_NOT_PC
+	help
+	Say Y if you have a Moschip 7715 device and would like to use
+	the parallel port it provides.  The port will register with
+	the parport subsystem as a low-level driver.
+
+config USB_SERIAL_MOS7840
+	tristate "USB Moschip 7840/7820 USB Serial Driver"
+	help
+	  Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
+	  Dual-Serial port device from MosChip Semiconductor.
+
+	  The MCS7840 and MCS7820 have been developed to connect a wide range
+	  of standard serial devices to a USB host.  The MCS7840 has a USB
+	  device controller connected to four (4) individual UARTs while the
+	  MCS7820 controller connects to two (2) individual UARTs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mos7840.  If unsure, choose N.
+
+config USB_SERIAL_MXUPORT
+	tristate "USB Moxa UPORT Serial Driver"
+	help
+	  Say Y here if you want to use a MOXA UPort Serial hub.
+
+	  This driver supports:
+
+	  [2 Port]
+	  - UPort 1250 :  2 Port RS-232/422/485 USB to Serial Hub
+	  - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
+			  Isolation
+
+	  [4 Port]
+	  - UPort 1410 :  4 Port RS-232 USB to Serial Hub
+	  - UPort 1450 :  4 Port RS-232/422/485 USB to Serial Hub
+	  - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
+			  Isolation
+
+	  [8 Port]
+	  - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
+	  - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
+
+	  [16 Port]
+	  - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
+	  - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mxuport.
+
+config USB_SERIAL_NAVMAN
+	tristate "USB Navman GPS device"
+	help
+	  To compile this driver as a module, choose M here: the
+	  module will be called navman.
+
+config USB_SERIAL_PL2303
+	tristate "USB Prolific 2303 Single Port Serial Driver"
+	help
+	  Say Y here if you want to use the PL2303 USB Serial single port
+	  adapter from Prolific.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pl2303.
+
+config USB_SERIAL_OTI6858
+	tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
+	help
+	  Say Y here if you want to use the OTi-6858 single port USB to serial
+	  converter device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called oti6858.
+
+config USB_SERIAL_QCAUX
+	tristate "USB Qualcomm Auxiliary Serial Port Driver"
+	help
+	  Say Y here if you want to use the auxiliary serial ports provided
+	  by many modems based on Qualcomm chipsets.  These ports often use
+	  a proprietary protocol called DM and cannot be used for AT- or
+	  PPP-based communication.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called qcaux.  If unsure, choose N.
+
+config USB_SERIAL_QUALCOMM
+	tristate "USB Qualcomm Serial modem"
+	select USB_SERIAL_WWAN
+	help
+	  Say Y here if you have a Qualcomm USB modem device.  These are
+	  usually wireless cellular modems.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called qcserial.
+
+config USB_SERIAL_SPCP8X5
+	tristate "USB SPCP8x5 USB To Serial Driver"
+	help
+	  Say Y here if you want to use the spcp8x5 converter chip.  This is
+	  commonly found in some Z-Wave USB devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called spcp8x5.
+
+config USB_SERIAL_SAFE
+	tristate "USB Safe Serial (Encapsulated) Driver"
+
+config USB_SERIAL_SAFE_PADDED
+	bool "USB Secure Encapsulated Driver - Padded"
+	depends on USB_SERIAL_SAFE
+
+config USB_SERIAL_SIERRAWIRELESS
+	tristate "USB Sierra Wireless Driver"
+	help
+	  Say M here if you want to use Sierra Wireless devices.
+
+	  Many devices have a feature known as TRU-Install. For those devices
+	  to work properly, the USB Storage Sierra feature must be enabled.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sierra.
+
+config USB_SERIAL_SYMBOL
+	tristate "USB Symbol Barcode driver (serial mode)"
+	help
+	  Say Y here if you want to use a Symbol USB Barcode device
+	  in serial emulation mode.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called symbolserial.
+
+config USB_SERIAL_TI
+	tristate "USB TI 3410/5052 Serial Driver"
+	help
+	  Say Y here if you want to use the TI USB 3410 or 5052
+	  serial devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ti_usb_3410_5052.
+
+config USB_SERIAL_CYBERJACK
+	tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
+	help
+	  Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
+	  reader. This is an interface to ISO 7816 compatible contact-based
+	  chipcards, e.g. GSM SIMs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyberjack.
+
+	  If unsure, say N.
+
+config USB_SERIAL_WWAN
+	tristate
+
+config USB_SERIAL_OPTION
+	tristate "USB driver for GSM and CDMA modems"
+	select USB_SERIAL_WWAN
+	help
+	  Say Y here if you have a GSM or CDMA modem that's connected to USB.
+
+	  This driver also supports several PCMCIA cards which have a
+	  built-in OHCI-USB adapter and an internally-connected GSM modem.
+	  The USB bus on these cards is not accessible externally.
+
+	  Supported devices include (some of?) those made by:
+	  Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called option.
+
+	  If this driver doesn't recognize your device,
+	  it might be accessible via the FTDI_SIO driver.
+
+config USB_SERIAL_OMNINET
+	tristate "USB ZyXEL omni.net LCD Plus Driver"
+	help
+	  Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called omninet.
+
+config USB_SERIAL_OPTICON
+	tristate "USB Opticon Barcode driver (serial mode)"
+	help
+	  Say Y here if you want to use a Opticon USB Barcode device
+	  in serial emulation mode.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called opticon.
+
+config USB_SERIAL_XSENS_MT
+	tristate "Xsens motion tracker serial interface driver"
+	help
+	  Say Y here if you want to use Xsens motion trackers.
+
+	  This driver supports the new generation of motion trackers
+	  by Xsens. Older devices can be accessed using the FTDI_SIO
+	  driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xsens_mt.
+
+config USB_SERIAL_WISHBONE
+	tristate "USB-Wishbone adapter interface driver"
+	help
+	  Say Y here if you want to use a USB attached Wishbone bus.
+
+	  Wishbone is an open hardware SoC bus commonly used in FPGA
+	  designs. Bus access can be serialized using the Etherbone
+	  protocol <http://www.ohwr.org/projects/etherbone-core>.
+
+	  This driver is intended to be used with devices which attach
+	  their internal Wishbone bus to a USB serial interface using
+	  the Etherbone protocol. A userspace library is required to
+	  speak the protocol made available by this driver as ttyUSBx.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wishbone-serial.
+
+config USB_SERIAL_SSU100
+	tristate "USB Quatech SSU-100 Single Port Serial Driver"
+	help
+	  Say Y here if you want to use the Quatech SSU-100 single
+	  port usb to serial adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ssu100.
+
+config USB_SERIAL_QT2
+	tristate "USB Quatech Serial Driver for USB 2 devices"
+	help
+	  Say Y here if you want to use the Quatech USB 2
+	  serial adapters.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called quatech-serial.
+
+config USB_SERIAL_UPD78F0730
+	tristate "USB Renesas uPD78F0730 Single Port Serial Driver"
+	help
+	  Say Y here if you want to use the Renesas uPD78F0730
+	  serial driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called upd78f0730.
+
+config USB_SERIAL_XR
+	tristate "USB MaxLinear/Exar USB to Serial driver"
+	help
+	  Say Y here if you want to use MaxLinear/Exar USB to Serial converter
+	  devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xr_serial.
+
+config USB_SERIAL_DEBUG
+	tristate "USB Debugging Device"
+	help
+	  Say Y here if you have a USB debugging device used to receive
+	  debugging data from another machine.  The most common of these
+	  devices is the NetChip TurboCONNECT device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usb-debug.
+
+endif # USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
new file mode 100644
index 000000000..c7bb1a881
--- /dev/null
+++ b/drivers/usb/serial/Makefile
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the USB serial device drivers.
+#
+
+# Object file lists.
+
+obj-$(CONFIG_USB_SERIAL)			+= usbserial.o
+
+usbserial-y := usb-serial.o generic.o bus.o
+
+usbserial-$(CONFIG_USB_SERIAL_CONSOLE)	+= console.o
+
+obj-$(CONFIG_USB_SERIAL_AIRCABLE)		+= aircable.o
+obj-$(CONFIG_USB_SERIAL_ARK3116)		+= ark3116.o
+obj-$(CONFIG_USB_SERIAL_BELKIN)			+= belkin_sa.o
+obj-$(CONFIG_USB_SERIAL_CH341)			+= ch341.o
+obj-$(CONFIG_USB_SERIAL_CP210X)			+= cp210x.o
+obj-$(CONFIG_USB_SERIAL_CYBERJACK)		+= cyberjack.o
+obj-$(CONFIG_USB_SERIAL_CYPRESS_M8)		+= cypress_m8.o
+obj-$(CONFIG_USB_SERIAL_DEBUG)			+= usb_debug.o
+obj-$(CONFIG_USB_SERIAL_DIGI_ACCELEPORT)	+= digi_acceleport.o
+obj-$(CONFIG_USB_SERIAL_EDGEPORT)		+= io_edgeport.o
+obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI)		+= io_ti.o
+obj-$(CONFIG_USB_SERIAL_EMPEG)			+= empeg.o
+obj-$(CONFIG_USB_SERIAL_F81232)			+= f81232.o
+obj-$(CONFIG_USB_SERIAL_F8153X)			+= f81534.o
+obj-$(CONFIG_USB_SERIAL_FTDI_SIO)		+= ftdi_sio.o
+obj-$(CONFIG_USB_SERIAL_GARMIN)			+= garmin_gps.o
+obj-$(CONFIG_USB_SERIAL_IPAQ)			+= ipaq.o
+obj-$(CONFIG_USB_SERIAL_IPW)			+= ipw.o
+obj-$(CONFIG_USB_SERIAL_IR)			+= ir-usb.o
+obj-$(CONFIG_USB_SERIAL_IUU)			+= iuu_phoenix.o
+obj-$(CONFIG_USB_SERIAL_KEYSPAN)		+= keyspan.o
+obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA)		+= keyspan_pda.o
+obj-$(CONFIG_USB_SERIAL_KLSI)			+= kl5kusb105.o
+obj-$(CONFIG_USB_SERIAL_KOBIL_SCT)		+= kobil_sct.o
+obj-$(CONFIG_USB_SERIAL_MCT_U232)		+= mct_u232.o
+obj-$(CONFIG_USB_SERIAL_METRO)			+= metro-usb.o
+obj-$(CONFIG_USB_SERIAL_MOS7720)		+= mos7720.o
+obj-$(CONFIG_USB_SERIAL_MOS7840)		+= mos7840.o
+obj-$(CONFIG_USB_SERIAL_MXUPORT)		+= mxuport.o
+obj-$(CONFIG_USB_SERIAL_NAVMAN)			+= navman.o
+obj-$(CONFIG_USB_SERIAL_OMNINET)		+= omninet.o
+obj-$(CONFIG_USB_SERIAL_OPTICON)		+= opticon.o
+obj-$(CONFIG_USB_SERIAL_OPTION)			+= option.o
+obj-$(CONFIG_USB_SERIAL_OTI6858)		+= oti6858.o
+obj-$(CONFIG_USB_SERIAL_PL2303)			+= pl2303.o
+obj-$(CONFIG_USB_SERIAL_QCAUX)			+= qcaux.o
+obj-$(CONFIG_USB_SERIAL_QUALCOMM)		+= qcserial.o
+obj-$(CONFIG_USB_SERIAL_QT2)			+= quatech2.o
+obj-$(CONFIG_USB_SERIAL_SAFE)			+= safe_serial.o
+obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)		+= sierra.o
+obj-$(CONFIG_USB_SERIAL_SIMPLE)			+= usb-serial-simple.o
+obj-$(CONFIG_USB_SERIAL_SPCP8X5)		+= spcp8x5.o
+obj-$(CONFIG_USB_SERIAL_SSU100)			+= ssu100.o
+obj-$(CONFIG_USB_SERIAL_SYMBOL)			+= symbolserial.o
+obj-$(CONFIG_USB_SERIAL_WWAN)			+= usb_wwan.o
+obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
+obj-$(CONFIG_USB_SERIAL_UPD78F0730)		+= upd78f0730.o
+obj-$(CONFIG_USB_SERIAL_VISOR)			+= visor.o
+obj-$(CONFIG_USB_SERIAL_WISHBONE)		+= wishbone-serial.o
+obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o
+obj-$(CONFIG_USB_SERIAL_XR)			+= xr_serial.o
+obj-$(CONFIG_USB_SERIAL_XSENS_MT)		+= xsens_mt.o
diff --git a/drivers/usb/serial/Makefile-keyspan_pda_fw b/drivers/usb/serial/Makefile-keyspan_pda_fw
new file mode 100644
index 000000000..503b472d8
--- /dev/null
+++ b/drivers/usb/serial/Makefile-keyspan_pda_fw
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# some rules to handle the quirks of the 'as31' assembler, like
+# insisting upon fixed suffixes for the input and output files,
+# and its lack of preprocessor support
+
+all: keyspan_pda_fw.h
+
+%.asm: %.S
+	gcc -x assembler-with-cpp -P -E -o $@ $<
+
+%.hex: %.asm
+	as31 -l $<
+	mv $*.obj $@
+
+%_fw.h: %.hex ezusb_convert.pl
+	perl ezusb_convert.pl $* < $< > $@
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
new file mode 100644
index 000000000..a1df686c3
--- /dev/null
+++ b/drivers/usb/serial/aircable.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AIRcable USB Bluetooth Dongle Driver.
+ *
+ * Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
+ * Copyright (C) 2006 Manuel Francisco Naranjo (naranjo.manuel@gmail.com)
+ *
+ * The device works as an standard CDC device, it has 2 interfaces, the first
+ * one is for firmware access and the second is the serial one.
+ * The protocol is very simply, there are two possibilities reading or writing.
+ * When writing the first urb must have a Header that starts with 0x20 0x29 the
+ * next two bytes must say how much data will be sent.
+ * When reading the process is almost equal except that the header starts with
+ * 0x00 0x20.
+ *
+ * The device simply need some stuff to understand data coming from the usb
+ * buffer: The First and Second byte is used for a Header, the Third and Fourth
+ * tells the  device the amount of information the package holds.
+ * Packages are 60 bytes long Header Stuff.
+ * When writing to the device the first two bytes of the header are 0x20 0x29
+ * When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange
+ * situation, when too much data arrives to the device because it sends the data
+ * but with out the header. I will use a simply hack to override this situation,
+ * if there is data coming that does not contain any header, then that is data
+ * that must go directly to the tty, as there is no documentation about if there
+ * is any other control code, I will simply check for the first
+ * one.
+ *
+ * I have taken some info from a Greg Kroah-Hartman article:
+ * http://www.linuxjournal.com/article/6573
+ * And from Linux Device Driver Kit CD, which is a great work, the authors taken
+ * the work to recompile lots of information an knowledge in drivers development
+ * and made it all available inside a cd.
+ * URL: http://kernel.org/pub/linux/kernel/people/gregkh/ddk/
+ *
+ */
+
+#include <asm/unaligned.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/tty_flip.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+/* Vendor and Product ID */
+#define AIRCABLE_VID		0x16CA
+#define AIRCABLE_USB_PID	0x1502
+
+/* Protocol Stuff */
+#define HCI_HEADER_LENGTH	0x4
+#define TX_HEADER_0		0x20
+#define TX_HEADER_1		0x29
+#define RX_HEADER_0		0x00
+#define RX_HEADER_1		0x20
+#define HCI_COMPLETE_FRAME	64
+
+/* rx_flags */
+#define THROTTLED		0x01
+#define ACTUALLY_THROTTLED	0x02
+
+#define DRIVER_AUTHOR "Naranjo, Manuel Francisco <naranjo.manuel@gmail.com>, Johan Hovold <jhovold@gmail.com>"
+#define DRIVER_DESC "AIRcable USB Driver"
+
+/* ID table that will be registered with USB core */
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(AIRCABLE_VID, AIRCABLE_USB_PID) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static int aircable_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
+{
+	int count;
+	unsigned char *buf = dest;
+
+	count = kfifo_out_locked(&port->write_fifo, buf + HCI_HEADER_LENGTH,
+					size - HCI_HEADER_LENGTH, &port->lock);
+	buf[0] = TX_HEADER_0;
+	buf[1] = TX_HEADER_1;
+	put_unaligned_le16(count, &buf[2]);
+
+	return count + HCI_HEADER_LENGTH;
+}
+
+static int aircable_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds)
+{
+	/* Ignore the first interface, which has no bulk endpoints. */
+	if (epds->num_bulk_out == 0) {
+		dev_dbg(&serial->interface->dev,
+			"ignoring interface with no bulk-out endpoints\n");
+		return -ENODEV;
+	}
+
+	return 1;
+}
+
+static int aircable_process_packet(struct usb_serial_port *port,
+		int has_headers, char *packet, int len)
+{
+	if (has_headers) {
+		len -= HCI_HEADER_LENGTH;
+		packet += HCI_HEADER_LENGTH;
+	}
+	if (len <= 0) {
+		dev_dbg(&port->dev, "%s - malformed packet\n", __func__);
+		return 0;
+	}
+
+	tty_insert_flip_string(&port->port, packet, len);
+
+	return len;
+}
+
+static void aircable_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	char *data = urb->transfer_buffer;
+	int has_headers;
+	int count;
+	int len;
+	int i;
+
+	has_headers = (urb->actual_length > 2 && data[0] == RX_HEADER_0);
+
+	count = 0;
+	for (i = 0; i < urb->actual_length; i += HCI_COMPLETE_FRAME) {
+		len = min_t(int, urb->actual_length - i, HCI_COMPLETE_FRAME);
+		count += aircable_process_packet(port, has_headers,
+								&data[i], len);
+	}
+
+	if (count)
+		tty_flip_buffer_push(&port->port);
+}
+
+static struct usb_serial_driver aircable_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"aircable",
+	},
+	.id_table = 		id_table,
+	.bulk_out_size =	HCI_COMPLETE_FRAME,
+	.calc_num_ports =	aircable_calc_num_ports,
+	.process_read_urb =	aircable_process_read_urb,
+	.prepare_write_buffer =	aircable_prepare_write_buffer,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&aircable_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
new file mode 100644
index 000000000..9452291f1
--- /dev/null
+++ b/drivers/usb/serial/ark3116.c
@@ -0,0 +1,732 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2009 by Bart Hartgers (bart.hartgers+ark3116@gmail.com)
+ * Original version:
+ * Copyright (C) 2006
+ *   Simon Schulz (ark3116_driver <at> auctionant.de)
+ *
+ * ark3116
+ * - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
+ *   productid=0x0232) (used in a datacable called KQ-U8A)
+ *
+ * Supports full modem status lines, break, hardware flow control. Does not
+ * support software flow control, since I do not know how to enable it in hw.
+ *
+ * This driver is a essentially new implementation. I initially dug
+ * into the old ark3116.c driver and suddenly realized the ark3116 is
+ * a 16450 with a USB interface glued to it. See comments at the
+ * bottom of this file.
+ */
+
+#include <linux/kernel.h>
+#include <linux/ioctl.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/uaccess.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+
+#define DRIVER_AUTHOR "Bart Hartgers <bart.hartgers+ark3116@gmail.com>"
+#define DRIVER_DESC "USB ARK3116 serial/IrDA driver"
+#define DRIVER_DEV_DESC "ARK3116 RS232/IrDA"
+#define DRIVER_NAME "ark3116"
+
+/* usb timeout of 1 second */
+#define ARK_TIMEOUT 1000
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x6547, 0x0232) },
+	{ USB_DEVICE(0x18ec, 0x3118) },		/* USB to IrDA adapter */
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static int is_irda(struct usb_serial *serial)
+{
+	struct usb_device *dev = serial->dev;
+	if (le16_to_cpu(dev->descriptor.idVendor) == 0x18ec &&
+			le16_to_cpu(dev->descriptor.idProduct) == 0x3118)
+		return 1;
+	return 0;
+}
+
+struct ark3116_private {
+	int			irda;	/* 1 for irda device */
+
+	/* protects hw register updates */
+	struct mutex		hw_lock;
+
+	int			quot;	/* baudrate divisor */
+	__u32			lcr;	/* line control register value */
+	__u32			hcr;	/* handshake control register (0x8)
+					 * value */
+	__u32			mcr;	/* modem control register value */
+
+	/* protects the status values below */
+	spinlock_t		status_lock;
+	__u32			msr;	/* modem status register value */
+	__u32			lsr;	/* line status register value */
+};
+
+static int ark3116_write_reg(struct usb_serial *serial,
+			     unsigned reg, __u8 val)
+{
+	int result;
+	 /* 0xfe 0x40 are magic values taken from original driver */
+	result = usb_control_msg(serial->dev,
+				 usb_sndctrlpipe(serial->dev, 0),
+				 0xfe, 0x40, val, reg,
+				 NULL, 0, ARK_TIMEOUT);
+	if (result)
+		return result;
+
+	return 0;
+}
+
+static int ark3116_read_reg(struct usb_serial *serial,
+			    unsigned reg, unsigned char *buf)
+{
+	int result;
+	/* 0xfe 0xc0 are magic values taken from original driver */
+	result = usb_control_msg(serial->dev,
+				 usb_rcvctrlpipe(serial->dev, 0),
+				 0xfe, 0xc0, 0, reg,
+				 buf, 1, ARK_TIMEOUT);
+	if (result < 1) {
+		dev_err(&serial->interface->dev,
+				"failed to read register %u: %d\n",
+				reg, result);
+		if (result >= 0)
+			result = -EIO;
+
+		return result;
+	}
+
+	return 0;
+}
+
+static inline int calc_divisor(int bps)
+{
+	/* Original ark3116 made some exceptions in rounding here
+	 * because windows did the same. Assume that is not really
+	 * necessary.
+	 * Crystal is 12MHz, probably because of USB, but we divide by 4?
+	 */
+	return (12000000 + 2*bps) / (4*bps);
+}
+
+static int ark3116_port_probe(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct ark3116_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_init(&priv->hw_lock);
+	spin_lock_init(&priv->status_lock);
+
+	priv->irda = is_irda(serial);
+
+	usb_set_serial_port_data(port, priv);
+
+	/* setup the hardware */
+	ark3116_write_reg(serial, UART_IER, 0);
+	/* disable DMA */
+	ark3116_write_reg(serial, UART_FCR, 0);
+	/* handshake control */
+	priv->hcr = 0;
+	ark3116_write_reg(serial, 0x8     , 0);
+	/* modem control */
+	priv->mcr = 0;
+	ark3116_write_reg(serial, UART_MCR, 0);
+
+	if (!(priv->irda)) {
+		ark3116_write_reg(serial, 0xb , 0);
+	} else {
+		ark3116_write_reg(serial, 0xb , 1);
+		ark3116_write_reg(serial, 0xc , 0);
+		ark3116_write_reg(serial, 0xd , 0x41);
+		ark3116_write_reg(serial, 0xa , 1);
+	}
+
+	/* setup baudrate */
+	ark3116_write_reg(serial, UART_LCR, UART_LCR_DLAB);
+
+	/* setup for 9600 8N1 */
+	priv->quot = calc_divisor(9600);
+	ark3116_write_reg(serial, UART_DLL, priv->quot & 0xff);
+	ark3116_write_reg(serial, UART_DLM, (priv->quot>>8) & 0xff);
+
+	priv->lcr = UART_LCR_WLEN8;
+	ark3116_write_reg(serial, UART_LCR, UART_LCR_WLEN8);
+
+	ark3116_write_reg(serial, 0xe, 0);
+
+	if (priv->irda)
+		ark3116_write_reg(serial, 0x9, 0);
+
+	dev_info(&port->dev, "using %s mode\n", priv->irda ? "IrDA" : "RS232");
+
+	return 0;
+}
+
+static void ark3116_port_remove(struct usb_serial_port *port)
+{
+	struct ark3116_private *priv = usb_get_serial_port_data(port);
+
+	/* device is closed, so URBs and DMA should be down */
+	mutex_destroy(&priv->hw_lock);
+	kfree(priv);
+}
+
+static void ark3116_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
+				const struct ktermios *old_termios)
+{
+	struct usb_serial *serial = port->serial;
+	struct ark3116_private *priv = usb_get_serial_port_data(port);
+	struct ktermios *termios = &tty->termios;
+	unsigned int cflag = termios->c_cflag;
+	int bps = tty_get_baud_rate(tty);
+	int quot;
+	__u8 lcr, hcr, eval;
+
+	/* set data bit count */
+	lcr = UART_LCR_WLEN(tty_get_char_size(cflag));
+
+	if (cflag & CSTOPB)
+		lcr |= UART_LCR_STOP;
+	if (cflag & PARENB)
+		lcr |= UART_LCR_PARITY;
+	if (!(cflag & PARODD))
+		lcr |= UART_LCR_EPAR;
+	if (cflag & CMSPAR)
+		lcr |= UART_LCR_SPAR;
+
+	/* handshake control */
+	hcr = (cflag & CRTSCTS) ? 0x03 : 0x00;
+
+	/* calc baudrate */
+	dev_dbg(&port->dev, "%s - setting bps to %d\n", __func__, bps);
+	eval = 0;
+	switch (bps) {
+	case 0:
+		quot = calc_divisor(9600);
+		break;
+	default:
+		if ((bps < 75) || (bps > 3000000))
+			bps = 9600;
+		quot = calc_divisor(bps);
+		break;
+	case 460800:
+		eval = 1;
+		quot = calc_divisor(bps);
+		break;
+	case 921600:
+		eval = 2;
+		quot = calc_divisor(bps);
+		break;
+	}
+
+	/* Update state: synchronize */
+	mutex_lock(&priv->hw_lock);
+
+	/* keep old LCR_SBC bit */
+	lcr |= (priv->lcr & UART_LCR_SBC);
+
+	dev_dbg(&port->dev, "%s - setting hcr:0x%02x,lcr:0x%02x,quot:%d\n",
+		__func__, hcr, lcr, quot);
+
+	/* handshake control */
+	if (priv->hcr != hcr) {
+		priv->hcr = hcr;
+		ark3116_write_reg(serial, 0x8, hcr);
+	}
+
+	/* baudrate */
+	if (priv->quot != quot) {
+		priv->quot = quot;
+		priv->lcr = lcr; /* need to write lcr anyway */
+
+		/* disable DMA since transmit/receive is
+		 * shadowed by UART_DLL
+		 */
+		ark3116_write_reg(serial, UART_FCR, 0);
+
+		ark3116_write_reg(serial, UART_LCR,
+				  lcr|UART_LCR_DLAB);
+		ark3116_write_reg(serial, UART_DLL, quot & 0xff);
+		ark3116_write_reg(serial, UART_DLM, (quot>>8) & 0xff);
+
+		/* restore lcr */
+		ark3116_write_reg(serial, UART_LCR, lcr);
+		/* magic baudrate thingy: not sure what it does,
+		 * but windows does this as well.
+		 */
+		ark3116_write_reg(serial, 0xe, eval);
+
+		/* enable DMA */
+		ark3116_write_reg(serial, UART_FCR, UART_FCR_DMA_SELECT);
+	} else if (priv->lcr != lcr) {
+		priv->lcr = lcr;
+		ark3116_write_reg(serial, UART_LCR, lcr);
+	}
+
+	mutex_unlock(&priv->hw_lock);
+
+	/* check for software flow control */
+	if (I_IXOFF(tty) || I_IXON(tty)) {
+		dev_warn(&port->dev,
+				"software flow control not implemented\n");
+	}
+
+	/* Don't rewrite B0 */
+	if (tty_termios_baud_rate(termios))
+		tty_termios_encode_baud_rate(termios, bps, bps);
+}
+
+static void ark3116_close(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+
+	/* disable DMA */
+	ark3116_write_reg(serial, UART_FCR, 0);
+
+	/* deactivate interrupts */
+	ark3116_write_reg(serial, UART_IER, 0);
+
+	usb_serial_generic_close(port);
+
+	usb_kill_urb(port->interrupt_in_urb);
+}
+
+static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct ark3116_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	unsigned char *buf;
+	int result;
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	result = usb_serial_generic_open(tty, port);
+	if (result) {
+		dev_dbg(&port->dev,
+			"%s - usb_serial_generic_open failed: %d\n",
+			__func__, result);
+		goto err_free;
+	}
+
+	/* remove any data still left: also clears error state */
+	ark3116_read_reg(serial, UART_RX, buf);
+
+	/* read modem status */
+	result = ark3116_read_reg(serial, UART_MSR, buf);
+	if (result)
+		goto err_close;
+	priv->msr = *buf;
+
+	/* read line status */
+	result = ark3116_read_reg(serial, UART_LSR, buf);
+	if (result)
+		goto err_close;
+	priv->lsr = *buf;
+
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (result) {
+		dev_err(&port->dev, "submit irq_in urb failed %d\n",
+			result);
+		goto err_close;
+	}
+
+	/* activate interrupts */
+	ark3116_write_reg(port->serial, UART_IER, UART_IER_MSI|UART_IER_RLSI);
+
+	/* enable DMA */
+	ark3116_write_reg(port->serial, UART_FCR, UART_FCR_DMA_SELECT);
+
+	/* setup termios */
+	if (tty)
+		ark3116_set_termios(tty, port, NULL);
+
+	kfree(buf);
+
+	return 0;
+
+err_close:
+	usb_serial_generic_close(port);
+err_free:
+	kfree(buf);
+
+	return result;
+}
+
+static int ark3116_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ark3116_private *priv = usb_get_serial_port_data(port);
+	__u32 status;
+	__u32 ctrl;
+	unsigned long flags;
+
+	mutex_lock(&priv->hw_lock);
+	ctrl = priv->mcr;
+	mutex_unlock(&priv->hw_lock);
+
+	spin_lock_irqsave(&priv->status_lock, flags);
+	status = priv->msr;
+	spin_unlock_irqrestore(&priv->status_lock, flags);
+
+	return  (status & UART_MSR_DSR  ? TIOCM_DSR  : 0) |
+		(status & UART_MSR_CTS  ? TIOCM_CTS  : 0) |
+		(status & UART_MSR_RI   ? TIOCM_RI   : 0) |
+		(status & UART_MSR_DCD  ? TIOCM_CD   : 0) |
+		(ctrl   & UART_MCR_DTR  ? TIOCM_DTR  : 0) |
+		(ctrl   & UART_MCR_RTS  ? TIOCM_RTS  : 0) |
+		(ctrl   & UART_MCR_OUT1 ? TIOCM_OUT1 : 0) |
+		(ctrl   & UART_MCR_OUT2 ? TIOCM_OUT2 : 0);
+}
+
+static int ark3116_tiocmset(struct tty_struct *tty,
+			unsigned set, unsigned clr)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ark3116_private *priv = usb_get_serial_port_data(port);
+
+	/* we need to take the mutex here, to make sure that the value
+	 * in priv->mcr is actually the one that is in the hardware
+	 */
+
+	mutex_lock(&priv->hw_lock);
+
+	if (set & TIOCM_RTS)
+		priv->mcr |= UART_MCR_RTS;
+	if (set & TIOCM_DTR)
+		priv->mcr |= UART_MCR_DTR;
+	if (set & TIOCM_OUT1)
+		priv->mcr |= UART_MCR_OUT1;
+	if (set & TIOCM_OUT2)
+		priv->mcr |= UART_MCR_OUT2;
+	if (clr & TIOCM_RTS)
+		priv->mcr &= ~UART_MCR_RTS;
+	if (clr & TIOCM_DTR)
+		priv->mcr &= ~UART_MCR_DTR;
+	if (clr & TIOCM_OUT1)
+		priv->mcr &= ~UART_MCR_OUT1;
+	if (clr & TIOCM_OUT2)
+		priv->mcr &= ~UART_MCR_OUT2;
+
+	ark3116_write_reg(port->serial, UART_MCR, priv->mcr);
+
+	mutex_unlock(&priv->hw_lock);
+
+	return 0;
+}
+
+static void ark3116_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ark3116_private *priv = usb_get_serial_port_data(port);
+
+	/* LCR is also used for other things: protect access */
+	mutex_lock(&priv->hw_lock);
+
+	if (break_state)
+		priv->lcr |= UART_LCR_SBC;
+	else
+		priv->lcr &= ~UART_LCR_SBC;
+
+	ark3116_write_reg(port->serial, UART_LCR, priv->lcr);
+
+	mutex_unlock(&priv->hw_lock);
+}
+
+static void ark3116_update_msr(struct usb_serial_port *port, __u8 msr)
+{
+	struct ark3116_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->status_lock, flags);
+	priv->msr = msr;
+	spin_unlock_irqrestore(&priv->status_lock, flags);
+
+	if (msr & UART_MSR_ANY_DELTA) {
+		/* update input line counters */
+		if (msr & UART_MSR_DCTS)
+			port->icount.cts++;
+		if (msr & UART_MSR_DDSR)
+			port->icount.dsr++;
+		if (msr & UART_MSR_DDCD)
+			port->icount.dcd++;
+		if (msr & UART_MSR_TERI)
+			port->icount.rng++;
+		wake_up_interruptible(&port->port.delta_msr_wait);
+	}
+}
+
+static void ark3116_update_lsr(struct usb_serial_port *port, __u8 lsr)
+{
+	struct ark3116_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->status_lock, flags);
+	/* combine bits */
+	priv->lsr |= lsr;
+	spin_unlock_irqrestore(&priv->status_lock, flags);
+
+	if (lsr&UART_LSR_BRK_ERROR_BITS) {
+		if (lsr & UART_LSR_BI)
+			port->icount.brk++;
+		if (lsr & UART_LSR_FE)
+			port->icount.frame++;
+		if (lsr & UART_LSR_PE)
+			port->icount.parity++;
+		if (lsr & UART_LSR_OE)
+			port->icount.overrun++;
+	}
+}
+
+static void ark3116_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	int status = urb->status;
+	const __u8 *data = urb->transfer_buffer;
+	int result;
+
+	switch (status) {
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
+		return;
+	default:
+		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
+		break;
+	case 0: /* success */
+		/* discovered this by trail and error... */
+		if ((urb->actual_length == 4) && (data[0] == 0xe8)) {
+			const __u8 id = data[1]&UART_IIR_ID;
+			dev_dbg(&port->dev, "%s: iir=%02x\n", __func__, data[1]);
+			if (id == UART_IIR_MSI) {
+				dev_dbg(&port->dev, "%s: msr=%02x\n",
+					__func__, data[3]);
+				ark3116_update_msr(port, data[3]);
+				break;
+			} else if (id == UART_IIR_RLSI) {
+				dev_dbg(&port->dev, "%s: lsr=%02x\n",
+					__func__, data[2]);
+				ark3116_update_lsr(port, data[2]);
+				break;
+			}
+		}
+		/*
+		 * Not sure what this data meant...
+		 */
+		usb_serial_debug_data(&port->dev, __func__,
+				      urb->actual_length,
+				      urb->transfer_buffer);
+		break;
+	}
+
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result)
+		dev_err(&port->dev, "failed to resubmit interrupt urb: %d\n",
+			result);
+}
+
+
+/* Data comes in via the bulk (data) URB, errors/interrupts via the int URB.
+ * This means that we cannot be sure which data byte has an associated error
+ * condition, so we report an error for all data in the next bulk read.
+ *
+ * Actually, there might even be a window between the bulk data leaving the
+ * ark and reading/resetting the lsr in the read_bulk_callback where an
+ * interrupt for the next data block could come in.
+ * Without somekind of ordering on the ark, we would have to report the
+ * error for the next block of data as well...
+ * For now, let's pretend this can't happen.
+ */
+static void ark3116_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct ark3116_private *priv = usb_get_serial_port_data(port);
+	unsigned char *data = urb->transfer_buffer;
+	char tty_flag = TTY_NORMAL;
+	unsigned long flags;
+	__u32 lsr;
+
+	/* update line status */
+	spin_lock_irqsave(&priv->status_lock, flags);
+	lsr = priv->lsr;
+	priv->lsr &= ~UART_LSR_BRK_ERROR_BITS;
+	spin_unlock_irqrestore(&priv->status_lock, flags);
+
+	if (!urb->actual_length)
+		return;
+
+	if (lsr & UART_LSR_BRK_ERROR_BITS) {
+		if (lsr & UART_LSR_BI)
+			tty_flag = TTY_BREAK;
+		else if (lsr & UART_LSR_PE)
+			tty_flag = TTY_PARITY;
+		else if (lsr & UART_LSR_FE)
+			tty_flag = TTY_FRAME;
+
+		/* overrun is special, not associated with a char */
+		if (lsr & UART_LSR_OE)
+			tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
+	}
+	tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
+							urb->actual_length);
+	tty_flip_buffer_push(&port->port);
+}
+
+static struct usb_serial_driver ark3116_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"ark3116",
+	},
+	.id_table =		id_table,
+	.num_ports =		1,
+	.num_bulk_in =		1,
+	.num_bulk_out =		1,
+	.num_interrupt_in =	1,
+	.port_probe =		ark3116_port_probe,
+	.port_remove =		ark3116_port_remove,
+	.set_termios =		ark3116_set_termios,
+	.tiocmget =		ark3116_tiocmget,
+	.tiocmset =		ark3116_tiocmset,
+	.tiocmiwait =		usb_serial_generic_tiocmiwait,
+	.get_icount =		usb_serial_generic_get_icount,
+	.open =			ark3116_open,
+	.close =		ark3116_close,
+	.break_ctl = 		ark3116_break_ctl,
+	.read_int_callback = 	ark3116_read_int_callback,
+	.process_read_urb =	ark3116_process_read_urb,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ark3116_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_LICENSE("GPL");
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+
+/*
+ * The following describes what I learned from studying the old
+ * ark3116.c driver, disassembling the windows driver, and some lucky
+ * guesses. Since I do not have any datasheet or other
+ * documentation, inaccuracies are almost guaranteed.
+ *
+ * Some specs for the ARK3116 can be found here:
+ * http://web.archive.org/web/20060318000438/
+ *   www.arkmicro.com/en/products/view.php?id=10
+ * On that page, 2 GPIO pins are mentioned: I assume these are the
+ * OUT1 and OUT2 pins of the UART, so I added support for those
+ * through the MCR. Since the pins are not available on my hardware,
+ * I could not verify this.
+ * Also, it states there is "on-chip hardware flow control". I have
+ * discovered how to enable that. Unfortunately, I do not know how to
+ * enable XON/XOFF (software) flow control, which would need support
+ * from the chip as well to work. Because of the wording on the web
+ * page there is a real possibility the chip simply does not support
+ * software flow control.
+ *
+ * I got my ark3116 as part of a mobile phone adapter cable. On the
+ * PCB, the following numbered contacts are present:
+ *
+ *  1:- +5V
+ *  2:o DTR
+ *  3:i RX
+ *  4:i DCD
+ *  5:o RTS
+ *  6:o TX
+ *  7:i RI
+ *  8:i DSR
+ * 10:- 0V
+ * 11:i CTS
+ *
+ * On my chip, all signals seem to be 3.3V, but 5V tolerant. But that
+ * may be different for the one you have ;-).
+ *
+ * The windows driver limits the registers to 0-F, so I assume there
+ * are actually 16 present on the device.
+ *
+ * On an UART interrupt, 4 bytes of data come in on the interrupt
+ * endpoint. The bytes are 0xe8 IIR LSR MSR.
+ *
+ * The baudrate seems to be generated from the 12MHz crystal, using
+ * 4-times subsampling. So quot=12e6/(4*baud). Also see description
+ * of register E.
+ *
+ * Registers 0-7:
+ * These seem to be the same as for a regular 16450. The FCR is set
+ * to UART_FCR_DMA_SELECT (0x8), I guess to enable transfers between
+ * the UART and the USB bridge/DMA engine.
+ *
+ * Register 8:
+ * By trial and error, I found out that bit 0 enables hardware CTS,
+ * stopping TX when CTS is +5V. Bit 1 does the same for RTS, making
+ * RTS +5V when the 3116 cannot transfer the data to the USB bus
+ * (verified by disabling the reading URB). Note that as far as I can
+ * tell, the windows driver does NOT use this, so there might be some
+ * hardware bug or something.
+ *
+ * According to a patch provided here
+ * https://lore.kernel.org/lkml/200907261419.50702.linux@rainbow-software.org
+ * the ARK3116 can also be used as an IrDA dongle. Since I do not have
+ * such a thing, I could not investigate that aspect. However, I can
+ * speculate ;-).
+ *
+ * - IrDA encodes data differently than RS232. Most likely, one of
+ *   the bits in registers 9..E enables the IR ENDEC (encoder/decoder).
+ * - Depending on the IR transceiver, the input and output need to be
+ *   inverted, so there are probably bits for that as well.
+ * - IrDA is half-duplex, so there should be a bit for selecting that.
+ *
+ * This still leaves at least two registers unaccounted for. Perhaps
+ * The chip can do XON/XOFF or CRC in HW?
+ *
+ * Register 9:
+ * Set to 0x00 for IrDA, when the baudrate is initialised.
+ *
+ * Register A:
+ * Set to 0x01 for IrDA, at init.
+ *
+ * Register B:
+ * Set to 0x01 for IrDA, 0x00 for RS232, at init.
+ *
+ * Register C:
+ * Set to 00 for IrDA, at init.
+ *
+ * Register D:
+ * Set to 0x41 for IrDA, at init.
+ *
+ * Register E:
+ * Somekind of baudrate override. The windows driver seems to set
+ * this to 0x00 for normal baudrates, 0x01 for 460800, 0x02 for 921600.
+ * Since 460800 and 921600 cannot be obtained by dividing 3MHz by an integer,
+ * it could be somekind of subdivisor thingy.
+ * However,it does not seem to do anything: selecting 921600 (divisor 3,
+ * reg E=2), still gets 1 MHz. I also checked if registers 9, C or F would
+ * work, but they don't.
+ *
+ * Register F: unknown
+ */
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
new file mode 100644
index 000000000..9331a562d
--- /dev/null
+++ b/drivers/usb/serial/belkin_sa.c
@@ -0,0 +1,479 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Belkin USB Serial Adapter Driver
+ *
+ *  Copyright (C) 2000		William Greathouse (wgreathouse@smva.com)
+ *  Copyright (C) 2000-2001	Greg Kroah-Hartman (greg@kroah.com)
+ *  Copyright (C) 2010		Johan Hovold (jhovold@gmail.com)
+ *
+ *  This program is largely derived from work by the linux-usb group
+ *  and associated source files.  Please see the usb/serial files for
+ *  individual credits and copyrights.
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ *
+ * TODO:
+ * -- Add true modem control line query capability.  Currently we track the
+ *    states reported by the interrupt and the states we request.
+ * -- Add support for flush commands
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include "belkin_sa.h"
+
+#define DRIVER_AUTHOR "William Greathouse <wgreathouse@smva.com>"
+#define DRIVER_DESC "USB Belkin Serial converter driver"
+
+/* function prototypes for a Belkin USB Serial Adapter F5U103 */
+static int belkin_sa_port_probe(struct usb_serial_port *port);
+static void belkin_sa_port_remove(struct usb_serial_port *port);
+static int  belkin_sa_open(struct tty_struct *tty,
+			struct usb_serial_port *port);
+static void belkin_sa_close(struct usb_serial_port *port);
+static void belkin_sa_read_int_callback(struct urb *urb);
+static void belkin_sa_process_read_urb(struct urb *urb);
+static void belkin_sa_set_termios(struct tty_struct *tty,
+				  struct usb_serial_port *port,
+				  const struct ktermios *old_termios);
+static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state);
+static int  belkin_sa_tiocmget(struct tty_struct *tty);
+static int  belkin_sa_tiocmset(struct tty_struct *tty,
+					unsigned int set, unsigned int clear);
+
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) },
+	{ USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) },
+	{ USB_DEVICE(PERACOM_VID, PERACOM_PID) },
+	{ USB_DEVICE(GOHUBS_VID, GOHUBS_PID) },
+	{ USB_DEVICE(GOHUBS_VID, HANDYLINK_PID) },
+	{ USB_DEVICE(BELKIN_DOCKSTATION_VID, BELKIN_DOCKSTATION_PID) },
+	{ }	/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* All of the device info needed for the serial converters */
+static struct usb_serial_driver belkin_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"belkin",
+	},
+	.description =		"Belkin / Peracom / GoHubs USB Serial Adapter",
+	.id_table =		id_table,
+	.num_ports =		1,
+	.open =			belkin_sa_open,
+	.close =		belkin_sa_close,
+	.read_int_callback =	belkin_sa_read_int_callback,
+	.process_read_urb =	belkin_sa_process_read_urb,
+	.set_termios =		belkin_sa_set_termios,
+	.break_ctl =		belkin_sa_break_ctl,
+	.tiocmget =		belkin_sa_tiocmget,
+	.tiocmset =		belkin_sa_tiocmset,
+	.port_probe =		belkin_sa_port_probe,
+	.port_remove =		belkin_sa_port_remove,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&belkin_device, NULL
+};
+
+struct belkin_sa_private {
+	spinlock_t		lock;
+	unsigned long		control_state;
+	unsigned char		last_lsr;
+	unsigned char		last_msr;
+	int			bad_flow_control;
+};
+
+
+/*
+ * ***************************************************************************
+ * Belkin USB Serial Adapter F5U103 specific driver functions
+ * ***************************************************************************
+ */
+
+#define WDR_TIMEOUT 5000 /* default urb timeout */
+
+/* assumes that struct usb_serial *serial is available */
+#define BSA_USB_CMD(c, v) usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), \
+					    (c), BELKIN_SA_SET_REQUEST_TYPE, \
+					    (v), 0, NULL, 0, WDR_TIMEOUT)
+
+static int belkin_sa_port_probe(struct usb_serial_port *port)
+{
+	struct usb_device *dev = port->serial->dev;
+	struct belkin_sa_private *priv;
+
+	priv = kmalloc(sizeof(struct belkin_sa_private), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+	priv->control_state = 0;
+	priv->last_lsr = 0;
+	priv->last_msr = 0;
+	/* see comments at top of file */
+	priv->bad_flow_control =
+		(le16_to_cpu(dev->descriptor.bcdDevice) <= 0x0206) ? 1 : 0;
+	dev_info(&dev->dev, "bcdDevice: %04x, bfc: %d\n",
+					le16_to_cpu(dev->descriptor.bcdDevice),
+					priv->bad_flow_control);
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
+}
+
+static void belkin_sa_port_remove(struct usb_serial_port *port)
+{
+	struct belkin_sa_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+}
+
+static int belkin_sa_open(struct tty_struct *tty,
+					struct usb_serial_port *port)
+{
+	int retval;
+
+	retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (retval) {
+		dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
+		return retval;
+	}
+
+	retval = usb_serial_generic_open(tty, port);
+	if (retval)
+		usb_kill_urb(port->interrupt_in_urb);
+
+	return retval;
+}
+
+static void belkin_sa_close(struct usb_serial_port *port)
+{
+	usb_serial_generic_close(port);
+	usb_kill_urb(port->interrupt_in_urb);
+}
+
+static void belkin_sa_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct belkin_sa_private *priv;
+	unsigned char *data = urb->transfer_buffer;
+	int retval;
+	int status = urb->status;
+	unsigned long flags;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
+		return;
+	default:
+		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
+		goto exit;
+	}
+
+	usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
+
+	/* Handle known interrupt data */
+	/* ignore data[0] and data[1] */
+
+	priv = usb_get_serial_port_data(port);
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->last_msr = data[BELKIN_SA_MSR_INDEX];
+
+	/* Record Control Line states */
+	if (priv->last_msr & BELKIN_SA_MSR_DSR)
+		priv->control_state |= TIOCM_DSR;
+	else
+		priv->control_state &= ~TIOCM_DSR;
+
+	if (priv->last_msr & BELKIN_SA_MSR_CTS)
+		priv->control_state |= TIOCM_CTS;
+	else
+		priv->control_state &= ~TIOCM_CTS;
+
+	if (priv->last_msr & BELKIN_SA_MSR_RI)
+		priv->control_state |= TIOCM_RI;
+	else
+		priv->control_state &= ~TIOCM_RI;
+
+	if (priv->last_msr & BELKIN_SA_MSR_CD)
+		priv->control_state |= TIOCM_CD;
+	else
+		priv->control_state &= ~TIOCM_CD;
+
+	priv->last_lsr = data[BELKIN_SA_LSR_INDEX];
+	spin_unlock_irqrestore(&priv->lock, flags);
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&port->dev, "%s - usb_submit_urb failed with "
+			"result %d\n", __func__, retval);
+}
+
+static void belkin_sa_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
+	unsigned char *data = urb->transfer_buffer;
+	unsigned long flags;
+	unsigned char status;
+	char tty_flag;
+
+	/* Update line status */
+	tty_flag = TTY_NORMAL;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	status = priv->last_lsr;
+	priv->last_lsr &= ~BELKIN_SA_LSR_ERR;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (!urb->actual_length)
+		return;
+
+	if (status & BELKIN_SA_LSR_ERR) {
+		/* Break takes precedence over parity, which takes precedence
+		 * over framing errors. */
+		if (status & BELKIN_SA_LSR_BI)
+			tty_flag = TTY_BREAK;
+		else if (status & BELKIN_SA_LSR_PE)
+			tty_flag = TTY_PARITY;
+		else if (status & BELKIN_SA_LSR_FE)
+			tty_flag = TTY_FRAME;
+		dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
+
+		/* Overrun is special, not associated with a char. */
+		if (status & BELKIN_SA_LSR_OE)
+			tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
+	}
+
+	tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
+							urb->actual_length);
+	tty_flip_buffer_push(&port->port);
+}
+
+static void belkin_sa_set_termios(struct tty_struct *tty,
+				  struct usb_serial_port *port,
+				  const struct ktermios *old_termios)
+{
+	struct usb_serial *serial = port->serial;
+	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
+	unsigned int iflag;
+	unsigned int cflag;
+	unsigned int old_iflag = 0;
+	unsigned int old_cflag = 0;
+	__u16 urb_value = 0; /* Will hold the new flags */
+	unsigned long flags;
+	unsigned long control_state;
+	int bad_flow_control;
+	speed_t baud;
+	struct ktermios *termios = &tty->termios;
+
+	iflag = termios->c_iflag;
+	cflag = termios->c_cflag;
+
+	termios->c_cflag &= ~CMSPAR;
+
+	/* get a local copy of the current port settings */
+	spin_lock_irqsave(&priv->lock, flags);
+	control_state = priv->control_state;
+	bad_flow_control = priv->bad_flow_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	old_iflag = old_termios->c_iflag;
+	old_cflag = old_termios->c_cflag;
+
+	/* Set the baud rate */
+	if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
+		/* reassert DTR and (maybe) RTS on transition from B0 */
+		if ((old_cflag & CBAUD) == B0) {
+			control_state |= (TIOCM_DTR|TIOCM_RTS);
+			if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 1) < 0)
+				dev_err(&port->dev, "Set DTR error\n");
+			/* don't set RTS if using hardware flow control */
+			if (!(old_cflag & CRTSCTS))
+				if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST
+								, 1) < 0)
+					dev_err(&port->dev, "Set RTS error\n");
+		}
+	}
+
+	baud = tty_get_baud_rate(tty);
+	if (baud) {
+		urb_value = BELKIN_SA_BAUD(baud);
+		/* Clip to maximum speed */
+		if (urb_value == 0)
+			urb_value = 1;
+		/* Turn it back into a resulting real baud rate */
+		baud = BELKIN_SA_BAUD(urb_value);
+
+		/* Report the actual baud rate back to the caller */
+		tty_encode_baud_rate(tty, baud, baud);
+		if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value) < 0)
+			dev_err(&port->dev, "Set baudrate error\n");
+	} else {
+		/* Disable flow control */
+		if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST,
+						BELKIN_SA_FLOW_NONE) < 0)
+			dev_err(&port->dev, "Disable flowcontrol error\n");
+		/* Drop RTS and DTR */
+		control_state &= ~(TIOCM_DTR | TIOCM_RTS);
+		if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 0) < 0)
+			dev_err(&port->dev, "DTR LOW error\n");
+		if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 0) < 0)
+			dev_err(&port->dev, "RTS LOW error\n");
+	}
+
+	/* set the parity */
+	if ((cflag ^ old_cflag) & (PARENB | PARODD)) {
+		if (cflag & PARENB)
+			urb_value = (cflag & PARODD) ?  BELKIN_SA_PARITY_ODD
+						: BELKIN_SA_PARITY_EVEN;
+		else
+			urb_value = BELKIN_SA_PARITY_NONE;
+		if (BSA_USB_CMD(BELKIN_SA_SET_PARITY_REQUEST, urb_value) < 0)
+			dev_err(&port->dev, "Set parity error\n");
+	}
+
+	/* set the number of data bits */
+	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
+		urb_value = BELKIN_SA_DATA_BITS(tty_get_char_size(cflag));
+		if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value) < 0)
+			dev_err(&port->dev, "Set data bits error\n");
+	}
+
+	/* set the number of stop bits */
+	if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
+		urb_value = (cflag & CSTOPB) ? BELKIN_SA_STOP_BITS(2)
+						: BELKIN_SA_STOP_BITS(1);
+		if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST,
+							urb_value) < 0)
+			dev_err(&port->dev, "Set stop bits error\n");
+	}
+
+	/* Set flow control */
+	if (((iflag ^ old_iflag) & (IXOFF | IXON)) ||
+		((cflag ^ old_cflag) & CRTSCTS)) {
+		urb_value = 0;
+		if ((iflag & IXOFF) || (iflag & IXON))
+			urb_value |= (BELKIN_SA_FLOW_OXON | BELKIN_SA_FLOW_IXON);
+		else
+			urb_value &= ~(BELKIN_SA_FLOW_OXON | BELKIN_SA_FLOW_IXON);
+
+		if (cflag & CRTSCTS)
+			urb_value |=  (BELKIN_SA_FLOW_OCTS | BELKIN_SA_FLOW_IRTS);
+		else
+			urb_value &= ~(BELKIN_SA_FLOW_OCTS | BELKIN_SA_FLOW_IRTS);
+
+		if (bad_flow_control)
+			urb_value &= ~(BELKIN_SA_FLOW_IRTS);
+
+		if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, urb_value) < 0)
+			dev_err(&port->dev, "Set flow control error\n");
+	}
+
+	/* save off the modified port settings */
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->control_state = control_state;
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
+
+	if (BSA_USB_CMD(BELKIN_SA_SET_BREAK_REQUEST, break_state ? 1 : 0) < 0)
+		dev_err(&port->dev, "Set break_ctl %d\n", break_state);
+}
+
+static int belkin_sa_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
+	unsigned long control_state;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	control_state = priv->control_state;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return control_state;
+}
+
+static int belkin_sa_tiocmset(struct tty_struct *tty,
+			       unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
+	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
+	unsigned long control_state;
+	unsigned long flags;
+	int retval;
+	int rts = 0;
+	int dtr = 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	control_state = priv->control_state;
+
+	if (set & TIOCM_RTS) {
+		control_state |= TIOCM_RTS;
+		rts = 1;
+	}
+	if (set & TIOCM_DTR) {
+		control_state |= TIOCM_DTR;
+		dtr = 1;
+	}
+	if (clear & TIOCM_RTS) {
+		control_state &= ~TIOCM_RTS;
+		rts = 0;
+	}
+	if (clear & TIOCM_DTR) {
+		control_state &= ~TIOCM_DTR;
+		dtr = 0;
+	}
+
+	priv->control_state = control_state;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	retval = BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, rts);
+	if (retval < 0) {
+		dev_err(&port->dev, "Set RTS error %d\n", retval);
+		goto exit;
+	}
+
+	retval = BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, dtr);
+	if (retval < 0) {
+		dev_err(&port->dev, "Set DTR error %d\n", retval);
+		goto exit;
+	}
+exit:
+	return retval;
+}
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/belkin_sa.h b/drivers/usb/serial/belkin_sa.h
new file mode 100644
index 000000000..89ec30c63
--- /dev/null
+++ b/drivers/usb/serial/belkin_sa.h
@@ -0,0 +1,120 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Definitions for Belkin USB Serial Adapter Driver
+ *
+ *  Copyright (C) 2000
+ *      William Greathouse (wgreathouse@smva.com)
+ *
+ *  This program is largely derived from work by the linux-usb group
+ *  and associated source files.  Please see the usb/serial files for
+ *  individual credits and copyrights.
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ *
+ * 12-Mar-2001 gkh
+ *	Added GoHubs GO-COM232 device id.
+ *
+ * 06-Nov-2000 gkh
+ *	Added old Belkin and Peracom device ids, which this driver supports
+ *
+ * 12-Oct-2000 William Greathouse
+ *    First cut at supporting Belkin USB Serial Adapter F5U103
+ *    I did not have a copy of the original work to support this
+ *    adapter, so pardon any stupid mistakes.  All of the information
+ *    I am using to write this driver was acquired by using a modified
+ *    UsbSnoop on Windows2000.
+ *
+ */
+
+#ifndef __LINUX_USB_SERIAL_BSA_H
+#define __LINUX_USB_SERIAL_BSA_H
+
+#define BELKIN_DOCKSTATION_VID	0x050d	/* Vendor Id */
+#define BELKIN_DOCKSTATION_PID	0x1203	/* Product Id */
+
+#define BELKIN_SA_VID	0x050d	/* Vendor Id */
+#define BELKIN_SA_PID	0x0103	/* Product Id */
+
+#define BELKIN_OLD_VID	0x056c	/* Belkin's "old" vendor id */
+#define BELKIN_OLD_PID	0x8007	/* Belkin's "old" single port serial converter's id */
+
+#define PERACOM_VID	0x0565	/* Peracom's vendor id */
+#define PERACOM_PID	0x0001	/* Peracom's single port serial converter's id */
+
+#define GOHUBS_VID	0x0921	/* GoHubs vendor id */
+#define GOHUBS_PID	0x1000	/* GoHubs single port serial converter's id (identical to the Peracom device) */
+#define HANDYLINK_PID	0x1200	/* HandyLink USB's id (identical to the Peracom device) */
+
+/* Vendor Request Interface */
+#define BELKIN_SA_SET_BAUDRATE_REQUEST	0  /* Set baud rate */
+#define BELKIN_SA_SET_STOP_BITS_REQUEST	1  /* Set stop bits (1,2) */
+#define BELKIN_SA_SET_DATA_BITS_REQUEST	2  /* Set data bits (5,6,7,8) */
+#define BELKIN_SA_SET_PARITY_REQUEST	3  /* Set parity (None, Even, Odd) */
+
+#define BELKIN_SA_SET_DTR_REQUEST	10 /* Set DTR state */
+#define BELKIN_SA_SET_RTS_REQUEST	11 /* Set RTS state */
+#define BELKIN_SA_SET_BREAK_REQUEST	12 /* Set BREAK state */
+
+#define BELKIN_SA_SET_FLOW_CTRL_REQUEST	16 /* Set flow control mode */
+
+
+#ifdef WHEN_I_LEARN_THIS
+#define BELKIN_SA_SET_MAGIC_REQUEST	17 /* I don't know, possibly flush */
+					   /* (always in Wininit sequence before flow control) */
+#define BELKIN_SA_RESET			xx /* Reset the port */
+#define BELKIN_SA_GET_MODEM_STATUS	xx /* Force return of modem status register */
+#endif
+
+#define BELKIN_SA_SET_REQUEST_TYPE	0x40
+
+#define BELKIN_SA_BAUD(b)		(230400/b)
+
+#define BELKIN_SA_STOP_BITS(b)		(b-1)
+
+#define BELKIN_SA_DATA_BITS(b)		(b-5)
+
+#define BELKIN_SA_PARITY_NONE		0
+#define BELKIN_SA_PARITY_EVEN		1
+#define BELKIN_SA_PARITY_ODD		2
+#define BELKIN_SA_PARITY_MARK		3
+#define BELKIN_SA_PARITY_SPACE		4
+
+#define BELKIN_SA_FLOW_NONE		0x0000	/* No flow control */
+#define BELKIN_SA_FLOW_OCTS		0x0001	/* use CTS input to throttle output */
+#define BELKIN_SA_FLOW_ODSR		0x0002	/* use DSR input to throttle output */
+#define BELKIN_SA_FLOW_IDSR		0x0004	/* use DSR input to enable receive */
+#define BELKIN_SA_FLOW_IDTR		0x0008	/* use DTR output for input flow control */
+#define BELKIN_SA_FLOW_IRTS		0x0010	/* use RTS output for input flow control */
+#define BELKIN_SA_FLOW_ORTS		0x0020	/* use RTS to indicate data available to send */
+#define BELKIN_SA_FLOW_ERRSUB		0x0040	/* ???? guess ???? substitute inline errors */
+#define BELKIN_SA_FLOW_OXON		0x0080	/* use XON/XOFF for output flow control */
+#define BELKIN_SA_FLOW_IXON		0x0100	/* use XON/XOFF for input flow control */
+
+/*
+ * It seems that the interrupt pipe is closely modelled after the
+ * 16550 register layout.  This is probably because the adapter can
+ * be used in a "DOS" environment to simulate a standard hardware port.
+ */
+#define BELKIN_SA_LSR_INDEX		2	/*     Line Status Register */
+#define BELKIN_SA_LSR_RDR		0x01	/* receive data ready */
+#define BELKIN_SA_LSR_OE		0x02	/* overrun error */
+#define BELKIN_SA_LSR_PE		0x04	/* parity error */
+#define BELKIN_SA_LSR_FE		0x08	/* framing error */
+#define BELKIN_SA_LSR_BI		0x10	/* break indicator */
+#define BELKIN_SA_LSR_THE		0x20	/* tx holding register empty */
+#define BELKIN_SA_LSR_TE		0x40	/* transmit register empty */
+#define BELKIN_SA_LSR_ERR		0x80	/* OE | PE | FE | BI */
+
+#define BELKIN_SA_MSR_INDEX		3	/*     Modem Status Register */
+#define BELKIN_SA_MSR_DCTS		0x01	/* Delta CTS */
+#define BELKIN_SA_MSR_DDSR		0x02	/* Delta DSR */
+#define BELKIN_SA_MSR_DRI		0x04	/* Delta RI */
+#define BELKIN_SA_MSR_DCD		0x08	/* Delta CD */
+#define BELKIN_SA_MSR_CTS		0x10	/* Current CTS */
+#define BELKIN_SA_MSR_DSR		0x20	/* Current DSR */
+#define BELKIN_SA_MSR_RI		0x40	/* Current RI */
+#define BELKIN_SA_MSR_CD		0x80	/* Current CD */
+
+#endif /* __LINUX_USB_SERIAL_BSA_H */
+
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
new file mode 100644
index 000000000..9e38142ac
--- /dev/null
+++ b/drivers/usb/serial/bus.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Serial Converter Bus specific functions
+ *
+ * Copyright (C) 2002 Greg Kroah-Hartman (greg@kroah.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static int usb_serial_device_match(struct device *dev,
+						struct device_driver *drv)
+{
+	const struct usb_serial_port *port = to_usb_serial_port(dev);
+	struct usb_serial_driver *driver = to_usb_serial_driver(drv);
+
+	/*
+	 * drivers are already assigned to ports in serial_probe so it's
+	 * a simple check here.
+	 */
+	if (driver == port->serial->type)
+		return 1;
+
+	return 0;
+}
+
+static int usb_serial_device_probe(struct device *dev)
+{
+	struct usb_serial_port *port = to_usb_serial_port(dev);
+	struct usb_serial_driver *driver;
+	struct device *tty_dev;
+	int retval = 0;
+	int minor;
+
+	/* make sure suspend/resume doesn't race against port_probe */
+	retval = usb_autopm_get_interface(port->serial->interface);
+	if (retval)
+		return retval;
+
+	driver = port->serial->type;
+	if (driver->port_probe) {
+		retval = driver->port_probe(port);
+		if (retval)
+			goto err_autopm_put;
+	}
+
+	minor = port->minor;
+	tty_dev = tty_port_register_device(&port->port, usb_serial_tty_driver,
+					   minor, dev);
+	if (IS_ERR(tty_dev)) {
+		retval = PTR_ERR(tty_dev);
+		goto err_port_remove;
+	}
+
+	usb_autopm_put_interface(port->serial->interface);
+
+	dev_info(&port->serial->dev->dev,
+		 "%s converter now attached to ttyUSB%d\n",
+		 driver->description, minor);
+
+	return 0;
+
+err_port_remove:
+	if (driver->port_remove)
+		driver->port_remove(port);
+err_autopm_put:
+	usb_autopm_put_interface(port->serial->interface);
+
+	return retval;
+}
+
+static void usb_serial_device_remove(struct device *dev)
+{
+	struct usb_serial_port *port = to_usb_serial_port(dev);
+	struct usb_serial_driver *driver;
+	int minor;
+	int autopm_err;
+
+	/*
+	 * Make sure suspend/resume doesn't race against port_remove.
+	 *
+	 * Note that no further runtime PM callbacks will be made if
+	 * autopm_get fails.
+	 */
+	autopm_err = usb_autopm_get_interface(port->serial->interface);
+
+	minor = port->minor;
+	tty_unregister_device(usb_serial_tty_driver, minor);
+
+	driver = port->serial->type;
+	if (driver->port_remove)
+		driver->port_remove(port);
+
+	dev_info(dev, "%s converter now disconnected from ttyUSB%d\n",
+		 driver->description, minor);
+
+	if (!autopm_err)
+		usb_autopm_put_interface(port->serial->interface);
+}
+
+static ssize_t new_id_store(struct device_driver *driver,
+			    const char *buf, size_t count)
+{
+	struct usb_serial_driver *usb_drv = to_usb_serial_driver(driver);
+	ssize_t retval = usb_store_new_id(&usb_drv->dynids, usb_drv->id_table,
+					 driver, buf, count);
+
+	if (retval >= 0 && usb_drv->usb_driver != NULL)
+		retval = usb_store_new_id(&usb_drv->usb_driver->dynids,
+					  usb_drv->usb_driver->id_table,
+					  &usb_drv->usb_driver->drvwrap.driver,
+					  buf, count);
+	return retval;
+}
+
+static ssize_t new_id_show(struct device_driver *driver, char *buf)
+{
+	struct usb_serial_driver *usb_drv = to_usb_serial_driver(driver);
+
+	return usb_show_dynids(&usb_drv->dynids, buf);
+}
+static DRIVER_ATTR_RW(new_id);
+
+static struct attribute *usb_serial_drv_attrs[] = {
+	&driver_attr_new_id.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(usb_serial_drv);
+
+static void free_dynids(struct usb_serial_driver *drv)
+{
+	struct usb_dynid *dynid, *n;
+
+	spin_lock(&drv->dynids.lock);
+	list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) {
+		list_del(&dynid->node);
+		kfree(dynid);
+	}
+	spin_unlock(&drv->dynids.lock);
+}
+
+struct bus_type usb_serial_bus_type = {
+	.name =		"usb-serial",
+	.match =	usb_serial_device_match,
+	.probe =	usb_serial_device_probe,
+	.remove =	usb_serial_device_remove,
+	.drv_groups = 	usb_serial_drv_groups,
+};
+
+int usb_serial_bus_register(struct usb_serial_driver *driver)
+{
+	int retval;
+
+	driver->driver.bus = &usb_serial_bus_type;
+	spin_lock_init(&driver->dynids.lock);
+	INIT_LIST_HEAD(&driver->dynids.list);
+
+	retval = driver_register(&driver->driver);
+
+	return retval;
+}
+
+void usb_serial_bus_deregister(struct usb_serial_driver *driver)
+{
+	free_dynids(driver);
+	driver_unregister(&driver->driver);
+}
+
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
new file mode 100644
index 000000000..6e1b87e67
--- /dev/null
+++ b/drivers/usb/serial/ch341.c
@@ -0,0 +1,857 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk>
+ * Copyright 2007, Werner Cornelius <werner@cornelius-consult.de>
+ * Copyright 2009, Boris Hajduk <boris@hajduk.org>
+ *
+ * ch341.c implements a serial port driver for the Winchiphead CH341.
+ *
+ * The CH341 device can be used to implement an RS232 asynchronous
+ * serial port, an IEEE-1284 parallel printer port or a memory-like
+ * interface. In all cases the CH341 supports an I2C interface as well.
+ * This driver only supports the asynchronous serial interface.
+ */
+
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial.h>
+#include <asm/unaligned.h>
+
+#define DEFAULT_BAUD_RATE 9600
+#define DEFAULT_TIMEOUT   1000
+
+/* flags for IO-Bits */
+#define CH341_BIT_RTS (1 << 6)
+#define CH341_BIT_DTR (1 << 5)
+
+/******************************/
+/* interrupt pipe definitions */
+/******************************/
+/* always 4 interrupt bytes */
+/* first irq byte normally 0x08 */
+/* second irq byte base 0x7d + below */
+/* third irq byte base 0x94 + below */
+/* fourth irq byte normally 0xee */
+
+/* second interrupt byte */
+#define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */
+
+/* status returned in third interrupt answer byte, inverted in data
+   from irq */
+#define CH341_BIT_CTS 0x01
+#define CH341_BIT_DSR 0x02
+#define CH341_BIT_RI  0x04
+#define CH341_BIT_DCD 0x08
+#define CH341_BITS_MODEM_STAT 0x0f /* all bits */
+
+/* Break support - the information used to implement this was gleaned from
+ * the Net/FreeBSD uchcom.c driver by Takanori Watanabe.  Domo arigato.
+ */
+
+#define CH341_REQ_READ_VERSION 0x5F
+#define CH341_REQ_WRITE_REG    0x9A
+#define CH341_REQ_READ_REG     0x95
+#define CH341_REQ_SERIAL_INIT  0xA1
+#define CH341_REQ_MODEM_CTRL   0xA4
+
+#define CH341_REG_BREAK        0x05
+#define CH341_REG_PRESCALER    0x12
+#define CH341_REG_DIVISOR      0x13
+#define CH341_REG_LCR          0x18
+#define CH341_REG_LCR2         0x25
+
+#define CH341_NBREAK_BITS      0x01
+
+#define CH341_LCR_ENABLE_RX    0x80
+#define CH341_LCR_ENABLE_TX    0x40
+#define CH341_LCR_MARK_SPACE   0x20
+#define CH341_LCR_PAR_EVEN     0x10
+#define CH341_LCR_ENABLE_PAR   0x08
+#define CH341_LCR_STOP_BITS_2  0x04
+#define CH341_LCR_CS8          0x03
+#define CH341_LCR_CS7          0x02
+#define CH341_LCR_CS6          0x01
+#define CH341_LCR_CS5          0x00
+
+#define CH341_QUIRK_LIMITED_PRESCALER	BIT(0)
+#define CH341_QUIRK_SIMULATE_BREAK	BIT(1)
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x1a86, 0x5523) },
+	{ USB_DEVICE(0x1a86, 0x7522) },
+	{ USB_DEVICE(0x1a86, 0x7523) },
+	{ USB_DEVICE(0x2184, 0x0057) },
+	{ USB_DEVICE(0x4348, 0x5523) },
+	{ USB_DEVICE(0x9986, 0x7523) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct ch341_private {
+	spinlock_t lock; /* access lock */
+	unsigned baud_rate; /* set baud rate */
+	u8 mcr;
+	u8 msr;
+	u8 lcr;
+
+	unsigned long quirks;
+	u8 version;
+
+	unsigned long break_end;
+};
+
+static void ch341_set_termios(struct tty_struct *tty,
+			      struct usb_serial_port *port,
+			      const struct ktermios *old_termios);
+
+static int ch341_control_out(struct usb_device *dev, u8 request,
+			     u16 value, u16 index)
+{
+	int r;
+
+	dev_dbg(&dev->dev, "%s - (%02x,%04x,%04x)\n", __func__,
+		request, value, index);
+
+	r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
+			    USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+			    value, index, NULL, 0, DEFAULT_TIMEOUT);
+	if (r < 0)
+		dev_err(&dev->dev, "failed to send control message: %d\n", r);
+
+	return r;
+}
+
+static int ch341_control_in(struct usb_device *dev,
+			    u8 request, u16 value, u16 index,
+			    char *buf, unsigned bufsize)
+{
+	int r;
+
+	dev_dbg(&dev->dev, "%s - (%02x,%04x,%04x,%u)\n", __func__,
+		request, value, index, bufsize);
+
+	r = usb_control_msg_recv(dev, 0, request,
+				 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+				 value, index, buf, bufsize, DEFAULT_TIMEOUT,
+				 GFP_KERNEL);
+	if (r) {
+		dev_err(&dev->dev, "failed to receive control message: %d\n",
+			r);
+		return r;
+	}
+
+	return 0;
+}
+
+#define CH341_CLKRATE		48000000
+#define CH341_CLK_DIV(ps, fact)	(1 << (12 - 3 * (ps) - (fact)))
+#define CH341_MIN_RATE(ps)	(CH341_CLKRATE / (CH341_CLK_DIV((ps), 1) * 512))
+
+static const speed_t ch341_min_rates[] = {
+	CH341_MIN_RATE(0),
+	CH341_MIN_RATE(1),
+	CH341_MIN_RATE(2),
+	CH341_MIN_RATE(3),
+};
+
+/* Supported range is 46 to 3000000 bps. */
+#define CH341_MIN_BPS	DIV_ROUND_UP(CH341_CLKRATE, CH341_CLK_DIV(0, 0) * 256)
+#define CH341_MAX_BPS	(CH341_CLKRATE / (CH341_CLK_DIV(3, 0) * 2))
+
+/*
+ * The device line speed is given by the following equation:
+ *
+ *	baudrate = 48000000 / (2^(12 - 3 * ps - fact) * div), where
+ *
+ *		0 <= ps <= 3,
+ *		0 <= fact <= 1,
+ *		2 <= div <= 256 if fact = 0, or
+ *		9 <= div <= 256 if fact = 1
+ */
+static int ch341_get_divisor(struct ch341_private *priv, speed_t speed)
+{
+	unsigned int fact, div, clk_div;
+	bool force_fact0 = false;
+	int ps;
+
+	/*
+	 * Clamp to supported range, this makes the (ps < 0) and (div < 2)
+	 * sanity checks below redundant.
+	 */
+	speed = clamp_val(speed, CH341_MIN_BPS, CH341_MAX_BPS);
+
+	/*
+	 * Start with highest possible base clock (fact = 1) that will give a
+	 * divisor strictly less than 512.
+	 */
+	fact = 1;
+	for (ps = 3; ps >= 0; ps--) {
+		if (speed > ch341_min_rates[ps])
+			break;
+	}
+
+	if (ps < 0)
+		return -EINVAL;
+
+	/* Determine corresponding divisor, rounding down. */
+	clk_div = CH341_CLK_DIV(ps, fact);
+	div = CH341_CLKRATE / (clk_div * speed);
+
+	/* Some devices require a lower base clock if ps < 3. */
+	if (ps < 3 && (priv->quirks & CH341_QUIRK_LIMITED_PRESCALER))
+		force_fact0 = true;
+
+	/* Halve base clock (fact = 0) if required. */
+	if (div < 9 || div > 255 || force_fact0) {
+		div /= 2;
+		clk_div *= 2;
+		fact = 0;
+	}
+
+	if (div < 2)
+		return -EINVAL;
+
+	/*
+	 * Pick next divisor if resulting rate is closer to the requested one,
+	 * scale up to avoid rounding errors on low rates.
+	 */
+	if (16 * CH341_CLKRATE / (clk_div * div) - 16 * speed >=
+			16 * speed - 16 * CH341_CLKRATE / (clk_div * (div + 1)))
+		div++;
+
+	/*
+	 * Prefer lower base clock (fact = 0) if even divisor.
+	 *
+	 * Note that this makes the receiver more tolerant to errors.
+	 */
+	if (fact == 1 && div % 2 == 0) {
+		div /= 2;
+		fact = 0;
+	}
+
+	return (0x100 - div) << 8 | fact << 2 | ps;
+}
+
+static int ch341_set_baudrate_lcr(struct usb_device *dev,
+				  struct ch341_private *priv,
+				  speed_t baud_rate, u8 lcr)
+{
+	int val;
+	int r;
+
+	if (!baud_rate)
+		return -EINVAL;
+
+	val = ch341_get_divisor(priv, baud_rate);
+	if (val < 0)
+		return -EINVAL;
+
+	/*
+	 * CH341A buffers data until a full endpoint-size packet (32 bytes)
+	 * has been received unless bit 7 is set.
+	 *
+	 * At least one device with version 0x27 appears to have this bit
+	 * inverted.
+	 */
+	if (priv->version > 0x27)
+		val |= BIT(7);
+
+	r = ch341_control_out(dev, CH341_REQ_WRITE_REG,
+			      CH341_REG_DIVISOR << 8 | CH341_REG_PRESCALER,
+			      val);
+	if (r)
+		return r;
+
+	/*
+	 * Chip versions before version 0x30 as read using
+	 * CH341_REQ_READ_VERSION used separate registers for line control
+	 * (stop bits, parity and word length). Version 0x30 and above use
+	 * CH341_REG_LCR only and CH341_REG_LCR2 is always set to zero.
+	 */
+	if (priv->version < 0x30)
+		return 0;
+
+	r = ch341_control_out(dev, CH341_REQ_WRITE_REG,
+			      CH341_REG_LCR2 << 8 | CH341_REG_LCR, lcr);
+	if (r)
+		return r;
+
+	return r;
+}
+
+static int ch341_set_handshake(struct usb_device *dev, u8 control)
+{
+	return ch341_control_out(dev, CH341_REQ_MODEM_CTRL, ~control, 0);
+}
+
+static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
+{
+	const unsigned int size = 2;
+	u8 buffer[2];
+	int r;
+	unsigned long flags;
+
+	r = ch341_control_in(dev, CH341_REQ_READ_REG, 0x0706, 0, buffer, size);
+	if (r)
+		return r;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->msr = (~(*buffer)) & CH341_BITS_MODEM_STAT;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
+{
+	const unsigned int size = 2;
+	u8 buffer[2];
+	int r;
+
+	/* expect two bytes 0x27 0x00 */
+	r = ch341_control_in(dev, CH341_REQ_READ_VERSION, 0, 0, buffer, size);
+	if (r)
+		return r;
+
+	priv->version = buffer[0];
+	dev_dbg(&dev->dev, "Chip version: 0x%02x\n", priv->version);
+
+	r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, 0, 0);
+	if (r < 0)
+		return r;
+
+	r = ch341_set_baudrate_lcr(dev, priv, priv->baud_rate, priv->lcr);
+	if (r < 0)
+		return r;
+
+	r = ch341_set_handshake(dev, priv->mcr);
+	if (r < 0)
+		return r;
+
+	return 0;
+}
+
+static int ch341_detect_quirks(struct usb_serial_port *port)
+{
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *udev = port->serial->dev;
+	const unsigned int size = 2;
+	unsigned long quirks = 0;
+	u8 buffer[2];
+	int r;
+
+	/*
+	 * A subset of CH34x devices does not support all features. The
+	 * prescaler is limited and there is no support for sending a RS232
+	 * break condition. A read failure when trying to set up the latter is
+	 * used to detect these devices.
+	 */
+	r = usb_control_msg_recv(udev, 0, CH341_REQ_READ_REG,
+				 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+				 CH341_REG_BREAK, 0, &buffer, size,
+				 DEFAULT_TIMEOUT, GFP_KERNEL);
+	if (r == -EPIPE) {
+		dev_info(&port->dev, "break control not supported, using simulated break\n");
+		quirks = CH341_QUIRK_LIMITED_PRESCALER | CH341_QUIRK_SIMULATE_BREAK;
+		r = 0;
+	} else if (r) {
+		dev_err(&port->dev, "failed to read break control: %d\n", r);
+	}
+
+	if (quirks) {
+		dev_dbg(&port->dev, "enabling quirk flags: 0x%02lx\n", quirks);
+		priv->quirks |= quirks;
+	}
+
+	return r;
+}
+
+static int ch341_port_probe(struct usb_serial_port *port)
+{
+	struct ch341_private *priv;
+	int r;
+
+	priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+	priv->baud_rate = DEFAULT_BAUD_RATE;
+	/*
+	 * Some CH340 devices appear unable to change the initial LCR
+	 * settings, so set a sane 8N1 default.
+	 */
+	priv->lcr = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX | CH341_LCR_CS8;
+
+	r = ch341_configure(port->serial->dev, priv);
+	if (r < 0)
+		goto error;
+
+	usb_set_serial_port_data(port, priv);
+
+	r = ch341_detect_quirks(port);
+	if (r < 0)
+		goto error;
+
+	return 0;
+
+error:	kfree(priv);
+	return r;
+}
+
+static void ch341_port_remove(struct usb_serial_port *port)
+{
+	struct ch341_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+}
+
+static int ch341_carrier_raised(struct usb_serial_port *port)
+{
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	if (priv->msr & CH341_BIT_DCD)
+		return 1;
+	return 0;
+}
+
+static void ch341_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	/* drop DTR and RTS */
+	spin_lock_irqsave(&priv->lock, flags);
+	if (on)
+		priv->mcr |= CH341_BIT_RTS | CH341_BIT_DTR;
+	else
+		priv->mcr &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	ch341_set_handshake(port->serial->dev, priv->mcr);
+}
+
+static void ch341_close(struct usb_serial_port *port)
+{
+	usb_serial_generic_close(port);
+	usb_kill_urb(port->interrupt_in_urb);
+}
+
+
+/* open this device, set default parameters */
+static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	int r;
+
+	if (tty)
+		ch341_set_termios(tty, port, NULL);
+
+	dev_dbg(&port->dev, "%s - submitting interrupt urb\n", __func__);
+	r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (r) {
+		dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n",
+			__func__, r);
+		return r;
+	}
+
+	r = ch341_get_status(port->serial->dev, priv);
+	if (r < 0) {
+		dev_err(&port->dev, "failed to read modem status: %d\n", r);
+		goto err_kill_interrupt_urb;
+	}
+
+	r = usb_serial_generic_open(tty, port);
+	if (r)
+		goto err_kill_interrupt_urb;
+
+	return 0;
+
+err_kill_interrupt_urb:
+	usb_kill_urb(port->interrupt_in_urb);
+
+	return r;
+}
+
+/* Old_termios contains the original termios settings and
+ * tty->termios contains the new setting to be used.
+ */
+static void ch341_set_termios(struct tty_struct *tty,
+			      struct usb_serial_port *port,
+			      const struct ktermios *old_termios)
+{
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	unsigned baud_rate;
+	unsigned long flags;
+	u8 lcr;
+	int r;
+
+	/* redundant changes may cause the chip to lose bytes */
+	if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
+		return;
+
+	baud_rate = tty_get_baud_rate(tty);
+
+	lcr = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX;
+
+	switch (C_CSIZE(tty)) {
+	case CS5:
+		lcr |= CH341_LCR_CS5;
+		break;
+	case CS6:
+		lcr |= CH341_LCR_CS6;
+		break;
+	case CS7:
+		lcr |= CH341_LCR_CS7;
+		break;
+	case CS8:
+		lcr |= CH341_LCR_CS8;
+		break;
+	}
+
+	if (C_PARENB(tty)) {
+		lcr |= CH341_LCR_ENABLE_PAR;
+		if (C_PARODD(tty) == 0)
+			lcr |= CH341_LCR_PAR_EVEN;
+		if (C_CMSPAR(tty))
+			lcr |= CH341_LCR_MARK_SPACE;
+	}
+
+	if (C_CSTOPB(tty))
+		lcr |= CH341_LCR_STOP_BITS_2;
+
+	if (baud_rate) {
+		priv->baud_rate = baud_rate;
+
+		r = ch341_set_baudrate_lcr(port->serial->dev, priv,
+					   priv->baud_rate, lcr);
+		if (r < 0 && old_termios) {
+			priv->baud_rate = tty_termios_baud_rate(old_termios);
+			tty_termios_copy_hw(&tty->termios, old_termios);
+		} else if (r == 0) {
+			priv->lcr = lcr;
+		}
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (C_BAUD(tty) == B0)
+		priv->mcr &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
+	else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+		priv->mcr |= (CH341_BIT_DTR | CH341_BIT_RTS);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	ch341_set_handshake(port->serial->dev, priv->mcr);
+}
+
+/*
+ * A subset of all CH34x devices don't support a real break condition and
+ * reading CH341_REG_BREAK fails (see also ch341_detect_quirks). This function
+ * simulates a break condition by lowering the baud rate to the minimum
+ * supported by the hardware upon enabling the break condition and sending
+ * a NUL byte.
+ *
+ * Incoming data is corrupted while the break condition is being simulated.
+ *
+ * Normally the duration of the break condition can be controlled individually
+ * by userspace using TIOCSBRK and TIOCCBRK or by passing an argument to
+ * TCSBRKP. Due to how the simulation is implemented the duration can't be
+ * controlled. The duration is always about (1s / 46bd * 9bit) = 196ms.
+ */
+static void ch341_simulate_break(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	unsigned long now, delay;
+	int r;
+
+	if (break_state != 0) {
+		dev_dbg(&port->dev, "enter break state requested\n");
+
+		r = ch341_set_baudrate_lcr(port->serial->dev, priv,
+				CH341_MIN_BPS,
+				CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX | CH341_LCR_CS8);
+		if (r < 0) {
+			dev_err(&port->dev,
+				"failed to change baud rate to %u: %d\n",
+				CH341_MIN_BPS, r);
+			goto restore;
+		}
+
+		r = tty_put_char(tty, '\0');
+		if (r < 0) {
+			dev_err(&port->dev,
+				"failed to write NUL byte for simulated break condition: %d\n",
+				r);
+			goto restore;
+		}
+
+		/*
+		 * Compute expected transmission duration including safety
+		 * margin. The original baud rate is only restored after the
+		 * computed point in time.
+		 *
+		 * 11 bits = 1 start, 8 data, 1 stop, 1 margin
+		 */
+		priv->break_end = jiffies + (11 * HZ / CH341_MIN_BPS);
+
+		return;
+	}
+
+	dev_dbg(&port->dev, "leave break state requested\n");
+
+	now = jiffies;
+
+	if (time_before(now, priv->break_end)) {
+		/* Wait until NUL byte is written */
+		delay = priv->break_end - now;
+		dev_dbg(&port->dev,
+			"wait %d ms while transmitting NUL byte at %u baud\n",
+			jiffies_to_msecs(delay), CH341_MIN_BPS);
+		schedule_timeout_interruptible(delay);
+	}
+
+restore:
+	/* Restore original baud rate */
+	r = ch341_set_baudrate_lcr(port->serial->dev, priv, priv->baud_rate,
+				   priv->lcr);
+	if (r < 0)
+		dev_err(&port->dev,
+			"restoring original baud rate of %u failed: %d\n",
+			priv->baud_rate, r);
+}
+
+static void ch341_break_ctl(struct tty_struct *tty, int break_state)
+{
+	const uint16_t ch341_break_reg =
+			((uint16_t) CH341_REG_LCR << 8) | CH341_REG_BREAK;
+	struct usb_serial_port *port = tty->driver_data;
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	int r;
+	uint16_t reg_contents;
+	uint8_t break_reg[2];
+
+	if (priv->quirks & CH341_QUIRK_SIMULATE_BREAK) {
+		ch341_simulate_break(tty, break_state);
+		return;
+	}
+
+	r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG,
+			ch341_break_reg, 0, break_reg, 2);
+	if (r) {
+		dev_err(&port->dev, "%s - USB control read error (%d)\n",
+				__func__, r);
+		return;
+	}
+	dev_dbg(&port->dev, "%s - initial ch341 break register contents - reg1: %x, reg2: %x\n",
+		__func__, break_reg[0], break_reg[1]);
+	if (break_state != 0) {
+		dev_dbg(&port->dev, "%s - Enter break state requested\n", __func__);
+		break_reg[0] &= ~CH341_NBREAK_BITS;
+		break_reg[1] &= ~CH341_LCR_ENABLE_TX;
+	} else {
+		dev_dbg(&port->dev, "%s - Leave break state requested\n", __func__);
+		break_reg[0] |= CH341_NBREAK_BITS;
+		break_reg[1] |= CH341_LCR_ENABLE_TX;
+	}
+	dev_dbg(&port->dev, "%s - New ch341 break register contents - reg1: %x, reg2: %x\n",
+		__func__, break_reg[0], break_reg[1]);
+	reg_contents = get_unaligned_le16(break_reg);
+	r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
+			ch341_break_reg, reg_contents);
+	if (r < 0)
+		dev_err(&port->dev, "%s - USB control write error (%d)\n",
+				__func__, r);
+}
+
+static int ch341_tiocmset(struct tty_struct *tty,
+			  unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (set & TIOCM_RTS)
+		priv->mcr |= CH341_BIT_RTS;
+	if (set & TIOCM_DTR)
+		priv->mcr |= CH341_BIT_DTR;
+	if (clear & TIOCM_RTS)
+		priv->mcr &= ~CH341_BIT_RTS;
+	if (clear & TIOCM_DTR)
+		priv->mcr &= ~CH341_BIT_DTR;
+	control = priv->mcr;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return ch341_set_handshake(port->serial->dev, control);
+}
+
+static void ch341_update_status(struct usb_serial_port *port,
+					unsigned char *data, size_t len)
+{
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	struct tty_struct *tty;
+	unsigned long flags;
+	u8 status;
+	u8 delta;
+
+	if (len < 4)
+		return;
+
+	status = ~data[2] & CH341_BITS_MODEM_STAT;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	delta = status ^ priv->msr;
+	priv->msr = status;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (data[1] & CH341_MULT_STAT)
+		dev_dbg(&port->dev, "%s - multiple status change\n", __func__);
+
+	if (!delta)
+		return;
+
+	if (delta & CH341_BIT_CTS)
+		port->icount.cts++;
+	if (delta & CH341_BIT_DSR)
+		port->icount.dsr++;
+	if (delta & CH341_BIT_RI)
+		port->icount.rng++;
+	if (delta & CH341_BIT_DCD) {
+		port->icount.dcd++;
+		tty = tty_port_tty_get(&port->port);
+		if (tty) {
+			usb_serial_handle_dcd_change(port, tty,
+						status & CH341_BIT_DCD);
+			tty_kref_put(tty);
+		}
+	}
+
+	wake_up_interruptible(&port->port.delta_msr_wait);
+}
+
+static void ch341_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	unsigned int len = urb->actual_length;
+	int status;
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&urb->dev->dev, "%s - urb shutting down: %d\n",
+			__func__, urb->status);
+		return;
+	default:
+		dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n",
+			__func__, urb->status);
+		goto exit;
+	}
+
+	usb_serial_debug_data(&port->dev, __func__, len, data);
+	ch341_update_status(port, data, len);
+exit:
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status) {
+		dev_err(&urb->dev->dev, "%s - usb_submit_urb failed: %d\n",
+			__func__, status);
+	}
+}
+
+static int ch341_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 mcr;
+	u8 status;
+	unsigned int result;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	mcr = priv->mcr;
+	status = priv->msr;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	result = ((mcr & CH341_BIT_DTR)		? TIOCM_DTR : 0)
+		  | ((mcr & CH341_BIT_RTS)	? TIOCM_RTS : 0)
+		  | ((status & CH341_BIT_CTS)	? TIOCM_CTS : 0)
+		  | ((status & CH341_BIT_DSR)	? TIOCM_DSR : 0)
+		  | ((status & CH341_BIT_RI)	? TIOCM_RI  : 0)
+		  | ((status & CH341_BIT_DCD)	? TIOCM_CD  : 0);
+
+	dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
+
+	return result;
+}
+
+static int ch341_reset_resume(struct usb_serial *serial)
+{
+	struct usb_serial_port *port = serial->port[0];
+	struct ch341_private *priv;
+	int ret;
+
+	priv = usb_get_serial_port_data(port);
+	if (!priv)
+		return 0;
+
+	/* reconfigure ch341 serial port after bus-reset */
+	ch341_configure(serial->dev, priv);
+
+	if (tty_port_initialized(&port->port)) {
+		ret = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
+		if (ret) {
+			dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
+				ret);
+			return ret;
+		}
+
+		ret = ch341_get_status(port->serial->dev, priv);
+		if (ret < 0) {
+			dev_err(&port->dev, "failed to read modem status: %d\n",
+				ret);
+		}
+	}
+
+	return usb_serial_generic_resume(serial);
+}
+
+static struct usb_serial_driver ch341_device = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "ch341-uart",
+	},
+	.id_table          = id_table,
+	.num_ports         = 1,
+	.open              = ch341_open,
+	.dtr_rts	   = ch341_dtr_rts,
+	.carrier_raised	   = ch341_carrier_raised,
+	.close             = ch341_close,
+	.set_termios       = ch341_set_termios,
+	.break_ctl         = ch341_break_ctl,
+	.tiocmget          = ch341_tiocmget,
+	.tiocmset          = ch341_tiocmset,
+	.tiocmiwait        = usb_serial_generic_tiocmiwait,
+	.read_int_callback = ch341_read_int_callback,
+	.port_probe        = ch341_port_probe,
+	.port_remove       = ch341_port_remove,
+	.reset_resume      = ch341_reset_resume,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ch341_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
new file mode 100644
index 000000000..da19a5fa4
--- /dev/null
+++ b/drivers/usb/serial/console.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Serial Console driver
+ *
+ * Copyright (C) 2001 - 2002 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * Thanks to Randy Dunlap for the original version of this code.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/serial.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+struct usbcons_info {
+	int			magic;
+	int			break_flag;
+	struct usb_serial_port	*port;
+};
+
+static struct usbcons_info usbcons_info;
+static struct console usbcons;
+
+/*
+ * ------------------------------------------------------------
+ * USB Serial console driver
+ *
+ * Much of the code here is copied from drivers/char/serial.c
+ * and implements a phony serial console in the same way that
+ * serial.c does so that in case some software queries it,
+ * it will get the same results.
+ *
+ * Things that are different from the way the serial port code
+ * does things, is that we call the lower level usb-serial
+ * driver code to initialize the device, and we set the initial
+ * console speeds based on the command line arguments.
+ * ------------------------------------------------------------
+ */
+
+static const struct tty_operations usb_console_fake_tty_ops = {
+};
+
+/*
+ * The parsing of the command line works exactly like the
+ * serial.c code, except that the specifier is "ttyUSB" instead
+ * of "ttyS".
+ */
+static int usb_console_setup(struct console *co, char *options)
+{
+	struct usbcons_info *info = &usbcons_info;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int doflow = 0;
+	int cflag = CREAD | HUPCL | CLOCAL;
+	char *s;
+	struct usb_serial *serial;
+	struct usb_serial_port *port;
+	int retval;
+	struct tty_struct *tty = NULL;
+	struct ktermios dummy;
+
+	if (options) {
+		baud = simple_strtoul(options, NULL, 10);
+		s = options;
+		while (*s >= '0' && *s <= '9')
+			s++;
+		if (*s)
+			parity = *s++;
+		if (*s)
+			bits   = *s++ - '0';
+		if (*s)
+			doflow = (*s++ == 'r');
+	}
+
+	/* Sane default */
+	if (baud == 0)
+		baud = 9600;
+
+	switch (bits) {
+	case 7:
+		cflag |= CS7;
+		break;
+	default:
+	case 8:
+		cflag |= CS8;
+		break;
+	}
+	switch (parity) {
+	case 'o': case 'O':
+		cflag |= PARODD;
+		break;
+	case 'e': case 'E':
+		cflag |= PARENB;
+		break;
+	}
+
+	if (doflow)
+		cflag |= CRTSCTS;
+
+	/*
+	 * no need to check the index here: if the index is wrong, console
+	 * code won't call us
+	 */
+	port = usb_serial_port_get_by_minor(co->index);
+	if (port == NULL) {
+		/* no device is connected yet, sorry :( */
+		pr_err("No USB device connected to ttyUSB%i\n", co->index);
+		return -ENODEV;
+	}
+	serial = port->serial;
+
+	retval = usb_autopm_get_interface(serial->interface);
+	if (retval)
+		goto error_get_interface;
+
+	tty_port_tty_set(&port->port, NULL);
+
+	info->port = port;
+
+	++port->port.count;
+	if (!tty_port_initialized(&port->port)) {
+		if (serial->type->set_termios) {
+			/*
+			 * allocate a fake tty so the driver can initialize
+			 * the termios structure, then later call set_termios to
+			 * configure according to command line arguments
+			 */
+			tty = kzalloc(sizeof(*tty), GFP_KERNEL);
+			if (!tty) {
+				retval = -ENOMEM;
+				goto reset_open_count;
+			}
+			kref_init(&tty->kref);
+			tty->driver = usb_serial_tty_driver;
+			tty->index = co->index;
+			init_ldsem(&tty->ldisc_sem);
+			spin_lock_init(&tty->files_lock);
+			INIT_LIST_HEAD(&tty->tty_files);
+			kref_get(&tty->driver->kref);
+			__module_get(tty->driver->owner);
+			tty->ops = &usb_console_fake_tty_ops;
+			tty_init_termios(tty);
+			tty_port_tty_set(&port->port, tty);
+		}
+
+		/* only call the device specific open if this
+		 * is the first time the port is opened */
+		retval = serial->type->open(NULL, port);
+		if (retval) {
+			dev_err(&port->dev, "could not open USB console port\n");
+			goto fail;
+		}
+
+		if (serial->type->set_termios) {
+			tty->termios.c_cflag = cflag;
+			tty_termios_encode_baud_rate(&tty->termios, baud, baud);
+			memset(&dummy, 0, sizeof(struct ktermios));
+			serial->type->set_termios(tty, port, &dummy);
+
+			tty_port_tty_set(&port->port, NULL);
+			tty_save_termios(tty);
+			tty_kref_put(tty);
+		}
+		tty_port_set_initialized(&port->port, 1);
+	}
+	/* Now that any required fake tty operations are completed restore
+	 * the tty port count */
+	--port->port.count;
+	/* The console is special in terms of closing the device so
+	 * indicate this port is now acting as a system console. */
+	port->port.console = 1;
+
+	mutex_unlock(&serial->disc_mutex);
+	return retval;
+
+ fail:
+	tty_port_tty_set(&port->port, NULL);
+	tty_kref_put(tty);
+ reset_open_count:
+	port->port.count = 0;
+	info->port = NULL;
+	usb_autopm_put_interface(serial->interface);
+ error_get_interface:
+	mutex_unlock(&serial->disc_mutex);
+	usb_serial_put(serial);
+	return retval;
+}
+
+static void usb_console_write(struct console *co,
+					const char *buf, unsigned count)
+{
+	static struct usbcons_info *info = &usbcons_info;
+	struct usb_serial_port *port = info->port;
+	struct usb_serial *serial;
+	int retval = -ENODEV;
+
+	if (!port || port->serial->dev->state == USB_STATE_NOTATTACHED)
+		return;
+	serial = port->serial;
+
+	if (count == 0)
+		return;
+
+	dev_dbg(&port->dev, "%s - %d byte(s)\n", __func__, count);
+
+	if (!port->port.console) {
+		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
+		return;
+	}
+
+	while (count) {
+		unsigned int i;
+		unsigned int lf;
+		/* search for LF so we can insert CR if necessary */
+		for (i = 0, lf = 0 ; i < count ; i++) {
+			if (*(buf + i) == 10) {
+				lf = 1;
+				i++;
+				break;
+			}
+		}
+		/* pass on to the driver specific version of this function if
+		   it is available */
+		retval = serial->type->write(NULL, port, buf, i);
+		dev_dbg(&port->dev, "%s - write: %d\n", __func__, retval);
+		if (lf) {
+			/* append CR after LF */
+			unsigned char cr = 13;
+			retval = serial->type->write(NULL, port, &cr, 1);
+			dev_dbg(&port->dev, "%s - write cr: %d\n",
+							__func__, retval);
+		}
+		buf += i;
+		count -= i;
+	}
+}
+
+static struct tty_driver *usb_console_device(struct console *co, int *index)
+{
+	struct tty_driver **p = (struct tty_driver **)co->data;
+
+	if (!*p)
+		return NULL;
+
+	*index = co->index;
+	return *p;
+}
+
+static struct console usbcons = {
+	.name =		"ttyUSB",
+	.write =	usb_console_write,
+	.device =	usb_console_device,
+	.setup =	usb_console_setup,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+	.data = 	&usb_serial_tty_driver,
+};
+
+void usb_serial_console_disconnect(struct usb_serial *serial)
+{
+	if (serial->port[0] && serial->port[0] == usbcons_info.port) {
+		usb_serial_console_exit();
+		usb_serial_put(serial);
+	}
+}
+
+void usb_serial_console_init(int minor)
+{
+	if (minor == 0) {
+		/*
+		 * Call register_console() if this is the first device plugged
+		 * in.  If we call it earlier, then the callback to
+		 * console_setup() will fail, as there is not a device seen by
+		 * the USB subsystem yet.
+		 */
+		/*
+		 * Register console.
+		 * NOTES:
+		 * console_setup() is called (back) immediately (from
+		 * register_console). console_write() is called immediately
+		 * from register_console iff CON_PRINTBUFFER is set in flags.
+		 */
+		pr_debug("registering the USB serial console.\n");
+		register_console(&usbcons);
+	}
+}
+
+void usb_serial_console_exit(void)
+{
+	if (usbcons_info.port) {
+		unregister_console(&usbcons);
+		usbcons_info.port->port.console = 0;
+		usbcons_info.port = NULL;
+	}
+}
+
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
new file mode 100644
index 000000000..f1d7a5a86
--- /dev/null
+++ b/drivers/usb/serial/cp210x.c
@@ -0,0 +1,2175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
+ *
+ * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
+ * Copyright (C) 2010-2021 Johan Hovold (johan@kernel.org)
+ *
+ * Support to set flow control line levels using TIOCMGET and TIOCMSET
+ * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
+ * control thanks to Munir Nassar nassarmu@real-time.com
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/gpio/driver.h>
+#include <linux/bitops.h>
+#include <linux/mutex.h>
+
+#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
+
+/*
+ * Function Prototypes
+ */
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
+static void cp210x_close(struct usb_serial_port *);
+static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
+				const struct ktermios *);
+static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
+			       const struct ktermios *);
+static bool cp210x_tx_empty(struct usb_serial_port *port);
+static int cp210x_tiocmget(struct tty_struct *);
+static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int);
+static int cp210x_tiocmset_port(struct usb_serial_port *port,
+		unsigned int, unsigned int);
+static void cp210x_break_ctl(struct tty_struct *, int);
+static int cp210x_attach(struct usb_serial *);
+static void cp210x_disconnect(struct usb_serial *);
+static void cp210x_release(struct usb_serial *);
+static int cp210x_port_probe(struct usb_serial_port *);
+static void cp210x_port_remove(struct usb_serial_port *);
+static void cp210x_dtr_rts(struct usb_serial_port *port, int on);
+static void cp210x_process_read_urb(struct urb *urb);
+static void cp210x_enable_event_mode(struct usb_serial_port *port);
+static void cp210x_disable_event_mode(struct usb_serial_port *port);
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x0404, 0x034C) },	/* NCR Retail IO Box */
+	{ USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */
+	{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
+	{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
+	{ USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
+	{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
+	{ USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
+	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
+	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
+	{ USB_DEVICE(0x0908, 0x0070) }, /* Siemens SCALANCE LPE-9000 USB Serial Console */
+	{ USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
+	{ USB_DEVICE(0x0988, 0x0578) }, /* Teraoka AD2000 */
+	{ USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */
+	{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
+	{ USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
+	{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
+	{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
+	{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
+	{ USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */
+	{ USB_DEVICE(0x106F, 0x0003) },	/* CPI / Money Controls Bulk Coin Recycler */
+	{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
+	{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
+	{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
+	{ USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
+	{ USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
+	{ USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
+	{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
+	{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
+	{ USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */
+	{ USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
+	{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
+	{ USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
+	{ USB_DEVICE(0x10C4, 0x8056) }, /* Lorenz Messtechnik devices */
+	{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
+	{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
+	{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+	{ USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
+	{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
+	{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
+	{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
+	{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
+	{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+	{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
+	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
+	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+	{ USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
+	{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
+	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+	{ USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
+	{ USB_DEVICE(0x10C4, 0x817C) }, /* CESINEL MEDCAL N Power Quality Monitor */
+	{ USB_DEVICE(0x10C4, 0x817D) }, /* CESINEL MEDCAL NT Power Quality Monitor */
+	{ USB_DEVICE(0x10C4, 0x817E) }, /* CESINEL MEDCAL S Power Quality Monitor */
+	{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
+	{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
+	{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
+	{ USB_DEVICE(0x10C4, 0x81A9) }, /* Multiplex RC Interface */
+	{ USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
+	{ USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
+	{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
+	{ USB_DEVICE(0x10C4, 0x81D7) }, /* IAI Corp. RCB-CV-USB USB to RS485 Adaptor */
+	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
+	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
+	{ USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
+	{ USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
+	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
+	{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
+	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
+	{ USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
+	{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
+	{ USB_DEVICE(0x10C4, 0x82AA) }, /* Silicon Labs IFS-USB-DATACABLE used with Quint UPS */
+	{ USB_DEVICE(0x10C4, 0x82EF) }, /* CESINEL FALCO 6105 AC Power Supply */
+	{ USB_DEVICE(0x10C4, 0x82F1) }, /* CESINEL MEDCAL EFD Earth Fault Detector */
+	{ USB_DEVICE(0x10C4, 0x82F2) }, /* CESINEL MEDCAL ST Network Analyzer */
+	{ USB_DEVICE(0x10C4, 0x82F4) }, /* Starizona MicroTouch */
+	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
+	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
+	{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
+	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+	{ USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */
+	{ USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
+	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
+	{ USB_DEVICE(0x10C4, 0x8414) }, /* Decagon USB Cable Adapter */
+	{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
+	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
+	{ USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */
+	{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
+	{ USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */
+	{ USB_DEVICE(0x10C4, 0x851E) }, /* CESINEL MEDCAL PT Network Analyzer */
+	{ USB_DEVICE(0x10C4, 0x85A7) }, /* LifeScan OneTouch Verio IQ */
+	{ USB_DEVICE(0x10C4, 0x85B8) }, /* CESINEL ReCon T Energy Logger */
+	{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
+	{ USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
+	{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
+	{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
+	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+	{ USB_DEVICE(0x10C4, 0x8856) },	/* CEL EM357 ZigBee USB Stick - LR */
+	{ USB_DEVICE(0x10C4, 0x8857) },	/* CEL EM357 ZigBee USB Stick */
+	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
+	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
+	{ USB_DEVICE(0x10C4, 0x88D8) }, /* Acuity Brands nLight Air Adapter */
+	{ USB_DEVICE(0x10C4, 0x88FB) }, /* CESINEL MEDCAL STII Network Analyzer */
+	{ USB_DEVICE(0x10C4, 0x8938) }, /* CESINEL MEDCAL S II Network Analyzer */
+	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
+	{ USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */
+	{ USB_DEVICE(0x10C4, 0x8977) },	/* CEL MeshWorks DevKit Device */
+	{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
+	{ USB_DEVICE(0x10C4, 0x89A4) }, /* CESINEL FTBC Flexible Thyristor Bridge Controller */
+	{ USB_DEVICE(0x10C4, 0x89FB) }, /* Qivicon ZigBee USB Radio Stick */
+	{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
+	{ USB_DEVICE(0x10C4, 0x8A5B) }, /* CEL EM3588 ZigBee USB Stick */
+	{ USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */
+	{ USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */
+	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
+	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+	{ USB_DEVICE(0x10C4, 0xEA63) }, /* Silicon Labs Windows Update (CP2101-4/CP2102N) */
+	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
+	{ USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
+	{ USB_DEVICE(0x10C4, 0xEA7A) }, /* Silicon Labs Windows Update (CP2105) */
+	{ USB_DEVICE(0x10C4, 0xEA7B) }, /* Silicon Labs Windows Update (CP2108) */
+	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
+	{ USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
+	{ USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
+	{ USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
+	{ USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
+	{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
+	{ USB_DEVICE(0x12B8, 0xEC60) }, /* Link G4 ECU */
+	{ USB_DEVICE(0x12B8, 0xEC62) }, /* Link G4+ ECU */
+	{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
+	{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
+	{ USB_DEVICE(0x155A, 0x1006) },	/* ELDAT Easywave RX09 */
+	{ USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
+	{ USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
+	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
+	{ USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
+	{ USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
+	{ USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
+	{ USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
+	{ USB_DEVICE(0x16C0, 0x09B0) }, /* Lunatico Seletek */
+	{ USB_DEVICE(0x16C0, 0x09B1) }, /* Lunatico Seletek */
+	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
+	{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
+	{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
+	{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
+	{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
+	{ USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
+	{ USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
+	{ USB_DEVICE(0x17A8, 0x0011) }, /* Kamstrup 444 MHz RF sniffer */
+	{ USB_DEVICE(0x17A8, 0x0013) }, /* Kamstrup 870 MHz RF sniffer */
+	{ USB_DEVICE(0x17A8, 0x0101) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Int Ant) */
+	{ USB_DEVICE(0x17A8, 0x0102) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Ext Ant) */
+	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
+	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
+	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+	{ USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
+	{ USB_DEVICE(0x18EF, 0xE030) }, /* ELV ALC 8xxx Battery Charger */
+	{ USB_DEVICE(0x18EF, 0xE032) }, /* ELV TFD500 Data Logger */
+	{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
+	{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
+	{ USB_DEVICE(0x1901, 0x0194) },	/* GE Healthcare Remote Alarm Box */
+	{ USB_DEVICE(0x1901, 0x0195) },	/* GE B850/B650/B450 CP2104 DP UART interface */
+	{ USB_DEVICE(0x1901, 0x0196) },	/* GE B850 CP2105 DP UART interface */
+	{ USB_DEVICE(0x1901, 0x0197) }, /* GE CS1000 M.2 Key E serial interface */
+	{ USB_DEVICE(0x1901, 0x0198) }, /* GE CS1000 Display serial interface */
+	{ USB_DEVICE(0x199B, 0xBA30) }, /* LORD WSDA-200-USB */
+	{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
+	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
+	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+	{ USB_DEVICE(0x1BA4, 0x0002) },	/* Silicon Labs 358x factory default */
+	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+	{ USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
+	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
+	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
+	{ USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
+	{ USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
+	{ USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
+	{ USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
+	{ USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
+	{ USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
+	{ USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
+	{ USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
+	{ USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
+	{ USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
+	{ USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
+	{ USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
+	{ USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
+	{ USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
+	{ USB_DEVICE(0x2184, 0x0030) }, /* GW Instek GDM-834x Digital Multimeter */
+	{ USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */
+	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
+	{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
+	{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
+	{ USB_DEVICE(0x3923, 0x7A0B) }, /* National Instruments USB Serial Console */
+	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
+	{ } /* Terminating Entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct cp210x_serial_private {
+#ifdef CONFIG_GPIOLIB
+	struct gpio_chip	gc;
+	bool			gpio_registered;
+	u16			gpio_pushpull;
+	u16			gpio_altfunc;
+	u16			gpio_input;
+#endif
+	u8			partnum;
+	u32			fw_version;
+	speed_t			min_speed;
+	speed_t			max_speed;
+	bool			use_actual_rate;
+	bool			no_flow_control;
+	bool			no_event_mode;
+};
+
+enum cp210x_event_state {
+	ES_DATA,
+	ES_ESCAPE,
+	ES_LSR,
+	ES_LSR_DATA_0,
+	ES_LSR_DATA_1,
+	ES_MSR
+};
+
+struct cp210x_port_private {
+	u8			bInterfaceNumber;
+	bool			event_mode;
+	enum cp210x_event_state event_state;
+	u8			lsr;
+
+	struct mutex		mutex;
+	bool			crtscts;
+	bool			dtr;
+	bool			rts;
+};
+
+static struct usb_serial_driver cp210x_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"cp210x",
+	},
+	.id_table		= id_table,
+	.num_ports		= 1,
+	.bulk_in_size		= 256,
+	.bulk_out_size		= 256,
+	.open			= cp210x_open,
+	.close			= cp210x_close,
+	.break_ctl		= cp210x_break_ctl,
+	.set_termios		= cp210x_set_termios,
+	.tx_empty		= cp210x_tx_empty,
+	.throttle		= usb_serial_generic_throttle,
+	.unthrottle		= usb_serial_generic_unthrottle,
+	.tiocmget		= cp210x_tiocmget,
+	.tiocmset		= cp210x_tiocmset,
+	.get_icount		= usb_serial_generic_get_icount,
+	.attach			= cp210x_attach,
+	.disconnect		= cp210x_disconnect,
+	.release		= cp210x_release,
+	.port_probe		= cp210x_port_probe,
+	.port_remove		= cp210x_port_remove,
+	.dtr_rts		= cp210x_dtr_rts,
+	.process_read_urb	= cp210x_process_read_urb,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&cp210x_device, NULL
+};
+
+/* Config request types */
+#define REQTYPE_HOST_TO_INTERFACE	0x41
+#define REQTYPE_INTERFACE_TO_HOST	0xc1
+#define REQTYPE_HOST_TO_DEVICE	0x40
+#define REQTYPE_DEVICE_TO_HOST	0xc0
+
+/* Config request codes */
+#define CP210X_IFC_ENABLE	0x00
+#define CP210X_SET_BAUDDIV	0x01
+#define CP210X_GET_BAUDDIV	0x02
+#define CP210X_SET_LINE_CTL	0x03
+#define CP210X_GET_LINE_CTL	0x04
+#define CP210X_SET_BREAK	0x05
+#define CP210X_IMM_CHAR		0x06
+#define CP210X_SET_MHS		0x07
+#define CP210X_GET_MDMSTS	0x08
+#define CP210X_SET_XON		0x09
+#define CP210X_SET_XOFF		0x0A
+#define CP210X_SET_EVENTMASK	0x0B
+#define CP210X_GET_EVENTMASK	0x0C
+#define CP210X_SET_CHAR		0x0D
+#define CP210X_GET_CHARS	0x0E
+#define CP210X_GET_PROPS	0x0F
+#define CP210X_GET_COMM_STATUS	0x10
+#define CP210X_RESET		0x11
+#define CP210X_PURGE		0x12
+#define CP210X_SET_FLOW		0x13
+#define CP210X_GET_FLOW		0x14
+#define CP210X_EMBED_EVENTS	0x15
+#define CP210X_GET_EVENTSTATE	0x16
+#define CP210X_SET_CHARS	0x19
+#define CP210X_GET_BAUDRATE	0x1D
+#define CP210X_SET_BAUDRATE	0x1E
+#define CP210X_VENDOR_SPECIFIC	0xFF
+
+/* CP210X_IFC_ENABLE */
+#define UART_ENABLE		0x0001
+#define UART_DISABLE		0x0000
+
+/* CP210X_(SET|GET)_BAUDDIV */
+#define BAUD_RATE_GEN_FREQ	0x384000
+
+/* CP210X_(SET|GET)_LINE_CTL */
+#define BITS_DATA_MASK		0X0f00
+#define BITS_DATA_5		0X0500
+#define BITS_DATA_6		0X0600
+#define BITS_DATA_7		0X0700
+#define BITS_DATA_8		0X0800
+#define BITS_DATA_9		0X0900
+
+#define BITS_PARITY_MASK	0x00f0
+#define BITS_PARITY_NONE	0x0000
+#define BITS_PARITY_ODD		0x0010
+#define BITS_PARITY_EVEN	0x0020
+#define BITS_PARITY_MARK	0x0030
+#define BITS_PARITY_SPACE	0x0040
+
+#define BITS_STOP_MASK		0x000f
+#define BITS_STOP_1		0x0000
+#define BITS_STOP_1_5		0x0001
+#define BITS_STOP_2		0x0002
+
+/* CP210X_SET_BREAK */
+#define BREAK_ON		0x0001
+#define BREAK_OFF		0x0000
+
+/* CP210X_(SET_MHS|GET_MDMSTS) */
+#define CONTROL_DTR		0x0001
+#define CONTROL_RTS		0x0002
+#define CONTROL_CTS		0x0010
+#define CONTROL_DSR		0x0020
+#define CONTROL_RING		0x0040
+#define CONTROL_DCD		0x0080
+#define CONTROL_WRITE_DTR	0x0100
+#define CONTROL_WRITE_RTS	0x0200
+
+/* CP210X_(GET|SET)_CHARS */
+struct cp210x_special_chars {
+	u8	bEofChar;
+	u8	bErrorChar;
+	u8	bBreakChar;
+	u8	bEventChar;
+	u8	bXonChar;
+	u8	bXoffChar;
+};
+
+/* CP210X_VENDOR_SPECIFIC values */
+#define CP210X_GET_FW_VER	0x000E
+#define CP210X_READ_2NCONFIG	0x000E
+#define CP210X_GET_FW_VER_2N	0x0010
+#define CP210X_READ_LATCH	0x00C2
+#define CP210X_GET_PARTNUM	0x370B
+#define CP210X_GET_PORTCONFIG	0x370C
+#define CP210X_GET_DEVICEMODE	0x3711
+#define CP210X_WRITE_LATCH	0x37E1
+
+/* Part number definitions */
+#define CP210X_PARTNUM_CP2101	0x01
+#define CP210X_PARTNUM_CP2102	0x02
+#define CP210X_PARTNUM_CP2103	0x03
+#define CP210X_PARTNUM_CP2104	0x04
+#define CP210X_PARTNUM_CP2105	0x05
+#define CP210X_PARTNUM_CP2108	0x08
+#define CP210X_PARTNUM_CP2102N_QFN28	0x20
+#define CP210X_PARTNUM_CP2102N_QFN24	0x21
+#define CP210X_PARTNUM_CP2102N_QFN20	0x22
+#define CP210X_PARTNUM_UNKNOWN	0xFF
+
+/* CP210X_GET_COMM_STATUS returns these 0x13 bytes */
+struct cp210x_comm_status {
+	__le32   ulErrors;
+	__le32   ulHoldReasons;
+	__le32   ulAmountInInQueue;
+	__le32   ulAmountInOutQueue;
+	u8       bEofReceived;
+	u8       bWaitForImmediate;
+	u8       bReserved;
+} __packed;
+
+/*
+ * CP210X_PURGE - 16 bits passed in wValue of USB request.
+ * SiLabs app note AN571 gives a strange description of the 4 bits:
+ * bit 0 or bit 2 clears the transmit queue and 1 or 3 receive.
+ * writing 1 to all, however, purges cp2108 well enough to avoid the hang.
+ */
+#define PURGE_ALL		0x000f
+
+/* CP210X_EMBED_EVENTS */
+#define CP210X_ESCCHAR		0xec
+
+#define CP210X_LSR_OVERRUN	BIT(1)
+#define CP210X_LSR_PARITY	BIT(2)
+#define CP210X_LSR_FRAME	BIT(3)
+#define CP210X_LSR_BREAK	BIT(4)
+
+
+/* CP210X_GET_FLOW/CP210X_SET_FLOW read/write these 0x10 bytes */
+struct cp210x_flow_ctl {
+	__le32	ulControlHandshake;
+	__le32	ulFlowReplace;
+	__le32	ulXonLimit;
+	__le32	ulXoffLimit;
+};
+
+/* cp210x_flow_ctl::ulControlHandshake */
+#define CP210X_SERIAL_DTR_MASK		GENMASK(1, 0)
+#define CP210X_SERIAL_DTR_INACTIVE	(0 << 0)
+#define CP210X_SERIAL_DTR_ACTIVE	(1 << 0)
+#define CP210X_SERIAL_DTR_FLOW_CTL	(2 << 0)
+#define CP210X_SERIAL_CTS_HANDSHAKE	BIT(3)
+#define CP210X_SERIAL_DSR_HANDSHAKE	BIT(4)
+#define CP210X_SERIAL_DCD_HANDSHAKE	BIT(5)
+#define CP210X_SERIAL_DSR_SENSITIVITY	BIT(6)
+
+/* cp210x_flow_ctl::ulFlowReplace */
+#define CP210X_SERIAL_AUTO_TRANSMIT	BIT(0)
+#define CP210X_SERIAL_AUTO_RECEIVE	BIT(1)
+#define CP210X_SERIAL_ERROR_CHAR	BIT(2)
+#define CP210X_SERIAL_NULL_STRIPPING	BIT(3)
+#define CP210X_SERIAL_BREAK_CHAR	BIT(4)
+#define CP210X_SERIAL_RTS_MASK		GENMASK(7, 6)
+#define CP210X_SERIAL_RTS_INACTIVE	(0 << 6)
+#define CP210X_SERIAL_RTS_ACTIVE	(1 << 6)
+#define CP210X_SERIAL_RTS_FLOW_CTL	(2 << 6)
+#define CP210X_SERIAL_XOFF_CONTINUE	BIT(31)
+
+/* CP210X_VENDOR_SPECIFIC, CP210X_GET_DEVICEMODE call reads these 0x2 bytes. */
+struct cp210x_pin_mode {
+	u8	eci;
+	u8	sci;
+};
+
+#define CP210X_PIN_MODE_MODEM		0
+#define CP210X_PIN_MODE_GPIO		BIT(0)
+
+/*
+ * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xf bytes
+ * on a CP2105 chip. Structure needs padding due to unused/unspecified bytes.
+ */
+struct cp210x_dual_port_config {
+	__le16	gpio_mode;
+	u8	__pad0[2];
+	__le16	reset_state;
+	u8	__pad1[4];
+	__le16	suspend_state;
+	u8	sci_cfg;
+	u8	eci_cfg;
+	u8	device_cfg;
+} __packed;
+
+/*
+ * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xd bytes
+ * on a CP2104 chip. Structure needs padding due to unused/unspecified bytes.
+ */
+struct cp210x_single_port_config {
+	__le16	gpio_mode;
+	u8	__pad0[2];
+	__le16	reset_state;
+	u8	__pad1[4];
+	__le16	suspend_state;
+	u8	device_cfg;
+} __packed;
+
+/* GPIO modes */
+#define CP210X_SCI_GPIO_MODE_OFFSET	9
+#define CP210X_SCI_GPIO_MODE_MASK	GENMASK(11, 9)
+
+#define CP210X_ECI_GPIO_MODE_OFFSET	2
+#define CP210X_ECI_GPIO_MODE_MASK	GENMASK(3, 2)
+
+#define CP210X_GPIO_MODE_OFFSET		8
+#define CP210X_GPIO_MODE_MASK		GENMASK(11, 8)
+
+/* CP2105 port configuration values */
+#define CP2105_GPIO0_TXLED_MODE		BIT(0)
+#define CP2105_GPIO1_RXLED_MODE		BIT(1)
+#define CP2105_GPIO1_RS485_MODE		BIT(2)
+
+/* CP2104 port configuration values */
+#define CP2104_GPIO0_TXLED_MODE		BIT(0)
+#define CP2104_GPIO1_RXLED_MODE		BIT(1)
+#define CP2104_GPIO2_RS485_MODE		BIT(2)
+
+struct cp210x_quad_port_state {
+	__le16 gpio_mode_pb0;
+	__le16 gpio_mode_pb1;
+	__le16 gpio_mode_pb2;
+	__le16 gpio_mode_pb3;
+	__le16 gpio_mode_pb4;
+
+	__le16 gpio_lowpower_pb0;
+	__le16 gpio_lowpower_pb1;
+	__le16 gpio_lowpower_pb2;
+	__le16 gpio_lowpower_pb3;
+	__le16 gpio_lowpower_pb4;
+
+	__le16 gpio_latch_pb0;
+	__le16 gpio_latch_pb1;
+	__le16 gpio_latch_pb2;
+	__le16 gpio_latch_pb3;
+	__le16 gpio_latch_pb4;
+};
+
+/*
+ * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0x49 bytes
+ * on a CP2108 chip.
+ *
+ * See https://www.silabs.com/documents/public/application-notes/an978-cp210x-usb-to-uart-api-specification.pdf
+ */
+struct cp210x_quad_port_config {
+	struct cp210x_quad_port_state reset_state;
+	struct cp210x_quad_port_state suspend_state;
+	u8 ipdelay_ifc[4];
+	u8 enhancedfxn_ifc[4];
+	u8 enhancedfxn_device;
+	u8 extclkfreq[4];
+} __packed;
+
+#define CP2108_EF_IFC_GPIO_TXLED		0x01
+#define CP2108_EF_IFC_GPIO_RXLED		0x02
+#define CP2108_EF_IFC_GPIO_RS485		0x04
+#define CP2108_EF_IFC_GPIO_RS485_LOGIC		0x08
+#define CP2108_EF_IFC_GPIO_CLOCK		0x10
+#define CP2108_EF_IFC_DYNAMIC_SUSPEND		0x40
+
+/* CP2102N configuration array indices */
+#define CP210X_2NCONFIG_CONFIG_VERSION_IDX	2
+#define CP210X_2NCONFIG_GPIO_MODE_IDX		581
+#define CP210X_2NCONFIG_GPIO_RSTLATCH_IDX	587
+#define CP210X_2NCONFIG_GPIO_CONTROL_IDX	600
+
+/* CP2102N QFN20 port configuration values */
+#define CP2102N_QFN20_GPIO2_TXLED_MODE		BIT(2)
+#define CP2102N_QFN20_GPIO3_RXLED_MODE		BIT(3)
+#define CP2102N_QFN20_GPIO1_RS485_MODE		BIT(4)
+#define CP2102N_QFN20_GPIO0_CLK_MODE		BIT(6)
+
+/*
+ * CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x02 bytes
+ * for CP2102N, CP2103, CP2104 and CP2105.
+ */
+struct cp210x_gpio_write {
+	u8	mask;
+	u8	state;
+};
+
+/*
+ * CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x04 bytes
+ * for CP2108.
+ */
+struct cp210x_gpio_write16 {
+	__le16	mask;
+	__le16	state;
+};
+
+/*
+ * Helper to get interface number when we only have struct usb_serial.
+ */
+static u8 cp210x_interface_num(struct usb_serial *serial)
+{
+	struct usb_host_interface *cur_altsetting;
+
+	cur_altsetting = serial->interface->cur_altsetting;
+
+	return cur_altsetting->desc.bInterfaceNumber;
+}
+
+/*
+ * Reads a variable-sized block of CP210X_ registers, identified by req.
+ * Returns data into buf in native USB byte order.
+ */
+static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
+		void *buf, int bufsize)
+{
+	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	int result;
+
+
+	result = usb_control_msg_recv(serial->dev, 0, req,
+			REQTYPE_INTERFACE_TO_HOST, 0,
+			port_priv->bInterfaceNumber, buf, bufsize,
+			USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
+	if (result) {
+		dev_err(&port->dev, "failed get req 0x%x size %d status: %d\n",
+				req, bufsize, result);
+		return result;
+	}
+
+	return 0;
+}
+
+/*
+ * Reads any 8-bit CP210X_ register identified by req.
+ */
+static int cp210x_read_u8_reg(struct usb_serial_port *port, u8 req, u8 *val)
+{
+	return cp210x_read_reg_block(port, req, val, sizeof(*val));
+}
+
+/*
+ * Reads a variable-sized vendor block of CP210X_ registers, identified by val.
+ * Returns data into buf in native USB byte order.
+ */
+static int cp210x_read_vendor_block(struct usb_serial *serial, u8 type, u16 val,
+				    void *buf, int bufsize)
+{
+	int result;
+
+	result = usb_control_msg_recv(serial->dev, 0, CP210X_VENDOR_SPECIFIC,
+			type, val, cp210x_interface_num(serial), buf, bufsize,
+			USB_CTRL_GET_TIMEOUT, GFP_KERNEL);
+	if (result) {
+		dev_err(&serial->interface->dev,
+			"failed to get vendor val 0x%04x size %d: %d\n", val,
+			bufsize, result);
+		return result;
+	}
+
+	return 0;
+}
+
+/*
+ * Writes any 16-bit CP210X_ register (req) whose value is passed
+ * entirely in the wValue field of the USB request.
+ */
+static int cp210x_write_u16_reg(struct usb_serial_port *port, u8 req, u16 val)
+{
+	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	int result;
+
+	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			req, REQTYPE_HOST_TO_INTERFACE, val,
+			port_priv->bInterfaceNumber, NULL, 0,
+			USB_CTRL_SET_TIMEOUT);
+	if (result < 0) {
+		dev_err(&port->dev, "failed set request 0x%x status: %d\n",
+				req, result);
+	}
+
+	return result;
+}
+
+/*
+ * Writes a variable-sized block of CP210X_ registers, identified by req.
+ * Data in buf must be in native USB byte order.
+ */
+static int cp210x_write_reg_block(struct usb_serial_port *port, u8 req,
+		void *buf, int bufsize)
+{
+	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	int result;
+
+	result = usb_control_msg_send(serial->dev, 0, req,
+			REQTYPE_HOST_TO_INTERFACE, 0,
+			port_priv->bInterfaceNumber, buf, bufsize,
+			USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
+	if (result) {
+		dev_err(&port->dev, "failed set req 0x%x size %d status: %d\n",
+				req, bufsize, result);
+		return result;
+	}
+
+	return 0;
+}
+
+/*
+ * Writes any 32-bit CP210X_ register identified by req.
+ */
+static int cp210x_write_u32_reg(struct usb_serial_port *port, u8 req, u32 val)
+{
+	__le32 le32_val;
+
+	le32_val = cpu_to_le32(val);
+
+	return cp210x_write_reg_block(port, req, &le32_val, sizeof(le32_val));
+}
+
+#ifdef CONFIG_GPIOLIB
+/*
+ * Writes a variable-sized vendor block of CP210X_ registers, identified by val.
+ * Data in buf must be in native USB byte order.
+ */
+static int cp210x_write_vendor_block(struct usb_serial *serial, u8 type,
+				     u16 val, void *buf, int bufsize)
+{
+	int result;
+
+	result = usb_control_msg_send(serial->dev, 0, CP210X_VENDOR_SPECIFIC,
+			type, val, cp210x_interface_num(serial), buf, bufsize,
+			USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
+	if (result) {
+		dev_err(&serial->interface->dev,
+			"failed to set vendor val 0x%04x size %d: %d\n", val,
+			bufsize, result);
+		return result;
+	}
+
+	return 0;
+}
+#endif
+
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	int result;
+
+	result = cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_ENABLE);
+	if (result) {
+		dev_err(&port->dev, "%s - Unable to enable UART\n", __func__);
+		return result;
+	}
+
+	if (tty)
+		cp210x_set_termios(tty, port, NULL);
+
+	result = usb_serial_generic_open(tty, port);
+	if (result)
+		goto err_disable;
+
+	return 0;
+
+err_disable:
+	cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE);
+	port_priv->event_mode = false;
+
+	return result;
+}
+
+static void cp210x_close(struct usb_serial_port *port)
+{
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+
+	usb_serial_generic_close(port);
+
+	/* Clear both queues; cp2108 needs this to avoid an occasional hang */
+	cp210x_write_u16_reg(port, CP210X_PURGE, PURGE_ALL);
+
+	cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE);
+
+	/* Disabling the interface disables event-insertion mode. */
+	port_priv->event_mode = false;
+}
+
+static void cp210x_process_lsr(struct usb_serial_port *port, unsigned char lsr, char *flag)
+{
+	if (lsr & CP210X_LSR_BREAK) {
+		port->icount.brk++;
+		*flag = TTY_BREAK;
+	} else if (lsr & CP210X_LSR_PARITY) {
+		port->icount.parity++;
+		*flag = TTY_PARITY;
+	} else if (lsr & CP210X_LSR_FRAME) {
+		port->icount.frame++;
+		*flag = TTY_FRAME;
+	}
+
+	if (lsr & CP210X_LSR_OVERRUN) {
+		port->icount.overrun++;
+		tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
+	}
+}
+
+static bool cp210x_process_char(struct usb_serial_port *port, unsigned char *ch, char *flag)
+{
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+
+	switch (port_priv->event_state) {
+	case ES_DATA:
+		if (*ch == CP210X_ESCCHAR) {
+			port_priv->event_state = ES_ESCAPE;
+			break;
+		}
+		return false;
+	case ES_ESCAPE:
+		switch (*ch) {
+		case 0:
+			dev_dbg(&port->dev, "%s - escape char\n", __func__);
+			*ch = CP210X_ESCCHAR;
+			port_priv->event_state = ES_DATA;
+			return false;
+		case 1:
+			port_priv->event_state = ES_LSR_DATA_0;
+			break;
+		case 2:
+			port_priv->event_state = ES_LSR;
+			break;
+		case 3:
+			port_priv->event_state = ES_MSR;
+			break;
+		default:
+			dev_err(&port->dev, "malformed event 0x%02x\n", *ch);
+			port_priv->event_state = ES_DATA;
+			break;
+		}
+		break;
+	case ES_LSR_DATA_0:
+		port_priv->lsr = *ch;
+		port_priv->event_state = ES_LSR_DATA_1;
+		break;
+	case ES_LSR_DATA_1:
+		dev_dbg(&port->dev, "%s - lsr = 0x%02x, data = 0x%02x\n",
+				__func__, port_priv->lsr, *ch);
+		cp210x_process_lsr(port, port_priv->lsr, flag);
+		port_priv->event_state = ES_DATA;
+		return false;
+	case ES_LSR:
+		dev_dbg(&port->dev, "%s - lsr = 0x%02x\n", __func__, *ch);
+		port_priv->lsr = *ch;
+		cp210x_process_lsr(port, port_priv->lsr, flag);
+		port_priv->event_state = ES_DATA;
+		break;
+	case ES_MSR:
+		dev_dbg(&port->dev, "%s - msr = 0x%02x\n", __func__, *ch);
+		/* unimplemented */
+		port_priv->event_state = ES_DATA;
+		break;
+	}
+
+	return true;
+}
+
+static void cp210x_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	unsigned char *ch = urb->transfer_buffer;
+	char flag;
+	int i;
+
+	if (!urb->actual_length)
+		return;
+
+	if (port_priv->event_mode) {
+		for (i = 0; i < urb->actual_length; i++, ch++) {
+			flag = TTY_NORMAL;
+
+			if (cp210x_process_char(port, ch, &flag))
+				continue;
+
+			tty_insert_flip_char(&port->port, *ch, flag);
+		}
+	} else {
+		tty_insert_flip_string(&port->port, ch, urb->actual_length);
+	}
+	tty_flip_buffer_push(&port->port);
+}
+
+/*
+ * Read how many bytes are waiting in the TX queue.
+ */
+static int cp210x_get_tx_queue_byte_count(struct usb_serial_port *port,
+		u32 *count)
+{
+	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	struct cp210x_comm_status sts;
+	int result;
+
+	result = usb_control_msg_recv(serial->dev, 0, CP210X_GET_COMM_STATUS,
+			REQTYPE_INTERFACE_TO_HOST, 0,
+			port_priv->bInterfaceNumber, &sts, sizeof(sts),
+			USB_CTRL_GET_TIMEOUT, GFP_KERNEL);
+	if (result) {
+		dev_err(&port->dev, "failed to get comm status: %d\n", result);
+		return result;
+	}
+
+	*count = le32_to_cpu(sts.ulAmountInOutQueue);
+
+	return 0;
+}
+
+static bool cp210x_tx_empty(struct usb_serial_port *port)
+{
+	int err;
+	u32 count;
+
+	err = cp210x_get_tx_queue_byte_count(port, &count);
+	if (err)
+		return true;
+
+	return !count;
+}
+
+struct cp210x_rate {
+	speed_t rate;
+	speed_t high;
+};
+
+static const struct cp210x_rate cp210x_an205_table1[] = {
+	{ 300, 300 },
+	{ 600, 600 },
+	{ 1200, 1200 },
+	{ 1800, 1800 },
+	{ 2400, 2400 },
+	{ 4000, 4000 },
+	{ 4800, 4803 },
+	{ 7200, 7207 },
+	{ 9600, 9612 },
+	{ 14400, 14428 },
+	{ 16000, 16062 },
+	{ 19200, 19250 },
+	{ 28800, 28912 },
+	{ 38400, 38601 },
+	{ 51200, 51558 },
+	{ 56000, 56280 },
+	{ 57600, 58053 },
+	{ 64000, 64111 },
+	{ 76800, 77608 },
+	{ 115200, 117028 },
+	{ 128000, 129347 },
+	{ 153600, 156868 },
+	{ 230400, 237832 },
+	{ 250000, 254234 },
+	{ 256000, 273066 },
+	{ 460800, 491520 },
+	{ 500000, 567138 },
+	{ 576000, 670254 },
+	{ 921600, UINT_MAX }
+};
+
+/*
+ * Quantises the baud rate as per AN205 Table 1
+ */
+static speed_t cp210x_get_an205_rate(speed_t baud)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cp210x_an205_table1); ++i) {
+		if (baud <= cp210x_an205_table1[i].high)
+			break;
+	}
+
+	return cp210x_an205_table1[i].rate;
+}
+
+static speed_t cp210x_get_actual_rate(speed_t baud)
+{
+	unsigned int prescale = 1;
+	unsigned int div;
+
+	if (baud <= 365)
+		prescale = 4;
+
+	div = DIV_ROUND_CLOSEST(48000000, 2 * prescale * baud);
+	baud = 48000000 / (2 * prescale * div);
+
+	return baud;
+}
+
+/*
+ * CP2101 supports the following baud rates:
+ *
+ *	300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800,
+ *	38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600
+ *
+ * CP2102 and CP2103 support the following additional rates:
+ *
+ *	4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000,
+ *	576000
+ *
+ * The device will map a requested rate to a supported one, but the result
+ * of requests for rates greater than 1053257 is undefined (see AN205).
+ *
+ * CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud,
+ * respectively, with an error less than 1%. The actual rates are determined
+ * by
+ *
+ *	div = round(freq / (2 x prescale x request))
+ *	actual = freq / (2 x prescale x div)
+ *
+ * For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps
+ * or 1 otherwise.
+ * For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1
+ * otherwise.
+ */
+static void cp210x_change_speed(struct tty_struct *tty,
+				struct usb_serial_port *port,
+				const struct ktermios *old_termios)
+{
+	struct usb_serial *serial = port->serial;
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	u32 baud;
+
+	/*
+	 * This maps the requested rate to the actual rate, a valid rate on
+	 * cp2102 or cp2103, or to an arbitrary rate in [1M, max_speed].
+	 *
+	 * NOTE: B0 is not implemented.
+	 */
+	baud = clamp(tty->termios.c_ospeed, priv->min_speed, priv->max_speed);
+
+	if (priv->use_actual_rate)
+		baud = cp210x_get_actual_rate(baud);
+	else if (baud < 1000000)
+		baud = cp210x_get_an205_rate(baud);
+
+	dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
+	if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) {
+		dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
+		if (old_termios)
+			baud = old_termios->c_ospeed;
+		else
+			baud = 9600;
+	}
+
+	tty_encode_baud_rate(tty, baud, baud);
+}
+
+static void cp210x_enable_event_mode(struct usb_serial_port *port)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(port->serial);
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	int ret;
+
+	if (port_priv->event_mode)
+		return;
+
+	if (priv->no_event_mode)
+		return;
+
+	port_priv->event_state = ES_DATA;
+	port_priv->event_mode = true;
+
+	ret = cp210x_write_u16_reg(port, CP210X_EMBED_EVENTS, CP210X_ESCCHAR);
+	if (ret) {
+		dev_err(&port->dev, "failed to enable events: %d\n", ret);
+		port_priv->event_mode = false;
+	}
+}
+
+static void cp210x_disable_event_mode(struct usb_serial_port *port)
+{
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	int ret;
+
+	if (!port_priv->event_mode)
+		return;
+
+	ret = cp210x_write_u16_reg(port, CP210X_EMBED_EVENTS, 0);
+	if (ret) {
+		dev_err(&port->dev, "failed to disable events: %d\n", ret);
+		return;
+	}
+
+	port_priv->event_mode = false;
+}
+
+static bool cp210x_termios_change(const struct ktermios *a, const struct ktermios *b)
+{
+	bool iflag_change, cc_change;
+
+	iflag_change = ((a->c_iflag ^ b->c_iflag) & (INPCK | IXON | IXOFF));
+	cc_change = a->c_cc[VSTART] != b->c_cc[VSTART] ||
+			a->c_cc[VSTOP] != b->c_cc[VSTOP];
+
+	return tty_termios_hw_change(a, b) || iflag_change || cc_change;
+}
+
+static void cp210x_set_flow_control(struct tty_struct *tty,
+				    struct usb_serial_port *port,
+				    const struct ktermios *old_termios)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(port->serial);
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	struct cp210x_special_chars chars;
+	struct cp210x_flow_ctl flow_ctl;
+	u32 flow_repl;
+	u32 ctl_hs;
+	bool crtscts;
+	int ret;
+
+	/*
+	 * Some CP2102N interpret ulXonLimit as ulFlowReplace (erratum
+	 * CP2102N_E104). Report back that flow control is not supported.
+	 */
+	if (priv->no_flow_control) {
+		tty->termios.c_cflag &= ~CRTSCTS;
+		tty->termios.c_iflag &= ~(IXON | IXOFF);
+	}
+
+	if (old_termios &&
+			C_CRTSCTS(tty) == (old_termios->c_cflag & CRTSCTS) &&
+			I_IXON(tty) == (old_termios->c_iflag & IXON) &&
+			I_IXOFF(tty) == (old_termios->c_iflag & IXOFF) &&
+			START_CHAR(tty) == old_termios->c_cc[VSTART] &&
+			STOP_CHAR(tty) == old_termios->c_cc[VSTOP]) {
+		return;
+	}
+
+	if (I_IXON(tty) || I_IXOFF(tty)) {
+		memset(&chars, 0, sizeof(chars));
+
+		chars.bXonChar = START_CHAR(tty);
+		chars.bXoffChar = STOP_CHAR(tty);
+
+		ret = cp210x_write_reg_block(port, CP210X_SET_CHARS, &chars,
+				sizeof(chars));
+		if (ret) {
+			dev_err(&port->dev, "failed to set special chars: %d\n",
+					ret);
+		}
+	}
+
+	mutex_lock(&port_priv->mutex);
+
+	ret = cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
+			sizeof(flow_ctl));
+	if (ret)
+		goto out_unlock;
+
+	ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
+	flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
+
+	ctl_hs &= ~CP210X_SERIAL_DSR_HANDSHAKE;
+	ctl_hs &= ~CP210X_SERIAL_DCD_HANDSHAKE;
+	ctl_hs &= ~CP210X_SERIAL_DSR_SENSITIVITY;
+	ctl_hs &= ~CP210X_SERIAL_DTR_MASK;
+	if (port_priv->dtr)
+		ctl_hs |= CP210X_SERIAL_DTR_ACTIVE;
+	else
+		ctl_hs |= CP210X_SERIAL_DTR_INACTIVE;
+
+	flow_repl &= ~CP210X_SERIAL_RTS_MASK;
+	if (C_CRTSCTS(tty)) {
+		ctl_hs |= CP210X_SERIAL_CTS_HANDSHAKE;
+		if (port_priv->rts)
+			flow_repl |= CP210X_SERIAL_RTS_FLOW_CTL;
+		else
+			flow_repl |= CP210X_SERIAL_RTS_INACTIVE;
+		crtscts = true;
+	} else {
+		ctl_hs &= ~CP210X_SERIAL_CTS_HANDSHAKE;
+		if (port_priv->rts)
+			flow_repl |= CP210X_SERIAL_RTS_ACTIVE;
+		else
+			flow_repl |= CP210X_SERIAL_RTS_INACTIVE;
+		crtscts = false;
+	}
+
+	if (I_IXOFF(tty)) {
+		flow_repl |= CP210X_SERIAL_AUTO_RECEIVE;
+
+		flow_ctl.ulXonLimit = cpu_to_le32(128);
+		flow_ctl.ulXoffLimit = cpu_to_le32(128);
+	} else {
+		flow_repl &= ~CP210X_SERIAL_AUTO_RECEIVE;
+	}
+
+	if (I_IXON(tty))
+		flow_repl |= CP210X_SERIAL_AUTO_TRANSMIT;
+	else
+		flow_repl &= ~CP210X_SERIAL_AUTO_TRANSMIT;
+
+	dev_dbg(&port->dev, "%s - ctrl = 0x%02x, flow = 0x%02x\n", __func__,
+			ctl_hs, flow_repl);
+
+	flow_ctl.ulControlHandshake = cpu_to_le32(ctl_hs);
+	flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
+
+	ret = cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl,
+			sizeof(flow_ctl));
+	if (ret)
+		goto out_unlock;
+
+	port_priv->crtscts = crtscts;
+out_unlock:
+	mutex_unlock(&port_priv->mutex);
+}
+
+static void cp210x_set_termios(struct tty_struct *tty,
+		               struct usb_serial_port *port,
+		               const struct ktermios *old_termios)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(port->serial);
+	u16 bits;
+	int ret;
+
+	if (old_termios && !cp210x_termios_change(&tty->termios, old_termios))
+		return;
+
+	if (!old_termios || tty->termios.c_ospeed != old_termios->c_ospeed)
+		cp210x_change_speed(tty, port, old_termios);
+
+	/* CP2101 only supports CS8, 1 stop bit and non-stick parity. */
+	if (priv->partnum == CP210X_PARTNUM_CP2101) {
+		tty->termios.c_cflag &= ~(CSIZE | CSTOPB | CMSPAR);
+		tty->termios.c_cflag |= CS8;
+	}
+
+	bits = 0;
+
+	switch (C_CSIZE(tty)) {
+	case CS5:
+		bits |= BITS_DATA_5;
+		break;
+	case CS6:
+		bits |= BITS_DATA_6;
+		break;
+	case CS7:
+		bits |= BITS_DATA_7;
+		break;
+	case CS8:
+	default:
+		bits |= BITS_DATA_8;
+		break;
+	}
+
+	if (C_PARENB(tty)) {
+		if (C_CMSPAR(tty)) {
+			if (C_PARODD(tty))
+				bits |= BITS_PARITY_MARK;
+			else
+				bits |= BITS_PARITY_SPACE;
+		} else {
+			if (C_PARODD(tty))
+				bits |= BITS_PARITY_ODD;
+			else
+				bits |= BITS_PARITY_EVEN;
+		}
+	}
+
+	if (C_CSTOPB(tty))
+		bits |= BITS_STOP_2;
+	else
+		bits |= BITS_STOP_1;
+
+	ret = cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
+	if (ret)
+		dev_err(&port->dev, "failed to set line control: %d\n", ret);
+
+	cp210x_set_flow_control(tty, port, old_termios);
+
+	/*
+	 * Enable event-insertion mode only if input parity checking is
+	 * enabled for now.
+	 */
+	if (I_INPCK(tty))
+		cp210x_enable_event_mode(port);
+	else
+		cp210x_disable_event_mode(port);
+}
+
+static int cp210x_tiocmset(struct tty_struct *tty,
+		unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	return cp210x_tiocmset_port(port, set, clear);
+}
+
+static int cp210x_tiocmset_port(struct usb_serial_port *port,
+		unsigned int set, unsigned int clear)
+{
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	struct cp210x_flow_ctl flow_ctl;
+	u32 ctl_hs, flow_repl;
+	u16 control = 0;
+	int ret;
+
+	mutex_lock(&port_priv->mutex);
+
+	if (set & TIOCM_RTS) {
+		port_priv->rts = true;
+		control |= CONTROL_RTS;
+		control |= CONTROL_WRITE_RTS;
+	}
+	if (set & TIOCM_DTR) {
+		port_priv->dtr = true;
+		control |= CONTROL_DTR;
+		control |= CONTROL_WRITE_DTR;
+	}
+	if (clear & TIOCM_RTS) {
+		port_priv->rts = false;
+		control &= ~CONTROL_RTS;
+		control |= CONTROL_WRITE_RTS;
+	}
+	if (clear & TIOCM_DTR) {
+		port_priv->dtr = false;
+		control &= ~CONTROL_DTR;
+		control |= CONTROL_WRITE_DTR;
+	}
+
+	/*
+	 * Use SET_FLOW to set DTR and enable/disable auto-RTS when hardware
+	 * flow control is enabled.
+	 */
+	if (port_priv->crtscts && control & CONTROL_WRITE_RTS) {
+		ret = cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
+				sizeof(flow_ctl));
+		if (ret)
+			goto out_unlock;
+
+		ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
+		flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
+
+		ctl_hs &= ~CP210X_SERIAL_DTR_MASK;
+		if (port_priv->dtr)
+			ctl_hs |= CP210X_SERIAL_DTR_ACTIVE;
+		else
+			ctl_hs |= CP210X_SERIAL_DTR_INACTIVE;
+
+		flow_repl &= ~CP210X_SERIAL_RTS_MASK;
+		if (port_priv->rts)
+			flow_repl |= CP210X_SERIAL_RTS_FLOW_CTL;
+		else
+			flow_repl |= CP210X_SERIAL_RTS_INACTIVE;
+
+		flow_ctl.ulControlHandshake = cpu_to_le32(ctl_hs);
+		flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
+
+		dev_dbg(&port->dev, "%s - ctrl = 0x%02x, flow = 0x%02x\n",
+				__func__, ctl_hs, flow_repl);
+
+		ret = cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl,
+				sizeof(flow_ctl));
+	} else {
+		dev_dbg(&port->dev, "%s - control = 0x%04x\n", __func__, control);
+
+		ret = cp210x_write_u16_reg(port, CP210X_SET_MHS, control);
+	}
+out_unlock:
+	mutex_unlock(&port_priv->mutex);
+
+	return ret;
+}
+
+static void cp210x_dtr_rts(struct usb_serial_port *port, int on)
+{
+	if (on)
+		cp210x_tiocmset_port(port, TIOCM_DTR | TIOCM_RTS, 0);
+	else
+		cp210x_tiocmset_port(port, 0, TIOCM_DTR | TIOCM_RTS);
+}
+
+static int cp210x_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	u8 control;
+	int result;
+
+	result = cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
+	if (result)
+		return result;
+
+	result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
+		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
+		|((control & CONTROL_CTS) ? TIOCM_CTS : 0)
+		|((control & CONTROL_DSR) ? TIOCM_DSR : 0)
+		|((control & CONTROL_RING)? TIOCM_RI  : 0)
+		|((control & CONTROL_DCD) ? TIOCM_CD  : 0);
+
+	dev_dbg(&port->dev, "%s - control = 0x%02x\n", __func__, control);
+
+	return result;
+}
+
+static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	u16 state;
+
+	if (break_state == 0)
+		state = BREAK_OFF;
+	else
+		state = BREAK_ON;
+	dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
+		state == BREAK_OFF ? "off" : "on");
+	cp210x_write_u16_reg(port, CP210X_SET_BREAK, state);
+}
+
+#ifdef CONFIG_GPIOLIB
+static int cp210x_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct usb_serial *serial = gpiochip_get_data(gc);
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	u8 req_type;
+	u16 mask;
+	int result;
+	int len;
+
+	result = usb_autopm_get_interface(serial->interface);
+	if (result)
+		return result;
+
+	switch (priv->partnum) {
+	case CP210X_PARTNUM_CP2105:
+		req_type = REQTYPE_INTERFACE_TO_HOST;
+		len = 1;
+		break;
+	case CP210X_PARTNUM_CP2108:
+		req_type = REQTYPE_INTERFACE_TO_HOST;
+		len = 2;
+		break;
+	default:
+		req_type = REQTYPE_DEVICE_TO_HOST;
+		len = 1;
+		break;
+	}
+
+	mask = 0;
+	result = cp210x_read_vendor_block(serial, req_type, CP210X_READ_LATCH,
+					  &mask, len);
+
+	usb_autopm_put_interface(serial->interface);
+
+	if (result < 0)
+		return result;
+
+	le16_to_cpus(&mask);
+
+	return !!(mask & BIT(gpio));
+}
+
+static void cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct usb_serial *serial = gpiochip_get_data(gc);
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	struct cp210x_gpio_write16 buf16;
+	struct cp210x_gpio_write buf;
+	u16 mask, state;
+	u16 wIndex;
+	int result;
+
+	if (value == 1)
+		state = BIT(gpio);
+	else
+		state = 0;
+
+	mask = BIT(gpio);
+
+	result = usb_autopm_get_interface(serial->interface);
+	if (result)
+		goto out;
+
+	switch (priv->partnum) {
+	case CP210X_PARTNUM_CP2105:
+		buf.mask = (u8)mask;
+		buf.state = (u8)state;
+		result = cp210x_write_vendor_block(serial,
+						   REQTYPE_HOST_TO_INTERFACE,
+						   CP210X_WRITE_LATCH, &buf,
+						   sizeof(buf));
+		break;
+	case CP210X_PARTNUM_CP2108:
+		buf16.mask = cpu_to_le16(mask);
+		buf16.state = cpu_to_le16(state);
+		result = cp210x_write_vendor_block(serial,
+						   REQTYPE_HOST_TO_INTERFACE,
+						   CP210X_WRITE_LATCH, &buf16,
+						   sizeof(buf16));
+		break;
+	default:
+		wIndex = state << 8 | mask;
+		result = usb_control_msg(serial->dev,
+					 usb_sndctrlpipe(serial->dev, 0),
+					 CP210X_VENDOR_SPECIFIC,
+					 REQTYPE_HOST_TO_DEVICE,
+					 CP210X_WRITE_LATCH,
+					 wIndex,
+					 NULL, 0, USB_CTRL_SET_TIMEOUT);
+		break;
+	}
+
+	usb_autopm_put_interface(serial->interface);
+out:
+	if (result < 0) {
+		dev_err(&serial->interface->dev, "failed to set GPIO value: %d\n",
+				result);
+	}
+}
+
+static int cp210x_gpio_direction_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct usb_serial *serial = gpiochip_get_data(gc);
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+
+	return priv->gpio_input & BIT(gpio);
+}
+
+static int cp210x_gpio_direction_input(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct usb_serial *serial = gpiochip_get_data(gc);
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+
+	if (priv->partnum == CP210X_PARTNUM_CP2105) {
+		/* hardware does not support an input mode */
+		return -ENOTSUPP;
+	}
+
+	/* push-pull pins cannot be changed to be inputs */
+	if (priv->gpio_pushpull & BIT(gpio))
+		return -EINVAL;
+
+	/* make sure to release pin if it is being driven low */
+	cp210x_gpio_set(gc, gpio, 1);
+
+	priv->gpio_input |= BIT(gpio);
+
+	return 0;
+}
+
+static int cp210x_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio,
+					int value)
+{
+	struct usb_serial *serial = gpiochip_get_data(gc);
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+
+	priv->gpio_input &= ~BIT(gpio);
+	cp210x_gpio_set(gc, gpio, value);
+
+	return 0;
+}
+
+static int cp210x_gpio_set_config(struct gpio_chip *gc, unsigned int gpio,
+				  unsigned long config)
+{
+	struct usb_serial *serial = gpiochip_get_data(gc);
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	enum pin_config_param param = pinconf_to_config_param(config);
+
+	/* Succeed only if in correct mode (this can't be set at runtime) */
+	if ((param == PIN_CONFIG_DRIVE_PUSH_PULL) &&
+	    (priv->gpio_pushpull & BIT(gpio)))
+		return 0;
+
+	if ((param == PIN_CONFIG_DRIVE_OPEN_DRAIN) &&
+	    !(priv->gpio_pushpull & BIT(gpio)))
+		return 0;
+
+	return -ENOTSUPP;
+}
+
+static int cp210x_gpio_init_valid_mask(struct gpio_chip *gc,
+		unsigned long *valid_mask, unsigned int ngpios)
+{
+	struct usb_serial *serial = gpiochip_get_data(gc);
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	struct device *dev = &serial->interface->dev;
+	unsigned long altfunc_mask = priv->gpio_altfunc;
+
+	bitmap_complement(valid_mask, &altfunc_mask, ngpios);
+
+	if (bitmap_empty(valid_mask, ngpios))
+		dev_dbg(dev, "no pin configured for GPIO\n");
+	else
+		dev_dbg(dev, "GPIO.%*pbl configured for GPIO\n", ngpios,
+				valid_mask);
+	return 0;
+}
+
+/*
+ * This function is for configuring GPIO using shared pins, where other signals
+ * are made unavailable by configuring the use of GPIO. This is believed to be
+ * only applicable to the cp2105 at this point, the other devices supported by
+ * this driver that provide GPIO do so in a way that does not impact other
+ * signals and are thus expected to have very different initialisation.
+ */
+static int cp2105_gpioconf_init(struct usb_serial *serial)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	struct cp210x_pin_mode mode;
+	struct cp210x_dual_port_config config;
+	u8 intf_num = cp210x_interface_num(serial);
+	u8 iface_config;
+	int result;
+
+	result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
+					  CP210X_GET_DEVICEMODE, &mode,
+					  sizeof(mode));
+	if (result < 0)
+		return result;
+
+	result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
+					  CP210X_GET_PORTCONFIG, &config,
+					  sizeof(config));
+	if (result < 0)
+		return result;
+
+	/*  2 banks of GPIO - One for the pins taken from each serial port */
+	if (intf_num == 0) {
+		priv->gc.ngpio = 2;
+
+		if (mode.eci == CP210X_PIN_MODE_MODEM) {
+			/* mark all GPIOs of this interface as reserved */
+			priv->gpio_altfunc = 0xff;
+			return 0;
+		}
+
+		iface_config = config.eci_cfg;
+		priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
+						CP210X_ECI_GPIO_MODE_MASK) >>
+						CP210X_ECI_GPIO_MODE_OFFSET);
+	} else if (intf_num == 1) {
+		priv->gc.ngpio = 3;
+
+		if (mode.sci == CP210X_PIN_MODE_MODEM) {
+			/* mark all GPIOs of this interface as reserved */
+			priv->gpio_altfunc = 0xff;
+			return 0;
+		}
+
+		iface_config = config.sci_cfg;
+		priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
+						CP210X_SCI_GPIO_MODE_MASK) >>
+						CP210X_SCI_GPIO_MODE_OFFSET);
+	} else {
+		return -ENODEV;
+	}
+
+	/* mark all pins which are not in GPIO mode */
+	if (iface_config & CP2105_GPIO0_TXLED_MODE)	/* GPIO 0 */
+		priv->gpio_altfunc |= BIT(0);
+	if (iface_config & (CP2105_GPIO1_RXLED_MODE |	/* GPIO 1 */
+			CP2105_GPIO1_RS485_MODE))
+		priv->gpio_altfunc |= BIT(1);
+
+	/* driver implementation for CP2105 only supports outputs */
+	priv->gpio_input = 0;
+
+	return 0;
+}
+
+static int cp2104_gpioconf_init(struct usb_serial *serial)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	struct cp210x_single_port_config config;
+	u8 iface_config;
+	u8 gpio_latch;
+	int result;
+	u8 i;
+
+	result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
+					  CP210X_GET_PORTCONFIG, &config,
+					  sizeof(config));
+	if (result < 0)
+		return result;
+
+	priv->gc.ngpio = 4;
+
+	iface_config = config.device_cfg;
+	priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
+					CP210X_GPIO_MODE_MASK) >>
+					CP210X_GPIO_MODE_OFFSET);
+	gpio_latch = (u8)((le16_to_cpu(config.reset_state) &
+					CP210X_GPIO_MODE_MASK) >>
+					CP210X_GPIO_MODE_OFFSET);
+
+	/* mark all pins which are not in GPIO mode */
+	if (iface_config & CP2104_GPIO0_TXLED_MODE)	/* GPIO 0 */
+		priv->gpio_altfunc |= BIT(0);
+	if (iface_config & CP2104_GPIO1_RXLED_MODE)	/* GPIO 1 */
+		priv->gpio_altfunc |= BIT(1);
+	if (iface_config & CP2104_GPIO2_RS485_MODE)	/* GPIO 2 */
+		priv->gpio_altfunc |= BIT(2);
+
+	/*
+	 * Like CP2102N, CP2104 has also no strict input and output pin
+	 * modes.
+	 * Do the same input mode emulation as CP2102N.
+	 */
+	for (i = 0; i < priv->gc.ngpio; ++i) {
+		/*
+		 * Set direction to "input" iff pin is open-drain and reset
+		 * value is 1.
+		 */
+		if (!(priv->gpio_pushpull & BIT(i)) && (gpio_latch & BIT(i)))
+			priv->gpio_input |= BIT(i);
+	}
+
+	return 0;
+}
+
+static int cp2108_gpio_init(struct usb_serial *serial)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	struct cp210x_quad_port_config config;
+	u16 gpio_latch;
+	int result;
+	u8 i;
+
+	result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
+					  CP210X_GET_PORTCONFIG, &config,
+					  sizeof(config));
+	if (result < 0)
+		return result;
+
+	priv->gc.ngpio = 16;
+	priv->gpio_pushpull = le16_to_cpu(config.reset_state.gpio_mode_pb1);
+	gpio_latch = le16_to_cpu(config.reset_state.gpio_latch_pb1);
+
+	/*
+	 * Mark all pins which are not in GPIO mode.
+	 *
+	 * Refer to table 9.1 "GPIO Mode alternate Functions" in the datasheet:
+	 * https://www.silabs.com/documents/public/data-sheets/cp2108-datasheet.pdf
+	 *
+	 * Alternate functions of GPIO0 to GPIO3 are determine by enhancedfxn_ifc[0]
+	 * and the similarly for the other pins; enhancedfxn_ifc[1]: GPIO4 to GPIO7,
+	 * enhancedfxn_ifc[2]: GPIO8 to GPIO11, enhancedfxn_ifc[3]: GPIO12 to GPIO15.
+	 */
+	for (i = 0; i < 4; i++) {
+		if (config.enhancedfxn_ifc[i] & CP2108_EF_IFC_GPIO_TXLED)
+			priv->gpio_altfunc |= BIT(i * 4);
+		if (config.enhancedfxn_ifc[i] & CP2108_EF_IFC_GPIO_RXLED)
+			priv->gpio_altfunc |= BIT((i * 4) + 1);
+		if (config.enhancedfxn_ifc[i] & CP2108_EF_IFC_GPIO_RS485)
+			priv->gpio_altfunc |= BIT((i * 4) + 2);
+		if (config.enhancedfxn_ifc[i] & CP2108_EF_IFC_GPIO_CLOCK)
+			priv->gpio_altfunc |= BIT((i * 4) + 3);
+	}
+
+	/*
+	 * Like CP2102N, CP2108 has also no strict input and output pin
+	 * modes. Do the same input mode emulation as CP2102N.
+	 */
+	for (i = 0; i < priv->gc.ngpio; ++i) {
+		/*
+		 * Set direction to "input" iff pin is open-drain and reset
+		 * value is 1.
+		 */
+		if (!(priv->gpio_pushpull & BIT(i)) && (gpio_latch & BIT(i)))
+			priv->gpio_input |= BIT(i);
+	}
+
+	return 0;
+}
+
+static int cp2102n_gpioconf_init(struct usb_serial *serial)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	const u16 config_size = 0x02a6;
+	u8 gpio_rst_latch;
+	u8 config_version;
+	u8 gpio_pushpull;
+	u8 *config_buf;
+	u8 gpio_latch;
+	u8 gpio_ctrl;
+	int result;
+	u8 i;
+
+	/*
+	 * Retrieve device configuration from the device.
+	 * The array received contains all customization settings done at the
+	 * factory/manufacturer. Format of the array is documented at the
+	 * time of writing at:
+	 * https://www.silabs.com/community/interface/knowledge-base.entry.html/2017/03/31/cp2102n_setconfig-xsfa
+	 */
+	config_buf = kmalloc(config_size, GFP_KERNEL);
+	if (!config_buf)
+		return -ENOMEM;
+
+	result = cp210x_read_vendor_block(serial,
+					  REQTYPE_DEVICE_TO_HOST,
+					  CP210X_READ_2NCONFIG,
+					  config_buf,
+					  config_size);
+	if (result < 0) {
+		kfree(config_buf);
+		return result;
+	}
+
+	config_version = config_buf[CP210X_2NCONFIG_CONFIG_VERSION_IDX];
+	gpio_pushpull = config_buf[CP210X_2NCONFIG_GPIO_MODE_IDX];
+	gpio_ctrl = config_buf[CP210X_2NCONFIG_GPIO_CONTROL_IDX];
+	gpio_rst_latch = config_buf[CP210X_2NCONFIG_GPIO_RSTLATCH_IDX];
+
+	kfree(config_buf);
+
+	/* Make sure this is a config format we understand. */
+	if (config_version != 0x01)
+		return -ENOTSUPP;
+
+	priv->gc.ngpio = 4;
+
+	/*
+	 * Get default pin states after reset. Needed so we can determine
+	 * the direction of an open-drain pin.
+	 */
+	gpio_latch = (gpio_rst_latch >> 3) & 0x0f;
+
+	/* 0 indicates open-drain mode, 1 is push-pull */
+	priv->gpio_pushpull = (gpio_pushpull >> 3) & 0x0f;
+
+	/* 0 indicates GPIO mode, 1 is alternate function */
+	if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN20) {
+		/* QFN20 is special... */
+		if (gpio_ctrl & CP2102N_QFN20_GPIO0_CLK_MODE)   /* GPIO 0 */
+			priv->gpio_altfunc |= BIT(0);
+		if (gpio_ctrl & CP2102N_QFN20_GPIO1_RS485_MODE) /* GPIO 1 */
+			priv->gpio_altfunc |= BIT(1);
+		if (gpio_ctrl & CP2102N_QFN20_GPIO2_TXLED_MODE) /* GPIO 2 */
+			priv->gpio_altfunc |= BIT(2);
+		if (gpio_ctrl & CP2102N_QFN20_GPIO3_RXLED_MODE) /* GPIO 3 */
+			priv->gpio_altfunc |= BIT(3);
+	} else {
+		priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f;
+	}
+
+	if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN28) {
+		/*
+		 * For the QFN28 package, GPIO4-6 are controlled by
+		 * the low three bits of the mode/latch fields.
+		 * Contrary to the document linked above, the bits for
+		 * the SUSPEND pins are elsewhere.  No alternate
+		 * function is available for these pins.
+		 */
+		priv->gc.ngpio = 7;
+		gpio_latch |= (gpio_rst_latch & 7) << 4;
+		priv->gpio_pushpull |= (gpio_pushpull & 7) << 4;
+	}
+
+	/*
+	 * The CP2102N does not strictly has input and output pin modes,
+	 * it only knows open-drain and push-pull modes which is set at
+	 * factory. An open-drain pin can function both as an
+	 * input or an output. We emulate input mode for open-drain pins
+	 * by making sure they are not driven low, and we do not allow
+	 * push-pull pins to be set as an input.
+	 */
+	for (i = 0; i < priv->gc.ngpio; ++i) {
+		/*
+		 * Set direction to "input" iff pin is open-drain and reset
+		 * value is 1.
+		 */
+		if (!(priv->gpio_pushpull & BIT(i)) && (gpio_latch & BIT(i)))
+			priv->gpio_input |= BIT(i);
+	}
+
+	return 0;
+}
+
+static int cp210x_gpio_init(struct usb_serial *serial)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	int result;
+
+	switch (priv->partnum) {
+	case CP210X_PARTNUM_CP2104:
+		result = cp2104_gpioconf_init(serial);
+		break;
+	case CP210X_PARTNUM_CP2105:
+		result = cp2105_gpioconf_init(serial);
+		break;
+	case CP210X_PARTNUM_CP2108:
+		/*
+		 * The GPIOs are not tied to any specific port so only register
+		 * once for interface 0.
+		 */
+		if (cp210x_interface_num(serial) != 0)
+			return 0;
+		result = cp2108_gpio_init(serial);
+		break;
+	case CP210X_PARTNUM_CP2102N_QFN28:
+	case CP210X_PARTNUM_CP2102N_QFN24:
+	case CP210X_PARTNUM_CP2102N_QFN20:
+		result = cp2102n_gpioconf_init(serial);
+		break;
+	default:
+		return 0;
+	}
+
+	if (result < 0)
+		return result;
+
+	priv->gc.label = "cp210x";
+	priv->gc.get_direction = cp210x_gpio_direction_get;
+	priv->gc.direction_input = cp210x_gpio_direction_input;
+	priv->gc.direction_output = cp210x_gpio_direction_output;
+	priv->gc.get = cp210x_gpio_get;
+	priv->gc.set = cp210x_gpio_set;
+	priv->gc.set_config = cp210x_gpio_set_config;
+	priv->gc.init_valid_mask = cp210x_gpio_init_valid_mask;
+	priv->gc.owner = THIS_MODULE;
+	priv->gc.parent = &serial->interface->dev;
+	priv->gc.base = -1;
+	priv->gc.can_sleep = true;
+
+	result = gpiochip_add_data(&priv->gc, serial);
+	if (!result)
+		priv->gpio_registered = true;
+
+	return result;
+}
+
+static void cp210x_gpio_remove(struct usb_serial *serial)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+
+	if (priv->gpio_registered) {
+		gpiochip_remove(&priv->gc);
+		priv->gpio_registered = false;
+	}
+}
+
+#else
+
+static int cp210x_gpio_init(struct usb_serial *serial)
+{
+	return 0;
+}
+
+static void cp210x_gpio_remove(struct usb_serial *serial)
+{
+	/* Nothing to do */
+}
+
+#endif
+
+static int cp210x_port_probe(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv;
+
+	port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
+	if (!port_priv)
+		return -ENOMEM;
+
+	port_priv->bInterfaceNumber = cp210x_interface_num(serial);
+	mutex_init(&port_priv->mutex);
+
+	usb_set_serial_port_data(port, port_priv);
+
+	return 0;
+}
+
+static void cp210x_port_remove(struct usb_serial_port *port)
+{
+	struct cp210x_port_private *port_priv;
+
+	port_priv = usb_get_serial_port_data(port);
+	kfree(port_priv);
+}
+
+static void cp210x_init_max_speed(struct usb_serial *serial)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	bool use_actual_rate = false;
+	speed_t min = 300;
+	speed_t max;
+
+	switch (priv->partnum) {
+	case CP210X_PARTNUM_CP2101:
+		max = 921600;
+		break;
+	case CP210X_PARTNUM_CP2102:
+	case CP210X_PARTNUM_CP2103:
+		max = 1000000;
+		break;
+	case CP210X_PARTNUM_CP2104:
+		use_actual_rate = true;
+		max = 2000000;
+		break;
+	case CP210X_PARTNUM_CP2108:
+		max = 2000000;
+		break;
+	case CP210X_PARTNUM_CP2105:
+		if (cp210x_interface_num(serial) == 0) {
+			use_actual_rate = true;
+			max = 2000000;	/* ECI */
+		} else {
+			min = 2400;
+			max = 921600;	/* SCI */
+		}
+		break;
+	case CP210X_PARTNUM_CP2102N_QFN28:
+	case CP210X_PARTNUM_CP2102N_QFN24:
+	case CP210X_PARTNUM_CP2102N_QFN20:
+		use_actual_rate = true;
+		max = 3000000;
+		break;
+	default:
+		max = 2000000;
+		break;
+	}
+
+	priv->min_speed = min;
+	priv->max_speed = max;
+	priv->use_actual_rate = use_actual_rate;
+}
+
+static void cp2102_determine_quirks(struct usb_serial *serial)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	u8 *buf;
+	int ret;
+
+	buf = kmalloc(2, GFP_KERNEL);
+	if (!buf)
+		return;
+	/*
+	 * Some (possibly counterfeit) CP2102 do not support event-insertion
+	 * mode and respond differently to malformed vendor requests.
+	 * Specifically, they return one instead of two bytes when sent a
+	 * two-byte part-number request.
+	 */
+	ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+			CP210X_VENDOR_SPECIFIC, REQTYPE_DEVICE_TO_HOST,
+			CP210X_GET_PARTNUM, 0, buf, 2, USB_CTRL_GET_TIMEOUT);
+	if (ret == 1) {
+		dev_dbg(&serial->interface->dev,
+				"device does not support event-insertion mode\n");
+		priv->no_event_mode = true;
+	}
+
+	kfree(buf);
+}
+
+static int cp210x_get_fw_version(struct usb_serial *serial, u16 value)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	u8 ver[3];
+	int ret;
+
+	ret = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST, value,
+			ver, sizeof(ver));
+	if (ret)
+		return ret;
+
+	dev_dbg(&serial->interface->dev, "%s - %d.%d.%d\n", __func__,
+			ver[0], ver[1], ver[2]);
+
+	priv->fw_version = ver[0] << 16 | ver[1] << 8 | ver[2];
+
+	return 0;
+}
+
+static void cp210x_determine_type(struct usb_serial *serial)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	int ret;
+
+	ret = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
+			CP210X_GET_PARTNUM, &priv->partnum,
+			sizeof(priv->partnum));
+	if (ret < 0) {
+		dev_warn(&serial->interface->dev,
+				"querying part number failed\n");
+		priv->partnum = CP210X_PARTNUM_UNKNOWN;
+		return;
+	}
+
+	dev_dbg(&serial->interface->dev, "partnum = 0x%02x\n", priv->partnum);
+
+	switch (priv->partnum) {
+	case CP210X_PARTNUM_CP2102:
+		cp2102_determine_quirks(serial);
+		break;
+	case CP210X_PARTNUM_CP2105:
+	case CP210X_PARTNUM_CP2108:
+		cp210x_get_fw_version(serial, CP210X_GET_FW_VER);
+		break;
+	case CP210X_PARTNUM_CP2102N_QFN28:
+	case CP210X_PARTNUM_CP2102N_QFN24:
+	case CP210X_PARTNUM_CP2102N_QFN20:
+		ret = cp210x_get_fw_version(serial, CP210X_GET_FW_VER_2N);
+		if (ret)
+			break;
+		if (priv->fw_version <= 0x10004)
+			priv->no_flow_control = true;
+		break;
+	default:
+		break;
+	}
+}
+
+static int cp210x_attach(struct usb_serial *serial)
+{
+	int result;
+	struct cp210x_serial_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	usb_set_serial_data(serial, priv);
+
+	cp210x_determine_type(serial);
+	cp210x_init_max_speed(serial);
+
+	result = cp210x_gpio_init(serial);
+	if (result < 0) {
+		dev_err(&serial->interface->dev, "GPIO initialisation failed: %d\n",
+				result);
+	}
+
+	return 0;
+}
+
+static void cp210x_disconnect(struct usb_serial *serial)
+{
+	cp210x_gpio_remove(serial);
+}
+
+static void cp210x_release(struct usb_serial *serial)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+
+	cp210x_gpio_remove(serial);
+
+	kfree(priv);
+}
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
new file mode 100644
index 000000000..51e5aac3b
--- /dev/null
+++ b/drivers/usb/serial/cyberjack.c
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
+ *
+ *  Copyright (C) 2001  REINER SCT
+ *  Author: Matthias Bruestle
+ *
+ *  Contact: support@reiner-sct.com (see MAINTAINERS)
+ *
+ *  This program is largely derived from work by the linux-usb group
+ *  and associated source files.  Please see the usb/serial files for
+ *  individual credits and copyrights.
+ *
+ *  Thanks to Greg Kroah-Hartman (greg@kroah.com) for his help and
+ *  patience.
+ *
+ *  In case of problems, please write to the contact e-mail address
+ *  mentioned above.
+ *
+ *  Please note that later models of the cyberjack reader family are
+ *  supported by a libusb-based userspace device driver.
+ *
+ *  Homepage: http://www.reiner-sct.de/support/treiber_cyberjack.php#linux
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define CYBERJACK_LOCAL_BUF_SIZE 32
+
+#define DRIVER_AUTHOR "Matthias Bruestle"
+#define DRIVER_DESC "REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver"
+
+
+#define CYBERJACK_VENDOR_ID	0x0C4B
+#define CYBERJACK_PRODUCT_ID	0x0100
+
+/* Function prototypes */
+static int cyberjack_port_probe(struct usb_serial_port *port);
+static void cyberjack_port_remove(struct usb_serial_port *port);
+static int  cyberjack_open(struct tty_struct *tty,
+	struct usb_serial_port *port);
+static void cyberjack_close(struct usb_serial_port *port);
+static int cyberjack_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count);
+static unsigned int cyberjack_write_room(struct tty_struct *tty);
+static void cyberjack_read_int_callback(struct urb *urb);
+static void cyberjack_read_bulk_callback(struct urb *urb);
+static void cyberjack_write_bulk_callback(struct urb *urb);
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) },
+	{ }			/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_serial_driver cyberjack_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"cyberjack",
+	},
+	.description =		"Reiner SCT Cyberjack USB card reader",
+	.id_table =		id_table,
+	.num_ports =		1,
+	.num_bulk_out =		1,
+	.port_probe =		cyberjack_port_probe,
+	.port_remove =		cyberjack_port_remove,
+	.open =			cyberjack_open,
+	.close =		cyberjack_close,
+	.write =		cyberjack_write,
+	.write_room =		cyberjack_write_room,
+	.read_int_callback =	cyberjack_read_int_callback,
+	.read_bulk_callback =	cyberjack_read_bulk_callback,
+	.write_bulk_callback =	cyberjack_write_bulk_callback,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&cyberjack_device, NULL
+};
+
+struct cyberjack_private {
+	spinlock_t	lock;		/* Lock for SMP */
+	short		rdtodo;		/* Bytes still to read */
+	unsigned char	wrbuf[5*64];	/* Buffer for collecting data to write */
+	short		wrfilled;	/* Overall data size we already got */
+	short		wrsent;		/* Data already sent */
+};
+
+static int cyberjack_port_probe(struct usb_serial_port *port)
+{
+	struct cyberjack_private *priv;
+	int result;
+
+	priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+	priv->rdtodo = 0;
+	priv->wrfilled = 0;
+	priv->wrsent = 0;
+
+	usb_set_serial_port_data(port, priv);
+
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (result)
+		dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
+
+	return 0;
+}
+
+static void cyberjack_port_remove(struct usb_serial_port *port)
+{
+	struct cyberjack_private *priv;
+
+	usb_kill_urb(port->interrupt_in_urb);
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+}
+
+static int  cyberjack_open(struct tty_struct *tty,
+					struct usb_serial_port *port)
+{
+	struct cyberjack_private *priv;
+	unsigned long flags;
+
+	dev_dbg(&port->dev, "%s - usb_clear_halt\n", __func__);
+	usb_clear_halt(port->serial->dev, port->write_urb->pipe);
+
+	priv = usb_get_serial_port_data(port);
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->rdtodo = 0;
+	priv->wrfilled = 0;
+	priv->wrsent = 0;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static void cyberjack_close(struct usb_serial_port *port)
+{
+	usb_kill_urb(port->write_urb);
+	usb_kill_urb(port->read_urb);
+}
+
+static int cyberjack_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count)
+{
+	struct device *dev = &port->dev;
+	struct cyberjack_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	int result;
+	int wrexpected;
+
+	if (count == 0) {
+		dev_dbg(dev, "%s - write request of 0 bytes\n", __func__);
+		return 0;
+	}
+
+	if (!test_and_clear_bit(0, &port->write_urbs_free)) {
+		dev_dbg(dev, "%s - already writing\n", __func__);
+		return 0;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	if (count+priv->wrfilled > sizeof(priv->wrbuf)) {
+		/* To much data for buffer. Reset buffer. */
+		priv->wrfilled = 0;
+		spin_unlock_irqrestore(&priv->lock, flags);
+		set_bit(0, &port->write_urbs_free);
+		return 0;
+	}
+
+	/* Copy data */
+	memcpy(priv->wrbuf + priv->wrfilled, buf, count);
+
+	usb_serial_debug_data(dev, __func__, count, priv->wrbuf + priv->wrfilled);
+	priv->wrfilled += count;
+
+	if (priv->wrfilled >= 3) {
+		wrexpected = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3;
+		dev_dbg(dev, "%s - expected data: %d\n", __func__, wrexpected);
+	} else
+		wrexpected = sizeof(priv->wrbuf);
+
+	if (priv->wrfilled >= wrexpected) {
+		/* We have enough data to begin transmission */
+		int length;
+
+		dev_dbg(dev, "%s - transmitting data (frame 1)\n", __func__);
+		length = (wrexpected > port->bulk_out_size) ?
+					port->bulk_out_size : wrexpected;
+
+		memcpy(port->write_urb->transfer_buffer, priv->wrbuf, length);
+		priv->wrsent = length;
+
+		/* set up our urb */
+		port->write_urb->transfer_buffer_length = length;
+
+		/* send the data out the bulk port */
+		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+		if (result) {
+			dev_err(&port->dev,
+				"%s - failed submitting write urb, error %d\n",
+				__func__, result);
+			/* Throw away data. No better idea what to do with it. */
+			priv->wrfilled = 0;
+			priv->wrsent = 0;
+			spin_unlock_irqrestore(&priv->lock, flags);
+			set_bit(0, &port->write_urbs_free);
+			return 0;
+		}
+
+		dev_dbg(dev, "%s - priv->wrsent=%d\n", __func__, priv->wrsent);
+		dev_dbg(dev, "%s - priv->wrfilled=%d\n", __func__, priv->wrfilled);
+
+		if (priv->wrsent >= priv->wrfilled) {
+			dev_dbg(dev, "%s - buffer cleaned\n", __func__);
+			memset(priv->wrbuf, 0, sizeof(priv->wrbuf));
+			priv->wrfilled = 0;
+			priv->wrsent = 0;
+		}
+	}
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return count;
+}
+
+static unsigned int cyberjack_write_room(struct tty_struct *tty)
+{
+	/* FIXME: .... */
+	return CYBERJACK_LOCAL_BUF_SIZE;
+}
+
+static void cyberjack_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct cyberjack_private *priv = usb_get_serial_port_data(port);
+	struct device *dev = &port->dev;
+	unsigned char *data = urb->transfer_buffer;
+	int status = urb->status;
+	unsigned long flags;
+	int result;
+
+	/* the urb might have been killed. */
+	if (status)
+		return;
+
+	usb_serial_debug_data(dev, __func__, urb->actual_length, data);
+
+	/* React only to interrupts signaling a bulk_in transfer */
+	if (urb->actual_length == 4 && data[0] == 0x01) {
+		short old_rdtodo;
+
+		/* This is a announcement of coming bulk_ins. */
+		unsigned short size = ((unsigned short)data[3]<<8)+data[2]+3;
+
+		spin_lock_irqsave(&priv->lock, flags);
+
+		old_rdtodo = priv->rdtodo;
+
+		if (old_rdtodo > SHRT_MAX - size) {
+			dev_dbg(dev, "Too many bulk_in urbs to do.\n");
+			spin_unlock_irqrestore(&priv->lock, flags);
+			goto resubmit;
+		}
+
+		/* "+=" is probably more fault tolerant than "=" */
+		priv->rdtodo += size;
+
+		dev_dbg(dev, "%s - rdtodo: %d\n", __func__, priv->rdtodo);
+
+		spin_unlock_irqrestore(&priv->lock, flags);
+
+		if (!old_rdtodo) {
+			result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+			if (result)
+				dev_err(dev, "%s - failed resubmitting read urb, error %d\n",
+					__func__, result);
+			dev_dbg(dev, "%s - usb_submit_urb(read urb)\n", __func__);
+		}
+	}
+
+resubmit:
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+	if (result)
+		dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
+	dev_dbg(dev, "%s - usb_submit_urb(int urb)\n", __func__);
+}
+
+static void cyberjack_read_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct cyberjack_private *priv = usb_get_serial_port_data(port);
+	struct device *dev = &port->dev;
+	unsigned char *data = urb->transfer_buffer;
+	unsigned long flags;
+	short todo;
+	int result;
+	int status = urb->status;
+
+	usb_serial_debug_data(dev, __func__, urb->actual_length, data);
+	if (status) {
+		dev_dbg(dev, "%s - nonzero read bulk status received: %d\n",
+			__func__, status);
+		return;
+	}
+
+	if (urb->actual_length) {
+		tty_insert_flip_string(&port->port, data, urb->actual_length);
+		tty_flip_buffer_push(&port->port);
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/* Reduce urbs to do by one. */
+	priv->rdtodo -= urb->actual_length;
+	/* Just to be sure */
+	if (priv->rdtodo < 0)
+		priv->rdtodo = 0;
+	todo = priv->rdtodo;
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	dev_dbg(dev, "%s - rdtodo: %d\n", __func__, todo);
+
+	/* Continue to read if we have still urbs to do. */
+	if (todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/) {
+		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+		if (result)
+			dev_err(dev, "%s - failed resubmitting read urb, error %d\n",
+				__func__, result);
+		dev_dbg(dev, "%s - usb_submit_urb(read urb)\n", __func__);
+	}
+}
+
+static void cyberjack_write_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct cyberjack_private *priv = usb_get_serial_port_data(port);
+	struct device *dev = &port->dev;
+	int status = urb->status;
+	unsigned long flags;
+	bool resubmitted = false;
+
+	if (status) {
+		dev_dbg(dev, "%s - nonzero write bulk status received: %d\n",
+			__func__, status);
+		set_bit(0, &port->write_urbs_free);
+		return;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/* only do something if we have more data to send */
+	if (priv->wrfilled) {
+		int length, blksize, result;
+
+		dev_dbg(dev, "%s - transmitting data (frame n)\n", __func__);
+
+		length = ((priv->wrfilled - priv->wrsent) > port->bulk_out_size) ?
+			port->bulk_out_size : (priv->wrfilled - priv->wrsent);
+
+		memcpy(port->write_urb->transfer_buffer,
+					priv->wrbuf + priv->wrsent, length);
+		priv->wrsent += length;
+
+		/* set up our urb */
+		port->write_urb->transfer_buffer_length = length;
+
+		/* send the data out the bulk port */
+		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+		if (result) {
+			dev_err(dev, "%s - failed submitting write urb, error %d\n",
+				__func__, result);
+			/* Throw away data. No better idea what to do with it. */
+			priv->wrfilled = 0;
+			priv->wrsent = 0;
+			goto exit;
+		}
+
+		resubmitted = true;
+
+		dev_dbg(dev, "%s - priv->wrsent=%d\n", __func__, priv->wrsent);
+		dev_dbg(dev, "%s - priv->wrfilled=%d\n", __func__, priv->wrfilled);
+
+		blksize = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3;
+
+		if (priv->wrsent >= priv->wrfilled ||
+					priv->wrsent >= blksize) {
+			dev_dbg(dev, "%s - buffer cleaned\n", __func__);
+			memset(priv->wrbuf, 0, sizeof(priv->wrbuf));
+			priv->wrfilled = 0;
+			priv->wrsent = 0;
+		}
+	}
+
+exit:
+	spin_unlock_irqrestore(&priv->lock, flags);
+	if (!resubmitted)
+		set_bit(0, &port->write_urbs_free);
+	usb_serial_port_softint(port);
+}
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
new file mode 100644
index 000000000..1e0c028c5
--- /dev/null
+++ b/drivers/usb/serial/cypress_m8.c
@@ -0,0 +1,1209 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * USB Cypress M8 driver
+ *
+ * 	Copyright (C) 2004
+ * 	    Lonnie Mendez (dignome@gmail.com)
+ *	Copyright (C) 2003,2004
+ *	    Neil Whelchel (koyama@firstlight.net)
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ *
+ * See http://geocities.com/i0xox0i for information on this driver and the
+ * earthmate usb device.
+ */
+
+/* Thanks to Neil Whelchel for writing the first cypress m8 implementation
+   for linux. */
+/* Thanks to cypress for providing references for the hid reports. */
+/* Thanks to Jiang Zhang for providing links and for general help. */
+/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/
+
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial.h>
+#include <linux/kfifo.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <asm/unaligned.h>
+
+#include "cypress_m8.h"
+
+
+static bool stats;
+static int interval;
+static bool unstable_bauds;
+
+#define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
+#define DRIVER_DESC "Cypress USB to Serial Driver"
+
+/* write buffer size defines */
+#define CYPRESS_BUF_SIZE	1024
+
+static const struct usb_device_id id_table_earthmate[] = {
+	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
+	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
+	{ }						/* Terminating entry */
+};
+
+static const struct usb_device_id id_table_cyphidcomrs232[] = {
+	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
+	{ USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) },
+	{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+	{ USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
+	{ }						/* Terminating entry */
+};
+
+static const struct usb_device_id id_table_nokiaca42v2[] = {
+	{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
+	{ }						/* Terminating entry */
+};
+
+static const struct usb_device_id id_table_combined[] = {
+	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
+	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
+	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
+	{ USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) },
+	{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+	{ USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
+	{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table_combined);
+
+enum packet_format {
+	packet_format_1,  /* b0:status, b1:payload count */
+	packet_format_2   /* b0[7:3]:status, b0[2:0]:payload count */
+};
+
+struct cypress_private {
+	spinlock_t lock;		   /* private lock */
+	int chiptype;			   /* identifier of device, for quirks/etc */
+	int bytes_in;			   /* used for statistics */
+	int bytes_out;			   /* used for statistics */
+	int cmd_count;			   /* used for statistics */
+	int cmd_ctrl;			   /* always set this to 1 before issuing a command */
+	struct kfifo write_fifo;	   /* write fifo */
+	int write_urb_in_use;		   /* write urb in use indicator */
+	int write_urb_interval;            /* interval to use for write urb */
+	int read_urb_interval;             /* interval to use for read urb */
+	int comm_is_ok;                    /* true if communication is (still) ok */
+	__u8 line_control;	   	   /* holds dtr / rts value */
+	__u8 current_status;	   	   /* received from last read - info on dsr,cts,cd,ri,etc */
+	__u8 current_config;	   	   /* stores the current configuration byte */
+	__u8 rx_flags;			   /* throttling - used from whiteheat/ftdi_sio */
+	enum packet_format pkt_fmt;	   /* format to use for packet send / receive */
+	int get_cfg_unsafe;		   /* If true, the CYPRESS_GET_CONFIG is unsafe */
+	int baud_rate;			   /* stores current baud rate in
+					      integer form */
+	char prev_status;		   /* used for TIOCMIWAIT */
+};
+
+/* function prototypes for the Cypress USB to serial device */
+static int  cypress_earthmate_port_probe(struct usb_serial_port *port);
+static int  cypress_hidcom_port_probe(struct usb_serial_port *port);
+static int  cypress_ca42v2_port_probe(struct usb_serial_port *port);
+static void cypress_port_remove(struct usb_serial_port *port);
+static int  cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
+static void cypress_close(struct usb_serial_port *port);
+static void cypress_dtr_rts(struct usb_serial_port *port, int on);
+static int  cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *buf, int count);
+static void cypress_send(struct usb_serial_port *port);
+static unsigned int cypress_write_room(struct tty_struct *tty);
+static void cypress_earthmate_init_termios(struct tty_struct *tty);
+static void cypress_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
+				const struct ktermios *old_termios);
+static int  cypress_tiocmget(struct tty_struct *tty);
+static int  cypress_tiocmset(struct tty_struct *tty,
+			unsigned int set, unsigned int clear);
+static unsigned int cypress_chars_in_buffer(struct tty_struct *tty);
+static void cypress_throttle(struct tty_struct *tty);
+static void cypress_unthrottle(struct tty_struct *tty);
+static void cypress_set_dead(struct usb_serial_port *port);
+static void cypress_read_int_callback(struct urb *urb);
+static void cypress_write_int_callback(struct urb *urb);
+
+static struct usb_serial_driver cypress_earthmate_device = {
+	.driver = {
+		.owner =		THIS_MODULE,
+		.name =			"earthmate",
+	},
+	.description =			"DeLorme Earthmate USB",
+	.id_table =			id_table_earthmate,
+	.num_ports =			1,
+	.port_probe =			cypress_earthmate_port_probe,
+	.port_remove =			cypress_port_remove,
+	.open =				cypress_open,
+	.close =			cypress_close,
+	.dtr_rts =			cypress_dtr_rts,
+	.write =			cypress_write,
+	.write_room =			cypress_write_room,
+	.init_termios =			cypress_earthmate_init_termios,
+	.set_termios =			cypress_set_termios,
+	.tiocmget =			cypress_tiocmget,
+	.tiocmset =			cypress_tiocmset,
+	.tiocmiwait =			usb_serial_generic_tiocmiwait,
+	.chars_in_buffer =		cypress_chars_in_buffer,
+	.throttle =		 	cypress_throttle,
+	.unthrottle =			cypress_unthrottle,
+	.read_int_callback =		cypress_read_int_callback,
+	.write_int_callback =		cypress_write_int_callback,
+};
+
+static struct usb_serial_driver cypress_hidcom_device = {
+	.driver = {
+		.owner =		THIS_MODULE,
+		.name =			"cyphidcom",
+	},
+	.description =			"HID->COM RS232 Adapter",
+	.id_table =			id_table_cyphidcomrs232,
+	.num_ports =			1,
+	.port_probe =			cypress_hidcom_port_probe,
+	.port_remove =			cypress_port_remove,
+	.open =				cypress_open,
+	.close =			cypress_close,
+	.dtr_rts =			cypress_dtr_rts,
+	.write =			cypress_write,
+	.write_room =			cypress_write_room,
+	.set_termios =			cypress_set_termios,
+	.tiocmget =			cypress_tiocmget,
+	.tiocmset =			cypress_tiocmset,
+	.tiocmiwait =			usb_serial_generic_tiocmiwait,
+	.chars_in_buffer =		cypress_chars_in_buffer,
+	.throttle =			cypress_throttle,
+	.unthrottle =			cypress_unthrottle,
+	.read_int_callback =		cypress_read_int_callback,
+	.write_int_callback =		cypress_write_int_callback,
+};
+
+static struct usb_serial_driver cypress_ca42v2_device = {
+	.driver = {
+		.owner =		THIS_MODULE,
+		.name =			"nokiaca42v2",
+	},
+	.description =			"Nokia CA-42 V2 Adapter",
+	.id_table =			id_table_nokiaca42v2,
+	.num_ports =			1,
+	.port_probe =			cypress_ca42v2_port_probe,
+	.port_remove =			cypress_port_remove,
+	.open =				cypress_open,
+	.close =			cypress_close,
+	.dtr_rts =			cypress_dtr_rts,
+	.write =			cypress_write,
+	.write_room =			cypress_write_room,
+	.set_termios =			cypress_set_termios,
+	.tiocmget =			cypress_tiocmget,
+	.tiocmset =			cypress_tiocmset,
+	.tiocmiwait =			usb_serial_generic_tiocmiwait,
+	.chars_in_buffer =		cypress_chars_in_buffer,
+	.throttle =			cypress_throttle,
+	.unthrottle =			cypress_unthrottle,
+	.read_int_callback =		cypress_read_int_callback,
+	.write_int_callback =		cypress_write_int_callback,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&cypress_earthmate_device, &cypress_hidcom_device,
+	&cypress_ca42v2_device, NULL
+};
+
+/*****************************************************************************
+ * Cypress serial helper functions
+ *****************************************************************************/
+
+/* FRWD Dongle hidcom needs to skip reset and speed checks */
+static inline bool is_frwd(struct usb_device *dev)
+{
+	return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
+		(le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
+}
+
+static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
+{
+	struct cypress_private *priv;
+	priv = usb_get_serial_port_data(port);
+
+	if (unstable_bauds)
+		return new_rate;
+
+	/* FRWD Dongle uses 115200 bps */
+	if (is_frwd(port->serial->dev))
+		return new_rate;
+
+	/*
+	 * The general purpose firmware for the Cypress M8 allows for
+	 * a maximum speed of 57600bps (I have no idea whether DeLorme
+	 * chose to use the general purpose firmware or not), if you
+	 * need to modify this speed setting for your own project
+	 * please add your own chiptype and modify the code likewise.
+	 * The Cypress HID->COM device will work successfully up to
+	 * 115200bps (but the actual throughput is around 3kBps).
+	 */
+	if (port->serial->dev->speed == USB_SPEED_LOW) {
+		/*
+		 * Mike Isely <isely@pobox.com> 2-Feb-2008: The
+		 * Cypress app note that describes this mechanism
+		 * states that the low-speed part can't handle more
+		 * than 800 bytes/sec, in which case 4800 baud is the
+		 * safest speed for a part like that.
+		 */
+		if (new_rate > 4800) {
+			dev_dbg(&port->dev,
+				"%s - failed setting baud rate, device incapable speed %d\n",
+				__func__, new_rate);
+			return -1;
+		}
+	}
+	switch (priv->chiptype) {
+	case CT_EARTHMATE:
+		if (new_rate <= 600) {
+			/* 300 and 600 baud rates are supported under
+			 * the generic firmware, but are not used with
+			 * NMEA and SiRF protocols */
+			dev_dbg(&port->dev,
+				"%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS\n",
+				__func__, new_rate);
+			return -1;
+		}
+		break;
+	default:
+		break;
+	}
+	return new_rate;
+}
+
+
+/* This function can either set or retrieve the current serial line settings */
+static int cypress_serial_control(struct tty_struct *tty,
+	struct usb_serial_port *port, speed_t baud_rate, int data_bits,
+	int stop_bits, int parity_enable, int parity_type, int reset,
+	int cypress_request_type)
+{
+	int new_baudrate = 0, retval = 0, tries = 0;
+	struct cypress_private *priv;
+	struct device *dev = &port->dev;
+	u8 *feature_buffer;
+	const unsigned int feature_len = 5;
+	unsigned long flags;
+
+	priv = usb_get_serial_port_data(port);
+
+	if (!priv->comm_is_ok)
+		return -ENODEV;
+
+	feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL);
+	if (!feature_buffer)
+		return -ENOMEM;
+
+	switch (cypress_request_type) {
+	case CYPRESS_SET_CONFIG:
+		/* 0 means 'Hang up' so doesn't change the true bit rate */
+		new_baudrate = priv->baud_rate;
+		if (baud_rate && baud_rate != priv->baud_rate) {
+			dev_dbg(dev, "%s - baud rate is changing\n", __func__);
+			retval = analyze_baud_rate(port, baud_rate);
+			if (retval >= 0) {
+				new_baudrate = retval;
+				dev_dbg(dev, "%s - New baud rate set to %d\n",
+					__func__, new_baudrate);
+			}
+		}
+		dev_dbg(dev, "%s - baud rate is being sent as %d\n", __func__,
+			new_baudrate);
+
+		/* fill the feature_buffer with new configuration */
+		put_unaligned_le32(new_baudrate, feature_buffer);
+		feature_buffer[4] |= data_bits - 5;   /* assign data bits in 2 bit space ( max 3 ) */
+		/* 1 bit gap */
+		feature_buffer[4] |= (stop_bits << 3);   /* assign stop bits in 1 bit space */
+		feature_buffer[4] |= (parity_enable << 4);   /* assign parity flag in 1 bit space */
+		feature_buffer[4] |= (parity_type << 5);   /* assign parity type in 1 bit space */
+		/* 1 bit gap */
+		feature_buffer[4] |= (reset << 7);   /* assign reset at end of byte, 1 bit space */
+
+		dev_dbg(dev, "%s - device is being sent this feature report:\n", __func__);
+		dev_dbg(dev, "%s - %02X - %02X - %02X - %02X - %02X\n", __func__,
+			feature_buffer[0], feature_buffer[1],
+			feature_buffer[2], feature_buffer[3],
+			feature_buffer[4]);
+
+		do {
+			retval = usb_control_msg(port->serial->dev,
+					usb_sndctrlpipe(port->serial->dev, 0),
+					HID_REQ_SET_REPORT,
+					USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
+					0x0300, 0, feature_buffer,
+					feature_len, 500);
+
+			if (tries++ >= 3)
+				break;
+
+		} while (retval != feature_len &&
+			 retval != -ENODEV);
+
+		if (retval != feature_len) {
+			dev_err(dev, "%s - failed sending serial line settings - %d\n",
+				__func__, retval);
+			cypress_set_dead(port);
+		} else {
+			spin_lock_irqsave(&priv->lock, flags);
+			priv->baud_rate = new_baudrate;
+			priv->current_config = feature_buffer[4];
+			spin_unlock_irqrestore(&priv->lock, flags);
+			/* If we asked for a speed change encode it */
+			if (baud_rate)
+				tty_encode_baud_rate(tty,
+					new_baudrate, new_baudrate);
+		}
+	break;
+	case CYPRESS_GET_CONFIG:
+		if (priv->get_cfg_unsafe) {
+			/* Not implemented for this device,
+			   and if we try to do it we're likely
+			   to crash the hardware. */
+			retval = -ENOTTY;
+			goto out;
+		}
+		dev_dbg(dev, "%s - retrieving serial line settings\n", __func__);
+		do {
+			retval = usb_control_msg(port->serial->dev,
+					usb_rcvctrlpipe(port->serial->dev, 0),
+					HID_REQ_GET_REPORT,
+					USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
+					0x0300, 0, feature_buffer,
+					feature_len, 500);
+
+			if (tries++ >= 3)
+				break;
+		} while (retval != feature_len
+						&& retval != -ENODEV);
+
+		if (retval != feature_len) {
+			dev_err(dev, "%s - failed to retrieve serial line settings - %d\n",
+				__func__, retval);
+			cypress_set_dead(port);
+			goto out;
+		} else {
+			spin_lock_irqsave(&priv->lock, flags);
+			/* store the config in one byte, and later
+			   use bit masks to check values */
+			priv->current_config = feature_buffer[4];
+			priv->baud_rate = get_unaligned_le32(feature_buffer);
+			spin_unlock_irqrestore(&priv->lock, flags);
+		}
+	}
+	spin_lock_irqsave(&priv->lock, flags);
+	++priv->cmd_count;
+	spin_unlock_irqrestore(&priv->lock, flags);
+out:
+	kfree(feature_buffer);
+	return retval;
+} /* cypress_serial_control */
+
+
+static void cypress_set_dead(struct usb_serial_port *port)
+{
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (!priv->comm_is_ok) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		return;
+	}
+	priv->comm_is_ok = 0;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
+		"interval might be too short\n", port->port_number);
+}
+
+
+/*****************************************************************************
+ * Cypress serial driver functions
+ *****************************************************************************/
+
+
+static int cypress_generic_port_probe(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct cypress_private *priv;
+
+	if (!port->interrupt_out_urb || !port->interrupt_in_urb) {
+		dev_err(&port->dev, "required endpoint is missing\n");
+		return -ENODEV;
+	}
+
+	priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->comm_is_ok = !0;
+	spin_lock_init(&priv->lock);
+	if (kfifo_alloc(&priv->write_fifo, CYPRESS_BUF_SIZE, GFP_KERNEL)) {
+		kfree(priv);
+		return -ENOMEM;
+	}
+
+	/* Skip reset for FRWD device. It is a workaound:
+	   device hangs if it receives SET_CONFIGURE in Configured
+	   state. */
+	if (!is_frwd(serial->dev))
+		usb_reset_configuration(serial->dev);
+
+	priv->cmd_ctrl = 0;
+	priv->line_control = 0;
+	priv->rx_flags = 0;
+	/* Default packet format setting is determined by packet size.
+	   Anything with a size larger then 9 must have a separate
+	   count field since the 3 bit count field is otherwise too
+	   small.  Otherwise we can use the slightly more compact
+	   format.  This is in accordance with the cypress_m8 serial
+	   converter app note. */
+	if (port->interrupt_out_size > 9)
+		priv->pkt_fmt = packet_format_1;
+	else
+		priv->pkt_fmt = packet_format_2;
+
+	if (interval > 0) {
+		priv->write_urb_interval = interval;
+		priv->read_urb_interval = interval;
+		dev_dbg(&port->dev, "%s - read & write intervals forced to %d\n",
+			__func__, interval);
+	} else {
+		priv->write_urb_interval = port->interrupt_out_urb->interval;
+		priv->read_urb_interval = port->interrupt_in_urb->interval;
+		dev_dbg(&port->dev, "%s - intervals: read=%d write=%d\n",
+			__func__, priv->read_urb_interval,
+			priv->write_urb_interval);
+	}
+	usb_set_serial_port_data(port, priv);
+
+	port->port.drain_delay = 256;
+
+	return 0;
+}
+
+
+static int cypress_earthmate_port_probe(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct cypress_private *priv;
+	int ret;
+
+	ret = cypress_generic_port_probe(port);
+	if (ret) {
+		dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
+		return ret;
+	}
+
+	priv = usb_get_serial_port_data(port);
+	priv->chiptype = CT_EARTHMATE;
+	/* All Earthmate devices use the separated-count packet
+	   format!  Idiotic. */
+	priv->pkt_fmt = packet_format_1;
+	if (serial->dev->descriptor.idProduct !=
+				cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
+		/* The old original USB Earthmate seemed able to
+		   handle GET_CONFIG requests; everything they've
+		   produced since that time crashes if this command is
+		   attempted :-( */
+		dev_dbg(&port->dev,
+			"%s - Marking this device as unsafe for GET_CONFIG commands\n",
+			__func__);
+		priv->get_cfg_unsafe = !0;
+	}
+
+	return 0;
+}
+
+static int cypress_hidcom_port_probe(struct usb_serial_port *port)
+{
+	struct cypress_private *priv;
+	int ret;
+
+	ret = cypress_generic_port_probe(port);
+	if (ret) {
+		dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
+		return ret;
+	}
+
+	priv = usb_get_serial_port_data(port);
+	priv->chiptype = CT_CYPHIDCOM;
+
+	return 0;
+}
+
+static int cypress_ca42v2_port_probe(struct usb_serial_port *port)
+{
+	struct cypress_private *priv;
+	int ret;
+
+	ret = cypress_generic_port_probe(port);
+	if (ret) {
+		dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
+		return ret;
+	}
+
+	priv = usb_get_serial_port_data(port);
+	priv->chiptype = CT_CA42V2;
+
+	return 0;
+}
+
+static void cypress_port_remove(struct usb_serial_port *port)
+{
+	struct cypress_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+
+	kfifo_free(&priv->write_fifo);
+	kfree(priv);
+}
+
+static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	unsigned long flags;
+	int result = 0;
+
+	if (!priv->comm_is_ok)
+		return -EIO;
+
+	/* clear halts before open */
+	usb_clear_halt(serial->dev, 0x81);
+	usb_clear_halt(serial->dev, 0x02);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	/* reset read/write statistics */
+	priv->bytes_in = 0;
+	priv->bytes_out = 0;
+	priv->cmd_count = 0;
+	priv->rx_flags = 0;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/* Set termios */
+	cypress_send(port);
+
+	if (tty)
+		cypress_set_termios(tty, port, NULL);
+
+	/* setup the port and start reading from the device */
+	usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
+		usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
+		port->interrupt_in_urb->transfer_buffer,
+		port->interrupt_in_urb->transfer_buffer_length,
+		cypress_read_int_callback, port, priv->read_urb_interval);
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+
+	if (result) {
+		dev_err(&port->dev,
+			"%s - failed submitting read urb, error %d\n",
+							__func__, result);
+		cypress_set_dead(port);
+	}
+
+	return result;
+} /* cypress_open */
+
+static void cypress_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+	/* drop dtr and rts */
+	spin_lock_irq(&priv->lock);
+	if (on == 0)
+		priv->line_control = 0;
+	else 
+		priv->line_control = CONTROL_DTR | CONTROL_RTS;
+	priv->cmd_ctrl = 1;
+	spin_unlock_irq(&priv->lock);
+	cypress_write(NULL, port, NULL, 0);
+}
+
+static void cypress_close(struct usb_serial_port *port)
+{
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	kfifo_reset_out(&priv->write_fifo);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	dev_dbg(&port->dev, "%s - stopping urbs\n", __func__);
+	usb_kill_urb(port->interrupt_in_urb);
+	usb_kill_urb(port->interrupt_out_urb);
+
+	if (stats)
+		dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
+			priv->bytes_in, priv->bytes_out, priv->cmd_count);
+} /* cypress_close */
+
+
+static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
+{
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+
+	dev_dbg(&port->dev, "%s - %d bytes\n", __func__, count);
+
+	/* line control commands, which need to be executed immediately,
+	   are not put into the buffer for obvious reasons.
+	 */
+	if (priv->cmd_ctrl) {
+		count = 0;
+		goto finish;
+	}
+
+	if (!count)
+		return count;
+
+	count = kfifo_in_locked(&priv->write_fifo, buf, count, &priv->lock);
+
+finish:
+	cypress_send(port);
+
+	return count;
+} /* cypress_write */
+
+
+static void cypress_send(struct usb_serial_port *port)
+{
+	int count = 0, result, offset, actual_size;
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+	struct device *dev = &port->dev;
+	unsigned long flags;
+
+	if (!priv->comm_is_ok)
+		return;
+
+	dev_dbg(dev, "%s - interrupt out size is %d\n", __func__,
+		port->interrupt_out_size);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->write_urb_in_use) {
+		dev_dbg(dev, "%s - can't write, urb in use\n", __func__);
+		spin_unlock_irqrestore(&priv->lock, flags);
+		return;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/* clear buffer */
+	memset(port->interrupt_out_urb->transfer_buffer, 0,
+						port->interrupt_out_size);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	switch (priv->pkt_fmt) {
+	default:
+	case packet_format_1:
+		/* this is for the CY7C64013... */
+		offset = 2;
+		port->interrupt_out_buffer[0] = priv->line_control;
+		break;
+	case packet_format_2:
+		/* this is for the CY7C63743... */
+		offset = 1;
+		port->interrupt_out_buffer[0] = priv->line_control;
+		break;
+	}
+
+	if (priv->line_control & CONTROL_RESET)
+		priv->line_control &= ~CONTROL_RESET;
+
+	if (priv->cmd_ctrl) {
+		priv->cmd_count++;
+		dev_dbg(dev, "%s - line control command being issued\n", __func__);
+		spin_unlock_irqrestore(&priv->lock, flags);
+		goto send;
+	} else
+		spin_unlock_irqrestore(&priv->lock, flags);
+
+	count = kfifo_out_locked(&priv->write_fifo,
+					&port->interrupt_out_buffer[offset],
+					port->interrupt_out_size - offset,
+					&priv->lock);
+	if (count == 0)
+		return;
+
+	switch (priv->pkt_fmt) {
+	default:
+	case packet_format_1:
+		port->interrupt_out_buffer[1] = count;
+		break;
+	case packet_format_2:
+		port->interrupt_out_buffer[0] |= count;
+	}
+
+	dev_dbg(dev, "%s - count is %d\n", __func__, count);
+
+send:
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->write_urb_in_use = 1;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (priv->cmd_ctrl)
+		actual_size = 1;
+	else
+		actual_size = count +
+			      (priv->pkt_fmt == packet_format_1 ? 2 : 1);
+
+	usb_serial_debug_data(dev, __func__, port->interrupt_out_size,
+			      port->interrupt_out_urb->transfer_buffer);
+
+	usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
+		usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
+		port->interrupt_out_buffer, actual_size,
+		cypress_write_int_callback, port, priv->write_urb_interval);
+	result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
+	if (result) {
+		dev_err_console(port,
+				"%s - failed submitting write urb, error %d\n",
+							__func__, result);
+		priv->write_urb_in_use = 0;
+		cypress_set_dead(port);
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->cmd_ctrl)
+		priv->cmd_ctrl = 0;
+
+	/* do not count the line control and size bytes */
+	priv->bytes_out += count;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	usb_serial_port_softint(port);
+} /* cypress_send */
+
+
+/* returns how much space is available in the soft buffer */
+static unsigned int cypress_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+	unsigned int room;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	room = kfifo_avail(&priv->write_fifo);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	dev_dbg(&port->dev, "%s - returns %u\n", __func__, room);
+	return room;
+}
+
+
+static int cypress_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+	__u8 status, control;
+	unsigned int result = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	control = priv->line_control;
+	status = priv->current_status;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	result = ((control & CONTROL_DTR)        ? TIOCM_DTR : 0)
+		| ((control & CONTROL_RTS)       ? TIOCM_RTS : 0)
+		| ((status & UART_CTS)        ? TIOCM_CTS : 0)
+		| ((status & UART_DSR)        ? TIOCM_DSR : 0)
+		| ((status & UART_RI)         ? TIOCM_RI  : 0)
+		| ((status & UART_CD)         ? TIOCM_CD  : 0);
+
+	dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
+
+	return result;
+}
+
+
+static int cypress_tiocmset(struct tty_struct *tty,
+			       unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (set & TIOCM_RTS)
+		priv->line_control |= CONTROL_RTS;
+	if (set & TIOCM_DTR)
+		priv->line_control |= CONTROL_DTR;
+	if (clear & TIOCM_RTS)
+		priv->line_control &= ~CONTROL_RTS;
+	if (clear & TIOCM_DTR)
+		priv->line_control &= ~CONTROL_DTR;
+	priv->cmd_ctrl = 1;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return cypress_write(tty, port, NULL, 0);
+}
+
+static void cypress_earthmate_init_termios(struct tty_struct *tty)
+{
+	tty_encode_baud_rate(tty, 4800, 4800);
+}
+
+static void cypress_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
+				const struct ktermios *old_termios)
+{
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+	struct device *dev = &port->dev;
+	int data_bits, stop_bits, parity_type, parity_enable;
+	unsigned int cflag;
+	unsigned long flags;
+	__u8 oldlines;
+	int linechange = 0;
+
+	/* Unsupported features need clearing */
+	tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS);
+
+	cflag = tty->termios.c_cflag;
+
+	/* set number of data bits, parity, stop bits */
+	/* when parity is disabled the parity type bit is ignored */
+
+	/* 1 means 2 stop bits, 0 means 1 stop bit */
+	stop_bits = cflag & CSTOPB ? 1 : 0;
+
+	if (cflag & PARENB) {
+		parity_enable = 1;
+		/* 1 means odd parity, 0 means even parity */
+		parity_type = cflag & PARODD ? 1 : 0;
+	} else
+		parity_enable = parity_type = 0;
+
+	data_bits = tty_get_char_size(cflag);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	oldlines = priv->line_control;
+	if ((cflag & CBAUD) == B0) {
+		/* drop dtr and rts */
+		dev_dbg(dev, "%s - dropping the lines, baud rate 0bps\n", __func__);
+		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+	} else
+		priv->line_control = (CONTROL_DTR | CONTROL_RTS);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	dev_dbg(dev, "%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)\n",
+		__func__, stop_bits, parity_enable, parity_type, data_bits);
+
+	cypress_serial_control(tty, port, tty_get_baud_rate(tty),
+			data_bits, stop_bits,
+			parity_enable, parity_type,
+			0, CYPRESS_SET_CONFIG);
+
+	/* we perform a CYPRESS_GET_CONFIG so that the current settings are
+	 * filled into the private structure this should confirm that all is
+	 * working if it returns what we just set */
+	cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
+
+	/* Here we can define custom tty settings for devices; the main tty
+	 * termios flag base comes from empeg.c */
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
+		dev_dbg(dev, "Using custom termios settings for a baud rate of 4800bps.\n");
+		/* define custom termios settings for NMEA protocol */
+
+		tty->termios.c_iflag /* input modes - */
+			&= ~(IGNBRK  /* disable ignore break */
+			| BRKINT     /* disable break causes interrupt */
+			| PARMRK     /* disable mark parity errors */
+			| ISTRIP     /* disable clear high bit of input char */
+			| INLCR      /* disable translate NL to CR */
+			| IGNCR      /* disable ignore CR */
+			| ICRNL      /* disable translate CR to NL */
+			| IXON);     /* disable enable XON/XOFF flow control */
+
+		tty->termios.c_oflag /* output modes */
+			&= ~OPOST;    /* disable postprocess output char */
+
+		tty->termios.c_lflag /* line discipline modes */
+			&= ~(ECHO     /* disable echo input characters */
+			| ECHONL      /* disable echo new line */
+			| ICANON      /* disable erase, kill, werase, and rprnt
+					 special characters */
+			| ISIG        /* disable interrupt, quit, and suspend
+					 special characters */
+			| IEXTEN);    /* disable non-POSIX special characters */
+	} /* CT_CYPHIDCOM: Application should handle this for device */
+
+	linechange = (priv->line_control != oldlines);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/* if necessary, set lines */
+	if (linechange) {
+		priv->cmd_ctrl = 1;
+		cypress_write(tty, port, NULL, 0);
+	}
+} /* cypress_set_termios */
+
+
+/* returns amount of data still left in soft buffer */
+static unsigned int cypress_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+	unsigned int chars;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	chars = kfifo_len(&priv->write_fifo);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars);
+	return chars;
+}
+
+
+static void cypress_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+
+	spin_lock_irq(&priv->lock);
+	priv->rx_flags = THROTTLED;
+	spin_unlock_irq(&priv->lock);
+}
+
+
+static void cypress_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+	int actually_throttled, result;
+
+	spin_lock_irq(&priv->lock);
+	actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
+	priv->rx_flags = 0;
+	spin_unlock_irq(&priv->lock);
+
+	if (!priv->comm_is_ok)
+		return;
+
+	if (actually_throttled) {
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+		if (result) {
+			dev_err(&port->dev, "%s - failed submitting read urb, "
+					"error %d\n", __func__, result);
+			cypress_set_dead(port);
+		}
+	}
+}
+
+
+static void cypress_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+	struct device *dev = &urb->dev->dev;
+	struct tty_struct *tty;
+	unsigned char *data = urb->transfer_buffer;
+	unsigned long flags;
+	char tty_flag = TTY_NORMAL;
+	int bytes = 0;
+	int result;
+	int i = 0;
+	int status = urb->status;
+
+	switch (status) {
+	case 0: /* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* precursor to disconnect so just go away */
+		return;
+	case -EPIPE:
+		/* Can't call usb_clear_halt while in_interrupt */
+		fallthrough;
+	default:
+		/* something ugly is going on... */
+		dev_err(dev, "%s - unexpected nonzero read status received: %d\n",
+			__func__, status);
+		cypress_set_dead(port);
+		return;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->rx_flags & THROTTLED) {
+		dev_dbg(dev, "%s - now throttling\n", __func__);
+		priv->rx_flags |= ACTUALLY_THROTTLED;
+		spin_unlock_irqrestore(&priv->lock, flags);
+		return;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	tty = tty_port_tty_get(&port->port);
+	if (!tty) {
+		dev_dbg(dev, "%s - bad tty pointer - exiting\n", __func__);
+		return;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	result = urb->actual_length;
+	switch (priv->pkt_fmt) {
+	default:
+	case packet_format_1:
+		/* This is for the CY7C64013... */
+		priv->current_status = data[0] & 0xF8;
+		bytes = data[1] + 2;
+		i = 2;
+		break;
+	case packet_format_2:
+		/* This is for the CY7C63743... */
+		priv->current_status = data[0] & 0xF8;
+		bytes = (data[0] & 0x07) + 1;
+		i = 1;
+		break;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+	if (result < bytes) {
+		dev_dbg(dev,
+			"%s - wrong packet size - received %d bytes but packet said %d bytes\n",
+			__func__, result, bytes);
+		goto continue_read;
+	}
+
+	usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	/* check to see if status has changed */
+	if (priv->current_status != priv->prev_status) {
+		u8 delta = priv->current_status ^ priv->prev_status;
+
+		if (delta & UART_MSR_MASK) {
+			if (delta & UART_CTS)
+				port->icount.cts++;
+			if (delta & UART_DSR)
+				port->icount.dsr++;
+			if (delta & UART_RI)
+				port->icount.rng++;
+			if (delta & UART_CD)
+				port->icount.dcd++;
+
+			wake_up_interruptible(&port->port.delta_msr_wait);
+		}
+
+		priv->prev_status = priv->current_status;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/* hangup, as defined in acm.c... this might be a bad place for it
+	 * though */
+	if (tty && !C_CLOCAL(tty) && !(priv->current_status & UART_CD)) {
+		dev_dbg(dev, "%s - calling hangup\n", __func__);
+		tty_hangup(tty);
+		goto continue_read;
+	}
+
+	/* There is one error bit... I'm assuming it is a parity error
+	 * indicator as the generic firmware will set this bit to 1 if a
+	 * parity error occurs.
+	 * I can not find reference to any other error events. */
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->current_status & CYP_ERROR) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		tty_flag = TTY_PARITY;
+		dev_dbg(dev, "%s - Parity Error detected\n", __func__);
+	} else
+		spin_unlock_irqrestore(&priv->lock, flags);
+
+	/* process read if there is data other than line status */
+	if (bytes > i) {
+		tty_insert_flip_string_fixed_flag(&port->port, data + i,
+				tty_flag, bytes - i);
+		tty_flip_buffer_push(&port->port);
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	/* control and status byte(s) are also counted */
+	priv->bytes_in += bytes;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+continue_read:
+	tty_kref_put(tty);
+
+	/* Continue trying to always read */
+
+	if (priv->comm_is_ok) {
+		usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
+				usb_rcvintpipe(port->serial->dev,
+					port->interrupt_in_endpointAddress),
+				port->interrupt_in_urb->transfer_buffer,
+				port->interrupt_in_urb->transfer_buffer_length,
+				cypress_read_int_callback, port,
+				priv->read_urb_interval);
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+		if (result && result != -EPERM) {
+			dev_err(dev, "%s - failed resubmitting read urb, error %d\n",
+				__func__, result);
+			cypress_set_dead(port);
+		}
+	}
+} /* cypress_read_int_callback */
+
+
+static void cypress_write_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+	struct device *dev = &urb->dev->dev;
+	int status = urb->status;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
+		priv->write_urb_in_use = 0;
+		return;
+	case -EPIPE:
+		/* Cannot call usb_clear_halt while in_interrupt */
+		fallthrough;
+	default:
+		dev_err(dev, "%s - unexpected nonzero write status received: %d\n",
+			__func__, status);
+		cypress_set_dead(port);
+		break;
+	}
+	priv->write_urb_in_use = 0;
+
+	/* send any buffered data */
+	cypress_send(port);
+}
+
+module_usb_serial_driver(serial_drivers, id_table_combined);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(stats, bool, 0644);
+MODULE_PARM_DESC(stats, "Enable statistics or not");
+module_param(interval, int, 0644);
+MODULE_PARM_DESC(interval, "Overrides interrupt interval");
+module_param(unstable_bauds, bool, 0644);
+MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates");
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
new file mode 100644
index 000000000..16b7410ad
--- /dev/null
+++ b/drivers/usb/serial/cypress_m8.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef CYPRESS_M8_H
+#define CYPRESS_M8_H
+
+/*
+ * definitions and function prototypes used for the cypress USB to Serial
+ * controller
+ */
+
+/*
+ * For sending our feature buffer - controlling serial communication states.
+ * Linux HID has no support for serial devices so we do this through the driver
+ */
+#define HID_REQ_GET_REPORT	0x01
+#define HID_REQ_SET_REPORT	0x09
+
+/* List other cypress USB to Serial devices here, and add them to the id_table */
+
+/* DeLorme Earthmate USB - a GPS device */
+#define VENDOR_ID_DELORME		0x1163
+#define PRODUCT_ID_EARTHMATEUSB		0x0100
+#define PRODUCT_ID_EARTHMATEUSB_LT20	0x0200
+
+/* Cypress HID->COM RS232 Adapter */
+#define VENDOR_ID_CYPRESS		0x04b4
+#define PRODUCT_ID_CYPHIDCOM		0x5500
+
+/* Simply Automated HID->COM UPB PIM (using Cypress PID 0x5500) */
+#define VENDOR_ID_SAI			0x17dd
+
+/* FRWD Dongle - a GPS sports watch */
+#define VENDOR_ID_FRWD			0x6737
+#define PRODUCT_ID_CYPHIDCOM_FRWD	0x0001
+
+/* Powercom UPS, chip CY7C63723 */
+#define VENDOR_ID_POWERCOM		0x0d9f
+#define PRODUCT_ID_UPS			0x0002
+
+/* Nokia CA-42 USB to serial cable */
+#define VENDOR_ID_DAZZLE		0x07d0
+#define PRODUCT_ID_CA42			0x4101
+/* End of device listing */
+
+/* Used for setting / requesting serial line settings */
+#define CYPRESS_SET_CONFIG	0x01
+#define CYPRESS_GET_CONFIG	0x02
+
+/* Used for throttle control */
+#define THROTTLED		0x1
+#define ACTUALLY_THROTTLED	0x2
+
+/*
+ * chiptypes - used in case firmware differs from the generic form ... offering
+ * different baud speeds/etc.
+ */
+#define CT_EARTHMATE	0x01
+#define CT_CYPHIDCOM	0x02
+#define CT_CA42V2	0x03
+#define CT_GENERIC	0x0F
+/* End of chiptype definitions */
+
+/*
+ * RS-232 serial data communication protocol definitions.
+ *
+ * These are sent / read at byte 0 of the input/output hid reports.
+ * You can find these values defined in the CY4601 USB to Serial design notes.
+ */
+
+#define CONTROL_DTR	0x20	/* data terminal ready */
+#define CONTROL_RTS	0x10	/* request to send */
+#define CONTROL_RESET	0x08	/* sent with output report */
+
+#define UART_MSR_MASK	0xf0
+#define UART_RI		0x80	/* ring indicator */
+#define UART_CD		0x40	/* carrier detect */
+#define UART_DSR	0x20	/* data set ready */
+#define UART_CTS	0x10	/* clear to send */
+#define CYP_ERROR	0x08	/* received from input report */
+
+/* End of RS-232 protocol definitions */
+
+#endif /* CYPRESS_M8_H */
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
new file mode 100644
index 000000000..45d688e9b
--- /dev/null
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -0,0 +1,1534 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+*  Digi AccelePort USB-4 and USB-2 Serial Converters
+*
+*  Copyright 2000 by Digi International
+*
+*  Shamelessly based on Brian Warner's keyspan_pda.c and Greg Kroah-Hartman's
+*  usb-serial driver.
+*
+*  Peter Berger (pberger@brimson.com)
+*  Al Borchers (borchers@steinerpoint.com)
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/wait.h>
+#include <linux/sched/signal.h>
+#include <linux/usb/serial.h>
+
+/* Defines */
+
+#define DRIVER_AUTHOR "Peter Berger <pberger@brimson.com>, Al Borchers <borchers@steinerpoint.com>"
+#define DRIVER_DESC "Digi AccelePort USB-2/USB-4 Serial Converter driver"
+
+/* port output buffer length -- must be <= transfer buffer length - 2 */
+/* so we can be sure to send the full buffer in one urb */
+#define DIGI_OUT_BUF_SIZE		8
+
+/* port input buffer length -- must be >= transfer buffer length - 3 */
+/* so we can be sure to hold at least one full buffer from one urb */
+#define DIGI_IN_BUF_SIZE		64
+
+/* retry timeout while sleeping */
+#define DIGI_RETRY_TIMEOUT		(HZ/10)
+
+/* timeout while waiting for tty output to drain in close */
+/* this delay is used twice in close, so the total delay could */
+/* be twice this value */
+#define DIGI_CLOSE_TIMEOUT		(5*HZ)
+
+
+/* AccelePort USB Defines */
+
+/* ids */
+#define DIGI_VENDOR_ID			0x05c5
+#define DIGI_2_ID			0x0002	/* USB-2 */
+#define DIGI_4_ID			0x0004	/* USB-4 */
+
+/* commands
+ * "INB": can be used on the in-band endpoint
+ * "OOB": can be used on the out-of-band endpoint
+ */
+#define DIGI_CMD_SET_BAUD_RATE			0	/* INB, OOB */
+#define DIGI_CMD_SET_WORD_SIZE			1	/* INB, OOB */
+#define DIGI_CMD_SET_PARITY			2	/* INB, OOB */
+#define DIGI_CMD_SET_STOP_BITS			3	/* INB, OOB */
+#define DIGI_CMD_SET_INPUT_FLOW_CONTROL		4	/* INB, OOB */
+#define DIGI_CMD_SET_OUTPUT_FLOW_CONTROL	5	/* INB, OOB */
+#define DIGI_CMD_SET_DTR_SIGNAL			6	/* INB, OOB */
+#define DIGI_CMD_SET_RTS_SIGNAL			7	/* INB, OOB */
+#define DIGI_CMD_READ_INPUT_SIGNALS		8	/*      OOB */
+#define DIGI_CMD_IFLUSH_FIFO			9	/*      OOB */
+#define DIGI_CMD_RECEIVE_ENABLE			10	/* INB, OOB */
+#define DIGI_CMD_BREAK_CONTROL			11	/* INB, OOB */
+#define DIGI_CMD_LOCAL_LOOPBACK			12	/* INB, OOB */
+#define DIGI_CMD_TRANSMIT_IDLE			13	/* INB, OOB */
+#define DIGI_CMD_READ_UART_REGISTER		14	/*      OOB */
+#define DIGI_CMD_WRITE_UART_REGISTER		15	/* INB, OOB */
+#define DIGI_CMD_AND_UART_REGISTER		16	/* INB, OOB */
+#define DIGI_CMD_OR_UART_REGISTER		17	/* INB, OOB */
+#define DIGI_CMD_SEND_DATA			18	/* INB      */
+#define DIGI_CMD_RECEIVE_DATA			19	/* INB      */
+#define DIGI_CMD_RECEIVE_DISABLE		20	/* INB      */
+#define DIGI_CMD_GET_PORT_TYPE			21	/*      OOB */
+
+/* baud rates */
+#define DIGI_BAUD_50				0
+#define DIGI_BAUD_75				1
+#define DIGI_BAUD_110				2
+#define DIGI_BAUD_150				3
+#define DIGI_BAUD_200				4
+#define DIGI_BAUD_300				5
+#define DIGI_BAUD_600				6
+#define DIGI_BAUD_1200				7
+#define DIGI_BAUD_1800				8
+#define DIGI_BAUD_2400				9
+#define DIGI_BAUD_4800				10
+#define DIGI_BAUD_7200				11
+#define DIGI_BAUD_9600				12
+#define DIGI_BAUD_14400				13
+#define DIGI_BAUD_19200				14
+#define DIGI_BAUD_28800				15
+#define DIGI_BAUD_38400				16
+#define DIGI_BAUD_57600				17
+#define DIGI_BAUD_76800				18
+#define DIGI_BAUD_115200			19
+#define DIGI_BAUD_153600			20
+#define DIGI_BAUD_230400			21
+#define DIGI_BAUD_460800			22
+
+/* arguments */
+#define DIGI_WORD_SIZE_5			0
+#define DIGI_WORD_SIZE_6			1
+#define DIGI_WORD_SIZE_7			2
+#define DIGI_WORD_SIZE_8			3
+
+#define DIGI_PARITY_NONE			0
+#define DIGI_PARITY_ODD				1
+#define DIGI_PARITY_EVEN			2
+#define DIGI_PARITY_MARK			3
+#define DIGI_PARITY_SPACE			4
+
+#define DIGI_STOP_BITS_1			0
+#define DIGI_STOP_BITS_2			1
+
+#define DIGI_INPUT_FLOW_CONTROL_XON_XOFF	1
+#define DIGI_INPUT_FLOW_CONTROL_RTS		2
+#define DIGI_INPUT_FLOW_CONTROL_DTR		4
+
+#define DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF	1
+#define DIGI_OUTPUT_FLOW_CONTROL_CTS		2
+#define DIGI_OUTPUT_FLOW_CONTROL_DSR		4
+
+#define DIGI_DTR_INACTIVE			0
+#define DIGI_DTR_ACTIVE				1
+#define DIGI_DTR_INPUT_FLOW_CONTROL		2
+
+#define DIGI_RTS_INACTIVE			0
+#define DIGI_RTS_ACTIVE				1
+#define DIGI_RTS_INPUT_FLOW_CONTROL		2
+#define DIGI_RTS_TOGGLE				3
+
+#define DIGI_FLUSH_TX				1
+#define DIGI_FLUSH_RX				2
+#define DIGI_RESUME_TX				4 /* clears xoff condition */
+
+#define DIGI_TRANSMIT_NOT_IDLE			0
+#define DIGI_TRANSMIT_IDLE			1
+
+#define DIGI_DISABLE				0
+#define DIGI_ENABLE				1
+
+#define DIGI_DEASSERT				0
+#define DIGI_ASSERT				1
+
+/* in band status codes */
+#define DIGI_OVERRUN_ERROR			4
+#define DIGI_PARITY_ERROR			8
+#define DIGI_FRAMING_ERROR			16
+#define DIGI_BREAK_ERROR			32
+
+/* out of band status */
+#define DIGI_NO_ERROR				0
+#define DIGI_BAD_FIRST_PARAMETER		1
+#define DIGI_BAD_SECOND_PARAMETER		2
+#define DIGI_INVALID_LINE			3
+#define DIGI_INVALID_OPCODE			4
+
+/* input signals */
+#define DIGI_READ_INPUT_SIGNALS_SLOT		1
+#define DIGI_READ_INPUT_SIGNALS_ERR		2
+#define DIGI_READ_INPUT_SIGNALS_BUSY		4
+#define DIGI_READ_INPUT_SIGNALS_PE		8
+#define DIGI_READ_INPUT_SIGNALS_CTS		16
+#define DIGI_READ_INPUT_SIGNALS_DSR		32
+#define DIGI_READ_INPUT_SIGNALS_RI		64
+#define DIGI_READ_INPUT_SIGNALS_DCD		128
+
+
+/* Structures */
+
+struct digi_serial {
+	spinlock_t ds_serial_lock;
+	struct usb_serial_port *ds_oob_port;	/* out-of-band port */
+	int ds_oob_port_num;			/* index of out-of-band port */
+	int ds_device_started;
+};
+
+struct digi_port {
+	spinlock_t dp_port_lock;
+	int dp_port_num;
+	int dp_out_buf_len;
+	unsigned char dp_out_buf[DIGI_OUT_BUF_SIZE];
+	int dp_write_urb_in_use;
+	unsigned int dp_modem_signals;
+	int dp_transmit_idle;
+	wait_queue_head_t dp_transmit_idle_wait;
+	int dp_throttled;
+	int dp_throttle_restart;
+	wait_queue_head_t dp_flush_wait;
+	wait_queue_head_t dp_close_wait;	/* wait queue for close */
+	wait_queue_head_t write_wait;
+	struct usb_serial_port *dp_port;
+};
+
+
+/* Local Function Declarations */
+
+static int digi_write_oob_command(struct usb_serial_port *port,
+	unsigned char *buf, int count, int interruptible);
+static int digi_write_inb_command(struct usb_serial_port *port,
+	unsigned char *buf, int count, unsigned long timeout);
+static int digi_set_modem_signals(struct usb_serial_port *port,
+	unsigned int modem_signals, int interruptible);
+static int digi_transmit_idle(struct usb_serial_port *port,
+	unsigned long timeout);
+static void digi_rx_throttle(struct tty_struct *tty);
+static void digi_rx_unthrottle(struct tty_struct *tty);
+static void digi_set_termios(struct tty_struct *tty,
+			     struct usb_serial_port *port,
+			     const struct ktermios *old_termios);
+static void digi_break_ctl(struct tty_struct *tty, int break_state);
+static int digi_tiocmget(struct tty_struct *tty);
+static int digi_tiocmset(struct tty_struct *tty, unsigned int set,
+		unsigned int clear);
+static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
+		const unsigned char *buf, int count);
+static void digi_write_bulk_callback(struct urb *urb);
+static unsigned int digi_write_room(struct tty_struct *tty);
+static unsigned int digi_chars_in_buffer(struct tty_struct *tty);
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
+static void digi_close(struct usb_serial_port *port);
+static void digi_dtr_rts(struct usb_serial_port *port, int on);
+static int digi_startup_device(struct usb_serial *serial);
+static int digi_startup(struct usb_serial *serial);
+static void digi_disconnect(struct usb_serial *serial);
+static void digi_release(struct usb_serial *serial);
+static int digi_port_probe(struct usb_serial_port *port);
+static void digi_port_remove(struct usb_serial_port *port);
+static void digi_read_bulk_callback(struct urb *urb);
+static int digi_read_inb_callback(struct urb *urb);
+static int digi_read_oob_callback(struct urb *urb);
+
+
+static const struct usb_device_id id_table_combined[] = {
+	{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
+	{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
+	{ }						/* Terminating entry */
+};
+
+static const struct usb_device_id id_table_2[] = {
+	{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
+	{ }						/* Terminating entry */
+};
+
+static const struct usb_device_id id_table_4[] = {
+	{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table_combined);
+
+/* device info needed for the Digi serial converter */
+
+static struct usb_serial_driver digi_acceleport_2_device = {
+	.driver = {
+		.owner =		THIS_MODULE,
+		.name =			"digi_2",
+	},
+	.description =			"Digi 2 port USB adapter",
+	.id_table =			id_table_2,
+	.num_ports =			3,
+	.num_bulk_in =			4,
+	.num_bulk_out =			4,
+	.open =				digi_open,
+	.close =			digi_close,
+	.dtr_rts =			digi_dtr_rts,
+	.write =			digi_write,
+	.write_room =			digi_write_room,
+	.write_bulk_callback = 		digi_write_bulk_callback,
+	.read_bulk_callback =		digi_read_bulk_callback,
+	.chars_in_buffer =		digi_chars_in_buffer,
+	.throttle =			digi_rx_throttle,
+	.unthrottle =			digi_rx_unthrottle,
+	.set_termios =			digi_set_termios,
+	.break_ctl =			digi_break_ctl,
+	.tiocmget =			digi_tiocmget,
+	.tiocmset =			digi_tiocmset,
+	.attach =			digi_startup,
+	.disconnect =			digi_disconnect,
+	.release =			digi_release,
+	.port_probe =			digi_port_probe,
+	.port_remove =			digi_port_remove,
+};
+
+static struct usb_serial_driver digi_acceleport_4_device = {
+	.driver = {
+		.owner =		THIS_MODULE,
+		.name =			"digi_4",
+	},
+	.description =			"Digi 4 port USB adapter",
+	.id_table =			id_table_4,
+	.num_ports =			4,
+	.num_bulk_in =			5,
+	.num_bulk_out =			5,
+	.open =				digi_open,
+	.close =			digi_close,
+	.write =			digi_write,
+	.write_room =			digi_write_room,
+	.write_bulk_callback = 		digi_write_bulk_callback,
+	.read_bulk_callback =		digi_read_bulk_callback,
+	.chars_in_buffer =		digi_chars_in_buffer,
+	.throttle =			digi_rx_throttle,
+	.unthrottle =			digi_rx_unthrottle,
+	.set_termios =			digi_set_termios,
+	.break_ctl =			digi_break_ctl,
+	.tiocmget =			digi_tiocmget,
+	.tiocmset =			digi_tiocmset,
+	.attach =			digi_startup,
+	.disconnect =			digi_disconnect,
+	.release =			digi_release,
+	.port_probe =			digi_port_probe,
+	.port_remove =			digi_port_remove,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&digi_acceleport_2_device, &digi_acceleport_4_device, NULL
+};
+
+/* Functions */
+
+/*
+ *  Cond Wait Interruptible Timeout Irqrestore
+ *
+ *  Do spin_unlock_irqrestore and interruptible_sleep_on_timeout
+ *  so that wake ups are not lost if they occur between the unlock
+ *  and the sleep.  In other words, spin_unlock_irqrestore and
+ *  interruptible_sleep_on_timeout are "atomic" with respect to
+ *  wake ups.  This is used to implement condition variables.
+ *
+ *  interruptible_sleep_on_timeout is deprecated and has been replaced
+ *  with the equivalent code.
+ */
+
+static long cond_wait_interruptible_timeout_irqrestore(
+	wait_queue_head_t *q, long timeout,
+	spinlock_t *lock, unsigned long flags)
+__releases(lock)
+{
+	DEFINE_WAIT(wait);
+
+	prepare_to_wait(q, &wait, TASK_INTERRUPTIBLE);
+	spin_unlock_irqrestore(lock, flags);
+	timeout = schedule_timeout(timeout);
+	finish_wait(q, &wait);
+
+	return timeout;
+}
+
+/*
+ *  Digi Write OOB Command
+ *
+ *  Write commands on the out of band port.  Commands are 4
+ *  bytes each, multiple commands can be sent at once, and
+ *  no command will be split across USB packets.  Returns 0
+ *  if successful, -EINTR if interrupted while sleeping and
+ *  the interruptible flag is true, or a negative error
+ *  returned by usb_submit_urb.
+ */
+
+static int digi_write_oob_command(struct usb_serial_port *port,
+	unsigned char *buf, int count, int interruptible)
+{
+	int ret = 0;
+	int len;
+	struct usb_serial_port *oob_port = (struct usb_serial_port *)((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
+	struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
+	unsigned long flags;
+
+	dev_dbg(&port->dev,
+		"digi_write_oob_command: TOP: port=%d, count=%d\n",
+		oob_priv->dp_port_num, count);
+
+	spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
+	while (count > 0) {
+		while (oob_priv->dp_write_urb_in_use) {
+			cond_wait_interruptible_timeout_irqrestore(
+				&oob_priv->write_wait, DIGI_RETRY_TIMEOUT,
+				&oob_priv->dp_port_lock, flags);
+			if (interruptible && signal_pending(current))
+				return -EINTR;
+			spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
+		}
+
+		/* len must be a multiple of 4, so commands are not split */
+		len = min(count, oob_port->bulk_out_size);
+		if (len > 4)
+			len &= ~3;
+		memcpy(oob_port->write_urb->transfer_buffer, buf, len);
+		oob_port->write_urb->transfer_buffer_length = len;
+		ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
+		if (ret == 0) {
+			oob_priv->dp_write_urb_in_use = 1;
+			count -= len;
+			buf += len;
+		}
+	}
+	spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
+	if (ret)
+		dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
+			__func__, ret);
+	return ret;
+
+}
+
+
+/*
+ *  Digi Write In Band Command
+ *
+ *  Write commands on the given port.  Commands are 4
+ *  bytes each, multiple commands can be sent at once, and
+ *  no command will be split across USB packets.  If timeout
+ *  is non-zero, write in band command will return after
+ *  waiting unsuccessfully for the URB status to clear for
+ *  timeout ticks.  Returns 0 if successful, or a negative
+ *  error returned by digi_write.
+ */
+
+static int digi_write_inb_command(struct usb_serial_port *port,
+	unsigned char *buf, int count, unsigned long timeout)
+{
+	int ret = 0;
+	int len;
+	struct digi_port *priv = usb_get_serial_port_data(port);
+	unsigned char *data = port->write_urb->transfer_buffer;
+	unsigned long flags;
+
+	dev_dbg(&port->dev, "digi_write_inb_command: TOP: port=%d, count=%d\n",
+		priv->dp_port_num, count);
+
+	if (timeout)
+		timeout += jiffies;
+	else
+		timeout = ULONG_MAX;
+
+	spin_lock_irqsave(&priv->dp_port_lock, flags);
+	while (count > 0 && ret == 0) {
+		while (priv->dp_write_urb_in_use &&
+		       time_before(jiffies, timeout)) {
+			cond_wait_interruptible_timeout_irqrestore(
+				&priv->write_wait, DIGI_RETRY_TIMEOUT,
+				&priv->dp_port_lock, flags);
+			if (signal_pending(current))
+				return -EINTR;
+			spin_lock_irqsave(&priv->dp_port_lock, flags);
+		}
+
+		/* len must be a multiple of 4 and small enough to */
+		/* guarantee the write will send buffered data first, */
+		/* so commands are in order with data and not split */
+		len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
+		if (len > 4)
+			len &= ~3;
+
+		/* write any buffered data first */
+		if (priv->dp_out_buf_len > 0) {
+			data[0] = DIGI_CMD_SEND_DATA;
+			data[1] = priv->dp_out_buf_len;
+			memcpy(data + 2, priv->dp_out_buf,
+				priv->dp_out_buf_len);
+			memcpy(data + 2 + priv->dp_out_buf_len, buf, len);
+			port->write_urb->transfer_buffer_length
+				= priv->dp_out_buf_len + 2 + len;
+		} else {
+			memcpy(data, buf, len);
+			port->write_urb->transfer_buffer_length = len;
+		}
+
+		ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+		if (ret == 0) {
+			priv->dp_write_urb_in_use = 1;
+			priv->dp_out_buf_len = 0;
+			count -= len;
+			buf += len;
+		}
+
+	}
+	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
+	if (ret)
+		dev_err(&port->dev,
+			"%s: usb_submit_urb failed, ret=%d, port=%d\n",
+			__func__, ret, priv->dp_port_num);
+	return ret;
+}
+
+
+/*
+ *  Digi Set Modem Signals
+ *
+ *  Sets or clears DTR and RTS on the port, according to the
+ *  modem_signals argument.  Use TIOCM_DTR and TIOCM_RTS flags
+ *  for the modem_signals argument.  Returns 0 if successful,
+ *  -EINTR if interrupted while sleeping, or a non-zero error
+ *  returned by usb_submit_urb.
+ */
+
+static int digi_set_modem_signals(struct usb_serial_port *port,
+	unsigned int modem_signals, int interruptible)
+{
+
+	int ret;
+	struct digi_port *port_priv = usb_get_serial_port_data(port);
+	struct usb_serial_port *oob_port = (struct usb_serial_port *) ((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
+	struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
+	unsigned char *data = oob_port->write_urb->transfer_buffer;
+	unsigned long flags;
+
+	dev_dbg(&port->dev,
+		"digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x\n",
+		port_priv->dp_port_num, modem_signals);
+
+	spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
+	spin_lock(&port_priv->dp_port_lock);
+
+	while (oob_priv->dp_write_urb_in_use) {
+		spin_unlock(&port_priv->dp_port_lock);
+		cond_wait_interruptible_timeout_irqrestore(
+			&oob_priv->write_wait, DIGI_RETRY_TIMEOUT,
+			&oob_priv->dp_port_lock, flags);
+		if (interruptible && signal_pending(current))
+			return -EINTR;
+		spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
+		spin_lock(&port_priv->dp_port_lock);
+	}
+	data[0] = DIGI_CMD_SET_DTR_SIGNAL;
+	data[1] = port_priv->dp_port_num;
+	data[2] = (modem_signals & TIOCM_DTR) ?
+					DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE;
+	data[3] = 0;
+	data[4] = DIGI_CMD_SET_RTS_SIGNAL;
+	data[5] = port_priv->dp_port_num;
+	data[6] = (modem_signals & TIOCM_RTS) ?
+					DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE;
+	data[7] = 0;
+
+	oob_port->write_urb->transfer_buffer_length = 8;
+
+	ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
+	if (ret == 0) {
+		oob_priv->dp_write_urb_in_use = 1;
+		port_priv->dp_modem_signals &= ~(TIOCM_DTR | TIOCM_RTS);
+		port_priv->dp_modem_signals |=
+				modem_signals & (TIOCM_DTR | TIOCM_RTS);
+	}
+	spin_unlock(&port_priv->dp_port_lock);
+	spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
+	if (ret)
+		dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
+			__func__, ret);
+	return ret;
+}
+
+/*
+ *  Digi Transmit Idle
+ *
+ *  Digi transmit idle waits, up to timeout ticks, for the transmitter
+ *  to go idle.  It returns 0 if successful or a negative error.
+ *
+ *  There are race conditions here if more than one process is calling
+ *  digi_transmit_idle on the same port at the same time.  However, this
+ *  is only called from close, and only one process can be in close on a
+ *  port at a time, so its ok.
+ */
+
+static int digi_transmit_idle(struct usb_serial_port *port,
+	unsigned long timeout)
+{
+	int ret;
+	unsigned char buf[2];
+	struct digi_port *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->dp_port_lock, flags);
+	priv->dp_transmit_idle = 0;
+	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
+	buf[0] = DIGI_CMD_TRANSMIT_IDLE;
+	buf[1] = 0;
+
+	timeout += jiffies;
+
+	ret = digi_write_inb_command(port, buf, 2, timeout - jiffies);
+	if (ret != 0)
+		return ret;
+
+	spin_lock_irqsave(&priv->dp_port_lock, flags);
+
+	while (time_before(jiffies, timeout) && !priv->dp_transmit_idle) {
+		cond_wait_interruptible_timeout_irqrestore(
+			&priv->dp_transmit_idle_wait, DIGI_RETRY_TIMEOUT,
+			&priv->dp_port_lock, flags);
+		if (signal_pending(current))
+			return -EINTR;
+		spin_lock_irqsave(&priv->dp_port_lock, flags);
+	}
+	priv->dp_transmit_idle = 0;
+	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+	return 0;
+
+}
+
+
+static void digi_rx_throttle(struct tty_struct *tty)
+{
+	unsigned long flags;
+	struct usb_serial_port *port = tty->driver_data;
+	struct digi_port *priv = usb_get_serial_port_data(port);
+
+	/* stop receiving characters by not resubmitting the read urb */
+	spin_lock_irqsave(&priv->dp_port_lock, flags);
+	priv->dp_throttled = 1;
+	priv->dp_throttle_restart = 0;
+	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+}
+
+
+static void digi_rx_unthrottle(struct tty_struct *tty)
+{
+	int ret = 0;
+	unsigned long flags;
+	struct usb_serial_port *port = tty->driver_data;
+	struct digi_port *priv = usb_get_serial_port_data(port);
+
+	spin_lock_irqsave(&priv->dp_port_lock, flags);
+
+	/* restart read chain */
+	if (priv->dp_throttle_restart)
+		ret = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+
+	/* turn throttle off */
+	priv->dp_throttled = 0;
+	priv->dp_throttle_restart = 0;
+
+	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
+	if (ret)
+		dev_err(&port->dev,
+			"%s: usb_submit_urb failed, ret=%d, port=%d\n",
+			__func__, ret, priv->dp_port_num);
+}
+
+
+static void digi_set_termios(struct tty_struct *tty,
+			     struct usb_serial_port *port,
+			     const struct ktermios *old_termios)
+{
+	struct digi_port *priv = usb_get_serial_port_data(port);
+	struct device *dev = &port->dev;
+	unsigned int iflag = tty->termios.c_iflag;
+	unsigned int cflag = tty->termios.c_cflag;
+	unsigned int old_iflag = old_termios->c_iflag;
+	unsigned int old_cflag = old_termios->c_cflag;
+	unsigned char buf[32];
+	unsigned int modem_signals;
+	int arg, ret;
+	int i = 0;
+	speed_t baud;
+
+	dev_dbg(dev,
+		"digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x\n",
+		priv->dp_port_num, iflag, old_iflag, cflag, old_cflag);
+
+	/* set baud rate */
+	baud = tty_get_baud_rate(tty);
+	if (baud != tty_termios_baud_rate(old_termios)) {
+		arg = -1;
+
+		/* reassert DTR and (maybe) RTS on transition from B0 */
+		if ((old_cflag & CBAUD) == B0) {
+			/* don't set RTS if using hardware flow control */
+			/* and throttling input */
+			modem_signals = TIOCM_DTR;
+			if (!C_CRTSCTS(tty) || !tty_throttled(tty))
+				modem_signals |= TIOCM_RTS;
+			digi_set_modem_signals(port, modem_signals, 1);
+		}
+		switch (baud) {
+		/* drop DTR and RTS on transition to B0 */
+		case 0: digi_set_modem_signals(port, 0, 1); break;
+		case 50: arg = DIGI_BAUD_50; break;
+		case 75: arg = DIGI_BAUD_75; break;
+		case 110: arg = DIGI_BAUD_110; break;
+		case 150: arg = DIGI_BAUD_150; break;
+		case 200: arg = DIGI_BAUD_200; break;
+		case 300: arg = DIGI_BAUD_300; break;
+		case 600: arg = DIGI_BAUD_600; break;
+		case 1200: arg = DIGI_BAUD_1200; break;
+		case 1800: arg = DIGI_BAUD_1800; break;
+		case 2400: arg = DIGI_BAUD_2400; break;
+		case 4800: arg = DIGI_BAUD_4800; break;
+		case 9600: arg = DIGI_BAUD_9600; break;
+		case 19200: arg = DIGI_BAUD_19200; break;
+		case 38400: arg = DIGI_BAUD_38400; break;
+		case 57600: arg = DIGI_BAUD_57600; break;
+		case 115200: arg = DIGI_BAUD_115200; break;
+		case 230400: arg = DIGI_BAUD_230400; break;
+		case 460800: arg = DIGI_BAUD_460800; break;
+		default:
+			arg = DIGI_BAUD_9600;
+			baud = 9600;
+			break;
+		}
+		if (arg != -1) {
+			buf[i++] = DIGI_CMD_SET_BAUD_RATE;
+			buf[i++] = priv->dp_port_num;
+			buf[i++] = arg;
+			buf[i++] = 0;
+		}
+	}
+	/* set parity */
+	tty->termios.c_cflag &= ~CMSPAR;
+
+	if ((cflag & (PARENB | PARODD)) != (old_cflag & (PARENB | PARODD))) {
+		if (cflag & PARENB) {
+			if (cflag & PARODD)
+				arg = DIGI_PARITY_ODD;
+			else
+				arg = DIGI_PARITY_EVEN;
+		} else {
+			arg = DIGI_PARITY_NONE;
+		}
+		buf[i++] = DIGI_CMD_SET_PARITY;
+		buf[i++] = priv->dp_port_num;
+		buf[i++] = arg;
+		buf[i++] = 0;
+	}
+	/* set word size */
+	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
+		arg = -1;
+		switch (cflag & CSIZE) {
+		case CS5: arg = DIGI_WORD_SIZE_5; break;
+		case CS6: arg = DIGI_WORD_SIZE_6; break;
+		case CS7: arg = DIGI_WORD_SIZE_7; break;
+		case CS8: arg = DIGI_WORD_SIZE_8; break;
+		default:
+			dev_dbg(dev,
+				"digi_set_termios: can't handle word size %d\n",
+				cflag & CSIZE);
+			break;
+		}
+
+		if (arg != -1) {
+			buf[i++] = DIGI_CMD_SET_WORD_SIZE;
+			buf[i++] = priv->dp_port_num;
+			buf[i++] = arg;
+			buf[i++] = 0;
+		}
+
+	}
+
+	/* set stop bits */
+	if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
+
+		if ((cflag & CSTOPB))
+			arg = DIGI_STOP_BITS_2;
+		else
+			arg = DIGI_STOP_BITS_1;
+
+		buf[i++] = DIGI_CMD_SET_STOP_BITS;
+		buf[i++] = priv->dp_port_num;
+		buf[i++] = arg;
+		buf[i++] = 0;
+
+	}
+
+	/* set input flow control */
+	if ((iflag & IXOFF) != (old_iflag & IXOFF) ||
+			(cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
+		arg = 0;
+		if (iflag & IXOFF)
+			arg |= DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
+		else
+			arg &= ~DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
+
+		if (cflag & CRTSCTS) {
+			arg |= DIGI_INPUT_FLOW_CONTROL_RTS;
+
+			/* On USB-4 it is necessary to assert RTS prior */
+			/* to selecting RTS input flow control.  */
+			buf[i++] = DIGI_CMD_SET_RTS_SIGNAL;
+			buf[i++] = priv->dp_port_num;
+			buf[i++] = DIGI_RTS_ACTIVE;
+			buf[i++] = 0;
+
+		} else {
+			arg &= ~DIGI_INPUT_FLOW_CONTROL_RTS;
+		}
+		buf[i++] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
+		buf[i++] = priv->dp_port_num;
+		buf[i++] = arg;
+		buf[i++] = 0;
+	}
+
+	/* set output flow control */
+	if ((iflag & IXON) != (old_iflag & IXON) ||
+			(cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
+		arg = 0;
+		if (iflag & IXON)
+			arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
+		else
+			arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
+
+		if (cflag & CRTSCTS)
+			arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS;
+		else
+			arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS;
+
+		buf[i++] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
+		buf[i++] = priv->dp_port_num;
+		buf[i++] = arg;
+		buf[i++] = 0;
+	}
+
+	/* set receive enable/disable */
+	if ((cflag & CREAD) != (old_cflag & CREAD)) {
+		if (cflag & CREAD)
+			arg = DIGI_ENABLE;
+		else
+			arg = DIGI_DISABLE;
+
+		buf[i++] = DIGI_CMD_RECEIVE_ENABLE;
+		buf[i++] = priv->dp_port_num;
+		buf[i++] = arg;
+		buf[i++] = 0;
+	}
+	ret = digi_write_oob_command(port, buf, i, 1);
+	if (ret != 0)
+		dev_dbg(dev, "digi_set_termios: write oob failed, ret=%d\n", ret);
+	tty_encode_baud_rate(tty, baud, baud);
+}
+
+
+static void digi_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned char buf[4];
+
+	buf[0] = DIGI_CMD_BREAK_CONTROL;
+	buf[1] = 2;				/* length */
+	buf[2] = break_state ? 1 : 0;
+	buf[3] = 0;				/* pad */
+	digi_write_inb_command(port, buf, 4, 0);
+}
+
+
+static int digi_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct digi_port *priv = usb_get_serial_port_data(port);
+	unsigned int val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->dp_port_lock, flags);
+	val = priv->dp_modem_signals;
+	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+	return val;
+}
+
+
+static int digi_tiocmset(struct tty_struct *tty,
+					unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct digi_port *priv = usb_get_serial_port_data(port);
+	unsigned int val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->dp_port_lock, flags);
+	val = (priv->dp_modem_signals & ~clear) | set;
+	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+	return digi_set_modem_signals(port, val, 1);
+}
+
+
+static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
+{
+
+	int ret, data_len, new_len;
+	struct digi_port *priv = usb_get_serial_port_data(port);
+	unsigned char *data = port->write_urb->transfer_buffer;
+	unsigned long flags;
+
+	dev_dbg(&port->dev, "digi_write: TOP: port=%d, count=%d\n",
+		priv->dp_port_num, count);
+
+	/* copy user data (which can sleep) before getting spin lock */
+	count = min(count, port->bulk_out_size-2);
+	count = min(64, count);
+
+	/* be sure only one write proceeds at a time */
+	/* there are races on the port private buffer */
+	spin_lock_irqsave(&priv->dp_port_lock, flags);
+
+	/* wait for urb status clear to submit another urb */
+	if (priv->dp_write_urb_in_use) {
+		/* buffer data if count is 1 (probably put_char) if possible */
+		if (count == 1 && priv->dp_out_buf_len < DIGI_OUT_BUF_SIZE) {
+			priv->dp_out_buf[priv->dp_out_buf_len++] = *buf;
+			new_len = 1;
+		} else {
+			new_len = 0;
+		}
+		spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+		return new_len;
+	}
+
+	/* allow space for any buffered data and for new data, up to */
+	/* transfer buffer size - 2 (for command and length bytes) */
+	new_len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
+	data_len = new_len + priv->dp_out_buf_len;
+
+	if (data_len == 0) {
+		spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+		return 0;
+	}
+
+	port->write_urb->transfer_buffer_length = data_len+2;
+
+	*data++ = DIGI_CMD_SEND_DATA;
+	*data++ = data_len;
+
+	/* copy in buffered data first */
+	memcpy(data, priv->dp_out_buf, priv->dp_out_buf_len);
+	data += priv->dp_out_buf_len;
+
+	/* copy in new data */
+	memcpy(data, buf, new_len);
+
+	ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+	if (ret == 0) {
+		priv->dp_write_urb_in_use = 1;
+		ret = new_len;
+		priv->dp_out_buf_len = 0;
+	}
+
+	/* return length of new data written, or error */
+	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+	if (ret < 0)
+		dev_err_console(port,
+			"%s: usb_submit_urb failed, ret=%d, port=%d\n",
+			__func__, ret, priv->dp_port_num);
+	dev_dbg(&port->dev, "digi_write: returning %d\n", ret);
+	return ret;
+
+}
+
+static void digi_write_bulk_callback(struct urb *urb)
+{
+
+	struct usb_serial_port *port = urb->context;
+	struct usb_serial *serial;
+	struct digi_port *priv;
+	struct digi_serial *serial_priv;
+	unsigned long flags;
+	int ret = 0;
+	int status = urb->status;
+	bool wakeup;
+
+	/* port and serial sanity check */
+	if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
+		pr_err("%s: port or port->private is NULL, status=%d\n",
+			__func__, status);
+		return;
+	}
+	serial = port->serial;
+	if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) {
+		dev_err(&port->dev,
+			"%s: serial or serial->private is NULL, status=%d\n",
+			__func__, status);
+		return;
+	}
+
+	/* handle oob callback */
+	if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
+		dev_dbg(&port->dev, "digi_write_bulk_callback: oob callback\n");
+		spin_lock_irqsave(&priv->dp_port_lock, flags);
+		priv->dp_write_urb_in_use = 0;
+		wake_up_interruptible(&priv->write_wait);
+		spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+		return;
+	}
+
+	/* try to send any buffered data on this port */
+	wakeup = true;
+	spin_lock_irqsave(&priv->dp_port_lock, flags);
+	priv->dp_write_urb_in_use = 0;
+	if (priv->dp_out_buf_len > 0) {
+		*((unsigned char *)(port->write_urb->transfer_buffer))
+			= (unsigned char)DIGI_CMD_SEND_DATA;
+		*((unsigned char *)(port->write_urb->transfer_buffer) + 1)
+			= (unsigned char)priv->dp_out_buf_len;
+		port->write_urb->transfer_buffer_length =
+						priv->dp_out_buf_len + 2;
+		memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf,
+			priv->dp_out_buf_len);
+		ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+		if (ret == 0) {
+			priv->dp_write_urb_in_use = 1;
+			priv->dp_out_buf_len = 0;
+			wakeup = false;
+		}
+	}
+	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
+	if (ret && ret != -EPERM)
+		dev_err_console(port,
+			"%s: usb_submit_urb failed, ret=%d, port=%d\n",
+			__func__, ret, priv->dp_port_num);
+
+	if (wakeup)
+		tty_port_tty_wakeup(&port->port);
+}
+
+static unsigned int digi_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct digi_port *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned int room;
+
+	spin_lock_irqsave(&priv->dp_port_lock, flags);
+
+	if (priv->dp_write_urb_in_use)
+		room = 0;
+	else
+		room = port->bulk_out_size - 2 - priv->dp_out_buf_len;
+
+	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+	dev_dbg(&port->dev, "digi_write_room: port=%d, room=%u\n", priv->dp_port_num, room);
+	return room;
+
+}
+
+static unsigned int digi_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct digi_port *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned int chars;
+
+	spin_lock_irqsave(&priv->dp_port_lock, flags);
+	if (priv->dp_write_urb_in_use)
+		chars = port->bulk_out_size - 2;
+	else
+		chars = priv->dp_out_buf_len;
+	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
+	dev_dbg(&port->dev, "%s: port=%d, chars=%d\n", __func__,
+			priv->dp_port_num, chars);
+	return chars;
+}
+
+static void digi_dtr_rts(struct usb_serial_port *port, int on)
+{
+	/* Adjust DTR and RTS */
+	digi_set_modem_signals(port, on * (TIOCM_DTR | TIOCM_RTS), 1);
+}
+
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	int ret;
+	unsigned char buf[32];
+	struct digi_port *priv = usb_get_serial_port_data(port);
+	struct ktermios not_termios;
+
+	/* be sure the device is started up */
+	if (digi_startup_device(port->serial) != 0)
+		return -ENXIO;
+
+	/* read modem signals automatically whenever they change */
+	buf[0] = DIGI_CMD_READ_INPUT_SIGNALS;
+	buf[1] = priv->dp_port_num;
+	buf[2] = DIGI_ENABLE;
+	buf[3] = 0;
+
+	/* flush fifos */
+	buf[4] = DIGI_CMD_IFLUSH_FIFO;
+	buf[5] = priv->dp_port_num;
+	buf[6] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
+	buf[7] = 0;
+
+	ret = digi_write_oob_command(port, buf, 8, 1);
+	if (ret != 0)
+		dev_dbg(&port->dev, "digi_open: write oob failed, ret=%d\n", ret);
+
+	/* set termios settings */
+	if (tty) {
+		not_termios.c_cflag = ~tty->termios.c_cflag;
+		not_termios.c_iflag = ~tty->termios.c_iflag;
+		digi_set_termios(tty, port, &not_termios);
+	}
+	return 0;
+}
+
+
+static void digi_close(struct usb_serial_port *port)
+{
+	DEFINE_WAIT(wait);
+	int ret;
+	unsigned char buf[32];
+	struct digi_port *priv = usb_get_serial_port_data(port);
+
+	mutex_lock(&port->serial->disc_mutex);
+	/* if disconnected, just clear flags */
+	if (port->serial->disconnected)
+		goto exit;
+
+	/* FIXME: Transmit idle belongs in the wait_unti_sent path */
+	digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
+
+	/* disable input flow control */
+	buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
+	buf[1] = priv->dp_port_num;
+	buf[2] = DIGI_DISABLE;
+	buf[3] = 0;
+
+	/* disable output flow control */
+	buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
+	buf[5] = priv->dp_port_num;
+	buf[6] = DIGI_DISABLE;
+	buf[7] = 0;
+
+	/* disable reading modem signals automatically */
+	buf[8] = DIGI_CMD_READ_INPUT_SIGNALS;
+	buf[9] = priv->dp_port_num;
+	buf[10] = DIGI_DISABLE;
+	buf[11] = 0;
+
+	/* disable receive */
+	buf[12] = DIGI_CMD_RECEIVE_ENABLE;
+	buf[13] = priv->dp_port_num;
+	buf[14] = DIGI_DISABLE;
+	buf[15] = 0;
+
+	/* flush fifos */
+	buf[16] = DIGI_CMD_IFLUSH_FIFO;
+	buf[17] = priv->dp_port_num;
+	buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
+	buf[19] = 0;
+
+	ret = digi_write_oob_command(port, buf, 20, 0);
+	if (ret != 0)
+		dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n",
+									ret);
+	/* wait for final commands on oob port to complete */
+	prepare_to_wait(&priv->dp_flush_wait, &wait,
+			TASK_INTERRUPTIBLE);
+	schedule_timeout(DIGI_CLOSE_TIMEOUT);
+	finish_wait(&priv->dp_flush_wait, &wait);
+
+	/* shutdown any outstanding bulk writes */
+	usb_kill_urb(port->write_urb);
+exit:
+	spin_lock_irq(&priv->dp_port_lock);
+	priv->dp_write_urb_in_use = 0;
+	wake_up_interruptible(&priv->dp_close_wait);
+	spin_unlock_irq(&priv->dp_port_lock);
+	mutex_unlock(&port->serial->disc_mutex);
+}
+
+
+/*
+ *  Digi Startup Device
+ *
+ *  Starts reads on all ports.  Must be called AFTER startup, with
+ *  urbs initialized.  Returns 0 if successful, non-zero error otherwise.
+ */
+
+static int digi_startup_device(struct usb_serial *serial)
+{
+	int i, ret = 0;
+	struct digi_serial *serial_priv = usb_get_serial_data(serial);
+	struct usb_serial_port *port;
+
+	/* be sure this happens exactly once */
+	spin_lock(&serial_priv->ds_serial_lock);
+	if (serial_priv->ds_device_started) {
+		spin_unlock(&serial_priv->ds_serial_lock);
+		return 0;
+	}
+	serial_priv->ds_device_started = 1;
+	spin_unlock(&serial_priv->ds_serial_lock);
+
+	/* start reading from each bulk in endpoint for the device */
+	/* set USB_DISABLE_SPD flag for write bulk urbs */
+	for (i = 0; i < serial->type->num_ports + 1; i++) {
+		port = serial->port[i];
+		ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
+		if (ret != 0) {
+			dev_err(&port->dev,
+				"%s: usb_submit_urb failed, ret=%d, port=%d\n",
+				__func__, ret, i);
+			break;
+		}
+	}
+	return ret;
+}
+
+static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
+{
+	struct digi_port *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->dp_port_lock);
+	priv->dp_port_num = port_num;
+	init_waitqueue_head(&priv->dp_transmit_idle_wait);
+	init_waitqueue_head(&priv->dp_flush_wait);
+	init_waitqueue_head(&priv->dp_close_wait);
+	init_waitqueue_head(&priv->write_wait);
+	priv->dp_port = port;
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
+}
+
+static int digi_startup(struct usb_serial *serial)
+{
+	struct digi_serial *serial_priv;
+	int ret;
+
+	serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
+	if (!serial_priv)
+		return -ENOMEM;
+
+	spin_lock_init(&serial_priv->ds_serial_lock);
+	serial_priv->ds_oob_port_num = serial->type->num_ports;
+	serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num];
+
+	ret = digi_port_init(serial_priv->ds_oob_port,
+						serial_priv->ds_oob_port_num);
+	if (ret) {
+		kfree(serial_priv);
+		return ret;
+	}
+
+	usb_set_serial_data(serial, serial_priv);
+
+	return 0;
+}
+
+
+static void digi_disconnect(struct usb_serial *serial)
+{
+	int i;
+
+	/* stop reads and writes on all ports */
+	for (i = 0; i < serial->type->num_ports + 1; i++) {
+		usb_kill_urb(serial->port[i]->read_urb);
+		usb_kill_urb(serial->port[i]->write_urb);
+	}
+}
+
+
+static void digi_release(struct usb_serial *serial)
+{
+	struct digi_serial *serial_priv;
+	struct digi_port *priv;
+
+	serial_priv = usb_get_serial_data(serial);
+
+	priv = usb_get_serial_port_data(serial_priv->ds_oob_port);
+	kfree(priv);
+
+	kfree(serial_priv);
+}
+
+static int digi_port_probe(struct usb_serial_port *port)
+{
+	return digi_port_init(port, port->port_number);
+}
+
+static void digi_port_remove(struct usb_serial_port *port)
+{
+	struct digi_port *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+}
+
+static void digi_read_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct digi_port *priv;
+	struct digi_serial *serial_priv;
+	int ret;
+	int status = urb->status;
+
+	/* port sanity check, do not resubmit if port is not valid */
+	if (port == NULL)
+		return;
+	priv = usb_get_serial_port_data(port);
+	if (priv == NULL) {
+		dev_err(&port->dev, "%s: port->private is NULL, status=%d\n",
+			__func__, status);
+		return;
+	}
+	if (port->serial == NULL ||
+		(serial_priv = usb_get_serial_data(port->serial)) == NULL) {
+		dev_err(&port->dev, "%s: serial is bad or serial->private "
+			"is NULL, status=%d\n", __func__, status);
+		return;
+	}
+
+	/* do not resubmit urb if it has any status error */
+	if (status) {
+		dev_err(&port->dev,
+			"%s: nonzero read bulk status: status=%d, port=%d\n",
+			__func__, status, priv->dp_port_num);
+		return;
+	}
+
+	/* handle oob or inb callback, do not resubmit if error */
+	if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
+		if (digi_read_oob_callback(urb) != 0)
+			return;
+	} else {
+		if (digi_read_inb_callback(urb) != 0)
+			return;
+	}
+
+	/* continue read */
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	if (ret != 0 && ret != -EPERM) {
+		dev_err(&port->dev,
+			"%s: failed resubmitting urb, ret=%d, port=%d\n",
+			__func__, ret, priv->dp_port_num);
+	}
+
+}
+
+/*
+ *  Digi Read INB Callback
+ *
+ *  Digi Read INB Callback handles reads on the in band ports, sending
+ *  the data on to the tty subsystem.  When called we know port and
+ *  port->private are not NULL and port->serial has been validated.
+ *  It returns 0 if successful, 1 if successful but the port is
+ *  throttled, and -1 if the sanity checks failed.
+ */
+
+static int digi_read_inb_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct digi_port *priv = usb_get_serial_port_data(port);
+	unsigned char *buf = urb->transfer_buffer;
+	unsigned long flags;
+	int opcode;
+	int len;
+	int port_status;
+	unsigned char *data;
+	int tty_flag, throttled;
+
+	/* short/multiple packet check */
+	if (urb->actual_length < 2) {
+		dev_warn(&port->dev, "short packet received\n");
+		return -1;
+	}
+
+	opcode = buf[0];
+	len = buf[1];
+
+	if (urb->actual_length != len + 2) {
+		dev_err(&port->dev, "malformed packet received: port=%d, opcode=%d, len=%d, actual_length=%u\n",
+			priv->dp_port_num, opcode, len, urb->actual_length);
+		return -1;
+	}
+
+	if (opcode == DIGI_CMD_RECEIVE_DATA && len < 1) {
+		dev_err(&port->dev, "malformed data packet received\n");
+		return -1;
+	}
+
+	spin_lock_irqsave(&priv->dp_port_lock, flags);
+
+	/* check for throttle; if set, do not resubmit read urb */
+	/* indicate the read chain needs to be restarted on unthrottle */
+	throttled = priv->dp_throttled;
+	if (throttled)
+		priv->dp_throttle_restart = 1;
+
+	/* receive data */
+	if (opcode == DIGI_CMD_RECEIVE_DATA) {
+		port_status = buf[2];
+		data = &buf[3];
+
+		/* get flag from port_status */
+		tty_flag = 0;
+
+		/* overrun is special, not associated with a char */
+		if (port_status & DIGI_OVERRUN_ERROR)
+			tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
+
+		/* break takes precedence over parity, */
+		/* which takes precedence over framing errors */
+		if (port_status & DIGI_BREAK_ERROR)
+			tty_flag = TTY_BREAK;
+		else if (port_status & DIGI_PARITY_ERROR)
+			tty_flag = TTY_PARITY;
+		else if (port_status & DIGI_FRAMING_ERROR)
+			tty_flag = TTY_FRAME;
+
+		/* data length is len-1 (one byte of len is port_status) */
+		--len;
+		if (len > 0) {
+			tty_insert_flip_string_fixed_flag(&port->port, data,
+					tty_flag, len);
+			tty_flip_buffer_push(&port->port);
+		}
+	}
+	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
+	if (opcode == DIGI_CMD_RECEIVE_DISABLE)
+		dev_dbg(&port->dev, "%s: got RECEIVE_DISABLE\n", __func__);
+	else if (opcode != DIGI_CMD_RECEIVE_DATA)
+		dev_dbg(&port->dev, "%s: unknown opcode: %d\n", __func__, opcode);
+
+	return throttled ? 1 : 0;
+
+}
+
+
+/*
+ *  Digi Read OOB Callback
+ *
+ *  Digi Read OOB Callback handles reads on the out of band port.
+ *  When called we know port and port->private are not NULL and
+ *  the port->serial is valid.  It returns 0 if successful, and
+ *  -1 if the sanity checks failed.
+ */
+
+static int digi_read_oob_callback(struct urb *urb)
+{
+
+	struct usb_serial_port *port = urb->context;
+	struct usb_serial *serial = port->serial;
+	struct tty_struct *tty;
+	struct digi_port *priv;
+	unsigned char *buf = urb->transfer_buffer;
+	int opcode, line, status, val;
+	unsigned long flags;
+	int i;
+	unsigned int rts;
+
+	if (urb->actual_length < 4)
+		return -1;
+
+	/* handle each oob command */
+	for (i = 0; i < urb->actual_length - 3; i += 4) {
+		opcode = buf[i];
+		line = buf[i + 1];
+		status = buf[i + 2];
+		val = buf[i + 3];
+
+		dev_dbg(&port->dev, "digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d\n",
+			opcode, line, status, val);
+
+		if (status != 0 || line >= serial->type->num_ports)
+			continue;
+
+		port = serial->port[line];
+
+		priv = usb_get_serial_port_data(port);
+		if (priv == NULL)
+			return -1;
+
+		tty = tty_port_tty_get(&port->port);
+
+		rts = 0;
+		if (tty)
+			rts = C_CRTSCTS(tty);
+
+		if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
+			bool wakeup = false;
+
+			spin_lock_irqsave(&priv->dp_port_lock, flags);
+			/* convert from digi flags to termiox flags */
+			if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
+				priv->dp_modem_signals |= TIOCM_CTS;
+				if (rts)
+					wakeup = true;
+			} else {
+				priv->dp_modem_signals &= ~TIOCM_CTS;
+				/* port must be open to use tty struct */
+			}
+			if (val & DIGI_READ_INPUT_SIGNALS_DSR)
+				priv->dp_modem_signals |= TIOCM_DSR;
+			else
+				priv->dp_modem_signals &= ~TIOCM_DSR;
+			if (val & DIGI_READ_INPUT_SIGNALS_RI)
+				priv->dp_modem_signals |= TIOCM_RI;
+			else
+				priv->dp_modem_signals &= ~TIOCM_RI;
+			if (val & DIGI_READ_INPUT_SIGNALS_DCD)
+				priv->dp_modem_signals |= TIOCM_CD;
+			else
+				priv->dp_modem_signals &= ~TIOCM_CD;
+
+			spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
+			if (wakeup)
+				tty_port_tty_wakeup(&port->port);
+		} else if (opcode == DIGI_CMD_TRANSMIT_IDLE) {
+			spin_lock_irqsave(&priv->dp_port_lock, flags);
+			priv->dp_transmit_idle = 1;
+			wake_up_interruptible(&priv->dp_transmit_idle_wait);
+			spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+		} else if (opcode == DIGI_CMD_IFLUSH_FIFO) {
+			wake_up_interruptible(&priv->dp_flush_wait);
+		}
+		tty_kref_put(tty);
+	}
+	return 0;
+
+}
+
+module_usb_serial_driver(serial_drivers, id_table_combined);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
new file mode 100644
index 000000000..405e835e9
--- /dev/null
+++ b/drivers/usb/serial/empeg.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Empeg empeg-car player driver
+ *
+ *	Copyright (C) 2000, 2001
+ *	    Gary Brubaker (xavyer@ix.netcom.com)
+ *
+ *	Copyright (C) 1999 - 2001
+ *	    Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Gary Brubaker <xavyer@ix.netcom.com>"
+#define DRIVER_DESC "USB Empeg Mark I/II Driver"
+
+#define EMPEG_VENDOR_ID			0x084f
+#define EMPEG_PRODUCT_ID		0x0001
+
+/* function prototypes for an empeg-car player */
+static int  empeg_startup(struct usb_serial *serial);
+static void empeg_init_termios(struct tty_struct *tty);
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) },
+	{ }					/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_serial_driver empeg_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"empeg",
+	},
+	.id_table =		id_table,
+	.num_ports =		1,
+	.bulk_out_size =	256,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+	.attach =		empeg_startup,
+	.init_termios =		empeg_init_termios,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&empeg_device, NULL
+};
+
+static int empeg_startup(struct usb_serial *serial)
+{
+	int r;
+
+	if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
+		dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
+			serial->dev->actconfig->desc.bConfigurationValue);
+		return -ENODEV;
+	}
+
+	r = usb_reset_configuration(serial->dev);
+
+	/* continue on with initialization */
+	return r;
+}
+
+static void empeg_init_termios(struct tty_struct *tty)
+{
+	struct ktermios *termios = &tty->termios;
+
+	/*
+	 * The empeg-car player wants these particular tty settings.
+	 * You could, for example, change the baud rate, however the
+	 * player only supports 115200 (currently), so there is really
+	 * no point in support for changes to the tty settings.
+	 * (at least for now)
+	 *
+	 * The default requirements for this device are:
+	 */
+	termios->c_iflag
+		&= ~(IGNBRK	/* disable ignore break */
+		| BRKINT	/* disable break causes interrupt */
+		| PARMRK	/* disable mark parity errors */
+		| ISTRIP	/* disable clear high bit of input characters */
+		| INLCR		/* disable translate NL to CR */
+		| IGNCR		/* disable ignore CR */
+		| ICRNL		/* disable translate CR to NL */
+		| IXON);	/* disable enable XON/XOFF flow control */
+
+	termios->c_oflag
+		&= ~OPOST;	/* disable postprocess output characters */
+
+	termios->c_lflag
+		&= ~(ECHO	/* disable echo input characters */
+		| ECHONL	/* disable echo new line */
+		| ICANON	/* disable erase, kill, werase, and rprnt special characters */
+		| ISIG		/* disable interrupt, quit, and suspend special characters */
+		| IEXTEN);	/* disable non-POSIX special characters */
+
+	termios->c_cflag
+		&= ~(CSIZE	/* no size */
+		| PARENB	/* disable parity bit */
+		| CBAUD);	/* clear current baud rate */
+
+	termios->c_cflag
+		|= CS8;		/* character size 8 bits */
+
+	tty_encode_baud_rate(tty, 115200, 115200);
+}
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/ezusb_convert.pl b/drivers/usb/serial/ezusb_convert.pl
new file mode 100644
index 000000000..40d23f21e
--- /dev/null
+++ b/drivers/usb/serial/ezusb_convert.pl
@@ -0,0 +1,51 @@
+#! /usr/bin/perl -w
+# SPDX-License-Identifier: GPL-2.0
+
+
+# convert an Intel HEX file into a set of C records usable by the firmware
+# loading code in usb-serial.c (or others)
+
+# accepts the .hex file(s) on stdin, a basename (to name the initialized
+# array) as an argument, and prints the .h file to stdout. Typical usage:
+#  perl ezusb_convert.pl foo <foo.hex >fw_foo.h
+
+
+my $basename = $ARGV[0];
+die "no base name specified" unless $basename;
+
+while (<STDIN>) {
+    # ':' <len> <addr> <type> <len-data> <crc> '\r'
+    #  len, type, crc are 2-char hex, addr is 4-char hex. type is 00 for
+    # normal records, 01 for EOF
+    my($lenstring, $addrstring, $typestring, $reststring, $doscrap) =
+      /^:(\w\w)(\w\w\w\w)(\w\w)(\w+)(\r?)$/;
+    die "malformed line: $_" unless $reststring;
+    last if $typestring eq '01';
+    my($len) = hex($lenstring);
+    my($addr) = hex($addrstring);
+    my(@bytes) = unpack("C*", pack("H".(2*$len), $reststring));
+    #pop(@bytes); # last byte is a CRC
+    push(@records, [$addr, \@bytes]);
+}
+
+@sorted_records = sort { $a->[0] <=> $b->[0] } @records;
+
+print <<"EOF";
+/*
+ * ${basename}_fw.h
+ *
+ * Generated from ${basename}.s by ezusb_convert.pl
+ * This file is presumed to be under the same copyright as the source file
+ * from which it was derived.
+ */
+
+EOF
+
+print "static const struct ezusb_hex_record ${basename}_firmware[] = {\n";
+foreach $r (@sorted_records) {
+    printf("{ 0x%04x,\t%d,\t{", $r->[0], scalar(@{$r->[1]}));
+    print join(", ", map {sprintf('0x%02x', $_);} @{$r->[1]});
+    print "} },\n";
+}
+print "{ 0xffff,\t0,\t{0x00} }\n";
+print "};\n";
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
new file mode 100644
index 000000000..891fb1fe6
--- /dev/null
+++ b/drivers/usb/serial/f81232.c
@@ -0,0 +1,1063 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Fintek F81232 USB to serial adaptor driver
+ * Fintek F81532A/534A/535/536 USB to 2/4/8/12 serial adaptor driver
+ *
+ * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org)
+ * Copyright (C) 2012 Linux Foundation
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial_reg.h>
+
+#define F81232_ID		\
+	{ USB_DEVICE(0x1934, 0x0706) }	/* 1 port UART device */
+
+#define F81534A_SERIES_ID	\
+	{ USB_DEVICE(0x2c42, 0x1602) },	/* In-Box 2 port UART device */	\
+	{ USB_DEVICE(0x2c42, 0x1604) },	/* In-Box 4 port UART device */	\
+	{ USB_DEVICE(0x2c42, 0x1605) },	/* In-Box 8 port UART device */	\
+	{ USB_DEVICE(0x2c42, 0x1606) },	/* In-Box 12 port UART device */ \
+	{ USB_DEVICE(0x2c42, 0x1608) },	/* Non-Flash type */ \
+	{ USB_DEVICE(0x2c42, 0x1632) },	/* 2 port UART device */ \
+	{ USB_DEVICE(0x2c42, 0x1634) },	/* 4 port UART device */ \
+	{ USB_DEVICE(0x2c42, 0x1635) },	/* 8 port UART device */ \
+	{ USB_DEVICE(0x2c42, 0x1636) }	/* 12 port UART device */
+
+#define F81534A_CTRL_ID		\
+	{ USB_DEVICE(0x2c42, 0x16f8) }	/* Global control device */
+
+static const struct usb_device_id f81232_id_table[] = {
+	F81232_ID,
+	{ }					/* Terminating entry */
+};
+
+static const struct usb_device_id f81534a_id_table[] = {
+	F81534A_SERIES_ID,
+	{ }					/* Terminating entry */
+};
+
+static const struct usb_device_id f81534a_ctrl_id_table[] = {
+	F81534A_CTRL_ID,
+	{ }					/* Terminating entry */
+};
+
+static const struct usb_device_id combined_id_table[] = {
+	F81232_ID,
+	F81534A_SERIES_ID,
+	F81534A_CTRL_ID,
+	{ }					/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, combined_id_table);
+
+/* Maximum baudrate for F81232 */
+#define F81232_MAX_BAUDRATE		1500000
+#define F81232_DEF_BAUDRATE		9600
+
+/* USB Control EP parameter */
+#define F81232_REGISTER_REQUEST		0xa0
+#define F81232_GET_REGISTER		0xc0
+#define F81232_SET_REGISTER		0x40
+#define F81534A_ACCESS_REG_RETRY	2
+
+#define SERIAL_BASE_ADDRESS		0x0120
+#define RECEIVE_BUFFER_REGISTER		(0x00 + SERIAL_BASE_ADDRESS)
+#define INTERRUPT_ENABLE_REGISTER	(0x01 + SERIAL_BASE_ADDRESS)
+#define FIFO_CONTROL_REGISTER		(0x02 + SERIAL_BASE_ADDRESS)
+#define LINE_CONTROL_REGISTER		(0x03 + SERIAL_BASE_ADDRESS)
+#define MODEM_CONTROL_REGISTER		(0x04 + SERIAL_BASE_ADDRESS)
+#define LINE_STATUS_REGISTER		(0x05 + SERIAL_BASE_ADDRESS)
+#define MODEM_STATUS_REGISTER		(0x06 + SERIAL_BASE_ADDRESS)
+
+/*
+ * F81232 Clock registers (106h)
+ *
+ * Bit1-0:	Clock source selector
+ *			00: 1.846MHz.
+ *			01: 18.46MHz.
+ *			10: 24MHz.
+ *			11: 14.77MHz.
+ */
+#define F81232_CLK_REGISTER		0x106
+#define F81232_CLK_1_846_MHZ		0
+#define F81232_CLK_18_46_MHZ		BIT(0)
+#define F81232_CLK_24_MHZ		BIT(1)
+#define F81232_CLK_14_77_MHZ		(BIT(1) | BIT(0))
+#define F81232_CLK_MASK			GENMASK(1, 0)
+
+#define F81534A_MODE_REG		0x107
+#define F81534A_TRIGGER_MASK		GENMASK(3, 2)
+#define F81534A_TRIGGER_MULTIPLE_4X	BIT(3)
+#define F81534A_FIFO_128BYTE		(BIT(1) | BIT(0))
+
+/* Serial port self GPIO control, 2bytes [control&output data][input data] */
+#define F81534A_GPIO_REG		0x10e
+#define F81534A_GPIO_MODE2_DIR		BIT(6) /* 1: input, 0: output */
+#define F81534A_GPIO_MODE1_DIR		BIT(5)
+#define F81534A_GPIO_MODE0_DIR		BIT(4)
+#define F81534A_GPIO_MODE2_OUTPUT	BIT(2)
+#define F81534A_GPIO_MODE1_OUTPUT	BIT(1)
+#define F81534A_GPIO_MODE0_OUTPUT	BIT(0)
+
+#define F81534A_CTRL_CMD_ENABLE_PORT	0x116
+
+struct f81232_private {
+	struct mutex lock;
+	u8 modem_control;
+	u8 modem_status;
+	u8 shadow_lcr;
+	speed_t baud_base;
+	struct work_struct lsr_work;
+	struct work_struct interrupt_work;
+	struct usb_serial_port *port;
+};
+
+static u32 const baudrate_table[] = { 115200, 921600, 1152000, 1500000 };
+static u8 const clock_table[] = { F81232_CLK_1_846_MHZ, F81232_CLK_14_77_MHZ,
+				F81232_CLK_18_46_MHZ, F81232_CLK_24_MHZ };
+
+static int calc_baud_divisor(speed_t baudrate, speed_t clockrate)
+{
+	return DIV_ROUND_CLOSEST(clockrate, baudrate);
+}
+
+static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val)
+{
+	int status;
+	struct usb_device *dev = port->serial->dev;
+
+	status = usb_control_msg_recv(dev,
+				      0,
+				      F81232_REGISTER_REQUEST,
+				      F81232_GET_REGISTER,
+				      reg,
+				      0,
+				      val,
+				      sizeof(*val),
+				      USB_CTRL_GET_TIMEOUT,
+				      GFP_KERNEL);
+	if (status) {
+		dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
+		status = usb_translate_errors(status);
+	}
+
+	return status;
+}
+
+static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val)
+{
+	int status;
+	struct usb_device *dev = port->serial->dev;
+
+	status = usb_control_msg_send(dev,
+				      0,
+				      F81232_REGISTER_REQUEST,
+				      F81232_SET_REGISTER,
+				      reg,
+				      0,
+				      &val,
+				      sizeof(val),
+				      USB_CTRL_SET_TIMEOUT,
+				      GFP_KERNEL);
+	if (status) {
+		dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
+		status = usb_translate_errors(status);
+	}
+
+	return status;
+}
+
+static int f81232_set_mask_register(struct usb_serial_port *port, u16 reg,
+					u8 mask, u8 val)
+{
+	int status;
+	u8 tmp;
+
+	status = f81232_get_register(port, reg, &tmp);
+	if (status)
+		return status;
+
+	tmp = (tmp & ~mask) | (val & mask);
+
+	return f81232_set_register(port, reg, tmp);
+}
+
+static void f81232_read_msr(struct usb_serial_port *port)
+{
+	int status;
+	u8 current_msr;
+	struct tty_struct *tty;
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+
+	mutex_lock(&priv->lock);
+	status = f81232_get_register(port, MODEM_STATUS_REGISTER,
+			&current_msr);
+	if (status) {
+		dev_err(&port->dev, "%s fail, status: %d\n", __func__, status);
+		mutex_unlock(&priv->lock);
+		return;
+	}
+
+	if (!(current_msr & UART_MSR_ANY_DELTA)) {
+		mutex_unlock(&priv->lock);
+		return;
+	}
+
+	priv->modem_status = current_msr;
+
+	if (current_msr & UART_MSR_DCTS)
+		port->icount.cts++;
+	if (current_msr & UART_MSR_DDSR)
+		port->icount.dsr++;
+	if (current_msr & UART_MSR_TERI)
+		port->icount.rng++;
+	if (current_msr & UART_MSR_DDCD) {
+		port->icount.dcd++;
+		tty = tty_port_tty_get(&port->port);
+		if (tty) {
+			usb_serial_handle_dcd_change(port, tty,
+					current_msr & UART_MSR_DCD);
+
+			tty_kref_put(tty);
+		}
+	}
+
+	wake_up_interruptible(&port->port.delta_msr_wait);
+	mutex_unlock(&priv->lock);
+}
+
+static int f81232_set_mctrl(struct usb_serial_port *port,
+					   unsigned int set, unsigned int clear)
+{
+	u8 val;
+	int status;
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+
+	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0)
+		return 0;	/* no change */
+
+	/* 'set' takes precedence over 'clear' */
+	clear &= ~set;
+
+	/* force enable interrupt with OUT2 */
+	mutex_lock(&priv->lock);
+	val = UART_MCR_OUT2 | priv->modem_control;
+
+	if (clear & TIOCM_DTR)
+		val &= ~UART_MCR_DTR;
+
+	if (clear & TIOCM_RTS)
+		val &= ~UART_MCR_RTS;
+
+	if (set & TIOCM_DTR)
+		val |= UART_MCR_DTR;
+
+	if (set & TIOCM_RTS)
+		val |= UART_MCR_RTS;
+
+	dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__,
+			val, priv->modem_control);
+
+	status = f81232_set_register(port, MODEM_CONTROL_REGISTER, val);
+	if (status) {
+		dev_err(&port->dev, "%s set MCR status < 0\n", __func__);
+		mutex_unlock(&priv->lock);
+		return status;
+	}
+
+	priv->modem_control = val;
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
+static void f81232_update_line_status(struct usb_serial_port *port,
+				      unsigned char *data,
+				      size_t actual_length)
+{
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+
+	if (!actual_length)
+		return;
+
+	switch (data[0] & 0x07) {
+	case 0x00: /* msr change */
+		dev_dbg(&port->dev, "IIR: MSR Change: %02x\n", data[0]);
+		schedule_work(&priv->interrupt_work);
+		break;
+	case 0x02: /* tx-empty */
+		break;
+	case 0x04: /* rx data available */
+		break;
+	case 0x06: /* lsr change */
+		/* we can forget it. the LSR will read from bulk-in */
+		dev_dbg(&port->dev, "IIR: LSR Change: %02x\n", data[0]);
+		break;
+	}
+}
+
+static void f81232_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port =  urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	unsigned int actual_length = urb->actual_length;
+	int status = urb->status;
+	int retval;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
+		return;
+	default:
+		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
+		goto exit;
+	}
+
+	usb_serial_debug_data(&port->dev, __func__,
+			      urb->actual_length, urb->transfer_buffer);
+
+	f81232_update_line_status(port, data, actual_length);
+
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&urb->dev->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
+}
+
+static char f81232_handle_lsr(struct usb_serial_port *port, u8 lsr)
+{
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+	char tty_flag = TTY_NORMAL;
+
+	if (!(lsr & UART_LSR_BRK_ERROR_BITS))
+		return tty_flag;
+
+	if (lsr & UART_LSR_BI) {
+		tty_flag = TTY_BREAK;
+		port->icount.brk++;
+		usb_serial_handle_break(port);
+	} else if (lsr & UART_LSR_PE) {
+		tty_flag = TTY_PARITY;
+		port->icount.parity++;
+	} else if (lsr & UART_LSR_FE) {
+		tty_flag = TTY_FRAME;
+		port->icount.frame++;
+	}
+
+	if (lsr & UART_LSR_OE) {
+		port->icount.overrun++;
+		schedule_work(&priv->lsr_work);
+		tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
+	}
+
+	return tty_flag;
+}
+
+static void f81232_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	char tty_flag;
+	unsigned int i;
+	u8 lsr;
+
+	/*
+	 * When opening the port we get a 1-byte packet with the current LSR,
+	 * which we discard.
+	 */
+	if ((urb->actual_length < 2) || (urb->actual_length % 2))
+		return;
+
+	/* bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... */
+
+	for (i = 0; i < urb->actual_length; i += 2) {
+		lsr = data[i];
+		tty_flag = f81232_handle_lsr(port, lsr);
+
+		if (port->sysrq) {
+			if (usb_serial_handle_sysrq_char(port, data[i + 1]))
+				continue;
+		}
+
+		tty_insert_flip_char(&port->port, data[i + 1], tty_flag);
+	}
+
+	tty_flip_buffer_push(&port->port);
+}
+
+static void f81534a_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	char tty_flag;
+	unsigned int i;
+	u8 lsr;
+	u8 len;
+
+	if (urb->actual_length < 3) {
+		dev_err(&port->dev, "short message received: %d\n",
+				urb->actual_length);
+		return;
+	}
+
+	len = data[0];
+	if (len != urb->actual_length) {
+		dev_err(&port->dev, "malformed message received: %d (%d)\n",
+				urb->actual_length, len);
+		return;
+	}
+
+	/* bulk-in data: [LEN][Data.....][LSR] */
+	lsr = data[len - 1];
+	tty_flag = f81232_handle_lsr(port, lsr);
+
+	if (port->sysrq) {
+		for (i = 1; i < len - 1; ++i) {
+			if (!usb_serial_handle_sysrq_char(port, data[i])) {
+				tty_insert_flip_char(&port->port, data[i],
+						tty_flag);
+			}
+		}
+	} else {
+		tty_insert_flip_string_fixed_flag(&port->port, &data[1],
+							tty_flag, len - 2);
+	}
+
+	tty_flip_buffer_push(&port->port);
+}
+
+static void f81232_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+	int status;
+
+	mutex_lock(&priv->lock);
+
+	if (break_state)
+		priv->shadow_lcr |= UART_LCR_SBC;
+	else
+		priv->shadow_lcr &= ~UART_LCR_SBC;
+
+	status = f81232_set_register(port, LINE_CONTROL_REGISTER,
+					priv->shadow_lcr);
+	if (status)
+		dev_err(&port->dev, "set break failed: %d\n", status);
+
+	mutex_unlock(&priv->lock);
+}
+
+static int f81232_find_clk(speed_t baudrate)
+{
+	int idx;
+
+	for (idx = 0; idx < ARRAY_SIZE(baudrate_table); ++idx) {
+		if (baudrate <= baudrate_table[idx] &&
+				baudrate_table[idx] % baudrate == 0)
+			return idx;
+	}
+
+	return -EINVAL;
+}
+
+static void f81232_set_baudrate(struct tty_struct *tty,
+				struct usb_serial_port *port, speed_t baudrate,
+				speed_t old_baudrate)
+{
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+	u8 lcr;
+	int divisor;
+	int status = 0;
+	int i;
+	int idx;
+	speed_t baud_list[] = { baudrate, old_baudrate, F81232_DEF_BAUDRATE };
+
+	for (i = 0; i < ARRAY_SIZE(baud_list); ++i) {
+		baudrate = baud_list[i];
+		if (baudrate == 0) {
+			tty_encode_baud_rate(tty, 0, 0);
+			return;
+		}
+
+		idx = f81232_find_clk(baudrate);
+		if (idx >= 0) {
+			tty_encode_baud_rate(tty, baudrate, baudrate);
+			break;
+		}
+	}
+
+	if (idx < 0)
+		return;
+
+	priv->baud_base = baudrate_table[idx];
+	divisor = calc_baud_divisor(baudrate, priv->baud_base);
+
+	status = f81232_set_mask_register(port, F81232_CLK_REGISTER,
+			F81232_CLK_MASK, clock_table[idx]);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set CLK_REG: %d\n",
+			__func__, status);
+		return;
+	}
+
+	status = f81232_get_register(port, LINE_CONTROL_REGISTER,
+			 &lcr); /* get LCR */
+	if (status) {
+		dev_err(&port->dev, "%s failed to get LCR: %d\n",
+			__func__, status);
+		return;
+	}
+
+	status = f81232_set_register(port, LINE_CONTROL_REGISTER,
+			 lcr | UART_LCR_DLAB); /* Enable DLAB */
+	if (status) {
+		dev_err(&port->dev, "%s failed to set DLAB: %d\n",
+			__func__, status);
+		return;
+	}
+
+	status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER,
+			 divisor & 0x00ff); /* low */
+	if (status) {
+		dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n",
+			__func__, status);
+		goto reapply_lcr;
+	}
+
+	status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
+			 (divisor & 0xff00) >> 8); /* high */
+	if (status) {
+		dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n",
+			__func__, status);
+	}
+
+reapply_lcr:
+	status = f81232_set_register(port, LINE_CONTROL_REGISTER,
+			lcr & ~UART_LCR_DLAB);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set DLAB: %d\n",
+			__func__, status);
+	}
+}
+
+static int f81232_port_enable(struct usb_serial_port *port)
+{
+	u8 val;
+	int status;
+
+	/* fifo on, trigger8, clear TX/RX*/
+	val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+			UART_FCR_CLEAR_XMIT;
+
+	status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set FCR: %d\n",
+			__func__, status);
+		return status;
+	}
+
+	/* MSR Interrupt only, LSR will read from Bulk-in odd byte */
+	status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
+			UART_IER_MSI);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set IER: %d\n",
+			__func__, status);
+		return status;
+	}
+
+	return 0;
+}
+
+static int f81232_port_disable(struct usb_serial_port *port)
+{
+	int status;
+
+	status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set IER: %d\n",
+			__func__, status);
+		return status;
+	}
+
+	return 0;
+}
+
+static void f81232_set_termios(struct tty_struct *tty,
+			       struct usb_serial_port *port,
+			       const struct ktermios *old_termios)
+{
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+	u8 new_lcr = 0;
+	int status = 0;
+	speed_t baudrate;
+	speed_t old_baud;
+
+	/* Don't change anything if nothing has changed */
+	if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
+		return;
+
+	if (C_BAUD(tty) == B0)
+		f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
+	else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+		f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
+
+	baudrate = tty_get_baud_rate(tty);
+	if (baudrate > 0) {
+		if (old_termios)
+			old_baud = tty_termios_baud_rate(old_termios);
+		else
+			old_baud = F81232_DEF_BAUDRATE;
+
+		f81232_set_baudrate(tty, port, baudrate, old_baud);
+	}
+
+	if (C_PARENB(tty)) {
+		new_lcr |= UART_LCR_PARITY;
+
+		if (!C_PARODD(tty))
+			new_lcr |= UART_LCR_EPAR;
+
+		if (C_CMSPAR(tty))
+			new_lcr |= UART_LCR_SPAR;
+	}
+
+	if (C_CSTOPB(tty))
+		new_lcr |= UART_LCR_STOP;
+
+	new_lcr |= UART_LCR_WLEN(tty_get_char_size(tty->termios.c_cflag));
+
+	mutex_lock(&priv->lock);
+
+	new_lcr |= (priv->shadow_lcr & UART_LCR_SBC);
+	status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set LCR: %d\n",
+			__func__, status);
+	}
+
+	priv->shadow_lcr = new_lcr;
+
+	mutex_unlock(&priv->lock);
+}
+
+static int f81232_tiocmget(struct tty_struct *tty)
+{
+	int r;
+	struct usb_serial_port *port = tty->driver_data;
+	struct f81232_private *port_priv = usb_get_serial_port_data(port);
+	u8 mcr, msr;
+
+	/* force get current MSR changed state */
+	f81232_read_msr(port);
+
+	mutex_lock(&port_priv->lock);
+	mcr = port_priv->modem_control;
+	msr = port_priv->modem_status;
+	mutex_unlock(&port_priv->lock);
+
+	r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
+		(mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
+		(msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
+		(msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
+		(msr & UART_MSR_RI ? TIOCM_RI : 0) |
+		(msr & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+	return r;
+}
+
+static int f81232_tiocmset(struct tty_struct *tty,
+			unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	return f81232_set_mctrl(port, set, clear);
+}
+
+static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	int result;
+
+	result = f81232_port_enable(port);
+	if (result)
+		return result;
+
+	/* Setup termios */
+	if (tty)
+		f81232_set_termios(tty, port, NULL);
+
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (result) {
+		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
+			" error %d\n", __func__, result);
+		return result;
+	}
+
+	result = usb_serial_generic_open(tty, port);
+	if (result) {
+		usb_kill_urb(port->interrupt_in_urb);
+		return result;
+	}
+
+	return 0;
+}
+
+static int f81534a_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	int status;
+	u8 mask;
+	u8 val;
+
+	val = F81534A_TRIGGER_MULTIPLE_4X | F81534A_FIFO_128BYTE;
+	mask = F81534A_TRIGGER_MASK | F81534A_FIFO_128BYTE;
+
+	status = f81232_set_mask_register(port, F81534A_MODE_REG, mask, val);
+	if (status) {
+		dev_err(&port->dev, "failed to set MODE_REG: %d\n", status);
+		return status;
+	}
+
+	return f81232_open(tty, port);
+}
+
+static void f81232_close(struct usb_serial_port *port)
+{
+	struct f81232_private *port_priv = usb_get_serial_port_data(port);
+
+	f81232_port_disable(port);
+	usb_serial_generic_close(port);
+	usb_kill_urb(port->interrupt_in_urb);
+	flush_work(&port_priv->interrupt_work);
+	flush_work(&port_priv->lsr_work);
+}
+
+static void f81232_dtr_rts(struct usb_serial_port *port, int on)
+{
+	if (on)
+		f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
+	else
+		f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
+}
+
+static bool f81232_tx_empty(struct usb_serial_port *port)
+{
+	int status;
+	u8 tmp;
+
+	status = f81232_get_register(port, LINE_STATUS_REGISTER, &tmp);
+	if (!status) {
+		if ((tmp & UART_LSR_TEMT) != UART_LSR_TEMT)
+			return false;
+	}
+
+	return true;
+}
+
+static int f81232_carrier_raised(struct usb_serial_port *port)
+{
+	u8 msr;
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+
+	mutex_lock(&priv->lock);
+	msr = priv->modem_status;
+	mutex_unlock(&priv->lock);
+
+	if (msr & UART_MSR_DCD)
+		return 1;
+	return 0;
+}
+
+static void f81232_get_serial(struct tty_struct *tty, struct serial_struct *ss)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+
+	ss->baud_base = priv->baud_base;
+}
+
+static void  f81232_interrupt_work(struct work_struct *work)
+{
+	struct f81232_private *priv =
+		container_of(work, struct f81232_private, interrupt_work);
+
+	f81232_read_msr(priv->port);
+}
+
+static void f81232_lsr_worker(struct work_struct *work)
+{
+	struct f81232_private *priv;
+	struct usb_serial_port *port;
+	int status;
+	u8 tmp;
+
+	priv = container_of(work, struct f81232_private, lsr_work);
+	port = priv->port;
+
+	status = f81232_get_register(port, LINE_STATUS_REGISTER, &tmp);
+	if (status)
+		dev_warn(&port->dev, "read LSR failed: %d\n", status);
+}
+
+static int f81534a_ctrl_set_register(struct usb_interface *intf, u16 reg,
+					u16 size, void *val)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	int retry = F81534A_ACCESS_REG_RETRY;
+	int status;
+
+	while (retry--) {
+		status = usb_control_msg_send(dev,
+					      0,
+					      F81232_REGISTER_REQUEST,
+					      F81232_SET_REGISTER,
+					      reg,
+					      0,
+					      val,
+					      size,
+					      USB_CTRL_SET_TIMEOUT,
+					      GFP_KERNEL);
+		if (status) {
+			status = usb_translate_errors(status);
+			if (status == -EIO)
+				continue;
+		}
+
+		break;
+	}
+
+	if (status) {
+		dev_err(&intf->dev, "failed to set register 0x%x: %d\n",
+				reg, status);
+	}
+
+	return status;
+}
+
+static int f81534a_ctrl_enable_all_ports(struct usb_interface *intf, bool en)
+{
+	unsigned char enable[2] = {0};
+	int status;
+
+	/*
+	 * Enable all available serial ports, define as following:
+	 * bit 15	: Reset behavior (when HUB got soft reset)
+	 *			0: maintain all serial port enabled state.
+	 *			1: disable all serial port.
+	 * bit 0~11	: Serial port enable bit.
+	 */
+	if (en) {
+		enable[0] = 0xff;
+		enable[1] = 0x8f;
+	}
+
+	status = f81534a_ctrl_set_register(intf, F81534A_CTRL_CMD_ENABLE_PORT,
+			sizeof(enable), enable);
+	if (status)
+		dev_err(&intf->dev, "failed to enable ports: %d\n", status);
+
+	return status;
+}
+
+static int f81534a_ctrl_probe(struct usb_interface *intf,
+				const struct usb_device_id *id)
+{
+	return f81534a_ctrl_enable_all_ports(intf, true);
+}
+
+static void f81534a_ctrl_disconnect(struct usb_interface *intf)
+{
+	f81534a_ctrl_enable_all_ports(intf, false);
+}
+
+static int f81534a_ctrl_resume(struct usb_interface *intf)
+{
+	return f81534a_ctrl_enable_all_ports(intf, true);
+}
+
+static int f81232_port_probe(struct usb_serial_port *port)
+{
+	struct f81232_private *priv;
+
+	priv = devm_kzalloc(&port->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_init(&priv->lock);
+	INIT_WORK(&priv->interrupt_work,  f81232_interrupt_work);
+	INIT_WORK(&priv->lsr_work, f81232_lsr_worker);
+
+	usb_set_serial_port_data(port, priv);
+
+	priv->port = port;
+
+	return 0;
+}
+
+static int f81534a_port_probe(struct usb_serial_port *port)
+{
+	int status;
+
+	/* tri-state with pull-high, default RS232 Mode */
+	status = f81232_set_register(port, F81534A_GPIO_REG,
+					F81534A_GPIO_MODE2_DIR);
+	if (status)
+		return status;
+
+	return f81232_port_probe(port);
+}
+
+static int f81232_suspend(struct usb_serial *serial, pm_message_t message)
+{
+	struct usb_serial_port *port = serial->port[0];
+	struct f81232_private *port_priv = usb_get_serial_port_data(port);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
+		usb_kill_urb(port->read_urbs[i]);
+
+	usb_kill_urb(port->interrupt_in_urb);
+
+	if (port_priv) {
+		flush_work(&port_priv->interrupt_work);
+		flush_work(&port_priv->lsr_work);
+	}
+
+	return 0;
+}
+
+static int f81232_resume(struct usb_serial *serial)
+{
+	struct usb_serial_port *port = serial->port[0];
+	int result;
+
+	if (tty_port_initialized(&port->port)) {
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
+		if (result) {
+			dev_err(&port->dev, "submit interrupt urb failed: %d\n",
+					result);
+			return result;
+		}
+	}
+
+	return usb_serial_generic_resume(serial);
+}
+
+static struct usb_serial_driver f81232_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"f81232",
+	},
+	.id_table =		f81232_id_table,
+	.num_ports =		1,
+	.bulk_in_size =		256,
+	.bulk_out_size =	256,
+	.open =			f81232_open,
+	.close =		f81232_close,
+	.dtr_rts =		f81232_dtr_rts,
+	.carrier_raised =	f81232_carrier_raised,
+	.get_serial =		f81232_get_serial,
+	.break_ctl =		f81232_break_ctl,
+	.set_termios =		f81232_set_termios,
+	.tiocmget =		f81232_tiocmget,
+	.tiocmset =		f81232_tiocmset,
+	.tiocmiwait =		usb_serial_generic_tiocmiwait,
+	.tx_empty =		f81232_tx_empty,
+	.process_read_urb =	f81232_process_read_urb,
+	.read_int_callback =	f81232_read_int_callback,
+	.port_probe =		f81232_port_probe,
+	.suspend =		f81232_suspend,
+	.resume =		f81232_resume,
+};
+
+static struct usb_serial_driver f81534a_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"f81534a",
+	},
+	.id_table =		f81534a_id_table,
+	.num_ports =		1,
+	.open =			f81534a_open,
+	.close =		f81232_close,
+	.dtr_rts =		f81232_dtr_rts,
+	.carrier_raised =	f81232_carrier_raised,
+	.get_serial =		f81232_get_serial,
+	.break_ctl =		f81232_break_ctl,
+	.set_termios =		f81232_set_termios,
+	.tiocmget =		f81232_tiocmget,
+	.tiocmset =		f81232_tiocmset,
+	.tiocmiwait =		usb_serial_generic_tiocmiwait,
+	.tx_empty =		f81232_tx_empty,
+	.process_read_urb =	f81534a_process_read_urb,
+	.read_int_callback =	f81232_read_int_callback,
+	.port_probe =		f81534a_port_probe,
+	.suspend =		f81232_suspend,
+	.resume =		f81232_resume,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&f81232_device,
+	&f81534a_device,
+	NULL,
+};
+
+static struct usb_driver f81534a_ctrl_driver = {
+	.name =		"f81534a_ctrl",
+	.id_table =	f81534a_ctrl_id_table,
+	.probe =	f81534a_ctrl_probe,
+	.disconnect =	f81534a_ctrl_disconnect,
+	.resume =	f81534a_ctrl_resume,
+};
+
+static int __init f81232_init(void)
+{
+	int status;
+
+	status = usb_register_driver(&f81534a_ctrl_driver, THIS_MODULE,
+			KBUILD_MODNAME);
+	if (status)
+		return status;
+
+	status = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME,
+			combined_id_table);
+	if (status) {
+		usb_deregister(&f81534a_ctrl_driver);
+		return status;
+	}
+
+	return 0;
+}
+
+static void __exit f81232_exit(void)
+{
+	usb_serial_deregister_drivers(serial_drivers);
+	usb_deregister(&f81534a_ctrl_driver);
+}
+
+module_init(f81232_init);
+module_exit(f81232_exit);
+
+MODULE_DESCRIPTION("Fintek F81232/532A/534A/535/536 USB to serial driver");
+MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>");
+MODULE_AUTHOR("Peter Hong <peter_hong@fintek.com.tw>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c
new file mode 100644
index 000000000..4083ae961
--- /dev/null
+++ b/drivers/usb/serial/f81534.c
@@ -0,0 +1,1574 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * F81532/F81534 USB to Serial Ports Bridge
+ *
+ * F81532 => 2 Serial Ports
+ * F81534 => 4 Serial Ports
+ *
+ * Copyright (C) 2016 Feature Integration Technology Inc., (Fintek)
+ * Copyright (C) 2016 Tom Tsai (Tom_Tsai@fintek.com.tw)
+ * Copyright (C) 2016 Peter Hong (Peter_Hong@fintek.com.tw)
+ *
+ * The F81532/F81534 had 1 control endpoint for setting, 1 endpoint bulk-out
+ * for all serial port TX and 1 endpoint bulk-in for all serial port read in
+ * (Read Data/MSR/LSR).
+ *
+ * Write URB is fixed with 512bytes, per serial port used 128Bytes.
+ * It can be described by f81534_prepare_write_buffer()
+ *
+ * Read URB is 512Bytes max, per serial port used 128Bytes.
+ * It can be described by f81534_process_read_urb() and maybe received with
+ * 128x1,2,3,4 bytes.
+ *
+ */
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+
+/* Serial Port register Address */
+#define F81534_UART_BASE_ADDRESS	0x1200
+#define F81534_UART_OFFSET		0x10
+#define F81534_DIVISOR_LSB_REG		(0x00 + F81534_UART_BASE_ADDRESS)
+#define F81534_DIVISOR_MSB_REG		(0x01 + F81534_UART_BASE_ADDRESS)
+#define F81534_INTERRUPT_ENABLE_REG	(0x01 + F81534_UART_BASE_ADDRESS)
+#define F81534_FIFO_CONTROL_REG		(0x02 + F81534_UART_BASE_ADDRESS)
+#define F81534_LINE_CONTROL_REG		(0x03 + F81534_UART_BASE_ADDRESS)
+#define F81534_MODEM_CONTROL_REG	(0x04 + F81534_UART_BASE_ADDRESS)
+#define F81534_LINE_STATUS_REG		(0x05 + F81534_UART_BASE_ADDRESS)
+#define F81534_MODEM_STATUS_REG		(0x06 + F81534_UART_BASE_ADDRESS)
+#define F81534_CLOCK_REG		(0x08 + F81534_UART_BASE_ADDRESS)
+#define F81534_CONFIG1_REG		(0x09 + F81534_UART_BASE_ADDRESS)
+
+#define F81534_DEF_CONF_ADDRESS_START	0x3000
+#define F81534_DEF_CONF_SIZE		12
+
+#define F81534_CUSTOM_ADDRESS_START	0x2f00
+#define F81534_CUSTOM_DATA_SIZE		0x10
+#define F81534_CUSTOM_NO_CUSTOM_DATA	0xff
+#define F81534_CUSTOM_VALID_TOKEN	0xf0
+#define F81534_CONF_OFFSET		1
+#define F81534_CONF_INIT_GPIO_OFFSET	4
+#define F81534_CONF_WORK_GPIO_OFFSET	8
+#define F81534_CONF_GPIO_SHUTDOWN	7
+#define F81534_CONF_GPIO_RS232		1
+
+#define F81534_MAX_DATA_BLOCK		64
+#define F81534_MAX_BUS_RETRY		20
+
+/* Default URB timeout for USB operations */
+#define F81534_USB_MAX_RETRY		10
+#define F81534_USB_TIMEOUT		2000
+#define F81534_SET_GET_REGISTER		0xA0
+
+#define F81534_NUM_PORT			4
+#define F81534_UNUSED_PORT		0xff
+#define F81534_WRITE_BUFFER_SIZE	512
+
+#define DRIVER_DESC			"Fintek F81532/F81534"
+#define FINTEK_VENDOR_ID_1		0x1934
+#define FINTEK_VENDOR_ID_2		0x2C42
+#define FINTEK_DEVICE_ID		0x1202
+#define F81534_MAX_TX_SIZE		124
+#define F81534_MAX_RX_SIZE		124
+#define F81534_RECEIVE_BLOCK_SIZE	128
+#define F81534_MAX_RECEIVE_BLOCK_SIZE	512
+
+#define F81534_TOKEN_RECEIVE		0x01
+#define F81534_TOKEN_WRITE		0x02
+#define F81534_TOKEN_TX_EMPTY		0x03
+#define F81534_TOKEN_MSR_CHANGE		0x04
+
+/*
+ * We used interal SPI bus to access FLASH section. We must wait the SPI bus to
+ * idle if we performed any command.
+ *
+ * SPI Bus status register: F81534_BUS_REG_STATUS
+ *	Bit 0/1	: BUSY
+ *	Bit 2	: IDLE
+ */
+#define F81534_BUS_BUSY			(BIT(0) | BIT(1))
+#define F81534_BUS_IDLE			BIT(2)
+#define F81534_BUS_READ_DATA		0x1004
+#define F81534_BUS_REG_STATUS		0x1003
+#define F81534_BUS_REG_START		0x1002
+#define F81534_BUS_REG_END		0x1001
+
+#define F81534_CMD_READ			0x03
+
+#define F81534_DEFAULT_BAUD_RATE	9600
+
+#define F81534_PORT_CONF_RS232		0
+#define F81534_PORT_CONF_RS485		BIT(0)
+#define F81534_PORT_CONF_RS485_INVERT	(BIT(0) | BIT(1))
+#define F81534_PORT_CONF_MODE_MASK	GENMASK(1, 0)
+#define F81534_PORT_CONF_DISABLE_PORT	BIT(3)
+#define F81534_PORT_CONF_NOT_EXIST_PORT	BIT(7)
+#define F81534_PORT_UNAVAILABLE		\
+	(F81534_PORT_CONF_DISABLE_PORT | F81534_PORT_CONF_NOT_EXIST_PORT)
+
+
+#define F81534_1X_RXTRIGGER		0xc3
+#define F81534_8X_RXTRIGGER		0xcf
+
+/*
+ * F81532/534 Clock registers (offset +08h)
+ *
+ * Bit0:	UART Enable (always on)
+ * Bit2-1:	Clock source selector
+ *			00: 1.846MHz.
+ *			01: 18.46MHz.
+ *			10: 24MHz.
+ *			11: 14.77MHz.
+ * Bit4:	Auto direction(RTS) control (RTS pin Low when TX)
+ * Bit5:	Invert direction(RTS) when Bit4 enabled (RTS pin high when TX)
+ */
+
+#define F81534_UART_EN			BIT(0)
+#define F81534_CLK_1_846_MHZ		0
+#define F81534_CLK_18_46_MHZ		BIT(1)
+#define F81534_CLK_24_MHZ		BIT(2)
+#define F81534_CLK_14_77_MHZ		(BIT(1) | BIT(2))
+#define F81534_CLK_MASK			GENMASK(2, 1)
+#define F81534_CLK_TX_DELAY_1BIT	BIT(3)
+#define F81534_CLK_RS485_MODE		BIT(4)
+#define F81534_CLK_RS485_INVERT		BIT(5)
+
+static const struct usb_device_id f81534_id_table[] = {
+	{ USB_DEVICE(FINTEK_VENDOR_ID_1, FINTEK_DEVICE_ID) },
+	{ USB_DEVICE(FINTEK_VENDOR_ID_2, FINTEK_DEVICE_ID) },
+	{}			/* Terminating entry */
+};
+
+#define F81534_TX_EMPTY_BIT		0
+
+struct f81534_serial_private {
+	u8 conf_data[F81534_DEF_CONF_SIZE];
+	int tty_idx[F81534_NUM_PORT];
+	u8 setting_idx;
+	int opened_port;
+	struct mutex urb_mutex;
+};
+
+struct f81534_port_private {
+	struct mutex mcr_mutex;
+	struct mutex lcr_mutex;
+	struct work_struct lsr_work;
+	struct usb_serial_port *port;
+	unsigned long tx_empty;
+	spinlock_t msr_lock;
+	u32 baud_base;
+	u8 shadow_mcr;
+	u8 shadow_lcr;
+	u8 shadow_msr;
+	u8 shadow_clk;
+	u8 phy_num;
+};
+
+struct f81534_pin_data {
+	const u16 reg_addr;
+	const u8 reg_mask;
+};
+
+struct f81534_port_out_pin {
+	struct f81534_pin_data pin[3];
+};
+
+/* Pin output value for M2/M1/M0(SD) */
+static const struct f81534_port_out_pin f81534_port_out_pins[] = {
+	 { { { 0x2ae8, BIT(7) }, { 0x2a90, BIT(5) }, { 0x2a90, BIT(4) } } },
+	 { { { 0x2ae8, BIT(6) }, { 0x2ae8, BIT(0) }, { 0x2ae8, BIT(3) } } },
+	 { { { 0x2a90, BIT(0) }, { 0x2ae8, BIT(2) }, { 0x2a80, BIT(6) } } },
+	 { { { 0x2a90, BIT(3) }, { 0x2a90, BIT(2) }, { 0x2a90, BIT(1) } } },
+};
+
+static u32 const baudrate_table[] = { 115200, 921600, 1152000, 1500000 };
+static u8 const clock_table[] = { F81534_CLK_1_846_MHZ, F81534_CLK_14_77_MHZ,
+				F81534_CLK_18_46_MHZ, F81534_CLK_24_MHZ };
+
+static int f81534_logic_to_phy_port(struct usb_serial *serial,
+					struct usb_serial_port *port)
+{
+	struct f81534_serial_private *serial_priv =
+			usb_get_serial_data(port->serial);
+	int count = 0;
+	int i;
+
+	for (i = 0; i < F81534_NUM_PORT; ++i) {
+		if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE)
+			continue;
+
+		if (port->port_number == count)
+			return i;
+
+		++count;
+	}
+
+	return -ENODEV;
+}
+
+static int f81534_set_register(struct usb_serial *serial, u16 reg, u8 data)
+{
+	struct usb_interface *interface = serial->interface;
+	struct usb_device *dev = serial->dev;
+	size_t count = F81534_USB_MAX_RETRY;
+	int status;
+	u8 *tmp;
+
+	tmp = kmalloc(sizeof(u8), GFP_KERNEL);
+	if (!tmp)
+		return -ENOMEM;
+
+	*tmp = data;
+
+	/*
+	 * Our device maybe not reply when heavily loading, We'll retry for
+	 * F81534_USB_MAX_RETRY times.
+	 */
+	while (count--) {
+		status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+					 F81534_SET_GET_REGISTER,
+					 USB_TYPE_VENDOR | USB_DIR_OUT,
+					 reg, 0, tmp, sizeof(u8),
+					 F81534_USB_TIMEOUT);
+		if (status == sizeof(u8)) {
+			status = 0;
+			break;
+		}
+	}
+
+	if (status < 0) {
+		dev_err(&interface->dev, "%s: reg: %x data: %x failed: %d\n",
+				__func__, reg, data, status);
+	}
+
+	kfree(tmp);
+	return status;
+}
+
+static int f81534_get_register(struct usb_serial *serial, u16 reg, u8 *data)
+{
+	struct usb_interface *interface = serial->interface;
+	struct usb_device *dev = serial->dev;
+	size_t count = F81534_USB_MAX_RETRY;
+	int status;
+	u8 *tmp;
+
+	tmp = kmalloc(sizeof(u8), GFP_KERNEL);
+	if (!tmp)
+		return -ENOMEM;
+
+	/*
+	 * Our device maybe not reply when heavily loading, We'll retry for
+	 * F81534_USB_MAX_RETRY times.
+	 */
+	while (count--) {
+		status = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+					 F81534_SET_GET_REGISTER,
+					 USB_TYPE_VENDOR | USB_DIR_IN,
+					 reg, 0, tmp, sizeof(u8),
+					 F81534_USB_TIMEOUT);
+		if (status > 0) {
+			status = 0;
+			break;
+		} else if (status == 0) {
+			status = -EIO;
+		}
+	}
+
+	if (status < 0) {
+		dev_err(&interface->dev, "%s: reg: %x failed: %d\n", __func__,
+				reg, status);
+		goto end;
+	}
+
+	*data = *tmp;
+
+end:
+	kfree(tmp);
+	return status;
+}
+
+static int f81534_set_mask_register(struct usb_serial *serial, u16 reg,
+					u8 mask, u8 data)
+{
+	int status;
+	u8 tmp;
+
+	status = f81534_get_register(serial, reg, &tmp);
+	if (status)
+		return status;
+
+	tmp &= ~mask;
+	tmp |= (mask & data);
+
+	return f81534_set_register(serial, reg, tmp);
+}
+
+static int f81534_set_phy_port_register(struct usb_serial *serial, int phy,
+					u16 reg, u8 data)
+{
+	return f81534_set_register(serial, reg + F81534_UART_OFFSET * phy,
+					data);
+}
+
+static int f81534_get_phy_port_register(struct usb_serial *serial, int phy,
+					u16 reg, u8 *data)
+{
+	return f81534_get_register(serial, reg + F81534_UART_OFFSET * phy,
+					data);
+}
+
+static int f81534_set_port_register(struct usb_serial_port *port, u16 reg,
+					u8 data)
+{
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+
+	return f81534_set_register(port->serial,
+			reg + port_priv->phy_num * F81534_UART_OFFSET, data);
+}
+
+static int f81534_get_port_register(struct usb_serial_port *port, u16 reg,
+					u8 *data)
+{
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+
+	return f81534_get_register(port->serial,
+			reg + port_priv->phy_num * F81534_UART_OFFSET, data);
+}
+
+/*
+ * If we try to access the internal flash via SPI bus, we should check the bus
+ * status for every command. e.g., F81534_BUS_REG_START/F81534_BUS_REG_END
+ */
+static int f81534_wait_for_spi_idle(struct usb_serial *serial)
+{
+	size_t count = F81534_MAX_BUS_RETRY;
+	u8 tmp;
+	int status;
+
+	do {
+		status = f81534_get_register(serial, F81534_BUS_REG_STATUS,
+						&tmp);
+		if (status)
+			return status;
+
+		if (tmp & F81534_BUS_BUSY)
+			continue;
+
+		if (tmp & F81534_BUS_IDLE)
+			break;
+
+	} while (--count);
+
+	if (!count) {
+		dev_err(&serial->interface->dev,
+				"%s: timed out waiting for idle SPI bus\n",
+				__func__);
+		return -EIO;
+	}
+
+	return f81534_set_register(serial, F81534_BUS_REG_STATUS,
+				tmp & ~F81534_BUS_IDLE);
+}
+
+static int f81534_get_spi_register(struct usb_serial *serial, u16 reg,
+					u8 *data)
+{
+	int status;
+
+	status = f81534_get_register(serial, reg, data);
+	if (status)
+		return status;
+
+	return f81534_wait_for_spi_idle(serial);
+}
+
+static int f81534_set_spi_register(struct usb_serial *serial, u16 reg, u8 data)
+{
+	int status;
+
+	status = f81534_set_register(serial, reg, data);
+	if (status)
+		return status;
+
+	return f81534_wait_for_spi_idle(serial);
+}
+
+static int f81534_read_flash(struct usb_serial *serial, u32 address,
+				size_t size, u8 *buf)
+{
+	u8 tmp_buf[F81534_MAX_DATA_BLOCK];
+	size_t block = 0;
+	size_t read_size;
+	size_t count;
+	int status;
+	int offset;
+	u16 reg_tmp;
+
+	status = f81534_set_spi_register(serial, F81534_BUS_REG_START,
+					F81534_CMD_READ);
+	if (status)
+		return status;
+
+	status = f81534_set_spi_register(serial, F81534_BUS_REG_START,
+					(address >> 16) & 0xff);
+	if (status)
+		return status;
+
+	status = f81534_set_spi_register(serial, F81534_BUS_REG_START,
+					(address >> 8) & 0xff);
+	if (status)
+		return status;
+
+	status = f81534_set_spi_register(serial, F81534_BUS_REG_START,
+					(address >> 0) & 0xff);
+	if (status)
+		return status;
+
+	/* Continuous read mode */
+	do {
+		read_size = min_t(size_t, F81534_MAX_DATA_BLOCK, size);
+
+		for (count = 0; count < read_size; ++count) {
+			/* To write F81534_BUS_REG_END when final byte */
+			if (size <= F81534_MAX_DATA_BLOCK &&
+					read_size == count + 1)
+				reg_tmp = F81534_BUS_REG_END;
+			else
+				reg_tmp = F81534_BUS_REG_START;
+
+			/*
+			 * Dummy code, force IC to generate a read pulse, the
+			 * set of value 0xf1 is dont care (any value is ok)
+			 */
+			status = f81534_set_spi_register(serial, reg_tmp,
+					0xf1);
+			if (status)
+				return status;
+
+			status = f81534_get_spi_register(serial,
+						F81534_BUS_READ_DATA,
+						&tmp_buf[count]);
+			if (status)
+				return status;
+
+			offset = count + block * F81534_MAX_DATA_BLOCK;
+			buf[offset] = tmp_buf[count];
+		}
+
+		size -= read_size;
+		++block;
+	} while (size);
+
+	return 0;
+}
+
+static void f81534_prepare_write_buffer(struct usb_serial_port *port, u8 *buf)
+{
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+	int phy_num = port_priv->phy_num;
+	u8 tx_len;
+	int i;
+
+	/*
+	 * The block layout is fixed with 4x128 Bytes, per 128 Bytes a port.
+	 * index 0: port phy idx (e.g., 0,1,2,3)
+	 * index 1: only F81534_TOKEN_WRITE
+	 * index 2: serial TX out length
+	 * index 3: fix to 0
+	 * index 4~127: serial out data block
+	 */
+	for (i = 0; i < F81534_NUM_PORT; ++i) {
+		buf[i * F81534_RECEIVE_BLOCK_SIZE] = i;
+		buf[i * F81534_RECEIVE_BLOCK_SIZE + 1] = F81534_TOKEN_WRITE;
+		buf[i * F81534_RECEIVE_BLOCK_SIZE + 2] = 0;
+		buf[i * F81534_RECEIVE_BLOCK_SIZE + 3] = 0;
+	}
+
+	tx_len = kfifo_out_locked(&port->write_fifo,
+				&buf[phy_num * F81534_RECEIVE_BLOCK_SIZE + 4],
+				F81534_MAX_TX_SIZE, &port->lock);
+
+	buf[phy_num * F81534_RECEIVE_BLOCK_SIZE + 2] = tx_len;
+}
+
+static int f81534_submit_writer(struct usb_serial_port *port, gfp_t mem_flags)
+{
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+	struct urb *urb;
+	unsigned long flags;
+	int result;
+
+	/* Check is any data in write_fifo */
+	spin_lock_irqsave(&port->lock, flags);
+
+	if (kfifo_is_empty(&port->write_fifo)) {
+		spin_unlock_irqrestore(&port->lock, flags);
+		return 0;
+	}
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	/* Check H/W is TXEMPTY */
+	if (!test_and_clear_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty))
+		return 0;
+
+	urb = port->write_urbs[0];
+	f81534_prepare_write_buffer(port, port->bulk_out_buffers[0]);
+	urb->transfer_buffer_length = F81534_WRITE_BUFFER_SIZE;
+
+	result = usb_submit_urb(urb, mem_flags);
+	if (result) {
+		set_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty);
+		dev_err(&port->dev, "%s: submit failed: %d\n", __func__,
+				result);
+		return result;
+	}
+
+	usb_serial_port_softint(port);
+	return 0;
+}
+
+static u32 f81534_calc_baud_divisor(u32 baudrate, u32 clockrate)
+{
+	/* Round to nearest divisor */
+	return DIV_ROUND_CLOSEST(clockrate, baudrate);
+}
+
+static int f81534_find_clk(u32 baudrate)
+{
+	int idx;
+
+	for (idx = 0; idx < ARRAY_SIZE(baudrate_table); ++idx) {
+		if (baudrate <= baudrate_table[idx] &&
+				baudrate_table[idx] % baudrate == 0)
+			return idx;
+	}
+
+	return -EINVAL;
+}
+
+static int f81534_set_port_config(struct usb_serial_port *port,
+		struct tty_struct *tty, u32 baudrate, u32 old_baudrate, u8 lcr)
+{
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+	u32 divisor;
+	int status;
+	int i;
+	int idx;
+	u8 value;
+	u32 baud_list[] = {baudrate, old_baudrate, F81534_DEFAULT_BAUD_RATE};
+
+	for (i = 0; i < ARRAY_SIZE(baud_list); ++i) {
+		baudrate = baud_list[i];
+		if (baudrate == 0) {
+			tty_encode_baud_rate(tty, 0, 0);
+			return 0;
+		}
+
+		idx = f81534_find_clk(baudrate);
+		if (idx >= 0) {
+			tty_encode_baud_rate(tty, baudrate, baudrate);
+			break;
+		}
+	}
+
+	if (idx < 0)
+		return -EINVAL;
+
+	port_priv->baud_base = baudrate_table[idx];
+	port_priv->shadow_clk &= ~F81534_CLK_MASK;
+	port_priv->shadow_clk |= clock_table[idx];
+
+	status = f81534_set_port_register(port, F81534_CLOCK_REG,
+			port_priv->shadow_clk);
+	if (status) {
+		dev_err(&port->dev, "CLOCK_REG setting failed\n");
+		return status;
+	}
+
+	if (baudrate <= 1200)
+		value = F81534_1X_RXTRIGGER;	/* 128 FIFO & TL: 1x */
+	else
+		value = F81534_8X_RXTRIGGER;	/* 128 FIFO & TL: 8x */
+
+	status = f81534_set_port_register(port, F81534_CONFIG1_REG, value);
+	if (status) {
+		dev_err(&port->dev, "%s: CONFIG1 setting failed\n", __func__);
+		return status;
+	}
+
+	if (baudrate <= 1200)
+		value = UART_FCR_TRIGGER_1 | UART_FCR_ENABLE_FIFO; /* TL: 1 */
+	else
+		value = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO; /* TL: 8 */
+
+	status = f81534_set_port_register(port, F81534_FIFO_CONTROL_REG,
+						value);
+	if (status) {
+		dev_err(&port->dev, "%s: FCR setting failed\n", __func__);
+		return status;
+	}
+
+	divisor = f81534_calc_baud_divisor(baudrate, port_priv->baud_base);
+
+	mutex_lock(&port_priv->lcr_mutex);
+
+	value = UART_LCR_DLAB;
+	status = f81534_set_port_register(port, F81534_LINE_CONTROL_REG,
+						value);
+	if (status) {
+		dev_err(&port->dev, "%s: set LCR failed\n", __func__);
+		goto out_unlock;
+	}
+
+	value = divisor & 0xff;
+	status = f81534_set_port_register(port, F81534_DIVISOR_LSB_REG, value);
+	if (status) {
+		dev_err(&port->dev, "%s: set DLAB LSB failed\n", __func__);
+		goto out_unlock;
+	}
+
+	value = (divisor >> 8) & 0xff;
+	status = f81534_set_port_register(port, F81534_DIVISOR_MSB_REG, value);
+	if (status) {
+		dev_err(&port->dev, "%s: set DLAB MSB failed\n", __func__);
+		goto out_unlock;
+	}
+
+	value = lcr | (port_priv->shadow_lcr & UART_LCR_SBC);
+	status = f81534_set_port_register(port, F81534_LINE_CONTROL_REG,
+						value);
+	if (status) {
+		dev_err(&port->dev, "%s: set LCR failed\n", __func__);
+		goto out_unlock;
+	}
+
+	port_priv->shadow_lcr = value;
+out_unlock:
+	mutex_unlock(&port_priv->lcr_mutex);
+
+	return status;
+}
+
+static void f81534_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+	int status;
+
+	mutex_lock(&port_priv->lcr_mutex);
+
+	if (break_state)
+		port_priv->shadow_lcr |= UART_LCR_SBC;
+	else
+		port_priv->shadow_lcr &= ~UART_LCR_SBC;
+
+	status = f81534_set_port_register(port, F81534_LINE_CONTROL_REG,
+					port_priv->shadow_lcr);
+	if (status)
+		dev_err(&port->dev, "set break failed: %d\n", status);
+
+	mutex_unlock(&port_priv->lcr_mutex);
+}
+
+static int f81534_update_mctrl(struct usb_serial_port *port, unsigned int set,
+				unsigned int clear)
+{
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+	int status;
+	u8 tmp;
+
+	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0)
+		return 0;	/* no change */
+
+	mutex_lock(&port_priv->mcr_mutex);
+
+	/* 'Set' takes precedence over 'Clear' */
+	clear &= ~set;
+
+	/* Always enable UART_MCR_OUT2 */
+	tmp = UART_MCR_OUT2 | port_priv->shadow_mcr;
+
+	if (clear & TIOCM_DTR)
+		tmp &= ~UART_MCR_DTR;
+
+	if (clear & TIOCM_RTS)
+		tmp &= ~UART_MCR_RTS;
+
+	if (set & TIOCM_DTR)
+		tmp |= UART_MCR_DTR;
+
+	if (set & TIOCM_RTS)
+		tmp |= UART_MCR_RTS;
+
+	status = f81534_set_port_register(port, F81534_MODEM_CONTROL_REG, tmp);
+	if (status < 0) {
+		dev_err(&port->dev, "%s: MCR write failed\n", __func__);
+		mutex_unlock(&port_priv->mcr_mutex);
+		return status;
+	}
+
+	port_priv->shadow_mcr = tmp;
+	mutex_unlock(&port_priv->mcr_mutex);
+	return 0;
+}
+
+/*
+ * This function will search the data area with token F81534_CUSTOM_VALID_TOKEN
+ * for latest configuration index. If nothing found
+ * (*index = F81534_CUSTOM_NO_CUSTOM_DATA), We'll load default configure in
+ * F81534_DEF_CONF_ADDRESS_START section.
+ *
+ * Due to we only use block0 to save data, so *index should be 0 or
+ * F81534_CUSTOM_NO_CUSTOM_DATA.
+ */
+static int f81534_find_config_idx(struct usb_serial *serial, u8 *index)
+{
+	u8 tmp;
+	int status;
+
+	status = f81534_read_flash(serial, F81534_CUSTOM_ADDRESS_START, 1,
+					&tmp);
+	if (status) {
+		dev_err(&serial->interface->dev, "%s: read failed: %d\n",
+				__func__, status);
+		return status;
+	}
+
+	/* We'll use the custom data when the data is valid. */
+	if (tmp == F81534_CUSTOM_VALID_TOKEN)
+		*index = 0;
+	else
+		*index = F81534_CUSTOM_NO_CUSTOM_DATA;
+
+	return 0;
+}
+
+/*
+ * The F81532/534 will not report serial port to USB serial subsystem when
+ * H/W DCD/DSR/CTS/RI/RX pin connected to ground.
+ *
+ * To detect RX pin status, we'll enable MCR interal loopback, disable it and
+ * delayed for 60ms. It connected to ground If LSR register report UART_LSR_BI.
+ */
+static bool f81534_check_port_hw_disabled(struct usb_serial *serial, int phy)
+{
+	int status;
+	u8 old_mcr;
+	u8 msr;
+	u8 lsr;
+	u8 msr_mask;
+
+	msr_mask = UART_MSR_DCD | UART_MSR_RI | UART_MSR_DSR | UART_MSR_CTS;
+
+	status = f81534_get_phy_port_register(serial, phy,
+				F81534_MODEM_STATUS_REG, &msr);
+	if (status)
+		return false;
+
+	if ((msr & msr_mask) != msr_mask)
+		return false;
+
+	status = f81534_set_phy_port_register(serial, phy,
+				F81534_FIFO_CONTROL_REG, UART_FCR_ENABLE_FIFO |
+				UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+	if (status)
+		return false;
+
+	status = f81534_get_phy_port_register(serial, phy,
+				F81534_MODEM_CONTROL_REG, &old_mcr);
+	if (status)
+		return false;
+
+	status = f81534_set_phy_port_register(serial, phy,
+				F81534_MODEM_CONTROL_REG, UART_MCR_LOOP);
+	if (status)
+		return false;
+
+	status = f81534_set_phy_port_register(serial, phy,
+				F81534_MODEM_CONTROL_REG, 0x0);
+	if (status)
+		return false;
+
+	msleep(60);
+
+	status = f81534_get_phy_port_register(serial, phy,
+				F81534_LINE_STATUS_REG, &lsr);
+	if (status)
+		return false;
+
+	status = f81534_set_phy_port_register(serial, phy,
+				F81534_MODEM_CONTROL_REG, old_mcr);
+	if (status)
+		return false;
+
+	if ((lsr & UART_LSR_BI) == UART_LSR_BI)
+		return true;
+
+	return false;
+}
+
+/*
+ * We had 2 generation of F81532/534 IC. All has an internal storage.
+ *
+ * 1st is pure USB-to-TTL RS232 IC and designed for 4 ports only, no any
+ * internal data will used. All mode and gpio control should manually set
+ * by AP or Driver and all storage space value are 0xff. The
+ * f81534_calc_num_ports() will run to final we marked as "oldest version"
+ * for this IC.
+ *
+ * 2rd is designed to more generic to use any transceiver and this is our
+ * mass production type. We'll save data in F81534_CUSTOM_ADDRESS_START
+ * (0x2f00) with 9bytes. The 1st byte is a indicater. If the token is
+ * F81534_CUSTOM_VALID_TOKEN(0xf0), the IC is 2nd gen type, the following
+ * 4bytes save port mode (0:RS232/1:RS485 Invert/2:RS485), and the last
+ * 4bytes save GPIO state(value from 0~7 to represent 3 GPIO output pin).
+ * The f81534_calc_num_ports() will run to "new style" with checking
+ * F81534_PORT_UNAVAILABLE section.
+ */
+static int f81534_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds)
+{
+	struct f81534_serial_private *serial_priv;
+	struct device *dev = &serial->interface->dev;
+	int size_bulk_in = usb_endpoint_maxp(epds->bulk_in[0]);
+	int size_bulk_out = usb_endpoint_maxp(epds->bulk_out[0]);
+	u8 num_port = 0;
+	int index = 0;
+	int status;
+	int i;
+
+	if (size_bulk_out != F81534_WRITE_BUFFER_SIZE ||
+			size_bulk_in != F81534_MAX_RECEIVE_BLOCK_SIZE) {
+		dev_err(dev, "unsupported endpoint max packet size\n");
+		return -ENODEV;
+	}
+
+	serial_priv = devm_kzalloc(&serial->interface->dev,
+					sizeof(*serial_priv), GFP_KERNEL);
+	if (!serial_priv)
+		return -ENOMEM;
+
+	usb_set_serial_data(serial, serial_priv);
+	mutex_init(&serial_priv->urb_mutex);
+
+	/* Check had custom setting */
+	status = f81534_find_config_idx(serial, &serial_priv->setting_idx);
+	if (status) {
+		dev_err(&serial->interface->dev, "%s: find idx failed: %d\n",
+				__func__, status);
+		return status;
+	}
+
+	/*
+	 * We'll read custom data only when data available, otherwise we'll
+	 * read default value instead.
+	 */
+	if (serial_priv->setting_idx != F81534_CUSTOM_NO_CUSTOM_DATA) {
+		status = f81534_read_flash(serial,
+						F81534_CUSTOM_ADDRESS_START +
+						F81534_CONF_OFFSET,
+						sizeof(serial_priv->conf_data),
+						serial_priv->conf_data);
+		if (status) {
+			dev_err(&serial->interface->dev,
+					"%s: get custom data failed: %d\n",
+					__func__, status);
+			return status;
+		}
+
+		dev_dbg(&serial->interface->dev,
+				"%s: read config from block: %d\n", __func__,
+				serial_priv->setting_idx);
+	} else {
+		/* Read default board setting */
+		status = f81534_read_flash(serial,
+				F81534_DEF_CONF_ADDRESS_START,
+				sizeof(serial_priv->conf_data),
+				serial_priv->conf_data);
+		if (status) {
+			dev_err(&serial->interface->dev,
+					"%s: read failed: %d\n", __func__,
+					status);
+			return status;
+		}
+
+		dev_dbg(&serial->interface->dev, "%s: read default config\n",
+				__func__);
+	}
+
+	/* New style, find all possible ports */
+	for (i = 0; i < F81534_NUM_PORT; ++i) {
+		if (f81534_check_port_hw_disabled(serial, i))
+			serial_priv->conf_data[i] |= F81534_PORT_UNAVAILABLE;
+
+		if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE)
+			continue;
+
+		++num_port;
+	}
+
+	if (!num_port) {
+		dev_warn(&serial->interface->dev,
+			"no config found, assuming 4 ports\n");
+		num_port = 4;		/* Nothing found, oldest version IC */
+	}
+
+	/* Assign phy-to-logic mapping */
+	for (i = 0; i < F81534_NUM_PORT; ++i) {
+		if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE)
+			continue;
+
+		serial_priv->tty_idx[i] = index++;
+		dev_dbg(&serial->interface->dev,
+				"%s: phy_num: %d, tty_idx: %d\n", __func__, i,
+				serial_priv->tty_idx[i]);
+	}
+
+	/*
+	 * Setup bulk-out endpoint multiplexing. All ports share the same
+	 * bulk-out endpoint.
+	 */
+	BUILD_BUG_ON(ARRAY_SIZE(epds->bulk_out) < F81534_NUM_PORT);
+
+	for (i = 1; i < num_port; ++i)
+		epds->bulk_out[i] = epds->bulk_out[0];
+
+	epds->num_bulk_out = num_port;
+
+	return num_port;
+}
+
+static void f81534_set_termios(struct tty_struct *tty,
+			       struct usb_serial_port *port,
+			       const struct ktermios *old_termios)
+{
+	u8 new_lcr = 0;
+	int status;
+	u32 baud;
+	u32 old_baud;
+
+	if (C_BAUD(tty) == B0)
+		f81534_update_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
+	else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+		f81534_update_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
+
+	if (C_PARENB(tty)) {
+		new_lcr |= UART_LCR_PARITY;
+
+		if (!C_PARODD(tty))
+			new_lcr |= UART_LCR_EPAR;
+
+		if (C_CMSPAR(tty))
+			new_lcr |= UART_LCR_SPAR;
+	}
+
+	if (C_CSTOPB(tty))
+		new_lcr |= UART_LCR_STOP;
+
+	new_lcr |= UART_LCR_WLEN(tty_get_char_size(tty->termios.c_cflag));
+
+	baud = tty_get_baud_rate(tty);
+	if (!baud)
+		return;
+
+	if (old_termios)
+		old_baud = tty_termios_baud_rate(old_termios);
+	else
+		old_baud = F81534_DEFAULT_BAUD_RATE;
+
+	dev_dbg(&port->dev, "%s: baud: %d\n", __func__, baud);
+
+	status = f81534_set_port_config(port, tty, baud, old_baud, new_lcr);
+	if (status < 0) {
+		dev_err(&port->dev, "%s: set port config failed: %d\n",
+				__func__, status);
+	}
+}
+
+static int f81534_submit_read_urb(struct usb_serial *serial, gfp_t flags)
+{
+	return usb_serial_generic_submit_read_urbs(serial->port[0], flags);
+}
+
+static void f81534_msr_changed(struct usb_serial_port *port, u8 msr)
+{
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+	struct tty_struct *tty;
+	unsigned long flags;
+	u8 old_msr;
+
+	if (!(msr & UART_MSR_ANY_DELTA))
+		return;
+
+	spin_lock_irqsave(&port_priv->msr_lock, flags);
+	old_msr = port_priv->shadow_msr;
+	port_priv->shadow_msr = msr;
+	spin_unlock_irqrestore(&port_priv->msr_lock, flags);
+
+	dev_dbg(&port->dev, "%s: MSR from %02x to %02x\n", __func__, old_msr,
+			msr);
+
+	/* Update input line counters */
+	if (msr & UART_MSR_DCTS)
+		port->icount.cts++;
+	if (msr & UART_MSR_DDSR)
+		port->icount.dsr++;
+	if (msr & UART_MSR_DDCD)
+		port->icount.dcd++;
+	if (msr & UART_MSR_TERI)
+		port->icount.rng++;
+
+	wake_up_interruptible(&port->port.delta_msr_wait);
+
+	if (!(msr & UART_MSR_DDCD))
+		return;
+
+	dev_dbg(&port->dev, "%s: DCD Changed: phy_num: %d from %x to %x\n",
+			__func__, port_priv->phy_num, old_msr, msr);
+
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+
+	usb_serial_handle_dcd_change(port, tty, msr & UART_MSR_DCD);
+	tty_kref_put(tty);
+}
+
+static int f81534_read_msr(struct usb_serial_port *port)
+{
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	int status;
+	u8 msr;
+
+	/* Get MSR initial value */
+	status = f81534_get_port_register(port, F81534_MODEM_STATUS_REG, &msr);
+	if (status)
+		return status;
+
+	/* Force update current state */
+	spin_lock_irqsave(&port_priv->msr_lock, flags);
+	port_priv->shadow_msr = msr;
+	spin_unlock_irqrestore(&port_priv->msr_lock, flags);
+
+	return 0;
+}
+
+static int f81534_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct f81534_serial_private *serial_priv =
+			usb_get_serial_data(port->serial);
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+	int status;
+
+	status = f81534_set_port_register(port,
+				F81534_FIFO_CONTROL_REG, UART_FCR_ENABLE_FIFO |
+				UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+	if (status) {
+		dev_err(&port->dev, "%s: Clear FIFO failed: %d\n", __func__,
+				status);
+		return status;
+	}
+
+	if (tty)
+		f81534_set_termios(tty, port, NULL);
+
+	status = f81534_read_msr(port);
+	if (status)
+		return status;
+
+	mutex_lock(&serial_priv->urb_mutex);
+
+	/* Submit Read URBs for first port opened */
+	if (!serial_priv->opened_port) {
+		status = f81534_submit_read_urb(port->serial, GFP_KERNEL);
+		if (status)
+			goto exit;
+	}
+
+	serial_priv->opened_port++;
+
+exit:
+	mutex_unlock(&serial_priv->urb_mutex);
+
+	set_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty);
+	return status;
+}
+
+static void f81534_close(struct usb_serial_port *port)
+{
+	struct f81534_serial_private *serial_priv =
+			usb_get_serial_data(port->serial);
+	struct usb_serial_port *port0 = port->serial->port[0];
+	unsigned long flags;
+	size_t i;
+
+	usb_kill_urb(port->write_urbs[0]);
+
+	spin_lock_irqsave(&port->lock, flags);
+	kfifo_reset_out(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	/* Kill Read URBs when final port closed */
+	mutex_lock(&serial_priv->urb_mutex);
+	serial_priv->opened_port--;
+
+	if (!serial_priv->opened_port) {
+		for (i = 0; i < ARRAY_SIZE(port0->read_urbs); ++i)
+			usb_kill_urb(port0->read_urbs[i]);
+	}
+
+	mutex_unlock(&serial_priv->urb_mutex);
+}
+
+static void f81534_get_serial_info(struct tty_struct *tty, struct serial_struct *ss)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct f81534_port_private *port_priv;
+
+	port_priv = usb_get_serial_port_data(port);
+
+	ss->baud_base = port_priv->baud_base;
+}
+
+static void f81534_process_per_serial_block(struct usb_serial_port *port,
+		u8 *data)
+{
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+	int phy_num = data[0];
+	size_t read_size = 0;
+	size_t i;
+	char tty_flag;
+	int status;
+	u8 lsr;
+
+	/*
+	 * The block layout is 128 Bytes
+	 * index 0: port phy idx (e.g., 0,1,2,3),
+	 * index 1: It's could be
+	 *			F81534_TOKEN_RECEIVE
+	 *			F81534_TOKEN_TX_EMPTY
+	 *			F81534_TOKEN_MSR_CHANGE
+	 * index 2: serial in size (data+lsr, must be even)
+	 *			meaningful for F81534_TOKEN_RECEIVE only
+	 * index 3: current MSR with this device
+	 * index 4~127: serial in data block (data+lsr, must be even)
+	 */
+	switch (data[1]) {
+	case F81534_TOKEN_TX_EMPTY:
+		set_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty);
+
+		/* Try to submit writer */
+		status = f81534_submit_writer(port, GFP_ATOMIC);
+		if (status)
+			dev_err(&port->dev, "%s: submit failed\n", __func__);
+		return;
+
+	case F81534_TOKEN_MSR_CHANGE:
+		f81534_msr_changed(port, data[3]);
+		return;
+
+	case F81534_TOKEN_RECEIVE:
+		read_size = data[2];
+		if (read_size > F81534_MAX_RX_SIZE) {
+			dev_err(&port->dev,
+				"%s: phy: %d read_size: %zu larger than: %d\n",
+				__func__, phy_num, read_size,
+				F81534_MAX_RX_SIZE);
+			return;
+		}
+
+		break;
+
+	default:
+		dev_warn(&port->dev, "%s: unknown token: %02x\n", __func__,
+				data[1]);
+		return;
+	}
+
+	for (i = 4; i < 4 + read_size; i += 2) {
+		tty_flag = TTY_NORMAL;
+		lsr = data[i + 1];
+
+		if (lsr & UART_LSR_BRK_ERROR_BITS) {
+			if (lsr & UART_LSR_BI) {
+				tty_flag = TTY_BREAK;
+				port->icount.brk++;
+				usb_serial_handle_break(port);
+			} else if (lsr & UART_LSR_PE) {
+				tty_flag = TTY_PARITY;
+				port->icount.parity++;
+			} else if (lsr & UART_LSR_FE) {
+				tty_flag = TTY_FRAME;
+				port->icount.frame++;
+			}
+
+			if (lsr & UART_LSR_OE) {
+				port->icount.overrun++;
+				tty_insert_flip_char(&port->port, 0,
+						TTY_OVERRUN);
+			}
+
+			schedule_work(&port_priv->lsr_work);
+		}
+
+		if (port->sysrq) {
+			if (usb_serial_handle_sysrq_char(port, data[i]))
+				continue;
+		}
+
+		tty_insert_flip_char(&port->port, data[i], tty_flag);
+	}
+
+	tty_flip_buffer_push(&port->port);
+}
+
+static void f81534_process_read_urb(struct urb *urb)
+{
+	struct f81534_serial_private *serial_priv;
+	struct usb_serial_port *port;
+	struct usb_serial *serial;
+	u8 *buf;
+	int phy_port_num;
+	int tty_port_num;
+	size_t i;
+
+	if (!urb->actual_length ||
+			urb->actual_length % F81534_RECEIVE_BLOCK_SIZE) {
+		return;
+	}
+
+	port = urb->context;
+	serial = port->serial;
+	buf = urb->transfer_buffer;
+	serial_priv = usb_get_serial_data(serial);
+
+	for (i = 0; i < urb->actual_length; i += F81534_RECEIVE_BLOCK_SIZE) {
+		phy_port_num = buf[i];
+		if (phy_port_num >= F81534_NUM_PORT) {
+			dev_err(&port->dev,
+				"%s: phy_port_num: %d larger than: %d\n",
+				__func__, phy_port_num, F81534_NUM_PORT);
+			continue;
+		}
+
+		tty_port_num = serial_priv->tty_idx[phy_port_num];
+		port = serial->port[tty_port_num];
+
+		if (tty_port_initialized(&port->port))
+			f81534_process_per_serial_block(port, &buf[i]);
+	}
+}
+
+static void f81534_write_usb_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+
+	switch (urb->status) {
+	case 0:
+		break;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		dev_dbg(&port->dev, "%s - urb stopped: %d\n",
+				__func__, urb->status);
+		return;
+	case -EPIPE:
+		dev_err(&port->dev, "%s - urb stopped: %d\n",
+				__func__, urb->status);
+		return;
+	default:
+		dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
+				__func__, urb->status);
+		break;
+	}
+}
+
+static void f81534_lsr_worker(struct work_struct *work)
+{
+	struct f81534_port_private *port_priv;
+	struct usb_serial_port *port;
+	int status;
+	u8 tmp;
+
+	port_priv = container_of(work, struct f81534_port_private, lsr_work);
+	port = port_priv->port;
+
+	status = f81534_get_port_register(port, F81534_LINE_STATUS_REG, &tmp);
+	if (status)
+		dev_warn(&port->dev, "read LSR failed: %d\n", status);
+}
+
+static int f81534_set_port_output_pin(struct usb_serial_port *port)
+{
+	struct f81534_serial_private *serial_priv;
+	struct f81534_port_private *port_priv;
+	struct usb_serial *serial;
+	const struct f81534_port_out_pin *pins;
+	int status;
+	int i;
+	u8 value;
+	u8 idx;
+
+	serial = port->serial;
+	serial_priv = usb_get_serial_data(serial);
+	port_priv = usb_get_serial_port_data(port);
+
+	idx = F81534_CONF_INIT_GPIO_OFFSET + port_priv->phy_num;
+	value = serial_priv->conf_data[idx];
+	if (value >= F81534_CONF_GPIO_SHUTDOWN) {
+		/*
+		 * Newer IC configure will make transceiver in shutdown mode on
+		 * initial power on. We need enable it before using UARTs.
+		 */
+		idx = F81534_CONF_WORK_GPIO_OFFSET + port_priv->phy_num;
+		value = serial_priv->conf_data[idx];
+		if (value >= F81534_CONF_GPIO_SHUTDOWN)
+			value = F81534_CONF_GPIO_RS232;
+	}
+
+	pins = &f81534_port_out_pins[port_priv->phy_num];
+
+	for (i = 0; i < ARRAY_SIZE(pins->pin); ++i) {
+		status = f81534_set_mask_register(serial,
+				pins->pin[i].reg_addr, pins->pin[i].reg_mask,
+				value & BIT(i) ? pins->pin[i].reg_mask : 0);
+		if (status)
+			return status;
+	}
+
+	dev_dbg(&port->dev, "Output pin (M0/M1/M2): %d\n", value);
+	return 0;
+}
+
+static int f81534_port_probe(struct usb_serial_port *port)
+{
+	struct f81534_serial_private *serial_priv;
+	struct f81534_port_private *port_priv;
+	int ret;
+	u8 value;
+
+	serial_priv = usb_get_serial_data(port->serial);
+	port_priv = devm_kzalloc(&port->dev, sizeof(*port_priv), GFP_KERNEL);
+	if (!port_priv)
+		return -ENOMEM;
+
+	/*
+	 * We'll make tx frame error when baud rate from 384~500kps. So we'll
+	 * delay all tx data frame with 1bit.
+	 */
+	port_priv->shadow_clk = F81534_UART_EN | F81534_CLK_TX_DELAY_1BIT;
+	spin_lock_init(&port_priv->msr_lock);
+	mutex_init(&port_priv->mcr_mutex);
+	mutex_init(&port_priv->lcr_mutex);
+	INIT_WORK(&port_priv->lsr_work, f81534_lsr_worker);
+
+	/* Assign logic-to-phy mapping */
+	ret = f81534_logic_to_phy_port(port->serial, port);
+	if (ret < 0)
+		return ret;
+
+	port_priv->phy_num = ret;
+	port_priv->port = port;
+	usb_set_serial_port_data(port, port_priv);
+	dev_dbg(&port->dev, "%s: port_number: %d, phy_num: %d\n", __func__,
+			port->port_number, port_priv->phy_num);
+
+	/*
+	 * The F81532/534 will hang-up when enable LSR interrupt in IER and
+	 * occur data overrun. So we'll disable the LSR interrupt in probe()
+	 * and submit the LSR worker to clear LSR state when reported LSR error
+	 * bit with bulk-in data in f81534_process_per_serial_block().
+	 */
+	ret = f81534_set_port_register(port, F81534_INTERRUPT_ENABLE_REG,
+			UART_IER_RDI | UART_IER_THRI | UART_IER_MSI);
+	if (ret)
+		return ret;
+
+	value = serial_priv->conf_data[port_priv->phy_num];
+	switch (value & F81534_PORT_CONF_MODE_MASK) {
+	case F81534_PORT_CONF_RS485_INVERT:
+		port_priv->shadow_clk |= F81534_CLK_RS485_MODE |
+					F81534_CLK_RS485_INVERT;
+		dev_dbg(&port->dev, "RS485 invert mode\n");
+		break;
+	case F81534_PORT_CONF_RS485:
+		port_priv->shadow_clk |= F81534_CLK_RS485_MODE;
+		dev_dbg(&port->dev, "RS485 mode\n");
+		break;
+
+	default:
+	case F81534_PORT_CONF_RS232:
+		dev_dbg(&port->dev, "RS232 mode\n");
+		break;
+	}
+
+	return f81534_set_port_output_pin(port);
+}
+
+static void f81534_port_remove(struct usb_serial_port *port)
+{
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+
+	flush_work(&port_priv->lsr_work);
+}
+
+static int f81534_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+	int status;
+	int r;
+	u8 msr;
+	u8 mcr;
+
+	/* Read current MSR from device */
+	status = f81534_get_port_register(port, F81534_MODEM_STATUS_REG, &msr);
+	if (status)
+		return status;
+
+	mutex_lock(&port_priv->mcr_mutex);
+	mcr = port_priv->shadow_mcr;
+	mutex_unlock(&port_priv->mcr_mutex);
+
+	r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
+	    (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
+	    (msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
+	    (msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
+	    (msr & UART_MSR_RI ? TIOCM_RI : 0) |
+	    (msr & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+	return r;
+}
+
+static int f81534_tiocmset(struct tty_struct *tty, unsigned int set,
+				unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	return f81534_update_mctrl(port, set, clear);
+}
+
+static void f81534_dtr_rts(struct usb_serial_port *port, int on)
+{
+	if (on)
+		f81534_update_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
+	else
+		f81534_update_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
+}
+
+static int f81534_write(struct tty_struct *tty, struct usb_serial_port *port,
+			const u8 *buf, int count)
+{
+	int bytes_out, status;
+
+	if (!count)
+		return 0;
+
+	bytes_out = kfifo_in_locked(&port->write_fifo, buf, count,
+					&port->lock);
+
+	status = f81534_submit_writer(port, GFP_ATOMIC);
+	if (status) {
+		dev_err(&port->dev, "%s: submit failed\n", __func__);
+		return status;
+	}
+
+	return bytes_out;
+}
+
+static bool f81534_tx_empty(struct usb_serial_port *port)
+{
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+
+	return test_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty);
+}
+
+static int f81534_resume(struct usb_serial *serial)
+{
+	struct f81534_serial_private *serial_priv =
+			usb_get_serial_data(serial);
+	struct usb_serial_port *port;
+	int error = 0;
+	int status;
+	size_t i;
+
+	/*
+	 * We'll register port 0 bulkin when port had opened, It'll take all
+	 * port received data, MSR register change and TX_EMPTY information.
+	 */
+	mutex_lock(&serial_priv->urb_mutex);
+
+	if (serial_priv->opened_port) {
+		status = f81534_submit_read_urb(serial, GFP_NOIO);
+		if (status) {
+			mutex_unlock(&serial_priv->urb_mutex);
+			return status;
+		}
+	}
+
+	mutex_unlock(&serial_priv->urb_mutex);
+
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		if (!tty_port_initialized(&port->port))
+			continue;
+
+		status = f81534_submit_writer(port, GFP_NOIO);
+		if (status) {
+			dev_err(&port->dev, "%s: submit failed\n", __func__);
+			++error;
+		}
+	}
+
+	if (error)
+		return -EIO;
+
+	return 0;
+}
+
+static struct usb_serial_driver f81534_device = {
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .name = "f81534",
+	},
+	.description =		DRIVER_DESC,
+	.id_table =		f81534_id_table,
+	.num_bulk_in =		1,
+	.num_bulk_out =		1,
+	.open =			f81534_open,
+	.close =		f81534_close,
+	.write =		f81534_write,
+	.tx_empty =		f81534_tx_empty,
+	.calc_num_ports =	f81534_calc_num_ports,
+	.port_probe =		f81534_port_probe,
+	.port_remove =		f81534_port_remove,
+	.break_ctl =		f81534_break_ctl,
+	.dtr_rts =		f81534_dtr_rts,
+	.process_read_urb =	f81534_process_read_urb,
+	.get_serial =		f81534_get_serial_info,
+	.tiocmget =		f81534_tiocmget,
+	.tiocmset =		f81534_tiocmset,
+	.write_bulk_callback =	f81534_write_usb_callback,
+	.set_termios =		f81534_set_termios,
+	.resume =		f81534_resume,
+};
+
+static struct usb_serial_driver *const serial_drivers[] = {
+	&f81534_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, f81534_id_table);
+
+MODULE_DEVICE_TABLE(usb, f81534_id_table);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Peter Hong <Peter_Hong@fintek.com.tw>");
+MODULE_AUTHOR("Tom Tsai <Tom_Tsai@fintek.com.tw>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
new file mode 100644
index 000000000..fe2173e37
--- /dev/null
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -0,0 +1,2908 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * USB FTDI SIO driver
+ *
+ *	Copyright (C) 2009 - 2013
+ *	    Johan Hovold (jhovold@gmail.com)
+ *	Copyright (C) 1999 - 2001
+ *	    Greg Kroah-Hartman (greg@kroah.com)
+ *          Bill Ryder (bryder@sgi.com)
+ *	Copyright (C) 2002
+ *	    Kuba Ober (kuba@mareimbrium.org)
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ *
+ * See http://ftdi-usb-sio.sourceforge.net for up to date testing info
+ *	and extra documentation
+ *
+ * Change entries from 2004 and earlier can be found in versions of this
+ * file in kernel versions prior to the 2.6.24 release.
+ *
+ */
+
+/* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */
+/* Thanx to FTDI for so kindly providing details of the protocol required */
+/*   to talk to the device */
+/* Thanx to gkh and the rest of the usb dev group for all code I have
+   assimilated :-) */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/serial.h>
+#include <linux/gpio/driver.h>
+#include <linux/usb/serial.h>
+#include "ftdi_sio.h"
+#include "ftdi_sio_ids.h"
+
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>"
+#define DRIVER_DESC "USB FTDI Serial Converters Driver"
+
+enum ftdi_chip_type {
+	SIO,
+	FT232A,
+	FT232B,
+	FT2232C,
+	FT232R,
+	FT232H,
+	FT2232H,
+	FT4232H,
+	FT4232HA,
+	FT232HP,
+	FT233HP,
+	FT2232HP,
+	FT2233HP,
+	FT4232HP,
+	FT4233HP,
+	FTX,
+};
+
+struct ftdi_private {
+	enum ftdi_chip_type chip_type;
+	int baud_base;		/* baud base clock for divisor setting */
+	int custom_divisor;	/* custom_divisor kludge, this is for
+				   baud_base (different from what goes to the
+				   chip!) */
+	u16 last_set_data_value; /* the last data state set - needed for doing
+				  * a break
+				  */
+	int flags;		/* some ASYNC_xxxx flags are supported */
+	unsigned long last_dtr_rts;	/* saved modem control outputs */
+	char prev_status;        /* Used for TIOCMIWAIT */
+	char transmit_empty;	/* If transmitter is empty or not */
+	u16 channel;		/* channel index, or 0 for legacy types */
+
+	speed_t force_baud;	/* if non-zero, force the baud rate to
+				   this value */
+	int force_rtscts;	/* if non-zero, force RTS-CTS to always
+				   be enabled */
+
+	unsigned int latency;		/* latency setting in use */
+	unsigned short max_packet_size;
+	struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() and change_speed() */
+#ifdef CONFIG_GPIOLIB
+	struct gpio_chip gc;
+	struct mutex gpio_lock;	/* protects GPIO state */
+	bool gpio_registered;	/* is the gpiochip in kernel registered */
+	bool gpio_used;		/* true if the user requested a gpio */
+	u8 gpio_altfunc;	/* which pins are in gpio mode */
+	u8 gpio_output;		/* pin directions cache */
+	u8 gpio_value;		/* pin value for outputs */
+#endif
+};
+
+struct ftdi_quirk {
+	int (*probe)(struct usb_serial *);
+	/* Special settings for probed ports. */
+	void (*port_probe)(struct ftdi_private *);
+};
+
+static int   ftdi_jtag_probe(struct usb_serial *serial);
+static int   ftdi_NDI_device_setup(struct usb_serial *serial);
+static int   ftdi_stmclite_probe(struct usb_serial *serial);
+static int   ftdi_8u2232c_probe(struct usb_serial *serial);
+static void  ftdi_USB_UIRT_setup(struct ftdi_private *priv);
+static void  ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
+
+static const struct ftdi_quirk ftdi_jtag_quirk = {
+	.probe	= ftdi_jtag_probe,
+};
+
+static const struct ftdi_quirk ftdi_NDI_device_quirk = {
+	.probe	= ftdi_NDI_device_setup,
+};
+
+static const struct ftdi_quirk ftdi_USB_UIRT_quirk = {
+	.port_probe = ftdi_USB_UIRT_setup,
+};
+
+static const struct ftdi_quirk ftdi_HE_TIRA1_quirk = {
+	.port_probe = ftdi_HE_TIRA1_setup,
+};
+
+static const struct ftdi_quirk ftdi_stmclite_quirk = {
+	.probe	= ftdi_stmclite_probe,
+};
+
+static const struct ftdi_quirk ftdi_8u2232c_quirk = {
+	.probe	= ftdi_8u2232c_probe,
+};
+
+/*
+ * The 8U232AM has the same API as the sio except for:
+ * - it can support MUCH higher baudrates; up to:
+ *   o 921600 for RS232 and 2000000 for RS422/485 at 48MHz
+ *   o 230400 at 12MHz
+ *   so .. 8U232AM's baudrate setting codes are different
+ * - it has a two byte status code.
+ * - it returns characters every 16ms (the FTDI does it every 40ms)
+ *
+ * the bcdDevice value is used to differentiate FT232BM and FT245BM from
+ * the earlier FT8U232AM and FT8U232BM.  For now, include all known VID/PID
+ * combinations in both tables.
+ * FIXME: perhaps bcdDevice can also identify 12MHz FT8U232AM devices,
+ * but I don't know if those ever went into mass production. [Ian Abbott]
+ */
+
+
+
+/*
+ * Device ID not listed? Test it using
+ * /sys/bus/usb-serial/drivers/ftdi_sio/new_id and send a patch or report.
+ */
+static const struct usb_device_id id_table_combined[] = {
+	{ USB_DEVICE(FTDI_VID, FTDI_BRICK_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_BM_ATOM_NANO_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_EV3CON_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_3_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_4_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_USINT_CAT_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_USINT_WKEY_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_USINT_RS232_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_IPLUS2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DMX4ALL) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) ,
+		.driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_FTX_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_FT2233HP_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_FT4233HP_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_FT2232HP_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_FT4232HP_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_FT233HP_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_FT232HP_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_FT4232HA_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_BOOST_PID) },
+	{ USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) },
+	{ USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_CC_PID) },
+	{ USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_AGP_PID) },
+	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
+	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
+	{ USB_DEVICE(FTDI_VID, FTDI_TAGSYS_LP101_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_TAGSYS_P200X_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_XF_633_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_XF_631_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_XF_635_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_URBAN_0_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_URBAN_1_PID) },
+	{ USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
+	{ USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_AUTO_M3_OP_COM_V2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0103_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0104_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0105_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0106_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0107_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0108_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0109_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0110_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0111_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0112_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0113_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0114_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0115_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0116_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0117_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0118_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0119_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0120_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0121_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0122_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0123_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0124_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0125_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0126_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0127_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0128_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0129_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0130_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0131_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0132_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0133_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0134_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0135_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0136_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0137_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0138_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0139_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0140_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0141_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0142_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0143_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0144_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0145_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0146_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0147_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0148_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0149_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0150_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0151_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0152_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0153_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0154_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0155_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0156_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0157_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0158_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0159_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0160_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0161_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0162_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0163_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0164_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0165_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0166_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0167_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0168_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0169_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0170_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0171_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0172_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0173_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0174_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0175_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0176_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0177_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0178_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0179_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0180_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0181_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0182_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0183_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0184_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0185_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0186_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0187_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0188_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0189_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0190_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0191_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0192_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0193_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0194_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0195_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0196_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0197_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0198_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0199_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AD_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BD_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CD_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DD_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01ED_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_4701_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9300_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9301_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9302_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9303_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9304_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9305_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9306_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9307_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9308_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9309_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9310_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9311_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9312_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9313_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9314_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9315_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9316_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9317_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9318_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9319_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931F_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_USBX_707_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2104_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2106_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_1_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_2_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_1_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_2_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_1_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_2_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_1_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_2_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_3_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_4_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_1_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_2_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_3_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_4_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_1_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_2_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_3_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_4_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_1_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_2_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_3_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_4_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_5_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_6_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_7_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_8_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_1_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_2_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_3_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_4_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_5_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_6_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_7_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_8_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_1_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_2_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_3_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_4_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_5_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_1_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_2_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_3_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_4_PID) },
+	{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
+	{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
+	{ USB_DEVICE(OCT_VID, OCT_DK201_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk },
+	{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
+	{ USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
+	{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },
+	{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_IBS_US485_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PICPRO_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PCMCIA_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PK1_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_IBS_RS232MON_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_IBS_APP70_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLXM_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONMX_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2WI_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX3_PID) },
+	/*
+	 * ELV devices:
+	 */
+	{ USB_DEVICE(FTDI_ELV_VID, FTDI_ELV_WS300_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_PALMSENS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_IVIUM_XSTAT_PID) },
+	{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
+	{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
+	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
+	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) },
+	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) },
+	{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
+	{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
+	{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
+	{ USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
+	{ USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
+	{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
+	{ USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
+	{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
+	{ USB_DEVICE(MITSUBISHI_VID, MITSUBISHI_FXUSB_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_USOPTL4_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_USPTL4_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_2_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR2_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_485USB9F_2W_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_485USB9F_4W_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_232USB9M_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_485USBTB_2W_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_485USBTB_4W_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_TTL5USB9M_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_TTL3USB9M_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_ZZ_PROG1_USB_PID) },
+	{ USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) },
+	{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) },
+	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
+	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
+	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
+	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) },
+	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) },
+	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
+	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
+	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_MTIUSBCONVERTER_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
+	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
+	{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
+	{ USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
+	{ USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16IC_PID) },
+	{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) },
+	{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
+	{ USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
+	{ USB_DEVICE(TESTO_VID, TESTO_1_PID) },
+	{ USB_DEVICE(TESTO_VID, TESTO_3_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
+	{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+	{ USB_DEVICE(NOVITUS_VID, NOVITUS_BONO_E_PID) },
+	{ USB_DEVICE(FTDI_VID, RTSYSTEMS_USB_VX8_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57B_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29A_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29B_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29F_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_62B_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S01_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_63_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29C_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_81B_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_82B_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K5D_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K4Y_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K5G_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S05_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_60_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_61_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_62_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_63B_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_64_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_65_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_92_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_92D_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_W5R_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_A5R_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_PW1_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
+	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
+	{ USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_H_PID, 1) },
+	{ USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
+	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_SCU18) },
+	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
+
+	/* Papouch devices based on FTDI chip */
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_2_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_2_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_2_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485S_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485C_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_LEC_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB232_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_IRAMP_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK5_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO8x8_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x2_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO10x1_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO30x3_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO60x3_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x16_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO3x32_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK6_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_UPSUSB_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_MU_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SIMUKEY_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMUX_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMSR_PID) },
+
+	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
+	{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
+	{ USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
+	{ USB_DEVICE(ATMEL_VID, STK541_PID) },
+	{ USB_DEVICE(DE_VID, STB_PID) },
+	{ USB_DEVICE(DE_VID, WHT_PID) },
+	{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
+					USB_CLASS_VENDOR_SPEC,
+					USB_SUBCLASS_VENDOR_SPEC, 0x00) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ACTEL_VID, MICROSEMI_ARROW_SF2PLUS_BOARD_PID, 2) },
+	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
+	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
+	{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+	{ USB_DEVICE(FTDI_VID, PI_C865_PID) },
+	{ USB_DEVICE(FTDI_VID, PI_C857_PID) },
+	{ USB_DEVICE(PI_VID, PI_C866_PID) },
+	{ USB_DEVICE(PI_VID, PI_C663_PID) },
+	{ USB_DEVICE(PI_VID, PI_C725_PID) },
+	{ USB_DEVICE(PI_VID, PI_E517_PID) },
+	{ USB_DEVICE(PI_VID, PI_C863_PID) },
+	{ USB_DEVICE(PI_VID, PI_E861_PID) },
+	{ USB_DEVICE(PI_VID, PI_C867_PID) },
+	{ USB_DEVICE(PI_VID, PI_E609_PID) },
+	{ USB_DEVICE(PI_VID, PI_E709_PID) },
+	{ USB_DEVICE(PI_VID, PI_100F_PID) },
+	{ USB_DEVICE(PI_VID, PI_1011_PID) },
+	{ USB_DEVICE(PI_VID, PI_1012_PID) },
+	{ USB_DEVICE(PI_VID, PI_1013_PID) },
+	{ USB_DEVICE(PI_VID, PI_1014_PID) },
+	{ USB_DEVICE(PI_VID, PI_1015_PID) },
+	{ USB_DEVICE(PI_VID, PI_1016_PID) },
+	{ USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
+	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
+	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, TI_XDS100V2_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
+	{ USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
+	{ USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
+	{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
+	{ USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
+	{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
+	{ USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
+	{ USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
+	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
+	{ USB_DEVICE(FTDI_VID, ACCESIO_COM4SM_PID) },
+	{ USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_24_MASTER_WING_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_PC_WING_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_USB_DMX_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MIDI_TIMECODE_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MINI_WING_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MAXI_WING_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MEDIA_WING_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_WING_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_FHE_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
+	{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(ST_VID, ST_STMCLT_2232_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(ST_VID, ST_STMCLT_4232_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
+	/* Crucible Devices */
+	{ USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) },
+	/* Cressi Devices */
+	{ USB_DEVICE(FTDI_VID, FTDI_CRESSI_PID) },
+	/* Brainboxes Devices */
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_001_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_012_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_023_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_034_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_101_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_159_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_3_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_4_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_5_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_6_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_7_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_8_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_235_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_257_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_3_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_4_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_313_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_320_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_324_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_357_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_3_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_701_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_701_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_3_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) },
+	/* ekey Devices */
+	{ USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) },
+	/* Infineon Devices */
+	{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC1798_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC2X7_PID, 1) },
+	/* GE Healthcare devices */
+	{ USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
+	/* Active Research (Actisense) devices */
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_NDC_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_USG_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_NGT_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_NGW_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_UID_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_USA_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_NGX_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AF_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEAGAUGE_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASWITCH_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_NMEA2000_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ETHERNET_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_WIFI_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) },
+	/* Belimo Automation devices */
+	{ USB_DEVICE(FTDI_VID, BELIMO_ZTH_PID) },
+	{ USB_DEVICE(FTDI_VID, BELIMO_ZIP_PID) },
+	/* ICP DAS I-756xU devices */
+	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) },
+	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
+	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) },
+	{ USB_DEVICE(WICED_VID, WICED_USB20706V2_PID) },
+	{ USB_DEVICE(TI_VID, TI_CC3200_LAUNCHPAD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_BT_USB_PID) },
+	{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_WL_USB_PID) },
+	{ USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) },
+	/* EZPrototypes devices */
+	{ USB_DEVICE(EZPROTOTYPES_VID, HJELMSLUND_USB485_ISO_PID) },
+	{ USB_DEVICE_INTERFACE_NUMBER(UNJO_VID, UNJO_ISODEBUG_V1_PID, 1) },
+	/* Sienna devices */
+	{ USB_DEVICE(FTDI_VID, FTDI_SIENNA_PID) },
+	{ USB_DEVICE(ECHELON_VID, ECHELON_U20_PID) },
+	/* IDS GmbH devices */
+	{ USB_DEVICE(IDS_VID, IDS_SI31A_PID) },
+	{ USB_DEVICE(IDS_VID, IDS_CM31A_PID) },
+	/* Omron devices */
+	{ USB_DEVICE(OMRON_VID, OMRON_CS1W_CIF31_PID) },
+	/* U-Blox devices */
+	{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) },
+	{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
+	/* FreeCalypso USB adapters */
+	{ USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_BUF_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_UNBUF_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ }					/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table_combined);
+
+static const char *ftdi_chip_name[] = {
+	[SIO]		= "SIO",	/* the serial part of FT8U100AX */
+	[FT232A]	= "FT232A",
+	[FT232B]	= "FT232B",
+	[FT2232C]	= "FT2232C/D",
+	[FT232R]	= "FT232R",
+	[FT232H]	= "FT232H",
+	[FT2232H]	= "FT2232H",
+	[FT4232H]	= "FT4232H",
+	[FT4232HA]	= "FT4232HA",
+	[FT232HP]	= "FT232HP",
+	[FT233HP]	= "FT233HP",
+	[FT2232HP]	= "FT2232HP",
+	[FT2233HP]	= "FT2233HP",
+	[FT4232HP]	= "FT4232HP",
+	[FT4233HP]	= "FT4233HP",
+	[FTX]		= "FT-X",
+};
+
+
+/* Used for TIOCMIWAIT */
+#define FTDI_STATUS_B0_MASK	(FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
+#define FTDI_STATUS_B1_MASK	(FTDI_RS_BI)
+/* End TIOCMIWAIT */
+
+static void ftdi_set_termios(struct tty_struct *tty,
+			     struct usb_serial_port *port,
+			     const struct ktermios *old_termios);
+static int ftdi_get_modem_status(struct usb_serial_port *port,
+						unsigned char status[2]);
+
+#define WDR_TIMEOUT 5000 /* default urb timeout */
+#define WDR_SHORT_TIMEOUT 1000	/* shorter urb timeout */
+
+/*
+ * ***************************************************************************
+ * Utility functions
+ * ***************************************************************************
+ */
+
+static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base)
+{
+	unsigned short int divisor;
+	/* divisor shifted 3 bits to the left */
+	int divisor3 = DIV_ROUND_CLOSEST(base, 2 * baud);
+	if ((divisor3 & 0x7) == 7)
+		divisor3++; /* round x.7/8 up to x+1 */
+	divisor = divisor3 >> 3;
+	divisor3 &= 0x7;
+	if (divisor3 == 1)
+		divisor |= 0xc000;	/* +0.125 */
+	else if (divisor3 >= 4)
+		divisor |= 0x4000;	/* +0.5 */
+	else if (divisor3 != 0)
+		divisor |= 0x8000;	/* +0.25 */
+	else if (divisor == 1)
+		divisor = 0;		/* special case for maximum baud rate */
+	return divisor;
+}
+
+static unsigned short int ftdi_232am_baud_to_divisor(int baud)
+{
+	 return ftdi_232am_baud_base_to_divisor(baud, 48000000);
+}
+
+static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
+{
+	static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
+	u32 divisor;
+	/* divisor shifted 3 bits to the left */
+	int divisor3 = DIV_ROUND_CLOSEST(base, 2 * baud);
+	divisor = divisor3 >> 3;
+	divisor |= (u32)divfrac[divisor3 & 0x7] << 14;
+	/* Deal with special cases for highest baud rates. */
+	if (divisor == 1)		/* 1.0 */
+		divisor = 0;
+	else if (divisor == 0x4001)	/* 1.5 */
+		divisor = 1;
+	return divisor;
+}
+
+static u32 ftdi_232bm_baud_to_divisor(int baud)
+{
+	 return ftdi_232bm_baud_base_to_divisor(baud, 48000000);
+}
+
+static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
+{
+	static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
+	u32 divisor;
+	int divisor3;
+
+	/* hi-speed baud rate is 10-bit sampling instead of 16-bit */
+	divisor3 = DIV_ROUND_CLOSEST(8 * base, 10 * baud);
+
+	divisor = divisor3 >> 3;
+	divisor |= (u32)divfrac[divisor3 & 0x7] << 14;
+	/* Deal with special cases for highest baud rates. */
+	if (divisor == 1)		/* 1.0 */
+		divisor = 0;
+	else if (divisor == 0x4001)	/* 1.5 */
+		divisor = 1;
+	/*
+	 * Set this bit to turn off a divide by 2.5 on baud rate generator
+	 * This enables baud rates up to 12Mbaud but cannot reach below 1200
+	 * baud with this bit set
+	 */
+	divisor |= 0x00020000;
+	return divisor;
+}
+
+static u32 ftdi_2232h_baud_to_divisor(int baud)
+{
+	 return ftdi_2232h_baud_base_to_divisor(baud, 120000000);
+}
+
+#define set_mctrl(port, set)		update_mctrl((port), (set), 0)
+#define clear_mctrl(port, clear)	update_mctrl((port), 0, (clear))
+
+static int update_mctrl(struct usb_serial_port *port, unsigned int set,
+							unsigned int clear)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct device *dev = &port->dev;
+	unsigned value;
+	int rv;
+
+	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
+		dev_dbg(dev, "%s - DTR|RTS not being set|cleared\n", __func__);
+		return 0;	/* no change */
+	}
+
+	clear &= ~set;	/* 'set' takes precedence over 'clear' */
+	value = 0;
+	if (clear & TIOCM_DTR)
+		value |= FTDI_SIO_SET_DTR_LOW;
+	if (clear & TIOCM_RTS)
+		value |= FTDI_SIO_SET_RTS_LOW;
+	if (set & TIOCM_DTR)
+		value |= FTDI_SIO_SET_DTR_HIGH;
+	if (set & TIOCM_RTS)
+		value |= FTDI_SIO_SET_RTS_HIGH;
+	rv = usb_control_msg(port->serial->dev,
+			       usb_sndctrlpipe(port->serial->dev, 0),
+			       FTDI_SIO_SET_MODEM_CTRL_REQUEST,
+			       FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
+			       value, priv->channel,
+			       NULL, 0, WDR_TIMEOUT);
+	if (rv < 0) {
+		dev_dbg(dev, "%s Error from MODEM_CTRL urb: DTR %s, RTS %s\n",
+			__func__,
+			(set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged",
+			(set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged");
+		rv = usb_translate_errors(rv);
+	} else {
+		dev_dbg(dev, "%s - DTR %s, RTS %s\n", __func__,
+			(set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged",
+			(set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged");
+		/* FIXME: locking on last_dtr_rts */
+		priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set;
+	}
+	return rv;
+}
+
+
+static u32 get_ftdi_divisor(struct tty_struct *tty,
+						struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct device *dev = &port->dev;
+	u32 div_value = 0;
+	int div_okay = 1;
+	int baud;
+
+	baud = tty_get_baud_rate(tty);
+	dev_dbg(dev, "%s - tty_get_baud_rate reports speed %d\n", __func__, baud);
+
+	/*
+	 * Observe deprecated async-compatible custom_divisor hack, update
+	 * baudrate if needed.
+	 */
+	if (baud == 38400 &&
+	    ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
+	     (priv->custom_divisor)) {
+		baud = priv->baud_base / priv->custom_divisor;
+		dev_dbg(dev, "%s - custom divisor %d sets baud rate to %d\n",
+			__func__, priv->custom_divisor, baud);
+	}
+
+	if (!baud)
+		baud = 9600;
+	switch (priv->chip_type) {
+	case SIO:
+		switch (baud) {
+		case 300: div_value = ftdi_sio_b300; break;
+		case 600: div_value = ftdi_sio_b600; break;
+		case 1200: div_value = ftdi_sio_b1200; break;
+		case 2400: div_value = ftdi_sio_b2400; break;
+		case 4800: div_value = ftdi_sio_b4800; break;
+		case 9600: div_value = ftdi_sio_b9600; break;
+		case 19200: div_value = ftdi_sio_b19200; break;
+		case 38400: div_value = ftdi_sio_b38400; break;
+		case 57600: div_value = ftdi_sio_b57600;  break;
+		case 115200: div_value = ftdi_sio_b115200; break;
+		default:
+			dev_dbg(dev, "%s - Baudrate (%d) requested is not supported\n",
+				__func__,  baud);
+			div_value = ftdi_sio_b9600;
+			baud = 9600;
+			div_okay = 0;
+		}
+		break;
+	case FT232A:
+		if (baud <= 3000000) {
+			div_value = ftdi_232am_baud_to_divisor(baud);
+		} else {
+			dev_dbg(dev, "%s - Baud rate too high!\n", __func__);
+			baud = 9600;
+			div_value = ftdi_232am_baud_to_divisor(9600);
+			div_okay = 0;
+		}
+		break;
+	case FT232B:
+	case FT2232C:
+	case FT232R:
+	case FTX:
+		if (baud <= 3000000) {
+			u16 product_id = le16_to_cpu(
+				port->serial->dev->descriptor.idProduct);
+			if (((product_id == FTDI_NDI_HUC_PID)		||
+			     (product_id == FTDI_NDI_SPECTRA_SCU_PID)	||
+			     (product_id == FTDI_NDI_FUTURE_2_PID)	||
+			     (product_id == FTDI_NDI_FUTURE_3_PID)	||
+			     (product_id == FTDI_NDI_AURORA_SCU_PID))	&&
+			    (baud == 19200)) {
+				baud = 1200000;
+			}
+			div_value = ftdi_232bm_baud_to_divisor(baud);
+		} else {
+			dev_dbg(dev, "%s - Baud rate too high!\n", __func__);
+			div_value = ftdi_232bm_baud_to_divisor(9600);
+			div_okay = 0;
+			baud = 9600;
+		}
+		break;
+	default:
+		if ((baud <= 12000000) && (baud >= 1200)) {
+			div_value = ftdi_2232h_baud_to_divisor(baud);
+		} else if (baud < 1200) {
+			div_value = ftdi_232bm_baud_to_divisor(baud);
+		} else {
+			dev_dbg(dev, "%s - Baud rate too high!\n", __func__);
+			div_value = ftdi_232bm_baud_to_divisor(9600);
+			div_okay = 0;
+			baud = 9600;
+		}
+		break;
+	}
+
+	if (div_okay) {
+		dev_dbg(dev, "%s - Baud rate set to %d (divisor 0x%lX) on chip %s\n",
+			__func__, baud, (unsigned long)div_value,
+			ftdi_chip_name[priv->chip_type]);
+	}
+
+	tty_encode_baud_rate(tty, baud, baud);
+	return div_value;
+}
+
+static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	u16 value;
+	u16 index;
+	u32 index_value;
+	int rv;
+
+	index_value = get_ftdi_divisor(tty, port);
+	value = (u16)index_value;
+	index = (u16)(index_value >> 16);
+	if (priv->channel)
+		index = (u16)((index << 8) | priv->channel);
+
+	rv = usb_control_msg(port->serial->dev,
+			    usb_sndctrlpipe(port->serial->dev, 0),
+			    FTDI_SIO_SET_BAUDRATE_REQUEST,
+			    FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
+			    value, index,
+			    NULL, 0, WDR_SHORT_TIMEOUT);
+	return rv;
+}
+
+static int write_latency_timer(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *udev = port->serial->dev;
+	int rv;
+	int l = priv->latency;
+
+	if (priv->chip_type == SIO || priv->chip_type == FT232A)
+		return -EINVAL;
+
+	if (priv->flags & ASYNC_LOW_LATENCY)
+		l = 1;
+
+	dev_dbg(&port->dev, "%s: setting latency timer = %i\n", __func__, l);
+
+	rv = usb_control_msg(udev,
+			     usb_sndctrlpipe(udev, 0),
+			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+			     l, priv->channel,
+			     NULL, 0, WDR_TIMEOUT);
+	if (rv < 0)
+		dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
+	return rv;
+}
+
+static int _read_latency_timer(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *udev = port->serial->dev;
+	u8 buf;
+	int rv;
+
+	rv = usb_control_msg_recv(udev, 0, FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
+				  FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, 0,
+				  priv->channel, &buf, 1, WDR_TIMEOUT,
+				  GFP_KERNEL);
+	if (rv == 0)
+		rv = buf;
+
+	return rv;
+}
+
+static int read_latency_timer(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	int rv;
+
+	if (priv->chip_type == SIO || priv->chip_type == FT232A)
+		return -EINVAL;
+
+	rv = _read_latency_timer(port);
+	if (rv < 0) {
+		dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
+		return rv;
+	}
+
+	priv->latency = rv;
+
+	return 0;
+}
+
+static void get_serial_info(struct tty_struct *tty, struct serial_struct *ss)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+	ss->flags = priv->flags;
+	ss->baud_base = priv->baud_base;
+	ss->custom_divisor = priv->custom_divisor;
+}
+
+static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	int old_flags, old_divisor;
+
+	mutex_lock(&priv->cfg_lock);
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		if ((ss->flags ^ priv->flags) & ~ASYNC_USR_MASK) {
+			mutex_unlock(&priv->cfg_lock);
+			return -EPERM;
+		}
+	}
+
+	old_flags = priv->flags;
+	old_divisor = priv->custom_divisor;
+
+	priv->flags = ss->flags & ASYNC_FLAGS;
+	priv->custom_divisor = ss->custom_divisor;
+
+	write_latency_timer(port);
+
+	if ((priv->flags ^ old_flags) & ASYNC_SPD_MASK ||
+			((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
+			 priv->custom_divisor != old_divisor)) {
+
+		/* warn about deprecation unless clearing */
+		if (priv->flags & ASYNC_SPD_MASK)
+			dev_warn_ratelimited(&port->dev, "use of SPD flags is deprecated\n");
+
+		change_speed(tty, port);
+	}
+	mutex_unlock(&priv->cfg_lock);
+	return 0;
+}
+
+static int get_lsr_info(struct usb_serial_port *port,
+			unsigned int __user *retinfo)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	unsigned int result = 0;
+
+	if (priv->transmit_empty)
+		result = TIOCSER_TEMT;
+
+	if (copy_to_user(retinfo, &result, sizeof(unsigned int)))
+		return -EFAULT;
+	return 0;
+}
+
+static int ftdi_determine_type(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	struct usb_device *udev = serial->dev;
+	unsigned int version, ifnum;
+
+	version = le16_to_cpu(udev->descriptor.bcdDevice);
+	ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+
+	/* Assume Hi-Speed type */
+	priv->baud_base = 120000000 / 2;
+	priv->channel = CHANNEL_A + ifnum;
+
+	switch (version) {
+	case 0x200:
+		priv->chip_type = FT232A;
+		priv->baud_base = 48000000 / 2;
+		priv->channel = 0;
+		/*
+		 * FT232B devices have a bug where bcdDevice gets set to 0x200
+		 * when iSerialNumber is 0. Assume it is an FT232B in case the
+		 * latency timer is readable.
+		 */
+		if (udev->descriptor.iSerialNumber == 0 &&
+				_read_latency_timer(port) >= 0) {
+			priv->chip_type = FT232B;
+		}
+		break;
+	case 0x400:
+		priv->chip_type = FT232B;
+		priv->baud_base = 48000000 / 2;
+		priv->channel = 0;
+		break;
+	case 0x500:
+		priv->chip_type = FT2232C;
+		priv->baud_base = 48000000 / 2;
+		break;
+	case 0x600:
+		priv->chip_type = FT232R;
+		priv->baud_base = 48000000 / 2;
+		priv->channel = 0;
+		break;
+	case 0x700:
+		priv->chip_type = FT2232H;
+		break;
+	case 0x800:
+		priv->chip_type = FT4232H;
+		break;
+	case 0x900:
+		priv->chip_type = FT232H;
+		break;
+	case 0x1000:
+		priv->chip_type = FTX;
+		priv->baud_base = 48000000 / 2;
+		break;
+	case 0x2800:
+		priv->chip_type = FT2233HP;
+		break;
+	case 0x2900:
+		priv->chip_type = FT4233HP;
+		break;
+	case 0x3000:
+		priv->chip_type = FT2232HP;
+		break;
+	case 0x3100:
+		priv->chip_type = FT4232HP;
+		break;
+	case 0x3200:
+		priv->chip_type = FT233HP;
+		break;
+	case 0x3300:
+		priv->chip_type = FT232HP;
+		break;
+	case 0x3600:
+		priv->chip_type = FT4232HA;
+		break;
+	default:
+		if (version < 0x200) {
+			priv->chip_type = SIO;
+			priv->baud_base = 12000000 / 16;
+			priv->channel = 0;
+		} else {
+			dev_err(&port->dev, "unknown device type: 0x%02x\n", version);
+			return -ENODEV;
+		}
+	}
+
+	dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
+
+	return 0;
+}
+
+
+/*
+ * Determine the maximum packet size for the device. This depends on the chip
+ * type and the USB host capabilities. The value should be obtained from the
+ * device descriptor as the chip will use the appropriate values for the host.
+ */
+static void ftdi_set_max_packet_size(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_interface *interface = port->serial->interface;
+	struct usb_endpoint_descriptor *ep_desc;
+	unsigned num_endpoints;
+	unsigned i;
+
+	num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
+	if (!num_endpoints)
+		return;
+
+	/*
+	 * NOTE: Some customers have programmed FT232R/FT245R devices
+	 * with an endpoint size of 0 - not good. In this case, we
+	 * want to override the endpoint descriptor setting and use a
+	 * value of 64 for wMaxPacketSize.
+	 */
+	for (i = 0; i < num_endpoints; i++) {
+		ep_desc = &interface->cur_altsetting->endpoint[i].desc;
+		if (!ep_desc->wMaxPacketSize) {
+			ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
+			dev_warn(&port->dev, "Overriding wMaxPacketSize on endpoint %d\n",
+					usb_endpoint_num(ep_desc));
+		}
+	}
+
+	/* Set max packet size based on last descriptor. */
+	priv->max_packet_size = usb_endpoint_maxp(ep_desc);
+}
+
+
+/*
+ * ***************************************************************************
+ * Sysfs Attribute
+ * ***************************************************************************
+ */
+
+static ssize_t latency_timer_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct usb_serial_port *port = to_usb_serial_port(dev);
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	if (priv->flags & ASYNC_LOW_LATENCY)
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "%u\n", priv->latency);
+}
+
+/* Write a new value of the latency timer, in units of milliseconds. */
+static ssize_t latency_timer_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *valbuf, size_t count)
+{
+	struct usb_serial_port *port = to_usb_serial_port(dev);
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	u8 v;
+	int rv;
+
+	if (kstrtou8(valbuf, 10, &v))
+		return -EINVAL;
+
+	priv->latency = v;
+	rv = write_latency_timer(port);
+	if (rv < 0)
+		return -EIO;
+	return count;
+}
+static DEVICE_ATTR_RW(latency_timer);
+
+/* Write an event character directly to the FTDI register.  The ASCII
+   value is in the low 8 bits, with the enable bit in the 9th bit. */
+static ssize_t event_char_store(struct device *dev,
+	struct device_attribute *attr, const char *valbuf, size_t count)
+{
+	struct usb_serial_port *port = to_usb_serial_port(dev);
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *udev = port->serial->dev;
+	unsigned int v;
+	int rv;
+
+	if (kstrtouint(valbuf, 0, &v) || v >= 0x200)
+		return -EINVAL;
+
+	dev_dbg(&port->dev, "%s: setting event char = 0x%03x\n", __func__, v);
+
+	rv = usb_control_msg(udev,
+			     usb_sndctrlpipe(udev, 0),
+			     FTDI_SIO_SET_EVENT_CHAR_REQUEST,
+			     FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
+			     v, priv->channel,
+			     NULL, 0, WDR_TIMEOUT);
+	if (rv < 0) {
+		dev_dbg(&port->dev, "Unable to write event character: %i\n", rv);
+		return -EIO;
+	}
+
+	return count;
+}
+static DEVICE_ATTR_WO(event_char);
+
+static struct attribute *ftdi_attrs[] = {
+	&dev_attr_event_char.attr,
+	&dev_attr_latency_timer.attr,
+	NULL
+};
+
+static umode_t ftdi_is_visible(struct kobject *kobj, struct attribute *attr, int idx)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct usb_serial_port *port = to_usb_serial_port(dev);
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	enum ftdi_chip_type type = priv->chip_type;
+
+	if (attr == &dev_attr_event_char.attr) {
+		if (type == SIO)
+			return 0;
+	}
+
+	if (attr == &dev_attr_latency_timer.attr) {
+		if (type == SIO || type == FT232A)
+			return 0;
+	}
+
+	return attr->mode;
+}
+
+static const struct attribute_group ftdi_group = {
+	.attrs		= ftdi_attrs,
+	.is_visible	= ftdi_is_visible,
+};
+
+static const struct attribute_group *ftdi_groups[] = {
+	&ftdi_group,
+	NULL
+};
+
+#ifdef CONFIG_GPIOLIB
+
+static int ftdi_set_bitmode(struct usb_serial_port *port, u8 mode)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	int result;
+	u16 val;
+
+	result = usb_autopm_get_interface(serial->interface);
+	if (result)
+		return result;
+
+	val = (mode << 8) | (priv->gpio_output << 4) | priv->gpio_value;
+	result = usb_control_msg(serial->dev,
+				 usb_sndctrlpipe(serial->dev, 0),
+				 FTDI_SIO_SET_BITMODE_REQUEST,
+				 FTDI_SIO_SET_BITMODE_REQUEST_TYPE, val,
+				 priv->channel, NULL, 0, WDR_TIMEOUT);
+	if (result < 0) {
+		dev_err(&serial->interface->dev,
+			"bitmode request failed for value 0x%04x: %d\n",
+			val, result);
+	}
+
+	usb_autopm_put_interface(serial->interface);
+
+	return result;
+}
+
+static int ftdi_set_cbus_pins(struct usb_serial_port *port)
+{
+	return ftdi_set_bitmode(port, FTDI_SIO_BITMODE_CBUS);
+}
+
+static int ftdi_exit_cbus_mode(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+	priv->gpio_output = 0;
+	priv->gpio_value = 0;
+	return ftdi_set_bitmode(port, FTDI_SIO_BITMODE_RESET);
+}
+
+static int ftdi_gpio_request(struct gpio_chip *gc, unsigned int offset)
+{
+	struct usb_serial_port *port = gpiochip_get_data(gc);
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	int result;
+
+	mutex_lock(&priv->gpio_lock);
+	if (!priv->gpio_used) {
+		/* Set default pin states, as we cannot get them from device */
+		priv->gpio_output = 0x00;
+		priv->gpio_value = 0x00;
+		result = ftdi_set_cbus_pins(port);
+		if (result) {
+			mutex_unlock(&priv->gpio_lock);
+			return result;
+		}
+
+		priv->gpio_used = true;
+	}
+	mutex_unlock(&priv->gpio_lock);
+
+	return 0;
+}
+
+static int ftdi_read_cbus_pins(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	u8 buf;
+	int result;
+
+	result = usb_autopm_get_interface(serial->interface);
+	if (result)
+		return result;
+
+	result = usb_control_msg_recv(serial->dev, 0,
+				      FTDI_SIO_READ_PINS_REQUEST,
+				      FTDI_SIO_READ_PINS_REQUEST_TYPE, 0,
+				      priv->channel, &buf, 1, WDR_TIMEOUT,
+				      GFP_KERNEL);
+	if (result == 0)
+		result = buf;
+
+	usb_autopm_put_interface(serial->interface);
+
+	return result;
+}
+
+static int ftdi_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct usb_serial_port *port = gpiochip_get_data(gc);
+	int result;
+
+	result = ftdi_read_cbus_pins(port);
+	if (result < 0)
+		return result;
+
+	return !!(result & BIT(gpio));
+}
+
+static void ftdi_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct usb_serial_port *port = gpiochip_get_data(gc);
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+	mutex_lock(&priv->gpio_lock);
+
+	if (value)
+		priv->gpio_value |= BIT(gpio);
+	else
+		priv->gpio_value &= ~BIT(gpio);
+
+	ftdi_set_cbus_pins(port);
+
+	mutex_unlock(&priv->gpio_lock);
+}
+
+static int ftdi_gpio_get_multiple(struct gpio_chip *gc, unsigned long *mask,
+					unsigned long *bits)
+{
+	struct usb_serial_port *port = gpiochip_get_data(gc);
+	int result;
+
+	result = ftdi_read_cbus_pins(port);
+	if (result < 0)
+		return result;
+
+	*bits = result & *mask;
+
+	return 0;
+}
+
+static void ftdi_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
+					unsigned long *bits)
+{
+	struct usb_serial_port *port = gpiochip_get_data(gc);
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+	mutex_lock(&priv->gpio_lock);
+
+	priv->gpio_value &= ~(*mask);
+	priv->gpio_value |= *bits & *mask;
+	ftdi_set_cbus_pins(port);
+
+	mutex_unlock(&priv->gpio_lock);
+}
+
+static int ftdi_gpio_direction_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct usb_serial_port *port = gpiochip_get_data(gc);
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+	return !(priv->gpio_output & BIT(gpio));
+}
+
+static int ftdi_gpio_direction_input(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct usb_serial_port *port = gpiochip_get_data(gc);
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	int result;
+
+	mutex_lock(&priv->gpio_lock);
+
+	priv->gpio_output &= ~BIT(gpio);
+	result = ftdi_set_cbus_pins(port);
+
+	mutex_unlock(&priv->gpio_lock);
+
+	return result;
+}
+
+static int ftdi_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio,
+					int value)
+{
+	struct usb_serial_port *port = gpiochip_get_data(gc);
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	int result;
+
+	mutex_lock(&priv->gpio_lock);
+
+	priv->gpio_output |= BIT(gpio);
+	if (value)
+		priv->gpio_value |= BIT(gpio);
+	else
+		priv->gpio_value &= ~BIT(gpio);
+
+	result = ftdi_set_cbus_pins(port);
+
+	mutex_unlock(&priv->gpio_lock);
+
+	return result;
+}
+
+static int ftdi_gpio_init_valid_mask(struct gpio_chip *gc,
+				     unsigned long *valid_mask,
+				     unsigned int ngpios)
+{
+	struct usb_serial_port *port = gpiochip_get_data(gc);
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	unsigned long map = priv->gpio_altfunc;
+
+	bitmap_complement(valid_mask, &map, ngpios);
+
+	if (bitmap_empty(valid_mask, ngpios))
+		dev_dbg(&port->dev, "no CBUS pin configured for GPIO\n");
+	else
+		dev_dbg(&port->dev, "CBUS%*pbl configured for GPIO\n", ngpios,
+			valid_mask);
+
+	return 0;
+}
+
+static int ftdi_read_eeprom(struct usb_serial *serial, void *dst, u16 addr,
+				u16 nbytes)
+{
+	int read = 0;
+
+	if (addr % 2 != 0)
+		return -EINVAL;
+	if (nbytes % 2 != 0)
+		return -EINVAL;
+
+	/* Read EEPROM two bytes at a time */
+	while (read < nbytes) {
+		int rv;
+
+		rv = usb_control_msg(serial->dev,
+				     usb_rcvctrlpipe(serial->dev, 0),
+				     FTDI_SIO_READ_EEPROM_REQUEST,
+				     FTDI_SIO_READ_EEPROM_REQUEST_TYPE,
+				     0, (addr + read) / 2, dst + read, 2,
+				     WDR_TIMEOUT);
+		if (rv < 2) {
+			if (rv >= 0)
+				return -EIO;
+			else
+				return rv;
+		}
+
+		read += rv;
+	}
+
+	return 0;
+}
+
+static int ftdi_gpio_init_ft232h(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	u16 cbus_config;
+	u8 *buf;
+	int ret;
+	int i;
+
+	buf = kmalloc(4, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = ftdi_read_eeprom(port->serial, buf, 0x1a, 4);
+	if (ret < 0)
+		goto out_free;
+
+	/*
+	 * FT232H CBUS Memory Map
+	 *
+	 * 0x1a: X- (upper nibble -> AC5)
+	 * 0x1b: -X (lower nibble -> AC6)
+	 * 0x1c: XX (upper nibble -> AC9 | lower nibble -> AC8)
+	 */
+	cbus_config = buf[2] << 8 | (buf[1] & 0xf) << 4 | (buf[0] & 0xf0) >> 4;
+
+	priv->gc.ngpio = 4;
+	priv->gpio_altfunc = 0xff;
+
+	for (i = 0; i < priv->gc.ngpio; ++i) {
+		if ((cbus_config & 0xf) == FTDI_FTX_CBUS_MUX_GPIO)
+			priv->gpio_altfunc &= ~BIT(i);
+		cbus_config >>= 4;
+	}
+
+out_free:
+	kfree(buf);
+
+	return ret;
+}
+
+static int ftdi_gpio_init_ft232r(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	u16 cbus_config;
+	u8 *buf;
+	int ret;
+	int i;
+
+	buf = kmalloc(2, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = ftdi_read_eeprom(port->serial, buf, 0x14, 2);
+	if (ret < 0)
+		goto out_free;
+
+	cbus_config = le16_to_cpup((__le16 *)buf);
+	dev_dbg(&port->dev, "cbus_config = 0x%04x\n", cbus_config);
+
+	priv->gc.ngpio = 4;
+
+	priv->gpio_altfunc = 0xff;
+	for (i = 0; i < priv->gc.ngpio; ++i) {
+		if ((cbus_config & 0xf) == FTDI_FT232R_CBUS_MUX_GPIO)
+			priv->gpio_altfunc &= ~BIT(i);
+		cbus_config >>= 4;
+	}
+out_free:
+	kfree(buf);
+
+	return ret;
+}
+
+static int ftdi_gpio_init_ftx(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	const u16 cbus_cfg_addr = 0x1a;
+	const u16 cbus_cfg_size = 4;
+	u8 *cbus_cfg_buf;
+	int result;
+	u8 i;
+
+	cbus_cfg_buf = kmalloc(cbus_cfg_size, GFP_KERNEL);
+	if (!cbus_cfg_buf)
+		return -ENOMEM;
+
+	result = ftdi_read_eeprom(serial, cbus_cfg_buf,
+				  cbus_cfg_addr, cbus_cfg_size);
+	if (result < 0)
+		goto out_free;
+
+	/* FIXME: FT234XD alone has 1 GPIO, but how to recognize this IC? */
+	priv->gc.ngpio = 4;
+
+	/* Determine which pins are configured for CBUS bitbanging */
+	priv->gpio_altfunc = 0xff;
+	for (i = 0; i < priv->gc.ngpio; ++i) {
+		if (cbus_cfg_buf[i] == FTDI_FTX_CBUS_MUX_GPIO)
+			priv->gpio_altfunc &= ~BIT(i);
+	}
+
+out_free:
+	kfree(cbus_cfg_buf);
+
+	return result;
+}
+
+static int ftdi_gpio_init(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	int result;
+
+	switch (priv->chip_type) {
+	case FT232H:
+		result = ftdi_gpio_init_ft232h(port);
+		break;
+	case FT232R:
+		result = ftdi_gpio_init_ft232r(port);
+		break;
+	case FTX:
+		result = ftdi_gpio_init_ftx(port);
+		break;
+	default:
+		return 0;
+	}
+
+	if (result < 0)
+		return result;
+
+	mutex_init(&priv->gpio_lock);
+
+	priv->gc.label = "ftdi-cbus";
+	priv->gc.request = ftdi_gpio_request;
+	priv->gc.get_direction = ftdi_gpio_direction_get;
+	priv->gc.direction_input = ftdi_gpio_direction_input;
+	priv->gc.direction_output = ftdi_gpio_direction_output;
+	priv->gc.init_valid_mask = ftdi_gpio_init_valid_mask;
+	priv->gc.get = ftdi_gpio_get;
+	priv->gc.set = ftdi_gpio_set;
+	priv->gc.get_multiple = ftdi_gpio_get_multiple;
+	priv->gc.set_multiple = ftdi_gpio_set_multiple;
+	priv->gc.owner = THIS_MODULE;
+	priv->gc.parent = &serial->interface->dev;
+	priv->gc.base = -1;
+	priv->gc.can_sleep = true;
+
+	result = gpiochip_add_data(&priv->gc, port);
+	if (!result)
+		priv->gpio_registered = true;
+
+	return result;
+}
+
+static void ftdi_gpio_remove(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+	if (priv->gpio_registered) {
+		gpiochip_remove(&priv->gc);
+		priv->gpio_registered = false;
+	}
+
+	if (priv->gpio_used) {
+		/* Exiting CBUS-mode does not reset pin states. */
+		ftdi_exit_cbus_mode(port);
+		priv->gpio_used = false;
+	}
+}
+
+#else
+
+static int ftdi_gpio_init(struct usb_serial_port *port)
+{
+	return 0;
+}
+
+static void ftdi_gpio_remove(struct usb_serial_port *port) { }
+
+#endif	/* CONFIG_GPIOLIB */
+
+/*
+ * ***************************************************************************
+ * FTDI driver specific functions
+ * ***************************************************************************
+ */
+
+static int ftdi_probe(struct usb_serial *serial, const struct usb_device_id *id)
+{
+	const struct ftdi_quirk *quirk = (struct ftdi_quirk *)id->driver_info;
+
+	if (quirk && quirk->probe) {
+		int ret = quirk->probe(serial);
+		if (ret != 0)
+			return ret;
+	}
+
+	usb_set_serial_data(serial, (void *)id->driver_info);
+
+	return 0;
+}
+
+static int ftdi_port_probe(struct usb_serial_port *port)
+{
+	const struct ftdi_quirk *quirk = usb_get_serial_data(port->serial);
+	struct ftdi_private *priv;
+	int result;
+
+	priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_init(&priv->cfg_lock);
+
+	if (quirk && quirk->port_probe)
+		quirk->port_probe(priv);
+
+	usb_set_serial_port_data(port, priv);
+
+	result = ftdi_determine_type(port);
+	if (result)
+		goto err_free;
+
+	ftdi_set_max_packet_size(port);
+	if (read_latency_timer(port) < 0)
+		priv->latency = 16;
+	write_latency_timer(port);
+
+	result = ftdi_gpio_init(port);
+	if (result < 0) {
+		dev_err(&port->serial->interface->dev,
+			"GPIO initialisation failed: %d\n",
+			result);
+	}
+
+	return 0;
+
+err_free:
+	kfree(priv);
+
+	return result;
+}
+
+/* Setup for the USB-UIRT device, which requires hardwired
+ * baudrate (38400 gets mapped to 312500) */
+/* Called from usbserial:serial_probe */
+static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
+{
+	priv->flags |= ASYNC_SPD_CUST;
+	priv->custom_divisor = 77;
+	priv->force_baud = 38400;
+}
+
+/* Setup for the HE-TIRA1 device, which requires hardwired
+ * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled.  */
+
+static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
+{
+	priv->flags |= ASYNC_SPD_CUST;
+	priv->custom_divisor = 240;
+	priv->force_baud = 38400;
+	priv->force_rtscts = 1;
+}
+
+/*
+ * Module parameter to control latency timer for NDI FTDI-based USB devices.
+ * If this value is not set in /etc/modprobe.d/ its value will be set
+ * to 1ms.
+ */
+static int ndi_latency_timer = 1;
+
+/* Setup for the NDI FTDI-based USB devices, which requires hardwired
+ * baudrate (19200 gets mapped to 1200000).
+ *
+ * Called from usbserial:serial_probe.
+ */
+static int ftdi_NDI_device_setup(struct usb_serial *serial)
+{
+	struct usb_device *udev = serial->dev;
+	int latency = ndi_latency_timer;
+
+	if (latency == 0)
+		latency = 1;
+	if (latency > 99)
+		latency = 99;
+
+	dev_dbg(&udev->dev, "%s setting NDI device latency to %d\n", __func__, latency);
+	dev_info(&udev->dev, "NDI device with a latency value of %d\n", latency);
+
+	/* FIXME: errors are not returned */
+	usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+				FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+				latency, 0, NULL, 0, WDR_TIMEOUT);
+	return 0;
+}
+
+/*
+ * First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko
+ * Neo1973 Debug Board is reserved for JTAG interface and can be accessed from
+ * userspace using openocd.
+ */
+static int ftdi_jtag_probe(struct usb_serial *serial)
+{
+	struct usb_interface *intf = serial->interface;
+	int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+
+	if (ifnum == 0) {
+		dev_info(&intf->dev, "Ignoring interface reserved for JTAG\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int ftdi_8u2232c_probe(struct usb_serial *serial)
+{
+	struct usb_device *udev = serial->dev;
+
+	if (udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems"))
+		return ftdi_jtag_probe(serial);
+
+	if (udev->product &&
+		(!strcmp(udev->product, "Arrow USB Blaster") ||
+		 !strcmp(udev->product, "BeagleBone/XDS100V2") ||
+		 !strcmp(udev->product, "SNAP Connect E10")))
+		return ftdi_jtag_probe(serial);
+
+	return 0;
+}
+
+/*
+ * First two ports on JTAG adaptors using an FT4232 such as STMicroelectronics's
+ * ST Micro Connect Lite are reserved for JTAG or other non-UART interfaces and
+ * can be accessed from userspace.
+ * The next two ports are enabled as UARTs by default, where port 2 is
+ * a conventional RS-232 UART.
+ */
+static int ftdi_stmclite_probe(struct usb_serial *serial)
+{
+	struct usb_interface *intf = serial->interface;
+	int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+
+	if (ifnum < 2) {
+		dev_info(&intf->dev, "Ignoring interface reserved for JTAG\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void ftdi_port_remove(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+	ftdi_gpio_remove(port);
+
+	kfree(priv);
+}
+
+static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_device *dev = port->serial->dev;
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+	/* No error checking for this (will get errors later anyway) */
+	/* See ftdi_sio.h for description of what is reset */
+	usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE,
+			FTDI_SIO_RESET_SIO,
+			priv->channel, NULL, 0, WDR_TIMEOUT);
+
+	/* Termios defaults are set by usb_serial_init. We don't change
+	   port->tty->termios - this would lose speed settings, etc.
+	   This is same behaviour as serial.c/rs_open() - Kuba */
+
+	/* ftdi_set_termios  will send usb control messages */
+	if (tty)
+		ftdi_set_termios(tty, port, NULL);
+
+	return usb_serial_generic_open(tty, port);
+}
+
+static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+	/* Disable flow control */
+	if (!on) {
+		if (usb_control_msg(port->serial->dev,
+			    usb_sndctrlpipe(port->serial->dev, 0),
+			    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
+			    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
+			    0, priv->channel, NULL, 0,
+			    WDR_TIMEOUT) < 0) {
+			dev_err(&port->dev, "error from flowcontrol urb\n");
+		}
+	}
+	/* drop RTS and DTR */
+	if (on)
+		set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+	else
+		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+}
+
+/* The SIO requires the first byte to have:
+ *  B0 1
+ *  B1 0
+ *  B2..7 length of message excluding byte 0
+ *
+ * The new devices do not require this byte
+ */
+static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
+{
+	struct ftdi_private *priv;
+	int count;
+	unsigned long flags;
+
+	priv = usb_get_serial_port_data(port);
+
+	if (priv->chip_type == SIO) {
+		unsigned char *buffer = dest;
+		int i, len, c;
+
+		count = 0;
+		spin_lock_irqsave(&port->lock, flags);
+		for (i = 0; i < size - 1; i += priv->max_packet_size) {
+			len = min_t(int, size - i, priv->max_packet_size) - 1;
+			c = kfifo_out(&port->write_fifo, &buffer[i + 1], len);
+			if (!c)
+				break;
+			port->icount.tx += c;
+			buffer[i] = (c << 2) + 1;
+			count += c + 1;
+		}
+		spin_unlock_irqrestore(&port->lock, flags);
+	} else {
+		count = kfifo_out_locked(&port->write_fifo, dest, size,
+								&port->lock);
+		port->icount.tx += count;
+	}
+
+	return count;
+}
+
+#define FTDI_RS_ERR_MASK (FTDI_RS_BI | FTDI_RS_PE | FTDI_RS_FE | FTDI_RS_OE)
+
+static int ftdi_process_packet(struct usb_serial_port *port,
+		struct ftdi_private *priv, unsigned char *buf, int len)
+{
+	unsigned char status;
+	bool brkint = false;
+	int i;
+	char flag;
+
+	if (len < 2) {
+		dev_dbg(&port->dev, "malformed packet\n");
+		return 0;
+	}
+
+	/* Compare new line status to the old one, signal if different/
+	   N.B. packet may be processed more than once, but differences
+	   are only processed once.  */
+	status = buf[0] & FTDI_STATUS_B0_MASK;
+	if (status != priv->prev_status) {
+		char diff_status = status ^ priv->prev_status;
+
+		if (diff_status & FTDI_RS0_CTS)
+			port->icount.cts++;
+		if (diff_status & FTDI_RS0_DSR)
+			port->icount.dsr++;
+		if (diff_status & FTDI_RS0_RI)
+			port->icount.rng++;
+		if (diff_status & FTDI_RS0_RLSD) {
+			struct tty_struct *tty;
+
+			port->icount.dcd++;
+			tty = tty_port_tty_get(&port->port);
+			if (tty)
+				usb_serial_handle_dcd_change(port, tty,
+						status & FTDI_RS0_RLSD);
+			tty_kref_put(tty);
+		}
+
+		wake_up_interruptible(&port->port.delta_msr_wait);
+		priv->prev_status = status;
+	}
+
+	/* save if the transmitter is empty or not */
+	if (buf[1] & FTDI_RS_TEMT)
+		priv->transmit_empty = 1;
+	else
+		priv->transmit_empty = 0;
+
+	if (len == 2)
+		return 0;	/* status only */
+
+	/*
+	 * Break and error status must only be processed for packets with
+	 * data payload to avoid over-reporting.
+	 */
+	flag = TTY_NORMAL;
+	if (buf[1] & FTDI_RS_ERR_MASK) {
+		/*
+		 * Break takes precedence over parity, which takes precedence
+		 * over framing errors. Note that break is only associated
+		 * with the last character in the buffer and only when it's a
+		 * NUL.
+		 */
+		if (buf[1] & FTDI_RS_BI && buf[len - 1] == '\0') {
+			port->icount.brk++;
+			brkint = true;
+		}
+		if (buf[1] & FTDI_RS_PE) {
+			flag = TTY_PARITY;
+			port->icount.parity++;
+		} else if (buf[1] & FTDI_RS_FE) {
+			flag = TTY_FRAME;
+			port->icount.frame++;
+		}
+		/* Overrun is special, not associated with a char */
+		if (buf[1] & FTDI_RS_OE) {
+			port->icount.overrun++;
+			tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
+		}
+	}
+
+	port->icount.rx += len - 2;
+
+	if (brkint || port->sysrq) {
+		for (i = 2; i < len; i++) {
+			if (brkint && i == len - 1) {
+				if (usb_serial_handle_break(port))
+					return len - 3;
+				flag = TTY_BREAK;
+			}
+			if (usb_serial_handle_sysrq_char(port, buf[i]))
+				continue;
+			tty_insert_flip_char(&port->port, buf[i], flag);
+		}
+	} else {
+		tty_insert_flip_string_fixed_flag(&port->port, buf + 2, flag,
+				len - 2);
+	}
+
+	return len - 2;
+}
+
+static void ftdi_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	char *data = urb->transfer_buffer;
+	int i;
+	int len;
+	int count = 0;
+
+	for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
+		len = min_t(int, urb->actual_length - i, priv->max_packet_size);
+		count += ftdi_process_packet(port, priv, &data[i], len);
+	}
+
+	if (count)
+		tty_flip_buffer_push(&port->port);
+}
+
+static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	u16 value;
+
+	/* break_state = -1 to turn on break, and 0 to turn off break */
+	/* see drivers/char/tty_io.c to see it used */
+	/* last_set_data_value NEVER has the break bit set in it */
+
+	if (break_state)
+		value = priv->last_set_data_value | FTDI_SIO_SET_BREAK;
+	else
+		value = priv->last_set_data_value;
+
+	if (usb_control_msg(port->serial->dev,
+			usb_sndctrlpipe(port->serial->dev, 0),
+			FTDI_SIO_SET_DATA_REQUEST,
+			FTDI_SIO_SET_DATA_REQUEST_TYPE,
+			value, priv->channel,
+			NULL, 0, WDR_TIMEOUT) < 0) {
+		dev_err(&port->dev, "%s FAILED to enable/disable break state (state was %d)\n",
+			__func__, break_state);
+	}
+
+	dev_dbg(&port->dev, "%s break state is %d - urb is %d\n", __func__,
+		break_state, value);
+
+}
+
+static bool ftdi_tx_empty(struct usb_serial_port *port)
+{
+	unsigned char buf[2];
+	int ret;
+
+	ret = ftdi_get_modem_status(port, buf);
+	if (ret == 2) {
+		if (!(buf[1] & FTDI_RS_TEMT))
+			return false;
+	}
+
+	return true;
+}
+
+/* old_termios contains the original termios settings and tty->termios contains
+ * the new setting to be used
+ * WARNING: set_termios calls this with old_termios in kernel space
+ */
+static void ftdi_set_termios(struct tty_struct *tty,
+		             struct usb_serial_port *port,
+		             const struct ktermios *old_termios)
+{
+	struct usb_device *dev = port->serial->dev;
+	struct device *ddev = &port->dev;
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct ktermios *termios = &tty->termios;
+	unsigned int cflag = termios->c_cflag;
+	u16 value, index;
+	int ret;
+
+	/* Force baud rate if this device requires it, unless it is set to
+	   B0. */
+	if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
+		dev_dbg(ddev, "%s: forcing baud rate for this device\n", __func__);
+		tty_encode_baud_rate(tty, priv->force_baud,
+					priv->force_baud);
+	}
+
+	/* Force RTS-CTS if this device requires it. */
+	if (priv->force_rtscts) {
+		dev_dbg(ddev, "%s: forcing rtscts for this device\n", __func__);
+		termios->c_cflag |= CRTSCTS;
+	}
+
+	/*
+	 * All FTDI UART chips are limited to CS7/8. We shouldn't pretend to
+	 * support CS5/6 and revert the CSIZE setting instead.
+	 *
+	 * CS5 however is used to control some smartcard readers which abuse
+	 * this limitation to switch modes. Original FTDI chips fall back to
+	 * eight data bits.
+	 *
+	 * TODO: Implement a quirk to only allow this with mentioned
+	 *       readers. One I know of (Argolis Smartreader V1)
+	 *       returns "USB smartcard server" as iInterface string.
+	 *       The vendor didn't bother with a custom VID/PID of
+	 *       course.
+	 */
+	if (C_CSIZE(tty) == CS6) {
+		dev_warn(ddev, "requested CSIZE setting not supported\n");
+
+		termios->c_cflag &= ~CSIZE;
+		if (old_termios)
+			termios->c_cflag |= old_termios->c_cflag & CSIZE;
+		else
+			termios->c_cflag |= CS8;
+	}
+
+	cflag = termios->c_cflag;
+
+	if (!old_termios)
+		goto no_skip;
+
+	if (old_termios->c_cflag == termios->c_cflag
+	    && old_termios->c_ispeed == termios->c_ispeed
+	    && old_termios->c_ospeed == termios->c_ospeed)
+		goto no_c_cflag_changes;
+
+	/* NOTE These routines can get interrupted by
+	   ftdi_sio_read_bulk_callback  - need to examine what this means -
+	   don't see any problems yet */
+
+	if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) ==
+	    (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)))
+		goto no_data_parity_stop_changes;
+
+no_skip:
+	/* Set number of data bits, parity, stop bits */
+
+	value = 0;
+	value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 :
+			FTDI_SIO_SET_DATA_STOP_BITS_1);
+	if (cflag & PARENB) {
+		if (cflag & CMSPAR)
+			value |= cflag & PARODD ?
+					FTDI_SIO_SET_DATA_PARITY_MARK :
+					FTDI_SIO_SET_DATA_PARITY_SPACE;
+		else
+			value |= cflag & PARODD ?
+					FTDI_SIO_SET_DATA_PARITY_ODD :
+					FTDI_SIO_SET_DATA_PARITY_EVEN;
+	} else {
+		value |= FTDI_SIO_SET_DATA_PARITY_NONE;
+	}
+	switch (cflag & CSIZE) {
+	case CS5:
+		dev_dbg(ddev, "Setting CS5 quirk\n");
+		break;
+	case CS7:
+		value |= 7;
+		dev_dbg(ddev, "Setting CS7\n");
+		break;
+	default:
+	case CS8:
+		value |= 8;
+		dev_dbg(ddev, "Setting CS8\n");
+		break;
+	}
+
+	/* This is needed by the break command since it uses the same command
+	   - but is or'ed with this value  */
+	priv->last_set_data_value = value;
+
+	if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			    FTDI_SIO_SET_DATA_REQUEST,
+			    FTDI_SIO_SET_DATA_REQUEST_TYPE,
+			    value, priv->channel,
+			    NULL, 0, WDR_SHORT_TIMEOUT) < 0) {
+		dev_err(ddev, "%s FAILED to set databits/stopbits/parity\n",
+			__func__);
+	}
+
+	/* Now do the baudrate */
+no_data_parity_stop_changes:
+	if ((cflag & CBAUD) == B0) {
+		/* Disable flow control */
+		if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
+				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
+				    0, priv->channel,
+				    NULL, 0, WDR_TIMEOUT) < 0) {
+			dev_err(ddev, "%s error from disable flowcontrol urb\n",
+				__func__);
+		}
+		/* Drop RTS and DTR */
+		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+	} else {
+		/* set the baudrate determined before */
+		mutex_lock(&priv->cfg_lock);
+		if (change_speed(tty, port))
+			dev_err(ddev, "%s urb failed to set baudrate\n", __func__);
+		mutex_unlock(&priv->cfg_lock);
+		/* Ensure RTS and DTR are raised when baudrate changed from 0 */
+		if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+			set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+	}
+
+no_c_cflag_changes:
+	/* Set hardware-assisted flow control */
+	value = 0;
+
+	if (C_CRTSCTS(tty)) {
+		dev_dbg(&port->dev, "enabling rts/cts flow control\n");
+		index = FTDI_SIO_RTS_CTS_HS;
+	} else if (I_IXON(tty)) {
+		dev_dbg(&port->dev, "enabling xon/xoff flow control\n");
+		index = FTDI_SIO_XON_XOFF_HS;
+		value = STOP_CHAR(tty) << 8 | START_CHAR(tty);
+	} else {
+		dev_dbg(&port->dev, "disabling flow control\n");
+		index = FTDI_SIO_DISABLE_FLOW_CTRL;
+	}
+
+	index |= priv->channel;
+
+	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			FTDI_SIO_SET_FLOW_CTRL_REQUEST,
+			FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
+			value, index, NULL, 0, WDR_TIMEOUT);
+	if (ret < 0)
+		dev_err(&port->dev, "failed to set flow control: %d\n", ret);
+}
+
+/*
+ * Get modem-control status.
+ *
+ * Returns the number of status bytes retrieved (device dependant), or
+ * negative error code.
+ */
+static int ftdi_get_modem_status(struct usb_serial_port *port,
+						unsigned char status[2])
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	unsigned char *buf;
+	int len;
+	int ret;
+
+	buf = kmalloc(2, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	/*
+	 * The device returns a two byte value (the SIO a 1 byte value) in the
+	 * same format as the data returned from the IN endpoint.
+	 */
+	if (priv->chip_type == SIO)
+		len = 1;
+	else
+		len = 2;
+
+	ret = usb_control_msg(port->serial->dev,
+			usb_rcvctrlpipe(port->serial->dev, 0),
+			FTDI_SIO_GET_MODEM_STATUS_REQUEST,
+			FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
+			0, priv->channel,
+			buf, len, WDR_TIMEOUT);
+
+	/* NOTE: We allow short responses and handle that below. */
+	if (ret < 1) {
+		dev_err(&port->dev, "failed to get modem status: %d\n", ret);
+		if (ret >= 0)
+			ret = -EIO;
+		ret = usb_translate_errors(ret);
+		goto out;
+	}
+
+	status[0] = buf[0];
+	if (ret > 1)
+		status[1] = buf[1];
+	else
+		status[1] = 0;
+
+	dev_dbg(&port->dev, "%s - 0x%02x%02x\n", __func__, status[0],
+								status[1]);
+out:
+	kfree(buf);
+
+	return ret;
+}
+
+static int ftdi_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	unsigned char buf[2];
+	int ret;
+
+	ret = ftdi_get_modem_status(port, buf);
+	if (ret < 0)
+		return ret;
+
+	ret =	(buf[0] & FTDI_SIO_DSR_MASK  ? TIOCM_DSR : 0) |
+		(buf[0] & FTDI_SIO_CTS_MASK  ? TIOCM_CTS : 0) |
+		(buf[0] & FTDI_SIO_RI_MASK   ? TIOCM_RI  : 0) |
+		(buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD  : 0) |
+		priv->last_dtr_rts;
+
+	return ret;
+}
+
+static int ftdi_tiocmset(struct tty_struct *tty,
+			unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	return update_mctrl(port, set, clear);
+}
+
+static int ftdi_ioctl(struct tty_struct *tty,
+					unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	void __user *argp = (void __user *)arg;
+
+	switch (cmd) {
+	case TIOCSERGETLSR:
+		return get_lsr_info(port, argp);
+	default:
+		break;
+	}
+
+	return -ENOIOCTLCMD;
+}
+
+static struct usb_serial_driver ftdi_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"ftdi_sio",
+		.dev_groups =	ftdi_groups,
+	},
+	.description =		"FTDI USB Serial Device",
+	.id_table =		id_table_combined,
+	.num_ports =		1,
+	.bulk_in_size =		512,
+	.bulk_out_size =	256,
+	.probe =		ftdi_probe,
+	.port_probe =		ftdi_port_probe,
+	.port_remove =		ftdi_port_remove,
+	.open =			ftdi_open,
+	.dtr_rts =		ftdi_dtr_rts,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+	.process_read_urb =	ftdi_process_read_urb,
+	.prepare_write_buffer =	ftdi_prepare_write_buffer,
+	.tiocmget =		ftdi_tiocmget,
+	.tiocmset =		ftdi_tiocmset,
+	.tiocmiwait =		usb_serial_generic_tiocmiwait,
+	.get_icount =		usb_serial_generic_get_icount,
+	.ioctl =		ftdi_ioctl,
+	.get_serial =		get_serial_info,
+	.set_serial =		set_serial_info,
+	.set_termios =		ftdi_set_termios,
+	.break_ctl =		ftdi_break_ctl,
+	.tx_empty =		ftdi_tx_empty,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ftdi_device, NULL
+};
+module_usb_serial_driver(serial_drivers, id_table_combined);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(ndi_latency_timer, int, 0644);
+MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override");
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
new file mode 100644
index 000000000..55ea61264
--- /dev/null
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -0,0 +1,579 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Driver definitions for the FTDI USB Single Port Serial Converter -
+ * known as FTDI_SIO (Serial Input/Output application of the chipset)
+ *
+ * For USB vendor/product IDs (VID/PID), please see ftdi_sio_ids.h
+ *
+ *
+ * The example I have is known as the USC-1000 which is available from
+ * http://www.dse.co.nz - cat no XH4214 It looks similar to this:
+ * http://www.dansdata.com/usbser.htm but I can't be sure There are other
+ * USC-1000s which don't look like my device though so beware!
+ *
+ * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side,
+ * USB on the other.
+ *
+ * Thanx to FTDI (http://www.ftdichip.com) for so kindly providing details
+ * of the protocol required to talk to the device and ongoing assistence
+ * during development.
+ *
+ * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the
+ * FTDI_SIO implementation.
+ *
+ */
+
+/* Commands */
+#define FTDI_SIO_RESET			0 /* Reset the port */
+#define FTDI_SIO_MODEM_CTRL		1 /* Set the modem control register */
+#define FTDI_SIO_SET_FLOW_CTRL		2 /* Set flow control register */
+#define FTDI_SIO_SET_BAUD_RATE		3 /* Set baud rate */
+#define FTDI_SIO_SET_DATA		4 /* Set the data characteristics of
+					     the port */
+#define FTDI_SIO_GET_MODEM_STATUS	5 /* Retrieve current value of modem
+					     status register */
+#define FTDI_SIO_SET_EVENT_CHAR		6 /* Set the event character */
+#define FTDI_SIO_SET_ERROR_CHAR		7 /* Set the error character */
+#define FTDI_SIO_SET_LATENCY_TIMER	9 /* Set the latency timer */
+#define FTDI_SIO_GET_LATENCY_TIMER	0x0a /* Get the latency timer */
+#define FTDI_SIO_SET_BITMODE		0x0b /* Set bitbang mode */
+#define FTDI_SIO_READ_PINS		0x0c /* Read immediate value of pins */
+#define FTDI_SIO_READ_EEPROM		0x90 /* Read EEPROM */
+
+/* Channel indices for FT2232, FT2232H and FT4232H devices */
+#define CHANNEL_A		1
+#define CHANNEL_B		2
+#define CHANNEL_C		3
+#define CHANNEL_D		4
+
+
+/*
+ *   BmRequestType:  1100 0000b
+ *   bRequest:       FTDI_E2_READ
+ *   wValue:         0
+ *   wIndex:         Address of word to read
+ *   wLength:        2
+ *   Data:           Will return a word of data from E2Address
+ *
+ */
+
+/* Port Identifier Table */
+#define PIT_DEFAULT		0 /* SIOA */
+#define PIT_SIOA		1 /* SIOA */
+/* The device this driver is tested with one has only one port */
+#define PIT_SIOB		2 /* SIOB */
+#define PIT_PARALLEL		3 /* Parallel */
+
+/* FTDI_SIO_RESET */
+#define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET
+#define FTDI_SIO_RESET_REQUEST_TYPE 0x40
+#define FTDI_SIO_RESET_SIO 0
+#define FTDI_SIO_RESET_PURGE_RX 1
+#define FTDI_SIO_RESET_PURGE_TX 2
+
+/*
+ * BmRequestType:  0100 0000B
+ * bRequest:       FTDI_SIO_RESET
+ * wValue:         Control Value
+ *                   0 = Reset SIO
+ *                   1 = Purge RX buffer
+ *                   2 = Purge TX buffer
+ * wIndex:         Port
+ * wLength:        0
+ * Data:           None
+ *
+ * The Reset SIO command has this effect:
+ *
+ *    Sets flow control set to 'none'
+ *    Event char = $0D
+ *    Event trigger = disabled
+ *    Purge RX buffer
+ *    Purge TX buffer
+ *    Clear DTR
+ *    Clear RTS
+ *    baud and data format not reset
+ *
+ * The Purge RX and TX buffer commands affect nothing except the buffers
+ *
+   */
+
+/* FTDI_SIO_SET_BAUDRATE */
+#define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40
+#define FTDI_SIO_SET_BAUDRATE_REQUEST 3
+
+/*
+ * BmRequestType:  0100 0000B
+ * bRequest:       FTDI_SIO_SET_BAUDRATE
+ * wValue:         BaudDivisor value - see below
+ * wIndex:         Port
+ * wLength:        0
+ * Data:           None
+ * The BaudDivisor values are calculated as follows:
+ * - BaseClock is either 12000000 or 48000000 depending on the device.
+ *   FIXME: I wish I knew how to detect old chips to select proper base clock!
+ * - BaudDivisor is a fixed point number encoded in a funny way.
+ *   (--WRONG WAY OF THINKING--)
+ *   BaudDivisor is a fixed point number encoded with following bit weighs:
+ *   (-2)(-1)(13..0). It is a radical with a denominator of 4, so values
+ *   end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...).
+ *   (--THE REALITY--)
+ *   The both-bits-set has quite different meaning from 0.75 - the chip
+ *   designers have decided it to mean 0.125 instead of 0.75.
+ *   This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates
+ *   and Flow Control Consideration for USB to RS232".
+ * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should
+ *   automagically re-encode the resulting value to take fractions into
+ *   consideration.
+ * As all values are integers, some bit twiddling is in order:
+ *   BaudDivisor = (BaseClock / 16 / BaudRate) |
+ *   (((BaseClock / 2 / BaudRate) & 4) ? 0x4000    // 0.5
+ *    : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000  // 0.25
+ *    : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000  // 0.125
+ *    : 0)
+ *
+ * For the FT232BM, a 17th divisor bit was introduced to encode the multiples
+ * of 0.125 missing from the FT8U232AM.  Bits 16 to 14 are coded as follows
+ * (the first four codes are the same as for the FT8U232AM, where bit 16 is
+ * always 0):
+ *   000 - add .000 to divisor
+ *   001 - add .500 to divisor
+ *   010 - add .250 to divisor
+ *   011 - add .125 to divisor
+ *   100 - add .375 to divisor
+ *   101 - add .625 to divisor
+ *   110 - add .750 to divisor
+ *   111 - add .875 to divisor
+ * Bits 15 to 0 of the 17-bit divisor are placed in the urb value.  Bit 16 is
+ * placed in bit 0 of the urb index.
+ *
+ * Note that there are a couple of special cases to support the highest baud
+ * rates.  If the calculated divisor value is 1, this needs to be replaced with
+ * 0.  Additionally for the FT232BM, if the calculated divisor value is 0x4001
+ * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is
+ * not supported by the FT8U232AM).
+ */
+
+enum ftdi_sio_baudrate {
+	ftdi_sio_b300 = 0,
+	ftdi_sio_b600 = 1,
+	ftdi_sio_b1200 = 2,
+	ftdi_sio_b2400 = 3,
+	ftdi_sio_b4800 = 4,
+	ftdi_sio_b9600 = 5,
+	ftdi_sio_b19200 = 6,
+	ftdi_sio_b38400 = 7,
+	ftdi_sio_b57600 = 8,
+	ftdi_sio_b115200 = 9
+};
+
+/*
+ * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor
+ * values are calculated internally.
+ */
+#define FTDI_SIO_SET_DATA_REQUEST	FTDI_SIO_SET_DATA
+#define FTDI_SIO_SET_DATA_REQUEST_TYPE	0x40
+#define FTDI_SIO_SET_DATA_PARITY_NONE	(0x0 << 8)
+#define FTDI_SIO_SET_DATA_PARITY_ODD	(0x1 << 8)
+#define FTDI_SIO_SET_DATA_PARITY_EVEN	(0x2 << 8)
+#define FTDI_SIO_SET_DATA_PARITY_MARK	(0x3 << 8)
+#define FTDI_SIO_SET_DATA_PARITY_SPACE	(0x4 << 8)
+#define FTDI_SIO_SET_DATA_STOP_BITS_1	(0x0 << 11)
+#define FTDI_SIO_SET_DATA_STOP_BITS_15	(0x1 << 11)
+#define FTDI_SIO_SET_DATA_STOP_BITS_2	(0x2 << 11)
+#define FTDI_SIO_SET_BREAK		(0x1 << 14)
+/* FTDI_SIO_SET_DATA */
+
+/*
+ * BmRequestType:  0100 0000B
+ * bRequest:       FTDI_SIO_SET_DATA
+ * wValue:         Data characteristics (see below)
+ * wIndex:         Port
+ * wLength:        0
+ * Data:           No
+ *
+ * Data characteristics
+ *
+ *   B0..7   Number of data bits
+ *   B8..10  Parity
+ *           0 = None
+ *           1 = Odd
+ *           2 = Even
+ *           3 = Mark
+ *           4 = Space
+ *   B11..13 Stop Bits
+ *           0 = 1
+ *           1 = 1.5
+ *           2 = 2
+ *   B14
+ *           1 = TX ON (break)
+ *           0 = TX OFF (normal state)
+ *   B15 Reserved
+ *
+ */
+
+
+
+/* FTDI_SIO_MODEM_CTRL */
+#define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40
+#define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL
+
+/*
+ * BmRequestType:   0100 0000B
+ * bRequest:        FTDI_SIO_MODEM_CTRL
+ * wValue:          ControlValue (see below)
+ * wIndex:          Port
+ * wLength:         0
+ * Data:            None
+ *
+ * NOTE: If the device is in RTS/CTS flow control, the RTS set by this
+ * command will be IGNORED without an error being returned
+ * Also - you can not set DTR and RTS with one control message
+ */
+
+#define FTDI_SIO_SET_DTR_MASK 0x1
+#define FTDI_SIO_SET_DTR_HIGH ((FTDI_SIO_SET_DTR_MASK  << 8) | 1)
+#define FTDI_SIO_SET_DTR_LOW  ((FTDI_SIO_SET_DTR_MASK  << 8) | 0)
+#define FTDI_SIO_SET_RTS_MASK 0x2
+#define FTDI_SIO_SET_RTS_HIGH ((FTDI_SIO_SET_RTS_MASK << 8) | 2)
+#define FTDI_SIO_SET_RTS_LOW  ((FTDI_SIO_SET_RTS_MASK << 8) | 0)
+
+/*
+ * ControlValue
+ * B0    DTR state
+ *          0 = reset
+ *          1 = set
+ * B1    RTS state
+ *          0 = reset
+ *          1 = set
+ * B2..7 Reserved
+ * B8    DTR state enable
+ *          0 = ignore
+ *          1 = use DTR state
+ * B9    RTS state enable
+ *          0 = ignore
+ *          1 = use RTS state
+ * B10..15 Reserved
+ */
+
+/* FTDI_SIO_SET_FLOW_CTRL */
+#define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40
+#define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL
+#define FTDI_SIO_DISABLE_FLOW_CTRL 0x0
+#define FTDI_SIO_RTS_CTS_HS (0x1 << 8)
+#define FTDI_SIO_DTR_DSR_HS (0x2 << 8)
+#define FTDI_SIO_XON_XOFF_HS (0x4 << 8)
+/*
+ *   BmRequestType:  0100 0000b
+ *   bRequest:       FTDI_SIO_SET_FLOW_CTRL
+ *   wValue:         Xoff/Xon
+ *   wIndex:         Protocol/Port - hIndex is protocol / lIndex is port
+ *   wLength:        0
+ *   Data:           None
+ *
+ * hIndex protocol is:
+ *   B0 Output handshaking using RTS/CTS
+ *       0 = disabled
+ *       1 = enabled
+ *   B1 Output handshaking using DTR/DSR
+ *       0 = disabled
+ *       1 = enabled
+ *   B2 Xon/Xoff handshaking
+ *       0 = disabled
+ *       1 = enabled
+ *
+ * A value of zero in the hIndex field disables handshaking
+ *
+ * If Xon/Xoff handshaking is specified, the hValue field should contain the
+ * XOFF character and the lValue field contains the XON character.
+ */
+
+/*
+ * FTDI_SIO_GET_LATENCY_TIMER
+ *
+ * Set the timeout interval. The FTDI collects data from the
+ * device, transmitting it to the host when either A) 62 bytes are
+ * received, or B) the timeout interval has elapsed and the buffer
+ * contains at least 1 byte.  Setting this value to a small number
+ * can dramatically improve performance for applications which send
+ * small packets, since the default value is 16ms.
+ */
+#define  FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER
+#define  FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0
+
+/*
+ *  BmRequestType:   1100 0000b
+ *  bRequest:        FTDI_SIO_GET_LATENCY_TIMER
+ *  wValue:          0
+ *  wIndex:          Port
+ *  wLength:         0
+ *  Data:            latency (on return)
+ */
+
+/*
+ * FTDI_SIO_SET_LATENCY_TIMER
+ *
+ * Set the timeout interval. The FTDI collects data from the
+ * device, transmitting it to the host when either A) 62 bytes are
+ * received, or B) the timeout interval has elapsed and the buffer
+ * contains at least 1 byte.  Setting this value to a small number
+ * can dramatically improve performance for applications which send
+ * small packets, since the default value is 16ms.
+ */
+#define  FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER
+#define  FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40
+
+/*
+ *  BmRequestType:   0100 0000b
+ *  bRequest:        FTDI_SIO_SET_LATENCY_TIMER
+ *  wValue:          Latency (milliseconds)
+ *  wIndex:          Port
+ *  wLength:         0
+ *  Data:            None
+ *
+ * wValue:
+ *   B0..7   Latency timer
+ *   B8..15  0
+ *
+ */
+
+/*
+ * FTDI_SIO_SET_EVENT_CHAR
+ *
+ * Set the special event character for the specified communications port.
+ * If the device sees this character it will immediately return the
+ * data read so far - rather than wait 40ms or until 62 bytes are read
+ * which is what normally happens.
+ */
+
+
+#define  FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR
+#define  FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40
+
+
+/*
+ *  BmRequestType:   0100 0000b
+ *  bRequest:        FTDI_SIO_SET_EVENT_CHAR
+ *  wValue:          EventChar
+ *  wIndex:          Port
+ *  wLength:         0
+ *  Data:            None
+ *
+ * wValue:
+ *   B0..7   Event Character
+ *   B8      Event Character Processing
+ *             0 = disabled
+ *             1 = enabled
+ *   B9..15  Reserved
+ *
+ */
+
+/* FTDI_SIO_SET_ERROR_CHAR */
+
+/*
+ * Set the parity error replacement character for the specified communications
+ * port
+ */
+
+/*
+ *  BmRequestType:  0100 0000b
+ *  bRequest:       FTDI_SIO_SET_EVENT_CHAR
+ *  wValue:         Error Char
+ *  wIndex:         Port
+ *  wLength:        0
+ *  Data:           None
+ *
+ *Error Char
+ *  B0..7  Error Character
+ *  B8     Error Character Processing
+ *           0 = disabled
+ *           1 = enabled
+ *  B9..15 Reserved
+ *
+ */
+
+/* FTDI_SIO_GET_MODEM_STATUS */
+/* Retrieve the current value of the modem status register */
+
+#define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0
+#define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS
+#define FTDI_SIO_CTS_MASK 0x10
+#define FTDI_SIO_DSR_MASK 0x20
+#define FTDI_SIO_RI_MASK  0x40
+#define FTDI_SIO_RLSD_MASK 0x80
+/*
+ *   BmRequestType:   1100 0000b
+ *   bRequest:        FTDI_SIO_GET_MODEM_STATUS
+ *   wValue:          zero
+ *   wIndex:          Port
+ *   wLength:         1
+ *   Data:            Status
+ *
+ * One byte of data is returned
+ * B0..3 0
+ * B4    CTS
+ *         0 = inactive
+ *         1 = active
+ * B5    DSR
+ *         0 = inactive
+ *         1 = active
+ * B6    Ring Indicator (RI)
+ *         0 = inactive
+ *         1 = active
+ * B7    Receive Line Signal Detect (RLSD)
+ *         0 = inactive
+ *         1 = active
+ */
+
+/* FTDI_SIO_SET_BITMODE */
+#define FTDI_SIO_SET_BITMODE_REQUEST_TYPE 0x40
+#define FTDI_SIO_SET_BITMODE_REQUEST FTDI_SIO_SET_BITMODE
+
+/* Possible bitmodes for FTDI_SIO_SET_BITMODE_REQUEST */
+#define FTDI_SIO_BITMODE_RESET		0x00
+#define FTDI_SIO_BITMODE_CBUS		0x20
+
+/* FTDI_SIO_READ_PINS */
+#define FTDI_SIO_READ_PINS_REQUEST_TYPE 0xc0
+#define FTDI_SIO_READ_PINS_REQUEST FTDI_SIO_READ_PINS
+
+/*
+ * FTDI_SIO_READ_EEPROM
+ *
+ * EEPROM format found in FTDI AN_201, "FT-X MTP memory Configuration",
+ * http://www.ftdichip.com/Support/Documents/AppNotes/AN_201_FT-X%20MTP%20Memory%20Configuration.pdf
+ */
+#define FTDI_SIO_READ_EEPROM_REQUEST_TYPE 0xc0
+#define FTDI_SIO_READ_EEPROM_REQUEST FTDI_SIO_READ_EEPROM
+
+#define FTDI_FTX_CBUS_MUX_GPIO		0x8
+#define FTDI_FT232R_CBUS_MUX_GPIO	0xa
+
+
+/* Descriptors returned by the device
+ *
+ *  Device Descriptor
+ *
+ * Offset	Field		Size	Value	Description
+ * 0	bLength		1	0x12	Size of descriptor in bytes
+ * 1	bDescriptorType	1	0x01	DEVICE Descriptor Type
+ * 2	bcdUSB		2	0x0110	USB Spec Release Number
+ * 4	bDeviceClass	1	0x00	Class Code
+ * 5	bDeviceSubClass	1	0x00	SubClass Code
+ * 6	bDeviceProtocol	1	0x00	Protocol Code
+ * 7	bMaxPacketSize0 1	0x08	Maximum packet size for endpoint 0
+ * 8	idVendor	2	0x0403	Vendor ID
+ * 10	idProduct	2	0x8372	Product ID (FTDI_SIO_PID)
+ * 12	bcdDevice	2	0x0001	Device release number
+ * 14	iManufacturer	1	0x01	Index of man. string desc
+ * 15	iProduct	1	0x02	Index of prod string desc
+ * 16	iSerialNumber	1	0x02	Index of serial nmr string desc
+ * 17	bNumConfigurations 1    0x01	Number of possible configurations
+ *
+ * Configuration Descriptor
+ *
+ * Offset	Field			Size	Value
+ * 0	bLength			1	0x09	Size of descriptor in bytes
+ * 1	bDescriptorType		1	0x02	CONFIGURATION Descriptor Type
+ * 2	wTotalLength		2	0x0020	Total length of data
+ * 4	bNumInterfaces		1	0x01	Number of interfaces supported
+ * 5	bConfigurationValue	1	0x01	Argument for SetCOnfiguration() req
+ * 6	iConfiguration		1	0x02	Index of config string descriptor
+ * 7	bmAttributes		1	0x20	Config characteristics Remote Wakeup
+ * 8	MaxPower		1	0x1E	Max power consumption
+ *
+ * Interface Descriptor
+ *
+ * Offset	Field			Size	Value
+ * 0	bLength			1	0x09	Size of descriptor in bytes
+ * 1	bDescriptorType		1	0x04	INTERFACE Descriptor Type
+ * 2	bInterfaceNumber	1	0x00	Number of interface
+ * 3	bAlternateSetting	1	0x00	Value used to select alternate
+ * 4	bNumEndpoints		1	0x02	Number of endpoints
+ * 5	bInterfaceClass		1	0xFF	Class Code
+ * 6	bInterfaceSubClass	1	0xFF	Subclass Code
+ * 7	bInterfaceProtocol	1	0xFF	Protocol Code
+ * 8	iInterface		1	0x02	Index of interface string description
+ *
+ * IN Endpoint Descriptor
+ *
+ * Offset	Field			Size	Value
+ * 0	bLength			1	0x07	Size of descriptor in bytes
+ * 1	bDescriptorType		1	0x05	ENDPOINT descriptor type
+ * 2	bEndpointAddress	1	0x82	Address of endpoint
+ * 3	bmAttributes		1	0x02	Endpoint attributes - Bulk
+ * 4	bNumEndpoints		2	0x0040	maximum packet size
+ * 5	bInterval		1	0x00	Interval for polling endpoint
+ *
+ * OUT Endpoint Descriptor
+ *
+ * Offset	Field			Size	Value
+ * 0	bLength			1	0x07	Size of descriptor in bytes
+ * 1	bDescriptorType		1	0x05	ENDPOINT descriptor type
+ * 2	bEndpointAddress	1	0x02	Address of endpoint
+ * 3	bmAttributes		1	0x02	Endpoint attributes - Bulk
+ * 4	bNumEndpoints		2	0x0040	maximum packet size
+ * 5	bInterval		1	0x00	Interval for polling endpoint
+ *
+ * DATA FORMAT
+ *
+ * IN Endpoint
+ *
+ * The device reserves the first two bytes of data on this endpoint to contain
+ * the current values of the modem and line status registers. In the absence of
+ * data, the device generates a message consisting of these two status bytes
+ * every 40 ms
+ *
+ * Byte 0: Modem Status
+ *
+ * Offset	Description
+ * B0	Reserved - must be 1
+ * B1	Reserved - must be 0
+ * B2	Reserved - must be 0
+ * B3	Reserved - must be 0
+ * B4	Clear to Send (CTS)
+ * B5	Data Set Ready (DSR)
+ * B6	Ring Indicator (RI)
+ * B7	Receive Line Signal Detect (RLSD)
+ *
+ * Byte 1: Line Status
+ *
+ * Offset	Description
+ * B0	Data Ready (DR)
+ * B1	Overrun Error (OE)
+ * B2	Parity Error (PE)
+ * B3	Framing Error (FE)
+ * B4	Break Interrupt (BI)
+ * B5	Transmitter Holding Register (THRE)
+ * B6	Transmitter Empty (TEMT)
+ * B7	Error in RCVR FIFO
+ *
+ */
+#define FTDI_RS0_CTS	(1 << 4)
+#define FTDI_RS0_DSR	(1 << 5)
+#define FTDI_RS0_RI	(1 << 6)
+#define FTDI_RS0_RLSD	(1 << 7)
+
+#define FTDI_RS_DR	1
+#define FTDI_RS_OE	(1<<1)
+#define FTDI_RS_PE	(1<<2)
+#define FTDI_RS_FE	(1<<3)
+#define FTDI_RS_BI	(1<<4)
+#define FTDI_RS_THRE	(1<<5)
+#define FTDI_RS_TEMT	(1<<6)
+#define FTDI_RS_FIFO	(1<<7)
+
+/*
+ * OUT Endpoint
+ *
+ * This device reserves the first bytes of data on this endpoint contain the
+ * length and port identifier of the message. For the FTDI USB Serial converter
+ * the port identifier is always 1.
+ *
+ * Byte 0: Line Status
+ *
+ * Offset	Description
+ * B0	Reserved - must be 1
+ * B1	Reserved - must be 0
+ * B2..7	Length of message - (not including Byte 0)
+ *
+ */
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
new file mode 100644
index 000000000..21a2b5a25
--- /dev/null
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -0,0 +1,1608 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters.
+ * Please keep numerically sorted within individual areas, thanks!
+ *
+ * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
+ * from Rudolf Gugler
+ *
+ */
+
+
+/**********************************/
+/***** devices using FTDI VID *****/
+/**********************************/
+
+
+#define FTDI_VID	0x0403	/* Vendor Id */
+
+
+/*** "original" FTDI device PIDs ***/
+
+#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
+#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
+#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
+#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
+#define FTDI_232H_PID  0x6014 /* Single channel hi-speed device */
+#define FTDI_FTX_PID   0x6015 /* FT-X series (FT201X, FT230X, FT231X, etc) */
+#define FTDI_FT2233HP_PID	0x6040 /* Dual channel hi-speed device with PD */
+#define FTDI_FT4233HP_PID	0x6041 /* Quad channel hi-speed device with PD */
+#define FTDI_FT2232HP_PID	0x6042 /* Dual channel hi-speed device with PD */
+#define FTDI_FT4232HP_PID	0x6043 /* Quad channel hi-speed device with PD */
+#define FTDI_FT233HP_PID	0x6044 /* Dual channel hi-speed device with PD */
+#define FTDI_FT232HP_PID	0x6045 /* Dual channel hi-speed device with PD */
+#define FTDI_FT4232HA_PID	0x6048 /* Quad channel automotive grade hi-speed device */
+#define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX */
+#define FTDI_232RL_PID  0xFBFA  /* Product ID for FT232RL */
+
+
+/*** third-party PIDs (using FTDI_VID) ***/
+
+/*
+ * Certain versions of the official Windows FTDI driver reprogrammed
+ * counterfeit FTDI devices to PID 0. Support these devices anyway.
+ */
+#define FTDI_BRICK_PID		0x0000
+
+#define FTDI_LUMEL_PD12_PID	0x6002
+
+/*
+ * Custom USB adapters made by Falconia Partners LLC
+ * for FreeCalypso project, ID codes allocated to Falconia by FTDI.
+ */
+#define FTDI_FALCONIA_JTAG_BUF_PID	0x7150
+#define FTDI_FALCONIA_JTAG_UNBUF_PID	0x7151
+
+/* Sienna Serial Interface by Secyourit GmbH */
+#define FTDI_SIENNA_PID		0x8348
+
+/* Cyber Cortex AV by Fabulous Silicon (http://fabuloussilicon.com) */
+#define CYBER_CORTEX_AV_PID	0x8698
+
+/*
+ * Marvell OpenRD Base, Client
+ * http://www.open-rd.org
+ * OpenRD Base, Client use VID 0x0403
+ */
+#define MARVELL_OPENRD_PID	0x9e90
+
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
+#define FTDI_BM_ATOM_NANO_PID	0xa559	/* Basic Micro ATOM Nano USB2Serial */
+
+/*
+ * Texas Instruments XDS100v2 JTAG / BeagleBone A3
+ * http://processors.wiki.ti.com/index.php/XDS100
+ * http://beagleboard.org/bone
+ */
+#define TI_XDS100V2_PID		0xa6d0
+
+#define FTDI_NXTCAM_PID		0xABB8 /* NXTCam for Mindstorms NXT */
+#define FTDI_EV3CON_PID		0xABB9 /* Mindstorms EV3 Console Adapter */
+
+/* US Interface Navigator (http://www.usinterface.com/) */
+#define FTDI_USINT_CAT_PID	0xb810	/* Navigator CAT and 2nd PTT lines */
+#define FTDI_USINT_WKEY_PID	0xb811	/* Navigator WKEY and FSK lines */
+#define FTDI_USINT_RS232_PID	0xb812	/* Navigator RS232 and CONFIG lines */
+
+/* OOCDlink by Joern Kaipf <joernk@web.de>
+ * (http://www.joernonline.de/) */
+#define FTDI_OOCDLINK_PID	0xbaf8	/* Amontec JTAGkey */
+
+/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
+/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
+#define LMI_LM3S_DEVEL_BOARD_PID	0xbcd8
+#define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
+#define LMI_LM3S_ICDI_BOARD_PID		0xbcda
+
+#define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */
+
+/* OpenDCC (www.opendcc.de) product id */
+#define FTDI_OPENDCC_PID	0xBFD8
+#define FTDI_OPENDCC_SNIFFER_PID	0xBFD9
+#define FTDI_OPENDCC_THROTTLE_PID	0xBFDA
+#define FTDI_OPENDCC_GATEWAY_PID	0xBFDB
+#define FTDI_OPENDCC_GBM_PID	0xBFDC
+#define FTDI_OPENDCC_GBM_BOOST_PID	0xBFDD
+
+/* NZR SEM 16+ USB (http://www.nzr.de) */
+#define FTDI_NZR_SEM_USB_PID	0xC1E0	/* NZR SEM-LOG16+ */
+
+/*
+ * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
+ */
+#define FTDI_RRCIRKITS_LOCOBUFFER_PID	0xc7d0	/* LocoBuffer USB */
+
+/* DMX4ALL DMX Interfaces */
+#define FTDI_DMX4ALL 0xC850
+
+/*
+ * ASK.fr devices
+ */
+#define FTDI_ASK_RDR400_PID	0xC991	/* ASK RDR 400 series card reader */
+
+/* www.starting-point-systems.com µChameleon device */
+#define FTDI_MICRO_CHAMELEON_PID	0xCAA0	/* Product Id */
+
+/*
+ * Tactrix OpenPort (ECU) devices.
+ * OpenPort 1.3M submitted by Donour Sizemore.
+ * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
+ */
+#define FTDI_TACTRIX_OPENPORT_13M_PID	0xCC48	/* OpenPort 1.3 Mitsubishi */
+#define FTDI_TACTRIX_OPENPORT_13S_PID	0xCC49	/* OpenPort 1.3 Subaru */
+#define FTDI_TACTRIX_OPENPORT_13U_PID	0xCC4A	/* OpenPort 1.3 Universal */
+
+#define FTDI_DISTORTEC_JTAG_LOCK_PICK_PID	0xCFF8
+
+/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
+/* the VID is the standard ftdi vid (FTDI_VID) */
+#define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
+#define FTDI_SCS_DEVICE_1_PID 0xD011    /* SCS Tracker / DSP TNC */
+#define FTDI_SCS_DEVICE_2_PID 0xD012
+#define FTDI_SCS_DEVICE_3_PID 0xD013
+#define FTDI_SCS_DEVICE_4_PID 0xD014
+#define FTDI_SCS_DEVICE_5_PID 0xD015
+#define FTDI_SCS_DEVICE_6_PID 0xD016
+#define FTDI_SCS_DEVICE_7_PID 0xD017
+
+/* iPlus device */
+#define FTDI_IPLUS_PID 0xD070 /* Product Id */
+#define FTDI_IPLUS2_PID 0xD071 /* Product Id */
+
+/*
+ * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
+ */
+#define FTDI_GAMMA_SCOUT_PID		0xD678	/* Gamma Scout online */
+
+/* Propox devices */
+#define FTDI_PROPOX_JTAGCABLEII_PID	0xD738
+#define FTDI_PROPOX_ISPCABLEIII_PID	0xD739
+
+/* Lenz LI-USB Computer Interface. */
+#define FTDI_LENZ_LIUSB_PID	0xD780
+
+/* Vardaan Enterprises Serial Interface VEUSB422R3 */
+#define FTDI_VARDAAN_PID	0xF070
+
+/* Auto-M3 Ltd. - OP-COM USB V2 - OBD interface Adapter */
+#define FTDI_AUTO_M3_OP_COM_V2_PID	0x4f50
+
+/*
+ * Xsens Technologies BV products (http://www.xsens.com).
+ */
+#define XSENS_VID		0x2639
+#define XSENS_AWINDA_STATION_PID 0x0101
+#define XSENS_AWINDA_DONGLE_PID 0x0102
+#define XSENS_MTW_PID		0x0200	/* Xsens MTw */
+#define XSENS_MTDEVBOARD_PID	0x0300	/* Motion Tracker Development Board */
+#define XSENS_MTIUSBCONVERTER_PID	0x0301	/* MTi USB converter */
+#define XSENS_CONVERTER_PID	0xD00D	/* Xsens USB-serial converter */
+
+/* Xsens devices using FTDI VID */
+#define XSENS_CONVERTER_0_PID	0xD388	/* Xsens USB converter */
+#define XSENS_CONVERTER_1_PID	0xD389	/* Xsens Wireless Receiver */
+#define XSENS_CONVERTER_2_PID	0xD38A
+#define XSENS_CONVERTER_3_PID	0xD38B	/* Xsens USB-serial converter */
+#define XSENS_CONVERTER_4_PID	0xD38C	/* Xsens Wireless Receiver */
+#define XSENS_CONVERTER_5_PID	0xD38D	/* Xsens Awinda Station */
+#define XSENS_CONVERTER_6_PID	0xD38E
+#define XSENS_CONVERTER_7_PID	0xD38F
+
+/**
+ * Zolix (www.zolix.com.cb) product ids
+ */
+#define FTDI_OMNI1509			0xD491	/* Omni1509 embedded USB-serial */
+
+/*
+ * NDI (www.ndigital.com) product ids
+ */
+#define FTDI_NDI_HUC_PID		0xDA70	/* NDI Host USB Converter */
+#define FTDI_NDI_SPECTRA_SCU_PID	0xDA71	/* NDI Spectra SCU */
+#define FTDI_NDI_FUTURE_2_PID		0xDA72	/* NDI future device #2 */
+#define FTDI_NDI_FUTURE_3_PID		0xDA73	/* NDI future device #3 */
+#define FTDI_NDI_AURORA_SCU_PID		0xDA74	/* NDI Aurora SCU */
+
+/*
+ * ChamSys Limited (www.chamsys.co.uk) USB wing/interface product IDs
+ */
+#define FTDI_CHAMSYS_24_MASTER_WING_PID        0xDAF8
+#define FTDI_CHAMSYS_PC_WING_PID       0xDAF9
+#define FTDI_CHAMSYS_USB_DMX_PID       0xDAFA
+#define FTDI_CHAMSYS_MIDI_TIMECODE_PID 0xDAFB
+#define FTDI_CHAMSYS_MINI_WING_PID     0xDAFC
+#define FTDI_CHAMSYS_MAXI_WING_PID     0xDAFD
+#define FTDI_CHAMSYS_MEDIA_WING_PID    0xDAFE
+#define FTDI_CHAMSYS_WING_PID  0xDAFF
+
+/*
+ * Westrex International devices submitted by Cory Lee
+ */
+#define FTDI_WESTREX_MODEL_777_PID	0xDC00	/* Model 777 */
+#define FTDI_WESTREX_MODEL_8900F_PID	0xDC01	/* Model 8900F */
+
+/*
+ * ACG Identification Technologies GmbH products (http://www.acg.de/).
+ * Submitted by anton -at- goto10 -dot- org.
+ */
+#define FTDI_ACG_HFDUAL_PID		0xDD20	/* HF Dual ISO Reader (RFID) */
+
+/*
+ * Definitions for Artemis astronomical USB based cameras
+ * Check it at http://www.artemisccd.co.uk/
+ */
+#define FTDI_ARTEMIS_PID	0xDF28	/* All Artemis Cameras */
+
+/*
+ * Definitions for ATIK Instruments astronomical USB based cameras
+ * Check it at http://www.atik-instruments.com/
+ */
+#define FTDI_ATIK_ATK16_PID	0xDF30	/* ATIK ATK-16 Grayscale Camera */
+#define FTDI_ATIK_ATK16C_PID	0xDF32	/* ATIK ATK-16C Colour Camera */
+#define FTDI_ATIK_ATK16HR_PID	0xDF31	/* ATIK ATK-16HR Grayscale Camera */
+#define FTDI_ATIK_ATK16HRC_PID	0xDF33	/* ATIK ATK-16HRC Colour Camera */
+#define FTDI_ATIK_ATK16IC_PID   0xDF35  /* ATIK ATK-16IC Grayscale Camera */
+
+/*
+ * Yost Engineering, Inc. products (www.yostengineering.com).
+ * PID 0xE050 submitted by Aaron Prose.
+ */
+#define FTDI_YEI_SERVOCENTER31_PID	0xE050	/* YEI ServoCenter3.1 USB */
+
+/*
+ * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
+ * Almost all of these devices use FTDI's vendor ID (0x0403).
+ * Further IDs taken from ELV Windows .inf file.
+ *
+ * The previously included PID for the UO 100 module was incorrect.
+ * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
+ *
+ * Armin Laeuger originally sent the PID for the UM 100 module.
+ */
+#define FTDI_ELV_VID	0x1B1F	/* ELV AG */
+#define FTDI_ELV_WS300_PID	0xC006	/* eQ3 WS 300 PC II */
+#define FTDI_ELV_USR_PID	0xE000	/* ELV Universal-Sound-Recorder */
+#define FTDI_ELV_MSM1_PID	0xE001	/* ELV Mini-Sound-Modul */
+#define FTDI_ELV_KL100_PID	0xE002	/* ELV Kfz-Leistungsmesser KL 100 */
+#define FTDI_ELV_WS550_PID	0xE004	/* WS 550 */
+#define FTDI_ELV_EC3000_PID	0xE006	/* ENERGY CONTROL 3000 USB */
+#define FTDI_ELV_WS888_PID	0xE008	/* WS 888 */
+#define FTDI_ELV_TWS550_PID	0xE009	/* Technoline WS 550 */
+#define FTDI_ELV_FEM_PID	0xE00A	/* Funk Energie Monitor */
+#define FTDI_ELV_FHZ1300PC_PID	0xE0E8	/* FHZ 1300 PC */
+#define FTDI_ELV_WS500_PID	0xE0E9	/* PC-Wetterstation (WS 500) */
+#define FTDI_ELV_HS485_PID	0xE0EA	/* USB to RS-485 adapter */
+#define FTDI_ELV_UMS100_PID	0xE0EB	/* ELV USB Master-Slave Schaltsteckdose UMS 100 */
+#define FTDI_ELV_TFD128_PID	0xE0EC	/* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
+#define FTDI_ELV_FM3RX_PID	0xE0ED	/* ELV Messwertuebertragung FM3 RX */
+#define FTDI_ELV_WS777_PID	0xE0EE	/* Conrad WS 777 */
+#define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Energy monitor EM 1010 PC */
+#define FTDI_ELV_CSI8_PID	0xE0F0	/* Computer-Schalt-Interface (CSI 8) */
+#define FTDI_ELV_EM1000DL_PID	0xE0F1	/* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
+#define FTDI_ELV_PCK100_PID	0xE0F2	/* PC-Kabeltester (PCK 100) */
+#define FTDI_ELV_RFP500_PID	0xE0F3	/* HF-Leistungsmesser (RFP 500) */
+#define FTDI_ELV_FS20SIG_PID	0xE0F4	/* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_UTP8_PID	0xE0F5	/* ELV UTP 8 */
+#define FTDI_ELV_WS300PC_PID	0xE0F6	/* PC-Wetterstation (WS 300 PC) */
+#define FTDI_ELV_WS444PC_PID	0xE0F7	/* Conrad WS 444 PC */
+#define FTDI_PHI_FISCO_PID      0xE40B  /* PHI Fisco USB to Serial cable */
+#define FTDI_ELV_UAD8_PID	0xF068	/* USB-AD-Wandler (UAD 8) */
+#define FTDI_ELV_UDA7_PID	0xF069	/* USB-DA-Wandler (UDA 7) */
+#define FTDI_ELV_USI2_PID	0xF06A	/* USB-Schrittmotoren-Interface (USI 2) */
+#define FTDI_ELV_T1100_PID	0xF06B	/* Thermometer (T 1100) */
+#define FTDI_ELV_PCD200_PID	0xF06C	/* PC-Datenlogger (PCD 200) */
+#define FTDI_ELV_ULA200_PID	0xF06D	/* USB-LCD-Ansteuerung (ULA 200) */
+#define FTDI_ELV_ALC8500_PID	0xF06E	/* ALC 8500 Expert */
+#define FTDI_ELV_FHZ1000PC_PID	0xF06F	/* FHZ 1000 PC */
+#define FTDI_ELV_UR100_PID	0xFB58	/* USB-RS232-Umsetzer (UR 100) */
+#define FTDI_ELV_UM100_PID	0xFB5A	/* USB-Modul UM 100 */
+#define FTDI_ELV_UO100_PID	0xFB5B	/* USB-Modul UO 100 */
+/* Additional ELV PIDs that default to using the FTDI D2XX drivers on
+ * MS Windows, rather than the FTDI Virtual Com Port drivers.
+ * Maybe these will be easier to use with the libftdi/libusb user-space
+ * drivers, or possibly the Comedi drivers in some cases. */
+#define FTDI_ELV_CLI7000_PID	0xFB59	/* Computer-Light-Interface (CLI 7000) */
+#define FTDI_ELV_PPS7330_PID	0xFB5C	/* Processor-Power-Supply (PPS 7330) */
+#define FTDI_ELV_TFM100_PID	0xFB5D	/* Temperatur-Feuchte-Messgeraet (TFM 100) */
+#define FTDI_ELV_UDF77_PID	0xFB5E	/* USB DCF Funkuhr (UDF 77) */
+#define FTDI_ELV_UIO88_PID	0xFB5F	/* USB-I/O Interface (UIO 88) */
+
+/*
+ * EVER Eco Pro UPS (http://www.ever.com.pl/)
+ */
+
+#define	EVER_ECO_PRO_CDS	0xe520	/* RS-232 converter */
+
+/*
+ * Active Robots product ids.
+ */
+#define FTDI_ACTIVE_ROBOTS_PID	0xE548	/* USB comms board */
+
+/* Pyramid Computer GmbH */
+#define FTDI_PYRAMID_PID	0xE6C8	/* Pyramid Appliance Display */
+
+/* www.elsterelectricity.com Elster Unicom III Optical Probe */
+#define FTDI_ELSTER_UNICOM_PID		0xE700 /* Product Id */
+
+/*
+ * Gude Analog- und Digitalsysteme GmbH
+ */
+#define FTDI_GUDEADS_E808_PID    0xE808
+#define FTDI_GUDEADS_E809_PID    0xE809
+#define FTDI_GUDEADS_E80A_PID    0xE80A
+#define FTDI_GUDEADS_E80B_PID    0xE80B
+#define FTDI_GUDEADS_E80C_PID    0xE80C
+#define FTDI_GUDEADS_E80D_PID    0xE80D
+#define FTDI_GUDEADS_E80E_PID    0xE80E
+#define FTDI_GUDEADS_E80F_PID    0xE80F
+#define FTDI_GUDEADS_E888_PID    0xE888  /* Expert ISDN Control USB */
+#define FTDI_GUDEADS_E889_PID    0xE889  /* USB RS-232 OptoBridge */
+#define FTDI_GUDEADS_E88A_PID    0xE88A
+#define FTDI_GUDEADS_E88B_PID    0xE88B
+#define FTDI_GUDEADS_E88C_PID    0xE88C
+#define FTDI_GUDEADS_E88D_PID    0xE88D
+#define FTDI_GUDEADS_E88E_PID    0xE88E
+#define FTDI_GUDEADS_E88F_PID    0xE88F
+
+/*
+ * Eclo (http://www.eclo.pt/) product IDs.
+ * PID 0xEA90 submitted by Martin Grill.
+ */
+#define FTDI_ECLO_COM_1WIRE_PID	0xEA90	/* COM to 1-Wire USB adaptor */
+
+/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
+#define FTDI_TNC_X_PID		0xEBE0
+
+/*
+ * Teratronik product ids.
+ * Submitted by O. Wölfelschneider.
+ */
+#define FTDI_TERATRONIK_VCP_PID	 0xEC88	/* Teratronik device (preferring VCP driver on windows) */
+#define FTDI_TERATRONIK_D2XX_PID 0xEC89	/* Teratronik device (preferring D2XX driver on windows) */
+
+/* Rig Expert Ukraine devices */
+#define FTDI_REU_TINY_PID		0xED22	/* RigExpert Tiny */
+
+/*
+ * Hameg HO820 and HO870 interface (using VID 0x0403)
+ */
+#define HAMEG_HO820_PID			0xed74
+#define HAMEG_HO730_PID			0xed73
+#define HAMEG_HO720_PID			0xed72
+#define HAMEG_HO870_PID			0xed71
+
+/*
+ *  MaxStream devices	www.maxstream.net
+ */
+#define FTDI_MAXSTREAM_PID	0xEE18	/* Xbee PKG-U Module */
+
+/*
+ * microHAM product IDs (http://www.microham.com).
+ * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
+ * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
+ * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
+ */
+#define FTDI_MHAM_KW_PID	0xEEE8	/* USB-KW interface */
+#define FTDI_MHAM_YS_PID	0xEEE9	/* USB-YS interface */
+#define FTDI_MHAM_Y6_PID	0xEEEA	/* USB-Y6 interface */
+#define FTDI_MHAM_Y8_PID	0xEEEB	/* USB-Y8 interface */
+#define FTDI_MHAM_IC_PID	0xEEEC	/* USB-IC interface */
+#define FTDI_MHAM_DB9_PID	0xEEED	/* USB-DB9 interface */
+#define FTDI_MHAM_RS232_PID	0xEEEE	/* USB-RS232 interface */
+#define FTDI_MHAM_Y9_PID	0xEEEF	/* USB-Y9 interface */
+
+/* Domintell products  http://www.domintell.com */
+#define FTDI_DOMINTELL_DGQG_PID	0xEF50	/* Master */
+#define FTDI_DOMINTELL_DUSB_PID	0xEF51	/* DUSB01 module */
+
+/*
+ * The following are the values for the Perle Systems
+ * UltraPort USB serial converters
+ */
+#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0	/* Perle UltraPort Product Id */
+
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II		0xF0C8
+
+/*
+ * Two of the Tagsys RFID Readers
+ */
+#define FTDI_TAGSYS_LP101_PID	0xF0E9	/* Tagsys L-P101 RFID*/
+#define FTDI_TAGSYS_P200X_PID	0xF0EE	/* Tagsys Medio P200x RFID*/
+
+/* an infrared receiver for user access control with IR tags */
+#define FTDI_PIEGROUP_PID	0xF208	/* Product Id */
+
+/* ACT Solutions HomePro ZWave interface
+   (http://www.act-solutions.com/HomePro-Product-Matrix.html) */
+#define FTDI_ACTZWAVE_PID	0xF2D0
+
+/*
+ * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
+ * USB-TTY aktiv, USB-TTY passiv.  Some PIDs are used by several devices
+ * and I'm not entirely sure which are used by which.
+ */
+#define FTDI_4N_GALAXY_DE_1_PID	0xF3C0
+#define FTDI_4N_GALAXY_DE_2_PID	0xF3C1
+#define FTDI_4N_GALAXY_DE_3_PID	0xF3C2
+
+/*
+ * Ivium Technologies product IDs
+ */
+#define FTDI_PALMSENS_PID	0xf440
+#define FTDI_IVIUM_XSTAT_PID	0xf441
+
+/*
+ * Linx Technologies product ids
+ */
+#define LINX_SDMUSBQSS_PID	0xF448	/* Linx SDM-USB-QS-S */
+#define LINX_MASTERDEVEL2_PID   0xF449	/* Linx Master Development 2.0 */
+#define LINX_FUTURE_0_PID   0xF44A	/* Linx future device */
+#define LINX_FUTURE_1_PID   0xF44B	/* Linx future device */
+#define LINX_FUTURE_2_PID   0xF44C	/* Linx future device */
+
+/*
+ * Oceanic product ids
+ */
+#define FTDI_OCEANIC_PID	0xF460  /* Oceanic dive instrument */
+
+/*
+ * SUUNTO product ids
+ */
+#define FTDI_SUUNTO_SPORTS_PID	0xF680	/* Suunto Sports instrument */
+
+/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
+/* http://www.usbuirt.com/ */
+#define FTDI_USB_UIRT_PID	0xF850	/* Product Id */
+
+/* CCS Inc. ICDU/ICDU40 product ID -
+ * the FT232BM is used in an in-circuit-debugger unit for PIC16's/PIC18's */
+#define FTDI_CCSICDU20_0_PID    0xF9D0
+#define FTDI_CCSICDU40_1_PID    0xF9D1
+#define FTDI_CCSMACHX_2_PID     0xF9D2
+#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
+#define FTDI_CCSICDU64_4_PID    0xF9D4
+#define FTDI_CCSPRIME8_5_PID    0xF9D5
+
+/*
+ * The following are the values for the Matrix Orbital LCD displays,
+ * which are the FT232BM ( similar to the 8U232AM )
+ */
+#define FTDI_MTXORB_0_PID      0xFA00  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_1_PID      0xFA01  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_2_PID      0xFA02  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_3_PID      0xFA03  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_4_PID      0xFA04  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_5_PID      0xFA05  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_6_PID      0xFA06  /* Matrix Orbital Product Id */
+
+/*
+ * Home Electronics (www.home-electro.com) USB gadgets
+ */
+#define FTDI_HE_TIRA1_PID	0xFA78	/* Tira-1 IR transceiver */
+
+/* Inside Accesso contactless reader (http://www.insidecontactless.com/) */
+#define INSIDE_ACCESSO		0xFAD0
+
+/*
+ * ThorLabs USB motor drivers
+ */
+#define FTDI_THORLABS_PID		0xfaf0 /* ThorLabs USB motor drivers */
+
+/*
+ * Protego product ids
+ */
+#define PROTEGO_SPECIAL_1	0xFC70	/* special/unknown device */
+#define PROTEGO_R2X0		0xFC71	/* R200-USB TRNG unit (R210, R220, and R230) */
+#define PROTEGO_SPECIAL_3	0xFC72	/* special/unknown device */
+#define PROTEGO_SPECIAL_4	0xFC73	/* special/unknown device */
+
+/*
+ * Sony Ericsson product ids
+ */
+#define FTDI_DSS20_PID		0xFC82	/* DSS-20 Sync Station for Sony Ericsson P800 */
+#define FTDI_URBAN_0_PID	0xFC8A	/* Sony Ericsson Urban, uart #0 */
+#define FTDI_URBAN_1_PID	0xFC8B	/* Sony Ericsson Urban, uart #1 */
+
+/* www.irtrans.de device */
+#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
+
+/*
+ * RM Michaelides CANview USB (http://www.rmcan.com) (FTDI_VID)
+ * CAN fieldbus interface adapter, added by port GmbH www.port.de)
+ * Ian Abbott changed the macro names for consistency.
+ */
+#define FTDI_RM_CANVIEW_PID	0xfd60	/* Product Id */
+/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
+#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
+
+#define FTDI_USBX_707_PID 0xF857	/* ADSTech IR Blaster USBX-707 (FTDI_VID) */
+
+#define FTDI_RELAIS_PID	0xFA10  /* Relais device from Rudolf Gugler */
+
+/*
+ * PCDJ use ftdi based dj-controllers. The following PID is
+ * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp
+ * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen)
+ */
+#define FTDI_PCDJ_DAC2_PID 0xFA88
+
+#define FTDI_R2000KU_TRUE_RNG	0xFB80  /* R2000KU TRUE RNG (FTDI_VID) */
+
+/*
+ * DIEBOLD BCS SE923 (FTDI_VID)
+ */
+#define DIEBOLD_BCS_SE923_PID	0xfb99
+
+/* www.crystalfontz.com devices
+ * - thanx for providing free devices for evaluation !
+ * they use the ftdi chipset for the USB interface
+ * and the vendor id is the same
+ */
+#define FTDI_XF_632_PID 0xFC08	/* 632: 16x2 Character Display */
+#define FTDI_XF_634_PID 0xFC09	/* 634: 20x4 Character Display */
+#define FTDI_XF_547_PID 0xFC0A	/* 547: Two line Display */
+#define FTDI_XF_633_PID 0xFC0B	/* 633: 16x2 Character Display with Keys */
+#define FTDI_XF_631_PID 0xFC0C	/* 631: 20x2 Character Display */
+#define FTDI_XF_635_PID 0xFC0D	/* 635: 20x4 Character Display */
+#define FTDI_XF_640_PID 0xFC0E	/* 640: Two line Display */
+#define FTDI_XF_642_PID 0xFC0F	/* 642: Two line Display */
+
+/*
+ * Video Networks Limited / Homechoice in the UK use an ftdi-based device
+ * for their 1Mb broadband internet service.  The following PID is exhibited
+ * by the usb device supplied (the VID is the standard ftdi vid (FTDI_VID)
+ */
+#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
+
+/* AlphaMicro Components AMC-232USB01 device (FTDI_VID) */
+#define FTDI_AMC232_PID 0xFF00 /* Product Id */
+
+/*
+ * IBS elektronik product ids (FTDI_VID)
+ * Submitted by Thomas Schleusener
+ */
+#define FTDI_IBS_US485_PID	0xff38  /* IBS US485 (USB<-->RS422/485 interface) */
+#define FTDI_IBS_PICPRO_PID	0xff39  /* IBS PIC-Programmer */
+#define FTDI_IBS_PCMCIA_PID	0xff3a  /* IBS Card reader for PCMCIA SRAM-cards */
+#define FTDI_IBS_PK1_PID	0xff3b  /* IBS PK1 - Particel counter */
+#define FTDI_IBS_RS232MON_PID	0xff3c  /* IBS RS232 - Monitor */
+#define FTDI_IBS_APP70_PID	0xff3d  /* APP 70 (dust monitoring system) */
+#define FTDI_IBS_PEDO_PID	0xff3e  /* IBS PEDO-Modem (RF modem 868.35 MHz) */
+#define FTDI_IBS_PROD_PID	0xff3f  /* future device */
+/* www.canusb.com Lawicel CANUSB device (FTDI_VID) */
+#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
+
+/*
+ * TavIR AVR product ids (FTDI_VID)
+ */
+#define FTDI_TAVIR_STK500_PID	0xFA33	/* STK500 AVR programmer */
+
+/*
+ * TIAO product ids (FTDI_VID)
+ * http://www.tiaowiki.com/w/Main_Page
+ */
+#define FTDI_TIAO_UMPA_PID	0x8a98	/* TIAO/DIYGADGET USB Multi-Protocol Adapter */
+
+/*
+ * NovaTech product ids (FTDI_VID)
+ */
+#define FTDI_NT_ORIONLXM_PID		0x7c90	/* OrionLXm Substation Automation Platform */
+#define FTDI_NT_ORIONLX_PLUS_PID	0x7c91	/* OrionLX+ Substation Automation Platform */
+#define FTDI_NT_ORION_IO_PID		0x7c92	/* Orion I/O */
+#define FTDI_NT_ORIONMX_PID		0x7c93	/* OrionMX */
+
+/*
+ * Synapse Wireless product ids (FTDI_VID)
+ * http://www.synapse-wireless.com
+ */
+#define FTDI_SYNAPSE_SS200_PID 0x9090 /* SS200 - SNAP Stick 200 */
+
+/*
+ * CustomWare / ShipModul NMEA multiplexers product ids (FTDI_VID)
+ */
+#define FTDI_CUSTOMWARE_MINIPLEX_PID	0xfd48	/* MiniPlex first generation NMEA Multiplexer */
+#define FTDI_CUSTOMWARE_MINIPLEX2_PID	0xfd49	/* MiniPlex-USB and MiniPlex-2 series */
+#define FTDI_CUSTOMWARE_MINIPLEX2WI_PID	0xfd4a	/* MiniPlex-2Wi */
+#define FTDI_CUSTOMWARE_MINIPLEX3_PID	0xfd4b	/* MiniPlex-3 series */
+
+
+/********************************/
+/** third-party VID/PID combos **/
+/********************************/
+
+
+
+/*
+ * Atmel STK541
+ */
+#define ATMEL_VID		0x03eb /* Vendor ID */
+#define STK541_PID		0x2109 /* Zigbee Controller */
+
+/*
+ * Texas Instruments
+ */
+#define TI_VID			0x0451
+#define TI_CC3200_LAUNCHPAD_PID	0xC32A /* SimpleLink Wi-Fi CC3200 LaunchPad */
+
+/*
+ * Blackfin gnICE JTAG
+ * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
+ */
+#define ADI_VID			0x0456
+#define ADI_GNICE_PID		0xF000
+#define ADI_GNICEPLUS_PID	0xF001
+
+/*
+ * Cypress WICED USB UART
+ */
+#define CYPRESS_VID			0x04B4
+#define CYPRESS_WICED_BT_USB_PID	0x009B
+#define CYPRESS_WICED_WL_USB_PID	0xF900
+
+/*
+ * Microchip Technology, Inc.
+ *
+ * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are
+ * used by single function CDC ACM class based firmware demo
+ * applications.  The VID/PID has also been used in firmware
+ * emulating FTDI serial chips by:
+ * Hornby Elite - Digital Command Control Console
+ * http://www.hornby.com/hornby-dcc/controllers/
+ */
+#define MICROCHIP_VID		0x04D8
+#define MICROCHIP_USB_BOARD_PID	0x000A /* CDC RS-232 Emulation Demo */
+
+/*
+ * RATOC REX-USB60F
+ */
+#define RATOC_VENDOR_ID		0x0584
+#define RATOC_PRODUCT_ID_USB60F	0xb020
+#define RATOC_PRODUCT_ID_SCU18	0xb03a
+
+/*
+ * Infineon Technologies
+ */
+#define INFINEON_VID		        0x058b
+#define INFINEON_TRIBOARD_TC1798_PID	0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */
+#define INFINEON_TRIBOARD_TC2X7_PID	0x0043 /* DAS JTAG TriBoard TC2X7 V1.0 */
+
+/*
+ * Omron corporation (https://www.omron.com)
+ */
+ #define OMRON_VID			0x0590
+ #define OMRON_CS1W_CIF31_PID		0x00b2
+
+/*
+ * Acton Research Corp.
+ */
+#define ACTON_VID		0x0647	/* Vendor ID */
+#define ACTON_SPECTRAPRO_PID	0x0100
+
+/*
+ * Contec products (http://www.contec.com)
+ * Submitted by Daniel Sangorrin
+ */
+#define CONTEC_VID		0x06CE	/* Vendor ID */
+#define CONTEC_COM1USBH_PID	0x8311	/* COM-1(USB)H */
+
+/*
+ * Mitsubishi Electric Corp. (http://www.meau.com)
+ * Submitted by Konstantin Holoborodko
+ */
+#define MITSUBISHI_VID		0x06D3
+#define MITSUBISHI_FXUSB_PID	0x0284 /* USB/RS422 converters: FX-USB-AW/-BD */
+
+/*
+ * Definitions for B&B Electronics products.
+ */
+#define BANDB_VID		0x0856	/* B&B Electronics Vendor ID */
+#define BANDB_USOTL4_PID	0xAC01	/* USOTL4 Isolated RS-485 Converter */
+#define BANDB_USTL4_PID		0xAC02	/* USTL4 RS-485 Converter */
+#define BANDB_USO9ML2_PID	0xAC03	/* USO9ML2 Isolated RS-232 Converter */
+#define BANDB_USOPTL4_PID	0xAC11
+#define BANDB_USPTL4_PID	0xAC12
+#define BANDB_USO9ML2DR_2_PID	0xAC16
+#define BANDB_USO9ML2DR_PID	0xAC17
+#define BANDB_USOPTL4DR2_PID	0xAC18	/* USOPTL4R-2 2-port Isolated RS-232 Converter */
+#define BANDB_USOPTL4DR_PID	0xAC19
+#define BANDB_485USB9F_2W_PID	0xAC25
+#define BANDB_485USB9F_4W_PID	0xAC26
+#define BANDB_232USB9M_PID	0xAC27
+#define BANDB_485USBTB_2W_PID	0xAC33
+#define BANDB_485USBTB_4W_PID	0xAC34
+#define BANDB_TTL5USB9M_PID	0xAC49
+#define BANDB_TTL3USB9M_PID	0xAC50
+#define BANDB_ZZ_PROG1_USB_PID	0xBA02
+
+/*
+ * Echelon USB Serial Interface
+ */
+#define ECHELON_VID		0x0920
+#define ECHELON_U20_PID		0x7500
+
+/*
+ * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
+ */
+#define INTREPID_VID		0x093C
+#define INTREPID_VALUECAN_PID	0x0601
+#define INTREPID_NEOVI_PID	0x0701
+
+/*
+ * WICED USB UART
+ */
+#define WICED_VID		0x0A5C
+#define WICED_USB20706V2_PID	0x6422
+
+/*
+ * Definitions for ID TECH (www.idt-net.com) devices
+ */
+#define IDTECH_VID		0x0ACD	/* ID TECH Vendor ID */
+#define IDTECH_IDT1221U_PID	0x0300	/* IDT1221U USB to RS-232 adapter */
+
+/*
+ * Definitions for Omnidirectional Control Technology, Inc. devices
+ */
+#define OCT_VID			0x0B39	/* OCT vendor ID */
+/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
+/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
+/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
+#define OCT_DK201_PID		0x0103	/* OCT DK201 USB docking station */
+#define OCT_US101_PID		0x0421	/* OCT US101 USB to RS-232 */
+
+/*
+ * Definitions for Icom Inc. devices
+ */
+#define ICOM_VID		0x0C26 /* Icom vendor ID */
+/* Note: ID-1 is a communications tranceiver for HAM-radio operators */
+#define ICOM_ID_1_PID		0x0004 /* ID-1 USB to RS-232 */
+/* Note: OPC is an Optional cable to connect an Icom Tranceiver */
+#define ICOM_OPC_U_UC_PID	0x0018 /* OPC-478UC, OPC-1122U cloning cable */
+/* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */
+#define ICOM_ID_RP2C1_PID	0x0009 /* ID-RP2C Asset 1 to RS-232 */
+#define ICOM_ID_RP2C2_PID	0x000A /* ID-RP2C Asset 2 to RS-232 */
+#define ICOM_ID_RP2D_PID	0x000B /* ID-RP2D configuration port*/
+#define ICOM_ID_RP2VT_PID	0x000C /* ID-RP2V Transmit config port */
+#define ICOM_ID_RP2VR_PID	0x000D /* ID-RP2V Receive config port */
+#define ICOM_ID_RP4KVT_PID	0x0010 /* ID-RP4000V Transmit config port */
+#define ICOM_ID_RP4KVR_PID	0x0011 /* ID-RP4000V Receive config port */
+#define ICOM_ID_RP2KVT_PID	0x0012 /* ID-RP2000V Transmit config port */
+#define ICOM_ID_RP2KVR_PID	0x0013 /* ID-RP2000V Receive config port */
+
+/*
+ * GN Otometrics (http://www.otometrics.com)
+ * Submitted by Ville Sundberg.
+ */
+#define GN_OTOMETRICS_VID	0x0c33	/* Vendor ID */
+#define AURICAL_USB_PID		0x0010	/* Aurical USB Audiometer */
+
+/*
+ * The following are the values for the Sealevel SeaLINK+ adapters.
+ * (Original list sent by Tuan Hoang.  Ian Abbott renamed the macros and
+ * removed some PIDs that don't seem to match any existing products.)
+ */
+#define SEALEVEL_VID		0x0c52	/* Sealevel Vendor ID */
+#define SEALEVEL_2101_PID	0x2101	/* SeaLINK+232 (2101/2105) */
+#define SEALEVEL_2102_PID	0x2102	/* SeaLINK+485 (2102) */
+#define SEALEVEL_2103_PID	0x2103	/* SeaLINK+232I (2103) */
+#define SEALEVEL_2104_PID	0x2104	/* SeaLINK+485I (2104) */
+#define SEALEVEL_2106_PID	0x9020	/* SeaLINK+422 (2106) */
+#define SEALEVEL_2201_1_PID	0x2211	/* SeaPORT+2/232 (2201) Port 1 */
+#define SEALEVEL_2201_2_PID	0x2221	/* SeaPORT+2/232 (2201) Port 2 */
+#define SEALEVEL_2202_1_PID	0x2212	/* SeaPORT+2/485 (2202) Port 1 */
+#define SEALEVEL_2202_2_PID	0x2222	/* SeaPORT+2/485 (2202) Port 2 */
+#define SEALEVEL_2203_1_PID	0x2213	/* SeaPORT+2 (2203) Port 1 */
+#define SEALEVEL_2203_2_PID	0x2223	/* SeaPORT+2 (2203) Port 2 */
+#define SEALEVEL_2401_1_PID	0x2411	/* SeaPORT+4/232 (2401) Port 1 */
+#define SEALEVEL_2401_2_PID	0x2421	/* SeaPORT+4/232 (2401) Port 2 */
+#define SEALEVEL_2401_3_PID	0x2431	/* SeaPORT+4/232 (2401) Port 3 */
+#define SEALEVEL_2401_4_PID	0x2441	/* SeaPORT+4/232 (2401) Port 4 */
+#define SEALEVEL_2402_1_PID	0x2412	/* SeaPORT+4/485 (2402) Port 1 */
+#define SEALEVEL_2402_2_PID	0x2422	/* SeaPORT+4/485 (2402) Port 2 */
+#define SEALEVEL_2402_3_PID	0x2432	/* SeaPORT+4/485 (2402) Port 3 */
+#define SEALEVEL_2402_4_PID	0x2442	/* SeaPORT+4/485 (2402) Port 4 */
+#define SEALEVEL_2403_1_PID	0x2413	/* SeaPORT+4 (2403) Port 1 */
+#define SEALEVEL_2403_2_PID	0x2423	/* SeaPORT+4 (2403) Port 2 */
+#define SEALEVEL_2403_3_PID	0x2433	/* SeaPORT+4 (2403) Port 3 */
+#define SEALEVEL_2403_4_PID	0x2443	/* SeaPORT+4 (2403) Port 4 */
+#define SEALEVEL_2801_1_PID	0X2811	/* SeaLINK+8/232 (2801) Port 1 */
+#define SEALEVEL_2801_2_PID	0X2821	/* SeaLINK+8/232 (2801) Port 2 */
+#define SEALEVEL_2801_3_PID	0X2831	/* SeaLINK+8/232 (2801) Port 3 */
+#define SEALEVEL_2801_4_PID	0X2841	/* SeaLINK+8/232 (2801) Port 4 */
+#define SEALEVEL_2801_5_PID	0X2851	/* SeaLINK+8/232 (2801) Port 5 */
+#define SEALEVEL_2801_6_PID	0X2861	/* SeaLINK+8/232 (2801) Port 6 */
+#define SEALEVEL_2801_7_PID	0X2871	/* SeaLINK+8/232 (2801) Port 7 */
+#define SEALEVEL_2801_8_PID	0X2881	/* SeaLINK+8/232 (2801) Port 8 */
+#define SEALEVEL_2802_1_PID	0X2812	/* SeaLINK+8/485 (2802) Port 1 */
+#define SEALEVEL_2802_2_PID	0X2822	/* SeaLINK+8/485 (2802) Port 2 */
+#define SEALEVEL_2802_3_PID	0X2832	/* SeaLINK+8/485 (2802) Port 3 */
+#define SEALEVEL_2802_4_PID	0X2842	/* SeaLINK+8/485 (2802) Port 4 */
+#define SEALEVEL_2802_5_PID	0X2852	/* SeaLINK+8/485 (2802) Port 5 */
+#define SEALEVEL_2802_6_PID	0X2862	/* SeaLINK+8/485 (2802) Port 6 */
+#define SEALEVEL_2802_7_PID	0X2872	/* SeaLINK+8/485 (2802) Port 7 */
+#define SEALEVEL_2802_8_PID	0X2882	/* SeaLINK+8/485 (2802) Port 8 */
+#define SEALEVEL_2803_1_PID	0X2813	/* SeaLINK+8 (2803) Port 1 */
+#define SEALEVEL_2803_2_PID	0X2823	/* SeaLINK+8 (2803) Port 2 */
+#define SEALEVEL_2803_3_PID	0X2833	/* SeaLINK+8 (2803) Port 3 */
+#define SEALEVEL_2803_4_PID	0X2843	/* SeaLINK+8 (2803) Port 4 */
+#define SEALEVEL_2803_5_PID	0X2853	/* SeaLINK+8 (2803) Port 5 */
+#define SEALEVEL_2803_6_PID	0X2863	/* SeaLINK+8 (2803) Port 6 */
+#define SEALEVEL_2803_7_PID	0X2873	/* SeaLINK+8 (2803) Port 7 */
+#define SEALEVEL_2803_8_PID	0X2883	/* SeaLINK+8 (2803) Port 8 */
+#define SEALEVEL_2803R_1_PID	0Xa02a	/* SeaLINK+8 (2803-ROHS) Port 1+2 */
+#define SEALEVEL_2803R_2_PID	0Xa02b	/* SeaLINK+8 (2803-ROHS) Port 3+4 */
+#define SEALEVEL_2803R_3_PID	0Xa02c	/* SeaLINK+8 (2803-ROHS) Port 5+6 */
+#define SEALEVEL_2803R_4_PID	0Xa02d	/* SeaLINK+8 (2803-ROHS) Port 7+8 */
+
+/*
+ * JETI SPECTROMETER SPECBOS 1201
+ * http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101
+ */
+#define JETI_VID		0x0c6c
+#define JETI_SPC1201_PID	0x04b2
+
+/*
+ * FTDI USB UART chips used in construction projects from the
+ * Elektor Electronics magazine (http://www.elektor.com/)
+ */
+#define ELEKTOR_VID		0x0C7D
+#define ELEKTOR_FT323R_PID	0x0005	/* RFID-Reader, issue 09-2006 */
+
+/*
+ * Posiflex inc retail equipment (http://www.posiflex.com.tw)
+ */
+#define POSIFLEX_VID		0x0d3a  /* Vendor ID */
+#define POSIFLEX_PP7000_PID	0x0300  /* PP-7000II thermal printer */
+
+/*
+ * The following are the values for two KOBIL chipcard terminals.
+ */
+#define KOBIL_VID		0x0d46	/* KOBIL Vendor ID */
+#define KOBIL_CONV_B1_PID	0x2020	/* KOBIL Konverter for B1 */
+#define KOBIL_CONV_KAAN_PID	0x2021	/* KOBIL_Konverter for KAAN */
+
+#define FTDI_NF_RIC_VID	0x0DCD	/* Vendor Id */
+#define FTDI_NF_RIC_PID	0x0001	/* Product Id */
+
+/*
+ * Falcom Wireless Communications GmbH
+ */
+#define FALCOM_VID		0x0F94	/* Vendor Id */
+#define FALCOM_TWIST_PID	0x0001	/* Falcom Twist USB GPRS modem */
+#define FALCOM_SAMBA_PID	0x0005	/* Falcom Samba USB GPRS modem */
+
+/* Larsen and Brusgaard AltiTrack/USBtrack */
+#define LARSENBRUSGAARD_VID		0x0FD8
+#define LB_ALTITRACK_PID		0x0001
+
+/*
+ * TTi (Thurlby Thandar Instruments)
+ */
+#define TTI_VID			0x103E	/* Vendor Id */
+#define TTI_QL355P_PID		0x03E8	/* TTi QL355P power supply */
+
+/*
+ * Newport Cooperation (www.newport.com)
+ */
+#define NEWPORT_VID			0x104D
+#define NEWPORT_AGILIS_PID		0x3000
+#define NEWPORT_CONEX_CC_PID		0x3002
+#define NEWPORT_CONEX_AGP_PID		0x3006
+
+/* Interbiometrics USB I/O Board */
+/* Developed for Interbiometrics by Rudolf Gugler */
+#define INTERBIOMETRICS_VID              0x1209
+#define INTERBIOMETRICS_IOBOARD_PID      0x1002
+#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
+
+/*
+ * Testo products (http://www.testo.com/)
+ * Submitted by Colin Leroy
+ */
+#define TESTO_VID			0x128D
+#define TESTO_1_PID			0x0001
+#define TESTO_3_PID			0x0003
+
+/*
+ * Mobility Electronics products.
+ */
+#define MOBILITY_VID			0x1342
+#define MOBILITY_USB_SERIAL_PID		0x0202	/* EasiDock USB 200 serial */
+
+/*
+ * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
+ * Submitted by Harald Welte <laforge@openmoko.org>
+ */
+#define	FIC_VID			0x1457
+#define	FIC_NEO1973_DEBUG_PID	0x5118
+
+/*
+ * Actel / Microsemi
+ */
+#define ACTEL_VID				0x1514
+#define MICROSEMI_ARROW_SF2PLUS_BOARD_PID	0x2008
+
+/* Olimex */
+#define OLIMEX_VID			0x15BA
+#define OLIMEX_ARM_USB_OCD_PID		0x0003
+#define OLIMEX_ARM_USB_TINY_PID	0x0004
+#define OLIMEX_ARM_USB_TINY_H_PID	0x002a
+#define OLIMEX_ARM_USB_OCD_H_PID	0x002b
+
+/*
+ * Telldus Technologies
+ */
+#define TELLDUS_VID			0x1781	/* Vendor ID */
+#define TELLDUS_TELLSTICK_PID		0x0C30	/* RF control dongle 433 MHz using FT232RL */
+
+/*
+ * NOVITUS printers
+ */
+#define NOVITUS_VID			0x1a28
+#define NOVITUS_BONO_E_PID		0x6010
+
+/*
+ * ICPDAS I-756*U devices
+ */
+#define ICPDAS_VID			0x1b5c
+#define ICPDAS_I7560U_PID		0x0103
+#define ICPDAS_I7561U_PID		0x0104
+#define ICPDAS_I7563U_PID		0x0105
+
+/*
+ * Airbus Defence and Space
+ */
+#define AIRBUS_DS_VID			0x1e8e  /* Vendor ID */
+#define AIRBUS_DS_P8GR			0x6001  /* Tetra P8GR */
+
+/*
+ * RT Systems programming cables for various ham radios
+ */
+/* This device uses the VID of FTDI */
+#define RTSYSTEMS_USB_VX8_PID   0x9e50  /* USB-VX8 USB to 7 pin modular plug for Yaesu VX-8 radio */
+
+#define RTSYSTEMS_VID		0x2100	/* Vendor ID */
+#define RTSYSTEMS_USB_S03_PID	0x9001	/* RTS-03 USB to Serial Adapter */
+#define RTSYSTEMS_USB_59_PID	0x9e50	/* USB-59 USB to 8 pin plug */
+#define RTSYSTEMS_USB_57A_PID	0x9e51	/* USB-57A USB to 4pin 3.5mm plug */
+#define RTSYSTEMS_USB_57B_PID	0x9e52	/* USB-57B USB to extended 4pin 3.5mm plug */
+#define RTSYSTEMS_USB_29A_PID	0x9e53	/* USB-29A USB to 3.5mm stereo plug */
+#define RTSYSTEMS_USB_29B_PID	0x9e54	/* USB-29B USB to 6 pin mini din */
+#define RTSYSTEMS_USB_29F_PID	0x9e55	/* USB-29F USB to 6 pin modular plug */
+#define RTSYSTEMS_USB_62B_PID	0x9e56	/* USB-62B USB to 8 pin mini din plug*/
+#define RTSYSTEMS_USB_S01_PID	0x9e57	/* USB-RTS01 USB to 3.5 mm stereo plug*/
+#define RTSYSTEMS_USB_63_PID	0x9e58	/* USB-63 USB to 9 pin female*/
+#define RTSYSTEMS_USB_29C_PID	0x9e59	/* USB-29C USB to 4 pin modular plug*/
+#define RTSYSTEMS_USB_81B_PID	0x9e5A	/* USB-81 USB to 8 pin mini din plug*/
+#define RTSYSTEMS_USB_82B_PID	0x9e5B	/* USB-82 USB to 2.5 mm stereo plug*/
+#define RTSYSTEMS_USB_K5D_PID	0x9e5C	/* USB-K5D USB to 8 pin modular plug*/
+#define RTSYSTEMS_USB_K4Y_PID	0x9e5D	/* USB-K4Y USB to 2.5/3.5 mm plugs*/
+#define RTSYSTEMS_USB_K5G_PID	0x9e5E	/* USB-K5G USB to 8 pin modular plug*/
+#define RTSYSTEMS_USB_S05_PID	0x9e5F	/* USB-RTS05 USB to 2.5 mm stereo plug*/
+#define RTSYSTEMS_USB_60_PID	0x9e60	/* USB-60 USB to 6 pin din*/
+#define RTSYSTEMS_USB_61_PID	0x9e61	/* USB-61 USB to 6 pin mini din*/
+#define RTSYSTEMS_USB_62_PID	0x9e62	/* USB-62 USB to 8 pin mini din*/
+#define RTSYSTEMS_USB_63B_PID	0x9e63	/* USB-63 USB to 9 pin female*/
+#define RTSYSTEMS_USB_64_PID	0x9e64	/* USB-64 USB to 9 pin male*/
+#define RTSYSTEMS_USB_65_PID	0x9e65	/* USB-65 USB to 9 pin female null modem*/
+#define RTSYSTEMS_USB_92_PID	0x9e66	/* USB-92 USB to 12 pin plug*/
+#define RTSYSTEMS_USB_92D_PID	0x9e67	/* USB-92D USB to 12 pin plug data*/
+#define RTSYSTEMS_USB_W5R_PID	0x9e68	/* USB-W5R USB to 8 pin modular plug*/
+#define RTSYSTEMS_USB_A5R_PID	0x9e69	/* USB-A5R USB to 8 pin modular plug*/
+#define RTSYSTEMS_USB_PW1_PID	0x9e6A	/* USB-PW1 USB to 8 pin modular plug*/
+
+/*
+ * Physik Instrumente
+ * http://www.physikinstrumente.com/en/products/
+ */
+/* These two devices use the VID of FTDI */
+#define PI_C865_PID	0xe0a0  /* PI C-865 Piezomotor Controller */
+#define PI_C857_PID	0xe0a1  /* PI Encoder Trigger Box */
+
+#define PI_VID              0x1a72  /* Vendor ID */
+#define PI_C866_PID	0x1000  /* PI C-866 Piezomotor Controller */
+#define PI_C663_PID	0x1001  /* PI C-663 Mercury-Step */
+#define PI_C725_PID	0x1002  /* PI C-725 Piezomotor Controller */
+#define PI_E517_PID	0x1005  /* PI E-517 Digital Piezo Controller Operation Module */
+#define PI_C863_PID	0x1007  /* PI C-863 */
+#define PI_E861_PID	0x1008  /* PI E-861 Piezomotor Controller */
+#define PI_C867_PID	0x1009  /* PI C-867 Piezomotor Controller */
+#define PI_E609_PID	0x100D  /* PI E-609 Digital Piezo Controller */
+#define PI_E709_PID	0x100E  /* PI E-709 Digital Piezo Controller */
+#define PI_100F_PID	0x100F  /* PI Digital Piezo Controller */
+#define PI_1011_PID	0x1011  /* PI Digital Piezo Controller */
+#define PI_1012_PID	0x1012  /* PI Motion Controller */
+#define PI_1013_PID	0x1013  /* PI Motion Controller */
+#define PI_1014_PID	0x1014  /* PI Device */
+#define PI_1015_PID	0x1015  /* PI Device */
+#define PI_1016_PID	0x1016  /* PI Digital Servo Module */
+
+/*
+ * Kondo Kagaku Co.Ltd.
+ * http://www.kondo-robot.com/EN
+ */
+#define KONDO_VID 		0x165c
+#define KONDO_USB_SERIAL_PID	0x0002
+
+/*
+ * Bayer Ascensia Contour blood glucose meter USB-converter cable.
+ * http://winglucofacts.com/cables/
+ */
+#define BAYER_VID                      0x1A79
+#define BAYER_CONTOUR_CABLE_PID        0x6001
+
+/*
+ * Matrix Orbital Intelligent USB displays.
+ * http://www.matrixorbital.com
+ */
+#define MTXORB_VID			0x1B3D
+#define MTXORB_FTDI_RANGE_0100_PID	0x0100
+#define MTXORB_FTDI_RANGE_0101_PID	0x0101
+#define MTXORB_FTDI_RANGE_0102_PID	0x0102
+#define MTXORB_FTDI_RANGE_0103_PID	0x0103
+#define MTXORB_FTDI_RANGE_0104_PID	0x0104
+#define MTXORB_FTDI_RANGE_0105_PID	0x0105
+#define MTXORB_FTDI_RANGE_0106_PID	0x0106
+#define MTXORB_FTDI_RANGE_0107_PID	0x0107
+#define MTXORB_FTDI_RANGE_0108_PID	0x0108
+#define MTXORB_FTDI_RANGE_0109_PID	0x0109
+#define MTXORB_FTDI_RANGE_010A_PID	0x010A
+#define MTXORB_FTDI_RANGE_010B_PID	0x010B
+#define MTXORB_FTDI_RANGE_010C_PID	0x010C
+#define MTXORB_FTDI_RANGE_010D_PID	0x010D
+#define MTXORB_FTDI_RANGE_010E_PID	0x010E
+#define MTXORB_FTDI_RANGE_010F_PID	0x010F
+#define MTXORB_FTDI_RANGE_0110_PID	0x0110
+#define MTXORB_FTDI_RANGE_0111_PID	0x0111
+#define MTXORB_FTDI_RANGE_0112_PID	0x0112
+#define MTXORB_FTDI_RANGE_0113_PID	0x0113
+#define MTXORB_FTDI_RANGE_0114_PID	0x0114
+#define MTXORB_FTDI_RANGE_0115_PID	0x0115
+#define MTXORB_FTDI_RANGE_0116_PID	0x0116
+#define MTXORB_FTDI_RANGE_0117_PID	0x0117
+#define MTXORB_FTDI_RANGE_0118_PID	0x0118
+#define MTXORB_FTDI_RANGE_0119_PID	0x0119
+#define MTXORB_FTDI_RANGE_011A_PID	0x011A
+#define MTXORB_FTDI_RANGE_011B_PID	0x011B
+#define MTXORB_FTDI_RANGE_011C_PID	0x011C
+#define MTXORB_FTDI_RANGE_011D_PID	0x011D
+#define MTXORB_FTDI_RANGE_011E_PID	0x011E
+#define MTXORB_FTDI_RANGE_011F_PID	0x011F
+#define MTXORB_FTDI_RANGE_0120_PID	0x0120
+#define MTXORB_FTDI_RANGE_0121_PID	0x0121
+#define MTXORB_FTDI_RANGE_0122_PID	0x0122
+#define MTXORB_FTDI_RANGE_0123_PID	0x0123
+#define MTXORB_FTDI_RANGE_0124_PID	0x0124
+#define MTXORB_FTDI_RANGE_0125_PID	0x0125
+#define MTXORB_FTDI_RANGE_0126_PID	0x0126
+#define MTXORB_FTDI_RANGE_0127_PID	0x0127
+#define MTXORB_FTDI_RANGE_0128_PID	0x0128
+#define MTXORB_FTDI_RANGE_0129_PID	0x0129
+#define MTXORB_FTDI_RANGE_012A_PID	0x012A
+#define MTXORB_FTDI_RANGE_012B_PID	0x012B
+#define MTXORB_FTDI_RANGE_012C_PID	0x012C
+#define MTXORB_FTDI_RANGE_012D_PID	0x012D
+#define MTXORB_FTDI_RANGE_012E_PID	0x012E
+#define MTXORB_FTDI_RANGE_012F_PID	0x012F
+#define MTXORB_FTDI_RANGE_0130_PID	0x0130
+#define MTXORB_FTDI_RANGE_0131_PID	0x0131
+#define MTXORB_FTDI_RANGE_0132_PID	0x0132
+#define MTXORB_FTDI_RANGE_0133_PID	0x0133
+#define MTXORB_FTDI_RANGE_0134_PID	0x0134
+#define MTXORB_FTDI_RANGE_0135_PID	0x0135
+#define MTXORB_FTDI_RANGE_0136_PID	0x0136
+#define MTXORB_FTDI_RANGE_0137_PID	0x0137
+#define MTXORB_FTDI_RANGE_0138_PID	0x0138
+#define MTXORB_FTDI_RANGE_0139_PID	0x0139
+#define MTXORB_FTDI_RANGE_013A_PID	0x013A
+#define MTXORB_FTDI_RANGE_013B_PID	0x013B
+#define MTXORB_FTDI_RANGE_013C_PID	0x013C
+#define MTXORB_FTDI_RANGE_013D_PID	0x013D
+#define MTXORB_FTDI_RANGE_013E_PID	0x013E
+#define MTXORB_FTDI_RANGE_013F_PID	0x013F
+#define MTXORB_FTDI_RANGE_0140_PID	0x0140
+#define MTXORB_FTDI_RANGE_0141_PID	0x0141
+#define MTXORB_FTDI_RANGE_0142_PID	0x0142
+#define MTXORB_FTDI_RANGE_0143_PID	0x0143
+#define MTXORB_FTDI_RANGE_0144_PID	0x0144
+#define MTXORB_FTDI_RANGE_0145_PID	0x0145
+#define MTXORB_FTDI_RANGE_0146_PID	0x0146
+#define MTXORB_FTDI_RANGE_0147_PID	0x0147
+#define MTXORB_FTDI_RANGE_0148_PID	0x0148
+#define MTXORB_FTDI_RANGE_0149_PID	0x0149
+#define MTXORB_FTDI_RANGE_014A_PID	0x014A
+#define MTXORB_FTDI_RANGE_014B_PID	0x014B
+#define MTXORB_FTDI_RANGE_014C_PID	0x014C
+#define MTXORB_FTDI_RANGE_014D_PID	0x014D
+#define MTXORB_FTDI_RANGE_014E_PID	0x014E
+#define MTXORB_FTDI_RANGE_014F_PID	0x014F
+#define MTXORB_FTDI_RANGE_0150_PID	0x0150
+#define MTXORB_FTDI_RANGE_0151_PID	0x0151
+#define MTXORB_FTDI_RANGE_0152_PID	0x0152
+#define MTXORB_FTDI_RANGE_0153_PID	0x0153
+#define MTXORB_FTDI_RANGE_0154_PID	0x0154
+#define MTXORB_FTDI_RANGE_0155_PID	0x0155
+#define MTXORB_FTDI_RANGE_0156_PID	0x0156
+#define MTXORB_FTDI_RANGE_0157_PID	0x0157
+#define MTXORB_FTDI_RANGE_0158_PID	0x0158
+#define MTXORB_FTDI_RANGE_0159_PID	0x0159
+#define MTXORB_FTDI_RANGE_015A_PID	0x015A
+#define MTXORB_FTDI_RANGE_015B_PID	0x015B
+#define MTXORB_FTDI_RANGE_015C_PID	0x015C
+#define MTXORB_FTDI_RANGE_015D_PID	0x015D
+#define MTXORB_FTDI_RANGE_015E_PID	0x015E
+#define MTXORB_FTDI_RANGE_015F_PID	0x015F
+#define MTXORB_FTDI_RANGE_0160_PID	0x0160
+#define MTXORB_FTDI_RANGE_0161_PID	0x0161
+#define MTXORB_FTDI_RANGE_0162_PID	0x0162
+#define MTXORB_FTDI_RANGE_0163_PID	0x0163
+#define MTXORB_FTDI_RANGE_0164_PID	0x0164
+#define MTXORB_FTDI_RANGE_0165_PID	0x0165
+#define MTXORB_FTDI_RANGE_0166_PID	0x0166
+#define MTXORB_FTDI_RANGE_0167_PID	0x0167
+#define MTXORB_FTDI_RANGE_0168_PID	0x0168
+#define MTXORB_FTDI_RANGE_0169_PID	0x0169
+#define MTXORB_FTDI_RANGE_016A_PID	0x016A
+#define MTXORB_FTDI_RANGE_016B_PID	0x016B
+#define MTXORB_FTDI_RANGE_016C_PID	0x016C
+#define MTXORB_FTDI_RANGE_016D_PID	0x016D
+#define MTXORB_FTDI_RANGE_016E_PID	0x016E
+#define MTXORB_FTDI_RANGE_016F_PID	0x016F
+#define MTXORB_FTDI_RANGE_0170_PID	0x0170
+#define MTXORB_FTDI_RANGE_0171_PID	0x0171
+#define MTXORB_FTDI_RANGE_0172_PID	0x0172
+#define MTXORB_FTDI_RANGE_0173_PID	0x0173
+#define MTXORB_FTDI_RANGE_0174_PID	0x0174
+#define MTXORB_FTDI_RANGE_0175_PID	0x0175
+#define MTXORB_FTDI_RANGE_0176_PID	0x0176
+#define MTXORB_FTDI_RANGE_0177_PID	0x0177
+#define MTXORB_FTDI_RANGE_0178_PID	0x0178
+#define MTXORB_FTDI_RANGE_0179_PID	0x0179
+#define MTXORB_FTDI_RANGE_017A_PID	0x017A
+#define MTXORB_FTDI_RANGE_017B_PID	0x017B
+#define MTXORB_FTDI_RANGE_017C_PID	0x017C
+#define MTXORB_FTDI_RANGE_017D_PID	0x017D
+#define MTXORB_FTDI_RANGE_017E_PID	0x017E
+#define MTXORB_FTDI_RANGE_017F_PID	0x017F
+#define MTXORB_FTDI_RANGE_0180_PID	0x0180
+#define MTXORB_FTDI_RANGE_0181_PID	0x0181
+#define MTXORB_FTDI_RANGE_0182_PID	0x0182
+#define MTXORB_FTDI_RANGE_0183_PID	0x0183
+#define MTXORB_FTDI_RANGE_0184_PID	0x0184
+#define MTXORB_FTDI_RANGE_0185_PID	0x0185
+#define MTXORB_FTDI_RANGE_0186_PID	0x0186
+#define MTXORB_FTDI_RANGE_0187_PID	0x0187
+#define MTXORB_FTDI_RANGE_0188_PID	0x0188
+#define MTXORB_FTDI_RANGE_0189_PID	0x0189
+#define MTXORB_FTDI_RANGE_018A_PID	0x018A
+#define MTXORB_FTDI_RANGE_018B_PID	0x018B
+#define MTXORB_FTDI_RANGE_018C_PID	0x018C
+#define MTXORB_FTDI_RANGE_018D_PID	0x018D
+#define MTXORB_FTDI_RANGE_018E_PID	0x018E
+#define MTXORB_FTDI_RANGE_018F_PID	0x018F
+#define MTXORB_FTDI_RANGE_0190_PID	0x0190
+#define MTXORB_FTDI_RANGE_0191_PID	0x0191
+#define MTXORB_FTDI_RANGE_0192_PID	0x0192
+#define MTXORB_FTDI_RANGE_0193_PID	0x0193
+#define MTXORB_FTDI_RANGE_0194_PID	0x0194
+#define MTXORB_FTDI_RANGE_0195_PID	0x0195
+#define MTXORB_FTDI_RANGE_0196_PID	0x0196
+#define MTXORB_FTDI_RANGE_0197_PID	0x0197
+#define MTXORB_FTDI_RANGE_0198_PID	0x0198
+#define MTXORB_FTDI_RANGE_0199_PID	0x0199
+#define MTXORB_FTDI_RANGE_019A_PID	0x019A
+#define MTXORB_FTDI_RANGE_019B_PID	0x019B
+#define MTXORB_FTDI_RANGE_019C_PID	0x019C
+#define MTXORB_FTDI_RANGE_019D_PID	0x019D
+#define MTXORB_FTDI_RANGE_019E_PID	0x019E
+#define MTXORB_FTDI_RANGE_019F_PID	0x019F
+#define MTXORB_FTDI_RANGE_01A0_PID	0x01A0
+#define MTXORB_FTDI_RANGE_01A1_PID	0x01A1
+#define MTXORB_FTDI_RANGE_01A2_PID	0x01A2
+#define MTXORB_FTDI_RANGE_01A3_PID	0x01A3
+#define MTXORB_FTDI_RANGE_01A4_PID	0x01A4
+#define MTXORB_FTDI_RANGE_01A5_PID	0x01A5
+#define MTXORB_FTDI_RANGE_01A6_PID	0x01A6
+#define MTXORB_FTDI_RANGE_01A7_PID	0x01A7
+#define MTXORB_FTDI_RANGE_01A8_PID	0x01A8
+#define MTXORB_FTDI_RANGE_01A9_PID	0x01A9
+#define MTXORB_FTDI_RANGE_01AA_PID	0x01AA
+#define MTXORB_FTDI_RANGE_01AB_PID	0x01AB
+#define MTXORB_FTDI_RANGE_01AC_PID	0x01AC
+#define MTXORB_FTDI_RANGE_01AD_PID	0x01AD
+#define MTXORB_FTDI_RANGE_01AE_PID	0x01AE
+#define MTXORB_FTDI_RANGE_01AF_PID	0x01AF
+#define MTXORB_FTDI_RANGE_01B0_PID	0x01B0
+#define MTXORB_FTDI_RANGE_01B1_PID	0x01B1
+#define MTXORB_FTDI_RANGE_01B2_PID	0x01B2
+#define MTXORB_FTDI_RANGE_01B3_PID	0x01B3
+#define MTXORB_FTDI_RANGE_01B4_PID	0x01B4
+#define MTXORB_FTDI_RANGE_01B5_PID	0x01B5
+#define MTXORB_FTDI_RANGE_01B6_PID	0x01B6
+#define MTXORB_FTDI_RANGE_01B7_PID	0x01B7
+#define MTXORB_FTDI_RANGE_01B8_PID	0x01B8
+#define MTXORB_FTDI_RANGE_01B9_PID	0x01B9
+#define MTXORB_FTDI_RANGE_01BA_PID	0x01BA
+#define MTXORB_FTDI_RANGE_01BB_PID	0x01BB
+#define MTXORB_FTDI_RANGE_01BC_PID	0x01BC
+#define MTXORB_FTDI_RANGE_01BD_PID	0x01BD
+#define MTXORB_FTDI_RANGE_01BE_PID	0x01BE
+#define MTXORB_FTDI_RANGE_01BF_PID	0x01BF
+#define MTXORB_FTDI_RANGE_01C0_PID	0x01C0
+#define MTXORB_FTDI_RANGE_01C1_PID	0x01C1
+#define MTXORB_FTDI_RANGE_01C2_PID	0x01C2
+#define MTXORB_FTDI_RANGE_01C3_PID	0x01C3
+#define MTXORB_FTDI_RANGE_01C4_PID	0x01C4
+#define MTXORB_FTDI_RANGE_01C5_PID	0x01C5
+#define MTXORB_FTDI_RANGE_01C6_PID	0x01C6
+#define MTXORB_FTDI_RANGE_01C7_PID	0x01C7
+#define MTXORB_FTDI_RANGE_01C8_PID	0x01C8
+#define MTXORB_FTDI_RANGE_01C9_PID	0x01C9
+#define MTXORB_FTDI_RANGE_01CA_PID	0x01CA
+#define MTXORB_FTDI_RANGE_01CB_PID	0x01CB
+#define MTXORB_FTDI_RANGE_01CC_PID	0x01CC
+#define MTXORB_FTDI_RANGE_01CD_PID	0x01CD
+#define MTXORB_FTDI_RANGE_01CE_PID	0x01CE
+#define MTXORB_FTDI_RANGE_01CF_PID	0x01CF
+#define MTXORB_FTDI_RANGE_01D0_PID	0x01D0
+#define MTXORB_FTDI_RANGE_01D1_PID	0x01D1
+#define MTXORB_FTDI_RANGE_01D2_PID	0x01D2
+#define MTXORB_FTDI_RANGE_01D3_PID	0x01D3
+#define MTXORB_FTDI_RANGE_01D4_PID	0x01D4
+#define MTXORB_FTDI_RANGE_01D5_PID	0x01D5
+#define MTXORB_FTDI_RANGE_01D6_PID	0x01D6
+#define MTXORB_FTDI_RANGE_01D7_PID	0x01D7
+#define MTXORB_FTDI_RANGE_01D8_PID	0x01D8
+#define MTXORB_FTDI_RANGE_01D9_PID	0x01D9
+#define MTXORB_FTDI_RANGE_01DA_PID	0x01DA
+#define MTXORB_FTDI_RANGE_01DB_PID	0x01DB
+#define MTXORB_FTDI_RANGE_01DC_PID	0x01DC
+#define MTXORB_FTDI_RANGE_01DD_PID	0x01DD
+#define MTXORB_FTDI_RANGE_01DE_PID	0x01DE
+#define MTXORB_FTDI_RANGE_01DF_PID	0x01DF
+#define MTXORB_FTDI_RANGE_01E0_PID	0x01E0
+#define MTXORB_FTDI_RANGE_01E1_PID	0x01E1
+#define MTXORB_FTDI_RANGE_01E2_PID	0x01E2
+#define MTXORB_FTDI_RANGE_01E3_PID	0x01E3
+#define MTXORB_FTDI_RANGE_01E4_PID	0x01E4
+#define MTXORB_FTDI_RANGE_01E5_PID	0x01E5
+#define MTXORB_FTDI_RANGE_01E6_PID	0x01E6
+#define MTXORB_FTDI_RANGE_01E7_PID	0x01E7
+#define MTXORB_FTDI_RANGE_01E8_PID	0x01E8
+#define MTXORB_FTDI_RANGE_01E9_PID	0x01E9
+#define MTXORB_FTDI_RANGE_01EA_PID	0x01EA
+#define MTXORB_FTDI_RANGE_01EB_PID	0x01EB
+#define MTXORB_FTDI_RANGE_01EC_PID	0x01EC
+#define MTXORB_FTDI_RANGE_01ED_PID	0x01ED
+#define MTXORB_FTDI_RANGE_01EE_PID	0x01EE
+#define MTXORB_FTDI_RANGE_01EF_PID	0x01EF
+#define MTXORB_FTDI_RANGE_01F0_PID	0x01F0
+#define MTXORB_FTDI_RANGE_01F1_PID	0x01F1
+#define MTXORB_FTDI_RANGE_01F2_PID	0x01F2
+#define MTXORB_FTDI_RANGE_01F3_PID	0x01F3
+#define MTXORB_FTDI_RANGE_01F4_PID	0x01F4
+#define MTXORB_FTDI_RANGE_01F5_PID	0x01F5
+#define MTXORB_FTDI_RANGE_01F6_PID	0x01F6
+#define MTXORB_FTDI_RANGE_01F7_PID	0x01F7
+#define MTXORB_FTDI_RANGE_01F8_PID	0x01F8
+#define MTXORB_FTDI_RANGE_01F9_PID	0x01F9
+#define MTXORB_FTDI_RANGE_01FA_PID	0x01FA
+#define MTXORB_FTDI_RANGE_01FB_PID	0x01FB
+#define MTXORB_FTDI_RANGE_01FC_PID	0x01FC
+#define MTXORB_FTDI_RANGE_01FD_PID	0x01FD
+#define MTXORB_FTDI_RANGE_01FE_PID	0x01FE
+#define MTXORB_FTDI_RANGE_01FF_PID	0x01FF
+#define MTXORB_FTDI_RANGE_4701_PID	0x4701
+#define MTXORB_FTDI_RANGE_9300_PID	0x9300
+#define MTXORB_FTDI_RANGE_9301_PID	0x9301
+#define MTXORB_FTDI_RANGE_9302_PID	0x9302
+#define MTXORB_FTDI_RANGE_9303_PID	0x9303
+#define MTXORB_FTDI_RANGE_9304_PID	0x9304
+#define MTXORB_FTDI_RANGE_9305_PID	0x9305
+#define MTXORB_FTDI_RANGE_9306_PID	0x9306
+#define MTXORB_FTDI_RANGE_9307_PID	0x9307
+#define MTXORB_FTDI_RANGE_9308_PID	0x9308
+#define MTXORB_FTDI_RANGE_9309_PID	0x9309
+#define MTXORB_FTDI_RANGE_930A_PID	0x930A
+#define MTXORB_FTDI_RANGE_930B_PID	0x930B
+#define MTXORB_FTDI_RANGE_930C_PID	0x930C
+#define MTXORB_FTDI_RANGE_930D_PID	0x930D
+#define MTXORB_FTDI_RANGE_930E_PID	0x930E
+#define MTXORB_FTDI_RANGE_930F_PID	0x930F
+#define MTXORB_FTDI_RANGE_9310_PID	0x9310
+#define MTXORB_FTDI_RANGE_9311_PID	0x9311
+#define MTXORB_FTDI_RANGE_9312_PID	0x9312
+#define MTXORB_FTDI_RANGE_9313_PID	0x9313
+#define MTXORB_FTDI_RANGE_9314_PID	0x9314
+#define MTXORB_FTDI_RANGE_9315_PID	0x9315
+#define MTXORB_FTDI_RANGE_9316_PID	0x9316
+#define MTXORB_FTDI_RANGE_9317_PID	0x9317
+#define MTXORB_FTDI_RANGE_9318_PID	0x9318
+#define MTXORB_FTDI_RANGE_9319_PID	0x9319
+#define MTXORB_FTDI_RANGE_931A_PID	0x931A
+#define MTXORB_FTDI_RANGE_931B_PID	0x931B
+#define MTXORB_FTDI_RANGE_931C_PID	0x931C
+#define MTXORB_FTDI_RANGE_931D_PID	0x931D
+#define MTXORB_FTDI_RANGE_931E_PID	0x931E
+#define MTXORB_FTDI_RANGE_931F_PID	0x931F
+
+/*
+ * The Mobility Lab (TML)
+ * Submitted by Pierre Castella
+ */
+#define TML_VID			0x1B91	/* Vendor ID */
+#define TML_USB_SERIAL_PID	0x0064	/* USB - Serial Converter */
+
+/* Alti-2 products  http://www.alti-2.com */
+#define ALTI2_VID	0x1BC9
+#define ALTI2_N3_PID	0x6001	/* Neptune 3 */
+
+/*
+ * Ionics PlugComputer
+ */
+#define IONICS_VID			0x1c0c
+#define IONICS_PLUGCOMPUTER_PID		0x0102
+
+/*
+ * EZPrototypes (PID reseller)
+ */
+#define EZPROTOTYPES_VID		0x1c40
+#define HJELMSLUND_USB485_ISO_PID	0x0477
+
+/*
+ * Dresden Elektronik Sensor Terminal Board
+ */
+#define DE_VID			0x1cf1 /* Vendor ID */
+#define STB_PID			0x0001 /* Sensor Terminal Board */
+#define WHT_PID			0x0004 /* Wireless Handheld Terminal */
+
+/*
+ * STMicroelectonics
+ */
+#define ST_VID			0x0483
+#define ST_STMCLT_2232_PID	0x3746
+#define ST_STMCLT_4232_PID	0x3747
+
+/*
+ * Papouch products (http://www.papouch.com/)
+ * Submitted by Folkert van Heusden
+ */
+
+#define PAPOUCH_VID			0x5050	/* Vendor ID */
+#define PAPOUCH_SB485_PID		0x0100	/* Papouch SB485 USB-485/422 Converter */
+#define PAPOUCH_AP485_PID		0x0101	/* AP485 USB-RS485 Converter */
+#define PAPOUCH_SB422_PID		0x0102	/* Papouch SB422 USB-RS422 Converter  */
+#define PAPOUCH_SB485_2_PID		0x0103	/* Papouch SB485 USB-485/422 Converter */
+#define PAPOUCH_AP485_2_PID		0x0104	/* AP485 USB-RS485 Converter */
+#define PAPOUCH_SB422_2_PID		0x0105	/* Papouch SB422 USB-RS422 Converter  */
+#define PAPOUCH_SB485S_PID		0x0106	/* Papouch SB485S USB-485/422 Converter */
+#define PAPOUCH_SB485C_PID		0x0107	/* Papouch SB485C USB-485/422 Converter */
+#define PAPOUCH_LEC_PID			0x0300	/* LEC USB Converter */
+#define PAPOUCH_SB232_PID		0x0301	/* Papouch SB232 USB-RS232 Converter */
+#define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
+#define PAPOUCH_IRAMP_PID		0x0500	/* Papouch IRAmp Duplex */
+#define PAPOUCH_DRAK5_PID		0x0700	/* Papouch DRAK5 */
+#define PAPOUCH_QUIDO8x8_PID		0x0800	/* Papouch Quido 8/8 Module */
+#define PAPOUCH_QUIDO4x4_PID		0x0900	/* Papouch Quido 4/4 Module */
+#define PAPOUCH_QUIDO2x2_PID		0x0a00	/* Papouch Quido 2/2 Module */
+#define PAPOUCH_QUIDO10x1_PID		0x0b00	/* Papouch Quido 10/1 Module */
+#define PAPOUCH_QUIDO30x3_PID		0x0c00	/* Papouch Quido 30/3 Module */
+#define PAPOUCH_QUIDO60x3_PID		0x0d00	/* Papouch Quido 60(100)/3 Module */
+#define PAPOUCH_QUIDO2x16_PID		0x0e00	/* Papouch Quido 2/16 Module */
+#define PAPOUCH_QUIDO3x32_PID		0x0f00	/* Papouch Quido 3/32 Module */
+#define PAPOUCH_DRAK6_PID		0x1000	/* Papouch DRAK6 */
+#define PAPOUCH_UPSUSB_PID		0x8000	/* Papouch UPS-USB adapter */
+#define PAPOUCH_MU_PID			0x8001	/* MU controller */
+#define PAPOUCH_SIMUKEY_PID		0x8002	/* Papouch SimuKey */
+#define PAPOUCH_AD4USB_PID		0x8003	/* AD4USB Measurement Module */
+#define PAPOUCH_GMUX_PID		0x8004	/* Papouch GOLIATH MUX */
+#define PAPOUCH_GMSR_PID		0x8005	/* Papouch GOLIATH MSR */
+
+/*
+ * Marvell SheevaPlug
+ */
+#define MARVELL_VID		0x9e88
+#define MARVELL_SHEEVAPLUG_PID	0x9e8f
+
+/*
+ * Evolution Robotics products (http://www.evolution.com/).
+ * Submitted by Shawn M. Lavelle.
+ */
+#define EVOLUTION_VID		0xDEEE	/* Vendor ID */
+#define EVOLUTION_ER1_PID	0x0300	/* ER1 Control Module */
+#define EVO_8U232AM_PID		0x02FF	/* Evolution robotics RCM2 (FT232AM)*/
+#define EVO_HYBRID_PID		0x0302	/* Evolution robotics RCM4 PID (FT232BM)*/
+#define EVO_RCM4_PID		0x0303	/* Evolution robotics RCM4 PID */
+
+/*
+ * MJS Gadgets HD Radio / XM Radio / Sirius Radio interfaces (using VID 0x0403)
+ */
+#define MJSG_GENERIC_PID	0x9378
+#define MJSG_SR_RADIO_PID	0x9379
+#define MJSG_XM_RADIO_PID	0x937A
+#define MJSG_HD_RADIO_PID	0x937C
+
+/*
+ * D.O.Tec products (http://www.directout.eu)
+ */
+#define FTDI_DOTEC_PID 0x9868
+
+/*
+ * Xverve Signalyzer tools (http://www.signalyzer.com/)
+ */
+#define XVERVE_SIGNALYZER_ST_PID	0xBCA0
+#define XVERVE_SIGNALYZER_SLITE_PID	0xBCA1
+#define XVERVE_SIGNALYZER_SH2_PID	0xBCA2
+#define XVERVE_SIGNALYZER_SH4_PID	0xBCA4
+
+/*
+ * Segway Robotic Mobility Platform USB interface (using VID 0x0403)
+ * Submitted by John G. Rogers
+ */
+#define SEGWAY_RMP200_PID	0xe729
+
+
+/*
+ * Accesio USB Data Acquisition products (http://www.accesio.com/)
+ */
+#define ACCESIO_COM4SM_PID 	0xD578
+
+/* www.sciencescope.co.uk educational dataloggers */
+#define FTDI_SCIENCESCOPE_LOGBOOKML_PID		0xFF18
+#define FTDI_SCIENCESCOPE_LS_LOGBOOK_PID	0xFF1C
+#define FTDI_SCIENCESCOPE_HS_LOGBOOK_PID	0xFF1D
+
+/*
+ * Milkymist One JTAG/Serial
+ */
+#define QIHARDWARE_VID			0x20B7
+#define MILKYMISTONE_JTAGSERIAL_PID	0x0713
+
+/*
+ * CTI GmbH RS485 Converter http://www.cti-lean.com/
+ */
+/* USB-485-Mini*/
+#define FTDI_CTI_MINI_PID	0xF608
+/* USB-Nano-485*/
+#define FTDI_CTI_NANO_PID	0xF60B
+
+/*
+ * ZeitControl cardsystems GmbH rfid-readers http://zeitcontrol.de
+ */
+/* TagTracer MIFARE*/
+#define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID	0xF7C0
+
+/*
+ * Rainforest Automation
+ */
+/* ZigBee controller */
+#define FTDI_RF_R106		0x8A28
+
+/*
+ * Product: HCP HIT GPRS modem
+ * Manufacturer: HCP d.o.o.
+ * ATI command output: Cinterion MC55i
+ */
+#define FTDI_CINTERION_MC55I_PID	0xA951
+
+/*
+ * Product: FirmwareHubEmulator
+ * Manufacturer: Harman Becker Automotive Systems
+ */
+#define FTDI_FHE_PID		0xA9A0
+
+/*
+ * Product: Comet Caller ID decoder
+ * Manufacturer: Crucible Technologies
+ */
+#define FTDI_CT_COMET_PID	0x8e08
+
+/*
+ * Product: Z3X Box
+ * Manufacturer: Smart GSM Team
+ */
+#define FTDI_Z3X_PID		0x0011
+
+/*
+ * Product: Cressi PC Interface
+ * Manufacturer: Cressi
+ */
+#define FTDI_CRESSI_PID		0x87d0
+
+/*
+ * Brainboxes devices
+ */
+#define BRAINBOXES_VID			0x05d1
+#define BRAINBOXES_VX_001_PID		0x1001 /* VX-001 ExpressCard 1 Port RS232 */
+#define BRAINBOXES_VX_012_PID		0x1002 /* VX-012 ExpressCard 2 Port RS232 */
+#define BRAINBOXES_VX_023_PID		0x1003 /* VX-023 ExpressCard 1 Port RS422/485 */
+#define BRAINBOXES_VX_034_PID		0x1004 /* VX-034 ExpressCard 2 Port RS422/485 */
+#define BRAINBOXES_US_101_PID		0x1011 /* US-101 1xRS232 */
+#define BRAINBOXES_US_159_PID		0x1021 /* US-159 1xRS232 */
+#define BRAINBOXES_US_235_PID		0x1017 /* US-235 1xRS232 */
+#define BRAINBOXES_US_320_PID		0x1019 /* US-320 1xRS422/485 */
+#define BRAINBOXES_US_324_PID		0x1013 /* US-324 1xRS422/485 1Mbaud */
+#define BRAINBOXES_US_606_1_PID		0x2001 /* US-606 6 Port RS232 Serial Port 1 and 2 */
+#define BRAINBOXES_US_606_2_PID		0x2002 /* US-606 6 Port RS232 Serial Port 3 and 4 */
+#define BRAINBOXES_US_606_3_PID		0x2003 /* US-606 6 Port RS232 Serial Port 4 and 6 */
+#define BRAINBOXES_US_701_1_PID		0x2011 /* US-701 4xRS232 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_701_2_PID		0x2012 /* US-701 4xRS422 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_279_1_PID		0x2021 /* US-279 8xRS422 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_279_2_PID		0x2022 /* US-279 8xRS422 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_279_3_PID		0x2023 /* US-279 8xRS422 1Mbaud Port 5 and 6 */
+#define BRAINBOXES_US_279_4_PID		0x2024 /* US-279 8xRS422 1Mbaud Port 7 and 8 */
+#define BRAINBOXES_US_346_1_PID		0x3011 /* US-346 4xRS422/485 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_346_2_PID		0x3012 /* US-346 4xRS422/485 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_257_PID		0x5001 /* US-257 2xRS232 1Mbaud */
+#define BRAINBOXES_US_313_PID		0x6001 /* US-313 2xRS422/485 1Mbaud */
+#define BRAINBOXES_US_357_PID		0x7001 /* US_357 1xRS232/422/485 */
+#define BRAINBOXES_US_842_1_PID		0x8001 /* US-842 8xRS422/485 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_842_2_PID		0x8002 /* US-842 8xRS422/485 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_842_3_PID		0x8003 /* US-842 8xRS422/485 1Mbaud Port 5 and 6 */
+#define BRAINBOXES_US_842_4_PID		0x8004 /* US-842 8xRS422/485 1Mbaud Port 7 and 8 */
+#define BRAINBOXES_US_160_1_PID		0x9001 /* US-160 16xRS232 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_160_2_PID		0x9002 /* US-160 16xRS232 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_160_3_PID		0x9003 /* US-160 16xRS232 1Mbaud Port 5 and 6 */
+#define BRAINBOXES_US_160_4_PID		0x9004 /* US-160 16xRS232 1Mbaud Port 7 and 8 */
+#define BRAINBOXES_US_160_5_PID		0x9005 /* US-160 16xRS232 1Mbaud Port 9 and 10 */
+#define BRAINBOXES_US_160_6_PID		0x9006 /* US-160 16xRS232 1Mbaud Port 11 and 12 */
+#define BRAINBOXES_US_160_7_PID		0x9007 /* US-160 16xRS232 1Mbaud Port 13 and 14 */
+#define BRAINBOXES_US_160_8_PID		0x9008 /* US-160 16xRS232 1Mbaud Port 15 and 16 */
+
+/*
+ * ekey biometric systems GmbH (http://ekey.net/)
+ */
+#define FTDI_EKEY_CONV_USB_PID		0xCB08	/* Converter USB */
+
+/*
+ * GE Healthcare devices
+ */
+#define GE_HEALTHCARE_VID		0x1901
+#define GE_HEALTHCARE_NEMO_TRACKER_PID	0x0015
+
+/*
+ * Active Research (Actisense) devices
+ */
+#define ACTISENSE_NDC_PID		0xD9A8 /* NDC USB Serial Adapter */
+#define ACTISENSE_USG_PID		0xD9A9 /* USG USB Serial Adapter */
+#define ACTISENSE_NGT_PID		0xD9AA /* NGT NMEA2000 Interface */
+#define ACTISENSE_NGW_PID		0xD9AB /* NGW NMEA2000 Gateway */
+#define ACTISENSE_UID_PID		0xD9AC /* USB Isolating Device */
+#define ACTISENSE_USA_PID		0xD9AD /* USB to Serial Adapter */
+#define ACTISENSE_NGX_PID		0xD9AE /* NGX NMEA2000 Gateway */
+#define ACTISENSE_D9AF_PID		0xD9AF /* Actisense Reserved */
+#define CHETCO_SEAGAUGE_PID		0xA548 /* SeaGauge USB Adapter */
+#define CHETCO_SEASWITCH_PID		0xA549 /* SeaSwitch USB Adapter */
+#define CHETCO_SEASMART_NMEA2000_PID	0xA54A /* SeaSmart NMEA2000 Gateway */
+#define CHETCO_SEASMART_ETHERNET_PID	0xA54B /* SeaSmart Ethernet Gateway */
+#define CHETCO_SEASMART_WIFI_PID	0xA5AC /* SeaSmart Wifi Gateway */
+#define CHETCO_SEASMART_DISPLAY_PID	0xA5AD /* SeaSmart NMEA2000 Display */
+#define CHETCO_SEASMART_LITE_PID	0xA5AE /* SeaSmart Lite USB Adapter */
+#define CHETCO_SEASMART_ANALOG_PID	0xA5AF /* SeaSmart Analog Adapter */
+
+/*
+ * Belimo Automation
+ */
+#define BELIMO_ZTH_PID			0x8050
+#define BELIMO_ZIP_PID			0xC811
+
+/*
+ * Unjo AB
+ */
+#define UNJO_VID			0x22B7
+#define UNJO_ISODEBUG_V1_PID		0x150D
+
+/*
+ * IDS GmbH
+ */
+#define IDS_VID				0x2CAF
+#define IDS_SI31A_PID			0x13A2
+#define IDS_CM31A_PID			0x13A3
+
+/*
+ * U-Blox products (http://www.u-blox.com).
+ */
+#define UBLOX_VID			0x1546
+#define UBLOX_C099F9P_ZED_PID		0x0502
+#define UBLOX_C099F9P_ODIN_PID		0x0503
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
new file mode 100644
index 000000000..f1a8d8343
--- /dev/null
+++ b/drivers/usb/serial/garmin_gps.c
@@ -0,0 +1,1446 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Garmin GPS driver
+ *
+ * Copyright (C) 2006-2011 Hermann Kneissel herkne@gmx.de
+ *
+ * The latest version of the driver can be found at
+ * http://sourceforge.net/projects/garmin-gps/
+ *
+ * This driver has been derived from v2.1 of the visor driver.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/atomic.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+/* the mode to be set when the port ist opened */
+static int initial_mode = 1;
+
+#define GARMIN_VENDOR_ID             0x091E
+
+/*
+ * Version Information
+ */
+
+#define VERSION_MAJOR	0
+#define VERSION_MINOR	36
+
+#define _STR(s) #s
+#define _DRIVER_VERSION(a, b) "v" _STR(a) "." _STR(b)
+#define DRIVER_VERSION _DRIVER_VERSION(VERSION_MAJOR, VERSION_MINOR)
+#define DRIVER_AUTHOR "hermann kneissel"
+#define DRIVER_DESC "garmin gps driver"
+
+/* error codes returned by the driver */
+#define EINVPKT	1000	/* invalid packet structure */
+
+
+/* size of the header of a packet using the usb protocol */
+#define GARMIN_PKTHDR_LENGTH	12
+
+/* max. possible size of a packet using the serial protocol */
+#define MAX_SERIAL_PKT_SIZ (3 + 255 + 3)
+
+/*  max. possible size of a packet with worst case stuffing */
+#define MAX_SERIAL_PKT_SIZ_STUFFED (MAX_SERIAL_PKT_SIZ + 256)
+
+/* size of a buffer able to hold a complete (no stuffing) packet
+ * (the document protocol does not contain packets with a larger
+ *  size, but in theory a packet may be 64k+12 bytes - if in
+ *  later protocol versions larger packet sizes occur, this value
+ *  should be increased accordingly, so the input buffer is always
+ *  large enough the store a complete packet inclusive header) */
+#define GPS_IN_BUFSIZ  (GARMIN_PKTHDR_LENGTH+MAX_SERIAL_PKT_SIZ)
+
+/* size of a buffer able to hold a complete (incl. stuffing) packet */
+#define GPS_OUT_BUFSIZ (GARMIN_PKTHDR_LENGTH+MAX_SERIAL_PKT_SIZ_STUFFED)
+
+/* where to place the packet id of a serial packet, so we can
+ * prepend the usb-packet header without the need to move the
+ * packets data */
+#define GSP_INITIAL_OFFSET (GARMIN_PKTHDR_LENGTH-2)
+
+/* max. size of incoming private packets (header+1 param) */
+#define PRIVPKTSIZ (GARMIN_PKTHDR_LENGTH+4)
+
+#define GARMIN_LAYERID_TRANSPORT  0
+#define GARMIN_LAYERID_APPL      20
+/* our own layer-id to use for some control mechanisms */
+#define GARMIN_LAYERID_PRIVATE	0x01106E4B
+
+#define GARMIN_PKTID_PVT_DATA	51
+#define GARMIN_PKTID_L001_COMMAND_DATA 10
+
+#define CMND_ABORT_TRANSFER 0
+
+/* packet ids used in private layer */
+#define PRIV_PKTID_SET_DEBUG	1
+#define PRIV_PKTID_SET_MODE	2
+#define PRIV_PKTID_INFO_REQ	3
+#define PRIV_PKTID_INFO_RESP	4
+#define PRIV_PKTID_RESET_REQ	5
+#define PRIV_PKTID_SET_DEF_MODE	6
+
+
+#define ETX	0x03
+#define DLE	0x10
+#define ACK	0x06
+#define NAK	0x15
+
+/* structure used to queue incoming packets */
+struct garmin_packet {
+	struct list_head  list;
+	int               seq;
+	/* the real size of the data array, always > 0 */
+	int               size;
+	__u8              data[];
+};
+
+/* structure used to keep the current state of the driver */
+struct garmin_data {
+	__u8   state;
+	__u16  flags;
+	__u8   mode;
+	__u8   count;
+	__u8   pkt_id;
+	__u32  serial_num;
+	struct timer_list timer;
+	struct usb_serial_port *port;
+	int    seq_counter;
+	int    insize;
+	int    outsize;
+	__u8   inbuffer [GPS_IN_BUFSIZ];  /* tty -> usb */
+	__u8   outbuffer[GPS_OUT_BUFSIZ]; /* usb -> tty */
+	__u8   privpkt[4*6];
+	spinlock_t lock;
+	struct list_head pktlist;
+	struct usb_anchor write_urbs;
+};
+
+
+#define STATE_NEW            0
+#define STATE_INITIAL_DELAY  1
+#define STATE_TIMEOUT        2
+#define STATE_SESSION_REQ1   3
+#define STATE_SESSION_REQ2   4
+#define STATE_ACTIVE         5
+
+#define STATE_RESET	     8
+#define STATE_DISCONNECTED   9
+#define STATE_WAIT_TTY_ACK  10
+#define STATE_GSP_WAIT_DATA 11
+
+#define MODE_NATIVE          0
+#define MODE_GARMIN_SERIAL   1
+
+/* Flags used in garmin_data.flags: */
+#define FLAGS_SESSION_REPLY_MASK  0x00C0
+#define FLAGS_SESSION_REPLY1_SEEN 0x0080
+#define FLAGS_SESSION_REPLY2_SEEN 0x0040
+#define FLAGS_BULK_IN_ACTIVE      0x0020
+#define FLAGS_BULK_IN_RESTART     0x0010
+#define FLAGS_THROTTLED           0x0008
+#define APP_REQ_SEEN              0x0004
+#define APP_RESP_SEEN             0x0002
+#define CLEAR_HALT_REQUIRED       0x0001
+
+#define FLAGS_QUEUING             0x0100
+#define FLAGS_DROP_DATA           0x0800
+
+#define FLAGS_GSP_SKIP            0x1000
+#define FLAGS_GSP_DLESEEN         0x2000
+
+
+
+
+
+
+/* function prototypes */
+static int gsp_next_packet(struct garmin_data *garmin_data_p);
+static int garmin_write_bulk(struct usb_serial_port *port,
+			     const unsigned char *buf, int count,
+			     int dismiss_ack);
+
+/* some special packets to be send or received */
+static unsigned char const GARMIN_START_SESSION_REQ[]
+	= { 0, 0, 0, 0,  5, 0, 0, 0, 0, 0, 0, 0 };
+static unsigned char const GARMIN_START_SESSION_REPLY[]
+	= { 0, 0, 0, 0,  6, 0, 0, 0, 4, 0, 0, 0 };
+static unsigned char const GARMIN_BULK_IN_AVAIL_REPLY[]
+	= { 0, 0, 0, 0,  2, 0, 0, 0, 0, 0, 0, 0 };
+static unsigned char const GARMIN_STOP_TRANSFER_REQ[]
+	= { 20, 0, 0, 0,  10, 0, 0, 0, 2, 0, 0, 0, 0, 0 };
+static unsigned char const GARMIN_STOP_TRANSFER_REQ_V2[]
+	= { 20, 0, 0, 0,  10, 0, 0, 0, 1, 0, 0, 0, 0 };
+
+/* packets currently unused, left as documentation */
+#if 0
+static unsigned char const GARMIN_APP_LAYER_REPLY[]
+	= { 0x14, 0, 0, 0 };
+static unsigned char const GARMIN_START_PVT_REQ[]
+	= { 20, 0, 0, 0,  10, 0, 0, 0, 2, 0, 0, 0, 49, 0 };
+static unsigned char const GARMIN_STOP_PVT_REQ[]
+	= { 20, 0, 0, 0,  10, 0, 0, 0, 2, 0, 0, 0, 50, 0 };
+static unsigned char const PRIVATE_REQ[]
+	=    { 0x4B, 0x6E, 0x10, 0x01,  0xFF, 0, 0, 0, 0xFF, 0, 0, 0 };
+#endif
+
+
+static const struct usb_device_id id_table[] = {
+	/* the same device id seems to be used by all
+	   usb enabled GPS devices */
+	{ USB_DEVICE(GARMIN_VENDOR_ID, 3) },
+	{ }					/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+
+static inline int getLayerId(const __u8 *usbPacket)
+{
+	return __le32_to_cpup((__le32 *)(usbPacket));
+}
+
+static inline int getPacketId(const __u8 *usbPacket)
+{
+	return __le32_to_cpup((__le32 *)(usbPacket+4));
+}
+
+static inline int getDataLength(const __u8 *usbPacket)
+{
+	return __le32_to_cpup((__le32 *)(usbPacket+8));
+}
+
+
+/*
+ * check if the usb-packet in buf contains an abort-transfer command.
+ * (if yes, all queued data will be dropped)
+ */
+static inline int isAbortTrfCmnd(const unsigned char *buf)
+{
+	if (memcmp(buf, GARMIN_STOP_TRANSFER_REQ,
+			sizeof(GARMIN_STOP_TRANSFER_REQ)) == 0 ||
+	    memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2,
+			sizeof(GARMIN_STOP_TRANSFER_REQ_V2)) == 0)
+		return 1;
+	else
+		return 0;
+}
+
+
+
+static void send_to_tty(struct usb_serial_port *port,
+			char *data, unsigned int actual_length)
+{
+	if (actual_length) {
+		usb_serial_debug_data(&port->dev, __func__, actual_length, data);
+		tty_insert_flip_string(&port->port, data, actual_length);
+		tty_flip_buffer_push(&port->port);
+	}
+}
+
+
+/******************************************************************************
+ * packet queue handling
+ ******************************************************************************/
+
+/*
+ * queue a received (usb-)packet for later processing
+ */
+static int pkt_add(struct garmin_data *garmin_data_p,
+		   unsigned char *data, unsigned int data_length)
+{
+	int state = 0;
+	int result = 0;
+	unsigned long flags;
+	struct garmin_packet *pkt;
+
+	/* process only packets containing data ... */
+	if (data_length) {
+		pkt = kmalloc(sizeof(struct garmin_packet)+data_length,
+								GFP_ATOMIC);
+		if (!pkt)
+			return 0;
+
+		pkt->size = data_length;
+		memcpy(pkt->data, data, data_length);
+
+		spin_lock_irqsave(&garmin_data_p->lock, flags);
+		garmin_data_p->flags |= FLAGS_QUEUING;
+		result = list_empty(&garmin_data_p->pktlist);
+		pkt->seq = garmin_data_p->seq_counter++;
+		list_add_tail(&pkt->list, &garmin_data_p->pktlist);
+		state = garmin_data_p->state;
+		spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
+		dev_dbg(&garmin_data_p->port->dev,
+			"%s - added: pkt: %d - %d bytes\n", __func__,
+			pkt->seq, data_length);
+
+		/* in serial mode, if someone is waiting for data from
+		   the device, convert and send the next packet to tty. */
+		if (result && (state == STATE_GSP_WAIT_DATA))
+			gsp_next_packet(garmin_data_p);
+	}
+	return result;
+}
+
+
+/* get the next pending packet */
+static struct garmin_packet *pkt_pop(struct garmin_data *garmin_data_p)
+{
+	unsigned long flags;
+	struct garmin_packet *result = NULL;
+
+	spin_lock_irqsave(&garmin_data_p->lock, flags);
+	if (!list_empty(&garmin_data_p->pktlist)) {
+		result = (struct garmin_packet *)garmin_data_p->pktlist.next;
+		list_del(&result->list);
+	}
+	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+	return result;
+}
+
+
+/* free up all queued data */
+static void pkt_clear(struct garmin_data *garmin_data_p)
+{
+	unsigned long flags;
+	struct garmin_packet *result = NULL;
+
+	spin_lock_irqsave(&garmin_data_p->lock, flags);
+	while (!list_empty(&garmin_data_p->pktlist)) {
+		result = (struct garmin_packet *)garmin_data_p->pktlist.next;
+		list_del(&result->list);
+		kfree(result);
+	}
+	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+}
+
+
+/******************************************************************************
+ * garmin serial protocol handling handling
+ ******************************************************************************/
+
+/* send an ack packet back to the tty */
+static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id)
+{
+	__u8 pkt[10];
+	__u8 cksum = 0;
+	__u8 *ptr = pkt;
+	unsigned  l = 0;
+
+	dev_dbg(&garmin_data_p->port->dev, "%s - pkt-id: 0x%X.\n", __func__,
+			pkt_id);
+
+	*ptr++ = DLE;
+	*ptr++ = ACK;
+	cksum += ACK;
+
+	*ptr++ = 2;
+	cksum += 2;
+
+	*ptr++ = pkt_id;
+	cksum += pkt_id;
+
+	if (pkt_id == DLE)
+		*ptr++ = DLE;
+
+	*ptr++ = 0;
+	*ptr++ = (-cksum) & 0xFF;
+	*ptr++ = DLE;
+	*ptr++ = ETX;
+
+	l = ptr-pkt;
+
+	send_to_tty(garmin_data_p->port, pkt, l);
+	return 0;
+}
+
+
+
+/*
+ * called for a complete packet received from tty layer
+ *
+ * the complete packet (pktid ... cksum) is in garmin_data_p->inbuf starting
+ * at GSP_INITIAL_OFFSET.
+ *
+ * count - number of bytes in the input buffer including space reserved for
+ *         the usb header: GSP_INITIAL_OFFSET + number of bytes in packet
+ *         (including pkt-id, data-length a. cksum)
+ */
+static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count)
+{
+	struct device *dev = &garmin_data_p->port->dev;
+	unsigned long flags;
+	const __u8 *recpkt = garmin_data_p->inbuffer+GSP_INITIAL_OFFSET;
+	__le32 *usbdata = (__le32 *) garmin_data_p->inbuffer;
+	int cksum = 0;
+	int n = 0;
+	int pktid = recpkt[0];
+	int size = recpkt[1];
+
+	usb_serial_debug_data(&garmin_data_p->port->dev, __func__,
+			      count-GSP_INITIAL_OFFSET, recpkt);
+
+	if (size != (count-GSP_INITIAL_OFFSET-3)) {
+		dev_dbg(dev, "%s - invalid size, expected %d bytes, got %d\n",
+			__func__, size, (count-GSP_INITIAL_OFFSET-3));
+		return -EINVPKT;
+	}
+
+	cksum += *recpkt++;
+	cksum += *recpkt++;
+
+	/* sanity check, remove after test ... */
+	if ((__u8 *)&(usbdata[3]) != recpkt) {
+		dev_dbg(dev, "%s - ptr mismatch %p - %p\n", __func__,
+			&(usbdata[4]), recpkt);
+		return -EINVPKT;
+	}
+
+	while (n < size) {
+		cksum += *recpkt++;
+		n++;
+	}
+
+	if (((cksum + *recpkt) & 0xff) != 0) {
+		dev_dbg(dev, "%s - invalid checksum, expected %02x, got %02x\n",
+			__func__, -cksum & 0xff, *recpkt);
+		return -EINVPKT;
+	}
+
+	usbdata[0] = __cpu_to_le32(GARMIN_LAYERID_APPL);
+	usbdata[1] = __cpu_to_le32(pktid);
+	usbdata[2] = __cpu_to_le32(size);
+
+	garmin_write_bulk(garmin_data_p->port, garmin_data_p->inbuffer,
+			   GARMIN_PKTHDR_LENGTH+size, 0);
+
+	/* if this was an abort-transfer command, flush all
+	   queued data. */
+	if (isAbortTrfCmnd(garmin_data_p->inbuffer)) {
+		spin_lock_irqsave(&garmin_data_p->lock, flags);
+		garmin_data_p->flags |= FLAGS_DROP_DATA;
+		spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+		pkt_clear(garmin_data_p);
+	}
+
+	return count;
+}
+
+
+
+/*
+ * Called for data received from tty
+ *
+ * buf contains the data read, it may span more than one packet or even
+ * incomplete packets
+ *
+ * input record should be a serial-record, but it may not be complete.
+ * Copy it into our local buffer, until an etx is seen (or an error
+ * occurs).
+ * Once the record is complete, convert into a usb packet and send it
+ * to the bulk pipe, send an ack back to the tty.
+ *
+ * If the input is an ack, just send the last queued packet to the
+ * tty layer.
+ *
+ * if the input is an abort command, drop all queued data.
+ */
+
+static int gsp_receive(struct garmin_data *garmin_data_p,
+		       const unsigned char *buf, int count)
+{
+	struct device *dev = &garmin_data_p->port->dev;
+	unsigned long flags;
+	int offs = 0;
+	int ack_or_nak_seen = 0;
+	__u8 *dest;
+	int size;
+	/* dleSeen: set if last byte read was a DLE */
+	int dleSeen;
+	/* skip: if set, skip incoming data until possible start of
+	 *       new packet
+	 */
+	int skip;
+	__u8 data;
+
+	spin_lock_irqsave(&garmin_data_p->lock, flags);
+	dest = garmin_data_p->inbuffer;
+	size = garmin_data_p->insize;
+	dleSeen = garmin_data_p->flags & FLAGS_GSP_DLESEEN;
+	skip = garmin_data_p->flags & FLAGS_GSP_SKIP;
+	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
+	/* dev_dbg(dev, "%s - dle=%d skip=%d size=%d count=%d\n",
+		__func__, dleSeen, skip, size, count); */
+
+	if (size == 0)
+		size = GSP_INITIAL_OFFSET;
+
+	while (offs < count) {
+
+		data = *(buf+offs);
+		offs++;
+
+		if (data == DLE) {
+			if (skip) { /* start of a new pkt */
+				skip = 0;
+				size = GSP_INITIAL_OFFSET;
+				dleSeen = 1;
+			} else if (dleSeen) {
+				dest[size++] = data;
+				dleSeen = 0;
+			} else {
+				dleSeen = 1;
+			}
+		} else if (data == ETX) {
+			if (dleSeen) {
+				/* packet complete */
+
+				data = dest[GSP_INITIAL_OFFSET];
+
+				if (data == ACK) {
+					ack_or_nak_seen = ACK;
+					dev_dbg(dev, "ACK packet complete.\n");
+				} else if (data == NAK) {
+					ack_or_nak_seen = NAK;
+					dev_dbg(dev, "NAK packet complete.\n");
+				} else {
+					dev_dbg(dev, "packet complete - id=0x%X.\n",
+							data);
+					gsp_rec_packet(garmin_data_p, size);
+				}
+
+				skip = 1;
+				size = GSP_INITIAL_OFFSET;
+				dleSeen = 0;
+			} else {
+				dest[size++] = data;
+			}
+		} else if (!skip) {
+
+			if (dleSeen) {
+				size = GSP_INITIAL_OFFSET;
+				dleSeen = 0;
+			}
+
+			dest[size++] = data;
+		}
+
+		if (size >= GPS_IN_BUFSIZ) {
+			dev_dbg(dev, "%s - packet too large.\n", __func__);
+			skip = 1;
+			size = GSP_INITIAL_OFFSET;
+			dleSeen = 0;
+		}
+	}
+
+	spin_lock_irqsave(&garmin_data_p->lock, flags);
+
+	garmin_data_p->insize = size;
+
+	/* copy flags back to structure */
+	if (skip)
+		garmin_data_p->flags |= FLAGS_GSP_SKIP;
+	else
+		garmin_data_p->flags &= ~FLAGS_GSP_SKIP;
+
+	if (dleSeen)
+		garmin_data_p->flags |= FLAGS_GSP_DLESEEN;
+	else
+		garmin_data_p->flags &= ~FLAGS_GSP_DLESEEN;
+
+	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
+	if (ack_or_nak_seen) {
+		if (gsp_next_packet(garmin_data_p) > 0)
+			garmin_data_p->state = STATE_ACTIVE;
+		else
+			garmin_data_p->state = STATE_GSP_WAIT_DATA;
+	}
+	return count;
+}
+
+
+
+/*
+ * Sends a usb packet to the tty
+ *
+ * Assumes, that all packages and at an usb-packet boundary.
+ *
+ * return <0 on error, 0 if packet is incomplete or > 0 if packet was sent
+ */
+static int gsp_send(struct garmin_data *garmin_data_p,
+		    const unsigned char *buf, int count)
+{
+	struct device *dev = &garmin_data_p->port->dev;
+	const unsigned char *src;
+	unsigned char *dst;
+	int pktid = 0;
+	int datalen = 0;
+	int cksum = 0;
+	int i = 0;
+	int k;
+
+	dev_dbg(dev, "%s - state %d - %d bytes.\n", __func__,
+		garmin_data_p->state, count);
+
+	k = garmin_data_p->outsize;
+	if ((k+count) > GPS_OUT_BUFSIZ) {
+		dev_dbg(dev, "packet too large\n");
+		garmin_data_p->outsize = 0;
+		return -4;
+	}
+
+	memcpy(garmin_data_p->outbuffer+k, buf, count);
+	k += count;
+	garmin_data_p->outsize = k;
+
+	if (k >= GARMIN_PKTHDR_LENGTH) {
+		pktid  = getPacketId(garmin_data_p->outbuffer);
+		datalen = getDataLength(garmin_data_p->outbuffer);
+		i = GARMIN_PKTHDR_LENGTH + datalen;
+		if (k < i)
+			return 0;
+	} else {
+		return 0;
+	}
+
+	dev_dbg(dev, "%s - %d bytes in buffer, %d bytes in pkt.\n", __func__, k, i);
+
+	/* garmin_data_p->outbuffer now contains a complete packet */
+
+	usb_serial_debug_data(&garmin_data_p->port->dev, __func__, k,
+			      garmin_data_p->outbuffer);
+
+	garmin_data_p->outsize = 0;
+
+	if (getLayerId(garmin_data_p->outbuffer) != GARMIN_LAYERID_APPL) {
+		dev_dbg(dev, "not an application packet (%d)\n",
+				getLayerId(garmin_data_p->outbuffer));
+		return -1;
+	}
+
+	if (pktid > 255) {
+		dev_dbg(dev, "packet-id %d too large\n", pktid);
+		return -2;
+	}
+
+	if (datalen > 255) {
+		dev_dbg(dev, "packet-size %d too large\n", datalen);
+		return -3;
+	}
+
+	/* the serial protocol should be able to handle this packet */
+
+	k = 0;
+	src = garmin_data_p->outbuffer+GARMIN_PKTHDR_LENGTH;
+	for (i = 0; i < datalen; i++) {
+		if (*src++ == DLE)
+			k++;
+	}
+
+	src = garmin_data_p->outbuffer+GARMIN_PKTHDR_LENGTH;
+	if (k > (GARMIN_PKTHDR_LENGTH-2)) {
+		/* can't add stuffing DLEs in place, move data to end
+		   of buffer ... */
+		dst = garmin_data_p->outbuffer+GPS_OUT_BUFSIZ-datalen;
+		memcpy(dst, src, datalen);
+		src = dst;
+	}
+
+	dst = garmin_data_p->outbuffer;
+
+	*dst++ = DLE;
+	*dst++ = pktid;
+	cksum += pktid;
+	*dst++ = datalen;
+	cksum += datalen;
+	if (datalen == DLE)
+		*dst++ = DLE;
+
+	for (i = 0; i < datalen; i++) {
+		__u8 c = *src++;
+		*dst++ = c;
+		cksum += c;
+		if (c == DLE)
+			*dst++ = DLE;
+	}
+
+	cksum = -cksum & 0xFF;
+	*dst++ = cksum;
+	if (cksum == DLE)
+		*dst++ = DLE;
+	*dst++ = DLE;
+	*dst++ = ETX;
+
+	i = dst-garmin_data_p->outbuffer;
+
+	send_to_tty(garmin_data_p->port, garmin_data_p->outbuffer, i);
+
+	garmin_data_p->pkt_id = pktid;
+	garmin_data_p->state  = STATE_WAIT_TTY_ACK;
+
+	return i;
+}
+
+
+/*
+ * Process the next pending data packet - if there is one
+ */
+static int gsp_next_packet(struct garmin_data *garmin_data_p)
+{
+	int result = 0;
+	struct garmin_packet *pkt = NULL;
+
+	while ((pkt = pkt_pop(garmin_data_p)) != NULL) {
+		dev_dbg(&garmin_data_p->port->dev, "%s - next pkt: %d\n", __func__, pkt->seq);
+		result = gsp_send(garmin_data_p, pkt->data, pkt->size);
+		if (result > 0) {
+			kfree(pkt);
+			return result;
+		}
+		kfree(pkt);
+	}
+	return result;
+}
+
+
+
+/******************************************************************************
+ * garmin native mode
+ ******************************************************************************/
+
+
+/*
+ * Called for data received from tty
+ *
+ * The input data is expected to be in garmin usb-packet format.
+ *
+ * buf contains the data read, it may span more than one packet
+ * or even incomplete packets
+ */
+static int nat_receive(struct garmin_data *garmin_data_p,
+		       const unsigned char *buf, int count)
+{
+	unsigned long flags;
+	__u8 *dest;
+	int offs = 0;
+	int result = count;
+	int len;
+
+	while (offs < count) {
+		/* if buffer contains header, copy rest of data */
+		if (garmin_data_p->insize >= GARMIN_PKTHDR_LENGTH)
+			len = GARMIN_PKTHDR_LENGTH
+			      +getDataLength(garmin_data_p->inbuffer);
+		else
+			len = GARMIN_PKTHDR_LENGTH;
+
+		if (len >= GPS_IN_BUFSIZ) {
+			/* seems to be an invalid packet, ignore rest
+			   of input */
+			dev_dbg(&garmin_data_p->port->dev,
+				"%s - packet size too large: %d\n",
+				__func__, len);
+			garmin_data_p->insize = 0;
+			count = 0;
+			result = -EINVPKT;
+		} else {
+			len -= garmin_data_p->insize;
+			if (len > (count-offs))
+				len = (count-offs);
+			if (len > 0) {
+				dest = garmin_data_p->inbuffer
+						+ garmin_data_p->insize;
+				memcpy(dest, buf+offs, len);
+				garmin_data_p->insize += len;
+				offs += len;
+			}
+		}
+
+		/* do we have a complete packet ? */
+		if (garmin_data_p->insize >= GARMIN_PKTHDR_LENGTH) {
+			len = GARMIN_PKTHDR_LENGTH+
+			   getDataLength(garmin_data_p->inbuffer);
+			if (garmin_data_p->insize >= len) {
+				garmin_write_bulk(garmin_data_p->port,
+						   garmin_data_p->inbuffer,
+						   len, 0);
+				garmin_data_p->insize = 0;
+
+				/* if this was an abort-transfer command,
+				   flush all queued data. */
+				if (isAbortTrfCmnd(garmin_data_p->inbuffer)) {
+					spin_lock_irqsave(&garmin_data_p->lock,
+									flags);
+					garmin_data_p->flags |= FLAGS_DROP_DATA;
+					spin_unlock_irqrestore(
+						&garmin_data_p->lock, flags);
+					pkt_clear(garmin_data_p);
+				}
+			}
+		}
+	}
+	return result;
+}
+
+
+/******************************************************************************
+ * private packets
+ ******************************************************************************/
+
+static void priv_status_resp(struct usb_serial_port *port)
+{
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
+	__le32 *pkt = (__le32 *)garmin_data_p->privpkt;
+
+	pkt[0] = __cpu_to_le32(GARMIN_LAYERID_PRIVATE);
+	pkt[1] = __cpu_to_le32(PRIV_PKTID_INFO_RESP);
+	pkt[2] = __cpu_to_le32(12);
+	pkt[3] = __cpu_to_le32(VERSION_MAJOR << 16 | VERSION_MINOR);
+	pkt[4] = __cpu_to_le32(garmin_data_p->mode);
+	pkt[5] = __cpu_to_le32(garmin_data_p->serial_num);
+
+	send_to_tty(port, (__u8 *)pkt, 6 * 4);
+}
+
+
+/******************************************************************************
+ * Garmin specific driver functions
+ ******************************************************************************/
+
+static int process_resetdev_request(struct usb_serial_port *port)
+{
+	unsigned long flags;
+	int status;
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
+
+	spin_lock_irqsave(&garmin_data_p->lock, flags);
+	garmin_data_p->flags &= ~(CLEAR_HALT_REQUIRED);
+	garmin_data_p->state = STATE_RESET;
+	garmin_data_p->serial_num = 0;
+	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
+	usb_kill_urb(port->interrupt_in_urb);
+	dev_dbg(&port->dev, "%s - usb_reset_device\n", __func__);
+	status = usb_reset_device(port->serial->dev);
+	if (status)
+		dev_dbg(&port->dev, "%s - usb_reset_device failed: %d\n",
+			__func__, status);
+	return status;
+}
+
+
+
+/*
+ * clear all cached data
+ */
+static int garmin_clear(struct garmin_data *garmin_data_p)
+{
+	unsigned long flags;
+
+	/* flush all queued data */
+	pkt_clear(garmin_data_p);
+
+	spin_lock_irqsave(&garmin_data_p->lock, flags);
+	garmin_data_p->insize = 0;
+	garmin_data_p->outsize = 0;
+	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
+	return 0;
+}
+
+
+static int garmin_init_session(struct usb_serial_port *port)
+{
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
+	int status;
+	int i;
+
+	usb_kill_urb(port->interrupt_in_urb);
+
+	status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (status) {
+		dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
+				status);
+		return status;
+	}
+
+	/*
+	 * using the initialization method from gpsbabel. See comments in
+	 * gpsbabel/jeeps/gpslibusb.c gusb_reset_toggles()
+	 */
+	dev_dbg(&port->dev, "%s - starting session ...\n", __func__);
+	garmin_data_p->state = STATE_ACTIVE;
+
+	for (i = 0; i < 3; i++) {
+		status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ,
+				sizeof(GARMIN_START_SESSION_REQ), 0);
+		if (status < 0)
+			goto err_kill_urbs;
+	}
+
+	return 0;
+
+err_kill_urbs:
+	usb_kill_anchored_urbs(&garmin_data_p->write_urbs);
+	usb_kill_urb(port->interrupt_in_urb);
+
+	return status;
+}
+
+
+
+static int garmin_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	unsigned long flags;
+	int status = 0;
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
+
+	spin_lock_irqsave(&garmin_data_p->lock, flags);
+	garmin_data_p->mode  = initial_mode;
+	garmin_data_p->count = 0;
+	garmin_data_p->flags &= FLAGS_SESSION_REPLY1_SEEN;
+	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
+	/* shutdown any bulk reads that might be going on */
+	usb_kill_urb(port->read_urb);
+
+	if (garmin_data_p->state == STATE_RESET)
+		status = garmin_init_session(port);
+
+	garmin_data_p->state = STATE_ACTIVE;
+	return status;
+}
+
+
+static void garmin_close(struct usb_serial_port *port)
+{
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
+
+	dev_dbg(&port->dev, "%s - mode=%d state=%d flags=0x%X\n",
+		__func__, garmin_data_p->mode, garmin_data_p->state,
+		garmin_data_p->flags);
+
+	garmin_clear(garmin_data_p);
+
+	/* shutdown our urbs */
+	usb_kill_urb(port->read_urb);
+	usb_kill_anchored_urbs(&garmin_data_p->write_urbs);
+
+	/* keep reset state so we know that we must start a new session */
+	if (garmin_data_p->state != STATE_RESET)
+		garmin_data_p->state = STATE_DISCONNECTED;
+}
+
+
+static void garmin_write_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+
+	if (port) {
+		struct garmin_data *garmin_data_p =
+					usb_get_serial_port_data(port);
+
+		if (getLayerId(urb->transfer_buffer) == GARMIN_LAYERID_APPL) {
+
+			if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
+				gsp_send_ack(garmin_data_p,
+					((__u8 *)urb->transfer_buffer)[4]);
+			}
+		}
+		usb_serial_port_softint(port);
+	}
+
+	/* Ignore errors that resulted from garmin_write_bulk with
+	   dismiss_ack = 1 */
+
+	/* free up the transfer buffer, as usb_free_urb() does not do this */
+	kfree(urb->transfer_buffer);
+}
+
+
+static int garmin_write_bulk(struct usb_serial_port *port,
+			      const unsigned char *buf, int count,
+			      int dismiss_ack)
+{
+	unsigned long flags;
+	struct usb_serial *serial = port->serial;
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
+	struct urb *urb;
+	unsigned char *buffer;
+	int status;
+
+	spin_lock_irqsave(&garmin_data_p->lock, flags);
+	garmin_data_p->flags &= ~FLAGS_DROP_DATA;
+	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
+	buffer = kmemdup(buf, count, GFP_ATOMIC);
+	if (!buffer)
+		return -ENOMEM;
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb) {
+		kfree(buffer);
+		return -ENOMEM;
+	}
+
+	usb_serial_debug_data(&port->dev, __func__, count, buffer);
+
+	usb_fill_bulk_urb(urb, serial->dev,
+				usb_sndbulkpipe(serial->dev,
+					port->bulk_out_endpointAddress),
+				buffer, count,
+				garmin_write_bulk_callback,
+				dismiss_ack ? NULL : port);
+	urb->transfer_flags |= URB_ZERO_PACKET;
+
+	if (getLayerId(buffer) == GARMIN_LAYERID_APPL) {
+
+		spin_lock_irqsave(&garmin_data_p->lock, flags);
+		garmin_data_p->flags |= APP_REQ_SEEN;
+		spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
+		if (garmin_data_p->mode == MODE_GARMIN_SERIAL)  {
+			pkt_clear(garmin_data_p);
+			garmin_data_p->state = STATE_GSP_WAIT_DATA;
+		}
+	}
+
+	/* send it down the pipe */
+	usb_anchor_urb(urb, &garmin_data_p->write_urbs);
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status) {
+		dev_err(&port->dev,
+		   "%s - usb_submit_urb(write bulk) failed with status = %d\n",
+				__func__, status);
+		count = status;
+		usb_unanchor_urb(urb);
+		kfree(buffer);
+	}
+
+	/* we are done with this urb, so let the host driver
+	 * really free it when it is finished with it */
+	usb_free_urb(urb);
+
+	return count;
+}
+
+static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
+					 const unsigned char *buf, int count)
+{
+	struct device *dev = &port->dev;
+	int pktid, pktsiz, len;
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
+	__le32 *privpkt = (__le32 *)garmin_data_p->privpkt;
+
+	usb_serial_debug_data(dev, __func__, count, buf);
+
+	if (garmin_data_p->state == STATE_RESET)
+		return -EIO;
+
+	/* check for our private packets */
+	if (count >= GARMIN_PKTHDR_LENGTH) {
+		len = PRIVPKTSIZ;
+		if (count < len)
+			len = count;
+
+		memcpy(garmin_data_p->privpkt, buf, len);
+
+		pktsiz = getDataLength(garmin_data_p->privpkt);
+		pktid  = getPacketId(garmin_data_p->privpkt);
+
+		if (count == (GARMIN_PKTHDR_LENGTH + pktsiz) &&
+				getLayerId(garmin_data_p->privpkt) ==
+						GARMIN_LAYERID_PRIVATE) {
+
+			dev_dbg(dev, "%s - processing private request %d\n",
+				__func__, pktid);
+
+			/* drop all unfinished transfers */
+			garmin_clear(garmin_data_p);
+
+			switch (pktid) {
+			case PRIV_PKTID_SET_MODE:
+				if (pktsiz != 4)
+					return -EINVPKT;
+				garmin_data_p->mode = __le32_to_cpu(privpkt[3]);
+				dev_dbg(dev, "%s - mode set to %d\n",
+					__func__, garmin_data_p->mode);
+				break;
+
+			case PRIV_PKTID_INFO_REQ:
+				priv_status_resp(port);
+				break;
+
+			case PRIV_PKTID_RESET_REQ:
+				process_resetdev_request(port);
+				break;
+
+			case PRIV_PKTID_SET_DEF_MODE:
+				if (pktsiz != 4)
+					return -EINVPKT;
+				initial_mode = __le32_to_cpu(privpkt[3]);
+				dev_dbg(dev, "%s - initial_mode set to %d\n",
+					__func__,
+					garmin_data_p->mode);
+				break;
+			}
+			return count;
+		}
+	}
+
+	if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
+		return gsp_receive(garmin_data_p, buf, count);
+	} else {	/* MODE_NATIVE */
+		return nat_receive(garmin_data_p, buf, count);
+	}
+}
+
+
+static unsigned int garmin_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	/*
+	 * Report back the bytes currently available in the output buffer.
+	 */
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
+	return GPS_OUT_BUFSIZ-garmin_data_p->outsize;
+}
+
+
+static void garmin_read_process(struct garmin_data *garmin_data_p,
+				 unsigned char *data, unsigned data_length,
+				 int bulk_data)
+{
+	unsigned long flags;
+
+	if (garmin_data_p->flags & FLAGS_DROP_DATA) {
+		/* abort-transfer cmd is active */
+		dev_dbg(&garmin_data_p->port->dev, "%s - pkt dropped\n", __func__);
+	} else if (garmin_data_p->state != STATE_DISCONNECTED &&
+		garmin_data_p->state != STATE_RESET) {
+
+		/* if throttling is active or postprecessing is required
+		   put the received data in the input queue, otherwise
+		   send it directly to the tty port */
+		if (garmin_data_p->flags & FLAGS_QUEUING) {
+			pkt_add(garmin_data_p, data, data_length);
+		} else if (bulk_data || (data_length >= sizeof(u32) &&
+				getLayerId(data) == GARMIN_LAYERID_APPL)) {
+
+			spin_lock_irqsave(&garmin_data_p->lock, flags);
+			garmin_data_p->flags |= APP_RESP_SEEN;
+			spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
+			if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
+				pkt_add(garmin_data_p, data, data_length);
+			} else {
+				send_to_tty(garmin_data_p->port, data,
+						data_length);
+			}
+		}
+		/* ignore system layer packets ... */
+	}
+}
+
+
+static void garmin_read_bulk_callback(struct urb *urb)
+{
+	unsigned long flags;
+	struct usb_serial_port *port = urb->context;
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
+	unsigned char *data = urb->transfer_buffer;
+	int status = urb->status;
+	int retval;
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n",
+			__func__, status);
+		return;
+	}
+
+	usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
+
+	garmin_read_process(garmin_data_p, data, urb->actual_length, 1);
+
+	if (urb->actual_length == 0 &&
+			(garmin_data_p->flags & FLAGS_BULK_IN_RESTART) != 0) {
+		spin_lock_irqsave(&garmin_data_p->lock, flags);
+		garmin_data_p->flags &= ~FLAGS_BULK_IN_RESTART;
+		spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+		retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+		if (retval)
+			dev_err(&port->dev,
+				"%s - failed resubmitting read urb, error %d\n",
+				__func__, retval);
+	} else if (urb->actual_length > 0) {
+		/* Continue trying to read until nothing more is received  */
+		if ((garmin_data_p->flags & FLAGS_THROTTLED) == 0) {
+			retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+			if (retval)
+				dev_err(&port->dev,
+					"%s - failed resubmitting read urb, error %d\n",
+					__func__, retval);
+		}
+	} else {
+		dev_dbg(&port->dev, "%s - end of bulk data\n", __func__);
+		spin_lock_irqsave(&garmin_data_p->lock, flags);
+		garmin_data_p->flags &= ~FLAGS_BULK_IN_ACTIVE;
+		spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+	}
+}
+
+
+static void garmin_read_int_callback(struct urb *urb)
+{
+	unsigned long flags;
+	int retval;
+	struct usb_serial_port *port = urb->context;
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
+	unsigned char *data = urb->transfer_buffer;
+	int status = urb->status;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
+		return;
+	default:
+		dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
+		return;
+	}
+
+	usb_serial_debug_data(&port->dev, __func__, urb->actual_length,
+			      urb->transfer_buffer);
+
+	if (urb->actual_length == sizeof(GARMIN_BULK_IN_AVAIL_REPLY) &&
+		memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY,
+				sizeof(GARMIN_BULK_IN_AVAIL_REPLY)) == 0) {
+
+		dev_dbg(&port->dev, "%s - bulk data available.\n", __func__);
+
+		if ((garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE) == 0) {
+
+			/* bulk data available */
+			retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+			if (retval) {
+				dev_err(&port->dev,
+				 "%s - failed submitting read urb, error %d\n",
+							__func__, retval);
+			} else {
+				spin_lock_irqsave(&garmin_data_p->lock, flags);
+				garmin_data_p->flags |= FLAGS_BULK_IN_ACTIVE;
+				spin_unlock_irqrestore(&garmin_data_p->lock,
+									flags);
+			}
+		} else {
+			/* bulk-in transfer still active */
+			spin_lock_irqsave(&garmin_data_p->lock, flags);
+			garmin_data_p->flags |= FLAGS_BULK_IN_RESTART;
+			spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+		}
+
+	} else if (urb->actual_length == (4+sizeof(GARMIN_START_SESSION_REPLY))
+			 && memcmp(data, GARMIN_START_SESSION_REPLY,
+				 sizeof(GARMIN_START_SESSION_REPLY)) == 0) {
+
+		spin_lock_irqsave(&garmin_data_p->lock, flags);
+		garmin_data_p->flags |= FLAGS_SESSION_REPLY1_SEEN;
+		spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
+		/* save the serial number */
+		garmin_data_p->serial_num = __le32_to_cpup(
+					(__le32 *)(data+GARMIN_PKTHDR_LENGTH));
+
+		dev_dbg(&port->dev, "%s - start-of-session reply seen - serial %u.\n",
+			__func__, garmin_data_p->serial_num);
+	}
+
+	garmin_read_process(garmin_data_p, data, urb->actual_length, 0);
+
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&urb->dev->dev,
+			"%s - Error %d submitting interrupt urb\n",
+			__func__, retval);
+}
+
+
+/*
+ * Sends the next queued packt to the tty port (garmin native mode only)
+ * and then sets a timer to call itself again until all queued data
+ * is sent.
+ */
+static int garmin_flush_queue(struct garmin_data *garmin_data_p)
+{
+	unsigned long flags;
+	struct garmin_packet *pkt;
+
+	if ((garmin_data_p->flags & FLAGS_THROTTLED) == 0) {
+		pkt = pkt_pop(garmin_data_p);
+		if (pkt != NULL) {
+			send_to_tty(garmin_data_p->port, pkt->data, pkt->size);
+			kfree(pkt);
+			mod_timer(&garmin_data_p->timer, (1)+jiffies);
+
+		} else {
+			spin_lock_irqsave(&garmin_data_p->lock, flags);
+			garmin_data_p->flags &= ~FLAGS_QUEUING;
+			spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+		}
+	}
+	return 0;
+}
+
+
+static void garmin_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
+
+	/* set flag, data received will be put into a queue
+	   for later processing */
+	spin_lock_irq(&garmin_data_p->lock);
+	garmin_data_p->flags |= FLAGS_QUEUING|FLAGS_THROTTLED;
+	spin_unlock_irq(&garmin_data_p->lock);
+}
+
+
+static void garmin_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
+	int status;
+
+	spin_lock_irq(&garmin_data_p->lock);
+	garmin_data_p->flags &= ~FLAGS_THROTTLED;
+	spin_unlock_irq(&garmin_data_p->lock);
+
+	/* in native mode send queued data to tty, in
+	   serial mode nothing needs to be done here */
+	if (garmin_data_p->mode == MODE_NATIVE)
+		garmin_flush_queue(garmin_data_p);
+
+	if ((garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE) != 0) {
+		status = usb_submit_urb(port->read_urb, GFP_KERNEL);
+		if (status)
+			dev_err(&port->dev,
+				"%s - failed resubmitting read urb, error %d\n",
+				__func__, status);
+	}
+}
+
+/*
+ * The timer is currently only used to send queued packets to
+ * the tty in cases where the protocol provides no own handshaking
+ * to initiate the transfer.
+ */
+static void timeout_handler(struct timer_list *t)
+{
+	struct garmin_data *garmin_data_p = from_timer(garmin_data_p, t, timer);
+
+	/* send the next queued packet to the tty port */
+	if (garmin_data_p->mode == MODE_NATIVE)
+		if (garmin_data_p->flags & FLAGS_QUEUING)
+			garmin_flush_queue(garmin_data_p);
+}
+
+
+
+static int garmin_port_probe(struct usb_serial_port *port)
+{
+	int status;
+	struct garmin_data *garmin_data_p;
+
+	garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL);
+	if (!garmin_data_p)
+		return -ENOMEM;
+
+	timer_setup(&garmin_data_p->timer, timeout_handler, 0);
+	spin_lock_init(&garmin_data_p->lock);
+	INIT_LIST_HEAD(&garmin_data_p->pktlist);
+	garmin_data_p->port = port;
+	garmin_data_p->state = 0;
+	garmin_data_p->flags = 0;
+	garmin_data_p->count = 0;
+	init_usb_anchor(&garmin_data_p->write_urbs);
+	usb_set_serial_port_data(port, garmin_data_p);
+
+	status = garmin_init_session(port);
+	if (status)
+		goto err_free;
+
+	return 0;
+err_free:
+	kfree(garmin_data_p);
+
+	return status;
+}
+
+
+static void garmin_port_remove(struct usb_serial_port *port)
+{
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
+
+	usb_kill_anchored_urbs(&garmin_data_p->write_urbs);
+	usb_kill_urb(port->interrupt_in_urb);
+	del_timer_sync(&garmin_data_p->timer);
+	kfree(garmin_data_p);
+}
+
+
+/* All of the device info needed */
+static struct usb_serial_driver garmin_device = {
+	.driver = {
+		.owner       = THIS_MODULE,
+		.name        = "garmin_gps",
+	},
+	.description         = "Garmin GPS usb/tty",
+	.id_table            = id_table,
+	.num_ports           = 1,
+	.open                = garmin_open,
+	.close               = garmin_close,
+	.throttle            = garmin_throttle,
+	.unthrottle          = garmin_unthrottle,
+	.port_probe		= garmin_port_probe,
+	.port_remove		= garmin_port_remove,
+	.write               = garmin_write,
+	.write_room          = garmin_write_room,
+	.write_bulk_callback = garmin_write_bulk_callback,
+	.read_bulk_callback  = garmin_read_bulk_callback,
+	.read_int_callback   = garmin_read_int_callback,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&garmin_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(initial_mode, int, 0444);
+MODULE_PARM_DESC(initial_mode, "Initial mode");
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
new file mode 100644
index 000000000..15b6dee3a
--- /dev/null
+++ b/drivers/usb/serial/generic.c
@@ -0,0 +1,658 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Serial Converter Generic functions
+ *
+ * Copyright (C) 2010 - 2013 Johan Hovold (jhovold@gmail.com)
+ * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched/signal.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/sysrq.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+#include <linux/kfifo.h>
+#include <linux/serial.h>
+
+#ifdef CONFIG_USB_SERIAL_GENERIC
+
+static __u16 vendor  = 0x05f9;
+static __u16 product = 0xffff;
+
+module_param(vendor, ushort, 0);
+MODULE_PARM_DESC(vendor, "User specified USB idVendor");
+
+module_param(product, ushort, 0);
+MODULE_PARM_DESC(product, "User specified USB idProduct");
+
+static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
+
+static int usb_serial_generic_probe(struct usb_serial *serial,
+					const struct usb_device_id *id)
+{
+	struct device *dev = &serial->interface->dev;
+
+	dev_info(dev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n");
+	dev_info(dev, "Tell linux-usb@vger.kernel.org to add your device to a proper driver.\n");
+
+	return 0;
+}
+
+static int usb_serial_generic_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds)
+{
+	struct device *dev = &serial->interface->dev;
+	int num_ports;
+
+	num_ports = max(epds->num_bulk_in, epds->num_bulk_out);
+
+	if (num_ports == 0) {
+		dev_err(dev, "device has no bulk endpoints\n");
+		return -ENODEV;
+	}
+
+	return num_ports;
+}
+
+static struct usb_serial_driver usb_serial_generic_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"generic",
+	},
+	.id_table =		generic_device_ids,
+	.probe =		usb_serial_generic_probe,
+	.calc_num_ports =	usb_serial_generic_calc_num_ports,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+	.resume =		usb_serial_generic_resume,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&usb_serial_generic_device, NULL
+};
+
+#endif
+
+int usb_serial_generic_register(void)
+{
+	int retval = 0;
+
+#ifdef CONFIG_USB_SERIAL_GENERIC
+	generic_device_ids[0].idVendor = vendor;
+	generic_device_ids[0].idProduct = product;
+	generic_device_ids[0].match_flags =
+		USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT;
+
+	retval = usb_serial_register_drivers(serial_drivers,
+			"usbserial_generic", generic_device_ids);
+#endif
+	return retval;
+}
+
+void usb_serial_generic_deregister(void)
+{
+#ifdef CONFIG_USB_SERIAL_GENERIC
+	usb_serial_deregister_drivers(serial_drivers);
+#endif
+}
+
+int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	int result = 0;
+
+	clear_bit(USB_SERIAL_THROTTLED, &port->flags);
+
+	if (port->bulk_in_size)
+		result = usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
+
+	return result;
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_open);
+
+void usb_serial_generic_close(struct usb_serial_port *port)
+{
+	unsigned long flags;
+	int i;
+
+	if (port->bulk_out_size) {
+		for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
+			usb_kill_urb(port->write_urbs[i]);
+
+		spin_lock_irqsave(&port->lock, flags);
+		kfifo_reset_out(&port->write_fifo);
+		spin_unlock_irqrestore(&port->lock, flags);
+	}
+	if (port->bulk_in_size) {
+		for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
+			usb_kill_urb(port->read_urbs[i]);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_close);
+
+int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
+{
+	return kfifo_out_locked(&port->write_fifo, dest, size, &port->lock);
+}
+
+/**
+ * usb_serial_generic_write_start - start writing buffered data
+ * @port: usb-serial port
+ * @mem_flags: flags to use for memory allocations
+ *
+ * Serialised using USB_SERIAL_WRITE_BUSY flag.
+ *
+ * Return: Zero on success or if busy, otherwise a negative errno value.
+ */
+int usb_serial_generic_write_start(struct usb_serial_port *port,
+							gfp_t mem_flags)
+{
+	struct urb *urb;
+	int count, result;
+	unsigned long flags;
+	int i;
+
+	if (test_and_set_bit_lock(USB_SERIAL_WRITE_BUSY, &port->flags))
+		return 0;
+retry:
+	spin_lock_irqsave(&port->lock, flags);
+	if (!port->write_urbs_free || !kfifo_len(&port->write_fifo)) {
+		clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
+		spin_unlock_irqrestore(&port->lock, flags);
+		return 0;
+	}
+	i = (int)find_first_bit(&port->write_urbs_free,
+						ARRAY_SIZE(port->write_urbs));
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	urb = port->write_urbs[i];
+	count = port->serial->type->prepare_write_buffer(port,
+						urb->transfer_buffer,
+						port->bulk_out_size);
+	urb->transfer_buffer_length = count;
+	usb_serial_debug_data(&port->dev, __func__, count, urb->transfer_buffer);
+	spin_lock_irqsave(&port->lock, flags);
+	port->tx_bytes += count;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	clear_bit(i, &port->write_urbs_free);
+	result = usb_submit_urb(urb, mem_flags);
+	if (result) {
+		dev_err_console(port, "%s - error submitting urb: %d\n",
+						__func__, result);
+		set_bit(i, &port->write_urbs_free);
+		spin_lock_irqsave(&port->lock, flags);
+		port->tx_bytes -= count;
+		spin_unlock_irqrestore(&port->lock, flags);
+
+		clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
+		return result;
+	}
+
+	goto retry;	/* try sending off another urb */
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_write_start);
+
+/**
+ * usb_serial_generic_write - generic write function
+ * @tty: tty for the port
+ * @port: usb-serial port
+ * @buf: data to write
+ * @count: number of bytes to write
+ *
+ * Return: The number of characters buffered, which may be anything from
+ * zero to @count, or a negative errno value.
+ */
+int usb_serial_generic_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count)
+{
+	int result;
+
+	if (!port->bulk_out_size)
+		return -ENODEV;
+
+	if (!count)
+		return 0;
+
+	count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
+	result = usb_serial_generic_write_start(port, GFP_ATOMIC);
+	if (result)
+		return result;
+
+	return count;
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_write);
+
+unsigned int usb_serial_generic_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned long flags;
+	unsigned int room;
+
+	if (!port->bulk_out_size)
+		return 0;
+
+	spin_lock_irqsave(&port->lock, flags);
+	room = kfifo_avail(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	dev_dbg(&port->dev, "%s - returns %u\n", __func__, room);
+	return room;
+}
+
+unsigned int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned long flags;
+	unsigned int chars;
+
+	if (!port->bulk_out_size)
+		return 0;
+
+	spin_lock_irqsave(&port->lock, flags);
+	chars = kfifo_len(&port->write_fifo) + port->tx_bytes;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars);
+	return chars;
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_chars_in_buffer);
+
+void usb_serial_generic_wait_until_sent(struct tty_struct *tty, long timeout)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned int bps;
+	unsigned long period;
+	unsigned long expire;
+
+	bps = tty_get_baud_rate(tty);
+	if (!bps)
+		bps = 9600;	/* B0 */
+	/*
+	 * Use a poll-period of roughly the time it takes to send one
+	 * character or at least one jiffy.
+	 */
+	period = max_t(unsigned long, (10 * HZ / bps), 1);
+	if (timeout)
+		period = min_t(unsigned long, period, timeout);
+
+	dev_dbg(&port->dev, "%s - timeout = %u ms, period = %u ms\n",
+					__func__, jiffies_to_msecs(timeout),
+					jiffies_to_msecs(period));
+	expire = jiffies + timeout;
+	while (!port->serial->type->tx_empty(port)) {
+		schedule_timeout_interruptible(period);
+		if (signal_pending(current))
+			break;
+		if (timeout && time_after(jiffies, expire))
+			break;
+	}
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_wait_until_sent);
+
+static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
+						int index, gfp_t mem_flags)
+{
+	int res;
+
+	if (!test_and_clear_bit(index, &port->read_urbs_free))
+		return 0;
+
+	dev_dbg(&port->dev, "%s - urb %d\n", __func__, index);
+
+	res = usb_submit_urb(port->read_urbs[index], mem_flags);
+	if (res) {
+		if (res != -EPERM && res != -ENODEV) {
+			dev_err(&port->dev,
+					"%s - usb_submit_urb failed: %d\n",
+					__func__, res);
+		}
+		set_bit(index, &port->read_urbs_free);
+		return res;
+	}
+
+	return 0;
+}
+
+int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port,
+					gfp_t mem_flags)
+{
+	int res;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
+		res = usb_serial_generic_submit_read_urb(port, i, mem_flags);
+		if (res)
+			goto err;
+	}
+
+	return 0;
+err:
+	for (; i >= 0; --i)
+		usb_kill_urb(port->read_urbs[i]);
+
+	return res;
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_submit_read_urbs);
+
+void usb_serial_generic_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	char *ch = urb->transfer_buffer;
+	int i;
+
+	if (!urb->actual_length)
+		return;
+	/*
+	 * The per character mucking around with sysrq path it too slow for
+	 * stuff like 3G modems, so shortcircuit it in the 99.9999999% of
+	 * cases where the USB serial is not a console anyway.
+	 */
+	if (port->sysrq) {
+		for (i = 0; i < urb->actual_length; i++, ch++) {
+			if (!usb_serial_handle_sysrq_char(port, *ch))
+				tty_insert_flip_char(&port->port, *ch, TTY_NORMAL);
+		}
+	} else {
+		tty_insert_flip_string(&port->port, ch, urb->actual_length);
+	}
+	tty_flip_buffer_push(&port->port);
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_process_read_urb);
+
+void usb_serial_generic_read_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	bool stopped = false;
+	int status = urb->status;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
+		if (urb == port->read_urbs[i])
+			break;
+	}
+
+	dev_dbg(&port->dev, "%s - urb %d, len %d\n", __func__, i,
+							urb->actual_length);
+	switch (status) {
+	case 0:
+		usb_serial_debug_data(&port->dev, __func__, urb->actual_length,
+							data);
+		port->serial->type->process_read_urb(urb);
+		break;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		dev_dbg(&port->dev, "%s - urb stopped: %d\n",
+							__func__, status);
+		stopped = true;
+		break;
+	case -EPIPE:
+		dev_err(&port->dev, "%s - urb stopped: %d\n",
+							__func__, status);
+		stopped = true;
+		break;
+	default:
+		dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
+							__func__, status);
+		break;
+	}
+
+	/*
+	 * Make sure URB processing is done before marking as free to avoid
+	 * racing with unthrottle() on another CPU. Matches the barriers
+	 * implied by the test_and_clear_bit() in
+	 * usb_serial_generic_submit_read_urb().
+	 */
+	smp_mb__before_atomic();
+	set_bit(i, &port->read_urbs_free);
+	/*
+	 * Make sure URB is marked as free before checking the throttled flag
+	 * to avoid racing with unthrottle() on another CPU. Matches the
+	 * smp_mb__after_atomic() in unthrottle().
+	 */
+	smp_mb__after_atomic();
+
+	if (stopped)
+		return;
+
+	if (test_bit(USB_SERIAL_THROTTLED, &port->flags))
+		return;
+
+	usb_serial_generic_submit_read_urb(port, i, GFP_ATOMIC);
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
+
+void usb_serial_generic_write_bulk_callback(struct urb *urb)
+{
+	unsigned long flags;
+	struct usb_serial_port *port = urb->context;
+	int status = urb->status;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
+		if (port->write_urbs[i] == urb)
+			break;
+	}
+	spin_lock_irqsave(&port->lock, flags);
+	port->tx_bytes -= urb->transfer_buffer_length;
+	set_bit(i, &port->write_urbs_free);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	switch (status) {
+	case 0:
+		break;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		dev_dbg(&port->dev, "%s - urb stopped: %d\n",
+							__func__, status);
+		return;
+	case -EPIPE:
+		dev_err_console(port, "%s - urb stopped: %d\n",
+							__func__, status);
+		return;
+	default:
+		dev_err_console(port, "%s - nonzero urb status: %d\n",
+							__func__, status);
+		break;
+	}
+
+	usb_serial_generic_write_start(port, GFP_ATOMIC);
+	usb_serial_port_softint(port);
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback);
+
+void usb_serial_generic_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	set_bit(USB_SERIAL_THROTTLED, &port->flags);
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_throttle);
+
+void usb_serial_generic_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	clear_bit(USB_SERIAL_THROTTLED, &port->flags);
+
+	/*
+	 * Matches the smp_mb__after_atomic() in
+	 * usb_serial_generic_read_bulk_callback().
+	 */
+	smp_mb__after_atomic();
+
+	usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_unthrottle);
+
+static bool usb_serial_generic_msr_changed(struct tty_struct *tty,
+				unsigned long arg, struct async_icount *cprev)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct async_icount cnow;
+	unsigned long flags;
+	bool ret;
+
+	/*
+	 * Use tty-port initialised flag to detect all hangups including the
+	 * one generated at USB-device disconnect.
+	 */
+	if (!tty_port_initialized(&port->port))
+		return true;
+
+	spin_lock_irqsave(&port->lock, flags);
+	cnow = port->icount;				/* atomic copy*/
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	ret =	((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
+		((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
+		((arg & TIOCM_CD)  && (cnow.dcd != cprev->dcd)) ||
+		((arg & TIOCM_CTS) && (cnow.cts != cprev->cts));
+
+	*cprev = cnow;
+
+	return ret;
+}
+
+int usb_serial_generic_tiocmiwait(struct tty_struct *tty, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct async_icount cnow;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&port->lock, flags);
+	cnow = port->icount;				/* atomic copy */
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	ret = wait_event_interruptible(port->port.delta_msr_wait,
+			usb_serial_generic_msr_changed(tty, arg, &cnow));
+	if (!ret && !tty_port_initialized(&port->port))
+		ret = -EIO;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_tiocmiwait);
+
+int usb_serial_generic_get_icount(struct tty_struct *tty,
+					struct serial_icounter_struct *icount)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct async_icount cnow;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	cnow = port->icount;				/* atomic copy */
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->tx = cnow.tx;
+	icount->rx = cnow.rx;
+	icount->frame = cnow.frame;
+	icount->parity = cnow.parity;
+	icount->overrun = cnow.overrun;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_get_icount);
+
+#if defined(CONFIG_USB_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch)
+{
+	if (port->sysrq) {
+		if (ch && time_before(jiffies, port->sysrq)) {
+			handle_sysrq(ch);
+			port->sysrq = 0;
+			return 1;
+		}
+		port->sysrq = 0;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_serial_handle_sysrq_char);
+
+int usb_serial_handle_break(struct usb_serial_port *port)
+{
+	if (!port->port.console)
+		return 0;
+
+	if (!port->sysrq) {
+		port->sysrq = jiffies + HZ*5;
+		return 1;
+	}
+	port->sysrq = 0;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_serial_handle_break);
+#endif
+
+/**
+ * usb_serial_handle_dcd_change - handle a change of carrier detect state
+ * @port: usb-serial port
+ * @tty: tty for the port
+ * @status: new carrier detect status, nonzero if active
+ */
+void usb_serial_handle_dcd_change(struct usb_serial_port *port,
+				struct tty_struct *tty, unsigned int status)
+{
+	dev_dbg(&port->dev, "%s - status %d\n", __func__, status);
+
+	if (tty) {
+		struct tty_ldisc *ld = tty_ldisc_ref(tty);
+
+		if (ld) {
+			if (ld->ops->dcd_change)
+				ld->ops->dcd_change(tty, status);
+			tty_ldisc_deref(ld);
+		}
+	}
+
+	if (status)
+		wake_up_interruptible(&port->port.open_wait);
+	else if (tty && !C_CLOCAL(tty))
+		tty_hangup(tty);
+}
+EXPORT_SYMBOL_GPL(usb_serial_handle_dcd_change);
+
+int usb_serial_generic_resume(struct usb_serial *serial)
+{
+	struct usb_serial_port *port;
+	int i, c = 0, r;
+
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		if (!tty_port_initialized(&port->port))
+			continue;
+
+		if (port->bulk_in_size) {
+			r = usb_serial_generic_submit_read_urbs(port,
+								GFP_NOIO);
+			if (r < 0)
+				c++;
+		}
+
+		if (port->bulk_out_size) {
+			r = usb_serial_generic_write_start(port, GFP_NOIO);
+			if (r < 0)
+				c++;
+		}
+	}
+
+	return c ? -EIO : 0;
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_resume);
diff --git a/drivers/usb/serial/io_16654.h b/drivers/usb/serial/io_16654.h
new file mode 100644
index 000000000..f18501f05
--- /dev/null
+++ b/drivers/usb/serial/io_16654.h
@@ -0,0 +1,192 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/************************************************************************
+ *
+ *	16654.H		Definitions for 16C654 UART used on EdgePorts
+ *
+ *	Copyright (C) 1998 Inside Out Networks, Inc.
+ *
+ ************************************************************************/
+
+#if !defined(_16654_H)
+#define	_16654_H
+
+/************************************************************************
+ *
+ *			D e f i n e s   /   T y p e d e f s
+ *
+ ************************************************************************/
+
+	//
+	// UART register numbers
+	// Numbers 0-7 are passed to the Edgeport directly. Numbers 8 and
+	// above are used internally to indicate that we must enable access
+	// to them via LCR bit 0x80 or LCR = 0xBF.
+	// The register number sent to the Edgeport is then (x & 0x7).
+	//
+	// Driver must not access registers that affect operation of the
+	// the EdgePort firmware -- that includes THR, RHR, IER, FCR.
+
+
+#define THR			0	// ! Transmit Holding Register (Write)
+#define RDR			0	// ! Receive Holding Register (Read)
+#define IER			1	// ! Interrupt Enable Register
+#define FCR			2	// ! Fifo Control Register (Write)
+#define ISR			2	// Interrupt Status Register (Read)
+#define LCR			3	// Line Control Register
+#define MCR			4	// Modem Control Register
+#define LSR			5	// Line Status Register
+#define MSR			6	// Modem Status Register
+#define SPR			7	// ScratchPad Register
+#define DLL			8	// Bank2[ 0 ] Divisor Latch LSB
+#define DLM			9	// Bank2[ 1 ] Divisor Latch MSB
+#define EFR			10	// Bank2[ 2 ] Extended Function Register
+//efine unused			11	// Bank2[ 3 ]
+#define XON1			12	// Bank2[ 4 ] Xon-1
+#define XON2			13	// Bank2[ 5 ] Xon-2
+#define XOFF1			14	// Bank2[ 6 ] Xoff-1
+#define XOFF2			15	// Bank2[ 7 ] Xoff-2
+
+#define	NUM_16654_REGS		16
+
+#define IS_REG_2ND_BANK(x)	((x) >= 8)
+
+	//
+	// Bit definitions for each register
+	//
+
+#define IER_RX			0x01	// Enable receive interrupt
+#define IER_TX			0x02	// Enable transmit interrupt
+#define IER_RXS			0x04	// Enable receive status interrupt
+#define IER_MDM			0x08	// Enable modem status interrupt
+#define IER_SLEEP		0x10	// Enable sleep mode
+#define IER_XOFF		0x20	// Enable s/w flow control (XOFF) interrupt
+#define IER_RTS			0x40	// Enable RTS interrupt
+#define IER_CTS			0x80	// Enable CTS interrupt
+#define IER_ENABLE_ALL		0xFF	// Enable all ints
+
+
+#define FCR_FIFO_EN		0x01	// Enable FIFOs
+#define FCR_RXCLR		0x02	// Reset Rx FIFO
+#define FCR_TXCLR		0x04	// Reset Tx FIFO
+#define FCR_DMA_BLK		0x08	// Enable DMA block mode
+#define FCR_TX_LEVEL_MASK	0x30	// Mask for Tx FIFO Level
+#define FCR_TX_LEVEL_8		0x00	// Tx FIFO Level =  8 bytes
+#define FCR_TX_LEVEL_16		0x10	// Tx FIFO Level = 16 bytes
+#define FCR_TX_LEVEL_32		0x20	// Tx FIFO Level = 32 bytes
+#define FCR_TX_LEVEL_56		0x30	// Tx FIFO Level = 56 bytes
+#define FCR_RX_LEVEL_MASK	0xC0	// Mask for Rx FIFO Level
+#define FCR_RX_LEVEL_8		0x00	// Rx FIFO Level =  8 bytes
+#define FCR_RX_LEVEL_16		0x40	// Rx FIFO Level = 16 bytes
+#define FCR_RX_LEVEL_56		0x80	// Rx FIFO Level = 56 bytes
+#define FCR_RX_LEVEL_60		0xC0	// Rx FIFO Level = 60 bytes
+
+
+#define ISR_INT_MDM_STATUS	0x00	// Modem status int pending
+#define ISR_INT_NONE		0x01	// No interrupt pending
+#define ISR_INT_TXRDY		0x02	// Tx ready int pending
+#define ISR_INT_RXRDY		0x04	// Rx ready int pending
+#define ISR_INT_LINE_STATUS	0x06	// Line status int pending
+#define ISR_INT_RX_TIMEOUT	0x0C	// Rx timeout int pending
+#define ISR_INT_RX_XOFF		0x10	// Rx Xoff int pending
+#define ISR_INT_RTS_CTS		0x20	// RTS/CTS change int pending
+#define ISR_FIFO_ENABLED	0xC0	// Bits set if FIFOs enabled
+#define ISR_INT_BITS_MASK	0x3E	// Mask to isolate valid int causes
+
+
+#define LCR_BITS_5		0x00	// 5 bits/char
+#define LCR_BITS_6		0x01	// 6 bits/char
+#define LCR_BITS_7		0x02	// 7 bits/char
+#define LCR_BITS_8		0x03	// 8 bits/char
+#define LCR_BITS_MASK		0x03	// Mask for bits/char field
+
+#define LCR_STOP_1		0x00	// 1 stop bit
+#define LCR_STOP_1_5		0x04	// 1.5 stop bits (if 5   bits/char)
+#define LCR_STOP_2		0x04	// 2 stop bits   (if 6-8 bits/char)
+#define LCR_STOP_MASK		0x04	// Mask for stop bits field
+
+#define LCR_PAR_NONE		0x00	// No parity
+#define LCR_PAR_ODD		0x08	// Odd parity
+#define LCR_PAR_EVEN		0x18	// Even parity
+#define LCR_PAR_MARK		0x28	// Force parity bit to 1
+#define LCR_PAR_SPACE		0x38	// Force parity bit to 0
+#define LCR_PAR_MASK		0x38	// Mask for parity field
+
+#define LCR_SET_BREAK		0x40	// Set Break condition
+#define LCR_DL_ENABLE		0x80	// Enable access to divisor latch
+
+#define LCR_ACCESS_EFR		0xBF	// Load this value to access DLL,DLM,
+					// and also the '654-only registers
+					// EFR, XON1, XON2, XOFF1, XOFF2
+
+
+#define MCR_DTR			0x01	// Assert DTR
+#define MCR_RTS			0x02	// Assert RTS
+#define MCR_OUT1		0x04	// Loopback only: Sets state of RI
+#define MCR_MASTER_IE		0x08	// Enable interrupt outputs
+#define MCR_LOOPBACK		0x10	// Set internal (digital) loopback mode
+#define MCR_XON_ANY		0x20	// Enable any char to exit XOFF mode
+#define MCR_IR_ENABLE		0x40	// Enable IrDA functions
+#define MCR_BRG_DIV_4		0x80	// Divide baud rate clk by /4 instead of /1
+
+
+#define LSR_RX_AVAIL		0x01	// Rx data available
+#define LSR_OVER_ERR		0x02	// Rx overrun
+#define LSR_PAR_ERR		0x04	// Rx parity error
+#define LSR_FRM_ERR		0x08	// Rx framing error
+#define LSR_BREAK		0x10	// Rx break condition detected
+#define LSR_TX_EMPTY		0x20	// Tx Fifo empty
+#define LSR_TX_ALL_EMPTY	0x40	// Tx Fifo and shift register empty
+#define LSR_FIFO_ERR		0x80	// Rx Fifo contains at least 1 erred char
+
+
+#define EDGEPORT_MSR_DELTA_CTS	0x01	// CTS changed from last read
+#define EDGEPORT_MSR_DELTA_DSR	0x02	// DSR changed from last read
+#define EDGEPORT_MSR_DELTA_RI	0x04	// RI  changed from 0 -> 1
+#define EDGEPORT_MSR_DELTA_CD	0x08	// CD  changed from last read
+#define EDGEPORT_MSR_CTS	0x10	// Current state of CTS
+#define EDGEPORT_MSR_DSR	0x20	// Current state of DSR
+#define EDGEPORT_MSR_RI		0x40	// Current state of RI
+#define EDGEPORT_MSR_CD		0x80	// Current state of CD
+
+
+
+					//	Tx		Rx
+					//-------------------------------
+#define EFR_SWFC_NONE		0x00	//	None		None
+#define EFR_SWFC_RX1		0x02 	//	None		XOFF1
+#define EFR_SWFC_RX2		0x01 	//	None		XOFF2
+#define EFR_SWFC_RX12		0x03 	//	None		XOFF1 & XOFF2
+#define EFR_SWFC_TX1		0x08 	//	XOFF1		None
+#define EFR_SWFC_TX1_RX1	0x0a 	//	XOFF1		XOFF1
+#define EFR_SWFC_TX1_RX2	0x09 	//	XOFF1		XOFF2
+#define EFR_SWFC_TX1_RX12	0x0b 	//	XOFF1		XOFF1 & XOFF2
+#define EFR_SWFC_TX2		0x04 	//	XOFF2		None
+#define EFR_SWFC_TX2_RX1	0x06 	//	XOFF2		XOFF1
+#define EFR_SWFC_TX2_RX2	0x05 	//	XOFF2		XOFF2
+#define EFR_SWFC_TX2_RX12	0x07 	//	XOFF2		XOFF1 & XOFF2
+#define EFR_SWFC_TX12		0x0c 	//	XOFF1 & XOFF2	None
+#define EFR_SWFC_TX12_RX1	0x0e 	//	XOFF1 & XOFF2	XOFF1
+#define EFR_SWFC_TX12_RX2	0x0d 	//	XOFF1 & XOFF2	XOFF2
+#define EFR_SWFC_TX12_RX12	0x0f 	//	XOFF1 & XOFF2	XOFF1 & XOFF2
+
+#define EFR_TX_FC_MASK		0x0c	// Mask to isolate Rx flow control
+#define EFR_TX_FC_NONE		0x00	// No Tx Xon/Xoff flow control
+#define EFR_TX_FC_X1		0x08	// Transmit Xon1/Xoff1
+#define EFR_TX_FC_X2		0x04	// Transmit Xon2/Xoff2
+#define EFR_TX_FC_X1_2		0x0c	// Transmit Xon1&2/Xoff1&2
+
+#define EFR_RX_FC_MASK		0x03	// Mask to isolate Rx flow control
+#define EFR_RX_FC_NONE		0x00	// No Rx Xon/Xoff flow control
+#define EFR_RX_FC_X1		0x02	// Receiver compares Xon1/Xoff1
+#define EFR_RX_FC_X2		0x01	// Receiver compares Xon2/Xoff2
+#define EFR_RX_FC_X1_2		0x03	// Receiver compares Xon1&2/Xoff1&2
+
+
+#define EFR_SWFC_MASK		0x0F	// Mask for software flow control field
+#define EFR_ENABLE_16654	0x10	// Enable 16C654 features
+#define EFR_SPEC_DETECT		0x20	// Enable special character detect interrupt
+#define EFR_AUTO_RTS		0x40	// Use RTS for Rx flow control
+#define EFR_AUTO_CTS		0x80	// Use CTS for Tx flow control
+
+#endif	// if !defined(_16654_H)
+
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
new file mode 100644
index 000000000..3a4c0febf
--- /dev/null
+++ b/drivers/usb/serial/io_edgeport.c
@@ -0,0 +1,3130 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Edgeport USB Serial Converter driver
+ *
+ * Copyright (C) 2000 Inside Out Networks, All rights reserved.
+ * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
+ *
+ * Supports the following devices:
+ *	Edgeport/4
+ *	Edgeport/4t
+ *	Edgeport/2
+ *	Edgeport/4i
+ *	Edgeport/2i
+ *	Edgeport/421
+ *	Edgeport/21
+ *	Rapidport/4
+ *	Edgeport/8
+ *	Edgeport/2D8
+ *	Edgeport/4D8
+ *	Edgeport/8i
+ *
+ * For questions or problems with this driver, contact Inside Out
+ * Networks technical support, or Peter Berger <pberger@brimson.com>,
+ * or Al Borchers <alborchers@steinerpoint.com>.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/serial.h>
+#include <linux/ioctl.h>
+#include <linux/wait.h>
+#include <linux/firmware.h>
+#include <linux/ihex.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include "io_edgeport.h"
+#include "io_ionsp.h"		/* info for the iosp messages */
+#include "io_16654.h"		/* 16654 UART defines */
+
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli"
+#define DRIVER_DESC "Edgeport USB Serial Driver"
+
+#define MAX_NAME_LEN		64
+
+#define OPEN_TIMEOUT		(5*HZ)		/* 5 seconds */
+
+static const struct usb_device_id edgeport_2port_id_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_21) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2_DIN) },
+	{ }
+};
+
+static const struct usb_device_id edgeport_4port_id_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_MT4X56USB) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4_DIN) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_22I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_COMPATIBLE) },
+	{ }
+};
+
+static const struct usb_device_id edgeport_8port_id_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8R) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8RR) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_8) },
+	{ }
+};
+
+static const struct usb_device_id Epic_port_id_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0311) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0312) },
+	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) },
+	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) },
+	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) },
+	{ }
+};
+
+/* Devices that this driver supports */
+static const struct usb_device_id id_table_combined[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_RAPIDPORT_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_4T) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_MT4X56USB) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_2) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_4I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_2I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_421) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_21) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_8) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_2_DIN) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_4_DIN) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_22I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_COMPATIBLE) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_8I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8R) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8RR) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_8) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0311) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0312) },
+	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) },
+	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) },
+	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) },
+	{ } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table_combined);
+
+
+/* receive port state */
+enum RXSTATE {
+	EXPECT_HDR1 = 0,    /* Expect header byte 1 */
+	EXPECT_HDR2 = 1,    /* Expect header byte 2 */
+	EXPECT_DATA = 2,    /* Expect 'RxBytesRemaining' data */
+	EXPECT_HDR3 = 3,    /* Expect header byte 3 (for status hdrs only) */
+};
+
+
+/* Transmit Fifo
+ * This Transmit queue is an extension of the edgeport Rx buffer.
+ * The maximum amount of data buffered in both the edgeport
+ * Rx buffer (maxTxCredits) and this buffer will never exceed maxTxCredits.
+ */
+struct TxFifo {
+	unsigned int	head;	/* index to head pointer (write) */
+	unsigned int	tail;	/* index to tail pointer (read)  */
+	unsigned int	count;	/* Bytes in queue */
+	unsigned int	size;	/* Max size of queue (equal to Max number of TxCredits) */
+	unsigned char	*fifo;	/* allocated Buffer */
+};
+
+/* This structure holds all of the local port information */
+struct edgeport_port {
+	__u16			txCredits;		/* our current credits for this port */
+	__u16			maxTxCredits;		/* the max size of the port */
+
+	struct TxFifo		txfifo;			/* transmit fifo -- size will be maxTxCredits */
+	struct urb		*write_urb;		/* write URB for this port */
+	bool			write_in_progress;	/* 'true' while a write URB is outstanding */
+	spinlock_t		ep_lock;
+
+	__u8			shadowLCR;		/* last LCR value received */
+	__u8			shadowMCR;		/* last MCR value received */
+	__u8			shadowMSR;		/* last MSR value received */
+	__u8			shadowLSR;		/* last LSR value received */
+	__u8			shadowXonChar;		/* last value set as XON char in Edgeport */
+	__u8			shadowXoffChar;		/* last value set as XOFF char in Edgeport */
+	__u8			validDataMask;
+	__u32			baudRate;
+
+	bool			open;
+	bool			openPending;
+	bool			commandPending;
+	bool			closePending;
+	bool			chaseResponsePending;
+
+	wait_queue_head_t	wait_chase;		/* for handling sleeping while waiting for chase to finish */
+	wait_queue_head_t	wait_open;		/* for handling sleeping while waiting for open to finish */
+	wait_queue_head_t	wait_command;		/* for handling sleeping while waiting for command to finish */
+
+	struct usb_serial_port	*port;			/* loop back to the owner of this object */
+};
+
+
+/* This structure holds all of the individual device information */
+struct edgeport_serial {
+	char			name[MAX_NAME_LEN+2];		/* string name of this device */
+
+	struct edge_manuf_descriptor	manuf_descriptor;	/* the manufacturer descriptor */
+	struct edge_boot_descriptor	boot_descriptor;	/* the boot firmware descriptor */
+	struct edgeport_product_info	product_info;		/* Product Info */
+	struct edge_compatibility_descriptor epic_descriptor;	/* Edgeport compatible descriptor */
+	int			is_epic;			/* flag if EPiC device or not */
+
+	__u8			interrupt_in_endpoint;		/* the interrupt endpoint handle */
+	unsigned char		*interrupt_in_buffer;		/* the buffer we use for the interrupt endpoint */
+	struct urb		*interrupt_read_urb;		/* our interrupt urb */
+
+	__u8			bulk_in_endpoint;		/* the bulk in endpoint handle */
+	unsigned char		*bulk_in_buffer;		/* the buffer we use for the bulk in endpoint */
+	struct urb		*read_urb;			/* our bulk read urb */
+	bool			read_in_progress;
+	spinlock_t		es_lock;
+
+	__u8			bulk_out_endpoint;		/* the bulk out endpoint handle */
+
+	__s16			rxBytesAvail;			/* the number of bytes that we need to read from this device */
+
+	enum RXSTATE		rxState;			/* the current state of the bulk receive processor */
+	__u8			rxHeader1;			/* receive header byte 1 */
+	__u8			rxHeader2;			/* receive header byte 2 */
+	__u8			rxHeader3;			/* receive header byte 3 */
+	__u8			rxPort;				/* the port that we are currently receiving data for */
+	__u8			rxStatusCode;			/* the receive status code */
+	__u8			rxStatusParam;			/* the receive status parameter */
+	__s16			rxBytesRemaining;		/* the number of port bytes left to read */
+	struct usb_serial	*serial;			/* loop back to the owner of this object */
+};
+
+/* baud rate information */
+struct divisor_table_entry {
+	__u32   BaudRate;
+	__u16  Divisor;
+};
+
+/*
+ * Define table of divisors for Rev A EdgePort/4 hardware
+ * These assume a 3.6864MHz crystal, the standard /16, and
+ * MCR.7 = 0.
+ */
+
+static const struct divisor_table_entry divisor_table[] = {
+	{   50,		4608},
+	{   75,		3072},
+	{   110,	2095},	/* 2094.545455 => 230450   => .0217 % over */
+	{   134,	1713},	/* 1713.011152 => 230398.5 => .00065% under */
+	{   150,	1536},
+	{   300,	768},
+	{   600,	384},
+	{   1200,	192},
+	{   1800,	128},
+	{   2400,	96},
+	{   4800,	48},
+	{   7200,	32},
+	{   9600,	24},
+	{   14400,	16},
+	{   19200,	12},
+	{   38400,	6},
+	{   57600,	4},
+	{   115200,	2},
+	{   230400,	1},
+};
+
+/* Number of outstanding Command Write Urbs */
+static atomic_t CmdUrbs = ATOMIC_INIT(0);
+
+
+/* function prototypes */
+
+static void edge_close(struct usb_serial_port *port);
+
+static void  process_rcvd_data(struct edgeport_serial *edge_serial,
+				unsigned char *buffer, __u16 bufferLength);
+static void process_rcvd_status(struct edgeport_serial *edge_serial,
+				__u8 byte2, __u8 byte3);
+static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data,
+		int length);
+static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr);
+static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
+				__u8 lsr, __u8 data);
+static int  send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command,
+				__u8 param);
+static int  calc_baud_rate_divisor(struct device *dev, int baud_rate, int *divisor);
+static void change_port_settings(struct tty_struct *tty,
+				struct edgeport_port *edge_port,
+				const struct ktermios *old_termios);
+static int  send_cmd_write_uart_register(struct edgeport_port *edge_port,
+				__u8 regNum, __u8 regValue);
+static int  write_cmd_usb(struct edgeport_port *edge_port,
+				unsigned char *buffer, int writeLength);
+static void send_more_port_data(struct edgeport_serial *edge_serial,
+				struct edgeport_port *edge_port);
+
+static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
+					__u16 length, const __u8 *data);
+
+/* ************************************************************************ */
+/* ************************************************************************ */
+/* ************************************************************************ */
+/* ************************************************************************ */
+
+/************************************************************************
+ *									*
+ * update_edgeport_E2PROM()	Compare current versions of		*
+ *				Boot ROM and Manufacture 		*
+ *				Descriptors with versions		*
+ *				embedded in this driver			*
+ *									*
+ ************************************************************************/
+static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial)
+{
+	struct device *dev = &edge_serial->serial->dev->dev;
+	__u32 BootCurVer;
+	__u32 BootNewVer;
+	__u8 BootMajorVersion;
+	__u8 BootMinorVersion;
+	__u16 BootBuildNumber;
+	__u32 Bootaddr;
+	const struct ihex_binrec *rec;
+	const struct firmware *fw;
+	const char *fw_name;
+	int response;
+
+	switch (edge_serial->product_info.iDownloadFile) {
+	case EDGE_DOWNLOAD_FILE_I930:
+		fw_name	= "edgeport/boot.fw";
+		break;
+	case EDGE_DOWNLOAD_FILE_80251:
+		fw_name	= "edgeport/boot2.fw";
+		break;
+	default:
+		return;
+	}
+
+	response = request_ihex_firmware(&fw, fw_name,
+					 &edge_serial->serial->dev->dev);
+	if (response) {
+		dev_err(dev, "Failed to load image \"%s\" err %d\n",
+		       fw_name, response);
+		return;
+	}
+
+	rec = (const struct ihex_binrec *)fw->data;
+	BootMajorVersion = rec->data[0];
+	BootMinorVersion = rec->data[1];
+	BootBuildNumber = (rec->data[2] << 8) | rec->data[3];
+
+	/* Check Boot Image Version */
+	BootCurVer = (edge_serial->boot_descriptor.MajorVersion << 24) +
+		     (edge_serial->boot_descriptor.MinorVersion << 16) +
+		      le16_to_cpu(edge_serial->boot_descriptor.BuildNumber);
+
+	BootNewVer = (BootMajorVersion << 24) +
+		     (BootMinorVersion << 16) +
+		      BootBuildNumber;
+
+	dev_dbg(dev, "Current Boot Image version %d.%d.%d\n",
+	    edge_serial->boot_descriptor.MajorVersion,
+	    edge_serial->boot_descriptor.MinorVersion,
+	    le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
+
+
+	if (BootNewVer > BootCurVer) {
+		dev_dbg(dev, "**Update Boot Image from %d.%d.%d to %d.%d.%d\n",
+		    edge_serial->boot_descriptor.MajorVersion,
+		    edge_serial->boot_descriptor.MinorVersion,
+		    le16_to_cpu(edge_serial->boot_descriptor.BuildNumber),
+		    BootMajorVersion, BootMinorVersion, BootBuildNumber);
+
+		dev_dbg(dev, "Downloading new Boot Image\n");
+
+		for (rec = ihex_next_binrec(rec); rec;
+		     rec = ihex_next_binrec(rec)) {
+			Bootaddr = be32_to_cpu(rec->addr);
+			response = rom_write(edge_serial->serial,
+					     Bootaddr >> 16,
+					     Bootaddr & 0xFFFF,
+					     be16_to_cpu(rec->len),
+					     &rec->data[0]);
+			if (response < 0) {
+				dev_err(&edge_serial->serial->dev->dev,
+					"rom_write failed (%x, %x, %d)\n",
+					Bootaddr >> 16, Bootaddr & 0xFFFF,
+					be16_to_cpu(rec->len));
+				break;
+			}
+		}
+	} else {
+		dev_dbg(dev, "Boot Image -- already up to date\n");
+	}
+	release_firmware(fw);
+}
+
+static void dump_product_info(struct edgeport_serial *edge_serial,
+			      struct edgeport_product_info *product_info)
+{
+	struct device *dev = &edge_serial->serial->dev->dev;
+
+	/* Dump Product Info structure */
+	dev_dbg(dev, "**Product Information:\n");
+	dev_dbg(dev, "  ProductId             %x\n", product_info->ProductId);
+	dev_dbg(dev, "  NumPorts              %d\n", product_info->NumPorts);
+	dev_dbg(dev, "  ProdInfoVer           %d\n", product_info->ProdInfoVer);
+	dev_dbg(dev, "  IsServer              %d\n", product_info->IsServer);
+	dev_dbg(dev, "  IsRS232               %d\n", product_info->IsRS232);
+	dev_dbg(dev, "  IsRS422               %d\n", product_info->IsRS422);
+	dev_dbg(dev, "  IsRS485               %d\n", product_info->IsRS485);
+	dev_dbg(dev, "  RomSize               %d\n", product_info->RomSize);
+	dev_dbg(dev, "  RamSize               %d\n", product_info->RamSize);
+	dev_dbg(dev, "  CpuRev                %x\n", product_info->CpuRev);
+	dev_dbg(dev, "  BoardRev              %x\n", product_info->BoardRev);
+	dev_dbg(dev, "  BootMajorVersion      %d.%d.%d\n",
+		product_info->BootMajorVersion,
+		product_info->BootMinorVersion,
+		le16_to_cpu(product_info->BootBuildNumber));
+	dev_dbg(dev, "  FirmwareMajorVersion  %d.%d.%d\n",
+		product_info->FirmwareMajorVersion,
+		product_info->FirmwareMinorVersion,
+		le16_to_cpu(product_info->FirmwareBuildNumber));
+	dev_dbg(dev, "  ManufactureDescDate   %d/%d/%d\n",
+		product_info->ManufactureDescDate[0],
+		product_info->ManufactureDescDate[1],
+		product_info->ManufactureDescDate[2]+1900);
+	dev_dbg(dev, "  iDownloadFile         0x%x\n",
+		product_info->iDownloadFile);
+	dev_dbg(dev, "  EpicVer               %d\n", product_info->EpicVer);
+}
+
+static void get_product_info(struct edgeport_serial *edge_serial)
+{
+	struct edgeport_product_info *product_info = &edge_serial->product_info;
+
+	memset(product_info, 0, sizeof(struct edgeport_product_info));
+
+	product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP);
+	product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts;
+	product_info->ProdInfoVer = 0;
+
+	product_info->RomSize = edge_serial->manuf_descriptor.RomSize;
+	product_info->RamSize = edge_serial->manuf_descriptor.RamSize;
+	product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev;
+	product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev;
+
+	product_info->BootMajorVersion =
+				edge_serial->boot_descriptor.MajorVersion;
+	product_info->BootMinorVersion =
+				edge_serial->boot_descriptor.MinorVersion;
+	product_info->BootBuildNumber =
+				edge_serial->boot_descriptor.BuildNumber;
+
+	memcpy(product_info->ManufactureDescDate,
+			edge_serial->manuf_descriptor.DescDate,
+			sizeof(edge_serial->manuf_descriptor.DescDate));
+
+	/* check if this is 2nd generation hardware */
+	if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct)
+					    & ION_DEVICE_ID_80251_NETCHIP)
+		product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251;
+	else
+		product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930;
+
+	/* Determine Product type and set appropriate flags */
+	switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) {
+	case ION_DEVICE_ID_EDGEPORT_COMPATIBLE:
+	case ION_DEVICE_ID_EDGEPORT_4T:
+	case ION_DEVICE_ID_EDGEPORT_4:
+	case ION_DEVICE_ID_EDGEPORT_2:
+	case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU:
+	case ION_DEVICE_ID_EDGEPORT_8:
+	case ION_DEVICE_ID_EDGEPORT_421:
+	case ION_DEVICE_ID_EDGEPORT_21:
+	case ION_DEVICE_ID_EDGEPORT_2_DIN:
+	case ION_DEVICE_ID_EDGEPORT_4_DIN:
+	case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU:
+		product_info->IsRS232 = 1;
+		break;
+
+	case ION_DEVICE_ID_EDGEPORT_2I:	/* Edgeport/2 RS422/RS485 */
+		product_info->IsRS422 = 1;
+		product_info->IsRS485 = 1;
+		break;
+
+	case ION_DEVICE_ID_EDGEPORT_8I:	/* Edgeport/4 RS422 */
+	case ION_DEVICE_ID_EDGEPORT_4I:	/* Edgeport/4 RS422 */
+		product_info->IsRS422 = 1;
+		break;
+	}
+
+	dump_product_info(edge_serial, product_info);
+}
+
+static int get_epic_descriptor(struct edgeport_serial *ep)
+{
+	int result;
+	struct usb_serial *serial = ep->serial;
+	struct edgeport_product_info *product_info = &ep->product_info;
+	struct edge_compatibility_descriptor *epic;
+	struct edge_compatibility_bits *bits;
+	struct device *dev = &serial->dev->dev;
+
+	ep->is_epic = 0;
+
+	epic = kmalloc(sizeof(*epic), GFP_KERNEL);
+	if (!epic)
+		return -ENOMEM;
+
+	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+				 USB_REQUEST_ION_GET_EPIC_DESC,
+				 0xC0, 0x00, 0x00,
+				 epic, sizeof(*epic),
+				 300);
+	if (result == sizeof(*epic)) {
+		ep->is_epic = 1;
+		memcpy(&ep->epic_descriptor, epic, sizeof(*epic));
+		memset(product_info, 0, sizeof(struct edgeport_product_info));
+
+		product_info->NumPorts = epic->NumPorts;
+		product_info->ProdInfoVer = 0;
+		product_info->FirmwareMajorVersion = epic->MajorVersion;
+		product_info->FirmwareMinorVersion = epic->MinorVersion;
+		product_info->FirmwareBuildNumber = epic->BuildNumber;
+		product_info->iDownloadFile = epic->iDownloadFile;
+		product_info->EpicVer = epic->EpicVer;
+		product_info->Epic = epic->Supports;
+		product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE;
+		dump_product_info(ep, product_info);
+
+		bits = &ep->epic_descriptor.Supports;
+		dev_dbg(dev, "**EPIC descriptor:\n");
+		dev_dbg(dev, "  VendEnableSuspend: %s\n", bits->VendEnableSuspend ? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPOpen         : %s\n", bits->IOSPOpen	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPClose        : %s\n", bits->IOSPClose	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPChase        : %s\n", bits->IOSPChase	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPSetRxFlow    : %s\n", bits->IOSPSetRxFlow	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPSetTxFlow    : %s\n", bits->IOSPSetTxFlow	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPSetXChar     : %s\n", bits->IOSPSetXChar	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPRxCheck      : %s\n", bits->IOSPRxCheck	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPSetClrBreak  : %s\n", bits->IOSPSetClrBreak	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPWriteMCR     : %s\n", bits->IOSPWriteMCR	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPWriteLCR     : %s\n", bits->IOSPWriteLCR	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPSetBaudRate  : %s\n", bits->IOSPSetBaudRate	? "TRUE": "FALSE");
+		dev_dbg(dev, "  TrueEdgeport     : %s\n", bits->TrueEdgeport	? "TRUE": "FALSE");
+
+		result = 0;
+	} else if (result >= 0) {
+		dev_warn(&serial->interface->dev, "short epic descriptor received: %d\n",
+			 result);
+		result = -EIO;
+	}
+
+	kfree(epic);
+
+	return result;
+}
+
+
+/************************************************************************/
+/************************************************************************/
+/*            U S B  C A L L B A C K   F U N C T I O N S                */
+/*            U S B  C A L L B A C K   F U N C T I O N S                */
+/************************************************************************/
+/************************************************************************/
+
+/*****************************************************************************
+ * edge_interrupt_callback
+ *	this is the callback function for when we have received data on the
+ *	interrupt endpoint.
+ *****************************************************************************/
+static void edge_interrupt_callback(struct urb *urb)
+{
+	struct edgeport_serial *edge_serial = urb->context;
+	struct device *dev;
+	struct edgeport_port *edge_port;
+	struct usb_serial_port *port;
+	unsigned char *data = urb->transfer_buffer;
+	int length = urb->actual_length;
+	unsigned long flags;
+	int bytes_avail;
+	int position;
+	int txCredits;
+	int portNumber;
+	int result;
+	int status = urb->status;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status);
+		return;
+	default:
+		dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status);
+		goto exit;
+	}
+
+	dev = &edge_serial->serial->dev->dev;
+
+	/* process this interrupt-read even if there are no ports open */
+	if (length) {
+		usb_serial_debug_data(dev, __func__, length, data);
+
+		if (length > 1) {
+			bytes_avail = data[0] | (data[1] << 8);
+			if (bytes_avail) {
+				spin_lock_irqsave(&edge_serial->es_lock, flags);
+				edge_serial->rxBytesAvail += bytes_avail;
+				dev_dbg(dev,
+					"%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d\n",
+					__func__, bytes_avail,
+					edge_serial->rxBytesAvail,
+					edge_serial->read_in_progress);
+
+				if (edge_serial->rxBytesAvail > 0 &&
+				    !edge_serial->read_in_progress) {
+					dev_dbg(dev, "%s - posting a read\n", __func__);
+					edge_serial->read_in_progress = true;
+
+					/* we have pending bytes on the
+					   bulk in pipe, send a request */
+					result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
+					if (result) {
+						dev_err(dev,
+							"%s - usb_submit_urb(read bulk) failed with result = %d\n",
+							__func__, result);
+						edge_serial->read_in_progress = false;
+					}
+				}
+				spin_unlock_irqrestore(&edge_serial->es_lock,
+						       flags);
+			}
+		}
+		/* grab the txcredits for the ports if available */
+		position = 2;
+		portNumber = 0;
+		while ((position < length - 1) &&
+				(portNumber < edge_serial->serial->num_ports)) {
+			txCredits = data[position] | (data[position+1] << 8);
+			if (txCredits) {
+				port = edge_serial->serial->port[portNumber];
+				edge_port = usb_get_serial_port_data(port);
+				if (edge_port && edge_port->open) {
+					spin_lock_irqsave(&edge_port->ep_lock,
+							  flags);
+					edge_port->txCredits += txCredits;
+					spin_unlock_irqrestore(&edge_port->ep_lock,
+							       flags);
+					dev_dbg(dev, "%s - txcredits for port%d = %d\n",
+						__func__, portNumber,
+						edge_port->txCredits);
+
+					/* tell the tty driver that something
+					   has changed */
+					tty_port_tty_wakeup(&edge_port->port->port);
+					/* Since we have more credit, check
+					   if more data can be sent */
+					send_more_port_data(edge_serial,
+								edge_port);
+				}
+			}
+			position += 2;
+			++portNumber;
+		}
+	}
+
+exit:
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result)
+		dev_err(&urb->dev->dev,
+			"%s - Error %d submitting control urb\n",
+						__func__, result);
+}
+
+
+/*****************************************************************************
+ * edge_bulk_in_callback
+ *	this is the callback function for when we have received data on the
+ *	bulk in endpoint.
+ *****************************************************************************/
+static void edge_bulk_in_callback(struct urb *urb)
+{
+	struct edgeport_serial	*edge_serial = urb->context;
+	struct device *dev;
+	unsigned char		*data = urb->transfer_buffer;
+	int			retval;
+	__u16			raw_data_length;
+	int status = urb->status;
+	unsigned long flags;
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n",
+			__func__, status);
+		edge_serial->read_in_progress = false;
+		return;
+	}
+
+	if (urb->actual_length == 0) {
+		dev_dbg(&urb->dev->dev, "%s - read bulk callback with no data\n", __func__);
+		edge_serial->read_in_progress = false;
+		return;
+	}
+
+	dev = &edge_serial->serial->dev->dev;
+	raw_data_length = urb->actual_length;
+
+	usb_serial_debug_data(dev, __func__, raw_data_length, data);
+
+	spin_lock_irqsave(&edge_serial->es_lock, flags);
+
+	/* decrement our rxBytes available by the number that we just got */
+	edge_serial->rxBytesAvail -= raw_data_length;
+
+	dev_dbg(dev, "%s - Received = %d, rxBytesAvail %d\n", __func__,
+		raw_data_length, edge_serial->rxBytesAvail);
+
+	process_rcvd_data(edge_serial, data, urb->actual_length);
+
+	/* check to see if there's any more data for us to read */
+	if (edge_serial->rxBytesAvail > 0) {
+		dev_dbg(dev, "%s - posting a read\n", __func__);
+		retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
+		if (retval) {
+			dev_err(dev,
+				"%s - usb_submit_urb(read bulk) failed, retval = %d\n",
+				__func__, retval);
+			edge_serial->read_in_progress = false;
+		}
+	} else {
+		edge_serial->read_in_progress = false;
+	}
+
+	spin_unlock_irqrestore(&edge_serial->es_lock, flags);
+}
+
+
+/*****************************************************************************
+ * edge_bulk_out_data_callback
+ *	this is the callback function for when we have finished sending
+ *	serial data on the bulk out endpoint.
+ *****************************************************************************/
+static void edge_bulk_out_data_callback(struct urb *urb)
+{
+	struct edgeport_port *edge_port = urb->context;
+	int status = urb->status;
+
+	if (status) {
+		dev_dbg(&urb->dev->dev,
+			"%s - nonzero write bulk status received: %d\n",
+			__func__, status);
+	}
+
+	if (edge_port->open)
+		tty_port_tty_wakeup(&edge_port->port->port);
+
+	/* Release the Write URB */
+	edge_port->write_in_progress = false;
+
+	/* Check if more data needs to be sent */
+	send_more_port_data((struct edgeport_serial *)
+		(usb_get_serial_data(edge_port->port->serial)), edge_port);
+}
+
+
+/*****************************************************************************
+ * BulkOutCmdCallback
+ *	this is the callback function for when we have finished sending a
+ *	command	on the bulk out endpoint.
+ *****************************************************************************/
+static void edge_bulk_out_cmd_callback(struct urb *urb)
+{
+	struct edgeport_port *edge_port = urb->context;
+	int status = urb->status;
+
+	atomic_dec(&CmdUrbs);
+	dev_dbg(&urb->dev->dev, "%s - FREE URB %p (outstanding %d)\n",
+		__func__, urb, atomic_read(&CmdUrbs));
+
+
+	/* clean up the transfer buffer */
+	kfree(urb->transfer_buffer);
+
+	/* Free the command urb */
+	usb_free_urb(urb);
+
+	if (status) {
+		dev_dbg(&urb->dev->dev,
+			"%s - nonzero write bulk status received: %d\n",
+			__func__, status);
+		return;
+	}
+
+	/* tell the tty driver that something has changed */
+	if (edge_port->open)
+		tty_port_tty_wakeup(&edge_port->port->port);
+
+	/* we have completed the command */
+	edge_port->commandPending = false;
+	wake_up(&edge_port->wait_command);
+}
+
+
+/*****************************************************************************
+ * Driver tty interface functions
+ *****************************************************************************/
+
+/*****************************************************************************
+ * SerialOpen
+ *	this function is called by the tty driver when a port is opened
+ *	If successful, we return 0
+ *	Otherwise we return a negative error number.
+ *****************************************************************************/
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	struct device *dev = &port->dev;
+	struct usb_serial *serial;
+	struct edgeport_serial *edge_serial;
+	int response;
+
+	if (edge_port == NULL)
+		return -ENODEV;
+
+	/* see if we've set up our endpoint info yet (can't set it up
+	   in edge_startup as the structures were not set up at that time.) */
+	serial = port->serial;
+	edge_serial = usb_get_serial_data(serial);
+	if (edge_serial == NULL)
+		return -ENODEV;
+	if (edge_serial->interrupt_in_buffer == NULL) {
+		struct usb_serial_port *port0 = serial->port[0];
+
+		/* not set up yet, so do it now */
+		edge_serial->interrupt_in_buffer =
+					port0->interrupt_in_buffer;
+		edge_serial->interrupt_in_endpoint =
+					port0->interrupt_in_endpointAddress;
+		edge_serial->interrupt_read_urb = port0->interrupt_in_urb;
+		edge_serial->bulk_in_buffer = port0->bulk_in_buffer;
+		edge_serial->bulk_in_endpoint =
+					port0->bulk_in_endpointAddress;
+		edge_serial->read_urb = port0->read_urb;
+		edge_serial->bulk_out_endpoint =
+					port0->bulk_out_endpointAddress;
+
+		/* set up our interrupt urb */
+		usb_fill_int_urb(edge_serial->interrupt_read_urb,
+		      serial->dev,
+		      usb_rcvintpipe(serial->dev,
+				port0->interrupt_in_endpointAddress),
+		      port0->interrupt_in_buffer,
+		      edge_serial->interrupt_read_urb->transfer_buffer_length,
+		      edge_interrupt_callback, edge_serial,
+		      edge_serial->interrupt_read_urb->interval);
+
+		/* set up our bulk in urb */
+		usb_fill_bulk_urb(edge_serial->read_urb, serial->dev,
+			usb_rcvbulkpipe(serial->dev,
+				port0->bulk_in_endpointAddress),
+			port0->bulk_in_buffer,
+			edge_serial->read_urb->transfer_buffer_length,
+			edge_bulk_in_callback, edge_serial);
+		edge_serial->read_in_progress = false;
+
+		/* start interrupt read for this edgeport
+		 * this interrupt will continue as long
+		 * as the edgeport is connected */
+		response = usb_submit_urb(edge_serial->interrupt_read_urb,
+								GFP_KERNEL);
+		if (response) {
+			dev_err(dev, "%s - Error %d submitting control urb\n",
+				__func__, response);
+		}
+	}
+
+	/* initialize our wait queues */
+	init_waitqueue_head(&edge_port->wait_open);
+	init_waitqueue_head(&edge_port->wait_chase);
+	init_waitqueue_head(&edge_port->wait_command);
+
+	/* initialize our port settings */
+	edge_port->txCredits = 0;	/* Can't send any data yet */
+	/* Must always set this bit to enable ints! */
+	edge_port->shadowMCR = MCR_MASTER_IE;
+	edge_port->chaseResponsePending = false;
+
+	/* send a open port command */
+	edge_port->openPending = true;
+	edge_port->open        = false;
+	response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0);
+
+	if (response < 0) {
+		dev_err(dev, "%s - error sending open port command\n", __func__);
+		edge_port->openPending = false;
+		return -ENODEV;
+	}
+
+	/* now wait for the port to be completely opened */
+	wait_event_timeout(edge_port->wait_open, !edge_port->openPending,
+								OPEN_TIMEOUT);
+
+	if (!edge_port->open) {
+		/* open timed out */
+		dev_dbg(dev, "%s - open timeout\n", __func__);
+		edge_port->openPending = false;
+		return -ENODEV;
+	}
+
+	/* create the txfifo */
+	edge_port->txfifo.head	= 0;
+	edge_port->txfifo.tail	= 0;
+	edge_port->txfifo.count	= 0;
+	edge_port->txfifo.size	= edge_port->maxTxCredits;
+	edge_port->txfifo.fifo	= kmalloc(edge_port->maxTxCredits, GFP_KERNEL);
+
+	if (!edge_port->txfifo.fifo) {
+		edge_close(port);
+		return -ENOMEM;
+	}
+
+	/* Allocate a URB for the write */
+	edge_port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
+	edge_port->write_in_progress = false;
+
+	if (!edge_port->write_urb) {
+		edge_close(port);
+		return -ENOMEM;
+	}
+
+	dev_dbg(dev, "%s - Initialize TX fifo to %d bytes\n",
+		__func__, edge_port->maxTxCredits);
+
+	return 0;
+}
+
+
+/************************************************************************
+ *
+ * block_until_chase_response
+ *
+ *	This function will block the close until one of the following:
+ *		1. Response to our Chase comes from Edgeport
+ *		2. A timeout of 10 seconds without activity has expired
+ *		   (1K of Edgeport data @ 2400 baud ==> 4 sec to empty)
+ *
+ ************************************************************************/
+static void block_until_chase_response(struct edgeport_port *edge_port)
+{
+	struct device *dev = &edge_port->port->dev;
+	DEFINE_WAIT(wait);
+	__u16 lastCredits;
+	int timeout = 1*HZ;
+	int loop = 10;
+
+	while (1) {
+		/* Save Last credits */
+		lastCredits = edge_port->txCredits;
+
+		/* Did we get our Chase response */
+		if (!edge_port->chaseResponsePending) {
+			dev_dbg(dev, "%s - Got Chase Response\n", __func__);
+
+			/* did we get all of our credit back? */
+			if (edge_port->txCredits == edge_port->maxTxCredits) {
+				dev_dbg(dev, "%s - Got all credits\n", __func__);
+				return;
+			}
+		}
+
+		/* Block the thread for a while */
+		prepare_to_wait(&edge_port->wait_chase, &wait,
+						TASK_UNINTERRUPTIBLE);
+		schedule_timeout(timeout);
+		finish_wait(&edge_port->wait_chase, &wait);
+
+		if (lastCredits == edge_port->txCredits) {
+			/* No activity.. count down. */
+			loop--;
+			if (loop == 0) {
+				edge_port->chaseResponsePending = false;
+				dev_dbg(dev, "%s - Chase TIMEOUT\n", __func__);
+				return;
+			}
+		} else {
+			/* Reset timeout value back to 10 seconds */
+			dev_dbg(dev, "%s - Last %d, Current %d\n", __func__,
+					lastCredits, edge_port->txCredits);
+			loop = 10;
+		}
+	}
+}
+
+
+/************************************************************************
+ *
+ * block_until_tx_empty
+ *
+ *	This function will block the close until one of the following:
+ *		1. TX count are 0
+ *		2. The edgeport has stopped
+ *		3. A timeout of 3 seconds without activity has expired
+ *
+ ************************************************************************/
+static void block_until_tx_empty(struct edgeport_port *edge_port)
+{
+	struct device *dev = &edge_port->port->dev;
+	DEFINE_WAIT(wait);
+	struct TxFifo *fifo = &edge_port->txfifo;
+	__u32 lastCount;
+	int timeout = HZ/10;
+	int loop = 30;
+
+	while (1) {
+		/* Save Last count */
+		lastCount = fifo->count;
+
+		/* Is the Edgeport Buffer empty? */
+		if (lastCount == 0) {
+			dev_dbg(dev, "%s - TX Buffer Empty\n", __func__);
+			return;
+		}
+
+		/* Block the thread for a while */
+		prepare_to_wait(&edge_port->wait_chase, &wait,
+						TASK_UNINTERRUPTIBLE);
+		schedule_timeout(timeout);
+		finish_wait(&edge_port->wait_chase, &wait);
+
+		dev_dbg(dev, "%s wait\n", __func__);
+
+		if (lastCount == fifo->count) {
+			/* No activity.. count down. */
+			loop--;
+			if (loop == 0) {
+				dev_dbg(dev, "%s - TIMEOUT\n", __func__);
+				return;
+			}
+		} else {
+			/* Reset timeout value back to seconds */
+			loop = 30;
+		}
+	}
+}
+
+
+/*****************************************************************************
+ * edge_close
+ *	this function is called by the tty driver when a port is closed
+ *****************************************************************************/
+static void edge_close(struct usb_serial_port *port)
+{
+	struct edgeport_serial *edge_serial;
+	struct edgeport_port *edge_port;
+	int status;
+
+	edge_serial = usb_get_serial_data(port->serial);
+	edge_port = usb_get_serial_port_data(port);
+	if (edge_serial == NULL || edge_port == NULL)
+		return;
+
+	/* block until tx is empty */
+	block_until_tx_empty(edge_port);
+
+	edge_port->closePending = true;
+
+	if (!edge_serial->is_epic ||
+	    edge_serial->epic_descriptor.Supports.IOSPChase) {
+		/* flush and chase */
+		edge_port->chaseResponsePending = true;
+
+		dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__);
+		status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
+		if (status == 0)
+			/* block until chase finished */
+			block_until_chase_response(edge_port);
+		else
+			edge_port->chaseResponsePending = false;
+	}
+
+	if (!edge_serial->is_epic ||
+	    edge_serial->epic_descriptor.Supports.IOSPClose) {
+	       /* close the port */
+		dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLOSE_PORT\n", __func__);
+		send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0);
+	}
+
+	/* port->close = true; */
+	edge_port->closePending = false;
+	edge_port->open = false;
+	edge_port->openPending = false;
+
+	usb_kill_urb(edge_port->write_urb);
+
+	if (edge_port->write_urb) {
+		/* if this urb had a transfer buffer already
+				(old transfer) free it */
+		kfree(edge_port->write_urb->transfer_buffer);
+		usb_free_urb(edge_port->write_urb);
+		edge_port->write_urb = NULL;
+	}
+	kfree(edge_port->txfifo.fifo);
+	edge_port->txfifo.fifo = NULL;
+}
+
+/*****************************************************************************
+ * SerialWrite
+ *	this function is called by the tty driver when data should be written
+ *	to the port.
+ *	If successful, we return the number of bytes written, otherwise we
+ *	return a negative error number.
+ *****************************************************************************/
+static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *data, int count)
+{
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	struct TxFifo *fifo;
+	int copySize;
+	int bytesleft;
+	int firsthalf;
+	int secondhalf;
+	unsigned long flags;
+
+	if (edge_port == NULL)
+		return -ENODEV;
+
+	/* get a pointer to the Tx fifo */
+	fifo = &edge_port->txfifo;
+
+	spin_lock_irqsave(&edge_port->ep_lock, flags);
+
+	/* calculate number of bytes to put in fifo */
+	copySize = min((unsigned int)count,
+				(edge_port->txCredits - fifo->count));
+
+	dev_dbg(&port->dev, "%s of %d byte(s) Fifo room  %d -- will copy %d bytes\n",
+		__func__, count, edge_port->txCredits - fifo->count, copySize);
+
+	/* catch writes of 0 bytes which the tty driver likes to give us,
+	   and when txCredits is empty */
+	if (copySize == 0) {
+		dev_dbg(&port->dev, "%s - copySize = Zero\n", __func__);
+		goto finish_write;
+	}
+
+	/* queue the data
+	 * since we can never overflow the buffer we do not have to check for a
+	 * full condition
+	 *
+	 * the copy is done is two parts -- first fill to the end of the buffer
+	 * then copy the reset from the start of the buffer
+	 */
+	bytesleft = fifo->size - fifo->head;
+	firsthalf = min(bytesleft, copySize);
+	dev_dbg(&port->dev, "%s - copy %d bytes of %d into fifo \n", __func__,
+		firsthalf, bytesleft);
+
+	/* now copy our data */
+	memcpy(&fifo->fifo[fifo->head], data, firsthalf);
+	usb_serial_debug_data(&port->dev, __func__, firsthalf, &fifo->fifo[fifo->head]);
+
+	/* update the index and size */
+	fifo->head  += firsthalf;
+	fifo->count += firsthalf;
+
+	/* wrap the index */
+	if (fifo->head == fifo->size)
+		fifo->head = 0;
+
+	secondhalf = copySize-firsthalf;
+
+	if (secondhalf) {
+		dev_dbg(&port->dev, "%s - copy rest of data %d\n", __func__, secondhalf);
+		memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf);
+		usb_serial_debug_data(&port->dev, __func__, secondhalf, &fifo->fifo[fifo->head]);
+		/* update the index and size */
+		fifo->count += secondhalf;
+		fifo->head  += secondhalf;
+		/* No need to check for wrap since we can not get to end of
+		 * the fifo in this part
+		 */
+	}
+
+finish_write:
+	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+
+	send_more_port_data((struct edgeport_serial *)
+			usb_get_serial_data(port->serial), edge_port);
+
+	dev_dbg(&port->dev, "%s wrote %d byte(s) TxCredits %d, Fifo %d\n",
+		__func__, copySize, edge_port->txCredits, fifo->count);
+
+	return copySize;
+}
+
+
+/************************************************************************
+ *
+ * send_more_port_data()
+ *
+ *	This routine attempts to write additional UART transmit data
+ *	to a port over the USB bulk pipe. It is called (1) when new
+ *	data has been written to a port's TxBuffer from higher layers
+ *	(2) when the peripheral sends us additional TxCredits indicating
+ *	that it can accept more	Tx data for a given port; and (3) when
+ *	a bulk write completes successfully and we want to see if we
+ *	can transmit more.
+ *
+ ************************************************************************/
+static void send_more_port_data(struct edgeport_serial *edge_serial,
+					struct edgeport_port *edge_port)
+{
+	struct TxFifo	*fifo = &edge_port->txfifo;
+	struct device	*dev = &edge_port->port->dev;
+	struct urb	*urb;
+	unsigned char	*buffer;
+	int		status;
+	int		count;
+	int		bytesleft;
+	int		firsthalf;
+	int		secondhalf;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&edge_port->ep_lock, flags);
+
+	if (edge_port->write_in_progress ||
+	    !edge_port->open             ||
+	    (fifo->count == 0)) {
+		dev_dbg(dev, "%s EXIT - fifo %d, PendingWrite = %d\n",
+			__func__, fifo->count, edge_port->write_in_progress);
+		goto exit_send;
+	}
+
+	/* since the amount of data in the fifo will always fit into the
+	 * edgeport buffer we do not need to check the write length
+	 *
+	 * Do we have enough credits for this port to make it worthwhile
+	 * to bother queueing a write. If it's too small, say a few bytes,
+	 * it's better to wait for more credits so we can do a larger write.
+	 */
+	if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) {
+		dev_dbg(dev, "%s Not enough credit - fifo %d TxCredit %d\n",
+			__func__, fifo->count, edge_port->txCredits);
+		goto exit_send;
+	}
+
+	/* lock this write */
+	edge_port->write_in_progress = true;
+
+	/* get a pointer to the write_urb */
+	urb = edge_port->write_urb;
+
+	/* make sure transfer buffer is freed */
+	kfree(urb->transfer_buffer);
+	urb->transfer_buffer = NULL;
+
+	/* build the data header for the buffer and port that we are about
+	   to send out */
+	count = fifo->count;
+	buffer = kmalloc(count+2, GFP_ATOMIC);
+	if (!buffer) {
+		edge_port->write_in_progress = false;
+		goto exit_send;
+	}
+	buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->port_number, count);
+	buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->port_number, count);
+
+	/* now copy our data */
+	bytesleft =  fifo->size - fifo->tail;
+	firsthalf = min(bytesleft, count);
+	memcpy(&buffer[2], &fifo->fifo[fifo->tail], firsthalf);
+	fifo->tail  += firsthalf;
+	fifo->count -= firsthalf;
+	if (fifo->tail == fifo->size)
+		fifo->tail = 0;
+
+	secondhalf = count-firsthalf;
+	if (secondhalf) {
+		memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail],
+								secondhalf);
+		fifo->tail  += secondhalf;
+		fifo->count -= secondhalf;
+	}
+
+	if (count)
+		usb_serial_debug_data(&edge_port->port->dev, __func__, count, &buffer[2]);
+
+	/* fill up the urb with all of our data and submit it */
+	usb_fill_bulk_urb(urb, edge_serial->serial->dev,
+			usb_sndbulkpipe(edge_serial->serial->dev,
+					edge_serial->bulk_out_endpoint),
+			buffer, count+2,
+			edge_bulk_out_data_callback, edge_port);
+
+	/* decrement the number of credits we have by the number we just sent */
+	edge_port->txCredits -= count;
+	edge_port->port->icount.tx += count;
+
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status) {
+		/* something went wrong */
+		dev_err_console(edge_port->port,
+			"%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n",
+				__func__, status);
+		edge_port->write_in_progress = false;
+
+		/* revert the credits as something bad happened. */
+		edge_port->txCredits += count;
+		edge_port->port->icount.tx -= count;
+	}
+	dev_dbg(dev, "%s wrote %d byte(s) TxCredit %d, Fifo %d\n",
+		__func__, count, edge_port->txCredits, fifo->count);
+
+exit_send:
+	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+}
+
+
+/*****************************************************************************
+ * edge_write_room
+ *	this function is called by the tty driver when it wants to know how
+ *	many bytes of data we can accept for a specific port.
+ *****************************************************************************/
+static unsigned int edge_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	unsigned int room;
+	unsigned long flags;
+
+	/* total of both buffers is still txCredit */
+	spin_lock_irqsave(&edge_port->ep_lock, flags);
+	room = edge_port->txCredits - edge_port->txfifo.count;
+	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+
+	dev_dbg(&port->dev, "%s - returns %u\n", __func__, room);
+	return room;
+}
+
+
+/*****************************************************************************
+ * edge_chars_in_buffer
+ *	this function is called by the tty driver when it wants to know how
+ *	many bytes of data we currently have outstanding in the port (data that
+ *	has been written, but hasn't made it out the port yet)
+ *****************************************************************************/
+static unsigned int edge_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	unsigned int num_chars;
+	unsigned long flags;
+
+	spin_lock_irqsave(&edge_port->ep_lock, flags);
+	num_chars = edge_port->maxTxCredits - edge_port->txCredits +
+						edge_port->txfifo.count;
+	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+	if (num_chars) {
+		dev_dbg(&port->dev, "%s - returns %u\n", __func__, num_chars);
+	}
+
+	return num_chars;
+}
+
+
+/*****************************************************************************
+ * SerialThrottle
+ *	this function is called by the tty driver when it wants to stop the data
+ *	being read from the port.
+ *****************************************************************************/
+static void edge_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	int status;
+
+	if (edge_port == NULL)
+		return;
+
+	if (!edge_port->open) {
+		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
+		return;
+	}
+
+	/* if we are implementing XON/XOFF, send the stop character */
+	if (I_IXOFF(tty)) {
+		unsigned char stop_char = STOP_CHAR(tty);
+		status = edge_write(tty, port, &stop_char, 1);
+		if (status <= 0)
+			return;
+	}
+
+	/* if we are implementing RTS/CTS, toggle that line */
+	if (C_CRTSCTS(tty)) {
+		edge_port->shadowMCR &= ~MCR_RTS;
+		status = send_cmd_write_uart_register(edge_port, MCR,
+							edge_port->shadowMCR);
+		if (status != 0)
+			return;
+	}
+}
+
+
+/*****************************************************************************
+ * edge_unthrottle
+ *	this function is called by the tty driver when it wants to resume the
+ *	data being read from the port (called after SerialThrottle is called)
+ *****************************************************************************/
+static void edge_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	int status;
+
+	if (edge_port == NULL)
+		return;
+
+	if (!edge_port->open) {
+		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
+		return;
+	}
+
+	/* if we are implementing XON/XOFF, send the start character */
+	if (I_IXOFF(tty)) {
+		unsigned char start_char = START_CHAR(tty);
+		status = edge_write(tty, port, &start_char, 1);
+		if (status <= 0)
+			return;
+	}
+	/* if we are implementing RTS/CTS, toggle that line */
+	if (C_CRTSCTS(tty)) {
+		edge_port->shadowMCR |= MCR_RTS;
+		send_cmd_write_uart_register(edge_port, MCR,
+						edge_port->shadowMCR);
+	}
+}
+
+
+/*****************************************************************************
+ * SerialSetTermios
+ *	this function is called by the tty driver when it wants to change
+ * the termios structure
+ *****************************************************************************/
+static void edge_set_termios(struct tty_struct *tty,
+			     struct usb_serial_port *port,
+			     const struct ktermios *old_termios)
+{
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+
+	if (edge_port == NULL)
+		return;
+
+	if (!edge_port->open) {
+		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
+		return;
+	}
+
+	/* change the port settings to the new ones specified */
+	change_port_settings(tty, edge_port, old_termios);
+}
+
+
+/*****************************************************************************
+ * get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * 	    is emptied.  On bus types like RS485, the transmitter must
+ * 	    release the bus after transmitting. This must be done when
+ * 	    the transmit shift register is empty, not be done when the
+ * 	    transmit holding register is empty.  This functionality
+ * 	    allows an RS485 driver to be written in user space.
+ *****************************************************************************/
+static int get_lsr_info(struct edgeport_port *edge_port,
+						unsigned int __user *value)
+{
+	unsigned int result = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&edge_port->ep_lock, flags);
+	if (edge_port->maxTxCredits == edge_port->txCredits &&
+	    edge_port->txfifo.count == 0) {
+		dev_dbg(&edge_port->port->dev, "%s -- Empty\n", __func__);
+		result = TIOCSER_TEMT;
+	}
+	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+
+	if (copy_to_user(value, &result, sizeof(int)))
+		return -EFAULT;
+	return 0;
+}
+
+static int edge_tiocmset(struct tty_struct *tty,
+					unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	unsigned int mcr;
+
+	mcr = edge_port->shadowMCR;
+	if (set & TIOCM_RTS)
+		mcr |= MCR_RTS;
+	if (set & TIOCM_DTR)
+		mcr |= MCR_DTR;
+	if (set & TIOCM_LOOP)
+		mcr |= MCR_LOOPBACK;
+
+	if (clear & TIOCM_RTS)
+		mcr &= ~MCR_RTS;
+	if (clear & TIOCM_DTR)
+		mcr &= ~MCR_DTR;
+	if (clear & TIOCM_LOOP)
+		mcr &= ~MCR_LOOPBACK;
+
+	edge_port->shadowMCR = mcr;
+
+	send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
+
+	return 0;
+}
+
+static int edge_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	unsigned int result = 0;
+	unsigned int msr;
+	unsigned int mcr;
+
+	msr = edge_port->shadowMSR;
+	mcr = edge_port->shadowMCR;
+	result = ((mcr & MCR_DTR)	? TIOCM_DTR: 0)	  /* 0x002 */
+		  | ((mcr & MCR_RTS)	? TIOCM_RTS: 0)   /* 0x004 */
+		  | ((msr & EDGEPORT_MSR_CTS)	? TIOCM_CTS: 0)   /* 0x020 */
+		  | ((msr & EDGEPORT_MSR_CD)	? TIOCM_CAR: 0)   /* 0x040 */
+		  | ((msr & EDGEPORT_MSR_RI)	? TIOCM_RI:  0)   /* 0x080 */
+		  | ((msr & EDGEPORT_MSR_DSR)	? TIOCM_DSR: 0);  /* 0x100 */
+
+	return result;
+}
+
+/*****************************************************************************
+ * SerialIoctl
+ *	this function handles any ioctl calls to the driver
+ *****************************************************************************/
+static int edge_ioctl(struct tty_struct *tty,
+					unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+
+	switch (cmd) {
+	case TIOCSERGETLSR:
+		dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__);
+		return get_lsr_info(edge_port, (unsigned int __user *) arg);
+	}
+	return -ENOIOCTLCMD;
+}
+
+
+/*****************************************************************************
+ * SerialBreak
+ *	this function sends a break to the port
+ *****************************************************************************/
+static void edge_break(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial);
+	int status;
+
+	if (!edge_serial->is_epic ||
+	    edge_serial->epic_descriptor.Supports.IOSPChase) {
+		/* flush and chase */
+		edge_port->chaseResponsePending = true;
+
+		dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__);
+		status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
+		if (status == 0) {
+			/* block until chase finished */
+			block_until_chase_response(edge_port);
+		} else {
+			edge_port->chaseResponsePending = false;
+		}
+	}
+
+	if (!edge_serial->is_epic ||
+	    edge_serial->epic_descriptor.Supports.IOSPSetClrBreak) {
+		if (break_state == -1) {
+			dev_dbg(&port->dev, "%s - Sending IOSP_CMD_SET_BREAK\n", __func__);
+			status = send_iosp_ext_cmd(edge_port,
+						IOSP_CMD_SET_BREAK, 0);
+		} else {
+			dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLEAR_BREAK\n", __func__);
+			status = send_iosp_ext_cmd(edge_port,
+						IOSP_CMD_CLEAR_BREAK, 0);
+		}
+		if (status)
+			dev_dbg(&port->dev, "%s - error sending break set/clear command.\n",
+				__func__);
+	}
+}
+
+
+/*****************************************************************************
+ * process_rcvd_data
+ *	this function handles the data received on the bulk in pipe.
+ *****************************************************************************/
+static void process_rcvd_data(struct edgeport_serial *edge_serial,
+				unsigned char *buffer, __u16 bufferLength)
+{
+	struct usb_serial *serial = edge_serial->serial;
+	struct device *dev = &serial->dev->dev;
+	struct usb_serial_port *port;
+	struct edgeport_port *edge_port;
+	__u16 lastBufferLength;
+	__u16 rxLen;
+
+	lastBufferLength = bufferLength + 1;
+
+	while (bufferLength > 0) {
+		/* failsafe incase we get a message that we don't understand */
+		if (lastBufferLength == bufferLength) {
+			dev_dbg(dev, "%s - stuck in loop, exiting it.\n", __func__);
+			break;
+		}
+		lastBufferLength = bufferLength;
+
+		switch (edge_serial->rxState) {
+		case EXPECT_HDR1:
+			edge_serial->rxHeader1 = *buffer;
+			++buffer;
+			--bufferLength;
+
+			if (bufferLength == 0) {
+				edge_serial->rxState = EXPECT_HDR2;
+				break;
+			}
+			fallthrough;
+		case EXPECT_HDR2:
+			edge_serial->rxHeader2 = *buffer;
+			++buffer;
+			--bufferLength;
+
+			dev_dbg(dev, "%s - Hdr1=%02X Hdr2=%02X\n", __func__,
+				edge_serial->rxHeader1, edge_serial->rxHeader2);
+			/* Process depending on whether this header is
+			 * data or status */
+
+			if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) {
+				/* Decode this status header and go to
+				 * EXPECT_HDR1 (if we can process the status
+				 * with only 2 bytes), or go to EXPECT_HDR3 to
+				 * get the third byte. */
+				edge_serial->rxPort =
+				    IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
+				edge_serial->rxStatusCode =
+				    IOSP_GET_STATUS_CODE(
+						edge_serial->rxHeader1);
+
+				if (!IOSP_STATUS_IS_2BYTE(
+						edge_serial->rxStatusCode)) {
+					/* This status needs additional bytes.
+					 * Save what we have and then wait for
+					 * more data.
+					 */
+					edge_serial->rxStatusParam
+						= edge_serial->rxHeader2;
+					edge_serial->rxState = EXPECT_HDR3;
+					break;
+				}
+				/* We have all the header bytes, process the
+				   status now */
+				process_rcvd_status(edge_serial,
+						edge_serial->rxHeader2, 0);
+				edge_serial->rxState = EXPECT_HDR1;
+				break;
+			}
+
+			edge_serial->rxPort = IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
+			edge_serial->rxBytesRemaining = IOSP_GET_HDR_DATA_LEN(edge_serial->rxHeader1,
+									      edge_serial->rxHeader2);
+			dev_dbg(dev, "%s - Data for Port %u Len %u\n", __func__,
+				edge_serial->rxPort,
+				edge_serial->rxBytesRemaining);
+
+			if (bufferLength == 0) {
+				edge_serial->rxState = EXPECT_DATA;
+				break;
+			}
+			fallthrough;
+		case EXPECT_DATA: /* Expect data */
+			if (bufferLength < edge_serial->rxBytesRemaining) {
+				rxLen = bufferLength;
+				/* Expect data to start next buffer */
+				edge_serial->rxState = EXPECT_DATA;
+			} else {
+				/* BufLen >= RxBytesRemaining */
+				rxLen = edge_serial->rxBytesRemaining;
+				/* Start another header next time */
+				edge_serial->rxState = EXPECT_HDR1;
+			}
+
+			bufferLength -= rxLen;
+			edge_serial->rxBytesRemaining -= rxLen;
+
+			/* spit this data back into the tty driver if this
+			   port is open */
+			if (rxLen && edge_serial->rxPort < serial->num_ports) {
+				port = serial->port[edge_serial->rxPort];
+				edge_port = usb_get_serial_port_data(port);
+				if (edge_port && edge_port->open) {
+					dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n",
+						__func__, rxLen,
+						edge_serial->rxPort);
+					edge_tty_recv(edge_port->port, buffer,
+							rxLen);
+					edge_port->port->icount.rx += rxLen;
+				}
+			}
+			buffer += rxLen;
+			break;
+
+		case EXPECT_HDR3:	/* Expect 3rd byte of status header */
+			edge_serial->rxHeader3 = *buffer;
+			++buffer;
+			--bufferLength;
+
+			/* We have all the header bytes, process the
+			   status now */
+			process_rcvd_status(edge_serial,
+				edge_serial->rxStatusParam,
+				edge_serial->rxHeader3);
+			edge_serial->rxState = EXPECT_HDR1;
+			break;
+		}
+	}
+}
+
+
+/*****************************************************************************
+ * process_rcvd_status
+ *	this function handles the any status messages received on the
+ *	bulk in pipe.
+ *****************************************************************************/
+static void process_rcvd_status(struct edgeport_serial *edge_serial,
+						__u8 byte2, __u8 byte3)
+{
+	struct usb_serial_port *port;
+	struct edgeport_port *edge_port;
+	struct tty_struct *tty;
+	struct device *dev;
+	__u8 code = edge_serial->rxStatusCode;
+
+	/* switch the port pointer to the one being currently talked about */
+	if (edge_serial->rxPort >= edge_serial->serial->num_ports)
+		return;
+	port = edge_serial->serial->port[edge_serial->rxPort];
+	edge_port = usb_get_serial_port_data(port);
+	if (edge_port == NULL) {
+		dev_err(&edge_serial->serial->dev->dev,
+			"%s - edge_port == NULL for port %d\n",
+					__func__, edge_serial->rxPort);
+		return;
+	}
+	dev = &port->dev;
+
+	if (code == IOSP_EXT_STATUS) {
+		switch (byte2) {
+		case IOSP_EXT_STATUS_CHASE_RSP:
+			/* we want to do EXT status regardless of port
+			 * open/closed */
+			dev_dbg(dev, "%s - Port %u EXT CHASE_RSP Data = %02x\n",
+				__func__, edge_serial->rxPort, byte3);
+			/* Currently, the only EXT_STATUS is Chase, so process
+			 * here instead of one more call to one more subroutine
+			 * If/when more EXT_STATUS, there'll be more work to do
+			 * Also, we currently clear flag and close the port
+			 * regardless of content of above's Byte3.
+			 * We could choose to do something else when Byte3 says
+			 * Timeout on Chase from Edgeport, like wait longer in
+			 * block_until_chase_response, but for now we don't.
+			 */
+			edge_port->chaseResponsePending = false;
+			wake_up(&edge_port->wait_chase);
+			return;
+
+		case IOSP_EXT_STATUS_RX_CHECK_RSP:
+			dev_dbg(dev, "%s ========== Port %u CHECK_RSP Sequence = %02x =============\n",
+				__func__, edge_serial->rxPort, byte3);
+			/* Port->RxCheckRsp = true; */
+			return;
+		}
+	}
+
+	if (code == IOSP_STATUS_OPEN_RSP) {
+		edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
+		edge_port->maxTxCredits = edge_port->txCredits;
+		dev_dbg(dev, "%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d\n",
+			__func__, edge_serial->rxPort, byte2, edge_port->txCredits);
+		handle_new_msr(edge_port, byte2);
+
+		/* send the current line settings to the port so we are
+		   in sync with any further termios calls */
+		tty = tty_port_tty_get(&edge_port->port->port);
+		if (tty) {
+			change_port_settings(tty,
+				edge_port, &tty->termios);
+			tty_kref_put(tty);
+		}
+
+		/* we have completed the open */
+		edge_port->openPending = false;
+		edge_port->open = true;
+		wake_up(&edge_port->wait_open);
+		return;
+	}
+
+	/* If port is closed, silently discard all rcvd status. We can
+	 * have cases where buffered status is received AFTER the close
+	 * port command is sent to the Edgeport.
+	 */
+	if (!edge_port->open || edge_port->closePending)
+		return;
+
+	switch (code) {
+	/* Not currently sent by Edgeport */
+	case IOSP_STATUS_LSR:
+		dev_dbg(dev, "%s - Port %u LSR Status = %02x\n",
+			__func__, edge_serial->rxPort, byte2);
+		handle_new_lsr(edge_port, false, byte2, 0);
+		break;
+
+	case IOSP_STATUS_LSR_DATA:
+		dev_dbg(dev, "%s - Port %u LSR Status = %02x, Data = %02x\n",
+			__func__, edge_serial->rxPort, byte2, byte3);
+		/* byte2 is LSR Register */
+		/* byte3 is broken data byte */
+		handle_new_lsr(edge_port, true, byte2, byte3);
+		break;
+	/*
+	 *	case IOSP_EXT_4_STATUS:
+	 *		dev_dbg(dev, "%s - Port %u LSR Status = %02x Data = %02x\n",
+	 *			__func__, edge_serial->rxPort, byte2, byte3);
+	 *		break;
+	 */
+	case IOSP_STATUS_MSR:
+		dev_dbg(dev, "%s - Port %u MSR Status = %02x\n",
+			__func__, edge_serial->rxPort, byte2);
+		/*
+		 * Process this new modem status and generate appropriate
+		 * events, etc, based on the new status. This routine
+		 * also saves the MSR in Port->ShadowMsr.
+		 */
+		handle_new_msr(edge_port, byte2);
+		break;
+
+	default:
+		dev_dbg(dev, "%s - Unrecognized IOSP status code %u\n", __func__, code);
+		break;
+	}
+}
+
+
+/*****************************************************************************
+ * edge_tty_recv
+ *	this function passes data on to the tty flip buffer
+ *****************************************************************************/
+static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data,
+		int length)
+{
+	int cnt;
+
+	cnt = tty_insert_flip_string(&port->port, data, length);
+	if (cnt < length) {
+		dev_err(&port->dev, "%s - dropping data, %d bytes lost\n",
+				__func__, length - cnt);
+	}
+	data += cnt;
+	length -= cnt;
+
+	tty_flip_buffer_push(&port->port);
+}
+
+
+/*****************************************************************************
+ * handle_new_msr
+ *	this function handles any change to the msr register for a port.
+ *****************************************************************************/
+static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr)
+{
+	struct  async_icount *icount;
+
+	if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
+			EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
+		icount = &edge_port->port->icount;
+
+		/* update input line counters */
+		if (newMsr & EDGEPORT_MSR_DELTA_CTS)
+			icount->cts++;
+		if (newMsr & EDGEPORT_MSR_DELTA_DSR)
+			icount->dsr++;
+		if (newMsr & EDGEPORT_MSR_DELTA_CD)
+			icount->dcd++;
+		if (newMsr & EDGEPORT_MSR_DELTA_RI)
+			icount->rng++;
+		wake_up_interruptible(&edge_port->port->port.delta_msr_wait);
+	}
+
+	/* Save the new modem status */
+	edge_port->shadowMSR = newMsr & 0xf0;
+}
+
+
+/*****************************************************************************
+ * handle_new_lsr
+ *	this function handles any change to the lsr register for a port.
+ *****************************************************************************/
+static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
+							__u8 lsr, __u8 data)
+{
+	__u8 newLsr = (__u8) (lsr & (__u8)
+		(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
+	struct async_icount *icount;
+
+	edge_port->shadowLSR = lsr;
+
+	if (newLsr & LSR_BREAK) {
+		/*
+		 * Parity and Framing errors only count if they
+		 * occur exclusive of a break being
+		 * received.
+		 */
+		newLsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
+	}
+
+	/* Place LSR data byte into Rx buffer */
+	if (lsrData)
+		edge_tty_recv(edge_port->port, &data, 1);
+
+	/* update input line counters */
+	icount = &edge_port->port->icount;
+	if (newLsr & LSR_BREAK)
+		icount->brk++;
+	if (newLsr & LSR_OVER_ERR)
+		icount->overrun++;
+	if (newLsr & LSR_PAR_ERR)
+		icount->parity++;
+	if (newLsr & LSR_FRM_ERR)
+		icount->frame++;
+}
+
+
+/****************************************************************************
+ * sram_write
+ *	writes a number of bytes to the Edgeport device's sram starting at the
+ *	given address.
+ *	If successful returns the number of bytes written, otherwise it returns
+ *	a negative error number of the problem.
+ ****************************************************************************/
+static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
+					__u16 length, const __u8 *data)
+{
+	int result;
+	__u16 current_length;
+	unsigned char *transfer_buffer;
+
+	dev_dbg(&serial->dev->dev, "%s - %x, %x, %d\n", __func__, extAddr, addr, length);
+
+	transfer_buffer =  kmalloc(64, GFP_KERNEL);
+	if (!transfer_buffer)
+		return -ENOMEM;
+
+	/* need to split these writes up into 64 byte chunks */
+	result = 0;
+	while (length > 0) {
+		if (length > 64)
+			current_length = 64;
+		else
+			current_length = length;
+
+/*		dev_dbg(&serial->dev->dev, "%s - writing %x, %x, %d\n", __func__, extAddr, addr, current_length); */
+		memcpy(transfer_buffer, data, current_length);
+		result = usb_control_msg(serial->dev,
+					usb_sndctrlpipe(serial->dev, 0),
+					USB_REQUEST_ION_WRITE_RAM,
+					0x40, addr, extAddr, transfer_buffer,
+					current_length, 300);
+		if (result < 0)
+			break;
+		length -= current_length;
+		addr += current_length;
+		data += current_length;
+	}
+
+	kfree(transfer_buffer);
+	return result;
+}
+
+
+/****************************************************************************
+ * rom_write
+ *	writes a number of bytes to the Edgeport device's ROM starting at the
+ *	given address.
+ *	If successful returns the number of bytes written, otherwise it returns
+ *	a negative error number of the problem.
+ ****************************************************************************/
+static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
+					__u16 length, const __u8 *data)
+{
+	int result;
+	__u16 current_length;
+	unsigned char *transfer_buffer;
+
+	transfer_buffer =  kmalloc(64, GFP_KERNEL);
+	if (!transfer_buffer)
+		return -ENOMEM;
+
+	/* need to split these writes up into 64 byte chunks */
+	result = 0;
+	while (length > 0) {
+		if (length > 64)
+			current_length = 64;
+		else
+			current_length = length;
+		memcpy(transfer_buffer, data, current_length);
+		result = usb_control_msg(serial->dev,
+					usb_sndctrlpipe(serial->dev, 0),
+					USB_REQUEST_ION_WRITE_ROM, 0x40,
+					addr, extAddr,
+					transfer_buffer, current_length, 300);
+		if (result < 0)
+			break;
+		length -= current_length;
+		addr += current_length;
+		data += current_length;
+	}
+
+	kfree(transfer_buffer);
+	return result;
+}
+
+
+/****************************************************************************
+ * rom_read
+ *	reads a number of bytes from the Edgeport device starting at the given
+ *	address.
+ *	Returns zero on success or a negative error number.
+ ****************************************************************************/
+static int rom_read(struct usb_serial *serial, __u16 extAddr,
+					__u16 addr, __u16 length, __u8 *data)
+{
+	int result;
+	__u16 current_length;
+	unsigned char *transfer_buffer;
+
+	transfer_buffer =  kmalloc(64, GFP_KERNEL);
+	if (!transfer_buffer)
+		return -ENOMEM;
+
+	/* need to split these reads up into 64 byte chunks */
+	result = 0;
+	while (length > 0) {
+		if (length > 64)
+			current_length = 64;
+		else
+			current_length = length;
+		result = usb_control_msg(serial->dev,
+					usb_rcvctrlpipe(serial->dev, 0),
+					USB_REQUEST_ION_READ_ROM,
+					0xC0, addr, extAddr, transfer_buffer,
+					current_length, 300);
+		if (result < current_length) {
+			if (result >= 0)
+				result = -EIO;
+			break;
+		}
+		memcpy(data, transfer_buffer, current_length);
+		length -= current_length;
+		addr += current_length;
+		data += current_length;
+
+		result = 0;
+	}
+
+	kfree(transfer_buffer);
+	return result;
+}
+
+
+/****************************************************************************
+ * send_iosp_ext_cmd
+ *	Is used to send a IOSP message to the Edgeport device
+ ****************************************************************************/
+static int send_iosp_ext_cmd(struct edgeport_port *edge_port,
+						__u8 command, __u8 param)
+{
+	unsigned char   *buffer;
+	unsigned char   *currentCommand;
+	int             length = 0;
+	int             status = 0;
+
+	buffer = kmalloc(10, GFP_ATOMIC);
+	if (!buffer)
+		return -ENOMEM;
+
+	currentCommand = buffer;
+
+	MAKE_CMD_EXT_CMD(&currentCommand, &length, edge_port->port->port_number,
+			 command, param);
+
+	status = write_cmd_usb(edge_port, buffer, length);
+	if (status) {
+		/* something bad happened, let's free up the memory */
+		kfree(buffer);
+	}
+
+	return status;
+}
+
+
+/*****************************************************************************
+ * write_cmd_usb
+ *	this function writes the given buffer out to the bulk write endpoint.
+ *****************************************************************************/
+static int write_cmd_usb(struct edgeport_port *edge_port,
+					unsigned char *buffer, int length)
+{
+	struct edgeport_serial *edge_serial =
+				usb_get_serial_data(edge_port->port->serial);
+	struct device *dev = &edge_port->port->dev;
+	int status = 0;
+	struct urb *urb;
+
+	usb_serial_debug_data(dev, __func__, length, buffer);
+
+	/* Allocate our next urb */
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb)
+		return -ENOMEM;
+
+	atomic_inc(&CmdUrbs);
+	dev_dbg(dev, "%s - ALLOCATE URB %p (outstanding %d)\n",
+		__func__, urb, atomic_read(&CmdUrbs));
+
+	usb_fill_bulk_urb(urb, edge_serial->serial->dev,
+			usb_sndbulkpipe(edge_serial->serial->dev,
+					edge_serial->bulk_out_endpoint),
+			buffer, length, edge_bulk_out_cmd_callback, edge_port);
+
+	edge_port->commandPending = true;
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+
+	if (status) {
+		/* something went wrong */
+		dev_err(dev, "%s - usb_submit_urb(write command) failed, status = %d\n",
+			__func__, status);
+		usb_free_urb(urb);
+		atomic_dec(&CmdUrbs);
+		return status;
+	}
+
+#if 0
+	wait_event(&edge_port->wait_command, !edge_port->commandPending);
+
+	if (edge_port->commandPending) {
+		/* command timed out */
+		dev_dbg(dev, "%s - command timed out\n", __func__);
+		status = -EINVAL;
+	}
+#endif
+	return status;
+}
+
+
+/*****************************************************************************
+ * send_cmd_write_baud_rate
+ *	this function sends the proper command to change the baud rate of the
+ *	specified port.
+ *****************************************************************************/
+static int send_cmd_write_baud_rate(struct edgeport_port *edge_port,
+								int baudRate)
+{
+	struct edgeport_serial *edge_serial =
+				usb_get_serial_data(edge_port->port->serial);
+	struct device *dev = &edge_port->port->dev;
+	unsigned char *cmdBuffer;
+	unsigned char *currCmd;
+	int cmdLen = 0;
+	int divisor;
+	int status;
+	u32 number = edge_port->port->port_number;
+
+	if (edge_serial->is_epic &&
+	    !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) {
+		dev_dbg(dev, "SendCmdWriteBaudRate - NOT Setting baud rate for port, baud = %d\n",
+			baudRate);
+		return 0;
+	}
+
+	dev_dbg(dev, "%s - baud = %d\n", __func__, baudRate);
+
+	status = calc_baud_rate_divisor(dev, baudRate, &divisor);
+	if (status) {
+		dev_err(dev, "%s - bad baud rate\n", __func__);
+		return status;
+	}
+
+	/* Alloc memory for the string of commands. */
+	cmdBuffer =  kmalloc(0x100, GFP_ATOMIC);
+	if (!cmdBuffer)
+		return -ENOMEM;
+
+	currCmd = cmdBuffer;
+
+	/* Enable access to divisor latch */
+	MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE);
+
+	/* Write the divisor itself */
+	MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLL, LOW8(divisor));
+	MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLM, HIGH8(divisor));
+
+	/* Restore original value to disable access to divisor latch */
+	MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR,
+						edge_port->shadowLCR);
+
+	status = write_cmd_usb(edge_port, cmdBuffer, cmdLen);
+	if (status) {
+		/* something bad happened, let's free up the memory */
+		kfree(cmdBuffer);
+	}
+
+	return status;
+}
+
+
+/*****************************************************************************
+ * calc_baud_rate_divisor
+ *	this function calculates the proper baud rate divisor for the specified
+ *	baud rate.
+ *****************************************************************************/
+static int calc_baud_rate_divisor(struct device *dev, int baudrate, int *divisor)
+{
+	int i;
+	__u16 custom;
+
+	for (i = 0; i < ARRAY_SIZE(divisor_table); i++) {
+		if (divisor_table[i].BaudRate == baudrate) {
+			*divisor = divisor_table[i].Divisor;
+			return 0;
+		}
+	}
+
+	/* We have tried all of the standard baud rates
+	 * lets try to calculate the divisor for this baud rate
+	 * Make sure the baud rate is reasonable */
+	if (baudrate > 50 && baudrate < 230400) {
+		/* get divisor */
+		custom = (__u16)((230400L + baudrate/2) / baudrate);
+
+		*divisor = custom;
+
+		dev_dbg(dev, "%s - Baud %d = %d\n", __func__, baudrate, custom);
+		return 0;
+	}
+
+	return -1;
+}
+
+
+/*****************************************************************************
+ * send_cmd_write_uart_register
+ *  this function builds up a uart register message and sends to the device.
+ *****************************************************************************/
+static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
+						__u8 regNum, __u8 regValue)
+{
+	struct edgeport_serial *edge_serial =
+				usb_get_serial_data(edge_port->port->serial);
+	struct device *dev = &edge_port->port->dev;
+	unsigned char *cmdBuffer;
+	unsigned char *currCmd;
+	unsigned long cmdLen = 0;
+	int status;
+
+	dev_dbg(dev, "%s - write to %s register 0x%02x\n",
+		(regNum == MCR) ? "MCR" : "LCR", __func__, regValue);
+
+	if (edge_serial->is_epic &&
+	    !edge_serial->epic_descriptor.Supports.IOSPWriteMCR &&
+	    regNum == MCR) {
+		dev_dbg(dev, "SendCmdWriteUartReg - Not writing to MCR Register\n");
+		return 0;
+	}
+
+	if (edge_serial->is_epic &&
+	    !edge_serial->epic_descriptor.Supports.IOSPWriteLCR &&
+	    regNum == LCR) {
+		dev_dbg(dev, "SendCmdWriteUartReg - Not writing to LCR Register\n");
+		return 0;
+	}
+
+	/* Alloc memory for the string of commands. */
+	cmdBuffer = kmalloc(0x10, GFP_ATOMIC);
+	if (cmdBuffer == NULL)
+		return -ENOMEM;
+
+	currCmd = cmdBuffer;
+
+	/* Build a cmd in the buffer to write the given register */
+	MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, edge_port->port->port_number,
+			   regNum, regValue);
+
+	status = write_cmd_usb(edge_port, cmdBuffer, cmdLen);
+	if (status) {
+		/* something bad happened, let's free up the memory */
+		kfree(cmdBuffer);
+	}
+
+	return status;
+}
+
+
+/*****************************************************************************
+ * change_port_settings
+ *	This routine is called to set the UART on the device to match the
+ *	specified new settings.
+ *****************************************************************************/
+
+static void change_port_settings(struct tty_struct *tty,
+	struct edgeport_port *edge_port, const struct ktermios *old_termios)
+{
+	struct device *dev = &edge_port->port->dev;
+	struct edgeport_serial *edge_serial =
+			usb_get_serial_data(edge_port->port->serial);
+	int baud;
+	unsigned cflag;
+	__u8 mask = 0xff;
+	__u8 lData;
+	__u8 lParity;
+	__u8 lStop;
+	__u8 rxFlow;
+	__u8 txFlow;
+	int status;
+
+	if (!edge_port->open &&
+	    !edge_port->openPending) {
+		dev_dbg(dev, "%s - port not opened\n", __func__);
+		return;
+	}
+
+	cflag = tty->termios.c_cflag;
+
+	switch (cflag & CSIZE) {
+	case CS5:
+		lData = LCR_BITS_5; mask = 0x1f;
+		dev_dbg(dev, "%s - data bits = 5\n", __func__);
+		break;
+	case CS6:
+		lData = LCR_BITS_6; mask = 0x3f;
+		dev_dbg(dev, "%s - data bits = 6\n", __func__);
+		break;
+	case CS7:
+		lData = LCR_BITS_7; mask = 0x7f;
+		dev_dbg(dev, "%s - data bits = 7\n", __func__);
+		break;
+	default:
+	case CS8:
+		lData = LCR_BITS_8;
+		dev_dbg(dev, "%s - data bits = 8\n", __func__);
+		break;
+	}
+
+	lParity = LCR_PAR_NONE;
+	if (cflag & PARENB) {
+		if (cflag & CMSPAR) {
+			if (cflag & PARODD) {
+				lParity = LCR_PAR_MARK;
+				dev_dbg(dev, "%s - parity = mark\n", __func__);
+			} else {
+				lParity = LCR_PAR_SPACE;
+				dev_dbg(dev, "%s - parity = space\n", __func__);
+			}
+		} else if (cflag & PARODD) {
+			lParity = LCR_PAR_ODD;
+			dev_dbg(dev, "%s - parity = odd\n", __func__);
+		} else {
+			lParity = LCR_PAR_EVEN;
+			dev_dbg(dev, "%s - parity = even\n", __func__);
+		}
+	} else {
+		dev_dbg(dev, "%s - parity = none\n", __func__);
+	}
+
+	if (cflag & CSTOPB) {
+		lStop = LCR_STOP_2;
+		dev_dbg(dev, "%s - stop bits = 2\n", __func__);
+	} else {
+		lStop = LCR_STOP_1;
+		dev_dbg(dev, "%s - stop bits = 1\n", __func__);
+	}
+
+	/* figure out the flow control settings */
+	rxFlow = txFlow = 0x00;
+	if (cflag & CRTSCTS) {
+		rxFlow |= IOSP_RX_FLOW_RTS;
+		txFlow |= IOSP_TX_FLOW_CTS;
+		dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__);
+	} else {
+		dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__);
+	}
+
+	/* if we are implementing XON/XOFF, set the start and stop character
+	   in the device */
+	if (I_IXOFF(tty) || I_IXON(tty)) {
+		unsigned char stop_char  = STOP_CHAR(tty);
+		unsigned char start_char = START_CHAR(tty);
+
+		if (!edge_serial->is_epic ||
+		    edge_serial->epic_descriptor.Supports.IOSPSetXChar) {
+			send_iosp_ext_cmd(edge_port,
+					IOSP_CMD_SET_XON_CHAR, start_char);
+			send_iosp_ext_cmd(edge_port,
+					IOSP_CMD_SET_XOFF_CHAR, stop_char);
+		}
+
+		/* if we are implementing INBOUND XON/XOFF */
+		if (I_IXOFF(tty)) {
+			rxFlow |= IOSP_RX_FLOW_XON_XOFF;
+			dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
+				__func__, start_char, stop_char);
+		} else {
+			dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__);
+		}
+
+		/* if we are implementing OUTBOUND XON/XOFF */
+		if (I_IXON(tty)) {
+			txFlow |= IOSP_TX_FLOW_XON_XOFF;
+			dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
+				__func__, start_char, stop_char);
+		} else {
+			dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__);
+		}
+	}
+
+	/* Set flow control to the configured value */
+	if (!edge_serial->is_epic ||
+	    edge_serial->epic_descriptor.Supports.IOSPSetRxFlow)
+		send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_RX_FLOW, rxFlow);
+	if (!edge_serial->is_epic ||
+	    edge_serial->epic_descriptor.Supports.IOSPSetTxFlow)
+		send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_TX_FLOW, txFlow);
+
+
+	edge_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
+	edge_port->shadowLCR |= (lData | lParity | lStop);
+
+	edge_port->validDataMask = mask;
+
+	/* Send the updated LCR value to the EdgePort */
+	status = send_cmd_write_uart_register(edge_port, LCR,
+							edge_port->shadowLCR);
+	if (status != 0)
+		return;
+
+	/* set up the MCR register and send it to the EdgePort */
+	edge_port->shadowMCR = MCR_MASTER_IE;
+	if (cflag & CBAUD)
+		edge_port->shadowMCR |= (MCR_DTR | MCR_RTS);
+
+	status = send_cmd_write_uart_register(edge_port, MCR,
+						edge_port->shadowMCR);
+	if (status != 0)
+		return;
+
+	/* Determine divisor based on baud rate */
+	baud = tty_get_baud_rate(tty);
+	if (!baud) {
+		/* pick a default, any default... */
+		baud = 9600;
+	}
+
+	dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
+	status = send_cmd_write_baud_rate(edge_port, baud);
+	if (status == -1) {
+		/* Speed change was not possible - put back the old speed */
+		baud = tty_termios_baud_rate(old_termios);
+		tty_encode_baud_rate(tty, baud, baud);
+	}
+}
+
+
+/****************************************************************************
+ * unicode_to_ascii
+ *	Turns a string from Unicode into ASCII.
+ *	Doesn't do a good job with any characters that are outside the normal
+ *	ASCII range, but it's only for debugging...
+ *	NOTE: expects the unicode in LE format
+ ****************************************************************************/
+static void unicode_to_ascii(char *string, int buflen,
+					__le16 *unicode, int unicode_size)
+{
+	int i;
+
+	if (buflen <= 0)	/* never happens, but... */
+		return;
+	--buflen;		/* space for nul */
+
+	for (i = 0; i < unicode_size; i++) {
+		if (i >= buflen)
+			break;
+		string[i] = (char)(le16_to_cpu(unicode[i]));
+	}
+	string[i] = 0x00;
+}
+
+
+/****************************************************************************
+ * get_manufacturing_desc
+ *	reads in the manufacturing descriptor and stores it into the serial
+ *	structure.
+ ****************************************************************************/
+static void get_manufacturing_desc(struct edgeport_serial *edge_serial)
+{
+	struct device *dev = &edge_serial->serial->dev->dev;
+	int response;
+
+	dev_dbg(dev, "getting manufacturer descriptor\n");
+
+	response = rom_read(edge_serial->serial,
+				(EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16,
+				(__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff),
+				EDGE_MANUF_DESC_LEN,
+				(__u8 *)(&edge_serial->manuf_descriptor));
+
+	if (response < 0) {
+		dev_err(dev, "error in getting manufacturer descriptor: %d\n",
+				response);
+	} else {
+		char string[30];
+		dev_dbg(dev, "**Manufacturer Descriptor\n");
+		dev_dbg(dev, "  RomSize:        %dK\n",
+			edge_serial->manuf_descriptor.RomSize);
+		dev_dbg(dev, "  RamSize:        %dK\n",
+			edge_serial->manuf_descriptor.RamSize);
+		dev_dbg(dev, "  CpuRev:         %d\n",
+			edge_serial->manuf_descriptor.CpuRev);
+		dev_dbg(dev, "  BoardRev:       %d\n",
+			edge_serial->manuf_descriptor.BoardRev);
+		dev_dbg(dev, "  NumPorts:       %d\n",
+			edge_serial->manuf_descriptor.NumPorts);
+		dev_dbg(dev, "  DescDate:       %d/%d/%d\n",
+			edge_serial->manuf_descriptor.DescDate[0],
+			edge_serial->manuf_descriptor.DescDate[1],
+			edge_serial->manuf_descriptor.DescDate[2]+1900);
+		unicode_to_ascii(string, sizeof(string),
+			edge_serial->manuf_descriptor.SerialNumber,
+			edge_serial->manuf_descriptor.SerNumLength/2);
+		dev_dbg(dev, "  SerialNumber: %s\n", string);
+		unicode_to_ascii(string, sizeof(string),
+			edge_serial->manuf_descriptor.AssemblyNumber,
+			edge_serial->manuf_descriptor.AssemblyNumLength/2);
+		dev_dbg(dev, "  AssemblyNumber: %s\n", string);
+		unicode_to_ascii(string, sizeof(string),
+		    edge_serial->manuf_descriptor.OemAssyNumber,
+		    edge_serial->manuf_descriptor.OemAssyNumLength/2);
+		dev_dbg(dev, "  OemAssyNumber:  %s\n", string);
+		dev_dbg(dev, "  UartType:       %d\n",
+			edge_serial->manuf_descriptor.UartType);
+		dev_dbg(dev, "  IonPid:         %d\n",
+			edge_serial->manuf_descriptor.IonPid);
+		dev_dbg(dev, "  IonConfig:      %d\n",
+			edge_serial->manuf_descriptor.IonConfig);
+	}
+}
+
+
+/****************************************************************************
+ * get_boot_desc
+ *	reads in the bootloader descriptor and stores it into the serial
+ *	structure.
+ ****************************************************************************/
+static void get_boot_desc(struct edgeport_serial *edge_serial)
+{
+	struct device *dev = &edge_serial->serial->dev->dev;
+	int response;
+
+	dev_dbg(dev, "getting boot descriptor\n");
+
+	response = rom_read(edge_serial->serial,
+				(EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16,
+				(__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff),
+				EDGE_BOOT_DESC_LEN,
+				(__u8 *)(&edge_serial->boot_descriptor));
+
+	if (response < 0) {
+		dev_err(dev, "error in getting boot descriptor: %d\n",
+				response);
+	} else {
+		dev_dbg(dev, "**Boot Descriptor:\n");
+		dev_dbg(dev, "  BootCodeLength: %d\n",
+			le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength));
+		dev_dbg(dev, "  MajorVersion:   %d\n",
+			edge_serial->boot_descriptor.MajorVersion);
+		dev_dbg(dev, "  MinorVersion:   %d\n",
+			edge_serial->boot_descriptor.MinorVersion);
+		dev_dbg(dev, "  BuildNumber:    %d\n",
+			le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
+		dev_dbg(dev, "  Capabilities:   0x%x\n",
+		      le16_to_cpu(edge_serial->boot_descriptor.Capabilities));
+		dev_dbg(dev, "  UConfig0:       %d\n",
+			edge_serial->boot_descriptor.UConfig0);
+		dev_dbg(dev, "  UConfig1:       %d\n",
+			edge_serial->boot_descriptor.UConfig1);
+	}
+}
+
+
+/****************************************************************************
+ * load_application_firmware
+ *	This is called to load the application firmware to the device
+ ****************************************************************************/
+static void load_application_firmware(struct edgeport_serial *edge_serial)
+{
+	struct device *dev = &edge_serial->serial->dev->dev;
+	const struct ihex_binrec *rec;
+	const struct firmware *fw;
+	const char *fw_name;
+	const char *fw_info;
+	int response;
+	__u32 Operaddr;
+	__u16 build;
+
+	switch (edge_serial->product_info.iDownloadFile) {
+		case EDGE_DOWNLOAD_FILE_I930:
+			fw_info = "downloading firmware version (930)";
+			fw_name	= "edgeport/down.fw";
+			break;
+
+		case EDGE_DOWNLOAD_FILE_80251:
+			fw_info = "downloading firmware version (80251)";
+			fw_name	= "edgeport/down2.fw";
+			break;
+
+		case EDGE_DOWNLOAD_FILE_NONE:
+			dev_dbg(dev, "No download file specified, skipping download\n");
+			return;
+
+		default:
+			return;
+	}
+
+	response = request_ihex_firmware(&fw, fw_name,
+				    &edge_serial->serial->dev->dev);
+	if (response) {
+		dev_err(dev, "Failed to load image \"%s\" err %d\n",
+		       fw_name, response);
+		return;
+	}
+
+	rec = (const struct ihex_binrec *)fw->data;
+	build = (rec->data[2] << 8) | rec->data[3];
+
+	dev_dbg(dev, "%s %d.%d.%d\n", fw_info, rec->data[0], rec->data[1], build);
+
+	edge_serial->product_info.FirmwareMajorVersion = rec->data[0];
+	edge_serial->product_info.FirmwareMinorVersion = rec->data[1];
+	edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build);
+
+	for (rec = ihex_next_binrec(rec); rec;
+	     rec = ihex_next_binrec(rec)) {
+		Operaddr = be32_to_cpu(rec->addr);
+		response = sram_write(edge_serial->serial,
+				     Operaddr >> 16,
+				     Operaddr & 0xFFFF,
+				     be16_to_cpu(rec->len),
+				     &rec->data[0]);
+		if (response < 0) {
+			dev_err(&edge_serial->serial->dev->dev,
+				"sram_write failed (%x, %x, %d)\n",
+				Operaddr >> 16, Operaddr & 0xFFFF,
+				be16_to_cpu(rec->len));
+			break;
+		}
+	}
+
+	dev_dbg(dev, "sending exec_dl_code\n");
+	response = usb_control_msg (edge_serial->serial->dev,
+				    usb_sndctrlpipe(edge_serial->serial->dev, 0),
+				    USB_REQUEST_ION_EXEC_DL_CODE,
+				    0x40, 0x4000, 0x0001, NULL, 0, 3000);
+
+	release_firmware(fw);
+}
+
+
+/****************************************************************************
+ * edge_startup
+ ****************************************************************************/
+static int edge_startup(struct usb_serial *serial)
+{
+	struct edgeport_serial *edge_serial;
+	struct usb_device *dev;
+	struct device *ddev = &serial->dev->dev;
+	int i;
+	int response;
+	bool interrupt_in_found;
+	bool bulk_in_found;
+	bool bulk_out_found;
+	static const __u32 descriptor[3] = {	EDGE_COMPATIBILITY_MASK0,
+						EDGE_COMPATIBILITY_MASK1,
+						EDGE_COMPATIBILITY_MASK2 };
+
+	dev = serial->dev;
+
+	/* create our private serial structure */
+	edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
+	if (!edge_serial)
+		return -ENOMEM;
+
+	spin_lock_init(&edge_serial->es_lock);
+	edge_serial->serial = serial;
+	usb_set_serial_data(serial, edge_serial);
+
+	/* get the name for the device from the device */
+	i = usb_string(dev, dev->descriptor.iManufacturer,
+	    &edge_serial->name[0], MAX_NAME_LEN+1);
+	if (i < 0)
+		i = 0;
+	edge_serial->name[i++] = ' ';
+	usb_string(dev, dev->descriptor.iProduct,
+	    &edge_serial->name[i], MAX_NAME_LEN+2 - i);
+
+	dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name);
+
+	/* Read the epic descriptor */
+	if (get_epic_descriptor(edge_serial) < 0) {
+		/* memcpy descriptor to Supports structures */
+		memcpy(&edge_serial->epic_descriptor.Supports, descriptor,
+		       sizeof(struct edge_compatibility_bits));
+
+		/* get the manufacturing descriptor for this device */
+		get_manufacturing_desc(edge_serial);
+
+		/* get the boot descriptor */
+		get_boot_desc(edge_serial);
+
+		get_product_info(edge_serial);
+	}
+
+	/* set the number of ports from the manufacturing description */
+	/* serial->num_ports = serial->product_info.NumPorts; */
+	if ((!edge_serial->is_epic) &&
+	    (edge_serial->product_info.NumPorts != serial->num_ports)) {
+		dev_warn(ddev,
+			"Device Reported %d serial ports vs. core thinking we have %d ports, email greg@kroah.com this information.\n",
+			 edge_serial->product_info.NumPorts,
+			 serial->num_ports);
+	}
+
+	dev_dbg(ddev, "%s - time 1 %ld\n", __func__, jiffies);
+
+	/* If not an EPiC device */
+	if (!edge_serial->is_epic) {
+		/* now load the application firmware into this device */
+		load_application_firmware(edge_serial);
+
+		dev_dbg(ddev, "%s - time 2 %ld\n", __func__, jiffies);
+
+		/* Check current Edgeport EEPROM and update if necessary */
+		update_edgeport_E2PROM(edge_serial);
+
+		dev_dbg(ddev, "%s - time 3 %ld\n", __func__, jiffies);
+
+		/* set the configuration to use #1 */
+/*		dev_dbg(ddev, "set_configuration 1\n"); */
+/*		usb_set_configuration (dev, 1); */
+	}
+	dev_dbg(ddev, "  FirmwareMajorVersion  %d.%d.%d\n",
+	    edge_serial->product_info.FirmwareMajorVersion,
+	    edge_serial->product_info.FirmwareMinorVersion,
+	    le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber));
+
+	/* we set up the pointers to the endpoints in the edge_open function,
+	 * as the structures aren't created yet. */
+
+	response = 0;
+
+	if (edge_serial->is_epic) {
+		struct usb_host_interface *alt;
+
+		alt = serial->interface->cur_altsetting;
+
+		/* EPIC thing, set up our interrupt polling now and our read
+		 * urb, so that the device knows it really is connected. */
+		interrupt_in_found = bulk_in_found = bulk_out_found = false;
+		for (i = 0; i < alt->desc.bNumEndpoints; ++i) {
+			struct usb_endpoint_descriptor *endpoint;
+			int buffer_size;
+
+			endpoint = &alt->endpoint[i].desc;
+			buffer_size = usb_endpoint_maxp(endpoint);
+			if (!interrupt_in_found &&
+			    (usb_endpoint_is_int_in(endpoint))) {
+				/* we found a interrupt in endpoint */
+				dev_dbg(ddev, "found interrupt in\n");
+
+				/* not set up yet, so do it now */
+				edge_serial->interrupt_read_urb =
+						usb_alloc_urb(0, GFP_KERNEL);
+				if (!edge_serial->interrupt_read_urb) {
+					response = -ENOMEM;
+					break;
+				}
+
+				edge_serial->interrupt_in_buffer =
+					kmalloc(buffer_size, GFP_KERNEL);
+				if (!edge_serial->interrupt_in_buffer) {
+					response = -ENOMEM;
+					break;
+				}
+				edge_serial->interrupt_in_endpoint =
+						endpoint->bEndpointAddress;
+
+				/* set up our interrupt urb */
+				usb_fill_int_urb(
+					edge_serial->interrupt_read_urb,
+					dev,
+					usb_rcvintpipe(dev,
+						endpoint->bEndpointAddress),
+					edge_serial->interrupt_in_buffer,
+					buffer_size,
+					edge_interrupt_callback,
+					edge_serial,
+					endpoint->bInterval);
+
+				interrupt_in_found = true;
+			}
+
+			if (!bulk_in_found &&
+				(usb_endpoint_is_bulk_in(endpoint))) {
+				/* we found a bulk in endpoint */
+				dev_dbg(ddev, "found bulk in\n");
+
+				/* not set up yet, so do it now */
+				edge_serial->read_urb =
+						usb_alloc_urb(0, GFP_KERNEL);
+				if (!edge_serial->read_urb) {
+					response = -ENOMEM;
+					break;
+				}
+
+				edge_serial->bulk_in_buffer =
+					kmalloc(buffer_size, GFP_KERNEL);
+				if (!edge_serial->bulk_in_buffer) {
+					response = -ENOMEM;
+					break;
+				}
+				edge_serial->bulk_in_endpoint =
+						endpoint->bEndpointAddress;
+
+				/* set up our bulk in urb */
+				usb_fill_bulk_urb(edge_serial->read_urb, dev,
+					usb_rcvbulkpipe(dev,
+						endpoint->bEndpointAddress),
+					edge_serial->bulk_in_buffer,
+					usb_endpoint_maxp(endpoint),
+					edge_bulk_in_callback,
+					edge_serial);
+				bulk_in_found = true;
+			}
+
+			if (!bulk_out_found &&
+			    (usb_endpoint_is_bulk_out(endpoint))) {
+				/* we found a bulk out endpoint */
+				dev_dbg(ddev, "found bulk out\n");
+				edge_serial->bulk_out_endpoint =
+						endpoint->bEndpointAddress;
+				bulk_out_found = true;
+			}
+		}
+
+		if (response || !interrupt_in_found || !bulk_in_found ||
+							!bulk_out_found) {
+			if (!response) {
+				dev_err(ddev, "expected endpoints not found\n");
+				response = -ENODEV;
+			}
+
+			goto error;
+		}
+
+		/* start interrupt read for this edgeport this interrupt will
+		 * continue as long as the edgeport is connected */
+		response = usb_submit_urb(edge_serial->interrupt_read_urb,
+								GFP_KERNEL);
+		if (response) {
+			dev_err(ddev, "%s - Error %d submitting control urb\n",
+				__func__, response);
+
+			goto error;
+		}
+	}
+	return response;
+
+error:
+	usb_free_urb(edge_serial->interrupt_read_urb);
+	kfree(edge_serial->interrupt_in_buffer);
+
+	usb_free_urb(edge_serial->read_urb);
+	kfree(edge_serial->bulk_in_buffer);
+
+	kfree(edge_serial);
+
+	return response;
+}
+
+
+/****************************************************************************
+ * edge_disconnect
+ *	This function is called whenever the device is removed from the usb bus.
+ ****************************************************************************/
+static void edge_disconnect(struct usb_serial *serial)
+{
+	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+
+	if (edge_serial->is_epic) {
+		usb_kill_urb(edge_serial->interrupt_read_urb);
+		usb_kill_urb(edge_serial->read_urb);
+	}
+}
+
+
+/****************************************************************************
+ * edge_release
+ *	This function is called when the device structure is deallocated.
+ ****************************************************************************/
+static void edge_release(struct usb_serial *serial)
+{
+	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+
+	if (edge_serial->is_epic) {
+		usb_kill_urb(edge_serial->interrupt_read_urb);
+		usb_free_urb(edge_serial->interrupt_read_urb);
+		kfree(edge_serial->interrupt_in_buffer);
+
+		usb_kill_urb(edge_serial->read_urb);
+		usb_free_urb(edge_serial->read_urb);
+		kfree(edge_serial->bulk_in_buffer);
+	}
+
+	kfree(edge_serial);
+}
+
+static int edge_port_probe(struct usb_serial_port *port)
+{
+	struct edgeport_port *edge_port;
+
+	edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL);
+	if (!edge_port)
+		return -ENOMEM;
+
+	spin_lock_init(&edge_port->ep_lock);
+	edge_port->port = port;
+
+	usb_set_serial_port_data(port, edge_port);
+
+	return 0;
+}
+
+static void edge_port_remove(struct usb_serial_port *port)
+{
+	struct edgeport_port *edge_port;
+
+	edge_port = usb_get_serial_port_data(port);
+	kfree(edge_port);
+}
+
+static struct usb_serial_driver edgeport_2port_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "edgeport_2",
+	},
+	.description		= "Edgeport 2 port adapter",
+	.id_table		= edgeport_2port_id_table,
+	.num_ports		= 2,
+	.num_bulk_in		= 1,
+	.num_bulk_out		= 1,
+	.num_interrupt_in	= 1,
+	.open			= edge_open,
+	.close			= edge_close,
+	.throttle		= edge_throttle,
+	.unthrottle		= edge_unthrottle,
+	.attach			= edge_startup,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
+	.ioctl			= edge_ioctl,
+	.set_termios		= edge_set_termios,
+	.tiocmget		= edge_tiocmget,
+	.tiocmset		= edge_tiocmset,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
+	.write			= edge_write,
+	.write_room		= edge_write_room,
+	.chars_in_buffer	= edge_chars_in_buffer,
+	.break_ctl		= edge_break,
+	.read_int_callback	= edge_interrupt_callback,
+	.read_bulk_callback	= edge_bulk_in_callback,
+	.write_bulk_callback	= edge_bulk_out_data_callback,
+};
+
+static struct usb_serial_driver edgeport_4port_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "edgeport_4",
+	},
+	.description		= "Edgeport 4 port adapter",
+	.id_table		= edgeport_4port_id_table,
+	.num_ports		= 4,
+	.num_bulk_in		= 1,
+	.num_bulk_out		= 1,
+	.num_interrupt_in	= 1,
+	.open			= edge_open,
+	.close			= edge_close,
+	.throttle		= edge_throttle,
+	.unthrottle		= edge_unthrottle,
+	.attach			= edge_startup,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
+	.ioctl			= edge_ioctl,
+	.set_termios		= edge_set_termios,
+	.tiocmget		= edge_tiocmget,
+	.tiocmset		= edge_tiocmset,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
+	.write			= edge_write,
+	.write_room		= edge_write_room,
+	.chars_in_buffer	= edge_chars_in_buffer,
+	.break_ctl		= edge_break,
+	.read_int_callback	= edge_interrupt_callback,
+	.read_bulk_callback	= edge_bulk_in_callback,
+	.write_bulk_callback	= edge_bulk_out_data_callback,
+};
+
+static struct usb_serial_driver edgeport_8port_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "edgeport_8",
+	},
+	.description		= "Edgeport 8 port adapter",
+	.id_table		= edgeport_8port_id_table,
+	.num_ports		= 8,
+	.num_bulk_in		= 1,
+	.num_bulk_out		= 1,
+	.num_interrupt_in	= 1,
+	.open			= edge_open,
+	.close			= edge_close,
+	.throttle		= edge_throttle,
+	.unthrottle		= edge_unthrottle,
+	.attach			= edge_startup,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
+	.ioctl			= edge_ioctl,
+	.set_termios		= edge_set_termios,
+	.tiocmget		= edge_tiocmget,
+	.tiocmset		= edge_tiocmset,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
+	.write			= edge_write,
+	.write_room		= edge_write_room,
+	.chars_in_buffer	= edge_chars_in_buffer,
+	.break_ctl		= edge_break,
+	.read_int_callback	= edge_interrupt_callback,
+	.read_bulk_callback	= edge_bulk_in_callback,
+	.write_bulk_callback	= edge_bulk_out_data_callback,
+};
+
+static struct usb_serial_driver epic_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "epic",
+	},
+	.description		= "EPiC device",
+	.id_table		= Epic_port_id_table,
+	.num_ports		= 1,
+	.num_bulk_in		= 1,
+	.num_bulk_out		= 1,
+	.num_interrupt_in	= 1,
+	.open			= edge_open,
+	.close			= edge_close,
+	.throttle		= edge_throttle,
+	.unthrottle		= edge_unthrottle,
+	.attach			= edge_startup,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
+	.ioctl			= edge_ioctl,
+	.set_termios		= edge_set_termios,
+	.tiocmget		= edge_tiocmget,
+	.tiocmset		= edge_tiocmset,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
+	.write			= edge_write,
+	.write_room		= edge_write_room,
+	.chars_in_buffer	= edge_chars_in_buffer,
+	.break_ctl		= edge_break,
+	.read_int_callback	= edge_interrupt_callback,
+	.read_bulk_callback	= edge_bulk_in_callback,
+	.write_bulk_callback	= edge_bulk_out_data_callback,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&edgeport_2port_device, &edgeport_4port_device,
+	&edgeport_8port_device, &epic_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table_combined);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("edgeport/boot.fw");
+MODULE_FIRMWARE("edgeport/boot2.fw");
+MODULE_FIRMWARE("edgeport/down.fw");
+MODULE_FIRMWARE("edgeport/down2.fw");
diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h
new file mode 100644
index 000000000..7c9f62af5
--- /dev/null
+++ b/drivers/usb/serial/io_edgeport.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/************************************************************************
+ *
+ *	io_edgeport.h	Edgeport Linux Interface definitions
+ *
+ *	Copyright (C) 2000 Inside Out Networks, Inc.
+ *
+ ************************************************************************/
+
+#if !defined(_IO_EDGEPORT_H_)
+#define	_IO_EDGEPORT_H_
+
+#define MAX_RS232_PORTS		8	/* Max # of RS-232 ports per device */
+
+/* typedefs that the insideout headers need */
+#ifndef LOW8
+	#define LOW8(a)		((unsigned char)(a & 0xff))
+#endif
+#ifndef HIGH8
+	#define HIGH8(a)	((unsigned char)((a & 0xff00) >> 8))
+#endif
+
+#include "io_usbvend.h"
+
+/*
+ *	Product information read from the Edgeport
+ */
+struct edgeport_product_info {
+	__u16	ProductId;			/* Product Identifier */
+	__u8	NumPorts;			/* Number of ports on edgeport */
+	__u8	ProdInfoVer;			/* What version of structure is this? */
+
+	__u32	IsServer        :1;		/* Set if Server */
+	__u32	IsRS232         :1;		/* Set if RS-232 ports exist */
+	__u32	IsRS422         :1;		/* Set if RS-422 ports exist */
+	__u32	IsRS485         :1;		/* Set if RS-485 ports exist */
+	__u32	IsReserved      :28;		/* Reserved for later expansion */
+
+	__u8	RomSize;			/* Size of ROM/E2PROM in K */
+	__u8	RamSize;			/* Size of external RAM in K */
+	__u8	CpuRev;				/* CPU revision level (chg only if s/w visible) */
+	__u8	BoardRev;			/* PCB revision level (chg only if s/w visible) */
+
+	__u8	BootMajorVersion;		/* Boot Firmware version: xx. */
+	__u8	BootMinorVersion;		/*			  yy. */
+	__le16	BootBuildNumber;		/*			  zzzz (LE format) */
+
+	__u8	FirmwareMajorVersion;		/* Operational Firmware version:xx. */
+	__u8	FirmwareMinorVersion;		/*				yy. */
+	__le16	FirmwareBuildNumber;		/*				zzzz (LE format) */
+
+	__u8	ManufactureDescDate[3];		/* MM/DD/YY when descriptor template was compiled */
+	__u8	HardwareType;
+
+	__u8	iDownloadFile;			/* What to download to EPiC device */
+	__u8	EpicVer;			/* What version of EPiC spec this device supports */
+
+	struct edge_compatibility_bits Epic;
+};
+
+#endif
diff --git a/drivers/usb/serial/io_ionsp.h b/drivers/usb/serial/io_ionsp.h
new file mode 100644
index 000000000..db4fce815
--- /dev/null
+++ b/drivers/usb/serial/io_ionsp.h
@@ -0,0 +1,451 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/************************************************************************
+ *
+ *	IONSP.H		Definitions for I/O Networks Serial Protocol
+ *
+ *	Copyright (C) 1997-1998 Inside Out Networks, Inc.
+ *
+ *	These definitions are used by both kernel-mode driver and the
+ *	peripheral firmware and MUST be kept in sync.
+ *
+ ************************************************************************/
+
+/************************************************************************
+
+The data to and from all ports on the peripheral is multiplexed
+through a single endpoint pair (EP1 since it supports 64-byte
+MaxPacketSize). Therefore, the data, commands, and status for
+each port must be preceded by a short header identifying the
+destination port. The header also identifies the bytes that follow
+as data or as command/status info.
+
+Header format, first byte:
+
+    CLLLLPPP
+    --------
+    | |	 |------ Port Number:	0-7
+    | |--------- Length:	MSB bits of length
+    |----------- Data/Command:	0 = Data header
+				1 = Cmd / Status (Cmd if OUT, Status if IN)
+
+This gives 2 possible formats:
+
+
+    Data header:		0LLLLPPP	LLLLLLLL
+    ============
+
+    Where (LLLL,LLLLLLL) is 12-bit length of data that follows for
+    port number (PPP). The length is 0-based (0-FFF means 0-4095
+    bytes). The ~4K limit allows the host driver (which deals in
+    transfer requests instead of individual packets) to write a
+    large chunk of data in a single request. Note, however, that
+    the length must always be <= the current TxCredits for a given
+    port due to buffering limitations on the peripheral.
+
+
+    Cmd/Status header:		1ccccPPP	[ CCCCCCCC,	 Params ]...
+    ==================
+
+    Where (cccc) or (cccc,CCCCCCCC) is the cmd or status identifier.
+    Frequently-used values are encoded as (cccc), longer ones using
+    (cccc,CCCCCCCC). Subsequent bytes are optional parameters and are
+    specific to the cmd or status code. This may include a length
+    for command and status codes that need variable-length parameters.
+
+
+In addition, we use another interrupt pipe (endpoint) which the host polls
+periodically for flow control information. The peripheral, when there has
+been a change, sends the following 10-byte packet:
+
+	RRRRRRRRRRRRRRRR
+	T0T0T0T0T0T0T0T0
+	T1T1T1T1T1T1T1T1
+	T2T2T2T2T2T2T2T2
+	T3T3T3T3T3T3T3T3
+
+The first field is the 16-bit RxBytesAvail field, which indicates the
+number of bytes which may be read by the host from EP1. This is necessary:
+(a) because OSR2.1 has a bug which causes data loss if the peripheral returns
+fewer bytes than the host expects to read, and (b) because, on Microsoft
+platforms at least, an outstanding read posted on EP1 consumes about 35% of
+the CPU just polling the device for data.
+
+The next 4 fields are the 16-bit TxCredits for each port, which indicate how
+many bytes the host is allowed to send on EP1 for transmit to a given port.
+After an OPEN_PORT command, the Edgeport sends the initial TxCredits for that
+port.
+
+All 16-bit fields are sent in little-endian (Intel) format.
+
+************************************************************************/
+
+//
+// Define format of InterruptStatus packet returned from the
+// Interrupt pipe
+//
+
+struct int_status_pkt {
+	__u16 RxBytesAvail;			// Additional bytes available to
+						// be read from Bulk IN pipe
+	__u16 TxCredits[MAX_RS232_PORTS];	// Additional space available in
+						// given port's TxBuffer
+};
+
+
+#define GET_INT_STATUS_SIZE(NumPorts) (sizeof(__u16) + (sizeof(__u16) * (NumPorts)))
+
+
+
+//
+// Define cmd/status header values and macros to extract them.
+//
+//	Data:		0LLLLPPP LLLLLLLL
+//	Cmd/Stat:	1ccccPPP CCCCCCCC
+
+#define	IOSP_DATA_HDR_SIZE		2
+#define	IOSP_CMD_HDR_SIZE		2
+
+#define	IOSP_MAX_DATA_LENGTH		0x0FFF		// 12 bits -> 4K
+
+#define	IOSP_PORT_MASK			0x07		// Mask to isolate port number
+#define	IOSP_CMD_STAT_BIT		0x80		// If set, this is command/status header
+
+#define IS_CMD_STAT_HDR(Byte1)		((Byte1) & IOSP_CMD_STAT_BIT)
+#define IS_DATA_HDR(Byte1)		(!IS_CMD_STAT_HDR(Byte1))
+
+#define	IOSP_GET_HDR_PORT(Byte1)		((__u8) ((Byte1) & IOSP_PORT_MASK))
+#define	IOSP_GET_HDR_DATA_LEN(Byte1, Byte2)	((__u16) (((__u16)((Byte1) & 0x78)) << 5) | (Byte2))
+#define	IOSP_GET_STATUS_CODE(Byte1)		((__u8) (((Byte1) &  0x78) >> 3))
+
+
+//
+// These macros build the 1st and 2nd bytes for a data header
+//
+#define	IOSP_BUILD_DATA_HDR1(Port, Len)		((__u8) (((Port) | ((__u8) (((__u16) (Len)) >> 5) & 0x78))))
+#define	IOSP_BUILD_DATA_HDR2(Port, Len)		((__u8) (Len))
+
+
+//
+// These macros build the 1st and 2nd bytes for a command header
+//
+#define	IOSP_BUILD_CMD_HDR1(Port, Cmd)		((__u8) (IOSP_CMD_STAT_BIT | (Port) | ((__u8) ((Cmd) << 3))))
+
+
+//--------------------------------------------------------------
+//
+//	Define values for commands and command parameters
+//	(sent from Host to Edgeport)
+//
+//	1ccccPPP P1P1P1P1 [ P2P2P2P2P2 ]...
+//
+//	cccc:	00-07	2-byte commands. Write UART register 0-7 with
+//					value in P1. See 16650.H for definitions of
+//					UART register numbers and contents.
+//
+//		08-0B	3-byte commands:					==== P1 ====	==== P2 ====
+//					08	available for expansion
+//					09	1-param commands		Command Code	Param
+//					0A	available for expansion
+//					0B	available for expansion
+//
+//		0C-0D	4-byte commands.	P1 = extended cmd and P2,P3 = params
+//						Currently unimplemented.
+//
+//		0E-0F	N-byte commands:	P1 = num bytes after P1 (ie, TotalLen - 2)
+//						P2 = extended cmd, P3..Pn = parameters.
+//						Currently unimplemented.
+//
+
+#define	IOSP_WRITE_UART_REG(n)	((n) & 0x07)	// UartReg[ n ] := P1
+
+// Register numbers and contents
+// defined in 16554.H.
+
+//					0x08		// Available for expansion.
+#define	IOSP_EXT_CMD			0x09		// P1 = Command code (defined below)
+
+// P2 = Parameter
+
+//
+// Extended Command values, used with IOSP_EXT_CMD, may
+// or may not use parameter P2.
+//
+
+#define	IOSP_CMD_OPEN_PORT		0x00		// Enable ints, init UART. (NO PARAM)
+#define	IOSP_CMD_CLOSE_PORT		0x01		// Disable ints, flush buffers. (NO PARAM)
+#define	IOSP_CMD_CHASE_PORT		0x02		// Wait for Edgeport TX buffers to empty. (NO PARAM)
+#define IOSP_CMD_SET_RX_FLOW		0x03		// Set Rx Flow Control in Edgeport
+#define IOSP_CMD_SET_TX_FLOW		0x04		// Set Tx Flow Control in Edgeport
+#define IOSP_CMD_SET_XON_CHAR		0x05		// Set XON Character in Edgeport
+#define IOSP_CMD_SET_XOFF_CHAR		0x06		// Set XOFF Character in Edgeport
+#define IOSP_CMD_RX_CHECK_REQ		0x07		// Request Edgeport to insert a Checkpoint into
+
+// the receive data stream (Parameter = 1 byte sequence number)
+
+#define IOSP_CMD_SET_BREAK		0x08		// Turn on the BREAK (LCR bit 6)
+#define IOSP_CMD_CLEAR_BREAK		0x09		// Turn off the BREAK (LCR bit 6)
+
+
+//
+// Define macros to simplify building of IOSP cmds
+//
+
+#define MAKE_CMD_WRITE_REG(ppBuf, pLen, Port, Reg, Val)			\
+do {									\
+	(*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1((Port),			\
+					    IOSP_WRITE_UART_REG(Reg));	\
+	(*(ppBuf))[1] = (Val);						\
+									\
+	*ppBuf += 2;							\
+	*pLen  += 2;							\
+} while (0)
+
+#define MAKE_CMD_EXT_CMD(ppBuf, pLen, Port, ExtCmd, Param)		\
+do {									\
+	(*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1((Port), IOSP_EXT_CMD);	\
+	(*(ppBuf))[1] = (ExtCmd);					\
+	(*(ppBuf))[2] = (Param);					\
+									\
+	*ppBuf += 3;							\
+	*pLen  += 3;							\
+} while (0)
+
+
+
+//--------------------------------------------------------------
+//
+//	Define format of flow control commands
+//	(sent from Host to Edgeport)
+//
+//	11001PPP FlowCmd FlowTypes
+//
+//	Note that the 'FlowTypes' parameter is a bit mask; that is,
+//	more than one flow control type can be active at the same time.
+//	FlowTypes = 0 means 'no flow control'.
+//
+
+//
+//	IOSP_CMD_SET_RX_FLOW
+//
+//	Tells Edgeport how it can stop incoming UART data
+//
+//  Example for Port 0
+//	P0 = 11001000
+//  P1 = IOSP_CMD_SET_RX_FLOW
+//  P2 = Bit mask as follows:
+
+#define IOSP_RX_FLOW_RTS		0x01	// Edgeport drops RTS to stop incoming data
+#define IOSP_RX_FLOW_DTR		0x02	// Edgeport drops DTR to stop incoming data
+#define IOSP_RX_FLOW_DSR_SENSITIVITY	0x04	// Ignores Rx data unless DSR high
+
+// Not currently implemented by firmware.
+#define IOSP_RX_FLOW_XON_XOFF		0x08	// Edgeport sends XOFF char to stop incoming data.
+
+// Host must have previously programmed the
+// XON/XOFF values with SET_XON/SET_XOFF
+// before enabling this bit.
+
+//
+//	IOSP_CMD_SET_TX_FLOW
+//
+//	Tells Edgeport what signal(s) will stop it from transmitting UART data
+//
+//  Example for Port 0
+//	P0 = 11001000
+//  P1 = IOSP_CMD_SET_TX_FLOW
+//  P2 = Bit mask as follows:
+
+#define IOSP_TX_FLOW_CTS		0x01	// Edgeport stops Tx if CTS low
+#define IOSP_TX_FLOW_DSR		0x02	// Edgeport stops Tx if DSR low
+#define IOSP_TX_FLOW_DCD		0x04	// Edgeport stops Tx if DCD low
+#define IOSP_TX_FLOW_XON_XOFF		0x08	// Edgeport stops Tx upon receiving XOFF char.
+
+// Host must have previously programmed the
+// XON/XOFF values with SET_XON/SET_XOFF
+// before enabling this bit.
+#define IOSP_TX_FLOW_XOFF_CONTINUE	0x10	// If not set, Edgeport stops Tx when
+
+// sending XOFF in order to fix broken
+// systems that interpret the next
+// received char as XON.
+// If set, Edgeport continues Tx
+// normally after transmitting XOFF.
+// Not currently implemented by firmware.
+#define IOSP_TX_TOGGLE_RTS		0x20	// Edgeport drives RTS as a true half-duplex
+
+// Request-to-Send signal: it is raised before
+// beginning transmission and lowered after
+// the last Tx char leaves the UART.
+// Not currently implemented by firmware.
+
+//
+//	IOSP_CMD_SET_XON_CHAR
+//
+//	Sets the character which Edgeport transmits/interprets as XON.
+//	Note: This command MUST be sent before sending a SET_RX_FLOW or
+//	SET_TX_FLOW with the XON_XOFF bit set.
+//
+//  Example for Port 0
+//	P0 = 11001000
+//  P1 = IOSP_CMD_SET_XON_CHAR
+//  P2 = 0x11
+
+
+//
+//	IOSP_CMD_SET_XOFF_CHAR
+//
+//	Sets the character which Edgeport transmits/interprets as XOFF.
+//	Note: This command must be sent before sending a SET_RX_FLOW or
+//	SET_TX_FLOW with the XON_XOFF bit set.
+//
+//  Example for Port 0
+//	P0 = 11001000
+//  P1 = IOSP_CMD_SET_XOFF_CHAR
+//  P2 = 0x13
+
+
+//
+//	IOSP_CMD_RX_CHECK_REQ
+//
+//  This command is used to assist in the implementation of the
+//  IOCTL_SERIAL_PURGE Windows IOCTL.
+//  This IOSP command tries to place a marker at the end of the RX
+//  queue in the Edgeport. If the Edgeport RX queue is full then
+//  the Check will be discarded.
+//  It is up to the device driver to timeout waiting for the
+//  RX_CHECK_RSP.  If a RX_CHECK_RSP is received, the driver is
+//	sure that all data has been received from the edgeport and
+//	may now purge any internal RX buffers.
+//  Note tat the sequence numbers may be used to detect lost
+//  CHECK_REQs.
+
+//  Example for Port 0
+//	P0 = 11001000
+//  P1 = IOSP_CMD_RX_CHECK_REQ
+//  P2 = Sequence number
+
+
+//  Response will be:
+//  P1 = IOSP_EXT_RX_CHECK_RSP
+//  P2 = Request Sequence number
+
+
+
+//--------------------------------------------------------------
+//
+//	Define values for status and status parameters
+//	(received by Host from Edgeport)
+//
+//	1ssssPPP P1P1P1P1 [ P2P2P2P2P2 ]...
+//
+//	ssss:	00-07	2-byte status.	ssss identifies which UART register
+//					has changed value, and the new value is in P1.
+//					Note that the ssss values do not correspond to the
+//					16554 register numbers given in 16554.H. Instead,
+//					see below for definitions of the ssss numbers
+//					used in this status message.
+//
+//		08-0B	3-byte status:					==== P1 ====	==== P2 ====
+//					08	LSR_DATA:		New LSR		Errored byte
+//					09	1-param responses	Response Code	Param
+//					0A	OPEN_RSP:		InitialMsr	TxBufferSize
+//					0B	available for expansion
+//
+//		0C-0D	4-byte status.	P1 = extended status code and P2,P3 = params
+//					Not currently implemented.
+//
+//		0E-0F	N-byte status:	P1 = num bytes after P1 (ie, TotalLen - 2)
+//					P2 = extended status, P3..Pn = parameters.
+//					Not currently implemented.
+//
+
+/****************************************************
+ *	SSSS values for 2-byte status messages (0-8)
+ ****************************************************/
+
+#define	IOSP_STATUS_LSR			0x00	// P1 is new value of LSR register.
+
+// Bits defined in 16554.H. Edgeport
+// returns this in order to report
+// line status errors (overrun,
+// parity, framing, break). This form
+// is used when a errored receive data
+// character was NOT present in the
+// UART when the LSR error occurred
+// (ie, when LSR bit 0 = 0).
+
+#define	IOSP_STATUS_MSR			0x01	// P1 is new value of MSR register.
+
+// Bits defined in 16554.H. Edgeport
+// returns this in order to report
+// changes in modem status lines
+// (CTS, DSR, RI, CD)
+//
+
+//					0x02	// Available for future expansion
+//					0x03	//
+//					0x04	//
+//					0x05	//
+//					0x06	//
+//					0x07	//
+
+
+/****************************************************
+ *	SSSS values for 3-byte status messages (8-A)
+ ****************************************************/
+
+#define	IOSP_STATUS_LSR_DATA		0x08	// P1 is new value of LSR register (same as STATUS_LSR)
+
+// P2 is errored character read from
+//    RxFIFO after LSR reported an error.
+
+#define	IOSP_EXT_STATUS			0x09	// P1 is status/response code, param in P2.
+
+
+// Response Codes (P1 values) for 3-byte status messages
+
+#define	IOSP_EXT_STATUS_CHASE_RSP	0	// Reply to CHASE_PORT cmd. P2 is outcome:
+#define	IOSP_EXT_STATUS_CHASE_PASS	0	//	P2 = 0: All Tx data drained successfully
+#define	IOSP_EXT_STATUS_CHASE_FAIL	1	//	P2 = 1: Timed out (stuck due to flow
+
+//			control from remote device).
+
+#define	IOSP_EXT_STATUS_RX_CHECK_RSP	1	// Reply to RX_CHECK cmd. P2 is sequence number
+
+
+#define IOSP_STATUS_OPEN_RSP		0x0A	// Reply to OPEN_PORT cmd.
+
+// P1 is Initial MSR value
+// P2 is encoded TxBuffer Size:
+//	TxBufferSize = (P2 + 1) * 64
+
+//					0x0B	// Available for future expansion
+
+#define GET_TX_BUFFER_SIZE(P2) (((P2) + 1) * 64)
+
+
+
+
+/****************************************************
+ *	SSSS values for 4-byte status messages
+ ****************************************************/
+
+#define IOSP_EXT4_STATUS		0x0C	// Extended status code in P1,
+
+// Params in P2, P3
+// Currently unimplemented.
+
+//					0x0D	// Currently unused, available.
+
+
+
+//
+// Macros to parse status messages
+//
+
+#define	IOSP_GET_STATUS_LEN(code)	((code) < 8 ? 2 : ((code) < 0x0A ? 3 : 4))
+
+#define	IOSP_STATUS_IS_2BYTE(code)	((code) < 0x08)
+#define	IOSP_STATUS_IS_3BYTE(code)	(((code) >= 0x08) && ((code) <= 0x0B))
+#define	IOSP_STATUS_IS_4BYTE(code)	(((code) >= 0x0C) && ((code) <= 0x0D))
+
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
new file mode 100644
index 000000000..bc3c24ea4
--- /dev/null
+++ b/drivers/usb/serial/io_ti.c
@@ -0,0 +1,2758 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Edgeport USB Serial Converter driver
+ *
+ * Copyright (C) 2000-2002 Inside Out Networks, All rights reserved.
+ * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
+ *
+ * Supports the following devices:
+ *	EP/1 EP/2 EP/4 EP/21 EP/22 EP/221 EP/42 EP/421 WATCHPORT
+ *
+ * For questions or problems with this driver, contact Inside Out
+ * Networks technical support, or Peter Berger <pberger@brimson.com>,
+ * or Al Borchers <alborchers@steinerpoint.com>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/serial.h>
+#include <linux/swab.h>
+#include <linux/kfifo.h>
+#include <linux/ioctl.h>
+#include <linux/firmware.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#include "io_16654.h"
+#include "io_usbvend.h"
+#include "io_ti.h"
+
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli"
+#define DRIVER_DESC "Edgeport USB Serial Driver"
+
+#define EPROM_PAGE_SIZE		64
+
+
+/* different hardware types */
+#define HARDWARE_TYPE_930	0
+#define HARDWARE_TYPE_TIUMP	1
+
+/* IOCTL_PRIVATE_TI_GET_MODE Definitions */
+#define	TI_MODE_CONFIGURING	0   /* Device has not entered start device */
+#define	TI_MODE_BOOT		1   /* Staying in boot mode		   */
+#define TI_MODE_DOWNLOAD	2   /* Made it to download mode		   */
+#define TI_MODE_TRANSITIONING	3   /*
+				     * Currently in boot mode but
+				     * transitioning to download mode
+				     */
+
+/* read urb state */
+#define EDGE_READ_URB_RUNNING	0
+#define EDGE_READ_URB_STOPPING	1
+#define EDGE_READ_URB_STOPPED	2
+
+
+/* Product information read from the Edgeport */
+struct product_info {
+	int	TiMode;			/* Current TI Mode  */
+	u8	hardware_type;		/* Type of hardware */
+} __packed;
+
+/*
+ * Edgeport firmware header
+ *
+ * "build_number" has been set to 0 in all three of the images I have
+ * seen, and Digi Tech Support suggests that it is safe to ignore it.
+ *
+ * "length" is the number of bytes of actual data following the header.
+ *
+ * "checksum" is the low order byte resulting from adding the values of
+ * all the data bytes.
+ */
+struct edgeport_fw_hdr {
+	u8 major_version;
+	u8 minor_version;
+	__le16 build_number;
+	__le16 length;
+	u8 checksum;
+} __packed;
+
+struct edgeport_port {
+	u16 uart_base;
+	u16 dma_address;
+	u8 shadow_msr;
+	u8 shadow_mcr;
+	u8 shadow_lsr;
+	u8 lsr_mask;
+	u32 ump_read_timeout;		/*
+					 * Number of milliseconds the UMP will
+					 * wait without data before completing
+					 * a read short
+					 */
+	int baud_rate;
+	int close_pending;
+	int lsr_event;
+
+	struct edgeport_serial	*edge_serial;
+	struct usb_serial_port	*port;
+	u8 bUartMode;		/* Port type, 0: RS232, etc. */
+	spinlock_t ep_lock;
+	int ep_read_urb_state;
+	int ep_write_urb_in_use;
+};
+
+struct edgeport_serial {
+	struct product_info product_info;
+	u8 TI_I2C_Type;			/* Type of I2C in UMP */
+	u8 TiReadI2C;			/*
+					 * Set to TRUE if we have read the
+					 * I2c in Boot Mode
+					 */
+	struct mutex es_lock;
+	int num_ports_open;
+	struct usb_serial *serial;
+	struct delayed_work heartbeat_work;
+	int fw_version;
+	bool use_heartbeat;
+};
+
+
+/* Devices that this driver supports */
+static const struct usb_device_id edgeport_1port_id_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROXIMITY) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOTION) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOISTURE) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_TEMPERATURE) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_HUMIDITY) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_POWER) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_LIGHT) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_RADIATION) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_DISTANCE) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_ACCELERATION) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROX_DIST) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_HP4CD) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_PCI) },
+	{ }
+};
+
+static const struct usb_device_id edgeport_2port_id_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_421) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_42) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_221C) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22C) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21C) },
+	/* The 4, 8 and 16 port devices show up as multiple 2 port devices */
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4S) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8S) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416B) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_E5805A) },
+	{ }
+};
+
+/* Devices that this driver supports */
+static const struct usb_device_id id_table_combined[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROXIMITY) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOTION) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOISTURE) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_TEMPERATURE) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_HUMIDITY) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_POWER) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_LIGHT) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_RADIATION) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_DISTANCE) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_ACCELERATION) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROX_DIST) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_HP4CD) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_PCI) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_421) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_42) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_221C) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22C) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21C) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4S) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8S) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416B) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_E5805A) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, id_table_combined);
+
+static bool ignore_cpu_rev;
+static int default_uart_mode;		/* RS232 */
+
+static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data,
+		int length);
+
+static void stop_read(struct edgeport_port *edge_port);
+static int restart_read(struct edgeport_port *edge_port);
+
+static void edge_set_termios(struct tty_struct *tty,
+			     struct usb_serial_port *port,
+			     const struct ktermios *old_termios);
+static void edge_send(struct usb_serial_port *port, struct tty_struct *tty);
+
+static int do_download_mode(struct edgeport_serial *serial,
+		const struct firmware *fw);
+static int do_boot_mode(struct edgeport_serial *serial,
+		const struct firmware *fw);
+
+/* sysfs attributes */
+static int edge_create_sysfs_attrs(struct usb_serial_port *port);
+static int edge_remove_sysfs_attrs(struct usb_serial_port *port);
+
+/*
+ * Some release of Edgeport firmware "down3.bin" after version 4.80
+ * introduced code to automatically disconnect idle devices on some
+ * Edgeport models after periods of inactivity, typically ~60 seconds.
+ * This occurs without regard to whether ports on the device are open
+ * or not.  Digi International Tech Support suggested:
+ *
+ * 1.  Adding driver "heartbeat" code to reset the firmware timer by
+ *     requesting a descriptor record every 15 seconds, which should be
+ *     effective with newer firmware versions that require it, and benign
+ *     with older versions that do not. In practice 40 seconds seems often
+ *     enough.
+ * 2.  The heartbeat code is currently required only on Edgeport/416 models.
+ */
+#define FW_HEARTBEAT_VERSION_CUTOFF ((4 << 8) + 80)
+#define FW_HEARTBEAT_SECS 40
+
+/* Timeouts in msecs: firmware downloads take longer */
+#define TI_VSEND_TIMEOUT_DEFAULT 1000
+#define TI_VSEND_TIMEOUT_FW_DOWNLOAD 10000
+
+static int ti_vread_sync(struct usb_device *dev, u8 request, u16 value,
+		u16 index, void *data, int size)
+{
+	int status;
+
+	status = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
+			(USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN),
+			value, index, data, size, 1000);
+	if (status < 0)
+		return status;
+	if (status != size) {
+		dev_dbg(&dev->dev, "%s - wanted to read %d, but only read %d\n",
+			__func__, size, status);
+		return -ECOMM;
+	}
+	return 0;
+}
+
+static int ti_vsend_sync(struct usb_device *dev, u8 request, u16 value,
+		u16 index, void *data, int size, int timeout)
+{
+	int status;
+
+	status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
+			(USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
+			value, index, data, size, timeout);
+	if (status < 0)
+		return status;
+
+	return 0;
+}
+
+static int read_port_cmd(struct usb_serial_port *port, u8 command, u16 value,
+		void *data, int size)
+{
+	return ti_vread_sync(port->serial->dev, command, value,
+			UMPM_UART1_PORT + port->port_number,
+			data, size);
+}
+
+static int send_port_cmd(struct usb_serial_port *port, u8 command, u16 value,
+		void *data, int size)
+{
+	return ti_vsend_sync(port->serial->dev, command, value,
+			UMPM_UART1_PORT + port->port_number,
+			data, size, TI_VSEND_TIMEOUT_DEFAULT);
+}
+
+/* clear tx/rx buffers and fifo in TI UMP */
+static int purge_port(struct usb_serial_port *port, u16 mask)
+{
+	int port_number = port->port_number;
+
+	dev_dbg(&port->dev, "%s - port %d, mask %x\n", __func__, port_number, mask);
+
+	return send_port_cmd(port, UMPC_PURGE_PORT, mask, NULL, 0);
+}
+
+/**
+ * read_download_mem - Read edgeport memory from TI chip
+ * @dev: usb device pointer
+ * @start_address: Device CPU address at which to read
+ * @length: Length of above data
+ * @address_type: Can read both XDATA and I2C
+ * @buffer: pointer to input data buffer
+ */
+static int read_download_mem(struct usb_device *dev, int start_address,
+				int length, u8 address_type, u8 *buffer)
+{
+	int status = 0;
+	u8 read_length;
+	u16 be_start_address;
+
+	dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length);
+
+	/*
+	 * Read in blocks of 64 bytes
+	 * (TI firmware can't handle more than 64 byte reads)
+	 */
+	while (length) {
+		if (length > 64)
+			read_length = 64;
+		else
+			read_length = (u8)length;
+
+		if (read_length > 1) {
+			dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, read_length);
+		}
+		/*
+		 * NOTE: Must use swab as wIndex is sent in little-endian
+		 *       byte order regardless of host byte order.
+		 */
+		be_start_address = swab16((u16)start_address);
+		status = ti_vread_sync(dev, UMPC_MEMORY_READ,
+					(u16)address_type,
+					be_start_address,
+					buffer, read_length);
+
+		if (status) {
+			dev_dbg(&dev->dev, "%s - ERROR %x\n", __func__, status);
+			return status;
+		}
+
+		if (read_length > 1)
+			usb_serial_debug_data(&dev->dev, __func__, read_length, buffer);
+
+		/* Update pointers/length */
+		start_address += read_length;
+		buffer += read_length;
+		length -= read_length;
+	}
+
+	return status;
+}
+
+static int read_ram(struct usb_device *dev, int start_address,
+						int length, u8 *buffer)
+{
+	return read_download_mem(dev, start_address, length,
+					DTK_ADDR_SPACE_XDATA, buffer);
+}
+
+/* Read edgeport memory to a given block */
+static int read_boot_mem(struct edgeport_serial *serial,
+				int start_address, int length, u8 *buffer)
+{
+	int status = 0;
+	int i;
+
+	for (i = 0; i < length; i++) {
+		status = ti_vread_sync(serial->serial->dev,
+				UMPC_MEMORY_READ, serial->TI_I2C_Type,
+				(u16)(start_address+i), &buffer[i], 0x01);
+		if (status) {
+			dev_dbg(&serial->serial->dev->dev, "%s - ERROR %x\n", __func__, status);
+			return status;
+		}
+	}
+
+	dev_dbg(&serial->serial->dev->dev, "%s - start_address = %x, length = %d\n",
+		__func__, start_address, length);
+	usb_serial_debug_data(&serial->serial->dev->dev, __func__, length, buffer);
+
+	serial->TiReadI2C = 1;
+
+	return status;
+}
+
+/* Write given block to TI EPROM memory */
+static int write_boot_mem(struct edgeport_serial *serial,
+				int start_address, int length, u8 *buffer)
+{
+	int status = 0;
+	int i;
+	u8 *temp;
+
+	/* Must do a read before write */
+	if (!serial->TiReadI2C) {
+		temp = kmalloc(1, GFP_KERNEL);
+		if (!temp)
+			return -ENOMEM;
+
+		status = read_boot_mem(serial, 0, 1, temp);
+		kfree(temp);
+		if (status)
+			return status;
+	}
+
+	for (i = 0; i < length; ++i) {
+		status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
+				buffer[i], (u16)(i + start_address), NULL,
+				0, TI_VSEND_TIMEOUT_DEFAULT);
+		if (status)
+			return status;
+	}
+
+	dev_dbg(&serial->serial->dev->dev, "%s - start_sddr = %x, length = %d\n", __func__, start_address, length);
+	usb_serial_debug_data(&serial->serial->dev->dev, __func__, length, buffer);
+
+	return status;
+}
+
+/* Write edgeport I2C memory to TI chip	*/
+static int write_i2c_mem(struct edgeport_serial *serial,
+		int start_address, int length, u8 address_type, u8 *buffer)
+{
+	struct device *dev = &serial->serial->dev->dev;
+	int status = 0;
+	int write_length;
+	u16 be_start_address;
+
+	/* We can only send a maximum of 1 aligned byte page at a time */
+
+	/* calculate the number of bytes left in the first page */
+	write_length = EPROM_PAGE_SIZE -
+				(start_address & (EPROM_PAGE_SIZE - 1));
+
+	if (write_length > length)
+		write_length = length;
+
+	dev_dbg(dev, "%s - BytesInFirstPage Addr = %x, length = %d\n",
+		__func__, start_address, write_length);
+	usb_serial_debug_data(dev, __func__, write_length, buffer);
+
+	/*
+	 * Write first page.
+	 *
+	 * NOTE: Must use swab as wIndex is sent in little-endian byte order
+	 *       regardless of host byte order.
+	 */
+	be_start_address = swab16((u16)start_address);
+	status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
+				(u16)address_type, be_start_address,
+				buffer,	write_length, TI_VSEND_TIMEOUT_DEFAULT);
+	if (status) {
+		dev_dbg(dev, "%s - ERROR %d\n", __func__, status);
+		return status;
+	}
+
+	length		-= write_length;
+	start_address	+= write_length;
+	buffer		+= write_length;
+
+	/*
+	 * We should be aligned now -- can write max page size bytes at a
+	 * time.
+	 */
+	while (length) {
+		if (length > EPROM_PAGE_SIZE)
+			write_length = EPROM_PAGE_SIZE;
+		else
+			write_length = length;
+
+		dev_dbg(dev, "%s - Page Write Addr = %x, length = %d\n",
+			__func__, start_address, write_length);
+		usb_serial_debug_data(dev, __func__, write_length, buffer);
+
+		/*
+		 * Write next page.
+		 *
+		 * NOTE: Must use swab as wIndex is sent in little-endian byte
+		 *       order regardless of host byte order.
+		 */
+		be_start_address = swab16((u16)start_address);
+		status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
+				(u16)address_type, be_start_address, buffer,
+				write_length, TI_VSEND_TIMEOUT_DEFAULT);
+		if (status) {
+			dev_err(dev, "%s - ERROR %d\n", __func__, status);
+			return status;
+		}
+
+		length		-= write_length;
+		start_address	+= write_length;
+		buffer		+= write_length;
+	}
+	return status;
+}
+
+/*
+ * Examine the UMP DMA registers and LSR
+ *
+ * Check the MSBit of the X and Y DMA byte count registers.
+ * A zero in this bit indicates that the TX DMA buffers are empty
+ * then check the TX Empty bit in the UART.
+ */
+static int tx_active(struct edgeport_port *port)
+{
+	int status;
+	struct out_endpoint_desc_block *oedb;
+	u8 *lsr;
+	int bytes_left = 0;
+
+	oedb = kmalloc(sizeof(*oedb), GFP_KERNEL);
+	if (!oedb)
+		return -ENOMEM;
+
+	/*
+	 * Sigh, that's right, just one byte, as not all platforms can
+	 * do DMA from stack
+	 */
+	lsr = kmalloc(1, GFP_KERNEL);
+	if (!lsr) {
+		kfree(oedb);
+		return -ENOMEM;
+	}
+	/* Read the DMA Count Registers */
+	status = read_ram(port->port->serial->dev, port->dma_address,
+						sizeof(*oedb), (void *)oedb);
+	if (status)
+		goto exit_is_tx_active;
+
+	dev_dbg(&port->port->dev, "%s - XByteCount    0x%X\n", __func__, oedb->XByteCount);
+
+	/* and the LSR */
+	status = read_ram(port->port->serial->dev,
+			port->uart_base + UMPMEM_OFFS_UART_LSR, 1, lsr);
+
+	if (status)
+		goto exit_is_tx_active;
+	dev_dbg(&port->port->dev, "%s - LSR = 0x%X\n", __func__, *lsr);
+
+	/* If either buffer has data or we are transmitting then return TRUE */
+	if ((oedb->XByteCount & 0x80) != 0)
+		bytes_left += 64;
+
+	if ((*lsr & UMP_UART_LSR_TX_MASK) == 0)
+		bytes_left += 1;
+
+	/* We return Not Active if we get any kind of error */
+exit_is_tx_active:
+	dev_dbg(&port->port->dev, "%s - return %d\n", __func__, bytes_left);
+
+	kfree(lsr);
+	kfree(oedb);
+	return bytes_left;
+}
+
+static int choose_config(struct usb_device *dev)
+{
+	/*
+	 * There may be multiple configurations on this device, in which case
+	 * we would need to read and parse all of them to find out which one
+	 * we want. However, we just support one config at this point,
+	 * configuration # 1, which is Config Descriptor 0.
+	 */
+
+	dev_dbg(&dev->dev, "%s - Number of Interfaces = %d\n",
+		__func__, dev->config->desc.bNumInterfaces);
+	dev_dbg(&dev->dev, "%s - MAX Power            = %d\n",
+		__func__, dev->config->desc.bMaxPower * 2);
+
+	if (dev->config->desc.bNumInterfaces != 1) {
+		dev_err(&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __func__);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int read_rom(struct edgeport_serial *serial,
+				int start_address, int length, u8 *buffer)
+{
+	int status;
+
+	if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) {
+		status = read_download_mem(serial->serial->dev,
+					       start_address,
+					       length,
+					       serial->TI_I2C_Type,
+					       buffer);
+	} else {
+		status = read_boot_mem(serial, start_address, length,
+								buffer);
+	}
+	return status;
+}
+
+static int write_rom(struct edgeport_serial *serial, int start_address,
+						int length, u8 *buffer)
+{
+	if (serial->product_info.TiMode == TI_MODE_BOOT)
+		return write_boot_mem(serial, start_address, length,
+								buffer);
+
+	if (serial->product_info.TiMode == TI_MODE_DOWNLOAD)
+		return write_i2c_mem(serial, start_address, length,
+						serial->TI_I2C_Type, buffer);
+	return -EINVAL;
+}
+
+/* Read a descriptor header from I2C based on type */
+static int get_descriptor_addr(struct edgeport_serial *serial,
+				int desc_type, struct ti_i2c_desc *rom_desc)
+{
+	int start_address;
+	int status;
+
+	/* Search for requested descriptor in I2C */
+	start_address = 2;
+	do {
+		status = read_rom(serial,
+				   start_address,
+				   sizeof(struct ti_i2c_desc),
+				   (u8 *)rom_desc);
+		if (status)
+			return 0;
+
+		if (rom_desc->Type == desc_type)
+			return start_address;
+
+		start_address = start_address + sizeof(struct ti_i2c_desc) +
+						le16_to_cpu(rom_desc->Size);
+
+	} while ((start_address < TI_MAX_I2C_SIZE) && rom_desc->Type);
+
+	return 0;
+}
+
+/* Validate descriptor checksum */
+static int valid_csum(struct ti_i2c_desc *rom_desc, u8 *buffer)
+{
+	u16 i;
+	u8 cs = 0;
+
+	for (i = 0; i < le16_to_cpu(rom_desc->Size); i++)
+		cs = (u8)(cs + buffer[i]);
+
+	if (cs != rom_desc->CheckSum) {
+		pr_debug("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/* Make sure that the I2C image is good */
+static int check_i2c_image(struct edgeport_serial *serial)
+{
+	struct device *dev = &serial->serial->dev->dev;
+	int status = 0;
+	struct ti_i2c_desc *rom_desc;
+	int start_address = 2;
+	u8 *buffer;
+	u16 ttype;
+
+	rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
+	if (!rom_desc)
+		return -ENOMEM;
+
+	buffer = kmalloc(TI_MAX_I2C_SIZE, GFP_KERNEL);
+	if (!buffer) {
+		kfree(rom_desc);
+		return -ENOMEM;
+	}
+
+	/* Read the first byte (Signature0) must be 0x52 or 0x10 */
+	status = read_rom(serial, 0, 1, buffer);
+	if (status)
+		goto out;
+
+	if (*buffer != UMP5152 && *buffer != UMP3410) {
+		dev_err(dev, "%s - invalid buffer signature\n", __func__);
+		status = -ENODEV;
+		goto out;
+	}
+
+	do {
+		/* Validate the I2C */
+		status = read_rom(serial,
+				start_address,
+				sizeof(struct ti_i2c_desc),
+				(u8 *)rom_desc);
+		if (status)
+			break;
+
+		if ((start_address + sizeof(struct ti_i2c_desc) +
+			le16_to_cpu(rom_desc->Size)) > TI_MAX_I2C_SIZE) {
+			status = -ENODEV;
+			dev_dbg(dev, "%s - structure too big, erroring out.\n", __func__);
+			break;
+		}
+
+		dev_dbg(dev, "%s Type = 0x%x\n", __func__, rom_desc->Type);
+
+		/* Skip type 2 record */
+		ttype = rom_desc->Type & 0x0f;
+		if (ttype != I2C_DESC_TYPE_FIRMWARE_BASIC
+			&& ttype != I2C_DESC_TYPE_FIRMWARE_AUTO) {
+			/* Read the descriptor data */
+			status = read_rom(serial, start_address +
+						sizeof(struct ti_i2c_desc),
+						le16_to_cpu(rom_desc->Size),
+						buffer);
+			if (status)
+				break;
+
+			status = valid_csum(rom_desc, buffer);
+			if (status)
+				break;
+		}
+		start_address = start_address + sizeof(struct ti_i2c_desc) +
+						le16_to_cpu(rom_desc->Size);
+
+	} while ((rom_desc->Type != I2C_DESC_TYPE_ION) &&
+				(start_address < TI_MAX_I2C_SIZE));
+
+	if ((rom_desc->Type != I2C_DESC_TYPE_ION) ||
+				(start_address > TI_MAX_I2C_SIZE))
+		status = -ENODEV;
+
+out:
+	kfree(buffer);
+	kfree(rom_desc);
+	return status;
+}
+
+static int get_manuf_info(struct edgeport_serial *serial, u8 *buffer)
+{
+	int status;
+	int start_address;
+	struct ti_i2c_desc *rom_desc;
+	struct edge_ti_manuf_descriptor *desc;
+	struct device *dev = &serial->serial->dev->dev;
+
+	rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
+	if (!rom_desc)
+		return -ENOMEM;
+
+	start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_ION,
+								rom_desc);
+
+	if (!start_address) {
+		dev_dbg(dev, "%s - Edge Descriptor not found in I2C\n", __func__);
+		status = -ENODEV;
+		goto exit;
+	}
+
+	/* Read the descriptor data */
+	status = read_rom(serial, start_address+sizeof(struct ti_i2c_desc),
+					le16_to_cpu(rom_desc->Size), buffer);
+	if (status)
+		goto exit;
+
+	status = valid_csum(rom_desc, buffer);
+
+	desc = (struct edge_ti_manuf_descriptor *)buffer;
+	dev_dbg(dev, "%s - IonConfig      0x%x\n", __func__, desc->IonConfig);
+	dev_dbg(dev, "%s - Version          %d\n", __func__, desc->Version);
+	dev_dbg(dev, "%s - Cpu/Board      0x%x\n", __func__, desc->CpuRev_BoardRev);
+	dev_dbg(dev, "%s - NumPorts         %d\n", __func__, desc->NumPorts);
+	dev_dbg(dev, "%s - NumVirtualPorts  %d\n", __func__, desc->NumVirtualPorts);
+	dev_dbg(dev, "%s - TotalPorts       %d\n", __func__, desc->TotalPorts);
+
+exit:
+	kfree(rom_desc);
+	return status;
+}
+
+/* Build firmware header used for firmware update */
+static int build_i2c_fw_hdr(u8 *header, const struct firmware *fw)
+{
+	u8 *buffer;
+	int buffer_size;
+	int i;
+	u8 cs = 0;
+	struct ti_i2c_desc *i2c_header;
+	struct ti_i2c_image_header *img_header;
+	struct ti_i2c_firmware_rec *firmware_rec;
+	struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data;
+
+	/*
+	 * In order to update the I2C firmware we must change the type 2 record
+	 * to type 0xF2.  This will force the UMP to come up in Boot Mode.
+	 * Then while in boot mode, the driver will download the latest
+	 * firmware (padded to 15.5k) into the UMP ram.  And finally when the
+	 * device comes back up in download mode the driver will cause the new
+	 * firmware to be copied from the UMP Ram to I2C and the firmware will
+	 * update the record type from 0xf2 to 0x02.
+	 */
+
+	/*
+	 * Allocate a 15.5k buffer + 2 bytes for version number (Firmware
+	 * Record)
+	 */
+	buffer_size = (((1024 * 16) - 512 ) +
+			sizeof(struct ti_i2c_firmware_rec));
+
+	buffer = kmalloc(buffer_size, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	/* Set entire image of 0xffs */
+	memset(buffer, 0xff, buffer_size);
+
+	/* Copy version number into firmware record */
+	firmware_rec = (struct ti_i2c_firmware_rec *)buffer;
+
+	firmware_rec->Ver_Major	= fw_hdr->major_version;
+	firmware_rec->Ver_Minor	= fw_hdr->minor_version;
+
+	/* Pointer to fw_down memory image */
+	img_header = (struct ti_i2c_image_header *)&fw->data[4];
+
+	memcpy(buffer + sizeof(struct ti_i2c_firmware_rec),
+		&fw->data[4 + sizeof(struct ti_i2c_image_header)],
+		le16_to_cpu(img_header->Length));
+
+	for (i=0; i < buffer_size; i++) {
+		cs = (u8)(cs + buffer[i]);
+	}
+
+	kfree(buffer);
+
+	/* Build new header */
+	i2c_header =  (struct ti_i2c_desc *)header;
+	firmware_rec =  (struct ti_i2c_firmware_rec*)i2c_header->Data;
+
+	i2c_header->Type	= I2C_DESC_TYPE_FIRMWARE_BLANK;
+	i2c_header->Size	= cpu_to_le16(buffer_size);
+	i2c_header->CheckSum	= cs;
+	firmware_rec->Ver_Major	= fw_hdr->major_version;
+	firmware_rec->Ver_Minor	= fw_hdr->minor_version;
+
+	return 0;
+}
+
+/* Try to figure out what type of I2c we have */
+static int i2c_type_bootmode(struct edgeport_serial *serial)
+{
+	struct device *dev = &serial->serial->dev->dev;
+	int status;
+	u8 *data;
+
+	data = kmalloc(1, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	/* Try to read type 2 */
+	status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
+				DTK_ADDR_SPACE_I2C_TYPE_II, 0, data, 0x01);
+	if (status)
+		dev_dbg(dev, "%s - read 2 status error = %d\n", __func__, status);
+	else
+		dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data);
+	if ((!status) && (*data == UMP5152 || *data == UMP3410)) {
+		dev_dbg(dev, "%s - ROM_TYPE_II\n", __func__);
+		serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
+		goto out;
+	}
+
+	/* Try to read type 3 */
+	status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
+				DTK_ADDR_SPACE_I2C_TYPE_III, 0,	data, 0x01);
+	if (status)
+		dev_dbg(dev, "%s - read 3 status error = %d\n", __func__, status);
+	else
+		dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data);
+	if ((!status) && (*data == UMP5152 || *data == UMP3410)) {
+		dev_dbg(dev, "%s - ROM_TYPE_III\n", __func__);
+		serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III;
+		goto out;
+	}
+
+	dev_dbg(dev, "%s - Unknown\n", __func__);
+	serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
+	status = -ENODEV;
+out:
+	kfree(data);
+	return status;
+}
+
+static int bulk_xfer(struct usb_serial *serial, void *buffer,
+						int length, int *num_sent)
+{
+	int status;
+
+	status = usb_bulk_msg(serial->dev,
+			usb_sndbulkpipe(serial->dev,
+				serial->port[0]->bulk_out_endpointAddress),
+			buffer, length, num_sent, 1000);
+	return status;
+}
+
+/* Download given firmware image to the device (IN BOOT MODE) */
+static int download_code(struct edgeport_serial *serial, u8 *image,
+							int image_length)
+{
+	int status = 0;
+	int pos;
+	int transfer;
+	int done;
+
+	/* Transfer firmware image */
+	for (pos = 0; pos < image_length; ) {
+		/* Read the next buffer from file */
+		transfer = image_length - pos;
+		if (transfer > EDGE_FW_BULK_MAX_PACKET_SIZE)
+			transfer = EDGE_FW_BULK_MAX_PACKET_SIZE;
+
+		/* Transfer data */
+		status = bulk_xfer(serial->serial, &image[pos],
+							transfer, &done);
+		if (status)
+			break;
+		/* Advance buffer pointer */
+		pos += done;
+	}
+
+	return status;
+}
+
+/* FIXME!!! */
+static int config_boot_dev(struct usb_device *dev)
+{
+	return 0;
+}
+
+static int ti_cpu_rev(struct edge_ti_manuf_descriptor *desc)
+{
+	return TI_GET_CPU_REVISION(desc->CpuRev_BoardRev);
+}
+
+static int check_fw_sanity(struct edgeport_serial *serial,
+		const struct firmware *fw)
+{
+	u16 length_total;
+	u8 checksum = 0;
+	int pos;
+	struct device *dev = &serial->serial->interface->dev;
+	struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data;
+
+	if (fw->size < sizeof(struct edgeport_fw_hdr)) {
+		dev_err(dev, "incomplete fw header\n");
+		return -EINVAL;
+	}
+
+	length_total = le16_to_cpu(fw_hdr->length) +
+			sizeof(struct edgeport_fw_hdr);
+
+	if (fw->size != length_total) {
+		dev_err(dev, "bad fw size (expected: %u, got: %zu)\n",
+				length_total, fw->size);
+		return -EINVAL;
+	}
+
+	for (pos = sizeof(struct edgeport_fw_hdr); pos < fw->size; ++pos)
+		checksum += fw->data[pos];
+
+	if (checksum != fw_hdr->checksum) {
+		dev_err(dev, "bad fw checksum (expected: 0x%x, got: 0x%x)\n",
+				fw_hdr->checksum, checksum);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * DownloadTIFirmware - Download run-time operating firmware to the TI5052
+ *
+ * This routine downloads the main operating code into the TI5052, using the
+ * boot code already burned into E2PROM or ROM.
+ */
+static int download_fw(struct edgeport_serial *serial)
+{
+	struct device *dev = &serial->serial->interface->dev;
+	int status = 0;
+	struct usb_interface_descriptor *interface;
+	const struct firmware *fw;
+	const char *fw_name = "edgeport/down3.bin";
+	struct edgeport_fw_hdr *fw_hdr;
+
+	status = request_firmware(&fw, fw_name, dev);
+	if (status) {
+		dev_err(dev, "Failed to load image \"%s\" err %d\n",
+				fw_name, status);
+		return status;
+	}
+
+	if (check_fw_sanity(serial, fw)) {
+		status = -EINVAL;
+		goto out;
+	}
+
+	fw_hdr = (struct edgeport_fw_hdr *)fw->data;
+
+	/* If on-board version is newer, "fw_version" will be updated later. */
+	serial->fw_version = (fw_hdr->major_version << 8) +
+			fw_hdr->minor_version;
+
+	/*
+	 * This routine is entered by both the BOOT mode and the Download mode
+	 * We can determine which code is running by the reading the config
+	 * descriptor and if we have only one bulk pipe it is in boot mode
+	 */
+	serial->product_info.hardware_type = HARDWARE_TYPE_TIUMP;
+
+	/* Default to type 2 i2c */
+	serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
+
+	status = choose_config(serial->serial->dev);
+	if (status)
+		goto out;
+
+	interface = &serial->serial->interface->cur_altsetting->desc;
+	if (!interface) {
+		dev_err(dev, "%s - no interface set, error!\n", __func__);
+		status = -ENODEV;
+		goto out;
+	}
+
+	/*
+	 * Setup initial mode -- the default mode 0 is TI_MODE_CONFIGURING
+	 * if we have more than one endpoint we are definitely in download
+	 * mode
+	 */
+	if (interface->bNumEndpoints > 1) {
+		serial->product_info.TiMode = TI_MODE_DOWNLOAD;
+		status = do_download_mode(serial, fw);
+	} else {
+		/* Otherwise we will remain in configuring mode */
+		serial->product_info.TiMode = TI_MODE_CONFIGURING;
+		status = do_boot_mode(serial, fw);
+	}
+
+out:
+	release_firmware(fw);
+	return status;
+}
+
+static int do_download_mode(struct edgeport_serial *serial,
+		const struct firmware *fw)
+{
+	struct device *dev = &serial->serial->interface->dev;
+	int status = 0;
+	int start_address;
+	struct edge_ti_manuf_descriptor *ti_manuf_desc;
+	int download_cur_ver;
+	int download_new_ver;
+	struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data;
+	struct ti_i2c_desc *rom_desc;
+
+	dev_dbg(dev, "%s - RUNNING IN DOWNLOAD MODE\n", __func__);
+
+	status = check_i2c_image(serial);
+	if (status) {
+		dev_dbg(dev, "%s - DOWNLOAD MODE -- BAD I2C\n", __func__);
+		return status;
+	}
+
+	/*
+	 * Validate Hardware version number
+	 * Read Manufacturing Descriptor from TI Based Edgeport
+	 */
+	ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
+	if (!ti_manuf_desc)
+		return -ENOMEM;
+
+	status = get_manuf_info(serial, (u8 *)ti_manuf_desc);
+	if (status) {
+		kfree(ti_manuf_desc);
+		return status;
+	}
+
+	/* Check version number of ION descriptor */
+	if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) {
+		dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n",
+			__func__, ti_cpu_rev(ti_manuf_desc));
+		kfree(ti_manuf_desc);
+		return -EINVAL;
+	}
+
+	rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
+	if (!rom_desc) {
+		kfree(ti_manuf_desc);
+		return -ENOMEM;
+	}
+
+	/* Search for type 2 record (firmware record) */
+	start_address = get_descriptor_addr(serial,
+			I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc);
+	if (start_address != 0) {
+		struct ti_i2c_firmware_rec *firmware_version;
+		u8 *record;
+
+		dev_dbg(dev, "%s - Found Type FIRMWARE (Type 2) record\n",
+				__func__);
+
+		firmware_version = kmalloc(sizeof(*firmware_version),
+							GFP_KERNEL);
+		if (!firmware_version) {
+			kfree(rom_desc);
+			kfree(ti_manuf_desc);
+			return -ENOMEM;
+		}
+
+		/*
+		 * Validate version number
+		 * Read the descriptor data
+		 */
+		status = read_rom(serial, start_address +
+				sizeof(struct ti_i2c_desc),
+				sizeof(struct ti_i2c_firmware_rec),
+				(u8 *)firmware_version);
+		if (status) {
+			kfree(firmware_version);
+			kfree(rom_desc);
+			kfree(ti_manuf_desc);
+			return status;
+		}
+
+		/*
+		 * Check version number of download with current
+		 * version in I2c
+		 */
+		download_cur_ver = (firmware_version->Ver_Major << 8) +
+				   (firmware_version->Ver_Minor);
+		download_new_ver = (fw_hdr->major_version << 8) +
+				   (fw_hdr->minor_version);
+
+		dev_dbg(dev, "%s - >> FW Versions Device %d.%d  Driver %d.%d\n",
+			__func__, firmware_version->Ver_Major,
+			firmware_version->Ver_Minor,
+			fw_hdr->major_version, fw_hdr->minor_version);
+
+		/*
+		 * Check if we have an old version in the I2C and
+		 * update if necessary
+		 */
+		if (download_cur_ver < download_new_ver) {
+			dev_dbg(dev, "%s - Update I2C dld from %d.%d to %d.%d\n",
+				__func__,
+				firmware_version->Ver_Major,
+				firmware_version->Ver_Minor,
+				fw_hdr->major_version,
+				fw_hdr->minor_version);
+
+			record = kmalloc(1, GFP_KERNEL);
+			if (!record) {
+				kfree(firmware_version);
+				kfree(rom_desc);
+				kfree(ti_manuf_desc);
+				return -ENOMEM;
+			}
+			/*
+			 * In order to update the I2C firmware we must
+			 * change the type 2 record to type 0xF2. This
+			 * will force the UMP to come up in Boot Mode.
+			 * Then while in boot mode, the driver will
+			 * download the latest firmware (padded to
+			 * 15.5k) into the UMP ram. Finally when the
+			 * device comes back up in download mode the
+			 * driver will cause the new firmware to be
+			 * copied from the UMP Ram to I2C and the
+			 * firmware will update the record type from
+			 * 0xf2 to 0x02.
+			 */
+			*record = I2C_DESC_TYPE_FIRMWARE_BLANK;
+
+			/*
+			 * Change the I2C Firmware record type to
+			 * 0xf2 to trigger an update
+			 */
+			status = write_rom(serial, start_address,
+					sizeof(*record), record);
+			if (status) {
+				kfree(record);
+				kfree(firmware_version);
+				kfree(rom_desc);
+				kfree(ti_manuf_desc);
+				return status;
+			}
+
+			/*
+			 * verify the write -- must do this in order
+			 * for write to complete before we do the
+			 * hardware reset
+			 */
+			status = read_rom(serial,
+						start_address,
+						sizeof(*record),
+						record);
+			if (status) {
+				kfree(record);
+				kfree(firmware_version);
+				kfree(rom_desc);
+				kfree(ti_manuf_desc);
+				return status;
+			}
+
+			if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
+				dev_err(dev, "%s - error resetting device\n",
+						__func__);
+				kfree(record);
+				kfree(firmware_version);
+				kfree(rom_desc);
+				kfree(ti_manuf_desc);
+				return -ENODEV;
+			}
+
+			dev_dbg(dev, "%s - HARDWARE RESET\n", __func__);
+
+			/* Reset UMP -- Back to BOOT MODE */
+			status = ti_vsend_sync(serial->serial->dev,
+					UMPC_HARDWARE_RESET,
+					0, 0, NULL, 0,
+					TI_VSEND_TIMEOUT_DEFAULT);
+
+			dev_dbg(dev, "%s - HARDWARE RESET return %d\n",
+					__func__, status);
+
+			/* return an error on purpose. */
+			kfree(record);
+			kfree(firmware_version);
+			kfree(rom_desc);
+			kfree(ti_manuf_desc);
+			return -ENODEV;
+		}
+		/* Same or newer fw version is already loaded */
+		serial->fw_version = download_cur_ver;
+		kfree(firmware_version);
+	}
+	/* Search for type 0xF2 record (firmware blank record) */
+	else {
+		start_address = get_descriptor_addr(serial,
+				I2C_DESC_TYPE_FIRMWARE_BLANK, rom_desc);
+		if (start_address != 0) {
+#define HEADER_SIZE	(sizeof(struct ti_i2c_desc) + \
+				sizeof(struct ti_i2c_firmware_rec))
+			u8 *header;
+			u8 *vheader;
+
+			header = kmalloc(HEADER_SIZE, GFP_KERNEL);
+			if (!header) {
+				kfree(rom_desc);
+				kfree(ti_manuf_desc);
+				return -ENOMEM;
+			}
+
+			vheader = kmalloc(HEADER_SIZE, GFP_KERNEL);
+			if (!vheader) {
+				kfree(header);
+				kfree(rom_desc);
+				kfree(ti_manuf_desc);
+				return -ENOMEM;
+			}
+
+			dev_dbg(dev, "%s - Found Type BLANK FIRMWARE (Type F2) record\n",
+					__func__);
+
+			/*
+			 * In order to update the I2C firmware we must change
+			 * the type 2 record to type 0xF2. This will force the
+			 * UMP to come up in Boot Mode.  Then while in boot
+			 * mode, the driver will download the latest firmware
+			 * (padded to 15.5k) into the UMP ram. Finally when the
+			 * device comes back up in download mode the driver
+			 * will cause the new firmware to be copied from the
+			 * UMP Ram to I2C and the firmware will update the
+			 * record type from 0xf2 to 0x02.
+			 */
+			status = build_i2c_fw_hdr(header, fw);
+			if (status) {
+				kfree(vheader);
+				kfree(header);
+				kfree(rom_desc);
+				kfree(ti_manuf_desc);
+				return -EINVAL;
+			}
+
+			/*
+			 * Update I2C with type 0xf2 record with correct
+			 * size and checksum
+			 */
+			status = write_rom(serial,
+						start_address,
+						HEADER_SIZE,
+						header);
+			if (status) {
+				kfree(vheader);
+				kfree(header);
+				kfree(rom_desc);
+				kfree(ti_manuf_desc);
+				return -EINVAL;
+			}
+
+			/*
+			 * verify the write -- must do this in order for
+			 * write to complete before we do the hardware reset
+			 */
+			status = read_rom(serial, start_address,
+							HEADER_SIZE, vheader);
+
+			if (status) {
+				dev_dbg(dev, "%s - can't read header back\n",
+						__func__);
+				kfree(vheader);
+				kfree(header);
+				kfree(rom_desc);
+				kfree(ti_manuf_desc);
+				return status;
+			}
+			if (memcmp(vheader, header, HEADER_SIZE)) {
+				dev_dbg(dev, "%s - write download record failed\n",
+						__func__);
+				kfree(vheader);
+				kfree(header);
+				kfree(rom_desc);
+				kfree(ti_manuf_desc);
+				return -EINVAL;
+			}
+
+			kfree(vheader);
+			kfree(header);
+
+			dev_dbg(dev, "%s - Start firmware update\n", __func__);
+
+			/* Tell firmware to copy download image into I2C */
+			status = ti_vsend_sync(serial->serial->dev,
+					UMPC_COPY_DNLD_TO_I2C,
+					0, 0, NULL, 0,
+					TI_VSEND_TIMEOUT_FW_DOWNLOAD);
+
+			dev_dbg(dev, "%s - Update complete 0x%x\n", __func__,
+					status);
+			if (status) {
+				dev_err(dev,
+					"%s - UMPC_COPY_DNLD_TO_I2C failed\n",
+					__func__);
+				kfree(rom_desc);
+				kfree(ti_manuf_desc);
+				return status;
+			}
+		}
+	}
+
+	/* The device is running the download code */
+	kfree(rom_desc);
+	kfree(ti_manuf_desc);
+	return 0;
+}
+
+static int do_boot_mode(struct edgeport_serial *serial,
+		const struct firmware *fw)
+{
+	struct device *dev = &serial->serial->interface->dev;
+	int status = 0;
+	struct edge_ti_manuf_descriptor *ti_manuf_desc;
+	struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data;
+
+	dev_dbg(dev, "%s - RUNNING IN BOOT MODE\n", __func__);
+
+	/* Configure the TI device so we can use the BULK pipes for download */
+	status = config_boot_dev(serial->serial->dev);
+	if (status)
+		return status;
+
+	if (le16_to_cpu(serial->serial->dev->descriptor.idVendor)
+							!= USB_VENDOR_ID_ION) {
+		dev_dbg(dev, "%s - VID = 0x%x\n", __func__,
+			le16_to_cpu(serial->serial->dev->descriptor.idVendor));
+		serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
+		goto stayinbootmode;
+	}
+
+	/*
+	 * We have an ION device (I2c Must be programmed)
+	 * Determine I2C image type
+	 */
+	if (i2c_type_bootmode(serial))
+		goto stayinbootmode;
+
+	/* Check for ION Vendor ID and that the I2C is valid */
+	if (!check_i2c_image(serial)) {
+		struct ti_i2c_image_header *header;
+		int i;
+		u8 cs = 0;
+		u8 *buffer;
+		int buffer_size;
+
+		/*
+		 * Validate Hardware version number
+		 * Read Manufacturing Descriptor from TI Based Edgeport
+		 */
+		ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
+		if (!ti_manuf_desc)
+			return -ENOMEM;
+
+		status = get_manuf_info(serial, (u8 *)ti_manuf_desc);
+		if (status) {
+			kfree(ti_manuf_desc);
+			goto stayinbootmode;
+		}
+
+		/* Check for version 2 */
+		if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) {
+			dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n",
+				__func__, ti_cpu_rev(ti_manuf_desc));
+			kfree(ti_manuf_desc);
+			goto stayinbootmode;
+		}
+
+		kfree(ti_manuf_desc);
+
+		/*
+		 * In order to update the I2C firmware we must change the type
+		 * 2 record to type 0xF2. This will force the UMP to come up
+		 * in Boot Mode.  Then while in boot mode, the driver will
+		 * download the latest firmware (padded to 15.5k) into the
+		 * UMP ram. Finally when the device comes back up in download
+		 * mode the driver will cause the new firmware to be copied
+		 * from the UMP Ram to I2C and the firmware will update the
+		 * record type from 0xf2 to 0x02.
+		 *
+		 * Do we really have to copy the whole firmware image,
+		 * or could we do this in place!
+		 */
+
+		/* Allocate a 15.5k buffer + 3 byte header */
+		buffer_size = (((1024 * 16) - 512) +
+					sizeof(struct ti_i2c_image_header));
+		buffer = kmalloc(buffer_size, GFP_KERNEL);
+		if (!buffer)
+			return -ENOMEM;
+
+		/* Initialize the buffer to 0xff (pad the buffer) */
+		memset(buffer, 0xff, buffer_size);
+		memcpy(buffer, &fw->data[4], fw->size - 4);
+
+		for (i = sizeof(struct ti_i2c_image_header);
+				i < buffer_size; i++) {
+			cs = (u8)(cs + buffer[i]);
+		}
+
+		header = (struct ti_i2c_image_header *)buffer;
+
+		/* update length and checksum after padding */
+		header->Length = cpu_to_le16((u16)(buffer_size -
+					sizeof(struct ti_i2c_image_header)));
+		header->CheckSum = cs;
+
+		/* Download the operational code  */
+		dev_dbg(dev, "%s - Downloading operational code image version %d.%d (TI UMP)\n",
+				__func__,
+				fw_hdr->major_version, fw_hdr->minor_version);
+		status = download_code(serial, buffer, buffer_size);
+
+		kfree(buffer);
+
+		if (status) {
+			dev_dbg(dev, "%s - Error downloading operational code image\n", __func__);
+			return status;
+		}
+
+		/* Device will reboot */
+		serial->product_info.TiMode = TI_MODE_TRANSITIONING;
+
+		dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__);
+
+		return 1;
+	}
+
+stayinbootmode:
+	/* Eprom is invalid or blank stay in boot mode */
+	dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__);
+	serial->product_info.TiMode = TI_MODE_BOOT;
+
+	return 1;
+}
+
+static int ti_do_config(struct edgeport_port *port, int feature, int on)
+{
+	on = !!on;	/* 1 or 0 not bitmask */
+
+	return send_port_cmd(port->port, feature, on, NULL, 0);
+}
+
+static int restore_mcr(struct edgeport_port *port, u8 mcr)
+{
+	int status = 0;
+
+	dev_dbg(&port->port->dev, "%s - %x\n", __func__, mcr);
+
+	status = ti_do_config(port, UMPC_SET_CLR_DTR, mcr & MCR_DTR);
+	if (status)
+		return status;
+	status = ti_do_config(port, UMPC_SET_CLR_RTS, mcr & MCR_RTS);
+	if (status)
+		return status;
+	return ti_do_config(port, UMPC_SET_CLR_LOOPBACK, mcr & MCR_LOOPBACK);
+}
+
+/* Convert TI LSR to standard UART flags */
+static u8 map_line_status(u8 ti_lsr)
+{
+	u8 lsr = 0;
+
+#define MAP_FLAG(flagUmp, flagUart)    \
+	if (ti_lsr & flagUmp) \
+		lsr |= flagUart;
+
+	MAP_FLAG(UMP_UART_LSR_OV_MASK, LSR_OVER_ERR)	/* overrun */
+	MAP_FLAG(UMP_UART_LSR_PE_MASK, LSR_PAR_ERR)	/* parity error */
+	MAP_FLAG(UMP_UART_LSR_FE_MASK, LSR_FRM_ERR)	/* framing error */
+	MAP_FLAG(UMP_UART_LSR_BR_MASK, LSR_BREAK)	/* break detected */
+	MAP_FLAG(UMP_UART_LSR_RX_MASK, LSR_RX_AVAIL)	/* rx data available */
+	MAP_FLAG(UMP_UART_LSR_TX_MASK, LSR_TX_EMPTY)	/* tx hold reg empty */
+
+#undef MAP_FLAG
+
+	return lsr;
+}
+
+static void handle_new_msr(struct edgeport_port *edge_port, u8 msr)
+{
+	struct async_icount *icount;
+	struct tty_struct *tty;
+
+	dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, msr);
+
+	if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
+			EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
+		icount = &edge_port->port->icount;
+
+		/* update input line counters */
+		if (msr & EDGEPORT_MSR_DELTA_CTS)
+			icount->cts++;
+		if (msr & EDGEPORT_MSR_DELTA_DSR)
+			icount->dsr++;
+		if (msr & EDGEPORT_MSR_DELTA_CD)
+			icount->dcd++;
+		if (msr & EDGEPORT_MSR_DELTA_RI)
+			icount->rng++;
+		wake_up_interruptible(&edge_port->port->port.delta_msr_wait);
+	}
+
+	/* Save the new modem status */
+	edge_port->shadow_msr = msr & 0xf0;
+
+	tty = tty_port_tty_get(&edge_port->port->port);
+	/* handle CTS flow control */
+	if (tty && C_CRTSCTS(tty)) {
+		if (msr & EDGEPORT_MSR_CTS)
+			tty_wakeup(tty);
+	}
+	tty_kref_put(tty);
+}
+
+static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
+							u8 lsr, u8 data)
+{
+	struct async_icount *icount;
+	u8 new_lsr = (u8)(lsr & (u8)(LSR_OVER_ERR | LSR_PAR_ERR |
+						LSR_FRM_ERR | LSR_BREAK));
+
+	dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, new_lsr);
+
+	edge_port->shadow_lsr = lsr;
+
+	if (new_lsr & LSR_BREAK)
+		/*
+		 * Parity and Framing errors only count if they
+		 * occur exclusive of a break being received.
+		 */
+		new_lsr &= (u8)(LSR_OVER_ERR | LSR_BREAK);
+
+	/* Place LSR data byte into Rx buffer */
+	if (lsr_data)
+		edge_tty_recv(edge_port->port, &data, 1);
+
+	/* update input line counters */
+	icount = &edge_port->port->icount;
+	if (new_lsr & LSR_BREAK)
+		icount->brk++;
+	if (new_lsr & LSR_OVER_ERR)
+		icount->overrun++;
+	if (new_lsr & LSR_PAR_ERR)
+		icount->parity++;
+	if (new_lsr & LSR_FRM_ERR)
+		icount->frame++;
+}
+
+static void edge_interrupt_callback(struct urb *urb)
+{
+	struct edgeport_serial *edge_serial = urb->context;
+	struct usb_serial_port *port;
+	struct edgeport_port *edge_port;
+	struct device *dev;
+	unsigned char *data = urb->transfer_buffer;
+	int length = urb->actual_length;
+	int port_number;
+	int function;
+	int retval;
+	u8 lsr;
+	u8 msr;
+	int status = urb->status;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
+		    __func__, status);
+		return;
+	default:
+		dev_err(&urb->dev->dev, "%s - nonzero urb status received: "
+			"%d\n", __func__, status);
+		goto exit;
+	}
+
+	if (!length) {
+		dev_dbg(&urb->dev->dev, "%s - no data in urb\n", __func__);
+		goto exit;
+	}
+
+	dev = &edge_serial->serial->dev->dev;
+	usb_serial_debug_data(dev, __func__, length, data);
+
+	if (length != 2) {
+		dev_dbg(dev, "%s - expecting packet of size 2, got %d\n", __func__, length);
+		goto exit;
+	}
+
+	port_number = TIUMP_GET_PORT_FROM_CODE(data[0]);
+	function    = TIUMP_GET_FUNC_FROM_CODE(data[0]);
+	dev_dbg(dev, "%s - port_number %d, function %d, info 0x%x\n", __func__,
+		port_number, function, data[1]);
+
+	if (port_number >= edge_serial->serial->num_ports) {
+		dev_err(dev, "bad port number %d\n", port_number);
+		goto exit;
+	}
+
+	port = edge_serial->serial->port[port_number];
+	edge_port = usb_get_serial_port_data(port);
+	if (!edge_port) {
+		dev_dbg(dev, "%s - edge_port not found\n", __func__);
+		return;
+	}
+	switch (function) {
+	case TIUMP_INTERRUPT_CODE_LSR:
+		lsr = map_line_status(data[1]);
+		if (lsr & UMP_UART_LSR_DATA_MASK) {
+			/*
+			 * Save the LSR event for bulk read completion routine
+			 */
+			dev_dbg(dev, "%s - LSR Event Port %u LSR Status = %02x\n",
+				__func__, port_number, lsr);
+			edge_port->lsr_event = 1;
+			edge_port->lsr_mask = lsr;
+		} else {
+			dev_dbg(dev, "%s - ===== Port %d LSR Status = %02x ======\n",
+				__func__, port_number, lsr);
+			handle_new_lsr(edge_port, 0, lsr, 0);
+		}
+		break;
+
+	case TIUMP_INTERRUPT_CODE_MSR:	/* MSR */
+		/* Copy MSR from UMP */
+		msr = data[1];
+		dev_dbg(dev, "%s - ===== Port %u MSR Status = %02x ======\n",
+			__func__, port_number, msr);
+		handle_new_msr(edge_port, msr);
+		break;
+
+	default:
+		dev_err(&urb->dev->dev,
+			"%s - Unknown Interrupt code from UMP %x\n",
+			__func__, data[1]);
+		break;
+
+	}
+
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&urb->dev->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			 __func__, retval);
+}
+
+static void edge_bulk_in_callback(struct urb *urb)
+{
+	struct edgeport_port *edge_port = urb->context;
+	struct device *dev = &edge_port->port->dev;
+	unsigned char *data = urb->transfer_buffer;
+	unsigned long flags;
+	int retval = 0;
+	int port_number;
+	int status = urb->status;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status);
+		return;
+	default:
+		dev_err(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", __func__, status);
+	}
+
+	if (status == -EPIPE)
+		goto exit;
+
+	if (status) {
+		dev_err(&urb->dev->dev, "%s - stopping read!\n", __func__);
+		return;
+	}
+
+	port_number = edge_port->port->port_number;
+
+	if (urb->actual_length > 0 && edge_port->lsr_event) {
+		edge_port->lsr_event = 0;
+		dev_dbg(dev, "%s ===== Port %u LSR Status = %02x, Data = %02x ======\n",
+			__func__, port_number, edge_port->lsr_mask, *data);
+		handle_new_lsr(edge_port, 1, edge_port->lsr_mask, *data);
+		/* Adjust buffer length/pointer */
+		--urb->actual_length;
+		++data;
+	}
+
+	if (urb->actual_length) {
+		usb_serial_debug_data(dev, __func__, urb->actual_length, data);
+		if (edge_port->close_pending)
+			dev_dbg(dev, "%s - close pending, dropping data on the floor\n",
+								__func__);
+		else
+			edge_tty_recv(edge_port->port, data,
+					urb->actual_length);
+		edge_port->port->icount.rx += urb->actual_length;
+	}
+
+exit:
+	/* continue read unless stopped */
+	spin_lock_irqsave(&edge_port->ep_lock, flags);
+	if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING)
+		retval = usb_submit_urb(urb, GFP_ATOMIC);
+	else if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPING)
+		edge_port->ep_read_urb_state = EDGE_READ_URB_STOPPED;
+
+	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+	if (retval)
+		dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval);
+}
+
+static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data,
+		int length)
+{
+	int queued;
+
+	queued = tty_insert_flip_string(&port->port, data, length);
+	if (queued < length)
+		dev_err(&port->dev, "%s - dropping data, %d bytes lost\n",
+			__func__, length - queued);
+	tty_flip_buffer_push(&port->port);
+}
+
+static void edge_bulk_out_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	int status = urb->status;
+	struct tty_struct *tty;
+
+	edge_port->ep_write_urb_in_use = 0;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
+		    __func__, status);
+		return;
+	default:
+		dev_err_console(port, "%s - nonzero write bulk status "
+			"received: %d\n", __func__, status);
+	}
+
+	/* send any buffered data */
+	tty = tty_port_tty_get(&port->port);
+	edge_send(port, tty);
+	tty_kref_put(tty);
+}
+
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	struct edgeport_serial *edge_serial;
+	struct usb_device *dev;
+	struct urb *urb;
+	int status;
+	u16 open_settings;
+	u8 transaction_timeout;
+
+	if (edge_port == NULL)
+		return -ENODEV;
+
+	dev = port->serial->dev;
+
+	/* turn off loopback */
+	status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0);
+	if (status) {
+		dev_err(&port->dev,
+				"%s - cannot send clear loopback command, %d\n",
+			__func__, status);
+		return status;
+	}
+
+	/* set up the port settings */
+	if (tty)
+		edge_set_termios(tty, port, &tty->termios);
+
+	/* open up the port */
+
+	/* milliseconds to timeout for DMA transfer */
+	transaction_timeout = 2;
+
+	edge_port->ump_read_timeout =
+				max(20, ((transaction_timeout * 3) / 2));
+
+	/* milliseconds to timeout for DMA transfer */
+	open_settings = (u8)(UMP_DMA_MODE_CONTINOUS |
+			     UMP_PIPE_TRANS_TIMEOUT_ENA |
+			     (transaction_timeout << 2));
+
+	dev_dbg(&port->dev, "%s - Sending UMPC_OPEN_PORT\n", __func__);
+
+	/* Tell TI to open and start the port */
+	status = send_port_cmd(port, UMPC_OPEN_PORT, open_settings, NULL, 0);
+	if (status) {
+		dev_err(&port->dev, "%s - cannot send open command, %d\n",
+							__func__, status);
+		return status;
+	}
+
+	/* Start the DMA? */
+	status = send_port_cmd(port, UMPC_START_PORT, 0, NULL, 0);
+	if (status) {
+		dev_err(&port->dev, "%s - cannot send start DMA command, %d\n",
+							__func__, status);
+		return status;
+	}
+
+	/* Clear TX and RX buffers in UMP */
+	status = purge_port(port, UMP_PORT_DIR_OUT | UMP_PORT_DIR_IN);
+	if (status) {
+		dev_err(&port->dev,
+			"%s - cannot send clear buffers command, %d\n",
+			__func__, status);
+		return status;
+	}
+
+	/* Read Initial MSR */
+	status = read_port_cmd(port, UMPC_READ_MSR, 0, &edge_port->shadow_msr, 1);
+	if (status) {
+		dev_err(&port->dev, "%s - cannot send read MSR command, %d\n",
+							__func__, status);
+		return status;
+	}
+
+	dev_dbg(&port->dev, "ShadowMSR 0x%X\n", edge_port->shadow_msr);
+
+	/* Set Initial MCR */
+	edge_port->shadow_mcr = MCR_RTS | MCR_DTR;
+	dev_dbg(&port->dev, "ShadowMCR 0x%X\n", edge_port->shadow_mcr);
+
+	edge_serial = edge_port->edge_serial;
+	if (mutex_lock_interruptible(&edge_serial->es_lock))
+		return -ERESTARTSYS;
+	if (edge_serial->num_ports_open == 0) {
+		/* we are the first port to open, post the interrupt urb */
+		urb = edge_serial->serial->port[0]->interrupt_in_urb;
+		urb->context = edge_serial;
+		status = usb_submit_urb(urb, GFP_KERNEL);
+		if (status) {
+			dev_err(&port->dev,
+				"%s - usb_submit_urb failed with value %d\n",
+					__func__, status);
+			goto release_es_lock;
+		}
+	}
+
+	/*
+	 * reset the data toggle on the bulk endpoints to work around bug in
+	 * host controllers where things get out of sync some times
+	 */
+	usb_clear_halt(dev, port->write_urb->pipe);
+	usb_clear_halt(dev, port->read_urb->pipe);
+
+	/* start up our bulk read urb */
+	urb = port->read_urb;
+	edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING;
+	urb->context = edge_port;
+	status = usb_submit_urb(urb, GFP_KERNEL);
+	if (status) {
+		dev_err(&port->dev,
+			"%s - read bulk usb_submit_urb failed with value %d\n",
+				__func__, status);
+		goto unlink_int_urb;
+	}
+
+	++edge_serial->num_ports_open;
+
+	goto release_es_lock;
+
+unlink_int_urb:
+	if (edge_port->edge_serial->num_ports_open == 0)
+		usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
+release_es_lock:
+	mutex_unlock(&edge_serial->es_lock);
+	return status;
+}
+
+static void edge_close(struct usb_serial_port *port)
+{
+	struct edgeport_serial *edge_serial;
+	struct edgeport_port *edge_port;
+	unsigned long flags;
+
+	edge_serial = usb_get_serial_data(port->serial);
+	edge_port = usb_get_serial_port_data(port);
+	if (edge_serial == NULL || edge_port == NULL)
+		return;
+
+	/*
+	 * The bulkreadcompletion routine will check
+	 * this flag and dump add read data
+	 */
+	edge_port->close_pending = 1;
+
+	usb_kill_urb(port->read_urb);
+	usb_kill_urb(port->write_urb);
+	edge_port->ep_write_urb_in_use = 0;
+	spin_lock_irqsave(&edge_port->ep_lock, flags);
+	kfifo_reset_out(&port->write_fifo);
+	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+
+	dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__);
+	send_port_cmd(port, UMPC_CLOSE_PORT, 0, NULL, 0);
+
+	mutex_lock(&edge_serial->es_lock);
+	--edge_port->edge_serial->num_ports_open;
+	if (edge_port->edge_serial->num_ports_open <= 0) {
+		/* last port is now closed, let's shut down our interrupt urb */
+		usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
+		edge_port->edge_serial->num_ports_open = 0;
+	}
+	mutex_unlock(&edge_serial->es_lock);
+	edge_port->close_pending = 0;
+}
+
+static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
+				const unsigned char *data, int count)
+{
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+
+	if (count == 0) {
+		dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__);
+		return 0;
+	}
+
+	if (edge_port == NULL)
+		return -ENODEV;
+	if (edge_port->close_pending == 1)
+		return -ENODEV;
+
+	count = kfifo_in_locked(&port->write_fifo, data, count,
+							&edge_port->ep_lock);
+	edge_send(port, tty);
+
+	return count;
+}
+
+static void edge_send(struct usb_serial_port *port, struct tty_struct *tty)
+{
+	int count, result;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&edge_port->ep_lock, flags);
+
+	if (edge_port->ep_write_urb_in_use) {
+		spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+		return;
+	}
+
+	count = kfifo_out(&port->write_fifo,
+				port->write_urb->transfer_buffer,
+				port->bulk_out_size);
+
+	if (count == 0) {
+		spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+		return;
+	}
+
+	edge_port->ep_write_urb_in_use = 1;
+
+	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+
+	usb_serial_debug_data(&port->dev, __func__, count, port->write_urb->transfer_buffer);
+
+	/* set up our urb */
+	port->write_urb->transfer_buffer_length = count;
+
+	/* send the data out the bulk port */
+	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+	if (result) {
+		dev_err_console(port,
+			"%s - failed submitting write urb, error %d\n",
+				__func__, result);
+		edge_port->ep_write_urb_in_use = 0;
+		/* TODO: reschedule edge_send */
+	} else
+		edge_port->port->icount.tx += count;
+
+	/*
+	 * wakeup any process waiting for writes to complete
+	 * there is now more room in the buffer for new writes
+	 */
+	if (tty)
+		tty_wakeup(tty);
+}
+
+static unsigned int edge_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	unsigned int room;
+	unsigned long flags;
+
+	if (edge_port == NULL)
+		return 0;
+	if (edge_port->close_pending == 1)
+		return 0;
+
+	spin_lock_irqsave(&edge_port->ep_lock, flags);
+	room = kfifo_avail(&port->write_fifo);
+	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+
+	dev_dbg(&port->dev, "%s - returns %u\n", __func__, room);
+	return room;
+}
+
+static unsigned int edge_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	unsigned int chars;
+	unsigned long flags;
+	if (edge_port == NULL)
+		return 0;
+
+	spin_lock_irqsave(&edge_port->ep_lock, flags);
+	chars = kfifo_len(&port->write_fifo);
+	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+
+	dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars);
+	return chars;
+}
+
+static bool edge_tx_empty(struct usb_serial_port *port)
+{
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	int ret;
+
+	ret = tx_active(edge_port);
+	if (ret > 0)
+		return false;
+
+	return true;
+}
+
+static void edge_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	int status;
+
+	if (edge_port == NULL)
+		return;
+
+	/* if we are implementing XON/XOFF, send the stop character */
+	if (I_IXOFF(tty)) {
+		unsigned char stop_char = STOP_CHAR(tty);
+		status = edge_write(tty, port, &stop_char, 1);
+		if (status <= 0) {
+			dev_err(&port->dev, "%s - failed to write stop character, %d\n", __func__, status);
+		}
+	}
+
+	/*
+	 * if we are implementing RTS/CTS, stop reads
+	 * and the Edgeport will clear the RTS line
+	 */
+	if (C_CRTSCTS(tty))
+		stop_read(edge_port);
+
+}
+
+static void edge_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	int status;
+
+	if (edge_port == NULL)
+		return;
+
+	/* if we are implementing XON/XOFF, send the start character */
+	if (I_IXOFF(tty)) {
+		unsigned char start_char = START_CHAR(tty);
+		status = edge_write(tty, port, &start_char, 1);
+		if (status <= 0) {
+			dev_err(&port->dev, "%s - failed to write start character, %d\n", __func__, status);
+		}
+	}
+	/*
+	 * if we are implementing RTS/CTS, restart reads
+	 * are the Edgeport will assert the RTS line
+	 */
+	if (C_CRTSCTS(tty)) {
+		status = restart_read(edge_port);
+		if (status)
+			dev_err(&port->dev,
+				"%s - read bulk usb_submit_urb failed: %d\n",
+							__func__, status);
+	}
+
+}
+
+static void stop_read(struct edgeport_port *edge_port)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&edge_port->ep_lock, flags);
+
+	if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING)
+		edge_port->ep_read_urb_state = EDGE_READ_URB_STOPPING;
+	edge_port->shadow_mcr &= ~MCR_RTS;
+
+	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+}
+
+static int restart_read(struct edgeport_port *edge_port)
+{
+	struct urb *urb;
+	int status = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&edge_port->ep_lock, flags);
+
+	if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPED) {
+		urb = edge_port->port->read_urb;
+		status = usb_submit_urb(urb, GFP_ATOMIC);
+	}
+	edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING;
+	edge_port->shadow_mcr |= MCR_RTS;
+
+	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+
+	return status;
+}
+
+static void change_port_settings(struct tty_struct *tty,
+		struct edgeport_port *edge_port, const struct ktermios *old_termios)
+{
+	struct device *dev = &edge_port->port->dev;
+	struct ump_uart_config *config;
+	int baud;
+	unsigned cflag;
+	int status;
+
+	config = kmalloc (sizeof (*config), GFP_KERNEL);
+	if (!config) {
+		tty->termios = *old_termios;
+		return;
+	}
+
+	cflag = tty->termios.c_cflag;
+
+	config->wFlags = 0;
+
+	/* These flags must be set */
+	config->wFlags |= UMP_MASK_UART_FLAGS_RECEIVE_MS_INT;
+	config->wFlags |= UMP_MASK_UART_FLAGS_AUTO_START_ON_ERR;
+	config->bUartMode = (u8)(edge_port->bUartMode);
+
+	switch (cflag & CSIZE) {
+	case CS5:
+		    config->bDataBits = UMP_UART_CHAR5BITS;
+		    dev_dbg(dev, "%s - data bits = 5\n", __func__);
+		    break;
+	case CS6:
+		    config->bDataBits = UMP_UART_CHAR6BITS;
+		    dev_dbg(dev, "%s - data bits = 6\n", __func__);
+		    break;
+	case CS7:
+		    config->bDataBits = UMP_UART_CHAR7BITS;
+		    dev_dbg(dev, "%s - data bits = 7\n", __func__);
+		    break;
+	default:
+	case CS8:
+		    config->bDataBits = UMP_UART_CHAR8BITS;
+		    dev_dbg(dev, "%s - data bits = 8\n", __func__);
+			    break;
+	}
+
+	if (cflag & PARENB) {
+		if (cflag & PARODD) {
+			config->wFlags |= UMP_MASK_UART_FLAGS_PARITY;
+			config->bParity = UMP_UART_ODDPARITY;
+			dev_dbg(dev, "%s - parity = odd\n", __func__);
+		} else {
+			config->wFlags |= UMP_MASK_UART_FLAGS_PARITY;
+			config->bParity = UMP_UART_EVENPARITY;
+			dev_dbg(dev, "%s - parity = even\n", __func__);
+		}
+	} else {
+		config->bParity = UMP_UART_NOPARITY;
+		dev_dbg(dev, "%s - parity = none\n", __func__);
+	}
+
+	if (cflag & CSTOPB) {
+		config->bStopBits = UMP_UART_STOPBIT2;
+		dev_dbg(dev, "%s - stop bits = 2\n", __func__);
+	} else {
+		config->bStopBits = UMP_UART_STOPBIT1;
+		dev_dbg(dev, "%s - stop bits = 1\n", __func__);
+	}
+
+	/* figure out the flow control settings */
+	if (cflag & CRTSCTS) {
+		config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW;
+		config->wFlags |= UMP_MASK_UART_FLAGS_RTS_FLOW;
+		dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__);
+	} else {
+		dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__);
+		restart_read(edge_port);
+	}
+
+	/*
+	 * if we are implementing XON/XOFF, set the start and stop
+	 * character in the device
+	 */
+	config->cXon  = START_CHAR(tty);
+	config->cXoff = STOP_CHAR(tty);
+
+	/* if we are implementing INBOUND XON/XOFF */
+	if (I_IXOFF(tty)) {
+		config->wFlags |= UMP_MASK_UART_FLAGS_IN_X;
+		dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
+			__func__, config->cXon, config->cXoff);
+	} else
+		dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__);
+
+	/* if we are implementing OUTBOUND XON/XOFF */
+	if (I_IXON(tty)) {
+		config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X;
+		dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
+			__func__, config->cXon, config->cXoff);
+	} else
+		dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__);
+
+	tty->termios.c_cflag &= ~CMSPAR;
+
+	/* Round the baud rate */
+	baud = tty_get_baud_rate(tty);
+	if (!baud) {
+		/* pick a default, any default... */
+		baud = 9600;
+	} else {
+		/* Avoid a zero divisor. */
+		baud = min(baud, 461550);
+		tty_encode_baud_rate(tty, baud, baud);
+	}
+
+	edge_port->baud_rate = baud;
+	config->wBaudRate = (u16)((461550L + baud/2) / baud);
+
+	/* FIXME: Recompute actual baud from divisor here */
+
+	dev_dbg(dev, "%s - baud rate = %d, wBaudRate = %d\n", __func__, baud, config->wBaudRate);
+
+	dev_dbg(dev, "wBaudRate:   %d\n", (int)(461550L / config->wBaudRate));
+	dev_dbg(dev, "wFlags:    0x%x\n", config->wFlags);
+	dev_dbg(dev, "bDataBits:   %d\n", config->bDataBits);
+	dev_dbg(dev, "bParity:     %d\n", config->bParity);
+	dev_dbg(dev, "bStopBits:   %d\n", config->bStopBits);
+	dev_dbg(dev, "cXon:        %d\n", config->cXon);
+	dev_dbg(dev, "cXoff:       %d\n", config->cXoff);
+	dev_dbg(dev, "bUartMode:   %d\n", config->bUartMode);
+
+	/* move the word values into big endian mode */
+	cpu_to_be16s(&config->wFlags);
+	cpu_to_be16s(&config->wBaudRate);
+
+	status = send_port_cmd(edge_port->port, UMPC_SET_CONFIG, 0, config,
+			sizeof(*config));
+	if (status)
+		dev_dbg(dev, "%s - error %d when trying to write config to device\n",
+			__func__, status);
+	kfree(config);
+}
+
+static void edge_set_termios(struct tty_struct *tty,
+			     struct usb_serial_port *port,
+			     const struct ktermios *old_termios)
+{
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+
+	if (edge_port == NULL)
+		return;
+	/* change the port settings to the new ones specified */
+	change_port_settings(tty, edge_port, old_termios);
+}
+
+static int edge_tiocmset(struct tty_struct *tty,
+					unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	unsigned int mcr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&edge_port->ep_lock, flags);
+	mcr = edge_port->shadow_mcr;
+	if (set & TIOCM_RTS)
+		mcr |= MCR_RTS;
+	if (set & TIOCM_DTR)
+		mcr |= MCR_DTR;
+	if (set & TIOCM_LOOP)
+		mcr |= MCR_LOOPBACK;
+
+	if (clear & TIOCM_RTS)
+		mcr &= ~MCR_RTS;
+	if (clear & TIOCM_DTR)
+		mcr &= ~MCR_DTR;
+	if (clear & TIOCM_LOOP)
+		mcr &= ~MCR_LOOPBACK;
+
+	edge_port->shadow_mcr = mcr;
+	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+
+	restore_mcr(edge_port, mcr);
+	return 0;
+}
+
+static int edge_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	unsigned int result = 0;
+	unsigned int msr;
+	unsigned int mcr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&edge_port->ep_lock, flags);
+
+	msr = edge_port->shadow_msr;
+	mcr = edge_port->shadow_mcr;
+	result = ((mcr & MCR_DTR)	? TIOCM_DTR: 0)	  /* 0x002 */
+		  | ((mcr & MCR_RTS)	? TIOCM_RTS: 0)   /* 0x004 */
+		  | ((msr & EDGEPORT_MSR_CTS)	? TIOCM_CTS: 0)   /* 0x020 */
+		  | ((msr & EDGEPORT_MSR_CD)	? TIOCM_CAR: 0)   /* 0x040 */
+		  | ((msr & EDGEPORT_MSR_RI)	? TIOCM_RI:  0)   /* 0x080 */
+		  | ((msr & EDGEPORT_MSR_DSR)	? TIOCM_DSR: 0);  /* 0x100 */
+
+
+	dev_dbg(&port->dev, "%s -- %x\n", __func__, result);
+	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+
+	return result;
+}
+
+static void edge_break(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	int status;
+	int bv = 0;	/* Off */
+
+	if (break_state == -1)
+		bv = 1;	/* On */
+	status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv);
+	if (status)
+		dev_dbg(&port->dev, "%s - error %d sending break set/clear command.\n",
+			__func__, status);
+}
+
+static void edge_heartbeat_schedule(struct edgeport_serial *edge_serial)
+{
+	if (!edge_serial->use_heartbeat)
+		return;
+
+	schedule_delayed_work(&edge_serial->heartbeat_work,
+			FW_HEARTBEAT_SECS * HZ);
+}
+
+static void edge_heartbeat_work(struct work_struct *work)
+{
+	struct edgeport_serial *serial;
+	struct ti_i2c_desc *rom_desc;
+
+	serial = container_of(work, struct edgeport_serial,
+			heartbeat_work.work);
+
+	rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
+
+	/* Descriptor address request is enough to reset the firmware timer */
+	if (!rom_desc || !get_descriptor_addr(serial, I2C_DESC_TYPE_ION,
+			rom_desc)) {
+		dev_err(&serial->serial->interface->dev,
+				"%s - Incomplete heartbeat\n", __func__);
+	}
+	kfree(rom_desc);
+
+	edge_heartbeat_schedule(serial);
+}
+
+static int edge_calc_num_ports(struct usb_serial *serial,
+				struct usb_serial_endpoints *epds)
+{
+	struct device *dev = &serial->interface->dev;
+	unsigned char num_ports = serial->type->num_ports;
+
+	/* Make sure we have the required endpoints when in download mode. */
+	if (serial->interface->cur_altsetting->desc.bNumEndpoints > 1) {
+		if (epds->num_bulk_in < num_ports ||
+				epds->num_bulk_out < num_ports ||
+				epds->num_interrupt_in < 1) {
+			dev_err(dev, "required endpoints missing\n");
+			return -ENODEV;
+		}
+	}
+
+	return num_ports;
+}
+
+static int edge_startup(struct usb_serial *serial)
+{
+	struct edgeport_serial *edge_serial;
+	int status;
+	u16 product_id;
+
+	/* create our private serial structure */
+	edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
+	if (!edge_serial)
+		return -ENOMEM;
+
+	mutex_init(&edge_serial->es_lock);
+	edge_serial->serial = serial;
+	INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
+	usb_set_serial_data(serial, edge_serial);
+
+	status = download_fw(edge_serial);
+	if (status < 0) {
+		kfree(edge_serial);
+		return status;
+	}
+
+	if (status > 0)
+		return 1;	/* bind but do not register any ports */
+
+	product_id = le16_to_cpu(
+			edge_serial->serial->dev->descriptor.idProduct);
+
+	/* Currently only the EP/416 models require heartbeat support */
+	if (edge_serial->fw_version > FW_HEARTBEAT_VERSION_CUTOFF) {
+		if (product_id == ION_DEVICE_ID_TI_EDGEPORT_416 ||
+			product_id == ION_DEVICE_ID_TI_EDGEPORT_416B) {
+			edge_serial->use_heartbeat = true;
+		}
+	}
+
+	edge_heartbeat_schedule(edge_serial);
+
+	return 0;
+}
+
+static void edge_disconnect(struct usb_serial *serial)
+{
+	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+
+	cancel_delayed_work_sync(&edge_serial->heartbeat_work);
+}
+
+static void edge_release(struct usb_serial *serial)
+{
+	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+
+	cancel_delayed_work_sync(&edge_serial->heartbeat_work);
+	kfree(edge_serial);
+}
+
+static int edge_port_probe(struct usb_serial_port *port)
+{
+	struct edgeport_port *edge_port;
+	int ret;
+
+	edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL);
+	if (!edge_port)
+		return -ENOMEM;
+
+	spin_lock_init(&edge_port->ep_lock);
+	edge_port->port = port;
+	edge_port->edge_serial = usb_get_serial_data(port->serial);
+	edge_port->bUartMode = default_uart_mode;
+
+	switch (port->port_number) {
+	case 0:
+		edge_port->uart_base = UMPMEM_BASE_UART1;
+		edge_port->dma_address = UMPD_OEDB1_ADDRESS;
+		break;
+	case 1:
+		edge_port->uart_base = UMPMEM_BASE_UART2;
+		edge_port->dma_address = UMPD_OEDB2_ADDRESS;
+		break;
+	default:
+		dev_err(&port->dev, "unknown port number\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	dev_dbg(&port->dev,
+		"%s - port_number = %d, uart_base = %04x, dma_address = %04x\n",
+		__func__, port->port_number, edge_port->uart_base,
+		edge_port->dma_address);
+
+	usb_set_serial_port_data(port, edge_port);
+
+	ret = edge_create_sysfs_attrs(port);
+	if (ret)
+		goto err;
+
+	/*
+	 * The LSR does not tell when the transmitter shift register has
+	 * emptied so add a one-character drain delay.
+	 */
+	port->port.drain_delay = 1;
+
+	return 0;
+err:
+	kfree(edge_port);
+
+	return ret;
+}
+
+static void edge_port_remove(struct usb_serial_port *port)
+{
+	struct edgeport_port *edge_port;
+
+	edge_port = usb_get_serial_port_data(port);
+	edge_remove_sysfs_attrs(port);
+	kfree(edge_port);
+}
+
+/* Sysfs Attributes */
+
+static ssize_t uart_mode_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct usb_serial_port *port = to_usb_serial_port(dev);
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+
+	return sprintf(buf, "%d\n", edge_port->bUartMode);
+}
+
+static ssize_t uart_mode_store(struct device *dev,
+	struct device_attribute *attr, const char *valbuf, size_t count)
+{
+	struct usb_serial_port *port = to_usb_serial_port(dev);
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	unsigned int v = simple_strtoul(valbuf, NULL, 0);
+
+	dev_dbg(dev, "%s: setting uart_mode = %d\n", __func__, v);
+
+	if (v < 256)
+		edge_port->bUartMode = v;
+	else
+		dev_err(dev, "%s - uart_mode %d is invalid\n", __func__, v);
+
+	return count;
+}
+static DEVICE_ATTR_RW(uart_mode);
+
+static int edge_create_sysfs_attrs(struct usb_serial_port *port)
+{
+	return device_create_file(&port->dev, &dev_attr_uart_mode);
+}
+
+static int edge_remove_sysfs_attrs(struct usb_serial_port *port)
+{
+	device_remove_file(&port->dev, &dev_attr_uart_mode);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int edge_suspend(struct usb_serial *serial, pm_message_t message)
+{
+	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+
+	cancel_delayed_work_sync(&edge_serial->heartbeat_work);
+
+	return 0;
+}
+
+static int edge_resume(struct usb_serial *serial)
+{
+	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+
+	edge_heartbeat_schedule(edge_serial);
+
+	return 0;
+}
+#endif
+
+static struct usb_serial_driver edgeport_1port_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "edgeport_ti_1",
+	},
+	.description		= "Edgeport TI 1 port adapter",
+	.id_table		= edgeport_1port_id_table,
+	.num_ports		= 1,
+	.num_bulk_out		= 1,
+	.open			= edge_open,
+	.close			= edge_close,
+	.throttle		= edge_throttle,
+	.unthrottle		= edge_unthrottle,
+	.attach			= edge_startup,
+	.calc_num_ports		= edge_calc_num_ports,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
+	.set_termios		= edge_set_termios,
+	.tiocmget		= edge_tiocmget,
+	.tiocmset		= edge_tiocmset,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
+	.write			= edge_write,
+	.write_room		= edge_write_room,
+	.chars_in_buffer	= edge_chars_in_buffer,
+	.tx_empty		= edge_tx_empty,
+	.break_ctl		= edge_break,
+	.read_int_callback	= edge_interrupt_callback,
+	.read_bulk_callback	= edge_bulk_in_callback,
+	.write_bulk_callback	= edge_bulk_out_callback,
+#ifdef CONFIG_PM
+	.suspend		= edge_suspend,
+	.resume			= edge_resume,
+#endif
+};
+
+static struct usb_serial_driver edgeport_2port_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "edgeport_ti_2",
+	},
+	.description		= "Edgeport TI 2 port adapter",
+	.id_table		= edgeport_2port_id_table,
+	.num_ports		= 2,
+	.num_bulk_out		= 1,
+	.open			= edge_open,
+	.close			= edge_close,
+	.throttle		= edge_throttle,
+	.unthrottle		= edge_unthrottle,
+	.attach			= edge_startup,
+	.calc_num_ports		= edge_calc_num_ports,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
+	.set_termios		= edge_set_termios,
+	.tiocmget		= edge_tiocmget,
+	.tiocmset		= edge_tiocmset,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
+	.write			= edge_write,
+	.write_room		= edge_write_room,
+	.chars_in_buffer	= edge_chars_in_buffer,
+	.tx_empty		= edge_tx_empty,
+	.break_ctl		= edge_break,
+	.read_int_callback	= edge_interrupt_callback,
+	.read_bulk_callback	= edge_bulk_in_callback,
+	.write_bulk_callback	= edge_bulk_out_callback,
+#ifdef CONFIG_PM
+	.suspend		= edge_suspend,
+	.resume			= edge_resume,
+#endif
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&edgeport_1port_device, &edgeport_2port_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table_combined);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("edgeport/down3.bin");
+
+module_param(ignore_cpu_rev, bool, 0644);
+MODULE_PARM_DESC(ignore_cpu_rev,
+			"Ignore the cpu revision when connecting to a device");
+
+module_param(default_uart_mode, int, 0644);
+MODULE_PARM_DESC(default_uart_mode, "Default uart_mode, 0=RS232, ...");
diff --git a/drivers/usb/serial/io_ti.h b/drivers/usb/serial/io_ti.h
new file mode 100644
index 000000000..24fe1312c
--- /dev/null
+++ b/drivers/usb/serial/io_ti.h
@@ -0,0 +1,181 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*****************************************************************************
+ *
+ *	Copyright (C) 1997-2002 Inside Out Networks, Inc.
+ *
+ *	Feb-16-2001	DMI	Added I2C structure definitions
+ *	May-29-2002	gkh	Ported to Linux
+ *
+ *
+ ******************************************************************************/
+
+#ifndef _IO_TI_H_
+#define _IO_TI_H_
+
+/* Address Space */
+#define DTK_ADDR_SPACE_XDATA		0x03	/* Addr is placed in XDATA space */
+#define DTK_ADDR_SPACE_I2C_TYPE_II	0x82	/* Addr is placed in I2C area */
+#define DTK_ADDR_SPACE_I2C_TYPE_III	0x83	/* Addr is placed in I2C area */
+
+/* UART Defines */
+#define UMPMEM_BASE_UART1		0xFFA0	/* UMP UART1 base address */
+#define UMPMEM_BASE_UART2		0xFFB0	/* UMP UART2 base address */
+#define UMPMEM_OFFS_UART_LSR		0x05	/* UMP UART LSR register offset */
+
+/* Bits per character */
+#define UMP_UART_CHAR5BITS		0x00
+#define UMP_UART_CHAR6BITS		0x01
+#define UMP_UART_CHAR7BITS		0x02
+#define UMP_UART_CHAR8BITS		0x03
+
+/* Parity */
+#define UMP_UART_NOPARITY		0x00
+#define UMP_UART_ODDPARITY		0x01
+#define UMP_UART_EVENPARITY		0x02
+#define UMP_UART_MARKPARITY		0x03
+#define UMP_UART_SPACEPARITY		0x04
+
+/* Stop bits */
+#define UMP_UART_STOPBIT1		0x00
+#define UMP_UART_STOPBIT15		0x01
+#define UMP_UART_STOPBIT2		0x02
+
+/* Line status register masks */
+#define UMP_UART_LSR_OV_MASK		0x01
+#define UMP_UART_LSR_PE_MASK		0x02
+#define UMP_UART_LSR_FE_MASK		0x04
+#define UMP_UART_LSR_BR_MASK		0x08
+#define UMP_UART_LSR_ER_MASK		0x0F
+#define UMP_UART_LSR_RX_MASK		0x10
+#define UMP_UART_LSR_TX_MASK		0x20
+
+#define UMP_UART_LSR_DATA_MASK		(LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)
+
+/* Port Settings Constants) */
+#define UMP_MASK_UART_FLAGS_RTS_FLOW		0x0001
+#define UMP_MASK_UART_FLAGS_RTS_DISABLE		0x0002
+#define UMP_MASK_UART_FLAGS_PARITY		0x0008
+#define UMP_MASK_UART_FLAGS_OUT_X_DSR_FLOW	0x0010
+#define UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW	0x0020
+#define UMP_MASK_UART_FLAGS_OUT_X		0x0040
+#define UMP_MASK_UART_FLAGS_OUT_XA		0x0080
+#define UMP_MASK_UART_FLAGS_IN_X		0x0100
+#define UMP_MASK_UART_FLAGS_DTR_FLOW		0x0800
+#define UMP_MASK_UART_FLAGS_DTR_DISABLE		0x1000
+#define UMP_MASK_UART_FLAGS_RECEIVE_MS_INT	0x2000
+#define UMP_MASK_UART_FLAGS_AUTO_START_ON_ERR	0x4000
+
+#define UMP_DMA_MODE_CONTINOUS			0x01
+#define UMP_PIPE_TRANS_TIMEOUT_ENA		0x80
+#define UMP_PIPE_TRANSFER_MODE_MASK		0x03
+#define UMP_PIPE_TRANS_TIMEOUT_MASK		0x7C
+
+/* Purge port Direction Mask Bits */
+#define UMP_PORT_DIR_OUT			0x01
+#define UMP_PORT_DIR_IN				0x02
+
+/* Address of Port 0 */
+#define UMPM_UART1_PORT				0x03
+
+/* Commands */
+#define	UMPC_SET_CONFIG			0x05
+#define	UMPC_OPEN_PORT			0x06
+#define	UMPC_CLOSE_PORT			0x07
+#define	UMPC_START_PORT			0x08
+#define	UMPC_STOP_PORT			0x09
+#define	UMPC_TEST_PORT			0x0A
+#define	UMPC_PURGE_PORT			0x0B
+
+/* Force the Firmware to complete the current Read */
+#define	UMPC_COMPLETE_READ		0x80
+/* Force UMP back into BOOT Mode */
+#define	UMPC_HARDWARE_RESET		0x81
+/*
+ * Copy current download image to type 0xf2 record in 16k I2C
+ * firmware will change 0xff record to type 2 record when complete
+ */
+#define	UMPC_COPY_DNLD_TO_I2C		0x82
+
+/*
+ * Special function register commands
+ * wIndex is register address
+ * wValue is MSB/LSB mask/data
+ */
+#define	UMPC_WRITE_SFR			0x83	/* Write SFR Register */
+
+/* wIndex is register address */
+#define	UMPC_READ_SFR			0x84	/* Read SRF Register */
+
+/* Set or Clear DTR (wValue bit 0 Set/Clear)	wIndex ModuleID (port) */
+#define	UMPC_SET_CLR_DTR		0x85
+
+/* Set or Clear RTS (wValue bit 0 Set/Clear)	wIndex ModuleID (port) */
+#define	UMPC_SET_CLR_RTS		0x86
+
+/* Set or Clear LOOPBACK (wValue bit 0 Set/Clear) wIndex ModuleID (port) */
+#define	UMPC_SET_CLR_LOOPBACK		0x87
+
+/* Set or Clear BREAK (wValue bit 0 Set/Clear)	wIndex ModuleID (port) */
+#define	UMPC_SET_CLR_BREAK		0x88
+
+/* Read MSR wIndex ModuleID (port) */
+#define	UMPC_READ_MSR			0x89
+
+/* Toolkit commands */
+/* Read-write group */
+#define	UMPC_MEMORY_READ		0x92
+#define	UMPC_MEMORY_WRITE		0x93
+
+/*
+ *	UMP DMA Definitions
+ */
+#define UMPD_OEDB1_ADDRESS		0xFF08
+#define UMPD_OEDB2_ADDRESS		0xFF10
+
+struct out_endpoint_desc_block {
+	u8 Configuration;
+	u8 XBufAddr;
+	u8 XByteCount;
+	u8 Unused1;
+	u8 Unused2;
+	u8 YBufAddr;
+	u8 YByteCount;
+	u8 BufferSize;
+};
+
+
+/*
+ * TYPE DEFINITIONS
+ * Structures for Firmware commands
+ */
+/* UART settings */
+struct ump_uart_config {
+	u16 wBaudRate;		/* Baud rate                        */
+	u16 wFlags;		/* Bitmap mask of flags             */
+	u8 bDataBits;		/* 5..8 - data bits per character   */
+	u8 bParity;		/* Parity settings                  */
+	u8 bStopBits;		/* Stop bits settings               */
+	char cXon;		/* XON character                    */
+	char cXoff;		/* XOFF character                   */
+	u8 bUartMode;		/* Will be updated when a user      */
+				/* interface is defined             */
+};
+
+
+/*
+ * TYPE DEFINITIONS
+ * Structures for USB interrupts
+ */
+/* Interrupt packet structure */
+struct ump_interrupt {
+	u8 bICode;			/* Interrupt code (interrupt num)   */
+	u8 bIInfo;			/* Interrupt information            */
+};
+
+
+#define TIUMP_GET_PORT_FROM_CODE(c)	(((c) >> 6) & 0x01)
+#define TIUMP_GET_FUNC_FROM_CODE(c)	((c) & 0x0f)
+#define TIUMP_INTERRUPT_CODE_LSR	0x03
+#define TIUMP_INTERRUPT_CODE_MSR	0x04
+
+#endif
diff --git a/drivers/usb/serial/io_usbvend.h b/drivers/usb/serial/io_usbvend.h
new file mode 100644
index 000000000..9a6f742ad
--- /dev/null
+++ b/drivers/usb/serial/io_usbvend.h
@@ -0,0 +1,681 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/************************************************************************
+ *
+ *	USBVEND.H		Vendor-specific USB definitions
+ *
+ *	NOTE: This must be kept in sync with the Edgeport firmware and
+ *	must be kept backward-compatible with older firmware.
+ *
+ ************************************************************************
+ *
+ *	Copyright (C) 1998 Inside Out Networks, Inc.
+ *
+ ************************************************************************/
+
+#if !defined(_USBVEND_H)
+#define	_USBVEND_H
+
+/************************************************************************
+ *
+ *		D e f i n e s   /   T y p e d e f s
+ *
+ ************************************************************************/
+
+//
+// Definitions of USB product IDs
+//
+
+#define	USB_VENDOR_ID_ION	0x1608		// Our VID
+#define	USB_VENDOR_ID_TI	0x0451		// TI VID
+#define USB_VENDOR_ID_AXIOHM	0x05D9		/* Axiohm VID */
+
+//
+// Definitions of USB product IDs (PID)
+// We break the USB-defined PID into an OEM Id field (upper 6 bits)
+// and a Device Id (bottom 10 bits). The Device Id defines what
+// device this actually is regardless of what the OEM wants to
+// call it.
+//
+
+// ION-device OEM IDs
+#define	ION_OEM_ID_ION		0		// 00h Inside Out Networks
+#define	ION_OEM_ID_NLYNX	1		// 01h NLynx Systems
+#define	ION_OEM_ID_GENERIC	2		// 02h Generic OEM
+#define	ION_OEM_ID_MAC		3		// 03h Mac Version
+#define	ION_OEM_ID_MEGAWOLF	4		// 04h Lupusb OEM Mac version (MegaWolf)
+#define	ION_OEM_ID_MULTITECH	5		// 05h Multitech Rapidports
+#define	ION_OEM_ID_AGILENT	6		// 06h AGILENT board
+
+
+// ION-device Device IDs
+// Product IDs - assigned to match middle digit of serial number (No longer true)
+
+#define ION_DEVICE_ID_80251_NETCHIP	0x020	// This bit is set in the PID if this edgeport hardware$
+						// is based on the 80251+Netchip.
+
+#define ION_DEVICE_ID_GENERATION_1	0x00	// Value for 930 based edgeports
+#define ION_DEVICE_ID_GENERATION_2	0x01	// Value for 80251+Netchip.
+#define ION_DEVICE_ID_GENERATION_3	0x02	// Value for Texas Instruments TUSB5052 chip
+#define ION_DEVICE_ID_GENERATION_4	0x03	// Watchport Family of products
+#define ION_GENERATION_MASK		0x03
+
+#define ION_DEVICE_ID_HUB_MASK		0x0080	// This bit in the PID designates a HUB device
+						// for example 8C would be a 421 4 port hub
+						// and 8D would be a 2 port embedded hub
+
+#define EDGEPORT_DEVICE_ID_MASK			0x0ff	// Not including OEM or GENERATION fields
+
+#define	ION_DEVICE_ID_UNCONFIGURED_EDGE_DEVICE	0x000	// In manufacturing only
+#define ION_DEVICE_ID_EDGEPORT_4		0x001	// Edgeport/4 RS232
+#define	ION_DEVICE_ID_EDGEPORT_8R		0x002	// Edgeport with RJ45 no Ring
+#define ION_DEVICE_ID_RAPIDPORT_4		0x003	// Rapidport/4
+#define ION_DEVICE_ID_EDGEPORT_4T		0x004	// Edgeport/4 RS232 for Telxon (aka "Fleetport")
+#define ION_DEVICE_ID_EDGEPORT_2		0x005	// Edgeport/2 RS232
+#define ION_DEVICE_ID_EDGEPORT_4I		0x006	// Edgeport/4 RS422
+#define ION_DEVICE_ID_EDGEPORT_2I		0x007	// Edgeport/2 RS422/RS485
+#define	ION_DEVICE_ID_EDGEPORT_8RR		0x008	// Edgeport with RJ45 with Data and RTS/CTS only
+//	ION_DEVICE_ID_EDGEPORT_8_HANDBUILT	0x009	// Hand-built Edgeport/8 (Placeholder, used in middle digit of serial number only!)
+//	ION_DEVICE_ID_MULTIMODEM_4X56		0x00A	// MultiTech version of RP/4 (Placeholder, used in middle digit of serial number only!)
+#define	ION_DEVICE_ID_EDGEPORT_PARALLEL_PORT	0x00B	// Edgeport/(4)21 Parallel port (USS720)
+#define	ION_DEVICE_ID_EDGEPORT_421		0x00C	// Edgeport/421 Hub+RS232+Parallel
+#define	ION_DEVICE_ID_EDGEPORT_21		0x00D	// Edgeport/21  RS232+Parallel
+#define ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU	0x00E	// Half of an Edgeport/8 (the kind with 2 EP/4s on 1 PCB)
+#define ION_DEVICE_ID_EDGEPORT_8		0x00F	// Edgeport/8 (single-CPU)
+#define ION_DEVICE_ID_EDGEPORT_2_DIN		0x010	// Edgeport/2 RS232 with Apple DIN connector
+#define ION_DEVICE_ID_EDGEPORT_4_DIN		0x011	// Edgeport/4 RS232 with Apple DIN connector
+#define ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU	0x012	// Half of an Edgeport/16 (the kind with 2 EP/8s)
+#define ION_DEVICE_ID_EDGEPORT_COMPATIBLE	0x013	// Edgeport Compatible, for NCR, Axiohm etc. testing
+#define ION_DEVICE_ID_EDGEPORT_8I		0x014	// Edgeport/8 RS422 (single-CPU)
+#define ION_DEVICE_ID_EDGEPORT_1		0x015	// Edgeport/1 RS232
+#define ION_DEVICE_ID_EPOS44			0x016	// Half of an EPOS/44 (TIUMP BASED)
+#define ION_DEVICE_ID_EDGEPORT_42		0x017	// Edgeport/42
+#define ION_DEVICE_ID_EDGEPORT_412_8		0x018	// Edgeport/412 8 port part
+#define ION_DEVICE_ID_EDGEPORT_412_4		0x019	// Edgeport/412	4 port part
+#define ION_DEVICE_ID_EDGEPORT_22I		0x01A	// Edgeport/22I is an Edgeport/4 with ports 1&2 RS422 and ports 3&4 RS232
+
+// Compact Form factor TI based devices  2c, 21c, 22c, 221c
+#define ION_DEVICE_ID_EDGEPORT_2C		0x01B	// Edgeport/2c is a TI based Edgeport/2 - Small I2c
+#define ION_DEVICE_ID_EDGEPORT_221C		0x01C	// Edgeport/221c is a TI based Edgeport/2 with lucent chip and
+							// 2 external hub ports - Large I2C
+#define ION_DEVICE_ID_EDGEPORT_22C		0x01D	// Edgeport/22c is a TI based Edgeport/2 with
+							// 2 external hub ports - Large I2C
+#define ION_DEVICE_ID_EDGEPORT_21C		0x01E	// Edgeport/21c is a TI based Edgeport/2 with lucent chip
+							// Small I2C
+
+
+/*
+ *  DANGER DANGER The 0x20 bit was used to indicate a 8251/netchip GEN 2 device.
+ *  Since the MAC, Linux, and Optimal drivers still used the old code
+ *  I suggest that you skip the 0x20 bit when creating new PIDs
+ */
+
+
+// Generation 3 devices -- 3410 based edgport/1 (256 byte I2C)
+#define ION_DEVICE_ID_TI3410_EDGEPORT_1		0x040	// Edgeport/1 RS232
+#define ION_DEVICE_ID_TI3410_EDGEPORT_1I	0x041	// Edgeport/1i- RS422 model
+
+// Ti based software switchable RS232/RS422/RS485 devices
+#define ION_DEVICE_ID_EDGEPORT_4S		0x042	// Edgeport/4s - software switchable model
+#define ION_DEVICE_ID_EDGEPORT_8S		0x043	// Edgeport/8s - software switchable model
+
+// Usb to Ethernet dongle
+#define ION_DEVICE_ID_EDGEPORT_E		0x0E0	// Edgeport/E Usb to Ethernet
+
+// Edgeport TI based devices
+#define ION_DEVICE_ID_TI_EDGEPORT_4		0x0201	// Edgeport/4 RS232
+#define ION_DEVICE_ID_TI_EDGEPORT_2		0x0205	// Edgeport/2 RS232
+#define ION_DEVICE_ID_TI_EDGEPORT_4I		0x0206	// Edgeport/4i RS422
+#define ION_DEVICE_ID_TI_EDGEPORT_2I		0x0207	// Edgeport/2i RS422/RS485
+#define ION_DEVICE_ID_TI_EDGEPORT_421		0x020C	// Edgeport/421 4 hub 2 RS232 + Parallel (lucent on a different hub port)
+#define ION_DEVICE_ID_TI_EDGEPORT_21		0x020D	// Edgeport/21 2 RS232 + Parallel (lucent on a different hub port)
+#define ION_DEVICE_ID_TI_EDGEPORT_416		0x0212  // Edgeport/416
+#define ION_DEVICE_ID_TI_EDGEPORT_1		0x0215	// Edgeport/1 RS232
+#define ION_DEVICE_ID_TI_EDGEPORT_42		0x0217	// Edgeport/42 4 hub 2 RS232
+#define ION_DEVICE_ID_TI_EDGEPORT_22I		0x021A	// Edgeport/22I is an Edgeport/4 with ports 1&2 RS422 and ports 3&4 RS232
+#define ION_DEVICE_ID_TI_EDGEPORT_2C		0x021B	// Edgeport/2c RS232
+#define ION_DEVICE_ID_TI_EDGEPORT_221C		0x021C	// Edgeport/221c is a TI based Edgeport/2 with lucent chip and
+							// 2 external hub ports - Large I2C
+#define ION_DEVICE_ID_TI_EDGEPORT_22C		0x021D	// Edgeport/22c is a TI based Edgeport/2 with
+							// 2 external hub ports - Large I2C
+#define ION_DEVICE_ID_TI_EDGEPORT_21C		0x021E	// Edgeport/21c is a TI based Edgeport/2 with lucent chip
+
+// Generation 3 devices -- 3410 based edgport/1 (256 byte I2C)
+#define ION_DEVICE_ID_TI_TI3410_EDGEPORT_1	0x0240	// Edgeport/1 RS232
+#define ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I	0x0241	// Edgeport/1i- RS422 model
+
+// Ti based software switchable RS232/RS422/RS485 devices
+#define ION_DEVICE_ID_TI_EDGEPORT_4S		0x0242	// Edgeport/4s - software switchable model
+#define ION_DEVICE_ID_TI_EDGEPORT_8S		0x0243	// Edgeport/8s - software switchable model
+#define ION_DEVICE_ID_TI_EDGEPORT_8		0x0244	// Edgeport/8 (single-CPU)
+#define ION_DEVICE_ID_TI_EDGEPORT_416B		0x0247	// Edgeport/416
+
+
+/************************************************************************
+ *
+ *                        Generation 4 devices
+ *
+ ************************************************************************/
+
+// Watchport based on 3410 both 1-wire and binary products (16K I2C)
+#define ION_DEVICE_ID_WP_UNSERIALIZED		0x300	// Watchport based on 3410 both 1-wire and binary products
+#define ION_DEVICE_ID_WP_PROXIMITY		0x301	// Watchport/P Discontinued
+#define ION_DEVICE_ID_WP_MOTION			0x302	// Watchport/M
+#define ION_DEVICE_ID_WP_MOISTURE		0x303	// Watchport/W
+#define ION_DEVICE_ID_WP_TEMPERATURE		0x304	// Watchport/T
+#define ION_DEVICE_ID_WP_HUMIDITY		0x305	// Watchport/H
+
+#define ION_DEVICE_ID_WP_POWER			0x306	// Watchport
+#define ION_DEVICE_ID_WP_LIGHT			0x307	// Watchport
+#define ION_DEVICE_ID_WP_RADIATION		0x308	// Watchport
+#define ION_DEVICE_ID_WP_ACCELERATION		0x309	// Watchport/A
+#define ION_DEVICE_ID_WP_DISTANCE		0x30A	// Watchport/D Discontinued
+#define ION_DEVICE_ID_WP_PROX_DIST		0x30B	// Watchport/D uses distance sensor
+							// Default to /P function
+
+#define ION_DEVICE_ID_PLUS_PWR_HP4CD		0x30C	// 5052 Plus Power HubPort/4CD+ (for Dell)
+#define ION_DEVICE_ID_PLUS_PWR_HP4C		0x30D	// 5052 Plus Power HubPort/4C+
+#define ION_DEVICE_ID_PLUS_PWR_PCI		0x30E	// 3410 Plus Power PCI Host Controller 4 port
+
+
+//
+// Definitions for AXIOHM USB product IDs
+//
+#define	USB_VENDOR_ID_AXIOHM			0x05D9	// Axiohm VID
+
+#define AXIOHM_DEVICE_ID_MASK			0xffff
+#define AXIOHM_DEVICE_ID_EPIC_A758		0xA758
+#define AXIOHM_DEVICE_ID_EPIC_A794		0xA794
+#define AXIOHM_DEVICE_ID_EPIC_A225		0xA225
+
+
+//
+// Definitions for NCR USB product IDs
+//
+#define	USB_VENDOR_ID_NCR			0x0404	// NCR VID
+
+#define NCR_DEVICE_ID_MASK			0xffff
+#define NCR_DEVICE_ID_EPIC_0202			0x0202
+#define NCR_DEVICE_ID_EPIC_0203			0x0203
+#define NCR_DEVICE_ID_EPIC_0310			0x0310
+#define NCR_DEVICE_ID_EPIC_0311			0x0311
+#define NCR_DEVICE_ID_EPIC_0312			0x0312
+
+
+//
+// Definitions for SYMBOL USB product IDs
+//
+#define USB_VENDOR_ID_SYMBOL			0x05E0	// Symbol VID
+#define SYMBOL_DEVICE_ID_MASK			0xffff
+#define SYMBOL_DEVICE_ID_KEYFOB			0x0700
+
+
+//
+// Definitions for other product IDs
+#define ION_DEVICE_ID_MT4X56USB			0x1403	// OEM device
+#define ION_DEVICE_ID_E5805A			0x1A01  // OEM device (rebranded Edgeport/4)
+
+
+#define	GENERATION_ID_FROM_USB_PRODUCT_ID(ProductId)				\
+			((__u16) ((ProductId >> 8) & (ION_GENERATION_MASK)))
+
+#define	MAKE_USB_PRODUCT_ID(OemId, DeviceId)					\
+			((__u16) (((OemId) << 10) || (DeviceId)))
+
+#define	DEVICE_ID_FROM_USB_PRODUCT_ID(ProductId)				\
+			((__u16) ((ProductId) & (EDGEPORT_DEVICE_ID_MASK)))
+
+#define	OEM_ID_FROM_USB_PRODUCT_ID(ProductId)					\
+			((__u16) (((ProductId) >> 10) & 0x3F))
+
+//
+// Definitions of parameters for download code. Note that these are
+// specific to a given version of download code and must change if the
+// corresponding download code changes.
+//
+
+// TxCredits value below which driver won't bother sending (to prevent too many small writes).
+// Send only if above 25%
+#define EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(InitialCredit, MaxPacketSize) (max(((InitialCredit) / 4), (MaxPacketSize)))
+
+#define	EDGE_FW_BULK_MAX_PACKET_SIZE		64	// Max Packet Size for Bulk In Endpoint (EP1)
+#define EDGE_FW_BULK_READ_BUFFER_SIZE		1024	// Size to use for Bulk reads
+
+#define	EDGE_FW_INT_MAX_PACKET_SIZE		32	// Max Packet Size for Interrupt In Endpoint
+							// Note that many units were shipped with MPS=16, we
+							// force an upgrade to this value).
+#define EDGE_FW_INT_INTERVAL			2	// 2ms polling on IntPipe
+
+
+//
+// Definitions of I/O Networks vendor-specific requests
+// for default endpoint
+//
+//	bmRequestType = 01000000	Set vendor-specific, to device
+//	bmRequestType = 11000000	Get vendor-specific, to device
+//
+// These are the definitions for the bRequest field for the
+// above bmRequestTypes.
+//
+// For the read/write Edgeport memory commands, the parameters
+// are as follows:
+//		wValue = 16-bit address
+//		wIndex = unused (though we could put segment 00: or FF: here)
+//		wLength = # bytes to read/write (max 64)
+//
+
+#define USB_REQUEST_ION_RESET_DEVICE	0	// Warm reboot Edgeport, retaining USB address
+#define USB_REQUEST_ION_GET_EPIC_DESC	1	// Get Edgeport Compatibility Descriptor
+// unused				2	// Unused, available
+#define USB_REQUEST_ION_READ_RAM	3	// Read  EdgePort RAM at specified addr
+#define USB_REQUEST_ION_WRITE_RAM	4	// Write EdgePort RAM at specified addr
+#define USB_REQUEST_ION_READ_ROM	5	// Read  EdgePort ROM at specified addr
+#define USB_REQUEST_ION_WRITE_ROM	6	// Write EdgePort ROM at specified addr
+#define USB_REQUEST_ION_EXEC_DL_CODE	7	// Begin execution of RAM-based download
+						// code by jumping to address in wIndex:wValue
+//					8	// Unused, available
+#define USB_REQUEST_ION_ENABLE_SUSPEND	9	// Enable/Disable suspend feature
+						// (wValue != 0: Enable; wValue = 0: Disable)
+
+#define USB_REQUEST_ION_SEND_IOSP	10	// Send an IOSP command to the edgeport over the control pipe
+#define USB_REQUEST_ION_RECV_IOSP	11	// Receive an IOSP command from the edgeport over the control pipe
+
+
+#define USB_REQUEST_ION_DIS_INT_TIMER	0x80	// Sent to Axiohm to enable/ disable
+						// interrupt token timer
+						// wValue = 1, enable (default)
+						// wValue = 0, disable
+
+//
+// Define parameter values for our vendor-specific commands
+//
+
+//
+// Edgeport Compatibility Descriptor
+//
+// This descriptor is only returned by Edgeport-compatible devices
+// supporting the EPiC spec. True ION devices do not return this
+// descriptor, but instead return STALL on receipt of the
+// GET_EPIC_DESC command. The driver interprets a STALL to mean that
+// this is a "real" Edgeport.
+//
+
+struct edge_compatibility_bits {
+	// This __u32 defines which Vendor-specific commands/functionality
+	// the device supports on the default EP0 pipe.
+
+	__u32	VendEnableSuspend	:  1;	// 0001 Set if device supports ION_ENABLE_SUSPEND
+	__u32	VendUnused		: 31;	// Available for future expansion, must be 0
+
+	// This __u32 defines which IOSP commands are supported over the
+	// bulk pipe EP1.
+
+											// xxxx Set if device supports:
+	__u32	IOSPOpen		:  1;	// 0001	OPEN / OPEN_RSP (Currently must be 1)
+	__u32	IOSPClose		:  1;	// 0002	CLOSE
+	__u32	IOSPChase		:  1;	// 0004	CHASE / CHASE_RSP
+	__u32	IOSPSetRxFlow		:  1;	// 0008	SET_RX_FLOW
+	__u32	IOSPSetTxFlow		:  1;	// 0010	SET_TX_FLOW
+	__u32	IOSPSetXChar		:  1;	// 0020	SET_XON_CHAR/SET_XOFF_CHAR
+	__u32	IOSPRxCheck		:  1;	// 0040	RX_CHECK_REQ/RX_CHECK_RSP
+	__u32	IOSPSetClrBreak		:  1;	// 0080	SET_BREAK/CLEAR_BREAK
+	__u32	IOSPWriteMCR		:  1;	// 0100	MCR register writes (set/clr DTR/RTS)
+	__u32	IOSPWriteLCR		:  1;	// 0200	LCR register writes (wordlen/stop/parity)
+	__u32	IOSPSetBaudRate		:  1;	// 0400	setting Baud rate (writes to LCR.80h and DLL/DLM register)
+	__u32	IOSPDisableIntPipe	:  1;	// 0800 Do not use the interrupt pipe for TxCredits or RxButesAvailable
+	__u32	IOSPRxDataAvail		:  1;   // 1000 Return status of RX Fifo (Data available in Fifo)
+	__u32	IOSPTxPurge		:  1;	// 2000 Purge TXBuffer and/or Fifo in Edgeport hardware
+	__u32	IOSPUnused		: 18;	// Available for future expansion, must be 0
+
+	// This __u32 defines which 'general' features are supported
+
+	__u32	TrueEdgeport		:  1;	// 0001	Set if device is a 'real' Edgeport
+											// (Used only by driver, NEVER set by an EPiC device)
+	__u32	GenUnused		: 31;	// Available for future expansion, must be 0
+};
+
+#define EDGE_COMPATIBILITY_MASK0	0x0001
+#define EDGE_COMPATIBILITY_MASK1	0x3FFF
+#define EDGE_COMPATIBILITY_MASK2	0x0001
+
+struct edge_compatibility_descriptor {
+	__u8	Length;				// Descriptor Length (per USB spec)
+	__u8	DescType;			// Descriptor Type (per USB spec, =DEVICE type)
+	__u8	EpicVer;			// Version of EPiC spec supported
+						// (Currently must be 1)
+	__u8	NumPorts;			// Number of serial ports supported
+	__u8	iDownloadFile;			// Index of string containing download code filename
+						// 0=no download, FF=download compiled into driver.
+	__u8	Unused[3];			// Available for future expansion, must be 0
+						// (Currently must be 0).
+	__u8	MajorVersion;			// Firmware version: xx.
+	__u8	MinorVersion;			//  yy.
+	__le16	BuildNumber;			//  zzzz (LE format)
+
+	// The following structure contains __u32s, with each bit
+	// specifying whether the EPiC device supports the given
+	// command or functionality.
+	struct edge_compatibility_bits	Supports;
+};
+
+// Values for iDownloadFile
+#define	EDGE_DOWNLOAD_FILE_NONE		0	// No download requested
+#define	EDGE_DOWNLOAD_FILE_INTERNAL	0xFF	// Download the file compiled into driver (930 version)
+#define	EDGE_DOWNLOAD_FILE_I930		0xFF	// Download the file compiled into driver (930 version)
+#define	EDGE_DOWNLOAD_FILE_80251	0xFE	// Download the file compiled into driver (80251 version)
+
+
+
+/*
+ *	Special addresses for READ/WRITE_RAM/ROM
+ */
+
+// Version 1 (original) format of DeviceParams
+#define	EDGE_MANUF_DESC_ADDR_V1		0x00FF7F00
+#define	EDGE_MANUF_DESC_LEN_V1		sizeof(EDGE_MANUF_DESCRIPTOR_V1)
+
+// Version 2 format of DeviceParams. This format is longer (3C0h)
+// and starts lower in memory, at the uppermost 1K in ROM.
+#define	EDGE_MANUF_DESC_ADDR		0x00FF7C00
+#define	EDGE_MANUF_DESC_LEN		sizeof(struct edge_manuf_descriptor)
+
+// Boot params descriptor
+#define	EDGE_BOOT_DESC_ADDR		0x00FF7FC0
+#define	EDGE_BOOT_DESC_LEN		sizeof(struct edge_boot_descriptor)
+
+// Define the max block size that may be read or written
+// in a read/write RAM/ROM command.
+#define	MAX_SIZE_REQ_ION_READ_MEM	((__u16)64)
+#define	MAX_SIZE_REQ_ION_WRITE_MEM	((__u16)64)
+
+
+//
+// Notes for the following two ION vendor-specific param descriptors:
+//
+//	1.	These have a standard USB descriptor header so they look like a
+//		normal descriptor.
+//	2.	Any strings in the structures are in USB-defined string
+//		descriptor format, so that they may be separately retrieved,
+//		if necessary, with a minimum of work on the 930. This also
+//		requires them to be in UNICODE format, which, for English at
+//		least, simply means extending each __u8 into a __u16.
+//	3.	For all fields, 00 means 'uninitialized'.
+//	4.	All unused areas should be set to 00 for future expansion.
+//
+
+// This structure is ver 2 format. It contains ALL USB descriptors as
+// well as the configuration parameters that were in the original V1
+// structure. It is NOT modified when new boot code is downloaded; rather,
+// these values are set or modified by manufacturing. It is located at
+// xC00-xFBF (length 3C0h) in the ROM.
+// This structure is a superset of the v1 structure and is arranged so
+// that all of the v1 fields remain at the same address. We are just
+// adding more room to the front of the structure to hold the descriptors.
+//
+// The actual contents of this structure are defined in a 930 assembly
+// file, converted to a binary image, and then written by the serialization
+// program. The C definition of this structure just defines a dummy
+// area for general USB descriptors and the descriptor tables (the root
+// descriptor starts at xC00). At the bottom of the structure are the
+// fields inherited from the v1 structure.
+
+#define MAX_SERIALNUMBER_LEN	12
+#define MAX_ASSEMBLYNUMBER_LEN	14
+
+struct edge_manuf_descriptor {
+
+	__u16	RootDescTable[0x10];			// C00 Root of descriptor tables (just a placeholder)
+	__u8	DescriptorArea[0x2E0];			// C20 Descriptors go here, up to 2E0h (just a placeholder)
+
+							//     Start of v1-compatible section
+	__u8	Length;					// F00 Desc length for what follows, per USB (= C0h )
+	__u8	DescType;				// F01 Desc type, per USB (=DEVICE type)
+	__u8	DescVer;				// F02 Desc version/format (currently 2)
+	__u8	NumRootDescEntries;			// F03 # entries in RootDescTable
+
+	__u8	RomSize;				// F04 Size of ROM/E2PROM in K
+	__u8	RamSize;				// F05 Size of external RAM in K
+	__u8	CpuRev;					// F06 CPU revision level (chg only if s/w visible)
+	__u8	BoardRev;				// F07 PCB revision level (chg only if s/w visible)
+
+	__u8	NumPorts;				// F08 Number of ports
+	__u8	DescDate[3];				// F09 MM/DD/YY when descriptor template was compiler,
+							//     so host can track changes to USB-only descriptors.
+
+	__u8	SerNumLength;				// F0C USB string descriptor len
+	__u8	SerNumDescType;				// F0D USB descriptor type (=STRING type)
+	__le16	SerialNumber[MAX_SERIALNUMBER_LEN];	// F0E "01-01-000100" Unicode Serial Number
+
+	__u8	AssemblyNumLength;			// F26 USB string descriptor len
+	__u8	AssemblyNumDescType;			// F27 USB descriptor type (=STRING type)
+	__le16	AssemblyNumber[MAX_ASSEMBLYNUMBER_LEN];	// F28 "350-1000-01-A " assembly number
+
+	__u8	OemAssyNumLength;			// F44 USB string descriptor len
+	__u8	OemAssyNumDescType;			// F45 USB descriptor type (=STRING type)
+	__le16	OemAssyNumber[MAX_ASSEMBLYNUMBER_LEN];	// F46 "xxxxxxxxxxxxxx" OEM assembly number
+
+	__u8	ManufDateLength;			// F62 USB string descriptor len
+	__u8	ManufDateDescType;			// F63 USB descriptor type (=STRING type)
+	__le16	ManufDate[6];				// F64 "MMDDYY" manufacturing date
+
+	__u8	Reserved3[0x4D];			// F70 -- unused, set to 0 --
+
+	__u8	UartType;				// FBD Uart Type
+	__u8	IonPid;					// FBE Product ID, == LSB of USB DevDesc.PID
+							//      (Note: Edgeport/4s before 11/98 will have
+							//       00 here instead of 01)
+	__u8	IonConfig;				// FBF Config byte for ION manufacturing use
+							// FBF end of structure, total len = 3C0h
+
+};
+
+
+#define MANUF_DESC_VER_1	1	// Original definition of MANUF_DESC
+#define MANUF_DESC_VER_2	2	// Ver 2, starts at xC00h len 3C0h
+
+
+// Uart Types
+// Note: Since this field was added only recently, all Edgeport/4 units
+// shipped before 11/98 will have 00 in this field. Therefore,
+// both 00 and 01 values mean '654.
+#define MANUF_UART_EXAR_654_EARLY	0	// Exar 16C654 in Edgeport/4s before 11/98
+#define MANUF_UART_EXAR_654		1	// Exar 16C654
+#define MANUF_UART_EXAR_2852		2	// Exar 16C2852
+
+//
+// Note: The CpuRev and BoardRev values do not conform to manufacturing
+// revisions; they are to be incremented only when the CPU or hardware
+// changes in a software-visible way, such that the 930 software or
+// the host driver needs to handle the hardware differently.
+//
+
+// Values of bottom 5 bits of CpuRev & BoardRev for
+// Implementation 0 (ie, 930-based)
+#define	MANUF_CPU_REV_AD4		1	// 930 AD4, with EP1 Rx bug (needs RXSPM)
+#define	MANUF_CPU_REV_AD5		2	// 930 AD5, with above bug (supposedly) fixed
+#define	MANUF_CPU_80251			0x20	// Intel 80251
+
+
+#define MANUF_BOARD_REV_A		1	// Original version, == Manuf Rev A
+#define MANUF_BOARD_REV_B		2	// Manuf Rev B, wakeup interrupt works
+#define MANUF_BOARD_REV_C		3	// Manuf Rev C, 2/4 ports, rs232/rs422
+#define MANUF_BOARD_REV_GENERATION_2	0x20	// Second generaiton edgeport
+
+
+// Values of bottom 5 bits of CpuRev & BoardRev for
+// Implementation 1 (ie, 251+Netchip-based)
+#define	MANUF_CPU_REV_1			1	// C251TB Rev 1 (Need actual Intel rev here)
+
+#define MANUF_BOARD_REV_A		1	// First rev of 251+Netchip design
+
+#define	MANUF_SERNUM_LENGTH		sizeof(((struct edge_manuf_descriptor *)0)->SerialNumber)
+#define	MANUF_ASSYNUM_LENGTH		sizeof(((struct edge_manuf_descriptor *)0)->AssemblyNumber)
+#define	MANUF_OEMASSYNUM_LENGTH		sizeof(((struct edge_manuf_descriptor *)0)->OemAssyNumber)
+#define	MANUF_MANUFDATE_LENGTH		sizeof(((struct edge_manuf_descriptor *)0)->ManufDate)
+
+#define	MANUF_ION_CONFIG_DIAG_NO_LOOP	0x20	// As below but no ext loopback test
+#define	MANUF_ION_CONFIG_DIAG		0x40	// 930 based device: 1=Run h/w diags, 0=norm
+						// TIUMP Device    : 1=IONSERIAL needs to run Final Test
+#define	MANUF_ION_CONFIG_MASTER		0x80	// 930 based device:  1=Master mode, 0=Normal
+						// TIUMP Device    :  1=First device on a multi TIUMP Device
+
+//
+// This structure describes parameters for the boot code, and
+// is programmed along with new boot code. These are values
+// which are specific to a given build of the boot code. It
+// is exactly 64 bytes long and is fixed at address FF:xFC0
+// - FF:xFFF. Note that the 930-mandated UCONFIG bytes are
+// included in this structure.
+//
+struct edge_boot_descriptor {
+	__u8		Length;			// C0 Desc length, per USB (= 40h)
+	__u8		DescType;		// C1 Desc type, per USB (= DEVICE type)
+	__u8		DescVer;		// C2 Desc version/format
+	__u8		Reserved1;		// C3 -- unused, set to 0 --
+
+	__le16		BootCodeLength;		// C4 Boot code goes from FF:0000 to FF:(len-1)
+						//	  (LE format)
+
+	__u8		MajorVersion;		// C6 Firmware version: xx.
+	__u8		MinorVersion;		// C7			yy.
+	__le16		BuildNumber;		// C8			zzzz (LE format)
+
+	__u16		EnumRootDescTable;	// CA Root of ROM-based descriptor table
+	__u8		NumDescTypes;		// CC Number of supported descriptor types
+
+	__u8		Reserved4;		// CD Fix Compiler Packing
+
+	__le16		Capabilities;		// CE-CF Capabilities flags (LE format)
+	__u8		Reserved2[0x28];	// D0 -- unused, set to 0 --
+	__u8		UConfig0;		// F8 930-defined CPU configuration byte 0
+	__u8		UConfig1;		// F9 930-defined CPU configuration byte 1
+	__u8		Reserved3[6];		// FA -- unused, set to 0 --
+						// FF end of structure, total len = 80
+};
+
+
+#define BOOT_DESC_VER_1		1	// Original definition of BOOT_PARAMS
+#define BOOT_DESC_VER_2		2	// 2nd definition, descriptors not included in boot
+
+
+	// Capabilities flags
+
+#define	BOOT_CAP_RESET_CMD	0x0001	// If set, boot correctly supports ION_RESET_DEVICE
+
+
+/************************************************************************
+                 T I   U M P   D E F I N I T I O N S
+ ***********************************************************************/
+
+// Chip definitions in I2C
+#define UMP5152			0x52
+#define UMP3410			0x10
+
+
+//************************************************************************
+//	TI I2C Format Definitions
+//************************************************************************
+#define I2C_DESC_TYPE_INFO_BASIC	0x01
+#define I2C_DESC_TYPE_FIRMWARE_BASIC	0x02
+#define I2C_DESC_TYPE_DEVICE		0x03
+#define I2C_DESC_TYPE_CONFIG		0x04
+#define I2C_DESC_TYPE_STRING		0x05
+#define I2C_DESC_TYPE_FIRMWARE_AUTO	0x07	// for 3410 download
+#define I2C_DESC_TYPE_CONFIG_KLUDGE	0x14	// for 3410
+#define I2C_DESC_TYPE_WATCHPORT_VERSION	0x15	// firmware version number for watchport
+#define I2C_DESC_TYPE_WATCHPORT_CALIBRATION_DATA 0x16	// Watchport Calibration Data
+
+#define I2C_DESC_TYPE_FIRMWARE_BLANK	0xf2
+
+// Special section defined by ION
+#define I2C_DESC_TYPE_ION		0	// Not defined by TI
+
+
+struct ti_i2c_desc {
+	__u8	Type;			// Type of descriptor
+	__le16	Size;			// Size of data only not including header
+	__u8	CheckSum;		// Checksum (8 bit sum of data only)
+	__u8	Data[];		// Data starts here
+} __attribute__((packed));
+
+// for 5152 devices only (type 2 record)
+// for 3410 the version is stored in the WATCHPORT_FIRMWARE_VERSION descriptor
+struct ti_i2c_firmware_rec {
+	__u8	Ver_Major;		// Firmware Major version number
+	__u8	Ver_Minor;		// Firmware Minor version number
+	__u8	Data[];		// Download starts here
+} __attribute__((packed));
+
+
+struct watchport_firmware_version {
+// Added 2 bytes for version number
+	__u8	Version_Major;		//  Download Version (for Watchport)
+	__u8	Version_Minor;
+} __attribute__((packed));
+
+
+// Structure of header of download image in fw_down.h
+struct ti_i2c_image_header {
+	__le16	Length;
+	__u8	CheckSum;
+} __attribute__((packed));
+
+struct ti_basic_descriptor {
+	__u8	Power;		// Self powered
+				// bit 7: 1 - power switching supported
+				//        0 - power switching not supported
+				//
+				// bit 0: 1 - self powered
+				//        0 - bus powered
+				//
+				//
+	__u16	HubVid;		// VID HUB
+	__u16	HubPid;		// PID HUB
+	__u16	DevPid;		// PID Edgeport
+	__u8	HubTime;	// Time for power on to power good
+	__u8	HubCurrent;	// HUB Current = 100ma
+} __attribute__((packed));
+
+
+// CPU / Board Rev Definitions
+#define TI_CPU_REV_5052			2	// 5052 based edgeports
+#define TI_CPU_REV_3410			3	// 3410 based edgeports
+
+#define TI_BOARD_REV_TI_EP		0	// Basic ti based edgeport
+#define TI_BOARD_REV_COMPACT		1	// Compact board
+#define TI_BOARD_REV_WATCHPORT		2	// Watchport
+
+
+#define TI_GET_CPU_REVISION(x)		(__u8)((((x)>>4)&0x0f))
+#define TI_GET_BOARD_REVISION(x)	(__u8)(((x)&0x0f))
+
+#define TI_I2C_SIZE_MASK		0x1f  // 5 bits
+#define TI_GET_I2C_SIZE(x)		((((x) & TI_I2C_SIZE_MASK)+1)*256)
+
+#define TI_MAX_I2C_SIZE			(16 * 1024)
+
+#define TI_MANUF_VERSION_0		0
+
+// IonConig2 flags
+#define TI_CONFIG2_RS232		0x01
+#define TI_CONFIG2_RS422		0x02
+#define TI_CONFIG2_RS485		0x04
+#define TI_CONFIG2_SWITCHABLE		0x08
+
+#define TI_CONFIG2_WATCHPORT		0x10
+
+
+struct edge_ti_manuf_descriptor {
+	__u8 IonConfig;		//  Config byte for ION manufacturing use
+	__u8 IonConfig2;	//  Expansion
+	__u8 Version;		//  Version
+	__u8 CpuRev_BoardRev;	//  CPU revision level (0xF0) and Board Rev Level (0x0F)
+	__u8 NumPorts;		//  Number of ports	for this UMP
+	__u8 NumVirtualPorts;	//  Number of Virtual ports
+	__u8 HubConfig1;	//  Used to configure the Hub
+	__u8 HubConfig2;	//  Used to configure the Hub
+	__u8 TotalPorts;	//  Total Number of Com Ports for the entire device (All UMPs)
+	__u8 Reserved;		//  Reserved
+} __attribute__((packed));
+
+
+#endif		// if !defined(_USBVEND_H)
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
new file mode 100644
index 000000000..e11441bac
--- /dev/null
+++ b/drivers/usb/serial/ipaq.c
@@ -0,0 +1,608 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * USB Compaq iPAQ driver
+ *
+ *	Copyright (C) 2001 - 2002
+ *	    Ganesh Varadarajan <ganesh@veritas.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define KP_RETRIES	100
+
+#define DRIVER_AUTHOR "Ganesh Varadarajan <ganesh@veritas.com>"
+#define DRIVER_DESC "USB PocketPC PDA driver"
+
+static int connect_retries = KP_RETRIES;
+static int initial_wait;
+
+/* Function prototypes for an ipaq */
+static int  ipaq_open(struct tty_struct *tty,
+			struct usb_serial_port *port);
+static int ipaq_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds);
+static int  ipaq_startup(struct usb_serial *serial);
+
+static const struct usb_device_id ipaq_id_table[] = {
+	{ USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */
+	{ USB_DEVICE(0x03F0, 0x1016) }, /* HP USB Sync */
+	{ USB_DEVICE(0x03F0, 0x1116) }, /* HP USB Sync 1611 */
+	{ USB_DEVICE(0x03F0, 0x1216) }, /* HP USB Sync 1612 */
+	{ USB_DEVICE(0x03F0, 0x2016) }, /* HP USB Sync 1620 */
+	{ USB_DEVICE(0x03F0, 0x2116) }, /* HP USB Sync 1621 */
+	{ USB_DEVICE(0x03F0, 0x2216) }, /* HP USB Sync 1622 */
+	{ USB_DEVICE(0x03F0, 0x3016) }, /* HP USB Sync 1630 */
+	{ USB_DEVICE(0x03F0, 0x3116) }, /* HP USB Sync 1631 */
+	{ USB_DEVICE(0x03F0, 0x3216) }, /* HP USB Sync 1632 */
+	{ USB_DEVICE(0x03F0, 0x4016) }, /* HP USB Sync 1640 */
+	{ USB_DEVICE(0x03F0, 0x4116) }, /* HP USB Sync 1641 */
+	{ USB_DEVICE(0x03F0, 0x4216) }, /* HP USB Sync 1642 */
+	{ USB_DEVICE(0x03F0, 0x5016) }, /* HP USB Sync 1650 */
+	{ USB_DEVICE(0x03F0, 0x5116) }, /* HP USB Sync 1651 */
+	{ USB_DEVICE(0x03F0, 0x5216) }, /* HP USB Sync 1652 */
+	{ USB_DEVICE(0x0409, 0x00D5) }, /* NEC USB Sync */
+	{ USB_DEVICE(0x0409, 0x00D6) }, /* NEC USB Sync */
+	{ USB_DEVICE(0x0409, 0x00D7) }, /* NEC USB Sync */
+	{ USB_DEVICE(0x0409, 0x8024) }, /* NEC USB Sync */
+	{ USB_DEVICE(0x0409, 0x8025) }, /* NEC USB Sync */
+	{ USB_DEVICE(0x043E, 0x9C01) }, /* LGE USB Sync */
+	{ USB_DEVICE(0x045E, 0x00CE) }, /* Microsoft USB Sync */
+	{ USB_DEVICE(0x045E, 0x0400) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0401) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0402) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0403) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0404) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0405) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0406) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0407) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0408) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0409) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x040A) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x040B) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x040C) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x040D) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x040E) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x040F) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0410) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0411) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0412) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0413) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0414) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0415) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0416) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0417) }, /* Windows Powered Pocket PC 2002 */
+	{ USB_DEVICE(0x045E, 0x0432) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0433) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0434) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0435) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0436) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0437) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0438) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0439) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x043A) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x043B) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x043C) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x043D) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x043E) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x043F) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0440) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0441) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0442) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0443) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0444) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0445) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0446) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0447) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0448) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0449) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x044A) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x044B) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x044C) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x044D) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x044E) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x044F) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0450) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0451) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0452) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0453) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0454) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0455) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0456) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0457) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0458) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0459) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x045A) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x045B) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x045C) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x045D) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x045E) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x045F) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0460) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0461) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0462) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0463) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0464) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0465) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0466) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0467) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0468) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0469) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x046A) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x046B) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x046C) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x046D) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x046E) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x046F) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0470) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0471) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0472) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0473) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0474) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0475) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0476) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0477) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0478) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x0479) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x047A) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x047B) }, /* Windows Powered Pocket PC 2003 */
+	{ USB_DEVICE(0x045E, 0x04C8) }, /* Windows Powered Smartphone 2002 */
+	{ USB_DEVICE(0x045E, 0x04C9) }, /* Windows Powered Smartphone 2002 */
+	{ USB_DEVICE(0x045E, 0x04CA) }, /* Windows Powered Smartphone 2002 */
+	{ USB_DEVICE(0x045E, 0x04CB) }, /* Windows Powered Smartphone 2002 */
+	{ USB_DEVICE(0x045E, 0x04CC) }, /* Windows Powered Smartphone 2002 */
+	{ USB_DEVICE(0x045E, 0x04CD) }, /* Windows Powered Smartphone 2002 */
+	{ USB_DEVICE(0x045E, 0x04CE) }, /* Windows Powered Smartphone 2002 */
+	{ USB_DEVICE(0x045E, 0x04D7) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04D8) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04D9) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04DA) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04DB) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04DC) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04DD) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04DE) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04DF) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04E0) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04E1) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04E2) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04E3) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04E4) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04E5) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04E6) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04E7) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04E8) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04E9) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x045E, 0x04EA) }, /* Windows Powered Smartphone 2003 */
+	{ USB_DEVICE(0x049F, 0x0003) }, /* Compaq iPAQ USB Sync */
+	{ USB_DEVICE(0x049F, 0x0032) }, /* Compaq iPAQ USB Sync */
+	{ USB_DEVICE(0x04A4, 0x0014) }, /* Hitachi USB Sync */
+	{ USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */
+	{ USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */
+	{ USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */
+	{ USB_DEVICE(0x04AD, 0x0306) }, /* GPS Pocket PC USB Sync */
+	{ USB_DEVICE(0x04B7, 0x0531) }, /* MyGuide 7000 XL USB Sync */
+	{ USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */
+	{ USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */
+	{ USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */
+	{ USB_DEVICE(0x04DD, 0x9102) }, /* SHARP WS003SH USB Modem */
+	{ USB_DEVICE(0x04DD, 0x9121) }, /* SHARP WS004SH USB Modem */
+	{ USB_DEVICE(0x04DD, 0x9123) }, /* SHARP WS007SH USB Modem */
+	{ USB_DEVICE(0x04DD, 0x9151) }, /* SHARP S01SH USB Modem */
+	{ USB_DEVICE(0x04DD, 0x91AC) }, /* SHARP WS011SH USB Modem */
+	{ USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */
+	{ USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */
+	{ USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */
+	{ USB_DEVICE(0x04E8, 0x5F03) }, /* Samsung NEXiO USB Sync */
+	{ USB_DEVICE(0x04E8, 0x5F04) }, /* Samsung NEXiO USB Sync */
+	{ USB_DEVICE(0x04E8, 0x6611) }, /* Samsung MITs USB Sync */
+	{ USB_DEVICE(0x04E8, 0x6613) }, /* Samsung MITs USB Sync */
+	{ USB_DEVICE(0x04E8, 0x6615) }, /* Samsung MITs USB Sync */
+	{ USB_DEVICE(0x04E8, 0x6617) }, /* Samsung MITs USB Sync */
+	{ USB_DEVICE(0x04E8, 0x6619) }, /* Samsung MITs USB Sync */
+	{ USB_DEVICE(0x04E8, 0x661B) }, /* Samsung MITs USB Sync */
+	{ USB_DEVICE(0x04E8, 0x662E) }, /* Samsung MITs USB Sync */
+	{ USB_DEVICE(0x04E8, 0x6630) }, /* Samsung MITs USB Sync */
+	{ USB_DEVICE(0x04E8, 0x6632) }, /* Samsung MITs USB Sync */
+	{ USB_DEVICE(0x04f1, 0x3011) }, /* JVC USB Sync */
+	{ USB_DEVICE(0x04F1, 0x3012) }, /* JVC USB Sync */
+	{ USB_DEVICE(0x0502, 0x1631) }, /* c10 Series */
+	{ USB_DEVICE(0x0502, 0x1632) }, /* c20 Series */
+	{ USB_DEVICE(0x0502, 0x16E1) }, /* Acer n10 Handheld USB Sync */
+	{ USB_DEVICE(0x0502, 0x16E2) }, /* Acer n20 Handheld USB Sync */
+	{ USB_DEVICE(0x0502, 0x16E3) }, /* Acer n30 Handheld USB Sync */
+	{ USB_DEVICE(0x0536, 0x01A0) }, /* HHP PDT */
+	{ USB_DEVICE(0x0543, 0x0ED9) }, /* ViewSonic Color Pocket PC V35 */
+	{ USB_DEVICE(0x0543, 0x1527) }, /* ViewSonic Color Pocket PC V36 */
+	{ USB_DEVICE(0x0543, 0x1529) }, /* ViewSonic Color Pocket PC V37 */
+	{ USB_DEVICE(0x0543, 0x152B) }, /* ViewSonic Color Pocket PC V38 */
+	{ USB_DEVICE(0x0543, 0x152E) }, /* ViewSonic Pocket PC */
+	{ USB_DEVICE(0x0543, 0x1921) }, /* ViewSonic Communicator Pocket PC */
+	{ USB_DEVICE(0x0543, 0x1922) }, /* ViewSonic Smartphone */
+	{ USB_DEVICE(0x0543, 0x1923) }, /* ViewSonic Pocket PC V30 */
+	{ USB_DEVICE(0x05E0, 0x2000) }, /* Symbol USB Sync */
+	{ USB_DEVICE(0x05E0, 0x2001) }, /* Symbol USB Sync 0x2001 */
+	{ USB_DEVICE(0x05E0, 0x2002) }, /* Symbol USB Sync 0x2002 */
+	{ USB_DEVICE(0x05E0, 0x2003) }, /* Symbol USB Sync 0x2003 */
+	{ USB_DEVICE(0x05E0, 0x2004) }, /* Symbol USB Sync 0x2004 */
+	{ USB_DEVICE(0x05E0, 0x2005) }, /* Symbol USB Sync 0x2005 */
+	{ USB_DEVICE(0x05E0, 0x2006) }, /* Symbol USB Sync 0x2006 */
+	{ USB_DEVICE(0x05E0, 0x2007) }, /* Symbol USB Sync 0x2007 */
+	{ USB_DEVICE(0x05E0, 0x2008) }, /* Symbol USB Sync 0x2008 */
+	{ USB_DEVICE(0x05E0, 0x2009) }, /* Symbol USB Sync 0x2009 */
+	{ USB_DEVICE(0x05E0, 0x200A) }, /* Symbol USB Sync 0x200A */
+	{ USB_DEVICE(0x067E, 0x1001) }, /* Intermec Mobile Computer */
+	{ USB_DEVICE(0x07CF, 0x2001) }, /* CASIO USB Sync 2001 */
+	{ USB_DEVICE(0x07CF, 0x2002) }, /* CASIO USB Sync 2002 */
+	{ USB_DEVICE(0x07CF, 0x2003) }, /* CASIO USB Sync 2003 */
+	{ USB_DEVICE(0x0930, 0x0700) }, /* TOSHIBA USB Sync 0700 */
+	{ USB_DEVICE(0x0930, 0x0705) }, /* TOSHIBA Pocket PC e310 */
+	{ USB_DEVICE(0x0930, 0x0706) }, /* TOSHIBA Pocket PC e740 */
+	{ USB_DEVICE(0x0930, 0x0707) }, /* TOSHIBA Pocket PC e330 Series */
+	{ USB_DEVICE(0x0930, 0x0708) }, /* TOSHIBA Pocket PC e350 Series */
+	{ USB_DEVICE(0x0930, 0x0709) }, /* TOSHIBA Pocket PC e750 Series */
+	{ USB_DEVICE(0x0930, 0x070A) }, /* TOSHIBA Pocket PC e400 Series */
+	{ USB_DEVICE(0x0930, 0x070B) }, /* TOSHIBA Pocket PC e800 Series */
+	{ USB_DEVICE(0x094B, 0x0001) }, /* Linkup Systems USB Sync */
+	{ USB_DEVICE(0x0960, 0x0065) }, /* BCOM USB Sync 0065 */
+	{ USB_DEVICE(0x0960, 0x0066) }, /* BCOM USB Sync 0066 */
+	{ USB_DEVICE(0x0960, 0x0067) }, /* BCOM USB Sync 0067 */
+	{ USB_DEVICE(0x0961, 0x0010) }, /* Portatec USB Sync */
+	{ USB_DEVICE(0x099E, 0x0052) }, /* Trimble GeoExplorer */
+	{ USB_DEVICE(0x099E, 0x4000) }, /* TDS Data Collector */
+	{ USB_DEVICE(0x0B05, 0x4200) }, /* ASUS USB Sync */
+	{ USB_DEVICE(0x0B05, 0x4201) }, /* ASUS USB Sync */
+	{ USB_DEVICE(0x0B05, 0x4202) }, /* ASUS USB Sync */
+	{ USB_DEVICE(0x0B05, 0x420F) }, /* ASUS USB Sync */
+	{ USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */
+	{ USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x00CE) }, /* HTC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x00CF) }, /* HTC USB Modem */
+	{ USB_DEVICE(0x0BB4, 0x0A01) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A02) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A03) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A04) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A05) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A06) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A07) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A08) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A09) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A0A) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A0B) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A0C) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A0D) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A0E) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A0F) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A10) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A11) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A12) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A13) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A14) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A15) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A16) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A17) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A18) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A19) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A1A) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A1B) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A1C) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A1D) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A1E) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A1F) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A20) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A21) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A22) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A23) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A24) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A25) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A26) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A27) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A28) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A29) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A2A) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A2B) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A2C) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A2D) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A2E) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A2F) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A30) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A31) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A32) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A33) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A34) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A35) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A36) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A37) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A38) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A39) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A3A) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A3B) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A3C) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A3D) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A3E) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A3F) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A40) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A41) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A42) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A43) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A44) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A45) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A46) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A47) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A48) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A49) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A4A) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A4B) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A4C) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A4D) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A4E) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A4F) }, /* PocketPC USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A50) }, /* HTC SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A51) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A52) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A53) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A54) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A55) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A56) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A57) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A58) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A59) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A5A) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A5B) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A5C) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A5D) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A5E) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A5F) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A60) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A61) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A62) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A63) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A64) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A65) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A66) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A67) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A68) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A69) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A6A) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A6B) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A6C) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A6D) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A6E) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A6F) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A70) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A71) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A72) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A73) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A74) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A75) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A76) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A77) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A78) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A79) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A7A) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A7B) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A7C) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A7D) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A7E) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A7F) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A80) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A81) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A82) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A83) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A84) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A85) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A86) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A87) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A88) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A89) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A8A) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A8B) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A8C) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A8D) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A8E) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A8F) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A90) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A91) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A92) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A93) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A94) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A95) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A96) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A97) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A98) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A99) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A9A) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A9B) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A9C) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A9D) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A9E) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0A9F) }, /* SmartPhone USB Sync */
+	{ USB_DEVICE(0x0BB4, 0x0BCE) }, /* "High Tech Computer Corp" */
+	{ USB_DEVICE(0x0BF8, 0x1001) }, /* Fujitsu Siemens Computers USB Sync */
+	{ USB_DEVICE(0x0C44, 0x03A2) }, /* Motorola iDEN Smartphone */
+	{ USB_DEVICE(0x0C8E, 0x6000) }, /* Cesscom Luxian Series */
+	{ USB_DEVICE(0x0CAD, 0x9001) }, /* Motorola PowerPad Pocket PC Device */
+	{ USB_DEVICE(0x0F4E, 0x0200) }, /* Freedom Scientific USB Sync */
+	{ USB_DEVICE(0x0F98, 0x0201) }, /* Cyberbank USB Sync */
+	{ USB_DEVICE(0x0FB8, 0x3001) }, /* Wistron USB Sync */
+	{ USB_DEVICE(0x0FB8, 0x3002) }, /* Wistron USB Sync */
+	{ USB_DEVICE(0x0FB8, 0x3003) }, /* Wistron USB Sync */
+	{ USB_DEVICE(0x0FB8, 0x4001) }, /* Wistron USB Sync */
+	{ USB_DEVICE(0x1066, 0x00CE) }, /* E-TEN USB Sync */
+	{ USB_DEVICE(0x1066, 0x0300) }, /* E-TEN P3XX Pocket PC */
+	{ USB_DEVICE(0x1066, 0x0500) }, /* E-TEN P5XX Pocket PC */
+	{ USB_DEVICE(0x1066, 0x0600) }, /* E-TEN P6XX Pocket PC */
+	{ USB_DEVICE(0x1066, 0x0700) }, /* E-TEN P7XX Pocket PC */
+	{ USB_DEVICE(0x1114, 0x0001) }, /* Psion Teklogix Sync 753x */
+	{ USB_DEVICE(0x1114, 0x0004) }, /* Psion Teklogix Sync netBookPro */
+	{ USB_DEVICE(0x1114, 0x0006) }, /* Psion Teklogix Sync 7525 */
+	{ USB_DEVICE(0x1182, 0x1388) }, /* VES USB Sync */
+	{ USB_DEVICE(0x11D9, 0x1002) }, /* Rugged Pocket PC 2003 */
+	{ USB_DEVICE(0x11D9, 0x1003) }, /* Rugged Pocket PC 2003 */
+	{ USB_DEVICE(0x1231, 0xCE01) }, /* USB Sync 03 */
+	{ USB_DEVICE(0x1231, 0xCE02) }, /* USB Sync 03 */
+	{ USB_DEVICE(0x1690, 0x0601) }, /* Askey USB Sync */
+	{ USB_DEVICE(0x22B8, 0x4204) }, /* Motorola MPx200 Smartphone */
+	{ USB_DEVICE(0x22B8, 0x4214) }, /* Motorola MPc GSM */
+	{ USB_DEVICE(0x22B8, 0x4224) }, /* Motorola MPx220 Smartphone */
+	{ USB_DEVICE(0x22B8, 0x4234) }, /* Motorola MPc CDMA */
+	{ USB_DEVICE(0x22B8, 0x4244) }, /* Motorola MPx100 Smartphone */
+	{ USB_DEVICE(0x3340, 0x011C) }, /* Mio DigiWalker PPC StrongARM */
+	{ USB_DEVICE(0x3340, 0x0326) }, /* Mio DigiWalker 338 */
+	{ USB_DEVICE(0x3340, 0x0426) }, /* Mio DigiWalker 338 */
+	{ USB_DEVICE(0x3340, 0x043A) }, /* Mio DigiWalker USB Sync */
+	{ USB_DEVICE(0x3340, 0x051C) }, /* MiTAC USB Sync 528 */
+	{ USB_DEVICE(0x3340, 0x053A) }, /* Mio DigiWalker SmartPhone USB Sync */
+	{ USB_DEVICE(0x3340, 0x071C) }, /* MiTAC USB Sync */
+	{ USB_DEVICE(0x3340, 0x0B1C) }, /* Generic PPC StrongARM */
+	{ USB_DEVICE(0x3340, 0x0E3A) }, /* Generic PPC USB Sync */
+	{ USB_DEVICE(0x3340, 0x0F1C) }, /* Itautec USB Sync */
+	{ USB_DEVICE(0x3340, 0x0F3A) }, /* Generic SmartPhone USB Sync */
+	{ USB_DEVICE(0x3340, 0x1326) }, /* Itautec USB Sync */
+	{ USB_DEVICE(0x3340, 0x191C) }, /* YAKUMO USB Sync */
+	{ USB_DEVICE(0x3340, 0x2326) }, /* Vobis USB Sync */
+	{ USB_DEVICE(0x3340, 0x3326) }, /* MEDION Winodws Moble USB Sync */
+	{ USB_DEVICE(0x3708, 0x20CE) }, /* Legend USB Sync */
+	{ USB_DEVICE(0x3708, 0x21CE) }, /* Lenovo USB Sync */
+	{ USB_DEVICE(0x4113, 0x0210) }, /* Mobile Media Technology USB Sync */
+	{ USB_DEVICE(0x4113, 0x0211) }, /* Mobile Media Technology USB Sync */
+	{ USB_DEVICE(0x4113, 0x0400) }, /* Mobile Media Technology USB Sync */
+	{ USB_DEVICE(0x4113, 0x0410) }, /* Mobile Media Technology USB Sync */
+	{ USB_DEVICE(0x413C, 0x4001) }, /* Dell Axim USB Sync */
+	{ USB_DEVICE(0x413C, 0x4002) }, /* Dell Axim USB Sync */
+	{ USB_DEVICE(0x413C, 0x4003) }, /* Dell Axim USB Sync */
+	{ USB_DEVICE(0x413C, 0x4004) }, /* Dell Axim USB Sync */
+	{ USB_DEVICE(0x413C, 0x4005) }, /* Dell Axim USB Sync */
+	{ USB_DEVICE(0x413C, 0x4006) }, /* Dell Axim USB Sync */
+	{ USB_DEVICE(0x413C, 0x4007) }, /* Dell Axim USB Sync */
+	{ USB_DEVICE(0x413C, 0x4008) }, /* Dell Axim USB Sync */
+	{ USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */
+	{ USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */
+	{ USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */
+	{ }                             /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ipaq_id_table);
+
+
+/* All of the device info needed for the Compaq iPAQ */
+static struct usb_serial_driver ipaq_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"ipaq",
+	},
+	.description =		"PocketPC PDA",
+	.id_table =		ipaq_id_table,
+	.bulk_in_size =		256,
+	.bulk_out_size =	256,
+	.open =			ipaq_open,
+	.attach =		ipaq_startup,
+	.calc_num_ports =	ipaq_calc_num_ports,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ipaq_device, NULL
+};
+
+static int ipaq_open(struct tty_struct *tty,
+			struct usb_serial_port *port)
+{
+	struct usb_serial	*serial = port->serial;
+	int			result = 0;
+	int			retries = connect_retries;
+
+	msleep(1000*initial_wait);
+
+	/*
+	 * Send out control message observed in win98 sniffs. Not sure what
+	 * it does, but from empirical observations, it seems that the device
+	 * will start the chat sequence once one of these messages gets
+	 * through. Since this has a reasonably high failure rate, we retry
+	 * several times.
+	 */
+	while (retries) {
+		retries--;
+		result = usb_control_msg(serial->dev,
+				usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21,
+				0x1, 0, NULL, 0, 100);
+		if (!result)
+			break;
+
+		msleep(1000);
+	}
+	if (!retries && result) {
+		dev_err(&port->dev, "%s - failed doing control urb, error %d\n",
+							__func__, result);
+		return result;
+	}
+
+	return usb_serial_generic_open(tty, port);
+}
+
+static int ipaq_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds)
+{
+	/*
+	 * Some of the devices in ipaq_id_table[] are composite, and we
+	 * shouldn't bind to all the interfaces. This test will rule out
+	 * some obviously invalid possibilities.
+	 */
+	if (epds->num_bulk_in == 0 || epds->num_bulk_out == 0)
+		return -ENODEV;
+
+	/*
+	 * A few devices have four endpoints, seemingly Yakuma devices, and
+	 * we need the second pair.
+	 */
+	if (epds->num_bulk_in > 1 && epds->num_bulk_out > 1) {
+		epds->bulk_in[0] = epds->bulk_in[1];
+		epds->bulk_out[0] = epds->bulk_out[1];
+	}
+
+	/*
+	 * Other devices have 3 endpoints, but we only use the first bulk in
+	 * and out endpoints.
+	 */
+	epds->num_bulk_in = 1;
+	epds->num_bulk_out = 1;
+
+	return 1;
+}
+
+static int ipaq_startup(struct usb_serial *serial)
+{
+	if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
+		/*
+		 * FIXME: HP iPaq rx3715, possibly others, have 1 config that
+		 * is labeled as 2
+		 */
+
+		dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
+			serial->dev->actconfig->desc.bConfigurationValue);
+		return -ENODEV;
+	}
+
+	return usb_reset_configuration(serial->dev);
+}
+
+module_usb_serial_driver(serial_drivers, ipaq_id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(connect_retries, int, 0644);
+MODULE_PARM_DESC(connect_retries,
+		"Maximum number of connect retries (one second each)");
+
+module_param(initial_wait, int, 0644);
+MODULE_PARM_DESC(initial_wait,
+		"Time to wait before attempting a connection (in seconds)");
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
new file mode 100644
index 000000000..d04c7cc5c
--- /dev/null
+++ b/drivers/usb/serial/ipw.c
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * IPWireless 3G UMTS TDD Modem driver (USB connected)
+ *
+ *   Copyright (C) 2004 Roelf Diedericks <roelfd@inet.co.za>
+ *   Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
+ *
+ * All information about the device was acquired using SnoopyPro
+ * on MSFT's O/S, and examing the MSFT drivers' debug output
+ * (insanely left _on_ in the enduser version)
+ *
+ * It was written out of frustration with the IPWireless USB modem
+ * supplied by Axity3G/Sentech South Africa not supporting
+ * Linux whatsoever.
+ *
+ * Nobody provided any proprietary information that was not already
+ * available for this device.
+ *
+ * The modem adheres to the "3GPP TS  27.007 AT command set for 3G
+ * User Equipment (UE)" standard, available from
+ * http://www.3gpp.org/ftp/Specs/html-info/27007.htm
+ *
+ * The code was only tested the IPWireless handheld modem distributed
+ * in South Africa by Sentech.
+ *
+ * It may work for Woosh Inc in .nz too, as it appears they use the
+ * same kit.
+ *
+ * There is still some work to be done in terms of handling
+ * DCD, DTR, RTS, CTS which are currently faked.
+ * It's good enough for PPP at this point. It's based off all kinds of
+ * code found in usb/serial and usb/class
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+#include "usb-wwan.h"
+
+#define DRIVER_AUTHOR	"Roelf Diedericks"
+#define DRIVER_DESC	"IPWireless tty driver"
+
+#define IPW_TTY_MAJOR	240	/* real device node major id, experimental range */
+#define IPW_TTY_MINORS	256	/* we support 256 devices, dunno why, it'd be insane :) */
+
+#define USB_IPW_MAGIC	0x6d02	/* magic number for ipw struct */
+
+
+/* Message sizes */
+#define EVENT_BUFFER_SIZE	0xFF
+#define CHAR2INT16(c1, c0)	(((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
+
+/* vendor/product pairs that are known work with this driver*/
+#define IPW_VID		0x0bc3
+#define IPW_PID		0x0001
+
+
+/* Vendor commands: */
+
+/* baud rates */
+enum {
+	ipw_sio_b256000 = 0x000e,
+	ipw_sio_b128000 = 0x001d,
+	ipw_sio_b115200 = 0x0020,
+	ipw_sio_b57600  = 0x0040,
+	ipw_sio_b56000  = 0x0042,
+	ipw_sio_b38400  = 0x0060,
+	ipw_sio_b19200  = 0x00c0,
+	ipw_sio_b14400  = 0x0100,
+	ipw_sio_b9600   = 0x0180,
+	ipw_sio_b4800   = 0x0300,
+	ipw_sio_b2400   = 0x0600,
+	ipw_sio_b1200   = 0x0c00,
+	ipw_sio_b600    = 0x1800
+};
+
+/* data bits */
+#define ipw_dtb_7		0x700
+#define ipw_dtb_8		0x810	/* ok so the define is misleading, I know, but forces 8,n,1 */
+					/* I mean, is there a point to any other setting these days? :) */
+
+/* usb control request types : */
+#define IPW_SIO_RXCTL		0x00	/* control bulk rx channel transmissions, value=1/0 (on/off) */
+#define IPW_SIO_SET_BAUD	0x01	/* set baud, value=requested ipw_sio_bxxxx */
+#define IPW_SIO_SET_LINE	0x03	/* set databits, parity. value=ipw_dtb_x */
+#define IPW_SIO_SET_PIN		0x03	/* set/clear dtr/rts value=ipw_pin_xxx */
+#define IPW_SIO_POLL		0x08	/* get serial port status byte, call with value=0 */
+#define IPW_SIO_INIT		0x11	/* initializes ? value=0 (appears as first thing todo on open) */
+#define IPW_SIO_PURGE		0x12	/* purge all transmissions?, call with value=numchar_to_purge */
+#define IPW_SIO_HANDFLOW	0x13	/* set xon/xoff limits value=0, and a buffer of 0x10 bytes */
+#define IPW_SIO_SETCHARS	0x13	/* set the flowcontrol special chars, value=0, buf=6 bytes, */
+					/* last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13 */
+
+/* values used for request IPW_SIO_SET_PIN */
+#define IPW_PIN_SETDTR		0x101
+#define IPW_PIN_SETRTS		0x202
+#define IPW_PIN_CLRDTR		0x100
+#define IPW_PIN_CLRRTS		0x200 /* unconfirmed */
+
+/* values used for request IPW_SIO_RXCTL */
+#define IPW_RXBULK_ON		1
+#define IPW_RXBULK_OFF		0
+
+/* various 16 byte hardcoded transferbuffers used by flow control */
+#define IPW_BYTES_FLOWINIT	{ 0x01, 0, 0, 0, 0x40, 0, 0, 0, \
+					0, 0, 0, 0, 0, 0, 0, 0 }
+
+/* Interpretation of modem status lines */
+/* These need sorting out by individually connecting pins and checking
+ * results. FIXME!
+ * When data is being sent we see 0x30 in the lower byte; this must
+ * contain DSR and CTS ...
+ */
+#define IPW_DSR			((1<<4) | (1<<5))
+#define IPW_CTS			((1<<5) | (1<<4))
+
+#define IPW_WANTS_TO_SEND	0x30
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(IPW_VID, IPW_PID) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_device *udev = port->serial->dev;
+	struct device *dev = &port->dev;
+	u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT;
+	u8 *buf_flow_init;
+	int result;
+
+	buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL);
+	if (!buf_flow_init)
+		return -ENOMEM;
+
+	/* --1: Tell the modem to initialize (we think) From sniffs this is
+	 *	always the first thing that gets sent to the modem during
+	 *	opening of the device */
+	dev_dbg(dev, "%s: Sending SIO_INIT (we guess)\n", __func__);
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			 IPW_SIO_INIT,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 0,
+			 0, /* index */
+			 NULL,
+			 0,
+			 100000);
+	if (result < 0)
+		dev_err(dev, "Init of modem failed (error = %d)\n", result);
+
+	/* reset the bulk pipes */
+	usb_clear_halt(udev, usb_rcvbulkpipe(udev, port->bulk_in_endpointAddress));
+	usb_clear_halt(udev, usb_sndbulkpipe(udev, port->bulk_out_endpointAddress));
+
+	/*--2: Start reading from the device */
+	dev_dbg(dev, "%s: setting up bulk read callback\n", __func__);
+	usb_wwan_open(tty, port);
+
+	/*--3: Tell the modem to open the floodgates on the rx bulk channel */
+	dev_dbg(dev, "%s:asking modem for RxRead (RXBULK_ON)\n", __func__);
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			 IPW_SIO_RXCTL,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 IPW_RXBULK_ON,
+			 0, /* index */
+			 NULL,
+			 0,
+			 100000);
+	if (result < 0)
+		dev_err(dev, "Enabling bulk RxRead failed (error = %d)\n", result);
+
+	/*--4: setup the initial flowcontrol */
+	dev_dbg(dev, "%s:setting init flowcontrol (%s)\n", __func__, buf_flow_init);
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			 IPW_SIO_HANDFLOW,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 0,
+			 0,
+			 buf_flow_init,
+			 0x10,
+			 200000);
+	if (result < 0)
+		dev_err(dev, "initial flowcontrol failed (error = %d)\n", result);
+
+	kfree(buf_flow_init);
+	return 0;
+}
+
+static int ipw_attach(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *data;
+
+	data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spin_lock_init(&data->susp_lock);
+	usb_set_serial_data(serial, data);
+	return 0;
+}
+
+static void ipw_release(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *data = usb_get_serial_data(serial);
+
+	usb_set_serial_data(serial, NULL);
+	kfree(data);
+}
+
+static void ipw_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_device *udev = port->serial->dev;
+	struct device *dev = &port->dev;
+	int result;
+
+	dev_dbg(dev, "%s: on = %d\n", __func__, on);
+
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			 IPW_SIO_SET_PIN,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR,
+			 0,
+			 NULL,
+			 0,
+			 200000);
+	if (result < 0)
+		dev_err(dev, "setting dtr failed (error = %d)\n", result);
+
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			 IPW_SIO_SET_PIN, USB_TYPE_VENDOR |
+					USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS,
+			 0,
+			 NULL,
+			 0,
+			 200000);
+	if (result < 0)
+		dev_err(dev, "setting rts failed (error = %d)\n", result);
+}
+
+static void ipw_close(struct usb_serial_port *port)
+{
+	struct usb_device *udev = port->serial->dev;
+	struct device *dev = &port->dev;
+	int result;
+
+	/*--3: purge */
+	dev_dbg(dev, "%s:sending purge\n", __func__);
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			 IPW_SIO_PURGE, USB_TYPE_VENDOR |
+			 		USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 0x03,
+			 0,
+			 NULL,
+			 0,
+			 200000);
+	if (result < 0)
+		dev_err(dev, "purge failed (error = %d)\n", result);
+
+
+	/* send RXBULK_off (tell modem to stop transmitting bulk data on
+	   rx chan) */
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			 IPW_SIO_RXCTL,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 IPW_RXBULK_OFF,
+			 0, /* index */
+			 NULL,
+			 0,
+			 100000);
+
+	if (result < 0)
+		dev_err(dev, "Disabling bulk RxRead failed (error = %d)\n", result);
+
+	usb_wwan_close(port);
+}
+
+static struct usb_serial_driver ipw_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"ipw",
+	},
+	.description =		"IPWireless converter",
+	.id_table =		id_table,
+	.num_ports =		1,
+	.open =			ipw_open,
+	.close =		ipw_close,
+	.attach =		ipw_attach,
+	.release =		ipw_release,
+	.port_probe =		usb_wwan_port_probe,
+	.port_remove =		usb_wwan_port_remove,
+	.dtr_rts =		ipw_dtr_rts,
+	.write =		usb_wwan_write,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ipw_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+/* Module information */
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
new file mode 100644
index 000000000..82f108134
--- /dev/null
+++ b/drivers/usb/serial/ir-usb.c
@@ -0,0 +1,488 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * USB IR Dongle driver
+ *
+ *	Copyright (C) 2001-2002	Greg Kroah-Hartman (greg@kroah.com)
+ *	Copyright (C) 2002	Gary Brubaker (xavyer@ix.netcom.com)
+ *	Copyright (C) 2010	Johan Hovold (jhovold@gmail.com)
+ *
+ * This driver allows a USB IrDA device to be used as a "dumb" serial device.
+ * This can be useful if you do not have access to a full IrDA stack on the
+ * other side of the connection.  If you do have an IrDA stack on both devices,
+ * please use the usb-irda driver, as it contains the proper error checking and
+ * other goodness of a full IrDA stack.
+ *
+ * Portions of this driver were taken from drivers/net/irda/irda-usb.c, which
+ * was written by Roman Weissgaerber <weissg@vienna.at>, Dag Brattli
+ * <dag@brattli.net>, and Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/usb/irda.h>
+
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Johan Hovold <jhovold@gmail.com>"
+#define DRIVER_DESC "USB IR Dongle driver"
+
+/* if overridden by the user, then use their value for the size of the read and
+ * write urbs */
+static int buffer_size;
+
+/* if overridden by the user, then use the specified number of XBOFs */
+static int xbof = -1;
+
+static int  ir_startup (struct usb_serial *serial);
+static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+		const unsigned char *buf, int count);
+static unsigned int ir_write_room(struct tty_struct *tty);
+static void ir_write_bulk_callback(struct urb *urb);
+static void ir_process_read_urb(struct urb *urb);
+static void ir_set_termios(struct tty_struct *tty,
+			   struct usb_serial_port *port,
+			   const struct ktermios *old_termios);
+
+/* Not that this lot means you can only have one per system */
+static u8 ir_baud;
+static u8 ir_xbof;
+static u8 ir_add_bof;
+
+static const struct usb_device_id ir_id_table[] = {
+	{ USB_DEVICE(0x050f, 0x0180) },		/* KC Technology, KC-180 */
+	{ USB_DEVICE(0x08e9, 0x0100) },		/* XTNDAccess */
+	{ USB_DEVICE(0x09c4, 0x0011) },		/* ACTiSys ACT-IR2000U */
+	{ USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, USB_SUBCLASS_IRDA, 0) },
+	{ }					/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ir_id_table);
+
+static struct usb_serial_driver ir_device = {
+	.driver	= {
+		.owner	= THIS_MODULE,
+		.name	= "ir-usb",
+	},
+	.description		= "IR Dongle",
+	.id_table		= ir_id_table,
+	.num_ports		= 1,
+	.num_bulk_in		= 1,
+	.num_bulk_out		= 1,
+	.set_termios		= ir_set_termios,
+	.attach			= ir_startup,
+	.write			= ir_write,
+	.write_room		= ir_write_room,
+	.write_bulk_callback	= ir_write_bulk_callback,
+	.process_read_urb	= ir_process_read_urb,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ir_device, NULL
+};
+
+static inline void irda_usb_dump_class_desc(struct usb_serial *serial,
+					    struct usb_irda_cs_descriptor *desc)
+{
+	struct device *dev = &serial->dev->dev;
+
+	dev_dbg(dev, "bLength=%x\n", desc->bLength);
+	dev_dbg(dev, "bDescriptorType=%x\n", desc->bDescriptorType);
+	dev_dbg(dev, "bcdSpecRevision=%x\n", __le16_to_cpu(desc->bcdSpecRevision));
+	dev_dbg(dev, "bmDataSize=%x\n", desc->bmDataSize);
+	dev_dbg(dev, "bmWindowSize=%x\n", desc->bmWindowSize);
+	dev_dbg(dev, "bmMinTurnaroundTime=%d\n", desc->bmMinTurnaroundTime);
+	dev_dbg(dev, "wBaudRate=%x\n", __le16_to_cpu(desc->wBaudRate));
+	dev_dbg(dev, "bmAdditionalBOFs=%x\n", desc->bmAdditionalBOFs);
+	dev_dbg(dev, "bIrdaRateSniff=%x\n", desc->bIrdaRateSniff);
+	dev_dbg(dev, "bMaxUnicastList=%x\n", desc->bMaxUnicastList);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_usb_find_class_desc(dev, ifnum)
+ *
+ *    Returns instance of IrDA class descriptor, or NULL if not found
+ *
+ * The class descriptor is some extra info that IrDA USB devices will
+ * offer to us, describing their IrDA characteristics. We will use that in
+ * irda_usb_init_qos()
+ *
+ * Based on the same function in drivers/net/irda/irda-usb.c
+ */
+static struct usb_irda_cs_descriptor *
+irda_usb_find_class_desc(struct usb_serial *serial, unsigned int ifnum)
+{
+	struct usb_device *dev = serial->dev;
+	struct usb_irda_cs_descriptor *desc;
+	int ret;
+
+	desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+	if (!desc)
+		return NULL;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			USB_REQ_CS_IRDA_GET_CLASS_DESC,
+			USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			0, ifnum, desc, sizeof(*desc), 1000);
+
+	dev_dbg(&serial->dev->dev, "%s -  ret=%d\n", __func__, ret);
+	if (ret < (int)sizeof(*desc)) {
+		dev_dbg(&serial->dev->dev,
+			"%s - class descriptor read %s (%d)\n", __func__,
+			(ret < 0) ? "failed" : "too short", ret);
+		goto error;
+	}
+	if (desc->bDescriptorType != USB_DT_CS_IRDA) {
+		dev_dbg(&serial->dev->dev, "%s - bad class descriptor type\n",
+			__func__);
+		goto error;
+	}
+
+	irda_usb_dump_class_desc(serial, desc);
+	return desc;
+
+error:
+	kfree(desc);
+	return NULL;
+}
+
+static u8 ir_xbof_change(u8 xbof)
+{
+	u8 result;
+
+	/* reference irda-usb.c */
+	switch (xbof) {
+	case 48:
+		result = 0x10;
+		break;
+	case 28:
+	case 24:
+		result = 0x20;
+		break;
+	default:
+	case 12:
+		result = 0x30;
+		break;
+	case  5:
+	case  6:
+		result = 0x40;
+		break;
+	case  3:
+		result = 0x50;
+		break;
+	case  2:
+		result = 0x60;
+		break;
+	case  1:
+		result = 0x70;
+		break;
+	case  0:
+		result = 0x80;
+		break;
+	}
+
+	return(result);
+}
+
+static int ir_startup(struct usb_serial *serial)
+{
+	struct usb_irda_cs_descriptor *irda_desc;
+	int rates;
+
+	irda_desc = irda_usb_find_class_desc(serial, 0);
+	if (!irda_desc) {
+		dev_err(&serial->dev->dev,
+			"IRDA class descriptor not found, device not bound\n");
+		return -ENODEV;
+	}
+
+	rates = le16_to_cpu(irda_desc->wBaudRate);
+
+	dev_dbg(&serial->dev->dev,
+		"%s - Baud rates supported:%s%s%s%s%s%s%s%s%s\n",
+		__func__,
+		(rates & USB_IRDA_BR_2400) ? " 2400" : "",
+		(rates & USB_IRDA_BR_9600) ? " 9600" : "",
+		(rates & USB_IRDA_BR_19200) ? " 19200" : "",
+		(rates & USB_IRDA_BR_38400) ? " 38400" : "",
+		(rates & USB_IRDA_BR_57600) ? " 57600" : "",
+		(rates & USB_IRDA_BR_115200) ? " 115200" : "",
+		(rates & USB_IRDA_BR_576000) ? " 576000" : "",
+		(rates & USB_IRDA_BR_1152000) ? " 1152000" : "",
+		(rates & USB_IRDA_BR_4000000) ? " 4000000" : "");
+
+	switch (irda_desc->bmAdditionalBOFs) {
+	case USB_IRDA_AB_48:
+		ir_add_bof = 48;
+		break;
+	case USB_IRDA_AB_24:
+		ir_add_bof = 24;
+		break;
+	case USB_IRDA_AB_12:
+		ir_add_bof = 12;
+		break;
+	case USB_IRDA_AB_6:
+		ir_add_bof = 6;
+		break;
+	case USB_IRDA_AB_3:
+		ir_add_bof = 3;
+		break;
+	case USB_IRDA_AB_2:
+		ir_add_bof = 2;
+		break;
+	case USB_IRDA_AB_1:
+		ir_add_bof = 1;
+		break;
+	case USB_IRDA_AB_0:
+		ir_add_bof = 0;
+		break;
+	default:
+		break;
+	}
+
+	kfree(irda_desc);
+
+	return 0;
+}
+
+static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+		const unsigned char *buf, int count)
+{
+	struct urb *urb = NULL;
+	unsigned long flags;
+	int ret;
+
+	if (port->bulk_out_size == 0)
+		return -EINVAL;
+
+	if (count == 0)
+		return 0;
+
+	count = min(count, port->bulk_out_size - 1);
+
+	spin_lock_irqsave(&port->lock, flags);
+	if (__test_and_clear_bit(0, &port->write_urbs_free)) {
+		urb = port->write_urbs[0];
+		port->tx_bytes += count;
+	}
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (!urb)
+		return 0;
+
+	/*
+	 * The first byte of the packet we send to the device contains an
+	 * outbound header which indicates an additional number of BOFs and
+	 * a baud rate change.
+	 *
+	 * See section 5.4.2.2 of the USB IrDA spec.
+	 */
+	*(u8 *)urb->transfer_buffer = ir_xbof | ir_baud;
+
+	memcpy(urb->transfer_buffer + 1, buf, count);
+
+	urb->transfer_buffer_length = count + 1;
+	urb->transfer_flags = URB_ZERO_PACKET;
+
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	if (ret) {
+		dev_err(&port->dev, "failed to submit write urb: %d\n", ret);
+
+		spin_lock_irqsave(&port->lock, flags);
+		__set_bit(0, &port->write_urbs_free);
+		port->tx_bytes -= count;
+		spin_unlock_irqrestore(&port->lock, flags);
+
+		return ret;
+	}
+
+	return count;
+}
+
+static void ir_write_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	int status = urb->status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	__set_bit(0, &port->write_urbs_free);
+	port->tx_bytes -= urb->transfer_buffer_length - 1;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	switch (status) {
+	case 0:
+		break;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		dev_dbg(&port->dev, "write urb stopped: %d\n", status);
+		return;
+	case -EPIPE:
+		dev_err(&port->dev, "write urb stopped: %d\n", status);
+		return;
+	default:
+		dev_err(&port->dev, "nonzero write-urb status: %d\n", status);
+		break;
+	}
+
+	usb_serial_port_softint(port);
+}
+
+static unsigned int ir_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned int count = 0;
+
+	if (port->bulk_out_size == 0)
+		return 0;
+
+	if (test_bit(0, &port->write_urbs_free))
+		count = port->bulk_out_size - 1;
+
+	return count;
+}
+
+static void ir_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+
+	if (!urb->actual_length)
+		return;
+	/*
+	 * The first byte of the packet we get from the device
+	 * contains a busy indicator and baud rate change.
+	 * See section 5.4.1.2 of the USB IrDA spec.
+	 */
+	if (*data & 0x0f)
+		ir_baud = *data & 0x0f;
+
+	if (urb->actual_length == 1)
+		return;
+
+	tty_insert_flip_string(&port->port, data + 1, urb->actual_length - 1);
+	tty_flip_buffer_push(&port->port);
+}
+
+static void ir_set_termios(struct tty_struct *tty,
+			   struct usb_serial_port *port,
+			   const struct ktermios *old_termios)
+{
+	struct usb_device *udev = port->serial->dev;
+	unsigned char *transfer_buffer;
+	int actual_length;
+	speed_t baud;
+	int ir_baud;
+	int ret;
+
+	baud = tty_get_baud_rate(tty);
+
+	/*
+	 * FIXME, we should compare the baud request against the
+	 * capability stated in the IR header that we got in the
+	 * startup function.
+	 */
+
+	switch (baud) {
+	case 2400:
+		ir_baud = USB_IRDA_LS_2400;
+		break;
+	case 9600:
+		ir_baud = USB_IRDA_LS_9600;
+		break;
+	case 19200:
+		ir_baud = USB_IRDA_LS_19200;
+		break;
+	case 38400:
+		ir_baud = USB_IRDA_LS_38400;
+		break;
+	case 57600:
+		ir_baud = USB_IRDA_LS_57600;
+		break;
+	case 115200:
+		ir_baud = USB_IRDA_LS_115200;
+		break;
+	case 576000:
+		ir_baud = USB_IRDA_LS_576000;
+		break;
+	case 1152000:
+		ir_baud = USB_IRDA_LS_1152000;
+		break;
+	case 4000000:
+		ir_baud = USB_IRDA_LS_4000000;
+		break;
+	default:
+		ir_baud = USB_IRDA_LS_9600;
+		baud = 9600;
+	}
+
+	if (xbof == -1)
+		ir_xbof = ir_xbof_change(ir_add_bof);
+	else
+		ir_xbof = ir_xbof_change(xbof) ;
+
+	/* Only speed changes are supported */
+	tty_termios_copy_hw(&tty->termios, old_termios);
+	tty_encode_baud_rate(tty, baud, baud);
+
+	/*
+	 * send the baud change out on an "empty" data packet
+	 */
+	transfer_buffer = kmalloc(1, GFP_KERNEL);
+	if (!transfer_buffer)
+		return;
+
+	*transfer_buffer = ir_xbof | ir_baud;
+
+	ret = usb_bulk_msg(udev,
+			usb_sndbulkpipe(udev, port->bulk_out_endpointAddress),
+			transfer_buffer, 1, &actual_length, 5000);
+	if (ret || actual_length != 1) {
+		if (!ret)
+			ret = -EIO;
+		dev_err(&port->dev, "failed to change line speed: %d\n", ret);
+	}
+
+	kfree(transfer_buffer);
+}
+
+static int __init ir_init(void)
+{
+	if (buffer_size) {
+		ir_device.bulk_in_size = buffer_size;
+		ir_device.bulk_out_size = buffer_size;
+	}
+
+	return usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ir_id_table);
+}
+
+static void __exit ir_exit(void)
+{
+	usb_serial_deregister_drivers(serial_drivers);
+}
+
+
+module_init(ir_init);
+module_exit(ir_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(xbof, int, 0);
+MODULE_PARM_DESC(xbof, "Force specific number of XBOFs");
+module_param(buffer_size, int, 0);
+MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers");
+
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
new file mode 100644
index 000000000..77cba71bc
--- /dev/null
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -0,0 +1,1208 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Infinity Unlimited USB Phoenix driver
+ *
+ * Copyright (C) 2010 James Courtier-Dutton (James@superbug.co.uk)
+
+ * Copyright (C) 2007 Alain Degreffe (eczema@ecze.com)
+ *
+ * Original code taken from iuutool (Copyright (C) 2006 Juan Carlos Borrás)
+ *
+ *  And tested with help of WB Electronics
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include "iuu_phoenix.h"
+#include <linux/random.h>
+
+#define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
+
+static const struct usb_device_id id_table[] = {
+	{USB_DEVICE(IUU_USB_VENDOR_ID, IUU_USB_PRODUCT_ID)},
+	{}			/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* turbo parameter */
+static int boost = 100;
+static int clockmode = 1;
+static int cdmode = 1;
+static int iuu_cardin;
+static int iuu_cardout;
+static bool xmas;
+static int vcc_default = 5;
+
+static int iuu_create_sysfs_attrs(struct usb_serial_port *port);
+static int iuu_remove_sysfs_attrs(struct usb_serial_port *port);
+static void read_rxcmd_callback(struct urb *urb);
+
+struct iuu_private {
+	spinlock_t lock;	/* store irq state */
+	u8 line_status;
+	int tiostatus;		/* store IUART SIGNAL for tiocmget call */
+	u8 reset;		/* if 1 reset is needed */
+	int poll;		/* number of poll */
+	u8 *writebuf;		/* buffer for writing to device */
+	int writelen;		/* num of byte to write to device */
+	u8 *buf;		/* used for initialize speed */
+	u8 len;
+	int vcc;		/* vcc (either 3 or 5 V) */
+	u32 boost;
+	u32 clk;
+};
+
+static int iuu_port_probe(struct usb_serial_port *port)
+{
+	struct iuu_private *priv;
+	int ret;
+
+	priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->buf = kzalloc(256, GFP_KERNEL);
+	if (!priv->buf) {
+		kfree(priv);
+		return -ENOMEM;
+	}
+
+	priv->writebuf = kzalloc(256, GFP_KERNEL);
+	if (!priv->writebuf) {
+		kfree(priv->buf);
+		kfree(priv);
+		return -ENOMEM;
+	}
+
+	priv->vcc = vcc_default;
+	spin_lock_init(&priv->lock);
+
+	usb_set_serial_port_data(port, priv);
+
+	ret = iuu_create_sysfs_attrs(port);
+	if (ret) {
+		kfree(priv->writebuf);
+		kfree(priv->buf);
+		kfree(priv);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void iuu_port_remove(struct usb_serial_port *port)
+{
+	struct iuu_private *priv = usb_get_serial_port_data(port);
+
+	iuu_remove_sysfs_attrs(port);
+	kfree(priv->writebuf);
+	kfree(priv->buf);
+	kfree(priv);
+}
+
+static int iuu_tiocmset(struct tty_struct *tty,
+			unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct iuu_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	/* FIXME: locking on tiomstatus */
+	dev_dbg(&port->dev, "%s msg : SET = 0x%04x, CLEAR = 0x%04x\n",
+		__func__, set, clear);
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	if ((set & TIOCM_RTS) && !(priv->tiostatus == TIOCM_RTS)) {
+		dev_dbg(&port->dev, "%s TIOCMSET RESET called !!!\n", __func__);
+		priv->reset = 1;
+	}
+	if (set & TIOCM_RTS)
+		priv->tiostatus = TIOCM_RTS;
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return 0;
+}
+
+/* This is used to provide a carrier detect mechanism
+ * When a card is present, the response is 0x00
+ * When no card , the reader respond with TIOCM_CD
+ * This is known as CD autodetect mechanism
+ */
+static int iuu_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct iuu_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	rc = priv->tiostatus;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return rc;
+}
+
+static void iuu_rxcmd(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	int status = urb->status;
+
+	if (status) {
+		dev_dbg(&port->dev, "%s - status = %d\n", __func__, status);
+		/* error stop all */
+		return;
+	}
+
+
+	memset(port->write_urb->transfer_buffer, IUU_UART_RX, 1);
+	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
+			  usb_sndbulkpipe(port->serial->dev,
+					  port->bulk_out_endpointAddress),
+			  port->write_urb->transfer_buffer, 1,
+			  read_rxcmd_callback, port);
+	usb_submit_urb(port->write_urb, GFP_ATOMIC);
+}
+
+static int iuu_reset(struct usb_serial_port *port, u8 wt)
+{
+	struct iuu_private *priv = usb_get_serial_port_data(port);
+	int result;
+	char *buf_ptr = port->write_urb->transfer_buffer;
+
+	/* Prepare the reset sequence */
+
+	*buf_ptr++ = IUU_RST_SET;
+	*buf_ptr++ = IUU_DELAY_MS;
+	*buf_ptr++ = wt;
+	*buf_ptr = IUU_RST_CLEAR;
+
+	/* send the sequence */
+
+	usb_fill_bulk_urb(port->write_urb,
+			  port->serial->dev,
+			  usb_sndbulkpipe(port->serial->dev,
+					  port->bulk_out_endpointAddress),
+			  port->write_urb->transfer_buffer, 4, iuu_rxcmd, port);
+	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+	priv->reset = 0;
+	return result;
+}
+
+/* Status Function
+ * Return value is
+ * 0x00 = no card
+ * 0x01 = smartcard
+ * 0x02 = sim card
+ */
+static void iuu_update_status_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct iuu_private *priv = usb_get_serial_port_data(port);
+	u8 *st;
+	int status = urb->status;
+
+	if (status) {
+		dev_dbg(&port->dev, "%s - status = %d\n", __func__, status);
+		/* error stop all */
+		return;
+	}
+
+	st = urb->transfer_buffer;
+	dev_dbg(&port->dev, "%s - enter\n", __func__);
+	if (urb->actual_length == 1) {
+		switch (st[0]) {
+		case 0x1:
+			priv->tiostatus = iuu_cardout;
+			break;
+		case 0x0:
+			priv->tiostatus = iuu_cardin;
+			break;
+		default:
+			priv->tiostatus = iuu_cardin;
+		}
+	}
+	iuu_rxcmd(urb);
+}
+
+static void iuu_status_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	int status = urb->status;
+
+	dev_dbg(&port->dev, "%s - status = %d\n", __func__, status);
+	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
+			  usb_rcvbulkpipe(port->serial->dev,
+					  port->bulk_in_endpointAddress),
+			  port->read_urb->transfer_buffer, 256,
+			  iuu_update_status_callback, port);
+	usb_submit_urb(port->read_urb, GFP_ATOMIC);
+}
+
+static int iuu_status(struct usb_serial_port *port)
+{
+	int result;
+
+	memset(port->write_urb->transfer_buffer, IUU_GET_STATE_REGISTER, 1);
+	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
+			  usb_sndbulkpipe(port->serial->dev,
+					  port->bulk_out_endpointAddress),
+			  port->write_urb->transfer_buffer, 1,
+			  iuu_status_callback, port);
+	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+	return result;
+
+}
+
+static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
+{
+	int status;
+	struct usb_serial *serial = port->serial;
+	int actual = 0;
+
+	/* send the data out the bulk port */
+
+	status =
+	    usb_bulk_msg(serial->dev,
+			 usb_sndbulkpipe(serial->dev,
+					 port->bulk_out_endpointAddress), buf,
+			 count, &actual, 1000);
+
+	if (status != IUU_OPERATION_OK)
+		dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status);
+	else
+		dev_dbg(&port->dev, "%s - write OK !\n", __func__);
+	return status;
+}
+
+static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
+{
+	int status;
+	struct usb_serial *serial = port->serial;
+	int actual = 0;
+
+	/* send the data out the bulk port */
+	status =
+	    usb_bulk_msg(serial->dev,
+			 usb_rcvbulkpipe(serial->dev,
+					 port->bulk_in_endpointAddress), buf,
+			 count, &actual, 1000);
+
+	if (status != IUU_OPERATION_OK)
+		dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status);
+	else
+		dev_dbg(&port->dev, "%s - read OK !\n", __func__);
+	return status;
+}
+
+static int iuu_led(struct usb_serial_port *port, unsigned int R,
+		   unsigned int G, unsigned int B, u8 f)
+{
+	int status;
+	u8 *buf;
+	buf = kmalloc(8, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	buf[0] = IUU_SET_LED;
+	buf[1] = R & 0xFF;
+	buf[2] = (R >> 8) & 0xFF;
+	buf[3] = G & 0xFF;
+	buf[4] = (G >> 8) & 0xFF;
+	buf[5] = B & 0xFF;
+	buf[6] = (B >> 8) & 0xFF;
+	buf[7] = f;
+	status = bulk_immediate(port, buf, 8);
+	kfree(buf);
+	if (status != IUU_OPERATION_OK)
+		dev_dbg(&port->dev, "%s - led error status = %2x\n", __func__, status);
+	else
+		dev_dbg(&port->dev, "%s - led OK !\n", __func__);
+	return IUU_OPERATION_OK;
+}
+
+static void iuu_rgbf_fill_buffer(u8 *buf, u8 r1, u8 r2, u8 g1, u8 g2, u8 b1,
+				 u8 b2, u8 freq)
+{
+	*buf++ = IUU_SET_LED;
+	*buf++ = r1;
+	*buf++ = r2;
+	*buf++ = g1;
+	*buf++ = g2;
+	*buf++ = b1;
+	*buf++ = b2;
+	*buf = freq;
+}
+
+static void iuu_led_activity_on(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	char *buf_ptr = port->write_urb->transfer_buffer;
+
+	if (xmas) {
+		buf_ptr[0] = IUU_SET_LED;
+		get_random_bytes(buf_ptr + 1, 6);
+		buf_ptr[7] = 1;
+	} else {
+		iuu_rgbf_fill_buffer(buf_ptr, 255, 255, 0, 0, 0, 0, 255);
+	}
+
+	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
+			  usb_sndbulkpipe(port->serial->dev,
+					  port->bulk_out_endpointAddress),
+			  port->write_urb->transfer_buffer, 8 ,
+			  iuu_rxcmd, port);
+	usb_submit_urb(port->write_urb, GFP_ATOMIC);
+}
+
+static void iuu_led_activity_off(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	char *buf_ptr = port->write_urb->transfer_buffer;
+
+	if (xmas) {
+		iuu_rxcmd(urb);
+		return;
+	}
+
+	iuu_rgbf_fill_buffer(buf_ptr, 0, 0, 255, 255, 0, 0, 255);
+
+	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
+			  usb_sndbulkpipe(port->serial->dev,
+					  port->bulk_out_endpointAddress),
+			  port->write_urb->transfer_buffer, 8 ,
+			  iuu_rxcmd, port);
+	usb_submit_urb(port->write_urb, GFP_ATOMIC);
+}
+
+
+
+static int iuu_clk(struct usb_serial_port *port, int dwFrq)
+{
+	int status;
+	struct iuu_private *priv = usb_get_serial_port_data(port);
+	int Count = 0;
+	u8 FrqGenAdr = 0x69;
+	u8 DIV = 0;		/* 8bit */
+	u8 XDRV = 0;		/* 8bit */
+	u8 PUMP = 0;		/* 3bit */
+	u8 PBmsb = 0;		/* 2bit */
+	u8 PBlsb = 0;		/* 8bit */
+	u8 PO = 0;		/* 1bit */
+	u8 Q = 0;		/* 7bit */
+	/* 24bit = 3bytes */
+	unsigned int P = 0;
+	unsigned int P2 = 0;
+	int frq = (int)dwFrq;
+
+	if (frq == 0) {
+		priv->buf[Count++] = IUU_UART_WRITE_I2C;
+		priv->buf[Count++] = FrqGenAdr << 1;
+		priv->buf[Count++] = 0x09;
+		priv->buf[Count++] = 0x00;
+
+		status = bulk_immediate(port, (u8 *) priv->buf, Count);
+		if (status != 0) {
+			dev_dbg(&port->dev, "%s - write error\n", __func__);
+			return status;
+		}
+	} else if (frq == 3579000) {
+		DIV = 100;
+		P = 1193;
+		Q = 40;
+		XDRV = 0;
+	} else if (frq == 3680000) {
+		DIV = 105;
+		P = 161;
+		Q = 5;
+		XDRV = 0;
+	} else if (frq == 6000000) {
+		DIV = 66;
+		P = 66;
+		Q = 2;
+		XDRV = 0x28;
+	} else {
+		unsigned int result = 0;
+		unsigned int tmp = 0;
+		unsigned int check;
+		unsigned int check2;
+		char found = 0x00;
+		unsigned int lQ = 2;
+		unsigned int lP = 2055;
+		unsigned int lDiv = 4;
+
+		for (lQ = 2; lQ <= 47 && !found; lQ++)
+			for (lP = 2055; lP >= 8 && !found; lP--)
+				for (lDiv = 4; lDiv <= 127 && !found; lDiv++) {
+					tmp = (12000000 / lDiv) * (lP / lQ);
+					if (abs((int)(tmp - frq)) <
+					    abs((int)(frq - result))) {
+						check2 = (12000000 / lQ);
+						if (check2 < 250000)
+							continue;
+						check = (12000000 / lQ) * lP;
+						if (check > 400000000)
+							continue;
+						if (check < 100000000)
+							continue;
+						if (lDiv < 4 || lDiv > 127)
+							continue;
+						result = tmp;
+						P = lP;
+						DIV = lDiv;
+						Q = lQ;
+						if (result == frq)
+							found = 0x01;
+					}
+				}
+	}
+	P2 = ((P - PO) / 2) - 4;
+	PUMP = 0x04;
+	PBmsb = (P2 >> 8 & 0x03);
+	PBlsb = P2 & 0xFF;
+	PO = (P >> 10) & 0x01;
+	Q = Q - 2;
+
+	priv->buf[Count++] = IUU_UART_WRITE_I2C;	/* 0x4C */
+	priv->buf[Count++] = FrqGenAdr << 1;
+	priv->buf[Count++] = 0x09;
+	priv->buf[Count++] = 0x20;	/* Adr = 0x09 */
+	priv->buf[Count++] = IUU_UART_WRITE_I2C;	/* 0x4C */
+	priv->buf[Count++] = FrqGenAdr << 1;
+	priv->buf[Count++] = 0x0C;
+	priv->buf[Count++] = DIV;	/* Adr = 0x0C */
+	priv->buf[Count++] = IUU_UART_WRITE_I2C;	/* 0x4C */
+	priv->buf[Count++] = FrqGenAdr << 1;
+	priv->buf[Count++] = 0x12;
+	priv->buf[Count++] = XDRV;	/* Adr = 0x12 */
+	priv->buf[Count++] = IUU_UART_WRITE_I2C;	/*  0x4C */
+	priv->buf[Count++] = FrqGenAdr << 1;
+	priv->buf[Count++] = 0x13;
+	priv->buf[Count++] = 0x6B;	/* Adr = 0x13 */
+	priv->buf[Count++] = IUU_UART_WRITE_I2C;	/*  0x4C */
+	priv->buf[Count++] = FrqGenAdr << 1;
+	priv->buf[Count++] = 0x40;
+	priv->buf[Count++] = (0xC0 | ((PUMP & 0x07) << 2)) |
+			     (PBmsb & 0x03);	/* Adr = 0x40 */
+	priv->buf[Count++] = IUU_UART_WRITE_I2C;	/*  0x4C */
+	priv->buf[Count++] = FrqGenAdr << 1;
+	priv->buf[Count++] = 0x41;
+	priv->buf[Count++] = PBlsb;	/* Adr = 0x41 */
+	priv->buf[Count++] = IUU_UART_WRITE_I2C;	/*  0x4C */
+	priv->buf[Count++] = FrqGenAdr << 1;
+	priv->buf[Count++] = 0x42;
+	priv->buf[Count++] = Q | (((PO & 0x01) << 7));	/* Adr = 0x42 */
+	priv->buf[Count++] = IUU_UART_WRITE_I2C;	/*  0x4C */
+	priv->buf[Count++] = FrqGenAdr << 1;
+	priv->buf[Count++] = 0x44;
+	priv->buf[Count++] = (char)0xFF;	/* Adr = 0x44 */
+	priv->buf[Count++] = IUU_UART_WRITE_I2C;	/*  0x4C */
+	priv->buf[Count++] = FrqGenAdr << 1;
+	priv->buf[Count++] = 0x45;
+	priv->buf[Count++] = (char)0xFE;	/* Adr = 0x45 */
+	priv->buf[Count++] = IUU_UART_WRITE_I2C;	/*  0x4C */
+	priv->buf[Count++] = FrqGenAdr << 1;
+	priv->buf[Count++] = 0x46;
+	priv->buf[Count++] = 0x7F;	/* Adr = 0x46 */
+	priv->buf[Count++] = IUU_UART_WRITE_I2C;	/*  0x4C */
+	priv->buf[Count++] = FrqGenAdr << 1;
+	priv->buf[Count++] = 0x47;
+	priv->buf[Count++] = (char)0x84;	/* Adr = 0x47 */
+
+	status = bulk_immediate(port, (u8 *) priv->buf, Count);
+	if (status != IUU_OPERATION_OK)
+		dev_dbg(&port->dev, "%s - write error\n", __func__);
+	return status;
+}
+
+static int iuu_uart_flush(struct usb_serial_port *port)
+{
+	struct device *dev = &port->dev;
+	int i;
+	int status;
+	u8 *rxcmd;
+	struct iuu_private *priv = usb_get_serial_port_data(port);
+
+	if (iuu_led(port, 0xF000, 0, 0, 0xFF) < 0)
+		return -EIO;
+
+	rxcmd = kmalloc(1, GFP_KERNEL);
+	if (!rxcmd)
+		return -ENOMEM;
+
+	rxcmd[0] = IUU_UART_RX;
+
+	for (i = 0; i < 2; i++) {
+		status = bulk_immediate(port, rxcmd, 1);
+		if (status != IUU_OPERATION_OK) {
+			dev_dbg(dev, "%s - uart_flush_write error\n", __func__);
+			goto out_free;
+		}
+
+		status = read_immediate(port, &priv->len, 1);
+		if (status != IUU_OPERATION_OK) {
+			dev_dbg(dev, "%s - uart_flush_read error\n", __func__);
+			goto out_free;
+		}
+
+		if (priv->len > 0) {
+			dev_dbg(dev, "%s - uart_flush datalen is : %i\n", __func__, priv->len);
+			status = read_immediate(port, priv->buf, priv->len);
+			if (status != IUU_OPERATION_OK) {
+				dev_dbg(dev, "%s - uart_flush_read error\n", __func__);
+				goto out_free;
+			}
+		}
+	}
+	dev_dbg(dev, "%s - uart_flush_read OK!\n", __func__);
+	iuu_led(port, 0, 0xF000, 0, 0xFF);
+
+out_free:
+	kfree(rxcmd);
+
+	return status;
+}
+
+static void read_buf_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	int status = urb->status;
+
+	if (status) {
+		if (status == -EPROTO) {
+			/* reschedule needed */
+		}
+		return;
+	}
+
+	dev_dbg(&port->dev, "%s - %i chars to write\n", __func__, urb->actual_length);
+
+	if (urb->actual_length) {
+		tty_insert_flip_string(&port->port, data, urb->actual_length);
+		tty_flip_buffer_push(&port->port);
+	}
+	iuu_led_activity_on(urb);
+}
+
+static int iuu_bulk_write(struct usb_serial_port *port)
+{
+	struct iuu_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	int result;
+	int buf_len;
+	char *buf_ptr = port->write_urb->transfer_buffer;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	*buf_ptr++ = IUU_UART_ESC;
+	*buf_ptr++ = IUU_UART_TX;
+	*buf_ptr++ = priv->writelen;
+
+	memcpy(buf_ptr, priv->writebuf, priv->writelen);
+	buf_len = priv->writelen;
+	priv->writelen = 0;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	dev_dbg(&port->dev, "%s - writing %i chars : %*ph\n", __func__,
+		buf_len, buf_len, buf_ptr);
+	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
+			  usb_sndbulkpipe(port->serial->dev,
+					  port->bulk_out_endpointAddress),
+			  port->write_urb->transfer_buffer, buf_len + 3,
+			  iuu_rxcmd, port);
+	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+	usb_serial_port_softint(port);
+	return result;
+}
+
+static int iuu_read_buf(struct usb_serial_port *port, int len)
+{
+	int result;
+
+	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
+			  usb_rcvbulkpipe(port->serial->dev,
+					  port->bulk_in_endpointAddress),
+			  port->read_urb->transfer_buffer, len,
+			  read_buf_callback, port);
+	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+	return result;
+}
+
+static void iuu_uart_read_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct iuu_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	int status = urb->status;
+	int len = 0;
+	unsigned char *data = urb->transfer_buffer;
+	priv->poll++;
+
+	if (status) {
+		dev_dbg(&port->dev, "%s - status = %d\n", __func__, status);
+		/* error stop all */
+		return;
+	}
+
+	if (urb->actual_length == 1)
+		len = (int) data[0];
+
+	if (urb->actual_length > 1) {
+		dev_dbg(&port->dev, "%s - urb->actual_length = %i\n", __func__,
+		    urb->actual_length);
+		return;
+	}
+	/* if len > 0 call readbuf */
+
+	if (len > 0) {
+		dev_dbg(&port->dev, "%s - call read buf - len to read is %i\n",
+			__func__, len);
+		status = iuu_read_buf(port, len);
+		return;
+	}
+	/* need to update status  ? */
+	if (priv->poll > 99) {
+		status = iuu_status(port);
+		priv->poll = 0;
+		return;
+	}
+
+	/* reset waiting ? */
+
+	if (priv->reset == 1) {
+		status = iuu_reset(port, 0xC);
+		return;
+	}
+	/* Writebuf is waiting */
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->writelen > 0) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		status = iuu_bulk_write(port);
+		return;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+	/* if nothing to write call again rxcmd */
+	dev_dbg(&port->dev, "%s - rxcmd recall\n", __func__);
+	iuu_led_activity_off(urb);
+}
+
+static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port,
+			  const u8 *buf, int count)
+{
+	struct iuu_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	count = min(count, 256 - priv->writelen);
+	if (count == 0)
+		goto out;
+
+	/* fill the buffer */
+	memcpy(priv->writebuf + priv->writelen, buf, count);
+	priv->writelen += count;
+out:
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return count;
+}
+
+static void read_rxcmd_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	int result;
+	int status = urb->status;
+
+	if (status) {
+		/* error stop all */
+		return;
+	}
+
+	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
+			  usb_rcvbulkpipe(port->serial->dev,
+					  port->bulk_in_endpointAddress),
+			  port->read_urb->transfer_buffer, 256,
+			  iuu_uart_read_callback, port);
+	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+	dev_dbg(&port->dev, "%s - submit result = %d\n", __func__, result);
+}
+
+static int iuu_uart_on(struct usb_serial_port *port)
+{
+	int status;
+	u8 *buf;
+
+	buf = kmalloc(4, GFP_KERNEL);
+
+	if (!buf)
+		return -ENOMEM;
+
+	buf[0] = IUU_UART_ENABLE;
+	buf[1] = (u8) ((IUU_BAUD_9600 >> 8) & 0x00FF);
+	buf[2] = (u8) (0x00FF & IUU_BAUD_9600);
+	buf[3] = (u8) (0x0F0 & IUU_ONE_STOP_BIT) | (0x07 & IUU_PARITY_EVEN);
+
+	status = bulk_immediate(port, buf, 4);
+	if (status != IUU_OPERATION_OK) {
+		dev_dbg(&port->dev, "%s - uart_on error\n", __func__);
+		goto uart_enable_failed;
+	}
+	/*  iuu_reset() the card after iuu_uart_on() */
+	status = iuu_uart_flush(port);
+	if (status != IUU_OPERATION_OK)
+		dev_dbg(&port->dev, "%s - uart_flush error\n", __func__);
+uart_enable_failed:
+	kfree(buf);
+	return status;
+}
+
+/*  Disables the IUU UART (a.k.a. the Phoenix voiderface) */
+static int iuu_uart_off(struct usb_serial_port *port)
+{
+	int status;
+	u8 *buf;
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	buf[0] = IUU_UART_DISABLE;
+
+	status = bulk_immediate(port, buf, 1);
+	if (status != IUU_OPERATION_OK)
+		dev_dbg(&port->dev, "%s - uart_off error\n", __func__);
+
+	kfree(buf);
+	return status;
+}
+
+static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base,
+			 u32 *actual, u8 parity)
+{
+	int status;
+	u32 baud;
+	u8 *dataout;
+	u8 DataCount = 0;
+	u8 T1Frekvens = 0;
+	u8 T1reload = 0;
+	unsigned int T1FrekvensHZ = 0;
+
+	dev_dbg(&port->dev, "%s - enter baud_base=%d\n", __func__, baud_base);
+	dataout = kmalloc(5, GFP_KERNEL);
+
+	if (!dataout)
+		return -ENOMEM;
+	/*baud = (((priv->clk / 35) * baud_base) / 100000); */
+	baud = baud_base;
+
+	if (baud < 1200 || baud > 230400) {
+		kfree(dataout);
+		return IUU_INVALID_PARAMETER;
+	}
+	if (baud > 977) {
+		T1Frekvens = 3;
+		T1FrekvensHZ = 500000;
+	}
+
+	if (baud > 3906) {
+		T1Frekvens = 2;
+		T1FrekvensHZ = 2000000;
+	}
+
+	if (baud > 11718) {
+		T1Frekvens = 1;
+		T1FrekvensHZ = 6000000;
+	}
+
+	if (baud > 46875) {
+		T1Frekvens = 0;
+		T1FrekvensHZ = 24000000;
+	}
+
+	T1reload = 256 - (u8) (T1FrekvensHZ / (baud * 2));
+
+	/*  magic number here:  ENTER_FIRMWARE_UPDATE; */
+	dataout[DataCount++] = IUU_UART_ESC;
+	/*  magic number here:  CHANGE_BAUD; */
+	dataout[DataCount++] = IUU_UART_CHANGE;
+	dataout[DataCount++] = T1Frekvens;
+	dataout[DataCount++] = T1reload;
+
+	*actual = (T1FrekvensHZ / (256 - T1reload)) / 2;
+
+	switch (parity & 0x0F) {
+	case IUU_PARITY_NONE:
+		dataout[DataCount++] = 0x00;
+		break;
+	case IUU_PARITY_EVEN:
+		dataout[DataCount++] = 0x01;
+		break;
+	case IUU_PARITY_ODD:
+		dataout[DataCount++] = 0x02;
+		break;
+	case IUU_PARITY_MARK:
+		dataout[DataCount++] = 0x03;
+		break;
+	case IUU_PARITY_SPACE:
+		dataout[DataCount++] = 0x04;
+		break;
+	default:
+		kfree(dataout);
+		return IUU_INVALID_PARAMETER;
+	}
+
+	switch (parity & 0xF0) {
+	case IUU_ONE_STOP_BIT:
+		dataout[DataCount - 1] |= IUU_ONE_STOP_BIT;
+		break;
+
+	case IUU_TWO_STOP_BITS:
+		dataout[DataCount - 1] |= IUU_TWO_STOP_BITS;
+		break;
+	default:
+		kfree(dataout);
+		return IUU_INVALID_PARAMETER;
+	}
+
+	status = bulk_immediate(port, dataout, DataCount);
+	if (status != IUU_OPERATION_OK)
+		dev_dbg(&port->dev, "%s - uart_off error\n", __func__);
+	kfree(dataout);
+	return status;
+}
+
+static void iuu_set_termios(struct tty_struct *tty,
+			    struct usb_serial_port *port,
+			    const struct ktermios *old_termios)
+{
+	const u32 supported_mask = CMSPAR|PARENB|PARODD;
+	struct iuu_private *priv = usb_get_serial_port_data(port);
+	unsigned int cflag = tty->termios.c_cflag;
+	int status;
+	u32 actual;
+	u32 parity;
+	int csize = CS7;
+	int baud;
+	u32 newval = cflag & supported_mask;
+
+	/* Just use the ospeed. ispeed should be the same. */
+	baud = tty->termios.c_ospeed;
+
+	dev_dbg(&port->dev, "%s - enter c_ospeed or baud=%d\n", __func__, baud);
+
+	/* compute the parity parameter */
+	parity = 0;
+	if (cflag & CMSPAR) {	/* Using mark space */
+		if (cflag & PARODD)
+			parity |= IUU_PARITY_SPACE;
+		else
+			parity |= IUU_PARITY_MARK;
+	} else if (!(cflag & PARENB)) {
+		parity |= IUU_PARITY_NONE;
+		csize = CS8;
+	} else if (cflag & PARODD)
+		parity |= IUU_PARITY_ODD;
+	else
+		parity |= IUU_PARITY_EVEN;
+
+	parity |= (cflag & CSTOPB ? IUU_TWO_STOP_BITS : IUU_ONE_STOP_BIT);
+
+	/* set it */
+	status = iuu_uart_baud(port,
+			baud * priv->boost / 100,
+			&actual, parity);
+
+	/* set the termios value to the real one, so the user now what has
+	 * changed. We support few fields so its easies to copy the old hw
+	 * settings back over and then adjust them
+	 */
+	if (old_termios)
+		tty_termios_copy_hw(&tty->termios, old_termios);
+	if (status != 0)	/* Set failed - return old bits */
+		return;
+	/* Re-encode speed, parity and csize */
+	tty_encode_baud_rate(tty, baud, baud);
+	tty->termios.c_cflag &= ~(supported_mask|CSIZE);
+	tty->termios.c_cflag |= newval | csize;
+}
+
+static void iuu_close(struct usb_serial_port *port)
+{
+	/* iuu_led (port,255,0,0,0); */
+
+	iuu_uart_off(port);
+
+	usb_kill_urb(port->write_urb);
+	usb_kill_urb(port->read_urb);
+
+	iuu_led(port, 0, 0, 0xF000, 0xFF);
+}
+
+static void iuu_init_termios(struct tty_struct *tty)
+{
+	tty->termios.c_cflag = B9600 | CS8 | CSTOPB | CREAD | PARENB | CLOCAL;
+	tty->termios.c_ispeed = 9600;
+	tty->termios.c_ospeed = 9600;
+	tty->termios.c_lflag = 0;
+	tty->termios.c_oflag = 0;
+	tty->termios.c_iflag = 0;
+}
+
+static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct device *dev = &port->dev;
+	int result;
+	int baud;
+	u32 actual;
+	struct iuu_private *priv = usb_get_serial_port_data(port);
+
+	baud = tty->termios.c_ospeed;
+
+	dev_dbg(dev, "%s - baud %d\n", __func__, baud);
+	usb_clear_halt(serial->dev, port->write_urb->pipe);
+	usb_clear_halt(serial->dev, port->read_urb->pipe);
+
+	priv->poll = 0;
+
+#define SOUP(a, b, c, d)  do { \
+	result = usb_control_msg(port->serial->dev,	\
+				usb_sndctrlpipe(port->serial->dev, 0),	\
+				b, a, c, d, NULL, 0, 1000); \
+	dev_dbg(dev, "0x%x:0x%x:0x%x:0x%x  %d\n", a, b, c, d, result); } while (0)
+
+	/*  This is not UART related but IUU USB driver related or something */
+	/*  like that. Basically no IUU will accept any commands from the USB */
+	/*  host unless it has received the following message */
+	/* sprintf(buf ,"%c%c%c%c",0x03,0x02,0x02,0x0); */
+
+	SOUP(0x03, 0x02, 0x02, 0x0);
+
+	iuu_led(port, 0xF000, 0xF000, 0, 0xFF);
+	iuu_uart_on(port);
+	if (boost < 100)
+		boost = 100;
+	priv->boost = boost;
+	switch (clockmode) {
+	case 2:		/*  3.680 Mhz */
+		priv->clk = IUU_CLK_3680000;
+		iuu_clk(port, IUU_CLK_3680000 * boost / 100);
+		result =
+		    iuu_uart_baud(port, baud * boost / 100, &actual,
+				  IUU_PARITY_EVEN);
+		break;
+	case 3:		/*  6.00 Mhz */
+		iuu_clk(port, IUU_CLK_6000000 * boost / 100);
+		priv->clk = IUU_CLK_6000000;
+		/* Ratio of 6000000 to 3500000 for baud 9600 */
+		result =
+		    iuu_uart_baud(port, 16457 * boost / 100, &actual,
+				  IUU_PARITY_EVEN);
+		break;
+	default:		/*  3.579 Mhz */
+		iuu_clk(port, IUU_CLK_3579000 * boost / 100);
+		priv->clk = IUU_CLK_3579000;
+		result =
+		    iuu_uart_baud(port, baud * boost / 100, &actual,
+				  IUU_PARITY_EVEN);
+	}
+
+	/* set the cardin cardout signals */
+	switch (cdmode) {
+	case 0:
+		iuu_cardin = 0;
+		iuu_cardout = 0;
+		break;
+	case 1:
+		iuu_cardin = TIOCM_CD;
+		iuu_cardout =  0;
+		break;
+	case 2:
+		iuu_cardin = 0;
+		iuu_cardout = TIOCM_CD;
+		break;
+	case 3:
+		iuu_cardin = TIOCM_DSR;
+		iuu_cardout = 0;
+		break;
+	case 4:
+		iuu_cardin = 0;
+		iuu_cardout = TIOCM_DSR;
+		break;
+	case 5:
+		iuu_cardin = TIOCM_CTS;
+		iuu_cardout = 0;
+		break;
+	case 6:
+		iuu_cardin = 0;
+		iuu_cardout = TIOCM_CTS;
+		break;
+	case 7:
+		iuu_cardin = TIOCM_RNG;
+		iuu_cardout = 0;
+		break;
+	case 8:
+		iuu_cardin = 0;
+		iuu_cardout = TIOCM_RNG;
+	}
+
+	iuu_uart_flush(port);
+
+	dev_dbg(dev, "%s - initialization done\n", __func__);
+
+	memset(port->write_urb->transfer_buffer, IUU_UART_RX, 1);
+	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
+			  usb_sndbulkpipe(port->serial->dev,
+					  port->bulk_out_endpointAddress),
+			  port->write_urb->transfer_buffer, 1,
+			  read_rxcmd_callback, port);
+	result = usb_submit_urb(port->write_urb, GFP_KERNEL);
+	if (result) {
+		dev_err(dev, "%s - failed submitting read urb, error %d\n", __func__, result);
+		iuu_close(port);
+	} else {
+		dev_dbg(dev, "%s - rxcmd OK\n", __func__);
+	}
+
+	return result;
+}
+
+/* how to change VCC */
+static int iuu_vcc_set(struct usb_serial_port *port, unsigned int vcc)
+{
+	int status;
+	u8 *buf;
+
+	buf = kmalloc(5, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	buf[0] = IUU_SET_VCC;
+	buf[1] = vcc & 0xFF;
+	buf[2] = (vcc >> 8) & 0xFF;
+	buf[3] = (vcc >> 16) & 0xFF;
+	buf[4] = (vcc >> 24) & 0xFF;
+
+	status = bulk_immediate(port, buf, 5);
+	kfree(buf);
+
+	if (status != IUU_OPERATION_OK)
+		dev_dbg(&port->dev, "%s - vcc error status = %2x\n", __func__, status);
+	else
+		dev_dbg(&port->dev, "%s - vcc OK !\n", __func__);
+
+	return status;
+}
+
+/*
+ * Sysfs Attributes
+ */
+
+static ssize_t vcc_mode_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct usb_serial_port *port = to_usb_serial_port(dev);
+	struct iuu_private *priv = usb_get_serial_port_data(port);
+
+	return sprintf(buf, "%d\n", priv->vcc);
+}
+
+static ssize_t vcc_mode_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_serial_port *port = to_usb_serial_port(dev);
+	struct iuu_private *priv = usb_get_serial_port_data(port);
+	unsigned long v;
+
+	if (kstrtoul(buf, 10, &v)) {
+		dev_err(dev, "%s - vcc_mode: %s is not a unsigned long\n",
+				__func__, buf);
+		goto fail_store_vcc_mode;
+	}
+
+	dev_dbg(dev, "%s: setting vcc_mode = %ld\n", __func__, v);
+
+	if ((v != 3) && (v != 5)) {
+		dev_err(dev, "%s - vcc_mode %ld is invalid\n", __func__, v);
+	} else {
+		iuu_vcc_set(port, v);
+		priv->vcc = v;
+	}
+fail_store_vcc_mode:
+	return count;
+}
+static DEVICE_ATTR_RW(vcc_mode);
+
+static int iuu_create_sysfs_attrs(struct usb_serial_port *port)
+{
+	return device_create_file(&port->dev, &dev_attr_vcc_mode);
+}
+
+static int iuu_remove_sysfs_attrs(struct usb_serial_port *port)
+{
+	device_remove_file(&port->dev, &dev_attr_vcc_mode);
+	return 0;
+}
+
+/*
+ * End Sysfs Attributes
+ */
+
+static struct usb_serial_driver iuu_device = {
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .name = "iuu_phoenix",
+		   },
+	.id_table = id_table,
+	.num_ports = 1,
+	.num_bulk_in = 1,
+	.num_bulk_out = 1,
+	.bulk_in_size = 512,
+	.bulk_out_size = 512,
+	.open = iuu_open,
+	.close = iuu_close,
+	.write = iuu_uart_write,
+	.read_bulk_callback = iuu_uart_read_callback,
+	.tiocmget = iuu_tiocmget,
+	.tiocmset = iuu_tiocmset,
+	.set_termios = iuu_set_termios,
+	.init_termios = iuu_init_termios,
+	.port_probe = iuu_port_probe,
+	.port_remove = iuu_port_remove,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&iuu_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR("Alain Degreffe eczema@ecze.com");
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(xmas, bool, 0644);
+MODULE_PARM_DESC(xmas, "Xmas colors enabled or not");
+
+module_param(boost, int, 0644);
+MODULE_PARM_DESC(boost, "Card overclock boost (in percent 100-500)");
+
+module_param(clockmode, int, 0644);
+MODULE_PARM_DESC(clockmode, "Card clock mode (1=3.579 MHz, 2=3.680 MHz, "
+		"3=6 Mhz)");
+
+module_param(cdmode, int, 0644);
+MODULE_PARM_DESC(cdmode, "Card detect mode (0=none, 1=CD, 2=!CD, 3=DSR, "
+		 "4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING)");
+
+module_param(vcc_default, int, 0644);
+MODULE_PARM_DESC(vcc_default, "Set default VCC (either 3 for 3.3V or 5 "
+		"for 5V). Default to 5.");
diff --git a/drivers/usb/serial/iuu_phoenix.h b/drivers/usb/serial/iuu_phoenix.h
new file mode 100644
index 000000000..87992b24d
--- /dev/null
+++ b/drivers/usb/serial/iuu_phoenix.h
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Infinity Unlimited USB Phoenix driver
+ *
+ * Copyright (C) 2007 Alain Degreffe (eczema@ecze.com)
+ *
+ *
+ * Original code taken from iuutool ( Copyright (C) 2006 Juan Carlos Borrás )
+ *
+ *  And tested with help of WB Electronics
+ */
+
+#define   IUU_USB_VENDOR_ID  0x104f
+#define   IUU_USB_PRODUCT_ID  0x0004
+#define   IUU_USB_OP_TIMEOUT  0x0200
+
+/* Programmer commands */
+
+#define IUU_NO_OPERATION   0x00
+#define IUU_GET_FIRMWARE_VERSION   0x01
+#define IUU_GET_PRODUCT_NAME   0x02
+#define IUU_GET_STATE_REGISTER   0x03
+#define IUU_SET_LED   0x04
+#define IUU_WAIT_MUS   0x05
+#define IUU_WAIT_MS   0x06
+#define IUU_GET_LOADER_VERSION   0x50
+#define IUU_RST_SET   0x52
+#define IUU_RST_CLEAR   0x53
+#define IUU_SET_VCC   0x59
+#define IUU_UART_ENABLE   0x49
+#define IUU_UART_DISABLE   0x4A
+#define IUU_UART_WRITE_I2C   0x4C
+#define IUU_UART_ESC   0x5E
+#define IUU_UART_TRAP   0x54
+#define IUU_UART_TRAP_BREAK   0x5B
+#define IUU_UART_RX   0x56
+#define IUU_AVR_ON   0x21
+#define IUU_AVR_OFF   0x22
+#define IUU_AVR_1CLK   0x23
+#define IUU_AVR_RESET   0x24
+#define IUU_AVR_RESET_PC   0x25
+#define IUU_AVR_INC_PC   0x26
+#define IUU_AVR_INCN_PC   0x27
+#define IUU_AVR_PREAD   0x29
+#define IUU_AVR_PREADN   0x2A
+#define IUU_AVR_PWRITE   0x28
+#define IUU_AVR_DREAD   0x2C
+#define IUU_AVR_DREADN   0x2D
+#define IUU_AVR_DWRITE   0x2B
+#define IUU_AVR_PWRITEN   0x2E
+#define IUU_EEPROM_ON   0x37
+#define IUU_EEPROM_OFF   0x38
+#define IUU_EEPROM_WRITE   0x39
+#define IUU_EEPROM_WRITEX   0x3A
+#define IUU_EEPROM_WRITE8   0x3B
+#define IUU_EEPROM_WRITE16   0x3C
+#define IUU_EEPROM_WRITEX32   0x3D
+#define IUU_EEPROM_WRITEX64   0x3E
+#define IUU_EEPROM_READ   0x3F
+#define IUU_EEPROM_READX   0x40
+#define IUU_EEPROM_BREAD   0x41
+#define IUU_EEPROM_BREADX   0x42
+#define IUU_PIC_CMD   0x0A
+#define IUU_PIC_CMD_LOAD   0x0B
+#define IUU_PIC_CMD_READ   0x0C
+#define IUU_PIC_ON   0x0D
+#define IUU_PIC_OFF   0x0E
+#define IUU_PIC_RESET   0x16
+#define IUU_PIC_INC_PC   0x0F
+#define IUU_PIC_INCN_PC   0x10
+#define IUU_PIC_PWRITE   0x11
+#define IUU_PIC_PREAD   0x12
+#define IUU_PIC_PREADN   0x13
+#define IUU_PIC_DWRITE   0x14
+#define IUU_PIC_DREAD   0x15
+#define IUU_UART_NOP   0x00
+#define IUU_UART_CHANGE   0x02
+#define IUU_UART_TX   0x04
+#define IUU_DELAY_MS   0x06
+
+#define IUU_OPERATION_OK   0x00
+#define IUU_DEVICE_NOT_FOUND   0x01
+#define IUU_INVALID_HANDLE   0x02
+#define IUU_INVALID_PARAMETER   0x03
+#define IUU_INVALID_voidERFACE   0x04
+#define IUU_INVALID_REQUEST_LENGTH   0x05
+#define IUU_UART_NOT_ENABLED   0x06
+#define IUU_WRITE_ERROR   0x07
+#define IUU_READ_ERROR   0x08
+#define IUU_TX_ERROR   0x09
+#define IUU_RX_ERROR   0x0A
+
+#define IUU_PARITY_NONE   0x00
+#define IUU_PARITY_EVEN   0x01
+#define IUU_PARITY_ODD   0x02
+#define IUU_PARITY_MARK   0x03
+#define IUU_PARITY_SPACE   0x04
+#define IUU_SC_INSERTED   0x01
+#define IUU_VERIFY_ERROR   0x02
+#define IUU_SIM_INSERTED   0x04
+#define IUU_TWO_STOP_BITS   0x00
+#define IUU_ONE_STOP_BIT   0x20
+#define IUU_BAUD_2400   0x0398
+#define IUU_BAUD_9600   0x0298
+#define IUU_BAUD_19200   0x0164
+#define IUU_BAUD_28800   0x0198
+#define IUU_BAUD_38400   0x01B2
+#define IUU_BAUD_57600   0x0030
+#define IUU_BAUD_115200   0x0098
+#define IUU_CLK_3579000   3579000
+#define IUU_CLK_3680000   3680000
+#define IUU_CLK_6000000   6000000
+#define IUU_FULLCARD_IN   0x01
+#define IUU_DEV_ERROR   0x02
+#define IUU_MINICARD_IN   0x04
+#define IUU_VCC_5V   0x00
+#define IUU_VCC_3V   0x01
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
new file mode 100644
index 000000000..2966e0c49
--- /dev/null
+++ b/drivers/usb/serial/keyspan.c
@@ -0,0 +1,3105 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+  Keyspan USB to Serial Converter driver
+
+  (C) Copyright (C) 2000-2001	Hugh Blemings <hugh@blemings.org>
+  (C) Copyright (C) 2002	Greg Kroah-Hartman <greg@kroah.com>
+
+  See http://blemings.org/hugh/keyspan.html for more information.
+
+  Code in this driver inspired by and in a number of places taken
+  from Brian Warner's original Keyspan-PDA driver.
+
+  This driver has been put together with the support of Innosys, Inc.
+  and Keyspan, Inc the manufacturers of the Keyspan USB-serial products.
+  Thanks Guys :)
+
+  Thanks to Paulus for miscellaneous tidy ups, some largish chunks
+  of much nicer and/or completely new code and (perhaps most uniquely)
+  having the patience to sit down and explain why and where he'd changed
+  stuff.
+
+  Tip 'o the hat to IBM (and previously Linuxcare :) for supporting
+  staff in their work on open source projects.
+*/
+
+
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/usb/ezusb.h>
+
+#define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu"
+#define DRIVER_DESC "Keyspan USB to Serial Converter Driver"
+
+static void keyspan_send_setup(struct usb_serial_port *port, int reset_port);
+
+static int keyspan_usa19_calc_baud(struct usb_serial_port *port,
+				   u32 baud_rate, u32 baudclk,
+				   u8 *rate_hi, u8 *rate_low,
+				   u8 *prescaler, int portnum);
+static int keyspan_usa19w_calc_baud(struct usb_serial_port *port,
+				    u32 baud_rate, u32 baudclk,
+				    u8 *rate_hi, u8 *rate_low,
+				    u8 *prescaler, int portnum);
+static int keyspan_usa28_calc_baud(struct usb_serial_port *port,
+				   u32 baud_rate, u32 baudclk,
+				   u8 *rate_hi, u8 *rate_low,
+				   u8 *prescaler, int portnum);
+static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port,
+				     u32 baud_rate, u32 baudclk,
+				     u8 *rate_hi, u8 *rate_low,
+				     u8 *prescaler, int portnum);
+
+static int keyspan_usa28_send_setup(struct usb_serial *serial,
+				    struct usb_serial_port *port,
+				    int reset_port);
+static int keyspan_usa26_send_setup(struct usb_serial *serial,
+				    struct usb_serial_port *port,
+				    int reset_port);
+static int keyspan_usa49_send_setup(struct usb_serial *serial,
+				    struct usb_serial_port *port,
+				    int reset_port);
+static int keyspan_usa90_send_setup(struct usb_serial *serial,
+				    struct usb_serial_port *port,
+				    int reset_port);
+static int keyspan_usa67_send_setup(struct usb_serial *serial,
+				    struct usb_serial_port *port,
+				    int reset_port);
+
+/* Values used for baud rate calculation - device specific */
+#define KEYSPAN_INVALID_BAUD_RATE		(-1)
+#define KEYSPAN_BAUD_RATE_OK			(0)
+#define KEYSPAN_USA18X_BAUDCLK			(12000000L)	/* a guess */
+#define KEYSPAN_USA19_BAUDCLK			(12000000L)
+#define KEYSPAN_USA19W_BAUDCLK			(24000000L)
+#define KEYSPAN_USA19HS_BAUDCLK			(14769231L)
+#define KEYSPAN_USA28_BAUDCLK			(1843200L)
+#define KEYSPAN_USA28X_BAUDCLK			(12000000L)
+#define KEYSPAN_USA49W_BAUDCLK			(48000000L)
+
+/* Some constants used to characterise each device.  */
+#define KEYSPAN_MAX_NUM_PORTS			(4)
+#define KEYSPAN_MAX_FLIPS			(2)
+
+/*
+ * Device info for the Keyspan serial converter, used by the overall
+ * usb-serial probe function.
+ */
+#define KEYSPAN_VENDOR_ID			(0x06cd)
+
+/* Product IDs for the products supported, pre-renumeration */
+#define keyspan_usa18x_pre_product_id		0x0105
+#define keyspan_usa19_pre_product_id		0x0103
+#define keyspan_usa19qi_pre_product_id		0x010b
+#define keyspan_mpr_pre_product_id		0x011b
+#define keyspan_usa19qw_pre_product_id		0x0118
+#define keyspan_usa19w_pre_product_id		0x0106
+#define keyspan_usa28_pre_product_id		0x0101
+#define keyspan_usa28x_pre_product_id		0x0102
+#define keyspan_usa28xa_pre_product_id		0x0114
+#define keyspan_usa28xb_pre_product_id		0x0113
+#define keyspan_usa49w_pre_product_id		0x0109
+#define keyspan_usa49wlc_pre_product_id		0x011a
+
+/*
+ * Product IDs post-renumeration.  Note that the 28x and 28xb have the same
+ * id's post-renumeration but behave identically so it's not an issue. As
+ * such, the 28xb is not listed in any of the device tables.
+ */
+#define keyspan_usa18x_product_id		0x0112
+#define keyspan_usa19_product_id		0x0107
+#define keyspan_usa19qi_product_id		0x010c
+#define keyspan_usa19hs_product_id		0x0121
+#define keyspan_mpr_product_id			0x011c
+#define keyspan_usa19qw_product_id		0x0119
+#define keyspan_usa19w_product_id		0x0108
+#define keyspan_usa28_product_id		0x010f
+#define keyspan_usa28x_product_id		0x0110
+#define keyspan_usa28xa_product_id		0x0115
+#define keyspan_usa28xb_product_id		0x0110
+#define keyspan_usa28xg_product_id		0x0135
+#define keyspan_usa49w_product_id		0x010a
+#define keyspan_usa49wlc_product_id		0x012a
+#define keyspan_usa49wg_product_id		0x0131
+
+struct keyspan_device_details {
+	/* product ID value */
+	int	product_id;
+
+	enum	{msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67} msg_format;
+
+		/* Number of physical ports */
+	int	num_ports;
+
+		/* 1 if endpoint flipping used on input, 0 if not */
+	int	indat_endp_flip;
+
+		/* 1 if endpoint flipping used on output, 0 if not */
+	int	outdat_endp_flip;
+
+		/*
+		 * Table mapping input data endpoint IDs to physical port
+		 * number and flip if used
+		 */
+	int	indat_endpoints[KEYSPAN_MAX_NUM_PORTS];
+
+		/* Same for output endpoints */
+	int	outdat_endpoints[KEYSPAN_MAX_NUM_PORTS];
+
+		/* Input acknowledge endpoints */
+	int	inack_endpoints[KEYSPAN_MAX_NUM_PORTS];
+
+		/* Output control endpoints */
+	int	outcont_endpoints[KEYSPAN_MAX_NUM_PORTS];
+
+		/* Endpoint used for input status */
+	int	instat_endpoint;
+
+		/* Endpoint used for input data 49WG only */
+	int	indat_endpoint;
+
+		/* Endpoint used for global control functions */
+	int	glocont_endpoint;
+
+	int	(*calculate_baud_rate)(struct usb_serial_port *port,
+				       u32 baud_rate, u32 baudclk,
+				       u8 *rate_hi, u8 *rate_low, u8 *prescaler,
+				       int portnum);
+	u32	baudclk;
+};
+
+/*
+ * Now for each device type we setup the device detail structure with the
+ * appropriate information (provided in Keyspan's documentation)
+ */
+
+static const struct keyspan_device_details usa18x_device_details = {
+	.product_id		= keyspan_usa18x_product_id,
+	.msg_format		= msg_usa26,
+	.num_ports		= 1,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81},
+	.outdat_endpoints	= {0x01},
+	.inack_endpoints	= {0x85},
+	.outcont_endpoints	= {0x05},
+	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x07,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA18X_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19_device_details = {
+	.product_id		= keyspan_usa19_product_id,
+	.msg_format		= msg_usa28,
+	.num_ports		= 1,
+	.indat_endp_flip	= 1,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81},
+	.outdat_endpoints	= {0x01},
+	.inack_endpoints	= {0x83},
+	.outcont_endpoints	= {0x03},
+	.instat_endpoint	= 0x84,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= -1,
+	.calculate_baud_rate	= keyspan_usa19_calc_baud,
+	.baudclk		= KEYSPAN_USA19_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19qi_device_details = {
+	.product_id		= keyspan_usa19qi_product_id,
+	.msg_format		= msg_usa28,
+	.num_ports		= 1,
+	.indat_endp_flip	= 1,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81},
+	.outdat_endpoints	= {0x01},
+	.inack_endpoints	= {0x83},
+	.outcont_endpoints	= {0x03},
+	.instat_endpoint	= 0x84,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= -1,
+	.calculate_baud_rate	= keyspan_usa28_calc_baud,
+	.baudclk		= KEYSPAN_USA19_BAUDCLK,
+};
+
+static const struct keyspan_device_details mpr_device_details = {
+	.product_id		= keyspan_mpr_product_id,
+	.msg_format		= msg_usa28,
+	.num_ports		= 1,
+	.indat_endp_flip	= 1,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81},
+	.outdat_endpoints	= {0x01},
+	.inack_endpoints	= {0x83},
+	.outcont_endpoints	= {0x03},
+	.instat_endpoint	= 0x84,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= -1,
+	.calculate_baud_rate	= keyspan_usa28_calc_baud,
+	.baudclk		= KEYSPAN_USA19_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19qw_device_details = {
+	.product_id		= keyspan_usa19qw_product_id,
+	.msg_format		= msg_usa26,
+	.num_ports		= 1,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81},
+	.outdat_endpoints	= {0x01},
+	.inack_endpoints	= {0x85},
+	.outcont_endpoints	= {0x05},
+	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x07,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA19W_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19w_device_details = {
+	.product_id		= keyspan_usa19w_product_id,
+	.msg_format		= msg_usa26,
+	.num_ports		= 1,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81},
+	.outdat_endpoints	= {0x01},
+	.inack_endpoints	= {0x85},
+	.outcont_endpoints	= {0x05},
+	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x07,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA19W_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19hs_device_details = {
+	.product_id		= keyspan_usa19hs_product_id,
+	.msg_format		= msg_usa90,
+	.num_ports		= 1,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 0,
+	.indat_endpoints	= {0x81},
+	.outdat_endpoints	= {0x01},
+	.inack_endpoints	= {-1},
+	.outcont_endpoints	= {0x02},
+	.instat_endpoint	= 0x82,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= -1,
+	.calculate_baud_rate	= keyspan_usa19hs_calc_baud,
+	.baudclk		= KEYSPAN_USA19HS_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa28_device_details = {
+	.product_id		= keyspan_usa28_product_id,
+	.msg_format		= msg_usa28,
+	.num_ports		= 2,
+	.indat_endp_flip	= 1,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81, 0x83},
+	.outdat_endpoints	= {0x01, 0x03},
+	.inack_endpoints	= {0x85, 0x86},
+	.outcont_endpoints	= {0x05, 0x06},
+	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x07,
+	.calculate_baud_rate	= keyspan_usa28_calc_baud,
+	.baudclk		= KEYSPAN_USA28_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa28x_device_details = {
+	.product_id		= keyspan_usa28x_product_id,
+	.msg_format		= msg_usa26,
+	.num_ports		= 2,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81, 0x83},
+	.outdat_endpoints	= {0x01, 0x03},
+	.inack_endpoints	= {0x85, 0x86},
+	.outcont_endpoints	= {0x05, 0x06},
+	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x07,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA28X_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa28xa_device_details = {
+	.product_id		= keyspan_usa28xa_product_id,
+	.msg_format		= msg_usa26,
+	.num_ports		= 2,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81, 0x83},
+	.outdat_endpoints	= {0x01, 0x03},
+	.inack_endpoints	= {0x85, 0x86},
+	.outcont_endpoints	= {0x05, 0x06},
+	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x07,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA28X_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa28xg_device_details = {
+	.product_id		= keyspan_usa28xg_product_id,
+	.msg_format		= msg_usa67,
+	.num_ports		= 2,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 0,
+	.indat_endpoints	= {0x84, 0x88},
+	.outdat_endpoints	= {0x02, 0x06},
+	.inack_endpoints	= {-1, -1},
+	.outcont_endpoints	= {-1, -1},
+	.instat_endpoint	= 0x81,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x01,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA28X_BAUDCLK,
+};
+/*
+ * We don't need a separate entry for the usa28xb as it appears as a 28x
+ * anyway.
+ */
+
+static const struct keyspan_device_details usa49w_device_details = {
+	.product_id		= keyspan_usa49w_product_id,
+	.msg_format		= msg_usa49,
+	.num_ports		= 4,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 0,
+	.indat_endpoints	= {0x81, 0x82, 0x83, 0x84},
+	.outdat_endpoints	= {0x01, 0x02, 0x03, 0x04},
+	.inack_endpoints	= {-1, -1, -1, -1},
+	.outcont_endpoints	= {-1, -1, -1, -1},
+	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x07,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA49W_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa49wlc_device_details = {
+	.product_id		= keyspan_usa49wlc_product_id,
+	.msg_format		= msg_usa49,
+	.num_ports		= 4,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 0,
+	.indat_endpoints	= {0x81, 0x82, 0x83, 0x84},
+	.outdat_endpoints	= {0x01, 0x02, 0x03, 0x04},
+	.inack_endpoints	= {-1, -1, -1, -1},
+	.outcont_endpoints	= {-1, -1, -1, -1},
+	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x07,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA19W_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa49wg_device_details = {
+	.product_id		= keyspan_usa49wg_product_id,
+	.msg_format		= msg_usa49,
+	.num_ports		= 4,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 0,
+	.indat_endpoints	= {-1, -1, -1, -1},	/* single 'global' data in EP */
+	.outdat_endpoints	= {0x01, 0x02, 0x04, 0x06},
+	.inack_endpoints	= {-1, -1, -1, -1},
+	.outcont_endpoints	= {-1, -1, -1, -1},
+	.instat_endpoint	= 0x81,
+	.indat_endpoint		= 0x88,
+	.glocont_endpoint	= 0x00,			/* uses control EP */
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA19W_BAUDCLK,
+};
+
+static const struct keyspan_device_details *keyspan_devices[] = {
+	&usa18x_device_details,
+	&usa19_device_details,
+	&usa19qi_device_details,
+	&mpr_device_details,
+	&usa19qw_device_details,
+	&usa19w_device_details,
+	&usa19hs_device_details,
+	&usa28_device_details,
+	&usa28x_device_details,
+	&usa28xa_device_details,
+	&usa28xg_device_details,
+	/* 28xb not required as it renumerates as a 28x */
+	&usa49w_device_details,
+	&usa49wlc_device_details,
+	&usa49wg_device_details,
+	NULL,
+};
+
+static const struct usb_device_id keyspan_ids_combined[] = {
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)},
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
+	{ } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, keyspan_ids_combined);
+
+/* usb_device_id table for the pre-firmware download keyspan devices */
+static const struct usb_device_id keyspan_pre_ids[] = {
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
+	{ } /* Terminating entry */
+};
+
+static const struct usb_device_id keyspan_1port_ids[] = {
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
+	{ } /* Terminating entry */
+};
+
+static const struct usb_device_id keyspan_2port_ids[] = {
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
+	{ } /* Terminating entry */
+};
+
+static const struct usb_device_id keyspan_4port_ids[] = {
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
+	{ } /* Terminating entry */
+};
+
+#define INSTAT_BUFLEN	32
+#define GLOCONT_BUFLEN	64
+#define INDAT49W_BUFLEN	512
+#define IN_BUFLEN	64
+#define OUT_BUFLEN	64
+#define INACK_BUFLEN	1
+#define OUTCONT_BUFLEN	64
+
+	/* Per device and per port private data */
+struct keyspan_serial_private {
+	const struct keyspan_device_details	*device_details;
+
+	struct urb	*instat_urb;
+	char		*instat_buf;
+
+	/* added to support 49wg, where data from all 4 ports comes in
+	   on 1 EP and high-speed supported */
+	struct urb	*indat_urb;
+	char		*indat_buf;
+
+	/* XXX this one probably will need a lock */
+	struct urb	*glocont_urb;
+	char		*glocont_buf;
+	char		*ctrl_buf;	/* for EP0 control message */
+};
+
+struct keyspan_port_private {
+	/* Keep track of which input & output endpoints to use */
+	int		in_flip;
+	int		out_flip;
+
+	/* Keep duplicate of device details in each port
+	   structure as well - simplifies some of the
+	   callback functions etc. */
+	const struct keyspan_device_details	*device_details;
+
+	/* Input endpoints and buffer for this port */
+	struct urb	*in_urbs[2];
+	char		*in_buffer[2];
+	/* Output endpoints and buffer for this port */
+	struct urb	*out_urbs[2];
+	char		*out_buffer[2];
+
+	/* Input ack endpoint */
+	struct urb	*inack_urb;
+	char		*inack_buffer;
+
+	/* Output control endpoint */
+	struct urb	*outcont_urb;
+	char		*outcont_buffer;
+
+	/* Settings for the port */
+	int		baud;
+	int		old_baud;
+	unsigned int	cflag;
+	unsigned int	old_cflag;
+	enum		{flow_none, flow_cts, flow_xon} flow_control;
+	int		rts_state;	/* Handshaking pins (outputs) */
+	int		dtr_state;
+	int		cts_state;	/* Handshaking pins (inputs) */
+	int		dsr_state;
+	int		dcd_state;
+	int		ri_state;
+	int		break_on;
+
+	unsigned long	tx_start_time[2];
+	int		resend_cont;	/* need to resend control packet */
+};
+
+/* Include Keyspan message headers.  All current Keyspan Adapters
+   make use of one of five message formats which are referred
+   to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and
+   within this driver. */
+#include "keyspan_usa26msg.h"
+#include "keyspan_usa28msg.h"
+#include "keyspan_usa49msg.h"
+#include "keyspan_usa90msg.h"
+#include "keyspan_usa67msg.h"
+
+
+static void keyspan_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct keyspan_port_private 	*p_priv;
+
+	p_priv = usb_get_serial_port_data(port);
+
+	if (break_state == -1)
+		p_priv->break_on = 1;
+	else
+		p_priv->break_on = 0;
+
+	keyspan_send_setup(port, 0);
+}
+
+
+static void keyspan_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
+				const struct ktermios *old_termios)
+{
+	int				baud_rate, device_port;
+	struct keyspan_port_private 	*p_priv;
+	const struct keyspan_device_details	*d_details;
+	unsigned int 			cflag;
+
+	p_priv = usb_get_serial_port_data(port);
+	d_details = p_priv->device_details;
+	cflag = tty->termios.c_cflag;
+	device_port = port->port_number;
+
+	/* Baud rate calculation takes baud rate as an integer
+	   so other rates can be generated if desired. */
+	baud_rate = tty_get_baud_rate(tty);
+	/* If no match or invalid, don't change */
+	if (d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk,
+				NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
+		/* FIXME - more to do here to ensure rate changes cleanly */
+		/* FIXME - calculate exact rate from divisor ? */
+		p_priv->baud = baud_rate;
+	} else
+		baud_rate = tty_termios_baud_rate(old_termios);
+
+	tty_encode_baud_rate(tty, baud_rate, baud_rate);
+	/* set CTS/RTS handshake etc. */
+	p_priv->cflag = cflag;
+	p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none;
+
+	/* Mark/Space not supported */
+	tty->termios.c_cflag &= ~CMSPAR;
+
+	keyspan_send_setup(port, 0);
+}
+
+static int keyspan_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
+	unsigned int			value;
+
+	value = ((p_priv->rts_state) ? TIOCM_RTS : 0) |
+		((p_priv->dtr_state) ? TIOCM_DTR : 0) |
+		((p_priv->cts_state) ? TIOCM_CTS : 0) |
+		((p_priv->dsr_state) ? TIOCM_DSR : 0) |
+		((p_priv->dcd_state) ? TIOCM_CAR : 0) |
+		((p_priv->ri_state) ? TIOCM_RNG : 0);
+
+	return value;
+}
+
+static int keyspan_tiocmset(struct tty_struct *tty,
+			    unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
+
+	if (set & TIOCM_RTS)
+		p_priv->rts_state = 1;
+	if (set & TIOCM_DTR)
+		p_priv->dtr_state = 1;
+	if (clear & TIOCM_RTS)
+		p_priv->rts_state = 0;
+	if (clear & TIOCM_DTR)
+		p_priv->dtr_state = 0;
+	keyspan_send_setup(port, 0);
+	return 0;
+}
+
+/* Write function is similar for the four protocols used
+   with only a minor change for usa90 (usa19hs) required */
+static int keyspan_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count)
+{
+	struct keyspan_port_private 	*p_priv;
+	const struct keyspan_device_details	*d_details;
+	int				flip;
+	int 				left, todo;
+	struct urb			*this_urb;
+	int 				err, maxDataLen, dataOffset;
+
+	p_priv = usb_get_serial_port_data(port);
+	d_details = p_priv->device_details;
+
+	if (d_details->msg_format == msg_usa90) {
+		maxDataLen = 64;
+		dataOffset = 0;
+	} else {
+		maxDataLen = 63;
+		dataOffset = 1;
+	}
+
+	dev_dbg(&port->dev, "%s - %d chars, flip=%d\n", __func__, count,
+		p_priv->out_flip);
+
+	for (left = count; left > 0; left -= todo) {
+		todo = left;
+		if (todo > maxDataLen)
+			todo = maxDataLen;
+
+		flip = p_priv->out_flip;
+
+		/* Check we have a valid urb/endpoint before we use it... */
+		this_urb = p_priv->out_urbs[flip];
+		if (this_urb == NULL) {
+			/* no bulk out, so return 0 bytes written */
+			dev_dbg(&port->dev, "%s - no output urb :(\n", __func__);
+			return count;
+		}
+
+		dev_dbg(&port->dev, "%s - endpoint %x flip %d\n",
+			__func__, usb_pipeendpoint(this_urb->pipe), flip);
+
+		if (this_urb->status == -EINPROGRESS) {
+			if (time_before(jiffies,
+					p_priv->tx_start_time[flip] + 10 * HZ))
+				break;
+			usb_unlink_urb(this_urb);
+			break;
+		}
+
+		/* First byte in buffer is "last flag" (except for usa19hx)
+		   - unused so for now so set to zero */
+		((char *)this_urb->transfer_buffer)[0] = 0;
+
+		memcpy(this_urb->transfer_buffer + dataOffset, buf, todo);
+		buf += todo;
+
+		/* send the data out the bulk port */
+		this_urb->transfer_buffer_length = todo + dataOffset;
+
+		err = usb_submit_urb(this_urb, GFP_ATOMIC);
+		if (err != 0)
+			dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed (%d)\n", err);
+		p_priv->tx_start_time[flip] = jiffies;
+
+		/* Flip for next time if usa26 or usa28 interface
+		   (not used on usa49) */
+		p_priv->out_flip = (flip + 1) & d_details->outdat_endp_flip;
+	}
+
+	return count - left;
+}
+
+static void	usa26_indat_callback(struct urb *urb)
+{
+	int			i, err;
+	int			endpoint;
+	struct usb_serial_port	*port;
+	unsigned char 		*data = urb->transfer_buffer;
+	int status = urb->status;
+
+	endpoint = usb_pipeendpoint(urb->pipe);
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
+			__func__, status, endpoint);
+		return;
+	}
+
+	port =  urb->context;
+	if (urb->actual_length) {
+		/* 0x80 bit is error flag */
+		if ((data[0] & 0x80) == 0) {
+			/* no errors on individual bytes, only
+			   possible overrun err */
+			if (data[0] & RXERROR_OVERRUN) {
+				tty_insert_flip_char(&port->port, 0,
+								TTY_OVERRUN);
+			}
+			for (i = 1; i < urb->actual_length ; ++i)
+				tty_insert_flip_char(&port->port, data[i],
+								TTY_NORMAL);
+		} else {
+			/* some bytes had errors, every byte has status */
+			dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
+			for (i = 0; i + 1 < urb->actual_length; i += 2) {
+				int stat = data[i];
+				int flag = TTY_NORMAL;
+
+				if (stat & RXERROR_OVERRUN) {
+					tty_insert_flip_char(&port->port, 0,
+								TTY_OVERRUN);
+				}
+				/* XXX should handle break (0x10) */
+				if (stat & RXERROR_PARITY)
+					flag = TTY_PARITY;
+				else if (stat & RXERROR_FRAMING)
+					flag = TTY_FRAME;
+
+				tty_insert_flip_char(&port->port, data[i+1],
+						flag);
+			}
+		}
+		tty_flip_buffer_push(&port->port);
+	}
+
+	/* Resubmit urb so we continue receiving */
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+}
+
+/* Outdat handling is common for all devices */
+static void	usa2x_outdat_callback(struct urb *urb)
+{
+	struct usb_serial_port *port;
+	struct keyspan_port_private *p_priv;
+
+	port =  urb->context;
+	p_priv = usb_get_serial_port_data(port);
+	dev_dbg(&port->dev, "%s - urb %d\n", __func__, urb == p_priv->out_urbs[1]);
+
+	usb_serial_port_softint(port);
+}
+
+static void	usa26_inack_callback(struct urb *urb)
+{
+}
+
+static void	usa26_outcont_callback(struct urb *urb)
+{
+	struct usb_serial_port *port;
+	struct keyspan_port_private *p_priv;
+
+	port =  urb->context;
+	p_priv = usb_get_serial_port_data(port);
+
+	if (p_priv->resend_cont) {
+		dev_dbg(&port->dev, "%s - sending setup\n", __func__);
+		keyspan_usa26_send_setup(port->serial, port,
+						p_priv->resend_cont - 1);
+	}
+}
+
+static void	usa26_instat_callback(struct urb *urb)
+{
+	unsigned char 				*data = urb->transfer_buffer;
+	struct keyspan_usa26_portStatusMessage	*msg;
+	struct usb_serial			*serial;
+	struct usb_serial_port			*port;
+	struct keyspan_port_private	 	*p_priv;
+	int old_dcd_state, err;
+	int status = urb->status;
+
+	serial =  urb->context;
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+				__func__, status);
+		return;
+	}
+	if (urb->actual_length != 9) {
+		dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length);
+		goto exit;
+	}
+
+	msg = (struct keyspan_usa26_portStatusMessage *)data;
+
+	/* Check port number from message and retrieve private data */
+	if (msg->port >= serial->num_ports) {
+		dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
+		goto exit;
+	}
+	port = serial->port[msg->port];
+	p_priv = usb_get_serial_port_data(port);
+	if (!p_priv)
+		goto resubmit;
+
+	/* Update handshaking pin state information */
+	old_dcd_state = p_priv->dcd_state;
+	p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
+	p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
+	p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
+	p_priv->ri_state = ((msg->ri) ? 1 : 0);
+
+	if (old_dcd_state != p_priv->dcd_state)
+		tty_port_tty_hangup(&port->port, true);
+resubmit:
+	/* Resubmit urb so we continue receiving */
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+exit: ;
+}
+
+static void	usa26_glocont_callback(struct urb *urb)
+{
+}
+
+
+static void usa28_indat_callback(struct urb *urb)
+{
+	int                     err;
+	struct usb_serial_port  *port;
+	unsigned char           *data;
+	struct keyspan_port_private             *p_priv;
+	int status = urb->status;
+
+	port =  urb->context;
+	p_priv = usb_get_serial_port_data(port);
+	data = urb->transfer_buffer;
+
+	if (urb != p_priv->in_urbs[p_priv->in_flip])
+		return;
+
+	do {
+		if (status) {
+			dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
+				__func__, status, usb_pipeendpoint(urb->pipe));
+			return;
+		}
+
+		port =  urb->context;
+		p_priv = usb_get_serial_port_data(port);
+		data = urb->transfer_buffer;
+
+		if (urb->actual_length) {
+			tty_insert_flip_string(&port->port, data,
+					urb->actual_length);
+			tty_flip_buffer_push(&port->port);
+		}
+
+		/* Resubmit urb so we continue receiving */
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err != 0)
+			dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n",
+							__func__, err);
+		p_priv->in_flip ^= 1;
+
+		urb = p_priv->in_urbs[p_priv->in_flip];
+	} while (urb->status != -EINPROGRESS);
+}
+
+static void	usa28_inack_callback(struct urb *urb)
+{
+}
+
+static void	usa28_outcont_callback(struct urb *urb)
+{
+	struct usb_serial_port *port;
+	struct keyspan_port_private *p_priv;
+
+	port =  urb->context;
+	p_priv = usb_get_serial_port_data(port);
+
+	if (p_priv->resend_cont) {
+		dev_dbg(&port->dev, "%s - sending setup\n", __func__);
+		keyspan_usa28_send_setup(port->serial, port,
+						p_priv->resend_cont - 1);
+	}
+}
+
+static void	usa28_instat_callback(struct urb *urb)
+{
+	int					err;
+	unsigned char 				*data = urb->transfer_buffer;
+	struct keyspan_usa28_portStatusMessage	*msg;
+	struct usb_serial			*serial;
+	struct usb_serial_port			*port;
+	struct keyspan_port_private	 	*p_priv;
+	int old_dcd_state;
+	int status = urb->status;
+
+	serial =  urb->context;
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+				__func__, status);
+		return;
+	}
+
+	if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) {
+		dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
+		goto exit;
+	}
+
+	msg = (struct keyspan_usa28_portStatusMessage *)data;
+
+	/* Check port number from message and retrieve private data */
+	if (msg->port >= serial->num_ports) {
+		dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
+		goto exit;
+	}
+	port = serial->port[msg->port];
+	p_priv = usb_get_serial_port_data(port);
+	if (!p_priv)
+		goto resubmit;
+
+	/* Update handshaking pin state information */
+	old_dcd_state = p_priv->dcd_state;
+	p_priv->cts_state = ((msg->cts) ? 1 : 0);
+	p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
+	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
+	p_priv->ri_state = ((msg->ri) ? 1 : 0);
+
+	if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
+		tty_port_tty_hangup(&port->port, true);
+resubmit:
+		/* Resubmit urb so we continue receiving */
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+exit: ;
+}
+
+static void	usa28_glocont_callback(struct urb *urb)
+{
+}
+
+
+static void	usa49_glocont_callback(struct urb *urb)
+{
+	struct usb_serial *serial;
+	struct usb_serial_port *port;
+	struct keyspan_port_private *p_priv;
+	int i;
+
+	serial =  urb->context;
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		p_priv = usb_get_serial_port_data(port);
+		if (!p_priv)
+			continue;
+
+		if (p_priv->resend_cont) {
+			dev_dbg(&port->dev, "%s - sending setup\n", __func__);
+			keyspan_usa49_send_setup(serial, port,
+						p_priv->resend_cont - 1);
+			break;
+		}
+	}
+}
+
+	/* This is actually called glostat in the Keyspan
+	   doco */
+static void	usa49_instat_callback(struct urb *urb)
+{
+	int					err;
+	unsigned char 				*data = urb->transfer_buffer;
+	struct keyspan_usa49_portStatusMessage	*msg;
+	struct usb_serial			*serial;
+	struct usb_serial_port			*port;
+	struct keyspan_port_private	 	*p_priv;
+	int old_dcd_state;
+	int status = urb->status;
+
+	serial =  urb->context;
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+				__func__, status);
+		return;
+	}
+
+	if (urb->actual_length !=
+			sizeof(struct keyspan_usa49_portStatusMessage)) {
+		dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
+		goto exit;
+	}
+
+	msg = (struct keyspan_usa49_portStatusMessage *)data;
+
+	/* Check port number from message and retrieve private data */
+	if (msg->portNumber >= serial->num_ports) {
+		dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n",
+			__func__, msg->portNumber);
+		goto exit;
+	}
+	port = serial->port[msg->portNumber];
+	p_priv = usb_get_serial_port_data(port);
+	if (!p_priv)
+		goto resubmit;
+
+	/* Update handshaking pin state information */
+	old_dcd_state = p_priv->dcd_state;
+	p_priv->cts_state = ((msg->cts) ? 1 : 0);
+	p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
+	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
+	p_priv->ri_state = ((msg->ri) ? 1 : 0);
+
+	if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
+		tty_port_tty_hangup(&port->port, true);
+resubmit:
+	/* Resubmit urb so we continue receiving */
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+exit:	;
+}
+
+static void	usa49_inack_callback(struct urb *urb)
+{
+}
+
+static void	usa49_indat_callback(struct urb *urb)
+{
+	int			i, err;
+	int			endpoint;
+	struct usb_serial_port	*port;
+	unsigned char 		*data = urb->transfer_buffer;
+	int status = urb->status;
+
+	endpoint = usb_pipeendpoint(urb->pipe);
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
+			__func__, status, endpoint);
+		return;
+	}
+
+	port =  urb->context;
+	if (urb->actual_length) {
+		/* 0x80 bit is error flag */
+		if ((data[0] & 0x80) == 0) {
+			/* no error on any byte */
+			tty_insert_flip_string(&port->port, data + 1,
+						urb->actual_length - 1);
+		} else {
+			/* some bytes had errors, every byte has status */
+			for (i = 0; i + 1 < urb->actual_length; i += 2) {
+				int stat = data[i];
+				int flag = TTY_NORMAL;
+
+				if (stat & RXERROR_OVERRUN) {
+					tty_insert_flip_char(&port->port, 0,
+								TTY_OVERRUN);
+				}
+				/* XXX should handle break (0x10) */
+				if (stat & RXERROR_PARITY)
+					flag = TTY_PARITY;
+				else if (stat & RXERROR_FRAMING)
+					flag = TTY_FRAME;
+
+				tty_insert_flip_char(&port->port, data[i+1],
+						flag);
+			}
+		}
+		tty_flip_buffer_push(&port->port);
+	}
+
+	/* Resubmit urb so we continue receiving */
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+}
+
+static void usa49wg_indat_callback(struct urb *urb)
+{
+	int			i, len, x, err;
+	struct usb_serial	*serial;
+	struct usb_serial_port	*port;
+	unsigned char 		*data = urb->transfer_buffer;
+	int status = urb->status;
+
+	serial = urb->context;
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+				__func__, status);
+		return;
+	}
+
+	/* inbound data is in the form P#, len, status, data */
+	i = 0;
+	len = 0;
+
+	while (i < urb->actual_length) {
+
+		/* Check port number from message */
+		if (data[i] >= serial->num_ports) {
+			dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n",
+				__func__, data[i]);
+			return;
+		}
+		port = serial->port[data[i++]];
+		len = data[i++];
+
+		/* 0x80 bit is error flag */
+		if ((data[i] & 0x80) == 0) {
+			/* no error on any byte */
+			i++;
+			for (x = 1; x < len && i < urb->actual_length; ++x)
+				tty_insert_flip_char(&port->port,
+						data[i++], 0);
+		} else {
+			/*
+			 * some bytes had errors, every byte has status
+			 */
+			for (x = 0; x + 1 < len &&
+				    i + 1 < urb->actual_length; x += 2) {
+				int stat = data[i];
+				int flag = TTY_NORMAL;
+
+				if (stat & RXERROR_OVERRUN) {
+					tty_insert_flip_char(&port->port, 0,
+								TTY_OVERRUN);
+				}
+				/* XXX should handle break (0x10) */
+				if (stat & RXERROR_PARITY)
+					flag = TTY_PARITY;
+				else if (stat & RXERROR_FRAMING)
+					flag = TTY_FRAME;
+
+				tty_insert_flip_char(&port->port, data[i+1],
+						     flag);
+				i += 2;
+			}
+		}
+		tty_flip_buffer_push(&port->port);
+	}
+
+	/* Resubmit urb so we continue receiving */
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dev_dbg(&urb->dev->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+}
+
+/* not used, usa-49 doesn't have per-port control endpoints */
+static void usa49_outcont_callback(struct urb *urb)
+{
+}
+
+static void usa90_indat_callback(struct urb *urb)
+{
+	int			i, err;
+	int			endpoint;
+	struct usb_serial_port	*port;
+	struct keyspan_port_private	 	*p_priv;
+	unsigned char 		*data = urb->transfer_buffer;
+	int status = urb->status;
+
+	endpoint = usb_pipeendpoint(urb->pipe);
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
+			__func__, status, endpoint);
+		return;
+	}
+
+	port =  urb->context;
+	p_priv = usb_get_serial_port_data(port);
+
+	if (urb->actual_length) {
+		/* if current mode is DMA, looks like usa28 format
+		   otherwise looks like usa26 data format */
+
+		if (p_priv->baud > 57600)
+			tty_insert_flip_string(&port->port, data,
+					urb->actual_length);
+		else {
+			/* 0x80 bit is error flag */
+			if ((data[0] & 0x80) == 0) {
+				/* no errors on individual bytes, only
+				   possible overrun err*/
+				if (data[0] & RXERROR_OVERRUN) {
+					tty_insert_flip_char(&port->port, 0,
+								TTY_OVERRUN);
+				}
+				for (i = 1; i < urb->actual_length ; ++i)
+					tty_insert_flip_char(&port->port,
+							data[i], TTY_NORMAL);
+			}  else {
+			/* some bytes had errors, every byte has status */
+				dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
+				for (i = 0; i + 1 < urb->actual_length; i += 2) {
+					int stat = data[i];
+					int flag = TTY_NORMAL;
+
+					if (stat & RXERROR_OVERRUN) {
+						tty_insert_flip_char(
+								&port->port, 0,
+								TTY_OVERRUN);
+					}
+					/* XXX should handle break (0x10) */
+					if (stat & RXERROR_PARITY)
+						flag = TTY_PARITY;
+					else if (stat & RXERROR_FRAMING)
+						flag = TTY_FRAME;
+
+					tty_insert_flip_char(&port->port,
+							data[i+1], flag);
+				}
+			}
+		}
+		tty_flip_buffer_push(&port->port);
+	}
+
+	/* Resubmit urb so we continue receiving */
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+}
+
+
+static void	usa90_instat_callback(struct urb *urb)
+{
+	unsigned char 				*data = urb->transfer_buffer;
+	struct keyspan_usa90_portStatusMessage	*msg;
+	struct usb_serial			*serial;
+	struct usb_serial_port			*port;
+	struct keyspan_port_private	 	*p_priv;
+	int old_dcd_state, err;
+	int status = urb->status;
+
+	serial =  urb->context;
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+				__func__, status);
+		return;
+	}
+	if (urb->actual_length < 14) {
+		dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length);
+		goto exit;
+	}
+
+	msg = (struct keyspan_usa90_portStatusMessage *)data;
+
+	/* Now do something useful with the data */
+
+	port = serial->port[0];
+	p_priv = usb_get_serial_port_data(port);
+	if (!p_priv)
+		goto resubmit;
+
+	/* Update handshaking pin state information */
+	old_dcd_state = p_priv->dcd_state;
+	p_priv->cts_state = ((msg->cts) ? 1 : 0);
+	p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
+	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
+	p_priv->ri_state = ((msg->ri) ? 1 : 0);
+
+	if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
+		tty_port_tty_hangup(&port->port, true);
+resubmit:
+	/* Resubmit urb so we continue receiving */
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+exit:
+	;
+}
+
+static void	usa90_outcont_callback(struct urb *urb)
+{
+	struct usb_serial_port *port;
+	struct keyspan_port_private *p_priv;
+
+	port =  urb->context;
+	p_priv = usb_get_serial_port_data(port);
+
+	if (p_priv->resend_cont) {
+		dev_dbg(&urb->dev->dev, "%s - sending setup\n", __func__);
+		keyspan_usa90_send_setup(port->serial, port,
+						p_priv->resend_cont - 1);
+	}
+}
+
+/* Status messages from the 28xg */
+static void	usa67_instat_callback(struct urb *urb)
+{
+	int					err;
+	unsigned char 				*data = urb->transfer_buffer;
+	struct keyspan_usa67_portStatusMessage	*msg;
+	struct usb_serial			*serial;
+	struct usb_serial_port			*port;
+	struct keyspan_port_private	 	*p_priv;
+	int old_dcd_state;
+	int status = urb->status;
+
+	serial = urb->context;
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+				__func__, status);
+		return;
+	}
+
+	if (urb->actual_length !=
+			sizeof(struct keyspan_usa67_portStatusMessage)) {
+		dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
+		return;
+	}
+
+
+	/* Now do something useful with the data */
+	msg = (struct keyspan_usa67_portStatusMessage *)data;
+
+	/* Check port number from message and retrieve private data */
+	if (msg->port >= serial->num_ports) {
+		dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
+		return;
+	}
+
+	port = serial->port[msg->port];
+	p_priv = usb_get_serial_port_data(port);
+	if (!p_priv)
+		goto resubmit;
+
+	/* Update handshaking pin state information */
+	old_dcd_state = p_priv->dcd_state;
+	p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
+	p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
+
+	if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
+		tty_port_tty_hangup(&port->port, true);
+resubmit:
+	/* Resubmit urb so we continue receiving */
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+}
+
+static void usa67_glocont_callback(struct urb *urb)
+{
+	struct usb_serial *serial;
+	struct usb_serial_port *port;
+	struct keyspan_port_private *p_priv;
+	int i;
+
+	serial = urb->context;
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		p_priv = usb_get_serial_port_data(port);
+		if (!p_priv)
+			continue;
+
+		if (p_priv->resend_cont) {
+			dev_dbg(&port->dev, "%s - sending setup\n", __func__);
+			keyspan_usa67_send_setup(serial, port,
+						p_priv->resend_cont - 1);
+			break;
+		}
+	}
+}
+
+static unsigned int keyspan_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct keyspan_port_private	*p_priv;
+	const struct keyspan_device_details	*d_details;
+	int				flip;
+	unsigned int			data_len;
+	struct urb			*this_urb;
+
+	p_priv = usb_get_serial_port_data(port);
+	d_details = p_priv->device_details;
+
+	/* FIXME: locking */
+	if (d_details->msg_format == msg_usa90)
+		data_len = 64;
+	else
+		data_len = 63;
+
+	flip = p_priv->out_flip;
+
+	/* Check both endpoints to see if any are available. */
+	this_urb = p_priv->out_urbs[flip];
+	if (this_urb != NULL) {
+		if (this_urb->status != -EINPROGRESS)
+			return data_len;
+		flip = (flip + 1) & d_details->outdat_endp_flip;
+		this_urb = p_priv->out_urbs[flip];
+		if (this_urb != NULL) {
+			if (this_urb->status != -EINPROGRESS)
+				return data_len;
+		}
+	}
+	return 0;
+}
+
+
+static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct keyspan_port_private 	*p_priv;
+	const struct keyspan_device_details	*d_details;
+	int				i, err;
+	int				baud_rate, device_port;
+	struct urb			*urb;
+	unsigned int			cflag = 0;
+
+	p_priv = usb_get_serial_port_data(port);
+	d_details = p_priv->device_details;
+
+	/* Set some sane defaults */
+	p_priv->rts_state = 1;
+	p_priv->dtr_state = 1;
+	p_priv->baud = 9600;
+
+	/* force baud and lcr to be set on open */
+	p_priv->old_baud = 0;
+	p_priv->old_cflag = 0;
+
+	p_priv->out_flip = 0;
+	p_priv->in_flip = 0;
+
+	/* Reset low level data toggle and start reading from endpoints */
+	for (i = 0; i < 2; i++) {
+		urb = p_priv->in_urbs[i];
+		if (urb == NULL)
+			continue;
+
+		/* make sure endpoint data toggle is synchronized
+		   with the device */
+		usb_clear_halt(urb->dev, urb->pipe);
+		err = usb_submit_urb(urb, GFP_KERNEL);
+		if (err != 0)
+			dev_dbg(&port->dev, "%s - submit urb %d failed (%d)\n", __func__, i, err);
+	}
+
+	/* Reset low level data toggle on out endpoints */
+	for (i = 0; i < 2; i++) {
+		urb = p_priv->out_urbs[i];
+		if (urb == NULL)
+			continue;
+		/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+						usb_pipeout(urb->pipe), 0); */
+	}
+
+	/* get the terminal config for the setup message now so we don't
+	 * need to send 2 of them */
+
+	device_port = port->port_number;
+	if (tty) {
+		cflag = tty->termios.c_cflag;
+		/* Baud rate calculation takes baud rate as an integer
+		   so other rates can be generated if desired. */
+		baud_rate = tty_get_baud_rate(tty);
+		/* If no match or invalid, leave as default */
+		if (baud_rate >= 0
+		    && d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk,
+					NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
+			p_priv->baud = baud_rate;
+		}
+	}
+	/* set CTS/RTS handshake etc. */
+	p_priv->cflag = cflag;
+	p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none;
+
+	keyspan_send_setup(port, 1);
+	/* mdelay(100); */
+	/* keyspan_set_termios(port, NULL); */
+
+	return 0;
+}
+
+static void keyspan_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
+
+	p_priv->rts_state = on;
+	p_priv->dtr_state = on;
+	keyspan_send_setup(port, 0);
+}
+
+static void keyspan_close(struct usb_serial_port *port)
+{
+	int			i;
+	struct keyspan_port_private 	*p_priv;
+
+	p_priv = usb_get_serial_port_data(port);
+
+	p_priv->rts_state = 0;
+	p_priv->dtr_state = 0;
+
+	keyspan_send_setup(port, 2);
+	/* pilot-xfer seems to work best with this delay */
+	mdelay(100);
+
+	p_priv->out_flip = 0;
+	p_priv->in_flip = 0;
+
+	usb_kill_urb(p_priv->inack_urb);
+	for (i = 0; i < 2; i++) {
+		usb_kill_urb(p_priv->in_urbs[i]);
+		usb_kill_urb(p_priv->out_urbs[i]);
+	}
+}
+
+/* download the firmware to a pre-renumeration device */
+static int keyspan_fake_startup(struct usb_serial *serial)
+{
+	char	*fw_name;
+
+	dev_dbg(&serial->dev->dev, "Keyspan startup version %04x product %04x\n",
+		le16_to_cpu(serial->dev->descriptor.bcdDevice),
+		le16_to_cpu(serial->dev->descriptor.idProduct));
+
+	if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000)
+								!= 0x8000) {
+		dev_dbg(&serial->dev->dev, "Firmware already loaded.  Quitting.\n");
+		return 1;
+	}
+
+		/* Select firmware image on the basis of idProduct */
+	switch (le16_to_cpu(serial->dev->descriptor.idProduct)) {
+	case keyspan_usa28_pre_product_id:
+		fw_name = "keyspan/usa28.fw";
+		break;
+
+	case keyspan_usa28x_pre_product_id:
+		fw_name = "keyspan/usa28x.fw";
+		break;
+
+	case keyspan_usa28xa_pre_product_id:
+		fw_name = "keyspan/usa28xa.fw";
+		break;
+
+	case keyspan_usa28xb_pre_product_id:
+		fw_name = "keyspan/usa28xb.fw";
+		break;
+
+	case keyspan_usa19_pre_product_id:
+		fw_name = "keyspan/usa19.fw";
+		break;
+
+	case keyspan_usa19qi_pre_product_id:
+		fw_name = "keyspan/usa19qi.fw";
+		break;
+
+	case keyspan_mpr_pre_product_id:
+		fw_name = "keyspan/mpr.fw";
+		break;
+
+	case keyspan_usa19qw_pre_product_id:
+		fw_name = "keyspan/usa19qw.fw";
+		break;
+
+	case keyspan_usa18x_pre_product_id:
+		fw_name = "keyspan/usa18x.fw";
+		break;
+
+	case keyspan_usa19w_pre_product_id:
+		fw_name = "keyspan/usa19w.fw";
+		break;
+
+	case keyspan_usa49w_pre_product_id:
+		fw_name = "keyspan/usa49w.fw";
+		break;
+
+	case keyspan_usa49wlc_pre_product_id:
+		fw_name = "keyspan/usa49wlc.fw";
+		break;
+
+	default:
+		dev_err(&serial->dev->dev, "Unknown product ID (%04x)\n",
+			le16_to_cpu(serial->dev->descriptor.idProduct));
+		return 1;
+	}
+
+	dev_dbg(&serial->dev->dev, "Uploading Keyspan %s firmware.\n", fw_name);
+
+	if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) {
+		dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n",
+			fw_name);
+		return -ENOENT;
+	}
+
+	/* after downloading firmware Renumeration will occur in a
+	  moment and the new device will bind to the real driver */
+
+	/* we don't want this device to have a driver assigned to it. */
+	return 1;
+}
+
+/* Helper functions used by keyspan_setup_urbs */
+static struct usb_endpoint_descriptor const *find_ep(struct usb_serial const *serial,
+						     int endpoint)
+{
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *ep;
+	int i;
+
+	iface_desc = serial->interface->cur_altsetting;
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+		ep = &iface_desc->endpoint[i].desc;
+		if (ep->bEndpointAddress == endpoint)
+			return ep;
+	}
+	dev_warn(&serial->interface->dev, "found no endpoint descriptor for endpoint %x\n",
+			endpoint);
+	return NULL;
+}
+
+static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint,
+				      int dir, void *ctx, char *buf, int len,
+				      void (*callback)(struct urb *))
+{
+	struct urb *urb;
+	struct usb_endpoint_descriptor const *ep_desc;
+	char const *ep_type_name;
+
+	if (endpoint == -1)
+		return NULL;		/* endpoint not needed */
+
+	dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %x\n",
+			__func__, endpoint);
+	urb = usb_alloc_urb(0, GFP_KERNEL);		/* No ISO */
+	if (!urb)
+		return NULL;
+
+	if (endpoint == 0) {
+		/* control EP filled in when used */
+		return urb;
+	}
+
+	ep_desc = find_ep(serial, endpoint);
+	if (!ep_desc) {
+		usb_free_urb(urb);
+		return NULL;
+	}
+	if (usb_endpoint_xfer_int(ep_desc)) {
+		ep_type_name = "INT";
+		usb_fill_int_urb(urb, serial->dev,
+				 usb_sndintpipe(serial->dev, endpoint) | dir,
+				 buf, len, callback, ctx,
+				 ep_desc->bInterval);
+	} else if (usb_endpoint_xfer_bulk(ep_desc)) {
+		ep_type_name = "BULK";
+		usb_fill_bulk_urb(urb, serial->dev,
+				  usb_sndbulkpipe(serial->dev, endpoint) | dir,
+				  buf, len, callback, ctx);
+	} else {
+		dev_warn(&serial->interface->dev,
+			 "unsupported endpoint type %x\n",
+			 usb_endpoint_type(ep_desc));
+		usb_free_urb(urb);
+		return NULL;
+	}
+
+	dev_dbg(&serial->interface->dev, "%s - using urb %p for %s endpoint %x\n",
+	    __func__, urb, ep_type_name, endpoint);
+	return urb;
+}
+
+static struct callbacks {
+	void	(*instat_callback)(struct urb *);
+	void	(*glocont_callback)(struct urb *);
+	void	(*indat_callback)(struct urb *);
+	void	(*outdat_callback)(struct urb *);
+	void	(*inack_callback)(struct urb *);
+	void	(*outcont_callback)(struct urb *);
+} keyspan_callbacks[] = {
+	{
+		/* msg_usa26 callbacks */
+		.instat_callback =	usa26_instat_callback,
+		.glocont_callback =	usa26_glocont_callback,
+		.indat_callback =	usa26_indat_callback,
+		.outdat_callback =	usa2x_outdat_callback,
+		.inack_callback =	usa26_inack_callback,
+		.outcont_callback =	usa26_outcont_callback,
+	}, {
+		/* msg_usa28 callbacks */
+		.instat_callback =	usa28_instat_callback,
+		.glocont_callback =	usa28_glocont_callback,
+		.indat_callback =	usa28_indat_callback,
+		.outdat_callback =	usa2x_outdat_callback,
+		.inack_callback =	usa28_inack_callback,
+		.outcont_callback =	usa28_outcont_callback,
+	}, {
+		/* msg_usa49 callbacks */
+		.instat_callback =	usa49_instat_callback,
+		.glocont_callback =	usa49_glocont_callback,
+		.indat_callback =	usa49_indat_callback,
+		.outdat_callback =	usa2x_outdat_callback,
+		.inack_callback =	usa49_inack_callback,
+		.outcont_callback =	usa49_outcont_callback,
+	}, {
+		/* msg_usa90 callbacks */
+		.instat_callback =	usa90_instat_callback,
+		.glocont_callback =	usa28_glocont_callback,
+		.indat_callback =	usa90_indat_callback,
+		.outdat_callback =	usa2x_outdat_callback,
+		.inack_callback =	usa28_inack_callback,
+		.outcont_callback =	usa90_outcont_callback,
+	}, {
+		/* msg_usa67 callbacks */
+		.instat_callback =	usa67_instat_callback,
+		.glocont_callback =	usa67_glocont_callback,
+		.indat_callback =	usa26_indat_callback,
+		.outdat_callback =	usa2x_outdat_callback,
+		.inack_callback =	usa26_inack_callback,
+		.outcont_callback =	usa26_outcont_callback,
+	}
+};
+
+	/* Generic setup urbs function that uses
+	   data in device_details */
+static void keyspan_setup_urbs(struct usb_serial *serial)
+{
+	struct keyspan_serial_private 	*s_priv;
+	const struct keyspan_device_details	*d_details;
+	struct callbacks		*cback;
+
+	s_priv = usb_get_serial_data(serial);
+	d_details = s_priv->device_details;
+
+	/* Setup values for the various callback routines */
+	cback = &keyspan_callbacks[d_details->msg_format];
+
+	/* Allocate and set up urbs for each one that is in use,
+	   starting with instat endpoints */
+	s_priv->instat_urb = keyspan_setup_urb
+		(serial, d_details->instat_endpoint, USB_DIR_IN,
+		 serial, s_priv->instat_buf, INSTAT_BUFLEN,
+		 cback->instat_callback);
+
+	s_priv->indat_urb = keyspan_setup_urb
+		(serial, d_details->indat_endpoint, USB_DIR_IN,
+		 serial, s_priv->indat_buf, INDAT49W_BUFLEN,
+		 usa49wg_indat_callback);
+
+	s_priv->glocont_urb = keyspan_setup_urb
+		(serial, d_details->glocont_endpoint, USB_DIR_OUT,
+		 serial, s_priv->glocont_buf, GLOCONT_BUFLEN,
+		 cback->glocont_callback);
+}
+
+/* usa19 function doesn't require prescaler */
+static int keyspan_usa19_calc_baud(struct usb_serial_port *port,
+				   u32 baud_rate, u32 baudclk, u8 *rate_hi,
+				   u8 *rate_low, u8 *prescaler, int portnum)
+{
+	u32 	b16,	/* baud rate times 16 (actual rate used internally) */
+		div,	/* divisor */
+		cnt;	/* inverse of divisor (programmed into 8051) */
+
+	dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
+
+	/* prevent divide by zero...  */
+	b16 = baud_rate * 16L;
+	if (b16 == 0)
+		return KEYSPAN_INVALID_BAUD_RATE;
+	/* Any "standard" rate over 57k6 is marginal on the USA-19
+	   as we run out of divisor resolution. */
+	if (baud_rate > 57600)
+		return KEYSPAN_INVALID_BAUD_RATE;
+
+	/* calculate the divisor and the counter (its inverse) */
+	div = baudclk / b16;
+	if (div == 0)
+		return KEYSPAN_INVALID_BAUD_RATE;
+	else
+		cnt = 0 - div;
+
+	if (div > 0xffff)
+		return KEYSPAN_INVALID_BAUD_RATE;
+
+	/* return the counter values if non-null */
+	if (rate_low)
+		*rate_low = (u8) (cnt & 0xff);
+	if (rate_hi)
+		*rate_hi = (u8) ((cnt >> 8) & 0xff);
+	if (rate_low && rate_hi)
+		dev_dbg(&port->dev, "%s - %d %02x %02x.\n",
+				__func__, baud_rate, *rate_hi, *rate_low);
+	return KEYSPAN_BAUD_RATE_OK;
+}
+
+/* usa19hs function doesn't require prescaler */
+static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port,
+				     u32 baud_rate, u32 baudclk, u8 *rate_hi,
+				     u8 *rate_low, u8 *prescaler, int portnum)
+{
+	u32 	b16,	/* baud rate times 16 (actual rate used internally) */
+			div;	/* divisor */
+
+	dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
+
+	/* prevent divide by zero...  */
+	b16 = baud_rate * 16L;
+	if (b16 == 0)
+		return KEYSPAN_INVALID_BAUD_RATE;
+
+	/* calculate the divisor */
+	div = baudclk / b16;
+	if (div == 0)
+		return KEYSPAN_INVALID_BAUD_RATE;
+
+	if (div > 0xffff)
+		return KEYSPAN_INVALID_BAUD_RATE;
+
+	/* return the counter values if non-null */
+	if (rate_low)
+		*rate_low = (u8) (div & 0xff);
+
+	if (rate_hi)
+		*rate_hi = (u8) ((div >> 8) & 0xff);
+
+	if (rate_low && rate_hi)
+		dev_dbg(&port->dev, "%s - %d %02x %02x.\n",
+			__func__, baud_rate, *rate_hi, *rate_low);
+
+	return KEYSPAN_BAUD_RATE_OK;
+}
+
+static int keyspan_usa19w_calc_baud(struct usb_serial_port *port,
+				    u32 baud_rate, u32 baudclk, u8 *rate_hi,
+				    u8 *rate_low, u8 *prescaler, int portnum)
+{
+	u32 	b16,	/* baud rate times 16 (actual rate used internally) */
+		clk,	/* clock with 13/8 prescaler */
+		div,	/* divisor using 13/8 prescaler */
+		res,	/* resulting baud rate using 13/8 prescaler */
+		diff,	/* error using 13/8 prescaler */
+		smallest_diff;
+	u8	best_prescaler;
+	int	i;
+
+	dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
+
+	/* prevent divide by zero */
+	b16 = baud_rate * 16L;
+	if (b16 == 0)
+		return KEYSPAN_INVALID_BAUD_RATE;
+
+	/* Calculate prescaler by trying them all and looking
+	   for best fit */
+
+	/* start with largest possible difference */
+	smallest_diff = 0xffffffff;
+
+		/* 0 is an invalid prescaler, used as a flag */
+	best_prescaler = 0;
+
+	for (i = 8; i <= 0xff; ++i) {
+		clk = (baudclk * 8) / (u32) i;
+
+		div = clk / b16;
+		if (div == 0)
+			continue;
+
+		res = clk / div;
+		diff = (res > b16) ? (res-b16) : (b16-res);
+
+		if (diff < smallest_diff) {
+			best_prescaler = i;
+			smallest_diff = diff;
+		}
+	}
+
+	if (best_prescaler == 0)
+		return KEYSPAN_INVALID_BAUD_RATE;
+
+	clk = (baudclk * 8) / (u32) best_prescaler;
+	div = clk / b16;
+
+	/* return the divisor and prescaler if non-null */
+	if (rate_low)
+		*rate_low = (u8) (div & 0xff);
+	if (rate_hi)
+		*rate_hi = (u8) ((div >> 8) & 0xff);
+	if (prescaler) {
+		*prescaler = best_prescaler;
+		/*  dev_dbg(&port->dev, "%s - %d %d\n", __func__, *prescaler, div); */
+	}
+	return KEYSPAN_BAUD_RATE_OK;
+}
+
+	/* USA-28 supports different maximum baud rates on each port */
+static int keyspan_usa28_calc_baud(struct usb_serial_port *port,
+				   u32 baud_rate, u32 baudclk, u8 *rate_hi,
+				   u8 *rate_low, u8 *prescaler, int portnum)
+{
+	u32 	b16,	/* baud rate times 16 (actual rate used internally) */
+		div,	/* divisor */
+		cnt;	/* inverse of divisor (programmed into 8051) */
+
+	dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
+
+		/* prevent divide by zero */
+	b16 = baud_rate * 16L;
+	if (b16 == 0)
+		return KEYSPAN_INVALID_BAUD_RATE;
+
+	/* calculate the divisor and the counter (its inverse) */
+	div = KEYSPAN_USA28_BAUDCLK / b16;
+	if (div == 0)
+		return KEYSPAN_INVALID_BAUD_RATE;
+	else
+		cnt = 0 - div;
+
+	/* check for out of range, based on portnum,
+	   and return result */
+	if (portnum == 0) {
+		if (div > 0xffff)
+			return KEYSPAN_INVALID_BAUD_RATE;
+	} else {
+		if (portnum == 1) {
+			if (div > 0xff)
+				return KEYSPAN_INVALID_BAUD_RATE;
+		} else
+			return KEYSPAN_INVALID_BAUD_RATE;
+	}
+
+		/* return the counter values if not NULL
+		   (port 1 will ignore retHi) */
+	if (rate_low)
+		*rate_low = (u8) (cnt & 0xff);
+	if (rate_hi)
+		*rate_hi = (u8) ((cnt >> 8) & 0xff);
+	dev_dbg(&port->dev, "%s - %d OK.\n", __func__, baud_rate);
+	return KEYSPAN_BAUD_RATE_OK;
+}
+
+static int keyspan_usa26_send_setup(struct usb_serial *serial,
+				    struct usb_serial_port *port,
+				    int reset_port)
+{
+	struct keyspan_usa26_portControlMessage	msg;
+	struct keyspan_serial_private 		*s_priv;
+	struct keyspan_port_private 		*p_priv;
+	const struct keyspan_device_details	*d_details;
+	struct urb				*this_urb;
+	int 					device_port, err;
+
+	dev_dbg(&port->dev, "%s reset=%d\n", __func__, reset_port);
+
+	s_priv = usb_get_serial_data(serial);
+	p_priv = usb_get_serial_port_data(port);
+	d_details = s_priv->device_details;
+	device_port = port->port_number;
+
+	this_urb = p_priv->outcont_urb;
+
+		/* Make sure we have an urb then send the message */
+	if (this_urb == NULL) {
+		dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
+		return -1;
+	}
+
+	dev_dbg(&port->dev, "%s - endpoint %x\n",
+			__func__, usb_pipeendpoint(this_urb->pipe));
+
+	/* Save reset port val for resend.
+	   Don't overwrite resend for open/close condition. */
+	if ((reset_port + 1) > p_priv->resend_cont)
+		p_priv->resend_cont = reset_port + 1;
+	if (this_urb->status == -EINPROGRESS) {
+		/*  dev_dbg(&port->dev, "%s - already writing\n", __func__); */
+		mdelay(5);
+		return -1;
+	}
+
+	memset(&msg, 0, sizeof(struct keyspan_usa26_portControlMessage));
+
+	/* Only set baud rate if it's changed */
+	if (p_priv->old_baud != p_priv->baud) {
+		p_priv->old_baud = p_priv->baud;
+		msg.setClocking = 0xff;
+		if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+						   &msg.baudHi, &msg.baudLo, &msg.prescaler,
+						   device_port) == KEYSPAN_INVALID_BAUD_RATE) {
+			dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
+				__func__, p_priv->baud);
+			msg.baudLo = 0;
+			msg.baudHi = 125;	/* Values for 9600 baud */
+			msg.prescaler = 10;
+		}
+		msg.setPrescaler = 0xff;
+	}
+
+	msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
+	switch (p_priv->cflag & CSIZE) {
+	case CS5:
+		msg.lcr |= USA_DATABITS_5;
+		break;
+	case CS6:
+		msg.lcr |= USA_DATABITS_6;
+		break;
+	case CS7:
+		msg.lcr |= USA_DATABITS_7;
+		break;
+	case CS8:
+		msg.lcr |= USA_DATABITS_8;
+		break;
+	}
+	if (p_priv->cflag & PARENB) {
+		/* note USA_PARITY_NONE == 0 */
+		msg.lcr |= (p_priv->cflag & PARODD) ?
+			USA_PARITY_ODD : USA_PARITY_EVEN;
+	}
+	msg.setLcr = 0xff;
+
+	msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
+	msg.xonFlowControl = 0;
+	msg.setFlowControl = 0xff;
+	msg.forwardingLength = 16;
+	msg.xonChar = 17;
+	msg.xoffChar = 19;
+
+	/* Opening port */
+	if (reset_port == 1) {
+		msg._txOn = 1;
+		msg._txOff = 0;
+		msg.txFlush = 0;
+		msg.txBreak = 0;
+		msg.rxOn = 1;
+		msg.rxOff = 0;
+		msg.rxFlush = 1;
+		msg.rxForward = 0;
+		msg.returnStatus = 0;
+		msg.resetDataToggle = 0xff;
+	}
+
+	/* Closing port */
+	else if (reset_port == 2) {
+		msg._txOn = 0;
+		msg._txOff = 1;
+		msg.txFlush = 0;
+		msg.txBreak = 0;
+		msg.rxOn = 0;
+		msg.rxOff = 1;
+		msg.rxFlush = 1;
+		msg.rxForward = 0;
+		msg.returnStatus = 0;
+		msg.resetDataToggle = 0;
+	}
+
+	/* Sending intermediate configs */
+	else {
+		msg._txOn = (!p_priv->break_on);
+		msg._txOff = 0;
+		msg.txFlush = 0;
+		msg.txBreak = (p_priv->break_on);
+		msg.rxOn = 0;
+		msg.rxOff = 0;
+		msg.rxFlush = 0;
+		msg.rxForward = 0;
+		msg.returnStatus = 0;
+		msg.resetDataToggle = 0x0;
+	}
+
+	/* Do handshaking outputs */
+	msg.setTxTriState_setRts = 0xff;
+	msg.txTriState_rts = p_priv->rts_state;
+
+	msg.setHskoa_setDtr = 0xff;
+	msg.hskoa_dtr = p_priv->dtr_state;
+
+	p_priv->resend_cont = 0;
+	memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
+
+	/* send the data out the device on control endpoint */
+	this_urb->transfer_buffer_length = sizeof(msg);
+
+	err = usb_submit_urb(this_urb, GFP_ATOMIC);
+	if (err != 0)
+		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
+	return 0;
+}
+
+static int keyspan_usa28_send_setup(struct usb_serial *serial,
+				    struct usb_serial_port *port,
+				    int reset_port)
+{
+	struct keyspan_usa28_portControlMessage	msg;
+	struct keyspan_serial_private	 	*s_priv;
+	struct keyspan_port_private 		*p_priv;
+	const struct keyspan_device_details	*d_details;
+	struct urb				*this_urb;
+	int 					device_port, err;
+
+	s_priv = usb_get_serial_data(serial);
+	p_priv = usb_get_serial_port_data(port);
+	d_details = s_priv->device_details;
+	device_port = port->port_number;
+
+	/* only do something if we have a bulk out endpoint */
+	this_urb = p_priv->outcont_urb;
+	if (this_urb == NULL) {
+		dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
+		return -1;
+	}
+
+	/* Save reset port val for resend.
+	   Don't overwrite resend for open/close condition. */
+	if ((reset_port + 1) > p_priv->resend_cont)
+		p_priv->resend_cont = reset_port + 1;
+	if (this_urb->status == -EINPROGRESS) {
+		dev_dbg(&port->dev, "%s already writing\n", __func__);
+		mdelay(5);
+		return -1;
+	}
+
+	memset(&msg, 0, sizeof(struct keyspan_usa28_portControlMessage));
+
+	msg.setBaudRate = 1;
+	if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+					   &msg.baudHi, &msg.baudLo, NULL,
+					   device_port) == KEYSPAN_INVALID_BAUD_RATE) {
+		dev_dbg(&port->dev, "%s - Invalid baud rate requested %d.\n",
+						__func__, p_priv->baud);
+		msg.baudLo = 0xff;
+		msg.baudHi = 0xb2;	/* Values for 9600 baud */
+	}
+
+	/* If parity is enabled, we must calculate it ourselves. */
+	msg.parity = 0;		/* XXX for now */
+
+	msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
+	msg.xonFlowControl = 0;
+
+	/* Do handshaking outputs, DTR is inverted relative to RTS */
+	msg.rts = p_priv->rts_state;
+	msg.dtr = p_priv->dtr_state;
+
+	msg.forwardingLength = 16;
+	msg.forwardMs = 10;
+	msg.breakThreshold = 45;
+	msg.xonChar = 17;
+	msg.xoffChar = 19;
+
+	/*msg.returnStatus = 1;
+	msg.resetDataToggle = 0xff;*/
+	/* Opening port */
+	if (reset_port == 1) {
+		msg._txOn = 1;
+		msg._txOff = 0;
+		msg.txFlush = 0;
+		msg.txForceXoff = 0;
+		msg.txBreak = 0;
+		msg.rxOn = 1;
+		msg.rxOff = 0;
+		msg.rxFlush = 1;
+		msg.rxForward = 0;
+		msg.returnStatus = 0;
+		msg.resetDataToggle = 0xff;
+	}
+	/* Closing port */
+	else if (reset_port == 2) {
+		msg._txOn = 0;
+		msg._txOff = 1;
+		msg.txFlush = 0;
+		msg.txForceXoff = 0;
+		msg.txBreak = 0;
+		msg.rxOn = 0;
+		msg.rxOff = 1;
+		msg.rxFlush = 1;
+		msg.rxForward = 0;
+		msg.returnStatus = 0;
+		msg.resetDataToggle = 0;
+	}
+	/* Sending intermediate configs */
+	else {
+		msg._txOn = (!p_priv->break_on);
+		msg._txOff = 0;
+		msg.txFlush = 0;
+		msg.txForceXoff = 0;
+		msg.txBreak = (p_priv->break_on);
+		msg.rxOn = 0;
+		msg.rxOff = 0;
+		msg.rxFlush = 0;
+		msg.rxForward = 0;
+		msg.returnStatus = 0;
+		msg.resetDataToggle = 0x0;
+	}
+
+	p_priv->resend_cont = 0;
+	memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
+
+	/* send the data out the device on control endpoint */
+	this_urb->transfer_buffer_length = sizeof(msg);
+
+	err = usb_submit_urb(this_urb, GFP_ATOMIC);
+	if (err != 0)
+		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed\n", __func__);
+
+	return 0;
+}
+
+static int keyspan_usa49_send_setup(struct usb_serial *serial,
+				    struct usb_serial_port *port,
+				    int reset_port)
+{
+	struct keyspan_usa49_portControlMessage	msg;
+	struct usb_ctrlrequest 			*dr = NULL;
+	struct keyspan_serial_private 		*s_priv;
+	struct keyspan_port_private 		*p_priv;
+	const struct keyspan_device_details	*d_details;
+	struct urb				*this_urb;
+	int 					err, device_port;
+
+	s_priv = usb_get_serial_data(serial);
+	p_priv = usb_get_serial_port_data(port);
+	d_details = s_priv->device_details;
+
+	this_urb = s_priv->glocont_urb;
+
+	/* Work out which port within the device is being setup */
+	device_port = port->port_number;
+
+	/* Make sure we have an urb then send the message */
+	if (this_urb == NULL) {
+		dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__);
+		return -1;
+	}
+
+	dev_dbg(&port->dev, "%s - endpoint %x (%d)\n",
+		__func__, usb_pipeendpoint(this_urb->pipe), device_port);
+
+	/* Save reset port val for resend.
+	   Don't overwrite resend for open/close condition. */
+	if ((reset_port + 1) > p_priv->resend_cont)
+		p_priv->resend_cont = reset_port + 1;
+
+	if (this_urb->status == -EINPROGRESS) {
+		/*  dev_dbg(&port->dev, "%s - already writing\n", __func__); */
+		mdelay(5);
+		return -1;
+	}
+
+	memset(&msg, 0, sizeof(struct keyspan_usa49_portControlMessage));
+
+	msg.portNumber = device_port;
+
+	/* Only set baud rate if it's changed */
+	if (p_priv->old_baud != p_priv->baud) {
+		p_priv->old_baud = p_priv->baud;
+		msg.setClocking = 0xff;
+		if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+						   &msg.baudHi, &msg.baudLo, &msg.prescaler,
+						   device_port) == KEYSPAN_INVALID_BAUD_RATE) {
+			dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
+				__func__, p_priv->baud);
+			msg.baudLo = 0;
+			msg.baudHi = 125;	/* Values for 9600 baud */
+			msg.prescaler = 10;
+		}
+		/* msg.setPrescaler = 0xff; */
+	}
+
+	msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
+	switch (p_priv->cflag & CSIZE) {
+	case CS5:
+		msg.lcr |= USA_DATABITS_5;
+		break;
+	case CS6:
+		msg.lcr |= USA_DATABITS_6;
+		break;
+	case CS7:
+		msg.lcr |= USA_DATABITS_7;
+		break;
+	case CS8:
+		msg.lcr |= USA_DATABITS_8;
+		break;
+	}
+	if (p_priv->cflag & PARENB) {
+		/* note USA_PARITY_NONE == 0 */
+		msg.lcr |= (p_priv->cflag & PARODD) ?
+			USA_PARITY_ODD : USA_PARITY_EVEN;
+	}
+	msg.setLcr = 0xff;
+
+	msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
+	msg.xonFlowControl = 0;
+	msg.setFlowControl = 0xff;
+
+	msg.forwardingLength = 16;
+	msg.xonChar = 17;
+	msg.xoffChar = 19;
+
+	/* Opening port */
+	if (reset_port == 1) {
+		msg._txOn = 1;
+		msg._txOff = 0;
+		msg.txFlush = 0;
+		msg.txBreak = 0;
+		msg.rxOn = 1;
+		msg.rxOff = 0;
+		msg.rxFlush = 1;
+		msg.rxForward = 0;
+		msg.returnStatus = 0;
+		msg.resetDataToggle = 0xff;
+		msg.enablePort = 1;
+		msg.disablePort = 0;
+	}
+	/* Closing port */
+	else if (reset_port == 2) {
+		msg._txOn = 0;
+		msg._txOff = 1;
+		msg.txFlush = 0;
+		msg.txBreak = 0;
+		msg.rxOn = 0;
+		msg.rxOff = 1;
+		msg.rxFlush = 1;
+		msg.rxForward = 0;
+		msg.returnStatus = 0;
+		msg.resetDataToggle = 0;
+		msg.enablePort = 0;
+		msg.disablePort = 1;
+	}
+	/* Sending intermediate configs */
+	else {
+		msg._txOn = (!p_priv->break_on);
+		msg._txOff = 0;
+		msg.txFlush = 0;
+		msg.txBreak = (p_priv->break_on);
+		msg.rxOn = 0;
+		msg.rxOff = 0;
+		msg.rxFlush = 0;
+		msg.rxForward = 0;
+		msg.returnStatus = 0;
+		msg.resetDataToggle = 0x0;
+		msg.enablePort = 0;
+		msg.disablePort = 0;
+	}
+
+	/* Do handshaking outputs */
+	msg.setRts = 0xff;
+	msg.rts = p_priv->rts_state;
+
+	msg.setDtr = 0xff;
+	msg.dtr = p_priv->dtr_state;
+
+	p_priv->resend_cont = 0;
+
+	/* if the device is a 49wg, we send control message on usb
+	   control EP 0 */
+
+	if (d_details->product_id == keyspan_usa49wg_product_id) {
+		dr = (void *)(s_priv->ctrl_buf);
+		dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT;
+		dr->bRequest = 0xB0;	/* 49wg control message */
+		dr->wValue = 0;
+		dr->wIndex = 0;
+		dr->wLength = cpu_to_le16(sizeof(msg));
+
+		memcpy(s_priv->glocont_buf, &msg, sizeof(msg));
+
+		usb_fill_control_urb(this_urb, serial->dev,
+				usb_sndctrlpipe(serial->dev, 0),
+				(unsigned char *)dr, s_priv->glocont_buf,
+				sizeof(msg), usa49_glocont_callback, serial);
+
+	} else {
+		memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
+
+		/* send the data out the device on control endpoint */
+		this_urb->transfer_buffer_length = sizeof(msg);
+	}
+	err = usb_submit_urb(this_urb, GFP_ATOMIC);
+	if (err != 0)
+		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
+
+	return 0;
+}
+
+static int keyspan_usa90_send_setup(struct usb_serial *serial,
+				    struct usb_serial_port *port,
+				    int reset_port)
+{
+	struct keyspan_usa90_portControlMessage	msg;
+	struct keyspan_serial_private 		*s_priv;
+	struct keyspan_port_private 		*p_priv;
+	const struct keyspan_device_details	*d_details;
+	struct urb				*this_urb;
+	int 					err;
+	u8						prescaler;
+
+	s_priv = usb_get_serial_data(serial);
+	p_priv = usb_get_serial_port_data(port);
+	d_details = s_priv->device_details;
+
+	/* only do something if we have a bulk out endpoint */
+	this_urb = p_priv->outcont_urb;
+	if (this_urb == NULL) {
+		dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
+		return -1;
+	}
+
+	/* Save reset port val for resend.
+	   Don't overwrite resend for open/close condition. */
+	if ((reset_port + 1) > p_priv->resend_cont)
+		p_priv->resend_cont = reset_port + 1;
+	if (this_urb->status == -EINPROGRESS) {
+		dev_dbg(&port->dev, "%s already writing\n", __func__);
+		mdelay(5);
+		return -1;
+	}
+
+	memset(&msg, 0, sizeof(struct keyspan_usa90_portControlMessage));
+
+	/* Only set baud rate if it's changed */
+	if (p_priv->old_baud != p_priv->baud) {
+		p_priv->old_baud = p_priv->baud;
+		msg.setClocking = 0x01;
+		if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+						   &msg.baudHi, &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) {
+			dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
+				__func__, p_priv->baud);
+			p_priv->baud = 9600;
+			d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+				&msg.baudHi, &msg.baudLo, &prescaler, 0);
+		}
+		msg.setRxMode = 1;
+		msg.setTxMode = 1;
+	}
+
+	/* modes must always be correctly specified */
+	if (p_priv->baud > 57600) {
+		msg.rxMode = RXMODE_DMA;
+		msg.txMode = TXMODE_DMA;
+	} else {
+		msg.rxMode = RXMODE_BYHAND;
+		msg.txMode = TXMODE_BYHAND;
+	}
+
+	msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
+	switch (p_priv->cflag & CSIZE) {
+	case CS5:
+		msg.lcr |= USA_DATABITS_5;
+		break;
+	case CS6:
+		msg.lcr |= USA_DATABITS_6;
+		break;
+	case CS7:
+		msg.lcr |= USA_DATABITS_7;
+		break;
+	case CS8:
+		msg.lcr |= USA_DATABITS_8;
+		break;
+	}
+	if (p_priv->cflag & PARENB) {
+		/* note USA_PARITY_NONE == 0 */
+		msg.lcr |= (p_priv->cflag & PARODD) ?
+			USA_PARITY_ODD : USA_PARITY_EVEN;
+	}
+	if (p_priv->old_cflag != p_priv->cflag) {
+		p_priv->old_cflag = p_priv->cflag;
+		msg.setLcr = 0x01;
+	}
+
+	if (p_priv->flow_control == flow_cts)
+		msg.txFlowControl = TXFLOW_CTS;
+	msg.setTxFlowControl = 0x01;
+	msg.setRxFlowControl = 0x01;
+
+	msg.rxForwardingLength = 16;
+	msg.rxForwardingTimeout = 16;
+	msg.txAckSetting = 0;
+	msg.xonChar = 17;
+	msg.xoffChar = 19;
+
+	/* Opening port */
+	if (reset_port == 1) {
+		msg.portEnabled = 1;
+		msg.rxFlush = 1;
+		msg.txBreak = (p_priv->break_on);
+	}
+	/* Closing port */
+	else if (reset_port == 2)
+		msg.portEnabled = 0;
+	/* Sending intermediate configs */
+	else {
+		msg.portEnabled = 1;
+		msg.txBreak = (p_priv->break_on);
+	}
+
+	/* Do handshaking outputs */
+	msg.setRts = 0x01;
+	msg.rts = p_priv->rts_state;
+
+	msg.setDtr = 0x01;
+	msg.dtr = p_priv->dtr_state;
+
+	p_priv->resend_cont = 0;
+	memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
+
+	/* send the data out the device on control endpoint */
+	this_urb->transfer_buffer_length = sizeof(msg);
+
+	err = usb_submit_urb(this_urb, GFP_ATOMIC);
+	if (err != 0)
+		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
+	return 0;
+}
+
+static int keyspan_usa67_send_setup(struct usb_serial *serial,
+				    struct usb_serial_port *port,
+				    int reset_port)
+{
+	struct keyspan_usa67_portControlMessage	msg;
+	struct keyspan_serial_private 		*s_priv;
+	struct keyspan_port_private 		*p_priv;
+	const struct keyspan_device_details	*d_details;
+	struct urb				*this_urb;
+	int 					err, device_port;
+
+	s_priv = usb_get_serial_data(serial);
+	p_priv = usb_get_serial_port_data(port);
+	d_details = s_priv->device_details;
+
+	this_urb = s_priv->glocont_urb;
+
+	/* Work out which port within the device is being setup */
+	device_port = port->port_number;
+
+	/* Make sure we have an urb then send the message */
+	if (this_urb == NULL) {
+		dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__);
+		return -1;
+	}
+
+	/* Save reset port val for resend.
+	   Don't overwrite resend for open/close condition. */
+	if ((reset_port + 1) > p_priv->resend_cont)
+		p_priv->resend_cont = reset_port + 1;
+	if (this_urb->status == -EINPROGRESS) {
+		/*  dev_dbg(&port->dev, "%s - already writing\n", __func__); */
+		mdelay(5);
+		return -1;
+	}
+
+	memset(&msg, 0, sizeof(struct keyspan_usa67_portControlMessage));
+
+	msg.port = device_port;
+
+	/* Only set baud rate if it's changed */
+	if (p_priv->old_baud != p_priv->baud) {
+		p_priv->old_baud = p_priv->baud;
+		msg.setClocking = 0xff;
+		if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+						   &msg.baudHi, &msg.baudLo, &msg.prescaler,
+						   device_port) == KEYSPAN_INVALID_BAUD_RATE) {
+			dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
+				__func__, p_priv->baud);
+			msg.baudLo = 0;
+			msg.baudHi = 125;	/* Values for 9600 baud */
+			msg.prescaler = 10;
+		}
+		msg.setPrescaler = 0xff;
+	}
+
+	msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
+	switch (p_priv->cflag & CSIZE) {
+	case CS5:
+		msg.lcr |= USA_DATABITS_5;
+		break;
+	case CS6:
+		msg.lcr |= USA_DATABITS_6;
+		break;
+	case CS7:
+		msg.lcr |= USA_DATABITS_7;
+		break;
+	case CS8:
+		msg.lcr |= USA_DATABITS_8;
+		break;
+	}
+	if (p_priv->cflag & PARENB) {
+		/* note USA_PARITY_NONE == 0 */
+		msg.lcr |= (p_priv->cflag & PARODD) ?
+					USA_PARITY_ODD : USA_PARITY_EVEN;
+	}
+	msg.setLcr = 0xff;
+
+	msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
+	msg.xonFlowControl = 0;
+	msg.setFlowControl = 0xff;
+	msg.forwardingLength = 16;
+	msg.xonChar = 17;
+	msg.xoffChar = 19;
+
+	if (reset_port == 1) {
+		/* Opening port */
+		msg._txOn = 1;
+		msg._txOff = 0;
+		msg.txFlush = 0;
+		msg.txBreak = 0;
+		msg.rxOn = 1;
+		msg.rxOff = 0;
+		msg.rxFlush = 1;
+		msg.rxForward = 0;
+		msg.returnStatus = 0;
+		msg.resetDataToggle = 0xff;
+	} else if (reset_port == 2) {
+		/* Closing port */
+		msg._txOn = 0;
+		msg._txOff = 1;
+		msg.txFlush = 0;
+		msg.txBreak = 0;
+		msg.rxOn = 0;
+		msg.rxOff = 1;
+		msg.rxFlush = 1;
+		msg.rxForward = 0;
+		msg.returnStatus = 0;
+		msg.resetDataToggle = 0;
+	} else {
+		/* Sending intermediate configs */
+		msg._txOn = (!p_priv->break_on);
+		msg._txOff = 0;
+		msg.txFlush = 0;
+		msg.txBreak = (p_priv->break_on);
+		msg.rxOn = 0;
+		msg.rxOff = 0;
+		msg.rxFlush = 0;
+		msg.rxForward = 0;
+		msg.returnStatus = 0;
+		msg.resetDataToggle = 0x0;
+	}
+
+	/* Do handshaking outputs */
+	msg.setTxTriState_setRts = 0xff;
+	msg.txTriState_rts = p_priv->rts_state;
+
+	msg.setHskoa_setDtr = 0xff;
+	msg.hskoa_dtr = p_priv->dtr_state;
+
+	p_priv->resend_cont = 0;
+
+	memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
+
+	/* send the data out the device on control endpoint */
+	this_urb->transfer_buffer_length = sizeof(msg);
+
+	err = usb_submit_urb(this_urb, GFP_ATOMIC);
+	if (err != 0)
+		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
+	return 0;
+}
+
+static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
+{
+	struct usb_serial *serial = port->serial;
+	struct keyspan_serial_private *s_priv;
+	const struct keyspan_device_details *d_details;
+
+	s_priv = usb_get_serial_data(serial);
+	d_details = s_priv->device_details;
+
+	switch (d_details->msg_format) {
+	case msg_usa26:
+		keyspan_usa26_send_setup(serial, port, reset_port);
+		break;
+	case msg_usa28:
+		keyspan_usa28_send_setup(serial, port, reset_port);
+		break;
+	case msg_usa49:
+		keyspan_usa49_send_setup(serial, port, reset_port);
+		break;
+	case msg_usa90:
+		keyspan_usa90_send_setup(serial, port, reset_port);
+		break;
+	case msg_usa67:
+		keyspan_usa67_send_setup(serial, port, reset_port);
+		break;
+	}
+}
+
+
+/* Gets called by the "real" driver (ie once firmware is loaded
+   and renumeration has taken place. */
+static int keyspan_startup(struct usb_serial *serial)
+{
+	int				i, err;
+	struct keyspan_serial_private 	*s_priv;
+	const struct keyspan_device_details	*d_details;
+
+	for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i)
+		if (d_details->product_id ==
+				le16_to_cpu(serial->dev->descriptor.idProduct))
+			break;
+	if (d_details == NULL) {
+		dev_err(&serial->dev->dev, "%s - unknown product id %x\n",
+		    __func__, le16_to_cpu(serial->dev->descriptor.idProduct));
+		return -ENODEV;
+	}
+
+	/* Setup private data for serial driver */
+	s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL);
+	if (!s_priv)
+		return -ENOMEM;
+
+	s_priv->instat_buf = kzalloc(INSTAT_BUFLEN, GFP_KERNEL);
+	if (!s_priv->instat_buf)
+		goto err_instat_buf;
+
+	s_priv->indat_buf = kzalloc(INDAT49W_BUFLEN, GFP_KERNEL);
+	if (!s_priv->indat_buf)
+		goto err_indat_buf;
+
+	s_priv->glocont_buf = kzalloc(GLOCONT_BUFLEN, GFP_KERNEL);
+	if (!s_priv->glocont_buf)
+		goto err_glocont_buf;
+
+	s_priv->ctrl_buf = kzalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+	if (!s_priv->ctrl_buf)
+		goto err_ctrl_buf;
+
+	s_priv->device_details = d_details;
+	usb_set_serial_data(serial, s_priv);
+
+	keyspan_setup_urbs(serial);
+
+	if (s_priv->instat_urb != NULL) {
+		err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL);
+		if (err != 0)
+			dev_dbg(&serial->dev->dev, "%s - submit instat urb failed %d\n", __func__, err);
+	}
+	if (s_priv->indat_urb != NULL) {
+		err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL);
+		if (err != 0)
+			dev_dbg(&serial->dev->dev, "%s - submit indat urb failed %d\n", __func__, err);
+	}
+
+	return 0;
+
+err_ctrl_buf:
+	kfree(s_priv->glocont_buf);
+err_glocont_buf:
+	kfree(s_priv->indat_buf);
+err_indat_buf:
+	kfree(s_priv->instat_buf);
+err_instat_buf:
+	kfree(s_priv);
+
+	return -ENOMEM;
+}
+
+static void keyspan_disconnect(struct usb_serial *serial)
+{
+	struct keyspan_serial_private *s_priv;
+
+	s_priv = usb_get_serial_data(serial);
+
+	usb_kill_urb(s_priv->instat_urb);
+	usb_kill_urb(s_priv->glocont_urb);
+	usb_kill_urb(s_priv->indat_urb);
+}
+
+static void keyspan_release(struct usb_serial *serial)
+{
+	struct keyspan_serial_private *s_priv;
+
+	s_priv = usb_get_serial_data(serial);
+
+	/* Make sure to unlink the URBs submitted in attach. */
+	usb_kill_urb(s_priv->instat_urb);
+	usb_kill_urb(s_priv->indat_urb);
+
+	usb_free_urb(s_priv->instat_urb);
+	usb_free_urb(s_priv->indat_urb);
+	usb_free_urb(s_priv->glocont_urb);
+
+	kfree(s_priv->ctrl_buf);
+	kfree(s_priv->glocont_buf);
+	kfree(s_priv->indat_buf);
+	kfree(s_priv->instat_buf);
+
+	kfree(s_priv);
+}
+
+static int keyspan_port_probe(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct keyspan_serial_private *s_priv;
+	struct keyspan_port_private *p_priv;
+	const struct keyspan_device_details *d_details;
+	struct callbacks *cback;
+	int endp;
+	int port_num;
+	int i;
+
+	s_priv = usb_get_serial_data(serial);
+	d_details = s_priv->device_details;
+
+	p_priv = kzalloc(sizeof(*p_priv), GFP_KERNEL);
+	if (!p_priv)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) {
+		p_priv->in_buffer[i] = kzalloc(IN_BUFLEN, GFP_KERNEL);
+		if (!p_priv->in_buffer[i])
+			goto err_free_in_buffer;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) {
+		p_priv->out_buffer[i] = kzalloc(OUT_BUFLEN, GFP_KERNEL);
+		if (!p_priv->out_buffer[i])
+			goto err_free_out_buffer;
+	}
+
+	p_priv->inack_buffer = kzalloc(INACK_BUFLEN, GFP_KERNEL);
+	if (!p_priv->inack_buffer)
+		goto err_free_out_buffer;
+
+	p_priv->outcont_buffer = kzalloc(OUTCONT_BUFLEN, GFP_KERNEL);
+	if (!p_priv->outcont_buffer)
+		goto err_free_inack_buffer;
+
+	p_priv->device_details = d_details;
+
+	/* Setup values for the various callback routines */
+	cback = &keyspan_callbacks[d_details->msg_format];
+
+	port_num = port->port_number;
+
+	/* Do indat endpoints first, once for each flip */
+	endp = d_details->indat_endpoints[port_num];
+	for (i = 0; i <= d_details->indat_endp_flip; ++i, ++endp) {
+		p_priv->in_urbs[i] = keyspan_setup_urb(serial, endp,
+						USB_DIR_IN, port,
+						p_priv->in_buffer[i],
+						IN_BUFLEN,
+						cback->indat_callback);
+	}
+	/* outdat endpoints also have flip */
+	endp = d_details->outdat_endpoints[port_num];
+	for (i = 0; i <= d_details->outdat_endp_flip; ++i, ++endp) {
+		p_priv->out_urbs[i] = keyspan_setup_urb(serial, endp,
+						USB_DIR_OUT, port,
+						p_priv->out_buffer[i],
+						OUT_BUFLEN,
+						cback->outdat_callback);
+	}
+	/* inack endpoint */
+	p_priv->inack_urb = keyspan_setup_urb(serial,
+					d_details->inack_endpoints[port_num],
+					USB_DIR_IN, port,
+					p_priv->inack_buffer,
+					INACK_BUFLEN,
+					cback->inack_callback);
+	/* outcont endpoint */
+	p_priv->outcont_urb = keyspan_setup_urb(serial,
+					d_details->outcont_endpoints[port_num],
+					USB_DIR_OUT, port,
+					p_priv->outcont_buffer,
+					OUTCONT_BUFLEN,
+					 cback->outcont_callback);
+
+	usb_set_serial_port_data(port, p_priv);
+
+	return 0;
+
+err_free_inack_buffer:
+	kfree(p_priv->inack_buffer);
+err_free_out_buffer:
+	for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i)
+		kfree(p_priv->out_buffer[i]);
+err_free_in_buffer:
+	for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i)
+		kfree(p_priv->in_buffer[i]);
+	kfree(p_priv);
+
+	return -ENOMEM;
+}
+
+static void keyspan_port_remove(struct usb_serial_port *port)
+{
+	struct keyspan_port_private *p_priv;
+	int i;
+
+	p_priv = usb_get_serial_port_data(port);
+
+	usb_kill_urb(p_priv->inack_urb);
+	usb_kill_urb(p_priv->outcont_urb);
+	for (i = 0; i < 2; i++) {
+		usb_kill_urb(p_priv->in_urbs[i]);
+		usb_kill_urb(p_priv->out_urbs[i]);
+	}
+
+	usb_free_urb(p_priv->inack_urb);
+	usb_free_urb(p_priv->outcont_urb);
+	for (i = 0; i < 2; i++) {
+		usb_free_urb(p_priv->in_urbs[i]);
+		usb_free_urb(p_priv->out_urbs[i]);
+	}
+
+	kfree(p_priv->outcont_buffer);
+	kfree(p_priv->inack_buffer);
+	for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i)
+		kfree(p_priv->out_buffer[i]);
+	for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i)
+		kfree(p_priv->in_buffer[i]);
+
+	kfree(p_priv);
+}
+
+/* Structs for the devices, pre and post renumeration. */
+static struct usb_serial_driver keyspan_pre_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "keyspan_no_firm",
+	},
+	.description		= "Keyspan - (without firmware)",
+	.id_table		= keyspan_pre_ids,
+	.num_ports		= 1,
+	.attach			= keyspan_fake_startup,
+};
+
+static struct usb_serial_driver keyspan_1port_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "keyspan_1",
+	},
+	.description		= "Keyspan 1 port adapter",
+	.id_table		= keyspan_1port_ids,
+	.num_ports		= 1,
+	.open			= keyspan_open,
+	.close			= keyspan_close,
+	.dtr_rts		= keyspan_dtr_rts,
+	.write			= keyspan_write,
+	.write_room		= keyspan_write_room,
+	.set_termios		= keyspan_set_termios,
+	.break_ctl		= keyspan_break_ctl,
+	.tiocmget		= keyspan_tiocmget,
+	.tiocmset		= keyspan_tiocmset,
+	.attach			= keyspan_startup,
+	.disconnect		= keyspan_disconnect,
+	.release		= keyspan_release,
+	.port_probe		= keyspan_port_probe,
+	.port_remove		= keyspan_port_remove,
+};
+
+static struct usb_serial_driver keyspan_2port_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "keyspan_2",
+	},
+	.description		= "Keyspan 2 port adapter",
+	.id_table		= keyspan_2port_ids,
+	.num_ports		= 2,
+	.open			= keyspan_open,
+	.close			= keyspan_close,
+	.dtr_rts		= keyspan_dtr_rts,
+	.write			= keyspan_write,
+	.write_room		= keyspan_write_room,
+	.set_termios		= keyspan_set_termios,
+	.break_ctl		= keyspan_break_ctl,
+	.tiocmget		= keyspan_tiocmget,
+	.tiocmset		= keyspan_tiocmset,
+	.attach			= keyspan_startup,
+	.disconnect		= keyspan_disconnect,
+	.release		= keyspan_release,
+	.port_probe		= keyspan_port_probe,
+	.port_remove		= keyspan_port_remove,
+};
+
+static struct usb_serial_driver keyspan_4port_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "keyspan_4",
+	},
+	.description		= "Keyspan 4 port adapter",
+	.id_table		= keyspan_4port_ids,
+	.num_ports		= 4,
+	.open			= keyspan_open,
+	.close			= keyspan_close,
+	.dtr_rts		= keyspan_dtr_rts,
+	.write			= keyspan_write,
+	.write_room		= keyspan_write_room,
+	.set_termios		= keyspan_set_termios,
+	.break_ctl		= keyspan_break_ctl,
+	.tiocmget		= keyspan_tiocmget,
+	.tiocmset		= keyspan_tiocmset,
+	.attach			= keyspan_startup,
+	.disconnect		= keyspan_disconnect,
+	.release		= keyspan_release,
+	.port_probe		= keyspan_port_probe,
+	.port_remove		= keyspan_port_remove,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&keyspan_pre_device, &keyspan_1port_device,
+	&keyspan_2port_device, &keyspan_4port_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, keyspan_ids_combined);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+MODULE_FIRMWARE("keyspan/usa28.fw");
+MODULE_FIRMWARE("keyspan/usa28x.fw");
+MODULE_FIRMWARE("keyspan/usa28xa.fw");
+MODULE_FIRMWARE("keyspan/usa28xb.fw");
+MODULE_FIRMWARE("keyspan/usa19.fw");
+MODULE_FIRMWARE("keyspan/usa19qi.fw");
+MODULE_FIRMWARE("keyspan/mpr.fw");
+MODULE_FIRMWARE("keyspan/usa19qw.fw");
+MODULE_FIRMWARE("keyspan/usa18x.fw");
+MODULE_FIRMWARE("keyspan/usa19w.fw");
+MODULE_FIRMWARE("keyspan/usa49w.fw");
+MODULE_FIRMWARE("keyspan/usa49wlc.fw");
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
new file mode 100644
index 000000000..6fd15cd9e
--- /dev/null
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -0,0 +1,720 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * USB Keyspan PDA / Xircom / Entrega Converter driver
+ *
+ * Copyright (C) 1999 - 2001 Greg Kroah-Hartman	<greg@kroah.com>
+ * Copyright (C) 1999, 2000 Brian Warner	<warner@lothar.com>
+ * Copyright (C) 2000 Al Borchers		<borchers@steinerpoint.com>
+ * Copyright (C) 2020 Johan Hovold <johan@kernel.org>
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/usb/ezusb.h>
+
+#define DRIVER_AUTHOR "Brian Warner <warner@lothar.com>, Johan Hovold <johan@kernel.org>"
+#define DRIVER_DESC "USB Keyspan PDA Converter driver"
+
+#define KEYSPAN_TX_THRESHOLD	128
+
+struct keyspan_pda_private {
+	int			tx_room;
+	struct work_struct	unthrottle_work;
+	struct usb_serial	*serial;
+	struct usb_serial_port	*port;
+};
+
+static int keyspan_pda_write_start(struct usb_serial_port *port);
+
+#define KEYSPAN_VENDOR_ID		0x06cd
+#define KEYSPAN_PDA_FAKE_ID		0x0103
+#define KEYSPAN_PDA_ID			0x0104 /* no clue */
+
+/* For Xircom PGSDB9 and older Entrega version of the same device */
+#define XIRCOM_VENDOR_ID		0x085a
+#define XIRCOM_FAKE_ID			0x8027
+#define XIRCOM_FAKE_ID_2		0x8025 /* "PGMFHUB" serial */
+#define ENTREGA_VENDOR_ID		0x1645
+#define ENTREGA_FAKE_ID			0x8093
+
+static const struct usb_device_id id_table_combined[] = {
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
+	{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
+	{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID_2) },
+	{ USB_DEVICE(ENTREGA_VENDOR_ID, ENTREGA_FAKE_ID) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
+	{ }						/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table_combined);
+
+static const struct usb_device_id id_table_std[] = {
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
+	{ }						/* Terminating entry */
+};
+
+static const struct usb_device_id id_table_fake[] = {
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
+	{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
+	{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID_2) },
+	{ USB_DEVICE(ENTREGA_VENDOR_ID, ENTREGA_FAKE_ID) },
+	{ }						/* Terminating entry */
+};
+
+static int keyspan_pda_get_write_room(struct keyspan_pda_private *priv)
+{
+	struct usb_serial_port *port = priv->port;
+	struct usb_serial *serial = port->serial;
+	u8 room;
+	int rc;
+
+	rc = usb_control_msg_recv(serial->dev,
+				  0,
+				  6, /* write_room */
+				  USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_IN,
+				  0, /* value: 0 means "remaining room" */
+				  0, /* index */
+				  &room,
+				  1,
+				  2000,
+				  GFP_KERNEL);
+	if (rc) {
+		dev_dbg(&port->dev, "roomquery failed: %d\n", rc);
+		return rc;
+	}
+
+	dev_dbg(&port->dev, "roomquery says %d\n", room);
+
+	return room;
+}
+
+static void keyspan_pda_request_unthrottle(struct work_struct *work)
+{
+	struct keyspan_pda_private *priv =
+		container_of(work, struct keyspan_pda_private, unthrottle_work);
+	struct usb_serial_port *port = priv->port;
+	struct usb_serial *serial = port->serial;
+	unsigned long flags;
+	int result;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	/*
+	 * Ask the device to tell us when the tx buffer becomes
+	 * sufficiently empty.
+	 */
+	result = usb_control_msg(serial->dev,
+				 usb_sndctrlpipe(serial->dev, 0),
+				 7, /* request_unthrottle */
+				 USB_TYPE_VENDOR | USB_RECIP_INTERFACE
+				 | USB_DIR_OUT,
+				 KEYSPAN_TX_THRESHOLD,
+				 0, /* index */
+				 NULL,
+				 0,
+				 2000);
+	if (result < 0)
+		dev_dbg(&serial->dev->dev, "%s - error %d from usb_control_msg\n",
+			__func__, result);
+	/*
+	 * Need to check available space after requesting notification in case
+	 * buffer is already empty so that no notification is sent.
+	 */
+	result = keyspan_pda_get_write_room(priv);
+	if (result > KEYSPAN_TX_THRESHOLD) {
+		spin_lock_irqsave(&port->lock, flags);
+		priv->tx_room = max(priv->tx_room, result);
+		spin_unlock_irqrestore(&port->lock, flags);
+
+		usb_serial_port_softint(port);
+	}
+}
+
+static void keyspan_pda_rx_interrupt(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	unsigned int len = urb->actual_length;
+	int retval;
+	int status = urb->status;
+	struct keyspan_pda_private *priv;
+	unsigned long flags;
+
+	priv = usb_get_serial_port_data(port);
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status);
+		return;
+	default:
+		dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status);
+		goto exit;
+	}
+
+	if (len < 1) {
+		dev_warn(&port->dev, "short message received\n");
+		goto exit;
+	}
+
+	/* see if the message is data or a status interrupt */
+	switch (data[0]) {
+	case 0:
+		 /* rest of message is rx data */
+		if (len < 2)
+			break;
+		tty_insert_flip_string(&port->port, data + 1, len - 1);
+		tty_flip_buffer_push(&port->port);
+		break;
+	case 1:
+		/* status interrupt */
+		if (len < 2) {
+			dev_warn(&port->dev, "short interrupt message received\n");
+			break;
+		}
+		dev_dbg(&port->dev, "rx int, d1=%d\n", data[1]);
+		switch (data[1]) {
+		case 1: /* modemline change */
+			break;
+		case 2: /* tx unthrottle interrupt */
+			spin_lock_irqsave(&port->lock, flags);
+			priv->tx_room = max(priv->tx_room, KEYSPAN_TX_THRESHOLD);
+			spin_unlock_irqrestore(&port->lock, flags);
+
+			keyspan_pda_write_start(port);
+
+			usb_serial_port_softint(port);
+			break;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&port->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
+}
+
+static void keyspan_pda_rx_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	/*
+	 * Stop receiving characters. We just turn off the URB request, and
+	 * let chars pile up in the device. If we're doing hardware
+	 * flowcontrol, the device will signal the other end when its buffer
+	 * fills up. If we're doing XON/XOFF, this would be a good time to
+	 * send an XOFF, although it might make sense to foist that off upon
+	 * the device too.
+	 */
+	usb_kill_urb(port->interrupt_in_urb);
+}
+
+static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	/* just restart the receive interrupt URB */
+	if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL))
+		dev_dbg(&port->dev, "usb_submit_urb(read urb) failed\n");
+}
+
+static speed_t keyspan_pda_setbaud(struct usb_serial *serial, speed_t baud)
+{
+	int rc;
+	int bindex;
+
+	switch (baud) {
+	case 110:
+		bindex = 0;
+		break;
+	case 300:
+		bindex = 1;
+		break;
+	case 1200:
+		bindex = 2;
+		break;
+	case 2400:
+		bindex = 3;
+		break;
+	case 4800:
+		bindex = 4;
+		break;
+	case 9600:
+		bindex = 5;
+		break;
+	case 19200:
+		bindex = 6;
+		break;
+	case 38400:
+		bindex = 7;
+		break;
+	case 57600:
+		bindex = 8;
+		break;
+	case 115200:
+		bindex = 9;
+		break;
+	default:
+		bindex = 5;	/* Default to 9600 */
+		baud = 9600;
+	}
+
+	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			     0, /* set baud */
+			     USB_TYPE_VENDOR
+			     | USB_RECIP_INTERFACE
+			     | USB_DIR_OUT, /* type */
+			     bindex, /* value */
+			     0, /* index */
+			     NULL, /* &data */
+			     0, /* size */
+			     2000); /* timeout */
+	if (rc < 0)
+		return 0;
+
+	return baud;
+}
+
+static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
+	int value;
+	int result;
+
+	if (break_state == -1)
+		value = 1; /* start break */
+	else
+		value = 0; /* clear break */
+
+	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			4, /* set break */
+			USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			value, 0, NULL, 0, 2000);
+	if (result < 0)
+		dev_dbg(&port->dev, "%s - error %d from usb_control_msg\n",
+			__func__, result);
+}
+
+static void keyspan_pda_set_termios(struct tty_struct *tty,
+				    struct usb_serial_port *port,
+				    const struct ktermios *old_termios)
+{
+	struct usb_serial *serial = port->serial;
+	speed_t speed;
+
+	/*
+	 * cflag specifies lots of stuff: number of stop bits, parity, number
+	 * of data bits, baud. What can the device actually handle?:
+	 * CSTOPB (1 stop bit or 2)
+	 * PARENB (parity)
+	 * CSIZE (5bit .. 8bit)
+	 * There is minimal hw support for parity (a PSW bit seems to hold the
+	 * parity of whatever is in the accumulator). The UART either deals
+	 * with 10 bits (start, 8 data, stop) or 11 bits (start, 8 data,
+	 * 1 special, stop). So, with firmware changes, we could do:
+	 * 8N1: 10 bit
+	 * 8N2: 11 bit, extra bit always (mark?)
+	 * 8[EOMS]1: 11 bit, extra bit is parity
+	 * 7[EOMS]1: 10 bit, b0/b7 is parity
+	 * 7[EOMS]2: 11 bit, b0/b7 is parity, extra bit always (mark?)
+	 *
+	 * HW flow control is dictated by the tty->termios.c_cflags & CRTSCTS
+	 * bit.
+	 *
+	 * For now, just do baud.
+	 */
+	speed = tty_get_baud_rate(tty);
+	speed = keyspan_pda_setbaud(serial, speed);
+
+	if (speed == 0) {
+		dev_dbg(&port->dev, "can't handle requested baud rate\n");
+		/* It hasn't changed so.. */
+		speed = tty_termios_baud_rate(old_termios);
+	}
+	/*
+	 * Only speed can change so copy the old h/w parameters then encode
+	 * the new speed.
+	 */
+	tty_termios_copy_hw(&tty->termios, old_termios);
+	tty_encode_baud_rate(tty, speed, speed);
+}
+
+/*
+ * Modem control pins: DTR and RTS are outputs and can be controlled.
+ * DCD, RI, DSR, CTS are inputs and can be read. All outputs can also be
+ * read. The byte passed is: DTR(b7) DCD RI DSR CTS RTS(b2) unused unused.
+ */
+static int keyspan_pda_get_modem_info(struct usb_serial *serial,
+				      unsigned char *value)
+{
+	int rc;
+	u8 data;
+
+	rc = usb_control_msg_recv(serial->dev, 0,
+				  3, /* get pins */
+				  USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_IN,
+				  0,
+				  0,
+				  &data,
+				  1,
+				  2000,
+				  GFP_KERNEL);
+	if (rc == 0)
+		*value = data;
+
+	return rc;
+}
+
+static int keyspan_pda_set_modem_info(struct usb_serial *serial,
+				      unsigned char value)
+{
+	int rc;
+	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			     3, /* set pins */
+			     USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_OUT,
+			     value, 0, NULL, 0, 2000);
+	return rc;
+}
+
+static int keyspan_pda_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
+	int rc;
+	unsigned char status;
+	int value;
+
+	rc = keyspan_pda_get_modem_info(serial, &status);
+	if (rc < 0)
+		return rc;
+
+	value = ((status & BIT(7)) ? TIOCM_DTR : 0) |
+		((status & BIT(6)) ? TIOCM_CAR : 0) |
+		((status & BIT(5)) ? TIOCM_RNG : 0) |
+		((status & BIT(4)) ? TIOCM_DSR : 0) |
+		((status & BIT(3)) ? TIOCM_CTS : 0) |
+		((status & BIT(2)) ? TIOCM_RTS : 0);
+
+	return value;
+}
+
+static int keyspan_pda_tiocmset(struct tty_struct *tty,
+				unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
+	int rc;
+	unsigned char status;
+
+	rc = keyspan_pda_get_modem_info(serial, &status);
+	if (rc < 0)
+		return rc;
+
+	if (set & TIOCM_RTS)
+		status |= BIT(2);
+	if (set & TIOCM_DTR)
+		status |= BIT(7);
+
+	if (clear & TIOCM_RTS)
+		status &= ~BIT(2);
+	if (clear & TIOCM_DTR)
+		status &= ~BIT(7);
+	rc = keyspan_pda_set_modem_info(serial, status);
+	return rc;
+}
+
+static int keyspan_pda_write_start(struct usb_serial_port *port)
+{
+	struct keyspan_pda_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	struct urb *urb;
+	int count;
+	int room;
+	int rc;
+
+	/*
+	 * Guess how much room is left in the device's ring buffer. If our
+	 * write will result in no room left, ask the device to give us an
+	 * interrupt when the room available rises above a threshold but also
+	 * query how much room is currently available (in case our guess was
+	 * too conservative and the buffer is already empty when the
+	 * unthrottle work is scheduled).
+	 */
+
+	/*
+	 * We might block because of:
+	 * the TX urb is in-flight (wait until it completes)
+	 * the device is full (wait until it says there is room)
+	 */
+	spin_lock_irqsave(&port->lock, flags);
+
+	room = priv->tx_room;
+	count = kfifo_len(&port->write_fifo);
+
+	if (!test_bit(0, &port->write_urbs_free) || count == 0 || room == 0) {
+		spin_unlock_irqrestore(&port->lock, flags);
+		return 0;
+	}
+	__clear_bit(0, &port->write_urbs_free);
+
+	if (count > room)
+		count = room;
+	if (count > port->bulk_out_size)
+		count = port->bulk_out_size;
+
+	urb = port->write_urb;
+	count = kfifo_out(&port->write_fifo, urb->transfer_buffer, count);
+	urb->transfer_buffer_length = count;
+
+	port->tx_bytes += count;
+	priv->tx_room -= count;
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	dev_dbg(&port->dev, "%s - count = %d, txroom = %d\n", __func__, count, room);
+
+	rc = usb_submit_urb(urb, GFP_ATOMIC);
+	if (rc) {
+		dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed\n");
+
+		spin_lock_irqsave(&port->lock, flags);
+		port->tx_bytes -= count;
+		priv->tx_room = max(priv->tx_room, room + count);
+		__set_bit(0, &port->write_urbs_free);
+		spin_unlock_irqrestore(&port->lock, flags);
+
+		return rc;
+	}
+
+	if (count == room)
+		schedule_work(&priv->unthrottle_work);
+
+	return count;
+}
+
+static void keyspan_pda_write_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	port->tx_bytes -= urb->transfer_buffer_length;
+	__set_bit(0, &port->write_urbs_free);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	keyspan_pda_write_start(port);
+
+	usb_serial_port_softint(port);
+}
+
+static int keyspan_pda_write(struct tty_struct *tty, struct usb_serial_port *port,
+		const unsigned char *buf, int count)
+{
+	int rc;
+
+	dev_dbg(&port->dev, "%s - count = %d\n", __func__, count);
+
+	if (!count)
+		return 0;
+
+	count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
+
+	rc = keyspan_pda_write_start(port);
+	if (rc)
+		return rc;
+
+	return count;
+}
+
+static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_serial *serial = port->serial;
+
+	if (on)
+		keyspan_pda_set_modem_info(serial, BIT(7) | BIT(2));
+	else
+		keyspan_pda_set_modem_info(serial, 0);
+}
+
+
+static int keyspan_pda_open(struct tty_struct *tty,
+					struct usb_serial_port *port)
+{
+	struct keyspan_pda_private *priv = usb_get_serial_port_data(port);
+	int rc;
+
+	/* find out how much room is in the Tx ring */
+	rc = keyspan_pda_get_write_room(priv);
+	if (rc < 0)
+		return rc;
+
+	spin_lock_irq(&port->lock);
+	priv->tx_room = rc;
+	spin_unlock_irq(&port->lock);
+
+	rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (rc) {
+		dev_dbg(&port->dev, "%s - usb_submit_urb(read int) failed\n", __func__);
+		return rc;
+	}
+
+	return 0;
+}
+
+static void keyspan_pda_close(struct usb_serial_port *port)
+{
+	struct keyspan_pda_private *priv = usb_get_serial_port_data(port);
+
+	/*
+	 * Stop the interrupt URB first as its completion handler may submit
+	 * the write URB.
+	 */
+	usb_kill_urb(port->interrupt_in_urb);
+	usb_kill_urb(port->write_urb);
+
+	cancel_work_sync(&priv->unthrottle_work);
+
+	spin_lock_irq(&port->lock);
+	kfifo_reset(&port->write_fifo);
+	spin_unlock_irq(&port->lock);
+}
+
+/* download the firmware to a "fake" device (pre-renumeration) */
+static int keyspan_pda_fake_startup(struct usb_serial *serial)
+{
+	unsigned int vid = le16_to_cpu(serial->dev->descriptor.idVendor);
+	const char *fw_name;
+
+	/* download the firmware here ... */
+	ezusb_fx1_set_reset(serial->dev, 1);
+
+	switch (vid) {
+	case KEYSPAN_VENDOR_ID:
+		fw_name = "keyspan_pda/keyspan_pda.fw";
+		break;
+	case XIRCOM_VENDOR_ID:
+	case ENTREGA_VENDOR_ID:
+		fw_name = "keyspan_pda/xircom_pgs.fw";
+		break;
+	default:
+		dev_err(&serial->dev->dev, "%s: unknown vendor, aborting.\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) {
+		dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n",
+			fw_name);
+		return -ENOENT;
+	}
+
+	/*
+	 * After downloading firmware renumeration will occur in a moment and
+	 * the new device will bind to the real driver.
+	 */
+
+	/* We want this device to fail to have a driver assigned to it. */
+	return 1;
+}
+
+MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw");
+MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
+
+static int keyspan_pda_port_probe(struct usb_serial_port *port)
+{
+
+	struct keyspan_pda_private *priv;
+
+	priv = kmalloc(sizeof(struct keyspan_pda_private), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle);
+	priv->port = port;
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
+}
+
+static void keyspan_pda_port_remove(struct usb_serial_port *port)
+{
+	struct keyspan_pda_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+}
+
+static struct usb_serial_driver keyspan_pda_fake_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"keyspan_pda_pre",
+	},
+	.description =		"Keyspan PDA - (prerenumeration)",
+	.id_table =		id_table_fake,
+	.num_ports =		1,
+	.attach =		keyspan_pda_fake_startup,
+};
+
+static struct usb_serial_driver keyspan_pda_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"keyspan_pda",
+	},
+	.description =		"Keyspan PDA",
+	.id_table =		id_table_std,
+	.num_ports =		1,
+	.num_bulk_out =		1,
+	.num_interrupt_in =	1,
+	.dtr_rts =		keyspan_pda_dtr_rts,
+	.open =			keyspan_pda_open,
+	.close =		keyspan_pda_close,
+	.write =		keyspan_pda_write,
+	.write_bulk_callback =	keyspan_pda_write_bulk_callback,
+	.read_int_callback =	keyspan_pda_rx_interrupt,
+	.throttle =		keyspan_pda_rx_throttle,
+	.unthrottle =		keyspan_pda_rx_unthrottle,
+	.set_termios =		keyspan_pda_set_termios,
+	.break_ctl =		keyspan_pda_break_ctl,
+	.tiocmget =		keyspan_pda_tiocmget,
+	.tiocmset =		keyspan_pda_tiocmset,
+	.port_probe =		keyspan_pda_port_probe,
+	.port_remove =		keyspan_pda_port_remove,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&keyspan_pda_device,
+	&keyspan_pda_fake_device,
+	NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table_combined);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/keyspan_usa26msg.h b/drivers/usb/serial/keyspan_usa26msg.h
new file mode 100644
index 000000000..a68f1fb25
--- /dev/null
+++ b/drivers/usb/serial/keyspan_usa26msg.h
@@ -0,0 +1,261 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+	usa26msg.h
+
+	Copyright (C) 1998-2000 InnoSys Incorporated.  All Rights Reserved
+	This file is available under a BSD-style copyright
+
+	Keyspan USB Async Message Formats for the USA28X
+
+	Redistribution and use in source and binary forms, with or without
+	modification, are permitted provided that the following conditions are
+	met:
+
+	1. Redistributions of source code must retain this licence text
+   	without modification, this list of conditions, and the following
+   	disclaimer.  The following copyright notice must appear immediately at
+   	the beginning of all source files:
+
+        	Copyright (C) 1998-2000 InnoSys Incorporated.  All Rights Reserved
+
+        	This file is available under a BSD-style copyright
+
+	2. The name of InnoSys Incorporated may not be used to endorse or promote
+   	products derived from this software without specific prior written
+   	permission.
+
+	THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR
+	IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+	OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+	NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+	INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+	(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+	SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+	CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+	LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+	OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+	SUCH DAMAGE.    
+
+	Third revision: USA28X version (aka USA26)
+
+	Buffer formats for RX/TX data messages are not defined by
+	a structure, but are described here:
+
+	USB OUT (host -> USAxx, transmit) messages contain a 
+	REQUEST_ACK indicator (set to 0xff to request an ACK at the 
+	completion of transmit; 0x00 otherwise), followed by data:
+
+		RQSTACK DAT DAT DAT ...
+
+	with a total data length of 63.
+
+	USB IN (USAxx -> host, receive) messages begin with a status
+	byte in which the 0x80 bit is either:
+
+		(a)	0x80 bit clear
+			indicates that the bytes following it are all data
+			bytes:
+
+				STAT DATA DATA DATA DATA DATA ...
+
+			for a total of up to 63 DATA bytes,
+
+	or:
+
+		(b)	0x80 bit set
+			indicates that the bytes following alternate data and
+			status bytes:
+
+				STAT DATA STAT DATA STAT DATA STAT DATA ...
+
+			for a total of up to 32 DATA bytes.
+
+	The valid bits in the STAT bytes are:
+
+		OVERRUN	0x02
+		PARITY	0x04
+		FRAMING	0x08
+		BREAK	0x10
+
+	Notes:
+
+	(1) The OVERRUN bit can appear in either (a) or (b) format
+		messages, but the but the PARITY/FRAMING/BREAK bits
+		only appear in (b) format messages.
+	(2) For the host to determine the exact point at which the
+		overrun occurred (to identify the point in the data
+		stream at which the data was lost), it needs to count
+		128 characters, starting at the first character of the
+		message in which OVERRUN was reported; the lost character(s)
+		would have been received between the 128th and 129th
+		characters.
+	(3)	An RX data message in which the first byte has 0x80 clear
+		serves as a "break off" indicator.
+
+	revision history:
+
+	1999feb10	add reportHskiaChanges to allow us to ignore them
+	1999feb10	add txAckThreshold for fast+loose throughput enhancement
+	1999mar30	beef up support for RX error reporting
+	1999apr14	add resetDataToggle to control message
+	2000jan04	merge with usa17msg.h
+	2000jun01	add extended BSD-style copyright text
+	2001jul05	change message format to improve OVERRUN case
+
+	Note on shared names:
+
+	In the case of fields which have been merged between the USA17
+	and USA26 definitions, the USA26 definition is the first part
+	of the name and the USA17 definition is the second part of the
+	name; both meanings are described below.
+*/
+
+#ifndef	__USA26MSG__
+#define	__USA26MSG__
+
+
+struct keyspan_usa26_portControlMessage
+{
+	/*
+		there are three types of "commands" sent in the control message:
+
+		1.	configuration changes which must be requested by setting
+			the corresponding "set" flag (and should only be requested
+			when necessary, to reduce overhead on the USA26):
+	*/
+	u8	setClocking,	// BOTH: host requests baud rate be set
+		baudLo,		// BOTH: host does baud divisor calculation
+		baudHi,		// BOTH: baudHi is only used for first port (gives lower rates)
+		externalClock_txClocking,
+					// USA26: 0=internal, other=external
+					// USA17: 0=internal, other=external/RI
+		rxClocking,		// USA17: 0=internal, 1=external/RI, other=external/DSR
+
+
+		setLcr,			// BOTH: host requests lcr be set
+		lcr,			// BOTH: use PARITY, STOPBITS, DATABITS below
+
+		setFlowControl,		// BOTH: host requests flow control be set
+		ctsFlowControl,		// BOTH: 1=use CTS flow control, 0=don't
+		xonFlowControl,		// BOTH: 1=use XON/XOFF flow control, 0=don't
+		xonChar,		// BOTH: specified in current character format
+		xoffChar,		// BOTH: specified in current character format
+
+		setTxTriState_setRts,
+					// USA26: host requests TX tri-state be set
+					// USA17: host requests RTS output be set
+		txTriState_rts,		// BOTH: 1=active (normal), 0=tristate (off)
+
+		setHskoa_setDtr,
+					// USA26: host requests HSKOA output be set
+					// USA17: host requests DTR output be set
+		hskoa_dtr,		// BOTH: 1=on, 0=off
+
+		setPrescaler,		// USA26: host requests prescalar be set (default: 13)
+		prescaler;		// BOTH: specified as N/8; values 8-ff are valid
+					// must be set any time internal baud rate is set;
+					// must not be set when external clocking is used
+					// note: in USA17, prescaler is applied whenever
+					// setClocking is requested
+
+	/*
+		3.	configuration data which is simply used as is (no overhead,
+			but must be specified correctly in every host message).
+	*/
+	u8	forwardingLength,  // BOTH: forward when this number of chars available
+		reportHskiaChanges_dsrFlowControl,
+						// USA26: 1=normal; 0=ignore external clock
+						// USA17: 1=use DSR flow control, 0=don't
+		txAckThreshold,	// BOTH: 0=not allowed, 1=normal, 2-255 deliver ACK faster
+		loopbackMode;	// BOTH: 0=no loopback, 1=loopback enabled
+
+	/*
+		4.	commands which are flags only; these are processed in order
+			(so that, e.g., if both _txOn and _txOff flags are set, the
+			port ends in a TX_OFF state); any non-zero value is respected
+	*/
+	u8	_txOn,			// BOTH: enable transmitting (and continue if there's data)
+		_txOff,			// BOTH: stop transmitting
+		txFlush,		// BOTH: toss outbound data
+		txBreak,		// BOTH: turn on break (cleared by _txOn)
+		rxOn,			// BOTH: turn on receiver
+		rxOff,			// BOTH: turn off receiver
+		rxFlush,		// BOTH: toss inbound data
+		rxForward,		// BOTH: forward all inbound data, NOW (as if fwdLen==1)
+		returnStatus,	// BOTH: return current status (even if it hasn't changed)
+		resetDataToggle;// BOTH: reset data toggle state to DATA0
+	
+};
+
+// defines for bits in lcr
+#define	USA_DATABITS_5		0x00
+#define	USA_DATABITS_6		0x01
+#define	USA_DATABITS_7		0x02
+#define	USA_DATABITS_8		0x03
+#define	STOPBITS_5678_1	0x00	// 1 stop bit for all byte sizes
+#define	STOPBITS_5_1p5	0x04	// 1.5 stop bits for 5-bit byte
+#define	STOPBITS_678_2	0x04	// 2 stop bits for 6/7/8-bit byte
+#define	USA_PARITY_NONE		0x00
+#define	USA_PARITY_ODD		0x08
+#define	USA_PARITY_EVEN		0x18
+#define	PARITY_1		0x28
+#define	PARITY_0		0x38
+
+// all things called "StatusMessage" are sent on the status endpoint
+
+struct keyspan_usa26_portStatusMessage	// one for each port
+{
+	u8	port,			// BOTH: 0=first, 1=second, other=see below
+		hskia_cts,		// USA26: reports HSKIA pin
+						// USA17: reports CTS pin
+		gpia_dcd,		// USA26: reports GPIA pin
+						// USA17: reports DCD pin
+		dsr,			// USA17: reports DSR pin
+		ri,				// USA17: reports RI pin
+		_txOff,			// port has been disabled (by host)
+		_txXoff,		// port is in XOFF state (either host or RX XOFF)
+		rxEnabled,		// as configured by rxOn/rxOff 1=on, 0=off
+		controlResponse;// 1=a control message has been processed
+};
+
+// bits in RX data message when STAT byte is included
+#define	RXERROR_OVERRUN	0x02
+#define	RXERROR_PARITY	0x04
+#define	RXERROR_FRAMING	0x08
+#define	RXERROR_BREAK	0x10
+
+struct keyspan_usa26_globalControlMessage
+{
+	u8	sendGlobalStatus,	// 2=request for two status responses
+		resetStatusToggle,	// 1=reset global status toggle
+		resetStatusCount;	// a cycling value
+};
+
+struct keyspan_usa26_globalStatusMessage
+{
+	u8	port,				// 3
+		sendGlobalStatus,	// from request, decremented
+		resetStatusCount;	// as in request
+};
+
+struct keyspan_usa26_globalDebugMessage
+{
+	u8	port,				// 2
+		a,
+		b,
+		c,
+		d;
+};
+
+// ie: the maximum length of an EZUSB endpoint buffer
+#define	MAX_DATA_LEN			64
+
+// update status approx. 60 times a second (16.6666 ms)
+#define	STATUS_UPDATE_INTERVAL	16
+
+// status rationing tuning value (each port gets checked each n ms)
+#define	STATUS_RATION	10
+
+#endif
+
+
diff --git a/drivers/usb/serial/keyspan_usa28msg.h b/drivers/usb/serial/keyspan_usa28msg.h
new file mode 100644
index 000000000..a19f3fe5d
--- /dev/null
+++ b/drivers/usb/serial/keyspan_usa28msg.h
@@ -0,0 +1,202 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+	usa28msg.h
+
+	Copyright (C) 1998-2000 InnoSys Incorporated.  All Rights Reserved
+	This file is available under a BSD-style copyright
+
+	Keyspan USB Async Message Formats for the USA26X
+
+	Redistribution and use in source and binary forms, with or without
+	modification, are permitted provided that the following conditions are
+	met:
+
+	1. Redistributions of source code must retain this licence text
+   	without modification, this list of conditions, and the following
+   	disclaimer.  The following copyright notice must appear immediately at
+   	the beginning of all source files:
+
+        	Copyright (C) 1998-2000 InnoSys Incorporated.  All Rights Reserved
+
+        	This file is available under a BSD-style copyright
+
+	2. The name of InnoSys Incorporated may not be used to endorse or promote
+   	products derived from this software without specific prior written
+   	permission.
+
+	THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR
+	IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+	OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+	NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+	INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+	(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+	SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+	CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+	LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+	OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+	SUCH DAMAGE.    
+
+	Note: these message formats are common to USA18, USA19, and USA28;
+	(for USA28X, see usa26msg.h)
+
+	Buffer formats for RX/TX data messages are not defined by
+	a structure, but are described here:
+
+	USB OUT (host -> USA28, transmit) messages contain a 
+	REQUEST_ACK indicator (set to 0xff to request an ACK at the 
+	completion of transmit; 0x00 otherwise), followed by data.
+	If the port is configured for parity, the data will be an 
+	alternating string of parity and data bytes, so the message
+	format will be:
+
+		RQSTACK PAR DAT PAR DAT ...
+
+	so the maximum length is 63 bytes (1 + 62, or 31 data bytes);
+	always an odd number for the total message length.
+
+	If there is no parity, the format is simply:
+
+		RQSTACK DAT DAT DAT ...
+
+	with a total data length of 63.
+
+	USB IN (USA28 -> host, receive) messages contain data and parity
+	if parity is configred, thusly:
+	
+		DAT PAR DAT PAR DAT PAR ...
+
+	for a total of 32 data bytes;
+	
+	If parity is not configured, the format is:
+
+		DAT DAT DAT ...
+
+	for a total of 64 data bytes.
+
+	In the TX messages (USB OUT), the 0x01 bit of the PARity byte is 
+	the parity bit.  In the RX messages (USB IN), the PARity byte is 
+	the content of the 8051's status register; the parity bit 
+	(RX_PARITY_BIT) is the 0x04 bit.
+
+	revision history:
+
+	1999may06	add resetDataToggle to control message
+	2000mar21	add rs232invalid to status response message
+	2000apr04	add 230.4Kb definition to setBaudRate
+	2000apr13	add/remove loopbackMode switch
+	2000apr13	change definition of setBaudRate to cover 115.2Kb, too
+	2000jun01	add extended BSD-style copyright text
+*/
+
+#ifndef	__USA28MSG__
+#define	__USA28MSG__
+
+
+struct keyspan_usa28_portControlMessage
+{
+	/*
+		there are four types of "commands" sent in the control message:
+
+		1.	configuration changes which must be requested by setting
+			the corresponding "set" flag (and should only be requested
+			when necessary, to reduce overhead on the USA28):
+	*/
+	u8	setBaudRate,	// 0=don't set, 1=baudLo/Hi, 2=115.2K, 3=230.4K
+		baudLo,			// host does baud divisor calculation
+		baudHi;			// baudHi is only used for first port (gives lower rates)
+
+	/*
+		2.	configuration changes which are done every time (because it's
+			hardly more trouble to do them than to check whether to do them):
+	*/
+	u8	parity,			// 1=use parity, 0=don't
+		ctsFlowControl,	        // all except 19Q: 1=use CTS flow control, 0=don't
+					// 19Q: 0x08:CTSflowControl 0x10:DSRflowControl
+		xonFlowControl,	// 1=use XON/XOFF flow control, 0=don't
+		rts,			// 1=on, 0=off
+		dtr;			// 1=on, 0=off
+
+	/*
+		3.	configuration data which is simply used as is (no overhead,
+			but must be correct in every host message).
+	*/
+	u8	forwardingLength,  // forward when this number of chars available
+		forwardMs,		// forward this many ms after last rx data
+		breakThreshold,	// specified in ms, 1-255 (see note below)
+		xonChar,		// specified in current character format
+		xoffChar;		// specified in current character format
+
+	/*
+		4.	commands which are flags only; these are processed in order
+			(so that, e.g., if both _txOn and _txOff flags are set, the
+			port ends in a TX_OFF state); any non-zero value is respected
+	*/
+	u8	_txOn,			// enable transmitting (and continue if there's data)
+		_txOff,			// stop transmitting
+		txFlush,		// toss outbound data
+		txForceXoff,	// pretend we've received XOFF
+		txBreak,		// turn on break (leave on until txOn clears it)
+		rxOn,			// turn on receiver
+		rxOff,			// turn off receiver
+		rxFlush,		// toss inbound data
+		rxForward,		// forward all inbound data, NOW
+		returnStatus,	// return current status n times (1 or 2)
+		resetDataToggle;// reset data toggle state to DATA0
+	
+};
+
+struct keyspan_usa28_portStatusMessage
+{
+	u8	port,			// 0=first, 1=second, 2=global (see below)
+		cts,
+		dsr,			// (not used in all products)
+		dcd,
+
+		ri,				// (not used in all products)
+		_txOff,			// port has been disabled (by host)
+		_txXoff,		// port is in XOFF state (either host or RX XOFF)
+		dataLost,		// count of lost chars; wraps; not guaranteed exact
+
+		rxEnabled,		// as configured by rxOn/rxOff 1=on, 0=off
+		rxBreak,		// 1=we're in break state
+		rs232invalid,	// 1=no valid signals on rs-232 inputs
+		controlResponse;// 1=a control messages has been processed
+};
+
+// bit defines in txState
+#define	TX_OFF			0x01	// requested by host txOff command
+#define	TX_XOFF			0x02	// either real, or simulated by host
+
+struct keyspan_usa28_globalControlMessage
+{
+	u8	sendGlobalStatus,	// 2=request for two status responses
+		resetStatusToggle,	// 1=reset global status toggle
+		resetStatusCount;	// a cycling value
+};
+
+struct keyspan_usa28_globalStatusMessage
+{
+	u8	port,				// 3
+		sendGlobalStatus,	// from request, decremented
+		resetStatusCount;	// as in request
+};
+
+struct keyspan_usa28_globalDebugMessage
+{
+	u8	port,				// 2
+		n,					// typically a count/status byte
+		b;					// typically a data byte
+};
+
+// ie: the maximum length of an EZUSB endpoint buffer
+#define	MAX_DATA_LEN			64
+
+// the parity bytes have only one significant bit
+#define	RX_PARITY_BIT			0x04
+#define	TX_PARITY_BIT			0x01
+
+// update status approx. 60 times a second (16.6666 ms)
+#define	STATUS_UPDATE_INTERVAL	16
+
+#endif
+
diff --git a/drivers/usb/serial/keyspan_usa49msg.h b/drivers/usb/serial/keyspan_usa49msg.h
new file mode 100644
index 000000000..8c3970fdd
--- /dev/null
+++ b/drivers/usb/serial/keyspan_usa49msg.h
@@ -0,0 +1,283 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+	usa49msg.h
+
+	Copyright (C) 1998-2000 InnoSys Incorporated.  All Rights Reserved
+	This file is available under a BSD-style copyright
+
+	Keyspan USB Async Message Formats for the USA49W
+
+	Redistribution and use in source and binary forms, with or without
+	modification, are permitted provided that the following conditions are
+	met:
+
+	1. Redistributions of source code must retain this licence text
+   	without modification, this list of conditions, and the following
+   	disclaimer.  The following copyright notice must appear immediately at
+   	the beginning of all source files:
+
+        	Copyright (C) 1998-2000 InnoSys Incorporated.  All Rights Reserved
+
+        	This file is available under a BSD-style copyright
+
+	2. The name of InnoSys Incorporated may not be used to endorse or promote
+   	products derived from this software without specific prior written
+   	permission.
+
+	THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR
+	IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+	OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+	NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+	INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+	(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+	SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+	CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+	LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+	OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+	SUCH DAMAGE.    
+
+	4th revision: USA49W version
+
+	Buffer formats for RX/TX data messages are not defined by
+	a structure, but are described here:
+
+	USB OUT (host -> USAxx, transmit) messages contain a 
+	REQUEST_ACK indicator (set to 0xff to request an ACK at the 
+	completion of transmit; 0x00 otherwise), followed by data:
+
+		RQSTACK DAT DAT DAT ...
+
+	with a total data length of 63.
+
+	USB IN (USAxx -> host, receive) messages begin with a status
+	byte in which the 0x80 bit is either:
+				   	
+		(a)	0x80 bit clear
+			indicates that the bytes following it are all data
+			bytes:
+
+				STAT DATA DATA DATA DATA DATA ...
+
+			for a total of up to 63 DATA bytes,
+
+	or:
+
+		(b)	0x80 bit set
+			indiates that the bytes following alternate data and
+			status bytes:
+
+				STAT DATA STAT DATA STAT DATA STAT DATA ...
+
+			for a total of up to 32 DATA bytes.
+
+	The valid bits in the STAT bytes are:
+
+		OVERRUN	0x02
+		PARITY	0x04
+		FRAMING	0x08
+		BREAK	0x10
+
+	Notes:
+	
+	(1) The OVERRUN bit can appear in either (a) or (b) format
+		messages, but the but the PARITY/FRAMING/BREAK bits
+		only appear in (b) format messages.
+	(2) For the host to determine the exact point at which the
+		overrun occurred (to identify the point in the data
+		stream at which the data was lost), it needs to count
+		128 characters, starting at the first character of the
+		message in which OVERRUN was reported; the lost character(s)
+		would have been received between the 128th and 129th
+		characters.
+	(3)	An RX data message in which the first byte has 0x80 clear
+		serves as a "break off" indicator.
+	(4)	a control message specifying disablePort will be answered
+		with a status message, but no further status will be sent
+		until a control messages with enablePort is sent
+
+	revision history:
+
+	1999feb10	add reportHskiaChanges to allow us to ignore them
+	1999feb10	add txAckThreshold for fast+loose throughput enhancement
+	1999mar30	beef up support for RX error reporting
+	1999apr14	add resetDataToggle to control message
+	2000jan04	merge with usa17msg.h
+	2000mar08	clone from usa26msg.h -> usa49msg.h
+	2000mar09	change to support 4 ports
+	2000may03	change external clocking to match USA-49W hardware
+	2000jun01	add extended BSD-style copyright text
+	2001jul05	change message format to improve OVERRUN case
+*/
+
+#ifndef	__USA49MSG__
+#define	__USA49MSG__
+
+
+/*
+	Host->device messages sent on the global control endpoint:
+
+	portNumber	message
+	----------	--------------------
+	0,1,2,3		portControlMessage
+	0x80		globalControlMessage
+*/
+
+struct keyspan_usa49_portControlMessage
+{
+	/*
+		0.	0/1/2/3 	port control message follows
+			0x80 set	non-port control message follows
+	*/
+	u8	portNumber,
+
+	/*
+		there are three types of "commands" sent in the control message:
+
+		1.	configuration changes which must be requested by setting
+			the corresponding "set" flag (and should only be requested
+			when necessary, to reduce overhead on the USA26):
+	*/
+		setClocking,	// host requests baud rate be set
+		baudLo,			// host does baud divisor calculation
+		baudHi,			// baudHi is only used for first port (gives lower rates)
+		prescaler,		// specified as N/8; values 8-ff are valid
+						// must be set any time internal baud rate is set;
+		txClocking,		// 0=internal, 1=external/DSR
+		rxClocking,		// 0=internal, 1=external/DSR
+
+		setLcr,			// host requests lcr be set
+		lcr,			// use PARITY, STOPBITS, DATABITS below
+
+		setFlowControl,	// host requests flow control be set
+		ctsFlowControl,	// 1=use CTS flow control, 0=don't
+		xonFlowControl,	// 1=use XON/XOFF flow control, 0=don't
+		xonChar,		// specified in current character format
+		xoffChar,		// specified in current character format
+
+		setRts,			// host requests RTS output be set
+		rts,			// 1=active, 0=inactive
+
+		setDtr,			// host requests DTR output be set
+		dtr;			// 1=on, 0=off
+
+
+	/*
+		3.	configuration data which is simply used as is (no overhead,
+			but must be specified correctly in every host message).
+	*/
+	u8	forwardingLength,  // forward when this number of chars available
+		dsrFlowControl,	// 1=use DSR flow control, 0=don't
+		txAckThreshold,	// 0=not allowed, 1=normal, 2-255 deliver ACK faster
+		loopbackMode;	// 0=no loopback, 1=loopback enabled
+
+	/*
+		4.	commands which are flags only; these are processed in order
+			(so that, e.g., if both _txOn and _txOff flags are set, the
+			port ends in a TX_OFF state); any non-zero value is respected
+	*/
+	u8	_txOn,			// enable transmitting (and continue if there's data)
+		_txOff,			// stop transmitting
+		txFlush,		// toss outbound data
+		txBreak,		// turn on break (cleared by _txOn)
+		rxOn,			// turn on receiver
+		rxOff,			// turn off receiver
+		rxFlush,		// toss inbound data
+		rxForward,		// forward all inbound data, NOW (as if fwdLen==1)
+		returnStatus,	// return current status (even if it hasn't changed)
+		resetDataToggle,// reset data toggle state to DATA0
+		enablePort,		// start servicing port (move data, check status)
+		disablePort;	// stop servicing port (does implicit tx/rx flush/off)
+	
+};
+
+// defines for bits in lcr
+#define	USA_DATABITS_5		0x00
+#define	USA_DATABITS_6		0x01
+#define	USA_DATABITS_7		0x02
+#define	USA_DATABITS_8		0x03
+#define	STOPBITS_5678_1		0x00	// 1 stop bit for all byte sizes
+#define	STOPBITS_5_1p5		0x04	// 1.5 stop bits for 5-bit byte
+#define	STOPBITS_678_2		0x04	// 2 stop bits for 6/7/8-bit byte
+#define	USA_PARITY_NONE		0x00
+#define	USA_PARITY_ODD		0x08
+#define	USA_PARITY_EVEN		0x18
+#define	PARITY_1			0x28
+#define	PARITY_0			0x38
+
+/*
+	during normal operation, status messages are returned 
+	to the host whenever the board detects changes.  In some
+	circumstances (e.g. Windows), status messages from the
+	device cause problems; to shut them off, the host issues
+	a control message with the disableStatusMessages flags
+	set (to any non-zero value).  The device will respond to
+	this message, and then suppress further status messages;
+	it will resume sending status messages any time the host
+	sends any control message (either global or port-specific).
+*/
+
+struct keyspan_usa49_globalControlMessage
+{
+	u8	portNumber,			// 0x80
+		sendGlobalStatus,	// 1/2=number of status responses requested
+		resetStatusToggle,	// 1=reset global status toggle
+		resetStatusCount,	// a cycling value
+		remoteWakeupEnable,		// 0x10=P1, 0x20=P2, 0x40=P3, 0x80=P4
+		disableStatusMessages;	// 1=send no status until host talks
+};
+
+/*
+	Device->host messages send on the global status endpoint
+
+	portNumber			message
+	----------			--------------------
+	0x00,0x01,0x02,0x03	portStatusMessage
+	0x80				globalStatusMessage
+	0x81				globalDebugMessage
+*/
+
+struct keyspan_usa49_portStatusMessage	// one for each port
+{
+	u8	portNumber,		// 0,1,2,3
+		cts,			// reports CTS pin
+		dcd,			// reports DCD pin
+		dsr,			// reports DSR pin
+		ri,				// reports RI pin
+		_txOff,			// transmit has been disabled (by host)
+		_txXoff,		// transmit is in XOFF state (either host or RX XOFF)
+		rxEnabled,		// as configured by rxOn/rxOff 1=on, 0=off
+		controlResponse,// 1=a control message has been processed
+		txAck,			// ACK (data TX complete)
+		rs232valid;		// RS-232 signal valid
+};
+
+// bits in RX data message when STAT byte is included
+#define	RXERROR_OVERRUN	0x02
+#define	RXERROR_PARITY	0x04
+#define	RXERROR_FRAMING	0x08
+#define	RXERROR_BREAK	0x10
+
+struct keyspan_usa49_globalStatusMessage
+{
+	u8	portNumber,			// 0x80=globalStatusMessage
+		sendGlobalStatus,	// from request, decremented
+		resetStatusCount;	// as in request
+};
+
+struct keyspan_usa49_globalDebugMessage
+{
+	u8	portNumber,			// 0x81=globalDebugMessage
+		n,					// typically a count/status byte
+		b;					// typically a data byte
+};
+
+// ie: the maximum length of an EZUSB endpoint buffer
+#define	MAX_DATA_LEN			64
+
+// update status approx. 60 times a second (16.6666 ms)
+#define	STATUS_UPDATE_INTERVAL	16
+
+// status rationing tuning value (each port gets checked each n ms)
+#define	STATUS_RATION	10
+
+#endif
diff --git a/drivers/usb/serial/keyspan_usa67msg.h b/drivers/usb/serial/keyspan_usa67msg.h
new file mode 100644
index 000000000..dcf502fdb
--- /dev/null
+++ b/drivers/usb/serial/keyspan_usa67msg.h
@@ -0,0 +1,255 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+	usa67msg.h
+
+	Copyright (c) 1998-2007 InnoSys Incorporated.  All Rights Reserved
+	This file is available under a BSD-style copyright
+
+	Keyspan USB Async Firmware to run on Anchor FX1
+
+	Redistribution and use in source and binary forms, with or without
+	modification, are permitted provided that the following conditions are
+	met:
+
+	1. Redistributions of source code must retain this licence text
+   	without modification, this list of conditions, and the following
+   	disclaimer.  The following copyright notice must appear immediately at
+   	the beginning of all source files:
+
+        	Copyright (c) 1998-2007 InnoSys Incorporated.  All Rights Reserved
+
+        	This file is available under a BSD-style copyright
+
+	2. Redistributions in binary form must reproduce the above copyright
+   	notice, this list of conditions and the following disclaimer in the
+   	documentation and/or other materials provided with the distribution.
+
+	3. The name of InnoSys Incorprated may not be used to endorse or promote
+   	products derived from this software without specific prior written
+   	permission.
+
+	THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR
+	IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+	OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+	NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+	INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+	(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+	SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+	CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+	LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+	OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+	SUCH DAMAGE.
+
+	Fourth revision: This message format supports the USA28XG
+
+	Buffer formats for RX/TX data messages are not defined by
+	a structure, but are described here:
+
+	USB OUT (host -> USAxx, transmit) messages contain a
+	REQUEST_ACK indicator (set to 0xff to request an ACK at the
+	completion of transmit; 0x00 otherwise), followed by data:
+
+		RQSTACK DAT DAT DAT ...
+
+	with a total data length of up to 63.
+
+	USB IN (USAxx -> host, receive) messages begin with a status
+	byte in which the 0x80 bit is either:
+
+		(a)	0x80 bit clear
+			indicates that the bytes following it are all data
+			bytes:
+
+				STAT DATA DATA DATA DATA DATA ...
+
+			for a total of up to 63 DATA bytes,
+
+	or:
+
+		(b)	0x80 bit set
+			indiates that the bytes following alternate data and
+			status bytes:
+
+				STAT DATA STAT DATA STAT DATA STAT DATA ...
+
+			for a total of up to 32 DATA bytes.
+
+	The valid bits in the STAT bytes are:
+
+		OVERRUN	0x02
+		PARITY	0x04
+		FRAMING	0x08
+		BREAK	0x10
+
+	Notes:
+
+	(1) The OVERRUN bit can appear in either (a) or (b) format
+		messages, but the but the PARITY/FRAMING/BREAK bits
+		only appear in (b) format messages.
+	(2) For the host to determine the exact point at which the
+		overrun occurred (to identify the point in the data
+		stream at which the data was lost), it needs to count
+		128 characters, starting at the first character of the
+		message in which OVERRUN was reported; the lost character(s)
+		would have been received between the 128th and 129th
+		characters.
+	(3)	An RX data message in which the first byte has 0x80 clear
+		serves as a "break off" indicator.
+
+	revision history:
+
+	1999feb10	add reportHskiaChanges to allow us to ignore them
+	1999feb10	add txAckThreshold for fast+loose throughput enhancement
+	1999mar30	beef up support for RX error reporting
+	1999apr14	add resetDataToggle to control message
+	2000jan04	merge with usa17msg.h
+	2000jun01	add extended BSD-style copyright text
+	2001jul05	change message format to improve OVERRUN case
+	2002jun05	update copyright date, improve comments
+	2006feb06	modify for FX1 chip
+
+*/
+
+#ifndef	__USA67MSG__
+#define	__USA67MSG__
+
+
+// all things called "ControlMessage" are sent on the 'control' endpoint
+
+typedef struct keyspan_usa67_portControlMessage
+{
+	u8	port;		// 0 or 1 (selects port)
+	/*
+		there are three types of "commands" sent in the control message:
+
+		1.	configuration changes which must be requested by setting
+			the corresponding "set" flag (and should only be requested
+			when necessary, to reduce overhead on the device):
+	*/
+	u8	setClocking,	// host requests baud rate be set
+		baudLo,			// host does baud divisor calculation
+		baudHi,			// baudHi is only used for first port (gives lower rates)
+		externalClock_txClocking,
+						// 0=internal, other=external
+
+		setLcr,			// host requests lcr be set
+		lcr,			// use PARITY, STOPBITS, DATABITS below
+
+		setFlowControl,	// host requests flow control be set
+		ctsFlowControl,	// 1=use CTS flow control, 0=don't
+		xonFlowControl,	// 1=use XON/XOFF flow control, 0=don't
+		xonChar,		// specified in current character format
+		xoffChar,		// specified in current character format
+
+		setTxTriState_setRts,
+						// host requests TX tri-state be set
+		txTriState_rts,	// 1=active (normal), 0=tristate (off)
+
+		setHskoa_setDtr,
+						// host requests HSKOA output be set
+		hskoa_dtr,		// 1=on, 0=off
+
+		setPrescaler,	// host requests prescalar be set (default: 13)
+		prescaler;		// specified as N/8; values 8-ff are valid
+						// must be set any time internal baud rate is set;
+						// must not be set when external clocking is used
+
+	/*
+		3.	configuration data which is simply used as is (no overhead,
+			but must be specified correctly in every host message).
+	*/
+	u8	forwardingLength,  // forward when this number of chars available
+		reportHskiaChanges_dsrFlowControl,
+						// 1=normal; 0=ignore external clock
+						// 1=use DSR flow control, 0=don't
+		txAckThreshold,	// 0=not allowed, 1=normal, 2-255 deliver ACK faster
+		loopbackMode;	// 0=no loopback, 1=loopback enabled
+
+	/*
+		4.	commands which are flags only; these are processed in order
+			(so that, e.g., if both _txOn and _txOff flags are set, the
+			port ends in a TX_OFF state); any non-zero value is respected
+	*/
+	u8	_txOn,			// enable transmitting (and continue if there's data)
+		_txOff,			// stop transmitting
+		txFlush,		// toss outbound data
+		txBreak,		// turn on break (cleared by _txOn)
+		rxOn,			// turn on receiver
+		rxOff,			// turn off receiver
+		rxFlush,		// toss inbound data
+		rxForward,		// forward all inbound data, NOW (as if fwdLen==1)
+		returnStatus,	// return current status (even if it hasn't changed)
+		resetDataToggle;// reset data toggle state to DATA0
+
+} keyspan_usa67_portControlMessage;
+
+// defines for bits in lcr
+#define	USA_DATABITS_5		0x00
+#define	USA_DATABITS_6		0x01
+#define	USA_DATABITS_7		0x02
+#define	USA_DATABITS_8		0x03
+#define	STOPBITS_5678_1		0x00	// 1 stop bit for all byte sizes
+#define	STOPBITS_5_1p5		0x04	// 1.5 stop bits for 5-bit byte
+#define	STOPBITS_678_2		0x04	// 2 stop bits for 6/7/8-bit byte
+#define	USA_PARITY_NONE		0x00
+#define	USA_PARITY_ODD		0x08
+#define	USA_PARITY_EVEN		0x18
+#define	PARITY_1			0x28
+#define	PARITY_0			0x38
+
+// all things called "StatusMessage" are sent on the status endpoint
+
+typedef struct keyspan_usa67_portStatusMessage	// one for each port
+{
+	u8	port,			// 0=first, 1=second, other=see below
+		hskia_cts,		// reports HSKIA pin
+		gpia_dcd,		// reports GPIA pin
+		_txOff,			// port has been disabled (by host)
+		_txXoff,		// port is in XOFF state (either host or RX XOFF)
+		txAck,			// indicates a TX message acknowledgement
+		rxEnabled,		// as configured by rxOn/rxOff 1=on, 0=off
+		controlResponse;// 1=a control message has been processed
+} keyspan_usa67_portStatusMessage;
+
+// bits in RX data message when STAT byte is included
+#define	RXERROR_OVERRUN	0x02
+#define	RXERROR_PARITY	0x04
+#define	RXERROR_FRAMING	0x08
+#define	RXERROR_BREAK	0x10
+
+typedef struct keyspan_usa67_globalControlMessage
+{
+	u8	port,	 			// 3
+		sendGlobalStatus,	// 2=request for two status responses
+		resetStatusToggle,	// 1=reset global status toggle
+		resetStatusCount;	// a cycling value
+} keyspan_usa67_globalControlMessage;
+
+typedef struct keyspan_usa67_globalStatusMessage
+{
+	u8	port,				// 3
+		sendGlobalStatus,	// from request, decremented
+		resetStatusCount;	// as in request
+} keyspan_usa67_globalStatusMessage;
+
+typedef struct keyspan_usa67_globalDebugMessage
+{
+	u8	port,				// 2
+		a,
+		b,
+		c,
+		d;
+} keyspan_usa67_globalDebugMessage;
+
+// ie: the maximum length of an FX1 endpoint buffer
+#define	MAX_DATA_LEN			64
+
+// update status approx. 60 times a second (16.6666 ms)
+#define	STATUS_UPDATE_INTERVAL	16
+
+// status rationing tuning value (each port gets checked each n ms)
+#define	STATUS_RATION	10
+
+#endif
+
+
diff --git a/drivers/usb/serial/keyspan_usa90msg.h b/drivers/usb/serial/keyspan_usa90msg.h
new file mode 100644
index 000000000..c4ca0f631
--- /dev/null
+++ b/drivers/usb/serial/keyspan_usa90msg.h
@@ -0,0 +1,199 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+	usa90msg.h
+
+	Copyright (c) 1998-2003 InnoSys Incorporated.  All Rights Reserved
+	This file is available under a BSD-style copyright
+
+	Keyspan USB Async Message Formats for the USA19HS
+
+	Redistribution and use in source and binary forms, with or without
+	modification, are permitted provided that the following conditions are
+	met:
+
+	1. Redistributions of source code must retain this licence text
+   	without modification, this list of conditions, and the following
+   	disclaimer.  The following copyright notice must appear immediately at
+   	the beginning of all source files:
+
+        	Copyright (c) 1998-2003 InnoSys Incorporated.  All Rights Reserved
+
+        	This file is available under a BSD-style copyright
+
+	2. The name of InnoSys Incorporated may not be used to endorse or promote
+   	products derived from this software without specific prior written
+   	permission.
+
+	THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR
+	IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+	OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+	NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+	INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+	(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+	SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+	CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+	LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+	OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+	SUCH DAMAGE.    
+
+	Revisions:
+
+	2003feb14		add setTxMode/txMode  and cancelRxXoff to portControl
+	2003mar21		change name of PARITY_0/1 to add MARK/SPACE
+*/
+
+#ifndef	__USA90MSG__
+#define	__USA90MSG__
+
+struct keyspan_usa90_portControlMessage
+{
+	/*
+		there are three types of "commands" sent in the control message:
+
+		1.	configuration changes which must be requested by setting
+			the corresponding "set" flag (and should only be requested
+			when necessary, to reduce overhead on the device):
+	*/
+
+	u8	setClocking,	// host requests baud rate be set
+		baudLo,			// host does baud divisor calculation
+		baudHi,			// host does baud divisor calculation 
+		
+		setLcr,			// host requests lcr be set
+		lcr,			// use PARITY, STOPBITS, DATABITS below
+		
+		setRxMode,		// set receive mode
+		rxMode,			// RXMODE_DMA or RXMODE_BYHAND
+
+		setTxMode,		// set transmit mode
+		txMode,			// TXMODE_DMA or TXMODE_BYHAND
+
+		setTxFlowControl,	// host requests tx flow control be set
+		txFlowControl	,	// use TX_FLOW... bits below
+		setRxFlowControl,	// host requests rx flow control be set
+		rxFlowControl,	// use RX_FLOW... bits below
+		sendXoff,		// host requests XOFF transmitted immediately
+		sendXon,		// host requests XON char transmitted
+		xonChar,		// specified in current character format
+		xoffChar,		// specified in current character format
+
+		sendChar,		// host requests char transmitted immediately
+		txChar,			// character to send
+
+		setRts,			// host requests RTS output be set
+		rts,			// 1=on, 0=off
+		setDtr, 		// host requests DTR output be set
+		dtr;			// 1=on, 0=off
+
+	
+	/*
+		2.	configuration data which is simply used as is 
+			and must be specified correctly in every host message.
+	*/
+
+	u8	rxForwardingLength,  // forward when this number of chars available
+		rxForwardingTimeout, // (1-31 in ms)
+		txAckSetting;	   // 0=don't ack, 1=normal, 2-255 TBD...
+	/*
+		3.	Firmware states which cause actions if they change					
+		and must be specified correctly in every host message.
+	*/
+
+	u8	portEnabled,	// 0=disabled, 1=enabled
+		txFlush,		// 0=normal, 1=toss outbound data
+		txBreak,		// 0=break off, 1=break on
+		loopbackMode;	// 0=no loopback, 1=loopback enabled
+
+	/*
+		4.	commands which are flags only; these are processed in order
+			(so that, e.g., if rxFlush and rxForward flags are set, the
+			port will have no data to forward); any non-zero value 
+			is respected
+	*/
+
+	u8	rxFlush,		// toss inbound data
+		rxForward,		// forward all inbound data, NOW (as if fwdLen==1)
+		cancelRxXoff,	// cancel any receive XOFF state (_txXoff)
+		returnStatus;	// return current status NOW
+};
+
+// defines for bits in lcr
+#define		USA_DATABITS_5		0x00
+#define		USA_DATABITS_6		0x01
+#define		USA_DATABITS_7		0x02
+#define		USA_DATABITS_8		0x03
+#define		STOPBITS_5678_1		0x00	// 1 stop bit for all byte sizes
+#define		STOPBITS_5_1p5		0x04	// 1.5 stop bits for 5-bit byte
+#define		STOPBITS_678_2		0x04	// 2 stop bits for 6-8 bit byte
+#define		USA_PARITY_NONE		0x00
+#define		USA_PARITY_ODD		0x08
+#define		USA_PARITY_EVEN		0x18
+#define		PARITY_MARK_1  		0x28   	// force parity MARK
+#define		PARITY_SPACE_0 		0x38	// force parity SPACE
+
+#define		TXFLOW_CTS			0x04	
+#define		TXFLOW_DSR			0x08
+#define		TXFLOW_XOFF			0x01	
+#define		TXFLOW_XOFF_ANY		0x02	
+#define		TXFLOW_XOFF_BITS	(TXFLOW_XOFF | TXFLOW_XOFF_ANY)
+
+#define		RXFLOW_XOFF			0x10	
+#define		RXFLOW_RTS			0x20	
+#define		RXFLOW_DTR			0x40
+#define		RXFLOW_DSR_SENSITIVITY	0x80
+
+#define		RXMODE_BYHAND		0x00	
+#define		RXMODE_DMA			0x02	
+
+#define		TXMODE_BYHAND		0x00	
+#define		TXMODE_DMA			0x02	
+
+
+// all things called "StatusMessage" are sent on the status endpoint
+
+struct keyspan_usa90_portStatusMessage	
+{
+	u8	msr,			// reports the actual MSR register
+		cts,			// reports CTS pin
+		dcd,			// reports DCD pin
+		dsr,			// reports DSR pin
+		ri,				// reports RI pin
+		_txXoff,		// port is in XOFF state (we received XOFF)
+		rxBreak,		// reports break state
+		rxOverrun,		// count of overrun errors (since last reported)
+		rxParity,		// count of parity errors (since last reported)
+		rxFrame,		// count of frame errors (since last reported)
+		portState,		// PORTSTATE_xxx bits (useful for debugging)
+		messageAck,		// message acknowledgement
+		charAck,		// character acknowledgement
+		controlResponse;	// (value = returnStatus) a control message has been processed 
+};
+
+// bits in RX data message when STAT byte is included
+
+#define	RXERROR_OVERRUN		0x02
+#define	RXERROR_PARITY		0x04
+#define	RXERROR_FRAMING		0x08
+#define	RXERROR_BREAK		0x10
+
+#define	PORTSTATE_ENABLED	0x80
+#define	PORTSTATE_TXFLUSH	0x01
+#define	PORTSTATE_TXBREAK	0x02
+#define	PORTSTATE_LOOPBACK 	0x04
+
+// MSR bits
+
+#define USA_MSR_dCTS	  		0x01		// CTS has changed since last report	
+#define USA_MSR_dDSR	  		0x02
+#define USA_MSR_dRI			0x04
+#define USA_MSR_dDCD	  		0x08
+
+#define USA_MSR_CTS			0x10	  	// current state of CTS
+#define USA_MSR_DSR			0x20
+#define USA_USA_MSR_RI			0x40
+#define MSR_DCD				0x80
+
+// ie: the maximum length of an endpoint buffer
+#define		MAX_DATA_LEN			64
+
+#endif
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
new file mode 100644
index 000000000..394b3189e
--- /dev/null
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -0,0 +1,515 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * KLSI KL5KUSB105 chip RS232 converter driver
+ *
+ *   Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
+ *   Copyright (C) 2001 Utz-Uwe Haus <haus@uuhaus.de>
+ *
+ * All information about the device was acquired using SniffUSB ans snoopUSB
+ * on Windows98.
+ * It was written out of frustration with the PalmConnect USB Serial adapter
+ * sold by Palm Inc.
+ * Neither Palm, nor their contractor (MCCI) or their supplier (KLSI) provided
+ * information that was not already available.
+ *
+ * It seems that KLSI bought some silicon-design information from ScanLogic,
+ * whose SL11R processor is at the core of the KL5KUSB chipset from KLSI.
+ * KLSI has firmware available for their devices; it is probable that the
+ * firmware differs from that used by KLSI in their products. If you have an
+ * original KLSI device and can provide some information on it, I would be
+ * most interested in adding support for it here. If you have any information
+ * on the protocol used (or find errors in my reverse-engineered stuff), please
+ * let me know.
+ *
+ * The code was only tested with a PalmConnect USB adapter; if you
+ * are adventurous, try it with any KLSI-based device and let me know how it
+ * breaks so that I can fix it!
+ */
+
+/* TODO:
+ *	check modem line signals
+ *	implement handshaking or decide that we do not support it
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <asm/unaligned.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include "kl5kusb105.h"
+
+#define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>, Johan Hovold <jhovold@gmail.com>"
+#define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver"
+
+
+/*
+ * Function prototypes
+ */
+static int klsi_105_port_probe(struct usb_serial_port *port);
+static void klsi_105_port_remove(struct usb_serial_port *port);
+static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port);
+static void klsi_105_close(struct usb_serial_port *port);
+static void klsi_105_set_termios(struct tty_struct *tty,
+				 struct usb_serial_port *port,
+				 const struct ktermios *old_termios);
+static int  klsi_105_tiocmget(struct tty_struct *tty);
+static void klsi_105_process_read_urb(struct urb *urb);
+static int klsi_105_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size);
+
+/*
+ * All of the device info needed for the KLSI converters.
+ */
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) },
+	{ }		/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_serial_driver kl5kusb105d_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"kl5kusb105d",
+	},
+	.description =		"KL5KUSB105D / PalmConnect",
+	.id_table =		id_table,
+	.num_ports =		1,
+	.bulk_out_size =	64,
+	.open =			klsi_105_open,
+	.close =		klsi_105_close,
+	.set_termios =		klsi_105_set_termios,
+	.tiocmget =		klsi_105_tiocmget,
+	.port_probe =		klsi_105_port_probe,
+	.port_remove =		klsi_105_port_remove,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+	.process_read_urb =	klsi_105_process_read_urb,
+	.prepare_write_buffer =	klsi_105_prepare_write_buffer,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&kl5kusb105d_device, NULL
+};
+
+struct klsi_105_port_settings {
+	u8	pktlen;		/* always 5, it seems */
+	u8	baudrate;
+	u8	databits;
+	u8	unknown1;
+	u8	unknown2;
+};
+
+struct klsi_105_private {
+	struct klsi_105_port_settings	cfg;
+	unsigned long			line_state; /* modem line settings */
+	spinlock_t			lock;
+};
+
+
+/*
+ * Handle vendor specific USB requests
+ */
+
+
+#define KLSI_TIMEOUT	 5000 /* default urb timeout */
+
+static int klsi_105_chg_port_settings(struct usb_serial_port *port,
+				      struct klsi_105_port_settings *settings)
+{
+	int rc;
+
+	rc = usb_control_msg_send(port->serial->dev,
+				  0,
+				  KL5KUSB105A_SIO_SET_DATA,
+				  USB_TYPE_VENDOR | USB_DIR_OUT |
+				  USB_RECIP_INTERFACE,
+				  0, /* value */
+				  0, /* index */
+				  settings,
+				  sizeof(struct klsi_105_port_settings),
+				  KLSI_TIMEOUT,
+				  GFP_KERNEL);
+	if (rc)
+		dev_err(&port->dev,
+			"Change port settings failed (error = %d)\n", rc);
+
+	dev_dbg(&port->dev,
+		"pktlen %u, baudrate 0x%02x, databits %u, u1 %u, u2 %u\n",
+		settings->pktlen, settings->baudrate, settings->databits,
+		settings->unknown1, settings->unknown2);
+
+	return rc;
+}
+
+/*
+ * Read line control via vendor command and return result through
+ * the state pointer.
+ */
+static int klsi_105_get_line_state(struct usb_serial_port *port,
+				   unsigned long *state)
+{
+	u16 status;
+	int rc;
+
+	rc = usb_control_msg_recv(port->serial->dev, 0,
+				  KL5KUSB105A_SIO_POLL,
+				  USB_TYPE_VENDOR | USB_DIR_IN,
+				  0, /* value */
+				  0, /* index */
+				  &status, sizeof(status),
+				  10000,
+				  GFP_KERNEL);
+	if (rc) {
+		dev_err(&port->dev, "reading line status failed: %d\n", rc);
+		return rc;
+	}
+
+	le16_to_cpus(&status);
+
+	dev_dbg(&port->dev, "read status %04x\n", status);
+
+	*state = ((status & KL5KUSB105A_DSR) ? TIOCM_DSR : 0) |
+		 ((status & KL5KUSB105A_CTS) ? TIOCM_CTS : 0);
+
+	return 0;
+}
+
+
+/*
+ * Driver's tty interface functions
+ */
+
+static int klsi_105_port_probe(struct usb_serial_port *port)
+{
+	struct klsi_105_private *priv;
+
+	priv = kmalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* set initial values for control structures */
+	priv->cfg.pktlen    = 5;
+	priv->cfg.baudrate  = kl5kusb105a_sio_b9600;
+	priv->cfg.databits  = kl5kusb105a_dtb_8;
+	priv->cfg.unknown1  = 0;
+	priv->cfg.unknown2  = 1;
+
+	priv->line_state    = 0;
+
+	spin_lock_init(&priv->lock);
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
+}
+
+static void klsi_105_port_remove(struct usb_serial_port *port)
+{
+	struct klsi_105_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+}
+
+static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct klsi_105_private *priv = usb_get_serial_port_data(port);
+	int retval = 0;
+	int rc;
+	unsigned long line_state;
+	struct klsi_105_port_settings cfg;
+	unsigned long flags;
+
+	/* Do a defined restart:
+	 * Set up sane default baud rate and send the 'READ_ON'
+	 * vendor command.
+	 * FIXME: set modem line control (how?)
+	 * Then read the modem line control and store values in
+	 * priv->line_state.
+	 */
+
+	cfg.pktlen   = 5;
+	cfg.baudrate = kl5kusb105a_sio_b9600;
+	cfg.databits = kl5kusb105a_dtb_8;
+	cfg.unknown1 = 0;
+	cfg.unknown2 = 1;
+	klsi_105_chg_port_settings(port, &cfg);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->cfg.pktlen   = cfg.pktlen;
+	priv->cfg.baudrate = cfg.baudrate;
+	priv->cfg.databits = cfg.databits;
+	priv->cfg.unknown1 = cfg.unknown1;
+	priv->cfg.unknown2 = cfg.unknown2;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/* READ_ON and urb submission */
+	rc = usb_serial_generic_open(tty, port);
+	if (rc)
+		return rc;
+
+	rc = usb_control_msg(port->serial->dev,
+			     usb_sndctrlpipe(port->serial->dev, 0),
+			     KL5KUSB105A_SIO_CONFIGURE,
+			     USB_TYPE_VENDOR|USB_DIR_OUT|USB_RECIP_INTERFACE,
+			     KL5KUSB105A_SIO_CONFIGURE_READ_ON,
+			     0, /* index */
+			     NULL,
+			     0,
+			     KLSI_TIMEOUT);
+	if (rc < 0) {
+		dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc);
+		retval = rc;
+		goto err_generic_close;
+	} else
+		dev_dbg(&port->dev, "%s - enabled reading\n", __func__);
+
+	rc = klsi_105_get_line_state(port, &line_state);
+	if (rc < 0) {
+		retval = rc;
+		goto err_disable_read;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->line_state = line_state;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__,
+			line_state);
+
+	return 0;
+
+err_disable_read:
+	usb_control_msg(port->serial->dev,
+			     usb_sndctrlpipe(port->serial->dev, 0),
+			     KL5KUSB105A_SIO_CONFIGURE,
+			     USB_TYPE_VENDOR | USB_DIR_OUT,
+			     KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
+			     0, /* index */
+			     NULL, 0,
+			     KLSI_TIMEOUT);
+err_generic_close:
+	usb_serial_generic_close(port);
+
+	return retval;
+}
+
+static void klsi_105_close(struct usb_serial_port *port)
+{
+	int rc;
+
+	/* send READ_OFF */
+	rc = usb_control_msg(port->serial->dev,
+			     usb_sndctrlpipe(port->serial->dev, 0),
+			     KL5KUSB105A_SIO_CONFIGURE,
+			     USB_TYPE_VENDOR | USB_DIR_OUT,
+			     KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
+			     0, /* index */
+			     NULL, 0,
+			     KLSI_TIMEOUT);
+	if (rc < 0)
+		dev_err(&port->dev, "failed to disable read: %d\n", rc);
+
+	/* shutdown our bulk reads and writes */
+	usb_serial_generic_close(port);
+}
+
+/* We need to write a complete 64-byte data block and encode the
+ * number actually sent in the first double-byte, LSB-order. That
+ * leaves at most 62 bytes of payload.
+ */
+#define KLSI_HDR_LEN		2
+static int klsi_105_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
+{
+	unsigned char *buf = dest;
+	int count;
+
+	count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size,
+								&port->lock);
+	put_unaligned_le16(count, buf);
+
+	return count + KLSI_HDR_LEN;
+}
+
+/* The data received is preceded by a length double-byte in LSB-first order.
+ */
+static void klsi_105_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	unsigned len;
+
+	/* empty urbs seem to happen, we ignore them */
+	if (!urb->actual_length)
+		return;
+
+	if (urb->actual_length <= KLSI_HDR_LEN) {
+		dev_dbg(&port->dev, "%s - malformed packet\n", __func__);
+		return;
+	}
+
+	len = get_unaligned_le16(data);
+	if (len > urb->actual_length - KLSI_HDR_LEN) {
+		dev_dbg(&port->dev, "%s - packet length mismatch\n", __func__);
+		len = urb->actual_length - KLSI_HDR_LEN;
+	}
+
+	tty_insert_flip_string(&port->port, data + KLSI_HDR_LEN, len);
+	tty_flip_buffer_push(&port->port);
+}
+
+static void klsi_105_set_termios(struct tty_struct *tty,
+				 struct usb_serial_port *port,
+				 const struct ktermios *old_termios)
+{
+	struct klsi_105_private *priv = usb_get_serial_port_data(port);
+	struct device *dev = &port->dev;
+	unsigned int iflag = tty->termios.c_iflag;
+	unsigned int old_iflag = old_termios->c_iflag;
+	unsigned int cflag = tty->termios.c_cflag;
+	unsigned int old_cflag = old_termios->c_cflag;
+	struct klsi_105_port_settings *cfg;
+	unsigned long flags;
+	speed_t baud;
+
+	cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
+	if (!cfg)
+		return;
+
+	/* lock while we are modifying the settings */
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/*
+	 * Update baud rate
+	 */
+	baud = tty_get_baud_rate(tty);
+
+	switch (baud) {
+	case 0: /* handled below */
+		break;
+	case 1200:
+		priv->cfg.baudrate = kl5kusb105a_sio_b1200;
+		break;
+	case 2400:
+		priv->cfg.baudrate = kl5kusb105a_sio_b2400;
+		break;
+	case 4800:
+		priv->cfg.baudrate = kl5kusb105a_sio_b4800;
+		break;
+	case 9600:
+		priv->cfg.baudrate = kl5kusb105a_sio_b9600;
+		break;
+	case 19200:
+		priv->cfg.baudrate = kl5kusb105a_sio_b19200;
+		break;
+	case 38400:
+		priv->cfg.baudrate = kl5kusb105a_sio_b38400;
+		break;
+	case 57600:
+		priv->cfg.baudrate = kl5kusb105a_sio_b57600;
+		break;
+	case 115200:
+		priv->cfg.baudrate = kl5kusb105a_sio_b115200;
+		break;
+	default:
+		dev_dbg(dev, "unsupported baudrate, using 9600\n");
+		priv->cfg.baudrate = kl5kusb105a_sio_b9600;
+		baud = 9600;
+		break;
+	}
+
+	/*
+	 * FIXME: implement B0 handling
+	 *
+	 * Maybe this should be simulated by sending read disable and read
+	 * enable messages?
+	 */
+
+	tty_encode_baud_rate(tty, baud, baud);
+
+	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
+		/* set the number of data bits */
+		switch (cflag & CSIZE) {
+		case CS5:
+			dev_dbg(dev, "%s - 5 bits/byte not supported\n", __func__);
+			spin_unlock_irqrestore(&priv->lock, flags);
+			goto err;
+		case CS6:
+			dev_dbg(dev, "%s - 6 bits/byte not supported\n", __func__);
+			spin_unlock_irqrestore(&priv->lock, flags);
+			goto err;
+		case CS7:
+			priv->cfg.databits = kl5kusb105a_dtb_7;
+			break;
+		case CS8:
+			priv->cfg.databits = kl5kusb105a_dtb_8;
+			break;
+		default:
+			dev_err(dev, "CSIZE was not CS5-CS8, using default of 8\n");
+			priv->cfg.databits = kl5kusb105a_dtb_8;
+			break;
+		}
+	}
+
+	/*
+	 * Update line control register (LCR)
+	 */
+	if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))
+	    || (cflag & CSTOPB) != (old_cflag & CSTOPB)) {
+		/* Not currently supported */
+		tty->termios.c_cflag &= ~(PARENB|PARODD|CSTOPB);
+	}
+	/*
+	 * Set flow control: well, I do not really now how to handle DTR/RTS.
+	 * Just do what we have seen with SniffUSB on Win98.
+	 */
+	if ((iflag & IXOFF) != (old_iflag & IXOFF)
+	    || (iflag & IXON) != (old_iflag & IXON)
+	    ||  (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
+		/* Not currently supported */
+		tty->termios.c_cflag &= ~CRTSCTS;
+	}
+	memcpy(cfg, &priv->cfg, sizeof(*cfg));
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/* now commit changes to device */
+	klsi_105_chg_port_settings(port, cfg);
+err:
+	kfree(cfg);
+}
+
+static int klsi_105_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct klsi_105_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	int rc;
+	unsigned long line_state;
+
+	rc = klsi_105_get_line_state(port, &line_state);
+	if (rc < 0) {
+		dev_err(&port->dev,
+			"Reading line control failed (error = %d)\n", rc);
+		/* better return value? EAGAIN? */
+		return rc;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->line_state = line_state;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state);
+	return (int)line_state;
+}
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/kl5kusb105.h b/drivers/usb/serial/kl5kusb105.h
new file mode 100644
index 000000000..dbe98d85c
--- /dev/null
+++ b/drivers/usb/serial/kl5kusb105.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Definitions for the KLSI KL5KUSB105 serial port adapter
+ */
+
+/* vendor/product pairs that are known to contain this chipset */
+#define PALMCONNECT_VID		0x0830
+#define PALMCONNECT_PID		0x0080
+
+/* Vendor commands: */
+
+
+/* port table -- the chip supports up to 4 channels */
+
+/* baud rates */
+
+enum {
+	kl5kusb105a_sio_b115200 = 0,
+	kl5kusb105a_sio_b57600  = 1,
+	kl5kusb105a_sio_b38400  = 2,
+	kl5kusb105a_sio_b19200  = 4,
+	kl5kusb105a_sio_b14400  = 5,
+	kl5kusb105a_sio_b9600   = 6,
+	kl5kusb105a_sio_b4800   = 8,	/* unchecked */
+	kl5kusb105a_sio_b2400   = 9,	/* unchecked */
+	kl5kusb105a_sio_b1200   = 0xa,	/* unchecked */
+	kl5kusb105a_sio_b600    = 0xb	/* unchecked */
+};
+
+/* data bits */
+#define kl5kusb105a_dtb_7   7
+#define kl5kusb105a_dtb_8   8
+
+
+
+/* requests: */
+#define KL5KUSB105A_SIO_SET_DATA  1
+#define KL5KUSB105A_SIO_POLL      2
+#define KL5KUSB105A_SIO_CONFIGURE      3
+/* values used for request KL5KUSB105A_SIO_CONFIGURE */
+#define KL5KUSB105A_SIO_CONFIGURE_READ_ON      3
+#define KL5KUSB105A_SIO_CONFIGURE_READ_OFF     2
+
+/* Interpretation of modem status lines */
+/* These need sorting out by individually connecting pins and checking
+ * results. FIXME!
+ * When data is being sent we see 0x30 in the lower byte; this must
+ * contain DSR and CTS ...
+ */
+#define KL5KUSB105A_DSR			((1<<4) | (1<<5))
+#define KL5KUSB105A_CTS			((1<<5) | (1<<4))
+
+#define KL5KUSB105A_WANTS_TO_SEND	0x30
+#if 0
+#define KL5KUSB105A_DTR			/* Data Terminal Ready */
+#define KL5KUSB105A_CTS			/* Clear To Send */
+#define KL5KUSB105A_CD			/* Carrier Detect */
+#define KL5KUSB105A_DSR			/* Data Set Ready */
+#define KL5KUSB105A_RxD			/* Receive pin */
+
+#define KL5KUSB105A_LE
+#define KL5KUSB105A_RTS
+#define KL5KUSB105A_ST
+#define KL5KUSB105A_SR
+#define KL5KUSB105A_RI			/* Ring Indicator */
+#endif
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
new file mode 100644
index 000000000..5e775f68f
--- /dev/null
+++ b/drivers/usb/serial/kobil_sct.c
@@ -0,0 +1,573 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  KOBIL USB Smart Card Terminal Driver
+ *
+ *  Copyright (C) 2002  KOBIL Systems GmbH
+ *  Author: Thomas Wahrenbruch
+ *
+ *  Contact: linuxusb@kobil.de
+ *
+ *  This program is largely derived from work by the linux-usb group
+ *  and associated source files.  Please see the usb/serial files for
+ *  individual credits and copyrights.
+ *
+ *  Thanks to Greg Kroah-Hartman (greg@kroah.com) for his help and
+ *  patience.
+ *
+ * Supported readers: USB TWIN, KAAN Standard Plus and SecOVID Reader Plus
+ * (Adapter K), B1 Professional and KAAN Professional (Adapter B)
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/ioctl.h>
+#include "kobil_sct.h"
+
+#define DRIVER_AUTHOR "KOBIL Systems GmbH - http://www.kobil.com"
+#define DRIVER_DESC "KOBIL USB Smart Card Terminal Driver (experimental)"
+
+#define KOBIL_VENDOR_ID			0x0D46
+#define KOBIL_ADAPTER_B_PRODUCT_ID	0x2011
+#define KOBIL_ADAPTER_K_PRODUCT_ID	0x2012
+#define KOBIL_USBTWIN_PRODUCT_ID	0x0078
+#define KOBIL_KAAN_SIM_PRODUCT_ID       0x0081
+
+#define KOBIL_TIMEOUT		500
+#define KOBIL_BUF_LENGTH	300
+
+
+/* Function prototypes */
+static int kobil_port_probe(struct usb_serial_port *probe);
+static void kobil_port_remove(struct usb_serial_port *probe);
+static int  kobil_open(struct tty_struct *tty, struct usb_serial_port *port);
+static void kobil_close(struct usb_serial_port *port);
+static int  kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
+			 const unsigned char *buf, int count);
+static unsigned int kobil_write_room(struct tty_struct *tty);
+static int  kobil_ioctl(struct tty_struct *tty,
+			unsigned int cmd, unsigned long arg);
+static int  kobil_tiocmget(struct tty_struct *tty);
+static int  kobil_tiocmset(struct tty_struct *tty,
+			   unsigned int set, unsigned int clear);
+static void kobil_read_int_callback(struct urb *urb);
+static void kobil_write_int_callback(struct urb *urb);
+static void kobil_set_termios(struct tty_struct *tty,
+			      struct usb_serial_port *port,
+			      const struct ktermios *old);
+static void kobil_init_termios(struct tty_struct *tty);
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_B_PRODUCT_ID) },
+	{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_K_PRODUCT_ID) },
+	{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_USBTWIN_PRODUCT_ID) },
+	{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_KAAN_SIM_PRODUCT_ID) },
+	{ }			/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_serial_driver kobil_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"kobil",
+	},
+	.description =		"KOBIL USB smart card terminal",
+	.id_table =		id_table,
+	.num_ports =		1,
+	.num_interrupt_out =	1,
+	.port_probe =		kobil_port_probe,
+	.port_remove =		kobil_port_remove,
+	.ioctl =		kobil_ioctl,
+	.set_termios =		kobil_set_termios,
+	.init_termios =		kobil_init_termios,
+	.tiocmget =		kobil_tiocmget,
+	.tiocmset =		kobil_tiocmset,
+	.open =			kobil_open,
+	.close =		kobil_close,
+	.write =		kobil_write,
+	.write_room =		kobil_write_room,
+	.read_int_callback =	kobil_read_int_callback,
+	.write_int_callback =	kobil_write_int_callback,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&kobil_device, NULL
+};
+
+struct kobil_private {
+	unsigned char buf[KOBIL_BUF_LENGTH]; /* buffer for the APDU to send */
+	int filled;  /* index of the last char in buf */
+	int cur_pos; /* index of the next char to send in buf */
+	__u16 device_type;
+};
+
+
+static int kobil_port_probe(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct kobil_private *priv;
+
+	priv = kmalloc(sizeof(struct kobil_private), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->filled = 0;
+	priv->cur_pos = 0;
+	priv->device_type = le16_to_cpu(serial->dev->descriptor.idProduct);
+
+	switch (priv->device_type) {
+	case KOBIL_ADAPTER_B_PRODUCT_ID:
+		dev_dbg(&serial->dev->dev, "KOBIL B1 PRO / KAAN PRO detected\n");
+		break;
+	case KOBIL_ADAPTER_K_PRODUCT_ID:
+		dev_dbg(&serial->dev->dev, "KOBIL KAAN Standard Plus / SecOVID Reader Plus detected\n");
+		break;
+	case KOBIL_USBTWIN_PRODUCT_ID:
+		dev_dbg(&serial->dev->dev, "KOBIL USBTWIN detected\n");
+		break;
+	case KOBIL_KAAN_SIM_PRODUCT_ID:
+		dev_dbg(&serial->dev->dev, "KOBIL KAAN SIM detected\n");
+		break;
+	}
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
+}
+
+
+static void kobil_port_remove(struct usb_serial_port *port)
+{
+	struct kobil_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+}
+
+static void kobil_init_termios(struct tty_struct *tty)
+{
+	/* Default to echo off and other sane device settings */
+	tty->termios.c_lflag = 0;
+	tty->termios.c_iflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
+	tty->termios.c_iflag |= IGNBRK | IGNPAR | IXOFF;
+	/* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
+	tty->termios.c_oflag &= ~ONLCR;
+}
+
+static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct device *dev = &port->dev;
+	int result = 0;
+	struct kobil_private *priv;
+	unsigned char *transfer_buffer;
+	int transfer_buffer_length = 8;
+
+	priv = usb_get_serial_port_data(port);
+
+	/* allocate memory for transfer buffer */
+	transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
+	if (!transfer_buffer)
+		return -ENOMEM;
+
+	/* get hardware version */
+	result = usb_control_msg(port->serial->dev,
+			  usb_rcvctrlpipe(port->serial->dev, 0),
+			  SUSBCRequest_GetMisc,
+			  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN,
+			  SUSBCR_MSC_GetHWVersion,
+			  0,
+			  transfer_buffer,
+			  transfer_buffer_length,
+			  KOBIL_TIMEOUT
+	);
+	dev_dbg(dev, "%s - Send get_HW_version URB returns: %i\n", __func__, result);
+	if (result >= 3) {
+		dev_dbg(dev, "Hardware version: %i.%i.%i\n", transfer_buffer[0],
+				transfer_buffer[1], transfer_buffer[2]);
+	}
+
+	/* get firmware version */
+	result = usb_control_msg(port->serial->dev,
+			  usb_rcvctrlpipe(port->serial->dev, 0),
+			  SUSBCRequest_GetMisc,
+			  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN,
+			  SUSBCR_MSC_GetFWVersion,
+			  0,
+			  transfer_buffer,
+			  transfer_buffer_length,
+			  KOBIL_TIMEOUT
+	);
+	dev_dbg(dev, "%s - Send get_FW_version URB returns: %i\n", __func__, result);
+	if (result >= 3) {
+		dev_dbg(dev, "Firmware version: %i.%i.%i\n", transfer_buffer[0],
+				transfer_buffer[1], transfer_buffer[2]);
+	}
+
+	if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
+			priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
+		/* Setting Baudrate, Parity and Stopbits */
+		result = usb_control_msg(port->serial->dev,
+			  usb_sndctrlpipe(port->serial->dev, 0),
+			  SUSBCRequest_SetBaudRateParityAndStopBits,
+			  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+			  SUSBCR_SBR_9600 | SUSBCR_SPASB_EvenParity |
+							SUSBCR_SPASB_1StopBit,
+			  0,
+			  NULL,
+			  0,
+			  KOBIL_TIMEOUT
+		);
+		dev_dbg(dev, "%s - Send set_baudrate URB returns: %i\n", __func__, result);
+
+		/* reset all queues */
+		result = usb_control_msg(port->serial->dev,
+			  usb_sndctrlpipe(port->serial->dev, 0),
+			  SUSBCRequest_Misc,
+			  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+			  SUSBCR_MSC_ResetAllQueues,
+			  0,
+			  NULL,
+			  0,
+			  KOBIL_TIMEOUT
+		);
+		dev_dbg(dev, "%s - Send reset_all_queues URB returns: %i\n", __func__, result);
+	}
+	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
+	    priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
+	    priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
+		/* start reading (Adapter B 'cause PNP string) */
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+		dev_dbg(dev, "%s - Send read URB returns: %i\n", __func__, result);
+	}
+
+	kfree(transfer_buffer);
+	return 0;
+}
+
+
+static void kobil_close(struct usb_serial_port *port)
+{
+	/* FIXME: Add rts/dtr methods */
+	usb_kill_urb(port->interrupt_out_urb);
+	usb_kill_urb(port->interrupt_in_urb);
+}
+
+
+static void kobil_read_int_callback(struct urb *urb)
+{
+	int result;
+	struct usb_serial_port *port = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	int status = urb->status;
+
+	if (status) {
+		dev_dbg(&port->dev, "%s - Read int status not zero: %d\n", __func__, status);
+		return;
+	}
+
+	if (urb->actual_length) {
+		usb_serial_debug_data(&port->dev, __func__, urb->actual_length,
+									data);
+		tty_insert_flip_string(&port->port, data, urb->actual_length);
+		tty_flip_buffer_push(&port->port);
+	}
+
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+	dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result);
+}
+
+
+static void kobil_write_int_callback(struct urb *urb)
+{
+}
+
+
+static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *buf, int count)
+{
+	int length = 0;
+	int result = 0;
+	int todo = 0;
+	struct kobil_private *priv;
+
+	if (count == 0) {
+		dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__);
+		return 0;
+	}
+
+	priv = usb_get_serial_port_data(port);
+
+	if (count > (KOBIL_BUF_LENGTH - priv->filled)) {
+		dev_dbg(&port->dev, "%s - Error: write request bigger than buffer size\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* Copy data to buffer */
+	memcpy(priv->buf + priv->filled, buf, count);
+	usb_serial_debug_data(&port->dev, __func__, count, priv->buf + priv->filled);
+	priv->filled = priv->filled + count;
+
+	/* only send complete block. TWIN, KAAN SIM and adapter K
+	   use the same protocol. */
+	if (((priv->device_type != KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 2) && (priv->filled >= (priv->buf[1] + 3))) ||
+	     ((priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 3) && (priv->filled >= (priv->buf[2] + 4)))) {
+		/* stop reading (except TWIN and KAAN SIM) */
+		if ((priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID)
+			|| (priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID))
+			usb_kill_urb(port->interrupt_in_urb);
+
+		todo = priv->filled - priv->cur_pos;
+
+		while (todo > 0) {
+			/* max 8 byte in one urb (endpoint size) */
+			length = min(todo, port->interrupt_out_size);
+			/* copy data to transfer buffer */
+			memcpy(port->interrupt_out_buffer,
+					priv->buf + priv->cur_pos, length);
+			port->interrupt_out_urb->transfer_buffer_length = length;
+
+			priv->cur_pos = priv->cur_pos + length;
+			result = usb_submit_urb(port->interrupt_out_urb,
+					GFP_ATOMIC);
+			dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result);
+			todo = priv->filled - priv->cur_pos;
+
+			if (todo > 0)
+				msleep(24);
+		}
+
+		priv->filled = 0;
+		priv->cur_pos = 0;
+
+		/* start reading (except TWIN and KAAN SIM) */
+		if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
+			priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
+			result = usb_submit_urb(port->interrupt_in_urb,
+					GFP_ATOMIC);
+			dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result);
+		}
+	}
+	return count;
+}
+
+
+static unsigned int kobil_write_room(struct tty_struct *tty)
+{
+	/* FIXME */
+	return 8;
+}
+
+
+static int kobil_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct kobil_private *priv;
+	int result;
+	unsigned char *transfer_buffer;
+	int transfer_buffer_length = 8;
+
+	priv = usb_get_serial_port_data(port);
+	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID
+			|| priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
+		/* This device doesn't support ioctl calls */
+		return -EINVAL;
+	}
+
+	/* allocate memory for transfer buffer */
+	transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
+	if (!transfer_buffer)
+		return -ENOMEM;
+
+	result = usb_control_msg(port->serial->dev,
+			  usb_rcvctrlpipe(port->serial->dev, 0),
+			  SUSBCRequest_GetStatusLineState,
+			  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN,
+			  0,
+			  0,
+			  transfer_buffer,
+			  transfer_buffer_length,
+			  KOBIL_TIMEOUT);
+
+	dev_dbg(&port->dev, "Send get_status_line_state URB returns: %i\n",
+			result);
+	if (result < 1) {
+		if (result >= 0)
+			result = -EIO;
+		goto out_free;
+	}
+
+	dev_dbg(&port->dev, "Statusline: %02x\n", transfer_buffer[0]);
+
+	result = 0;
+	if ((transfer_buffer[0] & SUSBCR_GSL_DSR) != 0)
+		result = TIOCM_DSR;
+out_free:
+	kfree(transfer_buffer);
+	return result;
+}
+
+static int kobil_tiocmset(struct tty_struct *tty,
+			   unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct device *dev = &port->dev;
+	struct kobil_private *priv;
+	int result;
+	int dtr = 0;
+	int rts = 0;
+
+	/* FIXME: locking ? */
+	priv = usb_get_serial_port_data(port);
+	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID
+		|| priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
+		/* This device doesn't support ioctl calls */
+		return -EINVAL;
+	}
+
+	if (set & TIOCM_RTS)
+		rts = 1;
+	if (set & TIOCM_DTR)
+		dtr = 1;
+	if (clear & TIOCM_RTS)
+		rts = 0;
+	if (clear & TIOCM_DTR)
+		dtr = 0;
+
+	if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) {
+		if (dtr != 0)
+			dev_dbg(dev, "%s - Setting DTR\n", __func__);
+		else
+			dev_dbg(dev, "%s - Clearing DTR\n", __func__);
+		result = usb_control_msg(port->serial->dev,
+			  usb_sndctrlpipe(port->serial->dev, 0),
+			  SUSBCRequest_SetStatusLinesOrQueues,
+			  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+			  ((dtr != 0) ? SUSBCR_SSL_SETDTR : SUSBCR_SSL_CLRDTR),
+			  0,
+			  NULL,
+			  0,
+			  KOBIL_TIMEOUT);
+	} else {
+		if (rts != 0)
+			dev_dbg(dev, "%s - Setting RTS\n", __func__);
+		else
+			dev_dbg(dev, "%s - Clearing RTS\n", __func__);
+		result = usb_control_msg(port->serial->dev,
+			usb_sndctrlpipe(port->serial->dev, 0),
+			SUSBCRequest_SetStatusLinesOrQueues,
+			USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+			((rts != 0) ? SUSBCR_SSL_SETRTS : SUSBCR_SSL_CLRRTS),
+			0,
+			NULL,
+			0,
+			KOBIL_TIMEOUT);
+	}
+	dev_dbg(dev, "%s - Send set_status_line URB returns: %i\n", __func__, result);
+	return (result < 0) ? result : 0;
+}
+
+static void kobil_set_termios(struct tty_struct *tty,
+			      struct usb_serial_port *port,
+			      const struct ktermios *old)
+{
+	struct kobil_private *priv;
+	int result;
+	unsigned short urb_val = 0;
+	int c_cflag = tty->termios.c_cflag;
+	speed_t speed;
+
+	priv = usb_get_serial_port_data(port);
+	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
+			priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
+		/* This device doesn't support ioctl calls */
+		tty_termios_copy_hw(&tty->termios, old);
+		return;
+	}
+
+	speed = tty_get_baud_rate(tty);
+	switch (speed) {
+	case 1200:
+		urb_val = SUSBCR_SBR_1200;
+		break;
+	default:
+		speed = 9600;
+		fallthrough;
+	case 9600:
+		urb_val = SUSBCR_SBR_9600;
+		break;
+	}
+	urb_val |= (c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits :
+							SUSBCR_SPASB_1StopBit;
+	if (c_cflag & PARENB) {
+		if  (c_cflag & PARODD)
+			urb_val |= SUSBCR_SPASB_OddParity;
+		else
+			urb_val |= SUSBCR_SPASB_EvenParity;
+	} else
+		urb_val |= SUSBCR_SPASB_NoParity;
+	tty->termios.c_cflag &= ~CMSPAR;
+	tty_encode_baud_rate(tty, speed, speed);
+
+	result = usb_control_msg(port->serial->dev,
+		  usb_sndctrlpipe(port->serial->dev, 0),
+		  SUSBCRequest_SetBaudRateParityAndStopBits,
+		  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+		  urb_val,
+		  0,
+		  NULL,
+		  0,
+		  KOBIL_TIMEOUT
+		);
+	if (result) {
+		dev_err(&port->dev, "failed to update line settings: %d\n",
+				result);
+	}
+}
+
+static int kobil_ioctl(struct tty_struct *tty,
+					unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct kobil_private *priv = usb_get_serial_port_data(port);
+	int result;
+
+	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
+			priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)
+		/* This device doesn't support ioctl calls */
+		return -ENOIOCTLCMD;
+
+	switch (cmd) {
+	case TCFLSH:
+		result = usb_control_msg(port->serial->dev,
+			  usb_sndctrlpipe(port->serial->dev, 0),
+			  SUSBCRequest_Misc,
+			  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+			  SUSBCR_MSC_ResetAllQueues,
+			  0,
+			  NULL,
+			  0,
+			  KOBIL_TIMEOUT
+			);
+
+		dev_dbg(&port->dev,
+			"%s - Send reset_all_queues (FLUSH) URB returns: %i\n",
+			__func__, result);
+		return (result < 0) ? -EIO: 0;
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/kobil_sct.h b/drivers/usb/serial/kobil_sct.h
new file mode 100644
index 000000000..030c1b426
--- /dev/null
+++ b/drivers/usb/serial/kobil_sct.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#define SUSBCRequest_SetBaudRateParityAndStopBits       1
+#define SUSBCR_SBR_MASK				0xFF00
+#define SUSBCR_SBR_1200				0x0100
+#define SUSBCR_SBR_9600				0x0200
+#define SUSBCR_SBR_19200			0x0400
+#define SUSBCR_SBR_28800			0x0800
+#define SUSBCR_SBR_38400			0x1000
+#define SUSBCR_SBR_57600			0x2000
+#define SUSBCR_SBR_115200			0x4000
+
+#define SUSBCR_SPASB_MASK			0x0070
+#define SUSBCR_SPASB_NoParity			0x0010
+#define SUSBCR_SPASB_OddParity			0x0020
+#define SUSBCR_SPASB_EvenParity			0x0040
+
+#define SUSBCR_SPASB_STPMASK			0x0003
+#define SUSBCR_SPASB_1StopBit			0x0001
+#define SUSBCR_SPASB_2StopBits			0x0002
+
+#define SUSBCRequest_SetStatusLinesOrQueues	2
+#define SUSBCR_SSL_SETRTS			0x0001
+#define SUSBCR_SSL_CLRRTS			0x0002
+#define SUSBCR_SSL_SETDTR			0x0004
+#define SUSBCR_SSL_CLRDTR			0x0010
+
+/* Kill the pending/current writes to the comm port. */
+#define SUSBCR_SSL_PURGE_TXABORT		0x0100
+/* Kill the pending/current reads to the comm port. */
+#define SUSBCR_SSL_PURGE_RXABORT		0x0200
+/* Kill the transmit queue if there. */
+#define SUSBCR_SSL_PURGE_TXCLEAR		0x0400
+/* Kill the typeahead buffer if there. */
+#define SUSBCR_SSL_PURGE_RXCLEAR		0x0800
+
+#define SUSBCRequest_GetStatusLineState		4
+/* Any Character received */
+#define SUSBCR_GSL_RXCHAR			0x0001
+/* Transmitt Queue Empty */
+#define SUSBCR_GSL_TXEMPTY			0x0004
+/* CTS changed state */
+#define SUSBCR_GSL_CTS				0x0008
+/* DSR changed state */
+#define SUSBCR_GSL_DSR				0x0010
+/* RLSD changed state */
+#define SUSBCR_GSL_RLSD				0x0020
+/* BREAK received */
+#define SUSBCR_GSL_BREAK			0x0040
+/* Line status error occurred */
+#define SUSBCR_GSL_ERR				0x0080
+/* Ring signal detected */
+#define SUSBCR_GSL_RING				0x0100
+
+#define SUSBCRequest_Misc			8
+/* use a predefined reset sequence */
+#define SUSBCR_MSC_ResetReader			0x0001
+/* use a predefined sequence to reset the internal queues */
+#define SUSBCR_MSC_ResetAllQueues		0x0002
+
+#define SUSBCRequest_GetMisc			0x10
+
+/*
+ * get the firmware version from device, coded like this 0xHHLLBBPP with
+ * HH = Firmware Version High Byte
+ * LL = Firmware Version Low Byte
+ * BB = Build Number
+ * PP = Further Attributes
+ */
+#define SUSBCR_MSC_GetFWVersion			0x0001
+
+/*
+ * get the hardware version from device coded like this 0xHHLLPPRR with
+ * HH = Software Version High Byte
+ * LL = Software Version Low Byte
+ * PP = Further Attributes
+ * RR = Reserved for the hardware ID
+ */
+#define SUSBCR_MSC_GetHWVersion			0x0002
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
new file mode 100644
index 000000000..d3852feb8
--- /dev/null
+++ b/drivers/usb/serial/mct_u232.c
@@ -0,0 +1,777 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * MCT (Magic Control Technology Corp.) USB RS232 Converter Driver
+ *
+ *   Copyright (C) 2000 Wolfgang Grandegger (wolfgang@ces.ch)
+ *
+ * This program is largely derived from the Belkin USB Serial Adapter Driver
+ * (see belkin_sa.[ch]). All of the information about the device was acquired
+ * by using SniffUSB on Windows98. For technical details see mct_u232.h.
+ *
+ * William G. Greathouse and Greg Kroah-Hartman provided great help on how to
+ * do the reverse engineering and how to write a USB serial device driver.
+ *
+ * TO BE DONE, TO BE CHECKED:
+ *   DTR/RTS signal handling may be incomplete or incorrect. I have mainly
+ *   implemented what I have seen with SniffUSB or found in belkin_sa.c.
+ *   For further TODOs check also belkin_sa.c.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <asm/unaligned.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial.h>
+#include "mct_u232.h"
+
+#define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>"
+#define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver"
+
+/*
+ * Function prototypes
+ */
+static int  mct_u232_port_probe(struct usb_serial_port *port);
+static void mct_u232_port_remove(struct usb_serial_port *remove);
+static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port);
+static void mct_u232_close(struct usb_serial_port *port);
+static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
+static void mct_u232_read_int_callback(struct urb *urb);
+static void mct_u232_set_termios(struct tty_struct *tty,
+				 struct usb_serial_port *port,
+				 const struct ktermios *old_termios);
+static void mct_u232_break_ctl(struct tty_struct *tty, int break_state);
+static int  mct_u232_tiocmget(struct tty_struct *tty);
+static int  mct_u232_tiocmset(struct tty_struct *tty,
+			unsigned int set, unsigned int clear);
+static void mct_u232_throttle(struct tty_struct *tty);
+static void mct_u232_unthrottle(struct tty_struct *tty);
+
+
+/*
+ * All of the device info needed for the MCT USB-RS232 converter.
+ */
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(MCT_U232_VID, MCT_U232_PID) },
+	{ USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) },
+	{ USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) },
+	{ USB_DEVICE(MCT_U232_BELKIN_F5U109_VID, MCT_U232_BELKIN_F5U109_PID) },
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_serial_driver mct_u232_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"mct_u232",
+	},
+	.description =	     "MCT U232",
+	.id_table =	     id_table,
+	.num_ports =	     1,
+	.open =		     mct_u232_open,
+	.close =	     mct_u232_close,
+	.dtr_rts =	     mct_u232_dtr_rts,
+	.throttle =	     mct_u232_throttle,
+	.unthrottle =	     mct_u232_unthrottle,
+	.read_int_callback = mct_u232_read_int_callback,
+	.set_termios =	     mct_u232_set_termios,
+	.break_ctl =	     mct_u232_break_ctl,
+	.tiocmget =	     mct_u232_tiocmget,
+	.tiocmset =	     mct_u232_tiocmset,
+	.tiocmiwait =        usb_serial_generic_tiocmiwait,
+	.port_probe =        mct_u232_port_probe,
+	.port_remove =       mct_u232_port_remove,
+	.get_icount =        usb_serial_generic_get_icount,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&mct_u232_device, NULL
+};
+
+struct mct_u232_private {
+	struct urb *read_urb;
+	spinlock_t lock;
+	unsigned int	     control_state; /* Modem Line Setting (TIOCM) */
+	unsigned char        last_lcr;      /* Line Control Register */
+	unsigned char	     last_lsr;      /* Line Status Register */
+	unsigned char	     last_msr;      /* Modem Status Register */
+	unsigned int	     rx_flags;      /* Throttling flags */
+};
+
+#define THROTTLED		0x01
+
+/*
+ * Handle vendor specific USB requests
+ */
+
+#define WDR_TIMEOUT 5000 /* default urb timeout */
+
+/*
+ * Later day 2.6.0-test kernels have new baud rates like B230400 which
+ * we do not know how to support. We ignore them for the moment.
+ */
+static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
+					speed_t value, speed_t *result)
+{
+	*result = value;
+
+	if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID
+		|| le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_BELKIN_F5U109_PID) {
+		switch (value) {
+		case 300:
+			return 0x01;
+		case 600:
+			return 0x02; /* this one not tested */
+		case 1200:
+			return 0x03;
+		case 2400:
+			return 0x04;
+		case 4800:
+			return 0x06;
+		case 9600:
+			return 0x08;
+		case 19200:
+			return 0x09;
+		case 38400:
+			return 0x0a;
+		case 57600:
+			return 0x0b;
+		case 115200:
+			return 0x0c;
+		default:
+			*result = 9600;
+			return 0x08;
+		}
+	} else {
+		/* FIXME: Can we use any divider - should we do
+		   divider = 115200/value;
+		   real baud = 115200/divider */
+		switch (value) {
+		case 300: break;
+		case 600: break;
+		case 1200: break;
+		case 2400: break;
+		case 4800: break;
+		case 9600: break;
+		case 19200: break;
+		case 38400: break;
+		case 57600: break;
+		case 115200: break;
+		default:
+			value = 9600;
+			*result = 9600;
+		}
+		return 115200/value;
+	}
+}
+
+static int mct_u232_set_baud_rate(struct tty_struct *tty,
+	struct usb_serial *serial, struct usb_serial_port *port, speed_t value)
+{
+	unsigned int divisor;
+	int rc;
+	unsigned char *buf;
+	unsigned char cts_enable_byte = 0;
+	speed_t speed;
+
+	buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	divisor = mct_u232_calculate_baud_rate(serial, value, &speed);
+	put_unaligned_le32(divisor, buf);
+	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+				MCT_U232_SET_BAUD_RATE_REQUEST,
+				MCT_U232_SET_REQUEST_TYPE,
+				0, 0, buf, MCT_U232_SET_BAUD_RATE_SIZE,
+				WDR_TIMEOUT);
+	if (rc < 0)	/*FIXME: What value speed results */
+		dev_err(&port->dev, "Set BAUD RATE %d failed (error = %d)\n",
+			value, rc);
+	else
+		tty_encode_baud_rate(tty, speed, speed);
+	dev_dbg(&port->dev, "set_baud_rate: value: 0x%x, divisor: 0x%x\n", value, divisor);
+
+	/* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which
+	   always sends two extra USB 'device request' messages after the
+	   'baud rate change' message.  The actual functionality of the
+	   request codes in these messages is not fully understood but these
+	   particular codes are never seen in any operation besides a baud
+	   rate change.  Both of these messages send a single byte of data.
+	   In the first message, the value of this byte is always zero.
+
+	   The second message has been determined experimentally to control
+	   whether data will be transmitted to a device which is not asserting
+	   the 'CTS' signal.  If the second message's data byte is zero, data
+	   will be transmitted even if 'CTS' is not asserted (i.e. no hardware
+	   flow control).  if the second message's data byte is nonzero (a
+	   value of 1 is used by this driver), data will not be transmitted to
+	   a device which is not asserting 'CTS'.
+	*/
+
+	buf[0] = 0;
+	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+				MCT_U232_SET_UNKNOWN1_REQUEST,
+				MCT_U232_SET_REQUEST_TYPE,
+				0, 0, buf, MCT_U232_SET_UNKNOWN1_SIZE,
+				WDR_TIMEOUT);
+	if (rc < 0)
+		dev_err(&port->dev, "Sending USB device request code %d "
+			"failed (error = %d)\n", MCT_U232_SET_UNKNOWN1_REQUEST,
+			rc);
+
+	if (port && C_CRTSCTS(tty))
+	   cts_enable_byte = 1;
+
+	dev_dbg(&port->dev, "set_baud_rate: send second control message, data = %02X\n",
+		cts_enable_byte);
+	buf[0] = cts_enable_byte;
+	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			MCT_U232_SET_CTS_REQUEST,
+			MCT_U232_SET_REQUEST_TYPE,
+			0, 0, buf, MCT_U232_SET_CTS_SIZE,
+			WDR_TIMEOUT);
+	if (rc < 0)
+		dev_err(&port->dev, "Sending USB device request code %d "
+			"failed (error = %d)\n", MCT_U232_SET_CTS_REQUEST, rc);
+
+	kfree(buf);
+	return rc;
+} /* mct_u232_set_baud_rate */
+
+static int mct_u232_set_line_ctrl(struct usb_serial_port *port,
+				  unsigned char lcr)
+{
+	int rc;
+	unsigned char *buf;
+
+	buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	buf[0] = lcr;
+	rc = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
+			MCT_U232_SET_LINE_CTRL_REQUEST,
+			MCT_U232_SET_REQUEST_TYPE,
+			0, 0, buf, MCT_U232_SET_LINE_CTRL_SIZE,
+			WDR_TIMEOUT);
+	if (rc < 0)
+		dev_err(&port->dev, "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc);
+	dev_dbg(&port->dev, "set_line_ctrl: 0x%x\n", lcr);
+	kfree(buf);
+	return rc;
+} /* mct_u232_set_line_ctrl */
+
+static int mct_u232_set_modem_ctrl(struct usb_serial_port *port,
+				   unsigned int control_state)
+{
+	int rc;
+	unsigned char mcr;
+	unsigned char *buf;
+
+	buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	mcr = MCT_U232_MCR_NONE;
+	if (control_state & TIOCM_DTR)
+		mcr |= MCT_U232_MCR_DTR;
+	if (control_state & TIOCM_RTS)
+		mcr |= MCT_U232_MCR_RTS;
+
+	buf[0] = mcr;
+	rc = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
+			MCT_U232_SET_MODEM_CTRL_REQUEST,
+			MCT_U232_SET_REQUEST_TYPE,
+			0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE,
+			WDR_TIMEOUT);
+	kfree(buf);
+
+	dev_dbg(&port->dev, "set_modem_ctrl: state=0x%x ==> mcr=0x%x\n", control_state, mcr);
+
+	if (rc < 0) {
+		dev_err(&port->dev, "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+		return rc;
+	}
+	return 0;
+} /* mct_u232_set_modem_ctrl */
+
+static int mct_u232_get_modem_stat(struct usb_serial_port *port,
+				   unsigned char *msr)
+{
+	int rc;
+	unsigned char *buf;
+
+	buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
+	if (buf == NULL) {
+		*msr = 0;
+		return -ENOMEM;
+	}
+	rc = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0),
+			MCT_U232_GET_MODEM_STAT_REQUEST,
+			MCT_U232_GET_REQUEST_TYPE,
+			0, 0, buf, MCT_U232_GET_MODEM_STAT_SIZE,
+			WDR_TIMEOUT);
+	if (rc < MCT_U232_GET_MODEM_STAT_SIZE) {
+		dev_err(&port->dev, "Get MODEM STATus failed (error = %d)\n", rc);
+
+		if (rc >= 0)
+			rc = -EIO;
+
+		*msr = 0;
+	} else {
+		*msr = buf[0];
+	}
+	dev_dbg(&port->dev, "get_modem_stat: 0x%x\n", *msr);
+	kfree(buf);
+	return rc;
+} /* mct_u232_get_modem_stat */
+
+static void mct_u232_msr_to_icount(struct async_icount *icount,
+						unsigned char msr)
+{
+	/* Translate Control Line states */
+	if (msr & MCT_U232_MSR_DDSR)
+		icount->dsr++;
+	if (msr & MCT_U232_MSR_DCTS)
+		icount->cts++;
+	if (msr & MCT_U232_MSR_DRI)
+		icount->rng++;
+	if (msr & MCT_U232_MSR_DCD)
+		icount->dcd++;
+} /* mct_u232_msr_to_icount */
+
+static void mct_u232_msr_to_state(struct usb_serial_port *port,
+				  unsigned int *control_state, unsigned char msr)
+{
+	/* Translate Control Line states */
+	if (msr & MCT_U232_MSR_DSR)
+		*control_state |=  TIOCM_DSR;
+	else
+		*control_state &= ~TIOCM_DSR;
+	if (msr & MCT_U232_MSR_CTS)
+		*control_state |=  TIOCM_CTS;
+	else
+		*control_state &= ~TIOCM_CTS;
+	if (msr & MCT_U232_MSR_RI)
+		*control_state |=  TIOCM_RI;
+	else
+		*control_state &= ~TIOCM_RI;
+	if (msr & MCT_U232_MSR_CD)
+		*control_state |=  TIOCM_CD;
+	else
+		*control_state &= ~TIOCM_CD;
+	dev_dbg(&port->dev, "msr_to_state: msr=0x%x ==> state=0x%x\n", msr, *control_state);
+} /* mct_u232_msr_to_state */
+
+/*
+ * Driver's tty interface functions
+ */
+
+static int mct_u232_port_probe(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct mct_u232_private *priv;
+
+	/* check first to simplify error handling */
+	if (!serial->port[1] || !serial->port[1]->interrupt_in_urb) {
+		dev_err(&port->dev, "expected endpoint missing\n");
+		return -ENODEV;
+	}
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* Use second interrupt-in endpoint for reading. */
+	priv->read_urb = serial->port[1]->interrupt_in_urb;
+	priv->read_urb->context = port;
+
+	spin_lock_init(&priv->lock);
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
+}
+
+static void mct_u232_port_remove(struct usb_serial_port *port)
+{
+	struct mct_u232_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+}
+
+static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct mct_u232_private *priv = usb_get_serial_port_data(port);
+	int retval = 0;
+	unsigned int control_state;
+	unsigned long flags;
+	unsigned char last_lcr;
+	unsigned char last_msr;
+
+	/* Compensate for a hardware bug: although the Sitecom U232-P25
+	 * device reports a maximum output packet size of 32 bytes,
+	 * it seems to be able to accept only 16 bytes (and that's what
+	 * SniffUSB says too...)
+	 */
+	if (le16_to_cpu(serial->dev->descriptor.idProduct)
+						== MCT_U232_SITECOM_PID)
+		port->bulk_out_size = 16;
+
+	/* Do a defined restart: the normal serial device seems to
+	 * always turn on DTR and RTS here, so do the same. I'm not
+	 * sure if this is really necessary. But it should not harm
+	 * either.
+	 */
+	spin_lock_irqsave(&priv->lock, flags);
+	if (tty && C_BAUD(tty))
+		priv->control_state = TIOCM_DTR | TIOCM_RTS;
+	else
+		priv->control_state = 0;
+
+	priv->last_lcr = (MCT_U232_DATA_BITS_8 |
+			  MCT_U232_PARITY_NONE |
+			  MCT_U232_STOP_BITS_1);
+	control_state = priv->control_state;
+	last_lcr = priv->last_lcr;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	mct_u232_set_modem_ctrl(port, control_state);
+	mct_u232_set_line_ctrl(port, last_lcr);
+
+	/* Read modem status and update control state */
+	mct_u232_get_modem_stat(port, &last_msr);
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->last_msr = last_msr;
+	mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	retval = usb_submit_urb(priv->read_urb, GFP_KERNEL);
+	if (retval) {
+		dev_err(&port->dev,
+			"usb_submit_urb(read) failed pipe 0x%x err %d\n",
+			port->read_urb->pipe, retval);
+		goto error;
+	}
+
+	retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (retval) {
+		usb_kill_urb(priv->read_urb);
+		dev_err(&port->dev,
+			"usb_submit_urb(read int) failed pipe 0x%x err %d",
+			port->interrupt_in_urb->pipe, retval);
+		goto error;
+	}
+	return 0;
+
+error:
+	return retval;
+} /* mct_u232_open */
+
+static void mct_u232_dtr_rts(struct usb_serial_port *port, int on)
+{
+	unsigned int control_state;
+	struct mct_u232_private *priv = usb_get_serial_port_data(port);
+
+	spin_lock_irq(&priv->lock);
+	if (on)
+		priv->control_state |= TIOCM_DTR | TIOCM_RTS;
+	else
+		priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
+	control_state = priv->control_state;
+	spin_unlock_irq(&priv->lock);
+
+	mct_u232_set_modem_ctrl(port, control_state);
+}
+
+static void mct_u232_close(struct usb_serial_port *port)
+{
+	struct mct_u232_private *priv = usb_get_serial_port_data(port);
+
+	usb_kill_urb(priv->read_urb);
+	usb_kill_urb(port->interrupt_in_urb);
+
+	usb_serial_generic_close(port);
+} /* mct_u232_close */
+
+
+static void mct_u232_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct mct_u232_private *priv = usb_get_serial_port_data(port);
+	unsigned char *data = urb->transfer_buffer;
+	int retval;
+	int status = urb->status;
+	unsigned long flags;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
+		return;
+	default:
+		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
+		goto exit;
+	}
+
+	usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
+
+	/*
+	 * Work-a-round: handle the 'usual' bulk-in pipe here
+	 */
+	if (urb->transfer_buffer_length > 2) {
+		if (urb->actual_length) {
+			tty_insert_flip_string(&port->port, data,
+					urb->actual_length);
+			tty_flip_buffer_push(&port->port);
+		}
+		goto exit;
+	}
+
+	/*
+	 * The interrupt-in pipe signals exceptional conditions (modem line
+	 * signal changes and errors). data[0] holds MSR, data[1] holds LSR.
+	 */
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->last_msr = data[MCT_U232_MSR_INDEX];
+
+	/* Record Control Line states */
+	mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr);
+
+	mct_u232_msr_to_icount(&port->icount, priv->last_msr);
+
+#if 0
+	/* Not yet handled. See belkin_sa.c for further information */
+	/* Now to report any errors */
+	priv->last_lsr = data[MCT_U232_LSR_INDEX];
+	/*
+	 * fill in the flip buffer here, but I do not know the relation
+	 * to the current/next receive buffer or characters.  I need
+	 * to look in to this before committing any code.
+	 */
+	if (priv->last_lsr & MCT_U232_LSR_ERR) {
+		tty = tty_port_tty_get(&port->port);
+		/* Overrun Error */
+		if (priv->last_lsr & MCT_U232_LSR_OE) {
+		}
+		/* Parity Error */
+		if (priv->last_lsr & MCT_U232_LSR_PE) {
+		}
+		/* Framing Error */
+		if (priv->last_lsr & MCT_U232_LSR_FE) {
+		}
+		/* Break Indicator */
+		if (priv->last_lsr & MCT_U232_LSR_BI) {
+		}
+		tty_kref_put(tty);
+	}
+#endif
+	wake_up_interruptible(&port->port.delta_msr_wait);
+	spin_unlock_irqrestore(&priv->lock, flags);
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&port->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
+} /* mct_u232_read_int_callback */
+
+static void mct_u232_set_termios(struct tty_struct *tty,
+				 struct usb_serial_port *port,
+				 const struct ktermios *old_termios)
+{
+	struct usb_serial *serial = port->serial;
+	struct mct_u232_private *priv = usb_get_serial_port_data(port);
+	struct ktermios *termios = &tty->termios;
+	unsigned int cflag = termios->c_cflag;
+	unsigned int old_cflag = old_termios->c_cflag;
+	unsigned long flags;
+	unsigned int control_state;
+	unsigned char last_lcr;
+
+	/* get a local copy of the current port settings */
+	spin_lock_irqsave(&priv->lock, flags);
+	control_state = priv->control_state;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	last_lcr = 0;
+
+	/*
+	 * Update baud rate.
+	 * Do not attempt to cache old rates and skip settings,
+	 * disconnects screw such tricks up completely.
+	 * Premature optimization is the root of all evil.
+	 */
+
+	/* reassert DTR and RTS on transition from B0 */
+	if ((old_cflag & CBAUD) == B0) {
+		dev_dbg(&port->dev, "%s: baud was B0\n", __func__);
+		control_state |= TIOCM_DTR | TIOCM_RTS;
+		mct_u232_set_modem_ctrl(port, control_state);
+	}
+
+	mct_u232_set_baud_rate(tty, serial, port, tty_get_baud_rate(tty));
+
+	if ((cflag & CBAUD) == B0) {
+		dev_dbg(&port->dev, "%s: baud is B0\n", __func__);
+		/* Drop RTS and DTR */
+		control_state &= ~(TIOCM_DTR | TIOCM_RTS);
+		mct_u232_set_modem_ctrl(port, control_state);
+	}
+
+	/*
+	 * Update line control register (LCR)
+	 */
+
+	/* set the parity */
+	if (cflag & PARENB)
+		last_lcr |= (cflag & PARODD) ?
+			MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN;
+	else
+		last_lcr |= MCT_U232_PARITY_NONE;
+
+	/* set the number of data bits */
+	switch (cflag & CSIZE) {
+	case CS5:
+		last_lcr |= MCT_U232_DATA_BITS_5; break;
+	case CS6:
+		last_lcr |= MCT_U232_DATA_BITS_6; break;
+	case CS7:
+		last_lcr |= MCT_U232_DATA_BITS_7; break;
+	case CS8:
+		last_lcr |= MCT_U232_DATA_BITS_8; break;
+	default:
+		dev_err(&port->dev,
+			"CSIZE was not CS5-CS8, using default of 8\n");
+		last_lcr |= MCT_U232_DATA_BITS_8;
+		break;
+	}
+
+	termios->c_cflag &= ~CMSPAR;
+
+	/* set the number of stop bits */
+	last_lcr |= (cflag & CSTOPB) ?
+		MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;
+
+	mct_u232_set_line_ctrl(port, last_lcr);
+
+	/* save off the modified port settings */
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->control_state = control_state;
+	priv->last_lcr = last_lcr;
+	spin_unlock_irqrestore(&priv->lock, flags);
+} /* mct_u232_set_termios */
+
+static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct mct_u232_private *priv = usb_get_serial_port_data(port);
+	unsigned char lcr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	lcr = priv->last_lcr;
+
+	if (break_state)
+		lcr |= MCT_U232_SET_BREAK;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	mct_u232_set_line_ctrl(port, lcr);
+} /* mct_u232_break_ctl */
+
+
+static int mct_u232_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct mct_u232_private *priv = usb_get_serial_port_data(port);
+	unsigned int control_state;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	control_state = priv->control_state;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return control_state;
+}
+
+static int mct_u232_tiocmset(struct tty_struct *tty,
+			      unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct mct_u232_private *priv = usb_get_serial_port_data(port);
+	unsigned int control_state;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	control_state = priv->control_state;
+
+	if (set & TIOCM_RTS)
+		control_state |= TIOCM_RTS;
+	if (set & TIOCM_DTR)
+		control_state |= TIOCM_DTR;
+	if (clear & TIOCM_RTS)
+		control_state &= ~TIOCM_RTS;
+	if (clear & TIOCM_DTR)
+		control_state &= ~TIOCM_DTR;
+
+	priv->control_state = control_state;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return mct_u232_set_modem_ctrl(port, control_state);
+}
+
+static void mct_u232_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct mct_u232_private *priv = usb_get_serial_port_data(port);
+	unsigned int control_state;
+
+	spin_lock_irq(&priv->lock);
+	priv->rx_flags |= THROTTLED;
+	if (C_CRTSCTS(tty)) {
+		priv->control_state &= ~TIOCM_RTS;
+		control_state = priv->control_state;
+		spin_unlock_irq(&priv->lock);
+		mct_u232_set_modem_ctrl(port, control_state);
+	} else {
+		spin_unlock_irq(&priv->lock);
+	}
+}
+
+static void mct_u232_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct mct_u232_private *priv = usb_get_serial_port_data(port);
+	unsigned int control_state;
+
+	spin_lock_irq(&priv->lock);
+	if ((priv->rx_flags & THROTTLED) && C_CRTSCTS(tty)) {
+		priv->rx_flags &= ~THROTTLED;
+		priv->control_state |= TIOCM_RTS;
+		control_state = priv->control_state;
+		spin_unlock_irq(&priv->lock);
+		mct_u232_set_modem_ctrl(port, control_state);
+	} else {
+		spin_unlock_irq(&priv->lock);
+	}
+}
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
new file mode 100644
index 000000000..e3d09a83c
--- /dev/null
+++ b/drivers/usb/serial/mct_u232.h
@@ -0,0 +1,463 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Definitions for MCT (Magic Control Technology) USB-RS232 Converter Driver
+ *
+ *   Copyright (C) 2000 Wolfgang Grandegger (wolfgang@ces.ch)
+ *
+ * This driver is for the device MCT USB-RS232 Converter (25 pin, Model No.
+ * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
+ * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html 
+ * for further information. The properties of this device are listed at the end 
+ * of this file. This device was used in the Dlink DSB-S25.
+ *
+ * All of the information about the device was acquired by using SniffUSB
+ * on Windows98. The technical details of the reverse engineering are
+ * summarized at the end of this file.
+ */
+
+#ifndef __LINUX_USB_SERIAL_MCT_U232_H
+#define __LINUX_USB_SERIAL_MCT_U232_H
+
+#define MCT_U232_VID	                0x0711	/* Vendor Id */
+#define MCT_U232_PID	                0x0210	/* Original MCT Product Id */
+
+/* U232-P25, Sitecom */
+#define MCT_U232_SITECOM_PID		0x0230	/* Sitecom Product Id */
+
+/* DU-H3SP USB BAY hub */
+#define MCT_U232_DU_H3SP_PID		0x0200	/* D-Link DU-H3SP USB BAY */
+
+/* Belkin badge the MCT U232-P9 as the F5U109 */
+#define MCT_U232_BELKIN_F5U109_VID	0x050d	/* Vendor Id */
+#define MCT_U232_BELKIN_F5U109_PID	0x0109	/* Product Id */
+
+/*
+ * Vendor Request Interface
+ */
+#define MCT_U232_SET_REQUEST_TYPE	0x40
+#define MCT_U232_GET_REQUEST_TYPE	0xc0
+
+/* Get Modem Status Register (MSR) */
+#define MCT_U232_GET_MODEM_STAT_REQUEST	2
+#define MCT_U232_GET_MODEM_STAT_SIZE	1
+
+/* Get Line Control Register (LCR) */
+/* ... not used by this driver */
+#define MCT_U232_GET_LINE_CTRL_REQUEST	6
+#define MCT_U232_GET_LINE_CTRL_SIZE	1
+
+/* Set Baud Rate Divisor */
+#define MCT_U232_SET_BAUD_RATE_REQUEST	5
+#define MCT_U232_SET_BAUD_RATE_SIZE	4
+
+/* Set Line Control Register (LCR) */
+#define MCT_U232_SET_LINE_CTRL_REQUEST	7
+#define MCT_U232_SET_LINE_CTRL_SIZE	1
+
+/* Set Modem Control Register (MCR) */
+#define MCT_U232_SET_MODEM_CTRL_REQUEST	10
+#define MCT_U232_SET_MODEM_CTRL_SIZE	1
+
+/*
+ * This USB device request code is not well understood.  It is transmitted by
+ * the MCT-supplied Windows driver whenever the baud rate changes.
+ */
+#define MCT_U232_SET_UNKNOWN1_REQUEST	11  /* Unknown functionality */
+#define MCT_U232_SET_UNKNOWN1_SIZE	1
+
+/*
+ * This USB device request code appears to control whether CTS is required
+ * during transmission.
+ *
+ * Sending a zero byte allows data transmission to a device which is not
+ * asserting CTS.  Sending a '1' byte will cause transmission to be deferred
+ * until the device asserts CTS.
+ */
+#define MCT_U232_SET_CTS_REQUEST	12
+#define MCT_U232_SET_CTS_SIZE		1
+
+#define MCT_U232_MAX_SIZE		4	/* of MCT_XXX_SIZE */
+
+/*
+ * Baud rate (divisor)
+ * Actually, there are two of them, MCT website calls them "Philips solution"
+ * and "Intel solution". They are the regular MCT and "Sitecom" for us.
+ * This is pointless to document in the header, see the code for the bits.
+ */
+static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
+					speed_t value, speed_t *result);
+
+/*
+ * Line Control Register (LCR)
+ */
+#define MCT_U232_SET_BREAK              0x40
+
+#define MCT_U232_PARITY_SPACE		0x38
+#define MCT_U232_PARITY_MARK		0x28
+#define MCT_U232_PARITY_EVEN		0x18
+#define MCT_U232_PARITY_ODD		0x08
+#define MCT_U232_PARITY_NONE		0x00
+
+#define MCT_U232_DATA_BITS_5            0x00
+#define MCT_U232_DATA_BITS_6            0x01
+#define MCT_U232_DATA_BITS_7            0x02
+#define MCT_U232_DATA_BITS_8            0x03
+
+#define MCT_U232_STOP_BITS_2            0x04
+#define MCT_U232_STOP_BITS_1            0x00
+
+/*
+ * Modem Control Register (MCR)
+ */
+#define MCT_U232_MCR_NONE               0x8     /* Deactivate DTR and RTS */
+#define MCT_U232_MCR_RTS                0xa     /* Activate RTS */
+#define MCT_U232_MCR_DTR                0x9     /* Activate DTR */
+
+/*
+ * Modem Status Register (MSR)
+ */
+#define MCT_U232_MSR_INDEX              0x0     /* data[index] */
+#define MCT_U232_MSR_CD                 0x80    /* Current CD */
+#define MCT_U232_MSR_RI                 0x40    /* Current RI */
+#define MCT_U232_MSR_DSR                0x20    /* Current DSR */
+#define MCT_U232_MSR_CTS                0x10    /* Current CTS */
+#define MCT_U232_MSR_DCD                0x08    /* Delta CD */
+#define MCT_U232_MSR_DRI                0x04    /* Delta RI */
+#define MCT_U232_MSR_DDSR               0x02    /* Delta DSR */
+#define MCT_U232_MSR_DCTS               0x01    /* Delta CTS */
+
+/*
+ * Line Status Register (LSR)
+ */
+#define MCT_U232_LSR_INDEX	1	/* data[index] */
+#define MCT_U232_LSR_ERR	0x80	/* OE | PE | FE | BI */
+#define MCT_U232_LSR_TEMT	0x40	/* transmit register empty */
+#define MCT_U232_LSR_THRE	0x20	/* transmit holding register empty */
+#define MCT_U232_LSR_BI		0x10	/* break indicator */
+#define MCT_U232_LSR_FE		0x08	/* framing error */
+#define MCT_U232_LSR_OE		0x02	/* overrun error */
+#define MCT_U232_LSR_PE		0x04	/* parity error */
+#define MCT_U232_LSR_OE		0x02	/* overrun error */
+#define MCT_U232_LSR_DR		0x01	/* receive data ready */
+
+
+/* -----------------------------------------------------------------------------
+ * Technical Specification reverse engineered with SniffUSB on Windows98
+ * =====================================================================
+ *
+ *  The technical details of the device have been acquired be using "SniffUSB"
+ *  and the vendor-supplied device driver (version 2.3A) under Windows98. To
+ *  identify the USB vendor-specific requests and to assign them to terminal
+ *  settings (flow control, baud rate, etc.) the program "SerialSettings" from
+ *  William G. Greathouse has been proven to be very useful. I also used the
+ *  Win98 "HyperTerminal" and "usb-robot" on Linux for testing. The results and
+ *  observations are summarized below:
+ *
+ *  The USB requests seem to be directly mapped to the registers of a 8250,
+ *  16450 or 16550 UART. The FreeBSD handbook (appendix F.4 "Input/Output
+ *  devices") contains a comprehensive description of UARTs and its registers.
+ *  The bit descriptions are actually taken from there.
+ *
+ *
+ * Baud rate (divisor)
+ * -------------------
+ *
+ *   BmRequestType:  0x40 (0100 0000B)
+ *   bRequest:       0x05
+ *   wValue:         0x0000
+ *   wIndex:         0x0000
+ *   wLength:        0x0004
+ *   Data:           divisor = 115200 / baud_rate
+ *
+ *   SniffUSB observations (Nov 2003): Contrary to the 'wLength' value of 4
+ *   shown above, observations with a Belkin F5U109 adapter, using the
+ *   MCT-supplied Windows98 driver (U2SPORT.VXD, "File version: 1.21P.0104 for
+ *   Win98/Me"), show this request has a length of 1 byte, presumably because
+ *   of the fact that the Belkin adapter and the 'Sitecom U232-P25' adapter
+ *   use a baud-rate code instead of a conventional RS-232 baud rate divisor.
+ *   The current source code for this driver does not reflect this fact, but
+ *   the driver works fine with this adapter/driver combination nonetheless.
+ *
+ *
+ * Line Control Register (LCR)
+ * ---------------------------
+ *
+ *  BmRequestType:  0x40 (0100 0000B)    0xc0 (1100 0000B)
+ *  bRequest:       0x07                 0x06
+ *  wValue:         0x0000
+ *  wIndex:         0x0000
+ *  wLength:        0x0001
+ *  Data:           LCR (see below)
+ *
+ *  Bit 7: Divisor Latch Access Bit (DLAB). When set, access to the data
+ *	   transmit/receive register (THR/RBR) and the Interrupt Enable Register
+ *	   (IER) is disabled. Any access to these ports is now redirected to the
+ *	   Divisor Latch Registers. Setting this bit, loading the Divisor
+ *	   Registers, and clearing DLAB should be done with interrupts disabled.
+ *  Bit 6: Set Break. When set to "1", the transmitter begins to transmit
+ *	   continuous Spacing until this bit is set to "0". This overrides any
+ *	   bits of characters that are being transmitted.
+ *  Bit 5: Stick Parity. When parity is enabled, setting this bit causes parity
+ *	   to always be "1" or "0", based on the value of Bit 4.
+ *  Bit 4: Even Parity Select (EPS). When parity is enabled and Bit 5 is "0",
+ *	   setting this bit causes even parity to be transmitted and expected.
+ *	   Otherwise, odd parity is used.
+ *  Bit 3: Parity Enable (PEN). When set to "1", a parity bit is inserted
+ *	   between the last bit of the data and the Stop Bit. The UART will also
+ *	   expect parity to be present in the received data.
+ *  Bit 2: Number of Stop Bits (STB). If set to "1" and using 5-bit data words,
+ *	   1.5 Stop Bits are transmitted and expected in each data word. For
+ *	   6, 7 and 8-bit data words, 2 Stop Bits are transmitted and expected.
+ *	   When this bit is set to "0", one Stop Bit is used on each data word.
+ *  Bit 1: Word Length Select Bit #1 (WLSB1)
+ *  Bit 0: Word Length Select Bit #0 (WLSB0)
+ *	   Together these bits specify the number of bits in each data word.
+ *	     1 0  Word Length
+ *	     0 0  5 Data Bits
+ *	     0 1  6 Data Bits
+ *	     1 0  7 Data Bits
+ *	     1 1  8 Data Bits
+ *
+ *  SniffUSB observations: Bit 7 seems not to be used. There seem to be two bugs
+ *  in the Win98 driver: the break does not work (bit 6 is not asserted) and the
+ *  stick parity bit is not cleared when set once. The LCR can also be read
+ *  back with USB request 6 but this has never been observed with SniffUSB.
+ *
+ *
+ * Modem Control Register (MCR)
+ * ----------------------------
+ *
+ *  BmRequestType:  0x40  (0100 0000B)
+ *  bRequest:       0x0a
+ *  wValue:         0x0000
+ *  wIndex:         0x0000
+ *  wLength:        0x0001
+ *  Data:           MCR (Bit 4..7, see below)
+ *
+ *  Bit 7: Reserved, always 0.
+ *  Bit 6: Reserved, always 0.
+ *  Bit 5: Reserved, always 0.
+ *  Bit 4: Loop-Back Enable. When set to "1", the UART transmitter and receiver
+ *	   are internally connected together to allow diagnostic operations. In
+ *	   addition, the UART modem control outputs are connected to the UART
+ *	   modem control inputs. CTS is connected to RTS, DTR is connected to
+ *	   DSR, OUT1 is connected to RI, and OUT 2 is connected to DCD.
+ *  Bit 3: OUT 2. An auxiliary output that the host processor may set high or
+ *	   low. In the IBM PC serial adapter (and most clones), OUT 2 is used
+ *	   to tri-state (disable) the interrupt signal from the
+ *	   8250/16450/16550 UART.
+ *  Bit 2: OUT 1. An auxiliary output that the host processor may set high or
+ *	   low. This output is not used on the IBM PC serial adapter.
+ *  Bit 1: Request to Send (RTS). When set to "1", the output of the UART -RTS
+ *	   line is Low (Active).
+ *  Bit 0: Data Terminal Ready (DTR). When set to "1", the output of the UART
+ *	   -DTR line is Low (Active).
+ *
+ *  SniffUSB observations: Bit 2 and 4 seem not to be used but bit 3 has been
+ *  seen _always_ set.
+ *
+ *
+ * Modem Status Register (MSR)
+ * ---------------------------
+ *
+ *  BmRequestType:  0xc0  (1100 0000B)
+ *  bRequest:       0x02
+ *  wValue:         0x0000
+ *  wIndex:         0x0000
+ *  wLength:        0x0001
+ *  Data:           MSR (see below)
+ *
+ *  Bit 7: Data Carrier Detect (CD). Reflects the state of the DCD line on the
+ *	   UART.
+ *  Bit 6: Ring Indicator (RI). Reflects the state of the RI line on the UART.
+ *  Bit 5: Data Set Ready (DSR). Reflects the state of the DSR line on the UART.
+ *  Bit 4: Clear To Send (CTS). Reflects the state of the CTS line on the UART.
+ *  Bit 3: Delta Data Carrier Detect (DDCD). Set to "1" if the -DCD line has
+ *	   changed state one more more times since the last time the MSR was
+ *	   read by the host.
+ *  Bit 2: Trailing Edge Ring Indicator (TERI). Set to "1" if the -RI line has
+ *	   had a low to high transition since the last time the MSR was read by
+ *	   the host.
+ *  Bit 1: Delta Data Set Ready (DDSR). Set to "1" if the -DSR line has changed
+ *	   state one more more times since the last time the MSR was read by the
+ *	   host.
+ *  Bit 0: Delta Clear To Send (DCTS). Set to "1" if the -CTS line has changed
+ *	   state one more times since the last time the MSR was read by the
+ *	   host.
+ *
+ *  SniffUSB observations: the MSR is also returned as first byte on the
+ *  interrupt-in endpoint 0x83 to signal changes of modem status lines. The USB
+ *  request to read MSR cannot be applied during normal device operation.
+ *
+ *
+ * Line Status Register (LSR)
+ * --------------------------
+ *
+ *  Bit 7   Error in Receiver FIFO. On the 8250/16450 UART, this bit is zero.
+ *	    This bit is set to "1" when any of the bytes in the FIFO have one
+ *	    or more of the following error conditions: PE, FE, or BI.
+ *  Bit 6   Transmitter Empty (TEMT). When set to "1", there are no words
+ *	    remaining in the transmit FIFO or the transmit shift register. The
+ *	    transmitter is completely idle.
+ *  Bit 5   Transmitter Holding Register Empty (THRE). When set to "1", the
+ *	    FIFO (or holding register) now has room for at least one additional
+ *	    word to transmit. The transmitter may still be transmitting when
+ *	    this bit is set to "1".
+ *  Bit 4   Break Interrupt (BI). The receiver has detected a Break signal.
+ *  Bit 3   Framing Error (FE). A Start Bit was detected but the Stop Bit did
+ *	    not appear at the expected time. The received word is probably
+ *	    garbled.
+ *  Bit 2   Parity Error (PE). The parity bit was incorrect for the word
+ *	    received.
+ *  Bit 1   Overrun Error (OE). A new word was received and there was no room
+ *	    in the receive buffer. The newly-arrived word in the shift register
+ *	    is discarded. On 8250/16450 UARTs, the word in the holding register
+ *	    is discarded and the newly- arrived word is put in the holding
+ *	    register.
+ *  Bit 0   Data Ready (DR). One or more words are in the receive FIFO that the
+ *	    host may read. A word must be completely received and moved from
+ *	    the shift register into the FIFO (or holding register for
+ *	    8250/16450 designs) before this bit is set.
+ *
+ *  SniffUSB observations: the LSR is returned as second byte on the
+ *  interrupt-in endpoint 0x83 to signal error conditions. Such errors have
+ *  been seen with minicom/zmodem transfers (CRC errors).
+ *
+ *
+ * Unknown #1
+ * -------------------
+ *
+ *   BmRequestType:  0x40 (0100 0000B)
+ *   bRequest:       0x0b
+ *   wValue:         0x0000
+ *   wIndex:         0x0000
+ *   wLength:        0x0001
+ *   Data:           0x00
+ *
+ *   SniffUSB observations (Nov 2003): With the MCT-supplied Windows98 driver
+ *   (U2SPORT.VXD, "File version: 1.21P.0104 for Win98/Me"), this request
+ *   occurs immediately after a "Baud rate (divisor)" message.  It was not
+ *   observed at any other time.  It is unclear what purpose this message
+ *   serves.
+ *
+ *
+ * Unknown #2
+ * -------------------
+ *
+ *   BmRequestType:  0x40 (0100 0000B)
+ *   bRequest:       0x0c
+ *   wValue:         0x0000
+ *   wIndex:         0x0000
+ *   wLength:        0x0001
+ *   Data:           0x00
+ *
+ *   SniffUSB observations (Nov 2003): With the MCT-supplied Windows98 driver
+ *   (U2SPORT.VXD, "File version: 1.21P.0104 for Win98/Me"), this request
+ *   occurs immediately after the 'Unknown #1' message (see above).  It was
+ *   not observed at any other time.  It is unclear what other purpose (if
+ *   any) this message might serve, but without it, the USB/RS-232 adapter
+ *   will not write to RS-232 devices which do not assert the 'CTS' signal.
+ *
+ *
+ * Flow control
+ * ------------
+ *
+ *  SniffUSB observations: no flow control specific requests have been realized
+ *  apart from DTR/RTS settings. Both signals are dropped for no flow control
+ *  but asserted for hardware or software flow control.
+ *
+ *
+ * Endpoint usage
+ * --------------
+ *
+ *  SniffUSB observations: the bulk-out endpoint 0x1 and interrupt-in endpoint
+ *  0x81 is used to transmit and receive characters. The second interrupt-in
+ *  endpoint 0x83 signals exceptional conditions like modem line changes and
+ *  errors. The first byte returned is the MSR and the second byte the LSR.
+ *
+ *
+ * Other observations
+ * ------------------
+ *
+ *  Queued bulk transfers like used in visor.c did not work.
+ *
+ *
+ * Properties of the USB device used (as found in /var/log/messages)
+ * -----------------------------------------------------------------
+ *
+ *  Manufacturer: MCT Corporation.
+ *  Product: USB-232 Interfact Controller
+ *  SerialNumber: U2S22050
+ *
+ *    Length              = 18
+ *    DescriptorType      = 01
+ *    USB version         = 1.00
+ *    Vendor:Product      = 0711:0210
+ *    MaxPacketSize0      = 8
+ *    NumConfigurations   = 1
+ *    Device version      = 1.02
+ *    Device Class:SubClass:Protocol = 00:00:00
+ *      Per-interface classes
+ *  Configuration:
+ *    bLength             =    9
+ *    bDescriptorType     =   02
+ *    wTotalLength        = 0027
+ *    bNumInterfaces      =   01
+ *    bConfigurationValue =   01
+ *    iConfiguration      =   00
+ *    bmAttributes        =   c0
+ *    MaxPower            =  100mA
+ *
+ *    Interface: 0
+ *    Alternate Setting:  0
+ *      bLength             =    9
+ *      bDescriptorType     =   04
+ *      bInterfaceNumber    =   00
+ *      bAlternateSetting   =   00
+ *      bNumEndpoints       =   03
+ *      bInterface Class:SubClass:Protocol =   00:00:00
+ *      iInterface          =   00
+ *      Endpoint:
+ *	  bLength             =    7
+ *	  bDescriptorType     =   05
+ *	  bEndpointAddress    =   81 (in)
+ *	  bmAttributes        =   03 (Interrupt)
+ *	  wMaxPacketSize      = 0040
+ *	  bInterval           =   02
+ *      Endpoint:
+ *	  bLength             =    7
+ *	  bDescriptorType     =   05
+ *	  bEndpointAddress    =   01 (out)
+ *	  bmAttributes        =   02 (Bulk)
+ *	  wMaxPacketSize      = 0040
+ *	  bInterval           =   00
+ *      Endpoint:
+ *	  bLength             =    7
+ *	  bDescriptorType     =   05
+ *	  bEndpointAddress    =   83 (in)
+ *	  bmAttributes        =   03 (Interrupt)
+ *	  wMaxPacketSize      = 0002
+ *	  bInterval           =   02
+ *
+ *
+ * Hardware details (added by Martin Hamilton, 2001/12/06)
+ * -----------------------------------------------------------------
+ *
+ * This info was gleaned from opening a Belkin F5U109 DB9 USB serial
+ * adaptor, which turns out to simply be a re-badged U232-P9.  We
+ * know this because there is a sticky label on the circuit board
+ * which says "U232-P9" ;-)
+ *
+ * The circuit board inside the adaptor contains a Philips PDIUSBD12
+ * USB endpoint chip and a Philips P87C52UBAA microcontroller with
+ * embedded UART.  Exhaustive documentation for these is available at:
+ *
+ *   http://www.semiconductors.philips.com/pip/p87c52ubaa
+ *   http://www.nxp.com/acrobat_download/various/PDIUSBD12_PROGRAMMING_GUIDE.pdf
+ *
+ * Thanks to Julian Highfield for the pointer to the Philips database.
+ *
+ */
+
+#endif /* __LINUX_USB_SERIAL_MCT_U232_H */
+
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
new file mode 100644
index 000000000..30ab565e0
--- /dev/null
+++ b/drivers/usb/serial/metro-usb.c
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+  Some of this code is credited to Linux USB open source files that are
+  distributed with Linux.
+
+  Copyright:	2007 Metrologic Instruments. All rights reserved.
+  Copyright:	2011 Azimut Ltd. <http://azimutrzn.ru/>
+*/
+
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb/serial.h>
+
+#define DRIVER_DESC "Metrologic Instruments Inc. - USB-POS driver"
+
+/* Product information. */
+#define FOCUS_VENDOR_ID			0x0C2E
+#define FOCUS_PRODUCT_ID_BI		0x0720
+#define FOCUS_PRODUCT_ID_UNI		0x0700
+
+#define METROUSB_SET_REQUEST_TYPE	0x40
+#define METROUSB_SET_MODEM_CTRL_REQUEST	10
+#define METROUSB_SET_BREAK_REQUEST	0x40
+#define METROUSB_MCR_NONE		0x08	/* Deactivate DTR and RTS. */
+#define METROUSB_MCR_RTS		0x0a	/* Activate RTS. */
+#define METROUSB_MCR_DTR		0x09	/* Activate DTR. */
+#define WDR_TIMEOUT			5000	/* default urb timeout. */
+
+/* Private data structure. */
+struct metrousb_private {
+	spinlock_t lock;
+	int throttled;
+	unsigned long control_state;
+};
+
+/* Device table list. */
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_BI) },
+	{ USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0c2e, 0x0730, 0xff) },	/* MS7820 */
+	{ }, /* Terminating entry. */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* UNI-Directional mode commands for device configure */
+#define UNI_CMD_OPEN	0x80
+#define UNI_CMD_CLOSE	0xFF
+
+static int metrousb_is_unidirectional_mode(struct usb_serial *serial)
+{
+	u16 product_id = le16_to_cpu(serial->dev->descriptor.idProduct);
+
+	return product_id == FOCUS_PRODUCT_ID_UNI;
+}
+
+static int metrousb_calc_num_ports(struct usb_serial *serial,
+				   struct usb_serial_endpoints *epds)
+{
+	if (metrousb_is_unidirectional_mode(serial)) {
+		if (epds->num_interrupt_out == 0) {
+			dev_err(&serial->interface->dev, "interrupt-out endpoint missing\n");
+			return -ENODEV;
+		}
+	}
+
+	return 1;
+}
+
+static int metrousb_send_unidirectional_cmd(u8 cmd, struct usb_serial_port *port)
+{
+	int ret;
+	int actual_len;
+	u8 *buffer_cmd = NULL;
+
+	if (!metrousb_is_unidirectional_mode(port->serial))
+		return 0;
+
+	buffer_cmd = kzalloc(sizeof(cmd), GFP_KERNEL);
+	if (!buffer_cmd)
+		return -ENOMEM;
+
+	*buffer_cmd = cmd;
+
+	ret = usb_interrupt_msg(port->serial->dev,
+		usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
+		buffer_cmd, sizeof(cmd),
+		&actual_len, USB_CTRL_SET_TIMEOUT);
+
+	kfree(buffer_cmd);
+
+	if (ret < 0)
+		return ret;
+	else if (actual_len != sizeof(cmd))
+		return -EIO;
+	return 0;
+}
+
+static void metrousb_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+	unsigned char *data = urb->transfer_buffer;
+	unsigned long flags;
+	int throttled = 0;
+	int result = 0;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	switch (urb->status) {
+	case 0:
+		/* Success status, read from the port. */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* urb has been terminated. */
+		dev_dbg(&port->dev,
+			"%s - urb shutting down, error code=%d\n",
+			__func__, urb->status);
+		return;
+	default:
+		dev_dbg(&port->dev,
+			"%s - non-zero urb received, error code=%d\n",
+			__func__, urb->status);
+		goto exit;
+	}
+
+
+	/* Set the data read from the usb port into the serial port buffer. */
+	if (urb->actual_length) {
+		/* Loop through the data copying each byte to the tty layer. */
+		tty_insert_flip_string(&port->port, data, urb->actual_length);
+
+		/* Force the data to the tty layer. */
+		tty_flip_buffer_push(&port->port);
+	}
+
+	/* Set any port variables. */
+	spin_lock_irqsave(&metro_priv->lock, flags);
+	throttled = metro_priv->throttled;
+	spin_unlock_irqrestore(&metro_priv->lock, flags);
+
+	if (throttled)
+		return;
+exit:
+	/* Try to resubmit the urb. */
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result)
+		dev_err(&port->dev,
+			"%s - failed submitting interrupt in urb, error code=%d\n",
+			__func__, result);
+}
+
+static void metrousb_cleanup(struct usb_serial_port *port)
+{
+	usb_kill_urb(port->interrupt_in_urb);
+
+	metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port);
+}
+
+static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	int result = 0;
+
+	/* Set the private data information for the port. */
+	spin_lock_irqsave(&metro_priv->lock, flags);
+	metro_priv->control_state = 0;
+	metro_priv->throttled = 0;
+	spin_unlock_irqrestore(&metro_priv->lock, flags);
+
+	/* Clear the urb pipe. */
+	usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe);
+
+	/* Start reading from the device */
+	usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
+			  usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
+			   port->interrupt_in_urb->transfer_buffer,
+			   port->interrupt_in_urb->transfer_buffer_length,
+			   metrousb_read_int_callback, port, 1);
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+
+	if (result) {
+		dev_err(&port->dev,
+			"%s - failed submitting interrupt in urb, error code=%d\n",
+			__func__, result);
+		return result;
+	}
+
+	/* Send activate cmd to device */
+	result = metrousb_send_unidirectional_cmd(UNI_CMD_OPEN, port);
+	if (result) {
+		dev_err(&port->dev,
+			"%s - failed to configure device, error code=%d\n",
+			__func__, result);
+		goto err_kill_urb;
+	}
+
+	return 0;
+
+err_kill_urb:
+	usb_kill_urb(port->interrupt_in_urb);
+
+	return result;
+}
+
+static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int control_state)
+{
+	int retval = 0;
+	unsigned char mcr = METROUSB_MCR_NONE;
+
+	dev_dbg(&serial->dev->dev, "%s - control state = %d\n",
+		__func__, control_state);
+
+	/* Set the modem control value. */
+	if (control_state & TIOCM_DTR)
+		mcr |= METROUSB_MCR_DTR;
+	if (control_state & TIOCM_RTS)
+		mcr |= METROUSB_MCR_RTS;
+
+	/* Send the command to the usb port. */
+	retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+				METROUSB_SET_REQUEST_TYPE, METROUSB_SET_MODEM_CTRL_REQUEST,
+				control_state, 0, NULL, 0, WDR_TIMEOUT);
+	if (retval < 0)
+		dev_err(&serial->dev->dev,
+			"%s - set modem ctrl=0x%x failed, error code=%d\n",
+			__func__, mcr, retval);
+
+	return retval;
+}
+
+static int metrousb_port_probe(struct usb_serial_port *port)
+{
+	struct metrousb_private *metro_priv;
+
+	metro_priv = kzalloc(sizeof(*metro_priv), GFP_KERNEL);
+	if (!metro_priv)
+		return -ENOMEM;
+
+	spin_lock_init(&metro_priv->lock);
+
+	usb_set_serial_port_data(port, metro_priv);
+
+	return 0;
+}
+
+static void metrousb_port_remove(struct usb_serial_port *port)
+{
+	struct metrousb_private *metro_priv;
+
+	metro_priv = usb_get_serial_port_data(port);
+	kfree(metro_priv);
+}
+
+static void metrousb_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	/* Set the private information for the port to stop reading data. */
+	spin_lock_irqsave(&metro_priv->lock, flags);
+	metro_priv->throttled = 1;
+	spin_unlock_irqrestore(&metro_priv->lock, flags);
+}
+
+static int metrousb_tiocmget(struct tty_struct *tty)
+{
+	unsigned long control_state = 0;
+	struct usb_serial_port *port = tty->driver_data;
+	struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&metro_priv->lock, flags);
+	control_state = metro_priv->control_state;
+	spin_unlock_irqrestore(&metro_priv->lock, flags);
+
+	return control_state;
+}
+
+static int metrousb_tiocmset(struct tty_struct *tty,
+			     unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
+	struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned long control_state = 0;
+
+	dev_dbg(&port->dev, "%s - set=%d, clear=%d\n", __func__, set, clear);
+
+	spin_lock_irqsave(&metro_priv->lock, flags);
+	control_state = metro_priv->control_state;
+
+	/* Set the RTS and DTR values. */
+	if (set & TIOCM_RTS)
+		control_state |= TIOCM_RTS;
+	if (set & TIOCM_DTR)
+		control_state |= TIOCM_DTR;
+	if (clear & TIOCM_RTS)
+		control_state &= ~TIOCM_RTS;
+	if (clear & TIOCM_DTR)
+		control_state &= ~TIOCM_DTR;
+
+	metro_priv->control_state = control_state;
+	spin_unlock_irqrestore(&metro_priv->lock, flags);
+	return metrousb_set_modem_ctrl(serial, control_state);
+}
+
+static void metrousb_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	int result = 0;
+
+	/* Set the private information for the port to resume reading data. */
+	spin_lock_irqsave(&metro_priv->lock, flags);
+	metro_priv->throttled = 0;
+	spin_unlock_irqrestore(&metro_priv->lock, flags);
+
+	/* Submit the urb to read from the port. */
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+	if (result)
+		dev_err(&port->dev,
+			"failed submitting interrupt in urb error code=%d\n",
+			result);
+}
+
+static struct usb_serial_driver metrousb_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"metro-usb",
+	},
+	.description		= "Metrologic USB to Serial",
+	.id_table		= id_table,
+	.num_interrupt_in	= 1,
+	.calc_num_ports		= metrousb_calc_num_ports,
+	.open			= metrousb_open,
+	.close			= metrousb_cleanup,
+	.read_int_callback	= metrousb_read_int_callback,
+	.port_probe		= metrousb_port_probe,
+	.port_remove		= metrousb_port_remove,
+	.throttle		= metrousb_throttle,
+	.unthrottle		= metrousb_unthrottle,
+	.tiocmget		= metrousb_tiocmget,
+	.tiocmset		= metrousb_tiocmset,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&metrousb_device,
+	NULL,
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Philip Nicastro");
+MODULE_AUTHOR("Aleksey Babahin <tamerlan311@gmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
new file mode 100644
index 000000000..1d1f85fab
--- /dev/null
+++ b/drivers/usb/serial/mos7720.c
@@ -0,0 +1,1763 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * mos7720.c
+ *   Controls the Moschip 7720 usb to dual port serial converter
+ *
+ * Copyright 2006 Moschip Semiconductor Tech. Ltd.
+ *
+ * Developed by:
+ * 	Vijaya Kumar <vijaykumar.gn@gmail.com>
+ *	Ajay Kumar <naanuajay@yahoo.com>
+ *	Gurudeva <ngurudeva@yahoo.com>
+ *
+ * Cleaned up from the original by:
+ *	Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * Originally based on drivers/usb/serial/io_edgeport.c which is:
+ *	Copyright (C) 2000 Inside Out Networks, All rights reserved.
+ *	Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+#include <linux/parport.h>
+
+#define DRIVER_AUTHOR "Aspire Communications pvt Ltd."
+#define DRIVER_DESC "Moschip USB Serial Driver"
+
+/* default urb timeout */
+#define MOS_WDR_TIMEOUT	5000
+
+#define MOS_MAX_PORT	0x02
+#define MOS_WRITE	0x0E
+#define MOS_READ	0x0D
+
+/* Interrupt Routines Defines	*/
+#define SERIAL_IIR_RLS	0x06
+#define SERIAL_IIR_RDA	0x04
+#define SERIAL_IIR_CTI	0x0c
+#define SERIAL_IIR_THR	0x02
+#define SERIAL_IIR_MS	0x00
+
+#define NUM_URBS			16	/* URB Count */
+#define URB_TRANSFER_BUFFER_SIZE	32	/* URB Size */
+
+/* This structure holds all of the local serial port information */
+struct moschip_port {
+	__u8	shadowLCR;		/* last LCR value received */
+	__u8	shadowMCR;		/* last MCR value received */
+	__u8	shadowMSR;		/* last MSR value received */
+	char			open;
+	struct usb_serial_port	*port;	/* loop back to the owner */
+	struct urb		*write_urb_pool[NUM_URBS];
+};
+
+#define USB_VENDOR_ID_MOSCHIP		0x9710
+#define MOSCHIP_DEVICE_ID_7720		0x7720
+#define MOSCHIP_DEVICE_ID_7715		0x7715
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) },
+	{ USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7715) },
+	{ } /* terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
+
+/* initial values for parport regs */
+#define DCR_INIT_VAL       0x0c	/* SLCTIN, nINIT */
+#define ECR_INIT_VAL       0x00	/* SPP mode */
+
+enum mos7715_pp_modes {
+	SPP = 0<<5,
+	PS2 = 1<<5,      /* moschip calls this 'NIBBLE' mode */
+	PPF = 2<<5,	 /* moschip calls this 'CB-FIFO mode */
+};
+
+struct mos7715_parport {
+	struct parport          *pp;	       /* back to containing struct */
+	struct kref             ref_count;     /* to instance of this struct */
+	bool                    msg_pending;   /* usb sync call pending */
+	struct completion       syncmsg_compl; /* usb sync call completed */
+	struct work_struct      work;          /* restore deferred writes */
+	struct usb_serial       *serial;       /* back to containing struct */
+	__u8	                shadowECR;     /* parallel port regs... */
+	__u8	                shadowDCR;
+	atomic_t                shadowDSR;     /* updated in int-in callback */
+};
+
+/* lock guards against dereferencing NULL ptr in parport ops callbacks */
+static DEFINE_SPINLOCK(release_lock);
+
+#endif	/* CONFIG_USB_SERIAL_MOS7715_PARPORT */
+
+static const unsigned int dummy; /* for clarity in register access fns */
+
+enum mos_regs {
+	MOS7720_THR,		  /* serial port regs */
+	MOS7720_RHR,
+	MOS7720_IER,
+	MOS7720_FCR,
+	MOS7720_ISR,
+	MOS7720_LCR,
+	MOS7720_MCR,
+	MOS7720_LSR,
+	MOS7720_MSR,
+	MOS7720_SPR,
+	MOS7720_DLL,
+	MOS7720_DLM,
+	MOS7720_DPR,		  /* parallel port regs */
+	MOS7720_DSR,
+	MOS7720_DCR,
+	MOS7720_ECR,
+	MOS7720_SP1_REG,	  /* device control regs */
+	MOS7720_SP2_REG,	  /* serial port 2 (7720 only) */
+	MOS7720_PP_REG,
+	MOS7720_SP_CONTROL_REG,
+};
+
+/*
+ * Return the correct value for the Windex field of the setup packet
+ * for a control endpoint message.  See the 7715 datasheet.
+ */
+static inline __u16 get_reg_index(enum mos_regs reg)
+{
+	static const __u16 mos7715_index_lookup_table[] = {
+		0x00,		/* MOS7720_THR */
+		0x00,		/* MOS7720_RHR */
+		0x01,		/* MOS7720_IER */
+		0x02,		/* MOS7720_FCR */
+		0x02,		/* MOS7720_ISR */
+		0x03,		/* MOS7720_LCR */
+		0x04,		/* MOS7720_MCR */
+		0x05,		/* MOS7720_LSR */
+		0x06,		/* MOS7720_MSR */
+		0x07,		/* MOS7720_SPR */
+		0x00,		/* MOS7720_DLL */
+		0x01,		/* MOS7720_DLM */
+		0x00,		/* MOS7720_DPR */
+		0x01,		/* MOS7720_DSR */
+		0x02,		/* MOS7720_DCR */
+		0x0a,		/* MOS7720_ECR */
+		0x01,		/* MOS7720_SP1_REG */
+		0x02,		/* MOS7720_SP2_REG (7720 only) */
+		0x04,		/* MOS7720_PP_REG (7715 only) */
+		0x08,		/* MOS7720_SP_CONTROL_REG */
+	};
+	return mos7715_index_lookup_table[reg];
+}
+
+/*
+ * Return the correct value for the upper byte of the Wvalue field of
+ * the setup packet for a control endpoint message.
+ */
+static inline __u16 get_reg_value(enum mos_regs reg,
+				  unsigned int serial_portnum)
+{
+	if (reg >= MOS7720_SP1_REG)	/* control reg */
+		return 0x0000;
+
+	else if (reg >= MOS7720_DPR)	/* parallel port reg (7715 only) */
+		return 0x0100;
+
+	else			      /* serial port reg */
+		return (serial_portnum + 2) << 8;
+}
+
+/*
+ * Write data byte to the specified device register.  The data is embedded in
+ * the value field of the setup packet. serial_portnum is ignored for registers
+ * not specific to a particular serial port.
+ */
+static int write_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
+			 enum mos_regs reg, __u8 data)
+{
+	struct usb_device *usbdev = serial->dev;
+	unsigned int pipe = usb_sndctrlpipe(usbdev, 0);
+	__u8 request = (__u8)0x0e;
+	__u8 requesttype = (__u8)0x40;
+	__u16 index = get_reg_index(reg);
+	__u16 value = get_reg_value(reg, serial_portnum) + data;
+	int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
+				     index, NULL, 0, MOS_WDR_TIMEOUT);
+	if (status < 0)
+		dev_err(&usbdev->dev,
+			"mos7720: usb_control_msg() failed: %d\n", status);
+	return status;
+}
+
+/*
+ * Read data byte from the specified device register.  The data returned by the
+ * device is embedded in the value field of the setup packet.  serial_portnum is
+ * ignored for registers that are not specific to a particular serial port.
+ */
+static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
+			enum mos_regs reg, __u8 *data)
+{
+	struct usb_device *usbdev = serial->dev;
+	unsigned int pipe = usb_rcvctrlpipe(usbdev, 0);
+	__u8 request = (__u8)0x0d;
+	__u8 requesttype = (__u8)0xc0;
+	__u16 index = get_reg_index(reg);
+	__u16 value = get_reg_value(reg, serial_portnum);
+	u8 *buf;
+	int status;
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf) {
+		*data = 0;
+		return -ENOMEM;
+	}
+
+	status = usb_control_msg(usbdev, pipe, request, requesttype, value,
+				     index, buf, 1, MOS_WDR_TIMEOUT);
+	if (status == 1) {
+		*data = *buf;
+	} else {
+		dev_err(&usbdev->dev,
+			"mos7720: usb_control_msg() failed: %d\n", status);
+		if (status >= 0)
+			status = -EIO;
+		*data = 0;
+	}
+
+	kfree(buf);
+
+	return status;
+}
+
+#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
+
+static inline int mos7715_change_mode(struct mos7715_parport *mos_parport,
+				      enum mos7715_pp_modes mode)
+{
+	mos_parport->shadowECR = mode;
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_ECR,
+		      mos_parport->shadowECR);
+	return 0;
+}
+
+static void destroy_mos_parport(struct kref *kref)
+{
+	struct mos7715_parport *mos_parport =
+		container_of(kref, struct mos7715_parport, ref_count);
+
+	kfree(mos_parport);
+}
+
+/*
+ * This is the common top part of all parallel port callback operations that
+ * send synchronous messages to the device.  This implements convoluted locking
+ * that avoids two scenarios: (1) a port operation is called after usbserial
+ * has called our release function, at which point struct mos7715_parport has
+ * been destroyed, and (2) the device has been disconnected, but usbserial has
+ * not called the release function yet because someone has a serial port open.
+ * The shared release_lock prevents the first, and the mutex and disconnected
+ * flag maintained by usbserial covers the second.  We also use the msg_pending
+ * flag to ensure that all synchronous usb message calls have completed before
+ * our release function can return.
+ */
+static int parport_prologue(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport;
+
+	spin_lock(&release_lock);
+	mos_parport = pp->private_data;
+	if (unlikely(mos_parport == NULL)) {
+		/* release fn called, port struct destroyed */
+		spin_unlock(&release_lock);
+		return -1;
+	}
+	mos_parport->msg_pending = true;   /* synch usb call pending */
+	reinit_completion(&mos_parport->syncmsg_compl);
+	spin_unlock(&release_lock);
+
+	/* ensure writes from restore are submitted before new requests */
+	if (work_pending(&mos_parport->work))
+		flush_work(&mos_parport->work);
+
+	mutex_lock(&mos_parport->serial->disc_mutex);
+	if (mos_parport->serial->disconnected) {
+		/* device disconnected */
+		mutex_unlock(&mos_parport->serial->disc_mutex);
+		mos_parport->msg_pending = false;
+		complete(&mos_parport->syncmsg_compl);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * This is the common bottom part of all parallel port functions that send
+ * synchronous messages to the device.
+ */
+static inline void parport_epilogue(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	mutex_unlock(&mos_parport->serial->disc_mutex);
+	mos_parport->msg_pending = false;
+	complete(&mos_parport->syncmsg_compl);
+}
+
+static void deferred_restore_writes(struct work_struct *work)
+{
+	struct mos7715_parport *mos_parport;
+
+	mos_parport = container_of(work, struct mos7715_parport, work);
+
+	mutex_lock(&mos_parport->serial->disc_mutex);
+
+	/* if device disconnected, game over */
+	if (mos_parport->serial->disconnected)
+		goto done;
+
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
+		      mos_parport->shadowDCR);
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_ECR,
+		      mos_parport->shadowECR);
+done:
+	mutex_unlock(&mos_parport->serial->disc_mutex);
+}
+
+static void parport_mos7715_write_data(struct parport *pp, unsigned char d)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+
+	if (parport_prologue(pp) < 0)
+		return;
+	mos7715_change_mode(mos_parport, SPP);
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_DPR, (__u8)d);
+	parport_epilogue(pp);
+}
+
+static unsigned char parport_mos7715_read_data(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	unsigned char d;
+
+	if (parport_prologue(pp) < 0)
+		return 0;
+	read_mos_reg(mos_parport->serial, dummy, MOS7720_DPR, &d);
+	parport_epilogue(pp);
+	return d;
+}
+
+static void parport_mos7715_write_control(struct parport *pp, unsigned char d)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	__u8 data;
+
+	if (parport_prologue(pp) < 0)
+		return;
+	data = ((__u8)d & 0x0f) | (mos_parport->shadowDCR & 0xf0);
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR, data);
+	mos_parport->shadowDCR = data;
+	parport_epilogue(pp);
+}
+
+static unsigned char parport_mos7715_read_control(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport;
+	__u8 dcr;
+
+	spin_lock(&release_lock);
+	mos_parport = pp->private_data;
+	if (unlikely(mos_parport == NULL)) {
+		spin_unlock(&release_lock);
+		return 0;
+	}
+	dcr = mos_parport->shadowDCR & 0x0f;
+	spin_unlock(&release_lock);
+	return dcr;
+}
+
+static unsigned char parport_mos7715_frob_control(struct parport *pp,
+						  unsigned char mask,
+						  unsigned char val)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	__u8 dcr;
+
+	mask &= 0x0f;
+	val &= 0x0f;
+	if (parport_prologue(pp) < 0)
+		return 0;
+	mos_parport->shadowDCR = (mos_parport->shadowDCR & (~mask)) ^ val;
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
+		      mos_parport->shadowDCR);
+	dcr = mos_parport->shadowDCR & 0x0f;
+	parport_epilogue(pp);
+	return dcr;
+}
+
+static unsigned char parport_mos7715_read_status(struct parport *pp)
+{
+	unsigned char status;
+	struct mos7715_parport *mos_parport;
+
+	spin_lock(&release_lock);
+	mos_parport = pp->private_data;
+	if (unlikely(mos_parport == NULL)) {	/* release called */
+		spin_unlock(&release_lock);
+		return 0;
+	}
+	status = atomic_read(&mos_parport->shadowDSR) & 0xf8;
+	spin_unlock(&release_lock);
+	return status;
+}
+
+static void parport_mos7715_enable_irq(struct parport *pp)
+{
+}
+
+static void parport_mos7715_disable_irq(struct parport *pp)
+{
+}
+
+static void parport_mos7715_data_forward(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+
+	if (parport_prologue(pp) < 0)
+		return;
+	mos7715_change_mode(mos_parport, PS2);
+	mos_parport->shadowDCR &=  ~0x20;
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
+		      mos_parport->shadowDCR);
+	parport_epilogue(pp);
+}
+
+static void parport_mos7715_data_reverse(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+
+	if (parport_prologue(pp) < 0)
+		return;
+	mos7715_change_mode(mos_parport, PS2);
+	mos_parport->shadowDCR |= 0x20;
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
+		      mos_parport->shadowDCR);
+	parport_epilogue(pp);
+}
+
+static void parport_mos7715_init_state(struct pardevice *dev,
+				       struct parport_state *s)
+{
+	s->u.pc.ctr = DCR_INIT_VAL;
+	s->u.pc.ecr = ECR_INIT_VAL;
+}
+
+/* N.B. Parport core code requires that this function not block */
+static void parport_mos7715_save_state(struct parport *pp,
+				       struct parport_state *s)
+{
+	struct mos7715_parport *mos_parport;
+
+	spin_lock(&release_lock);
+	mos_parport = pp->private_data;
+	if (unlikely(mos_parport == NULL)) {	/* release called */
+		spin_unlock(&release_lock);
+		return;
+	}
+	s->u.pc.ctr = mos_parport->shadowDCR;
+	s->u.pc.ecr = mos_parport->shadowECR;
+	spin_unlock(&release_lock);
+}
+
+/* N.B. Parport core code requires that this function not block */
+static void parport_mos7715_restore_state(struct parport *pp,
+					  struct parport_state *s)
+{
+	struct mos7715_parport *mos_parport;
+
+	spin_lock(&release_lock);
+	mos_parport = pp->private_data;
+	if (unlikely(mos_parport == NULL)) {	/* release called */
+		spin_unlock(&release_lock);
+		return;
+	}
+	mos_parport->shadowDCR = s->u.pc.ctr;
+	mos_parport->shadowECR = s->u.pc.ecr;
+
+	schedule_work(&mos_parport->work);
+	spin_unlock(&release_lock);
+}
+
+static size_t parport_mos7715_write_compat(struct parport *pp,
+					   const void *buffer,
+					   size_t len, int flags)
+{
+	int retval;
+	struct mos7715_parport *mos_parport = pp->private_data;
+	int actual_len;
+
+	if (parport_prologue(pp) < 0)
+		return 0;
+	mos7715_change_mode(mos_parport, PPF);
+	retval = usb_bulk_msg(mos_parport->serial->dev,
+			      usb_sndbulkpipe(mos_parport->serial->dev, 2),
+			      (void *)buffer, len, &actual_len,
+			      MOS_WDR_TIMEOUT);
+	parport_epilogue(pp);
+	if (retval) {
+		dev_err(&mos_parport->serial->dev->dev,
+			"mos7720: usb_bulk_msg() failed: %d\n", retval);
+		return 0;
+	}
+	return actual_len;
+}
+
+static struct parport_operations parport_mos7715_ops = {
+	.owner =		THIS_MODULE,
+	.write_data =		parport_mos7715_write_data,
+	.read_data =		parport_mos7715_read_data,
+
+	.write_control =	parport_mos7715_write_control,
+	.read_control =		parport_mos7715_read_control,
+	.frob_control =		parport_mos7715_frob_control,
+
+	.read_status =		parport_mos7715_read_status,
+
+	.enable_irq =		parport_mos7715_enable_irq,
+	.disable_irq =		parport_mos7715_disable_irq,
+
+	.data_forward =		parport_mos7715_data_forward,
+	.data_reverse =		parport_mos7715_data_reverse,
+
+	.init_state =		parport_mos7715_init_state,
+	.save_state =		parport_mos7715_save_state,
+	.restore_state =	parport_mos7715_restore_state,
+
+	.compat_write_data =	parport_mos7715_write_compat,
+
+	.nibble_read_data =	parport_ieee1284_read_nibble,
+	.byte_read_data =	parport_ieee1284_read_byte,
+};
+
+/*
+ * Allocate and initialize parallel port control struct, initialize
+ * the parallel port hardware device, and register with the parport subsystem.
+ */
+static int mos7715_parport_init(struct usb_serial *serial)
+{
+	struct mos7715_parport *mos_parport;
+
+	/* allocate and initialize parallel port control struct */
+	mos_parport = kzalloc(sizeof(struct mos7715_parport), GFP_KERNEL);
+	if (!mos_parport)
+		return -ENOMEM;
+
+	mos_parport->msg_pending = false;
+	kref_init(&mos_parport->ref_count);
+	usb_set_serial_data(serial, mos_parport); /* hijack private pointer */
+	mos_parport->serial = serial;
+	INIT_WORK(&mos_parport->work, deferred_restore_writes);
+	init_completion(&mos_parport->syncmsg_compl);
+
+	/* cycle parallel port reset bit */
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_PP_REG, (__u8)0x80);
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_PP_REG, (__u8)0x00);
+
+	/* initialize device registers */
+	mos_parport->shadowDCR = DCR_INIT_VAL;
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
+		      mos_parport->shadowDCR);
+	mos_parport->shadowECR = ECR_INIT_VAL;
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_ECR,
+		      mos_parport->shadowECR);
+
+	/* register with parport core */
+	mos_parport->pp = parport_register_port(0, PARPORT_IRQ_NONE,
+						PARPORT_DMA_NONE,
+						&parport_mos7715_ops);
+	if (mos_parport->pp == NULL) {
+		dev_err(&serial->interface->dev,
+			"Could not register parport\n");
+		kref_put(&mos_parport->ref_count, destroy_mos_parport);
+		return -EIO;
+	}
+	mos_parport->pp->private_data = mos_parport;
+	mos_parport->pp->modes = PARPORT_MODE_COMPAT | PARPORT_MODE_PCSPP;
+	mos_parport->pp->dev = &serial->interface->dev;
+	parport_announce_port(mos_parport->pp);
+
+	return 0;
+}
+#endif	/* CONFIG_USB_SERIAL_MOS7715_PARPORT */
+
+/*
+ * mos7720_interrupt_callback
+ *	this is the callback function for when we have received data on the
+ *	interrupt endpoint.
+ */
+static void mos7720_interrupt_callback(struct urb *urb)
+{
+	int result;
+	int length;
+	int status = urb->status;
+	struct device *dev = &urb->dev->dev;
+	__u8 *data;
+	__u8 sp1;
+	__u8 sp2;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status);
+		return;
+	default:
+		dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status);
+		goto exit;
+	}
+
+	length = urb->actual_length;
+	data = urb->transfer_buffer;
+
+	/* Moschip get 4 bytes
+	 * Byte 1 IIR Port 1 (port.number is 0)
+	 * Byte 2 IIR Port 2 (port.number is 1)
+	 * Byte 3 --------------
+	 * Byte 4 FIFO status for both */
+
+	/* the above description is inverted
+	 * 	oneukum 2007-03-14 */
+
+	if (unlikely(length != 4)) {
+		dev_dbg(dev, "Wrong data !!!\n");
+		return;
+	}
+
+	sp1 = data[3];
+	sp2 = data[2];
+
+	if ((sp1 | sp2) & 0x01) {
+		/* No Interrupt Pending in both the ports */
+		dev_dbg(dev, "No Interrupt !!!\n");
+	} else {
+		switch (sp1 & 0x0f) {
+		case SERIAL_IIR_RLS:
+			dev_dbg(dev, "Serial Port 1: Receiver status error or address bit detected in 9-bit mode\n");
+			break;
+		case SERIAL_IIR_CTI:
+			dev_dbg(dev, "Serial Port 1: Receiver time out\n");
+			break;
+		case SERIAL_IIR_MS:
+			/* dev_dbg(dev, "Serial Port 1: Modem status change\n"); */
+			break;
+		}
+
+		switch (sp2 & 0x0f) {
+		case SERIAL_IIR_RLS:
+			dev_dbg(dev, "Serial Port 2: Receiver status error or address bit detected in 9-bit mode\n");
+			break;
+		case SERIAL_IIR_CTI:
+			dev_dbg(dev, "Serial Port 2: Receiver time out\n");
+			break;
+		case SERIAL_IIR_MS:
+			/* dev_dbg(dev, "Serial Port 2: Modem status change\n"); */
+			break;
+		}
+	}
+
+exit:
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result)
+		dev_err(dev, "%s - Error %d submitting control urb\n", __func__, result);
+}
+
+/*
+ * mos7715_interrupt_callback
+ *	this is the 7715's callback function for when we have received data on
+ *	the interrupt endpoint.
+ */
+static void mos7715_interrupt_callback(struct urb *urb)
+{
+	int result;
+	int length;
+	int status = urb->status;
+	struct device *dev = &urb->dev->dev;
+	__u8 *data;
+	__u8 iir;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+	case -ENODEV:
+		/* this urb is terminated, clean up */
+		dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status);
+		return;
+	default:
+		dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status);
+		goto exit;
+	}
+
+	length = urb->actual_length;
+	data = urb->transfer_buffer;
+
+	/* Structure of data from 7715 device:
+	 * Byte 1: IIR serial Port
+	 * Byte 2: unused
+	 * Byte 2: DSR parallel port
+	 * Byte 4: FIFO status for both */
+
+	if (unlikely(length != 4)) {
+		dev_dbg(dev, "Wrong data !!!\n");
+		return;
+	}
+
+	iir = data[0];
+	if (!(iir & 0x01)) {	/* serial port interrupt pending */
+		switch (iir & 0x0f) {
+		case SERIAL_IIR_RLS:
+			dev_dbg(dev, "Serial Port: Receiver status error or address bit detected in 9-bit mode\n");
+			break;
+		case SERIAL_IIR_CTI:
+			dev_dbg(dev, "Serial Port: Receiver time out\n");
+			break;
+		case SERIAL_IIR_MS:
+			/* dev_dbg(dev, "Serial Port: Modem status change\n"); */
+			break;
+		}
+	}
+
+#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
+	{       /* update local copy of DSR reg */
+		struct usb_serial_port *port = urb->context;
+		struct mos7715_parport *mos_parport = port->serial->private;
+		if (unlikely(mos_parport == NULL))
+			return;
+		atomic_set(&mos_parport->shadowDSR, data[2]);
+	}
+#endif
+
+exit:
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result)
+		dev_err(dev, "%s - Error %d submitting control urb\n", __func__, result);
+}
+
+/*
+ * mos7720_bulk_in_callback
+ *	this is the callback function for when we have received data on the
+ *	bulk in endpoint.
+ */
+static void mos7720_bulk_in_callback(struct urb *urb)
+{
+	int retval;
+	unsigned char *data ;
+	struct usb_serial_port *port;
+	int status = urb->status;
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status);
+		return;
+	}
+
+	port = urb->context;
+
+	dev_dbg(&port->dev, "Entering...%s\n", __func__);
+
+	data = urb->transfer_buffer;
+
+	if (urb->actual_length) {
+		tty_insert_flip_string(&port->port, data, urb->actual_length);
+		tty_flip_buffer_push(&port->port);
+	}
+
+	if (port->read_urb->status != -EINPROGRESS) {
+		retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+		if (retval)
+			dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval);
+	}
+}
+
+/*
+ * mos7720_bulk_out_data_callback
+ *	this is the callback function for when we have finished sending serial
+ *	data on the bulk out endpoint.
+ */
+static void mos7720_bulk_out_data_callback(struct urb *urb)
+{
+	struct moschip_port *mos7720_port;
+	int status = urb->status;
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "nonzero write bulk status received:%d\n", status);
+		return;
+	}
+
+	mos7720_port = urb->context;
+	if (!mos7720_port) {
+		dev_dbg(&urb->dev->dev, "NULL mos7720_port pointer\n");
+		return ;
+	}
+
+	if (mos7720_port->open)
+		tty_port_tty_wakeup(&mos7720_port->port->port);
+}
+
+static int mos77xx_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds)
+{
+	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
+
+	if (product == MOSCHIP_DEVICE_ID_7715) {
+		/*
+		 * The 7715 uses the first bulk in/out endpoint pair for the
+		 * parallel port, and the second for the serial port. We swap
+		 * the endpoint descriptors here so that the first and
+		 * only registered port structure uses the serial-port
+		 * endpoints.
+		 */
+		swap(epds->bulk_in[0], epds->bulk_in[1]);
+		swap(epds->bulk_out[0], epds->bulk_out[1]);
+
+		return 1;
+	}
+
+	return 2;
+}
+
+static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_serial *serial;
+	struct urb *urb;
+	struct moschip_port *mos7720_port;
+	int response;
+	int port_number;
+	__u8 data;
+	int allocated_urbs = 0;
+	int j;
+
+	serial = port->serial;
+
+	mos7720_port = usb_get_serial_port_data(port);
+	if (mos7720_port == NULL)
+		return -ENODEV;
+
+	usb_clear_halt(serial->dev, port->write_urb->pipe);
+	usb_clear_halt(serial->dev, port->read_urb->pipe);
+
+	/* Initialising the write urb pool */
+	for (j = 0; j < NUM_URBS; ++j) {
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		mos7720_port->write_urb_pool[j] = urb;
+		if (!urb)
+			continue;
+
+		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
+					       GFP_KERNEL);
+		if (!urb->transfer_buffer) {
+			usb_free_urb(mos7720_port->write_urb_pool[j]);
+			mos7720_port->write_urb_pool[j] = NULL;
+			continue;
+		}
+		allocated_urbs++;
+	}
+
+	if (!allocated_urbs)
+		return -ENOMEM;
+
+	 /* Initialize MCS7720 -- Write Init values to corresponding Registers
+	  *
+	  * Register Index
+	  * 0 : MOS7720_THR/MOS7720_RHR
+	  * 1 : MOS7720_IER
+	  * 2 : MOS7720_FCR
+	  * 3 : MOS7720_LCR
+	  * 4 : MOS7720_MCR
+	  * 5 : MOS7720_LSR
+	  * 6 : MOS7720_MSR
+	  * 7 : MOS7720_SPR
+	  *
+	  * 0x08 : SP1/2 Control Reg
+	  */
+	port_number = port->port_number;
+	read_mos_reg(serial, port_number, MOS7720_LSR, &data);
+
+	dev_dbg(&port->dev, "SS::%p LSR:%x\n", mos7720_port, data);
+
+	write_mos_reg(serial, dummy, MOS7720_SP1_REG, 0x02);
+	write_mos_reg(serial, dummy, MOS7720_SP2_REG, 0x02);
+
+	write_mos_reg(serial, port_number, MOS7720_IER, 0x00);
+	write_mos_reg(serial, port_number, MOS7720_FCR, 0x00);
+
+	write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf);
+	mos7720_port->shadowLCR = 0x03;
+	write_mos_reg(serial, port_number, MOS7720_LCR,
+		      mos7720_port->shadowLCR);
+	mos7720_port->shadowMCR = 0x0b;
+	write_mos_reg(serial, port_number, MOS7720_MCR,
+		      mos7720_port->shadowMCR);
+
+	write_mos_reg(serial, port_number, MOS7720_SP_CONTROL_REG, 0x00);
+	read_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, &data);
+	data = data | (port->port_number + 1);
+	write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, data);
+	mos7720_port->shadowLCR = 0x83;
+	write_mos_reg(serial, port_number, MOS7720_LCR,
+		      mos7720_port->shadowLCR);
+	write_mos_reg(serial, port_number, MOS7720_THR, 0x0c);
+	write_mos_reg(serial, port_number, MOS7720_IER, 0x00);
+	mos7720_port->shadowLCR = 0x03;
+	write_mos_reg(serial, port_number, MOS7720_LCR,
+		      mos7720_port->shadowLCR);
+	write_mos_reg(serial, port_number, MOS7720_IER, 0x0c);
+
+	response = usb_submit_urb(port->read_urb, GFP_KERNEL);
+	if (response)
+		dev_err(&port->dev, "%s - Error %d submitting read urb\n",
+							__func__, response);
+
+	/* initialize our port settings */
+	mos7720_port->shadowMCR = UART_MCR_OUT2; /* Must set to enable ints! */
+
+	/* send a open port command */
+	mos7720_port->open = 1;
+
+	return 0;
+}
+
+/*
+ * mos7720_chars_in_buffer
+ *	this function is called by the tty driver when it wants to know how many
+ *	bytes of data we currently have outstanding in the port (data that has
+ *	been written, but hasn't made it out the port yet)
+ */
+static unsigned int mos7720_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
+	int i;
+	unsigned int chars = 0;
+
+	for (i = 0; i < NUM_URBS; ++i) {
+		if (mos7720_port->write_urb_pool[i] &&
+		    mos7720_port->write_urb_pool[i]->status == -EINPROGRESS)
+			chars += URB_TRANSFER_BUFFER_SIZE;
+	}
+	dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars);
+	return chars;
+}
+
+static void mos7720_close(struct usb_serial_port *port)
+{
+	struct usb_serial *serial;
+	struct moschip_port *mos7720_port;
+	int j;
+
+	serial = port->serial;
+
+	mos7720_port = usb_get_serial_port_data(port);
+	if (mos7720_port == NULL)
+		return;
+
+	for (j = 0; j < NUM_URBS; ++j)
+		usb_kill_urb(mos7720_port->write_urb_pool[j]);
+
+	/* Freeing Write URBs */
+	for (j = 0; j < NUM_URBS; ++j) {
+		if (mos7720_port->write_urb_pool[j]) {
+			kfree(mos7720_port->write_urb_pool[j]->transfer_buffer);
+			usb_free_urb(mos7720_port->write_urb_pool[j]);
+		}
+	}
+
+	/* While closing port, shutdown all bulk read, write  *
+	 * and interrupt read if they exists, otherwise nop   */
+	usb_kill_urb(port->write_urb);
+	usb_kill_urb(port->read_urb);
+
+	write_mos_reg(serial, port->port_number, MOS7720_MCR, 0x00);
+	write_mos_reg(serial, port->port_number, MOS7720_IER, 0x00);
+
+	mos7720_port->open = 0;
+}
+
+static void mos7720_break(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned char data;
+	struct usb_serial *serial;
+	struct moschip_port *mos7720_port;
+
+	serial = port->serial;
+
+	mos7720_port = usb_get_serial_port_data(port);
+	if (mos7720_port == NULL)
+		return;
+
+	if (break_state == -1)
+		data = mos7720_port->shadowLCR | UART_LCR_SBC;
+	else
+		data = mos7720_port->shadowLCR & ~UART_LCR_SBC;
+
+	mos7720_port->shadowLCR  = data;
+	write_mos_reg(serial, port->port_number, MOS7720_LCR,
+		      mos7720_port->shadowLCR);
+}
+
+/*
+ * mos7720_write_room
+ *	this function is called by the tty driver when it wants to know how many
+ *	bytes of data we can accept for a specific port.
+ */
+static unsigned int mos7720_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
+	unsigned int room = 0;
+	int i;
+
+	/* FIXME: Locking */
+	for (i = 0; i < NUM_URBS; ++i) {
+		if (mos7720_port->write_urb_pool[i] &&
+		    mos7720_port->write_urb_pool[i]->status != -EINPROGRESS)
+			room += URB_TRANSFER_BUFFER_SIZE;
+	}
+
+	dev_dbg(&port->dev, "%s - returns %u\n", __func__, room);
+	return room;
+}
+
+static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
+				 const unsigned char *data, int count)
+{
+	int status;
+	int i;
+	int bytes_sent = 0;
+	int transfer_size;
+
+	struct moschip_port *mos7720_port;
+	struct usb_serial *serial;
+	struct urb    *urb;
+	const unsigned char *current_position = data;
+
+	serial = port->serial;
+
+	mos7720_port = usb_get_serial_port_data(port);
+	if (mos7720_port == NULL)
+		return -ENODEV;
+
+	/* try to find a free urb in the list */
+	urb = NULL;
+
+	for (i = 0; i < NUM_URBS; ++i) {
+		if (mos7720_port->write_urb_pool[i] &&
+		    mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) {
+			urb = mos7720_port->write_urb_pool[i];
+			dev_dbg(&port->dev, "URB:%d\n", i);
+			break;
+		}
+	}
+
+	if (urb == NULL) {
+		dev_dbg(&port->dev, "%s - no more free urbs\n", __func__);
+		goto exit;
+	}
+
+	if (urb->transfer_buffer == NULL) {
+		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
+					       GFP_ATOMIC);
+		if (!urb->transfer_buffer) {
+			bytes_sent = -ENOMEM;
+			goto exit;
+		}
+	}
+	transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
+
+	memcpy(urb->transfer_buffer, current_position, transfer_size);
+	usb_serial_debug_data(&port->dev, __func__, transfer_size,
+			      urb->transfer_buffer);
+
+	/* fill urb with data and submit  */
+	usb_fill_bulk_urb(urb, serial->dev,
+			  usb_sndbulkpipe(serial->dev,
+					port->bulk_out_endpointAddress),
+			  urb->transfer_buffer, transfer_size,
+			  mos7720_bulk_out_data_callback, mos7720_port);
+
+	/* send it down the pipe */
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status) {
+		dev_err_console(port, "%s - usb_submit_urb(write bulk) failed "
+			"with status = %d\n", __func__, status);
+		bytes_sent = status;
+		goto exit;
+	}
+	bytes_sent = transfer_size;
+
+exit:
+	return bytes_sent;
+}
+
+static void mos7720_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7720_port;
+	int status;
+
+	mos7720_port = usb_get_serial_port_data(port);
+
+	if (mos7720_port == NULL)
+		return;
+
+	if (!mos7720_port->open) {
+		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
+		return;
+	}
+
+	/* if we are implementing XON/XOFF, send the stop character */
+	if (I_IXOFF(tty)) {
+		unsigned char stop_char = STOP_CHAR(tty);
+		status = mos7720_write(tty, port, &stop_char, 1);
+		if (status <= 0)
+			return;
+	}
+
+	/* if we are implementing RTS/CTS, toggle that line */
+	if (C_CRTSCTS(tty)) {
+		mos7720_port->shadowMCR &= ~UART_MCR_RTS;
+		write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
+			      mos7720_port->shadowMCR);
+	}
+}
+
+static void mos7720_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
+	int status;
+
+	if (mos7720_port == NULL)
+		return;
+
+	if (!mos7720_port->open) {
+		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
+		return;
+	}
+
+	/* if we are implementing XON/XOFF, send the start character */
+	if (I_IXOFF(tty)) {
+		unsigned char start_char = START_CHAR(tty);
+		status = mos7720_write(tty, port, &start_char, 1);
+		if (status <= 0)
+			return;
+	}
+
+	/* if we are implementing RTS/CTS, toggle that line */
+	if (C_CRTSCTS(tty)) {
+		mos7720_port->shadowMCR |= UART_MCR_RTS;
+		write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
+			      mos7720_port->shadowMCR);
+	}
+}
+
+/* FIXME: this function does not work */
+static int set_higher_rates(struct moschip_port *mos7720_port,
+			    unsigned int baud)
+{
+	struct usb_serial_port *port;
+	struct usb_serial *serial;
+	int port_number;
+	enum mos_regs sp_reg;
+	if (mos7720_port == NULL)
+		return -EINVAL;
+
+	port = mos7720_port->port;
+	serial = port->serial;
+
+	 /***********************************************
+	 *      Init Sequence for higher rates
+	 ***********************************************/
+	dev_dbg(&port->dev, "Sending Setting Commands ..........\n");
+	port_number = port->port_number;
+
+	write_mos_reg(serial, port_number, MOS7720_IER, 0x00);
+	write_mos_reg(serial, port_number, MOS7720_FCR, 0x00);
+	write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf);
+	mos7720_port->shadowMCR = 0x0b;
+	write_mos_reg(serial, port_number, MOS7720_MCR,
+		      mos7720_port->shadowMCR);
+	write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, 0x00);
+
+	/***********************************************
+	 *              Set for higher rates           *
+	 ***********************************************/
+	/* writing baud rate verbatum into uart clock field clearly not right */
+	if (port_number == 0)
+		sp_reg = MOS7720_SP1_REG;
+	else
+		sp_reg = MOS7720_SP2_REG;
+	write_mos_reg(serial, dummy, sp_reg, baud * 0x10);
+	write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, 0x03);
+	mos7720_port->shadowMCR = 0x2b;
+	write_mos_reg(serial, port_number, MOS7720_MCR,
+		      mos7720_port->shadowMCR);
+
+	/***********************************************
+	 *              Set DLL/DLM
+	 ***********************************************/
+	mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB;
+	write_mos_reg(serial, port_number, MOS7720_LCR,
+		      mos7720_port->shadowLCR);
+	write_mos_reg(serial, port_number, MOS7720_DLL, 0x01);
+	write_mos_reg(serial, port_number, MOS7720_DLM, 0x00);
+	mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
+	write_mos_reg(serial, port_number, MOS7720_LCR,
+		      mos7720_port->shadowLCR);
+
+	return 0;
+}
+
+/* baud rate information */
+struct divisor_table_entry {
+	__u32  baudrate;
+	__u16  divisor;
+};
+
+/* Define table of divisors for moschip 7720 hardware	   *
+ * These assume a 3.6864MHz crystal, the standard /16, and *
+ * MCR.7 = 0.						   */
+static const struct divisor_table_entry divisor_table[] = {
+	{   50,		2304},
+	{   110,	1047},	/* 2094.545455 => 230450   => .0217 % over */
+	{   134,	857},	/* 1713.011152 => 230398.5 => .00065% under */
+	{   150,	768},
+	{   300,	384},
+	{   600,	192},
+	{   1200,	96},
+	{   1800,	64},
+	{   2400,	48},
+	{   4800,	24},
+	{   7200,	16},
+	{   9600,	12},
+	{   19200,	6},
+	{   38400,	3},
+	{   57600,	2},
+	{   115200,	1},
+};
+
+/*****************************************************************************
+ * calc_baud_rate_divisor
+ *	this function calculates the proper baud rate divisor for the specified
+ *	baud rate.
+ *****************************************************************************/
+static int calc_baud_rate_divisor(struct usb_serial_port *port, int baudrate, int *divisor)
+{
+	int i;
+	__u16 custom;
+	__u16 round1;
+	__u16 round;
+
+
+	dev_dbg(&port->dev, "%s - %d\n", __func__, baudrate);
+
+	for (i = 0; i < ARRAY_SIZE(divisor_table); i++) {
+		if (divisor_table[i].baudrate == baudrate) {
+			*divisor = divisor_table[i].divisor;
+			return 0;
+		}
+	}
+
+	/* After trying for all the standard baud rates    *
+	 * Try calculating the divisor for this baud rate  */
+	if (baudrate > 75 &&  baudrate < 230400) {
+		/* get the divisor */
+		custom = (__u16)(230400L  / baudrate);
+
+		/* Check for round off */
+		round1 = (__u16)(2304000L / baudrate);
+		round = (__u16)(round1 - (custom * 10));
+		if (round > 4)
+			custom++;
+		*divisor = custom;
+
+		dev_dbg(&port->dev, "Baud %d = %d\n", baudrate, custom);
+		return 0;
+	}
+
+	dev_dbg(&port->dev, "Baud calculation Failed...\n");
+	return -EINVAL;
+}
+
+/*
+ * send_cmd_write_baud_rate
+ *	this function sends the proper command to change the baud rate of the
+ *	specified port.
+ */
+static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
+				    int baudrate)
+{
+	struct usb_serial_port *port;
+	struct usb_serial *serial;
+	int divisor;
+	int status;
+	unsigned char number;
+
+	if (mos7720_port == NULL)
+		return -1;
+
+	port = mos7720_port->port;
+	serial = port->serial;
+
+	number = port->port_number;
+	dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudrate);
+
+	/* Calculate the Divisor */
+	status = calc_baud_rate_divisor(port, baudrate, &divisor);
+	if (status) {
+		dev_err(&port->dev, "%s - bad baud rate\n", __func__);
+		return status;
+	}
+
+	/* Enable access to divisor latch */
+	mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB;
+	write_mos_reg(serial, number, MOS7720_LCR, mos7720_port->shadowLCR);
+
+	/* Write the divisor */
+	write_mos_reg(serial, number, MOS7720_DLL, (__u8)(divisor & 0xff));
+	write_mos_reg(serial, number, MOS7720_DLM,
+		      (__u8)((divisor & 0xff00) >> 8));
+
+	/* Disable access to divisor latch */
+	mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
+	write_mos_reg(serial, number, MOS7720_LCR, mos7720_port->shadowLCR);
+
+	return status;
+}
+
+/*
+ * change_port_settings
+ *	This routine is called to set the UART on the device to match
+ *      the specified new settings.
+ */
+static void change_port_settings(struct tty_struct *tty,
+				 struct moschip_port *mos7720_port,
+				 const struct ktermios *old_termios)
+{
+	struct usb_serial_port *port;
+	struct usb_serial *serial;
+	int baud;
+	unsigned cflag;
+	__u8 lData;
+	__u8 lParity;
+	__u8 lStop;
+	int status;
+	int port_number;
+
+	if (mos7720_port == NULL)
+		return ;
+
+	port = mos7720_port->port;
+	serial = port->serial;
+	port_number = port->port_number;
+
+	if (!mos7720_port->open) {
+		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
+		return;
+	}
+
+	lStop = 0x00;	/* 1 stop bit */
+	lParity = 0x00;	/* No parity */
+
+	cflag = tty->termios.c_cflag;
+
+	lData = UART_LCR_WLEN(tty_get_char_size(cflag));
+
+	/* Change the Parity bit */
+	if (cflag & PARENB) {
+		if (cflag & PARODD) {
+			lParity = UART_LCR_PARITY;
+			dev_dbg(&port->dev, "%s - parity = odd\n", __func__);
+		} else {
+			lParity = (UART_LCR_EPAR | UART_LCR_PARITY);
+			dev_dbg(&port->dev, "%s - parity = even\n", __func__);
+		}
+
+	} else {
+		dev_dbg(&port->dev, "%s - parity = none\n", __func__);
+	}
+
+	if (cflag & CMSPAR)
+		lParity = lParity | 0x20;
+
+	/* Change the Stop bit */
+	if (cflag & CSTOPB) {
+		lStop = UART_LCR_STOP;
+		dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__);
+	} else {
+		lStop = 0x00;
+		dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__);
+	}
+
+#define LCR_BITS_MASK		0x03	/* Mask for bits/char field */
+#define LCR_STOP_MASK		0x04	/* Mask for stop bits field */
+#define LCR_PAR_MASK		0x38	/* Mask for parity field */
+
+	/* Update the LCR with the correct value */
+	mos7720_port->shadowLCR &=
+		~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
+	mos7720_port->shadowLCR |= (lData | lParity | lStop);
+
+
+	/* Disable Interrupts */
+	write_mos_reg(serial, port_number, MOS7720_IER, 0x00);
+	write_mos_reg(serial, port_number, MOS7720_FCR, 0x00);
+	write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf);
+
+	/* Send the updated LCR value to the mos7720 */
+	write_mos_reg(serial, port_number, MOS7720_LCR,
+		      mos7720_port->shadowLCR);
+	mos7720_port->shadowMCR = 0x0b;
+	write_mos_reg(serial, port_number, MOS7720_MCR,
+		      mos7720_port->shadowMCR);
+
+	/* set up the MCR register and send it to the mos7720 */
+	mos7720_port->shadowMCR = UART_MCR_OUT2;
+	if (cflag & CBAUD)
+		mos7720_port->shadowMCR |= (UART_MCR_DTR | UART_MCR_RTS);
+
+	if (cflag & CRTSCTS) {
+		mos7720_port->shadowMCR |= (UART_MCR_XONANY);
+		/* To set hardware flow control to the specified *
+		 * serial port, in SP1/2_CONTROL_REG             */
+		if (port_number)
+			write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG,
+				      0x01);
+		else
+			write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG,
+				      0x02);
+
+	} else
+		mos7720_port->shadowMCR &= ~(UART_MCR_XONANY);
+
+	write_mos_reg(serial, port_number, MOS7720_MCR,
+		      mos7720_port->shadowMCR);
+
+	/* Determine divisor based on baud rate */
+	baud = tty_get_baud_rate(tty);
+	if (!baud) {
+		/* pick a default, any default... */
+		dev_dbg(&port->dev, "Picked default baud...\n");
+		baud = 9600;
+	}
+
+	if (baud >= 230400) {
+		set_higher_rates(mos7720_port, baud);
+		/* Enable Interrupts */
+		write_mos_reg(serial, port_number, MOS7720_IER, 0x0c);
+		return;
+	}
+
+	dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud);
+	status = send_cmd_write_baud_rate(mos7720_port, baud);
+	/* FIXME: needs to write actual resulting baud back not just
+	   blindly do so */
+	if (cflag & CBAUD)
+		tty_encode_baud_rate(tty, baud, baud);
+	/* Enable Interrupts */
+	write_mos_reg(serial, port_number, MOS7720_IER, 0x0c);
+
+	if (port->read_urb->status != -EINPROGRESS) {
+		status = usb_submit_urb(port->read_urb, GFP_KERNEL);
+		if (status)
+			dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status);
+	}
+}
+
+/*
+ * mos7720_set_termios
+ *	this function is called by the tty driver when it wants to change the
+ *	termios structure.
+ */
+static void mos7720_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
+				const struct ktermios *old_termios)
+{
+	int status;
+	struct moschip_port *mos7720_port;
+
+	mos7720_port = usb_get_serial_port_data(port);
+
+	if (mos7720_port == NULL)
+		return;
+
+	if (!mos7720_port->open) {
+		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
+		return;
+	}
+
+	/* change the port settings to the new ones specified */
+	change_port_settings(tty, mos7720_port, old_termios);
+
+	if (port->read_urb->status != -EINPROGRESS) {
+		status = usb_submit_urb(port->read_urb, GFP_KERNEL);
+		if (status)
+			dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status);
+	}
+}
+
+/*
+ * get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * 	    is emptied.  On bus types like RS485, the transmitter must
+ * 	    release the bus after transmitting. This must be done when
+ * 	    the transmit shift register is empty, not be done when the
+ * 	    transmit holding register is empty.  This functionality
+ * 	    allows an RS485 driver to be written in user space.
+ */
+static int get_lsr_info(struct tty_struct *tty,
+		struct moschip_port *mos7720_port, unsigned int __user *value)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned int result = 0;
+	unsigned char data = 0;
+	int port_number = port->port_number;
+	int count;
+
+	count = mos7720_chars_in_buffer(tty);
+	if (count == 0) {
+		read_mos_reg(port->serial, port_number, MOS7720_LSR, &data);
+		if ((data & (UART_LSR_TEMT | UART_LSR_THRE))
+					== (UART_LSR_TEMT | UART_LSR_THRE)) {
+			dev_dbg(&port->dev, "%s -- Empty\n", __func__);
+			result = TIOCSER_TEMT;
+		}
+	}
+	if (copy_to_user(value, &result, sizeof(int)))
+		return -EFAULT;
+	return 0;
+}
+
+static int mos7720_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
+	unsigned int result = 0;
+	unsigned int mcr ;
+	unsigned int msr ;
+
+	mcr = mos7720_port->shadowMCR;
+	msr = mos7720_port->shadowMSR;
+
+	result = ((mcr & UART_MCR_DTR)  ? TIOCM_DTR : 0)   /* 0x002 */
+	  | ((mcr & UART_MCR_RTS)   ? TIOCM_RTS : 0)   /* 0x004 */
+	  | ((msr & UART_MSR_CTS)   ? TIOCM_CTS : 0)   /* 0x020 */
+	  | ((msr & UART_MSR_DCD)   ? TIOCM_CAR : 0)   /* 0x040 */
+	  | ((msr & UART_MSR_RI)    ? TIOCM_RI :  0)   /* 0x080 */
+	  | ((msr & UART_MSR_DSR)   ? TIOCM_DSR : 0);  /* 0x100 */
+
+	return result;
+}
+
+static int mos7720_tiocmset(struct tty_struct *tty,
+			    unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
+	unsigned int mcr ;
+
+	mcr = mos7720_port->shadowMCR;
+
+	if (set & TIOCM_RTS)
+		mcr |= UART_MCR_RTS;
+	if (set & TIOCM_DTR)
+		mcr |= UART_MCR_DTR;
+	if (set & TIOCM_LOOP)
+		mcr |= UART_MCR_LOOP;
+
+	if (clear & TIOCM_RTS)
+		mcr &= ~UART_MCR_RTS;
+	if (clear & TIOCM_DTR)
+		mcr &= ~UART_MCR_DTR;
+	if (clear & TIOCM_LOOP)
+		mcr &= ~UART_MCR_LOOP;
+
+	mos7720_port->shadowMCR = mcr;
+	write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
+		      mos7720_port->shadowMCR);
+
+	return 0;
+}
+
+static int mos7720_ioctl(struct tty_struct *tty,
+			 unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7720_port;
+
+	mos7720_port = usb_get_serial_port_data(port);
+	if (mos7720_port == NULL)
+		return -ENODEV;
+
+	switch (cmd) {
+	case TIOCSERGETLSR:
+		dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__);
+		return get_lsr_info(tty, mos7720_port,
+					(unsigned int __user *)arg);
+	}
+
+	return -ENOIOCTLCMD;
+}
+
+static int mos7720_startup(struct usb_serial *serial)
+{
+	struct usb_device *dev;
+	char data;
+	u16 product;
+	int ret_val;
+
+	product = le16_to_cpu(serial->dev->descriptor.idProduct);
+	dev = serial->dev;
+
+	if (product == MOSCHIP_DEVICE_ID_7715) {
+		struct urb *urb = serial->port[0]->interrupt_in_urb;
+
+		urb->complete = mos7715_interrupt_callback;
+
+#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
+		ret_val = mos7715_parport_init(serial);
+		if (ret_val < 0)
+			return ret_val;
+#endif
+	}
+	/* start the interrupt urb */
+	ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
+	if (ret_val) {
+		dev_err(&dev->dev, "failed to submit interrupt urb: %d\n",
+			ret_val);
+	}
+
+	/* LSR For Port 1 */
+	read_mos_reg(serial, 0, MOS7720_LSR, &data);
+	dev_dbg(&dev->dev, "LSR:%x\n", data);
+
+	return 0;
+}
+
+static void mos7720_release(struct usb_serial *serial)
+{
+	usb_kill_urb(serial->port[0]->interrupt_in_urb);
+
+#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
+	/* close the parallel port */
+
+	if (le16_to_cpu(serial->dev->descriptor.idProduct)
+	    == MOSCHIP_DEVICE_ID_7715) {
+		struct mos7715_parport *mos_parport =
+			usb_get_serial_data(serial);
+
+		/* prevent NULL ptr dereference in port callbacks */
+		spin_lock(&release_lock);
+		mos_parport->pp->private_data = NULL;
+		spin_unlock(&release_lock);
+
+		/* wait for synchronous usb calls to return */
+		if (mos_parport->msg_pending)
+			wait_for_completion_timeout(&mos_parport->syncmsg_compl,
+					    msecs_to_jiffies(MOS_WDR_TIMEOUT));
+		/*
+		 * If delayed work is currently scheduled, wait for it to
+		 * complete. This also implies barriers that ensure the
+		 * below serial clearing is not hoisted above the ->work.
+		 */
+		cancel_work_sync(&mos_parport->work);
+
+		parport_remove_port(mos_parport->pp);
+		usb_set_serial_data(serial, NULL);
+		mos_parport->serial = NULL;
+
+		parport_del_port(mos_parport->pp);
+
+		kref_put(&mos_parport->ref_count, destroy_mos_parport);
+	}
+#endif
+}
+
+static int mos7720_port_probe(struct usb_serial_port *port)
+{
+	struct moschip_port *mos7720_port;
+
+	mos7720_port = kzalloc(sizeof(*mos7720_port), GFP_KERNEL);
+	if (!mos7720_port)
+		return -ENOMEM;
+
+	mos7720_port->port = port;
+
+	usb_set_serial_port_data(port, mos7720_port);
+
+	return 0;
+}
+
+static void mos7720_port_remove(struct usb_serial_port *port)
+{
+	struct moschip_port *mos7720_port;
+
+	mos7720_port = usb_get_serial_port_data(port);
+	kfree(mos7720_port);
+}
+
+static struct usb_serial_driver moschip7720_2port_driver = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"moschip7720",
+	},
+	.description		= "Moschip 2 port adapter",
+	.id_table		= id_table,
+	.num_bulk_in		= 2,
+	.num_bulk_out		= 2,
+	.num_interrupt_in	= 1,
+	.calc_num_ports		= mos77xx_calc_num_ports,
+	.open			= mos7720_open,
+	.close			= mos7720_close,
+	.throttle		= mos7720_throttle,
+	.unthrottle		= mos7720_unthrottle,
+	.attach			= mos7720_startup,
+	.release		= mos7720_release,
+	.port_probe		= mos7720_port_probe,
+	.port_remove		= mos7720_port_remove,
+	.ioctl			= mos7720_ioctl,
+	.tiocmget		= mos7720_tiocmget,
+	.tiocmset		= mos7720_tiocmset,
+	.set_termios		= mos7720_set_termios,
+	.write			= mos7720_write,
+	.write_room		= mos7720_write_room,
+	.chars_in_buffer	= mos7720_chars_in_buffer,
+	.break_ctl		= mos7720_break,
+	.read_bulk_callback	= mos7720_bulk_in_callback,
+	.read_int_callback	= mos7720_interrupt_callback,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&moschip7720_2port_driver, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
new file mode 100644
index 000000000..6b12bb464
--- /dev/null
+++ b/drivers/usb/serial/mos7840.c
@@ -0,0 +1,1775 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Clean ups from Moschip version and a few ioctl implementations by:
+ *	Paul B Schroeder <pschroeder "at" uplogix "dot" com>
+ *
+ * Originally based on drivers/usb/serial/io_edgeport.c which is:
+ *      Copyright (C) 2000 Inside Out Networks, All rights reserved.
+ *      Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+#define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver"
+
+/*
+ * 16C50 UART register defines
+ */
+
+#define LCR_BITS_5             0x00	/* 5 bits/char */
+#define LCR_BITS_6             0x01	/* 6 bits/char */
+#define LCR_BITS_7             0x02	/* 7 bits/char */
+#define LCR_BITS_8             0x03	/* 8 bits/char */
+#define LCR_BITS_MASK          0x03	/* Mask for bits/char field */
+
+#define LCR_STOP_1             0x00	/* 1 stop bit */
+#define LCR_STOP_1_5           0x04	/* 1.5 stop bits (if 5   bits/char) */
+#define LCR_STOP_2             0x04	/* 2 stop bits   (if 6-8 bits/char) */
+#define LCR_STOP_MASK          0x04	/* Mask for stop bits field */
+
+#define LCR_PAR_NONE           0x00	/* No parity */
+#define LCR_PAR_ODD            0x08	/* Odd parity */
+#define LCR_PAR_EVEN           0x18	/* Even parity */
+#define LCR_PAR_MARK           0x28	/* Force parity bit to 1 */
+#define LCR_PAR_SPACE          0x38	/* Force parity bit to 0 */
+#define LCR_PAR_MASK           0x38	/* Mask for parity field */
+
+#define LCR_SET_BREAK          0x40	/* Set Break condition */
+#define LCR_DL_ENABLE          0x80	/* Enable access to divisor latch */
+
+#define MCR_DTR                0x01	/* Assert DTR */
+#define MCR_RTS                0x02	/* Assert RTS */
+#define MCR_OUT1               0x04	/* Loopback only: Sets state of RI */
+#define MCR_MASTER_IE          0x08	/* Enable interrupt outputs */
+#define MCR_LOOPBACK           0x10	/* Set internal (digital) loopback mode */
+#define MCR_XON_ANY            0x20	/* Enable any char to exit XOFF mode */
+
+#define MOS7840_MSR_CTS        0x10	/* Current state of CTS */
+#define MOS7840_MSR_DSR        0x20	/* Current state of DSR */
+#define MOS7840_MSR_RI         0x40	/* Current state of RI */
+#define MOS7840_MSR_CD         0x80	/* Current state of CD */
+
+/*
+ * Defines used for sending commands to port
+ */
+
+#define MOS_WDR_TIMEOUT		5000	/* default urb timeout */
+
+#define MOS_PORT1       0x0200
+#define MOS_PORT2       0x0300
+#define MOS_VENREG      0x0000
+#define MOS_MAX_PORT	0x02
+#define MOS_WRITE       0x0E
+#define MOS_READ        0x0D
+
+/* Requests */
+#define MCS_RD_RTYPE    0xC0
+#define MCS_WR_RTYPE    0x40
+#define MCS_RDREQ       0x0D
+#define MCS_WRREQ       0x0E
+#define MCS_CTRL_TIMEOUT        500
+#define VENDOR_READ_LENGTH      (0x01)
+
+#define MAX_NAME_LEN    64
+
+#define ZLP_REG1  0x3A		/* Zero_Flag_Reg1    58 */
+#define ZLP_REG5  0x3E		/* Zero_Flag_Reg5    62 */
+
+/* For higher baud Rates use TIOCEXBAUD */
+#define TIOCEXBAUD     0x5462
+
+/*
+ * Vendor id and device id defines
+ *
+ * NOTE: Do not add new defines, add entries directly to the id_table instead.
+ */
+#define USB_VENDOR_ID_BANDB              0x0856
+#define BANDB_DEVICE_ID_USO9ML2_2        0xAC22
+#define BANDB_DEVICE_ID_USO9ML2_2P       0xBC00
+#define BANDB_DEVICE_ID_USO9ML2_4        0xAC24
+#define BANDB_DEVICE_ID_USO9ML2_4P       0xBC01
+#define BANDB_DEVICE_ID_US9ML2_2         0xAC29
+#define BANDB_DEVICE_ID_US9ML2_4         0xAC30
+#define BANDB_DEVICE_ID_USPTL4_2         0xAC31
+#define BANDB_DEVICE_ID_USPTL4_4         0xAC32
+#define BANDB_DEVICE_ID_USOPTL4_2        0xAC42
+#define BANDB_DEVICE_ID_USOPTL4_2P       0xBC02
+#define BANDB_DEVICE_ID_USOPTL4_4        0xAC44
+#define BANDB_DEVICE_ID_USOPTL4_4P       0xBC03
+
+/* Interrupt Routine Defines    */
+
+#define SERIAL_IIR_RLS      0x06
+#define SERIAL_IIR_MS       0x00
+
+/*
+ *  Emulation of the bit mask on the LINE STATUS REGISTER.
+ */
+#define SERIAL_LSR_DR       0x0001
+#define SERIAL_LSR_OE       0x0002
+#define SERIAL_LSR_PE       0x0004
+#define SERIAL_LSR_FE       0x0008
+#define SERIAL_LSR_BI       0x0010
+
+#define MOS_MSR_DELTA_CTS   0x10
+#define MOS_MSR_DELTA_DSR   0x20
+#define MOS_MSR_DELTA_RI    0x40
+#define MOS_MSR_DELTA_CD    0x80
+
+/* Serial Port register Address */
+#define INTERRUPT_ENABLE_REGISTER  ((__u16)(0x01))
+#define FIFO_CONTROL_REGISTER      ((__u16)(0x02))
+#define LINE_CONTROL_REGISTER      ((__u16)(0x03))
+#define MODEM_CONTROL_REGISTER     ((__u16)(0x04))
+#define LINE_STATUS_REGISTER       ((__u16)(0x05))
+#define MODEM_STATUS_REGISTER      ((__u16)(0x06))
+#define SCRATCH_PAD_REGISTER       ((__u16)(0x07))
+#define DIVISOR_LATCH_LSB          ((__u16)(0x00))
+#define DIVISOR_LATCH_MSB          ((__u16)(0x01))
+
+#define CLK_MULTI_REGISTER         ((__u16)(0x02))
+#define CLK_START_VALUE_REGISTER   ((__u16)(0x03))
+#define GPIO_REGISTER              ((__u16)(0x07))
+
+#define SERIAL_LCR_DLAB            ((__u16)(0x0080))
+
+/*
+ * URB POOL related defines
+ */
+#define NUM_URBS                        16	/* URB Count */
+#define URB_TRANSFER_BUFFER_SIZE        32	/* URB Size  */
+
+/* LED on/off milliseconds*/
+#define LED_ON_MS	500
+#define LED_OFF_MS	500
+
+enum mos7840_flag {
+	MOS7840_FLAG_LED_BUSY,
+};
+
+#define MCS_PORT_MASK	GENMASK(2, 0)
+#define MCS_PORTS(nr)	((nr) & MCS_PORT_MASK)
+#define MCS_LED		BIT(3)
+
+#define MCS_DEVICE(vid, pid, flags) \
+		USB_DEVICE((vid), (pid)), .driver_info = (flags)
+
+static const struct usb_device_id id_table[] = {
+	{ MCS_DEVICE(0x0557, 0x2011, MCS_PORTS(4)) },	/* ATEN UC2324 */
+	{ MCS_DEVICE(0x0557, 0x7820, MCS_PORTS(2)) },	/* ATEN UC2322 */
+	{ MCS_DEVICE(0x110a, 0x2210, MCS_PORTS(2)) },	/* Moxa UPort 2210 */
+	{ MCS_DEVICE(0x9710, 0x7810, MCS_PORTS(1) | MCS_LED) }, /* ASIX MCS7810 */
+	{ MCS_DEVICE(0x9710, 0x7820, MCS_PORTS(2)) },	/* MosChip MCS7820 */
+	{ MCS_DEVICE(0x9710, 0x7840, MCS_PORTS(4)) },	/* MosChip MCS7840 */
+	{ MCS_DEVICE(0x9710, 0x7843, MCS_PORTS(3)) },	/* ASIX MCS7840 3 port */
+	{ USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2) },
+	{ USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P) },
+	{ USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4P) },
+	{ USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_2) },
+	{ USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_2) },
+	{ USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2) },
+	{ USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P) },
+	{ USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P) },
+	{}			/* terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* This structure holds all of the local port information */
+
+struct moschip_port {
+	int port_num;		/*Actual port number in the device(1,2,etc) */
+	struct urb *read_urb;	/* read URB for this port */
+	__u8 shadowLCR;		/* last LCR value received */
+	__u8 shadowMCR;		/* last MCR value received */
+	struct usb_serial_port *port;	/* loop back to the owner of this object */
+
+	/* Offsets */
+	__u8 SpRegOffset;
+	__u8 ControlRegOffset;
+	__u8 DcrRegOffset;
+
+	spinlock_t pool_lock;
+	struct urb *write_urb_pool[NUM_URBS];
+	char busy[NUM_URBS];
+	bool read_urb_busy;
+
+	/* For device(s) with LED indicator */
+	bool has_led;
+	struct timer_list led_timer1;	/* Timer for LED on */
+	struct timer_list led_timer2;	/* Timer for LED off */
+	struct urb *led_urb;
+	struct usb_ctrlrequest *led_dr;
+
+	unsigned long flags;
+};
+
+/*
+ * mos7840_set_reg_sync
+ * 	To set the Control register by calling usb_fill_control_urb function
+ *	by passing usb_sndctrlpipe function as parameter.
+ */
+
+static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg,
+				__u16 val)
+{
+	struct usb_device *dev = port->serial->dev;
+	val = val & 0x00ff;
+	dev_dbg(&port->dev, "mos7840_set_reg_sync offset is %x, value %x\n", reg, val);
+
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
+			       MCS_WR_RTYPE, val, reg, NULL, 0,
+			       MOS_WDR_TIMEOUT);
+}
+
+/*
+ * mos7840_get_reg_sync
+ * 	To set the Uart register by calling usb_fill_control_urb function by
+ *	passing usb_rcvctrlpipe function as parameter.
+ */
+
+static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg,
+				__u16 *val)
+{
+	struct usb_device *dev = port->serial->dev;
+	int ret = 0;
+	u8 *buf;
+
+	buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
+			      MCS_RD_RTYPE, 0, reg, buf, VENDOR_READ_LENGTH,
+			      MOS_WDR_TIMEOUT);
+	if (ret < VENDOR_READ_LENGTH) {
+		if (ret >= 0)
+			ret = -EIO;
+		goto out;
+	}
+
+	*val = buf[0];
+	dev_dbg(&port->dev, "%s offset is %x, return val %x\n", __func__, reg, *val);
+out:
+	kfree(buf);
+	return ret;
+}
+
+/*
+ * mos7840_set_uart_reg
+ *	To set the Uart register by calling usb_fill_control_urb function by
+ *	passing usb_sndctrlpipe function as parameter.
+ */
+
+static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
+				__u16 val)
+{
+
+	struct usb_device *dev = port->serial->dev;
+	val = val & 0x00ff;
+	/* For the UART control registers, the application number need
+	   to be Or'ed */
+	if (port->serial->num_ports == 2 && port->port_number != 0)
+		val |= ((__u16)port->port_number + 2) << 8;
+	else
+		val |= ((__u16)port->port_number + 1) << 8;
+	dev_dbg(&port->dev, "%s application number is %x\n", __func__, val);
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
+			       MCS_WR_RTYPE, val, reg, NULL, 0,
+			       MOS_WDR_TIMEOUT);
+
+}
+
+/*
+ * mos7840_get_uart_reg
+ *	To set the Control register by calling usb_fill_control_urb function
+ *	by passing usb_rcvctrlpipe function as parameter.
+ */
+static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
+				__u16 *val)
+{
+	struct usb_device *dev = port->serial->dev;
+	int ret = 0;
+	__u16 Wval;
+	u8 *buf;
+
+	buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	/* Wval  is same as application number */
+	if (port->serial->num_ports == 2 && port->port_number != 0)
+		Wval = ((__u16)port->port_number + 2) << 8;
+	else
+		Wval = ((__u16)port->port_number + 1) << 8;
+	dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval);
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
+			      MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH,
+			      MOS_WDR_TIMEOUT);
+	if (ret < VENDOR_READ_LENGTH) {
+		if (ret >= 0)
+			ret = -EIO;
+		goto out;
+	}
+	*val = buf[0];
+out:
+	kfree(buf);
+	return ret;
+}
+
+static void mos7840_dump_serial_port(struct usb_serial_port *port,
+				     struct moschip_port *mos7840_port)
+{
+
+	dev_dbg(&port->dev, "SpRegOffset is %2x\n", mos7840_port->SpRegOffset);
+	dev_dbg(&port->dev, "ControlRegOffset is %2x\n", mos7840_port->ControlRegOffset);
+	dev_dbg(&port->dev, "DCRRegOffset is %2x\n", mos7840_port->DcrRegOffset);
+
+}
+
+/************************************************************************/
+/************************************************************************/
+/*            U S B  C A L L B A C K   F U N C T I O N S                */
+/*            U S B  C A L L B A C K   F U N C T I O N S                */
+/************************************************************************/
+/************************************************************************/
+
+static void mos7840_set_led_callback(struct urb *urb)
+{
+	switch (urb->status) {
+	case 0:
+		/* Success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* This urb is terminated, clean up */
+		dev_dbg(&urb->dev->dev, "%s - urb shutting down: %d\n",
+			__func__, urb->status);
+		break;
+	default:
+		dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n",
+			__func__, urb->status);
+	}
+}
+
+static void mos7840_set_led_async(struct moschip_port *mcs, __u16 wval,
+				__u16 reg)
+{
+	struct usb_device *dev = mcs->port->serial->dev;
+	struct usb_ctrlrequest *dr = mcs->led_dr;
+
+	dr->bRequestType = MCS_WR_RTYPE;
+	dr->bRequest = MCS_WRREQ;
+	dr->wValue = cpu_to_le16(wval);
+	dr->wIndex = cpu_to_le16(reg);
+	dr->wLength = cpu_to_le16(0);
+
+	usb_fill_control_urb(mcs->led_urb, dev, usb_sndctrlpipe(dev, 0),
+		(unsigned char *)dr, NULL, 0, mos7840_set_led_callback, NULL);
+
+	usb_submit_urb(mcs->led_urb, GFP_ATOMIC);
+}
+
+static void mos7840_set_led_sync(struct usb_serial_port *port, __u16 reg,
+				__u16 val)
+{
+	struct usb_device *dev = port->serial->dev;
+
+	usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, MCS_WR_RTYPE,
+			val, reg, NULL, 0, MOS_WDR_TIMEOUT);
+}
+
+static void mos7840_led_off(struct timer_list *t)
+{
+	struct moschip_port *mcs = from_timer(mcs, t, led_timer1);
+
+	/* Turn off LED */
+	mos7840_set_led_async(mcs, 0x0300, MODEM_CONTROL_REGISTER);
+	mod_timer(&mcs->led_timer2,
+				jiffies + msecs_to_jiffies(LED_OFF_MS));
+}
+
+static void mos7840_led_flag_off(struct timer_list *t)
+{
+	struct moschip_port *mcs = from_timer(mcs, t, led_timer2);
+
+	clear_bit_unlock(MOS7840_FLAG_LED_BUSY, &mcs->flags);
+}
+
+static void mos7840_led_activity(struct usb_serial_port *port)
+{
+	struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+
+	if (test_and_set_bit_lock(MOS7840_FLAG_LED_BUSY, &mos7840_port->flags))
+		return;
+
+	mos7840_set_led_async(mos7840_port, 0x0301, MODEM_CONTROL_REGISTER);
+	mod_timer(&mos7840_port->led_timer1,
+				jiffies + msecs_to_jiffies(LED_ON_MS));
+}
+
+/*****************************************************************************
+ * mos7840_bulk_in_callback
+ *	this is the callback function for when we have received data on the
+ *	bulk in endpoint.
+ *****************************************************************************/
+
+static void mos7840_bulk_in_callback(struct urb *urb)
+{
+	struct moschip_port *mos7840_port = urb->context;
+	struct usb_serial_port *port = mos7840_port->port;
+	int retval;
+	unsigned char *data;
+	int status = urb->status;
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status);
+		mos7840_port->read_urb_busy = false;
+		return;
+	}
+
+	data = urb->transfer_buffer;
+	usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
+
+	if (urb->actual_length) {
+		struct tty_port *tport = &mos7840_port->port->port;
+		tty_insert_flip_string(tport, data, urb->actual_length);
+		tty_flip_buffer_push(tport);
+		port->icount.rx += urb->actual_length;
+		dev_dbg(&port->dev, "icount.rx is %d:\n", port->icount.rx);
+	}
+
+	if (mos7840_port->has_led)
+		mos7840_led_activity(port);
+
+	mos7840_port->read_urb_busy = true;
+	retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
+
+	if (retval) {
+		dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval);
+		mos7840_port->read_urb_busy = false;
+	}
+}
+
+/*****************************************************************************
+ * mos7840_bulk_out_data_callback
+ *	this is the callback function for when we have finished sending
+ *	serial data on the bulk out endpoint.
+ *****************************************************************************/
+
+static void mos7840_bulk_out_data_callback(struct urb *urb)
+{
+	struct moschip_port *mos7840_port = urb->context;
+	struct usb_serial_port *port = mos7840_port->port;
+	int status = urb->status;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mos7840_port->pool_lock, flags);
+	for (i = 0; i < NUM_URBS; i++) {
+		if (urb == mos7840_port->write_urb_pool[i]) {
+			mos7840_port->busy[i] = 0;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
+
+	if (status) {
+		dev_dbg(&port->dev, "nonzero write bulk status received:%d\n", status);
+		return;
+	}
+
+	tty_port_tty_wakeup(&port->port);
+
+}
+
+/************************************************************************/
+/*       D R I V E R  T T Y  I N T E R F A C E  F U N C T I O N S       */
+/************************************************************************/
+
+/*****************************************************************************
+ * mos7840_open
+ *	this function is called by the tty driver when a port is opened
+ *	If successful, we return 0
+ *	Otherwise we return a negative error number.
+ *****************************************************************************/
+
+static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	int response;
+	int j;
+	struct urb *urb;
+	__u16 Data;
+	int status;
+
+	usb_clear_halt(serial->dev, port->write_urb->pipe);
+	usb_clear_halt(serial->dev, port->read_urb->pipe);
+
+	/* Initialising the write urb pool */
+	for (j = 0; j < NUM_URBS; ++j) {
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		mos7840_port->write_urb_pool[j] = urb;
+		if (!urb)
+			continue;
+
+		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
+								GFP_KERNEL);
+		if (!urb->transfer_buffer) {
+			usb_free_urb(urb);
+			mos7840_port->write_urb_pool[j] = NULL;
+			continue;
+		}
+	}
+
+/*****************************************************************************
+ * Initialize MCS7840 -- Write Init values to corresponding Registers
+ *
+ * Register Index
+ * 1 : IER
+ * 2 : FCR
+ * 3 : LCR
+ * 4 : MCR
+ *
+ * 0x08 : SP1/2 Control Reg
+ *****************************************************************************/
+
+	/* NEED to check the following Block */
+
+	Data = 0x0;
+	status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Reading Spreg failed\n");
+		goto err;
+	}
+	Data |= 0x80;
+	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "writing Spreg failed\n");
+		goto err;
+	}
+
+	Data &= ~0x80;
+	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "writing Spreg failed\n");
+		goto err;
+	}
+	/* End of block to be checked */
+
+	Data = 0x0;
+	status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
+									&Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Reading Controlreg failed\n");
+		goto err;
+	}
+	Data |= 0x08;		/* Driver done bit */
+	Data |= 0x20;		/* rx_disable */
+	status = mos7840_set_reg_sync(port,
+				mos7840_port->ControlRegOffset, Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "writing Controlreg failed\n");
+		goto err;
+	}
+	/* do register settings here */
+	/* Set all regs to the device default values. */
+	/***********************************
+	 * First Disable all interrupts.
+	 ***********************************/
+	Data = 0x00;
+	status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "disabling interrupts failed\n");
+		goto err;
+	}
+	/* Set FIFO_CONTROL_REGISTER to the default value */
+	Data = 0x00;
+	status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");
+		goto err;
+	}
+
+	Data = 0xcf;
+	status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");
+		goto err;
+	}
+
+	Data = 0x03;
+	status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
+	mos7840_port->shadowLCR = Data;
+
+	Data = 0x0b;
+	status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+	mos7840_port->shadowMCR = Data;
+
+	Data = 0x00;
+	status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
+	mos7840_port->shadowLCR = Data;
+
+	Data |= SERIAL_LCR_DLAB;	/* data latch enable in LCR 0x80 */
+	status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
+
+	Data = 0x0c;
+	status = mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
+
+	Data = 0x0;
+	status = mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
+
+	Data = 0x00;
+	status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
+
+	Data = Data & ~SERIAL_LCR_DLAB;
+	status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
+	mos7840_port->shadowLCR = Data;
+
+	/* clearing Bulkin and Bulkout Fifo */
+	Data = 0x0;
+	status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
+
+	Data = Data | 0x0c;
+	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
+
+	Data = Data & ~0x0c;
+	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
+	/* Finally enable all interrupts */
+	Data = 0x0c;
+	status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
+
+	/* clearing rx_disable */
+	Data = 0x0;
+	status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
+									&Data);
+	Data = Data & ~0x20;
+	status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
+									Data);
+
+	/* rx_negate */
+	Data = 0x0;
+	status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
+									&Data);
+	Data = Data | 0x10;
+	status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
+									Data);
+
+	dev_dbg(&port->dev, "port number is %d\n", port->port_number);
+	dev_dbg(&port->dev, "minor number is %d\n", port->minor);
+	dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
+	dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress);
+	dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress);
+	dev_dbg(&port->dev, "port's number in the device is %d\n", mos7840_port->port_num);
+	mos7840_port->read_urb = port->read_urb;
+
+	/* set up our bulk in urb */
+	if ((serial->num_ports == 2) && (((__u16)port->port_number % 2) != 0)) {
+		usb_fill_bulk_urb(mos7840_port->read_urb,
+			serial->dev,
+			usb_rcvbulkpipe(serial->dev,
+				(port->bulk_in_endpointAddress) + 2),
+			port->bulk_in_buffer,
+			mos7840_port->read_urb->transfer_buffer_length,
+			mos7840_bulk_in_callback, mos7840_port);
+	} else {
+		usb_fill_bulk_urb(mos7840_port->read_urb,
+			serial->dev,
+			usb_rcvbulkpipe(serial->dev,
+				port->bulk_in_endpointAddress),
+			port->bulk_in_buffer,
+			mos7840_port->read_urb->transfer_buffer_length,
+			mos7840_bulk_in_callback, mos7840_port);
+	}
+
+	dev_dbg(&port->dev, "%s: bulkin endpoint is %d\n", __func__, port->bulk_in_endpointAddress);
+	mos7840_port->read_urb_busy = true;
+	response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
+	if (response) {
+		dev_err(&port->dev, "%s - Error %d submitting control urb\n",
+			__func__, response);
+		mos7840_port->read_urb_busy = false;
+	}
+
+	/* initialize our port settings */
+	/* Must set to enable ints! */
+	mos7840_port->shadowMCR = MCR_MASTER_IE;
+
+	return 0;
+err:
+	for (j = 0; j < NUM_URBS; ++j) {
+		urb = mos7840_port->write_urb_pool[j];
+		if (!urb)
+			continue;
+		kfree(urb->transfer_buffer);
+		usb_free_urb(urb);
+	}
+	return status;
+}
+
+/*****************************************************************************
+ * mos7840_chars_in_buffer
+ *	this function is called by the tty driver when it wants to know how many
+ *	bytes of data we currently have outstanding in the port (data that has
+ *	been written, but hasn't made it out the port yet)
+ *****************************************************************************/
+
+static unsigned int mos7840_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+	int i;
+	unsigned int chars = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mos7840_port->pool_lock, flags);
+	for (i = 0; i < NUM_URBS; ++i) {
+		if (mos7840_port->busy[i]) {
+			struct urb *urb = mos7840_port->write_urb_pool[i];
+			chars += urb->transfer_buffer_length;
+		}
+	}
+	spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
+	dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars);
+	return chars;
+
+}
+
+/*****************************************************************************
+ * mos7840_close
+ *	this function is called by the tty driver when a port is closed
+ *****************************************************************************/
+
+static void mos7840_close(struct usb_serial_port *port)
+{
+	struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+	int j;
+	__u16 Data;
+
+	for (j = 0; j < NUM_URBS; ++j)
+		usb_kill_urb(mos7840_port->write_urb_pool[j]);
+
+	/* Freeing Write URBs */
+	for (j = 0; j < NUM_URBS; ++j) {
+		if (mos7840_port->write_urb_pool[j]) {
+			kfree(mos7840_port->write_urb_pool[j]->transfer_buffer);
+			usb_free_urb(mos7840_port->write_urb_pool[j]);
+		}
+	}
+
+	usb_kill_urb(mos7840_port->read_urb);
+	mos7840_port->read_urb_busy = false;
+
+	Data = 0x0;
+	mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+
+	Data = 0x00;
+	mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
+}
+
+/*****************************************************************************
+ * mos7840_break
+ *	this function sends a break to the port
+ *****************************************************************************/
+static void mos7840_break(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+	unsigned char data;
+
+	if (break_state == -1)
+		data = mos7840_port->shadowLCR | LCR_SET_BREAK;
+	else
+		data = mos7840_port->shadowLCR & ~LCR_SET_BREAK;
+
+	/* FIXME: no locking on shadowLCR anywhere in driver */
+	mos7840_port->shadowLCR = data;
+	dev_dbg(&port->dev, "%s mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR);
+	mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER,
+			     mos7840_port->shadowLCR);
+}
+
+/*****************************************************************************
+ * mos7840_write_room
+ *	this function is called by the tty driver when it wants to know how many
+ *	bytes of data we can accept for a specific port.
+ *****************************************************************************/
+
+static unsigned int mos7840_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+	int i;
+	unsigned int room = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mos7840_port->pool_lock, flags);
+	for (i = 0; i < NUM_URBS; ++i) {
+		if (!mos7840_port->busy[i])
+			room += URB_TRANSFER_BUFFER_SIZE;
+	}
+	spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
+
+	room = (room == 0) ? 0 : room - URB_TRANSFER_BUFFER_SIZE + 1;
+	dev_dbg(&mos7840_port->port->dev, "%s - returns %u\n", __func__, room);
+	return room;
+
+}
+
+/*****************************************************************************
+ * mos7840_write
+ *	this function is called by the tty driver when data should be written to
+ *	the port.
+ *	If successful, we return the number of bytes written, otherwise we
+ *      return a negative error number.
+ *****************************************************************************/
+
+static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
+			 const unsigned char *data, int count)
+{
+	struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	int status;
+	int i;
+	int bytes_sent = 0;
+	int transfer_size;
+	unsigned long flags;
+	struct urb *urb;
+	/* __u16 Data; */
+	const unsigned char *current_position = data;
+
+	/* try to find a free urb in the list */
+	urb = NULL;
+
+	spin_lock_irqsave(&mos7840_port->pool_lock, flags);
+	for (i = 0; i < NUM_URBS; ++i) {
+		if (!mos7840_port->busy[i]) {
+			mos7840_port->busy[i] = 1;
+			urb = mos7840_port->write_urb_pool[i];
+			dev_dbg(&port->dev, "URB:%d\n", i);
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
+
+	if (urb == NULL) {
+		dev_dbg(&port->dev, "%s - no more free urbs\n", __func__);
+		goto exit;
+	}
+
+	if (urb->transfer_buffer == NULL) {
+		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
+					       GFP_ATOMIC);
+		if (!urb->transfer_buffer) {
+			bytes_sent = -ENOMEM;
+			goto exit;
+		}
+	}
+	transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
+
+	memcpy(urb->transfer_buffer, current_position, transfer_size);
+
+	/* fill urb with data and submit  */
+	if ((serial->num_ports == 2) && (((__u16)port->port_number % 2) != 0)) {
+		usb_fill_bulk_urb(urb,
+			serial->dev,
+			usb_sndbulkpipe(serial->dev,
+				(port->bulk_out_endpointAddress) + 2),
+			urb->transfer_buffer,
+			transfer_size,
+			mos7840_bulk_out_data_callback, mos7840_port);
+	} else {
+		usb_fill_bulk_urb(urb,
+			serial->dev,
+			usb_sndbulkpipe(serial->dev,
+				port->bulk_out_endpointAddress),
+			urb->transfer_buffer,
+			transfer_size,
+			mos7840_bulk_out_data_callback, mos7840_port);
+	}
+
+	dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress);
+
+	if (mos7840_port->has_led)
+		mos7840_led_activity(port);
+
+	/* send it down the pipe */
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+
+	if (status) {
+		mos7840_port->busy[i] = 0;
+		dev_err_console(port, "%s - usb_submit_urb(write bulk) failed "
+			"with status = %d\n", __func__, status);
+		bytes_sent = status;
+		goto exit;
+	}
+	bytes_sent = transfer_size;
+	port->icount.tx += transfer_size;
+	dev_dbg(&port->dev, "icount.tx is %d:\n", port->icount.tx);
+exit:
+	return bytes_sent;
+
+}
+
+/*****************************************************************************
+ * mos7840_throttle
+ *	this function is called by the tty driver when it wants to stop the data
+ *	being read from the port.
+ *****************************************************************************/
+
+static void mos7840_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+	int status;
+
+	/* if we are implementing XON/XOFF, send the stop character */
+	if (I_IXOFF(tty)) {
+		unsigned char stop_char = STOP_CHAR(tty);
+		status = mos7840_write(tty, port, &stop_char, 1);
+		if (status <= 0)
+			return;
+	}
+	/* if we are implementing RTS/CTS, toggle that line */
+	if (C_CRTSCTS(tty)) {
+		mos7840_port->shadowMCR &= ~MCR_RTS;
+		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
+					 mos7840_port->shadowMCR);
+		if (status < 0)
+			return;
+	}
+}
+
+/*****************************************************************************
+ * mos7840_unthrottle
+ *	this function is called by the tty driver when it wants to resume
+ *	the data being read from the port (called after mos7840_throttle is
+ *	called)
+ *****************************************************************************/
+static void mos7840_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+	int status;
+
+	/* if we are implementing XON/XOFF, send the start character */
+	if (I_IXOFF(tty)) {
+		unsigned char start_char = START_CHAR(tty);
+		status = mos7840_write(tty, port, &start_char, 1);
+		if (status <= 0)
+			return;
+	}
+
+	/* if we are implementing RTS/CTS, toggle that line */
+	if (C_CRTSCTS(tty)) {
+		mos7840_port->shadowMCR |= MCR_RTS;
+		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
+					 mos7840_port->shadowMCR);
+		if (status < 0)
+			return;
+	}
+}
+
+static int mos7840_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned int result;
+	__u16 msr;
+	__u16 mcr;
+	int status;
+
+	status = mos7840_get_uart_reg(port, MODEM_STATUS_REGISTER, &msr);
+	if (status < 0)
+		return -EIO;
+	status = mos7840_get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr);
+	if (status < 0)
+		return -EIO;
+	result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
+	    | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
+	    | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0)
+	    | ((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0)
+	    | ((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0)
+	    | ((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0)
+	    | ((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0);
+
+	dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);
+
+	return result;
+}
+
+static int mos7840_tiocmset(struct tty_struct *tty,
+			    unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+	unsigned int mcr;
+	int status;
+
+	/* FIXME: What locks the port registers ? */
+	mcr = mos7840_port->shadowMCR;
+	if (clear & TIOCM_RTS)
+		mcr &= ~MCR_RTS;
+	if (clear & TIOCM_DTR)
+		mcr &= ~MCR_DTR;
+	if (clear & TIOCM_LOOP)
+		mcr &= ~MCR_LOOPBACK;
+
+	if (set & TIOCM_RTS)
+		mcr |= MCR_RTS;
+	if (set & TIOCM_DTR)
+		mcr |= MCR_DTR;
+	if (set & TIOCM_LOOP)
+		mcr |= MCR_LOOPBACK;
+
+	mos7840_port->shadowMCR = mcr;
+
+	status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
+	if (status < 0) {
+		dev_dbg(&port->dev, "setting MODEM_CONTROL_REGISTER Failed\n");
+		return status;
+	}
+
+	return 0;
+}
+
+/*****************************************************************************
+ * mos7840_calc_baud_rate_divisor
+ *	this function calculates the proper baud rate divisor for the specified
+ *	baud rate.
+ *****************************************************************************/
+static int mos7840_calc_baud_rate_divisor(struct usb_serial_port *port,
+					  int baudRate, int *divisor,
+					  __u16 *clk_sel_val)
+{
+	dev_dbg(&port->dev, "%s - %d\n", __func__, baudRate);
+
+	if (baudRate <= 115200) {
+		*divisor = 115200 / baudRate;
+		*clk_sel_val = 0x0;
+	}
+	if ((baudRate > 115200) && (baudRate <= 230400)) {
+		*divisor = 230400 / baudRate;
+		*clk_sel_val = 0x10;
+	} else if ((baudRate > 230400) && (baudRate <= 403200)) {
+		*divisor = 403200 / baudRate;
+		*clk_sel_val = 0x20;
+	} else if ((baudRate > 403200) && (baudRate <= 460800)) {
+		*divisor = 460800 / baudRate;
+		*clk_sel_val = 0x30;
+	} else if ((baudRate > 460800) && (baudRate <= 806400)) {
+		*divisor = 806400 / baudRate;
+		*clk_sel_val = 0x40;
+	} else if ((baudRate > 806400) && (baudRate <= 921600)) {
+		*divisor = 921600 / baudRate;
+		*clk_sel_val = 0x50;
+	} else if ((baudRate > 921600) && (baudRate <= 1572864)) {
+		*divisor = 1572864 / baudRate;
+		*clk_sel_val = 0x60;
+	} else if ((baudRate > 1572864) && (baudRate <= 3145728)) {
+		*divisor = 3145728 / baudRate;
+		*clk_sel_val = 0x70;
+	}
+	return 0;
+}
+
+/*****************************************************************************
+ * mos7840_send_cmd_write_baud_rate
+ *	this function sends the proper command to change the baud rate of the
+ *	specified port.
+ *****************************************************************************/
+
+static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
+					    int baudRate)
+{
+	struct usb_serial_port *port = mos7840_port->port;
+	int divisor = 0;
+	int status;
+	__u16 Data;
+	__u16 clk_sel_val;
+
+	dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudRate);
+	/* reset clk_uart_sel in spregOffset */
+	if (baudRate > 115200) {
+#ifdef HW_flow_control
+		/* NOTE: need to see the pther register to modify */
+		/* setting h/w flow control bit to 1 */
+		Data = 0x2b;
+		mos7840_port->shadowMCR = Data;
+		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
+									Data);
+		if (status < 0) {
+			dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");
+			return -1;
+		}
+#endif
+
+	} else {
+#ifdef HW_flow_control
+		/* setting h/w flow control bit to 0 */
+		Data = 0xb;
+		mos7840_port->shadowMCR = Data;
+		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
+									Data);
+		if (status < 0) {
+			dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");
+			return -1;
+		}
+#endif
+
+	}
+
+	if (1) {		/* baudRate <= 115200) */
+		clk_sel_val = 0x0;
+		Data = 0x0;
+		status = mos7840_calc_baud_rate_divisor(port, baudRate, &divisor,
+						   &clk_sel_val);
+		status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset,
+								 &Data);
+		if (status < 0) {
+			dev_dbg(&port->dev, "reading spreg failed in set_serial_baud\n");
+			return -1;
+		}
+		Data = (Data & 0x8f) | clk_sel_val;
+		status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset,
+								Data);
+		if (status < 0) {
+			dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");
+			return -1;
+		}
+		/* Calculate the Divisor */
+
+		if (status) {
+			dev_err(&port->dev, "%s - bad baud rate\n", __func__);
+			return status;
+		}
+		/* Enable access to divisor latch */
+		Data = mos7840_port->shadowLCR | SERIAL_LCR_DLAB;
+		mos7840_port->shadowLCR = Data;
+		mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
+
+		/* Write the divisor */
+		Data = (unsigned char)(divisor & 0xff);
+		dev_dbg(&port->dev, "set_serial_baud Value to write DLL is %x\n", Data);
+		mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
+
+		Data = (unsigned char)((divisor & 0xff00) >> 8);
+		dev_dbg(&port->dev, "set_serial_baud Value to write DLM is %x\n", Data);
+		mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
+
+		/* Disable access to divisor latch */
+		Data = mos7840_port->shadowLCR & ~SERIAL_LCR_DLAB;
+		mos7840_port->shadowLCR = Data;
+		mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
+
+	}
+	return status;
+}
+
+/*****************************************************************************
+ * mos7840_change_port_settings
+ *	This routine is called to set the UART on the device to match
+ *      the specified new settings.
+ *****************************************************************************/
+
+static void mos7840_change_port_settings(struct tty_struct *tty,
+					 struct moschip_port *mos7840_port,
+					 const struct ktermios *old_termios)
+{
+	struct usb_serial_port *port = mos7840_port->port;
+	int baud;
+	unsigned cflag;
+	__u8 lData;
+	__u8 lParity;
+	__u8 lStop;
+	int status;
+	__u16 Data;
+
+	lData = LCR_BITS_8;
+	lStop = LCR_STOP_1;
+	lParity = LCR_PAR_NONE;
+
+	cflag = tty->termios.c_cflag;
+
+	/* Change the number of bits */
+	switch (cflag & CSIZE) {
+	case CS5:
+		lData = LCR_BITS_5;
+		break;
+
+	case CS6:
+		lData = LCR_BITS_6;
+		break;
+
+	case CS7:
+		lData = LCR_BITS_7;
+		break;
+
+	default:
+	case CS8:
+		lData = LCR_BITS_8;
+		break;
+	}
+
+	/* Change the Parity bit */
+	if (cflag & PARENB) {
+		if (cflag & PARODD) {
+			lParity = LCR_PAR_ODD;
+			dev_dbg(&port->dev, "%s - parity = odd\n", __func__);
+		} else {
+			lParity = LCR_PAR_EVEN;
+			dev_dbg(&port->dev, "%s - parity = even\n", __func__);
+		}
+
+	} else {
+		dev_dbg(&port->dev, "%s - parity = none\n", __func__);
+	}
+
+	if (cflag & CMSPAR)
+		lParity = lParity | 0x20;
+
+	/* Change the Stop bit */
+	if (cflag & CSTOPB) {
+		lStop = LCR_STOP_2;
+		dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__);
+	} else {
+		lStop = LCR_STOP_1;
+		dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__);
+	}
+
+	/* Update the LCR with the correct value */
+	mos7840_port->shadowLCR &=
+	    ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
+	mos7840_port->shadowLCR |= (lData | lParity | lStop);
+
+	dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is %x\n", __func__,
+		mos7840_port->shadowLCR);
+	/* Disable Interrupts */
+	Data = 0x00;
+	mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
+
+	Data = 0x00;
+	mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
+
+	Data = 0xcf;
+	mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
+
+	/* Send the updated LCR value to the mos7840 */
+	Data = mos7840_port->shadowLCR;
+
+	mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
+
+	Data = 0x00b;
+	mos7840_port->shadowMCR = Data;
+	mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+	Data = 0x00b;
+	mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+
+	/* set up the MCR register and send it to the mos7840 */
+
+	mos7840_port->shadowMCR = MCR_MASTER_IE;
+	if (cflag & CBAUD)
+		mos7840_port->shadowMCR |= (MCR_DTR | MCR_RTS);
+
+	if (cflag & CRTSCTS)
+		mos7840_port->shadowMCR |= (MCR_XON_ANY);
+	else
+		mos7840_port->shadowMCR &= ~(MCR_XON_ANY);
+
+	Data = mos7840_port->shadowMCR;
+	mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+
+	/* Determine divisor based on baud rate */
+	baud = tty_get_baud_rate(tty);
+
+	if (!baud) {
+		/* pick a default, any default... */
+		dev_dbg(&port->dev, "%s", "Picked default baud...\n");
+		baud = 9600;
+	}
+
+	dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud);
+	status = mos7840_send_cmd_write_baud_rate(mos7840_port, baud);
+
+	/* Enable Interrupts */
+	Data = 0x0c;
+	mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
+
+	if (!mos7840_port->read_urb_busy) {
+		mos7840_port->read_urb_busy = true;
+		status = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
+		if (status) {
+			dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n",
+			    status);
+			mos7840_port->read_urb_busy = false;
+		}
+	}
+	dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is End %x\n", __func__,
+		mos7840_port->shadowLCR);
+}
+
+/*****************************************************************************
+ * mos7840_set_termios
+ *	this function is called by the tty driver when it wants to change
+ *	the termios structure
+ *****************************************************************************/
+
+static void mos7840_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
+				const struct ktermios *old_termios)
+{
+	struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+	int status;
+
+	/* change the port settings to the new ones specified */
+
+	mos7840_change_port_settings(tty, mos7840_port, old_termios);
+
+	if (!mos7840_port->read_urb_busy) {
+		mos7840_port->read_urb_busy = true;
+		status = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
+		if (status) {
+			dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n",
+			    status);
+			mos7840_port->read_urb_busy = false;
+		}
+	}
+}
+
+/*****************************************************************************
+ * mos7840_get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * 	    is emptied.  On bus types like RS485, the transmitter must
+ * 	    release the bus after transmitting. This must be done when
+ * 	    the transmit shift register is empty, not be done when the
+ * 	    transmit holding register is empty.  This functionality
+ * 	    allows an RS485 driver to be written in user space.
+ *****************************************************************************/
+
+static int mos7840_get_lsr_info(struct tty_struct *tty,
+				unsigned int __user *value)
+{
+	int count;
+	unsigned int result = 0;
+
+	count = mos7840_chars_in_buffer(tty);
+	if (count == 0)
+		result = TIOCSER_TEMT;
+
+	if (copy_to_user(value, &result, sizeof(int)))
+		return -EFAULT;
+	return 0;
+}
+
+/*****************************************************************************
+ * SerialIoctl
+ *	this function handles any ioctl calls to the driver
+ *****************************************************************************/
+
+static int mos7840_ioctl(struct tty_struct *tty,
+			 unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	void __user *argp = (void __user *)arg;
+
+	switch (cmd) {
+		/* return number of bytes available */
+
+	case TIOCSERGETLSR:
+		dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__);
+		return mos7840_get_lsr_info(tty, argp);
+
+	default:
+		break;
+	}
+	return -ENOIOCTLCMD;
+}
+
+/*
+ * Check if GPO (pin 42) is connected to GPI (pin 33) as recommended by ASIX
+ * for MCS7810 by bit-banging a 16-bit word.
+ *
+ * Note that GPO is really RTS of the third port so this will toggle RTS of
+ * port two or three on two- and four-port devices.
+ */
+static int mos7810_check(struct usb_serial *serial)
+{
+	int i, pass_count = 0;
+	u8 *buf;
+	__u16 data = 0, mcr_data = 0;
+	__u16 test_pattern = 0x55AA;
+	int res;
+
+	buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (!buf)
+		return 0;	/* failed to identify 7810 */
+
+	/* Store MCR setting */
+	res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+		MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER,
+		buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+	if (res == VENDOR_READ_LENGTH)
+		mcr_data = *buf;
+
+	for (i = 0; i < 16; i++) {
+		/* Send the 1-bit test pattern out to MCS7810 test pin */
+		usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			MCS_WRREQ, MCS_WR_RTYPE,
+			(0x0300 | (((test_pattern >> i) & 0x0001) << 1)),
+			MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT);
+
+		/* Read the test pattern back */
+		res = usb_control_msg(serial->dev,
+				usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ,
+				MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+				VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		if (res == VENDOR_READ_LENGTH)
+			data = *buf;
+
+		/* If this is a MCS7810 device, both test patterns must match */
+		if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001)
+			break;
+
+		pass_count++;
+	}
+
+	/* Restore MCR setting */
+	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCS_WRREQ,
+		MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL,
+		0, MOS_WDR_TIMEOUT);
+
+	kfree(buf);
+
+	if (pass_count == 16)
+		return 1;
+
+	return 0;
+}
+
+static int mos7840_probe(struct usb_serial *serial,
+				const struct usb_device_id *id)
+{
+	unsigned long device_flags = id->driver_info;
+	u8 *buf;
+
+	/* Skip device-type detection if we already have device flags. */
+	if (device_flags)
+		goto out;
+
+	buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+			MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+			VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+
+	/* For a MCS7840 device GPIO0 must be set to 1 */
+	if (buf[0] & 0x01)
+		device_flags = MCS_PORTS(4);
+	else if (mos7810_check(serial))
+		device_flags = MCS_PORTS(1) | MCS_LED;
+	else
+		device_flags = MCS_PORTS(2);
+
+	kfree(buf);
+out:
+	usb_set_serial_data(serial, (void *)device_flags);
+
+	return 0;
+}
+
+static int mos7840_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds)
+{
+	unsigned long device_flags = (unsigned long)usb_get_serial_data(serial);
+	int num_ports = MCS_PORTS(device_flags);
+
+	if (num_ports == 0 || num_ports > 4)
+		return -ENODEV;
+
+	if (epds->num_bulk_in < num_ports || epds->num_bulk_out < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return num_ports;
+}
+
+static int mos7840_attach(struct usb_serial *serial)
+{
+	struct device *dev = &serial->interface->dev;
+	int status;
+	u16 val;
+
+	/* Zero Length flag enable */
+	val = 0x0f;
+	status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, val);
+	if (status < 0)
+		dev_dbg(dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
+	else
+		dev_dbg(dev, "ZLP_REG5 Writing success status%d\n", status);
+
+	return status;
+}
+
+static int mos7840_port_probe(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	unsigned long device_flags = (unsigned long)usb_get_serial_data(serial);
+	struct moschip_port *mos7840_port;
+	int status;
+	int pnum;
+	__u16 Data;
+
+	/* we set up the pointers to the endpoints in the mos7840_open *
+	 * function, as the structures aren't created yet.             */
+
+	pnum = port->port_number;
+
+	dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum);
+	mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
+	if (!mos7840_port)
+		return -ENOMEM;
+
+	/* Initialize all port interrupt end point to port 0 int
+	 * endpoint. Our device has only one interrupt end point
+	 * common to all port */
+
+	mos7840_port->port = port;
+	spin_lock_init(&mos7840_port->pool_lock);
+
+	/* minor is not initialised until later by
+	 * usb-serial.c:get_free_serial() and cannot therefore be used
+	 * to index device instances */
+	mos7840_port->port_num = pnum + 1;
+	dev_dbg(&port->dev, "port->minor = %d\n", port->minor);
+	dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);
+
+	if (mos7840_port->port_num == 1) {
+		mos7840_port->SpRegOffset = 0x0;
+		mos7840_port->ControlRegOffset = 0x1;
+		mos7840_port->DcrRegOffset = 0x4;
+	} else {
+		u8 phy_num = mos7840_port->port_num;
+
+		/* Port 2 in the 2-port case uses registers of port 3 */
+		if (serial->num_ports == 2)
+			phy_num = 3;
+
+		mos7840_port->SpRegOffset = 0x8 + 2 * (phy_num - 2);
+		mos7840_port->ControlRegOffset = 0x9 + 2 * (phy_num - 2);
+		mos7840_port->DcrRegOffset = 0x16 + 3 * (phy_num - 2);
+	}
+	mos7840_dump_serial_port(port, mos7840_port);
+	usb_set_serial_port_data(port, mos7840_port);
+
+	/* enable rx_disable bit in control register */
+	status = mos7840_get_reg_sync(port,
+			mos7840_port->ControlRegOffset, &Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status);
+		goto error;
+	} else
+		dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
+	Data |= 0x08;	/* setting driver done bit */
+	Data |= 0x04;	/* sp1_bit to have cts change reflect in
+			   modem status reg */
+
+	/* Data |= 0x20; //rx_disable bit */
+	status = mos7840_set_reg_sync(port,
+			mos7840_port->ControlRegOffset, Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
+		goto error;
+	} else
+		dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
+
+	/* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
+	   and 0x24 in DCR3 */
+	Data = 0x01;
+	status = mos7840_set_reg_sync(port,
+			(__u16) (mos7840_port->DcrRegOffset + 0), Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status);
+		goto error;
+	} else
+		dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status);
+
+	Data = 0x05;
+	status = mos7840_set_reg_sync(port,
+			(__u16) (mos7840_port->DcrRegOffset + 1), Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status);
+		goto error;
+	} else
+		dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status);
+
+	Data = 0x24;
+	status = mos7840_set_reg_sync(port,
+			(__u16) (mos7840_port->DcrRegOffset + 2), Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status);
+		goto error;
+	} else
+		dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status);
+
+	/* write values in clkstart0x0 and clkmulti 0x20 */
+	Data = 0x0;
+	status = mos7840_set_reg_sync(port, CLK_START_VALUE_REGISTER, Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
+		goto error;
+	} else
+		dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
+
+	Data = 0x20;
+	status = mos7840_set_reg_sync(port, CLK_MULTI_REGISTER, Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);
+		goto error;
+	} else
+		dev_dbg(&port->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status);
+
+	/* write value 0x0 to scratchpad register */
+	Data = 0x00;
+	status = mos7840_set_uart_reg(port, SCRATCH_PAD_REGISTER, Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
+		goto error;
+	} else
+		dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
+
+	/* Zero Length flag register */
+	if ((mos7840_port->port_num != 1) && (serial->num_ports == 2)) {
+		Data = 0xff;
+		status = mos7840_set_reg_sync(port,
+				(__u16) (ZLP_REG1 +
+					((__u16)mos7840_port->port_num)), Data);
+		dev_dbg(&port->dev, "ZLIP offset %x\n",
+				(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num)));
+		if (status < 0) {
+			dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status);
+			goto error;
+		} else
+			dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status);
+	} else {
+		Data = 0xff;
+		status = mos7840_set_reg_sync(port,
+				(__u16) (ZLP_REG1 +
+					((__u16)mos7840_port->port_num) - 0x1), Data);
+		dev_dbg(&port->dev, "ZLIP offset %x\n",
+				(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1));
+		if (status < 0) {
+			dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status);
+			goto error;
+		} else
+			dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status);
+
+	}
+
+	mos7840_port->has_led = device_flags & MCS_LED;
+
+	/* Initialize LED timers */
+	if (mos7840_port->has_led) {
+		mos7840_port->led_urb = usb_alloc_urb(0, GFP_KERNEL);
+		mos7840_port->led_dr = kmalloc(sizeof(*mos7840_port->led_dr),
+								GFP_KERNEL);
+		if (!mos7840_port->led_urb || !mos7840_port->led_dr) {
+			status = -ENOMEM;
+			goto error;
+		}
+
+		timer_setup(&mos7840_port->led_timer1, mos7840_led_off, 0);
+		mos7840_port->led_timer1.expires =
+			jiffies + msecs_to_jiffies(LED_ON_MS);
+		timer_setup(&mos7840_port->led_timer2, mos7840_led_flag_off,
+			    0);
+		mos7840_port->led_timer2.expires =
+			jiffies + msecs_to_jiffies(LED_OFF_MS);
+
+		/* Turn off LED */
+		mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
+	}
+
+	return 0;
+error:
+	kfree(mos7840_port->led_dr);
+	usb_free_urb(mos7840_port->led_urb);
+	kfree(mos7840_port);
+
+	return status;
+}
+
+static void mos7840_port_remove(struct usb_serial_port *port)
+{
+	struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+
+	if (mos7840_port->has_led) {
+		/* Turn off LED */
+		mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
+
+		del_timer_sync(&mos7840_port->led_timer1);
+		del_timer_sync(&mos7840_port->led_timer2);
+
+		usb_kill_urb(mos7840_port->led_urb);
+		usb_free_urb(mos7840_port->led_urb);
+		kfree(mos7840_port->led_dr);
+	}
+
+	kfree(mos7840_port);
+}
+
+static struct usb_serial_driver moschip7840_4port_device = {
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .name = "mos7840",
+		   },
+	.description = DRIVER_DESC,
+	.id_table = id_table,
+	.num_interrupt_in = 1,
+	.open = mos7840_open,
+	.close = mos7840_close,
+	.write = mos7840_write,
+	.write_room = mos7840_write_room,
+	.chars_in_buffer = mos7840_chars_in_buffer,
+	.throttle = mos7840_throttle,
+	.unthrottle = mos7840_unthrottle,
+	.calc_num_ports = mos7840_calc_num_ports,
+	.probe = mos7840_probe,
+	.attach = mos7840_attach,
+	.ioctl = mos7840_ioctl,
+	.set_termios = mos7840_set_termios,
+	.break_ctl = mos7840_break,
+	.tiocmget = mos7840_tiocmget,
+	.tiocmset = mos7840_tiocmset,
+	.get_icount = usb_serial_generic_get_icount,
+	.port_probe = mos7840_port_probe,
+	.port_remove = mos7840_port_remove,
+	.read_bulk_callback = mos7840_bulk_in_callback,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&moschip7840_4port_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/mxuport.c b/drivers/usb/serial/mxuport.c
new file mode 100644
index 000000000..faa0eedfe
--- /dev/null
+++ b/drivers/usb/serial/mxuport.c
@@ -0,0 +1,1318 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *	mxuport.c - MOXA UPort series driver
+ *
+ *	Copyright (c) 2006 Moxa Technologies Co., Ltd.
+ *	Copyright (c) 2013 Andrew Lunn <andrew@lunn.ch>
+ *
+ *	Supports the following Moxa USB to serial converters:
+ *	 2 ports : UPort 1250, UPort 1250I
+ *	 4 ports : UPort 1410, UPort 1450, UPort 1450I
+ *	 8 ports : UPort 1610-8, UPort 1650-8
+ *	16 ports : UPort 1610-16, UPort 1650-16
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/jiffies.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <asm/unaligned.h>
+
+/* Definitions for the vendor ID and device ID */
+#define MX_USBSERIAL_VID	0x110A
+#define MX_UPORT1250_PID	0x1250
+#define MX_UPORT1251_PID	0x1251
+#define MX_UPORT1410_PID	0x1410
+#define MX_UPORT1450_PID	0x1450
+#define MX_UPORT1451_PID	0x1451
+#define MX_UPORT1618_PID	0x1618
+#define MX_UPORT1658_PID	0x1658
+#define MX_UPORT1613_PID	0x1613
+#define MX_UPORT1653_PID	0x1653
+
+/* Definitions for USB info */
+#define HEADER_SIZE		4
+#define EVENT_LENGTH		8
+#define DOWN_BLOCK_SIZE		64
+
+/* Definitions for firmware info */
+#define VER_ADDR_1		0x20
+#define VER_ADDR_2		0x24
+#define VER_ADDR_3		0x28
+
+/* Definitions for USB vendor request */
+#define RQ_VENDOR_NONE			0x00
+#define RQ_VENDOR_SET_BAUD		0x01 /* Set baud rate */
+#define RQ_VENDOR_SET_LINE		0x02 /* Set line status */
+#define RQ_VENDOR_SET_CHARS		0x03 /* Set Xon/Xoff chars */
+#define RQ_VENDOR_SET_RTS		0x04 /* Set RTS */
+#define RQ_VENDOR_SET_DTR		0x05 /* Set DTR */
+#define RQ_VENDOR_SET_XONXOFF		0x06 /* Set auto Xon/Xoff */
+#define RQ_VENDOR_SET_RX_HOST_EN	0x07 /* Set RX host enable */
+#define RQ_VENDOR_SET_OPEN		0x08 /* Set open/close port */
+#define RQ_VENDOR_PURGE			0x09 /* Purge Rx/Tx buffer */
+#define RQ_VENDOR_SET_MCR		0x0A /* Set MCR register */
+#define RQ_VENDOR_SET_BREAK		0x0B /* Set Break signal */
+
+#define RQ_VENDOR_START_FW_DOWN		0x0C /* Start firmware download */
+#define RQ_VENDOR_STOP_FW_DOWN		0x0D /* Stop firmware download */
+#define RQ_VENDOR_QUERY_FW_READY	0x0E /* Query if new firmware ready */
+
+#define RQ_VENDOR_SET_FIFO_DISABLE	0x0F /* Set fifo disable */
+#define RQ_VENDOR_SET_INTERFACE		0x10 /* Set interface */
+#define RQ_VENDOR_SET_HIGH_PERFOR	0x11 /* Set hi-performance */
+
+#define RQ_VENDOR_ERASE_BLOCK		0x12 /* Erase flash block */
+#define RQ_VENDOR_WRITE_PAGE		0x13 /* Write flash page */
+#define RQ_VENDOR_PREPARE_WRITE		0x14 /* Prepare write flash */
+#define RQ_VENDOR_CONFIRM_WRITE		0x15 /* Confirm write flash */
+#define RQ_VENDOR_LOCATE		0x16 /* Locate the device */
+
+#define RQ_VENDOR_START_ROM_DOWN	0x17 /* Start firmware download */
+#define RQ_VENDOR_ROM_DATA		0x18 /* Rom file data */
+#define RQ_VENDOR_STOP_ROM_DOWN		0x19 /* Stop firmware download */
+#define RQ_VENDOR_FW_DATA		0x20 /* Firmware data */
+
+#define RQ_VENDOR_RESET_DEVICE		0x23 /* Try to reset the device */
+#define RQ_VENDOR_QUERY_FW_CONFIG	0x24
+
+#define RQ_VENDOR_GET_VERSION		0x81 /* Get firmware version */
+#define RQ_VENDOR_GET_PAGE		0x82 /* Read flash page */
+#define RQ_VENDOR_GET_ROM_PROC		0x83 /* Get ROM process state */
+
+#define RQ_VENDOR_GET_INQUEUE		0x84 /* Data in input buffer */
+#define RQ_VENDOR_GET_OUTQUEUE		0x85 /* Data in output buffer */
+
+#define RQ_VENDOR_GET_MSR		0x86 /* Get modem status register */
+
+/* Definitions for UPort event type */
+#define UPORT_EVENT_NONE		0 /* None */
+#define UPORT_EVENT_TXBUF_THRESHOLD	1 /* Tx buffer threshold */
+#define UPORT_EVENT_SEND_NEXT		2 /* Send next */
+#define UPORT_EVENT_MSR			3 /* Modem status */
+#define UPORT_EVENT_LSR			4 /* Line status */
+#define UPORT_EVENT_MCR			5 /* Modem control */
+
+/* Definitions for serial event type */
+#define SERIAL_EV_CTS			0x0008	/* CTS changed state */
+#define SERIAL_EV_DSR			0x0010	/* DSR changed state */
+#define SERIAL_EV_RLSD			0x0020	/* RLSD changed state */
+
+/* Definitions for modem control event type */
+#define SERIAL_EV_XOFF			0x40	/* XOFF received */
+
+/* Definitions for line control of communication */
+#define MX_WORDLENGTH_5			5
+#define MX_WORDLENGTH_6			6
+#define MX_WORDLENGTH_7			7
+#define MX_WORDLENGTH_8			8
+
+#define MX_PARITY_NONE			0
+#define MX_PARITY_ODD			1
+#define MX_PARITY_EVEN			2
+#define MX_PARITY_MARK			3
+#define MX_PARITY_SPACE			4
+
+#define MX_STOP_BITS_1			0
+#define MX_STOP_BITS_1_5		1
+#define MX_STOP_BITS_2			2
+
+#define MX_RTS_DISABLE			0x0
+#define MX_RTS_ENABLE			0x1
+#define MX_RTS_HW			0x2
+#define MX_RTS_NO_CHANGE		0x3 /* Flag, not valid register value*/
+
+#define MX_INT_RS232			0
+#define MX_INT_2W_RS485			1
+#define MX_INT_RS422			2
+#define MX_INT_4W_RS485			3
+
+/* Definitions for holding reason */
+#define MX_WAIT_FOR_CTS			0x0001
+#define MX_WAIT_FOR_DSR			0x0002
+#define MX_WAIT_FOR_DCD			0x0004
+#define MX_WAIT_FOR_XON			0x0008
+#define MX_WAIT_FOR_START_TX		0x0010
+#define MX_WAIT_FOR_UNTHROTTLE		0x0020
+#define MX_WAIT_FOR_LOW_WATER		0x0040
+#define MX_WAIT_FOR_SEND_NEXT		0x0080
+
+#define MX_UPORT_2_PORT			BIT(0)
+#define MX_UPORT_4_PORT			BIT(1)
+#define MX_UPORT_8_PORT			BIT(2)
+#define MX_UPORT_16_PORT		BIT(3)
+
+/* This structure holds all of the local port information */
+struct mxuport_port {
+	u8 mcr_state;		/* Last MCR state */
+	u8 msr_state;		/* Last MSR state */
+	struct mutex mutex;	/* Protects mcr_state */
+	spinlock_t spinlock;	/* Protects msr_state */
+};
+
+/* Table of devices that work with this driver */
+static const struct usb_device_id mxuport_idtable[] = {
+	{ USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1250_PID),
+	  .driver_info = MX_UPORT_2_PORT },
+	{ USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1251_PID),
+	  .driver_info = MX_UPORT_2_PORT },
+	{ USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1410_PID),
+	  .driver_info = MX_UPORT_4_PORT },
+	{ USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1450_PID),
+	  .driver_info = MX_UPORT_4_PORT },
+	{ USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1451_PID),
+	  .driver_info = MX_UPORT_4_PORT },
+	{ USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1618_PID),
+	  .driver_info = MX_UPORT_8_PORT },
+	{ USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1658_PID),
+	  .driver_info = MX_UPORT_8_PORT },
+	{ USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1613_PID),
+	  .driver_info = MX_UPORT_16_PORT },
+	{ USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1653_PID),
+	  .driver_info = MX_UPORT_16_PORT },
+	{}			/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, mxuport_idtable);
+
+/*
+ * Add a four byte header containing the port number and the number of
+ * bytes of data in the message. Return the number of bytes in the
+ * buffer.
+ */
+static int mxuport_prepare_write_buffer(struct usb_serial_port *port,
+					void *dest, size_t size)
+{
+	u8 *buf = dest;
+	int count;
+
+	count = kfifo_out_locked(&port->write_fifo, buf + HEADER_SIZE,
+				 size - HEADER_SIZE,
+				 &port->lock);
+
+	put_unaligned_be16(port->port_number, buf);
+	put_unaligned_be16(count, buf + 2);
+
+	dev_dbg(&port->dev, "%s - size %zd count %d\n", __func__,
+		size, count);
+
+	return count + HEADER_SIZE;
+}
+
+/* Read the given buffer in from the control pipe. */
+static int mxuport_recv_ctrl_urb(struct usb_serial *serial,
+				 u8 request, u16 value, u16 index,
+				 u8 *data, size_t size)
+{
+	int status;
+
+	status = usb_control_msg(serial->dev,
+				 usb_rcvctrlpipe(serial->dev, 0),
+				 request,
+				 (USB_DIR_IN | USB_TYPE_VENDOR |
+				  USB_RECIP_DEVICE), value, index,
+				 data, size,
+				 USB_CTRL_GET_TIMEOUT);
+	if (status < 0) {
+		dev_err(&serial->interface->dev,
+			"%s - usb_control_msg failed (%d)\n",
+			__func__, status);
+		return status;
+	}
+
+	if (status != size) {
+		dev_err(&serial->interface->dev,
+			"%s - short read (%d / %zd)\n",
+			__func__, status, size);
+		return -EIO;
+	}
+
+	return status;
+}
+
+/* Write the given buffer out to the control pipe.  */
+static int mxuport_send_ctrl_data_urb(struct usb_serial *serial,
+				      u8 request,
+				      u16 value, u16 index,
+				      u8 *data, size_t size)
+{
+	int status;
+
+	status = usb_control_msg(serial->dev,
+				 usb_sndctrlpipe(serial->dev, 0),
+				 request,
+				 (USB_DIR_OUT | USB_TYPE_VENDOR |
+				  USB_RECIP_DEVICE), value, index,
+				 data, size,
+				 USB_CTRL_SET_TIMEOUT);
+	if (status < 0) {
+		dev_err(&serial->interface->dev,
+			"%s - usb_control_msg failed (%d)\n",
+			__func__, status);
+		return status;
+	}
+
+	return 0;
+}
+
+/* Send a vendor request without any data */
+static int mxuport_send_ctrl_urb(struct usb_serial *serial,
+				 u8 request, u16 value, u16 index)
+{
+	return mxuport_send_ctrl_data_urb(serial, request, value, index,
+					  NULL, 0);
+}
+
+/*
+ * mxuport_throttle - throttle function of driver
+ *
+ * This function is called by the tty driver when it wants to stop the
+ * data being read from the port. Since all the data comes over one
+ * bulk in endpoint, we cannot stop submitting urbs by setting
+ * port->throttle. Instead tell the device to stop sending us data for
+ * the port.
+ */
+static void mxuport_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RX_HOST_EN,
+			      0, port->port_number);
+}
+
+/*
+ * mxuport_unthrottle - unthrottle function of driver
+ *
+ * This function is called by the tty driver when it wants to resume
+ * the data being read from the port. Tell the device it can resume
+ * sending us received data from the port.
+ */
+static void mxuport_unthrottle(struct tty_struct *tty)
+{
+
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RX_HOST_EN,
+			      1, port->port_number);
+}
+
+/*
+ * Processes one chunk of data received for a port.  Mostly a copy of
+ * usb_serial_generic_process_read_urb().
+ */
+static void mxuport_process_read_urb_data(struct usb_serial_port *port,
+					  char *data, int size)
+{
+	int i;
+
+	if (port->sysrq) {
+		for (i = 0; i < size; i++, data++) {
+			if (!usb_serial_handle_sysrq_char(port, *data))
+				tty_insert_flip_char(&port->port, *data,
+						     TTY_NORMAL);
+		}
+	} else {
+		tty_insert_flip_string(&port->port, data, size);
+	}
+	tty_flip_buffer_push(&port->port);
+}
+
+static void mxuport_msr_event(struct usb_serial_port *port, u8 buf[4])
+{
+	struct mxuport_port *mxport = usb_get_serial_port_data(port);
+	u8 rcv_msr_hold = buf[2] & 0xF0;
+	u16 rcv_msr_event = get_unaligned_be16(buf);
+	unsigned long flags;
+
+	if (rcv_msr_event == 0)
+		return;
+
+	/* Update MSR status */
+	spin_lock_irqsave(&mxport->spinlock, flags);
+
+	dev_dbg(&port->dev, "%s - current MSR status = 0x%x\n",
+		__func__, mxport->msr_state);
+
+	if (rcv_msr_hold & UART_MSR_CTS) {
+		mxport->msr_state |= UART_MSR_CTS;
+		dev_dbg(&port->dev, "%s - CTS high\n", __func__);
+	} else {
+		mxport->msr_state &= ~UART_MSR_CTS;
+		dev_dbg(&port->dev, "%s - CTS low\n", __func__);
+	}
+
+	if (rcv_msr_hold & UART_MSR_DSR) {
+		mxport->msr_state |= UART_MSR_DSR;
+		dev_dbg(&port->dev, "%s - DSR high\n", __func__);
+	} else {
+		mxport->msr_state &= ~UART_MSR_DSR;
+		dev_dbg(&port->dev, "%s - DSR low\n", __func__);
+	}
+
+	if (rcv_msr_hold & UART_MSR_DCD) {
+		mxport->msr_state |= UART_MSR_DCD;
+		dev_dbg(&port->dev, "%s - DCD high\n", __func__);
+	} else {
+		mxport->msr_state &= ~UART_MSR_DCD;
+		dev_dbg(&port->dev, "%s - DCD low\n", __func__);
+	}
+	spin_unlock_irqrestore(&mxport->spinlock, flags);
+
+	if (rcv_msr_event &
+	    (SERIAL_EV_CTS | SERIAL_EV_DSR | SERIAL_EV_RLSD)) {
+
+		if (rcv_msr_event & SERIAL_EV_CTS) {
+			port->icount.cts++;
+			dev_dbg(&port->dev, "%s - CTS change\n", __func__);
+		}
+
+		if (rcv_msr_event & SERIAL_EV_DSR) {
+			port->icount.dsr++;
+			dev_dbg(&port->dev, "%s - DSR change\n", __func__);
+		}
+
+		if (rcv_msr_event & SERIAL_EV_RLSD) {
+			port->icount.dcd++;
+			dev_dbg(&port->dev, "%s - DCD change\n", __func__);
+		}
+		wake_up_interruptible(&port->port.delta_msr_wait);
+	}
+}
+
+static void mxuport_lsr_event(struct usb_serial_port *port, u8 buf[4])
+{
+	u8 lsr_event = buf[2];
+
+	if (lsr_event & UART_LSR_BI) {
+		port->icount.brk++;
+		dev_dbg(&port->dev, "%s - break error\n", __func__);
+	}
+
+	if (lsr_event & UART_LSR_FE) {
+		port->icount.frame++;
+		dev_dbg(&port->dev, "%s - frame error\n", __func__);
+	}
+
+	if (lsr_event & UART_LSR_PE) {
+		port->icount.parity++;
+		dev_dbg(&port->dev, "%s - parity error\n", __func__);
+	}
+
+	if (lsr_event & UART_LSR_OE) {
+		port->icount.overrun++;
+		dev_dbg(&port->dev, "%s - overrun error\n", __func__);
+	}
+}
+
+/*
+ * When something interesting happens, modem control lines XON/XOFF
+ * etc, the device sends an event. Process these events.
+ */
+static void mxuport_process_read_urb_event(struct usb_serial_port *port,
+					   u8 buf[4], u32 event)
+{
+	dev_dbg(&port->dev, "%s - receive event : %04x\n", __func__, event);
+
+	switch (event) {
+	case UPORT_EVENT_SEND_NEXT:
+		/*
+		 * Sent as part of the flow control on device buffers.
+		 * Not currently used.
+		 */
+		break;
+	case UPORT_EVENT_MSR:
+		mxuport_msr_event(port, buf);
+		break;
+	case UPORT_EVENT_LSR:
+		mxuport_lsr_event(port, buf);
+		break;
+	case UPORT_EVENT_MCR:
+		/*
+		 * Event to indicate a change in XON/XOFF from the
+		 * peer.  Currently not used. We just continue
+		 * sending the device data and it will buffer it if
+		 * needed. This event could be used for flow control
+		 * between the host and the device.
+		 */
+		break;
+	default:
+		dev_dbg(&port->dev, "Unexpected event\n");
+		break;
+	}
+}
+
+/*
+ * One URB can contain data for multiple ports. Demultiplex the data,
+ * checking the port exists, is opened and the message is valid.
+ */
+static void mxuport_process_read_urb_demux_data(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct usb_serial *serial = port->serial;
+	u8 *data = urb->transfer_buffer;
+	u8 *end = data + urb->actual_length;
+	struct usb_serial_port *demux_port;
+	u8 *ch;
+	u16 rcv_port;
+	u16 rcv_len;
+
+	while (data < end) {
+		if (data + HEADER_SIZE > end) {
+			dev_warn(&port->dev, "%s - message with short header\n",
+				 __func__);
+			return;
+		}
+
+		rcv_port = get_unaligned_be16(data);
+		if (rcv_port >= serial->num_ports) {
+			dev_warn(&port->dev, "%s - message for invalid port\n",
+				 __func__);
+			return;
+		}
+
+		demux_port = serial->port[rcv_port];
+		rcv_len = get_unaligned_be16(data + 2);
+		if (!rcv_len || data + HEADER_SIZE + rcv_len > end) {
+			dev_warn(&port->dev, "%s - short data\n", __func__);
+			return;
+		}
+
+		if (tty_port_initialized(&demux_port->port)) {
+			ch = data + HEADER_SIZE;
+			mxuport_process_read_urb_data(demux_port, ch, rcv_len);
+		} else {
+			dev_dbg(&demux_port->dev, "%s - data for closed port\n",
+				__func__);
+		}
+		data += HEADER_SIZE + rcv_len;
+	}
+}
+
+/*
+ * One URB can contain events for multiple ports. Demultiplex the event,
+ * checking the port exists, and is opened.
+ */
+static void mxuport_process_read_urb_demux_event(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct usb_serial *serial = port->serial;
+	u8 *data = urb->transfer_buffer;
+	u8 *end = data + urb->actual_length;
+	struct usb_serial_port *demux_port;
+	u8 *ch;
+	u16 rcv_port;
+	u16 rcv_event;
+
+	while (data < end) {
+		if (data + EVENT_LENGTH > end) {
+			dev_warn(&port->dev, "%s - message with short event\n",
+				 __func__);
+			return;
+		}
+
+		rcv_port = get_unaligned_be16(data);
+		if (rcv_port >= serial->num_ports) {
+			dev_warn(&port->dev, "%s - message for invalid port\n",
+				 __func__);
+			return;
+		}
+
+		demux_port = serial->port[rcv_port];
+		if (tty_port_initialized(&demux_port->port)) {
+			ch = data + HEADER_SIZE;
+			rcv_event = get_unaligned_be16(data + 2);
+			mxuport_process_read_urb_event(demux_port, ch,
+						       rcv_event);
+		} else {
+			dev_dbg(&demux_port->dev,
+				"%s - event for closed port\n", __func__);
+		}
+		data += EVENT_LENGTH;
+	}
+}
+
+/*
+ * This is called when we have received data on the bulk in
+ * endpoint. Depending on which port it was received on, it can
+ * contain serial data or events.
+ */
+static void mxuport_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct usb_serial *serial = port->serial;
+
+	if (port == serial->port[0])
+		mxuport_process_read_urb_demux_data(urb);
+
+	if (port == serial->port[1])
+		mxuport_process_read_urb_demux_event(urb);
+}
+
+/*
+ * Ask the device how many bytes it has queued to be sent out. If
+ * there are none, return true.
+ */
+static bool mxuport_tx_empty(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	bool is_empty = true;
+	u32 txlen;
+	u8 *len_buf;
+	int err;
+
+	len_buf = kzalloc(4, GFP_KERNEL);
+	if (!len_buf)
+		goto out;
+
+	err = mxuport_recv_ctrl_urb(serial, RQ_VENDOR_GET_OUTQUEUE, 0,
+				    port->port_number, len_buf, 4);
+	if (err < 0)
+		goto out;
+
+	txlen = get_unaligned_be32(len_buf);
+	dev_dbg(&port->dev, "%s - tx len = %u\n", __func__, txlen);
+
+	if (txlen != 0)
+		is_empty = false;
+
+out:
+	kfree(len_buf);
+	return is_empty;
+}
+
+static int mxuport_set_mcr(struct usb_serial_port *port, u8 mcr_state)
+{
+	struct usb_serial *serial = port->serial;
+	int err;
+
+	dev_dbg(&port->dev, "%s - %02x\n", __func__, mcr_state);
+
+	err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_MCR,
+				    mcr_state, port->port_number);
+	if (err)
+		dev_err(&port->dev, "%s - failed to change MCR\n", __func__);
+
+	return err;
+}
+
+static int mxuport_set_dtr(struct usb_serial_port *port, int on)
+{
+	struct mxuport_port *mxport = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	int err;
+
+	mutex_lock(&mxport->mutex);
+
+	err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_DTR,
+				    !!on, port->port_number);
+	if (!err) {
+		if (on)
+			mxport->mcr_state |= UART_MCR_DTR;
+		else
+			mxport->mcr_state &= ~UART_MCR_DTR;
+	}
+
+	mutex_unlock(&mxport->mutex);
+
+	return err;
+}
+
+static int mxuport_set_rts(struct usb_serial_port *port, u8 state)
+{
+	struct mxuport_port *mxport = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	int err;
+	u8 mcr_state;
+
+	mutex_lock(&mxport->mutex);
+	mcr_state = mxport->mcr_state;
+
+	switch (state) {
+	case MX_RTS_DISABLE:
+		mcr_state &= ~UART_MCR_RTS;
+		break;
+	case MX_RTS_ENABLE:
+		mcr_state |= UART_MCR_RTS;
+		break;
+	case MX_RTS_HW:
+		/*
+		 * Do not update mxport->mcr_state when doing hardware
+		 * flow control.
+		 */
+		break;
+	default:
+		/*
+		 * Should not happen, but somebody might try passing
+		 * MX_RTS_NO_CHANGE, which is not valid.
+		 */
+		err = -EINVAL;
+		goto out;
+	}
+	err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RTS,
+				    state, port->port_number);
+	if (!err)
+		mxport->mcr_state = mcr_state;
+
+out:
+	mutex_unlock(&mxport->mutex);
+
+	return err;
+}
+
+static void mxuport_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct mxuport_port *mxport = usb_get_serial_port_data(port);
+	u8 mcr_state;
+	int err;
+
+	mutex_lock(&mxport->mutex);
+	mcr_state = mxport->mcr_state;
+
+	if (on)
+		mcr_state |= (UART_MCR_RTS | UART_MCR_DTR);
+	else
+		mcr_state &= ~(UART_MCR_RTS | UART_MCR_DTR);
+
+	err = mxuport_set_mcr(port, mcr_state);
+	if (!err)
+		mxport->mcr_state = mcr_state;
+
+	mutex_unlock(&mxport->mutex);
+}
+
+static int mxuport_tiocmset(struct tty_struct *tty, unsigned int set,
+			    unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct mxuport_port *mxport = usb_get_serial_port_data(port);
+	int err;
+	u8 mcr_state;
+
+	mutex_lock(&mxport->mutex);
+	mcr_state = mxport->mcr_state;
+
+	if (set & TIOCM_RTS)
+		mcr_state |= UART_MCR_RTS;
+
+	if (set & TIOCM_DTR)
+		mcr_state |= UART_MCR_DTR;
+
+	if (clear & TIOCM_RTS)
+		mcr_state &= ~UART_MCR_RTS;
+
+	if (clear & TIOCM_DTR)
+		mcr_state &= ~UART_MCR_DTR;
+
+	err = mxuport_set_mcr(port, mcr_state);
+	if (!err)
+		mxport->mcr_state = mcr_state;
+
+	mutex_unlock(&mxport->mutex);
+
+	return err;
+}
+
+static int mxuport_tiocmget(struct tty_struct *tty)
+{
+	struct mxuport_port *mxport;
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned int result;
+	unsigned long flags;
+	unsigned int msr;
+	unsigned int mcr;
+
+	mxport = usb_get_serial_port_data(port);
+
+	mutex_lock(&mxport->mutex);
+	spin_lock_irqsave(&mxport->spinlock, flags);
+
+	msr = mxport->msr_state;
+	mcr = mxport->mcr_state;
+
+	spin_unlock_irqrestore(&mxport->spinlock, flags);
+	mutex_unlock(&mxport->mutex);
+
+	result = (((mcr & UART_MCR_DTR) ? TIOCM_DTR : 0) |	/* 0x002 */
+		  ((mcr & UART_MCR_RTS) ? TIOCM_RTS : 0) |	/* 0x004 */
+		  ((msr & UART_MSR_CTS) ? TIOCM_CTS : 0) |	/* 0x020 */
+		  ((msr & UART_MSR_DCD) ? TIOCM_CAR : 0) |	/* 0x040 */
+		  ((msr & UART_MSR_RI) ? TIOCM_RI : 0) |	/* 0x080 */
+		  ((msr & UART_MSR_DSR) ? TIOCM_DSR : 0));	/* 0x100 */
+
+	dev_dbg(&port->dev, "%s - 0x%04x\n", __func__, result);
+
+	return result;
+}
+
+static int mxuport_set_termios_flow(struct tty_struct *tty,
+				    const struct ktermios *old_termios,
+				    struct usb_serial_port *port,
+				    struct usb_serial *serial)
+{
+	u8 xon = START_CHAR(tty);
+	u8 xoff = STOP_CHAR(tty);
+	int enable;
+	int err;
+	u8 *buf;
+	u8 rts;
+
+	buf = kmalloc(2, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	/* S/W flow control settings */
+	if (I_IXOFF(tty) || I_IXON(tty)) {
+		enable = 1;
+		buf[0] = xon;
+		buf[1] = xoff;
+
+		err = mxuport_send_ctrl_data_urb(serial, RQ_VENDOR_SET_CHARS,
+						 0, port->port_number,
+						 buf, 2);
+		if (err)
+			goto out;
+
+		dev_dbg(&port->dev, "%s - XON = 0x%02x, XOFF = 0x%02x\n",
+			__func__, xon, xoff);
+	} else {
+		enable = 0;
+	}
+
+	err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_XONXOFF,
+				    enable, port->port_number);
+	if (err)
+		goto out;
+
+	rts = MX_RTS_NO_CHANGE;
+
+	/* H/W flow control settings */
+	if (!old_termios ||
+	    C_CRTSCTS(tty) != (old_termios->c_cflag & CRTSCTS)) {
+		if (C_CRTSCTS(tty))
+			rts = MX_RTS_HW;
+		else
+			rts = MX_RTS_ENABLE;
+	}
+
+	if (C_BAUD(tty)) {
+		if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
+			/* Raise DTR and RTS */
+			if (C_CRTSCTS(tty))
+				rts = MX_RTS_HW;
+			else
+				rts = MX_RTS_ENABLE;
+			mxuport_set_dtr(port, 1);
+		}
+	} else {
+		/* Drop DTR and RTS */
+		rts = MX_RTS_DISABLE;
+		mxuport_set_dtr(port, 0);
+	}
+
+	if (rts != MX_RTS_NO_CHANGE)
+		err = mxuport_set_rts(port, rts);
+
+out:
+	kfree(buf);
+	return err;
+}
+
+static void mxuport_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
+				const struct ktermios *old_termios)
+{
+	struct usb_serial *serial = port->serial;
+	u8 *buf;
+	u8 data_bits;
+	u8 stop_bits;
+	u8 parity;
+	int baud;
+	int err;
+
+	if (old_termios &&
+	    !tty_termios_hw_change(&tty->termios, old_termios) &&
+	    tty->termios.c_iflag == old_termios->c_iflag) {
+		dev_dbg(&port->dev, "%s - nothing to change\n", __func__);
+		return;
+	}
+
+	buf = kmalloc(4, GFP_KERNEL);
+	if (!buf)
+		return;
+
+	/* Set data bit of termios */
+	switch (C_CSIZE(tty)) {
+	case CS5:
+		data_bits = MX_WORDLENGTH_5;
+		break;
+	case CS6:
+		data_bits = MX_WORDLENGTH_6;
+		break;
+	case CS7:
+		data_bits = MX_WORDLENGTH_7;
+		break;
+	case CS8:
+	default:
+		data_bits = MX_WORDLENGTH_8;
+		break;
+	}
+
+	/* Set parity of termios */
+	if (C_PARENB(tty)) {
+		if (C_CMSPAR(tty)) {
+			if (C_PARODD(tty))
+				parity = MX_PARITY_MARK;
+			else
+				parity = MX_PARITY_SPACE;
+		} else {
+			if (C_PARODD(tty))
+				parity = MX_PARITY_ODD;
+			else
+				parity = MX_PARITY_EVEN;
+		}
+	} else {
+		parity = MX_PARITY_NONE;
+	}
+
+	/* Set stop bit of termios */
+	if (C_CSTOPB(tty))
+		stop_bits = MX_STOP_BITS_2;
+	else
+		stop_bits = MX_STOP_BITS_1;
+
+	buf[0] = data_bits;
+	buf[1] = parity;
+	buf[2] = stop_bits;
+	buf[3] = 0;
+
+	err = mxuport_send_ctrl_data_urb(serial, RQ_VENDOR_SET_LINE,
+					 0, port->port_number, buf, 4);
+	if (err)
+		goto out;
+
+	err = mxuport_set_termios_flow(tty, old_termios, port, serial);
+	if (err)
+		goto out;
+
+	baud = tty_get_baud_rate(tty);
+	if (!baud)
+		baud = 9600;
+
+	/* Note: Little Endian */
+	put_unaligned_le32(baud, buf);
+
+	err = mxuport_send_ctrl_data_urb(serial, RQ_VENDOR_SET_BAUD,
+					 0, port->port_number,
+					 buf, 4);
+	if (err)
+		goto out;
+
+	dev_dbg(&port->dev, "baud_rate	: %d\n", baud);
+	dev_dbg(&port->dev, "data_bits	: %d\n", data_bits);
+	dev_dbg(&port->dev, "parity	: %d\n", parity);
+	dev_dbg(&port->dev, "stop_bits	: %d\n", stop_bits);
+
+out:
+	kfree(buf);
+}
+
+/*
+ * Determine how many ports this device has dynamically.  It will be
+ * called after the probe() callback is called, but before attach().
+ */
+static int mxuport_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds)
+{
+	unsigned long features = (unsigned long)usb_get_serial_data(serial);
+	int num_ports;
+	int i;
+
+	if (features & MX_UPORT_2_PORT) {
+		num_ports = 2;
+	} else if (features & MX_UPORT_4_PORT) {
+		num_ports = 4;
+	} else if (features & MX_UPORT_8_PORT) {
+		num_ports = 8;
+	} else if (features & MX_UPORT_16_PORT) {
+		num_ports = 16;
+	} else {
+		dev_warn(&serial->interface->dev,
+				"unknown device, assuming two ports\n");
+		num_ports = 2;
+	}
+
+	/*
+	 * Setup bulk-out endpoint multiplexing. All ports share the same
+	 * bulk-out endpoint.
+	 */
+	BUILD_BUG_ON(ARRAY_SIZE(epds->bulk_out) < 16);
+
+	for (i = 1; i < num_ports; ++i)
+		epds->bulk_out[i] = epds->bulk_out[0];
+
+	epds->num_bulk_out = num_ports;
+
+	return num_ports;
+}
+
+/* Get the version of the firmware currently running. */
+static int mxuport_get_fw_version(struct usb_serial *serial, u32 *version)
+{
+	u8 *ver_buf;
+	int err;
+
+	ver_buf = kzalloc(4, GFP_KERNEL);
+	if (!ver_buf)
+		return -ENOMEM;
+
+	/* Get firmware version from SDRAM */
+	err = mxuport_recv_ctrl_urb(serial, RQ_VENDOR_GET_VERSION, 0, 0,
+				    ver_buf, 4);
+	if (err != 4) {
+		err = -EIO;
+		goto out;
+	}
+
+	*version = (ver_buf[0] << 16) | (ver_buf[1] << 8) | ver_buf[2];
+	err = 0;
+out:
+	kfree(ver_buf);
+	return err;
+}
+
+/* Given a firmware blob, download it to the device. */
+static int mxuport_download_fw(struct usb_serial *serial,
+			       const struct firmware *fw_p)
+{
+	u8 *fw_buf;
+	size_t txlen;
+	size_t fwidx;
+	int err;
+
+	fw_buf = kmalloc(DOWN_BLOCK_SIZE, GFP_KERNEL);
+	if (!fw_buf)
+		return -ENOMEM;
+
+	dev_dbg(&serial->interface->dev, "Starting firmware download...\n");
+	err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_START_FW_DOWN, 0, 0);
+	if (err)
+		goto out;
+
+	fwidx = 0;
+	do {
+		txlen = min_t(size_t, (fw_p->size - fwidx), DOWN_BLOCK_SIZE);
+
+		memcpy(fw_buf, &fw_p->data[fwidx], txlen);
+		err = mxuport_send_ctrl_data_urb(serial, RQ_VENDOR_FW_DATA,
+						 0, 0, fw_buf, txlen);
+		if (err) {
+			mxuport_send_ctrl_urb(serial, RQ_VENDOR_STOP_FW_DOWN,
+					      0, 0);
+			goto out;
+		}
+
+		fwidx += txlen;
+		usleep_range(1000, 2000);
+
+	} while (fwidx < fw_p->size);
+
+	msleep(1000);
+	err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_STOP_FW_DOWN, 0, 0);
+	if (err)
+		goto out;
+
+	msleep(1000);
+	err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_QUERY_FW_READY, 0, 0);
+
+out:
+	kfree(fw_buf);
+	return err;
+}
+
+static int mxuport_probe(struct usb_serial *serial,
+			 const struct usb_device_id *id)
+{
+	u16 productid = le16_to_cpu(serial->dev->descriptor.idProduct);
+	const struct firmware *fw_p = NULL;
+	u32 version;
+	int local_ver;
+	char buf[32];
+	int err;
+
+	/* Load our firmware */
+	err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_QUERY_FW_CONFIG, 0, 0);
+	if (err) {
+		mxuport_send_ctrl_urb(serial, RQ_VENDOR_RESET_DEVICE, 0, 0);
+		return err;
+	}
+
+	err = mxuport_get_fw_version(serial, &version);
+	if (err < 0)
+		return err;
+
+	dev_dbg(&serial->interface->dev, "Device firmware version v%x.%x.%x\n",
+		(version & 0xff0000) >> 16,
+		(version & 0xff00) >> 8,
+		(version & 0xff));
+
+	snprintf(buf, sizeof(buf) - 1, "moxa/moxa-%04x.fw", productid);
+
+	err = request_firmware(&fw_p, buf, &serial->interface->dev);
+	if (err) {
+		dev_warn(&serial->interface->dev, "Firmware %s not found\n",
+			 buf);
+
+		/* Use the firmware already in the device */
+		err = 0;
+	} else {
+		local_ver = ((fw_p->data[VER_ADDR_1] << 16) |
+			     (fw_p->data[VER_ADDR_2] << 8) |
+			     fw_p->data[VER_ADDR_3]);
+		dev_dbg(&serial->interface->dev,
+			"Available firmware version v%x.%x.%x\n",
+			fw_p->data[VER_ADDR_1], fw_p->data[VER_ADDR_2],
+			fw_p->data[VER_ADDR_3]);
+		if (local_ver > version) {
+			err = mxuport_download_fw(serial, fw_p);
+			if (err)
+				goto out;
+			err  = mxuport_get_fw_version(serial, &version);
+			if (err < 0)
+				goto out;
+		}
+	}
+
+	dev_info(&serial->interface->dev,
+		 "Using device firmware version v%x.%x.%x\n",
+		 (version & 0xff0000) >> 16,
+		 (version & 0xff00) >> 8,
+		 (version & 0xff));
+
+	/*
+	 * Contains the features of this hardware. Store away for
+	 * later use, eg, number of ports.
+	 */
+	usb_set_serial_data(serial, (void *)id->driver_info);
+out:
+	if (fw_p)
+		release_firmware(fw_p);
+	return err;
+}
+
+
+static int mxuport_port_probe(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct mxuport_port *mxport;
+	int err;
+
+	mxport = devm_kzalloc(&port->dev, sizeof(struct mxuport_port),
+			      GFP_KERNEL);
+	if (!mxport)
+		return -ENOMEM;
+
+	mutex_init(&mxport->mutex);
+	spin_lock_init(&mxport->spinlock);
+
+	/* Set the port private data */
+	usb_set_serial_port_data(port, mxport);
+
+	/* Set FIFO (Enable) */
+	err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_FIFO_DISABLE,
+				    0, port->port_number);
+	if (err)
+		return err;
+
+	/* Set transmission mode (Hi-Performance) */
+	err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_HIGH_PERFOR,
+				    0, port->port_number);
+	if (err)
+		return err;
+
+	/* Set interface (RS-232) */
+	return mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_INTERFACE,
+				     MX_INT_RS232,
+				     port->port_number);
+}
+
+static int mxuport_attach(struct usb_serial *serial)
+{
+	struct usb_serial_port *port0 = serial->port[0];
+	struct usb_serial_port *port1 = serial->port[1];
+	int err;
+
+	/*
+	 * All data from the ports is received on the first bulk in
+	 * endpoint, with a multiplex header. The second bulk in is
+	 * used for events.
+	 *
+	 * Start to read from the device.
+	 */
+	err = usb_serial_generic_submit_read_urbs(port0, GFP_KERNEL);
+	if (err)
+		return err;
+
+	err = usb_serial_generic_submit_read_urbs(port1, GFP_KERNEL);
+	if (err) {
+		usb_serial_generic_close(port0);
+		return err;
+	}
+
+	return 0;
+}
+
+static void mxuport_release(struct usb_serial *serial)
+{
+	struct usb_serial_port *port0 = serial->port[0];
+	struct usb_serial_port *port1 = serial->port[1];
+
+	usb_serial_generic_close(port1);
+	usb_serial_generic_close(port0);
+}
+
+static int mxuport_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct mxuport_port *mxport = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	int err;
+
+	/* Set receive host (enable) */
+	err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RX_HOST_EN,
+				    1, port->port_number);
+	if (err)
+		return err;
+
+	err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_OPEN,
+				    1, port->port_number);
+	if (err) {
+		mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RX_HOST_EN,
+				      0, port->port_number);
+		return err;
+	}
+
+	/* Initial port termios */
+	if (tty)
+		mxuport_set_termios(tty, port, NULL);
+
+	/*
+	 * TODO: use RQ_VENDOR_GET_MSR, once we know what it
+	 * returns.
+	 */
+	mxport->msr_state = 0;
+
+	return err;
+}
+
+static void mxuport_close(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+
+	mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_OPEN, 0,
+			      port->port_number);
+
+	mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RX_HOST_EN, 0,
+			      port->port_number);
+}
+
+/* Send a break to the port. */
+static void mxuport_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
+	int enable;
+
+	if (break_state == -1) {
+		enable = 1;
+		dev_dbg(&port->dev, "%s - sending break\n", __func__);
+	} else {
+		enable = 0;
+		dev_dbg(&port->dev, "%s - clearing break\n", __func__);
+	}
+
+	mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_BREAK,
+			      enable, port->port_number);
+}
+
+static int mxuport_resume(struct usb_serial *serial)
+{
+	struct usb_serial_port *port;
+	int c = 0;
+	int i;
+	int r;
+
+	for (i = 0; i < 2; i++) {
+		port = serial->port[i];
+
+		r = usb_serial_generic_submit_read_urbs(port, GFP_NOIO);
+		if (r < 0)
+			c++;
+	}
+
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		if (!tty_port_initialized(&port->port))
+			continue;
+
+		r = usb_serial_generic_write_start(port, GFP_NOIO);
+		if (r < 0)
+			c++;
+	}
+
+	return c ? -EIO : 0;
+}
+
+static struct usb_serial_driver mxuport_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"mxuport",
+	},
+	.description		= "MOXA UPort",
+	.id_table		= mxuport_idtable,
+	.num_bulk_in		= 2,
+	.num_bulk_out		= 1,
+	.probe			= mxuport_probe,
+	.port_probe		= mxuport_port_probe,
+	.attach			= mxuport_attach,
+	.release		= mxuport_release,
+	.calc_num_ports		= mxuport_calc_num_ports,
+	.open			= mxuport_open,
+	.close			= mxuport_close,
+	.set_termios		= mxuport_set_termios,
+	.break_ctl		= mxuport_break_ctl,
+	.tx_empty		= mxuport_tx_empty,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
+	.throttle		= mxuport_throttle,
+	.unthrottle		= mxuport_unthrottle,
+	.tiocmget		= mxuport_tiocmget,
+	.tiocmset		= mxuport_tiocmset,
+	.dtr_rts		= mxuport_dtr_rts,
+	.process_read_urb	= mxuport_process_read_urb,
+	.prepare_write_buffer	= mxuport_prepare_write_buffer,
+	.resume			= mxuport_resume,
+};
+
+static struct usb_serial_driver *const serial_drivers[] = {
+	&mxuport_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, mxuport_idtable);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_AUTHOR("<support@moxa.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
new file mode 100644
index 000000000..20277c52d
--- /dev/null
+++ b/drivers/usb/serial/navman.c
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Navman Serial USB driver
+ *
+ * Copyright (C) 2006 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * TODO:
+ *	Add termios method that uses copy_hw but also kills all echo
+ *	flags as the navman is rx only so cannot echo.
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x0a99, 0x0001) },	/* Talon Technology device */
+	{ USB_DEVICE(0x0df7, 0x0900) },	/* Mobile Action i-gotU */
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static void navman_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	int status = urb->status;
+	int result;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
+		return;
+	default:
+		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
+		goto exit;
+	}
+
+	usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
+
+	if (urb->actual_length) {
+		tty_insert_flip_string(&port->port, data, urb->actual_length);
+		tty_flip_buffer_push(&port->port);
+	}
+
+exit:
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result)
+		dev_err(&urb->dev->dev,
+			"%s - Error %d submitting interrupt urb\n",
+			__func__, result);
+}
+
+static int navman_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	int result = 0;
+
+	if (port->interrupt_in_urb) {
+		dev_dbg(&port->dev, "%s - adding interrupt input for treo\n",
+			__func__);
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+		if (result)
+			dev_err(&port->dev,
+				"%s - failed submitting interrupt urb, error %d\n",
+				__func__, result);
+	}
+	return result;
+}
+
+static void navman_close(struct usb_serial_port *port)
+{
+	usb_kill_urb(port->interrupt_in_urb);
+}
+
+static int navman_write(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *buf, int count)
+{
+	/*
+	 * This device can't write any data, only read from the device
+	 */
+	return -EOPNOTSUPP;
+}
+
+static struct usb_serial_driver navman_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"navman",
+	},
+	.id_table =		id_table,
+	.num_ports =		1,
+	.open =			navman_open,
+	.close = 		navman_close,
+	.write = 		navman_write,
+	.read_int_callback =	navman_read_int_callback,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&navman_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
new file mode 100644
index 000000000..41f1b872d
--- /dev/null
+++ b/drivers/usb/serial/omninet.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB ZyXEL omni.net driver
+ *
+ * Copyright (C) 2013,2017 Johan Hovold <johan@kernel.org>
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ *
+ * Please report both successes and troubles to the author at omninet@kroah.com
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define DRIVER_AUTHOR "Alessandro Zummo"
+#define DRIVER_DESC "USB ZyXEL omni.net Driver"
+
+#define ZYXEL_VENDOR_ID		0x0586
+#define ZYXEL_OMNINET_ID	0x1000
+#define ZYXEL_OMNI_56K_PLUS_ID	0x1500
+/* This one seems to be a re-branded ZyXEL device */
+#define BT_IGNITIONPRO_ID	0x2000
+
+/* function prototypes */
+static void omninet_process_read_urb(struct urb *urb);
+static int omninet_prepare_write_buffer(struct usb_serial_port *port,
+				void *buf, size_t count);
+static int omninet_calc_num_ports(struct usb_serial *serial,
+				struct usb_serial_endpoints *epds);
+static int omninet_port_probe(struct usb_serial_port *port);
+static void omninet_port_remove(struct usb_serial_port *port);
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
+	{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNI_56K_PLUS_ID) },
+	{ USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) },
+	{ }						/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_serial_driver zyxel_omninet_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"omninet",
+	},
+	.description =		"ZyXEL - omni.net usb",
+	.id_table =		id_table,
+	.num_bulk_out =		2,
+	.calc_num_ports =	omninet_calc_num_ports,
+	.port_probe =		omninet_port_probe,
+	.port_remove =		omninet_port_remove,
+	.process_read_urb =	omninet_process_read_urb,
+	.prepare_write_buffer =	omninet_prepare_write_buffer,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&zyxel_omninet_device, NULL
+};
+
+
+/*
+ * The protocol.
+ *
+ * The omni.net always exchange 64 bytes of data with the host. The first
+ * four bytes are the control header.
+ *
+ * oh_seq is a sequence number. Don't know if/how it's used.
+ * oh_len is the length of the data bytes in the packet.
+ * oh_xxx Bit-mapped, related to handshaking and status info.
+ *	I normally set it to 0x03 in transmitted frames.
+ *	7: Active when the TA is in a CONNECTed state.
+ *	6: unknown
+ *	5: handshaking, unknown
+ *	4: handshaking, unknown
+ *	3: unknown, usually 0
+ *	2: unknown, usually 0
+ *	1: handshaking, unknown, usually set to 1 in transmitted frames
+ *	0: handshaking, unknown, usually set to 1 in transmitted frames
+ * oh_pad Probably a pad byte.
+ *
+ * After the header you will find data bytes if oh_len was greater than zero.
+ */
+struct omninet_header {
+	__u8	oh_seq;
+	__u8	oh_len;
+	__u8	oh_xxx;
+	__u8	oh_pad;
+};
+
+struct omninet_data {
+	__u8	od_outseq;	/* Sequence number for bulk_out URBs */
+};
+
+static int omninet_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds)
+{
+	/* We need only the second bulk-out for our single-port device. */
+	epds->bulk_out[0] = epds->bulk_out[1];
+	epds->num_bulk_out = 1;
+
+	return 1;
+}
+
+static int omninet_port_probe(struct usb_serial_port *port)
+{
+	struct omninet_data *od;
+
+	od = kzalloc(sizeof(*od), GFP_KERNEL);
+	if (!od)
+		return -ENOMEM;
+
+	usb_set_serial_port_data(port, od);
+
+	return 0;
+}
+
+static void omninet_port_remove(struct usb_serial_port *port)
+{
+	struct omninet_data *od;
+
+	od = usb_get_serial_port_data(port);
+	kfree(od);
+}
+
+#define OMNINET_HEADERLEN	4
+#define OMNINET_BULKOUTSIZE	64
+#define OMNINET_PAYLOADSIZE	(OMNINET_BULKOUTSIZE - OMNINET_HEADERLEN)
+
+static void omninet_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	const struct omninet_header *hdr = urb->transfer_buffer;
+	const unsigned char *data;
+	size_t data_len;
+
+	if (urb->actual_length <= OMNINET_HEADERLEN || !hdr->oh_len)
+		return;
+
+	data = (char *)urb->transfer_buffer + OMNINET_HEADERLEN;
+	data_len = min_t(size_t, urb->actual_length - OMNINET_HEADERLEN,
+								hdr->oh_len);
+	tty_insert_flip_string(&port->port, data, data_len);
+	tty_flip_buffer_push(&port->port);
+}
+
+static int omninet_prepare_write_buffer(struct usb_serial_port *port,
+					void *buf, size_t count)
+{
+	struct omninet_data *od = usb_get_serial_port_data(port);
+	struct omninet_header *header = buf;
+
+	count = min_t(size_t, count, OMNINET_PAYLOADSIZE);
+
+	count = kfifo_out_locked(&port->write_fifo, buf + OMNINET_HEADERLEN,
+			count, &port->lock);
+
+	header->oh_seq = od->od_outseq++;
+	header->oh_len = count;
+	header->oh_xxx = 0x03;
+	header->oh_pad = 0x00;
+
+	/* always 64 bytes */
+	return OMNINET_BULKOUTSIZE;
+}
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
new file mode 100644
index 000000000..e31a6d77d
--- /dev/null
+++ b/drivers/usb/serial/opticon.c
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Opticon USB barcode to serial driver
+ *
+ * Copyright (C) 2011 - 2012 Johan Hovold <jhovold@gmail.com>
+ * Copyright (C) 2011 Martin Jansen <martin.jansen@opticon.com>
+ * Copyright (C) 2008 - 2009 Greg Kroah-Hartman <gregkh@suse.de>
+ * Copyright (C) 2008 - 2009 Novell Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/slab.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+#define CONTROL_RTS			0x02
+#define RESEND_CTS_STATE	0x03
+
+/* max number of write urbs in flight */
+#define URB_UPPER_LIMIT	8
+
+/* This driver works for the Opticon 1D barcode reader
+ * an examples of 1D barcode types are EAN, UPC, Code39, IATA etc.. */
+#define DRIVER_DESC	"Opticon USB barcode to serial driver (1D)"
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x065a, 0x0009) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* This structure holds all of the individual device information */
+struct opticon_private {
+	spinlock_t lock;	/* protects the following flags */
+	bool rts;
+	bool cts;
+	int outstanding_urbs;
+	int outstanding_bytes;
+
+	struct usb_anchor anchor;
+};
+
+
+static void opticon_process_data_packet(struct usb_serial_port *port,
+					const unsigned char *buf, size_t len)
+{
+	tty_insert_flip_string(&port->port, buf, len);
+	tty_flip_buffer_push(&port->port);
+}
+
+static void opticon_process_status_packet(struct usb_serial_port *port,
+					const unsigned char *buf, size_t len)
+{
+	struct opticon_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (buf[0] == 0x00)
+		priv->cts = false;
+	else
+		priv->cts = true;
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void opticon_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	const unsigned char *hdr = urb->transfer_buffer;
+	const unsigned char *data = hdr + 2;
+	size_t data_len = urb->actual_length - 2;
+
+	if (urb->actual_length <= 2) {
+		dev_dbg(&port->dev, "malformed packet received: %d bytes\n",
+							urb->actual_length);
+		return;
+	}
+	/*
+	 * Data from the device comes with a 2 byte header:
+	 *
+	 * <0x00><0x00>data...
+	 *      This is real data to be sent to the tty layer
+	 * <0x00><0x01>level
+	 *      This is a CTS level change, the third byte is the CTS
+	 *      value (0 for low, 1 for high).
+	 */
+	if ((hdr[0] == 0x00) && (hdr[1] == 0x00)) {
+		opticon_process_data_packet(port, data, data_len);
+	} else if ((hdr[0] == 0x00) && (hdr[1] == 0x01)) {
+		opticon_process_status_packet(port, data, data_len);
+	} else {
+		dev_dbg(&port->dev, "unknown packet received: %02x %02x\n",
+							hdr[0], hdr[1]);
+	}
+}
+
+static int send_control_msg(struct usb_serial_port *port, u8 requesttype,
+				u8 val)
+{
+	struct usb_serial *serial = port->serial;
+	int retval;
+	u8 *buffer;
+
+	buffer = kzalloc(1, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	buffer[0] = val;
+	/* Send the message to the vendor control endpoint
+	 * of the connected device */
+	retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+				requesttype,
+				USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+				0, 0, buffer, 1, USB_CTRL_SET_TIMEOUT);
+	kfree(buffer);
+
+	if (retval < 0)
+		return retval;
+
+	return 0;
+}
+
+static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct opticon_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	int res;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->rts = false;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/* Clear RTS line */
+	send_control_msg(port, CONTROL_RTS, 0);
+
+	/* clear the halt status of the endpoint */
+	usb_clear_halt(port->serial->dev, port->read_urb->pipe);
+
+	res = usb_serial_generic_open(tty, port);
+	if (res)
+		return res;
+
+	/* Request CTS line state, sometimes during opening the current
+	 * CTS state can be missed. */
+	send_control_msg(port, RESEND_CTS_STATE, 1);
+
+	return res;
+}
+
+static void opticon_close(struct usb_serial_port *port)
+{
+	struct opticon_private *priv = usb_get_serial_port_data(port);
+
+	usb_kill_anchored_urbs(&priv->anchor);
+
+	usb_serial_generic_close(port);
+}
+
+static void opticon_write_control_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct opticon_private *priv = usb_get_serial_port_data(port);
+	int status = urb->status;
+	unsigned long flags;
+
+	/* free up the transfer buffer, as usb_free_urb() does not do this */
+	kfree(urb->transfer_buffer);
+
+	/* setup packet may be set if we're using it for writing */
+	kfree(urb->setup_packet);
+
+	if (status)
+		dev_dbg(&port->dev,
+			"%s - non-zero urb status received: %d\n",
+			__func__, status);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	--priv->outstanding_urbs;
+	priv->outstanding_bytes -= urb->transfer_buffer_length;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	usb_serial_port_softint(port);
+}
+
+static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
+			 const unsigned char *buf, int count)
+{
+	struct opticon_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	struct urb *urb;
+	unsigned char *buffer;
+	unsigned long flags;
+	struct usb_ctrlrequest *dr;
+	int ret = -ENOMEM;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		dev_dbg(&port->dev, "%s - write limit hit\n", __func__);
+		return 0;
+	}
+	priv->outstanding_urbs++;
+	priv->outstanding_bytes += count;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	buffer = kmemdup(buf, count, GFP_ATOMIC);
+	if (!buffer)
+		goto error_no_buffer;
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb)
+		goto error_no_urb;
+
+	usb_serial_debug_data(&port->dev, __func__, count, buffer);
+
+	/* The connected devices do not have a bulk write endpoint,
+	 * to transmit data to de barcode device the control endpoint is used */
+	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
+	if (!dr)
+		goto error_no_dr;
+
+	dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT;
+	dr->bRequest = 0x01;
+	dr->wValue = 0;
+	dr->wIndex = 0;
+	dr->wLength = cpu_to_le16(count);
+
+	usb_fill_control_urb(urb, serial->dev,
+		usb_sndctrlpipe(serial->dev, 0),
+		(unsigned char *)dr, buffer, count,
+		opticon_write_control_callback, port);
+
+	usb_anchor_urb(urb, &priv->anchor);
+
+	/* send it down the pipe */
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	if (ret) {
+		dev_err(&port->dev, "failed to submit write urb: %d\n", ret);
+		usb_unanchor_urb(urb);
+		goto error;
+	}
+
+	/* we are done with this urb, so let the host driver
+	 * really free it when it is finished with it */
+	usb_free_urb(urb);
+
+	return count;
+error:
+	kfree(dr);
+error_no_dr:
+	usb_free_urb(urb);
+error_no_urb:
+	kfree(buffer);
+error_no_buffer:
+	spin_lock_irqsave(&priv->lock, flags);
+	--priv->outstanding_urbs;
+	priv->outstanding_bytes -= count;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return ret;
+}
+
+static unsigned int opticon_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct opticon_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	/*
+	 * We really can take almost anything the user throws at us
+	 * but let's pick a nice big number to tell the tty
+	 * layer that we have lots of free space, unless we don't.
+	 */
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		dev_dbg(&port->dev, "%s - write limit hit\n", __func__);
+		return 0;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 2048;
+}
+
+static unsigned int opticon_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct opticon_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned int count;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	count = priv->outstanding_bytes;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return count;
+}
+
+static int opticon_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct opticon_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	int result = 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->rts)
+		result |= TIOCM_RTS;
+	if (priv->cts)
+		result |= TIOCM_CTS;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	dev_dbg(&port->dev, "%s - %x\n", __func__, result);
+	return result;
+}
+
+static int opticon_tiocmset(struct tty_struct *tty,
+			   unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct opticon_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	bool rts;
+	bool changed = false;
+	int ret;
+
+	/* We only support RTS so we only handle that */
+	spin_lock_irqsave(&priv->lock, flags);
+
+	rts = priv->rts;
+	if (set & TIOCM_RTS)
+		priv->rts = true;
+	if (clear & TIOCM_RTS)
+		priv->rts = false;
+	changed = rts ^ priv->rts;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (!changed)
+		return 0;
+
+	ret = send_control_msg(port, CONTROL_RTS, !rts);
+	if (ret)
+		return usb_translate_errors(ret);
+
+	return 0;
+}
+
+static int opticon_port_probe(struct usb_serial_port *port)
+{
+	struct opticon_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+	init_usb_anchor(&priv->anchor);
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
+}
+
+static void opticon_port_remove(struct usb_serial_port *port)
+{
+	struct opticon_private *priv = usb_get_serial_port_data(port);
+
+	kfree(priv);
+}
+
+static struct usb_serial_driver opticon_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"opticon",
+	},
+	.id_table =		id_table,
+	.num_ports =		1,
+	.num_bulk_in =		1,
+	.bulk_in_size =		256,
+	.port_probe =		opticon_port_probe,
+	.port_remove =		opticon_port_remove,
+	.open =			opticon_open,
+	.close =		opticon_close,
+	.write =		opticon_write,
+	.write_room = 		opticon_write_room,
+	.chars_in_buffer =	opticon_chars_in_buffer,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+	.tiocmget =		opticon_tiocmget,
+	.tiocmset =		opticon_tiocmset,
+	.process_read_urb =	opticon_process_read_urb,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&opticon_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
new file mode 100644
index 000000000..4adef9259
--- /dev/null
+++ b/drivers/usb/serial/option.c
@@ -0,0 +1,2465 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+  USB Driver for GSM modems
+
+  Copyright (C) 2005  Matthias Urlichs <smurf@smurf.noris.de>
+
+  Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
+
+  History: see the git log.
+
+  Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
+
+  This driver exists because the "normal" serial driver doesn't work too well
+  with GSM modems. Issues:
+  - data loss -- one single Receive URB is not nearly enough
+  - nonstandard flow (Option devices) control
+  - controlling the baud rate doesn't make sense
+
+  This driver is named "option" because the most common device it's
+  used for is a PC-Card (with an internal OHCI-USB interface, behind
+  which the GSM interface sits), made by Option Inc.
+
+  Some of the "one port" devices actually exhibit multiple USB instances
+  on the USB bus. This is not a bug, these ports are used for different
+  device features.
+*/
+
+#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
+#define DRIVER_DESC "USB Driver for GSM modems"
+
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include "usb-wwan.h"
+
+/* Function prototypes */
+static int  option_probe(struct usb_serial *serial,
+			const struct usb_device_id *id);
+static int option_attach(struct usb_serial *serial);
+static void option_release(struct usb_serial *serial);
+static void option_instat_callback(struct urb *urb);
+
+/* Vendor and product IDs */
+#define OPTION_VENDOR_ID			0x0AF0
+#define OPTION_PRODUCT_COLT			0x5000
+#define OPTION_PRODUCT_RICOLA			0x6000
+#define OPTION_PRODUCT_RICOLA_LIGHT		0x6100
+#define OPTION_PRODUCT_RICOLA_QUAD		0x6200
+#define OPTION_PRODUCT_RICOLA_QUAD_LIGHT	0x6300
+#define OPTION_PRODUCT_RICOLA_NDIS		0x6050
+#define OPTION_PRODUCT_RICOLA_NDIS_LIGHT	0x6150
+#define OPTION_PRODUCT_RICOLA_NDIS_QUAD		0x6250
+#define OPTION_PRODUCT_RICOLA_NDIS_QUAD_LIGHT	0x6350
+#define OPTION_PRODUCT_COBRA			0x6500
+#define OPTION_PRODUCT_COBRA_BUS		0x6501
+#define OPTION_PRODUCT_VIPER			0x6600
+#define OPTION_PRODUCT_VIPER_BUS		0x6601
+#define OPTION_PRODUCT_GT_MAX_READY		0x6701
+#define OPTION_PRODUCT_FUJI_MODEM_LIGHT		0x6721
+#define OPTION_PRODUCT_FUJI_MODEM_GT		0x6741
+#define OPTION_PRODUCT_FUJI_MODEM_EX		0x6761
+#define OPTION_PRODUCT_KOI_MODEM		0x6800
+#define OPTION_PRODUCT_SCORPION_MODEM		0x6901
+#define OPTION_PRODUCT_ETNA_MODEM		0x7001
+#define OPTION_PRODUCT_ETNA_MODEM_LITE		0x7021
+#define OPTION_PRODUCT_ETNA_MODEM_GT		0x7041
+#define OPTION_PRODUCT_ETNA_MODEM_EX		0x7061
+#define OPTION_PRODUCT_ETNA_KOI_MODEM		0x7100
+#define OPTION_PRODUCT_GTM380_MODEM		0x7201
+
+#define HUAWEI_VENDOR_ID			0x12D1
+#define HUAWEI_PRODUCT_E173			0x140C
+#define HUAWEI_PRODUCT_E1750			0x1406
+#define HUAWEI_PRODUCT_K4505			0x1464
+#define HUAWEI_PRODUCT_K3765			0x1465
+#define HUAWEI_PRODUCT_K4605			0x14C6
+#define HUAWEI_PRODUCT_E173S6			0x1C07
+
+#define QUANTA_VENDOR_ID			0x0408
+#define QUANTA_PRODUCT_Q101			0xEA02
+#define QUANTA_PRODUCT_Q111			0xEA03
+#define QUANTA_PRODUCT_GLX			0xEA04
+#define QUANTA_PRODUCT_GKE			0xEA05
+#define QUANTA_PRODUCT_GLE			0xEA06
+
+#define NOVATELWIRELESS_VENDOR_ID		0x1410
+
+/* YISO PRODUCTS */
+
+#define YISO_VENDOR_ID				0x0EAB
+#define YISO_PRODUCT_U893			0xC893
+
+/*
+ * NOVATEL WIRELESS PRODUCTS
+ *
+ * Note from Novatel Wireless:
+ * If your Novatel modem does not work on linux, don't
+ * change the option module, but check our website. If
+ * that does not help, contact ddeschepper@nvtl.com
+*/
+/* MERLIN EVDO PRODUCTS */
+#define NOVATELWIRELESS_PRODUCT_V640		0x1100
+#define NOVATELWIRELESS_PRODUCT_V620		0x1110
+#define NOVATELWIRELESS_PRODUCT_V740		0x1120
+#define NOVATELWIRELESS_PRODUCT_V720		0x1130
+
+/* MERLIN HSDPA/HSPA PRODUCTS */
+#define NOVATELWIRELESS_PRODUCT_U730		0x1400
+#define NOVATELWIRELESS_PRODUCT_U740		0x1410
+#define NOVATELWIRELESS_PRODUCT_U870		0x1420
+#define NOVATELWIRELESS_PRODUCT_XU870		0x1430
+#define NOVATELWIRELESS_PRODUCT_X950D		0x1450
+
+/* EXPEDITE PRODUCTS */
+#define NOVATELWIRELESS_PRODUCT_EV620		0x2100
+#define NOVATELWIRELESS_PRODUCT_ES720		0x2110
+#define NOVATELWIRELESS_PRODUCT_E725		0x2120
+#define NOVATELWIRELESS_PRODUCT_ES620		0x2130
+#define NOVATELWIRELESS_PRODUCT_EU730		0x2400
+#define NOVATELWIRELESS_PRODUCT_EU740		0x2410
+#define NOVATELWIRELESS_PRODUCT_EU870D		0x2420
+/* OVATION PRODUCTS */
+#define NOVATELWIRELESS_PRODUCT_MC727		0x4100
+#define NOVATELWIRELESS_PRODUCT_MC950D		0x4400
+/*
+ * Note from Novatel Wireless:
+ * All PID in the 5xxx range are currently reserved for
+ * auto-install CDROMs, and should not be added to this
+ * module.
+ *
+ * #define NOVATELWIRELESS_PRODUCT_U727		0x5010
+ * #define NOVATELWIRELESS_PRODUCT_MC727_NEW	0x5100
+*/
+#define NOVATELWIRELESS_PRODUCT_OVMC760		0x6002
+#define NOVATELWIRELESS_PRODUCT_MC780		0x6010
+#define NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED	0x6000
+#define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED	0x6001
+#define NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED	0x7000
+#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED	0x7001
+#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED3	0x7003
+#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED4	0x7004
+#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED5	0x7005
+#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED6	0x7006
+#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED7	0x7007
+#define NOVATELWIRELESS_PRODUCT_MC996D		0x7030
+#define NOVATELWIRELESS_PRODUCT_MF3470		0x7041
+#define NOVATELWIRELESS_PRODUCT_MC547		0x7042
+#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED	0x8000
+#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED	0x8001
+#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED	0x9000
+#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED	0x9001
+#define NOVATELWIRELESS_PRODUCT_E362		0x9010
+#define NOVATELWIRELESS_PRODUCT_E371		0x9011
+#define NOVATELWIRELESS_PRODUCT_U620L		0x9022
+#define NOVATELWIRELESS_PRODUCT_G2		0xA010
+#define NOVATELWIRELESS_PRODUCT_MC551		0xB001
+
+#define UBLOX_VENDOR_ID				0x1546
+
+/* AMOI PRODUCTS */
+#define AMOI_VENDOR_ID				0x1614
+#define AMOI_PRODUCT_H01			0x0800
+#define AMOI_PRODUCT_H01A			0x7002
+#define AMOI_PRODUCT_H02			0x0802
+#define AMOI_PRODUCT_SKYPEPHONE_S2		0x0407
+
+#define DELL_VENDOR_ID				0x413C
+
+/* Dell modems */
+#define DELL_PRODUCT_5700_MINICARD		0x8114
+#define DELL_PRODUCT_5500_MINICARD		0x8115
+#define DELL_PRODUCT_5505_MINICARD		0x8116
+#define DELL_PRODUCT_5700_EXPRESSCARD		0x8117
+#define DELL_PRODUCT_5510_EXPRESSCARD		0x8118
+
+#define DELL_PRODUCT_5700_MINICARD_SPRINT	0x8128
+#define DELL_PRODUCT_5700_MINICARD_TELUS	0x8129
+
+#define DELL_PRODUCT_5720_MINICARD_VZW		0x8133
+#define DELL_PRODUCT_5720_MINICARD_SPRINT	0x8134
+#define DELL_PRODUCT_5720_MINICARD_TELUS	0x8135
+#define DELL_PRODUCT_5520_MINICARD_CINGULAR	0x8136
+#define DELL_PRODUCT_5520_MINICARD_GENERIC_L	0x8137
+#define DELL_PRODUCT_5520_MINICARD_GENERIC_I	0x8138
+
+#define DELL_PRODUCT_5730_MINICARD_SPRINT	0x8180
+#define DELL_PRODUCT_5730_MINICARD_TELUS	0x8181
+#define DELL_PRODUCT_5730_MINICARD_VZW		0x8182
+
+#define DELL_PRODUCT_5800_MINICARD_VZW		0x8195  /* Novatel E362 */
+#define DELL_PRODUCT_5800_V2_MINICARD_VZW	0x8196  /* Novatel E362 */
+#define DELL_PRODUCT_5804_MINICARD_ATT		0x819b  /* Novatel E371 */
+
+#define DELL_PRODUCT_5821E			0x81d7
+#define DELL_PRODUCT_5821E_ESIM			0x81e0
+#define DELL_PRODUCT_5829E_ESIM			0x81e4
+#define DELL_PRODUCT_5829E			0x81e6
+
+#define DELL_PRODUCT_FM101R_ESIM		0x8213
+#define DELL_PRODUCT_FM101R			0x8215
+
+#define KYOCERA_VENDOR_ID			0x0c88
+#define KYOCERA_PRODUCT_KPC650			0x17da
+#define KYOCERA_PRODUCT_KPC680			0x180a
+
+#define ANYDATA_VENDOR_ID			0x16d5
+#define ANYDATA_PRODUCT_ADU_620UW		0x6202
+#define ANYDATA_PRODUCT_ADU_E100A		0x6501
+#define ANYDATA_PRODUCT_ADU_500A		0x6502
+
+#define AXESSTEL_VENDOR_ID			0x1726
+#define AXESSTEL_PRODUCT_MV110H			0x1000
+
+#define BANDRICH_VENDOR_ID			0x1A8D
+#define BANDRICH_PRODUCT_C100_1			0x1002
+#define BANDRICH_PRODUCT_C100_2			0x1003
+#define BANDRICH_PRODUCT_1004			0x1004
+#define BANDRICH_PRODUCT_1005			0x1005
+#define BANDRICH_PRODUCT_1006			0x1006
+#define BANDRICH_PRODUCT_1007			0x1007
+#define BANDRICH_PRODUCT_1008			0x1008
+#define BANDRICH_PRODUCT_1009			0x1009
+#define BANDRICH_PRODUCT_100A			0x100a
+
+#define BANDRICH_PRODUCT_100B			0x100b
+#define BANDRICH_PRODUCT_100C			0x100c
+#define BANDRICH_PRODUCT_100D			0x100d
+#define BANDRICH_PRODUCT_100E			0x100e
+
+#define BANDRICH_PRODUCT_100F			0x100f
+#define BANDRICH_PRODUCT_1010			0x1010
+#define BANDRICH_PRODUCT_1011			0x1011
+#define BANDRICH_PRODUCT_1012			0x1012
+
+#define QUALCOMM_VENDOR_ID			0x05C6
+/* These Quectel products use Qualcomm's vendor ID */
+#define QUECTEL_PRODUCT_UC20			0x9003
+#define QUECTEL_PRODUCT_UC15			0x9090
+/* These u-blox products use Qualcomm's vendor ID */
+#define UBLOX_PRODUCT_R410M			0x90b2
+/* These Yuga products use Qualcomm's vendor ID */
+#define YUGA_PRODUCT_CLM920_NC5			0x9625
+
+#define QUECTEL_VENDOR_ID			0x2c7c
+/* These Quectel products use Quectel's vendor ID */
+#define QUECTEL_PRODUCT_EC21			0x0121
+#define QUECTEL_PRODUCT_EM061K_LTA		0x0123
+#define QUECTEL_PRODUCT_EM061K_LMS		0x0124
+#define QUECTEL_PRODUCT_EC25			0x0125
+#define QUECTEL_PRODUCT_EM060K_128		0x0128
+#define QUECTEL_PRODUCT_EG91			0x0191
+#define QUECTEL_PRODUCT_EG95			0x0195
+#define QUECTEL_PRODUCT_BG96			0x0296
+#define QUECTEL_PRODUCT_EP06			0x0306
+#define QUECTEL_PRODUCT_EM05G			0x030a
+#define QUECTEL_PRODUCT_EM060K			0x030b
+#define QUECTEL_PRODUCT_EM05G_CS		0x030c
+#define QUECTEL_PRODUCT_EM05GV2			0x030e
+#define QUECTEL_PRODUCT_EM05CN_SG		0x0310
+#define QUECTEL_PRODUCT_EM05G_SG		0x0311
+#define QUECTEL_PRODUCT_EM05CN			0x0312
+#define QUECTEL_PRODUCT_EM05G_GR		0x0313
+#define QUECTEL_PRODUCT_EM05G_RS		0x0314
+#define QUECTEL_PRODUCT_EM12			0x0512
+#define QUECTEL_PRODUCT_RM500Q			0x0800
+#define QUECTEL_PRODUCT_RM520N			0x0801
+#define QUECTEL_PRODUCT_EC200U			0x0901
+#define QUECTEL_PRODUCT_EG912Y			0x6001
+#define QUECTEL_PRODUCT_EC200S_CN		0x6002
+#define QUECTEL_PRODUCT_EC200A			0x6005
+#define QUECTEL_PRODUCT_EM061K_LWW		0x6008
+#define QUECTEL_PRODUCT_EM061K_LCN		0x6009
+#define QUECTEL_PRODUCT_EC200T			0x6026
+#define QUECTEL_PRODUCT_RM500K			0x7001
+
+#define CMOTECH_VENDOR_ID			0x16d8
+#define CMOTECH_PRODUCT_6001			0x6001
+#define CMOTECH_PRODUCT_CMU_300			0x6002
+#define CMOTECH_PRODUCT_6003			0x6003
+#define CMOTECH_PRODUCT_6004			0x6004
+#define CMOTECH_PRODUCT_6005			0x6005
+#define CMOTECH_PRODUCT_CGU_628A		0x6006
+#define CMOTECH_PRODUCT_CHE_628S		0x6007
+#define CMOTECH_PRODUCT_CMU_301			0x6008
+#define CMOTECH_PRODUCT_CHU_628			0x6280
+#define CMOTECH_PRODUCT_CHU_628S		0x6281
+#define CMOTECH_PRODUCT_CDU_680			0x6803
+#define CMOTECH_PRODUCT_CDU_685A		0x6804
+#define CMOTECH_PRODUCT_CHU_720S		0x7001
+#define CMOTECH_PRODUCT_7002			0x7002
+#define CMOTECH_PRODUCT_CHU_629K		0x7003
+#define CMOTECH_PRODUCT_7004			0x7004
+#define CMOTECH_PRODUCT_7005			0x7005
+#define CMOTECH_PRODUCT_CGU_629			0x7006
+#define CMOTECH_PRODUCT_CHU_629S		0x700a
+#define CMOTECH_PRODUCT_CHU_720I		0x7211
+#define CMOTECH_PRODUCT_7212			0x7212
+#define CMOTECH_PRODUCT_7213			0x7213
+#define CMOTECH_PRODUCT_7251			0x7251
+#define CMOTECH_PRODUCT_7252			0x7252
+#define CMOTECH_PRODUCT_7253			0x7253
+
+#define TELIT_VENDOR_ID				0x1bc7
+#define TELIT_PRODUCT_UC864E			0x1003
+#define TELIT_PRODUCT_UC864G			0x1004
+#define TELIT_PRODUCT_CC864_DUAL		0x1005
+#define TELIT_PRODUCT_CC864_SINGLE		0x1006
+#define TELIT_PRODUCT_DE910_DUAL		0x1010
+#define TELIT_PRODUCT_UE910_V2			0x1012
+#define TELIT_PRODUCT_LE922_USBCFG1		0x1040
+#define TELIT_PRODUCT_LE922_USBCFG2		0x1041
+#define TELIT_PRODUCT_LE922_USBCFG0		0x1042
+#define TELIT_PRODUCT_LE922_USBCFG3		0x1043
+#define TELIT_PRODUCT_LE922_USBCFG5		0x1045
+#define TELIT_PRODUCT_ME910			0x1100
+#define TELIT_PRODUCT_ME910_DUAL_MODEM		0x1101
+#define TELIT_PRODUCT_LE920			0x1200
+#define TELIT_PRODUCT_LE910			0x1201
+#define TELIT_PRODUCT_LE910_USBCFG4		0x1206
+#define TELIT_PRODUCT_LE920A4_1207		0x1207
+#define TELIT_PRODUCT_LE920A4_1208		0x1208
+#define TELIT_PRODUCT_LE920A4_1211		0x1211
+#define TELIT_PRODUCT_LE920A4_1212		0x1212
+#define TELIT_PRODUCT_LE920A4_1213		0x1213
+#define TELIT_PRODUCT_LE920A4_1214		0x1214
+
+/* ZTE PRODUCTS */
+#define ZTE_VENDOR_ID				0x19d2
+#define ZTE_PRODUCT_MF622			0x0001
+#define ZTE_PRODUCT_MF628			0x0015
+#define ZTE_PRODUCT_MF626			0x0031
+#define ZTE_PRODUCT_ZM8620_X			0x0396
+#define ZTE_PRODUCT_ME3620_MBIM			0x0426
+#define ZTE_PRODUCT_ME3620_X			0x1432
+#define ZTE_PRODUCT_ME3620_L			0x1433
+#define ZTE_PRODUCT_AC2726			0xfff1
+#define ZTE_PRODUCT_MG880			0xfffd
+#define ZTE_PRODUCT_CDMA_TECH			0xfffe
+#define ZTE_PRODUCT_AC8710T			0xffff
+#define ZTE_PRODUCT_MC2718			0xffe8
+#define ZTE_PRODUCT_AD3812			0xffeb
+#define ZTE_PRODUCT_MC2716			0xffed
+
+#define BENQ_VENDOR_ID				0x04a5
+#define BENQ_PRODUCT_H10			0x4068
+
+#define DLINK_VENDOR_ID				0x1186
+#define DLINK_PRODUCT_DWM_652			0x3e04
+#define DLINK_PRODUCT_DWM_652_U5		0xce16
+#define DLINK_PRODUCT_DWM_652_U5A		0xce1e
+
+#define QISDA_VENDOR_ID				0x1da5
+#define QISDA_PRODUCT_H21_4512			0x4512
+#define QISDA_PRODUCT_H21_4523			0x4523
+#define QISDA_PRODUCT_H20_4515			0x4515
+#define QISDA_PRODUCT_H20_4518			0x4518
+#define QISDA_PRODUCT_H20_4519			0x4519
+
+/* TLAYTECH PRODUCTS */
+#define TLAYTECH_VENDOR_ID			0x20B9
+#define TLAYTECH_PRODUCT_TEU800			0x1682
+
+/* TOSHIBA PRODUCTS */
+#define TOSHIBA_VENDOR_ID			0x0930
+#define TOSHIBA_PRODUCT_HSDPA_MINICARD		0x1302
+#define TOSHIBA_PRODUCT_G450			0x0d45
+
+#define ALINK_VENDOR_ID				0x1e0e
+#define SIMCOM_PRODUCT_SIM7100E			0x9001 /* Yes, ALINK_VENDOR_ID */
+#define ALINK_PRODUCT_PH300			0x9100
+#define ALINK_PRODUCT_3GU			0x9200
+
+/* ALCATEL PRODUCTS */
+#define ALCATEL_VENDOR_ID			0x1bbb
+#define ALCATEL_PRODUCT_X060S_X200		0x0000
+#define ALCATEL_PRODUCT_X220_X500D		0x0017
+#define ALCATEL_PRODUCT_L100V			0x011e
+#define ALCATEL_PRODUCT_L800MA			0x0203
+
+#define PIRELLI_VENDOR_ID			0x1266
+#define PIRELLI_PRODUCT_C100_1			0x1002
+#define PIRELLI_PRODUCT_C100_2			0x1003
+#define PIRELLI_PRODUCT_1004			0x1004
+#define PIRELLI_PRODUCT_1005			0x1005
+#define PIRELLI_PRODUCT_1006			0x1006
+#define PIRELLI_PRODUCT_1007			0x1007
+#define PIRELLI_PRODUCT_1008			0x1008
+#define PIRELLI_PRODUCT_1009			0x1009
+#define PIRELLI_PRODUCT_100A			0x100a
+#define PIRELLI_PRODUCT_100B			0x100b
+#define PIRELLI_PRODUCT_100C			0x100c
+#define PIRELLI_PRODUCT_100D			0x100d
+#define PIRELLI_PRODUCT_100E			0x100e
+#define PIRELLI_PRODUCT_100F			0x100f
+#define PIRELLI_PRODUCT_1011			0x1011
+#define PIRELLI_PRODUCT_1012			0x1012
+
+/* Airplus products */
+#define AIRPLUS_VENDOR_ID			0x1011
+#define AIRPLUS_PRODUCT_MCD650			0x3198
+
+/* Longcheer/Longsung vendor ID; makes whitelabel devices that
+ * many other vendors like 4G Systems, Alcatel, ChinaBird,
+ * Mobidata, etc sell under their own brand names.
+ */
+#define LONGCHEER_VENDOR_ID			0x1c9e
+
+/* 4G Systems products */
+/* This one was sold as the VW and Skoda "Carstick LTE" */
+#define FOUR_G_SYSTEMS_PRODUCT_CARSTICK_LTE	0x7605
+/* This is the 4G XS Stick W14 a.k.a. Mobilcom Debitel Surf-Stick *
+ * It seems to contain a Qualcomm QSC6240/6290 chipset            */
+#define FOUR_G_SYSTEMS_PRODUCT_W14		0x9603
+#define FOUR_G_SYSTEMS_PRODUCT_W100		0x9b01
+
+/* Fujisoft products */
+#define FUJISOFT_PRODUCT_FS040U			0x9b02
+
+/* iBall 3.5G connect wireless modem */
+#define IBALL_3_5G_CONNECT			0x9605
+
+/* Zoom */
+#define ZOOM_PRODUCT_4597			0x9607
+
+/* SpeedUp SU9800 usb 3g modem */
+#define SPEEDUP_PRODUCT_SU9800			0x9800
+
+/* Haier products */
+#define HAIER_VENDOR_ID				0x201e
+#define HAIER_PRODUCT_CE81B			0x10f8
+#define HAIER_PRODUCT_CE100			0x2009
+
+/* Gemalto's Cinterion products (formerly Siemens) */
+#define SIEMENS_VENDOR_ID			0x0681
+#define CINTERION_VENDOR_ID			0x1e2d
+#define CINTERION_PRODUCT_HC25_MDMNET		0x0040
+#define CINTERION_PRODUCT_HC25_MDM		0x0047
+#define CINTERION_PRODUCT_HC28_MDMNET		0x004A /* same for HC28J */
+#define CINTERION_PRODUCT_HC28_MDM		0x004C
+#define CINTERION_PRODUCT_EU3_E			0x0051
+#define CINTERION_PRODUCT_EU3_P			0x0052
+#define CINTERION_PRODUCT_PH8			0x0053
+#define CINTERION_PRODUCT_AHXX			0x0055
+#define CINTERION_PRODUCT_PLXX			0x0060
+#define CINTERION_PRODUCT_EXS82			0x006c
+#define CINTERION_PRODUCT_PH8_2RMNET		0x0082
+#define CINTERION_PRODUCT_PH8_AUDIO		0x0083
+#define CINTERION_PRODUCT_AHXX_2RMNET		0x0084
+#define CINTERION_PRODUCT_AHXX_AUDIO		0x0085
+#define CINTERION_PRODUCT_CLS8			0x00b0
+#define CINTERION_PRODUCT_MV31_MBIM		0x00b3
+#define CINTERION_PRODUCT_MV31_RMNET		0x00b7
+#define CINTERION_PRODUCT_MV31_2_MBIM		0x00b8
+#define CINTERION_PRODUCT_MV31_2_RMNET		0x00b9
+#define CINTERION_PRODUCT_MV32_WA		0x00f1
+#define CINTERION_PRODUCT_MV32_WB		0x00f2
+#define CINTERION_PRODUCT_MV32_WA_RMNET		0x00f3
+#define CINTERION_PRODUCT_MV32_WB_RMNET		0x00f4
+
+/* Olivetti products */
+#define OLIVETTI_VENDOR_ID			0x0b3c
+#define OLIVETTI_PRODUCT_OLICARD100		0xc000
+#define OLIVETTI_PRODUCT_OLICARD120		0xc001
+#define OLIVETTI_PRODUCT_OLICARD140		0xc002
+#define OLIVETTI_PRODUCT_OLICARD145		0xc003
+#define OLIVETTI_PRODUCT_OLICARD155		0xc004
+#define OLIVETTI_PRODUCT_OLICARD200		0xc005
+#define OLIVETTI_PRODUCT_OLICARD160		0xc00a
+#define OLIVETTI_PRODUCT_OLICARD500		0xc00b
+
+/* Celot products */
+#define CELOT_VENDOR_ID				0x211f
+#define CELOT_PRODUCT_CT680M			0x6801
+
+/* Samsung products */
+#define SAMSUNG_VENDOR_ID                       0x04e8
+#define SAMSUNG_PRODUCT_GT_B3730                0x6889
+
+/* YUGA products  www.yuga-info.com gavin.kx@qq.com */
+#define YUGA_VENDOR_ID				0x257A
+#define YUGA_PRODUCT_CEM600			0x1601
+#define YUGA_PRODUCT_CEM610			0x1602
+#define YUGA_PRODUCT_CEM500			0x1603
+#define YUGA_PRODUCT_CEM510			0x1604
+#define YUGA_PRODUCT_CEM800			0x1605
+#define YUGA_PRODUCT_CEM900			0x1606
+
+#define YUGA_PRODUCT_CEU818			0x1607
+#define YUGA_PRODUCT_CEU816			0x1608
+#define YUGA_PRODUCT_CEU828			0x1609
+#define YUGA_PRODUCT_CEU826			0x160A
+#define YUGA_PRODUCT_CEU518			0x160B
+#define YUGA_PRODUCT_CEU516			0x160C
+#define YUGA_PRODUCT_CEU528			0x160D
+#define YUGA_PRODUCT_CEU526			0x160F
+#define YUGA_PRODUCT_CEU881			0x161F
+#define YUGA_PRODUCT_CEU882			0x162F
+
+#define YUGA_PRODUCT_CWM600			0x2601
+#define YUGA_PRODUCT_CWM610			0x2602
+#define YUGA_PRODUCT_CWM500			0x2603
+#define YUGA_PRODUCT_CWM510			0x2604
+#define YUGA_PRODUCT_CWM800			0x2605
+#define YUGA_PRODUCT_CWM900			0x2606
+
+#define YUGA_PRODUCT_CWU718			0x2607
+#define YUGA_PRODUCT_CWU716			0x2608
+#define YUGA_PRODUCT_CWU728			0x2609
+#define YUGA_PRODUCT_CWU726			0x260A
+#define YUGA_PRODUCT_CWU518			0x260B
+#define YUGA_PRODUCT_CWU516			0x260C
+#define YUGA_PRODUCT_CWU528			0x260D
+#define YUGA_PRODUCT_CWU581			0x260E
+#define YUGA_PRODUCT_CWU526			0x260F
+#define YUGA_PRODUCT_CWU582			0x261F
+#define YUGA_PRODUCT_CWU583			0x262F
+
+#define YUGA_PRODUCT_CLM600			0x3601
+#define YUGA_PRODUCT_CLM610			0x3602
+#define YUGA_PRODUCT_CLM500			0x3603
+#define YUGA_PRODUCT_CLM510			0x3604
+#define YUGA_PRODUCT_CLM800			0x3605
+#define YUGA_PRODUCT_CLM900			0x3606
+
+#define YUGA_PRODUCT_CLU718			0x3607
+#define YUGA_PRODUCT_CLU716			0x3608
+#define YUGA_PRODUCT_CLU728			0x3609
+#define YUGA_PRODUCT_CLU726			0x360A
+#define YUGA_PRODUCT_CLU518			0x360B
+#define YUGA_PRODUCT_CLU516			0x360C
+#define YUGA_PRODUCT_CLU528			0x360D
+#define YUGA_PRODUCT_CLU526			0x360F
+
+/* Viettel products */
+#define VIETTEL_VENDOR_ID			0x2262
+#define VIETTEL_PRODUCT_VT1000			0x0002
+
+/* ZD Incorporated */
+#define ZD_VENDOR_ID				0x0685
+#define ZD_PRODUCT_7000				0x7000
+
+/* LG products */
+#define LG_VENDOR_ID				0x1004
+#define LG_PRODUCT_L02C				0x618f
+
+/* MediaTek products */
+#define MEDIATEK_VENDOR_ID			0x0e8d
+#define MEDIATEK_PRODUCT_DC_1COM		0x00a0
+#define MEDIATEK_PRODUCT_DC_4COM		0x00a5
+#define MEDIATEK_PRODUCT_DC_4COM2		0x00a7
+#define MEDIATEK_PRODUCT_DC_5COM		0x00a4
+#define MEDIATEK_PRODUCT_7208_1COM		0x7101
+#define MEDIATEK_PRODUCT_7208_2COM		0x7102
+#define MEDIATEK_PRODUCT_7103_2COM		0x7103
+#define MEDIATEK_PRODUCT_7106_2COM		0x7106
+#define MEDIATEK_PRODUCT_FP_1COM		0x0003
+#define MEDIATEK_PRODUCT_FP_2COM		0x0023
+#define MEDIATEK_PRODUCT_FPDC_1COM		0x0043
+#define MEDIATEK_PRODUCT_FPDC_2COM		0x0033
+
+/* Cellient products */
+#define CELLIENT_VENDOR_ID			0x2692
+#define CELLIENT_PRODUCT_MEN200			0x9005
+#define CELLIENT_PRODUCT_MPL200			0x9025
+
+/* Hyundai Petatel Inc. products */
+#define PETATEL_VENDOR_ID			0x1ff4
+#define PETATEL_PRODUCT_NP10T_600A		0x600a
+#define PETATEL_PRODUCT_NP10T_600E		0x600e
+
+/* TP-LINK Incorporated products */
+#define TPLINK_VENDOR_ID			0x2357
+#define TPLINK_PRODUCT_LTE			0x000D
+#define TPLINK_PRODUCT_MA180			0x0201
+
+/* Changhong products */
+#define CHANGHONG_VENDOR_ID			0x2077
+#define CHANGHONG_PRODUCT_CH690			0x7001
+
+/* Inovia */
+#define INOVIA_VENDOR_ID			0x20a6
+#define INOVIA_SEW858				0x1105
+
+/* VIA Telecom */
+#define VIATELECOM_VENDOR_ID			0x15eb
+#define VIATELECOM_PRODUCT_CDS7			0x0001
+
+/* WeTelecom products */
+#define WETELECOM_VENDOR_ID			0x22de
+#define WETELECOM_PRODUCT_WMD200		0x6801
+#define WETELECOM_PRODUCT_6802			0x6802
+#define WETELECOM_PRODUCT_WMD300		0x6803
+
+/* OPPO products */
+#define OPPO_VENDOR_ID				0x22d9
+#define OPPO_PRODUCT_R11			0x276c
+
+/* Sierra Wireless products */
+#define SIERRA_VENDOR_ID			0x1199
+#define SIERRA_PRODUCT_EM9191			0x90d3
+
+/* UNISOC (Spreadtrum) products */
+#define UNISOC_VENDOR_ID			0x1782
+/* TOZED LT70-C based on UNISOC SL8563 uses UNISOC's vendor ID */
+#define TOZED_PRODUCT_LT70C			0x4055
+/* Luat Air72*U series based on UNISOC UIS8910 uses UNISOC's vendor ID */
+#define LUAT_PRODUCT_AIR720U			0x4e00
+
+/* Device flags */
+
+/* Highest interface number which can be used with NCTRL() and RSVD() */
+#define FLAG_IFNUM_MAX	7
+
+/* Interface does not support modem-control requests */
+#define NCTRL(ifnum)	((BIT(ifnum) & 0xff) << 8)
+
+/* Interface is reserved */
+#define RSVD(ifnum)	((BIT(ifnum) & 0xff) << 0)
+
+/* Interface must have two endpoints */
+#define NUMEP2		BIT(16)
+
+/* Device needs ZLP */
+#define ZLP		BIT(17)
+
+
+static const struct usb_device_id option_ids[] = {
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_LIGHT) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_QUAD) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_QUAD_LIGHT) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_LIGHT) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_QUAD) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_QUAD_LIGHT) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA_BUS) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER_BUS) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GT_MAX_READY) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_LIGHT) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_GT) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_EX) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_KOI_MODEM) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_SCORPION_MODEM) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_LITE) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTM380_MODEM) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, 0xea42),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c1f, USB_CLASS_COMM, 0x02, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(1) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S6, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(1) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1750, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(2) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1441, USB_CLASS_COMM, 0x02, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1442, USB_CLASS_COMM, 0x02, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff),	/* Huawei E1820 */
+	  .driver_info = RSVD(1) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(1) | RSVD(2) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x02) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x03) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x04) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x05) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x06) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x10) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x12) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x13) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x14) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x15) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x17) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x18) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x19) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x31) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x32) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x33) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x34) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x35) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x36) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x48) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x49) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x61) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x62) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x63) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x64) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x65) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x66) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x72) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x73) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x74) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x75) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x78) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x79) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x02) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x03) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x04) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x05) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x06) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x10) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x12) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x13) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x14) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x15) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x17) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x18) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x19) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x31) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x32) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x33) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x34) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x35) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x36) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x48) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x49) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x61) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x62) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x63) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x64) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x65) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x66) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x72) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x73) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x74) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x75) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x78) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x79) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x02) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x03) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x04) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x05) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x06) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x10) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x12) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x13) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x14) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x15) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x17) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x18) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x19) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x1A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x1B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x1C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x31) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x32) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x33) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x34) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x35) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x36) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x48) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x49) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x4A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x4B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x4C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x61) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x62) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x63) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x64) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x65) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x66) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x72) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x73) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x74) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x75) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x78) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x79) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x02) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x03) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x04) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x05) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x06) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x10) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x12) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x13) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x14) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x15) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x17) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x18) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x19) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x1A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x1B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x1C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x31) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x32) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x33) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x34) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x35) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x36) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x48) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x49) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x4A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x4B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x4C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x61) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x62) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x63) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x64) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x65) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x66) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x72) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x73) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x74) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x75) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x78) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x79) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x02) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x03) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x04) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x05) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x06) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x10) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x12) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x13) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x14) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x15) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x17) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x18) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x19) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x1A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x1B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x1C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x31) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x32) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x33) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x34) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x35) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x36) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x48) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x49) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x4A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x4B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x4C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x61) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x62) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x63) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x64) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x65) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x66) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x72) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x73) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x74) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x75) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x78) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x79) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x02) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x03) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x04) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x05) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x06) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x10) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x12) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x13) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x14) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x15) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x17) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x18) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x19) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x1A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x1B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x1C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x31) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x32) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x33) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x34) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x35) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x36) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x48) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x49) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x4A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x4B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x4C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x61) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x62) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x63) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x64) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x65) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x66) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x72) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x73) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x74) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x75) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x78) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x79) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7C) },
+
+	/* Motorola devices */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x2a70, 0xff, 0xff, 0xff) },	/* mdm6600 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x2e0a, 0xff, 0xff, 0xff) },	/* mdm9600 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x4281, 0x0a, 0x00, 0xfc) },	/* mdm ram dl */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x900e, 0xff, 0xff, 0xff) },	/* mdm qc dl */
+
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V720) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U730) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U740) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U870) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_XU870) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_X950D) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EV620) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES720) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E725) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES620) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU730) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU740) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_OVMC760) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC780) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED3) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED4) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED5) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED6) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED7) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC996D) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MF3470) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC547) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
+	/* Novatel Ovation MC551 a.k.a. Verizon USB551L */
+	{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E371, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U620L, 0xff, 0x00, 0x00) },
+
+	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
+	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
+	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) },
+	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_SKYPEPHONE_S2) },
+
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD) },		/* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5500_MINICARD) },		/* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5505_MINICARD) },		/* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_EXPRESSCARD) },		/* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5510_EXPRESSCARD) },		/* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD_SPRINT) },	/* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD_TELUS) },	/* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite ET620 CDMA/EV-DO */
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_VZW) }, 	/* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_SPRINT) }, 	/* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_TELUS) }, 	/* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_CINGULAR) },	/* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_L) },	/* Dell Wireless HSDPA 5520 */
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_I) },	/* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) },	/* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) },	/* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, 	/* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
+	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E),
+	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E_ESIM),
+	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5829E),
+	  .driver_info = RSVD(0) | RSVD(6) },
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5829E_ESIM),
+	  .driver_info = RSVD(0) | RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(DELL_VENDOR_ID, DELL_PRODUCT_FM101R, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(DELL_VENDOR_ID, DELL_PRODUCT_FM101R_ESIM, 0xff) },
+	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },	/* ADU-E100, ADU-310 */
+	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
+	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
+	{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
+	{ USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1005, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1006, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1007, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1008, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1009, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100A, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100B, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100C, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100D, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100E, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100F, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1010, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1011, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) },
+	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
+	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUALCOMM_VENDOR_ID, 0x6001, 0xff, 0xff, 0xff), /* 4G LTE usb-modem U901 */
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000), /* SIMCom SIM5218 */
+	  .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) | NCTRL(3) | RSVD(4) },
+	/* Quectel products using Qualcomm vendor ID */
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)},
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20),
+	  .driver_info = RSVD(4) },
+	/* Yuga products use Qualcomm vendor ID */
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, YUGA_PRODUCT_CLM920_NC5),
+	  .driver_info = RSVD(1) | RSVD(4) },
+	/* u-blox products using Qualcomm vendor ID */
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M),
+	  .driver_info = RSVD(1) | RSVD(3) },
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x908b),	/* u-blox LARA-R6 00B */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x90fa),
+	  .driver_info = RSVD(3) },
+	/* u-blox products */
+	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1311) },	/* u-blox LARA-R6 01B */
+	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1312),		/* u-blox LARA-R6 01B (RMNET) */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(UBLOX_VENDOR_ID, 0x1313, 0xff) },	/* u-blox LARA-R6 01B (ECM) */
+	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1341) },	/* u-blox LARA-L6 */
+	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1342),		/* u-blox LARA-L6 (RMNET) */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1343),		/* u-blox LARA-L6 (ECM) */
+	  .driver_info = RSVD(4) },
+	/* Quectel products using Quectel vendor ID */
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff),
+	  .driver_info = NUMEP2 },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0xff, 0xff),
+	  .driver_info = NUMEP2 },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG91, 0xff, 0xff, 0xff),
+	  .driver_info = NUMEP2 },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG91, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff),
+	  .driver_info = NUMEP2 },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0203, 0xff), /* BG95-M3 */
+	  .driver_info = ZLP },
+	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05CN, 0xff),
+	  .driver_info = RSVD(6) | ZLP },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05CN_SG, 0xff),
+	  .driver_info = RSVD(6) | ZLP },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff),
+	  .driver_info = RSVD(6) | ZLP },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_GR, 0xff),
+	  .driver_info = RSVD(6) | ZLP },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05GV2, 0xff),
+	  .driver_info = RSVD(4) | ZLP },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_CS, 0xff),
+	  .driver_info = RSVD(6) | ZLP },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_RS, 0xff),
+	  .driver_info = RSVD(6) | ZLP },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_SG, 0xff),
+	  .driver_info = RSVD(6) | ZLP },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LMS, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LMS, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LMS, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LTA, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LTA, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LTA, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LWW, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LWW, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LWW, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0xff, 0x30) },	/* EM160R-GL */
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0, 0) },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0700, 0xff), /* BG95 */
+	  .driver_info = RSVD(3) | ZLP },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),
+	  .driver_info = ZLP },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0900, 0xff, 0, 0), /* RM500U-CN */
+	  .driver_info = ZLP },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200A, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200U, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG912Y, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) },
+
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
+	  .driver_info = RSVD(0) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6004) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6005) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_628A) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHE_628S),
+	  .driver_info = RSVD(0) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_301),
+	  .driver_info = RSVD(0) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628),
+	  .driver_info = RSVD(0) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628S) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_680) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_685A) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720S),
+	  .driver_info = RSVD(0) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7002),
+	  .driver_info = RSVD(0) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629K),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7004),
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7005) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_629),
+	  .driver_info = RSVD(5) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629S),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720I),
+	  .driver_info = RSVD(0) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7212),
+	  .driver_info = RSVD(0) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7213),
+	  .driver_info = RSVD(0) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7251),
+	  .driver_info = RSVD(1) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7252),
+	  .driver_info = RSVD(1) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7253),
+	  .driver_info = RSVD(1) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1031, 0xff),	/* Telit LE910C1-EUX */
+	 .driver_info = NCTRL(0) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1033, 0xff),	/* Telit LE910C1-EUX (ECM) */
+	 .driver_info = NCTRL(0) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1035, 0xff) }, /* Telit LE910C4-WWX (ECM) */
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0),
+	  .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG1),
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG2),
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3),
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
+	  .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1050, 0xff),	/* Telit FN980 (rmnet) */
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1051, 0xff),	/* Telit FN980 (MBIM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1052, 0xff),	/* Telit FN980 (RNDIS) */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1053, 0xff),	/* Telit FN980 (ECM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1054, 0xff),	/* Telit FT980-KS */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1055, 0xff),	/* Telit FN980 (PCIe) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1056, 0xff),	/* Telit FD980 */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1057, 0xff),	/* Telit FN980 */
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1058, 0xff),	/* Telit FN980 (PCIe) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1060, 0xff),	/* Telit LN920 (rmnet) */
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1061, 0xff),	/* Telit LN920 (MBIM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1062, 0xff),	/* Telit LN920 (RNDIS) */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1063, 0xff),	/* Telit LN920 (ECM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1070, 0xff),	/* Telit FN990 (rmnet) */
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1071, 0xff),	/* Telit FN990 (MBIM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1072, 0xff),	/* Telit FN990 (RNDIS) */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff),	/* Telit FN990 (ECM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff),	/* Telit FN990 (PCIe) */
+	  .driver_info = RSVD(0) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff),	/* Telit FE990 (rmnet) */
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff),	/* Telit FE990 (MBIM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff),	/* Telit FE990 (RNDIS) */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff),	/* Telit FE990 (ECM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
+	  .driver_info = NCTRL(0) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1102, 0xff),	/* Telit ME910 (ECM) */
+	  .driver_info = NCTRL(0) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x110a, 0xff),	/* Telit ME910G1 */
+	  .driver_info = NCTRL(0) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x110b, 0xff),	/* Telit ME910G1 (ECM) */
+	  .driver_info = NCTRL(0) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1203, 0xff),	/* Telit LE910Cx (RNDIS) */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1204, 0xff),	/* Telit LE910Cx (MBIM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(5) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1207) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1208),
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1211),
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1212),
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214),
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1230, 0xff),	/* Telit LE910Cx (rmnet) */
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1231, 0xff),	/* Telit LE910Cx (RNDIS) */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x1250, 0xff, 0x00, 0x00) },	/* Telit LE910Cx (rmnet) */
+	{ USB_DEVICE(TELIT_VENDOR_ID, 0x1260),
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, 0x1261),
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, 0x1900),				/* Telit LN940 (QMI) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff),	/* Telit LN940 (MBIM) */
+	  .driver_info = NCTRL(0) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7010, 0xff),	/* Telit LE910-S1 (RNDIS) */
+	  .driver_info = NCTRL(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7011, 0xff),	/* Telit LE910-S1 (ECM) */
+	  .driver_info = NCTRL(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x701a, 0xff),	/* Telit LE910R1 (RNDIS) */
+	  .driver_info = NCTRL(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x701b, 0xff),	/* Telit LE910R1 (ECM) */
+	  .driver_info = NCTRL(2) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, 0x9010),				/* Telit SBL FN980 flashing device */
+	  .driver_info = NCTRL(0) | ZLP },
+	{ USB_DEVICE(TELIT_VENDOR_ID, 0x9200),				/* Telit LE910S1 flashing device */
+	  .driver_info = NCTRL(0) | ZLP },
+	{ USB_DEVICE(TELIT_VENDOR_ID, 0x9201),				/* Telit LE910R1 flashing device */
+	  .driver_info = NCTRL(0) | ZLP },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(1) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0006, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0008, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0009, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000a, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000b, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000c, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000d, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000e, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000f, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0010, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0011, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(1) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0022, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0023, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(1) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, 0xff, 0xff),
+	  .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0034, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff),
+	  .driver_info = NCTRL(0) | NCTRL(1) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0038, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0040, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0043, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0044, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0048, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(5) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0050, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(1) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0056, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0064, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0065, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0067, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0077, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0079, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0082, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0083, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0087, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0088, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0089, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0090, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0091, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0092, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0093, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0095, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0106, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0108, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(5) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0117, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(5) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(5) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0122, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0123, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0124, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(5) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0125, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(6) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(5) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0135, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0136, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0137, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0139, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0142, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0145, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0148, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0151, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(5) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0196, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0197, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */
+	  .driver_info = RSVD(1) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0200, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0201, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff), /* ONDA MT8205 */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0412, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x0601, 0xff) },	/* GosunCn ZTE WeLink ME3630 (RNDIS mode) */
+	{ USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x0602, 0xff) },	/* GosunCn ZTE WeLink ME3630 (MBIM mode) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(2) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1060, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1061, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1062, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1063, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1064, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1065, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1066, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1067, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1068, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1069, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1070, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1071, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1072, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1073, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1074, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1075, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1076, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1077, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1078, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1079, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1080, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1081, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1082, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1083, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1084, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1085, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1086, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1087, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1088, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1089, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1090, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1091, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1092, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1093, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1094, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1095, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1096, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1097, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1098, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1099, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1100, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1101, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1102, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1103, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1104, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1105, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1106, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1107, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1108, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1109, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1110, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1111, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1112, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1113, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1114, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1115, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1116, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1117, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1118, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1119, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1120, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1121, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1122, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1123, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1124, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1125, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1126, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1127, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1128, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1129, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1130, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1131, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1132, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1133, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1134, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1135, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1136, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1137, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1138, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1139, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1140, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1141, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1142, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1143, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1144, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1145, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1146, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1147, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1148, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1149, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1150, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1151, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1152, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1153, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1154, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1155, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1156, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1157, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1158, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1159, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1160, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1161, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1162, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1163, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1164, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1165, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1166, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1167, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1168, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1169, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1170, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1244, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1246, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1248, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1249, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1250, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1251, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1253, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(3) | RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1257, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1258, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1259, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1260, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1261, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1262, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1263, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1264, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1265, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1266, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1267, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1268, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1269, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(5) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1271, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1272, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1273, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1274, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(ZTE_VENDOR_ID, 0x1275),	/* ZTE P685M */
+	  .driver_info = RSVD(3) | RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1276, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1277, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1278, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1279, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1280, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1281, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1282, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1283, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1284, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1285, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1286, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1287, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1288, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1289, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1290, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1291, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1292, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1293, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1294, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1295, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1296, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1297, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1301, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1302, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1303, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1333, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(2) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(2) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(2) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(2) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff),  /* ZTE MF91 */
+	  .driver_info = RSVD(2) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff),  /* Telewell TW-LTE 4G v2 */
+	  .driver_info = RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1476, 0xff) },	/* GosunCn ZTE WeLink ME3630 (ECM/NCM mode) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1481, 0xff, 0x00, 0x00) }, /* ZTE MF871A */
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1485, 0xff, 0xff, 0xff),  /* ZTE MF286D */
+	  .driver_info = RSVD(5) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1545, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1546, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1547, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1565, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1566, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1567, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1589, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1590, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1591, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1592, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1594, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1596, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1598, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1600, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff),
+	  .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) | RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(1) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(5) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff42, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff43, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff44, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff45, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff46, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff47, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff48, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff49, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4a, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4b, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4c, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4d, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4e, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4f, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff50, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff51, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff52, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff53, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff54, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff55, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff56, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff57, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff58, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff59, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5a, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5b, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5c, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5d, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5e, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5f, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff60, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff61, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff62, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff63, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff64, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff65, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff66, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff67, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff68, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff69, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6a, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6b, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6c, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6d, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6e, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6f, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff70, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff71, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff72, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff73, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff74, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff75, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff76, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff77, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff78, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff79, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7a, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7b, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7c, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7d, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7e, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7f, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff80, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff81, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff82, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff83, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff84, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff85, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff86, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff87, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff88, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff89, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8a, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8b, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8c, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8d, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8e, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8f, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff90, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff91, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff92, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff9f, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa0, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa1, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa2, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa3, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa4, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa5, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa6, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa7, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa8, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa9, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffaa, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffab, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffac, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffae, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffaf, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb0, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb1, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb2, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb3, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb4, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb5, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb6, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb7, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb8, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb9, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffba, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbb, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbc, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbd, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbe, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbf, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc0, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc1, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc2, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc3, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc4, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc5, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc6, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc7, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc8, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc9, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffca, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcb, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcc, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcd, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffce, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcf, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd0, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd1, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd2, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd3, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd4, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd5, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffe9, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffec, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffee, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff6, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff7, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff8, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff9, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffb, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffc, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MG880, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
+	 .driver_info = NCTRL(1) | NCTRL(2) | NCTRL(3) | NCTRL(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
+	 .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
+	 .driver_info = NCTRL(1) | NCTRL(2) | NCTRL(3) },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_L),
+	 .driver_info = RSVD(3) | RSVD(4) | RSVD(5) },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_MBIM),
+	 .driver_info = RSVD(2) | RSVD(3) | RSVD(4) },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_X),
+	 .driver_info = RSVD(3) | RSVD(4) | RSVD(5) },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ZM8620_X),
+	 .driver_info = RSVD(3) | RSVD(4) | RSVD(5) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
+
+	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
+	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
+	{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
+	{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5A) },
+	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
+	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
+	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
+	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4518) },
+	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
+	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) },
+	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
+	{ USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
+	{ USB_DEVICE(ALINK_VENDOR_ID, ALINK_PRODUCT_PH300) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E),
+	  .driver_info = RSVD(5) | RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) },	/* Simcom SIM7500/SIM7600 MBIM mode */
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff),	/* Simcom SIM7500/SIM7600 RNDIS mode */
+	  .driver_info = RSVD(7) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9205, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT+ECM mode */
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9206, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT-only mode */
+	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
+	  .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
+	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),
+	  .driver_info = RSVD(6) },
+	{ USB_DEVICE(ALCATEL_VENDOR_ID, 0x0052),
+	  .driver_info = RSVD(6) },
+	{ USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b6),
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b7),
+	  .driver_info = RSVD(5) },
+	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L800MA),
+	  .driver_info = RSVD(2) },
+	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
+	{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
+	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_CARSTICK_LTE),
+	  .driver_info = RSVD(0) },
+	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
+	  .driver_info = NCTRL(0) | NCTRL(1) },
+	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W100),
+	  .driver_info = NCTRL(1) | NCTRL(2) | RSVD(3) },
+	{USB_DEVICE(LONGCHEER_VENDOR_ID, FUJISOFT_PRODUCT_FS040U),
+	 .driver_info = RSVD(3)},
+	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, SPEEDUP_PRODUCT_SU9800, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9801, 0xff),
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9803, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
+	{ USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
+	{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HAIER_VENDOR_ID, HAIER_PRODUCT_CE81B, 0xff, 0xff, 0xff) },
+	/* Pirelli  */
+	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_2, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1004, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1005, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1006, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1007, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1008, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1009, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100A, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100B, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100C, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100D, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100E, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012, 0xff) },
+	/* Cinterion */
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX, 0xff) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_2RMNET, 0xff),
+	  .driver_info = RSVD(4) | RSVD(5) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_AUDIO, 0xff),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_2RMNET, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_CLS8, 0xff),
+	  .driver_info = RSVD(0) | RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EXS82, 0xff) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_MBIM, 0xff),
+	  .driver_info = RSVD(3)},
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_RMNET, 0xff),
+	  .driver_info = RSVD(0)},
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_2_MBIM, 0xff),
+	  .driver_info = RSVD(3)},
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_2_RMNET, 0xff),
+	  .driver_info = RSVD(0)},
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA, 0xff),
+	  .driver_info = RSVD(3)},
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA_RMNET, 0xff),
+	  .driver_info = RSVD(0) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB, 0xff),
+	  .driver_info = RSVD(3)},
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB_RMNET, 0xff),
+	  .driver_info = RSVD(0) },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD140),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD155),
+	  .driver_info = RSVD(6) },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200),
+	  .driver_info = RSVD(6) },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD160),
+	  .driver_info = RSVD(6) },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD500),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
+	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM610) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM500) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM510) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM800) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM900) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU818) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU816) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU828) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU826) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU518) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU516) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU528) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU526) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM600) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM610) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM500) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM510) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM800) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM900) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU718) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU716) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU728) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU726) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU518) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU516) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU528) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU526) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM600) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM610) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM500) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM510) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM800) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM900) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU718) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU716) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU728) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU726) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU518) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU881) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU882) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU581) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU582) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU583) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) },        /* MediaTek MT6276M modem & app port */
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_1COM, 0x0a, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_1COM, 0x02, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_2COM, 0x02, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_1COM, 0x0a, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7103_2COM, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7106_2COM, 0x02, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
+	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MPL200),
+	  .driver_info = RSVD(1) | RSVD(4) },
+	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600A) },
+	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, TPLINK_PRODUCT_LTE, 0xff, 0x00, 0x00) },	/* TP-Link LTE Module */
+	{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(TPLINK_VENDOR_ID, 0x9000),					/* TP-Link MA260 */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d01, 0xff) },			/* D-Link DWM-156 (variant) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d02, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d03, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff),			/* D-Link DWM-158 */
+	 .driver_info = RSVD(4) | RSVD(5) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d0e, 0xff) },			/* D-Link DWM-157 C1 */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff),			/* D-Link DWM-221 B1 */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e35, 0xff),			/* D-Link DWM-222 */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e3d, 0xff),			/* D-Link DWM-222 A2 */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) },	/* D-Link DWM-152/C1 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) },	/* D-Link DWM-156/C1 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) },	/* D-Link DWM-156/A3 */
+	{ USB_DEVICE_INTERFACE_CLASS(0x1435, 0xd191, 0xff),			/* Wistron Neweb D19Q1 */
+	  .driver_info = RSVD(1) | RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1690, 0x7588, 0xff),			/* ASKEY WWHC050 */
+	  .driver_info = RSVD(1) | RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff),			/* Olicard 600 */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2033, 0xff),			/* BroadMobi BM806U */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2060, 0xff),			/* BroadMobi BM818 */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) },			/* OLICARD300 - MT6225 */
+	{ USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
+	{ USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) },	/* HP lt2523 (Novatel E371) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x10) },	/* HP lt4132 (Huawei ME906s-158) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x12) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) },
+	{ USB_DEVICE(0x0489, 0xe0b4),						/* Foxconn T77W968 */
+	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+	{ USB_DEVICE(0x0489, 0xe0b5),						/* Foxconn T77W968 ESIM */
+	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0da, 0xff),                     /* Foxconn T99W265 MBIM variant */
+	  .driver_info = RSVD(3) | RSVD(5) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff),			/* Foxconn T99W265 MBIM */
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0ee, 0xff),			/* Foxconn T99W368 MBIM */
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0f0, 0xff),			/* Foxconn T99W373 MBIM */
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 (IOT version) */
+	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
+	{ USB_DEVICE(0x1782, 0x4d10) },						/* Fibocom L610 (AT mode) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x1782, 0x4d11, 0xff) },			/* Fibocom L610 (ECM/RNDIS mode) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x0001, 0xff, 0xff, 0xff) },	/* Fibocom L716-EU (ECM/RNDIS mode) */
+	{ USB_DEVICE(0x2cb7, 0x0104),						/* Fibocom NL678 series */
+	  .driver_info = RSVD(4) | RSVD(5) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff),			/* Fibocom NL678 series */
+	  .driver_info = RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0106, 0xff) },			/* Fibocom MA510 (ECM mode w/ diag intf.) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x010a, 0xff) },			/* Fibocom MA510 (ECM mode) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) },	/* Fibocom FG150 Diag */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) },		/* Fibocom FG150 AT */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0111, 0xff) },			/* Fibocom FM160 (MBIM mode) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) },			/* Fibocom FM101-GL (laptop MBIM) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff),			/* Fibocom FM101-GL (laptop MBIM) */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */
+	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
+	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
+	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) },			/* GosunCn GM500 ECM/NCM */
+	{ USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) },
+	{ } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, option_ids);
+
+/* The card has three separate interfaces, which the serial driver
+ * recognizes separately, thus num_port=1.
+ */
+
+static struct usb_serial_driver option_1port_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"option1",
+	},
+	.description       = "GSM modem (1-port)",
+	.id_table          = option_ids,
+	.num_ports         = 1,
+	.probe             = option_probe,
+	.open              = usb_wwan_open,
+	.close             = usb_wwan_close,
+	.dtr_rts	   = usb_wwan_dtr_rts,
+	.write             = usb_wwan_write,
+	.write_room        = usb_wwan_write_room,
+	.chars_in_buffer   = usb_wwan_chars_in_buffer,
+	.tiocmget          = usb_wwan_tiocmget,
+	.tiocmset          = usb_wwan_tiocmset,
+	.attach            = option_attach,
+	.release           = option_release,
+	.port_probe        = usb_wwan_port_probe,
+	.port_remove	   = usb_wwan_port_remove,
+	.read_int_callback = option_instat_callback,
+#ifdef CONFIG_PM
+	.suspend           = usb_wwan_suspend,
+	.resume            = usb_wwan_resume,
+#endif
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&option_1port_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, option_ids);
+
+static bool iface_is_reserved(unsigned long device_flags, u8 ifnum)
+{
+	if (ifnum > FLAG_IFNUM_MAX)
+		return false;
+
+	return device_flags & RSVD(ifnum);
+}
+
+static int option_probe(struct usb_serial *serial,
+			const struct usb_device_id *id)
+{
+	struct usb_interface_descriptor *iface_desc =
+				&serial->interface->cur_altsetting->desc;
+	unsigned long device_flags = id->driver_info;
+
+	/* Never bind to the CD-Rom emulation interface	*/
+	if (iface_desc->bInterfaceClass == USB_CLASS_MASS_STORAGE)
+		return -ENODEV;
+
+	/*
+	 * Don't bind reserved interfaces (like network ones) which often have
+	 * the same class/subclass/protocol as the serial interfaces.  Look at
+	 * the Windows driver .INF files for reserved interface numbers.
+	 */
+	if (iface_is_reserved(device_flags, iface_desc->bInterfaceNumber))
+		return -ENODEV;
+
+	/*
+	 * Allow matching on bNumEndpoints for devices whose interface numbers
+	 * can change (e.g. Quectel EP06).
+	 */
+	if (device_flags & NUMEP2 && iface_desc->bNumEndpoints != 2)
+		return -ENODEV;
+
+	/* Store the device flags so we can use them during attach. */
+	usb_set_serial_data(serial, (void *)device_flags);
+
+	return 0;
+}
+
+static bool iface_no_modem_control(unsigned long device_flags, u8 ifnum)
+{
+	if (ifnum > FLAG_IFNUM_MAX)
+		return false;
+
+	return device_flags & NCTRL(ifnum);
+}
+
+static int option_attach(struct usb_serial *serial)
+{
+	struct usb_interface_descriptor *iface_desc;
+	struct usb_wwan_intf_private *data;
+	unsigned long device_flags;
+
+	data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	/* Retrieve device flags stored at probe. */
+	device_flags = (unsigned long)usb_get_serial_data(serial);
+
+	iface_desc = &serial->interface->cur_altsetting->desc;
+
+	if (!iface_no_modem_control(device_flags, iface_desc->bInterfaceNumber))
+		data->use_send_setup = 1;
+
+	if (device_flags & ZLP)
+		data->use_zlp = 1;
+
+	spin_lock_init(&data->susp_lock);
+
+	usb_set_serial_data(serial, data);
+
+	return 0;
+}
+
+static void option_release(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial);
+
+	kfree(intfdata);
+}
+
+static void option_instat_callback(struct urb *urb)
+{
+	int err;
+	int status = urb->status;
+	struct usb_serial_port *port = urb->context;
+	struct device *dev = &port->dev;
+	struct usb_wwan_port_private *portdata =
+					usb_get_serial_port_data(port);
+
+	dev_dbg(dev, "%s: urb %p port %p has data %p\n", __func__, urb, port, portdata);
+
+	if (status == 0) {
+		struct usb_ctrlrequest *req_pkt = urb->transfer_buffer;
+
+		if (!req_pkt) {
+			dev_dbg(dev, "%s: NULL req_pkt\n", __func__);
+			return;
+		}
+		if ((req_pkt->bRequestType == 0xA1) &&
+				(req_pkt->bRequest == 0x20)) {
+			int old_dcd_state;
+			unsigned char signals = *((unsigned char *)
+					urb->transfer_buffer +
+					sizeof(struct usb_ctrlrequest));
+
+			dev_dbg(dev, "%s: signal x%x\n", __func__, signals);
+
+			old_dcd_state = portdata->dcd_state;
+			portdata->cts_state = 1;
+			portdata->dcd_state = ((signals & 0x01) ? 1 : 0);
+			portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
+			portdata->ri_state = ((signals & 0x08) ? 1 : 0);
+
+			if (old_dcd_state && !portdata->dcd_state)
+				tty_port_tty_hangup(&port->port, true);
+		} else {
+			dev_dbg(dev, "%s: type %x req %x\n", __func__,
+				req_pkt->bRequestType, req_pkt->bRequest);
+		}
+	} else if (status == -ENOENT || status == -ESHUTDOWN) {
+		dev_dbg(dev, "%s: urb stopped: %d\n", __func__, status);
+	} else
+		dev_dbg(dev, "%s: error %d\n", __func__, status);
+
+	/* Resubmit urb so we continue receiving IRQ data */
+	if (status != -ESHUTDOWN && status != -ENOENT) {
+		usb_mark_last_busy(port->serial->dev);
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err)
+			dev_dbg(dev, "%s: resubmit intr urb failed. (%d)\n",
+				__func__, err);
+	}
+}
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
new file mode 100644
index 000000000..6365cfe54
--- /dev/null
+++ b/drivers/usb/serial/oti6858.c
@@ -0,0 +1,844 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ours Technology Inc. OTi-6858 USB to serial adapter driver.
+ *
+ * Copyleft  (C) 2007 Kees Lemmens (adapted for kernel 2.6.20)
+ * Copyright (C) 2006 Tomasz Michal Lukaszewski (FIXME: add e-mail)
+ * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2003 IBM Corp.
+ *
+ * Many thanks to the authors of pl2303 driver: all functions in this file
+ * are heavily based on pl2303 code, buffering code is a 1-to-1 copy.
+ *
+ * Warning! You use this driver on your own risk! The only official
+ * description of this device I have is datasheet from manufacturer,
+ * and it doesn't contain almost any information needed to write a driver.
+ * Almost all knowlegde used while writing this driver was gathered by:
+ *  - analyzing traffic between device and the M$ Windows 2000 driver,
+ *  - trying different bit combinations and checking pin states
+ *    with a voltmeter,
+ *  - receiving malformed frames and producing buffer overflows
+ *    to learn how errors are reported,
+ * So, THIS CODE CAN DESTROY OTi-6858 AND ANY OTHER DEVICES, THAT ARE
+ * CONNECTED TO IT!
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ *
+ * TODO:
+ *  - implement correct flushing for ioctls and oti6858_close()
+ *  - check how errors (rx overflow, parity error, framing error) are reported
+ *  - implement oti6858_break_ctl()
+ *  - implement more ioctls
+ *  - test/implement flow control
+ *  - allow setting custom baud rates
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+#include <linux/kfifo.h>
+#include "oti6858.h"
+
+#define OTI6858_DESCRIPTION \
+	"Ours Technology Inc. OTi-6858 USB to serial adapter driver"
+#define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>"
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* requests */
+#define	OTI6858_REQ_GET_STATUS		(USB_DIR_IN | USB_TYPE_VENDOR | 0x00)
+#define	OTI6858_REQ_T_GET_STATUS	0x01
+
+#define	OTI6858_REQ_SET_LINE		(USB_DIR_OUT | USB_TYPE_VENDOR | 0x00)
+#define	OTI6858_REQ_T_SET_LINE		0x00
+
+#define	OTI6858_REQ_CHECK_TXBUFF	(USB_DIR_IN | USB_TYPE_VENDOR | 0x01)
+#define	OTI6858_REQ_T_CHECK_TXBUFF	0x00
+
+/* format of the control packet */
+struct oti6858_control_pkt {
+	__le16	divisor;	/* baud rate = 96000000 / (16 * divisor), LE */
+#define OTI6858_MAX_BAUD_RATE	3000000
+	u8	frame_fmt;
+#define FMT_STOP_BITS_MASK	0xc0
+#define FMT_STOP_BITS_1		0x00
+#define FMT_STOP_BITS_2		0x40	/* 1.5 stop bits if FMT_DATA_BITS_5 */
+#define FMT_PARITY_MASK		0x38
+#define FMT_PARITY_NONE		0x00
+#define FMT_PARITY_ODD		0x08
+#define FMT_PARITY_EVEN		0x18
+#define FMT_PARITY_MARK		0x28
+#define FMT_PARITY_SPACE	0x38
+#define FMT_DATA_BITS_MASK	0x03
+#define FMT_DATA_BITS_5		0x00
+#define FMT_DATA_BITS_6		0x01
+#define FMT_DATA_BITS_7		0x02
+#define FMT_DATA_BITS_8		0x03
+	u8	something;	/* always equals 0x43 */
+	u8	control;	/* settings of flow control lines */
+#define CONTROL_MASK		0x0c
+#define CONTROL_DTR_HIGH	0x08
+#define CONTROL_RTS_HIGH	0x04
+	u8	tx_status;
+#define	TX_BUFFER_EMPTIED	0x09
+	u8	pin_state;
+#define PIN_MASK		0x3f
+#define PIN_MSR_MASK		0x1b
+#define PIN_RTS			0x20	/* output pin */
+#define PIN_CTS			0x10	/* input pin, active low */
+#define PIN_DSR			0x08	/* input pin, active low */
+#define PIN_DTR			0x04	/* output pin */
+#define PIN_RI			0x02	/* input pin, active low */
+#define PIN_DCD			0x01	/* input pin, active low */
+	u8	rx_bytes_avail;		/* number of bytes in rx buffer */;
+};
+
+#define OTI6858_CTRL_PKT_SIZE	sizeof(struct oti6858_control_pkt)
+#define OTI6858_CTRL_EQUALS_PENDING(a, priv) \
+	(((a)->divisor == (priv)->pending_setup.divisor) \
+	  && ((a)->control == (priv)->pending_setup.control) \
+	  && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt))
+
+/* function prototypes */
+static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port);
+static void oti6858_close(struct usb_serial_port *port);
+static void oti6858_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
+				const struct ktermios *old_termios);
+static void oti6858_init_termios(struct tty_struct *tty);
+static void oti6858_read_int_callback(struct urb *urb);
+static void oti6858_read_bulk_callback(struct urb *urb);
+static void oti6858_write_bulk_callback(struct urb *urb);
+static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *buf, int count);
+static unsigned int oti6858_write_room(struct tty_struct *tty);
+static unsigned int oti6858_chars_in_buffer(struct tty_struct *tty);
+static int oti6858_tiocmget(struct tty_struct *tty);
+static int oti6858_tiocmset(struct tty_struct *tty,
+				unsigned int set, unsigned int clear);
+static int oti6858_port_probe(struct usb_serial_port *port);
+static void oti6858_port_remove(struct usb_serial_port *port);
+
+/* device info */
+static struct usb_serial_driver oti6858_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"oti6858",
+	},
+	.id_table =		id_table,
+	.num_ports =		1,
+	.num_bulk_in =		1,
+	.num_bulk_out =		1,
+	.num_interrupt_in =	1,
+	.open =			oti6858_open,
+	.close =		oti6858_close,
+	.write =		oti6858_write,
+	.set_termios =		oti6858_set_termios,
+	.init_termios = 	oti6858_init_termios,
+	.tiocmget =		oti6858_tiocmget,
+	.tiocmset =		oti6858_tiocmset,
+	.tiocmiwait =		usb_serial_generic_tiocmiwait,
+	.read_bulk_callback =	oti6858_read_bulk_callback,
+	.read_int_callback =	oti6858_read_int_callback,
+	.write_bulk_callback =	oti6858_write_bulk_callback,
+	.write_room =		oti6858_write_room,
+	.chars_in_buffer =	oti6858_chars_in_buffer,
+	.port_probe =		oti6858_port_probe,
+	.port_remove =		oti6858_port_remove,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&oti6858_device, NULL
+};
+
+struct oti6858_private {
+	spinlock_t lock;
+
+	struct oti6858_control_pkt status;
+
+	struct {
+		u8 read_urb_in_use;
+		u8 write_urb_in_use;
+	} flags;
+	struct delayed_work delayed_write_work;
+
+	struct {
+		__le16 divisor;
+		u8 frame_fmt;
+		u8 control;
+	} pending_setup;
+	u8 transient;
+	u8 setup_done;
+	struct delayed_work delayed_setup_work;
+
+	struct usb_serial_port *port;   /* USB port with which associated */
+};
+
+static void setup_line(struct work_struct *work)
+{
+	struct oti6858_private *priv = container_of(work,
+			struct oti6858_private, delayed_setup_work.work);
+	struct usb_serial_port *port = priv->port;
+	struct oti6858_control_pkt *new_setup;
+	unsigned long flags;
+	int result;
+
+	new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
+	if (!new_setup) {
+		/* we will try again */
+		schedule_delayed_work(&priv->delayed_setup_work,
+						msecs_to_jiffies(2));
+		return;
+	}
+
+	result = usb_control_msg(port->serial->dev,
+				usb_rcvctrlpipe(port->serial->dev, 0),
+				OTI6858_REQ_T_GET_STATUS,
+				OTI6858_REQ_GET_STATUS,
+				0, 0,
+				new_setup, OTI6858_CTRL_PKT_SIZE,
+				100);
+
+	if (result != OTI6858_CTRL_PKT_SIZE) {
+		dev_err(&port->dev, "%s(): error reading status\n", __func__);
+		kfree(new_setup);
+		/* we will try again */
+		schedule_delayed_work(&priv->delayed_setup_work,
+							msecs_to_jiffies(2));
+		return;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (!OTI6858_CTRL_EQUALS_PENDING(new_setup, priv)) {
+		new_setup->divisor = priv->pending_setup.divisor;
+		new_setup->control = priv->pending_setup.control;
+		new_setup->frame_fmt = priv->pending_setup.frame_fmt;
+
+		spin_unlock_irqrestore(&priv->lock, flags);
+		result = usb_control_msg(port->serial->dev,
+					usb_sndctrlpipe(port->serial->dev, 0),
+					OTI6858_REQ_T_SET_LINE,
+					OTI6858_REQ_SET_LINE,
+					0, 0,
+					new_setup, OTI6858_CTRL_PKT_SIZE,
+					100);
+	} else {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		result = 0;
+	}
+	kfree(new_setup);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (result != OTI6858_CTRL_PKT_SIZE)
+		priv->transient = 0;
+	priv->setup_done = 1;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__);
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (result != 0) {
+		dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n",
+			__func__, result);
+	}
+}
+
+static void send_data(struct work_struct *work)
+{
+	struct oti6858_private *priv = container_of(work,
+			struct oti6858_private, delayed_write_work.work);
+	struct usb_serial_port *port = priv->port;
+	int count = 0, result;
+	unsigned long flags;
+	u8 *allow;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->flags.write_urb_in_use) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		schedule_delayed_work(&priv->delayed_write_work,
+						msecs_to_jiffies(2));
+		return;
+	}
+	priv->flags.write_urb_in_use = 1;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	spin_lock_irqsave(&port->lock, flags);
+	count = kfifo_len(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (count > port->bulk_out_size)
+		count = port->bulk_out_size;
+
+	if (count != 0) {
+		allow = kmalloc(1, GFP_KERNEL);
+		if (!allow)
+			return;
+
+		result = usb_control_msg(port->serial->dev,
+				usb_rcvctrlpipe(port->serial->dev, 0),
+				OTI6858_REQ_T_CHECK_TXBUFF,
+				OTI6858_REQ_CHECK_TXBUFF,
+				count, 0, allow, 1, 100);
+		if (result != 1 || *allow != 0)
+			count = 0;
+		kfree(allow);
+	}
+
+	if (count == 0) {
+		priv->flags.write_urb_in_use = 0;
+
+		dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__);
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
+		if (result != 0) {
+			dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n",
+				__func__, result);
+		}
+		return;
+	}
+
+	count = kfifo_out_locked(&port->write_fifo,
+					port->write_urb->transfer_buffer,
+					count, &port->lock);
+	port->write_urb->transfer_buffer_length = count;
+	result = usb_submit_urb(port->write_urb, GFP_NOIO);
+	if (result != 0) {
+		dev_err_console(port, "%s(): usb_submit_urb() failed with error %d\n",
+				__func__, result);
+		priv->flags.write_urb_in_use = 0;
+	}
+
+	usb_serial_port_softint(port);
+}
+
+static int oti6858_port_probe(struct usb_serial_port *port)
+{
+	struct oti6858_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+	priv->port = port;
+	INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
+	INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
+
+	usb_set_serial_port_data(port, priv);
+
+	port->port.drain_delay = 256;	/* FIXME: check the FIFO length */
+
+	return 0;
+}
+
+static void oti6858_port_remove(struct usb_serial_port *port)
+{
+	struct oti6858_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+}
+
+static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *buf, int count)
+{
+	if (!count)
+		return count;
+
+	count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
+
+	return count;
+}
+
+static unsigned int oti6858_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned int room;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	room = kfifo_avail(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return room;
+}
+
+static unsigned int oti6858_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned int chars;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	chars = kfifo_len(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return chars;
+}
+
+static void oti6858_init_termios(struct tty_struct *tty)
+{
+	tty_encode_baud_rate(tty, 38400, 38400);
+}
+
+static void oti6858_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
+				const struct ktermios *old_termios)
+{
+	struct oti6858_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned int cflag;
+	u8 frame_fmt, control;
+	__le16 divisor;
+	int br;
+
+	cflag = tty->termios.c_cflag;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	divisor = priv->pending_setup.divisor;
+	frame_fmt = priv->pending_setup.frame_fmt;
+	control = priv->pending_setup.control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	frame_fmt &= ~FMT_DATA_BITS_MASK;
+	switch (cflag & CSIZE) {
+	case CS5:
+		frame_fmt |= FMT_DATA_BITS_5;
+		break;
+	case CS6:
+		frame_fmt |= FMT_DATA_BITS_6;
+		break;
+	case CS7:
+		frame_fmt |= FMT_DATA_BITS_7;
+		break;
+	default:
+	case CS8:
+		frame_fmt |= FMT_DATA_BITS_8;
+		break;
+	}
+
+	/* manufacturer claims that this device can work with baud rates
+	 * up to 3 Mbps; I've tested it only on 115200 bps, so I can't
+	 * guarantee that any other baud rate will work (especially
+	 * the higher ones)
+	 */
+	br = tty_get_baud_rate(tty);
+	if (br == 0) {
+		divisor = 0;
+	} else {
+		int real_br;
+		int new_divisor;
+		br = min(br, OTI6858_MAX_BAUD_RATE);
+
+		new_divisor = (96000000 + 8 * br) / (16 * br);
+		real_br = 96000000 / (16 * new_divisor);
+		divisor = cpu_to_le16(new_divisor);
+		tty_encode_baud_rate(tty, real_br, real_br);
+	}
+
+	frame_fmt &= ~FMT_STOP_BITS_MASK;
+	if ((cflag & CSTOPB) != 0)
+		frame_fmt |= FMT_STOP_BITS_2;
+	else
+		frame_fmt |= FMT_STOP_BITS_1;
+
+	frame_fmt &= ~FMT_PARITY_MASK;
+	if ((cflag & PARENB) != 0) {
+		if ((cflag & PARODD) != 0)
+			frame_fmt |= FMT_PARITY_ODD;
+		else
+			frame_fmt |= FMT_PARITY_EVEN;
+	} else {
+		frame_fmt |= FMT_PARITY_NONE;
+	}
+
+	control &= ~CONTROL_MASK;
+	if ((cflag & CRTSCTS) != 0)
+		control |= (CONTROL_DTR_HIGH | CONTROL_RTS_HIGH);
+
+	/* change control lines if we are switching to or from B0 */
+	/* FIXME:
+	spin_lock_irqsave(&priv->lock, flags);
+	control = priv->line_control;
+	if ((cflag & CBAUD) == B0)
+		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+	else
+		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+	if (control != priv->line_control) {
+		control = priv->line_control;
+		spin_unlock_irqrestore(&priv->lock, flags);
+		set_control_lines(serial->dev, control);
+	} else {
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+	*/
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (divisor != priv->pending_setup.divisor
+			|| control != priv->pending_setup.control
+			|| frame_fmt != priv->pending_setup.frame_fmt) {
+		priv->pending_setup.divisor = divisor;
+		priv->pending_setup.control = control;
+		priv->pending_setup.frame_fmt = frame_fmt;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct oti6858_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	struct oti6858_control_pkt *buf;
+	unsigned long flags;
+	int result;
+
+	usb_clear_halt(serial->dev, port->write_urb->pipe);
+	usb_clear_halt(serial->dev, port->read_urb->pipe);
+
+	buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+				OTI6858_REQ_T_GET_STATUS,
+				OTI6858_REQ_GET_STATUS,
+				0, 0,
+				buf, OTI6858_CTRL_PKT_SIZE,
+				100);
+	if (result != OTI6858_CTRL_PKT_SIZE) {
+		/* assume default (after power-on reset) values */
+		buf->divisor = cpu_to_le16(0x009c);	/* 38400 bps */
+		buf->frame_fmt = 0x03;	/* 8N1 */
+		buf->something = 0x43;
+		buf->control = 0x4c;	/* DTR, RTS */
+		buf->tx_status = 0x00;
+		buf->pin_state = 0x5b;	/* RTS, CTS, DSR, DTR, RI, DCD */
+		buf->rx_bytes_avail = 0x00;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	memcpy(&priv->status, buf, OTI6858_CTRL_PKT_SIZE);
+	priv->pending_setup.divisor = buf->divisor;
+	priv->pending_setup.frame_fmt = buf->frame_fmt;
+	priv->pending_setup.control = buf->control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	kfree(buf);
+
+	dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__);
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (result != 0) {
+		dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n",
+			__func__, result);
+		oti6858_close(port);
+		return result;
+	}
+
+	/* setup termios */
+	if (tty)
+		oti6858_set_termios(tty, port, NULL);
+
+	return 0;
+}
+
+static void oti6858_close(struct usb_serial_port *port)
+{
+	struct oti6858_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	/* clear out any remaining data in the buffer */
+	kfifo_reset_out(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	dev_dbg(&port->dev, "%s(): after buf_clear()\n", __func__);
+
+	/* cancel scheduled setup */
+	cancel_delayed_work_sync(&priv->delayed_setup_work);
+	cancel_delayed_work_sync(&priv->delayed_write_work);
+
+	/* shutdown our urbs */
+	dev_dbg(&port->dev, "%s(): shutting down urbs\n", __func__);
+	usb_kill_urb(port->write_urb);
+	usb_kill_urb(port->read_urb);
+	usb_kill_urb(port->interrupt_in_urb);
+}
+
+static int oti6858_tiocmset(struct tty_struct *tty,
+				unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct oti6858_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	dev_dbg(&port->dev, "%s(set = 0x%08x, clear = 0x%08x)\n",
+		__func__, set, clear);
+
+	/* FIXME: check if this is correct (active high/low) */
+	spin_lock_irqsave(&priv->lock, flags);
+	control = priv->pending_setup.control;
+	if ((set & TIOCM_RTS) != 0)
+		control |= CONTROL_RTS_HIGH;
+	if ((set & TIOCM_DTR) != 0)
+		control |= CONTROL_DTR_HIGH;
+	if ((clear & TIOCM_RTS) != 0)
+		control &= ~CONTROL_RTS_HIGH;
+	if ((clear & TIOCM_DTR) != 0)
+		control &= ~CONTROL_DTR_HIGH;
+
+	if (control != priv->pending_setup.control)
+		priv->pending_setup.control = control;
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return 0;
+}
+
+static int oti6858_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct oti6858_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned pin_state;
+	unsigned result = 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	pin_state = priv->status.pin_state & PIN_MASK;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/* FIXME: check if this is correct (active high/low) */
+	if ((pin_state & PIN_RTS) != 0)
+		result |= TIOCM_RTS;
+	if ((pin_state & PIN_CTS) != 0)
+		result |= TIOCM_CTS;
+	if ((pin_state & PIN_DSR) != 0)
+		result |= TIOCM_DSR;
+	if ((pin_state & PIN_DTR) != 0)
+		result |= TIOCM_DTR;
+	if ((pin_state & PIN_RI) != 0)
+		result |= TIOCM_RI;
+	if ((pin_state & PIN_DCD) != 0)
+		result |= TIOCM_CD;
+
+	dev_dbg(&port->dev, "%s() = 0x%08x\n", __func__, result);
+
+	return result;
+}
+
+static void oti6858_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port =  urb->context;
+	struct oti6858_private *priv = usb_get_serial_port_data(port);
+	int transient = 0, can_recv = 0, resubmit = 1;
+	int status = urb->status;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n",
+			__func__, status);
+		return;
+	default:
+		dev_dbg(&urb->dev->dev, "%s(): nonzero urb status received: %d\n",
+			__func__, status);
+		break;
+	}
+
+	if (status == 0 && urb->actual_length == OTI6858_CTRL_PKT_SIZE) {
+		struct oti6858_control_pkt *xs = urb->transfer_buffer;
+		unsigned long flags;
+
+		spin_lock_irqsave(&priv->lock, flags);
+
+		if (!priv->transient) {
+			if (!OTI6858_CTRL_EQUALS_PENDING(xs, priv)) {
+				if (xs->rx_bytes_avail == 0) {
+					priv->transient = 4;
+					priv->setup_done = 0;
+					resubmit = 0;
+					dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__);
+					schedule_delayed_work(&priv->delayed_setup_work, 0);
+				}
+			}
+		} else {
+			if (OTI6858_CTRL_EQUALS_PENDING(xs, priv)) {
+				priv->transient = 0;
+			} else if (!priv->setup_done) {
+				resubmit = 0;
+			} else if (--priv->transient == 0) {
+				if (xs->rx_bytes_avail == 0) {
+					priv->transient = 4;
+					priv->setup_done = 0;
+					resubmit = 0;
+					dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__);
+					schedule_delayed_work(&priv->delayed_setup_work, 0);
+				}
+			}
+		}
+
+		if (!priv->transient) {
+			u8 delta = xs->pin_state ^ priv->status.pin_state;
+
+			if (delta & PIN_MSR_MASK) {
+				if (delta & PIN_CTS)
+					port->icount.cts++;
+				if (delta & PIN_DSR)
+					port->icount.dsr++;
+				if (delta & PIN_RI)
+					port->icount.rng++;
+				if (delta & PIN_DCD)
+					port->icount.dcd++;
+
+				wake_up_interruptible(&port->port.delta_msr_wait);
+			}
+
+			memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE);
+		}
+
+		if (!priv->transient && xs->rx_bytes_avail != 0) {
+			can_recv = xs->rx_bytes_avail;
+			priv->flags.read_urb_in_use = 1;
+		}
+
+		transient = priv->transient;
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+
+	if (can_recv) {
+		int result;
+
+		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+		if (result != 0) {
+			priv->flags.read_urb_in_use = 0;
+			dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
+					" error %d\n", __func__, result);
+		} else {
+			resubmit = 0;
+		}
+	} else if (!transient) {
+		unsigned long flags;
+		int count;
+
+		spin_lock_irqsave(&port->lock, flags);
+		count = kfifo_len(&port->write_fifo);
+		spin_unlock_irqrestore(&port->lock, flags);
+
+		spin_lock_irqsave(&priv->lock, flags);
+		if (priv->flags.write_urb_in_use == 0 && count != 0) {
+			schedule_delayed_work(&priv->delayed_write_work, 0);
+			resubmit = 0;
+		}
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+
+	if (resubmit) {
+		int result;
+
+/*		dev_dbg(&urb->dev->dev, "%s(): submitting interrupt urb\n", __func__); */
+		result = usb_submit_urb(urb, GFP_ATOMIC);
+		if (result != 0) {
+			dev_err(&urb->dev->dev,
+					"%s(): usb_submit_urb() failed with"
+					" error %d\n", __func__, result);
+		}
+	}
+}
+
+static void oti6858_read_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port =  urb->context;
+	struct oti6858_private *priv = usb_get_serial_port_data(port);
+	unsigned char *data = urb->transfer_buffer;
+	unsigned long flags;
+	int status = urb->status;
+	int result;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->flags.read_urb_in_use = 0;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (status != 0) {
+		dev_dbg(&urb->dev->dev, "%s(): unable to handle the error, exiting\n", __func__);
+		return;
+	}
+
+	if (urb->actual_length > 0) {
+		tty_insert_flip_string(&port->port, data, urb->actual_length);
+		tty_flip_buffer_push(&port->port);
+	}
+
+	/* schedule the interrupt urb */
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+	if (result != 0 && result != -EPERM) {
+		dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
+				" error %d\n", __func__, result);
+	}
+}
+
+static void oti6858_write_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port =  urb->context;
+	struct oti6858_private *priv = usb_get_serial_port_data(port);
+	int status = urb->status;
+	int result;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n", __func__, status);
+		priv->flags.write_urb_in_use = 0;
+		return;
+	default:
+		/* error in the urb, so we have to resubmit it */
+		dev_dbg(&urb->dev->dev, "%s(): nonzero write bulk status received: %d\n", __func__, status);
+		dev_dbg(&urb->dev->dev, "%s(): overflow in write\n", __func__);
+
+		port->write_urb->transfer_buffer_length = 1;
+		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+		if (result) {
+			dev_err_console(port, "%s(): usb_submit_urb() failed,"
+					" error %d\n", __func__, result);
+		} else {
+			return;
+		}
+	}
+
+	priv->flags.write_urb_in_use = 0;
+
+	/* schedule the interrupt urb if we are still open */
+	dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__);
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+	if (result != 0) {
+		dev_err(&port->dev, "%s(): failed submitting int urb,"
+					" error %d\n", __func__, result);
+	}
+}
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION(OTI6858_DESCRIPTION);
+MODULE_AUTHOR(OTI6858_AUTHOR);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/oti6858.h b/drivers/usb/serial/oti6858.h
new file mode 100644
index 000000000..5c25836fd
--- /dev/null
+++ b/drivers/usb/serial/oti6858.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Ours Technology Inc. OTi-6858 USB to serial adapter driver.
+ */
+#ifndef __LINUX_USB_SERIAL_OTI6858_H
+#define __LINUX_USB_SERIAL_OTI6858_H
+
+#define OTI6858_VENDOR_ID	0x0ea0
+#define OTI6858_PRODUCT_ID	0x6858
+
+#endif
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
new file mode 100644
index 000000000..8949c1891
--- /dev/null
+++ b/drivers/usb/serial/pl2303.c
@@ -0,0 +1,1268 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Prolific PL2303 USB to serial adaptor driver
+ *
+ * Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2003 IBM Corp.
+ *
+ * Original driver for 2.2.x by anonymous
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <asm/unaligned.h>
+#include "pl2303.h"
+
+
+#define PL2303_QUIRK_UART_STATE_IDX0		BIT(0)
+#define PL2303_QUIRK_LEGACY			BIT(1)
+#define PL2303_QUIRK_ENDPOINT_HACK		BIT(2)
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID),
+		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_CHILITAG) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_TB) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GC) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GB) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GT) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GL) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GE) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GS) },
+	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
+	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
+	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID),
+		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
+	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC485),
+		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
+	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC232B),
+		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
+	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) },
+	{ USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
+	{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
+	{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
+	{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
+	{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
+	{ USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
+	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
+	{ USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
+	{ USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
+	{ USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
+	{ USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
+	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1),
+		.driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65),
+		.driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75),
+		.driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81),
+		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
+	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */
+	{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
+	{ USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
+	{ USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
+	{ USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
+	{ USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
+	{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
+	{ USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
+	{ USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
+	{ USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID),
+		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
+	{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
+	{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
+	{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
+	{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD381_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD381GC_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LM920_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LM930_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LM940_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_TD620_PRODUCT_ID) },
+	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
+	{ USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
+	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
+	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
+	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530GC_PRODUCT_ID) },
+	{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
+	{ USB_DEVICE(AT_VENDOR_ID, AT_VTKIT3_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_PRODUCT_ID) },
+	{ }					/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+#define SET_LINE_REQUEST_TYPE		0x21
+#define SET_LINE_REQUEST		0x20
+
+#define SET_CONTROL_REQUEST_TYPE	0x21
+#define SET_CONTROL_REQUEST		0x22
+#define CONTROL_DTR			0x01
+#define CONTROL_RTS			0x02
+
+#define BREAK_REQUEST_TYPE		0x21
+#define BREAK_REQUEST			0x23
+#define BREAK_ON			0xffff
+#define BREAK_OFF			0x0000
+
+#define GET_LINE_REQUEST_TYPE		0xa1
+#define GET_LINE_REQUEST		0x21
+
+#define VENDOR_WRITE_REQUEST_TYPE	0x40
+#define VENDOR_WRITE_REQUEST		0x01
+#define VENDOR_WRITE_NREQUEST		0x80
+
+#define VENDOR_READ_REQUEST_TYPE	0xc0
+#define VENDOR_READ_REQUEST		0x01
+#define VENDOR_READ_NREQUEST		0x81
+
+#define UART_STATE_INDEX		8
+#define UART_STATE_MSR_MASK		0x8b
+#define UART_STATE_TRANSIENT_MASK	0x74
+#define UART_DCD			0x01
+#define UART_DSR			0x02
+#define UART_BREAK_ERROR		0x04
+#define UART_RING			0x08
+#define UART_FRAME_ERROR		0x10
+#define UART_PARITY_ERROR		0x20
+#define UART_OVERRUN_ERROR		0x40
+#define UART_CTS			0x80
+
+#define PL2303_FLOWCTRL_MASK		0xf0
+
+#define PL2303_READ_TYPE_HX_STATUS	0x8080
+
+#define PL2303_HXN_RESET_REG		0x07
+#define PL2303_HXN_RESET_UPSTREAM_PIPE	0x02
+#define PL2303_HXN_RESET_DOWNSTREAM_PIPE	0x01
+
+#define PL2303_HXN_FLOWCTRL_REG		0x0a
+#define PL2303_HXN_FLOWCTRL_MASK	0x1c
+#define PL2303_HXN_FLOWCTRL_NONE	0x1c
+#define PL2303_HXN_FLOWCTRL_RTS_CTS	0x18
+#define PL2303_HXN_FLOWCTRL_XON_XOFF	0x0c
+
+static void pl2303_set_break(struct usb_serial_port *port, bool enable);
+
+enum pl2303_type {
+	TYPE_H,
+	TYPE_HX,
+	TYPE_TA,
+	TYPE_TB,
+	TYPE_HXD,
+	TYPE_HXN,
+	TYPE_COUNT
+};
+
+struct pl2303_type_data {
+	const char *name;
+	speed_t max_baud_rate;
+	unsigned long quirks;
+	unsigned int no_autoxonxoff:1;
+	unsigned int no_divisors:1;
+	unsigned int alt_divisors:1;
+};
+
+struct pl2303_serial_private {
+	const struct pl2303_type_data *type;
+	unsigned long quirks;
+};
+
+struct pl2303_private {
+	spinlock_t lock;
+	u8 line_control;
+	u8 line_status;
+
+	u8 line_settings[7];
+};
+
+static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = {
+	[TYPE_H] = {
+		.name			= "H",
+		.max_baud_rate		= 1228800,
+		.quirks			= PL2303_QUIRK_LEGACY,
+		.no_autoxonxoff		= true,
+	},
+	[TYPE_HX] = {
+		.name			= "HX",
+		.max_baud_rate		= 6000000,
+	},
+	[TYPE_TA] = {
+		.name			= "TA",
+		.max_baud_rate		= 6000000,
+		.alt_divisors		= true,
+	},
+	[TYPE_TB] = {
+		.name			= "TB",
+		.max_baud_rate		= 12000000,
+		.alt_divisors		= true,
+	},
+	[TYPE_HXD] = {
+		.name			= "HXD",
+		.max_baud_rate		= 12000000,
+	},
+	[TYPE_HXN] = {
+		.name			= "G",
+		.max_baud_rate		= 12000000,
+		.no_divisors		= true,
+	},
+};
+
+static int pl2303_vendor_read(struct usb_serial *serial, u16 value,
+							unsigned char buf[1])
+{
+	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+	struct device *dev = &serial->interface->dev;
+	u8 request;
+	int res;
+
+	if (spriv->type == &pl2303_type_data[TYPE_HXN])
+		request = VENDOR_READ_NREQUEST;
+	else
+		request = VENDOR_READ_REQUEST;
+
+	res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+			request, VENDOR_READ_REQUEST_TYPE,
+			value, 0, buf, 1, 100);
+	if (res != 1) {
+		dev_err(dev, "%s - failed to read [%04x]: %d\n", __func__,
+								value, res);
+		if (res >= 0)
+			res = -EIO;
+
+		return res;
+	}
+
+	dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, buf[0]);
+
+	return 0;
+}
+
+static int pl2303_vendor_write(struct usb_serial *serial, u16 value, u16 index)
+{
+	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+	struct device *dev = &serial->interface->dev;
+	u8 request;
+	int res;
+
+	dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, index);
+
+	if (spriv->type == &pl2303_type_data[TYPE_HXN])
+		request = VENDOR_WRITE_NREQUEST;
+	else
+		request = VENDOR_WRITE_REQUEST;
+
+	res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			request, VENDOR_WRITE_REQUEST_TYPE,
+			value, index, NULL, 0, 100);
+	if (res) {
+		dev_err(dev, "%s - failed to write [%04x]: %d\n", __func__,
+								value, res);
+		return res;
+	}
+
+	return 0;
+}
+
+static int pl2303_update_reg(struct usb_serial *serial, u8 reg, u8 mask, u8 val)
+{
+	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+	int ret = 0;
+	u8 *buf;
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	if (spriv->type == &pl2303_type_data[TYPE_HXN])
+		ret = pl2303_vendor_read(serial, reg, buf);
+	else
+		ret = pl2303_vendor_read(serial, reg | 0x80, buf);
+
+	if (ret)
+		goto out_free;
+
+	*buf &= ~mask;
+	*buf |= val & mask;
+
+	ret = pl2303_vendor_write(serial, reg, *buf);
+out_free:
+	kfree(buf);
+
+	return ret;
+}
+
+static int pl2303_probe(struct usb_serial *serial,
+					const struct usb_device_id *id)
+{
+	usb_set_serial_data(serial, (void *)id->driver_info);
+
+	return 0;
+}
+
+/*
+ * Use interrupt endpoint from first interface if available.
+ *
+ * This is needed due to the looney way its endpoints are set up.
+ */
+static int pl2303_endpoint_hack(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds)
+{
+	struct usb_interface *interface = serial->interface;
+	struct usb_device *dev = serial->dev;
+	struct device *ddev = &interface->dev;
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	unsigned int i;
+
+	if (interface == dev->actconfig->interface[0])
+		return 0;
+
+	/* check out the endpoints of the other interface */
+	iface_desc = dev->actconfig->interface[0]->cur_altsetting;
+
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+		endpoint = &iface_desc->endpoint[i].desc;
+
+		if (!usb_endpoint_is_int_in(endpoint))
+			continue;
+
+		dev_dbg(ddev, "found interrupt in on separate interface\n");
+		if (epds->num_interrupt_in < ARRAY_SIZE(epds->interrupt_in))
+			epds->interrupt_in[epds->num_interrupt_in++] = endpoint;
+	}
+
+	return 0;
+}
+
+static int pl2303_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds)
+{
+	unsigned long quirks = (unsigned long)usb_get_serial_data(serial);
+	struct device *dev = &serial->interface->dev;
+	int ret;
+
+	if (quirks & PL2303_QUIRK_ENDPOINT_HACK) {
+		ret = pl2303_endpoint_hack(serial, epds);
+		if (ret)
+			return ret;
+	}
+
+	if (epds->num_interrupt_in < 1) {
+		dev_err(dev, "required interrupt-in endpoint missing\n");
+		return -ENODEV;
+	}
+
+	return 1;
+}
+
+static bool pl2303_supports_hx_status(struct usb_serial *serial)
+{
+	int ret;
+	u8 buf;
+
+	ret = usb_control_msg_recv(serial->dev, 0, VENDOR_READ_REQUEST,
+			VENDOR_READ_REQUEST_TYPE, PL2303_READ_TYPE_HX_STATUS,
+			0, &buf, 1, 100, GFP_KERNEL);
+
+	return ret == 0;
+}
+
+static int pl2303_detect_type(struct usb_serial *serial)
+{
+	struct usb_device_descriptor *desc = &serial->dev->descriptor;
+	u16 bcdDevice, bcdUSB;
+
+	/*
+	 * Legacy PL2303H, variants 0 and 1 (difference unknown).
+	 */
+	if (desc->bDeviceClass == 0x02)
+		return TYPE_H;		/* variant 0 */
+
+	if (desc->bMaxPacketSize0 != 0x40) {
+		if (desc->bDeviceClass == 0x00 || desc->bDeviceClass == 0xff)
+			return TYPE_H;	/* variant 1 */
+
+		return TYPE_H;		/* variant 0 */
+	}
+
+	bcdDevice = le16_to_cpu(desc->bcdDevice);
+	bcdUSB = le16_to_cpu(desc->bcdUSB);
+
+	switch (bcdUSB) {
+	case 0x101:
+		/* USB 1.0.1? Let's assume they meant 1.1... */
+		fallthrough;
+	case 0x110:
+		switch (bcdDevice) {
+		case 0x300:
+			return TYPE_HX;
+		case 0x400:
+			return TYPE_HXD;
+		default:
+			return TYPE_HX;
+		}
+		break;
+	case 0x200:
+		switch (bcdDevice) {
+		case 0x100:	/* GC */
+		case 0x105:
+			return TYPE_HXN;
+		case 0x300:	/* GT / TA */
+			if (pl2303_supports_hx_status(serial))
+				return TYPE_TA;
+			fallthrough;
+		case 0x305:
+		case 0x400:	/* GL */
+		case 0x405:
+			return TYPE_HXN;
+		case 0x500:	/* GE / TB */
+			if (pl2303_supports_hx_status(serial))
+				return TYPE_TB;
+			fallthrough;
+		case 0x505:
+		case 0x600:	/* GS */
+		case 0x605:
+		case 0x700:	/* GR */
+		case 0x705:
+			return TYPE_HXN;
+		}
+		break;
+	}
+
+	dev_err(&serial->interface->dev,
+			"unknown device type, please report to linux-usb@vger.kernel.org\n");
+	return -ENODEV;
+}
+
+static int pl2303_startup(struct usb_serial *serial)
+{
+	struct pl2303_serial_private *spriv;
+	enum pl2303_type type;
+	unsigned char *buf;
+	int ret;
+
+	ret = pl2303_detect_type(serial);
+	if (ret < 0)
+		return ret;
+
+	type = ret;
+	dev_dbg(&serial->interface->dev, "device type: %s\n", pl2303_type_data[type].name);
+
+	spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
+	if (!spriv)
+		return -ENOMEM;
+
+	spriv->type = &pl2303_type_data[type];
+	spriv->quirks = (unsigned long)usb_get_serial_data(serial);
+	spriv->quirks |= spriv->type->quirks;
+
+	usb_set_serial_data(serial, spriv);
+
+	if (type != TYPE_HXN) {
+		buf = kmalloc(1, GFP_KERNEL);
+		if (!buf) {
+			kfree(spriv);
+			return -ENOMEM;
+		}
+
+		pl2303_vendor_read(serial, 0x8484, buf);
+		pl2303_vendor_write(serial, 0x0404, 0);
+		pl2303_vendor_read(serial, 0x8484, buf);
+		pl2303_vendor_read(serial, 0x8383, buf);
+		pl2303_vendor_read(serial, 0x8484, buf);
+		pl2303_vendor_write(serial, 0x0404, 1);
+		pl2303_vendor_read(serial, 0x8484, buf);
+		pl2303_vendor_read(serial, 0x8383, buf);
+		pl2303_vendor_write(serial, 0, 1);
+		pl2303_vendor_write(serial, 1, 0);
+		if (spriv->quirks & PL2303_QUIRK_LEGACY)
+			pl2303_vendor_write(serial, 2, 0x24);
+		else
+			pl2303_vendor_write(serial, 2, 0x44);
+
+		kfree(buf);
+	}
+
+	return 0;
+}
+
+static void pl2303_release(struct usb_serial *serial)
+{
+	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+
+	kfree(spriv);
+}
+
+static int pl2303_port_probe(struct usb_serial_port *port)
+{
+	struct pl2303_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+
+	usb_set_serial_port_data(port, priv);
+
+	port->port.drain_delay = 256;
+
+	return 0;
+}
+
+static void pl2303_port_remove(struct usb_serial_port *port)
+{
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+
+	kfree(priv);
+}
+
+static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value)
+{
+	struct usb_device *dev = port->serial->dev;
+	int retval;
+
+	dev_dbg(&port->dev, "%s - %02x\n", __func__, value);
+
+	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
+				 value, 0, NULL, 0, 100);
+	if (retval)
+		dev_err(&port->dev, "%s - failed: %d\n", __func__, retval);
+
+	return retval;
+}
+
+/*
+ * Returns the nearest supported baud rate that can be set directly without
+ * using divisors.
+ */
+static speed_t pl2303_get_supported_baud_rate(speed_t baud)
+{
+	static const speed_t baud_sup[] = {
+		75, 150, 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600,
+		14400, 19200, 28800, 38400, 57600, 115200, 230400, 460800,
+		614400, 921600, 1228800, 2457600, 3000000, 6000000
+	};
+
+	unsigned i;
+
+	for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) {
+		if (baud_sup[i] > baud)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(baud_sup))
+		baud = baud_sup[i - 1];
+	else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1]))
+		baud = baud_sup[i - 1];
+	else
+		baud = baud_sup[i];
+
+	return baud;
+}
+
+/*
+ * NOTE: If unsupported baud rates are set directly, the PL2303 seems to
+ *       use 9600 baud.
+ */
+static speed_t pl2303_encode_baud_rate_direct(unsigned char buf[4],
+								speed_t baud)
+{
+	put_unaligned_le32(baud, buf);
+
+	return baud;
+}
+
+static speed_t pl2303_encode_baud_rate_divisor(unsigned char buf[4],
+								speed_t baud)
+{
+	unsigned int baseline, mantissa, exponent;
+
+	/*
+	 * Apparently the formula is:
+	 *   baudrate = 12M * 32 / (mantissa * 4^exponent)
+	 * where
+	 *   mantissa = buf[8:0]
+	 *   exponent = buf[11:9]
+	 */
+	baseline = 12000000 * 32;
+	mantissa = baseline / baud;
+	if (mantissa == 0)
+		mantissa = 1;	/* Avoid dividing by zero if baud > 32*12M. */
+	exponent = 0;
+	while (mantissa >= 512) {
+		if (exponent < 7) {
+			mantissa >>= 2;	/* divide by 4 */
+			exponent++;
+		} else {
+			/* Exponent is maxed. Trim mantissa and leave. */
+			mantissa = 511;
+			break;
+		}
+	}
+
+	buf[3] = 0x80;
+	buf[2] = 0;
+	buf[1] = exponent << 1 | mantissa >> 8;
+	buf[0] = mantissa & 0xff;
+
+	/* Calculate and return the exact baud rate. */
+	baud = (baseline / mantissa) >> (exponent << 1);
+
+	return baud;
+}
+
+static speed_t pl2303_encode_baud_rate_divisor_alt(unsigned char buf[4],
+								speed_t baud)
+{
+	unsigned int baseline, mantissa, exponent;
+
+	/*
+	 * Apparently, for the TA version the formula is:
+	 *   baudrate = 12M * 32 / (mantissa * 2^exponent)
+	 * where
+	 *   mantissa = buf[10:0]
+	 *   exponent = buf[15:13 16]
+	 */
+	baseline = 12000000 * 32;
+	mantissa = baseline / baud;
+	if (mantissa == 0)
+		mantissa = 1;   /* Avoid dividing by zero if baud > 32*12M. */
+	exponent = 0;
+	while (mantissa >= 2048) {
+		if (exponent < 15) {
+			mantissa >>= 1; /* divide by 2 */
+			exponent++;
+		} else {
+			/* Exponent is maxed. Trim mantissa and leave. */
+			mantissa = 2047;
+			break;
+		}
+	}
+
+	buf[3] = 0x80;
+	buf[2] = exponent & 0x01;
+	buf[1] = (exponent & ~0x01) << 4 | mantissa >> 8;
+	buf[0] = mantissa & 0xff;
+
+	/* Calculate and return the exact baud rate. */
+	baud = (baseline / mantissa) >> exponent;
+
+	return baud;
+}
+
+static void pl2303_encode_baud_rate(struct tty_struct *tty,
+					struct usb_serial_port *port,
+					u8 buf[4])
+{
+	struct usb_serial *serial = port->serial;
+	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+	speed_t	baud_sup;
+	speed_t baud;
+
+	baud = tty_get_baud_rate(tty);
+	dev_dbg(&port->dev, "baud requested = %u\n", baud);
+	if (!baud)
+		return;
+
+	if (spriv->type->max_baud_rate)
+		baud = min_t(speed_t, baud, spriv->type->max_baud_rate);
+	/*
+	 * Use direct method for supported baud rates, otherwise use divisors.
+	 * Newer chip types do not support divisor encoding.
+	 */
+	if (spriv->type->no_divisors)
+		baud_sup = baud;
+	else
+		baud_sup = pl2303_get_supported_baud_rate(baud);
+
+	if (baud == baud_sup)
+		baud = pl2303_encode_baud_rate_direct(buf, baud);
+	else if (spriv->type->alt_divisors)
+		baud = pl2303_encode_baud_rate_divisor_alt(buf, baud);
+	else
+		baud = pl2303_encode_baud_rate_divisor(buf, baud);
+
+	/* Save resulting baud rate */
+	tty_encode_baud_rate(tty, baud, baud);
+	dev_dbg(&port->dev, "baud set = %u\n", baud);
+}
+
+static int pl2303_get_line_request(struct usb_serial_port *port,
+							unsigned char buf[7])
+{
+	struct usb_device *udev = port->serial->dev;
+	int ret;
+
+	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+				GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
+				0, 0, buf, 7, 100);
+	if (ret != 7) {
+		dev_err(&port->dev, "%s - failed: %d\n", __func__, ret);
+
+		if (ret >= 0)
+			ret = -EIO;
+
+		return ret;
+	}
+
+	dev_dbg(&port->dev, "%s - %7ph\n", __func__, buf);
+
+	return 0;
+}
+
+static int pl2303_set_line_request(struct usb_serial_port *port,
+							unsigned char buf[7])
+{
+	struct usb_device *udev = port->serial->dev;
+	int ret;
+
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
+				0, 0, buf, 7, 100);
+	if (ret < 0) {
+		dev_err(&port->dev, "%s - failed: %d\n", __func__, ret);
+		return ret;
+	}
+
+	dev_dbg(&port->dev, "%s - %7ph\n", __func__, buf);
+
+	return 0;
+}
+
+static bool pl2303_termios_change(const struct ktermios *a, const struct ktermios *b)
+{
+	bool ixon_change;
+
+	ixon_change = ((a->c_iflag ^ b->c_iflag) & (IXON | IXANY)) ||
+			a->c_cc[VSTART] != b->c_cc[VSTART] ||
+			a->c_cc[VSTOP] != b->c_cc[VSTOP];
+
+	return tty_termios_hw_change(a, b) || ixon_change;
+}
+
+static bool pl2303_enable_xonxoff(struct tty_struct *tty, const struct pl2303_type_data *type)
+{
+	if (!I_IXON(tty) || I_IXANY(tty))
+		return false;
+
+	if (START_CHAR(tty) != 0x11 || STOP_CHAR(tty) != 0x13)
+		return false;
+
+	if (type->no_autoxonxoff)
+		return false;
+
+	return true;
+}
+
+static void pl2303_set_termios(struct tty_struct *tty,
+			       struct usb_serial_port *port,
+			       const struct ktermios *old_termios)
+{
+	struct usb_serial *serial = port->serial;
+	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned char *buf;
+	int ret;
+	u8 control;
+
+	if (old_termios && !pl2303_termios_change(&tty->termios, old_termios))
+		return;
+
+	buf = kzalloc(7, GFP_KERNEL);
+	if (!buf) {
+		/* Report back no change occurred */
+		if (old_termios)
+			tty->termios = *old_termios;
+		return;
+	}
+
+	pl2303_get_line_request(port, buf);
+
+	buf[6] = tty_get_char_size(tty->termios.c_cflag);
+	dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
+
+	/* For reference buf[0]:buf[3] baud rate value */
+	pl2303_encode_baud_rate(tty, port, &buf[0]);
+
+	/* For reference buf[4]=0 is 1 stop bits */
+	/* For reference buf[4]=1 is 1.5 stop bits */
+	/* For reference buf[4]=2 is 2 stop bits */
+	if (C_CSTOPB(tty)) {
+		/*
+		 * NOTE: Comply with "real" UARTs / RS232:
+		 *       use 1.5 instead of 2 stop bits with 5 data bits
+		 */
+		if (C_CSIZE(tty) == CS5) {
+			buf[4] = 1;
+			dev_dbg(&port->dev, "stop bits = 1.5\n");
+		} else {
+			buf[4] = 2;
+			dev_dbg(&port->dev, "stop bits = 2\n");
+		}
+	} else {
+		buf[4] = 0;
+		dev_dbg(&port->dev, "stop bits = 1\n");
+	}
+
+	if (C_PARENB(tty)) {
+		/* For reference buf[5]=0 is none parity */
+		/* For reference buf[5]=1 is odd parity */
+		/* For reference buf[5]=2 is even parity */
+		/* For reference buf[5]=3 is mark parity */
+		/* For reference buf[5]=4 is space parity */
+		if (C_PARODD(tty)) {
+			if (C_CMSPAR(tty)) {
+				buf[5] = 3;
+				dev_dbg(&port->dev, "parity = mark\n");
+			} else {
+				buf[5] = 1;
+				dev_dbg(&port->dev, "parity = odd\n");
+			}
+		} else {
+			if (C_CMSPAR(tty)) {
+				buf[5] = 4;
+				dev_dbg(&port->dev, "parity = space\n");
+			} else {
+				buf[5] = 2;
+				dev_dbg(&port->dev, "parity = even\n");
+			}
+		}
+	} else {
+		buf[5] = 0;
+		dev_dbg(&port->dev, "parity = none\n");
+	}
+
+	/*
+	 * Some PL2303 are known to lose bytes if you change serial settings
+	 * even to the same values as before. Thus we actually need to filter
+	 * in this specific case.
+	 *
+	 * Note that the tty_termios_hw_change check above is not sufficient
+	 * as a previously requested baud rate may differ from the one
+	 * actually used (and stored in old_termios).
+	 *
+	 * NOTE: No additional locking needed for line_settings as it is
+	 *       only used in set_termios, which is serialised against itself.
+	 */
+	if (!old_termios || memcmp(buf, priv->line_settings, 7)) {
+		ret = pl2303_set_line_request(port, buf);
+		if (!ret)
+			memcpy(priv->line_settings, buf, 7);
+	}
+
+	/* change control lines if we are switching to or from B0 */
+	spin_lock_irqsave(&priv->lock, flags);
+	control = priv->line_control;
+	if (C_BAUD(tty) == B0)
+		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+	else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+	if (control != priv->line_control) {
+		control = priv->line_control;
+		spin_unlock_irqrestore(&priv->lock, flags);
+		pl2303_set_control_lines(port, control);
+	} else {
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+
+	if (C_CRTSCTS(tty)) {
+		if (spriv->quirks & PL2303_QUIRK_LEGACY) {
+			pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0x40);
+		} else if (spriv->type == &pl2303_type_data[TYPE_HXN]) {
+			pl2303_update_reg(serial, PL2303_HXN_FLOWCTRL_REG,
+					PL2303_HXN_FLOWCTRL_MASK,
+					PL2303_HXN_FLOWCTRL_RTS_CTS);
+		} else {
+			pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0x60);
+		}
+	} else if (pl2303_enable_xonxoff(tty, spriv->type)) {
+		if (spriv->type == &pl2303_type_data[TYPE_HXN]) {
+			pl2303_update_reg(serial, PL2303_HXN_FLOWCTRL_REG,
+					PL2303_HXN_FLOWCTRL_MASK,
+					PL2303_HXN_FLOWCTRL_XON_XOFF);
+		} else {
+			pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0xc0);
+		}
+	} else {
+		if (spriv->type == &pl2303_type_data[TYPE_HXN]) {
+			pl2303_update_reg(serial, PL2303_HXN_FLOWCTRL_REG,
+					PL2303_HXN_FLOWCTRL_MASK,
+					PL2303_HXN_FLOWCTRL_NONE);
+		} else {
+			pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0);
+		}
+	}
+
+	kfree(buf);
+}
+
+static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (on)
+		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+	else
+		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	pl2303_set_control_lines(port, control);
+}
+
+static void pl2303_close(struct usb_serial_port *port)
+{
+	usb_serial_generic_close(port);
+	usb_kill_urb(port->interrupt_in_urb);
+	pl2303_set_break(port, false);
+}
+
+static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+	int result;
+
+	if (spriv->quirks & PL2303_QUIRK_LEGACY) {
+		usb_clear_halt(serial->dev, port->write_urb->pipe);
+		usb_clear_halt(serial->dev, port->read_urb->pipe);
+	} else {
+		/* reset upstream data pipes */
+		if (spriv->type == &pl2303_type_data[TYPE_HXN]) {
+			pl2303_vendor_write(serial, PL2303_HXN_RESET_REG,
+					PL2303_HXN_RESET_UPSTREAM_PIPE |
+					PL2303_HXN_RESET_DOWNSTREAM_PIPE);
+		} else {
+			pl2303_vendor_write(serial, 8, 0);
+			pl2303_vendor_write(serial, 9, 0);
+		}
+	}
+
+	/* Setup termios */
+	if (tty)
+		pl2303_set_termios(tty, port, NULL);
+
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (result) {
+		dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
+			result);
+		return result;
+	}
+
+	result = usb_serial_generic_open(tty, port);
+	if (result) {
+		usb_kill_urb(port->interrupt_in_urb);
+		return result;
+	}
+
+	return 0;
+}
+
+static int pl2303_tiocmset(struct tty_struct *tty,
+			   unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+	int ret;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (set & TIOCM_RTS)
+		priv->line_control |= CONTROL_RTS;
+	if (set & TIOCM_DTR)
+		priv->line_control |= CONTROL_DTR;
+	if (clear & TIOCM_RTS)
+		priv->line_control &= ~CONTROL_RTS;
+	if (clear & TIOCM_DTR)
+		priv->line_control &= ~CONTROL_DTR;
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	ret = pl2303_set_control_lines(port, control);
+	if (ret)
+		return usb_translate_errors(ret);
+
+	return 0;
+}
+
+static int pl2303_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned int mcr;
+	unsigned int status;
+	unsigned int result;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	mcr = priv->line_control;
+	status = priv->line_status;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	result = ((mcr & CONTROL_DTR)		? TIOCM_DTR : 0)
+		  | ((mcr & CONTROL_RTS)	? TIOCM_RTS : 0)
+		  | ((status & UART_CTS)	? TIOCM_CTS : 0)
+		  | ((status & UART_DSR)	? TIOCM_DSR : 0)
+		  | ((status & UART_RING)	? TIOCM_RI  : 0)
+		  | ((status & UART_DCD)	? TIOCM_CD  : 0);
+
+	dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
+
+	return result;
+}
+
+static int pl2303_carrier_raised(struct usb_serial_port *port)
+{
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+
+	if (priv->line_status & UART_DCD)
+		return 1;
+
+	return 0;
+}
+
+static void pl2303_set_break(struct usb_serial_port *port, bool enable)
+{
+	struct usb_serial *serial = port->serial;
+	u16 state;
+	int result;
+
+	if (enable)
+		state = BREAK_ON;
+	else
+		state = BREAK_OFF;
+
+	dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
+			state == BREAK_OFF ? "off" : "on");
+
+	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+				 BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
+				 0, NULL, 0, 100);
+	if (result)
+		dev_err(&port->dev, "error sending break = %d\n", result);
+}
+
+static void pl2303_break_ctl(struct tty_struct *tty, int state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	pl2303_set_break(port, state);
+}
+
+static void pl2303_update_line_status(struct usb_serial_port *port,
+				      unsigned char *data,
+				      unsigned int actual_length)
+{
+	struct usb_serial *serial = port->serial;
+	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	struct tty_struct *tty;
+	unsigned long flags;
+	unsigned int status_idx = UART_STATE_INDEX;
+	u8 status;
+	u8 delta;
+
+	if (spriv->quirks & PL2303_QUIRK_UART_STATE_IDX0)
+		status_idx = 0;
+
+	if (actual_length < status_idx + 1)
+		return;
+
+	status = data[status_idx];
+
+	/* Save off the uart status for others to look at */
+	spin_lock_irqsave(&priv->lock, flags);
+	delta = priv->line_status ^ status;
+	priv->line_status = status;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (status & UART_BREAK_ERROR)
+		usb_serial_handle_break(port);
+
+	if (delta & UART_STATE_MSR_MASK) {
+		if (delta & UART_CTS)
+			port->icount.cts++;
+		if (delta & UART_DSR)
+			port->icount.dsr++;
+		if (delta & UART_RING)
+			port->icount.rng++;
+		if (delta & UART_DCD) {
+			port->icount.dcd++;
+			tty = tty_port_tty_get(&port->port);
+			if (tty) {
+				usb_serial_handle_dcd_change(port, tty,
+							status & UART_DCD);
+				tty_kref_put(tty);
+			}
+		}
+
+		wake_up_interruptible(&port->port.delta_msr_wait);
+	}
+}
+
+static void pl2303_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port =  urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	unsigned int actual_length = urb->actual_length;
+	int status = urb->status;
+	int retval;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
+		return;
+	default:
+		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
+		goto exit;
+	}
+
+	usb_serial_debug_data(&port->dev, __func__,
+			      urb->actual_length, urb->transfer_buffer);
+
+	pl2303_update_line_status(port, data, actual_length);
+
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval) {
+		dev_err(&port->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
+	}
+}
+
+static void pl2303_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	unsigned char *data = urb->transfer_buffer;
+	char tty_flag = TTY_NORMAL;
+	unsigned long flags;
+	u8 line_status;
+	int i;
+
+	/* update line status */
+	spin_lock_irqsave(&priv->lock, flags);
+	line_status = priv->line_status;
+	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (!urb->actual_length)
+		return;
+
+	/*
+	 * Break takes precedence over parity, which takes precedence over
+	 * framing errors.
+	 */
+	if (line_status & UART_BREAK_ERROR)
+		tty_flag = TTY_BREAK;
+	else if (line_status & UART_PARITY_ERROR)
+		tty_flag = TTY_PARITY;
+	else if (line_status & UART_FRAME_ERROR)
+		tty_flag = TTY_FRAME;
+
+	if (tty_flag != TTY_NORMAL)
+		dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__,
+								tty_flag);
+	/* overrun is special, not associated with a char */
+	if (line_status & UART_OVERRUN_ERROR)
+		tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
+
+	if (port->sysrq) {
+		for (i = 0; i < urb->actual_length; ++i)
+			if (!usb_serial_handle_sysrq_char(port, data[i]))
+				tty_insert_flip_char(&port->port, data[i],
+						tty_flag);
+	} else {
+		tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
+							urb->actual_length);
+	}
+
+	tty_flip_buffer_push(&port->port);
+}
+
+static struct usb_serial_driver pl2303_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"pl2303",
+	},
+	.id_table =		id_table,
+	.num_bulk_in =		1,
+	.num_bulk_out =		1,
+	.num_interrupt_in =	0,	/* see pl2303_calc_num_ports */
+	.bulk_in_size =		256,
+	.bulk_out_size =	256,
+	.open =			pl2303_open,
+	.close =		pl2303_close,
+	.dtr_rts =		pl2303_dtr_rts,
+	.carrier_raised =	pl2303_carrier_raised,
+	.break_ctl =		pl2303_break_ctl,
+	.set_termios =		pl2303_set_termios,
+	.tiocmget =		pl2303_tiocmget,
+	.tiocmset =		pl2303_tiocmset,
+	.tiocmiwait =		usb_serial_generic_tiocmiwait,
+	.process_read_urb =	pl2303_process_read_urb,
+	.read_int_callback =	pl2303_read_int_callback,
+	.probe =		pl2303_probe,
+	.calc_num_ports =	pl2303_calc_num_ports,
+	.attach =		pl2303_startup,
+	.release =		pl2303_release,
+	.port_probe =		pl2303_port_probe,
+	.port_remove =		pl2303_port_remove,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&pl2303_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION("Prolific PL2303 USB to serial adaptor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
new file mode 100644
index 000000000..732f9b13a
--- /dev/null
+++ b/drivers/usb/serial/pl2303.h
@@ -0,0 +1,173 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Prolific PL2303 USB to serial adaptor driver header file
+ */
+
+#define BENQ_VENDOR_ID			0x04a5
+#define BENQ_PRODUCT_ID_S81		0x4027
+
+#define PL2303_VENDOR_ID	0x067b
+#define PL2303_PRODUCT_ID	0x2303
+#define PL2303_PRODUCT_ID_TB		0x2304
+#define PL2303_PRODUCT_ID_GC		0x23a3
+#define PL2303_PRODUCT_ID_GB		0x23b3
+#define PL2303_PRODUCT_ID_GT		0x23c3
+#define PL2303_PRODUCT_ID_GL		0x23d3
+#define PL2303_PRODUCT_ID_GE		0x23e3
+#define PL2303_PRODUCT_ID_GS		0x23f3
+#define PL2303_PRODUCT_ID_RSAQ2		0x04bb
+#define PL2303_PRODUCT_ID_DCU11		0x1234
+#define PL2303_PRODUCT_ID_PHAROS	0xaaa0
+#define PL2303_PRODUCT_ID_RSAQ3		0xaaa2
+#define PL2303_PRODUCT_ID_CHILITAG	0xaaa8
+#define PL2303_PRODUCT_ID_ALDIGA	0x0611
+#define PL2303_PRODUCT_ID_MMX		0x0612
+#define PL2303_PRODUCT_ID_GPRS		0x0609
+#define PL2303_PRODUCT_ID_HCR331	0x331a
+#define PL2303_PRODUCT_ID_MOTOROLA	0x0307
+#define PL2303_PRODUCT_ID_ZTEK		0xe1f1
+
+
+#define ATEN_VENDOR_ID		0x0557
+#define ATEN_VENDOR_ID2		0x0547
+#define ATEN_PRODUCT_ID		0x2008
+#define ATEN_PRODUCT_UC485	0x2021
+#define ATEN_PRODUCT_UC232B	0x2022
+#define ATEN_PRODUCT_ID2	0x2118
+
+#define IBM_VENDOR_ID		0x04b3
+#define IBM_PRODUCT_ID		0x4016
+
+#define IODATA_VENDOR_ID	0x04bb
+#define IODATA_PRODUCT_ID	0x0a03
+#define IODATA_PRODUCT_ID_RSAQ5	0x0a0e
+
+#define ELCOM_VENDOR_ID		0x056e
+#define ELCOM_PRODUCT_ID	0x5003
+#define ELCOM_PRODUCT_ID_UCSGT	0x5004
+
+#define ITEGNO_VENDOR_ID	0x0eba
+#define ITEGNO_PRODUCT_ID	0x1080
+#define ITEGNO_PRODUCT_ID_2080	0x2080
+
+#define MA620_VENDOR_ID		0x0df7
+#define MA620_PRODUCT_ID	0x0620
+
+#define RATOC_VENDOR_ID		0x0584
+#define RATOC_PRODUCT_ID	0xb000
+
+#define TRIPP_VENDOR_ID		0x2478
+#define TRIPP_PRODUCT_ID	0x2008
+
+#define RADIOSHACK_VENDOR_ID	0x1453
+#define RADIOSHACK_PRODUCT_ID	0x4026
+
+#define DCU10_VENDOR_ID		0x0731
+#define DCU10_PRODUCT_ID	0x0528
+
+#define SITECOM_VENDOR_ID	0x6189
+#define SITECOM_PRODUCT_ID	0x2068
+
+/* Alcatel OT535/735 USB cable */
+#define ALCATEL_VENDOR_ID	0x11f7
+#define ALCATEL_PRODUCT_ID	0x02df
+
+#define SIEMENS_VENDOR_ID	0x11f5
+#define SIEMENS_PRODUCT_ID_SX1	0x0001
+#define SIEMENS_PRODUCT_ID_X65	0x0003
+#define SIEMENS_PRODUCT_ID_X75	0x0004
+#define SIEMENS_PRODUCT_ID_EF81	0x0005
+
+#define SYNTECH_VENDOR_ID	0x0745
+#define SYNTECH_PRODUCT_ID	0x0001
+
+/* Nokia CA-42 Cable */
+#define NOKIA_CA42_VENDOR_ID	0x078b
+#define NOKIA_CA42_PRODUCT_ID	0x1234
+
+/* CA-42 CLONE Cable www.ca-42.com chipset: Prolific Technology Inc */
+#define CA_42_CA42_VENDOR_ID	0x10b5
+#define CA_42_CA42_PRODUCT_ID	0xac70
+
+#define SAGEM_VENDOR_ID		0x079b
+#define SAGEM_PRODUCT_ID	0x0027
+
+/* Leadtek GPS 9531 (ID 0413:2101) */
+#define LEADTEK_VENDOR_ID	0x0413
+#define LEADTEK_9531_PRODUCT_ID	0x2101
+
+/* USB GSM cable from Speed Dragon Multimedia, Ltd */
+#define SPEEDDRAGON_VENDOR_ID	0x0e55
+#define SPEEDDRAGON_PRODUCT_ID	0x110b
+
+/* DATAPILOT Universal-2 Phone Cable */
+#define DATAPILOT_U2_VENDOR_ID	0x0731
+#define DATAPILOT_U2_PRODUCT_ID	0x2003
+
+/* Belkin "F5U257" Serial Adapter */
+#define BELKIN_VENDOR_ID	0x050d
+#define BELKIN_PRODUCT_ID	0x0257
+
+/* Alcor Micro Corp. USB 2.0 TO RS-232 */
+#define ALCOR_VENDOR_ID		0x058F
+#define ALCOR_PRODUCT_ID	0x9720
+
+/* Willcom WS002IN Data Driver (by NetIndex Inc.) */
+#define WS002IN_VENDOR_ID	0x11f6
+#define WS002IN_PRODUCT_ID	0x2001
+
+/* Corega CG-USBRS232R Serial Adapter */
+#define COREGA_VENDOR_ID	0x07aa
+#define COREGA_PRODUCT_ID	0x002a
+
+/* Y.C. Cable U.S.A., Inc - USB to RS-232 */
+#define YCCABLE_VENDOR_ID	0x05ad
+#define YCCABLE_PRODUCT_ID	0x0fba
+
+/* "Superial" USB - Serial */
+#define SUPERIAL_VENDOR_ID	0x5372
+#define SUPERIAL_PRODUCT_ID	0x2303
+
+/* Hewlett-Packard POS Pole Displays */
+#define HP_VENDOR_ID		0x03f0
+#define HP_LD381GC_PRODUCT_ID	0x0183
+#define HP_LM920_PRODUCT_ID	0x026b
+#define HP_TD620_PRODUCT_ID	0x0956
+#define HP_LD960_PRODUCT_ID	0x0b39
+#define HP_LD381_PRODUCT_ID	0x0f7f
+#define HP_LM930_PRODUCT_ID	0x0f9b
+#define HP_LCM220_PRODUCT_ID	0x3139
+#define HP_LCM960_PRODUCT_ID	0x3239
+#define HP_LD220_PRODUCT_ID	0x3524
+#define HP_LD220TA_PRODUCT_ID	0x4349
+#define HP_LD960TA_PRODUCT_ID	0x4439
+#define HP_LM940_PRODUCT_ID	0x5039
+
+/* Cressi Edy (diving computer) PC interface */
+#define CRESSI_VENDOR_ID	0x04b8
+#define CRESSI_EDY_PRODUCT_ID	0x0521
+
+/* Zeagle dive computer interface */
+#define ZEAGLE_VENDOR_ID	0x04b8
+#define ZEAGLE_N2ITION3_PRODUCT_ID	0x0522
+
+/* Sony, USB data cable for CMD-Jxx mobile phones */
+#define SONY_VENDOR_ID		0x054c
+#define SONY_QN3USB_PRODUCT_ID	0x0437
+
+/* Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) */
+#define SANWA_VENDOR_ID		0x11ad
+#define SANWA_PRODUCT_ID	0x0001
+
+/* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
+#define ADLINK_VENDOR_ID		0x0b63
+#define ADLINK_ND6530_PRODUCT_ID	0x6530
+#define ADLINK_ND6530GC_PRODUCT_ID	0x653a
+
+/* SMART USB Serial Adapter */
+#define SMART_VENDOR_ID	0x0b8c
+#define SMART_PRODUCT_ID	0x2303
+
+/* Allied Telesis VT-Kit3 */
+#define AT_VENDOR_ID		0x0caa
+#define AT_VTKIT3_PRODUCT_ID	0x3001
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
new file mode 100644
index 000000000..929ffba66
--- /dev/null
+++ b/drivers/usb/serial/qcaux.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Qualcomm USB Auxiliary Serial Port driver
+ *
+ * Copyright (C) 2008 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (C) 2010 Dan Williams <dcbw@redhat.com>
+ *
+ * Devices listed here usually provide a CDC ACM port on which normal modem
+ * AT commands and PPP can be used.  But when that port is in-use by PPP it
+ * cannot be used simultaneously for status or signal strength.  Instead, the
+ * ports here can be queried for that information using the Qualcomm DM
+ * protocol.
+ */
+
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+/* NOTE: for now, only use this driver for devices that provide a CDC-ACM port
+ * for normal AT commands, but also provide secondary USB interfaces for the
+ * QCDM-capable ports.  Devices that do not provide a CDC-ACM port should
+ * probably be driven by option.ko.
+ */
+
+/* UTStarcom/Pantech/Curitel devices */
+#define UTSTARCOM_VENDOR_ID			0x106c
+#define UTSTARCOM_PRODUCT_PC5740		0x3701
+#define UTSTARCOM_PRODUCT_PC5750		0x3702 /* aka Pantech PX-500 */
+#define UTSTARCOM_PRODUCT_UM150			0x3711
+#define UTSTARCOM_PRODUCT_UM175_V1		0x3712
+#define UTSTARCOM_PRODUCT_UM175_V2		0x3714
+#define UTSTARCOM_PRODUCT_UM175_ALLTEL		0x3715
+
+/* CMOTECH devices */
+#define CMOTECH_VENDOR_ID			0x16d8
+#define CMOTECH_PRODUCT_CDU550			0x5553
+#define CMOTECH_PRODUCT_CDX650			0x6512
+
+/* LG devices */
+#define LG_VENDOR_ID				0x1004
+#define LG_PRODUCT_VX4400_6000			0x6000 /* VX4400/VX6000/Rumor */
+
+/* Sanyo devices */
+#define SANYO_VENDOR_ID				0x0474
+#define SANYO_PRODUCT_KATANA_LX			0x0754 /* SCP-3800 (Katana LX) */
+
+/* Samsung devices */
+#define SAMSUNG_VENDOR_ID			0x04e8
+#define SAMSUNG_PRODUCT_U520			0x6640 /* SCH-U520 */
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5740, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5750, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM150, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V1, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V2, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_ALLTEL, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU550, 0xff, 0xff, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDX650, 0xff, 0xff, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfd, 0xff) },  /* NMEA */
+	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfe, 0xff) },  /* WMC */
+	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xff, 0xff) },  /* DIAG */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1fac, 0x0151, 0xff, 0xff, 0xff) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_serial_driver qcaux_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"qcaux",
+	},
+	.id_table =		id_table,
+	.num_ports =		1,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&qcaux_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
new file mode 100644
index 000000000..b1e844bf3
--- /dev/null
+++ b/drivers/usb/serial/qcserial.c
@@ -0,0 +1,488 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Qualcomm Serial USB driver
+ *
+ *	Copyright (c) 2008 QUALCOMM Incorporated.
+ *	Copyright (c) 2009 Greg Kroah-Hartman <gregkh@suse.de>
+ *	Copyright (c) 2009 Novell Inc.
+ */
+
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/slab.h>
+#include "usb-wwan.h"
+
+#define DRIVER_AUTHOR "Qualcomm Inc"
+#define DRIVER_DESC "Qualcomm USB Serial driver"
+
+#define QUECTEL_EC20_PID	0x9215
+
+/* standard device layouts supported by this driver */
+enum qcserial_layouts {
+	QCSERIAL_G2K = 0,	/* Gobi 2000 */
+	QCSERIAL_G1K = 1,	/* Gobi 1000 */
+	QCSERIAL_SWI = 2,	/* Sierra Wireless */
+	QCSERIAL_HWI = 3,	/* Huawei */
+};
+
+#define DEVICE_G1K(v, p) \
+	USB_DEVICE(v, p), .driver_info = QCSERIAL_G1K
+#define DEVICE_SWI(v, p) \
+	USB_DEVICE(v, p), .driver_info = QCSERIAL_SWI
+#define DEVICE_HWI(v, p) \
+	USB_DEVICE(v, p), .driver_info = QCSERIAL_HWI
+
+static const struct usb_device_id id_table[] = {
+	/* Gobi 1000 devices */
+	{DEVICE_G1K(0x05c6, 0x9211)},	/* Acer Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
+	{DEVICE_G1K(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
+	{DEVICE_G1K(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
+	{DEVICE_G1K(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
+	{DEVICE_G1K(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
+	{DEVICE_G1K(0x413c, 0x8172)},	/* Dell Gobi Modem device */
+	{DEVICE_G1K(0x413c, 0x8171)},	/* Dell Gobi QDL device */
+	{DEVICE_G1K(0x1410, 0xa001)},	/* Novatel/Verizon USB-1000 */
+	{DEVICE_G1K(0x1410, 0xa002)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa003)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa004)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa005)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa006)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa007)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
+	{DEVICE_G1K(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
+	{DEVICE_G1K(0x0b05, 0x1774)},	/* Asus Gobi QDL device */
+	{DEVICE_G1K(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
+	{DEVICE_G1K(0x19d2, 0xfff2)},	/* ONDA Gobi QDL device */
+	{DEVICE_G1K(0x1557, 0x0a80)},	/* OQO Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9008)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9009)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9201)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
+	{DEVICE_G1K(0x1bc7, 0x900e)},	/* Telit Gobi QDL device */
+
+	/* Gobi 2000 devices */
+	{USB_DEVICE(0x1410, 0xa010)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa011)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa012)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa013)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa014)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x413c, 0x8185)},	/* Dell Gobi 2000 QDL device (N0218, VU936) */
+	{USB_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */
+	{USB_DEVICE(0x05c6, 0x9208)},	/* Generic Gobi 2000 QDL device */
+	{USB_DEVICE(0x05c6, 0x920b)},	/* Generic Gobi 2000 Modem device */
+	{USB_DEVICE(0x05c6, 0x9224)},	/* Sony Gobi 2000 QDL device (N0279, VU730) */
+	{USB_DEVICE(0x05c6, 0x9225)},	/* Sony Gobi 2000 Modem device (N0279, VU730) */
+	{USB_DEVICE(0x05c6, 0x9244)},	/* Samsung Gobi 2000 QDL device (VL176) */
+	{USB_DEVICE(0x05c6, 0x9245)},	/* Samsung Gobi 2000 Modem device (VL176) */
+	{USB_DEVICE(0x03f0, 0x241d)},	/* HP Gobi 2000 QDL device (VP412) */
+	{USB_DEVICE(0x03f0, 0x251d)},	/* HP Gobi 2000 Modem device (VP412) */
+	{USB_DEVICE(0x05c6, 0x9214)},	/* Acer Gobi 2000 QDL device (VP413) */
+	{USB_DEVICE(0x05c6, 0x9215)},	/* Acer Gobi 2000 Modem device (VP413) */
+	{USB_DEVICE(0x05c6, 0x9264)},	/* Asus Gobi 2000 QDL device (VR305) */
+	{USB_DEVICE(0x05c6, 0x9265)},	/* Asus Gobi 2000 Modem device (VR305) */
+	{USB_DEVICE(0x05c6, 0x9234)},	/* Top Global Gobi 2000 QDL device (VR306) */
+	{USB_DEVICE(0x05c6, 0x9235)},	/* Top Global Gobi 2000 Modem device (VR306) */
+	{USB_DEVICE(0x05c6, 0x9274)},	/* iRex Technologies Gobi 2000 QDL device (VR307) */
+	{USB_DEVICE(0x05c6, 0x9275)},	/* iRex Technologies Gobi 2000 Modem device (VR307) */
+	{USB_DEVICE(0x1199, 0x9000)},	/* Sierra Wireless Gobi 2000 QDL device (VT773) */
+	{USB_DEVICE(0x1199, 0x9001)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9002)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9003)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9004)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9005)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9006)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9007)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9008)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9009)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x900a)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{USB_DEVICE(0x1199, 0x9011)},   /* Sierra Wireless Gobi 2000 Modem device (MC8305) */
+	{USB_DEVICE(0x16d8, 0x8001)},	/* CMDTech Gobi 2000 QDL device (VU922) */
+	{USB_DEVICE(0x16d8, 0x8002)},	/* CMDTech Gobi 2000 Modem device (VU922) */
+	{USB_DEVICE(0x05c6, 0x9204)},	/* Gobi 2000 QDL device */
+	{USB_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */
+
+	/* Gobi 3000 devices */
+	{USB_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Gobi 3000 QDL */
+	{USB_DEVICE(0x05c6, 0x920c)},	/* Gobi 3000 QDL */
+	{USB_DEVICE(0x05c6, 0x920d)},	/* Gobi 3000 Composite */
+	{USB_DEVICE(0x1410, 0xa020)},   /* Novatel Gobi 3000 QDL */
+	{USB_DEVICE(0x1410, 0xa021)},	/* Novatel Gobi 3000 Composite */
+	{USB_DEVICE(0x413c, 0x8193)},	/* Dell Gobi 3000 QDL */
+	{USB_DEVICE(0x413c, 0x8194)},	/* Dell Gobi 3000 Composite */
+	{USB_DEVICE(0x413c, 0x81a6)},	/* Dell DW5570 QDL (MC8805) */
+	{USB_DEVICE(0x1199, 0x68a4)},	/* Sierra Wireless QDL */
+	{USB_DEVICE(0x1199, 0x68a5)},	/* Sierra Wireless Modem */
+	{USB_DEVICE(0x1199, 0x68a8)},	/* Sierra Wireless QDL */
+	{USB_DEVICE(0x1199, 0x68a9)},	/* Sierra Wireless Modem */
+	{USB_DEVICE(0x1199, 0x9010)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9012)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9013)},	/* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+	{USB_DEVICE(0x1199, 0x9014)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9015)},	/* Sierra Wireless Gobi 3000 Modem device */
+	{USB_DEVICE(0x1199, 0x9018)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9019)},	/* Sierra Wireless Gobi 3000 Modem device */
+	{USB_DEVICE(0x1199, 0x901b)},	/* Sierra Wireless MC7770 */
+	{USB_DEVICE(0x12D1, 0x14F0)},	/* Sony Gobi 3000 QDL */
+	{USB_DEVICE(0x12D1, 0x14F1)},	/* Sony Gobi 3000 Composite */
+	{USB_DEVICE(0x0AF0, 0x8120)},	/* Option GTM681W */
+
+	/* non-Gobi Sierra Wireless devices */
+	{DEVICE_SWI(0x03f0, 0x4e1d)},	/* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
+	{DEVICE_SWI(0x0f3d, 0x68a2)},	/* Sierra Wireless MC7700 */
+	{DEVICE_SWI(0x114f, 0x68a2)},	/* Sierra Wireless MC7750 */
+	{DEVICE_SWI(0x1199, 0x68a2)},	/* Sierra Wireless MC7710 */
+	{DEVICE_SWI(0x1199, 0x68c0)},	/* Sierra Wireless MC7304/MC7354 */
+	{DEVICE_SWI(0x1199, 0x901c)},	/* Sierra Wireless EM7700 */
+	{DEVICE_SWI(0x1199, 0x901e)},	/* Sierra Wireless EM7355 QDL */
+	{DEVICE_SWI(0x1199, 0x901f)},	/* Sierra Wireless EM7355 */
+	{DEVICE_SWI(0x1199, 0x9040)},	/* Sierra Wireless Modem */
+	{DEVICE_SWI(0x1199, 0x9041)},	/* Sierra Wireless MC7305/MC7355 */
+	{DEVICE_SWI(0x1199, 0x9051)},	/* Netgear AirCard 340U */
+	{DEVICE_SWI(0x1199, 0x9053)},	/* Sierra Wireless Modem */
+	{DEVICE_SWI(0x1199, 0x9054)},	/* Sierra Wireless Modem */
+	{DEVICE_SWI(0x1199, 0x9055)},	/* Netgear AirCard 341U */
+	{DEVICE_SWI(0x1199, 0x9056)},	/* Sierra Wireless Modem */
+	{DEVICE_SWI(0x1199, 0x9060)},	/* Sierra Wireless Modem */
+	{DEVICE_SWI(0x1199, 0x9061)},	/* Sierra Wireless Modem */
+	{DEVICE_SWI(0x1199, 0x9062)},	/* Sierra Wireless EM7305 QDL */
+	{DEVICE_SWI(0x1199, 0x9063)},	/* Sierra Wireless EM7305 */
+	{DEVICE_SWI(0x1199, 0x9070)},	/* Sierra Wireless MC74xx */
+	{DEVICE_SWI(0x1199, 0x9071)},	/* Sierra Wireless MC74xx */
+	{DEVICE_SWI(0x1199, 0x9078)},	/* Sierra Wireless EM74xx */
+	{DEVICE_SWI(0x1199, 0x9079)},	/* Sierra Wireless EM74xx */
+	{DEVICE_SWI(0x1199, 0x907a)},	/* Sierra Wireless EM74xx QDL */
+	{DEVICE_SWI(0x1199, 0x907b)},	/* Sierra Wireless EM74xx */
+	{DEVICE_SWI(0x1199, 0x9090)},	/* Sierra Wireless EM7565 QDL */
+	{DEVICE_SWI(0x1199, 0x9091)},	/* Sierra Wireless EM7565 */
+	{DEVICE_SWI(0x1199, 0x90d2)},	/* Sierra Wireless EM9191 QDL */
+	{DEVICE_SWI(0x1199, 0xc080)},	/* Sierra Wireless EM7590 QDL */
+	{DEVICE_SWI(0x1199, 0xc081)},	/* Sierra Wireless EM7590 */
+	{DEVICE_SWI(0x413c, 0x81a2)},	/* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
+	{DEVICE_SWI(0x413c, 0x81a3)},	/* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
+	{DEVICE_SWI(0x413c, 0x81a4)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
+	{DEVICE_SWI(0x413c, 0x81a8)},	/* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
+	{DEVICE_SWI(0x413c, 0x81a9)},	/* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
+	{DEVICE_SWI(0x413c, 0x81b1)},	/* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */
+	{DEVICE_SWI(0x413c, 0x81b3)},	/* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
+	{DEVICE_SWI(0x413c, 0x81b5)},	/* Dell Wireless 5811e QDL */
+	{DEVICE_SWI(0x413c, 0x81b6)},	/* Dell Wireless 5811e QDL */
+	{DEVICE_SWI(0x413c, 0x81c2)},	/* Dell Wireless 5811e */
+	{DEVICE_SWI(0x413c, 0x81cb)},	/* Dell Wireless 5816e QDL */
+	{DEVICE_SWI(0x413c, 0x81cc)},	/* Dell Wireless 5816e */
+	{DEVICE_SWI(0x413c, 0x81cf)},   /* Dell Wireless 5819 */
+	{DEVICE_SWI(0x413c, 0x81d0)},   /* Dell Wireless 5819 */
+	{DEVICE_SWI(0x413c, 0x81d1)},   /* Dell Wireless 5818 */
+	{DEVICE_SWI(0x413c, 0x81d2)},   /* Dell Wireless 5818 */
+
+	/* Huawei devices */
+	{DEVICE_HWI(0x03f0, 0x581d)},	/* HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) */
+
+	{ }				/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static int handle_quectel_ec20(struct device *dev, int ifnum)
+{
+	int altsetting = 0;
+
+	/*
+	 * Quectel EC20 Mini PCIe LTE module layout:
+	 * 0: DM/DIAG (use libqcdm from ModemManager for communication)
+	 * 1: NMEA
+	 * 2: AT-capable modem port
+	 * 3: Modem interface
+	 * 4: NDIS
+	 */
+	switch (ifnum) {
+	case 0:
+		dev_dbg(dev, "Quectel EC20 DM/DIAG interface found\n");
+		break;
+	case 1:
+		dev_dbg(dev, "Quectel EC20 NMEA GPS interface found\n");
+		break;
+	case 2:
+	case 3:
+		dev_dbg(dev, "Quectel EC20 Modem port found\n");
+		break;
+	case 4:
+		/* Don't claim the QMI/net interface */
+		altsetting = -1;
+		break;
+	}
+
+	return altsetting;
+}
+
+static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
+{
+	struct usb_host_interface *intf = serial->interface->cur_altsetting;
+	struct device *dev = &serial->dev->dev;
+	int retval = -ENODEV;
+	__u8 nintf;
+	__u8 ifnum;
+	int altsetting = -1;
+	bool sendsetup = false;
+
+	/* we only support vendor specific functions */
+	if (intf->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
+		goto done;
+
+	nintf = serial->dev->actconfig->desc.bNumInterfaces;
+	dev_dbg(dev, "Num Interfaces = %d\n", nintf);
+	ifnum = intf->desc.bInterfaceNumber;
+	dev_dbg(dev, "This Interface = %d\n", ifnum);
+
+	if (nintf == 1) {
+		/* QDL mode */
+		/* Gobi 2000 has a single altsetting, older ones have two */
+		if (serial->interface->num_altsetting == 2)
+			intf = usb_altnum_to_altsetting(serial->interface, 1);
+		else if (serial->interface->num_altsetting > 2)
+			goto done;
+
+		if (intf && intf->desc.bNumEndpoints == 2 &&
+		    usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
+		    usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
+			dev_dbg(dev, "QDL port found\n");
+
+			if (serial->interface->num_altsetting == 1)
+				retval = 0; /* Success */
+			else
+				altsetting = 1;
+		}
+		goto done;
+
+	}
+
+	/* default to enabling interface */
+	altsetting = 0;
+
+	/*
+	 * Composite mode; don't bind to the QMI/net interface as that
+	 * gets handled by other drivers.
+	 */
+
+	switch (id->driver_info) {
+	case QCSERIAL_G1K:
+		/*
+		 * Gobi 1K USB layout:
+		 * 0: DM/DIAG (use libqcdm from ModemManager for communication)
+		 * 1: serial port (doesn't respond)
+		 * 2: AT-capable modem port
+		 * 3: QMI/net
+		 */
+		if (nintf < 3 || nintf > 4) {
+			dev_err(dev, "unknown number of interfaces: %d\n", nintf);
+			altsetting = -1;
+			goto done;
+		}
+
+		if (ifnum == 0) {
+			dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n");
+			altsetting = 1;
+		} else if (ifnum == 2)
+			dev_dbg(dev, "Modem port found\n");
+		else
+			altsetting = -1;
+		break;
+	case QCSERIAL_G2K:
+		/* handle non-standard layouts */
+		if (nintf == 5 && id->idProduct == QUECTEL_EC20_PID) {
+			altsetting = handle_quectel_ec20(dev, ifnum);
+			goto done;
+		}
+
+		/*
+		 * Gobi 2K+ USB layout:
+		 * 0: QMI/net
+		 * 1: DM/DIAG (use libqcdm from ModemManager for communication)
+		 * 2: AT-capable modem port
+		 * 3: NMEA
+		 */
+		if (nintf < 3 || nintf > 4) {
+			dev_err(dev, "unknown number of interfaces: %d\n", nintf);
+			altsetting = -1;
+			goto done;
+		}
+
+		switch (ifnum) {
+		case 0:
+			/* Don't claim the QMI/net interface */
+			altsetting = -1;
+			break;
+		case 1:
+			dev_dbg(dev, "Gobi 2K+ DM/DIAG interface found\n");
+			break;
+		case 2:
+			dev_dbg(dev, "Modem port found\n");
+			break;
+		case 3:
+			/*
+			 * NMEA (serial line 9600 8N1)
+			 * # echo "\$GPS_START" > /dev/ttyUSBx
+			 * # echo "\$GPS_STOP"  > /dev/ttyUSBx
+			 */
+			dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n");
+			break;
+		}
+		break;
+	case QCSERIAL_SWI:
+		/*
+		 * Sierra Wireless layout:
+		 * 0: DM/DIAG (use libqcdm from ModemManager for communication)
+		 * 2: NMEA
+		 * 3: AT-capable modem port
+		 * 8: QMI/net
+		 */
+		switch (ifnum) {
+		case 0:
+			dev_dbg(dev, "DM/DIAG interface found\n");
+			break;
+		case 2:
+			dev_dbg(dev, "NMEA GPS interface found\n");
+			sendsetup = true;
+			break;
+		case 3:
+			dev_dbg(dev, "Modem port found\n");
+			sendsetup = true;
+			break;
+		default:
+			/* don't claim any unsupported interface */
+			altsetting = -1;
+			break;
+		}
+		break;
+	case QCSERIAL_HWI:
+		/*
+		 * Huawei devices map functions by subclass + protocol
+		 * instead of interface numbers. The protocol identify
+		 * a specific function, while the subclass indicate a
+		 * specific firmware source
+		 *
+		 * This is a list of functions known to be non-serial.  The rest
+		 * are assumed to be serial and will be handled by this driver
+		 */
+		switch (intf->desc.bInterfaceProtocol) {
+			/* QMI combined (qmi_wwan) */
+		case 0x07:
+		case 0x37:
+		case 0x67:
+			/* QMI data (qmi_wwan) */
+		case 0x08:
+		case 0x38:
+		case 0x68:
+			/* QMI control (qmi_wwan) */
+		case 0x09:
+		case 0x39:
+		case 0x69:
+			/* NCM like (huawei_cdc_ncm) */
+		case 0x16:
+		case 0x46:
+		case 0x76:
+			altsetting = -1;
+			break;
+		default:
+			dev_dbg(dev, "Huawei type serial port found (%02x/%02x/%02x)\n",
+				intf->desc.bInterfaceClass,
+				intf->desc.bInterfaceSubClass,
+				intf->desc.bInterfaceProtocol);
+		}
+		break;
+	default:
+		dev_err(dev, "unsupported device layout type: %lu\n",
+			id->driver_info);
+		break;
+	}
+
+done:
+	if (altsetting >= 0) {
+		retval = usb_set_interface(serial->dev, ifnum, altsetting);
+		if (retval < 0) {
+			dev_err(dev,
+				"Could not set interface, error %d\n",
+				retval);
+			retval = -ENODEV;
+		}
+	}
+
+	if (!retval)
+		usb_set_serial_data(serial, (void *)(unsigned long)sendsetup);
+
+	return retval;
+}
+
+static int qc_attach(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *data;
+	bool sendsetup;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	sendsetup = !!(unsigned long)(usb_get_serial_data(serial));
+	if (sendsetup)
+		data->use_send_setup = 1;
+
+	spin_lock_init(&data->susp_lock);
+
+	usb_set_serial_data(serial, data);
+
+	return 0;
+}
+
+static void qc_release(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
+
+	usb_set_serial_data(serial, NULL);
+	kfree(priv);
+}
+
+static struct usb_serial_driver qcdevice = {
+	.driver = {
+		.owner     = THIS_MODULE,
+		.name      = "qcserial",
+	},
+	.description         = "Qualcomm USB modem",
+	.id_table            = id_table,
+	.num_ports           = 1,
+	.probe               = qcprobe,
+	.open		     = usb_wwan_open,
+	.close		     = usb_wwan_close,
+	.dtr_rts	     = usb_wwan_dtr_rts,
+	.write		     = usb_wwan_write,
+	.write_room	     = usb_wwan_write_room,
+	.chars_in_buffer     = usb_wwan_chars_in_buffer,
+	.tiocmget            = usb_wwan_tiocmget,
+	.tiocmset            = usb_wwan_tiocmset,
+	.attach              = qc_attach,
+	.release	     = qc_release,
+	.port_probe          = usb_wwan_port_probe,
+	.port_remove	     = usb_wwan_port_remove,
+#ifdef CONFIG_PM
+	.suspend	     = usb_wwan_suspend,
+	.resume		     = usb_wwan_resume,
+#endif
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&qcdevice, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
new file mode 100644
index 000000000..6fca40ace
--- /dev/null
+++ b/drivers/usb/serial/quatech2.c
@@ -0,0 +1,962 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * usb-serial driver for Quatech USB 2 devices
+ *
+ * Copyright (C) 2012 Bill Pemberton (wfp5p@virginia.edu)
+ *
+ *  These devices all have only 1 bulk in and 1 bulk out that is shared
+ *  for all serial ports.
+ *
+ */
+
+#include <asm/unaligned.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/uaccess.h>
+
+/* default urb timeout for usb operations */
+#define QT2_USB_TIMEOUT USB_CTRL_SET_TIMEOUT
+
+#define QT_OPEN_CLOSE_CHANNEL       0xca
+#define QT_SET_GET_DEVICE           0xc2
+#define QT_SET_GET_REGISTER         0xc0
+#define QT_GET_SET_PREBUF_TRIG_LVL  0xcc
+#define QT_SET_ATF                  0xcd
+#define QT_TRANSFER_IN              0xc0
+#define QT_HW_FLOW_CONTROL_MASK     0xc5
+#define QT_SW_FLOW_CONTROL_MASK     0xc6
+#define QT2_BREAK_CONTROL	    0xc8
+#define QT2_GET_SET_UART            0xc1
+#define QT2_FLUSH_DEVICE	    0xc4
+#define QT2_GET_SET_QMCR            0xe1
+#define QT2_QMCR_RS232              0x40
+#define QT2_QMCR_RS422              0x10
+
+#define  SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS)
+
+#define  SERIAL_EVEN_PARITY         (UART_LCR_PARITY | UART_LCR_EPAR)
+
+/* status bytes for the device */
+#define QT2_CONTROL_BYTE    0x1b
+#define QT2_LINE_STATUS     0x00  /* following 1 byte is line status */
+#define QT2_MODEM_STATUS    0x01  /* following 1 byte is modem status */
+#define QT2_XMIT_HOLD       0x02  /* following 2 bytes are ?? */
+#define QT2_CHANGE_PORT     0x03  /* following 1 byte is port to change to */
+#define QT2_REC_FLUSH       0x04  /* no following info */
+#define QT2_XMIT_FLUSH      0x05  /* no following info */
+#define QT2_CONTROL_ESCAPE  0xff  /* pass through previous 2 control bytes */
+
+#define  MAX_BAUD_RATE              921600
+#define  DEFAULT_BAUD_RATE          9600
+
+#define QT2_READ_BUFFER_SIZE    512  /* size of read buffer */
+#define QT2_WRITE_BUFFER_SIZE   512  /* size of write buffer */
+#define QT2_WRITE_CONTROL_SIZE  5    /* control bytes used for a write */
+
+#define DRIVER_DESC "Quatech 2nd gen USB to Serial Driver"
+
+#define	USB_VENDOR_ID_QUATECH	0x061d
+#define QUATECH_SSU2_100	0xC120	/* RS232 single port */
+#define QUATECH_DSU2_100	0xC140	/* RS232 dual port */
+#define QUATECH_DSU2_400	0xC150	/* RS232/422/485 dual port */
+#define QUATECH_QSU2_100	0xC160	/* RS232 four port */
+#define QUATECH_QSU2_400	0xC170	/* RS232/422/485 four port */
+#define QUATECH_ESU2_100	0xC1A0	/* RS232 eight port */
+#define QUATECH_ESU2_400	0xC180	/* RS232/422/485 eight port */
+
+struct qt2_device_detail {
+	int product_id;
+	int num_ports;
+};
+
+#define QT_DETAILS(prod, ports)	\
+	.product_id = (prod),   \
+	.num_ports = (ports)
+
+static const struct qt2_device_detail qt2_device_details[] = {
+	{QT_DETAILS(QUATECH_SSU2_100, 1)},
+	{QT_DETAILS(QUATECH_DSU2_400, 2)},
+	{QT_DETAILS(QUATECH_DSU2_100, 2)},
+	{QT_DETAILS(QUATECH_QSU2_400, 4)},
+	{QT_DETAILS(QUATECH_QSU2_100, 4)},
+	{QT_DETAILS(QUATECH_ESU2_400, 8)},
+	{QT_DETAILS(QUATECH_ESU2_100, 8)},
+	{QT_DETAILS(0, 0)}	/* Terminating entry */
+};
+
+static const struct usb_device_id id_table[] = {
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU2_100)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_100)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_400)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_100)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_400)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_100)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_400)},
+	{}			/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct qt2_serial_private {
+	unsigned char current_port;  /* current port for incoming data */
+
+	struct urb	*read_urb;   /* shared among all ports */
+	char		*read_buffer;
+};
+
+struct qt2_port_private {
+	u8   device_port;
+
+	spinlock_t urb_lock;
+	bool       urb_in_use;
+	struct urb *write_urb;
+	char       *write_buffer;
+
+	spinlock_t  lock;
+	u8          shadowLSR;
+	u8          shadowMSR;
+
+	struct usb_serial_port *port;
+};
+
+static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch);
+static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch);
+static void qt2_write_bulk_callback(struct urb *urb);
+static void qt2_read_bulk_callback(struct urb *urb);
+
+static void qt2_release(struct usb_serial *serial)
+{
+	struct qt2_serial_private *serial_priv;
+
+	serial_priv = usb_get_serial_data(serial);
+
+	usb_kill_urb(serial_priv->read_urb);
+	usb_free_urb(serial_priv->read_urb);
+	kfree(serial_priv->read_buffer);
+	kfree(serial_priv);
+}
+
+static inline int calc_baud_divisor(int baudrate)
+{
+	int divisor, rem;
+
+	divisor = MAX_BAUD_RATE / baudrate;
+	rem = MAX_BAUD_RATE % baudrate;
+	/* Round to nearest divisor */
+	if (((rem * 2) >= baudrate) && (baudrate != 110))
+		divisor++;
+
+	return divisor;
+}
+
+static inline int qt2_set_port_config(struct usb_device *dev,
+				      unsigned char port_number,
+				      u16 baudrate, u16 lcr)
+{
+	int divisor = calc_baud_divisor(baudrate);
+	u16 index = ((u16) (lcr << 8) | (u16) (port_number));
+
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			       QT2_GET_SET_UART, 0x40,
+			       divisor, index, NULL, 0, QT2_USB_TIMEOUT);
+}
+
+static inline int qt2_control_msg(struct usb_device *dev,
+				  u8 request, u16 data, u16 index)
+{
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			       request, 0x40, data, index,
+			       NULL, 0, QT2_USB_TIMEOUT);
+}
+
+static inline int qt2_setdevice(struct usb_device *dev, u8 *data)
+{
+	u16 x = ((u16) (data[1] << 8) | (u16) (data[0]));
+
+	return qt2_control_msg(dev, QT_SET_GET_DEVICE, x, 0);
+}
+
+
+static inline int qt2_getregister(struct usb_device *dev,
+				  u8 uart,
+				  u8 reg,
+				  u8 *data)
+{
+	int ret;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      QT_SET_GET_REGISTER, 0xc0, reg,
+			      uart, data, sizeof(*data), QT2_USB_TIMEOUT);
+	if (ret < (int)sizeof(*data)) {
+		if (ret >= 0)
+			ret = -EIO;
+	}
+
+	return ret;
+}
+
+static inline int qt2_setregister(struct usb_device *dev,
+				  u8 uart, u8 reg, u16 data)
+{
+	u16 value = (data << 8) | reg;
+
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			       QT_SET_GET_REGISTER, 0x40, value, uart,
+			       NULL, 0, QT2_USB_TIMEOUT);
+}
+
+static inline int update_mctrl(struct qt2_port_private *port_priv,
+			       unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = port_priv->port;
+	struct usb_device *dev = port->serial->dev;
+	unsigned urb_value;
+	int status;
+
+	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
+		dev_dbg(&port->dev,
+			"update_mctrl - DTR|RTS not being set|cleared\n");
+		return 0;	/* no change */
+	}
+
+	clear &= ~set;	/* 'set' takes precedence over 'clear' */
+	urb_value = 0;
+	if (set & TIOCM_DTR)
+		urb_value |= UART_MCR_DTR;
+	if (set & TIOCM_RTS)
+		urb_value |= UART_MCR_RTS;
+
+	status = qt2_setregister(dev, port_priv->device_port, UART_MCR,
+				 urb_value);
+	if (status < 0)
+		dev_err(&port->dev,
+			"update_mctrl - Error from MODEM_CTRL urb: %i\n",
+			status);
+	return status;
+}
+
+static int qt2_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds)
+{
+	struct qt2_device_detail d;
+	int i;
+
+	for (i = 0; d = qt2_device_details[i], d.product_id != 0; i++) {
+		if (d.product_id == le16_to_cpu(serial->dev->descriptor.idProduct))
+			return d.num_ports;
+	}
+
+	/* we didn't recognize the device */
+	dev_err(&serial->dev->dev,
+		 "don't know the number of ports, assuming 1\n");
+
+	return 1;
+}
+
+static void qt2_set_termios(struct tty_struct *tty,
+		            struct usb_serial_port *port,
+		            const struct ktermios *old_termios)
+{
+	struct usb_device *dev = port->serial->dev;
+	struct qt2_port_private *port_priv;
+	struct ktermios *termios = &tty->termios;
+	u16 baud;
+	unsigned int cflag = termios->c_cflag;
+	u16 new_lcr = 0;
+	int status;
+
+	port_priv = usb_get_serial_port_data(port);
+
+	if (cflag & PARENB) {
+		if (cflag & PARODD)
+			new_lcr |= UART_LCR_PARITY;
+		else
+			new_lcr |= SERIAL_EVEN_PARITY;
+	}
+
+	new_lcr |= UART_LCR_WLEN(tty_get_char_size(cflag));
+
+	baud = tty_get_baud_rate(tty);
+	if (!baud)
+		baud = 9600;
+
+	status = qt2_set_port_config(dev, port_priv->device_port, baud,
+				     new_lcr);
+	if (status < 0)
+		dev_err(&port->dev, "%s - qt2_set_port_config failed: %i\n",
+			__func__, status);
+
+	if (cflag & CRTSCTS)
+		status = qt2_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
+					 SERIAL_CRTSCTS,
+					 port_priv->device_port);
+	else
+		status = qt2_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
+					 0, port_priv->device_port);
+	if (status < 0)
+		dev_err(&port->dev, "%s - set HW flow control failed: %i\n",
+			__func__, status);
+
+	if (I_IXOFF(tty) || I_IXON(tty)) {
+		u16 x = ((u16) (START_CHAR(tty) << 8) | (u16) (STOP_CHAR(tty)));
+
+		status = qt2_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
+					 x, port_priv->device_port);
+	} else
+		status = qt2_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
+					 0, port_priv->device_port);
+
+	if (status < 0)
+		dev_err(&port->dev, "%s - set SW flow control failed: %i\n",
+			__func__, status);
+
+}
+
+static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_serial *serial;
+	struct qt2_port_private *port_priv;
+	u8 *data;
+	u16 device_port;
+	int status;
+	unsigned long flags;
+
+	device_port = port->port_number;
+
+	serial = port->serial;
+
+	port_priv = usb_get_serial_port_data(port);
+
+	/* set the port to RS232 mode */
+	status = qt2_control_msg(serial->dev, QT2_GET_SET_QMCR,
+				 QT2_QMCR_RS232, device_port);
+	if (status < 0) {
+		dev_err(&port->dev,
+			"%s failed to set RS232 mode for port %i error %i\n",
+			__func__, device_port, status);
+		return status;
+	}
+
+	data = kzalloc(2, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	/* open the port */
+	status = usb_control_msg(serial->dev,
+				 usb_rcvctrlpipe(serial->dev, 0),
+				 QT_OPEN_CLOSE_CHANNEL,
+				 0xc0, 0,
+				 device_port, data, 2, QT2_USB_TIMEOUT);
+
+	if (status < 2) {
+		dev_err(&port->dev, "%s - open port failed %i\n", __func__,
+			status);
+		if (status >= 0)
+			status = -EIO;
+		kfree(data);
+		return status;
+	}
+
+	spin_lock_irqsave(&port_priv->lock, flags);
+	port_priv->shadowLSR = data[0];
+	port_priv->shadowMSR = data[1];
+	spin_unlock_irqrestore(&port_priv->lock, flags);
+
+	kfree(data);
+
+	/* set to default speed and 8bit word size */
+	status = qt2_set_port_config(serial->dev, device_port,
+				     DEFAULT_BAUD_RATE, UART_LCR_WLEN8);
+	if (status < 0) {
+		dev_err(&port->dev, "%s - initial setup failed (%i)\n",
+			__func__, device_port);
+		return status;
+	}
+
+	port_priv->device_port = (u8) device_port;
+
+	if (tty)
+		qt2_set_termios(tty, port, &tty->termios);
+
+	return 0;
+
+}
+
+static void qt2_close(struct usb_serial_port *port)
+{
+	struct usb_serial *serial;
+	struct qt2_port_private *port_priv;
+	int i;
+
+	serial = port->serial;
+	port_priv = usb_get_serial_port_data(port);
+
+	usb_kill_urb(port_priv->write_urb);
+
+	/* flush the port transmit buffer */
+	i = usb_control_msg(serial->dev,
+			    usb_sndctrlpipe(serial->dev, 0),
+			    QT2_FLUSH_DEVICE, 0x40, 1,
+			    port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
+
+	if (i < 0)
+		dev_err(&port->dev, "%s - transmit buffer flush failed: %i\n",
+			__func__, i);
+
+	/* flush the port receive buffer */
+	i = usb_control_msg(serial->dev,
+			    usb_sndctrlpipe(serial->dev, 0),
+			    QT2_FLUSH_DEVICE, 0x40, 0,
+			    port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
+
+	if (i < 0)
+		dev_err(&port->dev, "%s - receive buffer flush failed: %i\n",
+			__func__, i);
+
+	/* close the port */
+	i = usb_control_msg(serial->dev,
+			    usb_sndctrlpipe(serial->dev, 0),
+			    QT_OPEN_CLOSE_CHANNEL,
+			    0x40, 0,
+			    port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
+
+	if (i < 0)
+		dev_err(&port->dev, "%s - close port failed %i\n",
+			__func__, i);
+}
+
+static void qt2_disconnect(struct usb_serial *serial)
+{
+	struct qt2_serial_private *serial_priv = usb_get_serial_data(serial);
+
+	usb_kill_urb(serial_priv->read_urb);
+}
+
+static void qt2_process_status(struct usb_serial_port *port, unsigned char *ch)
+{
+	switch (*ch) {
+	case QT2_LINE_STATUS:
+		qt2_update_lsr(port, ch + 1);
+		break;
+	case QT2_MODEM_STATUS:
+		qt2_update_msr(port, ch + 1);
+		break;
+	}
+}
+
+static void qt2_process_read_urb(struct urb *urb)
+{
+	struct usb_serial *serial;
+	struct qt2_serial_private *serial_priv;
+	struct usb_serial_port *port;
+	bool escapeflag;
+	unsigned char *ch;
+	int i;
+	unsigned char newport;
+	int len = urb->actual_length;
+
+	if (!len)
+		return;
+
+	ch = urb->transfer_buffer;
+	serial = urb->context;
+	serial_priv = usb_get_serial_data(serial);
+	port = serial->port[serial_priv->current_port];
+
+	for (i = 0; i < urb->actual_length; i++) {
+		ch = (unsigned char *)urb->transfer_buffer + i;
+		if ((i <= (len - 3)) &&
+		    (*ch == QT2_CONTROL_BYTE) &&
+		    (*(ch + 1) == QT2_CONTROL_BYTE)) {
+			escapeflag = false;
+			switch (*(ch + 2)) {
+			case QT2_LINE_STATUS:
+			case QT2_MODEM_STATUS:
+				if (i > (len - 4)) {
+					dev_warn(&port->dev,
+						 "%s - status message too short\n",
+						__func__);
+					break;
+				}
+				qt2_process_status(port, ch + 2);
+				i += 3;
+				escapeflag = true;
+				break;
+			case QT2_XMIT_HOLD:
+				if (i > (len - 5)) {
+					dev_warn(&port->dev,
+						 "%s - xmit_empty message too short\n",
+						 __func__);
+					break;
+				}
+				/* bytes_written = (ch[1] << 4) + ch[0]; */
+				i += 4;
+				escapeflag = true;
+				break;
+			case QT2_CHANGE_PORT:
+				if (i > (len - 4)) {
+					dev_warn(&port->dev,
+						 "%s - change_port message too short\n",
+						 __func__);
+					break;
+				}
+				tty_flip_buffer_push(&port->port);
+
+				newport = *(ch + 3);
+
+				if (newport > serial->num_ports) {
+					dev_err(&port->dev,
+						"%s - port change to invalid port: %i\n",
+						__func__, newport);
+					break;
+				}
+
+				serial_priv->current_port = newport;
+				port = serial->port[serial_priv->current_port];
+				i += 3;
+				escapeflag = true;
+				break;
+			case QT2_REC_FLUSH:
+			case QT2_XMIT_FLUSH:
+				i += 2;
+				escapeflag = true;
+				break;
+			case QT2_CONTROL_ESCAPE:
+				tty_insert_flip_string(&port->port, ch, 2);
+				i += 2;
+				escapeflag = true;
+				break;
+			default:
+				dev_warn(&port->dev,
+					 "%s - unsupported command %i\n",
+					 __func__, *(ch + 2));
+				break;
+			}
+			if (escapeflag)
+				continue;
+		}
+
+		tty_insert_flip_char(&port->port, *ch, TTY_NORMAL);
+	}
+
+	tty_flip_buffer_push(&port->port);
+}
+
+static void qt2_write_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port;
+	struct qt2_port_private *port_priv;
+	unsigned long flags;
+
+	port = urb->context;
+	port_priv = usb_get_serial_port_data(port);
+
+	spin_lock_irqsave(&port_priv->urb_lock, flags);
+
+	port_priv->urb_in_use = false;
+	usb_serial_port_softint(port);
+
+	spin_unlock_irqrestore(&port_priv->urb_lock, flags);
+
+}
+
+static void qt2_read_bulk_callback(struct urb *urb)
+{
+	struct usb_serial *serial = urb->context;
+	int status;
+
+	if (urb->status) {
+		dev_warn(&serial->dev->dev,
+			 "%s - non-zero urb status: %i\n", __func__,
+			 urb->status);
+		return;
+	}
+
+	qt2_process_read_urb(urb);
+
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status != 0)
+		dev_err(&serial->dev->dev,
+			"%s - resubmit read urb failed: %i\n",
+			__func__, status);
+}
+
+static int qt2_setup_urbs(struct usb_serial *serial)
+{
+	struct usb_serial_port *port0;
+	struct qt2_serial_private *serial_priv;
+	int status;
+
+	port0 = serial->port[0];
+
+	serial_priv = usb_get_serial_data(serial);
+	serial_priv->read_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!serial_priv->read_urb)
+		return -ENOMEM;
+
+	usb_fill_bulk_urb(serial_priv->read_urb, serial->dev,
+			  usb_rcvbulkpipe(serial->dev,
+					  port0->bulk_in_endpointAddress),
+			  serial_priv->read_buffer,
+			  QT2_READ_BUFFER_SIZE,
+			  qt2_read_bulk_callback, serial);
+
+	status = usb_submit_urb(serial_priv->read_urb, GFP_KERNEL);
+	if (status != 0) {
+		dev_err(&serial->dev->dev,
+			"%s - submit read urb failed %i\n", __func__, status);
+		usb_free_urb(serial_priv->read_urb);
+		return status;
+	}
+
+	return 0;
+}
+
+static int qt2_attach(struct usb_serial *serial)
+{
+	struct qt2_serial_private *serial_priv;
+	int status;
+
+	/* power on unit */
+	status = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+				 0xc2, 0x40, 0x8000, 0, NULL, 0,
+				 QT2_USB_TIMEOUT);
+	if (status < 0) {
+		dev_err(&serial->dev->dev,
+			"%s - failed to power on unit: %i\n", __func__, status);
+		return status;
+	}
+
+	serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
+	if (!serial_priv)
+		return -ENOMEM;
+
+	serial_priv->read_buffer = kmalloc(QT2_READ_BUFFER_SIZE, GFP_KERNEL);
+	if (!serial_priv->read_buffer) {
+		status = -ENOMEM;
+		goto err_buf;
+	}
+
+	usb_set_serial_data(serial, serial_priv);
+
+	status = qt2_setup_urbs(serial);
+	if (status != 0)
+		goto attach_failed;
+
+	return 0;
+
+attach_failed:
+	kfree(serial_priv->read_buffer);
+err_buf:
+	kfree(serial_priv);
+	return status;
+}
+
+static int qt2_port_probe(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct qt2_port_private *port_priv;
+	u8 bEndpointAddress;
+
+	port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
+	if (!port_priv)
+		return -ENOMEM;
+
+	spin_lock_init(&port_priv->lock);
+	spin_lock_init(&port_priv->urb_lock);
+	port_priv->port = port;
+
+	port_priv->write_buffer = kmalloc(QT2_WRITE_BUFFER_SIZE, GFP_KERNEL);
+	if (!port_priv->write_buffer)
+		goto err_buf;
+
+	port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!port_priv->write_urb)
+		goto err_urb;
+
+	bEndpointAddress = serial->port[0]->bulk_out_endpointAddress;
+	usb_fill_bulk_urb(port_priv->write_urb, serial->dev,
+				usb_sndbulkpipe(serial->dev, bEndpointAddress),
+				port_priv->write_buffer,
+				QT2_WRITE_BUFFER_SIZE,
+				qt2_write_bulk_callback, port);
+
+	usb_set_serial_port_data(port, port_priv);
+
+	return 0;
+err_urb:
+	kfree(port_priv->write_buffer);
+err_buf:
+	kfree(port_priv);
+	return -ENOMEM;
+}
+
+static void qt2_port_remove(struct usb_serial_port *port)
+{
+	struct qt2_port_private *port_priv;
+
+	port_priv = usb_get_serial_port_data(port);
+	usb_free_urb(port_priv->write_urb);
+	kfree(port_priv->write_buffer);
+	kfree(port_priv);
+}
+
+static int qt2_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_device *dev = port->serial->dev;
+	struct qt2_port_private *port_priv = usb_get_serial_port_data(port);
+	u8 *d;
+	int r;
+
+	d = kzalloc(2, GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	r = qt2_getregister(dev, port_priv->device_port, UART_MCR, d);
+	if (r < 0)
+		goto mget_out;
+
+	r = qt2_getregister(dev, port_priv->device_port, UART_MSR, d + 1);
+	if (r < 0)
+		goto mget_out;
+
+	r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) |
+	    (d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) |
+	    (d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) |
+	    (d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) |
+	    (d[1] & UART_MSR_RI ? TIOCM_RI : 0) |
+	    (d[1] & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+mget_out:
+	kfree(d);
+	return r;
+}
+
+static int qt2_tiocmset(struct tty_struct *tty,
+			unsigned int set, unsigned int clear)
+{
+	struct qt2_port_private *port_priv;
+
+	port_priv = usb_get_serial_port_data(tty->driver_data);
+	return update_mctrl(port_priv, set, clear);
+}
+
+static void qt2_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct qt2_port_private *port_priv;
+	int status;
+	u16 val;
+
+	port_priv = usb_get_serial_port_data(port);
+
+	val = (break_state == -1) ? 1 : 0;
+
+	status = qt2_control_msg(port->serial->dev, QT2_BREAK_CONTROL,
+				 val, port_priv->device_port);
+	if (status < 0)
+		dev_warn(&port->dev,
+			 "%s - failed to send control message: %i\n", __func__,
+			 status);
+}
+
+
+
+static void qt2_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_device *dev = port->serial->dev;
+	struct qt2_port_private *port_priv = usb_get_serial_port_data(port);
+
+	/* Disable flow control */
+	if (!on) {
+		if (qt2_setregister(dev, port_priv->device_port,
+					   UART_MCR, 0) < 0)
+			dev_warn(&port->dev, "error from flowcontrol urb\n");
+	}
+	/* drop RTS and DTR */
+	if (on)
+		update_mctrl(port_priv, TIOCM_DTR | TIOCM_RTS, 0);
+	else
+		update_mctrl(port_priv, 0, TIOCM_DTR | TIOCM_RTS);
+}
+
+static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch)
+{
+	struct qt2_port_private *port_priv;
+	u8 newMSR = (u8) *ch;
+	unsigned long flags;
+
+	/* May be called from qt2_process_read_urb() for an unbound port. */
+	port_priv = usb_get_serial_port_data(port);
+	if (!port_priv)
+		return;
+
+	spin_lock_irqsave(&port_priv->lock, flags);
+	port_priv->shadowMSR = newMSR;
+	spin_unlock_irqrestore(&port_priv->lock, flags);
+
+	if (newMSR & UART_MSR_ANY_DELTA) {
+		/* update input line counters */
+		if (newMSR & UART_MSR_DCTS)
+			port->icount.cts++;
+		if (newMSR & UART_MSR_DDSR)
+			port->icount.dsr++;
+		if (newMSR & UART_MSR_DDCD)
+			port->icount.dcd++;
+		if (newMSR & UART_MSR_TERI)
+			port->icount.rng++;
+
+		wake_up_interruptible(&port->port.delta_msr_wait);
+	}
+}
+
+static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch)
+{
+	struct qt2_port_private *port_priv;
+	struct async_icount *icount;
+	unsigned long flags;
+	u8 newLSR = (u8) *ch;
+
+	/* May be called from qt2_process_read_urb() for an unbound port. */
+	port_priv = usb_get_serial_port_data(port);
+	if (!port_priv)
+		return;
+
+	if (newLSR & UART_LSR_BI)
+		newLSR &= (u8) (UART_LSR_OE | UART_LSR_BI);
+
+	spin_lock_irqsave(&port_priv->lock, flags);
+	port_priv->shadowLSR = newLSR;
+	spin_unlock_irqrestore(&port_priv->lock, flags);
+
+	icount = &port->icount;
+
+	if (newLSR & UART_LSR_BRK_ERROR_BITS) {
+
+		if (newLSR & UART_LSR_BI)
+			icount->brk++;
+
+		if (newLSR & UART_LSR_OE)
+			icount->overrun++;
+
+		if (newLSR & UART_LSR_PE)
+			icount->parity++;
+
+		if (newLSR & UART_LSR_FE)
+			icount->frame++;
+	}
+
+}
+
+static unsigned int qt2_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct qt2_port_private *port_priv;
+	unsigned long flags;
+	unsigned int r;
+
+	port_priv = usb_get_serial_port_data(port);
+
+	spin_lock_irqsave(&port_priv->urb_lock, flags);
+
+	if (port_priv->urb_in_use)
+		r = 0;
+	else
+		r = QT2_WRITE_BUFFER_SIZE - QT2_WRITE_CONTROL_SIZE;
+
+	spin_unlock_irqrestore(&port_priv->urb_lock, flags);
+
+	return r;
+}
+
+static int qt2_write(struct tty_struct *tty,
+		     struct usb_serial_port *port,
+		     const unsigned char *buf, int count)
+{
+	struct qt2_port_private *port_priv;
+	struct urb *write_urb;
+	unsigned char *data;
+	unsigned long flags;
+	int status;
+	int bytes_out = 0;
+
+	port_priv = usb_get_serial_port_data(port);
+
+	if (port_priv->write_urb == NULL) {
+		dev_err(&port->dev, "%s - no output urb\n", __func__);
+		return 0;
+	}
+	write_urb = port_priv->write_urb;
+
+	count = min(count, QT2_WRITE_BUFFER_SIZE - QT2_WRITE_CONTROL_SIZE);
+
+	data = write_urb->transfer_buffer;
+	spin_lock_irqsave(&port_priv->urb_lock, flags);
+	if (port_priv->urb_in_use) {
+		dev_err(&port->dev, "qt2_write - urb is in use\n");
+		goto write_out;
+	}
+
+	*data++ = QT2_CONTROL_BYTE;
+	*data++ = QT2_CONTROL_BYTE;
+	*data++ = port_priv->device_port;
+	put_unaligned_le16(count, data);
+	data += 2;
+	memcpy(data, buf, count);
+
+	write_urb->transfer_buffer_length = count + QT2_WRITE_CONTROL_SIZE;
+
+	status = usb_submit_urb(write_urb, GFP_ATOMIC);
+	if (status == 0) {
+		port_priv->urb_in_use = true;
+		bytes_out += count;
+	}
+
+write_out:
+	spin_unlock_irqrestore(&port_priv->urb_lock, flags);
+	return bytes_out;
+}
+
+
+static struct usb_serial_driver qt2_device = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "quatech-serial",
+	},
+	.description	     = DRIVER_DESC,
+	.id_table	     = id_table,
+	.open		     = qt2_open,
+	.close		     = qt2_close,
+	.write               = qt2_write,
+	.write_room          = qt2_write_room,
+	.calc_num_ports      = qt2_calc_num_ports,
+	.attach              = qt2_attach,
+	.release             = qt2_release,
+	.disconnect          = qt2_disconnect,
+	.port_probe          = qt2_port_probe,
+	.port_remove         = qt2_port_remove,
+	.dtr_rts             = qt2_dtr_rts,
+	.break_ctl           = qt2_break_ctl,
+	.tiocmget            = qt2_tiocmget,
+	.tiocmset            = qt2_tiocmset,
+	.tiocmiwait          = usb_serial_generic_tiocmiwait,
+	.get_icount	     = usb_serial_generic_get_icount,
+	.set_termios         = qt2_set_termios,
+};
+
+static struct usb_serial_driver *const serial_drivers[] = {
+	&qt2_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
new file mode 100644
index 000000000..6accbecb6
--- /dev/null
+++ b/drivers/usb/serial/safe_serial.c
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Safe Encapsulated USB Serial Driver
+ *
+ *      Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
+ *      Copyright (C) 2001 Lineo
+ *      Copyright (C) 2001 Hewlett-Packard
+ *
+ * By:
+ *      Stuart Lynne <sl@lineo.com>, Tom Rushworth <tbr@lineo.com>
+ */
+
+/*
+ * The encapsultaion is designed to overcome difficulties with some USB
+ * hardware.
+ *
+ * While the USB protocol has a CRC over the data while in transit, i.e. while
+ * being carried over the bus, there is no end to end protection. If the
+ * hardware has any problems getting the data into or out of the USB transmit
+ * and receive FIFO's then data can be lost.
+ *
+ * This protocol adds a two byte trailer to each USB packet to specify the
+ * number of bytes of valid data and a 10 bit CRC that will allow the receiver
+ * to verify that the entire USB packet was received without error.
+ *
+ * Because in this case the sender and receiver are the class and function
+ * drivers there is now end to end protection.
+ *
+ * There is an additional option that can be used to force all transmitted
+ * packets to be padded to the maximum packet size. This provides a work
+ * around for some devices which have problems with small USB packets.
+ *
+ * Assuming a packetsize of N:
+ *
+ *      0..N-2  data and optional padding
+ *
+ *      N-2     bits 7-2 - number of bytes of valid data
+ *              bits 1-0 top two bits of 10 bit CRC
+ *      N-1     bottom 8 bits of 10 bit CRC
+ *
+ *
+ *      | Data Length       | 10 bit CRC                                |
+ *      + 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 | 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 +
+ *
+ * The 10 bit CRC is computed across the sent data, followed by the trailer
+ * with the length set and the CRC set to zero. The CRC is then OR'd into
+ * the trailer.
+ *
+ * When received a 10 bit CRC is computed over the entire frame including
+ * the trailer and should be equal to zero.
+ *
+ * Two module parameters are used to control the encapsulation, if both are
+ * turned of the module works as a simple serial device with NO
+ * encapsulation.
+ *
+ * See linux/drivers/usbd/serial_fd for a device function driver
+ * implementation of this.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/gfp.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static bool safe = true;
+static bool padded = IS_ENABLED(CONFIG_USB_SERIAL_SAFE_PADDED);
+
+#define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com, Johan Hovold <jhovold@gmail.com>"
+#define DRIVER_DESC "USB Safe Encapsulated Serial"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(safe, bool, 0);
+MODULE_PARM_DESC(safe, "Turn Safe Encapsulation On/Off");
+
+module_param(padded, bool, 0);
+MODULE_PARM_DESC(padded, "Pad to full wMaxPacketSize On/Off");
+
+#define CDC_DEVICE_CLASS                        0x02
+
+#define CDC_INTERFACE_CLASS                     0x02
+#define CDC_INTERFACE_SUBCLASS                  0x06
+
+#define LINEO_INTERFACE_CLASS                   0xff
+
+#define LINEO_INTERFACE_SUBCLASS_SAFENET        0x01
+#define LINEO_SAFENET_CRC                       0x01
+#define LINEO_SAFENET_CRC_PADDED                0x02
+
+#define LINEO_INTERFACE_SUBCLASS_SAFESERIAL     0x02
+#define LINEO_SAFESERIAL_CRC                    0x01
+#define LINEO_SAFESERIAL_CRC_PADDED             0x02
+
+
+#define MY_USB_DEVICE(vend, prod, dc, ic, isc) \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+		       USB_DEVICE_ID_MATCH_DEV_CLASS | \
+		       USB_DEVICE_ID_MATCH_INT_CLASS | \
+		       USB_DEVICE_ID_MATCH_INT_SUBCLASS, \
+	.idVendor = (vend), \
+	.idProduct = (prod),\
+	.bDeviceClass = (dc),\
+	.bInterfaceClass = (ic), \
+	.bInterfaceSubClass = (isc),
+
+static const struct usb_device_id id_table[] = {
+	{MY_USB_DEVICE(0x49f, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Itsy */
+	{MY_USB_DEVICE(0x3f0, 0x2101, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Calypso */
+	{MY_USB_DEVICE(0x4dd, 0x8001, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Iris */
+	{MY_USB_DEVICE(0x4dd, 0x8002, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Collie */
+	{MY_USB_DEVICE(0x4dd, 0x8003, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Collie */
+	{MY_USB_DEVICE(0x4dd, 0x8004, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Collie */
+	{MY_USB_DEVICE(0x5f9, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Sharp tmp */
+	{}			/* terminating entry  */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static const __u16 crc10_table[256] = {
+	0x000, 0x233, 0x255, 0x066, 0x299, 0x0aa, 0x0cc, 0x2ff,
+	0x301, 0x132, 0x154, 0x367, 0x198, 0x3ab, 0x3cd, 0x1fe,
+	0x031, 0x202, 0x264, 0x057, 0x2a8, 0x09b, 0x0fd, 0x2ce,
+	0x330, 0x103, 0x165, 0x356, 0x1a9, 0x39a, 0x3fc, 0x1cf,
+	0x062, 0x251, 0x237, 0x004, 0x2fb, 0x0c8, 0x0ae, 0x29d,
+	0x363, 0x150, 0x136, 0x305, 0x1fa, 0x3c9, 0x3af, 0x19c,
+	0x053, 0x260, 0x206, 0x035, 0x2ca, 0x0f9, 0x09f, 0x2ac,
+	0x352, 0x161, 0x107, 0x334, 0x1cb, 0x3f8, 0x39e, 0x1ad,
+	0x0c4, 0x2f7, 0x291, 0x0a2, 0x25d, 0x06e, 0x008, 0x23b,
+	0x3c5, 0x1f6, 0x190, 0x3a3, 0x15c, 0x36f, 0x309, 0x13a,
+	0x0f5, 0x2c6, 0x2a0, 0x093, 0x26c, 0x05f, 0x039, 0x20a,
+	0x3f4, 0x1c7, 0x1a1, 0x392, 0x16d, 0x35e, 0x338, 0x10b,
+	0x0a6, 0x295, 0x2f3, 0x0c0, 0x23f, 0x00c, 0x06a, 0x259,
+	0x3a7, 0x194, 0x1f2, 0x3c1, 0x13e, 0x30d, 0x36b, 0x158,
+	0x097, 0x2a4, 0x2c2, 0x0f1, 0x20e, 0x03d, 0x05b, 0x268,
+	0x396, 0x1a5, 0x1c3, 0x3f0, 0x10f, 0x33c, 0x35a, 0x169,
+	0x188, 0x3bb, 0x3dd, 0x1ee, 0x311, 0x122, 0x144, 0x377,
+	0x289, 0x0ba, 0x0dc, 0x2ef, 0x010, 0x223, 0x245, 0x076,
+	0x1b9, 0x38a, 0x3ec, 0x1df, 0x320, 0x113, 0x175, 0x346,
+	0x2b8, 0x08b, 0x0ed, 0x2de, 0x021, 0x212, 0x274, 0x047,
+	0x1ea, 0x3d9, 0x3bf, 0x18c, 0x373, 0x140, 0x126, 0x315,
+	0x2eb, 0x0d8, 0x0be, 0x28d, 0x072, 0x241, 0x227, 0x014,
+	0x1db, 0x3e8, 0x38e, 0x1bd, 0x342, 0x171, 0x117, 0x324,
+	0x2da, 0x0e9, 0x08f, 0x2bc, 0x043, 0x270, 0x216, 0x025,
+	0x14c, 0x37f, 0x319, 0x12a, 0x3d5, 0x1e6, 0x180, 0x3b3,
+	0x24d, 0x07e, 0x018, 0x22b, 0x0d4, 0x2e7, 0x281, 0x0b2,
+	0x17d, 0x34e, 0x328, 0x11b, 0x3e4, 0x1d7, 0x1b1, 0x382,
+	0x27c, 0x04f, 0x029, 0x21a, 0x0e5, 0x2d6, 0x2b0, 0x083,
+	0x12e, 0x31d, 0x37b, 0x148, 0x3b7, 0x184, 0x1e2, 0x3d1,
+	0x22f, 0x01c, 0x07a, 0x249, 0x0b6, 0x285, 0x2e3, 0x0d0,
+	0x11f, 0x32c, 0x34a, 0x179, 0x386, 0x1b5, 0x1d3, 0x3e0,
+	0x21e, 0x02d, 0x04b, 0x278, 0x087, 0x2b4, 0x2d2, 0x0e1,
+};
+
+#define CRC10_INITFCS     0x000	/* Initial FCS value */
+#define CRC10_GOODFCS     0x000	/* Good final FCS value */
+#define CRC10_FCS(fcs, c) ((((fcs) << 8) & 0x3ff) ^ crc10_table[((fcs) >> 2) & 0xff] ^ (c))
+
+/**
+ * fcs_compute10 - memcpy and calculate 10 bit CRC across buffer
+ * @sp: pointer to buffer
+ * @len: number of bytes
+ * @fcs: starting FCS
+ *
+ * Perform a memcpy and calculate fcs using ppp 10bit CRC algorithm. Return
+ * new 10 bit FCS.
+ */
+static inline __u16 fcs_compute10(unsigned char *sp, int len, __u16 fcs)
+{
+	for (; len-- > 0; fcs = CRC10_FCS(fcs, *sp++));
+	return fcs;
+}
+
+static void safe_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	unsigned char length = urb->actual_length;
+	int actual_length;
+	__u16 fcs;
+
+	if (!length)
+		return;
+
+	if (!safe)
+		goto out;
+
+	if (length < 2) {
+		dev_err(&port->dev, "malformed packet\n");
+		return;
+	}
+
+	fcs = fcs_compute10(data, length, CRC10_INITFCS);
+	if (fcs) {
+		dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs);
+		return;
+	}
+
+	actual_length = data[length - 2] >> 2;
+	if (actual_length > (length - 2)) {
+		dev_err(&port->dev, "%s - inconsistent lengths %d:%d\n",
+				__func__, actual_length, length);
+		return;
+	}
+	dev_info(&urb->dev->dev, "%s - actual: %d\n", __func__, actual_length);
+	length = actual_length;
+out:
+	tty_insert_flip_string(&port->port, data, length);
+	tty_flip_buffer_push(&port->port);
+}
+
+static int safe_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
+{
+	unsigned char *buf = dest;
+	int count;
+	int trailer_len;
+	int pkt_len;
+	__u16 fcs;
+
+	trailer_len = safe ? 2 : 0;
+
+	count = kfifo_out_locked(&port->write_fifo, buf, size - trailer_len,
+								&port->lock);
+	if (!safe)
+		return count;
+
+	/* pad if necessary */
+	if (padded) {
+		pkt_len = size;
+		memset(buf + count, '0', pkt_len - count - trailer_len);
+	} else {
+		pkt_len = count + trailer_len;
+	}
+
+	/* set count */
+	buf[pkt_len - 2] = count << 2;
+	buf[pkt_len - 1] = 0;
+
+	/* compute fcs and insert into trailer */
+	fcs = fcs_compute10(buf, pkt_len, CRC10_INITFCS);
+	buf[pkt_len - 2] |= fcs >> 8;
+	buf[pkt_len - 1] |= fcs & 0xff;
+
+	return pkt_len;
+}
+
+static int safe_startup(struct usb_serial *serial)
+{
+	struct usb_interface_descriptor	*desc;
+
+	if (serial->dev->descriptor.bDeviceClass != CDC_DEVICE_CLASS)
+		return -ENODEV;
+
+	desc = &serial->interface->cur_altsetting->desc;
+
+	if (desc->bInterfaceClass != LINEO_INTERFACE_CLASS)
+		return -ENODEV;
+	if (desc->bInterfaceSubClass != LINEO_INTERFACE_SUBCLASS_SAFESERIAL)
+		return -ENODEV;
+
+	switch (desc->bInterfaceProtocol) {
+	case LINEO_SAFESERIAL_CRC:
+		break;
+	case LINEO_SAFESERIAL_CRC_PADDED:
+		padded = true;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static struct usb_serial_driver safe_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"safe_serial",
+	},
+	.id_table =		id_table,
+	.num_ports =		1,
+	.process_read_urb =	safe_process_read_urb,
+	.prepare_write_buffer =	safe_prepare_write_buffer,
+	.attach =		safe_startup,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&safe_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
new file mode 100644
index 000000000..353b2549e
--- /dev/null
+++ b/drivers/usb/serial/sierra.c
@@ -0,0 +1,1059 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+  USB Driver for Sierra Wireless
+
+  Copyright (C) 2006, 2007, 2008  Kevin Lloyd <klloyd@sierrawireless.com>,
+
+  Copyright (C) 2008, 2009  Elina Pasheva, Matthew Safar, Rory Filer
+			<linux@sierrawireless.com>
+
+  IMPORTANT DISCLAIMER: This driver is not commercially supported by
+  Sierra Wireless. Use at your own risk.
+
+  Portions based on the option driver by Matthias Urlichs <smurf@smurf.noris.de>
+  Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
+*/
+/* Uncomment to log function calls */
+/* #define DEBUG */
+
+#define DRIVER_AUTHOR "Kevin Lloyd, Elina Pasheva, Matthew Safar, Rory Filer"
+#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
+
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define SWIMS_USB_REQUEST_SetPower	0x00
+#define SWIMS_USB_REQUEST_SetNmea	0x07
+
+#define N_IN_URB_HM	8
+#define N_OUT_URB_HM	64
+#define N_IN_URB	4
+#define N_OUT_URB	4
+#define IN_BUFLEN	4096
+
+#define MAX_TRANSFER		(PAGE_SIZE - 512)
+/* MAX_TRANSFER is chosen so that the VM is not stressed by
+   allocations > PAGE_SIZE and the number of packets in a page
+   is an integer 512 is the largest possible packet on EHCI */
+
+static bool nmea;
+
+struct sierra_iface_list {
+	const u8 *nums;		/* array of interface numbers */
+	size_t count;		/* number of elements in array */
+};
+
+struct sierra_intf_private {
+	spinlock_t susp_lock;
+	unsigned int suspended:1;
+	int in_flight;
+	unsigned int open_ports;
+};
+
+static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
+{
+	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			SWIMS_USB_REQUEST_SetPower,	/* __u8 request      */
+			USB_TYPE_VENDOR,		/* __u8 request type */
+			swiState,			/* __u16 value       */
+			0,				/* __u16 index       */
+			NULL,				/* void *data        */
+			0,				/* __u16 size 	     */
+			USB_CTRL_SET_TIMEOUT);		/* int timeout 	     */
+}
+
+static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable)
+{
+	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			SWIMS_USB_REQUEST_SetNmea,	/* __u8 request      */
+			USB_TYPE_VENDOR,		/* __u8 request type */
+			enable,				/* __u16 value       */
+			0x0000,				/* __u16 index       */
+			NULL,				/* void *data        */
+			0,				/* __u16 size 	     */
+			USB_CTRL_SET_TIMEOUT);		/* int timeout       */
+}
+
+static int sierra_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds)
+{
+	int num_ports = 0;
+	u8 ifnum, numendpoints;
+
+	ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+	numendpoints = serial->interface->cur_altsetting->desc.bNumEndpoints;
+
+	/* Dummy interface present on some SKUs should be ignored */
+	if (ifnum == 0x99)
+		num_ports = 0;
+	else if (numendpoints <= 3)
+		num_ports = 1;
+	else
+		num_ports = (numendpoints-1)/2;
+	return num_ports;
+}
+
+static bool is_listed(const u8 ifnum, const struct sierra_iface_list *list)
+{
+	int i;
+
+	if (!list)
+		return false;
+
+	for (i = 0; i < list->count; i++) {
+		if (list->nums[i] == ifnum)
+			return true;
+	}
+
+	return false;
+}
+
+static u8 sierra_interface_num(struct usb_serial *serial)
+{
+	return serial->interface->cur_altsetting->desc.bInterfaceNumber;
+}
+
+static int sierra_probe(struct usb_serial *serial,
+			const struct usb_device_id *id)
+{
+	const struct sierra_iface_list *ignore_list;
+	int result = 0;
+	struct usb_device *udev;
+	u8 ifnum;
+
+	udev = serial->dev;
+	ifnum = sierra_interface_num(serial);
+
+	/*
+	 * If this interface supports more than 1 alternate
+	 * select the 2nd one
+	 */
+	if (serial->interface->num_altsetting == 2) {
+		dev_dbg(&udev->dev, "Selecting alt setting for interface %d\n",
+			ifnum);
+		/* We know the alternate setting is 1 for the MC8785 */
+		usb_set_interface(udev, ifnum, 1);
+	}
+
+	ignore_list = (const struct sierra_iface_list *)id->driver_info;
+
+	if (is_listed(ifnum, ignore_list)) {
+		dev_dbg(&serial->dev->dev, "Ignoring interface #%d\n", ifnum);
+		return -ENODEV;
+	}
+
+	return result;
+}
+
+/* interfaces with higher memory requirements */
+static const u8 hi_memory_typeA_ifaces[] = { 0, 2 };
+static const struct sierra_iface_list typeA_interface_list = {
+	.nums	= hi_memory_typeA_ifaces,
+	.count	= ARRAY_SIZE(hi_memory_typeA_ifaces),
+};
+
+static const u8 hi_memory_typeB_ifaces[] = { 3, 4, 5, 6 };
+static const struct sierra_iface_list typeB_interface_list = {
+	.nums	= hi_memory_typeB_ifaces,
+	.count	= ARRAY_SIZE(hi_memory_typeB_ifaces),
+};
+
+/* 'ignorelist' of interfaces not served by this driver */
+static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11, 19, 20 };
+static const struct sierra_iface_list direct_ip_interface_ignore = {
+	.nums	= direct_ip_non_serial_ifaces,
+	.count	= ARRAY_SIZE(direct_ip_non_serial_ifaces),
+};
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
+	{ USB_DEVICE(0x03F0, 0x1B1D) },	/* HP ev2200 a.k.a MC5720 */
+	{ USB_DEVICE(0x03F0, 0x211D) }, /* HP ev2210 a.k.a MC5725 */
+	{ USB_DEVICE(0x03F0, 0x1E1D) },	/* HP hs2300 a.k.a MC8775 */
+
+	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
+	{ USB_DEVICE(0x1199, 0x0018) },	/* Sierra Wireless MC5720 */
+	{ USB_DEVICE(0x1199, 0x0218) },	/* Sierra Wireless MC5720 */
+	{ USB_DEVICE(0x1199, 0x0020) },	/* Sierra Wireless MC5725 */
+	{ USB_DEVICE(0x1199, 0x0220) },	/* Sierra Wireless MC5725 */
+	{ USB_DEVICE(0x1199, 0x0022) },	/* Sierra Wireless EM5725 */
+	{ USB_DEVICE(0x1199, 0x0024) },	/* Sierra Wireless MC5727 */
+	{ USB_DEVICE(0x1199, 0x0224) },	/* Sierra Wireless MC5727 */
+	{ USB_DEVICE(0x1199, 0x0019) },	/* Sierra Wireless AirCard 595 */
+	{ USB_DEVICE(0x1199, 0x0021) },	/* Sierra Wireless AirCard 597E */
+	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
+	{ USB_DEVICE(0x1199, 0x0120) },	/* Sierra Wireless USB Dongle 595U */
+	{ USB_DEVICE(0x1199, 0x0301) },	/* Sierra Wireless USB Dongle 250U */
+	/* Sierra Wireless C597 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
+	/* Sierra Wireless T598 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
+	{ USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless T11 */
+	{ USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless AC402 */
+	{ USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless MC5728 */
+	{ USB_DEVICE(0x1199, 0x0029) }, /* Sierra Wireless Device */
+
+	{ USB_DEVICE(0x1199, 0x6802) },	/* Sierra Wireless MC8755 */
+	{ USB_DEVICE(0x1199, 0x6803) },	/* Sierra Wireless MC8765 */
+	{ USB_DEVICE(0x1199, 0x6804) },	/* Sierra Wireless MC8755 */
+	{ USB_DEVICE(0x1199, 0x6805) },	/* Sierra Wireless MC8765 */
+	{ USB_DEVICE(0x1199, 0x6808) },	/* Sierra Wireless MC8755 */
+	{ USB_DEVICE(0x1199, 0x6809) },	/* Sierra Wireless MC8765 */
+	{ USB_DEVICE(0x1199, 0x6812) },	/* Sierra Wireless MC8775 & AC 875U */
+	{ USB_DEVICE(0x1199, 0x6813) },	/* Sierra Wireless MC8775 */
+	{ USB_DEVICE(0x1199, 0x6815) },	/* Sierra Wireless MC8775 */
+	{ USB_DEVICE(0x1199, 0x6816) },	/* Sierra Wireless MC8775 */
+	{ USB_DEVICE(0x1199, 0x6820) },	/* Sierra Wireless AirCard 875 */
+	{ USB_DEVICE(0x1199, 0x6821) },	/* Sierra Wireless AirCard 875U */
+	{ USB_DEVICE(0x1199, 0x6822) },	/* Sierra Wireless AirCard 875E */
+	{ USB_DEVICE(0x1199, 0x6832) },	/* Sierra Wireless MC8780 */
+	{ USB_DEVICE(0x1199, 0x6833) },	/* Sierra Wireless MC8781 */
+	{ USB_DEVICE(0x1199, 0x6834) },	/* Sierra Wireless MC8780 */
+	{ USB_DEVICE(0x1199, 0x6835) },	/* Sierra Wireless MC8781 */
+	{ USB_DEVICE(0x1199, 0x6838) },	/* Sierra Wireless MC8780 */
+	{ USB_DEVICE(0x1199, 0x6839) },	/* Sierra Wireless MC8781 */
+	{ USB_DEVICE(0x1199, 0x683A) },	/* Sierra Wireless MC8785 */
+	{ USB_DEVICE(0x1199, 0x683B) },	/* Sierra Wireless MC8785 Composite */
+	/* Sierra Wireless MC8790, MC8791, MC8792 Composite */
+	{ USB_DEVICE(0x1199, 0x683C) },
+	{ USB_DEVICE(0x1199, 0x683D) },	/* Sierra Wireless MC8791 Composite */
+	/* Sierra Wireless MC8790, MC8791, MC8792 */
+	{ USB_DEVICE(0x1199, 0x683E) },
+	{ USB_DEVICE(0x1199, 0x6850) },	/* Sierra Wireless AirCard 880 */
+	{ USB_DEVICE(0x1199, 0x6851) },	/* Sierra Wireless AirCard 881 */
+	{ USB_DEVICE(0x1199, 0x6852) },	/* Sierra Wireless AirCard 880 E */
+	{ USB_DEVICE(0x1199, 0x6853) },	/* Sierra Wireless AirCard 881 E */
+	{ USB_DEVICE(0x1199, 0x6855) },	/* Sierra Wireless AirCard 880 U */
+	{ USB_DEVICE(0x1199, 0x6856) },	/* Sierra Wireless AirCard 881 U */
+	{ USB_DEVICE(0x1199, 0x6859) },	/* Sierra Wireless AirCard 885 E */
+	{ USB_DEVICE(0x1199, 0x685A) },	/* Sierra Wireless AirCard 885 E */
+	/* Sierra Wireless C885 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
+	/* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
+	/* Sierra Wireless C22/C33 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)},
+	/* Sierra Wireless HSPA Non-Composite Device */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
+	{ USB_DEVICE(0x1199, 0x6893) },	/* Sierra Wireless Device */
+	/* Sierra Wireless Direct IP modems */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68A3, 0xFF, 0xFF, 0xFF),
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_ignore
+	},
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68AA, 0xFF, 0xFF, 0xFF),
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_ignore
+	},
+	{ USB_DEVICE(0x1199, 0x68AB) }, /* Sierra Wireless AR8550 */
+	/* AT&T Direct IP LTE modems */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_ignore
+	},
+	/* Airprime/Sierra Wireless Direct IP modems */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68A3, 0xFF, 0xFF, 0xFF),
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_ignore
+	},
+
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+
+struct sierra_port_private {
+	spinlock_t lock;	/* lock the structure */
+	int outstanding_urbs;	/* number of out urbs in flight */
+	struct usb_anchor active;
+	struct usb_anchor delayed;
+
+	int num_out_urbs;
+	int num_in_urbs;
+	/* Input endpoints and buffers for this port */
+	struct urb *in_urbs[N_IN_URB_HM];
+
+	/* Settings for the port */
+	int rts_state;	/* Handshaking pins (outputs) */
+	int dtr_state;
+	int cts_state;	/* Handshaking pins (inputs) */
+	int dsr_state;
+	int dcd_state;
+	int ri_state;
+};
+
+static int sierra_send_setup(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct sierra_port_private *portdata;
+	__u16 interface = 0;
+	int val = 0;
+	int do_send = 0;
+	int retval;
+
+	portdata = usb_get_serial_port_data(port);
+
+	if (portdata->dtr_state)
+		val |= 0x01;
+	if (portdata->rts_state)
+		val |= 0x02;
+
+	/* If composite device then properly report interface */
+	if (serial->num_ports == 1) {
+		interface = sierra_interface_num(serial);
+		/* Control message is sent only to interfaces with
+		 * interrupt_in endpoints
+		 */
+		if (port->interrupt_in_urb) {
+			/* send control message */
+			do_send = 1;
+		}
+	}
+
+	/* Otherwise the need to do non-composite mapping */
+	else {
+		if (port->bulk_out_endpointAddress == 2)
+			interface = 0;
+		else if (port->bulk_out_endpointAddress == 4)
+			interface = 1;
+		else if (port->bulk_out_endpointAddress == 5)
+			interface = 2;
+
+		do_send = 1;
+	}
+	if (!do_send)
+		return 0;
+
+	retval = usb_autopm_get_interface(serial->interface);
+	if (retval < 0)
+		return retval;
+
+	retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+		0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT);
+	usb_autopm_put_interface(serial->interface);
+
+	return retval;
+}
+
+static int sierra_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned int value;
+	struct sierra_port_private *portdata;
+
+	portdata = usb_get_serial_port_data(port);
+
+	value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
+		((portdata->dtr_state) ? TIOCM_DTR : 0) |
+		((portdata->cts_state) ? TIOCM_CTS : 0) |
+		((portdata->dsr_state) ? TIOCM_DSR : 0) |
+		((portdata->dcd_state) ? TIOCM_CAR : 0) |
+		((portdata->ri_state) ? TIOCM_RNG : 0);
+
+	return value;
+}
+
+static int sierra_tiocmset(struct tty_struct *tty,
+			unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct sierra_port_private *portdata;
+
+	portdata = usb_get_serial_port_data(port);
+
+	if (set & TIOCM_RTS)
+		portdata->rts_state = 1;
+	if (set & TIOCM_DTR)
+		portdata->dtr_state = 1;
+
+	if (clear & TIOCM_RTS)
+		portdata->rts_state = 0;
+	if (clear & TIOCM_DTR)
+		portdata->dtr_state = 0;
+	return sierra_send_setup(port);
+}
+
+static void sierra_release_urb(struct urb *urb)
+{
+	if (urb) {
+		kfree(urb->transfer_buffer);
+		usb_free_urb(urb);
+	}
+}
+
+static void sierra_outdat_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
+	struct sierra_intf_private *intfdata;
+	int status = urb->status;
+	unsigned long flags;
+
+	intfdata = usb_get_serial_data(port->serial);
+
+	/* free up the transfer buffer, as usb_free_urb() does not do this */
+	kfree(urb->transfer_buffer);
+	usb_autopm_put_interface_async(port->serial->interface);
+	if (status)
+		dev_dbg(&port->dev, "%s - nonzero write bulk status "
+		    "received: %d\n", __func__, status);
+
+	spin_lock_irqsave(&portdata->lock, flags);
+	--portdata->outstanding_urbs;
+	spin_unlock_irqrestore(&portdata->lock, flags);
+	spin_lock_irqsave(&intfdata->susp_lock, flags);
+	--intfdata->in_flight;
+	spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+
+	usb_serial_port_softint(port);
+}
+
+/* Write */
+static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
+{
+	struct sierra_port_private *portdata;
+	struct sierra_intf_private *intfdata;
+	struct usb_serial *serial = port->serial;
+	unsigned long flags;
+	unsigned char *buffer;
+	struct urb *urb;
+	size_t writesize = min((size_t)count, (size_t)MAX_TRANSFER);
+	int retval = 0;
+
+	/* verify that we actually have some data to write */
+	if (count == 0)
+		return 0;
+
+	portdata = usb_get_serial_port_data(port);
+	intfdata = usb_get_serial_data(serial);
+
+	dev_dbg(&port->dev, "%s: write (%zd bytes)\n", __func__, writesize);
+	spin_lock_irqsave(&portdata->lock, flags);
+	dev_dbg(&port->dev, "%s - outstanding_urbs: %d\n", __func__,
+		portdata->outstanding_urbs);
+	if (portdata->outstanding_urbs > portdata->num_out_urbs) {
+		spin_unlock_irqrestore(&portdata->lock, flags);
+		dev_dbg(&port->dev, "%s - write limit hit\n", __func__);
+		return 0;
+	}
+	portdata->outstanding_urbs++;
+	dev_dbg(&port->dev, "%s - 1, outstanding_urbs: %d\n", __func__,
+		portdata->outstanding_urbs);
+	spin_unlock_irqrestore(&portdata->lock, flags);
+
+	retval = usb_autopm_get_interface_async(serial->interface);
+	if (retval < 0) {
+		spin_lock_irqsave(&portdata->lock, flags);
+		portdata->outstanding_urbs--;
+		spin_unlock_irqrestore(&portdata->lock, flags);
+		goto error_simple;
+	}
+
+	buffer = kmemdup(buf, writesize, GFP_ATOMIC);
+	if (!buffer) {
+		retval = -ENOMEM;
+		goto error_no_buffer;
+	}
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb) {
+		retval = -ENOMEM;
+		goto error_no_urb;
+	}
+
+	usb_serial_debug_data(&port->dev, __func__, writesize, buffer);
+
+	usb_fill_bulk_urb(urb, serial->dev,
+			  usb_sndbulkpipe(serial->dev,
+					  port->bulk_out_endpointAddress),
+			  buffer, writesize, sierra_outdat_callback, port);
+
+	/* Handle the need to send a zero length packet */
+	urb->transfer_flags |= URB_ZERO_PACKET;
+
+	spin_lock_irqsave(&intfdata->susp_lock, flags);
+
+	if (intfdata->suspended) {
+		usb_anchor_urb(urb, &portdata->delayed);
+		spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+		goto skip_power;
+	} else {
+		usb_anchor_urb(urb, &portdata->active);
+	}
+	/* send it down the pipe */
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval) {
+		usb_unanchor_urb(urb);
+		spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+		dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
+			"with status = %d\n", __func__, retval);
+		goto error;
+	} else {
+		intfdata->in_flight++;
+		spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+	}
+
+skip_power:
+	/* we are done with this urb, so let the host driver
+	 * really free it when it is finished with it */
+	usb_free_urb(urb);
+
+	return writesize;
+error:
+	usb_free_urb(urb);
+error_no_urb:
+	kfree(buffer);
+error_no_buffer:
+	spin_lock_irqsave(&portdata->lock, flags);
+	--portdata->outstanding_urbs;
+	dev_dbg(&port->dev, "%s - 2. outstanding_urbs: %d\n", __func__,
+		portdata->outstanding_urbs);
+	spin_unlock_irqrestore(&portdata->lock, flags);
+	usb_autopm_put_interface_async(serial->interface);
+error_simple:
+	return retval;
+}
+
+static void sierra_indat_callback(struct urb *urb)
+{
+	int err;
+	int endpoint;
+	struct usb_serial_port *port;
+	unsigned char *data = urb->transfer_buffer;
+	int status = urb->status;
+
+	endpoint = usb_pipeendpoint(urb->pipe);
+	port = urb->context;
+
+	if (status) {
+		dev_dbg(&port->dev, "%s: nonzero status: %d on"
+			" endpoint %02x\n", __func__, status, endpoint);
+	} else {
+		if (urb->actual_length) {
+			tty_insert_flip_string(&port->port, data,
+				urb->actual_length);
+			tty_flip_buffer_push(&port->port);
+
+			usb_serial_debug_data(&port->dev, __func__,
+					      urb->actual_length, data);
+		} else {
+			dev_dbg(&port->dev, "%s: empty read urb"
+				" received\n", __func__);
+		}
+	}
+
+	/* Resubmit urb so we continue receiving */
+	if (status != -ESHUTDOWN && status != -EPERM) {
+		usb_mark_last_busy(port->serial->dev);
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err && err != -EPERM)
+			dev_err(&port->dev, "resubmit read urb failed."
+				"(%d)\n", err);
+	}
+}
+
+static void sierra_instat_callback(struct urb *urb)
+{
+	int err;
+	int status = urb->status;
+	struct usb_serial_port *port =  urb->context;
+	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+
+	dev_dbg(&port->dev, "%s: urb %p port %p has data %p\n", __func__,
+		urb, port, portdata);
+
+	if (status == 0) {
+		struct usb_ctrlrequest *req_pkt = urb->transfer_buffer;
+
+		if (!req_pkt) {
+			dev_dbg(&port->dev, "%s: NULL req_pkt\n",
+				__func__);
+			return;
+		}
+		if ((req_pkt->bRequestType == 0xA1) &&
+				(req_pkt->bRequest == 0x20)) {
+			int old_dcd_state;
+			unsigned char signals = *((unsigned char *)
+					urb->transfer_buffer +
+					sizeof(struct usb_ctrlrequest));
+
+			dev_dbg(&port->dev, "%s: signal x%x\n", __func__,
+				signals);
+
+			old_dcd_state = portdata->dcd_state;
+			portdata->cts_state = 1;
+			portdata->dcd_state = ((signals & 0x01) ? 1 : 0);
+			portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
+			portdata->ri_state = ((signals & 0x08) ? 1 : 0);
+
+			if (old_dcd_state && !portdata->dcd_state)
+				tty_port_tty_hangup(&port->port, true);
+		} else {
+			dev_dbg(&port->dev, "%s: type %x req %x\n",
+				__func__, req_pkt->bRequestType,
+				req_pkt->bRequest);
+		}
+	} else
+		dev_dbg(&port->dev, "%s: error %d\n", __func__, status);
+
+	/* Resubmit urb so we continue receiving IRQ data */
+	if (status != -ESHUTDOWN && status != -ENOENT) {
+		usb_mark_last_busy(serial->dev);
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err && err != -EPERM)
+			dev_err(&port->dev, "%s: resubmit intr urb "
+				"failed. (%d)\n", __func__, err);
+	}
+}
+
+static unsigned int sierra_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	/* try to give a good number back based on if we have any free urbs at
+	 * this point in time */
+	spin_lock_irqsave(&portdata->lock, flags);
+	if (portdata->outstanding_urbs > (portdata->num_out_urbs * 2) / 3) {
+		spin_unlock_irqrestore(&portdata->lock, flags);
+		dev_dbg(&port->dev, "%s - write limit hit\n", __func__);
+		return 0;
+	}
+	spin_unlock_irqrestore(&portdata->lock, flags);
+
+	return 2048;
+}
+
+static unsigned int sierra_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned int chars;
+
+	/* NOTE: This overcounts somewhat. */
+	spin_lock_irqsave(&portdata->lock, flags);
+	chars = portdata->outstanding_urbs * MAX_TRANSFER;
+	spin_unlock_irqrestore(&portdata->lock, flags);
+
+	dev_dbg(&port->dev, "%s - %u\n", __func__, chars);
+
+	return chars;
+}
+
+static void sierra_stop_rx_urbs(struct usb_serial_port *port)
+{
+	int i;
+	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
+
+	for (i = 0; i < portdata->num_in_urbs; i++)
+		usb_kill_urb(portdata->in_urbs[i]);
+
+	usb_kill_urb(port->interrupt_in_urb);
+}
+
+static int sierra_submit_rx_urbs(struct usb_serial_port *port, gfp_t mem_flags)
+{
+	int ok_cnt;
+	int err = -EINVAL;
+	int i;
+	struct urb *urb;
+	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
+
+	ok_cnt = 0;
+	for (i = 0; i < portdata->num_in_urbs; i++) {
+		urb = portdata->in_urbs[i];
+		if (!urb)
+			continue;
+		err = usb_submit_urb(urb, mem_flags);
+		if (err) {
+			dev_err(&port->dev, "%s: submit urb failed: %d\n",
+				__func__, err);
+		} else {
+			ok_cnt++;
+		}
+	}
+
+	if (ok_cnt && port->interrupt_in_urb) {
+		err = usb_submit_urb(port->interrupt_in_urb, mem_flags);
+		if (err) {
+			dev_err(&port->dev, "%s: submit intr urb failed: %d\n",
+				__func__, err);
+		}
+	}
+
+	if (ok_cnt > 0) /* at least one rx urb submitted */
+		return 0;
+	else
+		return err;
+}
+
+static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint,
+					int dir, void *ctx, int len,
+					gfp_t mem_flags,
+					usb_complete_t callback)
+{
+	struct urb	*urb;
+	u8		*buf;
+
+	urb = usb_alloc_urb(0, mem_flags);
+	if (!urb)
+		return NULL;
+
+	buf = kmalloc(len, mem_flags);
+	if (buf) {
+		/* Fill URB using supplied data */
+		usb_fill_bulk_urb(urb, serial->dev,
+			usb_sndbulkpipe(serial->dev, endpoint) | dir,
+			buf, len, callback, ctx);
+
+		dev_dbg(&serial->dev->dev, "%s %c u : %p d:%p\n", __func__,
+				dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
+	} else {
+		sierra_release_urb(urb);
+		urb = NULL;
+	}
+
+	return urb;
+}
+
+static void sierra_close(struct usb_serial_port *port)
+{
+	int i;
+	struct usb_serial *serial = port->serial;
+	struct sierra_port_private *portdata;
+	struct sierra_intf_private *intfdata = usb_get_serial_data(serial);
+	struct urb *urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	/*
+	 * Need to take susp_lock to make sure port is not already being
+	 * resumed, but no need to hold it due to the tty-port initialized
+	 * flag.
+	 */
+	spin_lock_irq(&intfdata->susp_lock);
+	if (--intfdata->open_ports == 0)
+		serial->interface->needs_remote_wakeup = 0;
+	spin_unlock_irq(&intfdata->susp_lock);
+
+	for (;;) {
+		urb = usb_get_from_anchor(&portdata->delayed);
+		if (!urb)
+			break;
+		kfree(urb->transfer_buffer);
+		usb_free_urb(urb);
+		usb_autopm_put_interface_async(serial->interface);
+		spin_lock_irq(&portdata->lock);
+		portdata->outstanding_urbs--;
+		spin_unlock_irq(&portdata->lock);
+	}
+
+	sierra_stop_rx_urbs(port);
+	usb_kill_anchored_urbs(&portdata->active);
+
+	for (i = 0; i < portdata->num_in_urbs; i++) {
+		sierra_release_urb(portdata->in_urbs[i]);
+		portdata->in_urbs[i] = NULL;
+	}
+
+	usb_autopm_get_interface_no_resume(serial->interface);
+}
+
+static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct sierra_port_private *portdata;
+	struct usb_serial *serial = port->serial;
+	struct sierra_intf_private *intfdata = usb_get_serial_data(serial);
+	int i;
+	int err;
+	int endpoint;
+	struct urb *urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	endpoint = port->bulk_in_endpointAddress;
+	for (i = 0; i < portdata->num_in_urbs; i++) {
+		urb = sierra_setup_urb(serial, endpoint, USB_DIR_IN, port,
+					IN_BUFLEN, GFP_KERNEL,
+					sierra_indat_callback);
+		portdata->in_urbs[i] = urb;
+	}
+	/* clear halt condition */
+	usb_clear_halt(serial->dev,
+			usb_sndbulkpipe(serial->dev, endpoint) | USB_DIR_IN);
+
+	err = sierra_submit_rx_urbs(port, GFP_KERNEL);
+	if (err)
+		goto err_submit;
+
+	spin_lock_irq(&intfdata->susp_lock);
+	if (++intfdata->open_ports == 1)
+		serial->interface->needs_remote_wakeup = 1;
+	spin_unlock_irq(&intfdata->susp_lock);
+	usb_autopm_put_interface(serial->interface);
+
+	return 0;
+
+err_submit:
+	sierra_stop_rx_urbs(port);
+
+	for (i = 0; i < portdata->num_in_urbs; i++) {
+		sierra_release_urb(portdata->in_urbs[i]);
+		portdata->in_urbs[i] = NULL;
+	}
+
+	return err;
+}
+
+
+static void sierra_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct sierra_port_private *portdata;
+
+	portdata = usb_get_serial_port_data(port);
+	portdata->rts_state = on;
+	portdata->dtr_state = on;
+
+	sierra_send_setup(port);
+}
+
+static int sierra_startup(struct usb_serial *serial)
+{
+	struct sierra_intf_private *intfdata;
+
+	intfdata = kzalloc(sizeof(*intfdata), GFP_KERNEL);
+	if (!intfdata)
+		return -ENOMEM;
+
+	spin_lock_init(&intfdata->susp_lock);
+
+	usb_set_serial_data(serial, intfdata);
+
+	/* Set Device mode to D0 */
+	sierra_set_power_state(serial->dev, 0x0000);
+
+	/* Check NMEA and set */
+	if (nmea)
+		sierra_vsc_set_nmea(serial->dev, 1);
+
+	return 0;
+}
+
+static void sierra_release(struct usb_serial *serial)
+{
+	struct sierra_intf_private *intfdata;
+
+	intfdata = usb_get_serial_data(serial);
+	kfree(intfdata);
+}
+
+static int sierra_port_probe(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct sierra_port_private *portdata;
+	const struct sierra_iface_list *himemory_list;
+	u8 ifnum;
+
+	portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
+	if (!portdata)
+		return -ENOMEM;
+
+	spin_lock_init(&portdata->lock);
+	init_usb_anchor(&portdata->active);
+	init_usb_anchor(&portdata->delayed);
+
+	/* Assume low memory requirements */
+	portdata->num_out_urbs = N_OUT_URB;
+	portdata->num_in_urbs  = N_IN_URB;
+
+	/* Determine actual memory requirements */
+	if (serial->num_ports == 1) {
+		/* Get interface number for composite device */
+		ifnum = sierra_interface_num(serial);
+		himemory_list = &typeB_interface_list;
+	} else {
+		/* This is really the usb-serial port number of the interface
+		 * rather than the interface number.
+		 */
+		ifnum = port->port_number;
+		himemory_list = &typeA_interface_list;
+	}
+
+	if (is_listed(ifnum, himemory_list)) {
+		portdata->num_out_urbs = N_OUT_URB_HM;
+		portdata->num_in_urbs  = N_IN_URB_HM;
+	}
+
+	dev_dbg(&port->dev,
+			"Memory usage (urbs) interface #%d, in=%d, out=%d\n",
+			ifnum, portdata->num_in_urbs, portdata->num_out_urbs);
+
+	usb_set_serial_port_data(port, portdata);
+
+	return 0;
+}
+
+static void sierra_port_remove(struct usb_serial_port *port)
+{
+	struct sierra_port_private *portdata;
+
+	portdata = usb_get_serial_port_data(port);
+	usb_set_serial_port_data(port, NULL);
+	kfree(portdata);
+}
+
+#ifdef CONFIG_PM
+static void stop_read_write_urbs(struct usb_serial *serial)
+{
+	int i;
+	struct usb_serial_port *port;
+	struct sierra_port_private *portdata;
+
+	/* Stop reading/writing urbs */
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+		if (!portdata)
+			continue;
+		sierra_stop_rx_urbs(port);
+		usb_kill_anchored_urbs(&portdata->active);
+	}
+}
+
+static int sierra_suspend(struct usb_serial *serial, pm_message_t message)
+{
+	struct sierra_intf_private *intfdata = usb_get_serial_data(serial);
+
+	spin_lock_irq(&intfdata->susp_lock);
+	if (PMSG_IS_AUTO(message)) {
+		if (intfdata->in_flight) {
+			spin_unlock_irq(&intfdata->susp_lock);
+			return -EBUSY;
+		}
+	}
+	intfdata->suspended = 1;
+	spin_unlock_irq(&intfdata->susp_lock);
+
+	stop_read_write_urbs(serial);
+
+	return 0;
+}
+
+/* Caller must hold susp_lock. */
+static int sierra_submit_delayed_urbs(struct usb_serial_port *port)
+{
+	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
+	struct sierra_intf_private *intfdata;
+	struct urb *urb;
+	int ec = 0;
+	int err;
+
+	intfdata = usb_get_serial_data(port->serial);
+
+	for (;;) {
+		urb = usb_get_from_anchor(&portdata->delayed);
+		if (!urb)
+			break;
+
+		usb_anchor_urb(urb, &portdata->active);
+		intfdata->in_flight++;
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err) {
+			dev_err(&port->dev, "%s - submit urb failed: %d",
+					__func__, err);
+			ec++;
+			intfdata->in_flight--;
+			usb_unanchor_urb(urb);
+			kfree(urb->transfer_buffer);
+			usb_free_urb(urb);
+
+			spin_lock(&portdata->lock);
+			portdata->outstanding_urbs--;
+			spin_unlock(&portdata->lock);
+		}
+	}
+
+	if (ec)
+		return -EIO;
+
+	return 0;
+}
+
+static int sierra_resume(struct usb_serial *serial)
+{
+	struct usb_serial_port *port;
+	struct sierra_intf_private *intfdata = usb_get_serial_data(serial);
+	int ec = 0;
+	int i, err;
+
+	spin_lock_irq(&intfdata->susp_lock);
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+
+		if (!tty_port_initialized(&port->port))
+			continue;
+
+		err = sierra_submit_delayed_urbs(port);
+		if (err)
+			ec++;
+
+		err = sierra_submit_rx_urbs(port, GFP_ATOMIC);
+		if (err)
+			ec++;
+	}
+	intfdata->suspended = 0;
+	spin_unlock_irq(&intfdata->susp_lock);
+
+	return ec ? -EIO : 0;
+}
+
+#else
+#define sierra_suspend NULL
+#define sierra_resume NULL
+#endif
+
+static struct usb_serial_driver sierra_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"sierra",
+	},
+	.description       = "Sierra USB modem",
+	.id_table          = id_table,
+	.calc_num_ports	   = sierra_calc_num_ports,
+	.probe		   = sierra_probe,
+	.open              = sierra_open,
+	.close             = sierra_close,
+	.dtr_rts	   = sierra_dtr_rts,
+	.write             = sierra_write,
+	.write_room        = sierra_write_room,
+	.chars_in_buffer   = sierra_chars_in_buffer,
+	.tiocmget          = sierra_tiocmget,
+	.tiocmset          = sierra_tiocmset,
+	.attach            = sierra_startup,
+	.release           = sierra_release,
+	.port_probe        = sierra_port_probe,
+	.port_remove       = sierra_port_remove,
+	.suspend	   = sierra_suspend,
+	.resume		   = sierra_resume,
+	.read_int_callback = sierra_instat_callback,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&sierra_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
+
+module_param(nmea, bool, 0644);
+MODULE_PARM_DESC(nmea, "NMEA streaming");
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
new file mode 100644
index 000000000..09a972a83
--- /dev/null
+++ b/drivers/usb/serial/spcp8x5.c
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * spcp8x5 USB to serial adaptor driver
+ *
+ * Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com)
+ * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
+ * Copyright (C) 2006 S1 Corp.
+ *
+ * Original driver for 2.6.10 pl2303 driver by
+ *   Greg Kroah-Hartman (greg@kroah.com)
+ * Changes for 2.6.20 by Harald Klein <hari@vt100.at>
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define DRIVER_DESC	"SPCP8x5 USB to serial adaptor driver"
+
+#define SPCP825_QUIRK_NO_UART_STATUS	0x01
+#define SPCP825_QUIRK_NO_WORK_MODE	0x02
+
+#define SPCP8x5_007_VID		0x04FC
+#define SPCP8x5_007_PID		0x0201
+#define SPCP8x5_008_VID		0x04fc
+#define SPCP8x5_008_PID		0x0235
+#define SPCP8x5_PHILIPS_VID	0x0471
+#define SPCP8x5_PHILIPS_PID	0x081e
+#define SPCP8x5_INTERMATIC_VID	0x04FC
+#define SPCP8x5_INTERMATIC_PID	0x0204
+#define SPCP8x5_835_VID		0x04fc
+#define SPCP8x5_835_PID		0x0231
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
+	{ USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
+	{ USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
+	{ USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
+	{ USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID),
+	  .driver_info = SPCP825_QUIRK_NO_UART_STATUS |
+				SPCP825_QUIRK_NO_WORK_MODE },
+	{ }					/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct spcp8x5_usb_ctrl_arg {
+	u8	type;
+	u8	cmd;
+	u8	cmd_type;
+	u16	value;
+	u16	index;
+	u16	length;
+};
+
+
+/* spcp8x5 spec register define */
+#define MCR_CONTROL_LINE_RTS		0x02
+#define MCR_CONTROL_LINE_DTR		0x01
+#define MCR_DTR				0x01
+#define MCR_RTS				0x02
+
+#define MSR_STATUS_LINE_DCD		0x80
+#define MSR_STATUS_LINE_RI		0x40
+#define MSR_STATUS_LINE_DSR		0x20
+#define MSR_STATUS_LINE_CTS		0x10
+
+/* verdor command here , we should define myself */
+#define SET_DEFAULT			0x40
+#define SET_DEFAULT_TYPE		0x20
+
+#define SET_UART_FORMAT			0x40
+#define SET_UART_FORMAT_TYPE		0x21
+#define SET_UART_FORMAT_SIZE_5		0x00
+#define SET_UART_FORMAT_SIZE_6		0x01
+#define SET_UART_FORMAT_SIZE_7		0x02
+#define SET_UART_FORMAT_SIZE_8		0x03
+#define SET_UART_FORMAT_STOP_1		0x00
+#define SET_UART_FORMAT_STOP_2		0x04
+#define SET_UART_FORMAT_PAR_NONE	0x00
+#define SET_UART_FORMAT_PAR_ODD		0x10
+#define SET_UART_FORMAT_PAR_EVEN	0x30
+#define SET_UART_FORMAT_PAR_MASK	0xD0
+#define SET_UART_FORMAT_PAR_SPACE	0x90
+
+#define GET_UART_STATUS_TYPE		0xc0
+#define GET_UART_STATUS			0x22
+#define GET_UART_STATUS_MSR		0x06
+
+#define SET_UART_STATUS			0x40
+#define SET_UART_STATUS_TYPE		0x23
+#define SET_UART_STATUS_MCR		0x0004
+#define SET_UART_STATUS_MCR_DTR		0x01
+#define SET_UART_STATUS_MCR_RTS		0x02
+#define SET_UART_STATUS_MCR_LOOP	0x10
+
+#define SET_WORKING_MODE		0x40
+#define SET_WORKING_MODE_TYPE		0x24
+#define SET_WORKING_MODE_U2C		0x00
+#define SET_WORKING_MODE_RS485		0x01
+#define SET_WORKING_MODE_PDMA		0x02
+#define SET_WORKING_MODE_SPP		0x03
+
+#define SET_FLOWCTL_CHAR		0x40
+#define SET_FLOWCTL_CHAR_TYPE		0x25
+
+#define GET_VERSION			0xc0
+#define GET_VERSION_TYPE		0x26
+
+#define SET_REGISTER			0x40
+#define SET_REGISTER_TYPE		0x27
+
+#define	GET_REGISTER			0xc0
+#define GET_REGISTER_TYPE		0x28
+
+#define SET_RAM				0x40
+#define SET_RAM_TYPE			0x31
+
+#define GET_RAM				0xc0
+#define GET_RAM_TYPE			0x32
+
+/* how come ??? */
+#define UART_STATE			0x08
+#define UART_STATE_TRANSIENT_MASK	0x75
+#define UART_DCD			0x01
+#define UART_DSR			0x02
+#define UART_BREAK_ERROR		0x04
+#define UART_RING			0x08
+#define UART_FRAME_ERROR		0x10
+#define UART_PARITY_ERROR		0x20
+#define UART_OVERRUN_ERROR		0x40
+#define UART_CTS			0x80
+
+struct spcp8x5_private {
+	unsigned		quirks;
+	spinlock_t		lock;
+	u8			line_control;
+};
+
+static int spcp8x5_probe(struct usb_serial *serial,
+						const struct usb_device_id *id)
+{
+	usb_set_serial_data(serial, (void *)id);
+
+	return 0;
+}
+
+static int spcp8x5_port_probe(struct usb_serial_port *port)
+{
+	const struct usb_device_id *id = usb_get_serial_data(port->serial);
+	struct spcp8x5_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+	priv->quirks = id->driver_info;
+
+	usb_set_serial_port_data(port, priv);
+
+	port->port.drain_delay = 256;
+
+	return 0;
+}
+
+static void spcp8x5_port_remove(struct usb_serial_port *port)
+{
+	struct spcp8x5_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+}
+
+static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *dev = port->serial->dev;
+	int retval;
+
+	if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
+		return -EPERM;
+
+	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 SET_UART_STATUS_TYPE, SET_UART_STATUS,
+				 mcr, 0x04, NULL, 0, 100);
+	if (retval != 0) {
+		dev_err(&port->dev, "failed to set control lines: %d\n",
+								retval);
+	}
+	return retval;
+}
+
+static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *dev = port->serial->dev;
+	u8 *buf;
+	int ret;
+
+	if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
+		return -EPERM;
+
+	buf = kzalloc(1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      GET_UART_STATUS, GET_UART_STATUS_TYPE,
+			      0, GET_UART_STATUS_MSR, buf, 1, 100);
+	if (ret < 1) {
+		dev_err(&port->dev, "failed to get modem status: %d\n", ret);
+		if (ret >= 0)
+			ret = -EIO;
+		goto out;
+	}
+
+	dev_dbg(&port->dev, "0xc0:0x22:0:6  %d - 0x02%x\n", ret, *buf);
+	*status = *buf;
+	ret = 0;
+out:
+	kfree(buf);
+
+	return ret;
+}
+
+static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value,
+								 u16 index)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *dev = port->serial->dev;
+	int ret;
+
+	if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE)
+		return;
+
+	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			      SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
+			      value, index, NULL, 0, 100);
+	dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index);
+	if (ret < 0)
+		dev_err(&port->dev, "failed to set work mode: %d\n", ret);
+}
+
+static int spcp8x5_carrier_raised(struct usb_serial_port *port)
+{
+	u8 msr;
+	int ret;
+
+	ret = spcp8x5_get_msr(port, &msr);
+	if (ret || msr & MSR_STATUS_LINE_DCD)
+		return 1;
+
+	return 0;
+}
+
+static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (on)
+		priv->line_control = MCR_CONTROL_LINE_DTR
+						| MCR_CONTROL_LINE_RTS;
+	else
+		priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
+						| MCR_CONTROL_LINE_RTS);
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	spcp8x5_set_ctrl_line(port, control);
+}
+
+static void spcp8x5_init_termios(struct tty_struct *tty)
+{
+	tty_encode_baud_rate(tty, 115200, 115200);
+}
+
+static void spcp8x5_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
+				const struct ktermios *old_termios)
+{
+	struct usb_serial *serial = port->serial;
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned int cflag = tty->termios.c_cflag;
+	unsigned short uartdata;
+	unsigned char buf[2] = {0, 0};
+	int baud;
+	int i;
+	u8 control;
+
+	/* check that they really want us to change something */
+	if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
+		return;
+
+	/* set DTR/RTS active */
+	spin_lock_irqsave(&priv->lock, flags);
+	control = priv->line_control;
+	if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
+		priv->line_control |= MCR_DTR;
+		if (!(old_termios->c_cflag & CRTSCTS))
+			priv->line_control |= MCR_RTS;
+	}
+	if (control != priv->line_control) {
+		control = priv->line_control;
+		spin_unlock_irqrestore(&priv->lock, flags);
+		spcp8x5_set_ctrl_line(port, control);
+	} else {
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+
+	/* Set Baud Rate */
+	baud = tty_get_baud_rate(tty);
+	switch (baud) {
+	case 300:	buf[0] = 0x00;	break;
+	case 600:	buf[0] = 0x01;	break;
+	case 1200:	buf[0] = 0x02;	break;
+	case 2400:	buf[0] = 0x03;	break;
+	case 4800:	buf[0] = 0x04;	break;
+	case 9600:	buf[0] = 0x05;	break;
+	case 19200:	buf[0] = 0x07;	break;
+	case 38400:	buf[0] = 0x09;	break;
+	case 57600:	buf[0] = 0x0a;	break;
+	case 115200:	buf[0] = 0x0b;	break;
+	case 230400:	buf[0] = 0x0c;	break;
+	case 460800:	buf[0] = 0x0d;	break;
+	case 921600:	buf[0] = 0x0e;	break;
+/*	case 1200000:	buf[0] = 0x0f;	break; */
+/*	case 2400000:	buf[0] = 0x10;	break; */
+	case 3000000:	buf[0] = 0x11;	break;
+/*	case 6000000:	buf[0] = 0x12;	break; */
+	case 0:
+	case 1000000:
+			buf[0] = 0x0b;	break;
+	default:
+		dev_err(&port->dev, "unsupported baudrate, using 9600\n");
+	}
+
+	/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
+	switch (cflag & CSIZE) {
+	case CS5:
+		buf[1] |= SET_UART_FORMAT_SIZE_5;
+		break;
+	case CS6:
+		buf[1] |= SET_UART_FORMAT_SIZE_6;
+		break;
+	case CS7:
+		buf[1] |= SET_UART_FORMAT_SIZE_7;
+		break;
+	default:
+	case CS8:
+		buf[1] |= SET_UART_FORMAT_SIZE_8;
+		break;
+	}
+
+	/* Set Stop bit2 : 0:1bit 1:2bit */
+	buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 :
+				     SET_UART_FORMAT_STOP_1;
+
+	/* Set Parity bit3-4 01:Odd 11:Even */
+	if (cflag & PARENB) {
+		buf[1] |= (cflag & PARODD) ?
+		SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
+	} else {
+		buf[1] |= SET_UART_FORMAT_PAR_NONE;
+	}
+	uartdata = buf[0] | buf[1]<<8;
+
+	i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			    SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
+			    uartdata, 0, NULL, 0, 100);
+	if (i < 0)
+		dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
+			uartdata, i);
+	dev_dbg(&port->dev, "0x21:0x40:0:0  %d\n", i);
+
+	if (cflag & CRTSCTS) {
+		/* enable hardware flow control */
+		spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C);
+	}
+}
+
+static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	int ret;
+
+	usb_clear_halt(serial->dev, port->write_urb->pipe);
+	usb_clear_halt(serial->dev, port->read_urb->pipe);
+
+	ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			      0x09, 0x00,
+			      0x01, 0x00, NULL, 0x00, 100);
+	if (ret)
+		return ret;
+
+	spcp8x5_set_ctrl_line(port, priv->line_control);
+
+	if (tty)
+		spcp8x5_set_termios(tty, port, NULL);
+
+	return usb_serial_generic_open(tty, port);
+}
+
+static int spcp8x5_tiocmset(struct tty_struct *tty,
+			    unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (set & TIOCM_RTS)
+		priv->line_control |= MCR_RTS;
+	if (set & TIOCM_DTR)
+		priv->line_control |= MCR_DTR;
+	if (clear & TIOCM_RTS)
+		priv->line_control &= ~MCR_RTS;
+	if (clear & TIOCM_DTR)
+		priv->line_control &= ~MCR_DTR;
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return spcp8x5_set_ctrl_line(port, control);
+}
+
+static int spcp8x5_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned int mcr;
+	u8 status;
+	unsigned int result;
+
+	result = spcp8x5_get_msr(port, &status);
+	if (result)
+		return result;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	mcr = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	result = ((mcr & MCR_DTR)			? TIOCM_DTR : 0)
+		  | ((mcr & MCR_RTS)			? TIOCM_RTS : 0)
+		  | ((status & MSR_STATUS_LINE_CTS)	? TIOCM_CTS : 0)
+		  | ((status & MSR_STATUS_LINE_DSR)	? TIOCM_DSR : 0)
+		  | ((status & MSR_STATUS_LINE_RI)	? TIOCM_RI  : 0)
+		  | ((status & MSR_STATUS_LINE_DCD)	? TIOCM_CD  : 0);
+
+	return result;
+}
+
+static struct usb_serial_driver spcp8x5_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"SPCP8x5",
+	},
+	.id_table		= id_table,
+	.num_ports		= 1,
+	.num_bulk_in		= 1,
+	.num_bulk_out		= 1,
+	.open			= spcp8x5_open,
+	.dtr_rts		= spcp8x5_dtr_rts,
+	.carrier_raised		= spcp8x5_carrier_raised,
+	.set_termios		= spcp8x5_set_termios,
+	.init_termios		= spcp8x5_init_termios,
+	.tiocmget		= spcp8x5_tiocmget,
+	.tiocmset		= spcp8x5_tiocmset,
+	.probe			= spcp8x5_probe,
+	.port_probe		= spcp8x5_port_probe,
+	.port_remove		= spcp8x5_port_remove,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&spcp8x5_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
new file mode 100644
index 000000000..1e1888b66
--- /dev/null
+++ b/drivers/usb/serial/ssu100.c
@@ -0,0 +1,529 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * usb-serial driver for Quatech SSU-100
+ *
+ * based on ftdi_sio.c and the original serqt_usb.c from Quatech
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/uaccess.h>
+
+#define QT_OPEN_CLOSE_CHANNEL       0xca
+#define QT_SET_GET_DEVICE           0xc2
+#define QT_SET_GET_REGISTER         0xc0
+#define QT_GET_SET_PREBUF_TRIG_LVL  0xcc
+#define QT_SET_ATF                  0xcd
+#define QT_GET_SET_UART             0xc1
+#define QT_TRANSFER_IN              0xc0
+#define QT_HW_FLOW_CONTROL_MASK     0xc5
+#define QT_SW_FLOW_CONTROL_MASK     0xc6
+
+#define  SERIAL_MSR_MASK            0xf0
+
+#define  SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS)
+
+#define  SERIAL_EVEN_PARITY         (UART_LCR_PARITY | UART_LCR_EPAR)
+
+#define  MAX_BAUD_RATE              460800
+
+#define ATC_DISABLED                0x00
+#define DUPMODE_BITS        0xc0
+#define RR_BITS             0x03
+#define LOOPMODE_BITS       0x41
+#define RS232_MODE          0x00
+#define RTSCTS_TO_CONNECTOR 0x40
+#define CLKS_X4             0x02
+#define FULLPWRBIT          0x00000080
+#define NEXT_BOARD_POWER_BIT        0x00000004
+
+#define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver"
+
+#define	USB_VENDOR_ID_QUATECH	0x061d	/* Quatech VID */
+#define QUATECH_SSU100	0xC020	/* SSU100 */
+
+static const struct usb_device_id id_table[] = {
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)},
+	{}			/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct ssu100_port_private {
+	spinlock_t status_lock;
+	u8 shadowLSR;
+	u8 shadowMSR;
+};
+
+static inline int ssu100_control_msg(struct usb_device *dev,
+				     u8 request, u16 data, u16 index)
+{
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			       request, 0x40, data, index,
+			       NULL, 0, 300);
+}
+
+static inline int ssu100_setdevice(struct usb_device *dev, u8 *data)
+{
+	u16 x = ((u16)(data[1] << 8) | (u16)(data[0]));
+
+	return ssu100_control_msg(dev, QT_SET_GET_DEVICE, x, 0);
+}
+
+
+static inline int ssu100_getdevice(struct usb_device *dev, u8 *data)
+{
+	int ret;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      QT_SET_GET_DEVICE, 0xc0, 0, 0,
+			      data, 3, 300);
+	if (ret < 3) {
+		if (ret >= 0)
+			ret = -EIO;
+	}
+
+	return ret;
+}
+
+static inline int ssu100_getregister(struct usb_device *dev,
+				     unsigned short uart,
+				     unsigned short reg,
+				     u8 *data)
+{
+	int ret;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      QT_SET_GET_REGISTER, 0xc0, reg,
+			      uart, data, sizeof(*data), 300);
+	if (ret < (int)sizeof(*data)) {
+		if (ret >= 0)
+			ret = -EIO;
+	}
+
+	return ret;
+}
+
+
+static inline int ssu100_setregister(struct usb_device *dev,
+				     unsigned short uart,
+				     unsigned short reg,
+				     u16 data)
+{
+	u16 value = (data << 8) | reg;
+
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			       QT_SET_GET_REGISTER, 0x40, value, uart,
+			       NULL, 0, 300);
+
+}
+
+#define set_mctrl(dev, set)		update_mctrl((dev), (set), 0)
+#define clear_mctrl(dev, clear)	update_mctrl((dev), 0, (clear))
+
+/* these do not deal with device that have more than 1 port */
+static inline int update_mctrl(struct usb_device *dev, unsigned int set,
+			       unsigned int clear)
+{
+	unsigned urb_value;
+	int result;
+
+	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
+		dev_dbg(&dev->dev, "%s - DTR|RTS not being set|cleared\n", __func__);
+		return 0;	/* no change */
+	}
+
+	clear &= ~set;	/* 'set' takes precedence over 'clear' */
+	urb_value = 0;
+	if (set & TIOCM_DTR)
+		urb_value |= UART_MCR_DTR;
+	if (set & TIOCM_RTS)
+		urb_value |= UART_MCR_RTS;
+
+	result = ssu100_setregister(dev, 0, UART_MCR, urb_value);
+	if (result < 0)
+		dev_dbg(&dev->dev, "%s Error from MODEM_CTRL urb\n", __func__);
+
+	return result;
+}
+
+static int ssu100_initdevice(struct usb_device *dev)
+{
+	u8 *data;
+	int result = 0;
+
+	data = kzalloc(3, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	result = ssu100_getdevice(dev, data);
+	if (result < 0) {
+		dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result);
+		goto out;
+	}
+
+	data[1] &= ~FULLPWRBIT;
+
+	result = ssu100_setdevice(dev, data);
+	if (result < 0) {
+		dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result);
+		goto out;
+	}
+
+	result = ssu100_control_msg(dev, QT_GET_SET_PREBUF_TRIG_LVL, 128, 0);
+	if (result < 0) {
+		dev_dbg(&dev->dev, "%s - set prebuffer level failed %i\n", __func__, result);
+		goto out;
+	}
+
+	result = ssu100_control_msg(dev, QT_SET_ATF, ATC_DISABLED, 0);
+	if (result < 0) {
+		dev_dbg(&dev->dev, "%s - set ATFprebuffer level failed %i\n", __func__, result);
+		goto out;
+	}
+
+	result = ssu100_getdevice(dev, data);
+	if (result < 0) {
+		dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result);
+		goto out;
+	}
+
+	data[0] &= ~(RR_BITS | DUPMODE_BITS);
+	data[0] |= CLKS_X4;
+	data[1] &= ~(LOOPMODE_BITS);
+	data[1] |= RS232_MODE;
+
+	result = ssu100_setdevice(dev, data);
+	if (result < 0) {
+		dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result);
+		goto out;
+	}
+
+out:	kfree(data);
+	return result;
+
+}
+
+
+static void ssu100_set_termios(struct tty_struct *tty,
+		               struct usb_serial_port *port,
+		               const struct ktermios *old_termios)
+{
+	struct usb_device *dev = port->serial->dev;
+	struct ktermios *termios = &tty->termios;
+	u16 baud, divisor, remainder;
+	unsigned int cflag = termios->c_cflag;
+	u16 urb_value = 0; /* will hold the new flags */
+	int result;
+
+	if (cflag & PARENB) {
+		if (cflag & PARODD)
+			urb_value |= UART_LCR_PARITY;
+		else
+			urb_value |= SERIAL_EVEN_PARITY;
+	}
+
+	urb_value |= UART_LCR_WLEN(tty_get_char_size(cflag));
+
+	baud = tty_get_baud_rate(tty);
+	if (!baud)
+		baud = 9600;
+
+	dev_dbg(&port->dev, "%s - got baud = %d\n", __func__, baud);
+
+
+	divisor = MAX_BAUD_RATE / baud;
+	remainder = MAX_BAUD_RATE % baud;
+	if (((remainder * 2) >= baud) && (baud != 110))
+		divisor++;
+
+	urb_value = urb_value << 8;
+
+	result = ssu100_control_msg(dev, QT_GET_SET_UART, divisor, urb_value);
+	if (result < 0)
+		dev_dbg(&port->dev, "%s - set uart failed\n", __func__);
+
+	if (cflag & CRTSCTS)
+		result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
+					    SERIAL_CRTSCTS, 0);
+	else
+		result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
+					    0, 0);
+	if (result < 0)
+		dev_dbg(&port->dev, "%s - set HW flow control failed\n", __func__);
+
+	if (I_IXOFF(tty) || I_IXON(tty)) {
+		u16 x = ((u16)(START_CHAR(tty) << 8) | (u16)(STOP_CHAR(tty)));
+
+		result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
+					    x, 0);
+	} else
+		result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
+					    0, 0);
+
+	if (result < 0)
+		dev_dbg(&port->dev, "%s - set SW flow control failed\n", __func__);
+
+}
+
+
+static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_device *dev = port->serial->dev;
+	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+	u8 *data;
+	int result;
+	unsigned long flags;
+
+	data = kzalloc(2, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+				 QT_OPEN_CLOSE_CHANNEL,
+				 QT_TRANSFER_IN, 0x01,
+				 0, data, 2, 300);
+	if (result < 2) {
+		dev_dbg(&port->dev, "%s - open failed %i\n", __func__, result);
+		if (result >= 0)
+			result = -EIO;
+		kfree(data);
+		return result;
+	}
+
+	spin_lock_irqsave(&priv->status_lock, flags);
+	priv->shadowLSR = data[0];
+	priv->shadowMSR = data[1];
+	spin_unlock_irqrestore(&priv->status_lock, flags);
+
+	kfree(data);
+
+/* set to 9600 */
+	result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300);
+	if (result < 0)
+		dev_dbg(&port->dev, "%s - set uart failed\n", __func__);
+
+	if (tty)
+		ssu100_set_termios(tty, port, &tty->termios);
+
+	return usb_serial_generic_open(tty, port);
+}
+
+static int ssu100_attach(struct usb_serial *serial)
+{
+	return ssu100_initdevice(serial->dev);
+}
+
+static int ssu100_port_probe(struct usb_serial_port *port)
+{
+	struct ssu100_port_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->status_lock);
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
+}
+
+static void ssu100_port_remove(struct usb_serial_port *port)
+{
+	struct ssu100_port_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+}
+
+static int ssu100_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_device *dev = port->serial->dev;
+	u8 *d;
+	int r;
+
+	d = kzalloc(2, GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	r = ssu100_getregister(dev, 0, UART_MCR, d);
+	if (r < 0)
+		goto mget_out;
+
+	r = ssu100_getregister(dev, 0, UART_MSR, d+1);
+	if (r < 0)
+		goto mget_out;
+
+	r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) |
+		(d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) |
+		(d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) |
+		(d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) |
+		(d[1] & UART_MSR_RI ? TIOCM_RI : 0) |
+		(d[1] & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+mget_out:
+	kfree(d);
+	return r;
+}
+
+static int ssu100_tiocmset(struct tty_struct *tty,
+			   unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_device *dev = port->serial->dev;
+
+	return update_mctrl(dev, set, clear);
+}
+
+static void ssu100_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_device *dev = port->serial->dev;
+
+	/* Disable flow control */
+	if (!on) {
+		if (ssu100_setregister(dev, 0, UART_MCR, 0) < 0)
+			dev_err(&port->dev, "error from flowcontrol urb\n");
+	}
+	/* drop RTS and DTR */
+	if (on)
+		set_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
+	else
+		clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
+}
+
+static void ssu100_update_msr(struct usb_serial_port *port, u8 msr)
+{
+	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->status_lock, flags);
+	priv->shadowMSR = msr;
+	spin_unlock_irqrestore(&priv->status_lock, flags);
+
+	if (msr & UART_MSR_ANY_DELTA) {
+		/* update input line counters */
+		if (msr & UART_MSR_DCTS)
+			port->icount.cts++;
+		if (msr & UART_MSR_DDSR)
+			port->icount.dsr++;
+		if (msr & UART_MSR_DDCD)
+			port->icount.dcd++;
+		if (msr & UART_MSR_TERI)
+			port->icount.rng++;
+		wake_up_interruptible(&port->port.delta_msr_wait);
+	}
+}
+
+static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr,
+			      char *tty_flag)
+{
+	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->status_lock, flags);
+	priv->shadowLSR = lsr;
+	spin_unlock_irqrestore(&priv->status_lock, flags);
+
+	*tty_flag = TTY_NORMAL;
+	if (lsr & UART_LSR_BRK_ERROR_BITS) {
+		/* we always want to update icount, but we only want to
+		 * update tty_flag for one case */
+		if (lsr & UART_LSR_BI) {
+			port->icount.brk++;
+			*tty_flag = TTY_BREAK;
+			usb_serial_handle_break(port);
+		}
+		if (lsr & UART_LSR_PE) {
+			port->icount.parity++;
+			if (*tty_flag == TTY_NORMAL)
+				*tty_flag = TTY_PARITY;
+		}
+		if (lsr & UART_LSR_FE) {
+			port->icount.frame++;
+			if (*tty_flag == TTY_NORMAL)
+				*tty_flag = TTY_FRAME;
+		}
+		if (lsr & UART_LSR_OE) {
+			port->icount.overrun++;
+			tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
+		}
+	}
+
+}
+
+static void ssu100_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	char *packet = urb->transfer_buffer;
+	char flag = TTY_NORMAL;
+	u32 len = urb->actual_length;
+	int i;
+	char *ch;
+
+	if ((len >= 4) &&
+	    (packet[0] == 0x1b) && (packet[1] == 0x1b) &&
+	    ((packet[2] == 0x00) || (packet[2] == 0x01))) {
+		if (packet[2] == 0x00)
+			ssu100_update_lsr(port, packet[3], &flag);
+		if (packet[2] == 0x01)
+			ssu100_update_msr(port, packet[3]);
+
+		len -= 4;
+		ch = packet + 4;
+	} else
+		ch = packet;
+
+	if (!len)
+		return;	/* status only */
+
+	if (port->sysrq) {
+		for (i = 0; i < len; i++, ch++) {
+			if (!usb_serial_handle_sysrq_char(port, *ch))
+				tty_insert_flip_char(&port->port, *ch, flag);
+		}
+	} else {
+		tty_insert_flip_string_fixed_flag(&port->port, ch, flag, len);
+	}
+
+	tty_flip_buffer_push(&port->port);
+}
+
+static struct usb_serial_driver ssu100_device = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "ssu100",
+	},
+	.description	     = DRIVER_DESC,
+	.id_table	     = id_table,
+	.num_ports	     = 1,
+	.open		     = ssu100_open,
+	.attach              = ssu100_attach,
+	.port_probe          = ssu100_port_probe,
+	.port_remove         = ssu100_port_remove,
+	.dtr_rts             = ssu100_dtr_rts,
+	.process_read_urb    = ssu100_process_read_urb,
+	.tiocmget            = ssu100_tiocmget,
+	.tiocmset            = ssu100_tiocmset,
+	.tiocmiwait          = usb_serial_generic_tiocmiwait,
+	.get_icount	     = usb_serial_generic_get_icount,
+	.set_termios         = ssu100_set_termios,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ssu100_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
new file mode 100644
index 000000000..d7f73ad6e
--- /dev/null
+++ b/drivers/usb/serial/symbolserial.c
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Symbol USB barcode to serial driver
+ *
+ * Copyright (C) 2013 Johan Hovold <jhovold@gmail.com>
+ * Copyright (C) 2009 Greg Kroah-Hartman <gregkh@suse.de>
+ * Copyright (C) 2009 Novell Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x05e0, 0x0600) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct symbol_private {
+	spinlock_t lock;	/* protects the following flags */
+	bool throttled;
+	bool actually_throttled;
+};
+
+static void symbol_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct symbol_private *priv = usb_get_serial_port_data(port);
+	unsigned char *data = urb->transfer_buffer;
+	int status = urb->status;
+	unsigned long flags;
+	int result;
+	int data_length;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
+		return;
+	default:
+		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
+		goto exit;
+	}
+
+	usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
+
+	/*
+	 * Data from the device comes with a 1 byte header:
+	 *
+	 * <size of data> <data>...
+	 */
+	if (urb->actual_length > 1) {
+		data_length = data[0];
+		if (data_length > (urb->actual_length - 1))
+			data_length = urb->actual_length - 1;
+		tty_insert_flip_string(&port->port, &data[1], data_length);
+		tty_flip_buffer_push(&port->port);
+	} else {
+		dev_dbg(&port->dev, "%s - short packet\n", __func__);
+	}
+
+exit:
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/* Continue trying to always read if we should */
+	if (!priv->throttled) {
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+		if (result)
+			dev_err(&port->dev,
+			    "%s - failed resubmitting read urb, error %d\n",
+							__func__, result);
+	} else
+		priv->actually_throttled = true;
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct symbol_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	int result = 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->throttled = false;
+	priv->actually_throttled = false;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/* Start reading from the device */
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (result)
+		dev_err(&port->dev,
+			"%s - failed resubmitting read urb, error %d\n",
+			__func__, result);
+	return result;
+}
+
+static void symbol_close(struct usb_serial_port *port)
+{
+	usb_kill_urb(port->interrupt_in_urb);
+}
+
+static void symbol_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct symbol_private *priv = usb_get_serial_port_data(port);
+
+	spin_lock_irq(&priv->lock);
+	priv->throttled = true;
+	spin_unlock_irq(&priv->lock);
+}
+
+static void symbol_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct symbol_private *priv = usb_get_serial_port_data(port);
+	int result;
+	bool was_throttled;
+
+	spin_lock_irq(&priv->lock);
+	priv->throttled = false;
+	was_throttled = priv->actually_throttled;
+	priv->actually_throttled = false;
+	spin_unlock_irq(&priv->lock);
+
+	if (was_throttled) {
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+		if (result)
+			dev_err(&port->dev,
+				"%s - failed submitting read urb, error %d\n",
+							__func__, result);
+	}
+}
+
+static int symbol_port_probe(struct usb_serial_port *port)
+{
+	struct symbol_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
+}
+
+static void symbol_port_remove(struct usb_serial_port *port)
+{
+	struct symbol_private *priv = usb_get_serial_port_data(port);
+
+	kfree(priv);
+}
+
+static struct usb_serial_driver symbol_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"symbol",
+	},
+	.id_table =		id_table,
+	.num_ports =		1,
+	.num_interrupt_in =	1,
+	.port_probe =		symbol_port_probe,
+	.port_remove =		symbol_port_remove,
+	.open =			symbol_open,
+	.close =		symbol_close,
+	.throttle = 		symbol_throttle,
+	.unthrottle =		symbol_unthrottle,
+	.read_int_callback =	symbol_int_callback,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&symbol_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
new file mode 100644
index 000000000..b99f78224
--- /dev/null
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -0,0 +1,1664 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * TI 3410/5052 USB Serial Driver
+ *
+ * Copyright (C) 2004 Texas Instruments
+ *
+ * This driver is based on the Linux io_ti driver, which is
+ *   Copyright (C) 2000-2002 Inside Out Networks
+ *   Copyright (C) 2001-2002 Greg Kroah-Hartman
+ *
+ * For questions or problems with this driver, contact Texas Instruments
+ * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
+ * Peter Berger <pberger@brimson.com>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/ioctl.h>
+#include <linux/serial.h>
+#include <linux/kfifo.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+/* Configuration ids */
+#define TI_BOOT_CONFIG			1
+#define TI_ACTIVE_CONFIG		2
+
+/* Vendor and product ids */
+#define TI_VENDOR_ID			0x0451
+#define IBM_VENDOR_ID			0x04b3
+#define STARTECH_VENDOR_ID		0x14b0
+#define TI_3410_PRODUCT_ID		0x3410
+#define IBM_4543_PRODUCT_ID		0x4543
+#define IBM_454B_PRODUCT_ID		0x454b
+#define IBM_454C_PRODUCT_ID		0x454c
+#define TI_3410_EZ430_ID		0xF430  /* TI ez430 development tool */
+#define TI_5052_BOOT_PRODUCT_ID		0x5052	/* no EEPROM, no firmware */
+#define TI_5152_BOOT_PRODUCT_ID		0x5152	/* no EEPROM, no firmware */
+#define TI_5052_EEPROM_PRODUCT_ID	0x505A	/* EEPROM, no firmware */
+#define TI_5052_FIRMWARE_PRODUCT_ID	0x505F	/* firmware is running */
+#define FRI2_PRODUCT_ID			0x5053  /* Fish River Island II */
+
+/* Multi-Tech vendor and product ids */
+#define MTS_VENDOR_ID			0x06E0
+#define MTS_GSM_NO_FW_PRODUCT_ID	0xF108
+#define MTS_CDMA_NO_FW_PRODUCT_ID	0xF109
+#define MTS_CDMA_PRODUCT_ID		0xF110
+#define MTS_GSM_PRODUCT_ID		0xF111
+#define MTS_EDGE_PRODUCT_ID		0xF112
+#define MTS_MT9234MU_PRODUCT_ID		0xF114
+#define MTS_MT9234ZBA_PRODUCT_ID	0xF115
+#define MTS_MT9234ZBAOLD_PRODUCT_ID	0x0319
+
+/* Abbott Diabetics vendor and product ids */
+#define ABBOTT_VENDOR_ID		0x1a61
+#define ABBOTT_STEREO_PLUG_ID		0x3410
+#define ABBOTT_PRODUCT_ID		ABBOTT_STEREO_PLUG_ID
+#define ABBOTT_STRIP_PORT_ID		0x3420
+
+/* Honeywell vendor and product IDs */
+#define HONEYWELL_VENDOR_ID		0x10ac
+#define HONEYWELL_HGI80_PRODUCT_ID	0x0102  /* Honeywell HGI80 */
+
+/* Moxa UPORT 11x0 vendor and product IDs */
+#define MXU1_VENDOR_ID				0x110a
+#define MXU1_1110_PRODUCT_ID			0x1110
+#define MXU1_1130_PRODUCT_ID			0x1130
+#define MXU1_1150_PRODUCT_ID			0x1150
+#define MXU1_1151_PRODUCT_ID			0x1151
+#define MXU1_1131_PRODUCT_ID			0x1131
+
+/* Commands */
+#define TI_GET_VERSION			0x01
+#define TI_GET_PORT_STATUS		0x02
+#define TI_GET_PORT_DEV_INFO		0x03
+#define TI_GET_CONFIG			0x04
+#define TI_SET_CONFIG			0x05
+#define TI_OPEN_PORT			0x06
+#define TI_CLOSE_PORT			0x07
+#define TI_START_PORT			0x08
+#define TI_STOP_PORT			0x09
+#define TI_TEST_PORT			0x0A
+#define TI_PURGE_PORT			0x0B
+#define TI_RESET_EXT_DEVICE		0x0C
+#define TI_WRITE_DATA			0x80
+#define TI_READ_DATA			0x81
+#define TI_REQ_TYPE_CLASS		0x82
+
+/* Module identifiers */
+#define TI_I2C_PORT			0x01
+#define TI_IEEE1284_PORT		0x02
+#define TI_UART1_PORT			0x03
+#define TI_UART2_PORT			0x04
+#define TI_RAM_PORT			0x05
+
+/* Modem status */
+#define TI_MSR_DELTA_CTS		0x01
+#define TI_MSR_DELTA_DSR		0x02
+#define TI_MSR_DELTA_RI			0x04
+#define TI_MSR_DELTA_CD			0x08
+#define TI_MSR_CTS			0x10
+#define TI_MSR_DSR			0x20
+#define TI_MSR_RI			0x40
+#define TI_MSR_CD			0x80
+#define TI_MSR_DELTA_MASK		0x0F
+#define TI_MSR_MASK			0xF0
+
+/* Line status */
+#define TI_LSR_OVERRUN_ERROR		0x01
+#define TI_LSR_PARITY_ERROR		0x02
+#define TI_LSR_FRAMING_ERROR		0x04
+#define TI_LSR_BREAK			0x08
+#define TI_LSR_ERROR			0x0F
+#define TI_LSR_RX_FULL			0x10
+#define TI_LSR_TX_EMPTY			0x20
+#define TI_LSR_TX_EMPTY_BOTH		0x40
+
+/* Line control */
+#define TI_LCR_BREAK			0x40
+
+/* Modem control */
+#define TI_MCR_LOOP			0x04
+#define TI_MCR_DTR			0x10
+#define TI_MCR_RTS			0x20
+
+/* Mask settings */
+#define TI_UART_ENABLE_RTS_IN		0x0001
+#define TI_UART_DISABLE_RTS		0x0002
+#define TI_UART_ENABLE_PARITY_CHECKING	0x0008
+#define TI_UART_ENABLE_DSR_OUT		0x0010
+#define TI_UART_ENABLE_CTS_OUT		0x0020
+#define TI_UART_ENABLE_X_OUT		0x0040
+#define TI_UART_ENABLE_XA_OUT		0x0080
+#define TI_UART_ENABLE_X_IN		0x0100
+#define TI_UART_ENABLE_DTR_IN		0x0800
+#define TI_UART_DISABLE_DTR		0x1000
+#define TI_UART_ENABLE_MS_INTS		0x2000
+#define TI_UART_ENABLE_AUTO_START_DMA	0x4000
+
+/* Parity */
+#define TI_UART_NO_PARITY		0x00
+#define TI_UART_ODD_PARITY		0x01
+#define TI_UART_EVEN_PARITY		0x02
+#define TI_UART_MARK_PARITY		0x03
+#define TI_UART_SPACE_PARITY		0x04
+
+/* Stop bits */
+#define TI_UART_1_STOP_BITS		0x00
+#define TI_UART_1_5_STOP_BITS		0x01
+#define TI_UART_2_STOP_BITS		0x02
+
+/* Bits per character */
+#define TI_UART_5_DATA_BITS		0x00
+#define TI_UART_6_DATA_BITS		0x01
+#define TI_UART_7_DATA_BITS		0x02
+#define TI_UART_8_DATA_BITS		0x03
+
+/* 232/485 modes */
+#define TI_UART_232			0x00
+#define TI_UART_485_RECEIVER_DISABLED	0x01
+#define TI_UART_485_RECEIVER_ENABLED	0x02
+
+/* Pipe transfer mode and timeout */
+#define TI_PIPE_MODE_CONTINUOUS		0x01
+#define TI_PIPE_MODE_MASK		0x03
+#define TI_PIPE_TIMEOUT_MASK		0x7C
+#define TI_PIPE_TIMEOUT_ENABLE		0x80
+
+/* Config struct */
+struct ti_uart_config {
+	__be16	wBaudRate;
+	__be16	wFlags;
+	u8	bDataBits;
+	u8	bParity;
+	u8	bStopBits;
+	char	cXon;
+	char	cXoff;
+	u8	bUartMode;
+};
+
+/* Get port status */
+struct ti_port_status {
+	u8 bCmdCode;
+	u8 bModuleId;
+	u8 bErrorCode;
+	u8 bMSR;
+	u8 bLSR;
+};
+
+/* Purge modes */
+#define TI_PURGE_OUTPUT			0x00
+#define TI_PURGE_INPUT			0x80
+
+/* Read/Write data */
+#define TI_RW_DATA_ADDR_SFR		0x10
+#define TI_RW_DATA_ADDR_IDATA		0x20
+#define TI_RW_DATA_ADDR_XDATA		0x30
+#define TI_RW_DATA_ADDR_CODE		0x40
+#define TI_RW_DATA_ADDR_GPIO		0x50
+#define TI_RW_DATA_ADDR_I2C		0x60
+#define TI_RW_DATA_ADDR_FLASH		0x70
+#define TI_RW_DATA_ADDR_DSP		0x80
+
+#define TI_RW_DATA_UNSPECIFIED		0x00
+#define TI_RW_DATA_BYTE			0x01
+#define TI_RW_DATA_WORD			0x02
+#define TI_RW_DATA_DOUBLE_WORD		0x04
+
+struct ti_write_data_bytes {
+	u8	bAddrType;
+	u8	bDataType;
+	u8	bDataCounter;
+	__be16	wBaseAddrHi;
+	__be16	wBaseAddrLo;
+	u8	bData[];
+} __packed;
+
+struct ti_read_data_request {
+	u8	bAddrType;
+	u8	bDataType;
+	u8	bDataCounter;
+	__be16	wBaseAddrHi;
+	__be16	wBaseAddrLo;
+} __packed;
+
+struct ti_read_data_bytes {
+	u8	bCmdCode;
+	u8	bModuleId;
+	u8	bErrorCode;
+	u8	bData[];
+};
+
+/* Interrupt struct */
+struct ti_interrupt {
+	u8	bICode;
+	u8	bIInfo;
+};
+
+/* Interrupt codes */
+#define TI_CODE_HARDWARE_ERROR		0xFF
+#define TI_CODE_DATA_ERROR		0x03
+#define TI_CODE_MODEM_STATUS		0x04
+
+/* Download firmware max packet size */
+#define TI_DOWNLOAD_MAX_PACKET_SIZE	64
+
+/* Firmware image header */
+struct ti_firmware_header {
+	__le16	wLength;
+	u8	bCheckSum;
+} __packed;
+
+/* UART addresses */
+#define TI_UART1_BASE_ADDR		0xFFA0	/* UART 1 base address */
+#define TI_UART2_BASE_ADDR		0xFFB0	/* UART 2 base address */
+#define TI_UART_OFFSET_LCR		0x0002	/* UART MCR register offset */
+#define TI_UART_OFFSET_MCR		0x0004	/* UART MCR register offset */
+
+#define TI_DRIVER_AUTHOR	"Al Borchers <alborchers@steinerpoint.com>"
+#define TI_DRIVER_DESC		"TI USB 3410/5052 Serial Driver"
+
+#define TI_FIRMWARE_BUF_SIZE	16284
+
+#define TI_TRANSFER_TIMEOUT	2
+
+/* read urb states */
+#define TI_READ_URB_RUNNING	0
+#define TI_READ_URB_STOPPING	1
+#define TI_READ_URB_STOPPED	2
+
+#define TI_EXTRA_VID_PID_COUNT	5
+
+struct ti_port {
+	int			tp_is_open;
+	u8			tp_msr;
+	u8			tp_shadow_mcr;
+	u8			tp_uart_mode;	/* 232 or 485 modes */
+	unsigned int		tp_uart_base_addr;
+	struct ti_device	*tp_tdev;
+	struct usb_serial_port	*tp_port;
+	spinlock_t		tp_lock;
+	int			tp_read_urb_state;
+	int			tp_write_urb_in_use;
+};
+
+struct ti_device {
+	struct mutex		td_open_close_lock;
+	int			td_open_port_count;
+	struct usb_serial	*td_serial;
+	int			td_is_3410;
+	bool			td_rs485_only;
+};
+
+static int ti_startup(struct usb_serial *serial);
+static void ti_release(struct usb_serial *serial);
+static int ti_port_probe(struct usb_serial_port *port);
+static void ti_port_remove(struct usb_serial_port *port);
+static int ti_open(struct tty_struct *tty, struct usb_serial_port *port);
+static void ti_close(struct usb_serial_port *port);
+static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
+		const unsigned char *data, int count);
+static unsigned int ti_write_room(struct tty_struct *tty);
+static unsigned int ti_chars_in_buffer(struct tty_struct *tty);
+static bool ti_tx_empty(struct usb_serial_port *port);
+static void ti_throttle(struct tty_struct *tty);
+static void ti_unthrottle(struct tty_struct *tty);
+static void ti_set_termios(struct tty_struct *tty,
+			   struct usb_serial_port *port,
+			   const struct ktermios *old_termios);
+static int ti_tiocmget(struct tty_struct *tty);
+static int ti_tiocmset(struct tty_struct *tty,
+		unsigned int set, unsigned int clear);
+static void ti_break(struct tty_struct *tty, int break_state);
+static void ti_interrupt_callback(struct urb *urb);
+static void ti_bulk_in_callback(struct urb *urb);
+static void ti_bulk_out_callback(struct urb *urb);
+
+static void ti_recv(struct usb_serial_port *port, unsigned char *data,
+		int length);
+static void ti_send(struct ti_port *tport);
+static int ti_set_mcr(struct ti_port *tport, unsigned int mcr);
+static int ti_get_lsr(struct ti_port *tport, u8 *lsr);
+static void ti_get_serial_info(struct tty_struct *tty, struct serial_struct *ss);
+static void ti_handle_new_msr(struct ti_port *tport, u8 msr);
+
+static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty);
+static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty);
+
+static int ti_command_out_sync(struct usb_device *udev, u8 command,
+		u16 moduleid, u16 value, void *data, int size);
+static int ti_command_in_sync(struct usb_device *udev, u8 command,
+		u16 moduleid, u16 value, void *data, int size);
+static int ti_port_cmd_out(struct usb_serial_port *port, u8 command,
+		u16 value, void *data, int size);
+static int ti_port_cmd_in(struct usb_serial_port *port, u8 command,
+		u16 value, void *data, int size);
+
+static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev,
+			 unsigned long addr, u8 mask, u8 byte);
+
+static int ti_download_firmware(struct ti_device *tdev);
+
+static const struct usb_device_id ti_id_table_3410[] = {
+	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
+	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) },
+	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
+	{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
+	{ USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
+	{ USB_DEVICE(STARTECH_VENDOR_ID, TI_3410_PRODUCT_ID) },
+	{ }	/* terminator */
+};
+
+static const struct usb_device_id ti_id_table_5052[] = {
+	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
+	{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
+	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
+	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
+	{ }
+};
+
+static const struct usb_device_id ti_id_table_combined[] = {
+	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
+	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
+	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
+	{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
+	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
+	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
+	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
+	{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
+	{ USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
+	{ USB_DEVICE(STARTECH_VENDOR_ID, TI_3410_PRODUCT_ID) },
+	{ }	/* terminator */
+};
+
+static struct usb_serial_driver ti_1port_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "ti_usb_3410_5052_1",
+	},
+	.description		= "TI USB 3410 1 port adapter",
+	.id_table		= ti_id_table_3410,
+	.num_ports		= 1,
+	.num_bulk_out		= 1,
+	.attach			= ti_startup,
+	.release		= ti_release,
+	.port_probe		= ti_port_probe,
+	.port_remove		= ti_port_remove,
+	.open			= ti_open,
+	.close			= ti_close,
+	.write			= ti_write,
+	.write_room		= ti_write_room,
+	.chars_in_buffer	= ti_chars_in_buffer,
+	.tx_empty		= ti_tx_empty,
+	.throttle		= ti_throttle,
+	.unthrottle		= ti_unthrottle,
+	.get_serial		= ti_get_serial_info,
+	.set_termios		= ti_set_termios,
+	.tiocmget		= ti_tiocmget,
+	.tiocmset		= ti_tiocmset,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
+	.break_ctl		= ti_break,
+	.read_int_callback	= ti_interrupt_callback,
+	.read_bulk_callback	= ti_bulk_in_callback,
+	.write_bulk_callback	= ti_bulk_out_callback,
+};
+
+static struct usb_serial_driver ti_2port_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "ti_usb_3410_5052_2",
+	},
+	.description		= "TI USB 5052 2 port adapter",
+	.id_table		= ti_id_table_5052,
+	.num_ports		= 2,
+	.num_bulk_out		= 1,
+	.attach			= ti_startup,
+	.release		= ti_release,
+	.port_probe		= ti_port_probe,
+	.port_remove		= ti_port_remove,
+	.open			= ti_open,
+	.close			= ti_close,
+	.write			= ti_write,
+	.write_room		= ti_write_room,
+	.chars_in_buffer	= ti_chars_in_buffer,
+	.tx_empty		= ti_tx_empty,
+	.throttle		= ti_throttle,
+	.unthrottle		= ti_unthrottle,
+	.get_serial		= ti_get_serial_info,
+	.set_termios		= ti_set_termios,
+	.tiocmget		= ti_tiocmget,
+	.tiocmset		= ti_tiocmset,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
+	.break_ctl		= ti_break,
+	.read_int_callback	= ti_interrupt_callback,
+	.read_bulk_callback	= ti_bulk_in_callback,
+	.write_bulk_callback	= ti_bulk_out_callback,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ti_1port_device, &ti_2port_device, NULL
+};
+
+MODULE_AUTHOR(TI_DRIVER_AUTHOR);
+MODULE_DESCRIPTION(TI_DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+MODULE_FIRMWARE("ti_3410.fw");
+MODULE_FIRMWARE("ti_5052.fw");
+MODULE_FIRMWARE("mts_cdma.fw");
+MODULE_FIRMWARE("mts_gsm.fw");
+MODULE_FIRMWARE("mts_edge.fw");
+MODULE_FIRMWARE("mts_mt9234mu.fw");
+MODULE_FIRMWARE("mts_mt9234zba.fw");
+MODULE_FIRMWARE("moxa/moxa-1110.fw");
+MODULE_FIRMWARE("moxa/moxa-1130.fw");
+MODULE_FIRMWARE("moxa/moxa-1131.fw");
+MODULE_FIRMWARE("moxa/moxa-1150.fw");
+MODULE_FIRMWARE("moxa/moxa-1151.fw");
+
+MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
+
+module_usb_serial_driver(serial_drivers, ti_id_table_combined);
+
+static int ti_startup(struct usb_serial *serial)
+{
+	struct ti_device *tdev;
+	struct usb_device *dev = serial->dev;
+	struct usb_host_interface *cur_altsetting;
+	int num_endpoints;
+	u16 vid, pid;
+	int status;
+
+	dev_dbg(&dev->dev,
+		"%s - product 0x%4X, num configurations %d, configuration value %d\n",
+		__func__, le16_to_cpu(dev->descriptor.idProduct),
+		dev->descriptor.bNumConfigurations,
+		dev->actconfig->desc.bConfigurationValue);
+
+	tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL);
+	if (!tdev)
+		return -ENOMEM;
+
+	mutex_init(&tdev->td_open_close_lock);
+	tdev->td_serial = serial;
+	usb_set_serial_data(serial, tdev);
+
+	/* determine device type */
+	if (serial->type == &ti_1port_device)
+		tdev->td_is_3410 = 1;
+	dev_dbg(&dev->dev, "%s - device type is %s\n", __func__,
+		tdev->td_is_3410 ? "3410" : "5052");
+
+	vid = le16_to_cpu(dev->descriptor.idVendor);
+	pid = le16_to_cpu(dev->descriptor.idProduct);
+	if (vid == MXU1_VENDOR_ID) {
+		switch (pid) {
+		case MXU1_1130_PRODUCT_ID:
+		case MXU1_1131_PRODUCT_ID:
+			tdev->td_rs485_only = true;
+			break;
+		}
+	}
+
+	cur_altsetting = serial->interface->cur_altsetting;
+	num_endpoints = cur_altsetting->desc.bNumEndpoints;
+
+	/* if we have only 1 configuration and 1 endpoint, download firmware */
+	if (dev->descriptor.bNumConfigurations == 1 && num_endpoints == 1) {
+		status = ti_download_firmware(tdev);
+
+		if (status != 0)
+			goto free_tdev;
+
+		/* 3410 must be reset, 5052 resets itself */
+		if (tdev->td_is_3410) {
+			msleep_interruptible(100);
+			usb_reset_device(dev);
+		}
+
+		status = -ENODEV;
+		goto free_tdev;
+	}
+
+	/* the second configuration must be set */
+	if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
+		status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
+		status = status ? status : -ENODEV;
+		goto free_tdev;
+	}
+
+	if (serial->num_bulk_in < serial->num_ports ||
+			serial->num_bulk_out < serial->num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		status = -ENODEV;
+		goto free_tdev;
+	}
+
+	return 0;
+
+free_tdev:
+	kfree(tdev);
+	usb_set_serial_data(serial, NULL);
+	return status;
+}
+
+
+static void ti_release(struct usb_serial *serial)
+{
+	struct ti_device *tdev = usb_get_serial_data(serial);
+
+	kfree(tdev);
+}
+
+static int ti_port_probe(struct usb_serial_port *port)
+{
+	struct ti_port *tport;
+
+	tport = kzalloc(sizeof(*tport), GFP_KERNEL);
+	if (!tport)
+		return -ENOMEM;
+
+	spin_lock_init(&tport->tp_lock);
+	if (port == port->serial->port[0])
+		tport->tp_uart_base_addr = TI_UART1_BASE_ADDR;
+	else
+		tport->tp_uart_base_addr = TI_UART2_BASE_ADDR;
+	tport->tp_port = port;
+	tport->tp_tdev = usb_get_serial_data(port->serial);
+
+	if (tport->tp_tdev->td_rs485_only)
+		tport->tp_uart_mode = TI_UART_485_RECEIVER_DISABLED;
+	else
+		tport->tp_uart_mode = TI_UART_232;
+
+	usb_set_serial_port_data(port, tport);
+
+	/*
+	 * The TUSB5052 LSR does not tell when the transmitter shift register
+	 * has emptied so add a one-character drain delay.
+	 */
+	if (!tport->tp_tdev->td_is_3410)
+		port->port.drain_delay = 1;
+
+	return 0;
+}
+
+static void ti_port_remove(struct usb_serial_port *port)
+{
+	struct ti_port *tport;
+
+	tport = usb_get_serial_port_data(port);
+	kfree(tport);
+}
+
+static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct ti_port *tport = usb_get_serial_port_data(port);
+	struct ti_device *tdev;
+	struct usb_device *dev;
+	struct urb *urb;
+	int status;
+	u16 open_settings;
+
+	open_settings = (TI_PIPE_MODE_CONTINUOUS |
+			 TI_PIPE_TIMEOUT_ENABLE |
+			 (TI_TRANSFER_TIMEOUT << 2));
+
+	dev = port->serial->dev;
+	tdev = tport->tp_tdev;
+
+	/* only one open on any port on a device at a time */
+	if (mutex_lock_interruptible(&tdev->td_open_close_lock))
+		return -ERESTARTSYS;
+
+	tport->tp_msr = 0;
+	tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR);
+
+	/* start interrupt urb the first time a port is opened on this device */
+	if (tdev->td_open_port_count == 0) {
+		dev_dbg(&port->dev, "%s - start interrupt in urb\n", __func__);
+		urb = tdev->td_serial->port[0]->interrupt_in_urb;
+		if (!urb) {
+			dev_err(&port->dev, "%s - no interrupt urb\n", __func__);
+			status = -EINVAL;
+			goto release_lock;
+		}
+		urb->context = tdev;
+		status = usb_submit_urb(urb, GFP_KERNEL);
+		if (status) {
+			dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __func__, status);
+			goto release_lock;
+		}
+	}
+
+	if (tty)
+		ti_set_termios(tty, port, &tty->termios);
+
+	status = ti_port_cmd_out(port, TI_OPEN_PORT, open_settings, NULL, 0);
+	if (status) {
+		dev_err(&port->dev, "%s - cannot send open command, %d\n",
+			__func__, status);
+		goto unlink_int_urb;
+	}
+
+	status = ti_port_cmd_out(port, TI_START_PORT, 0, NULL, 0);
+	if (status) {
+		dev_err(&port->dev, "%s - cannot send start command, %d\n",
+							__func__, status);
+		goto unlink_int_urb;
+	}
+
+	status = ti_port_cmd_out(port, TI_PURGE_PORT, TI_PURGE_INPUT, NULL, 0);
+	if (status) {
+		dev_err(&port->dev, "%s - cannot clear input buffers, %d\n",
+							__func__, status);
+		goto unlink_int_urb;
+	}
+	status = ti_port_cmd_out(port, TI_PURGE_PORT, TI_PURGE_OUTPUT, NULL, 0);
+	if (status) {
+		dev_err(&port->dev, "%s - cannot clear output buffers, %d\n",
+							__func__, status);
+		goto unlink_int_urb;
+	}
+
+	/* reset the data toggle on the bulk endpoints to work around bug in
+	 * host controllers where things get out of sync some times */
+	usb_clear_halt(dev, port->write_urb->pipe);
+	usb_clear_halt(dev, port->read_urb->pipe);
+
+	if (tty)
+		ti_set_termios(tty, port, &tty->termios);
+
+	status = ti_port_cmd_out(port, TI_OPEN_PORT, open_settings, NULL, 0);
+	if (status) {
+		dev_err(&port->dev, "%s - cannot send open command (2), %d\n",
+							__func__, status);
+		goto unlink_int_urb;
+	}
+
+	status = ti_port_cmd_out(port, TI_START_PORT, 0, NULL, 0);
+	if (status) {
+		dev_err(&port->dev, "%s - cannot send start command (2), %d\n",
+							__func__, status);
+		goto unlink_int_urb;
+	}
+
+	/* start read urb */
+	urb = port->read_urb;
+	if (!urb) {
+		dev_err(&port->dev, "%s - no read urb\n", __func__);
+		status = -EINVAL;
+		goto unlink_int_urb;
+	}
+	tport->tp_read_urb_state = TI_READ_URB_RUNNING;
+	urb->context = tport;
+	status = usb_submit_urb(urb, GFP_KERNEL);
+	if (status) {
+		dev_err(&port->dev, "%s - submit read urb failed, %d\n",
+							__func__, status);
+		goto unlink_int_urb;
+	}
+
+	tport->tp_is_open = 1;
+	++tdev->td_open_port_count;
+
+	goto release_lock;
+
+unlink_int_urb:
+	if (tdev->td_open_port_count == 0)
+		usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
+release_lock:
+	mutex_unlock(&tdev->td_open_close_lock);
+	return status;
+}
+
+
+static void ti_close(struct usb_serial_port *port)
+{
+	struct ti_device *tdev;
+	struct ti_port *tport;
+	int status;
+	unsigned long flags;
+
+	tdev = usb_get_serial_data(port->serial);
+	tport = usb_get_serial_port_data(port);
+
+	tport->tp_is_open = 0;
+
+	usb_kill_urb(port->read_urb);
+	usb_kill_urb(port->write_urb);
+	tport->tp_write_urb_in_use = 0;
+	spin_lock_irqsave(&tport->tp_lock, flags);
+	kfifo_reset_out(&port->write_fifo);
+	spin_unlock_irqrestore(&tport->tp_lock, flags);
+
+	status = ti_port_cmd_out(port, TI_CLOSE_PORT, 0, NULL, 0);
+	if (status)
+		dev_err(&port->dev,
+			"%s - cannot send close port command, %d\n"
+							, __func__, status);
+
+	mutex_lock(&tdev->td_open_close_lock);
+	--tdev->td_open_port_count;
+	if (tdev->td_open_port_count == 0) {
+		/* last port is closed, shut down interrupt urb */
+		usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
+	}
+	mutex_unlock(&tdev->td_open_close_lock);
+}
+
+
+static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *data, int count)
+{
+	struct ti_port *tport = usb_get_serial_port_data(port);
+
+	if (count == 0) {
+		return 0;
+	}
+
+	if (!tport->tp_is_open)
+		return -ENODEV;
+
+	count = kfifo_in_locked(&port->write_fifo, data, count,
+							&tport->tp_lock);
+	ti_send(tport);
+
+	return count;
+}
+
+
+static unsigned int ti_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ti_port *tport = usb_get_serial_port_data(port);
+	unsigned int room;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tport->tp_lock, flags);
+	room = kfifo_avail(&port->write_fifo);
+	spin_unlock_irqrestore(&tport->tp_lock, flags);
+
+	dev_dbg(&port->dev, "%s - returns %u\n", __func__, room);
+	return room;
+}
+
+
+static unsigned int ti_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ti_port *tport = usb_get_serial_port_data(port);
+	unsigned int chars;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tport->tp_lock, flags);
+	chars = kfifo_len(&port->write_fifo);
+	spin_unlock_irqrestore(&tport->tp_lock, flags);
+
+	dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars);
+	return chars;
+}
+
+static bool ti_tx_empty(struct usb_serial_port *port)
+{
+	struct ti_port *tport = usb_get_serial_port_data(port);
+	u8 lsr, mask;
+	int ret;
+
+	/*
+	 * TUSB5052 does not have the TEMT bit to tell if the shift register
+	 * is empty.
+	 */
+	if (tport->tp_tdev->td_is_3410)
+		mask = TI_LSR_TX_EMPTY_BOTH;
+	else
+		mask = TI_LSR_TX_EMPTY;
+
+	ret = ti_get_lsr(tport, &lsr);
+	if (!ret && !(lsr & mask))
+		return false;
+
+	return true;
+}
+
+static void ti_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ti_port *tport = usb_get_serial_port_data(port);
+
+	if (I_IXOFF(tty) || C_CRTSCTS(tty))
+		ti_stop_read(tport, tty);
+
+}
+
+
+static void ti_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ti_port *tport = usb_get_serial_port_data(port);
+	int status;
+
+	if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
+		status = ti_restart_read(tport, tty);
+		if (status)
+			dev_err(&port->dev, "%s - cannot restart read, %d\n",
+							__func__, status);
+	}
+}
+
+static void ti_set_termios(struct tty_struct *tty,
+			   struct usb_serial_port *port,
+			   const struct ktermios *old_termios)
+{
+	struct ti_port *tport = usb_get_serial_port_data(port);
+	struct ti_uart_config *config;
+	int baud;
+	int status;
+	unsigned int mcr;
+	u16 wbaudrate;
+	u16 wflags = 0;
+
+	config = kmalloc(sizeof(*config), GFP_KERNEL);
+	if (!config)
+		return;
+
+	/* these flags must be set */
+	wflags |= TI_UART_ENABLE_MS_INTS;
+	wflags |= TI_UART_ENABLE_AUTO_START_DMA;
+	config->bUartMode = tport->tp_uart_mode;
+
+	switch (C_CSIZE(tty)) {
+	case CS5:
+		config->bDataBits = TI_UART_5_DATA_BITS;
+		break;
+	case CS6:
+		config->bDataBits = TI_UART_6_DATA_BITS;
+		break;
+	case CS7:
+		config->bDataBits = TI_UART_7_DATA_BITS;
+		break;
+	default:
+	case CS8:
+		config->bDataBits = TI_UART_8_DATA_BITS;
+		break;
+	}
+
+	/* CMSPAR isn't supported by this driver */
+	tty->termios.c_cflag &= ~CMSPAR;
+
+	if (C_PARENB(tty)) {
+		if (C_PARODD(tty)) {
+			wflags |= TI_UART_ENABLE_PARITY_CHECKING;
+			config->bParity = TI_UART_ODD_PARITY;
+		} else {
+			wflags |= TI_UART_ENABLE_PARITY_CHECKING;
+			config->bParity = TI_UART_EVEN_PARITY;
+		}
+	} else {
+		wflags &= ~TI_UART_ENABLE_PARITY_CHECKING;
+		config->bParity = TI_UART_NO_PARITY;
+	}
+
+	if (C_CSTOPB(tty))
+		config->bStopBits = TI_UART_2_STOP_BITS;
+	else
+		config->bStopBits = TI_UART_1_STOP_BITS;
+
+	if (C_CRTSCTS(tty)) {
+		/* RTS flow control must be off to drop RTS for baud rate B0 */
+		if ((C_BAUD(tty)) != B0)
+			wflags |= TI_UART_ENABLE_RTS_IN;
+		wflags |= TI_UART_ENABLE_CTS_OUT;
+	} else {
+		ti_restart_read(tport, tty);
+	}
+
+	if (I_IXOFF(tty) || I_IXON(tty)) {
+		config->cXon  = START_CHAR(tty);
+		config->cXoff = STOP_CHAR(tty);
+
+		if (I_IXOFF(tty))
+			wflags |= TI_UART_ENABLE_X_IN;
+		else
+			ti_restart_read(tport, tty);
+
+		if (I_IXON(tty))
+			wflags |= TI_UART_ENABLE_X_OUT;
+	}
+
+	baud = tty_get_baud_rate(tty);
+	if (!baud)
+		baud = 9600;
+	if (tport->tp_tdev->td_is_3410)
+		wbaudrate = (923077 + baud/2) / baud;
+	else
+		wbaudrate = (461538 + baud/2) / baud;
+
+	/* FIXME: Should calculate resulting baud here and report it back */
+	if ((C_BAUD(tty)) != B0)
+		tty_encode_baud_rate(tty, baud, baud);
+
+	dev_dbg(&port->dev,
+		"%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d\n",
+		__func__, baud, wbaudrate, wflags,
+		config->bDataBits, config->bParity, config->bStopBits,
+		config->cXon, config->cXoff, config->bUartMode);
+
+	config->wBaudRate = cpu_to_be16(wbaudrate);
+	config->wFlags = cpu_to_be16(wflags);
+
+	status = ti_port_cmd_out(port, TI_SET_CONFIG, 0, config,
+			sizeof(*config));
+	if (status)
+		dev_err(&port->dev, "%s - cannot set config on port %d, %d\n",
+				__func__, port->port_number, status);
+
+	/* SET_CONFIG asserts RTS and DTR, reset them correctly */
+	mcr = tport->tp_shadow_mcr;
+	/* if baud rate is B0, clear RTS and DTR */
+	if (C_BAUD(tty) == B0)
+		mcr &= ~(TI_MCR_DTR | TI_MCR_RTS);
+	status = ti_set_mcr(tport, mcr);
+	if (status)
+		dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n",
+				__func__, port->port_number, status);
+
+	kfree(config);
+}
+
+
+static int ti_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ti_port *tport = usb_get_serial_port_data(port);
+	unsigned int result;
+	unsigned int msr;
+	unsigned int mcr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tport->tp_lock, flags);
+	msr = tport->tp_msr;
+	mcr = tport->tp_shadow_mcr;
+	spin_unlock_irqrestore(&tport->tp_lock, flags);
+
+	result = ((mcr & TI_MCR_DTR) ? TIOCM_DTR : 0)
+		| ((mcr & TI_MCR_RTS) ? TIOCM_RTS : 0)
+		| ((mcr & TI_MCR_LOOP) ? TIOCM_LOOP : 0)
+		| ((msr & TI_MSR_CTS) ? TIOCM_CTS : 0)
+		| ((msr & TI_MSR_CD) ? TIOCM_CAR : 0)
+		| ((msr & TI_MSR_RI) ? TIOCM_RI : 0)
+		| ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0);
+
+	dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);
+
+	return result;
+}
+
+
+static int ti_tiocmset(struct tty_struct *tty,
+				unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ti_port *tport = usb_get_serial_port_data(port);
+	unsigned int mcr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tport->tp_lock, flags);
+	mcr = tport->tp_shadow_mcr;
+
+	if (set & TIOCM_RTS)
+		mcr |= TI_MCR_RTS;
+	if (set & TIOCM_DTR)
+		mcr |= TI_MCR_DTR;
+	if (set & TIOCM_LOOP)
+		mcr |= TI_MCR_LOOP;
+
+	if (clear & TIOCM_RTS)
+		mcr &= ~TI_MCR_RTS;
+	if (clear & TIOCM_DTR)
+		mcr &= ~TI_MCR_DTR;
+	if (clear & TIOCM_LOOP)
+		mcr &= ~TI_MCR_LOOP;
+	spin_unlock_irqrestore(&tport->tp_lock, flags);
+
+	return ti_set_mcr(tport, mcr);
+}
+
+
+static void ti_break(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ti_port *tport = usb_get_serial_port_data(port);
+	int status;
+
+	dev_dbg(&port->dev, "%s - state = %d\n", __func__, break_state);
+
+	status = ti_write_byte(port, tport->tp_tdev,
+		tport->tp_uart_base_addr + TI_UART_OFFSET_LCR,
+		TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0);
+
+	if (status)
+		dev_dbg(&port->dev, "%s - error setting break, %d\n", __func__, status);
+}
+
+static int ti_get_port_from_code(unsigned char code)
+{
+	return (code >> 6) & 0x01;
+}
+
+static int ti_get_func_from_code(unsigned char code)
+{
+	return code & 0x0f;
+}
+
+static void ti_interrupt_callback(struct urb *urb)
+{
+	struct ti_device *tdev = urb->context;
+	struct usb_serial_port *port;
+	struct usb_serial *serial = tdev->td_serial;
+	struct ti_port *tport;
+	struct device *dev = &urb->dev->dev;
+	unsigned char *data = urb->transfer_buffer;
+	int length = urb->actual_length;
+	int port_number;
+	int function;
+	int status = urb->status;
+	int retval;
+	u8 msr;
+
+	switch (status) {
+	case 0:
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status);
+		return;
+	default:
+		dev_err(dev, "%s - nonzero urb status, %d\n", __func__, status);
+		goto exit;
+	}
+
+	if (length != 2) {
+		dev_dbg(dev, "%s - bad packet size, %d\n", __func__, length);
+		goto exit;
+	}
+
+	if (data[0] == TI_CODE_HARDWARE_ERROR) {
+		dev_err(dev, "%s - hardware error, %d\n", __func__, data[1]);
+		goto exit;
+	}
+
+	port_number = ti_get_port_from_code(data[0]);
+	function = ti_get_func_from_code(data[0]);
+
+	dev_dbg(dev, "%s - port_number %d, function %d, data 0x%02X\n",
+		__func__, port_number, function, data[1]);
+
+	if (port_number >= serial->num_ports) {
+		dev_err(dev, "%s - bad port number, %d\n",
+						__func__, port_number);
+		goto exit;
+	}
+
+	port = serial->port[port_number];
+
+	tport = usb_get_serial_port_data(port);
+	if (!tport)
+		goto exit;
+
+	switch (function) {
+	case TI_CODE_DATA_ERROR:
+		dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n",
+			__func__, port_number, data[1]);
+		break;
+
+	case TI_CODE_MODEM_STATUS:
+		msr = data[1];
+		dev_dbg(dev, "%s - port %d, msr 0x%02X\n", __func__, port_number, msr);
+		ti_handle_new_msr(tport, msr);
+		break;
+
+	default:
+		dev_err(dev, "%s - unknown interrupt code, 0x%02X\n",
+							__func__, data[1]);
+		break;
+	}
+
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(dev, "%s - resubmit interrupt urb failed, %d\n",
+			__func__, retval);
+}
+
+
+static void ti_bulk_in_callback(struct urb *urb)
+{
+	struct ti_port *tport = urb->context;
+	struct usb_serial_port *port = tport->tp_port;
+	struct device *dev = &urb->dev->dev;
+	int status = urb->status;
+	unsigned long flags;
+	int retval = 0;
+
+	switch (status) {
+	case 0:
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status);
+		return;
+	default:
+		dev_err(dev, "%s - nonzero urb status, %d\n",
+			__func__, status);
+	}
+
+	if (status == -EPIPE)
+		goto exit;
+
+	if (status) {
+		dev_err(dev, "%s - stopping read!\n", __func__);
+		return;
+	}
+
+	if (urb->actual_length) {
+		usb_serial_debug_data(dev, __func__, urb->actual_length,
+				      urb->transfer_buffer);
+
+		if (!tport->tp_is_open)
+			dev_dbg(dev, "%s - port closed, dropping data\n",
+				__func__);
+		else
+			ti_recv(port, urb->transfer_buffer, urb->actual_length);
+		spin_lock_irqsave(&tport->tp_lock, flags);
+		port->icount.rx += urb->actual_length;
+		spin_unlock_irqrestore(&tport->tp_lock, flags);
+	}
+
+exit:
+	/* continue to read unless stopping */
+	spin_lock_irqsave(&tport->tp_lock, flags);
+	if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
+		retval = usb_submit_urb(urb, GFP_ATOMIC);
+	else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING)
+		tport->tp_read_urb_state = TI_READ_URB_STOPPED;
+
+	spin_unlock_irqrestore(&tport->tp_lock, flags);
+	if (retval)
+		dev_err(dev, "%s - resubmit read urb failed, %d\n",
+			__func__, retval);
+}
+
+
+static void ti_bulk_out_callback(struct urb *urb)
+{
+	struct ti_port *tport = urb->context;
+	struct usb_serial_port *port = tport->tp_port;
+	int status = urb->status;
+
+	tport->tp_write_urb_in_use = 0;
+
+	switch (status) {
+	case 0:
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		dev_dbg(&port->dev, "%s - urb shutting down, %d\n", __func__, status);
+		return;
+	default:
+		dev_err_console(port, "%s - nonzero urb status, %d\n",
+			__func__, status);
+	}
+
+	/* send any buffered data */
+	ti_send(tport);
+}
+
+
+static void ti_recv(struct usb_serial_port *port, unsigned char *data,
+		int length)
+{
+	int cnt;
+
+	do {
+		cnt = tty_insert_flip_string(&port->port, data, length);
+		if (cnt < length) {
+			dev_err(&port->dev, "%s - dropping data, %d bytes lost\n",
+						__func__, length - cnt);
+			if (cnt == 0)
+				break;
+		}
+		tty_flip_buffer_push(&port->port);
+		data += cnt;
+		length -= cnt;
+	} while (length > 0);
+}
+
+
+static void ti_send(struct ti_port *tport)
+{
+	int count, result;
+	struct usb_serial_port *port = tport->tp_port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tport->tp_lock, flags);
+
+	if (tport->tp_write_urb_in_use)
+		goto unlock;
+
+	count = kfifo_out(&port->write_fifo,
+				port->write_urb->transfer_buffer,
+				port->bulk_out_size);
+
+	if (count == 0)
+		goto unlock;
+
+	tport->tp_write_urb_in_use = 1;
+
+	spin_unlock_irqrestore(&tport->tp_lock, flags);
+
+	usb_serial_debug_data(&port->dev, __func__, count,
+			      port->write_urb->transfer_buffer);
+
+	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
+			   usb_sndbulkpipe(port->serial->dev,
+					    port->bulk_out_endpointAddress),
+			   port->write_urb->transfer_buffer, count,
+			   ti_bulk_out_callback, tport);
+
+	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+	if (result) {
+		dev_err_console(port, "%s - submit write urb failed, %d\n",
+							__func__, result);
+		tport->tp_write_urb_in_use = 0;
+		/* TODO: reschedule ti_send */
+	} else {
+		spin_lock_irqsave(&tport->tp_lock, flags);
+		port->icount.tx += count;
+		spin_unlock_irqrestore(&tport->tp_lock, flags);
+	}
+
+	/* more room in the buffer for new writes, wakeup */
+	tty_port_tty_wakeup(&port->port);
+
+	return;
+unlock:
+	spin_unlock_irqrestore(&tport->tp_lock, flags);
+	return;
+}
+
+
+static int ti_set_mcr(struct ti_port *tport, unsigned int mcr)
+{
+	unsigned long flags;
+	int status;
+
+	status = ti_write_byte(tport->tp_port, tport->tp_tdev,
+		tport->tp_uart_base_addr + TI_UART_OFFSET_MCR,
+		TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr);
+
+	spin_lock_irqsave(&tport->tp_lock, flags);
+	if (!status)
+		tport->tp_shadow_mcr = mcr;
+	spin_unlock_irqrestore(&tport->tp_lock, flags);
+
+	return status;
+}
+
+
+static int ti_get_lsr(struct ti_port *tport, u8 *lsr)
+{
+	int size, status;
+	struct usb_serial_port *port = tport->tp_port;
+	struct ti_port_status *data;
+
+	size = sizeof(struct ti_port_status);
+	data = kmalloc(size, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	status = ti_port_cmd_in(port, TI_GET_PORT_STATUS, 0, data, size);
+	if (status) {
+		dev_err(&port->dev,
+			"%s - get port status command failed, %d\n",
+							__func__, status);
+		goto free_data;
+	}
+
+	dev_dbg(&port->dev, "%s - lsr 0x%02X\n", __func__, data->bLSR);
+
+	*lsr = data->bLSR;
+
+free_data:
+	kfree(data);
+	return status;
+}
+
+
+static void ti_get_serial_info(struct tty_struct *tty, struct serial_struct *ss)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ti_port *tport = usb_get_serial_port_data(port);
+
+	ss->baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800;
+}
+
+
+static void ti_handle_new_msr(struct ti_port *tport, u8 msr)
+{
+	struct async_icount *icount;
+	struct tty_struct *tty;
+	unsigned long flags;
+
+	dev_dbg(&tport->tp_port->dev, "%s - msr 0x%02X\n", __func__, msr);
+
+	if (msr & TI_MSR_DELTA_MASK) {
+		spin_lock_irqsave(&tport->tp_lock, flags);
+		icount = &tport->tp_port->icount;
+		if (msr & TI_MSR_DELTA_CTS)
+			icount->cts++;
+		if (msr & TI_MSR_DELTA_DSR)
+			icount->dsr++;
+		if (msr & TI_MSR_DELTA_CD)
+			icount->dcd++;
+		if (msr & TI_MSR_DELTA_RI)
+			icount->rng++;
+		wake_up_interruptible(&tport->tp_port->port.delta_msr_wait);
+		spin_unlock_irqrestore(&tport->tp_lock, flags);
+	}
+
+	tport->tp_msr = msr & TI_MSR_MASK;
+
+	/* handle CTS flow control */
+	tty = tty_port_tty_get(&tport->tp_port->port);
+	if (tty && C_CRTSCTS(tty)) {
+		if (msr & TI_MSR_CTS)
+			tty_wakeup(tty);
+	}
+	tty_kref_put(tty);
+}
+
+
+static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&tport->tp_lock, flags);
+
+	if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
+		tport->tp_read_urb_state = TI_READ_URB_STOPPING;
+
+	spin_unlock_irqrestore(&tport->tp_lock, flags);
+}
+
+
+static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty)
+{
+	struct urb *urb;
+	int status = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tport->tp_lock, flags);
+
+	if (tport->tp_read_urb_state == TI_READ_URB_STOPPED) {
+		tport->tp_read_urb_state = TI_READ_URB_RUNNING;
+		urb = tport->tp_port->read_urb;
+		spin_unlock_irqrestore(&tport->tp_lock, flags);
+		urb->context = tport;
+		status = usb_submit_urb(urb, GFP_KERNEL);
+	} else  {
+		tport->tp_read_urb_state = TI_READ_URB_RUNNING;
+		spin_unlock_irqrestore(&tport->tp_lock, flags);
+	}
+
+	return status;
+}
+
+static int ti_command_out_sync(struct usb_device *udev, u8 command,
+		u16 moduleid, u16 value, void *data, int size)
+{
+	int status;
+
+	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), command,
+			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+			value, moduleid, data, size, 1000);
+	if (status < 0)
+		return status;
+
+	return 0;
+}
+
+static int ti_command_in_sync(struct usb_device *udev, u8 command,
+		u16 moduleid, u16 value, void *data, int size)
+{
+	int status;
+
+	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), command,
+			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+			value, moduleid, data, size, 1000);
+	if (status == size)
+		status = 0;
+	else if (status >= 0)
+		status = -ECOMM;
+
+	return status;
+}
+
+static int ti_port_cmd_out(struct usb_serial_port *port, u8 command,
+		u16 value, void *data, int size)
+{
+	return ti_command_out_sync(port->serial->dev, command,
+			TI_UART1_PORT + port->port_number,
+			value, data, size);
+}
+
+static int ti_port_cmd_in(struct usb_serial_port *port, u8 command,
+		u16 value, void *data, int size)
+{
+	return ti_command_in_sync(port->serial->dev, command,
+			TI_UART1_PORT + port->port_number,
+			value, data, size);
+}
+
+static int ti_write_byte(struct usb_serial_port *port,
+			 struct ti_device *tdev, unsigned long addr,
+			 u8 mask, u8 byte)
+{
+	int status;
+	unsigned int size;
+	struct ti_write_data_bytes *data;
+
+	dev_dbg(&port->dev, "%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X\n", __func__,
+		addr, mask, byte);
+
+	size = sizeof(struct ti_write_data_bytes) + 2;
+	data = kmalloc(size, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->bAddrType = TI_RW_DATA_ADDR_XDATA;
+	data->bDataType = TI_RW_DATA_BYTE;
+	data->bDataCounter = 1;
+	data->wBaseAddrHi = cpu_to_be16(addr>>16);
+	data->wBaseAddrLo = cpu_to_be16(addr);
+	data->bData[0] = mask;
+	data->bData[1] = byte;
+
+	status = ti_command_out_sync(port->serial->dev, TI_WRITE_DATA,
+			TI_RAM_PORT, 0, data, size);
+	if (status < 0)
+		dev_err(&port->dev, "%s - failed, %d\n", __func__, status);
+
+	kfree(data);
+
+	return status;
+}
+
+static int ti_do_download(struct usb_device *dev, int pipe,
+						u8 *buffer, int size)
+{
+	int pos;
+	u8 cs = 0;
+	int done;
+	struct ti_firmware_header *header;
+	int status = 0;
+	int len;
+
+	for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
+		cs = (u8)(cs + buffer[pos]);
+
+	header = (struct ti_firmware_header *)buffer;
+	header->wLength = cpu_to_le16(size - sizeof(*header));
+	header->bCheckSum = cs;
+
+	dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__);
+	for (pos = 0; pos < size; pos += done) {
+		len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
+		status = usb_bulk_msg(dev, pipe, buffer + pos, len,
+								&done, 1000);
+		if (status)
+			break;
+	}
+	return status;
+}
+
+static int ti_download_firmware(struct ti_device *tdev)
+{
+	int status;
+	int buffer_size;
+	u8 *buffer;
+	struct usb_device *dev = tdev->td_serial->dev;
+	unsigned int pipe = usb_sndbulkpipe(dev,
+		tdev->td_serial->port[0]->bulk_out_endpointAddress);
+	const struct firmware *fw_p;
+	char buf[32];
+
+	if (le16_to_cpu(dev->descriptor.idVendor) == MXU1_VENDOR_ID) {
+		snprintf(buf,
+			sizeof(buf),
+			"moxa/moxa-%04x.fw",
+			le16_to_cpu(dev->descriptor.idProduct));
+
+		status = request_firmware(&fw_p, buf, &dev->dev);
+		goto check_firmware;
+	}
+
+	/* try ID specific firmware first, then try generic firmware */
+	sprintf(buf, "ti_usb-v%04x-p%04x.fw",
+			le16_to_cpu(dev->descriptor.idVendor),
+			le16_to_cpu(dev->descriptor.idProduct));
+	status = request_firmware(&fw_p, buf, &dev->dev);
+
+	if (status != 0) {
+		buf[0] = '\0';
+		if (le16_to_cpu(dev->descriptor.idVendor) == MTS_VENDOR_ID) {
+			switch (le16_to_cpu(dev->descriptor.idProduct)) {
+			case MTS_CDMA_PRODUCT_ID:
+				strcpy(buf, "mts_cdma.fw");
+				break;
+			case MTS_GSM_PRODUCT_ID:
+				strcpy(buf, "mts_gsm.fw");
+				break;
+			case MTS_EDGE_PRODUCT_ID:
+				strcpy(buf, "mts_edge.fw");
+				break;
+			case MTS_MT9234MU_PRODUCT_ID:
+				strcpy(buf, "mts_mt9234mu.fw");
+				break;
+			case MTS_MT9234ZBA_PRODUCT_ID:
+				strcpy(buf, "mts_mt9234zba.fw");
+				break;
+			case MTS_MT9234ZBAOLD_PRODUCT_ID:
+				strcpy(buf, "mts_mt9234zba.fw");
+				break;			}
+		}
+		if (buf[0] == '\0') {
+			if (tdev->td_is_3410)
+				strcpy(buf, "ti_3410.fw");
+			else
+				strcpy(buf, "ti_5052.fw");
+		}
+		status = request_firmware(&fw_p, buf, &dev->dev);
+	}
+
+check_firmware:
+	if (status) {
+		dev_err(&dev->dev, "%s - firmware not found\n", __func__);
+		return -ENOENT;
+	}
+	if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
+		dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size);
+		release_firmware(fw_p);
+		return -ENOENT;
+	}
+
+	buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
+	buffer = kmalloc(buffer_size, GFP_KERNEL);
+	if (buffer) {
+		memcpy(buffer, fw_p->data, fw_p->size);
+		memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
+		status = ti_do_download(dev, pipe, buffer, fw_p->size);
+		kfree(buffer);
+	} else {
+		status = -ENOMEM;
+	}
+	release_firmware(fw_p);
+	if (status) {
+		dev_err(&dev->dev, "%s - error downloading firmware, %d\n",
+							__func__, status);
+		return status;
+	}
+
+	dev_dbg(&dev->dev, "%s - download successful\n", __func__);
+
+	return 0;
+}
diff --git a/drivers/usb/serial/upd78f0730.c b/drivers/usb/serial/upd78f0730.c
new file mode 100644
index 000000000..c47439bd9
--- /dev/null
+++ b/drivers/usb/serial/upd78f0730.c
@@ -0,0 +1,432 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas Electronics uPD78F0730 USB to serial converter driver
+ *
+ * Copyright (C) 2014,2016 Maksim Salau <maksim.salau@gmail.com>
+ *
+ * Protocol of the adaptor is described in the application note U19660EJ1V0AN00
+ * μPD78F0730 8-bit Single-Chip Microcontroller
+ * USB-to-Serial Conversion Software
+ * <https://www.renesas.com/en-eu/doc/DocumentServer/026/U19660EJ1V0AN00.pdf>
+ *
+ * The adaptor functionality is limited to the following:
+ * - data bits: 7 or 8
+ * - stop bits: 1 or 2
+ * - parity: even, odd or none
+ * - flow control: none
+ * - baud rates: 0, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 153600
+ * - signals: DTR, RTS and BREAK
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define DRIVER_DESC "Renesas uPD78F0730 USB to serial converter driver"
+
+#define DRIVER_AUTHOR "Maksim Salau <maksim.salau@gmail.com>"
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x0409, 0x0063) }, /* V850ESJX3-STICK */
+	{ USB_DEVICE(0x045B, 0x0212) }, /* YRPBRL78G13, YRPBRL78G14 */
+	{ USB_DEVICE(0x064B, 0x7825) }, /* Analog Devices EVAL-ADXL362Z-DB */
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/*
+ * Each adaptor is associated with a private structure, that holds the current
+ * state of control signals (DTR, RTS and BREAK).
+ */
+struct upd78f0730_port_private {
+	struct mutex	lock;		/* mutex to protect line_signals */
+	u8		line_signals;
+};
+
+/* Op-codes of control commands */
+#define UPD78F0730_CMD_LINE_CONTROL	0x00
+#define UPD78F0730_CMD_SET_DTR_RTS	0x01
+#define UPD78F0730_CMD_SET_XON_XOFF_CHR	0x02
+#define UPD78F0730_CMD_OPEN_CLOSE	0x03
+#define UPD78F0730_CMD_SET_ERR_CHR	0x04
+
+/* Data sizes in UPD78F0730_CMD_LINE_CONTROL command */
+#define UPD78F0730_DATA_SIZE_7_BITS	0x00
+#define UPD78F0730_DATA_SIZE_8_BITS	0x01
+#define UPD78F0730_DATA_SIZE_MASK	0x01
+
+/* Stop-bit modes in UPD78F0730_CMD_LINE_CONTROL command */
+#define UPD78F0730_STOP_BIT_1_BIT	0x00
+#define UPD78F0730_STOP_BIT_2_BIT	0x02
+#define UPD78F0730_STOP_BIT_MASK	0x02
+
+/* Parity modes in UPD78F0730_CMD_LINE_CONTROL command */
+#define UPD78F0730_PARITY_NONE	0x00
+#define UPD78F0730_PARITY_EVEN	0x04
+#define UPD78F0730_PARITY_ODD	0x08
+#define UPD78F0730_PARITY_MASK	0x0C
+
+/* Flow control modes in UPD78F0730_CMD_LINE_CONTROL command */
+#define UPD78F0730_FLOW_CONTROL_NONE	0x00
+#define UPD78F0730_FLOW_CONTROL_HW	0x10
+#define UPD78F0730_FLOW_CONTROL_SW	0x20
+#define UPD78F0730_FLOW_CONTROL_MASK	0x30
+
+/* Control signal bits in UPD78F0730_CMD_SET_DTR_RTS command */
+#define UPD78F0730_RTS		0x01
+#define UPD78F0730_DTR		0x02
+#define UPD78F0730_BREAK	0x04
+
+/* Port modes in UPD78F0730_CMD_OPEN_CLOSE command */
+#define UPD78F0730_PORT_CLOSE	0x00
+#define UPD78F0730_PORT_OPEN	0x01
+
+/* Error character substitution modes in UPD78F0730_CMD_SET_ERR_CHR command */
+#define UPD78F0730_ERR_CHR_DISABLED	0x00
+#define UPD78F0730_ERR_CHR_ENABLED	0x01
+
+/*
+ * Declaration of command structures
+ */
+
+/* UPD78F0730_CMD_LINE_CONTROL command */
+struct upd78f0730_line_control {
+	u8	opcode;
+	__le32	baud_rate;
+	u8	params;
+} __packed;
+
+/* UPD78F0730_CMD_SET_DTR_RTS command */
+struct upd78f0730_set_dtr_rts {
+	u8 opcode;
+	u8 params;
+};
+
+/* UPD78F0730_CMD_SET_XON_OFF_CHR command */
+struct upd78f0730_set_xon_xoff_chr {
+	u8 opcode;
+	u8 xon;
+	u8 xoff;
+};
+
+/* UPD78F0730_CMD_OPEN_CLOSE command */
+struct upd78f0730_open_close {
+	u8 opcode;
+	u8 state;
+};
+
+/* UPD78F0730_CMD_SET_ERR_CHR command */
+struct upd78f0730_set_err_chr {
+	u8 opcode;
+	u8 state;
+	u8 err_char;
+};
+
+static int upd78f0730_send_ctl(struct usb_serial_port *port,
+			const void *data, int size)
+{
+	struct usb_device *usbdev = port->serial->dev;
+	void *buf;
+	int res;
+
+	if (size <= 0 || !data)
+		return -EINVAL;
+
+	buf = kmemdup(data, size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	res = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x00,
+			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+			0x0000, 0x0000, buf, size, USB_CTRL_SET_TIMEOUT);
+
+	kfree(buf);
+
+	if (res < 0) {
+		struct device *dev = &port->dev;
+
+		dev_err(dev, "failed to send control request %02x: %d\n",
+			*(u8 *)data, res);
+
+		return res;
+	}
+
+	return 0;
+}
+
+static int upd78f0730_port_probe(struct usb_serial_port *port)
+{
+	struct upd78f0730_port_private *private;
+
+	private = kzalloc(sizeof(*private), GFP_KERNEL);
+	if (!private)
+		return -ENOMEM;
+
+	mutex_init(&private->lock);
+	usb_set_serial_port_data(port, private);
+
+	return 0;
+}
+
+static void upd78f0730_port_remove(struct usb_serial_port *port)
+{
+	struct upd78f0730_port_private *private;
+
+	private = usb_get_serial_port_data(port);
+	mutex_destroy(&private->lock);
+	kfree(private);
+}
+
+static int upd78f0730_tiocmget(struct tty_struct *tty)
+{
+	struct upd78f0730_port_private *private;
+	struct usb_serial_port *port = tty->driver_data;
+	int signals;
+	int res;
+
+	private = usb_get_serial_port_data(port);
+
+	mutex_lock(&private->lock);
+	signals = private->line_signals;
+	mutex_unlock(&private->lock);
+
+	res = ((signals & UPD78F0730_DTR) ? TIOCM_DTR : 0) |
+		((signals & UPD78F0730_RTS) ? TIOCM_RTS : 0);
+
+	dev_dbg(&port->dev, "%s - res = %x\n", __func__, res);
+
+	return res;
+}
+
+static int upd78f0730_tiocmset(struct tty_struct *tty,
+			unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct upd78f0730_port_private *private;
+	struct upd78f0730_set_dtr_rts request;
+	struct device *dev = &port->dev;
+	int res;
+
+	private = usb_get_serial_port_data(port);
+
+	mutex_lock(&private->lock);
+	if (set & TIOCM_DTR) {
+		private->line_signals |= UPD78F0730_DTR;
+		dev_dbg(dev, "%s - set DTR\n", __func__);
+	}
+	if (set & TIOCM_RTS) {
+		private->line_signals |= UPD78F0730_RTS;
+		dev_dbg(dev, "%s - set RTS\n", __func__);
+	}
+	if (clear & TIOCM_DTR) {
+		private->line_signals &= ~UPD78F0730_DTR;
+		dev_dbg(dev, "%s - clear DTR\n", __func__);
+	}
+	if (clear & TIOCM_RTS) {
+		private->line_signals &= ~UPD78F0730_RTS;
+		dev_dbg(dev, "%s - clear RTS\n", __func__);
+	}
+	request.opcode = UPD78F0730_CMD_SET_DTR_RTS;
+	request.params = private->line_signals;
+
+	res = upd78f0730_send_ctl(port, &request, sizeof(request));
+	mutex_unlock(&private->lock);
+
+	return res;
+}
+
+static void upd78f0730_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct upd78f0730_port_private *private;
+	struct usb_serial_port *port = tty->driver_data;
+	struct upd78f0730_set_dtr_rts request;
+	struct device *dev = &port->dev;
+
+	private = usb_get_serial_port_data(port);
+
+	mutex_lock(&private->lock);
+	if (break_state) {
+		private->line_signals |= UPD78F0730_BREAK;
+		dev_dbg(dev, "%s - set BREAK\n", __func__);
+	} else {
+		private->line_signals &= ~UPD78F0730_BREAK;
+		dev_dbg(dev, "%s - clear BREAK\n", __func__);
+	}
+	request.opcode = UPD78F0730_CMD_SET_DTR_RTS;
+	request.params = private->line_signals;
+
+	upd78f0730_send_ctl(port, &request, sizeof(request));
+	mutex_unlock(&private->lock);
+}
+
+static void upd78f0730_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct tty_struct *tty = port->port.tty;
+	unsigned int set = 0;
+	unsigned int clear = 0;
+
+	if (on)
+		set = TIOCM_DTR | TIOCM_RTS;
+	else
+		clear = TIOCM_DTR | TIOCM_RTS;
+
+	upd78f0730_tiocmset(tty, set, clear);
+}
+
+static speed_t upd78f0730_get_baud_rate(struct tty_struct *tty)
+{
+	const speed_t baud_rate = tty_get_baud_rate(tty);
+	static const speed_t supported[] = {
+		0, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 153600
+	};
+	int i;
+
+	for (i = ARRAY_SIZE(supported) - 1; i >= 0; i--) {
+		if (baud_rate == supported[i])
+			return baud_rate;
+	}
+
+	/* If the baud rate is not supported, switch to the default one */
+	tty_encode_baud_rate(tty, 9600, 9600);
+
+	return tty_get_baud_rate(tty);
+}
+
+static void upd78f0730_set_termios(struct tty_struct *tty,
+				   struct usb_serial_port *port,
+				   const struct ktermios *old_termios)
+{
+	struct device *dev = &port->dev;
+	struct upd78f0730_line_control request;
+	speed_t baud_rate;
+
+	if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
+		return;
+
+	if (C_BAUD(tty) == B0)
+		upd78f0730_dtr_rts(port, 0);
+	else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+		upd78f0730_dtr_rts(port, 1);
+
+	baud_rate = upd78f0730_get_baud_rate(tty);
+	request.opcode = UPD78F0730_CMD_LINE_CONTROL;
+	request.baud_rate = cpu_to_le32(baud_rate);
+	request.params = 0;
+	dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud_rate);
+
+	switch (C_CSIZE(tty)) {
+	case CS7:
+		request.params |= UPD78F0730_DATA_SIZE_7_BITS;
+		dev_dbg(dev, "%s - 7 data bits\n", __func__);
+		break;
+	default:
+		tty->termios.c_cflag &= ~CSIZE;
+		tty->termios.c_cflag |= CS8;
+		dev_warn(dev, "data size is not supported, using 8 bits\n");
+		fallthrough;
+	case CS8:
+		request.params |= UPD78F0730_DATA_SIZE_8_BITS;
+		dev_dbg(dev, "%s - 8 data bits\n", __func__);
+		break;
+	}
+
+	if (C_PARENB(tty)) {
+		if (C_PARODD(tty)) {
+			request.params |= UPD78F0730_PARITY_ODD;
+			dev_dbg(dev, "%s - odd parity\n", __func__);
+		} else {
+			request.params |= UPD78F0730_PARITY_EVEN;
+			dev_dbg(dev, "%s - even parity\n", __func__);
+		}
+
+		if (C_CMSPAR(tty)) {
+			tty->termios.c_cflag &= ~CMSPAR;
+			dev_warn(dev, "MARK/SPACE parity is not supported\n");
+		}
+	} else {
+		request.params |= UPD78F0730_PARITY_NONE;
+		dev_dbg(dev, "%s - no parity\n", __func__);
+	}
+
+	if (C_CSTOPB(tty)) {
+		request.params |= UPD78F0730_STOP_BIT_2_BIT;
+		dev_dbg(dev, "%s - 2 stop bits\n", __func__);
+	} else {
+		request.params |= UPD78F0730_STOP_BIT_1_BIT;
+		dev_dbg(dev, "%s - 1 stop bit\n", __func__);
+	}
+
+	if (C_CRTSCTS(tty)) {
+		tty->termios.c_cflag &= ~CRTSCTS;
+		dev_warn(dev, "RTSCTS flow control is not supported\n");
+	}
+	if (I_IXOFF(tty) || I_IXON(tty)) {
+		tty->termios.c_iflag &= ~(IXOFF | IXON);
+		dev_warn(dev, "XON/XOFF flow control is not supported\n");
+	}
+	request.params |= UPD78F0730_FLOW_CONTROL_NONE;
+	dev_dbg(dev, "%s - no flow control\n", __func__);
+
+	upd78f0730_send_ctl(port, &request, sizeof(request));
+}
+
+static int upd78f0730_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	static const struct upd78f0730_open_close request = {
+		.opcode = UPD78F0730_CMD_OPEN_CLOSE,
+		.state = UPD78F0730_PORT_OPEN
+	};
+	int res;
+
+	res = upd78f0730_send_ctl(port, &request, sizeof(request));
+	if (res)
+		return res;
+
+	if (tty)
+		upd78f0730_set_termios(tty, port, NULL);
+
+	return usb_serial_generic_open(tty, port);
+}
+
+static void upd78f0730_close(struct usb_serial_port *port)
+{
+	static const struct upd78f0730_open_close request = {
+		.opcode = UPD78F0730_CMD_OPEN_CLOSE,
+		.state = UPD78F0730_PORT_CLOSE
+	};
+
+	usb_serial_generic_close(port);
+	upd78f0730_send_ctl(port, &request, sizeof(request));
+}
+
+static struct usb_serial_driver upd78f0730_device = {
+	.driver	 = {
+		.owner	= THIS_MODULE,
+		.name	= "upd78f0730",
+	},
+	.id_table	= id_table,
+	.num_ports	= 1,
+	.port_probe	= upd78f0730_port_probe,
+	.port_remove	= upd78f0730_port_remove,
+	.open		= upd78f0730_open,
+	.close		= upd78f0730_close,
+	.set_termios	= upd78f0730_set_termios,
+	.tiocmget	= upd78f0730_tiocmget,
+	.tiocmset	= upd78f0730_tiocmset,
+	.dtr_rts	= upd78f0730_dtr_rts,
+	.break_ctl	= upd78f0730_break_ctl,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&upd78f0730_device,
+	NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
new file mode 100644
index 000000000..24b8772a3
--- /dev/null
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Serial "Simple" driver
+ *
+ * Copyright (C) 2001-2006,2008,2013 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (C) 2005 Arthur Huillet (ahuillet@users.sf.net)
+ * Copyright (C) 2005 Thomas Hergenhahn <thomas.hergenhahn@suse.de>
+ * Copyright (C) 2009 Outpost Embedded, LLC
+ * Copyright (C) 2010 Zilogic Systems <code@zilogic.com>
+ * Copyright (C) 2013 Wei Shuai <cpuwolf@gmail.com>
+ * Copyright (C) 2013 Linux Foundation
+ */
+
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define DEVICE_N(vendor, IDS, nport)				\
+static const struct usb_device_id vendor##_id_table[] = {	\
+	IDS(),							\
+	{ },							\
+};								\
+static struct usb_serial_driver vendor##_device = {		\
+	.driver = {						\
+		.owner =	THIS_MODULE,			\
+		.name =		#vendor,			\
+	},							\
+	.id_table =		vendor##_id_table,		\
+	.num_ports =		nport,				\
+};
+
+#define DEVICE(vendor, IDS)	DEVICE_N(vendor, IDS, 1)
+
+/* Medtronic CareLink USB driver */
+#define CARELINK_IDS()			\
+	{ USB_DEVICE(0x0a21, 0x8001) }	/* MMT-7305WW */
+DEVICE(carelink, CARELINK_IDS);
+
+/* Infineon Flashloader driver */
+#define FLASHLOADER_IDS()		\
+	{ USB_DEVICE_INTERFACE_CLASS(0x058b, 0x0041, USB_CLASS_CDC_DATA) }, \
+	{ USB_DEVICE(0x8087, 0x0716) }, \
+	{ USB_DEVICE(0x8087, 0x0801) }
+DEVICE(flashloader, FLASHLOADER_IDS);
+
+/* Funsoft Serial USB driver */
+#define FUNSOFT_IDS()			\
+	{ USB_DEVICE(0x1404, 0xcddc) }
+DEVICE(funsoft, FUNSOFT_IDS);
+
+/* Google Serial USB SubClass */
+#define GOOGLE_IDS()						\
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x18d1,			\
+					USB_CLASS_VENDOR_SPEC,	\
+					0x50,			\
+					0x01) }
+DEVICE(google, GOOGLE_IDS);
+
+/* HP4x (48/49) Generic Serial driver */
+#define HP4X_IDS()			\
+	{ USB_DEVICE(0x03f0, 0x0121) }
+DEVICE(hp4x, HP4X_IDS);
+
+/* KAUFMANN RKS+CAN VCP */
+#define KAUFMANN_IDS()			\
+	{ USB_DEVICE(0x16d0, 0x0870) }
+DEVICE(kaufmann, KAUFMANN_IDS);
+
+/* Libtransistor USB console */
+#define LIBTRANSISTOR_IDS()			\
+	{ USB_DEVICE(0x1209, 0x8b00) }
+DEVICE(libtransistor, LIBTRANSISTOR_IDS);
+
+/* Motorola USB Phone driver */
+#define MOTO_IDS()			\
+	{ USB_DEVICE(0x05c6, 0x3197) },	/* unknown Motorola phone */	\
+	{ USB_DEVICE(0x0c44, 0x0022) },	/* unknown Motorola phone */	\
+	{ USB_DEVICE(0x22b8, 0x2a64) },	/* Motorola KRZR K1m */		\
+	{ USB_DEVICE(0x22b8, 0x2c84) },	/* Motorola VE240 phone */	\
+	{ USB_DEVICE(0x22b8, 0x2c64) }	/* Motorola V950 phone */
+DEVICE(moto_modem, MOTO_IDS);
+
+/* Motorola Tetra driver */
+#define MOTOROLA_TETRA_IDS()			\
+	{ USB_DEVICE(0x0cad, 0x9011) },	/* Motorola Solutions TETRA PEI */ \
+	{ USB_DEVICE(0x0cad, 0x9012) },	/* MTP6550 */ \
+	{ USB_DEVICE(0x0cad, 0x9013) },	/* MTP3xxx */ \
+	{ USB_DEVICE(0x0cad, 0x9015) },	/* MTP85xx */ \
+	{ USB_DEVICE(0x0cad, 0x9016) }	/* TPG2200 */
+DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS);
+
+/* Nokia mobile phone driver */
+#define NOKIA_IDS()			\
+	{ USB_DEVICE(0x0421, 0x069a) }	/* Nokia 130 (RM-1035) */
+DEVICE(nokia, NOKIA_IDS);
+
+/* Novatel Wireless GPS driver */
+#define NOVATEL_IDS()			\
+	{ USB_DEVICE(0x09d7, 0x0100) }	/* NovAtel FlexPack GPS */
+DEVICE_N(novatel_gps, NOVATEL_IDS, 3);
+
+/* Siemens USB/MPI adapter */
+#define SIEMENS_IDS()			\
+	{ USB_DEVICE(0x908, 0x0004) }
+DEVICE(siemens_mpi, SIEMENS_IDS);
+
+/* Suunto ANT+ USB Driver */
+#define SUUNTO_IDS()			\
+	{ USB_DEVICE(0x0fcf, 0x1008) },	\
+	{ USB_DEVICE(0x0fcf, 0x1009) } /* Dynastream ANT USB-m Stick */
+DEVICE(suunto, SUUNTO_IDS);
+
+/* ViVOpay USB Serial Driver */
+#define VIVOPAY_IDS()			\
+	{ USB_DEVICE(0x1d5f, 0x1004) }	/* ViVOpay 8800 */
+DEVICE(vivopay, VIVOPAY_IDS);
+
+/* ZIO Motherboard USB driver */
+#define ZIO_IDS()			\
+	{ USB_DEVICE(0x1CBE, 0x0103) }
+DEVICE(zio, ZIO_IDS);
+
+/* All of the above structures mushed into two lists */
+static struct usb_serial_driver * const serial_drivers[] = {
+	&carelink_device,
+	&flashloader_device,
+	&funsoft_device,
+	&google_device,
+	&hp4x_device,
+	&kaufmann_device,
+	&libtransistor_device,
+	&moto_modem_device,
+	&motorola_tetra_device,
+	&nokia_device,
+	&novatel_gps_device,
+	&siemens_mpi_device,
+	&suunto_device,
+	&vivopay_device,
+	&zio_device,
+	NULL
+};
+
+static const struct usb_device_id id_table[] = {
+	CARELINK_IDS(),
+	FLASHLOADER_IDS(),
+	FUNSOFT_IDS(),
+	GOOGLE_IDS(),
+	HP4X_IDS(),
+	KAUFMANN_IDS(),
+	LIBTRANSISTOR_IDS(),
+	MOTO_IDS(),
+	MOTOROLA_TETRA_IDS(),
+	NOKIA_IDS(),
+	NOVATEL_IDS(),
+	SIEMENS_IDS(),
+	SUUNTO_IDS(),
+	VIVOPAY_IDS(),
+	ZIO_IDS(),
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+module_usb_serial_driver(serial_drivers, id_table);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
new file mode 100644
index 000000000..164521ee1
--- /dev/null
+++ b/drivers/usb/serial/usb-serial.c
@@ -0,0 +1,1559 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Serial Converter driver
+ *
+ * Copyright (C) 2009 - 2013 Johan Hovold (jhovold@gmail.com)
+ * Copyright (C) 1999 - 2012 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
+ * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com)
+ *
+ * This driver was originally based on the ACM driver by Armin Fuerst (which was
+ * based on a driver by Brad Keryan)
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/seq_file.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/uaccess.h>
+#include <linux/serial.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/kfifo.h>
+#include <linux/idr.h>
+
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
+#define DRIVER_DESC "USB Serial Driver core"
+
+#define USB_SERIAL_TTY_MAJOR	188
+#define USB_SERIAL_TTY_MINORS	512	/* should be enough for a while */
+
+/* There is no MODULE_DEVICE_TABLE for usbserial.c.  Instead
+   the MODULE_DEVICE_TABLE declarations in each serial driver
+   cause the "hotplug" program to pull in whatever module is necessary
+   via modprobe, and modprobe will load usbserial because the serial
+   drivers depend on it.
+*/
+
+static DEFINE_IDR(serial_minors);
+static DEFINE_MUTEX(table_lock);
+static LIST_HEAD(usb_serial_driver_list);
+
+/*
+ * Look up the serial port structure.  If it is found and it hasn't been
+ * disconnected, return with the parent usb_serial structure's disc_mutex held
+ * and its refcount incremented.  Otherwise return NULL.
+ */
+struct usb_serial_port *usb_serial_port_get_by_minor(unsigned minor)
+{
+	struct usb_serial *serial;
+	struct usb_serial_port *port;
+
+	mutex_lock(&table_lock);
+	port = idr_find(&serial_minors, minor);
+	if (!port)
+		goto exit;
+
+	serial = port->serial;
+	mutex_lock(&serial->disc_mutex);
+	if (serial->disconnected) {
+		mutex_unlock(&serial->disc_mutex);
+		port = NULL;
+	} else {
+		kref_get(&serial->kref);
+	}
+exit:
+	mutex_unlock(&table_lock);
+	return port;
+}
+
+static int allocate_minors(struct usb_serial *serial, int num_ports)
+{
+	struct usb_serial_port *port;
+	unsigned int i, j;
+	int minor;
+
+	dev_dbg(&serial->interface->dev, "%s %d\n", __func__, num_ports);
+
+	mutex_lock(&table_lock);
+	for (i = 0; i < num_ports; ++i) {
+		port = serial->port[i];
+		minor = idr_alloc(&serial_minors, port, 0,
+					USB_SERIAL_TTY_MINORS, GFP_KERNEL);
+		if (minor < 0)
+			goto error;
+		port->minor = minor;
+		port->port_number = i;
+	}
+	serial->minors_reserved = 1;
+	mutex_unlock(&table_lock);
+	return 0;
+error:
+	/* unwind the already allocated minors */
+	for (j = 0; j < i; ++j)
+		idr_remove(&serial_minors, serial->port[j]->minor);
+	mutex_unlock(&table_lock);
+	return minor;
+}
+
+static void release_minors(struct usb_serial *serial)
+{
+	int i;
+
+	mutex_lock(&table_lock);
+	for (i = 0; i < serial->num_ports; ++i)
+		idr_remove(&serial_minors, serial->port[i]->minor);
+	mutex_unlock(&table_lock);
+	serial->minors_reserved = 0;
+}
+
+int usb_serial_claim_interface(struct usb_serial *serial, struct usb_interface *intf)
+{
+	struct usb_driver *driver = serial->type->usb_driver;
+	int ret;
+
+	if (serial->sibling)
+		return -EBUSY;
+
+	ret = usb_driver_claim_interface(driver, intf, serial);
+	if (ret) {
+		dev_err(&serial->interface->dev,
+				"failed to claim sibling interface: %d\n", ret);
+		return ret;
+	}
+
+	serial->sibling = intf;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_serial_claim_interface);
+
+static void release_sibling(struct usb_serial *serial, struct usb_interface *intf)
+{
+	struct usb_driver *driver = serial->type->usb_driver;
+	struct usb_interface *sibling;
+
+	if (!serial->sibling)
+		return;
+
+	if (intf == serial->sibling)
+		sibling = serial->interface;
+	else
+		sibling = serial->sibling;
+
+	usb_set_intfdata(sibling, NULL);
+	usb_driver_release_interface(driver, sibling);
+}
+
+static void destroy_serial(struct kref *kref)
+{
+	struct usb_serial *serial;
+	struct usb_serial_port *port;
+	int i;
+
+	serial = to_usb_serial(kref);
+
+	/* return the minor range that this device had */
+	if (serial->minors_reserved)
+		release_minors(serial);
+
+	if (serial->attached && serial->type->release)
+		serial->type->release(serial);
+
+	/* Now that nothing is using the ports, they can be freed */
+	for (i = 0; i < serial->num_port_pointers; ++i) {
+		port = serial->port[i];
+		if (port) {
+			port->serial = NULL;
+			put_device(&port->dev);
+		}
+	}
+
+	usb_put_intf(serial->interface);
+	usb_put_dev(serial->dev);
+	kfree(serial);
+}
+
+void usb_serial_put(struct usb_serial *serial)
+{
+	kref_put(&serial->kref, destroy_serial);
+}
+
+/*****************************************************************************
+ * Driver tty interface functions
+ *****************************************************************************/
+
+/**
+ * serial_install - install tty
+ * @driver: the driver (USB in our case)
+ * @tty: the tty being created
+ *
+ * Initialise the termios structure for this tty.  We use the default
+ * USB serial settings but permit them to be overridden by
+ * serial->type->init_termios on first open.
+ *
+ * This is the first place a new tty gets used.  Hence this is where we
+ * acquire references to the usb_serial structure and the driver module,
+ * where we store a pointer to the port.  All these actions are reversed
+ * in serial_cleanup().
+ */
+static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+	int idx = tty->index;
+	struct usb_serial *serial;
+	struct usb_serial_port *port;
+	bool init_termios;
+	int retval = -ENODEV;
+
+	port = usb_serial_port_get_by_minor(idx);
+	if (!port)
+		return retval;
+
+	serial = port->serial;
+	if (!try_module_get(serial->type->driver.owner))
+		goto err_put_serial;
+
+	init_termios = (driver->termios[idx] == NULL);
+
+	retval = tty_standard_install(driver, tty);
+	if (retval)
+		goto err_put_module;
+
+	mutex_unlock(&serial->disc_mutex);
+
+	/* allow the driver to update the initial settings */
+	if (init_termios && serial->type->init_termios)
+		serial->type->init_termios(tty);
+
+	tty->driver_data = port;
+
+	return retval;
+
+err_put_module:
+	module_put(serial->type->driver.owner);
+err_put_serial:
+	usb_serial_put(serial);
+	mutex_unlock(&serial->disc_mutex);
+	return retval;
+}
+
+static int serial_port_activate(struct tty_port *tport, struct tty_struct *tty)
+{
+	struct usb_serial_port *port =
+		container_of(tport, struct usb_serial_port, port);
+	struct usb_serial *serial = port->serial;
+	int retval;
+
+	mutex_lock(&serial->disc_mutex);
+	if (serial->disconnected) {
+		retval = -ENODEV;
+		goto out_unlock;
+	}
+
+	retval = usb_autopm_get_interface(serial->interface);
+	if (retval)
+		goto out_unlock;
+
+	retval = port->serial->type->open(tty, port);
+	if (retval)
+		usb_autopm_put_interface(serial->interface);
+out_unlock:
+	mutex_unlock(&serial->disc_mutex);
+
+	if (retval < 0)
+		retval = usb_translate_errors(retval);
+
+	return retval;
+}
+
+static int serial_open(struct tty_struct *tty, struct file *filp)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	return tty_port_open(&port->port, tty, filp);
+}
+
+/**
+ * serial_port_shutdown - shut down hardware
+ * @tport: tty port to shut down
+ *
+ * Shut down a USB serial port. Serialized against activate by the
+ * tport mutex and kept to matching open/close pairs
+ * of calls by the tty-port initialized flag.
+ *
+ * Not called if tty is console.
+ */
+static void serial_port_shutdown(struct tty_port *tport)
+{
+	struct usb_serial_port *port =
+		container_of(tport, struct usb_serial_port, port);
+	struct usb_serial_driver *drv = port->serial->type;
+
+	if (drv->close)
+		drv->close(port);
+
+	usb_autopm_put_interface(port->serial->interface);
+}
+
+static void serial_hangup(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	tty_port_hangup(&port->port);
+}
+
+static void serial_close(struct tty_struct *tty, struct file *filp)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	tty_port_close(&port->port, tty, filp);
+}
+
+/**
+ * serial_cleanup - free resources post close/hangup
+ * @tty: tty to clean up
+ *
+ * Do the resource freeing and refcount dropping for the port.
+ * Avoid freeing the console.
+ *
+ * Called asynchronously after the last tty kref is dropped.
+ */
+static void serial_cleanup(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial;
+	struct module *owner;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	/* The console is magical.  Do not hang up the console hardware
+	 * or there will be tears.
+	 */
+	if (port->port.console)
+		return;
+
+	tty->driver_data = NULL;
+
+	serial = port->serial;
+	owner = serial->type->driver.owner;
+
+	usb_serial_put(serial);
+	module_put(owner);
+}
+
+static int serial_write(struct tty_struct *tty, const unsigned char *buf,
+								int count)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	int retval = -ENODEV;
+
+	if (port->serial->dev->state == USB_STATE_NOTATTACHED)
+		goto exit;
+
+	dev_dbg(&port->dev, "%s - %d byte(s)\n", __func__, count);
+
+	retval = port->serial->type->write(tty, port, buf, count);
+	if (retval < 0)
+		retval = usb_translate_errors(retval);
+exit:
+	return retval;
+}
+
+static unsigned int serial_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	return port->serial->type->write_room(tty);
+}
+
+static unsigned int serial_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	if (serial->disconnected)
+		return 0;
+
+	return serial->type->chars_in_buffer(tty);
+}
+
+static void serial_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	if (!port->serial->type->wait_until_sent)
+		return;
+
+	mutex_lock(&serial->disc_mutex);
+	if (!serial->disconnected)
+		port->serial->type->wait_until_sent(tty, timeout);
+	mutex_unlock(&serial->disc_mutex);
+}
+
+static void serial_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	if (port->serial->type->throttle)
+		port->serial->type->throttle(tty);
+}
+
+static void serial_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	if (port->serial->type->unthrottle)
+		port->serial->type->unthrottle(tty);
+}
+
+static int serial_get_serial(struct tty_struct *tty, struct serial_struct *ss)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct tty_port *tport = &port->port;
+	unsigned int close_delay, closing_wait;
+
+	mutex_lock(&tport->mutex);
+
+	close_delay = jiffies_to_msecs(tport->close_delay) / 10;
+	closing_wait = tport->closing_wait;
+	if (closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		closing_wait = jiffies_to_msecs(closing_wait) / 10;
+
+	ss->line = port->minor;
+	ss->close_delay = close_delay;
+	ss->closing_wait = closing_wait;
+
+	if (port->serial->type->get_serial)
+		port->serial->type->get_serial(tty, ss);
+
+	mutex_unlock(&tport->mutex);
+
+	return 0;
+}
+
+static int serial_set_serial(struct tty_struct *tty, struct serial_struct *ss)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct tty_port *tport = &port->port;
+	unsigned int close_delay, closing_wait;
+	int ret = 0;
+
+	close_delay = msecs_to_jiffies(ss->close_delay * 10);
+	closing_wait = ss->closing_wait;
+	if (closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		closing_wait = msecs_to_jiffies(closing_wait * 10);
+
+	mutex_lock(&tport->mutex);
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		if (close_delay != tport->close_delay ||
+				closing_wait != tport->closing_wait) {
+			ret = -EPERM;
+			goto out_unlock;
+		}
+	}
+
+	if (port->serial->type->set_serial) {
+		ret = port->serial->type->set_serial(tty, ss);
+		if (ret)
+			goto out_unlock;
+	}
+
+	tport->close_delay = close_delay;
+	tport->closing_wait = closing_wait;
+out_unlock:
+	mutex_unlock(&tport->mutex);
+
+	return ret;
+}
+
+static int serial_ioctl(struct tty_struct *tty,
+					unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	int retval = -ENOIOCTLCMD;
+
+	dev_dbg(&port->dev, "%s - cmd 0x%04x\n", __func__, cmd);
+
+	switch (cmd) {
+	case TIOCMIWAIT:
+		if (port->serial->type->tiocmiwait)
+			retval = port->serial->type->tiocmiwait(tty, arg);
+		break;
+	default:
+		if (port->serial->type->ioctl)
+			retval = port->serial->type->ioctl(tty, cmd, arg);
+	}
+
+	return retval;
+}
+
+static void serial_set_termios(struct tty_struct *tty,
+		               const struct ktermios *old)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	if (port->serial->type->set_termios)
+		port->serial->type->set_termios(tty, port, old);
+	else
+		tty_termios_copy_hw(&tty->termios, old);
+}
+
+static int serial_break(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	if (port->serial->type->break_ctl)
+		port->serial->type->break_ctl(tty, break_state);
+
+	return 0;
+}
+
+static int serial_proc_show(struct seq_file *m, void *v)
+{
+	struct usb_serial *serial;
+	struct usb_serial_port *port;
+	int i;
+	char tmp[40];
+
+	seq_puts(m, "usbserinfo:1.0 driver:2.0\n");
+	for (i = 0; i < USB_SERIAL_TTY_MINORS; ++i) {
+		port = usb_serial_port_get_by_minor(i);
+		if (port == NULL)
+			continue;
+		serial = port->serial;
+
+		seq_printf(m, "%d:", i);
+		if (serial->type->driver.owner)
+			seq_printf(m, " module:%s",
+				module_name(serial->type->driver.owner));
+		seq_printf(m, " name:\"%s\"",
+				serial->type->description);
+		seq_printf(m, " vendor:%04x product:%04x",
+			le16_to_cpu(serial->dev->descriptor.idVendor),
+			le16_to_cpu(serial->dev->descriptor.idProduct));
+		seq_printf(m, " num_ports:%d", serial->num_ports);
+		seq_printf(m, " port:%d", port->port_number);
+		usb_make_path(serial->dev, tmp, sizeof(tmp));
+		seq_printf(m, " path:%s", tmp);
+
+		seq_putc(m, '\n');
+		usb_serial_put(serial);
+		mutex_unlock(&serial->disc_mutex);
+	}
+	return 0;
+}
+
+static int serial_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	if (port->serial->type->tiocmget)
+		return port->serial->type->tiocmget(tty);
+	return -ENOTTY;
+}
+
+static int serial_tiocmset(struct tty_struct *tty,
+			    unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	if (port->serial->type->tiocmset)
+		return port->serial->type->tiocmset(tty, set, clear);
+	return -ENOTTY;
+}
+
+static int serial_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	if (port->serial->type->get_icount)
+		return port->serial->type->get_icount(tty, icount);
+	return -ENOTTY;
+}
+
+/*
+ * We would be calling tty_wakeup here, but unfortunately some line
+ * disciplines have an annoying habit of calling tty->write from
+ * the write wakeup callback (e.g. n_hdlc.c).
+ */
+void usb_serial_port_softint(struct usb_serial_port *port)
+{
+	schedule_work(&port->work);
+}
+EXPORT_SYMBOL_GPL(usb_serial_port_softint);
+
+static void usb_serial_port_work(struct work_struct *work)
+{
+	struct usb_serial_port *port =
+		container_of(work, struct usb_serial_port, work);
+
+	tty_port_tty_wakeup(&port->port);
+}
+
+static void usb_serial_port_poison_urbs(struct usb_serial_port *port)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
+		usb_poison_urb(port->read_urbs[i]);
+	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
+		usb_poison_urb(port->write_urbs[i]);
+
+	usb_poison_urb(port->interrupt_in_urb);
+	usb_poison_urb(port->interrupt_out_urb);
+}
+
+static void usb_serial_port_unpoison_urbs(struct usb_serial_port *port)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
+		usb_unpoison_urb(port->read_urbs[i]);
+	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
+		usb_unpoison_urb(port->write_urbs[i]);
+
+	usb_unpoison_urb(port->interrupt_in_urb);
+	usb_unpoison_urb(port->interrupt_out_urb);
+}
+
+static void usb_serial_port_release(struct device *dev)
+{
+	struct usb_serial_port *port = to_usb_serial_port(dev);
+	int i;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	usb_free_urb(port->interrupt_in_urb);
+	usb_free_urb(port->interrupt_out_urb);
+	for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
+		usb_free_urb(port->read_urbs[i]);
+		kfree(port->bulk_in_buffers[i]);
+	}
+	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
+		usb_free_urb(port->write_urbs[i]);
+		kfree(port->bulk_out_buffers[i]);
+	}
+	kfifo_free(&port->write_fifo);
+	kfree(port->interrupt_in_buffer);
+	kfree(port->interrupt_out_buffer);
+	tty_port_destroy(&port->port);
+	kfree(port);
+}
+
+static struct usb_serial *create_serial(struct usb_device *dev,
+					struct usb_interface *interface,
+					struct usb_serial_driver *driver)
+{
+	struct usb_serial *serial;
+
+	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
+	if (!serial)
+		return NULL;
+	serial->dev = usb_get_dev(dev);
+	serial->type = driver;
+	serial->interface = usb_get_intf(interface);
+	kref_init(&serial->kref);
+	mutex_init(&serial->disc_mutex);
+	serial->minors_reserved = 0;
+
+	return serial;
+}
+
+static const struct usb_device_id *match_dynamic_id(struct usb_interface *intf,
+					    struct usb_serial_driver *drv)
+{
+	struct usb_dynid *dynid;
+
+	spin_lock(&drv->dynids.lock);
+	list_for_each_entry(dynid, &drv->dynids.list, node) {
+		if (usb_match_one_id(intf, &dynid->id)) {
+			spin_unlock(&drv->dynids.lock);
+			return &dynid->id;
+		}
+	}
+	spin_unlock(&drv->dynids.lock);
+	return NULL;
+}
+
+static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv,
+						struct usb_interface *intf)
+{
+	const struct usb_device_id *id;
+
+	id = usb_match_id(intf, drv->id_table);
+	if (id) {
+		dev_dbg(&intf->dev, "static descriptor matches\n");
+		goto exit;
+	}
+	id = match_dynamic_id(intf, drv);
+	if (id)
+		dev_dbg(&intf->dev, "dynamic descriptor matches\n");
+exit:
+	return id;
+}
+
+/* Caller must hold table_lock */
+static struct usb_serial_driver *search_serial_device(
+					struct usb_interface *iface)
+{
+	const struct usb_device_id *id = NULL;
+	struct usb_serial_driver *drv;
+	struct usb_driver *driver = to_usb_driver(iface->dev.driver);
+
+	/* Check if the usb id matches a known device */
+	list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
+		if (drv->usb_driver == driver)
+			id = get_iface_id(drv, iface);
+		if (id)
+			return drv;
+	}
+
+	return NULL;
+}
+
+static int serial_port_carrier_raised(struct tty_port *port)
+{
+	struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
+	struct usb_serial_driver *drv = p->serial->type;
+
+	if (drv->carrier_raised)
+		return drv->carrier_raised(p);
+	/* No carrier control - don't block */
+	return 1;
+}
+
+static void serial_port_dtr_rts(struct tty_port *port, int on)
+{
+	struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
+	struct usb_serial_driver *drv = p->serial->type;
+
+	if (drv->dtr_rts)
+		drv->dtr_rts(p, on);
+}
+
+static ssize_t port_number_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct usb_serial_port *port = to_usb_serial_port(dev);
+
+	return sprintf(buf, "%u\n", port->port_number);
+}
+static DEVICE_ATTR_RO(port_number);
+
+static struct attribute *usb_serial_port_attrs[] = {
+	&dev_attr_port_number.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(usb_serial_port);
+
+static const struct tty_port_operations serial_port_ops = {
+	.carrier_raised		= serial_port_carrier_raised,
+	.dtr_rts		= serial_port_dtr_rts,
+	.activate		= serial_port_activate,
+	.shutdown		= serial_port_shutdown,
+};
+
+static void store_endpoint(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds,
+					struct usb_endpoint_descriptor *epd)
+{
+	struct device *dev = &serial->interface->dev;
+	u8 addr = epd->bEndpointAddress;
+
+	if (usb_endpoint_is_bulk_in(epd)) {
+		if (epds->num_bulk_in == ARRAY_SIZE(epds->bulk_in))
+			return;
+		dev_dbg(dev, "found bulk in endpoint %02x\n", addr);
+		epds->bulk_in[epds->num_bulk_in++] = epd;
+	} else if (usb_endpoint_is_bulk_out(epd)) {
+		if (epds->num_bulk_out == ARRAY_SIZE(epds->bulk_out))
+			return;
+		dev_dbg(dev, "found bulk out endpoint %02x\n", addr);
+		epds->bulk_out[epds->num_bulk_out++] = epd;
+	} else if (usb_endpoint_is_int_in(epd)) {
+		if (epds->num_interrupt_in == ARRAY_SIZE(epds->interrupt_in))
+			return;
+		dev_dbg(dev, "found interrupt in endpoint %02x\n", addr);
+		epds->interrupt_in[epds->num_interrupt_in++] = epd;
+	} else if (usb_endpoint_is_int_out(epd)) {
+		if (epds->num_interrupt_out == ARRAY_SIZE(epds->interrupt_out))
+			return;
+		dev_dbg(dev, "found interrupt out endpoint %02x\n", addr);
+		epds->interrupt_out[epds->num_interrupt_out++] = epd;
+	}
+}
+
+static void find_endpoints(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds,
+					struct usb_interface *intf)
+{
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *epd;
+	unsigned int i;
+
+	iface_desc = intf->cur_altsetting;
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+		epd = &iface_desc->endpoint[i].desc;
+		store_endpoint(serial, epds, epd);
+	}
+}
+
+static int setup_port_bulk_in(struct usb_serial_port *port,
+					struct usb_endpoint_descriptor *epd)
+{
+	struct usb_serial_driver *type = port->serial->type;
+	struct usb_device *udev = port->serial->dev;
+	int buffer_size;
+	int i;
+
+	buffer_size = max_t(int, type->bulk_in_size, usb_endpoint_maxp(epd));
+	port->bulk_in_size = buffer_size;
+	port->bulk_in_endpointAddress = epd->bEndpointAddress;
+
+	for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
+		set_bit(i, &port->read_urbs_free);
+		port->read_urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
+		if (!port->read_urbs[i])
+			return -ENOMEM;
+		port->bulk_in_buffers[i] = kmalloc(buffer_size, GFP_KERNEL);
+		if (!port->bulk_in_buffers[i])
+			return -ENOMEM;
+		usb_fill_bulk_urb(port->read_urbs[i], udev,
+				usb_rcvbulkpipe(udev, epd->bEndpointAddress),
+				port->bulk_in_buffers[i], buffer_size,
+				type->read_bulk_callback, port);
+	}
+
+	port->read_urb = port->read_urbs[0];
+	port->bulk_in_buffer = port->bulk_in_buffers[0];
+
+	return 0;
+}
+
+static int setup_port_bulk_out(struct usb_serial_port *port,
+					struct usb_endpoint_descriptor *epd)
+{
+	struct usb_serial_driver *type = port->serial->type;
+	struct usb_device *udev = port->serial->dev;
+	int buffer_size;
+	int i;
+
+	if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
+		return -ENOMEM;
+	if (type->bulk_out_size)
+		buffer_size = type->bulk_out_size;
+	else
+		buffer_size = usb_endpoint_maxp(epd);
+	port->bulk_out_size = buffer_size;
+	port->bulk_out_endpointAddress = epd->bEndpointAddress;
+
+	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
+		set_bit(i, &port->write_urbs_free);
+		port->write_urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
+		if (!port->write_urbs[i])
+			return -ENOMEM;
+		port->bulk_out_buffers[i] = kmalloc(buffer_size, GFP_KERNEL);
+		if (!port->bulk_out_buffers[i])
+			return -ENOMEM;
+		usb_fill_bulk_urb(port->write_urbs[i], udev,
+				usb_sndbulkpipe(udev, epd->bEndpointAddress),
+				port->bulk_out_buffers[i], buffer_size,
+				type->write_bulk_callback, port);
+	}
+
+	port->write_urb = port->write_urbs[0];
+	port->bulk_out_buffer = port->bulk_out_buffers[0];
+
+	return 0;
+}
+
+static int setup_port_interrupt_in(struct usb_serial_port *port,
+					struct usb_endpoint_descriptor *epd)
+{
+	struct usb_serial_driver *type = port->serial->type;
+	struct usb_device *udev = port->serial->dev;
+	int buffer_size;
+
+	port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!port->interrupt_in_urb)
+		return -ENOMEM;
+	buffer_size = usb_endpoint_maxp(epd);
+	port->interrupt_in_endpointAddress = epd->bEndpointAddress;
+	port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
+	if (!port->interrupt_in_buffer)
+		return -ENOMEM;
+	usb_fill_int_urb(port->interrupt_in_urb, udev,
+			usb_rcvintpipe(udev, epd->bEndpointAddress),
+			port->interrupt_in_buffer, buffer_size,
+			type->read_int_callback, port,
+			epd->bInterval);
+
+	return 0;
+}
+
+static int setup_port_interrupt_out(struct usb_serial_port *port,
+					struct usb_endpoint_descriptor *epd)
+{
+	struct usb_serial_driver *type = port->serial->type;
+	struct usb_device *udev = port->serial->dev;
+	int buffer_size;
+
+	port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!port->interrupt_out_urb)
+		return -ENOMEM;
+	buffer_size = usb_endpoint_maxp(epd);
+	port->interrupt_out_size = buffer_size;
+	port->interrupt_out_endpointAddress = epd->bEndpointAddress;
+	port->interrupt_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
+	if (!port->interrupt_out_buffer)
+		return -ENOMEM;
+	usb_fill_int_urb(port->interrupt_out_urb, udev,
+			usb_sndintpipe(udev, epd->bEndpointAddress),
+			port->interrupt_out_buffer, buffer_size,
+			type->write_int_callback, port,
+			epd->bInterval);
+
+	return 0;
+}
+
+static int usb_serial_probe(struct usb_interface *interface,
+			       const struct usb_device_id *id)
+{
+	struct device *ddev = &interface->dev;
+	struct usb_device *dev = interface_to_usbdev(interface);
+	struct usb_serial *serial = NULL;
+	struct usb_serial_port *port;
+	struct usb_serial_endpoints *epds;
+	struct usb_serial_driver *type = NULL;
+	int retval;
+	int i;
+	int num_ports = 0;
+	unsigned char max_endpoints;
+
+	mutex_lock(&table_lock);
+	type = search_serial_device(interface);
+	if (!type) {
+		mutex_unlock(&table_lock);
+		dev_dbg(ddev, "none matched\n");
+		return -ENODEV;
+	}
+
+	if (!try_module_get(type->driver.owner)) {
+		mutex_unlock(&table_lock);
+		dev_err(ddev, "module get failed, exiting\n");
+		return -EIO;
+	}
+	mutex_unlock(&table_lock);
+
+	serial = create_serial(dev, interface, type);
+	if (!serial) {
+		retval = -ENOMEM;
+		goto err_put_module;
+	}
+
+	/* if this device type has a probe function, call it */
+	if (type->probe) {
+		const struct usb_device_id *id;
+
+		id = get_iface_id(type, interface);
+		retval = type->probe(serial, id);
+
+		if (retval) {
+			dev_dbg(ddev, "sub driver rejected device\n");
+			goto err_release_sibling;
+		}
+	}
+
+	/* descriptor matches, let's find the endpoints needed */
+	epds = kzalloc(sizeof(*epds), GFP_KERNEL);
+	if (!epds) {
+		retval = -ENOMEM;
+		goto err_release_sibling;
+	}
+
+	find_endpoints(serial, epds, interface);
+	if (serial->sibling)
+		find_endpoints(serial, epds, serial->sibling);
+
+	if (epds->num_bulk_in < type->num_bulk_in ||
+			epds->num_bulk_out < type->num_bulk_out ||
+			epds->num_interrupt_in < type->num_interrupt_in ||
+			epds->num_interrupt_out < type->num_interrupt_out) {
+		dev_err(ddev, "required endpoints missing\n");
+		retval = -ENODEV;
+		goto err_free_epds;
+	}
+
+	if (type->calc_num_ports) {
+		retval = type->calc_num_ports(serial, epds);
+		if (retval < 0)
+			goto err_free_epds;
+		num_ports = retval;
+	}
+
+	if (!num_ports)
+		num_ports = type->num_ports;
+
+	if (num_ports > MAX_NUM_PORTS) {
+		dev_warn(ddev, "too many ports requested: %d\n", num_ports);
+		num_ports = MAX_NUM_PORTS;
+	}
+
+	serial->num_ports = (unsigned char)num_ports;
+	serial->num_bulk_in = epds->num_bulk_in;
+	serial->num_bulk_out = epds->num_bulk_out;
+	serial->num_interrupt_in = epds->num_interrupt_in;
+	serial->num_interrupt_out = epds->num_interrupt_out;
+
+	/* found all that we need */
+	dev_info(ddev, "%s converter detected\n", type->description);
+
+	/* create our ports, we need as many as the max endpoints */
+	/* we don't use num_ports here because some devices have more
+	   endpoint pairs than ports */
+	max_endpoints = max(epds->num_bulk_in, epds->num_bulk_out);
+	max_endpoints = max(max_endpoints, epds->num_interrupt_in);
+	max_endpoints = max(max_endpoints, epds->num_interrupt_out);
+	max_endpoints = max(max_endpoints, serial->num_ports);
+	serial->num_port_pointers = max_endpoints;
+
+	dev_dbg(ddev, "setting up %d port structure(s)\n", max_endpoints);
+	for (i = 0; i < max_endpoints; ++i) {
+		port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
+		if (!port) {
+			retval = -ENOMEM;
+			goto err_free_epds;
+		}
+		tty_port_init(&port->port);
+		port->port.ops = &serial_port_ops;
+		port->serial = serial;
+		spin_lock_init(&port->lock);
+		/* Keep this for private driver use for the moment but
+		   should probably go away */
+		INIT_WORK(&port->work, usb_serial_port_work);
+		serial->port[i] = port;
+		port->dev.parent = &interface->dev;
+		port->dev.driver = NULL;
+		port->dev.bus = &usb_serial_bus_type;
+		port->dev.release = &usb_serial_port_release;
+		port->dev.groups = usb_serial_port_groups;
+		device_initialize(&port->dev);
+	}
+
+	/* set up the endpoint information */
+	for (i = 0; i < epds->num_bulk_in; ++i) {
+		retval = setup_port_bulk_in(serial->port[i], epds->bulk_in[i]);
+		if (retval)
+			goto err_free_epds;
+	}
+
+	for (i = 0; i < epds->num_bulk_out; ++i) {
+		retval = setup_port_bulk_out(serial->port[i],
+				epds->bulk_out[i]);
+		if (retval)
+			goto err_free_epds;
+	}
+
+	if (serial->type->read_int_callback) {
+		for (i = 0; i < epds->num_interrupt_in; ++i) {
+			retval = setup_port_interrupt_in(serial->port[i],
+					epds->interrupt_in[i]);
+			if (retval)
+				goto err_free_epds;
+		}
+	} else if (epds->num_interrupt_in) {
+		dev_dbg(ddev, "The device claims to support interrupt in transfers, but read_int_callback is not defined\n");
+	}
+
+	if (serial->type->write_int_callback) {
+		for (i = 0; i < epds->num_interrupt_out; ++i) {
+			retval = setup_port_interrupt_out(serial->port[i],
+					epds->interrupt_out[i]);
+			if (retval)
+				goto err_free_epds;
+		}
+	} else if (epds->num_interrupt_out) {
+		dev_dbg(ddev, "The device claims to support interrupt out transfers, but write_int_callback is not defined\n");
+	}
+
+	usb_set_intfdata(interface, serial);
+
+	/* if this device type has an attach function, call it */
+	if (type->attach) {
+		retval = type->attach(serial);
+		if (retval < 0)
+			goto err_free_epds;
+		serial->attached = 1;
+		if (retval > 0) {
+			/* quietly accept this device, but don't bind to a
+			   serial port as it's about to disappear */
+			serial->num_ports = 0;
+			goto exit;
+		}
+	} else {
+		serial->attached = 1;
+	}
+
+	retval = allocate_minors(serial, num_ports);
+	if (retval) {
+		dev_err(ddev, "No more free serial minor numbers\n");
+		goto err_free_epds;
+	}
+
+	/* register all of the individual ports with the driver core */
+	for (i = 0; i < num_ports; ++i) {
+		port = serial->port[i];
+		dev_set_name(&port->dev, "ttyUSB%d", port->minor);
+		dev_dbg(ddev, "registering %s\n", dev_name(&port->dev));
+		device_enable_async_suspend(&port->dev);
+
+		retval = device_add(&port->dev);
+		if (retval)
+			dev_err(ddev, "Error registering port device, continuing\n");
+	}
+
+	if (num_ports > 0)
+		usb_serial_console_init(serial->port[0]->minor);
+exit:
+	kfree(epds);
+	module_put(type->driver.owner);
+	return 0;
+
+err_free_epds:
+	kfree(epds);
+err_release_sibling:
+	release_sibling(serial, interface);
+	usb_serial_put(serial);
+err_put_module:
+	module_put(type->driver.owner);
+
+	return retval;
+}
+
+static void usb_serial_disconnect(struct usb_interface *interface)
+{
+	int i;
+	struct usb_serial *serial = usb_get_intfdata(interface);
+	struct device *dev = &interface->dev;
+	struct usb_serial_port *port;
+	struct tty_struct *tty;
+
+	/* sibling interface is cleaning up */
+	if (!serial)
+		return;
+
+	usb_serial_console_disconnect(serial);
+
+	mutex_lock(&serial->disc_mutex);
+	/* must set a flag, to signal subdrivers */
+	serial->disconnected = 1;
+	mutex_unlock(&serial->disc_mutex);
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		tty = tty_port_tty_get(&port->port);
+		if (tty) {
+			tty_vhangup(tty);
+			tty_kref_put(tty);
+		}
+		usb_serial_port_poison_urbs(port);
+		wake_up_interruptible(&port->port.delta_msr_wait);
+		cancel_work_sync(&port->work);
+		if (device_is_registered(&port->dev))
+			device_del(&port->dev);
+	}
+	if (serial->type->disconnect)
+		serial->type->disconnect(serial);
+
+	release_sibling(serial, interface);
+
+	/* let the last holder of this object cause it to be cleaned up */
+	usb_serial_put(serial);
+	dev_info(dev, "device disconnected\n");
+}
+
+int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usb_serial *serial = usb_get_intfdata(intf);
+	int i, r;
+
+	/* suspend when called for first sibling interface */
+	if (serial->suspend_count++)
+		return 0;
+
+	/*
+	 * serial->type->suspend() MUST return 0 in system sleep context,
+	 * otherwise, the resume callback has to recover device from
+	 * previous suspend failure.
+	 */
+	if (serial->type->suspend) {
+		r = serial->type->suspend(serial, message);
+		if (r < 0) {
+			serial->suspend_count--;
+			return r;
+		}
+	}
+
+	for (i = 0; i < serial->num_ports; ++i)
+		usb_serial_port_poison_urbs(serial->port[i]);
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_serial_suspend);
+
+static void usb_serial_unpoison_port_urbs(struct usb_serial *serial)
+{
+	int i;
+
+	for (i = 0; i < serial->num_ports; ++i)
+		usb_serial_port_unpoison_urbs(serial->port[i]);
+}
+
+int usb_serial_resume(struct usb_interface *intf)
+{
+	struct usb_serial *serial = usb_get_intfdata(intf);
+	int rv;
+
+	/* resume when called for last sibling interface */
+	if (--serial->suspend_count)
+		return 0;
+
+	usb_serial_unpoison_port_urbs(serial);
+
+	if (serial->type->resume)
+		rv = serial->type->resume(serial);
+	else
+		rv = usb_serial_generic_resume(serial);
+
+	return rv;
+}
+EXPORT_SYMBOL(usb_serial_resume);
+
+static int usb_serial_reset_resume(struct usb_interface *intf)
+{
+	struct usb_serial *serial = usb_get_intfdata(intf);
+	int rv;
+
+	/* resume when called for last sibling interface */
+	if (--serial->suspend_count)
+		return 0;
+
+	usb_serial_unpoison_port_urbs(serial);
+
+	if (serial->type->reset_resume) {
+		rv = serial->type->reset_resume(serial);
+	} else {
+		rv = -EOPNOTSUPP;
+		intf->needs_binding = 1;
+	}
+
+	return rv;
+}
+
+static const struct tty_operations serial_ops = {
+	.open =			serial_open,
+	.close =		serial_close,
+	.write =		serial_write,
+	.hangup =		serial_hangup,
+	.write_room =		serial_write_room,
+	.ioctl =		serial_ioctl,
+	.set_termios =		serial_set_termios,
+	.throttle =		serial_throttle,
+	.unthrottle =		serial_unthrottle,
+	.break_ctl =		serial_break,
+	.chars_in_buffer =	serial_chars_in_buffer,
+	.wait_until_sent =	serial_wait_until_sent,
+	.tiocmget =		serial_tiocmget,
+	.tiocmset =		serial_tiocmset,
+	.get_icount =		serial_get_icount,
+	.set_serial =		serial_set_serial,
+	.get_serial =		serial_get_serial,
+	.cleanup =		serial_cleanup,
+	.install =		serial_install,
+	.proc_show =		serial_proc_show,
+};
+
+
+struct tty_driver *usb_serial_tty_driver;
+
+static int __init usb_serial_init(void)
+{
+	int result;
+
+	usb_serial_tty_driver = tty_alloc_driver(USB_SERIAL_TTY_MINORS,
+			TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(usb_serial_tty_driver))
+		return PTR_ERR(usb_serial_tty_driver);
+
+	/* Initialize our global data */
+	result = bus_register(&usb_serial_bus_type);
+	if (result) {
+		pr_err("%s - registering bus driver failed\n", __func__);
+		goto err_put_driver;
+	}
+
+	usb_serial_tty_driver->driver_name = "usbserial";
+	usb_serial_tty_driver->name = "ttyUSB";
+	usb_serial_tty_driver->major = USB_SERIAL_TTY_MAJOR;
+	usb_serial_tty_driver->minor_start = 0;
+	usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL;
+	usb_serial_tty_driver->init_termios = tty_std_termios;
+	usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD
+							| HUPCL | CLOCAL;
+	usb_serial_tty_driver->init_termios.c_ispeed = 9600;
+	usb_serial_tty_driver->init_termios.c_ospeed = 9600;
+	tty_set_operations(usb_serial_tty_driver, &serial_ops);
+	result = tty_register_driver(usb_serial_tty_driver);
+	if (result) {
+		pr_err("%s - tty_register_driver failed\n", __func__);
+		goto err_unregister_bus;
+	}
+
+	/* register the generic driver, if we should */
+	result = usb_serial_generic_register();
+	if (result < 0) {
+		pr_err("%s - registering generic driver failed\n", __func__);
+		goto err_unregister_driver;
+	}
+
+	return result;
+
+err_unregister_driver:
+	tty_unregister_driver(usb_serial_tty_driver);
+err_unregister_bus:
+	bus_unregister(&usb_serial_bus_type);
+err_put_driver:
+	pr_err("%s - returning with error %d\n", __func__, result);
+	tty_driver_kref_put(usb_serial_tty_driver);
+	return result;
+}
+
+
+static void __exit usb_serial_exit(void)
+{
+	usb_serial_console_exit();
+
+	usb_serial_generic_deregister();
+
+	tty_unregister_driver(usb_serial_tty_driver);
+	tty_driver_kref_put(usb_serial_tty_driver);
+	bus_unregister(&usb_serial_bus_type);
+	idr_destroy(&serial_minors);
+}
+
+
+module_init(usb_serial_init);
+module_exit(usb_serial_exit);
+
+#define set_to_generic_if_null(type, function)				\
+	do {								\
+		if (!type->function) {					\
+			type->function = usb_serial_generic_##function;	\
+			pr_debug("%s: using generic " #function	"\n",	\
+						type->driver.name);	\
+		}							\
+	} while (0)
+
+static void usb_serial_operations_init(struct usb_serial_driver *device)
+{
+	set_to_generic_if_null(device, open);
+	set_to_generic_if_null(device, write);
+	set_to_generic_if_null(device, close);
+	set_to_generic_if_null(device, write_room);
+	set_to_generic_if_null(device, chars_in_buffer);
+	if (device->tx_empty)
+		set_to_generic_if_null(device, wait_until_sent);
+	set_to_generic_if_null(device, read_bulk_callback);
+	set_to_generic_if_null(device, write_bulk_callback);
+	set_to_generic_if_null(device, process_read_urb);
+	set_to_generic_if_null(device, prepare_write_buffer);
+}
+
+static int usb_serial_register(struct usb_serial_driver *driver)
+{
+	int retval;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	if (!driver->description)
+		driver->description = driver->driver.name;
+	if (!driver->usb_driver) {
+		WARN(1, "Serial driver %s has no usb_driver\n",
+				driver->description);
+		return -EINVAL;
+	}
+
+	/* Prevent individual ports from being unbound. */
+	driver->driver.suppress_bind_attrs = true;
+
+	usb_serial_operations_init(driver);
+
+	/* Add this device to our list of devices */
+	mutex_lock(&table_lock);
+	list_add(&driver->driver_list, &usb_serial_driver_list);
+
+	retval = usb_serial_bus_register(driver);
+	if (retval) {
+		pr_err("problem %d when registering driver %s\n", retval, driver->description);
+		list_del(&driver->driver_list);
+	} else {
+		pr_info("USB Serial support registered for %s\n", driver->description);
+	}
+	mutex_unlock(&table_lock);
+	return retval;
+}
+
+static void usb_serial_deregister(struct usb_serial_driver *device)
+{
+	pr_info("USB Serial deregistering driver %s\n", device->description);
+
+	mutex_lock(&table_lock);
+	list_del(&device->driver_list);
+	mutex_unlock(&table_lock);
+
+	usb_serial_bus_deregister(device);
+}
+
+/**
+ * usb_serial_register_drivers - register drivers for a usb-serial module
+ * @serial_drivers: NULL-terminated array of pointers to drivers to be registered
+ * @name: name of the usb_driver for this set of @serial_drivers
+ * @id_table: list of all devices this @serial_drivers set binds to
+ *
+ * Registers all the drivers in the @serial_drivers array, and dynamically
+ * creates a struct usb_driver with the name @name and id_table of @id_table.
+ */
+int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[],
+				const char *name,
+				const struct usb_device_id *id_table)
+{
+	int rc;
+	struct usb_driver *udriver;
+	struct usb_serial_driver * const *sd;
+
+	/*
+	 * udriver must be registered before any of the serial drivers,
+	 * because the store_new_id() routine for the serial drivers (in
+	 * bus.c) probes udriver.
+	 *
+	 * Performance hack: We don't want udriver to be probed until
+	 * the serial drivers are registered, because the probe would
+	 * simply fail for lack of a matching serial driver.
+	 * So we leave udriver's id_table set to NULL until we are all set.
+	 *
+	 * Suspend/resume support is implemented in the usb-serial core,
+	 * so fill in the PM-related fields in udriver.
+	 */
+	udriver = kzalloc(sizeof(*udriver), GFP_KERNEL);
+	if (!udriver)
+		return -ENOMEM;
+
+	udriver->name = name;
+	udriver->no_dynamic_id = 1;
+	udriver->supports_autosuspend = 1;
+	udriver->suspend = usb_serial_suspend;
+	udriver->resume = usb_serial_resume;
+	udriver->probe = usb_serial_probe;
+	udriver->disconnect = usb_serial_disconnect;
+
+	/* we only set the reset_resume field if the serial_driver has one */
+	for (sd = serial_drivers; *sd; ++sd) {
+		if ((*sd)->reset_resume) {
+			udriver->reset_resume = usb_serial_reset_resume;
+			break;
+		}
+	}
+
+	rc = usb_register(udriver);
+	if (rc)
+		goto err_free_driver;
+
+	for (sd = serial_drivers; *sd; ++sd) {
+		(*sd)->usb_driver = udriver;
+		rc = usb_serial_register(*sd);
+		if (rc)
+			goto err_deregister_drivers;
+	}
+
+	/* Now set udriver's id_table and look for matches */
+	udriver->id_table = id_table;
+	rc = driver_attach(&udriver->drvwrap.driver);
+	return 0;
+
+err_deregister_drivers:
+	while (sd-- > serial_drivers)
+		usb_serial_deregister(*sd);
+	usb_deregister(udriver);
+err_free_driver:
+	kfree(udriver);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(usb_serial_register_drivers);
+
+/**
+ * usb_serial_deregister_drivers - deregister drivers for a usb-serial module
+ * @serial_drivers: NULL-terminated array of pointers to drivers to be deregistered
+ *
+ * Deregisters all the drivers in the @serial_drivers array and deregisters and
+ * frees the struct usb_driver that was created by the call to
+ * usb_serial_register_drivers().
+ */
+void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[])
+{
+	struct usb_driver *udriver = (*serial_drivers)->usb_driver;
+
+	for (; *serial_drivers; ++serial_drivers)
+		usb_serial_deregister(*serial_drivers);
+	usb_deregister(udriver);
+	kfree(udriver);
+}
+EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h
new file mode 100644
index 000000000..519101945
--- /dev/null
+++ b/drivers/usb/serial/usb-wwan.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Definitions for USB serial mobile broadband cards
+ */
+
+#ifndef __LINUX_USB_USB_WWAN
+#define __LINUX_USB_USB_WWAN
+
+extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on);
+extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port);
+extern void usb_wwan_close(struct usb_serial_port *port);
+extern int usb_wwan_port_probe(struct usb_serial_port *port);
+extern void usb_wwan_port_remove(struct usb_serial_port *port);
+extern unsigned int usb_wwan_write_room(struct tty_struct *tty);
+extern int usb_wwan_tiocmget(struct tty_struct *tty);
+extern int usb_wwan_tiocmset(struct tty_struct *tty,
+			     unsigned int set, unsigned int clear);
+extern int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
+			  const unsigned char *buf, int count);
+extern unsigned int usb_wwan_chars_in_buffer(struct tty_struct *tty);
+#ifdef CONFIG_PM
+extern int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message);
+extern int usb_wwan_resume(struct usb_serial *serial);
+#endif
+
+/* per port private data */
+
+#define N_IN_URB 4
+#define N_OUT_URB 4
+#define IN_BUFLEN 4096
+#define OUT_BUFLEN 4096
+
+struct usb_wwan_intf_private {
+	spinlock_t susp_lock;
+	unsigned int suspended:1;
+	unsigned int use_send_setup:1;
+	unsigned int use_zlp:1;
+	int in_flight;
+	unsigned int open_ports;
+	void *private;
+};
+
+struct usb_wwan_port_private {
+	/* Input endpoints and buffer for this port */
+	struct urb *in_urbs[N_IN_URB];
+	u8 *in_buffer[N_IN_URB];
+	/* Output endpoints and buffer for this port */
+	struct urb *out_urbs[N_OUT_URB];
+	u8 *out_buffer[N_OUT_URB];
+	unsigned long out_busy;	/* Bit vector of URBs in use */
+	struct usb_anchor delayed;
+
+	/* Settings for the port */
+	int rts_state;		/* Handshaking pins (outputs) */
+	int dtr_state;
+	int cts_state;		/* Handshaking pins (inputs) */
+	int dsr_state;
+	int dcd_state;
+	int ri_state;
+
+	unsigned long tx_start_time[N_OUT_URB];
+};
+
+#endif /* __LINUX_USB_USB_WWAN */
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
new file mode 100644
index 000000000..aaf4813e4
--- /dev/null
+++ b/drivers/usb/serial/usb_debug.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Debug cable driver
+ *
+ * Copyright (C) 2006 Greg Kroah-Hartman <greg@kroah.com>
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define USB_DEBUG_MAX_PACKET_SIZE	8
+#define USB_DEBUG_BRK_SIZE		8
+static const char USB_DEBUG_BRK[USB_DEBUG_BRK_SIZE] = {
+	0x00,
+	0xff,
+	0x01,
+	0xfe,
+	0x00,
+	0xfe,
+	0x01,
+	0xff,
+};
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x0525, 0x127a) },
+	{ },
+};
+
+static const struct usb_device_id dbc_id_table[] = {
+	{ USB_DEVICE(0x1d6b, 0x0010) },
+	{ USB_DEVICE(0x1d6b, 0x0011) },
+	{ },
+};
+
+static const struct usb_device_id id_table_combined[] = {
+	{ USB_DEVICE(0x0525, 0x127a) },
+	{ USB_DEVICE(0x1d6b, 0x0010) },
+	{ USB_DEVICE(0x1d6b, 0x0011) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table_combined);
+
+/* This HW really does not support a serial break, so one will be
+ * emulated when ever the break state is set to true.
+ */
+static void usb_debug_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	if (!break_state)
+		return;
+	usb_serial_generic_write(tty, port, USB_DEBUG_BRK, USB_DEBUG_BRK_SIZE);
+}
+
+static void usb_debug_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+
+	if (urb->actual_length == USB_DEBUG_BRK_SIZE &&
+		memcmp(urb->transfer_buffer, USB_DEBUG_BRK,
+						USB_DEBUG_BRK_SIZE) == 0) {
+		usb_serial_handle_break(port);
+		return;
+	}
+
+	usb_serial_generic_process_read_urb(urb);
+}
+
+static struct usb_serial_driver debug_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"debug",
+	},
+	.id_table =		id_table,
+	.num_ports =		1,
+	.bulk_out_size =	USB_DEBUG_MAX_PACKET_SIZE,
+	.break_ctl =		usb_debug_break_ctl,
+	.process_read_urb =	usb_debug_process_read_urb,
+};
+
+static struct usb_serial_driver dbc_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"xhci_dbc",
+	},
+	.id_table =		dbc_id_table,
+	.num_ports =		1,
+	.break_ctl =		usb_debug_break_ctl,
+	.process_read_urb =	usb_debug_process_read_urb,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&debug_device, &dbc_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table_combined);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
new file mode 100644
index 000000000..0017f6e96
--- /dev/null
+++ b/drivers/usb/serial/usb_wwan.c
@@ -0,0 +1,658 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+  USB Driver layer for GSM modems
+
+  Copyright (C) 2005  Matthias Urlichs <smurf@smurf.noris.de>
+
+  Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
+
+  History: see the git log.
+
+  Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
+
+  This driver exists because the "normal" serial driver doesn't work too well
+  with GSM modems. Issues:
+  - data loss -- one single Receive URB is not nearly enough
+  - controlling the baud rate doesn't make sense
+*/
+
+#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
+#define DRIVER_DESC "USB Driver for GSM modems"
+
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/serial.h>
+#include <linux/serial.h>
+#include "usb-wwan.h"
+
+/*
+ * Generate DTR/RTS signals on the port using the SET_CONTROL_LINE_STATE request
+ * in CDC ACM.
+ */
+static int usb_wwan_send_setup(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct usb_wwan_port_private *portdata;
+	int val = 0;
+	int ifnum;
+	int res;
+
+	portdata = usb_get_serial_port_data(port);
+
+	if (portdata->dtr_state)
+		val |= USB_CDC_CTRL_DTR;
+	if (portdata->rts_state)
+		val |= USB_CDC_CTRL_RTS;
+
+	ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+
+	res = usb_autopm_get_interface(serial->interface);
+	if (res)
+		return res;
+
+	res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+				USB_CDC_REQ_SET_CONTROL_LINE_STATE,
+				USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+				val, ifnum, NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+	usb_autopm_put_interface(port->serial->interface);
+
+	return res;
+}
+
+void usb_wwan_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+
+	intfdata = usb_get_serial_data(port->serial);
+
+	if (!intfdata->use_send_setup)
+		return;
+
+	portdata = usb_get_serial_port_data(port);
+	/* FIXME: locking */
+	portdata->rts_state = on;
+	portdata->dtr_state = on;
+
+	usb_wwan_send_setup(port);
+}
+EXPORT_SYMBOL(usb_wwan_dtr_rts);
+
+int usb_wwan_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned int value;
+	struct usb_wwan_port_private *portdata;
+
+	portdata = usb_get_serial_port_data(port);
+
+	value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
+	    ((portdata->dtr_state) ? TIOCM_DTR : 0) |
+	    ((portdata->cts_state) ? TIOCM_CTS : 0) |
+	    ((portdata->dsr_state) ? TIOCM_DSR : 0) |
+	    ((portdata->dcd_state) ? TIOCM_CAR : 0) |
+	    ((portdata->ri_state) ? TIOCM_RNG : 0);
+
+	return value;
+}
+EXPORT_SYMBOL(usb_wwan_tiocmget);
+
+int usb_wwan_tiocmset(struct tty_struct *tty,
+		      unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+
+	portdata = usb_get_serial_port_data(port);
+	intfdata = usb_get_serial_data(port->serial);
+
+	if (!intfdata->use_send_setup)
+		return -EINVAL;
+
+	/* FIXME: what locks portdata fields ? */
+	if (set & TIOCM_RTS)
+		portdata->rts_state = 1;
+	if (set & TIOCM_DTR)
+		portdata->dtr_state = 1;
+
+	if (clear & TIOCM_RTS)
+		portdata->rts_state = 0;
+	if (clear & TIOCM_DTR)
+		portdata->dtr_state = 0;
+	return usb_wwan_send_setup(port);
+}
+EXPORT_SYMBOL(usb_wwan_tiocmset);
+
+int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
+		   const unsigned char *buf, int count)
+{
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+	int i;
+	int left, todo;
+	struct urb *this_urb = NULL;	/* spurious */
+	int err;
+	unsigned long flags;
+
+	portdata = usb_get_serial_port_data(port);
+	intfdata = usb_get_serial_data(port->serial);
+
+	dev_dbg(&port->dev, "%s: write (%d chars)\n", __func__, count);
+
+	left = count;
+	for (i = 0; left > 0 && i < N_OUT_URB; i++) {
+		todo = left;
+		if (todo > OUT_BUFLEN)
+			todo = OUT_BUFLEN;
+
+		this_urb = portdata->out_urbs[i];
+		if (test_and_set_bit(i, &portdata->out_busy)) {
+			if (time_before(jiffies,
+					portdata->tx_start_time[i] + 10 * HZ))
+				continue;
+			usb_unlink_urb(this_urb);
+			continue;
+		}
+		dev_dbg(&port->dev, "%s: endpoint %d buf %d\n", __func__,
+			usb_pipeendpoint(this_urb->pipe), i);
+
+		err = usb_autopm_get_interface_async(port->serial->interface);
+		if (err < 0) {
+			clear_bit(i, &portdata->out_busy);
+			break;
+		}
+
+		/* send the data */
+		memcpy(this_urb->transfer_buffer, buf, todo);
+		this_urb->transfer_buffer_length = todo;
+
+		spin_lock_irqsave(&intfdata->susp_lock, flags);
+		if (intfdata->suspended) {
+			usb_anchor_urb(this_urb, &portdata->delayed);
+			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+		} else {
+			intfdata->in_flight++;
+			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+			err = usb_submit_urb(this_urb, GFP_ATOMIC);
+			if (err) {
+				dev_err(&port->dev,
+					"%s: submit urb %d failed: %d\n",
+					__func__, i, err);
+				clear_bit(i, &portdata->out_busy);
+				spin_lock_irqsave(&intfdata->susp_lock, flags);
+				intfdata->in_flight--;
+				spin_unlock_irqrestore(&intfdata->susp_lock,
+						       flags);
+				usb_autopm_put_interface_async(port->serial->interface);
+				break;
+			}
+		}
+
+		portdata->tx_start_time[i] = jiffies;
+		buf += todo;
+		left -= todo;
+	}
+
+	count -= left;
+	dev_dbg(&port->dev, "%s: wrote (did %d)\n", __func__, count);
+	return count;
+}
+EXPORT_SYMBOL(usb_wwan_write);
+
+static void usb_wwan_indat_callback(struct urb *urb)
+{
+	int err;
+	int endpoint;
+	struct usb_serial_port *port;
+	struct device *dev;
+	unsigned char *data = urb->transfer_buffer;
+	int status = urb->status;
+
+	endpoint = usb_pipeendpoint(urb->pipe);
+	port = urb->context;
+	dev = &port->dev;
+
+	if (status) {
+		dev_dbg(dev, "%s: nonzero status: %d on endpoint %02x.\n",
+			__func__, status, endpoint);
+
+		/* don't resubmit on fatal errors */
+		if (status == -ESHUTDOWN || status == -ENOENT)
+			return;
+	} else {
+		if (urb->actual_length) {
+			tty_insert_flip_string(&port->port, data,
+					urb->actual_length);
+			tty_flip_buffer_push(&port->port);
+		} else
+			dev_dbg(dev, "%s: empty read urb received\n", __func__);
+	}
+	/* Resubmit urb so we continue receiving */
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err) {
+		if (err != -EPERM && err != -ENODEV) {
+			dev_err(dev, "%s: resubmit read urb failed. (%d)\n",
+				__func__, err);
+			/* busy also in error unless we are killed */
+			usb_mark_last_busy(port->serial->dev);
+		}
+	} else {
+		usb_mark_last_busy(port->serial->dev);
+	}
+}
+
+static void usb_wwan_outdat_callback(struct urb *urb)
+{
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+	unsigned long flags;
+	int i;
+
+	port = urb->context;
+	intfdata = usb_get_serial_data(port->serial);
+
+	usb_serial_port_softint(port);
+	usb_autopm_put_interface_async(port->serial->interface);
+	portdata = usb_get_serial_port_data(port);
+	spin_lock_irqsave(&intfdata->susp_lock, flags);
+	intfdata->in_flight--;
+	spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+
+	for (i = 0; i < N_OUT_URB; ++i) {
+		if (portdata->out_urbs[i] == urb) {
+			smp_mb__before_atomic();
+			clear_bit(i, &portdata->out_busy);
+			break;
+		}
+	}
+}
+
+unsigned int usb_wwan_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_wwan_port_private *portdata;
+	int i;
+	unsigned int data_len = 0;
+	struct urb *this_urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	for (i = 0; i < N_OUT_URB; i++) {
+		this_urb = portdata->out_urbs[i];
+		if (this_urb && !test_bit(i, &portdata->out_busy))
+			data_len += OUT_BUFLEN;
+	}
+
+	dev_dbg(&port->dev, "%s: %u\n", __func__, data_len);
+	return data_len;
+}
+EXPORT_SYMBOL(usb_wwan_write_room);
+
+unsigned int usb_wwan_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_wwan_port_private *portdata;
+	int i;
+	unsigned int data_len = 0;
+	struct urb *this_urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	for (i = 0; i < N_OUT_URB; i++) {
+		this_urb = portdata->out_urbs[i];
+		/* FIXME: This locking is insufficient as this_urb may
+		   go unused during the test */
+		if (this_urb && test_bit(i, &portdata->out_busy))
+			data_len += this_urb->transfer_buffer_length;
+	}
+	dev_dbg(&port->dev, "%s: %u\n", __func__, data_len);
+	return data_len;
+}
+EXPORT_SYMBOL(usb_wwan_chars_in_buffer);
+
+int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+	struct usb_serial *serial = port->serial;
+	int i, err;
+	struct urb *urb;
+
+	portdata = usb_get_serial_port_data(port);
+	intfdata = usb_get_serial_data(serial);
+
+	if (port->interrupt_in_urb) {
+		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+		if (err) {
+			dev_err(&port->dev, "%s: submit int urb failed: %d\n",
+				__func__, err);
+		}
+	}
+
+	/* Start reading from the IN endpoint */
+	for (i = 0; i < N_IN_URB; i++) {
+		urb = portdata->in_urbs[i];
+		if (!urb)
+			continue;
+		err = usb_submit_urb(urb, GFP_KERNEL);
+		if (err) {
+			dev_err(&port->dev,
+				"%s: submit read urb %d failed: %d\n",
+				__func__, i, err);
+		}
+	}
+
+	spin_lock_irq(&intfdata->susp_lock);
+	if (++intfdata->open_ports == 1)
+		serial->interface->needs_remote_wakeup = 1;
+	spin_unlock_irq(&intfdata->susp_lock);
+	/* this balances a get in the generic USB serial code */
+	usb_autopm_put_interface(serial->interface);
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_wwan_open);
+
+static void unbusy_queued_urb(struct urb *urb,
+					struct usb_wwan_port_private *portdata)
+{
+	int i;
+
+	for (i = 0; i < N_OUT_URB; i++) {
+		if (urb == portdata->out_urbs[i]) {
+			clear_bit(i, &portdata->out_busy);
+			break;
+		}
+	}
+}
+
+void usb_wwan_close(struct usb_serial_port *port)
+{
+	int i;
+	struct usb_serial *serial = port->serial;
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial);
+	struct urb *urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	/*
+	 * Need to take susp_lock to make sure port is not already being
+	 * resumed, but no need to hold it due to the tty-port initialized
+	 * flag.
+	 */
+	spin_lock_irq(&intfdata->susp_lock);
+	if (--intfdata->open_ports == 0)
+		serial->interface->needs_remote_wakeup = 0;
+	spin_unlock_irq(&intfdata->susp_lock);
+
+	for (;;) {
+		urb = usb_get_from_anchor(&portdata->delayed);
+		if (!urb)
+			break;
+		unbusy_queued_urb(urb, portdata);
+		usb_autopm_put_interface_async(serial->interface);
+	}
+
+	for (i = 0; i < N_IN_URB; i++)
+		usb_kill_urb(portdata->in_urbs[i]);
+	for (i = 0; i < N_OUT_URB; i++)
+		usb_kill_urb(portdata->out_urbs[i]);
+	usb_kill_urb(port->interrupt_in_urb);
+
+	usb_autopm_get_interface_no_resume(serial->interface);
+}
+EXPORT_SYMBOL(usb_wwan_close);
+
+static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
+				      int endpoint,
+				      int dir, void *ctx, char *buf, int len,
+				      void (*callback) (struct urb *))
+{
+	struct usb_serial *serial = port->serial;
+	struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial);
+	struct urb *urb;
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);	/* No ISO */
+	if (!urb)
+		return NULL;
+
+	usb_fill_bulk_urb(urb, serial->dev,
+			  usb_sndbulkpipe(serial->dev, endpoint) | dir,
+			  buf, len, callback, ctx);
+
+	if (intfdata->use_zlp && dir == USB_DIR_OUT)
+		urb->transfer_flags |= URB_ZERO_PACKET;
+
+	return urb;
+}
+
+int usb_wwan_port_probe(struct usb_serial_port *port)
+{
+	struct usb_wwan_port_private *portdata;
+	struct urb *urb;
+	u8 *buffer;
+	int i;
+
+	if (!port->bulk_in_size || !port->bulk_out_size)
+		return -ENODEV;
+
+	portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
+	if (!portdata)
+		return -ENOMEM;
+
+	init_usb_anchor(&portdata->delayed);
+
+	for (i = 0; i < N_IN_URB; i++) {
+		buffer = (u8 *)__get_free_page(GFP_KERNEL);
+		if (!buffer)
+			goto bail_out_error;
+		portdata->in_buffer[i] = buffer;
+
+		urb = usb_wwan_setup_urb(port, port->bulk_in_endpointAddress,
+						USB_DIR_IN, port,
+						buffer, IN_BUFLEN,
+						usb_wwan_indat_callback);
+		portdata->in_urbs[i] = urb;
+	}
+
+	for (i = 0; i < N_OUT_URB; i++) {
+		buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
+		if (!buffer)
+			goto bail_out_error2;
+		portdata->out_buffer[i] = buffer;
+
+		urb = usb_wwan_setup_urb(port, port->bulk_out_endpointAddress,
+						USB_DIR_OUT, port,
+						buffer, OUT_BUFLEN,
+						usb_wwan_outdat_callback);
+		portdata->out_urbs[i] = urb;
+	}
+
+	usb_set_serial_port_data(port, portdata);
+
+	return 0;
+
+bail_out_error2:
+	for (i = 0; i < N_OUT_URB; i++) {
+		usb_free_urb(portdata->out_urbs[i]);
+		kfree(portdata->out_buffer[i]);
+	}
+bail_out_error:
+	for (i = 0; i < N_IN_URB; i++) {
+		usb_free_urb(portdata->in_urbs[i]);
+		free_page((unsigned long)portdata->in_buffer[i]);
+	}
+	kfree(portdata);
+
+	return -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(usb_wwan_port_probe);
+
+void usb_wwan_port_remove(struct usb_serial_port *port)
+{
+	int i;
+	struct usb_wwan_port_private *portdata;
+
+	portdata = usb_get_serial_port_data(port);
+	usb_set_serial_port_data(port, NULL);
+
+	for (i = 0; i < N_IN_URB; i++) {
+		usb_free_urb(portdata->in_urbs[i]);
+		free_page((unsigned long)portdata->in_buffer[i]);
+	}
+	for (i = 0; i < N_OUT_URB; i++) {
+		usb_free_urb(portdata->out_urbs[i]);
+		kfree(portdata->out_buffer[i]);
+	}
+
+	kfree(portdata);
+}
+EXPORT_SYMBOL(usb_wwan_port_remove);
+
+#ifdef CONFIG_PM
+static void stop_urbs(struct usb_serial *serial)
+{
+	int i, j;
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+		if (!portdata)
+			continue;
+		for (j = 0; j < N_IN_URB; j++)
+			usb_kill_urb(portdata->in_urbs[j]);
+		for (j = 0; j < N_OUT_URB; j++)
+			usb_kill_urb(portdata->out_urbs[j]);
+		usb_kill_urb(port->interrupt_in_urb);
+	}
+}
+
+int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message)
+{
+	struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial);
+
+	spin_lock_irq(&intfdata->susp_lock);
+	if (PMSG_IS_AUTO(message)) {
+		if (intfdata->in_flight) {
+			spin_unlock_irq(&intfdata->susp_lock);
+			return -EBUSY;
+		}
+	}
+	intfdata->suspended = 1;
+	spin_unlock_irq(&intfdata->susp_lock);
+
+	stop_urbs(serial);
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_wwan_suspend);
+
+/* Caller must hold susp_lock. */
+static int usb_wwan_submit_delayed_urbs(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct usb_wwan_intf_private *data = usb_get_serial_data(serial);
+	struct usb_wwan_port_private *portdata;
+	struct urb *urb;
+	int err_count = 0;
+	int err;
+
+	portdata = usb_get_serial_port_data(port);
+
+	for (;;) {
+		urb = usb_get_from_anchor(&portdata->delayed);
+		if (!urb)
+			break;
+
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err) {
+			dev_err(&port->dev, "%s: submit urb failed: %d\n",
+					__func__, err);
+			err_count++;
+			unbusy_queued_urb(urb, portdata);
+			usb_autopm_put_interface_async(serial->interface);
+			continue;
+		}
+		data->in_flight++;
+	}
+
+	if (err_count)
+		return -EIO;
+
+	return 0;
+}
+
+int usb_wwan_resume(struct usb_serial *serial)
+{
+	int i, j;
+	struct usb_serial_port *port;
+	struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial);
+	struct usb_wwan_port_private *portdata;
+	struct urb *urb;
+	int err;
+	int err_count = 0;
+
+	spin_lock_irq(&intfdata->susp_lock);
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+
+		if (!tty_port_initialized(&port->port))
+			continue;
+
+		portdata = usb_get_serial_port_data(port);
+
+		if (port->interrupt_in_urb) {
+			err = usb_submit_urb(port->interrupt_in_urb,
+					GFP_ATOMIC);
+			if (err) {
+				dev_err(&port->dev,
+					"%s: submit int urb failed: %d\n",
+					__func__, err);
+				err_count++;
+			}
+		}
+
+		err = usb_wwan_submit_delayed_urbs(port);
+		if (err)
+			err_count++;
+
+		for (j = 0; j < N_IN_URB; j++) {
+			urb = portdata->in_urbs[j];
+			err = usb_submit_urb(urb, GFP_ATOMIC);
+			if (err < 0) {
+				dev_err(&port->dev,
+					"%s: submit read urb %d failed: %d\n",
+					__func__, i, err);
+				err_count++;
+			}
+		}
+	}
+	intfdata->suspended = 0;
+	spin_unlock_irq(&intfdata->susp_lock);
+
+	if (err_count)
+		return -EIO;
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_wwan_resume);
+#endif
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
new file mode 100644
index 000000000..4412834db
--- /dev/null
+++ b/drivers/usb/serial/visor.c
@@ -0,0 +1,580 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB HandSpring Visor, Palm m50x, and Sony Clie driver
+ * (supports all of the Palm OS USB devices)
+ *
+ *	Copyright (C) 1999 - 2004
+ *	    Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/usb/cdc.h>
+#include "visor.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
+#define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
+
+/* function prototypes for a handspring visor */
+static int  visor_open(struct tty_struct *tty, struct usb_serial_port *port);
+static void visor_close(struct usb_serial_port *port);
+static int  visor_probe(struct usb_serial *serial,
+					const struct usb_device_id *id);
+static int  visor_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds);
+static int  clie_5_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds);
+static void visor_read_int_callback(struct urb *urb);
+static int  clie_3_5_startup(struct usb_serial *serial);
+static int palm_os_3_probe(struct usb_serial *serial,
+					const struct usb_device_id *id);
+static int palm_os_4_probe(struct usb_serial *serial,
+					const struct usb_device_id *id);
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_3_probe },
+	{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M100_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_TREO_650),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(ACER_VENDOR_ID, ACER_S10_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE_INTERFACE_CLASS(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID, 0xff),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(TAPWAVE_VENDOR_ID, TAPWAVE_ZODIAC_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ }					/* Terminating entry */
+};
+
+static const struct usb_device_id clie_id_5_table[] = {
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ }					/* Terminating entry */
+};
+
+static const struct usb_device_id clie_id_3_5_table[] = {
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) },
+	{ }					/* Terminating entry */
+};
+
+static const struct usb_device_id id_table_combined[] = {
+	{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
+	{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID) },
+	{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID) },
+	{ USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID) },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID) },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID) },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M100_ID) },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID) },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID) },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID) },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_TREO_650) },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID) },
+	{ USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID) },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID) },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID) },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID) },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID) },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID) },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID) },
+	{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID) },
+	{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID) },
+	{ USB_DEVICE(TAPWAVE_VENDOR_ID, TAPWAVE_ZODIAC_ID) },
+	{ USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID) },
+	{ USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID) },
+	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID) },
+	{ USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID) },
+	{ }					/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table_combined);
+
+/* All of the device info needed for the Handspring Visor,
+   and Palm 4.0 devices */
+static struct usb_serial_driver handspring_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"visor",
+	},
+	.description =		"Handspring Visor / Palm OS",
+	.id_table =		id_table,
+	.num_ports =		2,
+	.bulk_out_size =	256,
+	.open =			visor_open,
+	.close =		visor_close,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+	.probe =		visor_probe,
+	.calc_num_ports =	visor_calc_num_ports,
+	.read_int_callback =	visor_read_int_callback,
+};
+
+/* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */
+static struct usb_serial_driver clie_5_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"clie_5",
+	},
+	.description =		"Sony Clie 5.0",
+	.id_table =		clie_id_5_table,
+	.num_ports =		2,
+	.num_bulk_out =		2,
+	.bulk_out_size =	256,
+	.open =			visor_open,
+	.close =		visor_close,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+	.probe =		visor_probe,
+	.calc_num_ports =	clie_5_calc_num_ports,
+	.read_int_callback =	visor_read_int_callback,
+};
+
+/* device info for the Sony Clie OS version 3.5 */
+static struct usb_serial_driver clie_3_5_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"clie_3.5",
+	},
+	.description =		"Sony Clie 3.5",
+	.id_table =		clie_id_3_5_table,
+	.num_ports =		1,
+	.bulk_out_size =	256,
+	.open =			visor_open,
+	.close =		visor_close,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+	.attach =		clie_3_5_startup,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&handspring_device, &clie_5_device, &clie_3_5_device, NULL
+};
+
+/******************************************************************************
+ * Handspring Visor specific driver functions
+ ******************************************************************************/
+static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	int result = 0;
+
+	if (!port->read_urb) {
+		/* this is needed for some brain dead Sony devices */
+		dev_err(&port->dev, "Device lied about number of ports, please use a lower one.\n");
+		return -ENODEV;
+	}
+
+	/* Start reading from the device */
+	result = usb_serial_generic_open(tty, port);
+	if (result)
+		goto exit;
+
+	if (port->interrupt_in_urb) {
+		dev_dbg(&port->dev, "adding interrupt input for treo\n");
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+		if (result)
+			dev_err(&port->dev,
+			    "%s - failed submitting interrupt urb, error %d\n",
+							__func__, result);
+	}
+exit:
+	return result;
+}
+
+
+static void visor_close(struct usb_serial_port *port)
+{
+	unsigned char *transfer_buffer;
+
+	usb_serial_generic_close(port);
+	usb_kill_urb(port->interrupt_in_urb);
+
+	transfer_buffer = kmalloc(0x12, GFP_KERNEL);
+	if (!transfer_buffer)
+		return;
+	usb_control_msg(port->serial->dev,
+					 usb_rcvctrlpipe(port->serial->dev, 0),
+					 VISOR_CLOSE_NOTIFICATION, 0xc2,
+					 0x0000, 0x0000,
+					 transfer_buffer, 0x12, 300);
+	kfree(transfer_buffer);
+}
+
+static void visor_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	int status = urb->status;
+	int result;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
+		return;
+	default:
+		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
+		goto exit;
+	}
+
+	/*
+	 * This information is still unknown what it can be used for.
+	 * If anyone has an idea, please let the author know...
+	 *
+	 * Rumor has it this endpoint is used to notify when data
+	 * is ready to be read from the bulk ones.
+	 */
+	usb_serial_debug_data(&port->dev, __func__, urb->actual_length,
+			      urb->transfer_buffer);
+
+exit:
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result)
+		dev_err(&urb->dev->dev,
+				"%s - Error %d submitting interrupt urb\n",
+							__func__, result);
+}
+
+static int palm_os_3_probe(struct usb_serial *serial,
+						const struct usb_device_id *id)
+{
+	struct device *dev = &serial->dev->dev;
+	struct visor_connection_info *connection_info;
+	unsigned char *transfer_buffer;
+	char *string;
+	int retval = 0;
+	int i;
+	int num_ports = 0;
+
+	transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL);
+	if (!transfer_buffer)
+		return -ENOMEM;
+
+	/* send a get connection info request */
+	retval = usb_control_msg(serial->dev,
+				  usb_rcvctrlpipe(serial->dev, 0),
+				  VISOR_GET_CONNECTION_INFORMATION,
+				  0xc2, 0x0000, 0x0000, transfer_buffer,
+				  sizeof(*connection_info), 300);
+	if (retval < 0) {
+		dev_err(dev, "%s - error %d getting connection information\n",
+			__func__, retval);
+		goto exit;
+	}
+
+	if (retval != sizeof(*connection_info)) {
+		dev_err(dev, "Invalid connection information received from device\n");
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	connection_info = (struct visor_connection_info *)transfer_buffer;
+
+	num_ports = le16_to_cpu(connection_info->num_ports);
+
+	/* Handle devices that report invalid stuff here. */
+	if (num_ports == 0 || num_ports > 2) {
+		dev_warn(dev, "%s: No valid connect info available\n",
+			serial->type->description);
+		num_ports = 2;
+	}
+
+	for (i = 0; i < num_ports; ++i) {
+		switch (connection_info->connections[i].port_function_id) {
+		case VISOR_FUNCTION_GENERIC:
+			string = "Generic";
+			break;
+		case VISOR_FUNCTION_DEBUGGER:
+			string = "Debugger";
+			break;
+		case VISOR_FUNCTION_HOTSYNC:
+			string = "HotSync";
+			break;
+		case VISOR_FUNCTION_CONSOLE:
+			string = "Console";
+			break;
+		case VISOR_FUNCTION_REMOTE_FILE_SYS:
+			string = "Remote File System";
+			break;
+		default:
+			string = "unknown";
+			break;
+		}
+		dev_info(dev, "%s: port %d, is for %s use\n",
+			serial->type->description,
+			connection_info->connections[i].port, string);
+	}
+	dev_info(dev, "%s: Number of ports: %d\n", serial->type->description,
+		num_ports);
+
+	/*
+	 * save off our num_ports info so that we can use it in the
+	 * calc_num_ports callback
+	 */
+	usb_set_serial_data(serial, (void *)(long)num_ports);
+
+	/* ask for the number of bytes available, but ignore the
+	   response as it is broken */
+	retval = usb_control_msg(serial->dev,
+				  usb_rcvctrlpipe(serial->dev, 0),
+				  VISOR_REQUEST_BYTES_AVAILABLE,
+				  0xc2, 0x0000, 0x0005, transfer_buffer,
+				  0x02, 300);
+	if (retval < 0)
+		dev_err(dev, "%s - error %d getting bytes available request\n",
+			__func__, retval);
+	retval = 0;
+
+exit:
+	kfree(transfer_buffer);
+
+	return retval;
+}
+
+static int palm_os_4_probe(struct usb_serial *serial,
+						const struct usb_device_id *id)
+{
+	struct device *dev = &serial->dev->dev;
+	struct palm_ext_connection_info *connection_info;
+	unsigned char *transfer_buffer;
+	int retval;
+
+	transfer_buffer =  kmalloc(sizeof(*connection_info), GFP_KERNEL);
+	if (!transfer_buffer)
+		return -ENOMEM;
+
+	retval = usb_control_msg(serial->dev,
+				  usb_rcvctrlpipe(serial->dev, 0),
+				  PALM_GET_EXT_CONNECTION_INFORMATION,
+				  0xc2, 0x0000, 0x0000, transfer_buffer,
+				  sizeof(*connection_info), 300);
+	if (retval < 0)
+		dev_err(dev, "%s - error %d getting connection info\n",
+			__func__, retval);
+	else
+		usb_serial_debug_data(dev, __func__, retval, transfer_buffer);
+
+	kfree(transfer_buffer);
+	return 0;
+}
+
+
+static int visor_probe(struct usb_serial *serial,
+					const struct usb_device_id *id)
+{
+	int retval = 0;
+	int (*startup)(struct usb_serial *serial,
+					const struct usb_device_id *id);
+
+	/*
+	 * some Samsung Android phones in modem mode have the same ID
+	 * as SPH-I500, but they are ACM devices, so dont bind to them
+	 */
+	if (id->idVendor == SAMSUNG_VENDOR_ID &&
+		id->idProduct == SAMSUNG_SPH_I500_ID &&
+		serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM &&
+		serial->dev->descriptor.bDeviceSubClass ==
+			USB_CDC_SUBCLASS_ACM)
+		return -ENODEV;
+
+	if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
+		dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
+			serial->dev->actconfig->desc.bConfigurationValue);
+		return -ENODEV;
+	}
+
+	if (id->driver_info) {
+		startup = (void *)id->driver_info;
+		retval = startup(serial, id);
+	}
+
+	return retval;
+}
+
+static int visor_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds)
+{
+	unsigned int vid = le16_to_cpu(serial->dev->descriptor.idVendor);
+	int num_ports = (int)(long)(usb_get_serial_data(serial));
+
+	if (num_ports)
+		usb_set_serial_data(serial, NULL);
+
+	/*
+	 * Only swap the bulk endpoints for the Handspring devices with
+	 * interrupt in endpoints, which for now are the Treo devices.
+	 */
+	if (!(vid == HANDSPRING_VENDOR_ID || vid == KYOCERA_VENDOR_ID) ||
+			epds->num_interrupt_in == 0)
+		goto out;
+
+	if (epds->num_bulk_in < 2 || epds->num_interrupt_in < 2) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * It appears that Treos and Kyoceras want to use the
+	 * 1st bulk in endpoint to communicate with the 2nd bulk out endpoint,
+	 * so let's swap the 1st and 2nd bulk in and interrupt endpoints.
+	 * Note that swapping the bulk out endpoints would break lots of
+	 * apps that want to communicate on the second port.
+	 */
+	swap(epds->bulk_in[0], epds->bulk_in[1]);
+	swap(epds->interrupt_in[0], epds->interrupt_in[1]);
+out:
+	return num_ports;
+}
+
+static int clie_5_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds)
+{
+	/*
+	 * TH55 registers 2 ports.
+	 * Communication in from the UX50/TH55 uses the first bulk-in
+	 * endpoint, while communication out to the UX50/TH55 uses the second
+	 * bulk-out endpoint.
+	 */
+
+	/*
+	 * FIXME: Should we swap the descriptors instead of using the same
+	 *        bulk-out endpoint for both ports?
+	 */
+	epds->bulk_out[0] = epds->bulk_out[1];
+
+	return serial->type->num_ports;
+}
+
+static int clie_3_5_startup(struct usb_serial *serial)
+{
+	struct device *dev = &serial->dev->dev;
+	int result;
+	u8 *data;
+
+	data = kmalloc(1, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	/*
+	 * Note that PEG-300 series devices expect the following two calls.
+	 */
+
+	/* get the config number */
+	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+				  USB_REQ_GET_CONFIGURATION, USB_DIR_IN,
+				  0, 0, data, 1, 3000);
+	if (result < 0) {
+		dev_err(dev, "%s: get config number failed: %d\n",
+							__func__, result);
+		goto out;
+	}
+	if (result != 1) {
+		dev_err(dev, "%s: get config number bad return length: %d\n",
+							__func__, result);
+		result = -EIO;
+		goto out;
+	}
+
+	/* get the interface number */
+	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+				  USB_REQ_GET_INTERFACE,
+				  USB_DIR_IN | USB_RECIP_INTERFACE,
+				  0, 0, data, 1, 3000);
+	if (result < 0) {
+		dev_err(dev, "%s: get interface number failed: %d\n",
+							__func__, result);
+		goto out;
+	}
+	if (result != 1) {
+		dev_err(dev,
+			"%s: get interface number bad return length: %d\n",
+							__func__, result);
+		result = -EIO;
+		goto out;
+	}
+
+	result = 0;
+out:
+	kfree(data);
+
+	return result;
+}
+
+module_usb_serial_driver(serial_drivers, id_table_combined);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/visor.h b/drivers/usb/serial/visor.h
new file mode 100644
index 000000000..622d639ce
--- /dev/null
+++ b/drivers/usb/serial/visor.h
@@ -0,0 +1,157 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * USB HandSpring Visor driver
+ *
+ *	Copyright (C) 1999 - 2003
+ *	    Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver.
+ *
+ */
+
+#ifndef __LINUX_USB_SERIAL_VISOR_H
+#define __LINUX_USB_SERIAL_VISOR_H
+
+
+#define HANDSPRING_VENDOR_ID		0x082d
+#define HANDSPRING_VISOR_ID		0x0100
+#define HANDSPRING_TREO_ID		0x0200
+#define HANDSPRING_TREO600_ID		0x0300
+
+#define PALM_VENDOR_ID			0x0830
+#define PALM_M500_ID			0x0001
+#define PALM_M505_ID			0x0002
+#define PALM_M515_ID			0x0003
+#define PALM_I705_ID			0x0020
+#define PALM_M125_ID			0x0040
+#define PALM_M130_ID			0x0050
+#define PALM_TUNGSTEN_T_ID		0x0060
+#define PALM_TREO_650			0x0061
+#define PALM_TUNGSTEN_Z_ID		0x0031
+#define PALM_ZIRE_ID			0x0070
+#define PALM_M100_ID			0x0080
+
+#define GSPDA_VENDOR_ID		0x115e
+#define GSPDA_XPLORE_M68_ID		0xf100
+
+#define SONY_VENDOR_ID			0x054C
+#define SONY_CLIE_3_5_ID		0x0038
+#define SONY_CLIE_4_0_ID		0x0066
+#define SONY_CLIE_S360_ID		0x0095
+#define SONY_CLIE_4_1_ID		0x009A
+#define SONY_CLIE_NX60_ID		0x00DA
+#define SONY_CLIE_NZ90V_ID		0x00E9
+#define SONY_CLIE_UX50_ID		0x0144
+#define SONY_CLIE_TJ25_ID		0x0169
+
+#define ACER_VENDOR_ID			0x0502
+#define ACER_S10_ID			0x0001
+
+#define SAMSUNG_VENDOR_ID		0x04E8
+#define SAMSUNG_SCH_I330_ID		0x8001
+#define SAMSUNG_SPH_I500_ID		0x6601
+
+#define TAPWAVE_VENDOR_ID		0x12EF
+#define TAPWAVE_ZODIAC_ID		0x0100
+
+#define GARMIN_VENDOR_ID		0x091E
+#define GARMIN_IQUE_3600_ID		0x0004
+
+#define ACEECA_VENDOR_ID		0x4766
+#define ACEECA_MEZ1000_ID		0x0001
+
+#define KYOCERA_VENDOR_ID		0x0C88
+#define KYOCERA_7135_ID			0x0021
+
+#define FOSSIL_VENDOR_ID		0x0E67
+#define FOSSIL_ABACUS_ID		0x0002
+
+/****************************************************************************
+ * Handspring Visor Vendor specific request codes (bRequest values)
+ * A big thank you to Handspring for providing the following information.
+ * If anyone wants the original file where these values and structures came
+ * from, send email to <greg@kroah.com>.
+ ****************************************************************************/
+
+/****************************************************************************
+ * VISOR_REQUEST_BYTES_AVAILABLE asks the visor for the number of bytes that
+ * are available to be transferred to the host for the specified endpoint.
+ * Currently this is not used, and always returns 0x0001
+ ****************************************************************************/
+#define VISOR_REQUEST_BYTES_AVAILABLE		0x01
+
+/****************************************************************************
+ * VISOR_CLOSE_NOTIFICATION is set to the device to notify it that the host
+ * is now closing the pipe. An empty packet is sent in response.
+ ****************************************************************************/
+#define VISOR_CLOSE_NOTIFICATION		0x02
+
+/****************************************************************************
+ * VISOR_GET_CONNECTION_INFORMATION is sent by the host during enumeration to
+ * get the endpoints used by the connection.
+ ****************************************************************************/
+#define VISOR_GET_CONNECTION_INFORMATION	0x03
+
+
+/****************************************************************************
+ * VISOR_GET_CONNECTION_INFORMATION returns data in the following format
+ ****************************************************************************/
+struct visor_connection_info {
+	__le16	num_ports;
+	struct {
+		__u8	port_function_id;
+		__u8	port;
+	} connections[2];
+};
+
+
+/* struct visor_connection_info.connection[x].port defines: */
+#define VISOR_ENDPOINT_1		0x01
+#define VISOR_ENDPOINT_2		0x02
+
+/* struct visor_connection_info.connection[x].port_function_id defines: */
+#define VISOR_FUNCTION_GENERIC		0x00
+#define VISOR_FUNCTION_DEBUGGER		0x01
+#define VISOR_FUNCTION_HOTSYNC		0x02
+#define VISOR_FUNCTION_CONSOLE		0x03
+#define VISOR_FUNCTION_REMOTE_FILE_SYS	0x04
+
+
+/****************************************************************************
+ * PALM_GET_SOME_UNKNOWN_INFORMATION is sent by the host during enumeration to
+ * get some information from the M series devices, that is currently unknown.
+ ****************************************************************************/
+#define PALM_GET_EXT_CONNECTION_INFORMATION	0x04
+
+/**
+ * struct palm_ext_connection_info - return data from a PALM_GET_EXT_CONNECTION_INFORMATION request
+ * @num_ports: maximum number of functions/connections in use
+ * @endpoint_numbers_different: will be 1 if in and out endpoints numbers are
+ *	different, otherwise it is 0.  If value is 1, then
+ *	connections.end_point_info is non-zero.  If value is 0, then
+ *	connections.port contains the endpoint number, which is the same for in
+ *	and out.
+ * @port_function_id: contains the creator id of the application that opened
+ *	this connection.
+ * @port: contains the in/out endpoint number.  Is 0 if in and out endpoint
+ *	numbers are different.
+ * @end_point_info: high nubbe is in endpoint and low nibble will indicate out
+ *	endpoint.  Is 0 if in and out endpoints are the same.
+ *
+ * The maximum number of connections currently supported is 2
+ */
+struct palm_ext_connection_info {
+	__u8 num_ports;
+	__u8 endpoint_numbers_different;
+	__le16 reserved1;
+	struct {
+		__u32 port_function_id;
+		__u8 port;
+		__u8 end_point_info;
+		__le16 reserved;
+	} connections[2];
+};
+
+#endif
+
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
new file mode 100644
index 000000000..7f82d4075
--- /dev/null
+++ b/drivers/usb/serial/whiteheat.c
@@ -0,0 +1,808 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * USB ConnectTech WhiteHEAT driver
+ *
+ *	Copyright (C) 2002
+ *	    Connect Tech Inc.
+ *
+ *	Copyright (C) 1999 - 2001
+ *	    Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <asm/termbits.h>
+#include <linux/usb.h>
+#include <linux/serial_reg.h>
+#include <linux/serial.h>
+#include <linux/usb/serial.h>
+#include <linux/usb/ezusb.h>
+#include "whiteheat.h"			/* WhiteHEAT specific commands */
+
+/*
+ * Version Information
+ */
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>"
+#define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
+
+#define CONNECT_TECH_VENDOR_ID		0x0710
+#define CONNECT_TECH_FAKE_WHITE_HEAT_ID	0x0001
+#define CONNECT_TECH_WHITE_HEAT_ID	0x8001
+
+/*
+   ID tables for whiteheat are unusual, because we want to different
+   things for different versions of the device.  Eventually, this
+   will be doable from a single table.  But, for now, we define two
+   separate ID tables, and then a third table that combines them
+   just for the purpose of exporting the autoloading information.
+*/
+static const struct usb_device_id id_table_std[] = {
+	{ USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
+	{ }						/* Terminating entry */
+};
+
+static const struct usb_device_id id_table_prerenumeration[] = {
+	{ USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
+	{ }						/* Terminating entry */
+};
+
+static const struct usb_device_id id_table_combined[] = {
+	{ USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
+	{ USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table_combined);
+
+
+/* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
+static int  whiteheat_firmware_download(struct usb_serial *serial,
+					const struct usb_device_id *id);
+static int  whiteheat_firmware_attach(struct usb_serial *serial);
+
+/* function prototypes for the Connect Tech WhiteHEAT serial converter */
+static int  whiteheat_attach(struct usb_serial *serial);
+static void whiteheat_release(struct usb_serial *serial);
+static int  whiteheat_port_probe(struct usb_serial_port *port);
+static void whiteheat_port_remove(struct usb_serial_port *port);
+static int  whiteheat_open(struct tty_struct *tty,
+			struct usb_serial_port *port);
+static void whiteheat_close(struct usb_serial_port *port);
+static void whiteheat_get_serial(struct tty_struct *tty,
+			struct serial_struct *ss);
+static void whiteheat_set_termios(struct tty_struct *tty,
+				  struct usb_serial_port *port,
+				  const struct ktermios *old_termios);
+static int  whiteheat_tiocmget(struct tty_struct *tty);
+static int  whiteheat_tiocmset(struct tty_struct *tty,
+			unsigned int set, unsigned int clear);
+static void whiteheat_break_ctl(struct tty_struct *tty, int break_state);
+
+static struct usb_serial_driver whiteheat_fake_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"whiteheatnofirm",
+	},
+	.description =		"Connect Tech - WhiteHEAT - (prerenumeration)",
+	.id_table =		id_table_prerenumeration,
+	.num_ports =		1,
+	.probe =		whiteheat_firmware_download,
+	.attach =		whiteheat_firmware_attach,
+};
+
+static struct usb_serial_driver whiteheat_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"whiteheat",
+	},
+	.description =		"Connect Tech - WhiteHEAT",
+	.id_table =		id_table_std,
+	.num_ports =		4,
+	.num_bulk_in =		5,
+	.num_bulk_out =		5,
+	.attach =		whiteheat_attach,
+	.release =		whiteheat_release,
+	.port_probe =		whiteheat_port_probe,
+	.port_remove =		whiteheat_port_remove,
+	.open =			whiteheat_open,
+	.close =		whiteheat_close,
+	.get_serial =		whiteheat_get_serial,
+	.set_termios =		whiteheat_set_termios,
+	.break_ctl =		whiteheat_break_ctl,
+	.tiocmget =		whiteheat_tiocmget,
+	.tiocmset =		whiteheat_tiocmset,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&whiteheat_fake_device, &whiteheat_device, NULL
+};
+
+struct whiteheat_command_private {
+	struct mutex		mutex;
+	__u8			port_running;
+	__u8			command_finished;
+	wait_queue_head_t	wait_command; /* for handling sleeping whilst
+						 waiting for a command to
+						 finish */
+	__u8			result_buffer[64];
+};
+
+struct whiteheat_private {
+	__u8			mcr;		/* FIXME: no locking on mcr */
+};
+
+
+/* local function prototypes */
+static int start_command_port(struct usb_serial *serial);
+static void stop_command_port(struct usb_serial *serial);
+static void command_port_write_callback(struct urb *urb);
+static void command_port_read_callback(struct urb *urb);
+
+static int firm_send_command(struct usb_serial_port *port, __u8 command,
+						__u8 *data, __u8 datasize);
+static int firm_open(struct usb_serial_port *port);
+static int firm_close(struct usb_serial_port *port);
+static void firm_setup_port(struct tty_struct *tty);
+static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
+static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
+static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
+static int firm_purge(struct usb_serial_port *port, __u8 rxtx);
+static int firm_get_dtr_rts(struct usb_serial_port *port);
+static int firm_report_tx_done(struct usb_serial_port *port);
+
+
+#define COMMAND_PORT		4
+#define COMMAND_TIMEOUT		(2*HZ)	/* 2 second timeout for a command */
+#define	COMMAND_TIMEOUT_MS	2000
+
+
+/*****************************************************************************
+ * Connect Tech's White Heat prerenumeration driver functions
+ *****************************************************************************/
+
+/* steps to download the firmware to the WhiteHEAT device:
+ - hold the reset (by writing to the reset bit of the CPUCS register)
+ - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD
+ - release the reset (by writing to the CPUCS register)
+ - download the WH.HEX file for all addresses greater than 0x1b3f using
+   VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD
+ - hold the reset
+ - download the WH.HEX file for all addresses less than 0x1b40 using
+   VENDOR_REQUEST_ANCHOR_LOAD
+ - release the reset
+ - device renumerated itself and comes up as new device id with all
+   firmware download completed.
+*/
+static int whiteheat_firmware_download(struct usb_serial *serial,
+					const struct usb_device_id *id)
+{
+	int response;
+
+	response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat_loader.fw");
+	if (response >= 0) {
+		response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat.fw");
+		if (response >= 0)
+			return 0;
+	}
+	return -ENOENT;
+}
+
+
+static int whiteheat_firmware_attach(struct usb_serial *serial)
+{
+	/* We want this device to fail to have a driver assigned to it */
+	return 1;
+}
+
+
+/*****************************************************************************
+ * Connect Tech's White Heat serial driver functions
+ *****************************************************************************/
+
+static int whiteheat_attach(struct usb_serial *serial)
+{
+	struct usb_serial_port *command_port;
+	struct whiteheat_command_private *command_info;
+	struct whiteheat_hw_info *hw_info;
+	int pipe;
+	int ret;
+	int alen;
+	__u8 *command;
+	__u8 *result;
+
+	command_port = serial->port[COMMAND_PORT];
+
+	pipe = usb_sndbulkpipe(serial->dev,
+			command_port->bulk_out_endpointAddress);
+	command = kmalloc(2, GFP_KERNEL);
+	if (!command)
+		goto no_command_buffer;
+	command[0] = WHITEHEAT_GET_HW_INFO;
+	command[1] = 0;
+
+	result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
+	if (!result)
+		goto no_result_buffer;
+	/*
+	 * When the module is reloaded the firmware is still there and
+	 * the endpoints are still in the usb core unchanged. This is the
+	 * unlinking bug in disguise. Same for the call below.
+	 */
+	usb_clear_halt(serial->dev, pipe);
+	ret = usb_bulk_msg(serial->dev, pipe, command, 2,
+						&alen, COMMAND_TIMEOUT_MS);
+	if (ret) {
+		dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n",
+			serial->type->description, ret);
+		goto no_firmware;
+	} else if (alen != 2) {
+		dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n",
+			serial->type->description, alen);
+		goto no_firmware;
+	}
+
+	pipe = usb_rcvbulkpipe(serial->dev,
+				command_port->bulk_in_endpointAddress);
+	/* See the comment on the usb_clear_halt() above */
+	usb_clear_halt(serial->dev, pipe);
+	ret = usb_bulk_msg(serial->dev, pipe, result,
+			sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
+	if (ret) {
+		dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n",
+			serial->type->description, ret);
+		goto no_firmware;
+	} else if (alen != sizeof(*hw_info) + 1) {
+		dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n",
+			serial->type->description, alen);
+		goto no_firmware;
+	} else if (result[0] != command[0]) {
+		dev_err(&serial->dev->dev, "%s: Command failed [%d]\n",
+			serial->type->description, result[0]);
+		goto no_firmware;
+	}
+
+	hw_info = (struct whiteheat_hw_info *)&result[1];
+
+	dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n",
+		 serial->type->description,
+		 hw_info->sw_major_rev, hw_info->sw_minor_rev);
+
+	command_info = kmalloc(sizeof(struct whiteheat_command_private),
+								GFP_KERNEL);
+	if (!command_info)
+		goto no_command_private;
+
+	mutex_init(&command_info->mutex);
+	command_info->port_running = 0;
+	init_waitqueue_head(&command_info->wait_command);
+	usb_set_serial_port_data(command_port, command_info);
+	command_port->write_urb->complete = command_port_write_callback;
+	command_port->read_urb->complete = command_port_read_callback;
+	kfree(result);
+	kfree(command);
+
+	return 0;
+
+no_firmware:
+	/* Firmware likely not running */
+	dev_err(&serial->dev->dev,
+		"%s: Unable to retrieve firmware version, try replugging\n",
+		serial->type->description);
+	dev_err(&serial->dev->dev,
+		"%s: If the firmware is not running (status led not blinking)\n",
+		serial->type->description);
+	dev_err(&serial->dev->dev,
+		"%s: please contact support@connecttech.com\n",
+		serial->type->description);
+	kfree(result);
+	kfree(command);
+	return -ENODEV;
+
+no_command_private:
+	kfree(result);
+no_result_buffer:
+	kfree(command);
+no_command_buffer:
+	return -ENOMEM;
+}
+
+static void whiteheat_release(struct usb_serial *serial)
+{
+	struct usb_serial_port *command_port;
+
+	/* free up our private data for our command port */
+	command_port = serial->port[COMMAND_PORT];
+	kfree(usb_get_serial_port_data(command_port));
+}
+
+static int whiteheat_port_probe(struct usb_serial_port *port)
+{
+	struct whiteheat_private *info;
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	usb_set_serial_port_data(port, info);
+
+	return 0;
+}
+
+static void whiteheat_port_remove(struct usb_serial_port *port)
+{
+	struct whiteheat_private *info;
+
+	info = usb_get_serial_port_data(port);
+	kfree(info);
+}
+
+static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	int retval;
+
+	retval = start_command_port(port->serial);
+	if (retval)
+		goto exit;
+
+	/* send an open port command */
+	retval = firm_open(port);
+	if (retval) {
+		stop_command_port(port->serial);
+		goto exit;
+	}
+
+	retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX);
+	if (retval) {
+		firm_close(port);
+		stop_command_port(port->serial);
+		goto exit;
+	}
+
+	if (tty)
+		firm_setup_port(tty);
+
+	/* Work around HCD bugs */
+	usb_clear_halt(port->serial->dev, port->read_urb->pipe);
+	usb_clear_halt(port->serial->dev, port->write_urb->pipe);
+
+	retval = usb_serial_generic_open(tty, port);
+	if (retval) {
+		firm_close(port);
+		stop_command_port(port->serial);
+		goto exit;
+	}
+exit:
+	return retval;
+}
+
+
+static void whiteheat_close(struct usb_serial_port *port)
+{
+	firm_report_tx_done(port);
+	firm_close(port);
+
+	usb_serial_generic_close(port);
+
+	stop_command_port(port->serial);
+}
+
+static int whiteheat_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct whiteheat_private *info = usb_get_serial_port_data(port);
+	unsigned int modem_signals = 0;
+
+	firm_get_dtr_rts(port);
+	if (info->mcr & UART_MCR_DTR)
+		modem_signals |= TIOCM_DTR;
+	if (info->mcr & UART_MCR_RTS)
+		modem_signals |= TIOCM_RTS;
+
+	return modem_signals;
+}
+
+static int whiteheat_tiocmset(struct tty_struct *tty,
+			       unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct whiteheat_private *info = usb_get_serial_port_data(port);
+
+	if (set & TIOCM_RTS)
+		info->mcr |= UART_MCR_RTS;
+	if (set & TIOCM_DTR)
+		info->mcr |= UART_MCR_DTR;
+
+	if (clear & TIOCM_RTS)
+		info->mcr &= ~UART_MCR_RTS;
+	if (clear & TIOCM_DTR)
+		info->mcr &= ~UART_MCR_DTR;
+
+	firm_set_dtr(port, info->mcr & UART_MCR_DTR);
+	firm_set_rts(port, info->mcr & UART_MCR_RTS);
+	return 0;
+}
+
+
+static void whiteheat_get_serial(struct tty_struct *tty, struct serial_struct *ss)
+{
+	ss->baud_base = 460800;
+}
+
+
+static void whiteheat_set_termios(struct tty_struct *tty,
+				  struct usb_serial_port *port,
+				  const struct ktermios *old_termios)
+{
+	firm_setup_port(tty);
+}
+
+static void whiteheat_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	firm_set_break(port, break_state);
+}
+
+
+/*****************************************************************************
+ * Connect Tech's White Heat callback routines
+ *****************************************************************************/
+static void command_port_write_callback(struct urb *urb)
+{
+	int status = urb->status;
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status);
+		return;
+	}
+}
+
+
+static void command_port_read_callback(struct urb *urb)
+{
+	struct usb_serial_port *command_port = urb->context;
+	struct whiteheat_command_private *command_info;
+	int status = urb->status;
+	unsigned char *data = urb->transfer_buffer;
+	int result;
+
+	command_info = usb_get_serial_port_data(command_port);
+	if (!command_info) {
+		dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__);
+		return;
+	}
+	if (!urb->actual_length) {
+		dev_dbg(&urb->dev->dev, "%s - empty response, exiting.\n", __func__);
+		return;
+	}
+	if (status) {
+		dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status);
+		if (status != -ENOENT)
+			command_info->command_finished = WHITEHEAT_CMD_FAILURE;
+		wake_up(&command_info->wait_command);
+		return;
+	}
+
+	usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data);
+
+	if (data[0] == WHITEHEAT_CMD_COMPLETE) {
+		command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
+		wake_up(&command_info->wait_command);
+	} else if (data[0] == WHITEHEAT_CMD_FAILURE) {
+		command_info->command_finished = WHITEHEAT_CMD_FAILURE;
+		wake_up(&command_info->wait_command);
+	} else if (data[0] == WHITEHEAT_EVENT) {
+		/* These are unsolicited reports from the firmware, hence no
+		   waiting command to wakeup */
+		dev_dbg(&urb->dev->dev, "%s - event received\n", __func__);
+	} else if ((data[0] == WHITEHEAT_GET_DTR_RTS) &&
+		(urb->actual_length - 1 <= sizeof(command_info->result_buffer))) {
+		memcpy(command_info->result_buffer, &data[1],
+						urb->actual_length - 1);
+		command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
+		wake_up(&command_info->wait_command);
+	} else
+		dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__);
+
+	/* Continue trying to always read */
+	result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
+	if (result)
+		dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n",
+			__func__, result);
+}
+
+
+/*****************************************************************************
+ * Connect Tech's White Heat firmware interface
+ *****************************************************************************/
+static int firm_send_command(struct usb_serial_port *port, __u8 command,
+						__u8 *data, __u8 datasize)
+{
+	struct usb_serial_port *command_port;
+	struct whiteheat_command_private *command_info;
+	struct whiteheat_private *info;
+	struct device *dev = &port->dev;
+	__u8 *transfer_buffer;
+	int retval = 0;
+	int t;
+
+	dev_dbg(dev, "%s - command %d\n", __func__, command);
+
+	command_port = port->serial->port[COMMAND_PORT];
+	command_info = usb_get_serial_port_data(command_port);
+
+	if (command_port->bulk_out_size < datasize + 1)
+		return -EIO;
+
+	mutex_lock(&command_info->mutex);
+	command_info->command_finished = false;
+
+	transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
+	transfer_buffer[0] = command;
+	memcpy(&transfer_buffer[1], data, datasize);
+	command_port->write_urb->transfer_buffer_length = datasize + 1;
+	retval = usb_submit_urb(command_port->write_urb, GFP_NOIO);
+	if (retval) {
+		dev_dbg(dev, "%s - submit urb failed\n", __func__);
+		goto exit;
+	}
+
+	/* wait for the command to complete */
+	t = wait_event_timeout(command_info->wait_command,
+		(bool)command_info->command_finished, COMMAND_TIMEOUT);
+	if (!t)
+		usb_kill_urb(command_port->write_urb);
+
+	if (command_info->command_finished == false) {
+		dev_dbg(dev, "%s - command timed out.\n", __func__);
+		retval = -ETIMEDOUT;
+		goto exit;
+	}
+
+	if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) {
+		dev_dbg(dev, "%s - command failed.\n", __func__);
+		retval = -EIO;
+		goto exit;
+	}
+
+	if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
+		dev_dbg(dev, "%s - command completed.\n", __func__);
+		switch (command) {
+		case WHITEHEAT_GET_DTR_RTS:
+			info = usb_get_serial_port_data(port);
+			info->mcr = command_info->result_buffer[0];
+			break;
+		}
+	}
+exit:
+	mutex_unlock(&command_info->mutex);
+	return retval;
+}
+
+
+static int firm_open(struct usb_serial_port *port)
+{
+	struct whiteheat_simple open_command;
+
+	open_command.port = port->port_number + 1;
+	return firm_send_command(port, WHITEHEAT_OPEN,
+		(__u8 *)&open_command, sizeof(open_command));
+}
+
+
+static int firm_close(struct usb_serial_port *port)
+{
+	struct whiteheat_simple close_command;
+
+	close_command.port = port->port_number + 1;
+	return firm_send_command(port, WHITEHEAT_CLOSE,
+			(__u8 *)&close_command, sizeof(close_command));
+}
+
+
+static void firm_setup_port(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct device *dev = &port->dev;
+	struct whiteheat_port_settings port_settings;
+	unsigned int cflag = tty->termios.c_cflag;
+	speed_t baud;
+
+	port_settings.port = port->port_number + 1;
+
+	port_settings.bits = tty_get_char_size(cflag);
+	dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits);
+
+	/* determine the parity */
+	if (cflag & PARENB)
+		if (cflag & CMSPAR)
+			if (cflag & PARODD)
+				port_settings.parity = WHITEHEAT_PAR_MARK;
+			else
+				port_settings.parity = WHITEHEAT_PAR_SPACE;
+		else
+			if (cflag & PARODD)
+				port_settings.parity = WHITEHEAT_PAR_ODD;
+			else
+				port_settings.parity = WHITEHEAT_PAR_EVEN;
+	else
+		port_settings.parity = WHITEHEAT_PAR_NONE;
+	dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity);
+
+	/* figure out the stop bits requested */
+	if (cflag & CSTOPB)
+		port_settings.stop = 2;
+	else
+		port_settings.stop = 1;
+	dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop);
+
+	/* figure out the flow control settings */
+	if (cflag & CRTSCTS)
+		port_settings.hflow = (WHITEHEAT_HFLOW_CTS |
+						WHITEHEAT_HFLOW_RTS);
+	else
+		port_settings.hflow = WHITEHEAT_HFLOW_NONE;
+	dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__,
+	    (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "",
+	    (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
+	    (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
+	    (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
+
+	/* determine software flow control */
+	if (I_IXOFF(tty))
+		port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
+	else
+		port_settings.sflow = WHITEHEAT_SFLOW_NONE;
+	dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow);
+
+	port_settings.xon = START_CHAR(tty);
+	port_settings.xoff = STOP_CHAR(tty);
+	dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff);
+
+	/* get the baud rate wanted */
+	baud = tty_get_baud_rate(tty);
+	port_settings.baud = cpu_to_le32(baud);
+	dev_dbg(dev, "%s - baud rate = %u\n", __func__, baud);
+
+	/* fixme: should set validated settings */
+	tty_encode_baud_rate(tty, baud, baud);
+
+	/* handle any settings that aren't specified in the tty structure */
+	port_settings.lloop = 0;
+
+	/* now send the message to the device */
+	firm_send_command(port, WHITEHEAT_SETUP_PORT,
+			(__u8 *)&port_settings, sizeof(port_settings));
+}
+
+
+static int firm_set_rts(struct usb_serial_port *port, __u8 onoff)
+{
+	struct whiteheat_set_rdb rts_command;
+
+	rts_command.port = port->port_number + 1;
+	rts_command.state = onoff;
+	return firm_send_command(port, WHITEHEAT_SET_RTS,
+			(__u8 *)&rts_command, sizeof(rts_command));
+}
+
+
+static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff)
+{
+	struct whiteheat_set_rdb dtr_command;
+
+	dtr_command.port = port->port_number + 1;
+	dtr_command.state = onoff;
+	return firm_send_command(port, WHITEHEAT_SET_DTR,
+			(__u8 *)&dtr_command, sizeof(dtr_command));
+}
+
+
+static int firm_set_break(struct usb_serial_port *port, __u8 onoff)
+{
+	struct whiteheat_set_rdb break_command;
+
+	break_command.port = port->port_number + 1;
+	break_command.state = onoff;
+	return firm_send_command(port, WHITEHEAT_SET_BREAK,
+			(__u8 *)&break_command, sizeof(break_command));
+}
+
+
+static int firm_purge(struct usb_serial_port *port, __u8 rxtx)
+{
+	struct whiteheat_purge purge_command;
+
+	purge_command.port = port->port_number + 1;
+	purge_command.what = rxtx;
+	return firm_send_command(port, WHITEHEAT_PURGE,
+			(__u8 *)&purge_command, sizeof(purge_command));
+}
+
+
+static int firm_get_dtr_rts(struct usb_serial_port *port)
+{
+	struct whiteheat_simple get_dr_command;
+
+	get_dr_command.port = port->port_number + 1;
+	return firm_send_command(port, WHITEHEAT_GET_DTR_RTS,
+			(__u8 *)&get_dr_command, sizeof(get_dr_command));
+}
+
+
+static int firm_report_tx_done(struct usb_serial_port *port)
+{
+	struct whiteheat_simple close_command;
+
+	close_command.port = port->port_number + 1;
+	return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE,
+			(__u8 *)&close_command, sizeof(close_command));
+}
+
+
+/*****************************************************************************
+ * Connect Tech's White Heat utility functions
+ *****************************************************************************/
+static int start_command_port(struct usb_serial *serial)
+{
+	struct usb_serial_port *command_port;
+	struct whiteheat_command_private *command_info;
+	int retval = 0;
+
+	command_port = serial->port[COMMAND_PORT];
+	command_info = usb_get_serial_port_data(command_port);
+	mutex_lock(&command_info->mutex);
+	if (!command_info->port_running) {
+		/* Work around HCD bugs */
+		usb_clear_halt(serial->dev, command_port->read_urb->pipe);
+
+		retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
+		if (retval) {
+			dev_err(&serial->dev->dev,
+				"%s - failed submitting read urb, error %d\n",
+				__func__, retval);
+			goto exit;
+		}
+	}
+	command_info->port_running++;
+
+exit:
+	mutex_unlock(&command_info->mutex);
+	return retval;
+}
+
+
+static void stop_command_port(struct usb_serial *serial)
+{
+	struct usb_serial_port *command_port;
+	struct whiteheat_command_private *command_info;
+
+	command_port = serial->port[COMMAND_PORT];
+	command_info = usb_get_serial_port_data(command_port);
+	mutex_lock(&command_info->mutex);
+	command_info->port_running--;
+	if (!command_info->port_running)
+		usb_kill_urb(command_port->read_urb);
+	mutex_unlock(&command_info->mutex);
+}
+
+module_usb_serial_driver(serial_drivers, id_table_combined);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+MODULE_FIRMWARE("whiteheat.fw");
+MODULE_FIRMWARE("whiteheat_loader.fw");
diff --git a/drivers/usb/serial/whiteheat.h b/drivers/usb/serial/whiteheat.h
new file mode 100644
index 000000000..7e63074c9
--- /dev/null
+++ b/drivers/usb/serial/whiteheat.h
@@ -0,0 +1,298 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * USB ConnectTech WhiteHEAT driver
+ *
+ *      Copyright (C) 2002
+ *          Connect Tech Inc.
+ *
+ *      Copyright (C) 1999, 2000
+ *          Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ *
+ */
+
+#ifndef __LINUX_USB_SERIAL_WHITEHEAT_H
+#define __LINUX_USB_SERIAL_WHITEHEAT_H
+
+
+/* WhiteHEAT commands */
+#define WHITEHEAT_OPEN			1	/* open the port */
+#define WHITEHEAT_CLOSE			2	/* close the port */
+#define WHITEHEAT_SETUP_PORT		3	/* change port settings */
+#define WHITEHEAT_SET_RTS		4	/* turn RTS on or off */
+#define WHITEHEAT_SET_DTR		5	/* turn DTR on or off */
+#define WHITEHEAT_SET_BREAK		6	/* turn BREAK on or off */
+#define WHITEHEAT_DUMP			7	/* dump memory */
+#define WHITEHEAT_STATUS		8	/* get status */
+#define WHITEHEAT_PURGE			9	/* clear the UART fifos */
+#define WHITEHEAT_GET_DTR_RTS		10	/* get the state of DTR and RTS
+							for a port */
+#define WHITEHEAT_GET_HW_INFO		11	/* get EEPROM info and
+							hardware ID */
+#define WHITEHEAT_REPORT_TX_DONE	12	/* get the next TX done */
+#define WHITEHEAT_EVENT			13	/* unsolicited status events */
+#define WHITEHEAT_ECHO			14	/* send data to the indicated
+						   IN endpoint */
+#define WHITEHEAT_DO_TEST		15	/* perform specified test */
+#define WHITEHEAT_CMD_COMPLETE		16	/* reply for some commands */
+#define WHITEHEAT_CMD_FAILURE		17	/* reply for failed commands */
+
+
+/*
+ * Commands to the firmware
+ */
+
+
+/*
+ * WHITEHEAT_OPEN
+ * WHITEHEAT_CLOSE
+ * WHITEHEAT_STATUS
+ * WHITEHEAT_GET_DTR_RTS
+ * WHITEHEAT_REPORT_TX_DONE
+*/
+struct whiteheat_simple {
+	__u8	port;	/* port number (1 to N) */
+};
+
+
+/*
+ * WHITEHEAT_SETUP_PORT
+ */
+#define WHITEHEAT_PAR_NONE	'n'	/* no parity */
+#define WHITEHEAT_PAR_EVEN	'e'	/* even parity */
+#define WHITEHEAT_PAR_ODD	'o'	/* odd parity */
+#define WHITEHEAT_PAR_SPACE	'0'	/* space (force 0) parity */
+#define WHITEHEAT_PAR_MARK	'1'	/* mark (force 1) parity */
+
+#define WHITEHEAT_SFLOW_NONE	'n'	/* no software flow control */
+#define WHITEHEAT_SFLOW_RX	'r'	/* XOFF/ON is sent when RX
+					   fills/empties */
+#define WHITEHEAT_SFLOW_TX	't'	/* when received XOFF/ON will
+					   stop/start TX */
+#define WHITEHEAT_SFLOW_RXTX	'b'	/* both SFLOW_RX and SFLOW_TX */
+
+#define WHITEHEAT_HFLOW_NONE		0x00	/* no hardware flow control */
+#define WHITEHEAT_HFLOW_RTS_TOGGLE	0x01	/* RTS is on during transmit,
+						   off otherwise */
+#define WHITEHEAT_HFLOW_DTR		0x02	/* DTR is off/on when RX
+						   fills/empties */
+#define WHITEHEAT_HFLOW_CTS		0x08	/* when received CTS off/on
+						   will stop/start TX */
+#define WHITEHEAT_HFLOW_DSR		0x10	/* when received DSR off/on
+						   will stop/start TX */
+#define WHITEHEAT_HFLOW_RTS		0x80	/* RTS is off/on when RX
+						   fills/empties */
+
+struct whiteheat_port_settings {
+	__u8	port;		/* port number (1 to N) */
+	__le32	baud;		/* any value 7 - 460800, firmware calculates
+				   best fit; arrives little endian */
+	__u8	bits;		/* 5, 6, 7, or 8 */
+	__u8	stop;		/* 1 or 2, default 1 (2 = 1.5 if bits = 5) */
+	__u8	parity;		/* see WHITEHEAT_PAR_* above */
+	__u8	sflow;		/* see WHITEHEAT_SFLOW_* above */
+	__u8	xoff;		/* XOFF byte value */
+	__u8	xon;		/* XON byte value */
+	__u8	hflow;		/* see WHITEHEAT_HFLOW_* above */
+	__u8	lloop;		/* 0/1 turns local loopback mode off/on */
+} __attribute__ ((packed));
+
+
+/*
+ * WHITEHEAT_SET_RTS
+ * WHITEHEAT_SET_DTR
+ * WHITEHEAT_SET_BREAK
+ */
+#define WHITEHEAT_RTS_OFF	0x00
+#define WHITEHEAT_RTS_ON	0x01
+#define WHITEHEAT_DTR_OFF	0x00
+#define WHITEHEAT_DTR_ON	0x01
+#define WHITEHEAT_BREAK_OFF	0x00
+#define WHITEHEAT_BREAK_ON	0x01
+
+struct whiteheat_set_rdb {
+	__u8	port;		/* port number (1 to N) */
+	__u8	state;		/* 0/1 turns signal off/on */
+};
+
+
+/*
+ * WHITEHEAT_DUMP
+ */
+#define WHITEHEAT_DUMP_MEM_DATA		'd'  /* data */
+#define WHITEHEAT_DUMP_MEM_IDATA	'i'  /* idata */
+#define WHITEHEAT_DUMP_MEM_BDATA	'b'  /* bdata */
+#define WHITEHEAT_DUMP_MEM_XDATA	'x'  /* xdata */
+
+/*
+ * Allowable address ranges (firmware checks address):
+ * Type DATA:  0x00 - 0xff
+ * Type IDATA: 0x80 - 0xff
+ * Type BDATA: 0x20 - 0x2f
+ * Type XDATA: 0x0000 - 0xffff
+ *
+ * B/I/DATA all read the local memory space
+ * XDATA reads the external memory space
+ * BDATA returns bits as bytes
+ *
+ * NOTE: 0x80 - 0xff (local space) are the Special Function Registers
+ *       of the 8051, and some have on-read side-effects.
+ */
+
+struct whiteheat_dump {
+	__u8	mem_type;	/* see WHITEHEAT_DUMP_* above */
+	__u16	addr;		/* address, see restrictions above */
+	__u16	length;		/* number of bytes to dump, max 63 bytes */
+};
+
+
+/*
+ * WHITEHEAT_PURGE
+ */
+#define WHITEHEAT_PURGE_RX	0x01	/* purge rx fifos */
+#define WHITEHEAT_PURGE_TX	0x02	/* purge tx fifos */
+
+struct whiteheat_purge {
+	__u8	port;		/* port number (1 to N) */
+	__u8	what;		/* bit pattern of what to purge */
+};
+
+
+/*
+ * WHITEHEAT_ECHO
+ */
+struct whiteheat_echo {
+	__u8	port;		/* port number (1 to N) */
+	__u8	length;		/* length of message to echo, max 61 bytes */
+	__u8	echo_data[61];	/* data to echo */
+};
+
+
+/*
+ * WHITEHEAT_DO_TEST
+ */
+#define WHITEHEAT_TEST_UART_RW		0x01  /* read/write uart registers */
+#define WHITEHEAT_TEST_UART_INTR	0x02  /* uart interrupt */
+#define WHITEHEAT_TEST_SETUP_CONT	0x03  /* setup for
+						PORT_CONT/PORT_DISCONT */
+#define WHITEHEAT_TEST_PORT_CONT	0x04  /* port connect */
+#define WHITEHEAT_TEST_PORT_DISCONT	0x05  /* port disconnect */
+#define WHITEHEAT_TEST_UART_CLK_START	0x06  /* uart clock test start */
+#define WHITEHEAT_TEST_UART_CLK_STOP	0x07  /* uart clock test stop */
+#define WHITEHEAT_TEST_MODEM_FT		0x08  /* modem signals, requires a
+						loopback cable/connector */
+#define WHITEHEAT_TEST_ERASE_EEPROM	0x09  /* erase eeprom */
+#define WHITEHEAT_TEST_READ_EEPROM	0x0a  /* read eeprom */
+#define WHITEHEAT_TEST_PROGRAM_EEPROM	0x0b  /* program eeprom */
+
+struct whiteheat_test {
+	__u8	port;		/* port number (1 to n) */
+	__u8	test;		/* see WHITEHEAT_TEST_* above*/
+	__u8	info[32];	/* additional info */
+};
+
+
+/*
+ * Replies from the firmware
+ */
+
+
+/*
+ * WHITEHEAT_STATUS
+ */
+#define WHITEHEAT_EVENT_MODEM		0x01	/* modem field is valid */
+#define WHITEHEAT_EVENT_ERROR		0x02	/* error field is valid */
+#define WHITEHEAT_EVENT_FLOW		0x04	/* flow field is valid */
+#define WHITEHEAT_EVENT_CONNECT		0x08	/* connect field is valid */
+
+#define WHITEHEAT_FLOW_NONE		0x00	/* no flow control active */
+#define WHITEHEAT_FLOW_HARD_OUT		0x01	/* TX is stopped by CTS
+						  (waiting for CTS to go on) */
+#define WHITEHEAT_FLOW_HARD_IN		0x02	/* remote TX is stopped
+						  by RTS */
+#define WHITEHEAT_FLOW_SOFT_OUT		0x04	/* TX is stopped by XOFF
+						  received (waiting for XON) */
+#define WHITEHEAT_FLOW_SOFT_IN		0x08	/* remote TX is stopped by XOFF
+						  transmitted */
+#define WHITEHEAT_FLOW_TX_DONE		0x80	/* TX has completed */
+
+struct whiteheat_status_info {
+	__u8	port;		/* port number (1 to N) */
+	__u8	event;		/* indicates what the current event is,
+					see WHITEHEAT_EVENT_* above */
+	__u8	modem;		/* modem signal status (copy of uart's
+					MSR register) */
+	__u8	error;		/* line status (copy of uart's LSR register) */
+	__u8	flow;		/* flow control state, see WHITEHEAT_FLOW_*
+					above */
+	__u8	connect;	/* 0 means not connected, non-zero means
+					connected */
+};
+
+
+/*
+ * WHITEHEAT_GET_DTR_RTS
+ */
+struct whiteheat_dr_info {
+	__u8	mcr;		/* copy of uart's MCR register */
+};
+
+
+/*
+ * WHITEHEAT_GET_HW_INFO
+ */
+struct whiteheat_hw_info {
+	__u8	hw_id;		/* hardware id number, WhiteHEAT = 0 */
+	__u8	sw_major_rev;	/* major version number */
+	__u8	sw_minor_rev;	/* minor version number */
+	struct whiteheat_hw_eeprom_info {
+		__u8	b0;			/* B0 */
+		__u8	vendor_id_low;		/* vendor id (low byte) */
+		__u8	vendor_id_high;		/* vendor id (high byte) */
+		__u8	product_id_low;		/* product id (low byte) */
+		__u8	product_id_high;	/* product id (high byte) */
+		__u8	device_id_low;		/* device id (low byte) */
+		__u8	device_id_high;		/* device id (high byte) */
+		__u8	not_used_1;
+		__u8	serial_number_0;	/* serial number (low byte) */
+		__u8	serial_number_1;	/* serial number */
+		__u8	serial_number_2;	/* serial number */
+		__u8	serial_number_3;	/* serial number (high byte) */
+		__u8	not_used_2;
+		__u8	not_used_3;
+		__u8	checksum_low;		/* checksum (low byte) */
+		__u8	checksum_high;		/* checksum (high byte */
+	} hw_eeprom_info;	/* EEPROM contents */
+};
+
+
+/*
+ * WHITEHEAT_EVENT
+ */
+struct whiteheat_event_info {
+	__u8	port;		/* port number (1 to N) */
+	__u8	event;		/* see whiteheat_status_info.event */
+	__u8	info;		/* see whiteheat_status_info.modem, .error,
+					.flow, .connect */
+};
+
+
+/*
+ * WHITEHEAT_DO_TEST
+ */
+#define WHITEHEAT_TEST_FAIL	0x00  /* test failed */
+#define WHITEHEAT_TEST_UNKNOWN	0x01  /* unknown test requested */
+#define WHITEHEAT_TEST_PASS	0xff  /* test passed */
+
+struct whiteheat_test_info {
+	__u8	port;		/* port number (1 to N) */
+	__u8	test;		/* indicates which test this is a response for,
+				   see WHITEHEAT_DO_TEST above */
+	__u8	status;		/* see WHITEHEAT_TEST_* above */
+	__u8	results[32];	/* test-dependent results */
+};
+
+
+#endif
diff --git a/drivers/usb/serial/wishbone-serial.c b/drivers/usb/serial/wishbone-serial.c
new file mode 100644
index 000000000..ff4092f9b
--- /dev/null
+++ b/drivers/usb/serial/wishbone-serial.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * USB Wishbone-Serial adapter driver
+ *
+ * Copyright (C) 2013 Wesley W. Terpstra <w.terpstra@gsi.de>
+ * Copyright (C) 2013 GSI Helmholtz Centre for Heavy Ion Research GmbH
+ */
+
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+#define GSI_VENDOR_OPENCLOSE 0xB0
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1D50, 0x6062, 0xFF, 0xFF, 0xFF) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/*
+ * Etherbone must be told that a new stream has begun before data arrives.
+ * This is necessary to restart the negotiation of Wishbone bus parameters.
+ * Similarly, when the stream ends, Etherbone must be told so that the cycle
+ * line can be driven low in the case that userspace failed to do so.
+ */
+static int usb_gsi_openclose(struct usb_serial_port *port, int value)
+{
+	struct usb_device *dev = port->serial->dev;
+
+	return usb_control_msg(
+		dev,
+		usb_sndctrlpipe(dev, 0), /* Send to EP0OUT */
+		GSI_VENDOR_OPENCLOSE,
+		USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+		value, /* wValue = device is open(1) or closed(0) */
+		port->serial->interface->cur_altsetting->desc.bInterfaceNumber,
+		NULL, 0,  /* There is no data stage */
+		5000); /* Timeout till operation fails */
+}
+
+static int wishbone_serial_open(struct tty_struct *tty,
+				struct usb_serial_port *port)
+{
+	int retval;
+
+	retval = usb_gsi_openclose(port, 1);
+	if (retval) {
+		dev_err(&port->serial->dev->dev,
+		       "Could not mark device as open (%d)\n",
+		       retval);
+		return retval;
+	}
+
+	retval = usb_serial_generic_open(tty, port);
+	if (retval)
+		usb_gsi_openclose(port, 0);
+
+	return retval;
+}
+
+static void wishbone_serial_close(struct usb_serial_port *port)
+{
+	usb_serial_generic_close(port);
+	usb_gsi_openclose(port, 0);
+}
+
+static struct usb_serial_driver wishbone_serial_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"wishbone_serial",
+	},
+	.id_table =		id_table,
+	.num_ports =		1,
+	.open =			&wishbone_serial_open,
+	.close =		&wishbone_serial_close,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&wishbone_serial_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR("Wesley W. Terpstra <w.terpstra@gsi.de>");
+MODULE_DESCRIPTION("USB Wishbone-Serial adapter");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c
new file mode 100644
index 000000000..f3811e060
--- /dev/null
+++ b/drivers/usb/serial/xr_serial.c
@@ -0,0 +1,1026 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * MaxLinear/Exar USB to Serial driver
+ *
+ * Copyright (c) 2020 Manivannan Sadhasivam <mani@kernel.org>
+ * Copyright (c) 2021 Johan Hovold <johan@kernel.org>
+ *
+ * Based on the initial driver written by Patong Yang:
+ *
+ *   https://lore.kernel.org/r/20180404070634.nhspvmxcjwfgjkcv@advantechmxl-desktop
+ *
+ *   Copyright (c) 2018 Patong Yang <patong.mxl@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/serial.h>
+
+struct xr_txrx_clk_mask {
+	u16 tx;
+	u16 rx0;
+	u16 rx1;
+};
+
+#define XR_INT_OSC_HZ			48000000U
+#define XR21V141X_MIN_SPEED		46U
+#define XR21V141X_MAX_SPEED		XR_INT_OSC_HZ
+
+/* XR21V141X register blocks */
+#define XR21V141X_UART_REG_BLOCK	0
+#define XR21V141X_UM_REG_BLOCK		4
+#define XR21V141X_UART_CUSTOM_BLOCK	0x66
+
+/* XR21V141X UART registers */
+#define XR21V141X_CLOCK_DIVISOR_0	0x04
+#define XR21V141X_CLOCK_DIVISOR_1	0x05
+#define XR21V141X_CLOCK_DIVISOR_2	0x06
+#define XR21V141X_TX_CLOCK_MASK_0	0x07
+#define XR21V141X_TX_CLOCK_MASK_1	0x08
+#define XR21V141X_RX_CLOCK_MASK_0	0x09
+#define XR21V141X_RX_CLOCK_MASK_1	0x0a
+#define XR21V141X_REG_FORMAT		0x0b
+
+/* XR21V141X UART Manager registers */
+#define XR21V141X_UM_FIFO_ENABLE_REG	0x10
+#define XR21V141X_UM_ENABLE_TX_FIFO	0x01
+#define XR21V141X_UM_ENABLE_RX_FIFO	0x02
+
+#define XR21V141X_UM_RX_FIFO_RESET	0x18
+#define XR21V141X_UM_TX_FIFO_RESET	0x1c
+
+#define XR_UART_ENABLE_TX		0x1
+#define XR_UART_ENABLE_RX		0x2
+
+#define XR_GPIO_RI			BIT(0)
+#define XR_GPIO_CD			BIT(1)
+#define XR_GPIO_DSR			BIT(2)
+#define XR_GPIO_DTR			BIT(3)
+#define XR_GPIO_CTS			BIT(4)
+#define XR_GPIO_RTS			BIT(5)
+#define XR_GPIO_CLK			BIT(6)
+#define XR_GPIO_XEN			BIT(7)
+#define XR_GPIO_TXT			BIT(8)
+#define XR_GPIO_RXT			BIT(9)
+
+#define XR_UART_DATA_MASK		GENMASK(3, 0)
+#define XR_UART_DATA_7			0x7
+#define XR_UART_DATA_8			0x8
+
+#define XR_UART_PARITY_MASK		GENMASK(6, 4)
+#define XR_UART_PARITY_SHIFT		4
+#define XR_UART_PARITY_NONE		(0x0 << XR_UART_PARITY_SHIFT)
+#define XR_UART_PARITY_ODD		(0x1 << XR_UART_PARITY_SHIFT)
+#define XR_UART_PARITY_EVEN		(0x2 <<	XR_UART_PARITY_SHIFT)
+#define XR_UART_PARITY_MARK		(0x3 << XR_UART_PARITY_SHIFT)
+#define XR_UART_PARITY_SPACE		(0x4 << XR_UART_PARITY_SHIFT)
+
+#define XR_UART_STOP_MASK		BIT(7)
+#define XR_UART_STOP_SHIFT		7
+#define XR_UART_STOP_1			(0x0 << XR_UART_STOP_SHIFT)
+#define XR_UART_STOP_2			(0x1 << XR_UART_STOP_SHIFT)
+
+#define XR_UART_FLOW_MODE_NONE		0x0
+#define XR_UART_FLOW_MODE_HW		0x1
+#define XR_UART_FLOW_MODE_SW		0x2
+
+#define XR_GPIO_MODE_SEL_MASK		GENMASK(2, 0)
+#define XR_GPIO_MODE_SEL_RTS_CTS	0x1
+#define XR_GPIO_MODE_SEL_DTR_DSR	0x2
+#define XR_GPIO_MODE_SEL_RS485		0x3
+#define XR_GPIO_MODE_SEL_RS485_ADDR	0x4
+#define XR_GPIO_MODE_TX_TOGGLE		0x100
+#define XR_GPIO_MODE_RX_TOGGLE		0x200
+
+#define XR_FIFO_RESET			0x1
+
+#define XR_CUSTOM_DRIVER_ACTIVE		0x1
+
+static int xr21v141x_uart_enable(struct usb_serial_port *port);
+static int xr21v141x_uart_disable(struct usb_serial_port *port);
+static int xr21v141x_fifo_reset(struct usb_serial_port *port);
+static void xr21v141x_set_line_settings(struct tty_struct *tty,
+					struct usb_serial_port *port,
+					const struct ktermios *old_termios);
+
+struct xr_type {
+	int reg_width;
+	u8 reg_recipient;
+	u8 set_reg;
+	u8 get_reg;
+
+	u16 uart_enable;
+	u16 flow_control;
+	u16 xon_char;
+	u16 xoff_char;
+	u16 tx_break;
+	u16 gpio_mode;
+	u16 gpio_direction;
+	u16 gpio_set;
+	u16 gpio_clear;
+	u16 gpio_status;
+	u16 tx_fifo_reset;
+	u16 rx_fifo_reset;
+	u16 custom_driver;
+
+	bool have_5_6_bit_mode;
+	bool have_xmit_toggle;
+
+	int (*enable)(struct usb_serial_port *port);
+	int (*disable)(struct usb_serial_port *port);
+	int (*fifo_reset)(struct usb_serial_port *port);
+	void (*set_line_settings)(struct tty_struct *tty,
+				  struct usb_serial_port *port,
+				  const struct ktermios *old_termios);
+};
+
+enum xr_type_id {
+	XR21V141X,
+	XR21B142X,
+	XR21B1411,
+	XR2280X,
+	XR_TYPE_COUNT,
+};
+
+static const struct xr_type xr_types[] = {
+	[XR21V141X] = {
+		.reg_width	= 8,
+		.reg_recipient	= USB_RECIP_DEVICE,
+		.set_reg	= 0x00,
+		.get_reg	= 0x01,
+
+		.uart_enable	= 0x03,
+		.flow_control	= 0x0c,
+		.xon_char	= 0x10,
+		.xoff_char	= 0x11,
+		.tx_break	= 0x14,
+		.gpio_mode	= 0x1a,
+		.gpio_direction	= 0x1b,
+		.gpio_set	= 0x1d,
+		.gpio_clear	= 0x1e,
+		.gpio_status	= 0x1f,
+
+		.enable			= xr21v141x_uart_enable,
+		.disable		= xr21v141x_uart_disable,
+		.fifo_reset		= xr21v141x_fifo_reset,
+		.set_line_settings	= xr21v141x_set_line_settings,
+	},
+	[XR21B142X] = {
+		.reg_width	= 16,
+		.reg_recipient	= USB_RECIP_INTERFACE,
+		.set_reg	= 0x00,
+		.get_reg	= 0x00,
+
+		.uart_enable	= 0x00,
+		.flow_control	= 0x06,
+		.xon_char	= 0x07,
+		.xoff_char	= 0x08,
+		.tx_break	= 0x0a,
+		.gpio_mode	= 0x0c,
+		.gpio_direction	= 0x0d,
+		.gpio_set	= 0x0e,
+		.gpio_clear	= 0x0f,
+		.gpio_status	= 0x10,
+		.tx_fifo_reset	= 0x40,
+		.rx_fifo_reset	= 0x43,
+		.custom_driver	= 0x60,
+
+		.have_5_6_bit_mode	= true,
+		.have_xmit_toggle	= true,
+	},
+	[XR21B1411] = {
+		.reg_width	= 12,
+		.reg_recipient	= USB_RECIP_DEVICE,
+		.set_reg	= 0x00,
+		.get_reg	= 0x01,
+
+		.uart_enable	= 0xc00,
+		.flow_control	= 0xc06,
+		.xon_char	= 0xc07,
+		.xoff_char	= 0xc08,
+		.tx_break	= 0xc0a,
+		.gpio_mode	= 0xc0c,
+		.gpio_direction	= 0xc0d,
+		.gpio_set	= 0xc0e,
+		.gpio_clear	= 0xc0f,
+		.gpio_status	= 0xc10,
+		.tx_fifo_reset	= 0xc80,
+		.rx_fifo_reset	= 0xcc0,
+		.custom_driver	= 0x20d,
+	},
+	[XR2280X] = {
+		.reg_width	= 16,
+		.reg_recipient	= USB_RECIP_DEVICE,
+		.set_reg	= 0x05,
+		.get_reg	= 0x05,
+
+		.uart_enable	= 0x40,
+		.flow_control	= 0x46,
+		.xon_char	= 0x47,
+		.xoff_char	= 0x48,
+		.tx_break	= 0x4a,
+		.gpio_mode	= 0x4c,
+		.gpio_direction	= 0x4d,
+		.gpio_set	= 0x4e,
+		.gpio_clear	= 0x4f,
+		.gpio_status	= 0x50,
+		.tx_fifo_reset	= 0x60,
+		.rx_fifo_reset	= 0x63,
+		.custom_driver	= 0x81,
+	},
+};
+
+struct xr_data {
+	const struct xr_type *type;
+	u8 channel;			/* zero-based index or interface number */
+};
+
+static int xr_set_reg(struct usb_serial_port *port, u8 channel, u16 reg, u16 val)
+{
+	struct xr_data *data = usb_get_serial_port_data(port);
+	const struct xr_type *type = data->type;
+	struct usb_serial *serial = port->serial;
+	int ret;
+
+	ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			type->set_reg,
+			USB_DIR_OUT | USB_TYPE_VENDOR | type->reg_recipient,
+			val, (channel << 8) | reg, NULL, 0,
+			USB_CTRL_SET_TIMEOUT);
+	if (ret < 0) {
+		dev_err(&port->dev, "Failed to set reg 0x%02x: %d\n", reg, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int xr_get_reg(struct usb_serial_port *port, u8 channel, u16 reg, u16 *val)
+{
+	struct xr_data *data = usb_get_serial_port_data(port);
+	const struct xr_type *type = data->type;
+	struct usb_serial *serial = port->serial;
+	u8 *dmabuf;
+	int ret, len;
+
+	if (type->reg_width == 8)
+		len = 1;
+	else
+		len = 2;
+
+	dmabuf = kmalloc(len, GFP_KERNEL);
+	if (!dmabuf)
+		return -ENOMEM;
+
+	ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+			type->get_reg,
+			USB_DIR_IN | USB_TYPE_VENDOR | type->reg_recipient,
+			0, (channel << 8) | reg, dmabuf, len,
+			USB_CTRL_GET_TIMEOUT);
+	if (ret == len) {
+		if (len == 2)
+			*val = le16_to_cpup((__le16 *)dmabuf);
+		else
+			*val = *dmabuf;
+		ret = 0;
+	} else {
+		dev_err(&port->dev, "Failed to get reg 0x%02x: %d\n", reg, ret);
+		if (ret >= 0)
+			ret = -EIO;
+	}
+
+	kfree(dmabuf);
+
+	return ret;
+}
+
+static int xr_set_reg_uart(struct usb_serial_port *port, u16 reg, u16 val)
+{
+	struct xr_data *data = usb_get_serial_port_data(port);
+
+	return xr_set_reg(port, data->channel, reg, val);
+}
+
+static int xr_get_reg_uart(struct usb_serial_port *port, u16 reg, u16 *val)
+{
+	struct xr_data *data = usb_get_serial_port_data(port);
+
+	return xr_get_reg(port, data->channel, reg, val);
+}
+
+static int xr_set_reg_um(struct usb_serial_port *port, u8 reg_base, u8 val)
+{
+	struct xr_data *data = usb_get_serial_port_data(port);
+	u8 reg;
+
+	reg = reg_base + data->channel;
+
+	return xr_set_reg(port, XR21V141X_UM_REG_BLOCK, reg, val);
+}
+
+static int __xr_uart_enable(struct usb_serial_port *port)
+{
+	struct xr_data *data = usb_get_serial_port_data(port);
+
+	return xr_set_reg_uart(port, data->type->uart_enable,
+			XR_UART_ENABLE_TX | XR_UART_ENABLE_RX);
+}
+
+static int __xr_uart_disable(struct usb_serial_port *port)
+{
+	struct xr_data *data = usb_get_serial_port_data(port);
+
+	return xr_set_reg_uart(port, data->type->uart_enable, 0);
+}
+
+/*
+ * According to datasheet, below is the recommended sequence for enabling UART
+ * module in XR21V141X:
+ *
+ * Enable Tx FIFO
+ * Enable Tx and Rx
+ * Enable Rx FIFO
+ */
+static int xr21v141x_uart_enable(struct usb_serial_port *port)
+{
+	int ret;
+
+	ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG,
+			    XR21V141X_UM_ENABLE_TX_FIFO);
+	if (ret)
+		return ret;
+
+	ret = __xr_uart_enable(port);
+	if (ret)
+		return ret;
+
+	ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG,
+			    XR21V141X_UM_ENABLE_TX_FIFO | XR21V141X_UM_ENABLE_RX_FIFO);
+	if (ret)
+		__xr_uart_disable(port);
+
+	return ret;
+}
+
+static int xr21v141x_uart_disable(struct usb_serial_port *port)
+{
+	int ret;
+
+	ret = __xr_uart_disable(port);
+	if (ret)
+		return ret;
+
+	ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG, 0);
+
+	return ret;
+}
+
+static int xr_uart_enable(struct usb_serial_port *port)
+{
+	struct xr_data *data = usb_get_serial_port_data(port);
+
+	if (data->type->enable)
+		return data->type->enable(port);
+
+	return __xr_uart_enable(port);
+}
+
+static int xr_uart_disable(struct usb_serial_port *port)
+{
+	struct xr_data *data = usb_get_serial_port_data(port);
+
+	if (data->type->disable)
+		return data->type->disable(port);
+
+	return __xr_uart_disable(port);
+}
+
+static int xr21v141x_fifo_reset(struct usb_serial_port *port)
+{
+	int ret;
+
+	ret = xr_set_reg_um(port, XR21V141X_UM_TX_FIFO_RESET, XR_FIFO_RESET);
+	if (ret)
+		return ret;
+
+	ret = xr_set_reg_um(port, XR21V141X_UM_RX_FIFO_RESET, XR_FIFO_RESET);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int xr_fifo_reset(struct usb_serial_port *port)
+{
+	struct xr_data *data = usb_get_serial_port_data(port);
+	int ret;
+
+	if (data->type->fifo_reset)
+		return data->type->fifo_reset(port);
+
+	ret = xr_set_reg_uart(port, data->type->tx_fifo_reset, XR_FIFO_RESET);
+	if (ret)
+		return ret;
+
+	ret = xr_set_reg_uart(port, data->type->rx_fifo_reset, XR_FIFO_RESET);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int xr_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct xr_data *data = usb_get_serial_port_data(port);
+	u16 status;
+	int ret;
+
+	ret = xr_get_reg_uart(port, data->type->gpio_status, &status);
+	if (ret)
+		return ret;
+
+	/*
+	 * Modem control pins are active low, so reading '0' means it is active
+	 * and '1' means not active.
+	 */
+	ret = ((status & XR_GPIO_DTR) ? 0 : TIOCM_DTR) |
+	      ((status & XR_GPIO_RTS) ? 0 : TIOCM_RTS) |
+	      ((status & XR_GPIO_CTS) ? 0 : TIOCM_CTS) |
+	      ((status & XR_GPIO_DSR) ? 0 : TIOCM_DSR) |
+	      ((status & XR_GPIO_RI) ? 0 : TIOCM_RI) |
+	      ((status & XR_GPIO_CD) ? 0 : TIOCM_CD);
+
+	return ret;
+}
+
+static int xr_tiocmset_port(struct usb_serial_port *port,
+			    unsigned int set, unsigned int clear)
+{
+	struct xr_data *data = usb_get_serial_port_data(port);
+	const struct xr_type *type = data->type;
+	u16 gpio_set = 0;
+	u16 gpio_clr = 0;
+	int ret = 0;
+
+	/* Modem control pins are active low, so set & clr are swapped */
+	if (set & TIOCM_RTS)
+		gpio_clr |= XR_GPIO_RTS;
+	if (set & TIOCM_DTR)
+		gpio_clr |= XR_GPIO_DTR;
+	if (clear & TIOCM_RTS)
+		gpio_set |= XR_GPIO_RTS;
+	if (clear & TIOCM_DTR)
+		gpio_set |= XR_GPIO_DTR;
+
+	/* Writing '0' to gpio_{set/clr} bits has no effect, so no need to do */
+	if (gpio_clr)
+		ret = xr_set_reg_uart(port, type->gpio_clear, gpio_clr);
+
+	if (gpio_set)
+		ret = xr_set_reg_uart(port, type->gpio_set, gpio_set);
+
+	return ret;
+}
+
+static int xr_tiocmset(struct tty_struct *tty,
+		       unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	return xr_tiocmset_port(port, set, clear);
+}
+
+static void xr_dtr_rts(struct usb_serial_port *port, int on)
+{
+	if (on)
+		xr_tiocmset_port(port, TIOCM_DTR | TIOCM_RTS, 0);
+	else
+		xr_tiocmset_port(port, 0, TIOCM_DTR | TIOCM_RTS);
+}
+
+static void xr_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct xr_data *data = usb_get_serial_port_data(port);
+	const struct xr_type *type = data->type;
+	u16 state;
+
+	if (break_state == 0)
+		state = 0;
+	else
+		state = GENMASK(type->reg_width - 1, 0);
+
+	dev_dbg(&port->dev, "Turning break %s\n", state == 0 ? "off" : "on");
+
+	xr_set_reg_uart(port, type->tx_break, state);
+}
+
+/* Tx and Rx clock mask values obtained from section 3.3.4 of datasheet */
+static const struct xr_txrx_clk_mask xr21v141x_txrx_clk_masks[] = {
+	{ 0x000, 0x000, 0x000 },
+	{ 0x000, 0x000, 0x000 },
+	{ 0x100, 0x000, 0x100 },
+	{ 0x020, 0x400, 0x020 },
+	{ 0x010, 0x100, 0x010 },
+	{ 0x208, 0x040, 0x208 },
+	{ 0x104, 0x820, 0x108 },
+	{ 0x844, 0x210, 0x884 },
+	{ 0x444, 0x110, 0x444 },
+	{ 0x122, 0x888, 0x224 },
+	{ 0x912, 0x448, 0x924 },
+	{ 0x492, 0x248, 0x492 },
+	{ 0x252, 0x928, 0x292 },
+	{ 0x94a, 0x4a4, 0xa52 },
+	{ 0x52a, 0xaa4, 0x54a },
+	{ 0xaaa, 0x954, 0x4aa },
+	{ 0xaaa, 0x554, 0xaaa },
+	{ 0x555, 0xad4, 0x5aa },
+	{ 0xb55, 0xab4, 0x55a },
+	{ 0x6b5, 0x5ac, 0xb56 },
+	{ 0x5b5, 0xd6c, 0x6d6 },
+	{ 0xb6d, 0xb6a, 0xdb6 },
+	{ 0x76d, 0x6da, 0xbb6 },
+	{ 0xedd, 0xdda, 0x76e },
+	{ 0xddd, 0xbba, 0xeee },
+	{ 0x7bb, 0xf7a, 0xdde },
+	{ 0xf7b, 0xef6, 0x7de },
+	{ 0xdf7, 0xbf6, 0xf7e },
+	{ 0x7f7, 0xfee, 0xefe },
+	{ 0xfdf, 0xfbe, 0x7fe },
+	{ 0xf7f, 0xefe, 0xffe },
+	{ 0xfff, 0xffe, 0xffd },
+};
+
+static int xr21v141x_set_baudrate(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	u32 divisor, baud, idx;
+	u16 tx_mask, rx_mask;
+	int ret;
+
+	baud = tty->termios.c_ospeed;
+	if (!baud)
+		return 0;
+
+	baud = clamp(baud, XR21V141X_MIN_SPEED, XR21V141X_MAX_SPEED);
+	divisor = XR_INT_OSC_HZ / baud;
+	idx = ((32 * XR_INT_OSC_HZ) / baud) & 0x1f;
+	tx_mask = xr21v141x_txrx_clk_masks[idx].tx;
+
+	if (divisor & 0x01)
+		rx_mask = xr21v141x_txrx_clk_masks[idx].rx1;
+	else
+		rx_mask = xr21v141x_txrx_clk_masks[idx].rx0;
+
+	dev_dbg(&port->dev, "Setting baud rate: %u\n", baud);
+	/*
+	 * XR21V141X uses fractional baud rate generator with 48MHz internal
+	 * oscillator and 19-bit programmable divisor. So theoretically it can
+	 * generate most commonly used baud rates with high accuracy.
+	 */
+	ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_0,
+			      divisor & 0xff);
+	if (ret)
+		return ret;
+
+	ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_1,
+			      (divisor >>  8) & 0xff);
+	if (ret)
+		return ret;
+
+	ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_2,
+			      (divisor >> 16) & 0xff);
+	if (ret)
+		return ret;
+
+	ret = xr_set_reg_uart(port, XR21V141X_TX_CLOCK_MASK_0,
+			      tx_mask & 0xff);
+	if (ret)
+		return ret;
+
+	ret = xr_set_reg_uart(port, XR21V141X_TX_CLOCK_MASK_1,
+			      (tx_mask >>  8) & 0xff);
+	if (ret)
+		return ret;
+
+	ret = xr_set_reg_uart(port, XR21V141X_RX_CLOCK_MASK_0,
+			      rx_mask & 0xff);
+	if (ret)
+		return ret;
+
+	ret = xr_set_reg_uart(port, XR21V141X_RX_CLOCK_MASK_1,
+			      (rx_mask >>  8) & 0xff);
+	if (ret)
+		return ret;
+
+	tty_encode_baud_rate(tty, baud, baud);
+
+	return 0;
+}
+
+static void xr_set_flow_mode(struct tty_struct *tty,
+		             struct usb_serial_port *port,
+		             const struct ktermios *old_termios)
+{
+	struct xr_data *data = usb_get_serial_port_data(port);
+	const struct xr_type *type = data->type;
+	u16 flow, gpio_mode;
+	int ret;
+
+	ret = xr_get_reg_uart(port, type->gpio_mode, &gpio_mode);
+	if (ret)
+		return;
+
+	/*
+	 * According to the datasheets, the UART needs to be disabled while
+	 * writing to the FLOW_CONTROL register (XR21V141X), or any register
+	 * but GPIO_SET, GPIO_CLEAR, TX_BREAK and ERROR_STATUS (XR21B142X).
+	 */
+	xr_uart_disable(port);
+
+	/* Set GPIO mode for controlling the pins manually by default. */
+	gpio_mode &= ~XR_GPIO_MODE_SEL_MASK;
+
+	if (C_CRTSCTS(tty) && C_BAUD(tty) != B0) {
+		dev_dbg(&port->dev, "Enabling hardware flow ctrl\n");
+		gpio_mode |= XR_GPIO_MODE_SEL_RTS_CTS;
+		flow = XR_UART_FLOW_MODE_HW;
+	} else if (I_IXON(tty)) {
+		u8 start_char = START_CHAR(tty);
+		u8 stop_char = STOP_CHAR(tty);
+
+		dev_dbg(&port->dev, "Enabling sw flow ctrl\n");
+		flow = XR_UART_FLOW_MODE_SW;
+
+		xr_set_reg_uart(port, type->xon_char, start_char);
+		xr_set_reg_uart(port, type->xoff_char, stop_char);
+	} else {
+		dev_dbg(&port->dev, "Disabling flow ctrl\n");
+		flow = XR_UART_FLOW_MODE_NONE;
+	}
+
+	xr_set_reg_uart(port, type->flow_control, flow);
+	xr_set_reg_uart(port, type->gpio_mode, gpio_mode);
+
+	xr_uart_enable(port);
+
+	if (C_BAUD(tty) == B0)
+		xr_dtr_rts(port, 0);
+	else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+		xr_dtr_rts(port, 1);
+}
+
+static void xr21v141x_set_line_settings(struct tty_struct *tty,
+				        struct usb_serial_port *port,
+				        const struct ktermios *old_termios)
+{
+	struct ktermios *termios = &tty->termios;
+	u8 bits = 0;
+	int ret;
+
+	if (!old_termios || (tty->termios.c_ospeed != old_termios->c_ospeed))
+		xr21v141x_set_baudrate(tty, port);
+
+	switch (C_CSIZE(tty)) {
+	case CS5:
+	case CS6:
+		/* CS5 and CS6 are not supported, so just restore old setting */
+		termios->c_cflag &= ~CSIZE;
+		if (old_termios)
+			termios->c_cflag |= old_termios->c_cflag & CSIZE;
+		else
+			termios->c_cflag |= CS8;
+
+		if (C_CSIZE(tty) == CS7)
+			bits |= XR_UART_DATA_7;
+		else
+			bits |= XR_UART_DATA_8;
+		break;
+	case CS7:
+		bits |= XR_UART_DATA_7;
+		break;
+	case CS8:
+	default:
+		bits |= XR_UART_DATA_8;
+		break;
+	}
+
+	if (C_PARENB(tty)) {
+		if (C_CMSPAR(tty)) {
+			if (C_PARODD(tty))
+				bits |= XR_UART_PARITY_MARK;
+			else
+				bits |= XR_UART_PARITY_SPACE;
+		} else {
+			if (C_PARODD(tty))
+				bits |= XR_UART_PARITY_ODD;
+			else
+				bits |= XR_UART_PARITY_EVEN;
+		}
+	}
+
+	if (C_CSTOPB(tty))
+		bits |= XR_UART_STOP_2;
+	else
+		bits |= XR_UART_STOP_1;
+
+	ret = xr_set_reg_uart(port, XR21V141X_REG_FORMAT, bits);
+	if (ret)
+		return;
+}
+
+static void xr_cdc_set_line_coding(struct tty_struct *tty,
+				   struct usb_serial_port *port,
+				   const struct ktermios *old_termios)
+{
+	struct xr_data *data = usb_get_serial_port_data(port);
+	struct usb_host_interface *alt = port->serial->interface->cur_altsetting;
+	struct usb_device *udev = port->serial->dev;
+	struct usb_cdc_line_coding *lc;
+	int ret;
+
+	lc = kzalloc(sizeof(*lc), GFP_KERNEL);
+	if (!lc)
+		return;
+
+	if (tty->termios.c_ospeed)
+		lc->dwDTERate = cpu_to_le32(tty->termios.c_ospeed);
+	else if (old_termios)
+		lc->dwDTERate = cpu_to_le32(old_termios->c_ospeed);
+	else
+		lc->dwDTERate = cpu_to_le32(9600);
+
+	if (C_CSTOPB(tty))
+		lc->bCharFormat = USB_CDC_2_STOP_BITS;
+	else
+		lc->bCharFormat = USB_CDC_1_STOP_BITS;
+
+	if (C_PARENB(tty)) {
+		if (C_CMSPAR(tty)) {
+			if (C_PARODD(tty))
+				lc->bParityType = USB_CDC_MARK_PARITY;
+			else
+				lc->bParityType = USB_CDC_SPACE_PARITY;
+		} else {
+			if (C_PARODD(tty))
+				lc->bParityType = USB_CDC_ODD_PARITY;
+			else
+				lc->bParityType = USB_CDC_EVEN_PARITY;
+		}
+	} else {
+		lc->bParityType = USB_CDC_NO_PARITY;
+	}
+
+	if (!data->type->have_5_6_bit_mode &&
+			(C_CSIZE(tty) == CS5 || C_CSIZE(tty) == CS6)) {
+		tty->termios.c_cflag &= ~CSIZE;
+		if (old_termios)
+			tty->termios.c_cflag |= old_termios->c_cflag & CSIZE;
+		else
+			tty->termios.c_cflag |= CS8;
+	}
+
+	switch (C_CSIZE(tty)) {
+	case CS5:
+		lc->bDataBits = 5;
+		break;
+	case CS6:
+		lc->bDataBits = 6;
+		break;
+	case CS7:
+		lc->bDataBits = 7;
+		break;
+	case CS8:
+	default:
+		lc->bDataBits = 8;
+		break;
+	}
+
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			USB_CDC_REQ_SET_LINE_CODING,
+			USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			0, alt->desc.bInterfaceNumber,
+			lc, sizeof(*lc), USB_CTRL_SET_TIMEOUT);
+	if (ret < 0)
+		dev_err(&port->dev, "Failed to set line coding: %d\n", ret);
+
+	kfree(lc);
+}
+
+static void xr_set_termios(struct tty_struct *tty,
+			   struct usb_serial_port *port,
+			   const struct ktermios *old_termios)
+{
+	struct xr_data *data = usb_get_serial_port_data(port);
+
+	/*
+	 * XR21V141X does not have a CUSTOM_DRIVER flag and always enters CDC
+	 * mode upon receiving CDC requests.
+	 */
+	if (data->type->set_line_settings)
+		data->type->set_line_settings(tty, port, old_termios);
+	else
+		xr_cdc_set_line_coding(tty, port, old_termios);
+
+	xr_set_flow_mode(tty, port, old_termios);
+}
+
+static int xr_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	int ret;
+
+	ret = xr_fifo_reset(port);
+	if (ret)
+		return ret;
+
+	ret = xr_uart_enable(port);
+	if (ret) {
+		dev_err(&port->dev, "Failed to enable UART\n");
+		return ret;
+	}
+
+	/* Setup termios */
+	if (tty)
+		xr_set_termios(tty, port, NULL);
+
+	ret = usb_serial_generic_open(tty, port);
+	if (ret) {
+		xr_uart_disable(port);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void xr_close(struct usb_serial_port *port)
+{
+	usb_serial_generic_close(port);
+
+	xr_uart_disable(port);
+}
+
+static int xr_probe(struct usb_serial *serial, const struct usb_device_id *id)
+{
+	struct usb_interface *control = serial->interface;
+	struct usb_host_interface *alt = control->cur_altsetting;
+	struct usb_cdc_parsed_header hdrs;
+	struct usb_cdc_union_desc *desc;
+	struct usb_interface *data;
+	int ret;
+
+	ret = cdc_parse_cdc_header(&hdrs, control, alt->extra, alt->extralen);
+	if (ret < 0)
+		return -ENODEV;
+
+	desc = hdrs.usb_cdc_union_desc;
+	if (!desc)
+		return -ENODEV;
+
+	data = usb_ifnum_to_if(serial->dev, desc->bSlaveInterface0);
+	if (!data)
+		return -ENODEV;
+
+	ret = usb_serial_claim_interface(serial, data);
+	if (ret)
+		return ret;
+
+	usb_set_serial_data(serial, (void *)id->driver_info);
+
+	return 0;
+}
+
+static int xr_gpio_init(struct usb_serial_port *port, const struct xr_type *type)
+{
+	u16 mask, mode;
+	int ret;
+
+	/*
+	 * Configure all pins as GPIO except for Receive and Transmit Toggle.
+	 */
+	mode = 0;
+	if (type->have_xmit_toggle)
+		mode |= XR_GPIO_MODE_RX_TOGGLE | XR_GPIO_MODE_TX_TOGGLE;
+
+	ret = xr_set_reg_uart(port, type->gpio_mode, mode);
+	if (ret)
+		return ret;
+
+	/*
+	 * Configure DTR and RTS as outputs and make sure they are deasserted
+	 * (active low), and configure RI, CD, DSR and CTS as inputs.
+	 */
+	mask = XR_GPIO_DTR | XR_GPIO_RTS;
+	ret = xr_set_reg_uart(port, type->gpio_direction, mask);
+	if (ret)
+		return ret;
+
+	ret = xr_set_reg_uart(port, type->gpio_set, mask);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int xr_port_probe(struct usb_serial_port *port)
+{
+	struct usb_interface_descriptor *desc;
+	const struct xr_type *type;
+	struct xr_data *data;
+	enum xr_type_id type_id;
+	int ret;
+
+	type_id = (int)(unsigned long)usb_get_serial_data(port->serial);
+	type = &xr_types[type_id];
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->type = type;
+
+	desc = &port->serial->interface->cur_altsetting->desc;
+	if (type_id == XR21V141X)
+		data->channel = desc->bInterfaceNumber / 2;
+	else
+		data->channel = desc->bInterfaceNumber;
+
+	usb_set_serial_port_data(port, data);
+
+	if (type->custom_driver) {
+		ret = xr_set_reg_uart(port, type->custom_driver,
+				XR_CUSTOM_DRIVER_ACTIVE);
+		if (ret)
+			goto err_free;
+	}
+
+	ret = xr_gpio_init(port, type);
+	if (ret)
+		goto err_free;
+
+	return 0;
+
+err_free:
+	kfree(data);
+
+	return ret;
+}
+
+static void xr_port_remove(struct usb_serial_port *port)
+{
+	struct xr_data *data = usb_get_serial_port_data(port);
+
+	kfree(data);
+}
+
+#define XR_DEVICE(vid, pid, type)					\
+	USB_DEVICE_INTERFACE_CLASS((vid), (pid), USB_CLASS_COMM),	\
+	.driver_info = (type)
+
+static const struct usb_device_id id_table[] = {
+	{ XR_DEVICE(0x04e2, 0x1400, XR2280X) },
+	{ XR_DEVICE(0x04e2, 0x1401, XR2280X) },
+	{ XR_DEVICE(0x04e2, 0x1402, XR2280X) },
+	{ XR_DEVICE(0x04e2, 0x1403, XR2280X) },
+	{ XR_DEVICE(0x04e2, 0x1410, XR21V141X) },
+	{ XR_DEVICE(0x04e2, 0x1411, XR21B1411) },
+	{ XR_DEVICE(0x04e2, 0x1412, XR21V141X) },
+	{ XR_DEVICE(0x04e2, 0x1414, XR21V141X) },
+	{ XR_DEVICE(0x04e2, 0x1420, XR21B142X) },
+	{ XR_DEVICE(0x04e2, 0x1422, XR21B142X) },
+	{ XR_DEVICE(0x04e2, 0x1424, XR21B142X) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_serial_driver xr_device = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name =	"xr_serial",
+	},
+	.id_table		= id_table,
+	.num_ports		= 1,
+	.probe			= xr_probe,
+	.port_probe		= xr_port_probe,
+	.port_remove		= xr_port_remove,
+	.open			= xr_open,
+	.close			= xr_close,
+	.break_ctl		= xr_break_ctl,
+	.set_termios		= xr_set_termios,
+	.tiocmget		= xr_tiocmget,
+	.tiocmset		= xr_tiocmset,
+	.dtr_rts		= xr_dtr_rts
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&xr_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR("Manivannan Sadhasivam <mani@kernel.org>");
+MODULE_DESCRIPTION("MaxLinear/Exar USB to Serial driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/xsens_mt.c b/drivers/usb/serial/xsens_mt.c
new file mode 100644
index 000000000..cf262c9a9
--- /dev/null
+++ b/drivers/usb/serial/xsens_mt.c
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xsens MT USB driver
+ *
+ * Copyright (C) 2013 Xsens <info@xsens.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+#define XSENS_VID 0x2639
+
+#define MTi_10_IMU_PID		0x0001
+#define MTi_20_VRU_PID		0x0002
+#define MTi_30_AHRS_PID		0x0003
+
+#define MTi_100_IMU_PID		0x0011
+#define MTi_200_VRU_PID		0x0012
+#define MTi_300_AHRS_PID	0x0013
+
+#define MTi_G_700_GPS_INS_PID	0x0017
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(XSENS_VID, MTi_10_IMU_PID) },
+	{ USB_DEVICE(XSENS_VID, MTi_20_VRU_PID) },
+	{ USB_DEVICE(XSENS_VID, MTi_30_AHRS_PID) },
+
+	{ USB_DEVICE(XSENS_VID, MTi_100_IMU_PID) },
+	{ USB_DEVICE(XSENS_VID, MTi_200_VRU_PID) },
+	{ USB_DEVICE(XSENS_VID, MTi_300_AHRS_PID) },
+
+	{ USB_DEVICE(XSENS_VID, MTi_G_700_GPS_INS_PID) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static int xsens_mt_probe(struct usb_serial *serial,
+					const struct usb_device_id *id)
+{
+	if (serial->interface->cur_altsetting->desc.bInterfaceNumber == 1)
+		return 0;
+
+	return -ENODEV;
+}
+
+static struct usb_serial_driver xsens_mt_device = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "xsens_mt",
+	},
+	.id_table = id_table,
+	.num_ports = 1,
+
+	.probe = xsens_mt_probe,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&xsens_mt_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR("Frans Klaver <frans.klaver@xsens.com>");
+MODULE_DESCRIPTION("USB-serial driver for Xsens motion trackers");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
new file mode 100644
index 000000000..d17b60a64
--- /dev/null
+++ b/drivers/usb/storage/Kconfig
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Storage driver configuration
+#
+
+comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
+comment "also be needed; see USB_STORAGE Help for more info"
+
+config USB_STORAGE
+	tristate "USB Mass Storage support"
+	depends on SCSI
+	help
+	  Say Y here if you want to connect USB mass storage devices to your
+	  computer's USB port. This is the driver you need for USB
+	  floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
+	  USB flash devices, and memory sticks, along with
+	  similar devices. This driver may also be used for some cameras
+	  and card readers.
+
+	  This option depends on 'SCSI' support being enabled, but you
+	  probably also need 'SCSI device support: SCSI disk support'
+	  (BLK_DEV_SD) for most USB storage devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usb-storage.
+
+if USB_STORAGE
+
+config USB_STORAGE_DEBUG
+	bool "USB Mass Storage verbose debug"
+	help
+	  Say Y here in order to have the USB Mass Storage code generate
+	  verbose debugging messages.
+
+config USB_STORAGE_REALTEK
+	tristate "Realtek Card Reader support"
+	help
+	  Say Y here to include additional code to support the power-saving function
+	  for Realtek RTS51xx USB card readers.
+
+	  If this driver is compiled as a module, it will be named ums-realtek.
+
+config REALTEK_AUTOPM
+	bool "Realtek Card Reader autosuspend support"
+	depends on USB_STORAGE_REALTEK && PM
+	default y
+
+config USB_STORAGE_DATAFAB
+	tristate "Datafab Compact Flash Reader support"
+	help
+	  Support for certain Datafab CompactFlash readers.
+	  Datafab has a web page at <http://www.datafab.com/>.
+
+	  If this driver is compiled as a module, it will be named ums-datafab.
+
+config USB_STORAGE_FREECOM
+	tristate "Freecom USB/ATAPI Bridge support"
+	help
+	  Support for the Freecom USB to IDE/ATAPI adaptor.
+	  Freecom has a web page at <https://www.freecom.de/>.
+
+	  If this driver is compiled as a module, it will be named ums-freecom.
+
+config USB_STORAGE_ISD200
+	tristate "ISD-200 USB/ATA Bridge support"
+	help
+	  Say Y here if you want to use USB Mass Store devices based
+	  on the In-Systems Design ISD-200 USB/ATA bridge.
+
+	  Some of the products that use this chip are:
+
+	  - Archos Jukebox 6000
+	  - ISD SmartCable for Storage
+	  - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
+	  - Sony CRX10U CD-R/RW drive
+	  - CyQ've CQ8060A CDRW drive
+	  - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
+
+	  If this driver is compiled as a module, it will be named ums-isd200.
+
+config USB_STORAGE_USBAT
+	tristate "USBAT/USBAT02-based storage support"
+	help
+	  Say Y here to include additional code to support storage devices
+	  based on the SCM/Shuttle USBAT/USBAT02 processors.
+
+	  Devices reported to work with this driver include:
+	  - CompactFlash reader included with Kodak DC3800 camera
+	  - Dane-Elec Zmate CompactFlash reader
+	  - Delkin Efilm reader2
+	  - HP 8200e/8210e/8230e CD-Writer Plus drives
+	  - I-JAM JS-50U
+	  - Jessops CompactFlash JESDCFRU BLACK
+	  - Kingston Technology PCREAD-USB/CF
+	  - Maxell UA4 CompactFlash reader
+	  - Memorex UCF-100
+	  - Microtech ZiO! ICS-45 CF2
+	  - RCA LYRA MP3 portable
+	  - Sandisk ImageMate SDDR-05b
+
+	  If this driver is compiled as a module, it will be named ums-usbat.
+
+config USB_STORAGE_SDDR09
+	tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
+	help
+	  Say Y here to include additional code to support the Sandisk SDDR-09
+	  SmartMedia reader in the USB Mass Storage driver.
+	  Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
+
+	  If this driver is compiled as a module, it will be named ums-sddr09.
+
+config USB_STORAGE_SDDR55
+	tristate "SanDisk SDDR-55 SmartMedia support"
+	help
+	  Say Y here to include additional code to support the Sandisk SDDR-55
+	  SmartMedia reader in the USB Mass Storage driver.
+
+	  If this driver is compiled as a module, it will be named ums-sddr55.
+
+config USB_STORAGE_JUMPSHOT
+	tristate "Lexar Jumpshot Compact Flash Reader"
+	help
+	  Say Y here to include additional code to support the Lexar Jumpshot
+	  USB CompactFlash reader.
+
+	  If this driver is compiled as a module, it will be named ums-jumpshot.
+
+config USB_STORAGE_ALAUDA
+	tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
+	help
+	  Say Y here to include additional code to support the Olympus MAUSB-10
+	  and Fujifilm DPC-R1 USB Card reader/writer devices.
+
+	  These devices are based on the Alauda chip and support both
+	  XD and SmartMedia cards.
+
+	  If this driver is compiled as a module, it will be named ums-alauda.
+
+config USB_STORAGE_ONETOUCH
+	tristate "Support OneTouch Button on Maxtor Hard Drives"
+	depends on INPUT=y || INPUT=USB_STORAGE
+	help
+	  Say Y here to include additional code to support the Maxtor OneTouch
+	  USB hard drive's onetouch button.
+
+	  This code registers the button on the front of Maxtor OneTouch USB
+	  hard drive's as an input device. An action can be associated with
+	  this input in any keybinding software. (e.g. gnome's keyboard short-
+	  cuts)
+
+	  If this driver is compiled as a module, it will be named ums-onetouch.
+
+config USB_STORAGE_KARMA
+	tristate "Support for Rio Karma music player"
+	help
+	  Say Y here to include additional code to support the Rio Karma
+	  USB interface.
+
+	  This code places the Rio Karma into mass storage mode, enabling
+	  it to be mounted as an ordinary filesystem. Performing an eject
+	  on the resulting scsi device node returns the Karma to normal
+	  operation.
+
+	  If this driver is compiled as a module, it will be named ums-karma.
+
+config USB_STORAGE_CYPRESS_ATACB
+	tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
+	help
+	  Say Y here if you want to use SAT (ata pass through) on devices based
+	  on the Cypress USB/ATA bridge supporting ATACB. This will allow you
+	  to use tools to tune and monitor your drive (like hdparm or smartctl).
+
+	  If you say no here your device will still work with the standard usb
+	  mass storage class.
+
+	  If this driver is compiled as a module, it will be named ums-cypress.
+
+config USB_STORAGE_ENE_UB6250
+	tristate "USB ENE card reader support"
+	help
+	  Say Y here if you wish to control a ENE SD/MS Card reader.
+	  Note that this driver does not support SM cards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ums-eneub6250.
+
+endif # USB_STORAGE
+
+config USB_UAS
+	tristate "USB Attached SCSI"
+	depends on SCSI && USB_STORAGE
+	help
+	  The USB Attached SCSI protocol is supported by some USB
+	  storage devices.  It permits higher performance by supporting
+	  multiple outstanding commands.
+
+	  If you don't know whether you have a UAS device, it is safe to
+	  say 'Y' or 'M' here and the kernel will use the right driver.
+
+	  If you compile this driver as a module, it will be named uas.
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
new file mode 100644
index 000000000..46635fa4a
--- /dev/null
+++ b/drivers/usb/storage/Makefile
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the USB Mass Storage device drivers.
+#
+# 15 Aug 2000, Christoph Hellwig <hch@infradead.org>
+# Rewritten to use lists instead of if-statements.
+#
+
+ccflags-y := -I $(srctree)/drivers/scsi
+
+ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_STORAGE
+
+obj-$(CONFIG_USB_UAS)		+= uas.o
+obj-$(CONFIG_USB_STORAGE)	+= usb-storage.o
+
+usb-storage-y := scsiglue.o protocol.o transport.o usb.o
+usb-storage-y += initializers.o sierra_ms.o option_ms.o
+usb-storage-y += usual-tables.o
+usb-storage-$(CONFIG_USB_STORAGE_DEBUG) += debug.o
+
+obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= ums-alauda.o
+obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o
+obj-$(CONFIG_USB_STORAGE_DATAFAB)	+= ums-datafab.o
+obj-$(CONFIG_USB_STORAGE_ENE_UB6250)	+= ums-eneub6250.o
+obj-$(CONFIG_USB_STORAGE_FREECOM)	+= ums-freecom.o
+obj-$(CONFIG_USB_STORAGE_ISD200)	+= ums-isd200.o
+obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= ums-jumpshot.o
+obj-$(CONFIG_USB_STORAGE_KARMA)		+= ums-karma.o
+obj-$(CONFIG_USB_STORAGE_ONETOUCH)	+= ums-onetouch.o
+obj-$(CONFIG_USB_STORAGE_REALTEK)	+= ums-realtek.o
+obj-$(CONFIG_USB_STORAGE_SDDR09)	+= ums-sddr09.o
+obj-$(CONFIG_USB_STORAGE_SDDR55)	+= ums-sddr55.o
+obj-$(CONFIG_USB_STORAGE_USBAT)		+= ums-usbat.o
+
+ums-alauda-y		:= alauda.o
+ums-cypress-y		:= cypress_atacb.o
+ums-datafab-y		:= datafab.o
+ums-eneub6250-y		:= ene_ub6250.o
+ums-freecom-y		:= freecom.o
+ums-isd200-y		:= isd200.o
+ums-jumpshot-y		:= jumpshot.o
+ums-karma-y		:= karma.o
+ums-onetouch-y		:= onetouch.o
+ums-realtek-y		:= realtek_cr.o
+ums-sddr09-y		:= sddr09.o
+ums-sddr55-y		:= sddr55.o
+ums-usbat-y		:= shuttle_usbat.o
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
new file mode 100644
index 000000000..115f05a62
--- /dev/null
+++ b/drivers/usb/storage/alauda.c
@@ -0,0 +1,1271 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Alauda-based card readers
+ *
+ * Current development and maintenance by:
+ *   (c) 2005 Daniel Drake <dsd@gentoo.org>
+ *
+ * The 'Alauda' is a chip manufacturered by RATOC for OEM use.
+ *
+ * Alauda implements a vendor-specific command set to access two media reader
+ * ports (XD, SmartMedia). This driver converts SCSI commands to the commands
+ * which are accepted by these devices.
+ *
+ * The driver was developed through reverse-engineering, with the help of the
+ * sddr09 driver which has many similarities, and with some help from the
+ * (very old) vendor-supplied GPL sma03 driver.
+ *
+ * For protocol info, see http://alauda.sourceforge.net
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "scsiglue.h"
+
+#define DRV_NAME "ums-alauda"
+
+MODULE_DESCRIPTION("Driver for Alauda-based card readers");
+MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(USB_STORAGE);
+
+/*
+ * Status bytes
+ */
+#define ALAUDA_STATUS_ERROR		0x01
+#define ALAUDA_STATUS_READY		0x40
+
+/*
+ * Control opcodes (for request field)
+ */
+#define ALAUDA_GET_XD_MEDIA_STATUS	0x08
+#define ALAUDA_GET_SM_MEDIA_STATUS	0x98
+#define ALAUDA_ACK_XD_MEDIA_CHANGE	0x0a
+#define ALAUDA_ACK_SM_MEDIA_CHANGE	0x9a
+#define ALAUDA_GET_XD_MEDIA_SIG		0x86
+#define ALAUDA_GET_SM_MEDIA_SIG		0x96
+
+/*
+ * Bulk command identity (byte 0)
+ */
+#define ALAUDA_BULK_CMD			0x40
+
+/*
+ * Bulk opcodes (byte 1)
+ */
+#define ALAUDA_BULK_GET_REDU_DATA	0x85
+#define ALAUDA_BULK_READ_BLOCK		0x94
+#define ALAUDA_BULK_ERASE_BLOCK		0xa3
+#define ALAUDA_BULK_WRITE_BLOCK		0xb4
+#define ALAUDA_BULK_GET_STATUS2		0xb7
+#define ALAUDA_BULK_RESET_MEDIA		0xe0
+
+/*
+ * Port to operate on (byte 8)
+ */
+#define ALAUDA_PORT_XD			0x00
+#define ALAUDA_PORT_SM			0x01
+
+/*
+ * LBA and PBA are unsigned ints. Special values.
+ */
+#define UNDEF    0xffff
+#define SPARE    0xfffe
+#define UNUSABLE 0xfffd
+
+struct alauda_media_info {
+	unsigned long capacity;		/* total media size in bytes */
+	unsigned int pagesize;		/* page size in bytes */
+	unsigned int blocksize;		/* number of pages per block */
+	unsigned int uzonesize;		/* number of usable blocks per zone */
+	unsigned int zonesize;		/* number of blocks per zone */
+	unsigned int blockmask;		/* mask to get page from address */
+
+	unsigned char pageshift;
+	unsigned char blockshift;
+	unsigned char zoneshift;
+
+	u16 **lba_to_pba;		/* logical to physical block map */
+	u16 **pba_to_lba;		/* physical to logical block map */
+};
+
+struct alauda_info {
+	struct alauda_media_info port[2];
+	int wr_ep;			/* endpoint to write data out of */
+
+	unsigned char sense_key;
+	unsigned long sense_asc;	/* additional sense code */
+	unsigned long sense_ascq;	/* additional sense code qualifier */
+};
+
+#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
+#define LSB_of(s) ((s)&0xFF)
+#define MSB_of(s) ((s)>>8)
+
+#define MEDIA_PORT(us) us->srb->device->lun
+#define MEDIA_INFO(us) ((struct alauda_info *)us->extra)->port[MEDIA_PORT(us)]
+
+#define PBA_LO(pba) ((pba & 0xF) << 5)
+#define PBA_HI(pba) (pba >> 3)
+#define PBA_ZONE(pba) (pba >> 11)
+
+static int init_alauda(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+static struct usb_device_id alauda_usb_ids[] = {
+#	include "unusual_alauda.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, alauda_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev alauda_unusual_dev_list[] = {
+#	include "unusual_alauda.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+/*
+ * Media handling
+ */
+
+struct alauda_card_info {
+	unsigned char id;		/* id byte */
+	unsigned char chipshift;	/* 1<<cs bytes total capacity */
+	unsigned char pageshift;	/* 1<<ps bytes in a page */
+	unsigned char blockshift;	/* 1<<bs pages per block */
+	unsigned char zoneshift;	/* 1<<zs blocks per zone */
+};
+
+static struct alauda_card_info alauda_card_ids[] = {
+	/* NAND flash */
+	{ 0x6e, 20, 8, 4, 8},	/* 1 MB */
+	{ 0xe8, 20, 8, 4, 8},	/* 1 MB */
+	{ 0xec, 20, 8, 4, 8},	/* 1 MB */
+	{ 0x64, 21, 8, 4, 9}, 	/* 2 MB */
+	{ 0xea, 21, 8, 4, 9},	/* 2 MB */
+	{ 0x6b, 22, 9, 4, 9},	/* 4 MB */
+	{ 0xe3, 22, 9, 4, 9},	/* 4 MB */
+	{ 0xe5, 22, 9, 4, 9},	/* 4 MB */
+	{ 0xe6, 23, 9, 4, 10},	/* 8 MB */
+	{ 0x73, 24, 9, 5, 10},	/* 16 MB */
+	{ 0x75, 25, 9, 5, 10},	/* 32 MB */
+	{ 0x76, 26, 9, 5, 10},	/* 64 MB */
+	{ 0x79, 27, 9, 5, 10},	/* 128 MB */
+	{ 0x71, 28, 9, 5, 10},	/* 256 MB */
+
+	/* MASK ROM */
+	{ 0x5d, 21, 9, 4, 8},	/* 2 MB */
+	{ 0xd5, 22, 9, 4, 9},	/* 4 MB */
+	{ 0xd6, 23, 9, 4, 10},	/* 8 MB */
+	{ 0x57, 24, 9, 4, 11},	/* 16 MB */
+	{ 0x58, 25, 9, 4, 12},	/* 32 MB */
+	{ 0,}
+};
+
+static struct alauda_card_info *alauda_card_find_id(unsigned char id)
+{
+	int i;
+
+	for (i = 0; alauda_card_ids[i].id != 0; i++)
+		if (alauda_card_ids[i].id == id)
+			return &(alauda_card_ids[i]);
+	return NULL;
+}
+
+/*
+ * ECC computation.
+ */
+
+static unsigned char parity[256];
+static unsigned char ecc2[256];
+
+static void nand_init_ecc(void)
+{
+	int i, j, a;
+
+	parity[0] = 0;
+	for (i = 1; i < 256; i++)
+		parity[i] = (parity[i&(i-1)] ^ 1);
+
+	for (i = 0; i < 256; i++) {
+		a = 0;
+		for (j = 0; j < 8; j++) {
+			if (i & (1<<j)) {
+				if ((j & 1) == 0)
+					a ^= 0x04;
+				if ((j & 2) == 0)
+					a ^= 0x10;
+				if ((j & 4) == 0)
+					a ^= 0x40;
+			}
+		}
+		ecc2[i] = ~(a ^ (a<<1) ^ (parity[i] ? 0xa8 : 0));
+	}
+}
+
+/* compute 3-byte ecc on 256 bytes */
+static void nand_compute_ecc(unsigned char *data, unsigned char *ecc)
+{
+	int i, j, a;
+	unsigned char par = 0, bit, bits[8] = {0};
+
+	/* collect 16 checksum bits */
+	for (i = 0; i < 256; i++) {
+		par ^= data[i];
+		bit = parity[data[i]];
+		for (j = 0; j < 8; j++)
+			if ((i & (1<<j)) == 0)
+				bits[j] ^= bit;
+	}
+
+	/* put 4+4+4 = 12 bits in the ecc */
+	a = (bits[3] << 6) + (bits[2] << 4) + (bits[1] << 2) + bits[0];
+	ecc[0] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
+
+	a = (bits[7] << 6) + (bits[6] << 4) + (bits[5] << 2) + bits[4];
+	ecc[1] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
+
+	ecc[2] = ecc2[par];
+}
+
+static int nand_compare_ecc(unsigned char *data, unsigned char *ecc)
+{
+	return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]);
+}
+
+static void nand_store_ecc(unsigned char *data, unsigned char *ecc)
+{
+	memcpy(data, ecc, 3);
+}
+
+/*
+ * Alauda driver
+ */
+
+/*
+ * Forget our PBA <---> LBA mappings for a particular port
+ */
+static void alauda_free_maps (struct alauda_media_info *media_info)
+{
+	unsigned int shift = media_info->zoneshift
+		+ media_info->blockshift + media_info->pageshift;
+	unsigned int num_zones = media_info->capacity >> shift;
+	unsigned int i;
+
+	if (media_info->lba_to_pba != NULL)
+		for (i = 0; i < num_zones; i++) {
+			kfree(media_info->lba_to_pba[i]);
+			media_info->lba_to_pba[i] = NULL;
+		}
+
+	if (media_info->pba_to_lba != NULL)
+		for (i = 0; i < num_zones; i++) {
+			kfree(media_info->pba_to_lba[i]);
+			media_info->pba_to_lba[i] = NULL;
+		}
+}
+
+/*
+ * Returns 2 bytes of status data
+ * The first byte describes media status, and second byte describes door status
+ */
+static int alauda_get_media_status(struct us_data *us, unsigned char *data)
+{
+	int rc;
+	unsigned char command;
+
+	if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
+		command = ALAUDA_GET_XD_MEDIA_STATUS;
+	else
+		command = ALAUDA_GET_SM_MEDIA_STATUS;
+
+	rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
+		command, 0xc0, 0, 1, data, 2);
+
+	if (rc == USB_STOR_XFER_GOOD)
+		usb_stor_dbg(us, "Media status %02X %02X\n", data[0], data[1]);
+
+	return rc;
+}
+
+/*
+ * Clears the "media was changed" bit so that we know when it changes again
+ * in the future.
+ */
+static int alauda_ack_media(struct us_data *us)
+{
+	unsigned char command;
+
+	if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
+		command = ALAUDA_ACK_XD_MEDIA_CHANGE;
+	else
+		command = ALAUDA_ACK_SM_MEDIA_CHANGE;
+
+	return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+		command, 0x40, 0, 1, NULL, 0);
+}
+
+/*
+ * Retrieves a 4-byte media signature, which indicates manufacturer, capacity,
+ * and some other details.
+ */
+static int alauda_get_media_signature(struct us_data *us, unsigned char *data)
+{
+	unsigned char command;
+
+	if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
+		command = ALAUDA_GET_XD_MEDIA_SIG;
+	else
+		command = ALAUDA_GET_SM_MEDIA_SIG;
+
+	return usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
+		command, 0xc0, 0, 0, data, 4);
+}
+
+/*
+ * Resets the media status (but not the whole device?)
+ */
+static int alauda_reset_media(struct us_data *us)
+{
+	unsigned char *command = us->iobuf;
+
+	memset(command, 0, 9);
+	command[0] = ALAUDA_BULK_CMD;
+	command[1] = ALAUDA_BULK_RESET_MEDIA;
+	command[8] = MEDIA_PORT(us);
+
+	return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+		command, 9, NULL);
+}
+
+/*
+ * Examines the media and deduces capacity, etc.
+ */
+static int alauda_init_media(struct us_data *us)
+{
+	unsigned char *data = us->iobuf;
+	int ready = 0;
+	struct alauda_card_info *media_info;
+	unsigned int num_zones;
+
+	while (ready == 0) {
+		msleep(20);
+
+		if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (data[0] & 0x10)
+			ready = 1;
+	}
+
+	usb_stor_dbg(us, "We are ready for action!\n");
+
+	if (alauda_ack_media(us) != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	msleep(10);
+
+	if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	if (data[0] != 0x14) {
+		usb_stor_dbg(us, "Media not ready after ack\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	usb_stor_dbg(us, "Media signature: %4ph\n", data);
+	media_info = alauda_card_find_id(data[1]);
+	if (media_info == NULL) {
+		pr_warn("alauda_init_media: Unrecognised media signature: %4ph\n",
+			data);
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	MEDIA_INFO(us).capacity = 1 << media_info->chipshift;
+	usb_stor_dbg(us, "Found media with capacity: %ldMB\n",
+		     MEDIA_INFO(us).capacity >> 20);
+
+	MEDIA_INFO(us).pageshift = media_info->pageshift;
+	MEDIA_INFO(us).blockshift = media_info->blockshift;
+	MEDIA_INFO(us).zoneshift = media_info->zoneshift;
+
+	MEDIA_INFO(us).pagesize = 1 << media_info->pageshift;
+	MEDIA_INFO(us).blocksize = 1 << media_info->blockshift;
+	MEDIA_INFO(us).zonesize = 1 << media_info->zoneshift;
+
+	MEDIA_INFO(us).uzonesize = ((1 << media_info->zoneshift) / 128) * 125;
+	MEDIA_INFO(us).blockmask = MEDIA_INFO(us).blocksize - 1;
+
+	num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift
+		+ MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
+	MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
+	MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
+	if (MEDIA_INFO(us).pba_to_lba == NULL || MEDIA_INFO(us).lba_to_pba == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	if (alauda_reset_media(us) != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Examines the media status and does the right thing when the media has gone,
+ * appeared, or changed.
+ */
+static int alauda_check_media(struct us_data *us)
+{
+	struct alauda_info *info = (struct alauda_info *) us->extra;
+	unsigned char *status = us->iobuf;
+	int rc;
+
+	rc = alauda_get_media_status(us, status);
+	if (rc != USB_STOR_XFER_GOOD) {
+		status[0] = 0xF0;	/* Pretend there's no media */
+		status[1] = 0;
+	}
+
+	/* Check for no media or door open */
+	if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10)
+		|| ((status[1] & 0x01) == 0)) {
+		usb_stor_dbg(us, "No media, or door open\n");
+		alauda_free_maps(&MEDIA_INFO(us));
+		info->sense_key = 0x02;
+		info->sense_asc = 0x3A;
+		info->sense_ascq = 0x00;
+		return USB_STOR_TRANSPORT_FAILED;
+	}
+
+	/* Check for media change */
+	if (status[0] & 0x08) {
+		usb_stor_dbg(us, "Media change detected\n");
+		alauda_free_maps(&MEDIA_INFO(us));
+		alauda_init_media(us);
+
+		info->sense_key = UNIT_ATTENTION;
+		info->sense_asc = 0x28;
+		info->sense_ascq = 0x00;
+		return USB_STOR_TRANSPORT_FAILED;
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Checks the status from the 2nd status register
+ * Returns 3 bytes of status data, only the first is known
+ */
+static int alauda_check_status2(struct us_data *us)
+{
+	int rc;
+	unsigned char command[] = {
+		ALAUDA_BULK_CMD, ALAUDA_BULK_GET_STATUS2,
+		0, 0, 0, 0, 3, 0, MEDIA_PORT(us)
+	};
+	unsigned char data[3];
+
+	rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+		command, 9, NULL);
+	if (rc != USB_STOR_XFER_GOOD)
+		return rc;
+
+	rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+		data, 3, NULL);
+	if (rc != USB_STOR_XFER_GOOD)
+		return rc;
+
+	usb_stor_dbg(us, "%3ph\n", data);
+	if (data[0] & ALAUDA_STATUS_ERROR)
+		return USB_STOR_XFER_ERROR;
+
+	return USB_STOR_XFER_GOOD;
+}
+
+/*
+ * Gets the redundancy data for the first page of a PBA
+ * Returns 16 bytes.
+ */
+static int alauda_get_redu_data(struct us_data *us, u16 pba, unsigned char *data)
+{
+	int rc;
+	unsigned char command[] = {
+		ALAUDA_BULK_CMD, ALAUDA_BULK_GET_REDU_DATA,
+		PBA_HI(pba), PBA_ZONE(pba), 0, PBA_LO(pba), 0, 0, MEDIA_PORT(us)
+	};
+
+	rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+		command, 9, NULL);
+	if (rc != USB_STOR_XFER_GOOD)
+		return rc;
+
+	return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+		data, 16, NULL);
+}
+
+/*
+ * Finds the first unused PBA in a zone
+ * Returns the absolute PBA of an unused PBA, or 0 if none found.
+ */
+static u16 alauda_find_unused_pba(struct alauda_media_info *info,
+	unsigned int zone)
+{
+	u16 *pba_to_lba = info->pba_to_lba[zone];
+	unsigned int i;
+
+	for (i = 0; i < info->zonesize; i++)
+		if (pba_to_lba[i] == UNDEF)
+			return (zone << info->zoneshift) + i;
+
+	return 0;
+}
+
+/*
+ * Reads the redundancy data for all PBA's in a zone
+ * Produces lba <--> pba mappings
+ */
+static int alauda_read_map(struct us_data *us, unsigned int zone)
+{
+	unsigned char *data = us->iobuf;
+	int result;
+	int i, j;
+	unsigned int zonesize = MEDIA_INFO(us).zonesize;
+	unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
+	unsigned int lba_offset, lba_real, blocknum;
+	unsigned int zone_base_lba = zone * uzonesize;
+	unsigned int zone_base_pba = zone * zonesize;
+	u16 *lba_to_pba = kcalloc(zonesize, sizeof(u16), GFP_NOIO);
+	u16 *pba_to_lba = kcalloc(zonesize, sizeof(u16), GFP_NOIO);
+	if (lba_to_pba == NULL || pba_to_lba == NULL) {
+		result = USB_STOR_TRANSPORT_ERROR;
+		goto error;
+	}
+
+	usb_stor_dbg(us, "Mapping blocks for zone %d\n", zone);
+
+	/* 1024 PBA's per zone */
+	for (i = 0; i < zonesize; i++)
+		lba_to_pba[i] = pba_to_lba[i] = UNDEF;
+
+	for (i = 0; i < zonesize; i++) {
+		blocknum = zone_base_pba + i;
+
+		result = alauda_get_redu_data(us, blocknum, data);
+		if (result != USB_STOR_XFER_GOOD) {
+			result = USB_STOR_TRANSPORT_ERROR;
+			goto error;
+		}
+
+		/* special PBAs have control field 0^16 */
+		for (j = 0; j < 16; j++)
+			if (data[j] != 0)
+				goto nonz;
+		pba_to_lba[i] = UNUSABLE;
+		usb_stor_dbg(us, "PBA %d has no logical mapping\n", blocknum);
+		continue;
+
+	nonz:
+		/* unwritten PBAs have control field FF^16 */
+		for (j = 0; j < 16; j++)
+			if (data[j] != 0xff)
+				goto nonff;
+		continue;
+
+	nonff:
+		/* normal PBAs start with six FFs */
+		if (j < 6) {
+			usb_stor_dbg(us, "PBA %d has no logical mapping: reserved area = %02X%02X%02X%02X data status %02X block status %02X\n",
+				     blocknum,
+				     data[0], data[1], data[2], data[3],
+				     data[4], data[5]);
+			pba_to_lba[i] = UNUSABLE;
+			continue;
+		}
+
+		if ((data[6] >> 4) != 0x01) {
+			usb_stor_dbg(us, "PBA %d has invalid address field %02X%02X/%02X%02X\n",
+				     blocknum, data[6], data[7],
+				     data[11], data[12]);
+			pba_to_lba[i] = UNUSABLE;
+			continue;
+		}
+
+		/* check even parity */
+		if (parity[data[6] ^ data[7]]) {
+			printk(KERN_WARNING
+			       "alauda_read_map: Bad parity in LBA for block %d"
+			       " (%02X %02X)\n", i, data[6], data[7]);
+			pba_to_lba[i] = UNUSABLE;
+			continue;
+		}
+
+		lba_offset = short_pack(data[7], data[6]);
+		lba_offset = (lba_offset & 0x07FF) >> 1;
+		lba_real = lba_offset + zone_base_lba;
+
+		/*
+		 * Every 1024 physical blocks ("zone"), the LBA numbers
+		 * go back to zero, but are within a higher block of LBA's.
+		 * Also, there is a maximum of 1000 LBA's per zone.
+		 * In other words, in PBA 1024-2047 you will find LBA 0-999
+		 * which are really LBA 1000-1999. This allows for 24 bad
+		 * or special physical blocks per zone.
+		 */
+
+		if (lba_offset >= uzonesize) {
+			printk(KERN_WARNING
+			       "alauda_read_map: Bad low LBA %d for block %d\n",
+			       lba_real, blocknum);
+			continue;
+		}
+
+		if (lba_to_pba[lba_offset] != UNDEF) {
+			printk(KERN_WARNING
+			       "alauda_read_map: "
+			       "LBA %d seen for PBA %d and %d\n",
+			       lba_real, lba_to_pba[lba_offset], blocknum);
+			continue;
+		}
+
+		pba_to_lba[i] = lba_real;
+		lba_to_pba[lba_offset] = blocknum;
+		continue;
+	}
+
+	MEDIA_INFO(us).lba_to_pba[zone] = lba_to_pba;
+	MEDIA_INFO(us).pba_to_lba[zone] = pba_to_lba;
+	result = 0;
+	goto out;
+
+error:
+	kfree(lba_to_pba);
+	kfree(pba_to_lba);
+out:
+	return result;
+}
+
+/*
+ * Checks to see whether we have already mapped a certain zone
+ * If we haven't, the map is generated
+ */
+static void alauda_ensure_map_for_zone(struct us_data *us, unsigned int zone)
+{
+	if (MEDIA_INFO(us).lba_to_pba[zone] == NULL
+		|| MEDIA_INFO(us).pba_to_lba[zone] == NULL)
+		alauda_read_map(us, zone);
+}
+
+/*
+ * Erases an entire block
+ */
+static int alauda_erase_block(struct us_data *us, u16 pba)
+{
+	int rc;
+	unsigned char command[] = {
+		ALAUDA_BULK_CMD, ALAUDA_BULK_ERASE_BLOCK, PBA_HI(pba),
+		PBA_ZONE(pba), 0, PBA_LO(pba), 0x02, 0, MEDIA_PORT(us)
+	};
+	unsigned char buf[2];
+
+	usb_stor_dbg(us, "Erasing PBA %d\n", pba);
+
+	rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+		command, 9, NULL);
+	if (rc != USB_STOR_XFER_GOOD)
+		return rc;
+
+	rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+		buf, 2, NULL);
+	if (rc != USB_STOR_XFER_GOOD)
+		return rc;
+
+	usb_stor_dbg(us, "Erase result: %02X %02X\n", buf[0], buf[1]);
+	return rc;
+}
+
+/*
+ * Reads data from a certain offset page inside a PBA, including interleaved
+ * redundancy data. Returns (pagesize+64)*pages bytes in data.
+ */
+static int alauda_read_block_raw(struct us_data *us, u16 pba,
+		unsigned int page, unsigned int pages, unsigned char *data)
+{
+	int rc;
+	unsigned char command[] = {
+		ALAUDA_BULK_CMD, ALAUDA_BULK_READ_BLOCK, PBA_HI(pba),
+		PBA_ZONE(pba), 0, PBA_LO(pba) + page, pages, 0, MEDIA_PORT(us)
+	};
+
+	usb_stor_dbg(us, "pba %d page %d count %d\n", pba, page, pages);
+
+	rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+		command, 9, NULL);
+	if (rc != USB_STOR_XFER_GOOD)
+		return rc;
+
+	return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+		data, (MEDIA_INFO(us).pagesize + 64) * pages, NULL);
+}
+
+/*
+ * Reads data from a certain offset page inside a PBA, excluding redundancy
+ * data. Returns pagesize*pages bytes in data. Note that data must be big enough
+ * to hold (pagesize+64)*pages bytes of data, but you can ignore those 'extra'
+ * trailing bytes outside this function.
+ */
+static int alauda_read_block(struct us_data *us, u16 pba,
+		unsigned int page, unsigned int pages, unsigned char *data)
+{
+	int i, rc;
+	unsigned int pagesize = MEDIA_INFO(us).pagesize;
+
+	rc = alauda_read_block_raw(us, pba, page, pages, data);
+	if (rc != USB_STOR_XFER_GOOD)
+		return rc;
+
+	/* Cut out the redundancy data */
+	for (i = 0; i < pages; i++) {
+		int dest_offset = i * pagesize;
+		int src_offset = i * (pagesize + 64);
+		memmove(data + dest_offset, data + src_offset, pagesize);
+	}
+
+	return rc;
+}
+
+/*
+ * Writes an entire block of data and checks status after write.
+ * Redundancy data must be already included in data. Data should be
+ * (pagesize+64)*blocksize bytes in length.
+ */
+static int alauda_write_block(struct us_data *us, u16 pba, unsigned char *data)
+{
+	int rc;
+	struct alauda_info *info = (struct alauda_info *) us->extra;
+	unsigned char command[] = {
+		ALAUDA_BULK_CMD, ALAUDA_BULK_WRITE_BLOCK, PBA_HI(pba),
+		PBA_ZONE(pba), 0, PBA_LO(pba), 32, 0, MEDIA_PORT(us)
+	};
+
+	usb_stor_dbg(us, "pba %d\n", pba);
+
+	rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+		command, 9, NULL);
+	if (rc != USB_STOR_XFER_GOOD)
+		return rc;
+
+	rc = usb_stor_bulk_transfer_buf(us, info->wr_ep, data,
+		(MEDIA_INFO(us).pagesize + 64) * MEDIA_INFO(us).blocksize,
+		NULL);
+	if (rc != USB_STOR_XFER_GOOD)
+		return rc;
+
+	return alauda_check_status2(us);
+}
+
+/*
+ * Write some data to a specific LBA.
+ */
+static int alauda_write_lba(struct us_data *us, u16 lba,
+		 unsigned int page, unsigned int pages,
+		 unsigned char *ptr, unsigned char *blockbuffer)
+{
+	u16 pba, lbap, new_pba;
+	unsigned char *bptr, *cptr, *xptr;
+	unsigned char ecc[3];
+	int i, result;
+	unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
+	unsigned int zonesize = MEDIA_INFO(us).zonesize;
+	unsigned int pagesize = MEDIA_INFO(us).pagesize;
+	unsigned int blocksize = MEDIA_INFO(us).blocksize;
+	unsigned int lba_offset = lba % uzonesize;
+	unsigned int new_pba_offset;
+	unsigned int zone = lba / uzonesize;
+
+	alauda_ensure_map_for_zone(us, zone);
+
+	pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
+	if (pba == 1) {
+		/*
+		 * Maybe it is impossible to write to PBA 1.
+		 * Fake success, but don't do anything.
+		 */
+		printk(KERN_WARNING
+		       "alauda_write_lba: avoid writing to pba 1\n");
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone);
+	if (!new_pba) {
+		printk(KERN_WARNING
+		       "alauda_write_lba: Out of unused blocks\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/* read old contents */
+	if (pba != UNDEF) {
+		result = alauda_read_block_raw(us, pba, 0,
+			blocksize, blockbuffer);
+		if (result != USB_STOR_XFER_GOOD)
+			return result;
+	} else {
+		memset(blockbuffer, 0, blocksize * (pagesize + 64));
+	}
+
+	lbap = (lba_offset << 1) | 0x1000;
+	if (parity[MSB_of(lbap) ^ LSB_of(lbap)])
+		lbap ^= 1;
+
+	/* check old contents and fill lba */
+	for (i = 0; i < blocksize; i++) {
+		bptr = blockbuffer + (i * (pagesize + 64));
+		cptr = bptr + pagesize;
+		nand_compute_ecc(bptr, ecc);
+		if (!nand_compare_ecc(cptr+13, ecc)) {
+			usb_stor_dbg(us, "Warning: bad ecc in page %d- of pba %d\n",
+				     i, pba);
+			nand_store_ecc(cptr+13, ecc);
+		}
+		nand_compute_ecc(bptr + (pagesize / 2), ecc);
+		if (!nand_compare_ecc(cptr+8, ecc)) {
+			usb_stor_dbg(us, "Warning: bad ecc in page %d+ of pba %d\n",
+				     i, pba);
+			nand_store_ecc(cptr+8, ecc);
+		}
+		cptr[6] = cptr[11] = MSB_of(lbap);
+		cptr[7] = cptr[12] = LSB_of(lbap);
+	}
+
+	/* copy in new stuff and compute ECC */
+	xptr = ptr;
+	for (i = page; i < page+pages; i++) {
+		bptr = blockbuffer + (i * (pagesize + 64));
+		cptr = bptr + pagesize;
+		memcpy(bptr, xptr, pagesize);
+		xptr += pagesize;
+		nand_compute_ecc(bptr, ecc);
+		nand_store_ecc(cptr+13, ecc);
+		nand_compute_ecc(bptr + (pagesize / 2), ecc);
+		nand_store_ecc(cptr+8, ecc);
+	}
+
+	result = alauda_write_block(us, new_pba, blockbuffer);
+	if (result != USB_STOR_XFER_GOOD)
+		return result;
+
+	new_pba_offset = new_pba - (zone * zonesize);
+	MEDIA_INFO(us).pba_to_lba[zone][new_pba_offset] = lba;
+	MEDIA_INFO(us).lba_to_pba[zone][lba_offset] = new_pba;
+	usb_stor_dbg(us, "Remapped LBA %d to PBA %d\n", lba, new_pba);
+
+	if (pba != UNDEF) {
+		unsigned int pba_offset = pba - (zone * zonesize);
+		result = alauda_erase_block(us, pba);
+		if (result != USB_STOR_XFER_GOOD)
+			return result;
+		MEDIA_INFO(us).pba_to_lba[zone][pba_offset] = UNDEF;
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Read data from a specific sector address
+ */
+static int alauda_read_data(struct us_data *us, unsigned long address,
+		unsigned int sectors)
+{
+	unsigned char *buffer;
+	u16 lba, max_lba;
+	unsigned int page, len, offset;
+	unsigned int blockshift = MEDIA_INFO(us).blockshift;
+	unsigned int pageshift = MEDIA_INFO(us).pageshift;
+	unsigned int blocksize = MEDIA_INFO(us).blocksize;
+	unsigned int pagesize = MEDIA_INFO(us).pagesize;
+	unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
+	struct scatterlist *sg;
+	int result;
+
+	/*
+	 * Since we only read in one block at a time, we have to create
+	 * a bounce buffer and move the data a piece at a time between the
+	 * bounce buffer and the actual transfer buffer.
+	 * We make this buffer big enough to hold temporary redundancy data,
+	 * which we use when reading the data blocks.
+	 */
+
+	len = min(sectors, blocksize) * (pagesize + 64);
+	buffer = kmalloc(len, GFP_NOIO);
+	if (!buffer)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/* Figure out the initial LBA and page */
+	lba = address >> blockshift;
+	page = (address & MEDIA_INFO(us).blockmask);
+	max_lba = MEDIA_INFO(us).capacity >> (blockshift + pageshift);
+
+	result = USB_STOR_TRANSPORT_GOOD;
+	offset = 0;
+	sg = NULL;
+
+	while (sectors > 0) {
+		unsigned int zone = lba / uzonesize; /* integer division */
+		unsigned int lba_offset = lba - (zone * uzonesize);
+		unsigned int pages;
+		u16 pba;
+		alauda_ensure_map_for_zone(us, zone);
+
+		/* Not overflowing capacity? */
+		if (lba >= max_lba) {
+			usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n",
+				     lba, max_lba);
+			result = USB_STOR_TRANSPORT_ERROR;
+			break;
+		}
+
+		/* Find number of pages we can read in this block */
+		pages = min(sectors, blocksize - page);
+		len = pages << pageshift;
+
+		/* Find where this lba lives on disk */
+		pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
+
+		if (pba == UNDEF) {	/* this lba was never written */
+			usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n",
+				     pages, lba, page);
+
+			/*
+			 * This is not really an error. It just means
+			 * that the block has never been written.
+			 * Instead of returning USB_STOR_TRANSPORT_ERROR
+			 * it is better to return all zero data.
+			 */
+
+			memset(buffer, 0, len);
+		} else {
+			usb_stor_dbg(us, "Read %d pages, from PBA %d (LBA %d) page %d\n",
+				     pages, pba, lba, page);
+
+			result = alauda_read_block(us, pba, page, pages, buffer);
+			if (result != USB_STOR_TRANSPORT_GOOD)
+				break;
+		}
+
+		/* Store the data in the transfer buffer */
+		usb_stor_access_xfer_buf(buffer, len, us->srb,
+				&sg, &offset, TO_XFER_BUF);
+
+		page = 0;
+		lba++;
+		sectors -= pages;
+	}
+
+	kfree(buffer);
+	return result;
+}
+
+/*
+ * Write data to a specific sector address
+ */
+static int alauda_write_data(struct us_data *us, unsigned long address,
+		unsigned int sectors)
+{
+	unsigned char *buffer, *blockbuffer;
+	unsigned int page, len, offset;
+	unsigned int blockshift = MEDIA_INFO(us).blockshift;
+	unsigned int pageshift = MEDIA_INFO(us).pageshift;
+	unsigned int blocksize = MEDIA_INFO(us).blocksize;
+	unsigned int pagesize = MEDIA_INFO(us).pagesize;
+	struct scatterlist *sg;
+	u16 lba, max_lba;
+	int result;
+
+	/*
+	 * Since we don't write the user data directly to the device,
+	 * we have to create a bounce buffer and move the data a piece
+	 * at a time between the bounce buffer and the actual transfer buffer.
+	 */
+
+	len = min(sectors, blocksize) * pagesize;
+	buffer = kmalloc(len, GFP_NOIO);
+	if (!buffer)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/*
+	 * We also need a temporary block buffer, where we read in the old data,
+	 * overwrite parts with the new data, and manipulate the redundancy data
+	 */
+	blockbuffer = kmalloc_array(pagesize + 64, blocksize, GFP_NOIO);
+	if (!blockbuffer) {
+		kfree(buffer);
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/* Figure out the initial LBA and page */
+	lba = address >> blockshift;
+	page = (address & MEDIA_INFO(us).blockmask);
+	max_lba = MEDIA_INFO(us).capacity >> (pageshift + blockshift);
+
+	result = USB_STOR_TRANSPORT_GOOD;
+	offset = 0;
+	sg = NULL;
+
+	while (sectors > 0) {
+		/* Write as many sectors as possible in this block */
+		unsigned int pages = min(sectors, blocksize - page);
+		len = pages << pageshift;
+
+		/* Not overflowing capacity? */
+		if (lba >= max_lba) {
+			usb_stor_dbg(us, "Requested lba %u exceeds maximum %u\n",
+				     lba, max_lba);
+			result = USB_STOR_TRANSPORT_ERROR;
+			break;
+		}
+
+		/* Get the data from the transfer buffer */
+		usb_stor_access_xfer_buf(buffer, len, us->srb,
+				&sg, &offset, FROM_XFER_BUF);
+
+		result = alauda_write_lba(us, lba, page, pages, buffer,
+			blockbuffer);
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			break;
+
+		page = 0;
+		lba++;
+		sectors -= pages;
+	}
+
+	kfree(buffer);
+	kfree(blockbuffer);
+	return result;
+}
+
+/*
+ * Our interface with the rest of the world
+ */
+
+static void alauda_info_destructor(void *extra)
+{
+	struct alauda_info *info = (struct alauda_info *) extra;
+	int port;
+
+	if (!info)
+		return;
+
+	for (port = 0; port < 2; port++) {
+		struct alauda_media_info *media_info = &info->port[port];
+
+		alauda_free_maps(media_info);
+		kfree(media_info->lba_to_pba);
+		kfree(media_info->pba_to_lba);
+	}
+}
+
+/*
+ * Initialize alauda_info struct and find the data-write endpoint
+ */
+static int init_alauda(struct us_data *us)
+{
+	struct alauda_info *info;
+	struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting;
+	nand_init_ecc();
+
+	us->extra = kzalloc(sizeof(struct alauda_info), GFP_NOIO);
+	if (!us->extra)
+		return -ENOMEM;
+
+	info = (struct alauda_info *) us->extra;
+	us->extra_destructor = alauda_info_destructor;
+
+	info->wr_ep = usb_sndbulkpipe(us->pusb_dev,
+		altsetting->endpoint[0].desc.bEndpointAddress
+		& USB_ENDPOINT_NUMBER_MASK);
+
+	return 0;
+}
+
+static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	int rc;
+	struct alauda_info *info = (struct alauda_info *) us->extra;
+	unsigned char *ptr = us->iobuf;
+	static unsigned char inquiry_response[36] = {
+		0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
+	};
+
+	if (srb->cmnd[0] == INQUIRY) {
+		usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
+		memcpy(ptr, inquiry_response, sizeof(inquiry_response));
+		fill_inquiry_response(us, ptr, 36);
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == TEST_UNIT_READY) {
+		usb_stor_dbg(us, "TEST_UNIT_READY\n");
+		return alauda_check_media(us);
+	}
+
+	if (srb->cmnd[0] == READ_CAPACITY) {
+		unsigned int num_zones;
+		unsigned long capacity;
+
+		rc = alauda_check_media(us);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+
+		num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift
+			+ MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
+
+		capacity = num_zones * MEDIA_INFO(us).uzonesize
+			* MEDIA_INFO(us).blocksize;
+
+		/* Report capacity and page size */
+		((__be32 *) ptr)[0] = cpu_to_be32(capacity - 1);
+		((__be32 *) ptr)[1] = cpu_to_be32(512);
+
+		usb_stor_set_xfer_buf(ptr, 8, srb);
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == READ_10) {
+		unsigned int page, pages;
+
+		rc = alauda_check_media(us);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+
+		page = short_pack(srb->cmnd[3], srb->cmnd[2]);
+		page <<= 16;
+		page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
+		pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
+
+		usb_stor_dbg(us, "READ_10: page %d pagect %d\n", page, pages);
+
+		return alauda_read_data(us, page, pages);
+	}
+
+	if (srb->cmnd[0] == WRITE_10) {
+		unsigned int page, pages;
+
+		rc = alauda_check_media(us);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+
+		page = short_pack(srb->cmnd[3], srb->cmnd[2]);
+		page <<= 16;
+		page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
+		pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
+
+		usb_stor_dbg(us, "WRITE_10: page %d pagect %d\n", page, pages);
+
+		return alauda_write_data(us, page, pages);
+	}
+
+	if (srb->cmnd[0] == REQUEST_SENSE) {
+		usb_stor_dbg(us, "REQUEST_SENSE\n");
+
+		memset(ptr, 0, 18);
+		ptr[0] = 0xF0;
+		ptr[2] = info->sense_key;
+		ptr[7] = 11;
+		ptr[12] = info->sense_asc;
+		ptr[13] = info->sense_ascq;
+		usb_stor_set_xfer_buf(ptr, 18, srb);
+
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+		/*
+		 * sure.  whatever.  not like we can stop the user from popping
+		 * the media out of the device (no locking doors, etc)
+		 */
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
+		     srb->cmnd[0], srb->cmnd[0]);
+	info->sense_key = 0x05;
+	info->sense_asc = 0x20;
+	info->sense_ascq = 0x00;
+	return USB_STOR_TRANSPORT_FAILED;
+}
+
+static struct scsi_host_template alauda_host_template;
+
+static int alauda_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - alauda_usb_ids) + alauda_unusual_dev_list,
+			&alauda_host_template);
+	if (result)
+		return result;
+
+	us->transport_name  = "Alauda Control/Bulk";
+	us->transport = alauda_transport;
+	us->transport_reset = usb_stor_Bulk_reset;
+	us->max_lun = 1;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver alauda_driver = {
+	.name =		DRV_NAME,
+	.probe =	alauda_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	alauda_usb_ids,
+	.soft_unbind =	1,
+	.no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(alauda_driver, alauda_host_template, DRV_NAME);
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
new file mode 100644
index 000000000..98b3ec352
--- /dev/null
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for emulating SAT (ata pass through) on devices based
+ *       on the Cypress USB/ATA bridge supporting ATACB.
+ *
+ * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr)
+ */
+
+#include <linux/module.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_eh.h>
+#include <linux/ata.h>
+
+#include "usb.h"
+#include "protocol.h"
+#include "scsiglue.h"
+#include "debug.h"
+
+#define DRV_NAME "ums-cypress"
+
+MODULE_DESCRIPTION("SAT support for Cypress USB/ATA bridges with ATACB");
+MODULE_AUTHOR("Matthieu Castet <castet.matthieu@free.fr>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(USB_STORAGE);
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+static struct usb_device_id cypress_usb_ids[] = {
+#	include "unusual_cypress.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, cypress_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev cypress_unusual_dev_list[] = {
+#	include "unusual_cypress.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+/*
+ * ATACB is a protocol used on cypress usb<->ata bridge to
+ * send raw ATA command over mass storage
+ * There is a ATACB2 protocol that support LBA48 on newer chip.
+ * More info that be found on cy7c68310_8.pdf and cy7c68300c_8.pdf
+ * datasheet from cypress.com.
+ */
+static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
+{
+	unsigned char save_cmnd[MAX_COMMAND_SIZE];
+
+	if (likely(srb->cmnd[0] != ATA_16 && srb->cmnd[0] != ATA_12)) {
+		usb_stor_transparent_scsi_command(srb, us);
+		return;
+	}
+
+	memcpy(save_cmnd, srb->cmnd, sizeof(save_cmnd));
+	memset(srb->cmnd, 0, MAX_COMMAND_SIZE);
+
+	/* check if we support the command */
+	if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */
+		goto invalid_fld;
+	/* check protocol */
+	switch ((save_cmnd[1] >> 1) & 0xf) {
+	case 3: /*no DATA */
+	case 4: /* PIO in */
+	case 5: /* PIO out */
+		break;
+	default:
+		goto invalid_fld;
+	}
+
+	/* first build the ATACB command */
+	srb->cmd_len = 16;
+
+	srb->cmnd[0] = 0x24; /*
+			      * bVSCBSignature : vendor-specific command
+			      * this value can change, but most(all ?) manufacturers
+			      * keep the cypress default : 0x24
+			      */
+	srb->cmnd[1] = 0x24; /* bVSCBSubCommand : 0x24 for ATACB */
+
+	srb->cmnd[3] = 0xff - 1; /*
+				  * features, sector count, lba low, lba med
+				  * lba high, device, command are valid
+				  */
+	srb->cmnd[4] = 1; /* TransferBlockCount : 512 */
+
+	if (save_cmnd[0] == ATA_16) {
+		srb->cmnd[ 6] = save_cmnd[ 4]; /* features */
+		srb->cmnd[ 7] = save_cmnd[ 6]; /* sector count */
+		srb->cmnd[ 8] = save_cmnd[ 8]; /* lba low */
+		srb->cmnd[ 9] = save_cmnd[10]; /* lba med */
+		srb->cmnd[10] = save_cmnd[12]; /* lba high */
+		srb->cmnd[11] = save_cmnd[13]; /* device */
+		srb->cmnd[12] = save_cmnd[14]; /* command */
+
+		if (save_cmnd[1] & 0x01) {/* extended bit set for LBA48 */
+			/* this could be supported by atacb2 */
+			if (save_cmnd[3] || save_cmnd[5] || save_cmnd[7] || save_cmnd[9]
+					|| save_cmnd[11])
+				goto invalid_fld;
+		}
+	} else { /* ATA12 */
+		srb->cmnd[ 6] = save_cmnd[3]; /* features */
+		srb->cmnd[ 7] = save_cmnd[4]; /* sector count */
+		srb->cmnd[ 8] = save_cmnd[5]; /* lba low */
+		srb->cmnd[ 9] = save_cmnd[6]; /* lba med */
+		srb->cmnd[10] = save_cmnd[7]; /* lba high */
+		srb->cmnd[11] = save_cmnd[8]; /* device */
+		srb->cmnd[12] = save_cmnd[9]; /* command */
+
+	}
+	/* Filter SET_FEATURES - XFER MODE command */
+	if ((srb->cmnd[12] == ATA_CMD_SET_FEATURES)
+			&& (srb->cmnd[6] == SETFEATURES_XFER))
+		goto invalid_fld;
+
+	if (srb->cmnd[12] == ATA_CMD_ID_ATA || srb->cmnd[12] == ATA_CMD_ID_ATAPI)
+		srb->cmnd[2] |= (1<<7); /* set  IdentifyPacketDevice for these cmds */
+
+
+	usb_stor_transparent_scsi_command(srb, us);
+
+	/* if the device doesn't support ATACB */
+	if (srb->result == SAM_STAT_CHECK_CONDITION &&
+			memcmp(srb->sense_buffer, usb_stor_sense_invalidCDB,
+				sizeof(usb_stor_sense_invalidCDB)) == 0) {
+		usb_stor_dbg(us, "cypress atacb not supported ???\n");
+		goto end;
+	}
+
+	/*
+	 * if ck_cond flags is set, and there wasn't critical error,
+	 * build the special sense
+	 */
+	if ((srb->result != (DID_ERROR << 16) &&
+				srb->result != (DID_ABORT << 16)) &&
+			save_cmnd[2] & 0x20) {
+		struct scsi_eh_save ses;
+		unsigned char regs[8];
+		unsigned char *sb = srb->sense_buffer;
+		unsigned char *desc = sb + 8;
+		int tmp_result;
+
+		/* build the command for reading the ATA registers */
+		scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs));
+
+		/*
+		 * we use the same command as before, but we set
+		 * the read taskfile bit, for not executing atacb command,
+		 * but reading register selected in srb->cmnd[4]
+		 */
+		srb->cmd_len = 16;
+		srb->cmnd[2] = 1;
+
+		usb_stor_transparent_scsi_command(srb, us);
+		memcpy(regs, srb->sense_buffer, sizeof(regs));
+		tmp_result = srb->result;
+		scsi_eh_restore_cmnd(srb, &ses);
+		/* we fail to get registers, report invalid command */
+		if (tmp_result != SAM_STAT_GOOD)
+			goto invalid_fld;
+
+		/* build the sense */
+		memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
+
+		/* set sk, asc for a good command */
+		sb[1] = RECOVERED_ERROR;
+		sb[2] = 0; /* ATA PASS THROUGH INFORMATION AVAILABLE */
+		sb[3] = 0x1D;
+
+		/*
+		 * XXX we should generate sk, asc, ascq from status and error
+		 * regs
+		 * (see 11.1 Error translation ATA device error to SCSI error
+		 * map, and ata_to_sense_error from libata.)
+		 */
+
+		/* Sense data is current and format is descriptor. */
+		sb[0] = 0x72;
+		desc[0] = 0x09; /* ATA_RETURN_DESCRIPTOR */
+
+		/* set length of additional sense data */
+		sb[7] = 14;
+		desc[1] = 12;
+
+		/* Copy registers into sense buffer. */
+		desc[ 2] = 0x00;
+		desc[ 3] = regs[1];  /* features */
+		desc[ 5] = regs[2];  /* sector count */
+		desc[ 7] = regs[3];  /* lba low */
+		desc[ 9] = regs[4];  /* lba med */
+		desc[11] = regs[5];  /* lba high */
+		desc[12] = regs[6];  /* device */
+		desc[13] = regs[7];  /* command */
+
+		srb->result = SAM_STAT_CHECK_CONDITION;
+	}
+	goto end;
+invalid_fld:
+	srb->result = SAM_STAT_CHECK_CONDITION;
+
+	memcpy(srb->sense_buffer,
+			usb_stor_sense_invalidCDB,
+			sizeof(usb_stor_sense_invalidCDB));
+end:
+	memcpy(srb->cmnd, save_cmnd, sizeof(save_cmnd));
+	if (srb->cmnd[0] == ATA_12)
+		srb->cmd_len = 12;
+}
+
+static struct scsi_host_template cypress_host_template;
+
+static int cypress_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+	struct usb_device *device;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - cypress_usb_ids) + cypress_unusual_dev_list,
+			&cypress_host_template);
+	if (result)
+		return result;
+
+	/*
+	 * Among CY7C68300 chips, the A revision does not support Cypress ATACB
+	 * Filter out this revision from EEPROM default descriptor values
+	 */
+	device = interface_to_usbdev(intf);
+	if (device->descriptor.iManufacturer != 0x38 ||
+	    device->descriptor.iProduct != 0x4e ||
+	    device->descriptor.iSerialNumber != 0x64) {
+		us->protocol_name = "Transparent SCSI with Cypress ATACB";
+		us->proto_handler = cypress_atacb_passthrough;
+	} else {
+		us->protocol_name = "Transparent SCSI";
+		us->proto_handler = usb_stor_transparent_scsi_command;
+	}
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver cypress_driver = {
+	.name =		DRV_NAME,
+	.probe =	cypress_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	cypress_usb_ids,
+	.soft_unbind =	1,
+	.no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(cypress_driver, cypress_host_template, DRV_NAME);
diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c
new file mode 100644
index 000000000..bcc4a2fad
--- /dev/null
+++ b/drivers/usb/storage/datafab.c
@@ -0,0 +1,757 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Datafab USB Compact Flash reader
+ *
+ * datafab driver v0.1:
+ *
+ * First release
+ *
+ * Current development and maintenance by:
+ *   (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org)
+ *
+ *   Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver
+ *   which I used as a template for this driver.
+ *
+ *   Some bugfixes and scatter-gather code by Gregory P. Smith 
+ *   (greg-usb@electricrain.com)
+ *
+ *   Fix for media change by Joerg Schneider (js@joergschneider.com)
+ *
+ * Other contributors:
+ *   (c) 2002 Alan Stern <stern@rowland.org>
+ */
+
+/*
+ * This driver attempts to support USB CompactFlash reader/writer devices
+ * based on Datafab USB-to-ATA chips.  It was specifically developed for the 
+ * Datafab MDCFE-B USB CompactFlash reader but has since been found to work 
+ * with a variety of Datafab-based devices from a number of manufacturers.
+ * I've received a report of this driver working with a Datafab-based
+ * SmartMedia device though please be aware that I'm personally unable to
+ * test SmartMedia support.
+ *
+ * This driver supports reading and writing.  If you're truly paranoid,
+ * however, you can force the driver into a write-protected state by setting
+ * the WP enable bits in datafab_handle_mode_sense().  See the comments
+ * in that routine.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "scsiglue.h"
+
+#define DRV_NAME "ums-datafab"
+
+MODULE_DESCRIPTION("Driver for Datafab USB Compact Flash reader");
+MODULE_AUTHOR("Jimmie Mayfield <mayfield+datafab@sackheads.org>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(USB_STORAGE);
+
+struct datafab_info {
+	unsigned long   sectors;	/* total sector count */
+	unsigned long   ssize;		/* sector size in bytes */
+	signed char	lun;		/* used for dual-slot readers */
+
+	/* the following aren't used yet */
+	unsigned char   sense_key;
+	unsigned long   sense_asc;	/* additional sense code */
+	unsigned long   sense_ascq;	/* additional sense code qualifier */
+};
+
+static int datafab_determine_lun(struct us_data *us,
+				 struct datafab_info *info);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+static struct usb_device_id datafab_usb_ids[] = {
+#	include "unusual_datafab.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, datafab_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev datafab_unusual_dev_list[] = {
+#	include "unusual_datafab.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+static inline int
+datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) {
+	if (len == 0)
+		return USB_STOR_XFER_GOOD;
+
+	usb_stor_dbg(us, "len = %d\n", len);
+	return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+			data, len, NULL);
+}
+
+
+static inline int
+datafab_bulk_write(struct us_data *us, unsigned char *data, unsigned int len) {
+	if (len == 0)
+		return USB_STOR_XFER_GOOD;
+
+	usb_stor_dbg(us, "len = %d\n", len);
+	return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+			data, len, NULL);
+}
+
+
+static int datafab_read_data(struct us_data *us,
+			     struct datafab_info *info,
+			     u32 sector,
+			     u32 sectors)
+{
+	unsigned char *command = us->iobuf;
+	unsigned char *buffer;
+	unsigned char  thistime;
+	unsigned int totallen, alloclen;
+	int len, result;
+	unsigned int sg_offset = 0;
+	struct scatterlist *sg = NULL;
+
+	// we're working in LBA mode.  according to the ATA spec, 
+	// we can support up to 28-bit addressing.  I don't know if Datafab
+	// supports beyond 24-bit addressing.  It's kind of hard to test 
+	// since it requires > 8GB CF card.
+	//
+	if (sectors > 0x0FFFFFFF)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	if (info->lun == -1) {
+		result = datafab_determine_lun(us, info);
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			return result;
+	}
+
+	totallen = sectors * info->ssize;
+
+	// Since we don't read more than 64 KB at a time, we have to create
+	// a bounce buffer and move the data a piece at a time between the
+	// bounce buffer and the actual transfer buffer.
+
+	alloclen = min(totallen, 65536u);
+	buffer = kmalloc(alloclen, GFP_NOIO);
+	if (buffer == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	do {
+		// loop, never allocate or transfer more than 64k at once
+		// (min(128k, 255*info->ssize) is the real limit)
+
+		len = min(totallen, alloclen);
+		thistime = (len / info->ssize) & 0xff;
+
+		command[0] = 0;
+		command[1] = thistime;
+		command[2] = sector & 0xFF;
+		command[3] = (sector >> 8) & 0xFF;
+		command[4] = (sector >> 16) & 0xFF;
+
+		command[5] = 0xE0 + (info->lun << 4);
+		command[5] |= (sector >> 24) & 0x0F;
+		command[6] = 0x20;
+		command[7] = 0x01;
+
+		// send the read command
+		result = datafab_bulk_write(us, command, 8);
+		if (result != USB_STOR_XFER_GOOD)
+			goto leave;
+
+		// read the result
+		result = datafab_bulk_read(us, buffer, len);
+		if (result != USB_STOR_XFER_GOOD)
+			goto leave;
+
+		// Store the data in the transfer buffer
+		usb_stor_access_xfer_buf(buffer, len, us->srb,
+				 &sg, &sg_offset, TO_XFER_BUF);
+
+		sector += thistime;
+		totallen -= len;
+	} while (totallen > 0);
+
+	kfree(buffer);
+	return USB_STOR_TRANSPORT_GOOD;
+
+ leave:
+	kfree(buffer);
+	return USB_STOR_TRANSPORT_ERROR;
+}
+
+
+static int datafab_write_data(struct us_data *us,
+			      struct datafab_info *info,
+			      u32 sector,
+			      u32 sectors)
+{
+	unsigned char *command = us->iobuf;
+	unsigned char *reply = us->iobuf;
+	unsigned char *buffer;
+	unsigned char thistime;
+	unsigned int totallen, alloclen;
+	int len, result;
+	unsigned int sg_offset = 0;
+	struct scatterlist *sg = NULL;
+
+	// we're working in LBA mode.  according to the ATA spec, 
+	// we can support up to 28-bit addressing.  I don't know if Datafab
+	// supports beyond 24-bit addressing.  It's kind of hard to test 
+	// since it requires > 8GB CF card.
+	//
+	if (sectors > 0x0FFFFFFF)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	if (info->lun == -1) {
+		result = datafab_determine_lun(us, info);
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			return result;
+	}
+
+	totallen = sectors * info->ssize;
+
+	// Since we don't write more than 64 KB at a time, we have to create
+	// a bounce buffer and move the data a piece at a time between the
+	// bounce buffer and the actual transfer buffer.
+
+	alloclen = min(totallen, 65536u);
+	buffer = kmalloc(alloclen, GFP_NOIO);
+	if (buffer == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	do {
+		// loop, never allocate or transfer more than 64k at once
+		// (min(128k, 255*info->ssize) is the real limit)
+
+		len = min(totallen, alloclen);
+		thistime = (len / info->ssize) & 0xff;
+
+		// Get the data from the transfer buffer
+		usb_stor_access_xfer_buf(buffer, len, us->srb,
+				&sg, &sg_offset, FROM_XFER_BUF);
+
+		command[0] = 0;
+		command[1] = thistime;
+		command[2] = sector & 0xFF;
+		command[3] = (sector >> 8) & 0xFF;
+		command[4] = (sector >> 16) & 0xFF;
+
+		command[5] = 0xE0 + (info->lun << 4);
+		command[5] |= (sector >> 24) & 0x0F;
+		command[6] = 0x30;
+		command[7] = 0x02;
+
+		// send the command
+		result = datafab_bulk_write(us, command, 8);
+		if (result != USB_STOR_XFER_GOOD)
+			goto leave;
+
+		// send the data
+		result = datafab_bulk_write(us, buffer, len);
+		if (result != USB_STOR_XFER_GOOD)
+			goto leave;
+
+		// read the result
+		result = datafab_bulk_read(us, reply, 2);
+		if (result != USB_STOR_XFER_GOOD)
+			goto leave;
+
+		if (reply[0] != 0x50 && reply[1] != 0) {
+			usb_stor_dbg(us, "Gah! write return code: %02x %02x\n",
+				     reply[0], reply[1]);
+			goto leave;
+		}
+
+		sector += thistime;
+		totallen -= len;
+	} while (totallen > 0);
+
+	kfree(buffer);
+	return USB_STOR_TRANSPORT_GOOD;
+
+ leave:
+	kfree(buffer);
+	return USB_STOR_TRANSPORT_ERROR;
+}
+
+
+static int datafab_determine_lun(struct us_data *us,
+				 struct datafab_info *info)
+{
+	// Dual-slot readers can be thought of as dual-LUN devices.
+	// We need to determine which card slot is being used.
+	// We'll send an IDENTIFY DEVICE command and see which LUN responds...
+	//
+	// There might be a better way of doing this?
+
+	static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 };
+	unsigned char *command = us->iobuf;
+	unsigned char *buf;
+	int count = 0, rc;
+
+	if (!info)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	memcpy(command, scommand, 8);
+	buf = kmalloc(512, GFP_NOIO);
+	if (!buf)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	usb_stor_dbg(us, "locating...\n");
+
+	// we'll try 3 times before giving up...
+	//
+	while (count++ < 3) {
+		command[5] = 0xa0;
+
+		rc = datafab_bulk_write(us, command, 8);
+		if (rc != USB_STOR_XFER_GOOD) {
+			rc = USB_STOR_TRANSPORT_ERROR;
+			goto leave;
+		}
+
+		rc = datafab_bulk_read(us, buf, 512);
+		if (rc == USB_STOR_XFER_GOOD) {
+			info->lun = 0;
+			rc = USB_STOR_TRANSPORT_GOOD;
+			goto leave;
+		}
+
+		command[5] = 0xb0;
+
+		rc = datafab_bulk_write(us, command, 8);
+		if (rc != USB_STOR_XFER_GOOD) {
+			rc = USB_STOR_TRANSPORT_ERROR;
+			goto leave;
+		}
+
+		rc = datafab_bulk_read(us, buf, 512);
+		if (rc == USB_STOR_XFER_GOOD) {
+			info->lun = 1;
+			rc = USB_STOR_TRANSPORT_GOOD;
+			goto leave;
+		}
+
+		msleep(20);
+	}
+
+	rc = USB_STOR_TRANSPORT_ERROR;
+
+ leave:
+	kfree(buf);
+	return rc;
+}
+
+static int datafab_id_device(struct us_data *us,
+			     struct datafab_info *info)
+{
+	// this is a variation of the ATA "IDENTIFY DEVICE" command...according
+	// to the ATA spec, 'Sector Count' isn't used but the Windows driver
+	// sets this bit so we do too...
+	//
+	static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 };
+	unsigned char *command = us->iobuf;
+	unsigned char *reply;
+	int rc;
+
+	if (!info)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	if (info->lun == -1) {
+		rc = datafab_determine_lun(us, info);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+	}
+
+	memcpy(command, scommand, 8);
+	reply = kmalloc(512, GFP_NOIO);
+	if (!reply)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	command[5] += (info->lun << 4);
+
+	rc = datafab_bulk_write(us, command, 8);
+	if (rc != USB_STOR_XFER_GOOD) {
+		rc = USB_STOR_TRANSPORT_ERROR;
+		goto leave;
+	}
+
+	// we'll go ahead and extract the media capacity while we're here...
+	//
+	rc = datafab_bulk_read(us, reply, 512);
+	if (rc == USB_STOR_XFER_GOOD) {
+		// capacity is at word offset 57-58
+		//
+		info->sectors = ((u32)(reply[117]) << 24) | 
+				((u32)(reply[116]) << 16) |
+				((u32)(reply[115]) <<  8) | 
+				((u32)(reply[114])      );
+		rc = USB_STOR_TRANSPORT_GOOD;
+		goto leave;
+	}
+
+	rc = USB_STOR_TRANSPORT_ERROR;
+
+ leave:
+	kfree(reply);
+	return rc;
+}
+
+
+static int datafab_handle_mode_sense(struct us_data *us,
+				     struct scsi_cmnd * srb, 
+				     int sense_6)
+{
+	static unsigned char rw_err_page[12] = {
+		0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0
+	};
+	static unsigned char cache_page[12] = {
+		0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0
+	};
+	static unsigned char rbac_page[12] = {
+		0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0
+	};
+	static unsigned char timer_page[8] = {
+		0x1C, 0x6, 0, 0, 0, 0
+	};
+	unsigned char pc, page_code;
+	unsigned int i = 0;
+	struct datafab_info *info = (struct datafab_info *) (us->extra);
+	unsigned char *ptr = us->iobuf;
+
+	// most of this stuff is just a hack to get things working.  the
+	// datafab reader doesn't present a SCSI interface so we
+	// fudge the SCSI commands...
+	//
+
+	pc = srb->cmnd[2] >> 6;
+	page_code = srb->cmnd[2] & 0x3F;
+
+	switch (pc) {
+	   case 0x0:
+		   usb_stor_dbg(us, "Current values\n");
+		break;
+	   case 0x1:
+		   usb_stor_dbg(us, "Changeable values\n");
+		break;
+	   case 0x2:
+		   usb_stor_dbg(us, "Default values\n");
+		break;
+	   case 0x3:
+		   usb_stor_dbg(us, "Saves values\n");
+		break;
+	}
+
+	memset(ptr, 0, 8);
+	if (sense_6) {
+		ptr[2] = 0x00;		// WP enable: 0x80
+		i = 4;
+	} else {
+		ptr[3] = 0x00;		// WP enable: 0x80
+		i = 8;
+	}
+
+	switch (page_code) {
+	   default:
+		// vendor-specific mode
+		info->sense_key = 0x05;
+		info->sense_asc = 0x24;
+		info->sense_ascq = 0x00;
+		return USB_STOR_TRANSPORT_FAILED;
+
+	   case 0x1:
+		memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
+		i += sizeof(rw_err_page);
+		break;
+
+	   case 0x8:
+		memcpy(ptr + i, cache_page, sizeof(cache_page));
+		i += sizeof(cache_page);
+		break;
+
+	   case 0x1B:
+		memcpy(ptr + i, rbac_page, sizeof(rbac_page));
+		i += sizeof(rbac_page);
+		break;
+
+	   case 0x1C:
+		memcpy(ptr + i, timer_page, sizeof(timer_page));
+		i += sizeof(timer_page);
+		break;
+
+	   case 0x3F:		// retrieve all pages
+		memcpy(ptr + i, timer_page, sizeof(timer_page));
+		i += sizeof(timer_page);
+		memcpy(ptr + i, rbac_page, sizeof(rbac_page));
+		i += sizeof(rbac_page);
+		memcpy(ptr + i, cache_page, sizeof(cache_page));
+		i += sizeof(cache_page);
+		memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
+		i += sizeof(rw_err_page);
+		break;
+	}
+
+	if (sense_6)
+		ptr[0] = i - 1;
+	else
+		((__be16 *) ptr)[0] = cpu_to_be16(i - 2);
+	usb_stor_set_xfer_buf(ptr, i, srb);
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static void datafab_info_destructor(void *extra)
+{
+	// this routine is a placeholder...
+	// currently, we don't allocate any extra memory so we're okay
+}
+
+
+// Transport for the Datafab MDCFE-B
+//
+static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	struct datafab_info *info;
+	int rc;
+	unsigned long block, blocks;
+	unsigned char *ptr = us->iobuf;
+	static unsigned char inquiry_reply[8] = {
+		0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
+	};
+
+	if (!us->extra) {
+		us->extra = kzalloc(sizeof(struct datafab_info), GFP_NOIO);
+		if (!us->extra)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		us->extra_destructor = datafab_info_destructor;
+  		((struct datafab_info *)us->extra)->lun = -1;
+	}
+
+	info = (struct datafab_info *) (us->extra);
+
+	if (srb->cmnd[0] == INQUIRY) {
+		usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
+		memcpy(ptr, inquiry_reply, sizeof(inquiry_reply));
+		fill_inquiry_response(us, ptr, 36);
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == READ_CAPACITY) {
+		info->ssize = 0x200;  // hard coded 512 byte sectors as per ATA spec
+		rc = datafab_id_device(us, info);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+
+		usb_stor_dbg(us, "READ_CAPACITY:  %ld sectors, %ld bytes per sector\n",
+			     info->sectors, info->ssize);
+
+		// build the reply
+		// we need the last sector, not the number of sectors
+		((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
+		((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
+		usb_stor_set_xfer_buf(ptr, 8, srb);
+
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == MODE_SELECT_10) {
+		usb_stor_dbg(us, "Gah! MODE_SELECT_10\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	// don't bother implementing READ_6 or WRITE_6.
+	//
+	if (srb->cmnd[0] == READ_10) {
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+			((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+		usb_stor_dbg(us, "READ_10: read block 0x%04lx  count %ld\n",
+			     block, blocks);
+		return datafab_read_data(us, info, block, blocks);
+	}
+
+	if (srb->cmnd[0] == READ_12) {
+		// we'll probably never see a READ_12 but we'll do it anyway...
+		//
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+			((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+			 ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));
+
+		usb_stor_dbg(us, "READ_12: read block 0x%04lx  count %ld\n",
+			     block, blocks);
+		return datafab_read_data(us, info, block, blocks);
+	}
+
+	if (srb->cmnd[0] == WRITE_10) {
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+			((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+		usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n",
+			     block, blocks);
+		return datafab_write_data(us, info, block, blocks);
+	}
+
+	if (srb->cmnd[0] == WRITE_12) {
+		// we'll probably never see a WRITE_12 but we'll do it anyway...
+		//
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+			((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+			 ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));
+
+		usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n",
+			     block, blocks);
+		return datafab_write_data(us, info, block, blocks);
+	}
+
+	if (srb->cmnd[0] == TEST_UNIT_READY) {
+		usb_stor_dbg(us, "TEST_UNIT_READY\n");
+		return datafab_id_device(us, info);
+	}
+
+	if (srb->cmnd[0] == REQUEST_SENSE) {
+		usb_stor_dbg(us, "REQUEST_SENSE - Returning faked response\n");
+
+		// this response is pretty bogus right now.  eventually if necessary
+		// we can set the correct sense data.  so far though it hasn't been
+		// necessary
+		//
+		memset(ptr, 0, 18);
+		ptr[0] = 0xF0;
+		ptr[2] = info->sense_key;
+		ptr[7] = 11;
+		ptr[12] = info->sense_asc;
+		ptr[13] = info->sense_ascq;
+		usb_stor_set_xfer_buf(ptr, 18, srb);
+
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == MODE_SENSE) {
+		usb_stor_dbg(us, "MODE_SENSE_6 detected\n");
+		return datafab_handle_mode_sense(us, srb, 1);
+	}
+
+	if (srb->cmnd[0] == MODE_SENSE_10) {
+		usb_stor_dbg(us, "MODE_SENSE_10 detected\n");
+		return datafab_handle_mode_sense(us, srb, 0);
+	}
+
+	if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+		/*
+		 * sure.  whatever.  not like we can stop the user from
+		 * popping the media out of the device (no locking doors, etc)
+		 */
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == START_STOP) {
+		/*
+		 * this is used by sd.c'check_scsidisk_media_change to detect
+		 * media change
+		 */
+		usb_stor_dbg(us, "START_STOP\n");
+		/*
+		 * the first datafab_id_device after a media change returns
+		 * an error (determined experimentally)
+		 */
+		rc = datafab_id_device(us, info);
+		if (rc == USB_STOR_TRANSPORT_GOOD) {
+			info->sense_key = NO_SENSE;
+			srb->result = SUCCESS;
+		} else {
+			info->sense_key = UNIT_ATTENTION;
+			srb->result = SAM_STAT_CHECK_CONDITION;
+		}
+		return rc;
+	}
+
+	usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
+		     srb->cmnd[0], srb->cmnd[0]);
+	info->sense_key = 0x05;
+	info->sense_asc = 0x20;
+	info->sense_ascq = 0x00;
+	return USB_STOR_TRANSPORT_FAILED;
+}
+
+static struct scsi_host_template datafab_host_template;
+
+static int datafab_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - datafab_usb_ids) + datafab_unusual_dev_list,
+			&datafab_host_template);
+	if (result)
+		return result;
+
+	us->transport_name  = "Datafab Bulk-Only";
+	us->transport = datafab_transport;
+	us->transport_reset = usb_stor_Bulk_reset;
+	us->max_lun = 1;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver datafab_driver = {
+	.name =		DRV_NAME,
+	.probe =	datafab_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	datafab_usb_ids,
+	.soft_unbind =	1,
+	.no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(datafab_driver, datafab_host_template, DRV_NAME);
diff --git a/drivers/usb/storage/debug.c b/drivers/usb/storage/debug.c
new file mode 100644
index 000000000..576be66ad
--- /dev/null
+++ b/drivers/usb/storage/debug.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for USB Mass Storage compliant devices
+ * Debugging Functions Source Code File
+ *
+ * Current development and maintenance by:
+ *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Developed with the assistance of:
+ *   (c) 2002 Alan Stern <stern@rowland.org>
+ *
+ * Initial work by:
+ *   (c) 1999 Michael Gee (michael@linuxspecific.com)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices.  Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document.  The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ */
+
+#include <linux/device.h>
+#include <linux/cdrom.h>
+#include <linux/export.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_dbg.h>
+
+#include "usb.h"
+#include "debug.h"
+
+
+void usb_stor_show_command(const struct us_data *us, struct scsi_cmnd *srb)
+{
+	char *what = NULL;
+
+	switch (srb->cmnd[0]) {
+	case TEST_UNIT_READY: what = "TEST_UNIT_READY"; break;
+	case REZERO_UNIT: what = "REZERO_UNIT"; break;
+	case REQUEST_SENSE: what = "REQUEST_SENSE"; break;
+	case FORMAT_UNIT: what = "FORMAT_UNIT"; break;
+	case READ_BLOCK_LIMITS: what = "READ_BLOCK_LIMITS"; break;
+	case REASSIGN_BLOCKS: what = "REASSIGN_BLOCKS"; break;
+	case READ_6: what = "READ_6"; break;
+	case WRITE_6: what = "WRITE_6"; break;
+	case SEEK_6: what = "SEEK_6"; break;
+	case READ_REVERSE: what = "READ_REVERSE"; break;
+	case WRITE_FILEMARKS: what = "WRITE_FILEMARKS"; break;
+	case SPACE: what = "SPACE"; break;
+	case INQUIRY: what = "INQUIRY"; break;
+	case RECOVER_BUFFERED_DATA: what = "RECOVER_BUFFERED_DATA"; break;
+	case MODE_SELECT: what = "MODE_SELECT"; break;
+	case RESERVE: what = "RESERVE"; break;
+	case RELEASE: what = "RELEASE"; break;
+	case COPY: what = "COPY"; break;
+	case ERASE: what = "ERASE"; break;
+	case MODE_SENSE: what = "MODE_SENSE"; break;
+	case START_STOP: what = "START_STOP"; break;
+	case RECEIVE_DIAGNOSTIC: what = "RECEIVE_DIAGNOSTIC"; break;
+	case SEND_DIAGNOSTIC: what = "SEND_DIAGNOSTIC"; break;
+	case ALLOW_MEDIUM_REMOVAL: what = "ALLOW_MEDIUM_REMOVAL"; break;
+	case SET_WINDOW: what = "SET_WINDOW"; break;
+	case READ_CAPACITY: what = "READ_CAPACITY"; break;
+	case READ_10: what = "READ_10"; break;
+	case WRITE_10: what = "WRITE_10"; break;
+	case SEEK_10: what = "SEEK_10"; break;
+	case WRITE_VERIFY: what = "WRITE_VERIFY"; break;
+	case VERIFY: what = "VERIFY"; break;
+	case SEARCH_HIGH: what = "SEARCH_HIGH"; break;
+	case SEARCH_EQUAL: what = "SEARCH_EQUAL"; break;
+	case SEARCH_LOW: what = "SEARCH_LOW"; break;
+	case SET_LIMITS: what = "SET_LIMITS"; break;
+	case READ_POSITION: what = "READ_POSITION"; break;
+	case SYNCHRONIZE_CACHE: what = "SYNCHRONIZE_CACHE"; break;
+	case LOCK_UNLOCK_CACHE: what = "LOCK_UNLOCK_CACHE"; break;
+	case READ_DEFECT_DATA: what = "READ_DEFECT_DATA"; break;
+	case MEDIUM_SCAN: what = "MEDIUM_SCAN"; break;
+	case COMPARE: what = "COMPARE"; break;
+	case COPY_VERIFY: what = "COPY_VERIFY"; break;
+	case WRITE_BUFFER: what = "WRITE_BUFFER"; break;
+	case READ_BUFFER: what = "READ_BUFFER"; break;
+	case UPDATE_BLOCK: what = "UPDATE_BLOCK"; break;
+	case READ_LONG: what = "READ_LONG"; break;
+	case WRITE_LONG: what = "WRITE_LONG"; break;
+	case CHANGE_DEFINITION: what = "CHANGE_DEFINITION"; break;
+	case WRITE_SAME: what = "WRITE_SAME"; break;
+	case GPCMD_READ_SUBCHANNEL: what = "READ SUBCHANNEL"; break;
+	case READ_TOC: what = "READ_TOC"; break;
+	case GPCMD_READ_HEADER: what = "READ HEADER"; break;
+	case GPCMD_PLAY_AUDIO_10: what = "PLAY AUDIO (10)"; break;
+	case GPCMD_PLAY_AUDIO_MSF: what = "PLAY AUDIO MSF"; break;
+	case GPCMD_GET_EVENT_STATUS_NOTIFICATION:
+		what = "GET EVENT/STATUS NOTIFICATION"; break;
+	case GPCMD_PAUSE_RESUME: what = "PAUSE/RESUME"; break;
+	case LOG_SELECT: what = "LOG_SELECT"; break;
+	case LOG_SENSE: what = "LOG_SENSE"; break;
+	case GPCMD_STOP_PLAY_SCAN: what = "STOP PLAY/SCAN"; break;
+	case GPCMD_READ_DISC_INFO: what = "READ DISC INFORMATION"; break;
+	case GPCMD_READ_TRACK_RZONE_INFO:
+		what = "READ TRACK INFORMATION"; break;
+	case GPCMD_RESERVE_RZONE_TRACK: what = "RESERVE TRACK"; break;
+	case GPCMD_SEND_OPC: what = "SEND OPC"; break;
+	case MODE_SELECT_10: what = "MODE_SELECT_10"; break;
+	case GPCMD_REPAIR_RZONE_TRACK: what = "REPAIR TRACK"; break;
+	case 0x59: what = "READ MASTER CUE"; break;
+	case MODE_SENSE_10: what = "MODE_SENSE_10"; break;
+	case GPCMD_CLOSE_TRACK: what = "CLOSE TRACK/SESSION"; break;
+	case 0x5C: what = "READ BUFFER CAPACITY"; break;
+	case 0x5D: what = "SEND CUE SHEET"; break;
+	case GPCMD_BLANK: what = "BLANK"; break;
+	case REPORT_LUNS: what = "REPORT LUNS"; break;
+	case MOVE_MEDIUM: what = "MOVE_MEDIUM or PLAY AUDIO (12)"; break;
+	case READ_12: what = "READ_12"; break;
+	case WRITE_12: what = "WRITE_12"; break;
+	case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break;
+	case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break;
+	case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break;
+	case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break;
+	case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break;
+	case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break;
+	case GPCMD_READ_CD_MSF: what = "READ CD MSF"; break;
+	case GPCMD_SCAN: what = "SCAN"; break;
+	case GPCMD_SET_SPEED: what = "SET CD SPEED"; break;
+	case GPCMD_MECHANISM_STATUS: what = "MECHANISM STATUS"; break;
+	case GPCMD_READ_CD: what = "READ CD"; break;
+	case 0xE1: what = "WRITE CONTINUE"; break;
+	case WRITE_LONG_2: what = "WRITE_LONG_2"; break;
+	default: what = "(unknown command)"; break;
+	}
+	usb_stor_dbg(us, "Command %s (%d bytes)\n", what, srb->cmd_len);
+	usb_stor_dbg(us, "bytes: %*ph\n", min_t(int, srb->cmd_len, 16),
+		     (const unsigned char *)srb->cmnd);
+}
+
+void usb_stor_show_sense(const struct us_data *us,
+			 unsigned char key,
+			 unsigned char asc,
+			 unsigned char ascq)
+{
+	const char *what, *keystr, *fmt;
+
+	keystr = scsi_sense_key_string(key);
+	what = scsi_extd_sense_format(asc, ascq, &fmt);
+
+	if (keystr == NULL)
+		keystr = "(Unknown Key)";
+	if (what == NULL)
+		what = "(unknown ASC/ASCQ)";
+
+	if (fmt)
+		usb_stor_dbg(us, "%s: %s (%s%x)\n", keystr, what, fmt, ascq);
+	else
+		usb_stor_dbg(us, "%s: %s\n", keystr, what);
+}
+
+void usb_stor_dbg(const struct us_data *us, const char *fmt, ...)
+{
+	va_list args;
+
+	va_start(args, fmt);
+
+	dev_vprintk_emit(LOGLEVEL_DEBUG, &us->pusb_dev->dev, fmt, args);
+
+	va_end(args);
+}
+EXPORT_SYMBOL_GPL(usb_stor_dbg);
diff --git a/drivers/usb/storage/debug.h b/drivers/usb/storage/debug.h
new file mode 100644
index 000000000..a6505ceb6
--- /dev/null
+++ b/drivers/usb/storage/debug.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Driver for USB Mass Storage compliant devices
+ * Debugging Functions Header File
+ *
+ * Current development and maintenance by:
+ *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Initial work by:
+ *   (c) 1999 Michael Gee (michael@linuxspecific.com)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices.  Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document.  The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ */
+
+#ifndef _DEBUG_H_
+#define _DEBUG_H_
+
+#include <linux/kernel.h>
+
+#ifdef CONFIG_USB_STORAGE_DEBUG
+void usb_stor_show_command(const struct us_data *us, struct scsi_cmnd *srb);
+void usb_stor_show_sense(const struct us_data *us, unsigned char key,
+			 unsigned char asc, unsigned char ascq);
+__printf(2, 3) void usb_stor_dbg(const struct us_data *us,
+				 const char *fmt, ...);
+
+#define US_DEBUG(x)		x
+#else
+__printf(2, 3)
+static inline void _usb_stor_dbg(const struct us_data *us,
+				 const char *fmt, ...)
+{
+}
+#define usb_stor_dbg(us, fmt, ...)				\
+	do { if (0) _usb_stor_dbg(us, fmt, ##__VA_ARGS__); } while (0)
+#define US_DEBUG(x)
+#endif
+
+#endif
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
new file mode 100644
index 000000000..97c66c0d9
--- /dev/null
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -0,0 +1,2441 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include <linux/firmware.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "scsiglue.h"
+
+#define SD_INIT1_FIRMWARE "ene-ub6250/sd_init1.bin"
+#define SD_INIT2_FIRMWARE "ene-ub6250/sd_init2.bin"
+#define SD_RW_FIRMWARE "ene-ub6250/sd_rdwr.bin"
+#define MS_INIT_FIRMWARE "ene-ub6250/ms_init.bin"
+#define MSP_RW_FIRMWARE "ene-ub6250/msp_rdwr.bin"
+#define MS_RW_FIRMWARE "ene-ub6250/ms_rdwr.bin"
+
+#define DRV_NAME "ums_eneub6250"
+
+MODULE_DESCRIPTION("Driver for ENE UB6250 reader");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(USB_STORAGE);
+MODULE_FIRMWARE(SD_INIT1_FIRMWARE);
+MODULE_FIRMWARE(SD_INIT2_FIRMWARE);
+MODULE_FIRMWARE(SD_RW_FIRMWARE);
+MODULE_FIRMWARE(MS_INIT_FIRMWARE);
+MODULE_FIRMWARE(MSP_RW_FIRMWARE);
+MODULE_FIRMWARE(MS_RW_FIRMWARE);
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+	.driver_info = (flags)}
+
+static struct usb_device_id ene_ub6250_usb_ids[] = {
+#	include "unusual_ene_ub6250.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, ene_ub6250_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev ene_ub6250_unusual_dev_list[] = {
+#	include "unusual_ene_ub6250.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+
+/* ENE bin code len */
+#define ENE_BIN_CODE_LEN    0x800
+/* EnE HW Register */
+#define REG_CARD_STATUS     0xFF83
+#define REG_HW_TRAP1        0xFF89
+
+/* SRB Status */
+#define SS_SUCCESS		0x000000	/* No Sense */
+#define SS_NOT_READY		0x023A00	/* Medium not present */
+#define SS_MEDIUM_ERR		0x031100	/* Unrecovered read error */
+#define SS_HW_ERR		0x040800	/* Communication failure */
+#define SS_ILLEGAL_REQUEST	0x052000	/* Invalid command */
+#define SS_UNIT_ATTENTION	0x062900	/* Reset occurred */
+
+/* ENE Load FW Pattern */
+#define SD_INIT1_PATTERN   1
+#define SD_INIT2_PATTERN   2
+#define SD_RW_PATTERN      3
+#define MS_INIT_PATTERN    4
+#define MSP_RW_PATTERN     5
+#define MS_RW_PATTERN      6
+#define SM_INIT_PATTERN    7
+#define SM_RW_PATTERN      8
+
+#define FDIR_WRITE         0
+#define FDIR_READ          1
+
+/* For MS Card */
+
+/* Status Register 1 */
+#define MS_REG_ST1_MB           0x80    /* media busy */
+#define MS_REG_ST1_FB1          0x40    /* flush busy 1 */
+#define MS_REG_ST1_DTER         0x20    /* error on data(corrected) */
+#define MS_REG_ST1_UCDT         0x10    /* unable to correct data */
+#define MS_REG_ST1_EXER         0x08    /* error on extra(corrected) */
+#define MS_REG_ST1_UCEX         0x04    /* unable to correct extra */
+#define MS_REG_ST1_FGER         0x02    /* error on overwrite flag(corrected) */
+#define MS_REG_ST1_UCFG         0x01    /* unable to correct overwrite flag */
+#define MS_REG_ST1_DEFAULT	(MS_REG_ST1_MB | MS_REG_ST1_FB1 | MS_REG_ST1_DTER | MS_REG_ST1_UCDT | MS_REG_ST1_EXER | MS_REG_ST1_UCEX | MS_REG_ST1_FGER | MS_REG_ST1_UCFG)
+
+/* Overwrite Area */
+#define MS_REG_OVR_BKST		0x80            /* block status */
+#define MS_REG_OVR_BKST_OK	MS_REG_OVR_BKST     /* OK */
+#define MS_REG_OVR_BKST_NG	0x00            /* NG */
+#define MS_REG_OVR_PGST0	0x40            /* page status */
+#define MS_REG_OVR_PGST1	0x20
+#define MS_REG_OVR_PGST_MASK	(MS_REG_OVR_PGST0 | MS_REG_OVR_PGST1)
+#define MS_REG_OVR_PGST_OK	(MS_REG_OVR_PGST0 | MS_REG_OVR_PGST1) /* OK */
+#define MS_REG_OVR_PGST_NG	MS_REG_OVR_PGST1                      /* NG */
+#define MS_REG_OVR_PGST_DATA_ERROR	0x00        /* data error */
+#define MS_REG_OVR_UDST			0x10        /* update status */
+#define MS_REG_OVR_UDST_UPDATING	0x00        /* updating */
+#define MS_REG_OVR_UDST_NO_UPDATE	MS_REG_OVR_UDST
+#define MS_REG_OVR_RESERVED	0x08
+#define MS_REG_OVR_DEFAULT	(MS_REG_OVR_BKST_OK | MS_REG_OVR_PGST_OK | MS_REG_OVR_UDST_NO_UPDATE | MS_REG_OVR_RESERVED)
+
+/* Management Flag */
+#define MS_REG_MNG_SCMS0	0x20    /* serial copy management system */
+#define MS_REG_MNG_SCMS1	0x10
+#define MS_REG_MNG_SCMS_MASK		(MS_REG_MNG_SCMS0 | MS_REG_MNG_SCMS1)
+#define MS_REG_MNG_SCMS_COPY_OK		(MS_REG_MNG_SCMS0 | MS_REG_MNG_SCMS1)
+#define MS_REG_MNG_SCMS_ONE_COPY	MS_REG_MNG_SCMS1
+#define MS_REG_MNG_SCMS_NO_COPY	0x00
+#define MS_REG_MNG_ATFLG	0x08    /* address transfer table flag */
+#define MS_REG_MNG_ATFLG_OTHER	MS_REG_MNG_ATFLG    /* other */
+#define MS_REG_MNG_ATFLG_ATTBL	0x00	/* address transfer table */
+#define MS_REG_MNG_SYSFLG	0x04	/* system flag */
+#define MS_REG_MNG_SYSFLG_USER	MS_REG_MNG_SYSFLG   /* user block */
+#define MS_REG_MNG_SYSFLG_BOOT	0x00	/* system block */
+#define MS_REG_MNG_RESERVED	0xc3
+#define MS_REG_MNG_DEFAULT	(MS_REG_MNG_SCMS_COPY_OK | MS_REG_MNG_ATFLG_OTHER | MS_REG_MNG_SYSFLG_USER | MS_REG_MNG_RESERVED)
+
+
+#define MS_MAX_PAGES_PER_BLOCK		32
+#define MS_MAX_INITIAL_ERROR_BLOCKS 	10
+#define MS_LIB_BITS_PER_BYTE		8
+
+#define MS_SYSINF_FORMAT_FAT		1
+#define MS_SYSINF_USAGE_GENERAL		0
+
+#define MS_SYSINF_MSCLASS_TYPE_1	1
+#define MS_SYSINF_PAGE_SIZE		MS_BYTES_PER_PAGE /* fixed */
+
+#define MS_SYSINF_CARDTYPE_RDONLY	1
+#define MS_SYSINF_CARDTYPE_RDWR		2
+#define MS_SYSINF_CARDTYPE_HYBRID	3
+#define MS_SYSINF_SECURITY		0x01
+#define MS_SYSINF_SECURITY_NO_SUPPORT	MS_SYSINF_SECURITY
+#define MS_SYSINF_SECURITY_SUPPORT	0
+
+#define MS_SYSINF_RESERVED1		1
+#define MS_SYSINF_RESERVED2		1
+
+#define MS_SYSENT_TYPE_INVALID_BLOCK	0x01
+#define MS_SYSENT_TYPE_CIS_IDI		0x0a    /* CIS/IDI */
+
+#define SIZE_OF_KIRO		1024
+#define BYTE_MASK		0xff
+
+/* ms error code */
+#define MS_STATUS_WRITE_PROTECT	0x0106
+#define MS_STATUS_SUCCESS	0x0000
+#define MS_ERROR_FLASH_READ	0x8003
+#define MS_ERROR_FLASH_ERASE	0x8005
+#define MS_LB_ERROR		0xfff0
+#define MS_LB_BOOT_BLOCK	0xfff1
+#define MS_LB_INITIAL_ERROR	0xfff2
+#define MS_STATUS_SUCCESS_WITH_ECC 0xfff3
+#define MS_LB_ACQUIRED_ERROR	0xfff4
+#define MS_LB_NOT_USED_ERASED	0xfff5
+#define MS_NOCARD_ERROR		0xfff8
+#define MS_NO_MEMORY_ERROR	0xfff9
+#define MS_STATUS_INT_ERROR	0xfffa
+#define MS_STATUS_ERROR		0xfffe
+#define MS_LB_NOT_USED		0xffff
+
+#define MS_REG_MNG_SYSFLG	0x04    /* system flag */
+#define MS_REG_MNG_SYSFLG_USER	MS_REG_MNG_SYSFLG   /* user block */
+
+#define MS_BOOT_BLOCK_ID                        0x0001
+#define MS_BOOT_BLOCK_FORMAT_VERSION            0x0100
+#define MS_BOOT_BLOCK_DATA_ENTRIES              2
+
+#define MS_NUMBER_OF_SYSTEM_ENTRY       	4
+#define MS_NUMBER_OF_BOOT_BLOCK			2
+#define MS_BYTES_PER_PAGE			512
+#define MS_LOGICAL_BLOCKS_PER_SEGMENT		496
+#define MS_LOGICAL_BLOCKS_IN_1ST_SEGMENT        494
+
+#define MS_PHYSICAL_BLOCKS_PER_SEGMENT		0x200 /* 512 */
+#define MS_PHYSICAL_BLOCKS_PER_SEGMENT_MASK     0x1ff
+
+/* overwrite area */
+#define MS_REG_OVR_BKST		0x80		/* block status */
+#define MS_REG_OVR_BKST_OK	MS_REG_OVR_BKST	/* OK */
+#define MS_REG_OVR_BKST_NG	0x00            /* NG */
+
+/* Status Register 1 */
+#define MS_REG_ST1_DTER		0x20	/* error on data(corrected) */
+#define MS_REG_ST1_EXER		0x08	/* error on extra(corrected) */
+#define MS_REG_ST1_FGER		0x02	/* error on overwrite flag(corrected) */
+
+/* MemoryStick Register */
+/* Status Register 0 */
+#define MS_REG_ST0_WP		0x01	/* write protected */
+#define MS_REG_ST0_WP_ON	MS_REG_ST0_WP
+
+#define MS_LIB_CTRL_RDONLY      0
+#define MS_LIB_CTRL_WRPROTECT   1
+
+/*dphy->log table */
+#define ms_libconv_to_logical(pdx, PhyBlock) (((PhyBlock) >= (pdx)->MS_Lib.NumberOfPhyBlock) ? MS_STATUS_ERROR : (pdx)->MS_Lib.Phy2LogMap[PhyBlock])
+#define ms_libconv_to_physical(pdx, LogBlock) (((LogBlock) >= (pdx)->MS_Lib.NumberOfLogBlock) ? MS_STATUS_ERROR : (pdx)->MS_Lib.Log2PhyMap[LogBlock])
+
+#define ms_lib_ctrl_set(pdx, Flag)	((pdx)->MS_Lib.flags |= (1 << (Flag)))
+#define ms_lib_ctrl_reset(pdx, Flag)	((pdx)->MS_Lib.flags &= ~(1 << (Flag)))
+#define ms_lib_ctrl_check(pdx, Flag)	((pdx)->MS_Lib.flags & (1 << (Flag)))
+
+#define ms_lib_iswritable(pdx) ((ms_lib_ctrl_check((pdx), MS_LIB_CTRL_RDONLY) == 0) && (ms_lib_ctrl_check(pdx, MS_LIB_CTRL_WRPROTECT) == 0))
+#define ms_lib_clear_pagemap(pdx) memset((pdx)->MS_Lib.pagemap, 0, sizeof((pdx)->MS_Lib.pagemap))
+#define memstick_logaddr(logadr1, logadr0) ((((u16)(logadr1)) << 8) | (logadr0))
+
+
+/* SD_STATUS bits */
+#define SD_Insert	BIT(0)
+#define SD_Ready	BIT(1)
+#define SD_MediaChange	BIT(2)
+#define SD_IsMMC	BIT(3)
+#define SD_HiCapacity	BIT(4)
+#define SD_HiSpeed	BIT(5)
+#define SD_WtP		BIT(6)
+			/* Bit 7 reserved */
+
+/* MS_STATUS bits */
+#define MS_Insert	BIT(0)
+#define MS_Ready	BIT(1)
+#define MS_MediaChange	BIT(2)
+#define MS_IsMSPro	BIT(3)
+#define MS_IsMSPHG	BIT(4)
+			/* Bit 5 reserved */
+#define MS_WtP		BIT(6)
+			/* Bit 7 reserved */
+
+/* SM_STATUS bits */
+#define SM_Insert	BIT(0)
+#define SM_Ready	BIT(1)
+#define SM_MediaChange	BIT(2)
+			/* Bits 3-5 reserved */
+#define SM_WtP		BIT(6)
+#define SM_IsMS		BIT(7)
+
+struct ms_bootblock_cis {
+	u8 bCistplDEVICE[6];    /* 0 */
+	u8 bCistplDEVICE0C[6];  /* 6 */
+	u8 bCistplJEDECC[4];    /* 12 */
+	u8 bCistplMANFID[6];    /* 16 */
+	u8 bCistplVER1[32];     /* 22 */
+	u8 bCistplFUNCID[4];    /* 54 */
+	u8 bCistplFUNCE0[4];    /* 58 */
+	u8 bCistplFUNCE1[5];    /* 62 */
+	u8 bCistplCONF[7];      /* 67 */
+	u8 bCistplCFTBLENT0[10];/* 74 */
+	u8 bCistplCFTBLENT1[8]; /* 84 */
+	u8 bCistplCFTBLENT2[12];/* 92 */
+	u8 bCistplCFTBLENT3[8]; /* 104 */
+	u8 bCistplCFTBLENT4[17];/* 112 */
+	u8 bCistplCFTBLENT5[8]; /* 129 */
+	u8 bCistplCFTBLENT6[17];/* 137 */
+	u8 bCistplCFTBLENT7[8]; /* 154 */
+	u8 bCistplNOLINK[3];    /* 162 */
+} ;
+
+struct ms_bootblock_idi {
+#define MS_IDI_GENERAL_CONF 0x848A
+	u16 wIDIgeneralConfiguration;	/* 0 */
+	u16 wIDInumberOfCylinder;	/* 1 */
+	u16 wIDIreserved0;		/* 2 */
+	u16 wIDInumberOfHead;		/* 3 */
+	u16 wIDIbytesPerTrack;		/* 4 */
+	u16 wIDIbytesPerSector;		/* 5 */
+	u16 wIDIsectorsPerTrack;	/* 6 */
+	u16 wIDItotalSectors[2];	/* 7-8  high,low */
+	u16 wIDIreserved1[11];		/* 9-19 */
+	u16 wIDIbufferType;		/* 20 */
+	u16 wIDIbufferSize;		/* 21 */
+	u16 wIDIlongCmdECC;		/* 22 */
+	u16 wIDIfirmVersion[4];		/* 23-26 */
+	u16 wIDImodelName[20];		/* 27-46 */
+	u16 wIDIreserved2;		/* 47 */
+	u16 wIDIlongWordSupported;	/* 48 */
+	u16 wIDIdmaSupported;		/* 49 */
+	u16 wIDIreserved3;		/* 50 */
+	u16 wIDIpioTiming;		/* 51 */
+	u16 wIDIdmaTiming;		/* 52 */
+	u16 wIDItransferParameter;	/* 53 */
+	u16 wIDIformattedCylinder;	/* 54 */
+	u16 wIDIformattedHead;		/* 55 */
+	u16 wIDIformattedSectorsPerTrack;/* 56 */
+	u16 wIDIformattedTotalSectors[2];/* 57-58 */
+	u16 wIDImultiSector;		/* 59 */
+	u16 wIDIlbaSectors[2];		/* 60-61 */
+	u16 wIDIsingleWordDMA;		/* 62 */
+	u16 wIDImultiWordDMA;		/* 63 */
+	u16 wIDIreserved4[192];		/* 64-255 */
+};
+
+struct ms_bootblock_sysent_rec {
+	u32 dwStart;
+	u32 dwSize;
+	u8 bType;
+	u8 bReserved[3];
+};
+
+struct ms_bootblock_sysent {
+	struct ms_bootblock_sysent_rec entry[MS_NUMBER_OF_SYSTEM_ENTRY];
+};
+
+struct ms_bootblock_sysinf {
+	u8 bMsClass;			/* must be 1 */
+	u8 bCardType;			/* see below */
+	u16 wBlockSize;			/* n KB */
+	u16 wBlockNumber;		/* number of physical block */
+	u16 wTotalBlockNumber;		/* number of logical block */
+	u16 wPageSize;			/* must be 0x200 */
+	u8 bExtraSize;			/* 0x10 */
+	u8 bSecuritySupport;
+	u8 bAssemblyDate[8];
+	u8 bFactoryArea[4];
+	u8 bAssemblyMakerCode;
+	u8 bAssemblyMachineCode[3];
+	u16 wMemoryMakerCode;
+	u16 wMemoryDeviceCode;
+	u16 wMemorySize;
+	u8 bReserved1;
+	u8 bReserved2;
+	u8 bVCC;
+	u8 bVPP;
+	u16 wControllerChipNumber;
+	u16 wControllerFunction;	/* New MS */
+	u8 bReserved3[9];		/* New MS */
+	u8 bParallelSupport;		/* New MS */
+	u16 wFormatValue;		/* New MS */
+	u8 bFormatType;
+	u8 bUsage;
+	u8 bDeviceType;
+	u8 bReserved4[22];
+	u8 bFUValue3;
+	u8 bFUValue4;
+	u8 bReserved5[15];
+};
+
+struct ms_bootblock_header {
+	u16 wBlockID;
+	u16 wFormatVersion;
+	u8 bReserved1[184];
+	u8 bNumberOfDataEntry;
+	u8 bReserved2[179];
+};
+
+struct ms_bootblock_page0 {
+	struct ms_bootblock_header header;
+	struct ms_bootblock_sysent sysent;
+	struct ms_bootblock_sysinf sysinf;
+};
+
+struct ms_bootblock_cis_idi {
+	union {
+		struct ms_bootblock_cis cis;
+		u8 dmy[256];
+	} cis;
+
+	union {
+		struct ms_bootblock_idi idi;
+		u8 dmy[256];
+	} idi;
+
+};
+
+/* ENE MS Lib struct */
+struct ms_lib_type_extdat {
+	u8 reserved;
+	u8 intr;
+	u8 status0;
+	u8 status1;
+	u8 ovrflg;
+	u8 mngflg;
+	u16 logadr;
+};
+
+struct ms_lib_ctrl {
+	u32 flags;
+	u32 BytesPerSector;
+	u32 NumberOfCylinder;
+	u32 SectorsPerCylinder;
+	u16 cardType;			/* R/W, RO, Hybrid */
+	u16 blockSize;
+	u16 PagesPerBlock;
+	u16 NumberOfPhyBlock;
+	u16 NumberOfLogBlock;
+	u16 NumberOfSegment;
+	u16 *Phy2LogMap;		/* phy2log table */
+	u16 *Log2PhyMap;		/* log2phy table */
+	u16 wrtblk;
+	unsigned char *pagemap[(MS_MAX_PAGES_PER_BLOCK + (MS_LIB_BITS_PER_BYTE-1)) / MS_LIB_BITS_PER_BYTE];
+	unsigned char *blkpag;
+	struct ms_lib_type_extdat *blkext;
+	unsigned char copybuf[512];
+};
+
+
+/* SD Block Length */
+/* 2^9 = 512 Bytes, The HW maximum read/write data length */
+#define SD_BLOCK_LEN  9
+
+struct ene_ub6250_info {
+
+	/* I/O bounce buffer */
+	u8		*bbuf;
+
+	/* for 6250 code */
+	u8		SD_Status;
+	u8		MS_Status;
+	u8		SM_Status;
+
+	/* ----- SD Control Data ---------------- */
+	/*SD_REGISTER SD_Regs; */
+	u16		SD_Block_Mult;
+	u8		SD_READ_BL_LEN;
+	u16		SD_C_SIZE;
+	u8		SD_C_SIZE_MULT;
+
+	/* SD/MMC New spec. */
+	u8		SD_SPEC_VER;
+	u8		SD_CSD_VER;
+	u8		SD20_HIGH_CAPACITY;
+	u32		HC_C_SIZE;
+	u8		MMC_SPEC_VER;
+	u8		MMC_BusWidth;
+	u8		MMC_HIGH_CAPACITY;
+
+	/*----- MS Control Data ---------------- */
+	bool		MS_SWWP;
+	u32		MSP_TotalBlock;
+	struct ms_lib_ctrl MS_Lib;
+	bool		MS_IsRWPage;
+	u16		MS_Model;
+
+	/*----- SM Control Data ---------------- */
+	u8		SM_DeviceID;
+	u8		SM_CardID;
+
+	unsigned char	*testbuf;
+	u8		BIN_FLAG;
+	u32		bl_num;
+	int		SrbStatus;
+
+	/*------Power Managerment ---------------*/
+	bool		Power_IsResum;
+};
+
+static int ene_sd_init(struct us_data *us);
+static int ene_ms_init(struct us_data *us);
+static int ene_load_bincode(struct us_data *us, unsigned char flag);
+
+static void ene_ub6250_info_destructor(void *extra)
+{
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) extra;
+
+	if (!extra)
+		return;
+	kfree(info->bbuf);
+}
+
+static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg)
+{
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf;
+
+	int result;
+	unsigned int residue;
+	unsigned int cswlen = 0, partial = 0;
+	unsigned int transfer_length = bcb->DataTransferLength;
+
+	/* usb_stor_dbg(us, "transport --- ene_send_scsi_cmd\n"); */
+	/* send cmd to out endpoint */
+	result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+					    bcb, US_BULK_CB_WRAP_LEN, NULL);
+	if (result != USB_STOR_XFER_GOOD) {
+		usb_stor_dbg(us, "send cmd to out endpoint fail ---\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	if (buf) {
+		unsigned int pipe = fDir;
+
+		if (fDir  == FDIR_READ)
+			pipe = us->recv_bulk_pipe;
+		else
+			pipe = us->send_bulk_pipe;
+
+		/* Bulk */
+		if (use_sg) {
+			result = usb_stor_bulk_srb(us, pipe, us->srb);
+		} else {
+			result = usb_stor_bulk_transfer_sg(us, pipe, buf,
+						transfer_length, 0, &partial);
+		}
+		if (result != USB_STOR_XFER_GOOD) {
+			usb_stor_dbg(us, "data transfer fail ---\n");
+			return USB_STOR_TRANSPORT_ERROR;
+		}
+	}
+
+	/* Get CSW for device status */
+	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs,
+					    US_BULK_CS_WRAP_LEN, &cswlen);
+
+	if (result == USB_STOR_XFER_SHORT && cswlen == 0) {
+		usb_stor_dbg(us, "Received 0-length CSW; retrying...\n");
+		result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+					    bcs, US_BULK_CS_WRAP_LEN, &cswlen);
+	}
+
+	if (result == USB_STOR_XFER_STALLED) {
+		/* get the status again */
+		usb_stor_dbg(us, "Attempting to get CSW (2nd try)...\n");
+		result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+						bcs, US_BULK_CS_WRAP_LEN, NULL);
+	}
+
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/* check bulk status */
+	residue = le32_to_cpu(bcs->Residue);
+
+	/*
+	 * try to compute the actual residue, based on how much data
+	 * was really transferred and what the device tells us
+	 */
+	if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) {
+		residue = min(residue, transfer_length);
+		if (us->srb != NULL)
+			scsi_set_resid(us->srb, max(scsi_get_resid(us->srb),
+								residue));
+	}
+
+	if (bcs->Status != US_BULK_STAT_OK)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int do_scsi_request_sense(struct us_data *us, struct scsi_cmnd *srb)
+{
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	unsigned char buf[18];
+
+	memset(buf, 0, 18);
+	buf[0] = 0x70;				/* Current error */
+	buf[2] = info->SrbStatus >> 16;		/* Sense key */
+	buf[7] = 10;				/* Additional length */
+	buf[12] = info->SrbStatus >> 8;		/* ASC */
+	buf[13] = info->SrbStatus;		/* ASCQ */
+
+	usb_stor_set_xfer_buf(buf, sizeof(buf), srb);
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int do_scsi_inquiry(struct us_data *us, struct scsi_cmnd *srb)
+{
+	unsigned char data_ptr[36] = {
+		0x00, 0x00, 0x02, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x55,
+		0x53, 0x42, 0x32, 0x2E, 0x30, 0x20, 0x20, 0x43, 0x61,
+		0x72, 0x64, 0x52, 0x65, 0x61, 0x64, 0x65, 0x72, 0x20,
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x30, 0x31, 0x30, 0x30 };
+
+	usb_stor_set_xfer_buf(data_ptr, 36, srb);
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int sd_scsi_test_unit_ready(struct us_data *us, struct scsi_cmnd *srb)
+{
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	if ((info->SD_Status & SD_Insert) && (info->SD_Status & SD_Ready))
+		return USB_STOR_TRANSPORT_GOOD;
+	else {
+		ene_sd_init(us);
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int sd_scsi_mode_sense(struct us_data *us, struct scsi_cmnd *srb)
+{
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	unsigned char mediaNoWP[12] = {
+		0x0b, 0x00, 0x00, 0x08, 0x00, 0x00,
+		0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 };
+	unsigned char mediaWP[12]   = {
+		0x0b, 0x00, 0x80, 0x08, 0x00, 0x00,
+		0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 };
+
+	if (info->SD_Status & SD_WtP)
+		usb_stor_set_xfer_buf(mediaWP, 12, srb);
+	else
+		usb_stor_set_xfer_buf(mediaNoWP, 12, srb);
+
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int sd_scsi_read_capacity(struct us_data *us, struct scsi_cmnd *srb)
+{
+	u32	bl_num;
+	u32	bl_len;
+	unsigned int offset = 0;
+	unsigned char    buf[8];
+	struct scatterlist *sg = NULL;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	usb_stor_dbg(us, "sd_scsi_read_capacity\n");
+	if (info->SD_Status & SD_HiCapacity) {
+		bl_len = 0x200;
+		if (info->SD_Status & SD_IsMMC)
+			bl_num = info->HC_C_SIZE-1;
+		else
+			bl_num = (info->HC_C_SIZE + 1) * 1024 - 1;
+	} else {
+		bl_len = 1 << (info->SD_READ_BL_LEN);
+		bl_num = info->SD_Block_Mult * (info->SD_C_SIZE + 1)
+				* (1 << (info->SD_C_SIZE_MULT + 2)) - 1;
+	}
+	info->bl_num = bl_num;
+	usb_stor_dbg(us, "bl_len = %x\n", bl_len);
+	usb_stor_dbg(us, "bl_num = %x\n", bl_num);
+
+	/*srb->request_bufflen = 8; */
+	buf[0] = (bl_num >> 24) & 0xff;
+	buf[1] = (bl_num >> 16) & 0xff;
+	buf[2] = (bl_num >> 8) & 0xff;
+	buf[3] = (bl_num >> 0) & 0xff;
+	buf[4] = (bl_len >> 24) & 0xff;
+	buf[5] = (bl_len >> 16) & 0xff;
+	buf[6] = (bl_len >> 8) & 0xff;
+	buf[7] = (bl_len >> 0) & 0xff;
+
+	usb_stor_access_xfer_buf(buf, 8, srb, &sg, &offset, TO_XFER_BUF);
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int sd_scsi_read(struct us_data *us, struct scsi_cmnd *srb)
+{
+	int result;
+	unsigned char *cdb = srb->cmnd;
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	u32 bn = ((cdb[2] << 24) & 0xff000000) | ((cdb[3] << 16) & 0x00ff0000) |
+		 ((cdb[4] << 8) & 0x0000ff00) | ((cdb[5] << 0) & 0x000000ff);
+	u16 blen = ((cdb[7] << 8) & 0xff00) | ((cdb[8] << 0) & 0x00ff);
+	u32 bnByte = bn * 0x200;
+	u32 blenByte = blen * 0x200;
+
+	if (bn > info->bl_num)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	result = ene_load_bincode(us, SD_RW_PATTERN);
+	if (result != USB_STOR_XFER_GOOD) {
+		usb_stor_dbg(us, "Load SD RW pattern Fail !!\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	if (info->SD_Status & SD_HiCapacity)
+		bnByte = bn;
+
+	/* set up the command wrapper */
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = blenByte;
+	bcb->Flags  = US_BULK_FLAG_IN;
+	bcb->CDB[0] = 0xF1;
+	bcb->CDB[5] = (unsigned char)(bnByte);
+	bcb->CDB[4] = (unsigned char)(bnByte>>8);
+	bcb->CDB[3] = (unsigned char)(bnByte>>16);
+	bcb->CDB[2] = (unsigned char)(bnByte>>24);
+
+	result = ene_send_scsi_cmd(us, FDIR_READ, scsi_sglist(srb), 1);
+	return result;
+}
+
+static int sd_scsi_write(struct us_data *us, struct scsi_cmnd *srb)
+{
+	int result;
+	unsigned char *cdb = srb->cmnd;
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	u32 bn = ((cdb[2] << 24) & 0xff000000) | ((cdb[3] << 16) & 0x00ff0000) |
+		 ((cdb[4] << 8) & 0x0000ff00) | ((cdb[5] << 0) & 0x000000ff);
+	u16 blen = ((cdb[7] << 8) & 0xff00) | ((cdb[8] << 0) & 0x00ff);
+	u32 bnByte = bn * 0x200;
+	u32 blenByte = blen * 0x200;
+
+	if (bn > info->bl_num)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	result = ene_load_bincode(us, SD_RW_PATTERN);
+	if (result != USB_STOR_XFER_GOOD) {
+		usb_stor_dbg(us, "Load SD RW pattern Fail !!\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	if (info->SD_Status & SD_HiCapacity)
+		bnByte = bn;
+
+	/* set up the command wrapper */
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = blenByte;
+	bcb->Flags  = 0x00;
+	bcb->CDB[0] = 0xF0;
+	bcb->CDB[5] = (unsigned char)(bnByte);
+	bcb->CDB[4] = (unsigned char)(bnByte>>8);
+	bcb->CDB[3] = (unsigned char)(bnByte>>16);
+	bcb->CDB[2] = (unsigned char)(bnByte>>24);
+
+	result = ene_send_scsi_cmd(us, FDIR_WRITE, scsi_sglist(srb), 1);
+	return result;
+}
+
+/*
+ * ENE MS Card
+ */
+
+static int ms_lib_set_logicalpair(struct us_data *us, u16 logblk, u16 phyblk)
+{
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	if ((logblk >= info->MS_Lib.NumberOfLogBlock) || (phyblk >= info->MS_Lib.NumberOfPhyBlock))
+		return (u32)-1;
+
+	info->MS_Lib.Phy2LogMap[phyblk] = logblk;
+	info->MS_Lib.Log2PhyMap[logblk] = phyblk;
+
+	return 0;
+}
+
+static int ms_lib_set_logicalblockmark(struct us_data *us, u16 phyblk, u16 mark)
+{
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	if (phyblk >= info->MS_Lib.NumberOfPhyBlock)
+		return (u32)-1;
+
+	info->MS_Lib.Phy2LogMap[phyblk] = mark;
+
+	return 0;
+}
+
+static int ms_lib_set_initialerrorblock(struct us_data *us, u16 phyblk)
+{
+	return ms_lib_set_logicalblockmark(us, phyblk, MS_LB_INITIAL_ERROR);
+}
+
+static int ms_lib_set_bootblockmark(struct us_data *us, u16 phyblk)
+{
+	return ms_lib_set_logicalblockmark(us, phyblk, MS_LB_BOOT_BLOCK);
+}
+
+static int ms_lib_free_logicalmap(struct us_data *us)
+{
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	kfree(info->MS_Lib.Phy2LogMap);
+	info->MS_Lib.Phy2LogMap = NULL;
+
+	kfree(info->MS_Lib.Log2PhyMap);
+	info->MS_Lib.Log2PhyMap = NULL;
+
+	return 0;
+}
+
+static int ms_lib_alloc_logicalmap(struct us_data *us)
+{
+	u32  i;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	info->MS_Lib.Phy2LogMap = kmalloc_array(info->MS_Lib.NumberOfPhyBlock,
+						sizeof(u16),
+						GFP_KERNEL);
+	info->MS_Lib.Log2PhyMap = kmalloc_array(info->MS_Lib.NumberOfLogBlock,
+						sizeof(u16),
+						GFP_KERNEL);
+
+	if ((info->MS_Lib.Phy2LogMap == NULL) || (info->MS_Lib.Log2PhyMap == NULL)) {
+		ms_lib_free_logicalmap(us);
+		return (u32)-1;
+	}
+
+	for (i = 0; i < info->MS_Lib.NumberOfPhyBlock; i++)
+		info->MS_Lib.Phy2LogMap[i] = MS_LB_NOT_USED;
+
+	for (i = 0; i < info->MS_Lib.NumberOfLogBlock; i++)
+		info->MS_Lib.Log2PhyMap[i] = MS_LB_NOT_USED;
+
+	return 0;
+}
+
+static void ms_lib_clear_writebuf(struct us_data *us)
+{
+	int i;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	info->MS_Lib.wrtblk = (u16)-1;
+	ms_lib_clear_pagemap(info);
+
+	if (info->MS_Lib.blkpag)
+		memset(info->MS_Lib.blkpag, 0xff, info->MS_Lib.PagesPerBlock * info->MS_Lib.BytesPerSector);
+
+	if (info->MS_Lib.blkext) {
+		for (i = 0; i < info->MS_Lib.PagesPerBlock; i++) {
+			info->MS_Lib.blkext[i].status1 = MS_REG_ST1_DEFAULT;
+			info->MS_Lib.blkext[i].ovrflg = MS_REG_OVR_DEFAULT;
+			info->MS_Lib.blkext[i].mngflg = MS_REG_MNG_DEFAULT;
+			info->MS_Lib.blkext[i].logadr = MS_LB_NOT_USED;
+		}
+	}
+}
+
+static int ms_count_freeblock(struct us_data *us, u16 PhyBlock)
+{
+	u32 Ende, Count;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	Ende = PhyBlock + MS_PHYSICAL_BLOCKS_PER_SEGMENT;
+	for (Count = 0; PhyBlock < Ende; PhyBlock++) {
+		switch (info->MS_Lib.Phy2LogMap[PhyBlock]) {
+		case MS_LB_NOT_USED:
+		case MS_LB_NOT_USED_ERASED:
+			Count++;
+			break;
+		default:
+			break;
+		}
+	}
+
+	return Count;
+}
+
+static int ms_read_readpage(struct us_data *us, u32 PhyBlockAddr,
+		u8 PageNum, u32 *PageBuf, struct ms_lib_type_extdat *ExtraDat)
+{
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	u8 *bbuf = info->bbuf;
+	int result;
+	u32 bn = PhyBlockAddr * 0x20 + PageNum;
+
+	result = ene_load_bincode(us, MS_RW_PATTERN);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/* Read Page Data */
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = 0x200;
+	bcb->Flags      = US_BULK_FLAG_IN;
+	bcb->CDB[0]     = 0xF1;
+
+	bcb->CDB[1]     = 0x02; /* in init.c ENE_MSInit() is 0x01 */
+
+	bcb->CDB[5]     = (unsigned char)(bn);
+	bcb->CDB[4]     = (unsigned char)(bn>>8);
+	bcb->CDB[3]     = (unsigned char)(bn>>16);
+	bcb->CDB[2]     = (unsigned char)(bn>>24);
+
+	result = ene_send_scsi_cmd(us, FDIR_READ, PageBuf, 0);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+
+	/* Read Extra Data */
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = 0x4;
+	bcb->Flags      = US_BULK_FLAG_IN;
+	bcb->CDB[0]     = 0xF1;
+	bcb->CDB[1]     = 0x03;
+
+	bcb->CDB[5]     = (unsigned char)(PageNum);
+	bcb->CDB[4]     = (unsigned char)(PhyBlockAddr);
+	bcb->CDB[3]     = (unsigned char)(PhyBlockAddr>>8);
+	bcb->CDB[2]     = (unsigned char)(PhyBlockAddr>>16);
+	bcb->CDB[6]     = 0x01;
+
+	result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	ExtraDat->reserved = 0;
+	ExtraDat->intr     = 0x80;  /* Not yet,fireware support */
+	ExtraDat->status0  = 0x10;  /* Not yet,fireware support */
+
+	ExtraDat->status1  = 0x00;  /* Not yet,fireware support */
+	ExtraDat->ovrflg   = bbuf[0];
+	ExtraDat->mngflg   = bbuf[1];
+	ExtraDat->logadr   = memstick_logaddr(bbuf[2], bbuf[3]);
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_lib_process_bootblock(struct us_data *us, u16 PhyBlock, u8 *PageData)
+{
+	struct ms_bootblock_sysent *SysEntry;
+	struct ms_bootblock_sysinf *SysInfo;
+	u32 i, result;
+	u8 PageNumber;
+	u8 *PageBuffer;
+	struct ms_lib_type_extdat ExtraData;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	PageBuffer = kzalloc(MS_BYTES_PER_PAGE * 2, GFP_KERNEL);
+	if (PageBuffer == NULL)
+		return (u32)-1;
+
+	result = (u32)-1;
+
+	SysInfo = &(((struct ms_bootblock_page0 *)PageData)->sysinf);
+
+	if ((SysInfo->bMsClass != MS_SYSINF_MSCLASS_TYPE_1) ||
+		(be16_to_cpu(SysInfo->wPageSize) != MS_SYSINF_PAGE_SIZE) ||
+		((SysInfo->bSecuritySupport & MS_SYSINF_SECURITY) == MS_SYSINF_SECURITY_SUPPORT) ||
+		(SysInfo->bReserved1 != MS_SYSINF_RESERVED1) ||
+		(SysInfo->bReserved2 != MS_SYSINF_RESERVED2) ||
+		(SysInfo->bFormatType != MS_SYSINF_FORMAT_FAT) ||
+		(SysInfo->bUsage != MS_SYSINF_USAGE_GENERAL))
+		goto exit;
+		/* */
+	switch (info->MS_Lib.cardType = SysInfo->bCardType) {
+	case MS_SYSINF_CARDTYPE_RDONLY:
+		ms_lib_ctrl_set(info, MS_LIB_CTRL_RDONLY);
+		break;
+	case MS_SYSINF_CARDTYPE_RDWR:
+		ms_lib_ctrl_reset(info, MS_LIB_CTRL_RDONLY);
+		break;
+	case MS_SYSINF_CARDTYPE_HYBRID:
+	default:
+		goto exit;
+	}
+
+	info->MS_Lib.blockSize = be16_to_cpu(SysInfo->wBlockSize);
+	info->MS_Lib.NumberOfPhyBlock = be16_to_cpu(SysInfo->wBlockNumber);
+	info->MS_Lib.NumberOfLogBlock = be16_to_cpu(SysInfo->wTotalBlockNumber)-2;
+	info->MS_Lib.PagesPerBlock = info->MS_Lib.blockSize * SIZE_OF_KIRO / MS_BYTES_PER_PAGE;
+	info->MS_Lib.NumberOfSegment = info->MS_Lib.NumberOfPhyBlock / MS_PHYSICAL_BLOCKS_PER_SEGMENT;
+	info->MS_Model = be16_to_cpu(SysInfo->wMemorySize);
+
+	/*Allocate to all number of logicalblock and physicalblock */
+	if (ms_lib_alloc_logicalmap(us))
+		goto exit;
+
+	/* Mark the book block */
+	ms_lib_set_bootblockmark(us, PhyBlock);
+
+	SysEntry = &(((struct ms_bootblock_page0 *)PageData)->sysent);
+
+	for (i = 0; i < MS_NUMBER_OF_SYSTEM_ENTRY; i++) {
+		u32  EntryOffset, EntrySize;
+
+		EntryOffset = be32_to_cpu(SysEntry->entry[i].dwStart);
+
+		if (EntryOffset == 0xffffff)
+			continue;
+		EntrySize = be32_to_cpu(SysEntry->entry[i].dwSize);
+
+		if (EntrySize == 0)
+			continue;
+
+		if (EntryOffset + MS_BYTES_PER_PAGE + EntrySize > info->MS_Lib.blockSize * (u32)SIZE_OF_KIRO)
+			continue;
+
+		if (i == 0) {
+			u8 PrevPageNumber = 0;
+			u16 phyblk;
+
+			if (SysEntry->entry[i].bType != MS_SYSENT_TYPE_INVALID_BLOCK)
+				goto exit;
+
+			while (EntrySize > 0) {
+
+				PageNumber = (u8)(EntryOffset / MS_BYTES_PER_PAGE + 1);
+				if (PageNumber != PrevPageNumber) {
+					switch (ms_read_readpage(us, PhyBlock, PageNumber, (u32 *)PageBuffer, &ExtraData)) {
+					case MS_STATUS_SUCCESS:
+						break;
+					case MS_STATUS_WRITE_PROTECT:
+					case MS_ERROR_FLASH_READ:
+					case MS_STATUS_ERROR:
+					default:
+						goto exit;
+					}
+
+					PrevPageNumber = PageNumber;
+				}
+
+				phyblk = be16_to_cpu(*(u16 *)(PageBuffer + (EntryOffset % MS_BYTES_PER_PAGE)));
+				if (phyblk < 0x0fff)
+					ms_lib_set_initialerrorblock(us, phyblk);
+
+				EntryOffset += 2;
+				EntrySize -= 2;
+			}
+		} else if (i == 1) {  /* CIS/IDI */
+			struct ms_bootblock_idi *idi;
+
+			if (SysEntry->entry[i].bType != MS_SYSENT_TYPE_CIS_IDI)
+				goto exit;
+
+			switch (ms_read_readpage(us, PhyBlock, (u8)(EntryOffset / MS_BYTES_PER_PAGE + 1), (u32 *)PageBuffer, &ExtraData)) {
+			case MS_STATUS_SUCCESS:
+				break;
+			case MS_STATUS_WRITE_PROTECT:
+			case MS_ERROR_FLASH_READ:
+			case MS_STATUS_ERROR:
+			default:
+				goto exit;
+			}
+
+			idi = &((struct ms_bootblock_cis_idi *)(PageBuffer + (EntryOffset % MS_BYTES_PER_PAGE)))->idi.idi;
+			if (le16_to_cpu(idi->wIDIgeneralConfiguration) != MS_IDI_GENERAL_CONF)
+				goto exit;
+
+			info->MS_Lib.BytesPerSector = le16_to_cpu(idi->wIDIbytesPerSector);
+			if (info->MS_Lib.BytesPerSector != MS_BYTES_PER_PAGE)
+				goto exit;
+		}
+	} /* End for .. */
+
+	result = 0;
+
+exit:
+	if (result)
+		ms_lib_free_logicalmap(us);
+
+	kfree(PageBuffer);
+
+	result = 0;
+	return result;
+}
+
+static void ms_lib_free_writebuf(struct us_data *us)
+{
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	info->MS_Lib.wrtblk = (u16)-1; /* set to -1 */
+
+	/* memset((fdoExt)->MS_Lib.pagemap, 0, sizeof((fdoExt)->MS_Lib.pagemap)) */
+
+	ms_lib_clear_pagemap(info); /* (pdx)->MS_Lib.pagemap memset 0 in ms.h */
+
+	if (info->MS_Lib.blkpag) {
+		kfree(info->MS_Lib.blkpag);  /* Arnold test ... */
+		info->MS_Lib.blkpag = NULL;
+	}
+
+	if (info->MS_Lib.blkext) {
+		kfree(info->MS_Lib.blkext);  /* Arnold test ... */
+		info->MS_Lib.blkext = NULL;
+	}
+}
+
+
+static void ms_lib_free_allocatedarea(struct us_data *us)
+{
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	ms_lib_free_writebuf(us); /* Free MS_Lib.pagemap */
+	ms_lib_free_logicalmap(us); /* kfree MS_Lib.Phy2LogMap and MS_Lib.Log2PhyMap */
+
+	/* set struct us point flag to 0 */
+	info->MS_Lib.flags = 0;
+	info->MS_Lib.BytesPerSector = 0;
+	info->MS_Lib.SectorsPerCylinder = 0;
+
+	info->MS_Lib.cardType = 0;
+	info->MS_Lib.blockSize = 0;
+	info->MS_Lib.PagesPerBlock = 0;
+
+	info->MS_Lib.NumberOfPhyBlock = 0;
+	info->MS_Lib.NumberOfLogBlock = 0;
+}
+
+
+static int ms_lib_alloc_writebuf(struct us_data *us)
+{
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	info->MS_Lib.wrtblk = (u16)-1;
+
+	info->MS_Lib.blkpag = kmalloc_array(info->MS_Lib.PagesPerBlock,
+					    info->MS_Lib.BytesPerSector,
+					    GFP_KERNEL);
+	info->MS_Lib.blkext = kmalloc_array(info->MS_Lib.PagesPerBlock,
+					    sizeof(struct ms_lib_type_extdat),
+					    GFP_KERNEL);
+
+	if ((info->MS_Lib.blkpag == NULL) || (info->MS_Lib.blkext == NULL)) {
+		ms_lib_free_writebuf(us);
+		return (u32)-1;
+	}
+
+	ms_lib_clear_writebuf(us);
+
+	return 0;
+}
+
+static int ms_lib_force_setlogical_pair(struct us_data *us, u16 logblk, u16 phyblk)
+{
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	if (logblk == MS_LB_NOT_USED)
+		return 0;
+
+	if ((logblk >= info->MS_Lib.NumberOfLogBlock) ||
+		(phyblk >= info->MS_Lib.NumberOfPhyBlock))
+		return (u32)-1;
+
+	info->MS_Lib.Phy2LogMap[phyblk] = logblk;
+	info->MS_Lib.Log2PhyMap[logblk] = phyblk;
+
+	return 0;
+}
+
+static int ms_read_copyblock(struct us_data *us, u16 oldphy, u16 newphy,
+			u16 PhyBlockAddr, u8 PageNum, unsigned char *buf, u16 len)
+{
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	int result;
+
+	result = ene_load_bincode(us, MS_RW_PATTERN);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = 0x200*len;
+	bcb->Flags = 0x00;
+	bcb->CDB[0] = 0xF0;
+	bcb->CDB[1] = 0x08;
+	bcb->CDB[4] = (unsigned char)(oldphy);
+	bcb->CDB[3] = (unsigned char)(oldphy>>8);
+	bcb->CDB[2] = 0; /* (BYTE)(oldphy>>16) */
+	bcb->CDB[7] = (unsigned char)(newphy);
+	bcb->CDB[6] = (unsigned char)(newphy>>8);
+	bcb->CDB[5] = 0; /* (BYTE)(newphy>>16) */
+	bcb->CDB[9] = (unsigned char)(PhyBlockAddr);
+	bcb->CDB[8] = (unsigned char)(PhyBlockAddr>>8);
+	bcb->CDB[10] = PageNum;
+
+	result = ene_send_scsi_cmd(us, FDIR_WRITE, buf, 0);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_read_eraseblock(struct us_data *us, u32 PhyBlockAddr)
+{
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	int result;
+	u32 bn = PhyBlockAddr;
+
+	result = ene_load_bincode(us, MS_RW_PATTERN);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = 0x200;
+	bcb->Flags = US_BULK_FLAG_IN;
+	bcb->CDB[0] = 0xF2;
+	bcb->CDB[1] = 0x06;
+	bcb->CDB[4] = (unsigned char)(bn);
+	bcb->CDB[3] = (unsigned char)(bn>>8);
+	bcb->CDB[2] = (unsigned char)(bn>>16);
+
+	result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_lib_check_disableblock(struct us_data *us, u16 PhyBlock)
+{
+	unsigned char *PageBuf = NULL;
+	u16 result = MS_STATUS_SUCCESS;
+	u16 blk, index = 0;
+	struct ms_lib_type_extdat extdat;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	PageBuf = kmalloc(MS_BYTES_PER_PAGE, GFP_KERNEL);
+	if (PageBuf == NULL) {
+		result = MS_NO_MEMORY_ERROR;
+		goto exit;
+	}
+
+	ms_read_readpage(us, PhyBlock, 1, (u32 *)PageBuf, &extdat);
+	do {
+		blk = be16_to_cpu(PageBuf[index]);
+		if (blk == MS_LB_NOT_USED)
+			break;
+		if (blk == info->MS_Lib.Log2PhyMap[0]) {
+			result = MS_ERROR_FLASH_READ;
+			break;
+		}
+		index++;
+	} while (1);
+
+exit:
+	kfree(PageBuf);
+	return result;
+}
+
+static int ms_lib_setacquired_errorblock(struct us_data *us, u16 phyblk)
+{
+	u16 log;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	if (phyblk >= info->MS_Lib.NumberOfPhyBlock)
+		return (u32)-1;
+
+	log = info->MS_Lib.Phy2LogMap[phyblk];
+
+	if (log < info->MS_Lib.NumberOfLogBlock)
+		info->MS_Lib.Log2PhyMap[log] = MS_LB_NOT_USED;
+
+	if (info->MS_Lib.Phy2LogMap[phyblk] != MS_LB_INITIAL_ERROR)
+		info->MS_Lib.Phy2LogMap[phyblk] = MS_LB_ACQUIRED_ERROR;
+
+	return 0;
+}
+
+static int ms_lib_overwrite_extra(struct us_data *us, u32 PhyBlockAddr,
+				u8 PageNum, u8 OverwriteFlag)
+{
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	int result;
+
+	result = ene_load_bincode(us, MS_RW_PATTERN);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = 0x4;
+	bcb->Flags = US_BULK_FLAG_IN;
+	bcb->CDB[0] = 0xF2;
+	bcb->CDB[1] = 0x05;
+	bcb->CDB[5] = (unsigned char)(PageNum);
+	bcb->CDB[4] = (unsigned char)(PhyBlockAddr);
+	bcb->CDB[3] = (unsigned char)(PhyBlockAddr>>8);
+	bcb->CDB[2] = (unsigned char)(PhyBlockAddr>>16);
+	bcb->CDB[6] = OverwriteFlag;
+	bcb->CDB[7] = 0xFF;
+	bcb->CDB[8] = 0xFF;
+	bcb->CDB[9] = 0xFF;
+
+	result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_lib_error_phyblock(struct us_data *us, u16 phyblk)
+{
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	if (phyblk >= info->MS_Lib.NumberOfPhyBlock)
+		return MS_STATUS_ERROR;
+
+	ms_lib_setacquired_errorblock(us, phyblk);
+
+	if (ms_lib_iswritable(info))
+		return ms_lib_overwrite_extra(us, phyblk, 0, (u8)(~MS_REG_OVR_BKST & BYTE_MASK));
+
+	return MS_STATUS_SUCCESS;
+}
+
+static int ms_lib_erase_phyblock(struct us_data *us, u16 phyblk)
+{
+	u16 log;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	if (phyblk >= info->MS_Lib.NumberOfPhyBlock)
+		return MS_STATUS_ERROR;
+
+	log = info->MS_Lib.Phy2LogMap[phyblk];
+
+	if (log < info->MS_Lib.NumberOfLogBlock)
+		info->MS_Lib.Log2PhyMap[log] = MS_LB_NOT_USED;
+
+	info->MS_Lib.Phy2LogMap[phyblk] = MS_LB_NOT_USED;
+
+	if (ms_lib_iswritable(info)) {
+		switch (ms_read_eraseblock(us, phyblk)) {
+		case MS_STATUS_SUCCESS:
+			info->MS_Lib.Phy2LogMap[phyblk] = MS_LB_NOT_USED_ERASED;
+			return MS_STATUS_SUCCESS;
+		case MS_ERROR_FLASH_ERASE:
+		case MS_STATUS_INT_ERROR:
+			ms_lib_error_phyblock(us, phyblk);
+			return MS_ERROR_FLASH_ERASE;
+		case MS_STATUS_ERROR:
+		default:
+			ms_lib_ctrl_set(info, MS_LIB_CTRL_RDONLY); /* MS_LibCtrlSet will used by ENE_MSInit ,need check, and why us to info*/
+			ms_lib_setacquired_errorblock(us, phyblk);
+			return MS_STATUS_ERROR;
+		}
+	}
+
+	ms_lib_setacquired_errorblock(us, phyblk);
+
+	return MS_STATUS_SUCCESS;
+}
+
+static int ms_lib_read_extra(struct us_data *us, u32 PhyBlock,
+				u8 PageNum, struct ms_lib_type_extdat *ExtraDat)
+{
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	u8 *bbuf = info->bbuf;
+	int result;
+
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = 0x4;
+	bcb->Flags      = US_BULK_FLAG_IN;
+	bcb->CDB[0]     = 0xF1;
+	bcb->CDB[1]     = 0x03;
+	bcb->CDB[5]     = (unsigned char)(PageNum);
+	bcb->CDB[4]     = (unsigned char)(PhyBlock);
+	bcb->CDB[3]     = (unsigned char)(PhyBlock>>8);
+	bcb->CDB[2]     = (unsigned char)(PhyBlock>>16);
+	bcb->CDB[6]     = 0x01;
+
+	result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	ExtraDat->reserved = 0;
+	ExtraDat->intr     = 0x80;  /* Not yet, waiting for fireware support */
+	ExtraDat->status0  = 0x10;  /* Not yet, waiting for fireware support */
+	ExtraDat->status1  = 0x00;  /* Not yet, waiting for fireware support */
+	ExtraDat->ovrflg   = bbuf[0];
+	ExtraDat->mngflg   = bbuf[1];
+	ExtraDat->logadr   = memstick_logaddr(bbuf[2], bbuf[3]);
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_libsearch_block_from_physical(struct us_data *us, u16 phyblk)
+{
+	u16 blk;
+	struct ms_lib_type_extdat extdat; /* need check */
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+
+	if (phyblk >= info->MS_Lib.NumberOfPhyBlock)
+		return MS_LB_ERROR;
+
+	for (blk = phyblk + 1; blk != phyblk; blk++) {
+		if ((blk & MS_PHYSICAL_BLOCKS_PER_SEGMENT_MASK) == 0)
+			blk -= MS_PHYSICAL_BLOCKS_PER_SEGMENT;
+
+		if (info->MS_Lib.Phy2LogMap[blk] == MS_LB_NOT_USED_ERASED) {
+			return blk;
+		} else if (info->MS_Lib.Phy2LogMap[blk] == MS_LB_NOT_USED) {
+			switch (ms_lib_read_extra(us, blk, 0, &extdat)) {
+			case MS_STATUS_SUCCESS:
+			case MS_STATUS_SUCCESS_WITH_ECC:
+				break;
+			case MS_NOCARD_ERROR:
+				return MS_NOCARD_ERROR;
+			case MS_STATUS_INT_ERROR:
+				return MS_LB_ERROR;
+			case MS_ERROR_FLASH_READ:
+			default:
+				ms_lib_setacquired_errorblock(us, blk);
+				continue;
+			} /* End switch */
+
+			if ((extdat.ovrflg & MS_REG_OVR_BKST) != MS_REG_OVR_BKST_OK) {
+				ms_lib_setacquired_errorblock(us, blk);
+				continue;
+			}
+
+			switch (ms_lib_erase_phyblock(us, blk)) {
+			case MS_STATUS_SUCCESS:
+				return blk;
+			case MS_STATUS_ERROR:
+				return MS_LB_ERROR;
+			case MS_ERROR_FLASH_ERASE:
+			default:
+				ms_lib_error_phyblock(us, blk);
+				break;
+			}
+		}
+	} /* End for */
+
+	return MS_LB_ERROR;
+}
+static int ms_libsearch_block_from_logical(struct us_data *us, u16 logblk)
+{
+	u16 phyblk;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	phyblk = ms_libconv_to_physical(info, logblk);
+	if (phyblk >= MS_LB_ERROR) {
+		if (logblk >= info->MS_Lib.NumberOfLogBlock)
+			return MS_LB_ERROR;
+
+		phyblk = (logblk + MS_NUMBER_OF_BOOT_BLOCK) / MS_LOGICAL_BLOCKS_PER_SEGMENT;
+		phyblk *= MS_PHYSICAL_BLOCKS_PER_SEGMENT;
+		phyblk += MS_PHYSICAL_BLOCKS_PER_SEGMENT - 1;
+	}
+
+	return ms_libsearch_block_from_physical(us, phyblk);
+}
+
+static int ms_scsi_test_unit_ready(struct us_data *us, struct scsi_cmnd *srb)
+{
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
+
+	/* pr_info("MS_SCSI_Test_Unit_Ready\n"); */
+	if ((info->MS_Status & MS_Insert) && (info->MS_Status & MS_Ready)) {
+		return USB_STOR_TRANSPORT_GOOD;
+	} else {
+		ene_ms_init(us);
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_scsi_mode_sense(struct us_data *us, struct scsi_cmnd *srb)
+{
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	unsigned char mediaNoWP[12] = {
+		0x0b, 0x00, 0x00, 0x08, 0x00, 0x00,
+		0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 };
+	unsigned char mediaWP[12]   = {
+		0x0b, 0x00, 0x80, 0x08, 0x00, 0x00,
+		0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 };
+
+	if (info->MS_Status & MS_WtP)
+		usb_stor_set_xfer_buf(mediaWP, 12, srb);
+	else
+		usb_stor_set_xfer_buf(mediaNoWP, 12, srb);
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_scsi_read_capacity(struct us_data *us, struct scsi_cmnd *srb)
+{
+	u32   bl_num;
+	u16    bl_len;
+	unsigned int offset = 0;
+	unsigned char    buf[8];
+	struct scatterlist *sg = NULL;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	usb_stor_dbg(us, "ms_scsi_read_capacity\n");
+	bl_len = 0x200;
+	if (info->MS_Status & MS_IsMSPro)
+		bl_num = info->MSP_TotalBlock - 1;
+	else
+		bl_num = info->MS_Lib.NumberOfLogBlock * info->MS_Lib.blockSize * 2 - 1;
+
+	info->bl_num = bl_num;
+	usb_stor_dbg(us, "bl_len = %x\n", bl_len);
+	usb_stor_dbg(us, "bl_num = %x\n", bl_num);
+
+	/*srb->request_bufflen = 8; */
+	buf[0] = (bl_num >> 24) & 0xff;
+	buf[1] = (bl_num >> 16) & 0xff;
+	buf[2] = (bl_num >> 8) & 0xff;
+	buf[3] = (bl_num >> 0) & 0xff;
+	buf[4] = (bl_len >> 24) & 0xff;
+	buf[5] = (bl_len >> 16) & 0xff;
+	buf[6] = (bl_len >> 8) & 0xff;
+	buf[7] = (bl_len >> 0) & 0xff;
+
+	usb_stor_access_xfer_buf(buf, 8, srb, &sg, &offset, TO_XFER_BUF);
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static void ms_lib_phy_to_log_range(u16 PhyBlock, u16 *LogStart, u16 *LogEnde)
+{
+	PhyBlock /= MS_PHYSICAL_BLOCKS_PER_SEGMENT;
+
+	if (PhyBlock) {
+		*LogStart = MS_LOGICAL_BLOCKS_IN_1ST_SEGMENT + (PhyBlock - 1) * MS_LOGICAL_BLOCKS_PER_SEGMENT;/*496*/
+		*LogEnde = *LogStart + MS_LOGICAL_BLOCKS_PER_SEGMENT;/*496*/
+	} else {
+		*LogStart = 0;
+		*LogEnde = MS_LOGICAL_BLOCKS_IN_1ST_SEGMENT;/*494*/
+	}
+}
+
+static int ms_lib_read_extrablock(struct us_data *us, u32 PhyBlock,
+	u8 PageNum, u8 blen, void *buf)
+{
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	int     result;
+
+	/* Read Extra Data */
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = 0x4 * blen;
+	bcb->Flags      = US_BULK_FLAG_IN;
+	bcb->CDB[0]     = 0xF1;
+	bcb->CDB[1]     = 0x03;
+	bcb->CDB[5]     = (unsigned char)(PageNum);
+	bcb->CDB[4]     = (unsigned char)(PhyBlock);
+	bcb->CDB[3]     = (unsigned char)(PhyBlock>>8);
+	bcb->CDB[2]     = (unsigned char)(PhyBlock>>16);
+	bcb->CDB[6]     = blen;
+
+	result = ene_send_scsi_cmd(us, FDIR_READ, buf, 0);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_lib_scan_logicalblocknumber(struct us_data *us, u16 btBlk1st)
+{
+	u16 PhyBlock, newblk, i;
+	u16 LogStart, LogEnde;
+	struct ms_lib_type_extdat extdat;
+	u32 count = 0, index = 0;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	u8 *bbuf = info->bbuf;
+
+	for (PhyBlock = 0; PhyBlock < info->MS_Lib.NumberOfPhyBlock;) {
+		ms_lib_phy_to_log_range(PhyBlock, &LogStart, &LogEnde);
+
+		for (i = 0; i < MS_PHYSICAL_BLOCKS_PER_SEGMENT; i++, PhyBlock++) {
+			switch (ms_libconv_to_logical(info, PhyBlock)) {
+			case MS_STATUS_ERROR:
+				continue;
+			default:
+				break;
+			}
+
+			if (count == PhyBlock) {
+				ms_lib_read_extrablock(us, PhyBlock, 0, 0x80,
+						bbuf);
+				count += 0x80;
+			}
+			index = (PhyBlock % 0x80) * 4;
+
+			extdat.ovrflg = bbuf[index];
+			extdat.mngflg = bbuf[index+1];
+			extdat.logadr = memstick_logaddr(bbuf[index+2],
+					bbuf[index+3]);
+
+			if ((extdat.ovrflg & MS_REG_OVR_BKST) != MS_REG_OVR_BKST_OK) {
+				ms_lib_setacquired_errorblock(us, PhyBlock);
+				continue;
+			}
+
+			if ((extdat.mngflg & MS_REG_MNG_ATFLG) == MS_REG_MNG_ATFLG_ATTBL) {
+				ms_lib_erase_phyblock(us, PhyBlock);
+				continue;
+			}
+
+			if (extdat.logadr != MS_LB_NOT_USED) {
+				if ((extdat.logadr < LogStart) || (LogEnde <= extdat.logadr)) {
+					ms_lib_erase_phyblock(us, PhyBlock);
+					continue;
+				}
+
+				newblk = ms_libconv_to_physical(info, extdat.logadr);
+
+				if (newblk != MS_LB_NOT_USED) {
+					if (extdat.logadr == 0) {
+						ms_lib_set_logicalpair(us, extdat.logadr, PhyBlock);
+						if (ms_lib_check_disableblock(us, btBlk1st)) {
+							ms_lib_set_logicalpair(us, extdat.logadr, newblk);
+							continue;
+						}
+					}
+
+					ms_lib_read_extra(us, newblk, 0, &extdat);
+					if ((extdat.ovrflg & MS_REG_OVR_UDST) == MS_REG_OVR_UDST_UPDATING) {
+						ms_lib_erase_phyblock(us, PhyBlock);
+						continue;
+					} else {
+						ms_lib_erase_phyblock(us, newblk);
+					}
+				}
+
+				ms_lib_set_logicalpair(us, extdat.logadr, PhyBlock);
+			}
+		}
+	} /* End for ... */
+
+	return MS_STATUS_SUCCESS;
+}
+
+
+static int ms_scsi_read(struct us_data *us, struct scsi_cmnd *srb)
+{
+	int result;
+	unsigned char *cdb = srb->cmnd;
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	u32 bn = ((cdb[2] << 24) & 0xff000000) | ((cdb[3] << 16) & 0x00ff0000) |
+		((cdb[4] << 8) & 0x0000ff00) | ((cdb[5] << 0) & 0x000000ff);
+	u16 blen = ((cdb[7] << 8) & 0xff00) | ((cdb[8] << 0) & 0x00ff);
+	u32 blenByte = blen * 0x200;
+
+	if (bn > info->bl_num)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	if (info->MS_Status & MS_IsMSPro) {
+		result = ene_load_bincode(us, MSP_RW_PATTERN);
+		if (result != USB_STOR_XFER_GOOD) {
+			usb_stor_dbg(us, "Load MPS RW pattern Fail !!\n");
+			return USB_STOR_TRANSPORT_ERROR;
+		}
+
+		/* set up the command wrapper */
+		memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+		bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+		bcb->DataTransferLength = blenByte;
+		bcb->Flags  = US_BULK_FLAG_IN;
+		bcb->CDB[0] = 0xF1;
+		bcb->CDB[1] = 0x02;
+		bcb->CDB[5] = (unsigned char)(bn);
+		bcb->CDB[4] = (unsigned char)(bn>>8);
+		bcb->CDB[3] = (unsigned char)(bn>>16);
+		bcb->CDB[2] = (unsigned char)(bn>>24);
+
+		result = ene_send_scsi_cmd(us, FDIR_READ, scsi_sglist(srb), 1);
+	} else {
+		void *buf;
+		int offset = 0;
+		u16 phyblk, logblk;
+		u8 PageNum;
+		u16 len;
+		u32 blkno;
+
+		buf = kmalloc(blenByte, GFP_KERNEL);
+		if (buf == NULL)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		result = ene_load_bincode(us, MS_RW_PATTERN);
+		if (result != USB_STOR_XFER_GOOD) {
+			pr_info("Load MS RW pattern Fail !!\n");
+			result = USB_STOR_TRANSPORT_ERROR;
+			goto exit;
+		}
+
+		logblk  = (u16)(bn / info->MS_Lib.PagesPerBlock);
+		PageNum = (u8)(bn % info->MS_Lib.PagesPerBlock);
+
+		while (1) {
+			if (blen > (info->MS_Lib.PagesPerBlock-PageNum))
+				len = info->MS_Lib.PagesPerBlock-PageNum;
+			else
+				len = blen;
+
+			phyblk = ms_libconv_to_physical(info, logblk);
+			blkno  = phyblk * 0x20 + PageNum;
+
+			/* set up the command wrapper */
+			memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+			bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+			bcb->DataTransferLength = 0x200 * len;
+			bcb->Flags  = US_BULK_FLAG_IN;
+			bcb->CDB[0] = 0xF1;
+			bcb->CDB[1] = 0x02;
+			bcb->CDB[5] = (unsigned char)(blkno);
+			bcb->CDB[4] = (unsigned char)(blkno>>8);
+			bcb->CDB[3] = (unsigned char)(blkno>>16);
+			bcb->CDB[2] = (unsigned char)(blkno>>24);
+
+			result = ene_send_scsi_cmd(us, FDIR_READ, buf+offset, 0);
+			if (result != USB_STOR_XFER_GOOD) {
+				pr_info("MS_SCSI_Read --- result = %x\n", result);
+				result = USB_STOR_TRANSPORT_ERROR;
+				goto exit;
+			}
+
+			blen -= len;
+			if (blen <= 0)
+				break;
+			logblk++;
+			PageNum = 0;
+			offset += MS_BYTES_PER_PAGE*len;
+		}
+		usb_stor_set_xfer_buf(buf, blenByte, srb);
+exit:
+		kfree(buf);
+	}
+	return result;
+}
+
+static int ms_scsi_write(struct us_data *us, struct scsi_cmnd *srb)
+{
+	int result;
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	unsigned char *cdb = srb->cmnd;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	u32 bn = ((cdb[2] << 24) & 0xff000000) |
+			((cdb[3] << 16) & 0x00ff0000) |
+			((cdb[4] << 8) & 0x0000ff00) |
+			((cdb[5] << 0) & 0x000000ff);
+	u16 blen = ((cdb[7] << 8) & 0xff00) | ((cdb[8] << 0) & 0x00ff);
+	u32 blenByte = blen * 0x200;
+
+	if (bn > info->bl_num)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	if (info->MS_Status & MS_IsMSPro) {
+		result = ene_load_bincode(us, MSP_RW_PATTERN);
+		if (result != USB_STOR_XFER_GOOD) {
+			pr_info("Load MSP RW pattern Fail !!\n");
+			return USB_STOR_TRANSPORT_ERROR;
+		}
+
+		/* set up the command wrapper */
+		memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+		bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+		bcb->DataTransferLength = blenByte;
+		bcb->Flags  = 0x00;
+		bcb->CDB[0] = 0xF0;
+		bcb->CDB[1] = 0x04;
+		bcb->CDB[5] = (unsigned char)(bn);
+		bcb->CDB[4] = (unsigned char)(bn>>8);
+		bcb->CDB[3] = (unsigned char)(bn>>16);
+		bcb->CDB[2] = (unsigned char)(bn>>24);
+
+		result = ene_send_scsi_cmd(us, FDIR_WRITE, scsi_sglist(srb), 1);
+	} else {
+		void *buf;
+		int offset = 0;
+		u16 PhyBlockAddr;
+		u8 PageNum;
+		u16 len, oldphy, newphy;
+
+		buf = kmalloc(blenByte, GFP_KERNEL);
+		if (buf == NULL)
+			return USB_STOR_TRANSPORT_ERROR;
+		usb_stor_set_xfer_buf(buf, blenByte, srb);
+
+		result = ene_load_bincode(us, MS_RW_PATTERN);
+		if (result != USB_STOR_XFER_GOOD) {
+			pr_info("Load MS RW pattern Fail !!\n");
+			result = USB_STOR_TRANSPORT_ERROR;
+			goto exit;
+		}
+
+		PhyBlockAddr = (u16)(bn / info->MS_Lib.PagesPerBlock);
+		PageNum      = (u8)(bn % info->MS_Lib.PagesPerBlock);
+
+		while (1) {
+			if (blen > (info->MS_Lib.PagesPerBlock-PageNum))
+				len = info->MS_Lib.PagesPerBlock-PageNum;
+			else
+				len = blen;
+
+			oldphy = ms_libconv_to_physical(info, PhyBlockAddr); /* need check us <-> info */
+			newphy = ms_libsearch_block_from_logical(us, PhyBlockAddr);
+
+			result = ms_read_copyblock(us, oldphy, newphy, PhyBlockAddr, PageNum, buf+offset, len);
+
+			if (result != USB_STOR_XFER_GOOD) {
+				pr_info("MS_SCSI_Write --- result = %x\n", result);
+				result =  USB_STOR_TRANSPORT_ERROR;
+				goto exit;
+			}
+
+			info->MS_Lib.Phy2LogMap[oldphy] = MS_LB_NOT_USED_ERASED;
+			ms_lib_force_setlogical_pair(us, PhyBlockAddr, newphy);
+
+			blen -= len;
+			if (blen <= 0)
+				break;
+			PhyBlockAddr++;
+			PageNum = 0;
+			offset += MS_BYTES_PER_PAGE*len;
+		}
+exit:
+		kfree(buf);
+	}
+	return result;
+}
+
+/*
+ * ENE MS Card
+ */
+
+static int ene_get_card_type(struct us_data *us, u16 index, void *buf)
+{
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	int result;
+
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength	= 0x01;
+	bcb->Flags			= US_BULK_FLAG_IN;
+	bcb->CDB[0]			= 0xED;
+	bcb->CDB[2]			= (unsigned char)(index>>8);
+	bcb->CDB[3]			= (unsigned char)index;
+
+	result = ene_send_scsi_cmd(us, FDIR_READ, buf, 0);
+	return result;
+}
+
+static int ene_get_card_status(struct us_data *us, u8 *buf)
+{
+	u16 tmpreg;
+	u32 reg4b;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	/*usb_stor_dbg(us, "transport --- ENE_ReadSDReg\n");*/
+	reg4b = *(u32 *)&buf[0x18];
+	info->SD_READ_BL_LEN = (u8)((reg4b >> 8) & 0x0f);
+
+	tmpreg = (u16) reg4b;
+	reg4b = *(u32 *)(&buf[0x14]);
+	if ((info->SD_Status & SD_HiCapacity) && !(info->SD_Status & SD_IsMMC))
+		info->HC_C_SIZE = (reg4b >> 8) & 0x3fffff;
+
+	info->SD_C_SIZE = ((tmpreg & 0x03) << 10) | (u16)(reg4b >> 22);
+	info->SD_C_SIZE_MULT = (u8)(reg4b >> 7)  & 0x07;
+	if ((info->SD_Status & SD_HiCapacity) && (info->SD_Status & SD_IsMMC))
+		info->HC_C_SIZE = *(u32 *)(&buf[0x100]);
+
+	if (info->SD_READ_BL_LEN > SD_BLOCK_LEN) {
+		info->SD_Block_Mult = 1 << (info->SD_READ_BL_LEN-SD_BLOCK_LEN);
+		info->SD_READ_BL_LEN = SD_BLOCK_LEN;
+	} else {
+		info->SD_Block_Mult = 1;
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ene_load_bincode(struct us_data *us, unsigned char flag)
+{
+	int err;
+	char *fw_name = NULL;
+	unsigned char *buf = NULL;
+	const struct firmware *sd_fw = NULL;
+	int result = USB_STOR_TRANSPORT_ERROR;
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	if (info->BIN_FLAG == flag)
+		return USB_STOR_TRANSPORT_GOOD;
+
+	switch (flag) {
+	/* For SD */
+	case SD_INIT1_PATTERN:
+		usb_stor_dbg(us, "SD_INIT1_PATTERN\n");
+		fw_name = SD_INIT1_FIRMWARE;
+		break;
+	case SD_INIT2_PATTERN:
+		usb_stor_dbg(us, "SD_INIT2_PATTERN\n");
+		fw_name = SD_INIT2_FIRMWARE;
+		break;
+	case SD_RW_PATTERN:
+		usb_stor_dbg(us, "SD_RW_PATTERN\n");
+		fw_name = SD_RW_FIRMWARE;
+		break;
+	/* For MS */
+	case MS_INIT_PATTERN:
+		usb_stor_dbg(us, "MS_INIT_PATTERN\n");
+		fw_name = MS_INIT_FIRMWARE;
+		break;
+	case MSP_RW_PATTERN:
+		usb_stor_dbg(us, "MSP_RW_PATTERN\n");
+		fw_name = MSP_RW_FIRMWARE;
+		break;
+	case MS_RW_PATTERN:
+		usb_stor_dbg(us, "MS_RW_PATTERN\n");
+		fw_name = MS_RW_FIRMWARE;
+		break;
+	default:
+		usb_stor_dbg(us, "----------- Unknown PATTERN ----------\n");
+		goto nofw;
+	}
+
+	err = request_firmware(&sd_fw, fw_name, &us->pusb_dev->dev);
+	if (err) {
+		usb_stor_dbg(us, "load firmware %s failed\n", fw_name);
+		goto nofw;
+	}
+	buf = kmemdup(sd_fw->data, sd_fw->size, GFP_KERNEL);
+	if (buf == NULL)
+		goto nofw;
+
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = sd_fw->size;
+	bcb->Flags = 0x00;
+	bcb->CDB[0] = 0xEF;
+
+	result = ene_send_scsi_cmd(us, FDIR_WRITE, buf, 0);
+	if (us->srb != NULL)
+		scsi_set_resid(us->srb, 0);
+	info->BIN_FLAG = flag;
+	kfree(buf);
+
+nofw:
+	release_firmware(sd_fw);
+	return result;
+}
+
+static int ms_card_init(struct us_data *us)
+{
+	u32 result;
+	u16 TmpBlock;
+	unsigned char *PageBuffer0 = NULL, *PageBuffer1 = NULL;
+	struct ms_lib_type_extdat extdat;
+	u16 btBlk1st, btBlk2nd;
+	u32 btBlk1stErred;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+	printk(KERN_INFO "MS_CardInit start\n");
+
+	ms_lib_free_allocatedarea(us); /* Clean buffer and set struct us_data flag to 0 */
+
+	/* get two PageBuffer */
+	PageBuffer0 = kmalloc(MS_BYTES_PER_PAGE, GFP_KERNEL);
+	PageBuffer1 = kmalloc(MS_BYTES_PER_PAGE, GFP_KERNEL);
+	if ((PageBuffer0 == NULL) || (PageBuffer1 == NULL)) {
+		result = MS_NO_MEMORY_ERROR;
+		goto exit;
+	}
+
+	btBlk1st = btBlk2nd = MS_LB_NOT_USED;
+	btBlk1stErred = 0;
+
+	for (TmpBlock = 0; TmpBlock < MS_MAX_INITIAL_ERROR_BLOCKS+2; TmpBlock++) {
+
+		switch (ms_read_readpage(us, TmpBlock, 0, (u32 *)PageBuffer0, &extdat)) {
+		case MS_STATUS_SUCCESS:
+			break;
+		case MS_STATUS_INT_ERROR:
+			break;
+		case MS_STATUS_ERROR:
+		default:
+			continue;
+		}
+
+		if ((extdat.ovrflg & MS_REG_OVR_BKST) == MS_REG_OVR_BKST_NG)
+			continue;
+
+		if (((extdat.mngflg & MS_REG_MNG_SYSFLG) == MS_REG_MNG_SYSFLG_USER) ||
+			(be16_to_cpu(((struct ms_bootblock_page0 *)PageBuffer0)->header.wBlockID) != MS_BOOT_BLOCK_ID) ||
+			(be16_to_cpu(((struct ms_bootblock_page0 *)PageBuffer0)->header.wFormatVersion) != MS_BOOT_BLOCK_FORMAT_VERSION) ||
+			(((struct ms_bootblock_page0 *)PageBuffer0)->header.bNumberOfDataEntry != MS_BOOT_BLOCK_DATA_ENTRIES))
+				continue;
+
+		if (btBlk1st != MS_LB_NOT_USED) {
+			btBlk2nd = TmpBlock;
+			break;
+		}
+
+		btBlk1st = TmpBlock;
+		memcpy(PageBuffer1, PageBuffer0, MS_BYTES_PER_PAGE);
+		if (extdat.status1 & (MS_REG_ST1_DTER | MS_REG_ST1_EXER | MS_REG_ST1_FGER))
+			btBlk1stErred = 1;
+	}
+
+	if (btBlk1st == MS_LB_NOT_USED) {
+		result = MS_STATUS_ERROR;
+		goto exit;
+	}
+
+	/* write protect */
+	if ((extdat.status0 & MS_REG_ST0_WP) == MS_REG_ST0_WP_ON)
+		ms_lib_ctrl_set(info, MS_LIB_CTRL_WRPROTECT);
+
+	result = MS_STATUS_ERROR;
+	/* 1st Boot Block */
+	if (btBlk1stErred == 0)
+		result = ms_lib_process_bootblock(us, btBlk1st, PageBuffer1);
+		/* 1st */
+	/* 2nd Boot Block */
+	if (result && (btBlk2nd != MS_LB_NOT_USED))
+		result = ms_lib_process_bootblock(us, btBlk2nd, PageBuffer0);
+
+	if (result) {
+		result = MS_STATUS_ERROR;
+		goto exit;
+	}
+
+	for (TmpBlock = 0; TmpBlock < btBlk1st; TmpBlock++)
+		info->MS_Lib.Phy2LogMap[TmpBlock] = MS_LB_INITIAL_ERROR;
+
+	info->MS_Lib.Phy2LogMap[btBlk1st] = MS_LB_BOOT_BLOCK;
+
+	if (btBlk2nd != MS_LB_NOT_USED) {
+		for (TmpBlock = btBlk1st + 1; TmpBlock < btBlk2nd; TmpBlock++)
+			info->MS_Lib.Phy2LogMap[TmpBlock] = MS_LB_INITIAL_ERROR;
+
+		info->MS_Lib.Phy2LogMap[btBlk2nd] = MS_LB_BOOT_BLOCK;
+	}
+
+	result = ms_lib_scan_logicalblocknumber(us, btBlk1st);
+	if (result)
+		goto exit;
+
+	for (TmpBlock = MS_PHYSICAL_BLOCKS_PER_SEGMENT;
+		TmpBlock < info->MS_Lib.NumberOfPhyBlock;
+		TmpBlock += MS_PHYSICAL_BLOCKS_PER_SEGMENT) {
+		if (ms_count_freeblock(us, TmpBlock) == 0) {
+			ms_lib_ctrl_set(info, MS_LIB_CTRL_WRPROTECT);
+			break;
+		}
+	}
+
+	/* write */
+	if (ms_lib_alloc_writebuf(us)) {
+		result = MS_NO_MEMORY_ERROR;
+		goto exit;
+	}
+
+	result = MS_STATUS_SUCCESS;
+
+exit:
+	kfree(PageBuffer1);
+	kfree(PageBuffer0);
+
+	printk(KERN_INFO "MS_CardInit end\n");
+	return result;
+}
+
+static int ene_ms_init(struct us_data *us)
+{
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	int result;
+	u16 MSP_BlockSize, MSP_UserAreaBlocks;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	u8 *bbuf = info->bbuf;
+	unsigned int s;
+
+	printk(KERN_INFO "transport --- ENE_MSInit\n");
+
+	/* the same part to test ENE */
+
+	result = ene_load_bincode(us, MS_INIT_PATTERN);
+	if (result != USB_STOR_XFER_GOOD) {
+		printk(KERN_ERR "Load MS Init Code Fail !!\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = 0x200;
+	bcb->Flags      = US_BULK_FLAG_IN;
+	bcb->CDB[0]     = 0xF1;
+	bcb->CDB[1]     = 0x01;
+
+	result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
+	if (result != USB_STOR_XFER_GOOD) {
+		printk(KERN_ERR "Execution MS Init Code Fail !!\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+	/* the same part to test ENE */
+	info->MS_Status = bbuf[0];
+
+	s = info->MS_Status;
+	if ((s & MS_Insert) && (s & MS_Ready)) {
+		printk(KERN_INFO "Insert     = %x\n", !!(s & MS_Insert));
+		printk(KERN_INFO "Ready      = %x\n", !!(s & MS_Ready));
+		printk(KERN_INFO "IsMSPro    = %x\n", !!(s & MS_IsMSPro));
+		printk(KERN_INFO "IsMSPHG    = %x\n", !!(s & MS_IsMSPHG));
+		printk(KERN_INFO "WtP= %x\n", !!(s & MS_WtP));
+		if (s & MS_IsMSPro) {
+			MSP_BlockSize      = (bbuf[6] << 8) | bbuf[7];
+			MSP_UserAreaBlocks = (bbuf[10] << 8) | bbuf[11];
+			info->MSP_TotalBlock = MSP_BlockSize * MSP_UserAreaBlocks;
+		} else {
+			ms_card_init(us); /* Card is MS (to ms.c)*/
+		}
+		usb_stor_dbg(us, "MS Init Code OK !!\n");
+	} else {
+		usb_stor_dbg(us, "MS Card Not Ready --- %x\n", bbuf[0]);
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ene_sd_init(struct us_data *us)
+{
+	int result;
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	u8 *bbuf = info->bbuf;
+
+	usb_stor_dbg(us, "transport --- ENE_SDInit\n");
+	/* SD Init Part-1 */
+	result = ene_load_bincode(us, SD_INIT1_PATTERN);
+	if (result != USB_STOR_XFER_GOOD) {
+		usb_stor_dbg(us, "Load SD Init Code Part-1 Fail !!\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->Flags = US_BULK_FLAG_IN;
+	bcb->CDB[0] = 0xF2;
+
+	result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0);
+	if (result != USB_STOR_XFER_GOOD) {
+		usb_stor_dbg(us, "Execution SD Init Code Fail !!\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/* SD Init Part-2 */
+	result = ene_load_bincode(us, SD_INIT2_PATTERN);
+	if (result != USB_STOR_XFER_GOOD) {
+		usb_stor_dbg(us, "Load SD Init Code Part-2 Fail !!\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = 0x200;
+	bcb->Flags              = US_BULK_FLAG_IN;
+	bcb->CDB[0]             = 0xF1;
+
+	result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
+	if (result != USB_STOR_XFER_GOOD) {
+		usb_stor_dbg(us, "Execution SD Init Code Fail !!\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	info->SD_Status = bbuf[0];
+	if ((info->SD_Status & SD_Insert) && (info->SD_Status & SD_Ready)) {
+		unsigned int s = info->SD_Status;
+
+		ene_get_card_status(us, bbuf);
+		usb_stor_dbg(us, "Insert     = %x\n", !!(s & SD_Insert));
+		usb_stor_dbg(us, "Ready      = %x\n", !!(s & SD_Ready));
+		usb_stor_dbg(us, "IsMMC      = %x\n", !!(s & SD_IsMMC));
+		usb_stor_dbg(us, "HiCapacity = %x\n", !!(s & SD_HiCapacity));
+		usb_stor_dbg(us, "HiSpeed    = %x\n", !!(s & SD_HiSpeed));
+		usb_stor_dbg(us, "WtP        = %x\n", !!(s & SD_WtP));
+	} else {
+		usb_stor_dbg(us, "SD Card Not Ready --- %x\n", bbuf[0]);
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+
+static int ene_init(struct us_data *us)
+{
+	int result;
+	u8  misc_reg03;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
+	u8 *bbuf = info->bbuf;
+
+	result = ene_get_card_type(us, REG_CARD_STATUS, bbuf);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	misc_reg03 = bbuf[0];
+	if (misc_reg03 & 0x01) {
+		if (!(info->SD_Status & SD_Ready)) {
+			result = ene_sd_init(us);
+			if (result != USB_STOR_XFER_GOOD)
+				return USB_STOR_TRANSPORT_ERROR;
+		}
+	}
+	if (misc_reg03 & 0x02) {
+		if (!(info->MS_Status & MS_Ready)) {
+			result = ene_ms_init(us);
+			if (result != USB_STOR_XFER_GOOD)
+				return USB_STOR_TRANSPORT_ERROR;
+		}
+	}
+	return result;
+}
+
+/*----- sd_scsi_irp() ---------*/
+static int sd_scsi_irp(struct us_data *us, struct scsi_cmnd *srb)
+{
+	int    result;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *)us->extra;
+
+	switch (srb->cmnd[0]) {
+	case TEST_UNIT_READY:
+		result = sd_scsi_test_unit_ready(us, srb);
+		break; /* 0x00 */
+	case REQUEST_SENSE:
+		result = do_scsi_request_sense(us, srb);
+		break; /* 0x03 */
+	case INQUIRY:
+		result = do_scsi_inquiry(us, srb);
+		break; /* 0x12 */
+	case MODE_SENSE:
+		result = sd_scsi_mode_sense(us, srb);
+		break; /* 0x1A */
+	/*
+	case START_STOP:
+		result = SD_SCSI_Start_Stop(us, srb);
+		break; //0x1B
+	*/
+	case READ_CAPACITY:
+		result = sd_scsi_read_capacity(us, srb);
+		break; /* 0x25 */
+	case READ_10:
+		result = sd_scsi_read(us, srb);
+		break; /* 0x28 */
+	case WRITE_10:
+		result = sd_scsi_write(us, srb);
+		break; /* 0x2A */
+	default:
+		info->SrbStatus = SS_ILLEGAL_REQUEST;
+		result = USB_STOR_TRANSPORT_FAILED;
+		break;
+	}
+	if (result == USB_STOR_TRANSPORT_GOOD)
+		info->SrbStatus = SS_SUCCESS;
+	return result;
+}
+
+/*
+ * ms_scsi_irp()
+ */
+static int ms_scsi_irp(struct us_data *us, struct scsi_cmnd *srb)
+{
+	int result;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *)us->extra;
+
+	switch (srb->cmnd[0]) {
+	case TEST_UNIT_READY:
+		result = ms_scsi_test_unit_ready(us, srb);
+		break; /* 0x00 */
+	case REQUEST_SENSE:
+		result = do_scsi_request_sense(us, srb);
+		break; /* 0x03 */
+	case INQUIRY:
+		result = do_scsi_inquiry(us, srb);
+		break; /* 0x12 */
+	case MODE_SENSE:
+		result = ms_scsi_mode_sense(us, srb);
+		break; /* 0x1A */
+	case READ_CAPACITY:
+		result = ms_scsi_read_capacity(us, srb);
+		break; /* 0x25 */
+	case READ_10:
+		result = ms_scsi_read(us, srb);
+		break; /* 0x28 */
+	case WRITE_10:
+		result = ms_scsi_write(us, srb);
+		break;  /* 0x2A */
+	default:
+		info->SrbStatus = SS_ILLEGAL_REQUEST;
+		result = USB_STOR_TRANSPORT_FAILED;
+		break;
+	}
+	if (result == USB_STOR_TRANSPORT_GOOD)
+		info->SrbStatus = SS_SUCCESS;
+	return result;
+}
+
+static int ene_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	int result = USB_STOR_XFER_GOOD;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
+
+	/*US_DEBUG(usb_stor_show_command(us, srb)); */
+	scsi_set_resid(srb, 0);
+	if (unlikely(!(info->SD_Status & SD_Ready) || (info->MS_Status & MS_Ready)))
+		result = ene_init(us);
+	if (result == USB_STOR_XFER_GOOD) {
+		result = USB_STOR_TRANSPORT_ERROR;
+		if (info->SD_Status & SD_Ready)
+			result = sd_scsi_irp(us, srb);
+
+		if (info->MS_Status & MS_Ready)
+			result = ms_scsi_irp(us, srb);
+	}
+	return result;
+}
+
+static struct scsi_host_template ene_ub6250_host_template;
+
+static int ene_ub6250_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	int result;
+	u8  misc_reg03;
+	struct us_data *us;
+	struct ene_ub6250_info *info;
+
+	result = usb_stor_probe1(&us, intf, id,
+		   (id - ene_ub6250_usb_ids) + ene_ub6250_unusual_dev_list,
+		   &ene_ub6250_host_template);
+	if (result)
+		return result;
+
+	/* FIXME: where should the code alloc extra buf ? */
+	us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL);
+	if (!us->extra)
+		return -ENOMEM;
+	us->extra_destructor = ene_ub6250_info_destructor;
+
+	info = (struct ene_ub6250_info *)(us->extra);
+	info->bbuf = kmalloc(512, GFP_KERNEL);
+	if (!info->bbuf) {
+		kfree(us->extra);
+		return -ENOMEM;
+	}
+
+	us->transport_name = "ene_ub6250";
+	us->transport = ene_transport;
+	us->max_lun = 0;
+
+	result = usb_stor_probe2(us);
+	if (result)
+		return result;
+
+	/* probe card type */
+	result = ene_get_card_type(us, REG_CARD_STATUS, info->bbuf);
+	if (result != USB_STOR_XFER_GOOD) {
+		usb_stor_disconnect(intf);
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	misc_reg03 = info->bbuf[0];
+	if (!(misc_reg03 & 0x01)) {
+		pr_info("ums_eneub6250: This driver only supports SD/MS cards. "
+			"It does not support SM cards.\n");
+	}
+
+	return result;
+}
+
+
+#ifdef CONFIG_PM
+
+static int ene_ub6250_resume(struct usb_interface *iface)
+{
+	struct us_data *us = usb_get_intfdata(iface);
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
+
+	mutex_lock(&us->dev_mutex);
+
+	if (us->suspend_resume_hook)
+		(us->suspend_resume_hook)(us, US_RESUME);
+
+	mutex_unlock(&us->dev_mutex);
+
+	info->Power_IsResum = true;
+	/* info->SD_Status &= ~SD_Ready; */
+	info->SD_Status = 0;
+	info->MS_Status = 0;
+	info->SM_Status = 0;
+
+	return 0;
+}
+
+static int ene_ub6250_reset_resume(struct usb_interface *iface)
+{
+	struct us_data *us = usb_get_intfdata(iface);
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
+
+	/* Report the reset to the SCSI core */
+	usb_stor_reset_resume(iface);
+
+	/*
+	 * FIXME: Notify the subdrivers that they need to reinitialize
+	 * the device
+	 */
+	info->Power_IsResum = true;
+	/* info->SD_Status &= ~SD_Ready; */
+	info->SD_Status = 0;
+	info->MS_Status = 0;
+	info->SM_Status = 0;
+
+	return 0;
+}
+
+#else
+
+#define ene_ub6250_resume		NULL
+#define ene_ub6250_reset_resume		NULL
+
+#endif
+
+static struct usb_driver ene_ub6250_driver = {
+	.name =		DRV_NAME,
+	.probe =	ene_ub6250_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	ene_ub6250_resume,
+	.reset_resume =	ene_ub6250_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	ene_ub6250_usb_ids,
+	.soft_unbind =	1,
+	.no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(ene_ub6250_driver, ene_ub6250_host_template, DRV_NAME);
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
new file mode 100644
index 000000000..2b098b55c
--- /dev/null
+++ b/drivers/usb/storage/freecom.c
@@ -0,0 +1,578 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Freecom USB/IDE adaptor
+ *
+ * Freecom v0.1:
+ *
+ * First release
+ *
+ * Current development and maintenance by:
+ *   (C) 2000 David Brown <usb-storage@davidb.org>
+ *
+ * This driver was developed with information provided in FREECOM's USB
+ * Programmers Reference Guide.  For further information contact Freecom
+ * (https://www.freecom.de/)
+ */
+
+#include <linux/module.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "scsiglue.h"
+
+#define DRV_NAME "ums-freecom"
+
+MODULE_DESCRIPTION("Driver for Freecom USB/IDE adaptor");
+MODULE_AUTHOR("David Brown <usb-storage@davidb.org>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(USB_STORAGE);
+
+#ifdef CONFIG_USB_STORAGE_DEBUG
+static void pdump(struct us_data *us, void *ibuffer, int length);
+#endif
+
+/* Bits of HD_STATUS */
+#define ERR_STAT		0x01
+#define DRQ_STAT		0x08
+
+/* All of the outgoing packets are 64 bytes long. */
+struct freecom_cb_wrap {
+	u8    Type;		/* Command type. */
+	u8    Timeout;		/* Timeout in seconds. */
+	u8    Atapi[12];	/* An ATAPI packet. */
+	u8    Filler[50];	/* Padding Data. */
+};
+
+struct freecom_xfer_wrap {
+	u8    Type;		/* Command type. */
+	u8    Timeout;		/* Timeout in seconds. */
+	__le32   Count;		/* Number of bytes to transfer. */
+	u8    Pad[58];
+} __attribute__ ((packed));
+
+struct freecom_ide_out {
+	u8    Type;		/* Type + IDE register. */
+	u8    Pad;
+	__le16   Value;		/* Value to write. */
+	u8    Pad2[60];
+};
+
+struct freecom_ide_in {
+	u8    Type;		/* Type | IDE register. */
+	u8    Pad[63];
+};
+
+struct freecom_status {
+	u8    Status;
+	u8    Reason;
+	__le16   Count;
+	u8    Pad[60];
+};
+
+/*
+ * Freecom stuffs the interrupt status in the INDEX_STAT bit of the ide
+ * register.
+ */
+#define FCM_INT_STATUS		0x02 /* INDEX_STAT */
+#define FCM_STATUS_BUSY		0x80
+
+/*
+ * These are the packet types.  The low bit indicates that this command
+ * should wait for an interrupt.
+ */
+#define FCM_PACKET_ATAPI	0x21
+#define FCM_PACKET_STATUS	0x20
+
+/*
+ * Receive data from the IDE interface.  The ATAPI packet has already
+ * waited, so the data should be immediately available.
+ */
+#define FCM_PACKET_INPUT	0x81
+
+/* Send data to the IDE interface. */
+#define FCM_PACKET_OUTPUT	0x01
+
+/*
+ * Write a value to an ide register.  Or the ide register to write after
+ * munging the address a bit.
+ */
+#define FCM_PACKET_IDE_WRITE	0x40
+#define FCM_PACKET_IDE_READ	0xC0
+
+/* All packets (except for status) are 64 bytes long. */
+#define FCM_PACKET_LENGTH		64
+#define FCM_STATUS_PACKET_LENGTH	4
+
+static int init_freecom(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+static struct usb_device_id freecom_usb_ids[] = {
+#	include "unusual_freecom.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, freecom_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev freecom_unusual_dev_list[] = {
+#	include "unusual_freecom.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+static int
+freecom_readdata (struct scsi_cmnd *srb, struct us_data *us,
+		unsigned int ipipe, unsigned int opipe, int count)
+{
+	struct freecom_xfer_wrap *fxfr =
+		(struct freecom_xfer_wrap *) us->iobuf;
+	int result;
+
+	fxfr->Type = FCM_PACKET_INPUT | 0x00;
+	fxfr->Timeout = 0;    /* Short timeout for debugging. */
+	fxfr->Count = cpu_to_le32 (count);
+	memset (fxfr->Pad, 0, sizeof (fxfr->Pad));
+
+	usb_stor_dbg(us, "Read data Freecom! (c=%d)\n", count);
+
+	/* Issue the transfer command. */
+	result = usb_stor_bulk_transfer_buf (us, opipe, fxfr,
+			FCM_PACKET_LENGTH, NULL);
+	if (result != USB_STOR_XFER_GOOD) {
+		usb_stor_dbg(us, "Freecom readdata transport error\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/* Now transfer all of our blocks. */
+	usb_stor_dbg(us, "Start of read\n");
+	result = usb_stor_bulk_srb(us, ipipe, srb);
+	usb_stor_dbg(us, "freecom_readdata done!\n");
+
+	if (result > USB_STOR_XFER_SHORT)
+		return USB_STOR_TRANSPORT_ERROR;
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int
+freecom_writedata (struct scsi_cmnd *srb, struct us_data *us,
+		int unsigned ipipe, unsigned int opipe, int count)
+{
+	struct freecom_xfer_wrap *fxfr =
+		(struct freecom_xfer_wrap *) us->iobuf;
+	int result;
+
+	fxfr->Type = FCM_PACKET_OUTPUT | 0x00;
+	fxfr->Timeout = 0;    /* Short timeout for debugging. */
+	fxfr->Count = cpu_to_le32 (count);
+	memset (fxfr->Pad, 0, sizeof (fxfr->Pad));
+
+	usb_stor_dbg(us, "Write data Freecom! (c=%d)\n", count);
+
+	/* Issue the transfer command. */
+	result = usb_stor_bulk_transfer_buf (us, opipe, fxfr,
+			FCM_PACKET_LENGTH, NULL);
+	if (result != USB_STOR_XFER_GOOD) {
+		usb_stor_dbg(us, "Freecom writedata transport error\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/* Now transfer all of our blocks. */
+	usb_stor_dbg(us, "Start of write\n");
+	result = usb_stor_bulk_srb(us, opipe, srb);
+
+	usb_stor_dbg(us, "freecom_writedata done!\n");
+	if (result > USB_STOR_XFER_SHORT)
+		return USB_STOR_TRANSPORT_ERROR;
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Transport for the Freecom USB/IDE adaptor.
+ *
+ */
+static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	struct freecom_cb_wrap *fcb;
+	struct freecom_status  *fst;
+	unsigned int ipipe, opipe;		/* We need both pipes. */
+	int result;
+	unsigned int partial;
+	int length;
+
+	fcb = (struct freecom_cb_wrap *) us->iobuf;
+	fst = (struct freecom_status *) us->iobuf;
+
+	usb_stor_dbg(us, "Freecom TRANSPORT STARTED\n");
+
+	/* Get handles for both transports. */
+	opipe = us->send_bulk_pipe;
+	ipipe = us->recv_bulk_pipe;
+
+	/* The ATAPI Command always goes out first. */
+	fcb->Type = FCM_PACKET_ATAPI | 0x00;
+	fcb->Timeout = 0;
+	memcpy (fcb->Atapi, srb->cmnd, 12);
+	memset (fcb->Filler, 0, sizeof (fcb->Filler));
+
+	US_DEBUG(pdump(us, srb->cmnd, 12));
+
+	/* Send it out. */
+	result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
+			FCM_PACKET_LENGTH, NULL);
+
+	/*
+	 * The Freecom device will only fail if there is something wrong in
+	 * USB land.  It returns the status in its own registers, which
+	 * come back in the bulk pipe.
+	 */
+	if (result != USB_STOR_XFER_GOOD) {
+		usb_stor_dbg(us, "freecom transport error\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/*
+	 * There are times we can optimize out this status read, but it
+	 * doesn't hurt us to always do it now.
+	 */
+	result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
+			FCM_STATUS_PACKET_LENGTH, &partial);
+	usb_stor_dbg(us, "foo Status result %d %u\n", result, partial);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	US_DEBUG(pdump(us, (void *)fst, partial));
+
+	/*
+	 * The firmware will time-out commands after 20 seconds. Some commands
+	 * can legitimately take longer than this, so we use a different
+	 * command that only waits for the interrupt and then sends status,
+	 * without having to send a new ATAPI command to the device.
+	 *
+	 * NOTE: There is some indication that a data transfer after a timeout
+	 * may not work, but that is a condition that should never happen.
+	 */
+	while (fst->Status & FCM_STATUS_BUSY) {
+		usb_stor_dbg(us, "20 second USB/ATAPI bridge TIMEOUT occurred!\n");
+		usb_stor_dbg(us, "fst->Status is %x\n", fst->Status);
+
+		/* Get the status again */
+		fcb->Type = FCM_PACKET_STATUS;
+		fcb->Timeout = 0;
+		memset (fcb->Atapi, 0, sizeof(fcb->Atapi));
+		memset (fcb->Filler, 0, sizeof (fcb->Filler));
+
+		/* Send it out. */
+		result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
+				FCM_PACKET_LENGTH, NULL);
+
+		/*
+		 * The Freecom device will only fail if there is something
+		 * wrong in USB land.  It returns the status in its own
+		 * registers, which come back in the bulk pipe.
+		 */
+		if (result != USB_STOR_XFER_GOOD) {
+			usb_stor_dbg(us, "freecom transport error\n");
+			return USB_STOR_TRANSPORT_ERROR;
+		}
+
+		/* get the data */
+		result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
+				FCM_STATUS_PACKET_LENGTH, &partial);
+
+		usb_stor_dbg(us, "bar Status result %d %u\n", result, partial);
+		if (result != USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		US_DEBUG(pdump(us, (void *)fst, partial));
+	}
+
+	if (partial != 4)
+		return USB_STOR_TRANSPORT_ERROR;
+	if ((fst->Status & 1) != 0) {
+		usb_stor_dbg(us, "operation failed\n");
+		return USB_STOR_TRANSPORT_FAILED;
+	}
+
+	/*
+	 * The device might not have as much data available as we
+	 * requested.  If you ask for more than the device has, this reads
+	 * and such will hang.
+	 */
+	usb_stor_dbg(us, "Device indicates that it has %d bytes available\n",
+		     le16_to_cpu(fst->Count));
+	usb_stor_dbg(us, "SCSI requested %d\n", scsi_bufflen(srb));
+
+	/* Find the length we desire to read. */
+	switch (srb->cmnd[0]) {
+	case INQUIRY:
+	case REQUEST_SENSE:	/* 16 or 18 bytes? spec says 18, lots of devices only have 16 */
+	case MODE_SENSE:
+	case MODE_SENSE_10:
+		length = le16_to_cpu(fst->Count);
+		break;
+	default:
+		length = scsi_bufflen(srb);
+	}
+
+	/* verify that this amount is legal */
+	if (length > scsi_bufflen(srb)) {
+		length = scsi_bufflen(srb);
+		usb_stor_dbg(us, "Truncating request to match buffer length: %d\n",
+			     length);
+	}
+
+	/*
+	 * What we do now depends on what direction the data is supposed to
+	 * move in.
+	 */
+
+	switch (us->srb->sc_data_direction) {
+	case DMA_FROM_DEVICE:
+		/* catch bogus "read 0 length" case */
+		if (!length)
+			break;
+		/*
+		 * Make sure that the status indicates that the device
+		 * wants data as well.
+		 */
+		if ((fst->Status & DRQ_STAT) == 0 || (fst->Reason & 3) != 2) {
+			usb_stor_dbg(us, "SCSI wants data, drive doesn't have any\n");
+			return USB_STOR_TRANSPORT_FAILED;
+		}
+		result = freecom_readdata (srb, us, ipipe, opipe, length);
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			return result;
+
+		usb_stor_dbg(us, "Waiting for status\n");
+		result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
+				FCM_PACKET_LENGTH, &partial);
+		US_DEBUG(pdump(us, (void *)fst, partial));
+
+		if (partial != 4 || result > USB_STOR_XFER_SHORT)
+			return USB_STOR_TRANSPORT_ERROR;
+		if ((fst->Status & ERR_STAT) != 0) {
+			usb_stor_dbg(us, "operation failed\n");
+			return USB_STOR_TRANSPORT_FAILED;
+		}
+		if ((fst->Reason & 3) != 3) {
+			usb_stor_dbg(us, "Drive seems still hungry\n");
+			return USB_STOR_TRANSPORT_FAILED;
+		}
+		usb_stor_dbg(us, "Transfer happy\n");
+		break;
+
+	case DMA_TO_DEVICE:
+		/* catch bogus "write 0 length" case */
+		if (!length)
+			break;
+		/*
+		 * Make sure the status indicates that the device wants to
+		 * send us data.
+		 */
+		/* !!IMPLEMENT!! */
+		result = freecom_writedata (srb, us, ipipe, opipe, length);
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			return result;
+
+		usb_stor_dbg(us, "Waiting for status\n");
+		result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
+				FCM_PACKET_LENGTH, &partial);
+
+		if (partial != 4 || result > USB_STOR_XFER_SHORT)
+			return USB_STOR_TRANSPORT_ERROR;
+		if ((fst->Status & ERR_STAT) != 0) {
+			usb_stor_dbg(us, "operation failed\n");
+			return USB_STOR_TRANSPORT_FAILED;
+		}
+		if ((fst->Reason & 3) != 3) {
+			usb_stor_dbg(us, "Drive seems still hungry\n");
+			return USB_STOR_TRANSPORT_FAILED;
+		}
+
+		usb_stor_dbg(us, "Transfer happy\n");
+		break;
+
+
+	case DMA_NONE:
+		/* Easy, do nothing. */
+		break;
+
+	default:
+		/* should never hit here -- filtered in usb.c */
+		usb_stor_dbg(us, "freecom unimplemented direction: %d\n",
+			     us->srb->sc_data_direction);
+		/* Return fail, SCSI seems to handle this better. */
+		return USB_STOR_TRANSPORT_FAILED;
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int init_freecom(struct us_data *us)
+{
+	int result;
+	char *buffer = us->iobuf;
+
+	/*
+	 * The DMA-mapped I/O buffer is 64 bytes long, just right for
+	 * all our packets.  No need to allocate any extra buffer space.
+	 */
+
+	result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
+			0x4c, 0xc0, 0x4346, 0x0, buffer, 0x20, 3*HZ);
+	buffer[32] = '\0';
+	usb_stor_dbg(us, "String returned from FC init is: %s\n", buffer);
+
+	/*
+	 * Special thanks to the people at Freecom for providing me with
+	 * this "magic sequence", which they use in their Windows and MacOS
+	 * drivers to make sure that all the attached perhiperals are
+	 * properly reset.
+	 */
+
+	/* send reset */
+	result = usb_stor_control_msg(us, us->send_ctrl_pipe,
+			0x4d, 0x40, 0x24d8, 0x0, NULL, 0x0, 3*HZ);
+	usb_stor_dbg(us, "result from activate reset is %d\n", result);
+
+	/* wait 250ms */
+	msleep(250);
+
+	/* clear reset */
+	result = usb_stor_control_msg(us, us->send_ctrl_pipe,
+			0x4d, 0x40, 0x24f8, 0x0, NULL, 0x0, 3*HZ);
+	usb_stor_dbg(us, "result from clear reset is %d\n", result);
+
+	/* wait 3 seconds */
+	msleep(3 * 1000);
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int usb_stor_freecom_reset(struct us_data *us)
+{
+	printk (KERN_CRIT "freecom reset called\n");
+
+	/* We don't really have this feature. */
+	return FAILED;
+}
+
+#ifdef CONFIG_USB_STORAGE_DEBUG
+static void pdump(struct us_data *us, void *ibuffer, int length)
+{
+	static char line[80];
+	int offset = 0;
+	unsigned char *buffer = (unsigned char *) ibuffer;
+	int i, j;
+	int from, base;
+
+	offset = 0;
+	for (i = 0; i < length; i++) {
+		if ((i & 15) == 0) {
+			if (i > 0) {
+				offset += sprintf (line+offset, " - ");
+				for (j = i - 16; j < i; j++) {
+					if (buffer[j] >= 32 && buffer[j] <= 126)
+						line[offset++] = buffer[j];
+					else
+						line[offset++] = '.';
+				}
+				line[offset] = 0;
+				usb_stor_dbg(us, "%s\n", line);
+				offset = 0;
+			}
+			offset += sprintf (line+offset, "%08x:", i);
+		} else if ((i & 7) == 0) {
+			offset += sprintf (line+offset, " -");
+		}
+		offset += sprintf (line+offset, " %02x", buffer[i] & 0xff);
+	}
+
+	/* Add the last "chunk" of data. */
+	from = (length - 1) % 16;
+	base = ((length - 1) / 16) * 16;
+
+	for (i = from + 1; i < 16; i++)
+		offset += sprintf (line+offset, "   ");
+	if (from < 8)
+		offset += sprintf (line+offset, "  ");
+	offset += sprintf (line+offset, " - ");
+
+	for (i = 0; i <= from; i++) {
+		if (buffer[base+i] >= 32 && buffer[base+i] <= 126)
+			line[offset++] = buffer[base+i];
+		else
+			line[offset++] = '.';
+	}
+	line[offset] = 0;
+	usb_stor_dbg(us, "%s\n", line);
+	offset = 0;
+}
+#endif
+
+static struct scsi_host_template freecom_host_template;
+
+static int freecom_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - freecom_usb_ids) + freecom_unusual_dev_list,
+			&freecom_host_template);
+	if (result)
+		return result;
+
+	us->transport_name = "Freecom";
+	us->transport = freecom_transport;
+	us->transport_reset = usb_stor_freecom_reset;
+	us->max_lun = 0;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver freecom_driver = {
+	.name =		DRV_NAME,
+	.probe =	freecom_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	freecom_usb_ids,
+	.soft_unbind =	1,
+	.no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(freecom_driver, freecom_host_template, DRV_NAME);
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
new file mode 100644
index 000000000..f8f9ce8dc
--- /dev/null
+++ b/drivers/usb/storage/initializers.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Special Initializers for certain USB Mass Storage devices
+ *
+ * Current development and maintenance by:
+ *   (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices.  Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document.  The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ */
+
+#include <linux/errno.h>
+
+#include "usb.h"
+#include "initializers.h"
+#include "debug.h"
+#include "transport.h"
+
+/*
+ * This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
+ * mode
+ */
+int usb_stor_euscsi_init(struct us_data *us)
+{
+	int result;
+
+	usb_stor_dbg(us, "Attempting to init eUSCSI bridge...\n");
+	result = usb_stor_control_msg(us, us->send_ctrl_pipe,
+			0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR,
+			0x01, 0x0, NULL, 0x0, 5 * HZ);
+	usb_stor_dbg(us, "-- result is %d\n", result);
+
+	return 0;
+}
+
+/*
+ * This function is required to activate all four slots on the UCR-61S2B
+ * flash reader
+ */
+int usb_stor_ucr61s2b_init(struct us_data *us)
+{
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap*) us->iobuf;
+	struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap*) us->iobuf;
+	int res;
+	unsigned int partial;
+	static char init_string[] = "\xec\x0a\x06\x00$PCCHIPS";
+
+	usb_stor_dbg(us, "Sending UCR-61S2B initialization packet...\n");
+
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->Tag = 0;
+	bcb->DataTransferLength = cpu_to_le32(0);
+	bcb->Flags = bcb->Lun = 0;
+	bcb->Length = sizeof(init_string) - 1;
+	memset(bcb->CDB, 0, sizeof(bcb->CDB));
+	memcpy(bcb->CDB, init_string, sizeof(init_string) - 1);
+
+	res = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb,
+			US_BULK_CB_WRAP_LEN, &partial);
+	if (res)
+		return -EIO;
+
+	usb_stor_dbg(us, "Getting status packet...\n");
+	res = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs,
+			US_BULK_CS_WRAP_LEN, &partial);
+	if (res)
+		return -EIO;
+
+	return 0;
+}
+
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us)
+{
+	int result;
+
+	result = usb_stor_control_msg(us, us->send_ctrl_pipe,
+				      USB_REQ_SET_FEATURE,
+				      USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+				      0x01, 0x0, NULL, 0x0, 1 * HZ);
+	usb_stor_dbg(us, "Huawei mode set result is %d\n", result);
+	return 0;
+}
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
new file mode 100644
index 000000000..dcd7b7e5e
--- /dev/null
+++ b/drivers/usb/storage/initializers.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Header file for Special Initializers for certain USB Mass Storage devices
+ *
+ * Current development and maintenance by:
+ *   (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices.  Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document.  The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ */
+
+#include "usb.h"
+#include "transport.h"
+
+/*
+ * This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
+ * mode
+ */
+int usb_stor_euscsi_init(struct us_data *us);
+
+/*
+ * This function is required to activate all four slots on the UCR-61S2B
+ * flash reader
+ */
+int usb_stor_ucr61s2b_init(struct us_data *us);
+
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us);
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
new file mode 100644
index 000000000..4e0eef144
--- /dev/null
+++ b/drivers/usb/storage/isd200.c
@@ -0,0 +1,1573 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Transport & Protocol Driver for In-System Design, Inc. ISD200 ASIC
+ *
+ * Current development and maintenance:
+ *   (C) 2001-2002 Björn Stenberg (bjorn@haxx.se)
+ *
+ * Developed with the assistance of:
+ *   (C) 2002 Alan Stern <stern@rowland.org>
+ *
+ * Initial work:
+ *   (C) 2000 In-System Design, Inc. (support@in-system.com)
+ *
+ * The ISD200 ASIC does not natively support ATA devices.  The chip
+ * does implement an interface, the ATA Command Block (ATACB) which provides
+ * a means of passing ATA commands and ATA register accesses to a device.
+ *
+ * History:
+ *
+ *  2002-10-19: Removed the specialized transfer routines.
+ *		(Alan Stern <stern@rowland.harvard.edu>)
+ *  2001-02-24: Removed lots of duplicate code and simplified the structure.
+ *	      (bjorn@haxx.se)
+ *  2002-01-16: Fixed endianness bug so it works on the ppc arch.
+ *	      (Luc Saillard <luc@saillard.org>)
+ *  2002-01-17: All bitfields removed.
+ *	      (bjorn@haxx.se)
+ */
+
+
+/* Include files */
+
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ata.h>
+#include <linux/hdreg.h>
+#include <linux/scatterlist.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "scsiglue.h"
+
+#define DRV_NAME "ums-isd200"
+
+MODULE_DESCRIPTION("Driver for In-System Design, Inc. ISD200 ASIC");
+MODULE_AUTHOR("Björn Stenberg <bjorn@haxx.se>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(USB_STORAGE);
+
+static int isd200_Initialization(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+static struct usb_device_id isd200_usb_ids[] = {
+#	include "unusual_isd200.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, isd200_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev isd200_unusual_dev_list[] = {
+#	include "unusual_isd200.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+/* Timeout defines (in Seconds) */
+
+#define ISD200_ENUM_BSY_TIMEOUT		35
+#define ISD200_ENUM_DETECT_TIMEOUT      30
+#define ISD200_DEFAULT_TIMEOUT		30
+
+/* device flags */
+#define DF_ATA_DEVICE		0x0001
+#define DF_MEDIA_STATUS_ENABLED	0x0002
+#define DF_REMOVABLE_MEDIA	0x0004
+
+/* capability bit definitions */
+#define CAPABILITY_DMA		0x01
+#define CAPABILITY_LBA		0x02
+
+/* command_setX bit definitions */
+#define COMMANDSET_REMOVABLE	0x02
+#define COMMANDSET_MEDIA_STATUS 0x10
+
+/* ATA Vendor Specific defines */
+#define ATA_ADDRESS_DEVHEAD_STD      0xa0
+#define ATA_ADDRESS_DEVHEAD_LBA_MODE 0x40    
+#define ATA_ADDRESS_DEVHEAD_SLAVE    0x10
+
+/* Action Select bits */
+#define ACTION_SELECT_0	     0x01
+#define ACTION_SELECT_1	     0x02
+#define ACTION_SELECT_2	     0x04
+#define ACTION_SELECT_3	     0x08
+#define ACTION_SELECT_4	     0x10
+#define ACTION_SELECT_5	     0x20
+#define ACTION_SELECT_6	     0x40
+#define ACTION_SELECT_7	     0x80
+
+/* Register Select bits */
+#define REG_ALTERNATE_STATUS	0x01
+#define REG_DEVICE_CONTROL	0x01
+#define REG_ERROR		0x02
+#define REG_FEATURES		0x02
+#define REG_SECTOR_COUNT	0x04
+#define REG_SECTOR_NUMBER	0x08
+#define REG_CYLINDER_LOW	0x10
+#define REG_CYLINDER_HIGH	0x20
+#define REG_DEVICE_HEAD		0x40
+#define REG_STATUS		0x80
+#define REG_COMMAND		0x80
+
+/* ATA registers offset definitions */
+#define ATA_REG_ERROR_OFFSET		1
+#define ATA_REG_LCYL_OFFSET		4
+#define ATA_REG_HCYL_OFFSET		5
+#define ATA_REG_STATUS_OFFSET		7
+
+/* ATA error definitions not in <linux/hdreg.h> */
+#define ATA_ERROR_MEDIA_CHANGE		0x20
+
+/* ATA command definitions not in <linux/hdreg.h> */
+#define ATA_COMMAND_GET_MEDIA_STATUS	0xDA
+#define ATA_COMMAND_MEDIA_EJECT		0xED
+
+/* ATA drive control definitions */
+#define ATA_DC_DISABLE_INTERRUPTS	0x02
+#define ATA_DC_RESET_CONTROLLER		0x04
+#define ATA_DC_REENABLE_CONTROLLER	0x00
+
+/*
+ *  General purpose return codes
+ */ 
+
+#define ISD200_ERROR		-1
+#define ISD200_GOOD		 0
+
+/*
+ * Transport return codes
+ */
+
+#define ISD200_TRANSPORT_GOOD       0   /* Transport good, command good     */
+#define ISD200_TRANSPORT_FAILED     1   /* Transport good, command failed   */
+#define ISD200_TRANSPORT_ERROR      2   /* Transport bad (i.e. device dead) */
+
+/* driver action codes */
+#define	ACTION_READ_STATUS	0
+#define	ACTION_RESET		1
+#define	ACTION_REENABLE		2
+#define	ACTION_SOFT_RESET	3
+#define	ACTION_ENUM		4
+#define	ACTION_IDENTIFY		5
+
+
+/*
+ * ata_cdb struct
+ */
+
+
+union ata_cdb {
+	struct {
+		unsigned char SignatureByte0;
+		unsigned char SignatureByte1;
+		unsigned char ActionSelect;
+		unsigned char RegisterSelect;
+		unsigned char TransferBlockSize;
+		unsigned char WriteData3F6;
+		unsigned char WriteData1F1;
+		unsigned char WriteData1F2;
+		unsigned char WriteData1F3;
+		unsigned char WriteData1F4;
+		unsigned char WriteData1F5;
+		unsigned char WriteData1F6;
+		unsigned char WriteData1F7;
+		unsigned char Reserved[3];
+	} generic;
+
+	struct {
+		unsigned char SignatureByte0;
+		unsigned char SignatureByte1;
+		unsigned char ActionSelect;
+		unsigned char RegisterSelect;
+		unsigned char TransferBlockSize;
+		unsigned char AlternateStatusByte;
+		unsigned char ErrorByte;
+		unsigned char SectorCountByte;
+		unsigned char SectorNumberByte;
+		unsigned char CylinderLowByte;
+		unsigned char CylinderHighByte;
+		unsigned char DeviceHeadByte;
+		unsigned char StatusByte;
+		unsigned char Reserved[3];
+	} read;
+
+	struct {
+		unsigned char SignatureByte0;
+		unsigned char SignatureByte1;
+		unsigned char ActionSelect;
+		unsigned char RegisterSelect;
+		unsigned char TransferBlockSize;
+		unsigned char DeviceControlByte;
+		unsigned char FeaturesByte;
+		unsigned char SectorCountByte;
+		unsigned char SectorNumberByte;
+		unsigned char CylinderLowByte;
+		unsigned char CylinderHighByte;
+		unsigned char DeviceHeadByte;
+		unsigned char CommandByte;
+		unsigned char Reserved[3];
+	} write;
+};
+
+
+/*
+ * Inquiry data structure. This is the data returned from the target
+ * after it receives an inquiry.
+ *
+ * This structure may be extended by the number of bytes specified
+ * in the field AdditionalLength. The defined size constant only
+ * includes fields through ProductRevisionLevel.
+ */
+
+/*
+ * DeviceType field
+ */
+#define DIRECT_ACCESS_DEVICE	    0x00    /* disks */
+#define DEVICE_REMOVABLE		0x80
+
+struct inquiry_data {
+   	unsigned char DeviceType;
+	unsigned char DeviceTypeModifier;
+	unsigned char Versions;
+	unsigned char Format; 
+	unsigned char AdditionalLength;
+	unsigned char Reserved[2];
+	unsigned char Capability;
+	unsigned char VendorId[8];
+	unsigned char ProductId[16];
+	unsigned char ProductRevisionLevel[4];
+	unsigned char VendorSpecific[20];
+	unsigned char Reserved3[40];
+} __attribute__ ((packed));
+
+/*
+ * INQUIRY data buffer size
+ */
+
+#define INQUIRYDATABUFFERSIZE 36
+
+
+/*
+ * ISD200 CONFIG data struct
+ */
+
+#define ATACFG_TIMING	  0x0f
+#define ATACFG_ATAPI_RESET     0x10
+#define ATACFG_MASTER	  0x20
+#define ATACFG_BLOCKSIZE       0xa0
+
+#define ATACFGE_LAST_LUN       0x07
+#define ATACFGE_DESC_OVERRIDE  0x08
+#define ATACFGE_STATE_SUSPEND  0x10
+#define ATACFGE_SKIP_BOOT      0x20
+#define ATACFGE_CONF_DESC2     0x40
+#define ATACFGE_INIT_STATUS    0x80
+
+#define CFG_CAPABILITY_SRST    0x01
+
+struct isd200_config {
+	unsigned char EventNotification;
+	unsigned char ExternalClock;
+	unsigned char ATAInitTimeout;
+	unsigned char ATAConfig;
+	unsigned char ATAMajorCommand;
+	unsigned char ATAMinorCommand;
+	unsigned char ATAExtraConfig;
+	unsigned char Capability;
+}__attribute__ ((packed));
+
+
+/*
+ * ISD200 driver information struct
+ */
+
+struct isd200_info {
+	struct inquiry_data InquiryData;
+	u16 *id;
+	struct isd200_config ConfigData;
+	unsigned char *RegsBuf;
+	unsigned char ATARegs[8];
+	unsigned char DeviceHead;
+	unsigned char DeviceFlags;
+
+	/* maximum number of LUNs supported */
+	unsigned char MaxLUNs;
+	unsigned char cmnd[MAX_COMMAND_SIZE];
+	struct scsi_cmnd srb;
+	struct scatterlist sg;
+};
+
+
+/*
+ * Read Capacity Data - returned in Big Endian format
+ */
+
+struct read_capacity_data {
+	__be32 LogicalBlockAddress;
+	__be32 BytesPerBlock;
+};
+
+/*
+ * Read Block Limits Data - returned in Big Endian format
+ * This structure returns the maximum and minimum block
+ * size for a TAPE device.
+ */
+
+struct read_block_limits {
+	unsigned char Reserved;
+	unsigned char BlockMaximumSize[3];
+	unsigned char BlockMinimumSize[2];
+};
+
+
+/*
+ * Sense Data Format
+ */
+
+#define SENSE_ERRCODE	   0x7f
+#define SENSE_ERRCODE_VALID     0x80
+#define SENSE_FLAG_SENSE_KEY    0x0f
+#define SENSE_FLAG_BAD_LENGTH   0x20
+#define SENSE_FLAG_END_OF_MEDIA 0x40
+#define SENSE_FLAG_FILE_MARK    0x80
+struct sense_data {
+	unsigned char ErrorCode;
+	unsigned char SegmentNumber;
+	unsigned char Flags;
+	unsigned char Information[4];
+	unsigned char AdditionalSenseLength;
+	unsigned char CommandSpecificInformation[4];
+	unsigned char AdditionalSenseCode;
+	unsigned char AdditionalSenseCodeQualifier;
+	unsigned char FieldReplaceableUnitCode;
+	unsigned char SenseKeySpecific[3];
+} __attribute__ ((packed));
+
+/*
+ * Default request sense buffer size
+ */
+
+#define SENSE_BUFFER_SIZE 18
+
+/***********************************************************************
+ * Helper routines
+ ***********************************************************************/
+
+/**************************************************************************
+ * isd200_build_sense
+ *									 
+ *  Builds an artificial sense buffer to report the results of a 
+ *  failed command.
+ *								       
+ * RETURNS:
+ *    void
+ */
+static void isd200_build_sense(struct us_data *us, struct scsi_cmnd *srb)
+{
+	struct isd200_info *info = (struct isd200_info *)us->extra;
+	struct sense_data *buf = (struct sense_data *) &srb->sense_buffer[0];
+	unsigned char error = info->ATARegs[ATA_REG_ERROR_OFFSET];
+
+	if(error & ATA_ERROR_MEDIA_CHANGE) {
+		buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
+		buf->AdditionalSenseLength = 0xb;
+		buf->Flags = UNIT_ATTENTION;
+		buf->AdditionalSenseCode = 0;
+		buf->AdditionalSenseCodeQualifier = 0;
+	} else if (error & ATA_MCR) {
+		buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
+		buf->AdditionalSenseLength = 0xb;
+		buf->Flags =  UNIT_ATTENTION;
+		buf->AdditionalSenseCode = 0;
+		buf->AdditionalSenseCodeQualifier = 0;
+	} else if (error & ATA_TRK0NF) {
+		buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
+		buf->AdditionalSenseLength = 0xb;
+		buf->Flags =  NOT_READY;
+		buf->AdditionalSenseCode = 0;
+		buf->AdditionalSenseCodeQualifier = 0;
+	} else if (error & ATA_UNC) {
+		buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
+		buf->AdditionalSenseLength = 0xb;
+		buf->Flags =  DATA_PROTECT;
+		buf->AdditionalSenseCode = 0;
+		buf->AdditionalSenseCodeQualifier = 0;
+	} else {
+		buf->ErrorCode = 0;
+		buf->AdditionalSenseLength = 0;
+		buf->Flags =  0;
+		buf->AdditionalSenseCode = 0;
+		buf->AdditionalSenseCodeQualifier = 0;
+	}
+}
+
+
+/***********************************************************************
+ * Transport routines
+ ***********************************************************************/
+
+/**************************************************************************
+ *  isd200_set_srb(), isd200_srb_set_bufflen()
+ *
+ * Two helpers to facilitate in initialization of scsi_cmnd structure
+ * Will need to change when struct scsi_cmnd changes
+ */
+static void isd200_set_srb(struct isd200_info *info,
+	enum dma_data_direction dir, void* buff, unsigned bufflen)
+{
+	struct scsi_cmnd *srb = &info->srb;
+
+	if (buff)
+		sg_init_one(&info->sg, buff, bufflen);
+
+	srb->sc_data_direction = dir;
+	srb->sdb.table.sgl = buff ? &info->sg : NULL;
+	srb->sdb.length = bufflen;
+	srb->sdb.table.nents = buff ? 1 : 0;
+}
+
+static void isd200_srb_set_bufflen(struct scsi_cmnd *srb, unsigned bufflen)
+{
+	srb->sdb.length = bufflen;
+}
+
+
+/**************************************************************************
+ *  isd200_action
+ *
+ * Routine for sending commands to the isd200
+ *
+ * RETURNS:
+ *    ISD status code
+ */
+static int isd200_action( struct us_data *us, int action, 
+			  void* pointer, int value )
+{
+	union ata_cdb ata;
+	/* static to prevent this large struct being placed on the valuable stack */
+	static struct scsi_device srb_dev;
+	struct isd200_info *info = (struct isd200_info *)us->extra;
+	struct scsi_cmnd *srb = &info->srb;
+	int status;
+
+	memset(&ata, 0, sizeof(ata));
+	memcpy(srb->cmnd, info->cmnd, MAX_COMMAND_SIZE);
+	srb->device = &srb_dev;
+
+	ata.generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
+	ata.generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
+	ata.generic.TransferBlockSize = 1;
+
+	switch ( action ) {
+	case ACTION_READ_STATUS:
+		usb_stor_dbg(us, "   isd200_action(READ_STATUS)\n");
+		ata.generic.ActionSelect = ACTION_SELECT_0|ACTION_SELECT_2;
+		ata.generic.RegisterSelect =
+		  REG_CYLINDER_LOW | REG_CYLINDER_HIGH |
+		  REG_STATUS | REG_ERROR;
+		isd200_set_srb(info, DMA_FROM_DEVICE, pointer, value);
+		break;
+
+	case ACTION_ENUM:
+		usb_stor_dbg(us, "   isd200_action(ENUM,0x%02x)\n", value);
+		ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2|
+					   ACTION_SELECT_3|ACTION_SELECT_4|
+					   ACTION_SELECT_5;
+		ata.generic.RegisterSelect = REG_DEVICE_HEAD;
+		ata.write.DeviceHeadByte = value;
+		isd200_set_srb(info, DMA_NONE, NULL, 0);
+		break;
+
+	case ACTION_RESET:
+		usb_stor_dbg(us, "   isd200_action(RESET)\n");
+		ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2|
+					   ACTION_SELECT_3|ACTION_SELECT_4;
+		ata.generic.RegisterSelect = REG_DEVICE_CONTROL;
+		ata.write.DeviceControlByte = ATA_DC_RESET_CONTROLLER;
+		isd200_set_srb(info, DMA_NONE, NULL, 0);
+		break;
+
+	case ACTION_REENABLE:
+		usb_stor_dbg(us, "   isd200_action(REENABLE)\n");
+		ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2|
+					   ACTION_SELECT_3|ACTION_SELECT_4;
+		ata.generic.RegisterSelect = REG_DEVICE_CONTROL;
+		ata.write.DeviceControlByte = ATA_DC_REENABLE_CONTROLLER;
+		isd200_set_srb(info, DMA_NONE, NULL, 0);
+		break;
+
+	case ACTION_SOFT_RESET:
+		usb_stor_dbg(us, "   isd200_action(SOFT_RESET)\n");
+		ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_5;
+		ata.generic.RegisterSelect = REG_DEVICE_HEAD | REG_COMMAND;
+		ata.write.DeviceHeadByte = info->DeviceHead;
+		ata.write.CommandByte = ATA_CMD_DEV_RESET;
+		isd200_set_srb(info, DMA_NONE, NULL, 0);
+		break;
+
+	case ACTION_IDENTIFY:
+		usb_stor_dbg(us, "   isd200_action(IDENTIFY)\n");
+		ata.generic.RegisterSelect = REG_COMMAND;
+		ata.write.CommandByte = ATA_CMD_ID_ATA;
+		isd200_set_srb(info, DMA_FROM_DEVICE, info->id,
+				ATA_ID_WORDS * 2);
+		break;
+
+	default:
+		usb_stor_dbg(us, "Error: Undefined action %d\n", action);
+		return ISD200_ERROR;
+	}
+
+	memcpy(srb->cmnd, &ata, sizeof(ata.generic));
+	srb->cmd_len = sizeof(ata.generic);
+	status = usb_stor_Bulk_transport(srb, us);
+	if (status == USB_STOR_TRANSPORT_GOOD)
+		status = ISD200_GOOD;
+	else {
+		usb_stor_dbg(us, "   isd200_action(0x%02x) error: %d\n",
+			     action, status);
+		status = ISD200_ERROR;
+		/* need to reset device here */
+	}
+
+	return status;
+}
+
+/**************************************************************************
+ * isd200_read_regs
+ *									 
+ * Read ATA Registers
+ *
+ * RETURNS:
+ *    ISD status code
+ */
+static int isd200_read_regs( struct us_data *us )
+{
+	struct isd200_info *info = (struct isd200_info *)us->extra;
+	int retStatus = ISD200_GOOD;
+	int transferStatus;
+
+	usb_stor_dbg(us, "Entering isd200_IssueATAReadRegs\n");
+
+	transferStatus = isd200_action( us, ACTION_READ_STATUS,
+				    info->RegsBuf, sizeof(info->ATARegs) );
+	if (transferStatus != ISD200_TRANSPORT_GOOD) {
+		usb_stor_dbg(us, "   Error reading ATA registers\n");
+		retStatus = ISD200_ERROR;
+	} else {
+		memcpy(info->ATARegs, info->RegsBuf, sizeof(info->ATARegs));
+		usb_stor_dbg(us, "   Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n",
+			     info->ATARegs[ATA_REG_ERROR_OFFSET]);
+	}
+
+	return retStatus;
+}
+
+
+/**************************************************************************
+ * Invoke the transport and basic error-handling/recovery methods
+ *
+ * This is used by the protocol layers to actually send the message to
+ * the device and receive the response.
+ */
+static void isd200_invoke_transport( struct us_data *us, 
+			      struct scsi_cmnd *srb, 
+			      union ata_cdb *ataCdb )
+{
+	int need_auto_sense = 0;
+	int transferStatus;
+	int result;
+
+	/* send the command to the transport layer */
+	memcpy(srb->cmnd, ataCdb, sizeof(ataCdb->generic));
+	srb->cmd_len = sizeof(ataCdb->generic);
+	transferStatus = usb_stor_Bulk_transport(srb, us);
+
+	/*
+	 * if the command gets aborted by the higher layers, we need to
+	 * short-circuit all other processing
+	 */
+	if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
+		usb_stor_dbg(us, "-- command was aborted\n");
+		goto Handle_Abort;
+	}
+
+	switch (transferStatus) {
+
+	case USB_STOR_TRANSPORT_GOOD:
+		/* Indicate a good result */
+		srb->result = SAM_STAT_GOOD;
+		break;
+
+	case USB_STOR_TRANSPORT_NO_SENSE:
+		usb_stor_dbg(us, "-- transport indicates protocol failure\n");
+		srb->result = SAM_STAT_CHECK_CONDITION;
+		return;
+
+	case USB_STOR_TRANSPORT_FAILED:
+		usb_stor_dbg(us, "-- transport indicates command failure\n");
+		need_auto_sense = 1;
+		break;
+
+	case USB_STOR_TRANSPORT_ERROR:
+		usb_stor_dbg(us, "-- transport indicates transport error\n");
+		srb->result = DID_ERROR << 16;
+		/* Need reset here */
+		return;
+    
+	default:
+		usb_stor_dbg(us, "-- transport indicates unknown error\n");
+		srb->result = DID_ERROR << 16;
+		/* Need reset here */
+		return;
+	}
+
+	if ((scsi_get_resid(srb) > 0) &&
+	    !((srb->cmnd[0] == REQUEST_SENSE) ||
+	      (srb->cmnd[0] == INQUIRY) ||
+	      (srb->cmnd[0] == MODE_SENSE) ||
+	      (srb->cmnd[0] == LOG_SENSE) ||
+	      (srb->cmnd[0] == MODE_SENSE_10))) {
+		usb_stor_dbg(us, "-- unexpectedly short transfer\n");
+		need_auto_sense = 1;
+	}
+
+	if (need_auto_sense) {
+		result = isd200_read_regs(us);
+		if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
+			usb_stor_dbg(us, "-- auto-sense aborted\n");
+			goto Handle_Abort;
+		}
+		if (result == ISD200_GOOD) {
+			isd200_build_sense(us, srb);
+			srb->result = SAM_STAT_CHECK_CONDITION;
+
+			/* If things are really okay, then let's show that */
+			if ((srb->sense_buffer[2] & 0xf) == 0x0)
+				srb->result = SAM_STAT_GOOD;
+		} else {
+			srb->result = DID_ERROR << 16;
+			/* Need reset here */
+		}
+	}
+
+	/*
+	 * Regardless of auto-sense, if we _know_ we have an error
+	 * condition, show that in the result code
+	 */
+	if (transferStatus == USB_STOR_TRANSPORT_FAILED)
+		srb->result = SAM_STAT_CHECK_CONDITION;
+	return;
+
+	/*
+	 * abort processing: the bulk-only transport requires a reset
+	 * following an abort
+	 */
+	Handle_Abort:
+	srb->result = DID_ABORT << 16;
+
+	/* permit the reset transfer to take place */
+	clear_bit(US_FLIDX_ABORTING, &us->dflags);
+	/* Need reset here */
+}
+
+#ifdef CONFIG_USB_STORAGE_DEBUG
+static void isd200_log_config(struct us_data *us, struct isd200_info *info)
+{
+	usb_stor_dbg(us, "      Event Notification: 0x%x\n",
+		     info->ConfigData.EventNotification);
+	usb_stor_dbg(us, "      External Clock: 0x%x\n",
+		     info->ConfigData.ExternalClock);
+	usb_stor_dbg(us, "      ATA Init Timeout: 0x%x\n",
+		     info->ConfigData.ATAInitTimeout);
+	usb_stor_dbg(us, "      ATAPI Command Block Size: 0x%x\n",
+		     (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6);
+	usb_stor_dbg(us, "      Master/Slave Selection: 0x%x\n",
+		     info->ConfigData.ATAConfig & ATACFG_MASTER);
+	usb_stor_dbg(us, "      ATAPI Reset: 0x%x\n",
+		     info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET);
+	usb_stor_dbg(us, "      ATA Timing: 0x%x\n",
+		     info->ConfigData.ATAConfig & ATACFG_TIMING);
+	usb_stor_dbg(us, "      ATA Major Command: 0x%x\n",
+		     info->ConfigData.ATAMajorCommand);
+	usb_stor_dbg(us, "      ATA Minor Command: 0x%x\n",
+		     info->ConfigData.ATAMinorCommand);
+	usb_stor_dbg(us, "      Init Status: 0x%x\n",
+		     info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS);
+	usb_stor_dbg(us, "      Config Descriptor 2: 0x%x\n",
+		     info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2);
+	usb_stor_dbg(us, "      Skip Device Boot: 0x%x\n",
+		     info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT);
+	usb_stor_dbg(us, "      ATA 3 State Suspend: 0x%x\n",
+		     info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND);
+	usb_stor_dbg(us, "      Descriptor Override: 0x%x\n",
+		     info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE);
+	usb_stor_dbg(us, "      Last LUN Identifier: 0x%x\n",
+		     info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN);
+	usb_stor_dbg(us, "      SRST Enable: 0x%x\n",
+		     info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST);
+}
+#endif
+
+/**************************************************************************
+ * isd200_write_config
+ *									 
+ * Write the ISD200 Configuration data
+ *
+ * RETURNS:
+ *    ISD status code
+ */
+static int isd200_write_config( struct us_data *us ) 
+{
+	struct isd200_info *info = (struct isd200_info *)us->extra;
+	int retStatus = ISD200_GOOD;
+	int result;
+
+#ifdef CONFIG_USB_STORAGE_DEBUG
+	usb_stor_dbg(us, "Entering isd200_write_config\n");
+	usb_stor_dbg(us, "   Writing the following ISD200 Config Data:\n");
+	isd200_log_config(us, info);
+#endif
+
+	/* let's send the command via the control pipe */
+	result = usb_stor_ctrl_transfer(
+		us, 
+		us->send_ctrl_pipe,
+		0x01, 
+		USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+		0x0000, 
+		0x0002, 
+		(void *) &info->ConfigData, 
+		sizeof(info->ConfigData));
+
+	if (result >= 0) {
+		usb_stor_dbg(us, "   ISD200 Config Data was written successfully\n");
+	} else {
+		usb_stor_dbg(us, "   Request to write ISD200 Config Data failed!\n");
+		retStatus = ISD200_ERROR;
+	}
+
+	usb_stor_dbg(us, "Leaving isd200_write_config %08X\n", retStatus);
+	return retStatus;
+}
+
+
+/**************************************************************************
+ * isd200_read_config
+ *									 
+ * Reads the ISD200 Configuration data
+ *
+ * RETURNS:
+ *    ISD status code
+ */
+static int isd200_read_config( struct us_data *us ) 
+{
+	struct isd200_info *info = (struct isd200_info *)us->extra;
+	int retStatus = ISD200_GOOD;
+	int result;
+
+	usb_stor_dbg(us, "Entering isd200_read_config\n");
+
+	/* read the configuration information from ISD200.  Use this to */
+	/* determine what the special ATA CDB bytes are.		*/
+
+	result = usb_stor_ctrl_transfer(
+		us, 
+		us->recv_ctrl_pipe,
+		0x02, 
+		USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+		0x0000, 
+		0x0002, 
+		(void *) &info->ConfigData, 
+		sizeof(info->ConfigData));
+
+
+	if (result >= 0) {
+		usb_stor_dbg(us, "   Retrieved the following ISD200 Config Data:\n");
+#ifdef CONFIG_USB_STORAGE_DEBUG
+		isd200_log_config(us, info);
+#endif
+	} else {
+		usb_stor_dbg(us, "   Request to get ISD200 Config Data failed!\n");
+		retStatus = ISD200_ERROR;
+	}
+
+	usb_stor_dbg(us, "Leaving isd200_read_config %08X\n", retStatus);
+	return retStatus;
+}
+
+
+/**************************************************************************
+ * isd200_atapi_soft_reset
+ *									 
+ * Perform an Atapi Soft Reset on the device
+ *
+ * RETURNS:
+ *    NT status code
+ */
+static int isd200_atapi_soft_reset( struct us_data *us ) 
+{
+	int retStatus = ISD200_GOOD;
+	int transferStatus;
+
+	usb_stor_dbg(us, "Entering isd200_atapi_soft_reset\n");
+
+	transferStatus = isd200_action( us, ACTION_SOFT_RESET, NULL, 0 );
+	if (transferStatus != ISD200_TRANSPORT_GOOD) {
+		usb_stor_dbg(us, "   Error issuing Atapi Soft Reset\n");
+		retStatus = ISD200_ERROR;
+	}
+
+	usb_stor_dbg(us, "Leaving isd200_atapi_soft_reset %08X\n", retStatus);
+	return retStatus;
+}
+
+
+/**************************************************************************
+ * isd200_srst
+ *									 
+ * Perform an SRST on the device
+ *
+ * RETURNS:
+ *    ISD status code
+ */
+static int isd200_srst( struct us_data *us ) 
+{
+	int retStatus = ISD200_GOOD;
+	int transferStatus;
+
+	usb_stor_dbg(us, "Entering isd200_SRST\n");
+
+	transferStatus = isd200_action( us, ACTION_RESET, NULL, 0 );
+
+	/* check to see if this request failed */
+	if (transferStatus != ISD200_TRANSPORT_GOOD) {
+		usb_stor_dbg(us, "   Error issuing SRST\n");
+		retStatus = ISD200_ERROR;
+	} else {
+		/* delay 10ms to give the drive a chance to see it */
+		msleep(10);
+
+		transferStatus = isd200_action( us, ACTION_REENABLE, NULL, 0 );
+		if (transferStatus != ISD200_TRANSPORT_GOOD) {
+			usb_stor_dbg(us, "   Error taking drive out of reset\n");
+			retStatus = ISD200_ERROR;
+		} else {
+			/* delay 50ms to give the drive a chance to recover after SRST */
+			msleep(50);
+		}
+	}
+
+	usb_stor_dbg(us, "Leaving isd200_srst %08X\n", retStatus);
+	return retStatus;
+}
+
+
+/**************************************************************************
+ * isd200_try_enum
+ *									 
+ * Helper function for isd200_manual_enum(). Does ENUM and READ_STATUS
+ * and tries to analyze the status registers
+ *
+ * RETURNS:
+ *    ISD status code
+ */
+static int isd200_try_enum(struct us_data *us, unsigned char master_slave,
+			   int detect )
+{
+	int status = ISD200_GOOD;
+	unsigned long endTime;
+	struct isd200_info *info = (struct isd200_info *)us->extra;
+	unsigned char *regs = info->RegsBuf;
+	int recheckAsMaster = 0;
+
+	if ( detect )
+		endTime = jiffies + ISD200_ENUM_DETECT_TIMEOUT * HZ;
+	else
+		endTime = jiffies + ISD200_ENUM_BSY_TIMEOUT * HZ;
+
+	/* loop until we detect !BSY or timeout */
+	while(1) {
+
+		status = isd200_action( us, ACTION_ENUM, NULL, master_slave );
+		if ( status != ISD200_GOOD )
+			break;
+
+		status = isd200_action( us, ACTION_READ_STATUS, 
+					regs, 8 );
+		if ( status != ISD200_GOOD )
+			break;
+
+		if (!detect) {
+			if (regs[ATA_REG_STATUS_OFFSET] & ATA_BUSY) {
+				usb_stor_dbg(us, "   %s status is still BSY, try again...\n",
+					     master_slave == ATA_ADDRESS_DEVHEAD_STD ?
+					     "Master" : "Slave");
+			} else {
+				usb_stor_dbg(us, "   %s status !BSY, continue with next operation\n",
+					     master_slave == ATA_ADDRESS_DEVHEAD_STD ?
+					     "Master" : "Slave");
+				break;
+			}
+		}
+		/* check for ATA_BUSY and */
+		/* ATA_DF (workaround ATA Zip drive) and */
+		/* ATA_ERR (workaround for Archos CD-ROM) */
+		else if (regs[ATA_REG_STATUS_OFFSET] &
+			 (ATA_BUSY | ATA_DF | ATA_ERR)) {
+			usb_stor_dbg(us, "   Status indicates it is not ready, try again...\n");
+		}
+		/* check for DRDY, ATA devices set DRDY after SRST */
+		else if (regs[ATA_REG_STATUS_OFFSET] & ATA_DRDY) {
+			usb_stor_dbg(us, "   Identified ATA device\n");
+			info->DeviceFlags |= DF_ATA_DEVICE;
+			info->DeviceHead = master_slave;
+			break;
+		} 
+		/*
+		 * check Cylinder High/Low to
+		 * determine if it is an ATAPI device
+		 */
+		else if (regs[ATA_REG_HCYL_OFFSET] == 0xEB &&
+			 regs[ATA_REG_LCYL_OFFSET] == 0x14) {
+			/*
+			 * It seems that the RICOH
+			 * MP6200A CD/RW drive will
+			 * report itself okay as a
+			 * slave when it is really a
+			 * master. So this check again
+			 * as a master device just to
+			 * make sure it doesn't report
+			 * itself okay as a master also
+			 */
+			if ((master_slave & ATA_ADDRESS_DEVHEAD_SLAVE) &&
+			    !recheckAsMaster) {
+				usb_stor_dbg(us, "   Identified ATAPI device as slave.  Rechecking again as master\n");
+				recheckAsMaster = 1;
+				master_slave = ATA_ADDRESS_DEVHEAD_STD;
+			} else {
+				usb_stor_dbg(us, "   Identified ATAPI device\n");
+				info->DeviceHead = master_slave;
+			      
+				status = isd200_atapi_soft_reset(us);
+				break;
+			}
+		} else {
+			usb_stor_dbg(us, "   Not ATA, not ATAPI - Weird\n");
+			break;
+		}
+
+		/* check for timeout on this request */
+		if (time_after_eq(jiffies, endTime)) {
+			if (!detect)
+				usb_stor_dbg(us, "   BSY check timeout, just continue with next operation...\n");
+			else
+				usb_stor_dbg(us, "   Device detect timeout!\n");
+			break;
+		}
+	}
+
+	return status;
+}
+
+/**************************************************************************
+ * isd200_manual_enum
+ *									 
+ * Determines if the drive attached is an ATA or ATAPI and if it is a
+ * master or slave.
+ *
+ * RETURNS:
+ *    ISD status code
+ */
+static int isd200_manual_enum(struct us_data *us)
+{
+	struct isd200_info *info = (struct isd200_info *)us->extra;
+	int retStatus = ISD200_GOOD;
+
+	usb_stor_dbg(us, "Entering isd200_manual_enum\n");
+
+	retStatus = isd200_read_config(us);
+	if (retStatus == ISD200_GOOD) {
+		int isslave;
+		/* master or slave? */
+		retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_STD, 0);
+		if (retStatus == ISD200_GOOD)
+			retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_SLAVE, 0);
+
+		if (retStatus == ISD200_GOOD) {
+			retStatus = isd200_srst(us);
+			if (retStatus == ISD200_GOOD)
+				/* ata or atapi? */
+				retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_STD, 1);
+		}
+
+		isslave = (info->DeviceHead & ATA_ADDRESS_DEVHEAD_SLAVE) ? 1 : 0;
+		if (!(info->ConfigData.ATAConfig & ATACFG_MASTER)) {
+			usb_stor_dbg(us, "   Setting Master/Slave selection to %d\n",
+				     isslave);
+			info->ConfigData.ATAConfig &= 0x3f;
+			info->ConfigData.ATAConfig |= (isslave<<6);
+			retStatus = isd200_write_config(us);
+		}
+	}
+
+	usb_stor_dbg(us, "Leaving isd200_manual_enum %08X\n", retStatus);
+	return(retStatus);
+}
+
+static void isd200_fix_driveid(u16 *id)
+{
+#ifndef __LITTLE_ENDIAN
+# ifdef __BIG_ENDIAN
+	int i;
+
+	for (i = 0; i < ATA_ID_WORDS; i++)
+		id[i] = __le16_to_cpu(id[i]);
+# else
+#  error "Please fix <asm/byteorder.h>"
+# endif
+#endif
+}
+
+static void isd200_dump_driveid(struct us_data *us, u16 *id)
+{
+	usb_stor_dbg(us, "   Identify Data Structure:\n");
+	usb_stor_dbg(us, "      config = 0x%x\n",	id[ATA_ID_CONFIG]);
+	usb_stor_dbg(us, "      cyls = 0x%x\n",		id[ATA_ID_CYLS]);
+	usb_stor_dbg(us, "      heads = 0x%x\n",	id[ATA_ID_HEADS]);
+	usb_stor_dbg(us, "      track_bytes = 0x%x\n",	id[4]);
+	usb_stor_dbg(us, "      sector_bytes = 0x%x\n", id[5]);
+	usb_stor_dbg(us, "      sectors = 0x%x\n",	id[ATA_ID_SECTORS]);
+	usb_stor_dbg(us, "      serial_no[0] = 0x%x\n", *(char *)&id[ATA_ID_SERNO]);
+	usb_stor_dbg(us, "      buf_type = 0x%x\n",	id[20]);
+	usb_stor_dbg(us, "      buf_size = 0x%x\n",	id[ATA_ID_BUF_SIZE]);
+	usb_stor_dbg(us, "      ecc_bytes = 0x%x\n",	id[22]);
+	usb_stor_dbg(us, "      fw_rev[0] = 0x%x\n",	*(char *)&id[ATA_ID_FW_REV]);
+	usb_stor_dbg(us, "      model[0] = 0x%x\n",	*(char *)&id[ATA_ID_PROD]);
+	usb_stor_dbg(us, "      max_multsect = 0x%x\n", id[ATA_ID_MAX_MULTSECT] & 0xff);
+	usb_stor_dbg(us, "      dword_io = 0x%x\n",	id[ATA_ID_DWORD_IO]);
+	usb_stor_dbg(us, "      capability = 0x%x\n",	id[ATA_ID_CAPABILITY] >> 8);
+	usb_stor_dbg(us, "      tPIO = 0x%x\n",	  id[ATA_ID_OLD_PIO_MODES] >> 8);
+	usb_stor_dbg(us, "      tDMA = 0x%x\n",	  id[ATA_ID_OLD_DMA_MODES] >> 8);
+	usb_stor_dbg(us, "      field_valid = 0x%x\n",	id[ATA_ID_FIELD_VALID]);
+	usb_stor_dbg(us, "      cur_cyls = 0x%x\n",	id[ATA_ID_CUR_CYLS]);
+	usb_stor_dbg(us, "      cur_heads = 0x%x\n",	id[ATA_ID_CUR_HEADS]);
+	usb_stor_dbg(us, "      cur_sectors = 0x%x\n",	id[ATA_ID_CUR_SECTORS]);
+	usb_stor_dbg(us, "      cur_capacity = 0x%x\n", ata_id_u32(id, 57));
+	usb_stor_dbg(us, "      multsect = 0x%x\n",	id[ATA_ID_MULTSECT] & 0xff);
+	usb_stor_dbg(us, "      lba_capacity = 0x%x\n", ata_id_u32(id, ATA_ID_LBA_CAPACITY));
+	usb_stor_dbg(us, "      command_set_1 = 0x%x\n", id[ATA_ID_COMMAND_SET_1]);
+	usb_stor_dbg(us, "      command_set_2 = 0x%x\n", id[ATA_ID_COMMAND_SET_2]);
+}
+
+/**************************************************************************
+ * isd200_get_inquiry_data
+ *
+ * Get inquiry data
+ *
+ * RETURNS:
+ *    ISD status code
+ */
+static int isd200_get_inquiry_data( struct us_data *us )
+{
+	struct isd200_info *info = (struct isd200_info *)us->extra;
+	int retStatus = ISD200_GOOD;
+	u16 *id = info->id;
+
+	usb_stor_dbg(us, "Entering isd200_get_inquiry_data\n");
+
+	/* set default to Master */
+	info->DeviceHead = ATA_ADDRESS_DEVHEAD_STD;
+
+	/* attempt to manually enumerate this device */
+	retStatus = isd200_manual_enum(us);
+	if (retStatus == ISD200_GOOD) {
+		int transferStatus;
+
+		/* check for an ATA device */
+		if (info->DeviceFlags & DF_ATA_DEVICE) {
+			/* this must be an ATA device */
+			/* perform an ATA Command Identify */
+			transferStatus = isd200_action( us, ACTION_IDENTIFY,
+							id, ATA_ID_WORDS * 2);
+			if (transferStatus != ISD200_TRANSPORT_GOOD) {
+				/* Error issuing ATA Command Identify */
+				usb_stor_dbg(us, "   Error issuing ATA Command Identify\n");
+				retStatus = ISD200_ERROR;
+			} else {
+				/* ATA Command Identify successful */
+				int i;
+				__be16 *src;
+				__u16 *dest;
+
+				isd200_fix_driveid(id);
+				isd200_dump_driveid(us, id);
+
+				memset(&info->InquiryData, 0, sizeof(info->InquiryData));
+
+				/* Standard IDE interface only supports disks */
+				info->InquiryData.DeviceType = DIRECT_ACCESS_DEVICE;
+
+				/* The length must be at least 36 (5 + 31) */
+				info->InquiryData.AdditionalLength = 0x1F;
+
+				if (id[ATA_ID_COMMAND_SET_1] & COMMANDSET_MEDIA_STATUS) {
+					/* set the removable bit */
+					info->InquiryData.DeviceTypeModifier = DEVICE_REMOVABLE;
+					info->DeviceFlags |= DF_REMOVABLE_MEDIA;
+				}
+
+				/* Fill in vendor identification fields */
+				src = (__be16 *)&id[ATA_ID_PROD];
+				dest = (__u16*)info->InquiryData.VendorId;
+				for (i = 0; i < 4; i++)
+					dest[i] = be16_to_cpu(src[i]);
+
+				src = (__be16 *)&id[ATA_ID_PROD + 8/2];
+				dest = (__u16*)info->InquiryData.ProductId;
+				for (i=0;i<8;i++)
+					dest[i] = be16_to_cpu(src[i]);
+
+				src = (__be16 *)&id[ATA_ID_FW_REV];
+				dest = (__u16*)info->InquiryData.ProductRevisionLevel;
+				for (i=0;i<2;i++)
+					dest[i] = be16_to_cpu(src[i]);
+
+				/* determine if it supports Media Status Notification */
+				if (id[ATA_ID_COMMAND_SET_2] & COMMANDSET_MEDIA_STATUS) {
+					usb_stor_dbg(us, "   Device supports Media Status Notification\n");
+
+					/*
+					 * Indicate that it is enabled, even
+					 * though it is not.
+					 * This allows the lock/unlock of the
+					 * media to work correctly.
+					 */
+					info->DeviceFlags |= DF_MEDIA_STATUS_ENABLED;
+				}
+				else
+					info->DeviceFlags &= ~DF_MEDIA_STATUS_ENABLED;
+
+			}
+		} else {
+			/* 
+			 * this must be an ATAPI device 
+			 * use an ATAPI protocol (Transparent SCSI)
+			 */
+			us->protocol_name = "Transparent SCSI";
+			us->proto_handler = usb_stor_transparent_scsi_command;
+
+			usb_stor_dbg(us, "Protocol changed to: %s\n",
+				     us->protocol_name);
+	    
+			/* Free driver structure */
+			us->extra_destructor(info);
+			kfree(info);
+			us->extra = NULL;
+			us->extra_destructor = NULL;
+		}
+	}
+
+	usb_stor_dbg(us, "Leaving isd200_get_inquiry_data %08X\n", retStatus);
+
+	return(retStatus);
+}
+
+/**************************************************************************
+ * isd200_scsi_to_ata
+ *									 
+ * Translate SCSI commands to ATA commands.
+ *
+ * RETURNS:
+ *    1 if the command needs to be sent to the transport layer
+ *    0 otherwise
+ */
+static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us,
+			      union ata_cdb * ataCdb)
+{
+	struct isd200_info *info = (struct isd200_info *)us->extra;
+	u16 *id = info->id;
+	int sendToTransport = 1;
+	unsigned char sectnum, head;
+	unsigned short cylinder;
+	unsigned long lba;
+	unsigned long blockCount;
+	unsigned char senseData[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+
+	memset(ataCdb, 0, sizeof(union ata_cdb));
+
+	/* SCSI Command */
+	switch (srb->cmnd[0]) {
+	case INQUIRY:
+		usb_stor_dbg(us, "   ATA OUT - INQUIRY\n");
+
+		/* copy InquiryData */
+		usb_stor_set_xfer_buf((unsigned char *) &info->InquiryData,
+				sizeof(info->InquiryData), srb);
+		srb->result = SAM_STAT_GOOD;
+		sendToTransport = 0;
+		break;
+
+	case MODE_SENSE:
+		usb_stor_dbg(us, "   ATA OUT - SCSIOP_MODE_SENSE\n");
+
+		/* Initialize the return buffer */
+		usb_stor_set_xfer_buf(senseData, sizeof(senseData), srb);
+
+		if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED)
+		{
+			ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
+			ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
+			ataCdb->generic.TransferBlockSize = 1;
+			ataCdb->generic.RegisterSelect = REG_COMMAND;
+			ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
+			isd200_srb_set_bufflen(srb, 0);
+		} else {
+			usb_stor_dbg(us, "   Media Status not supported, just report okay\n");
+			srb->result = SAM_STAT_GOOD;
+			sendToTransport = 0;
+		}
+		break;
+
+	case TEST_UNIT_READY:
+		usb_stor_dbg(us, "   ATA OUT - SCSIOP_TEST_UNIT_READY\n");
+
+		if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED)
+		{
+			ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
+			ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
+			ataCdb->generic.TransferBlockSize = 1;
+			ataCdb->generic.RegisterSelect = REG_COMMAND;
+			ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
+			isd200_srb_set_bufflen(srb, 0);
+		} else {
+			usb_stor_dbg(us, "   Media Status not supported, just report okay\n");
+			srb->result = SAM_STAT_GOOD;
+			sendToTransport = 0;
+		}
+		break;
+
+	case READ_CAPACITY:
+	{
+		unsigned long capacity;
+		struct read_capacity_data readCapacityData;
+
+		usb_stor_dbg(us, "   ATA OUT - SCSIOP_READ_CAPACITY\n");
+
+		if (ata_id_has_lba(id))
+			capacity = ata_id_u32(id, ATA_ID_LBA_CAPACITY) - 1;
+		else
+			capacity = (id[ATA_ID_HEADS] * id[ATA_ID_CYLS] *
+				    id[ATA_ID_SECTORS]) - 1;
+
+		readCapacityData.LogicalBlockAddress = cpu_to_be32(capacity);
+		readCapacityData.BytesPerBlock = cpu_to_be32(0x200);
+
+		usb_stor_set_xfer_buf((unsigned char *) &readCapacityData,
+				sizeof(readCapacityData), srb);
+		srb->result = SAM_STAT_GOOD;
+		sendToTransport = 0;
+	}
+	break;
+
+	case READ_10:
+		usb_stor_dbg(us, "   ATA OUT - SCSIOP_READ\n");
+
+		lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]);
+		blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8];
+
+		if (ata_id_has_lba(id)) {
+			sectnum = (unsigned char)(lba);
+			cylinder = (unsigned short)(lba>>8);
+			head = ATA_ADDRESS_DEVHEAD_LBA_MODE | (unsigned char)(lba>>24 & 0x0F);
+		} else {
+			sectnum = (u8)((lba % id[ATA_ID_SECTORS]) + 1);
+			cylinder = (u16)(lba / (id[ATA_ID_SECTORS] *
+					id[ATA_ID_HEADS]));
+			head = (u8)((lba / id[ATA_ID_SECTORS]) %
+					id[ATA_ID_HEADS]);
+		}
+		ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
+		ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
+		ataCdb->generic.TransferBlockSize = 1;
+		ataCdb->generic.RegisterSelect =
+		  REG_SECTOR_COUNT | REG_SECTOR_NUMBER |
+		  REG_CYLINDER_LOW | REG_CYLINDER_HIGH |
+		  REG_DEVICE_HEAD  | REG_COMMAND;
+		ataCdb->write.SectorCountByte = (unsigned char)blockCount;
+		ataCdb->write.SectorNumberByte = sectnum;
+		ataCdb->write.CylinderHighByte = (unsigned char)(cylinder>>8);
+		ataCdb->write.CylinderLowByte = (unsigned char)cylinder;
+		ataCdb->write.DeviceHeadByte = (head | ATA_ADDRESS_DEVHEAD_STD);
+		ataCdb->write.CommandByte = ATA_CMD_PIO_READ;
+		break;
+
+	case WRITE_10:
+		usb_stor_dbg(us, "   ATA OUT - SCSIOP_WRITE\n");
+
+		lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]);
+		blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8];
+
+		if (ata_id_has_lba(id)) {
+			sectnum = (unsigned char)(lba);
+			cylinder = (unsigned short)(lba>>8);
+			head = ATA_ADDRESS_DEVHEAD_LBA_MODE | (unsigned char)(lba>>24 & 0x0F);
+		} else {
+			sectnum = (u8)((lba % id[ATA_ID_SECTORS]) + 1);
+			cylinder = (u16)(lba / (id[ATA_ID_SECTORS] *
+					id[ATA_ID_HEADS]));
+			head = (u8)((lba / id[ATA_ID_SECTORS]) %
+					id[ATA_ID_HEADS]);
+		}
+		ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
+		ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
+		ataCdb->generic.TransferBlockSize = 1;
+		ataCdb->generic.RegisterSelect =
+		  REG_SECTOR_COUNT | REG_SECTOR_NUMBER |
+		  REG_CYLINDER_LOW | REG_CYLINDER_HIGH |
+		  REG_DEVICE_HEAD  | REG_COMMAND;
+		ataCdb->write.SectorCountByte = (unsigned char)blockCount;
+		ataCdb->write.SectorNumberByte = sectnum;
+		ataCdb->write.CylinderHighByte = (unsigned char)(cylinder>>8);
+		ataCdb->write.CylinderLowByte = (unsigned char)cylinder;
+		ataCdb->write.DeviceHeadByte = (head | ATA_ADDRESS_DEVHEAD_STD);
+		ataCdb->write.CommandByte = ATA_CMD_PIO_WRITE;
+		break;
+
+	case ALLOW_MEDIUM_REMOVAL:
+		usb_stor_dbg(us, "   ATA OUT - SCSIOP_MEDIUM_REMOVAL\n");
+
+		if (info->DeviceFlags & DF_REMOVABLE_MEDIA) {
+			usb_stor_dbg(us, "   srb->cmnd[4] = 0x%X\n",
+				     srb->cmnd[4]);
+	    
+			ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
+			ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
+			ataCdb->generic.TransferBlockSize = 1;
+			ataCdb->generic.RegisterSelect = REG_COMMAND;
+			ataCdb->write.CommandByte = (srb->cmnd[4] & 0x1) ?
+				ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
+			isd200_srb_set_bufflen(srb, 0);
+		} else {
+			usb_stor_dbg(us, "   Not removable media, just report okay\n");
+			srb->result = SAM_STAT_GOOD;
+			sendToTransport = 0;
+		}
+		break;
+
+	case START_STOP:    
+		usb_stor_dbg(us, "   ATA OUT - SCSIOP_START_STOP_UNIT\n");
+		usb_stor_dbg(us, "   srb->cmnd[4] = 0x%X\n", srb->cmnd[4]);
+
+		if ((srb->cmnd[4] & 0x3) == 0x2) {
+			usb_stor_dbg(us, "   Media Eject\n");
+			ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
+			ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
+			ataCdb->generic.TransferBlockSize = 0;
+			ataCdb->generic.RegisterSelect = REG_COMMAND;
+			ataCdb->write.CommandByte = ATA_COMMAND_MEDIA_EJECT;
+		} else if ((srb->cmnd[4] & 0x3) == 0x1) {
+			usb_stor_dbg(us, "   Get Media Status\n");
+			ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
+			ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
+			ataCdb->generic.TransferBlockSize = 1;
+			ataCdb->generic.RegisterSelect = REG_COMMAND;
+			ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
+			isd200_srb_set_bufflen(srb, 0);
+		} else {
+			usb_stor_dbg(us, "   Nothing to do, just report okay\n");
+			srb->result = SAM_STAT_GOOD;
+			sendToTransport = 0;
+		}
+		break;
+
+	default:
+		usb_stor_dbg(us, "Unsupported SCSI command - 0x%X\n",
+			     srb->cmnd[0]);
+		srb->result = DID_ERROR << 16;
+		sendToTransport = 0;
+		break;
+	}
+
+	return(sendToTransport);
+}
+
+
+/**************************************************************************
+ * isd200_free_info
+ *
+ * Frees the driver structure.
+ */
+static void isd200_free_info_ptrs(void *info_)
+{
+	struct isd200_info *info = (struct isd200_info *) info_;
+
+	if (info) {
+		kfree(info->id);
+		kfree(info->RegsBuf);
+		kfree(info->srb.sense_buffer);
+	}
+}
+
+/**************************************************************************
+ * isd200_init_info
+ *									 
+ * Allocates (if necessary) and initializes the driver structure.
+ *
+ * RETURNS:
+ *    error status code
+ */
+static int isd200_init_info(struct us_data *us)
+{
+	struct isd200_info *info;
+
+	info = kzalloc(sizeof(struct isd200_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->id = kzalloc(ATA_ID_WORDS * 2, GFP_KERNEL);
+	info->RegsBuf = kmalloc(sizeof(info->ATARegs), GFP_KERNEL);
+	info->srb.sense_buffer = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
+
+	if (!info->id || !info->RegsBuf || !info->srb.sense_buffer) {
+		isd200_free_info_ptrs(info);
+		kfree(info);
+		return -ENOMEM;
+	}
+
+	us->extra = info;
+	us->extra_destructor = isd200_free_info_ptrs;
+
+	return 0;
+}
+
+/**************************************************************************
+ * Initialization for the ISD200 
+ */
+
+static int isd200_Initialization(struct us_data *us)
+{
+	usb_stor_dbg(us, "ISD200 Initialization...\n");
+
+	/* Initialize ISD200 info struct */
+
+	if (isd200_init_info(us) == ISD200_ERROR) {
+		usb_stor_dbg(us, "ERROR Initializing ISD200 Info struct\n");
+	} else {
+		/* Get device specific data */
+
+		if (isd200_get_inquiry_data(us) != ISD200_GOOD)
+			usb_stor_dbg(us, "ISD200 Initialization Failure\n");
+		else
+			usb_stor_dbg(us, "ISD200 Initialization complete\n");
+	}
+
+	return 0;
+}
+
+
+/**************************************************************************
+ * Protocol and Transport for the ISD200 ASIC
+ *
+ * This protocol and transport are for ATA devices connected to an ISD200
+ * ASIC.  An ATAPI device that is connected as a slave device will be
+ * detected in the driver initialization function and the protocol will
+ * be changed to an ATAPI protocol (Transparent SCSI).
+ *
+ */
+
+static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
+{
+	int sendToTransport, orig_bufflen;
+	union ata_cdb ataCdb;
+
+	/* Make sure driver was initialized */
+
+	if (us->extra == NULL) {
+		usb_stor_dbg(us, "ERROR Driver not initialized\n");
+		srb->result = DID_ERROR << 16;
+		return;
+	}
+
+	scsi_set_resid(srb, 0);
+	/* scsi_bufflen might change in protocol translation to ata */
+	orig_bufflen = scsi_bufflen(srb);
+	sendToTransport = isd200_scsi_to_ata(srb, us, &ataCdb);
+
+	/* send the command to the transport layer */
+	if (sendToTransport)
+		isd200_invoke_transport(us, srb, &ataCdb);
+
+	isd200_srb_set_bufflen(srb, orig_bufflen);
+}
+
+static struct scsi_host_template isd200_host_template;
+
+static int isd200_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - isd200_usb_ids) + isd200_unusual_dev_list,
+			&isd200_host_template);
+	if (result)
+		return result;
+
+	us->protocol_name = "ISD200 ATA/ATAPI";
+	us->proto_handler = isd200_ata_command;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver isd200_driver = {
+	.name =		DRV_NAME,
+	.probe =	isd200_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	isd200_usb_ids,
+	.soft_unbind =	1,
+	.no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(isd200_driver, isd200_host_template, DRV_NAME);
diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c
new file mode 100644
index 000000000..229bf0c1a
--- /dev/null
+++ b/drivers/usb/storage/jumpshot.c
@@ -0,0 +1,683 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Lexar "Jumpshot" Compact Flash reader
+ *
+ * jumpshot driver v0.1:
+ *
+ * First release
+ *
+ * Current development and maintenance by:
+ *   (c) 2000 Jimmie Mayfield (mayfield+usb@sackheads.org)
+ *
+ *   Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver
+ *   which I used as a template for this driver.
+ *
+ *   Some bugfixes and scatter-gather code by Gregory P. Smith 
+ *   (greg-usb@electricrain.com)
+ *
+ *   Fix for media change by Joerg Schneider (js@joergschneider.com)
+ *
+ * Developed with the assistance of:
+ *
+ *   (C) 2002 Alan Stern <stern@rowland.org>
+ */
+ 
+ /*
+  * This driver attempts to support the Lexar Jumpshot USB CompactFlash 
+  * reader.  Like many other USB CompactFlash readers, the Jumpshot contains
+  * a USB-to-ATA chip. 
+  *
+  * This driver supports reading and writing.  If you're truly paranoid,
+  * however, you can force the driver into a write-protected state by setting
+  * the WP enable bits in jumpshot_handle_mode_sense.  See the comments
+  * in that routine.
+  */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "scsiglue.h"
+
+#define DRV_NAME "ums-jumpshot"
+
+MODULE_DESCRIPTION("Driver for Lexar \"Jumpshot\" Compact Flash reader");
+MODULE_AUTHOR("Jimmie Mayfield <mayfield+usb@sackheads.org>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(USB_STORAGE);
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+static struct usb_device_id jumpshot_usb_ids[] = {
+#	include "unusual_jumpshot.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, jumpshot_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev jumpshot_unusual_dev_list[] = {
+#	include "unusual_jumpshot.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+struct jumpshot_info {
+   unsigned long   sectors;     /* total sector count */
+   unsigned long   ssize;       /* sector size in bytes */
+
+   /* the following aren't used yet */
+   unsigned char   sense_key;
+   unsigned long   sense_asc;   /* additional sense code */
+   unsigned long   sense_ascq;  /* additional sense code qualifier */
+};
+
+static inline int jumpshot_bulk_read(struct us_data *us,
+				     unsigned char *data, 
+				     unsigned int len)
+{
+	if (len == 0)
+		return USB_STOR_XFER_GOOD;
+
+	usb_stor_dbg(us, "len = %d\n", len);
+	return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+			data, len, NULL);
+}
+
+
+static inline int jumpshot_bulk_write(struct us_data *us,
+				      unsigned char *data, 
+				      unsigned int len)
+{
+	if (len == 0)
+		return USB_STOR_XFER_GOOD;
+
+	usb_stor_dbg(us, "len = %d\n", len);
+	return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+			data, len, NULL);
+}
+
+
+static int jumpshot_get_status(struct us_data  *us)
+{
+	int rc;
+
+	if (!us)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	// send the setup
+	rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
+				   0, 0xA0, 0, 7, us->iobuf, 1);
+
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	if (us->iobuf[0] != 0x50) {
+		usb_stor_dbg(us, "0x%2x\n", us->iobuf[0]);
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int jumpshot_read_data(struct us_data *us,
+			      struct jumpshot_info *info,
+			      u32 sector,
+			      u32 sectors)
+{
+	unsigned char *command = us->iobuf;
+	unsigned char *buffer;
+	unsigned char  thistime;
+	unsigned int totallen, alloclen;
+	int len, result;
+	unsigned int sg_offset = 0;
+	struct scatterlist *sg = NULL;
+
+	// we're working in LBA mode.  according to the ATA spec, 
+	// we can support up to 28-bit addressing.  I don't know if Jumpshot
+	// supports beyond 24-bit addressing.  It's kind of hard to test 
+	// since it requires > 8GB CF card.
+
+	if (sector > 0x0FFFFFFF)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	totallen = sectors * info->ssize;
+
+	// Since we don't read more than 64 KB at a time, we have to create
+	// a bounce buffer and move the data a piece at a time between the
+	// bounce buffer and the actual transfer buffer.
+
+	alloclen = min(totallen, 65536u);
+	buffer = kmalloc(alloclen, GFP_NOIO);
+	if (buffer == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	do {
+		// loop, never allocate or transfer more than 64k at once
+		// (min(128k, 255*info->ssize) is the real limit)
+		len = min(totallen, alloclen);
+		thistime = (len / info->ssize) & 0xff;
+
+		command[0] = 0;
+		command[1] = thistime;
+		command[2] = sector & 0xFF;
+		command[3] = (sector >>  8) & 0xFF;
+		command[4] = (sector >> 16) & 0xFF;
+
+		command[5] = 0xE0 | ((sector >> 24) & 0x0F);
+		command[6] = 0x20;
+
+		// send the setup + command
+		result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+					       0, 0x20, 0, 1, command, 7);
+		if (result != USB_STOR_XFER_GOOD)
+			goto leave;
+
+		// read the result
+		result = jumpshot_bulk_read(us, buffer, len);
+		if (result != USB_STOR_XFER_GOOD)
+			goto leave;
+
+		usb_stor_dbg(us, "%d bytes\n", len);
+
+		// Store the data in the transfer buffer
+		usb_stor_access_xfer_buf(buffer, len, us->srb,
+				 &sg, &sg_offset, TO_XFER_BUF);
+
+		sector += thistime;
+		totallen -= len;
+	} while (totallen > 0);
+
+	kfree(buffer);
+	return USB_STOR_TRANSPORT_GOOD;
+
+ leave:
+	kfree(buffer);
+	return USB_STOR_TRANSPORT_ERROR;
+}
+
+
+static int jumpshot_write_data(struct us_data *us,
+			       struct jumpshot_info *info,
+			       u32 sector,
+			       u32 sectors)
+{
+	unsigned char *command = us->iobuf;
+	unsigned char *buffer;
+	unsigned char  thistime;
+	unsigned int totallen, alloclen;
+	int len, result, waitcount;
+	unsigned int sg_offset = 0;
+	struct scatterlist *sg = NULL;
+
+	// we're working in LBA mode.  according to the ATA spec, 
+	// we can support up to 28-bit addressing.  I don't know if Jumpshot
+	// supports beyond 24-bit addressing.  It's kind of hard to test 
+	// since it requires > 8GB CF card.
+	//
+	if (sector > 0x0FFFFFFF)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	totallen = sectors * info->ssize;
+
+	// Since we don't write more than 64 KB at a time, we have to create
+	// a bounce buffer and move the data a piece at a time between the
+	// bounce buffer and the actual transfer buffer.
+
+	alloclen = min(totallen, 65536u);
+	buffer = kmalloc(alloclen, GFP_NOIO);
+	if (buffer == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	do {
+		// loop, never allocate or transfer more than 64k at once
+		// (min(128k, 255*info->ssize) is the real limit)
+
+		len = min(totallen, alloclen);
+		thistime = (len / info->ssize) & 0xff;
+
+		// Get the data from the transfer buffer
+		usb_stor_access_xfer_buf(buffer, len, us->srb,
+				&sg, &sg_offset, FROM_XFER_BUF);
+
+		command[0] = 0;
+		command[1] = thistime;
+		command[2] = sector & 0xFF;
+		command[3] = (sector >>  8) & 0xFF;
+		command[4] = (sector >> 16) & 0xFF;
+
+		command[5] = 0xE0 | ((sector >> 24) & 0x0F);
+		command[6] = 0x30;
+
+		// send the setup + command
+		result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+			0, 0x20, 0, 1, command, 7);
+		if (result != USB_STOR_XFER_GOOD)
+			goto leave;
+
+		// send the data
+		result = jumpshot_bulk_write(us, buffer, len);
+		if (result != USB_STOR_XFER_GOOD)
+			goto leave;
+
+		// read the result.  apparently the bulk write can complete
+		// before the jumpshot drive is finished writing.  so we loop
+		// here until we get a good return code
+		waitcount = 0;
+		do {
+			result = jumpshot_get_status(us);
+			if (result != USB_STOR_TRANSPORT_GOOD) {
+				// I have not experimented to find the smallest value.
+				//
+				msleep(50); 
+			}
+		} while ((result != USB_STOR_TRANSPORT_GOOD) && (waitcount < 10));
+
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			usb_stor_dbg(us, "Gah!  Waitcount = 10.  Bad write!?\n");
+
+		sector += thistime;
+		totallen -= len;
+	} while (totallen > 0);
+
+	kfree(buffer);
+	return result;
+
+ leave:
+	kfree(buffer);
+	return USB_STOR_TRANSPORT_ERROR;
+}
+
+static int jumpshot_id_device(struct us_data *us,
+			      struct jumpshot_info *info)
+{
+	unsigned char *command = us->iobuf;
+	unsigned char *reply;
+	int 	 rc;
+
+	if (!info)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	command[0] = 0xE0;
+	command[1] = 0xEC;
+	reply = kmalloc(512, GFP_NOIO);
+	if (!reply)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	// send the setup
+	rc = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+				   0, 0x20, 0, 6, command, 2);
+
+	if (rc != USB_STOR_XFER_GOOD) {
+		usb_stor_dbg(us, "Gah! send_control for read_capacity failed\n");
+		rc = USB_STOR_TRANSPORT_ERROR;
+		goto leave;
+	}
+
+	// read the reply
+	rc = jumpshot_bulk_read(us, reply, 512);
+	if (rc != USB_STOR_XFER_GOOD) {
+		rc = USB_STOR_TRANSPORT_ERROR;
+		goto leave;
+	}
+
+	info->sectors = ((u32)(reply[117]) << 24) |
+			((u32)(reply[116]) << 16) |
+			((u32)(reply[115]) <<  8) |
+			((u32)(reply[114])      );
+
+	rc = USB_STOR_TRANSPORT_GOOD;
+
+ leave:
+	kfree(reply);
+	return rc;
+}
+
+static int jumpshot_handle_mode_sense(struct us_data *us,
+				      struct scsi_cmnd * srb, 
+				      int sense_6)
+{
+	static unsigned char rw_err_page[12] = {
+		0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0
+	};
+	static unsigned char cache_page[12] = {
+		0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0
+	};
+	static unsigned char rbac_page[12] = {
+		0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0
+	};
+	static unsigned char timer_page[8] = {
+		0x1C, 0x6, 0, 0, 0, 0
+	};
+	unsigned char pc, page_code;
+	unsigned int i = 0;
+	struct jumpshot_info *info = (struct jumpshot_info *) (us->extra);
+	unsigned char *ptr = us->iobuf;
+
+	pc = srb->cmnd[2] >> 6;
+	page_code = srb->cmnd[2] & 0x3F;
+
+	switch (pc) {
+	   case 0x0:
+		   usb_stor_dbg(us, "Current values\n");
+		   break;
+	   case 0x1:
+		   usb_stor_dbg(us, "Changeable values\n");
+		   break;
+	   case 0x2:
+		   usb_stor_dbg(us, "Default values\n");
+		   break;
+	   case 0x3:
+		   usb_stor_dbg(us, "Saves values\n");
+		   break;
+	}
+
+	memset(ptr, 0, 8);
+	if (sense_6) {
+		ptr[2] = 0x00;		// WP enable: 0x80
+		i = 4;
+	} else {
+		ptr[3] = 0x00;		// WP enable: 0x80
+		i = 8;
+	}
+
+	switch (page_code) {
+	   case 0x0:
+		// vendor-specific mode
+		info->sense_key = 0x05;
+		info->sense_asc = 0x24;
+		info->sense_ascq = 0x00;
+		return USB_STOR_TRANSPORT_FAILED;
+
+	   case 0x1:
+		memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
+		i += sizeof(rw_err_page);
+		break;
+
+	   case 0x8:
+		memcpy(ptr + i, cache_page, sizeof(cache_page));
+		i += sizeof(cache_page);
+		break;
+
+	   case 0x1B:
+		memcpy(ptr + i, rbac_page, sizeof(rbac_page));
+		i += sizeof(rbac_page);
+		break;
+
+	   case 0x1C:
+		memcpy(ptr + i, timer_page, sizeof(timer_page));
+		i += sizeof(timer_page);
+		break;
+
+	   case 0x3F:
+		memcpy(ptr + i, timer_page, sizeof(timer_page));
+		i += sizeof(timer_page);
+		memcpy(ptr + i, rbac_page, sizeof(rbac_page));
+		i += sizeof(rbac_page);
+		memcpy(ptr + i, cache_page, sizeof(cache_page));
+		i += sizeof(cache_page);
+		memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
+		i += sizeof(rw_err_page);
+		break;
+	}
+
+	if (sense_6)
+		ptr[0] = i - 1;
+	else
+		((__be16 *) ptr)[0] = cpu_to_be16(i - 2);
+	usb_stor_set_xfer_buf(ptr, i, srb);
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+
+static void jumpshot_info_destructor(void *extra)
+{
+	// this routine is a placeholder...
+	// currently, we don't allocate any extra blocks so we're okay
+}
+
+
+
+// Transport for the Lexar 'Jumpshot'
+//
+static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	struct jumpshot_info *info;
+	int rc;
+	unsigned long block, blocks;
+	unsigned char *ptr = us->iobuf;
+	static unsigned char inquiry_response[8] = {
+		0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
+	};
+
+	if (!us->extra) {
+		us->extra = kzalloc(sizeof(struct jumpshot_info), GFP_NOIO);
+		if (!us->extra)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		us->extra_destructor = jumpshot_info_destructor;
+	}
+
+	info = (struct jumpshot_info *) (us->extra);
+
+	if (srb->cmnd[0] == INQUIRY) {
+		usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
+		memcpy(ptr, inquiry_response, sizeof(inquiry_response));
+		fill_inquiry_response(us, ptr, 36);
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == READ_CAPACITY) {
+		info->ssize = 0x200;  // hard coded 512 byte sectors as per ATA spec
+
+		rc = jumpshot_get_status(us);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+
+		rc = jumpshot_id_device(us, info);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+
+		usb_stor_dbg(us, "READ_CAPACITY:  %ld sectors, %ld bytes per sector\n",
+			     info->sectors, info->ssize);
+
+		// build the reply
+		//
+		((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
+		((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
+		usb_stor_set_xfer_buf(ptr, 8, srb);
+
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == MODE_SELECT_10) {
+		usb_stor_dbg(us, "Gah! MODE_SELECT_10\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	if (srb->cmnd[0] == READ_10) {
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+			((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+		usb_stor_dbg(us, "READ_10: read block 0x%04lx  count %ld\n",
+			     block, blocks);
+		return jumpshot_read_data(us, info, block, blocks);
+	}
+
+	if (srb->cmnd[0] == READ_12) {
+		// I don't think we'll ever see a READ_12 but support it anyway...
+		//
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+			((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+			 ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));
+
+		usb_stor_dbg(us, "READ_12: read block 0x%04lx  count %ld\n",
+			     block, blocks);
+		return jumpshot_read_data(us, info, block, blocks);
+	}
+
+	if (srb->cmnd[0] == WRITE_10) {
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+			((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+		usb_stor_dbg(us, "WRITE_10: write block 0x%04lx  count %ld\n",
+			     block, blocks);
+		return jumpshot_write_data(us, info, block, blocks);
+	}
+
+	if (srb->cmnd[0] == WRITE_12) {
+		// I don't think we'll ever see a WRITE_12 but support it anyway...
+		//
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+			((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+			 ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));
+
+		usb_stor_dbg(us, "WRITE_12: write block 0x%04lx  count %ld\n",
+			     block, blocks);
+		return jumpshot_write_data(us, info, block, blocks);
+	}
+
+
+	if (srb->cmnd[0] == TEST_UNIT_READY) {
+		usb_stor_dbg(us, "TEST_UNIT_READY\n");
+		return jumpshot_get_status(us);
+	}
+
+	if (srb->cmnd[0] == REQUEST_SENSE) {
+		usb_stor_dbg(us, "REQUEST_SENSE\n");
+
+		memset(ptr, 0, 18);
+		ptr[0] = 0xF0;
+		ptr[2] = info->sense_key;
+		ptr[7] = 11;
+		ptr[12] = info->sense_asc;
+		ptr[13] = info->sense_ascq;
+		usb_stor_set_xfer_buf(ptr, 18, srb);
+
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == MODE_SENSE) {
+		usb_stor_dbg(us, "MODE_SENSE_6 detected\n");
+		return jumpshot_handle_mode_sense(us, srb, 1);
+	}
+
+	if (srb->cmnd[0] == MODE_SENSE_10) {
+		usb_stor_dbg(us, "MODE_SENSE_10 detected\n");
+		return jumpshot_handle_mode_sense(us, srb, 0);
+	}
+
+	if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+		/*
+		 * sure.  whatever.  not like we can stop the user from popping
+		 * the media out of the device (no locking doors, etc)
+		 */
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == START_STOP) {
+		/*
+		 * this is used by sd.c'check_scsidisk_media_change to detect
+		 * media change
+		 */
+		usb_stor_dbg(us, "START_STOP\n");
+		/*
+		 * the first jumpshot_id_device after a media change returns
+		 * an error (determined experimentally)
+		 */
+		rc = jumpshot_id_device(us, info);
+		if (rc == USB_STOR_TRANSPORT_GOOD) {
+			info->sense_key = NO_SENSE;
+			srb->result = SUCCESS;
+		} else {
+			info->sense_key = UNIT_ATTENTION;
+			srb->result = SAM_STAT_CHECK_CONDITION;
+		}
+		return rc;
+	}
+
+	usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
+		     srb->cmnd[0], srb->cmnd[0]);
+	info->sense_key = 0x05;
+	info->sense_asc = 0x20;
+	info->sense_ascq = 0x00;
+	return USB_STOR_TRANSPORT_FAILED;
+}
+
+static struct scsi_host_template jumpshot_host_template;
+
+static int jumpshot_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - jumpshot_usb_ids) + jumpshot_unusual_dev_list,
+			&jumpshot_host_template);
+	if (result)
+		return result;
+
+	us->transport_name  = "Lexar Jumpshot Control/Bulk";
+	us->transport = jumpshot_transport;
+	us->transport_reset = usb_stor_Bulk_reset;
+	us->max_lun = 1;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver jumpshot_driver = {
+	.name =		DRV_NAME,
+	.probe =	jumpshot_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	jumpshot_usb_ids,
+	.soft_unbind =	1,
+	.no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(jumpshot_driver, jumpshot_host_template, DRV_NAME);
diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c
new file mode 100644
index 000000000..38ddfedef
--- /dev/null
+++ b/drivers/usb/storage/karma.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Rio Karma
+ *
+ *   (c) 2006 Bob Copeland <me@bobcopeland.com>
+ *   (c) 2006 Keith Bennett <keith@mcs.st-and.ac.uk>
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "debug.h"
+#include "scsiglue.h"
+
+#define DRV_NAME "ums-karma"
+
+MODULE_DESCRIPTION("Driver for Rio Karma");
+MODULE_AUTHOR("Bob Copeland <me@bobcopeland.com>, Keith Bennett <keith@mcs.st-and.ac.uk>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(USB_STORAGE);
+
+#define RIO_PREFIX "RIOP\x00"
+#define RIO_PREFIX_LEN 5
+#define RIO_SEND_LEN 40
+#define RIO_RECV_LEN 0x200
+
+#define RIO_ENTER_STORAGE 0x1
+#define RIO_LEAVE_STORAGE 0x2
+#define RIO_RESET 0xC
+
+struct karma_data {
+	int in_storage;
+	char *recv;
+};
+
+static int rio_karma_init(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+static struct usb_device_id karma_usb_ids[] = {
+#	include "unusual_karma.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, karma_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev karma_unusual_dev_list[] = {
+#	include "unusual_karma.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+/*
+ * Send commands to Rio Karma.
+ *
+ * For each command we send 40 bytes starting 'RIOP\0' followed by
+ * the command number and a sequence number, which the device will ack
+ * with a 512-byte packet with the high four bits set and everything
+ * else null.  Then we send 'RIOP\x80' followed by a zero and the
+ * sequence number, until byte 5 in the response repeats the sequence
+ * number.
+ */
+static int rio_karma_send_command(char cmd, struct us_data *us)
+{
+	int result;
+	unsigned long timeout;
+	static unsigned char seq = 1;
+	struct karma_data *data = (struct karma_data *) us->extra;
+
+	usb_stor_dbg(us, "sending command %04x\n", cmd);
+	memset(us->iobuf, 0, RIO_SEND_LEN);
+	memcpy(us->iobuf, RIO_PREFIX, RIO_PREFIX_LEN);
+	us->iobuf[5] = cmd;
+	us->iobuf[6] = seq;
+
+	timeout = jiffies + msecs_to_jiffies(6000);
+	for (;;) {
+		result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+			us->iobuf, RIO_SEND_LEN, NULL);
+		if (result != USB_STOR_XFER_GOOD)
+			goto err;
+
+		result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+			data->recv, RIO_RECV_LEN, NULL);
+		if (result != USB_STOR_XFER_GOOD)
+			goto err;
+
+		if (data->recv[5] == seq)
+			break;
+
+		if (time_after(jiffies, timeout))
+			goto err;
+
+		us->iobuf[4] = 0x80;
+		us->iobuf[5] = 0;
+		msleep(50);
+	}
+
+	seq++;
+	if (seq == 0)
+		seq = 1;
+
+	usb_stor_dbg(us, "sent command %04x\n", cmd);
+	return 0;
+err:
+	usb_stor_dbg(us, "command %04x failed\n", cmd);
+	return USB_STOR_TRANSPORT_FAILED;
+}
+
+/*
+ * Trap START_STOP and READ_10 to leave/re-enter storage mode.
+ * Everything else is propagated to the normal bulk layer.
+ */
+static int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	int ret;
+	struct karma_data *data = (struct karma_data *) us->extra;
+
+	if (srb->cmnd[0] == READ_10 && !data->in_storage) {
+		ret = rio_karma_send_command(RIO_ENTER_STORAGE, us);
+		if (ret)
+			return ret;
+
+		data->in_storage = 1;
+		return usb_stor_Bulk_transport(srb, us);
+	} else if (srb->cmnd[0] == START_STOP) {
+		ret = rio_karma_send_command(RIO_LEAVE_STORAGE, us);
+		if (ret)
+			return ret;
+
+		data->in_storage = 0;
+		return rio_karma_send_command(RIO_RESET, us);
+	}
+	return usb_stor_Bulk_transport(srb, us);
+}
+
+static void rio_karma_destructor(void *extra)
+{
+	struct karma_data *data = (struct karma_data *) extra;
+
+	kfree(data->recv);
+}
+
+static int rio_karma_init(struct us_data *us)
+{
+	struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO);
+
+	if (!data)
+		return -ENOMEM;
+
+	data->recv = kmalloc(RIO_RECV_LEN, GFP_NOIO);
+	if (!data->recv) {
+		kfree(data);
+		return -ENOMEM;
+	}
+
+	us->extra = data;
+	us->extra_destructor = rio_karma_destructor;
+	if (rio_karma_send_command(RIO_ENTER_STORAGE, us))
+		return -EIO;
+
+	data->in_storage = 1;
+
+	return 0;
+}
+
+static struct scsi_host_template karma_host_template;
+
+static int karma_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - karma_usb_ids) + karma_unusual_dev_list,
+			&karma_host_template);
+	if (result)
+		return result;
+
+	us->transport_name = "Rio Karma/Bulk";
+	us->transport = rio_karma_transport;
+	us->transport_reset = usb_stor_Bulk_reset;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver karma_driver = {
+	.name =		DRV_NAME,
+	.probe =	karma_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	karma_usb_ids,
+	.soft_unbind =	1,
+	.no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(karma_driver, karma_host_template, DRV_NAME);
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
new file mode 100644
index 000000000..01f3c2779
--- /dev/null
+++ b/drivers/usb/storage/onetouch.c
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for the Maxtor OneTouch USB hard drive's button
+ *
+ * Current development and maintenance by:
+ *	Copyright (c) 2005 Nick Sillik <n.sillik@temple.edu>
+ *
+ * Initial work by:
+ *	Copyright (c) 2003 Erik Thyren <erth7411@student.uu.se>
+ *
+ * Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann)
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include "usb.h"
+#include "debug.h"
+#include "scsiglue.h"
+
+#define DRV_NAME "ums-onetouch"
+
+MODULE_DESCRIPTION("Maxtor USB OneTouch hard drive button driver");
+MODULE_AUTHOR("Nick Sillik <n.sillik@temple.edu>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(USB_STORAGE);
+
+#define ONETOUCH_PKT_LEN        0x02
+#define ONETOUCH_BUTTON         KEY_PROG1
+
+static int onetouch_connect_input(struct us_data *ss);
+static void onetouch_release_input(void *onetouch_);
+
+struct usb_onetouch {
+	char name[128];
+	char phys[64];
+	struct input_dev *dev;	/* input device interface */
+	struct usb_device *udev;	/* usb device */
+
+	struct urb *irq;	/* urb for interrupt in report */
+	unsigned char *data;	/* input data */
+	dma_addr_t data_dma;
+	unsigned int is_open:1;
+};
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+static struct usb_device_id onetouch_usb_ids[] = {
+#	include "unusual_onetouch.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, onetouch_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev onetouch_unusual_dev_list[] = {
+#	include "unusual_onetouch.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+static void usb_onetouch_irq(struct urb *urb)
+{
+	struct usb_onetouch *onetouch = urb->context;
+	signed char *data = onetouch->data;
+	struct input_dev *dev = onetouch->dev;
+	int status = urb->status;
+	int retval;
+
+	switch (status) {
+	case 0:			/* success */
+		break;
+	case -ECONNRESET:	/* unlink */
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+	/* -EPIPE:  should clear the halt */
+	default:		/* error */
+		goto resubmit;
+	}
+
+	input_report_key(dev, ONETOUCH_BUTTON, data[0] & 0x02);
+	input_sync(dev);
+
+resubmit:
+	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&dev->dev, "can't resubmit intr, %s-%s/input0, "
+			"retval %d\n", onetouch->udev->bus->bus_name,
+			onetouch->udev->devpath, retval);
+}
+
+static int usb_onetouch_open(struct input_dev *dev)
+{
+	struct usb_onetouch *onetouch = input_get_drvdata(dev);
+
+	onetouch->is_open = 1;
+	onetouch->irq->dev = onetouch->udev;
+	if (usb_submit_urb(onetouch->irq, GFP_KERNEL)) {
+		dev_err(&dev->dev, "usb_submit_urb failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void usb_onetouch_close(struct input_dev *dev)
+{
+	struct usb_onetouch *onetouch = input_get_drvdata(dev);
+
+	usb_kill_urb(onetouch->irq);
+	onetouch->is_open = 0;
+}
+
+#ifdef CONFIG_PM
+static void usb_onetouch_pm_hook(struct us_data *us, int action)
+{
+	struct usb_onetouch *onetouch = (struct usb_onetouch *) us->extra;
+
+	if (onetouch->is_open) {
+		switch (action) {
+		case US_SUSPEND:
+			usb_kill_urb(onetouch->irq);
+			break;
+		case US_RESUME:
+			if (usb_submit_urb(onetouch->irq, GFP_NOIO) != 0)
+				dev_err(&onetouch->irq->dev->dev,
+					"usb_submit_urb failed\n");
+			break;
+		default:
+			break;
+		}
+	}
+}
+#endif /* CONFIG_PM */
+
+static int onetouch_connect_input(struct us_data *ss)
+{
+	struct usb_device *udev = ss->pusb_dev;
+	struct usb_host_interface *interface;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_onetouch *onetouch;
+	struct input_dev *input_dev;
+	int pipe, maxp;
+	int error = -ENOMEM;
+
+	interface = ss->pusb_intf->cur_altsetting;
+
+	if (interface->desc.bNumEndpoints != 3)
+		return -ENODEV;
+
+	endpoint = &interface->endpoint[2].desc;
+	if (!usb_endpoint_is_int_in(endpoint))
+		return -ENODEV;
+
+	pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
+	maxp = usb_maxpacket(udev, pipe);
+	maxp = min(maxp, ONETOUCH_PKT_LEN);
+
+	onetouch = kzalloc(sizeof(struct usb_onetouch), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!onetouch || !input_dev)
+		goto fail1;
+
+	onetouch->data = usb_alloc_coherent(udev, ONETOUCH_PKT_LEN,
+					    GFP_KERNEL, &onetouch->data_dma);
+	if (!onetouch->data)
+		goto fail1;
+
+	onetouch->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!onetouch->irq)
+		goto fail2;
+
+	onetouch->udev = udev;
+	onetouch->dev = input_dev;
+
+	if (udev->manufacturer)
+		strscpy(onetouch->name, udev->manufacturer,
+			sizeof(onetouch->name));
+	if (udev->product) {
+		if (udev->manufacturer)
+			strlcat(onetouch->name, " ", sizeof(onetouch->name));
+		strlcat(onetouch->name, udev->product, sizeof(onetouch->name));
+	}
+
+	if (!strlen(onetouch->name))
+		snprintf(onetouch->name, sizeof(onetouch->name),
+			 "Maxtor Onetouch %04x:%04x",
+			 le16_to_cpu(udev->descriptor.idVendor),
+			 le16_to_cpu(udev->descriptor.idProduct));
+
+	usb_make_path(udev, onetouch->phys, sizeof(onetouch->phys));
+	strlcat(onetouch->phys, "/input0", sizeof(onetouch->phys));
+
+	input_dev->name = onetouch->name;
+	input_dev->phys = onetouch->phys;
+	usb_to_input_id(udev, &input_dev->id);
+	input_dev->dev.parent = &udev->dev;
+
+	set_bit(EV_KEY, input_dev->evbit);
+	set_bit(ONETOUCH_BUTTON, input_dev->keybit);
+	clear_bit(0, input_dev->keybit);
+
+	input_set_drvdata(input_dev, onetouch);
+
+	input_dev->open = usb_onetouch_open;
+	input_dev->close = usb_onetouch_close;
+
+	usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data, maxp,
+			 usb_onetouch_irq, onetouch, endpoint->bInterval);
+	onetouch->irq->transfer_dma = onetouch->data_dma;
+	onetouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	ss->extra_destructor = onetouch_release_input;
+	ss->extra = onetouch;
+#ifdef CONFIG_PM
+	ss->suspend_resume_hook = usb_onetouch_pm_hook;
+#endif
+
+	error = input_register_device(onetouch->dev);
+	if (error)
+		goto fail3;
+
+	return 0;
+
+ fail3:	usb_free_urb(onetouch->irq);
+ fail2:	usb_free_coherent(udev, ONETOUCH_PKT_LEN,
+			  onetouch->data, onetouch->data_dma);
+ fail1:	kfree(onetouch);
+	input_free_device(input_dev);
+	return error;
+}
+
+static void onetouch_release_input(void *onetouch_)
+{
+	struct usb_onetouch *onetouch = (struct usb_onetouch *) onetouch_;
+
+	if (onetouch) {
+		usb_kill_urb(onetouch->irq);
+		input_unregister_device(onetouch->dev);
+		usb_free_urb(onetouch->irq);
+		usb_free_coherent(onetouch->udev, ONETOUCH_PKT_LEN,
+				  onetouch->data, onetouch->data_dma);
+	}
+}
+
+static struct scsi_host_template onetouch_host_template;
+
+static int onetouch_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - onetouch_usb_ids) + onetouch_unusual_dev_list,
+			&onetouch_host_template);
+	if (result)
+		return result;
+
+	/* Use default transport and protocol */
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver onetouch_driver = {
+	.name =		DRV_NAME,
+	.probe =	onetouch_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	onetouch_usb_ids,
+	.soft_unbind =	1,
+	.no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(onetouch_driver, onetouch_host_template, DRV_NAME);
diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c
new file mode 100644
index 000000000..7c0b05a36
--- /dev/null
+++ b/drivers/usb/storage/option_ms.c
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Option High Speed Mobile Devices.
+ *
+ *   (c) 2008 Dan Williams <dcbw@redhat.com>
+ *
+ * Inspiration taken from sierra_ms.c by Kevin Lloyd <klloyd@sierrawireless.com>
+ */
+
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "option_ms.h"
+#include "debug.h"
+
+#define ZCD_FORCE_MODEM			0x01
+#define ZCD_ALLOW_MS 			0x02
+
+static unsigned int option_zero_cd = ZCD_FORCE_MODEM;
+module_param(option_zero_cd, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(option_zero_cd, "ZeroCD mode (1=Force Modem (default),"
+		 " 2=Allow CD-Rom");
+
+#define RESPONSE_LEN 1024
+
+static int option_rezero(struct us_data *us)
+{
+	static const unsigned char rezero_msg[] = {
+	  0x55, 0x53, 0x42, 0x43, 0x78, 0x56, 0x34, 0x12,
+	  0x01, 0x00, 0x00, 0x00, 0x80, 0x00, 0x06, 0x01,
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+	};
+	char *buffer;
+	int result;
+
+	usb_stor_dbg(us, "Option MS: %s\n", "DEVICE MODE SWITCH");
+
+	buffer = kzalloc(RESPONSE_LEN, GFP_KERNEL);
+	if (buffer == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	memcpy(buffer, rezero_msg, sizeof(rezero_msg));
+	result = usb_stor_bulk_transfer_buf(us,
+			us->send_bulk_pipe,
+			buffer, sizeof(rezero_msg), NULL);
+	if (result != USB_STOR_XFER_GOOD) {
+		result = USB_STOR_XFER_ERROR;
+		goto out;
+	}
+
+	/*
+	 * Some of the devices need to be asked for a response, but we don't
+	 * care what that response is.
+	 */
+	usb_stor_bulk_transfer_buf(us,
+			us->recv_bulk_pipe,
+			buffer, RESPONSE_LEN, NULL);
+
+	/* Read the CSW */
+	usb_stor_bulk_transfer_buf(us,
+			us->recv_bulk_pipe,
+			buffer, 13, NULL);
+
+	result = USB_STOR_XFER_GOOD;
+
+out:
+	kfree(buffer);
+	return result;
+}
+
+static int option_inquiry(struct us_data *us)
+{
+	static const unsigned char inquiry_msg[] = {
+	  0x55, 0x53, 0x42, 0x43, 0x12, 0x34, 0x56, 0x78,
+	  0x24, 0x00, 0x00, 0x00, 0x80, 0x00, 0x06, 0x12,
+	  0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x00,
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+	};
+	char *buffer;
+	int result;
+
+	usb_stor_dbg(us, "Option MS: %s\n", "device inquiry for vendor name");
+
+	buffer = kzalloc(0x24, GFP_KERNEL);
+	if (buffer == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	memcpy(buffer, inquiry_msg, sizeof(inquiry_msg));
+	result = usb_stor_bulk_transfer_buf(us,
+			us->send_bulk_pipe,
+			buffer, sizeof(inquiry_msg), NULL);
+	if (result != USB_STOR_XFER_GOOD) {
+		result = USB_STOR_XFER_ERROR;
+		goto out;
+	}
+
+	result = usb_stor_bulk_transfer_buf(us,
+			us->recv_bulk_pipe,
+			buffer, 0x24, NULL);
+	if (result != USB_STOR_XFER_GOOD) {
+		result = USB_STOR_XFER_ERROR;
+		goto out;
+	}
+
+	result = memcmp(buffer+8, "Option", 6);
+
+	if (result != 0)
+		result = memcmp(buffer+8, "ZCOPTION", 8);
+
+	/* Read the CSW */
+	usb_stor_bulk_transfer_buf(us,
+			us->recv_bulk_pipe,
+			buffer, 13, NULL);
+
+out:
+	kfree(buffer);
+	return result;
+}
+
+
+int option_ms_init(struct us_data *us)
+{
+	int result;
+
+	usb_stor_dbg(us, "Option MS: %s\n", "option_ms_init called");
+
+	/*
+	 * Additional test for vendor information via INQUIRY,
+	 * because some vendor/product IDs are ambiguous
+	 */
+	result = option_inquiry(us);
+	if (result != 0) {
+		usb_stor_dbg(us, "Option MS: %s\n",
+			     "vendor is not Option or not determinable, no action taken");
+		return 0;
+	} else
+		usb_stor_dbg(us, "Option MS: %s\n",
+			     "this is a genuine Option device, proceeding");
+
+	/* Force Modem mode */
+	if (option_zero_cd == ZCD_FORCE_MODEM) {
+		usb_stor_dbg(us, "Option MS: %s\n", "Forcing Modem Mode");
+		result = option_rezero(us);
+		if (result != USB_STOR_XFER_GOOD)
+			usb_stor_dbg(us, "Option MS: %s\n",
+				     "Failed to switch to modem mode");
+		return -EIO;
+	} else if (option_zero_cd == ZCD_ALLOW_MS) {
+		/* Allow Mass Storage mode (keep CD-Rom) */
+		usb_stor_dbg(us, "Option MS: %s\n",
+			     "Allowing Mass Storage Mode if device requests it");
+	}
+
+	return 0;
+}
+
diff --git a/drivers/usb/storage/option_ms.h b/drivers/usb/storage/option_ms.h
new file mode 100644
index 000000000..643999218
--- /dev/null
+++ b/drivers/usb/storage/option_ms.h
@@ -0,0 +1,5 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _OPTION_MS_H_
+#define _OPTION_MS_H_
+extern int option_ms_init(struct us_data *us);
+#endif
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
new file mode 100644
index 000000000..9033e505d
--- /dev/null
+++ b/drivers/usb/storage/protocol.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for USB Mass Storage compliant devices
+ *
+ * Current development and maintenance by:
+ *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Developed with the assistance of:
+ *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
+ *   (c) 2002 Alan Stern (stern@rowland.org)
+ *
+ * Initial work by:
+ *   (c) 1999 Michael Gee (michael@linuxspecific.com)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices.  Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document.  The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ */
+
+#include <linux/highmem.h>
+#include <linux/export.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "usb.h"
+#include "protocol.h"
+#include "debug.h"
+#include "scsiglue.h"
+#include "transport.h"
+
+/***********************************************************************
+ * Protocol routines
+ ***********************************************************************/
+
+void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us)
+{
+	/*
+	 * Pad the SCSI command with zeros out to 12 bytes.  If the
+	 * command already is 12 bytes or longer, leave it alone.
+	 *
+	 * NOTE: This only works because a scsi_cmnd struct field contains
+	 * a unsigned char cmnd[16], so we know we have storage available
+	 */
+	for (; srb->cmd_len < 12; srb->cmd_len++)
+		srb->cmnd[srb->cmd_len] = 0;
+
+	/* send the command to the transport layer */
+	usb_stor_invoke_transport(srb, us);
+}
+
+void usb_stor_ufi_command(struct scsi_cmnd *srb, struct us_data *us)
+{
+	/*
+	 * fix some commands -- this is a form of mode translation
+	 * UFI devices only accept 12 byte long commands
+	 *
+	 * NOTE: This only works because a scsi_cmnd struct field contains
+	 * a unsigned char cmnd[16], so we know we have storage available
+	 */
+
+	/* Pad the ATAPI command with zeros */
+	for (; srb->cmd_len < 12; srb->cmd_len++)
+		srb->cmnd[srb->cmd_len] = 0;
+
+	/* set command length to 12 bytes (this affects the transport layer) */
+	srb->cmd_len = 12;
+
+	/* XXX We should be constantly re-evaluating the need for these */
+
+	/* determine the correct data length for these commands */
+	switch (srb->cmnd[0]) {
+
+		/* for INQUIRY, UFI devices only ever return 36 bytes */
+	case INQUIRY:
+		srb->cmnd[4] = 36;
+		break;
+
+		/* again, for MODE_SENSE_10, we get the minimum (8) */
+	case MODE_SENSE_10:
+		srb->cmnd[7] = 0;
+		srb->cmnd[8] = 8;
+		break;
+
+		/* for REQUEST_SENSE, UFI devices only ever return 18 bytes */
+	case REQUEST_SENSE:
+		srb->cmnd[4] = 18;
+		break;
+	} /* end switch on cmnd[0] */
+
+	/* send the command to the transport layer */
+	usb_stor_invoke_transport(srb, us);
+}
+
+void usb_stor_transparent_scsi_command(struct scsi_cmnd *srb,
+				       struct us_data *us)
+{
+	/* send the command to the transport layer */
+	usb_stor_invoke_transport(srb, us);
+}
+EXPORT_SYMBOL_GPL(usb_stor_transparent_scsi_command);
+
+/***********************************************************************
+ * Scatter-gather transfer buffer access routines
+ ***********************************************************************/
+
+/*
+ * Copy a buffer of length buflen to/from the srb's transfer buffer.
+ * Update the **sgptr and *offset variables so that the next copy will
+ * pick up from where this one left off.
+ */
+unsigned int usb_stor_access_xfer_buf(unsigned char *buffer,
+	unsigned int buflen, struct scsi_cmnd *srb, struct scatterlist **sgptr,
+	unsigned int *offset, enum xfer_buf_dir dir)
+{
+	unsigned int cnt = 0;
+	struct scatterlist *sg = *sgptr;
+	struct sg_mapping_iter miter;
+	unsigned int nents = scsi_sg_count(srb);
+
+	if (sg)
+		nents = sg_nents(sg);
+	else
+		sg = scsi_sglist(srb);
+
+	sg_miter_start(&miter, sg, nents, dir == FROM_XFER_BUF ?
+		SG_MITER_FROM_SG: SG_MITER_TO_SG);
+
+	if (!sg_miter_skip(&miter, *offset))
+		return cnt;
+
+	while (sg_miter_next(&miter) && cnt < buflen) {
+		unsigned int len = min_t(unsigned int, miter.length,
+				buflen - cnt);
+
+		if (dir == FROM_XFER_BUF)
+			memcpy(buffer + cnt, miter.addr, len);
+		else
+			memcpy(miter.addr, buffer + cnt, len);
+
+		if (*offset + len < miter.piter.sg->length) {
+			*offset += len;
+			*sgptr = miter.piter.sg;
+		} else {
+			*offset = 0;
+			*sgptr = sg_next(miter.piter.sg);
+		}
+		cnt += len;
+	}
+	sg_miter_stop(&miter);
+
+	return cnt;
+}
+EXPORT_SYMBOL_GPL(usb_stor_access_xfer_buf);
+
+/*
+ * Store the contents of buffer into srb's transfer buffer and set the
+ * SCSI residue.
+ */
+void usb_stor_set_xfer_buf(unsigned char *buffer,
+	unsigned int buflen, struct scsi_cmnd *srb)
+{
+	unsigned int offset = 0;
+	struct scatterlist *sg = NULL;
+
+	buflen = min(buflen, scsi_bufflen(srb));
+	buflen = usb_stor_access_xfer_buf(buffer, buflen, srb, &sg, &offset,
+			TO_XFER_BUF);
+	if (buflen < scsi_bufflen(srb))
+		scsi_set_resid(srb, scsi_bufflen(srb) - buflen);
+}
+EXPORT_SYMBOL_GPL(usb_stor_set_xfer_buf);
diff --git a/drivers/usb/storage/protocol.h b/drivers/usb/storage/protocol.h
new file mode 100644
index 000000000..1d102463a
--- /dev/null
+++ b/drivers/usb/storage/protocol.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Driver for USB Mass Storage compliant devices
+ * Protocol Functions Header File
+ *
+ * Current development and maintenance by:
+ *   (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices.  Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document.  The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ */
+
+#ifndef _PROTOCOL_H_
+#define _PROTOCOL_H_
+
+/* Protocol handling routines */
+extern void usb_stor_pad12_command(struct scsi_cmnd*, struct us_data*);
+extern void usb_stor_ufi_command(struct scsi_cmnd*, struct us_data*);
+extern void usb_stor_transparent_scsi_command(struct scsi_cmnd*,
+		struct us_data*);
+
+/* struct scsi_cmnd transfer buffer access utilities */
+enum xfer_buf_dir	{TO_XFER_BUF, FROM_XFER_BUF};
+
+extern unsigned int usb_stor_access_xfer_buf(unsigned char *buffer,
+	unsigned int buflen, struct scsi_cmnd *srb, struct scatterlist **,
+	unsigned int *offset, enum xfer_buf_dir dir);
+
+extern void usb_stor_set_xfer_buf(unsigned char *buffer,
+	unsigned int buflen, struct scsi_cmnd *srb);
+#endif
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
new file mode 100644
index 000000000..0c423916d
--- /dev/null
+++ b/drivers/usb/storage/realtek_cr.c
@@ -0,0 +1,1070 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Realtek RTS51xx USB card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * Author:
+ *   wwang (wei_wang@realsil.com.cn)
+ *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/module.h>
+#include <linux/blkdev.h>
+#include <linux/kthread.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <linux/cdrom.h>
+
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/usb_usual.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "scsiglue.h"
+
+#define DRV_NAME "ums-realtek"
+
+MODULE_DESCRIPTION("Driver for Realtek USB Card Reader");
+MODULE_AUTHOR("wwang <wei_wang@realsil.com.cn>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(USB_STORAGE);
+
+static int auto_delink_en = 1;
+module_param(auto_delink_en, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(auto_delink_en, "auto delink mode (0=firmware, 1=software [default])");
+
+#ifdef CONFIG_REALTEK_AUTOPM
+static int ss_en = 1;
+module_param(ss_en, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ss_en, "enable selective suspend");
+
+static int ss_delay = 50;
+module_param(ss_delay, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ss_delay,
+		 "seconds to delay before entering selective suspend");
+
+enum RTS51X_STAT {
+	RTS51X_STAT_INIT,
+	RTS51X_STAT_IDLE,
+	RTS51X_STAT_RUN,
+	RTS51X_STAT_SS
+};
+
+#define POLLING_INTERVAL	50
+
+#define rts51x_set_stat(chip, stat)	\
+	((chip)->state = (enum RTS51X_STAT)(stat))
+#define rts51x_get_stat(chip)		((chip)->state)
+
+#define SET_LUN_READY(chip, lun)	((chip)->lun_ready |= ((u8)1 << (lun)))
+#define CLR_LUN_READY(chip, lun)	((chip)->lun_ready &= ~((u8)1 << (lun)))
+#define TST_LUN_READY(chip, lun)	((chip)->lun_ready & ((u8)1 << (lun)))
+
+#endif
+
+struct rts51x_status {
+	u16 vid;
+	u16 pid;
+	u8 cur_lun;
+	u8 card_type;
+	u8 total_lun;
+	u16 fw_ver;
+	u8 phy_exist;
+	u8 multi_flag;
+	u8 multi_card;
+	u8 log_exist;
+	union {
+		u8 detailed_type1;
+		u8 detailed_type2;
+	} detailed_type;
+	u8 function[2];
+};
+
+struct rts51x_chip {
+	u16 vendor_id;
+	u16 product_id;
+	char max_lun;
+
+	struct rts51x_status *status;
+	int status_len;
+
+	u32 flag;
+	struct us_data *us;
+
+#ifdef CONFIG_REALTEK_AUTOPM
+	struct timer_list rts51x_suspend_timer;
+	unsigned long timer_expires;
+	int pwr_state;
+	u8 lun_ready;
+	enum RTS51X_STAT state;
+	int support_auto_delink;
+#endif
+	/* used to back up the protocol chosen in probe1 phase */
+	proto_cmnd proto_handler_backup;
+};
+
+/* flag definition */
+#define FLIDX_AUTO_DELINK		0x01
+
+#define SCSI_LUN(srb)			((srb)->device->lun)
+
+/* Bit Operation */
+#define SET_BIT(data, idx)		((data) |= 1 << (idx))
+#define CLR_BIT(data, idx)		((data) &= ~(1 << (idx)))
+#define CHK_BIT(data, idx)		((data) & (1 << (idx)))
+
+#define SET_AUTO_DELINK(chip)		((chip)->flag |= FLIDX_AUTO_DELINK)
+#define CLR_AUTO_DELINK(chip)		((chip)->flag &= ~FLIDX_AUTO_DELINK)
+#define CHK_AUTO_DELINK(chip)		((chip)->flag & FLIDX_AUTO_DELINK)
+
+#define RTS51X_GET_VID(chip)		((chip)->vendor_id)
+#define RTS51X_GET_PID(chip)		((chip)->product_id)
+
+#define VENDOR_ID(chip)			((chip)->status[0].vid)
+#define PRODUCT_ID(chip)		((chip)->status[0].pid)
+#define FW_VERSION(chip)		((chip)->status[0].fw_ver)
+#define STATUS_LEN(chip)		((chip)->status_len)
+
+#define STATUS_SUCCESS		0
+#define STATUS_FAIL		1
+
+/* Check card reader function */
+#define SUPPORT_DETAILED_TYPE1(chip)	\
+		CHK_BIT((chip)->status[0].function[0], 1)
+#define SUPPORT_OT(chip)		\
+		CHK_BIT((chip)->status[0].function[0], 2)
+#define SUPPORT_OC(chip)		\
+		CHK_BIT((chip)->status[0].function[0], 3)
+#define SUPPORT_AUTO_DELINK(chip)	\
+		CHK_BIT((chip)->status[0].function[0], 4)
+#define SUPPORT_SDIO(chip)		\
+		CHK_BIT((chip)->status[0].function[1], 0)
+#define SUPPORT_DETAILED_TYPE2(chip)	\
+		CHK_BIT((chip)->status[0].function[1], 1)
+
+#define CHECK_PID(chip, pid)		(RTS51X_GET_PID(chip) == (pid))
+#define CHECK_FW_VER(chip, fw_ver)	(FW_VERSION(chip) == (fw_ver))
+#define CHECK_ID(chip, pid, fw_ver)	\
+		(CHECK_PID((chip), (pid)) && CHECK_FW_VER((chip), (fw_ver)))
+
+static int init_realtek_cr(struct us_data *us);
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{\
+	USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+	.driver_info = (flags) \
+}
+
+static const struct usb_device_id realtek_cr_ids[] = {
+#	include "unusual_realtek.h"
+	{}			/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, realtek_cr_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev realtek_cr_unusual_dev_list[] = {
+#	include "unusual_realtek.h"
+	{}			/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+static int rts51x_bulk_transport(struct us_data *us, u8 lun,
+				 u8 *cmd, int cmd_len, u8 *buf, int buf_len,
+				 enum dma_data_direction dir, int *act_len)
+{
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *)us->iobuf;
+	struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *)us->iobuf;
+	int result;
+	unsigned int residue;
+	unsigned int cswlen;
+	unsigned int cbwlen = US_BULK_CB_WRAP_LEN;
+
+	/* set up the command wrapper */
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = cpu_to_le32(buf_len);
+	bcb->Flags = (dir == DMA_FROM_DEVICE) ? US_BULK_FLAG_IN : 0;
+	bcb->Tag = ++us->tag;
+	bcb->Lun = lun;
+	bcb->Length = cmd_len;
+
+	/* copy the command payload */
+	memset(bcb->CDB, 0, sizeof(bcb->CDB));
+	memcpy(bcb->CDB, cmd, bcb->Length);
+
+	/* send it to out endpoint */
+	result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+					    bcb, cbwlen, NULL);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/* DATA STAGE */
+	/* send/receive data payload, if there is any */
+
+	if (buf && buf_len) {
+		unsigned int pipe = (dir == DMA_FROM_DEVICE) ?
+		    us->recv_bulk_pipe : us->send_bulk_pipe;
+		result = usb_stor_bulk_transfer_buf(us, pipe,
+						    buf, buf_len, NULL);
+		if (result == USB_STOR_XFER_ERROR)
+			return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/* get CSW for device status */
+	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+					    bcs, US_BULK_CS_WRAP_LEN, &cswlen);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/* check bulk status */
+	if (bcs->Signature != cpu_to_le32(US_BULK_CS_SIGN)) {
+		usb_stor_dbg(us, "Signature mismatch: got %08X, expecting %08X\n",
+			     le32_to_cpu(bcs->Signature), US_BULK_CS_SIGN);
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	residue = bcs->Residue;
+	if (bcs->Tag != us->tag)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/*
+	 * try to compute the actual residue, based on how much data
+	 * was really transferred and what the device tells us
+	 */
+	if (residue)
+		residue = residue < buf_len ? residue : buf_len;
+
+	if (act_len)
+		*act_len = buf_len - residue;
+
+	/* based on the status code, we report good or bad */
+	switch (bcs->Status) {
+	case US_BULK_STAT_OK:
+		/* command good -- note that data could be short */
+		return USB_STOR_TRANSPORT_GOOD;
+
+	case US_BULK_STAT_FAIL:
+		/* command failed */
+		return USB_STOR_TRANSPORT_FAILED;
+
+	case US_BULK_STAT_PHASE:
+		/*
+		 * phase error -- note that a transport reset will be
+		 * invoked by the invoke_transport() function
+		 */
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/* we should never get here, but if we do, we're in trouble */
+	return USB_STOR_TRANSPORT_ERROR;
+}
+
+static int rts51x_bulk_transport_special(struct us_data *us, u8 lun,
+				 u8 *cmd, int cmd_len, u8 *buf, int buf_len,
+				 enum dma_data_direction dir, int *act_len)
+{
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf;
+	int result;
+	unsigned int cswlen;
+	unsigned int cbwlen = US_BULK_CB_WRAP_LEN;
+
+	/* set up the command wrapper */
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = cpu_to_le32(buf_len);
+	bcb->Flags = (dir == DMA_FROM_DEVICE) ? US_BULK_FLAG_IN : 0;
+	bcb->Tag = ++us->tag;
+	bcb->Lun = lun;
+	bcb->Length = cmd_len;
+
+	/* copy the command payload */
+	memset(bcb->CDB, 0, sizeof(bcb->CDB));
+	memcpy(bcb->CDB, cmd, bcb->Length);
+
+	/* send it to out endpoint */
+	result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+				bcb, cbwlen, NULL);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/* DATA STAGE */
+	/* send/receive data payload, if there is any */
+
+	if (buf && buf_len) {
+		unsigned int pipe = (dir == DMA_FROM_DEVICE) ?
+				us->recv_bulk_pipe : us->send_bulk_pipe;
+		result = usb_stor_bulk_transfer_buf(us, pipe,
+				buf, buf_len, NULL);
+		if (result == USB_STOR_XFER_ERROR)
+			return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/* get CSW for device status */
+	result = usb_bulk_msg(us->pusb_dev, us->recv_bulk_pipe, bcs,
+			US_BULK_CS_WRAP_LEN, &cswlen, 250);
+	return result;
+}
+
+/* Determine what the maximum LUN supported is */
+static int rts51x_get_max_lun(struct us_data *us)
+{
+	int result;
+
+	/* issue the command */
+	us->iobuf[0] = 0;
+	result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
+				      US_BULK_GET_MAX_LUN,
+				      USB_DIR_IN | USB_TYPE_CLASS |
+				      USB_RECIP_INTERFACE,
+				      0, us->ifnum, us->iobuf, 1, 10 * HZ);
+
+	usb_stor_dbg(us, "GetMaxLUN command result is %d, data is %d\n",
+		     result, us->iobuf[0]);
+
+	/* if we have a successful request, return the result */
+	if (result > 0)
+		return us->iobuf[0];
+
+	return 0;
+}
+
+static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
+{
+	int retval;
+	u8 cmnd[12] = { 0 };
+	u8 *buf;
+
+	buf = kmalloc(len, GFP_NOIO);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len);
+
+	cmnd[0] = 0xF0;
+	cmnd[1] = 0x0D;
+	cmnd[2] = (u8) (addr >> 8);
+	cmnd[3] = (u8) addr;
+	cmnd[4] = (u8) (len >> 8);
+	cmnd[5] = (u8) len;
+
+	retval = rts51x_bulk_transport(us, 0, cmnd, 12,
+				       buf, len, DMA_FROM_DEVICE, NULL);
+	if (retval != USB_STOR_TRANSPORT_GOOD) {
+		kfree(buf);
+		return -EIO;
+	}
+
+	memcpy(data, buf, len);
+	kfree(buf);
+	return 0;
+}
+
+static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
+{
+	int retval;
+	u8 cmnd[12] = { 0 };
+	u8 *buf;
+
+	buf = kmemdup(data, len, GFP_NOIO);
+	if (buf == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len);
+
+	cmnd[0] = 0xF0;
+	cmnd[1] = 0x0E;
+	cmnd[2] = (u8) (addr >> 8);
+	cmnd[3] = (u8) addr;
+	cmnd[4] = (u8) (len >> 8);
+	cmnd[5] = (u8) len;
+
+	retval = rts51x_bulk_transport(us, 0, cmnd, 12,
+				       buf, len, DMA_TO_DEVICE, NULL);
+	kfree(buf);
+	if (retval != USB_STOR_TRANSPORT_GOOD)
+		return -EIO;
+
+	return 0;
+}
+
+static int rts51x_read_status(struct us_data *us,
+			      u8 lun, u8 *status, int len, int *actlen)
+{
+	int retval;
+	u8 cmnd[12] = { 0 };
+	u8 *buf;
+
+	buf = kmalloc(len, GFP_NOIO);
+	if (buf == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	usb_stor_dbg(us, "lun = %d\n", lun);
+
+	cmnd[0] = 0xF0;
+	cmnd[1] = 0x09;
+
+	retval = rts51x_bulk_transport(us, lun, cmnd, 12,
+				       buf, len, DMA_FROM_DEVICE, actlen);
+	if (retval != USB_STOR_TRANSPORT_GOOD) {
+		kfree(buf);
+		return -EIO;
+	}
+
+	memcpy(status, buf, len);
+	kfree(buf);
+	return 0;
+}
+
+static int rts51x_check_status(struct us_data *us, u8 lun)
+{
+	struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+	int retval;
+	u8 buf[16];
+
+	retval = rts51x_read_status(us, lun, buf, 16, &(chip->status_len));
+	if (retval != STATUS_SUCCESS)
+		return -EIO;
+
+	usb_stor_dbg(us, "chip->status_len = %d\n", chip->status_len);
+
+	chip->status[lun].vid = ((u16) buf[0] << 8) | buf[1];
+	chip->status[lun].pid = ((u16) buf[2] << 8) | buf[3];
+	chip->status[lun].cur_lun = buf[4];
+	chip->status[lun].card_type = buf[5];
+	chip->status[lun].total_lun = buf[6];
+	chip->status[lun].fw_ver = ((u16) buf[7] << 8) | buf[8];
+	chip->status[lun].phy_exist = buf[9];
+	chip->status[lun].multi_flag = buf[10];
+	chip->status[lun].multi_card = buf[11];
+	chip->status[lun].log_exist = buf[12];
+	if (chip->status_len == 16) {
+		chip->status[lun].detailed_type.detailed_type1 = buf[13];
+		chip->status[lun].function[0] = buf[14];
+		chip->status[lun].function[1] = buf[15];
+	}
+
+	return 0;
+}
+
+static int enable_oscillator(struct us_data *us)
+{
+	int retval;
+	u8 value;
+
+	retval = rts51x_read_mem(us, 0xFE77, &value, 1);
+	if (retval < 0)
+		return -EIO;
+
+	value |= 0x04;
+	retval = rts51x_write_mem(us, 0xFE77, &value, 1);
+	if (retval < 0)
+		return -EIO;
+
+	retval = rts51x_read_mem(us, 0xFE77, &value, 1);
+	if (retval < 0)
+		return -EIO;
+
+	if (!(value & 0x04))
+		return -EIO;
+
+	return 0;
+}
+
+static int __do_config_autodelink(struct us_data *us, u8 *data, u16 len)
+{
+	int retval;
+	u8 cmnd[12] = {0};
+	u8 *buf;
+
+	usb_stor_dbg(us, "addr = 0xfe47, len = %d\n", len);
+
+	buf = kmemdup(data, len, GFP_NOIO);
+	if (!buf)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	cmnd[0] = 0xF0;
+	cmnd[1] = 0x0E;
+	cmnd[2] = 0xfe;
+	cmnd[3] = 0x47;
+	cmnd[4] = (u8)(len >> 8);
+	cmnd[5] = (u8)len;
+
+	retval = rts51x_bulk_transport_special(us, 0, cmnd, 12, buf, len, DMA_TO_DEVICE, NULL);
+	kfree(buf);
+	if (retval != USB_STOR_TRANSPORT_GOOD) {
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int do_config_autodelink(struct us_data *us, int enable, int force)
+{
+	int retval;
+	u8 value;
+
+	retval = rts51x_read_mem(us, 0xFE47, &value, 1);
+	if (retval < 0)
+		return -EIO;
+
+	if (enable) {
+		if (force)
+			value |= 0x03;
+		else
+			value |= 0x01;
+	} else {
+		value &= ~0x03;
+	}
+
+	usb_stor_dbg(us, "set 0xfe47 to 0x%x\n", value);
+
+	/* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */
+	retval = __do_config_autodelink(us, &value, 1);
+	if (retval < 0)
+		return -EIO;
+
+	return 0;
+}
+
+static int config_autodelink_after_power_on(struct us_data *us)
+{
+	struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+	int retval;
+	u8 value;
+
+	if (!CHK_AUTO_DELINK(chip))
+		return 0;
+
+	retval = rts51x_read_mem(us, 0xFE47, &value, 1);
+	if (retval < 0)
+		return -EIO;
+
+	if (auto_delink_en) {
+		CLR_BIT(value, 0);
+		CLR_BIT(value, 1);
+		SET_BIT(value, 2);
+
+		if (CHECK_ID(chip, 0x0138, 0x3882))
+			CLR_BIT(value, 2);
+
+		SET_BIT(value, 7);
+
+		/* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */
+		retval = __do_config_autodelink(us, &value, 1);
+		if (retval < 0)
+			return -EIO;
+
+		retval = enable_oscillator(us);
+		if (retval == 0)
+			(void)do_config_autodelink(us, 1, 0);
+	} else {
+		/* Autodelink controlled by firmware */
+
+		SET_BIT(value, 2);
+
+		if (CHECK_ID(chip, 0x0138, 0x3882))
+			CLR_BIT(value, 2);
+
+		if (CHECK_ID(chip, 0x0159, 0x5889) ||
+		    CHECK_ID(chip, 0x0138, 0x3880)) {
+			CLR_BIT(value, 0);
+			CLR_BIT(value, 7);
+		}
+
+		/* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */
+		retval = __do_config_autodelink(us, &value, 1);
+		if (retval < 0)
+			return -EIO;
+
+		if (CHECK_ID(chip, 0x0159, 0x5888)) {
+			value = 0xFF;
+			retval = rts51x_write_mem(us, 0xFE79, &value, 1);
+			if (retval < 0)
+				return -EIO;
+
+			value = 0x01;
+			retval = rts51x_write_mem(us, 0x48, &value, 1);
+			if (retval < 0)
+				return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int config_autodelink_before_power_down(struct us_data *us)
+{
+	struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+	int retval;
+	u8 value;
+
+	if (!CHK_AUTO_DELINK(chip))
+		return 0;
+
+	if (auto_delink_en) {
+		retval = rts51x_read_mem(us, 0xFE77, &value, 1);
+		if (retval < 0)
+			return -EIO;
+
+		SET_BIT(value, 2);
+		retval = rts51x_write_mem(us, 0xFE77, &value, 1);
+		if (retval < 0)
+			return -EIO;
+
+		if (CHECK_ID(chip, 0x0159, 0x5888)) {
+			value = 0x01;
+			retval = rts51x_write_mem(us, 0x48, &value, 1);
+			if (retval < 0)
+				return -EIO;
+		}
+
+		retval = rts51x_read_mem(us, 0xFE47, &value, 1);
+		if (retval < 0)
+			return -EIO;
+
+		SET_BIT(value, 0);
+		if (CHECK_ID(chip, 0x0138, 0x3882))
+			SET_BIT(value, 2);
+		retval = rts51x_write_mem(us, 0xFE77, &value, 1);
+		if (retval < 0)
+			return -EIO;
+	} else {
+		if (CHECK_ID(chip, 0x0159, 0x5889) ||
+		    CHECK_ID(chip, 0x0138, 0x3880) ||
+		    CHECK_ID(chip, 0x0138, 0x3882)) {
+			retval = rts51x_read_mem(us, 0xFE47, &value, 1);
+			if (retval < 0)
+				return -EIO;
+
+			if (CHECK_ID(chip, 0x0159, 0x5889) ||
+			    CHECK_ID(chip, 0x0138, 0x3880)) {
+				SET_BIT(value, 0);
+				SET_BIT(value, 7);
+			}
+
+			if (CHECK_ID(chip, 0x0138, 0x3882))
+				SET_BIT(value, 2);
+
+			/* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */
+			retval = __do_config_autodelink(us, &value, 1);
+			if (retval < 0)
+				return -EIO;
+		}
+
+		if (CHECK_ID(chip, 0x0159, 0x5888)) {
+			value = 0x01;
+			retval = rts51x_write_mem(us, 0x48, &value, 1);
+			if (retval < 0)
+				return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static void fw5895_init(struct us_data *us)
+{
+	struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+	int retval;
+	u8 val;
+
+	if ((PRODUCT_ID(chip) != 0x0158) || (FW_VERSION(chip) != 0x5895)) {
+		usb_stor_dbg(us, "Not the specified device, return immediately!\n");
+	} else {
+		retval = rts51x_read_mem(us, 0xFD6F, &val, 1);
+		if (retval == STATUS_SUCCESS && (val & 0x1F) == 0) {
+			val = 0x1F;
+			retval = rts51x_write_mem(us, 0xFD70, &val, 1);
+			if (retval != STATUS_SUCCESS)
+				usb_stor_dbg(us, "Write memory fail\n");
+		} else {
+			usb_stor_dbg(us, "Read memory fail, OR (val & 0x1F) != 0\n");
+		}
+	}
+}
+#endif
+
+#ifdef CONFIG_REALTEK_AUTOPM
+static void fw5895_set_mmc_wp(struct us_data *us)
+{
+	struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+	int retval;
+	u8 buf[13];
+
+	if ((PRODUCT_ID(chip) != 0x0158) || (FW_VERSION(chip) != 0x5895)) {
+		usb_stor_dbg(us, "Not the specified device, return immediately!\n");
+	} else {
+		retval = rts51x_read_mem(us, 0xFD6F, buf, 1);
+		if (retval == STATUS_SUCCESS && (buf[0] & 0x24) == 0x24) {
+			/* SD Exist and SD WP */
+			retval = rts51x_read_mem(us, 0xD04E, buf, 1);
+			if (retval == STATUS_SUCCESS) {
+				buf[0] |= 0x04;
+				retval = rts51x_write_mem(us, 0xFD70, buf, 1);
+				if (retval != STATUS_SUCCESS)
+					usb_stor_dbg(us, "Write memory fail\n");
+			} else {
+				usb_stor_dbg(us, "Read memory fail\n");
+			}
+		} else {
+			usb_stor_dbg(us, "Read memory fail, OR (buf[0]&0x24)!=0x24\n");
+		}
+	}
+}
+
+static void rts51x_modi_suspend_timer(struct rts51x_chip *chip)
+{
+	struct us_data *us = chip->us;
+
+	usb_stor_dbg(us, "state:%d\n", rts51x_get_stat(chip));
+
+	chip->timer_expires = jiffies + msecs_to_jiffies(1000*ss_delay);
+	mod_timer(&chip->rts51x_suspend_timer, chip->timer_expires);
+}
+
+static void rts51x_suspend_timer_fn(struct timer_list *t)
+{
+	struct rts51x_chip *chip = from_timer(chip, t, rts51x_suspend_timer);
+	struct us_data *us = chip->us;
+
+	switch (rts51x_get_stat(chip)) {
+	case RTS51X_STAT_INIT:
+	case RTS51X_STAT_RUN:
+		rts51x_modi_suspend_timer(chip);
+		break;
+	case RTS51X_STAT_IDLE:
+	case RTS51X_STAT_SS:
+		usb_stor_dbg(us, "RTS51X_STAT_SS, power.usage:%d\n",
+			     atomic_read(&us->pusb_intf->dev.power.usage_count));
+
+		if (atomic_read(&us->pusb_intf->dev.power.usage_count) > 0) {
+			usb_stor_dbg(us, "Ready to enter SS state\n");
+			rts51x_set_stat(chip, RTS51X_STAT_SS);
+			/* ignore mass storage interface's children */
+			pm_suspend_ignore_children(&us->pusb_intf->dev, true);
+			usb_autopm_put_interface_async(us->pusb_intf);
+			usb_stor_dbg(us, "RTS51X_STAT_SS 01, power.usage:%d\n",
+				     atomic_read(&us->pusb_intf->dev.power.usage_count));
+		}
+		break;
+	default:
+		usb_stor_dbg(us, "Unknown state !!!\n");
+		break;
+	}
+}
+
+static inline int working_scsi(struct scsi_cmnd *srb)
+{
+	if ((srb->cmnd[0] == TEST_UNIT_READY) ||
+	    (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL)) {
+		return 0;
+	}
+
+	return 1;
+}
+
+static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+	static int card_first_show = 1;
+	static u8 media_not_present[] = { 0x70, 0, 0x02, 0, 0, 0, 0,
+		10, 0, 0, 0, 0, 0x3A, 0, 0, 0, 0, 0
+	};
+	static u8 invalid_cmd_field[] = { 0x70, 0, 0x05, 0, 0, 0, 0,
+		10, 0, 0, 0, 0, 0x24, 0, 0, 0, 0, 0
+	};
+	int ret;
+
+	if (working_scsi(srb)) {
+		usb_stor_dbg(us, "working scsi, power.usage:%d\n",
+			     atomic_read(&us->pusb_intf->dev.power.usage_count));
+
+		if (atomic_read(&us->pusb_intf->dev.power.usage_count) <= 0) {
+			ret = usb_autopm_get_interface(us->pusb_intf);
+			usb_stor_dbg(us, "working scsi, ret=%d\n", ret);
+		}
+		if (rts51x_get_stat(chip) != RTS51X_STAT_RUN)
+			rts51x_set_stat(chip, RTS51X_STAT_RUN);
+		chip->proto_handler_backup(srb, us);
+	} else {
+		if (rts51x_get_stat(chip) == RTS51X_STAT_SS) {
+			usb_stor_dbg(us, "NOT working scsi\n");
+			if ((srb->cmnd[0] == TEST_UNIT_READY) &&
+			    (chip->pwr_state == US_SUSPEND)) {
+				if (TST_LUN_READY(chip, srb->device->lun)) {
+					srb->result = SAM_STAT_GOOD;
+				} else {
+					srb->result = SAM_STAT_CHECK_CONDITION;
+					memcpy(srb->sense_buffer,
+					       media_not_present,
+					       US_SENSE_SIZE);
+				}
+				usb_stor_dbg(us, "TEST_UNIT_READY\n");
+				goto out;
+			}
+			if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+				int prevent = srb->cmnd[4] & 0x1;
+				if (prevent) {
+					srb->result = SAM_STAT_CHECK_CONDITION;
+					memcpy(srb->sense_buffer,
+					       invalid_cmd_field,
+					       US_SENSE_SIZE);
+				} else {
+					srb->result = SAM_STAT_GOOD;
+				}
+				usb_stor_dbg(us, "ALLOW_MEDIUM_REMOVAL\n");
+				goto out;
+			}
+		} else {
+			usb_stor_dbg(us, "NOT working scsi, not SS\n");
+			chip->proto_handler_backup(srb, us);
+			/* Check whether card is plugged in */
+			if (srb->cmnd[0] == TEST_UNIT_READY) {
+				if (srb->result == SAM_STAT_GOOD) {
+					SET_LUN_READY(chip, srb->device->lun);
+					if (card_first_show) {
+						card_first_show = 0;
+						fw5895_set_mmc_wp(us);
+					}
+				} else {
+					CLR_LUN_READY(chip, srb->device->lun);
+					card_first_show = 1;
+				}
+			}
+			if (rts51x_get_stat(chip) != RTS51X_STAT_IDLE)
+				rts51x_set_stat(chip, RTS51X_STAT_IDLE);
+		}
+	}
+out:
+	usb_stor_dbg(us, "state:%d\n", rts51x_get_stat(chip));
+	if (rts51x_get_stat(chip) == RTS51X_STAT_RUN)
+		rts51x_modi_suspend_timer(chip);
+}
+
+static int realtek_cr_autosuspend_setup(struct us_data *us)
+{
+	struct rts51x_chip *chip;
+	struct rts51x_status *status = NULL;
+	u8 buf[16];
+	int retval;
+
+	chip = (struct rts51x_chip *)us->extra;
+	chip->support_auto_delink = 0;
+	chip->pwr_state = US_RESUME;
+	chip->lun_ready = 0;
+	rts51x_set_stat(chip, RTS51X_STAT_INIT);
+
+	retval = rts51x_read_status(us, 0, buf, 16, &(chip->status_len));
+	if (retval != STATUS_SUCCESS) {
+		usb_stor_dbg(us, "Read status fail\n");
+		return -EIO;
+	}
+	status = chip->status;
+	status->vid = ((u16) buf[0] << 8) | buf[1];
+	status->pid = ((u16) buf[2] << 8) | buf[3];
+	status->cur_lun = buf[4];
+	status->card_type = buf[5];
+	status->total_lun = buf[6];
+	status->fw_ver = ((u16) buf[7] << 8) | buf[8];
+	status->phy_exist = buf[9];
+	status->multi_flag = buf[10];
+	status->multi_card = buf[11];
+	status->log_exist = buf[12];
+	if (chip->status_len == 16) {
+		status->detailed_type.detailed_type1 = buf[13];
+		status->function[0] = buf[14];
+		status->function[1] = buf[15];
+	}
+
+	/* back up the proto_handler in us->extra */
+	chip = (struct rts51x_chip *)(us->extra);
+	chip->proto_handler_backup = us->proto_handler;
+	/* Set the autosuspend_delay to 0 */
+	pm_runtime_set_autosuspend_delay(&us->pusb_dev->dev, 0);
+	/* override us->proto_handler setted in get_protocol() */
+	us->proto_handler = rts51x_invoke_transport;
+
+	chip->timer_expires = 0;
+	timer_setup(&chip->rts51x_suspend_timer, rts51x_suspend_timer_fn, 0);
+	fw5895_init(us);
+
+	/* enable autosuspend function of the usb device */
+	usb_enable_autosuspend(us->pusb_dev);
+
+	return 0;
+}
+#endif
+
+static void realtek_cr_destructor(void *extra)
+{
+	struct rts51x_chip *chip = extra;
+
+	if (!chip)
+		return;
+
+#ifdef CONFIG_REALTEK_AUTOPM
+	if (ss_en) {
+		del_timer(&chip->rts51x_suspend_timer);
+		chip->timer_expires = 0;
+	}
+#endif
+	kfree(chip->status);
+}
+
+#ifdef CONFIG_PM
+static int realtek_cr_suspend(struct usb_interface *iface, pm_message_t message)
+{
+	struct us_data *us = usb_get_intfdata(iface);
+
+	/* wait until no command is running */
+	mutex_lock(&us->dev_mutex);
+
+	config_autodelink_before_power_down(us);
+
+	mutex_unlock(&us->dev_mutex);
+
+	return 0;
+}
+
+static int realtek_cr_resume(struct usb_interface *iface)
+{
+	struct us_data *us = usb_get_intfdata(iface);
+
+	fw5895_init(us);
+	config_autodelink_after_power_on(us);
+
+	return 0;
+}
+#else
+#define realtek_cr_suspend	NULL
+#define realtek_cr_resume	NULL
+#endif
+
+static int init_realtek_cr(struct us_data *us)
+{
+	struct rts51x_chip *chip;
+	int size, i, retval;
+
+	chip = kzalloc(sizeof(struct rts51x_chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	us->extra = chip;
+	us->extra_destructor = realtek_cr_destructor;
+	us->max_lun = chip->max_lun = rts51x_get_max_lun(us);
+	chip->us = us;
+
+	usb_stor_dbg(us, "chip->max_lun = %d\n", chip->max_lun);
+
+	size = (chip->max_lun + 1) * sizeof(struct rts51x_status);
+	chip->status = kzalloc(size, GFP_KERNEL);
+	if (!chip->status)
+		goto INIT_FAIL;
+
+	for (i = 0; i <= (int)(chip->max_lun); i++) {
+		retval = rts51x_check_status(us, (u8) i);
+		if (retval < 0)
+			goto INIT_FAIL;
+	}
+
+	if (CHECK_PID(chip, 0x0138) || CHECK_PID(chip, 0x0158) ||
+	    CHECK_PID(chip, 0x0159)) {
+		if (CHECK_FW_VER(chip, 0x5888) || CHECK_FW_VER(chip, 0x5889) ||
+				CHECK_FW_VER(chip, 0x5901))
+			SET_AUTO_DELINK(chip);
+		if (STATUS_LEN(chip) == 16) {
+			if (SUPPORT_AUTO_DELINK(chip))
+				SET_AUTO_DELINK(chip);
+		}
+	}
+#ifdef CONFIG_REALTEK_AUTOPM
+	if (ss_en)
+		realtek_cr_autosuspend_setup(us);
+#endif
+
+	usb_stor_dbg(us, "chip->flag = 0x%x\n", chip->flag);
+
+	(void)config_autodelink_after_power_on(us);
+
+	return 0;
+
+INIT_FAIL:
+	if (us->extra) {
+		kfree(chip->status);
+		kfree(us->extra);
+		us->extra = NULL;
+	}
+
+	return -EIO;
+}
+
+static struct scsi_host_template realtek_cr_host_template;
+
+static int realtek_cr_probe(struct usb_interface *intf,
+			    const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	dev_dbg(&intf->dev, "Probe Realtek Card Reader!\n");
+
+	result = usb_stor_probe1(&us, intf, id,
+				 (id - realtek_cr_ids) +
+				 realtek_cr_unusual_dev_list,
+				 &realtek_cr_host_template);
+	if (result)
+		return result;
+
+	result = usb_stor_probe2(us);
+
+	return result;
+}
+
+static struct usb_driver realtek_cr_driver = {
+	.name = DRV_NAME,
+	.probe = realtek_cr_probe,
+	.disconnect = usb_stor_disconnect,
+	/* .suspend =      usb_stor_suspend, */
+	/* .resume =       usb_stor_resume, */
+	.reset_resume = usb_stor_reset_resume,
+	.suspend = realtek_cr_suspend,
+	.resume = realtek_cr_resume,
+	.pre_reset = usb_stor_pre_reset,
+	.post_reset = usb_stor_post_reset,
+	.id_table = realtek_cr_ids,
+	.soft_unbind = 1,
+	.supports_autosuspend = 1,
+	.no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(realtek_cr_driver, realtek_cr_host_template, DRV_NAME);
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
new file mode 100644
index 000000000..c54e9805d
--- /dev/null
+++ b/drivers/usb/storage/scsiglue.c
@@ -0,0 +1,694 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for USB Mass Storage compliant devices
+ * SCSI layer glue code
+ *
+ * Current development and maintenance by:
+ *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Developed with the assistance of:
+ *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
+ *   (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov)
+ *
+ * Initial work by:
+ *   (c) 1999 Michael Gee (michael@linuxspecific.com)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices.  Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document.  The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ */
+
+#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_devinfo.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+
+#include "usb.h"
+#include <linux/usb/hcd.h>
+#include "scsiglue.h"
+#include "debug.h"
+#include "transport.h"
+#include "protocol.h"
+
+/*
+ * Vendor IDs for companies that seem to include the READ CAPACITY bug
+ * in all their devices
+ */
+#define VENDOR_ID_NOKIA		0x0421
+#define VENDOR_ID_NIKON		0x04b0
+#define VENDOR_ID_PENTAX	0x0a17
+#define VENDOR_ID_MOTOROLA	0x22b8
+
+/***********************************************************************
+ * Host functions 
+ ***********************************************************************/
+
+static const char* host_info(struct Scsi_Host *host)
+{
+	struct us_data *us = host_to_us(host);
+	return us->scsi_name;
+}
+
+static int slave_alloc (struct scsi_device *sdev)
+{
+	struct us_data *us = host_to_us(sdev->host);
+
+	/*
+	 * Set the INQUIRY transfer length to 36.  We don't use any of
+	 * the extra data and many devices choke if asked for more or
+	 * less than 36 bytes.
+	 */
+	sdev->inquiry_len = 36;
+
+	/*
+	 * Some host controllers may have alignment requirements.
+	 * We'll play it safe by requiring 512-byte alignment always.
+	 */
+	blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
+
+	/* Tell the SCSI layer if we know there is more than one LUN */
+	if (us->protocol == USB_PR_BULK && us->max_lun > 0)
+		sdev->sdev_bflags |= BLIST_FORCELUN;
+
+	return 0;
+}
+
+static int slave_configure(struct scsi_device *sdev)
+{
+	struct us_data *us = host_to_us(sdev->host);
+	struct device *dev = us->pusb_dev->bus->sysdev;
+
+	/*
+	 * Many devices have trouble transferring more than 32KB at a time,
+	 * while others have trouble with more than 64K. At this time we
+	 * are limiting both to 32K (64 sectores).
+	 */
+	if (us->fflags & (US_FL_MAX_SECTORS_64 | US_FL_MAX_SECTORS_MIN)) {
+		unsigned int max_sectors = 64;
+
+		if (us->fflags & US_FL_MAX_SECTORS_MIN)
+			max_sectors = PAGE_SIZE >> 9;
+		if (queue_max_hw_sectors(sdev->request_queue) > max_sectors)
+			blk_queue_max_hw_sectors(sdev->request_queue,
+					      max_sectors);
+	} else if (sdev->type == TYPE_TAPE) {
+		/*
+		 * Tapes need much higher max_sector limits, so just
+		 * raise it to the maximum possible (4 GB / 512) and
+		 * let the queue segment size sort out the real limit.
+		 */
+		blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF);
+	} else if (us->pusb_dev->speed >= USB_SPEED_SUPER) {
+		/*
+		 * USB3 devices will be limited to 2048 sectors. This gives us
+		 * better throughput on most devices.
+		 */
+		blk_queue_max_hw_sectors(sdev->request_queue, 2048);
+	}
+
+	/*
+	 * The max_hw_sectors should be up to maximum size of a mapping for
+	 * the device. Otherwise, a DMA API might fail on swiotlb environment.
+	 */
+	blk_queue_max_hw_sectors(sdev->request_queue,
+		min_t(size_t, queue_max_hw_sectors(sdev->request_queue),
+		      dma_max_mapping_size(dev) >> SECTOR_SHIFT));
+
+	/*
+	 * Some USB host controllers can't do DMA; they have to use PIO.
+	 * For such controllers we need to make sure the block layer sets
+	 * up bounce buffers in addressable memory.
+	 */
+	if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)) ||
+			(bus_to_hcd(us->pusb_dev->bus)->localmem_pool != NULL))
+		blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
+
+	/*
+	 * We can't put these settings in slave_alloc() because that gets
+	 * called before the device type is known.  Consequently these
+	 * settings can't be overridden via the scsi devinfo mechanism.
+	 */
+	if (sdev->type == TYPE_DISK) {
+
+		/*
+		 * Some vendors seem to put the READ CAPACITY bug into
+		 * all their devices -- primarily makers of cell phones
+		 * and digital cameras.  Since these devices always use
+		 * flash media and can be expected to have an even number
+		 * of sectors, we will always enable the CAPACITY_HEURISTICS
+		 * flag unless told otherwise.
+		 */
+		switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) {
+		case VENDOR_ID_NOKIA:
+		case VENDOR_ID_NIKON:
+		case VENDOR_ID_PENTAX:
+		case VENDOR_ID_MOTOROLA:
+			if (!(us->fflags & (US_FL_FIX_CAPACITY |
+					US_FL_CAPACITY_OK)))
+				us->fflags |= US_FL_CAPACITY_HEURISTICS;
+			break;
+		}
+
+		/*
+		 * Disk-type devices use MODE SENSE(6) if the protocol
+		 * (SubClass) is Transparent SCSI, otherwise they use
+		 * MODE SENSE(10).
+		 */
+		if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
+			sdev->use_10_for_ms = 1;
+
+		/*
+		 *Many disks only accept MODE SENSE transfer lengths of
+		 * 192 bytes (that's what Windows uses).
+		 */
+		sdev->use_192_bytes_for_3f = 1;
+
+		/*
+		 * Some devices don't like MODE SENSE with page=0x3f,
+		 * which is the command used for checking if a device
+		 * is write-protected.  Now that we tell the sd driver
+		 * to do a 192-byte transfer with this command the
+		 * majority of devices work fine, but a few still can't
+		 * handle it.  The sd driver will simply assume those
+		 * devices are write-enabled.
+		 */
+		if (us->fflags & US_FL_NO_WP_DETECT)
+			sdev->skip_ms_page_3f = 1;
+
+		/*
+		 * A number of devices have problems with MODE SENSE for
+		 * page x08, so we will skip it.
+		 */
+		sdev->skip_ms_page_8 = 1;
+
+		/*
+		 * Some devices don't handle VPD pages correctly, so skip vpd
+		 * pages if not forced by SCSI layer.
+		 */
+		sdev->skip_vpd_pages = !sdev->try_vpd_pages;
+
+		/* Do not attempt to use REPORT SUPPORTED OPERATION CODES */
+		sdev->no_report_opcodes = 1;
+
+		/* Do not attempt to use WRITE SAME */
+		sdev->no_write_same = 1;
+
+		/*
+		 * Some disks return the total number of blocks in response
+		 * to READ CAPACITY rather than the highest block number.
+		 * If this device makes that mistake, tell the sd driver.
+		 */
+		if (us->fflags & US_FL_FIX_CAPACITY)
+			sdev->fix_capacity = 1;
+
+		/*
+		 * A few disks have two indistinguishable version, one of
+		 * which reports the correct capacity and the other does not.
+		 * The sd driver has to guess which is the case.
+		 */
+		if (us->fflags & US_FL_CAPACITY_HEURISTICS)
+			sdev->guess_capacity = 1;
+
+		/* Some devices cannot handle READ_CAPACITY_16 */
+		if (us->fflags & US_FL_NO_READ_CAPACITY_16)
+			sdev->no_read_capacity_16 = 1;
+
+		/*
+		 * Many devices do not respond properly to READ_CAPACITY_16.
+		 * Tell the SCSI layer to try READ_CAPACITY_10 first.
+		 * However some USB 3.0 drive enclosures return capacity
+		 * modulo 2TB. Those must use READ_CAPACITY_16
+		 */
+		if (!(us->fflags & US_FL_NEEDS_CAP16))
+			sdev->try_rc_10_first = 1;
+
+		/*
+		 * assume SPC3 or latter devices support sense size > 18
+		 * unless US_FL_BAD_SENSE quirk is specified.
+		 */
+		if (sdev->scsi_level > SCSI_SPC_2 &&
+		    !(us->fflags & US_FL_BAD_SENSE))
+			us->fflags |= US_FL_SANE_SENSE;
+
+		/*
+		 * USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
+		 * Hardware Error) when any low-level error occurs,
+		 * recoverable or not.  Setting this flag tells the SCSI
+		 * midlayer to retry such commands, which frequently will
+		 * succeed and fix the error.  The worst this can lead to
+		 * is an occasional series of retries that will all fail.
+		 */
+		sdev->retry_hwerror = 1;
+
+		/*
+		 * USB disks should allow restart.  Some drives spin down
+		 * automatically, requiring a START-STOP UNIT command.
+		 */
+		sdev->allow_restart = 1;
+
+		/*
+		 * Some USB cardreaders have trouble reading an sdcard's last
+		 * sector in a larger then 1 sector read, since the performance
+		 * impact is negligible we set this flag for all USB disks
+		 */
+		sdev->last_sector_bug = 1;
+
+		/*
+		 * Enable last-sector hacks for single-target devices using
+		 * the Bulk-only transport, unless we already know the
+		 * capacity will be decremented or is correct.
+		 */
+		if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
+					US_FL_SCM_MULT_TARG)) &&
+				us->protocol == USB_PR_BULK)
+			us->use_last_sector_hacks = 1;
+
+		/* Check if write cache default on flag is set or not */
+		if (us->fflags & US_FL_WRITE_CACHE)
+			sdev->wce_default_on = 1;
+
+		/* A few buggy USB-ATA bridges don't understand FUA */
+		if (us->fflags & US_FL_BROKEN_FUA)
+			sdev->broken_fua = 1;
+
+		/* Some even totally fail to indicate a cache */
+		if (us->fflags & US_FL_ALWAYS_SYNC) {
+			/* don't read caching information */
+			sdev->skip_ms_page_8 = 1;
+			sdev->skip_ms_page_3f = 1;
+			/* assume sync is needed */
+			sdev->wce_default_on = 1;
+		}
+	} else {
+
+		/*
+		 * Non-disk-type devices don't need to ignore any pages
+		 * or to force 192-byte transfer lengths for MODE SENSE.
+		 * But they do need to use MODE SENSE(10).
+		 */
+		sdev->use_10_for_ms = 1;
+
+		/* Some (fake) usb cdrom devices don't like READ_DISC_INFO */
+		if (us->fflags & US_FL_NO_READ_DISC_INFO)
+			sdev->no_read_disc_info = 1;
+	}
+
+	/*
+	 * The CB and CBI transports have no way to pass LUN values
+	 * other than the bits in the second byte of a CDB.  But those
+	 * bits don't get set to the LUN value if the device reports
+	 * scsi_level == 0 (UNKNOWN).  Hence such devices must necessarily
+	 * be single-LUN.
+	 */
+	if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) &&
+			sdev->scsi_level == SCSI_UNKNOWN)
+		us->max_lun = 0;
+
+	/*
+	 * Some devices choke when they receive a PREVENT-ALLOW MEDIUM
+	 * REMOVAL command, so suppress those commands.
+	 */
+	if (us->fflags & US_FL_NOT_LOCKABLE)
+		sdev->lockable = 0;
+
+	/*
+	 * this is to satisfy the compiler, tho I don't think the 
+	 * return code is ever checked anywhere.
+	 */
+	return 0;
+}
+
+static int target_alloc(struct scsi_target *starget)
+{
+	struct us_data *us = host_to_us(dev_to_shost(starget->dev.parent));
+
+	/*
+	 * Some USB drives don't support REPORT LUNS, even though they
+	 * report a SCSI revision level above 2.  Tell the SCSI layer
+	 * not to issue that command; it will perform a normal sequential
+	 * scan instead.
+	 */
+	starget->no_report_luns = 1;
+
+	/*
+	 * The UFI spec treats the Peripheral Qualifier bits in an
+	 * INQUIRY result as reserved and requires devices to set them
+	 * to 0.  However the SCSI spec requires these bits to be set
+	 * to 3 to indicate when a LUN is not present.
+	 *
+	 * Let the scanning code know if this target merely sets
+	 * Peripheral Device Type to 0x1f to indicate no LUN.
+	 */
+	if (us->subclass == USB_SC_UFI)
+		starget->pdt_1f_for_no_lun = 1;
+
+	return 0;
+}
+
+/* queue a command */
+/* This is always called with scsi_lock(host) held */
+static int queuecommand_lck(struct scsi_cmnd *srb)
+{
+	void (*done)(struct scsi_cmnd *) = scsi_done;
+	struct us_data *us = host_to_us(srb->device->host);
+
+	/* check for state-transition errors */
+	if (us->srb != NULL) {
+		dev_err(&us->pusb_intf->dev,
+			"Error in %s: us->srb = %p\n", __func__, us->srb);
+		return SCSI_MLQUEUE_HOST_BUSY;
+	}
+
+	/* fail the command if we are disconnecting */
+	if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
+		usb_stor_dbg(us, "Fail command during disconnect\n");
+		srb->result = DID_NO_CONNECT << 16;
+		done(srb);
+		return 0;
+	}
+
+	if ((us->fflags & US_FL_NO_ATA_1X) &&
+			(srb->cmnd[0] == ATA_12 || srb->cmnd[0] == ATA_16)) {
+		memcpy(srb->sense_buffer, usb_stor_sense_invalidCDB,
+		       sizeof(usb_stor_sense_invalidCDB));
+		srb->result = SAM_STAT_CHECK_CONDITION;
+		done(srb);
+		return 0;
+	}
+
+	/* enqueue the command and wake up the control thread */
+	us->srb = srb;
+	complete(&us->cmnd_ready);
+
+	return 0;
+}
+
+static DEF_SCSI_QCMD(queuecommand)
+
+/***********************************************************************
+ * Error handling functions
+ ***********************************************************************/
+
+/* Command timeout and abort */
+static int command_abort_matching(struct us_data *us, struct scsi_cmnd *srb_match)
+{
+	/*
+	 * us->srb together with the TIMED_OUT, RESETTING, and ABORTING
+	 * bits are protected by the host lock.
+	 */
+	scsi_lock(us_to_host(us));
+
+	/* is there any active pending command to abort ? */
+	if (!us->srb) {
+		scsi_unlock(us_to_host(us));
+		usb_stor_dbg(us, "-- nothing to abort\n");
+		return SUCCESS;
+	}
+
+	/* Does the command match the passed srb if any ? */
+	if (srb_match && us->srb != srb_match) {
+		scsi_unlock(us_to_host(us));
+		usb_stor_dbg(us, "-- pending command mismatch\n");
+		return FAILED;
+	}
+
+	/*
+	 * Set the TIMED_OUT bit.  Also set the ABORTING bit, but only if
+	 * a device reset isn't already in progress (to avoid interfering
+	 * with the reset).  Note that we must retain the host lock while
+	 * calling usb_stor_stop_transport(); otherwise it might interfere
+	 * with an auto-reset that begins as soon as we release the lock.
+	 */
+	set_bit(US_FLIDX_TIMED_OUT, &us->dflags);
+	if (!test_bit(US_FLIDX_RESETTING, &us->dflags)) {
+		set_bit(US_FLIDX_ABORTING, &us->dflags);
+		usb_stor_stop_transport(us);
+	}
+	scsi_unlock(us_to_host(us));
+
+	/* Wait for the aborted command to finish */
+	wait_for_completion(&us->notify);
+	return SUCCESS;
+}
+
+static int command_abort(struct scsi_cmnd *srb)
+{
+	struct us_data *us = host_to_us(srb->device->host);
+
+	usb_stor_dbg(us, "%s called\n", __func__);
+	return command_abort_matching(us, srb);
+}
+
+/*
+ * This invokes the transport reset mechanism to reset the state of the
+ * device
+ */
+static int device_reset(struct scsi_cmnd *srb)
+{
+	struct us_data *us = host_to_us(srb->device->host);
+	int result;
+
+	usb_stor_dbg(us, "%s called\n", __func__);
+
+	/* abort any pending command before reset */
+	command_abort_matching(us, NULL);
+
+	/* lock the device pointers and do the reset */
+	mutex_lock(&(us->dev_mutex));
+	result = us->transport_reset(us);
+	mutex_unlock(&us->dev_mutex);
+
+	return result < 0 ? FAILED : SUCCESS;
+}
+
+/* Simulate a SCSI bus reset by resetting the device's USB port. */
+static int bus_reset(struct scsi_cmnd *srb)
+{
+	struct us_data *us = host_to_us(srb->device->host);
+	int result;
+
+	usb_stor_dbg(us, "%s called\n", __func__);
+
+	result = usb_stor_port_reset(us);
+	return result < 0 ? FAILED : SUCCESS;
+}
+
+/*
+ * Report a driver-initiated device reset to the SCSI layer.
+ * Calling this for a SCSI-initiated reset is unnecessary but harmless.
+ * The caller must own the SCSI host lock.
+ */
+void usb_stor_report_device_reset(struct us_data *us)
+{
+	int i;
+	struct Scsi_Host *host = us_to_host(us);
+
+	scsi_report_device_reset(host, 0, 0);
+	if (us->fflags & US_FL_SCM_MULT_TARG) {
+		for (i = 1; i < host->max_id; ++i)
+			scsi_report_device_reset(host, 0, i);
+	}
+}
+
+/*
+ * Report a driver-initiated bus reset to the SCSI layer.
+ * Calling this for a SCSI-initiated reset is unnecessary but harmless.
+ * The caller must not own the SCSI host lock.
+ */
+void usb_stor_report_bus_reset(struct us_data *us)
+{
+	struct Scsi_Host *host = us_to_host(us);
+
+	scsi_lock(host);
+	scsi_report_bus_reset(host, 0);
+	scsi_unlock(host);
+}
+
+/***********************************************************************
+ * /proc/scsi/ functions
+ ***********************************************************************/
+
+static int write_info(struct Scsi_Host *host, char *buffer, int length)
+{
+	/* if someone is sending us data, just throw it away */
+	return length;
+}
+
+static int show_info (struct seq_file *m, struct Scsi_Host *host)
+{
+	struct us_data *us = host_to_us(host);
+	const char *string;
+
+	/* print the controller name */
+	seq_printf(m, "   Host scsi%d: usb-storage\n", host->host_no);
+
+	/* print product, vendor, and serial number strings */
+	if (us->pusb_dev->manufacturer)
+		string = us->pusb_dev->manufacturer;
+	else if (us->unusual_dev->vendorName)
+		string = us->unusual_dev->vendorName;
+	else
+		string = "Unknown";
+	seq_printf(m, "       Vendor: %s\n", string);
+	if (us->pusb_dev->product)
+		string = us->pusb_dev->product;
+	else if (us->unusual_dev->productName)
+		string = us->unusual_dev->productName;
+	else
+		string = "Unknown";
+	seq_printf(m, "      Product: %s\n", string);
+	if (us->pusb_dev->serial)
+		string = us->pusb_dev->serial;
+	else
+		string = "None";
+	seq_printf(m, "Serial Number: %s\n", string);
+
+	/* show the protocol and transport */
+	seq_printf(m, "     Protocol: %s\n", us->protocol_name);
+	seq_printf(m, "    Transport: %s\n", us->transport_name);
+
+	/* show the device flags */
+	seq_printf(m, "       Quirks:");
+
+#define US_FLAG(name, value) \
+	if (us->fflags & value) seq_printf(m, " " #name);
+US_DO_ALL_FLAGS
+#undef US_FLAG
+	seq_putc(m, '\n');
+	return 0;
+}
+
+/***********************************************************************
+ * Sysfs interface
+ ***********************************************************************/
+
+/* Output routine for the sysfs max_sectors file */
+static ssize_t max_sectors_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+
+	return sprintf(buf, "%u\n", queue_max_hw_sectors(sdev->request_queue));
+}
+
+/* Input routine for the sysfs max_sectors file */
+static ssize_t max_sectors_store(struct device *dev, struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	unsigned short ms;
+
+	if (sscanf(buf, "%hu", &ms) > 0) {
+		blk_queue_max_hw_sectors(sdev->request_queue, ms);
+		return count;
+	}
+	return -EINVAL;
+}
+static DEVICE_ATTR_RW(max_sectors);
+
+static struct attribute *usb_sdev_attrs[] = {
+	&dev_attr_max_sectors.attr,
+	NULL,
+};
+
+ATTRIBUTE_GROUPS(usb_sdev);
+
+/*
+ * this defines our host template, with which we'll allocate hosts
+ */
+
+static const struct scsi_host_template usb_stor_host_template = {
+	/* basic userland interface stuff */
+	.name =				"usb-storage",
+	.proc_name =			"usb-storage",
+	.show_info =			show_info,
+	.write_info =			write_info,
+	.info =				host_info,
+
+	/* command interface -- queued only */
+	.queuecommand =			queuecommand,
+
+	/* error and abort handlers */
+	.eh_abort_handler =		command_abort,
+	.eh_device_reset_handler =	device_reset,
+	.eh_bus_reset_handler =		bus_reset,
+
+	/* queue commands only, only one command per LUN */
+	.can_queue =			1,
+
+	/* unknown initiator id */
+	.this_id =			-1,
+
+	.slave_alloc =			slave_alloc,
+	.slave_configure =		slave_configure,
+	.target_alloc =			target_alloc,
+
+	/* lots of sg segments can be handled */
+	.sg_tablesize =			SG_MAX_SEGMENTS,
+
+
+	/*
+	 * Limit the total size of a transfer to 120 KB.
+	 *
+	 * Some devices are known to choke with anything larger. It seems like
+	 * the problem stems from the fact that original IDE controllers had
+	 * only an 8-bit register to hold the number of sectors in one transfer
+	 * and even those couldn't handle a full 256 sectors.
+	 *
+	 * Because we want to make sure we interoperate with as many devices as
+	 * possible, we will maintain a 240 sector transfer size limit for USB
+	 * Mass Storage devices.
+	 *
+	 * Tests show that other operating have similar limits with Microsoft
+	 * Windows 7 limiting transfers to 128 sectors for both USB2 and USB3
+	 * and Apple Mac OS X 10.11 limiting transfers to 256 sectors for USB2
+	 * and 2048 for USB3 devices.
+	 */
+	.max_sectors =                  240,
+
+	/* emulated HBA */
+	.emulated =			1,
+
+	/* we do our own delay after a device or bus reset */
+	.skip_settle_delay =		1,
+
+	/* sysfs device attributes */
+	.sdev_groups =			usb_sdev_groups,
+
+	/* module management */
+	.module =			THIS_MODULE
+};
+
+void usb_stor_host_template_init(struct scsi_host_template *sht,
+				 const char *name, struct module *owner)
+{
+	*sht = usb_stor_host_template;
+	sht->name = name;
+	sht->proc_name = name;
+	sht->module = owner;
+}
+EXPORT_SYMBOL_GPL(usb_stor_host_template_init);
+
+/* To Report "Illegal Request: Invalid Field in CDB */
+unsigned char usb_stor_sense_invalidCDB[18] = {
+	[0]	= 0x70,			    /* current error */
+	[2]	= ILLEGAL_REQUEST,	    /* Illegal Request = 0x05 */
+	[7]	= 0x0a,			    /* additional length */
+	[12]	= 0x24			    /* Invalid Field in CDB */
+};
+EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB);
diff --git a/drivers/usb/storage/scsiglue.h b/drivers/usb/storage/scsiglue.h
new file mode 100644
index 000000000..2a79c3ed4
--- /dev/null
+++ b/drivers/usb/storage/scsiglue.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Driver for USB Mass Storage compliant devices
+ * SCSI Connecting Glue Header File
+ *
+ * Current development and maintenance by:
+ *   (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices.  Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document.  The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ */
+
+#ifndef _SCSIGLUE_H_
+#define _SCSIGLUE_H_
+
+extern void usb_stor_report_device_reset(struct us_data *us);
+extern void usb_stor_report_bus_reset(struct us_data *us);
+extern void usb_stor_host_template_init(struct scsi_host_template *sht,
+					const char *name, struct module *owner);
+
+extern unsigned char usb_stor_sense_invalidCDB[18];
+
+#endif
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
new file mode 100644
index 000000000..51bcd4a43
--- /dev/null
+++ b/drivers/usb/storage/sddr09.c
@@ -0,0 +1,1790 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for SanDisk SDDR-09 SmartMedia reader
+ *
+ *   (c) 2000, 2001 Robert Baruch (autophile@starband.net)
+ *   (c) 2002 Andries Brouwer (aeb@cwi.nl)
+ * Developed with the assistance of:
+ *   (c) 2002 Alan Stern <stern@rowland.org>
+ *
+ * The SanDisk SDDR-09 SmartMedia reader uses the Shuttle EUSB-01 chip.
+ * This chip is a programmable USB controller. In the SDDR-09, it has
+ * been programmed to obey a certain limited set of SCSI commands.
+ * This driver translates the "real" SCSI commands to the SDDR-09 SCSI
+ * commands.
+ */
+
+/*
+ * Known vendor commands: 12 bytes, first byte is opcode
+ *
+ * E7: read scatter gather
+ * E8: read
+ * E9: write
+ * EA: erase
+ * EB: reset
+ * EC: read status
+ * ED: read ID
+ * EE: write CIS (?)
+ * EF: compute checksum (?)
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "scsiglue.h"
+
+#define DRV_NAME "ums-sddr09"
+
+MODULE_DESCRIPTION("Driver for SanDisk SDDR-09 SmartMedia reader");
+MODULE_AUTHOR("Andries Brouwer <aeb@cwi.nl>, Robert Baruch <autophile@starband.net>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(USB_STORAGE);
+
+static int usb_stor_sddr09_dpcm_init(struct us_data *us);
+static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us);
+static int usb_stor_sddr09_init(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+static struct usb_device_id sddr09_usb_ids[] = {
+#	include "unusual_sddr09.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, sddr09_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev sddr09_unusual_dev_list[] = {
+#	include "unusual_sddr09.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
+#define LSB_of(s) ((s)&0xFF)
+#define MSB_of(s) ((s)>>8)
+
+/*
+ * First some stuff that does not belong here:
+ * data on SmartMedia and other cards, completely
+ * unrelated to this driver.
+ * Similar stuff occurs in <linux/mtd/nand_ids.h>.
+ */
+
+struct nand_flash_dev {
+	int model_id;
+	int chipshift;		/* 1<<cs bytes total capacity */
+	char pageshift;		/* 1<<ps bytes in a page */
+	char blockshift;	/* 1<<bs pages in an erase block */
+	char zoneshift;		/* 1<<zs blocks in a zone */
+				/* # of logical blocks is 125/128 of this */
+	char pageadrlen;	/* length of an address in bytes - 1 */
+};
+
+/*
+ * NAND Flash Manufacturer ID Codes
+ */
+#define NAND_MFR_AMD		0x01
+#define NAND_MFR_NATSEMI	0x8f
+#define NAND_MFR_TOSHIBA	0x98
+#define NAND_MFR_SAMSUNG	0xec
+
+static inline char *nand_flash_manufacturer(int manuf_id) {
+	switch(manuf_id) {
+	case NAND_MFR_AMD:
+		return "AMD";
+	case NAND_MFR_NATSEMI:
+		return "NATSEMI";
+	case NAND_MFR_TOSHIBA:
+		return "Toshiba";
+	case NAND_MFR_SAMSUNG:
+		return "Samsung";
+	default:
+		return "unknown";
+	}
+}
+
+/*
+ * It looks like it is unnecessary to attach manufacturer to the
+ * remaining data: SSFDC prescribes manufacturer-independent id codes.
+ *
+ * 256 MB NAND flash has a 5-byte ID with 2nd byte 0xaa, 0xba, 0xca or 0xda.
+ */
+
+static struct nand_flash_dev nand_flash_ids[] = {
+	/* NAND flash */
+	{ 0x6e, 20, 8, 4, 8, 2},	/* 1 MB */
+	{ 0xe8, 20, 8, 4, 8, 2},	/* 1 MB */
+	{ 0xec, 20, 8, 4, 8, 2},	/* 1 MB */
+	{ 0x64, 21, 8, 4, 9, 2}, 	/* 2 MB */
+	{ 0xea, 21, 8, 4, 9, 2},	/* 2 MB */
+	{ 0x6b, 22, 9, 4, 9, 2},	/* 4 MB */
+	{ 0xe3, 22, 9, 4, 9, 2},	/* 4 MB */
+	{ 0xe5, 22, 9, 4, 9, 2},	/* 4 MB */
+	{ 0xe6, 23, 9, 4, 10, 2},	/* 8 MB */
+	{ 0x73, 24, 9, 5, 10, 2},	/* 16 MB */
+	{ 0x75, 25, 9, 5, 10, 2},	/* 32 MB */
+	{ 0x76, 26, 9, 5, 10, 3},	/* 64 MB */
+	{ 0x79, 27, 9, 5, 10, 3},	/* 128 MB */
+
+	/* MASK ROM */
+	{ 0x5d, 21, 9, 4, 8, 2},	/* 2 MB */
+	{ 0xd5, 22, 9, 4, 9, 2},	/* 4 MB */
+	{ 0xd6, 23, 9, 4, 10, 2},	/* 8 MB */
+	{ 0x57, 24, 9, 4, 11, 2},	/* 16 MB */
+	{ 0x58, 25, 9, 4, 12, 2},	/* 32 MB */
+	{ 0,}
+};
+
+static struct nand_flash_dev *
+nand_find_id(unsigned char id) {
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(nand_flash_ids); i++)
+		if (nand_flash_ids[i].model_id == id)
+			return &(nand_flash_ids[i]);
+	return NULL;
+}
+
+/*
+ * ECC computation.
+ */
+static unsigned char parity[256];
+static unsigned char ecc2[256];
+
+static void nand_init_ecc(void) {
+	int i, j, a;
+
+	parity[0] = 0;
+	for (i = 1; i < 256; i++)
+		parity[i] = (parity[i&(i-1)] ^ 1);
+
+	for (i = 0; i < 256; i++) {
+		a = 0;
+		for (j = 0; j < 8; j++) {
+			if (i & (1<<j)) {
+				if ((j & 1) == 0)
+					a ^= 0x04;
+				if ((j & 2) == 0)
+					a ^= 0x10;
+				if ((j & 4) == 0)
+					a ^= 0x40;
+			}
+		}
+		ecc2[i] = ~(a ^ (a<<1) ^ (parity[i] ? 0xa8 : 0));
+	}
+}
+
+/* compute 3-byte ecc on 256 bytes */
+static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) {
+	int i, j, a;
+	unsigned char par = 0, bit, bits[8] = {0};
+
+	/* collect 16 checksum bits */
+	for (i = 0; i < 256; i++) {
+		par ^= data[i];
+		bit = parity[data[i]];
+		for (j = 0; j < 8; j++)
+			if ((i & (1<<j)) == 0)
+				bits[j] ^= bit;
+	}
+
+	/* put 4+4+4 = 12 bits in the ecc */
+	a = (bits[3] << 6) + (bits[2] << 4) + (bits[1] << 2) + bits[0];
+	ecc[0] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
+
+	a = (bits[7] << 6) + (bits[6] << 4) + (bits[5] << 2) + bits[4];
+	ecc[1] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
+
+	ecc[2] = ecc2[par];
+}
+
+static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) {
+	return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]);
+}
+
+static void nand_store_ecc(unsigned char *data, unsigned char *ecc) {
+	memcpy(data, ecc, 3);
+}
+
+/*
+ * The actual driver starts here.
+ */
+
+struct sddr09_card_info {
+	unsigned long	capacity;	/* Size of card in bytes */
+	int		pagesize;	/* Size of page in bytes */
+	int		pageshift;	/* log2 of pagesize */
+	int		blocksize;	/* Size of block in pages */
+	int		blockshift;	/* log2 of blocksize */
+	int		blockmask;	/* 2^blockshift - 1 */
+	int		*lba_to_pba;	/* logical to physical map */
+	int		*pba_to_lba;	/* physical to logical map */
+	int		lbact;		/* number of available pages */
+	int		flags;
+#define	SDDR09_WP	1		/* write protected */
+};
+
+/*
+ * On my 16MB card, control blocks have size 64 (16 real control bytes,
+ * and 48 junk bytes). In reality of course the card uses 16 control bytes,
+ * so the reader makes up the remaining 48. Don't know whether these numbers
+ * depend on the card. For now a constant.
+ */
+#define CONTROL_SHIFT 6
+
+/*
+ * On my Combo CF/SM reader, the SM reader has LUN 1.
+ * (and things fail with LUN 0).
+ * It seems LUN is irrelevant for others.
+ */
+#define LUN	1
+#define	LUNBITS	(LUN << 5)
+
+/*
+ * LBA and PBA are unsigned ints. Special values.
+ */
+#define UNDEF    0xffffffff
+#define SPARE    0xfffffffe
+#define UNUSABLE 0xfffffffd
+
+static const int erase_bad_lba_entries = 0;
+
+/* send vendor interface command (0x41) */
+/* called for requests 0, 1, 8 */
+static int
+sddr09_send_command(struct us_data *us,
+		    unsigned char request,
+		    unsigned char direction,
+		    unsigned char *xfer_data,
+		    unsigned int xfer_len) {
+	unsigned int pipe;
+	unsigned char requesttype = (0x41 | direction);
+	int rc;
+
+	// Get the receive or send control pipe number
+
+	if (direction == USB_DIR_IN)
+		pipe = us->recv_ctrl_pipe;
+	else
+		pipe = us->send_ctrl_pipe;
+
+	rc = usb_stor_ctrl_transfer(us, pipe, request, requesttype,
+				   0, 0, xfer_data, xfer_len);
+	switch (rc) {
+		case USB_STOR_XFER_GOOD:	return 0;
+		case USB_STOR_XFER_STALLED:	return -EPIPE;
+		default:			return -EIO;
+	}
+}
+
+static int
+sddr09_send_scsi_command(struct us_data *us,
+			 unsigned char *command,
+			 unsigned int command_len) {
+	return sddr09_send_command(us, 0, USB_DIR_OUT, command, command_len);
+}
+
+#if 0
+/*
+ * Test Unit Ready Command: 12 bytes.
+ * byte 0: opcode: 00
+ */
+static int
+sddr09_test_unit_ready(struct us_data *us) {
+	unsigned char *command = us->iobuf;
+	int result;
+
+	memset(command, 0, 6);
+	command[1] = LUNBITS;
+
+	result = sddr09_send_scsi_command(us, command, 6);
+
+	usb_stor_dbg(us, "sddr09_test_unit_ready returns %d\n", result);
+
+	return result;
+}
+#endif
+
+/*
+ * Request Sense Command: 12 bytes.
+ * byte 0: opcode: 03
+ * byte 4: data length
+ */
+static int
+sddr09_request_sense(struct us_data *us, unsigned char *sensebuf, int buflen) {
+	unsigned char *command = us->iobuf;
+	int result;
+
+	memset(command, 0, 12);
+	command[0] = 0x03;
+	command[1] = LUNBITS;
+	command[4] = buflen;
+
+	result = sddr09_send_scsi_command(us, command, 12);
+	if (result)
+		return result;
+
+	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+			sensebuf, buflen, NULL);
+	return (result == USB_STOR_XFER_GOOD ? 0 : -EIO);
+}
+
+/*
+ * Read Command: 12 bytes.
+ * byte 0: opcode: E8
+ * byte 1: last two bits: 00: read data, 01: read blockwise control,
+ *			10: read both, 11: read pagewise control.
+ *	 It turns out we need values 20, 21, 22, 23 here (LUN 1).
+ * bytes 2-5: address (interpretation depends on byte 1, see below)
+ * bytes 10-11: count (idem)
+ *
+ * A page has 512 data bytes and 64 control bytes (16 control and 48 junk).
+ * A read data command gets data in 512-byte pages.
+ * A read control command gets control in 64-byte chunks.
+ * A read both command gets data+control in 576-byte chunks.
+ *
+ * Blocks are groups of 32 pages, and read blockwise control jumps to the
+ * next block, while read pagewise control jumps to the next page after
+ * reading a group of 64 control bytes.
+ * [Here 512 = 1<<pageshift, 32 = 1<<blockshift, 64 is constant?]
+ *
+ * (1 MB and 2 MB cards are a bit different, but I have only a 16 MB card.)
+ */
+
+static int
+sddr09_readX(struct us_data *us, int x, unsigned long fromaddress,
+	     int nr_of_pages, int bulklen, unsigned char *buf,
+	     int use_sg) {
+
+	unsigned char *command = us->iobuf;
+	int result;
+
+	command[0] = 0xE8;
+	command[1] = LUNBITS | x;
+	command[2] = MSB_of(fromaddress>>16);
+	command[3] = LSB_of(fromaddress>>16); 
+	command[4] = MSB_of(fromaddress & 0xFFFF);
+	command[5] = LSB_of(fromaddress & 0xFFFF); 
+	command[6] = 0;
+	command[7] = 0;
+	command[8] = 0;
+	command[9] = 0;
+	command[10] = MSB_of(nr_of_pages);
+	command[11] = LSB_of(nr_of_pages);
+
+	result = sddr09_send_scsi_command(us, command, 12);
+
+	if (result) {
+		usb_stor_dbg(us, "Result for send_control in sddr09_read2%d %d\n",
+			     x, result);
+		return result;
+	}
+
+	result = usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe,
+				       buf, bulklen, use_sg, NULL);
+
+	if (result != USB_STOR_XFER_GOOD) {
+		usb_stor_dbg(us, "Result for bulk_transfer in sddr09_read2%d %d\n",
+			     x, result);
+		return -EIO;
+	}
+	return 0;
+}
+
+/*
+ * Read Data
+ *
+ * fromaddress counts data shorts:
+ * increasing it by 256 shifts the bytestream by 512 bytes;
+ * the last 8 bits are ignored.
+ *
+ * nr_of_pages counts pages of size (1 << pageshift).
+ */
+static int
+sddr09_read20(struct us_data *us, unsigned long fromaddress,
+	      int nr_of_pages, int pageshift, unsigned char *buf, int use_sg) {
+	int bulklen = nr_of_pages << pageshift;
+
+	/* The last 8 bits of fromaddress are ignored. */
+	return sddr09_readX(us, 0, fromaddress, nr_of_pages, bulklen,
+			    buf, use_sg);
+}
+
+/*
+ * Read Blockwise Control
+ *
+ * fromaddress gives the starting position (as in read data;
+ * the last 8 bits are ignored); increasing it by 32*256 shifts
+ * the output stream by 64 bytes.
+ *
+ * count counts control groups of size (1 << controlshift).
+ * For me, controlshift = 6. Is this constant?
+ *
+ * After getting one control group, jump to the next block
+ * (fromaddress += 8192).
+ */
+static int
+sddr09_read21(struct us_data *us, unsigned long fromaddress,
+	      int count, int controlshift, unsigned char *buf, int use_sg) {
+
+	int bulklen = (count << controlshift);
+	return sddr09_readX(us, 1, fromaddress, count, bulklen,
+			    buf, use_sg);
+}
+
+/*
+ * Read both Data and Control
+ *
+ * fromaddress counts data shorts, ignoring control:
+ * increasing it by 256 shifts the bytestream by 576 = 512+64 bytes;
+ * the last 8 bits are ignored.
+ *
+ * nr_of_pages counts pages of size (1 << pageshift) + (1 << controlshift).
+ */
+static int
+sddr09_read22(struct us_data *us, unsigned long fromaddress,
+	      int nr_of_pages, int pageshift, unsigned char *buf, int use_sg) {
+
+	int bulklen = (nr_of_pages << pageshift) + (nr_of_pages << CONTROL_SHIFT);
+	usb_stor_dbg(us, "reading %d pages, %d bytes\n", nr_of_pages, bulklen);
+	return sddr09_readX(us, 2, fromaddress, nr_of_pages, bulklen,
+			    buf, use_sg);
+}
+
+#if 0
+/*
+ * Read Pagewise Control
+ *
+ * fromaddress gives the starting position (as in read data;
+ * the last 8 bits are ignored); increasing it by 256 shifts
+ * the output stream by 64 bytes.
+ *
+ * count counts control groups of size (1 << controlshift).
+ * For me, controlshift = 6. Is this constant?
+ *
+ * After getting one control group, jump to the next page
+ * (fromaddress += 256).
+ */
+static int
+sddr09_read23(struct us_data *us, unsigned long fromaddress,
+	      int count, int controlshift, unsigned char *buf, int use_sg) {
+
+	int bulklen = (count << controlshift);
+	return sddr09_readX(us, 3, fromaddress, count, bulklen,
+			    buf, use_sg);
+}
+#endif
+
+/*
+ * Erase Command: 12 bytes.
+ * byte 0: opcode: EA
+ * bytes 6-9: erase address (big-endian, counting shorts, sector aligned).
+ * 
+ * Always precisely one block is erased; bytes 2-5 and 10-11 are ignored.
+ * The byte address being erased is 2*Eaddress.
+ * The CIS cannot be erased.
+ */
+static int
+sddr09_erase(struct us_data *us, unsigned long Eaddress) {
+	unsigned char *command = us->iobuf;
+	int result;
+
+	usb_stor_dbg(us, "erase address %lu\n", Eaddress);
+
+	memset(command, 0, 12);
+	command[0] = 0xEA;
+	command[1] = LUNBITS;
+	command[6] = MSB_of(Eaddress>>16);
+	command[7] = LSB_of(Eaddress>>16);
+	command[8] = MSB_of(Eaddress & 0xFFFF);
+	command[9] = LSB_of(Eaddress & 0xFFFF);
+
+	result = sddr09_send_scsi_command(us, command, 12);
+
+	if (result)
+		usb_stor_dbg(us, "Result for send_control in sddr09_erase %d\n",
+			     result);
+
+	return result;
+}
+
+/*
+ * Write CIS Command: 12 bytes.
+ * byte 0: opcode: EE
+ * bytes 2-5: write address in shorts
+ * bytes 10-11: sector count
+ *
+ * This writes at the indicated address. Don't know how it differs
+ * from E9. Maybe it does not erase? However, it will also write to
+ * the CIS.
+ *
+ * When two such commands on the same page follow each other directly,
+ * the second one is not done.
+ */
+
+/*
+ * Write Command: 12 bytes.
+ * byte 0: opcode: E9
+ * bytes 2-5: write address (big-endian, counting shorts, sector aligned).
+ * bytes 6-9: erase address (big-endian, counting shorts, sector aligned).
+ * bytes 10-11: sector count (big-endian, in 512-byte sectors).
+ *
+ * If write address equals erase address, the erase is done first,
+ * otherwise the write is done first. When erase address equals zero
+ * no erase is done?
+ */
+static int
+sddr09_writeX(struct us_data *us,
+	      unsigned long Waddress, unsigned long Eaddress,
+	      int nr_of_pages, int bulklen, unsigned char *buf, int use_sg) {
+
+	unsigned char *command = us->iobuf;
+	int result;
+
+	command[0] = 0xE9;
+	command[1] = LUNBITS;
+
+	command[2] = MSB_of(Waddress>>16);
+	command[3] = LSB_of(Waddress>>16);
+	command[4] = MSB_of(Waddress & 0xFFFF);
+	command[5] = LSB_of(Waddress & 0xFFFF);
+
+	command[6] = MSB_of(Eaddress>>16);
+	command[7] = LSB_of(Eaddress>>16);
+	command[8] = MSB_of(Eaddress & 0xFFFF);
+	command[9] = LSB_of(Eaddress & 0xFFFF);
+
+	command[10] = MSB_of(nr_of_pages);
+	command[11] = LSB_of(nr_of_pages);
+
+	result = sddr09_send_scsi_command(us, command, 12);
+
+	if (result) {
+		usb_stor_dbg(us, "Result for send_control in sddr09_writeX %d\n",
+			     result);
+		return result;
+	}
+
+	result = usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe,
+				       buf, bulklen, use_sg, NULL);
+
+	if (result != USB_STOR_XFER_GOOD) {
+		usb_stor_dbg(us, "Result for bulk_transfer in sddr09_writeX %d\n",
+			     result);
+		return -EIO;
+	}
+	return 0;
+}
+
+/* erase address, write same address */
+static int
+sddr09_write_inplace(struct us_data *us, unsigned long address,
+		     int nr_of_pages, int pageshift, unsigned char *buf,
+		     int use_sg) {
+	int bulklen = (nr_of_pages << pageshift) + (nr_of_pages << CONTROL_SHIFT);
+	return sddr09_writeX(us, address, address, nr_of_pages, bulklen,
+			     buf, use_sg);
+}
+
+#if 0
+/*
+ * Read Scatter Gather Command: 3+4n bytes.
+ * byte 0: opcode E7
+ * byte 2: n
+ * bytes 4i-1,4i,4i+1: page address
+ * byte 4i+2: page count
+ * (i=1..n)
+ *
+ * This reads several pages from the card to a single memory buffer.
+ * The last two bits of byte 1 have the same meaning as for E8.
+ */
+static int
+sddr09_read_sg_test_only(struct us_data *us) {
+	unsigned char *command = us->iobuf;
+	int result, bulklen, nsg, ct;
+	unsigned char *buf;
+	unsigned long address;
+
+	nsg = bulklen = 0;
+	command[0] = 0xE7;
+	command[1] = LUNBITS;
+	command[2] = 0;
+	address = 040000; ct = 1;
+	nsg++;
+	bulklen += (ct << 9);
+	command[4*nsg+2] = ct;
+	command[4*nsg+1] = ((address >> 9) & 0xFF);
+	command[4*nsg+0] = ((address >> 17) & 0xFF);
+	command[4*nsg-1] = ((address >> 25) & 0xFF);
+
+	address = 0340000; ct = 1;
+	nsg++;
+	bulklen += (ct << 9);
+	command[4*nsg+2] = ct;
+	command[4*nsg+1] = ((address >> 9) & 0xFF);
+	command[4*nsg+0] = ((address >> 17) & 0xFF);
+	command[4*nsg-1] = ((address >> 25) & 0xFF);
+
+	address = 01000000; ct = 2;
+	nsg++;
+	bulklen += (ct << 9);
+	command[4*nsg+2] = ct;
+	command[4*nsg+1] = ((address >> 9) & 0xFF);
+	command[4*nsg+0] = ((address >> 17) & 0xFF);
+	command[4*nsg-1] = ((address >> 25) & 0xFF);
+
+	command[2] = nsg;
+
+	result = sddr09_send_scsi_command(us, command, 4*nsg+3);
+
+	if (result) {
+		usb_stor_dbg(us, "Result for send_control in sddr09_read_sg %d\n",
+			     result);
+		return result;
+	}
+
+	buf = kmalloc(bulklen, GFP_NOIO);
+	if (!buf)
+		return -ENOMEM;
+
+	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+				       buf, bulklen, NULL);
+	kfree(buf);
+	if (result != USB_STOR_XFER_GOOD) {
+		usb_stor_dbg(us, "Result for bulk_transfer in sddr09_read_sg %d\n",
+			     result);
+		return -EIO;
+	}
+
+	return 0;
+}
+#endif
+
+/*
+ * Read Status Command: 12 bytes.
+ * byte 0: opcode: EC
+ *
+ * Returns 64 bytes, all zero except for the first.
+ * bit 0: 1: Error
+ * bit 5: 1: Suspended
+ * bit 6: 1: Ready
+ * bit 7: 1: Not write-protected
+ */
+
+static int
+sddr09_read_status(struct us_data *us, unsigned char *status) {
+
+	unsigned char *command = us->iobuf;
+	unsigned char *data = us->iobuf;
+	int result;
+
+	usb_stor_dbg(us, "Reading status...\n");
+
+	memset(command, 0, 12);
+	command[0] = 0xEC;
+	command[1] = LUNBITS;
+
+	result = sddr09_send_scsi_command(us, command, 12);
+	if (result)
+		return result;
+
+	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+				       data, 64, NULL);
+	*status = data[0];
+	return (result == USB_STOR_XFER_GOOD ? 0 : -EIO);
+}
+
+static int
+sddr09_read_data(struct us_data *us,
+		 unsigned long address,
+		 unsigned int sectors) {
+
+	struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra;
+	unsigned char *buffer;
+	unsigned int lba, maxlba, pba;
+	unsigned int page, pages;
+	unsigned int len, offset;
+	struct scatterlist *sg;
+	int result;
+
+	// Figure out the initial LBA and page
+	lba = address >> info->blockshift;
+	page = (address & info->blockmask);
+	maxlba = info->capacity >> (info->pageshift + info->blockshift);
+	if (lba >= maxlba)
+		return -EIO;
+
+	// Since we only read in one block at a time, we have to create
+	// a bounce buffer and move the data a piece at a time between the
+	// bounce buffer and the actual transfer buffer.
+
+	len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
+	buffer = kmalloc(len, GFP_NOIO);
+	if (!buffer)
+		return -ENOMEM;
+
+	// This could be made much more efficient by checking for
+	// contiguous LBA's. Another exercise left to the student.
+
+	result = 0;
+	offset = 0;
+	sg = NULL;
+
+	while (sectors > 0) {
+
+		/* Find number of pages we can read in this block */
+		pages = min(sectors, info->blocksize - page);
+		len = pages << info->pageshift;
+
+		/* Not overflowing capacity? */
+		if (lba >= maxlba) {
+			usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n",
+				     lba, maxlba);
+			result = -EIO;
+			break;
+		}
+
+		/* Find where this lba lives on disk */
+		pba = info->lba_to_pba[lba];
+
+		if (pba == UNDEF) {	/* this lba was never written */
+
+			usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n",
+				     pages, lba, page);
+
+			/*
+			 * This is not really an error. It just means
+			 * that the block has never been written.
+			 * Instead of returning an error
+			 * it is better to return all zero data.
+			 */
+
+			memset(buffer, 0, len);
+
+		} else {
+			usb_stor_dbg(us, "Read %d pages, from PBA %d (LBA %d) page %d\n",
+				     pages, pba, lba, page);
+
+			address = ((pba << info->blockshift) + page) << 
+				info->pageshift;
+
+			result = sddr09_read20(us, address>>1,
+					pages, info->pageshift, buffer, 0);
+			if (result)
+				break;
+		}
+
+		// Store the data in the transfer buffer
+		usb_stor_access_xfer_buf(buffer, len, us->srb,
+				&sg, &offset, TO_XFER_BUF);
+
+		page = 0;
+		lba++;
+		sectors -= pages;
+	}
+
+	kfree(buffer);
+	return result;
+}
+
+static unsigned int
+sddr09_find_unused_pba(struct sddr09_card_info *info, unsigned int lba) {
+	static unsigned int lastpba = 1;
+	int zonestart, end, i;
+
+	zonestart = (lba/1000) << 10;
+	end = info->capacity >> (info->blockshift + info->pageshift);
+	end -= zonestart;
+	if (end > 1024)
+		end = 1024;
+
+	for (i = lastpba+1; i < end; i++) {
+		if (info->pba_to_lba[zonestart+i] == UNDEF) {
+			lastpba = i;
+			return zonestart+i;
+		}
+	}
+	for (i = 0; i <= lastpba; i++) {
+		if (info->pba_to_lba[zonestart+i] == UNDEF) {
+			lastpba = i;
+			return zonestart+i;
+		}
+	}
+	return 0;
+}
+
+static int
+sddr09_write_lba(struct us_data *us, unsigned int lba,
+		 unsigned int page, unsigned int pages,
+		 unsigned char *ptr, unsigned char *blockbuffer) {
+
+	struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra;
+	unsigned long address;
+	unsigned int pba, lbap;
+	unsigned int pagelen;
+	unsigned char *bptr, *cptr, *xptr;
+	unsigned char ecc[3];
+	int i, result;
+
+	lbap = ((lba % 1000) << 1) | 0x1000;
+	if (parity[MSB_of(lbap) ^ LSB_of(lbap)])
+		lbap ^= 1;
+	pba = info->lba_to_pba[lba];
+
+	if (pba == UNDEF) {
+		pba = sddr09_find_unused_pba(info, lba);
+		if (!pba) {
+			printk(KERN_WARNING
+			       "sddr09_write_lba: Out of unused blocks\n");
+			return -ENOSPC;
+		}
+		info->pba_to_lba[pba] = lba;
+		info->lba_to_pba[lba] = pba;
+	}
+
+	if (pba == 1) {
+		/*
+		 * Maybe it is impossible to write to PBA 1.
+		 * Fake success, but don't do anything.
+		 */
+		printk(KERN_WARNING "sddr09: avoid writing to pba 1\n");
+		return 0;
+	}
+
+	pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT);
+
+	/* read old contents */
+	address = (pba << (info->pageshift + info->blockshift));
+	result = sddr09_read22(us, address>>1, info->blocksize,
+			       info->pageshift, blockbuffer, 0);
+	if (result)
+		return result;
+
+	/* check old contents and fill lba */
+	for (i = 0; i < info->blocksize; i++) {
+		bptr = blockbuffer + i*pagelen;
+		cptr = bptr + info->pagesize;
+		nand_compute_ecc(bptr, ecc);
+		if (!nand_compare_ecc(cptr+13, ecc)) {
+			usb_stor_dbg(us, "Warning: bad ecc in page %d- of pba %d\n",
+				     i, pba);
+			nand_store_ecc(cptr+13, ecc);
+		}
+		nand_compute_ecc(bptr+(info->pagesize / 2), ecc);
+		if (!nand_compare_ecc(cptr+8, ecc)) {
+			usb_stor_dbg(us, "Warning: bad ecc in page %d+ of pba %d\n",
+				     i, pba);
+			nand_store_ecc(cptr+8, ecc);
+		}
+		cptr[6] = cptr[11] = MSB_of(lbap);
+		cptr[7] = cptr[12] = LSB_of(lbap);
+	}
+
+	/* copy in new stuff and compute ECC */
+	xptr = ptr;
+	for (i = page; i < page+pages; i++) {
+		bptr = blockbuffer + i*pagelen;
+		cptr = bptr + info->pagesize;
+		memcpy(bptr, xptr, info->pagesize);
+		xptr += info->pagesize;
+		nand_compute_ecc(bptr, ecc);
+		nand_store_ecc(cptr+13, ecc);
+		nand_compute_ecc(bptr+(info->pagesize / 2), ecc);
+		nand_store_ecc(cptr+8, ecc);
+	}
+
+	usb_stor_dbg(us, "Rewrite PBA %d (LBA %d)\n", pba, lba);
+
+	result = sddr09_write_inplace(us, address>>1, info->blocksize,
+				      info->pageshift, blockbuffer, 0);
+
+	usb_stor_dbg(us, "sddr09_write_inplace returns %d\n", result);
+
+#if 0
+	{
+		unsigned char status = 0;
+		int result2 = sddr09_read_status(us, &status);
+		if (result2)
+			usb_stor_dbg(us, "cannot read status\n");
+		else if (status != 0xc0)
+			usb_stor_dbg(us, "status after write: 0x%x\n", status);
+	}
+#endif
+
+#if 0
+	{
+		int result2 = sddr09_test_unit_ready(us);
+	}
+#endif
+
+	return result;
+}
+
+static int
+sddr09_write_data(struct us_data *us,
+		  unsigned long address,
+		  unsigned int sectors) {
+
+	struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra;
+	unsigned int lba, maxlba, page, pages;
+	unsigned int pagelen, blocklen;
+	unsigned char *blockbuffer;
+	unsigned char *buffer;
+	unsigned int len, offset;
+	struct scatterlist *sg;
+	int result;
+
+	/* Figure out the initial LBA and page */
+	lba = address >> info->blockshift;
+	page = (address & info->blockmask);
+	maxlba = info->capacity >> (info->pageshift + info->blockshift);
+	if (lba >= maxlba)
+		return -EIO;
+
+	/*
+	 * blockbuffer is used for reading in the old data, overwriting
+	 * with the new data, and performing ECC calculations
+	 */
+
+	/*
+	 * TODO: instead of doing kmalloc/kfree for each write,
+	 * add a bufferpointer to the info structure
+	 */
+
+	pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT);
+	blocklen = (pagelen << info->blockshift);
+	blockbuffer = kmalloc(blocklen, GFP_NOIO);
+	if (!blockbuffer)
+		return -ENOMEM;
+
+	/*
+	 * Since we don't write the user data directly to the device,
+	 * we have to create a bounce buffer and move the data a piece
+	 * at a time between the bounce buffer and the actual transfer buffer.
+	 */
+
+	len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
+	buffer = kmalloc(len, GFP_NOIO);
+	if (!buffer) {
+		kfree(blockbuffer);
+		return -ENOMEM;
+	}
+
+	result = 0;
+	offset = 0;
+	sg = NULL;
+
+	while (sectors > 0) {
+
+		/* Write as many sectors as possible in this block */
+
+		pages = min(sectors, info->blocksize - page);
+		len = (pages << info->pageshift);
+
+		/* Not overflowing capacity? */
+		if (lba >= maxlba) {
+			usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n",
+				     lba, maxlba);
+			result = -EIO;
+			break;
+		}
+
+		/* Get the data from the transfer buffer */
+		usb_stor_access_xfer_buf(buffer, len, us->srb,
+				&sg, &offset, FROM_XFER_BUF);
+
+		result = sddr09_write_lba(us, lba, page, pages,
+				buffer, blockbuffer);
+		if (result)
+			break;
+
+		page = 0;
+		lba++;
+		sectors -= pages;
+	}
+
+	kfree(buffer);
+	kfree(blockbuffer);
+
+	return result;
+}
+
+static int
+sddr09_read_control(struct us_data *us,
+		unsigned long address,
+		unsigned int blocks,
+		unsigned char *content,
+		int use_sg) {
+
+	usb_stor_dbg(us, "Read control address %lu, blocks %d\n",
+		     address, blocks);
+
+	return sddr09_read21(us, address, blocks,
+			     CONTROL_SHIFT, content, use_sg);
+}
+
+/*
+ * Read Device ID Command: 12 bytes.
+ * byte 0: opcode: ED
+ *
+ * Returns 2 bytes: Manufacturer ID and Device ID.
+ * On more recent cards 3 bytes: the third byte is an option code A5
+ * signifying that the secret command to read an 128-bit ID is available.
+ * On still more recent cards 4 bytes: the fourth byte C0 means that
+ * a second read ID cmd is available.
+ */
+static int
+sddr09_read_deviceID(struct us_data *us, unsigned char *deviceID) {
+	unsigned char *command = us->iobuf;
+	unsigned char *content = us->iobuf;
+	int result, i;
+
+	memset(command, 0, 12);
+	command[0] = 0xED;
+	command[1] = LUNBITS;
+
+	result = sddr09_send_scsi_command(us, command, 12);
+	if (result)
+		return result;
+
+	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+			content, 64, NULL);
+
+	for (i = 0; i < 4; i++)
+		deviceID[i] = content[i];
+
+	return (result == USB_STOR_XFER_GOOD ? 0 : -EIO);
+}
+
+static int
+sddr09_get_wp(struct us_data *us, struct sddr09_card_info *info) {
+	int result;
+	unsigned char status;
+	const char *wp_fmt;
+
+	result = sddr09_read_status(us, &status);
+	if (result) {
+		usb_stor_dbg(us, "read_status fails\n");
+		return result;
+	}
+	if ((status & 0x80) == 0) {
+		info->flags |= SDDR09_WP;	/* write protected */
+		wp_fmt = " WP";
+	} else {
+		wp_fmt = "";
+	}
+	usb_stor_dbg(us, "status 0x%02X%s%s%s%s\n", status, wp_fmt,
+		     status & 0x40 ? " Ready" : "",
+		     status & LUNBITS ? " Suspended" : "",
+		     status & 0x01 ? " Error" : "");
+
+	return 0;
+}
+
+#if 0
+/*
+ * Reset Command: 12 bytes.
+ * byte 0: opcode: EB
+ */
+static int
+sddr09_reset(struct us_data *us) {
+
+	unsigned char *command = us->iobuf;
+
+	memset(command, 0, 12);
+	command[0] = 0xEB;
+	command[1] = LUNBITS;
+
+	return sddr09_send_scsi_command(us, command, 12);
+}
+#endif
+
+static struct nand_flash_dev *
+sddr09_get_cardinfo(struct us_data *us, unsigned char flags) {
+	struct nand_flash_dev *cardinfo;
+	unsigned char deviceID[4];
+	char blurbtxt[256];
+	int result;
+
+	usb_stor_dbg(us, "Reading capacity...\n");
+
+	result = sddr09_read_deviceID(us, deviceID);
+
+	if (result) {
+		usb_stor_dbg(us, "Result of read_deviceID is %d\n", result);
+		printk(KERN_WARNING "sddr09: could not read card info\n");
+		return NULL;
+	}
+
+	sprintf(blurbtxt, "sddr09: Found Flash card, ID = %4ph", deviceID);
+
+	/* Byte 0 is the manufacturer */
+	sprintf(blurbtxt + strlen(blurbtxt),
+		": Manuf. %s",
+		nand_flash_manufacturer(deviceID[0]));
+
+	/* Byte 1 is the device type */
+	cardinfo = nand_find_id(deviceID[1]);
+	if (cardinfo) {
+		/*
+		 * MB or MiB? It is neither. A 16 MB card has
+		 * 17301504 raw bytes, of which 16384000 are
+		 * usable for user data.
+		 */
+		sprintf(blurbtxt + strlen(blurbtxt),
+			", %d MB", 1<<(cardinfo->chipshift - 20));
+	} else {
+		sprintf(blurbtxt + strlen(blurbtxt),
+			", type unrecognized");
+	}
+
+	/* Byte 2 is code to signal availability of 128-bit ID */
+	if (deviceID[2] == 0xa5) {
+		sprintf(blurbtxt + strlen(blurbtxt),
+			", 128-bit ID");
+	}
+
+	/* Byte 3 announces the availability of another read ID command */
+	if (deviceID[3] == 0xc0) {
+		sprintf(blurbtxt + strlen(blurbtxt),
+			", extra cmd");
+	}
+
+	if (flags & SDDR09_WP)
+		sprintf(blurbtxt + strlen(blurbtxt),
+			", WP");
+
+	printk(KERN_WARNING "%s\n", blurbtxt);
+
+	return cardinfo;
+}
+
+static int
+sddr09_read_map(struct us_data *us) {
+
+	struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra;
+	int numblocks, alloc_len, alloc_blocks;
+	int i, j, result;
+	unsigned char *buffer, *buffer_end, *ptr;
+	unsigned int lba, lbact;
+
+	if (!info->capacity)
+		return -1;
+
+	/*
+	 * size of a block is 1 << (blockshift + pageshift) bytes
+	 * divide into the total capacity to get the number of blocks
+	 */
+
+	numblocks = info->capacity >> (info->blockshift + info->pageshift);
+
+	/*
+	 * read 64 bytes for every block (actually 1 << CONTROL_SHIFT)
+	 * but only use a 64 KB buffer
+	 * buffer size used must be a multiple of (1 << CONTROL_SHIFT)
+	 */
+#define SDDR09_READ_MAP_BUFSZ 65536
+
+	alloc_blocks = min(numblocks, SDDR09_READ_MAP_BUFSZ >> CONTROL_SHIFT);
+	alloc_len = (alloc_blocks << CONTROL_SHIFT);
+	buffer = kmalloc(alloc_len, GFP_NOIO);
+	if (!buffer) {
+		result = -1;
+		goto done;
+	}
+	buffer_end = buffer + alloc_len;
+
+#undef SDDR09_READ_MAP_BUFSZ
+
+	kfree(info->lba_to_pba);
+	kfree(info->pba_to_lba);
+	info->lba_to_pba = kmalloc_array(numblocks, sizeof(int), GFP_NOIO);
+	info->pba_to_lba = kmalloc_array(numblocks, sizeof(int), GFP_NOIO);
+
+	if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) {
+		printk(KERN_WARNING "sddr09_read_map: out of memory\n");
+		result = -1;
+		goto done;
+	}
+
+	for (i = 0; i < numblocks; i++)
+		info->lba_to_pba[i] = info->pba_to_lba[i] = UNDEF;
+
+	/*
+	 * Define lba-pba translation table
+	 */
+
+	ptr = buffer_end;
+	for (i = 0; i < numblocks; i++) {
+		ptr += (1 << CONTROL_SHIFT);
+		if (ptr >= buffer_end) {
+			unsigned long address;
+
+			address = i << (info->pageshift + info->blockshift);
+			result = sddr09_read_control(
+				us, address>>1,
+				min(alloc_blocks, numblocks - i),
+				buffer, 0);
+			if (result) {
+				result = -1;
+				goto done;
+			}
+			ptr = buffer;
+		}
+
+		if (i == 0 || i == 1) {
+			info->pba_to_lba[i] = UNUSABLE;
+			continue;
+		}
+
+		/* special PBAs have control field 0^16 */
+		for (j = 0; j < 16; j++)
+			if (ptr[j] != 0)
+				goto nonz;
+		info->pba_to_lba[i] = UNUSABLE;
+		printk(KERN_WARNING "sddr09: PBA %d has no logical mapping\n",
+		       i);
+		continue;
+
+	nonz:
+		/* unwritten PBAs have control field FF^16 */
+		for (j = 0; j < 16; j++)
+			if (ptr[j] != 0xff)
+				goto nonff;
+		continue;
+
+	nonff:
+		/* normal PBAs start with six FFs */
+		if (j < 6) {
+			printk(KERN_WARNING
+			       "sddr09: PBA %d has no logical mapping: "
+			       "reserved area = %02X%02X%02X%02X "
+			       "data status %02X block status %02X\n",
+			       i, ptr[0], ptr[1], ptr[2], ptr[3],
+			       ptr[4], ptr[5]);
+			info->pba_to_lba[i] = UNUSABLE;
+			continue;
+		}
+
+		if ((ptr[6] >> 4) != 0x01) {
+			printk(KERN_WARNING
+			       "sddr09: PBA %d has invalid address field "
+			       "%02X%02X/%02X%02X\n",
+			       i, ptr[6], ptr[7], ptr[11], ptr[12]);
+			info->pba_to_lba[i] = UNUSABLE;
+			continue;
+		}
+
+		/* check even parity */
+		if (parity[ptr[6] ^ ptr[7]]) {
+			printk(KERN_WARNING
+			       "sddr09: Bad parity in LBA for block %d"
+			       " (%02X %02X)\n", i, ptr[6], ptr[7]);
+			info->pba_to_lba[i] = UNUSABLE;
+			continue;
+		}
+
+		lba = short_pack(ptr[7], ptr[6]);
+		lba = (lba & 0x07FF) >> 1;
+
+		/*
+		 * Every 1024 physical blocks ("zone"), the LBA numbers
+		 * go back to zero, but are within a higher block of LBA's.
+		 * Also, there is a maximum of 1000 LBA's per zone.
+		 * In other words, in PBA 1024-2047 you will find LBA 0-999
+		 * which are really LBA 1000-1999. This allows for 24 bad
+		 * or special physical blocks per zone.
+		 */
+
+		if (lba >= 1000) {
+			printk(KERN_WARNING
+			       "sddr09: Bad low LBA %d for block %d\n",
+			       lba, i);
+			goto possibly_erase;
+		}
+
+		lba += 1000*(i/0x400);
+
+		if (info->lba_to_pba[lba] != UNDEF) {
+			printk(KERN_WARNING
+			       "sddr09: LBA %d seen for PBA %d and %d\n",
+			       lba, info->lba_to_pba[lba], i);
+			goto possibly_erase;
+		}
+
+		info->pba_to_lba[i] = lba;
+		info->lba_to_pba[lba] = i;
+		continue;
+
+	possibly_erase:
+		if (erase_bad_lba_entries) {
+			unsigned long address;
+
+			address = (i << (info->pageshift + info->blockshift));
+			sddr09_erase(us, address>>1);
+			info->pba_to_lba[i] = UNDEF;
+		} else
+			info->pba_to_lba[i] = UNUSABLE;
+	}
+
+	/*
+	 * Approximate capacity. This is not entirely correct yet,
+	 * since a zone with less than 1000 usable pages leads to
+	 * missing LBAs. Especially if it is the last zone, some
+	 * LBAs can be past capacity.
+	 */
+	lbact = 0;
+	for (i = 0; i < numblocks; i += 1024) {
+		int ct = 0;
+
+		for (j = 0; j < 1024 && i+j < numblocks; j++) {
+			if (info->pba_to_lba[i+j] != UNUSABLE) {
+				if (ct >= 1000)
+					info->pba_to_lba[i+j] = SPARE;
+				else
+					ct++;
+			}
+		}
+		lbact += ct;
+	}
+	info->lbact = lbact;
+	usb_stor_dbg(us, "Found %d LBA's\n", lbact);
+	result = 0;
+
+ done:
+	if (result != 0) {
+		kfree(info->lba_to_pba);
+		kfree(info->pba_to_lba);
+		info->lba_to_pba = NULL;
+		info->pba_to_lba = NULL;
+	}
+	kfree(buffer);
+	return result;
+}
+
+static void
+sddr09_card_info_destructor(void *extra) {
+	struct sddr09_card_info *info = (struct sddr09_card_info *)extra;
+
+	if (!info)
+		return;
+
+	kfree(info->lba_to_pba);
+	kfree(info->pba_to_lba);
+}
+
+static int
+sddr09_common_init(struct us_data *us) {
+	int result;
+
+	/* set the configuration -- STALL is an acceptable response here */
+	if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) {
+		usb_stor_dbg(us, "active config #%d != 1 ??\n",
+			     us->pusb_dev->actconfig->desc.bConfigurationValue);
+		return -EINVAL;
+	}
+
+	result = usb_reset_configuration(us->pusb_dev);
+	usb_stor_dbg(us, "Result of usb_reset_configuration is %d\n", result);
+	if (result == -EPIPE) {
+		usb_stor_dbg(us, "-- stall on control interface\n");
+	} else if (result != 0) {
+		/* it's not a stall, but another error -- time to bail */
+		usb_stor_dbg(us, "-- Unknown error.  Rejecting device\n");
+		return -EINVAL;
+	}
+
+	us->extra = kzalloc(sizeof(struct sddr09_card_info), GFP_NOIO);
+	if (!us->extra)
+		return -ENOMEM;
+	us->extra_destructor = sddr09_card_info_destructor;
+
+	nand_init_ecc();
+	return 0;
+}
+
+
+/*
+ * This is needed at a very early stage. If this is not listed in the
+ * unusual devices list but called from here then LUN 0 of the combo reader
+ * is not recognized. But I do not know what precisely these calls do.
+ */
+static int
+usb_stor_sddr09_dpcm_init(struct us_data *us) {
+	int result;
+	unsigned char *data = us->iobuf;
+
+	result = sddr09_common_init(us);
+	if (result)
+		return result;
+
+	result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2);
+	if (result) {
+		usb_stor_dbg(us, "send_command fails\n");
+		return result;
+	}
+
+	usb_stor_dbg(us, "%02X %02X\n", data[0], data[1]);
+	// get 07 02
+
+	result = sddr09_send_command(us, 0x08, USB_DIR_IN, data, 2);
+	if (result) {
+		usb_stor_dbg(us, "2nd send_command fails\n");
+		return result;
+	}
+
+	usb_stor_dbg(us, "%02X %02X\n", data[0], data[1]);
+	// get 07 00
+
+	result = sddr09_request_sense(us, data, 18);
+	if (result == 0 && data[2] != 0) {
+		int j;
+		for (j=0; j<18; j++)
+			printk(" %02X", data[j]);
+		printk("\n");
+		// get 70 00 00 00 00 00 00 * 00 00 00 00 00 00
+		// 70: current command
+		// sense key 0, sense code 0, extd sense code 0
+		// additional transfer length * = sizeof(data) - 7
+		// Or: 70 00 06 00 00 00 00 0b 00 00 00 00 28 00 00 00 00 00
+		// sense key 06, sense code 28: unit attention,
+		// not ready to ready transition
+	}
+
+	// test unit ready
+
+	return 0;		/* not result */
+}
+
+/*
+ * Transport for the Microtech DPCM-USB
+ */
+static int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	int ret;
+
+	usb_stor_dbg(us, "LUN=%d\n", (u8)srb->device->lun);
+
+	switch (srb->device->lun) {
+	case 0:
+
+		/*
+		 * LUN 0 corresponds to the CompactFlash card reader.
+		 */
+		ret = usb_stor_CB_transport(srb, us);
+		break;
+
+	case 1:
+
+		/*
+		 * LUN 1 corresponds to the SmartMedia card reader.
+		 */
+
+		/*
+		 * Set the LUN to 0 (just in case).
+		 */
+		srb->device->lun = 0;
+		ret = sddr09_transport(srb, us);
+		srb->device->lun = 1;
+		break;
+
+	default:
+	    usb_stor_dbg(us, "Invalid LUN %d\n", (u8)srb->device->lun);
+		ret = USB_STOR_TRANSPORT_ERROR;
+		break;
+	}
+	return ret;
+}
+
+
+/*
+ * Transport for the Sandisk SDDR-09
+ */
+static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	static unsigned char sensekey = 0, sensecode = 0;
+	static unsigned char havefakesense = 0;
+	int result, i;
+	unsigned char *ptr = us->iobuf;
+	unsigned long capacity;
+	unsigned int page, pages;
+
+	struct sddr09_card_info *info;
+
+	static unsigned char inquiry_response[8] = {
+		0x00, 0x80, 0x00, 0x02, 0x1F, 0x00, 0x00, 0x00
+	};
+
+	/* note: no block descriptor support */
+	static unsigned char mode_page_01[19] = {
+		0x00, 0x0F, 0x00, 0x0, 0x0, 0x0, 0x00,
+		0x01, 0x0A,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+	};
+
+	info = (struct sddr09_card_info *)us->extra;
+
+	if (srb->cmnd[0] == REQUEST_SENSE && havefakesense) {
+		/* for a faked command, we have to follow with a faked sense */
+		memset(ptr, 0, 18);
+		ptr[0] = 0x70;
+		ptr[2] = sensekey;
+		ptr[7] = 11;
+		ptr[12] = sensecode;
+		usb_stor_set_xfer_buf(ptr, 18, srb);
+		sensekey = sensecode = havefakesense = 0;
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	havefakesense = 1;
+
+	/*
+	 * Dummy up a response for INQUIRY since SDDR09 doesn't
+	 * respond to INQUIRY commands
+	 */
+
+	if (srb->cmnd[0] == INQUIRY) {
+		memcpy(ptr, inquiry_response, 8);
+		fill_inquiry_response(us, ptr, 36);
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == READ_CAPACITY) {
+		struct nand_flash_dev *cardinfo;
+
+		sddr09_get_wp(us, info);	/* read WP bit */
+
+		cardinfo = sddr09_get_cardinfo(us, info->flags);
+		if (!cardinfo) {
+			/* probably no media */
+		init_error:
+			sensekey = 0x02;	/* not ready */
+			sensecode = 0x3a;	/* medium not present */
+			return USB_STOR_TRANSPORT_FAILED;
+		}
+
+		info->capacity = (1 << cardinfo->chipshift);
+		info->pageshift = cardinfo->pageshift;
+		info->pagesize = (1 << info->pageshift);
+		info->blockshift = cardinfo->blockshift;
+		info->blocksize = (1 << info->blockshift);
+		info->blockmask = info->blocksize - 1;
+
+		// map initialization, must follow get_cardinfo()
+		if (sddr09_read_map(us)) {
+			/* probably out of memory */
+			goto init_error;
+		}
+
+		// Report capacity
+
+		capacity = (info->lbact << info->blockshift) - 1;
+
+		((__be32 *) ptr)[0] = cpu_to_be32(capacity);
+
+		// Report page size
+
+		((__be32 *) ptr)[1] = cpu_to_be32(info->pagesize);
+		usb_stor_set_xfer_buf(ptr, 8, srb);
+
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == MODE_SENSE_10) {
+		int modepage = (srb->cmnd[2] & 0x3F);
+
+		/*
+		 * They ask for the Read/Write error recovery page,
+		 * or for all pages.
+		 */
+		/* %% We should check DBD %% */
+		if (modepage == 0x01 || modepage == 0x3F) {
+			usb_stor_dbg(us, "Dummy up request for mode page 0x%x\n",
+				     modepage);
+
+			memcpy(ptr, mode_page_01, sizeof(mode_page_01));
+			((__be16*)ptr)[0] = cpu_to_be16(sizeof(mode_page_01) - 2);
+			ptr[3] = (info->flags & SDDR09_WP) ? 0x80 : 0;
+			usb_stor_set_xfer_buf(ptr, sizeof(mode_page_01), srb);
+			return USB_STOR_TRANSPORT_GOOD;
+		}
+
+		sensekey = 0x05;	/* illegal request */
+		sensecode = 0x24;	/* invalid field in CDB */
+		return USB_STOR_TRANSPORT_FAILED;
+	}
+
+	if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL)
+		return USB_STOR_TRANSPORT_GOOD;
+
+	havefakesense = 0;
+
+	if (srb->cmnd[0] == READ_10) {
+
+		page = short_pack(srb->cmnd[3], srb->cmnd[2]);
+		page <<= 16;
+		page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
+		pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
+
+		usb_stor_dbg(us, "READ_10: read page %d pagect %d\n",
+			     page, pages);
+
+		result = sddr09_read_data(us, page, pages);
+		return (result == 0 ? USB_STOR_TRANSPORT_GOOD :
+				USB_STOR_TRANSPORT_ERROR);
+	}
+
+	if (srb->cmnd[0] == WRITE_10) {
+
+		page = short_pack(srb->cmnd[3], srb->cmnd[2]);
+		page <<= 16;
+		page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
+		pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
+
+		usb_stor_dbg(us, "WRITE_10: write page %d pagect %d\n",
+			     page, pages);
+
+		result = sddr09_write_data(us, page, pages);
+		return (result == 0 ? USB_STOR_TRANSPORT_GOOD :
+				USB_STOR_TRANSPORT_ERROR);
+	}
+
+	/*
+	 * catch-all for all other commands, except
+	 * pass TEST_UNIT_READY and REQUEST_SENSE through
+	 */
+	if (srb->cmnd[0] != TEST_UNIT_READY &&
+	    srb->cmnd[0] != REQUEST_SENSE) {
+		sensekey = 0x05;	/* illegal request */
+		sensecode = 0x20;	/* invalid command */
+		havefakesense = 1;
+		return USB_STOR_TRANSPORT_FAILED;
+	}
+
+	for (; srb->cmd_len<12; srb->cmd_len++)
+		srb->cmnd[srb->cmd_len] = 0;
+
+	srb->cmnd[1] = LUNBITS;
+
+	ptr[0] = 0;
+	for (i=0; i<12; i++)
+		sprintf(ptr+strlen(ptr), "%02X ", srb->cmnd[i]);
+
+	usb_stor_dbg(us, "Send control for command %s\n", ptr);
+
+	result = sddr09_send_scsi_command(us, srb->cmnd, 12);
+	if (result) {
+		usb_stor_dbg(us, "sddr09_send_scsi_command returns %d\n",
+			     result);
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	if (scsi_bufflen(srb) == 0)
+		return USB_STOR_TRANSPORT_GOOD;
+
+	if (srb->sc_data_direction == DMA_TO_DEVICE ||
+	    srb->sc_data_direction == DMA_FROM_DEVICE) {
+		unsigned int pipe = (srb->sc_data_direction == DMA_TO_DEVICE)
+				? us->send_bulk_pipe : us->recv_bulk_pipe;
+
+		usb_stor_dbg(us, "%s %d bytes\n",
+			     (srb->sc_data_direction == DMA_TO_DEVICE) ?
+			     "sending" : "receiving",
+			     scsi_bufflen(srb));
+
+		result = usb_stor_bulk_srb(us, pipe, srb);
+
+		return (result == USB_STOR_XFER_GOOD ?
+			USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
+	} 
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Initialization routine for the sddr09 subdriver
+ */
+static int
+usb_stor_sddr09_init(struct us_data *us) {
+	return sddr09_common_init(us);
+}
+
+static struct scsi_host_template sddr09_host_template;
+
+static int sddr09_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - sddr09_usb_ids) + sddr09_unusual_dev_list,
+			&sddr09_host_template);
+	if (result)
+		return result;
+
+	if (us->protocol == USB_PR_DPCM_USB) {
+		us->transport_name = "Control/Bulk-EUSB/SDDR09";
+		us->transport = dpcm_transport;
+		us->transport_reset = usb_stor_CB_reset;
+		us->max_lun = 1;
+	} else {
+		us->transport_name = "EUSB/SDDR09";
+		us->transport = sddr09_transport;
+		us->transport_reset = usb_stor_CB_reset;
+		us->max_lun = 0;
+	}
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver sddr09_driver = {
+	.name =		DRV_NAME,
+	.probe =	sddr09_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	sddr09_usb_ids,
+	.soft_unbind =	1,
+	.no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(sddr09_driver, sddr09_host_template, DRV_NAME);
diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c
new file mode 100644
index 000000000..15dc25801
--- /dev/null
+++ b/drivers/usb/storage/sddr55.c
@@ -0,0 +1,1015 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for SanDisk SDDR-55 SmartMedia reader
+ *
+ * SDDR55 driver v0.1:
+ *
+ * First release
+ *
+ * Current development and maintenance by:
+ *   (c) 2002 Simon Munton
+ */
+
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "scsiglue.h"
+
+#define DRV_NAME "ums-sddr55"
+
+MODULE_DESCRIPTION("Driver for SanDisk SDDR-55 SmartMedia reader");
+MODULE_AUTHOR("Simon Munton");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(USB_STORAGE);
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+static struct usb_device_id sddr55_usb_ids[] = {
+#	include "unusual_sddr55.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, sddr55_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev sddr55_unusual_dev_list[] = {
+#	include "unusual_sddr55.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
+#define LSB_of(s) ((s)&0xFF)
+#define MSB_of(s) ((s)>>8)
+#define PAGESIZE  512
+
+#define set_sense_info(sk, asc, ascq)	\
+    do {				\
+	info->sense_data[2] = sk;	\
+	info->sense_data[12] = asc;	\
+	info->sense_data[13] = ascq;	\
+	} while (0)
+
+
+struct sddr55_card_info {
+	unsigned long	capacity;	/* Size of card in bytes */
+	int		max_log_blks;	/* maximum number of logical blocks */
+	int		pageshift;	/* log2 of pagesize */
+	int		smallpageshift;	/* 1 if pagesize == 256 */
+	int		blocksize;	/* Size of block in pages */
+	int		blockshift;	/* log2 of blocksize */
+	int		blockmask;	/* 2^blockshift - 1 */
+	int		read_only;	/* non zero if card is write protected */
+	int		force_read_only;	/* non zero if we find a map error*/
+	int		*lba_to_pba;	/* logical to physical map */
+	int		*pba_to_lba;	/* physical to logical map */
+	int		fatal_error;	/* set if we detect something nasty */
+	unsigned long 	last_access;	/* number of jiffies since we last talked to device */
+	unsigned char   sense_data[18];
+};
+
+
+#define NOT_ALLOCATED		0xffffffff
+#define BAD_BLOCK		0xffff
+#define CIS_BLOCK		0x400
+#define UNUSED_BLOCK		0x3ff
+
+static int
+sddr55_bulk_transport(struct us_data *us, int direction,
+		      unsigned char *data, unsigned int len) {
+	struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
+	unsigned int pipe = (direction == DMA_FROM_DEVICE) ?
+			us->recv_bulk_pipe : us->send_bulk_pipe;
+
+	if (!len)
+		return USB_STOR_XFER_GOOD;
+	info->last_access = jiffies;
+	return usb_stor_bulk_transfer_buf(us, pipe, data, len, NULL);
+}
+
+/*
+ * check if card inserted, if there is, update read_only status
+ * return non zero if no card
+ */
+
+static int sddr55_status(struct us_data *us)
+{
+	int result;
+	unsigned char *command = us->iobuf;
+	unsigned char *status = us->iobuf;
+	struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
+
+	/* send command */
+	memset(command, 0, 8);
+	command[5] = 0xB0;
+	command[7] = 0x80;
+	result = sddr55_bulk_transport(us,
+		DMA_TO_DEVICE, command, 8);
+
+	usb_stor_dbg(us, "Result for send_command in status %d\n", result);
+
+	if (result != USB_STOR_XFER_GOOD) {
+		set_sense_info (4, 0, 0);	/* hardware error */
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	result = sddr55_bulk_transport(us,
+		DMA_FROM_DEVICE, status,	4);
+
+	/* expect to get short transfer if no card fitted */
+	if (result == USB_STOR_XFER_SHORT || result == USB_STOR_XFER_STALLED) {
+		/* had a short transfer, no card inserted, free map memory */
+		kfree(info->lba_to_pba);
+		kfree(info->pba_to_lba);
+		info->lba_to_pba = NULL;
+		info->pba_to_lba = NULL;
+
+		info->fatal_error = 0;
+		info->force_read_only = 0;
+
+		set_sense_info (2, 0x3a, 0);	/* not ready, medium not present */
+		return USB_STOR_TRANSPORT_FAILED;
+	}
+
+	if (result != USB_STOR_XFER_GOOD) {
+		set_sense_info (4, 0, 0);	/* hardware error */
+		return USB_STOR_TRANSPORT_FAILED;
+	}
+	
+	/* check write protect status */
+	info->read_only = (status[0] & 0x20);
+
+	/* now read status */
+	result = sddr55_bulk_transport(us,
+		DMA_FROM_DEVICE, status,	2);
+
+	if (result != USB_STOR_XFER_GOOD) {
+		set_sense_info (4, 0, 0);	/* hardware error */
+	}
+
+	return (result == USB_STOR_XFER_GOOD ?
+			USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_FAILED);
+}
+
+
+static int sddr55_read_data(struct us_data *us,
+		unsigned int lba,
+		unsigned int page,
+		unsigned short sectors) {
+
+	int result = USB_STOR_TRANSPORT_GOOD;
+	unsigned char *command = us->iobuf;
+	unsigned char *status = us->iobuf;
+	struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
+	unsigned char *buffer;
+
+	unsigned int pba;
+	unsigned long address;
+
+	unsigned short pages;
+	unsigned int len, offset;
+	struct scatterlist *sg;
+
+	// Since we only read in one block at a time, we have to create
+	// a bounce buffer and move the data a piece at a time between the
+	// bounce buffer and the actual transfer buffer.
+
+	len = min((unsigned int) sectors, (unsigned int) info->blocksize >>
+			info->smallpageshift) * PAGESIZE;
+	buffer = kmalloc(len, GFP_NOIO);
+	if (buffer == NULL)
+		return USB_STOR_TRANSPORT_ERROR; /* out of memory */
+	offset = 0;
+	sg = NULL;
+
+	while (sectors>0) {
+
+		/* have we got to end? */
+		if (lba >= info->max_log_blks)
+			break;
+
+		pba = info->lba_to_pba[lba];
+
+		// Read as many sectors as possible in this block
+
+		pages = min((unsigned int) sectors << info->smallpageshift,
+				info->blocksize - page);
+		len = pages << info->pageshift;
+
+		usb_stor_dbg(us, "Read %02X pages, from PBA %04X (LBA %04X) page %02X\n",
+			     pages, pba, lba, page);
+
+		if (pba == NOT_ALLOCATED) {
+			/* no pba for this lba, fill with zeroes */
+			memset (buffer, 0, len);
+		} else {
+
+			address = (pba << info->blockshift) + page;
+
+			command[0] = 0;
+			command[1] = LSB_of(address>>16);
+			command[2] = LSB_of(address>>8);
+			command[3] = LSB_of(address);
+
+			command[4] = 0;
+			command[5] = 0xB0;
+			command[6] = LSB_of(pages << (1 - info->smallpageshift));
+			command[7] = 0x85;
+
+			/* send command */
+			result = sddr55_bulk_transport(us,
+				DMA_TO_DEVICE, command, 8);
+
+			usb_stor_dbg(us, "Result for send_command in read_data %d\n",
+				     result);
+
+			if (result != USB_STOR_XFER_GOOD) {
+				result = USB_STOR_TRANSPORT_ERROR;
+				goto leave;
+			}
+
+			/* read data */
+			result = sddr55_bulk_transport(us,
+				DMA_FROM_DEVICE, buffer, len);
+
+			if (result != USB_STOR_XFER_GOOD) {
+				result = USB_STOR_TRANSPORT_ERROR;
+				goto leave;
+			}
+
+			/* now read status */
+			result = sddr55_bulk_transport(us,
+				DMA_FROM_DEVICE, status, 2);
+
+			if (result != USB_STOR_XFER_GOOD) {
+				result = USB_STOR_TRANSPORT_ERROR;
+				goto leave;
+			}
+
+			/* check status for error */
+			if (status[0] == 0xff && status[1] == 0x4) {
+				set_sense_info (3, 0x11, 0);
+				result = USB_STOR_TRANSPORT_FAILED;
+				goto leave;
+			}
+		}
+
+		// Store the data in the transfer buffer
+		usb_stor_access_xfer_buf(buffer, len, us->srb,
+				&sg, &offset, TO_XFER_BUF);
+
+		page = 0;
+		lba++;
+		sectors -= pages >> info->smallpageshift;
+	}
+
+	result = USB_STOR_TRANSPORT_GOOD;
+
+leave:
+	kfree(buffer);
+
+	return result;
+}
+
+static int sddr55_write_data(struct us_data *us,
+		unsigned int lba,
+		unsigned int page,
+		unsigned short sectors) {
+
+	int result = USB_STOR_TRANSPORT_GOOD;
+	unsigned char *command = us->iobuf;
+	unsigned char *status = us->iobuf;
+	struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
+	unsigned char *buffer;
+
+	unsigned int pba;
+	unsigned int new_pba;
+	unsigned long address;
+
+	unsigned short pages;
+	int i;
+	unsigned int len, offset;
+	struct scatterlist *sg;
+
+	/* check if we are allowed to write */
+	if (info->read_only || info->force_read_only) {
+		set_sense_info (7, 0x27, 0);	/* read only */
+		return USB_STOR_TRANSPORT_FAILED;
+	}
+
+	// Since we only write one block at a time, we have to create
+	// a bounce buffer and move the data a piece at a time between the
+	// bounce buffer and the actual transfer buffer.
+
+	len = min((unsigned int) sectors, (unsigned int) info->blocksize >>
+			info->smallpageshift) * PAGESIZE;
+	buffer = kmalloc(len, GFP_NOIO);
+	if (buffer == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+	offset = 0;
+	sg = NULL;
+
+	while (sectors > 0) {
+
+		/* have we got to end? */
+		if (lba >= info->max_log_blks)
+			break;
+
+		pba = info->lba_to_pba[lba];
+
+		// Write as many sectors as possible in this block
+
+		pages = min((unsigned int) sectors << info->smallpageshift,
+				info->blocksize - page);
+		len = pages << info->pageshift;
+
+		// Get the data from the transfer buffer
+		usb_stor_access_xfer_buf(buffer, len, us->srb,
+				&sg, &offset, FROM_XFER_BUF);
+
+		usb_stor_dbg(us, "Write %02X pages, to PBA %04X (LBA %04X) page %02X\n",
+			     pages, pba, lba, page);
+			
+		command[4] = 0;
+
+		if (pba == NOT_ALLOCATED) {
+			/* no pba allocated for this lba, find a free pba to use */
+
+			int max_pba = (info->max_log_blks / 250 ) * 256;
+			int found_count = 0;
+			int found_pba = -1;
+
+			/* set pba to first block in zone lba is in */
+			pba = (lba / 1000) * 1024;
+
+			usb_stor_dbg(us, "No PBA for LBA %04X\n", lba);
+
+			if (max_pba > 1024)
+				max_pba = 1024;
+
+			/*
+			 * Scan through the map looking for an unused block
+			 * leave 16 unused blocks at start (or as many as
+			 * possible) since the sddr55 seems to reuse a used
+			 * block when it shouldn't if we don't leave space.
+			 */
+			for (i = 0; i < max_pba; i++, pba++) {
+				if (info->pba_to_lba[pba] == UNUSED_BLOCK) {
+					found_pba = pba;
+					if (found_count++ > 16)
+						break;
+				}
+			}
+
+			pba = found_pba;
+
+			if (pba == -1) {
+				/* oh dear */
+				usb_stor_dbg(us, "Couldn't find unallocated block\n");
+
+				set_sense_info (3, 0x31, 0);	/* medium error */
+				result = USB_STOR_TRANSPORT_FAILED;
+				goto leave;
+			}
+
+			usb_stor_dbg(us, "Allocating PBA %04X for LBA %04X\n",
+				     pba, lba);
+
+			/* set writing to unallocated block flag */
+			command[4] = 0x40;
+		}
+
+		address = (pba << info->blockshift) + page;
+
+		command[1] = LSB_of(address>>16);
+		command[2] = LSB_of(address>>8); 
+		command[3] = LSB_of(address);
+
+		/* set the lba into the command, modulo 1000 */
+		command[0] = LSB_of(lba % 1000);
+		command[6] = MSB_of(lba % 1000);
+
+		command[4] |= LSB_of(pages >> info->smallpageshift);
+		command[5] = 0xB0;
+		command[7] = 0x86;
+
+		/* send command */
+		result = sddr55_bulk_transport(us,
+			DMA_TO_DEVICE, command, 8);
+
+		if (result != USB_STOR_XFER_GOOD) {
+			usb_stor_dbg(us, "Result for send_command in write_data %d\n",
+				     result);
+
+			/* set_sense_info is superfluous here? */
+			set_sense_info (3, 0x3, 0);/* peripheral write error */
+			result = USB_STOR_TRANSPORT_FAILED;
+			goto leave;
+		}
+
+		/* send the data */
+		result = sddr55_bulk_transport(us,
+			DMA_TO_DEVICE, buffer, len);
+
+		if (result != USB_STOR_XFER_GOOD) {
+			usb_stor_dbg(us, "Result for send_data in write_data %d\n",
+				     result);
+
+			/* set_sense_info is superfluous here? */
+			set_sense_info (3, 0x3, 0);/* peripheral write error */
+			result = USB_STOR_TRANSPORT_FAILED;
+			goto leave;
+		}
+
+		/* now read status */
+		result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, status, 6);
+
+		if (result != USB_STOR_XFER_GOOD) {
+			usb_stor_dbg(us, "Result for get_status in write_data %d\n",
+				     result);
+
+			/* set_sense_info is superfluous here? */
+			set_sense_info (3, 0x3, 0);/* peripheral write error */
+			result = USB_STOR_TRANSPORT_FAILED;
+			goto leave;
+		}
+
+		new_pba = (status[3] + (status[4] << 8) + (status[5] << 16))
+						  >> info->blockshift;
+
+		/* check status for error */
+		if (status[0] == 0xff && status[1] == 0x4) {
+			info->pba_to_lba[new_pba] = BAD_BLOCK;
+
+			set_sense_info (3, 0x0c, 0);
+			result = USB_STOR_TRANSPORT_FAILED;
+			goto leave;
+		}
+
+		usb_stor_dbg(us, "Updating maps for LBA %04X: old PBA %04X, new PBA %04X\n",
+			     lba, pba, new_pba);
+
+		/* update the lba<->pba maps, note new_pba might be the same as pba */
+		info->lba_to_pba[lba] = new_pba;
+		info->pba_to_lba[pba] = UNUSED_BLOCK;
+
+		/* check that new_pba wasn't already being used */
+		if (info->pba_to_lba[new_pba] != UNUSED_BLOCK) {
+			printk(KERN_ERR "sddr55 error: new PBA %04X already in use for LBA %04X\n",
+				new_pba, info->pba_to_lba[new_pba]);
+			info->fatal_error = 1;
+			set_sense_info (3, 0x31, 0);
+			result = USB_STOR_TRANSPORT_FAILED;
+			goto leave;
+		}
+
+		/* update the pba<->lba maps for new_pba */
+		info->pba_to_lba[new_pba] = lba % 1000;
+
+		page = 0;
+		lba++;
+		sectors -= pages >> info->smallpageshift;
+	}
+	result = USB_STOR_TRANSPORT_GOOD;
+
+ leave:
+	kfree(buffer);
+	return result;
+}
+
+static int sddr55_read_deviceID(struct us_data *us,
+		unsigned char *manufacturerID,
+		unsigned char *deviceID) {
+
+	int result;
+	unsigned char *command = us->iobuf;
+	unsigned char *content = us->iobuf;
+
+	memset(command, 0, 8);
+	command[5] = 0xB0;
+	command[7] = 0x84;
+	result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8);
+
+	usb_stor_dbg(us, "Result of send_control for device ID is %d\n",
+		     result);
+
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	result = sddr55_bulk_transport(us,
+		DMA_FROM_DEVICE, content, 4);
+
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	*manufacturerID = content[0];
+	*deviceID = content[1];
+
+	if (content[0] != 0xff)	{
+    		result = sddr55_bulk_transport(us,
+			DMA_FROM_DEVICE, content, 2);
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+
+static int sddr55_reset(struct us_data *us)
+{
+	return 0;
+}
+
+
+static unsigned long sddr55_get_capacity(struct us_data *us) {
+
+	unsigned char manufacturerID;
+	unsigned char deviceID;
+	int result;
+	struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
+
+	usb_stor_dbg(us, "Reading capacity...\n");
+
+	result = sddr55_read_deviceID(us,
+		&manufacturerID,
+		&deviceID);
+
+	usb_stor_dbg(us, "Result of read_deviceID is %d\n", result);
+
+	if (result != USB_STOR_XFER_GOOD)
+		return 0;
+
+	usb_stor_dbg(us, "Device ID = %02X\n", deviceID);
+	usb_stor_dbg(us, "Manuf  ID = %02X\n", manufacturerID);
+
+	info->pageshift = 9;
+	info->smallpageshift = 0;
+	info->blocksize = 16;
+	info->blockshift = 4;
+	info->blockmask = 15;
+
+	switch (deviceID) {
+
+	case 0x6e: // 1MB
+	case 0xe8:
+	case 0xec:
+		info->pageshift = 8;
+		info->smallpageshift = 1;
+		return 0x00100000;
+
+	case 0xea: // 2MB
+	case 0x64:
+		info->pageshift = 8;
+		info->smallpageshift = 1;
+		fallthrough;
+	case 0x5d: // 5d is a ROM card with pagesize 512.
+		return 0x00200000;
+
+	case 0xe3: // 4MB
+	case 0xe5:
+	case 0x6b:
+	case 0xd5:
+		return 0x00400000;
+
+	case 0xe6: // 8MB
+	case 0xd6:
+		return 0x00800000;
+
+	case 0x73: // 16MB
+		info->blocksize = 32;
+		info->blockshift = 5;
+		info->blockmask = 31;
+		return 0x01000000;
+
+	case 0x75: // 32MB
+		info->blocksize = 32;
+		info->blockshift = 5;
+		info->blockmask = 31;
+		return 0x02000000;
+
+	case 0x76: // 64MB
+		info->blocksize = 32;
+		info->blockshift = 5;
+		info->blockmask = 31;
+		return 0x04000000;
+
+	case 0x79: // 128MB
+		info->blocksize = 32;
+		info->blockshift = 5;
+		info->blockmask = 31;
+		return 0x08000000;
+
+	default: // unknown
+		return 0;
+
+	}
+}
+
+static int sddr55_read_map(struct us_data *us) {
+
+	struct sddr55_card_info *info = (struct sddr55_card_info *)(us->extra);
+	int numblocks;
+	unsigned char *buffer;
+	unsigned char *command = us->iobuf;
+	int i;
+	unsigned short lba;
+	unsigned short max_lba;
+	int result;
+
+	if (!info->capacity)
+		return -1;
+
+	numblocks = info->capacity >> (info->blockshift + info->pageshift);
+	
+	buffer = kmalloc_array(numblocks, 2, GFP_NOIO );
+	
+	if (!buffer)
+		return -1;
+
+	memset(command, 0, 8);
+	command[5] = 0xB0;
+	command[6] = numblocks * 2 / 256;
+	command[7] = 0x8A;
+
+	result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8);
+
+	if ( result != USB_STOR_XFER_GOOD) {
+		kfree (buffer);
+		return -1;
+	}
+
+	result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, buffer, numblocks * 2);
+
+	if ( result != USB_STOR_XFER_GOOD) {
+		kfree (buffer);
+		return -1;
+	}
+
+	result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, command, 2);
+
+	if ( result != USB_STOR_XFER_GOOD) {
+		kfree (buffer);
+		return -1;
+	}
+
+	kfree(info->lba_to_pba);
+	kfree(info->pba_to_lba);
+	info->lba_to_pba = kmalloc_array(numblocks, sizeof(int), GFP_NOIO);
+	info->pba_to_lba = kmalloc_array(numblocks, sizeof(int), GFP_NOIO);
+
+	if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) {
+		kfree(info->lba_to_pba);
+		kfree(info->pba_to_lba);
+		info->lba_to_pba = NULL;
+		info->pba_to_lba = NULL;
+		kfree(buffer);
+		return -1;
+	}
+
+	memset(info->lba_to_pba, 0xff, numblocks*sizeof(int));
+	memset(info->pba_to_lba, 0xff, numblocks*sizeof(int));
+
+	/* set maximum lba */
+	max_lba = info->max_log_blks;
+	if (max_lba > 1000)
+		max_lba = 1000;
+
+	/*
+	 * Each block is 64 bytes of control data, so block i is located in
+	 * scatterlist block i*64/128k = i*(2^6)*(2^-17) = i*(2^-11)
+	 */
+
+	for (i=0; i<numblocks; i++) {
+		int zone = i / 1024;
+
+		lba = short_pack(buffer[i * 2], buffer[i * 2 + 1]);
+
+			/*
+			 * Every 1024 physical blocks ("zone"), the LBA numbers
+			 * go back to zero, but are within a higher
+			 * block of LBA's. Also, there is a maximum of
+			 * 1000 LBA's per zone. In other words, in PBA
+			 * 1024-2047 you will find LBA 0-999 which are
+			 * really LBA 1000-1999. Yes, this wastes 24
+			 * physical blocks per zone. Go figure. 
+			 * These devices can have blocks go bad, so there
+			 * are 24 spare blocks to use when blocks do go bad.
+			 */
+
+			/*
+			 * SDDR55 returns 0xffff for a bad block, and 0x400 for the 
+			 * CIS block. (Is this true for cards 8MB or less??)
+			 * Record these in the physical to logical map
+			 */ 
+
+		info->pba_to_lba[i] = lba;
+
+		if (lba >= max_lba) {
+			continue;
+		}
+		
+		if (info->lba_to_pba[lba + zone * 1000] != NOT_ALLOCATED &&
+		    !info->force_read_only) {
+			printk(KERN_WARNING
+			       "sddr55: map inconsistency at LBA %04X\n",
+			       lba + zone * 1000);
+			info->force_read_only = 1;
+		}
+
+		if (lba<0x10 || (lba>=0x3E0 && lba<0x3EF))
+			usb_stor_dbg(us, "LBA %04X <-> PBA %04X\n", lba, i);
+
+		info->lba_to_pba[lba + zone * 1000] = i;
+	}
+
+	kfree(buffer);
+	return 0;
+}
+
+
+static void sddr55_card_info_destructor(void *extra) {
+	struct sddr55_card_info *info = (struct sddr55_card_info *)extra;
+
+	if (!extra)
+		return;
+
+	kfree(info->lba_to_pba);
+	kfree(info->pba_to_lba);
+}
+
+
+/*
+ * Transport for the Sandisk SDDR-55
+ */
+static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	int result;
+	static unsigned char inquiry_response[8] = {
+		0x00, 0x80, 0x00, 0x02, 0x1F, 0x00, 0x00, 0x00
+	};
+ 	// write-protected for now, no block descriptor support
+	static unsigned char mode_page_01[20] = {
+		0x0, 0x12, 0x00, 0x80, 0x0, 0x0, 0x0, 0x0,
+		0x01, 0x0A,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+	};
+	unsigned char *ptr = us->iobuf;
+	unsigned long capacity;
+	unsigned int lba;
+	unsigned int pba;
+	unsigned int page;
+	unsigned short pages;
+	struct sddr55_card_info *info;
+
+	if (!us->extra) {
+		us->extra = kzalloc(
+			sizeof(struct sddr55_card_info), GFP_NOIO);
+		if (!us->extra)
+			return USB_STOR_TRANSPORT_ERROR;
+		us->extra_destructor = sddr55_card_info_destructor;
+	}
+
+	info = (struct sddr55_card_info *)(us->extra);
+
+	if (srb->cmnd[0] == REQUEST_SENSE) {
+		usb_stor_dbg(us, "request sense %02x/%02x/%02x\n",
+			     info->sense_data[2],
+			     info->sense_data[12],
+			     info->sense_data[13]);
+
+		memcpy (ptr, info->sense_data, sizeof info->sense_data);
+		ptr[0] = 0x70;
+		ptr[7] = 11;
+		usb_stor_set_xfer_buf (ptr, sizeof info->sense_data, srb);
+		memset (info->sense_data, 0, sizeof info->sense_data);
+
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	memset (info->sense_data, 0, sizeof info->sense_data);
+
+	/*
+	 * Dummy up a response for INQUIRY since SDDR55 doesn't
+	 * respond to INQUIRY commands
+	 */
+
+	if (srb->cmnd[0] == INQUIRY) {
+		memcpy(ptr, inquiry_response, 8);
+		fill_inquiry_response(us, ptr, 36);
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	/*
+	 * only check card status if the map isn't allocated, ie no card seen yet
+	 * or if it's been over half a second since we last accessed it
+	 */
+	if (info->lba_to_pba == NULL || time_after(jiffies, info->last_access + HZ/2)) {
+
+		/* check to see if a card is fitted */
+		result = sddr55_status (us);
+		if (result) {
+			result = sddr55_status (us);
+			if (!result) {
+			set_sense_info (6, 0x28, 0);	/* new media, set unit attention, not ready to ready */
+			}
+			return USB_STOR_TRANSPORT_FAILED;
+		}
+	}
+
+	/*
+	 * if we detected a problem with the map when writing,
+	 * don't allow any more access
+	 */
+	if (info->fatal_error) {
+
+		set_sense_info (3, 0x31, 0);
+		return USB_STOR_TRANSPORT_FAILED;
+	}
+
+	if (srb->cmnd[0] == READ_CAPACITY) {
+
+		capacity = sddr55_get_capacity(us);
+
+		if (!capacity) {
+			set_sense_info (3, 0x30, 0); /* incompatible medium */
+			return USB_STOR_TRANSPORT_FAILED;
+		}
+
+		info->capacity = capacity;
+
+		/*
+		 * figure out the maximum logical block number, allowing for
+		 * the fact that only 250 out of every 256 are used
+		 */
+		info->max_log_blks = ((info->capacity >> (info->pageshift + info->blockshift)) / 256) * 250;
+
+		/*
+		 * Last page in the card, adjust as we only use 250 out of
+		 * every 256 pages
+		 */
+		capacity = (capacity / 256) * 250;
+
+		capacity /= PAGESIZE;
+		capacity--;
+
+		((__be32 *) ptr)[0] = cpu_to_be32(capacity);
+		((__be32 *) ptr)[1] = cpu_to_be32(PAGESIZE);
+		usb_stor_set_xfer_buf(ptr, 8, srb);
+
+		sddr55_read_map(us);
+
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == MODE_SENSE_10) {
+
+		memcpy(ptr, mode_page_01, sizeof mode_page_01);
+		ptr[3] = (info->read_only || info->force_read_only) ? 0x80 : 0;
+		usb_stor_set_xfer_buf(ptr, sizeof(mode_page_01), srb);
+
+		if ( (srb->cmnd[2] & 0x3F) == 0x01 ) {
+			usb_stor_dbg(us, "Dummy up request for mode page 1\n");
+			return USB_STOR_TRANSPORT_GOOD;
+
+		} else if ( (srb->cmnd[2] & 0x3F) == 0x3F ) {
+			usb_stor_dbg(us, "Dummy up request for all mode pages\n");
+			return USB_STOR_TRANSPORT_GOOD;
+		}
+
+		set_sense_info (5, 0x24, 0);	/* invalid field in command */
+		return USB_STOR_TRANSPORT_FAILED;
+	}
+
+	if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+
+		usb_stor_dbg(us, "%s medium removal. Not that I can do anything about it...\n",
+			     (srb->cmnd[4]&0x03) ? "Prevent" : "Allow");
+
+		return USB_STOR_TRANSPORT_GOOD;
+
+	}
+
+	if (srb->cmnd[0] == READ_10 || srb->cmnd[0] == WRITE_10) {
+
+		page = short_pack(srb->cmnd[3], srb->cmnd[2]);
+		page <<= 16;
+		page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
+		pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
+
+		page <<= info->smallpageshift;
+
+		// convert page to block and page-within-block
+
+		lba = page >> info->blockshift;
+		page = page & info->blockmask;
+
+		// locate physical block corresponding to logical block
+
+		if (lba >= info->max_log_blks) {
+
+			usb_stor_dbg(us, "Error: Requested LBA %04X exceeds maximum block %04X\n",
+				     lba, info->max_log_blks - 1);
+
+			set_sense_info (5, 0x24, 0);	/* invalid field in command */
+
+			return USB_STOR_TRANSPORT_FAILED;
+		}
+
+		pba = info->lba_to_pba[lba];
+
+		if (srb->cmnd[0] == WRITE_10) {
+			usb_stor_dbg(us, "WRITE_10: write block %04X (LBA %04X) page %01X pages %d\n",
+				     pba, lba, page, pages);
+
+			return sddr55_write_data(us, lba, page, pages);
+		} else {
+			usb_stor_dbg(us, "READ_10: read block %04X (LBA %04X) page %01X pages %d\n",
+				     pba, lba, page, pages);
+
+			return sddr55_read_data(us, lba, page, pages);
+		}
+	}
+
+
+	if (srb->cmnd[0] == TEST_UNIT_READY) {
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == START_STOP) {
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	set_sense_info (5, 0x20, 0);	/* illegal command */
+
+	return USB_STOR_TRANSPORT_FAILED; // FIXME: sense buffer?
+}
+
+static struct scsi_host_template sddr55_host_template;
+
+static int sddr55_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - sddr55_usb_ids) + sddr55_unusual_dev_list,
+			&sddr55_host_template);
+	if (result)
+		return result;
+
+	us->transport_name = "SDDR55";
+	us->transport = sddr55_transport;
+	us->transport_reset = sddr55_reset;
+	us->max_lun = 0;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver sddr55_driver = {
+	.name =		DRV_NAME,
+	.probe =	sddr55_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	sddr55_usb_ids,
+	.soft_unbind =	1,
+	.no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(sddr55_driver, sddr55_host_template, DRV_NAME);
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
new file mode 100644
index 000000000..f0d0ca371
--- /dev/null
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -0,0 +1,1872 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
+ *
+ * Current development and maintenance by:
+ *   (c) 2000, 2001 Robert Baruch (autophile@starband.net)
+ *   (c) 2004, 2005 Daniel Drake <dsd@gentoo.org>
+ *
+ * Developed with the assistance of:
+ *   (c) 2002 Alan Stern <stern@rowland.org>
+ *
+ * Flash support based on earlier work by:
+ *   (c) 2002 Thomas Kreiling <usbdev@sm04.de>
+ *
+ * Many originally ATAPI devices were slightly modified to meet the USB
+ * market by using some kind of translation from ATAPI to USB on the host,
+ * and the peripheral would translate from USB back to ATAPI.
+ *
+ * SCM Microsystems (www.scmmicro.com) makes a device, sold to OEM's only, 
+ * which does the USB-to-ATAPI conversion.  By obtaining the data sheet on
+ * their device under nondisclosure agreement, I have been able to write
+ * this driver for Linux.
+ *
+ * The chip used in the device can also be used for EPP and ISA translation
+ * as well. This driver is only guaranteed to work with the ATAPI
+ * translation.
+ *
+ * See the Kconfig help text for a list of devices known to be supported by
+ * this driver.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/cdrom.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "scsiglue.h"
+
+#define DRV_NAME "ums-usbat"
+
+MODULE_DESCRIPTION("Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable");
+MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>, Robert Baruch <autophile@starband.net>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(USB_STORAGE);
+
+/* Supported device types */
+#define USBAT_DEV_HP8200	0x01
+#define USBAT_DEV_FLASH		0x02
+
+#define USBAT_EPP_PORT		0x10
+#define USBAT_EPP_REGISTER	0x30
+#define USBAT_ATA		0x40
+#define USBAT_ISA		0x50
+
+/* Commands (need to be logically OR'd with an access type */
+#define USBAT_CMD_READ_REG		0x00
+#define USBAT_CMD_WRITE_REG		0x01
+#define USBAT_CMD_READ_BLOCK	0x02
+#define USBAT_CMD_WRITE_BLOCK	0x03
+#define USBAT_CMD_COND_READ_BLOCK	0x04
+#define USBAT_CMD_COND_WRITE_BLOCK	0x05
+#define USBAT_CMD_WRITE_REGS	0x07
+
+/* Commands (these don't need an access type) */
+#define USBAT_CMD_EXEC_CMD	0x80
+#define USBAT_CMD_SET_FEAT	0x81
+#define USBAT_CMD_UIO		0x82
+
+/* Methods of accessing UIO register */
+#define USBAT_UIO_READ	1
+#define USBAT_UIO_WRITE	0
+
+/* Qualifier bits */
+#define USBAT_QUAL_FCQ	0x20	/* full compare */
+#define USBAT_QUAL_ALQ	0x10	/* auto load subcount */
+
+/* USBAT Flash Media status types */
+#define USBAT_FLASH_MEDIA_NONE	0
+#define USBAT_FLASH_MEDIA_CF	1
+
+/* USBAT Flash Media change types */
+#define USBAT_FLASH_MEDIA_SAME	0
+#define USBAT_FLASH_MEDIA_CHANGED	1
+
+/* USBAT ATA registers */
+#define USBAT_ATA_DATA      0x10  /* read/write data (R/W) */
+#define USBAT_ATA_FEATURES  0x11  /* set features (W) */
+#define USBAT_ATA_ERROR     0x11  /* error (R) */
+#define USBAT_ATA_SECCNT    0x12  /* sector count (R/W) */
+#define USBAT_ATA_SECNUM    0x13  /* sector number (R/W) */
+#define USBAT_ATA_LBA_ME    0x14  /* cylinder low (R/W) */
+#define USBAT_ATA_LBA_HI    0x15  /* cylinder high (R/W) */
+#define USBAT_ATA_DEVICE    0x16  /* head/device selection (R/W) */
+#define USBAT_ATA_STATUS    0x17  /* device status (R) */
+#define USBAT_ATA_CMD       0x17  /* device command (W) */
+#define USBAT_ATA_ALTSTATUS 0x0E  /* status (no clear IRQ) (R) */
+
+/* USBAT User I/O Data registers */
+#define USBAT_UIO_EPAD		0x80 /* Enable Peripheral Control Signals */
+#define USBAT_UIO_CDT		0x40 /* Card Detect (Read Only) */
+				     /* CDT = ACKD & !UI1 & !UI0 */
+#define USBAT_UIO_1		0x20 /* I/O 1 */
+#define USBAT_UIO_0		0x10 /* I/O 0 */
+#define USBAT_UIO_EPP_ATA	0x08 /* 1=EPP mode, 0=ATA mode */
+#define USBAT_UIO_UI1		0x04 /* Input 1 */
+#define USBAT_UIO_UI0		0x02 /* Input 0 */
+#define USBAT_UIO_INTR_ACK	0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
+
+/* USBAT User I/O Enable registers */
+#define USBAT_UIO_DRVRST	0x80 /* Reset Peripheral */
+#define USBAT_UIO_ACKD		0x40 /* Enable Card Detect */
+#define USBAT_UIO_OE1		0x20 /* I/O 1 set=output/clr=input */
+				     /* If ACKD=1, set OE1 to 1 also. */
+#define USBAT_UIO_OE0		0x10 /* I/O 0 set=output/clr=input */
+#define USBAT_UIO_ADPRST	0x01 /* Reset SCM chip */
+
+/* USBAT Features */
+#define USBAT_FEAT_ETEN	0x80	/* External trigger enable */
+#define USBAT_FEAT_U1	0x08
+#define USBAT_FEAT_U0	0x04
+#define USBAT_FEAT_ET1	0x02
+#define USBAT_FEAT_ET2	0x01
+
+struct usbat_info {
+	int devicetype;
+
+	/* Used for Flash readers only */
+	unsigned long sectors;     /* total sector count */
+	unsigned long ssize;       /* sector size in bytes */
+
+	unsigned char sense_key;
+	unsigned long sense_asc;   /* additional sense code */
+	unsigned long sense_ascq;  /* additional sense code qualifier */
+};
+
+#define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) )
+#define LSB_of(s) ((s)&0xFF)
+#define MSB_of(s) ((s)>>8)
+
+static int transferred = 0;
+
+static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
+static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
+
+static int init_usbat_cd(struct us_data *us);
+static int init_usbat_flash(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+static struct usb_device_id usbat_usb_ids[] = {
+#	include "unusual_usbat.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, usbat_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev usbat_unusual_dev_list[] = {
+#	include "unusual_usbat.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+/*
+ * Convenience function to produce an ATA read/write sectors command
+ * Use cmd=0x20 for read, cmd=0x30 for write
+ */
+static void usbat_pack_ata_sector_cmd(unsigned char *buf,
+					unsigned char thistime,
+					u32 sector, unsigned char cmd)
+{
+	buf[0] = 0;
+	buf[1] = thistime;
+	buf[2] = sector & 0xFF;
+	buf[3] = (sector >>  8) & 0xFF;
+	buf[4] = (sector >> 16) & 0xFF;
+	buf[5] = 0xE0 | ((sector >> 24) & 0x0F);
+	buf[6] = cmd;
+}
+
+/*
+ * Convenience function to get the device type (flash or hp8200)
+ */
+static int usbat_get_device_type(struct us_data *us)
+{
+	return ((struct usbat_info*)us->extra)->devicetype;
+}
+
+/*
+ * Read a register from the device
+ */
+static int usbat_read(struct us_data *us,
+		      unsigned char access,
+		      unsigned char reg,
+		      unsigned char *content)
+{
+	return usb_stor_ctrl_transfer(us,
+		us->recv_ctrl_pipe,
+		access | USBAT_CMD_READ_REG,
+		0xC0,
+		(u16)reg,
+		0,
+		content,
+		1);
+}
+
+/*
+ * Write to a register on the device
+ */
+static int usbat_write(struct us_data *us,
+		       unsigned char access,
+		       unsigned char reg,
+		       unsigned char content)
+{
+	return usb_stor_ctrl_transfer(us,
+		us->send_ctrl_pipe,
+		access | USBAT_CMD_WRITE_REG,
+		0x40,
+		short_pack(reg, content),
+		0,
+		NULL,
+		0);
+}
+
+/*
+ * Convenience function to perform a bulk read
+ */
+static int usbat_bulk_read(struct us_data *us,
+			   void* buf,
+			   unsigned int len,
+			   int use_sg)
+{
+	if (len == 0)
+		return USB_STOR_XFER_GOOD;
+
+	usb_stor_dbg(us, "len = %d\n", len);
+	return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, buf, len, use_sg, NULL);
+}
+
+/*
+ * Convenience function to perform a bulk write
+ */
+static int usbat_bulk_write(struct us_data *us,
+			    void* buf,
+			    unsigned int len,
+			    int use_sg)
+{
+	if (len == 0)
+		return USB_STOR_XFER_GOOD;
+
+	usb_stor_dbg(us, "len = %d\n", len);
+	return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, buf, len, use_sg, NULL);
+}
+
+/*
+ * Some USBAT-specific commands can only be executed over a command transport
+ * This transport allows one (len=8) or two (len=16) vendor-specific commands
+ * to be executed.
+ */
+static int usbat_execute_command(struct us_data *us,
+								 unsigned char *commands,
+								 unsigned int len)
+{
+	return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+								  USBAT_CMD_EXEC_CMD, 0x40, 0, 0,
+								  commands, len);
+}
+
+/*
+ * Read the status register
+ */
+static int usbat_get_status(struct us_data *us, unsigned char *status)
+{
+	int rc;
+	rc = usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status);
+
+	usb_stor_dbg(us, "0x%02X\n", *status);
+	return rc;
+}
+
+/*
+ * Check the device status
+ */
+static int usbat_check_status(struct us_data *us)
+{
+	unsigned char *reply = us->iobuf;
+	int rc;
+
+	rc = usbat_get_status(us, reply);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_FAILED;
+
+	/* error/check condition (0x51 is ok) */
+	if (*reply & 0x01 && *reply != 0x51)
+		return USB_STOR_TRANSPORT_FAILED;
+
+	/* device fault */
+	if (*reply & 0x20)
+		return USB_STOR_TRANSPORT_FAILED;
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Stores critical information in internal registers in preparation for the execution
+ * of a conditional usbat_read_blocks or usbat_write_blocks call.
+ */
+static int usbat_set_shuttle_features(struct us_data *us,
+				      unsigned char external_trigger,
+				      unsigned char epp_control,
+				      unsigned char mask_byte,
+				      unsigned char test_pattern,
+				      unsigned char subcountH,
+				      unsigned char subcountL)
+{
+	unsigned char *command = us->iobuf;
+
+	command[0] = 0x40;
+	command[1] = USBAT_CMD_SET_FEAT;
+
+	/*
+	 * The only bit relevant to ATA access is bit 6
+	 * which defines 8 bit data access (set) or 16 bit (unset)
+	 */
+	command[2] = epp_control;
+
+	/*
+	 * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1,
+	 * ET1 and ET2 define an external event to be checked for on event of a
+	 * _read_blocks or _write_blocks operation. The read/write will not take
+	 * place unless the defined trigger signal is active.
+	 */
+	command[3] = external_trigger;
+
+	/*
+	 * The resultant byte of the mask operation (see mask_byte) is compared for
+	 * equivalence with this test pattern. If equal, the read/write will take
+	 * place.
+	 */
+	command[4] = test_pattern;
+
+	/*
+	 * This value is logically ANDed with the status register field specified
+	 * in the read/write command.
+	 */
+	command[5] = mask_byte;
+
+	/*
+	 * If ALQ is set in the qualifier, this field contains the address of the
+	 * registers where the byte count should be read for transferring the data.
+	 * If ALQ is not set, then this field contains the number of bytes to be
+	 * transferred.
+	 */
+	command[6] = subcountL;
+	command[7] = subcountH;
+
+	return usbat_execute_command(us, command, 8);
+}
+
+/*
+ * Block, waiting for an ATA device to become not busy or to report
+ * an error condition.
+ */
+static int usbat_wait_not_busy(struct us_data *us, int minutes)
+{
+	int i;
+	int result;
+	unsigned char *status = us->iobuf;
+
+	/*
+	 * Synchronizing cache on a CDR could take a heck of a long time,
+	 * but probably not more than 10 minutes or so. On the other hand,
+	 * doing a full blank on a CDRW at speed 1 will take about 75
+	 * minutes!
+	 */
+
+	for (i=0; i<1200+minutes*60; i++) {
+
+ 		result = usbat_get_status(us, status);
+
+		if (result!=USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+		if (*status & 0x01) { /* check condition */
+			result = usbat_read(us, USBAT_ATA, 0x10, status);
+			return USB_STOR_TRANSPORT_FAILED;
+		}
+		if (*status & 0x20) /* device fault */
+			return USB_STOR_TRANSPORT_FAILED;
+
+		if ((*status & 0x80)==0x00) { /* not busy */
+			usb_stor_dbg(us, "Waited not busy for %d steps\n", i);
+			return USB_STOR_TRANSPORT_GOOD;
+		}
+
+		if (i<500)
+			msleep(10); /* 5 seconds */
+		else if (i<700)
+			msleep(50); /* 10 seconds */
+		else if (i<1200)
+			msleep(100); /* 50 seconds */
+		else
+			msleep(1000); /* X minutes */
+	}
+
+	usb_stor_dbg(us, "Waited not busy for %d minutes, timing out\n",
+		     minutes);
+	return USB_STOR_TRANSPORT_FAILED;
+}
+
+/*
+ * Read block data from the data register
+ */
+static int usbat_read_block(struct us_data *us,
+			    void* buf,
+			    unsigned short len,
+			    int use_sg)
+{
+	int result;
+	unsigned char *command = us->iobuf;
+
+	if (!len)
+		return USB_STOR_TRANSPORT_GOOD;
+
+	command[0] = 0xC0;
+	command[1] = USBAT_ATA | USBAT_CMD_READ_BLOCK;
+	command[2] = USBAT_ATA_DATA;
+	command[3] = 0;
+	command[4] = 0;
+	command[5] = 0;
+	command[6] = LSB_of(len);
+	command[7] = MSB_of(len);
+
+	result = usbat_execute_command(us, command, 8);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	result = usbat_bulk_read(us, buf, len, use_sg);
+	return (result == USB_STOR_XFER_GOOD ?
+			USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
+}
+
+/*
+ * Write block data via the data register
+ */
+static int usbat_write_block(struct us_data *us,
+			     unsigned char access,
+			     void* buf,
+			     unsigned short len,
+			     int minutes,
+			     int use_sg)
+{
+	int result;
+	unsigned char *command = us->iobuf;
+
+	if (!len)
+		return USB_STOR_TRANSPORT_GOOD;
+
+	command[0] = 0x40;
+	command[1] = access | USBAT_CMD_WRITE_BLOCK;
+	command[2] = USBAT_ATA_DATA;
+	command[3] = 0;
+	command[4] = 0;
+	command[5] = 0;
+	command[6] = LSB_of(len);
+	command[7] = MSB_of(len);
+
+	result = usbat_execute_command(us, command, 8);
+
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	result = usbat_bulk_write(us, buf, len, use_sg);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	return usbat_wait_not_busy(us, minutes);
+}
+
+/*
+ * Process read and write requests
+ */
+static int usbat_hp8200e_rw_block_test(struct us_data *us,
+				       unsigned char access,
+				       unsigned char *registers,
+				       unsigned char *data_out,
+				       unsigned short num_registers,
+				       unsigned char data_reg,
+				       unsigned char status_reg,
+				       unsigned char timeout,
+				       unsigned char qualifier,
+				       int direction,
+				       void *buf,
+				       unsigned short len,
+				       int use_sg,
+				       int minutes)
+{
+	int result;
+	unsigned int pipe = (direction == DMA_FROM_DEVICE) ?
+			us->recv_bulk_pipe : us->send_bulk_pipe;
+
+	unsigned char *command = us->iobuf;
+	int i, j;
+	int cmdlen;
+	unsigned char *data = us->iobuf;
+	unsigned char *status = us->iobuf;
+
+	BUG_ON(num_registers > US_IOBUF_SIZE/2);
+
+	for (i=0; i<20; i++) {
+
+		/*
+		 * The first time we send the full command, which consists
+		 * of downloading the SCSI command followed by downloading
+		 * the data via a write-and-test.  Any other time we only
+		 * send the command to download the data -- the SCSI command
+		 * is still 'active' in some sense in the device.
+		 * 
+		 * We're only going to try sending the data 10 times. After
+		 * that, we just return a failure.
+		 */
+
+		if (i==0) {
+			cmdlen = 16;
+			/*
+			 * Write to multiple registers
+			 * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is
+			 * necessary here, but that's what came out of the
+			 * trace every single time.
+			 */
+			command[0] = 0x40;
+			command[1] = access | USBAT_CMD_WRITE_REGS;
+			command[2] = 0x07;
+			command[3] = 0x17;
+			command[4] = 0xFC;
+			command[5] = 0xE7;
+			command[6] = LSB_of(num_registers*2);
+			command[7] = MSB_of(num_registers*2);
+		} else
+			cmdlen = 8;
+
+		/* Conditionally read or write blocks */
+		command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0);
+		command[cmdlen-7] = access |
+				(direction==DMA_TO_DEVICE ?
+				 USBAT_CMD_COND_WRITE_BLOCK : USBAT_CMD_COND_READ_BLOCK);
+		command[cmdlen-6] = data_reg;
+		command[cmdlen-5] = status_reg;
+		command[cmdlen-4] = timeout;
+		command[cmdlen-3] = qualifier;
+		command[cmdlen-2] = LSB_of(len);
+		command[cmdlen-1] = MSB_of(len);
+
+		result = usbat_execute_command(us, command, cmdlen);
+
+		if (result != USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (i==0) {
+
+			for (j=0; j<num_registers; j++) {
+				data[j<<1] = registers[j];
+				data[1+(j<<1)] = data_out[j];
+			}
+
+			result = usbat_bulk_write(us, data, num_registers*2, 0);
+			if (result != USB_STOR_XFER_GOOD)
+				return USB_STOR_TRANSPORT_ERROR;
+
+		}
+
+		result = usb_stor_bulk_transfer_sg(us,
+			pipe, buf, len, use_sg, NULL);
+
+		/*
+		 * If we get a stall on the bulk download, we'll retry
+		 * the bulk download -- but not the SCSI command because
+		 * in some sense the SCSI command is still 'active' and
+		 * waiting for the data. Don't ask me why this should be;
+		 * I'm only following what the Windoze driver did.
+		 *
+		 * Note that a stall for the test-and-read/write command means
+		 * that the test failed. In this case we're testing to make
+		 * sure that the device is error-free
+		 * (i.e. bit 0 -- CHK -- of status is 0). The most likely
+		 * hypothesis is that the USBAT chip somehow knows what
+		 * the device will accept, but doesn't give the device any
+		 * data until all data is received. Thus, the device would
+		 * still be waiting for the first byte of data if a stall
+		 * occurs, even if the stall implies that some data was
+		 * transferred.
+		 */
+
+		if (result == USB_STOR_XFER_SHORT ||
+				result == USB_STOR_XFER_STALLED) {
+
+			/*
+			 * If we're reading and we stalled, then clear
+			 * the bulk output pipe only the first time.
+			 */
+
+			if (direction==DMA_FROM_DEVICE && i==0) {
+				if (usb_stor_clear_halt(us,
+						us->send_bulk_pipe) < 0)
+					return USB_STOR_TRANSPORT_ERROR;
+			}
+
+			/*
+			 * Read status: is the device angry, or just busy?
+			 */
+
+ 			result = usbat_read(us, USBAT_ATA, 
+				direction==DMA_TO_DEVICE ?
+					USBAT_ATA_STATUS : USBAT_ATA_ALTSTATUS,
+				status);
+
+			if (result!=USB_STOR_XFER_GOOD)
+				return USB_STOR_TRANSPORT_ERROR;
+			if (*status & 0x01) /* check condition */
+				return USB_STOR_TRANSPORT_FAILED;
+			if (*status & 0x20) /* device fault */
+				return USB_STOR_TRANSPORT_FAILED;
+
+			usb_stor_dbg(us, "Redoing %s\n",
+				     direction == DMA_TO_DEVICE
+				     ? "write" : "read");
+
+		} else if (result != USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+		else
+			return usbat_wait_not_busy(us, minutes);
+
+	}
+
+	usb_stor_dbg(us, "Bummer! %s bulk data 20 times failed\n",
+		     direction == DMA_TO_DEVICE ? "Writing" : "Reading");
+
+	return USB_STOR_TRANSPORT_FAILED;
+}
+
+/*
+ * Write to multiple registers:
+ * Allows us to write specific data to any registers. The data to be written
+ * gets packed in this sequence: reg0, data0, reg1, data1, ..., regN, dataN
+ * which gets sent through bulk out.
+ * Not designed for large transfers of data!
+ */
+static int usbat_multiple_write(struct us_data *us,
+				unsigned char *registers,
+				unsigned char *data_out,
+				unsigned short num_registers)
+{
+	int i, result;
+	unsigned char *data = us->iobuf;
+	unsigned char *command = us->iobuf;
+
+	BUG_ON(num_registers > US_IOBUF_SIZE/2);
+
+	/* Write to multiple registers, ATA access */
+	command[0] = 0x40;
+	command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS;
+
+	/* No relevance */
+	command[2] = 0;
+	command[3] = 0;
+	command[4] = 0;
+	command[5] = 0;
+
+	/* Number of bytes to be transferred (incl. addresses and data) */
+	command[6] = LSB_of(num_registers*2);
+	command[7] = MSB_of(num_registers*2);
+
+	/* The setup command */
+	result = usbat_execute_command(us, command, 8);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/* Create the reg/data, reg/data sequence */
+	for (i=0; i<num_registers; i++) {
+		data[i<<1] = registers[i];
+		data[1+(i<<1)] = data_out[i];
+	}
+
+	/* Send the data */
+	result = usbat_bulk_write(us, data, num_registers*2, 0);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	if (usbat_get_device_type(us) == USBAT_DEV_HP8200)
+		return usbat_wait_not_busy(us, 0);
+	else
+		return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Conditionally read blocks from device:
+ * Allows us to read blocks from a specific data register, based upon the
+ * condition that a status register can be successfully masked with a status
+ * qualifier. If this condition is not initially met, the read will wait
+ * up until a maximum amount of time has elapsed, as specified by timeout.
+ * The read will start when the condition is met, otherwise the command aborts.
+ *
+ * The qualifier defined here is not the value that is masked, it defines
+ * conditions for the write to take place. The actual masked qualifier (and
+ * other related details) are defined beforehand with _set_shuttle_features().
+ */
+static int usbat_read_blocks(struct us_data *us,
+			     void* buffer,
+			     int len,
+			     int use_sg)
+{
+	int result;
+	unsigned char *command = us->iobuf;
+
+	command[0] = 0xC0;
+	command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK;
+	command[2] = USBAT_ATA_DATA;
+	command[3] = USBAT_ATA_STATUS;
+	command[4] = 0xFD; /* Timeout (ms); */
+	command[5] = USBAT_QUAL_FCQ;
+	command[6] = LSB_of(len);
+	command[7] = MSB_of(len);
+
+	/* Multiple block read setup command */
+	result = usbat_execute_command(us, command, 8);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_FAILED;
+	
+	/* Read the blocks we just asked for */
+	result = usbat_bulk_read(us, buffer, len, use_sg);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_FAILED;
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Conditionally write blocks to device:
+ * Allows us to write blocks to a specific data register, based upon the
+ * condition that a status register can be successfully masked with a status
+ * qualifier. If this condition is not initially met, the write will wait
+ * up until a maximum amount of time has elapsed, as specified by timeout.
+ * The read will start when the condition is met, otherwise the command aborts.
+ *
+ * The qualifier defined here is not the value that is masked, it defines
+ * conditions for the write to take place. The actual masked qualifier (and
+ * other related details) are defined beforehand with _set_shuttle_features().
+ */
+static int usbat_write_blocks(struct us_data *us,
+			      void* buffer,
+			      int len,
+			      int use_sg)
+{
+	int result;
+	unsigned char *command = us->iobuf;
+
+	command[0] = 0x40;
+	command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK;
+	command[2] = USBAT_ATA_DATA;
+	command[3] = USBAT_ATA_STATUS;
+	command[4] = 0xFD; /* Timeout (ms) */
+	command[5] = USBAT_QUAL_FCQ;
+	command[6] = LSB_of(len);
+	command[7] = MSB_of(len);
+
+	/* Multiple block write setup command */
+	result = usbat_execute_command(us, command, 8);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_FAILED;
+	
+	/* Write the data */
+	result = usbat_bulk_write(us, buffer, len, use_sg);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_FAILED;
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Read the User IO register
+ */
+static int usbat_read_user_io(struct us_data *us, unsigned char *data_flags)
+{
+	int result;
+
+	result = usb_stor_ctrl_transfer(us,
+		us->recv_ctrl_pipe,
+		USBAT_CMD_UIO,
+		0xC0,
+		0,
+		0,
+		data_flags,
+		USBAT_UIO_READ);
+
+	usb_stor_dbg(us, "UIO register reads %02X\n", *data_flags);
+
+	return result;
+}
+
+/*
+ * Write to the User IO register
+ */
+static int usbat_write_user_io(struct us_data *us,
+			       unsigned char enable_flags,
+			       unsigned char data_flags)
+{
+	return usb_stor_ctrl_transfer(us,
+		us->send_ctrl_pipe,
+		USBAT_CMD_UIO,
+		0x40,
+		short_pack(enable_flags, data_flags),
+		0,
+		NULL,
+		USBAT_UIO_WRITE);
+}
+
+/*
+ * Reset the device
+ * Often needed on media change.
+ */
+static int usbat_device_reset(struct us_data *us)
+{
+	int rc;
+
+	/*
+	 * Reset peripheral, enable peripheral control signals
+	 * (bring reset signal up)
+	 */
+	rc = usbat_write_user_io(us,
+							 USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0,
+							 USBAT_UIO_EPAD | USBAT_UIO_1);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+			
+	/*
+	 * Enable peripheral control signals
+	 * (bring reset signal down)
+	 */
+	rc = usbat_write_user_io(us,
+							 USBAT_UIO_OE1  | USBAT_UIO_OE0,
+							 USBAT_UIO_EPAD | USBAT_UIO_1);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Enable card detect
+ */
+static int usbat_device_enable_cdt(struct us_data *us)
+{
+	int rc;
+
+	/* Enable peripheral control signals and card detect */
+	rc = usbat_write_user_io(us,
+							 USBAT_UIO_ACKD | USBAT_UIO_OE1  | USBAT_UIO_OE0,
+							 USBAT_UIO_EPAD | USBAT_UIO_1);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Determine if media is present.
+ */
+static int usbat_flash_check_media_present(struct us_data *us,
+					   unsigned char *uio)
+{
+	if (*uio & USBAT_UIO_UI0) {
+		usb_stor_dbg(us, "no media detected\n");
+		return USBAT_FLASH_MEDIA_NONE;
+	}
+
+	return USBAT_FLASH_MEDIA_CF;
+}
+
+/*
+ * Determine if media has changed since last operation
+ */
+static int usbat_flash_check_media_changed(struct us_data *us,
+					   unsigned char *uio)
+{
+	if (*uio & USBAT_UIO_0) {
+		usb_stor_dbg(us, "media change detected\n");
+		return USBAT_FLASH_MEDIA_CHANGED;
+	}
+
+	return USBAT_FLASH_MEDIA_SAME;
+}
+
+/*
+ * Check for media change / no media and handle the situation appropriately
+ */
+static int usbat_flash_check_media(struct us_data *us,
+				   struct usbat_info *info)
+{
+	int rc;
+	unsigned char *uio = us->iobuf;
+
+	rc = usbat_read_user_io(us, uio);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/* Check for media existence */
+	rc = usbat_flash_check_media_present(us, uio);
+	if (rc == USBAT_FLASH_MEDIA_NONE) {
+		info->sense_key = 0x02;
+		info->sense_asc = 0x3A;
+		info->sense_ascq = 0x00;
+		return USB_STOR_TRANSPORT_FAILED;
+	}
+
+	/* Check for media change */
+	rc = usbat_flash_check_media_changed(us, uio);
+	if (rc == USBAT_FLASH_MEDIA_CHANGED) {
+
+		/* Reset and re-enable card detect */
+		rc = usbat_device_reset(us);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+		rc = usbat_device_enable_cdt(us);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+
+		msleep(50);
+
+		rc = usbat_read_user_io(us, uio);
+		if (rc != USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+		
+		info->sense_key = UNIT_ATTENTION;
+		info->sense_asc = 0x28;
+		info->sense_ascq = 0x00;
+		return USB_STOR_TRANSPORT_FAILED;
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Determine whether we are controlling a flash-based reader/writer,
+ * or a HP8200-based CD drive.
+ * Sets transport functions as appropriate.
+ */
+static int usbat_identify_device(struct us_data *us,
+				 struct usbat_info *info)
+{
+	int rc;
+	unsigned char status;
+
+	if (!us || !info)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	rc = usbat_device_reset(us);
+	if (rc != USB_STOR_TRANSPORT_GOOD)
+		return rc;
+	msleep(500);
+
+	/*
+	 * In attempt to distinguish between HP CDRW's and Flash readers, we now
+	 * execute the IDENTIFY PACKET DEVICE command. On ATA devices (i.e. flash
+	 * readers), this command should fail with error. On ATAPI devices (i.e.
+	 * CDROM drives), it should succeed.
+	 */
+	rc = usbat_write(us, USBAT_ATA, USBAT_ATA_CMD, 0xA1);
+ 	if (rc != USB_STOR_XFER_GOOD)
+ 		return USB_STOR_TRANSPORT_ERROR;
+
+	rc = usbat_get_status(us, &status);
+ 	if (rc != USB_STOR_XFER_GOOD)
+ 		return USB_STOR_TRANSPORT_ERROR;
+
+	/* Check for error bit, or if the command 'fell through' */
+	if (status == 0xA1 || !(status & 0x01)) {
+		/* Device is HP 8200 */
+		usb_stor_dbg(us, "Detected HP8200 CDRW\n");
+		info->devicetype = USBAT_DEV_HP8200;
+	} else {
+		/* Device is a CompactFlash reader/writer */
+		usb_stor_dbg(us, "Detected Flash reader/writer\n");
+		info->devicetype = USBAT_DEV_FLASH;
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Set the transport function based on the device type
+ */
+static int usbat_set_transport(struct us_data *us,
+			       struct usbat_info *info,
+			       int devicetype)
+{
+
+	if (!info->devicetype)
+		info->devicetype = devicetype;
+
+	if (!info->devicetype)
+		usbat_identify_device(us, info);
+
+	switch (info->devicetype) {
+	default:
+		return USB_STOR_TRANSPORT_ERROR;
+
+	case  USBAT_DEV_HP8200:
+		us->transport = usbat_hp8200e_transport;
+		break;
+
+	case USBAT_DEV_FLASH:
+		us->transport = usbat_flash_transport;
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ * Read the media capacity
+ */
+static int usbat_flash_get_sector_count(struct us_data *us,
+					struct usbat_info *info)
+{
+	unsigned char registers[3] = {
+		USBAT_ATA_SECCNT,
+		USBAT_ATA_DEVICE,
+		USBAT_ATA_CMD,
+	};
+	unsigned char  command[3] = { 0x01, 0xA0, 0xEC };
+	unsigned char *reply;
+	unsigned char status;
+	int rc;
+
+	if (!us || !info)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	reply = kmalloc(512, GFP_NOIO);
+	if (!reply)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/* ATA command : IDENTIFY DEVICE */
+	rc = usbat_multiple_write(us, registers, command, 3);
+	if (rc != USB_STOR_XFER_GOOD) {
+		usb_stor_dbg(us, "Gah! identify_device failed\n");
+		rc = USB_STOR_TRANSPORT_ERROR;
+		goto leave;
+	}
+
+	/* Read device status */
+	if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) {
+		rc = USB_STOR_TRANSPORT_ERROR;
+		goto leave;
+	}
+
+	msleep(100);
+
+	/* Read the device identification data */
+	rc = usbat_read_block(us, reply, 512, 0);
+	if (rc != USB_STOR_TRANSPORT_GOOD)
+		goto leave;
+
+	info->sectors = ((u32)(reply[117]) << 24) |
+		((u32)(reply[116]) << 16) |
+		((u32)(reply[115]) <<  8) |
+		((u32)(reply[114])      );
+
+	rc = USB_STOR_TRANSPORT_GOOD;
+
+ leave:
+	kfree(reply);
+	return rc;
+}
+
+/*
+ * Read data from device
+ */
+static int usbat_flash_read_data(struct us_data *us,
+								 struct usbat_info *info,
+								 u32 sector,
+								 u32 sectors)
+{
+	unsigned char registers[7] = {
+		USBAT_ATA_FEATURES,
+		USBAT_ATA_SECCNT,
+		USBAT_ATA_SECNUM,
+		USBAT_ATA_LBA_ME,
+		USBAT_ATA_LBA_HI,
+		USBAT_ATA_DEVICE,
+		USBAT_ATA_STATUS,
+	};
+	unsigned char command[7];
+	unsigned char *buffer;
+	unsigned char  thistime;
+	unsigned int totallen, alloclen;
+	int len, result;
+	unsigned int sg_offset = 0;
+	struct scatterlist *sg = NULL;
+
+	result = usbat_flash_check_media(us, info);
+	if (result != USB_STOR_TRANSPORT_GOOD)
+		return result;
+
+	/*
+	 * we're working in LBA mode.  according to the ATA spec,
+	 * we can support up to 28-bit addressing.  I don't know if Jumpshot
+	 * supports beyond 24-bit addressing.  It's kind of hard to test
+	 * since it requires > 8GB CF card.
+	 */
+
+	if (sector > 0x0FFFFFFF)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	totallen = sectors * info->ssize;
+
+	/*
+	 * Since we don't read more than 64 KB at a time, we have to create
+	 * a bounce buffer and move the data a piece at a time between the
+	 * bounce buffer and the actual transfer buffer.
+	 */
+
+	alloclen = min(totallen, 65536u);
+	buffer = kmalloc(alloclen, GFP_NOIO);
+	if (buffer == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	do {
+		/*
+		 * loop, never allocate or transfer more than 64k at once
+		 * (min(128k, 255*info->ssize) is the real limit)
+		 */
+		len = min(totallen, alloclen);
+		thistime = (len / info->ssize) & 0xff;
+ 
+		/* ATA command 0x20 (READ SECTORS) */
+		usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20);
+
+		/* Write/execute ATA read command */
+		result = usbat_multiple_write(us, registers, command, 7);
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			goto leave;
+
+		/* Read the data we just requested */
+		result = usbat_read_blocks(us, buffer, len, 0);
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			goto leave;
+  	 
+		usb_stor_dbg(us, "%d bytes\n", len);
+	
+		/* Store the data in the transfer buffer */
+		usb_stor_access_xfer_buf(buffer, len, us->srb,
+					 &sg, &sg_offset, TO_XFER_BUF);
+
+		sector += thistime;
+		totallen -= len;
+	} while (totallen > 0);
+
+	kfree(buffer);
+	return USB_STOR_TRANSPORT_GOOD;
+
+leave:
+	kfree(buffer);
+	return USB_STOR_TRANSPORT_ERROR;
+}
+
+/*
+ * Write data to device
+ */
+static int usbat_flash_write_data(struct us_data *us,
+								  struct usbat_info *info,
+								  u32 sector,
+								  u32 sectors)
+{
+	unsigned char registers[7] = {
+		USBAT_ATA_FEATURES,
+		USBAT_ATA_SECCNT,
+		USBAT_ATA_SECNUM,
+		USBAT_ATA_LBA_ME,
+		USBAT_ATA_LBA_HI,
+		USBAT_ATA_DEVICE,
+		USBAT_ATA_STATUS,
+	};
+	unsigned char command[7];
+	unsigned char *buffer;
+	unsigned char  thistime;
+	unsigned int totallen, alloclen;
+	int len, result;
+	unsigned int sg_offset = 0;
+	struct scatterlist *sg = NULL;
+
+	result = usbat_flash_check_media(us, info);
+	if (result != USB_STOR_TRANSPORT_GOOD)
+		return result;
+
+	/*
+	 * we're working in LBA mode.  according to the ATA spec,
+	 * we can support up to 28-bit addressing.  I don't know if the device
+	 * supports beyond 24-bit addressing.  It's kind of hard to test
+	 * since it requires > 8GB media.
+	 */
+
+	if (sector > 0x0FFFFFFF)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	totallen = sectors * info->ssize;
+
+	/*
+	 * Since we don't write more than 64 KB at a time, we have to create
+	 * a bounce buffer and move the data a piece at a time between the
+	 * bounce buffer and the actual transfer buffer.
+	 */
+
+	alloclen = min(totallen, 65536u);
+	buffer = kmalloc(alloclen, GFP_NOIO);
+	if (buffer == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	do {
+		/*
+		 * loop, never allocate or transfer more than 64k at once
+		 * (min(128k, 255*info->ssize) is the real limit)
+		 */
+		len = min(totallen, alloclen);
+		thistime = (len / info->ssize) & 0xff;
+
+		/* Get the data from the transfer buffer */
+		usb_stor_access_xfer_buf(buffer, len, us->srb,
+					 &sg, &sg_offset, FROM_XFER_BUF);
+
+		/* ATA command 0x30 (WRITE SECTORS) */
+		usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30);
+
+		/* Write/execute ATA write command */
+		result = usbat_multiple_write(us, registers, command, 7);
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			goto leave;
+
+		/* Write the data */
+		result = usbat_write_blocks(us, buffer, len, 0);
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			goto leave;
+
+		sector += thistime;
+		totallen -= len;
+	} while (totallen > 0);
+
+	kfree(buffer);
+	return result;
+
+leave:
+	kfree(buffer);
+	return USB_STOR_TRANSPORT_ERROR;
+}
+
+/*
+ * Squeeze a potentially huge (> 65535 byte) read10 command into
+ * a little ( <= 65535 byte) ATAPI pipe
+ */
+static int usbat_hp8200e_handle_read10(struct us_data *us,
+				       unsigned char *registers,
+				       unsigned char *data,
+				       struct scsi_cmnd *srb)
+{
+	int result = USB_STOR_TRANSPORT_GOOD;
+	unsigned char *buffer;
+	unsigned int len;
+	unsigned int sector;
+	unsigned int sg_offset = 0;
+	struct scatterlist *sg = NULL;
+
+	usb_stor_dbg(us, "transfersize %d\n", srb->transfersize);
+
+	if (scsi_bufflen(srb) < 0x10000) {
+
+		result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, 
+			registers, data, 19,
+			USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
+			(USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
+			DMA_FROM_DEVICE,
+			scsi_sglist(srb),
+			scsi_bufflen(srb), scsi_sg_count(srb), 1);
+
+		return result;
+	}
+
+	/*
+	 * Since we're requesting more data than we can handle in
+	 * a single read command (max is 64k-1), we will perform
+	 * multiple reads, but each read must be in multiples of
+	 * a sector.  Luckily the sector size is in srb->transfersize
+	 * (see linux/drivers/scsi/sr.c).
+	 */
+
+	if (data[7+0] == GPCMD_READ_CD) {
+		len = short_pack(data[7+9], data[7+8]);
+		len <<= 16;
+		len |= data[7+7];
+		usb_stor_dbg(us, "GPCMD_READ_CD: len %d\n", len);
+		srb->transfersize = scsi_bufflen(srb)/len;
+	}
+
+	if (!srb->transfersize)  {
+		srb->transfersize = 2048; /* A guess */
+		usb_stor_dbg(us, "transfersize 0, forcing %d\n",
+			     srb->transfersize);
+	}
+
+	/*
+	 * Since we only read in one block at a time, we have to create
+	 * a bounce buffer and move the data a piece at a time between the
+	 * bounce buffer and the actual transfer buffer.
+	 */
+
+	len = (65535/srb->transfersize) * srb->transfersize;
+	usb_stor_dbg(us, "Max read is %d bytes\n", len);
+	len = min(len, scsi_bufflen(srb));
+	buffer = kmalloc(len, GFP_NOIO);
+	if (buffer == NULL) /* bloody hell! */
+		return USB_STOR_TRANSPORT_FAILED;
+	sector = short_pack(data[7+3], data[7+2]);
+	sector <<= 16;
+	sector |= short_pack(data[7+5], data[7+4]);
+	transferred = 0;
+
+	while (transferred != scsi_bufflen(srb)) {
+
+		if (len > scsi_bufflen(srb) - transferred)
+			len = scsi_bufflen(srb) - transferred;
+
+		data[3] = len&0xFF; 	  /* (cylL) = expected length (L) */
+		data[4] = (len>>8)&0xFF;  /* (cylH) = expected length (H) */
+
+		/* Fix up the SCSI command sector and num sectors */
+
+		data[7+2] = MSB_of(sector>>16); /* SCSI command sector */
+		data[7+3] = LSB_of(sector>>16);
+		data[7+4] = MSB_of(sector&0xFFFF);
+		data[7+5] = LSB_of(sector&0xFFFF);
+		if (data[7+0] == GPCMD_READ_CD)
+			data[7+6] = 0;
+		data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */
+		data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */
+
+		result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, 
+			registers, data, 19,
+			USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, 
+			(USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
+			DMA_FROM_DEVICE,
+			buffer,
+			len, 0, 1);
+
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			break;
+
+		/* Store the data in the transfer buffer */
+		usb_stor_access_xfer_buf(buffer, len, srb,
+				 &sg, &sg_offset, TO_XFER_BUF);
+
+		/* Update the amount transferred and the sector number */
+
+		transferred += len;
+		sector += len / srb->transfersize;
+
+	} /* while transferred != scsi_bufflen(srb) */
+
+	kfree(buffer);
+	return result;
+}
+
+static int usbat_select_and_test_registers(struct us_data *us)
+{
+	int selector;
+	unsigned char *status = us->iobuf;
+
+	/* try device = master, then device = slave. */
+	for (selector = 0xA0; selector <= 0xB0; selector += 0x10) {
+		if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (usbat_read(us, USBAT_ATA, USBAT_ATA_DEVICE, status) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_ME, 0x55) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_HI, 0xAA) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Initialize the USBAT processor and the storage device
+ */
+static int init_usbat(struct us_data *us, int devicetype)
+{
+	int rc;
+	struct usbat_info *info;
+	unsigned char subcountH = USBAT_ATA_LBA_HI;
+	unsigned char subcountL = USBAT_ATA_LBA_ME;
+	unsigned char *status = us->iobuf;
+
+	us->extra = kzalloc(sizeof(struct usbat_info), GFP_NOIO);
+	if (!us->extra)
+		return -ENOMEM;
+
+	info = (struct usbat_info *) (us->extra);
+
+	/* Enable peripheral control signals */
+	rc = usbat_write_user_io(us,
+				 USBAT_UIO_OE1 | USBAT_UIO_OE0,
+				 USBAT_UIO_EPAD | USBAT_UIO_1);
+	if (rc != USB_STOR_XFER_GOOD)
+		return -EIO;
+
+	usb_stor_dbg(us, "INIT 1\n");
+
+	msleep(2000);
+
+	rc = usbat_read_user_io(us, status);
+	if (rc != USB_STOR_TRANSPORT_GOOD)
+		return -EIO;
+
+	usb_stor_dbg(us, "INIT 2\n");
+
+	rc = usbat_read_user_io(us, status);
+	if (rc != USB_STOR_XFER_GOOD)
+		return -EIO;
+
+	rc = usbat_read_user_io(us, status);
+	if (rc != USB_STOR_XFER_GOOD)
+		return -EIO;
+
+	usb_stor_dbg(us, "INIT 3\n");
+
+	rc = usbat_select_and_test_registers(us);
+	if (rc != USB_STOR_TRANSPORT_GOOD)
+		return -EIO;
+
+	usb_stor_dbg(us, "INIT 4\n");
+
+	rc = usbat_read_user_io(us, status);
+	if (rc != USB_STOR_XFER_GOOD)
+		return -EIO;
+
+	usb_stor_dbg(us, "INIT 5\n");
+
+	/* Enable peripheral control signals and card detect */
+	rc = usbat_device_enable_cdt(us);
+	if (rc != USB_STOR_TRANSPORT_GOOD)
+		return -EIO;
+
+	usb_stor_dbg(us, "INIT 6\n");
+
+	rc = usbat_read_user_io(us, status);
+	if (rc != USB_STOR_XFER_GOOD)
+		return -EIO;
+
+	usb_stor_dbg(us, "INIT 7\n");
+
+	msleep(1400);
+
+	rc = usbat_read_user_io(us, status);
+	if (rc != USB_STOR_XFER_GOOD)
+		return -EIO;
+
+	usb_stor_dbg(us, "INIT 8\n");
+
+	rc = usbat_select_and_test_registers(us);
+	if (rc != USB_STOR_TRANSPORT_GOOD)
+		return -EIO;
+
+	usb_stor_dbg(us, "INIT 9\n");
+
+	/* At this point, we need to detect which device we are using */
+	if (usbat_set_transport(us, info, devicetype))
+		return -EIO;
+
+	usb_stor_dbg(us, "INIT 10\n");
+
+	if (usbat_get_device_type(us) == USBAT_DEV_FLASH) { 
+		subcountH = 0x02;
+		subcountL = 0x00;
+	}
+	rc = usbat_set_shuttle_features(us, (USBAT_FEAT_ETEN | USBAT_FEAT_ET2 | USBAT_FEAT_ET1),
+									0x00, 0x88, 0x08, subcountH, subcountL);
+	if (rc != USB_STOR_XFER_GOOD)
+		return -EIO;
+
+	usb_stor_dbg(us, "INIT 11\n");
+
+	return 0;
+}
+
+/*
+ * Transport for the HP 8200e
+ */
+static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	int result;
+	unsigned char *status = us->iobuf;
+	unsigned char registers[32];
+	unsigned char data[32];
+	unsigned int len;
+	int i;
+
+	len = scsi_bufflen(srb);
+
+	/*
+	 * Send A0 (ATA PACKET COMMAND).
+	 * Note: I guess we're never going to get any of the ATA
+	 * commands... just ATA Packet Commands.
+ 	 */
+
+	registers[0] = USBAT_ATA_FEATURES;
+	registers[1] = USBAT_ATA_SECCNT;
+	registers[2] = USBAT_ATA_SECNUM;
+	registers[3] = USBAT_ATA_LBA_ME;
+	registers[4] = USBAT_ATA_LBA_HI;
+	registers[5] = USBAT_ATA_DEVICE;
+	registers[6] = USBAT_ATA_CMD;
+	data[0] = 0x00;
+	data[1] = 0x00;
+	data[2] = 0x00;
+	data[3] = len&0xFF; 		/* (cylL) = expected length (L) */
+	data[4] = (len>>8)&0xFF; 	/* (cylH) = expected length (H) */
+	data[5] = 0xB0; 		/* (device sel) = slave */
+	data[6] = 0xA0; 		/* (command) = ATA PACKET COMMAND */
+
+	for (i=7; i<19; i++) {
+		registers[i] = 0x10;
+		data[i] = (i-7 >= srb->cmd_len) ? 0 : srb->cmnd[i-7];
+	}
+
+	result = usbat_get_status(us, status);
+	usb_stor_dbg(us, "Status = %02X\n", *status);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+	if (srb->cmnd[0] == TEST_UNIT_READY)
+		transferred = 0;
+
+	if (srb->sc_data_direction == DMA_TO_DEVICE) {
+
+		result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, 
+			registers, data, 19,
+			USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
+			(USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
+			DMA_TO_DEVICE,
+			scsi_sglist(srb),
+			len, scsi_sg_count(srb), 10);
+
+		if (result == USB_STOR_TRANSPORT_GOOD) {
+			transferred += len;
+			usb_stor_dbg(us, "Wrote %08X bytes\n", transferred);
+		}
+
+		return result;
+
+	} else if (srb->cmnd[0] == READ_10 ||
+		   srb->cmnd[0] == GPCMD_READ_CD) {
+
+		return usbat_hp8200e_handle_read10(us, registers, data, srb);
+
+	}
+
+	if (len > 0xFFFF) {
+		usb_stor_dbg(us, "Error: len = %08X... what do I do now?\n",
+			     len);
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	result = usbat_multiple_write(us, registers, data, 7);
+
+	if (result != USB_STOR_TRANSPORT_GOOD)
+		return result;
+
+	/*
+	 * Write the 12-byte command header.
+	 *
+	 * If the command is BLANK then set the timer for 75 minutes.
+	 * Otherwise set it for 10 minutes.
+	 *
+	 * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW
+	 * AT SPEED 4 IS UNRELIABLE!!!
+	 */
+
+	result = usbat_write_block(us, USBAT_ATA, srb->cmnd, 12,
+				   srb->cmnd[0] == GPCMD_BLANK ? 75 : 10, 0);
+
+	if (result != USB_STOR_TRANSPORT_GOOD)
+		return result;
+
+	/* If there is response data to be read in then do it here. */
+
+	if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) {
+
+		/* How many bytes to read in? Check cylL register */
+
+		if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 
+		    	USB_STOR_XFER_GOOD) {
+			return USB_STOR_TRANSPORT_ERROR;
+		}
+
+		if (len > 0xFF) { /* need to read cylH also */
+			len = *status;
+			if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) !=
+				    USB_STOR_XFER_GOOD) {
+				return USB_STOR_TRANSPORT_ERROR;
+			}
+			len += ((unsigned int) *status)<<8;
+		}
+		else
+			len = *status;
+
+
+		result = usbat_read_block(us, scsi_sglist(srb), len,
+			                                   scsi_sg_count(srb));
+	}
+
+	return result;
+}
+
+/*
+ * Transport for USBAT02-based CompactFlash and similar storage devices
+ */
+static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
+{
+	int rc;
+	struct usbat_info *info = (struct usbat_info *) (us->extra);
+	unsigned long block, blocks;
+	unsigned char *ptr = us->iobuf;
+	static unsigned char inquiry_response[36] = {
+		0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
+	};
+
+	if (srb->cmnd[0] == INQUIRY) {
+		usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
+		memcpy(ptr, inquiry_response, sizeof(inquiry_response));
+		fill_inquiry_response(us, ptr, 36);
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == READ_CAPACITY) {
+		rc = usbat_flash_check_media(us, info);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+
+		rc = usbat_flash_get_sector_count(us, info);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+
+		/* hard coded 512 byte sectors as per ATA spec */
+		info->ssize = 0x200;
+		usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
+			     info->sectors, info->ssize);
+
+		/*
+		 * build the reply
+		 * note: must return the sector number of the last sector,
+		 * *not* the total number of sectors
+		 */
+		((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
+		((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
+		usb_stor_set_xfer_buf(ptr, 8, srb);
+
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == MODE_SELECT_10) {
+		usb_stor_dbg(us, "Gah! MODE_SELECT_10\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	if (srb->cmnd[0] == READ_10) {
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+				((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+		usb_stor_dbg(us, "READ_10: read block 0x%04lx  count %ld\n",
+			     block, blocks);
+		return usbat_flash_read_data(us, info, block, blocks);
+	}
+
+	if (srb->cmnd[0] == READ_12) {
+		/*
+		 * I don't think we'll ever see a READ_12 but support it anyway
+		 */
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+		        ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+		         ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));
+
+		usb_stor_dbg(us, "READ_12: read block 0x%04lx  count %ld\n",
+			     block, blocks);
+		return usbat_flash_read_data(us, info, block, blocks);
+	}
+
+	if (srb->cmnd[0] == WRITE_10) {
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+		        ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+		usb_stor_dbg(us, "WRITE_10: write block 0x%04lx  count %ld\n",
+			     block, blocks);
+		return usbat_flash_write_data(us, info, block, blocks);
+	}
+
+	if (srb->cmnd[0] == WRITE_12) {
+		/*
+		 * I don't think we'll ever see a WRITE_12 but support it anyway
+		 */
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+		        ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+		         ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));
+
+		usb_stor_dbg(us, "WRITE_12: write block 0x%04lx  count %ld\n",
+			     block, blocks);
+		return usbat_flash_write_data(us, info, block, blocks);
+	}
+
+
+	if (srb->cmnd[0] == TEST_UNIT_READY) {
+		usb_stor_dbg(us, "TEST_UNIT_READY\n");
+
+		rc = usbat_flash_check_media(us, info);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+
+		return usbat_check_status(us);
+	}
+
+	if (srb->cmnd[0] == REQUEST_SENSE) {
+		usb_stor_dbg(us, "REQUEST_SENSE\n");
+
+		memset(ptr, 0, 18);
+		ptr[0] = 0xF0;
+		ptr[2] = info->sense_key;
+		ptr[7] = 11;
+		ptr[12] = info->sense_asc;
+		ptr[13] = info->sense_ascq;
+		usb_stor_set_xfer_buf(ptr, 18, srb);
+
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+		/*
+		 * sure.  whatever.  not like we can stop the user from popping
+		 * the media out of the device (no locking doors, etc)
+		 */
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
+		     srb->cmnd[0], srb->cmnd[0]);
+	info->sense_key = 0x05;
+	info->sense_asc = 0x20;
+	info->sense_ascq = 0x00;
+	return USB_STOR_TRANSPORT_FAILED;
+}
+
+static int init_usbat_cd(struct us_data *us)
+{
+	return init_usbat(us, USBAT_DEV_HP8200);
+}
+
+static int init_usbat_flash(struct us_data *us)
+{
+	return init_usbat(us, USBAT_DEV_FLASH);
+}
+
+static struct scsi_host_template usbat_host_template;
+
+static int usbat_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - usbat_usb_ids) + usbat_unusual_dev_list,
+			&usbat_host_template);
+	if (result)
+		return result;
+
+	/*
+	 * The actual transport will be determined later by the
+	 * initialization routine; this is just a placeholder.
+	 */
+	us->transport_name = "Shuttle USBAT";
+	us->transport = usbat_flash_transport;
+	us->transport_reset = usb_stor_CB_reset;
+	us->max_lun = 0;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver usbat_driver = {
+	.name =		DRV_NAME,
+	.probe =	usbat_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	usbat_usb_ids,
+	.soft_unbind =	1,
+	.no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(usbat_driver, usbat_host_template, DRV_NAME);
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
new file mode 100644
index 000000000..0774ba22f
--- /dev/null
+++ b/drivers/usb/storage/sierra_ms.c
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <linux/usb.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "scsiglue.h"
+#include "sierra_ms.h"
+#include "debug.h"
+
+#define SWIMS_USB_REQUEST_SetSwocMode	0x0B
+#define SWIMS_USB_REQUEST_GetSwocInfo	0x0A
+#define SWIMS_USB_INDEX_SetMode		0x0000
+#define SWIMS_SET_MODE_Modem		0x0001
+
+#define TRU_NORMAL 			0x01
+#define TRU_FORCE_MS 			0x02
+#define TRU_FORCE_MODEM 		0x03
+
+static unsigned int swi_tru_install = 1;
+module_param(swi_tru_install, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(swi_tru_install, "TRU-Install mode (1=Full Logic (def),"
+		 " 2=Force CD-Rom, 3=Force Modem)");
+
+struct swoc_info {
+	__u8 rev;
+	__u8 reserved[8];
+	__u16 LinuxSKU;
+	__u16 LinuxVer;
+	__u8 reserved2[47];
+} __attribute__((__packed__));
+
+static bool containsFullLinuxPackage(struct swoc_info *swocInfo)
+{
+	if ((swocInfo->LinuxSKU >= 0x2100 && swocInfo->LinuxSKU <= 0x2FFF) ||
+	   (swocInfo->LinuxSKU >= 0x7100 && swocInfo->LinuxSKU <= 0x7FFF))
+		return true;
+	else
+		return false;
+}
+
+static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode)
+{
+	int result;
+	dev_dbg(&udev->dev, "SWIMS: %s", "DEVICE MODE SWITCH\n");
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			SWIMS_USB_REQUEST_SetSwocMode,	/* __u8 request      */
+			USB_TYPE_VENDOR | USB_DIR_OUT,	/* __u8 request type */
+			eSWocMode,			/* __u16 value       */
+			0x0000,				/* __u16 index       */
+			NULL,				/* void *data        */
+			0,				/* __u16 size 	     */
+			USB_CTRL_SET_TIMEOUT);		/* int timeout       */
+	return result;
+}
+
+
+static int sierra_get_swoc_info(struct usb_device *udev,
+				struct swoc_info *swocInfo)
+{
+	int result;
+
+	dev_dbg(&udev->dev, "SWIMS: Attempting to get TRU-Install info\n");
+
+	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			SWIMS_USB_REQUEST_GetSwocInfo,	/* __u8 request      */
+			USB_TYPE_VENDOR | USB_DIR_IN,	/* __u8 request type */
+			0,				/* __u16 value       */
+			0,				/* __u16 index       */
+			(void *) swocInfo,		/* void *data        */
+			sizeof(struct swoc_info),	/* __u16 size 	     */
+			USB_CTRL_SET_TIMEOUT);		/* int timeout 	     */
+
+	swocInfo->LinuxSKU = le16_to_cpu(swocInfo->LinuxSKU);
+	swocInfo->LinuxVer = le16_to_cpu(swocInfo->LinuxVer);
+	return result;
+}
+
+static void debug_swoc(const struct device *dev, struct swoc_info *swocInfo)
+{
+	dev_dbg(dev, "SWIMS: SWoC Rev: %02d\n", swocInfo->rev);
+	dev_dbg(dev, "SWIMS: Linux SKU: %04X\n", swocInfo->LinuxSKU);
+	dev_dbg(dev, "SWIMS: Linux Version: %04X\n", swocInfo->LinuxVer);
+}
+
+
+static ssize_t truinst_show(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct swoc_info *swocInfo;
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *udev = interface_to_usbdev(intf);
+	int result;
+	if (swi_tru_install == TRU_FORCE_MS) {
+		result = snprintf(buf, PAGE_SIZE, "Forced Mass Storage\n");
+	} else {
+		swocInfo = kmalloc(sizeof(struct swoc_info), GFP_KERNEL);
+		if (!swocInfo) {
+			snprintf(buf, PAGE_SIZE, "Error\n");
+			return -ENOMEM;
+		}
+		result = sierra_get_swoc_info(udev, swocInfo);
+		if (result < 0) {
+			dev_dbg(dev, "SWIMS: failed SWoC query\n");
+			kfree(swocInfo);
+			snprintf(buf, PAGE_SIZE, "Error\n");
+			return -EIO;
+		}
+		debug_swoc(dev, swocInfo);
+		result = snprintf(buf, PAGE_SIZE,
+			"REV=%02d SKU=%04X VER=%04X\n",
+			swocInfo->rev,
+			swocInfo->LinuxSKU,
+			swocInfo->LinuxVer);
+		kfree(swocInfo);
+	}
+	return result;
+}
+static DEVICE_ATTR_RO(truinst);
+
+int sierra_ms_init(struct us_data *us)
+{
+	int result, retries;
+	struct swoc_info *swocInfo;
+	struct usb_device *udev;
+
+	udev = us->pusb_dev;
+
+	/* Force Modem mode */
+	if (swi_tru_install == TRU_FORCE_MODEM) {
+		usb_stor_dbg(us, "SWIMS: Forcing Modem Mode\n");
+		result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem);
+		if (result < 0)
+			usb_stor_dbg(us, "SWIMS: Failed to switch to modem mode\n");
+		return -EIO;
+	}
+	/* Force Mass Storage mode (keep CD-Rom) */
+	else if (swi_tru_install == TRU_FORCE_MS) {
+		usb_stor_dbg(us, "SWIMS: Forcing Mass Storage Mode\n");
+		goto complete;
+	}
+	/* Normal TRU-Install Logic */
+	else {
+		usb_stor_dbg(us, "SWIMS: Normal SWoC Logic\n");
+
+		swocInfo = kmalloc(sizeof(struct swoc_info),
+				GFP_KERNEL);
+		if (!swocInfo)
+			return -ENOMEM;
+
+		retries = 3;
+		do {
+			retries--;
+			result = sierra_get_swoc_info(udev, swocInfo);
+			if (result < 0) {
+				usb_stor_dbg(us, "SWIMS: Failed SWoC query\n");
+				schedule_timeout_uninterruptible(2*HZ);
+			}
+		} while (retries && result < 0);
+
+		if (result < 0) {
+			usb_stor_dbg(us, "SWIMS: Completely failed SWoC query\n");
+			kfree(swocInfo);
+			return -EIO;
+		}
+
+		debug_swoc(&us->pusb_dev->dev, swocInfo);
+
+		/*
+		 * If there is not Linux software on the TRU-Install device
+		 * then switch to modem mode
+		 */
+		if (!containsFullLinuxPackage(swocInfo)) {
+			usb_stor_dbg(us, "SWIMS: Switching to Modem Mode\n");
+			result = sierra_set_ms_mode(udev,
+				SWIMS_SET_MODE_Modem);
+			if (result < 0)
+				usb_stor_dbg(us, "SWIMS: Failed to switch modem\n");
+			kfree(swocInfo);
+			return -EIO;
+		}
+		kfree(swocInfo);
+	}
+complete:
+	return device_create_file(&us->pusb_intf->dev, &dev_attr_truinst);
+}
+
diff --git a/drivers/usb/storage/sierra_ms.h b/drivers/usb/storage/sierra_ms.h
new file mode 100644
index 000000000..3e9da537d
--- /dev/null
+++ b/drivers/usb/storage/sierra_ms.h
@@ -0,0 +1,5 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SIERRA_MS_H_
+#define _SIERRA_MS_H_
+extern int sierra_ms_init(struct us_data *us);
+#endif
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
new file mode 100644
index 000000000..7449e3790
--- /dev/null
+++ b/drivers/usb/storage/transport.c
@@ -0,0 +1,1450 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for USB Mass Storage compliant devices
+ *
+ * Current development and maintenance by:
+ *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Developed with the assistance of:
+ *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
+ *   (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov)
+ *   (c) 2002 Alan Stern <stern@rowland.org>
+ *
+ * Initial work by:
+ *   (c) 1999 Michael Gee (michael@linuxspecific.com)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices.  Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document.  The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ */
+
+#include <linux/sched.h>
+#include <linux/gfp.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+
+#include <linux/usb/quirks.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "scsiglue.h"
+#include "debug.h"
+
+#include <linux/blkdev.h>
+#include "../../scsi/sd.h"
+
+
+/***********************************************************************
+ * Data transfer routines
+ ***********************************************************************/
+
+/*
+ * This is subtle, so pay attention:
+ * ---------------------------------
+ * We're very concerned about races with a command abort.  Hanging this code
+ * is a sure fire way to hang the kernel.  (Note that this discussion applies
+ * only to transactions resulting from a scsi queued-command, since only
+ * these transactions are subject to a scsi abort.  Other transactions, such
+ * as those occurring during device-specific initialization, must be handled
+ * by a separate code path.)
+ *
+ * The abort function (usb_storage_command_abort() in scsiglue.c) first
+ * sets the machine state and the ABORTING bit in us->dflags to prevent
+ * new URBs from being submitted.  It then calls usb_stor_stop_transport()
+ * below, which atomically tests-and-clears the URB_ACTIVE bit in us->dflags
+ * to see if the current_urb needs to be stopped.  Likewise, the SG_ACTIVE
+ * bit is tested to see if the current_sg scatter-gather request needs to be
+ * stopped.  The timeout callback routine does much the same thing.
+ *
+ * When a disconnect occurs, the DISCONNECTING bit in us->dflags is set to
+ * prevent new URBs from being submitted, and usb_stor_stop_transport() is
+ * called to stop any ongoing requests.
+ *
+ * The submit function first verifies that the submitting is allowed
+ * (neither ABORTING nor DISCONNECTING bits are set) and that the submit
+ * completes without errors, and only then sets the URB_ACTIVE bit.  This
+ * prevents the stop_transport() function from trying to cancel the URB
+ * while the submit call is underway.  Next, the submit function must test
+ * the flags to see if an abort or disconnect occurred during the submission
+ * or before the URB_ACTIVE bit was set.  If so, it's essential to cancel
+ * the URB if it hasn't been cancelled already (i.e., if the URB_ACTIVE bit
+ * is still set).  Either way, the function must then wait for the URB to
+ * finish.  Note that the URB can still be in progress even after a call to
+ * usb_unlink_urb() returns.
+ *
+ * The idea is that (1) once the ABORTING or DISCONNECTING bit is set,
+ * either the stop_transport() function or the submitting function
+ * is guaranteed to call usb_unlink_urb() for an active URB,
+ * and (2) test_and_clear_bit() prevents usb_unlink_urb() from being
+ * called more than once or from being called during usb_submit_urb().
+ */
+
+/*
+ * This is the completion handler which will wake us up when an URB
+ * completes.
+ */
+static void usb_stor_blocking_completion(struct urb *urb)
+{
+	struct completion *urb_done_ptr = urb->context;
+
+	complete(urb_done_ptr);
+}
+
+/*
+ * This is the common part of the URB message submission code
+ *
+ * All URBs from the usb-storage driver involved in handling a queued scsi
+ * command _must_ pass through this function (or something like it) for the
+ * abort mechanisms to work properly.
+ */
+static int usb_stor_msg_common(struct us_data *us, int timeout)
+{
+	struct completion urb_done;
+	long timeleft;
+	int status;
+
+	/* don't submit URBs during abort processing */
+	if (test_bit(US_FLIDX_ABORTING, &us->dflags))
+		return -EIO;
+
+	/* set up data structures for the wakeup system */
+	init_completion(&urb_done);
+
+	/* fill the common fields in the URB */
+	us->current_urb->context = &urb_done;
+	us->current_urb->transfer_flags = 0;
+
+	/*
+	 * we assume that if transfer_buffer isn't us->iobuf then it
+	 * hasn't been mapped for DMA.  Yes, this is clunky, but it's
+	 * easier than always having the caller tell us whether the
+	 * transfer buffer has already been mapped.
+	 */
+	if (us->current_urb->transfer_buffer == us->iobuf)
+		us->current_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	us->current_urb->transfer_dma = us->iobuf_dma;
+
+	/* submit the URB */
+	status = usb_submit_urb(us->current_urb, GFP_NOIO);
+	if (status) {
+		/* something went wrong */
+		return status;
+	}
+
+	/*
+	 * since the URB has been submitted successfully, it's now okay
+	 * to cancel it
+	 */
+	set_bit(US_FLIDX_URB_ACTIVE, &us->dflags);
+
+	/* did an abort occur during the submission? */
+	if (test_bit(US_FLIDX_ABORTING, &us->dflags)) {
+
+		/* cancel the URB, if it hasn't been cancelled already */
+		if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) {
+			usb_stor_dbg(us, "-- cancelling URB\n");
+			usb_unlink_urb(us->current_urb);
+		}
+	}
+ 
+	/* wait for the completion of the URB */
+	timeleft = wait_for_completion_interruptible_timeout(
+			&urb_done, timeout ? : MAX_SCHEDULE_TIMEOUT);
+ 
+	clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags);
+
+	if (timeleft <= 0) {
+		usb_stor_dbg(us, "%s -- cancelling URB\n",
+			     timeleft == 0 ? "Timeout" : "Signal");
+		usb_kill_urb(us->current_urb);
+	}
+
+	/* return the URB status */
+	return us->current_urb->status;
+}
+
+/*
+ * Transfer one control message, with timeouts, and allowing early
+ * termination.  Return codes are usual -Exxx, *not* USB_STOR_XFER_xxx.
+ */
+int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
+		 u8 request, u8 requesttype, u16 value, u16 index, 
+		 void *data, u16 size, int timeout)
+{
+	int status;
+
+	usb_stor_dbg(us, "rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n",
+		     request, requesttype, value, index, size);
+
+	/* fill in the devrequest structure */
+	us->cr->bRequestType = requesttype;
+	us->cr->bRequest = request;
+	us->cr->wValue = cpu_to_le16(value);
+	us->cr->wIndex = cpu_to_le16(index);
+	us->cr->wLength = cpu_to_le16(size);
+
+	/* fill and submit the URB */
+	usb_fill_control_urb(us->current_urb, us->pusb_dev, pipe, 
+			 (unsigned char*) us->cr, data, size, 
+			 usb_stor_blocking_completion, NULL);
+	status = usb_stor_msg_common(us, timeout);
+
+	/* return the actual length of the data transferred if no error */
+	if (status == 0)
+		status = us->current_urb->actual_length;
+	return status;
+}
+EXPORT_SYMBOL_GPL(usb_stor_control_msg);
+
+/*
+ * This is a version of usb_clear_halt() that allows early termination and
+ * doesn't read the status from the device -- this is because some devices
+ * crash their internal firmware when the status is requested after a halt.
+ *
+ * A definitive list of these 'bad' devices is too difficult to maintain or
+ * make complete enough to be useful.  This problem was first observed on the
+ * Hagiwara FlashGate DUAL unit.  However, bus traces reveal that neither
+ * MacOS nor Windows checks the status after clearing a halt.
+ *
+ * Since many vendors in this space limit their testing to interoperability
+ * with these two OSes, specification violations like this one are common.
+ */
+int usb_stor_clear_halt(struct us_data *us, unsigned int pipe)
+{
+	int result;
+	int endp = usb_pipeendpoint(pipe);
+
+	if (usb_pipein (pipe))
+		endp |= USB_DIR_IN;
+
+	result = usb_stor_control_msg(us, us->send_ctrl_pipe,
+		USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT,
+		USB_ENDPOINT_HALT, endp,
+		NULL, 0, 3*HZ);
+
+	if (result >= 0)
+		usb_reset_endpoint(us->pusb_dev, endp);
+
+	usb_stor_dbg(us, "result = %d\n", result);
+	return result;
+}
+EXPORT_SYMBOL_GPL(usb_stor_clear_halt);
+
+
+/*
+ * Interpret the results of a URB transfer
+ *
+ * This function prints appropriate debugging messages, clears halts on
+ * non-control endpoints, and translates the status to the corresponding
+ * USB_STOR_XFER_xxx return code.
+ */
+static int interpret_urb_result(struct us_data *us, unsigned int pipe,
+		unsigned int length, int result, unsigned int partial)
+{
+	usb_stor_dbg(us, "Status code %d; transferred %u/%u\n",
+		     result, partial, length);
+	switch (result) {
+
+	/* no error code; did we send all the data? */
+	case 0:
+		if (partial != length) {
+			usb_stor_dbg(us, "-- short transfer\n");
+			return USB_STOR_XFER_SHORT;
+		}
+
+		usb_stor_dbg(us, "-- transfer complete\n");
+		return USB_STOR_XFER_GOOD;
+
+	/* stalled */
+	case -EPIPE:
+		/*
+		 * for control endpoints, (used by CB[I]) a stall indicates
+		 * a failed command
+		 */
+		if (usb_pipecontrol(pipe)) {
+			usb_stor_dbg(us, "-- stall on control pipe\n");
+			return USB_STOR_XFER_STALLED;
+		}
+
+		/* for other sorts of endpoint, clear the stall */
+		usb_stor_dbg(us, "clearing endpoint halt for pipe 0x%x\n",
+			     pipe);
+		if (usb_stor_clear_halt(us, pipe) < 0)
+			return USB_STOR_XFER_ERROR;
+		return USB_STOR_XFER_STALLED;
+
+	/* babble - the device tried to send more than we wanted to read */
+	case -EOVERFLOW:
+		usb_stor_dbg(us, "-- babble\n");
+		return USB_STOR_XFER_LONG;
+
+	/* the transfer was cancelled by abort, disconnect, or timeout */
+	case -ECONNRESET:
+		usb_stor_dbg(us, "-- transfer cancelled\n");
+		return USB_STOR_XFER_ERROR;
+
+	/* short scatter-gather read transfer */
+	case -EREMOTEIO:
+		usb_stor_dbg(us, "-- short read transfer\n");
+		return USB_STOR_XFER_SHORT;
+
+	/* abort or disconnect in progress */
+	case -EIO:
+		usb_stor_dbg(us, "-- abort or disconnect in progress\n");
+		return USB_STOR_XFER_ERROR;
+
+	/* the catch-all error case */
+	default:
+		usb_stor_dbg(us, "-- unknown error\n");
+		return USB_STOR_XFER_ERROR;
+	}
+}
+
+/*
+ * Transfer one control message, without timeouts, but allowing early
+ * termination.  Return codes are USB_STOR_XFER_xxx.
+ */
+int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe,
+		u8 request, u8 requesttype, u16 value, u16 index,
+		void *data, u16 size)
+{
+	int result;
+
+	usb_stor_dbg(us, "rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n",
+		     request, requesttype, value, index, size);
+
+	/* fill in the devrequest structure */
+	us->cr->bRequestType = requesttype;
+	us->cr->bRequest = request;
+	us->cr->wValue = cpu_to_le16(value);
+	us->cr->wIndex = cpu_to_le16(index);
+	us->cr->wLength = cpu_to_le16(size);
+
+	/* fill and submit the URB */
+	usb_fill_control_urb(us->current_urb, us->pusb_dev, pipe, 
+			 (unsigned char*) us->cr, data, size, 
+			 usb_stor_blocking_completion, NULL);
+	result = usb_stor_msg_common(us, 0);
+
+	return interpret_urb_result(us, pipe, size, result,
+			us->current_urb->actual_length);
+}
+EXPORT_SYMBOL_GPL(usb_stor_ctrl_transfer);
+
+/*
+ * Receive one interrupt buffer, without timeouts, but allowing early
+ * termination.  Return codes are USB_STOR_XFER_xxx.
+ *
+ * This routine always uses us->recv_intr_pipe as the pipe and
+ * us->ep_bInterval as the interrupt interval.
+ */
+static int usb_stor_intr_transfer(struct us_data *us, void *buf,
+				  unsigned int length)
+{
+	int result;
+	unsigned int pipe = us->recv_intr_pipe;
+	unsigned int maxp;
+
+	usb_stor_dbg(us, "xfer %u bytes\n", length);
+
+	/* calculate the max packet size */
+	maxp = usb_maxpacket(us->pusb_dev, pipe);
+	if (maxp > length)
+		maxp = length;
+
+	/* fill and submit the URB */
+	usb_fill_int_urb(us->current_urb, us->pusb_dev, pipe, buf,
+			maxp, usb_stor_blocking_completion, NULL,
+			us->ep_bInterval);
+	result = usb_stor_msg_common(us, 0);
+
+	return interpret_urb_result(us, pipe, length, result,
+			us->current_urb->actual_length);
+}
+
+/*
+ * Transfer one buffer via bulk pipe, without timeouts, but allowing early
+ * termination.  Return codes are USB_STOR_XFER_xxx.  If the bulk pipe
+ * stalls during the transfer, the halt is automatically cleared.
+ */
+int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
+	void *buf, unsigned int length, unsigned int *act_len)
+{
+	int result;
+
+	usb_stor_dbg(us, "xfer %u bytes\n", length);
+
+	/* fill and submit the URB */
+	usb_fill_bulk_urb(us->current_urb, us->pusb_dev, pipe, buf, length,
+		      usb_stor_blocking_completion, NULL);
+	result = usb_stor_msg_common(us, 0);
+
+	/* store the actual length of the data transferred */
+	if (act_len)
+		*act_len = us->current_urb->actual_length;
+	return interpret_urb_result(us, pipe, length, result, 
+			us->current_urb->actual_length);
+}
+EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_buf);
+
+/*
+ * Transfer a scatter-gather list via bulk transfer
+ *
+ * This function does basically the same thing as usb_stor_bulk_transfer_buf()
+ * above, but it uses the usbcore scatter-gather library.
+ */
+static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
+		struct scatterlist *sg, int num_sg, unsigned int length,
+		unsigned int *act_len)
+{
+	int result;
+
+	/* don't submit s-g requests during abort processing */
+	if (test_bit(US_FLIDX_ABORTING, &us->dflags))
+		goto usb_stor_xfer_error;
+
+	/* initialize the scatter-gather request block */
+	usb_stor_dbg(us, "xfer %u bytes, %d entries\n", length, num_sg);
+	result = usb_sg_init(&us->current_sg, us->pusb_dev, pipe, 0,
+			sg, num_sg, length, GFP_NOIO);
+	if (result) {
+		usb_stor_dbg(us, "usb_sg_init returned %d\n", result);
+		goto usb_stor_xfer_error;
+	}
+
+	/*
+	 * since the block has been initialized successfully, it's now
+	 * okay to cancel it
+	 */
+	set_bit(US_FLIDX_SG_ACTIVE, &us->dflags);
+
+	/* did an abort occur during the submission? */
+	if (test_bit(US_FLIDX_ABORTING, &us->dflags)) {
+
+		/* cancel the request, if it hasn't been cancelled already */
+		if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) {
+			usb_stor_dbg(us, "-- cancelling sg request\n");
+			usb_sg_cancel(&us->current_sg);
+		}
+	}
+
+	/* wait for the completion of the transfer */
+	usb_sg_wait(&us->current_sg);
+	clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags);
+
+	result = us->current_sg.status;
+	if (act_len)
+		*act_len = us->current_sg.bytes;
+	return interpret_urb_result(us, pipe, length, result,
+			us->current_sg.bytes);
+
+usb_stor_xfer_error:
+	if (act_len)
+		*act_len = 0;
+	return USB_STOR_XFER_ERROR;
+}
+
+/*
+ * Common used function. Transfer a complete command
+ * via usb_stor_bulk_transfer_sglist() above. Set cmnd resid
+ */
+int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
+		      struct scsi_cmnd* srb)
+{
+	unsigned int partial;
+	int result = usb_stor_bulk_transfer_sglist(us, pipe, scsi_sglist(srb),
+				      scsi_sg_count(srb), scsi_bufflen(srb),
+				      &partial);
+
+	scsi_set_resid(srb, scsi_bufflen(srb) - partial);
+	return result;
+}
+EXPORT_SYMBOL_GPL(usb_stor_bulk_srb);
+
+/*
+ * Transfer an entire SCSI command's worth of data payload over the bulk
+ * pipe.
+ *
+ * Note that this uses usb_stor_bulk_transfer_buf() and
+ * usb_stor_bulk_transfer_sglist() to achieve its goals --
+ * this function simply determines whether we're going to use
+ * scatter-gather or not, and acts appropriately.
+ */
+int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe,
+		void *buf, unsigned int length_left, int use_sg, int *residual)
+{
+	int result;
+	unsigned int partial;
+
+	/* are we scatter-gathering? */
+	if (use_sg) {
+		/* use the usb core scatter-gather primitives */
+		result = usb_stor_bulk_transfer_sglist(us, pipe,
+				(struct scatterlist *) buf, use_sg,
+				length_left, &partial);
+		length_left -= partial;
+	} else {
+		/* no scatter-gather, just make the request */
+		result = usb_stor_bulk_transfer_buf(us, pipe, buf, 
+				length_left, &partial);
+		length_left -= partial;
+	}
+
+	/* store the residual and return the error code */
+	if (residual)
+		*residual = length_left;
+	return result;
+}
+EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_sg);
+
+/***********************************************************************
+ * Transport routines
+ ***********************************************************************/
+
+/*
+ * There are so many devices that report the capacity incorrectly,
+ * this routine was written to counteract some of the resulting
+ * problems.
+ */
+static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb)
+{
+	struct gendisk *disk;
+	struct scsi_disk *sdkp;
+	u32 sector;
+
+	/* To Report "Medium Error: Record Not Found */
+	static unsigned char record_not_found[18] = {
+		[0]	= 0x70,			/* current error */
+		[2]	= MEDIUM_ERROR,		/* = 0x03 */
+		[7]	= 0x0a,			/* additional length */
+		[12]	= 0x14			/* Record Not Found */
+	};
+
+	/*
+	 * If last-sector problems can't occur, whether because the
+	 * capacity was already decremented or because the device is
+	 * known to report the correct capacity, then we don't need
+	 * to do anything.
+	 */
+	if (!us->use_last_sector_hacks)
+		return;
+
+	/* Was this command a READ(10) or a WRITE(10)? */
+	if (srb->cmnd[0] != READ_10 && srb->cmnd[0] != WRITE_10)
+		goto done;
+
+	/* Did this command access the last sector? */
+	sector = (srb->cmnd[2] << 24) | (srb->cmnd[3] << 16) |
+			(srb->cmnd[4] << 8) | (srb->cmnd[5]);
+	disk = scsi_cmd_to_rq(srb)->q->disk;
+	if (!disk)
+		goto done;
+	sdkp = scsi_disk(disk);
+	if (!sdkp)
+		goto done;
+	if (sector + 1 != sdkp->capacity)
+		goto done;
+
+	if (srb->result == SAM_STAT_GOOD && scsi_get_resid(srb) == 0) {
+
+		/*
+		 * The command succeeded.  We know this device doesn't
+		 * have the last-sector bug, so stop checking it.
+		 */
+		us->use_last_sector_hacks = 0;
+
+	} else {
+		/*
+		 * The command failed.  Allow up to 3 retries in case this
+		 * is some normal sort of failure.  After that, assume the
+		 * capacity is wrong and we're trying to access the sector
+		 * beyond the end.  Replace the result code and sense data
+		 * with values that will cause the SCSI core to fail the
+		 * command immediately, instead of going into an infinite
+		 * (or even just a very long) retry loop.
+		 */
+		if (++us->last_sector_retries < 3)
+			return;
+		srb->result = SAM_STAT_CHECK_CONDITION;
+		memcpy(srb->sense_buffer, record_not_found,
+				sizeof(record_not_found));
+	}
+
+ done:
+	/*
+	 * Don't reset the retry counter for TEST UNIT READY commands,
+	 * because they get issued after device resets which might be
+	 * caused by a failed last-sector access.
+	 */
+	if (srb->cmnd[0] != TEST_UNIT_READY)
+		us->last_sector_retries = 0;
+}
+
+/*
+ * Invoke the transport and basic error-handling/recovery methods
+ *
+ * This is used by the protocol layers to actually send the message to
+ * the device and receive the response.
+ */
+void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	int need_auto_sense;
+	int result;
+
+	/* send the command to the transport layer */
+	scsi_set_resid(srb, 0);
+	result = us->transport(srb, us);
+
+	/*
+	 * if the command gets aborted by the higher layers, we need to
+	 * short-circuit all other processing
+	 */
+	if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
+		usb_stor_dbg(us, "-- command was aborted\n");
+		srb->result = DID_ABORT << 16;
+		goto Handle_Errors;
+	}
+
+	/* if there is a transport error, reset and don't auto-sense */
+	if (result == USB_STOR_TRANSPORT_ERROR) {
+		usb_stor_dbg(us, "-- transport indicates error, resetting\n");
+		srb->result = DID_ERROR << 16;
+		goto Handle_Errors;
+	}
+
+	/* if the transport provided its own sense data, don't auto-sense */
+	if (result == USB_STOR_TRANSPORT_NO_SENSE) {
+		srb->result = SAM_STAT_CHECK_CONDITION;
+		last_sector_hacks(us, srb);
+		return;
+	}
+
+	srb->result = SAM_STAT_GOOD;
+
+	/*
+	 * Determine if we need to auto-sense
+	 *
+	 * I normally don't use a flag like this, but it's almost impossible
+	 * to understand what's going on here if I don't.
+	 */
+	need_auto_sense = 0;
+
+	/*
+	 * If we're running the CB transport, which is incapable
+	 * of determining status on its own, we will auto-sense
+	 * unless the operation involved a data-in transfer.  Devices
+	 * can signal most data-in errors by stalling the bulk-in pipe.
+	 */
+	if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_DPCM_USB) &&
+			srb->sc_data_direction != DMA_FROM_DEVICE) {
+		usb_stor_dbg(us, "-- CB transport device requiring auto-sense\n");
+		need_auto_sense = 1;
+	}
+
+	/* Some devices (Kindle) require another command after SYNC CACHE */
+	if ((us->fflags & US_FL_SENSE_AFTER_SYNC) &&
+			srb->cmnd[0] == SYNCHRONIZE_CACHE) {
+		usb_stor_dbg(us, "-- sense after SYNC CACHE\n");
+		need_auto_sense = 1;
+	}
+
+	/*
+	 * If we have a failure, we're going to do a REQUEST_SENSE 
+	 * automatically.  Note that we differentiate between a command
+	 * "failure" and an "error" in the transport mechanism.
+	 */
+	if (result == USB_STOR_TRANSPORT_FAILED) {
+		usb_stor_dbg(us, "-- transport indicates command failure\n");
+		need_auto_sense = 1;
+	}
+
+	/*
+	 * Determine if this device is SAT by seeing if the
+	 * command executed successfully.  Otherwise we'll have
+	 * to wait for at least one CHECK_CONDITION to determine
+	 * SANE_SENSE support
+	 */
+	if (unlikely((srb->cmnd[0] == ATA_16 || srb->cmnd[0] == ATA_12) &&
+	    result == USB_STOR_TRANSPORT_GOOD &&
+	    !(us->fflags & US_FL_SANE_SENSE) &&
+	    !(us->fflags & US_FL_BAD_SENSE) &&
+	    !(srb->cmnd[2] & 0x20))) {
+		usb_stor_dbg(us, "-- SAT supported, increasing auto-sense\n");
+		us->fflags |= US_FL_SANE_SENSE;
+	}
+
+	/*
+	 * A short transfer on a command where we don't expect it
+	 * is unusual, but it doesn't mean we need to auto-sense.
+	 */
+	if ((scsi_get_resid(srb) > 0) &&
+	    !((srb->cmnd[0] == REQUEST_SENSE) ||
+	      (srb->cmnd[0] == INQUIRY) ||
+	      (srb->cmnd[0] == MODE_SENSE) ||
+	      (srb->cmnd[0] == LOG_SENSE) ||
+	      (srb->cmnd[0] == MODE_SENSE_10))) {
+		usb_stor_dbg(us, "-- unexpectedly short transfer\n");
+	}
+
+	/* Now, if we need to do the auto-sense, let's do it */
+	if (need_auto_sense) {
+		int temp_result;
+		struct scsi_eh_save ses;
+		int sense_size = US_SENSE_SIZE;
+		struct scsi_sense_hdr sshdr;
+		const u8 *scdd;
+		u8 fm_ili;
+
+		/* device supports and needs bigger sense buffer */
+		if (us->fflags & US_FL_SANE_SENSE)
+			sense_size = ~0;
+Retry_Sense:
+		usb_stor_dbg(us, "Issuing auto-REQUEST_SENSE\n");
+
+		scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sense_size);
+
+		/* FIXME: we must do the protocol translation here */
+		if (us->subclass == USB_SC_RBC || us->subclass == USB_SC_SCSI ||
+				us->subclass == USB_SC_CYP_ATACB)
+			srb->cmd_len = 6;
+		else
+			srb->cmd_len = 12;
+
+		/* issue the auto-sense command */
+		scsi_set_resid(srb, 0);
+		temp_result = us->transport(us->srb, us);
+
+		/* let's clean up right away */
+		scsi_eh_restore_cmnd(srb, &ses);
+
+		if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
+			usb_stor_dbg(us, "-- auto-sense aborted\n");
+			srb->result = DID_ABORT << 16;
+
+			/* If SANE_SENSE caused this problem, disable it */
+			if (sense_size != US_SENSE_SIZE) {
+				us->fflags &= ~US_FL_SANE_SENSE;
+				us->fflags |= US_FL_BAD_SENSE;
+			}
+			goto Handle_Errors;
+		}
+
+		/*
+		 * Some devices claim to support larger sense but fail when
+		 * trying to request it. When a transport failure happens
+		 * using US_FS_SANE_SENSE, we always retry with a standard
+		 * (small) sense request. This fixes some USB GSM modems
+		 */
+		if (temp_result == USB_STOR_TRANSPORT_FAILED &&
+				sense_size != US_SENSE_SIZE) {
+			usb_stor_dbg(us, "-- auto-sense failure, retry small sense\n");
+			sense_size = US_SENSE_SIZE;
+			us->fflags &= ~US_FL_SANE_SENSE;
+			us->fflags |= US_FL_BAD_SENSE;
+			goto Retry_Sense;
+		}
+
+		/* Other failures */
+		if (temp_result != USB_STOR_TRANSPORT_GOOD) {
+			usb_stor_dbg(us, "-- auto-sense failure\n");
+
+			/*
+			 * we skip the reset if this happens to be a
+			 * multi-target device, since failure of an
+			 * auto-sense is perfectly valid
+			 */
+			srb->result = DID_ERROR << 16;
+			if (!(us->fflags & US_FL_SCM_MULT_TARG))
+				goto Handle_Errors;
+			return;
+		}
+
+		/*
+		 * If the sense data returned is larger than 18-bytes then we
+		 * assume this device supports requesting more in the future.
+		 * The response code must be 70h through 73h inclusive.
+		 */
+		if (srb->sense_buffer[7] > (US_SENSE_SIZE - 8) &&
+		    !(us->fflags & US_FL_SANE_SENSE) &&
+		    !(us->fflags & US_FL_BAD_SENSE) &&
+		    (srb->sense_buffer[0] & 0x7C) == 0x70) {
+			usb_stor_dbg(us, "-- SANE_SENSE support enabled\n");
+			us->fflags |= US_FL_SANE_SENSE;
+
+			/*
+			 * Indicate to the user that we truncated their sense
+			 * because we didn't know it supported larger sense.
+			 */
+			usb_stor_dbg(us, "-- Sense data truncated to %i from %i\n",
+				     US_SENSE_SIZE,
+				     srb->sense_buffer[7] + 8);
+			srb->sense_buffer[7] = (US_SENSE_SIZE - 8);
+		}
+
+		scsi_normalize_sense(srb->sense_buffer, SCSI_SENSE_BUFFERSIZE,
+				     &sshdr);
+
+		usb_stor_dbg(us, "-- Result from auto-sense is %d\n",
+			     temp_result);
+		usb_stor_dbg(us, "-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n",
+			     sshdr.response_code, sshdr.sense_key,
+			     sshdr.asc, sshdr.ascq);
+#ifdef CONFIG_USB_STORAGE_DEBUG
+		usb_stor_show_sense(us, sshdr.sense_key, sshdr.asc, sshdr.ascq);
+#endif
+
+		/* set the result so the higher layers expect this data */
+		srb->result = SAM_STAT_CHECK_CONDITION;
+
+		scdd = scsi_sense_desc_find(srb->sense_buffer,
+					    SCSI_SENSE_BUFFERSIZE, 4);
+		fm_ili = (scdd ? scdd[3] : srb->sense_buffer[2]) & 0xA0;
+
+		/*
+		 * We often get empty sense data.  This could indicate that
+		 * everything worked or that there was an unspecified
+		 * problem.  We have to decide which.
+		 */
+		if (sshdr.sense_key == 0 && sshdr.asc == 0 && sshdr.ascq == 0 &&
+		    fm_ili == 0) {
+			/*
+			 * If things are really okay, then let's show that.
+			 * Zero out the sense buffer so the higher layers
+			 * won't realize we did an unsolicited auto-sense.
+			 */
+			if (result == USB_STOR_TRANSPORT_GOOD) {
+				srb->result = SAM_STAT_GOOD;
+				srb->sense_buffer[0] = 0x0;
+			}
+
+			/*
+			 * ATA-passthru commands use sense data to report
+			 * the command completion status, and often devices
+			 * return Check Condition status when nothing is
+			 * wrong.
+			 */
+			else if (srb->cmnd[0] == ATA_16 ||
+					srb->cmnd[0] == ATA_12) {
+				/* leave the data alone */
+			}
+
+			/*
+			 * If there was a problem, report an unspecified
+			 * hardware error to prevent the higher layers from
+			 * entering an infinite retry loop.
+			 */
+			else {
+				srb->result = DID_ERROR << 16;
+				if ((sshdr.response_code & 0x72) == 0x72)
+					srb->sense_buffer[1] = HARDWARE_ERROR;
+				else
+					srb->sense_buffer[2] = HARDWARE_ERROR;
+			}
+		}
+	}
+
+	/*
+	 * Some devices don't work or return incorrect data the first
+	 * time they get a READ(10) command, or for the first READ(10)
+	 * after a media change.  If the INITIAL_READ10 flag is set,
+	 * keep track of whether READ(10) commands succeed.  If the
+	 * previous one succeeded and this one failed, set the REDO_READ10
+	 * flag to force a retry.
+	 */
+	if (unlikely((us->fflags & US_FL_INITIAL_READ10) &&
+			srb->cmnd[0] == READ_10)) {
+		if (srb->result == SAM_STAT_GOOD) {
+			set_bit(US_FLIDX_READ10_WORKED, &us->dflags);
+		} else if (test_bit(US_FLIDX_READ10_WORKED, &us->dflags)) {
+			clear_bit(US_FLIDX_READ10_WORKED, &us->dflags);
+			set_bit(US_FLIDX_REDO_READ10, &us->dflags);
+		}
+
+		/*
+		 * Next, if the REDO_READ10 flag is set, return a result
+		 * code that will cause the SCSI core to retry the READ(10)
+		 * command immediately.
+		 */
+		if (test_bit(US_FLIDX_REDO_READ10, &us->dflags)) {
+			clear_bit(US_FLIDX_REDO_READ10, &us->dflags);
+			srb->result = DID_IMM_RETRY << 16;
+			srb->sense_buffer[0] = 0;
+		}
+	}
+
+	/* Did we transfer less than the minimum amount required? */
+	if ((srb->result == SAM_STAT_GOOD || srb->sense_buffer[2] == 0) &&
+			scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow)
+		srb->result = DID_ERROR << 16;
+
+	last_sector_hacks(us, srb);
+	return;
+
+	/*
+	 * Error and abort processing: try to resynchronize with the device
+	 * by issuing a port reset.  If that fails, try a class-specific
+	 * device reset.
+	 */
+  Handle_Errors:
+
+	/*
+	 * Set the RESETTING bit, and clear the ABORTING bit so that
+	 * the reset may proceed.
+	 */
+	scsi_lock(us_to_host(us));
+	set_bit(US_FLIDX_RESETTING, &us->dflags);
+	clear_bit(US_FLIDX_ABORTING, &us->dflags);
+	scsi_unlock(us_to_host(us));
+
+	/*
+	 * We must release the device lock because the pre_reset routine
+	 * will want to acquire it.
+	 */
+	mutex_unlock(&us->dev_mutex);
+	result = usb_stor_port_reset(us);
+	mutex_lock(&us->dev_mutex);
+
+	if (result < 0) {
+		scsi_lock(us_to_host(us));
+		usb_stor_report_device_reset(us);
+		scsi_unlock(us_to_host(us));
+		us->transport_reset(us);
+	}
+	clear_bit(US_FLIDX_RESETTING, &us->dflags);
+	last_sector_hacks(us, srb);
+}
+
+/* Stop the current URB transfer */
+void usb_stor_stop_transport(struct us_data *us)
+{
+	/*
+	 * If the state machine is blocked waiting for an URB,
+	 * let's wake it up.  The test_and_clear_bit() call
+	 * guarantees that if a URB has just been submitted,
+	 * it won't be cancelled more than once.
+	 */
+	if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) {
+		usb_stor_dbg(us, "-- cancelling URB\n");
+		usb_unlink_urb(us->current_urb);
+	}
+
+	/* If we are waiting for a scatter-gather operation, cancel it. */
+	if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) {
+		usb_stor_dbg(us, "-- cancelling sg request\n");
+		usb_sg_cancel(&us->current_sg);
+	}
+}
+
+/*
+ * Control/Bulk and Control/Bulk/Interrupt transport
+ */
+
+int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	unsigned int transfer_length = scsi_bufflen(srb);
+	unsigned int pipe = 0;
+	int result;
+
+	/* COMMAND STAGE */
+	/* let's send the command via the control pipe */
+	/*
+	 * Command is sometime (f.e. after scsi_eh_prep_cmnd) on the stack.
+	 * Stack may be vmallocated.  So no DMA for us.  Make a copy.
+	 */
+	memcpy(us->iobuf, srb->cmnd, srb->cmd_len);
+	result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+				      US_CBI_ADSC, 
+				      USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, 
+				      us->ifnum, us->iobuf, srb->cmd_len);
+
+	/* check the return code for the command */
+	usb_stor_dbg(us, "Call to usb_stor_ctrl_transfer() returned %d\n",
+		     result);
+
+	/* if we stalled the command, it means command failed */
+	if (result == USB_STOR_XFER_STALLED) {
+		return USB_STOR_TRANSPORT_FAILED;
+	}
+
+	/* Uh oh... serious problem here */
+	if (result != USB_STOR_XFER_GOOD) {
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/* DATA STAGE */
+	/* transfer the data payload for this command, if one exists*/
+	if (transfer_length) {
+		pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? 
+				us->recv_bulk_pipe : us->send_bulk_pipe;
+		result = usb_stor_bulk_srb(us, pipe, srb);
+		usb_stor_dbg(us, "CBI data stage result is 0x%x\n", result);
+
+		/* if we stalled the data transfer it means command failed */
+		if (result == USB_STOR_XFER_STALLED)
+			return USB_STOR_TRANSPORT_FAILED;
+		if (result > USB_STOR_XFER_STALLED)
+			return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/* STATUS STAGE */
+
+	/*
+	 * NOTE: CB does not have a status stage.  Silly, I know.  So
+	 * we have to catch this at a higher level.
+	 */
+	if (us->protocol != USB_PR_CBI)
+		return USB_STOR_TRANSPORT_GOOD;
+
+	result = usb_stor_intr_transfer(us, us->iobuf, 2);
+	usb_stor_dbg(us, "Got interrupt data (0x%x, 0x%x)\n",
+		     us->iobuf[0], us->iobuf[1]);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/*
+	 * UFI gives us ASC and ASCQ, like a request sense
+	 *
+	 * REQUEST_SENSE and INQUIRY don't affect the sense data on UFI
+	 * devices, so we ignore the information for those commands.  Note
+	 * that this means we could be ignoring a real error on these
+	 * commands, but that can't be helped.
+	 */
+	if (us->subclass == USB_SC_UFI) {
+		if (srb->cmnd[0] == REQUEST_SENSE ||
+		    srb->cmnd[0] == INQUIRY)
+			return USB_STOR_TRANSPORT_GOOD;
+		if (us->iobuf[0])
+			goto Failed;
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	/*
+	 * If not UFI, we interpret the data as a result code 
+	 * The first byte should always be a 0x0.
+	 *
+	 * Some bogus devices don't follow that rule.  They stuff the ASC
+	 * into the first byte -- so if it's non-zero, call it a failure.
+	 */
+	if (us->iobuf[0]) {
+		usb_stor_dbg(us, "CBI IRQ data showed reserved bType 0x%x\n",
+			     us->iobuf[0]);
+		goto Failed;
+
+	}
+
+	/* The second byte & 0x0F should be 0x0 for good, otherwise error */
+	switch (us->iobuf[1] & 0x0F) {
+		case 0x00: 
+			return USB_STOR_TRANSPORT_GOOD;
+		case 0x01: 
+			goto Failed;
+	}
+	return USB_STOR_TRANSPORT_ERROR;
+
+	/*
+	 * the CBI spec requires that the bulk pipe must be cleared
+	 * following any data-in/out command failure (section 2.4.3.1.3)
+	 */
+  Failed:
+	if (pipe)
+		usb_stor_clear_halt(us, pipe);
+	return USB_STOR_TRANSPORT_FAILED;
+}
+EXPORT_SYMBOL_GPL(usb_stor_CB_transport);
+
+/*
+ * Bulk only transport
+ */
+
+/* Determine what the maximum LUN supported is */
+int usb_stor_Bulk_max_lun(struct us_data *us)
+{
+	int result;
+
+	/* issue the command */
+	us->iobuf[0] = 0;
+	result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
+				 US_BULK_GET_MAX_LUN, 
+				 USB_DIR_IN | USB_TYPE_CLASS | 
+				 USB_RECIP_INTERFACE,
+				 0, us->ifnum, us->iobuf, 1, 10*HZ);
+
+	usb_stor_dbg(us, "GetMaxLUN command result is %d, data is %d\n",
+		     result, us->iobuf[0]);
+
+	/*
+	 * If we have a successful request, return the result if valid. The
+	 * CBW LUN field is 4 bits wide, so the value reported by the device
+	 * should fit into that.
+	 */
+	if (result > 0) {
+		if (us->iobuf[0] < 16) {
+			return us->iobuf[0];
+		} else {
+			dev_info(&us->pusb_intf->dev,
+				 "Max LUN %d is not valid, using 0 instead",
+				 us->iobuf[0]);
+		}
+	}
+
+	/*
+	 * Some devices don't like GetMaxLUN.  They may STALL the control
+	 * pipe, they may return a zero-length result, they may do nothing at
+	 * all and timeout, or they may fail in even more bizarrely creative
+	 * ways.  In these cases the best approach is to use the default
+	 * value: only one LUN.
+	 */
+	return 0;
+}
+
+int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf;
+	unsigned int transfer_length = scsi_bufflen(srb);
+	unsigned int residue;
+	int result;
+	int fake_sense = 0;
+	unsigned int cswlen;
+	unsigned int cbwlen = US_BULK_CB_WRAP_LEN;
+
+	/* Take care of BULK32 devices; set extra byte to 0 */
+	if (unlikely(us->fflags & US_FL_BULK32)) {
+		cbwlen = 32;
+		us->iobuf[31] = 0;
+	}
+
+	/* set up the command wrapper */
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = cpu_to_le32(transfer_length);
+	bcb->Flags = srb->sc_data_direction == DMA_FROM_DEVICE ?
+		US_BULK_FLAG_IN : 0;
+	bcb->Tag = ++us->tag;
+	bcb->Lun = srb->device->lun;
+	if (us->fflags & US_FL_SCM_MULT_TARG)
+		bcb->Lun |= srb->device->id << 4;
+	bcb->Length = srb->cmd_len;
+
+	/* copy the command payload */
+	memset(bcb->CDB, 0, sizeof(bcb->CDB));
+	memcpy(bcb->CDB, srb->cmnd, bcb->Length);
+
+	/* send it to out endpoint */
+	usb_stor_dbg(us, "Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n",
+		     le32_to_cpu(bcb->Signature), bcb->Tag,
+		     le32_to_cpu(bcb->DataTransferLength), bcb->Flags,
+		     (bcb->Lun >> 4), (bcb->Lun & 0x0F),
+		     bcb->Length);
+	result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+				bcb, cbwlen, NULL);
+	usb_stor_dbg(us, "Bulk command transfer result=%d\n", result);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/* DATA STAGE */
+	/* send/receive data payload, if there is any */
+
+	/*
+	 * Some USB-IDE converter chips need a 100us delay between the
+	 * command phase and the data phase.  Some devices need a little
+	 * more than that, probably because of clock rate inaccuracies.
+	 */
+	if (unlikely(us->fflags & US_FL_GO_SLOW))
+		usleep_range(125, 150);
+
+	if (transfer_length) {
+		unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? 
+				us->recv_bulk_pipe : us->send_bulk_pipe;
+		result = usb_stor_bulk_srb(us, pipe, srb);
+		usb_stor_dbg(us, "Bulk data transfer result 0x%x\n", result);
+		if (result == USB_STOR_XFER_ERROR)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		/*
+		 * If the device tried to send back more data than the
+		 * amount requested, the spec requires us to transfer
+		 * the CSW anyway.  Since there's no point retrying
+		 * the command, we'll return fake sense data indicating
+		 * Illegal Request, Invalid Field in CDB.
+		 */
+		if (result == USB_STOR_XFER_LONG)
+			fake_sense = 1;
+
+		/*
+		 * Sometimes a device will mistakenly skip the data phase
+		 * and go directly to the status phase without sending a
+		 * zero-length packet.  If we get a 13-byte response here,
+		 * check whether it really is a CSW.
+		 */
+		if (result == USB_STOR_XFER_SHORT &&
+				srb->sc_data_direction == DMA_FROM_DEVICE &&
+				transfer_length - scsi_get_resid(srb) ==
+					US_BULK_CS_WRAP_LEN) {
+			struct scatterlist *sg = NULL;
+			unsigned int offset = 0;
+
+			if (usb_stor_access_xfer_buf((unsigned char *) bcs,
+					US_BULK_CS_WRAP_LEN, srb, &sg,
+					&offset, FROM_XFER_BUF) ==
+						US_BULK_CS_WRAP_LEN &&
+					bcs->Signature ==
+						cpu_to_le32(US_BULK_CS_SIGN)) {
+				usb_stor_dbg(us, "Device skipped data phase\n");
+				scsi_set_resid(srb, transfer_length);
+				goto skipped_data_phase;
+			}
+		}
+	}
+
+	/*
+	 * See flow chart on pg 15 of the Bulk Only Transport spec for
+	 * an explanation of how this code works.
+	 */
+
+	/* get CSW for device status */
+	usb_stor_dbg(us, "Attempting to get CSW...\n");
+	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+				bcs, US_BULK_CS_WRAP_LEN, &cswlen);
+
+	/*
+	 * Some broken devices add unnecessary zero-length packets to the
+	 * end of their data transfers.  Such packets show up as 0-length
+	 * CSWs.  If we encounter such a thing, try to read the CSW again.
+	 */
+	if (result == USB_STOR_XFER_SHORT && cswlen == 0) {
+		usb_stor_dbg(us, "Received 0-length CSW; retrying...\n");
+		result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+				bcs, US_BULK_CS_WRAP_LEN, &cswlen);
+	}
+
+	/* did the attempt to read the CSW fail? */
+	if (result == USB_STOR_XFER_STALLED) {
+
+		/* get the status again */
+		usb_stor_dbg(us, "Attempting to get CSW (2nd try)...\n");
+		result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+				bcs, US_BULK_CS_WRAP_LEN, NULL);
+	}
+
+	/* if we still have a failure at this point, we're in trouble */
+	usb_stor_dbg(us, "Bulk status result = %d\n", result);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+ skipped_data_phase:
+	/* check bulk status */
+	residue = le32_to_cpu(bcs->Residue);
+	usb_stor_dbg(us, "Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
+		     le32_to_cpu(bcs->Signature), bcs->Tag,
+		     residue, bcs->Status);
+	if (!(bcs->Tag == us->tag || (us->fflags & US_FL_BULK_IGNORE_TAG)) ||
+		bcs->Status > US_BULK_STAT_PHASE) {
+		usb_stor_dbg(us, "Bulk logical error\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/*
+	 * Some broken devices report odd signatures, so we do not check them
+	 * for validity against the spec. We store the first one we see,
+	 * and check subsequent transfers for validity against this signature.
+	 */
+	if (!us->bcs_signature) {
+		us->bcs_signature = bcs->Signature;
+		if (us->bcs_signature != cpu_to_le32(US_BULK_CS_SIGN))
+			usb_stor_dbg(us, "Learnt BCS signature 0x%08X\n",
+				     le32_to_cpu(us->bcs_signature));
+	} else if (bcs->Signature != us->bcs_signature) {
+		usb_stor_dbg(us, "Signature mismatch: got %08X, expecting %08X\n",
+			     le32_to_cpu(bcs->Signature),
+			     le32_to_cpu(us->bcs_signature));
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/*
+	 * try to compute the actual residue, based on how much data
+	 * was really transferred and what the device tells us
+	 */
+	if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) {
+
+		/*
+		 * Heuristically detect devices that generate bogus residues
+		 * by seeing what happens with INQUIRY and READ CAPACITY
+		 * commands.
+		 */
+		if (bcs->Status == US_BULK_STAT_OK &&
+				scsi_get_resid(srb) == 0 &&
+					((srb->cmnd[0] == INQUIRY &&
+						transfer_length == 36) ||
+					(srb->cmnd[0] == READ_CAPACITY &&
+						transfer_length == 8))) {
+			us->fflags |= US_FL_IGNORE_RESIDUE;
+
+		} else {
+			residue = min(residue, transfer_length);
+			scsi_set_resid(srb, max(scsi_get_resid(srb), residue));
+		}
+	}
+
+	/* based on the status code, we report good or bad */
+	switch (bcs->Status) {
+		case US_BULK_STAT_OK:
+			/* device babbled -- return fake sense data */
+			if (fake_sense) {
+				memcpy(srb->sense_buffer, 
+				       usb_stor_sense_invalidCDB, 
+				       sizeof(usb_stor_sense_invalidCDB));
+				return USB_STOR_TRANSPORT_NO_SENSE;
+			}
+
+			/* command good -- note that data could be short */
+			return USB_STOR_TRANSPORT_GOOD;
+
+		case US_BULK_STAT_FAIL:
+			/* command failed */
+			return USB_STOR_TRANSPORT_FAILED;
+
+		case US_BULK_STAT_PHASE:
+			/*
+			 * phase error -- note that a transport reset will be
+			 * invoked by the invoke_transport() function
+			 */
+			return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/* we should never get here, but if we do, we're in trouble */
+	return USB_STOR_TRANSPORT_ERROR;
+}
+EXPORT_SYMBOL_GPL(usb_stor_Bulk_transport);
+
+/***********************************************************************
+ * Reset routines
+ ***********************************************************************/
+
+/*
+ * This is the common part of the device reset code.
+ *
+ * It's handy that every transport mechanism uses the control endpoint for
+ * resets.
+ *
+ * Basically, we send a reset with a 5-second timeout, so we don't get
+ * jammed attempting to do the reset.
+ */
+static int usb_stor_reset_common(struct us_data *us,
+		u8 request, u8 requesttype,
+		u16 value, u16 index, void *data, u16 size)
+{
+	int result;
+	int result2;
+
+	if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
+		usb_stor_dbg(us, "No reset during disconnect\n");
+		return -EIO;
+	}
+
+	result = usb_stor_control_msg(us, us->send_ctrl_pipe,
+			request, requesttype, value, index, data, size,
+			5*HZ);
+	if (result < 0) {
+		usb_stor_dbg(us, "Soft reset failed: %d\n", result);
+		return result;
+	}
+
+	/*
+	 * Give the device some time to recover from the reset,
+	 * but don't delay disconnect processing.
+	 */
+	wait_event_interruptible_timeout(us->delay_wait,
+			test_bit(US_FLIDX_DISCONNECTING, &us->dflags),
+			HZ*6);
+	if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
+		usb_stor_dbg(us, "Reset interrupted by disconnect\n");
+		return -EIO;
+	}
+
+	usb_stor_dbg(us, "Soft reset: clearing bulk-in endpoint halt\n");
+	result = usb_stor_clear_halt(us, us->recv_bulk_pipe);
+
+	usb_stor_dbg(us, "Soft reset: clearing bulk-out endpoint halt\n");
+	result2 = usb_stor_clear_halt(us, us->send_bulk_pipe);
+
+	/* return a result code based on the result of the clear-halts */
+	if (result >= 0)
+		result = result2;
+	if (result < 0)
+		usb_stor_dbg(us, "Soft reset failed\n");
+	else
+		usb_stor_dbg(us, "Soft reset done\n");
+	return result;
+}
+
+/* This issues a CB[I] Reset to the device in question */
+#define CB_RESET_CMD_SIZE	12
+
+int usb_stor_CB_reset(struct us_data *us)
+{
+	memset(us->iobuf, 0xFF, CB_RESET_CMD_SIZE);
+	us->iobuf[0] = SEND_DIAGNOSTIC;
+	us->iobuf[1] = 4;
+	return usb_stor_reset_common(us, US_CBI_ADSC, 
+				 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+				 0, us->ifnum, us->iobuf, CB_RESET_CMD_SIZE);
+}
+EXPORT_SYMBOL_GPL(usb_stor_CB_reset);
+
+/*
+ * This issues a Bulk-only Reset to the device in question, including
+ * clearing the subsequent endpoint halts that may occur.
+ */
+int usb_stor_Bulk_reset(struct us_data *us)
+{
+	return usb_stor_reset_common(us, US_BULK_RESET_REQUEST, 
+				 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+				 0, us->ifnum, NULL, 0);
+}
+EXPORT_SYMBOL_GPL(usb_stor_Bulk_reset);
+
+/*
+ * Issue a USB port reset to the device.  The caller must not hold
+ * us->dev_mutex.
+ */
+int usb_stor_port_reset(struct us_data *us)
+{
+	int result;
+
+	/*for these devices we must use the class specific method */
+	if (us->pusb_dev->quirks & USB_QUIRK_RESET)
+		return -EPERM;
+
+	result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf);
+	if (result < 0)
+		usb_stor_dbg(us, "unable to lock device for reset: %d\n",
+			     result);
+	else {
+		/* Were we disconnected while waiting for the lock? */
+		if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
+			result = -EIO;
+			usb_stor_dbg(us, "No reset during disconnect\n");
+		} else {
+			result = usb_reset_device(us->pusb_dev);
+			usb_stor_dbg(us, "usb_reset_device returns %d\n",
+				     result);
+		}
+		usb_unlock_device(us->pusb_dev);
+	}
+	return result;
+}
diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h
new file mode 100644
index 000000000..74ffd0d7e
--- /dev/null
+++ b/drivers/usb/storage/transport.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Driver for USB Mass Storage compliant devices
+ * Transport Functions Header File
+ *
+ * Current development and maintenance by:
+ *   (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices.  Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document.  The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ */
+
+#ifndef _TRANSPORT_H_
+#define _TRANSPORT_H_
+
+#include <linux/blkdev.h>
+
+/*
+ * usb_stor_bulk_transfer_xxx() return codes, in order of severity
+ */
+
+#define USB_STOR_XFER_GOOD	0	/* good transfer                 */
+#define USB_STOR_XFER_SHORT	1	/* transferred less than expected */
+#define USB_STOR_XFER_STALLED	2	/* endpoint stalled              */
+#define USB_STOR_XFER_LONG	3	/* device tried to send too much */
+#define USB_STOR_XFER_ERROR	4	/* transfer died in the middle   */
+
+/*
+ * Transport return codes
+ */
+
+#define USB_STOR_TRANSPORT_GOOD	   0   /* Transport good, command good	   */
+#define USB_STOR_TRANSPORT_FAILED  1   /* Transport good, command failed   */
+#define USB_STOR_TRANSPORT_NO_SENSE 2  /* Command failed, no auto-sense    */
+#define USB_STOR_TRANSPORT_ERROR   3   /* Transport bad (i.e. device dead) */
+
+/*
+ * We used to have USB_STOR_XFER_ABORTED and USB_STOR_TRANSPORT_ABORTED
+ * return codes.  But now the transport and low-level transfer routines
+ * treat an abort as just another error (-ENOENT for a cancelled URB).
+ * It is up to the invoke_transport() function to test for aborts and
+ * distinguish them from genuine communication errors.
+ */
+
+/*
+ * CBI accept device specific command
+ */
+
+#define US_CBI_ADSC		0
+
+extern int usb_stor_CB_transport(struct scsi_cmnd *, struct us_data*);
+extern int usb_stor_CB_reset(struct us_data*);
+
+extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data*);
+extern int usb_stor_Bulk_max_lun(struct us_data*);
+extern int usb_stor_Bulk_reset(struct us_data*);
+
+extern void usb_stor_invoke_transport(struct scsi_cmnd *, struct us_data*);
+extern void usb_stor_stop_transport(struct us_data*);
+
+extern int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
+		u8 request, u8 requesttype, u16 value, u16 index,
+		void *data, u16 size, int timeout);
+extern int usb_stor_clear_halt(struct us_data *us, unsigned int pipe);
+
+extern int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe,
+		u8 request, u8 requesttype, u16 value, u16 index,
+		void *data, u16 size);
+extern int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
+		void *buf, unsigned int length, unsigned int *act_len);
+extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe,
+		void *buf, unsigned int length, int use_sg, int *residual);
+extern int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
+		struct scsi_cmnd* srb);
+
+extern int usb_stor_port_reset(struct us_data *us);
+#endif
diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h
new file mode 100644
index 000000000..d73282c0e
--- /dev/null
+++ b/drivers/usb/storage/uas-detect.h
@@ -0,0 +1,162 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include "usb.h"
+
+static int uas_is_interface(struct usb_host_interface *intf)
+{
+	return (intf->desc.bInterfaceClass == USB_CLASS_MASS_STORAGE &&
+		intf->desc.bInterfaceSubClass == USB_SC_SCSI &&
+		intf->desc.bInterfaceProtocol == USB_PR_UAS);
+}
+
+static struct usb_host_interface *uas_find_uas_alt_setting(
+		struct usb_interface *intf)
+{
+	int i;
+
+	for (i = 0; i < intf->num_altsetting; i++) {
+		struct usb_host_interface *alt = &intf->altsetting[i];
+
+		if (uas_is_interface(alt))
+			return alt;
+	}
+
+	return NULL;
+}
+
+static int uas_find_endpoints(struct usb_host_interface *alt,
+			      struct usb_host_endpoint *eps[])
+{
+	struct usb_host_endpoint *endpoint = alt->endpoint;
+	unsigned i, n_endpoints = alt->desc.bNumEndpoints;
+
+	for (i = 0; i < n_endpoints; i++) {
+		unsigned char *extra = endpoint[i].extra;
+		int len = endpoint[i].extralen;
+		while (len >= 3) {
+			if (extra[1] == USB_DT_PIPE_USAGE) {
+				unsigned pipe_id = extra[2];
+				if (pipe_id > 0 && pipe_id < 5)
+					eps[pipe_id - 1] = &endpoint[i];
+				break;
+			}
+			len -= extra[0];
+			extra += extra[0];
+		}
+	}
+
+	if (!eps[0] || !eps[1] || !eps[2] || !eps[3])
+		return -ENODEV;
+
+	return 0;
+}
+
+static int uas_use_uas_driver(struct usb_interface *intf,
+			      const struct usb_device_id *id,
+			      unsigned long *flags_ret)
+{
+	struct usb_host_endpoint *eps[4] = { };
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+	unsigned long flags = id->driver_info;
+	struct usb_host_interface *alt;
+	int r;
+
+	alt = uas_find_uas_alt_setting(intf);
+	if (!alt)
+		return 0;
+
+	r = uas_find_endpoints(alt, eps);
+	if (r < 0)
+		return 0;
+
+	/*
+	 * ASMedia has a number of usb3 to sata bridge chips, at the time of
+	 * this writing the following versions exist:
+	 * ASM1051 - no uas support version
+	 * ASM1051 - with broken (*) uas support
+	 * ASM1053 - with working uas support, but problems with large xfers
+	 * ASM1153 - with working uas support
+	 *
+	 * Devices with these chips re-use a number of device-ids over the
+	 * entire line, so the device-id is useless to determine if we're
+	 * dealing with an ASM1051 (which we want to avoid).
+	 *
+	 * The ASM1153 can be identified by config.MaxPower == 0,
+	 * where as the ASM105x models have config.MaxPower == 36.
+	 *
+	 * Differentiating between the ASM1053 and ASM1051 is trickier, when
+	 * connected over USB-3 we can look at the number of streams supported,
+	 * ASM1051 supports 32 streams, where as early ASM1053 versions support
+	 * 16 streams, newer ASM1053-s also support 32 streams, but have a
+	 * different prod-id.
+	 *
+	 * (*) ASM1051 chips do work with UAS with some disks (with the
+	 *     US_FL_NO_REPORT_OPCODES quirk), but are broken with other disks
+	 */
+	if (le16_to_cpu(udev->descriptor.idVendor) == 0x174c &&
+			(le16_to_cpu(udev->descriptor.idProduct) == 0x5106 ||
+			 le16_to_cpu(udev->descriptor.idProduct) == 0x55aa)) {
+		if (udev->actconfig->desc.bMaxPower == 0) {
+			/* ASM1153, do nothing */
+		} else if (udev->speed < USB_SPEED_SUPER) {
+			/* No streams info, assume ASM1051 */
+			flags |= US_FL_IGNORE_UAS;
+		} else if (usb_ss_max_streams(&eps[1]->ss_ep_comp) == 32) {
+			/* Possibly an ASM1051, disable uas */
+			flags |= US_FL_IGNORE_UAS;
+		} else {
+			/* ASM1053, these have issues with large transfers */
+			flags |= US_FL_MAX_SECTORS_240;
+		}
+	}
+
+	/* All Seagate disk enclosures have broken ATA pass-through support */
+	if (le16_to_cpu(udev->descriptor.idVendor) == 0x0bc2)
+		flags |= US_FL_NO_ATA_1X;
+
+	/*
+	 * RTL9210-based enclosure from HIKSEMI, MD202 reportedly have issues
+	 * with UAS.  This isn't distinguishable with just idVendor and
+	 * idProduct, use manufacturer and product too.
+	 *
+	 * Reported-by: Hongling Zeng <zenghongling@kylinos.cn>
+	 */
+	if (le16_to_cpu(udev->descriptor.idVendor) == 0x0bda &&
+			le16_to_cpu(udev->descriptor.idProduct) == 0x9210 &&
+			(udev->manufacturer && !strcmp(udev->manufacturer, "HIKSEMI")) &&
+			(udev->product && !strcmp(udev->product, "MD202")))
+		flags |= US_FL_IGNORE_UAS;
+
+	usb_stor_adjust_quirks(udev, &flags);
+
+	if (flags & US_FL_IGNORE_UAS) {
+		dev_warn(&udev->dev,
+			"UAS is ignored for this device, using usb-storage instead\n");
+		return 0;
+	}
+
+	if (udev->bus->sg_tablesize == 0) {
+		dev_warn(&udev->dev,
+			"The driver for the USB controller %s does not support scatter-gather which is\n",
+			hcd->driver->description);
+		dev_warn(&udev->dev,
+			"required by the UAS driver. Please try an other USB controller if you wish to use UAS.\n");
+		return 0;
+	}
+
+	if (udev->speed >= USB_SPEED_SUPER && !hcd->can_do_streams) {
+		dev_warn(&udev->dev,
+			"USB controller %s does not support streams, which are required by the UAS driver.\n",
+			hcd_to_bus(hcd)->bus_name);
+		dev_warn(&udev->dev,
+			"Please try an other USB controller if you wish to use UAS.\n");
+		return 0;
+	}
+
+	if (flags_ret)
+		*flags_ret = flags;
+
+	return 1;
+}
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
new file mode 100644
index 000000000..de3836412
--- /dev/null
+++ b/drivers/usb/storage/uas.c
@@ -0,0 +1,1282 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Attached SCSI
+ * Note that this is not the same as the USB Mass Storage driver
+ *
+ * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016
+ * Copyright Matthew Wilcox for Intel Corp, 2010
+ * Copyright Sarah Sharp for Intel Corp, 2010
+ */
+
+#include <linux/blkdev.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb_usual.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/storage.h>
+#include <linux/usb/uas.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+
+#include "uas-detect.h"
+#include "scsiglue.h"
+
+#define MAX_CMNDS 256
+
+struct uas_dev_info {
+	struct usb_interface *intf;
+	struct usb_device *udev;
+	struct usb_anchor cmd_urbs;
+	struct usb_anchor sense_urbs;
+	struct usb_anchor data_urbs;
+	unsigned long flags;
+	int qdepth, resetting;
+	unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
+	unsigned use_streams:1;
+	unsigned shutdown:1;
+	struct scsi_cmnd *cmnd[MAX_CMNDS];
+	spinlock_t lock;
+	struct work_struct work;
+	struct work_struct scan_work;      /* for async scanning */
+};
+
+enum {
+	SUBMIT_STATUS_URB	= BIT(1),
+	ALLOC_DATA_IN_URB	= BIT(2),
+	SUBMIT_DATA_IN_URB	= BIT(3),
+	ALLOC_DATA_OUT_URB	= BIT(4),
+	SUBMIT_DATA_OUT_URB	= BIT(5),
+	ALLOC_CMD_URB		= BIT(6),
+	SUBMIT_CMD_URB		= BIT(7),
+	COMMAND_INFLIGHT        = BIT(8),
+	DATA_IN_URB_INFLIGHT    = BIT(9),
+	DATA_OUT_URB_INFLIGHT   = BIT(10),
+	COMMAND_ABORTED         = BIT(11),
+	IS_IN_WORK_LIST         = BIT(12),
+};
+
+/* Overrides scsi_pointer */
+struct uas_cmd_info {
+	unsigned int state;
+	unsigned int uas_tag;
+	struct urb *cmd_urb;
+	struct urb *data_in_urb;
+	struct urb *data_out_urb;
+};
+
+/* I hate forward declarations, but I actually have a loop */
+static int uas_submit_urbs(struct scsi_cmnd *cmnd,
+				struct uas_dev_info *devinfo);
+static void uas_do_work(struct work_struct *work);
+static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller);
+static void uas_free_streams(struct uas_dev_info *devinfo);
+static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
+				int status);
+
+/*
+ * This driver needs its own workqueue, as we need to control memory allocation.
+ *
+ * In the course of error handling and power management uas_wait_for_pending_cmnds()
+ * needs to flush pending work items. In these contexts we cannot allocate memory
+ * by doing block IO as we would deadlock. For the same reason we cannot wait
+ * for anything allocating memory not heeding these constraints.
+ *
+ * So we have to control all work items that can be on the workqueue we flush.
+ * Hence we cannot share a queue and need our own.
+ */
+static struct workqueue_struct *workqueue;
+
+static void uas_do_work(struct work_struct *work)
+{
+	struct uas_dev_info *devinfo =
+		container_of(work, struct uas_dev_info, work);
+	struct uas_cmd_info *cmdinfo;
+	struct scsi_cmnd *cmnd;
+	unsigned long flags;
+	int i, err;
+
+	spin_lock_irqsave(&devinfo->lock, flags);
+
+	if (devinfo->resetting)
+		goto out;
+
+	for (i = 0; i < devinfo->qdepth; i++) {
+		if (!devinfo->cmnd[i])
+			continue;
+
+		cmnd = devinfo->cmnd[i];
+		cmdinfo = scsi_cmd_priv(cmnd);
+
+		if (!(cmdinfo->state & IS_IN_WORK_LIST))
+			continue;
+
+		err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
+		if (!err)
+			cmdinfo->state &= ~IS_IN_WORK_LIST;
+		else
+			queue_work(workqueue, &devinfo->work);
+	}
+out:
+	spin_unlock_irqrestore(&devinfo->lock, flags);
+}
+
+static void uas_scan_work(struct work_struct *work)
+{
+	struct uas_dev_info *devinfo =
+		container_of(work, struct uas_dev_info, scan_work);
+	struct Scsi_Host *shost = usb_get_intfdata(devinfo->intf);
+
+	dev_dbg(&devinfo->intf->dev, "starting scan\n");
+	scsi_scan_host(shost);
+	dev_dbg(&devinfo->intf->dev, "scan complete\n");
+}
+
+static void uas_add_work(struct scsi_cmnd *cmnd)
+{
+	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
+	struct uas_dev_info *devinfo = cmnd->device->hostdata;
+
+	lockdep_assert_held(&devinfo->lock);
+	cmdinfo->state |= IS_IN_WORK_LIST;
+	queue_work(workqueue, &devinfo->work);
+}
+
+static void uas_zap_pending(struct uas_dev_info *devinfo, int result)
+{
+	struct uas_cmd_info *cmdinfo;
+	struct scsi_cmnd *cmnd;
+	unsigned long flags;
+	int i, err;
+
+	spin_lock_irqsave(&devinfo->lock, flags);
+	for (i = 0; i < devinfo->qdepth; i++) {
+		if (!devinfo->cmnd[i])
+			continue;
+
+		cmnd = devinfo->cmnd[i];
+		cmdinfo = scsi_cmd_priv(cmnd);
+		uas_log_cmd_state(cmnd, __func__, 0);
+		/* Sense urbs were killed, clear COMMAND_INFLIGHT manually */
+		cmdinfo->state &= ~COMMAND_INFLIGHT;
+		cmnd->result = result << 16;
+		err = uas_try_complete(cmnd, __func__);
+		WARN_ON(err != 0);
+	}
+	spin_unlock_irqrestore(&devinfo->lock, flags);
+}
+
+static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
+{
+	struct sense_iu *sense_iu = urb->transfer_buffer;
+	struct scsi_device *sdev = cmnd->device;
+
+	if (urb->actual_length > 16) {
+		unsigned len = be16_to_cpup(&sense_iu->len);
+		if (len + 16 != urb->actual_length) {
+			int newlen = min(len + 16, urb->actual_length) - 16;
+			if (newlen < 0)
+				newlen = 0;
+			sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
+				"disagrees with IU sense data length %d, "
+				"using %d bytes of sense data\n", __func__,
+					urb->actual_length, len, newlen);
+			len = newlen;
+		}
+		memcpy(cmnd->sense_buffer, sense_iu->sense, len);
+	}
+
+	cmnd->result = sense_iu->status;
+}
+
+static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
+			      int status)
+{
+	struct uas_cmd_info *ci = scsi_cmd_priv(cmnd);
+
+	if (status == -ENODEV) /* too late */
+		return;
+
+	scmd_printk(KERN_INFO, cmnd,
+		    "%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ",
+		    prefix, status, ci->uas_tag,
+		    (ci->state & SUBMIT_STATUS_URB)     ? " s-st"  : "",
+		    (ci->state & ALLOC_DATA_IN_URB)     ? " a-in"  : "",
+		    (ci->state & SUBMIT_DATA_IN_URB)    ? " s-in"  : "",
+		    (ci->state & ALLOC_DATA_OUT_URB)    ? " a-out" : "",
+		    (ci->state & SUBMIT_DATA_OUT_URB)   ? " s-out" : "",
+		    (ci->state & ALLOC_CMD_URB)         ? " a-cmd" : "",
+		    (ci->state & SUBMIT_CMD_URB)        ? " s-cmd" : "",
+		    (ci->state & COMMAND_INFLIGHT)      ? " CMD"   : "",
+		    (ci->state & DATA_IN_URB_INFLIGHT)  ? " IN"    : "",
+		    (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT"   : "",
+		    (ci->state & COMMAND_ABORTED)       ? " abort" : "",
+		    (ci->state & IS_IN_WORK_LIST)       ? " work"  : "");
+	scsi_print_command(cmnd);
+}
+
+static void uas_free_unsubmitted_urbs(struct scsi_cmnd *cmnd)
+{
+	struct uas_cmd_info *cmdinfo;
+
+	if (!cmnd)
+		return;
+
+	cmdinfo = scsi_cmd_priv(cmnd);
+
+	if (cmdinfo->state & SUBMIT_CMD_URB)
+		usb_free_urb(cmdinfo->cmd_urb);
+
+	/* data urbs may have never gotten their submit flag set */
+	if (!(cmdinfo->state & DATA_IN_URB_INFLIGHT))
+		usb_free_urb(cmdinfo->data_in_urb);
+	if (!(cmdinfo->state & DATA_OUT_URB_INFLIGHT))
+		usb_free_urb(cmdinfo->data_out_urb);
+}
+
+static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller)
+{
+	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
+	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
+
+	lockdep_assert_held(&devinfo->lock);
+	if (cmdinfo->state & (COMMAND_INFLIGHT |
+			      DATA_IN_URB_INFLIGHT |
+			      DATA_OUT_URB_INFLIGHT |
+			      COMMAND_ABORTED))
+		return -EBUSY;
+	devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
+	uas_free_unsubmitted_urbs(cmnd);
+	scsi_done(cmnd);
+	return 0;
+}
+
+static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
+			  unsigned direction)
+{
+	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
+	int err;
+
+	cmdinfo->state |= direction | SUBMIT_STATUS_URB;
+	err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
+	if (err) {
+		uas_add_work(cmnd);
+	}
+}
+
+static bool uas_evaluate_response_iu(struct response_iu *riu, struct scsi_cmnd *cmnd)
+{
+	u8 response_code = riu->response_code;
+
+	switch (response_code) {
+	case RC_INCORRECT_LUN:
+		set_host_byte(cmnd, DID_BAD_TARGET);
+		break;
+	case RC_TMF_SUCCEEDED:
+		set_host_byte(cmnd, DID_OK);
+		break;
+	case RC_TMF_NOT_SUPPORTED:
+		set_host_byte(cmnd, DID_BAD_TARGET);
+		break;
+	default:
+		uas_log_cmd_state(cmnd, "response iu", response_code);
+		set_host_byte(cmnd, DID_ERROR);
+		break;
+	}
+
+	return response_code == RC_TMF_SUCCEEDED;
+}
+
+static void uas_stat_cmplt(struct urb *urb)
+{
+	struct iu *iu = urb->transfer_buffer;
+	struct Scsi_Host *shost = urb->context;
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+	struct urb *data_in_urb = NULL;
+	struct urb *data_out_urb = NULL;
+	struct scsi_cmnd *cmnd;
+	struct uas_cmd_info *cmdinfo;
+	unsigned long flags;
+	unsigned int idx;
+	int status = urb->status;
+	bool success;
+
+	spin_lock_irqsave(&devinfo->lock, flags);
+
+	if (devinfo->resetting)
+		goto out;
+
+	if (status) {
+		if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN)
+			dev_err(&urb->dev->dev, "stat urb: status %d\n", status);
+		goto out;
+	}
+
+	idx = be16_to_cpup(&iu->tag) - 1;
+	if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) {
+		dev_err(&urb->dev->dev,
+			"stat urb: no pending cmd for uas-tag %d\n", idx + 1);
+		goto out;
+	}
+
+	cmnd = devinfo->cmnd[idx];
+	cmdinfo = scsi_cmd_priv(cmnd);
+
+	if (!(cmdinfo->state & COMMAND_INFLIGHT)) {
+		uas_log_cmd_state(cmnd, "unexpected status cmplt", 0);
+		goto out;
+	}
+
+	switch (iu->iu_id) {
+	case IU_ID_STATUS:
+		uas_sense(urb, cmnd);
+		if (cmnd->result != 0) {
+			/* cancel data transfers on error */
+			data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
+			data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
+		}
+		cmdinfo->state &= ~COMMAND_INFLIGHT;
+		uas_try_complete(cmnd, __func__);
+		break;
+	case IU_ID_READ_READY:
+		if (!cmdinfo->data_in_urb ||
+				(cmdinfo->state & DATA_IN_URB_INFLIGHT)) {
+			uas_log_cmd_state(cmnd, "unexpected read rdy", 0);
+			break;
+		}
+		uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB);
+		break;
+	case IU_ID_WRITE_READY:
+		if (!cmdinfo->data_out_urb ||
+				(cmdinfo->state & DATA_OUT_URB_INFLIGHT)) {
+			uas_log_cmd_state(cmnd, "unexpected write rdy", 0);
+			break;
+		}
+		uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB);
+		break;
+	case IU_ID_RESPONSE:
+		cmdinfo->state &= ~COMMAND_INFLIGHT;
+		success = uas_evaluate_response_iu((struct response_iu *)iu, cmnd);
+		if (!success) {
+			/* Error, cancel data transfers */
+			data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
+			data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
+		}
+		uas_try_complete(cmnd, __func__);
+		break;
+	default:
+		uas_log_cmd_state(cmnd, "bogus IU", iu->iu_id);
+	}
+out:
+	usb_free_urb(urb);
+	spin_unlock_irqrestore(&devinfo->lock, flags);
+
+	/* Unlinking of data urbs must be done without holding the lock */
+	if (data_in_urb) {
+		usb_unlink_urb(data_in_urb);
+		usb_put_urb(data_in_urb);
+	}
+	if (data_out_urb) {
+		usb_unlink_urb(data_out_urb);
+		usb_put_urb(data_out_urb);
+	}
+}
+
+static void uas_data_cmplt(struct urb *urb)
+{
+	struct scsi_cmnd *cmnd = urb->context;
+	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
+	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
+	struct scsi_data_buffer *sdb = &cmnd->sdb;
+	unsigned long flags;
+	int status = urb->status;
+
+	spin_lock_irqsave(&devinfo->lock, flags);
+
+	if (cmdinfo->data_in_urb == urb) {
+		cmdinfo->state &= ~DATA_IN_URB_INFLIGHT;
+		cmdinfo->data_in_urb = NULL;
+	} else if (cmdinfo->data_out_urb == urb) {
+		cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT;
+		cmdinfo->data_out_urb = NULL;
+	}
+
+	if (devinfo->resetting)
+		goto out;
+
+	/* Data urbs should not complete before the cmd urb is submitted */
+	if (cmdinfo->state & SUBMIT_CMD_URB) {
+		uas_log_cmd_state(cmnd, "unexpected data cmplt", 0);
+		goto out;
+	}
+
+	if (status) {
+		if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN)
+			uas_log_cmd_state(cmnd, "data cmplt err", status);
+		/* error: no data transfered */
+		scsi_set_resid(cmnd, sdb->length);
+	} else {
+		scsi_set_resid(cmnd, sdb->length - urb->actual_length);
+	}
+	uas_try_complete(cmnd, __func__);
+out:
+	usb_free_urb(urb);
+	spin_unlock_irqrestore(&devinfo->lock, flags);
+}
+
+static void uas_cmd_cmplt(struct urb *urb)
+{
+	if (urb->status)
+		dev_err(&urb->dev->dev, "cmd cmplt err %d\n", urb->status);
+
+	usb_free_urb(urb);
+}
+
+static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
+				      struct scsi_cmnd *cmnd,
+				      enum dma_data_direction dir)
+{
+	struct usb_device *udev = devinfo->udev;
+	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
+	struct urb *urb = usb_alloc_urb(0, gfp);
+	struct scsi_data_buffer *sdb = &cmnd->sdb;
+	unsigned int pipe = (dir == DMA_FROM_DEVICE)
+		? devinfo->data_in_pipe : devinfo->data_out_pipe;
+
+	if (!urb)
+		goto out;
+	usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length,
+			  uas_data_cmplt, cmnd);
+	if (devinfo->use_streams)
+		urb->stream_id = cmdinfo->uas_tag;
+	urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
+	urb->sg = sdb->table.sgl;
+ out:
+	return urb;
+}
+
+static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
+				       struct scsi_cmnd *cmnd)
+{
+	struct usb_device *udev = devinfo->udev;
+	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
+	struct urb *urb = usb_alloc_urb(0, gfp);
+	struct sense_iu *iu;
+
+	if (!urb)
+		goto out;
+
+	iu = kzalloc(sizeof(*iu), gfp);
+	if (!iu)
+		goto free;
+
+	usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu),
+			  uas_stat_cmplt, cmnd->device->host);
+	if (devinfo->use_streams)
+		urb->stream_id = cmdinfo->uas_tag;
+	urb->transfer_flags |= URB_FREE_BUFFER;
+ out:
+	return urb;
+ free:
+	usb_free_urb(urb);
+	return NULL;
+}
+
+static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
+					struct scsi_cmnd *cmnd)
+{
+	struct usb_device *udev = devinfo->udev;
+	struct scsi_device *sdev = cmnd->device;
+	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
+	struct urb *urb = usb_alloc_urb(0, gfp);
+	struct command_iu *iu;
+	int len;
+
+	if (!urb)
+		goto out;
+
+	len = cmnd->cmd_len - 16;
+	if (len < 0)
+		len = 0;
+	len = ALIGN(len, 4);
+	iu = kzalloc(sizeof(*iu) + len, gfp);
+	if (!iu)
+		goto free;
+
+	iu->iu_id = IU_ID_COMMAND;
+	iu->tag = cpu_to_be16(cmdinfo->uas_tag);
+	iu->prio_attr = UAS_SIMPLE_TAG;
+	iu->len = len;
+	int_to_scsilun(sdev->lun, &iu->lun);
+	memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
+
+	usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len,
+							uas_cmd_cmplt, NULL);
+	urb->transfer_flags |= URB_FREE_BUFFER;
+ out:
+	return urb;
+ free:
+	usb_free_urb(urb);
+	return NULL;
+}
+
+/*
+ * Why should I request the Status IU before sending the Command IU?  Spec
+ * says to, but also says the device may receive them in any order.  Seems
+ * daft to me.
+ */
+
+static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp)
+{
+	struct uas_dev_info *devinfo = cmnd->device->hostdata;
+	struct urb *urb;
+	int err;
+
+	urb = uas_alloc_sense_urb(devinfo, gfp, cmnd);
+	if (!urb)
+		return NULL;
+	usb_anchor_urb(urb, &devinfo->sense_urbs);
+	err = usb_submit_urb(urb, gfp);
+	if (err) {
+		usb_unanchor_urb(urb);
+		uas_log_cmd_state(cmnd, "sense submit err", err);
+		usb_free_urb(urb);
+		return NULL;
+	}
+	return urb;
+}
+
+static int uas_submit_urbs(struct scsi_cmnd *cmnd,
+			   struct uas_dev_info *devinfo)
+{
+	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
+	struct urb *urb;
+	int err;
+
+	lockdep_assert_held(&devinfo->lock);
+	if (cmdinfo->state & SUBMIT_STATUS_URB) {
+		urb = uas_submit_sense_urb(cmnd, GFP_ATOMIC);
+		if (!urb)
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		cmdinfo->state &= ~SUBMIT_STATUS_URB;
+	}
+
+	if (cmdinfo->state & ALLOC_DATA_IN_URB) {
+		cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
+							cmnd, DMA_FROM_DEVICE);
+		if (!cmdinfo->data_in_urb)
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		cmdinfo->state &= ~ALLOC_DATA_IN_URB;
+	}
+
+	if (cmdinfo->state & SUBMIT_DATA_IN_URB) {
+		usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs);
+		err = usb_submit_urb(cmdinfo->data_in_urb, GFP_ATOMIC);
+		if (err) {
+			usb_unanchor_urb(cmdinfo->data_in_urb);
+			uas_log_cmd_state(cmnd, "data in submit err", err);
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		}
+		cmdinfo->state &= ~SUBMIT_DATA_IN_URB;
+		cmdinfo->state |= DATA_IN_URB_INFLIGHT;
+	}
+
+	if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
+		cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
+							cmnd, DMA_TO_DEVICE);
+		if (!cmdinfo->data_out_urb)
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
+	}
+
+	if (cmdinfo->state & SUBMIT_DATA_OUT_URB) {
+		usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs);
+		err = usb_submit_urb(cmdinfo->data_out_urb, GFP_ATOMIC);
+		if (err) {
+			usb_unanchor_urb(cmdinfo->data_out_urb);
+			uas_log_cmd_state(cmnd, "data out submit err", err);
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		}
+		cmdinfo->state &= ~SUBMIT_DATA_OUT_URB;
+		cmdinfo->state |= DATA_OUT_URB_INFLIGHT;
+	}
+
+	if (cmdinfo->state & ALLOC_CMD_URB) {
+		cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd);
+		if (!cmdinfo->cmd_urb)
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		cmdinfo->state &= ~ALLOC_CMD_URB;
+	}
+
+	if (cmdinfo->state & SUBMIT_CMD_URB) {
+		usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs);
+		err = usb_submit_urb(cmdinfo->cmd_urb, GFP_ATOMIC);
+		if (err) {
+			usb_unanchor_urb(cmdinfo->cmd_urb);
+			uas_log_cmd_state(cmnd, "cmd submit err", err);
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		}
+		cmdinfo->cmd_urb = NULL;
+		cmdinfo->state &= ~SUBMIT_CMD_URB;
+		cmdinfo->state |= COMMAND_INFLIGHT;
+	}
+
+	return 0;
+}
+
+static int uas_queuecommand_lck(struct scsi_cmnd *cmnd)
+{
+	struct scsi_device *sdev = cmnd->device;
+	struct uas_dev_info *devinfo = sdev->hostdata;
+	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
+	unsigned long flags;
+	int idx, err;
+
+	/* Re-check scsi_block_requests now that we've the host-lock */
+	if (cmnd->device->host->host_self_blocked)
+		return SCSI_MLQUEUE_DEVICE_BUSY;
+
+	if ((devinfo->flags & US_FL_NO_ATA_1X) &&
+			(cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) {
+		memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB,
+		       sizeof(usb_stor_sense_invalidCDB));
+		cmnd->result = SAM_STAT_CHECK_CONDITION;
+		scsi_done(cmnd);
+		return 0;
+	}
+
+	spin_lock_irqsave(&devinfo->lock, flags);
+
+	if (devinfo->resetting) {
+		set_host_byte(cmnd, DID_ERROR);
+		scsi_done(cmnd);
+		goto zombie;
+	}
+
+	/* Find a free uas-tag */
+	for (idx = 0; idx < devinfo->qdepth; idx++) {
+		if (!devinfo->cmnd[idx])
+			break;
+	}
+	if (idx == devinfo->qdepth) {
+		spin_unlock_irqrestore(&devinfo->lock, flags);
+		return SCSI_MLQUEUE_DEVICE_BUSY;
+	}
+
+	memset(cmdinfo, 0, sizeof(*cmdinfo));
+	cmdinfo->uas_tag = idx + 1; /* uas-tag == usb-stream-id, so 1 based */
+	cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB;
+
+	switch (cmnd->sc_data_direction) {
+	case DMA_FROM_DEVICE:
+		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
+		break;
+	case DMA_BIDIRECTIONAL:
+		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
+		fallthrough;
+	case DMA_TO_DEVICE:
+		cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB;
+		break;
+	case DMA_NONE:
+		break;
+	}
+
+	if (!devinfo->use_streams)
+		cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
+
+	err = uas_submit_urbs(cmnd, devinfo);
+	/*
+	 * in case of fatal errors the SCSI layer is peculiar
+	 * a command that has finished is a success for the purpose
+	 * of queueing, no matter how fatal the error
+	 */
+	if (err == -ENODEV) {
+		set_host_byte(cmnd, DID_ERROR);
+		scsi_done(cmnd);
+		goto zombie;
+	}
+	if (err) {
+		/* If we did nothing, give up now */
+		if (cmdinfo->state & SUBMIT_STATUS_URB) {
+			spin_unlock_irqrestore(&devinfo->lock, flags);
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		}
+		uas_add_work(cmnd);
+	}
+
+	devinfo->cmnd[idx] = cmnd;
+zombie:
+	spin_unlock_irqrestore(&devinfo->lock, flags);
+	return 0;
+}
+
+static DEF_SCSI_QCMD(uas_queuecommand)
+
+/*
+ * For now we do not support actually sending an abort to the device, so
+ * this eh always fails. Still we must define it to make sure that we've
+ * dropped all references to the cmnd in question once this function exits.
+ */
+static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
+{
+	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
+	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
+	struct urb *data_in_urb = NULL;
+	struct urb *data_out_urb = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&devinfo->lock, flags);
+
+	uas_log_cmd_state(cmnd, __func__, 0);
+
+	/* Ensure that try_complete does not call scsi_done */
+	cmdinfo->state |= COMMAND_ABORTED;
+
+	/* Drop all refs to this cmnd, kill data urbs to break their ref */
+	devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
+	if (cmdinfo->state & DATA_IN_URB_INFLIGHT)
+		data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
+	if (cmdinfo->state & DATA_OUT_URB_INFLIGHT)
+		data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
+
+	uas_free_unsubmitted_urbs(cmnd);
+
+	spin_unlock_irqrestore(&devinfo->lock, flags);
+
+	if (data_in_urb) {
+		usb_kill_urb(data_in_urb);
+		usb_put_urb(data_in_urb);
+	}
+	if (data_out_urb) {
+		usb_kill_urb(data_out_urb);
+		usb_put_urb(data_out_urb);
+	}
+
+	return FAILED;
+}
+
+static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd)
+{
+	struct scsi_device *sdev = cmnd->device;
+	struct uas_dev_info *devinfo = sdev->hostdata;
+	struct usb_device *udev = devinfo->udev;
+	unsigned long flags;
+	int err;
+
+	err = usb_lock_device_for_reset(udev, devinfo->intf);
+	if (err) {
+		shost_printk(KERN_ERR, sdev->host,
+			     "%s FAILED to get lock err %d\n", __func__, err);
+		return FAILED;
+	}
+
+	shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__);
+
+	spin_lock_irqsave(&devinfo->lock, flags);
+	devinfo->resetting = 1;
+	spin_unlock_irqrestore(&devinfo->lock, flags);
+
+	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
+	usb_kill_anchored_urbs(&devinfo->sense_urbs);
+	usb_kill_anchored_urbs(&devinfo->data_urbs);
+	uas_zap_pending(devinfo, DID_RESET);
+
+	err = usb_reset_device(udev);
+
+	spin_lock_irqsave(&devinfo->lock, flags);
+	devinfo->resetting = 0;
+	spin_unlock_irqrestore(&devinfo->lock, flags);
+
+	usb_unlock_device(udev);
+
+	if (err) {
+		shost_printk(KERN_INFO, sdev->host, "%s FAILED err %d\n",
+			     __func__, err);
+		return FAILED;
+	}
+
+	shost_printk(KERN_INFO, sdev->host, "%s success\n", __func__);
+	return SUCCESS;
+}
+
+static int uas_target_alloc(struct scsi_target *starget)
+{
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)
+			dev_to_shost(starget->dev.parent)->hostdata;
+
+	if (devinfo->flags & US_FL_NO_REPORT_LUNS)
+		starget->no_report_luns = 1;
+
+	return 0;
+}
+
+static int uas_slave_alloc(struct scsi_device *sdev)
+{
+	struct uas_dev_info *devinfo =
+		(struct uas_dev_info *)sdev->host->hostdata;
+
+	sdev->hostdata = devinfo;
+
+	/*
+	 * The protocol has no requirements on alignment in the strict sense.
+	 * Controllers may or may not have alignment restrictions.
+	 * As this is not exported, we use an extremely conservative guess.
+	 */
+	blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
+
+	if (devinfo->flags & US_FL_MAX_SECTORS_64)
+		blk_queue_max_hw_sectors(sdev->request_queue, 64);
+	else if (devinfo->flags & US_FL_MAX_SECTORS_240)
+		blk_queue_max_hw_sectors(sdev->request_queue, 240);
+
+	return 0;
+}
+
+static int uas_slave_configure(struct scsi_device *sdev)
+{
+	struct uas_dev_info *devinfo = sdev->hostdata;
+
+	if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
+		sdev->no_report_opcodes = 1;
+
+	/* A few buggy USB-ATA bridges don't understand FUA */
+	if (devinfo->flags & US_FL_BROKEN_FUA)
+		sdev->broken_fua = 1;
+
+	/* UAS also needs to support FL_ALWAYS_SYNC */
+	if (devinfo->flags & US_FL_ALWAYS_SYNC) {
+		sdev->skip_ms_page_3f = 1;
+		sdev->skip_ms_page_8 = 1;
+		sdev->wce_default_on = 1;
+	}
+
+	/* Some disks cannot handle READ_CAPACITY_16 */
+	if (devinfo->flags & US_FL_NO_READ_CAPACITY_16)
+		sdev->no_read_capacity_16 = 1;
+
+	/* Some disks cannot handle WRITE_SAME */
+	if (devinfo->flags & US_FL_NO_SAME)
+		sdev->no_write_same = 1;
+	/*
+	 * Some disks return the total number of blocks in response
+	 * to READ CAPACITY rather than the highest block number.
+	 * If this device makes that mistake, tell the sd driver.
+	 */
+	if (devinfo->flags & US_FL_FIX_CAPACITY)
+		sdev->fix_capacity = 1;
+
+	/*
+	 * in some cases we have to guess
+	 */
+	if (devinfo->flags & US_FL_CAPACITY_HEURISTICS)
+		sdev->guess_capacity = 1;
+
+	/*
+	 * Some devices don't like MODE SENSE with page=0x3f,
+	 * which is the command used for checking if a device
+	 * is write-protected.  Now that we tell the sd driver
+	 * to do a 192-byte transfer with this command the
+	 * majority of devices work fine, but a few still can't
+	 * handle it.  The sd driver will simply assume those
+	 * devices are write-enabled.
+	 */
+	if (devinfo->flags & US_FL_NO_WP_DETECT)
+		sdev->skip_ms_page_3f = 1;
+
+	scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
+	return 0;
+}
+
+static struct scsi_host_template uas_host_template = {
+	.module = THIS_MODULE,
+	.name = "uas",
+	.queuecommand = uas_queuecommand,
+	.target_alloc = uas_target_alloc,
+	.slave_alloc = uas_slave_alloc,
+	.slave_configure = uas_slave_configure,
+	.eh_abort_handler = uas_eh_abort_handler,
+	.eh_device_reset_handler = uas_eh_device_reset_handler,
+	.this_id = -1,
+	.skip_settle_delay = 1,
+	.dma_boundary = PAGE_SIZE - 1,
+	.cmd_size = sizeof(struct uas_cmd_info),
+};
+
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+	.driver_info = (flags) }
+
+static struct usb_device_id uas_usb_ids[] = {
+#	include "unusual_uas.h"
+	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
+	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, uas_usb_ids);
+
+#undef UNUSUAL_DEV
+
+static int uas_switch_interface(struct usb_device *udev,
+				struct usb_interface *intf)
+{
+	struct usb_host_interface *alt;
+
+	alt = uas_find_uas_alt_setting(intf);
+	if (!alt)
+		return -ENODEV;
+
+	return usb_set_interface(udev, alt->desc.bInterfaceNumber,
+			alt->desc.bAlternateSetting);
+}
+
+static int uas_configure_endpoints(struct uas_dev_info *devinfo)
+{
+	struct usb_host_endpoint *eps[4] = { };
+	struct usb_device *udev = devinfo->udev;
+	int r;
+
+	r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps);
+	if (r)
+		return r;
+
+	devinfo->cmd_pipe = usb_sndbulkpipe(udev,
+					    usb_endpoint_num(&eps[0]->desc));
+	devinfo->status_pipe = usb_rcvbulkpipe(udev,
+					    usb_endpoint_num(&eps[1]->desc));
+	devinfo->data_in_pipe = usb_rcvbulkpipe(udev,
+					    usb_endpoint_num(&eps[2]->desc));
+	devinfo->data_out_pipe = usb_sndbulkpipe(udev,
+					    usb_endpoint_num(&eps[3]->desc));
+
+	if (udev->speed < USB_SPEED_SUPER) {
+		devinfo->qdepth = 32;
+		devinfo->use_streams = 0;
+	} else {
+		devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1,
+						    3, MAX_CMNDS, GFP_NOIO);
+		if (devinfo->qdepth < 0)
+			return devinfo->qdepth;
+		devinfo->use_streams = 1;
+	}
+
+	return 0;
+}
+
+static void uas_free_streams(struct uas_dev_info *devinfo)
+{
+	struct usb_device *udev = devinfo->udev;
+	struct usb_host_endpoint *eps[3];
+
+	eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
+	eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
+	eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
+	usb_free_streams(devinfo->intf, eps, 3, GFP_NOIO);
+}
+
+static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	int result = -ENOMEM;
+	struct Scsi_Host *shost = NULL;
+	struct uas_dev_info *devinfo;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	unsigned long dev_flags;
+
+	if (!uas_use_uas_driver(intf, id, &dev_flags))
+		return -ENODEV;
+
+	if (uas_switch_interface(udev, intf))
+		return -ENODEV;
+
+	shost = scsi_host_alloc(&uas_host_template,
+				sizeof(struct uas_dev_info));
+	if (!shost)
+		goto set_alt0;
+
+	shost->max_cmd_len = 16 + 252;
+	shost->max_id = 1;
+	shost->max_lun = 256;
+	shost->max_channel = 0;
+	shost->sg_tablesize = udev->bus->sg_tablesize;
+
+	devinfo = (struct uas_dev_info *)shost->hostdata;
+	devinfo->intf = intf;
+	devinfo->udev = udev;
+	devinfo->resetting = 0;
+	devinfo->shutdown = 0;
+	devinfo->flags = dev_flags;
+	init_usb_anchor(&devinfo->cmd_urbs);
+	init_usb_anchor(&devinfo->sense_urbs);
+	init_usb_anchor(&devinfo->data_urbs);
+	spin_lock_init(&devinfo->lock);
+	INIT_WORK(&devinfo->work, uas_do_work);
+	INIT_WORK(&devinfo->scan_work, uas_scan_work);
+
+	result = uas_configure_endpoints(devinfo);
+	if (result)
+		goto set_alt0;
+
+	/*
+	 * 1 tag is reserved for untagged commands +
+	 * 1 tag to avoid off by one errors in some bridge firmwares
+	 */
+	shost->can_queue = devinfo->qdepth - 2;
+
+	usb_set_intfdata(intf, shost);
+	result = scsi_add_host(shost, &intf->dev);
+	if (result)
+		goto free_streams;
+
+	/* Submit the delayed_work for SCSI-device scanning */
+	schedule_work(&devinfo->scan_work);
+
+	return result;
+
+free_streams:
+	uas_free_streams(devinfo);
+	usb_set_intfdata(intf, NULL);
+set_alt0:
+	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
+	if (shost)
+		scsi_host_put(shost);
+	return result;
+}
+
+static int uas_cmnd_list_empty(struct uas_dev_info *devinfo)
+{
+	unsigned long flags;
+	int i, r = 1;
+
+	spin_lock_irqsave(&devinfo->lock, flags);
+
+	for (i = 0; i < devinfo->qdepth; i++) {
+		if (devinfo->cmnd[i]) {
+			r = 0; /* Not empty */
+			break;
+		}
+	}
+
+	spin_unlock_irqrestore(&devinfo->lock, flags);
+
+	return r;
+}
+
+/*
+ * Wait for any pending cmnds to complete, on usb-2 sense_urbs may temporarily
+ * get empty while there still is more work to do due to sense-urbs completing
+ * with a READ/WRITE_READY iu code, so keep waiting until the list gets empty.
+ */
+static int uas_wait_for_pending_cmnds(struct uas_dev_info *devinfo)
+{
+	unsigned long start_time;
+	int r;
+
+	start_time = jiffies;
+	do {
+		flush_work(&devinfo->work);
+
+		r = usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000);
+		if (r == 0)
+			return -ETIME;
+
+		r = usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500);
+		if (r == 0)
+			return -ETIME;
+
+		if (time_after(jiffies, start_time + 5 * HZ))
+			return -ETIME;
+	} while (!uas_cmnd_list_empty(devinfo));
+
+	return 0;
+}
+
+static int uas_pre_reset(struct usb_interface *intf)
+{
+	struct Scsi_Host *shost = usb_get_intfdata(intf);
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+	unsigned long flags;
+
+	if (devinfo->shutdown)
+		return 0;
+
+	/* Block new requests */
+	spin_lock_irqsave(shost->host_lock, flags);
+	scsi_block_requests(shost);
+	spin_unlock_irqrestore(shost->host_lock, flags);
+
+	if (uas_wait_for_pending_cmnds(devinfo) != 0) {
+		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
+		scsi_unblock_requests(shost);
+		return 1;
+	}
+
+	uas_free_streams(devinfo);
+
+	return 0;
+}
+
+static int uas_post_reset(struct usb_interface *intf)
+{
+	struct Scsi_Host *shost = usb_get_intfdata(intf);
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+	unsigned long flags;
+	int err;
+
+	if (devinfo->shutdown)
+		return 0;
+
+	err = uas_configure_endpoints(devinfo);
+	if (err && err != -ENODEV)
+		shost_printk(KERN_ERR, shost,
+			     "%s: alloc streams error %d after reset",
+			     __func__, err);
+
+	/* we must unblock the host in every case lest we deadlock */
+	spin_lock_irqsave(shost->host_lock, flags);
+	scsi_report_bus_reset(shost, 0);
+	spin_unlock_irqrestore(shost->host_lock, flags);
+
+	scsi_unblock_requests(shost);
+
+	return err ? 1 : 0;
+}
+
+static int uas_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct Scsi_Host *shost = usb_get_intfdata(intf);
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+
+	if (uas_wait_for_pending_cmnds(devinfo) != 0) {
+		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
+		return -ETIME;
+	}
+
+	return 0;
+}
+
+static int uas_resume(struct usb_interface *intf)
+{
+	return 0;
+}
+
+static int uas_reset_resume(struct usb_interface *intf)
+{
+	struct Scsi_Host *shost = usb_get_intfdata(intf);
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+	unsigned long flags;
+	int err;
+
+	err = uas_configure_endpoints(devinfo);
+	if (err) {
+		shost_printk(KERN_ERR, shost,
+			     "%s: alloc streams error %d after reset",
+			     __func__, err);
+		return -EIO;
+	}
+
+	spin_lock_irqsave(shost->host_lock, flags);
+	scsi_report_bus_reset(shost, 0);
+	spin_unlock_irqrestore(shost->host_lock, flags);
+
+	return 0;
+}
+
+static void uas_disconnect(struct usb_interface *intf)
+{
+	struct Scsi_Host *shost = usb_get_intfdata(intf);
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+	unsigned long flags;
+
+	spin_lock_irqsave(&devinfo->lock, flags);
+	devinfo->resetting = 1;
+	spin_unlock_irqrestore(&devinfo->lock, flags);
+
+	cancel_work_sync(&devinfo->work);
+	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
+	usb_kill_anchored_urbs(&devinfo->sense_urbs);
+	usb_kill_anchored_urbs(&devinfo->data_urbs);
+	uas_zap_pending(devinfo, DID_NO_CONNECT);
+
+	/*
+	 * Prevent SCSI scanning (if it hasn't started yet)
+	 * or wait for the SCSI-scanning routine to stop.
+	 */
+	cancel_work_sync(&devinfo->scan_work);
+
+	scsi_remove_host(shost);
+	uas_free_streams(devinfo);
+	scsi_host_put(shost);
+}
+
+/*
+ * Put the device back in usb-storage mode on shutdown, as some BIOS-es
+ * hang on reboot when the device is still in uas mode. Note the reset is
+ * necessary as some devices won't revert to usb-storage mode without it.
+ */
+static void uas_shutdown(struct device *dev)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct Scsi_Host *shost = usb_get_intfdata(intf);
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+
+	if (system_state != SYSTEM_RESTART)
+		return;
+
+	devinfo->shutdown = 1;
+	uas_free_streams(devinfo);
+	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
+	usb_reset_device(udev);
+}
+
+static struct usb_driver uas_driver = {
+	.name = "uas",
+	.probe = uas_probe,
+	.disconnect = uas_disconnect,
+	.pre_reset = uas_pre_reset,
+	.post_reset = uas_post_reset,
+	.suspend = uas_suspend,
+	.resume = uas_resume,
+	.reset_resume = uas_reset_resume,
+	.drvwrap.driver.shutdown = uas_shutdown,
+	.id_table = uas_usb_ids,
+};
+
+static int __init uas_init(void)
+{
+	int rv;
+
+	workqueue = alloc_workqueue("uas", WQ_MEM_RECLAIM, 0);
+	if (!workqueue)
+		return -ENOMEM;
+
+	rv = usb_register(&uas_driver);
+	if (rv) {
+		destroy_workqueue(workqueue);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void __exit uas_exit(void)
+{
+	usb_deregister(&uas_driver);
+	destroy_workqueue(workqueue);
+}
+
+module_init(uas_init);
+module_exit(uas_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(USB_STORAGE);
+MODULE_AUTHOR(
+	"Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp");
diff --git a/drivers/usb/storage/unusual_alauda.h b/drivers/usb/storage/unusual_alauda.h
new file mode 100644
index 000000000..13f61ec88
--- /dev/null
+++ b/drivers/usb/storage/unusual_alauda.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Unusual Devices File for the Alauda-based card readers
+ */
+
+#if defined(CONFIG_USB_STORAGE_ALAUDA) || \
+		defined(CONFIG_USB_STORAGE_ALAUDA_MODULE)
+
+UNUSUAL_DEV(  0x0584, 0x0008, 0x0102, 0x0102,
+		"Fujifilm",
+		"DPC-R1 (Alauda)",
+		USB_SC_SCSI, USB_PR_ALAUDA, init_alauda, 0),
+
+UNUSUAL_DEV(  0x07b4, 0x010a, 0x0102, 0x0102,
+		"Olympus",
+		"MAUSB-10 (Alauda)",
+		USB_SC_SCSI, USB_PR_ALAUDA, init_alauda, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_ALAUDA) || ... */
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
new file mode 100644
index 000000000..5df40759d
--- /dev/null
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Unusual Devices File for devices based on the Cypress USB/ATA bridge
+ *	with support for ATACB
+ */
+
+#if defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || \
+		defined(CONFIG_USB_STORAGE_CYPRESS_ATACB_MODULE)
+
+/* CY7C68300 : support atacb */
+UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
+		"Cypress",
+		"Cypress AT2LP",
+		USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
+
+/* CY7C68310 : support atacb and atacb2 */
+UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
+		"Cypress",
+		"Cypress ISD-300LP",
+		USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
+
+UNUSUAL_DEV( 0x14cd, 0x6116, 0x0150, 0x0160,
+		"Super Top",
+		"USB 2.0  SATA BRIDGE",
+		USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */
diff --git a/drivers/usb/storage/unusual_datafab.h b/drivers/usb/storage/unusual_datafab.h
new file mode 100644
index 000000000..5335b5d2b
--- /dev/null
+++ b/drivers/usb/storage/unusual_datafab.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Unusual Devices File for the Datafab USB Compact Flash reader
+ */
+
+#if defined(CONFIG_USB_STORAGE_DATAFAB) || \
+		defined(CONFIG_USB_STORAGE_DATAFAB_MODULE)
+
+UNUSUAL_DEV(  0x07c4, 0xa000, 0x0000, 0x0015,
+		"Datafab",
+		"MDCFE-B USB CF Reader",
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+		0),
+
+/*
+ * The following Datafab-based devices may or may not work
+ * using the current driver...the 0xffff is arbitrary since I
+ * don't know what device versions exist for these guys.
+ *
+ * The 0xa003 and 0xa004 devices in particular I'm curious about.
+ * I'm told they exist but so far nobody has come forward to say that
+ * they work with this driver.  Given the success we've had getting
+ * other Datafab-based cards operational with this driver, I've decided
+ * to leave these two devices in the list.
+ */
+UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
+		"SIIG/Datafab",
+		"SIIG/Datafab Memory Stick+CF Reader/Writer",
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+		0),
+
+/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
+UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
+		"Datafab/Unknown",
+		"MD2/MD3 Disk enclosure",
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+		US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
+		"Datafab/Unknown",
+		"Datafab-based Reader",
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+		0),
+
+UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
+		"Datafab/Unknown",
+		"Datafab-based Reader",
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+		0),
+
+UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
+		"PNY/Datafab",
+		"PNY/Datafab CF+SM Reader",
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+		0),
+
+UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
+		"Simple Tech/Datafab",
+		"Simple Tech/Datafab CF+SM Reader",
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+		0),
+
+/* Submitted by Olaf Hering <olh@suse.de> */
+UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
+		"Datafab Systems, Inc.",
+		"USB to CF + SM Combo (LC1)",
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+		0),
+
+/*
+ * Reported by Felix Moeller <felix@derklecks.de>
+ * in Germany this is sold by Hama with the productnumber 46952
+ * as "DualSlot CompactFlash(TM) & MStick Drive USB"
+ */
+UNUSUAL_DEV(  0x07c4, 0xa10b, 0x0000, 0xffff,
+		"DataFab Systems Inc.",
+		"USB CF+MS",
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+		0),
+
+UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
+		"Acomdata",
+		"CF",
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+		US_FL_SINGLE_LUN),
+
+#endif /* defined(CONFIG_USB_STORAGE_DATAFAB) || ... */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
new file mode 100644
index 000000000..fd6820437
--- /dev/null
+++ b/drivers/usb/storage/unusual_devs.h
@@ -0,0 +1,2466 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Driver for USB Mass Storage compliant devices
+ * Unusual Devices File
+ *
+ * Current development and maintenance by:
+ *   (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Initial work by:
+ *   (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
+ */
+
+/*
+ * IMPORTANT NOTE: This file must be included in another file which does
+ * the following thing for it to work:
+ * The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined
+ * before this file is included.
+ */
+
+/*
+ * If you edit this file, please try to keep it sorted first by VendorID,
+ * then by ProductID.
+ *
+ * If you want to add an entry for this file, be sure to include the
+ * following information:
+ *	- a patch that adds the entry for your device, including your
+ *	  email address right above the entry (plus maybe a brief
+ *	  explanation of the reason for the entry),
+ *	- a copy of /sys/kernel/debug/usb/devices with your device plugged in
+ *	  running with this patch.
+ * Send your submission to the USB development list <linux-usb@vger.kernel.org>
+ */
+
+/*
+ * Note: If you add an entry only in order to set the CAPACITY_OK flag,
+ * use the COMPLIANT_DEV macro instead of UNUSUAL_DEV.  This is
+ * because such entries mark devices which actually work correctly,
+ * as opposed to devices that do something strangely or wrongly.
+ */
+
+/*
+ * In-kernel mode switching is deprecated.  Do not add new devices to
+ * this list for the sole purpose of switching them to a different
+ * mode.  Existing userspace solutions are superior.
+ *
+ * New mode switching devices should instead be added to the database
+ * maintained at https://www.draisberghof.de/usb_modeswitch/
+ */
+
+#if !defined(CONFIG_USB_STORAGE_SDDR09) && \
+		!defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
+#define NO_SDDR09
+#endif
+
+/* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr> */
+UNUSUAL_DEV(  0x03eb, 0x2002, 0x0100, 0x0100,
+		"ATMEL",
+		"SND1 Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE),
+
+/* Reported by Rodolfo Quesada <rquesada@roqz.net> */
+UNUSUAL_DEV(  0x03ee, 0x6906, 0x0003, 0x0003,
+		"VIA Technologies Inc.",
+		"Mitsumi multi cardreader",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+UNUSUAL_DEV(  0x03f0, 0x0107, 0x0200, 0x0200,
+		"HP",
+		"CD-Writer+",
+		USB_SC_8070, USB_PR_CB, NULL, 0),
+
+/* Reported by Ben Efros <ben@pc-doctor.com> */
+UNUSUAL_DEV(  0x03f0, 0x070c, 0x0000, 0x0000,
+		"HP",
+		"Personal Media Drive",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SANE_SENSE ),
+
+/*
+ * Reported by Grant Grundler <grundler@parisc-linux.org>
+ * HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware.
+ */
+UNUSUAL_DEV(  0x03f0, 0x4002, 0x0001, 0x0001,
+		"HP",
+		"PhotoSmart R707",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
+
+UNUSUAL_DEV(  0x03f3, 0x0001, 0x0000, 0x9999,
+		"Adaptec",
+		"USBConnect 2000",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
+/*
+ * Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
+ * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
+ * for USB floppies that need the SINGLE_LUN enforcement.
+ */
+UNUSUAL_DEV(  0x0409, 0x0040, 0x0000, 0x9999,
+		"NEC",
+		"NEC USB UF000x",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
+
+/* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
+UNUSUAL_DEV(  0x040d, 0x6205, 0x0003, 0x0003,
+		"VIA Technologies Inc.",
+		"USB 2.0 Card Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/*
+ * Deduced by Jonathan Woithe <jwoithe@just42.net>
+ * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
+ * always fails and confuses drive.
+ */
+UNUSUAL_DEV(  0x0411, 0x001c, 0x0113, 0x0113,
+		"Buffalo",
+		"DUB-P40G HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_INQUIRY ),
+
+/* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */
+UNUSUAL_DEV(  0x0419, 0x0100, 0x0100, 0x0100,
+		"Samsung Info. Systems America, Inc.",
+		"MP3 Player",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Orgad Shaneh <orgads@gmail.com> */
+UNUSUAL_DEV(  0x0419, 0xaace, 0x0100, 0x0100,
+		"Samsung", "MP3 Player",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Christian Leber <christian@leber.de> */
+UNUSUAL_DEV(  0x0419, 0xaaf5, 0x0100, 0x0100,
+		"TrekStor",
+		"i.Beat 115 2.0",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ),
+
+/* Reported by Stefan Werner <dustbln@gmx.de> */
+UNUSUAL_DEV(  0x0419, 0xaaf6, 0x0100, 0x0100,
+		"TrekStor",
+		"i.Beat Joy 2.0",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Pete Zaitcev <zaitcev@redhat.com>, bz#176584 */
+UNUSUAL_DEV(  0x0420, 0x0001, 0x0100, 0x0100,
+		"GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/*
+ * Reported by Andrew Nayenko <relan@bk.ru>
+ * Updated for new firmware by Phillip Potter <phil@philpotter.co.uk>
+ */
+UNUSUAL_DEV(  0x0421, 0x0019, 0x0592, 0x0610,
+		"Nokia",
+		"Nokia 6288",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 ),
+
+/* Reported by Mario Rettig <mariorettig@web.de> */
+UNUSUAL_DEV(  0x0421, 0x042e, 0x0100, 0x0100,
+		"Nokia",
+		"Nokia 3250",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
+/* Reported by <honkkis@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x0433, 0x0100, 0x0100,
+		"Nokia",
+		"E70",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
+/* Reported by Jon Hart <Jon.Hart@web.de> */
+UNUSUAL_DEV(  0x0421, 0x0434, 0x0100, 0x0100,
+		"Nokia",
+		"E60",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
+
+/*
+ * Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
+ * Einar Th. Einarsson <einarthered@gmail.com>
+ */
+UNUSUAL_DEV(  0x0421, 0x0444, 0x0100, 0x0100,
+		"Nokia",
+		"N91",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
+/*
+ * Reported by Jiri Slaby <jirislaby@gmail.com> and
+ * Rene C. Castberg <Rene@Castberg.org>
+ */
+UNUSUAL_DEV(  0x0421, 0x0446, 0x0100, 0x0100,
+		"Nokia",
+		"N80",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
+/* Reported by Matthew Bloch <matthew@bytemark.co.uk> */
+UNUSUAL_DEV(  0x0421, 0x044e, 0x0100, 0x0100,
+		"Nokia",
+		"E61",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
+/* Reported by Bardur Arantsson <bardur@scientician.net> */
+UNUSUAL_DEV(  0x0421, 0x047c, 0x0370, 0x0610,
+		"Nokia",
+		"6131",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 ),
+
+/* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */
+UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999,
+		"Nokia",
+		"Nokia 6233",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 ),
+
+/* Reported by Alex Corcoles <alex@corcoles.net> */
+UNUSUAL_DEV(  0x0421, 0x0495, 0x0370, 0x0370,
+		"Nokia",
+		"6234",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 ),
+
+/* Reported by Daniele Forsi <dforsi@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x04b9, 0x0350, 0x0350,
+		"Nokia",
+		"5300",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 ),
+
+/* Patch submitted by Victor A. Santos <victoraur.santos@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x05af, 0x0742, 0x0742,
+		"Nokia",
+		"305",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64),
+
+/* Patch submitted by Mikhail Zolotaryov <lebon@lebon.org.ua> */
+UNUSUAL_DEV(  0x0421, 0x06aa, 0x1110, 0x1110,
+		"Nokia",
+		"502",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 ),
+
+#ifdef NO_SDDR09
+UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
+		"Microtech",
+		"CameraMate",
+		USB_SC_SCSI, USB_PR_CB, NULL,
+		US_FL_SINGLE_LUN ),
+#endif
+
+/*
+ * Patch submitted by Daniel Drake <dsd@gentoo.org>
+ * Device reports nonsense bInterfaceProtocol 6 when connected over USB2
+ */
+UNUSUAL_DEV(  0x0451, 0x5416, 0x0100, 0x0100,
+		"Neuros Audio",
+		"USB 2.0 HD 2.5",
+		USB_SC_DEVICE, USB_PR_BULK, NULL,
+		US_FL_NEED_OVERRIDE ),
+
+/*
+ * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559.
+ * The key does not actually break, but it returns zero sense which
+ * makes our SCSI stack to print confusing messages.
+ */
+UNUSUAL_DEV(  0x0457, 0x0150, 0x0100, 0x0100,
+		"USBest Technology",	/* sold by Transcend */
+		"USB Mass Storage Device",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+
+/*
+ * Bohdan Linda <bohdan.linda@gmail.com>
+ * 1GB USB sticks MyFlash High Speed. I have restricted
+ * the revision to my model only
+ */
+UNUSUAL_DEV(  0x0457, 0x0151, 0x0100, 0x0100,
+		"USB 2.0",
+		"Flash Disk",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NOT_LOCKABLE ),
+
+/*
+ * Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
+ * Obviously the PROM has not been customized by the VAR;
+ * the Vendor and Product string descriptors are:
+ *	Generic Mass Storage (PROTOTYPE--Remember to change idVendor)
+ *	Generic Manufacturer (PROTOTYPE--Remember to change idVendor)
+ */
+UNUSUAL_DEV(  0x045e, 0xffff, 0x0000, 0x0000,
+		"Mitac",
+		"GPS",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 ),
+
+/*
+ * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
+ * Reported by Pete Zaitcev <zaitcev@redhat.com>
+ * This device chokes on both version of MODE SENSE which we have, so
+ * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT.
+ */
+UNUSUAL_DEV(  0x046b, 0xff40, 0x0100, 0x0100,
+		"AMI",
+		"Virtual Floppy",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_WP_DETECT),
+
+/* Reported by Egbert Eich <eich@suse.com> */
+UNUSUAL_DEV(  0x0480, 0xd010, 0x0100, 0x9999,
+		"Toshiba",
+		"External USB 3.0",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_ALWAYS_SYNC),
+
+/* Patch submitted by Philipp Friedrich <philipp@void.at> */
+UNUSUAL_DEV(  0x0482, 0x0100, 0x0100, 0x0100,
+		"Kyocera",
+		"Finecam S3x",
+		USB_SC_8070, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
+
+/* Patch submitted by Philipp Friedrich <philipp@void.at> */
+UNUSUAL_DEV(  0x0482, 0x0101, 0x0100, 0x0100,
+		"Kyocera",
+		"Finecam S4",
+		USB_SC_8070, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
+
+/* Patch submitted by Stephane Galles <stephane.galles@free.fr> */
+UNUSUAL_DEV(  0x0482, 0x0103, 0x0100, 0x0100,
+		"Kyocera",
+		"Finecam S5",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
+
+/* Patch submitted by Jens Taprogge <jens.taprogge@taprogge.org> */
+UNUSUAL_DEV(  0x0482, 0x0107, 0x0100, 0x0100,
+		"Kyocera",
+		"CONTAX SL300R T*",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE),
+
+/*
+ * Reported by Paul Stewart <stewart@wetlogic.net>
+ * This entry is needed because the device reports Sub=ff
+ */
+UNUSUAL_DEV(  0x04a4, 0x0004, 0x0001, 0x0001,
+		"Hitachi",
+		"DVD-CAM DZ-MV100A Camcorder",
+		USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN),
+
+/*
+ * BENQ DC5330
+ * Reported by Manuel Fombuena <mfombuena@ya.com> and
+ * Frank Copeland <fjc@thingy.apana.org.au>
+ */
+UNUSUAL_DEV(  0x04a5, 0x3010, 0x0100, 0x0100,
+		"Tekom Technologies, Inc",
+		"300_CAMERA",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/*
+ * Patch for Nikon coolpix 2000
+ * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>
+ */
+UNUSUAL_DEV(  0x04b0, 0x0301, 0x0010, 0x0010,
+		"NIKON",
+		"NIKON DSC E2000",
+		USB_SC_DEVICE, USB_PR_DEVICE,NULL,
+		US_FL_NOT_LOCKABLE ),
+
+/* Reported by Doug Maxey (dwm@austin.ibm.com) */
+UNUSUAL_DEV(  0x04b3, 0x4001, 0x0110, 0x0110,
+		"IBM",
+		"IBM RSA2",
+		USB_SC_DEVICE, USB_PR_CB, NULL,
+		US_FL_MAX_SECTORS_MIN),
+
+/*
+ * Reported by Simon Levitt <simon@whattf.com>
+ * This entry needs Sub and Proto fields
+ */
+UNUSUAL_DEV(  0x04b8, 0x0601, 0x0100, 0x0100,
+		"Epson",
+		"875DC Storage",
+		USB_SC_SCSI, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
+
+/*
+ * Reported by Khalid Aziz <khalid@gonehiking.org>
+ * This entry is needed because the device reports Sub=ff
+ */
+UNUSUAL_DEV(  0x04b8, 0x0602, 0x0110, 0x0110,
+		"Epson",
+		"785EPX Storage",
+		USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_SINGLE_LUN),
+
+/*
+ * Reported by James Buren <braewoods+lkml@braewoods.net>
+ * Virtual ISOs cannot be remounted if ejected while the device is locked
+ * Disable locking to mimic Windows behavior that bypasses the issue
+ */
+UNUSUAL_DEV(  0x04c5, 0x2028, 0x0001, 0x0001,
+		"iODD",
+		"2531/2541",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE),
+
+/*
+ * Not sure who reported this originally but
+ * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
+ * flag be added */
+UNUSUAL_DEV(  0x04cb, 0x0100, 0x0000, 0x2210,
+		"Fujifilm",
+		"FinePix 1400Zoom",
+		USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
+
+/*
+ * Reported by Ondrej Zary <linux@zary.sk>
+ * The device reports one sector more and breaks when that sector is accessed
+ * Firmwares older than 2.6c (the latest one and the only that claims Linux
+ * support) have also broken tag handling
+ */
+UNUSUAL_DEV(  0x04ce, 0x0002, 0x0000, 0x026b,
+		"ScanLogic",
+		"SL11R-IDE",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
+UNUSUAL_DEV(  0x04ce, 0x0002, 0x026c, 0x026c,
+		"ScanLogic",
+		"SL11R-IDE",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY),
+
+/*
+ * Reported by Kriston Fincher <kriston@airmail.net>
+ * Patch submitted by Sean Millichamp <sean@bruenor.org>
+ * This is to support the Panasonic PalmCam PV-SD4090
+ * This entry is needed because the device reports Sub=ff 
+ */
+UNUSUAL_DEV(  0x04da, 0x0901, 0x0100, 0x0200,
+		"Panasonic",
+		"LS-120 Camera",
+		USB_SC_UFI, USB_PR_DEVICE, NULL, 0),
+
+/*
+ * From Yukihiro Nakai, via zaitcev@yahoo.com.
+ * This is needed for CB instead of CBI
+ */
+UNUSUAL_DEV(  0x04da, 0x0d05, 0x0000, 0x0000,
+		"Sharp CE-CW05",
+		"CD-R/RW Drive",
+		USB_SC_8070, USB_PR_CB, NULL, 0),
+
+/* Reported by Adriaan Penning <a.penning@luon.net> */
+UNUSUAL_DEV(  0x04da, 0x2372, 0x0000, 0x9999,
+		"Panasonic",
+		"DMC-LCx Camera",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
+
+/* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */
+UNUSUAL_DEV(  0x04da, 0x2373, 0x0000, 0x9999,
+		"LEICA",
+		"D-LUX Camera",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
+
+/*
+ * Most of the following entries were developed with the help of
+ * Shuttle/SCM directly.
+ */
+UNUSUAL_DEV(  0x04e6, 0x0001, 0x0200, 0x0200,
+		"Matshita",
+		"LS-120",
+		USB_SC_8020, USB_PR_CB, NULL, 0),
+
+UNUSUAL_DEV(  0x04e6, 0x0002, 0x0100, 0x0100,
+		"Shuttle",
+		"eUSCSI Bridge",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
+#ifdef NO_SDDR09
+UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
+		"SCM Microsystems",
+		"eUSB CompactFlash Adapter",
+		USB_SC_SCSI, USB_PR_CB, NULL,
+		US_FL_SINGLE_LUN),
+#endif
+
+/* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */
+UNUSUAL_DEV(  0x04e6, 0x0006, 0x0100, 0x0100,
+		"SCM Microsystems Inc.",
+		"eUSB MMC Adapter",
+		USB_SC_SCSI, USB_PR_CB, NULL,
+		US_FL_SINGLE_LUN),
+
+/* Reported by Daniel Nouri <dpunktnpunkt@web.de> */
+UNUSUAL_DEV(  0x04e6, 0x0006, 0x0205, 0x0205,
+		"Shuttle",
+		"eUSB MMC Adapter",
+		USB_SC_SCSI, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV(  0x04e6, 0x0007, 0x0100, 0x0200,
+		"Sony",
+		"Hifd",
+		USB_SC_SCSI, USB_PR_CB, NULL,
+		US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV(  0x04e6, 0x0009, 0x0200, 0x0200,
+		"Shuttle",
+		"eUSB ATA/ATAPI Adapter",
+		USB_SC_8020, USB_PR_CB, NULL, 0),
+
+UNUSUAL_DEV(  0x04e6, 0x000a, 0x0200, 0x0200,
+		"Shuttle",
+		"eUSB CompactFlash Adapter",
+		USB_SC_8020, USB_PR_CB, NULL, 0),
+
+UNUSUAL_DEV(  0x04e6, 0x000b, 0x0100, 0x0100,
+		"Shuttle",
+		"eUSCSI Bridge",
+		USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ), 
+
+UNUSUAL_DEV(  0x04e6, 0x000c, 0x0100, 0x0100,
+		"Shuttle",
+		"eUSCSI Bridge",
+		USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV(  0x04e6, 0x000f, 0x0000, 0x9999,
+		"SCM Microsystems",
+		"eUSB SCSI Adapter (Bus Powered)",
+		USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV(  0x04e6, 0x0101, 0x0200, 0x0200,
+		"Shuttle",
+		"CD-RW Device",
+		USB_SC_8020, USB_PR_CB, NULL, 0),
+
+/* Reported by Dmitry Khlystov <adminimus@gmail.com> */
+UNUSUAL_DEV(  0x04e8, 0x507c, 0x0220, 0x0220,
+		"Samsung",
+		"YP-U3",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64),
+
+/* Reported by Vitaly Kuznetsov <vitty@altlinux.ru> */
+UNUSUAL_DEV(  0x04e8, 0x5122, 0x0000, 0x9999,
+		"Samsung",
+		"YP-CP3",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 | US_FL_BULK_IGNORE_TAG),
+
+/* Added by Dmitry Artamonow <mad_soft@inbox.ru> */
+UNUSUAL_DEV(  0x04e8, 0x5136, 0x0000, 0x9999,
+		"Samsung",
+		"YP-Z3",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64),
+
+/*
+ * Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+ * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
+ * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
+ */
+UNUSUAL_DEV(  0x04fc, 0x80c2, 0x0100, 0x0100,
+		"Kobian Mercury",
+		"Binocam DCB-132",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BULK32),
+
+/* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
+UNUSUAL_DEV(  0x050d, 0x0115, 0x0133, 0x0133,
+		"Belkin",
+		"USB SCSI Adaptor",
+		USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
+/*
+ * Iomega Clik! Drive 
+ * Reported by David Chatenay <dchatenay@hotmail.com>
+ * The reason this is needed is not fully known.
+ */
+UNUSUAL_DEV(  0x0525, 0xa140, 0x0100, 0x0100,
+		"Iomega",
+		"USB Clik! 40",
+		USB_SC_8070, USB_PR_DEVICE, NULL,
+		US_FL_FIX_INQUIRY ),
+
+/* Added by Alan Stern <stern@rowland.harvard.edu> */
+COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999,
+		"Linux",
+		"File-backed Storage Gadget",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_CAPACITY_OK ),
+
+/*
+ * Yakumo Mega Image 37
+ * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
+UNUSUAL_DEV(  0x052b, 0x1801, 0x0100, 0x0100,
+		"Tekom Technologies, Inc",
+		"300_CAMERA",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/*
+ * Another Yakumo camera.
+ * Reported by Michele Alzetta <michele.alzetta@aliceposta.it>
+ */
+UNUSUAL_DEV(  0x052b, 0x1804, 0x0100, 0x0100,
+		"Tekom Technologies, Inc",
+		"300_CAMERA",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Iacopo Spalletti <avvisi@spalletti.it> */
+UNUSUAL_DEV(  0x052b, 0x1807, 0x0100, 0x0100,
+		"Tekom Technologies, Inc",
+		"300_CAMERA",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/*
+ * Yakumo Mega Image 47
+ * Reported by Bjoern Paetzel <kolrabi@kolrabi.de>
+ */
+UNUSUAL_DEV(  0x052b, 0x1905, 0x0100, 0x0100,
+		"Tekom Technologies, Inc",
+		"400_CAMERA",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/*
+ * Reported by Paul Ortyl <ortylp@3miasto.net>
+ * Note that it's similar to the device above, only different prodID
+ */
+UNUSUAL_DEV(  0x052b, 0x1911, 0x0100, 0x0100,
+		"Tekom Technologies, Inc",
+		"400_CAMERA",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+UNUSUAL_DEV(  0x054c, 0x0010, 0x0106, 0x0450,
+		"Sony",
+		"DSC-S30/S70/S75/505V/F505/F707/F717/P8",
+		USB_SC_SCSI, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
+
+/*
+ * Submitted by Lars Jacob <jacob.lars@googlemail.com>
+ * This entry is needed because the device reports Sub=ff
+ */
+UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0610,
+		"Sony",
+		"DSC-T1/T5/H5",
+		USB_SC_8070, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
+
+
+/* Reported by wim@geeks.nl */
+UNUSUAL_DEV(  0x054c, 0x0025, 0x0100, 0x0100,
+		"Sony",
+		"Memorystick NW-MS7",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
+
+/* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
+UNUSUAL_DEV(  0x054c, 0x002c, 0x0501, 0x2000,
+		"Sony",
+		"USB Floppy Drive",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
+
+UNUSUAL_DEV(  0x054c, 0x002d, 0x0100, 0x0100,
+		"Sony",
+		"Memorystick MSAC-US1",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
+
+/* Submitted by Klaus Mueller <k.mueller@intershop.de> */
+UNUSUAL_DEV(  0x054c, 0x002e, 0x0106, 0x0310,
+		"Sony",
+		"Handycam",
+		USB_SC_SCSI, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
+
+/* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */
+UNUSUAL_DEV(  0x054c, 0x002e, 0x0500, 0x0500,
+		"Sony",
+		"Handycam HC-85",
+		USB_SC_UFI, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
+
+UNUSUAL_DEV(  0x054c, 0x0032, 0x0000, 0x9999,
+		"Sony",
+		"Memorystick MSC-U01N",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
+
+/* Submitted by Michal Mlotek <mlotek@foobar.pl> */
+UNUSUAL_DEV(  0x054c, 0x0058, 0x0000, 0x9999,
+		"Sony",
+		"PEG N760c Memorystick",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_INQUIRY ),
+		
+UNUSUAL_DEV(  0x054c, 0x0069, 0x0000, 0x9999,
+		"Sony",
+		"Memorystick MSC-U03",
+		USB_SC_UFI, USB_PR_CB, NULL,
+		US_FL_SINGLE_LUN ),
+
+/* Submitted by Nathan Babb <nathan@lexi.com> */
+UNUSUAL_DEV(  0x054c, 0x006d, 0x0000, 0x9999,
+		"Sony",
+		"PEG Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_INQUIRY ),
+
+/* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */
+UNUSUAL_DEV(  0x054c, 0x0099, 0x0000, 0x9999,
+		"Sony",
+		"PEG Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_INQUIRY ),
+
+/* Submitted by Mike Alborn <malborn@deandra.homeip.net> */
+UNUSUAL_DEV(  0x054c, 0x016a, 0x0000, 0x9999,
+		"Sony",
+		"PEG Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_INQUIRY ),
+
+/* Submitted by Ren Bigcren <bigcren.ren@sonymobile.com> */
+UNUSUAL_DEV(  0x054c, 0x02a5, 0x0100, 0x0100,
+		"Sony Corp.",
+		"MicroVault Flash Drive",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_READ_CAPACITY_16 ),
+
+/* floppy reports multiple luns */
+UNUSUAL_DEV(  0x055d, 0x2020, 0x0000, 0x0210,
+		"SAMSUNG",
+		"SFD-321U [FW 0C]",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
+
+/* We keep this entry to force the transport; firmware 3.00 and later is ok. */
+UNUSUAL_DEV(  0x057b, 0x0000, 0x0000, 0x0299,
+		"Y-E Data",
+		"Flashbuster-U",
+		USB_SC_DEVICE,  USB_PR_CB, NULL,
+		US_FL_SINGLE_LUN),
+
+/*
+ * Reported by Johann Cardon <johann.cardon@free.fr>
+ * This entry is needed only because the device reports
+ * bInterfaceClass = 0xff (vendor-specific)
+ */
+UNUSUAL_DEV(  0x057b, 0x0022, 0x0000, 0x9999,
+		"Y-E Data",
+		"Silicon Media R/W",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0),
+
+/* Reported by RTE <raszilki@yandex.ru> */
+UNUSUAL_DEV(  0x058f, 0x6387, 0x0141, 0x0141,
+		"JetFlash",
+		"TS1GJF2A/120",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 ),
+
+/* Fabrizio Fellini <fello@libero.it> */
+UNUSUAL_DEV(  0x0595, 0x4343, 0x0000, 0x2210,
+		"Fujifilm",
+		"Digital Camera EX-20 DSC",
+		USB_SC_8070, USB_PR_DEVICE, NULL, 0 ),
+
+/*
+ * Reported by Andre Welter <a.r.welter@gmx.de>
+ * This antique device predates the release of the Bulk-only Transport
+ * spec, and if it gets a Get-Max-LUN then it requires the host to do a
+ * Clear-Halt on the bulk endpoints.  The SINGLE_LUN flag will prevent
+ * us from sending the request.
+ */
+UNUSUAL_DEV(  0x059b, 0x0001, 0x0100, 0x0100,
+		"Iomega",
+		"ZIP 100",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
+
+UNUSUAL_DEV(  0x059b, 0x0040, 0x0100, 0x0100,
+		"Iomega",
+		"Jaz USB Adapter",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
+
+/* Reported by <Hendryk.Pfeiffer@gmx.de> */
+UNUSUAL_DEV(  0x059f, 0x0643, 0x0000, 0x0000,
+		"LaCie",
+		"DVD+-RW",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_GO_SLOW ),
+
+/* Reported by Christian Schaller <cschalle@redhat.com> */
+UNUSUAL_DEV(  0x059f, 0x0651, 0x0000, 0x0000,
+		"LaCie",
+		"External HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_WP_DETECT ),
+
+/*
+ * Submitted by Joel Bourquard <numlock@freesurf.ch>
+ * Some versions of this device need the SubClass and Protocol overrides
+ * while others don't.
+ */
+UNUSUAL_DEV(  0x05ab, 0x0060, 0x1104, 0x1110,
+		"In-System",
+		"PyroGate External CD-ROM Enclosure (FCD-523)",
+		USB_SC_SCSI, USB_PR_BULK, NULL,
+		US_FL_NEED_OVERRIDE ),
+
+/*
+ * Submitted by Sven Anderson <sven-linux@anderson.de>
+ * There are at least four ProductIDs used for iPods, so I added 0x1202 and
+ * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears
+ * to change with firmware updates, I changed the range to maximum for all
+ * iPod entries.
+ */
+UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999,
+		"Apple",
+		"iPod",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
+/* Reported by Avi Kivity <avi@argo.co.il> */
+UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999,
+		"Apple",
+		"iPod",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
+UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999,
+		"Apple",
+		"iPod",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
+
+UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
+		"Apple",
+		"iPod",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
+/*
+ * Reported by Tyson Vinson <lornoss@gmail.com>
+ * This particular productId is the iPod Nano
+ */
+UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
+		"Apple",
+		"iPod",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
+/*
+ * Reported by Dan Williams <dcbw@redhat.com>
+ * Option N.V. mobile broadband modems
+ * Ignore driver CD mode and force into modem mode by default.
+ */
+
+/* Globetrotter HSDPA; mass storage shows up as Qualcomm for vendor */
+UNUSUAL_DEV(  0x05c6, 0x1000, 0x0000, 0x9999,
+		"Option N.V.",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init,
+		0),
+
+/* Reported by Blake Matheny <bmatheny@purdue.edu> */
+UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
+		"Lexar",
+		"USB CF Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_INQUIRY ),
+
+/*
+ * The following two entries are for a Genesys USB to IDE
+ * converter chip, but it changes its ProductId depending
+ * on whether or not a disk or an optical device is enclosed
+ * They were originally reported by Alexander Oltu
+ * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com>
+ * respectively.
+ *
+ * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz
+ * <phil@ipom.com> as these flags were made and hard-coded
+ * special-cases were pulled from scsiglue.c.
+ */
+UNUSUAL_DEV(  0x05e3, 0x0701, 0x0000, 0xffff,
+		"Genesys Logic",
+		"USB to IDE Optical",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
+
+UNUSUAL_DEV(  0x05e3, 0x0702, 0x0000, 0xffff,
+		"Genesys Logic",
+		"USB to IDE Disk",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Ben Efros <ben@pc-doctor.com> */
+UNUSUAL_DEV(  0x05e3, 0x0723, 0x9451, 0x9451,
+		"Genesys Logic",
+		"USB to SATA",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SANE_SENSE ),
+
+/*
+ * Reported by Hanno Boeck <hanno@gmx.de>
+ * Taken from the Lycoris Kernel
+ */
+UNUSUAL_DEV(  0x0636, 0x0003, 0x0000, 0x9999,
+		"Vivitar",
+		"Vivicam 35Xx",
+		USB_SC_SCSI, USB_PR_BULK, NULL,
+		US_FL_FIX_INQUIRY ),
+
+UNUSUAL_DEV(  0x0644, 0x0000, 0x0100, 0x0100,
+		"TEAC",
+		"Floppy Drive",
+		USB_SC_UFI, USB_PR_CB, NULL, 0 ),
+
+/* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
+UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
+		"SigmaTel",
+		"USBMSC Audio Player",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
+/* Reported by Daniel Kukula <daniel.kuku@gmail.com> */
+UNUSUAL_DEV( 0x067b, 0x1063, 0x0100, 0x0100,
+		"Prolific Technology, Inc.",
+		"Prolific Storage Gadget",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BAD_SENSE ),
+
+/* Reported by Rogerio Brito <rbrito@ime.usp.br> */
+UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001,
+		"Prolific Technology, Inc.",
+		"Mass Storage Device",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NOT_LOCKABLE ),
+
+/* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
+/*
+ * Change to bcdDeviceMin (0x0100 to 0x0001) reported by
+ * Thomas Bartosik <tbartdev@gmx-topmail.de>
+ */
+UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100,
+		"Prolific Technology Inc.",
+		"Mass Storage Device",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
+
+/* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
+UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0101,
+		"Prolific Technology Inc.",
+		"ATAPI-6 Bridge Controller",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
+
+/* Submitted by Benny Sjostrand <benny@hostmobility.com> */
+UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
+		"Minolta",
+		"Dimage F300",
+		USB_SC_SCSI, USB_PR_BULK, NULL, 0 ),
+
+/* Reported by Miguel A. Fosas <amn3s1a@ono.com> */
+UNUSUAL_DEV(  0x0686, 0x4017, 0x0001, 0x0001,
+		"Minolta",
+		"DIMAGE E223",
+		USB_SC_SCSI, USB_PR_DEVICE, NULL, 0 ),
+
+UNUSUAL_DEV(  0x0693, 0x0005, 0x0100, 0x0100,
+		"Hagiwara",
+		"Flashgate",
+		USB_SC_SCSI, USB_PR_BULK, NULL, 0 ),
+
+/* Reported by David Hamilton <niftimusmaximus@lycos.com> */
+UNUSUAL_DEV(  0x069b, 0x3004, 0x0001, 0x0001,
+		"Thomson Multimedia Inc.",
+		"RCA RD1080 MP3 Player",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
+UNUSUAL_DEV(  0x06ca, 0x2003, 0x0100, 0x0100,
+		"Newer Technology",
+		"uSCSI",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
+/* Reported by Adrian Pilchowiec <adi1981@epf.pl> */
+UNUSUAL_DEV(  0x071b, 0x3203, 0x0000, 0x0000,
+		"RockChip",
+		"MP3",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64 |
+		US_FL_NO_READ_CAPACITY_16),
+
+/*
+ * Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
+ * Support the following product :
+ *    "Dane-Elec MediaTouch"
+ */
+UNUSUAL_DEV(  0x071b, 0x32bb, 0x0000, 0x0000,
+		"RockChip",
+		"MTP",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
+
+/*
+ * Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
+ * This USB MP3/AVI player device fails and disconnects if more than 128
+ * sectors (64kB) are read/written in a single command, and may be present
+ * at least in the following products:
+ *   "Magnex Digital Video Panel DVP 1800"
+ *   "MP4 AIGO 4GB SLOT SD"
+ *   "Teclast TL-C260 MP3"
+ *   "i.Meizu PMP MP3/MP4"
+ *   "Speed MV8 MP4 Audio Player"
+ */
+UNUSUAL_DEV(  0x071b, 0x3203, 0x0100, 0x0100,
+		"RockChip",
+		"ROCK MP3",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64),
+
+/* Reported by Olivier Blondeau <zeitoun@gmail.com> */
+UNUSUAL_DEV(  0x0727, 0x0306, 0x0100, 0x0100,
+		"ATMEL",
+		"SND1 Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE),
+
+/* Submitted by Roman Hodek <roman@hodek.net> */
+UNUSUAL_DEV(  0x0781, 0x0001, 0x0200, 0x0200,
+		"Sandisk",
+		"ImageMate SDDR-05a",
+		USB_SC_SCSI, USB_PR_CB, NULL,
+		US_FL_SINGLE_LUN ),
+
+UNUSUAL_DEV(  0x0781, 0x0002, 0x0009, 0x0009,
+		"SanDisk Corporation",
+		"ImageMate CompactFlash USB",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
+UNUSUAL_DEV(  0x0781, 0x0100, 0x0100, 0x0100,
+		"Sandisk",
+		"ImageMate SDDR-12",
+		USB_SC_SCSI, USB_PR_CB, NULL,
+		US_FL_SINGLE_LUN ),
+
+/* Reported by Eero Volotinen <eero@ping-viini.org> */
+UNUSUAL_DEV(  0x07ab, 0xfccd, 0x0000, 0x9999,
+		"Freecom Technologies",
+		"FHD-Classic",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY),
+
+UNUSUAL_DEV(  0x07af, 0x0004, 0x0100, 0x0133,
+		"Microtech",
+		"USB-SCSI-DB25",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ), 
+
+UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100,
+		"Microtech",
+		"USB-SCSI-HD50",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
+#ifdef NO_SDDR09
+UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
+		"Microtech",
+		"CameraMate",
+		USB_SC_SCSI, USB_PR_CB, NULL,
+		US_FL_SINGLE_LUN ),
+#endif
+
+/*
+ * Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
+ * Only revision 1.13 tested (same for all of the above devices,
+ * based on the Datafab DF-UG-07 chip).  Needed for US_FL_FIX_INQUIRY.
+ * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>.
+ * See also http://martin.wilck.bei.t-online.de/#kecf .
+ */
+UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
+		"Datafab",
+		"KECF-USB",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
+
+/*
+ * Reported by Rauch Wolke <rauchwolke@gmx.net>
+ * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882)
+ */
+UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
+		"Simple Tech/Datafab",
+		"CF+SM Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ),
+
+/*
+ * Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
+ * to the USB storage specification in two ways:
+ * - They tell us they are using transport protocol CBI. In reality they
+ *   are using transport protocol CB.
+ * - They don't like the INQUIRY command. So we must handle this command
+ *   of the SCSI layer ourselves.
+ * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have
+ *   bInterfaceProtocol=0x00 (USB_PR_CBI) while others have 0x01 (USB_PR_CB).
+ *   So don't remove the USB_PR_CB override!
+ * - Cameras with bcdDevice=0x9009 require the USB_SC_8070 override.
+ */
+UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999,
+		"Casio",
+		"QV DigitalCamera",
+		USB_SC_8070, USB_PR_CB, NULL,
+		US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
+
+/* Submitted by Oleksandr Chumachenko <ledest@gmail.com> */
+UNUSUAL_DEV( 0x07cf, 0x1167, 0x0100, 0x0100,
+		"Casio",
+		"EX-N1 DigitalCamera",
+		USB_SC_8070, USB_PR_DEVICE, NULL, 0),
+
+/* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
+UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
+		"Samsung",
+		"Digimax 410",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_INQUIRY),
+
+/* Reported by Luciano Rocha <luciano@eurotux.com> */
+UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001,
+		"Argosy",
+		"Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY),
+
+/* Reported and patched by Nguyen Anh Quynh <aquynh@gmail.com> */
+UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001,
+		"Argosy",
+		"Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY),
+
+/* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */
+UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
+		"Argosy",
+		"Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY),
+
+/* Supplied with some Castlewood ORB removable drives */
+UNUSUAL_DEV(  0x084b, 0xa001, 0x0000, 0x9999,
+		"Castlewood Systems",
+		"USB to SCSI cable",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
+/*
+ * Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+ * Flag will support Bulk devices which use a standards-violating 32-byte
+ * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
+ * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
+ */
+
+UNUSUAL_DEV(  0x084d, 0x0011, 0x0110, 0x0110,
+		"Grandtech",
+		"DC2MEGA",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BULK32),
+
+/*
+ * Reported by <ttkspam@free.fr>
+ * The device reports a vendor-specific device class, requiring an
+ * explicit vendor/product match.
+ */
+UNUSUAL_DEV(  0x0851, 0x1542, 0x0002, 0x0002,
+		"MagicPixel",
+		"FW_Omega2",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0),
+
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
+ * on LUN 4.
+ * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
+ */
+UNUSUAL_DEV(  0x0851, 0x1543, 0x0200, 0x0200,
+		"PanDigital",
+		"Photo Frame",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NOT_LOCKABLE),
+
+UNUSUAL_DEV(  0x085a, 0x0026, 0x0100, 0x0133,
+		"Xircom",
+		"PortGear USB-SCSI (Mac USB Dock)",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV(  0x085a, 0x0028, 0x0100, 0x0133,
+		"Xircom",
+		"PortGear USB to SCSI Converter",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
+/* Submitted by Jan De Luyck <lkml@kcore.org> */
+UNUSUAL_DEV(  0x08bd, 0x1100, 0x0000, 0x0000,
+		"CITIZEN",
+		"X1DE-USB",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN),
+
+/*
+ * Submitted by Dylan Taft <d13f00l@gmail.com>
+ * US_FL_IGNORE_RESIDUE Needed
+ */
+UNUSUAL_DEV(  0x08ca, 0x3103, 0x0100, 0x0100,
+		"AIPTEK",
+		"Aiptek USB Keychain MP3 Player",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE),
+
+/*
+ * Entry needed for flags. Moreover, all devices with this ID use
+ * bulk-only transport, but _some_ falsely report Control/Bulk instead.
+ * One example is "Trumpion Digital Research MYMP3".
+ * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de>
+ */
+UNUSUAL_DEV(  0x090a, 0x1001, 0x0100, 0x0100,
+		"Trumpion",
+		"t33520 USB Flash Card Controller",
+		USB_SC_DEVICE, USB_PR_BULK, NULL,
+		US_FL_NEED_OVERRIDE ),
+
+/*
+ * Reported by Filippo Bardelli <filibard@libero.it>
+ * The device reports a subclass of RBC, which is wrong.
+ */
+UNUSUAL_DEV(  0x090a, 0x1050, 0x0100, 0x0100,
+		"Trumpion Microelectronics, Inc.",
+		"33520 USB Digital Voice Recorder",
+		USB_SC_UFI, USB_PR_DEVICE, NULL,
+		0),
+
+/* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
+UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
+		"Trumpion",
+		"MP3 player",
+		USB_SC_RBC, USB_PR_BULK, NULL,
+		0 ),
+
+/* aeb */
+UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
+		"Feiya",
+		"5-in-1 Card Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
+/*
+ * Reported by Icenowy Zheng <icenowy@aosc.io>
+ * The SMI SM3350 USB-UFS bridge controller will enter a wrong state
+ * that do not process read/write command if a long sense is requested,
+ * so force to use 18-byte sense.
+ */
+UNUSUAL_DEV(  0x090c, 0x3350, 0x0000, 0xffff,
+		"SMI",
+		"SM3350 UFS-to-USB-Mass-Storage bridge",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BAD_SENSE ),
+
+/*
+ * Reported by Paul Hartman <paul.hartman+linux@gmail.com>
+ * This card reader returns "Illegal Request, Logical Block Address
+ * Out of Range" for the first READ(10) after a new card is inserted.
+ */
+UNUSUAL_DEV(  0x090c, 0x6000, 0x0100, 0x0100,
+		"Feiya",
+		"SD/SDHC Card Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_INITIAL_READ10 ),
+
+/*
+ * Patch by Tasos Sahanidis <tasos@tasossah.com>
+ * This flash drive always shows up with write protect enabled
+ * during the first mode sense.
+ */
+UNUSUAL_DEV(0x0951, 0x1697, 0x0100, 0x0100,
+		"Kingston",
+		"DT Ultimate G3",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_WP_DETECT),
+
+/*
+ * This Pentax still camera is not conformant
+ * to the USB storage specification: -
+ * - It does not like the INQUIRY command. So we must handle this command
+ *   of the SCSI layer ourselves.
+ * Tested on Rev. 10.00 (0x1000)
+ * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
+ */
+UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
+		"Pentax",
+		"Optio 2/3/400",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_INQUIRY ),
+
+/*
+ * These are virtual windows driver CDs, which the zd1211rw driver
+ * automatically converts into WLAN devices.
+ */
+UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
+		"ZyXEL",
+		"G-220F USB-WLAN Install",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_DEVICE ),
+
+UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
+		"SiteCom",
+		"WL-117 USB-WLAN Install",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_DEVICE ),
+
+/*
+ * Reported by Dan Williams <dcbw@redhat.com>
+ * Option N.V. mobile broadband modems
+ * Ignore driver CD mode and force into modem mode by default.
+ */
+
+/* iCON 225 */
+UNUSUAL_DEV(  0x0af0, 0x6971, 0x0000, 0x9999,
+		"Option N.V.",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init,
+		0),
+
+/*
+ * Reported by F. Aben <f.aben@option.com>
+ * This device (wrongly) has a vendor-specific device descriptor.
+ * The entry is needed so usb-storage can bind to it's mass-storage
+ * interface as an interface driver
+ */
+UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
+		"Option",
+		"GI 0401 SD-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+/*
+ * Reported by Jan Dumon <j.dumon@option.com>
+ * These devices (wrongly) have a vendor-specific device descriptor.
+ * These entries are needed so usb-storage can bind to their mass-storage
+ * interface as an interface driver
+ */
+UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
+		"Option",
+		"GI 0431 SD-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7701, 0x0000, 0x0000,
+		"Option",
+		"GI 0451 SD-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7706, 0x0000, 0x0000,
+		"Option",
+		"GI 0451 SD-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7901, 0x0000, 0x0000,
+		"Option",
+		"GI 0452 SD-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7A01, 0x0000, 0x0000,
+		"Option",
+		"GI 0461 SD-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7A05, 0x0000, 0x0000,
+		"Option",
+		"GI 0461 SD-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x8300, 0x0000, 0x0000,
+		"Option",
+		"GI 033x SD-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x8302, 0x0000, 0x0000,
+		"Option",
+		"GI 033x SD-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x8304, 0x0000, 0x0000,
+		"Option",
+		"GI 033x SD-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xc100, 0x0000, 0x0000,
+		"Option",
+		"GI 070x SD-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd057, 0x0000, 0x0000,
+		"Option",
+		"GI 1505 SD-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd058, 0x0000, 0x0000,
+		"Option",
+		"GI 1509 SD-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd157, 0x0000, 0x0000,
+		"Option",
+		"GI 1515 SD-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd257, 0x0000, 0x0000,
+		"Option",
+		"GI 1215 SD-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd357, 0x0000, 0x0000,
+		"Option",
+		"GI 1505 SD-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+/* Reported by Namjae Jeon <namjae.jeon@samsung.com> */
+UNUSUAL_DEV(0x0bc2, 0x2300, 0x0000, 0x9999,
+		"Seagate",
+		"Portable HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_WRITE_CACHE),
+
+/* Reported by Ben Efros <ben@pc-doctor.com> */
+UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
+		"Seagate",
+		"FreeAgent Pro",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SANE_SENSE ),
+
+/* Reported by Kris Lindgren <kris.lindgren@gmail.com> */
+UNUSUAL_DEV( 0x0bc2, 0x3332, 0x0000, 0x9999,
+		"Seagate",
+		"External",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_WP_DETECT ),
+
+UNUSUAL_DEV(  0x0d49, 0x7310, 0x0000, 0x9999,
+		"Maxtor",
+		"USB to SATA",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SANE_SENSE),
+
+/*
+ * Pete Zaitcev <zaitcev@yahoo.com>, bz#164688.
+ * The device blatantly ignores LUN and returns 1 in GetMaxLUN.
+ */
+UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100,
+		"Unknown",
+		"Unknown",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
+
+/* Submitted by Joris Struyve <joris@struyve.be> */
+UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
+		"Medion",
+		"MD 7425",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_INQUIRY),
+
+/*
+ * Entry for Jenoptik JD 5200z3
+ *
+ * email: car.busse@gmx.de
+ */
+UNUSUAL_DEV(  0x0d96, 0x5200, 0x0001, 0x0200,
+		"Jenoptik",
+		"JD 5200 z3",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
+
+/* Reported by  Jason Johnston <killean@shaw.ca> */
+UNUSUAL_DEV(  0x0dc4, 0x0073, 0x0000, 0x0000,
+		"Macpower Technology Co.LTD.",
+		"USB 2.0 3.5\" DEVICE",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY),
+
+/*
+ * Reported by Lubomir Blaha <tritol@trilogic.cz>
+ * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this
+ * works for me. Can anybody correct these values? (I able to test corrected
+ * version.)
+ */
+UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
+		"Netac",
+		"USB-CF-Card",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_INQUIRY ),
+
+/*
+ * Reported by Edward Chapman (taken from linux-usb mailing list)
+ * Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive
+ */
+UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
+		"Netac",
+		"USB Flash Disk",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+
+/*
+ * Patch by Stephan Walter <stephan.walter@epfl.ch>
+ * I don't know why, but it works...
+ */
+UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
+		"WINWARD",
+		"Music Disk",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Ian McConnell <ian at emit.demon.co.uk> */
+UNUSUAL_DEV(  0x0dda, 0x0301, 0x0012, 0x0012,
+		"PNP_MP3",
+		"PNP_MP3 PLAYER",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Jim McCloskey <mcclosk@ucsc.edu> */
+UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100,
+		"Cowon Systems",
+		"iAUDIO M5",
+		USB_SC_DEVICE, USB_PR_BULK, NULL,
+		US_FL_NEED_OVERRIDE ),
+
+/* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
+UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
+		"USB",
+		"Solid state disk",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_INQUIRY ),
+
+/*
+ * Submitted by Daniel Drake <dsd@gentoo.org>
+ * Reported by dayul on the Gentoo Forums
+ */
+UNUSUAL_DEV(  0x0ea0, 0x2168, 0x0110, 0x0110,
+		"Ours Technology",
+		"Flash Disk",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */
+UNUSUAL_DEV(  0x0ea0, 0x6828, 0x0110, 0x0110,
+		"USB",
+		"Flash Disk",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/*
+ * Reported by Benjamin Schiller <sbenni@gmx.de>
+ * It is also sold by Easylite as DJ 20
+ */
+UNUSUAL_DEV(  0x0ed1, 0x7636, 0x0103, 0x0103,
+		"Typhoon",
+		"My DJ 1820",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
+
+/*
+ * Patch by Leonid Petrov mail at lpetrov.net
+ * Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org>
+ * http://www.qbik.ch/usb/devices/showdev.php?id=1705
+ * Updated to 103 device by MJ Ray mjr at phonecoop.coop
+ */
+UNUSUAL_DEV(  0x0f19, 0x0103, 0x0100, 0x0100,
+		"Oracom Co., Ltd",
+		"ORC-200M",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/*
+ * David Kuehling <dvdkhlng@gmx.de>:
+ * for MP3-Player AVOX WSX-300ER (bought in Japan).  Reports lots of SCSI
+ * errors when trying to write.
+ */
+UNUSUAL_DEV(  0x0f19, 0x0105, 0x0100, 0x0100,
+		"C-MEX",
+		"A-VOX",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/* Submitted by Nick Holloway */
+UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100,
+		"VTech",
+		"Kidizoom",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
+/* Reported by Moritz Moeller-Herrmann <moritz-kernel@moeller-herrmann.de> */
+UNUSUAL_DEV(  0x0fca, 0x8004, 0x0201, 0x0201,
+		"Research In Motion",
+		"BlackBerry Bold 9000",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 ),
+
+/* Reported by Michael Stattmann <michael@stattmann.com> */
+UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
+		"Sony Ericsson",
+		"V800-Vodafone 802",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_WP_DETECT ),
+
+/* Reported by The Solutor <thesolutor@gmail.com> */
+UNUSUAL_DEV(  0x0fce, 0xd0e1, 0x0000, 0x0000,
+		"Sony Ericsson",
+		"MD400",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_DEVICE),
+
+/*
+ * Reported by Jan Mate <mate@fiit.stuba.sk>
+ * and by Soeren Sonnenburg <kernel@nn7.de>
+ */
+UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
+		"Sony Ericsson",
+		"P990i",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
+UNUSUAL_DEV(  0x0fce, 0xe031, 0x0000, 0x0000,
+		"Sony Ericsson",
+		"M600i",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
+/* Reported by Ricardo Barberis <ricardo@dattatec.com> */
+UNUSUAL_DEV(  0x0fce, 0xe092, 0x0000, 0x0000,
+		"Sony Ericsson",
+		"P1i",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/*
+ * Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
+ * Tested on hardware version 1.10.
+ * Entry is needed only for the initializer function override.
+ * Devices with bcd > 110 seem to not need it while those
+ * with bcd < 110 appear to need it.
+ */
+UNUSUAL_DEV(  0x1019, 0x0c55, 0x0000, 0x0110,
+		"Desknote",
+		"UCR-61S2B",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_ucr61s2b_init,
+		0 ),
+
+UNUSUAL_DEV(  0x1058, 0x0704, 0x0000, 0x9999,
+		"Western Digital",
+		"External HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SANE_SENSE),
+
+/* Reported by Namjae Jeon <namjae.jeon@samsung.com> */
+UNUSUAL_DEV(0x1058, 0x070a, 0x0000, 0x9999,
+		"Western Digital",
+		"My Passport HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_WRITE_CACHE),
+
+/*
+ * Reported by Fabio Venturi <f.venturi@tdnet.it>
+ * The device reports a vendor-specific bDeviceClass.
+ */
+UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
+		"Actions Semiconductor",
+		"Mtp device",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0),
+
+/*
+ * Reported by Pascal Terjan <pterjan@mandriva.com>
+ * Ignore driver CD mode and force into modem mode by default.
+ */
+UNUSUAL_DEV(  0x1186, 0x3e04, 0x0000, 0x0000,
+           "D-Link",
+           "USB Mass Storage",
+           USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE),
+
+/*
+ * Reported by Kevin Lloyd <linux@sierrawireless.com>
+ * Entry is needed for the initializer function override,
+ * which instructs the device to load as a modem
+ * device.
+ */
+UNUSUAL_DEV(  0x1199, 0x0fff, 0x0000, 0x9999,
+		"Sierra Wireless",
+		"USB MMC Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, sierra_ms_init,
+		0),
+
+/*
+ * Reported by Jaco Kroon <jaco@kroon.co.za>
+ * The usb-storage module found on the Digitech GNX4 (and supposedly other
+ * devices) misbehaves and causes a bunch of invalid I/O errors.
+ */
+UNUSUAL_DEV(  0x1210, 0x0003, 0x0100, 0x0100,
+		"Digitech HMG",
+		"DigiTech Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/*
+ * Reported by fangxiaozhi <huananhu@huawei.com>
+ * This brings the HUAWEI data card devices into multi-port mode
+ */
+UNUSUAL_DEV(  0x12d1, 0x1001, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1003, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1004, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1401, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1402, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1403, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1404, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1405, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1406, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1407, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1408, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1409, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1410, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1411, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1412, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1413, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1414, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1415, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1416, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1417, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1418, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1419, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1420, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1421, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1422, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1423, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1424, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1425, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1426, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1427, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1428, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1429, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1430, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1431, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1432, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1433, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1434, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1435, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1436, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1437, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1438, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1439, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+
+/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
+UNUSUAL_DEV(  0x132b, 0x000b, 0x0001, 0x0001,
+		"Minolta",
+		"Dimage Z10",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		0 ),
+
+/* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */
+UNUSUAL_DEV(  0x1370, 0x6828, 0x0110, 0x0110,
+		"SWISSBIT",
+		"Black Silver",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/*
+ * Reported by Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
+ * The INIC-3619 bridge is used in the StarTech SLSODDU33B
+ * SATA-USB enclosure for slimline optical drives.
+ *
+ * The quirk enables MakeMKV to properly exchange keys with
+ * an installed BD drive.
+ */
+UNUSUAL_DEV(  0x13fd, 0x3609, 0x0209, 0x0209,
+		"Initio Corporation",
+		"INIC-3619",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Qinglin Ye <yestyle@gmail.com> */
+UNUSUAL_DEV(  0x13fe, 0x3600, 0x0100, 0x0100,
+		"Kingston",
+		"DT 101 G2",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BULK_IGNORE_TAG ),
+
+/* Reported by Francesco Foresti <frafore@tiscali.it> */
+UNUSUAL_DEV(  0x14cd, 0x6600, 0x0201, 0x0201,
+		"Super Top",
+		"IDE DEVICE",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Michael Büsch <m@bues.ch> */
+UNUSUAL_DEV(  0x152d, 0x0567, 0x0114, 0x0117,
+		"JMicron",
+		"USB to ATA/ATAPI Bridge",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BROKEN_FUA ),
+
+/* Reported by David Kozub <zub@linux.fjfi.cvut.cz> */
+UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999,
+		"JMicron",
+		"JMS567",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BROKEN_FUA),
+
+/*
+ * Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br>
+ * JMicron responds to USN and several other SCSI ioctls with a
+ * residue that causes subsequent I/O requests to fail.  */
+UNUSUAL_DEV(  0x152d, 0x2329, 0x0100, 0x0100,
+		"JMicron",
+		"USB to ATA/ATAPI Bridge",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
+
+/* Reported by Dmitry Nezhevenko <dion@dion.org.ua> */
+UNUSUAL_DEV(  0x152d, 0x2566, 0x0114, 0x0114,
+		"JMicron",
+		"USB to ATA/ATAPI Bridge",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BROKEN_FUA ),
+
+/* Reported by Teijo Kinnunen <teijo.kinnunen@code-q.fi> */
+UNUSUAL_DEV(  0x152d, 0x2567, 0x0117, 0x0117,
+		"JMicron",
+		"USB to ATA/ATAPI Bridge",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BROKEN_FUA ),
+
+/* Reported-by George Cherian <george.cherian@cavium.com> */
+UNUSUAL_DEV(0x152d, 0x9561, 0x0000, 0x9999,
+		"JMicron",
+		"JMS56x",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_REPORT_OPCODES),
+
+/*
+ * Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
+ * and Mac USB Dock USB-SCSI */
+UNUSUAL_DEV(  0x1645, 0x0007, 0x0100, 0x0133,
+		"Entrega Technologies",
+		"USB to SCSI Converter",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
+/*
+ * Reported by Robert Schedel <r.schedel@yahoo.de>
+ * Note: this is a 'super top' device like the above 14cd/6600 device
+ */
+UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
+		"Teac",
+		"HD-35PUK-B",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Oliver Neukum <oneukum@suse.com> */
+UNUSUAL_DEV(  0x174c, 0x55aa, 0x0100, 0x0100,
+		"ASMedia",
+		"AS2105",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NEEDS_CAP16),
+
+/* Reported by Jesse Feddema <jdfeddema@gmail.com> */
+UNUSUAL_DEV(  0x177f, 0x0400, 0x0000, 0x0000,
+		"Yarvik",
+		"PMP400",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
+
+UNUSUAL_DEV(  0x1822, 0x0001, 0x0000, 0x9999,
+		"Ariston Technologies",
+		"iConnect USB to SCSI adapter",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
+/*
+ * Reported by Hans de Goede <hdegoede@redhat.com>
+ * These Appotech controllers are found in Picture Frames, they provide a
+ * (buggy) emulation of a cdrom drive which contains the windows software
+ * Uploading of pictures happens over the corresponding /dev/sg device.
+ */
+UNUSUAL_DEV( 0x1908, 0x1315, 0x0000, 0x0000,
+		"BUILDWIN",
+		"Photo Frame",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BAD_SENSE ),
+UNUSUAL_DEV( 0x1908, 0x1320, 0x0000, 0x0000,
+		"BUILDWIN",
+		"Photo Frame",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BAD_SENSE ),
+UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200,
+		"BUILDWIN",
+		"Photo Frame",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_READ_DISC_INFO ),
+
+/*
+ * Reported by Matthias Schwarzott <zzam@gentoo.org>
+ * The Amazon Kindle treats SYNCHRONIZE CACHE as an indication that
+ * the host may be finished with it, and automatically ejects its
+ * emulated media unless it receives another command within one second.
+ */
+UNUSUAL_DEV( 0x1949, 0x0004, 0x0000, 0x9999,
+		"Amazon",
+		"Kindle",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SENSE_AFTER_SYNC ),
+
+/*
+ * Reported by Oliver Neukum <oneukum@suse.com>
+ * This device morphes spontaneously into another device if the access
+ * pattern of Windows isn't followed. Thus writable media would be dirty
+ * if the initial instance is used. So the device is limited to its
+ * virtual CD.
+ * And yes, the concept that BCD goes up to 9 is not heeded
+ */
+UNUSUAL_DEV( 0x19d2, 0x1225, 0x0000, 0xffff,
+		"ZTE,Incorporated",
+		"ZTE WCDMA Technologies MSM",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
+
+/*
+ * Reported by Sven Geggus <sven-usbst@geggus.net>
+ * This encrypted pen drive returns bogus data for the initial READ(10).
+ */
+UNUSUAL_DEV(  0x1b1c, 0x1ab5, 0x0200, 0x0200,
+		"Corsair",
+		"Padlock v2",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_INITIAL_READ10 ),
+
+/*
+ * Reported by Hans de Goede <hdegoede@redhat.com>
+ * These are mini projectors using USB for both power and video data transport
+ * The usb-storage interface is a virtual windows driver CD, which the gm12u320
+ * driver automatically converts into framebuffer & kms dri device nodes.
+ */
+UNUSUAL_DEV( 0x1de1, 0xc102, 0x0000, 0xffff,
+		"Grain-media Technology Corp.",
+		"USB3.0 Device GM12U320",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_DEVICE ),
+
+/*
+ * Patch by Richard Schütz <r.schtz@t-online.de>
+ * This external hard drive enclosure uses a JMicron chip which
+ * needs the US_FL_IGNORE_RESIDUE flag to work properly.
+ */
+UNUSUAL_DEV(  0x1e68, 0x001b, 0x0000, 0x0000,
+		"TrekStor GmbH & Co. KG",
+		"DataStation maxi g.u",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
+
+/* Reported by Jasper Mackenzie <scarletpimpernal@hotmail.com> */
+UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000,
+		"Coby Electronics",
+		"MP3 Player",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
+
+/* Reported by Witold Lipieta <witold.lipieta@thaumatec.com> */
+UNUSUAL_DEV( 0x1fc9, 0x0117, 0x0100, 0x0100,
+		"NXP Semiconductors",
+		"PN7462AU",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/* Supplied with some Castlewood ORB removable drives */
+UNUSUAL_DEV(  0x2027, 0xa001, 0x0000, 0x9999,
+		"Double-H Technology",
+		"USB to SCSI Intelligent Cable",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
+/*
+ * Reported by DocMAX <mail@vacharakis.de>
+ * and Thomas Weißschuh <linux@weissschuh.net>
+ */
+UNUSUAL_DEV( 0x2109, 0x0715, 0x9999, 0x9999,
+		"VIA Labs, Inc.",
+		"VL817 SATA Bridge",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
+
+UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
+		"ST",
+		"2A",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY),
+
+/*
+ * patch submitted by Davide Perini <perini.davide@dpsoftware.org>
+ * and Renato Perini <rperini@email.it>
+ */
+UNUSUAL_DEV(  0x22b8, 0x3010, 0x0001, 0x0001,
+		"Motorola",
+		"RAZR V3x",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
+
+/*
+ * Patch by Constantin Baranov <const@tltsu.ru>
+ * Report by Andreas Koenecke.
+ * Motorola ROKR Z6.
+ */
+UNUSUAL_DEV(  0x22b8, 0x6426, 0x0101, 0x0101,
+		"Motorola",
+		"MSnc.",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
+
+/* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
+UNUSUAL_DEV(  0x2735, 0x100b, 0x0000, 0x9999,
+		"MPIO",
+		"HS200",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_GO_SLOW ),
+
+/* Reported-by: Tim Anderson <tsa@biglakesoftware.com> */
+UNUSUAL_DEV(  0x2ca3, 0x0031, 0x0000, 0x9999,
+		"DJI",
+		"CineSSD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
+/*
+ * Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
+ * Mio Moov 330
+ */
+UNUSUAL_DEV(  0x3340, 0xffff, 0x0000, 0x0000,
+		"Mitac",
+		"Mio DigiWalker USB Sync",
+		USB_SC_DEVICE,USB_PR_DEVICE,NULL,
+		US_FL_MAX_SECTORS_64 ),
+
+/* Reported by Cyril Roelandt <tipecaml@gmail.com> */
+UNUSUAL_DEV(  0x357d, 0x7788, 0x0114, 0x0114,
+		"JMicron",
+		"USB to ATA/ATAPI Bridge",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BROKEN_FUA | US_FL_IGNORE_UAS ),
+
+/* Reported by Andrey Rahmatullin <wrar@altlinux.org> */
+UNUSUAL_DEV(  0x4102, 0x1020, 0x0100,  0x0100,
+		"iRiver",
+		"MP3 T10",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Sergey Pinaev <dfo@antex.ru> */
+UNUSUAL_DEV(  0x4102, 0x1059, 0x0000,  0x0000,
+               "iRiver",
+               "P7K",
+               USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+               US_FL_MAX_SECTORS_64 ),
+
+/*
+ * David Härdeman <david@2gen.com>
+ * The key makes the SCSI stack print confusing (but harmless) messages
+ */
+UNUSUAL_DEV(  0x4146, 0xba01, 0x0100, 0x0100,
+		"Iomega",
+		"Micro Mini 1GB",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+
+/* "G-DRIVE" external HDD hangs on write without these.
+ * Patch submitted by Alexander Kappner <agk@godking.net>
+ */
+UNUSUAL_DEV(0x4971, 0x8024, 0x0000, 0x9999,
+		"SimpleTech",
+		"External HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_ALWAYS_SYNC),
+
+/*
+ * Nick Bowler <nbowler@elliptictech.com>
+ * SCSI stack spams (otherwise harmless) error messages.
+ */
+UNUSUAL_DEV(  0xc251, 0x4003, 0x0100, 0x0100,
+		"Keil Software, Inc.",
+		"V2M MotherBoard",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NOT_LOCKABLE),
+
+/* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
+UNUSUAL_DEV(  0xed06, 0x4500, 0x0001, 0x0001,
+		"DataStor",
+		"USB4500 FW1.04",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_CAPACITY_HEURISTICS),
+
+/* Reported by Alessio Treglia <quadrispro@ubuntu.com> */
+UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001,
+		"TGE",
+		"Digital MP3 Audio Player",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+
+/* Unusual uas devices */
+#if IS_ENABLED(CONFIG_USB_UAS)
+#include "unusual_uas.h"
+#endif
+
+/* Control/Bulk transport for all SubClass values */
+USUAL_DEV(USB_SC_RBC, USB_PR_CB),
+USUAL_DEV(USB_SC_8020, USB_PR_CB),
+USUAL_DEV(USB_SC_QIC, USB_PR_CB),
+USUAL_DEV(USB_SC_UFI, USB_PR_CB),
+USUAL_DEV(USB_SC_8070, USB_PR_CB),
+USUAL_DEV(USB_SC_SCSI, USB_PR_CB),
+
+/* Control/Bulk/Interrupt transport for all SubClass values */
+USUAL_DEV(USB_SC_RBC, USB_PR_CBI),
+USUAL_DEV(USB_SC_8020, USB_PR_CBI),
+USUAL_DEV(USB_SC_QIC, USB_PR_CBI),
+USUAL_DEV(USB_SC_UFI, USB_PR_CBI),
+USUAL_DEV(USB_SC_8070, USB_PR_CBI),
+USUAL_DEV(USB_SC_SCSI, USB_PR_CBI),
+
+/* Bulk-only transport for all SubClass values */
+USUAL_DEV(USB_SC_RBC, USB_PR_BULK),
+USUAL_DEV(USB_SC_8020, USB_PR_BULK),
+USUAL_DEV(USB_SC_QIC, USB_PR_BULK),
+USUAL_DEV(USB_SC_UFI, USB_PR_BULK),
+USUAL_DEV(USB_SC_8070, USB_PR_BULK),
+USUAL_DEV(USB_SC_SCSI, USB_PR_BULK),
diff --git a/drivers/usb/storage/unusual_ene_ub6250.h b/drivers/usb/storage/unusual_ene_ub6250.h
new file mode 100644
index 000000000..a3b32abc2
--- /dev/null
+++ b/drivers/usb/storage/unusual_ene_ub6250.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#if defined(CONFIG_USB_STORAGE_ENE_UB6250) || \
+		defined(CONFIG_USB_STORAGE_ENE_UB6250_MODULE)
+
+UNUSUAL_DEV(0x0cf2, 0x6250, 0x0000, 0x9999,
+		"ENE",
+		"ENE UB6250 reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_ENE_UB6250) || ... */
diff --git a/drivers/usb/storage/unusual_freecom.h b/drivers/usb/storage/unusual_freecom.h
new file mode 100644
index 000000000..9ca686364
--- /dev/null
+++ b/drivers/usb/storage/unusual_freecom.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Unusual Devices File for the Freecom USB/IDE adaptor
+ */
+
+#if defined(CONFIG_USB_STORAGE_FREECOM) || \
+		defined(CONFIG_USB_STORAGE_FREECOM_MODULE)
+
+UNUSUAL_DEV(  0x07ab, 0xfc01, 0x0000, 0x9999,
+		"Freecom",
+		"USB-IDE",
+		USB_SC_QIC, USB_PR_FREECOM, init_freecom, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_FREECOM) || ... */
diff --git a/drivers/usb/storage/unusual_isd200.h b/drivers/usb/storage/unusual_isd200.h
new file mode 100644
index 000000000..f248190bd
--- /dev/null
+++ b/drivers/usb/storage/unusual_isd200.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Unusual Devices File for In-System Design, Inc. ISD200 ASIC
+ */
+
+#if defined(CONFIG_USB_STORAGE_ISD200) || \
+		defined(CONFIG_USB_STORAGE_ISD200_MODULE)
+
+UNUSUAL_DEV(  0x054c, 0x002b, 0x0100, 0x0110,
+		"Sony",
+		"Portable USB Harddrive V2",
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
+		0),
+
+UNUSUAL_DEV(  0x05ab, 0x0031, 0x0100, 0x0110,
+		"In-System",
+		"USB/IDE Bridge (ATA/ATAPI)",
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
+		0),
+
+UNUSUAL_DEV(  0x05ab, 0x0301, 0x0100, 0x0110,
+		"In-System",
+		"Portable USB Harddrive V2",
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
+		0),
+
+UNUSUAL_DEV(  0x05ab, 0x0351, 0x0100, 0x0110,
+		"In-System",
+		"Portable USB Harddrive V2",
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
+		0),
+
+UNUSUAL_DEV(  0x05ab, 0x5701, 0x0100, 0x0110,
+		"In-System",
+		"USB Storage Adapter V2",
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
+		0),
+
+UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
+		"ATI",
+		"USB Cable 205",
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
+		0),
+
+#endif /* defined(CONFIG_USB_STORAGE_ISD200) || ... */
diff --git a/drivers/usb/storage/unusual_jumpshot.h b/drivers/usb/storage/unusual_jumpshot.h
new file mode 100644
index 000000000..44878f849
--- /dev/null
+++ b/drivers/usb/storage/unusual_jumpshot.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Unusual Devices File for the Lexar "Jumpshot" Compact Flash reader
+ */
+
+#if defined(CONFIG_USB_STORAGE_JUMPSHOT) || \
+		defined(CONFIG_USB_STORAGE_JUMPSHOT_MODULE)
+
+UNUSUAL_DEV(  0x05dc, 0x0001, 0x0000, 0x0001,
+		"Lexar",
+		"Jumpshot USB CF Reader",
+		USB_SC_SCSI, USB_PR_JUMPSHOT, NULL,
+		US_FL_NEED_OVERRIDE),
+
+#endif /* defined(CONFIG_USB_STORAGE_JUMPSHOT) || ... */
diff --git a/drivers/usb/storage/unusual_karma.h b/drivers/usb/storage/unusual_karma.h
new file mode 100644
index 000000000..9fbed4cbc
--- /dev/null
+++ b/drivers/usb/storage/unusual_karma.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Unusual Devices File for the Rio Karma
+ */
+
+#if defined(CONFIG_USB_STORAGE_KARMA) || \
+		defined(CONFIG_USB_STORAGE_KARMA_MODULE)
+
+UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
+		"Rio",
+		"Rio Karma",
+		USB_SC_SCSI, USB_PR_KARMA, rio_karma_init, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_KARMA) || ... */
diff --git a/drivers/usb/storage/unusual_onetouch.h b/drivers/usb/storage/unusual_onetouch.h
new file mode 100644
index 000000000..cdfee8f6c
--- /dev/null
+++ b/drivers/usb/storage/unusual_onetouch.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Unusual Devices File for the Maxtor OneTouch USB hard drive's button
+ */
+
+#if defined(CONFIG_USB_STORAGE_ONETOUCH) || \
+		defined(CONFIG_USB_STORAGE_ONETOUCH_MODULE)
+
+/*
+ * Submitted by: Nick Sillik <n.sillik@temple.edu>
+ * Needed for OneTouch extension to usb-storage
+ */
+UNUSUAL_DEV(  0x0d49, 0x7000, 0x0000, 0x9999,
+		"Maxtor",
+		"OneTouch External Harddrive",
+		USB_SC_DEVICE, USB_PR_DEVICE, onetouch_connect_input,
+		0),
+
+UNUSUAL_DEV(  0x0d49, 0x7010, 0x0000, 0x9999,
+		"Maxtor",
+		"OneTouch External Harddrive",
+		USB_SC_DEVICE, USB_PR_DEVICE, onetouch_connect_input,
+		0),
+
+#endif /* defined(CONFIG_USB_STORAGE_ONETOUCH) || ... */
diff --git a/drivers/usb/storage/unusual_realtek.h b/drivers/usb/storage/unusual_realtek.h
new file mode 100644
index 000000000..945dcb19d
--- /dev/null
+++ b/drivers/usb/storage/unusual_realtek.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Driver for Realtek RTS51xx USB card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * Author:
+ *   wwang (wei_wang@realsil.com.cn)
+ *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#if defined(CONFIG_USB_STORAGE_REALTEK) || \
+		defined(CONFIG_USB_STORAGE_REALTEK_MODULE)
+
+UNUSUAL_DEV(0x0bda, 0x0138, 0x0000, 0x9999,
+		"Realtek",
+		"USB Card Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
+UNUSUAL_DEV(0x0bda, 0x0153, 0x0000, 0x9999,
+		"Realtek",
+		"USB Card Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
+UNUSUAL_DEV(0x0bda, 0x0158, 0x0000, 0x9999,
+		"Realtek",
+		"USB Card Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
+UNUSUAL_DEV(0x0bda, 0x0159, 0x0000, 0x9999,
+		"Realtek",
+		"USB Card Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
+UNUSUAL_DEV(0x0bda, 0x0177, 0x0000, 0x9999,
+		"Realtek",
+		"USB Card Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
+UNUSUAL_DEV(0x0bda, 0x0184, 0x0000, 0x9999,
+		"Realtek",
+		"USB Card Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
+#endif  /* defined(CONFIG_USB_STORAGE_REALTEK) || ... */
diff --git a/drivers/usb/storage/unusual_sddr09.h b/drivers/usb/storage/unusual_sddr09.h
new file mode 100644
index 000000000..bfb650974
--- /dev/null
+++ b/drivers/usb/storage/unusual_sddr09.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Unusual Devices File for SanDisk SDDR-09 SmartMedia reader
+ */
+
+#if defined(CONFIG_USB_STORAGE_SDDR09) || \
+		defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
+
+UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
+		"Microtech",
+		"CameraMate (DPCM_USB)",
+		USB_SC_SCSI, USB_PR_DPCM_USB, NULL, 0),
+
+UNUSUAL_DEV(  0x04e6, 0x0003, 0x0000, 0x9999,
+		"Sandisk",
+		"ImageMate SDDR09",
+		USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		0),
+
+/* This entry is from Andries.Brouwer@cwi.nl */
+UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
+		"SCM Microsystems",
+		"eUSB SmartMedia / CompactFlash Adapter",
+		USB_SC_SCSI, USB_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
+		0),
+
+UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100,
+		"Olympus",
+		"Camedia MAUSB-2",
+		USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		0),
+
+UNUSUAL_DEV(  0x0781, 0x0200, 0x0000, 0x9999,
+		"Sandisk",
+		"ImageMate SDDR-09",
+		USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		0),
+
+UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
+		"Microtech",
+		"CameraMate (DPCM_USB)",
+		USB_SC_SCSI, USB_PR_DPCM_USB, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_SDDR09) || ... */
diff --git a/drivers/usb/storage/unusual_sddr55.h b/drivers/usb/storage/unusual_sddr55.h
new file mode 100644
index 000000000..6d6f76eb0
--- /dev/null
+++ b/drivers/usb/storage/unusual_sddr55.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Unusual Devices File for SanDisk SDDR-55 SmartMedia reader
+ */
+
+#if defined(CONFIG_USB_STORAGE_SDDR55) || \
+		defined(CONFIG_USB_STORAGE_SDDR55_MODULE)
+
+/* Contributed by Peter Waechtler */
+UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
+		"Datafab",
+		"MDSM-B reader",
+		USB_SC_SCSI, USB_PR_SDDR55, NULL,
+		US_FL_FIX_INQUIRY),
+
+/* SM part - aeb <Andries.Brouwer@cwi.nl> */
+UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
+		"Datafab Systems, Inc.",
+		"USB to CF + SM Combo (LC1)",
+		USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
+
+UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
+		"Acomdata",
+		"SM",
+		USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
+
+UNUSUAL_DEV(  0x55aa, 0xa103, 0x0000, 0x9999,
+		"Sandisk",
+		"ImageMate SDDR55",
+		USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_SDDR55) || ... */
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
new file mode 100644
index 000000000..1f8c9b16a
--- /dev/null
+++ b/drivers/usb/storage/unusual_uas.h
@@ -0,0 +1,187 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Driver for USB Attached SCSI devices - Unusual Devices File
+ *
+ *   (c) 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on the same file for the usb-storage driver, which is:
+ *   (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *   (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
+ */
+
+/*
+ * IMPORTANT NOTE: This file must be included in another file which defines
+ * a UNUSUAL_DEV macro before this file is included.
+ */
+
+/*
+ * If you edit this file, please try to keep it sorted first by VendorID,
+ * then by ProductID.
+ *
+ * If you want to add an entry for this file, be sure to include the
+ * following information:
+ *	- a patch that adds the entry for your device, including your
+ *	  email address right above the entry (plus maybe a brief
+ *	  explanation of the reason for the entry),
+ *	- lsusb -v output for the device
+ * Send your submission to Hans de Goede <hdegoede@redhat.com>
+ * and don't forget to CC: the USB development list <linux-usb@vger.kernel.org>
+ */
+
+/* Reported-by: Till Dörges <doerges@pre-sense.de> */
+UNUSUAL_DEV(0x054c, 0x087d, 0x0000, 0x9999,
+		"Sony",
+		"PSZ-HA*",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_REPORT_OPCODES),
+
+/*
+ *  Initially Reported-by: Julian Groß <julian.g@posteo.de>
+ *  Further reports David C. Partridge <david.partridge@perdrix.co.uk>
+ */
+UNUSUAL_DEV(0x059f, 0x105f, 0x0000, 0x9999,
+		"LaCie",
+		"2Big Quadra USB3",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME),
+
+/* Reported-by: Julian Sikorski <belegdol@gmail.com> */
+UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x9999,
+		"LaCie",
+		"Rugged USB3-FW",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME),
+
+/* Reported-by: Hongling Zeng <zenghongling@kylinos.cn> */
+UNUSUAL_DEV(0x090c, 0x2000, 0x0000, 0x9999,
+		"Hiksemi",
+		"External HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
+
+/*
+ * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI
+ * commands in UAS mode.  Observed with the 1.28 firmware; are there others?
+ */
+UNUSUAL_DEV(0x0984, 0x0301, 0x0128, 0x0128,
+		"Apricorn",
+		"",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
+
+/* Reported-by: Tom Hu <huxiaoying@kylinos.cn> */
+UNUSUAL_DEV(0x0b05, 0x1932, 0x0000, 0x9999,
+		"ASUS",
+		"External HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
+
+/* Reported-by: David Webb <djw@noc.ac.uk> */
+UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999,
+		"Seagate",
+		"Expansion Desk",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_REPORT_LUNS),
+
+/* Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> */
+UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999,
+		"Initio Corporation",
+		"INIC-3069",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X | US_FL_IGNORE_RESIDUE),
+
+/* Reported-by: Tom Arild Naess <tanaess@gmail.com> */
+UNUSUAL_DEV(0x152d, 0x0539, 0x0000, 0x9999,
+		"JMicron",
+		"JMS539",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_REPORT_OPCODES),
+
+/* Reported-by: Claudio Bizzarri <claudio.bizzarri@gmail.com> */
+UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999,
+		"JMicron",
+		"JMS567",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BROKEN_FUA | US_FL_NO_REPORT_OPCODES),
+
+/* Reported-by: David Kozub <zub@linux.fjfi.cvut.cz> */
+UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999,
+		"JMicron",
+		"JMS567",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BROKEN_FUA),
+
+/* Reported by: Yaroslav Furman <yaro330@gmail.com> */
+UNUSUAL_DEV(0x152d, 0x0583, 0x0000, 0x9999,
+		"JMicron",
+		"JMS583Gen 2",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_REPORT_OPCODES),
+
+/* Reported-by: Thinh Nguyen <thinhn@synopsys.com> */
+UNUSUAL_DEV(0x154b, 0xf00b, 0x0000, 0x9999,
+		"PNY",
+		"Pro Elite SSD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
+/* Reported-by: Thinh Nguyen <thinhn@synopsys.com> */
+UNUSUAL_DEV(0x154b, 0xf00d, 0x0000, 0x9999,
+		"PNY",
+		"Pro Elite SSD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
+/* Reported-by: Hongling Zeng <zenghongling@kylinos.cn> */
+UNUSUAL_DEV(0x17ef, 0x3899, 0x0000, 0x9999,
+		"Thinkplus",
+		"External HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
+
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
+		"VIA",
+		"VL711",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
+/* Reported-by: Icenowy Zheng <icenowy@aosc.io> */
+UNUSUAL_DEV(0x2537, 0x1068, 0x0000, 0x9999,
+		"Norelsys",
+		"NS1068X",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
+
+/*
+ * Initially Reported-by: Takeo Nakayama <javhera@gmx.com>
+ * UAS Ignore Reported by Steven Ellis <sellis@redhat.com>
+ */
+UNUSUAL_DEV(0x357d, 0x7788, 0x0000, 0x9999,
+		"JMicron",
+		"JMS566",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_REPORT_OPCODES | US_FL_IGNORE_UAS),
+
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x4971, 0x1012, 0x0000, 0x9999,
+		"Hitachi",
+		"External HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
+
+/* Reported-by: Richard Henderson <rth@redhat.com> */
+UNUSUAL_DEV(0x4971, 0x8017, 0x0000, 0x9999,
+		"SimpleTech",
+		"External HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_REPORT_OPCODES),
+
+/* "G-DRIVE" external HDD hangs on write without these.
+ * Patch submitted by Alexander Kappner <agk@godking.net>
+ */
+UNUSUAL_DEV(0x4971, 0x8024, 0x0000, 0x9999,
+		"SimpleTech",
+		"External HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_ALWAYS_SYNC),
diff --git a/drivers/usb/storage/unusual_usbat.h b/drivers/usb/storage/unusual_usbat.h
new file mode 100644
index 000000000..f9d3e5efc
--- /dev/null
+++ b/drivers/usb/storage/unusual_usbat.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Unusual Devices File for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
+ */
+
+#if defined(CONFIG_USB_STORAGE_USBAT) || \
+		defined(CONFIG_USB_STORAGE_USBAT_MODULE)
+
+UNUSUAL_DEV(  0x03f0, 0x0207, 0x0001, 0x0001,
+		"HP",
+		"CD-Writer+ 8200e",
+		USB_SC_8070, USB_PR_USBAT, init_usbat_cd, 0),
+
+UNUSUAL_DEV(  0x03f0, 0x0307, 0x0001, 0x0001,
+		"HP",
+		"CD-Writer+ CD-4e",
+		USB_SC_8070, USB_PR_USBAT, init_usbat_cd, 0),
+
+UNUSUAL_DEV(  0x04e6, 0x1010, 0x0000, 0x9999,
+		"Shuttle/SCM",
+		"USBAT-02",
+		USB_SC_SCSI, USB_PR_USBAT, init_usbat_flash,
+		US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV(  0x0781, 0x0005, 0x0005, 0x0005,
+		"Sandisk",
+		"ImageMate SDDR-05b",
+		USB_SC_SCSI, USB_PR_USBAT, init_usbat_flash,
+		US_FL_SINGLE_LUN),
+
+#endif /* defined(CONFIG_USB_STORAGE_USBAT) || ... */
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
new file mode 100644
index 000000000..ed7c6ad96
--- /dev/null
+++ b/drivers/usb/storage/usb.c
@@ -0,0 +1,1159 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for USB Mass Storage compliant devices
+ *
+ * Current development and maintenance by:
+ *   (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Developed with the assistance of:
+ *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
+ *   (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu)
+ *
+ * Initial work by:
+ *   (c) 1999 Michael Gee (michael@linuxspecific.com)
+ *
+ * usb_device_id support by Adam J. Richter (adam@yggdrasil.com):
+ *   (c) 2000 Yggdrasil Computing, Inc.
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices.  Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document.  The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ */
+
+#ifdef CONFIG_USB_STORAGE_DEBUG
+#define DEBUG
+#endif
+
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/utsname.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "scsiglue.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "initializers.h"
+
+#include "sierra_ms.h"
+#include "option_ms.h"
+
+#if IS_ENABLED(CONFIG_USB_UAS)
+#include "uas-detect.h"
+#endif
+
+#define DRV_NAME "usb-storage"
+
+/* Some informational data */
+MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
+MODULE_DESCRIPTION("USB Mass Storage driver for Linux");
+MODULE_LICENSE("GPL");
+
+static unsigned int delay_use = 1;
+module_param(delay_use, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
+
+static char quirks[128];
+module_param_string(quirks, quirks, sizeof(quirks), S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
+
+
+/*
+ * The entries in this table correspond, line for line,
+ * with the entries in usb_storage_usb_ids[], defined in usual-tables.c.
+ */
+
+/*
+ *The vendor name should be kept at eight characters or less, and
+ * the product name should be kept at 16 characters or less. If a device
+ * has the US_FL_FIX_INQUIRY flag, then the vendor and product names
+ * normally generated by a device through the INQUIRY response will be
+ * taken from this list, and this is the reason for the above size
+ * restriction. However, if the flag is not present, then you
+ * are free to use as many characters as you like.
+ */
+
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+#define COMPLIANT_DEV	UNUSUAL_DEV
+
+#define USUAL_DEV(use_protocol, use_transport) \
+{ \
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+}
+
+#define UNUSUAL_VENDOR_INTF(idVendor, cl, sc, pr, \
+		vendor_name, product_name, use_protocol, use_transport, \
+		init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static const struct us_unusual_dev us_unusual_dev_list[] = {
+#	include "unusual_devs.h"
+	{ }		/* Terminating entry */
+};
+
+static const struct us_unusual_dev for_dynamic_ids =
+		USUAL_DEV(USB_SC_SCSI, USB_PR_BULK);
+
+#undef UNUSUAL_DEV
+#undef COMPLIANT_DEV
+#undef USUAL_DEV
+#undef UNUSUAL_VENDOR_INTF
+
+#ifdef CONFIG_LOCKDEP
+
+static struct lock_class_key us_interface_key[USB_MAXINTERFACES];
+
+static void us_set_lock_class(struct mutex *mutex,
+		struct usb_interface *intf)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usb_host_config *config = udev->actconfig;
+	int i;
+
+	for (i = 0; i < config->desc.bNumInterfaces; i++) {
+		if (config->interface[i] == intf)
+			break;
+	}
+
+	BUG_ON(i == config->desc.bNumInterfaces);
+
+	lockdep_set_class(mutex, &us_interface_key[i]);
+}
+
+#else
+
+static void us_set_lock_class(struct mutex *mutex,
+		struct usb_interface *intf)
+{
+}
+
+#endif
+
+#ifdef CONFIG_PM	/* Minimal support for suspend and resume */
+
+int usb_stor_suspend(struct usb_interface *iface, pm_message_t message)
+{
+	struct us_data *us = usb_get_intfdata(iface);
+
+	/* Wait until no command is running */
+	mutex_lock(&us->dev_mutex);
+
+	if (us->suspend_resume_hook)
+		(us->suspend_resume_hook)(us, US_SUSPEND);
+
+	/*
+	 * When runtime PM is working, we'll set a flag to indicate
+	 * whether we should autoresume when a SCSI request arrives.
+	 */
+
+	mutex_unlock(&us->dev_mutex);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_stor_suspend);
+
+int usb_stor_resume(struct usb_interface *iface)
+{
+	struct us_data *us = usb_get_intfdata(iface);
+
+	mutex_lock(&us->dev_mutex);
+
+	if (us->suspend_resume_hook)
+		(us->suspend_resume_hook)(us, US_RESUME);
+
+	mutex_unlock(&us->dev_mutex);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_stor_resume);
+
+int usb_stor_reset_resume(struct usb_interface *iface)
+{
+	struct us_data *us = usb_get_intfdata(iface);
+
+	/* Report the reset to the SCSI core */
+	usb_stor_report_bus_reset(us);
+
+	/*
+	 * If any of the subdrivers implemented a reinitialization scheme,
+	 * this is where the callback would be invoked.
+	 */
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_stor_reset_resume);
+
+#endif /* CONFIG_PM */
+
+/*
+ * The next two routines get called just before and just after
+ * a USB port reset, whether from this driver or a different one.
+ */
+
+int usb_stor_pre_reset(struct usb_interface *iface)
+{
+	struct us_data *us = usb_get_intfdata(iface);
+
+	/* Make sure no command runs during the reset */
+	mutex_lock(&us->dev_mutex);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_stor_pre_reset);
+
+int usb_stor_post_reset(struct usb_interface *iface)
+{
+	struct us_data *us = usb_get_intfdata(iface);
+
+	/* Report the reset to the SCSI core */
+	usb_stor_report_bus_reset(us);
+
+	/*
+	 * If any of the subdrivers implemented a reinitialization scheme,
+	 * this is where the callback would be invoked.
+	 */
+
+	mutex_unlock(&us->dev_mutex);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_stor_post_reset);
+
+/*
+ * fill_inquiry_response takes an unsigned char array (which must
+ * be at least 36 characters) and populates the vendor name,
+ * product name, and revision fields. Then the array is copied
+ * into the SCSI command's response buffer (oddly enough
+ * called request_buffer). data_len contains the length of the
+ * data array, which again must be at least 36.
+ */
+
+void fill_inquiry_response(struct us_data *us, unsigned char *data,
+		unsigned int data_len)
+{
+	if (data_len < 36) /* You lose. */
+		return;
+
+	memset(data+8, ' ', 28);
+	if (data[0]&0x20) { /*
+			     * USB device currently not connected. Return
+			     * peripheral qualifier 001b ("...however, the
+			     * physical device is not currently connected
+			     * to this logical unit") and leave vendor and
+			     * product identification empty. ("If the target
+			     * does store some of the INQUIRY data on the
+			     * device, it may return zeros or ASCII spaces
+			     * (20h) in those fields until the data is
+			     * available from the device.").
+			     */
+	} else {
+		u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice);
+		int n;
+
+		n = strlen(us->unusual_dev->vendorName);
+		memcpy(data+8, us->unusual_dev->vendorName, min(8, n));
+		n = strlen(us->unusual_dev->productName);
+		memcpy(data+16, us->unusual_dev->productName, min(16, n));
+
+		data[32] = 0x30 + ((bcdDevice>>12) & 0x0F);
+		data[33] = 0x30 + ((bcdDevice>>8) & 0x0F);
+		data[34] = 0x30 + ((bcdDevice>>4) & 0x0F);
+		data[35] = 0x30 + ((bcdDevice) & 0x0F);
+	}
+
+	usb_stor_set_xfer_buf(data, data_len, us->srb);
+}
+EXPORT_SYMBOL_GPL(fill_inquiry_response);
+
+static int usb_stor_control_thread(void * __us)
+{
+	struct us_data *us = (struct us_data *)__us;
+	struct Scsi_Host *host = us_to_host(us);
+	struct scsi_cmnd *srb;
+
+	for (;;) {
+		usb_stor_dbg(us, "*** thread sleeping\n");
+		if (wait_for_completion_interruptible(&us->cmnd_ready))
+			break;
+
+		usb_stor_dbg(us, "*** thread awakened\n");
+
+		/* lock the device pointers */
+		mutex_lock(&(us->dev_mutex));
+
+		/* lock access to the state */
+		scsi_lock(host);
+
+		/* When we are called with no command pending, we're done */
+		srb = us->srb;
+		if (srb == NULL) {
+			scsi_unlock(host);
+			mutex_unlock(&us->dev_mutex);
+			usb_stor_dbg(us, "-- exiting\n");
+			break;
+		}
+
+		/* has the command timed out *already* ? */
+		if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
+			srb->result = DID_ABORT << 16;
+			goto SkipForAbort;
+		}
+
+		scsi_unlock(host);
+
+		/*
+		 * reject the command if the direction indicator
+		 * is UNKNOWN
+		 */
+		if (srb->sc_data_direction == DMA_BIDIRECTIONAL) {
+			usb_stor_dbg(us, "UNKNOWN data direction\n");
+			srb->result = DID_ERROR << 16;
+		}
+
+		/*
+		 * reject if target != 0 or if LUN is higher than
+		 * the maximum known LUN
+		 */
+		else if (srb->device->id &&
+				!(us->fflags & US_FL_SCM_MULT_TARG)) {
+			usb_stor_dbg(us, "Bad target number (%d:%llu)\n",
+				     srb->device->id,
+				     srb->device->lun);
+			srb->result = DID_BAD_TARGET << 16;
+		}
+
+		else if (srb->device->lun > us->max_lun) {
+			usb_stor_dbg(us, "Bad LUN (%d:%llu)\n",
+				     srb->device->id,
+				     srb->device->lun);
+			srb->result = DID_BAD_TARGET << 16;
+		}
+
+		/*
+		 * Handle those devices which need us to fake
+		 * their inquiry data
+		 */
+		else if ((srb->cmnd[0] == INQUIRY) &&
+			    (us->fflags & US_FL_FIX_INQUIRY)) {
+			unsigned char data_ptr[36] = {
+			    0x00, 0x80, 0x02, 0x02,
+			    0x1F, 0x00, 0x00, 0x00};
+
+			usb_stor_dbg(us, "Faking INQUIRY command\n");
+			fill_inquiry_response(us, data_ptr, 36);
+			srb->result = SAM_STAT_GOOD;
+		}
+
+		/* we've got a command, let's do it! */
+		else {
+			US_DEBUG(usb_stor_show_command(us, srb));
+			us->proto_handler(srb, us);
+			usb_mark_last_busy(us->pusb_dev);
+		}
+
+		/* lock access to the state */
+		scsi_lock(host);
+
+		/* was the command aborted? */
+		if (srb->result == DID_ABORT << 16) {
+SkipForAbort:
+			usb_stor_dbg(us, "scsi command aborted\n");
+			srb = NULL;	/* Don't call scsi_done() */
+		}
+
+		/*
+		 * If an abort request was received we need to signal that
+		 * the abort has finished.  The proper test for this is
+		 * the TIMED_OUT flag, not srb->result == DID_ABORT, because
+		 * the timeout might have occurred after the command had
+		 * already completed with a different result code.
+		 */
+		if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
+			complete(&(us->notify));
+
+			/* Allow USB transfers to resume */
+			clear_bit(US_FLIDX_ABORTING, &us->dflags);
+			clear_bit(US_FLIDX_TIMED_OUT, &us->dflags);
+		}
+
+		/* finished working on this command */
+		us->srb = NULL;
+		scsi_unlock(host);
+
+		/* unlock the device pointers */
+		mutex_unlock(&us->dev_mutex);
+
+		/* now that the locks are released, notify the SCSI core */
+		if (srb) {
+			usb_stor_dbg(us, "scsi cmd done, result=0x%x\n",
+					srb->result);
+			scsi_done_direct(srb);
+		}
+	} /* for (;;) */
+
+	/* Wait until we are told to stop */
+	for (;;) {
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (kthread_should_stop())
+			break;
+		schedule();
+	}
+	__set_current_state(TASK_RUNNING);
+	return 0;
+}
+
+/***********************************************************************
+ * Device probing and disconnecting
+ ***********************************************************************/
+
+/* Associate our private data with the USB device */
+static int associate_dev(struct us_data *us, struct usb_interface *intf)
+{
+	/* Fill in the device-related fields */
+	us->pusb_dev = interface_to_usbdev(intf);
+	us->pusb_intf = intf;
+	us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+	usb_stor_dbg(us, "Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n",
+		     le16_to_cpu(us->pusb_dev->descriptor.idVendor),
+		     le16_to_cpu(us->pusb_dev->descriptor.idProduct),
+		     le16_to_cpu(us->pusb_dev->descriptor.bcdDevice));
+	usb_stor_dbg(us, "Interface Subclass: 0x%02x, Protocol: 0x%02x\n",
+		     intf->cur_altsetting->desc.bInterfaceSubClass,
+		     intf->cur_altsetting->desc.bInterfaceProtocol);
+
+	/* Store our private data in the interface */
+	usb_set_intfdata(intf, us);
+
+	/* Allocate the control/setup and DMA-mapped buffers */
+	us->cr = kmalloc(sizeof(*us->cr), GFP_KERNEL);
+	if (!us->cr)
+		return -ENOMEM;
+
+	us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE,
+			GFP_KERNEL, &us->iobuf_dma);
+	if (!us->iobuf) {
+		usb_stor_dbg(us, "I/O buffer allocation failed\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+/* Works only for digits and letters, but small and fast */
+#define TOLOWER(x) ((x) | 0x20)
+
+/* Adjust device flags based on the "quirks=" module parameter */
+void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
+{
+	char *p;
+	u16 vid = le16_to_cpu(udev->descriptor.idVendor);
+	u16 pid = le16_to_cpu(udev->descriptor.idProduct);
+	unsigned f = 0;
+	unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE |
+			US_FL_FIX_CAPACITY | US_FL_IGNORE_UAS |
+			US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
+			US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
+			US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
+			US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
+			US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
+			US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE |
+			US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES |
+			US_FL_MAX_SECTORS_240 | US_FL_NO_REPORT_LUNS |
+			US_FL_ALWAYS_SYNC);
+
+	p = quirks;
+	while (*p) {
+		/* Each entry consists of VID:PID:flags */
+		if (vid == simple_strtoul(p, &p, 16) &&
+				*p == ':' &&
+				pid == simple_strtoul(p+1, &p, 16) &&
+				*p == ':')
+			break;
+
+		/* Move forward to the next entry */
+		while (*p) {
+			if (*p++ == ',')
+				break;
+		}
+	}
+	if (!*p)	/* No match */
+		return;
+
+	/* Collect the flags */
+	while (*++p && *p != ',') {
+		switch (TOLOWER(*p)) {
+		case 'a':
+			f |= US_FL_SANE_SENSE;
+			break;
+		case 'b':
+			f |= US_FL_BAD_SENSE;
+			break;
+		case 'c':
+			f |= US_FL_FIX_CAPACITY;
+			break;
+		case 'd':
+			f |= US_FL_NO_READ_DISC_INFO;
+			break;
+		case 'e':
+			f |= US_FL_NO_READ_CAPACITY_16;
+			break;
+		case 'f':
+			f |= US_FL_NO_REPORT_OPCODES;
+			break;
+		case 'g':
+			f |= US_FL_MAX_SECTORS_240;
+			break;
+		case 'h':
+			f |= US_FL_CAPACITY_HEURISTICS;
+			break;
+		case 'i':
+			f |= US_FL_IGNORE_DEVICE;
+			break;
+		case 'j':
+			f |= US_FL_NO_REPORT_LUNS;
+			break;
+		case 'k':
+			f |= US_FL_NO_SAME;
+			break;
+		case 'l':
+			f |= US_FL_NOT_LOCKABLE;
+			break;
+		case 'm':
+			f |= US_FL_MAX_SECTORS_64;
+			break;
+		case 'n':
+			f |= US_FL_INITIAL_READ10;
+			break;
+		case 'o':
+			f |= US_FL_CAPACITY_OK;
+			break;
+		case 'p':
+			f |= US_FL_WRITE_CACHE;
+			break;
+		case 'r':
+			f |= US_FL_IGNORE_RESIDUE;
+			break;
+		case 's':
+			f |= US_FL_SINGLE_LUN;
+			break;
+		case 't':
+			f |= US_FL_NO_ATA_1X;
+			break;
+		case 'u':
+			f |= US_FL_IGNORE_UAS;
+			break;
+		case 'w':
+			f |= US_FL_NO_WP_DETECT;
+			break;
+		case 'y':
+			f |= US_FL_ALWAYS_SYNC;
+			break;
+		/* Ignore unrecognized flag characters */
+		}
+	}
+	*fflags = (*fflags & ~mask) | f;
+}
+EXPORT_SYMBOL_GPL(usb_stor_adjust_quirks);
+
+/* Get the unusual_devs entries and the string descriptors */
+static int get_device_info(struct us_data *us, const struct usb_device_id *id,
+		const struct us_unusual_dev *unusual_dev)
+{
+	struct usb_device *dev = us->pusb_dev;
+	struct usb_interface_descriptor *idesc =
+		&us->pusb_intf->cur_altsetting->desc;
+	struct device *pdev = &us->pusb_intf->dev;
+
+	/* Store the entries */
+	us->unusual_dev = unusual_dev;
+	us->subclass = (unusual_dev->useProtocol == USB_SC_DEVICE) ?
+			idesc->bInterfaceSubClass :
+			unusual_dev->useProtocol;
+	us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ?
+			idesc->bInterfaceProtocol :
+			unusual_dev->useTransport;
+	us->fflags = id->driver_info;
+	usb_stor_adjust_quirks(us->pusb_dev, &us->fflags);
+
+	if (us->fflags & US_FL_IGNORE_DEVICE) {
+		dev_info(pdev, "device ignored\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * This flag is only needed when we're in high-speed, so let's
+	 * disable it if we're in full-speed
+	 */
+	if (dev->speed != USB_SPEED_HIGH)
+		us->fflags &= ~US_FL_GO_SLOW;
+
+	if (us->fflags)
+		dev_info(pdev, "Quirks match for vid %04x pid %04x: %lx\n",
+				le16_to_cpu(dev->descriptor.idVendor),
+				le16_to_cpu(dev->descriptor.idProduct),
+				us->fflags);
+
+	/*
+	 * Log a message if a non-generic unusual_dev entry contains an
+	 * unnecessary subclass or protocol override.  This may stimulate
+	 * reports from users that will help us remove unneeded entries
+	 * from the unusual_devs.h table.
+	 */
+	if (id->idVendor || id->idProduct) {
+		static const char *msgs[3] = {
+			"an unneeded SubClass entry",
+			"an unneeded Protocol entry",
+			"unneeded SubClass and Protocol entries"};
+		struct usb_device_descriptor *ddesc = &dev->descriptor;
+		int msg = -1;
+
+		if (unusual_dev->useProtocol != USB_SC_DEVICE &&
+			us->subclass == idesc->bInterfaceSubClass)
+			msg += 1;
+		if (unusual_dev->useTransport != USB_PR_DEVICE &&
+			us->protocol == idesc->bInterfaceProtocol)
+			msg += 2;
+		if (msg >= 0 && !(us->fflags & US_FL_NEED_OVERRIDE))
+			dev_notice(pdev, "This device "
+					"(%04x,%04x,%04x S %02x P %02x)"
+					" has %s in unusual_devs.h (kernel"
+					" %s)\n"
+					"   Please send a copy of this message to "
+					"<linux-usb@vger.kernel.org> and "
+					"<usb-storage@lists.one-eyed-alien.net>\n",
+					le16_to_cpu(ddesc->idVendor),
+					le16_to_cpu(ddesc->idProduct),
+					le16_to_cpu(ddesc->bcdDevice),
+					idesc->bInterfaceSubClass,
+					idesc->bInterfaceProtocol,
+					msgs[msg],
+					utsname()->release);
+	}
+
+	return 0;
+}
+
+/* Get the transport settings */
+static void get_transport(struct us_data *us)
+{
+	switch (us->protocol) {
+	case USB_PR_CB:
+		us->transport_name = "Control/Bulk";
+		us->transport = usb_stor_CB_transport;
+		us->transport_reset = usb_stor_CB_reset;
+		us->max_lun = 7;
+		break;
+
+	case USB_PR_CBI:
+		us->transport_name = "Control/Bulk/Interrupt";
+		us->transport = usb_stor_CB_transport;
+		us->transport_reset = usb_stor_CB_reset;
+		us->max_lun = 7;
+		break;
+
+	case USB_PR_BULK:
+		us->transport_name = "Bulk";
+		us->transport = usb_stor_Bulk_transport;
+		us->transport_reset = usb_stor_Bulk_reset;
+		break;
+	}
+}
+
+/* Get the protocol settings */
+static void get_protocol(struct us_data *us)
+{
+	switch (us->subclass) {
+	case USB_SC_RBC:
+		us->protocol_name = "Reduced Block Commands (RBC)";
+		us->proto_handler = usb_stor_transparent_scsi_command;
+		break;
+
+	case USB_SC_8020:
+		us->protocol_name = "8020i";
+		us->proto_handler = usb_stor_pad12_command;
+		us->max_lun = 0;
+		break;
+
+	case USB_SC_QIC:
+		us->protocol_name = "QIC-157";
+		us->proto_handler = usb_stor_pad12_command;
+		us->max_lun = 0;
+		break;
+
+	case USB_SC_8070:
+		us->protocol_name = "8070i";
+		us->proto_handler = usb_stor_pad12_command;
+		us->max_lun = 0;
+		break;
+
+	case USB_SC_SCSI:
+		us->protocol_name = "Transparent SCSI";
+		us->proto_handler = usb_stor_transparent_scsi_command;
+		break;
+
+	case USB_SC_UFI:
+		us->protocol_name = "Uniform Floppy Interface (UFI)";
+		us->proto_handler = usb_stor_ufi_command;
+		break;
+	}
+}
+
+/* Get the pipe settings */
+static int get_pipes(struct us_data *us)
+{
+	struct usb_host_interface *alt = us->pusb_intf->cur_altsetting;
+	struct usb_endpoint_descriptor *ep_in;
+	struct usb_endpoint_descriptor *ep_out;
+	struct usb_endpoint_descriptor *ep_int;
+	int res;
+
+	/*
+	 * Find the first endpoint of each type we need.
+	 * We are expecting a minimum of 2 endpoints - in and out (bulk).
+	 * An optional interrupt-in is OK (necessary for CBI protocol).
+	 * We will ignore any others.
+	 */
+	res = usb_find_common_endpoints(alt, &ep_in, &ep_out, NULL, NULL);
+	if (res) {
+		usb_stor_dbg(us, "bulk endpoints not found\n");
+		return res;
+	}
+
+	res = usb_find_int_in_endpoint(alt, &ep_int);
+	if (res && us->protocol == USB_PR_CBI) {
+		usb_stor_dbg(us, "interrupt endpoint not found\n");
+		return res;
+	}
+
+	/* Calculate and store the pipe values */
+	us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
+	us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
+	us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
+		usb_endpoint_num(ep_out));
+	us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev,
+		usb_endpoint_num(ep_in));
+	if (ep_int) {
+		us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
+			usb_endpoint_num(ep_int));
+		us->ep_bInterval = ep_int->bInterval;
+	}
+	return 0;
+}
+
+/* Initialize all the dynamic resources we need */
+static int usb_stor_acquire_resources(struct us_data *us)
+{
+	int p;
+	struct task_struct *th;
+
+	us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!us->current_urb)
+		return -ENOMEM;
+
+	/*
+	 * Just before we start our control thread, initialize
+	 * the device if it needs initialization
+	 */
+	if (us->unusual_dev->initFunction) {
+		p = us->unusual_dev->initFunction(us);
+		if (p)
+			return p;
+	}
+
+	/* Start up our control thread */
+	th = kthread_run(usb_stor_control_thread, us, "usb-storage");
+	if (IS_ERR(th)) {
+		dev_warn(&us->pusb_intf->dev,
+				"Unable to start control thread\n");
+		return PTR_ERR(th);
+	}
+	us->ctl_thread = th;
+
+	return 0;
+}
+
+/* Release all our dynamic resources */
+static void usb_stor_release_resources(struct us_data *us)
+{
+	/*
+	 * Tell the control thread to exit.  The SCSI host must
+	 * already have been removed and the DISCONNECTING flag set
+	 * so that we won't accept any more commands.
+	 */
+	usb_stor_dbg(us, "-- sending exit command to thread\n");
+	complete(&us->cmnd_ready);
+	if (us->ctl_thread)
+		kthread_stop(us->ctl_thread);
+
+	/* Call the destructor routine, if it exists */
+	if (us->extra_destructor) {
+		usb_stor_dbg(us, "-- calling extra_destructor()\n");
+		us->extra_destructor(us->extra);
+	}
+
+	/* Free the extra data and the URB */
+	kfree(us->extra);
+	usb_free_urb(us->current_urb);
+}
+
+/* Dissociate from the USB device */
+static void dissociate_dev(struct us_data *us)
+{
+	/* Free the buffers */
+	kfree(us->cr);
+	usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, us->iobuf_dma);
+
+	/* Remove our private data from the interface */
+	usb_set_intfdata(us->pusb_intf, NULL);
+}
+
+/*
+ * First stage of disconnect processing: stop SCSI scanning,
+ * remove the host, and stop accepting new commands
+ */
+static void quiesce_and_remove_host(struct us_data *us)
+{
+	struct Scsi_Host *host = us_to_host(us);
+
+	/* If the device is really gone, cut short reset delays */
+	if (us->pusb_dev->state == USB_STATE_NOTATTACHED) {
+		set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
+		wake_up(&us->delay_wait);
+	}
+
+	/*
+	 * Prevent SCSI scanning (if it hasn't started yet)
+	 * or wait for the SCSI-scanning routine to stop.
+	 */
+	cancel_delayed_work_sync(&us->scan_dwork);
+
+	/* Balance autopm calls if scanning was cancelled */
+	if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
+		usb_autopm_put_interface_no_suspend(us->pusb_intf);
+
+	/*
+	 * Removing the host will perform an orderly shutdown: caches
+	 * synchronized, disks spun down, etc.
+	 */
+	scsi_remove_host(host);
+
+	/*
+	 * Prevent any new commands from being accepted and cut short
+	 * reset delays.
+	 */
+	scsi_lock(host);
+	set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
+	scsi_unlock(host);
+	wake_up(&us->delay_wait);
+}
+
+/* Second stage of disconnect processing: deallocate all resources */
+static void release_everything(struct us_data *us)
+{
+	usb_stor_release_resources(us);
+	dissociate_dev(us);
+
+	/*
+	 * Drop our reference to the host; the SCSI core will free it
+	 * (and "us" along with it) when the refcount becomes 0.
+	 */
+	scsi_host_put(us_to_host(us));
+}
+
+/* Delayed-work routine to carry out SCSI-device scanning */
+static void usb_stor_scan_dwork(struct work_struct *work)
+{
+	struct us_data *us = container_of(work, struct us_data,
+			scan_dwork.work);
+	struct device *dev = &us->pusb_intf->dev;
+
+	dev_dbg(dev, "starting scan\n");
+
+	/* For bulk-only devices, determine the max LUN value */
+	if (us->protocol == USB_PR_BULK &&
+	    !(us->fflags & US_FL_SINGLE_LUN) &&
+	    !(us->fflags & US_FL_SCM_MULT_TARG)) {
+		mutex_lock(&us->dev_mutex);
+		us->max_lun = usb_stor_Bulk_max_lun(us);
+		/*
+		 * Allow proper scanning of devices that present more than 8 LUNs
+		 * While not affecting other devices that may need the previous
+		 * behavior
+		 */
+		if (us->max_lun >= 8)
+			us_to_host(us)->max_lun = us->max_lun+1;
+		mutex_unlock(&us->dev_mutex);
+	}
+	scsi_scan_host(us_to_host(us));
+	dev_dbg(dev, "scan complete\n");
+
+	/* Should we unbind if no devices were detected? */
+
+	usb_autopm_put_interface(us->pusb_intf);
+	clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
+}
+
+static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
+{
+	struct usb_device *usb_dev = interface_to_usbdev(intf);
+
+	if (usb_dev->bus->sg_tablesize) {
+		return usb_dev->bus->sg_tablesize;
+	}
+	return SG_ALL;
+}
+
+/* First part of general USB mass-storage probing */
+int usb_stor_probe1(struct us_data **pus,
+		struct usb_interface *intf,
+		const struct usb_device_id *id,
+		const struct us_unusual_dev *unusual_dev,
+		struct scsi_host_template *sht)
+{
+	struct Scsi_Host *host;
+	struct us_data *us;
+	int result;
+
+	dev_info(&intf->dev, "USB Mass Storage device detected\n");
+
+	/*
+	 * Ask the SCSI layer to allocate a host structure, with extra
+	 * space at the end for our private us_data structure.
+	 */
+	host = scsi_host_alloc(sht, sizeof(*us));
+	if (!host) {
+		dev_warn(&intf->dev, "Unable to allocate the scsi host\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * Allow 16-byte CDBs and thus > 2TB
+	 */
+	host->max_cmd_len = 16;
+	host->sg_tablesize = usb_stor_sg_tablesize(intf);
+	*pus = us = host_to_us(host);
+	mutex_init(&(us->dev_mutex));
+	us_set_lock_class(&us->dev_mutex, intf);
+	init_completion(&us->cmnd_ready);
+	init_completion(&(us->notify));
+	init_waitqueue_head(&us->delay_wait);
+	INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork);
+
+	/* Associate the us_data structure with the USB device */
+	result = associate_dev(us, intf);
+	if (result)
+		goto BadDevice;
+
+	/* Get the unusual_devs entries and the descriptors */
+	result = get_device_info(us, id, unusual_dev);
+	if (result)
+		goto BadDevice;
+
+	/* Get standard transport and protocol settings */
+	get_transport(us);
+	get_protocol(us);
+
+	/*
+	 * Give the caller a chance to fill in specialized transport
+	 * or protocol settings.
+	 */
+	return 0;
+
+BadDevice:
+	usb_stor_dbg(us, "storage_probe() failed\n");
+	release_everything(us);
+	return result;
+}
+EXPORT_SYMBOL_GPL(usb_stor_probe1);
+
+/* Second part of general USB mass-storage probing */
+int usb_stor_probe2(struct us_data *us)
+{
+	int result;
+	struct device *dev = &us->pusb_intf->dev;
+
+	/* Make sure the transport and protocol have both been set */
+	if (!us->transport || !us->proto_handler) {
+		result = -ENXIO;
+		goto BadDevice;
+	}
+	usb_stor_dbg(us, "Transport: %s\n", us->transport_name);
+	usb_stor_dbg(us, "Protocol: %s\n", us->protocol_name);
+
+	if (us->fflags & US_FL_SCM_MULT_TARG) {
+		/*
+		 * SCM eUSCSI bridge devices can have different numbers
+		 * of LUNs on different targets; allow all to be probed.
+		 */
+		us->max_lun = 7;
+		/* The eUSCSI itself has ID 7, so avoid scanning that */
+		us_to_host(us)->this_id = 7;
+		/* max_id is 8 initially, so no need to set it here */
+	} else {
+		/* In the normal case there is only a single target */
+		us_to_host(us)->max_id = 1;
+		/*
+		 * Like Windows, we won't store the LUN bits in CDB[1] for
+		 * SCSI-2 devices using the Bulk-Only transport (even though
+		 * this violates the SCSI spec).
+		 */
+		if (us->transport == usb_stor_Bulk_transport)
+			us_to_host(us)->no_scsi2_lun_in_cdb = 1;
+	}
+
+	/* fix for single-lun devices */
+	if (us->fflags & US_FL_SINGLE_LUN)
+		us->max_lun = 0;
+
+	/* Find the endpoints and calculate pipe values */
+	result = get_pipes(us);
+	if (result)
+		goto BadDevice;
+
+	/*
+	 * If the device returns invalid data for the first READ(10)
+	 * command, indicate the command should be retried.
+	 */
+	if (us->fflags & US_FL_INITIAL_READ10)
+		set_bit(US_FLIDX_REDO_READ10, &us->dflags);
+
+	/* Acquire all the other resources and add the host */
+	result = usb_stor_acquire_resources(us);
+	if (result)
+		goto BadDevice;
+	usb_autopm_get_interface_no_resume(us->pusb_intf);
+	snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s",
+					dev_name(&us->pusb_intf->dev));
+	result = scsi_add_host(us_to_host(us), dev);
+	if (result) {
+		dev_warn(dev,
+				"Unable to add the scsi host\n");
+		goto HostAddErr;
+	}
+
+	/* Submit the delayed_work for SCSI-device scanning */
+	set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
+
+	if (delay_use > 0)
+		dev_dbg(dev, "waiting for device to settle before scanning\n");
+	queue_delayed_work(system_freezable_wq, &us->scan_dwork,
+			delay_use * HZ);
+	return 0;
+
+	/* We come here if there are any problems */
+HostAddErr:
+	usb_autopm_put_interface_no_suspend(us->pusb_intf);
+BadDevice:
+	usb_stor_dbg(us, "storage_probe() failed\n");
+	release_everything(us);
+	return result;
+}
+EXPORT_SYMBOL_GPL(usb_stor_probe2);
+
+/* Handle a USB mass-storage disconnect */
+void usb_stor_disconnect(struct usb_interface *intf)
+{
+	struct us_data *us = usb_get_intfdata(intf);
+
+	quiesce_and_remove_host(us);
+	release_everything(us);
+}
+EXPORT_SYMBOL_GPL(usb_stor_disconnect);
+
+static struct scsi_host_template usb_stor_host_template;
+
+/* The main probe routine for standard devices */
+static int storage_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	const struct us_unusual_dev *unusual_dev;
+	struct us_data *us;
+	int result;
+	int size;
+
+	/* If uas is enabled and this device can do uas then ignore it. */
+#if IS_ENABLED(CONFIG_USB_UAS)
+	if (uas_use_uas_driver(intf, id, NULL))
+		return -ENXIO;
+#endif
+
+	/*
+	 * If the device isn't standard (is handled by a subdriver
+	 * module) then don't accept it.
+	 */
+	if (usb_usual_ignore_device(intf))
+		return -ENXIO;
+
+	/*
+	 * Call the general probe procedures.
+	 *
+	 * The unusual_dev_list array is parallel to the usb_storage_usb_ids
+	 * table, so we use the index of the id entry to find the
+	 * corresponding unusual_devs entry.
+	 */
+
+	size = ARRAY_SIZE(us_unusual_dev_list);
+	if (id >= usb_storage_usb_ids && id < usb_storage_usb_ids + size) {
+		unusual_dev = (id - usb_storage_usb_ids) + us_unusual_dev_list;
+	} else {
+		unusual_dev = &for_dynamic_ids;
+
+		dev_dbg(&intf->dev, "Use Bulk-Only transport with the Transparent SCSI protocol for dynamic id: 0x%04x 0x%04x\n",
+			id->idVendor, id->idProduct);
+	}
+
+	result = usb_stor_probe1(&us, intf, id, unusual_dev,
+				 &usb_stor_host_template);
+	if (result)
+		return result;
+
+	/* No special transport or protocol settings in the main module */
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver usb_storage_driver = {
+	.name =		DRV_NAME,
+	.probe =	storage_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	usb_storage_usb_ids,
+	.supports_autosuspend = 1,
+	.soft_unbind =	1,
+};
+
+module_usb_stor_driver(usb_storage_driver, usb_stor_host_template, DRV_NAME);
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
new file mode 100644
index 000000000..0451fac1a
--- /dev/null
+++ b/drivers/usb/storage/usb.h
@@ -0,0 +1,210 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Driver for USB Mass Storage compliant devices
+ * Main Header File
+ *
+ * Current development and maintenance by:
+ *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Initial work by:
+ *   (c) 1999 Michael Gee (michael@linuxspecific.com)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices.  Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document.  The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ */
+
+#ifndef _USB_H_
+#define _USB_H_
+
+#include <linux/usb.h>
+#include <linux/usb_usual.h>
+#include <linux/blkdev.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <scsi/scsi_host.h>
+
+struct us_data;
+struct scsi_cmnd;
+
+/*
+ * Unusual device list definitions 
+ */
+
+struct us_unusual_dev {
+	const char* vendorName;
+	const char* productName;
+	__u8  useProtocol;
+	__u8  useTransport;
+	int (*initFunction)(struct us_data *);
+};
+
+
+/* Dynamic bitflag definitions (us->dflags): used in set_bit() etc. */
+#define US_FLIDX_URB_ACTIVE	0	/* current_urb is in use    */
+#define US_FLIDX_SG_ACTIVE	1	/* current_sg is in use     */
+#define US_FLIDX_ABORTING	2	/* abort is in progress     */
+#define US_FLIDX_DISCONNECTING	3	/* disconnect in progress   */
+#define US_FLIDX_RESETTING	4	/* device reset in progress */
+#define US_FLIDX_TIMED_OUT	5	/* SCSI midlayer timed out  */
+#define US_FLIDX_SCAN_PENDING	6	/* scanning not yet done    */
+#define US_FLIDX_REDO_READ10	7	/* redo READ(10) command    */
+#define US_FLIDX_READ10_WORKED	8	/* previous READ(10) succeeded */
+
+#define USB_STOR_STRING_LEN 32
+
+/*
+ * We provide a DMA-mapped I/O buffer for use with small USB transfers.
+ * It turns out that CB[I] needs a 12-byte buffer and Bulk-only needs a
+ * 31-byte buffer.  But Freecom needs a 64-byte buffer, so that's the
+ * size we'll allocate.
+ */
+
+#define US_IOBUF_SIZE		64	/* Size of the DMA-mapped I/O buffer */
+#define US_SENSE_SIZE		18	/* Size of the autosense data buffer */
+
+typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*);
+typedef int (*trans_reset)(struct us_data*);
+typedef void (*proto_cmnd)(struct scsi_cmnd*, struct us_data*);
+typedef void (*extra_data_destructor)(void *);	/* extra data destructor */
+typedef void (*pm_hook)(struct us_data *, int);	/* power management hook */
+
+#define US_SUSPEND	0
+#define US_RESUME	1
+
+/* we allocate one of these for every device that we remember */
+struct us_data {
+	/*
+	 * The device we're working with
+	 * It's important to note:
+	 *    (o) you must hold dev_mutex to change pusb_dev
+	 */
+	struct mutex		dev_mutex;	 /* protect pusb_dev */
+	struct usb_device	*pusb_dev;	 /* this usb_device */
+	struct usb_interface	*pusb_intf;	 /* this interface */
+	const struct us_unusual_dev   *unusual_dev;
+						/* device-filter entry     */
+	unsigned long		fflags;		 /* fixed flags from filter */
+	unsigned long		dflags;		 /* dynamic atomic bitflags */
+	unsigned int		send_bulk_pipe;	 /* cached pipe values */
+	unsigned int		recv_bulk_pipe;
+	unsigned int		send_ctrl_pipe;
+	unsigned int		recv_ctrl_pipe;
+	unsigned int		recv_intr_pipe;
+
+	/* information about the device */
+	char			*transport_name;
+	char			*protocol_name;
+	__le32			bcs_signature;
+	u8			subclass;
+	u8			protocol;
+	u8			max_lun;
+
+	u8			ifnum;		 /* interface number   */
+	u8			ep_bInterval;	 /* interrupt interval */
+
+	/* function pointers for this device */
+	trans_cmnd		transport;	 /* transport function	   */
+	trans_reset		transport_reset; /* transport device reset */
+	proto_cmnd		proto_handler;	 /* protocol handler	   */
+
+	/* SCSI interfaces */
+	struct scsi_cmnd	*srb;		 /* current srb		*/
+	unsigned int		tag;		 /* current dCBWTag	*/
+	char			scsi_name[32];	 /* scsi_host name	*/
+
+	/* control and bulk communications data */
+	struct urb		*current_urb;	 /* USB requests	 */
+	struct usb_ctrlrequest	*cr;		 /* control requests	 */
+	struct usb_sg_request	current_sg;	 /* scatter-gather req.  */
+	unsigned char		*iobuf;		 /* I/O buffer		 */
+	dma_addr_t		iobuf_dma;	 /* buffer DMA addresses */
+	struct task_struct	*ctl_thread;	 /* the control thread   */
+
+	/* mutual exclusion and synchronization structures */
+	struct completion	cmnd_ready;	 /* to sleep thread on	    */
+	struct completion	notify;		 /* thread begin/end	    */
+	wait_queue_head_t	delay_wait;	 /* wait during reset	    */
+	struct delayed_work	scan_dwork;	 /* for async scanning      */
+
+	/* subdriver information */
+	void			*extra;		 /* Any extra data          */
+	extra_data_destructor	extra_destructor;/* extra data destructor   */
+#ifdef CONFIG_PM
+	pm_hook			suspend_resume_hook;
+#endif
+
+	/* hacks for READ CAPACITY bug handling */
+	int			use_last_sector_hacks;
+	int			last_sector_retries;
+};
+
+/* Convert between us_data and the corresponding Scsi_Host */
+static inline struct Scsi_Host *us_to_host(struct us_data *us) {
+	return container_of((void *) us, struct Scsi_Host, hostdata);
+}
+static inline struct us_data *host_to_us(struct Scsi_Host *host) {
+	return (struct us_data *) host->hostdata;
+}
+
+/* Function to fill an inquiry response. See usb.c for details */
+extern void fill_inquiry_response(struct us_data *us,
+	unsigned char *data, unsigned int data_len);
+
+/*
+ * The scsi_lock() and scsi_unlock() macros protect the sm_state and the
+ * single queue element srb for write access
+ */
+#define scsi_unlock(host)	spin_unlock_irq(host->host_lock)
+#define scsi_lock(host)		spin_lock_irq(host->host_lock)
+
+/* General routines provided by the usb-storage standard core */
+#ifdef CONFIG_PM
+extern int usb_stor_suspend(struct usb_interface *iface, pm_message_t message);
+extern int usb_stor_resume(struct usb_interface *iface);
+extern int usb_stor_reset_resume(struct usb_interface *iface);
+#else
+#define usb_stor_suspend	NULL
+#define usb_stor_resume		NULL
+#define usb_stor_reset_resume	NULL
+#endif
+
+extern int usb_stor_pre_reset(struct usb_interface *iface);
+extern int usb_stor_post_reset(struct usb_interface *iface);
+
+extern int usb_stor_probe1(struct us_data **pus,
+		struct usb_interface *intf,
+		const struct usb_device_id *id,
+		const struct us_unusual_dev *unusual_dev,
+		struct scsi_host_template *sht);
+extern int usb_stor_probe2(struct us_data *us);
+extern void usb_stor_disconnect(struct usb_interface *intf);
+
+extern void usb_stor_adjust_quirks(struct usb_device *dev,
+		unsigned long *fflags);
+
+#define module_usb_stor_driver(__driver, __sht, __name) \
+static int __init __driver##_init(void) \
+{ \
+	usb_stor_host_template_init(&(__sht), __name, THIS_MODULE); \
+	return usb_register(&(__driver)); \
+} \
+module_init(__driver##_init); \
+static void __exit __driver##_exit(void) \
+{ \
+	usb_deregister(&(__driver)); \
+} \
+module_exit(__driver##_exit)
+
+#endif
diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c
new file mode 100644
index 000000000..529512827
--- /dev/null
+++ b/drivers/usb/storage/usual-tables.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for USB Mass Storage devices
+ * Usual Tables File for usb-storage and libusual
+ *
+ * Copyright (C) 2009 Alan Stern (stern@rowland.harvard.edu)
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb_usual.h>
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+#define COMPLIANT_DEV	UNUSUAL_DEV
+
+#define USUAL_DEV(useProto, useTrans) \
+{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans) }
+
+/* Define the device is matched with Vendor ID and interface descriptors */
+#define UNUSUAL_VENDOR_INTF(id_vendor, cl, sc, pr, \
+			vendorName, productName, useProtocol, useTransport, \
+			initFunction, flags) \
+{ \
+	.match_flags = USB_DEVICE_ID_MATCH_INT_INFO \
+				| USB_DEVICE_ID_MATCH_VENDOR, \
+	.idVendor    = (id_vendor), \
+	.bInterfaceClass = (cl), \
+	.bInterfaceSubClass = (sc), \
+	.bInterfaceProtocol = (pr), \
+	.driver_info = (flags) \
+}
+
+const struct usb_device_id usb_storage_usb_ids[] = {
+#	include "unusual_devs.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, usb_storage_usb_ids);
+
+#undef UNUSUAL_DEV
+#undef COMPLIANT_DEV
+#undef USUAL_DEV
+#undef UNUSUAL_VENDOR_INTF
+
+/*
+ * The table of devices to ignore
+ */
+struct ignore_entry {
+	u16	vid, pid, bcdmin, bcdmax;
+};
+
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{					\
+	.vid	= id_vendor,		\
+	.pid 	= id_product,		\
+	.bcdmin	= bcdDeviceMin,		\
+	.bcdmax = bcdDeviceMax,		\
+}
+
+static const struct ignore_entry ignore_ids[] = {
+#	include "unusual_alauda.h"
+#	include "unusual_cypress.h"
+#	include "unusual_datafab.h"
+#	include "unusual_ene_ub6250.h"
+#	include "unusual_freecom.h"
+#	include "unusual_isd200.h"
+#	include "unusual_jumpshot.h"
+#	include "unusual_karma.h"
+#	include "unusual_onetouch.h"
+#	include "unusual_realtek.h"
+#	include "unusual_sddr09.h"
+#	include "unusual_sddr55.h"
+#	include "unusual_usbat.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+/* Return an error if a device is in the ignore_ids list */
+int usb_usual_ignore_device(struct usb_interface *intf)
+{
+	struct usb_device *udev;
+	unsigned vid, pid, bcd;
+	const struct ignore_entry *p;
+
+	udev = interface_to_usbdev(intf);
+	vid = le16_to_cpu(udev->descriptor.idVendor);
+	pid = le16_to_cpu(udev->descriptor.idProduct);
+	bcd = le16_to_cpu(udev->descriptor.bcdDevice);
+
+	for (p = ignore_ids; p->vid; ++p) {
+		if (p->vid == vid && p->pid == pid &&
+				p->bcdmin <= bcd && p->bcdmax >= bcd)
+			return -ENXIO;
+	}
+	return 0;
+}
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
new file mode 100644
index 000000000..831e70499
--- /dev/null
+++ b/drivers/usb/typec/Kconfig
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menuconfig TYPEC
+	tristate "USB Type-C Support"
+	help
+	  USB Type-C Specification defines a cable and connector for USB where
+	  only one type of plug is supported on both ends, i.e. there will not
+	  be Type-A plug on one end of the cable and Type-B plug on the other.
+	  Determination of the host-to-device relationship happens through a
+	  specific Configuration Channel (CC) which goes through the USB Type-C
+	  cable. The Configuration Channel may also be used to detect optional
+	  Accessory Modes - Analog Audio and Debug - and if USB Power Delivery
+	  is supported, the Alternate Modes, where the connector is used for
+	  something else then USB communication.
+
+	  USB Power Delivery Specification defines a protocol that can be used
+	  to negotiate the voltage and current levels with the connected
+	  partners. USB Power Delivery allows higher voltages then the normal
+	  5V, up to 20V, and current up to 5A over the cable. The USB Power
+	  Delivery protocol is also used to negotiate the optional Alternate
+	  Modes when they are supported. USB Power Delivery does not depend on
+	  USB Type-C connector, however it is mostly used together with USB
+	  Type-C connectors.
+
+	  USB Type-C and USB Power Delivery Specifications define a set of state
+	  machines that need to be implemented in either software or firmware.
+	  Simple USB Type-C PHYs, for example USB Type-C Port Controller
+	  Interface Specification compliant "Port Controllers" need the state
+	  machines to be handled in the OS, but stand-alone USB Type-C and Power
+	  Delivery controllers handle the state machines inside their firmware.
+	  The USB Type-C and Power Delivery controllers usually function
+	  autonomously, and do not necessarily require drivers.
+
+	  Enable this configurations option if you have USB Type-C connectors on
+	  your system and 1) you know your USB Type-C hardware requires OS
+	  control (a driver) to function, or 2) if you need to be able to read
+	  the status of the USB Type-C ports in your system, or 3) if you need
+	  to be able to swap the power role (decide are you supplying or
+	  consuming power over the cable) or data role (host or device) when
+	  both roles are supported.
+
+	  For more information, see the kernel documentation for USB Type-C
+	  Connector Class API (Documentation/driver-api/usb/typec.rst)
+	  <https://www.kernel.org/doc/html/latest/driver-api/usb/typec.html>
+	  and ABI (Documentation/ABI/testing/sysfs-class-typec).
+
+if TYPEC
+
+source "drivers/usb/typec/tcpm/Kconfig"
+
+source "drivers/usb/typec/ucsi/Kconfig"
+
+source "drivers/usb/typec/tipd/Kconfig"
+
+config TYPEC_ANX7411
+	tristate "Analogix ANX7411 Type-C DRP Port controller driver"
+	depends on I2C
+	depends on USB_ROLE_SWITCH
+	depends on POWER_SUPPLY
+	help
+	  Say Y or M here if your system has Analogix ANX7411 Type-C DRP Port
+	  controller driver.
+
+	  If you choose to build this driver as a dynamically linked module, the
+	  module will be called anx7411.ko.
+
+config TYPEC_RT1719
+	tristate "Richtek RT1719 Sink Only Type-C controller driver"
+	depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
+	depends on I2C
+	depends on POWER_SUPPLY
+	select REGMAP_I2C
+	help
+	  Say Y or M here if your system has Richtek RT1719 sink only
+	  Type-C port controller driver.
+
+	  If you choose to build this driver as a dynamically linked module, the
+	  module will be called rt1719.ko
+
+config TYPEC_HD3SS3220
+	tristate "TI HD3SS3220 Type-C DRP Port controller driver"
+	depends on I2C
+	depends on USB_ROLE_SWITCH
+	help
+	  Say Y or M here if your system has TI HD3SS3220 Type-C DRP Port
+	  controller driver.
+
+	  If you choose to build this driver as a dynamically linked module, the
+	  module will be called hd3ss3220.ko.
+
+config TYPEC_STUSB160X
+	tristate "STMicroelectronics STUSB160x Type-C controller driver"
+	depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y or M here if your system has STMicroelectronics STUSB160x
+	  Type-C port controller.
+
+	  If you choose to build this driver as a dynamically linked module, the
+	  module will be called stusb160x.ko.
+
+config TYPEC_QCOM_PMIC
+	tristate "Qualcomm PMIC USB Type-C driver"
+	depends on ARCH_QCOM || COMPILE_TEST
+	depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
+	help
+	  Driver for supporting role switch over the Qualcomm PMIC.  This will
+	  handle the USB Type-C role and orientation detection reported by the
+	  QCOM PMIC if the PMIC has the capability to handle USB Type-C
+	  detection.
+
+	  It will also enable the VBUS output to connected devices when a
+	  DFP connection is made.
+
+config TYPEC_WUSB3801
+	tristate "Willsemi WUSB3801 Type-C port controller driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y or M here if your system has a WUSB3801 Type-C port controller.
+
+	  If you choose to build this driver as a dynamically linked module, the
+	  module will be called wusb3801.ko.
+
+source "drivers/usb/typec/mux/Kconfig"
+
+source "drivers/usb/typec/altmodes/Kconfig"
+
+endif # TYPEC
diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
new file mode 100644
index 000000000..4a83dad51
--- /dev/null
+++ b/drivers/usb/typec/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_TYPEC)		+= typec.o
+typec-y				:= class.o mux.o bus.o pd.o retimer.o
+typec-$(CONFIG_ACPI)		+= port-mapper.o
+obj-$(CONFIG_TYPEC)		+= altmodes/
+obj-$(CONFIG_TYPEC_TCPM)	+= tcpm/
+obj-$(CONFIG_TYPEC_UCSI)	+= ucsi/
+obj-$(CONFIG_TYPEC_TPS6598X)	+= tipd/
+obj-$(CONFIG_TYPEC_ANX7411)	+= anx7411.o
+obj-$(CONFIG_TYPEC_HD3SS3220)	+= hd3ss3220.o
+obj-$(CONFIG_TYPEC_QCOM_PMIC)	+= qcom-pmic-typec.o
+obj-$(CONFIG_TYPEC_STUSB160X) 	+= stusb160x.o
+obj-$(CONFIG_TYPEC_RT1719)	+= rt1719.o
+obj-$(CONFIG_TYPEC_WUSB3801)	+= wusb3801.o
+obj-$(CONFIG_TYPEC)		+= mux/
diff --git a/drivers/usb/typec/altmodes/Kconfig b/drivers/usb/typec/altmodes/Kconfig
new file mode 100644
index 000000000..1a6b5e872
--- /dev/null
+++ b/drivers/usb/typec/altmodes/Kconfig
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "USB Type-C Alternate Mode drivers"
+
+config TYPEC_DP_ALTMODE
+	tristate "DisplayPort Alternate Mode driver"
+	depends on DRM
+	help
+	  DisplayPort USB Type-C Alternate Mode allows DisplayPort
+	  displays and adapters to be attached to the USB Type-C
+	  connectors on the system.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called typec_displayport.
+
+config TYPEC_NVIDIA_ALTMODE
+	tristate "NVIDIA Alternate Mode driver"
+	depends on TYPEC_DP_ALTMODE
+	help
+	  Latest NVIDIA GPUs support VirtualLink devices. Select this
+	  to enable support for VirtualLink devices with NVIDIA GPUs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called typec_nvidia.
+
+endmenu
diff --git a/drivers/usb/typec/altmodes/Makefile b/drivers/usb/typec/altmodes/Makefile
new file mode 100644
index 000000000..45717548b
--- /dev/null
+++ b/drivers/usb/typec/altmodes/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_TYPEC_DP_ALTMODE)		+= typec_displayport.o
+typec_displayport-y			:= displayport.o
+obj-$(CONFIG_TYPEC_NVIDIA_ALTMODE)	+= typec_nvidia.o
+typec_nvidia-y				:= nvidia.o
diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c
new file mode 100644
index 000000000..f564d0d47
--- /dev/null
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -0,0 +1,638 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Typec-C DisplayPort Alternate Mode driver
+ *
+ * Copyright (C) 2018 Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ *
+ * DisplayPort is trademark of VESA (www.vesa.org)
+ */
+
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/usb/pd_vdo.h>
+#include <linux/usb/typec_dp.h>
+#include <drm/drm_connector.h>
+#include "displayport.h"
+
+#define DP_HEADER(_dp, ver, cmd)	(VDO((_dp)->alt->svid, 1, ver, cmd)	\
+					 | VDO_OPOS(USB_TYPEC_DP_MODE))
+
+enum {
+	DP_CONF_USB,
+	DP_CONF_DFP_D,
+	DP_CONF_UFP_D,
+	DP_CONF_DUAL_D,
+};
+
+/* Pin assignments that use USB3.1 Gen2 signaling to carry DP protocol */
+#define DP_PIN_ASSIGN_GEN2_BR_MASK	(BIT(DP_PIN_ASSIGN_A) | \
+					 BIT(DP_PIN_ASSIGN_B))
+
+/* Pin assignments that use DP v1.3 signaling to carry DP protocol */
+#define DP_PIN_ASSIGN_DP_BR_MASK	(BIT(DP_PIN_ASSIGN_C) | \
+					 BIT(DP_PIN_ASSIGN_D) | \
+					 BIT(DP_PIN_ASSIGN_E) | \
+					 BIT(DP_PIN_ASSIGN_F))
+
+/* DP only pin assignments */
+#define DP_PIN_ASSIGN_DP_ONLY_MASK	(BIT(DP_PIN_ASSIGN_A) | \
+					 BIT(DP_PIN_ASSIGN_C) | \
+					 BIT(DP_PIN_ASSIGN_E))
+
+/* Pin assignments where one channel is for USB */
+#define DP_PIN_ASSIGN_MULTI_FUNC_MASK	(BIT(DP_PIN_ASSIGN_B) | \
+					 BIT(DP_PIN_ASSIGN_D) | \
+					 BIT(DP_PIN_ASSIGN_F))
+
+enum dp_state {
+	DP_STATE_IDLE,
+	DP_STATE_ENTER,
+	DP_STATE_UPDATE,
+	DP_STATE_CONFIGURE,
+	DP_STATE_EXIT,
+};
+
+struct dp_altmode {
+	struct typec_displayport_data data;
+
+	enum dp_state state;
+	bool hpd;
+	bool pending_hpd;
+
+	struct mutex lock; /* device lock */
+	struct work_struct work;
+	struct typec_altmode *alt;
+	const struct typec_altmode *port;
+	struct fwnode_handle *connector_fwnode;
+};
+
+static int dp_altmode_notify(struct dp_altmode *dp)
+{
+	unsigned long conf;
+	u8 state;
+
+	if (dp->data.conf) {
+		state = get_count_order(DP_CONF_GET_PIN_ASSIGN(dp->data.conf));
+		conf = TYPEC_MODAL_STATE(state);
+	} else {
+		conf = TYPEC_STATE_USB;
+	}
+
+	return typec_altmode_notify(dp->alt, conf, &dp->data);
+}
+
+static int dp_altmode_configure(struct dp_altmode *dp, u8 con)
+{
+	u32 conf = DP_CONF_SIGNALING_DP; /* Only DP signaling supported */
+	u8 pin_assign = 0;
+
+	switch (con) {
+	case DP_STATUS_CON_DISABLED:
+		return 0;
+	case DP_STATUS_CON_DFP_D:
+		conf |= DP_CONF_UFP_U_AS_DFP_D;
+		pin_assign = DP_CAP_UFP_D_PIN_ASSIGN(dp->alt->vdo) &
+			     DP_CAP_DFP_D_PIN_ASSIGN(dp->port->vdo);
+		break;
+	case DP_STATUS_CON_UFP_D:
+	case DP_STATUS_CON_BOTH: /* NOTE: First acting as DP source */
+		conf |= DP_CONF_UFP_U_AS_UFP_D;
+		pin_assign = DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo) &
+				 DP_CAP_PIN_ASSIGN_DFP_D(dp->port->vdo);
+		break;
+	default:
+		break;
+	}
+
+	/* Determining the initial pin assignment. */
+	if (!DP_CONF_GET_PIN_ASSIGN(dp->data.conf)) {
+		/* Is USB together with DP preferred */
+		if (dp->data.status & DP_STATUS_PREFER_MULTI_FUNC &&
+		    pin_assign & DP_PIN_ASSIGN_MULTI_FUNC_MASK)
+			pin_assign &= DP_PIN_ASSIGN_MULTI_FUNC_MASK;
+		else if (pin_assign & DP_PIN_ASSIGN_DP_ONLY_MASK) {
+			pin_assign &= DP_PIN_ASSIGN_DP_ONLY_MASK;
+			/* Default to pin assign C if available */
+			if (pin_assign & BIT(DP_PIN_ASSIGN_C))
+				pin_assign = BIT(DP_PIN_ASSIGN_C);
+		}
+
+		if (!pin_assign)
+			return -EINVAL;
+
+		conf |= DP_CONF_SET_PIN_ASSIGN(pin_assign);
+	}
+
+	dp->data.conf = conf;
+
+	return 0;
+}
+
+static int dp_altmode_status_update(struct dp_altmode *dp)
+{
+	bool configured = !!DP_CONF_GET_PIN_ASSIGN(dp->data.conf);
+	bool hpd = !!(dp->data.status & DP_STATUS_HPD_STATE);
+	u8 con = DP_STATUS_CONNECTION(dp->data.status);
+	int ret = 0;
+
+	if (configured && (dp->data.status & DP_STATUS_SWITCH_TO_USB)) {
+		dp->data.conf = 0;
+		dp->state = DP_STATE_CONFIGURE;
+	} else if (dp->data.status & DP_STATUS_EXIT_DP_MODE) {
+		dp->state = DP_STATE_EXIT;
+	} else if (!(con & DP_CONF_CURRENTLY(dp->data.conf))) {
+		ret = dp_altmode_configure(dp, con);
+		if (!ret) {
+			dp->state = DP_STATE_CONFIGURE;
+			if (dp->hpd != hpd) {
+				dp->hpd = hpd;
+				dp->pending_hpd = true;
+			}
+		}
+	} else {
+		if (dp->hpd != hpd) {
+			drm_connector_oob_hotplug_event(dp->connector_fwnode);
+			dp->hpd = hpd;
+		}
+	}
+
+	return ret;
+}
+
+static int dp_altmode_configured(struct dp_altmode *dp)
+{
+	sysfs_notify(&dp->alt->dev.kobj, "displayport", "configuration");
+	sysfs_notify(&dp->alt->dev.kobj, "displayport", "pin_assignment");
+	/*
+	 * If the DFP_D/UFP_D sends a change in HPD when first notifying the
+	 * DisplayPort driver that it is connected, then we wait until
+	 * configuration is complete to signal HPD.
+	 */
+	if (dp->pending_hpd) {
+		drm_connector_oob_hotplug_event(dp->connector_fwnode);
+		sysfs_notify(&dp->alt->dev.kobj, "displayport", "hpd");
+		dp->pending_hpd = false;
+	}
+
+	return dp_altmode_notify(dp);
+}
+
+static int dp_altmode_configure_vdm(struct dp_altmode *dp, u32 conf)
+{
+	int svdm_version = typec_altmode_get_svdm_version(dp->alt);
+	u32 header;
+	int ret;
+
+	if (svdm_version < 0)
+		return svdm_version;
+
+	header = DP_HEADER(dp, svdm_version, DP_CMD_CONFIGURE);
+	ret = typec_altmode_notify(dp->alt, TYPEC_STATE_SAFE, &dp->data);
+	if (ret) {
+		dev_err(&dp->alt->dev,
+			"unable to put to connector to safe mode\n");
+		return ret;
+	}
+
+	ret = typec_altmode_vdm(dp->alt, header, &conf, 2);
+	if (ret)
+		dp_altmode_notify(dp);
+
+	return ret;
+}
+
+static void dp_altmode_work(struct work_struct *work)
+{
+	struct dp_altmode *dp = container_of(work, struct dp_altmode, work);
+	int svdm_version;
+	u32 header;
+	u32 vdo;
+	int ret;
+
+	mutex_lock(&dp->lock);
+
+	switch (dp->state) {
+	case DP_STATE_ENTER:
+		ret = typec_altmode_enter(dp->alt, NULL);
+		if (ret && ret != -EBUSY)
+			dev_err(&dp->alt->dev, "failed to enter mode\n");
+		break;
+	case DP_STATE_UPDATE:
+		svdm_version = typec_altmode_get_svdm_version(dp->alt);
+		if (svdm_version < 0)
+			break;
+		header = DP_HEADER(dp, svdm_version, DP_CMD_STATUS_UPDATE);
+		vdo = 1;
+		ret = typec_altmode_vdm(dp->alt, header, &vdo, 2);
+		if (ret)
+			dev_err(&dp->alt->dev,
+				"unable to send Status Update command (%d)\n",
+				ret);
+		break;
+	case DP_STATE_CONFIGURE:
+		ret = dp_altmode_configure_vdm(dp, dp->data.conf);
+		if (ret)
+			dev_err(&dp->alt->dev,
+				"unable to send Configure command (%d)\n", ret);
+		break;
+	case DP_STATE_EXIT:
+		if (typec_altmode_exit(dp->alt))
+			dev_err(&dp->alt->dev, "Exit Mode Failed!\n");
+		break;
+	default:
+		break;
+	}
+
+	dp->state = DP_STATE_IDLE;
+
+	mutex_unlock(&dp->lock);
+}
+
+static void dp_altmode_attention(struct typec_altmode *alt, const u32 vdo)
+{
+	struct dp_altmode *dp = typec_altmode_get_drvdata(alt);
+	u8 old_state;
+
+	mutex_lock(&dp->lock);
+
+	old_state = dp->state;
+	dp->data.status = vdo;
+
+	if (old_state != DP_STATE_IDLE)
+		dev_warn(&alt->dev, "ATTENTION while processing state %d\n",
+			 old_state);
+
+	if (dp_altmode_status_update(dp))
+		dev_warn(&alt->dev, "%s: status update failed\n", __func__);
+
+	if (dp_altmode_notify(dp))
+		dev_err(&alt->dev, "%s: notification failed\n", __func__);
+
+	if (old_state == DP_STATE_IDLE && dp->state != DP_STATE_IDLE)
+		schedule_work(&dp->work);
+
+	mutex_unlock(&dp->lock);
+}
+
+static int dp_altmode_vdm(struct typec_altmode *alt,
+			  const u32 hdr, const u32 *vdo, int count)
+{
+	struct dp_altmode *dp = typec_altmode_get_drvdata(alt);
+	int cmd_type = PD_VDO_CMDT(hdr);
+	int cmd = PD_VDO_CMD(hdr);
+	int ret = 0;
+
+	mutex_lock(&dp->lock);
+
+	if (dp->state != DP_STATE_IDLE) {
+		ret = -EBUSY;
+		goto err_unlock;
+	}
+
+	switch (cmd_type) {
+	case CMDT_RSP_ACK:
+		switch (cmd) {
+		case CMD_ENTER_MODE:
+			dp->state = DP_STATE_UPDATE;
+			break;
+		case CMD_EXIT_MODE:
+			dp->data.status = 0;
+			dp->data.conf = 0;
+			if (dp->hpd) {
+				drm_connector_oob_hotplug_event(dp->connector_fwnode);
+				dp->hpd = false;
+				sysfs_notify(&dp->alt->dev.kobj, "displayport", "hpd");
+			}
+			break;
+		case DP_CMD_STATUS_UPDATE:
+			dp->data.status = *vdo;
+			ret = dp_altmode_status_update(dp);
+			break;
+		case DP_CMD_CONFIGURE:
+			ret = dp_altmode_configured(dp);
+			break;
+		default:
+			break;
+		}
+		break;
+	case CMDT_RSP_NAK:
+		switch (cmd) {
+		case DP_CMD_CONFIGURE:
+			dp->data.conf = 0;
+			ret = dp_altmode_configured(dp);
+			break;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	if (dp->state != DP_STATE_IDLE)
+		schedule_work(&dp->work);
+
+err_unlock:
+	mutex_unlock(&dp->lock);
+	return ret;
+}
+
+static int dp_altmode_activate(struct typec_altmode *alt, int activate)
+{
+	return activate ? typec_altmode_enter(alt, NULL) :
+			  typec_altmode_exit(alt);
+}
+
+static const struct typec_altmode_ops dp_altmode_ops = {
+	.attention = dp_altmode_attention,
+	.vdm = dp_altmode_vdm,
+	.activate = dp_altmode_activate,
+};
+
+static const char * const configurations[] = {
+	[DP_CONF_USB]	= "USB",
+	[DP_CONF_DFP_D]	= "source",
+	[DP_CONF_UFP_D]	= "sink",
+};
+
+static ssize_t
+configuration_store(struct device *dev, struct device_attribute *attr,
+		    const char *buf, size_t size)
+{
+	struct dp_altmode *dp = dev_get_drvdata(dev);
+	u32 conf;
+	u32 cap;
+	int con;
+	int ret = 0;
+
+	con = sysfs_match_string(configurations, buf);
+	if (con < 0)
+		return con;
+
+	mutex_lock(&dp->lock);
+
+	if (dp->state != DP_STATE_IDLE) {
+		ret = -EBUSY;
+		goto err_unlock;
+	}
+
+	cap = DP_CAP_CAPABILITY(dp->alt->vdo);
+
+	if ((con == DP_CONF_DFP_D && !(cap & DP_CAP_DFP_D)) ||
+	    (con == DP_CONF_UFP_D && !(cap & DP_CAP_UFP_D))) {
+		ret = -EINVAL;
+		goto err_unlock;
+	}
+
+	conf = dp->data.conf & ~DP_CONF_DUAL_D;
+	conf |= con;
+
+	if (dp->alt->active) {
+		ret = dp_altmode_configure_vdm(dp, conf);
+		if (ret)
+			goto err_unlock;
+	}
+
+	dp->data.conf = conf;
+
+err_unlock:
+	mutex_unlock(&dp->lock);
+
+	return ret ? ret : size;
+}
+
+static ssize_t configuration_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct dp_altmode *dp = dev_get_drvdata(dev);
+	int len;
+	u8 cap;
+	u8 cur;
+	int i;
+
+	mutex_lock(&dp->lock);
+
+	cap = DP_CAP_CAPABILITY(dp->alt->vdo);
+	cur = DP_CONF_CURRENTLY(dp->data.conf);
+
+	len = sprintf(buf, "%s ", cur ? "USB" : "[USB]");
+
+	for (i = 1; i < ARRAY_SIZE(configurations); i++) {
+		if (i == cur)
+			len += sprintf(buf + len, "[%s] ", configurations[i]);
+		else if ((i == DP_CONF_DFP_D && cap & DP_CAP_DFP_D) ||
+			 (i == DP_CONF_UFP_D && cap & DP_CAP_UFP_D))
+			len += sprintf(buf + len, "%s ", configurations[i]);
+	}
+
+	mutex_unlock(&dp->lock);
+
+	buf[len - 1] = '\n';
+	return len;
+}
+static DEVICE_ATTR_RW(configuration);
+
+static const char * const pin_assignments[] = {
+	[DP_PIN_ASSIGN_A] = "A",
+	[DP_PIN_ASSIGN_B] = "B",
+	[DP_PIN_ASSIGN_C] = "C",
+	[DP_PIN_ASSIGN_D] = "D",
+	[DP_PIN_ASSIGN_E] = "E",
+	[DP_PIN_ASSIGN_F] = "F",
+};
+
+/*
+ * Helper function to extract a peripheral's currently supported
+ * Pin Assignments from its DisplayPort alternate mode state.
+ */
+static u8 get_current_pin_assignments(struct dp_altmode *dp)
+{
+	if (DP_CONF_CURRENTLY(dp->data.conf) == DP_CONF_DFP_D)
+		return DP_CAP_PIN_ASSIGN_DFP_D(dp->alt->vdo);
+	else
+		return DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo);
+}
+
+static ssize_t
+pin_assignment_store(struct device *dev, struct device_attribute *attr,
+		     const char *buf, size_t size)
+{
+	struct dp_altmode *dp = dev_get_drvdata(dev);
+	u8 assignments;
+	u32 conf;
+	int ret;
+
+	ret = sysfs_match_string(pin_assignments, buf);
+	if (ret < 0)
+		return ret;
+
+	conf = DP_CONF_SET_PIN_ASSIGN(BIT(ret));
+	ret = 0;
+
+	mutex_lock(&dp->lock);
+
+	if (conf & dp->data.conf)
+		goto out_unlock;
+
+	if (dp->state != DP_STATE_IDLE) {
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+
+	assignments = get_current_pin_assignments(dp);
+
+	if (!(DP_CONF_GET_PIN_ASSIGN(conf) & assignments)) {
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	conf |= dp->data.conf & ~DP_CONF_PIN_ASSIGNEMENT_MASK;
+
+	/* Only send Configure command if a configuration has been set */
+	if (dp->alt->active && DP_CONF_CURRENTLY(dp->data.conf)) {
+		ret = dp_altmode_configure_vdm(dp, conf);
+		if (ret)
+			goto out_unlock;
+	}
+
+	dp->data.conf = conf;
+
+out_unlock:
+	mutex_unlock(&dp->lock);
+
+	return ret ? ret : size;
+}
+
+static ssize_t pin_assignment_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct dp_altmode *dp = dev_get_drvdata(dev);
+	u8 assignments;
+	int len = 0;
+	u8 cur;
+	int i;
+
+	mutex_lock(&dp->lock);
+
+	cur = get_count_order(DP_CONF_GET_PIN_ASSIGN(dp->data.conf));
+
+	assignments = get_current_pin_assignments(dp);
+
+	for (i = 0; assignments; assignments >>= 1, i++) {
+		if (assignments & 1) {
+			if (i == cur)
+				len += sprintf(buf + len, "[%s] ",
+					       pin_assignments[i]);
+			else
+				len += sprintf(buf + len, "%s ",
+					       pin_assignments[i]);
+		}
+	}
+
+	mutex_unlock(&dp->lock);
+
+	/* get_current_pin_assignments can return 0 when no matching pin assignments are found */
+	if (len == 0)
+		len++;
+
+	buf[len - 1] = '\n';
+	return len;
+}
+static DEVICE_ATTR_RW(pin_assignment);
+
+static struct attribute *dp_altmode_attrs[] = {
+	&dev_attr_configuration.attr,
+	&dev_attr_pin_assignment.attr,
+	NULL
+};
+
+static const struct attribute_group dp_altmode_group = {
+	.name = "displayport",
+	.attrs = dp_altmode_attrs,
+};
+
+int dp_altmode_probe(struct typec_altmode *alt)
+{
+	const struct typec_altmode *port = typec_altmode_get_partner(alt);
+	struct fwnode_handle *fwnode;
+	struct dp_altmode *dp;
+	int ret;
+
+	/* FIXME: Port can only be DFP_U. */
+
+	/* Make sure we have compatiple pin configurations */
+	if (!(DP_CAP_PIN_ASSIGN_DFP_D(port->vdo) &
+	      DP_CAP_PIN_ASSIGN_UFP_D(alt->vdo)) &&
+	    !(DP_CAP_PIN_ASSIGN_UFP_D(port->vdo) &
+	      DP_CAP_PIN_ASSIGN_DFP_D(alt->vdo)))
+		return -ENODEV;
+
+	ret = sysfs_create_group(&alt->dev.kobj, &dp_altmode_group);
+	if (ret)
+		return ret;
+
+	dp = devm_kzalloc(&alt->dev, sizeof(*dp), GFP_KERNEL);
+	if (!dp)
+		return -ENOMEM;
+
+	INIT_WORK(&dp->work, dp_altmode_work);
+	mutex_init(&dp->lock);
+	dp->port = port;
+	dp->alt = alt;
+
+	alt->desc = "DisplayPort";
+	alt->ops = &dp_altmode_ops;
+
+	fwnode = dev_fwnode(alt->dev.parent->parent); /* typec_port fwnode */
+	dp->connector_fwnode = fwnode_find_reference(fwnode, "displayport", 0);
+	if (IS_ERR(dp->connector_fwnode))
+		dp->connector_fwnode = NULL;
+
+	typec_altmode_set_drvdata(alt, dp);
+
+	dp->state = DP_STATE_ENTER;
+	schedule_work(&dp->work);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dp_altmode_probe);
+
+void dp_altmode_remove(struct typec_altmode *alt)
+{
+	struct dp_altmode *dp = typec_altmode_get_drvdata(alt);
+
+	sysfs_remove_group(&alt->dev.kobj, &dp_altmode_group);
+	cancel_work_sync(&dp->work);
+
+	if (dp->connector_fwnode) {
+		if (dp->hpd)
+			drm_connector_oob_hotplug_event(dp->connector_fwnode);
+
+		fwnode_handle_put(dp->connector_fwnode);
+	}
+}
+EXPORT_SYMBOL_GPL(dp_altmode_remove);
+
+static const struct typec_device_id dp_typec_id[] = {
+	{ USB_TYPEC_DP_SID, USB_TYPEC_DP_MODE },
+	{ },
+};
+MODULE_DEVICE_TABLE(typec, dp_typec_id);
+
+static struct typec_altmode_driver dp_altmode_driver = {
+	.id_table = dp_typec_id,
+	.probe = dp_altmode_probe,
+	.remove = dp_altmode_remove,
+	.driver = {
+		.name = "typec_displayport",
+		.owner = THIS_MODULE,
+	},
+};
+module_typec_altmode_driver(dp_altmode_driver);
+
+MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DisplayPort Alternate Mode");
diff --git a/drivers/usb/typec/altmodes/displayport.h b/drivers/usb/typec/altmodes/displayport.h
new file mode 100644
index 000000000..e120364da
--- /dev/null
+++ b/drivers/usb/typec/altmodes/displayport.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#if IS_ENABLED(CONFIG_TYPEC_DP_ALTMODE)
+int dp_altmode_probe(struct typec_altmode *alt);
+void dp_altmode_remove(struct typec_altmode *alt);
+#else
+int dp_altmode_probe(struct typec_altmode *alt) { return -ENOTSUPP; }
+void dp_altmode_remove(struct typec_altmode *alt) { }
+#endif /* CONFIG_TYPEC_DP_ALTMODE */
diff --git a/drivers/usb/typec/altmodes/nvidia.c b/drivers/usb/typec/altmodes/nvidia.c
new file mode 100644
index 000000000..c36769736
--- /dev/null
+++ b/drivers/usb/typec/altmodes/nvidia.c
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 NVIDIA Corporation. All rights reserved.
+ *
+ * NVIDIA USB Type-C Alt Mode Driver
+ */
+#include <linux/module.h>
+#include <linux/usb/typec_altmode.h>
+#include <linux/usb/typec_dp.h>
+#include "displayport.h"
+
+static int nvidia_altmode_probe(struct typec_altmode *alt)
+{
+	if (alt->svid == USB_TYPEC_NVIDIA_VLINK_SID)
+		return dp_altmode_probe(alt);
+	else
+		return -ENOTSUPP;
+}
+
+static void nvidia_altmode_remove(struct typec_altmode *alt)
+{
+	if (alt->svid == USB_TYPEC_NVIDIA_VLINK_SID)
+		dp_altmode_remove(alt);
+}
+
+static const struct typec_device_id nvidia_typec_id[] = {
+	{ USB_TYPEC_NVIDIA_VLINK_SID, TYPEC_ANY_MODE },
+	{ },
+};
+MODULE_DEVICE_TABLE(typec, nvidia_typec_id);
+
+static struct typec_altmode_driver nvidia_altmode_driver = {
+	.id_table = nvidia_typec_id,
+	.probe = nvidia_altmode_probe,
+	.remove = nvidia_altmode_remove,
+	.driver = {
+		.name = "typec_nvidia",
+		.owner = THIS_MODULE,
+	},
+};
+module_typec_altmode_driver(nvidia_altmode_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("NVIDIA USB Type-C Alt Mode Driver");
diff --git a/drivers/usb/typec/anx7411.c b/drivers/usb/typec/anx7411.c
new file mode 100644
index 000000000..b8f3b75fd
--- /dev/null
+++ b/drivers/usb/typec/anx7411.c
@@ -0,0 +1,1599 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * Driver for Analogix ANX7411 USB Type-C and PD controller
+ *
+ * Copyright(c) 2022, Analogix Semiconductor. All rights reserved.
+ *
+ */
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_graph.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/usb/pd.h>
+#include <linux/usb/role.h>
+#include <linux/usb/tcpci.h>
+#include <linux/usb/typec.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
+#include <linux/workqueue.h>
+#include <linux/power_supply.h>
+
+#define TCPC_ADDRESS1		0x58
+#define TCPC_ADDRESS2		0x56
+#define TCPC_ADDRESS3		0x54
+#define TCPC_ADDRESS4		0x52
+#define SPI_ADDRESS1		0x7e
+#define SPI_ADDRESS2		0x6e
+#define SPI_ADDRESS3		0x64
+#define SPI_ADDRESS4		0x62
+
+struct anx7411_i2c_select {
+	u8 tcpc_address;
+	u8 spi_address;
+};
+
+#define VID_ANALOGIX		0x1F29
+#define PID_ANALOGIX		0x7411
+
+/* TCPC register define */
+
+#define ANALOG_CTRL_10		0xAA
+
+#define STATUS_LEN		2
+#define ALERT_0			0xCB
+#define RECEIVED_MSG		BIT(7)
+#define SOFTWARE_INT		BIT(6)
+#define MSG_LEN			32
+#define HEADER_LEN		2
+#define MSG_HEADER		0x00
+#define MSG_TYPE		0x01
+#define MSG_RAWDATA		0x02
+#define MSG_LEN_MASK		0x1F
+
+#define ALERT_1			0xCC
+#define INTP_POW_ON		BIT(7)
+#define INTP_POW_OFF		BIT(6)
+
+#define VBUS_THRESHOLD_H	0xDD
+#define VBUS_THRESHOLD_L	0xDE
+
+#define FW_CTRL_0		0xF0
+#define UNSTRUCT_VDM_EN		BIT(0)
+#define DELAY_200MS		BIT(1)
+#define VSAFE0			0
+#define VSAFE1			BIT(2)
+#define VSAFE2			BIT(3)
+#define VSAFE3			(BIT(2) | BIT(3))
+#define FRS_EN			BIT(7)
+
+#define FW_PARAM		0xF1
+#define DONGLE_IOP		BIT(0)
+
+#define FW_CTRL_2		0xF7
+#define SINK_CTRL_DIS_FLAG	BIT(5)
+
+/* SPI register define */
+#define OCM_CTRL_0		0x6E
+#define OCM_RESET		BIT(6)
+
+#define MAX_VOLTAGE		0xAC
+#define MAX_POWER		0xAD
+#define MIN_POWER		0xAE
+
+#define REQUEST_VOLTAGE		0xAF
+#define VOLTAGE_UNIT		100 /* mV per unit */
+
+#define REQUEST_CURRENT		0xB1
+#define CURRENT_UNIT		50 /* mA per unit */
+
+#define CMD_SEND_BUF		0xC0
+#define CMD_RECV_BUF		0xE0
+
+#define REQ_VOL_20V_IN_100MV	0xC8
+#define REQ_CUR_2_25A_IN_50MA	0x2D
+#define REQ_CUR_3_25A_IN_50MA	0x41
+
+#define DEF_5V			5000
+#define DEF_1_5A		1500
+
+#define LOBYTE(w)		((u8)((w) & 0xFF))
+#define HIBYTE(w)		((u8)(((u16)(w) >> 8) & 0xFF))
+
+enum anx7411_typec_message_type {
+	TYPE_SRC_CAP = 0x00,
+	TYPE_SNK_CAP = 0x01,
+	TYPE_SNK_IDENTITY = 0x02,
+	TYPE_SVID = 0x03,
+	TYPE_SET_SNK_DP_CAP = 0x08,
+	TYPE_PSWAP_REQ = 0x10,
+	TYPE_DSWAP_REQ = 0x11,
+	TYPE_VDM = 0x14,
+	TYPE_OBJ_REQ = 0x16,
+	TYPE_DP_ALT_ENTER = 0x19,
+	TYPE_DP_DISCOVER_MODES_INFO = 0x27,
+	TYPE_GET_DP_CONFIG = 0x29,
+	TYPE_DP_CONFIGURE = 0x2A,
+	TYPE_GET_DP_DISCOVER_MODES_INFO = 0x2E,
+	TYPE_GET_DP_ALT_ENTER = 0x2F,
+};
+
+#define FW_CTRL_1		0xB2
+#define AUTO_PD_EN		BIT(1)
+#define TRYSRC_EN		BIT(2)
+#define TRYSNK_EN		BIT(3)
+#define FORCE_SEND_RDO		BIT(6)
+
+#define FW_VER			0xB4
+#define FW_SUBVER		0xB5
+
+#define INT_MASK		0xB6
+#define INT_STS			0xB7
+#define OCM_BOOT_UP		BIT(0)
+#define OC_OV_EVENT		BIT(1)
+#define VCONN_CHANGE		BIT(2)
+#define VBUS_CHANGE		BIT(3)
+#define CC_STATUS_CHANGE	BIT(4)
+#define DATA_ROLE_CHANGE	BIT(5)
+#define PR_CONSUMER_GOT_POWER	BIT(6)
+#define HPD_STATUS_CHANGE	BIT(7)
+
+#define SYSTEM_STSTUS		0xB8
+/* 0: SINK off; 1: SINK on */
+#define SINK_STATUS		BIT(1)
+/* 0: VCONN off; 1: VCONN on*/
+#define VCONN_STATUS		BIT(2)
+/* 0: vbus off; 1: vbus on*/
+#define VBUS_STATUS		BIT(3)
+/* 1: host; 0:device*/
+#define DATA_ROLE		BIT(5)
+/* 0: Chunking; 1: Unchunked*/
+#define SUPPORT_UNCHUNKING	BIT(6)
+/* 0: HPD low; 1: HPD high*/
+#define HPD_STATUS		BIT(7)
+
+#define DATA_DFP		1
+#define DATA_UFP		2
+#define POWER_SOURCE		1
+#define POWER_SINK		2
+
+#define CC_STATUS		0xB9
+#define CC1_RD			BIT(0)
+#define CC2_RD			BIT(4)
+#define CC1_RA			BIT(1)
+#define CC2_RA			BIT(5)
+#define CC1_RD			BIT(0)
+#define CC1_RP(cc)		(((cc) >> 2) & 0x03)
+#define CC2_RP(cc)		(((cc) >> 6) & 0x03)
+
+#define PD_REV_INIT		0xBA
+
+#define PD_EXT_MSG_CTRL		0xBB
+#define SRC_CAP_EXT_REPLY	BIT(0)
+#define MANUFACTURER_INFO_REPLY	BIT(1)
+#define BATTERY_STS_REPLY	BIT(2)
+#define BATTERY_CAP_REPLY	BIT(3)
+#define ALERT_REPLY		BIT(4)
+#define STATUS_REPLY		BIT(5)
+#define PPS_STATUS_REPLY	BIT(6)
+#define SNK_CAP_EXT_REPLY	BIT(7)
+
+#define NO_CONNECT		0x00
+#define USB3_1_CONNECTED	0x01
+#define DP_ALT_4LANES		0x02
+#define USB3_1_DP_2LANES	0x03
+#define CC1_CONNECTED		0x01
+#define CC2_CONNECTED		0x02
+#define SELECT_PIN_ASSIGMENT_C	0x04
+#define SELECT_PIN_ASSIGMENT_D	0x08
+#define SELECT_PIN_ASSIGMENT_E	0x10
+#define SELECT_PIN_ASSIGMENT_U	0x00
+#define REDRIVER_ADDRESS	0x20
+#define REDRIVER_OFFSET		0x00
+
+#define DP_SVID			0xFF01
+#define VDM_ACK			0x40
+#define VDM_CMD_RES		0x00
+#define VDM_CMD_DIS_ID		0x01
+#define VDM_CMD_DIS_SVID	0x02
+#define VDM_CMD_DIS_MOD		0x03
+#define VDM_CMD_ENTER_MODE	0x04
+#define VDM_CMD_EXIT_MODE	0x05
+#define VDM_CMD_ATTENTION	0x06
+#define VDM_CMD_GET_STS		0x10
+#define VDM_CMD_AND_ACK_MASK	0x5F
+
+#define MAX_ALTMODE		2
+
+#define HAS_SOURCE_CAP		BIT(0)
+#define HAS_SINK_CAP		BIT(1)
+#define HAS_SINK_WATT		BIT(2)
+
+enum anx7411_psy_state {
+	/* copy from drivers/usb/typec/tcpm */
+	ANX7411_PSY_OFFLINE = 0,
+	ANX7411_PSY_FIXED_ONLINE,
+
+	/* private */
+	/* PD keep in, but disconnct power to bq25700,
+	 * this state can be active when higher capacity adapter plug in,
+	 * and change to ONLINE state when higher capacity adapter plug out
+	 */
+	ANX7411_PSY_HANG = 0xff,
+};
+
+struct typec_params {
+	int request_current; /* ma */
+	int request_voltage; /* mv */
+	int cc_connect;
+	int cc_orientation_valid;
+	int cc_status;
+	int data_role;
+	int power_role;
+	int vconn_role;
+	int dp_altmode_enter;
+	int cust_altmode_enter;
+	struct usb_role_switch *role_sw;
+	struct typec_port *port;
+	struct typec_partner *partner;
+	struct typec_mux_dev *typec_mux;
+	struct typec_switch_dev *typec_switch;
+	struct typec_altmode *amode[MAX_ALTMODE];
+	struct typec_altmode *port_amode[MAX_ALTMODE];
+	struct typec_displayport_data data;
+	int pin_assignment;
+	struct typec_capability caps;
+	u32 src_pdo[PDO_MAX_OBJECTS];
+	u32 sink_pdo[PDO_MAX_OBJECTS];
+	u8 caps_flags;
+	u8 src_pdo_nr;
+	u8 sink_pdo_nr;
+	u8 sink_watt;
+	u8 sink_voltage;
+};
+
+#define MAX_BUF_LEN	30
+struct fw_msg {
+	u8 msg_len;
+	u8 msg_type;
+	u8 buf[MAX_BUF_LEN];
+} __packed;
+
+struct anx7411_data {
+	int fw_version;
+	int fw_subversion;
+	struct i2c_client *tcpc_client;
+	struct i2c_client *spi_client;
+	struct fw_msg send_msg;
+	struct fw_msg recv_msg;
+	struct gpio_desc *intp_gpiod;
+	struct fwnode_handle *connector_fwnode;
+	struct typec_params typec;
+	int intp_irq;
+	struct work_struct work;
+	struct workqueue_struct *workqueue;
+	/* Lock for interrupt work queue */
+	struct mutex lock;
+
+	enum anx7411_psy_state psy_online;
+	enum power_supply_usb_type usb_type;
+	struct power_supply *psy;
+	struct power_supply_desc psy_desc;
+	struct device *dev;
+};
+
+static u8 snk_identity[] = {
+	LOBYTE(VID_ANALOGIX), HIBYTE(VID_ANALOGIX), 0x00, 0x82, /* snk_id_hdr */
+	0x00, 0x00, 0x00, 0x00,                                 /* snk_cert */
+	0x00, 0x00, LOBYTE(PID_ANALOGIX), HIBYTE(PID_ANALOGIX), /* 5snk_ama */
+};
+
+static u8 dp_caps[4] = {0xC6, 0x00, 0x00, 0x00};
+
+static int anx7411_reg_read(struct i2c_client *client,
+			    u8 reg_addr)
+{
+	return i2c_smbus_read_byte_data(client, reg_addr);
+}
+
+static int anx7411_reg_block_read(struct i2c_client *client,
+				  u8 reg_addr, u8 len, u8 *buf)
+{
+	return i2c_smbus_read_i2c_block_data(client, reg_addr, len, buf);
+}
+
+static int anx7411_reg_write(struct i2c_client *client,
+			     u8 reg_addr, u8 reg_val)
+{
+	return i2c_smbus_write_byte_data(client, reg_addr, reg_val);
+}
+
+static int anx7411_reg_block_write(struct i2c_client *client,
+				   u8 reg_addr, u8 len, u8 *buf)
+{
+	return i2c_smbus_write_i2c_block_data(client, reg_addr, len, buf);
+}
+
+static struct anx7411_i2c_select anx7411_i2c_addr[] = {
+	{TCPC_ADDRESS1, SPI_ADDRESS1},
+	{TCPC_ADDRESS2, SPI_ADDRESS2},
+	{TCPC_ADDRESS3, SPI_ADDRESS3},
+	{TCPC_ADDRESS4, SPI_ADDRESS4},
+};
+
+static int anx7411_detect_power_mode(struct anx7411_data *ctx)
+{
+	int ret;
+	int mode;
+
+	ret = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT);
+	if (ret < 0)
+		return ret;
+
+	ctx->typec.request_current = ret * CURRENT_UNIT; /* 50ma per unit */
+
+	ret = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE);
+	if (ret < 0)
+		return ret;
+
+	ctx->typec.request_voltage = ret * VOLTAGE_UNIT; /* 100mv per unit */
+
+	if (ctx->psy_online == ANX7411_PSY_OFFLINE) {
+		ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
+		ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
+		power_supply_changed(ctx->psy);
+	}
+
+	if (!ctx->typec.cc_orientation_valid)
+		return 0;
+
+	if (ctx->typec.cc_connect == CC1_CONNECTED)
+		mode = CC1_RP(ctx->typec.cc_status);
+	else
+		mode = CC2_RP(ctx->typec.cc_status);
+	if (mode) {
+		typec_set_pwr_opmode(ctx->typec.port, mode - 1);
+		return 0;
+	}
+
+	typec_set_pwr_opmode(ctx->typec.port, TYPEC_PWR_MODE_PD);
+
+	return 0;
+}
+
+static int anx7411_register_partner(struct anx7411_data *ctx,
+				    int pd, int accessory)
+{
+	struct typec_partner_desc desc;
+	struct typec_partner *partner;
+
+	if (ctx->typec.partner)
+		return 0;
+
+	desc.usb_pd = pd;
+	desc.accessory = accessory;
+	desc.identity = NULL;
+	partner = typec_register_partner(ctx->typec.port, &desc);
+	if (IS_ERR(partner))
+		return PTR_ERR(partner);
+
+	ctx->typec.partner = partner;
+
+	return 0;
+}
+
+static int anx7411_detect_cc_orientation(struct anx7411_data *ctx)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	int ret;
+	int cc1_rd, cc2_rd;
+	int cc1_ra, cc2_ra;
+	int cc1_rp, cc2_rp;
+
+	ret = anx7411_reg_read(ctx->spi_client, CC_STATUS);
+	if (ret < 0)
+		return ret;
+
+	ctx->typec.cc_status = ret;
+
+	cc1_rd = ret & CC1_RD ? 1 : 0;
+	cc2_rd = ret & CC2_RD ? 1 : 0;
+	cc1_ra = ret & CC1_RA ? 1 : 0;
+	cc2_ra = ret & CC2_RA ? 1 : 0;
+	cc1_rp = CC1_RP(ret);
+	cc2_rp = CC2_RP(ret);
+
+	/* Debug cable, nothing to do */
+	if (cc1_rd && cc2_rd) {
+		ctx->typec.cc_orientation_valid = 0;
+		return anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_DEBUG);
+	}
+
+	if (cc1_ra && cc2_ra) {
+		ctx->typec.cc_orientation_valid = 0;
+		return anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_AUDIO);
+	}
+
+	ctx->typec.cc_orientation_valid = 1;
+
+	ret = anx7411_register_partner(ctx, 1, TYPEC_ACCESSORY_NONE);
+	if (ret) {
+		dev_err(dev, "register partner\n");
+		return ret;
+	}
+
+	if (cc1_rd || cc1_rp) {
+		typec_set_orientation(ctx->typec.port, TYPEC_ORIENTATION_NORMAL);
+		ctx->typec.cc_connect = CC1_CONNECTED;
+	}
+
+	if (cc2_rd || cc2_rp) {
+		typec_set_orientation(ctx->typec.port, TYPEC_ORIENTATION_REVERSE);
+		ctx->typec.cc_connect = CC2_CONNECTED;
+	}
+
+	return 0;
+}
+
+static int anx7411_set_mux(struct anx7411_data *ctx, int pin_assignment)
+{
+	int mode = TYPEC_STATE_SAFE;
+
+	switch (pin_assignment) {
+	case SELECT_PIN_ASSIGMENT_U:
+		/* default 4 line USB 3.1 */
+		mode = TYPEC_STATE_MODAL;
+		break;
+	case SELECT_PIN_ASSIGMENT_C:
+	case SELECT_PIN_ASSIGMENT_E:
+		/* 4 line DP */
+		mode = TYPEC_STATE_SAFE;
+		break;
+	case SELECT_PIN_ASSIGMENT_D:
+		/* 2 line DP, 2 line USB */
+		mode = TYPEC_MODE_USB3;
+		break;
+	default:
+		mode = TYPEC_STATE_SAFE;
+		break;
+	}
+
+	ctx->typec.pin_assignment = pin_assignment;
+
+	return typec_set_mode(ctx->typec.port, mode);
+}
+
+static int anx7411_set_usb_role(struct anx7411_data *ctx, enum usb_role role)
+{
+	if (!ctx->typec.role_sw)
+		return 0;
+
+	return usb_role_switch_set_role(ctx->typec.role_sw, role);
+}
+
+static int anx7411_data_role_detect(struct anx7411_data *ctx)
+{
+	int ret;
+
+	ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS);
+	if (ret < 0)
+		return ret;
+
+	ctx->typec.data_role = (ret & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE;
+	ctx->typec.vconn_role = (ret & VCONN_STATUS) ? TYPEC_SOURCE : TYPEC_SINK;
+
+	typec_set_data_role(ctx->typec.port, ctx->typec.data_role);
+
+	typec_set_vconn_role(ctx->typec.port, ctx->typec.vconn_role);
+
+	if (ctx->typec.data_role == TYPEC_HOST)
+		return anx7411_set_usb_role(ctx, USB_ROLE_HOST);
+
+	return anx7411_set_usb_role(ctx, USB_ROLE_DEVICE);
+}
+
+static int anx7411_power_role_detect(struct anx7411_data *ctx)
+{
+	int ret;
+
+	ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS);
+	if (ret < 0)
+		return ret;
+
+	ctx->typec.power_role = (ret & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE;
+
+	if (ctx->typec.power_role == TYPEC_SOURCE) {
+		ctx->typec.request_current = DEF_1_5A;
+		ctx->typec.request_voltage = DEF_5V;
+	}
+
+	typec_set_pwr_role(ctx->typec.port, ctx->typec.power_role);
+
+	return 0;
+}
+
+static int anx7411_cc_status_detect(struct anx7411_data *ctx)
+{
+	anx7411_detect_cc_orientation(ctx);
+	anx7411_detect_power_mode(ctx);
+
+	return 0;
+}
+
+static void anx7411_partner_unregister_altmode(struct anx7411_data *ctx)
+{
+	int i;
+
+	ctx->typec.dp_altmode_enter = 0;
+	ctx->typec.cust_altmode_enter = 0;
+
+	for (i = 0; i < MAX_ALTMODE; i++)
+		if (ctx->typec.amode[i]) {
+			typec_unregister_altmode(ctx->typec.amode[i]);
+			ctx->typec.amode[i] = NULL;
+		}
+
+	ctx->typec.pin_assignment = 0;
+}
+
+static int anx7411_typec_register_altmode(struct anx7411_data *ctx,
+					  int svid, int vdo)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	struct typec_altmode_desc desc;
+	int err;
+	int i;
+
+	desc.svid = svid;
+	desc.vdo = vdo;
+
+	for (i = 0; i < MAX_ALTMODE; i++)
+		if (!ctx->typec.amode[i])
+			break;
+
+	desc.mode = i + 1; /* start with 1 */
+
+	if (i >= MAX_ALTMODE) {
+		dev_err(dev, "no altmode space for registering\n");
+		return -ENOMEM;
+	}
+
+	ctx->typec.amode[i] = typec_partner_register_altmode(ctx->typec.partner,
+							     &desc);
+	if (IS_ERR(ctx->typec.amode[i])) {
+		dev_err(dev, "failed to register altmode\n");
+		err = PTR_ERR(ctx->typec.amode[i]);
+		ctx->typec.amode[i] = NULL;
+		return err;
+	}
+
+	return 0;
+}
+
+static void anx7411_unregister_partner(struct anx7411_data *ctx)
+{
+	if (ctx->typec.partner) {
+		typec_unregister_partner(ctx->typec.partner);
+		ctx->typec.partner = NULL;
+	}
+}
+
+static int anx7411_update_altmode(struct anx7411_data *ctx, int svid)
+{
+	int i;
+
+	if (svid == DP_SVID)
+		ctx->typec.dp_altmode_enter = 1;
+	else
+		ctx->typec.cust_altmode_enter = 1;
+
+	for (i = 0; i < MAX_ALTMODE; i++) {
+		if (!ctx->typec.amode[i])
+			continue;
+
+		if (ctx->typec.amode[i]->svid == svid) {
+			typec_altmode_update_active(ctx->typec.amode[i], true);
+			typec_altmode_notify(ctx->typec.amode[i],
+					     ctx->typec.pin_assignment,
+					     &ctx->typec.data);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int anx7411_register_altmode(struct anx7411_data *ctx,
+				    bool dp_altmode, u8 *buf)
+{
+	int ret;
+	int svid;
+	int mid;
+
+	if (!ctx->typec.partner)
+		return 0;
+
+	svid = DP_SVID;
+	if (dp_altmode) {
+		mid = buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
+
+		return anx7411_typec_register_altmode(ctx, svid, mid);
+	}
+
+	svid = (buf[3] << 8) | buf[2];
+	if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_ENTER_MODE))
+		return anx7411_update_altmode(ctx, svid);
+
+	if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_DIS_MOD))
+		return 0;
+
+	mid = buf[4] | (buf[5] << 8) | (buf[6] << 16) | (buf[7] << 24);
+
+	ret = anx7411_typec_register_altmode(ctx, svid, mid);
+	if (ctx->typec.cust_altmode_enter)
+		ret |= anx7411_update_altmode(ctx, svid);
+
+	return ret;
+}
+
+static int anx7411_parse_cmd(struct anx7411_data *ctx, u8 type, u8 *buf, u8 len)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	u8 cur_50ma, vol_100mv;
+
+	switch (type) {
+	case TYPE_SRC_CAP:
+		cur_50ma = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT);
+		vol_100mv = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE);
+
+		ctx->typec.request_voltage = vol_100mv * VOLTAGE_UNIT;
+		ctx->typec.request_current = cur_50ma * CURRENT_UNIT;
+
+		ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
+		ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
+		power_supply_changed(ctx->psy);
+		break;
+	case TYPE_SNK_CAP:
+		break;
+	case TYPE_SVID:
+		break;
+	case TYPE_SNK_IDENTITY:
+		break;
+	case TYPE_GET_DP_ALT_ENTER:
+		/* DP alt mode enter success */
+		if (buf[0])
+			anx7411_update_altmode(ctx, DP_SVID);
+		break;
+	case TYPE_DP_ALT_ENTER:
+		/* Update DP altmode */
+		anx7411_update_altmode(ctx, DP_SVID);
+		break;
+	case TYPE_OBJ_REQ:
+		anx7411_detect_power_mode(ctx);
+		break;
+	case TYPE_DP_CONFIGURE:
+		anx7411_set_mux(ctx, buf[1]);
+		break;
+	case TYPE_DP_DISCOVER_MODES_INFO:
+		/* Make sure discover modes valid */
+		if (buf[0] | buf[1])
+			/* Register DP Altmode */
+			anx7411_register_altmode(ctx, 1, buf);
+		break;
+	case TYPE_VDM:
+		/* Register other altmode */
+		anx7411_register_altmode(ctx, 0, buf);
+		break;
+	default:
+		dev_err(dev, "ignore message(0x%.02x).\n", type);
+		break;
+	}
+
+	return 0;
+}
+
+static u8 checksum(struct device *dev, u8 *buf, u8 len)
+{
+	u8 ret = 0;
+	u8 i;
+
+	for (i = 0; i < len; i++)
+		ret += buf[i];
+
+	return ret;
+}
+
+static int anx7411_read_msg_ctrl_status(struct i2c_client *client)
+{
+	return anx7411_reg_read(client, CMD_SEND_BUF);
+}
+
+static int anx7411_wait_msg_empty(struct i2c_client *client)
+{
+	int val;
+
+	return readx_poll_timeout(anx7411_read_msg_ctrl_status,
+				  client, val, (val < 0) || (val == 0),
+				  2000, 2000 * 150);
+}
+
+static int anx7411_send_msg(struct anx7411_data *ctx, u8 type, u8 *buf, u8 size)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	struct fw_msg *msg = &ctx->send_msg;
+	u8 crc;
+	int ret;
+
+	size = min_t(u8, size, (u8)MAX_BUF_LEN);
+	memcpy(msg->buf, buf, size);
+	msg->msg_type = type;
+	/* msg len equals buffer length + msg_type */
+	msg->msg_len = size + 1;
+
+	/* Do CRC check for all buffer data and msg_len and msg_type */
+	crc = checksum(dev, (u8 *)msg, size + HEADER_LEN);
+	msg->buf[size] = 0 - crc;
+
+	ret = anx7411_wait_msg_empty(ctx->spi_client);
+	if (ret)
+		return ret;
+
+	ret = anx7411_reg_block_write(ctx->spi_client,
+				      CMD_SEND_BUF + 1, size + HEADER_LEN,
+				      &msg->msg_type);
+	ret |= anx7411_reg_write(ctx->spi_client, CMD_SEND_BUF,
+				 msg->msg_len);
+	return ret;
+}
+
+static int anx7411_process_cmd(struct anx7411_data *ctx)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	struct fw_msg *msg = &ctx->recv_msg;
+	u8 len;
+	u8 crc;
+	int ret;
+
+	/* Read message from firmware */
+	ret = anx7411_reg_block_read(ctx->spi_client, CMD_RECV_BUF,
+				     MSG_LEN, (u8 *)msg);
+	if (ret < 0)
+		return 0;
+
+	if (!msg->msg_len)
+		return 0;
+
+	ret = anx7411_reg_write(ctx->spi_client, CMD_RECV_BUF, 0);
+	if (ret)
+		return ret;
+
+	len = msg->msg_len & MSG_LEN_MASK;
+	crc = checksum(dev, (u8 *)msg, len + HEADER_LEN);
+	if (crc) {
+		dev_err(dev, "message error crc(0x%.02x)\n", crc);
+		return -ERANGE;
+	}
+
+	return anx7411_parse_cmd(ctx, msg->msg_type, msg->buf, len - 1);
+}
+
+static void anx7411_translate_payload(struct device *dev, __le32 *payload,
+				      u32 *pdo, int nr, const char *type)
+{
+	int i;
+
+	if (nr > PDO_MAX_OBJECTS) {
+		dev_err(dev, "nr(%d) exceed PDO_MAX_OBJECTS(%d)\n",
+			nr, PDO_MAX_OBJECTS);
+
+		return;
+	}
+
+	for (i = 0; i < nr; i++)
+		payload[i] = cpu_to_le32(pdo[i]);
+}
+
+static int anx7411_config(struct anx7411_data *ctx)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	struct typec_params *typecp = &ctx->typec;
+	__le32 payload[PDO_MAX_OBJECTS];
+	int ret;
+
+	/* Config PD FW work under PD 2.0 */
+	ret = anx7411_reg_write(ctx->spi_client, PD_REV_INIT, PD_REV20);
+	ret |= anx7411_reg_write(ctx->tcpc_client, FW_CTRL_0,
+				 UNSTRUCT_VDM_EN | DELAY_200MS |
+				 VSAFE1 | FRS_EN);
+	ret |= anx7411_reg_write(ctx->spi_client, FW_CTRL_1,
+				 AUTO_PD_EN | FORCE_SEND_RDO);
+
+	/* Set VBUS current threshold */
+	ret |= anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_H, 0xff);
+	ret |= anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_L, 0x03);
+
+	/* Fix dongle compatible issue */
+	ret |= anx7411_reg_write(ctx->tcpc_client, FW_PARAM,
+				 anx7411_reg_read(ctx->tcpc_client, FW_PARAM) |
+				 DONGLE_IOP);
+	ret |= anx7411_reg_write(ctx->spi_client, INT_MASK, 0);
+
+	ret |= anx7411_reg_write(ctx->spi_client, PD_EXT_MSG_CTRL, 0xFF);
+	if (ret)
+		return ret;
+
+	if (typecp->caps_flags & HAS_SOURCE_CAP) {
+		anx7411_translate_payload(dev, payload, typecp->src_pdo,
+					  typecp->src_pdo_nr, "source");
+		anx7411_send_msg(ctx, TYPE_SRC_CAP, (u8 *)&payload,
+				 typecp->src_pdo_nr * 4);
+		anx7411_send_msg(ctx, TYPE_SNK_IDENTITY, snk_identity,
+				 sizeof(snk_identity));
+		anx7411_send_msg(ctx, TYPE_SET_SNK_DP_CAP, dp_caps,
+				 sizeof(dp_caps));
+	}
+
+	if (typecp->caps_flags & HAS_SINK_CAP) {
+		anx7411_translate_payload(dev, payload, typecp->sink_pdo,
+					  typecp->sink_pdo_nr, "sink");
+		anx7411_send_msg(ctx, TYPE_SNK_CAP, (u8 *)&payload,
+				 typecp->sink_pdo_nr * 4);
+	}
+
+	if (typecp->caps_flags & HAS_SINK_WATT) {
+		if (typecp->sink_watt) {
+			ret |= anx7411_reg_write(ctx->spi_client, MAX_POWER,
+						 typecp->sink_watt);
+			/* Set min power to 1W */
+			ret |= anx7411_reg_write(ctx->spi_client, MIN_POWER, 2);
+		}
+
+		if (typecp->sink_voltage)
+			ret |= anx7411_reg_write(ctx->spi_client, MAX_VOLTAGE,
+					  typecp->sink_voltage);
+		if (ret)
+			return ret;
+	}
+
+	if (!typecp->caps_flags)
+		usleep_range(5000, 6000);
+
+	ctx->fw_version = anx7411_reg_read(ctx->spi_client, FW_VER);
+	ctx->fw_subversion = anx7411_reg_read(ctx->spi_client, FW_SUBVER);
+
+	return 0;
+}
+
+static void anx7411_chip_standby(struct anx7411_data *ctx)
+{
+	int ret;
+	u8 cc1, cc2;
+	struct device *dev = &ctx->spi_client->dev;
+
+	ret = anx7411_reg_write(ctx->spi_client, OCM_CTRL_0,
+				anx7411_reg_read(ctx->spi_client, OCM_CTRL_0) |
+				OCM_RESET);
+	ret |= anx7411_reg_write(ctx->tcpc_client, ANALOG_CTRL_10, 0x80);
+	/* Set TCPC to RD and DRP enable */
+	cc1 = TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT;
+	cc2 = TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT;
+	ret |= anx7411_reg_write(ctx->tcpc_client, TCPC_ROLE_CTRL,
+				 TCPC_ROLE_CTRL_DRP | cc1 | cc2);
+
+	/* Send DRP toggle command */
+	ret |= anx7411_reg_write(ctx->tcpc_client, TCPC_COMMAND,
+				 TCPC_CMD_LOOK4CONNECTION);
+
+	/* Send TCPC enter standby command */
+	ret |= anx7411_reg_write(ctx->tcpc_client,
+				 TCPC_COMMAND, TCPC_CMD_I2C_IDLE);
+	if (ret)
+		dev_err(dev, "Chip standby failed\n");
+}
+
+static void anx7411_work_func(struct work_struct *work)
+{
+	int ret;
+	u8 buf[STATUS_LEN];
+	u8 int_change; /* Interrupt change */
+	u8 int_status; /* Firmware status update */
+	u8 alert0, alert1; /* Interrupt alert source */
+	struct anx7411_data *ctx = container_of(work, struct anx7411_data, work);
+	struct device *dev = &ctx->spi_client->dev;
+
+	mutex_lock(&ctx->lock);
+
+	/* Read interrupt change status */
+	ret = anx7411_reg_block_read(ctx->spi_client, INT_STS, STATUS_LEN, buf);
+	if (ret < 0) {
+		/* Power standby mode, just return */
+		goto unlock;
+	}
+	int_change = buf[0];
+	int_status = buf[1];
+
+	/* Read alert register */
+	ret = anx7411_reg_block_read(ctx->tcpc_client, ALERT_0, STATUS_LEN, buf);
+	if (ret < 0)
+		goto unlock;
+
+	alert0 = buf[0];
+	alert1 = buf[1];
+
+	/* Clear interrupt and alert status */
+	ret = anx7411_reg_write(ctx->spi_client, INT_STS, 0);
+	ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_0, alert0);
+	ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_1, alert1);
+	if (ret)
+		goto unlock;
+
+	if (alert1 & INTP_POW_OFF) {
+		anx7411_partner_unregister_altmode(ctx);
+		if (anx7411_set_usb_role(ctx, USB_ROLE_NONE))
+			dev_err(dev, "Set usb role\n");
+		anx7411_unregister_partner(ctx);
+		ctx->psy_online = ANX7411_PSY_OFFLINE;
+		ctx->usb_type = POWER_SUPPLY_USB_TYPE_C;
+		ctx->typec.request_voltage = 0;
+		ctx->typec.request_current = 0;
+		power_supply_changed(ctx->psy);
+		anx7411_chip_standby(ctx);
+		goto unlock;
+	}
+
+	if ((alert0 & SOFTWARE_INT) && (int_change & OCM_BOOT_UP)) {
+		if (anx7411_config(ctx))
+			dev_err(dev, "Config failed\n");
+		if (anx7411_data_role_detect(ctx))
+			dev_err(dev, "set PD data role\n");
+		if (anx7411_power_role_detect(ctx))
+			dev_err(dev, "set PD power role\n");
+		anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C);
+	}
+
+	if (alert0 & RECEIVED_MSG)
+		anx7411_process_cmd(ctx);
+
+	ret = (int_status & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE;
+	if (ctx->typec.data_role != ret)
+		if (anx7411_data_role_detect(ctx))
+			dev_err(dev, "set PD data role\n");
+
+	ret = (int_status & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE;
+	if (ctx->typec.power_role != ret)
+		if (anx7411_power_role_detect(ctx))
+			dev_err(dev, "set PD power role\n");
+
+	if ((alert0 & SOFTWARE_INT) && (int_change & CC_STATUS_CHANGE))
+		anx7411_cc_status_detect(ctx);
+
+unlock:
+	mutex_unlock(&ctx->lock);
+}
+
+static irqreturn_t anx7411_intr_isr(int irq, void *data)
+{
+	struct anx7411_data *ctx = (struct anx7411_data *)data;
+
+	queue_work(ctx->workqueue, &ctx->work);
+
+	return IRQ_HANDLED;
+}
+
+static int anx7411_register_i2c_dummy_clients(struct anx7411_data *ctx,
+					      struct i2c_client *client)
+{
+	int i;
+	u8 spi_addr;
+
+	for (i = 0; i < ARRAY_SIZE(anx7411_i2c_addr); i++) {
+		if (client->addr == (anx7411_i2c_addr[i].tcpc_address >> 1)) {
+			spi_addr = anx7411_i2c_addr[i].spi_address >> 1;
+			ctx->spi_client = i2c_new_dummy_device(client->adapter,
+							       spi_addr);
+			if (!IS_ERR(ctx->spi_client))
+				return 0;
+		}
+	}
+
+	dev_err(&client->dev, "unable to get SPI slave\n");
+	return -ENOMEM;
+}
+
+static void anx7411_port_unregister_altmodes(struct typec_altmode **adev)
+{
+	int i;
+
+	for (i = 0; i < MAX_ALTMODE; i++)
+		if (adev[i]) {
+			typec_unregister_altmode(adev[i]);
+			adev[i] = NULL;
+		}
+}
+
+static int anx7411_usb_mux_set(struct typec_mux_dev *mux,
+			       struct typec_mux_state *state)
+{
+	struct anx7411_data *ctx = typec_mux_get_drvdata(mux);
+	struct device *dev = &ctx->spi_client->dev;
+	int has_dp;
+
+	has_dp = (state->alt && state->alt->svid == USB_TYPEC_DP_SID &&
+		  state->alt->mode == USB_TYPEC_DP_MODE);
+	if (!has_dp)
+		dev_err(dev, "dp altmode not register\n");
+
+	return 0;
+}
+
+static int anx7411_usb_set_orientation(struct typec_switch_dev *sw,
+				       enum typec_orientation orientation)
+{
+	/* No need set */
+
+	return 0;
+}
+
+static int anx7411_register_switch(struct anx7411_data *ctx,
+				   struct device *dev,
+				   struct fwnode_handle *fwnode)
+{
+	struct typec_switch_desc sw_desc = { };
+
+	sw_desc.fwnode = fwnode;
+	sw_desc.drvdata = ctx;
+	sw_desc.name = fwnode_get_name(fwnode);
+	sw_desc.set = anx7411_usb_set_orientation;
+
+	ctx->typec.typec_switch = typec_switch_register(dev, &sw_desc);
+	if (IS_ERR(ctx->typec.typec_switch)) {
+		dev_err(dev, "switch register failed\n");
+		return PTR_ERR(ctx->typec.typec_switch);
+	}
+
+	return 0;
+}
+
+static int anx7411_register_mux(struct anx7411_data *ctx,
+				struct device *dev,
+				struct fwnode_handle *fwnode)
+{
+	struct typec_mux_desc mux_desc = { };
+
+	mux_desc.fwnode = fwnode;
+	mux_desc.drvdata = ctx;
+	mux_desc.name = fwnode_get_name(fwnode);
+	mux_desc.set = anx7411_usb_mux_set;
+
+	ctx->typec.typec_mux = typec_mux_register(dev, &mux_desc);
+	if (IS_ERR(ctx->typec.typec_mux)) {
+		dev_err(dev, "mux register failed\n");
+		return PTR_ERR(ctx->typec.typec_mux);
+	}
+
+	return 0;
+}
+
+static void anx7411_unregister_mux(struct anx7411_data *ctx)
+{
+	if (ctx->typec.typec_mux) {
+		typec_mux_unregister(ctx->typec.typec_mux);
+		ctx->typec.typec_mux = NULL;
+	}
+}
+
+static void anx7411_unregister_switch(struct anx7411_data *ctx)
+{
+	if (ctx->typec.typec_switch) {
+		typec_switch_unregister(ctx->typec.typec_switch);
+		ctx->typec.typec_switch = NULL;
+	}
+}
+
+static int anx7411_typec_switch_probe(struct anx7411_data *ctx,
+				      struct device *dev)
+{
+	int ret;
+	struct device_node *node;
+
+	node = of_get_child_by_name(dev->of_node, "orientation_switch");
+	if (!node)
+		return 0;
+
+	ret = anx7411_register_switch(ctx, dev, &node->fwnode);
+	if (ret) {
+		dev_err(dev, "failed register switch");
+		return ret;
+	}
+
+	node = of_get_child_by_name(dev->of_node, "mode_switch");
+	if (!node) {
+		dev_err(dev, "no typec mux exist");
+		ret = -ENODEV;
+		goto unregister_switch;
+	}
+
+	ret = anx7411_register_mux(ctx, dev, &node->fwnode);
+	if (ret) {
+		dev_err(dev, "failed register mode switch");
+		ret = -ENODEV;
+		goto unregister_switch;
+	}
+
+	return 0;
+
+unregister_switch:
+	anx7411_unregister_switch(ctx);
+
+	return ret;
+}
+
+static int anx7411_typec_port_probe(struct anx7411_data *ctx,
+				    struct device *dev)
+{
+	struct typec_capability *cap = &ctx->typec.caps;
+	struct typec_params *typecp = &ctx->typec;
+	struct fwnode_handle *fwnode;
+	const char *buf;
+	int ret, i;
+
+	fwnode = device_get_named_child_node(dev, "connector");
+	if (!fwnode)
+		return -EINVAL;
+
+	ret = fwnode_property_read_string(fwnode, "power-role", &buf);
+	if (ret) {
+		dev_err(dev, "power-role not found: %d\n", ret);
+		return ret;
+	}
+
+	ret = typec_find_port_power_role(buf);
+	if (ret < 0)
+		return ret;
+	cap->type = ret;
+
+	ret = fwnode_property_read_string(fwnode, "data-role", &buf);
+	if (ret) {
+		dev_err(dev, "data-role not found: %d\n", ret);
+		return ret;
+	}
+
+	ret = typec_find_port_data_role(buf);
+	if (ret < 0)
+		return ret;
+	cap->data = ret;
+
+	ret = fwnode_property_read_string(fwnode, "try-power-role", &buf);
+	if (ret) {
+		dev_err(dev, "try-power-role not found: %d\n", ret);
+		return ret;
+	}
+
+	ret = typec_find_power_role(buf);
+	if (ret < 0)
+		return ret;
+	cap->prefer_role = ret;
+
+	/* Get source pdos */
+	ret = fwnode_property_count_u32(fwnode, "source-pdos");
+	if (ret > 0) {
+		typecp->src_pdo_nr = min_t(u8, ret, PDO_MAX_OBJECTS);
+		ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
+						     typecp->src_pdo,
+						     typecp->src_pdo_nr);
+		if (ret < 0) {
+			dev_err(dev, "source cap validate failed: %d\n", ret);
+			return -EINVAL;
+		}
+
+		typecp->caps_flags |= HAS_SOURCE_CAP;
+	}
+
+	ret = fwnode_property_count_u32(fwnode, "sink-pdos");
+	if (ret > 0) {
+		typecp->sink_pdo_nr = min_t(u8, ret, PDO_MAX_OBJECTS);
+		ret = fwnode_property_read_u32_array(fwnode, "sink-pdos",
+						     typecp->sink_pdo,
+						     typecp->sink_pdo_nr);
+		if (ret < 0) {
+			dev_err(dev, "sink cap validate failed: %d\n", ret);
+			return -EINVAL;
+		}
+
+		for (i = 0; i < typecp->sink_pdo_nr; i++) {
+			ret = 0;
+			switch (pdo_type(typecp->sink_pdo[i])) {
+			case PDO_TYPE_FIXED:
+				ret = pdo_fixed_voltage(typecp->sink_pdo[i]);
+				break;
+			case PDO_TYPE_BATT:
+			case PDO_TYPE_VAR:
+				ret = pdo_max_voltage(typecp->sink_pdo[i]);
+				break;
+			case PDO_TYPE_APDO:
+			default:
+				ret = 0;
+				break;
+			}
+
+			/* 100mv per unit */
+			typecp->sink_voltage = max(5000, ret) / 100;
+		}
+
+		typecp->caps_flags |= HAS_SINK_CAP;
+	}
+
+	if (!fwnode_property_read_u32(fwnode, "op-sink-microwatt", &ret)) {
+		typecp->sink_watt = ret / 500000; /* 500mw per unit */
+		typecp->caps_flags |= HAS_SINK_WATT;
+	}
+
+	cap->fwnode = fwnode;
+
+	ctx->typec.role_sw = usb_role_switch_get(dev);
+	if (IS_ERR(ctx->typec.role_sw)) {
+		dev_err(dev, "USB role switch not found.\n");
+		ctx->typec.role_sw = NULL;
+	}
+
+	ctx->typec.port = typec_register_port(dev, cap);
+	if (IS_ERR(ctx->typec.port)) {
+		ret = PTR_ERR(ctx->typec.port);
+		ctx->typec.port = NULL;
+		dev_err(dev, "Failed to register type c port %d\n", ret);
+		return ret;
+	}
+
+	typec_port_register_altmodes(ctx->typec.port, NULL, ctx,
+				     ctx->typec.port_amode,
+				     MAX_ALTMODE);
+	return 0;
+}
+
+static int anx7411_typec_check_connection(struct anx7411_data *ctx)
+{
+	int ret;
+
+	ret = anx7411_reg_read(ctx->spi_client, FW_VER);
+	if (ret < 0)
+		return 0; /* No device attached in typec port */
+
+	/* Clear interrupt and alert status */
+	ret = anx7411_reg_write(ctx->spi_client, INT_STS, 0);
+	ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_0, 0xFF);
+	ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_1, 0xFF);
+	if (ret)
+		return ret;
+
+	ret = anx7411_cc_status_detect(ctx);
+	ret |= anx7411_power_role_detect(ctx);
+	ret |= anx7411_data_role_detect(ctx);
+	ret |= anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C);
+	if (ret)
+		return ret;
+
+	ret = anx7411_send_msg(ctx, TYPE_GET_DP_ALT_ENTER, NULL, 0);
+	ret |= anx7411_send_msg(ctx, TYPE_GET_DP_DISCOVER_MODES_INFO, NULL, 0);
+
+	return ret;
+}
+
+static int __maybe_unused anx7411_runtime_pm_suspend(struct device *dev)
+{
+	struct anx7411_data *ctx = dev_get_drvdata(dev);
+
+	mutex_lock(&ctx->lock);
+
+	anx7411_partner_unregister_altmode(ctx);
+
+	if (ctx->typec.partner)
+		anx7411_unregister_partner(ctx);
+
+	mutex_unlock(&ctx->lock);
+
+	return 0;
+}
+
+static int __maybe_unused anx7411_runtime_pm_resume(struct device *dev)
+{
+	struct anx7411_data *ctx = dev_get_drvdata(dev);
+
+	mutex_lock(&ctx->lock);
+	/* Detect PD connection */
+	if (anx7411_typec_check_connection(ctx))
+		dev_err(dev, "check connection");
+
+	mutex_unlock(&ctx->lock);
+
+	return 0;
+}
+
+static const struct dev_pm_ops anx7411_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(anx7411_runtime_pm_suspend,
+			   anx7411_runtime_pm_resume, NULL)
+};
+
+static void anx7411_get_gpio_irq(struct anx7411_data *ctx)
+{
+	struct device *dev = &ctx->tcpc_client->dev;
+
+	ctx->intp_gpiod = devm_gpiod_get_optional(dev, "interrupt", GPIOD_IN);
+	if (IS_ERR_OR_NULL(ctx->intp_gpiod)) {
+		dev_err(dev, "no interrupt gpio property\n");
+		return;
+	}
+
+	ctx->intp_irq = gpiod_to_irq(ctx->intp_gpiod);
+	if (ctx->intp_irq < 0)
+		dev_err(dev, "failed to get GPIO IRQ\n");
+}
+
+static enum power_supply_usb_type anx7411_psy_usb_types[] = {
+	POWER_SUPPLY_USB_TYPE_C,
+	POWER_SUPPLY_USB_TYPE_PD,
+	POWER_SUPPLY_USB_TYPE_PD_PPS,
+};
+
+static enum power_supply_property anx7411_psy_props[] = {
+	POWER_SUPPLY_PROP_USB_TYPE,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static int anx7411_psy_set_prop(struct power_supply *psy,
+				enum power_supply_property psp,
+				const union power_supply_propval *val)
+{
+	struct anx7411_data *ctx = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	if (psp == POWER_SUPPLY_PROP_ONLINE)
+		ctx->psy_online = val->intval;
+	else
+		ret = -EINVAL;
+
+	power_supply_changed(ctx->psy);
+	return ret;
+}
+
+static int anx7411_psy_prop_writeable(struct power_supply *psy,
+				      enum power_supply_property psp)
+{
+	return psp == POWER_SUPPLY_PROP_ONLINE;
+}
+
+static int anx7411_psy_get_prop(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct anx7411_data *ctx = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		val->intval = ctx->usb_type;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = ctx->psy_online;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		val->intval = (ctx->psy_online) ?
+			ctx->typec.request_voltage * 1000 : 0;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		val->intval = (ctx->psy_online) ?
+			ctx->typec.request_current * 1000 : 0;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int anx7411_psy_register(struct anx7411_data *ctx)
+{
+	struct power_supply_desc *psy_desc = &ctx->psy_desc;
+	struct power_supply_config psy_cfg = {};
+	char *psy_name;
+
+	psy_name = devm_kasprintf(ctx->dev, GFP_KERNEL, "anx7411-source-psy-%s",
+				  dev_name(ctx->dev));
+	if (!psy_name)
+		return -ENOMEM;
+
+	psy_desc->name = psy_name;
+	psy_desc->type = POWER_SUPPLY_TYPE_USB;
+	psy_desc->usb_types = anx7411_psy_usb_types;
+	psy_desc->num_usb_types = ARRAY_SIZE(anx7411_psy_usb_types);
+	psy_desc->properties = anx7411_psy_props;
+	psy_desc->num_properties = ARRAY_SIZE(anx7411_psy_props);
+
+	psy_desc->get_property = anx7411_psy_get_prop;
+	psy_desc->set_property = anx7411_psy_set_prop;
+	psy_desc->property_is_writeable = anx7411_psy_prop_writeable;
+
+	ctx->usb_type = POWER_SUPPLY_USB_TYPE_C;
+	ctx->psy = devm_power_supply_register(ctx->dev, psy_desc, &psy_cfg);
+
+	if (IS_ERR(ctx->psy))
+		dev_warn(ctx->dev, "unable to register psy\n");
+
+	return PTR_ERR_OR_ZERO(ctx->psy);
+}
+
+static int anx7411_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct anx7411_data *plat;
+	struct device *dev = &client->dev;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
+		return -ENODEV;
+
+	plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
+	if (!plat)
+		return -ENOMEM;
+
+	plat->tcpc_client = client;
+	i2c_set_clientdata(client, plat);
+
+	mutex_init(&plat->lock);
+
+	ret = anx7411_register_i2c_dummy_clients(plat, client);
+	if (ret) {
+		dev_err(dev, "fail to reserve I2C bus\n");
+		return ret;
+	}
+
+	ret = anx7411_typec_switch_probe(plat, dev);
+	if (ret) {
+		dev_err(dev, "fail to probe typec switch\n");
+		goto free_i2c_dummy;
+	}
+
+	ret = anx7411_typec_port_probe(plat, dev);
+	if (ret) {
+		dev_err(dev, "fail to probe typec property.\n");
+		ret = -ENODEV;
+		goto free_typec_switch;
+	}
+
+	plat->intp_irq = client->irq;
+	if (!client->irq)
+		anx7411_get_gpio_irq(plat);
+
+	if (!plat->intp_irq) {
+		dev_err(dev, "fail to get interrupt IRQ\n");
+		ret = -EINVAL;
+		goto free_typec_port;
+	}
+
+	plat->dev = dev;
+	plat->psy_online = ANX7411_PSY_OFFLINE;
+	ret = anx7411_psy_register(plat);
+	if (ret) {
+		dev_err(dev, "register psy\n");
+		goto free_typec_port;
+	}
+
+	INIT_WORK(&plat->work, anx7411_work_func);
+	plat->workqueue = alloc_workqueue("anx7411_work",
+					  WQ_FREEZABLE |
+					  WQ_MEM_RECLAIM,
+					  1);
+	if (!plat->workqueue) {
+		dev_err(dev, "fail to create work queue\n");
+		ret = -ENOMEM;
+		goto free_typec_port;
+	}
+
+	ret = devm_request_threaded_irq(dev, plat->intp_irq,
+					NULL, anx7411_intr_isr,
+					IRQF_TRIGGER_FALLING |
+					IRQF_ONESHOT,
+					"anx7411-intp", plat);
+	if (ret) {
+		dev_err(dev, "fail to request irq\n");
+		goto free_wq;
+	}
+
+	if (anx7411_typec_check_connection(plat))
+		dev_err(dev, "check status\n");
+
+	pm_runtime_enable(dev);
+
+	return 0;
+
+free_wq:
+	destroy_workqueue(plat->workqueue);
+
+free_typec_port:
+	typec_unregister_port(plat->typec.port);
+	anx7411_port_unregister_altmodes(plat->typec.port_amode);
+
+free_typec_switch:
+	anx7411_unregister_switch(plat);
+	anx7411_unregister_mux(plat);
+
+free_i2c_dummy:
+	i2c_unregister_device(plat->spi_client);
+
+	return ret;
+}
+
+static void anx7411_i2c_remove(struct i2c_client *client)
+{
+	struct anx7411_data *plat = i2c_get_clientdata(client);
+
+	anx7411_partner_unregister_altmode(plat);
+	anx7411_unregister_partner(plat);
+
+	if (plat->workqueue)
+		destroy_workqueue(plat->workqueue);
+
+	if (plat->spi_client)
+		i2c_unregister_device(plat->spi_client);
+
+	if (plat->typec.role_sw)
+		usb_role_switch_put(plat->typec.role_sw);
+
+	anx7411_unregister_mux(plat);
+
+	anx7411_unregister_switch(plat);
+
+	if (plat->typec.port)
+		typec_unregister_port(plat->typec.port);
+
+	anx7411_port_unregister_altmodes(plat->typec.port_amode);
+}
+
+static const struct i2c_device_id anx7411_id[] = {
+	{"anx7411", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, anx7411_id);
+
+static const struct of_device_id anx_match_table[] = {
+	{.compatible = "analogix,anx7411",},
+	{},
+};
+
+static struct i2c_driver anx7411_driver = {
+	.driver = {
+		.name = "anx7411",
+		.of_match_table = anx_match_table,
+		.pm = &anx7411_pm_ops,
+	},
+	.probe = anx7411_i2c_probe,
+	.remove = anx7411_i2c_remove,
+
+	.id_table = anx7411_id,
+};
+
+module_i2c_driver(anx7411_driver);
+
+MODULE_DESCRIPTION("Anx7411 USB Type-C PD driver");
+MODULE_AUTHOR("Xin Ji <xji@analogixsemi.com>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1.5");
diff --git a/drivers/usb/typec/bus.c b/drivers/usb/typec/bus.c
new file mode 100644
index 000000000..69442a813
--- /dev/null
+++ b/drivers/usb/typec/bus.c
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Bus for USB Type-C Alternate Modes
+ *
+ * Copyright (C) 2018 Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/usb/pd_vdo.h>
+
+#include "bus.h"
+#include "class.h"
+#include "mux.h"
+
+static inline int
+typec_altmode_set_mux(struct altmode *alt, unsigned long conf, void *data)
+{
+	struct typec_mux_state state;
+
+	if (!alt->mux)
+		return 0;
+
+	state.alt = &alt->adev;
+	state.mode = conf;
+	state.data = data;
+
+	return typec_mux_set(alt->mux, &state);
+}
+
+static int typec_altmode_set_state(struct typec_altmode *adev,
+				   unsigned long conf, void *data)
+{
+	bool is_port = is_typec_port(adev->dev.parent);
+	struct altmode *port_altmode;
+
+	port_altmode = is_port ? to_altmode(adev) : to_altmode(adev)->partner;
+
+	return typec_altmode_set_mux(port_altmode, conf, data);
+}
+
+/* -------------------------------------------------------------------------- */
+/* Common API */
+
+/**
+ * typec_altmode_notify - Communication between the OS and alternate mode driver
+ * @adev: Handle to the alternate mode
+ * @conf: Alternate mode specific configuration value
+ * @data: Alternate mode specific data
+ *
+ * The primary purpose for this function is to allow the alternate mode drivers
+ * to tell which pin configuration has been negotiated with the partner. That
+ * information will then be used for example to configure the muxes.
+ * Communication to the other direction is also possible, and low level device
+ * drivers can also send notifications to the alternate mode drivers. The actual
+ * communication will be specific for every SVID.
+ */
+int typec_altmode_notify(struct typec_altmode *adev,
+			 unsigned long conf, void *data)
+{
+	bool is_port;
+	struct altmode *altmode;
+	struct altmode *partner;
+	int ret;
+
+	if (!adev)
+		return 0;
+
+	altmode = to_altmode(adev);
+
+	if (!altmode->partner)
+		return -ENODEV;
+
+	is_port = is_typec_port(adev->dev.parent);
+	partner = altmode->partner;
+
+	ret = typec_altmode_set_mux(is_port ? altmode : partner, conf, data);
+	if (ret)
+		return ret;
+
+	if (partner->adev.ops && partner->adev.ops->notify)
+		return partner->adev.ops->notify(&partner->adev, conf, data);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(typec_altmode_notify);
+
+/**
+ * typec_altmode_enter - Enter Mode
+ * @adev: The alternate mode
+ * @vdo: VDO for the Enter Mode command
+ *
+ * The alternate mode drivers use this function to enter mode. The port drivers
+ * use this to inform the alternate mode drivers that the partner has initiated
+ * Enter Mode command. If the alternate mode does not require VDO, @vdo must be
+ * NULL.
+ */
+int typec_altmode_enter(struct typec_altmode *adev, u32 *vdo)
+{
+	struct altmode *partner = to_altmode(adev)->partner;
+	struct typec_altmode *pdev = &partner->adev;
+	int ret;
+
+	if (!adev || adev->active)
+		return 0;
+
+	if (!pdev->ops || !pdev->ops->enter)
+		return -EOPNOTSUPP;
+
+	if (is_typec_port(pdev->dev.parent) && !pdev->active)
+		return -EPERM;
+
+	/* Moving to USB Safe State */
+	ret = typec_altmode_set_state(adev, TYPEC_STATE_SAFE, NULL);
+	if (ret)
+		return ret;
+
+	/* Enter Mode */
+	return pdev->ops->enter(pdev, vdo);
+}
+EXPORT_SYMBOL_GPL(typec_altmode_enter);
+
+/**
+ * typec_altmode_exit - Exit Mode
+ * @adev: The alternate mode
+ *
+ * The partner of @adev has initiated Exit Mode command.
+ */
+int typec_altmode_exit(struct typec_altmode *adev)
+{
+	struct altmode *partner = to_altmode(adev)->partner;
+	struct typec_altmode *pdev = &partner->adev;
+	int ret;
+
+	if (!adev || !adev->active)
+		return 0;
+
+	if (!pdev->ops || !pdev->ops->exit)
+		return -EOPNOTSUPP;
+
+	/* Moving to USB Safe State */
+	ret = typec_altmode_set_state(adev, TYPEC_STATE_SAFE, NULL);
+	if (ret)
+		return ret;
+
+	/* Exit Mode command */
+	return pdev->ops->exit(pdev);
+}
+EXPORT_SYMBOL_GPL(typec_altmode_exit);
+
+/**
+ * typec_altmode_attention - Attention command
+ * @adev: The alternate mode
+ * @vdo: VDO for the Attention command
+ *
+ * Notifies the partner of @adev about Attention command.
+ */
+int typec_altmode_attention(struct typec_altmode *adev, u32 vdo)
+{
+	struct altmode *partner = to_altmode(adev)->partner;
+	struct typec_altmode *pdev;
+
+	if (!partner)
+		return -ENODEV;
+
+	pdev = &partner->adev;
+
+	if (pdev->ops && pdev->ops->attention)
+		pdev->ops->attention(pdev, vdo);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(typec_altmode_attention);
+
+/**
+ * typec_altmode_vdm - Send Vendor Defined Messages (VDM) to the partner
+ * @adev: Alternate mode handle
+ * @header: VDM Header
+ * @vdo: Array of Vendor Defined Data Objects
+ * @count: Number of Data Objects
+ *
+ * The alternate mode drivers use this function for SVID specific communication
+ * with the partner. The port drivers use it to deliver the Structured VDMs
+ * received from the partners to the alternate mode drivers.
+ */
+int typec_altmode_vdm(struct typec_altmode *adev,
+		      const u32 header, const u32 *vdo, int count)
+{
+	struct typec_altmode *pdev;
+	struct altmode *altmode;
+
+	if (!adev)
+		return 0;
+
+	altmode = to_altmode(adev);
+
+	if (!altmode->partner)
+		return -ENODEV;
+
+	pdev = &altmode->partner->adev;
+
+	if (!pdev->ops || !pdev->ops->vdm)
+		return -EOPNOTSUPP;
+
+	return pdev->ops->vdm(pdev, header, vdo, count);
+}
+EXPORT_SYMBOL_GPL(typec_altmode_vdm);
+
+const struct typec_altmode *
+typec_altmode_get_partner(struct typec_altmode *adev)
+{
+	if (!adev || !to_altmode(adev)->partner)
+		return NULL;
+
+	return &to_altmode(adev)->partner->adev;
+}
+EXPORT_SYMBOL_GPL(typec_altmode_get_partner);
+
+/* -------------------------------------------------------------------------- */
+/* API for the alternate mode drivers */
+
+/**
+ * typec_altmode_get_plug - Find cable plug alternate mode
+ * @adev: Handle to partner alternate mode
+ * @index: Cable plug index
+ *
+ * Increment reference count for cable plug alternate mode device. Returns
+ * handle to the cable plug alternate mode, or NULL if none is found.
+ */
+struct typec_altmode *typec_altmode_get_plug(struct typec_altmode *adev,
+					     enum typec_plug_index index)
+{
+	struct altmode *port = to_altmode(adev)->partner;
+
+	if (port->plug[index]) {
+		get_device(&port->plug[index]->adev.dev);
+		return &port->plug[index]->adev;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(typec_altmode_get_plug);
+
+/**
+ * typec_altmode_put_plug - Decrement cable plug alternate mode reference count
+ * @plug: Handle to the cable plug alternate mode
+ */
+void typec_altmode_put_plug(struct typec_altmode *plug)
+{
+	if (plug)
+		put_device(&plug->dev);
+}
+EXPORT_SYMBOL_GPL(typec_altmode_put_plug);
+
+int __typec_altmode_register_driver(struct typec_altmode_driver *drv,
+				    struct module *module)
+{
+	if (!drv->probe)
+		return -EINVAL;
+
+	drv->driver.owner = module;
+	drv->driver.bus = &typec_bus;
+
+	return driver_register(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(__typec_altmode_register_driver);
+
+void typec_altmode_unregister_driver(struct typec_altmode_driver *drv)
+{
+	driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(typec_altmode_unregister_driver);
+
+/* -------------------------------------------------------------------------- */
+/* API for the port drivers */
+
+/**
+ * typec_match_altmode - Match SVID and mode to an array of alternate modes
+ * @altmodes: Array of alternate modes
+ * @n: Number of elements in the array, or -1 for NULL terminated arrays
+ * @svid: Standard or Vendor ID to match with
+ * @mode: Mode to match with
+ *
+ * Return pointer to an alternate mode with SVID matching @svid, or NULL when no
+ * match is found.
+ */
+struct typec_altmode *typec_match_altmode(struct typec_altmode **altmodes,
+					  size_t n, u16 svid, u8 mode)
+{
+	int i;
+
+	for (i = 0; i < n; i++) {
+		if (!altmodes[i])
+			break;
+		if (altmodes[i]->svid == svid && altmodes[i]->mode == mode)
+			return altmodes[i];
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(typec_match_altmode);
+
+/* -------------------------------------------------------------------------- */
+
+static ssize_t
+description_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct typec_altmode *alt = to_typec_altmode(dev);
+
+	return sprintf(buf, "%s\n", alt->desc ? alt->desc : "");
+}
+static DEVICE_ATTR_RO(description);
+
+static struct attribute *typec_attrs[] = {
+	&dev_attr_description.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(typec);
+
+static int typec_match(struct device *dev, struct device_driver *driver)
+{
+	struct typec_altmode_driver *drv = to_altmode_driver(driver);
+	struct typec_altmode *altmode = to_typec_altmode(dev);
+	const struct typec_device_id *id;
+
+	for (id = drv->id_table; id->svid; id++)
+		if (id->svid == altmode->svid &&
+		    (id->mode == TYPEC_ANY_MODE || id->mode == altmode->mode))
+			return 1;
+	return 0;
+}
+
+static int typec_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct typec_altmode *altmode = to_typec_altmode(dev);
+
+	if (add_uevent_var(env, "SVID=%04X", altmode->svid))
+		return -ENOMEM;
+
+	if (add_uevent_var(env, "MODE=%u", altmode->mode))
+		return -ENOMEM;
+
+	return add_uevent_var(env, "MODALIAS=typec:id%04Xm%02X",
+			      altmode->svid, altmode->mode);
+}
+
+static int typec_altmode_create_links(struct altmode *alt)
+{
+	struct device *port_dev = &alt->partner->adev.dev;
+	struct device *dev = &alt->adev.dev;
+	int err;
+
+	err = sysfs_create_link(&dev->kobj, &port_dev->kobj, "port");
+	if (err)
+		return err;
+
+	err = sysfs_create_link(&port_dev->kobj, &dev->kobj, "partner");
+	if (err)
+		sysfs_remove_link(&dev->kobj, "port");
+
+	return err;
+}
+
+static void typec_altmode_remove_links(struct altmode *alt)
+{
+	sysfs_remove_link(&alt->partner->adev.dev.kobj, "partner");
+	sysfs_remove_link(&alt->adev.dev.kobj, "port");
+}
+
+static int typec_probe(struct device *dev)
+{
+	struct typec_altmode_driver *drv = to_altmode_driver(dev->driver);
+	struct typec_altmode *adev = to_typec_altmode(dev);
+	struct altmode *altmode = to_altmode(adev);
+	int ret;
+
+	/* Fail if the port does not support the alternate mode */
+	if (!altmode->partner)
+		return -ENODEV;
+
+	ret = typec_altmode_create_links(altmode);
+	if (ret) {
+		dev_warn(dev, "failed to create symlinks\n");
+		return ret;
+	}
+
+	ret = drv->probe(adev);
+	if (ret)
+		typec_altmode_remove_links(altmode);
+
+	return ret;
+}
+
+static void typec_remove(struct device *dev)
+{
+	struct typec_altmode_driver *drv = to_altmode_driver(dev->driver);
+	struct typec_altmode *adev = to_typec_altmode(dev);
+	struct altmode *altmode = to_altmode(adev);
+
+	typec_altmode_remove_links(altmode);
+
+	if (drv->remove)
+		drv->remove(to_typec_altmode(dev));
+
+	if (adev->active) {
+		WARN_ON(typec_altmode_set_state(adev, TYPEC_STATE_SAFE, NULL));
+		typec_altmode_update_active(adev, false);
+	}
+
+	adev->desc = NULL;
+	adev->ops = NULL;
+}
+
+struct bus_type typec_bus = {
+	.name = "typec",
+	.dev_groups = typec_groups,
+	.match = typec_match,
+	.uevent = typec_uevent,
+	.probe = typec_probe,
+	.remove = typec_remove,
+};
diff --git a/drivers/usb/typec/bus.h b/drivers/usb/typec/bus.h
new file mode 100644
index 000000000..56dec268d
--- /dev/null
+++ b/drivers/usb/typec/bus.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __USB_TYPEC_ALTMODE_H__
+#define __USB_TYPEC_ALTMODE_H__
+
+#include <linux/usb/typec_altmode.h>
+
+struct bus_type;
+struct typec_mux;
+
+struct altmode {
+	unsigned int			id;
+	struct typec_altmode		adev;
+	struct typec_mux		*mux;
+
+	enum typec_port_data		roles;
+
+	struct attribute		*attrs[5];
+	char				group_name[8];
+	struct attribute_group		group;
+	const struct attribute_group	*groups[2];
+
+	struct altmode			*partner;
+	struct altmode			*plug[2];
+};
+
+#define to_altmode(d) container_of(d, struct altmode, adev)
+
+extern struct bus_type typec_bus;
+extern const struct device_type typec_altmode_dev_type;
+
+#define is_typec_altmode(_dev_) (_dev_->type == &typec_altmode_dev_type)
+
+#endif /* __USB_TYPEC_ALTMODE_H__ */
diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
new file mode 100644
index 000000000..3da404d51
--- /dev/null
+++ b/drivers/usb/typec/class.c
@@ -0,0 +1,2359 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Type-C Connector Class
+ *
+ * Copyright (C) 2017, Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/usb/pd_vdo.h>
+#include <linux/usb/typec_mux.h>
+#include <linux/usb/typec_retimer.h>
+
+#include "bus.h"
+#include "class.h"
+#include "pd.h"
+
+static DEFINE_IDA(typec_index_ida);
+
+struct class typec_class = {
+	.name = "typec",
+	.owner = THIS_MODULE,
+};
+
+/* ------------------------------------------------------------------------- */
+/* Common attributes */
+
+static const char * const typec_accessory_modes[] = {
+	[TYPEC_ACCESSORY_NONE]		= "none",
+	[TYPEC_ACCESSORY_AUDIO]		= "analog_audio",
+	[TYPEC_ACCESSORY_DEBUG]		= "debug",
+};
+
+/* Product types defined in USB PD Specification R3.0 V2.0 */
+static const char * const product_type_ufp[8] = {
+	[IDH_PTYPE_NOT_UFP]		= "not_ufp",
+	[IDH_PTYPE_HUB]			= "hub",
+	[IDH_PTYPE_PERIPH]		= "peripheral",
+	[IDH_PTYPE_PSD]			= "psd",
+	[IDH_PTYPE_AMA]			= "ama",
+};
+
+static const char * const product_type_dfp[8] = {
+	[IDH_PTYPE_NOT_DFP]		= "not_dfp",
+	[IDH_PTYPE_DFP_HUB]		= "hub",
+	[IDH_PTYPE_DFP_HOST]		= "host",
+	[IDH_PTYPE_DFP_PB]		= "power_brick",
+};
+
+static const char * const product_type_cable[8] = {
+	[IDH_PTYPE_NOT_CABLE]		= "not_cable",
+	[IDH_PTYPE_PCABLE]		= "passive",
+	[IDH_PTYPE_ACABLE]		= "active",
+	[IDH_PTYPE_VPD]			= "vpd",
+};
+
+static struct usb_pd_identity *get_pd_identity(struct device *dev)
+{
+	if (is_typec_partner(dev)) {
+		struct typec_partner *partner = to_typec_partner(dev);
+
+		return partner->identity;
+	} else if (is_typec_cable(dev)) {
+		struct typec_cable *cable = to_typec_cable(dev);
+
+		return cable->identity;
+	}
+	return NULL;
+}
+
+static const char *get_pd_product_type(struct device *dev)
+{
+	struct typec_port *port = to_typec_port(dev->parent);
+	struct usb_pd_identity *id = get_pd_identity(dev);
+	const char *ptype = NULL;
+
+	if (is_typec_partner(dev)) {
+		if (!id)
+			return NULL;
+
+		if (port->data_role == TYPEC_HOST)
+			ptype = product_type_ufp[PD_IDH_PTYPE(id->id_header)];
+		else
+			ptype = product_type_dfp[PD_IDH_DFP_PTYPE(id->id_header)];
+	} else if (is_typec_cable(dev)) {
+		if (id)
+			ptype = product_type_cable[PD_IDH_PTYPE(id->id_header)];
+		else
+			ptype = to_typec_cable(dev)->active ?
+				product_type_cable[IDH_PTYPE_ACABLE] :
+				product_type_cable[IDH_PTYPE_PCABLE];
+	}
+
+	return ptype;
+}
+
+static ssize_t id_header_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct usb_pd_identity *id = get_pd_identity(dev);
+
+	return sprintf(buf, "0x%08x\n", id->id_header);
+}
+static DEVICE_ATTR_RO(id_header);
+
+static ssize_t cert_stat_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct usb_pd_identity *id = get_pd_identity(dev);
+
+	return sprintf(buf, "0x%08x\n", id->cert_stat);
+}
+static DEVICE_ATTR_RO(cert_stat);
+
+static ssize_t product_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct usb_pd_identity *id = get_pd_identity(dev);
+
+	return sprintf(buf, "0x%08x\n", id->product);
+}
+static DEVICE_ATTR_RO(product);
+
+static ssize_t product_type_vdo1_show(struct device *dev, struct device_attribute *attr,
+				      char *buf)
+{
+	struct usb_pd_identity *id = get_pd_identity(dev);
+
+	return sysfs_emit(buf, "0x%08x\n", id->vdo[0]);
+}
+static DEVICE_ATTR_RO(product_type_vdo1);
+
+static ssize_t product_type_vdo2_show(struct device *dev, struct device_attribute *attr,
+				      char *buf)
+{
+	struct usb_pd_identity *id = get_pd_identity(dev);
+
+	return sysfs_emit(buf, "0x%08x\n", id->vdo[1]);
+}
+static DEVICE_ATTR_RO(product_type_vdo2);
+
+static ssize_t product_type_vdo3_show(struct device *dev, struct device_attribute *attr,
+				      char *buf)
+{
+	struct usb_pd_identity *id = get_pd_identity(dev);
+
+	return sysfs_emit(buf, "0x%08x\n", id->vdo[2]);
+}
+static DEVICE_ATTR_RO(product_type_vdo3);
+
+static struct attribute *usb_pd_id_attrs[] = {
+	&dev_attr_id_header.attr,
+	&dev_attr_cert_stat.attr,
+	&dev_attr_product.attr,
+	&dev_attr_product_type_vdo1.attr,
+	&dev_attr_product_type_vdo2.attr,
+	&dev_attr_product_type_vdo3.attr,
+	NULL
+};
+
+static const struct attribute_group usb_pd_id_group = {
+	.name = "identity",
+	.attrs = usb_pd_id_attrs,
+};
+
+static const struct attribute_group *usb_pd_id_groups[] = {
+	&usb_pd_id_group,
+	NULL,
+};
+
+static void typec_product_type_notify(struct device *dev)
+{
+	char *envp[2] = { };
+	const char *ptype;
+
+	ptype = get_pd_product_type(dev);
+	if (!ptype)
+		return;
+
+	sysfs_notify(&dev->kobj, NULL, "type");
+
+	envp[0] = kasprintf(GFP_KERNEL, "PRODUCT_TYPE=%s", ptype);
+	if (!envp[0])
+		return;
+
+	kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, envp);
+	kfree(envp[0]);
+}
+
+static void typec_report_identity(struct device *dev)
+{
+	sysfs_notify(&dev->kobj, "identity", "id_header");
+	sysfs_notify(&dev->kobj, "identity", "cert_stat");
+	sysfs_notify(&dev->kobj, "identity", "product");
+	sysfs_notify(&dev->kobj, "identity", "product_type_vdo1");
+	sysfs_notify(&dev->kobj, "identity", "product_type_vdo2");
+	sysfs_notify(&dev->kobj, "identity", "product_type_vdo3");
+	typec_product_type_notify(dev);
+}
+
+static ssize_t
+type_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	const char *ptype;
+
+	ptype = get_pd_product_type(dev);
+	if (!ptype)
+		return 0;
+
+	return sysfs_emit(buf, "%s\n", ptype);
+}
+static DEVICE_ATTR_RO(type);
+
+static ssize_t usb_power_delivery_revision_show(struct device *dev,
+						struct device_attribute *attr,
+						char *buf);
+static DEVICE_ATTR_RO(usb_power_delivery_revision);
+
+/* ------------------------------------------------------------------------- */
+/* Alternate Modes */
+
+static int altmode_match(struct device *dev, void *data)
+{
+	struct typec_altmode *adev = to_typec_altmode(dev);
+	struct typec_device_id *id = data;
+
+	if (!is_typec_altmode(dev))
+		return 0;
+
+	return ((adev->svid == id->svid) && (adev->mode == id->mode));
+}
+
+static void typec_altmode_set_partner(struct altmode *altmode)
+{
+	struct typec_altmode *adev = &altmode->adev;
+	struct typec_device_id id = { adev->svid, adev->mode, };
+	struct typec_port *port = typec_altmode2port(adev);
+	struct altmode *partner;
+	struct device *dev;
+
+	dev = device_find_child(&port->dev, &id, altmode_match);
+	if (!dev)
+		return;
+
+	/* Bind the port alt mode to the partner/plug alt mode. */
+	partner = to_altmode(to_typec_altmode(dev));
+	altmode->partner = partner;
+
+	/* Bind the partner/plug alt mode to the port alt mode. */
+	if (is_typec_plug(adev->dev.parent)) {
+		struct typec_plug *plug = to_typec_plug(adev->dev.parent);
+
+		partner->plug[plug->index] = altmode;
+	} else {
+		partner->partner = altmode;
+	}
+}
+
+static void typec_altmode_put_partner(struct altmode *altmode)
+{
+	struct altmode *partner = altmode->partner;
+	struct typec_altmode *adev;
+	struct typec_altmode *partner_adev;
+
+	if (!partner)
+		return;
+
+	adev = &altmode->adev;
+	partner_adev = &partner->adev;
+
+	if (is_typec_plug(adev->dev.parent)) {
+		struct typec_plug *plug = to_typec_plug(adev->dev.parent);
+
+		partner->plug[plug->index] = NULL;
+	} else {
+		partner->partner = NULL;
+	}
+	put_device(&partner_adev->dev);
+}
+
+/**
+ * typec_altmode_update_active - Report Enter/Exit mode
+ * @adev: Handle to the alternate mode
+ * @active: True when the mode has been entered
+ *
+ * If a partner or cable plug executes Enter/Exit Mode command successfully, the
+ * drivers use this routine to report the updated state of the mode.
+ */
+void typec_altmode_update_active(struct typec_altmode *adev, bool active)
+{
+	char dir[6];
+
+	if (adev->active == active)
+		return;
+
+	if (!is_typec_port(adev->dev.parent) && adev->dev.driver) {
+		if (!active)
+			module_put(adev->dev.driver->owner);
+		else
+			WARN_ON(!try_module_get(adev->dev.driver->owner));
+	}
+
+	adev->active = active;
+	snprintf(dir, sizeof(dir), "mode%d", adev->mode);
+	sysfs_notify(&adev->dev.kobj, dir, "active");
+	sysfs_notify(&adev->dev.kobj, NULL, "active");
+	kobject_uevent(&adev->dev.kobj, KOBJ_CHANGE);
+}
+EXPORT_SYMBOL_GPL(typec_altmode_update_active);
+
+/**
+ * typec_altmode2port - Alternate Mode to USB Type-C port
+ * @alt: The Alternate Mode
+ *
+ * Returns handle to the port that a cable plug or partner with @alt is
+ * connected to.
+ */
+struct typec_port *typec_altmode2port(struct typec_altmode *alt)
+{
+	if (is_typec_plug(alt->dev.parent))
+		return to_typec_port(alt->dev.parent->parent->parent);
+	if (is_typec_partner(alt->dev.parent))
+		return to_typec_port(alt->dev.parent->parent);
+	if (is_typec_port(alt->dev.parent))
+		return to_typec_port(alt->dev.parent);
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(typec_altmode2port);
+
+static ssize_t
+vdo_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct typec_altmode *alt = to_typec_altmode(dev);
+
+	return sprintf(buf, "0x%08x\n", alt->vdo);
+}
+static DEVICE_ATTR_RO(vdo);
+
+static ssize_t
+description_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct typec_altmode *alt = to_typec_altmode(dev);
+
+	return sprintf(buf, "%s\n", alt->desc ? alt->desc : "");
+}
+static DEVICE_ATTR_RO(description);
+
+static ssize_t
+active_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct typec_altmode *alt = to_typec_altmode(dev);
+
+	return sprintf(buf, "%s\n", alt->active ? "yes" : "no");
+}
+
+static ssize_t active_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t size)
+{
+	struct typec_altmode *adev = to_typec_altmode(dev);
+	struct altmode *altmode = to_altmode(adev);
+	bool enter;
+	int ret;
+
+	ret = kstrtobool(buf, &enter);
+	if (ret)
+		return ret;
+
+	if (adev->active == enter)
+		return size;
+
+	if (is_typec_port(adev->dev.parent)) {
+		typec_altmode_update_active(adev, enter);
+
+		/* Make sure that the partner exits the mode before disabling */
+		if (altmode->partner && !enter && altmode->partner->adev.active)
+			typec_altmode_exit(&altmode->partner->adev);
+	} else if (altmode->partner) {
+		if (enter && !altmode->partner->adev.active) {
+			dev_warn(dev, "port has the mode disabled\n");
+			return -EPERM;
+		}
+	}
+
+	/* Note: If there is no driver, the mode will not be entered */
+	if (adev->ops && adev->ops->activate) {
+		ret = adev->ops->activate(adev, enter);
+		if (ret)
+			return ret;
+	}
+
+	return size;
+}
+static DEVICE_ATTR_RW(active);
+
+static ssize_t
+supported_roles_show(struct device *dev, struct device_attribute *attr,
+		     char *buf)
+{
+	struct altmode *alt = to_altmode(to_typec_altmode(dev));
+	ssize_t ret;
+
+	switch (alt->roles) {
+	case TYPEC_PORT_SRC:
+		ret = sprintf(buf, "source\n");
+		break;
+	case TYPEC_PORT_SNK:
+		ret = sprintf(buf, "sink\n");
+		break;
+	case TYPEC_PORT_DRP:
+	default:
+		ret = sprintf(buf, "source sink\n");
+		break;
+	}
+	return ret;
+}
+static DEVICE_ATTR_RO(supported_roles);
+
+static ssize_t
+mode_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct typec_altmode *adev = to_typec_altmode(dev);
+
+	return sprintf(buf, "%u\n", adev->mode);
+}
+static DEVICE_ATTR_RO(mode);
+
+static ssize_t
+svid_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct typec_altmode *adev = to_typec_altmode(dev);
+
+	return sprintf(buf, "%04x\n", adev->svid);
+}
+static DEVICE_ATTR_RO(svid);
+
+static struct attribute *typec_altmode_attrs[] = {
+	&dev_attr_active.attr,
+	&dev_attr_mode.attr,
+	&dev_attr_svid.attr,
+	&dev_attr_vdo.attr,
+	NULL
+};
+
+static umode_t typec_altmode_attr_is_visible(struct kobject *kobj,
+					     struct attribute *attr, int n)
+{
+	struct typec_altmode *adev = to_typec_altmode(kobj_to_dev(kobj));
+
+	if (attr == &dev_attr_active.attr)
+		if (!adev->ops || !adev->ops->activate)
+			return 0444;
+
+	return attr->mode;
+}
+
+static const struct attribute_group typec_altmode_group = {
+	.is_visible = typec_altmode_attr_is_visible,
+	.attrs = typec_altmode_attrs,
+};
+
+static const struct attribute_group *typec_altmode_groups[] = {
+	&typec_altmode_group,
+	NULL
+};
+
+static int altmode_id_get(struct device *dev)
+{
+	struct ida *ids;
+
+	if (is_typec_partner(dev))
+		ids = &to_typec_partner(dev)->mode_ids;
+	else if (is_typec_plug(dev))
+		ids = &to_typec_plug(dev)->mode_ids;
+	else
+		ids = &to_typec_port(dev)->mode_ids;
+
+	return ida_simple_get(ids, 0, 0, GFP_KERNEL);
+}
+
+static void altmode_id_remove(struct device *dev, int id)
+{
+	struct ida *ids;
+
+	if (is_typec_partner(dev))
+		ids = &to_typec_partner(dev)->mode_ids;
+	else if (is_typec_plug(dev))
+		ids = &to_typec_plug(dev)->mode_ids;
+	else
+		ids = &to_typec_port(dev)->mode_ids;
+
+	ida_simple_remove(ids, id);
+}
+
+static void typec_altmode_release(struct device *dev)
+{
+	struct altmode *alt = to_altmode(to_typec_altmode(dev));
+
+	if (!is_typec_port(dev->parent))
+		typec_altmode_put_partner(alt);
+
+	altmode_id_remove(alt->adev.dev.parent, alt->id);
+	kfree(alt);
+}
+
+const struct device_type typec_altmode_dev_type = {
+	.name = "typec_alternate_mode",
+	.groups = typec_altmode_groups,
+	.release = typec_altmode_release,
+};
+
+static struct typec_altmode *
+typec_register_altmode(struct device *parent,
+		       const struct typec_altmode_desc *desc)
+{
+	unsigned int id = altmode_id_get(parent);
+	bool is_port = is_typec_port(parent);
+	struct altmode *alt;
+	int ret;
+
+	alt = kzalloc(sizeof(*alt), GFP_KERNEL);
+	if (!alt) {
+		altmode_id_remove(parent, id);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	alt->adev.svid = desc->svid;
+	alt->adev.mode = desc->mode;
+	alt->adev.vdo = desc->vdo;
+	alt->roles = desc->roles;
+	alt->id = id;
+
+	alt->attrs[0] = &dev_attr_vdo.attr;
+	alt->attrs[1] = &dev_attr_description.attr;
+	alt->attrs[2] = &dev_attr_active.attr;
+
+	if (is_port) {
+		alt->attrs[3] = &dev_attr_supported_roles.attr;
+		alt->adev.active = true; /* Enabled by default */
+	}
+
+	sprintf(alt->group_name, "mode%d", desc->mode);
+	alt->group.name = alt->group_name;
+	alt->group.attrs = alt->attrs;
+	alt->groups[0] = &alt->group;
+
+	alt->adev.dev.parent = parent;
+	alt->adev.dev.groups = alt->groups;
+	alt->adev.dev.type = &typec_altmode_dev_type;
+	dev_set_name(&alt->adev.dev, "%s.%u", dev_name(parent), id);
+
+	/* Link partners and plugs with the ports */
+	if (!is_port)
+		typec_altmode_set_partner(alt);
+
+	/* The partners are bind to drivers */
+	if (is_typec_partner(parent))
+		alt->adev.dev.bus = &typec_bus;
+
+	/* Plug alt modes need a class to generate udev events. */
+	if (is_typec_plug(parent))
+		alt->adev.dev.class = &typec_class;
+
+	ret = device_register(&alt->adev.dev);
+	if (ret) {
+		dev_err(parent, "failed to register alternate mode (%d)\n",
+			ret);
+		put_device(&alt->adev.dev);
+		return ERR_PTR(ret);
+	}
+
+	return &alt->adev;
+}
+
+/**
+ * typec_unregister_altmode - Unregister Alternate Mode
+ * @adev: The alternate mode to be unregistered
+ *
+ * Unregister device created with typec_partner_register_altmode(),
+ * typec_plug_register_altmode() or typec_port_register_altmode().
+ */
+void typec_unregister_altmode(struct typec_altmode *adev)
+{
+	if (IS_ERR_OR_NULL(adev))
+		return;
+	typec_mux_put(to_altmode(adev)->mux);
+	device_unregister(&adev->dev);
+}
+EXPORT_SYMBOL_GPL(typec_unregister_altmode);
+
+/* ------------------------------------------------------------------------- */
+/* Type-C Partners */
+
+static ssize_t accessory_mode_show(struct device *dev,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	struct typec_partner *p = to_typec_partner(dev);
+
+	return sprintf(buf, "%s\n", typec_accessory_modes[p->accessory]);
+}
+static DEVICE_ATTR_RO(accessory_mode);
+
+static ssize_t supports_usb_power_delivery_show(struct device *dev,
+						struct device_attribute *attr,
+						char *buf)
+{
+	struct typec_partner *p = to_typec_partner(dev);
+
+	return sprintf(buf, "%s\n", p->usb_pd ? "yes" : "no");
+}
+static DEVICE_ATTR_RO(supports_usb_power_delivery);
+
+static ssize_t number_of_alternate_modes_show(struct device *dev, struct device_attribute *attr,
+					      char *buf)
+{
+	struct typec_partner *partner;
+	struct typec_plug *plug;
+	int num_altmodes;
+
+	if (is_typec_partner(dev)) {
+		partner = to_typec_partner(dev);
+		num_altmodes = partner->num_altmodes;
+	} else if (is_typec_plug(dev)) {
+		plug = to_typec_plug(dev);
+		num_altmodes = plug->num_altmodes;
+	} else {
+		return 0;
+	}
+
+	return sysfs_emit(buf, "%d\n", num_altmodes);
+}
+static DEVICE_ATTR_RO(number_of_alternate_modes);
+
+static struct attribute *typec_partner_attrs[] = {
+	&dev_attr_accessory_mode.attr,
+	&dev_attr_supports_usb_power_delivery.attr,
+	&dev_attr_number_of_alternate_modes.attr,
+	&dev_attr_type.attr,
+	&dev_attr_usb_power_delivery_revision.attr,
+	NULL
+};
+
+static umode_t typec_partner_attr_is_visible(struct kobject *kobj, struct attribute *attr, int n)
+{
+	struct typec_partner *partner = to_typec_partner(kobj_to_dev(kobj));
+
+	if (attr == &dev_attr_number_of_alternate_modes.attr) {
+		if (partner->num_altmodes < 0)
+			return 0;
+	}
+
+	if (attr == &dev_attr_type.attr)
+		if (!get_pd_product_type(kobj_to_dev(kobj)))
+			return 0;
+
+	return attr->mode;
+}
+
+static const struct attribute_group typec_partner_group = {
+	.is_visible = typec_partner_attr_is_visible,
+	.attrs = typec_partner_attrs
+};
+
+static const struct attribute_group *typec_partner_groups[] = {
+	&typec_partner_group,
+	NULL
+};
+
+static void typec_partner_release(struct device *dev)
+{
+	struct typec_partner *partner = to_typec_partner(dev);
+
+	ida_destroy(&partner->mode_ids);
+	kfree(partner);
+}
+
+const struct device_type typec_partner_dev_type = {
+	.name = "typec_partner",
+	.groups = typec_partner_groups,
+	.release = typec_partner_release,
+};
+
+/**
+ * typec_partner_set_identity - Report result from Discover Identity command
+ * @partner: The partner updated identity values
+ *
+ * This routine is used to report that the result of Discover Identity USB power
+ * delivery command has become available.
+ */
+int typec_partner_set_identity(struct typec_partner *partner)
+{
+	if (!partner->identity)
+		return -EINVAL;
+
+	typec_report_identity(&partner->dev);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(typec_partner_set_identity);
+
+/**
+ * typec_partner_set_pd_revision - Set the PD revision supported by the partner
+ * @partner: The partner to be updated.
+ * @pd_revision:  USB Power Delivery Specification Revision supported by partner
+ *
+ * This routine is used to report that the PD revision of the port partner has
+ * become available.
+ */
+void typec_partner_set_pd_revision(struct typec_partner *partner, u16 pd_revision)
+{
+	if (partner->pd_revision == pd_revision)
+		return;
+
+	partner->pd_revision = pd_revision;
+	sysfs_notify(&partner->dev.kobj, NULL, "usb_power_delivery_revision");
+	if (pd_revision != 0 && !partner->usb_pd) {
+		partner->usb_pd = 1;
+		sysfs_notify(&partner->dev.kobj, NULL,
+			     "supports_usb_power_delivery");
+	}
+	kobject_uevent(&partner->dev.kobj, KOBJ_CHANGE);
+}
+EXPORT_SYMBOL_GPL(typec_partner_set_pd_revision);
+
+/**
+ * typec_partner_set_usb_power_delivery - Declare USB Power Delivery Contract.
+ * @partner: The partner device.
+ * @pd: The USB PD instance.
+ *
+ * This routine can be used to declare USB Power Delivery Contract with @partner
+ * by linking @partner to @pd which contains the objects that were used during the
+ * negotiation of the contract.
+ *
+ * If @pd is NULL, the link is removed and the contract with @partner has ended.
+ */
+int typec_partner_set_usb_power_delivery(struct typec_partner *partner,
+					 struct usb_power_delivery *pd)
+{
+	int ret;
+
+	if (IS_ERR_OR_NULL(partner) || partner->pd == pd)
+		return 0;
+
+	if (pd) {
+		ret = usb_power_delivery_link_device(pd, &partner->dev);
+		if (ret)
+			return ret;
+	} else {
+		usb_power_delivery_unlink_device(partner->pd, &partner->dev);
+	}
+
+	partner->pd = pd;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(typec_partner_set_usb_power_delivery);
+
+/**
+ * typec_partner_set_num_altmodes - Set the number of available partner altmodes
+ * @partner: The partner to be updated.
+ * @num_altmodes: The number of altmodes we want to specify as available.
+ *
+ * This routine is used to report the number of alternate modes supported by the
+ * partner. This value is *not* enforced in alternate mode registration routines.
+ *
+ * @partner.num_altmodes is set to -1 on partner registration, denoting that
+ * a valid value has not been set for it yet.
+ *
+ * Returns 0 on success or negative error number on failure.
+ */
+int typec_partner_set_num_altmodes(struct typec_partner *partner, int num_altmodes)
+{
+	int ret;
+
+	if (num_altmodes < 0)
+		return -EINVAL;
+
+	partner->num_altmodes = num_altmodes;
+	ret = sysfs_update_group(&partner->dev.kobj, &typec_partner_group);
+	if (ret < 0)
+		return ret;
+
+	sysfs_notify(&partner->dev.kobj, NULL, "number_of_alternate_modes");
+	kobject_uevent(&partner->dev.kobj, KOBJ_CHANGE);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(typec_partner_set_num_altmodes);
+
+/**
+ * typec_partner_register_altmode - Register USB Type-C Partner Alternate Mode
+ * @partner: USB Type-C Partner that supports the alternate mode
+ * @desc: Description of the alternate mode
+ *
+ * This routine is used to register each alternate mode individually that
+ * @partner has listed in response to Discover SVIDs command. The modes for a
+ * SVID listed in response to Discover Modes command need to be listed in an
+ * array in @desc.
+ *
+ * Returns handle to the alternate mode on success or ERR_PTR on failure.
+ */
+struct typec_altmode *
+typec_partner_register_altmode(struct typec_partner *partner,
+			       const struct typec_altmode_desc *desc)
+{
+	return typec_register_altmode(&partner->dev, desc);
+}
+EXPORT_SYMBOL_GPL(typec_partner_register_altmode);
+
+/**
+ * typec_partner_set_svdm_version - Set negotiated Structured VDM (SVDM) Version
+ * @partner: USB Type-C Partner that supports SVDM
+ * @svdm_version: Negotiated SVDM Version
+ *
+ * This routine is used to save the negotiated SVDM Version.
+ */
+void typec_partner_set_svdm_version(struct typec_partner *partner,
+				   enum usb_pd_svdm_ver svdm_version)
+{
+	partner->svdm_version = svdm_version;
+}
+EXPORT_SYMBOL_GPL(typec_partner_set_svdm_version);
+
+/**
+ * typec_register_partner - Register a USB Type-C Partner
+ * @port: The USB Type-C Port the partner is connected to
+ * @desc: Description of the partner
+ *
+ * Registers a device for USB Type-C Partner described in @desc.
+ *
+ * Returns handle to the partner on success or ERR_PTR on failure.
+ */
+struct typec_partner *typec_register_partner(struct typec_port *port,
+					     struct typec_partner_desc *desc)
+{
+	struct typec_partner *partner;
+	int ret;
+
+	partner = kzalloc(sizeof(*partner), GFP_KERNEL);
+	if (!partner)
+		return ERR_PTR(-ENOMEM);
+
+	ida_init(&partner->mode_ids);
+	partner->usb_pd = desc->usb_pd;
+	partner->accessory = desc->accessory;
+	partner->num_altmodes = -1;
+	partner->pd_revision = desc->pd_revision;
+	partner->svdm_version = port->cap->svdm_version;
+
+	if (desc->identity) {
+		/*
+		 * Creating directory for the identity only if the driver is
+		 * able to provide data to it.
+		 */
+		partner->dev.groups = usb_pd_id_groups;
+		partner->identity = desc->identity;
+	}
+
+	partner->dev.class = &typec_class;
+	partner->dev.parent = &port->dev;
+	partner->dev.type = &typec_partner_dev_type;
+	dev_set_name(&partner->dev, "%s-partner", dev_name(&port->dev));
+
+	ret = device_register(&partner->dev);
+	if (ret) {
+		dev_err(&port->dev, "failed to register partner (%d)\n", ret);
+		put_device(&partner->dev);
+		return ERR_PTR(ret);
+	}
+
+	return partner;
+}
+EXPORT_SYMBOL_GPL(typec_register_partner);
+
+/**
+ * typec_unregister_partner - Unregister a USB Type-C Partner
+ * @partner: The partner to be unregistered
+ *
+ * Unregister device created with typec_register_partner().
+ */
+void typec_unregister_partner(struct typec_partner *partner)
+{
+	if (!IS_ERR_OR_NULL(partner))
+		device_unregister(&partner->dev);
+}
+EXPORT_SYMBOL_GPL(typec_unregister_partner);
+
+/* ------------------------------------------------------------------------- */
+/* Type-C Cable Plugs */
+
+static void typec_plug_release(struct device *dev)
+{
+	struct typec_plug *plug = to_typec_plug(dev);
+
+	ida_destroy(&plug->mode_ids);
+	kfree(plug);
+}
+
+static struct attribute *typec_plug_attrs[] = {
+	&dev_attr_number_of_alternate_modes.attr,
+	NULL
+};
+
+static umode_t typec_plug_attr_is_visible(struct kobject *kobj, struct attribute *attr, int n)
+{
+	struct typec_plug *plug = to_typec_plug(kobj_to_dev(kobj));
+
+	if (attr == &dev_attr_number_of_alternate_modes.attr) {
+		if (plug->num_altmodes < 0)
+			return 0;
+	}
+
+	return attr->mode;
+}
+
+static const struct attribute_group typec_plug_group = {
+	.is_visible = typec_plug_attr_is_visible,
+	.attrs = typec_plug_attrs
+};
+
+static const struct attribute_group *typec_plug_groups[] = {
+	&typec_plug_group,
+	NULL
+};
+
+const struct device_type typec_plug_dev_type = {
+	.name = "typec_plug",
+	.groups = typec_plug_groups,
+	.release = typec_plug_release,
+};
+
+/**
+ * typec_plug_set_num_altmodes - Set the number of available plug altmodes
+ * @plug: The plug to be updated.
+ * @num_altmodes: The number of altmodes we want to specify as available.
+ *
+ * This routine is used to report the number of alternate modes supported by the
+ * plug. This value is *not* enforced in alternate mode registration routines.
+ *
+ * @plug.num_altmodes is set to -1 on plug registration, denoting that
+ * a valid value has not been set for it yet.
+ *
+ * Returns 0 on success or negative error number on failure.
+ */
+int typec_plug_set_num_altmodes(struct typec_plug *plug, int num_altmodes)
+{
+	int ret;
+
+	if (num_altmodes < 0)
+		return -EINVAL;
+
+	plug->num_altmodes = num_altmodes;
+	ret = sysfs_update_group(&plug->dev.kobj, &typec_plug_group);
+	if (ret < 0)
+		return ret;
+
+	sysfs_notify(&plug->dev.kobj, NULL, "number_of_alternate_modes");
+	kobject_uevent(&plug->dev.kobj, KOBJ_CHANGE);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(typec_plug_set_num_altmodes);
+
+/**
+ * typec_plug_register_altmode - Register USB Type-C Cable Plug Alternate Mode
+ * @plug: USB Type-C Cable Plug that supports the alternate mode
+ * @desc: Description of the alternate mode
+ *
+ * This routine is used to register each alternate mode individually that @plug
+ * has listed in response to Discover SVIDs command. The modes for a SVID that
+ * the plug lists in response to Discover Modes command need to be listed in an
+ * array in @desc.
+ *
+ * Returns handle to the alternate mode on success or ERR_PTR on failure.
+ */
+struct typec_altmode *
+typec_plug_register_altmode(struct typec_plug *plug,
+			    const struct typec_altmode_desc *desc)
+{
+	return typec_register_altmode(&plug->dev, desc);
+}
+EXPORT_SYMBOL_GPL(typec_plug_register_altmode);
+
+/**
+ * typec_register_plug - Register a USB Type-C Cable Plug
+ * @cable: USB Type-C Cable with the plug
+ * @desc: Description of the cable plug
+ *
+ * Registers a device for USB Type-C Cable Plug described in @desc. A USB Type-C
+ * Cable Plug represents a plug with electronics in it that can response to USB
+ * Power Delivery SOP Prime or SOP Double Prime packages.
+ *
+ * Returns handle to the cable plug on success or ERR_PTR on failure.
+ */
+struct typec_plug *typec_register_plug(struct typec_cable *cable,
+				       struct typec_plug_desc *desc)
+{
+	struct typec_plug *plug;
+	char name[8];
+	int ret;
+
+	plug = kzalloc(sizeof(*plug), GFP_KERNEL);
+	if (!plug)
+		return ERR_PTR(-ENOMEM);
+
+	sprintf(name, "plug%d", desc->index);
+
+	ida_init(&plug->mode_ids);
+	plug->num_altmodes = -1;
+	plug->index = desc->index;
+	plug->dev.class = &typec_class;
+	plug->dev.parent = &cable->dev;
+	plug->dev.type = &typec_plug_dev_type;
+	dev_set_name(&plug->dev, "%s-%s", dev_name(cable->dev.parent), name);
+
+	ret = device_register(&plug->dev);
+	if (ret) {
+		dev_err(&cable->dev, "failed to register plug (%d)\n", ret);
+		put_device(&plug->dev);
+		return ERR_PTR(ret);
+	}
+
+	return plug;
+}
+EXPORT_SYMBOL_GPL(typec_register_plug);
+
+/**
+ * typec_unregister_plug - Unregister a USB Type-C Cable Plug
+ * @plug: The cable plug to be unregistered
+ *
+ * Unregister device created with typec_register_plug().
+ */
+void typec_unregister_plug(struct typec_plug *plug)
+{
+	if (!IS_ERR_OR_NULL(plug))
+		device_unregister(&plug->dev);
+}
+EXPORT_SYMBOL_GPL(typec_unregister_plug);
+
+/* Type-C Cables */
+
+static const char * const typec_plug_types[] = {
+	[USB_PLUG_NONE]		= "unknown",
+	[USB_PLUG_TYPE_A]	= "type-a",
+	[USB_PLUG_TYPE_B]	= "type-b",
+	[USB_PLUG_TYPE_C]	= "type-c",
+	[USB_PLUG_CAPTIVE]	= "captive",
+};
+
+static ssize_t plug_type_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct typec_cable *cable = to_typec_cable(dev);
+
+	return sprintf(buf, "%s\n", typec_plug_types[cable->type]);
+}
+static DEVICE_ATTR_RO(plug_type);
+
+static struct attribute *typec_cable_attrs[] = {
+	&dev_attr_type.attr,
+	&dev_attr_plug_type.attr,
+	&dev_attr_usb_power_delivery_revision.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(typec_cable);
+
+static void typec_cable_release(struct device *dev)
+{
+	struct typec_cable *cable = to_typec_cable(dev);
+
+	kfree(cable);
+}
+
+const struct device_type typec_cable_dev_type = {
+	.name = "typec_cable",
+	.groups = typec_cable_groups,
+	.release = typec_cable_release,
+};
+
+static int cable_match(struct device *dev, void *data)
+{
+	return is_typec_cable(dev);
+}
+
+/**
+ * typec_cable_get - Get a reference to the USB Type-C cable
+ * @port: The USB Type-C Port the cable is connected to
+ *
+ * The caller must decrement the reference count with typec_cable_put() after
+ * use.
+ */
+struct typec_cable *typec_cable_get(struct typec_port *port)
+{
+	struct device *dev;
+
+	dev = device_find_child(&port->dev, NULL, cable_match);
+	if (!dev)
+		return NULL;
+
+	return to_typec_cable(dev);
+}
+EXPORT_SYMBOL_GPL(typec_cable_get);
+
+/**
+ * typec_cable_put - Decrement the reference count on USB Type-C cable
+ * @cable: The USB Type-C cable
+ */
+void typec_cable_put(struct typec_cable *cable)
+{
+	put_device(&cable->dev);
+}
+EXPORT_SYMBOL_GPL(typec_cable_put);
+
+/**
+ * typec_cable_is_active - Check is the USB Type-C cable active or passive
+ * @cable: The USB Type-C Cable
+ *
+ * Return 1 if the cable is active or 0 if it's passive.
+ */
+int typec_cable_is_active(struct typec_cable *cable)
+{
+	return cable->active;
+}
+EXPORT_SYMBOL_GPL(typec_cable_is_active);
+
+/**
+ * typec_cable_set_identity - Report result from Discover Identity command
+ * @cable: The cable updated identity values
+ *
+ * This routine is used to report that the result of Discover Identity USB power
+ * delivery command has become available.
+ */
+int typec_cable_set_identity(struct typec_cable *cable)
+{
+	if (!cable->identity)
+		return -EINVAL;
+
+	typec_report_identity(&cable->dev);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(typec_cable_set_identity);
+
+/**
+ * typec_register_cable - Register a USB Type-C Cable
+ * @port: The USB Type-C Port the cable is connected to
+ * @desc: Description of the cable
+ *
+ * Registers a device for USB Type-C Cable described in @desc. The cable will be
+ * parent for the optional cable plug devises.
+ *
+ * Returns handle to the cable on success or ERR_PTR on failure.
+ */
+struct typec_cable *typec_register_cable(struct typec_port *port,
+					 struct typec_cable_desc *desc)
+{
+	struct typec_cable *cable;
+	int ret;
+
+	cable = kzalloc(sizeof(*cable), GFP_KERNEL);
+	if (!cable)
+		return ERR_PTR(-ENOMEM);
+
+	cable->type = desc->type;
+	cable->active = desc->active;
+	cable->pd_revision = desc->pd_revision;
+
+	if (desc->identity) {
+		/*
+		 * Creating directory for the identity only if the driver is
+		 * able to provide data to it.
+		 */
+		cable->dev.groups = usb_pd_id_groups;
+		cable->identity = desc->identity;
+	}
+
+	cable->dev.class = &typec_class;
+	cable->dev.parent = &port->dev;
+	cable->dev.type = &typec_cable_dev_type;
+	dev_set_name(&cable->dev, "%s-cable", dev_name(&port->dev));
+
+	ret = device_register(&cable->dev);
+	if (ret) {
+		dev_err(&port->dev, "failed to register cable (%d)\n", ret);
+		put_device(&cable->dev);
+		return ERR_PTR(ret);
+	}
+
+	return cable;
+}
+EXPORT_SYMBOL_GPL(typec_register_cable);
+
+/**
+ * typec_unregister_cable - Unregister a USB Type-C Cable
+ * @cable: The cable to be unregistered
+ *
+ * Unregister device created with typec_register_cable().
+ */
+void typec_unregister_cable(struct typec_cable *cable)
+{
+	if (!IS_ERR_OR_NULL(cable))
+		device_unregister(&cable->dev);
+}
+EXPORT_SYMBOL_GPL(typec_unregister_cable);
+
+/* ------------------------------------------------------------------------- */
+/* USB Type-C ports */
+
+/**
+ * typec_port_set_usb_power_delivery - Assign USB PD for port.
+ * @port: USB Type-C port.
+ * @pd: USB PD instance.
+ *
+ * This routine can be used to set the USB Power Delivery Capabilities for @port
+ * that it will advertise to the partner.
+ *
+ * If @pd is NULL, the assignment is removed.
+ */
+int typec_port_set_usb_power_delivery(struct typec_port *port, struct usb_power_delivery *pd)
+{
+	int ret;
+
+	if (IS_ERR_OR_NULL(port) || port->pd == pd)
+		return 0;
+
+	if (pd) {
+		ret = usb_power_delivery_link_device(pd, &port->dev);
+		if (ret)
+			return ret;
+	} else {
+		usb_power_delivery_unlink_device(port->pd, &port->dev);
+	}
+
+	port->pd = pd;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(typec_port_set_usb_power_delivery);
+
+static ssize_t select_usb_power_delivery_store(struct device *dev,
+					       struct device_attribute *attr,
+					       const char *buf, size_t size)
+{
+	struct typec_port *port = to_typec_port(dev);
+	struct usb_power_delivery *pd;
+
+	if (!port->ops || !port->ops->pd_set)
+		return -EOPNOTSUPP;
+
+	pd = usb_power_delivery_find(buf);
+	if (!pd)
+		return -EINVAL;
+
+	return port->ops->pd_set(port, pd);
+}
+
+static ssize_t select_usb_power_delivery_show(struct device *dev,
+					      struct device_attribute *attr, char *buf)
+{
+	struct typec_port *port = to_typec_port(dev);
+	struct usb_power_delivery **pds;
+	int i, ret = 0;
+
+	if (!port->ops || !port->ops->pd_get)
+		return -EOPNOTSUPP;
+
+	pds = port->ops->pd_get(port);
+	if (!pds)
+		return 0;
+
+	for (i = 0; pds[i]; i++) {
+		if (pds[i] == port->pd)
+			ret += sysfs_emit_at(buf, ret, "[%s] ", dev_name(&pds[i]->dev));
+		else
+			ret += sysfs_emit_at(buf, ret, "%s ", dev_name(&pds[i]->dev));
+	}
+
+	buf[ret - 1] = '\n';
+
+	return ret;
+}
+static DEVICE_ATTR_RW(select_usb_power_delivery);
+
+static struct attribute *port_attrs[] = {
+	&dev_attr_select_usb_power_delivery.attr,
+	NULL
+};
+
+static umode_t port_attr_is_visible(struct kobject *kobj, struct attribute *attr, int n)
+{
+	struct typec_port *port = to_typec_port(kobj_to_dev(kobj));
+
+	if (!port->pd || !port->ops || !port->ops->pd_get)
+		return 0;
+	if (!port->ops->pd_set)
+		return 0444;
+
+	return attr->mode;
+}
+
+static const struct attribute_group pd_group = {
+	.is_visible = port_attr_is_visible,
+	.attrs = port_attrs,
+};
+
+static const char * const typec_orientations[] = {
+	[TYPEC_ORIENTATION_NONE]	= "unknown",
+	[TYPEC_ORIENTATION_NORMAL]	= "normal",
+	[TYPEC_ORIENTATION_REVERSE]	= "reverse",
+};
+
+static const char * const typec_roles[] = {
+	[TYPEC_SINK]	= "sink",
+	[TYPEC_SOURCE]	= "source",
+};
+
+static const char * const typec_data_roles[] = {
+	[TYPEC_DEVICE]	= "device",
+	[TYPEC_HOST]	= "host",
+};
+
+static const char * const typec_port_power_roles[] = {
+	[TYPEC_PORT_SRC] = "source",
+	[TYPEC_PORT_SNK] = "sink",
+	[TYPEC_PORT_DRP] = "dual",
+};
+
+static const char * const typec_port_data_roles[] = {
+	[TYPEC_PORT_DFP] = "host",
+	[TYPEC_PORT_UFP] = "device",
+	[TYPEC_PORT_DRD] = "dual",
+};
+
+static const char * const typec_port_types_drp[] = {
+	[TYPEC_PORT_SRC] = "dual [source] sink",
+	[TYPEC_PORT_SNK] = "dual source [sink]",
+	[TYPEC_PORT_DRP] = "[dual] source sink",
+};
+
+static ssize_t
+preferred_role_store(struct device *dev, struct device_attribute *attr,
+		     const char *buf, size_t size)
+{
+	struct typec_port *port = to_typec_port(dev);
+	int role;
+	int ret;
+
+	if (port->cap->type != TYPEC_PORT_DRP) {
+		dev_dbg(dev, "Preferred role only supported with DRP ports\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (!port->ops || !port->ops->try_role) {
+		dev_dbg(dev, "Setting preferred role not supported\n");
+		return -EOPNOTSUPP;
+	}
+
+	role = sysfs_match_string(typec_roles, buf);
+	if (role < 0) {
+		if (sysfs_streq(buf, "none"))
+			role = TYPEC_NO_PREFERRED_ROLE;
+		else
+			return -EINVAL;
+	}
+
+	ret = port->ops->try_role(port, role);
+	if (ret)
+		return ret;
+
+	port->prefer_role = role;
+	return size;
+}
+
+static ssize_t
+preferred_role_show(struct device *dev, struct device_attribute *attr,
+		    char *buf)
+{
+	struct typec_port *port = to_typec_port(dev);
+
+	if (port->cap->type != TYPEC_PORT_DRP)
+		return 0;
+
+	if (port->prefer_role < 0)
+		return 0;
+
+	return sprintf(buf, "%s\n", typec_roles[port->prefer_role]);
+}
+static DEVICE_ATTR_RW(preferred_role);
+
+static ssize_t data_role_store(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t size)
+{
+	struct typec_port *port = to_typec_port(dev);
+	int ret;
+
+	if (!port->ops || !port->ops->dr_set) {
+		dev_dbg(dev, "data role swapping not supported\n");
+		return -EOPNOTSUPP;
+	}
+
+	ret = sysfs_match_string(typec_data_roles, buf);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&port->port_type_lock);
+	if (port->cap->data != TYPEC_PORT_DRD) {
+		ret = -EOPNOTSUPP;
+		goto unlock_and_ret;
+	}
+
+	ret = port->ops->dr_set(port, ret);
+	if (ret)
+		goto unlock_and_ret;
+
+	ret = size;
+unlock_and_ret:
+	mutex_unlock(&port->port_type_lock);
+	return ret;
+}
+
+static ssize_t data_role_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct typec_port *port = to_typec_port(dev);
+
+	if (port->cap->data == TYPEC_PORT_DRD)
+		return sprintf(buf, "%s\n", port->data_role == TYPEC_HOST ?
+			       "[host] device" : "host [device]");
+
+	return sprintf(buf, "[%s]\n", typec_data_roles[port->data_role]);
+}
+static DEVICE_ATTR_RW(data_role);
+
+static ssize_t power_role_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t size)
+{
+	struct typec_port *port = to_typec_port(dev);
+	int ret;
+
+	if (!port->ops || !port->ops->pr_set) {
+		dev_dbg(dev, "power role swapping not supported\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (port->pwr_opmode != TYPEC_PWR_MODE_PD) {
+		dev_dbg(dev, "partner unable to swap power role\n");
+		return -EIO;
+	}
+
+	ret = sysfs_match_string(typec_roles, buf);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&port->port_type_lock);
+	if (port->port_type != TYPEC_PORT_DRP) {
+		dev_dbg(dev, "port type fixed at \"%s\"",
+			     typec_port_power_roles[port->port_type]);
+		ret = -EOPNOTSUPP;
+		goto unlock_and_ret;
+	}
+
+	ret = port->ops->pr_set(port, ret);
+	if (ret)
+		goto unlock_and_ret;
+
+	ret = size;
+unlock_and_ret:
+	mutex_unlock(&port->port_type_lock);
+	return ret;
+}
+
+static ssize_t power_role_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct typec_port *port = to_typec_port(dev);
+
+	if (port->cap->type == TYPEC_PORT_DRP)
+		return sprintf(buf, "%s\n", port->pwr_role == TYPEC_SOURCE ?
+			       "[source] sink" : "source [sink]");
+
+	return sprintf(buf, "[%s]\n", typec_roles[port->pwr_role]);
+}
+static DEVICE_ATTR_RW(power_role);
+
+static ssize_t
+port_type_store(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t size)
+{
+	struct typec_port *port = to_typec_port(dev);
+	int ret;
+	enum typec_port_type type;
+
+	if (port->cap->type != TYPEC_PORT_DRP ||
+	    !port->ops || !port->ops->port_type_set) {
+		dev_dbg(dev, "changing port type not supported\n");
+		return -EOPNOTSUPP;
+	}
+
+	ret = sysfs_match_string(typec_port_power_roles, buf);
+	if (ret < 0)
+		return ret;
+
+	type = ret;
+	mutex_lock(&port->port_type_lock);
+
+	if (port->port_type == type) {
+		ret = size;
+		goto unlock_and_ret;
+	}
+
+	ret = port->ops->port_type_set(port, type);
+	if (ret)
+		goto unlock_and_ret;
+
+	port->port_type = type;
+	ret = size;
+
+unlock_and_ret:
+	mutex_unlock(&port->port_type_lock);
+	return ret;
+}
+
+static ssize_t
+port_type_show(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct typec_port *port = to_typec_port(dev);
+
+	if (port->cap->type == TYPEC_PORT_DRP)
+		return sprintf(buf, "%s\n",
+			       typec_port_types_drp[port->port_type]);
+
+	return sprintf(buf, "[%s]\n", typec_port_power_roles[port->cap->type]);
+}
+static DEVICE_ATTR_RW(port_type);
+
+static const char * const typec_pwr_opmodes[] = {
+	[TYPEC_PWR_MODE_USB]	= "default",
+	[TYPEC_PWR_MODE_1_5A]	= "1.5A",
+	[TYPEC_PWR_MODE_3_0A]	= "3.0A",
+	[TYPEC_PWR_MODE_PD]	= "usb_power_delivery",
+};
+
+static ssize_t power_operation_mode_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct typec_port *port = to_typec_port(dev);
+
+	return sprintf(buf, "%s\n", typec_pwr_opmodes[port->pwr_opmode]);
+}
+static DEVICE_ATTR_RO(power_operation_mode);
+
+static ssize_t vconn_source_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t size)
+{
+	struct typec_port *port = to_typec_port(dev);
+	bool source;
+	int ret;
+
+	if (!port->cap->pd_revision) {
+		dev_dbg(dev, "VCONN swap depends on USB Power Delivery\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (!port->ops || !port->ops->vconn_set) {
+		dev_dbg(dev, "VCONN swapping not supported\n");
+		return -EOPNOTSUPP;
+	}
+
+	ret = kstrtobool(buf, &source);
+	if (ret)
+		return ret;
+
+	ret = port->ops->vconn_set(port, (enum typec_role)source);
+	if (ret)
+		return ret;
+
+	return size;
+}
+
+static ssize_t vconn_source_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct typec_port *port = to_typec_port(dev);
+
+	return sprintf(buf, "%s\n",
+		       port->vconn_role == TYPEC_SOURCE ? "yes" : "no");
+}
+static DEVICE_ATTR_RW(vconn_source);
+
+static ssize_t supported_accessory_modes_show(struct device *dev,
+					      struct device_attribute *attr,
+					      char *buf)
+{
+	struct typec_port *port = to_typec_port(dev);
+	ssize_t ret = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(port->cap->accessory); i++) {
+		if (port->cap->accessory[i])
+			ret += sprintf(buf + ret, "%s ",
+			       typec_accessory_modes[port->cap->accessory[i]]);
+	}
+
+	if (!ret)
+		return sprintf(buf, "none\n");
+
+	buf[ret - 1] = '\n';
+
+	return ret;
+}
+static DEVICE_ATTR_RO(supported_accessory_modes);
+
+static ssize_t usb_typec_revision_show(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	struct typec_port *port = to_typec_port(dev);
+	u16 rev = port->cap->revision;
+
+	return sprintf(buf, "%d.%d\n", (rev >> 8) & 0xff, (rev >> 4) & 0xf);
+}
+static DEVICE_ATTR_RO(usb_typec_revision);
+
+static ssize_t usb_power_delivery_revision_show(struct device *dev,
+						struct device_attribute *attr,
+						char *buf)
+{
+	u16 rev = 0;
+
+	if (is_typec_partner(dev)) {
+		struct typec_partner *partner = to_typec_partner(dev);
+
+		rev = partner->pd_revision;
+	} else if (is_typec_cable(dev)) {
+		struct typec_cable *cable = to_typec_cable(dev);
+
+		rev = cable->pd_revision;
+	} else if (is_typec_port(dev)) {
+		struct typec_port *p = to_typec_port(dev);
+
+		rev = p->cap->pd_revision;
+	}
+	return sysfs_emit(buf, "%d.%d\n", (rev >> 8) & 0xff, (rev >> 4) & 0xf);
+}
+
+static ssize_t orientation_show(struct device *dev,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	struct typec_port *port = to_typec_port(dev);
+
+	return sprintf(buf, "%s\n", typec_orientations[port->orientation]);
+}
+static DEVICE_ATTR_RO(orientation);
+
+static struct attribute *typec_attrs[] = {
+	&dev_attr_data_role.attr,
+	&dev_attr_power_operation_mode.attr,
+	&dev_attr_power_role.attr,
+	&dev_attr_preferred_role.attr,
+	&dev_attr_supported_accessory_modes.attr,
+	&dev_attr_usb_power_delivery_revision.attr,
+	&dev_attr_usb_typec_revision.attr,
+	&dev_attr_vconn_source.attr,
+	&dev_attr_port_type.attr,
+	&dev_attr_orientation.attr,
+	NULL,
+};
+
+static umode_t typec_attr_is_visible(struct kobject *kobj,
+				     struct attribute *attr, int n)
+{
+	struct typec_port *port = to_typec_port(kobj_to_dev(kobj));
+
+	if (attr == &dev_attr_data_role.attr) {
+		if (port->cap->data != TYPEC_PORT_DRD ||
+		    !port->ops || !port->ops->dr_set)
+			return 0444;
+	} else if (attr == &dev_attr_power_role.attr) {
+		if (port->cap->type != TYPEC_PORT_DRP ||
+		    !port->ops || !port->ops->pr_set)
+			return 0444;
+	} else if (attr == &dev_attr_vconn_source.attr) {
+		if (!port->cap->pd_revision ||
+		    !port->ops || !port->ops->vconn_set)
+			return 0444;
+	} else if (attr == &dev_attr_preferred_role.attr) {
+		if (port->cap->type != TYPEC_PORT_DRP ||
+		    !port->ops || !port->ops->try_role)
+			return 0444;
+	} else if (attr == &dev_attr_port_type.attr) {
+		if (!port->ops || !port->ops->port_type_set)
+			return 0;
+		if (port->cap->type != TYPEC_PORT_DRP)
+			return 0444;
+	} else if (attr == &dev_attr_orientation.attr) {
+		if (port->cap->orientation_aware)
+			return 0444;
+		return 0;
+	}
+
+	return attr->mode;
+}
+
+static const struct attribute_group typec_group = {
+	.is_visible = typec_attr_is_visible,
+	.attrs = typec_attrs,
+};
+
+static const struct attribute_group *typec_groups[] = {
+	&typec_group,
+	&pd_group,
+	NULL
+};
+
+static int typec_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	int ret;
+
+	ret = add_uevent_var(env, "TYPEC_PORT=%s", dev_name(dev));
+	if (ret)
+		dev_err(dev, "failed to add uevent TYPEC_PORT\n");
+
+	return ret;
+}
+
+static void typec_release(struct device *dev)
+{
+	struct typec_port *port = to_typec_port(dev);
+
+	ida_simple_remove(&typec_index_ida, port->id);
+	ida_destroy(&port->mode_ids);
+	typec_switch_put(port->sw);
+	typec_mux_put(port->mux);
+	typec_retimer_put(port->retimer);
+	kfree(port->cap);
+	kfree(port);
+}
+
+const struct device_type typec_port_dev_type = {
+	.name = "typec_port",
+	.groups = typec_groups,
+	.uevent = typec_uevent,
+	.release = typec_release,
+};
+
+/* --------------------------------------- */
+/* Driver callbacks to report role updates */
+
+static int partner_match(struct device *dev, void *data)
+{
+	return is_typec_partner(dev);
+}
+
+/**
+ * typec_set_data_role - Report data role change
+ * @port: The USB Type-C Port where the role was changed
+ * @role: The new data role
+ *
+ * This routine is used by the port drivers to report data role changes.
+ */
+void typec_set_data_role(struct typec_port *port, enum typec_data_role role)
+{
+	struct device *partner_dev;
+
+	if (port->data_role == role)
+		return;
+
+	port->data_role = role;
+	sysfs_notify(&port->dev.kobj, NULL, "data_role");
+	kobject_uevent(&port->dev.kobj, KOBJ_CHANGE);
+
+	partner_dev = device_find_child(&port->dev, NULL, partner_match);
+	if (!partner_dev)
+		return;
+
+	if (to_typec_partner(partner_dev)->identity)
+		typec_product_type_notify(partner_dev);
+
+	put_device(partner_dev);
+}
+EXPORT_SYMBOL_GPL(typec_set_data_role);
+
+/**
+ * typec_set_pwr_role - Report power role change
+ * @port: The USB Type-C Port where the role was changed
+ * @role: The new data role
+ *
+ * This routine is used by the port drivers to report power role changes.
+ */
+void typec_set_pwr_role(struct typec_port *port, enum typec_role role)
+{
+	if (port->pwr_role == role)
+		return;
+
+	port->pwr_role = role;
+	sysfs_notify(&port->dev.kobj, NULL, "power_role");
+	kobject_uevent(&port->dev.kobj, KOBJ_CHANGE);
+}
+EXPORT_SYMBOL_GPL(typec_set_pwr_role);
+
+/**
+ * typec_set_vconn_role - Report VCONN source change
+ * @port: The USB Type-C Port which VCONN role changed
+ * @role: Source when @port is sourcing VCONN, or Sink when it's not
+ *
+ * This routine is used by the port drivers to report if the VCONN source is
+ * changes.
+ */
+void typec_set_vconn_role(struct typec_port *port, enum typec_role role)
+{
+	if (port->vconn_role == role)
+		return;
+
+	port->vconn_role = role;
+	sysfs_notify(&port->dev.kobj, NULL, "vconn_source");
+	kobject_uevent(&port->dev.kobj, KOBJ_CHANGE);
+}
+EXPORT_SYMBOL_GPL(typec_set_vconn_role);
+
+/**
+ * typec_set_pwr_opmode - Report changed power operation mode
+ * @port: The USB Type-C Port where the mode was changed
+ * @opmode: New power operation mode
+ *
+ * This routine is used by the port drivers to report changed power operation
+ * mode in @port. The modes are USB (default), 1.5A, 3.0A as defined in USB
+ * Type-C specification, and "USB Power Delivery" when the power levels are
+ * negotiated with methods defined in USB Power Delivery specification.
+ */
+void typec_set_pwr_opmode(struct typec_port *port,
+			  enum typec_pwr_opmode opmode)
+{
+	struct device *partner_dev;
+
+	if (port->pwr_opmode == opmode)
+		return;
+
+	port->pwr_opmode = opmode;
+	sysfs_notify(&port->dev.kobj, NULL, "power_operation_mode");
+	kobject_uevent(&port->dev.kobj, KOBJ_CHANGE);
+
+	partner_dev = device_find_child(&port->dev, NULL, partner_match);
+	if (partner_dev) {
+		struct typec_partner *partner = to_typec_partner(partner_dev);
+
+		if (opmode == TYPEC_PWR_MODE_PD && !partner->usb_pd) {
+			partner->usb_pd = 1;
+			sysfs_notify(&partner_dev->kobj, NULL,
+				     "supports_usb_power_delivery");
+			kobject_uevent(&partner_dev->kobj, KOBJ_CHANGE);
+		}
+		put_device(partner_dev);
+	}
+}
+EXPORT_SYMBOL_GPL(typec_set_pwr_opmode);
+
+/**
+ * typec_find_pwr_opmode - Get the typec power operation mode capability
+ * @name: power operation mode string
+ *
+ * This routine is used to find the typec_pwr_opmode by its string @name.
+ *
+ * Returns typec_pwr_opmode if success, otherwise negative error code.
+ */
+int typec_find_pwr_opmode(const char *name)
+{
+	return match_string(typec_pwr_opmodes,
+			    ARRAY_SIZE(typec_pwr_opmodes), name);
+}
+EXPORT_SYMBOL_GPL(typec_find_pwr_opmode);
+
+/**
+ * typec_find_orientation - Convert orientation string to enum typec_orientation
+ * @name: Orientation string
+ *
+ * This routine is used to find the typec_orientation by its string name @name.
+ *
+ * Returns the orientation value on success, otherwise negative error code.
+ */
+int typec_find_orientation(const char *name)
+{
+	return match_string(typec_orientations, ARRAY_SIZE(typec_orientations),
+			    name);
+}
+EXPORT_SYMBOL_GPL(typec_find_orientation);
+
+/**
+ * typec_find_port_power_role - Get the typec port power capability
+ * @name: port power capability string
+ *
+ * This routine is used to find the typec_port_type by its string name.
+ *
+ * Returns typec_port_type if success, otherwise negative error code.
+ */
+int typec_find_port_power_role(const char *name)
+{
+	return match_string(typec_port_power_roles,
+			    ARRAY_SIZE(typec_port_power_roles), name);
+}
+EXPORT_SYMBOL_GPL(typec_find_port_power_role);
+
+/**
+ * typec_find_power_role - Find the typec one specific power role
+ * @name: power role string
+ *
+ * This routine is used to find the typec_role by its string name.
+ *
+ * Returns typec_role if success, otherwise negative error code.
+ */
+int typec_find_power_role(const char *name)
+{
+	return match_string(typec_roles, ARRAY_SIZE(typec_roles), name);
+}
+EXPORT_SYMBOL_GPL(typec_find_power_role);
+
+/**
+ * typec_find_port_data_role - Get the typec port data capability
+ * @name: port data capability string
+ *
+ * This routine is used to find the typec_port_data by its string name.
+ *
+ * Returns typec_port_data if success, otherwise negative error code.
+ */
+int typec_find_port_data_role(const char *name)
+{
+	return match_string(typec_port_data_roles,
+			    ARRAY_SIZE(typec_port_data_roles), name);
+}
+EXPORT_SYMBOL_GPL(typec_find_port_data_role);
+
+/* ------------------------------------------ */
+/* API for Multiplexer/DeMultiplexer Switches */
+
+/**
+ * typec_set_orientation - Set USB Type-C cable plug orientation
+ * @port: USB Type-C Port
+ * @orientation: USB Type-C cable plug orientation
+ *
+ * Set cable plug orientation for @port.
+ */
+int typec_set_orientation(struct typec_port *port,
+			  enum typec_orientation orientation)
+{
+	int ret;
+
+	ret = typec_switch_set(port->sw, orientation);
+	if (ret)
+		return ret;
+
+	port->orientation = orientation;
+	sysfs_notify(&port->dev.kobj, NULL, "orientation");
+	kobject_uevent(&port->dev.kobj, KOBJ_CHANGE);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(typec_set_orientation);
+
+/**
+ * typec_get_orientation - Get USB Type-C cable plug orientation
+ * @port: USB Type-C Port
+ *
+ * Get current cable plug orientation for @port.
+ */
+enum typec_orientation typec_get_orientation(struct typec_port *port)
+{
+	return port->orientation;
+}
+EXPORT_SYMBOL_GPL(typec_get_orientation);
+
+/**
+ * typec_set_mode - Set mode of operation for USB Type-C connector
+ * @port: USB Type-C connector
+ * @mode: Accessory Mode, USB Operation or Safe State
+ *
+ * Configure @port for Accessory Mode @mode. This function will configure the
+ * muxes needed for @mode.
+ */
+int typec_set_mode(struct typec_port *port, int mode)
+{
+	struct typec_mux_state state = { };
+
+	state.mode = mode;
+
+	return typec_mux_set(port->mux, &state);
+}
+EXPORT_SYMBOL_GPL(typec_set_mode);
+
+/* --------------------------------------- */
+
+/**
+ * typec_get_negotiated_svdm_version - Get negotiated SVDM Version
+ * @port: USB Type-C Port.
+ *
+ * Get the negotiated SVDM Version. The Version is set to the port default
+ * value stored in typec_capability on partner registration, and updated after
+ * a successful Discover Identity if the negotiated value is less than the
+ * default value.
+ *
+ * Returns usb_pd_svdm_ver if the partner has been registered otherwise -ENODEV.
+ */
+int typec_get_negotiated_svdm_version(struct typec_port *port)
+{
+	enum usb_pd_svdm_ver svdm_version;
+	struct device *partner_dev;
+
+	partner_dev = device_find_child(&port->dev, NULL, partner_match);
+	if (!partner_dev)
+		return -ENODEV;
+
+	svdm_version = to_typec_partner(partner_dev)->svdm_version;
+	put_device(partner_dev);
+
+	return svdm_version;
+}
+EXPORT_SYMBOL_GPL(typec_get_negotiated_svdm_version);
+
+/**
+ * typec_get_drvdata - Return private driver data pointer
+ * @port: USB Type-C port
+ */
+void *typec_get_drvdata(struct typec_port *port)
+{
+	return dev_get_drvdata(&port->dev);
+}
+EXPORT_SYMBOL_GPL(typec_get_drvdata);
+
+int typec_get_fw_cap(struct typec_capability *cap,
+		     struct fwnode_handle *fwnode)
+{
+	const char *cap_str;
+	int ret;
+
+	cap->fwnode = fwnode;
+
+	ret = fwnode_property_read_string(fwnode, "power-role", &cap_str);
+	if (ret < 0)
+		return ret;
+
+	ret = typec_find_port_power_role(cap_str);
+	if (ret < 0)
+		return ret;
+	cap->type = ret;
+
+	/* USB data support is optional */
+	ret = fwnode_property_read_string(fwnode, "data-role", &cap_str);
+	if (ret == 0) {
+		ret = typec_find_port_data_role(cap_str);
+		if (ret < 0)
+			return ret;
+		cap->data = ret;
+	}
+
+	/* Get the preferred power role for a DRP */
+	if (cap->type == TYPEC_PORT_DRP) {
+		cap->prefer_role = TYPEC_NO_PREFERRED_ROLE;
+
+		ret = fwnode_property_read_string(fwnode, "try-power-role", &cap_str);
+		if (ret == 0) {
+			ret = typec_find_power_role(cap_str);
+			if (ret < 0)
+				return ret;
+			cap->prefer_role = ret;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(typec_get_fw_cap);
+
+/**
+ * typec_port_register_altmode - Register USB Type-C Port Alternate Mode
+ * @port: USB Type-C Port that supports the alternate mode
+ * @desc: Description of the alternate mode
+ *
+ * This routine is used to register an alternate mode that @port is capable of
+ * supporting.
+ *
+ * Returns handle to the alternate mode on success or ERR_PTR on failure.
+ */
+struct typec_altmode *
+typec_port_register_altmode(struct typec_port *port,
+			    const struct typec_altmode_desc *desc)
+{
+	struct typec_altmode *adev;
+	struct typec_mux *mux;
+
+	mux = typec_mux_get(&port->dev, desc);
+	if (IS_ERR(mux))
+		return ERR_CAST(mux);
+
+	adev = typec_register_altmode(&port->dev, desc);
+	if (IS_ERR(adev))
+		typec_mux_put(mux);
+	else
+		to_altmode(adev)->mux = mux;
+
+	return adev;
+}
+EXPORT_SYMBOL_GPL(typec_port_register_altmode);
+
+void typec_port_register_altmodes(struct typec_port *port,
+	const struct typec_altmode_ops *ops, void *drvdata,
+	struct typec_altmode **altmodes, size_t n)
+{
+	struct fwnode_handle *altmodes_node, *child;
+	struct typec_altmode_desc desc;
+	struct typec_altmode *alt;
+	size_t index = 0;
+	u32 svid, vdo;
+	int ret;
+
+	altmodes_node = device_get_named_child_node(&port->dev, "altmodes");
+	if (!altmodes_node)
+		return; /* No altmodes specified */
+
+	fwnode_for_each_child_node(altmodes_node, child) {
+		ret = fwnode_property_read_u32(child, "svid", &svid);
+		if (ret) {
+			dev_err(&port->dev, "Error reading svid for altmode %s\n",
+				fwnode_get_name(child));
+			continue;
+		}
+
+		ret = fwnode_property_read_u32(child, "vdo", &vdo);
+		if (ret) {
+			dev_err(&port->dev, "Error reading vdo for altmode %s\n",
+				fwnode_get_name(child));
+			continue;
+		}
+
+		if (index >= n) {
+			dev_err(&port->dev, "Error not enough space for altmode %s\n",
+				fwnode_get_name(child));
+			continue;
+		}
+
+		desc.svid = svid;
+		desc.vdo = vdo;
+		desc.mode = index + 1;
+		alt = typec_port_register_altmode(port, &desc);
+		if (IS_ERR(alt)) {
+			dev_err(&port->dev, "Error registering altmode %s\n",
+				fwnode_get_name(child));
+			continue;
+		}
+
+		alt->ops = ops;
+		typec_altmode_set_drvdata(alt, drvdata);
+		altmodes[index] = alt;
+		index++;
+	}
+}
+EXPORT_SYMBOL_GPL(typec_port_register_altmodes);
+
+/**
+ * typec_register_port - Register a USB Type-C Port
+ * @parent: Parent device
+ * @cap: Description of the port
+ *
+ * Registers a device for USB Type-C Port described in @cap.
+ *
+ * Returns handle to the port on success or ERR_PTR on failure.
+ */
+struct typec_port *typec_register_port(struct device *parent,
+				       const struct typec_capability *cap)
+{
+	struct typec_port *port;
+	int ret;
+	int id;
+
+	port = kzalloc(sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return ERR_PTR(-ENOMEM);
+
+	id = ida_simple_get(&typec_index_ida, 0, 0, GFP_KERNEL);
+	if (id < 0) {
+		kfree(port);
+		return ERR_PTR(id);
+	}
+
+	switch (cap->type) {
+	case TYPEC_PORT_SRC:
+		port->pwr_role = TYPEC_SOURCE;
+		port->vconn_role = TYPEC_SOURCE;
+		break;
+	case TYPEC_PORT_SNK:
+		port->pwr_role = TYPEC_SINK;
+		port->vconn_role = TYPEC_SINK;
+		break;
+	case TYPEC_PORT_DRP:
+		if (cap->prefer_role != TYPEC_NO_PREFERRED_ROLE)
+			port->pwr_role = cap->prefer_role;
+		else
+			port->pwr_role = TYPEC_SINK;
+		break;
+	}
+
+	switch (cap->data) {
+	case TYPEC_PORT_DFP:
+		port->data_role = TYPEC_HOST;
+		break;
+	case TYPEC_PORT_UFP:
+		port->data_role = TYPEC_DEVICE;
+		break;
+	case TYPEC_PORT_DRD:
+		if (cap->prefer_role == TYPEC_SOURCE)
+			port->data_role = TYPEC_HOST;
+		else
+			port->data_role = TYPEC_DEVICE;
+		break;
+	}
+
+	ida_init(&port->mode_ids);
+	mutex_init(&port->port_type_lock);
+
+	port->id = id;
+	port->ops = cap->ops;
+	port->port_type = cap->type;
+	port->prefer_role = cap->prefer_role;
+
+	device_initialize(&port->dev);
+	port->dev.class = &typec_class;
+	port->dev.parent = parent;
+	port->dev.fwnode = cap->fwnode;
+	port->dev.type = &typec_port_dev_type;
+	dev_set_name(&port->dev, "port%d", id);
+	dev_set_drvdata(&port->dev, cap->driver_data);
+
+	port->cap = kmemdup(cap, sizeof(*cap), GFP_KERNEL);
+	if (!port->cap) {
+		put_device(&port->dev);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	port->sw = typec_switch_get(&port->dev);
+	if (IS_ERR(port->sw)) {
+		ret = PTR_ERR(port->sw);
+		put_device(&port->dev);
+		return ERR_PTR(ret);
+	}
+
+	port->mux = typec_mux_get(&port->dev, NULL);
+	if (IS_ERR(port->mux)) {
+		ret = PTR_ERR(port->mux);
+		put_device(&port->dev);
+		return ERR_PTR(ret);
+	}
+
+	port->retimer = typec_retimer_get(&port->dev);
+	if (IS_ERR(port->retimer)) {
+		ret = PTR_ERR(port->retimer);
+		put_device(&port->dev);
+		return ERR_PTR(ret);
+	}
+
+	port->pd = cap->pd;
+
+	ret = device_add(&port->dev);
+	if (ret) {
+		dev_err(parent, "failed to register port (%d)\n", ret);
+		put_device(&port->dev);
+		return ERR_PTR(ret);
+	}
+
+	ret = usb_power_delivery_link_device(port->pd, &port->dev);
+	if (ret) {
+		dev_err(&port->dev, "failed to link pd\n");
+		device_unregister(&port->dev);
+		return ERR_PTR(ret);
+	}
+
+	ret = typec_link_ports(port);
+	if (ret)
+		dev_warn(&port->dev, "failed to create symlinks (%d)\n", ret);
+
+	return port;
+}
+EXPORT_SYMBOL_GPL(typec_register_port);
+
+/**
+ * typec_unregister_port - Unregister a USB Type-C Port
+ * @port: The port to be unregistered
+ *
+ * Unregister device created with typec_register_port().
+ */
+void typec_unregister_port(struct typec_port *port)
+{
+	if (!IS_ERR_OR_NULL(port)) {
+		typec_unlink_ports(port);
+		typec_port_set_usb_power_delivery(port, NULL);
+		device_unregister(&port->dev);
+	}
+}
+EXPORT_SYMBOL_GPL(typec_unregister_port);
+
+static int __init typec_init(void)
+{
+	int ret;
+
+	ret = bus_register(&typec_bus);
+	if (ret)
+		return ret;
+
+	ret = class_register(&typec_mux_class);
+	if (ret)
+		goto err_unregister_bus;
+
+	ret = class_register(&retimer_class);
+	if (ret)
+		goto err_unregister_mux_class;
+
+	ret = class_register(&typec_class);
+	if (ret)
+		goto err_unregister_retimer_class;
+
+	ret = usb_power_delivery_init();
+	if (ret)
+		goto err_unregister_class;
+
+	return 0;
+
+err_unregister_class:
+	class_unregister(&typec_class);
+
+err_unregister_retimer_class:
+	class_unregister(&retimer_class);
+
+err_unregister_mux_class:
+	class_unregister(&typec_mux_class);
+
+err_unregister_bus:
+	bus_unregister(&typec_bus);
+
+	return ret;
+}
+subsys_initcall(typec_init);
+
+static void __exit typec_exit(void)
+{
+	usb_power_delivery_exit();
+	class_unregister(&typec_class);
+	ida_destroy(&typec_index_ida);
+	bus_unregister(&typec_bus);
+	class_unregister(&typec_mux_class);
+	class_unregister(&retimer_class);
+}
+module_exit(typec_exit);
+
+MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("USB Type-C Connector Class");
diff --git a/drivers/usb/typec/class.h b/drivers/usb/typec/class.h
new file mode 100644
index 000000000..673b2952b
--- /dev/null
+++ b/drivers/usb/typec/class.h
@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __USB_TYPEC_CLASS__
+#define __USB_TYPEC_CLASS__
+
+#include <linux/device.h>
+#include <linux/usb/typec.h>
+
+struct typec_mux;
+struct typec_switch;
+
+struct typec_plug {
+	struct device			dev;
+	enum typec_plug_index		index;
+	struct ida			mode_ids;
+	int				num_altmodes;
+};
+
+struct typec_cable {
+	struct device			dev;
+	enum typec_plug_type		type;
+	struct usb_pd_identity		*identity;
+	unsigned int			active:1;
+	u16				pd_revision; /* 0300H = "3.0" */
+};
+
+struct typec_partner {
+	struct device			dev;
+	unsigned int			usb_pd:1;
+	struct usb_pd_identity		*identity;
+	enum typec_accessory		accessory;
+	struct ida			mode_ids;
+	int				num_altmodes;
+	u16				pd_revision; /* 0300H = "3.0" */
+	enum usb_pd_svdm_ver		svdm_version;
+
+	struct usb_power_delivery	*pd;
+};
+
+struct typec_port {
+	unsigned int			id;
+	struct device			dev;
+	struct ida			mode_ids;
+
+	struct usb_power_delivery	*pd;
+
+	int				prefer_role;
+	enum typec_data_role		data_role;
+	enum typec_role			pwr_role;
+	enum typec_role			vconn_role;
+	enum typec_pwr_opmode		pwr_opmode;
+	enum typec_port_type		port_type;
+	struct mutex			port_type_lock;
+
+	enum typec_orientation		orientation;
+	struct typec_switch		*sw;
+	struct typec_mux		*mux;
+	struct typec_retimer		*retimer;
+
+	const struct typec_capability	*cap;
+	const struct typec_operations   *ops;
+};
+
+#define to_typec_port(_dev_) container_of(_dev_, struct typec_port, dev)
+#define to_typec_plug(_dev_) container_of(_dev_, struct typec_plug, dev)
+#define to_typec_cable(_dev_) container_of(_dev_, struct typec_cable, dev)
+#define to_typec_partner(_dev_) container_of(_dev_, struct typec_partner, dev)
+
+extern const struct device_type typec_partner_dev_type;
+extern const struct device_type typec_cable_dev_type;
+extern const struct device_type typec_plug_dev_type;
+extern const struct device_type typec_port_dev_type;
+
+#define is_typec_partner(dev) ((dev)->type == &typec_partner_dev_type)
+#define is_typec_cable(dev) ((dev)->type == &typec_cable_dev_type)
+#define is_typec_plug(dev) ((dev)->type == &typec_plug_dev_type)
+#define is_typec_port(dev) ((dev)->type == &typec_port_dev_type)
+
+extern struct class typec_mux_class;
+extern struct class retimer_class;
+extern struct class typec_class;
+
+#if defined(CONFIG_ACPI)
+int typec_link_ports(struct typec_port *connector);
+void typec_unlink_ports(struct typec_port *connector);
+#else
+static inline int typec_link_ports(struct typec_port *connector) { return 0; }
+static inline void typec_unlink_ports(struct typec_port *connector) { }
+#endif
+
+#endif /* __USB_TYPEC_CLASS__ */
diff --git a/drivers/usb/typec/hd3ss3220.c b/drivers/usb/typec/hd3ss3220.c
new file mode 100644
index 000000000..2a58185fb
--- /dev/null
+++ b/drivers/usb/typec/hd3ss3220.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * TI HD3SS3220 Type-C DRP Port Controller Driver
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/usb/role.h>
+#include <linux/irqreturn.h>
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/usb/typec.h>
+#include <linux/delay.h>
+
+#define HD3SS3220_REG_CN_STAT_CTRL	0x09
+#define HD3SS3220_REG_GEN_CTRL		0x0A
+#define HD3SS3220_REG_DEV_REV		0xA0
+
+/* Register HD3SS3220_REG_CN_STAT_CTRL*/
+#define HD3SS3220_REG_CN_STAT_CTRL_ATTACHED_STATE_MASK	(BIT(7) | BIT(6))
+#define HD3SS3220_REG_CN_STAT_CTRL_AS_DFP		BIT(6)
+#define HD3SS3220_REG_CN_STAT_CTRL_AS_UFP		BIT(7)
+#define HD3SS3220_REG_CN_STAT_CTRL_TO_ACCESSORY		(BIT(7) | BIT(6))
+#define HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS		BIT(4)
+
+/* Register HD3SS3220_REG_GEN_CTRL*/
+#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_MASK		(BIT(2) | BIT(1))
+#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT	0x00
+#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK	BIT(1)
+#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC	(BIT(2) | BIT(1))
+
+struct hd3ss3220 {
+	struct device *dev;
+	struct regmap *regmap;
+	struct usb_role_switch	*role_sw;
+	struct typec_port *port;
+};
+
+static int hd3ss3220_set_source_pref(struct hd3ss3220 *hd3ss3220, int src_pref)
+{
+	return regmap_update_bits(hd3ss3220->regmap, HD3SS3220_REG_GEN_CTRL,
+				  HD3SS3220_REG_GEN_CTRL_SRC_PREF_MASK,
+				  src_pref);
+}
+
+static enum usb_role hd3ss3220_get_attached_state(struct hd3ss3220 *hd3ss3220)
+{
+	unsigned int reg_val;
+	enum usb_role attached_state;
+	int ret;
+
+	ret = regmap_read(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT_CTRL,
+			  &reg_val);
+	if (ret < 0)
+		return ret;
+
+	switch (reg_val & HD3SS3220_REG_CN_STAT_CTRL_ATTACHED_STATE_MASK) {
+	case HD3SS3220_REG_CN_STAT_CTRL_AS_DFP:
+		attached_state = USB_ROLE_HOST;
+		break;
+	case HD3SS3220_REG_CN_STAT_CTRL_AS_UFP:
+		attached_state = USB_ROLE_DEVICE;
+		break;
+	default:
+		attached_state = USB_ROLE_NONE;
+		break;
+	}
+
+	return attached_state;
+}
+
+static int hd3ss3220_dr_set(struct typec_port *port, enum typec_data_role role)
+{
+	struct hd3ss3220 *hd3ss3220 = typec_get_drvdata(port);
+	enum usb_role role_val;
+	int pref, ret = 0;
+
+	if (role == TYPEC_HOST) {
+		role_val = USB_ROLE_HOST;
+		pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC;
+	} else {
+		role_val = USB_ROLE_DEVICE;
+		pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK;
+	}
+
+	ret = hd3ss3220_set_source_pref(hd3ss3220, pref);
+	usleep_range(10, 100);
+
+	usb_role_switch_set_role(hd3ss3220->role_sw, role_val);
+	typec_set_data_role(hd3ss3220->port, role);
+
+	return ret;
+}
+
+static const struct typec_operations hd3ss3220_ops = {
+	.dr_set = hd3ss3220_dr_set
+};
+
+static void hd3ss3220_set_role(struct hd3ss3220 *hd3ss3220)
+{
+	enum usb_role role_state = hd3ss3220_get_attached_state(hd3ss3220);
+
+	usb_role_switch_set_role(hd3ss3220->role_sw, role_state);
+	if (role_state == USB_ROLE_NONE)
+		hd3ss3220_set_source_pref(hd3ss3220,
+				HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT);
+
+	switch (role_state) {
+	case USB_ROLE_HOST:
+		typec_set_data_role(hd3ss3220->port, TYPEC_HOST);
+		break;
+	case USB_ROLE_DEVICE:
+		typec_set_data_role(hd3ss3220->port, TYPEC_DEVICE);
+		break;
+	default:
+		break;
+	}
+}
+
+static irqreturn_t hd3ss3220_irq(struct hd3ss3220 *hd3ss3220)
+{
+	int err;
+
+	hd3ss3220_set_role(hd3ss3220);
+	err = regmap_write_bits(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT_CTRL,
+				HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS,
+				HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS);
+	if (err < 0)
+		return IRQ_NONE;
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t hd3ss3220_irq_handler(int irq, void *data)
+{
+	struct i2c_client *client = to_i2c_client(data);
+	struct hd3ss3220 *hd3ss3220 = i2c_get_clientdata(client);
+
+	return hd3ss3220_irq(hd3ss3220);
+}
+
+static const struct regmap_config config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x0A,
+};
+
+static int hd3ss3220_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct typec_capability typec_cap = { };
+	struct hd3ss3220 *hd3ss3220;
+	struct fwnode_handle *connector, *ep;
+	int ret;
+	unsigned int data;
+
+	hd3ss3220 = devm_kzalloc(&client->dev, sizeof(struct hd3ss3220),
+				 GFP_KERNEL);
+	if (!hd3ss3220)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, hd3ss3220);
+
+	hd3ss3220->dev = &client->dev;
+	hd3ss3220->regmap = devm_regmap_init_i2c(client, &config);
+	if (IS_ERR(hd3ss3220->regmap))
+		return PTR_ERR(hd3ss3220->regmap);
+
+	hd3ss3220_set_source_pref(hd3ss3220,
+				  HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT);
+	/* For backward compatibility check the connector child node first */
+	connector = device_get_named_child_node(hd3ss3220->dev, "connector");
+	if (connector) {
+		hd3ss3220->role_sw = fwnode_usb_role_switch_get(connector);
+	} else {
+		ep = fwnode_graph_get_next_endpoint(dev_fwnode(hd3ss3220->dev), NULL);
+		if (!ep)
+			return -ENODEV;
+		connector = fwnode_graph_get_remote_port_parent(ep);
+		fwnode_handle_put(ep);
+		if (!connector)
+			return -ENODEV;
+		hd3ss3220->role_sw = usb_role_switch_get(hd3ss3220->dev);
+	}
+
+	if (IS_ERR(hd3ss3220->role_sw)) {
+		ret = PTR_ERR(hd3ss3220->role_sw);
+		goto err_put_fwnode;
+	}
+
+	typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
+	typec_cap.driver_data = hd3ss3220;
+	typec_cap.type = TYPEC_PORT_DRP;
+	typec_cap.data = TYPEC_PORT_DRD;
+	typec_cap.ops = &hd3ss3220_ops;
+	typec_cap.fwnode = connector;
+
+	hd3ss3220->port = typec_register_port(&client->dev, &typec_cap);
+	if (IS_ERR(hd3ss3220->port)) {
+		ret = PTR_ERR(hd3ss3220->port);
+		goto err_put_role;
+	}
+
+	hd3ss3220_set_role(hd3ss3220);
+	ret = regmap_read(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT_CTRL, &data);
+	if (ret < 0)
+		goto err_unreg_port;
+
+	if (data & HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS) {
+		ret = regmap_write(hd3ss3220->regmap,
+				HD3SS3220_REG_CN_STAT_CTRL,
+				data | HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS);
+		if (ret < 0)
+			goto err_unreg_port;
+	}
+
+	if (client->irq > 0) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					hd3ss3220_irq_handler,
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					"hd3ss3220", &client->dev);
+		if (ret)
+			goto err_unreg_port;
+	}
+
+	ret = i2c_smbus_read_byte_data(client, HD3SS3220_REG_DEV_REV);
+	if (ret < 0)
+		goto err_unreg_port;
+
+	fwnode_handle_put(connector);
+
+	dev_info(&client->dev, "probed revision=0x%x\n", ret);
+
+	return 0;
+err_unreg_port:
+	typec_unregister_port(hd3ss3220->port);
+err_put_role:
+	usb_role_switch_put(hd3ss3220->role_sw);
+err_put_fwnode:
+	fwnode_handle_put(connector);
+
+	return ret;
+}
+
+static void hd3ss3220_remove(struct i2c_client *client)
+{
+	struct hd3ss3220 *hd3ss3220 = i2c_get_clientdata(client);
+
+	typec_unregister_port(hd3ss3220->port);
+	usb_role_switch_put(hd3ss3220->role_sw);
+}
+
+static const struct of_device_id dev_ids[] = {
+	{ .compatible = "ti,hd3ss3220"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, dev_ids);
+
+static struct i2c_driver hd3ss3220_driver = {
+	.driver = {
+		.name = "hd3ss3220",
+		.of_match_table = of_match_ptr(dev_ids),
+	},
+	.probe = hd3ss3220_probe,
+	.remove =  hd3ss3220_remove,
+};
+
+module_i2c_driver(hd3ss3220_driver);
+
+MODULE_AUTHOR("Biju Das <biju.das@bp.renesas.com>");
+MODULE_DESCRIPTION("TI HD3SS3220 DRP Port Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c
new file mode 100644
index 000000000..941735c73
--- /dev/null
+++ b/drivers/usb/typec/mux.c
@@ -0,0 +1,518 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Type-C Multiplexer/DeMultiplexer Switch support
+ *
+ * Copyright (C) 2018 Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ *         Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+
+#include "class.h"
+#include "mux.h"
+
+#define TYPEC_MUX_MAX_DEVS	3
+
+struct typec_switch {
+	struct typec_switch_dev *sw_devs[TYPEC_MUX_MAX_DEVS];
+	unsigned int num_sw_devs;
+};
+
+static int switch_fwnode_match(struct device *dev, const void *fwnode)
+{
+	if (!is_typec_switch_dev(dev))
+		return 0;
+
+	return device_match_fwnode(dev, fwnode);
+}
+
+static void *typec_switch_match(struct fwnode_handle *fwnode, const char *id,
+				void *data)
+{
+	struct device *dev;
+
+	/*
+	 * Device graph (OF graph) does not give any means to identify the
+	 * device type or the device class of the remote port parent that @fwnode
+	 * represents, so in order to identify the type or the class of @fwnode
+	 * an additional device property is needed. With typec switches the
+	 * property is named "orientation-switch" (@id). The value of the device
+	 * property is ignored.
+	 */
+	if (id && !fwnode_property_present(fwnode, id))
+		return NULL;
+
+	/*
+	 * At this point we are sure that @fwnode is a typec switch in all
+	 * cases. If the switch hasn't yet been registered for some reason, the
+	 * function "defers probe" for now.
+	 */
+	dev = class_find_device(&typec_mux_class, NULL, fwnode,
+				switch_fwnode_match);
+
+	return dev ? to_typec_switch_dev(dev) : ERR_PTR(-EPROBE_DEFER);
+}
+
+/**
+ * fwnode_typec_switch_get - Find USB Type-C orientation switch
+ * @fwnode: The caller device node
+ *
+ * Finds a switch linked with @dev. Returns a reference to the switch on
+ * success, NULL if no matching connection was found, or
+ * ERR_PTR(-EPROBE_DEFER) when a connection was found but the switch
+ * has not been enumerated yet.
+ */
+struct typec_switch *fwnode_typec_switch_get(struct fwnode_handle *fwnode)
+{
+	struct typec_switch_dev *sw_devs[TYPEC_MUX_MAX_DEVS];
+	struct typec_switch *sw;
+	int count;
+	int err;
+	int i;
+
+	sw = kzalloc(sizeof(*sw), GFP_KERNEL);
+	if (!sw)
+		return ERR_PTR(-ENOMEM);
+
+	count = fwnode_connection_find_matches(fwnode, "orientation-switch", NULL,
+					       typec_switch_match,
+					       (void **)sw_devs,
+					       ARRAY_SIZE(sw_devs));
+	if (count <= 0) {
+		kfree(sw);
+		return NULL;
+	}
+
+	for (i = 0; i < count; i++) {
+		if (IS_ERR(sw_devs[i])) {
+			err = PTR_ERR(sw_devs[i]);
+			goto put_sw_devs;
+		}
+	}
+
+	for (i = 0; i < count; i++) {
+		WARN_ON(!try_module_get(sw_devs[i]->dev.parent->driver->owner));
+		sw->sw_devs[i] = sw_devs[i];
+	}
+
+	sw->num_sw_devs = count;
+
+	return sw;
+
+put_sw_devs:
+	for (i = 0; i < count; i++) {
+		if (!IS_ERR(sw_devs[i]))
+			put_device(&sw_devs[i]->dev);
+	}
+
+	kfree(sw);
+
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(fwnode_typec_switch_get);
+
+/**
+ * typec_switch_put - Release USB Type-C orientation switch
+ * @sw: USB Type-C orientation switch
+ *
+ * Decrement reference count for @sw.
+ */
+void typec_switch_put(struct typec_switch *sw)
+{
+	struct typec_switch_dev *sw_dev;
+	unsigned int i;
+
+	if (IS_ERR_OR_NULL(sw))
+		return;
+
+	for (i = 0; i < sw->num_sw_devs; i++) {
+		sw_dev = sw->sw_devs[i];
+
+		module_put(sw_dev->dev.parent->driver->owner);
+		put_device(&sw_dev->dev);
+	}
+	kfree(sw);
+}
+EXPORT_SYMBOL_GPL(typec_switch_put);
+
+static void typec_switch_release(struct device *dev)
+{
+	kfree(to_typec_switch_dev(dev));
+}
+
+const struct device_type typec_switch_dev_type = {
+	.name = "orientation_switch",
+	.release = typec_switch_release,
+};
+
+/**
+ * typec_switch_register - Register USB Type-C orientation switch
+ * @parent: Parent device
+ * @desc: Orientation switch description
+ *
+ * This function registers a switch that can be used for routing the correct
+ * data pairs depending on the cable plug orientation from the USB Type-C
+ * connector to the USB controllers. USB Type-C plugs can be inserted
+ * right-side-up or upside-down.
+ */
+struct typec_switch_dev *
+typec_switch_register(struct device *parent,
+		      const struct typec_switch_desc *desc)
+{
+	struct typec_switch_dev *sw_dev;
+	int ret;
+
+	if (!desc || !desc->set)
+		return ERR_PTR(-EINVAL);
+
+	sw_dev = kzalloc(sizeof(*sw_dev), GFP_KERNEL);
+	if (!sw_dev)
+		return ERR_PTR(-ENOMEM);
+
+	sw_dev->set = desc->set;
+
+	device_initialize(&sw_dev->dev);
+	sw_dev->dev.parent = parent;
+	sw_dev->dev.fwnode = desc->fwnode;
+	sw_dev->dev.class = &typec_mux_class;
+	sw_dev->dev.type = &typec_switch_dev_type;
+	sw_dev->dev.driver_data = desc->drvdata;
+	ret = dev_set_name(&sw_dev->dev, "%s-switch", desc->name ? desc->name : dev_name(parent));
+	if (ret) {
+		put_device(&sw_dev->dev);
+		return ERR_PTR(ret);
+	}
+
+	ret = device_add(&sw_dev->dev);
+	if (ret) {
+		dev_err(parent, "failed to register switch (%d)\n", ret);
+		put_device(&sw_dev->dev);
+		return ERR_PTR(ret);
+	}
+
+	return sw_dev;
+}
+EXPORT_SYMBOL_GPL(typec_switch_register);
+
+int typec_switch_set(struct typec_switch *sw,
+		     enum typec_orientation orientation)
+{
+	struct typec_switch_dev *sw_dev;
+	unsigned int i;
+	int ret;
+
+	if (IS_ERR_OR_NULL(sw))
+		return 0;
+
+	for (i = 0; i < sw->num_sw_devs; i++) {
+		sw_dev = sw->sw_devs[i];
+
+		ret = sw_dev->set(sw_dev, orientation);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(typec_switch_set);
+
+/**
+ * typec_switch_unregister - Unregister USB Type-C orientation switch
+ * @sw_dev: USB Type-C orientation switch
+ *
+ * Unregister switch that was registered with typec_switch_register().
+ */
+void typec_switch_unregister(struct typec_switch_dev *sw_dev)
+{
+	if (!IS_ERR_OR_NULL(sw_dev))
+		device_unregister(&sw_dev->dev);
+}
+EXPORT_SYMBOL_GPL(typec_switch_unregister);
+
+void typec_switch_set_drvdata(struct typec_switch_dev *sw_dev, void *data)
+{
+	dev_set_drvdata(&sw_dev->dev, data);
+}
+EXPORT_SYMBOL_GPL(typec_switch_set_drvdata);
+
+void *typec_switch_get_drvdata(struct typec_switch_dev *sw_dev)
+{
+	return dev_get_drvdata(&sw_dev->dev);
+}
+EXPORT_SYMBOL_GPL(typec_switch_get_drvdata);
+
+/* ------------------------------------------------------------------------- */
+
+struct typec_mux {
+	struct typec_mux_dev *mux_devs[TYPEC_MUX_MAX_DEVS];
+	unsigned int num_mux_devs;
+};
+
+static int mux_fwnode_match(struct device *dev, const void *fwnode)
+{
+	if (!is_typec_mux_dev(dev))
+		return 0;
+
+	return device_match_fwnode(dev, fwnode);
+}
+
+static void *typec_mux_match(struct fwnode_handle *fwnode, const char *id,
+			     void *data)
+{
+	const struct typec_altmode_desc *desc = data;
+	struct device *dev;
+	bool match;
+	int nval;
+	u16 *val;
+	int ret;
+	int i;
+
+	/*
+	 * Check has the identifier already been "consumed". If it
+	 * has, no need to do any extra connection identification.
+	 */
+	match = !id;
+	if (match)
+		goto find_mux;
+
+	if (!desc) {
+		/*
+		 * Accessory Mode muxes & muxes which explicitly specify
+		 * the required identifier can avoid SVID matching.
+		 */
+		match = fwnode_property_present(fwnode, "accessory") ||
+			fwnode_property_present(fwnode, id);
+		if (match)
+			goto find_mux;
+		return NULL;
+	}
+
+	/* Alternate Mode muxes */
+	nval = fwnode_property_count_u16(fwnode, "svid");
+	if (nval <= 0)
+		return NULL;
+
+	val = kcalloc(nval, sizeof(*val), GFP_KERNEL);
+	if (!val)
+		return ERR_PTR(-ENOMEM);
+
+	ret = fwnode_property_read_u16_array(fwnode, "svid", val, nval);
+	if (ret < 0) {
+		kfree(val);
+		return ERR_PTR(ret);
+	}
+
+	for (i = 0; i < nval; i++) {
+		match = val[i] == desc->svid;
+		if (match) {
+			kfree(val);
+			goto find_mux;
+		}
+	}
+	kfree(val);
+	return NULL;
+
+find_mux:
+	dev = class_find_device(&typec_mux_class, NULL, fwnode,
+				mux_fwnode_match);
+
+	return dev ? to_typec_mux_dev(dev) : ERR_PTR(-EPROBE_DEFER);
+}
+
+/**
+ * fwnode_typec_mux_get - Find USB Type-C Multiplexer
+ * @fwnode: The caller device node
+ * @desc: Alt Mode description
+ *
+ * Finds a mux linked to the caller. This function is primarily meant for the
+ * Type-C drivers. Returns a reference to the mux on success, NULL if no
+ * matching connection was found, or ERR_PTR(-EPROBE_DEFER) when a connection
+ * was found but the mux has not been enumerated yet.
+ */
+struct typec_mux *fwnode_typec_mux_get(struct fwnode_handle *fwnode,
+				       const struct typec_altmode_desc *desc)
+{
+	struct typec_mux_dev *mux_devs[TYPEC_MUX_MAX_DEVS];
+	struct typec_mux *mux;
+	int count;
+	int err;
+	int i;
+
+	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return ERR_PTR(-ENOMEM);
+
+	count = fwnode_connection_find_matches(fwnode, "mode-switch",
+					       (void *)desc, typec_mux_match,
+					       (void **)mux_devs,
+					       ARRAY_SIZE(mux_devs));
+	if (count <= 0) {
+		kfree(mux);
+		return NULL;
+	}
+
+	for (i = 0; i < count; i++) {
+		if (IS_ERR(mux_devs[i])) {
+			err = PTR_ERR(mux_devs[i]);
+			goto put_mux_devs;
+		}
+	}
+
+	for (i = 0; i < count; i++) {
+		WARN_ON(!try_module_get(mux_devs[i]->dev.parent->driver->owner));
+		mux->mux_devs[i] = mux_devs[i];
+	}
+
+	mux->num_mux_devs = count;
+
+	return mux;
+
+put_mux_devs:
+	for (i = 0; i < count; i++) {
+		if (!IS_ERR(mux_devs[i]))
+			put_device(&mux_devs[i]->dev);
+	}
+
+	kfree(mux);
+
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(fwnode_typec_mux_get);
+
+/**
+ * typec_mux_put - Release handle to a Multiplexer
+ * @mux: USB Type-C Connector Multiplexer/DeMultiplexer
+ *
+ * Decrements reference count for @mux.
+ */
+void typec_mux_put(struct typec_mux *mux)
+{
+	struct typec_mux_dev *mux_dev;
+	unsigned int i;
+
+	if (IS_ERR_OR_NULL(mux))
+		return;
+
+	for (i = 0; i < mux->num_mux_devs; i++) {
+		mux_dev = mux->mux_devs[i];
+		module_put(mux_dev->dev.parent->driver->owner);
+		put_device(&mux_dev->dev);
+	}
+	kfree(mux);
+}
+EXPORT_SYMBOL_GPL(typec_mux_put);
+
+int typec_mux_set(struct typec_mux *mux, struct typec_mux_state *state)
+{
+	struct typec_mux_dev *mux_dev;
+	unsigned int i;
+	int ret;
+
+	if (IS_ERR_OR_NULL(mux))
+		return 0;
+
+	for (i = 0; i < mux->num_mux_devs; i++) {
+		mux_dev = mux->mux_devs[i];
+
+		ret = mux_dev->set(mux_dev, state);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(typec_mux_set);
+
+static void typec_mux_release(struct device *dev)
+{
+	kfree(to_typec_mux_dev(dev));
+}
+
+const struct device_type typec_mux_dev_type = {
+	.name = "mode_switch",
+	.release = typec_mux_release,
+};
+
+/**
+ * typec_mux_register - Register Multiplexer routing USB Type-C pins
+ * @parent: Parent device
+ * @desc: Multiplexer description
+ *
+ * USB Type-C connectors can be used for alternate modes of operation besides
+ * USB when Accessory/Alternate Modes are supported. With some of those modes,
+ * the pins on the connector need to be reconfigured. This function registers
+ * multiplexer switches routing the pins on the connector.
+ */
+struct typec_mux_dev *
+typec_mux_register(struct device *parent, const struct typec_mux_desc *desc)
+{
+	struct typec_mux_dev *mux_dev;
+	int ret;
+
+	if (!desc || !desc->set)
+		return ERR_PTR(-EINVAL);
+
+	mux_dev = kzalloc(sizeof(*mux_dev), GFP_KERNEL);
+	if (!mux_dev)
+		return ERR_PTR(-ENOMEM);
+
+	mux_dev->set = desc->set;
+
+	device_initialize(&mux_dev->dev);
+	mux_dev->dev.parent = parent;
+	mux_dev->dev.fwnode = desc->fwnode;
+	mux_dev->dev.class = &typec_mux_class;
+	mux_dev->dev.type = &typec_mux_dev_type;
+	mux_dev->dev.driver_data = desc->drvdata;
+	ret = dev_set_name(&mux_dev->dev, "%s-mux", desc->name ? desc->name : dev_name(parent));
+	if (ret) {
+		put_device(&mux_dev->dev);
+		return ERR_PTR(ret);
+	}
+
+	ret = device_add(&mux_dev->dev);
+	if (ret) {
+		dev_err(parent, "failed to register mux (%d)\n", ret);
+		put_device(&mux_dev->dev);
+		return ERR_PTR(ret);
+	}
+
+	return mux_dev;
+}
+EXPORT_SYMBOL_GPL(typec_mux_register);
+
+/**
+ * typec_mux_unregister - Unregister Multiplexer Switch
+ * @mux_dev: USB Type-C Connector Multiplexer/DeMultiplexer
+ *
+ * Unregister mux that was registered with typec_mux_register().
+ */
+void typec_mux_unregister(struct typec_mux_dev *mux_dev)
+{
+	if (!IS_ERR_OR_NULL(mux_dev))
+		device_unregister(&mux_dev->dev);
+}
+EXPORT_SYMBOL_GPL(typec_mux_unregister);
+
+void typec_mux_set_drvdata(struct typec_mux_dev *mux_dev, void *data)
+{
+	dev_set_drvdata(&mux_dev->dev, data);
+}
+EXPORT_SYMBOL_GPL(typec_mux_set_drvdata);
+
+void *typec_mux_get_drvdata(struct typec_mux_dev *mux_dev)
+{
+	return dev_get_drvdata(&mux_dev->dev);
+}
+EXPORT_SYMBOL_GPL(typec_mux_get_drvdata);
+
+struct class typec_mux_class = {
+	.name = "typec_mux",
+	.owner = THIS_MODULE,
+};
diff --git a/drivers/usb/typec/mux.h b/drivers/usb/typec/mux.h
new file mode 100644
index 000000000..58f0f28b6
--- /dev/null
+++ b/drivers/usb/typec/mux.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __USB_TYPEC_MUX__
+#define __USB_TYPEC_MUX__
+
+#include <linux/usb/typec_mux.h>
+
+struct typec_switch_dev {
+	struct device dev;
+	typec_switch_set_fn_t set;
+};
+
+struct typec_mux_dev {
+	struct device dev;
+	typec_mux_set_fn_t set;
+};
+
+#define to_typec_switch_dev(_dev_) container_of(_dev_, struct typec_switch_dev, dev)
+#define to_typec_mux_dev(_dev_) container_of(_dev_, struct typec_mux_dev, dev)
+
+extern const struct device_type typec_switch_dev_type;
+extern const struct device_type typec_mux_dev_type;
+
+#define is_typec_switch_dev(dev) ((dev)->type == &typec_switch_dev_type)
+#define is_typec_mux_dev(dev) ((dev)->type == &typec_mux_dev_type)
+
+#endif /* __USB_TYPEC_MUX__ */
diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
new file mode 100644
index 000000000..5eb2c17d7
--- /dev/null
+++ b/drivers/usb/typec/mux/Kconfig
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "USB Type-C Multiplexer/DeMultiplexer Switch support"
+
+config TYPEC_MUX_FSA4480
+	tristate "ON Semi FSA4480 Analog Audio Switch driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Driver for the ON Semiconductor FSA4480 Analog Audio Switch, which
+	  provides support for muxing analog audio and sideband signals on a
+	  common USB Type-C connector.
+	  If compiled as a module, the module will be named fsa4480.
+
+config TYPEC_MUX_PI3USB30532
+	tristate "Pericom PI3USB30532 Type-C cross switch driver"
+	depends on I2C
+	help
+	  Say Y or M if your system has a Pericom PI3USB30532 Type-C cross
+	  switch / mux chip found on some devices with a Type-C port.
+
+config TYPEC_MUX_INTEL_PMC
+	tristate "Intel PMC mux control"
+	depends on ACPI
+	depends on INTEL_SCU_IPC
+	select USB_ROLE_SWITCH
+	help
+	  Driver for USB muxes controlled by Intel PMC FW. Intel PMC FW can
+	  control the USB role switch and also the multiplexer/demultiplexer
+	  switches used with USB Type-C Alternate Modes.
+
+endmenu
diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile
new file mode 100644
index 000000000..e52a56c16
--- /dev/null
+++ b/drivers/usb/typec/mux/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_TYPEC_MUX_FSA4480)		+= fsa4480.o
+obj-$(CONFIG_TYPEC_MUX_PI3USB30532)	+= pi3usb30532.o
+obj-$(CONFIG_TYPEC_MUX_INTEL_PMC)	+= intel_pmc_mux.o
diff --git a/drivers/usb/typec/mux/fsa4480.c b/drivers/usb/typec/mux/fsa4480.c
new file mode 100644
index 000000000..d6495e533
--- /dev/null
+++ b/drivers/usb/typec/mux/fsa4480.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021-2022 Linaro Ltd.
+ * Copyright (C) 2018-2020 The Linux Foundation
+ */
+
+#include <linux/bits.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
+
+#define FSA4480_SWITCH_ENABLE	0x04
+#define FSA4480_SWITCH_SELECT	0x05
+#define FSA4480_SWITCH_STATUS1	0x07
+#define FSA4480_SLOW_L		0x08
+#define FSA4480_SLOW_R		0x09
+#define FSA4480_SLOW_MIC	0x0a
+#define FSA4480_SLOW_SENSE	0x0b
+#define FSA4480_SLOW_GND	0x0c
+#define FSA4480_DELAY_L_R	0x0d
+#define FSA4480_DELAY_L_MIC	0x0e
+#define FSA4480_DELAY_L_SENSE	0x0f
+#define FSA4480_DELAY_L_AGND	0x10
+#define FSA4480_RESET		0x1e
+#define FSA4480_MAX_REGISTER	0x1f
+
+#define FSA4480_ENABLE_DEVICE	BIT(7)
+#define FSA4480_ENABLE_SBU	GENMASK(6, 5)
+#define FSA4480_ENABLE_USB	GENMASK(4, 3)
+
+#define FSA4480_SEL_SBU_REVERSE	GENMASK(6, 5)
+#define FSA4480_SEL_USB		GENMASK(4, 3)
+
+struct fsa4480 {
+	struct i2c_client *client;
+
+	/* used to serialize concurrent change requests */
+	struct mutex lock;
+
+	struct typec_switch_dev *sw;
+	struct typec_mux_dev *mux;
+
+	struct regmap *regmap;
+
+	u8 cur_enable;
+	u8 cur_select;
+};
+
+static const struct regmap_config fsa4480_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = FSA4480_MAX_REGISTER,
+	/* Accesses only done under fsa4480->lock */
+	.disable_locking = true,
+};
+
+static int fsa4480_switch_set(struct typec_switch_dev *sw,
+			      enum typec_orientation orientation)
+{
+	struct fsa4480 *fsa = typec_switch_get_drvdata(sw);
+	u8 new_sel;
+
+	mutex_lock(&fsa->lock);
+	new_sel = FSA4480_SEL_USB;
+	if (orientation == TYPEC_ORIENTATION_REVERSE)
+		new_sel |= FSA4480_SEL_SBU_REVERSE;
+
+	if (new_sel == fsa->cur_select)
+		goto out_unlock;
+
+	if (fsa->cur_enable & FSA4480_ENABLE_SBU) {
+		/* Disable SBU output while re-configuring the switch */
+		regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE,
+			     fsa->cur_enable & ~FSA4480_ENABLE_SBU);
+
+		/* 35us to allow the SBU switch to turn off */
+		usleep_range(35, 1000);
+	}
+
+	regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, new_sel);
+	fsa->cur_select = new_sel;
+
+	if (fsa->cur_enable & FSA4480_ENABLE_SBU) {
+		regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable);
+
+		/* 15us to allow the SBU switch to turn on again */
+		usleep_range(15, 1000);
+	}
+
+out_unlock:
+	mutex_unlock(&fsa->lock);
+
+	return 0;
+}
+
+static int fsa4480_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
+{
+	struct fsa4480 *fsa = typec_mux_get_drvdata(mux);
+	u8 new_enable;
+
+	mutex_lock(&fsa->lock);
+
+	new_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB;
+	if (state->mode >= TYPEC_DP_STATE_A)
+		new_enable |= FSA4480_ENABLE_SBU;
+
+	if (new_enable == fsa->cur_enable)
+		goto out_unlock;
+
+	regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, new_enable);
+	fsa->cur_enable = new_enable;
+
+	if (new_enable & FSA4480_ENABLE_SBU) {
+		/* 15us to allow the SBU switch to turn off */
+		usleep_range(15, 1000);
+	}
+
+out_unlock:
+	mutex_unlock(&fsa->lock);
+
+	return 0;
+}
+
+static int fsa4480_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct typec_switch_desc sw_desc = { };
+	struct typec_mux_desc mux_desc = { };
+	struct fsa4480 *fsa;
+
+	fsa = devm_kzalloc(dev, sizeof(*fsa), GFP_KERNEL);
+	if (!fsa)
+		return -ENOMEM;
+
+	fsa->client = client;
+	mutex_init(&fsa->lock);
+
+	fsa->regmap = devm_regmap_init_i2c(client, &fsa4480_regmap_config);
+	if (IS_ERR(fsa->regmap))
+		return dev_err_probe(dev, PTR_ERR(fsa->regmap), "failed to initialize regmap\n");
+
+	fsa->cur_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB;
+	fsa->cur_select = FSA4480_SEL_USB;
+
+	/* set default settings */
+	regmap_write(fsa->regmap, FSA4480_SLOW_L, 0x00);
+	regmap_write(fsa->regmap, FSA4480_SLOW_R, 0x00);
+	regmap_write(fsa->regmap, FSA4480_SLOW_MIC, 0x00);
+	regmap_write(fsa->regmap, FSA4480_SLOW_SENSE, 0x00);
+	regmap_write(fsa->regmap, FSA4480_SLOW_GND, 0x00);
+	regmap_write(fsa->regmap, FSA4480_DELAY_L_R, 0x00);
+	regmap_write(fsa->regmap, FSA4480_DELAY_L_MIC, 0x00);
+	regmap_write(fsa->regmap, FSA4480_DELAY_L_SENSE, 0x00);
+	regmap_write(fsa->regmap, FSA4480_DELAY_L_AGND, 0x09);
+	regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, fsa->cur_select);
+	regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable);
+
+	sw_desc.drvdata = fsa;
+	sw_desc.fwnode = dev_fwnode(dev);
+	sw_desc.set = fsa4480_switch_set;
+
+	fsa->sw = typec_switch_register(dev, &sw_desc);
+	if (IS_ERR(fsa->sw))
+		return dev_err_probe(dev, PTR_ERR(fsa->sw), "failed to register typec switch\n");
+
+	mux_desc.drvdata = fsa;
+	mux_desc.fwnode = dev_fwnode(dev);
+	mux_desc.set = fsa4480_mux_set;
+
+	fsa->mux = typec_mux_register(dev, &mux_desc);
+	if (IS_ERR(fsa->mux)) {
+		typec_switch_unregister(fsa->sw);
+		return dev_err_probe(dev, PTR_ERR(fsa->mux), "failed to register typec mux\n");
+	}
+
+	i2c_set_clientdata(client, fsa);
+	return 0;
+}
+
+static void fsa4480_remove(struct i2c_client *client)
+{
+	struct fsa4480 *fsa = i2c_get_clientdata(client);
+
+	typec_mux_unregister(fsa->mux);
+	typec_switch_unregister(fsa->sw);
+}
+
+static const struct i2c_device_id fsa4480_table[] = {
+	{ "fsa4480" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, fsa4480_table);
+
+static const struct of_device_id fsa4480_of_table[] = {
+	{ .compatible = "fcs,fsa4480" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, fsa4480_of_table);
+
+static struct i2c_driver fsa4480_driver = {
+	.driver = {
+		.name = "fsa4480",
+		.of_match_table = fsa4480_of_table,
+	},
+	.probe_new	= fsa4480_probe,
+	.remove		= fsa4480_remove,
+	.id_table	= fsa4480_table,
+};
+module_i2c_driver(fsa4480_driver);
+
+MODULE_DESCRIPTION("ON Semiconductor FSA4480 driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
new file mode 100644
index 000000000..87e2c9130
--- /dev/null
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -0,0 +1,745 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Intel PMC USB mux control
+ *
+ * Copyright (C) 2020 Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/usb/pd.h>
+#include <linux/usb/role.h>
+#include <linux/usb/typec_mux.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_tbt.h>
+
+#include <asm/intel_scu_ipc.h>
+
+#define PMC_USBC_CMD		0xa7
+
+/* Response status bits */
+#define PMC_USB_RESP_STATUS_FAILURE	BIT(0)
+#define PMC_USB_RESP_STATUS_FATAL	BIT(1)
+
+/* "Usage" OOB Message field values */
+enum {
+	PMC_USB_CONNECT,
+	PMC_USB_DISCONNECT,
+	PMC_USB_SAFE_MODE,
+	PMC_USB_ALT_MODE,
+	PMC_USB_DP_HPD,
+};
+
+#define PMC_USB_MSG_USB2_PORT_SHIFT	0
+#define PMC_USB_MSG_USB3_PORT_SHIFT	4
+#define PMC_USB_MSG_UFP_SHIFT		4
+#define PMC_USB_MSG_ORI_HSL_SHIFT	5
+#define PMC_USB_MSG_ORI_AUX_SHIFT	6
+
+/* Alt Mode Request */
+struct altmode_req {
+	u8 usage;
+	u8 mode_type;
+	u8 mode_id;
+	u8 reserved;
+	u32 mode_data;
+} __packed;
+
+#define PMC_USB_MODE_TYPE_SHIFT		4
+
+enum {
+	PMC_USB_MODE_TYPE_USB,
+	PMC_USB_MODE_TYPE_DP,
+	PMC_USB_MODE_TYPE_TBT,
+};
+
+/* Common Mode Data bits */
+#define PMC_USB_ALTMODE_ACTIVE_CABLE	BIT(2)
+
+#define PMC_USB_ALTMODE_ORI_SHIFT	1
+#define PMC_USB_ALTMODE_UFP_SHIFT	3
+
+/* DP specific Mode Data bits */
+#define PMC_USB_ALTMODE_DP_MODE_SHIFT	8
+
+/* TBT specific Mode Data bits */
+#define PMC_USB_ALTMODE_TBT_TYPE	BIT(17)
+#define PMC_USB_ALTMODE_CABLE_TYPE	BIT(18)
+#define PMC_USB_ALTMODE_ACTIVE_LINK	BIT(20)
+#define PMC_USB_ALTMODE_FORCE_LSR	BIT(23)
+#define PMC_USB_ALTMODE_CABLE_SPD(_s_)	(((_s_) & GENMASK(2, 0)) << 25)
+#define   PMC_USB_ALTMODE_CABLE_USB31	1
+#define   PMC_USB_ALTMODE_CABLE_10GPS	2
+#define   PMC_USB_ALTMODE_CABLE_20GPS	3
+#define PMC_USB_ALTMODE_TBT_GEN(_g_)	(((_g_) & GENMASK(1, 0)) << 28)
+
+/* Display HPD Request bits */
+#define PMC_USB_DP_HPD_LVL		BIT(4)
+#define PMC_USB_DP_HPD_IRQ		BIT(5)
+
+/*
+ * Input Output Manager (IOM) PORT STATUS
+ */
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_MASK		GENMASK(9, 6)
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_SHIFT		6
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_USB		0x03
+/* activity type: Safe Mode */
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_SAFE_MODE		0x04
+/* activity type: Display Port */
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_DP		0x05
+/* activity type: Display Port Multi Function Device */
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_DP_MFD		0x06
+/* activity type: Thunderbolt */
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_TBT		0x07
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_ALT_MODE_USB	0x0c
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_ALT_MODE_TBT_USB	0x0d
+/* Upstream Facing Port Information */
+#define IOM_PORT_STATUS_UFP				BIT(10)
+/* Display Port Hot Plug Detect status */
+#define IOM_PORT_STATUS_DHPD_HPD_STATUS_MASK		GENMASK(13, 12)
+#define IOM_PORT_STATUS_DHPD_HPD_STATUS_SHIFT		12
+#define IOM_PORT_STATUS_DHPD_HPD_STATUS_ASSERT		0x01
+#define IOM_PORT_STATUS_DHPD_HPD_SOURCE_TBT		BIT(14)
+#define IOM_PORT_STATUS_CONNECTED			BIT(31)
+
+#define IOM_PORT_ACTIVITY_IS(_status_, _type_)				\
+	((((_status_) & IOM_PORT_STATUS_ACTIVITY_TYPE_MASK) >>		\
+	  IOM_PORT_STATUS_ACTIVITY_TYPE_SHIFT) ==			\
+	 (IOM_PORT_STATUS_ACTIVITY_TYPE_##_type_))
+
+#define IOM_PORT_HPD_ASSERTED(_status_)					\
+	((((_status_) & IOM_PORT_STATUS_DHPD_HPD_STATUS_MASK) >>	\
+	  IOM_PORT_STATUS_DHPD_HPD_STATUS_SHIFT) &			\
+	 IOM_PORT_STATUS_DHPD_HPD_STATUS_ASSERT)
+
+struct pmc_usb;
+
+struct pmc_usb_port {
+	int num;
+	u32 iom_status;
+	struct pmc_usb *pmc;
+	struct typec_mux_dev *typec_mux;
+	struct typec_switch_dev *typec_sw;
+	struct usb_role_switch *usb_sw;
+
+	enum typec_orientation orientation;
+	enum usb_role role;
+
+	u8 usb2_port;
+	u8 usb3_port;
+
+	enum typec_orientation sbu_orientation;
+	enum typec_orientation hsl_orientation;
+};
+
+struct pmc_usb {
+	u8 num_ports;
+	struct device *dev;
+	struct intel_scu_ipc_dev *ipc;
+	struct pmc_usb_port *port;
+	struct acpi_device *iom_adev;
+	void __iomem *iom_base;
+	u32 iom_port_status_offset;
+};
+
+static void update_port_status(struct pmc_usb_port *port)
+{
+	u8 port_num;
+
+	/* SoC expects the USB Type-C port numbers to start with 0 */
+	port_num = port->usb3_port - 1;
+
+	port->iom_status = readl(port->pmc->iom_base +
+				 port->pmc->iom_port_status_offset +
+				 port_num * sizeof(u32));
+}
+
+static int sbu_orientation(struct pmc_usb_port *port)
+{
+	if (port->sbu_orientation)
+		return port->sbu_orientation - 1;
+
+	return port->orientation - 1;
+}
+
+static int hsl_orientation(struct pmc_usb_port *port)
+{
+	if (port->hsl_orientation)
+		return port->hsl_orientation - 1;
+
+	return port->orientation - 1;
+}
+
+static int pmc_usb_send_command(struct intel_scu_ipc_dev *ipc, u8 *msg, u32 len)
+{
+	u8 response[4];
+	u8 status_res;
+	int ret;
+
+	/*
+	 * Error bit will always be 0 with the USBC command.
+	 * Status can be checked from the response message if the
+	 * function intel_scu_ipc_dev_command succeeds.
+	 */
+	ret = intel_scu_ipc_dev_command(ipc, PMC_USBC_CMD, 0, msg,
+					len, response, sizeof(response));
+
+	if (ret)
+		return ret;
+
+	status_res = (msg[0] & 0xf) < PMC_USB_SAFE_MODE ?
+		     response[2] : response[1];
+
+	if (status_res & PMC_USB_RESP_STATUS_FAILURE) {
+		if (status_res & PMC_USB_RESP_STATUS_FATAL)
+			return -EIO;
+
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int pmc_usb_command(struct pmc_usb_port *port, u8 *msg, u32 len)
+{
+	int retry_count = 3;
+	int ret;
+
+	/*
+	 * If PMC is busy then retry the command once again
+	 */
+	while (retry_count--) {
+		ret = pmc_usb_send_command(port->pmc->ipc, msg, len);
+		if (ret != -EBUSY)
+			break;
+	}
+
+	return ret;
+}
+
+static int
+pmc_usb_mux_dp_hpd(struct pmc_usb_port *port, struct typec_displayport_data *dp)
+{
+	u8 msg[2] = { };
+	int ret;
+
+	msg[0] = PMC_USB_DP_HPD;
+	msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
+
+	/* Configure HPD first if HPD,IRQ comes together */
+	if (!IOM_PORT_HPD_ASSERTED(port->iom_status) &&
+	    dp->status & DP_STATUS_IRQ_HPD &&
+	    dp->status & DP_STATUS_HPD_STATE) {
+		msg[1] = PMC_USB_DP_HPD_LVL;
+		ret = pmc_usb_command(port, msg, sizeof(msg));
+		if (ret)
+			return ret;
+	}
+
+	if (dp->status & DP_STATUS_IRQ_HPD)
+		msg[1] = PMC_USB_DP_HPD_IRQ;
+
+	if (dp->status & DP_STATUS_HPD_STATE)
+		msg[1] |= PMC_USB_DP_HPD_LVL;
+
+	return pmc_usb_command(port, msg, sizeof(msg));
+}
+
+static int
+pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
+{
+	struct typec_displayport_data *data = state->data;
+	struct altmode_req req = { };
+	int ret;
+
+	if (IOM_PORT_ACTIVITY_IS(port->iom_status, DP) ||
+	    IOM_PORT_ACTIVITY_IS(port->iom_status, DP_MFD)) {
+		if (IOM_PORT_HPD_ASSERTED(port->iom_status) &&
+		    (!(data->status & DP_STATUS_IRQ_HPD) &&
+		     data->status & DP_STATUS_HPD_STATE))
+			return 0;
+
+		return pmc_usb_mux_dp_hpd(port, state->data);
+	}
+
+	req.usage = PMC_USB_ALT_MODE;
+	req.usage |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
+	req.mode_type = PMC_USB_MODE_TYPE_DP << PMC_USB_MODE_TYPE_SHIFT;
+
+	req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT;
+	req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
+
+	req.mode_data |= (state->mode - TYPEC_STATE_MODAL) <<
+			 PMC_USB_ALTMODE_DP_MODE_SHIFT;
+
+	ret = pmc_usb_command(port, (void *)&req, sizeof(req));
+	if (ret)
+		return ret;
+
+	if (data->status & (DP_STATUS_IRQ_HPD | DP_STATUS_HPD_STATE))
+		return pmc_usb_mux_dp_hpd(port, state->data);
+
+	return 0;
+}
+
+static int
+pmc_usb_mux_tbt(struct pmc_usb_port *port, struct typec_mux_state *state)
+{
+	struct typec_thunderbolt_data *data = state->data;
+	u8 cable_rounded = TBT_CABLE_ROUNDED_SUPPORT(data->cable_mode);
+	u8 cable_speed = TBT_CABLE_SPEED(data->cable_mode);
+	struct altmode_req req = { };
+
+	if (IOM_PORT_ACTIVITY_IS(port->iom_status, TBT) ||
+	    IOM_PORT_ACTIVITY_IS(port->iom_status, ALT_MODE_TBT_USB))
+		return 0;
+
+	req.usage = PMC_USB_ALT_MODE;
+	req.usage |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
+	req.mode_type = PMC_USB_MODE_TYPE_TBT << PMC_USB_MODE_TYPE_SHIFT;
+
+	req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT;
+	req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
+
+	if (TBT_ADAPTER(data->device_mode) == TBT_ADAPTER_TBT3)
+		req.mode_data |= PMC_USB_ALTMODE_TBT_TYPE;
+
+	if (data->cable_mode & TBT_CABLE_OPTICAL)
+		req.mode_data |= PMC_USB_ALTMODE_CABLE_TYPE;
+
+	if (data->cable_mode & TBT_CABLE_LINK_TRAINING)
+		req.mode_data |= PMC_USB_ALTMODE_ACTIVE_LINK;
+
+	if (data->enter_vdo & TBT_ENTER_MODE_ACTIVE_CABLE)
+		req.mode_data |= PMC_USB_ALTMODE_ACTIVE_CABLE;
+
+	req.mode_data |= PMC_USB_ALTMODE_CABLE_SPD(cable_speed);
+
+	req.mode_data |= PMC_USB_ALTMODE_TBT_GEN(cable_rounded);
+
+	return pmc_usb_command(port, (void *)&req, sizeof(req));
+}
+
+static int
+pmc_usb_mux_usb4(struct pmc_usb_port *port, struct typec_mux_state *state)
+{
+	struct enter_usb_data *data = state->data;
+	struct altmode_req req = { };
+	u8 cable_speed;
+
+	if (IOM_PORT_ACTIVITY_IS(port->iom_status, TBT) ||
+	    IOM_PORT_ACTIVITY_IS(port->iom_status, ALT_MODE_TBT_USB))
+		return 0;
+
+	req.usage = PMC_USB_ALT_MODE;
+	req.usage |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
+	req.mode_type = PMC_USB_MODE_TYPE_TBT << PMC_USB_MODE_TYPE_SHIFT;
+
+	/* USB4 Mode */
+	req.mode_data = PMC_USB_ALTMODE_FORCE_LSR;
+
+	if (data->active_link_training)
+		req.mode_data |= PMC_USB_ALTMODE_ACTIVE_LINK;
+
+	req.mode_data |= (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT;
+	req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
+
+	switch ((data->eudo & EUDO_CABLE_TYPE_MASK) >> EUDO_CABLE_TYPE_SHIFT) {
+	case EUDO_CABLE_TYPE_PASSIVE:
+		break;
+	case EUDO_CABLE_TYPE_OPTICAL:
+		req.mode_data |= PMC_USB_ALTMODE_CABLE_TYPE;
+		fallthrough;
+	default:
+		req.mode_data |= PMC_USB_ALTMODE_ACTIVE_CABLE;
+
+		/* Configure data rate to rounded in the case of Active TBT3
+		 * and USB4 cables.
+		 */
+		req.mode_data |= PMC_USB_ALTMODE_TBT_GEN(1);
+		break;
+	}
+
+	cable_speed = (data->eudo & EUDO_CABLE_SPEED_MASK) >> EUDO_CABLE_SPEED_SHIFT;
+	req.mode_data |= PMC_USB_ALTMODE_CABLE_SPD(cable_speed);
+
+	return pmc_usb_command(port, (void *)&req, sizeof(req));
+}
+
+static int pmc_usb_mux_safe_state(struct pmc_usb_port *port,
+				  struct typec_mux_state *state)
+{
+	u8 msg;
+
+	if (IOM_PORT_ACTIVITY_IS(port->iom_status, SAFE_MODE))
+		return 0;
+
+	if ((IOM_PORT_ACTIVITY_IS(port->iom_status, DP) ||
+	     IOM_PORT_ACTIVITY_IS(port->iom_status, DP_MFD)) &&
+	     state->alt && state->alt->svid == USB_TYPEC_DP_SID)
+		return 0;
+
+	if ((IOM_PORT_ACTIVITY_IS(port->iom_status, TBT) ||
+	     IOM_PORT_ACTIVITY_IS(port->iom_status, ALT_MODE_TBT_USB)) &&
+	     state->alt && state->alt->svid == USB_TYPEC_TBT_SID)
+		return 0;
+
+	msg = PMC_USB_SAFE_MODE;
+	msg |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
+
+	return pmc_usb_command(port, &msg, sizeof(msg));
+}
+
+static int pmc_usb_disconnect(struct pmc_usb_port *port)
+{
+	struct typec_displayport_data data = { };
+	u8 msg[2];
+
+	if (!(port->iom_status & IOM_PORT_STATUS_CONNECTED))
+		return 0;
+
+	/* Clear DisplayPort HPD if it's still asserted. */
+	if (IOM_PORT_HPD_ASSERTED(port->iom_status))
+		pmc_usb_mux_dp_hpd(port, &data);
+
+	msg[0] = PMC_USB_DISCONNECT;
+	msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
+
+	msg[1] = port->usb2_port << PMC_USB_MSG_USB2_PORT_SHIFT;
+
+	return pmc_usb_command(port, msg, sizeof(msg));
+}
+
+static int pmc_usb_connect(struct pmc_usb_port *port, enum usb_role role)
+{
+	u8 ufp = role == USB_ROLE_DEVICE ? 1 : 0;
+	u8 msg[2];
+	int ret;
+
+	if (port->orientation == TYPEC_ORIENTATION_NONE)
+		return -EINVAL;
+
+	if (port->iom_status & IOM_PORT_STATUS_CONNECTED) {
+		if (port->role == role || port->role == USB_ROLE_NONE)
+			return 0;
+
+		/* Role swap */
+		ret = pmc_usb_disconnect(port);
+		if (ret)
+			return ret;
+	}
+
+	msg[0] = PMC_USB_CONNECT;
+	msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
+
+	msg[1] = port->usb2_port << PMC_USB_MSG_USB2_PORT_SHIFT;
+	msg[1] |= ufp << PMC_USB_MSG_UFP_SHIFT;
+	msg[1] |= hsl_orientation(port) << PMC_USB_MSG_ORI_HSL_SHIFT;
+	msg[1] |= sbu_orientation(port) << PMC_USB_MSG_ORI_AUX_SHIFT;
+
+	return pmc_usb_command(port, msg, sizeof(msg));
+}
+
+static int
+pmc_usb_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
+{
+	struct pmc_usb_port *port = typec_mux_get_drvdata(mux);
+
+	update_port_status(port);
+
+	if (port->orientation == TYPEC_ORIENTATION_NONE || port->role == USB_ROLE_NONE)
+		return 0;
+
+	if (state->mode == TYPEC_STATE_SAFE)
+		return pmc_usb_mux_safe_state(port, state);
+	if (state->mode == TYPEC_STATE_USB)
+		return pmc_usb_connect(port, port->role);
+
+	if (state->alt) {
+		switch (state->alt->svid) {
+		case USB_TYPEC_TBT_SID:
+			return pmc_usb_mux_tbt(port, state);
+		case USB_TYPEC_DP_SID:
+			return pmc_usb_mux_dp(port, state);
+		}
+	} else {
+		switch (state->mode) {
+		case TYPEC_MODE_USB2:
+			/* REVISIT: Try with usb3_port set to 0? */
+			break;
+		case TYPEC_MODE_USB3:
+			return pmc_usb_connect(port, port->role);
+		case TYPEC_MODE_USB4:
+			return pmc_usb_mux_usb4(port, state);
+		}
+	}
+
+	return -EOPNOTSUPP;
+}
+
+static int pmc_usb_set_orientation(struct typec_switch_dev *sw,
+				   enum typec_orientation orientation)
+{
+	struct pmc_usb_port *port = typec_switch_get_drvdata(sw);
+
+	update_port_status(port);
+
+	port->orientation = orientation;
+
+	return 0;
+}
+
+static int pmc_usb_set_role(struct usb_role_switch *sw, enum usb_role role)
+{
+	struct pmc_usb_port *port = usb_role_switch_get_drvdata(sw);
+	int ret;
+
+	update_port_status(port);
+
+	if (role == USB_ROLE_NONE)
+		ret = pmc_usb_disconnect(port);
+	else
+		ret = pmc_usb_connect(port, role);
+
+	port->role = role;
+
+	return ret;
+}
+
+static int pmc_usb_register_port(struct pmc_usb *pmc, int index,
+				 struct fwnode_handle *fwnode)
+{
+	struct pmc_usb_port *port = &pmc->port[index];
+	struct usb_role_switch_desc desc = { };
+	struct typec_switch_desc sw_desc = { };
+	struct typec_mux_desc mux_desc = { };
+	const char *str;
+	int ret;
+
+	ret = fwnode_property_read_u8(fwnode, "usb2-port-number", &port->usb2_port);
+	if (ret)
+		return ret;
+
+	ret = fwnode_property_read_u8(fwnode, "usb3-port-number", &port->usb3_port);
+	if (ret)
+		return ret;
+
+	ret = fwnode_property_read_string(fwnode, "sbu-orientation", &str);
+	if (!ret)
+		port->sbu_orientation = typec_find_orientation(str);
+
+	ret = fwnode_property_read_string(fwnode, "hsl-orientation", &str);
+	if (!ret)
+		port->hsl_orientation = typec_find_orientation(str);
+
+	port->num = index;
+	port->pmc = pmc;
+
+	sw_desc.fwnode = fwnode;
+	sw_desc.drvdata = port;
+	sw_desc.name = fwnode_get_name(fwnode);
+	sw_desc.set = pmc_usb_set_orientation;
+
+	port->typec_sw = typec_switch_register(pmc->dev, &sw_desc);
+	if (IS_ERR(port->typec_sw))
+		return PTR_ERR(port->typec_sw);
+
+	mux_desc.fwnode = fwnode;
+	mux_desc.drvdata = port;
+	mux_desc.name = fwnode_get_name(fwnode);
+	mux_desc.set = pmc_usb_mux_set;
+
+	port->typec_mux = typec_mux_register(pmc->dev, &mux_desc);
+	if (IS_ERR(port->typec_mux)) {
+		ret = PTR_ERR(port->typec_mux);
+		goto err_unregister_switch;
+	}
+
+	desc.fwnode = fwnode;
+	desc.driver_data = port;
+	desc.name = fwnode_get_name(fwnode);
+	desc.set = pmc_usb_set_role;
+
+	port->usb_sw = usb_role_switch_register(pmc->dev, &desc);
+	if (IS_ERR(port->usb_sw)) {
+		ret = PTR_ERR(port->usb_sw);
+		goto err_unregister_mux;
+	}
+
+	return 0;
+
+err_unregister_mux:
+	typec_mux_unregister(port->typec_mux);
+
+err_unregister_switch:
+	typec_switch_unregister(port->typec_sw);
+
+	return ret;
+}
+
+/* IOM ACPI IDs and IOM_PORT_STATUS_OFFSET */
+static const struct acpi_device_id iom_acpi_ids[] = {
+	/* TigerLake */
+	{ "INTC1072", 0x560, },
+
+	/* AlderLake */
+	{ "INTC1079", 0x160, },
+
+	/* Meteor Lake */
+	{ "INTC107A", 0x160, },
+	{}
+};
+
+static int pmc_usb_probe_iom(struct pmc_usb *pmc)
+{
+	struct list_head resource_list;
+	struct resource_entry *rentry;
+	static const struct acpi_device_id *dev_id;
+	struct acpi_device *adev = NULL;
+	int ret;
+
+	for (dev_id = &iom_acpi_ids[0]; dev_id->id[0]; dev_id++) {
+		if (acpi_dev_present(dev_id->id, NULL, -1)) {
+			pmc->iom_port_status_offset = (u32)dev_id->driver_data;
+			adev = acpi_dev_get_first_match_dev(dev_id->id, NULL, -1);
+			break;
+		}
+	}
+
+	if (!adev)
+		return -ENODEV;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_memory_resources(adev, &resource_list);
+	if (ret < 0) {
+		acpi_dev_put(adev);
+		return ret;
+	}
+
+	rentry = list_first_entry_or_null(&resource_list, struct resource_entry, node);
+	if (rentry)
+		pmc->iom_base = devm_ioremap_resource(pmc->dev, rentry->res);
+
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (!pmc->iom_base) {
+		acpi_dev_put(adev);
+		return -ENOMEM;
+	}
+
+	if (IS_ERR(pmc->iom_base)) {
+		acpi_dev_put(adev);
+		return PTR_ERR(pmc->iom_base);
+	}
+
+	pmc->iom_adev = adev;
+
+	return 0;
+}
+
+static int pmc_usb_probe(struct platform_device *pdev)
+{
+	struct fwnode_handle *fwnode = NULL;
+	struct pmc_usb *pmc;
+	int i = 0;
+	int ret;
+
+	pmc = devm_kzalloc(&pdev->dev, sizeof(*pmc), GFP_KERNEL);
+	if (!pmc)
+		return -ENOMEM;
+
+	device_for_each_child_node(&pdev->dev, fwnode)
+		pmc->num_ports++;
+
+	/* The IOM microcontroller has a limitation of max 4 ports. */
+	if (pmc->num_ports > 4) {
+		dev_err(&pdev->dev, "driver limited to 4 ports\n");
+		return -ERANGE;
+	}
+
+	pmc->port = devm_kcalloc(&pdev->dev, pmc->num_ports,
+				 sizeof(struct pmc_usb_port), GFP_KERNEL);
+	if (!pmc->port)
+		return -ENOMEM;
+
+	pmc->ipc = devm_intel_scu_ipc_dev_get(&pdev->dev);
+	if (!pmc->ipc)
+		return -ENODEV;
+
+	pmc->dev = &pdev->dev;
+
+	ret = pmc_usb_probe_iom(pmc);
+	if (ret)
+		return ret;
+
+	/*
+	 * For every physical USB connector (USB2 and USB3 combo) there is a
+	 * child ACPI device node under the PMC mux ACPI device object.
+	 */
+	for (i = 0; i < pmc->num_ports; i++) {
+		fwnode = device_get_next_child_node(pmc->dev, fwnode);
+		if (!fwnode)
+			break;
+
+		ret = pmc_usb_register_port(pmc, i, fwnode);
+		if (ret) {
+			fwnode_handle_put(fwnode);
+			goto err_remove_ports;
+		}
+	}
+
+	platform_set_drvdata(pdev, pmc);
+
+	return 0;
+
+err_remove_ports:
+	for (i = 0; i < pmc->num_ports; i++) {
+		typec_switch_unregister(pmc->port[i].typec_sw);
+		typec_mux_unregister(pmc->port[i].typec_mux);
+		usb_role_switch_unregister(pmc->port[i].usb_sw);
+	}
+
+	acpi_dev_put(pmc->iom_adev);
+
+	return ret;
+}
+
+static int pmc_usb_remove(struct platform_device *pdev)
+{
+	struct pmc_usb *pmc = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < pmc->num_ports; i++) {
+		typec_switch_unregister(pmc->port[i].typec_sw);
+		typec_mux_unregister(pmc->port[i].typec_mux);
+		usb_role_switch_unregister(pmc->port[i].usb_sw);
+	}
+
+	acpi_dev_put(pmc->iom_adev);
+
+	return 0;
+}
+
+static const struct acpi_device_id pmc_usb_acpi_ids[] = {
+	{ "INTC105C", },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, pmc_usb_acpi_ids);
+
+static struct platform_driver pmc_usb_driver = {
+	.driver = {
+		.name = "intel_pmc_usb",
+		.acpi_match_table = ACPI_PTR(pmc_usb_acpi_ids),
+	},
+	.probe = pmc_usb_probe,
+	.remove = pmc_usb_remove,
+};
+
+module_platform_driver(pmc_usb_driver);
+
+MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel PMC USB mux control");
diff --git a/drivers/usb/typec/mux/pi3usb30532.c b/drivers/usb/typec/mux/pi3usb30532.c
new file mode 100644
index 000000000..1cd388b55
--- /dev/null
+++ b/drivers/usb/typec/mux/pi3usb30532.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Pericom PI3USB30532 Type-C cross switch / mux driver
+ *
+ * Copyright (c) 2017-2018 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
+
+#define PI3USB30532_CONF			0x00
+
+#define PI3USB30532_CONF_OPEN			0x00
+#define PI3USB30532_CONF_SWAP			0x01
+#define PI3USB30532_CONF_4LANE_DP		0x02
+#define PI3USB30532_CONF_USB3			0x04
+#define PI3USB30532_CONF_USB3_AND_2LANE_DP	0x06
+
+struct pi3usb30532 {
+	struct i2c_client *client;
+	struct mutex lock; /* protects the cached conf register */
+	struct typec_switch_dev *sw;
+	struct typec_mux_dev *mux;
+	u8 conf;
+};
+
+static int pi3usb30532_set_conf(struct pi3usb30532 *pi, u8 new_conf)
+{
+	int ret = 0;
+
+	if (pi->conf == new_conf)
+		return 0;
+
+	ret = i2c_smbus_write_byte_data(pi->client, PI3USB30532_CONF, new_conf);
+	if (ret) {
+		dev_err(&pi->client->dev, "Error writing conf: %d\n", ret);
+		return ret;
+	}
+
+	pi->conf = new_conf;
+	return 0;
+}
+
+static int pi3usb30532_sw_set(struct typec_switch_dev *sw,
+			      enum typec_orientation orientation)
+{
+	struct pi3usb30532 *pi = typec_switch_get_drvdata(sw);
+	u8 new_conf;
+	int ret;
+
+	mutex_lock(&pi->lock);
+	new_conf = pi->conf;
+
+	switch (orientation) {
+	case TYPEC_ORIENTATION_NONE:
+		new_conf = PI3USB30532_CONF_OPEN;
+		break;
+	case TYPEC_ORIENTATION_NORMAL:
+		new_conf &= ~PI3USB30532_CONF_SWAP;
+		break;
+	case TYPEC_ORIENTATION_REVERSE:
+		new_conf |= PI3USB30532_CONF_SWAP;
+		break;
+	}
+
+	ret = pi3usb30532_set_conf(pi, new_conf);
+	mutex_unlock(&pi->lock);
+
+	return ret;
+}
+
+static int
+pi3usb30532_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
+{
+	struct pi3usb30532 *pi = typec_mux_get_drvdata(mux);
+	u8 new_conf;
+	int ret;
+
+	mutex_lock(&pi->lock);
+	new_conf = pi->conf;
+
+	switch (state->mode) {
+	case TYPEC_STATE_SAFE:
+		new_conf = (new_conf & PI3USB30532_CONF_SWAP) |
+			   PI3USB30532_CONF_OPEN;
+		break;
+	case TYPEC_STATE_USB:
+		new_conf = (new_conf & PI3USB30532_CONF_SWAP) |
+			   PI3USB30532_CONF_USB3;
+		break;
+	case TYPEC_DP_STATE_C:
+	case TYPEC_DP_STATE_E:
+		new_conf = (new_conf & PI3USB30532_CONF_SWAP) |
+			   PI3USB30532_CONF_4LANE_DP;
+		break;
+	case TYPEC_DP_STATE_D:
+		new_conf = (new_conf & PI3USB30532_CONF_SWAP) |
+			   PI3USB30532_CONF_USB3_AND_2LANE_DP;
+		break;
+	default:
+		break;
+	}
+
+	ret = pi3usb30532_set_conf(pi, new_conf);
+	mutex_unlock(&pi->lock);
+
+	return ret;
+}
+
+static int pi3usb30532_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct typec_switch_desc sw_desc = { };
+	struct typec_mux_desc mux_desc = { };
+	struct pi3usb30532 *pi;
+	int ret;
+
+	pi = devm_kzalloc(dev, sizeof(*pi), GFP_KERNEL);
+	if (!pi)
+		return -ENOMEM;
+
+	pi->client = client;
+	mutex_init(&pi->lock);
+
+	ret = i2c_smbus_read_byte_data(client, PI3USB30532_CONF);
+	if (ret < 0) {
+		dev_err(dev, "Error reading config register %d\n", ret);
+		return ret;
+	}
+	pi->conf = ret;
+
+	sw_desc.drvdata = pi;
+	sw_desc.fwnode = dev->fwnode;
+	sw_desc.set = pi3usb30532_sw_set;
+
+	pi->sw = typec_switch_register(dev, &sw_desc);
+	if (IS_ERR(pi->sw)) {
+		dev_err(dev, "Error registering typec switch: %ld\n",
+			PTR_ERR(pi->sw));
+		return PTR_ERR(pi->sw);
+	}
+
+	mux_desc.drvdata = pi;
+	mux_desc.fwnode = dev->fwnode;
+	mux_desc.set = pi3usb30532_mux_set;
+
+	pi->mux = typec_mux_register(dev, &mux_desc);
+	if (IS_ERR(pi->mux)) {
+		typec_switch_unregister(pi->sw);
+		dev_err(dev, "Error registering typec mux: %ld\n",
+			PTR_ERR(pi->mux));
+		return PTR_ERR(pi->mux);
+	}
+
+	i2c_set_clientdata(client, pi);
+	return 0;
+}
+
+static void pi3usb30532_remove(struct i2c_client *client)
+{
+	struct pi3usb30532 *pi = i2c_get_clientdata(client);
+
+	typec_mux_unregister(pi->mux);
+	typec_switch_unregister(pi->sw);
+}
+
+static const struct i2c_device_id pi3usb30532_table[] = {
+	{ "pi3usb30532" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pi3usb30532_table);
+
+static struct i2c_driver pi3usb30532_driver = {
+	.driver = {
+		.name = "pi3usb30532",
+	},
+	.probe_new	= pi3usb30532_probe,
+	.remove		= pi3usb30532_remove,
+	.id_table	= pi3usb30532_table,
+};
+
+module_i2c_driver(pi3usb30532_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Pericom PI3USB30532 Type-C mux driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/typec/pd.c b/drivers/usb/typec/pd.c
new file mode 100644
index 000000000..fd2477161
--- /dev/null
+++ b/drivers/usb/typec/pd.c
@@ -0,0 +1,707 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Power Delivery sysfs entries
+ *
+ * Copyright (C) 2022, Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/slab.h>
+#include <linux/usb/pd.h>
+
+#include "pd.h"
+
+static DEFINE_IDA(pd_ida);
+
+static struct class pd_class = {
+	.name = "usb_power_delivery",
+	.owner = THIS_MODULE,
+};
+
+#define to_pdo(o) container_of(o, struct pdo, dev)
+
+struct pdo {
+	struct device dev;
+	int object_position;
+	u32 pdo;
+};
+
+static void pdo_release(struct device *dev)
+{
+	kfree(to_pdo(dev));
+}
+
+/* -------------------------------------------------------------------------- */
+/* Fixed Supply */
+
+static ssize_t
+dual_role_power_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%u\n", !!(to_pdo(dev)->pdo & PDO_FIXED_DUAL_ROLE));
+}
+static DEVICE_ATTR_RO(dual_role_power);
+
+static ssize_t
+usb_suspend_supported_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%u\n", !!(to_pdo(dev)->pdo & PDO_FIXED_SUSPEND));
+}
+static DEVICE_ATTR_RO(usb_suspend_supported);
+
+static ssize_t
+unconstrained_power_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%u\n", !!(to_pdo(dev)->pdo & PDO_FIXED_EXTPOWER));
+}
+static DEVICE_ATTR_RO(unconstrained_power);
+
+static ssize_t
+usb_communication_capable_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%u\n", !!(to_pdo(dev)->pdo & PDO_FIXED_USB_COMM));
+}
+static DEVICE_ATTR_RO(usb_communication_capable);
+
+static ssize_t
+dual_role_data_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%u\n", !!(to_pdo(dev)->pdo & PDO_FIXED_DATA_SWAP));
+}
+static DEVICE_ATTR_RO(dual_role_data);
+
+static ssize_t
+unchunked_extended_messages_supported_show(struct device *dev,
+					   struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%u\n", !!(to_pdo(dev)->pdo & PDO_FIXED_UNCHUNK_EXT));
+}
+static DEVICE_ATTR_RO(unchunked_extended_messages_supported);
+
+/*
+ * REVISIT: Peak Current requires access also to the RDO.
+static ssize_t
+peak_current_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	...
+}
+*/
+
+static ssize_t
+fast_role_swap_current_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%u\n", (to_pdo(dev)->pdo >> PDO_FIXED_FRS_CURR_SHIFT) & 3);
+}
+static DEVICE_ATTR_RO(fast_role_swap_current);
+
+static ssize_t voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%umV\n", pdo_fixed_voltage(to_pdo(dev)->pdo));
+}
+static DEVICE_ATTR_RO(voltage);
+
+/* Shared with Variable supplies, both source and sink */
+static ssize_t current_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%umA\n", pdo_max_current(to_pdo(dev)->pdo));
+}
+
+/* Shared with Variable type supplies */
+static struct device_attribute maximum_current_attr = {
+	.attr = {
+		.name = "maximum_current",
+		.mode = 0444,
+	},
+	.show = current_show,
+};
+
+static struct device_attribute operational_current_attr = {
+	.attr = {
+		.name = "operational_current",
+		.mode = 0444,
+	},
+	.show = current_show,
+};
+
+static struct attribute *source_fixed_supply_attrs[] = {
+	&dev_attr_dual_role_power.attr,
+	&dev_attr_usb_suspend_supported.attr,
+	&dev_attr_unconstrained_power.attr,
+	&dev_attr_usb_communication_capable.attr,
+	&dev_attr_dual_role_data.attr,
+	&dev_attr_unchunked_extended_messages_supported.attr,
+	/*&dev_attr_peak_current.attr,*/
+	&dev_attr_voltage.attr,
+	&maximum_current_attr.attr,
+	NULL
+};
+
+static umode_t fixed_attr_is_visible(struct kobject *kobj, struct attribute *attr, int n)
+{
+	if (to_pdo(kobj_to_dev(kobj))->object_position &&
+	    /*attr != &dev_attr_peak_current.attr &&*/
+	    attr != &dev_attr_voltage.attr &&
+	    attr != &maximum_current_attr.attr &&
+	    attr != &operational_current_attr.attr)
+		return 0;
+
+	return attr->mode;
+}
+
+static const struct attribute_group source_fixed_supply_group = {
+	.is_visible = fixed_attr_is_visible,
+	.attrs = source_fixed_supply_attrs,
+};
+__ATTRIBUTE_GROUPS(source_fixed_supply);
+
+static struct device_type source_fixed_supply_type = {
+	.name = "pdo",
+	.release = pdo_release,
+	.groups = source_fixed_supply_groups,
+};
+
+static struct attribute *sink_fixed_supply_attrs[] = {
+	&dev_attr_dual_role_power.attr,
+	&dev_attr_unconstrained_power.attr,
+	&dev_attr_usb_communication_capable.attr,
+	&dev_attr_dual_role_data.attr,
+	&dev_attr_unchunked_extended_messages_supported.attr,
+	&dev_attr_fast_role_swap_current.attr,
+	&dev_attr_voltage.attr,
+	&operational_current_attr.attr,
+	NULL
+};
+
+static const struct attribute_group sink_fixed_supply_group = {
+	.is_visible = fixed_attr_is_visible,
+	.attrs = sink_fixed_supply_attrs,
+};
+__ATTRIBUTE_GROUPS(sink_fixed_supply);
+
+static struct device_type sink_fixed_supply_type = {
+	.name = "pdo",
+	.release = pdo_release,
+	.groups = sink_fixed_supply_groups,
+};
+
+/* -------------------------------------------------------------------------- */
+/* Variable Supply */
+
+static ssize_t
+maximum_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%umV\n", pdo_max_voltage(to_pdo(dev)->pdo));
+}
+static DEVICE_ATTR_RO(maximum_voltage);
+
+static ssize_t
+minimum_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%umV\n", pdo_min_voltage(to_pdo(dev)->pdo));
+}
+static DEVICE_ATTR_RO(minimum_voltage);
+
+static struct attribute *source_variable_supply_attrs[] = {
+	&dev_attr_maximum_voltage.attr,
+	&dev_attr_minimum_voltage.attr,
+	&maximum_current_attr.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(source_variable_supply);
+
+static struct device_type source_variable_supply_type = {
+	.name = "pdo",
+	.release = pdo_release,
+	.groups = source_variable_supply_groups,
+};
+
+static struct attribute *sink_variable_supply_attrs[] = {
+	&dev_attr_maximum_voltage.attr,
+	&dev_attr_minimum_voltage.attr,
+	&operational_current_attr.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(sink_variable_supply);
+
+static struct device_type sink_variable_supply_type = {
+	.name = "pdo",
+	.release = pdo_release,
+	.groups = sink_variable_supply_groups,
+};
+
+/* -------------------------------------------------------------------------- */
+/* Battery */
+
+static ssize_t
+maximum_power_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%umW\n", pdo_max_power(to_pdo(dev)->pdo));
+}
+static DEVICE_ATTR_RO(maximum_power);
+
+static ssize_t
+operational_power_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%umW\n", pdo_max_power(to_pdo(dev)->pdo));
+}
+static DEVICE_ATTR_RO(operational_power);
+
+static struct attribute *source_battery_attrs[] = {
+	&dev_attr_maximum_voltage.attr,
+	&dev_attr_minimum_voltage.attr,
+	&dev_attr_maximum_power.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(source_battery);
+
+static struct device_type source_battery_type = {
+	.name = "pdo",
+	.release = pdo_release,
+	.groups = source_battery_groups,
+};
+
+static struct attribute *sink_battery_attrs[] = {
+	&dev_attr_maximum_voltage.attr,
+	&dev_attr_minimum_voltage.attr,
+	&dev_attr_operational_power.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(sink_battery);
+
+static struct device_type sink_battery_type = {
+	.name = "pdo",
+	.release = pdo_release,
+	.groups = sink_battery_groups,
+};
+
+/* -------------------------------------------------------------------------- */
+/* Standard Power Range (SPR) Programmable Power Supply (PPS) */
+
+static ssize_t
+pps_power_limited_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%u\n", !!(to_pdo(dev)->pdo & BIT(27)));
+}
+static DEVICE_ATTR_RO(pps_power_limited);
+
+static ssize_t
+pps_max_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%umV\n", pdo_pps_apdo_max_voltage(to_pdo(dev)->pdo));
+}
+
+static ssize_t
+pps_min_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%umV\n", pdo_pps_apdo_min_voltage(to_pdo(dev)->pdo));
+}
+
+static ssize_t
+pps_max_current_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%umA\n", pdo_pps_apdo_max_current(to_pdo(dev)->pdo));
+}
+
+static struct device_attribute pps_max_voltage_attr = {
+	.attr = {
+		.name = "maximum_voltage",
+		.mode = 0444,
+	},
+	.show = pps_max_voltage_show,
+};
+
+static struct device_attribute pps_min_voltage_attr = {
+	.attr = {
+		.name = "minimum_voltage",
+		.mode = 0444,
+	},
+	.show = pps_min_voltage_show,
+};
+
+static struct device_attribute pps_max_current_attr = {
+	.attr = {
+		.name = "maximum_current",
+		.mode = 0444,
+	},
+	.show = pps_max_current_show,
+};
+
+static struct attribute *source_pps_attrs[] = {
+	&dev_attr_pps_power_limited.attr,
+	&pps_max_voltage_attr.attr,
+	&pps_min_voltage_attr.attr,
+	&pps_max_current_attr.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(source_pps);
+
+static struct device_type source_pps_type = {
+	.name = "pdo",
+	.release = pdo_release,
+	.groups = source_pps_groups,
+};
+
+static struct attribute *sink_pps_attrs[] = {
+	&pps_max_voltage_attr.attr,
+	&pps_min_voltage_attr.attr,
+	&pps_max_current_attr.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(sink_pps);
+
+static struct device_type sink_pps_type = {
+	.name = "pdo",
+	.release = pdo_release,
+	.groups = sink_pps_groups,
+};
+
+/* -------------------------------------------------------------------------- */
+
+static const char * const supply_name[] = {
+	[PDO_TYPE_FIXED] = "fixed_supply",
+	[PDO_TYPE_BATT]  = "battery",
+	[PDO_TYPE_VAR]	 = "variable_supply",
+};
+
+static const char * const apdo_supply_name[] = {
+	[APDO_TYPE_PPS]  = "programmable_supply",
+};
+
+static struct device_type *source_type[] = {
+	[PDO_TYPE_FIXED] = &source_fixed_supply_type,
+	[PDO_TYPE_BATT]  = &source_battery_type,
+	[PDO_TYPE_VAR]   = &source_variable_supply_type,
+};
+
+static struct device_type *source_apdo_type[] = {
+	[APDO_TYPE_PPS]  = &source_pps_type,
+};
+
+static struct device_type *sink_type[] = {
+	[PDO_TYPE_FIXED] = &sink_fixed_supply_type,
+	[PDO_TYPE_BATT]  = &sink_battery_type,
+	[PDO_TYPE_VAR]   = &sink_variable_supply_type,
+};
+
+static struct device_type *sink_apdo_type[] = {
+	[APDO_TYPE_PPS]  = &sink_pps_type,
+};
+
+/* REVISIT: Export when EPR_*_Capabilities need to be supported. */
+static int add_pdo(struct usb_power_delivery_capabilities *cap, u32 pdo, int position)
+{
+	struct device_type *type;
+	const char *name;
+	struct pdo *p;
+	int ret;
+
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	p->pdo = pdo;
+	p->object_position = position;
+
+	if (pdo_type(pdo) == PDO_TYPE_APDO) {
+		/* FIXME: Only PPS supported for now! Skipping others. */
+		if (pdo_apdo_type(pdo) > APDO_TYPE_PPS) {
+			dev_warn(&cap->dev, "Unknown APDO type. PDO 0x%08x\n", pdo);
+			kfree(p);
+			return 0;
+		}
+
+		if (is_source(cap->role))
+			type = source_apdo_type[pdo_apdo_type(pdo)];
+		else
+			type = sink_apdo_type[pdo_apdo_type(pdo)];
+
+		name = apdo_supply_name[pdo_apdo_type(pdo)];
+	} else {
+		if (is_source(cap->role))
+			type = source_type[pdo_type(pdo)];
+		else
+			type = sink_type[pdo_type(pdo)];
+
+		name = supply_name[pdo_type(pdo)];
+	}
+
+	p->dev.parent = &cap->dev;
+	p->dev.type = type;
+	dev_set_name(&p->dev, "%u:%s", position + 1, name);
+
+	ret = device_register(&p->dev);
+	if (ret) {
+		put_device(&p->dev);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int remove_pdo(struct device *dev, void *data)
+{
+	device_unregister(dev);
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static const char * const cap_name[] = {
+	[TYPEC_SINK]    = "sink-capabilities",
+	[TYPEC_SOURCE]  = "source-capabilities",
+};
+
+static void pd_capabilities_release(struct device *dev)
+{
+	kfree(to_usb_power_delivery_capabilities(dev));
+}
+
+static struct device_type pd_capabilities_type = {
+	.name = "capabilities",
+	.release = pd_capabilities_release,
+};
+
+/**
+ * usb_power_delivery_register_capabilities - Register a set of capabilities.
+ * @pd: The USB PD instance that the capabilities belong to.
+ * @desc: Description of the Capablities Message.
+ *
+ * This function registers a Capabilities Message described in @desc. The
+ * capabilities will have their own sub-directory under @pd in sysfs.
+ *
+ * The function returns pointer to struct usb_power_delivery_capabilities, or
+ * ERR_PRT(errno).
+ */
+struct usb_power_delivery_capabilities *
+usb_power_delivery_register_capabilities(struct usb_power_delivery *pd,
+					 struct usb_power_delivery_capabilities_desc *desc)
+{
+	struct usb_power_delivery_capabilities *cap;
+	int ret;
+	int i;
+
+	cap = kzalloc(sizeof(*cap), GFP_KERNEL);
+	if (!cap)
+		return ERR_PTR(-ENOMEM);
+
+	cap->pd = pd;
+	cap->role = desc->role;
+
+	cap->dev.parent = &pd->dev;
+	cap->dev.type = &pd_capabilities_type;
+	dev_set_name(&cap->dev, "%s", cap_name[cap->role]);
+
+	ret = device_register(&cap->dev);
+	if (ret) {
+		put_device(&cap->dev);
+		return ERR_PTR(ret);
+	}
+
+	for (i = 0; i < PDO_MAX_OBJECTS && desc->pdo[i]; i++) {
+		ret = add_pdo(cap, desc->pdo[i], i);
+		if (ret) {
+			usb_power_delivery_unregister_capabilities(cap);
+			return ERR_PTR(ret);
+		}
+	}
+
+	return cap;
+}
+EXPORT_SYMBOL_GPL(usb_power_delivery_register_capabilities);
+
+/**
+ * usb_power_delivery_unregister_capabilities - Unregister a set of capabilities
+ * @cap: The capabilities
+ */
+void usb_power_delivery_unregister_capabilities(struct usb_power_delivery_capabilities *cap)
+{
+	if (!cap)
+		return;
+
+	device_for_each_child(&cap->dev, NULL, remove_pdo);
+	device_unregister(&cap->dev);
+}
+EXPORT_SYMBOL_GPL(usb_power_delivery_unregister_capabilities);
+
+/* -------------------------------------------------------------------------- */
+
+static ssize_t revision_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct usb_power_delivery *pd = to_usb_power_delivery(dev);
+
+	return sysfs_emit(buf, "%u.%u\n", (pd->revision >> 8) & 0xff, (pd->revision >> 4) & 0xf);
+}
+static DEVICE_ATTR_RO(revision);
+
+static ssize_t version_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct usb_power_delivery *pd = to_usb_power_delivery(dev);
+
+	return sysfs_emit(buf, "%u.%u\n", (pd->version >> 8) & 0xff, (pd->version >> 4) & 0xf);
+}
+static DEVICE_ATTR_RO(version);
+
+static struct attribute *pd_attrs[] = {
+	&dev_attr_revision.attr,
+	&dev_attr_version.attr,
+	NULL
+};
+
+static umode_t pd_attr_is_visible(struct kobject *kobj, struct attribute *attr, int n)
+{
+	struct usb_power_delivery *pd = to_usb_power_delivery(kobj_to_dev(kobj));
+
+	if (attr == &dev_attr_version.attr && !pd->version)
+		return 0;
+
+	return attr->mode;
+}
+
+static const struct attribute_group pd_group = {
+	.is_visible = pd_attr_is_visible,
+	.attrs = pd_attrs,
+};
+__ATTRIBUTE_GROUPS(pd);
+
+static void pd_release(struct device *dev)
+{
+	struct usb_power_delivery *pd = to_usb_power_delivery(dev);
+
+	ida_simple_remove(&pd_ida, pd->id);
+	kfree(pd);
+}
+
+static struct device_type pd_type = {
+	.name = "usb_power_delivery",
+	.release = pd_release,
+	.groups = pd_groups,
+};
+
+struct usb_power_delivery *usb_power_delivery_find(const char *name)
+{
+	struct device *dev;
+
+	dev = class_find_device_by_name(&pd_class, name);
+
+	return dev ? to_usb_power_delivery(dev) : NULL;
+}
+
+/**
+ * usb_power_delivery_register - Register USB Power Delivery Support.
+ * @parent: Parent device.
+ * @desc: Description of the USB PD contract.
+ *
+ * This routine can be used to register USB Power Delivery capabilities that a
+ * device or devices can support. These capabilities represent all the
+ * capabilities that can be negotiated with a partner, so not only the Power
+ * Capabilities that are negotiated using the USB PD Capabilities Message.
+ *
+ * The USB Power Delivery Support object that this routine generates can be used
+ * as the parent object for all the actual USB Power Delivery Messages and
+ * objects that can be negotiated with the partner.
+ *
+ * Returns handle to struct usb_power_delivery or ERR_PTR.
+ */
+struct usb_power_delivery *
+usb_power_delivery_register(struct device *parent, struct usb_power_delivery_desc *desc)
+{
+	struct usb_power_delivery *pd;
+	int ret;
+
+	pd = kzalloc(sizeof(*pd), GFP_KERNEL);
+	if (!pd)
+		return ERR_PTR(-ENOMEM);
+
+	ret = ida_simple_get(&pd_ida, 0, 0, GFP_KERNEL);
+	if (ret < 0) {
+		kfree(pd);
+		return ERR_PTR(ret);
+	}
+
+	pd->id = ret;
+	pd->revision = desc->revision;
+	pd->version = desc->version;
+
+	pd->dev.parent = parent;
+	pd->dev.type = &pd_type;
+	pd->dev.class = &pd_class;
+	dev_set_name(&pd->dev, "pd%d", pd->id);
+
+	ret = device_register(&pd->dev);
+	if (ret) {
+		put_device(&pd->dev);
+		return ERR_PTR(ret);
+	}
+
+	return pd;
+}
+EXPORT_SYMBOL_GPL(usb_power_delivery_register);
+
+/**
+ * usb_power_delivery_unregister - Unregister USB Power Delivery Support.
+ * @pd: The USB PD contract.
+ */
+void usb_power_delivery_unregister(struct usb_power_delivery *pd)
+{
+	if (IS_ERR_OR_NULL(pd))
+		return;
+
+	device_unregister(&pd->dev);
+}
+EXPORT_SYMBOL_GPL(usb_power_delivery_unregister);
+
+/**
+ * usb_power_delivery_link_device - Link device to its USB PD object.
+ * @pd: The USB PD instance.
+ * @dev: The device.
+ *
+ * This function can be used to create a symlink named "usb_power_delivery" for
+ * @dev that points to @pd.
+ */
+int usb_power_delivery_link_device(struct usb_power_delivery *pd, struct device *dev)
+{
+	int ret;
+
+	if (IS_ERR_OR_NULL(pd) || !dev)
+		return 0;
+
+	ret = sysfs_create_link(&dev->kobj, &pd->dev.kobj, "usb_power_delivery");
+	if (ret)
+		return ret;
+
+	get_device(&pd->dev);
+	get_device(dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_power_delivery_link_device);
+
+/**
+ * usb_power_delivery_unlink_device - Unlink device from its USB PD object.
+ * @pd: The USB PD instance.
+ * @dev: The device.
+ *
+ * Remove the symlink that was previously created with pd_link_device().
+ */
+void usb_power_delivery_unlink_device(struct usb_power_delivery *pd, struct device *dev)
+{
+	if (IS_ERR_OR_NULL(pd) || !dev)
+		return;
+
+	sysfs_remove_link(&dev->kobj, "usb_power_delivery");
+	put_device(&pd->dev);
+	put_device(dev);
+}
+EXPORT_SYMBOL_GPL(usb_power_delivery_unlink_device);
+
+/* -------------------------------------------------------------------------- */
+
+int __init usb_power_delivery_init(void)
+{
+	return class_register(&pd_class);
+}
+
+void __exit usb_power_delivery_exit(void)
+{
+	ida_destroy(&pd_ida);
+	class_unregister(&pd_class);
+}
diff --git a/drivers/usb/typec/pd.h b/drivers/usb/typec/pd.h
new file mode 100644
index 000000000..049a1aad4
--- /dev/null
+++ b/drivers/usb/typec/pd.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __USB_POWER_DELIVERY__
+#define __USB_POWER_DELIVERY__
+
+#include <linux/device.h>
+#include <linux/usb/typec.h>
+
+struct usb_power_delivery {
+	struct device dev;
+	int id;
+	u16 revision;
+	u16 version;
+};
+
+struct usb_power_delivery_capabilities {
+	struct device dev;
+	struct usb_power_delivery *pd;
+	enum typec_role role;
+};
+
+#define to_usb_power_delivery_capabilities(o) container_of(o, struct usb_power_delivery_capabilities, dev)
+#define to_usb_power_delivery(o) container_of(o, struct usb_power_delivery, dev)
+
+struct usb_power_delivery *usb_power_delivery_find(const char *name);
+
+int usb_power_delivery_init(void);
+void usb_power_delivery_exit(void);
+
+#endif /* __USB_POWER_DELIVERY__ */
diff --git a/drivers/usb/typec/port-mapper.c b/drivers/usb/typec/port-mapper.c
new file mode 100644
index 000000000..a929e000d
--- /dev/null
+++ b/drivers/usb/typec/port-mapper.c
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Type-C Connector Class Port Mapping Utility
+ *
+ * Copyright (C) 2021, Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/component.h>
+
+#include "class.h"
+
+static int typec_aggregate_bind(struct device *dev)
+{
+	return component_bind_all(dev, NULL);
+}
+
+static void typec_aggregate_unbind(struct device *dev)
+{
+	component_unbind_all(dev, NULL);
+}
+
+static const struct component_master_ops typec_aggregate_ops = {
+	.bind = typec_aggregate_bind,
+	.unbind = typec_aggregate_unbind,
+};
+
+struct each_port_arg {
+	struct typec_port *port;
+	struct component_match *match;
+};
+
+static int typec_port_compare(struct device *dev, void *fwnode)
+{
+	return device_match_fwnode(dev, fwnode);
+}
+
+static int typec_port_match(struct device *dev, void *data)
+{
+	struct acpi_device *adev = to_acpi_device(dev);
+	struct each_port_arg *arg = data;
+	struct acpi_device *con_adev;
+
+	con_adev = ACPI_COMPANION(&arg->port->dev);
+	if (con_adev == adev)
+		return 0;
+
+	if (con_adev->pld_crc == adev->pld_crc)
+		component_match_add(&arg->port->dev, &arg->match, typec_port_compare,
+				    acpi_fwnode_handle(adev));
+	return 0;
+}
+
+int typec_link_ports(struct typec_port *con)
+{
+	struct each_port_arg arg = { .port = con, .match = NULL };
+
+	if (!has_acpi_companion(&con->dev))
+		return 0;
+
+	acpi_bus_for_each_dev(typec_port_match, &arg);
+	if (!arg.match)
+		return 0;
+
+	/*
+	 * REVISIT: Now each connector can have only a single component master.
+	 * So far only the USB ports connected to the USB Type-C connector share
+	 * the _PLD with it, but if there one day is something else (like maybe
+	 * the DisplayPort ACPI device object) that also shares the _PLD with
+	 * the connector, every one of those needs to have its own component
+	 * master, because each different type of component needs to be bind to
+	 * the connector independently of the other components. That requires
+	 * improvements to the component framework. Right now you can only have
+	 * one master per device.
+	 */
+	return component_master_add_with_match(&con->dev, &typec_aggregate_ops, arg.match);
+}
+
+void typec_unlink_ports(struct typec_port *con)
+{
+	if (has_acpi_companion(&con->dev))
+		component_master_del(&con->dev, &typec_aggregate_ops);
+}
diff --git a/drivers/usb/typec/qcom-pmic-typec.c b/drivers/usb/typec/qcom-pmic-typec.c
new file mode 100644
index 000000000..432ea62f1
--- /dev/null
+++ b/drivers/usb/typec/qcom-pmic-typec.c
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/usb/role.h>
+#include <linux/usb/typec_mux.h>
+
+#define TYPEC_MISC_STATUS		0xb
+#define CC_ATTACHED			BIT(0)
+#define CC_ORIENTATION			BIT(1)
+#define SNK_SRC_MODE			BIT(6)
+#define TYPEC_MODE_CFG			0x44
+#define TYPEC_DISABLE_CMD		BIT(0)
+#define EN_SNK_ONLY			BIT(1)
+#define EN_SRC_ONLY			BIT(2)
+#define TYPEC_VCONN_CONTROL		0x46
+#define VCONN_EN_SRC			BIT(0)
+#define VCONN_EN_VAL			BIT(1)
+#define TYPEC_EXIT_STATE_CFG		0x50
+#define SEL_SRC_UPPER_REF		BIT(2)
+#define TYPEC_INTR_EN_CFG_1		0x5e
+#define TYPEC_INTR_EN_CFG_1_MASK	GENMASK(7, 0)
+
+struct qcom_pmic_typec {
+	struct device		*dev;
+	struct regmap		*regmap;
+	u32			base;
+
+	struct typec_port	*port;
+	struct usb_role_switch *role_sw;
+
+	struct regulator	*vbus_reg;
+	bool			vbus_enabled;
+};
+
+static void qcom_pmic_typec_enable_vbus_regulator(struct qcom_pmic_typec
+							*qcom_usb, bool enable)
+{
+	int ret;
+
+	if (enable == qcom_usb->vbus_enabled)
+		return;
+
+	if (enable) {
+		ret = regulator_enable(qcom_usb->vbus_reg);
+		if (ret)
+			return;
+	} else {
+		ret = regulator_disable(qcom_usb->vbus_reg);
+		if (ret)
+			return;
+	}
+	qcom_usb->vbus_enabled = enable;
+}
+
+static void qcom_pmic_typec_check_connection(struct qcom_pmic_typec *qcom_usb)
+{
+	enum typec_orientation orientation;
+	enum usb_role role;
+	unsigned int stat;
+	bool enable_vbus;
+
+	regmap_read(qcom_usb->regmap, qcom_usb->base + TYPEC_MISC_STATUS,
+		    &stat);
+
+	if (stat & CC_ATTACHED) {
+		orientation = (stat & CC_ORIENTATION) ?
+				TYPEC_ORIENTATION_REVERSE :
+				TYPEC_ORIENTATION_NORMAL;
+		typec_set_orientation(qcom_usb->port, orientation);
+
+		role = (stat & SNK_SRC_MODE) ? USB_ROLE_HOST : USB_ROLE_DEVICE;
+		if (role == USB_ROLE_HOST)
+			enable_vbus = true;
+		else
+			enable_vbus = false;
+	} else {
+		role = USB_ROLE_NONE;
+		enable_vbus = false;
+	}
+
+	qcom_pmic_typec_enable_vbus_regulator(qcom_usb, enable_vbus);
+	usb_role_switch_set_role(qcom_usb->role_sw, role);
+}
+
+static irqreturn_t qcom_pmic_typec_interrupt(int irq, void *_qcom_usb)
+{
+	struct qcom_pmic_typec *qcom_usb = _qcom_usb;
+
+	qcom_pmic_typec_check_connection(qcom_usb);
+	return IRQ_HANDLED;
+}
+
+static void qcom_pmic_typec_typec_hw_init(struct qcom_pmic_typec *qcom_usb,
+					  enum typec_port_type type)
+{
+	u8 mode = 0;
+
+	regmap_update_bits(qcom_usb->regmap,
+			   qcom_usb->base + TYPEC_INTR_EN_CFG_1,
+			   TYPEC_INTR_EN_CFG_1_MASK, 0);
+
+	if (type == TYPEC_PORT_SRC)
+		mode = EN_SRC_ONLY;
+	else if (type == TYPEC_PORT_SNK)
+		mode = EN_SNK_ONLY;
+
+	regmap_update_bits(qcom_usb->regmap, qcom_usb->base + TYPEC_MODE_CFG,
+			   EN_SNK_ONLY | EN_SRC_ONLY, mode);
+
+	regmap_update_bits(qcom_usb->regmap,
+			   qcom_usb->base + TYPEC_VCONN_CONTROL,
+			   VCONN_EN_SRC | VCONN_EN_VAL, VCONN_EN_SRC);
+	regmap_update_bits(qcom_usb->regmap,
+			   qcom_usb->base + TYPEC_EXIT_STATE_CFG,
+			   SEL_SRC_UPPER_REF, SEL_SRC_UPPER_REF);
+}
+
+static int qcom_pmic_typec_probe(struct platform_device *pdev)
+{
+	struct qcom_pmic_typec *qcom_usb;
+	struct device *dev = &pdev->dev;
+	struct fwnode_handle *fwnode;
+	struct typec_capability cap;
+	const char *buf;
+	int ret, irq, role;
+	u32 reg;
+
+	ret = device_property_read_u32(dev, "reg", &reg);
+	if (ret < 0) {
+		dev_err(dev, "missing base address\n");
+		return ret;
+	}
+
+	qcom_usb = devm_kzalloc(dev, sizeof(*qcom_usb), GFP_KERNEL);
+	if (!qcom_usb)
+		return -ENOMEM;
+
+	qcom_usb->dev = dev;
+	qcom_usb->base = reg;
+
+	qcom_usb->regmap = dev_get_regmap(dev->parent, NULL);
+	if (!qcom_usb->regmap) {
+		dev_err(dev, "Failed to get regmap\n");
+		return -EINVAL;
+	}
+
+	qcom_usb->vbus_reg = devm_regulator_get(qcom_usb->dev, "usb_vbus");
+	if (IS_ERR(qcom_usb->vbus_reg))
+		return PTR_ERR(qcom_usb->vbus_reg);
+
+	fwnode = device_get_named_child_node(dev, "connector");
+	if (!fwnode)
+		return -EINVAL;
+
+	ret = fwnode_property_read_string(fwnode, "power-role", &buf);
+	if (!ret) {
+		role = typec_find_port_power_role(buf);
+		if (role < 0)
+			role = TYPEC_PORT_SNK;
+	} else {
+		role = TYPEC_PORT_SNK;
+	}
+	cap.type = role;
+
+	ret = fwnode_property_read_string(fwnode, "data-role", &buf);
+	if (!ret) {
+		role = typec_find_port_data_role(buf);
+		if (role < 0)
+			role = TYPEC_PORT_UFP;
+	} else {
+		role = TYPEC_PORT_UFP;
+	}
+	cap.data = role;
+
+	cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
+	cap.fwnode = fwnode;
+	qcom_usb->port = typec_register_port(dev, &cap);
+	if (IS_ERR(qcom_usb->port)) {
+		ret = PTR_ERR(qcom_usb->port);
+		dev_err(dev, "Failed to register type c port %d\n", ret);
+		goto err_put_node;
+	}
+	fwnode_handle_put(fwnode);
+
+	qcom_usb->role_sw = fwnode_usb_role_switch_get(dev_fwnode(qcom_usb->dev));
+	if (IS_ERR(qcom_usb->role_sw)) {
+		ret = dev_err_probe(dev, PTR_ERR(qcom_usb->role_sw),
+				    "failed to get role switch\n");
+		goto err_typec_port;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		goto err_usb_role_sw;
+
+	ret = devm_request_threaded_irq(qcom_usb->dev, irq, NULL,
+					qcom_pmic_typec_interrupt, IRQF_ONESHOT,
+					"qcom-pmic-typec", qcom_usb);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not request IRQ\n");
+		goto err_usb_role_sw;
+	}
+
+	platform_set_drvdata(pdev, qcom_usb);
+	qcom_pmic_typec_typec_hw_init(qcom_usb, cap.type);
+	qcom_pmic_typec_check_connection(qcom_usb);
+
+	return 0;
+
+err_usb_role_sw:
+	usb_role_switch_put(qcom_usb->role_sw);
+err_typec_port:
+	typec_unregister_port(qcom_usb->port);
+err_put_node:
+	fwnode_handle_put(fwnode);
+
+	return ret;
+}
+
+static int qcom_pmic_typec_remove(struct platform_device *pdev)
+{
+	struct qcom_pmic_typec *qcom_usb = platform_get_drvdata(pdev);
+
+	usb_role_switch_set_role(qcom_usb->role_sw, USB_ROLE_NONE);
+	qcom_pmic_typec_enable_vbus_regulator(qcom_usb, 0);
+
+	typec_unregister_port(qcom_usb->port);
+	usb_role_switch_put(qcom_usb->role_sw);
+
+	return 0;
+}
+
+static const struct of_device_id qcom_pmic_typec_table[] = {
+	{ .compatible = "qcom,pm8150b-usb-typec" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table);
+
+static struct platform_driver qcom_pmic_typec = {
+	.driver = {
+		.name = "qcom,pmic-typec",
+		.of_match_table = qcom_pmic_typec_table,
+	},
+	.probe = qcom_pmic_typec_probe,
+	.remove = qcom_pmic_typec_remove,
+};
+module_platform_driver(qcom_pmic_typec);
+
+MODULE_DESCRIPTION("QCOM PMIC USB type C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/typec/retimer.c b/drivers/usb/typec/retimer.c
new file mode 100644
index 000000000..ee94dbbe4
--- /dev/null
+++ b/drivers/usb/typec/retimer.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 Google LLC
+ *
+ * USB Type-C Retimer support.
+ * Author: Prashant Malani <pmalani@chromium.org>
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+
+#include "class.h"
+#include "retimer.h"
+
+static bool dev_name_ends_with(struct device *dev, const char *suffix)
+{
+	const char *name = dev_name(dev);
+	const int name_len = strlen(name);
+	const int suffix_len = strlen(suffix);
+
+	if (suffix_len > name_len)
+		return false;
+
+	return strcmp(name + (name_len - suffix_len), suffix) == 0;
+}
+
+static int retimer_fwnode_match(struct device *dev, const void *fwnode)
+{
+	return device_match_fwnode(dev, fwnode) && dev_name_ends_with(dev, "-retimer");
+}
+
+static void *typec_retimer_match(struct fwnode_handle *fwnode, const char *id, void *data)
+{
+	struct device *dev;
+
+	if (id && !fwnode_property_present(fwnode, id))
+		return NULL;
+
+	dev = class_find_device(&retimer_class, NULL, fwnode,
+				retimer_fwnode_match);
+
+	return dev ? to_typec_retimer(dev) : ERR_PTR(-EPROBE_DEFER);
+}
+
+/**
+ * fwnode_typec_retimer_get - Find USB Type-C retimer.
+ * @fwnode: The caller device node.
+ *
+ * Finds a retimer linked to the caller. This function is primarily meant for the
+ * Type-C drivers. Returns a reference to the retimer on success, NULL if no
+ * matching connection was found, or ERR_PTR(-EPROBE_DEFER) when a connection
+ * was found but the retimer has not been enumerated yet.
+ */
+struct typec_retimer *fwnode_typec_retimer_get(struct fwnode_handle *fwnode)
+{
+	struct typec_retimer *retimer;
+
+	retimer = fwnode_connection_find_match(fwnode, "retimer-switch", NULL, typec_retimer_match);
+	if (!IS_ERR_OR_NULL(retimer))
+		WARN_ON(!try_module_get(retimer->dev.parent->driver->owner));
+
+	return retimer;
+}
+EXPORT_SYMBOL_GPL(fwnode_typec_retimer_get);
+
+/**
+ * typec_retimer_put - Release handle to a retimer.
+ * @retimer: USB Type-C Connector Retimer.
+ *
+ * Decrements reference count for @retimer.
+ */
+void typec_retimer_put(struct typec_retimer *retimer)
+{
+	if (!IS_ERR_OR_NULL(retimer)) {
+		module_put(retimer->dev.parent->driver->owner);
+		put_device(&retimer->dev);
+	}
+}
+EXPORT_SYMBOL_GPL(typec_retimer_put);
+
+int typec_retimer_set(struct typec_retimer *retimer, struct typec_retimer_state *state)
+{
+	if (IS_ERR_OR_NULL(retimer))
+		return 0;
+
+	return retimer->set(retimer, state);
+}
+EXPORT_SYMBOL_GPL(typec_retimer_set);
+
+static void typec_retimer_release(struct device *dev)
+{
+	kfree(to_typec_retimer(dev));
+}
+
+static const struct device_type typec_retimer_dev_type = {
+	.name = "typec_retimer",
+	.release = typec_retimer_release,
+};
+
+/**
+ * typec_retimer_register - Register a retimer device.
+ * @parent: Parent device.
+ * @desc: Retimer description.
+ *
+ * Some USB Type-C connectors have their physical lines routed through retimers before they
+ * reach muxes or host controllers. In some cases (for example: using alternate modes)
+ * these retimers need to be reconfigured appropriately. This function registers retimer
+ * switches which route and potentially modify the signals on the Type C physical lines
+ * enroute to the host controllers.
+ */
+struct typec_retimer *
+typec_retimer_register(struct device *parent, const struct typec_retimer_desc *desc)
+{
+	struct typec_retimer *retimer;
+	int ret;
+
+	if (!desc || !desc->set)
+		return ERR_PTR(-EINVAL);
+
+	retimer = kzalloc(sizeof(*retimer), GFP_KERNEL);
+	if (!retimer)
+		return ERR_PTR(-ENOMEM);
+
+	retimer->set = desc->set;
+
+	device_initialize(&retimer->dev);
+	retimer->dev.parent = parent;
+	retimer->dev.fwnode = desc->fwnode;
+	retimer->dev.class = &retimer_class;
+	retimer->dev.type = &typec_retimer_dev_type;
+	retimer->dev.driver_data = desc->drvdata;
+	dev_set_name(&retimer->dev, "%s-retimer",
+		     desc->name ? desc->name : dev_name(parent));
+
+	ret = device_add(&retimer->dev);
+	if (ret) {
+		dev_err(parent, "failed to register retimer (%d)\n", ret);
+		put_device(&retimer->dev);
+		return ERR_PTR(ret);
+	}
+
+	return retimer;
+}
+EXPORT_SYMBOL_GPL(typec_retimer_register);
+
+/**
+ * typec_retimer_unregister - Unregister retimer device.
+ * @retimer: USB Type-C Connector retimer.
+ *
+ * Unregister retimer that was registered with typec_retimer_register().
+ */
+void typec_retimer_unregister(struct typec_retimer *retimer)
+{
+	if (!IS_ERR_OR_NULL(retimer))
+		device_unregister(&retimer->dev);
+}
+EXPORT_SYMBOL_GPL(typec_retimer_unregister);
+
+void *typec_retimer_get_drvdata(struct typec_retimer *retimer)
+{
+	return dev_get_drvdata(&retimer->dev);
+}
+EXPORT_SYMBOL_GPL(typec_retimer_get_drvdata);
+
+struct class retimer_class = {
+	.name = "retimer",
+	.owner = THIS_MODULE,
+};
diff --git a/drivers/usb/typec/retimer.h b/drivers/usb/typec/retimer.h
new file mode 100644
index 000000000..fa15951d4
--- /dev/null
+++ b/drivers/usb/typec/retimer.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __USB_TYPEC_RETIMER__
+#define __USB_TYPEC_RETIMER__
+
+#include <linux/usb/typec_retimer.h>
+
+struct typec_retimer {
+	struct device dev;
+	typec_retimer_set_fn_t set;
+};
+
+#define to_typec_retimer(_dev_) container_of(_dev_, struct typec_retimer, dev)
+
+#endif /* __USB_TYPEC_RETIMER__ */
diff --git a/drivers/usb/typec/rt1719.c b/drivers/usb/typec/rt1719.c
new file mode 100644
index 000000000..ea8b700b0
--- /dev/null
+++ b/drivers/usb/typec/rt1719.c
@@ -0,0 +1,959 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/bitfield.h>
+#include <linux/completion.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/usb/pd.h>
+#include <linux/usb/role.h>
+#include <linux/usb/typec.h>
+
+#define RT1719_REG_TXCTRL1	0x03
+#define RT1719_REG_TXCTRL2	0x04
+#define RT1719_REG_POLICYINFO	0x0E
+#define RT1719_REG_SRCPDO1	0x11
+#define RT1719_REG_MASKS	0x2D
+#define RT1719_REG_EVENTS	0x33
+#define RT1719_REG_STATS	0x37
+#define RT1719_REG_PSELINFO	0x3C
+#define RT1719_REG_USBSETINFO	0x3E
+#define RT1719_REG_VENID	0x82
+
+#define RT1719_UNIQUE_PID	0x1719
+#define RT1719_REQDRSWAP_MASK	BIT(7)
+#define RT1719_EVALMODE_MASK	BIT(4)
+#define RT1719_REQSRCPDO_MASK	GENMASK(2, 0)
+#define RT1719_TXSPDOREQ_MASK	BIT(7)
+#define RT1719_INT_DRSW_ACCEPT	BIT(23)
+#define RT1719_INT_RX_SRCCAP	BIT(21)
+#define RT1719_INT_VBUS_DCT	BIT(6)
+#define RT1719_INT_VBUS_PRESENT	BIT(5)
+#define RT1719_INT_PE_SNK_RDY	BIT(2)
+#define RT1719_CC1_STAT		GENMASK(9, 8)
+#define RT1719_CC2_STAT		GENMASK(11, 10)
+#define RT1719_POLARITY_MASK	BIT(23)
+#define RT1719_DATAROLE_MASK	BIT(22)
+#define RT1719_PDSPECREV_MASK	GENMASK(21, 20)
+#define RT1719_SPDOSEL_MASK	GENMASK(18, 16)
+#define RT1719_SPDONUM_MASK	GENMASK(15, 13)
+#define RT1719_ATTACH_VBUS	BIT(12)
+#define RT1719_ATTACH_DBG	BIT(10)
+#define RT1719_ATTACH_SNK	BIT(9)
+#define RT1719_ATTACHDEV_MASK	(RT1719_ATTACH_VBUS | RT1719_ATTACH_DBG | \
+				 RT1719_ATTACH_SNK)
+#define RT1719_PE_EXP_CONTRACT	BIT(2)
+#define RT1719_PSEL_SUPPORT	BIT(15)
+#define RT1719_TBLSEL_MASK	BIT(6)
+#define RT1719_LATPSEL_MASK	GENMASK(5, 0)
+#define RT1719_USBINFO_MASK	GENMASK(1, 0)
+#define RT1719_USB_DFPUFP	3
+#define RT1719_MAX_SRCPDO	7
+
+enum {
+	SNK_PWR_OPEN = 0,
+	SNK_PWR_DEF,
+	SNK_PWR_1P5A,
+	SNK_PWR_3A
+};
+
+enum {
+	USBPD_SPECREV_1_0 = 0,
+	USBPD_SPECREV_2_0,
+	USBPD_SPECREV_3_0
+};
+
+enum rt1719_snkcap {
+	RT1719_SNKCAP_5V = 0,
+	RT1719_SNKCAP_9V,
+	RT1719_SNKCAP_12V,
+	RT1719_SNKCAP_15V,
+	RT1719_SNKCAP_20V,
+	RT1719_MAX_SNKCAP
+};
+
+struct rt1719_psel_cap {
+	u8 lomask;
+	u8 himask;
+	u32 milliwatt;
+	u32 milliamp;
+};
+
+struct rt1719_data {
+	struct device *dev;
+	struct regmap *regmap;
+	struct typec_port *port;
+	struct usb_role_switch *role_sw;
+	struct power_supply *psy;
+	struct typec_partner *partner;
+	struct power_supply_desc psy_desc;
+	struct usb_pd_identity partner_ident;
+	struct typec_partner_desc partner_desc;
+	struct completion req_completion;
+	enum power_supply_usb_type usb_type;
+	bool attached;
+	bool pd_capable;
+	bool drswap_support;
+	u32 voltage;
+	u32 req_voltage;
+	u32 max_current;
+	u32 op_current;
+	u32 spdos[RT1719_MAX_SRCPDO];
+	u16 snkcaps[RT1719_MAX_SNKCAP];
+	int spdo_num;
+	int spdo_sel;
+	u32 conn_info;
+	u16 conn_stat;
+};
+
+static const enum power_supply_usb_type rt1719_psy_usb_types[] = {
+	POWER_SUPPLY_USB_TYPE_C,
+	POWER_SUPPLY_USB_TYPE_PD,
+	POWER_SUPPLY_USB_TYPE_PD_PPS
+};
+
+static const enum power_supply_property rt1719_psy_properties[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_USB_TYPE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CURRENT_NOW
+};
+
+static int rt1719_read16(struct rt1719_data *data, unsigned int reg, u16 *val)
+{
+	__le16 regval;
+	int ret;
+
+	ret = regmap_raw_read(data->regmap, reg, &regval, sizeof(regval));
+	if (ret)
+		return ret;
+
+	*val = le16_to_cpu(regval);
+	return 0;
+}
+
+static int rt1719_read32(struct rt1719_data *data, unsigned int reg, u32 *val)
+{
+	__le32 regval;
+	int ret;
+
+	ret = regmap_raw_read(data->regmap, reg, &regval, sizeof(regval));
+	if (ret)
+		return ret;
+
+	*val = le32_to_cpu(regval);
+	return 0;
+}
+
+static int rt1719_write32(struct rt1719_data *data, unsigned int reg, u32 val)
+{
+	__le32 regval = cpu_to_le32(val);
+
+	return regmap_raw_write(data->regmap, reg, &regval, sizeof(regval));
+}
+
+static enum typec_pwr_opmode rt1719_get_pwr_opmode(u32 conn, u16 stat)
+{
+	u16 cc1, cc2, cc_stat;
+
+	cc1 = FIELD_GET(RT1719_CC1_STAT, stat);
+	cc2 = FIELD_GET(RT1719_CC2_STAT, stat);
+
+	if (conn & RT1719_ATTACH_SNK) {
+		if (conn & RT1719_POLARITY_MASK)
+			cc_stat = cc2;
+		else
+			cc_stat = cc1;
+
+		switch (cc_stat) {
+		case SNK_PWR_3A:
+			return TYPEC_PWR_MODE_3_0A;
+		case SNK_PWR_1P5A:
+			return TYPEC_PWR_MODE_1_5A;
+		}
+	} else if (conn & RT1719_ATTACH_DBG) {
+		if ((cc1 == SNK_PWR_1P5A && cc2 == SNK_PWR_DEF) ||
+		    (cc1 == SNK_PWR_DEF && cc2 == SNK_PWR_1P5A))
+			return TYPEC_PWR_MODE_1_5A;
+		else if ((cc1 == SNK_PWR_3A && cc2 == SNK_PWR_DEF) ||
+			 (cc1 == SNK_PWR_DEF && cc2 == SNK_PWR_3A))
+			return TYPEC_PWR_MODE_3_0A;
+	}
+
+	return TYPEC_PWR_MODE_USB;
+}
+
+static enum typec_data_role rt1719_get_data_role(u32 conn)
+{
+	if (conn & RT1719_DATAROLE_MASK)
+		return TYPEC_HOST;
+	return TYPEC_DEVICE;
+}
+
+static void rt1719_set_data_role(struct rt1719_data *data,
+				 enum typec_data_role data_role,
+				 bool attached)
+{
+	enum usb_role usb_role = USB_ROLE_NONE;
+
+	if (attached) {
+		if (data_role == TYPEC_HOST)
+			usb_role = USB_ROLE_HOST;
+		else
+			usb_role = USB_ROLE_DEVICE;
+	}
+
+	usb_role_switch_set_role(data->role_sw, usb_role);
+	typec_set_data_role(data->port, data_role);
+}
+
+static void rt1719_update_data_role(struct rt1719_data *data)
+{
+	if (!data->attached)
+		return;
+
+	rt1719_set_data_role(data, rt1719_get_data_role(data->conn_info), true);
+}
+
+static void rt1719_register_partner(struct rt1719_data *data)
+{
+	u16 spec_rev = 0;
+
+	if (data->pd_capable) {
+		u32 rev;
+
+		rev = FIELD_GET(RT1719_PDSPECREV_MASK, data->conn_info);
+		switch (rev) {
+		case USBPD_SPECREV_3_0:
+			spec_rev = 0x0300;
+			break;
+		case USBPD_SPECREV_2_0:
+			spec_rev = 0x0200;
+			break;
+		default:
+			spec_rev = 0x0100;
+			break;
+		}
+	}
+
+	/* Just to prevent multiple times attach */
+	if (data->partner)
+		typec_unregister_partner(data->partner);
+
+	memset(&data->partner_ident, 0, sizeof(data->partner_ident));
+	data->partner_desc.usb_pd = data->pd_capable;
+	data->partner_desc.pd_revision = spec_rev;
+
+	if (data->conn_info & RT1719_ATTACH_DBG)
+		data->partner_desc.accessory = TYPEC_ACCESSORY_DEBUG;
+	else
+		data->partner_desc.accessory = TYPEC_ACCESSORY_NONE;
+
+	data->partner = typec_register_partner(data->port, &data->partner_desc);
+}
+
+static void rt1719_attach(struct rt1719_data *data)
+{
+	enum typec_pwr_opmode pwr_opmode;
+	enum typec_data_role data_role;
+	u32 volt = 5000, curr = 500;
+
+	if (!(data->conn_info & RT1719_ATTACHDEV_MASK))
+		return;
+
+	pwr_opmode = rt1719_get_pwr_opmode(data->conn_info, data->conn_stat);
+	data_role = rt1719_get_data_role(data->conn_info);
+
+	typec_set_pwr_opmode(data->port, pwr_opmode);
+	rt1719_set_data_role(data, data_role, true);
+
+	if (data->conn_info & RT1719_ATTACH_SNK)
+		rt1719_register_partner(data);
+
+	if (pwr_opmode == TYPEC_PWR_MODE_3_0A)
+		curr = 3000;
+	else if (pwr_opmode == TYPEC_PWR_MODE_1_5A)
+		curr = 1500;
+
+	data->voltage = volt * 1000;
+	data->max_current = data->op_current = curr * 1000;
+	data->attached = true;
+
+	power_supply_changed(data->psy);
+}
+
+static void rt1719_detach(struct rt1719_data *data)
+{
+	if (!data->attached || (data->conn_info & RT1719_ATTACHDEV_MASK))
+		return;
+
+	typec_unregister_partner(data->partner);
+	data->partner = NULL;
+
+	typec_set_pwr_opmode(data->port, TYPEC_PWR_MODE_USB);
+	rt1719_set_data_role(data, TYPEC_DEVICE, false);
+
+	memset32(data->spdos, 0, RT1719_MAX_SRCPDO);
+	data->spdo_num = 0;
+	data->voltage = data->max_current = data->op_current = 0;
+	data->attached = data->pd_capable = false;
+
+	data->usb_type = POWER_SUPPLY_USB_TYPE_C;
+
+	power_supply_changed(data->psy);
+}
+
+static void rt1719_update_operating_status(struct rt1719_data *data)
+{
+	enum power_supply_usb_type usb_type = POWER_SUPPLY_USB_TYPE_PD;
+	u32 voltage, max_current, op_current;
+	int i, snk_sel;
+
+	for (i = 0; i < data->spdo_num; i++) {
+		u32 pdo = data->spdos[i];
+		enum pd_pdo_type type = pdo_type(pdo);
+
+		if (type == PDO_TYPE_APDO) {
+			usb_type = POWER_SUPPLY_USB_TYPE_PD_PPS;
+			break;
+		}
+	}
+
+	data->spdo_sel = FIELD_GET(RT1719_SPDOSEL_MASK, data->conn_info);
+	if (data->spdo_sel <= 0)
+		return;
+
+	data->usb_type = usb_type;
+
+	voltage = pdo_fixed_voltage(data->spdos[data->spdo_sel - 1]);
+	max_current = pdo_max_current(data->spdos[data->spdo_sel - 1]);
+
+	switch (voltage) {
+	case 5000:
+		snk_sel = RT1719_SNKCAP_5V;
+		break;
+	case 9000:
+		snk_sel = RT1719_SNKCAP_9V;
+		break;
+	case 12000:
+		snk_sel = RT1719_SNKCAP_12V;
+		break;
+	case 15000:
+		snk_sel = RT1719_SNKCAP_15V;
+		break;
+	case 20000:
+		snk_sel = RT1719_SNKCAP_20V;
+		break;
+	default:
+		return;
+	}
+
+	op_current = min(max_current, pdo_max_current(data->snkcaps[snk_sel]));
+
+	/* covert mV/mA to uV/uA */
+	data->voltage = voltage * 1000;
+	data->max_current = max_current * 1000;
+	data->op_current = op_current * 1000;
+
+	power_supply_changed(data->psy);
+}
+
+static void rt1719_update_pwr_opmode(struct rt1719_data *data)
+{
+	if (!data->attached)
+		return;
+
+	if (!data->pd_capable) {
+		data->pd_capable = true;
+
+		typec_set_pwr_opmode(data->port, TYPEC_PWR_MODE_PD);
+		rt1719_register_partner(data);
+	}
+
+	rt1719_update_operating_status(data);
+}
+
+static void rt1719_update_source_pdos(struct rt1719_data *data)
+{
+	int spdo_num = FIELD_GET(RT1719_SPDONUM_MASK, data->conn_info);
+	__le32 src_pdos[RT1719_MAX_SRCPDO] = { };
+	int i, ret;
+
+	if (!data->attached)
+		return;
+
+	ret = regmap_raw_read(data->regmap, RT1719_REG_SRCPDO1, src_pdos,
+			      sizeof(__le32) * spdo_num);
+	if (ret)
+		return;
+
+	data->spdo_num = spdo_num;
+	for (i = 0; i < spdo_num; i++)
+		data->spdos[i] = le32_to_cpu(src_pdos[i]);
+}
+
+static int rt1719_dr_set(struct typec_port *port, enum typec_data_role role)
+{
+	struct rt1719_data *data = typec_get_drvdata(port);
+	enum typec_data_role cur_role;
+	int ret;
+
+	if (!data->attached || !data->pd_capable || !data->drswap_support)
+		return -EOPNOTSUPP;
+
+	if (data->spdo_num > 0 && !(data->spdos[0] & PDO_FIXED_DATA_SWAP))
+		return -EINVAL;
+
+	cur_role = rt1719_get_data_role(data->conn_info);
+	if (cur_role == role)
+		return 0;
+
+	ret = regmap_update_bits(data->regmap, RT1719_REG_TXCTRL1,
+				 RT1719_REQDRSWAP_MASK, RT1719_REQDRSWAP_MASK);
+	if (ret)
+		return ret;
+
+	reinit_completion(&data->req_completion);
+	ret = wait_for_completion_timeout(&data->req_completion,
+					  msecs_to_jiffies(400));
+	if (ret == 0)
+		return -ETIMEDOUT;
+
+	cur_role = rt1719_get_data_role(data->conn_info);
+	if (cur_role != role)
+		return -EAGAIN;
+
+	rt1719_set_data_role(data, role, true);
+	return 0;
+}
+
+static const struct typec_operations rt1719_port_ops = {
+	.dr_set = rt1719_dr_set,
+};
+
+static int rt1719_usbpd_request_voltage(struct rt1719_data *data)
+{
+	u32 src_voltage;
+	int snk_sel, src_sel = -1;
+	int i, ret;
+
+	if (!data->attached || !data->pd_capable || data->spdo_sel <= 0)
+		return -EINVAL;
+
+	src_voltage = pdo_fixed_voltage(data->spdos[data->spdo_sel - 1]);
+	if (src_voltage == data->req_voltage)
+		return 0;
+
+	switch (data->req_voltage) {
+	case 5000:
+		snk_sel = RT1719_SNKCAP_5V;
+		break;
+	case 9000:
+		snk_sel = RT1719_SNKCAP_9V;
+		break;
+	case 12000:
+		snk_sel = RT1719_SNKCAP_12V;
+		break;
+	case 15000:
+		snk_sel = RT1719_SNKCAP_15V;
+		break;
+	case 20000:
+		snk_sel = RT1719_SNKCAP_20V;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (!(data->snkcaps[snk_sel] & RT1719_PSEL_SUPPORT))
+		return -EINVAL;
+
+	for (i = 0; i < data->spdo_num; i++) {
+		enum pd_pdo_type type = pdo_type(data->spdos[i]);
+
+		if (type != PDO_TYPE_FIXED)
+			continue;
+
+		src_voltage = pdo_fixed_voltage(data->spdos[i]);
+		if (src_voltage == data->req_voltage) {
+			src_sel = i;
+			break;
+		}
+	}
+
+	if (src_sel == -1)
+		return -EOPNOTSUPP;
+
+	ret = regmap_update_bits(data->regmap, RT1719_REG_TXCTRL1,
+				 RT1719_EVALMODE_MASK | RT1719_REQSRCPDO_MASK,
+				 RT1719_EVALMODE_MASK | (src_sel + 1));
+	ret |= regmap_update_bits(data->regmap, RT1719_REG_TXCTRL2,
+				  RT1719_TXSPDOREQ_MASK, RT1719_TXSPDOREQ_MASK);
+	if (ret)
+		return ret;
+
+	reinit_completion(&data->req_completion);
+	ret = wait_for_completion_timeout(&data->req_completion,
+					  msecs_to_jiffies(400));
+	if (!ret)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int rt1719_psy_set_property(struct power_supply *psy,
+				   enum power_supply_property psp,
+				   const union power_supply_propval *val)
+{
+	struct rt1719_data *data = power_supply_get_drvdata(psy);
+
+	if (psp == POWER_SUPPLY_PROP_VOLTAGE_NOW) {
+		data->req_voltage = val->intval / 1000;
+		return rt1719_usbpd_request_voltage(data);
+	}
+
+	return -EINVAL;
+}
+
+static int rt1719_psy_get_property(struct power_supply *psy,
+				   enum power_supply_property psp,
+				   union power_supply_propval *val)
+{
+	struct rt1719_data *data = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = data->attached ? 1 : 0;
+		break;
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		val->intval = data->usb_type;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = data->voltage;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		val->intval = data->max_current;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = data->op_current;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static int rt1719_psy_property_is_writeable(struct power_supply *psy,
+					    enum power_supply_property psp)
+{
+	if (psp == POWER_SUPPLY_PROP_VOLTAGE_NOW)
+		return 1;
+	return 0;
+}
+
+static int devm_rt1719_psy_register(struct rt1719_data *data)
+{
+	struct power_supply_config psy_cfg = { };
+	char *psy_name;
+
+	psy_cfg.fwnode = dev_fwnode(data->dev);
+	psy_cfg.drv_data = data;
+
+	psy_name = devm_kasprintf(data->dev, GFP_KERNEL, "rt1719-source-psy-%s",
+				  dev_name(data->dev));
+	if (!psy_name)
+		return -ENOMEM;
+
+	data->psy_desc.name = psy_name;
+	data->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+	data->psy_desc.usb_types = rt1719_psy_usb_types;
+	data->psy_desc.num_usb_types = ARRAY_SIZE(rt1719_psy_usb_types);
+	data->psy_desc.properties = rt1719_psy_properties;
+	data->psy_desc.num_properties = ARRAY_SIZE(rt1719_psy_properties);
+	data->psy_desc.get_property = rt1719_psy_get_property;
+	data->psy_desc.set_property = rt1719_psy_set_property;
+	data->psy_desc.property_is_writeable = rt1719_psy_property_is_writeable;
+
+	data->usb_type = POWER_SUPPLY_USB_TYPE_C;
+
+	data->psy = devm_power_supply_register(data->dev, &data->psy_desc,
+					       &psy_cfg);
+
+	return PTR_ERR_OR_ZERO(data->psy);
+}
+
+static irqreturn_t rt1719_irq_handler(int irq, void *priv)
+{
+	struct rt1719_data *data = priv;
+	u32 events, conn_info;
+	u16 conn_stat;
+	int ret;
+
+	ret = rt1719_read32(data, RT1719_REG_EVENTS, &events);
+	ret |= rt1719_read32(data, RT1719_REG_POLICYINFO, &conn_info);
+	ret |= rt1719_read16(data, RT1719_REG_STATS, &conn_stat);
+	if (ret)
+		return IRQ_NONE;
+
+	data->conn_info = conn_info;
+	data->conn_stat = conn_stat;
+
+	events &= (RT1719_INT_DRSW_ACCEPT | RT1719_INT_RX_SRCCAP |
+		   RT1719_INT_VBUS_PRESENT | RT1719_INT_VBUS_DCT |
+		   RT1719_INT_PE_SNK_RDY);
+
+	if (events & RT1719_INT_DRSW_ACCEPT)
+		rt1719_update_data_role(data);
+
+	if (events & RT1719_INT_VBUS_PRESENT)
+		rt1719_attach(data);
+
+	if (events & RT1719_INT_VBUS_DCT)
+		rt1719_detach(data);
+
+	if (events & RT1719_INT_RX_SRCCAP)
+		rt1719_update_source_pdos(data);
+
+	if (events & RT1719_INT_PE_SNK_RDY) {
+		complete(&data->req_completion);
+		rt1719_update_pwr_opmode(data);
+	}
+
+	/* Write 1 to clear already handled events */
+	rt1719_write32(data, RT1719_REG_EVENTS, events);
+
+	return IRQ_HANDLED;
+}
+
+static int rt1719_irq_init(struct rt1719_data *data)
+{
+	struct i2c_client *i2c = to_i2c_client(data->dev);
+	u32 irq_enable;
+	int ret;
+
+	irq_enable = RT1719_INT_DRSW_ACCEPT | RT1719_INT_RX_SRCCAP |
+		     RT1719_INT_VBUS_DCT | RT1719_INT_VBUS_PRESENT |
+		     RT1719_INT_PE_SNK_RDY;
+
+	ret = rt1719_write32(data, RT1719_REG_MASKS, irq_enable);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to config irq enable\n");
+		return ret;
+	}
+
+	return devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
+					 rt1719_irq_handler, IRQF_ONESHOT,
+					 dev_name(&i2c->dev), data);
+}
+
+static int rt1719_init_attach_state(struct rt1719_data *data)
+{
+	u32 conn_info, irq_clear;
+	u16 conn_stat;
+	int ret;
+
+	irq_clear = RT1719_INT_DRSW_ACCEPT | RT1719_INT_RX_SRCCAP |
+		    RT1719_INT_VBUS_DCT | RT1719_INT_VBUS_PRESENT |
+		    RT1719_INT_PE_SNK_RDY;
+
+	ret = rt1719_read32(data, RT1719_REG_POLICYINFO, &conn_info);
+	ret |= rt1719_read16(data, RT1719_REG_STATS, &conn_stat);
+	ret |= rt1719_write32(data, RT1719_REG_EVENTS, irq_clear);
+	if (ret)
+		return ret;
+
+	data->conn_info = conn_info;
+	data->conn_stat = conn_stat;
+
+	if (conn_info & RT1719_ATTACHDEV_MASK)
+		rt1719_attach(data);
+
+	if (conn_info & RT1719_PE_EXP_CONTRACT) {
+		rt1719_update_source_pdos(data);
+		rt1719_update_pwr_opmode(data);
+	}
+
+	return 0;
+}
+
+#define RT1719_PSEL_CAPINFO(_lomask, _milliwatt, _himask, _milliamp) { \
+	.lomask		= _lomask, \
+	.milliwatt	= _milliwatt, \
+	.himask		= _himask, \
+	.milliamp	= _milliamp, \
+}
+
+static const struct rt1719_psel_cap rt1719_psel_caps[] = {
+	RT1719_PSEL_CAPINFO(0x18, 75000, 0x10, 5000),
+	RT1719_PSEL_CAPINFO(0x18, 60000, 0x10, 4500),
+	RT1719_PSEL_CAPINFO(0x18, 45000, 0x10, 4000),
+	RT1719_PSEL_CAPINFO(0x18, 30000, 0x10, 3500),
+	RT1719_PSEL_CAPINFO(0x18, 25000, 0x10, 3000),
+	RT1719_PSEL_CAPINFO(0x18, 20000, 0x10, 2500),
+	RT1719_PSEL_CAPINFO(0x18, 15000, 0x10, 2000),
+	RT1719_PSEL_CAPINFO(0x18, 10000, 0x10, 1000),
+	RT1719_PSEL_CAPINFO(0x1C, 60000, 0x1F, 5000),
+	RT1719_PSEL_CAPINFO(0x1C, 45000, 0x1F, 4500),
+	RT1719_PSEL_CAPINFO(0x1C, 30000, 0x1F, 4000),
+	RT1719_PSEL_CAPINFO(0x1C, 24000, 0x1F, 3500),
+	RT1719_PSEL_CAPINFO(0x1C, 15000, 0x1F, 3000),
+	RT1719_PSEL_CAPINFO(0x1C, 10000, 0x1F, 2500),
+	RT1719_PSEL_CAPINFO(0x0C, 60000, 0x1F, 2000),
+	RT1719_PSEL_CAPINFO(0x0C, 45000, 0x1F, 1000),
+	RT1719_PSEL_CAPINFO(0x0C, 36000, 0x08, 5000),
+	RT1719_PSEL_CAPINFO(0x0C, 30000, 0x08, 4500),
+	RT1719_PSEL_CAPINFO(0x0C, 24000, 0x08, 4000),
+	RT1719_PSEL_CAPINFO(0x0C, 15000, 0x08, 3500),
+	RT1719_PSEL_CAPINFO(0x0C, 10000, 0x08, 3000),
+	RT1719_PSEL_CAPINFO(0x1E, 45000, 0x08, 2500),
+	RT1719_PSEL_CAPINFO(0x1E, 36000, 0x08, 2000),
+	RT1719_PSEL_CAPINFO(0x1E, 27000, 0x08, 1500),
+	RT1719_PSEL_CAPINFO(0x1E, 20000, 0x08, 1000),
+	RT1719_PSEL_CAPINFO(0x1E, 15000, 0x0F, 5000),
+	RT1719_PSEL_CAPINFO(0x1E, 9000, 0x0F, 4500),
+	RT1719_PSEL_CAPINFO(0x0E, 45000, 0x0F, 4000),
+	RT1719_PSEL_CAPINFO(0x0E, 36000, 0x0F, 3500),
+	RT1719_PSEL_CAPINFO(0x0E, 27000, 0x0F, 3000),
+	RT1719_PSEL_CAPINFO(0x0E, 20000, 0x0F, 2500),
+	RT1719_PSEL_CAPINFO(0x0E, 15000, 0x0F, 2000),
+	RT1719_PSEL_CAPINFO(0x0E, 9000, 0x0F, 1500),
+	RT1719_PSEL_CAPINFO(0x06, 45000, 0x0F, 1000),
+	RT1719_PSEL_CAPINFO(0x06, 36000, 0x0F, 500),
+	RT1719_PSEL_CAPINFO(0x06, 27000, 0x04, 5000),
+	RT1719_PSEL_CAPINFO(0x06, 24000, 0x04, 4500),
+	RT1719_PSEL_CAPINFO(0x06, 18000, 0x04, 4000),
+	RT1719_PSEL_CAPINFO(0x06, 12000, 0x04, 3500),
+	RT1719_PSEL_CAPINFO(0x06, 9000, 0x04, 3000),
+	RT1719_PSEL_CAPINFO(0x1F, 25000, 0x04, 2500),
+	RT1719_PSEL_CAPINFO(0x1F, 20000, 0x04, 2000),
+	RT1719_PSEL_CAPINFO(0x1F, 15000, 0x04, 1500),
+	RT1719_PSEL_CAPINFO(0x1F, 10000, 0x04, 1000),
+	RT1719_PSEL_CAPINFO(0x1F, 7500, 0x07, 5000),
+	RT1719_PSEL_CAPINFO(0x0F, 25000, 0x07, 4500),
+	RT1719_PSEL_CAPINFO(0x0F, 20000, 0x07, 4000),
+	RT1719_PSEL_CAPINFO(0x0F, 15000, 0x07, 3500),
+	RT1719_PSEL_CAPINFO(0x0F, 10000, 0x07, 3000),
+	RT1719_PSEL_CAPINFO(0x0F, 7500, 0x07, 2500),
+	RT1719_PSEL_CAPINFO(0x07, 25000, 0x07, 2000),
+	RT1719_PSEL_CAPINFO(0x07, 20000, 0x07, 1500),
+	RT1719_PSEL_CAPINFO(0x07, 15000, 0x07, 1000),
+	RT1719_PSEL_CAPINFO(0x07, 10000, 0x07, 500),
+	RT1719_PSEL_CAPINFO(0x07, 7500, 0x03, 5000),
+	RT1719_PSEL_CAPINFO(0x03, 25000, 0x03, 4500),
+	RT1719_PSEL_CAPINFO(0x03, 20000, 0x03, 4000),
+	RT1719_PSEL_CAPINFO(0x03, 15000, 0x03, 3500),
+	RT1719_PSEL_CAPINFO(0x03, 10000, 0x03, 3000),
+	RT1719_PSEL_CAPINFO(0x03, 7500, 0x03, 2500),
+	RT1719_PSEL_CAPINFO(0x01, 15000, 0x03, 2000),
+	RT1719_PSEL_CAPINFO(0x01, 10000, 0x03, 1500),
+	RT1719_PSEL_CAPINFO(0x01, 7500, 0x03, 1000),
+	RT1719_PSEL_CAPINFO(0x01, 2500, 0x03, 500)
+};
+
+static u16 rt1719_gen_snkcap_by_current(const struct rt1719_psel_cap *psel_cap,
+					enum rt1719_snkcap capsel)
+{
+	u16 cap = RT1719_PSEL_SUPPORT;
+
+	if (!(psel_cap->himask & BIT(capsel)))
+		return 0;
+
+	cap |= psel_cap->milliamp / 10;
+	return cap;
+}
+
+static u16 rt1719_gen_snkcap_by_watt(const struct rt1719_psel_cap *psel_cap,
+				     enum rt1719_snkcap capsel)
+{
+	u32 volt_div[RT1719_MAX_SNKCAP] = { 5, 9, 12, 15, 20 };
+	u16 cap = RT1719_PSEL_SUPPORT;
+
+	if (!(psel_cap->lomask & BIT(capsel)))
+		return 0;
+
+	cap |= min(psel_cap->milliwatt / volt_div[capsel], (u32)5000) / 10;
+	return cap;
+}
+
+static u16 rt1719_gen_snkcap(unsigned int pselinfo, enum rt1719_snkcap capsel)
+{
+	int psel = FIELD_GET(RT1719_LATPSEL_MASK, pselinfo);
+	const struct rt1719_psel_cap *psel_cap;
+	bool by_current = false;
+
+	if (pselinfo & RT1719_TBLSEL_MASK)
+		by_current = true;
+
+	psel_cap = rt1719_psel_caps + psel;
+	if (by_current)
+		return rt1719_gen_snkcap_by_current(psel_cap, capsel);
+
+	return rt1719_gen_snkcap_by_watt(psel_cap, capsel);
+}
+
+static int rt1719_get_caps(struct rt1719_data *data)
+{
+	unsigned int pselinfo, usbinfo;
+	int i, ret;
+
+	ret = regmap_read(data->regmap, RT1719_REG_PSELINFO, &pselinfo);
+	ret |= regmap_read(data->regmap, RT1719_REG_USBSETINFO, &usbinfo);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < RT1719_MAX_SNKCAP; i++)
+		data->snkcaps[i] = rt1719_gen_snkcap(pselinfo, i);
+
+	usbinfo = FIELD_GET(RT1719_USBINFO_MASK, usbinfo);
+	if (usbinfo == RT1719_USB_DFPUFP)
+		data->drswap_support = true;
+
+	return 0;
+}
+
+static int rt1719_check_exist(struct rt1719_data *data)
+{
+	u16 pid;
+	int ret;
+
+	ret = rt1719_read16(data, RT1719_REG_VENID, &pid);
+	if (ret)
+		return ret;
+
+	if (pid != RT1719_UNIQUE_PID) {
+		dev_err(data->dev, "Incorrect PID 0x%04x\n", pid);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static const struct regmap_config rt1719_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0xff,
+};
+
+static int rt1719_probe(struct i2c_client *i2c)
+{
+	struct rt1719_data *data;
+	struct fwnode_handle *fwnode;
+	struct typec_capability typec_cap = { };
+	int ret;
+
+	data = devm_kzalloc(&i2c->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->dev = &i2c->dev;
+	init_completion(&data->req_completion);
+
+	data->regmap = devm_regmap_init_i2c(i2c, &rt1719_regmap_config);
+	if (IS_ERR(data->regmap)) {
+		ret = PTR_ERR(data->regmap);
+		dev_err(&i2c->dev, "Failed to init regmap (%d)\n", ret);
+		return ret;
+	}
+
+	ret = rt1719_check_exist(data);
+	if (ret)
+		return ret;
+
+	ret = rt1719_get_caps(data);
+	if (ret)
+		return ret;
+
+	fwnode = device_get_named_child_node(&i2c->dev, "connector");
+	if (!fwnode)
+		return -ENODEV;
+
+	data->role_sw = fwnode_usb_role_switch_get(fwnode);
+	if (IS_ERR(data->role_sw)) {
+		ret = PTR_ERR(data->role_sw);
+		dev_err(&i2c->dev, "Failed to get usb role switch (%d)\n", ret);
+		goto err_fwnode_put;
+	}
+
+	ret = devm_rt1719_psy_register(data);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to register psy (%d)\n", ret);
+		goto err_role_put;
+	}
+
+	typec_cap.revision = USB_TYPEC_REV_1_2;
+	typec_cap.pd_revision = 0x300;	/* USB-PD spec release 3.0 */
+	typec_cap.type = TYPEC_PORT_SNK;
+	typec_cap.data = TYPEC_PORT_DRD;
+	typec_cap.ops = &rt1719_port_ops;
+	typec_cap.fwnode = fwnode;
+	typec_cap.driver_data = data;
+	typec_cap.accessory[0] = TYPEC_ACCESSORY_DEBUG;
+
+	data->partner_desc.identity = &data->partner_ident;
+
+	data->port = typec_register_port(&i2c->dev, &typec_cap);
+	if (IS_ERR(data->port)) {
+		ret = PTR_ERR(data->port);
+		dev_err(&i2c->dev, "Failed to register typec port (%d)\n", ret);
+		goto err_role_put;
+	}
+
+	ret = rt1719_init_attach_state(data);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to init attach state (%d)\n", ret);
+		goto err_role_put;
+	}
+
+	ret = rt1719_irq_init(data);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to init irq\n");
+		goto err_role_put;
+	}
+
+	fwnode_handle_put(fwnode);
+
+	i2c_set_clientdata(i2c, data);
+
+	return 0;
+
+err_role_put:
+	usb_role_switch_put(data->role_sw);
+err_fwnode_put:
+	fwnode_handle_put(fwnode);
+
+	return ret;
+}
+
+static void rt1719_remove(struct i2c_client *i2c)
+{
+	struct rt1719_data *data = i2c_get_clientdata(i2c);
+
+	typec_unregister_port(data->port);
+	usb_role_switch_put(data->role_sw);
+}
+
+static const struct of_device_id __maybe_unused rt1719_device_table[] = {
+	{ .compatible = "richtek,rt1719", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rt1719_device_table);
+
+static struct i2c_driver rt1719_driver = {
+	.driver = {
+		.name = "rt1719",
+		.of_match_table = rt1719_device_table,
+	},
+	.probe_new = rt1719_probe,
+	.remove = rt1719_remove,
+};
+module_i2c_driver(rt1719_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("Richtek RT1719 Sink Only USBPD Controller Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/typec/stusb160x.c b/drivers/usb/typec/stusb160x.c
new file mode 100644
index 000000000..494b37115
--- /dev/null
+++ b/drivers/usb/typec/stusb160x.c
@@ -0,0 +1,880 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * STMicroelectronics STUSB160x Type-C controller family driver
+ *
+ * Copyright (C) 2020, STMicroelectronics
+ * Author(s): Amelie Delaunay <amelie.delaunay@st.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/role.h>
+#include <linux/usb/typec.h>
+
+#define STUSB160X_ALERT_STATUS			0x0B /* RC */
+#define STUSB160X_ALERT_STATUS_MASK_CTRL	0x0C /* RW */
+#define STUSB160X_CC_CONNECTION_STATUS_TRANS	0x0D /* RC */
+#define STUSB160X_CC_CONNECTION_STATUS		0x0E /* RO */
+#define STUSB160X_MONITORING_STATUS_TRANS	0x0F /* RC */
+#define STUSB160X_MONITORING_STATUS		0x10 /* RO */
+#define STUSB160X_CC_OPERATION_STATUS		0x11 /* RO */
+#define STUSB160X_HW_FAULT_STATUS_TRANS		0x12 /* RC */
+#define STUSB160X_HW_FAULT_STATUS		0x13 /* RO */
+#define STUSB160X_CC_CAPABILITY_CTRL		0x18 /* RW */
+#define STUSB160X_CC_VCONN_SWITCH_CTRL		0x1E /* RW */
+#define STUSB160X_VCONN_MONITORING_CTRL		0x20 /* RW */
+#define STUSB160X_VBUS_MONITORING_RANGE_CTRL	0x22 /* RW */
+#define STUSB160X_RESET_CTRL			0x23 /* RW */
+#define STUSB160X_VBUS_DISCHARGE_TIME_CTRL	0x25 /* RW */
+#define STUSB160X_VBUS_DISCHARGE_STATUS		0x26 /* RO */
+#define STUSB160X_VBUS_ENABLE_STATUS		0x27 /* RO */
+#define STUSB160X_CC_POWER_MODE_CTRL		0x28 /* RW */
+#define STUSB160X_VBUS_MONITORING_CTRL		0x2E /* RW */
+#define STUSB1600_REG_MAX			0x2F /* RO - Reserved */
+
+/* STUSB160X_ALERT_STATUS/STUSB160X_ALERT_STATUS_MASK_CTRL bitfields */
+#define STUSB160X_HW_FAULT			BIT(4)
+#define STUSB160X_MONITORING			BIT(5)
+#define STUSB160X_CC_CONNECTION			BIT(6)
+#define STUSB160X_ALL_ALERTS			GENMASK(6, 4)
+
+/* STUSB160X_CC_CONNECTION_STATUS_TRANS bitfields */
+#define STUSB160X_CC_ATTACH_TRANS		BIT(0)
+
+/* STUSB160X_CC_CONNECTION_STATUS bitfields */
+#define STUSB160X_CC_ATTACH			BIT(0)
+#define STUSB160X_CC_VCONN_SUPPLY		BIT(1)
+#define STUSB160X_CC_DATA_ROLE(s)		(!!((s) & BIT(2)))
+#define STUSB160X_CC_POWER_ROLE(s)		(!!((s) & BIT(3)))
+#define STUSB160X_CC_ATTACHED_MODE		GENMASK(7, 5)
+
+/* STUSB160X_MONITORING_STATUS_TRANS bitfields */
+#define STUSB160X_VCONN_PRESENCE_TRANS		BIT(0)
+#define STUSB160X_VBUS_PRESENCE_TRANS		BIT(1)
+#define STUSB160X_VBUS_VSAFE0V_TRANS		BIT(2)
+#define STUSB160X_VBUS_VALID_TRANS		BIT(3)
+
+/* STUSB160X_MONITORING_STATUS bitfields */
+#define STUSB160X_VCONN_PRESENCE		BIT(0)
+#define STUSB160X_VBUS_PRESENCE			BIT(1)
+#define STUSB160X_VBUS_VSAFE0V			BIT(2)
+#define STUSB160X_VBUS_VALID			BIT(3)
+
+/* STUSB160X_CC_OPERATION_STATUS bitfields */
+#define STUSB160X_TYPEC_FSM_STATE		GENMASK(4, 0)
+#define STUSB160X_SINK_POWER_STATE		GENMASK(6, 5)
+#define STUSB160X_CC_ATTACHED			BIT(7)
+
+/* STUSB160X_HW_FAULT_STATUS_TRANS bitfields */
+#define STUSB160X_VCONN_SW_OVP_FAULT_TRANS	BIT(0)
+#define STUSB160X_VCONN_SW_OCP_FAULT_TRANS	BIT(1)
+#define STUSB160X_VCONN_SW_RVP_FAULT_TRANS	BIT(2)
+#define STUSB160X_VPU_VALID_TRANS		BIT(4)
+#define STUSB160X_VPU_OVP_FAULT_TRANS		BIT(5)
+#define STUSB160X_THERMAL_FAULT			BIT(7)
+
+/* STUSB160X_HW_FAULT_STATUS bitfields */
+#define STUSB160X_VCONN_SW_OVP_FAULT_CC2	BIT(0)
+#define STUSB160X_VCONN_SW_OVP_FAULT_CC1	BIT(1)
+#define STUSB160X_VCONN_SW_OCP_FAULT_CC2	BIT(2)
+#define STUSB160X_VCONN_SW_OCP_FAULT_CC1	BIT(3)
+#define STUSB160X_VCONN_SW_RVP_FAULT_CC2	BIT(4)
+#define STUSB160X_VCONN_SW_RVP_FAULT_CC1	BIT(5)
+#define STUSB160X_VPU_VALID			BIT(6)
+#define STUSB160X_VPU_OVP_FAULT			BIT(7)
+
+/* STUSB160X_CC_CAPABILITY_CTRL bitfields */
+#define STUSB160X_CC_VCONN_SUPPLY_EN		BIT(0)
+#define STUSB160X_CC_VCONN_DISCHARGE_EN		BIT(4)
+#define STUSB160X_CC_CURRENT_ADVERTISED		GENMASK(7, 6)
+
+/* STUSB160X_VCONN_SWITCH_CTRL bitfields */
+#define STUSB160X_CC_VCONN_SWITCH_ILIM		GENMASK(3, 0)
+
+/* STUSB160X_VCONN_MONITORING_CTRL bitfields */
+#define STUSB160X_VCONN_UVLO_THRESHOLD		BIT(6)
+#define STUSB160X_VCONN_MONITORING_EN		BIT(7)
+
+/* STUSB160X_VBUS_MONITORING_RANGE_CTRL bitfields */
+#define STUSB160X_SHIFT_LOW_VBUS_LIMIT		GENMASK(3, 0)
+#define STUSB160X_SHIFT_HIGH_VBUS_LIMIT		GENMASK(7, 4)
+
+/* STUSB160X_RESET_CTRL bitfields */
+#define STUSB160X_SW_RESET_EN			BIT(0)
+
+/* STUSB160X_VBUS_DISCHARGE_TIME_CTRL bitfields */
+#define STUSBXX02_VBUS_DISCHARGE_TIME_TO_PDO	GENMASK(3, 0)
+#define STUSB160X_VBUS_DISCHARGE_TIME_TO_0V	GENMASK(7, 4)
+
+/* STUSB160X_VBUS_DISCHARGE_STATUS bitfields */
+#define STUSB160X_VBUS_DISCHARGE_EN		BIT(7)
+
+/* STUSB160X_VBUS_ENABLE_STATUS bitfields */
+#define STUSB160X_VBUS_SOURCE_EN		BIT(0)
+#define STUSB160X_VBUS_SINK_EN			BIT(1)
+
+/* STUSB160X_CC_POWER_MODE_CTRL bitfields */
+#define STUSB160X_CC_POWER_MODE			GENMASK(2, 0)
+
+/* STUSB160X_VBUS_MONITORING_CTRL bitfields */
+#define STUSB160X_VDD_UVLO_DISABLE		BIT(0)
+#define STUSB160X_VBUS_VSAFE0V_THRESHOLD	GENMASK(2, 1)
+#define STUSB160X_VBUS_RANGE_DISABLE		BIT(4)
+#define STUSB160X_VDD_OVLO_DISABLE		BIT(6)
+
+enum stusb160x_pwr_mode {
+	SOURCE_WITH_ACCESSORY,
+	SINK_WITH_ACCESSORY,
+	SINK_WITHOUT_ACCESSORY,
+	DUAL_WITH_ACCESSORY,
+	DUAL_WITH_ACCESSORY_AND_TRY_SRC,
+	DUAL_WITH_ACCESSORY_AND_TRY_SNK,
+};
+
+enum stusb160x_attached_mode {
+	NO_DEVICE_ATTACHED,
+	SINK_ATTACHED,
+	SOURCE_ATTACHED,
+	DEBUG_ACCESSORY_ATTACHED,
+	AUDIO_ACCESSORY_ATTACHED,
+};
+
+struct stusb160x {
+	struct device		*dev;
+	struct regmap		*regmap;
+	struct regulator	*vdd_supply;
+	struct regulator	*vsys_supply;
+	struct regulator	*vconn_supply;
+	struct regulator	*main_supply;
+
+	struct typec_port	*port;
+	struct typec_capability capability;
+	struct typec_partner	*partner;
+
+	enum typec_port_type	port_type;
+	enum typec_pwr_opmode	pwr_opmode;
+	bool			vbus_on;
+
+	struct usb_role_switch	*role_sw;
+};
+
+static bool stusb160x_reg_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case STUSB160X_ALERT_STATUS_MASK_CTRL:
+	case STUSB160X_CC_CAPABILITY_CTRL:
+	case STUSB160X_CC_VCONN_SWITCH_CTRL:
+	case STUSB160X_VCONN_MONITORING_CTRL:
+	case STUSB160X_VBUS_MONITORING_RANGE_CTRL:
+	case STUSB160X_RESET_CTRL:
+	case STUSB160X_VBUS_DISCHARGE_TIME_CTRL:
+	case STUSB160X_CC_POWER_MODE_CTRL:
+	case STUSB160X_VBUS_MONITORING_CTRL:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool stusb160x_reg_readable(struct device *dev, unsigned int reg)
+{
+	if (reg <= 0x0A ||
+	    (reg >= 0x14 && reg <= 0x17) ||
+	    (reg >= 0x19 && reg <= 0x1D) ||
+	    (reg >= 0x29 && reg <= 0x2D) ||
+	    (reg == 0x1F || reg == 0x21 || reg == 0x24 || reg == 0x2F))
+		return false;
+	else
+		return true;
+}
+
+static bool stusb160x_reg_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case STUSB160X_ALERT_STATUS:
+	case STUSB160X_CC_CONNECTION_STATUS_TRANS:
+	case STUSB160X_CC_CONNECTION_STATUS:
+	case STUSB160X_MONITORING_STATUS_TRANS:
+	case STUSB160X_MONITORING_STATUS:
+	case STUSB160X_CC_OPERATION_STATUS:
+	case STUSB160X_HW_FAULT_STATUS_TRANS:
+	case STUSB160X_HW_FAULT_STATUS:
+	case STUSB160X_VBUS_DISCHARGE_STATUS:
+	case STUSB160X_VBUS_ENABLE_STATUS:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool stusb160x_reg_precious(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case STUSB160X_ALERT_STATUS:
+	case STUSB160X_CC_CONNECTION_STATUS_TRANS:
+	case STUSB160X_MONITORING_STATUS_TRANS:
+	case STUSB160X_HW_FAULT_STATUS_TRANS:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config stusb1600_regmap_config = {
+	.reg_bits	= 8,
+	.reg_stride	= 1,
+	.val_bits	= 8,
+	.max_register	= STUSB1600_REG_MAX,
+	.writeable_reg	= stusb160x_reg_writeable,
+	.readable_reg	= stusb160x_reg_readable,
+	.volatile_reg	= stusb160x_reg_volatile,
+	.precious_reg	= stusb160x_reg_precious,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static bool stusb160x_get_vconn(struct stusb160x *chip)
+{
+	u32 val;
+	int ret;
+
+	ret = regmap_read(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, &val);
+	if (ret) {
+		dev_err(chip->dev, "Unable to get Vconn status: %d\n", ret);
+		return false;
+	}
+
+	return !!FIELD_GET(STUSB160X_CC_VCONN_SUPPLY_EN, val);
+}
+
+static int stusb160x_set_vconn(struct stusb160x *chip, bool on)
+{
+	int ret;
+
+	/* Manage VCONN input supply */
+	if (chip->vconn_supply) {
+		if (on) {
+			ret = regulator_enable(chip->vconn_supply);
+			if (ret) {
+				dev_err(chip->dev,
+					"failed to enable vconn supply: %d\n",
+					ret);
+				return ret;
+			}
+		} else {
+			regulator_disable(chip->vconn_supply);
+		}
+	}
+
+	/* Manage VCONN monitoring and power path */
+	ret = regmap_update_bits(chip->regmap, STUSB160X_VCONN_MONITORING_CTRL,
+				 STUSB160X_VCONN_MONITORING_EN,
+				 on ? STUSB160X_VCONN_MONITORING_EN : 0);
+	if (ret)
+		goto vconn_reg_disable;
+
+	return 0;
+
+vconn_reg_disable:
+	if (chip->vconn_supply && on)
+		regulator_disable(chip->vconn_supply);
+
+	return ret;
+}
+
+static enum typec_pwr_opmode stusb160x_get_pwr_opmode(struct stusb160x *chip)
+{
+	u32 val;
+	int ret;
+
+	ret = regmap_read(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, &val);
+	if (ret) {
+		dev_err(chip->dev, "Unable to get pwr opmode: %d\n", ret);
+		return TYPEC_PWR_MODE_USB;
+	}
+
+	return FIELD_GET(STUSB160X_CC_CURRENT_ADVERTISED, val);
+}
+
+static enum typec_accessory stusb160x_get_accessory(u32 status)
+{
+	enum stusb160x_attached_mode mode;
+
+	mode = FIELD_GET(STUSB160X_CC_ATTACHED_MODE, status);
+
+	switch (mode) {
+	case DEBUG_ACCESSORY_ATTACHED:
+		return TYPEC_ACCESSORY_DEBUG;
+	case AUDIO_ACCESSORY_ATTACHED:
+		return TYPEC_ACCESSORY_AUDIO;
+	default:
+		return TYPEC_ACCESSORY_NONE;
+	}
+}
+
+static enum typec_role stusb160x_get_vconn_role(u32 status)
+{
+	if (FIELD_GET(STUSB160X_CC_VCONN_SUPPLY, status))
+		return TYPEC_SOURCE;
+
+	return TYPEC_SINK;
+}
+
+static void stusb160x_set_data_role(struct stusb160x *chip,
+				    enum typec_data_role data_role,
+				    bool attached)
+{
+	enum usb_role usb_role = USB_ROLE_NONE;
+
+	if (attached) {
+		if (data_role == TYPEC_HOST)
+			usb_role = USB_ROLE_HOST;
+		else
+			usb_role = USB_ROLE_DEVICE;
+	}
+
+	usb_role_switch_set_role(chip->role_sw, usb_role);
+	typec_set_data_role(chip->port, data_role);
+}
+
+static int stusb160x_attach(struct stusb160x *chip, u32 status)
+{
+	struct typec_partner_desc desc;
+	int ret;
+
+	if ((STUSB160X_CC_POWER_ROLE(status) == TYPEC_SOURCE) &&
+	    chip->vdd_supply) {
+		ret = regulator_enable(chip->vdd_supply);
+		if (ret) {
+			dev_err(chip->dev,
+				"Failed to enable Vbus supply: %d\n", ret);
+			return ret;
+		}
+		chip->vbus_on = true;
+	}
+
+	desc.usb_pd = false;
+	desc.accessory = stusb160x_get_accessory(status);
+	desc.identity = NULL;
+
+	chip->partner = typec_register_partner(chip->port, &desc);
+	if (IS_ERR(chip->partner)) {
+		ret = PTR_ERR(chip->partner);
+		goto vbus_disable;
+	}
+
+	typec_set_pwr_role(chip->port, STUSB160X_CC_POWER_ROLE(status));
+	typec_set_pwr_opmode(chip->port, stusb160x_get_pwr_opmode(chip));
+	typec_set_vconn_role(chip->port, stusb160x_get_vconn_role(status));
+	stusb160x_set_data_role(chip, STUSB160X_CC_DATA_ROLE(status), true);
+
+	return 0;
+
+vbus_disable:
+	if (chip->vbus_on) {
+		regulator_disable(chip->vdd_supply);
+		chip->vbus_on = false;
+	}
+
+	return ret;
+}
+
+static void stusb160x_detach(struct stusb160x *chip, u32 status)
+{
+	typec_unregister_partner(chip->partner);
+	chip->partner = NULL;
+
+	typec_set_pwr_role(chip->port, STUSB160X_CC_POWER_ROLE(status));
+	typec_set_pwr_opmode(chip->port, TYPEC_PWR_MODE_USB);
+	typec_set_vconn_role(chip->port, stusb160x_get_vconn_role(status));
+	stusb160x_set_data_role(chip, STUSB160X_CC_DATA_ROLE(status), false);
+
+	if (chip->vbus_on) {
+		regulator_disable(chip->vdd_supply);
+		chip->vbus_on = false;
+	}
+}
+
+static irqreturn_t stusb160x_irq_handler(int irq, void *data)
+{
+	struct stusb160x *chip = data;
+	u32 pending, trans, status;
+	int ret;
+
+	ret = regmap_read(chip->regmap, STUSB160X_ALERT_STATUS, &pending);
+	if (ret)
+		goto err;
+
+	if (pending & STUSB160X_CC_CONNECTION) {
+		ret = regmap_read(chip->regmap,
+				  STUSB160X_CC_CONNECTION_STATUS_TRANS, &trans);
+		if (ret)
+			goto err;
+		ret = regmap_read(chip->regmap,
+				  STUSB160X_CC_CONNECTION_STATUS, &status);
+		if (ret)
+			goto err;
+
+		if (trans & STUSB160X_CC_ATTACH_TRANS) {
+			if (status & STUSB160X_CC_ATTACH) {
+				ret = stusb160x_attach(chip, status);
+				if (ret)
+					goto err;
+			} else {
+				stusb160x_detach(chip, status);
+			}
+		}
+	}
+err:
+	return IRQ_HANDLED;
+}
+
+static int stusb160x_irq_init(struct stusb160x *chip, int irq)
+{
+	u32 status;
+	int ret;
+
+	ret = regmap_read(chip->regmap,
+			  STUSB160X_CC_CONNECTION_STATUS, &status);
+	if (ret)
+		return ret;
+
+	if (status & STUSB160X_CC_ATTACH) {
+		ret = stusb160x_attach(chip, status);
+		if (ret)
+			dev_err(chip->dev, "attach failed: %d\n", ret);
+	}
+
+	ret = devm_request_threaded_irq(chip->dev, irq, NULL,
+					stusb160x_irq_handler, IRQF_ONESHOT,
+					dev_name(chip->dev), chip);
+	if (ret)
+		goto partner_unregister;
+
+	/* Unmask CC_CONNECTION events */
+	ret = regmap_write_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL,
+				STUSB160X_CC_CONNECTION, 0);
+	if (ret)
+		goto partner_unregister;
+
+	return 0;
+
+partner_unregister:
+	if (chip->partner) {
+		typec_unregister_partner(chip->partner);
+		chip->partner = NULL;
+	}
+
+	return ret;
+}
+
+static int stusb160x_chip_init(struct stusb160x *chip)
+{
+	u32 val;
+	int ret;
+
+	/* Change the default Type-C power mode */
+	if (chip->port_type == TYPEC_PORT_SRC)
+		ret = regmap_update_bits(chip->regmap,
+					 STUSB160X_CC_POWER_MODE_CTRL,
+					 STUSB160X_CC_POWER_MODE,
+					 SOURCE_WITH_ACCESSORY);
+	else if (chip->port_type == TYPEC_PORT_SNK)
+		ret = regmap_update_bits(chip->regmap,
+					 STUSB160X_CC_POWER_MODE_CTRL,
+					 STUSB160X_CC_POWER_MODE,
+					 SINK_WITH_ACCESSORY);
+	else /* (chip->port_type == TYPEC_PORT_DRP) */
+		ret = regmap_update_bits(chip->regmap,
+					 STUSB160X_CC_POWER_MODE_CTRL,
+					 STUSB160X_CC_POWER_MODE,
+					 DUAL_WITH_ACCESSORY);
+	if (ret)
+		return ret;
+
+	if (chip->port_type == TYPEC_PORT_SNK)
+		goto skip_src;
+
+	/* Change the default Type-C Source power operation mode capability */
+	ret = regmap_update_bits(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL,
+				 STUSB160X_CC_CURRENT_ADVERTISED,
+				 FIELD_PREP(STUSB160X_CC_CURRENT_ADVERTISED,
+					    chip->pwr_opmode));
+	if (ret)
+		return ret;
+
+	/* Manage Type-C Source Vconn supply */
+	if (stusb160x_get_vconn(chip)) {
+		ret = stusb160x_set_vconn(chip, true);
+		if (ret)
+			return ret;
+	}
+
+skip_src:
+	/* Mask all events interrupts - to be unmasked with interrupt support */
+	ret = regmap_update_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL,
+				 STUSB160X_ALL_ALERTS, STUSB160X_ALL_ALERTS);
+	if (ret)
+		return ret;
+
+	/* Read status at least once to clear any stale interrupts */
+	regmap_read(chip->regmap, STUSB160X_ALERT_STATUS, &val);
+	regmap_read(chip->regmap, STUSB160X_CC_CONNECTION_STATUS_TRANS, &val);
+	regmap_read(chip->regmap, STUSB160X_MONITORING_STATUS_TRANS, &val);
+	regmap_read(chip->regmap, STUSB160X_HW_FAULT_STATUS_TRANS, &val);
+
+	return 0;
+}
+
+static int stusb160x_get_fw_caps(struct stusb160x *chip,
+				 struct fwnode_handle *fwnode)
+{
+	const char *cap_str;
+	int ret;
+
+	chip->capability.fwnode = fwnode;
+
+	/*
+	 * Supported port type can be configured through device tree
+	 * else it is read from chip registers in stusb160x_get_caps.
+	 */
+	ret = fwnode_property_read_string(fwnode, "power-role", &cap_str);
+	if (!ret) {
+		ret = typec_find_port_power_role(cap_str);
+		if (ret < 0)
+			return ret;
+		chip->port_type = ret;
+	}
+	chip->capability.type = chip->port_type;
+
+	/* Skip DRP/Source capabilities in case of Sink only */
+	if (chip->port_type == TYPEC_PORT_SNK)
+		return 0;
+
+	if (chip->port_type == TYPEC_PORT_DRP)
+		chip->capability.prefer_role = TYPEC_SINK;
+
+	/*
+	 * Supported power operation mode can be configured through device tree
+	 * else it is read from chip registers in stusb160x_get_caps.
+	 */
+	ret = fwnode_property_read_string(fwnode, "typec-power-opmode", &cap_str);
+	if (!ret) {
+		ret = typec_find_pwr_opmode(cap_str);
+		/* Power delivery not yet supported */
+		if (ret < 0 || ret == TYPEC_PWR_MODE_PD) {
+			dev_err(chip->dev, "bad power operation mode: %d\n", ret);
+			return -EINVAL;
+		}
+		chip->pwr_opmode = ret;
+	}
+
+	return 0;
+}
+
+static int stusb160x_get_caps(struct stusb160x *chip)
+{
+	enum typec_port_type *type = &chip->capability.type;
+	enum typec_port_data *data = &chip->capability.data;
+	enum typec_accessory *accessory = chip->capability.accessory;
+	u32 val;
+	int ret;
+
+	chip->capability.revision = USB_TYPEC_REV_1_2;
+
+	ret = regmap_read(chip->regmap, STUSB160X_CC_POWER_MODE_CTRL, &val);
+	if (ret)
+		return ret;
+
+	switch (FIELD_GET(STUSB160X_CC_POWER_MODE, val)) {
+	case SOURCE_WITH_ACCESSORY:
+		*type = TYPEC_PORT_SRC;
+		*data = TYPEC_PORT_DFP;
+		*accessory++ = TYPEC_ACCESSORY_AUDIO;
+		*accessory++ = TYPEC_ACCESSORY_DEBUG;
+		break;
+	case SINK_WITH_ACCESSORY:
+		*type = TYPEC_PORT_SNK;
+		*data = TYPEC_PORT_UFP;
+		*accessory++ = TYPEC_ACCESSORY_AUDIO;
+		*accessory++ = TYPEC_ACCESSORY_DEBUG;
+		break;
+	case SINK_WITHOUT_ACCESSORY:
+		*type = TYPEC_PORT_SNK;
+		*data = TYPEC_PORT_UFP;
+		break;
+	case DUAL_WITH_ACCESSORY:
+	case DUAL_WITH_ACCESSORY_AND_TRY_SRC:
+	case DUAL_WITH_ACCESSORY_AND_TRY_SNK:
+		*type = TYPEC_PORT_DRP;
+		*data = TYPEC_PORT_DRD;
+		*accessory++ = TYPEC_ACCESSORY_AUDIO;
+		*accessory++ = TYPEC_ACCESSORY_DEBUG;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	chip->port_type = *type;
+	chip->pwr_opmode = stusb160x_get_pwr_opmode(chip);
+
+	return 0;
+}
+
+static const struct of_device_id stusb160x_of_match[] = {
+	{ .compatible = "st,stusb1600", .data = &stusb1600_regmap_config},
+	{},
+};
+MODULE_DEVICE_TABLE(of, stusb160x_of_match);
+
+static int stusb160x_probe(struct i2c_client *client)
+{
+	struct stusb160x *chip;
+	const struct of_device_id *match;
+	struct regmap_config *regmap_config;
+	struct fwnode_handle *fwnode;
+	int ret;
+
+	chip = devm_kzalloc(&client->dev, sizeof(struct stusb160x), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, chip);
+
+	match = i2c_of_match_device(stusb160x_of_match, client);
+	regmap_config = (struct regmap_config *)match->data;
+	chip->regmap = devm_regmap_init_i2c(client, regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		ret = PTR_ERR(chip->regmap);
+		dev_err(&client->dev,
+			"Failed to allocate register map:%d\n", ret);
+		return ret;
+	}
+
+	chip->dev = &client->dev;
+
+	chip->vsys_supply = devm_regulator_get_optional(chip->dev, "vsys");
+	if (IS_ERR(chip->vsys_supply)) {
+		ret = PTR_ERR(chip->vsys_supply);
+		if (ret != -ENODEV)
+			return ret;
+		chip->vsys_supply = NULL;
+	}
+
+	chip->vdd_supply = devm_regulator_get_optional(chip->dev, "vdd");
+	if (IS_ERR(chip->vdd_supply)) {
+		ret = PTR_ERR(chip->vdd_supply);
+		if (ret != -ENODEV)
+			return ret;
+		chip->vdd_supply = NULL;
+	}
+
+	chip->vconn_supply = devm_regulator_get_optional(chip->dev, "vconn");
+	if (IS_ERR(chip->vconn_supply)) {
+		ret = PTR_ERR(chip->vconn_supply);
+		if (ret != -ENODEV)
+			return ret;
+		chip->vconn_supply = NULL;
+	}
+
+	fwnode = device_get_named_child_node(chip->dev, "connector");
+	if (!fwnode)
+		return -ENODEV;
+
+	/*
+	 * This fwnode has a "compatible" property, but is never populated as a
+	 * struct device. Instead we simply parse it to read the properties.
+	 * This it breaks fw_devlink=on. To maintain backward compatibility
+	 * with existing DT files, we work around this by deleting any
+	 * fwnode_links to/from this fwnode.
+	 */
+	fw_devlink_purge_absent_suppliers(fwnode);
+
+	/*
+	 * When both VDD and VSYS power supplies are present, the low power
+	 * supply VSYS is selected when VSYS voltage is above 3.1 V.
+	 * Otherwise VDD is selected.
+	 */
+	if (chip->vdd_supply &&
+	    (!chip->vsys_supply ||
+	     (regulator_get_voltage(chip->vsys_supply) <= 3100000)))
+		chip->main_supply = chip->vdd_supply;
+	else
+		chip->main_supply = chip->vsys_supply;
+
+	if (chip->main_supply) {
+		ret = regulator_enable(chip->main_supply);
+		if (ret) {
+			dev_err(chip->dev,
+				"Failed to enable main supply: %d\n", ret);
+			goto fwnode_put;
+		}
+	}
+
+	/* Get configuration from chip */
+	ret = stusb160x_get_caps(chip);
+	if (ret) {
+		dev_err(chip->dev, "Failed to get port caps: %d\n", ret);
+		goto main_reg_disable;
+	}
+
+	/* Get optional re-configuration from device tree */
+	ret = stusb160x_get_fw_caps(chip, fwnode);
+	if (ret) {
+		dev_err(chip->dev, "Failed to get connector caps: %d\n", ret);
+		goto main_reg_disable;
+	}
+
+	ret = stusb160x_chip_init(chip);
+	if (ret) {
+		dev_err(chip->dev, "Failed to init port: %d\n", ret);
+		goto main_reg_disable;
+	}
+
+	chip->port = typec_register_port(chip->dev, &chip->capability);
+	if (IS_ERR(chip->port)) {
+		ret = PTR_ERR(chip->port);
+		goto all_reg_disable;
+	}
+
+	/*
+	 * Default power operation mode initialization: will be updated upon
+	 * attach/detach interrupt
+	 */
+	typec_set_pwr_opmode(chip->port, chip->pwr_opmode);
+
+	if (client->irq) {
+		chip->role_sw = fwnode_usb_role_switch_get(fwnode);
+		if (IS_ERR(chip->role_sw)) {
+			ret = dev_err_probe(chip->dev, PTR_ERR(chip->role_sw),
+					    "Failed to get usb role switch\n");
+			goto port_unregister;
+		}
+
+		ret = stusb160x_irq_init(chip, client->irq);
+		if (ret)
+			goto role_sw_put;
+	} else {
+		/*
+		 * If Source or Dual power role, need to enable VDD supply
+		 * providing Vbus if present. In case of interrupt support,
+		 * VDD supply will be dynamically managed upon attach/detach
+		 * interrupt.
+		 */
+		if (chip->port_type != TYPEC_PORT_SNK && chip->vdd_supply) {
+			ret = regulator_enable(chip->vdd_supply);
+			if (ret) {
+				dev_err(chip->dev,
+					"Failed to enable VDD supply: %d\n",
+					ret);
+				goto port_unregister;
+			}
+			chip->vbus_on = true;
+		}
+	}
+
+	fwnode_handle_put(fwnode);
+
+	return 0;
+
+role_sw_put:
+	if (chip->role_sw)
+		usb_role_switch_put(chip->role_sw);
+port_unregister:
+	typec_unregister_port(chip->port);
+all_reg_disable:
+	if (stusb160x_get_vconn(chip))
+		stusb160x_set_vconn(chip, false);
+main_reg_disable:
+	if (chip->main_supply)
+		regulator_disable(chip->main_supply);
+fwnode_put:
+	fwnode_handle_put(fwnode);
+
+	return ret;
+}
+
+static void stusb160x_remove(struct i2c_client *client)
+{
+	struct stusb160x *chip = i2c_get_clientdata(client);
+
+	if (chip->partner) {
+		typec_unregister_partner(chip->partner);
+		chip->partner = NULL;
+	}
+
+	if (chip->vbus_on)
+		regulator_disable(chip->vdd_supply);
+
+	if (chip->role_sw)
+		usb_role_switch_put(chip->role_sw);
+
+	typec_unregister_port(chip->port);
+
+	if (stusb160x_get_vconn(chip))
+		stusb160x_set_vconn(chip, false);
+
+	if (chip->main_supply)
+		regulator_disable(chip->main_supply);
+}
+
+static int __maybe_unused stusb160x_suspend(struct device *dev)
+{
+	struct stusb160x *chip = dev_get_drvdata(dev);
+
+	/* Mask interrupts */
+	return regmap_update_bits(chip->regmap,
+				  STUSB160X_ALERT_STATUS_MASK_CTRL,
+				  STUSB160X_ALL_ALERTS, STUSB160X_ALL_ALERTS);
+}
+
+static int __maybe_unused stusb160x_resume(struct device *dev)
+{
+	struct stusb160x *chip = dev_get_drvdata(dev);
+	u32 status;
+	int ret;
+
+	ret = regcache_sync(chip->regmap);
+	if (ret)
+		return ret;
+
+	/* Check if attach/detach occurred during low power */
+	ret = regmap_read(chip->regmap,
+			  STUSB160X_CC_CONNECTION_STATUS, &status);
+	if (ret)
+		return ret;
+
+	if (chip->partner && !(status & STUSB160X_CC_ATTACH))
+		stusb160x_detach(chip, status);
+
+	if (!chip->partner && (status & STUSB160X_CC_ATTACH)) {
+		ret = stusb160x_attach(chip, status);
+		if (ret)
+			dev_err(chip->dev, "attach failed: %d\n", ret);
+	}
+
+	/* Unmask interrupts */
+	return regmap_write_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL,
+				 STUSB160X_CC_CONNECTION, 0);
+}
+
+static SIMPLE_DEV_PM_OPS(stusb160x_pm_ops, stusb160x_suspend, stusb160x_resume);
+
+static struct i2c_driver stusb160x_driver = {
+	.driver = {
+		.name = "stusb160x",
+		.pm = &stusb160x_pm_ops,
+		.of_match_table = stusb160x_of_match,
+	},
+	.probe_new = stusb160x_probe,
+	.remove = stusb160x_remove,
+};
+module_i2c_driver(stusb160x_driver);
+
+MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STUSB160x Type-C controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
new file mode 100644
index 000000000..e6b88ca4a
--- /dev/null
+++ b/drivers/usb/typec/tcpm/Kconfig
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config TYPEC_TCPM
+	tristate "USB Type-C Port Controller Manager"
+	depends on USB
+	select USB_ROLE_SWITCH
+	select POWER_SUPPLY
+	help
+	  The Type-C Port Controller Manager provides a USB PD and USB Type-C
+	  state machine for use with Type-C Port Controllers.
+
+if TYPEC_TCPM
+
+config TYPEC_TCPCI
+	tristate "Type-C Port Controller Interface driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Type-C Port Controller driver for TCPCI-compliant controller.
+
+if TYPEC_TCPCI
+
+config TYPEC_RT1711H
+	tristate "Richtek RT1711H Type-C chip driver"
+	help
+	  Richtek RT1711H Type-C chip driver that works with
+	  Type-C Port Controller Manager to provide USB PD and USB
+	  Type-C functionalities.
+
+config TYPEC_MT6360
+	tristate "Mediatek MT6360 Type-C driver"
+	depends on MFD_MT6360
+	help
+	  Mediatek MT6360 is a multi-functional IC that includes
+	  USB Type-C. It works with Type-C Port Controller Manager
+	  to provide USB PD and USB Type-C functionalities.
+
+config TYPEC_TCPCI_MT6370
+	tristate "MediaTek MT6370 Type-C driver"
+	depends on MFD_MT6370
+	help
+	  MediaTek MT6370 is a multi-functional IC that includes
+	  USB Type-C. It works with Type-C Port Controller Manager
+	  to provide USB PD and USB Type-C functionalities.
+
+	  This driver can also be built as a module. The module
+	  will be called "tcpci_mt6370".
+
+config TYPEC_TCPCI_MAXIM
+	tristate "Maxim TCPCI based Type-C chip driver"
+	help
+	  MAXIM TCPCI based Type-C/PD chip driver. Works with
+	  with Type-C Port Controller Manager.
+
+endif # TYPEC_TCPCI
+
+config TYPEC_FUSB302
+	tristate "Fairchild FUSB302 Type-C chip driver"
+	depends on I2C
+	depends on EXTCON || !EXTCON
+	help
+	  The Fairchild FUSB302 Type-C chip driver that works with
+	  Type-C Port Controller Manager to provide USB PD and USB
+	  Type-C functionalities.
+
+config TYPEC_WCOVE
+	tristate "Intel WhiskeyCove PMIC USB Type-C PHY driver"
+	depends on ACPI
+	depends on MFD_INTEL_PMC_BXT
+	depends on BXT_WC_PMIC_OPREGION
+	help
+	  This driver adds support for USB Type-C on Intel Broxton platforms
+	  that have Intel Whiskey Cove PMIC. The driver works with USB Type-C
+	  Port Controller Manager to provide USB PD and Type-C functionalities.
+
+	  To compile this driver as module, choose M here: the module will be
+	  called typec_wcove.ko
+
+endif # TYPEC_TCPM
diff --git a/drivers/usb/typec/tcpm/Makefile b/drivers/usb/typec/tcpm/Makefile
new file mode 100644
index 000000000..906d9dced
--- /dev/null
+++ b/drivers/usb/typec/tcpm/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_TYPEC_TCPM)		+= tcpm.o
+obj-$(CONFIG_TYPEC_FUSB302)		+= fusb302.o
+obj-$(CONFIG_TYPEC_WCOVE)		+= typec_wcove.o
+typec_wcove-y				:= wcove.o
+obj-$(CONFIG_TYPEC_TCPCI)		+= tcpci.o
+obj-$(CONFIG_TYPEC_RT1711H)		+= tcpci_rt1711h.o
+obj-$(CONFIG_TYPEC_MT6360)		+= tcpci_mt6360.o
+obj-$(CONFIG_TYPEC_TCPCI_MT6370)	+= tcpci_mt6370.o
+obj-$(CONFIG_TYPEC_TCPCI_MAXIM)		+= tcpci_maxim.o
diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
new file mode 100644
index 000000000..721b2a548
--- /dev/null
+++ b/drivers/usb/typec/tcpm/fusb302.c
@@ -0,0 +1,1848 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016-2017 Google, Inc
+ *
+ * Fairchild FUSB302 Type-C Chip Driver
+ */
+
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/extcon.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/proc_fs.h>
+#include <linux/regulator/consumer.h>
+#include <linux/sched/clock.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/usb.h>
+#include <linux/usb/typec.h>
+#include <linux/usb/tcpm.h>
+#include <linux/usb/pd.h>
+#include <linux/workqueue.h>
+
+#include "fusb302_reg.h"
+
+/*
+ * When the device is SNK, BC_LVL interrupt is used to monitor cc pins
+ * for the current capability offered by the SRC. As FUSB302 chip fires
+ * the BC_LVL interrupt on PD signalings, cc lvl should be handled after
+ * a delay to avoid measuring on PD activities. The delay is slightly
+ * longer than PD_T_PD_DEBPUNCE (10-20ms).
+ */
+#define T_BC_LVL_DEBOUNCE_DELAY_MS 30
+
+enum toggling_mode {
+	TOGGLING_MODE_OFF,
+	TOGGLING_MODE_DRP,
+	TOGGLING_MODE_SNK,
+	TOGGLING_MODE_SRC,
+};
+
+enum src_current_status {
+	SRC_CURRENT_DEFAULT,
+	SRC_CURRENT_MEDIUM,
+	SRC_CURRENT_HIGH,
+};
+
+static const u8 ra_mda_value[] = {
+	[SRC_CURRENT_DEFAULT] = 4,	/* 210mV */
+	[SRC_CURRENT_MEDIUM] = 9,	/* 420mV */
+	[SRC_CURRENT_HIGH] = 18,	/* 798mV */
+};
+
+static const u8 rd_mda_value[] = {
+	[SRC_CURRENT_DEFAULT] = 38,	/* 1638mV */
+	[SRC_CURRENT_MEDIUM] = 38,	/* 1638mV */
+	[SRC_CURRENT_HIGH] = 61,	/* 2604mV */
+};
+
+#define LOG_BUFFER_ENTRIES	1024
+#define LOG_BUFFER_ENTRY_SIZE	128
+
+struct fusb302_chip {
+	struct device *dev;
+	struct i2c_client *i2c_client;
+	struct tcpm_port *tcpm_port;
+	struct tcpc_dev tcpc_dev;
+
+	struct regulator *vbus;
+
+	spinlock_t irq_lock;
+	struct work_struct irq_work;
+	bool irq_suspended;
+	bool irq_while_suspended;
+	struct gpio_desc *gpio_int_n;
+	int gpio_int_n_irq;
+	struct extcon_dev *extcon;
+
+	struct workqueue_struct *wq;
+	struct delayed_work bc_lvl_handler;
+
+	/* lock for sharing chip states */
+	struct mutex lock;
+
+	/* chip status */
+	enum toggling_mode toggling_mode;
+	enum src_current_status src_current_status;
+	bool intr_togdone;
+	bool intr_bc_lvl;
+	bool intr_comp_chng;
+
+	/* port status */
+	bool vconn_on;
+	bool vbus_on;
+	bool charge_on;
+	bool vbus_present;
+	enum typec_cc_polarity cc_polarity;
+	enum typec_cc_status cc1;
+	enum typec_cc_status cc2;
+	u32 snk_pdo[PDO_MAX_OBJECTS];
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *dentry;
+	/* lock for log buffer access */
+	struct mutex logbuffer_lock;
+	int logbuffer_head;
+	int logbuffer_tail;
+	u8 *logbuffer[LOG_BUFFER_ENTRIES];
+#endif
+};
+
+/*
+ * Logging
+ */
+
+#ifdef CONFIG_DEBUG_FS
+static bool fusb302_log_full(struct fusb302_chip *chip)
+{
+	return chip->logbuffer_tail ==
+		(chip->logbuffer_head + 1) % LOG_BUFFER_ENTRIES;
+}
+
+__printf(2, 0)
+static void _fusb302_log(struct fusb302_chip *chip, const char *fmt,
+			 va_list args)
+{
+	char tmpbuffer[LOG_BUFFER_ENTRY_SIZE];
+	u64 ts_nsec = local_clock();
+	unsigned long rem_nsec;
+
+	if (!chip->logbuffer[chip->logbuffer_head]) {
+		chip->logbuffer[chip->logbuffer_head] =
+				kzalloc(LOG_BUFFER_ENTRY_SIZE, GFP_KERNEL);
+		if (!chip->logbuffer[chip->logbuffer_head])
+			return;
+	}
+
+	vsnprintf(tmpbuffer, sizeof(tmpbuffer), fmt, args);
+
+	mutex_lock(&chip->logbuffer_lock);
+
+	if (fusb302_log_full(chip)) {
+		chip->logbuffer_head = max(chip->logbuffer_head - 1, 0);
+		strscpy(tmpbuffer, "overflow", sizeof(tmpbuffer));
+	}
+
+	if (chip->logbuffer_head < 0 ||
+	    chip->logbuffer_head >= LOG_BUFFER_ENTRIES) {
+		dev_warn(chip->dev,
+			 "Bad log buffer index %d\n", chip->logbuffer_head);
+		goto abort;
+	}
+
+	if (!chip->logbuffer[chip->logbuffer_head]) {
+		dev_warn(chip->dev,
+			 "Log buffer index %d is NULL\n", chip->logbuffer_head);
+		goto abort;
+	}
+
+	rem_nsec = do_div(ts_nsec, 1000000000);
+	scnprintf(chip->logbuffer[chip->logbuffer_head],
+		  LOG_BUFFER_ENTRY_SIZE, "[%5lu.%06lu] %s",
+		  (unsigned long)ts_nsec, rem_nsec / 1000,
+		  tmpbuffer);
+	chip->logbuffer_head = (chip->logbuffer_head + 1) % LOG_BUFFER_ENTRIES;
+
+abort:
+	mutex_unlock(&chip->logbuffer_lock);
+}
+
+__printf(2, 3)
+static void fusb302_log(struct fusb302_chip *chip, const char *fmt, ...)
+{
+	va_list args;
+
+	va_start(args, fmt);
+	_fusb302_log(chip, fmt, args);
+	va_end(args);
+}
+
+static int fusb302_debug_show(struct seq_file *s, void *v)
+{
+	struct fusb302_chip *chip = (struct fusb302_chip *)s->private;
+	int tail;
+
+	mutex_lock(&chip->logbuffer_lock);
+	tail = chip->logbuffer_tail;
+	while (tail != chip->logbuffer_head) {
+		seq_printf(s, "%s\n", chip->logbuffer[tail]);
+		tail = (tail + 1) % LOG_BUFFER_ENTRIES;
+	}
+	if (!seq_has_overflowed(s))
+		chip->logbuffer_tail = tail;
+	mutex_unlock(&chip->logbuffer_lock);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(fusb302_debug);
+
+static void fusb302_debugfs_init(struct fusb302_chip *chip)
+{
+	char name[NAME_MAX];
+
+	mutex_init(&chip->logbuffer_lock);
+	snprintf(name, NAME_MAX, "fusb302-%s", dev_name(chip->dev));
+	chip->dentry = debugfs_create_dir(name, usb_debug_root);
+	debugfs_create_file("log", S_IFREG | 0444, chip->dentry, chip,
+			    &fusb302_debug_fops);
+}
+
+static void fusb302_debugfs_exit(struct fusb302_chip *chip)
+{
+	debugfs_remove(chip->dentry);
+}
+
+#else
+
+static void fusb302_log(const struct fusb302_chip *chip,
+			const char *fmt, ...) { }
+static void fusb302_debugfs_init(const struct fusb302_chip *chip) { }
+static void fusb302_debugfs_exit(const struct fusb302_chip *chip) { }
+
+#endif
+
+static int fusb302_i2c_write(struct fusb302_chip *chip,
+			     u8 address, u8 data)
+{
+	int ret = 0;
+
+	ret = i2c_smbus_write_byte_data(chip->i2c_client, address, data);
+	if (ret < 0)
+		fusb302_log(chip, "cannot write 0x%02x to 0x%02x, ret=%d",
+			    data, address, ret);
+
+	return ret;
+}
+
+static int fusb302_i2c_block_write(struct fusb302_chip *chip, u8 address,
+				   u8 length, const u8 *data)
+{
+	int ret = 0;
+
+	if (length <= 0)
+		return ret;
+
+	ret = i2c_smbus_write_i2c_block_data(chip->i2c_client, address,
+					     length, data);
+	if (ret < 0)
+		fusb302_log(chip, "cannot block write 0x%02x, len=%d, ret=%d",
+			    address, length, ret);
+
+	return ret;
+}
+
+static int fusb302_i2c_read(struct fusb302_chip *chip,
+			    u8 address, u8 *data)
+{
+	int ret = 0;
+
+	ret = i2c_smbus_read_byte_data(chip->i2c_client, address);
+	*data = (u8)ret;
+	if (ret < 0)
+		fusb302_log(chip, "cannot read %02x, ret=%d", address, ret);
+
+	return ret;
+}
+
+static int fusb302_i2c_block_read(struct fusb302_chip *chip, u8 address,
+				  u8 length, u8 *data)
+{
+	int ret = 0;
+
+	if (length <= 0)
+		return ret;
+
+	ret = i2c_smbus_read_i2c_block_data(chip->i2c_client, address,
+					    length, data);
+	if (ret < 0) {
+		fusb302_log(chip, "cannot block read 0x%02x, len=%d, ret=%d",
+			    address, length, ret);
+		goto done;
+	}
+	if (ret != length) {
+		fusb302_log(chip, "only read %d/%d bytes from 0x%02x",
+			    ret, length, address);
+		ret = -EIO;
+	}
+
+done:
+	return ret;
+}
+
+static int fusb302_i2c_mask_write(struct fusb302_chip *chip, u8 address,
+				  u8 mask, u8 value)
+{
+	int ret = 0;
+	u8 data;
+
+	ret = fusb302_i2c_read(chip, address, &data);
+	if (ret < 0)
+		return ret;
+	data &= ~mask;
+	data |= value;
+	ret = fusb302_i2c_write(chip, address, data);
+	if (ret < 0)
+		return ret;
+
+	return ret;
+}
+
+static int fusb302_i2c_set_bits(struct fusb302_chip *chip, u8 address,
+				u8 set_bits)
+{
+	return fusb302_i2c_mask_write(chip, address, 0x00, set_bits);
+}
+
+static int fusb302_i2c_clear_bits(struct fusb302_chip *chip, u8 address,
+				  u8 clear_bits)
+{
+	return fusb302_i2c_mask_write(chip, address, clear_bits, 0x00);
+}
+
+static int fusb302_sw_reset(struct fusb302_chip *chip)
+{
+	int ret = 0;
+
+	ret = fusb302_i2c_write(chip, FUSB_REG_RESET,
+				FUSB_REG_RESET_SW_RESET);
+	if (ret < 0)
+		fusb302_log(chip, "cannot sw reset the chip, ret=%d", ret);
+	else
+		fusb302_log(chip, "sw reset");
+
+	return ret;
+}
+
+static int fusb302_enable_tx_auto_retries(struct fusb302_chip *chip, u8 retry_count)
+{
+	int ret = 0;
+
+	ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3, retry_count |
+				   FUSB_REG_CONTROL3_AUTO_RETRY);
+
+	return ret;
+}
+
+/*
+ * initialize interrupt on the chip
+ * - unmasked interrupt: VBUS_OK
+ */
+static int fusb302_init_interrupt(struct fusb302_chip *chip)
+{
+	int ret = 0;
+
+	ret = fusb302_i2c_write(chip, FUSB_REG_MASK,
+				0xFF & ~FUSB_REG_MASK_VBUSOK);
+	if (ret < 0)
+		return ret;
+	ret = fusb302_i2c_write(chip, FUSB_REG_MASKA, 0xFF);
+	if (ret < 0)
+		return ret;
+	ret = fusb302_i2c_write(chip, FUSB_REG_MASKB, 0xFF);
+	if (ret < 0)
+		return ret;
+	ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL0,
+				     FUSB_REG_CONTROL0_INT_MASK);
+	if (ret < 0)
+		return ret;
+
+	return ret;
+}
+
+static int fusb302_set_power_mode(struct fusb302_chip *chip, u8 power_mode)
+{
+	int ret = 0;
+
+	ret = fusb302_i2c_write(chip, FUSB_REG_POWER, power_mode);
+
+	return ret;
+}
+
+static int tcpm_init(struct tcpc_dev *dev)
+{
+	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
+						 tcpc_dev);
+	int ret = 0;
+	u8 data;
+
+	ret = fusb302_sw_reset(chip);
+	if (ret < 0)
+		return ret;
+	ret = fusb302_enable_tx_auto_retries(chip, FUSB_REG_CONTROL3_N_RETRIES_3);
+	if (ret < 0)
+		return ret;
+	ret = fusb302_init_interrupt(chip);
+	if (ret < 0)
+		return ret;
+	ret = fusb302_set_power_mode(chip, FUSB_REG_POWER_PWR_ALL);
+	if (ret < 0)
+		return ret;
+	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &data);
+	if (ret < 0)
+		return ret;
+	chip->vbus_present = !!(data & FUSB_REG_STATUS0_VBUSOK);
+	ret = fusb302_i2c_read(chip, FUSB_REG_DEVICE_ID, &data);
+	if (ret < 0)
+		return ret;
+	fusb302_log(chip, "fusb302 device ID: 0x%02x", data);
+
+	return ret;
+}
+
+static int tcpm_get_vbus(struct tcpc_dev *dev)
+{
+	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
+						 tcpc_dev);
+	int ret = 0;
+
+	mutex_lock(&chip->lock);
+	ret = chip->vbus_present ? 1 : 0;
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static int tcpm_get_current_limit(struct tcpc_dev *dev)
+{
+	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
+						 tcpc_dev);
+	int current_limit = 0;
+	unsigned long timeout;
+
+	if (!chip->extcon)
+		return 0;
+
+	/*
+	 * USB2 Charger detection may still be in progress when we get here,
+	 * this can take upto 600ms, wait 800ms max.
+	 */
+	timeout = jiffies + msecs_to_jiffies(800);
+	do {
+		if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_SDP) == 1)
+			current_limit = 500;
+
+		if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_CDP) == 1 ||
+		    extcon_get_state(chip->extcon, EXTCON_CHG_USB_ACA) == 1)
+			current_limit = 1500;
+
+		if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_DCP) == 1)
+			current_limit = 2000;
+
+		msleep(50);
+	} while (current_limit == 0 && time_before(jiffies, timeout));
+
+	return current_limit;
+}
+
+static int fusb302_set_src_current(struct fusb302_chip *chip,
+				   enum src_current_status status)
+{
+	int ret = 0;
+
+	chip->src_current_status = status;
+	switch (status) {
+	case SRC_CURRENT_DEFAULT:
+		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0,
+					     FUSB_REG_CONTROL0_HOST_CUR_MASK,
+					     FUSB_REG_CONTROL0_HOST_CUR_DEF);
+		break;
+	case SRC_CURRENT_MEDIUM:
+		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0,
+					     FUSB_REG_CONTROL0_HOST_CUR_MASK,
+					     FUSB_REG_CONTROL0_HOST_CUR_MED);
+		break;
+	case SRC_CURRENT_HIGH:
+		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0,
+					     FUSB_REG_CONTROL0_HOST_CUR_MASK,
+					     FUSB_REG_CONTROL0_HOST_CUR_HIGH);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static int fusb302_set_toggling(struct fusb302_chip *chip,
+				enum toggling_mode mode)
+{
+	int ret = 0;
+
+	/* first disable toggling */
+	ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL2,
+				     FUSB_REG_CONTROL2_TOGGLE);
+	if (ret < 0)
+		return ret;
+	/* mask interrupts for SRC or SNK */
+	ret = fusb302_i2c_set_bits(chip, FUSB_REG_MASK,
+				   FUSB_REG_MASK_BC_LVL |
+				   FUSB_REG_MASK_COMP_CHNG);
+	if (ret < 0)
+		return ret;
+	chip->intr_bc_lvl = false;
+	chip->intr_comp_chng = false;
+	/* configure toggling mode: none/snk/src/drp */
+	switch (mode) {
+	case TOGGLING_MODE_OFF:
+		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
+					     FUSB_REG_CONTROL2_MODE_MASK,
+					     FUSB_REG_CONTROL2_MODE_NONE);
+		if (ret < 0)
+			return ret;
+		break;
+	case TOGGLING_MODE_SNK:
+		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
+					     FUSB_REG_CONTROL2_MODE_MASK,
+					     FUSB_REG_CONTROL2_MODE_UFP);
+		if (ret < 0)
+			return ret;
+		break;
+	case TOGGLING_MODE_SRC:
+		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
+					     FUSB_REG_CONTROL2_MODE_MASK,
+					     FUSB_REG_CONTROL2_MODE_DFP);
+		if (ret < 0)
+			return ret;
+		break;
+	case TOGGLING_MODE_DRP:
+		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
+					     FUSB_REG_CONTROL2_MODE_MASK,
+					     FUSB_REG_CONTROL2_MODE_DRP);
+		if (ret < 0)
+			return ret;
+		break;
+	default:
+		break;
+	}
+
+	if (mode == TOGGLING_MODE_OFF) {
+		/* mask TOGDONE interrupt */
+		ret = fusb302_i2c_set_bits(chip, FUSB_REG_MASKA,
+					   FUSB_REG_MASKA_TOGDONE);
+		if (ret < 0)
+			return ret;
+		chip->intr_togdone = false;
+	} else {
+		/* Datasheet says vconn MUST be off when toggling */
+		WARN(chip->vconn_on, "Vconn is on during toggle start");
+		/* unmask TOGDONE interrupt */
+		ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA,
+					     FUSB_REG_MASKA_TOGDONE);
+		if (ret < 0)
+			return ret;
+		chip->intr_togdone = true;
+		/* start toggling */
+		ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL2,
+					   FUSB_REG_CONTROL2_TOGGLE);
+		if (ret < 0)
+			return ret;
+		/* during toggling, consider cc as Open */
+		chip->cc1 = TYPEC_CC_OPEN;
+		chip->cc2 = TYPEC_CC_OPEN;
+	}
+	chip->toggling_mode = mode;
+
+	return ret;
+}
+
+static const char * const typec_cc_status_name[] = {
+	[TYPEC_CC_OPEN]		= "Open",
+	[TYPEC_CC_RA]		= "Ra",
+	[TYPEC_CC_RD]		= "Rd",
+	[TYPEC_CC_RP_DEF]	= "Rp-def",
+	[TYPEC_CC_RP_1_5]	= "Rp-1.5",
+	[TYPEC_CC_RP_3_0]	= "Rp-3.0",
+};
+
+static const enum src_current_status cc_src_current[] = {
+	[TYPEC_CC_OPEN]		= SRC_CURRENT_DEFAULT,
+	[TYPEC_CC_RA]		= SRC_CURRENT_DEFAULT,
+	[TYPEC_CC_RD]		= SRC_CURRENT_DEFAULT,
+	[TYPEC_CC_RP_DEF]	= SRC_CURRENT_DEFAULT,
+	[TYPEC_CC_RP_1_5]	= SRC_CURRENT_MEDIUM,
+	[TYPEC_CC_RP_3_0]	= SRC_CURRENT_HIGH,
+};
+
+static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
+{
+	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
+						 tcpc_dev);
+	u8 switches0_mask = FUSB_REG_SWITCHES0_CC1_PU_EN |
+			    FUSB_REG_SWITCHES0_CC2_PU_EN |
+			    FUSB_REG_SWITCHES0_CC1_PD_EN |
+			    FUSB_REG_SWITCHES0_CC2_PD_EN;
+	u8 rd_mda, switches0_data = 0x00;
+	int ret = 0;
+
+	mutex_lock(&chip->lock);
+	switch (cc) {
+	case TYPEC_CC_OPEN:
+		break;
+	case TYPEC_CC_RD:
+		switches0_data |= FUSB_REG_SWITCHES0_CC1_PD_EN |
+				  FUSB_REG_SWITCHES0_CC2_PD_EN;
+		break;
+	case TYPEC_CC_RP_DEF:
+	case TYPEC_CC_RP_1_5:
+	case TYPEC_CC_RP_3_0:
+		switches0_data |= (chip->cc_polarity == TYPEC_POLARITY_CC1) ?
+				  FUSB_REG_SWITCHES0_CC1_PU_EN :
+				  FUSB_REG_SWITCHES0_CC2_PU_EN;
+		break;
+	default:
+		fusb302_log(chip, "unsupported cc value %s",
+			    typec_cc_status_name[cc]);
+		ret = -EINVAL;
+		goto done;
+	}
+
+	fusb302_log(chip, "cc := %s", typec_cc_status_name[cc]);
+
+	ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF);
+	if (ret < 0) {
+		fusb302_log(chip, "cannot set toggling mode, ret=%d", ret);
+		goto done;
+	}
+
+	ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0,
+				     switches0_mask, switches0_data);
+	if (ret < 0) {
+		fusb302_log(chip, "cannot set pull-up/-down, ret = %d", ret);
+		goto done;
+	}
+	/* reset the cc status */
+	chip->cc1 = TYPEC_CC_OPEN;
+	chip->cc2 = TYPEC_CC_OPEN;
+
+	/* adjust current for SRC */
+	ret = fusb302_set_src_current(chip, cc_src_current[cc]);
+	if (ret < 0) {
+		fusb302_log(chip, "cannot set src current %s, ret=%d",
+			    typec_cc_status_name[cc], ret);
+		goto done;
+	}
+
+	/* enable/disable interrupts, BC_LVL for SNK and COMP_CHNG for SRC */
+	switch (cc) {
+	case TYPEC_CC_RP_DEF:
+	case TYPEC_CC_RP_1_5:
+	case TYPEC_CC_RP_3_0:
+		rd_mda = rd_mda_value[cc_src_current[cc]];
+		ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda);
+		if (ret < 0) {
+			fusb302_log(chip,
+				    "cannot set SRC measure value, ret=%d",
+				    ret);
+			goto done;
+		}
+		ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
+					     FUSB_REG_MASK_BC_LVL |
+					     FUSB_REG_MASK_COMP_CHNG,
+					     FUSB_REG_MASK_BC_LVL);
+		if (ret < 0) {
+			fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
+				    ret);
+			goto done;
+		}
+		chip->intr_comp_chng = true;
+		chip->intr_bc_lvl = false;
+		break;
+	case TYPEC_CC_RD:
+		ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
+					     FUSB_REG_MASK_BC_LVL |
+					     FUSB_REG_MASK_COMP_CHNG,
+					     FUSB_REG_MASK_COMP_CHNG);
+		if (ret < 0) {
+			fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
+				    ret);
+			goto done;
+		}
+		chip->intr_bc_lvl = true;
+		chip->intr_comp_chng = false;
+		break;
+	default:
+		break;
+	}
+done:
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static int tcpm_get_cc(struct tcpc_dev *dev, enum typec_cc_status *cc1,
+		       enum typec_cc_status *cc2)
+{
+	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
+						 tcpc_dev);
+
+	mutex_lock(&chip->lock);
+	*cc1 = chip->cc1;
+	*cc2 = chip->cc2;
+	fusb302_log(chip, "cc1=%s, cc2=%s", typec_cc_status_name[*cc1],
+		    typec_cc_status_name[*cc2]);
+	mutex_unlock(&chip->lock);
+
+	return 0;
+}
+
+static int tcpm_set_polarity(struct tcpc_dev *dev,
+			     enum typec_cc_polarity polarity)
+{
+	return 0;
+}
+
+static int tcpm_set_vconn(struct tcpc_dev *dev, bool on)
+{
+	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
+						 tcpc_dev);
+	int ret = 0;
+	u8 switches0_data = 0x00;
+	u8 switches0_mask = FUSB_REG_SWITCHES0_VCONN_CC1 |
+			    FUSB_REG_SWITCHES0_VCONN_CC2;
+
+	mutex_lock(&chip->lock);
+	if (chip->vconn_on == on) {
+		fusb302_log(chip, "vconn is already %s", on ? "On" : "Off");
+		goto done;
+	}
+	if (on) {
+		switches0_data = (chip->cc_polarity == TYPEC_POLARITY_CC1) ?
+				 FUSB_REG_SWITCHES0_VCONN_CC2 :
+				 FUSB_REG_SWITCHES0_VCONN_CC1;
+	}
+	ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0,
+				     switches0_mask, switches0_data);
+	if (ret < 0)
+		goto done;
+	chip->vconn_on = on;
+	fusb302_log(chip, "vconn := %s", on ? "On" : "Off");
+done:
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static int tcpm_set_vbus(struct tcpc_dev *dev, bool on, bool charge)
+{
+	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
+						 tcpc_dev);
+	int ret = 0;
+
+	mutex_lock(&chip->lock);
+	if (chip->vbus_on == on) {
+		fusb302_log(chip, "vbus is already %s", on ? "On" : "Off");
+	} else {
+		if (on)
+			ret = regulator_enable(chip->vbus);
+		else
+			ret = regulator_disable(chip->vbus);
+		if (ret < 0) {
+			fusb302_log(chip, "cannot %s vbus regulator, ret=%d",
+				    on ? "enable" : "disable", ret);
+			goto done;
+		}
+		chip->vbus_on = on;
+		fusb302_log(chip, "vbus := %s", on ? "On" : "Off");
+	}
+	if (chip->charge_on == charge)
+		fusb302_log(chip, "charge is already %s",
+			    charge ? "On" : "Off");
+	else
+		chip->charge_on = charge;
+
+done:
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static int fusb302_pd_tx_flush(struct fusb302_chip *chip)
+{
+	return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL0,
+				    FUSB_REG_CONTROL0_TX_FLUSH);
+}
+
+static int fusb302_pd_rx_flush(struct fusb302_chip *chip)
+{
+	return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL1,
+				    FUSB_REG_CONTROL1_RX_FLUSH);
+}
+
+static int fusb302_pd_set_auto_goodcrc(struct fusb302_chip *chip, bool on)
+{
+	if (on)
+		return fusb302_i2c_set_bits(chip, FUSB_REG_SWITCHES1,
+					    FUSB_REG_SWITCHES1_AUTO_GCRC);
+	return fusb302_i2c_clear_bits(chip, FUSB_REG_SWITCHES1,
+					    FUSB_REG_SWITCHES1_AUTO_GCRC);
+}
+
+static int fusb302_pd_set_interrupts(struct fusb302_chip *chip, bool on)
+{
+	int ret = 0;
+	u8 mask_interrupts = FUSB_REG_MASK_COLLISION;
+	u8 maska_interrupts = FUSB_REG_MASKA_RETRYFAIL |
+			      FUSB_REG_MASKA_HARDSENT |
+			      FUSB_REG_MASKA_TX_SUCCESS |
+			      FUSB_REG_MASKA_HARDRESET;
+	u8 maskb_interrupts = FUSB_REG_MASKB_GCRCSENT;
+
+	ret = on ?
+		fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, mask_interrupts) :
+		fusb302_i2c_set_bits(chip, FUSB_REG_MASK, mask_interrupts);
+	if (ret < 0)
+		return ret;
+	ret = on ?
+		fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA, maska_interrupts) :
+		fusb302_i2c_set_bits(chip, FUSB_REG_MASKA, maska_interrupts);
+	if (ret < 0)
+		return ret;
+	ret = on ?
+		fusb302_i2c_clear_bits(chip, FUSB_REG_MASKB, maskb_interrupts) :
+		fusb302_i2c_set_bits(chip, FUSB_REG_MASKB, maskb_interrupts);
+	return ret;
+}
+
+static int tcpm_set_pd_rx(struct tcpc_dev *dev, bool on)
+{
+	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
+						 tcpc_dev);
+	int ret = 0;
+
+	mutex_lock(&chip->lock);
+	ret = fusb302_pd_rx_flush(chip);
+	if (ret < 0) {
+		fusb302_log(chip, "cannot flush pd rx buffer, ret=%d", ret);
+		goto done;
+	}
+	ret = fusb302_pd_tx_flush(chip);
+	if (ret < 0) {
+		fusb302_log(chip, "cannot flush pd tx buffer, ret=%d", ret);
+		goto done;
+	}
+	ret = fusb302_pd_set_auto_goodcrc(chip, on);
+	if (ret < 0) {
+		fusb302_log(chip, "cannot turn %s auto GCRC, ret=%d",
+			    on ? "on" : "off", ret);
+		goto done;
+	}
+	ret = fusb302_pd_set_interrupts(chip, on);
+	if (ret < 0) {
+		fusb302_log(chip, "cannot turn %s pd interrupts, ret=%d",
+			    on ? "on" : "off", ret);
+		goto done;
+	}
+	fusb302_log(chip, "pd := %s", on ? "on" : "off");
+done:
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static const char * const typec_role_name[] = {
+	[TYPEC_SINK]		= "Sink",
+	[TYPEC_SOURCE]		= "Source",
+};
+
+static const char * const typec_data_role_name[] = {
+	[TYPEC_DEVICE]		= "Device",
+	[TYPEC_HOST]		= "Host",
+};
+
+static int tcpm_set_roles(struct tcpc_dev *dev, bool attached,
+			  enum typec_role pwr, enum typec_data_role data)
+{
+	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
+						 tcpc_dev);
+	int ret = 0;
+	u8 switches1_mask = FUSB_REG_SWITCHES1_POWERROLE |
+			    FUSB_REG_SWITCHES1_DATAROLE;
+	u8 switches1_data = 0x00;
+
+	mutex_lock(&chip->lock);
+	if (pwr == TYPEC_SOURCE)
+		switches1_data |= FUSB_REG_SWITCHES1_POWERROLE;
+	if (data == TYPEC_HOST)
+		switches1_data |= FUSB_REG_SWITCHES1_DATAROLE;
+	ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES1,
+				     switches1_mask, switches1_data);
+	if (ret < 0) {
+		fusb302_log(chip, "unable to set pd header %s, %s, ret=%d",
+			    typec_role_name[pwr], typec_data_role_name[data],
+			    ret);
+		goto done;
+	}
+	fusb302_log(chip, "pd header := %s, %s", typec_role_name[pwr],
+		    typec_data_role_name[data]);
+done:
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static int tcpm_start_toggling(struct tcpc_dev *dev,
+			       enum typec_port_type port_type,
+			       enum typec_cc_status cc)
+{
+	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
+						 tcpc_dev);
+	enum toggling_mode mode = TOGGLING_MODE_OFF;
+	int ret = 0;
+
+	switch (port_type) {
+	case TYPEC_PORT_SRC:
+		mode = TOGGLING_MODE_SRC;
+		break;
+	case TYPEC_PORT_SNK:
+		mode = TOGGLING_MODE_SNK;
+		break;
+	case TYPEC_PORT_DRP:
+		mode = TOGGLING_MODE_DRP;
+		break;
+	}
+
+	mutex_lock(&chip->lock);
+	ret = fusb302_set_src_current(chip, cc_src_current[cc]);
+	if (ret < 0) {
+		fusb302_log(chip, "unable to set src current %s, ret=%d",
+			    typec_cc_status_name[cc], ret);
+		goto done;
+	}
+	ret = fusb302_set_toggling(chip, mode);
+	if (ret < 0) {
+		fusb302_log(chip,
+			    "unable to start drp toggling, ret=%d", ret);
+		goto done;
+	}
+	fusb302_log(chip, "start drp toggling");
+done:
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static int fusb302_pd_send_message(struct fusb302_chip *chip,
+				   const struct pd_message *msg)
+{
+	int ret = 0;
+	u8 buf[40];
+	u8 pos = 0;
+	int len;
+
+	/* SOP tokens */
+	buf[pos++] = FUSB302_TKN_SYNC1;
+	buf[pos++] = FUSB302_TKN_SYNC1;
+	buf[pos++] = FUSB302_TKN_SYNC1;
+	buf[pos++] = FUSB302_TKN_SYNC2;
+
+	len = pd_header_cnt_le(msg->header) * 4;
+	/* plug 2 for header */
+	len += 2;
+	if (len > 0x1F) {
+		fusb302_log(chip,
+			    "PD message too long %d (incl. header)", len);
+		return -EINVAL;
+	}
+	/* packsym tells the FUSB302 chip that the next X bytes are payload */
+	buf[pos++] = FUSB302_TKN_PACKSYM | (len & 0x1F);
+	memcpy(&buf[pos], &msg->header, sizeof(msg->header));
+	pos += sizeof(msg->header);
+
+	len -= 2;
+	memcpy(&buf[pos], msg->payload, len);
+	pos += len;
+
+	/* CRC */
+	buf[pos++] = FUSB302_TKN_JAMCRC;
+	/* EOP */
+	buf[pos++] = FUSB302_TKN_EOP;
+	/* turn tx off after sending message */
+	buf[pos++] = FUSB302_TKN_TXOFF;
+	/* start transmission */
+	buf[pos++] = FUSB302_TKN_TXON;
+
+	ret = fusb302_i2c_block_write(chip, FUSB_REG_FIFOS, pos, buf);
+	if (ret < 0)
+		return ret;
+	fusb302_log(chip, "sending PD message header: %x", msg->header);
+	fusb302_log(chip, "sending PD message len: %d", len);
+
+	return ret;
+}
+
+static int fusb302_pd_send_hardreset(struct fusb302_chip *chip)
+{
+	return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3,
+				    FUSB_REG_CONTROL3_SEND_HARDRESET);
+}
+
+static const char * const transmit_type_name[] = {
+	[TCPC_TX_SOP]			= "SOP",
+	[TCPC_TX_SOP_PRIME]		= "SOP'",
+	[TCPC_TX_SOP_PRIME_PRIME]	= "SOP''",
+	[TCPC_TX_SOP_DEBUG_PRIME]	= "DEBUG'",
+	[TCPC_TX_SOP_DEBUG_PRIME_PRIME]	= "DEBUG''",
+	[TCPC_TX_HARD_RESET]		= "HARD_RESET",
+	[TCPC_TX_CABLE_RESET]		= "CABLE_RESET",
+	[TCPC_TX_BIST_MODE_2]		= "BIST_MODE_2",
+};
+
+static int tcpm_pd_transmit(struct tcpc_dev *dev, enum tcpm_transmit_type type,
+			    const struct pd_message *msg, unsigned int negotiated_rev)
+{
+	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
+						 tcpc_dev);
+	int ret = 0;
+
+	mutex_lock(&chip->lock);
+	switch (type) {
+	case TCPC_TX_SOP:
+		/* nRetryCount 3 in P2.0 spec, whereas 2 in PD3.0 spec */
+		ret = fusb302_enable_tx_auto_retries(chip, negotiated_rev > PD_REV20 ?
+						     FUSB_REG_CONTROL3_N_RETRIES_2 :
+						     FUSB_REG_CONTROL3_N_RETRIES_3);
+		if (ret < 0)
+			fusb302_log(chip, "Cannot update retry count ret=%d", ret);
+
+		ret = fusb302_pd_send_message(chip, msg);
+		if (ret < 0)
+			fusb302_log(chip,
+				    "cannot send PD message, ret=%d", ret);
+		break;
+	case TCPC_TX_HARD_RESET:
+		ret = fusb302_pd_send_hardreset(chip);
+		if (ret < 0)
+			fusb302_log(chip,
+				    "cannot send hardreset, ret=%d", ret);
+		break;
+	default:
+		fusb302_log(chip, "type %s not supported",
+			    transmit_type_name[type]);
+		ret = -EINVAL;
+	}
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static enum typec_cc_status fusb302_bc_lvl_to_cc(u8 bc_lvl)
+{
+	if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_1230_MAX)
+		return TYPEC_CC_RP_3_0;
+	if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_600_1230)
+		return TYPEC_CC_RP_1_5;
+	if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_200_600)
+		return TYPEC_CC_RP_DEF;
+	return TYPEC_CC_OPEN;
+}
+
+static void fusb302_bc_lvl_handler_work(struct work_struct *work)
+{
+	struct fusb302_chip *chip = container_of(work, struct fusb302_chip,
+						 bc_lvl_handler.work);
+	int ret = 0;
+	u8 status0;
+	u8 bc_lvl;
+	enum typec_cc_status cc_status;
+
+	mutex_lock(&chip->lock);
+	if (!chip->intr_bc_lvl) {
+		fusb302_log(chip, "BC_LVL interrupt is turned off, abort");
+		goto done;
+	}
+	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
+	if (ret < 0)
+		goto done;
+	fusb302_log(chip, "BC_LVL handler, status0=0x%02x", status0);
+	if (status0 & FUSB_REG_STATUS0_ACTIVITY) {
+		fusb302_log(chip, "CC activities detected, delay handling");
+		mod_delayed_work(chip->wq, &chip->bc_lvl_handler,
+				 msecs_to_jiffies(T_BC_LVL_DEBOUNCE_DELAY_MS));
+		goto done;
+	}
+	bc_lvl = status0 & FUSB_REG_STATUS0_BC_LVL_MASK;
+	cc_status = fusb302_bc_lvl_to_cc(bc_lvl);
+	if (chip->cc_polarity == TYPEC_POLARITY_CC1) {
+		if (chip->cc1 != cc_status) {
+			fusb302_log(chip, "cc1: %s -> %s",
+				    typec_cc_status_name[chip->cc1],
+				    typec_cc_status_name[cc_status]);
+			chip->cc1 = cc_status;
+			tcpm_cc_change(chip->tcpm_port);
+		}
+	} else {
+		if (chip->cc2 != cc_status) {
+			fusb302_log(chip, "cc2: %s -> %s",
+				    typec_cc_status_name[chip->cc2],
+				    typec_cc_status_name[cc_status]);
+			chip->cc2 = cc_status;
+			tcpm_cc_change(chip->tcpm_port);
+		}
+	}
+
+done:
+	mutex_unlock(&chip->lock);
+}
+
+static void init_tcpc_dev(struct tcpc_dev *fusb302_tcpc_dev)
+{
+	fusb302_tcpc_dev->init = tcpm_init;
+	fusb302_tcpc_dev->get_vbus = tcpm_get_vbus;
+	fusb302_tcpc_dev->get_current_limit = tcpm_get_current_limit;
+	fusb302_tcpc_dev->set_cc = tcpm_set_cc;
+	fusb302_tcpc_dev->get_cc = tcpm_get_cc;
+	fusb302_tcpc_dev->set_polarity = tcpm_set_polarity;
+	fusb302_tcpc_dev->set_vconn = tcpm_set_vconn;
+	fusb302_tcpc_dev->set_vbus = tcpm_set_vbus;
+	fusb302_tcpc_dev->set_pd_rx = tcpm_set_pd_rx;
+	fusb302_tcpc_dev->set_roles = tcpm_set_roles;
+	fusb302_tcpc_dev->start_toggling = tcpm_start_toggling;
+	fusb302_tcpc_dev->pd_transmit = tcpm_pd_transmit;
+}
+
+static const char * const cc_polarity_name[] = {
+	[TYPEC_POLARITY_CC1]	= "Polarity_CC1",
+	[TYPEC_POLARITY_CC2]	= "Polarity_CC2",
+};
+
+static int fusb302_set_cc_polarity_and_pull(struct fusb302_chip *chip,
+					    enum typec_cc_polarity cc_polarity,
+					    bool pull_up, bool pull_down)
+{
+	int ret = 0;
+	u8 switches0_data = 0x00;
+	u8 switches1_mask = FUSB_REG_SWITCHES1_TXCC1_EN |
+			    FUSB_REG_SWITCHES1_TXCC2_EN;
+	u8 switches1_data = 0x00;
+
+	if (pull_down)
+		switches0_data |= FUSB_REG_SWITCHES0_CC1_PD_EN |
+				  FUSB_REG_SWITCHES0_CC2_PD_EN;
+
+	if (cc_polarity == TYPEC_POLARITY_CC1) {
+		switches0_data |= FUSB_REG_SWITCHES0_MEAS_CC1;
+		if (chip->vconn_on)
+			switches0_data |= FUSB_REG_SWITCHES0_VCONN_CC2;
+		if (pull_up)
+			switches0_data |= FUSB_REG_SWITCHES0_CC1_PU_EN;
+		switches1_data = FUSB_REG_SWITCHES1_TXCC1_EN;
+	} else {
+		switches0_data |= FUSB_REG_SWITCHES0_MEAS_CC2;
+		if (chip->vconn_on)
+			switches0_data |= FUSB_REG_SWITCHES0_VCONN_CC1;
+		if (pull_up)
+			switches0_data |= FUSB_REG_SWITCHES0_CC2_PU_EN;
+		switches1_data = FUSB_REG_SWITCHES1_TXCC2_EN;
+	}
+	ret = fusb302_i2c_write(chip, FUSB_REG_SWITCHES0, switches0_data);
+	if (ret < 0)
+		return ret;
+	ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES1,
+				     switches1_mask, switches1_data);
+	if (ret < 0)
+		return ret;
+	chip->cc_polarity = cc_polarity;
+
+	return ret;
+}
+
+static int fusb302_handle_togdone_snk(struct fusb302_chip *chip,
+				      u8 togdone_result)
+{
+	int ret = 0;
+	u8 status0;
+	u8 bc_lvl;
+	enum typec_cc_polarity cc_polarity;
+	enum typec_cc_status cc_status_active, cc1, cc2;
+
+	/* set polarity and pull_up, pull_down */
+	cc_polarity = (togdone_result == FUSB_REG_STATUS1A_TOGSS_SNK1) ?
+		      TYPEC_POLARITY_CC1 : TYPEC_POLARITY_CC2;
+	ret = fusb302_set_cc_polarity_and_pull(chip, cc_polarity, false, true);
+	if (ret < 0) {
+		fusb302_log(chip, "cannot set cc polarity %s, ret=%d",
+			    cc_polarity_name[cc_polarity], ret);
+		return ret;
+	}
+	/* fusb302_set_cc_polarity() has set the correct measure block */
+	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
+	if (ret < 0)
+		return ret;
+	bc_lvl = status0 & FUSB_REG_STATUS0_BC_LVL_MASK;
+	cc_status_active = fusb302_bc_lvl_to_cc(bc_lvl);
+	/* restart toggling if the cc status on the active line is OPEN */
+	if (cc_status_active == TYPEC_CC_OPEN) {
+		fusb302_log(chip, "restart toggling as CC_OPEN detected");
+		ret = fusb302_set_toggling(chip, chip->toggling_mode);
+		return ret;
+	}
+	/* update tcpm with the new cc value */
+	cc1 = (cc_polarity == TYPEC_POLARITY_CC1) ?
+	      cc_status_active : TYPEC_CC_OPEN;
+	cc2 = (cc_polarity == TYPEC_POLARITY_CC2) ?
+	      cc_status_active : TYPEC_CC_OPEN;
+	if ((chip->cc1 != cc1) || (chip->cc2 != cc2)) {
+		chip->cc1 = cc1;
+		chip->cc2 = cc2;
+		tcpm_cc_change(chip->tcpm_port);
+	}
+	/* turn off toggling */
+	ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF);
+	if (ret < 0) {
+		fusb302_log(chip,
+			    "cannot set toggling mode off, ret=%d", ret);
+		return ret;
+	}
+	/* unmask bc_lvl interrupt */
+	ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, FUSB_REG_MASK_BC_LVL);
+	if (ret < 0) {
+		fusb302_log(chip,
+			    "cannot unmask bc_lcl interrupt, ret=%d", ret);
+		return ret;
+	}
+	chip->intr_bc_lvl = true;
+	fusb302_log(chip, "detected cc1=%s, cc2=%s",
+		    typec_cc_status_name[cc1],
+		    typec_cc_status_name[cc2]);
+
+	return ret;
+}
+
+/* On error returns < 0, otherwise a typec_cc_status value */
+static int fusb302_get_src_cc_status(struct fusb302_chip *chip,
+				     enum typec_cc_polarity cc_polarity,
+				     enum typec_cc_status *cc)
+{
+	u8 ra_mda = ra_mda_value[chip->src_current_status];
+	u8 rd_mda = rd_mda_value[chip->src_current_status];
+	u8 switches0_data, status0;
+	int ret;
+
+	/* Step 1: Set switches so that we measure the right CC pin */
+	switches0_data = (cc_polarity == TYPEC_POLARITY_CC1) ?
+		FUSB_REG_SWITCHES0_CC1_PU_EN | FUSB_REG_SWITCHES0_MEAS_CC1 :
+		FUSB_REG_SWITCHES0_CC2_PU_EN | FUSB_REG_SWITCHES0_MEAS_CC2;
+	ret = fusb302_i2c_write(chip, FUSB_REG_SWITCHES0, switches0_data);
+	if (ret < 0)
+		return ret;
+
+	fusb302_i2c_read(chip, FUSB_REG_SWITCHES0, &status0);
+	fusb302_log(chip, "get_src_cc_status switches: 0x%0x", status0);
+
+	/* Step 2: Set compararator volt to differentiate between Open and Rd */
+	ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(50, 100);
+	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
+	if (ret < 0)
+		return ret;
+
+	fusb302_log(chip, "get_src_cc_status rd_mda status0: 0x%0x", status0);
+	if (status0 & FUSB_REG_STATUS0_COMP) {
+		*cc = TYPEC_CC_OPEN;
+		return 0;
+	}
+
+	/* Step 3: Set compararator input to differentiate between Rd and Ra. */
+	ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, ra_mda);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(50, 100);
+	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
+	if (ret < 0)
+		return ret;
+
+	fusb302_log(chip, "get_src_cc_status ra_mda status0: 0x%0x", status0);
+	if (status0 & FUSB_REG_STATUS0_COMP)
+		*cc = TYPEC_CC_RD;
+	else
+		*cc = TYPEC_CC_RA;
+
+	return 0;
+}
+
+static int fusb302_handle_togdone_src(struct fusb302_chip *chip,
+				      u8 togdone_result)
+{
+	/*
+	 * - set polarity (measure cc, vconn, tx)
+	 * - set pull_up, pull_down
+	 * - set cc1, cc2, and update to tcpm_port
+	 * - set I_COMP interrupt on
+	 */
+	int ret = 0;
+	u8 rd_mda = rd_mda_value[chip->src_current_status];
+	enum toggling_mode toggling_mode = chip->toggling_mode;
+	enum typec_cc_polarity cc_polarity;
+	enum typec_cc_status cc1, cc2;
+
+	/*
+	 * The toggle-engine will stop in a src state if it sees either Ra or
+	 * Rd. Determine the status for both CC pins, starting with the one
+	 * where toggling stopped, as that is where the switches point now.
+	 */
+	if (togdone_result == FUSB_REG_STATUS1A_TOGSS_SRC1)
+		ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC1, &cc1);
+	else
+		ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC2, &cc2);
+	if (ret < 0)
+		return ret;
+	/* we must turn off toggling before we can measure the other pin */
+	ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF);
+	if (ret < 0) {
+		fusb302_log(chip, "cannot set toggling mode off, ret=%d", ret);
+		return ret;
+	}
+	/* get the status of the other pin */
+	if (togdone_result == FUSB_REG_STATUS1A_TOGSS_SRC1)
+		ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC2, &cc2);
+	else
+		ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC1, &cc1);
+	if (ret < 0)
+		return ret;
+
+	/* determine polarity based on the status of both pins */
+	if (cc1 == TYPEC_CC_RD &&
+			(cc2 == TYPEC_CC_OPEN || cc2 == TYPEC_CC_RA)) {
+		cc_polarity = TYPEC_POLARITY_CC1;
+	} else if (cc2 == TYPEC_CC_RD &&
+		    (cc1 == TYPEC_CC_OPEN || cc1 == TYPEC_CC_RA)) {
+		cc_polarity = TYPEC_POLARITY_CC2;
+	} else {
+		fusb302_log(chip, "unexpected CC status cc1=%s, cc2=%s, restarting toggling",
+			    typec_cc_status_name[cc1],
+			    typec_cc_status_name[cc2]);
+		return fusb302_set_toggling(chip, toggling_mode);
+	}
+	/* set polarity and pull_up, pull_down */
+	ret = fusb302_set_cc_polarity_and_pull(chip, cc_polarity, true, false);
+	if (ret < 0) {
+		fusb302_log(chip, "cannot set cc polarity %s, ret=%d",
+			    cc_polarity_name[cc_polarity], ret);
+		return ret;
+	}
+	/* update tcpm with the new cc value */
+	if ((chip->cc1 != cc1) || (chip->cc2 != cc2)) {
+		chip->cc1 = cc1;
+		chip->cc2 = cc2;
+		tcpm_cc_change(chip->tcpm_port);
+	}
+	/* set MDAC to Rd threshold, and unmask I_COMP for unplug detection */
+	ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda);
+	if (ret < 0)
+		return ret;
+	/* unmask comp_chng interrupt */
+	ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASK,
+				     FUSB_REG_MASK_COMP_CHNG);
+	if (ret < 0) {
+		fusb302_log(chip,
+			    "cannot unmask comp_chng interrupt, ret=%d", ret);
+		return ret;
+	}
+	chip->intr_comp_chng = true;
+	fusb302_log(chip, "detected cc1=%s, cc2=%s",
+		    typec_cc_status_name[cc1],
+		    typec_cc_status_name[cc2]);
+
+	return ret;
+}
+
+static int fusb302_handle_togdone(struct fusb302_chip *chip)
+{
+	int ret = 0;
+	u8 status1a;
+	u8 togdone_result;
+
+	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS1A, &status1a);
+	if (ret < 0)
+		return ret;
+	togdone_result = (status1a >> FUSB_REG_STATUS1A_TOGSS_POS) &
+			 FUSB_REG_STATUS1A_TOGSS_MASK;
+	switch (togdone_result) {
+	case FUSB_REG_STATUS1A_TOGSS_SNK1:
+	case FUSB_REG_STATUS1A_TOGSS_SNK2:
+		return fusb302_handle_togdone_snk(chip, togdone_result);
+	case FUSB_REG_STATUS1A_TOGSS_SRC1:
+	case FUSB_REG_STATUS1A_TOGSS_SRC2:
+		return fusb302_handle_togdone_src(chip, togdone_result);
+	case FUSB_REG_STATUS1A_TOGSS_AA:
+		/* doesn't support */
+		fusb302_log(chip, "AudioAccessory not supported");
+		fusb302_set_toggling(chip, chip->toggling_mode);
+		break;
+	default:
+		fusb302_log(chip, "TOGDONE with an invalid state: %d",
+			    togdone_result);
+		fusb302_set_toggling(chip, chip->toggling_mode);
+		break;
+	}
+	return ret;
+}
+
+static int fusb302_pd_reset(struct fusb302_chip *chip)
+{
+	return fusb302_i2c_set_bits(chip, FUSB_REG_RESET,
+				    FUSB_REG_RESET_PD_RESET);
+}
+
+static int fusb302_pd_read_message(struct fusb302_chip *chip,
+				   struct pd_message *msg)
+{
+	int ret = 0;
+	u8 token;
+	u8 crc[4];
+	int len;
+
+	/* first SOP token */
+	ret = fusb302_i2c_read(chip, FUSB_REG_FIFOS, &token);
+	if (ret < 0)
+		return ret;
+	ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, 2,
+				     (u8 *)&msg->header);
+	if (ret < 0)
+		return ret;
+	len = pd_header_cnt_le(msg->header) * 4;
+	/* add 4 to length to include the CRC */
+	if (len > PD_MAX_PAYLOAD * 4) {
+		fusb302_log(chip, "PD message too long %d", len);
+		return -EINVAL;
+	}
+	if (len > 0) {
+		ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, len,
+					     (u8 *)msg->payload);
+		if (ret < 0)
+			return ret;
+	}
+	/* another 4 bytes to read CRC out */
+	ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, 4, crc);
+	if (ret < 0)
+		return ret;
+	fusb302_log(chip, "PD message header: %x", msg->header);
+	fusb302_log(chip, "PD message len: %d", len);
+
+	/*
+	 * Check if we've read off a GoodCRC message. If so then indicate to
+	 * TCPM that the previous transmission has completed. Otherwise we pass
+	 * the received message over to TCPM for processing.
+	 *
+	 * We make this check here instead of basing the reporting decision on
+	 * the IRQ event type, as it's possible for the chip to report the
+	 * TX_SUCCESS and GCRCSENT events out of order on occasion, so we need
+	 * to check the message type to ensure correct reporting to TCPM.
+	 */
+	if ((!len) && (pd_header_type_le(msg->header) == PD_CTRL_GOOD_CRC))
+		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS);
+	else
+		tcpm_pd_receive(chip->tcpm_port, msg);
+
+	return ret;
+}
+
+static irqreturn_t fusb302_irq_intn(int irq, void *dev_id)
+{
+	struct fusb302_chip *chip = dev_id;
+	unsigned long flags;
+
+	/* Disable our level triggered IRQ until our irq_work has cleared it */
+	disable_irq_nosync(chip->gpio_int_n_irq);
+
+	spin_lock_irqsave(&chip->irq_lock, flags);
+	if (chip->irq_suspended)
+		chip->irq_while_suspended = true;
+	else
+		schedule_work(&chip->irq_work);
+	spin_unlock_irqrestore(&chip->irq_lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static void fusb302_irq_work(struct work_struct *work)
+{
+	struct fusb302_chip *chip = container_of(work, struct fusb302_chip,
+						 irq_work);
+	int ret = 0;
+	u8 interrupt;
+	u8 interrupta;
+	u8 interruptb;
+	u8 status0;
+	bool vbus_present;
+	bool comp_result;
+	bool intr_togdone;
+	bool intr_bc_lvl;
+	bool intr_comp_chng;
+	struct pd_message pd_msg;
+
+	mutex_lock(&chip->lock);
+	/* grab a snapshot of intr flags */
+	intr_togdone = chip->intr_togdone;
+	intr_bc_lvl = chip->intr_bc_lvl;
+	intr_comp_chng = chip->intr_comp_chng;
+
+	ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPT, &interrupt);
+	if (ret < 0)
+		goto done;
+	ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPTA, &interrupta);
+	if (ret < 0)
+		goto done;
+	ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPTB, &interruptb);
+	if (ret < 0)
+		goto done;
+	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
+	if (ret < 0)
+		goto done;
+	fusb302_log(chip,
+		    "IRQ: 0x%02x, a: 0x%02x, b: 0x%02x, status0: 0x%02x",
+		    interrupt, interrupta, interruptb, status0);
+
+	if (interrupt & FUSB_REG_INTERRUPT_VBUSOK) {
+		vbus_present = !!(status0 & FUSB_REG_STATUS0_VBUSOK);
+		fusb302_log(chip, "IRQ: VBUS_OK, vbus=%s",
+			    vbus_present ? "On" : "Off");
+		if (vbus_present != chip->vbus_present) {
+			chip->vbus_present = vbus_present;
+			tcpm_vbus_change(chip->tcpm_port);
+		}
+	}
+
+	if ((interrupta & FUSB_REG_INTERRUPTA_TOGDONE) && intr_togdone) {
+		fusb302_log(chip, "IRQ: TOGDONE");
+		ret = fusb302_handle_togdone(chip);
+		if (ret < 0) {
+			fusb302_log(chip,
+				    "handle togdone error, ret=%d", ret);
+			goto done;
+		}
+	}
+
+	if ((interrupt & FUSB_REG_INTERRUPT_BC_LVL) && intr_bc_lvl) {
+		fusb302_log(chip, "IRQ: BC_LVL, handler pending");
+		/*
+		 * as BC_LVL interrupt can be affected by PD activity,
+		 * apply delay to for the handler to wait for the PD
+		 * signaling to finish.
+		 */
+		mod_delayed_work(chip->wq, &chip->bc_lvl_handler,
+				 msecs_to_jiffies(T_BC_LVL_DEBOUNCE_DELAY_MS));
+	}
+
+	if ((interrupt & FUSB_REG_INTERRUPT_COMP_CHNG) && intr_comp_chng) {
+		comp_result = !!(status0 & FUSB_REG_STATUS0_COMP);
+		fusb302_log(chip, "IRQ: COMP_CHNG, comp=%s",
+			    comp_result ? "true" : "false");
+		if (comp_result) {
+			/* cc level > Rd_threshold, detach */
+			chip->cc1 = TYPEC_CC_OPEN;
+			chip->cc2 = TYPEC_CC_OPEN;
+			tcpm_cc_change(chip->tcpm_port);
+		}
+	}
+
+	if (interrupt & FUSB_REG_INTERRUPT_COLLISION) {
+		fusb302_log(chip, "IRQ: PD collision");
+		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_FAILED);
+	}
+
+	if (interrupta & FUSB_REG_INTERRUPTA_RETRYFAIL) {
+		fusb302_log(chip, "IRQ: PD retry failed");
+		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_FAILED);
+	}
+
+	if (interrupta & FUSB_REG_INTERRUPTA_HARDSENT) {
+		fusb302_log(chip, "IRQ: PD hardreset sent");
+		ret = fusb302_pd_reset(chip);
+		if (ret < 0) {
+			fusb302_log(chip, "cannot PD reset, ret=%d", ret);
+			goto done;
+		}
+		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS);
+	}
+
+	if (interrupta & FUSB_REG_INTERRUPTA_TX_SUCCESS) {
+		fusb302_log(chip, "IRQ: PD tx success");
+		ret = fusb302_pd_read_message(chip, &pd_msg);
+		if (ret < 0) {
+			fusb302_log(chip,
+				    "cannot read in PD message, ret=%d", ret);
+			goto done;
+		}
+	}
+
+	if (interrupta & FUSB_REG_INTERRUPTA_HARDRESET) {
+		fusb302_log(chip, "IRQ: PD received hardreset");
+		ret = fusb302_pd_reset(chip);
+		if (ret < 0) {
+			fusb302_log(chip, "cannot PD reset, ret=%d", ret);
+			goto done;
+		}
+		tcpm_pd_hard_reset(chip->tcpm_port);
+	}
+
+	if (interruptb & FUSB_REG_INTERRUPTB_GCRCSENT) {
+		fusb302_log(chip, "IRQ: PD sent good CRC");
+		ret = fusb302_pd_read_message(chip, &pd_msg);
+		if (ret < 0) {
+			fusb302_log(chip,
+				    "cannot read in PD message, ret=%d", ret);
+			goto done;
+		}
+	}
+done:
+	mutex_unlock(&chip->lock);
+	enable_irq(chip->gpio_int_n_irq);
+}
+
+static int init_gpio(struct fusb302_chip *chip)
+{
+	struct device *dev = chip->dev;
+	int ret = 0;
+
+	chip->gpio_int_n = devm_gpiod_get(dev, "fcs,int_n", GPIOD_IN);
+	if (IS_ERR(chip->gpio_int_n)) {
+		dev_err(dev, "failed to request gpio_int_n\n");
+		return PTR_ERR(chip->gpio_int_n);
+	}
+	ret = gpiod_to_irq(chip->gpio_int_n);
+	if (ret < 0) {
+		dev_err(dev,
+			"cannot request IRQ for GPIO Int_N, ret=%d", ret);
+		return ret;
+	}
+	chip->gpio_int_n_irq = ret;
+	return 0;
+}
+
+#define PDO_FIXED_FLAGS \
+	(PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)
+
+static const u32 src_pdo[] = {
+	PDO_FIXED(5000, 400, PDO_FIXED_FLAGS)
+};
+
+static const u32 snk_pdo[] = {
+	PDO_FIXED(5000, 400, PDO_FIXED_FLAGS)
+};
+
+static const struct property_entry port_props[] = {
+	PROPERTY_ENTRY_STRING("data-role", "dual"),
+	PROPERTY_ENTRY_STRING("power-role", "dual"),
+	PROPERTY_ENTRY_STRING("try-power-role", "sink"),
+	PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo),
+	PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo),
+	PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000),
+	{ }
+};
+
+static struct fwnode_handle *fusb302_fwnode_get(struct device *dev)
+{
+	struct fwnode_handle *fwnode;
+
+	fwnode = device_get_named_child_node(dev, "connector");
+	if (!fwnode)
+		fwnode = fwnode_create_software_node(port_props, NULL);
+
+	return fwnode;
+}
+
+static int fusb302_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct fusb302_chip *chip;
+	struct i2c_adapter *adapter = client->adapter;
+	struct device *dev = &client->dev;
+	const char *name;
+	int ret = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
+		dev_err(&client->dev,
+			"I2C/SMBus block functionality not supported!\n");
+		return -ENODEV;
+	}
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->i2c_client = client;
+	chip->dev = &client->dev;
+	mutex_init(&chip->lock);
+
+	/*
+	 * Devicetree platforms should get extcon via phandle (not yet
+	 * supported). On ACPI platforms, we get the name from a device prop.
+	 * This device prop is for kernel internal use only and is expected
+	 * to be set by the platform code which also registers the i2c client
+	 * for the fusb302.
+	 */
+	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
+		chip->extcon = extcon_get_extcon_dev(name);
+		if (IS_ERR(chip->extcon))
+			return PTR_ERR(chip->extcon);
+	}
+
+	chip->vbus = devm_regulator_get(chip->dev, "vbus");
+	if (IS_ERR(chip->vbus))
+		return PTR_ERR(chip->vbus);
+
+	chip->wq = create_singlethread_workqueue(dev_name(chip->dev));
+	if (!chip->wq)
+		return -ENOMEM;
+
+	spin_lock_init(&chip->irq_lock);
+	INIT_WORK(&chip->irq_work, fusb302_irq_work);
+	INIT_DELAYED_WORK(&chip->bc_lvl_handler, fusb302_bc_lvl_handler_work);
+	init_tcpc_dev(&chip->tcpc_dev);
+	fusb302_debugfs_init(chip);
+
+	if (client->irq) {
+		chip->gpio_int_n_irq = client->irq;
+	} else {
+		ret = init_gpio(chip);
+		if (ret < 0)
+			goto destroy_workqueue;
+	}
+
+	chip->tcpc_dev.fwnode = fusb302_fwnode_get(dev);
+	if (IS_ERR(chip->tcpc_dev.fwnode)) {
+		ret = PTR_ERR(chip->tcpc_dev.fwnode);
+		goto destroy_workqueue;
+	}
+
+	chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev);
+	if (IS_ERR(chip->tcpm_port)) {
+		fwnode_handle_put(chip->tcpc_dev.fwnode);
+		ret = dev_err_probe(dev, PTR_ERR(chip->tcpm_port),
+				    "cannot register tcpm port\n");
+		goto destroy_workqueue;
+	}
+
+	ret = request_irq(chip->gpio_int_n_irq, fusb302_irq_intn,
+			  IRQF_ONESHOT | IRQF_TRIGGER_LOW,
+			  "fsc_interrupt_int_n", chip);
+	if (ret < 0) {
+		dev_err(dev, "cannot request IRQ for GPIO Int_N, ret=%d", ret);
+		goto tcpm_unregister_port;
+	}
+	enable_irq_wake(chip->gpio_int_n_irq);
+	i2c_set_clientdata(client, chip);
+
+	return ret;
+
+tcpm_unregister_port:
+	tcpm_unregister_port(chip->tcpm_port);
+	fwnode_handle_put(chip->tcpc_dev.fwnode);
+destroy_workqueue:
+	fusb302_debugfs_exit(chip);
+	destroy_workqueue(chip->wq);
+
+	return ret;
+}
+
+static void fusb302_remove(struct i2c_client *client)
+{
+	struct fusb302_chip *chip = i2c_get_clientdata(client);
+
+	disable_irq_wake(chip->gpio_int_n_irq);
+	free_irq(chip->gpio_int_n_irq, chip);
+	cancel_work_sync(&chip->irq_work);
+	cancel_delayed_work_sync(&chip->bc_lvl_handler);
+	tcpm_unregister_port(chip->tcpm_port);
+	fwnode_handle_put(chip->tcpc_dev.fwnode);
+	destroy_workqueue(chip->wq);
+	fusb302_debugfs_exit(chip);
+}
+
+static int fusb302_pm_suspend(struct device *dev)
+{
+	struct fusb302_chip *chip = dev->driver_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->irq_lock, flags);
+	chip->irq_suspended = true;
+	spin_unlock_irqrestore(&chip->irq_lock, flags);
+
+	/* Make sure any pending irq_work is finished before the bus suspends */
+	flush_work(&chip->irq_work);
+	return 0;
+}
+
+static int fusb302_pm_resume(struct device *dev)
+{
+	struct fusb302_chip *chip = dev->driver_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->irq_lock, flags);
+	if (chip->irq_while_suspended) {
+		schedule_work(&chip->irq_work);
+		chip->irq_while_suspended = false;
+	}
+	chip->irq_suspended = false;
+	spin_unlock_irqrestore(&chip->irq_lock, flags);
+
+	return 0;
+}
+
+static const struct of_device_id fusb302_dt_match[] = {
+	{.compatible = "fcs,fusb302"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, fusb302_dt_match);
+
+static const struct i2c_device_id fusb302_i2c_device_id[] = {
+	{"typec_fusb302", 0},
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, fusb302_i2c_device_id);
+
+static const struct dev_pm_ops fusb302_pm_ops = {
+	.suspend = fusb302_pm_suspend,
+	.resume = fusb302_pm_resume,
+};
+
+static struct i2c_driver fusb302_driver = {
+	.driver = {
+		   .name = "typec_fusb302",
+		   .pm = &fusb302_pm_ops,
+		   .of_match_table = of_match_ptr(fusb302_dt_match),
+		   },
+	.probe = fusb302_probe,
+	.remove = fusb302_remove,
+	.id_table = fusb302_i2c_device_id,
+};
+module_i2c_driver(fusb302_driver);
+
+MODULE_AUTHOR("Yueyao Zhu <yueyao.zhu@gmail.com>");
+MODULE_DESCRIPTION("Fairchild FUSB302 Type-C Chip Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/typec/tcpm/fusb302_reg.h b/drivers/usb/typec/tcpm/fusb302_reg.h
new file mode 100644
index 000000000..edc0e4b0f
--- /dev/null
+++ b/drivers/usb/typec/tcpm/fusb302_reg.h
@@ -0,0 +1,177 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016-2017 Google, Inc
+ *
+ * Fairchild FUSB302 Type-C Chip Driver
+ */
+
+#ifndef FUSB302_REG_H
+#define FUSB302_REG_H
+
+#define FUSB_REG_DEVICE_ID			0x01
+#define FUSB_REG_SWITCHES0			0x02
+#define FUSB_REG_SWITCHES0_CC2_PU_EN		BIT(7)
+#define FUSB_REG_SWITCHES0_CC1_PU_EN		BIT(6)
+#define FUSB_REG_SWITCHES0_VCONN_CC2		BIT(5)
+#define FUSB_REG_SWITCHES0_VCONN_CC1		BIT(4)
+#define FUSB_REG_SWITCHES0_MEAS_CC2		BIT(3)
+#define FUSB_REG_SWITCHES0_MEAS_CC1		BIT(2)
+#define FUSB_REG_SWITCHES0_CC2_PD_EN		BIT(1)
+#define FUSB_REG_SWITCHES0_CC1_PD_EN		BIT(0)
+#define FUSB_REG_SWITCHES1			0x03
+#define FUSB_REG_SWITCHES1_POWERROLE		BIT(7)
+#define FUSB_REG_SWITCHES1_SPECREV1		BIT(6)
+#define FUSB_REG_SWITCHES1_SPECREV0		BIT(5)
+#define FUSB_REG_SWITCHES1_DATAROLE		BIT(4)
+#define FUSB_REG_SWITCHES1_AUTO_GCRC		BIT(2)
+#define FUSB_REG_SWITCHES1_TXCC2_EN		BIT(1)
+#define FUSB_REG_SWITCHES1_TXCC1_EN		BIT(0)
+#define FUSB_REG_MEASURE			0x04
+#define FUSB_REG_MEASURE_MDAC5			BIT(7)
+#define FUSB_REG_MEASURE_MDAC4			BIT(6)
+#define FUSB_REG_MEASURE_MDAC3			BIT(5)
+#define FUSB_REG_MEASURE_MDAC2			BIT(4)
+#define FUSB_REG_MEASURE_MDAC1			BIT(3)
+#define FUSB_REG_MEASURE_MDAC0			BIT(2)
+#define FUSB_REG_MEASURE_VBUS			BIT(1)
+#define FUSB_REG_MEASURE_XXXX5			BIT(0)
+#define FUSB_REG_CONTROL0			0x06
+#define FUSB_REG_CONTROL0_TX_FLUSH		BIT(6)
+#define FUSB_REG_CONTROL0_INT_MASK		BIT(5)
+#define FUSB_REG_CONTROL0_HOST_CUR_MASK		(0xC)
+#define FUSB_REG_CONTROL0_HOST_CUR_HIGH		(0xC)
+#define FUSB_REG_CONTROL0_HOST_CUR_MED		(0x8)
+#define FUSB_REG_CONTROL0_HOST_CUR_DEF		(0x4)
+#define FUSB_REG_CONTROL0_TX_START		BIT(0)
+#define FUSB_REG_CONTROL1			0x07
+#define FUSB_REG_CONTROL1_ENSOP2DB		BIT(6)
+#define FUSB_REG_CONTROL1_ENSOP1DB		BIT(5)
+#define FUSB_REG_CONTROL1_BIST_MODE2		BIT(4)
+#define FUSB_REG_CONTROL1_RX_FLUSH		BIT(2)
+#define FUSB_REG_CONTROL1_ENSOP2		BIT(1)
+#define FUSB_REG_CONTROL1_ENSOP1		BIT(0)
+#define FUSB_REG_CONTROL2			0x08
+#define FUSB_REG_CONTROL2_MODE			BIT(1)
+#define FUSB_REG_CONTROL2_MODE_MASK		(0x6)
+#define FUSB_REG_CONTROL2_MODE_DFP		(0x6)
+#define FUSB_REG_CONTROL2_MODE_UFP		(0x4)
+#define FUSB_REG_CONTROL2_MODE_DRP		(0x2)
+#define FUSB_REG_CONTROL2_MODE_NONE		(0x0)
+#define FUSB_REG_CONTROL2_TOGGLE		BIT(0)
+#define FUSB_REG_CONTROL3			0x09
+#define FUSB_REG_CONTROL3_SEND_HARDRESET	BIT(6)
+#define FUSB_REG_CONTROL3_BIST_TMODE		BIT(5)	/* 302B Only */
+#define FUSB_REG_CONTROL3_AUTO_HARDRESET	BIT(4)
+#define FUSB_REG_CONTROL3_AUTO_SOFTRESET	BIT(3)
+#define FUSB_REG_CONTROL3_N_RETRIES		BIT(1)
+#define FUSB_REG_CONTROL3_N_RETRIES_MASK	(0x6)
+#define FUSB_REG_CONTROL3_N_RETRIES_3		(0x6)
+#define FUSB_REG_CONTROL3_N_RETRIES_2		(0x4)
+#define FUSB_REG_CONTROL3_N_RETRIES_1		(0x2)
+#define FUSB_REG_CONTROL3_AUTO_RETRY		BIT(0)
+#define FUSB_REG_MASK				0x0A
+#define FUSB_REG_MASK_VBUSOK			BIT(7)
+#define FUSB_REG_MASK_ACTIVITY			BIT(6)
+#define FUSB_REG_MASK_COMP_CHNG			BIT(5)
+#define FUSB_REG_MASK_CRC_CHK			BIT(4)
+#define FUSB_REG_MASK_ALERT			BIT(3)
+#define FUSB_REG_MASK_WAKE			BIT(2)
+#define FUSB_REG_MASK_COLLISION			BIT(1)
+#define FUSB_REG_MASK_BC_LVL			BIT(0)
+#define FUSB_REG_POWER				0x0B
+#define FUSB_REG_POWER_PWR			BIT(0)
+#define FUSB_REG_POWER_PWR_LOW			0x1
+#define FUSB_REG_POWER_PWR_MEDIUM		0x3
+#define FUSB_REG_POWER_PWR_HIGH			0x7
+#define FUSB_REG_POWER_PWR_ALL			0xF
+#define FUSB_REG_RESET				0x0C
+#define FUSB_REG_RESET_PD_RESET			BIT(1)
+#define FUSB_REG_RESET_SW_RESET			BIT(0)
+#define FUSB_REG_MASKA				0x0E
+#define FUSB_REG_MASKA_OCP_TEMP			BIT(7)
+#define FUSB_REG_MASKA_TOGDONE			BIT(6)
+#define FUSB_REG_MASKA_SOFTFAIL			BIT(5)
+#define FUSB_REG_MASKA_RETRYFAIL		BIT(4)
+#define FUSB_REG_MASKA_HARDSENT			BIT(3)
+#define FUSB_REG_MASKA_TX_SUCCESS		BIT(2)
+#define FUSB_REG_MASKA_SOFTRESET		BIT(1)
+#define FUSB_REG_MASKA_HARDRESET		BIT(0)
+#define FUSB_REG_MASKB				0x0F
+#define FUSB_REG_MASKB_GCRCSENT			BIT(0)
+#define FUSB_REG_STATUS0A			0x3C
+#define FUSB_REG_STATUS0A_SOFTFAIL		BIT(5)
+#define FUSB_REG_STATUS0A_RETRYFAIL		BIT(4)
+#define FUSB_REG_STATUS0A_POWER			BIT(2)
+#define FUSB_REG_STATUS0A_RX_SOFT_RESET		BIT(1)
+#define FUSB_REG_STATUS0A_RX_HARD_RESET		BIT(0)
+#define FUSB_REG_STATUS1A			0x3D
+#define FUSB_REG_STATUS1A_TOGSS			BIT(3)
+#define FUSB_REG_STATUS1A_TOGSS_RUNNING		0x0
+#define FUSB_REG_STATUS1A_TOGSS_SRC1		0x1
+#define FUSB_REG_STATUS1A_TOGSS_SRC2		0x2
+#define FUSB_REG_STATUS1A_TOGSS_SNK1		0x5
+#define FUSB_REG_STATUS1A_TOGSS_SNK2		0x6
+#define FUSB_REG_STATUS1A_TOGSS_AA		0x7
+#define FUSB_REG_STATUS1A_TOGSS_POS		(3)
+#define FUSB_REG_STATUS1A_TOGSS_MASK		(0x7)
+#define FUSB_REG_STATUS1A_RXSOP2DB		BIT(2)
+#define FUSB_REG_STATUS1A_RXSOP1DB		BIT(1)
+#define FUSB_REG_STATUS1A_RXSOP			BIT(0)
+#define FUSB_REG_INTERRUPTA			0x3E
+#define FUSB_REG_INTERRUPTA_OCP_TEMP		BIT(7)
+#define FUSB_REG_INTERRUPTA_TOGDONE		BIT(6)
+#define FUSB_REG_INTERRUPTA_SOFTFAIL		BIT(5)
+#define FUSB_REG_INTERRUPTA_RETRYFAIL		BIT(4)
+#define FUSB_REG_INTERRUPTA_HARDSENT		BIT(3)
+#define FUSB_REG_INTERRUPTA_TX_SUCCESS		BIT(2)
+#define FUSB_REG_INTERRUPTA_SOFTRESET		BIT(1)
+#define FUSB_REG_INTERRUPTA_HARDRESET		BIT(0)
+#define FUSB_REG_INTERRUPTB			0x3F
+#define FUSB_REG_INTERRUPTB_GCRCSENT		BIT(0)
+#define FUSB_REG_STATUS0			0x40
+#define FUSB_REG_STATUS0_VBUSOK			BIT(7)
+#define FUSB_REG_STATUS0_ACTIVITY		BIT(6)
+#define FUSB_REG_STATUS0_COMP			BIT(5)
+#define FUSB_REG_STATUS0_CRC_CHK		BIT(4)
+#define FUSB_REG_STATUS0_ALERT			BIT(3)
+#define FUSB_REG_STATUS0_WAKE			BIT(2)
+#define FUSB_REG_STATUS0_BC_LVL_MASK		0x03
+#define FUSB_REG_STATUS0_BC_LVL_0_200		0x0
+#define FUSB_REG_STATUS0_BC_LVL_200_600		0x1
+#define FUSB_REG_STATUS0_BC_LVL_600_1230	0x2
+#define FUSB_REG_STATUS0_BC_LVL_1230_MAX	0x3
+#define FUSB_REG_STATUS0_BC_LVL1		BIT(1)
+#define FUSB_REG_STATUS0_BC_LVL0		BIT(0)
+#define FUSB_REG_STATUS1			0x41
+#define FUSB_REG_STATUS1_RXSOP2			BIT(7)
+#define FUSB_REG_STATUS1_RXSOP1			BIT(6)
+#define FUSB_REG_STATUS1_RX_EMPTY		BIT(5)
+#define FUSB_REG_STATUS1_RX_FULL		BIT(4)
+#define FUSB_REG_STATUS1_TX_EMPTY		BIT(3)
+#define FUSB_REG_STATUS1_TX_FULL		BIT(2)
+#define FUSB_REG_INTERRUPT			0x42
+#define FUSB_REG_INTERRUPT_VBUSOK		BIT(7)
+#define FUSB_REG_INTERRUPT_ACTIVITY		BIT(6)
+#define FUSB_REG_INTERRUPT_COMP_CHNG		BIT(5)
+#define FUSB_REG_INTERRUPT_CRC_CHK		BIT(4)
+#define FUSB_REG_INTERRUPT_ALERT		BIT(3)
+#define FUSB_REG_INTERRUPT_WAKE			BIT(2)
+#define FUSB_REG_INTERRUPT_COLLISION		BIT(1)
+#define FUSB_REG_INTERRUPT_BC_LVL		BIT(0)
+#define FUSB_REG_FIFOS				0x43
+
+/* Tokens defined for the FUSB302 TX FIFO */
+enum fusb302_txfifo_tokens {
+	FUSB302_TKN_TXON = 0xA1,
+	FUSB302_TKN_SYNC1 = 0x12,
+	FUSB302_TKN_SYNC2 = 0x13,
+	FUSB302_TKN_SYNC3 = 0x1B,
+	FUSB302_TKN_RST1 = 0x15,
+	FUSB302_TKN_RST2 = 0x16,
+	FUSB302_TKN_PACKSYM = 0x80,
+	FUSB302_TKN_JAMCRC = 0xFF,
+	FUSB302_TKN_EOP = 0x14,
+	FUSB302_TKN_TXOFF = 0xFE,
+};
+
+#endif
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
new file mode 100644
index 000000000..816945913
--- /dev/null
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -0,0 +1,895 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015-2017 Google, Inc
+ *
+ * USB Type-C Port Controller Interface.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/usb/pd.h>
+#include <linux/usb/tcpci.h>
+#include <linux/usb/tcpm.h>
+#include <linux/usb/typec.h>
+
+#define	PD_RETRY_COUNT_DEFAULT			3
+#define	PD_RETRY_COUNT_3_0_OR_HIGHER		2
+#define	AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV	3500
+#define	VSINKPD_MIN_IR_DROP_MV			750
+#define	VSRC_NEW_MIN_PERCENT			95
+#define	VSRC_VALID_MIN_MV			500
+#define	VPPS_NEW_MIN_PERCENT			95
+#define	VPPS_VALID_MIN_MV			100
+#define	VSINKDISCONNECT_PD_MIN_PERCENT		90
+
+struct tcpci {
+	struct device *dev;
+
+	struct tcpm_port *port;
+
+	struct regmap *regmap;
+
+	bool controls_vbus;
+
+	struct tcpc_dev tcpc;
+	struct tcpci_data *data;
+};
+
+struct tcpci_chip {
+	struct tcpci *tcpci;
+	struct tcpci_data data;
+};
+
+struct tcpm_port *tcpci_get_tcpm_port(struct tcpci *tcpci)
+{
+	return tcpci->port;
+}
+EXPORT_SYMBOL_GPL(tcpci_get_tcpm_port);
+
+static inline struct tcpci *tcpc_to_tcpci(struct tcpc_dev *tcpc)
+{
+	return container_of(tcpc, struct tcpci, tcpc);
+}
+
+static int tcpci_read16(struct tcpci *tcpci, unsigned int reg, u16 *val)
+{
+	return regmap_raw_read(tcpci->regmap, reg, val, sizeof(u16));
+}
+
+static int tcpci_write16(struct tcpci *tcpci, unsigned int reg, u16 val)
+{
+	return regmap_raw_write(tcpci->regmap, reg, &val, sizeof(u16));
+}
+
+static int tcpci_set_cc(struct tcpc_dev *tcpc, enum typec_cc_status cc)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+	bool vconn_pres;
+	enum typec_cc_polarity polarity = TYPEC_POLARITY_CC1;
+	unsigned int reg;
+	int ret;
+
+	ret = regmap_read(tcpci->regmap, TCPC_POWER_STATUS, &reg);
+	if (ret < 0)
+		return ret;
+
+	vconn_pres = !!(reg & TCPC_POWER_STATUS_VCONN_PRES);
+	if (vconn_pres) {
+		ret = regmap_read(tcpci->regmap, TCPC_TCPC_CTRL, &reg);
+		if (ret < 0)
+			return ret;
+
+		if (reg & TCPC_TCPC_CTRL_ORIENTATION)
+			polarity = TYPEC_POLARITY_CC2;
+	}
+
+	switch (cc) {
+	case TYPEC_CC_RA:
+		reg = (TCPC_ROLE_CTRL_CC_RA << TCPC_ROLE_CTRL_CC1_SHIFT) |
+			(TCPC_ROLE_CTRL_CC_RA << TCPC_ROLE_CTRL_CC2_SHIFT);
+		break;
+	case TYPEC_CC_RD:
+		reg = (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT) |
+			(TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT);
+		break;
+	case TYPEC_CC_RP_DEF:
+		reg = (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT) |
+			(TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT) |
+			(TCPC_ROLE_CTRL_RP_VAL_DEF <<
+			 TCPC_ROLE_CTRL_RP_VAL_SHIFT);
+		break;
+	case TYPEC_CC_RP_1_5:
+		reg = (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT) |
+			(TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT) |
+			(TCPC_ROLE_CTRL_RP_VAL_1_5 <<
+			 TCPC_ROLE_CTRL_RP_VAL_SHIFT);
+		break;
+	case TYPEC_CC_RP_3_0:
+		reg = (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT) |
+			(TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT) |
+			(TCPC_ROLE_CTRL_RP_VAL_3_0 <<
+			 TCPC_ROLE_CTRL_RP_VAL_SHIFT);
+		break;
+	case TYPEC_CC_OPEN:
+	default:
+		reg = (TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC1_SHIFT) |
+			(TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC2_SHIFT);
+		break;
+	}
+
+	if (vconn_pres) {
+		if (polarity == TYPEC_POLARITY_CC2) {
+			reg &= ~(TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT);
+			reg |= (TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC1_SHIFT);
+		} else {
+			reg &= ~(TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT);
+			reg |= (TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC2_SHIFT);
+		}
+	}
+
+	ret = regmap_write(tcpci->regmap, TCPC_ROLE_CTRL, reg);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int tcpci_apply_rc(struct tcpc_dev *tcpc, enum typec_cc_status cc,
+			  enum typec_cc_polarity polarity)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+	unsigned int reg;
+	int ret;
+
+	ret = regmap_read(tcpci->regmap, TCPC_ROLE_CTRL, &reg);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * APPLY_RC state is when ROLE_CONTROL.CC1 != ROLE_CONTROL.CC2 and vbus autodischarge on
+	 * disconnect is disabled. Bail out when ROLE_CONTROL.CC1 != ROLE_CONTROL.CC2.
+	 */
+	if (((reg & (TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT)) >>
+	     TCPC_ROLE_CTRL_CC2_SHIFT) !=
+	    ((reg & (TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT)) >>
+	     TCPC_ROLE_CTRL_CC1_SHIFT))
+		return 0;
+
+	return regmap_update_bits(tcpci->regmap, TCPC_ROLE_CTRL, polarity == TYPEC_POLARITY_CC1 ?
+				  TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT :
+				  TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT,
+				  TCPC_ROLE_CTRL_CC_OPEN);
+}
+
+static int tcpci_start_toggling(struct tcpc_dev *tcpc,
+				enum typec_port_type port_type,
+				enum typec_cc_status cc)
+{
+	int ret;
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+	unsigned int reg = TCPC_ROLE_CTRL_DRP;
+
+	if (port_type != TYPEC_PORT_DRP)
+		return -EOPNOTSUPP;
+
+	/* Handle vendor drp toggling */
+	if (tcpci->data->start_drp_toggling) {
+		ret = tcpci->data->start_drp_toggling(tcpci, tcpci->data, cc);
+		if (ret < 0)
+			return ret;
+	}
+
+	switch (cc) {
+	default:
+	case TYPEC_CC_RP_DEF:
+		reg |= (TCPC_ROLE_CTRL_RP_VAL_DEF <<
+			TCPC_ROLE_CTRL_RP_VAL_SHIFT);
+		break;
+	case TYPEC_CC_RP_1_5:
+		reg |= (TCPC_ROLE_CTRL_RP_VAL_1_5 <<
+			TCPC_ROLE_CTRL_RP_VAL_SHIFT);
+		break;
+	case TYPEC_CC_RP_3_0:
+		reg |= (TCPC_ROLE_CTRL_RP_VAL_3_0 <<
+			TCPC_ROLE_CTRL_RP_VAL_SHIFT);
+		break;
+	}
+
+	if (cc == TYPEC_CC_RD)
+		reg |= (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT) |
+			   (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT);
+	else
+		reg |= (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT) |
+			   (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT);
+	ret = regmap_write(tcpci->regmap, TCPC_ROLE_CTRL, reg);
+	if (ret < 0)
+		return ret;
+	return regmap_write(tcpci->regmap, TCPC_COMMAND,
+			    TCPC_CMD_LOOK4CONNECTION);
+}
+
+static int tcpci_get_cc(struct tcpc_dev *tcpc,
+			enum typec_cc_status *cc1, enum typec_cc_status *cc2)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+	unsigned int reg, role_control;
+	int ret;
+
+	ret = regmap_read(tcpci->regmap, TCPC_ROLE_CTRL, &role_control);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(tcpci->regmap, TCPC_CC_STATUS, &reg);
+	if (ret < 0)
+		return ret;
+
+	*cc1 = tcpci_to_typec_cc((reg >> TCPC_CC_STATUS_CC1_SHIFT) &
+				 TCPC_CC_STATUS_CC1_MASK,
+				 reg & TCPC_CC_STATUS_TERM ||
+				 tcpc_presenting_rd(role_control, CC1));
+	*cc2 = tcpci_to_typec_cc((reg >> TCPC_CC_STATUS_CC2_SHIFT) &
+				 TCPC_CC_STATUS_CC2_MASK,
+				 reg & TCPC_CC_STATUS_TERM ||
+				 tcpc_presenting_rd(role_control, CC2));
+
+	return 0;
+}
+
+static int tcpci_set_polarity(struct tcpc_dev *tcpc,
+			      enum typec_cc_polarity polarity)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+	unsigned int reg;
+	int ret;
+	enum typec_cc_status cc1, cc2;
+
+	/* Obtain Rp setting from role control */
+	ret = regmap_read(tcpci->regmap, TCPC_ROLE_CTRL, &reg);
+	if (ret < 0)
+		return ret;
+
+	ret = tcpci_get_cc(tcpc, &cc1, &cc2);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * When port has drp toggling enabled, ROLE_CONTROL would only have the initial
+	 * terminations for the toggling and does not indicate the final cc
+	 * terminations when ConnectionResult is 0 i.e. drp toggling stops and
+	 * the connection is resolved. Infer port role from TCPC_CC_STATUS based on the
+	 * terminations seen. The port role is then used to set the cc terminations.
+	 */
+	if (reg & TCPC_ROLE_CTRL_DRP) {
+		/* Disable DRP for the OPEN setting to take effect */
+		reg = reg & ~TCPC_ROLE_CTRL_DRP;
+
+		if (polarity == TYPEC_POLARITY_CC2) {
+			reg &= ~(TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT);
+			/* Local port is source */
+			if (cc2 == TYPEC_CC_RD)
+				/* Role control would have the Rp setting when DRP was enabled */
+				reg |= TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT;
+			else
+				reg |= TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT;
+		} else {
+			reg &= ~(TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT);
+			/* Local port is source */
+			if (cc1 == TYPEC_CC_RD)
+				/* Role control would have the Rp setting when DRP was enabled */
+				reg |= TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT;
+			else
+				reg |= TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT;
+		}
+	}
+
+	if (polarity == TYPEC_POLARITY_CC2)
+		reg |= TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC1_SHIFT;
+	else
+		reg |= TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC2_SHIFT;
+	ret = regmap_write(tcpci->regmap, TCPC_ROLE_CTRL, reg);
+	if (ret < 0)
+		return ret;
+
+	return regmap_write(tcpci->regmap, TCPC_TCPC_CTRL,
+			   (polarity == TYPEC_POLARITY_CC2) ?
+			   TCPC_TCPC_CTRL_ORIENTATION : 0);
+}
+
+static void tcpci_set_partner_usb_comm_capable(struct tcpc_dev *tcpc, bool capable)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+
+	if (tcpci->data->set_partner_usb_comm_capable)
+		tcpci->data->set_partner_usb_comm_capable(tcpci, tcpci->data, capable);
+}
+
+static int tcpci_set_vconn(struct tcpc_dev *tcpc, bool enable)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+	int ret;
+
+	/* Handle vendor set vconn */
+	if (tcpci->data->set_vconn) {
+		ret = tcpci->data->set_vconn(tcpci, tcpci->data, enable);
+		if (ret < 0)
+			return ret;
+	}
+
+	return regmap_update_bits(tcpci->regmap, TCPC_POWER_CTRL,
+				TCPC_POWER_CTRL_VCONN_ENABLE,
+				enable ? TCPC_POWER_CTRL_VCONN_ENABLE : 0);
+}
+
+static int tcpci_enable_auto_vbus_discharge(struct tcpc_dev *dev, bool enable)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(dev);
+	int ret;
+
+	ret = regmap_update_bits(tcpci->regmap, TCPC_POWER_CTRL, TCPC_POWER_CTRL_AUTO_DISCHARGE,
+				 enable ? TCPC_POWER_CTRL_AUTO_DISCHARGE : 0);
+	return ret;
+}
+
+static int tcpci_set_auto_vbus_discharge_threshold(struct tcpc_dev *dev, enum typec_pwr_opmode mode,
+						   bool pps_active, u32 requested_vbus_voltage_mv)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(dev);
+	unsigned int pwr_ctrl, threshold = 0;
+	int ret;
+
+	/*
+	 * Indicates that vbus is going to go away due PR_SWAP, hard reset etc.
+	 * Do not discharge vbus here.
+	 */
+	if (requested_vbus_voltage_mv == 0)
+		goto write_thresh;
+
+	ret = regmap_read(tcpci->regmap, TCPC_POWER_CTRL, &pwr_ctrl);
+	if (ret < 0)
+		return ret;
+
+	if (pwr_ctrl & TCPC_FAST_ROLE_SWAP_EN) {
+		/* To prevent disconnect when the source is fast role swap is capable. */
+		threshold = AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV;
+	} else if (mode == TYPEC_PWR_MODE_PD) {
+		if (pps_active)
+			threshold = ((VPPS_NEW_MIN_PERCENT * requested_vbus_voltage_mv / 100) -
+				     VSINKPD_MIN_IR_DROP_MV - VPPS_VALID_MIN_MV) *
+				     VSINKDISCONNECT_PD_MIN_PERCENT / 100;
+		else
+			threshold = ((VSRC_NEW_MIN_PERCENT * requested_vbus_voltage_mv / 100) -
+				     VSINKPD_MIN_IR_DROP_MV - VSRC_VALID_MIN_MV) *
+				     VSINKDISCONNECT_PD_MIN_PERCENT / 100;
+	} else {
+		/* 3.5V for non-pd sink */
+		threshold = AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV;
+	}
+
+	threshold = threshold / TCPC_VBUS_SINK_DISCONNECT_THRESH_LSB_MV;
+
+	if (threshold > TCPC_VBUS_SINK_DISCONNECT_THRESH_MAX)
+		return -EINVAL;
+
+write_thresh:
+	return tcpci_write16(tcpci, TCPC_VBUS_SINK_DISCONNECT_THRESH, threshold);
+}
+
+static int tcpci_enable_frs(struct tcpc_dev *dev, bool enable)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(dev);
+	int ret;
+
+	/* To prevent disconnect during FRS, set disconnect threshold to 3.5V */
+	ret = tcpci_write16(tcpci, TCPC_VBUS_SINK_DISCONNECT_THRESH, enable ? 0 : 0x8c);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(tcpci->regmap, TCPC_POWER_CTRL, TCPC_FAST_ROLE_SWAP_EN, enable ?
+				 TCPC_FAST_ROLE_SWAP_EN : 0);
+
+	return ret;
+}
+
+static void tcpci_frs_sourcing_vbus(struct tcpc_dev *dev)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(dev);
+
+	if (tcpci->data->frs_sourcing_vbus)
+		tcpci->data->frs_sourcing_vbus(tcpci, tcpci->data);
+}
+
+static int tcpci_set_bist_data(struct tcpc_dev *tcpc, bool enable)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+
+	return regmap_update_bits(tcpci->regmap, TCPC_TCPC_CTRL, TCPC_TCPC_CTRL_BIST_TM,
+				 enable ? TCPC_TCPC_CTRL_BIST_TM : 0);
+}
+
+static int tcpci_set_roles(struct tcpc_dev *tcpc, bool attached,
+			   enum typec_role role, enum typec_data_role data)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+	unsigned int reg;
+	int ret;
+
+	reg = PD_REV20 << TCPC_MSG_HDR_INFO_REV_SHIFT;
+	if (role == TYPEC_SOURCE)
+		reg |= TCPC_MSG_HDR_INFO_PWR_ROLE;
+	if (data == TYPEC_HOST)
+		reg |= TCPC_MSG_HDR_INFO_DATA_ROLE;
+	ret = regmap_write(tcpci->regmap, TCPC_MSG_HDR_INFO, reg);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int tcpci_set_pd_rx(struct tcpc_dev *tcpc, bool enable)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+	unsigned int reg = 0;
+	int ret;
+
+	if (enable)
+		reg = TCPC_RX_DETECT_SOP | TCPC_RX_DETECT_HARD_RESET;
+	ret = regmap_write(tcpci->regmap, TCPC_RX_DETECT, reg);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int tcpci_get_vbus(struct tcpc_dev *tcpc)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+	unsigned int reg;
+	int ret;
+
+	ret = regmap_read(tcpci->regmap, TCPC_POWER_STATUS, &reg);
+	if (ret < 0)
+		return ret;
+
+	return !!(reg & TCPC_POWER_STATUS_VBUS_PRES);
+}
+
+static bool tcpci_is_vbus_vsafe0v(struct tcpc_dev *tcpc)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+	unsigned int reg;
+	int ret;
+
+	ret = regmap_read(tcpci->regmap, TCPC_EXTENDED_STATUS, &reg);
+	if (ret < 0)
+		return false;
+
+	return !!(reg & TCPC_EXTENDED_STATUS_VSAFE0V);
+}
+
+static int tcpci_set_vbus(struct tcpc_dev *tcpc, bool source, bool sink)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+	int ret;
+
+	if (tcpci->data->set_vbus) {
+		ret = tcpci->data->set_vbus(tcpci, tcpci->data, source, sink);
+		/* Bypass when ret > 0 */
+		if (ret != 0)
+			return ret < 0 ? ret : 0;
+	}
+
+	/* Disable both source and sink first before enabling anything */
+
+	if (!source) {
+		ret = regmap_write(tcpci->regmap, TCPC_COMMAND,
+				   TCPC_CMD_DISABLE_SRC_VBUS);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (!sink) {
+		ret = regmap_write(tcpci->regmap, TCPC_COMMAND,
+				   TCPC_CMD_DISABLE_SINK_VBUS);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (source) {
+		ret = regmap_write(tcpci->regmap, TCPC_COMMAND,
+				   TCPC_CMD_SRC_VBUS_DEFAULT);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (sink) {
+		ret = regmap_write(tcpci->regmap, TCPC_COMMAND,
+				   TCPC_CMD_SINK_VBUS);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int tcpci_pd_transmit(struct tcpc_dev *tcpc, enum tcpm_transmit_type type,
+			     const struct pd_message *msg, unsigned int negotiated_rev)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+	u16 header = msg ? le16_to_cpu(msg->header) : 0;
+	unsigned int reg, cnt;
+	int ret;
+
+	cnt = msg ? pd_header_cnt(header) * 4 : 0;
+	/**
+	 * TCPCI spec forbids direct access of TCPC_TX_DATA.
+	 * But, since some of the chipsets offer this capability,
+	 * it's fair to support both.
+	 */
+	if (tcpci->data->TX_BUF_BYTE_x_hidden) {
+		u8 buf[TCPC_TRANSMIT_BUFFER_MAX_LEN] = {0,};
+		u8 pos = 0;
+
+		/* Payload + header + TCPC_TX_BYTE_CNT */
+		buf[pos++] = cnt + 2;
+
+		if (msg)
+			memcpy(&buf[pos], &msg->header, sizeof(msg->header));
+
+		pos += sizeof(header);
+
+		if (cnt > 0)
+			memcpy(&buf[pos], msg->payload, cnt);
+
+		pos += cnt;
+		ret = regmap_raw_write(tcpci->regmap, TCPC_TX_BYTE_CNT, buf, pos);
+		if (ret < 0)
+			return ret;
+	} else {
+		ret = regmap_write(tcpci->regmap, TCPC_TX_BYTE_CNT, cnt + 2);
+		if (ret < 0)
+			return ret;
+
+		ret = tcpci_write16(tcpci, TCPC_TX_HDR, header);
+		if (ret < 0)
+			return ret;
+
+		if (cnt > 0) {
+			ret = regmap_raw_write(tcpci->regmap, TCPC_TX_DATA, &msg->payload, cnt);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	/* nRetryCount is 3 in PD2.0 spec where 2 in PD3.0 spec */
+	reg = ((negotiated_rev > PD_REV20 ? PD_RETRY_COUNT_3_0_OR_HIGHER : PD_RETRY_COUNT_DEFAULT)
+	       << TCPC_TRANSMIT_RETRY_SHIFT) | (type << TCPC_TRANSMIT_TYPE_SHIFT);
+	ret = regmap_write(tcpci->regmap, TCPC_TRANSMIT, reg);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int tcpci_init(struct tcpc_dev *tcpc)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+	unsigned long timeout = jiffies + msecs_to_jiffies(2000); /* XXX */
+	unsigned int reg;
+	int ret;
+
+	while (time_before_eq(jiffies, timeout)) {
+		ret = regmap_read(tcpci->regmap, TCPC_POWER_STATUS, &reg);
+		if (ret < 0)
+			return ret;
+		if (!(reg & TCPC_POWER_STATUS_UNINIT))
+			break;
+		usleep_range(10000, 20000);
+	}
+	if (time_after(jiffies, timeout))
+		return -ETIMEDOUT;
+
+	ret = tcpci_write16(tcpci, TCPC_FAULT_STATUS, TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT);
+	if (ret < 0)
+		return ret;
+
+	/* Handle vendor init */
+	if (tcpci->data->init) {
+		ret = tcpci->data->init(tcpci, tcpci->data);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Clear all events */
+	ret = tcpci_write16(tcpci, TCPC_ALERT, 0xffff);
+	if (ret < 0)
+		return ret;
+
+	if (tcpci->controls_vbus)
+		reg = TCPC_POWER_STATUS_VBUS_PRES;
+	else
+		reg = 0;
+	ret = regmap_write(tcpci->regmap, TCPC_POWER_STATUS_MASK, reg);
+	if (ret < 0)
+		return ret;
+
+	/* Enable Vbus detection */
+	ret = regmap_write(tcpci->regmap, TCPC_COMMAND,
+			   TCPC_CMD_ENABLE_VBUS_DETECT);
+	if (ret < 0)
+		return ret;
+
+	reg = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_FAILED |
+		TCPC_ALERT_TX_DISCARDED | TCPC_ALERT_RX_STATUS |
+		TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_CC_STATUS;
+	if (tcpci->controls_vbus)
+		reg |= TCPC_ALERT_POWER_STATUS;
+	/* Enable VSAFE0V status interrupt when detecting VSAFE0V is supported */
+	if (tcpci->data->vbus_vsafe0v) {
+		reg |= TCPC_ALERT_EXTENDED_STATUS;
+		ret = regmap_write(tcpci->regmap, TCPC_EXTENDED_STATUS_MASK,
+				   TCPC_EXTENDED_STATUS_VSAFE0V);
+		if (ret < 0)
+			return ret;
+	}
+	return tcpci_write16(tcpci, TCPC_ALERT_MASK, reg);
+}
+
+irqreturn_t tcpci_irq(struct tcpci *tcpci)
+{
+	u16 status;
+	int ret;
+	unsigned int raw;
+
+	tcpci_read16(tcpci, TCPC_ALERT, &status);
+
+	/*
+	 * Clear alert status for everything except RX_STATUS, which shouldn't
+	 * be cleared until we have successfully retrieved message.
+	 */
+	if (status & ~TCPC_ALERT_RX_STATUS)
+		tcpci_write16(tcpci, TCPC_ALERT,
+			      status & ~TCPC_ALERT_RX_STATUS);
+
+	if (status & TCPC_ALERT_CC_STATUS)
+		tcpm_cc_change(tcpci->port);
+
+	if (status & TCPC_ALERT_POWER_STATUS) {
+		regmap_read(tcpci->regmap, TCPC_POWER_STATUS_MASK, &raw);
+		/*
+		 * If power status mask has been reset, then the TCPC
+		 * has reset.
+		 */
+		if (raw == 0xff)
+			tcpm_tcpc_reset(tcpci->port);
+		else
+			tcpm_vbus_change(tcpci->port);
+	}
+
+	if (status & TCPC_ALERT_RX_STATUS) {
+		struct pd_message msg;
+		unsigned int cnt, payload_cnt;
+		u16 header;
+
+		regmap_read(tcpci->regmap, TCPC_RX_BYTE_CNT, &cnt);
+		/*
+		 * 'cnt' corresponds to READABLE_BYTE_COUNT in section 4.4.14
+		 * of the TCPCI spec [Rev 2.0 Ver 1.0 October 2017] and is
+		 * defined in table 4-36 as one greater than the number of
+		 * bytes received. And that number includes the header. So:
+		 */
+		if (cnt > 3)
+			payload_cnt = cnt - (1 + sizeof(msg.header));
+		else
+			payload_cnt = 0;
+
+		tcpci_read16(tcpci, TCPC_RX_HDR, &header);
+		msg.header = cpu_to_le16(header);
+
+		if (WARN_ON(payload_cnt > sizeof(msg.payload)))
+			payload_cnt = sizeof(msg.payload);
+
+		if (payload_cnt > 0)
+			regmap_raw_read(tcpci->regmap, TCPC_RX_DATA,
+					&msg.payload, payload_cnt);
+
+		/* Read complete, clear RX status alert bit */
+		tcpci_write16(tcpci, TCPC_ALERT, TCPC_ALERT_RX_STATUS);
+
+		tcpm_pd_receive(tcpci->port, &msg);
+	}
+
+	if (tcpci->data->vbus_vsafe0v && (status & TCPC_ALERT_EXTENDED_STATUS)) {
+		ret = regmap_read(tcpci->regmap, TCPC_EXTENDED_STATUS, &raw);
+		if (!ret && (raw & TCPC_EXTENDED_STATUS_VSAFE0V))
+			tcpm_vbus_change(tcpci->port);
+	}
+
+	if (status & TCPC_ALERT_RX_HARD_RST)
+		tcpm_pd_hard_reset(tcpci->port);
+
+	if (status & TCPC_ALERT_TX_SUCCESS)
+		tcpm_pd_transmit_complete(tcpci->port, TCPC_TX_SUCCESS);
+	else if (status & TCPC_ALERT_TX_DISCARDED)
+		tcpm_pd_transmit_complete(tcpci->port, TCPC_TX_DISCARDED);
+	else if (status & TCPC_ALERT_TX_FAILED)
+		tcpm_pd_transmit_complete(tcpci->port, TCPC_TX_FAILED);
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL_GPL(tcpci_irq);
+
+static irqreturn_t _tcpci_irq(int irq, void *dev_id)
+{
+	struct tcpci_chip *chip = dev_id;
+
+	return tcpci_irq(chip->tcpci);
+}
+
+static const struct regmap_config tcpci_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = 0x7F, /* 0x80 .. 0xFF are vendor defined */
+};
+
+static int tcpci_parse_config(struct tcpci *tcpci)
+{
+	tcpci->controls_vbus = true; /* XXX */
+
+	tcpci->tcpc.fwnode = device_get_named_child_node(tcpci->dev,
+							 "connector");
+	if (!tcpci->tcpc.fwnode) {
+		dev_err(tcpci->dev, "Can't find connector node.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data)
+{
+	struct tcpci *tcpci;
+	int err;
+
+	tcpci = devm_kzalloc(dev, sizeof(*tcpci), GFP_KERNEL);
+	if (!tcpci)
+		return ERR_PTR(-ENOMEM);
+
+	tcpci->dev = dev;
+	tcpci->data = data;
+	tcpci->regmap = data->regmap;
+
+	tcpci->tcpc.init = tcpci_init;
+	tcpci->tcpc.get_vbus = tcpci_get_vbus;
+	tcpci->tcpc.set_vbus = tcpci_set_vbus;
+	tcpci->tcpc.set_cc = tcpci_set_cc;
+	tcpci->tcpc.apply_rc = tcpci_apply_rc;
+	tcpci->tcpc.get_cc = tcpci_get_cc;
+	tcpci->tcpc.set_polarity = tcpci_set_polarity;
+	tcpci->tcpc.set_vconn = tcpci_set_vconn;
+	tcpci->tcpc.start_toggling = tcpci_start_toggling;
+
+	tcpci->tcpc.set_pd_rx = tcpci_set_pd_rx;
+	tcpci->tcpc.set_roles = tcpci_set_roles;
+	tcpci->tcpc.pd_transmit = tcpci_pd_transmit;
+	tcpci->tcpc.set_bist_data = tcpci_set_bist_data;
+	tcpci->tcpc.enable_frs = tcpci_enable_frs;
+	tcpci->tcpc.frs_sourcing_vbus = tcpci_frs_sourcing_vbus;
+	tcpci->tcpc.set_partner_usb_comm_capable = tcpci_set_partner_usb_comm_capable;
+
+	if (tcpci->data->auto_discharge_disconnect) {
+		tcpci->tcpc.enable_auto_vbus_discharge = tcpci_enable_auto_vbus_discharge;
+		tcpci->tcpc.set_auto_vbus_discharge_threshold =
+			tcpci_set_auto_vbus_discharge_threshold;
+		regmap_update_bits(tcpci->regmap, TCPC_POWER_CTRL, TCPC_POWER_CTRL_BLEED_DISCHARGE,
+				   TCPC_POWER_CTRL_BLEED_DISCHARGE);
+	}
+
+	if (tcpci->data->vbus_vsafe0v)
+		tcpci->tcpc.is_vbus_vsafe0v = tcpci_is_vbus_vsafe0v;
+
+	err = tcpci_parse_config(tcpci);
+	if (err < 0)
+		return ERR_PTR(err);
+
+	tcpci->port = tcpm_register_port(tcpci->dev, &tcpci->tcpc);
+	if (IS_ERR(tcpci->port)) {
+		fwnode_handle_put(tcpci->tcpc.fwnode);
+		return ERR_CAST(tcpci->port);
+	}
+
+	return tcpci;
+}
+EXPORT_SYMBOL_GPL(tcpci_register_port);
+
+void tcpci_unregister_port(struct tcpci *tcpci)
+{
+	tcpm_unregister_port(tcpci->port);
+	fwnode_handle_put(tcpci->tcpc.fwnode);
+}
+EXPORT_SYMBOL_GPL(tcpci_unregister_port);
+
+static int tcpci_probe(struct i2c_client *client,
+		       const struct i2c_device_id *i2c_id)
+{
+	struct tcpci_chip *chip;
+	int err;
+	u16 val = 0;
+
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->data.regmap = devm_regmap_init_i2c(client, &tcpci_regmap_config);
+	if (IS_ERR(chip->data.regmap))
+		return PTR_ERR(chip->data.regmap);
+
+	i2c_set_clientdata(client, chip);
+
+	/* Disable chip interrupts before requesting irq */
+	err = regmap_raw_write(chip->data.regmap, TCPC_ALERT_MASK, &val,
+			       sizeof(u16));
+	if (err < 0)
+		return err;
+
+	chip->tcpci = tcpci_register_port(&client->dev, &chip->data);
+	if (IS_ERR(chip->tcpci))
+		return PTR_ERR(chip->tcpci);
+
+	err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					_tcpci_irq,
+					IRQF_ONESHOT | IRQF_TRIGGER_LOW,
+					dev_name(&client->dev), chip);
+	if (err < 0) {
+		tcpci_unregister_port(chip->tcpci);
+		return err;
+	}
+
+	return 0;
+}
+
+static void tcpci_remove(struct i2c_client *client)
+{
+	struct tcpci_chip *chip = i2c_get_clientdata(client);
+	int err;
+
+	/* Disable chip interrupts before unregistering port */
+	err = tcpci_write16(chip->tcpci, TCPC_ALERT_MASK, 0);
+	if (err < 0)
+		dev_warn(&client->dev, "Failed to disable irqs (%pe)\n", ERR_PTR(err));
+
+	tcpci_unregister_port(chip->tcpci);
+}
+
+static const struct i2c_device_id tcpci_id[] = {
+	{ "tcpci", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tcpci_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id tcpci_of_match[] = {
+	{ .compatible = "nxp,ptn5110", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, tcpci_of_match);
+#endif
+
+static struct i2c_driver tcpci_i2c_driver = {
+	.driver = {
+		.name = "tcpci",
+		.of_match_table = of_match_ptr(tcpci_of_match),
+	},
+	.probe = tcpci_probe,
+	.remove = tcpci_remove,
+	.id_table = tcpci_id,
+};
+module_i2c_driver(tcpci_i2c_driver);
+
+MODULE_DESCRIPTION("USB Type-C Port Controller Interface driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c b/drivers/usb/typec/tcpm/tcpci_maxim.c
new file mode 100644
index 000000000..03f89e6f1
--- /dev/null
+++ b/drivers/usb/typec/tcpm/tcpci_maxim.c
@@ -0,0 +1,530 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020, Google LLC
+ *
+ * MAXIM TCPCI based TCPC driver
+ */
+
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/usb/pd.h>
+#include <linux/usb/tcpci.h>
+#include <linux/usb/tcpm.h>
+#include <linux/usb/typec.h>
+
+#define PD_ACTIVITY_TIMEOUT_MS				10000
+
+#define TCPC_VENDOR_ALERT				0x80
+#define TCPC_VENDOR_USBSW_CTRL				0x93
+#define TCPC_VENDOR_USBSW_CTRL_ENABLE_USB_DATA		0x9
+#define TCPC_VENDOR_USBSW_CTRL_DISABLE_USB_DATA		0
+
+#define TCPC_RECEIVE_BUFFER_COUNT_OFFSET		0
+#define TCPC_RECEIVE_BUFFER_FRAME_TYPE_OFFSET		1
+#define TCPC_RECEIVE_BUFFER_RX_BYTE_BUF_OFFSET		2
+
+/*
+ * LongMessage not supported, hence 32 bytes for buf to be read from RECEIVE_BUFFER.
+ * DEVICE_CAPABILITIES_2.LongMessage = 0, the value in READABLE_BYTE_COUNT reg shall be
+ * less than or equal to 31. Since, RECEIVE_BUFFER len = 31 + 1(READABLE_BYTE_COUNT).
+ */
+#define TCPC_RECEIVE_BUFFER_LEN				32
+
+#define MAX_BUCK_BOOST_SID				0x69
+#define MAX_BUCK_BOOST_OP				0xb9
+#define MAX_BUCK_BOOST_OFF				0
+#define MAX_BUCK_BOOST_SOURCE				0xa
+#define MAX_BUCK_BOOST_SINK				0x5
+
+struct max_tcpci_chip {
+	struct tcpci_data data;
+	struct tcpci *tcpci;
+	struct device *dev;
+	struct i2c_client *client;
+	struct tcpm_port *port;
+};
+
+static const struct regmap_range max_tcpci_tcpci_range[] = {
+	regmap_reg_range(0x00, 0x95)
+};
+
+static const struct regmap_access_table max_tcpci_tcpci_write_table = {
+	.yes_ranges = max_tcpci_tcpci_range,
+	.n_yes_ranges = ARRAY_SIZE(max_tcpci_tcpci_range),
+};
+
+static const struct regmap_config max_tcpci_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x95,
+	.wr_table = &max_tcpci_tcpci_write_table,
+};
+
+static struct max_tcpci_chip *tdata_to_max_tcpci(struct tcpci_data *tdata)
+{
+	return container_of(tdata, struct max_tcpci_chip, data);
+}
+
+static int max_tcpci_read16(struct max_tcpci_chip *chip, unsigned int reg, u16 *val)
+{
+	return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u16));
+}
+
+static int max_tcpci_write16(struct max_tcpci_chip *chip, unsigned int reg, u16 val)
+{
+	return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u16));
+}
+
+static int max_tcpci_read8(struct max_tcpci_chip *chip, unsigned int reg, u8 *val)
+{
+	return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u8));
+}
+
+static int max_tcpci_write8(struct max_tcpci_chip *chip, unsigned int reg, u8 val)
+{
+	return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u8));
+}
+
+static void max_tcpci_init_regs(struct max_tcpci_chip *chip)
+{
+	u16 alert_mask = 0;
+	int ret;
+
+	ret = max_tcpci_write16(chip, TCPC_ALERT, 0xffff);
+	if (ret < 0) {
+		dev_err(chip->dev, "Error writing to TCPC_ALERT ret:%d\n", ret);
+		return;
+	}
+
+	ret = max_tcpci_write16(chip, TCPC_VENDOR_ALERT, 0xffff);
+	if (ret < 0) {
+		dev_err(chip->dev, "Error writing to TCPC_VENDOR_ALERT ret:%d\n", ret);
+		return;
+	}
+
+	ret = max_tcpci_write8(chip, TCPC_ALERT_EXTENDED, 0xff);
+	if (ret < 0) {
+		dev_err(chip->dev, "Unable to clear TCPC_ALERT_EXTENDED ret:%d\n", ret);
+		return;
+	}
+
+	/* Enable VSAFE0V detection */
+	ret = max_tcpci_write8(chip, TCPC_EXTENDED_STATUS_MASK, TCPC_EXTENDED_STATUS_VSAFE0V);
+	if (ret < 0) {
+		dev_err(chip->dev, "Unable to unmask TCPC_EXTENDED_STATUS_VSAFE0V ret:%d\n", ret);
+		return;
+	}
+
+	alert_mask = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_DISCARDED | TCPC_ALERT_TX_FAILED |
+		TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_RX_STATUS | TCPC_ALERT_CC_STATUS |
+		TCPC_ALERT_VBUS_DISCNCT | TCPC_ALERT_RX_BUF_OVF | TCPC_ALERT_POWER_STATUS |
+		/* Enable Extended alert for detecting Fast Role Swap Signal */
+		TCPC_ALERT_EXTND | TCPC_ALERT_EXTENDED_STATUS;
+
+	ret = max_tcpci_write16(chip, TCPC_ALERT_MASK, alert_mask);
+	if (ret < 0) {
+		dev_err(chip->dev,
+			"Error enabling TCPC_ALERT: TCPC_ALERT_MASK write failed ret:%d\n", ret);
+		return;
+	}
+
+	/* Enable vbus voltage monitoring and voltage alerts */
+	ret = max_tcpci_write8(chip, TCPC_POWER_CTRL, 0);
+	if (ret < 0) {
+		dev_err(chip->dev, "Error writing to TCPC_POWER_CTRL ret:%d\n", ret);
+		return;
+	}
+
+	ret = max_tcpci_write8(chip, TCPC_ALERT_EXTENDED_MASK, TCPC_SINK_FAST_ROLE_SWAP);
+	if (ret < 0)
+		return;
+}
+
+static void process_rx(struct max_tcpci_chip *chip, u16 status)
+{
+	struct pd_message msg;
+	u8 count, frame_type, rx_buf[TCPC_RECEIVE_BUFFER_LEN];
+	int ret, payload_index;
+	u8 *rx_buf_ptr;
+
+	/*
+	 * READABLE_BYTE_COUNT: Indicates the number of bytes in the RX_BUF_BYTE_x registers
+	 * plus one (for the RX_BUF_FRAME_TYPE) Table 4-36.
+	 * Read the count and frame type.
+	 */
+	ret = regmap_raw_read(chip->data.regmap, TCPC_RX_BYTE_CNT, rx_buf, 2);
+	if (ret < 0) {
+		dev_err(chip->dev, "TCPC_RX_BYTE_CNT read failed ret:%d\n", ret);
+		return;
+	}
+
+	count = rx_buf[TCPC_RECEIVE_BUFFER_COUNT_OFFSET];
+	frame_type = rx_buf[TCPC_RECEIVE_BUFFER_FRAME_TYPE_OFFSET];
+
+	if (count == 0 || frame_type != TCPC_RX_BUF_FRAME_TYPE_SOP) {
+		max_tcpci_write16(chip, TCPC_ALERT, TCPC_ALERT_RX_STATUS);
+		dev_err(chip->dev, "%s\n", count ==  0 ? "error: count is 0" :
+			"error frame_type is not SOP");
+		return;
+	}
+
+	if (count > sizeof(struct pd_message) || count + 1 > TCPC_RECEIVE_BUFFER_LEN) {
+		dev_err(chip->dev, "Invalid TCPC_RX_BYTE_CNT %d\n", count);
+		return;
+	}
+
+	/*
+	 * Read count + 1 as RX_BUF_BYTE_x is hidden and can only be read through
+	 * TCPC_RX_BYTE_CNT
+	 */
+	count += 1;
+	ret = regmap_raw_read(chip->data.regmap, TCPC_RX_BYTE_CNT, rx_buf, count);
+	if (ret < 0) {
+		dev_err(chip->dev, "Error: TCPC_RX_BYTE_CNT read failed: %d\n", ret);
+		return;
+	}
+
+	rx_buf_ptr = rx_buf + TCPC_RECEIVE_BUFFER_RX_BYTE_BUF_OFFSET;
+	msg.header = cpu_to_le16(*(u16 *)rx_buf_ptr);
+	rx_buf_ptr = rx_buf_ptr + sizeof(msg.header);
+	for (payload_index = 0; payload_index < pd_header_cnt_le(msg.header); payload_index++,
+	     rx_buf_ptr += sizeof(msg.payload[0]))
+		msg.payload[payload_index] = cpu_to_le32(*(u32 *)rx_buf_ptr);
+
+	/*
+	 * Read complete, clear RX status alert bit.
+	 * Clear overflow as well if set.
+	 */
+	ret = max_tcpci_write16(chip, TCPC_ALERT, status & TCPC_ALERT_RX_BUF_OVF ?
+				TCPC_ALERT_RX_STATUS | TCPC_ALERT_RX_BUF_OVF :
+				TCPC_ALERT_RX_STATUS);
+	if (ret < 0)
+		return;
+
+	tcpm_pd_receive(chip->port, &msg);
+}
+
+static int max_tcpci_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata, bool source, bool sink)
+{
+	struct max_tcpci_chip *chip = tdata_to_max_tcpci(tdata);
+	u8 buffer_source[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_SOURCE};
+	u8 buffer_sink[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_SINK};
+	u8 buffer_none[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_OFF};
+	struct i2c_client *i2c = chip->client;
+	int ret;
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = MAX_BUCK_BOOST_SID,
+			.flags = i2c->flags & I2C_M_TEN,
+			.len = 2,
+			.buf = source ? buffer_source : sink ? buffer_sink : buffer_none,
+		},
+	};
+
+	if (source && sink) {
+		dev_err(chip->dev, "Both source and sink set\n");
+		return -EINVAL;
+	}
+
+	ret = i2c_transfer(i2c->adapter, msgs, 1);
+
+	return  ret < 0 ? ret : 1;
+}
+
+static void process_power_status(struct max_tcpci_chip *chip)
+{
+	u8 pwr_status;
+	int ret;
+
+	ret = max_tcpci_read8(chip, TCPC_POWER_STATUS, &pwr_status);
+	if (ret < 0)
+		return;
+
+	if (pwr_status == 0xff)
+		max_tcpci_init_regs(chip);
+	else if (pwr_status & TCPC_POWER_STATUS_SOURCING_VBUS)
+		tcpm_sourcing_vbus(chip->port);
+	else
+		tcpm_vbus_change(chip->port);
+}
+
+static void max_tcpci_frs_sourcing_vbus(struct tcpci *tcpci, struct tcpci_data *tdata)
+{
+	/*
+	 * For Fast Role Swap case, Boost turns on autonomously without
+	 * AP intervention, but, needs AP to enable source mode explicitly
+	 * for AP to regain control.
+	 */
+	max_tcpci_set_vbus(tcpci, tdata, true, false);
+}
+
+static void process_tx(struct max_tcpci_chip *chip, u16 status)
+{
+	if (status & TCPC_ALERT_TX_SUCCESS)
+		tcpm_pd_transmit_complete(chip->port, TCPC_TX_SUCCESS);
+	else if (status & TCPC_ALERT_TX_DISCARDED)
+		tcpm_pd_transmit_complete(chip->port, TCPC_TX_DISCARDED);
+	else if (status & TCPC_ALERT_TX_FAILED)
+		tcpm_pd_transmit_complete(chip->port, TCPC_TX_FAILED);
+
+	/* Reinit regs as Hard reset sets them to default value */
+	if ((status & TCPC_ALERT_TX_SUCCESS) && (status & TCPC_ALERT_TX_FAILED))
+		max_tcpci_init_regs(chip);
+}
+
+/* Enable USB switches when partner is USB communications capable */
+static void max_tcpci_set_partner_usb_comm_capable(struct tcpci *tcpci, struct tcpci_data *data,
+						   bool capable)
+{
+	struct max_tcpci_chip *chip = tdata_to_max_tcpci(data);
+	int ret;
+
+	ret = max_tcpci_write8(chip, TCPC_VENDOR_USBSW_CTRL, capable ?
+			       TCPC_VENDOR_USBSW_CTRL_ENABLE_USB_DATA :
+			       TCPC_VENDOR_USBSW_CTRL_DISABLE_USB_DATA);
+
+	if (ret < 0)
+		dev_err(chip->dev, "Failed to enable USB switches");
+}
+
+static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status)
+{
+	u16 mask;
+	int ret;
+	u8 reg_status;
+
+	/*
+	 * Clear alert status for everything except RX_STATUS, which shouldn't
+	 * be cleared until we have successfully retrieved message.
+	 */
+	if (status & ~TCPC_ALERT_RX_STATUS) {
+		mask = status & TCPC_ALERT_RX_BUF_OVF ?
+			status & ~(TCPC_ALERT_RX_STATUS | TCPC_ALERT_RX_BUF_OVF) :
+			status & ~TCPC_ALERT_RX_STATUS;
+		ret = max_tcpci_write16(chip, TCPC_ALERT, mask);
+		if (ret < 0) {
+			dev_err(chip->dev, "ALERT clear failed\n");
+			return ret;
+		}
+	}
+
+	if (status & TCPC_ALERT_RX_BUF_OVF && !(status & TCPC_ALERT_RX_STATUS)) {
+		ret = max_tcpci_write16(chip, TCPC_ALERT, (TCPC_ALERT_RX_STATUS |
+							  TCPC_ALERT_RX_BUF_OVF));
+		if (ret < 0) {
+			dev_err(chip->dev, "ALERT clear failed\n");
+			return ret;
+		}
+	}
+
+	if (status & TCPC_ALERT_EXTND) {
+		ret = max_tcpci_read8(chip, TCPC_ALERT_EXTENDED, &reg_status);
+		if (ret < 0)
+			return ret;
+
+		ret = max_tcpci_write8(chip, TCPC_ALERT_EXTENDED, reg_status);
+		if (ret < 0)
+			return ret;
+
+		if (reg_status & TCPC_SINK_FAST_ROLE_SWAP) {
+			dev_info(chip->dev, "FRS Signal\n");
+			tcpm_sink_frs(chip->port);
+		}
+	}
+
+	if (status & TCPC_ALERT_EXTENDED_STATUS) {
+		ret = max_tcpci_read8(chip, TCPC_EXTENDED_STATUS, (u8 *)&reg_status);
+		if (ret >= 0 && (reg_status & TCPC_EXTENDED_STATUS_VSAFE0V))
+			tcpm_vbus_change(chip->port);
+	}
+
+	if (status & TCPC_ALERT_RX_STATUS)
+		process_rx(chip, status);
+
+	if (status & TCPC_ALERT_VBUS_DISCNCT)
+		tcpm_vbus_change(chip->port);
+
+	if (status & TCPC_ALERT_CC_STATUS)
+		tcpm_cc_change(chip->port);
+
+	if (status & TCPC_ALERT_POWER_STATUS)
+		process_power_status(chip);
+
+	if (status & TCPC_ALERT_RX_HARD_RST) {
+		tcpm_pd_hard_reset(chip->port);
+		max_tcpci_init_regs(chip);
+	}
+
+	if (status & TCPC_ALERT_TX_SUCCESS || status & TCPC_ALERT_TX_DISCARDED || status &
+	    TCPC_ALERT_TX_FAILED)
+		process_tx(chip, status);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t max_tcpci_irq(int irq, void *dev_id)
+{
+	struct max_tcpci_chip *chip = dev_id;
+	u16 status;
+	irqreturn_t irq_return = IRQ_HANDLED;
+	int ret;
+
+	if (!chip->port)
+		return IRQ_HANDLED;
+
+	ret = max_tcpci_read16(chip, TCPC_ALERT, &status);
+	if (ret < 0) {
+		dev_err(chip->dev, "ALERT read failed\n");
+		return ret;
+	}
+	while (status) {
+		irq_return = _max_tcpci_irq(chip, status);
+		/* Do not return if the ALERT is already set. */
+		ret = max_tcpci_read16(chip, TCPC_ALERT, &status);
+		if (ret < 0)
+			break;
+	}
+
+	return irq_return;
+}
+
+static irqreturn_t max_tcpci_isr(int irq, void *dev_id)
+{
+	struct max_tcpci_chip *chip = dev_id;
+
+	pm_wakeup_event(chip->dev, PD_ACTIVITY_TIMEOUT_MS);
+
+	if (!chip->port)
+		return IRQ_HANDLED;
+
+	return IRQ_WAKE_THREAD;
+}
+
+static int max_tcpci_init_alert(struct max_tcpci_chip *chip, struct i2c_client *client)
+{
+	int ret;
+
+	ret = devm_request_threaded_irq(chip->dev, client->irq, max_tcpci_isr, max_tcpci_irq,
+					(IRQF_TRIGGER_LOW | IRQF_ONESHOT), dev_name(chip->dev),
+					chip);
+
+	if (ret < 0)
+		return ret;
+
+	enable_irq_wake(client->irq);
+	return 0;
+}
+
+static int max_tcpci_start_toggling(struct tcpci *tcpci, struct tcpci_data *tdata,
+				    enum typec_cc_status cc)
+{
+	struct max_tcpci_chip *chip = tdata_to_max_tcpci(tdata);
+
+	max_tcpci_init_regs(chip);
+
+	return 0;
+}
+
+static int tcpci_init(struct tcpci *tcpci, struct tcpci_data *data)
+{
+	/*
+	 * Generic TCPCI overwrites the regs once this driver initializes
+	 * them. Prevent this by returning -1.
+	 */
+	return -1;
+}
+
+static int max_tcpci_probe(struct i2c_client *client, const struct i2c_device_id *i2c_id)
+{
+	int ret;
+	struct max_tcpci_chip *chip;
+	u8 power_status;
+
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->client = client;
+	chip->data.regmap = devm_regmap_init_i2c(client, &max_tcpci_regmap_config);
+	if (IS_ERR(chip->data.regmap)) {
+		dev_err(&client->dev, "Regmap init failed\n");
+		return PTR_ERR(chip->data.regmap);
+	}
+
+	chip->dev = &client->dev;
+	i2c_set_clientdata(client, chip);
+
+	ret = max_tcpci_read8(chip, TCPC_POWER_STATUS, &power_status);
+	if (ret < 0)
+		return ret;
+
+	/* Chip level tcpci callbacks */
+	chip->data.set_vbus = max_tcpci_set_vbus;
+	chip->data.start_drp_toggling = max_tcpci_start_toggling;
+	chip->data.TX_BUF_BYTE_x_hidden = true;
+	chip->data.init = tcpci_init;
+	chip->data.frs_sourcing_vbus = max_tcpci_frs_sourcing_vbus;
+	chip->data.auto_discharge_disconnect = true;
+	chip->data.vbus_vsafe0v = true;
+	chip->data.set_partner_usb_comm_capable = max_tcpci_set_partner_usb_comm_capable;
+
+	max_tcpci_init_regs(chip);
+	chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
+	if (IS_ERR(chip->tcpci)) {
+		dev_err(&client->dev, "TCPCI port registration failed\n");
+		return PTR_ERR(chip->tcpci);
+	}
+	chip->port = tcpci_get_tcpm_port(chip->tcpci);
+	ret = max_tcpci_init_alert(chip, client);
+	if (ret < 0)
+		goto unreg_port;
+
+	device_init_wakeup(chip->dev, true);
+	return 0;
+
+unreg_port:
+	tcpci_unregister_port(chip->tcpci);
+
+	return ret;
+}
+
+static void max_tcpci_remove(struct i2c_client *client)
+{
+	struct max_tcpci_chip *chip = i2c_get_clientdata(client);
+
+	if (!IS_ERR_OR_NULL(chip->tcpci))
+		tcpci_unregister_port(chip->tcpci);
+}
+
+static const struct i2c_device_id max_tcpci_id[] = {
+	{ "maxtcpc", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max_tcpci_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id max_tcpci_of_match[] = {
+	{ .compatible = "maxim,max33359", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, max_tcpci_of_match);
+#endif
+
+static struct i2c_driver max_tcpci_i2c_driver = {
+	.driver = {
+		.name = "maxtcpc",
+		.of_match_table = of_match_ptr(max_tcpci_of_match),
+	},
+	.probe = max_tcpci_probe,
+	.remove = max_tcpci_remove,
+	.id_table = max_tcpci_id,
+};
+module_i2c_driver(max_tcpci_i2c_driver);
+
+MODULE_AUTHOR("Badhri Jagan Sridharan <badhri@google.com>");
+MODULE_DESCRIPTION("Maxim TCPCI based USB Type-C Port Controller Interface Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/typec/tcpm/tcpci_mt6360.c b/drivers/usb/typec/tcpm/tcpci_mt6360.c
new file mode 100644
index 000000000..1b7c31278
--- /dev/null
+++ b/drivers/usb/typec/tcpm/tcpci_mt6360.c
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ *
+ * Author: ChiYuan Huang <cy_huang@richtek.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/usb/tcpci.h>
+#include <linux/usb/tcpm.h>
+
+#define MT6360_REG_PHYCTRL1	0x80
+#define MT6360_REG_PHYCTRL3	0x82
+#define MT6360_REG_PHYCTRL7	0x86
+#define MT6360_REG_VCONNCTRL1	0x8C
+#define MT6360_REG_MODECTRL2	0x8F
+#define MT6360_REG_SWRESET	0xA0
+#define MT6360_REG_DEBCTRL1	0xA1
+#define MT6360_REG_DRPCTRL1	0xA2
+#define MT6360_REG_DRPCTRL2	0xA3
+#define MT6360_REG_I2CTORST	0xBF
+#define MT6360_REG_PHYCTRL11	0xCA
+#define MT6360_REG_RXCTRL1	0xCE
+#define MT6360_REG_RXCTRL2	0xCF
+#define MT6360_REG_CTDCTRL2	0xEC
+
+/* MT6360_REG_VCONNCTRL1 */
+#define MT6360_VCONNCL_ENABLE	BIT(0)
+/* MT6360_REG_RXCTRL2 */
+#define MT6360_OPEN40M_ENABLE	BIT(7)
+/* MT6360_REG_CTDCTRL2 */
+#define MT6360_RPONESHOT_ENABLE	BIT(6)
+
+struct mt6360_tcpc_info {
+	struct tcpci_data tdata;
+	struct tcpci *tcpci;
+	struct device *dev;
+	int irq;
+};
+
+static inline int mt6360_tcpc_read16(struct regmap *regmap,
+				     unsigned int reg, u16 *val)
+{
+	return regmap_raw_read(regmap, reg, val, sizeof(u16));
+}
+
+static inline int mt6360_tcpc_write16(struct regmap *regmap,
+				      unsigned int reg, u16 val)
+{
+	return regmap_raw_write(regmap, reg, &val, sizeof(u16));
+}
+
+static int mt6360_tcpc_init(struct tcpci *tcpci, struct tcpci_data *tdata)
+{
+	struct regmap *regmap = tdata->regmap;
+	int ret;
+
+	ret = regmap_write(regmap, MT6360_REG_SWRESET, 0x01);
+	if (ret)
+		return ret;
+
+	/* after reset command, wait 1~2ms to wait IC action */
+	usleep_range(1000, 2000);
+
+	/* write all alert to masked */
+	ret = mt6360_tcpc_write16(regmap, TCPC_ALERT_MASK, 0);
+	if (ret)
+		return ret;
+
+	/* config I2C timeout reset enable , and timeout to 200ms */
+	ret = regmap_write(regmap, MT6360_REG_I2CTORST, 0x8F);
+	if (ret)
+		return ret;
+
+	/* config CC Detect Debounce : 26.7*val us */
+	ret = regmap_write(regmap, MT6360_REG_DEBCTRL1, 0x10);
+	if (ret)
+		return ret;
+
+	/* DRP Toggle Cycle : 51.2 + 6.4*val ms */
+	ret = regmap_write(regmap, MT6360_REG_DRPCTRL1, 4);
+	if (ret)
+		return ret;
+
+	/* DRP Duyt Ctrl : dcSRC: /1024 */
+	ret = mt6360_tcpc_write16(regmap, MT6360_REG_DRPCTRL2, 330);
+	if (ret)
+		return ret;
+
+	/* Enable VCONN Current Limit function */
+	ret = regmap_update_bits(regmap, MT6360_REG_VCONNCTRL1, MT6360_VCONNCL_ENABLE,
+				 MT6360_VCONNCL_ENABLE);
+	if (ret)
+		return ret;
+
+	/* Enable cc open 40ms when pmic send vsysuv signal */
+	ret = regmap_update_bits(regmap, MT6360_REG_RXCTRL2, MT6360_OPEN40M_ENABLE,
+				 MT6360_OPEN40M_ENABLE);
+	if (ret)
+		return ret;
+
+	/* Enable Rpdet oneshot detection */
+	ret = regmap_update_bits(regmap, MT6360_REG_CTDCTRL2, MT6360_RPONESHOT_ENABLE,
+				 MT6360_RPONESHOT_ENABLE);
+	if (ret)
+		return ret;
+
+	/* BMC PHY */
+	ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL1, 0x3A70);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(regmap, MT6360_REG_PHYCTRL3,  0x82);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(regmap, MT6360_REG_PHYCTRL7, 0x36);
+	if (ret)
+		return ret;
+
+	ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL11, 0x3C60);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(regmap, MT6360_REG_RXCTRL1, 0xE8);
+	if (ret)
+		return ret;
+
+	/* Set shipping mode off, AUTOIDLE on */
+	return regmap_write(regmap, MT6360_REG_MODECTRL2, 0x7A);
+}
+
+static irqreturn_t mt6360_irq(int irq, void *dev_id)
+{
+	struct mt6360_tcpc_info *mti = dev_id;
+
+	return tcpci_irq(mti->tcpci);
+}
+
+static int mt6360_tcpc_probe(struct platform_device *pdev)
+{
+	struct mt6360_tcpc_info *mti;
+	int ret;
+
+	mti = devm_kzalloc(&pdev->dev, sizeof(*mti), GFP_KERNEL);
+	if (!mti)
+		return -ENOMEM;
+
+	mti->dev = &pdev->dev;
+
+	mti->tdata.regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!mti->tdata.regmap) {
+		dev_err(&pdev->dev, "Failed to get parent regmap\n");
+		return -ENODEV;
+	}
+
+	mti->irq = platform_get_irq_byname(pdev, "PD_IRQB");
+	if (mti->irq < 0)
+		return mti->irq;
+
+	mti->tdata.init = mt6360_tcpc_init;
+	mti->tcpci = tcpci_register_port(&pdev->dev, &mti->tdata);
+	if (IS_ERR(mti->tcpci)) {
+		dev_err(&pdev->dev, "Failed to register tcpci port\n");
+		return PTR_ERR(mti->tcpci);
+	}
+
+	ret = devm_request_threaded_irq(mti->dev, mti->irq, NULL, mt6360_irq, IRQF_ONESHOT,
+					dev_name(&pdev->dev), mti);
+	if (ret) {
+		dev_err(mti->dev, "Failed to register irq\n");
+		tcpci_unregister_port(mti->tcpci);
+		return ret;
+	}
+
+	device_init_wakeup(&pdev->dev, true);
+	platform_set_drvdata(pdev, mti);
+
+	return 0;
+}
+
+static int mt6360_tcpc_remove(struct platform_device *pdev)
+{
+	struct mt6360_tcpc_info *mti = platform_get_drvdata(pdev);
+
+	disable_irq(mti->irq);
+	tcpci_unregister_port(mti->tcpci);
+	return 0;
+}
+
+static int __maybe_unused mt6360_tcpc_suspend(struct device *dev)
+{
+	struct mt6360_tcpc_info *mti = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(mti->irq);
+
+	return 0;
+}
+
+static int __maybe_unused mt6360_tcpc_resume(struct device *dev)
+{
+	struct mt6360_tcpc_info *mti = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(mti->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mt6360_tcpc_pm_ops, mt6360_tcpc_suspend, mt6360_tcpc_resume);
+
+static const struct of_device_id __maybe_unused mt6360_tcpc_of_id[] = {
+	{ .compatible = "mediatek,mt6360-tcpc", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mt6360_tcpc_of_id);
+
+static struct platform_driver mt6360_tcpc_driver = {
+	.driver = {
+		.name = "mt6360-tcpc",
+		.pm = &mt6360_tcpc_pm_ops,
+		.of_match_table = mt6360_tcpc_of_id,
+	},
+	.probe = mt6360_tcpc_probe,
+	.remove = mt6360_tcpc_remove,
+};
+module_platform_driver(mt6360_tcpc_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("MT6360 USB Type-C Port Controller Interface Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/typec/tcpm/tcpci_mt6370.c b/drivers/usb/typec/tcpm/tcpci_mt6370.c
new file mode 100644
index 000000000..c5bb201a5
--- /dev/null
+++ b/drivers/usb/typec/tcpm/tcpci_mt6370.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Richtek Technology Corp.
+ *
+ * Author: ChiYuan Huang <cy_huang@richtek.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeup.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/tcpci.h>
+#include <linux/usb/tcpm.h>
+
+#define MT6370_REG_SYSCTRL8	0x9B
+
+#define MT6370_AUTOIDLE_MASK	BIT(3)
+
+#define MT6370_VENDOR_ID	0x29CF
+#define MT6370_TCPC_DID_A	0x2170
+
+struct mt6370_priv {
+	struct device *dev;
+	struct regulator *vbus;
+	struct tcpci *tcpci;
+	struct tcpci_data tcpci_data;
+};
+
+static const struct reg_sequence mt6370_reg_init[] = {
+	REG_SEQ(0xA0, 0x1, 1000),
+	REG_SEQ(0x81, 0x38, 0),
+	REG_SEQ(0x82, 0x82, 0),
+	REG_SEQ(0xBA, 0xFC, 0),
+	REG_SEQ(0xBB, 0x50, 0),
+	REG_SEQ(0x9E, 0x8F, 0),
+	REG_SEQ(0xA1, 0x5, 0),
+	REG_SEQ(0xA2, 0x4, 0),
+	REG_SEQ(0xA3, 0x4A, 0),
+	REG_SEQ(0xA4, 0x01, 0),
+	REG_SEQ(0x95, 0x01, 0),
+	REG_SEQ(0x80, 0x71, 0),
+	REG_SEQ(0x9B, 0x3A, 1000),
+};
+
+static int mt6370_tcpc_init(struct tcpci *tcpci, struct tcpci_data *data)
+{
+	u16 did;
+	int ret;
+
+	ret = regmap_register_patch(data->regmap, mt6370_reg_init,
+				    ARRAY_SIZE(mt6370_reg_init));
+	if (ret)
+		return ret;
+
+	ret = regmap_raw_read(data->regmap, TCPC_BCD_DEV, &did, sizeof(u16));
+	if (ret)
+		return ret;
+
+	if (did == MT6370_TCPC_DID_A)
+		return regmap_write(data->regmap, TCPC_FAULT_CTRL, 0x80);
+
+	return 0;
+}
+
+static int mt6370_tcpc_set_vconn(struct tcpci *tcpci, struct tcpci_data *data,
+				 bool enable)
+{
+	return regmap_update_bits(data->regmap, MT6370_REG_SYSCTRL8,
+				  MT6370_AUTOIDLE_MASK,
+				  enable ? 0 : MT6370_AUTOIDLE_MASK);
+}
+
+static int mt6370_tcpc_set_vbus(struct tcpci *tcpci, struct tcpci_data *data,
+				bool source, bool sink)
+{
+	struct mt6370_priv *priv = container_of(data, struct mt6370_priv,
+						tcpci_data);
+	int ret;
+
+	ret = regulator_is_enabled(priv->vbus);
+	if (ret < 0)
+		return ret;
+
+	if (ret && !source)
+		return regulator_disable(priv->vbus);
+
+	if (!ret && source)
+		return regulator_enable(priv->vbus);
+
+	return 0;
+}
+
+static irqreturn_t mt6370_irq_handler(int irq, void *dev_id)
+{
+	struct mt6370_priv *priv = dev_id;
+
+	return tcpci_irq(priv->tcpci);
+}
+
+static int mt6370_check_vendor_info(struct mt6370_priv *priv)
+{
+	struct regmap *regmap = priv->tcpci_data.regmap;
+	u16 vid;
+	int ret;
+
+	ret = regmap_raw_read(regmap, TCPC_VENDOR_ID, &vid, sizeof(u16));
+	if (ret)
+		return ret;
+
+	if (vid != MT6370_VENDOR_ID)
+		return dev_err_probe(priv->dev, -ENODEV,
+				     "Vendor ID not correct 0x%02x\n", vid);
+
+	return 0;
+}
+
+static void mt6370_unregister_tcpci_port(void *tcpci)
+{
+	tcpci_unregister_port(tcpci);
+}
+
+static int mt6370_tcpc_probe(struct platform_device *pdev)
+{
+	struct mt6370_priv *priv;
+	struct device *dev = &pdev->dev;
+	int irq, ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+
+	priv->tcpci_data.regmap = dev_get_regmap(dev->parent, NULL);
+	if (!priv->tcpci_data.regmap)
+		return dev_err_probe(dev, -ENODEV, "Failed to init regmap\n");
+
+	ret = mt6370_check_vendor_info(priv);
+	if (ret)
+		return ret;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return dev_err_probe(dev, irq, "Failed to get irq\n");
+
+	/* Assign TCPCI feature and ops */
+	priv->tcpci_data.auto_discharge_disconnect = 1;
+	priv->tcpci_data.init = mt6370_tcpc_init;
+	priv->tcpci_data.set_vconn = mt6370_tcpc_set_vconn;
+
+	priv->vbus = devm_regulator_get_optional(dev, "vbus");
+	if (!IS_ERR(priv->vbus))
+		priv->tcpci_data.set_vbus = mt6370_tcpc_set_vbus;
+
+	priv->tcpci = tcpci_register_port(dev, &priv->tcpci_data);
+	if (IS_ERR(priv->tcpci))
+		return dev_err_probe(dev, PTR_ERR(priv->tcpci),
+				     "Failed to register tcpci port\n");
+
+	ret = devm_add_action_or_reset(dev, mt6370_unregister_tcpci_port, priv->tcpci);
+	if (ret)
+		return ret;
+
+	ret = devm_request_threaded_irq(dev, irq, NULL, mt6370_irq_handler,
+					IRQF_ONESHOT, dev_name(dev), priv);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to allocate irq\n");
+
+	device_init_wakeup(dev, true);
+	dev_pm_set_wake_irq(dev, irq);
+
+	return 0;
+}
+
+static int mt6370_tcpc_remove(struct platform_device *pdev)
+{
+	dev_pm_clear_wake_irq(&pdev->dev);
+	device_init_wakeup(&pdev->dev, false);
+
+	return 0;
+}
+
+static const struct of_device_id mt6370_tcpc_devid_table[] = {
+	{ .compatible = "mediatek,mt6370-tcpc" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mt6370_tcpc_devid_table);
+
+static struct platform_driver mt6370_tcpc_driver = {
+	.driver = {
+		.name = "mt6370-tcpc",
+		.of_match_table = mt6370_tcpc_devid_table,
+	},
+	.probe = mt6370_tcpc_probe,
+	.remove = mt6370_tcpc_remove,
+};
+module_platform_driver(mt6370_tcpc_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("MT6370 USB Type-C Port Controller Interface Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
new file mode 100644
index 000000000..7b217c712
--- /dev/null
+++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, Richtek Technology Corporation
+ *
+ * Richtek RT1711H Type-C Chip Driver
+ */
+
+#include <linux/bits.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/gpio/consumer.h>
+#include <linux/usb/tcpci.h>
+#include <linux/usb/tcpm.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#define RT1711H_VID		0x29CF
+#define RT1711H_PID		0x1711
+#define RT1711H_DID		0x2171
+#define RT1715_DID		0x2173
+
+#define RT1711H_PHYCTRL1	0x80
+#define RT1711H_PHYCTRL2	0x81
+
+#define RT1711H_RTCTRL4		0x93
+/* rx threshold of rd/rp: 1b0 for level 0.4V/0.7V, 1b1 for 0.35V/0.75V */
+#define RT1711H_BMCIO_RXDZSEL	BIT(0)
+
+#define RT1711H_RTCTRL8		0x9B
+/* Autoidle timeout = (tout * 2 + 1) * 6.4ms */
+#define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \
+			    (((ck300) << 7) | ((ship_off) << 5) | \
+			    ((auto_idle) << 3) | ((tout) & 0x07))
+#define RT1711H_AUTOIDLEEN	BIT(3)
+#define RT1711H_ENEXTMSG	BIT(4)
+
+#define RT1711H_RTCTRL11	0x9E
+
+/* I2C timeout = (tout + 1) * 12.5ms */
+#define RT1711H_RTCTRL11_SET(en, tout) \
+			     (((en) << 7) | ((tout) & 0x0F))
+
+#define RT1711H_RTCTRL13	0xA0
+#define RT1711H_RTCTRL14	0xA1
+#define RT1711H_RTCTRL15	0xA2
+#define RT1711H_RTCTRL16	0xA3
+
+#define RT1711H_RTCTRL18	0xAF
+/* 1b0 as fixed rx threshold of rd/rp 0.55V, 1b1 depends on RTCRTL4[0] */
+#define BMCIO_RXDZEN	BIT(0)
+
+struct rt1711h_chip {
+	struct tcpci_data data;
+	struct tcpci *tcpci;
+	struct device *dev;
+	struct regulator *vbus;
+	bool src_en;
+	u16 did;
+};
+
+static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
+{
+	return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u16));
+}
+
+static int rt1711h_write16(struct rt1711h_chip *chip, unsigned int reg, u16 val)
+{
+	return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u16));
+}
+
+static int rt1711h_read8(struct rt1711h_chip *chip, unsigned int reg, u8 *val)
+{
+	return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u8));
+}
+
+static int rt1711h_write8(struct rt1711h_chip *chip, unsigned int reg, u8 val)
+{
+	return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u8));
+}
+
+static const struct regmap_config rt1711h_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = 0xFF, /* 0x80 .. 0xFF are vendor defined */
+};
+
+static struct rt1711h_chip *tdata_to_rt1711h(struct tcpci_data *tdata)
+{
+	return container_of(tdata, struct rt1711h_chip, data);
+}
+
+static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
+{
+	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
+	struct regmap *regmap = chip->data.regmap;
+	int ret;
+
+	/* CK 300K from 320K, shipping off, auto_idle enable, tout = 32ms */
+	ret = rt1711h_write8(chip, RT1711H_RTCTRL8,
+			     RT1711H_RTCTRL8_SET(0, 1, 1, 2));
+	if (ret < 0)
+		return ret;
+
+	/* Enable PD30 extended message for RT1715 */
+	if (chip->did == RT1715_DID) {
+		ret = regmap_update_bits(regmap, RT1711H_RTCTRL8,
+					 RT1711H_ENEXTMSG, RT1711H_ENEXTMSG);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* I2C reset : (val + 1) * 12.5ms */
+	ret = rt1711h_write8(chip, RT1711H_RTCTRL11,
+			     RT1711H_RTCTRL11_SET(1, 0x0F));
+	if (ret < 0)
+		return ret;
+
+	/* tTCPCfilter : (26.7 * val) us */
+	ret = rt1711h_write8(chip, RT1711H_RTCTRL14, 0x0F);
+	if (ret < 0)
+		return ret;
+
+	/*  tDRP : (51.2 + 6.4 * val) ms */
+	ret = rt1711h_write8(chip, RT1711H_RTCTRL15, 0x04);
+	if (ret < 0)
+		return ret;
+
+	/* dcSRC.DRP : 33% */
+	ret = rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+	if (ret < 0)
+		return ret;
+
+	/* Enable phy discard retry, retry count 7, rx filter deglitch 100 us */
+	ret = rt1711h_write8(chip, RT1711H_PHYCTRL1, 0xF1);
+	if (ret < 0)
+		return ret;
+
+	/* Decrease wait time of BMC-encoded 1 bit from 2.67us to 2.55us */
+	/* wait time : (val * .4167) us */
+	return rt1711h_write8(chip, RT1711H_PHYCTRL2, 62);
+}
+
+static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
+			    bool src, bool snk)
+{
+	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
+	int ret;
+
+	if (chip->src_en == src)
+		return 0;
+
+	if (src)
+		ret = regulator_enable(chip->vbus);
+	else
+		ret = regulator_disable(chip->vbus);
+
+	if (!ret)
+		chip->src_en = src;
+	return ret;
+}
+
+static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
+			     bool enable)
+{
+	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
+
+	return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL8,
+				  RT1711H_AUTOIDLEEN, enable ? 0 : RT1711H_AUTOIDLEEN);
+}
+
+/*
+ * Selects the CC PHY noise filter voltage level according to the remote current
+ * CC voltage level.
+ *
+ * @status: The port's current cc status read from IC
+ * Return 0 if writes succeed; failure code otherwise
+ */
+static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status)
+{
+	int ret, cc1, cc2;
+	u8 role = 0;
+	u32 rxdz_en, rxdz_sel;
+
+	ret = rt1711h_read8(chip, TCPC_ROLE_CTRL, &role);
+	if (ret < 0)
+		return ret;
+
+	cc1 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC1_SHIFT) &
+				TCPC_CC_STATUS_CC1_MASK,
+				status & TCPC_CC_STATUS_TERM ||
+				tcpc_presenting_rd(role, CC1));
+	cc2 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC2_SHIFT) &
+				TCPC_CC_STATUS_CC2_MASK,
+				status & TCPC_CC_STATUS_TERM ||
+				tcpc_presenting_rd(role, CC2));
+
+	if ((cc1 >= TYPEC_CC_RP_1_5 && cc2 < TYPEC_CC_RP_DEF) ||
+	    (cc2 >= TYPEC_CC_RP_1_5 && cc1 < TYPEC_CC_RP_DEF)) {
+		rxdz_en = BMCIO_RXDZEN;
+		if (chip->did == RT1715_DID)
+			rxdz_sel = RT1711H_BMCIO_RXDZSEL;
+		else
+			rxdz_sel = 0;
+	} else {
+		rxdz_en = 0;
+		rxdz_sel = RT1711H_BMCIO_RXDZSEL;
+	}
+
+	ret = regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL18,
+				 BMCIO_RXDZEN, rxdz_en);
+	if (ret < 0)
+		return ret;
+
+	return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL4,
+				  RT1711H_BMCIO_RXDZSEL, rxdz_sel);
+}
+
+static int rt1711h_start_drp_toggling(struct tcpci *tcpci,
+				      struct tcpci_data *tdata,
+				      enum typec_cc_status cc)
+{
+	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
+	int ret;
+	unsigned int reg = 0;
+
+	switch (cc) {
+	default:
+	case TYPEC_CC_RP_DEF:
+		reg |= (TCPC_ROLE_CTRL_RP_VAL_DEF <<
+			TCPC_ROLE_CTRL_RP_VAL_SHIFT);
+		break;
+	case TYPEC_CC_RP_1_5:
+		reg |= (TCPC_ROLE_CTRL_RP_VAL_1_5 <<
+			TCPC_ROLE_CTRL_RP_VAL_SHIFT);
+		break;
+	case TYPEC_CC_RP_3_0:
+		reg |= (TCPC_ROLE_CTRL_RP_VAL_3_0 <<
+			TCPC_ROLE_CTRL_RP_VAL_SHIFT);
+		break;
+	}
+
+	if (cc == TYPEC_CC_RD)
+		reg |= (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT) |
+			   (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT);
+	else
+		reg |= (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT) |
+			   (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT);
+
+	ret = rt1711h_write8(chip, TCPC_ROLE_CTRL, reg);
+	if (ret < 0)
+		return ret;
+	usleep_range(500, 1000);
+
+	return 0;
+}
+
+static irqreturn_t rt1711h_irq(int irq, void *dev_id)
+{
+	int ret;
+	u16 alert;
+	u8 status;
+	struct rt1711h_chip *chip = dev_id;
+
+	if (!chip->tcpci)
+		return IRQ_HANDLED;
+
+	ret = rt1711h_read16(chip, TCPC_ALERT, &alert);
+	if (ret < 0)
+		goto out;
+
+	if (alert & TCPC_ALERT_CC_STATUS) {
+		ret = rt1711h_read8(chip, TCPC_CC_STATUS, &status);
+		if (ret < 0)
+			goto out;
+		/* Clear cc change event triggered by starting toggling */
+		if (status & TCPC_CC_STATUS_TOGGLING)
+			rt1711h_write8(chip, TCPC_ALERT, TCPC_ALERT_CC_STATUS);
+		else
+			rt1711h_init_cc_params(chip, status);
+	}
+
+out:
+	return tcpci_irq(chip->tcpci);
+}
+
+static int rt1711h_sw_reset(struct rt1711h_chip *chip)
+{
+	int ret;
+
+	ret = rt1711h_write8(chip, RT1711H_RTCTRL13, 0x01);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(1000, 2000);
+	return 0;
+}
+
+static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *chip)
+{
+	int ret;
+
+	ret = i2c_smbus_read_word_data(i2c, TCPC_VENDOR_ID);
+	if (ret < 0)
+		return ret;
+	if (ret != RT1711H_VID) {
+		dev_err(&i2c->dev, "vid is not correct, 0x%04x\n", ret);
+		return -ENODEV;
+	}
+	ret = i2c_smbus_read_word_data(i2c, TCPC_PRODUCT_ID);
+	if (ret < 0)
+		return ret;
+	if (ret != RT1711H_PID) {
+		dev_err(&i2c->dev, "pid is not correct, 0x%04x\n", ret);
+		return -ENODEV;
+	}
+	ret = i2c_smbus_read_word_data(i2c, TCPC_BCD_DEV);
+	if (ret < 0)
+		return ret;
+	if (ret != chip->did) {
+		dev_err(&i2c->dev, "did is not correct, 0x%04x\n", ret);
+		return -ENODEV;
+	}
+	dev_dbg(&i2c->dev, "did is 0x%04x\n", ret);
+	return ret;
+}
+
+static int rt1711h_probe(struct i2c_client *client,
+			 const struct i2c_device_id *i2c_id)
+{
+	int ret;
+	struct rt1711h_chip *chip;
+
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->did = (size_t)device_get_match_data(&client->dev);
+
+	ret = rt1711h_check_revision(client, chip);
+	if (ret < 0) {
+		dev_err(&client->dev, "check vid/pid fail\n");
+		return ret;
+	}
+
+	chip->data.regmap = devm_regmap_init_i2c(client,
+						 &rt1711h_regmap_config);
+	if (IS_ERR(chip->data.regmap))
+		return PTR_ERR(chip->data.regmap);
+
+	chip->dev = &client->dev;
+	i2c_set_clientdata(client, chip);
+
+	ret = rt1711h_sw_reset(chip);
+	if (ret < 0)
+		return ret;
+
+	/* Disable chip interrupts before requesting irq */
+	ret = rt1711h_write16(chip, TCPC_ALERT_MASK, 0);
+	if (ret < 0)
+		return ret;
+
+	chip->vbus = devm_regulator_get(&client->dev, "vbus");
+	if (IS_ERR(chip->vbus))
+		return PTR_ERR(chip->vbus);
+
+	chip->data.init = rt1711h_init;
+	chip->data.set_vbus = rt1711h_set_vbus;
+	chip->data.set_vconn = rt1711h_set_vconn;
+	chip->data.start_drp_toggling = rt1711h_start_drp_toggling;
+	chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
+	if (IS_ERR_OR_NULL(chip->tcpci))
+		return PTR_ERR(chip->tcpci);
+
+	ret = devm_request_threaded_irq(chip->dev, client->irq, NULL,
+					rt1711h_irq,
+					IRQF_ONESHOT | IRQF_TRIGGER_LOW,
+					dev_name(chip->dev), chip);
+	if (ret < 0)
+		return ret;
+	enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static void rt1711h_remove(struct i2c_client *client)
+{
+	struct rt1711h_chip *chip = i2c_get_clientdata(client);
+
+	tcpci_unregister_port(chip->tcpci);
+}
+
+static const struct i2c_device_id rt1711h_id[] = {
+	{ "rt1711h", 0 },
+	{ "rt1715", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rt1711h_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id rt1711h_of_match[] = {
+	{ .compatible = "richtek,rt1711h", .data = (void *)RT1711H_DID },
+	{ .compatible = "richtek,rt1715", .data = (void *)RT1715_DID },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rt1711h_of_match);
+#endif
+
+static struct i2c_driver rt1711h_i2c_driver = {
+	.driver = {
+		.name = "rt1711h",
+		.of_match_table = of_match_ptr(rt1711h_of_match),
+	},
+	.probe = rt1711h_probe,
+	.remove = rt1711h_remove,
+	.id_table = rt1711h_id,
+};
+module_i2c_driver(rt1711h_i2c_driver);
+
+MODULE_AUTHOR("ShuFan Lee <shufan_lee@richtek.com>");
+MODULE_DESCRIPTION("RT1711H USB Type-C Port Controller Interface Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
new file mode 100644
index 000000000..bf615dc80
--- /dev/null
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -0,0 +1,6669 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015-2017 Google, Inc
+ *
+ * USB Power Delivery protocol stack.
+ */
+
+#include <linux/completion.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/hrtimer.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/power_supply.h>
+#include <linux/proc_fs.h>
+#include <linux/property.h>
+#include <linux/sched/clock.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/usb/pd.h>
+#include <linux/usb/pd_ado.h>
+#include <linux/usb/pd_bdo.h>
+#include <linux/usb/pd_ext_sdb.h>
+#include <linux/usb/pd_vdo.h>
+#include <linux/usb/role.h>
+#include <linux/usb/tcpm.h>
+#include <linux/usb/typec_altmode.h>
+
+#include <uapi/linux/sched/types.h>
+
+#define FOREACH_STATE(S)			\
+	S(INVALID_STATE),			\
+	S(TOGGLING),			\
+	S(SRC_UNATTACHED),			\
+	S(SRC_ATTACH_WAIT),			\
+	S(SRC_ATTACHED),			\
+	S(SRC_STARTUP),				\
+	S(SRC_SEND_CAPABILITIES),		\
+	S(SRC_SEND_CAPABILITIES_TIMEOUT),	\
+	S(SRC_NEGOTIATE_CAPABILITIES),		\
+	S(SRC_TRANSITION_SUPPLY),		\
+	S(SRC_READY),				\
+	S(SRC_WAIT_NEW_CAPABILITIES),		\
+						\
+	S(SNK_UNATTACHED),			\
+	S(SNK_ATTACH_WAIT),			\
+	S(SNK_DEBOUNCED),			\
+	S(SNK_ATTACHED),			\
+	S(SNK_STARTUP),				\
+	S(SNK_DISCOVERY),			\
+	S(SNK_DISCOVERY_DEBOUNCE),		\
+	S(SNK_DISCOVERY_DEBOUNCE_DONE),		\
+	S(SNK_WAIT_CAPABILITIES),		\
+	S(SNK_NEGOTIATE_CAPABILITIES),		\
+	S(SNK_NEGOTIATE_PPS_CAPABILITIES),	\
+	S(SNK_TRANSITION_SINK),			\
+	S(SNK_TRANSITION_SINK_VBUS),		\
+	S(SNK_READY),				\
+						\
+	S(ACC_UNATTACHED),			\
+	S(DEBUG_ACC_ATTACHED),			\
+	S(AUDIO_ACC_ATTACHED),			\
+	S(AUDIO_ACC_DEBOUNCE),			\
+						\
+	S(HARD_RESET_SEND),			\
+	S(HARD_RESET_START),			\
+	S(SRC_HARD_RESET_VBUS_OFF),		\
+	S(SRC_HARD_RESET_VBUS_ON),		\
+	S(SNK_HARD_RESET_SINK_OFF),		\
+	S(SNK_HARD_RESET_WAIT_VBUS),		\
+	S(SNK_HARD_RESET_SINK_ON),		\
+						\
+	S(SOFT_RESET),				\
+	S(SRC_SOFT_RESET_WAIT_SNK_TX),		\
+	S(SNK_SOFT_RESET),			\
+	S(SOFT_RESET_SEND),			\
+						\
+	S(DR_SWAP_ACCEPT),			\
+	S(DR_SWAP_SEND),			\
+	S(DR_SWAP_SEND_TIMEOUT),		\
+	S(DR_SWAP_CANCEL),			\
+	S(DR_SWAP_CHANGE_DR),			\
+						\
+	S(PR_SWAP_ACCEPT),			\
+	S(PR_SWAP_SEND),			\
+	S(PR_SWAP_SEND_TIMEOUT),		\
+	S(PR_SWAP_CANCEL),			\
+	S(PR_SWAP_START),			\
+	S(PR_SWAP_SRC_SNK_TRANSITION_OFF),	\
+	S(PR_SWAP_SRC_SNK_SOURCE_OFF),		\
+	S(PR_SWAP_SRC_SNK_SOURCE_OFF_CC_DEBOUNCED), \
+	S(PR_SWAP_SRC_SNK_SINK_ON),		\
+	S(PR_SWAP_SNK_SRC_SINK_OFF),		\
+	S(PR_SWAP_SNK_SRC_SOURCE_ON),		\
+	S(PR_SWAP_SNK_SRC_SOURCE_ON_VBUS_RAMPED_UP),    \
+						\
+	S(VCONN_SWAP_ACCEPT),			\
+	S(VCONN_SWAP_SEND),			\
+	S(VCONN_SWAP_SEND_TIMEOUT),		\
+	S(VCONN_SWAP_CANCEL),			\
+	S(VCONN_SWAP_START),			\
+	S(VCONN_SWAP_WAIT_FOR_VCONN),		\
+	S(VCONN_SWAP_TURN_ON_VCONN),		\
+	S(VCONN_SWAP_TURN_OFF_VCONN),		\
+						\
+	S(FR_SWAP_SEND),			\
+	S(FR_SWAP_SEND_TIMEOUT),		\
+	S(FR_SWAP_SNK_SRC_TRANSITION_TO_OFF),			\
+	S(FR_SWAP_SNK_SRC_NEW_SINK_READY),		\
+	S(FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED),	\
+	S(FR_SWAP_CANCEL),			\
+						\
+	S(SNK_TRY),				\
+	S(SNK_TRY_WAIT),			\
+	S(SNK_TRY_WAIT_DEBOUNCE),               \
+	S(SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS),    \
+	S(SRC_TRYWAIT),				\
+	S(SRC_TRYWAIT_DEBOUNCE),		\
+	S(SRC_TRYWAIT_UNATTACHED),		\
+						\
+	S(SRC_TRY),				\
+	S(SRC_TRY_WAIT),                        \
+	S(SRC_TRY_DEBOUNCE),			\
+	S(SNK_TRYWAIT),				\
+	S(SNK_TRYWAIT_DEBOUNCE),		\
+	S(SNK_TRYWAIT_VBUS),			\
+	S(BIST_RX),				\
+						\
+	S(GET_STATUS_SEND),			\
+	S(GET_STATUS_SEND_TIMEOUT),		\
+	S(GET_PPS_STATUS_SEND),			\
+	S(GET_PPS_STATUS_SEND_TIMEOUT),		\
+						\
+	S(GET_SINK_CAP),			\
+	S(GET_SINK_CAP_TIMEOUT),		\
+						\
+	S(ERROR_RECOVERY),			\
+	S(PORT_RESET),				\
+	S(PORT_RESET_WAIT_OFF),			\
+						\
+	S(AMS_START),				\
+	S(CHUNK_NOT_SUPP)
+
+#define FOREACH_AMS(S)				\
+	S(NONE_AMS),				\
+	S(POWER_NEGOTIATION),			\
+	S(GOTOMIN),				\
+	S(SOFT_RESET_AMS),			\
+	S(HARD_RESET),				\
+	S(CABLE_RESET),				\
+	S(GET_SOURCE_CAPABILITIES),		\
+	S(GET_SINK_CAPABILITIES),		\
+	S(POWER_ROLE_SWAP),			\
+	S(FAST_ROLE_SWAP),			\
+	S(DATA_ROLE_SWAP),			\
+	S(VCONN_SWAP),				\
+	S(SOURCE_ALERT),			\
+	S(GETTING_SOURCE_EXTENDED_CAPABILITIES),\
+	S(GETTING_SOURCE_SINK_STATUS),		\
+	S(GETTING_BATTERY_CAPABILITIES),	\
+	S(GETTING_BATTERY_STATUS),		\
+	S(GETTING_MANUFACTURER_INFORMATION),	\
+	S(SECURITY),				\
+	S(FIRMWARE_UPDATE),			\
+	S(DISCOVER_IDENTITY),			\
+	S(SOURCE_STARTUP_CABLE_PLUG_DISCOVER_IDENTITY),	\
+	S(DISCOVER_SVIDS),			\
+	S(DISCOVER_MODES),			\
+	S(DFP_TO_UFP_ENTER_MODE),		\
+	S(DFP_TO_UFP_EXIT_MODE),		\
+	S(DFP_TO_CABLE_PLUG_ENTER_MODE),	\
+	S(DFP_TO_CABLE_PLUG_EXIT_MODE),		\
+	S(ATTENTION),				\
+	S(BIST),				\
+	S(UNSTRUCTURED_VDMS),			\
+	S(STRUCTURED_VDMS),			\
+	S(COUNTRY_INFO),			\
+	S(COUNTRY_CODES)
+
+#define GENERATE_ENUM(e)	e
+#define GENERATE_STRING(s)	#s
+
+enum tcpm_state {
+	FOREACH_STATE(GENERATE_ENUM)
+};
+
+static const char * const tcpm_states[] = {
+	FOREACH_STATE(GENERATE_STRING)
+};
+
+enum tcpm_ams {
+	FOREACH_AMS(GENERATE_ENUM)
+};
+
+static const char * const tcpm_ams_str[] = {
+	FOREACH_AMS(GENERATE_STRING)
+};
+
+enum vdm_states {
+	VDM_STATE_ERR_BUSY = -3,
+	VDM_STATE_ERR_SEND = -2,
+	VDM_STATE_ERR_TMOUT = -1,
+	VDM_STATE_DONE = 0,
+	/* Anything >0 represents an active state */
+	VDM_STATE_READY = 1,
+	VDM_STATE_BUSY = 2,
+	VDM_STATE_WAIT_RSP_BUSY = 3,
+	VDM_STATE_SEND_MESSAGE = 4,
+};
+
+enum pd_msg_request {
+	PD_MSG_NONE = 0,
+	PD_MSG_CTRL_REJECT,
+	PD_MSG_CTRL_WAIT,
+	PD_MSG_CTRL_NOT_SUPP,
+	PD_MSG_DATA_SINK_CAP,
+	PD_MSG_DATA_SOURCE_CAP,
+};
+
+enum adev_actions {
+	ADEV_NONE = 0,
+	ADEV_NOTIFY_USB_AND_QUEUE_VDM,
+	ADEV_QUEUE_VDM,
+	ADEV_QUEUE_VDM_SEND_EXIT_MODE_ON_FAIL,
+	ADEV_ATTENTION,
+};
+
+/*
+ * Initial current capability of the new source when vSafe5V is applied during PD3.0 Fast Role Swap.
+ * Based on "Table 6-14 Fixed Supply PDO - Sink" of "USB Power Delivery Specification Revision 3.0,
+ * Version 1.2"
+ */
+enum frs_typec_current {
+	FRS_NOT_SUPPORTED,
+	FRS_DEFAULT_POWER,
+	FRS_5V_1P5A,
+	FRS_5V_3A,
+};
+
+/* Events from low level driver */
+
+#define TCPM_CC_EVENT		BIT(0)
+#define TCPM_VBUS_EVENT		BIT(1)
+#define TCPM_RESET_EVENT	BIT(2)
+#define TCPM_FRS_EVENT		BIT(3)
+#define TCPM_SOURCING_VBUS	BIT(4)
+
+#define LOG_BUFFER_ENTRIES	1024
+#define LOG_BUFFER_ENTRY_SIZE	128
+
+/* Alternate mode support */
+
+#define SVID_DISCOVERY_MAX	16
+#define ALTMODE_DISCOVERY_MAX	(SVID_DISCOVERY_MAX * MODE_DISCOVERY_MAX)
+
+#define GET_SINK_CAP_RETRY_MS	100
+#define SEND_DISCOVER_RETRY_MS	100
+
+struct pd_mode_data {
+	int svid_index;		/* current SVID index		*/
+	int nsvids;
+	u16 svids[SVID_DISCOVERY_MAX];
+	int altmodes;		/* number of alternate modes	*/
+	struct typec_altmode_desc altmode_desc[ALTMODE_DISCOVERY_MAX];
+};
+
+/*
+ * @min_volt: Actual min voltage at the local port
+ * @req_min_volt: Requested min voltage to the port partner
+ * @max_volt: Actual max voltage at the local port
+ * @req_max_volt: Requested max voltage to the port partner
+ * @max_curr: Actual max current at the local port
+ * @req_max_curr: Requested max current of the port partner
+ * @req_out_volt: Requested output voltage to the port partner
+ * @req_op_curr: Requested operating current to the port partner
+ * @supported: Parter has at least one APDO hence supports PPS
+ * @active: PPS mode is active
+ */
+struct pd_pps_data {
+	u32 min_volt;
+	u32 req_min_volt;
+	u32 max_volt;
+	u32 req_max_volt;
+	u32 max_curr;
+	u32 req_max_curr;
+	u32 req_out_volt;
+	u32 req_op_curr;
+	bool supported;
+	bool active;
+};
+
+struct tcpm_port {
+	struct device *dev;
+
+	struct mutex lock;		/* tcpm state machine lock */
+	struct kthread_worker *wq;
+
+	struct typec_capability typec_caps;
+	struct typec_port *typec_port;
+
+	struct tcpc_dev	*tcpc;
+	struct usb_role_switch *role_sw;
+
+	enum typec_role vconn_role;
+	enum typec_role pwr_role;
+	enum typec_data_role data_role;
+	enum typec_pwr_opmode pwr_opmode;
+
+	struct usb_pd_identity partner_ident;
+	struct typec_partner_desc partner_desc;
+	struct typec_partner *partner;
+
+	enum typec_cc_status cc_req;
+	enum typec_cc_status src_rp;	/* work only if pd_supported == false */
+
+	enum typec_cc_status cc1;
+	enum typec_cc_status cc2;
+	enum typec_cc_polarity polarity;
+
+	bool attached;
+	bool connected;
+	bool registered;
+	bool pd_supported;
+	enum typec_port_type port_type;
+
+	/*
+	 * Set to true when vbus is greater than VSAFE5V min.
+	 * Set to false when vbus falls below vSinkDisconnect max threshold.
+	 */
+	bool vbus_present;
+
+	/*
+	 * Set to true when vbus is less than VSAFE0V max.
+	 * Set to false when vbus is greater than VSAFE0V max.
+	 */
+	bool vbus_vsafe0v;
+
+	bool vbus_never_low;
+	bool vbus_source;
+	bool vbus_charge;
+
+	/* Set to true when Discover_Identity Command is expected to be sent in Ready states. */
+	bool send_discover;
+	bool op_vsafe5v;
+
+	int try_role;
+	int try_snk_count;
+	int try_src_count;
+
+	enum pd_msg_request queued_message;
+
+	enum tcpm_state enter_state;
+	enum tcpm_state prev_state;
+	enum tcpm_state state;
+	enum tcpm_state delayed_state;
+	ktime_t delayed_runtime;
+	unsigned long delay_ms;
+
+	spinlock_t pd_event_lock;
+	u32 pd_events;
+
+	struct kthread_work event_work;
+	struct hrtimer state_machine_timer;
+	struct kthread_work state_machine;
+	struct hrtimer vdm_state_machine_timer;
+	struct kthread_work vdm_state_machine;
+	struct hrtimer enable_frs_timer;
+	struct kthread_work enable_frs;
+	struct hrtimer send_discover_timer;
+	struct kthread_work send_discover_work;
+	bool state_machine_running;
+	/* Set to true when VDM State Machine has following actions. */
+	bool vdm_sm_running;
+
+	struct completion tx_complete;
+	enum tcpm_transmit_status tx_status;
+
+	struct mutex swap_lock;		/* swap command lock */
+	bool swap_pending;
+	bool non_pd_role_swap;
+	struct completion swap_complete;
+	int swap_status;
+
+	unsigned int negotiated_rev;
+	unsigned int message_id;
+	unsigned int caps_count;
+	unsigned int hard_reset_count;
+	bool pd_capable;
+	bool explicit_contract;
+	unsigned int rx_msgid;
+
+	/* USB PD objects */
+	struct usb_power_delivery *pd;
+	struct usb_power_delivery_capabilities *port_source_caps;
+	struct usb_power_delivery_capabilities *port_sink_caps;
+	struct usb_power_delivery *partner_pd;
+	struct usb_power_delivery_capabilities *partner_source_caps;
+	struct usb_power_delivery_capabilities *partner_sink_caps;
+
+	/* Partner capabilities/requests */
+	u32 sink_request;
+	u32 source_caps[PDO_MAX_OBJECTS];
+	unsigned int nr_source_caps;
+	u32 sink_caps[PDO_MAX_OBJECTS];
+	unsigned int nr_sink_caps;
+
+	/* Local capabilities */
+	u32 src_pdo[PDO_MAX_OBJECTS];
+	unsigned int nr_src_pdo;
+	u32 snk_pdo[PDO_MAX_OBJECTS];
+	unsigned int nr_snk_pdo;
+	u32 snk_vdo_v1[VDO_MAX_OBJECTS];
+	unsigned int nr_snk_vdo_v1;
+	u32 snk_vdo[VDO_MAX_OBJECTS];
+	unsigned int nr_snk_vdo;
+
+	unsigned int operating_snk_mw;
+	bool update_sink_caps;
+
+	/* Requested current / voltage to the port partner */
+	u32 req_current_limit;
+	u32 req_supply_voltage;
+	/* Actual current / voltage limit of the local port */
+	u32 current_limit;
+	u32 supply_voltage;
+
+	/* Used to export TA voltage and current */
+	struct power_supply *psy;
+	struct power_supply_desc psy_desc;
+	enum power_supply_usb_type usb_type;
+
+	u32 bist_request;
+
+	/* PD state for Vendor Defined Messages */
+	enum vdm_states vdm_state;
+	u32 vdm_retries;
+	/* next Vendor Defined Message to send */
+	u32 vdo_data[VDO_MAX_SIZE];
+	u8 vdo_count;
+	/* VDO to retry if UFP responder replied busy */
+	u32 vdo_retry;
+
+	/* PPS */
+	struct pd_pps_data pps_data;
+	struct completion pps_complete;
+	bool pps_pending;
+	int pps_status;
+
+	/* Alternate mode data */
+	struct pd_mode_data mode_data;
+	struct typec_altmode *partner_altmode[ALTMODE_DISCOVERY_MAX];
+	struct typec_altmode *port_altmode[ALTMODE_DISCOVERY_MAX];
+
+	/* Deadline in jiffies to exit src_try_wait state */
+	unsigned long max_wait;
+
+	/* port belongs to a self powered device */
+	bool self_powered;
+
+	/* Sink FRS */
+	enum frs_typec_current new_source_frs_current;
+
+	/* Sink caps have been queried */
+	bool sink_cap_done;
+
+	/* Collision Avoidance and Atomic Message Sequence */
+	enum tcpm_state upcoming_state;
+	enum tcpm_ams ams;
+	enum tcpm_ams next_ams;
+	bool in_ams;
+
+	/* Auto vbus discharge status */
+	bool auto_vbus_discharge_enabled;
+
+	/*
+	 * When set, port requests PD_P_SNK_STDBY_MW upon entering SNK_DISCOVERY and
+	 * the actual current limit after RX of PD_CTRL_PSRDY for PD link,
+	 * SNK_READY for non-pd link.
+	 */
+	bool slow_charger_loop;
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *dentry;
+	struct mutex logbuffer_lock;	/* log buffer access lock */
+	int logbuffer_head;
+	int logbuffer_tail;
+	u8 *logbuffer[LOG_BUFFER_ENTRIES];
+#endif
+};
+
+struct pd_rx_event {
+	struct kthread_work work;
+	struct tcpm_port *port;
+	struct pd_message msg;
+};
+
+static const char * const pd_rev[] = {
+	[PD_REV10]		= "rev1",
+	[PD_REV20]		= "rev2",
+	[PD_REV30]		= "rev3",
+};
+
+#define tcpm_cc_is_sink(cc) \
+	((cc) == TYPEC_CC_RP_DEF || (cc) == TYPEC_CC_RP_1_5 || \
+	 (cc) == TYPEC_CC_RP_3_0)
+
+#define tcpm_port_is_sink(port) \
+	((tcpm_cc_is_sink((port)->cc1) && !tcpm_cc_is_sink((port)->cc2)) || \
+	 (tcpm_cc_is_sink((port)->cc2) && !tcpm_cc_is_sink((port)->cc1)))
+
+#define tcpm_cc_is_source(cc) ((cc) == TYPEC_CC_RD)
+#define tcpm_cc_is_audio(cc) ((cc) == TYPEC_CC_RA)
+#define tcpm_cc_is_open(cc) ((cc) == TYPEC_CC_OPEN)
+
+#define tcpm_port_is_source(port) \
+	((tcpm_cc_is_source((port)->cc1) && \
+	 !tcpm_cc_is_source((port)->cc2)) || \
+	 (tcpm_cc_is_source((port)->cc2) && \
+	  !tcpm_cc_is_source((port)->cc1)))
+
+#define tcpm_port_is_debug(port) \
+	(tcpm_cc_is_source((port)->cc1) && tcpm_cc_is_source((port)->cc2))
+
+#define tcpm_port_is_audio(port) \
+	(tcpm_cc_is_audio((port)->cc1) && tcpm_cc_is_audio((port)->cc2))
+
+#define tcpm_port_is_audio_detached(port) \
+	((tcpm_cc_is_audio((port)->cc1) && tcpm_cc_is_open((port)->cc2)) || \
+	 (tcpm_cc_is_audio((port)->cc2) && tcpm_cc_is_open((port)->cc1)))
+
+#define tcpm_try_snk(port) \
+	((port)->try_snk_count == 0 && (port)->try_role == TYPEC_SINK && \
+	(port)->port_type == TYPEC_PORT_DRP)
+
+#define tcpm_try_src(port) \
+	((port)->try_src_count == 0 && (port)->try_role == TYPEC_SOURCE && \
+	(port)->port_type == TYPEC_PORT_DRP)
+
+#define tcpm_data_role_for_source(port) \
+	((port)->typec_caps.data == TYPEC_PORT_UFP ? \
+	TYPEC_DEVICE : TYPEC_HOST)
+
+#define tcpm_data_role_for_sink(port) \
+	((port)->typec_caps.data == TYPEC_PORT_DFP ? \
+	TYPEC_HOST : TYPEC_DEVICE)
+
+#define tcpm_sink_tx_ok(port) \
+	(tcpm_port_is_sink(port) && \
+	((port)->cc1 == TYPEC_CC_RP_3_0 || (port)->cc2 == TYPEC_CC_RP_3_0))
+
+#define tcpm_wait_for_discharge(port) \
+	(((port)->auto_vbus_discharge_enabled && !(port)->vbus_vsafe0v) ? PD_T_SAFE_0V : 0)
+
+static enum tcpm_state tcpm_default_state(struct tcpm_port *port)
+{
+	if (port->port_type == TYPEC_PORT_DRP) {
+		if (port->try_role == TYPEC_SINK)
+			return SNK_UNATTACHED;
+		else if (port->try_role == TYPEC_SOURCE)
+			return SRC_UNATTACHED;
+		/* Fall through to return SRC_UNATTACHED */
+	} else if (port->port_type == TYPEC_PORT_SNK) {
+		return SNK_UNATTACHED;
+	}
+	return SRC_UNATTACHED;
+}
+
+static bool tcpm_port_is_disconnected(struct tcpm_port *port)
+{
+	return (!port->attached && port->cc1 == TYPEC_CC_OPEN &&
+		port->cc2 == TYPEC_CC_OPEN) ||
+	       (port->attached && ((port->polarity == TYPEC_POLARITY_CC1 &&
+				    port->cc1 == TYPEC_CC_OPEN) ||
+				   (port->polarity == TYPEC_POLARITY_CC2 &&
+				    port->cc2 == TYPEC_CC_OPEN)));
+}
+
+/*
+ * Logging
+ */
+
+#ifdef CONFIG_DEBUG_FS
+
+static bool tcpm_log_full(struct tcpm_port *port)
+{
+	return port->logbuffer_tail ==
+		(port->logbuffer_head + 1) % LOG_BUFFER_ENTRIES;
+}
+
+__printf(2, 0)
+static void _tcpm_log(struct tcpm_port *port, const char *fmt, va_list args)
+{
+	char tmpbuffer[LOG_BUFFER_ENTRY_SIZE];
+	u64 ts_nsec = local_clock();
+	unsigned long rem_nsec;
+
+	mutex_lock(&port->logbuffer_lock);
+	if (!port->logbuffer[port->logbuffer_head]) {
+		port->logbuffer[port->logbuffer_head] =
+				kzalloc(LOG_BUFFER_ENTRY_SIZE, GFP_KERNEL);
+		if (!port->logbuffer[port->logbuffer_head]) {
+			mutex_unlock(&port->logbuffer_lock);
+			return;
+		}
+	}
+
+	vsnprintf(tmpbuffer, sizeof(tmpbuffer), fmt, args);
+
+	if (tcpm_log_full(port)) {
+		port->logbuffer_head = max(port->logbuffer_head - 1, 0);
+		strcpy(tmpbuffer, "overflow");
+	}
+
+	if (port->logbuffer_head < 0 ||
+	    port->logbuffer_head >= LOG_BUFFER_ENTRIES) {
+		dev_warn(port->dev,
+			 "Bad log buffer index %d\n", port->logbuffer_head);
+		goto abort;
+	}
+
+	if (!port->logbuffer[port->logbuffer_head]) {
+		dev_warn(port->dev,
+			 "Log buffer index %d is NULL\n", port->logbuffer_head);
+		goto abort;
+	}
+
+	rem_nsec = do_div(ts_nsec, 1000000000);
+	scnprintf(port->logbuffer[port->logbuffer_head],
+		  LOG_BUFFER_ENTRY_SIZE, "[%5lu.%06lu] %s",
+		  (unsigned long)ts_nsec, rem_nsec / 1000,
+		  tmpbuffer);
+	port->logbuffer_head = (port->logbuffer_head + 1) % LOG_BUFFER_ENTRIES;
+
+abort:
+	mutex_unlock(&port->logbuffer_lock);
+}
+
+__printf(2, 3)
+static void tcpm_log(struct tcpm_port *port, const char *fmt, ...)
+{
+	va_list args;
+
+	/* Do not log while disconnected and unattached */
+	if (tcpm_port_is_disconnected(port) &&
+	    (port->state == SRC_UNATTACHED || port->state == SNK_UNATTACHED ||
+	     port->state == TOGGLING))
+		return;
+
+	va_start(args, fmt);
+	_tcpm_log(port, fmt, args);
+	va_end(args);
+}
+
+__printf(2, 3)
+static void tcpm_log_force(struct tcpm_port *port, const char *fmt, ...)
+{
+	va_list args;
+
+	va_start(args, fmt);
+	_tcpm_log(port, fmt, args);
+	va_end(args);
+}
+
+static void tcpm_log_source_caps(struct tcpm_port *port)
+{
+	int i;
+
+	for (i = 0; i < port->nr_source_caps; i++) {
+		u32 pdo = port->source_caps[i];
+		enum pd_pdo_type type = pdo_type(pdo);
+		char msg[64];
+
+		switch (type) {
+		case PDO_TYPE_FIXED:
+			scnprintf(msg, sizeof(msg),
+				  "%u mV, %u mA [%s%s%s%s%s%s]",
+				  pdo_fixed_voltage(pdo),
+				  pdo_max_current(pdo),
+				  (pdo & PDO_FIXED_DUAL_ROLE) ?
+							"R" : "",
+				  (pdo & PDO_FIXED_SUSPEND) ?
+							"S" : "",
+				  (pdo & PDO_FIXED_HIGHER_CAP) ?
+							"H" : "",
+				  (pdo & PDO_FIXED_USB_COMM) ?
+							"U" : "",
+				  (pdo & PDO_FIXED_DATA_SWAP) ?
+							"D" : "",
+				  (pdo & PDO_FIXED_EXTPOWER) ?
+							"E" : "");
+			break;
+		case PDO_TYPE_VAR:
+			scnprintf(msg, sizeof(msg),
+				  "%u-%u mV, %u mA",
+				  pdo_min_voltage(pdo),
+				  pdo_max_voltage(pdo),
+				  pdo_max_current(pdo));
+			break;
+		case PDO_TYPE_BATT:
+			scnprintf(msg, sizeof(msg),
+				  "%u-%u mV, %u mW",
+				  pdo_min_voltage(pdo),
+				  pdo_max_voltage(pdo),
+				  pdo_max_power(pdo));
+			break;
+		case PDO_TYPE_APDO:
+			if (pdo_apdo_type(pdo) == APDO_TYPE_PPS)
+				scnprintf(msg, sizeof(msg),
+					  "%u-%u mV, %u mA",
+					  pdo_pps_apdo_min_voltage(pdo),
+					  pdo_pps_apdo_max_voltage(pdo),
+					  pdo_pps_apdo_max_current(pdo));
+			else
+				strcpy(msg, "undefined APDO");
+			break;
+		default:
+			strcpy(msg, "undefined");
+			break;
+		}
+		tcpm_log(port, " PDO %d: type %d, %s",
+			 i, type, msg);
+	}
+}
+
+static int tcpm_debug_show(struct seq_file *s, void *v)
+{
+	struct tcpm_port *port = (struct tcpm_port *)s->private;
+	int tail;
+
+	mutex_lock(&port->logbuffer_lock);
+	tail = port->logbuffer_tail;
+	while (tail != port->logbuffer_head) {
+		seq_printf(s, "%s\n", port->logbuffer[tail]);
+		tail = (tail + 1) % LOG_BUFFER_ENTRIES;
+	}
+	if (!seq_has_overflowed(s))
+		port->logbuffer_tail = tail;
+	mutex_unlock(&port->logbuffer_lock);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(tcpm_debug);
+
+static void tcpm_debugfs_init(struct tcpm_port *port)
+{
+	char name[NAME_MAX];
+
+	mutex_init(&port->logbuffer_lock);
+	snprintf(name, NAME_MAX, "tcpm-%s", dev_name(port->dev));
+	port->dentry = debugfs_create_dir(name, usb_debug_root);
+	debugfs_create_file("log", S_IFREG | 0444, port->dentry, port,
+			    &tcpm_debug_fops);
+}
+
+static void tcpm_debugfs_exit(struct tcpm_port *port)
+{
+	int i;
+
+	mutex_lock(&port->logbuffer_lock);
+	for (i = 0; i < LOG_BUFFER_ENTRIES; i++) {
+		kfree(port->logbuffer[i]);
+		port->logbuffer[i] = NULL;
+	}
+	mutex_unlock(&port->logbuffer_lock);
+
+	debugfs_remove(port->dentry);
+}
+
+#else
+
+__printf(2, 3)
+static void tcpm_log(const struct tcpm_port *port, const char *fmt, ...) { }
+__printf(2, 3)
+static void tcpm_log_force(struct tcpm_port *port, const char *fmt, ...) { }
+static void tcpm_log_source_caps(struct tcpm_port *port) { }
+static void tcpm_debugfs_init(const struct tcpm_port *port) { }
+static void tcpm_debugfs_exit(const struct tcpm_port *port) { }
+
+#endif
+
+static void tcpm_set_cc(struct tcpm_port *port, enum typec_cc_status cc)
+{
+	tcpm_log(port, "cc:=%d", cc);
+	port->cc_req = cc;
+	port->tcpc->set_cc(port->tcpc, cc);
+}
+
+static int tcpm_enable_auto_vbus_discharge(struct tcpm_port *port, bool enable)
+{
+	int ret = 0;
+
+	if (port->tcpc->enable_auto_vbus_discharge) {
+		ret = port->tcpc->enable_auto_vbus_discharge(port->tcpc, enable);
+		tcpm_log_force(port, "%s vbus discharge ret:%d", enable ? "enable" : "disable",
+			       ret);
+		if (!ret)
+			port->auto_vbus_discharge_enabled = enable;
+	}
+
+	return ret;
+}
+
+static void tcpm_apply_rc(struct tcpm_port *port)
+{
+	/*
+	 * TCPCI: Move to APPLY_RC state to prevent disconnect during PR_SWAP
+	 * when Vbus auto discharge on disconnect is enabled.
+	 */
+	if (port->tcpc->enable_auto_vbus_discharge && port->tcpc->apply_rc) {
+		tcpm_log(port, "Apply_RC");
+		port->tcpc->apply_rc(port->tcpc, port->cc_req, port->polarity);
+		tcpm_enable_auto_vbus_discharge(port, false);
+	}
+}
+
+/*
+ * Determine RP value to set based on maximum current supported
+ * by a port if configured as source.
+ * Returns CC value to report to link partner.
+ */
+static enum typec_cc_status tcpm_rp_cc(struct tcpm_port *port)
+{
+	const u32 *src_pdo = port->src_pdo;
+	int nr_pdo = port->nr_src_pdo;
+	int i;
+
+	if (!port->pd_supported)
+		return port->src_rp;
+
+	/*
+	 * Search for first entry with matching voltage.
+	 * It should report the maximum supported current.
+	 */
+	for (i = 0; i < nr_pdo; i++) {
+		const u32 pdo = src_pdo[i];
+
+		if (pdo_type(pdo) == PDO_TYPE_FIXED &&
+		    pdo_fixed_voltage(pdo) == 5000) {
+			unsigned int curr = pdo_max_current(pdo);
+
+			if (curr >= 3000)
+				return TYPEC_CC_RP_3_0;
+			else if (curr >= 1500)
+				return TYPEC_CC_RP_1_5;
+			return TYPEC_CC_RP_DEF;
+		}
+	}
+
+	return TYPEC_CC_RP_DEF;
+}
+
+static void tcpm_ams_finish(struct tcpm_port *port)
+{
+	tcpm_log(port, "AMS %s finished", tcpm_ams_str[port->ams]);
+
+	if (port->pd_capable && port->pwr_role == TYPEC_SOURCE) {
+		if (port->negotiated_rev >= PD_REV30)
+			tcpm_set_cc(port, SINK_TX_OK);
+		else
+			tcpm_set_cc(port, SINK_TX_NG);
+	} else if (port->pwr_role == TYPEC_SOURCE) {
+		tcpm_set_cc(port, tcpm_rp_cc(port));
+	}
+
+	port->in_ams = false;
+	port->ams = NONE_AMS;
+}
+
+static int tcpm_pd_transmit(struct tcpm_port *port,
+			    enum tcpm_transmit_type type,
+			    const struct pd_message *msg)
+{
+	unsigned long timeout;
+	int ret;
+
+	if (msg)
+		tcpm_log(port, "PD TX, header: %#x", le16_to_cpu(msg->header));
+	else
+		tcpm_log(port, "PD TX, type: %#x", type);
+
+	reinit_completion(&port->tx_complete);
+	ret = port->tcpc->pd_transmit(port->tcpc, type, msg, port->negotiated_rev);
+	if (ret < 0)
+		return ret;
+
+	mutex_unlock(&port->lock);
+	timeout = wait_for_completion_timeout(&port->tx_complete,
+				msecs_to_jiffies(PD_T_TCPC_TX_TIMEOUT));
+	mutex_lock(&port->lock);
+	if (!timeout)
+		return -ETIMEDOUT;
+
+	switch (port->tx_status) {
+	case TCPC_TX_SUCCESS:
+		port->message_id = (port->message_id + 1) & PD_HEADER_ID_MASK;
+		/*
+		 * USB PD rev 2.0, 8.3.2.2.1:
+		 * USB PD rev 3.0, 8.3.2.1.3:
+		 * "... Note that every AMS is Interruptible until the first
+		 * Message in the sequence has been successfully sent (GoodCRC
+		 * Message received)."
+		 */
+		if (port->ams != NONE_AMS)
+			port->in_ams = true;
+		break;
+	case TCPC_TX_DISCARDED:
+		ret = -EAGAIN;
+		break;
+	case TCPC_TX_FAILED:
+	default:
+		ret = -EIO;
+		break;
+	}
+
+	/* Some AMS don't expect responses. Finish them here. */
+	if (port->ams == ATTENTION || port->ams == SOURCE_ALERT)
+		tcpm_ams_finish(port);
+
+	return ret;
+}
+
+void tcpm_pd_transmit_complete(struct tcpm_port *port,
+			       enum tcpm_transmit_status status)
+{
+	tcpm_log(port, "PD TX complete, status: %u", status);
+	port->tx_status = status;
+	complete(&port->tx_complete);
+}
+EXPORT_SYMBOL_GPL(tcpm_pd_transmit_complete);
+
+static int tcpm_mux_set(struct tcpm_port *port, int state,
+			enum usb_role usb_role,
+			enum typec_orientation orientation)
+{
+	int ret;
+
+	tcpm_log(port, "Requesting mux state %d, usb-role %d, orientation %d",
+		 state, usb_role, orientation);
+
+	ret = typec_set_orientation(port->typec_port, orientation);
+	if (ret)
+		return ret;
+
+	if (port->role_sw) {
+		ret = usb_role_switch_set_role(port->role_sw, usb_role);
+		if (ret)
+			return ret;
+	}
+
+	return typec_set_mode(port->typec_port, state);
+}
+
+static int tcpm_set_polarity(struct tcpm_port *port,
+			     enum typec_cc_polarity polarity)
+{
+	int ret;
+
+	tcpm_log(port, "polarity %d", polarity);
+
+	ret = port->tcpc->set_polarity(port->tcpc, polarity);
+	if (ret < 0)
+		return ret;
+
+	port->polarity = polarity;
+
+	return 0;
+}
+
+static int tcpm_set_vconn(struct tcpm_port *port, bool enable)
+{
+	int ret;
+
+	tcpm_log(port, "vconn:=%d", enable);
+
+	ret = port->tcpc->set_vconn(port->tcpc, enable);
+	if (!ret) {
+		port->vconn_role = enable ? TYPEC_SOURCE : TYPEC_SINK;
+		typec_set_vconn_role(port->typec_port, port->vconn_role);
+	}
+
+	return ret;
+}
+
+static u32 tcpm_get_current_limit(struct tcpm_port *port)
+{
+	enum typec_cc_status cc;
+	u32 limit;
+
+	cc = port->polarity ? port->cc2 : port->cc1;
+	switch (cc) {
+	case TYPEC_CC_RP_1_5:
+		limit = 1500;
+		break;
+	case TYPEC_CC_RP_3_0:
+		limit = 3000;
+		break;
+	case TYPEC_CC_RP_DEF:
+	default:
+		if (port->tcpc->get_current_limit)
+			limit = port->tcpc->get_current_limit(port->tcpc);
+		else
+			limit = 0;
+		break;
+	}
+
+	return limit;
+}
+
+static int tcpm_set_current_limit(struct tcpm_port *port, u32 max_ma, u32 mv)
+{
+	int ret = -EOPNOTSUPP;
+
+	tcpm_log(port, "Setting voltage/current limit %u mV %u mA", mv, max_ma);
+
+	port->supply_voltage = mv;
+	port->current_limit = max_ma;
+	power_supply_changed(port->psy);
+
+	if (port->tcpc->set_current_limit)
+		ret = port->tcpc->set_current_limit(port->tcpc, max_ma, mv);
+
+	return ret;
+}
+
+static int tcpm_set_attached_state(struct tcpm_port *port, bool attached)
+{
+	return port->tcpc->set_roles(port->tcpc, attached, port->pwr_role,
+				     port->data_role);
+}
+
+static int tcpm_set_roles(struct tcpm_port *port, bool attached,
+			  enum typec_role role, enum typec_data_role data)
+{
+	enum typec_orientation orientation;
+	enum usb_role usb_role;
+	int ret;
+
+	if (port->polarity == TYPEC_POLARITY_CC1)
+		orientation = TYPEC_ORIENTATION_NORMAL;
+	else
+		orientation = TYPEC_ORIENTATION_REVERSE;
+
+	if (port->typec_caps.data == TYPEC_PORT_DRD) {
+		if (data == TYPEC_HOST)
+			usb_role = USB_ROLE_HOST;
+		else
+			usb_role = USB_ROLE_DEVICE;
+	} else if (port->typec_caps.data == TYPEC_PORT_DFP) {
+		if (data == TYPEC_HOST) {
+			if (role == TYPEC_SOURCE)
+				usb_role = USB_ROLE_HOST;
+			else
+				usb_role = USB_ROLE_NONE;
+		} else {
+			return -ENOTSUPP;
+		}
+	} else {
+		if (data == TYPEC_DEVICE) {
+			if (role == TYPEC_SINK)
+				usb_role = USB_ROLE_DEVICE;
+			else
+				usb_role = USB_ROLE_NONE;
+		} else {
+			return -ENOTSUPP;
+		}
+	}
+
+	ret = tcpm_mux_set(port, TYPEC_STATE_USB, usb_role, orientation);
+	if (ret < 0)
+		return ret;
+
+	ret = port->tcpc->set_roles(port->tcpc, attached, role, data);
+	if (ret < 0)
+		return ret;
+
+	port->pwr_role = role;
+	port->data_role = data;
+	typec_set_data_role(port->typec_port, data);
+	typec_set_pwr_role(port->typec_port, role);
+
+	return 0;
+}
+
+static int tcpm_set_pwr_role(struct tcpm_port *port, enum typec_role role)
+{
+	int ret;
+
+	ret = port->tcpc->set_roles(port->tcpc, true, role,
+				    port->data_role);
+	if (ret < 0)
+		return ret;
+
+	port->pwr_role = role;
+	typec_set_pwr_role(port->typec_port, role);
+
+	return 0;
+}
+
+/*
+ * Transform the PDO to be compliant to PD rev2.0.
+ * Return 0 if the PDO type is not defined in PD rev2.0.
+ * Otherwise, return the converted PDO.
+ */
+static u32 tcpm_forge_legacy_pdo(struct tcpm_port *port, u32 pdo, enum typec_role role)
+{
+	switch (pdo_type(pdo)) {
+	case PDO_TYPE_FIXED:
+		if (role == TYPEC_SINK)
+			return pdo & ~PDO_FIXED_FRS_CURR_MASK;
+		else
+			return pdo & ~PDO_FIXED_UNCHUNK_EXT;
+	case PDO_TYPE_VAR:
+	case PDO_TYPE_BATT:
+		return pdo;
+	case PDO_TYPE_APDO:
+	default:
+		return 0;
+	}
+}
+
+static int tcpm_pd_send_source_caps(struct tcpm_port *port)
+{
+	struct pd_message msg;
+	u32 pdo;
+	unsigned int i, nr_pdo = 0;
+
+	memset(&msg, 0, sizeof(msg));
+
+	for (i = 0; i < port->nr_src_pdo; i++) {
+		if (port->negotiated_rev >= PD_REV30) {
+			msg.payload[nr_pdo++] =	cpu_to_le32(port->src_pdo[i]);
+		} else {
+			pdo = tcpm_forge_legacy_pdo(port, port->src_pdo[i], TYPEC_SOURCE);
+			if (pdo)
+				msg.payload[nr_pdo++] = cpu_to_le32(pdo);
+		}
+	}
+
+	if (!nr_pdo) {
+		/* No source capabilities defined, sink only */
+		msg.header = PD_HEADER_LE(PD_CTRL_REJECT,
+					  port->pwr_role,
+					  port->data_role,
+					  port->negotiated_rev,
+					  port->message_id, 0);
+	} else {
+		msg.header = PD_HEADER_LE(PD_DATA_SOURCE_CAP,
+					  port->pwr_role,
+					  port->data_role,
+					  port->negotiated_rev,
+					  port->message_id,
+					  nr_pdo);
+	}
+
+	return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg);
+}
+
+static int tcpm_pd_send_sink_caps(struct tcpm_port *port)
+{
+	struct pd_message msg;
+	u32 pdo;
+	unsigned int i, nr_pdo = 0;
+
+	memset(&msg, 0, sizeof(msg));
+
+	for (i = 0; i < port->nr_snk_pdo; i++) {
+		if (port->negotiated_rev >= PD_REV30) {
+			msg.payload[nr_pdo++] =	cpu_to_le32(port->snk_pdo[i]);
+		} else {
+			pdo = tcpm_forge_legacy_pdo(port, port->snk_pdo[i], TYPEC_SINK);
+			if (pdo)
+				msg.payload[nr_pdo++] = cpu_to_le32(pdo);
+		}
+	}
+
+	if (!nr_pdo) {
+		/* No sink capabilities defined, source only */
+		msg.header = PD_HEADER_LE(PD_CTRL_REJECT,
+					  port->pwr_role,
+					  port->data_role,
+					  port->negotiated_rev,
+					  port->message_id, 0);
+	} else {
+		msg.header = PD_HEADER_LE(PD_DATA_SINK_CAP,
+					  port->pwr_role,
+					  port->data_role,
+					  port->negotiated_rev,
+					  port->message_id,
+					  nr_pdo);
+	}
+
+	return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg);
+}
+
+static void mod_tcpm_delayed_work(struct tcpm_port *port, unsigned int delay_ms)
+{
+	if (delay_ms) {
+		hrtimer_start(&port->state_machine_timer, ms_to_ktime(delay_ms), HRTIMER_MODE_REL);
+	} else {
+		hrtimer_cancel(&port->state_machine_timer);
+		kthread_queue_work(port->wq, &port->state_machine);
+	}
+}
+
+static void mod_vdm_delayed_work(struct tcpm_port *port, unsigned int delay_ms)
+{
+	if (delay_ms) {
+		hrtimer_start(&port->vdm_state_machine_timer, ms_to_ktime(delay_ms),
+			      HRTIMER_MODE_REL);
+	} else {
+		hrtimer_cancel(&port->vdm_state_machine_timer);
+		kthread_queue_work(port->wq, &port->vdm_state_machine);
+	}
+}
+
+static void mod_enable_frs_delayed_work(struct tcpm_port *port, unsigned int delay_ms)
+{
+	if (delay_ms) {
+		hrtimer_start(&port->enable_frs_timer, ms_to_ktime(delay_ms), HRTIMER_MODE_REL);
+	} else {
+		hrtimer_cancel(&port->enable_frs_timer);
+		kthread_queue_work(port->wq, &port->enable_frs);
+	}
+}
+
+static void mod_send_discover_delayed_work(struct tcpm_port *port, unsigned int delay_ms)
+{
+	if (delay_ms) {
+		hrtimer_start(&port->send_discover_timer, ms_to_ktime(delay_ms), HRTIMER_MODE_REL);
+	} else {
+		hrtimer_cancel(&port->send_discover_timer);
+		kthread_queue_work(port->wq, &port->send_discover_work);
+	}
+}
+
+static void tcpm_set_state(struct tcpm_port *port, enum tcpm_state state,
+			   unsigned int delay_ms)
+{
+	if (delay_ms) {
+		tcpm_log(port, "pending state change %s -> %s @ %u ms [%s %s]",
+			 tcpm_states[port->state], tcpm_states[state], delay_ms,
+			 pd_rev[port->negotiated_rev], tcpm_ams_str[port->ams]);
+		port->delayed_state = state;
+		mod_tcpm_delayed_work(port, delay_ms);
+		port->delayed_runtime = ktime_add(ktime_get(), ms_to_ktime(delay_ms));
+		port->delay_ms = delay_ms;
+	} else {
+		tcpm_log(port, "state change %s -> %s [%s %s]",
+			 tcpm_states[port->state], tcpm_states[state],
+			 pd_rev[port->negotiated_rev], tcpm_ams_str[port->ams]);
+		port->delayed_state = INVALID_STATE;
+		port->prev_state = port->state;
+		port->state = state;
+		/*
+		 * Don't re-queue the state machine work item if we're currently
+		 * in the state machine and we're immediately changing states.
+		 * tcpm_state_machine_work() will continue running the state
+		 * machine.
+		 */
+		if (!port->state_machine_running)
+			mod_tcpm_delayed_work(port, 0);
+	}
+}
+
+static void tcpm_set_state_cond(struct tcpm_port *port, enum tcpm_state state,
+				unsigned int delay_ms)
+{
+	if (port->enter_state == port->state)
+		tcpm_set_state(port, state, delay_ms);
+	else
+		tcpm_log(port,
+			 "skipped %sstate change %s -> %s [%u ms], context state %s [%s %s]",
+			 delay_ms ? "delayed " : "",
+			 tcpm_states[port->state], tcpm_states[state],
+			 delay_ms, tcpm_states[port->enter_state],
+			 pd_rev[port->negotiated_rev], tcpm_ams_str[port->ams]);
+}
+
+static void tcpm_queue_message(struct tcpm_port *port,
+			       enum pd_msg_request message)
+{
+	port->queued_message = message;
+	mod_tcpm_delayed_work(port, 0);
+}
+
+static bool tcpm_vdm_ams(struct tcpm_port *port)
+{
+	switch (port->ams) {
+	case DISCOVER_IDENTITY:
+	case SOURCE_STARTUP_CABLE_PLUG_DISCOVER_IDENTITY:
+	case DISCOVER_SVIDS:
+	case DISCOVER_MODES:
+	case DFP_TO_UFP_ENTER_MODE:
+	case DFP_TO_UFP_EXIT_MODE:
+	case DFP_TO_CABLE_PLUG_ENTER_MODE:
+	case DFP_TO_CABLE_PLUG_EXIT_MODE:
+	case ATTENTION:
+	case UNSTRUCTURED_VDMS:
+	case STRUCTURED_VDMS:
+		break;
+	default:
+		return false;
+	}
+
+	return true;
+}
+
+static bool tcpm_ams_interruptible(struct tcpm_port *port)
+{
+	switch (port->ams) {
+	/* Interruptible AMS */
+	case NONE_AMS:
+	case SECURITY:
+	case FIRMWARE_UPDATE:
+	case DISCOVER_IDENTITY:
+	case SOURCE_STARTUP_CABLE_PLUG_DISCOVER_IDENTITY:
+	case DISCOVER_SVIDS:
+	case DISCOVER_MODES:
+	case DFP_TO_UFP_ENTER_MODE:
+	case DFP_TO_UFP_EXIT_MODE:
+	case DFP_TO_CABLE_PLUG_ENTER_MODE:
+	case DFP_TO_CABLE_PLUG_EXIT_MODE:
+	case UNSTRUCTURED_VDMS:
+	case STRUCTURED_VDMS:
+	case COUNTRY_INFO:
+	case COUNTRY_CODES:
+		break;
+	/* Non-Interruptible AMS */
+	default:
+		if (port->in_ams)
+			return false;
+		break;
+	}
+
+	return true;
+}
+
+static int tcpm_ams_start(struct tcpm_port *port, enum tcpm_ams ams)
+{
+	int ret = 0;
+
+	tcpm_log(port, "AMS %s start", tcpm_ams_str[ams]);
+
+	if (!tcpm_ams_interruptible(port) &&
+	    !(ams == HARD_RESET || ams == SOFT_RESET_AMS)) {
+		port->upcoming_state = INVALID_STATE;
+		tcpm_log(port, "AMS %s not interruptible, aborting",
+			 tcpm_ams_str[port->ams]);
+		return -EAGAIN;
+	}
+
+	if (port->pwr_role == TYPEC_SOURCE) {
+		enum typec_cc_status cc_req = port->cc_req;
+
+		port->ams = ams;
+
+		if (ams == HARD_RESET) {
+			tcpm_set_cc(port, tcpm_rp_cc(port));
+			tcpm_pd_transmit(port, TCPC_TX_HARD_RESET, NULL);
+			tcpm_set_state(port, HARD_RESET_START, 0);
+			return ret;
+		} else if (ams == SOFT_RESET_AMS) {
+			if (!port->explicit_contract)
+				tcpm_set_cc(port, tcpm_rp_cc(port));
+			tcpm_set_state(port, SOFT_RESET_SEND, 0);
+			return ret;
+		} else if (tcpm_vdm_ams(port)) {
+			/* tSinkTx is enforced in vdm_run_state_machine */
+			if (port->negotiated_rev >= PD_REV30)
+				tcpm_set_cc(port, SINK_TX_NG);
+			return ret;
+		}
+
+		if (port->negotiated_rev >= PD_REV30)
+			tcpm_set_cc(port, SINK_TX_NG);
+
+		switch (port->state) {
+		case SRC_READY:
+		case SRC_STARTUP:
+		case SRC_SOFT_RESET_WAIT_SNK_TX:
+		case SOFT_RESET:
+		case SOFT_RESET_SEND:
+			if (port->negotiated_rev >= PD_REV30)
+				tcpm_set_state(port, AMS_START,
+					       cc_req == SINK_TX_OK ?
+					       PD_T_SINK_TX : 0);
+			else
+				tcpm_set_state(port, AMS_START, 0);
+			break;
+		default:
+			if (port->negotiated_rev >= PD_REV30)
+				tcpm_set_state(port, SRC_READY,
+					       cc_req == SINK_TX_OK ?
+					       PD_T_SINK_TX : 0);
+			else
+				tcpm_set_state(port, SRC_READY, 0);
+			break;
+		}
+	} else {
+		if (port->negotiated_rev >= PD_REV30 &&
+		    !tcpm_sink_tx_ok(port) &&
+		    ams != SOFT_RESET_AMS &&
+		    ams != HARD_RESET) {
+			port->upcoming_state = INVALID_STATE;
+			tcpm_log(port, "Sink TX No Go");
+			return -EAGAIN;
+		}
+
+		port->ams = ams;
+
+		if (ams == HARD_RESET) {
+			tcpm_pd_transmit(port, TCPC_TX_HARD_RESET, NULL);
+			tcpm_set_state(port, HARD_RESET_START, 0);
+			return ret;
+		} else if (tcpm_vdm_ams(port)) {
+			return ret;
+		}
+
+		if (port->state == SNK_READY ||
+		    port->state == SNK_SOFT_RESET)
+			tcpm_set_state(port, AMS_START, 0);
+		else
+			tcpm_set_state(port, SNK_READY, 0);
+	}
+
+	return ret;
+}
+
+/*
+ * VDM/VDO handling functions
+ */
+static void tcpm_queue_vdm(struct tcpm_port *port, const u32 header,
+			   const u32 *data, int cnt)
+{
+	u32 vdo_hdr = port->vdo_data[0];
+
+	WARN_ON(!mutex_is_locked(&port->lock));
+
+	/* If is sending discover_identity, handle received message first */
+	if (PD_VDO_SVDM(vdo_hdr) && PD_VDO_CMD(vdo_hdr) == CMD_DISCOVER_IDENT) {
+		port->send_discover = true;
+		mod_send_discover_delayed_work(port, SEND_DISCOVER_RETRY_MS);
+	} else {
+		/* Make sure we are not still processing a previous VDM packet */
+		WARN_ON(port->vdm_state > VDM_STATE_DONE);
+	}
+
+	port->vdo_count = cnt + 1;
+	port->vdo_data[0] = header;
+	memcpy(&port->vdo_data[1], data, sizeof(u32) * cnt);
+	/* Set ready, vdm state machine will actually send */
+	port->vdm_retries = 0;
+	port->vdm_state = VDM_STATE_READY;
+	port->vdm_sm_running = true;
+
+	mod_vdm_delayed_work(port, 0);
+}
+
+static void tcpm_queue_vdm_unlocked(struct tcpm_port *port, const u32 header,
+				    const u32 *data, int cnt)
+{
+	mutex_lock(&port->lock);
+	tcpm_queue_vdm(port, header, data, cnt);
+	mutex_unlock(&port->lock);
+}
+
+static void svdm_consume_identity(struct tcpm_port *port, const u32 *p, int cnt)
+{
+	u32 vdo = p[VDO_INDEX_IDH];
+	u32 product = p[VDO_INDEX_PRODUCT];
+
+	memset(&port->mode_data, 0, sizeof(port->mode_data));
+
+	port->partner_ident.id_header = vdo;
+	port->partner_ident.cert_stat = p[VDO_INDEX_CSTAT];
+	port->partner_ident.product = product;
+
+	typec_partner_set_identity(port->partner);
+
+	tcpm_log(port, "Identity: %04x:%04x.%04x",
+		 PD_IDH_VID(vdo),
+		 PD_PRODUCT_PID(product), product & 0xffff);
+}
+
+static bool svdm_consume_svids(struct tcpm_port *port, const u32 *p, int cnt)
+{
+	struct pd_mode_data *pmdata = &port->mode_data;
+	int i;
+
+	for (i = 1; i < cnt; i++) {
+		u16 svid;
+
+		svid = (p[i] >> 16) & 0xffff;
+		if (!svid)
+			return false;
+
+		if (pmdata->nsvids >= SVID_DISCOVERY_MAX)
+			goto abort;
+
+		pmdata->svids[pmdata->nsvids++] = svid;
+		tcpm_log(port, "SVID %d: 0x%x", pmdata->nsvids, svid);
+
+		svid = p[i] & 0xffff;
+		if (!svid)
+			return false;
+
+		if (pmdata->nsvids >= SVID_DISCOVERY_MAX)
+			goto abort;
+
+		pmdata->svids[pmdata->nsvids++] = svid;
+		tcpm_log(port, "SVID %d: 0x%x", pmdata->nsvids, svid);
+	}
+
+	/*
+	 * PD3.0 Spec 6.4.4.3.2: The SVIDs are returned 2 per VDO (see Table
+	 * 6-43), and can be returned maximum 6 VDOs per response (see Figure
+	 * 6-19). If the Respondersupports 12 or more SVID then the Discover
+	 * SVIDs Command Shall be executed multiple times until a Discover
+	 * SVIDs VDO is returned ending either with a SVID value of 0x0000 in
+	 * the last part of the last VDO or with a VDO containing two SVIDs
+	 * with values of 0x0000.
+	 *
+	 * However, some odd dockers support SVIDs less than 12 but without
+	 * 0x0000 in the last VDO, so we need to break the Discover SVIDs
+	 * request and return false here.
+	 */
+	return cnt == 7;
+abort:
+	tcpm_log(port, "SVID_DISCOVERY_MAX(%d) too low!", SVID_DISCOVERY_MAX);
+	return false;
+}
+
+static void svdm_consume_modes(struct tcpm_port *port, const u32 *p, int cnt)
+{
+	struct pd_mode_data *pmdata = &port->mode_data;
+	struct typec_altmode_desc *paltmode;
+	int i;
+
+	if (pmdata->altmodes >= ARRAY_SIZE(port->partner_altmode)) {
+		/* Already logged in svdm_consume_svids() */
+		return;
+	}
+
+	for (i = 1; i < cnt; i++) {
+		paltmode = &pmdata->altmode_desc[pmdata->altmodes];
+		memset(paltmode, 0, sizeof(*paltmode));
+
+		paltmode->svid = pmdata->svids[pmdata->svid_index];
+		paltmode->mode = i;
+		paltmode->vdo = p[i];
+
+		tcpm_log(port, " Alternate mode %d: SVID 0x%04x, VDO %d: 0x%08x",
+			 pmdata->altmodes, paltmode->svid,
+			 paltmode->mode, paltmode->vdo);
+
+		pmdata->altmodes++;
+	}
+}
+
+static void tcpm_register_partner_altmodes(struct tcpm_port *port)
+{
+	struct pd_mode_data *modep = &port->mode_data;
+	struct typec_altmode *altmode;
+	int i;
+
+	for (i = 0; i < modep->altmodes; i++) {
+		altmode = typec_partner_register_altmode(port->partner,
+						&modep->altmode_desc[i]);
+		if (IS_ERR(altmode)) {
+			tcpm_log(port, "Failed to register partner SVID 0x%04x",
+				 modep->altmode_desc[i].svid);
+			altmode = NULL;
+		}
+		port->partner_altmode[i] = altmode;
+	}
+}
+
+#define supports_modal(port)	PD_IDH_MODAL_SUPP((port)->partner_ident.id_header)
+
+static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev,
+			const u32 *p, int cnt, u32 *response,
+			enum adev_actions *adev_action)
+{
+	struct typec_port *typec = port->typec_port;
+	struct typec_altmode *pdev;
+	struct pd_mode_data *modep;
+	int svdm_version;
+	int rlen = 0;
+	int cmd_type;
+	int cmd;
+	int i;
+
+	cmd_type = PD_VDO_CMDT(p[0]);
+	cmd = PD_VDO_CMD(p[0]);
+
+	tcpm_log(port, "Rx VDM cmd 0x%x type %d cmd %d len %d",
+		 p[0], cmd_type, cmd, cnt);
+
+	modep = &port->mode_data;
+
+	pdev = typec_match_altmode(port->partner_altmode, ALTMODE_DISCOVERY_MAX,
+				   PD_VDO_VID(p[0]), PD_VDO_OPOS(p[0]));
+
+	svdm_version = typec_get_negotiated_svdm_version(typec);
+	if (svdm_version < 0)
+		return 0;
+
+	switch (cmd_type) {
+	case CMDT_INIT:
+		switch (cmd) {
+		case CMD_DISCOVER_IDENT:
+			if (PD_VDO_VID(p[0]) != USB_SID_PD)
+				break;
+
+			if (IS_ERR_OR_NULL(port->partner))
+				break;
+
+			if (PD_VDO_SVDM_VER(p[0]) < svdm_version) {
+				typec_partner_set_svdm_version(port->partner,
+							       PD_VDO_SVDM_VER(p[0]));
+				svdm_version = PD_VDO_SVDM_VER(p[0]);
+			}
+
+			port->ams = DISCOVER_IDENTITY;
+			/*
+			 * PD2.0 Spec 6.10.3: respond with NAK as DFP (data host)
+			 * PD3.1 Spec 6.4.4.2.5.1: respond with NAK if "invalid field" or
+			 * "wrong configuation" or "Unrecognized"
+			 */
+			if ((port->data_role == TYPEC_DEVICE || svdm_version >= SVDM_VER_2_0) &&
+			    port->nr_snk_vdo) {
+				if (svdm_version < SVDM_VER_2_0) {
+					for (i = 0; i < port->nr_snk_vdo_v1; i++)
+						response[i + 1] = port->snk_vdo_v1[i];
+					rlen = port->nr_snk_vdo_v1 + 1;
+
+				} else {
+					for (i = 0; i < port->nr_snk_vdo; i++)
+						response[i + 1] = port->snk_vdo[i];
+					rlen = port->nr_snk_vdo + 1;
+				}
+			}
+			break;
+		case CMD_DISCOVER_SVID:
+			port->ams = DISCOVER_SVIDS;
+			break;
+		case CMD_DISCOVER_MODES:
+			port->ams = DISCOVER_MODES;
+			break;
+		case CMD_ENTER_MODE:
+			port->ams = DFP_TO_UFP_ENTER_MODE;
+			break;
+		case CMD_EXIT_MODE:
+			port->ams = DFP_TO_UFP_EXIT_MODE;
+			break;
+		case CMD_ATTENTION:
+			/* Attention command does not have response */
+			*adev_action = ADEV_ATTENTION;
+			return 0;
+		default:
+			break;
+		}
+		if (rlen >= 1) {
+			response[0] = p[0] | VDO_CMDT(CMDT_RSP_ACK);
+		} else if (rlen == 0) {
+			response[0] = p[0] | VDO_CMDT(CMDT_RSP_NAK);
+			rlen = 1;
+		} else {
+			response[0] = p[0] | VDO_CMDT(CMDT_RSP_BUSY);
+			rlen = 1;
+		}
+		response[0] = (response[0] & ~VDO_SVDM_VERS_MASK) |
+			      (VDO_SVDM_VERS(typec_get_negotiated_svdm_version(typec)));
+		break;
+	case CMDT_RSP_ACK:
+		/* silently drop message if we are not connected */
+		if (IS_ERR_OR_NULL(port->partner))
+			break;
+
+		tcpm_ams_finish(port);
+
+		switch (cmd) {
+		case CMD_DISCOVER_IDENT:
+			if (PD_VDO_SVDM_VER(p[0]) < svdm_version)
+				typec_partner_set_svdm_version(port->partner,
+							       PD_VDO_SVDM_VER(p[0]));
+			/* 6.4.4.3.1 */
+			svdm_consume_identity(port, p, cnt);
+			response[0] = VDO(USB_SID_PD, 1, typec_get_negotiated_svdm_version(typec),
+					  CMD_DISCOVER_SVID);
+			rlen = 1;
+			break;
+		case CMD_DISCOVER_SVID:
+			/* 6.4.4.3.2 */
+			if (svdm_consume_svids(port, p, cnt)) {
+				response[0] = VDO(USB_SID_PD, 1, svdm_version, CMD_DISCOVER_SVID);
+				rlen = 1;
+			} else if (modep->nsvids && supports_modal(port)) {
+				response[0] = VDO(modep->svids[0], 1, svdm_version,
+						  CMD_DISCOVER_MODES);
+				rlen = 1;
+			}
+			break;
+		case CMD_DISCOVER_MODES:
+			/* 6.4.4.3.3 */
+			svdm_consume_modes(port, p, cnt);
+			modep->svid_index++;
+			if (modep->svid_index < modep->nsvids) {
+				u16 svid = modep->svids[modep->svid_index];
+				response[0] = VDO(svid, 1, svdm_version, CMD_DISCOVER_MODES);
+				rlen = 1;
+			} else {
+				tcpm_register_partner_altmodes(port);
+			}
+			break;
+		case CMD_ENTER_MODE:
+			if (adev && pdev) {
+				typec_altmode_update_active(pdev, true);
+				*adev_action = ADEV_QUEUE_VDM_SEND_EXIT_MODE_ON_FAIL;
+			}
+			return 0;
+		case CMD_EXIT_MODE:
+			if (adev && pdev) {
+				typec_altmode_update_active(pdev, false);
+				/* Back to USB Operation */
+				*adev_action = ADEV_NOTIFY_USB_AND_QUEUE_VDM;
+				return 0;
+			}
+			break;
+		case VDO_CMD_VENDOR(0) ... VDO_CMD_VENDOR(15):
+			break;
+		default:
+			/* Unrecognized SVDM */
+			response[0] = p[0] | VDO_CMDT(CMDT_RSP_NAK);
+			rlen = 1;
+			response[0] = (response[0] & ~VDO_SVDM_VERS_MASK) |
+				      (VDO_SVDM_VERS(svdm_version));
+			break;
+		}
+		break;
+	case CMDT_RSP_NAK:
+		tcpm_ams_finish(port);
+		switch (cmd) {
+		case CMD_DISCOVER_IDENT:
+		case CMD_DISCOVER_SVID:
+		case CMD_DISCOVER_MODES:
+		case VDO_CMD_VENDOR(0) ... VDO_CMD_VENDOR(15):
+			break;
+		case CMD_ENTER_MODE:
+			/* Back to USB Operation */
+			*adev_action = ADEV_NOTIFY_USB_AND_QUEUE_VDM;
+			return 0;
+		default:
+			/* Unrecognized SVDM */
+			response[0] = p[0] | VDO_CMDT(CMDT_RSP_NAK);
+			rlen = 1;
+			response[0] = (response[0] & ~VDO_SVDM_VERS_MASK) |
+				      (VDO_SVDM_VERS(svdm_version));
+			break;
+		}
+		break;
+	default:
+		response[0] = p[0] | VDO_CMDT(CMDT_RSP_NAK);
+		rlen = 1;
+		response[0] = (response[0] & ~VDO_SVDM_VERS_MASK) |
+			      (VDO_SVDM_VERS(svdm_version));
+		break;
+	}
+
+	/* Informing the alternate mode drivers about everything */
+	*adev_action = ADEV_QUEUE_VDM;
+	return rlen;
+}
+
+static void tcpm_pd_handle_msg(struct tcpm_port *port,
+			       enum pd_msg_request message,
+			       enum tcpm_ams ams);
+
+static void tcpm_handle_vdm_request(struct tcpm_port *port,
+				    const __le32 *payload, int cnt)
+{
+	enum adev_actions adev_action = ADEV_NONE;
+	struct typec_altmode *adev;
+	u32 p[PD_MAX_PAYLOAD];
+	u32 response[8] = { };
+	int i, rlen = 0;
+
+	for (i = 0; i < cnt; i++)
+		p[i] = le32_to_cpu(payload[i]);
+
+	adev = typec_match_altmode(port->port_altmode, ALTMODE_DISCOVERY_MAX,
+				   PD_VDO_VID(p[0]), PD_VDO_OPOS(p[0]));
+
+	if (port->vdm_state == VDM_STATE_BUSY) {
+		/* If UFP responded busy retry after timeout */
+		if (PD_VDO_CMDT(p[0]) == CMDT_RSP_BUSY) {
+			port->vdm_state = VDM_STATE_WAIT_RSP_BUSY;
+			port->vdo_retry = (p[0] & ~VDO_CMDT_MASK) |
+				CMDT_INIT;
+			mod_vdm_delayed_work(port, PD_T_VDM_BUSY);
+			return;
+		}
+		port->vdm_state = VDM_STATE_DONE;
+	}
+
+	if (PD_VDO_SVDM(p[0]) && (adev || tcpm_vdm_ams(port) || port->nr_snk_vdo)) {
+		/*
+		 * Here a SVDM is received (INIT or RSP or unknown). Set the vdm_sm_running in
+		 * advance because we are dropping the lock but may send VDMs soon.
+		 * For the cases of INIT received:
+		 *  - If no response to send, it will be cleared later in this function.
+		 *  - If there are responses to send, it will be cleared in the state machine.
+		 * For the cases of RSP received:
+		 *  - If no further INIT to send, it will be cleared later in this function.
+		 *  - Otherwise, it will be cleared in the state machine if timeout or it will go
+		 *    back here until no further INIT to send.
+		 * For the cases of unknown type received:
+		 *  - We will send NAK and the flag will be cleared in the state machine.
+		 */
+		port->vdm_sm_running = true;
+		rlen = tcpm_pd_svdm(port, adev, p, cnt, response, &adev_action);
+	} else {
+		if (port->negotiated_rev >= PD_REV30)
+			tcpm_pd_handle_msg(port, PD_MSG_CTRL_NOT_SUPP, NONE_AMS);
+	}
+
+	/*
+	 * We are done with any state stored in the port struct now, except
+	 * for any port struct changes done by the tcpm_queue_vdm() call
+	 * below, which is a separate operation.
+	 *
+	 * So we can safely release the lock here; and we MUST release the
+	 * lock here to avoid an AB BA lock inversion:
+	 *
+	 * If we keep the lock here then the lock ordering in this path is:
+	 * 1. tcpm_pd_rx_handler take the tcpm port lock
+	 * 2. One of the typec_altmode_* calls below takes the alt-mode's lock
+	 *
+	 * And we also have this ordering:
+	 * 1. alt-mode driver takes the alt-mode's lock
+	 * 2. alt-mode driver calls tcpm_altmode_enter which takes the
+	 *    tcpm port lock
+	 *
+	 * Dropping our lock here avoids this.
+	 */
+	mutex_unlock(&port->lock);
+
+	if (adev) {
+		switch (adev_action) {
+		case ADEV_NONE:
+			break;
+		case ADEV_NOTIFY_USB_AND_QUEUE_VDM:
+			WARN_ON(typec_altmode_notify(adev, TYPEC_STATE_USB, NULL));
+			typec_altmode_vdm(adev, p[0], &p[1], cnt);
+			break;
+		case ADEV_QUEUE_VDM:
+			typec_altmode_vdm(adev, p[0], &p[1], cnt);
+			break;
+		case ADEV_QUEUE_VDM_SEND_EXIT_MODE_ON_FAIL:
+			if (typec_altmode_vdm(adev, p[0], &p[1], cnt)) {
+				int svdm_version = typec_get_negotiated_svdm_version(
+									port->typec_port);
+				if (svdm_version < 0)
+					break;
+
+				response[0] = VDO(adev->svid, 1, svdm_version,
+						  CMD_EXIT_MODE);
+				response[0] |= VDO_OPOS(adev->mode);
+				rlen = 1;
+			}
+			break;
+		case ADEV_ATTENTION:
+			if (typec_altmode_attention(adev, p[1]))
+				tcpm_log(port, "typec_altmode_attention no port partner altmode");
+			break;
+		}
+	}
+
+	/*
+	 * We must re-take the lock here to balance the unlock in
+	 * tcpm_pd_rx_handler, note that no changes, other then the
+	 * tcpm_queue_vdm call, are made while the lock is held again.
+	 * All that is done after the call is unwinding the call stack until
+	 * we return to tcpm_pd_rx_handler and do the unlock there.
+	 */
+	mutex_lock(&port->lock);
+
+	if (rlen > 0)
+		tcpm_queue_vdm(port, response[0], &response[1], rlen - 1);
+	else
+		port->vdm_sm_running = false;
+}
+
+static void tcpm_send_vdm(struct tcpm_port *port, u32 vid, int cmd,
+			  const u32 *data, int count)
+{
+	int svdm_version = typec_get_negotiated_svdm_version(port->typec_port);
+	u32 header;
+
+	if (svdm_version < 0)
+		return;
+
+	if (WARN_ON(count > VDO_MAX_SIZE - 1))
+		count = VDO_MAX_SIZE - 1;
+
+	/* set VDM header with VID & CMD */
+	header = VDO(vid, ((vid & USB_SID_PD) == USB_SID_PD) ?
+			1 : (PD_VDO_CMD(cmd) <= CMD_ATTENTION),
+			svdm_version, cmd);
+	tcpm_queue_vdm(port, header, data, count);
+}
+
+static unsigned int vdm_ready_timeout(u32 vdm_hdr)
+{
+	unsigned int timeout;
+	int cmd = PD_VDO_CMD(vdm_hdr);
+
+	/* its not a structured VDM command */
+	if (!PD_VDO_SVDM(vdm_hdr))
+		return PD_T_VDM_UNSTRUCTURED;
+
+	switch (PD_VDO_CMDT(vdm_hdr)) {
+	case CMDT_INIT:
+		if (cmd == CMD_ENTER_MODE || cmd == CMD_EXIT_MODE)
+			timeout = PD_T_VDM_WAIT_MODE_E;
+		else
+			timeout = PD_T_VDM_SNDR_RSP;
+		break;
+	default:
+		if (cmd == CMD_ENTER_MODE || cmd == CMD_EXIT_MODE)
+			timeout = PD_T_VDM_E_MODE;
+		else
+			timeout = PD_T_VDM_RCVR_RSP;
+		break;
+	}
+	return timeout;
+}
+
+static void vdm_run_state_machine(struct tcpm_port *port)
+{
+	struct pd_message msg;
+	int i, res = 0;
+	u32 vdo_hdr = port->vdo_data[0];
+
+	switch (port->vdm_state) {
+	case VDM_STATE_READY:
+		/* Only transmit VDM if attached */
+		if (!port->attached) {
+			port->vdm_state = VDM_STATE_ERR_BUSY;
+			break;
+		}
+
+		/*
+		 * if there's traffic or we're not in PDO ready state don't send
+		 * a VDM.
+		 */
+		if (port->state != SRC_READY && port->state != SNK_READY) {
+			port->vdm_sm_running = false;
+			break;
+		}
+
+		/* TODO: AMS operation for Unstructured VDM */
+		if (PD_VDO_SVDM(vdo_hdr) && PD_VDO_CMDT(vdo_hdr) == CMDT_INIT) {
+			switch (PD_VDO_CMD(vdo_hdr)) {
+			case CMD_DISCOVER_IDENT:
+				res = tcpm_ams_start(port, DISCOVER_IDENTITY);
+				if (res == 0) {
+					port->send_discover = false;
+				} else if (res == -EAGAIN) {
+					port->vdo_data[0] = 0;
+					mod_send_discover_delayed_work(port,
+								       SEND_DISCOVER_RETRY_MS);
+				}
+				break;
+			case CMD_DISCOVER_SVID:
+				res = tcpm_ams_start(port, DISCOVER_SVIDS);
+				break;
+			case CMD_DISCOVER_MODES:
+				res = tcpm_ams_start(port, DISCOVER_MODES);
+				break;
+			case CMD_ENTER_MODE:
+				res = tcpm_ams_start(port, DFP_TO_UFP_ENTER_MODE);
+				break;
+			case CMD_EXIT_MODE:
+				res = tcpm_ams_start(port, DFP_TO_UFP_EXIT_MODE);
+				break;
+			case CMD_ATTENTION:
+				res = tcpm_ams_start(port, ATTENTION);
+				break;
+			case VDO_CMD_VENDOR(0) ... VDO_CMD_VENDOR(15):
+				res = tcpm_ams_start(port, STRUCTURED_VDMS);
+				break;
+			default:
+				res = -EOPNOTSUPP;
+				break;
+			}
+
+			if (res < 0) {
+				port->vdm_state = VDM_STATE_ERR_BUSY;
+				return;
+			}
+		}
+
+		port->vdm_state = VDM_STATE_SEND_MESSAGE;
+		mod_vdm_delayed_work(port, (port->negotiated_rev >= PD_REV30 &&
+					    port->pwr_role == TYPEC_SOURCE &&
+					    PD_VDO_SVDM(vdo_hdr) &&
+					    PD_VDO_CMDT(vdo_hdr) == CMDT_INIT) ?
+					   PD_T_SINK_TX : 0);
+		break;
+	case VDM_STATE_WAIT_RSP_BUSY:
+		port->vdo_data[0] = port->vdo_retry;
+		port->vdo_count = 1;
+		port->vdm_state = VDM_STATE_READY;
+		tcpm_ams_finish(port);
+		break;
+	case VDM_STATE_BUSY:
+		port->vdm_state = VDM_STATE_ERR_TMOUT;
+		if (port->ams != NONE_AMS)
+			tcpm_ams_finish(port);
+		break;
+	case VDM_STATE_ERR_SEND:
+		/*
+		 * A partner which does not support USB PD will not reply,
+		 * so this is not a fatal error. At the same time, some
+		 * devices may not return GoodCRC under some circumstances,
+		 * so we need to retry.
+		 */
+		if (port->vdm_retries < 3) {
+			tcpm_log(port, "VDM Tx error, retry");
+			port->vdm_retries++;
+			port->vdm_state = VDM_STATE_READY;
+			if (PD_VDO_SVDM(vdo_hdr) && PD_VDO_CMDT(vdo_hdr) == CMDT_INIT)
+				tcpm_ams_finish(port);
+		} else {
+			tcpm_ams_finish(port);
+		}
+		break;
+	case VDM_STATE_SEND_MESSAGE:
+		/* Prepare and send VDM */
+		memset(&msg, 0, sizeof(msg));
+		msg.header = PD_HEADER_LE(PD_DATA_VENDOR_DEF,
+					  port->pwr_role,
+					  port->data_role,
+					  port->negotiated_rev,
+					  port->message_id, port->vdo_count);
+		for (i = 0; i < port->vdo_count; i++)
+			msg.payload[i] = cpu_to_le32(port->vdo_data[i]);
+		res = tcpm_pd_transmit(port, TCPC_TX_SOP, &msg);
+		if (res < 0) {
+			port->vdm_state = VDM_STATE_ERR_SEND;
+		} else {
+			unsigned long timeout;
+
+			port->vdm_retries = 0;
+			port->vdo_data[0] = 0;
+			port->vdm_state = VDM_STATE_BUSY;
+			timeout = vdm_ready_timeout(vdo_hdr);
+			mod_vdm_delayed_work(port, timeout);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static void vdm_state_machine_work(struct kthread_work *work)
+{
+	struct tcpm_port *port = container_of(work, struct tcpm_port, vdm_state_machine);
+	enum vdm_states prev_state;
+
+	mutex_lock(&port->lock);
+
+	/*
+	 * Continue running as long as the port is not busy and there was
+	 * a state change.
+	 */
+	do {
+		prev_state = port->vdm_state;
+		vdm_run_state_machine(port);
+	} while (port->vdm_state != prev_state &&
+		 port->vdm_state != VDM_STATE_BUSY &&
+		 port->vdm_state != VDM_STATE_SEND_MESSAGE);
+
+	if (port->vdm_state < VDM_STATE_READY)
+		port->vdm_sm_running = false;
+
+	mutex_unlock(&port->lock);
+}
+
+enum pdo_err {
+	PDO_NO_ERR,
+	PDO_ERR_NO_VSAFE5V,
+	PDO_ERR_VSAFE5V_NOT_FIRST,
+	PDO_ERR_PDO_TYPE_NOT_IN_ORDER,
+	PDO_ERR_FIXED_NOT_SORTED,
+	PDO_ERR_VARIABLE_BATT_NOT_SORTED,
+	PDO_ERR_DUPE_PDO,
+	PDO_ERR_PPS_APDO_NOT_SORTED,
+	PDO_ERR_DUPE_PPS_APDO,
+};
+
+static const char * const pdo_err_msg[] = {
+	[PDO_ERR_NO_VSAFE5V] =
+	" err: source/sink caps should at least have vSafe5V",
+	[PDO_ERR_VSAFE5V_NOT_FIRST] =
+	" err: vSafe5V Fixed Supply Object Shall always be the first object",
+	[PDO_ERR_PDO_TYPE_NOT_IN_ORDER] =
+	" err: PDOs should be in the following order: Fixed; Battery; Variable",
+	[PDO_ERR_FIXED_NOT_SORTED] =
+	" err: Fixed supply pdos should be in increasing order of their fixed voltage",
+	[PDO_ERR_VARIABLE_BATT_NOT_SORTED] =
+	" err: Variable/Battery supply pdos should be in increasing order of their minimum voltage",
+	[PDO_ERR_DUPE_PDO] =
+	" err: Variable/Batt supply pdos cannot have same min/max voltage",
+	[PDO_ERR_PPS_APDO_NOT_SORTED] =
+	" err: Programmable power supply apdos should be in increasing order of their maximum voltage",
+	[PDO_ERR_DUPE_PPS_APDO] =
+	" err: Programmable power supply apdos cannot have same min/max voltage and max current",
+};
+
+static enum pdo_err tcpm_caps_err(struct tcpm_port *port, const u32 *pdo,
+				  unsigned int nr_pdo)
+{
+	unsigned int i;
+
+	/* Should at least contain vSafe5v */
+	if (nr_pdo < 1)
+		return PDO_ERR_NO_VSAFE5V;
+
+	/* The vSafe5V Fixed Supply Object Shall always be the first object */
+	if (pdo_type(pdo[0]) != PDO_TYPE_FIXED ||
+	    pdo_fixed_voltage(pdo[0]) != VSAFE5V)
+		return PDO_ERR_VSAFE5V_NOT_FIRST;
+
+	for (i = 1; i < nr_pdo; i++) {
+		if (pdo_type(pdo[i]) < pdo_type(pdo[i - 1])) {
+			return PDO_ERR_PDO_TYPE_NOT_IN_ORDER;
+		} else if (pdo_type(pdo[i]) == pdo_type(pdo[i - 1])) {
+			enum pd_pdo_type type = pdo_type(pdo[i]);
+
+			switch (type) {
+			/*
+			 * The remaining Fixed Supply Objects, if
+			 * present, shall be sent in voltage order;
+			 * lowest to highest.
+			 */
+			case PDO_TYPE_FIXED:
+				if (pdo_fixed_voltage(pdo[i]) <=
+				    pdo_fixed_voltage(pdo[i - 1]))
+					return PDO_ERR_FIXED_NOT_SORTED;
+				break;
+			/*
+			 * The Battery Supply Objects and Variable
+			 * supply, if present shall be sent in Minimum
+			 * Voltage order; lowest to highest.
+			 */
+			case PDO_TYPE_VAR:
+			case PDO_TYPE_BATT:
+				if (pdo_min_voltage(pdo[i]) <
+				    pdo_min_voltage(pdo[i - 1]))
+					return PDO_ERR_VARIABLE_BATT_NOT_SORTED;
+				else if ((pdo_min_voltage(pdo[i]) ==
+					  pdo_min_voltage(pdo[i - 1])) &&
+					 (pdo_max_voltage(pdo[i]) ==
+					  pdo_max_voltage(pdo[i - 1])))
+					return PDO_ERR_DUPE_PDO;
+				break;
+			/*
+			 * The Programmable Power Supply APDOs, if present,
+			 * shall be sent in Maximum Voltage order;
+			 * lowest to highest.
+			 */
+			case PDO_TYPE_APDO:
+				if (pdo_apdo_type(pdo[i]) != APDO_TYPE_PPS)
+					break;
+
+				if (pdo_pps_apdo_max_voltage(pdo[i]) <
+				    pdo_pps_apdo_max_voltage(pdo[i - 1]))
+					return PDO_ERR_PPS_APDO_NOT_SORTED;
+				else if (pdo_pps_apdo_min_voltage(pdo[i]) ==
+					  pdo_pps_apdo_min_voltage(pdo[i - 1]) &&
+					 pdo_pps_apdo_max_voltage(pdo[i]) ==
+					  pdo_pps_apdo_max_voltage(pdo[i - 1]) &&
+					 pdo_pps_apdo_max_current(pdo[i]) ==
+					  pdo_pps_apdo_max_current(pdo[i - 1]))
+					return PDO_ERR_DUPE_PPS_APDO;
+				break;
+			default:
+				tcpm_log_force(port, " Unknown pdo type");
+			}
+		}
+	}
+
+	return PDO_NO_ERR;
+}
+
+static int tcpm_validate_caps(struct tcpm_port *port, const u32 *pdo,
+			      unsigned int nr_pdo)
+{
+	enum pdo_err err_index = tcpm_caps_err(port, pdo, nr_pdo);
+
+	if (err_index != PDO_NO_ERR) {
+		tcpm_log_force(port, " %s", pdo_err_msg[err_index]);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int tcpm_altmode_enter(struct typec_altmode *altmode, u32 *vdo)
+{
+	struct tcpm_port *port = typec_altmode_get_drvdata(altmode);
+	int svdm_version;
+	u32 header;
+
+	svdm_version = typec_get_negotiated_svdm_version(port->typec_port);
+	if (svdm_version < 0)
+		return svdm_version;
+
+	header = VDO(altmode->svid, vdo ? 2 : 1, svdm_version, CMD_ENTER_MODE);
+	header |= VDO_OPOS(altmode->mode);
+
+	tcpm_queue_vdm_unlocked(port, header, vdo, vdo ? 1 : 0);
+	return 0;
+}
+
+static int tcpm_altmode_exit(struct typec_altmode *altmode)
+{
+	struct tcpm_port *port = typec_altmode_get_drvdata(altmode);
+	int svdm_version;
+	u32 header;
+
+	svdm_version = typec_get_negotiated_svdm_version(port->typec_port);
+	if (svdm_version < 0)
+		return svdm_version;
+
+	header = VDO(altmode->svid, 1, svdm_version, CMD_EXIT_MODE);
+	header |= VDO_OPOS(altmode->mode);
+
+	tcpm_queue_vdm_unlocked(port, header, NULL, 0);
+	return 0;
+}
+
+static int tcpm_altmode_vdm(struct typec_altmode *altmode,
+			    u32 header, const u32 *data, int count)
+{
+	struct tcpm_port *port = typec_altmode_get_drvdata(altmode);
+
+	tcpm_queue_vdm_unlocked(port, header, data, count - 1);
+
+	return 0;
+}
+
+static const struct typec_altmode_ops tcpm_altmode_ops = {
+	.enter = tcpm_altmode_enter,
+	.exit = tcpm_altmode_exit,
+	.vdm = tcpm_altmode_vdm,
+};
+
+/*
+ * PD (data, control) command handling functions
+ */
+static inline enum tcpm_state ready_state(struct tcpm_port *port)
+{
+	if (port->pwr_role == TYPEC_SOURCE)
+		return SRC_READY;
+	else
+		return SNK_READY;
+}
+
+static int tcpm_pd_send_control(struct tcpm_port *port,
+				enum pd_ctrl_msg_type type);
+
+static void tcpm_handle_alert(struct tcpm_port *port, const __le32 *payload,
+			      int cnt)
+{
+	u32 p0 = le32_to_cpu(payload[0]);
+	unsigned int type = usb_pd_ado_type(p0);
+
+	if (!type) {
+		tcpm_log(port, "Alert message received with no type");
+		tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP);
+		return;
+	}
+
+	/* Just handling non-battery alerts for now */
+	if (!(type & USB_PD_ADO_TYPE_BATT_STATUS_CHANGE)) {
+		if (port->pwr_role == TYPEC_SOURCE) {
+			port->upcoming_state = GET_STATUS_SEND;
+			tcpm_ams_start(port, GETTING_SOURCE_SINK_STATUS);
+		} else {
+			/*
+			 * Do not check SinkTxOk here in case the Source doesn't set its Rp to
+			 * SinkTxOk in time.
+			 */
+			port->ams = GETTING_SOURCE_SINK_STATUS;
+			tcpm_set_state(port, GET_STATUS_SEND, 0);
+		}
+	} else {
+		tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP);
+	}
+}
+
+static int tcpm_set_auto_vbus_discharge_threshold(struct tcpm_port *port,
+						  enum typec_pwr_opmode mode, bool pps_active,
+						  u32 requested_vbus_voltage)
+{
+	int ret;
+
+	if (!port->tcpc->set_auto_vbus_discharge_threshold)
+		return 0;
+
+	ret = port->tcpc->set_auto_vbus_discharge_threshold(port->tcpc, mode, pps_active,
+							    requested_vbus_voltage);
+	tcpm_log_force(port,
+		       "set_auto_vbus_discharge_threshold mode:%d pps_active:%c vbus:%u ret:%d",
+		       mode, pps_active ? 'y' : 'n', requested_vbus_voltage, ret);
+
+	return ret;
+}
+
+static void tcpm_pd_handle_state(struct tcpm_port *port,
+				 enum tcpm_state state,
+				 enum tcpm_ams ams,
+				 unsigned int delay_ms)
+{
+	switch (port->state) {
+	case SRC_READY:
+	case SNK_READY:
+		port->ams = ams;
+		tcpm_set_state(port, state, delay_ms);
+		break;
+	/* 8.3.3.4.1.1 and 6.8.1 power transitioning */
+	case SNK_TRANSITION_SINK:
+	case SNK_TRANSITION_SINK_VBUS:
+	case SRC_TRANSITION_SUPPLY:
+		tcpm_set_state(port, HARD_RESET_SEND, 0);
+		break;
+	default:
+		if (!tcpm_ams_interruptible(port)) {
+			tcpm_set_state(port, port->pwr_role == TYPEC_SOURCE ?
+				       SRC_SOFT_RESET_WAIT_SNK_TX :
+				       SNK_SOFT_RESET,
+				       0);
+		} else {
+			/* process the Message 6.8.1 */
+			port->upcoming_state = state;
+			port->next_ams = ams;
+			tcpm_set_state(port, ready_state(port), delay_ms);
+		}
+		break;
+	}
+}
+
+static void tcpm_pd_handle_msg(struct tcpm_port *port,
+			       enum pd_msg_request message,
+			       enum tcpm_ams ams)
+{
+	switch (port->state) {
+	case SRC_READY:
+	case SNK_READY:
+		port->ams = ams;
+		tcpm_queue_message(port, message);
+		break;
+	/* PD 3.0 Spec 8.3.3.4.1.1 and 6.8.1 */
+	case SNK_TRANSITION_SINK:
+	case SNK_TRANSITION_SINK_VBUS:
+	case SRC_TRANSITION_SUPPLY:
+		tcpm_set_state(port, HARD_RESET_SEND, 0);
+		break;
+	default:
+		if (!tcpm_ams_interruptible(port)) {
+			tcpm_set_state(port, port->pwr_role == TYPEC_SOURCE ?
+				       SRC_SOFT_RESET_WAIT_SNK_TX :
+				       SNK_SOFT_RESET,
+				       0);
+		} else {
+			port->next_ams = ams;
+			tcpm_set_state(port, ready_state(port), 0);
+			/* 6.8.1 process the Message */
+			tcpm_queue_message(port, message);
+		}
+		break;
+	}
+}
+
+static int tcpm_register_source_caps(struct tcpm_port *port)
+{
+	struct usb_power_delivery_desc desc = { port->negotiated_rev };
+	struct usb_power_delivery_capabilities_desc caps = { };
+	struct usb_power_delivery_capabilities *cap;
+
+	if (!port->partner_pd)
+		port->partner_pd = usb_power_delivery_register(NULL, &desc);
+	if (IS_ERR(port->partner_pd))
+		return PTR_ERR(port->partner_pd);
+
+	memcpy(caps.pdo, port->source_caps, sizeof(u32) * port->nr_source_caps);
+	caps.role = TYPEC_SOURCE;
+
+	cap = usb_power_delivery_register_capabilities(port->partner_pd, &caps);
+	if (IS_ERR(cap))
+		return PTR_ERR(cap);
+
+	port->partner_source_caps = cap;
+
+	return 0;
+}
+
+static int tcpm_register_sink_caps(struct tcpm_port *port)
+{
+	struct usb_power_delivery_desc desc = { port->negotiated_rev };
+	struct usb_power_delivery_capabilities_desc caps = { };
+	struct usb_power_delivery_capabilities *cap;
+
+	if (!port->partner_pd)
+		port->partner_pd = usb_power_delivery_register(NULL, &desc);
+	if (IS_ERR(port->partner_pd))
+		return PTR_ERR(port->partner_pd);
+
+	memcpy(caps.pdo, port->sink_caps, sizeof(u32) * port->nr_sink_caps);
+	caps.role = TYPEC_SINK;
+
+	cap = usb_power_delivery_register_capabilities(port->partner_pd, &caps);
+	if (IS_ERR(cap))
+		return PTR_ERR(cap);
+
+	port->partner_sink_caps = cap;
+
+	return 0;
+}
+
+static void tcpm_pd_data_request(struct tcpm_port *port,
+				 const struct pd_message *msg)
+{
+	enum pd_data_msg_type type = pd_header_type_le(msg->header);
+	unsigned int cnt = pd_header_cnt_le(msg->header);
+	unsigned int rev = pd_header_rev_le(msg->header);
+	unsigned int i;
+	enum frs_typec_current partner_frs_current;
+	bool frs_enable;
+	int ret;
+
+	if (tcpm_vdm_ams(port) && type != PD_DATA_VENDOR_DEF) {
+		port->vdm_state = VDM_STATE_ERR_BUSY;
+		tcpm_ams_finish(port);
+		mod_vdm_delayed_work(port, 0);
+	}
+
+	switch (type) {
+	case PD_DATA_SOURCE_CAP:
+		for (i = 0; i < cnt; i++)
+			port->source_caps[i] = le32_to_cpu(msg->payload[i]);
+
+		port->nr_source_caps = cnt;
+
+		tcpm_log_source_caps(port);
+
+		tcpm_validate_caps(port, port->source_caps,
+				   port->nr_source_caps);
+
+		tcpm_register_source_caps(port);
+
+		/*
+		 * Adjust revision in subsequent message headers, as required,
+		 * to comply with 6.2.1.1.5 of the USB PD 3.0 spec. We don't
+		 * support Rev 1.0 so just do nothing in that scenario.
+		 */
+		if (rev == PD_REV10) {
+			if (port->ams == GET_SOURCE_CAPABILITIES)
+				tcpm_ams_finish(port);
+			break;
+		}
+
+		if (rev < PD_MAX_REV)
+			port->negotiated_rev = rev;
+
+		if (port->pwr_role == TYPEC_SOURCE) {
+			if (port->ams == GET_SOURCE_CAPABILITIES)
+				tcpm_pd_handle_state(port, SRC_READY, NONE_AMS, 0);
+			/* Unexpected Source Capabilities */
+			else
+				tcpm_pd_handle_msg(port,
+						   port->negotiated_rev < PD_REV30 ?
+						   PD_MSG_CTRL_REJECT :
+						   PD_MSG_CTRL_NOT_SUPP,
+						   NONE_AMS);
+		} else if (port->state == SNK_WAIT_CAPABILITIES) {
+		/*
+		 * This message may be received even if VBUS is not
+		 * present. This is quite unexpected; see USB PD
+		 * specification, sections 8.3.3.6.3.1 and 8.3.3.6.3.2.
+		 * However, at the same time, we must be ready to
+		 * receive this message and respond to it 15ms after
+		 * receiving PS_RDY during power swap operations, no matter
+		 * if VBUS is available or not (USB PD specification,
+		 * section 6.5.9.2).
+		 * So we need to accept the message either way,
+		 * but be prepared to keep waiting for VBUS after it was
+		 * handled.
+		 */
+			port->ams = POWER_NEGOTIATION;
+			port->in_ams = true;
+			tcpm_set_state(port, SNK_NEGOTIATE_CAPABILITIES, 0);
+		} else {
+			if (port->ams == GET_SOURCE_CAPABILITIES)
+				tcpm_ams_finish(port);
+			tcpm_pd_handle_state(port, SNK_NEGOTIATE_CAPABILITIES,
+					     POWER_NEGOTIATION, 0);
+		}
+		break;
+	case PD_DATA_REQUEST:
+		/*
+		 * Adjust revision in subsequent message headers, as required,
+		 * to comply with 6.2.1.1.5 of the USB PD 3.0 spec. We don't
+		 * support Rev 1.0 so just reject in that scenario.
+		 */
+		if (rev == PD_REV10) {
+			tcpm_pd_handle_msg(port,
+					   port->negotiated_rev < PD_REV30 ?
+					   PD_MSG_CTRL_REJECT :
+					   PD_MSG_CTRL_NOT_SUPP,
+					   NONE_AMS);
+			break;
+		}
+
+		if (rev < PD_MAX_REV)
+			port->negotiated_rev = rev;
+
+		if (port->pwr_role != TYPEC_SOURCE || cnt != 1) {
+			tcpm_pd_handle_msg(port,
+					   port->negotiated_rev < PD_REV30 ?
+					   PD_MSG_CTRL_REJECT :
+					   PD_MSG_CTRL_NOT_SUPP,
+					   NONE_AMS);
+			break;
+		}
+
+		port->sink_request = le32_to_cpu(msg->payload[0]);
+
+		if (port->vdm_sm_running && port->explicit_contract) {
+			tcpm_pd_handle_msg(port, PD_MSG_CTRL_WAIT, port->ams);
+			break;
+		}
+
+		if (port->state == SRC_SEND_CAPABILITIES)
+			tcpm_set_state(port, SRC_NEGOTIATE_CAPABILITIES, 0);
+		else
+			tcpm_pd_handle_state(port, SRC_NEGOTIATE_CAPABILITIES,
+					     POWER_NEGOTIATION, 0);
+		break;
+	case PD_DATA_SINK_CAP:
+		/* We don't do anything with this at the moment... */
+		for (i = 0; i < cnt; i++)
+			port->sink_caps[i] = le32_to_cpu(msg->payload[i]);
+
+		partner_frs_current = (port->sink_caps[0] & PDO_FIXED_FRS_CURR_MASK) >>
+			PDO_FIXED_FRS_CURR_SHIFT;
+		frs_enable = partner_frs_current && (partner_frs_current <=
+						     port->new_source_frs_current);
+		tcpm_log(port,
+			 "Port partner FRS capable partner_frs_current:%u port_frs_current:%u enable:%c",
+			 partner_frs_current, port->new_source_frs_current, frs_enable ? 'y' : 'n');
+		if (frs_enable) {
+			ret  = port->tcpc->enable_frs(port->tcpc, true);
+			tcpm_log(port, "Enable FRS %s, ret:%d\n", ret ? "fail" : "success", ret);
+		}
+
+		port->nr_sink_caps = cnt;
+		port->sink_cap_done = true;
+		tcpm_register_sink_caps(port);
+
+		if (port->ams == GET_SINK_CAPABILITIES)
+			tcpm_set_state(port, ready_state(port), 0);
+		/* Unexpected Sink Capabilities */
+		else
+			tcpm_pd_handle_msg(port,
+					   port->negotiated_rev < PD_REV30 ?
+					   PD_MSG_CTRL_REJECT :
+					   PD_MSG_CTRL_NOT_SUPP,
+					   NONE_AMS);
+		break;
+	case PD_DATA_VENDOR_DEF:
+		tcpm_handle_vdm_request(port, msg->payload, cnt);
+		break;
+	case PD_DATA_BIST:
+		port->bist_request = le32_to_cpu(msg->payload[0]);
+		tcpm_pd_handle_state(port, BIST_RX, BIST, 0);
+		break;
+	case PD_DATA_ALERT:
+		if (port->state != SRC_READY && port->state != SNK_READY)
+			tcpm_pd_handle_state(port, port->pwr_role == TYPEC_SOURCE ?
+					     SRC_SOFT_RESET_WAIT_SNK_TX : SNK_SOFT_RESET,
+					     NONE_AMS, 0);
+		else
+			tcpm_handle_alert(port, msg->payload, cnt);
+		break;
+	case PD_DATA_BATT_STATUS:
+	case PD_DATA_GET_COUNTRY_INFO:
+		/* Currently unsupported */
+		tcpm_pd_handle_msg(port, port->negotiated_rev < PD_REV30 ?
+				   PD_MSG_CTRL_REJECT :
+				   PD_MSG_CTRL_NOT_SUPP,
+				   NONE_AMS);
+		break;
+	default:
+		tcpm_pd_handle_msg(port, port->negotiated_rev < PD_REV30 ?
+				   PD_MSG_CTRL_REJECT :
+				   PD_MSG_CTRL_NOT_SUPP,
+				   NONE_AMS);
+		tcpm_log(port, "Unrecognized data message type %#x", type);
+		break;
+	}
+}
+
+static void tcpm_pps_complete(struct tcpm_port *port, int result)
+{
+	if (port->pps_pending) {
+		port->pps_status = result;
+		port->pps_pending = false;
+		complete(&port->pps_complete);
+	}
+}
+
+static void tcpm_pd_ctrl_request(struct tcpm_port *port,
+				 const struct pd_message *msg)
+{
+	enum pd_ctrl_msg_type type = pd_header_type_le(msg->header);
+	enum tcpm_state next_state;
+
+	/*
+	 * Stop VDM state machine if interrupted by other Messages while NOT_SUPP is allowed in
+	 * VDM AMS if waiting for VDM responses and will be handled later.
+	 */
+	if (tcpm_vdm_ams(port) && type != PD_CTRL_NOT_SUPP && type != PD_CTRL_GOOD_CRC) {
+		port->vdm_state = VDM_STATE_ERR_BUSY;
+		tcpm_ams_finish(port);
+		mod_vdm_delayed_work(port, 0);
+	}
+
+	switch (type) {
+	case PD_CTRL_GOOD_CRC:
+	case PD_CTRL_PING:
+		break;
+	case PD_CTRL_GET_SOURCE_CAP:
+		tcpm_pd_handle_msg(port, PD_MSG_DATA_SOURCE_CAP, GET_SOURCE_CAPABILITIES);
+		break;
+	case PD_CTRL_GET_SINK_CAP:
+		tcpm_pd_handle_msg(port, PD_MSG_DATA_SINK_CAP, GET_SINK_CAPABILITIES);
+		break;
+	case PD_CTRL_GOTO_MIN:
+		break;
+	case PD_CTRL_PS_RDY:
+		switch (port->state) {
+		case SNK_TRANSITION_SINK:
+			if (port->vbus_present) {
+				tcpm_set_current_limit(port,
+						       port->req_current_limit,
+						       port->req_supply_voltage);
+				port->explicit_contract = true;
+				tcpm_set_auto_vbus_discharge_threshold(port,
+								       TYPEC_PWR_MODE_PD,
+								       port->pps_data.active,
+								       port->supply_voltage);
+				tcpm_set_state(port, SNK_READY, 0);
+			} else {
+				/*
+				 * Seen after power swap. Keep waiting for VBUS
+				 * in a transitional state.
+				 */
+				tcpm_set_state(port,
+					       SNK_TRANSITION_SINK_VBUS, 0);
+			}
+			break;
+		case PR_SWAP_SRC_SNK_SOURCE_OFF_CC_DEBOUNCED:
+			tcpm_set_state(port, PR_SWAP_SRC_SNK_SINK_ON, 0);
+			break;
+		case PR_SWAP_SNK_SRC_SINK_OFF:
+			tcpm_set_state(port, PR_SWAP_SNK_SRC_SOURCE_ON, 0);
+			break;
+		case VCONN_SWAP_WAIT_FOR_VCONN:
+			tcpm_set_state(port, VCONN_SWAP_TURN_OFF_VCONN, 0);
+			break;
+		case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF:
+			tcpm_set_state(port, FR_SWAP_SNK_SRC_NEW_SINK_READY, 0);
+			break;
+		default:
+			tcpm_pd_handle_state(port,
+					     port->pwr_role == TYPEC_SOURCE ?
+					     SRC_SOFT_RESET_WAIT_SNK_TX :
+					     SNK_SOFT_RESET,
+					     NONE_AMS, 0);
+			break;
+		}
+		break;
+	case PD_CTRL_REJECT:
+	case PD_CTRL_WAIT:
+	case PD_CTRL_NOT_SUPP:
+		switch (port->state) {
+		case SNK_NEGOTIATE_CAPABILITIES:
+			/* USB PD specification, Figure 8-43 */
+			if (port->explicit_contract)
+				next_state = SNK_READY;
+			else
+				next_state = SNK_WAIT_CAPABILITIES;
+
+			/* Threshold was relaxed before sending Request. Restore it back. */
+			tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
+							       port->pps_data.active,
+							       port->supply_voltage);
+			tcpm_set_state(port, next_state, 0);
+			break;
+		case SNK_NEGOTIATE_PPS_CAPABILITIES:
+			/* Revert data back from any requested PPS updates */
+			port->pps_data.req_out_volt = port->supply_voltage;
+			port->pps_data.req_op_curr = port->current_limit;
+			port->pps_status = (type == PD_CTRL_WAIT ?
+					    -EAGAIN : -EOPNOTSUPP);
+
+			/* Threshold was relaxed before sending Request. Restore it back. */
+			tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
+							       port->pps_data.active,
+							       port->supply_voltage);
+
+			tcpm_set_state(port, SNK_READY, 0);
+			break;
+		case DR_SWAP_SEND:
+			port->swap_status = (type == PD_CTRL_WAIT ?
+					     -EAGAIN : -EOPNOTSUPP);
+			tcpm_set_state(port, DR_SWAP_CANCEL, 0);
+			break;
+		case PR_SWAP_SEND:
+			port->swap_status = (type == PD_CTRL_WAIT ?
+					     -EAGAIN : -EOPNOTSUPP);
+			tcpm_set_state(port, PR_SWAP_CANCEL, 0);
+			break;
+		case VCONN_SWAP_SEND:
+			port->swap_status = (type == PD_CTRL_WAIT ?
+					     -EAGAIN : -EOPNOTSUPP);
+			tcpm_set_state(port, VCONN_SWAP_CANCEL, 0);
+			break;
+		case FR_SWAP_SEND:
+			tcpm_set_state(port, FR_SWAP_CANCEL, 0);
+			break;
+		case GET_SINK_CAP:
+			port->sink_cap_done = true;
+			tcpm_set_state(port, ready_state(port), 0);
+			break;
+		/*
+		 * Some port partners do not support GET_STATUS, avoid soft reset the link to
+		 * prevent redundant power re-negotiation
+		 */
+		case GET_STATUS_SEND:
+			tcpm_set_state(port, ready_state(port), 0);
+			break;
+		case SRC_READY:
+		case SNK_READY:
+			if (port->vdm_state > VDM_STATE_READY) {
+				port->vdm_state = VDM_STATE_DONE;
+				if (tcpm_vdm_ams(port))
+					tcpm_ams_finish(port);
+				mod_vdm_delayed_work(port, 0);
+				break;
+			}
+			fallthrough;
+		default:
+			tcpm_pd_handle_state(port,
+					     port->pwr_role == TYPEC_SOURCE ?
+					     SRC_SOFT_RESET_WAIT_SNK_TX :
+					     SNK_SOFT_RESET,
+					     NONE_AMS, 0);
+			break;
+		}
+		break;
+	case PD_CTRL_ACCEPT:
+		switch (port->state) {
+		case SNK_NEGOTIATE_CAPABILITIES:
+			port->pps_data.active = false;
+			tcpm_set_state(port, SNK_TRANSITION_SINK, 0);
+			break;
+		case SNK_NEGOTIATE_PPS_CAPABILITIES:
+			port->pps_data.active = true;
+			port->pps_data.min_volt = port->pps_data.req_min_volt;
+			port->pps_data.max_volt = port->pps_data.req_max_volt;
+			port->pps_data.max_curr = port->pps_data.req_max_curr;
+			port->req_supply_voltage = port->pps_data.req_out_volt;
+			port->req_current_limit = port->pps_data.req_op_curr;
+			power_supply_changed(port->psy);
+			tcpm_set_state(port, SNK_TRANSITION_SINK, 0);
+			break;
+		case SOFT_RESET_SEND:
+			if (port->ams == SOFT_RESET_AMS)
+				tcpm_ams_finish(port);
+			if (port->pwr_role == TYPEC_SOURCE) {
+				port->upcoming_state = SRC_SEND_CAPABILITIES;
+				tcpm_ams_start(port, POWER_NEGOTIATION);
+			} else {
+				tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
+			}
+			break;
+		case DR_SWAP_SEND:
+			tcpm_set_state(port, DR_SWAP_CHANGE_DR, 0);
+			break;
+		case PR_SWAP_SEND:
+			tcpm_set_state(port, PR_SWAP_START, 0);
+			break;
+		case VCONN_SWAP_SEND:
+			tcpm_set_state(port, VCONN_SWAP_START, 0);
+			break;
+		case FR_SWAP_SEND:
+			tcpm_set_state(port, FR_SWAP_SNK_SRC_TRANSITION_TO_OFF, 0);
+			break;
+		default:
+			tcpm_pd_handle_state(port,
+					     port->pwr_role == TYPEC_SOURCE ?
+					     SRC_SOFT_RESET_WAIT_SNK_TX :
+					     SNK_SOFT_RESET,
+					     NONE_AMS, 0);
+			break;
+		}
+		break;
+	case PD_CTRL_SOFT_RESET:
+		port->ams = SOFT_RESET_AMS;
+		tcpm_set_state(port, SOFT_RESET, 0);
+		break;
+	case PD_CTRL_DR_SWAP:
+		/*
+		 * XXX
+		 * 6.3.9: If an alternate mode is active, a request to swap
+		 * alternate modes shall trigger a port reset.
+		 */
+		if (port->typec_caps.data != TYPEC_PORT_DRD) {
+			tcpm_pd_handle_msg(port,
+					   port->negotiated_rev < PD_REV30 ?
+					   PD_MSG_CTRL_REJECT :
+					   PD_MSG_CTRL_NOT_SUPP,
+					   NONE_AMS);
+		} else {
+			if (port->send_discover) {
+				tcpm_queue_message(port, PD_MSG_CTRL_WAIT);
+				break;
+			}
+
+			tcpm_pd_handle_state(port, DR_SWAP_ACCEPT, DATA_ROLE_SWAP, 0);
+		}
+		break;
+	case PD_CTRL_PR_SWAP:
+		if (port->port_type != TYPEC_PORT_DRP) {
+			tcpm_pd_handle_msg(port,
+					   port->negotiated_rev < PD_REV30 ?
+					   PD_MSG_CTRL_REJECT :
+					   PD_MSG_CTRL_NOT_SUPP,
+					   NONE_AMS);
+		} else {
+			if (port->send_discover) {
+				tcpm_queue_message(port, PD_MSG_CTRL_WAIT);
+				break;
+			}
+
+			tcpm_pd_handle_state(port, PR_SWAP_ACCEPT, POWER_ROLE_SWAP, 0);
+		}
+		break;
+	case PD_CTRL_VCONN_SWAP:
+		if (port->send_discover) {
+			tcpm_queue_message(port, PD_MSG_CTRL_WAIT);
+			break;
+		}
+
+		tcpm_pd_handle_state(port, VCONN_SWAP_ACCEPT, VCONN_SWAP, 0);
+		break;
+	case PD_CTRL_GET_SOURCE_CAP_EXT:
+	case PD_CTRL_GET_STATUS:
+	case PD_CTRL_FR_SWAP:
+	case PD_CTRL_GET_PPS_STATUS:
+	case PD_CTRL_GET_COUNTRY_CODES:
+		/* Currently not supported */
+		tcpm_pd_handle_msg(port,
+				   port->negotiated_rev < PD_REV30 ?
+				   PD_MSG_CTRL_REJECT :
+				   PD_MSG_CTRL_NOT_SUPP,
+				   NONE_AMS);
+		break;
+	default:
+		tcpm_pd_handle_msg(port,
+				   port->negotiated_rev < PD_REV30 ?
+				   PD_MSG_CTRL_REJECT :
+				   PD_MSG_CTRL_NOT_SUPP,
+				   NONE_AMS);
+		tcpm_log(port, "Unrecognized ctrl message type %#x", type);
+		break;
+	}
+}
+
+static void tcpm_pd_ext_msg_request(struct tcpm_port *port,
+				    const struct pd_message *msg)
+{
+	enum pd_ext_msg_type type = pd_header_type_le(msg->header);
+	unsigned int data_size = pd_ext_header_data_size_le(msg->ext_msg.header);
+
+	/* stopping VDM state machine if interrupted by other Messages */
+	if (tcpm_vdm_ams(port)) {
+		port->vdm_state = VDM_STATE_ERR_BUSY;
+		tcpm_ams_finish(port);
+		mod_vdm_delayed_work(port, 0);
+	}
+
+	if (!(le16_to_cpu(msg->ext_msg.header) & PD_EXT_HDR_CHUNKED)) {
+		tcpm_pd_handle_msg(port, PD_MSG_CTRL_NOT_SUPP, NONE_AMS);
+		tcpm_log(port, "Unchunked extended messages unsupported");
+		return;
+	}
+
+	if (data_size > PD_EXT_MAX_CHUNK_DATA) {
+		tcpm_pd_handle_state(port, CHUNK_NOT_SUPP, NONE_AMS, PD_T_CHUNK_NOT_SUPP);
+		tcpm_log(port, "Chunk handling not yet supported");
+		return;
+	}
+
+	switch (type) {
+	case PD_EXT_STATUS:
+	case PD_EXT_PPS_STATUS:
+		if (port->ams == GETTING_SOURCE_SINK_STATUS) {
+			tcpm_ams_finish(port);
+			tcpm_set_state(port, ready_state(port), 0);
+		} else {
+			/* unexpected Status or PPS_Status Message */
+			tcpm_pd_handle_state(port, port->pwr_role == TYPEC_SOURCE ?
+					     SRC_SOFT_RESET_WAIT_SNK_TX : SNK_SOFT_RESET,
+					     NONE_AMS, 0);
+		}
+		break;
+	case PD_EXT_SOURCE_CAP_EXT:
+	case PD_EXT_GET_BATT_CAP:
+	case PD_EXT_GET_BATT_STATUS:
+	case PD_EXT_BATT_CAP:
+	case PD_EXT_GET_MANUFACTURER_INFO:
+	case PD_EXT_MANUFACTURER_INFO:
+	case PD_EXT_SECURITY_REQUEST:
+	case PD_EXT_SECURITY_RESPONSE:
+	case PD_EXT_FW_UPDATE_REQUEST:
+	case PD_EXT_FW_UPDATE_RESPONSE:
+	case PD_EXT_COUNTRY_INFO:
+	case PD_EXT_COUNTRY_CODES:
+		tcpm_pd_handle_msg(port, PD_MSG_CTRL_NOT_SUPP, NONE_AMS);
+		break;
+	default:
+		tcpm_pd_handle_msg(port, PD_MSG_CTRL_NOT_SUPP, NONE_AMS);
+		tcpm_log(port, "Unrecognized extended message type %#x", type);
+		break;
+	}
+}
+
+static void tcpm_pd_rx_handler(struct kthread_work *work)
+{
+	struct pd_rx_event *event = container_of(work,
+						 struct pd_rx_event, work);
+	const struct pd_message *msg = &event->msg;
+	unsigned int cnt = pd_header_cnt_le(msg->header);
+	struct tcpm_port *port = event->port;
+
+	mutex_lock(&port->lock);
+
+	tcpm_log(port, "PD RX, header: %#x [%d]", le16_to_cpu(msg->header),
+		 port->attached);
+
+	if (port->attached) {
+		enum pd_ctrl_msg_type type = pd_header_type_le(msg->header);
+		unsigned int msgid = pd_header_msgid_le(msg->header);
+
+		/*
+		 * USB PD standard, 6.6.1.2:
+		 * "... if MessageID value in a received Message is the
+		 * same as the stored value, the receiver shall return a
+		 * GoodCRC Message with that MessageID value and drop
+		 * the Message (this is a retry of an already received
+		 * Message). Note: this shall not apply to the Soft_Reset
+		 * Message which always has a MessageID value of zero."
+		 */
+		if (msgid == port->rx_msgid && type != PD_CTRL_SOFT_RESET)
+			goto done;
+		port->rx_msgid = msgid;
+
+		/*
+		 * If both ends believe to be DFP/host, we have a data role
+		 * mismatch.
+		 */
+		if (!!(le16_to_cpu(msg->header) & PD_HEADER_DATA_ROLE) ==
+		    (port->data_role == TYPEC_HOST)) {
+			tcpm_log(port,
+				 "Data role mismatch, initiating error recovery");
+			tcpm_set_state(port, ERROR_RECOVERY, 0);
+		} else {
+			if (le16_to_cpu(msg->header) & PD_HEADER_EXT_HDR)
+				tcpm_pd_ext_msg_request(port, msg);
+			else if (cnt)
+				tcpm_pd_data_request(port, msg);
+			else
+				tcpm_pd_ctrl_request(port, msg);
+		}
+	}
+
+done:
+	mutex_unlock(&port->lock);
+	kfree(event);
+}
+
+void tcpm_pd_receive(struct tcpm_port *port, const struct pd_message *msg)
+{
+	struct pd_rx_event *event;
+
+	event = kzalloc(sizeof(*event), GFP_ATOMIC);
+	if (!event)
+		return;
+
+	kthread_init_work(&event->work, tcpm_pd_rx_handler);
+	event->port = port;
+	memcpy(&event->msg, msg, sizeof(*msg));
+	kthread_queue_work(port->wq, &event->work);
+}
+EXPORT_SYMBOL_GPL(tcpm_pd_receive);
+
+static int tcpm_pd_send_control(struct tcpm_port *port,
+				enum pd_ctrl_msg_type type)
+{
+	struct pd_message msg;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.header = PD_HEADER_LE(type, port->pwr_role,
+				  port->data_role,
+				  port->negotiated_rev,
+				  port->message_id, 0);
+
+	return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg);
+}
+
+/*
+ * Send queued message without affecting state.
+ * Return true if state machine should go back to sleep,
+ * false otherwise.
+ */
+static bool tcpm_send_queued_message(struct tcpm_port *port)
+{
+	enum pd_msg_request queued_message;
+	int ret;
+
+	do {
+		queued_message = port->queued_message;
+		port->queued_message = PD_MSG_NONE;
+
+		switch (queued_message) {
+		case PD_MSG_CTRL_WAIT:
+			tcpm_pd_send_control(port, PD_CTRL_WAIT);
+			break;
+		case PD_MSG_CTRL_REJECT:
+			tcpm_pd_send_control(port, PD_CTRL_REJECT);
+			break;
+		case PD_MSG_CTRL_NOT_SUPP:
+			tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP);
+			break;
+		case PD_MSG_DATA_SINK_CAP:
+			ret = tcpm_pd_send_sink_caps(port);
+			if (ret < 0) {
+				tcpm_log(port, "Unable to send snk caps, ret=%d", ret);
+				tcpm_set_state(port, SNK_SOFT_RESET, 0);
+			}
+			tcpm_ams_finish(port);
+			break;
+		case PD_MSG_DATA_SOURCE_CAP:
+			ret = tcpm_pd_send_source_caps(port);
+			if (ret < 0) {
+				tcpm_log(port,
+					 "Unable to send src caps, ret=%d",
+					 ret);
+				tcpm_set_state(port, SOFT_RESET_SEND, 0);
+			} else if (port->pwr_role == TYPEC_SOURCE) {
+				tcpm_ams_finish(port);
+				tcpm_set_state(port, HARD_RESET_SEND,
+					       PD_T_SENDER_RESPONSE);
+			} else {
+				tcpm_ams_finish(port);
+			}
+			break;
+		default:
+			break;
+		}
+	} while (port->queued_message != PD_MSG_NONE);
+
+	if (port->delayed_state != INVALID_STATE) {
+		if (ktime_after(port->delayed_runtime, ktime_get())) {
+			mod_tcpm_delayed_work(port, ktime_to_ms(ktime_sub(port->delayed_runtime,
+									  ktime_get())));
+			return true;
+		}
+		port->delayed_state = INVALID_STATE;
+	}
+	return false;
+}
+
+static int tcpm_pd_check_request(struct tcpm_port *port)
+{
+	u32 pdo, rdo = port->sink_request;
+	unsigned int max, op, pdo_max, index;
+	enum pd_pdo_type type;
+
+	index = rdo_index(rdo);
+	if (!index || index > port->nr_src_pdo)
+		return -EINVAL;
+
+	pdo = port->src_pdo[index - 1];
+	type = pdo_type(pdo);
+	switch (type) {
+	case PDO_TYPE_FIXED:
+	case PDO_TYPE_VAR:
+		max = rdo_max_current(rdo);
+		op = rdo_op_current(rdo);
+		pdo_max = pdo_max_current(pdo);
+
+		if (op > pdo_max)
+			return -EINVAL;
+		if (max > pdo_max && !(rdo & RDO_CAP_MISMATCH))
+			return -EINVAL;
+
+		if (type == PDO_TYPE_FIXED)
+			tcpm_log(port,
+				 "Requested %u mV, %u mA for %u / %u mA",
+				 pdo_fixed_voltage(pdo), pdo_max, op, max);
+		else
+			tcpm_log(port,
+				 "Requested %u -> %u mV, %u mA for %u / %u mA",
+				 pdo_min_voltage(pdo), pdo_max_voltage(pdo),
+				 pdo_max, op, max);
+		break;
+	case PDO_TYPE_BATT:
+		max = rdo_max_power(rdo);
+		op = rdo_op_power(rdo);
+		pdo_max = pdo_max_power(pdo);
+
+		if (op > pdo_max)
+			return -EINVAL;
+		if (max > pdo_max && !(rdo & RDO_CAP_MISMATCH))
+			return -EINVAL;
+		tcpm_log(port,
+			 "Requested %u -> %u mV, %u mW for %u / %u mW",
+			 pdo_min_voltage(pdo), pdo_max_voltage(pdo),
+			 pdo_max, op, max);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	port->op_vsafe5v = index == 1;
+
+	return 0;
+}
+
+#define min_power(x, y) min(pdo_max_power(x), pdo_max_power(y))
+#define min_current(x, y) min(pdo_max_current(x), pdo_max_current(y))
+
+static int tcpm_pd_select_pdo(struct tcpm_port *port, int *sink_pdo,
+			      int *src_pdo)
+{
+	unsigned int i, j, max_src_mv = 0, min_src_mv = 0, max_mw = 0,
+		     max_mv = 0, src_mw = 0, src_ma = 0, max_snk_mv = 0,
+		     min_snk_mv = 0;
+	int ret = -EINVAL;
+
+	port->pps_data.supported = false;
+	port->usb_type = POWER_SUPPLY_USB_TYPE_PD;
+	power_supply_changed(port->psy);
+
+	/*
+	 * Select the source PDO providing the most power which has a
+	 * matchig sink cap.
+	 */
+	for (i = 0; i < port->nr_source_caps; i++) {
+		u32 pdo = port->source_caps[i];
+		enum pd_pdo_type type = pdo_type(pdo);
+
+		switch (type) {
+		case PDO_TYPE_FIXED:
+			max_src_mv = pdo_fixed_voltage(pdo);
+			min_src_mv = max_src_mv;
+			break;
+		case PDO_TYPE_BATT:
+		case PDO_TYPE_VAR:
+			max_src_mv = pdo_max_voltage(pdo);
+			min_src_mv = pdo_min_voltage(pdo);
+			break;
+		case PDO_TYPE_APDO:
+			if (pdo_apdo_type(pdo) == APDO_TYPE_PPS) {
+				port->pps_data.supported = true;
+				port->usb_type =
+					POWER_SUPPLY_USB_TYPE_PD_PPS;
+				power_supply_changed(port->psy);
+			}
+			continue;
+		default:
+			tcpm_log(port, "Invalid source PDO type, ignoring");
+			continue;
+		}
+
+		switch (type) {
+		case PDO_TYPE_FIXED:
+		case PDO_TYPE_VAR:
+			src_ma = pdo_max_current(pdo);
+			src_mw = src_ma * min_src_mv / 1000;
+			break;
+		case PDO_TYPE_BATT:
+			src_mw = pdo_max_power(pdo);
+			break;
+		case PDO_TYPE_APDO:
+			continue;
+		default:
+			tcpm_log(port, "Invalid source PDO type, ignoring");
+			continue;
+		}
+
+		for (j = 0; j < port->nr_snk_pdo; j++) {
+			pdo = port->snk_pdo[j];
+
+			switch (pdo_type(pdo)) {
+			case PDO_TYPE_FIXED:
+				max_snk_mv = pdo_fixed_voltage(pdo);
+				min_snk_mv = max_snk_mv;
+				break;
+			case PDO_TYPE_BATT:
+			case PDO_TYPE_VAR:
+				max_snk_mv = pdo_max_voltage(pdo);
+				min_snk_mv = pdo_min_voltage(pdo);
+				break;
+			case PDO_TYPE_APDO:
+				continue;
+			default:
+				tcpm_log(port, "Invalid sink PDO type, ignoring");
+				continue;
+			}
+
+			if (max_src_mv <= max_snk_mv &&
+				min_src_mv >= min_snk_mv) {
+				/* Prefer higher voltages if available */
+				if ((src_mw == max_mw && min_src_mv > max_mv) ||
+							src_mw > max_mw) {
+					*src_pdo = i;
+					*sink_pdo = j;
+					max_mw = src_mw;
+					max_mv = min_src_mv;
+					ret = 0;
+				}
+			}
+		}
+	}
+
+	return ret;
+}
+
+#define min_pps_apdo_current(x, y)	\
+	min(pdo_pps_apdo_max_current(x), pdo_pps_apdo_max_current(y))
+
+static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port)
+{
+	unsigned int i, j, max_mw = 0, max_mv = 0;
+	unsigned int min_src_mv, max_src_mv, src_ma, src_mw;
+	unsigned int min_snk_mv, max_snk_mv;
+	unsigned int max_op_mv;
+	u32 pdo, src, snk;
+	unsigned int src_pdo = 0, snk_pdo = 0;
+
+	/*
+	 * Select the source PPS APDO providing the most power while staying
+	 * within the board's limits. We skip the first PDO as this is always
+	 * 5V 3A.
+	 */
+	for (i = 1; i < port->nr_source_caps; ++i) {
+		pdo = port->source_caps[i];
+
+		switch (pdo_type(pdo)) {
+		case PDO_TYPE_APDO:
+			if (pdo_apdo_type(pdo) != APDO_TYPE_PPS) {
+				tcpm_log(port, "Not PPS APDO (source), ignoring");
+				continue;
+			}
+
+			min_src_mv = pdo_pps_apdo_min_voltage(pdo);
+			max_src_mv = pdo_pps_apdo_max_voltage(pdo);
+			src_ma = pdo_pps_apdo_max_current(pdo);
+			src_mw = (src_ma * max_src_mv) / 1000;
+
+			/*
+			 * Now search through the sink PDOs to find a matching
+			 * PPS APDO. Again skip the first sink PDO as this will
+			 * always be 5V 3A.
+			 */
+			for (j = 1; j < port->nr_snk_pdo; j++) {
+				pdo = port->snk_pdo[j];
+
+				switch (pdo_type(pdo)) {
+				case PDO_TYPE_APDO:
+					if (pdo_apdo_type(pdo) != APDO_TYPE_PPS) {
+						tcpm_log(port,
+							 "Not PPS APDO (sink), ignoring");
+						continue;
+					}
+
+					min_snk_mv =
+						pdo_pps_apdo_min_voltage(pdo);
+					max_snk_mv =
+						pdo_pps_apdo_max_voltage(pdo);
+					break;
+				default:
+					tcpm_log(port,
+						 "Not APDO type (sink), ignoring");
+					continue;
+				}
+
+				if (min_src_mv <= max_snk_mv &&
+				    max_src_mv >= min_snk_mv) {
+					max_op_mv = min(max_src_mv, max_snk_mv);
+					src_mw = (max_op_mv * src_ma) / 1000;
+					/* Prefer higher voltages if available */
+					if ((src_mw == max_mw &&
+					     max_op_mv > max_mv) ||
+					    src_mw > max_mw) {
+						src_pdo = i;
+						snk_pdo = j;
+						max_mw = src_mw;
+						max_mv = max_op_mv;
+					}
+				}
+			}
+
+			break;
+		default:
+			tcpm_log(port, "Not APDO type (source), ignoring");
+			continue;
+		}
+	}
+
+	if (src_pdo) {
+		src = port->source_caps[src_pdo];
+		snk = port->snk_pdo[snk_pdo];
+
+		port->pps_data.req_min_volt = max(pdo_pps_apdo_min_voltage(src),
+						  pdo_pps_apdo_min_voltage(snk));
+		port->pps_data.req_max_volt = min(pdo_pps_apdo_max_voltage(src),
+						  pdo_pps_apdo_max_voltage(snk));
+		port->pps_data.req_max_curr = min_pps_apdo_current(src, snk);
+		port->pps_data.req_out_volt = min(port->pps_data.req_max_volt,
+						  max(port->pps_data.req_min_volt,
+						      port->pps_data.req_out_volt));
+		port->pps_data.req_op_curr = min(port->pps_data.req_max_curr,
+						 port->pps_data.req_op_curr);
+	}
+
+	return src_pdo;
+}
+
+static int tcpm_pd_build_request(struct tcpm_port *port, u32 *rdo)
+{
+	unsigned int mv, ma, mw, flags;
+	unsigned int max_ma, max_mw;
+	enum pd_pdo_type type;
+	u32 pdo, matching_snk_pdo;
+	int src_pdo_index = 0;
+	int snk_pdo_index = 0;
+	int ret;
+
+	ret = tcpm_pd_select_pdo(port, &snk_pdo_index, &src_pdo_index);
+	if (ret < 0)
+		return ret;
+
+	pdo = port->source_caps[src_pdo_index];
+	matching_snk_pdo = port->snk_pdo[snk_pdo_index];
+	type = pdo_type(pdo);
+
+	switch (type) {
+	case PDO_TYPE_FIXED:
+		mv = pdo_fixed_voltage(pdo);
+		break;
+	case PDO_TYPE_BATT:
+	case PDO_TYPE_VAR:
+		mv = pdo_min_voltage(pdo);
+		break;
+	default:
+		tcpm_log(port, "Invalid PDO selected!");
+		return -EINVAL;
+	}
+
+	/* Select maximum available current within the sink pdo's limit */
+	if (type == PDO_TYPE_BATT) {
+		mw = min_power(pdo, matching_snk_pdo);
+		ma = 1000 * mw / mv;
+	} else {
+		ma = min_current(pdo, matching_snk_pdo);
+		mw = ma * mv / 1000;
+	}
+
+	flags = RDO_USB_COMM | RDO_NO_SUSPEND;
+
+	/* Set mismatch bit if offered power is less than operating power */
+	max_ma = ma;
+	max_mw = mw;
+	if (mw < port->operating_snk_mw) {
+		flags |= RDO_CAP_MISMATCH;
+		if (type == PDO_TYPE_BATT &&
+		    (pdo_max_power(matching_snk_pdo) > pdo_max_power(pdo)))
+			max_mw = pdo_max_power(matching_snk_pdo);
+		else if (pdo_max_current(matching_snk_pdo) >
+			 pdo_max_current(pdo))
+			max_ma = pdo_max_current(matching_snk_pdo);
+	}
+
+	tcpm_log(port, "cc=%d cc1=%d cc2=%d vbus=%d vconn=%s polarity=%d",
+		 port->cc_req, port->cc1, port->cc2, port->vbus_source,
+		 port->vconn_role == TYPEC_SOURCE ? "source" : "sink",
+		 port->polarity);
+
+	if (type == PDO_TYPE_BATT) {
+		*rdo = RDO_BATT(src_pdo_index + 1, mw, max_mw, flags);
+
+		tcpm_log(port, "Requesting PDO %d: %u mV, %u mW%s",
+			 src_pdo_index, mv, mw,
+			 flags & RDO_CAP_MISMATCH ? " [mismatch]" : "");
+	} else {
+		*rdo = RDO_FIXED(src_pdo_index + 1, ma, max_ma, flags);
+
+		tcpm_log(port, "Requesting PDO %d: %u mV, %u mA%s",
+			 src_pdo_index, mv, ma,
+			 flags & RDO_CAP_MISMATCH ? " [mismatch]" : "");
+	}
+
+	port->req_current_limit = ma;
+	port->req_supply_voltage = mv;
+
+	return 0;
+}
+
+static int tcpm_pd_send_request(struct tcpm_port *port)
+{
+	struct pd_message msg;
+	int ret;
+	u32 rdo;
+
+	ret = tcpm_pd_build_request(port, &rdo);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Relax the threshold as voltage will be adjusted after Accept Message plus tSrcTransition.
+	 * It is safer to modify the threshold here.
+	 */
+	tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, 0);
+
+	memset(&msg, 0, sizeof(msg));
+	msg.header = PD_HEADER_LE(PD_DATA_REQUEST,
+				  port->pwr_role,
+				  port->data_role,
+				  port->negotiated_rev,
+				  port->message_id, 1);
+	msg.payload[0] = cpu_to_le32(rdo);
+
+	return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg);
+}
+
+static int tcpm_pd_build_pps_request(struct tcpm_port *port, u32 *rdo)
+{
+	unsigned int out_mv, op_ma, op_mw, max_mv, max_ma, flags;
+	enum pd_pdo_type type;
+	unsigned int src_pdo_index;
+	u32 pdo;
+
+	src_pdo_index = tcpm_pd_select_pps_apdo(port);
+	if (!src_pdo_index)
+		return -EOPNOTSUPP;
+
+	pdo = port->source_caps[src_pdo_index];
+	type = pdo_type(pdo);
+
+	switch (type) {
+	case PDO_TYPE_APDO:
+		if (pdo_apdo_type(pdo) != APDO_TYPE_PPS) {
+			tcpm_log(port, "Invalid APDO selected!");
+			return -EINVAL;
+		}
+		max_mv = port->pps_data.req_max_volt;
+		max_ma = port->pps_data.req_max_curr;
+		out_mv = port->pps_data.req_out_volt;
+		op_ma = port->pps_data.req_op_curr;
+		break;
+	default:
+		tcpm_log(port, "Invalid PDO selected!");
+		return -EINVAL;
+	}
+
+	flags = RDO_USB_COMM | RDO_NO_SUSPEND;
+
+	op_mw = (op_ma * out_mv) / 1000;
+	if (op_mw < port->operating_snk_mw) {
+		/*
+		 * Try raising current to meet power needs. If that's not enough
+		 * then try upping the voltage. If that's still not enough
+		 * then we've obviously chosen a PPS APDO which really isn't
+		 * suitable so abandon ship.
+		 */
+		op_ma = (port->operating_snk_mw * 1000) / out_mv;
+		if ((port->operating_snk_mw * 1000) % out_mv)
+			++op_ma;
+		op_ma += RDO_PROG_CURR_MA_STEP - (op_ma % RDO_PROG_CURR_MA_STEP);
+
+		if (op_ma > max_ma) {
+			op_ma = max_ma;
+			out_mv = (port->operating_snk_mw * 1000) / op_ma;
+			if ((port->operating_snk_mw * 1000) % op_ma)
+				++out_mv;
+			out_mv += RDO_PROG_VOLT_MV_STEP -
+				  (out_mv % RDO_PROG_VOLT_MV_STEP);
+
+			if (out_mv > max_mv) {
+				tcpm_log(port, "Invalid PPS APDO selected!");
+				return -EINVAL;
+			}
+		}
+	}
+
+	tcpm_log(port, "cc=%d cc1=%d cc2=%d vbus=%d vconn=%s polarity=%d",
+		 port->cc_req, port->cc1, port->cc2, port->vbus_source,
+		 port->vconn_role == TYPEC_SOURCE ? "source" : "sink",
+		 port->polarity);
+
+	*rdo = RDO_PROG(src_pdo_index + 1, out_mv, op_ma, flags);
+
+	tcpm_log(port, "Requesting APDO %d: %u mV, %u mA",
+		 src_pdo_index, out_mv, op_ma);
+
+	port->pps_data.req_op_curr = op_ma;
+	port->pps_data.req_out_volt = out_mv;
+
+	return 0;
+}
+
+static int tcpm_pd_send_pps_request(struct tcpm_port *port)
+{
+	struct pd_message msg;
+	int ret;
+	u32 rdo;
+
+	ret = tcpm_pd_build_pps_request(port, &rdo);
+	if (ret < 0)
+		return ret;
+
+	/* Relax the threshold as voltage will be adjusted right after Accept Message. */
+	tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, 0);
+
+	memset(&msg, 0, sizeof(msg));
+	msg.header = PD_HEADER_LE(PD_DATA_REQUEST,
+				  port->pwr_role,
+				  port->data_role,
+				  port->negotiated_rev,
+				  port->message_id, 1);
+	msg.payload[0] = cpu_to_le32(rdo);
+
+	return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg);
+}
+
+static int tcpm_set_vbus(struct tcpm_port *port, bool enable)
+{
+	int ret;
+
+	if (enable && port->vbus_charge)
+		return -EINVAL;
+
+	tcpm_log(port, "vbus:=%d charge=%d", enable, port->vbus_charge);
+
+	ret = port->tcpc->set_vbus(port->tcpc, enable, port->vbus_charge);
+	if (ret < 0)
+		return ret;
+
+	port->vbus_source = enable;
+	return 0;
+}
+
+static int tcpm_set_charge(struct tcpm_port *port, bool charge)
+{
+	int ret;
+
+	if (charge && port->vbus_source)
+		return -EINVAL;
+
+	if (charge != port->vbus_charge) {
+		tcpm_log(port, "vbus=%d charge:=%d", port->vbus_source, charge);
+		ret = port->tcpc->set_vbus(port->tcpc, port->vbus_source,
+					   charge);
+		if (ret < 0)
+			return ret;
+	}
+	port->vbus_charge = charge;
+	power_supply_changed(port->psy);
+	return 0;
+}
+
+static bool tcpm_start_toggling(struct tcpm_port *port, enum typec_cc_status cc)
+{
+	int ret;
+
+	if (!port->tcpc->start_toggling)
+		return false;
+
+	tcpm_log_force(port, "Start toggling");
+	ret = port->tcpc->start_toggling(port->tcpc, port->port_type, cc);
+	return ret == 0;
+}
+
+static int tcpm_init_vbus(struct tcpm_port *port)
+{
+	int ret;
+
+	ret = port->tcpc->set_vbus(port->tcpc, false, false);
+	port->vbus_source = false;
+	port->vbus_charge = false;
+	return ret;
+}
+
+static int tcpm_init_vconn(struct tcpm_port *port)
+{
+	int ret;
+
+	ret = port->tcpc->set_vconn(port->tcpc, false);
+	port->vconn_role = TYPEC_SINK;
+	return ret;
+}
+
+static void tcpm_typec_connect(struct tcpm_port *port)
+{
+	if (!port->connected) {
+		/* Make sure we don't report stale identity information */
+		memset(&port->partner_ident, 0, sizeof(port->partner_ident));
+		port->partner_desc.usb_pd = port->pd_capable;
+		if (tcpm_port_is_debug(port))
+			port->partner_desc.accessory = TYPEC_ACCESSORY_DEBUG;
+		else if (tcpm_port_is_audio(port))
+			port->partner_desc.accessory = TYPEC_ACCESSORY_AUDIO;
+		else
+			port->partner_desc.accessory = TYPEC_ACCESSORY_NONE;
+		port->partner = typec_register_partner(port->typec_port,
+						       &port->partner_desc);
+		port->connected = true;
+		typec_partner_set_usb_power_delivery(port->partner, port->partner_pd);
+	}
+}
+
+static int tcpm_src_attach(struct tcpm_port *port)
+{
+	enum typec_cc_polarity polarity =
+				port->cc2 == TYPEC_CC_RD ? TYPEC_POLARITY_CC2
+							 : TYPEC_POLARITY_CC1;
+	int ret;
+
+	if (port->attached)
+		return 0;
+
+	ret = tcpm_set_polarity(port, polarity);
+	if (ret < 0)
+		return ret;
+
+	tcpm_enable_auto_vbus_discharge(port, true);
+
+	ret = tcpm_set_roles(port, true, TYPEC_SOURCE, tcpm_data_role_for_source(port));
+	if (ret < 0)
+		return ret;
+
+	if (port->pd_supported) {
+		ret = port->tcpc->set_pd_rx(port->tcpc, true);
+		if (ret < 0)
+			goto out_disable_mux;
+	}
+
+	/*
+	 * USB Type-C specification, version 1.2,
+	 * chapter 4.5.2.2.8.1 (Attached.SRC Requirements)
+	 * Enable VCONN only if the non-RD port is set to RA.
+	 */
+	if ((polarity == TYPEC_POLARITY_CC1 && port->cc2 == TYPEC_CC_RA) ||
+	    (polarity == TYPEC_POLARITY_CC2 && port->cc1 == TYPEC_CC_RA)) {
+		ret = tcpm_set_vconn(port, true);
+		if (ret < 0)
+			goto out_disable_pd;
+	}
+
+	ret = tcpm_set_vbus(port, true);
+	if (ret < 0)
+		goto out_disable_vconn;
+
+	port->pd_capable = false;
+
+	port->partner = NULL;
+
+	port->attached = true;
+	port->send_discover = true;
+
+	return 0;
+
+out_disable_vconn:
+	tcpm_set_vconn(port, false);
+out_disable_pd:
+	if (port->pd_supported)
+		port->tcpc->set_pd_rx(port->tcpc, false);
+out_disable_mux:
+	tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE,
+		     TYPEC_ORIENTATION_NONE);
+	return ret;
+}
+
+static void tcpm_typec_disconnect(struct tcpm_port *port)
+{
+	if (port->connected) {
+		typec_partner_set_usb_power_delivery(port->partner, NULL);
+		typec_unregister_partner(port->partner);
+		port->partner = NULL;
+		port->connected = false;
+	}
+}
+
+static void tcpm_unregister_altmodes(struct tcpm_port *port)
+{
+	struct pd_mode_data *modep = &port->mode_data;
+	int i;
+
+	for (i = 0; i < modep->altmodes; i++) {
+		typec_unregister_altmode(port->partner_altmode[i]);
+		port->partner_altmode[i] = NULL;
+	}
+
+	memset(modep, 0, sizeof(*modep));
+}
+
+static void tcpm_set_partner_usb_comm_capable(struct tcpm_port *port, bool capable)
+{
+	tcpm_log(port, "Setting usb_comm capable %s", capable ? "true" : "false");
+
+	if (port->tcpc->set_partner_usb_comm_capable)
+		port->tcpc->set_partner_usb_comm_capable(port->tcpc, capable);
+}
+
+static void tcpm_reset_port(struct tcpm_port *port)
+{
+	tcpm_enable_auto_vbus_discharge(port, false);
+	port->in_ams = false;
+	port->ams = NONE_AMS;
+	port->vdm_sm_running = false;
+	tcpm_unregister_altmodes(port);
+	tcpm_typec_disconnect(port);
+	port->attached = false;
+	port->pd_capable = false;
+	port->pps_data.supported = false;
+	tcpm_set_partner_usb_comm_capable(port, false);
+
+	/*
+	 * First Rx ID should be 0; set this to a sentinel of -1 so that
+	 * we can check tcpm_pd_rx_handler() if we had seen it before.
+	 */
+	port->rx_msgid = -1;
+
+	port->tcpc->set_pd_rx(port->tcpc, false);
+	tcpm_init_vbus(port);	/* also disables charging */
+	tcpm_init_vconn(port);
+	tcpm_set_current_limit(port, 0, 0);
+	tcpm_set_polarity(port, TYPEC_POLARITY_CC1);
+	tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE,
+		     TYPEC_ORIENTATION_NONE);
+	tcpm_set_attached_state(port, false);
+	port->try_src_count = 0;
+	port->try_snk_count = 0;
+	port->usb_type = POWER_SUPPLY_USB_TYPE_C;
+	power_supply_changed(port->psy);
+	port->nr_sink_caps = 0;
+	port->sink_cap_done = false;
+	if (port->tcpc->enable_frs)
+		port->tcpc->enable_frs(port->tcpc, false);
+
+	usb_power_delivery_unregister_capabilities(port->partner_sink_caps);
+	port->partner_sink_caps = NULL;
+	usb_power_delivery_unregister_capabilities(port->partner_source_caps);
+	port->partner_source_caps = NULL;
+	usb_power_delivery_unregister(port->partner_pd);
+	port->partner_pd = NULL;
+}
+
+static void tcpm_detach(struct tcpm_port *port)
+{
+	if (tcpm_port_is_disconnected(port))
+		port->hard_reset_count = 0;
+
+	if (!port->attached)
+		return;
+
+	if (port->tcpc->set_bist_data) {
+		tcpm_log(port, "disable BIST MODE TESTDATA");
+		port->tcpc->set_bist_data(port->tcpc, false);
+	}
+
+	tcpm_reset_port(port);
+}
+
+static void tcpm_src_detach(struct tcpm_port *port)
+{
+	tcpm_detach(port);
+}
+
+static int tcpm_snk_attach(struct tcpm_port *port)
+{
+	int ret;
+
+	if (port->attached)
+		return 0;
+
+	ret = tcpm_set_polarity(port, port->cc2 != TYPEC_CC_OPEN ?
+				TYPEC_POLARITY_CC2 : TYPEC_POLARITY_CC1);
+	if (ret < 0)
+		return ret;
+
+	tcpm_enable_auto_vbus_discharge(port, true);
+
+	ret = tcpm_set_roles(port, true, TYPEC_SINK, tcpm_data_role_for_sink(port));
+	if (ret < 0)
+		return ret;
+
+	port->pd_capable = false;
+
+	port->partner = NULL;
+
+	port->attached = true;
+	port->send_discover = true;
+
+	return 0;
+}
+
+static void tcpm_snk_detach(struct tcpm_port *port)
+{
+	tcpm_detach(port);
+}
+
+static int tcpm_acc_attach(struct tcpm_port *port)
+{
+	int ret;
+
+	if (port->attached)
+		return 0;
+
+	ret = tcpm_set_roles(port, true, TYPEC_SOURCE,
+			     tcpm_data_role_for_source(port));
+	if (ret < 0)
+		return ret;
+
+	port->partner = NULL;
+
+	tcpm_typec_connect(port);
+
+	port->attached = true;
+
+	return 0;
+}
+
+static void tcpm_acc_detach(struct tcpm_port *port)
+{
+	tcpm_detach(port);
+}
+
+static inline enum tcpm_state hard_reset_state(struct tcpm_port *port)
+{
+	if (port->hard_reset_count < PD_N_HARD_RESET_COUNT)
+		return HARD_RESET_SEND;
+	if (port->pd_capable)
+		return ERROR_RECOVERY;
+	if (port->pwr_role == TYPEC_SOURCE)
+		return SRC_UNATTACHED;
+	if (port->state == SNK_WAIT_CAPABILITIES)
+		return SNK_READY;
+	return SNK_UNATTACHED;
+}
+
+static inline enum tcpm_state unattached_state(struct tcpm_port *port)
+{
+	if (port->port_type == TYPEC_PORT_DRP) {
+		if (port->pwr_role == TYPEC_SOURCE)
+			return SRC_UNATTACHED;
+		else
+			return SNK_UNATTACHED;
+	} else if (port->port_type == TYPEC_PORT_SRC) {
+		return SRC_UNATTACHED;
+	}
+
+	return SNK_UNATTACHED;
+}
+
+static void tcpm_swap_complete(struct tcpm_port *port, int result)
+{
+	if (port->swap_pending) {
+		port->swap_status = result;
+		port->swap_pending = false;
+		port->non_pd_role_swap = false;
+		complete(&port->swap_complete);
+	}
+}
+
+static enum typec_pwr_opmode tcpm_get_pwr_opmode(enum typec_cc_status cc)
+{
+	switch (cc) {
+	case TYPEC_CC_RP_1_5:
+		return TYPEC_PWR_MODE_1_5A;
+	case TYPEC_CC_RP_3_0:
+		return TYPEC_PWR_MODE_3_0A;
+	case TYPEC_CC_RP_DEF:
+	default:
+		return TYPEC_PWR_MODE_USB;
+	}
+}
+
+static enum typec_cc_status tcpm_pwr_opmode_to_rp(enum typec_pwr_opmode opmode)
+{
+	switch (opmode) {
+	case TYPEC_PWR_MODE_USB:
+		return TYPEC_CC_RP_DEF;
+	case TYPEC_PWR_MODE_1_5A:
+		return TYPEC_CC_RP_1_5;
+	case TYPEC_PWR_MODE_3_0A:
+	case TYPEC_PWR_MODE_PD:
+	default:
+		return TYPEC_CC_RP_3_0;
+	}
+}
+
+static void tcpm_set_initial_svdm_version(struct tcpm_port *port)
+{
+	switch (port->negotiated_rev) {
+	case PD_REV30:
+		break;
+	/*
+	 * 6.4.4.2.3 Structured VDM Version
+	 * 2.0 states "At this time, there is only one version (1.0) defined.
+	 * This field Shall be set to zero to indicate Version 1.0."
+	 * 3.0 states "This field Shall be set to 01b to indicate Version 2.0."
+	 * To ensure that we follow the Power Delivery revision we are currently
+	 * operating on, downgrade the SVDM version to the highest one supported
+	 * by the Power Delivery revision.
+	 */
+	case PD_REV20:
+		typec_partner_set_svdm_version(port->partner, SVDM_VER_1_0);
+		break;
+	default:
+		typec_partner_set_svdm_version(port->partner, SVDM_VER_1_0);
+		break;
+	}
+}
+
+static void run_state_machine(struct tcpm_port *port)
+{
+	int ret;
+	enum typec_pwr_opmode opmode;
+	unsigned int msecs;
+	enum tcpm_state upcoming_state;
+
+	port->enter_state = port->state;
+	switch (port->state) {
+	case TOGGLING:
+		break;
+	/* SRC states */
+	case SRC_UNATTACHED:
+		if (!port->non_pd_role_swap)
+			tcpm_swap_complete(port, -ENOTCONN);
+		tcpm_src_detach(port);
+		if (tcpm_start_toggling(port, tcpm_rp_cc(port))) {
+			tcpm_set_state(port, TOGGLING, 0);
+			break;
+		}
+		tcpm_set_cc(port, tcpm_rp_cc(port));
+		if (port->port_type == TYPEC_PORT_DRP)
+			tcpm_set_state(port, SNK_UNATTACHED, PD_T_DRP_SNK);
+		break;
+	case SRC_ATTACH_WAIT:
+		if (tcpm_port_is_debug(port))
+			tcpm_set_state(port, DEBUG_ACC_ATTACHED,
+				       PD_T_CC_DEBOUNCE);
+		else if (tcpm_port_is_audio(port))
+			tcpm_set_state(port, AUDIO_ACC_ATTACHED,
+				       PD_T_CC_DEBOUNCE);
+		else if (tcpm_port_is_source(port) && port->vbus_vsafe0v)
+			tcpm_set_state(port,
+				       tcpm_try_snk(port) ? SNK_TRY
+							  : SRC_ATTACHED,
+				       PD_T_CC_DEBOUNCE);
+		break;
+
+	case SNK_TRY:
+		port->try_snk_count++;
+		/*
+		 * Requirements:
+		 * - Do not drive vconn or vbus
+		 * - Terminate CC pins (both) to Rd
+		 * Action:
+		 * - Wait for tDRPTry (PD_T_DRP_TRY).
+		 *   Until then, ignore any state changes.
+		 */
+		tcpm_set_cc(port, TYPEC_CC_RD);
+		tcpm_set_state(port, SNK_TRY_WAIT, PD_T_DRP_TRY);
+		break;
+	case SNK_TRY_WAIT:
+		if (tcpm_port_is_sink(port)) {
+			tcpm_set_state(port, SNK_TRY_WAIT_DEBOUNCE, 0);
+		} else {
+			tcpm_set_state(port, SRC_TRYWAIT, 0);
+			port->max_wait = 0;
+		}
+		break;
+	case SNK_TRY_WAIT_DEBOUNCE:
+		tcpm_set_state(port, SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS,
+			       PD_T_TRY_CC_DEBOUNCE);
+		break;
+	case SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS:
+		if (port->vbus_present && tcpm_port_is_sink(port))
+			tcpm_set_state(port, SNK_ATTACHED, 0);
+		else
+			port->max_wait = 0;
+		break;
+	case SRC_TRYWAIT:
+		tcpm_set_cc(port, tcpm_rp_cc(port));
+		if (port->max_wait == 0) {
+			port->max_wait = jiffies +
+					 msecs_to_jiffies(PD_T_DRP_TRY);
+			tcpm_set_state(port, SRC_TRYWAIT_UNATTACHED,
+				       PD_T_DRP_TRY);
+		} else {
+			if (time_is_after_jiffies(port->max_wait))
+				tcpm_set_state(port, SRC_TRYWAIT_UNATTACHED,
+					       jiffies_to_msecs(port->max_wait -
+								jiffies));
+			else
+				tcpm_set_state(port, SNK_UNATTACHED, 0);
+		}
+		break;
+	case SRC_TRYWAIT_DEBOUNCE:
+		tcpm_set_state(port, SRC_ATTACHED, PD_T_CC_DEBOUNCE);
+		break;
+	case SRC_TRYWAIT_UNATTACHED:
+		tcpm_set_state(port, SNK_UNATTACHED, 0);
+		break;
+
+	case SRC_ATTACHED:
+		ret = tcpm_src_attach(port);
+		tcpm_set_state(port, SRC_UNATTACHED,
+			       ret < 0 ? 0 : PD_T_PS_SOURCE_ON);
+		break;
+	case SRC_STARTUP:
+		opmode =  tcpm_get_pwr_opmode(tcpm_rp_cc(port));
+		typec_set_pwr_opmode(port->typec_port, opmode);
+		port->pwr_opmode = TYPEC_PWR_MODE_USB;
+		port->caps_count = 0;
+		port->negotiated_rev = PD_MAX_REV;
+		port->message_id = 0;
+		port->rx_msgid = -1;
+		port->explicit_contract = false;
+		/* SNK -> SRC POWER/FAST_ROLE_SWAP finished */
+		if (port->ams == POWER_ROLE_SWAP ||
+		    port->ams == FAST_ROLE_SWAP)
+			tcpm_ams_finish(port);
+		if (!port->pd_supported) {
+			tcpm_set_state(port, SRC_READY, 0);
+			break;
+		}
+		port->upcoming_state = SRC_SEND_CAPABILITIES;
+		tcpm_ams_start(port, POWER_NEGOTIATION);
+		break;
+	case SRC_SEND_CAPABILITIES:
+		port->caps_count++;
+		if (port->caps_count > PD_N_CAPS_COUNT) {
+			tcpm_set_state(port, SRC_READY, 0);
+			break;
+		}
+		ret = tcpm_pd_send_source_caps(port);
+		if (ret < 0) {
+			tcpm_set_state(port, SRC_SEND_CAPABILITIES,
+				       PD_T_SEND_SOURCE_CAP);
+		} else {
+			/*
+			 * Per standard, we should clear the reset counter here.
+			 * However, that can result in state machine hang-ups.
+			 * Reset it only in READY state to improve stability.
+			 */
+			/* port->hard_reset_count = 0; */
+			port->caps_count = 0;
+			port->pd_capable = true;
+			tcpm_set_state_cond(port, SRC_SEND_CAPABILITIES_TIMEOUT,
+					    PD_T_SEND_SOURCE_CAP);
+		}
+		break;
+	case SRC_SEND_CAPABILITIES_TIMEOUT:
+		/*
+		 * Error recovery for a PD_DATA_SOURCE_CAP reply timeout.
+		 *
+		 * PD 2.0 sinks are supposed to accept src-capabilities with a
+		 * 3.0 header and simply ignore any src PDOs which the sink does
+		 * not understand such as PPS but some 2.0 sinks instead ignore
+		 * the entire PD_DATA_SOURCE_CAP message, causing contract
+		 * negotiation to fail.
+		 *
+		 * After PD_N_HARD_RESET_COUNT hard-reset attempts, we try
+		 * sending src-capabilities with a lower PD revision to
+		 * make these broken sinks work.
+		 */
+		if (port->hard_reset_count < PD_N_HARD_RESET_COUNT) {
+			tcpm_set_state(port, HARD_RESET_SEND, 0);
+		} else if (port->negotiated_rev > PD_REV20) {
+			port->negotiated_rev--;
+			port->hard_reset_count = 0;
+			tcpm_set_state(port, SRC_SEND_CAPABILITIES, 0);
+		} else {
+			tcpm_set_state(port, hard_reset_state(port), 0);
+		}
+		break;
+	case SRC_NEGOTIATE_CAPABILITIES:
+		ret = tcpm_pd_check_request(port);
+		if (ret < 0) {
+			tcpm_pd_send_control(port, PD_CTRL_REJECT);
+			if (!port->explicit_contract) {
+				tcpm_set_state(port,
+					       SRC_WAIT_NEW_CAPABILITIES, 0);
+			} else {
+				tcpm_set_state(port, SRC_READY, 0);
+			}
+		} else {
+			tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
+			tcpm_set_partner_usb_comm_capable(port,
+							  !!(port->sink_request & RDO_USB_COMM));
+			tcpm_set_state(port, SRC_TRANSITION_SUPPLY,
+				       PD_T_SRC_TRANSITION);
+		}
+		break;
+	case SRC_TRANSITION_SUPPLY:
+		/* XXX: regulator_set_voltage(vbus, ...) */
+		tcpm_pd_send_control(port, PD_CTRL_PS_RDY);
+		port->explicit_contract = true;
+		typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_PD);
+		port->pwr_opmode = TYPEC_PWR_MODE_PD;
+		tcpm_set_state_cond(port, SRC_READY, 0);
+		break;
+	case SRC_READY:
+#if 1
+		port->hard_reset_count = 0;
+#endif
+		port->try_src_count = 0;
+
+		tcpm_swap_complete(port, 0);
+		tcpm_typec_connect(port);
+
+		if (port->ams != NONE_AMS)
+			tcpm_ams_finish(port);
+		if (port->next_ams != NONE_AMS) {
+			port->ams = port->next_ams;
+			port->next_ams = NONE_AMS;
+		}
+
+		/*
+		 * If previous AMS is interrupted, switch to the upcoming
+		 * state.
+		 */
+		if (port->upcoming_state != INVALID_STATE) {
+			upcoming_state = port->upcoming_state;
+			port->upcoming_state = INVALID_STATE;
+			tcpm_set_state(port, upcoming_state, 0);
+			break;
+		}
+
+		/*
+		 * 6.4.4.3.1 Discover Identity
+		 * "The Discover Identity Command Shall only be sent to SOP when there is an
+		 * Explicit Contract."
+		 * For now, this driver only supports SOP for DISCOVER_IDENTITY, thus using
+		 * port->explicit_contract to decide whether to send the command.
+		 */
+		if (port->explicit_contract) {
+			tcpm_set_initial_svdm_version(port);
+			mod_send_discover_delayed_work(port, 0);
+		} else {
+			port->send_discover = false;
+		}
+
+		/*
+		 * 6.3.5
+		 * Sending ping messages is not necessary if
+		 * - the source operates at vSafe5V
+		 * or
+		 * - The system is not operating in PD mode
+		 * or
+		 * - Both partners are connected using a Type-C connector
+		 *
+		 * There is no actual need to send PD messages since the local
+		 * port type-c and the spec does not clearly say whether PD is
+		 * possible when type-c is connected to Type-A/B
+		 */
+		break;
+	case SRC_WAIT_NEW_CAPABILITIES:
+		/* Nothing to do... */
+		break;
+
+	/* SNK states */
+	case SNK_UNATTACHED:
+		if (!port->non_pd_role_swap)
+			tcpm_swap_complete(port, -ENOTCONN);
+		tcpm_pps_complete(port, -ENOTCONN);
+		tcpm_snk_detach(port);
+		if (tcpm_start_toggling(port, TYPEC_CC_RD)) {
+			tcpm_set_state(port, TOGGLING, 0);
+			break;
+		}
+		tcpm_set_cc(port, TYPEC_CC_RD);
+		if (port->port_type == TYPEC_PORT_DRP)
+			tcpm_set_state(port, SRC_UNATTACHED, PD_T_DRP_SRC);
+		break;
+	case SNK_ATTACH_WAIT:
+		if ((port->cc1 == TYPEC_CC_OPEN &&
+		     port->cc2 != TYPEC_CC_OPEN) ||
+		    (port->cc1 != TYPEC_CC_OPEN &&
+		     port->cc2 == TYPEC_CC_OPEN))
+			tcpm_set_state(port, SNK_DEBOUNCED,
+				       PD_T_CC_DEBOUNCE);
+		else if (tcpm_port_is_disconnected(port))
+			tcpm_set_state(port, SNK_UNATTACHED,
+				       PD_T_PD_DEBOUNCE);
+		break;
+	case SNK_DEBOUNCED:
+		if (tcpm_port_is_disconnected(port))
+			tcpm_set_state(port, SNK_UNATTACHED,
+				       PD_T_PD_DEBOUNCE);
+		else if (port->vbus_present)
+			tcpm_set_state(port,
+				       tcpm_try_src(port) ? SRC_TRY
+							  : SNK_ATTACHED,
+				       0);
+		break;
+	case SRC_TRY:
+		port->try_src_count++;
+		tcpm_set_cc(port, tcpm_rp_cc(port));
+		port->max_wait = 0;
+		tcpm_set_state(port, SRC_TRY_WAIT, 0);
+		break;
+	case SRC_TRY_WAIT:
+		if (port->max_wait == 0) {
+			port->max_wait = jiffies +
+					 msecs_to_jiffies(PD_T_DRP_TRY);
+			msecs = PD_T_DRP_TRY;
+		} else {
+			if (time_is_after_jiffies(port->max_wait))
+				msecs = jiffies_to_msecs(port->max_wait -
+							 jiffies);
+			else
+				msecs = 0;
+		}
+		tcpm_set_state(port, SNK_TRYWAIT, msecs);
+		break;
+	case SRC_TRY_DEBOUNCE:
+		tcpm_set_state(port, SRC_ATTACHED, PD_T_PD_DEBOUNCE);
+		break;
+	case SNK_TRYWAIT:
+		tcpm_set_cc(port, TYPEC_CC_RD);
+		tcpm_set_state(port, SNK_TRYWAIT_VBUS, PD_T_CC_DEBOUNCE);
+		break;
+	case SNK_TRYWAIT_VBUS:
+		/*
+		 * TCPM stays in this state indefinitely until VBUS
+		 * is detected as long as Rp is not detected for
+		 * more than a time period of tPDDebounce.
+		 */
+		if (port->vbus_present && tcpm_port_is_sink(port)) {
+			tcpm_set_state(port, SNK_ATTACHED, 0);
+			break;
+		}
+		if (!tcpm_port_is_sink(port))
+			tcpm_set_state(port, SNK_TRYWAIT_DEBOUNCE, 0);
+		break;
+	case SNK_TRYWAIT_DEBOUNCE:
+		tcpm_set_state(port, SNK_UNATTACHED, PD_T_PD_DEBOUNCE);
+		break;
+	case SNK_ATTACHED:
+		ret = tcpm_snk_attach(port);
+		if (ret < 0)
+			tcpm_set_state(port, SNK_UNATTACHED, 0);
+		else
+			tcpm_set_state(port, SNK_STARTUP, 0);
+		break;
+	case SNK_STARTUP:
+		opmode =  tcpm_get_pwr_opmode(port->polarity ?
+					      port->cc2 : port->cc1);
+		typec_set_pwr_opmode(port->typec_port, opmode);
+		port->pwr_opmode = TYPEC_PWR_MODE_USB;
+		port->negotiated_rev = PD_MAX_REV;
+		port->message_id = 0;
+		port->rx_msgid = -1;
+		port->explicit_contract = false;
+
+		if (port->ams == POWER_ROLE_SWAP ||
+		    port->ams == FAST_ROLE_SWAP)
+			/* SRC -> SNK POWER/FAST_ROLE_SWAP finished */
+			tcpm_ams_finish(port);
+
+		tcpm_set_state(port, SNK_DISCOVERY, 0);
+		break;
+	case SNK_DISCOVERY:
+		if (port->vbus_present) {
+			u32 current_lim = tcpm_get_current_limit(port);
+
+			if (port->slow_charger_loop && (current_lim > PD_P_SNK_STDBY_MW / 5))
+				current_lim = PD_P_SNK_STDBY_MW / 5;
+			tcpm_set_current_limit(port, current_lim, 5000);
+			tcpm_set_charge(port, true);
+			if (!port->pd_supported)
+				tcpm_set_state(port, SNK_READY, 0);
+			else
+				tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
+			break;
+		}
+		/*
+		 * For DRP, timeouts differ. Also, handling is supposed to be
+		 * different and much more complex (dead battery detection;
+		 * see USB power delivery specification, section 8.3.3.6.1.5.1).
+		 */
+		tcpm_set_state(port, hard_reset_state(port),
+			       port->port_type == TYPEC_PORT_DRP ?
+					PD_T_DB_DETECT : PD_T_NO_RESPONSE);
+		break;
+	case SNK_DISCOVERY_DEBOUNCE:
+		tcpm_set_state(port, SNK_DISCOVERY_DEBOUNCE_DONE,
+			       PD_T_CC_DEBOUNCE);
+		break;
+	case SNK_DISCOVERY_DEBOUNCE_DONE:
+		if (!tcpm_port_is_disconnected(port) &&
+		    tcpm_port_is_sink(port) &&
+		    ktime_after(port->delayed_runtime, ktime_get())) {
+			tcpm_set_state(port, SNK_DISCOVERY,
+				       ktime_to_ms(ktime_sub(port->delayed_runtime, ktime_get())));
+			break;
+		}
+		tcpm_set_state(port, unattached_state(port), 0);
+		break;
+	case SNK_WAIT_CAPABILITIES:
+		ret = port->tcpc->set_pd_rx(port->tcpc, true);
+		if (ret < 0) {
+			tcpm_set_state(port, SNK_READY, 0);
+			break;
+		}
+		/*
+		 * If VBUS has never been low, and we time out waiting
+		 * for source cap, try a soft reset first, in case we
+		 * were already in a stable contract before this boot.
+		 * Do this only once.
+		 */
+		if (port->vbus_never_low) {
+			port->vbus_never_low = false;
+			tcpm_set_state(port, SNK_SOFT_RESET,
+				       PD_T_SINK_WAIT_CAP);
+		} else {
+			tcpm_set_state(port, hard_reset_state(port),
+				       PD_T_SINK_WAIT_CAP);
+		}
+		break;
+	case SNK_NEGOTIATE_CAPABILITIES:
+		port->pd_capable = true;
+		tcpm_set_partner_usb_comm_capable(port,
+						  !!(port->source_caps[0] & PDO_FIXED_USB_COMM));
+		port->hard_reset_count = 0;
+		ret = tcpm_pd_send_request(port);
+		if (ret < 0) {
+			/* Restore back to the original state */
+			tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
+							       port->pps_data.active,
+							       port->supply_voltage);
+			/* Let the Source send capabilities again. */
+			tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
+		} else {
+			tcpm_set_state_cond(port, hard_reset_state(port),
+					    PD_T_SENDER_RESPONSE);
+		}
+		break;
+	case SNK_NEGOTIATE_PPS_CAPABILITIES:
+		ret = tcpm_pd_send_pps_request(port);
+		if (ret < 0) {
+			/* Restore back to the original state */
+			tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
+							       port->pps_data.active,
+							       port->supply_voltage);
+			port->pps_status = ret;
+			/*
+			 * If this was called due to updates to sink
+			 * capabilities, and pps is no longer valid, we should
+			 * safely fall back to a standard PDO.
+			 */
+			if (port->update_sink_caps)
+				tcpm_set_state(port, SNK_NEGOTIATE_CAPABILITIES, 0);
+			else
+				tcpm_set_state(port, SNK_READY, 0);
+		} else {
+			tcpm_set_state_cond(port, hard_reset_state(port),
+					    PD_T_SENDER_RESPONSE);
+		}
+		break;
+	case SNK_TRANSITION_SINK:
+		/* From the USB PD spec:
+		 * "The Sink Shall transition to Sink Standby before a positive or
+		 * negative voltage transition of VBUS. During Sink Standby
+		 * the Sink Shall reduce its power draw to pSnkStdby."
+		 *
+		 * This is not applicable to PPS though as the port can continue
+		 * to draw negotiated power without switching to standby.
+		 */
+		if (port->supply_voltage != port->req_supply_voltage && !port->pps_data.active &&
+		    port->current_limit * port->supply_voltage / 1000 > PD_P_SNK_STDBY_MW) {
+			u32 stdby_ma = PD_P_SNK_STDBY_MW * 1000 / port->supply_voltage;
+
+			tcpm_log(port, "Setting standby current %u mV @ %u mA",
+				 port->supply_voltage, stdby_ma);
+			tcpm_set_current_limit(port, stdby_ma, port->supply_voltage);
+		}
+		fallthrough;
+	case SNK_TRANSITION_SINK_VBUS:
+		tcpm_set_state(port, hard_reset_state(port),
+			       PD_T_PS_TRANSITION);
+		break;
+	case SNK_READY:
+		port->try_snk_count = 0;
+		port->update_sink_caps = false;
+		if (port->explicit_contract) {
+			typec_set_pwr_opmode(port->typec_port,
+					     TYPEC_PWR_MODE_PD);
+			port->pwr_opmode = TYPEC_PWR_MODE_PD;
+		}
+
+		if (!port->pd_capable && port->slow_charger_loop)
+			tcpm_set_current_limit(port, tcpm_get_current_limit(port), 5000);
+		tcpm_swap_complete(port, 0);
+		tcpm_typec_connect(port);
+		mod_enable_frs_delayed_work(port, 0);
+		tcpm_pps_complete(port, port->pps_status);
+
+		if (port->ams != NONE_AMS)
+			tcpm_ams_finish(port);
+		if (port->next_ams != NONE_AMS) {
+			port->ams = port->next_ams;
+			port->next_ams = NONE_AMS;
+		}
+
+		/*
+		 * If previous AMS is interrupted, switch to the upcoming
+		 * state.
+		 */
+		if (port->upcoming_state != INVALID_STATE) {
+			upcoming_state = port->upcoming_state;
+			port->upcoming_state = INVALID_STATE;
+			tcpm_set_state(port, upcoming_state, 0);
+			break;
+		}
+
+		/*
+		 * 6.4.4.3.1 Discover Identity
+		 * "The Discover Identity Command Shall only be sent to SOP when there is an
+		 * Explicit Contract."
+		 * For now, this driver only supports SOP for DISCOVER_IDENTITY, thus using
+		 * port->explicit_contract.
+		 */
+		if (port->explicit_contract) {
+			tcpm_set_initial_svdm_version(port);
+			mod_send_discover_delayed_work(port, 0);
+		} else {
+			port->send_discover = false;
+		}
+
+		power_supply_changed(port->psy);
+		break;
+
+	/* Accessory states */
+	case ACC_UNATTACHED:
+		tcpm_acc_detach(port);
+		tcpm_set_state(port, SRC_UNATTACHED, 0);
+		break;
+	case DEBUG_ACC_ATTACHED:
+	case AUDIO_ACC_ATTACHED:
+		ret = tcpm_acc_attach(port);
+		if (ret < 0)
+			tcpm_set_state(port, ACC_UNATTACHED, 0);
+		break;
+	case AUDIO_ACC_DEBOUNCE:
+		tcpm_set_state(port, ACC_UNATTACHED, PD_T_CC_DEBOUNCE);
+		break;
+
+	/* Hard_Reset states */
+	case HARD_RESET_SEND:
+		if (port->ams != NONE_AMS)
+			tcpm_ams_finish(port);
+		/*
+		 * State machine will be directed to HARD_RESET_START,
+		 * thus set upcoming_state to INVALID_STATE.
+		 */
+		port->upcoming_state = INVALID_STATE;
+		tcpm_ams_start(port, HARD_RESET);
+		break;
+	case HARD_RESET_START:
+		port->sink_cap_done = false;
+		if (port->tcpc->enable_frs)
+			port->tcpc->enable_frs(port->tcpc, false);
+		port->hard_reset_count++;
+		port->tcpc->set_pd_rx(port->tcpc, false);
+		tcpm_unregister_altmodes(port);
+		port->nr_sink_caps = 0;
+		port->send_discover = true;
+		if (port->pwr_role == TYPEC_SOURCE)
+			tcpm_set_state(port, SRC_HARD_RESET_VBUS_OFF,
+				       PD_T_PS_HARD_RESET);
+		else
+			tcpm_set_state(port, SNK_HARD_RESET_SINK_OFF, 0);
+		break;
+	case SRC_HARD_RESET_VBUS_OFF:
+		/*
+		 * 7.1.5 Response to Hard Resets
+		 * Hard Reset Signaling indicates a communication failure has occurred and the
+		 * Source Shall stop driving VCONN, Shall remove Rp from the VCONN pin and Shall
+		 * drive VBUS to vSafe0V as shown in Figure 7-9.
+		 */
+		tcpm_set_vconn(port, false);
+		tcpm_set_vbus(port, false);
+		tcpm_set_roles(port, port->self_powered, TYPEC_SOURCE,
+			       tcpm_data_role_for_source(port));
+		/*
+		 * If tcpc fails to notify vbus off, TCPM will wait for PD_T_SAFE_0V +
+		 * PD_T_SRC_RECOVER before turning vbus back on.
+		 * From Table 7-12 Sequence Description for a Source Initiated Hard Reset:
+		 * 4. Policy Engine waits tPSHardReset after sending Hard Reset Signaling and then
+		 * tells the Device Policy Manager to instruct the power supply to perform a
+		 * Hard Reset. The transition to vSafe0V Shall occur within tSafe0V (t2).
+		 * 5. After tSrcRecover the Source applies power to VBUS in an attempt to
+		 * re-establish communication with the Sink and resume USB Default Operation.
+		 * The transition to vSafe5V Shall occur within tSrcTurnOn(t4).
+		 */
+		tcpm_set_state(port, SRC_HARD_RESET_VBUS_ON, PD_T_SAFE_0V + PD_T_SRC_RECOVER);
+		break;
+	case SRC_HARD_RESET_VBUS_ON:
+		tcpm_set_vconn(port, true);
+		tcpm_set_vbus(port, true);
+		if (port->ams == HARD_RESET)
+			tcpm_ams_finish(port);
+		if (port->pd_supported)
+			port->tcpc->set_pd_rx(port->tcpc, true);
+		tcpm_set_attached_state(port, true);
+		tcpm_set_state(port, SRC_UNATTACHED, PD_T_PS_SOURCE_ON);
+		break;
+	case SNK_HARD_RESET_SINK_OFF:
+		/* Do not discharge/disconnect during hard reseet */
+		tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, 0);
+		memset(&port->pps_data, 0, sizeof(port->pps_data));
+		tcpm_set_vconn(port, false);
+		if (port->pd_capable)
+			tcpm_set_charge(port, false);
+		tcpm_set_roles(port, port->self_powered, TYPEC_SINK,
+			       tcpm_data_role_for_sink(port));
+		/*
+		 * VBUS may or may not toggle, depending on the adapter.
+		 * If it doesn't toggle, transition to SNK_HARD_RESET_SINK_ON
+		 * directly after timeout.
+		 */
+		tcpm_set_state(port, SNK_HARD_RESET_SINK_ON, PD_T_SAFE_0V);
+		break;
+	case SNK_HARD_RESET_WAIT_VBUS:
+		if (port->ams == HARD_RESET)
+			tcpm_ams_finish(port);
+		/* Assume we're disconnected if VBUS doesn't come back. */
+		tcpm_set_state(port, SNK_UNATTACHED,
+			       PD_T_SRC_RECOVER_MAX + PD_T_SRC_TURN_ON);
+		break;
+	case SNK_HARD_RESET_SINK_ON:
+		/* Note: There is no guarantee that VBUS is on in this state */
+		/*
+		 * XXX:
+		 * The specification suggests that dual mode ports in sink
+		 * mode should transition to state PE_SRC_Transition_to_default.
+		 * See USB power delivery specification chapter 8.3.3.6.1.3.
+		 * This would mean to
+		 * - turn off VCONN, reset power supply
+		 * - request hardware reset
+		 * - turn on VCONN
+		 * - Transition to state PE_Src_Startup
+		 * SNK only ports shall transition to state Snk_Startup
+		 * (see chapter 8.3.3.3.8).
+		 * Similar, dual-mode ports in source mode should transition
+		 * to PE_SNK_Transition_to_default.
+		 */
+		if (port->pd_capable) {
+			tcpm_set_current_limit(port,
+					       tcpm_get_current_limit(port),
+					       5000);
+			tcpm_set_charge(port, true);
+		}
+		if (port->ams == HARD_RESET)
+			tcpm_ams_finish(port);
+		tcpm_set_attached_state(port, true);
+		tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, VSAFE5V);
+		tcpm_set_state(port, SNK_STARTUP, 0);
+		break;
+
+	/* Soft_Reset states */
+	case SOFT_RESET:
+		port->message_id = 0;
+		port->rx_msgid = -1;
+		/* remove existing capabilities */
+		usb_power_delivery_unregister_capabilities(port->partner_source_caps);
+		port->partner_source_caps = NULL;
+		tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
+		tcpm_ams_finish(port);
+		if (port->pwr_role == TYPEC_SOURCE) {
+			port->upcoming_state = SRC_SEND_CAPABILITIES;
+			tcpm_ams_start(port, POWER_NEGOTIATION);
+		} else {
+			tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
+		}
+		break;
+	case SRC_SOFT_RESET_WAIT_SNK_TX:
+	case SNK_SOFT_RESET:
+		if (port->ams != NONE_AMS)
+			tcpm_ams_finish(port);
+		port->upcoming_state = SOFT_RESET_SEND;
+		tcpm_ams_start(port, SOFT_RESET_AMS);
+		break;
+	case SOFT_RESET_SEND:
+		port->message_id = 0;
+		port->rx_msgid = -1;
+		/* remove existing capabilities */
+		usb_power_delivery_unregister_capabilities(port->partner_source_caps);
+		port->partner_source_caps = NULL;
+		if (tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET))
+			tcpm_set_state_cond(port, hard_reset_state(port), 0);
+		else
+			tcpm_set_state_cond(port, hard_reset_state(port),
+					    PD_T_SENDER_RESPONSE);
+		break;
+
+	/* DR_Swap states */
+	case DR_SWAP_SEND:
+		tcpm_pd_send_control(port, PD_CTRL_DR_SWAP);
+		if (port->data_role == TYPEC_DEVICE || port->negotiated_rev > PD_REV20)
+			port->send_discover = true;
+		tcpm_set_state_cond(port, DR_SWAP_SEND_TIMEOUT,
+				    PD_T_SENDER_RESPONSE);
+		break;
+	case DR_SWAP_ACCEPT:
+		tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
+		if (port->data_role == TYPEC_DEVICE || port->negotiated_rev > PD_REV20)
+			port->send_discover = true;
+		tcpm_set_state_cond(port, DR_SWAP_CHANGE_DR, 0);
+		break;
+	case DR_SWAP_SEND_TIMEOUT:
+		tcpm_swap_complete(port, -ETIMEDOUT);
+		port->send_discover = false;
+		tcpm_ams_finish(port);
+		tcpm_set_state(port, ready_state(port), 0);
+		break;
+	case DR_SWAP_CHANGE_DR:
+		tcpm_unregister_altmodes(port);
+		if (port->data_role == TYPEC_HOST)
+			tcpm_set_roles(port, true, port->pwr_role,
+				       TYPEC_DEVICE);
+		else
+			tcpm_set_roles(port, true, port->pwr_role,
+				       TYPEC_HOST);
+		tcpm_ams_finish(port);
+		tcpm_set_state(port, ready_state(port), 0);
+		break;
+
+	case FR_SWAP_SEND:
+		if (tcpm_pd_send_control(port, PD_CTRL_FR_SWAP)) {
+			tcpm_set_state(port, ERROR_RECOVERY, 0);
+			break;
+		}
+		tcpm_set_state_cond(port, FR_SWAP_SEND_TIMEOUT, PD_T_SENDER_RESPONSE);
+		break;
+	case FR_SWAP_SEND_TIMEOUT:
+		tcpm_set_state(port, ERROR_RECOVERY, 0);
+		break;
+	case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF:
+		tcpm_set_state(port, ERROR_RECOVERY, PD_T_PS_SOURCE_OFF);
+		break;
+	case FR_SWAP_SNK_SRC_NEW_SINK_READY:
+		if (port->vbus_source)
+			tcpm_set_state(port, FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED, 0);
+		else
+			tcpm_set_state(port, ERROR_RECOVERY, PD_T_RECEIVER_RESPONSE);
+		break;
+	case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED:
+		tcpm_set_pwr_role(port, TYPEC_SOURCE);
+		if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY)) {
+			tcpm_set_state(port, ERROR_RECOVERY, 0);
+			break;
+		}
+		tcpm_set_cc(port, tcpm_rp_cc(port));
+		tcpm_set_state(port, SRC_STARTUP, PD_T_SWAP_SRC_START);
+		break;
+
+	/* PR_Swap states */
+	case PR_SWAP_ACCEPT:
+		tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
+		tcpm_set_state(port, PR_SWAP_START, 0);
+		break;
+	case PR_SWAP_SEND:
+		tcpm_pd_send_control(port, PD_CTRL_PR_SWAP);
+		tcpm_set_state_cond(port, PR_SWAP_SEND_TIMEOUT,
+				    PD_T_SENDER_RESPONSE);
+		break;
+	case PR_SWAP_SEND_TIMEOUT:
+		tcpm_swap_complete(port, -ETIMEDOUT);
+		tcpm_set_state(port, ready_state(port), 0);
+		break;
+	case PR_SWAP_START:
+		tcpm_apply_rc(port);
+		if (port->pwr_role == TYPEC_SOURCE)
+			tcpm_set_state(port, PR_SWAP_SRC_SNK_TRANSITION_OFF,
+				       PD_T_SRC_TRANSITION);
+		else
+			tcpm_set_state(port, PR_SWAP_SNK_SRC_SINK_OFF, 0);
+		break;
+	case PR_SWAP_SRC_SNK_TRANSITION_OFF:
+		/*
+		 * Prevent vbus discharge circuit from turning on during PR_SWAP
+		 * as this is not a disconnect.
+		 */
+		tcpm_set_vbus(port, false);
+		port->explicit_contract = false;
+		/* allow time for Vbus discharge, must be < tSrcSwapStdby */
+		tcpm_set_state(port, PR_SWAP_SRC_SNK_SOURCE_OFF,
+			       PD_T_SRCSWAPSTDBY);
+		break;
+	case PR_SWAP_SRC_SNK_SOURCE_OFF:
+		tcpm_set_cc(port, TYPEC_CC_RD);
+		/* allow CC debounce */
+		tcpm_set_state(port, PR_SWAP_SRC_SNK_SOURCE_OFF_CC_DEBOUNCED,
+			       PD_T_CC_DEBOUNCE);
+		break;
+	case PR_SWAP_SRC_SNK_SOURCE_OFF_CC_DEBOUNCED:
+		/*
+		 * USB-PD standard, 6.2.1.4, Port Power Role:
+		 * "During the Power Role Swap Sequence, for the initial Source
+		 * Port, the Port Power Role field shall be set to Sink in the
+		 * PS_RDY Message indicating that the initial Source’s power
+		 * supply is turned off"
+		 */
+		tcpm_set_pwr_role(port, TYPEC_SINK);
+		if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY)) {
+			tcpm_set_state(port, ERROR_RECOVERY, 0);
+			break;
+		}
+		tcpm_set_state(port, ERROR_RECOVERY, PD_T_PS_SOURCE_ON_PRS);
+		break;
+	case PR_SWAP_SRC_SNK_SINK_ON:
+		tcpm_enable_auto_vbus_discharge(port, true);
+		/* Set the vbus disconnect threshold for implicit contract */
+		tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, VSAFE5V);
+		tcpm_set_state(port, SNK_STARTUP, 0);
+		break;
+	case PR_SWAP_SNK_SRC_SINK_OFF:
+		/* will be source, remove existing capabilities */
+		usb_power_delivery_unregister_capabilities(port->partner_source_caps);
+		port->partner_source_caps = NULL;
+		/*
+		 * Prevent vbus discharge circuit from turning on during PR_SWAP
+		 * as this is not a disconnect.
+		 */
+		tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB,
+						       port->pps_data.active, 0);
+		tcpm_set_charge(port, false);
+		tcpm_set_state(port, hard_reset_state(port),
+			       PD_T_PS_SOURCE_OFF);
+		break;
+	case PR_SWAP_SNK_SRC_SOURCE_ON:
+		tcpm_enable_auto_vbus_discharge(port, true);
+		tcpm_set_cc(port, tcpm_rp_cc(port));
+		tcpm_set_vbus(port, true);
+		/*
+		 * allow time VBUS ramp-up, must be < tNewSrc
+		 * Also, this window overlaps with CC debounce as well.
+		 * So, Wait for the max of two which is PD_T_NEWSRC
+		 */
+		tcpm_set_state(port, PR_SWAP_SNK_SRC_SOURCE_ON_VBUS_RAMPED_UP,
+			       PD_T_NEWSRC);
+		break;
+	case PR_SWAP_SNK_SRC_SOURCE_ON_VBUS_RAMPED_UP:
+		/*
+		 * USB PD standard, 6.2.1.4:
+		 * "Subsequent Messages initiated by the Policy Engine,
+		 * such as the PS_RDY Message sent to indicate that Vbus
+		 * is ready, will have the Port Power Role field set to
+		 * Source."
+		 */
+		tcpm_set_pwr_role(port, TYPEC_SOURCE);
+		tcpm_pd_send_control(port, PD_CTRL_PS_RDY);
+		tcpm_set_state(port, SRC_STARTUP, PD_T_SWAP_SRC_START);
+		break;
+
+	case VCONN_SWAP_ACCEPT:
+		tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
+		tcpm_ams_finish(port);
+		tcpm_set_state(port, VCONN_SWAP_START, 0);
+		break;
+	case VCONN_SWAP_SEND:
+		tcpm_pd_send_control(port, PD_CTRL_VCONN_SWAP);
+		tcpm_set_state(port, VCONN_SWAP_SEND_TIMEOUT,
+			       PD_T_SENDER_RESPONSE);
+		break;
+	case VCONN_SWAP_SEND_TIMEOUT:
+		tcpm_swap_complete(port, -ETIMEDOUT);
+		tcpm_set_state(port, ready_state(port), 0);
+		break;
+	case VCONN_SWAP_START:
+		if (port->vconn_role == TYPEC_SOURCE)
+			tcpm_set_state(port, VCONN_SWAP_WAIT_FOR_VCONN, 0);
+		else
+			tcpm_set_state(port, VCONN_SWAP_TURN_ON_VCONN, 0);
+		break;
+	case VCONN_SWAP_WAIT_FOR_VCONN:
+		tcpm_set_state(port, hard_reset_state(port),
+			       PD_T_VCONN_SOURCE_ON);
+		break;
+	case VCONN_SWAP_TURN_ON_VCONN:
+		tcpm_set_vconn(port, true);
+		tcpm_pd_send_control(port, PD_CTRL_PS_RDY);
+		tcpm_set_state(port, ready_state(port), 0);
+		break;
+	case VCONN_SWAP_TURN_OFF_VCONN:
+		tcpm_set_vconn(port, false);
+		tcpm_set_state(port, ready_state(port), 0);
+		break;
+
+	case DR_SWAP_CANCEL:
+	case PR_SWAP_CANCEL:
+	case VCONN_SWAP_CANCEL:
+		tcpm_swap_complete(port, port->swap_status);
+		if (port->pwr_role == TYPEC_SOURCE)
+			tcpm_set_state(port, SRC_READY, 0);
+		else
+			tcpm_set_state(port, SNK_READY, 0);
+		break;
+	case FR_SWAP_CANCEL:
+		if (port->pwr_role == TYPEC_SOURCE)
+			tcpm_set_state(port, SRC_READY, 0);
+		else
+			tcpm_set_state(port, SNK_READY, 0);
+		break;
+
+	case BIST_RX:
+		switch (BDO_MODE_MASK(port->bist_request)) {
+		case BDO_MODE_CARRIER2:
+			tcpm_pd_transmit(port, TCPC_TX_BIST_MODE_2, NULL);
+			tcpm_set_state(port, unattached_state(port),
+				       PD_T_BIST_CONT_MODE);
+			break;
+		case BDO_MODE_TESTDATA:
+			if (port->tcpc->set_bist_data) {
+				tcpm_log(port, "Enable BIST MODE TESTDATA");
+				port->tcpc->set_bist_data(port->tcpc, true);
+			}
+			break;
+		default:
+			break;
+		}
+		break;
+	case GET_STATUS_SEND:
+		tcpm_pd_send_control(port, PD_CTRL_GET_STATUS);
+		tcpm_set_state(port, GET_STATUS_SEND_TIMEOUT,
+			       PD_T_SENDER_RESPONSE);
+		break;
+	case GET_STATUS_SEND_TIMEOUT:
+		tcpm_set_state(port, ready_state(port), 0);
+		break;
+	case GET_PPS_STATUS_SEND:
+		tcpm_pd_send_control(port, PD_CTRL_GET_PPS_STATUS);
+		tcpm_set_state(port, GET_PPS_STATUS_SEND_TIMEOUT,
+			       PD_T_SENDER_RESPONSE);
+		break;
+	case GET_PPS_STATUS_SEND_TIMEOUT:
+		tcpm_set_state(port, ready_state(port), 0);
+		break;
+	case GET_SINK_CAP:
+		tcpm_pd_send_control(port, PD_CTRL_GET_SINK_CAP);
+		tcpm_set_state(port, GET_SINK_CAP_TIMEOUT, PD_T_SENDER_RESPONSE);
+		break;
+	case GET_SINK_CAP_TIMEOUT:
+		port->sink_cap_done = true;
+		tcpm_set_state(port, ready_state(port), 0);
+		break;
+	case ERROR_RECOVERY:
+		tcpm_swap_complete(port, -EPROTO);
+		tcpm_pps_complete(port, -EPROTO);
+		tcpm_set_state(port, PORT_RESET, 0);
+		break;
+	case PORT_RESET:
+		tcpm_reset_port(port);
+		tcpm_set_cc(port, TYPEC_CC_OPEN);
+		tcpm_set_state(port, PORT_RESET_WAIT_OFF,
+			       PD_T_ERROR_RECOVERY);
+		break;
+	case PORT_RESET_WAIT_OFF:
+		tcpm_set_state(port,
+			       tcpm_default_state(port),
+			       port->vbus_present ? PD_T_PS_SOURCE_OFF : 0);
+		break;
+
+	/* AMS intermediate state */
+	case AMS_START:
+		if (port->upcoming_state == INVALID_STATE) {
+			tcpm_set_state(port, port->pwr_role == TYPEC_SOURCE ?
+				       SRC_READY : SNK_READY, 0);
+			break;
+		}
+
+		upcoming_state = port->upcoming_state;
+		port->upcoming_state = INVALID_STATE;
+		tcpm_set_state(port, upcoming_state, 0);
+		break;
+
+	/* Chunk state */
+	case CHUNK_NOT_SUPP:
+		tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP);
+		tcpm_set_state(port, port->pwr_role == TYPEC_SOURCE ? SRC_READY : SNK_READY, 0);
+		break;
+	default:
+		WARN(1, "Unexpected port state %d\n", port->state);
+		break;
+	}
+}
+
+static void tcpm_state_machine_work(struct kthread_work *work)
+{
+	struct tcpm_port *port = container_of(work, struct tcpm_port, state_machine);
+	enum tcpm_state prev_state;
+
+	mutex_lock(&port->lock);
+	port->state_machine_running = true;
+
+	if (port->queued_message && tcpm_send_queued_message(port))
+		goto done;
+
+	/* If we were queued due to a delayed state change, update it now */
+	if (port->delayed_state) {
+		tcpm_log(port, "state change %s -> %s [delayed %ld ms]",
+			 tcpm_states[port->state],
+			 tcpm_states[port->delayed_state], port->delay_ms);
+		port->prev_state = port->state;
+		port->state = port->delayed_state;
+		port->delayed_state = INVALID_STATE;
+	}
+
+	/*
+	 * Continue running as long as we have (non-delayed) state changes
+	 * to make.
+	 */
+	do {
+		prev_state = port->state;
+		run_state_machine(port);
+		if (port->queued_message)
+			tcpm_send_queued_message(port);
+	} while (port->state != prev_state && !port->delayed_state);
+
+done:
+	port->state_machine_running = false;
+	mutex_unlock(&port->lock);
+}
+
+static void _tcpm_cc_change(struct tcpm_port *port, enum typec_cc_status cc1,
+			    enum typec_cc_status cc2)
+{
+	enum typec_cc_status old_cc1, old_cc2;
+	enum tcpm_state new_state;
+
+	old_cc1 = port->cc1;
+	old_cc2 = port->cc2;
+	port->cc1 = cc1;
+	port->cc2 = cc2;
+
+	tcpm_log_force(port,
+		       "CC1: %u -> %u, CC2: %u -> %u [state %s, polarity %d, %s]",
+		       old_cc1, cc1, old_cc2, cc2, tcpm_states[port->state],
+		       port->polarity,
+		       tcpm_port_is_disconnected(port) ? "disconnected"
+						       : "connected");
+
+	switch (port->state) {
+	case TOGGLING:
+		if (tcpm_port_is_debug(port) || tcpm_port_is_audio(port) ||
+		    tcpm_port_is_source(port))
+			tcpm_set_state(port, SRC_ATTACH_WAIT, 0);
+		else if (tcpm_port_is_sink(port))
+			tcpm_set_state(port, SNK_ATTACH_WAIT, 0);
+		break;
+	case SRC_UNATTACHED:
+	case ACC_UNATTACHED:
+		if (tcpm_port_is_debug(port) || tcpm_port_is_audio(port) ||
+		    tcpm_port_is_source(port))
+			tcpm_set_state(port, SRC_ATTACH_WAIT, 0);
+		break;
+	case SRC_ATTACH_WAIT:
+		if (tcpm_port_is_disconnected(port) ||
+		    tcpm_port_is_audio_detached(port))
+			tcpm_set_state(port, SRC_UNATTACHED, 0);
+		else if (cc1 != old_cc1 || cc2 != old_cc2)
+			tcpm_set_state(port, SRC_ATTACH_WAIT, 0);
+		break;
+	case SRC_ATTACHED:
+	case SRC_STARTUP:
+	case SRC_SEND_CAPABILITIES:
+	case SRC_READY:
+		if (tcpm_port_is_disconnected(port) ||
+		    !tcpm_port_is_source(port)) {
+			if (port->port_type == TYPEC_PORT_SRC)
+				tcpm_set_state(port, SRC_UNATTACHED, tcpm_wait_for_discharge(port));
+			else
+				tcpm_set_state(port, SNK_UNATTACHED, tcpm_wait_for_discharge(port));
+		}
+		break;
+	case SNK_UNATTACHED:
+		if (tcpm_port_is_sink(port))
+			tcpm_set_state(port, SNK_ATTACH_WAIT, 0);
+		break;
+	case SNK_ATTACH_WAIT:
+		if ((port->cc1 == TYPEC_CC_OPEN &&
+		     port->cc2 != TYPEC_CC_OPEN) ||
+		    (port->cc1 != TYPEC_CC_OPEN &&
+		     port->cc2 == TYPEC_CC_OPEN))
+			new_state = SNK_DEBOUNCED;
+		else if (tcpm_port_is_disconnected(port))
+			new_state = SNK_UNATTACHED;
+		else
+			break;
+		if (new_state != port->delayed_state)
+			tcpm_set_state(port, SNK_ATTACH_WAIT, 0);
+		break;
+	case SNK_DEBOUNCED:
+		if (tcpm_port_is_disconnected(port))
+			new_state = SNK_UNATTACHED;
+		else if (port->vbus_present)
+			new_state = tcpm_try_src(port) ? SRC_TRY : SNK_ATTACHED;
+		else
+			new_state = SNK_UNATTACHED;
+		if (new_state != port->delayed_state)
+			tcpm_set_state(port, SNK_DEBOUNCED, 0);
+		break;
+	case SNK_READY:
+		/*
+		 * EXIT condition is based primarily on vbus disconnect and CC is secondary.
+		 * "A port that has entered into USB PD communications with the Source and
+		 * has seen the CC voltage exceed vRd-USB may monitor the CC pin to detect
+		 * cable disconnect in addition to monitoring VBUS.
+		 *
+		 * A port that is monitoring the CC voltage for disconnect (but is not in
+		 * the process of a USB PD PR_Swap or USB PD FR_Swap) shall transition to
+		 * Unattached.SNK within tSinkDisconnect after the CC voltage remains below
+		 * vRd-USB for tPDDebounce."
+		 *
+		 * When set_auto_vbus_discharge_threshold is enabled, CC pins go
+		 * away before vbus decays to disconnect threshold. Allow
+		 * disconnect to be driven by vbus disconnect when auto vbus
+		 * discharge is enabled.
+		 */
+		if (!port->auto_vbus_discharge_enabled && tcpm_port_is_disconnected(port))
+			tcpm_set_state(port, unattached_state(port), 0);
+		else if (!port->pd_capable &&
+			 (cc1 != old_cc1 || cc2 != old_cc2))
+			tcpm_set_current_limit(port,
+					       tcpm_get_current_limit(port),
+					       5000);
+		break;
+
+	case AUDIO_ACC_ATTACHED:
+		if (cc1 == TYPEC_CC_OPEN || cc2 == TYPEC_CC_OPEN)
+			tcpm_set_state(port, AUDIO_ACC_DEBOUNCE, 0);
+		break;
+	case AUDIO_ACC_DEBOUNCE:
+		if (tcpm_port_is_audio(port))
+			tcpm_set_state(port, AUDIO_ACC_ATTACHED, 0);
+		break;
+
+	case DEBUG_ACC_ATTACHED:
+		if (cc1 == TYPEC_CC_OPEN || cc2 == TYPEC_CC_OPEN)
+			tcpm_set_state(port, ACC_UNATTACHED, 0);
+		break;
+
+	case SNK_TRY:
+		/* Do nothing, waiting for timeout */
+		break;
+
+	case SNK_DISCOVERY:
+		/* CC line is unstable, wait for debounce */
+		if (tcpm_port_is_disconnected(port))
+			tcpm_set_state(port, SNK_DISCOVERY_DEBOUNCE, 0);
+		break;
+	case SNK_DISCOVERY_DEBOUNCE:
+		break;
+
+	case SRC_TRYWAIT:
+		/* Hand over to state machine if needed */
+		if (!port->vbus_present && tcpm_port_is_source(port))
+			tcpm_set_state(port, SRC_TRYWAIT_DEBOUNCE, 0);
+		break;
+	case SRC_TRYWAIT_DEBOUNCE:
+		if (port->vbus_present || !tcpm_port_is_source(port))
+			tcpm_set_state(port, SRC_TRYWAIT, 0);
+		break;
+	case SNK_TRY_WAIT_DEBOUNCE:
+		if (!tcpm_port_is_sink(port)) {
+			port->max_wait = 0;
+			tcpm_set_state(port, SRC_TRYWAIT, 0);
+		}
+		break;
+	case SRC_TRY_WAIT:
+		if (tcpm_port_is_source(port))
+			tcpm_set_state(port, SRC_TRY_DEBOUNCE, 0);
+		break;
+	case SRC_TRY_DEBOUNCE:
+		tcpm_set_state(port, SRC_TRY_WAIT, 0);
+		break;
+	case SNK_TRYWAIT_DEBOUNCE:
+		if (tcpm_port_is_sink(port))
+			tcpm_set_state(port, SNK_TRYWAIT_VBUS, 0);
+		break;
+	case SNK_TRYWAIT_VBUS:
+		if (!tcpm_port_is_sink(port))
+			tcpm_set_state(port, SNK_TRYWAIT_DEBOUNCE, 0);
+		break;
+	case SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS:
+		if (!tcpm_port_is_sink(port))
+			tcpm_set_state(port, SRC_TRYWAIT, PD_T_TRY_CC_DEBOUNCE);
+		else
+			tcpm_set_state(port, SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS, 0);
+		break;
+	case SNK_TRYWAIT:
+		/* Do nothing, waiting for tCCDebounce */
+		break;
+	case PR_SWAP_SNK_SRC_SINK_OFF:
+	case PR_SWAP_SRC_SNK_TRANSITION_OFF:
+	case PR_SWAP_SRC_SNK_SOURCE_OFF:
+	case PR_SWAP_SRC_SNK_SOURCE_OFF_CC_DEBOUNCED:
+	case PR_SWAP_SNK_SRC_SOURCE_ON:
+		/*
+		 * CC state change is expected in PR_SWAP
+		 * Ignore it.
+		 */
+		break;
+	case FR_SWAP_SEND:
+	case FR_SWAP_SEND_TIMEOUT:
+	case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF:
+	case FR_SWAP_SNK_SRC_NEW_SINK_READY:
+	case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED:
+		/* Do nothing, CC change expected */
+		break;
+
+	case PORT_RESET:
+	case PORT_RESET_WAIT_OFF:
+		/*
+		 * State set back to default mode once the timer completes.
+		 * Ignore CC changes here.
+		 */
+		break;
+	default:
+		/*
+		 * While acting as sink and auto vbus discharge is enabled, Allow disconnect
+		 * to be driven by vbus disconnect.
+		 */
+		if (tcpm_port_is_disconnected(port) && !(port->pwr_role == TYPEC_SINK &&
+							 port->auto_vbus_discharge_enabled))
+			tcpm_set_state(port, unattached_state(port), 0);
+		break;
+	}
+}
+
+static void _tcpm_pd_vbus_on(struct tcpm_port *port)
+{
+	tcpm_log_force(port, "VBUS on");
+	port->vbus_present = true;
+	/*
+	 * When vbus_present is true i.e. Voltage at VBUS is greater than VSAFE5V implicitly
+	 * states that vbus is not at VSAFE0V, hence clear the vbus_vsafe0v flag here.
+	 */
+	port->vbus_vsafe0v = false;
+
+	switch (port->state) {
+	case SNK_TRANSITION_SINK_VBUS:
+		port->explicit_contract = true;
+		tcpm_set_state(port, SNK_READY, 0);
+		break;
+	case SNK_DISCOVERY:
+		tcpm_set_state(port, SNK_DISCOVERY, 0);
+		break;
+
+	case SNK_DEBOUNCED:
+		tcpm_set_state(port, tcpm_try_src(port) ? SRC_TRY
+							: SNK_ATTACHED,
+				       0);
+		break;
+	case SNK_HARD_RESET_WAIT_VBUS:
+		tcpm_set_state(port, SNK_HARD_RESET_SINK_ON, 0);
+		break;
+	case SRC_ATTACHED:
+		tcpm_set_state(port, SRC_STARTUP, 0);
+		break;
+	case SRC_HARD_RESET_VBUS_ON:
+		tcpm_set_state(port, SRC_STARTUP, 0);
+		break;
+
+	case SNK_TRY:
+		/* Do nothing, waiting for timeout */
+		break;
+	case SRC_TRYWAIT:
+		/* Do nothing, Waiting for Rd to be detected */
+		break;
+	case SRC_TRYWAIT_DEBOUNCE:
+		tcpm_set_state(port, SRC_TRYWAIT, 0);
+		break;
+	case SNK_TRY_WAIT_DEBOUNCE:
+		/* Do nothing, waiting for PD_DEBOUNCE to do be done */
+		break;
+	case SNK_TRYWAIT:
+		/* Do nothing, waiting for tCCDebounce */
+		break;
+	case SNK_TRYWAIT_VBUS:
+		if (tcpm_port_is_sink(port))
+			tcpm_set_state(port, SNK_ATTACHED, 0);
+		break;
+	case SNK_TRYWAIT_DEBOUNCE:
+		/* Do nothing, waiting for Rp */
+		break;
+	case SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS:
+		if (port->vbus_present && tcpm_port_is_sink(port))
+			tcpm_set_state(port, SNK_ATTACHED, 0);
+		break;
+	case SRC_TRY_WAIT:
+	case SRC_TRY_DEBOUNCE:
+		/* Do nothing, waiting for sink detection */
+		break;
+	case FR_SWAP_SEND:
+	case FR_SWAP_SEND_TIMEOUT:
+	case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF:
+	case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED:
+		if (port->tcpc->frs_sourcing_vbus)
+			port->tcpc->frs_sourcing_vbus(port->tcpc);
+		break;
+	case FR_SWAP_SNK_SRC_NEW_SINK_READY:
+		if (port->tcpc->frs_sourcing_vbus)
+			port->tcpc->frs_sourcing_vbus(port->tcpc);
+		tcpm_set_state(port, FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED, 0);
+		break;
+
+	case PORT_RESET:
+	case PORT_RESET_WAIT_OFF:
+		/*
+		 * State set back to default mode once the timer completes.
+		 * Ignore vbus changes here.
+		 */
+		break;
+
+	default:
+		break;
+	}
+}
+
+static void _tcpm_pd_vbus_off(struct tcpm_port *port)
+{
+	tcpm_log_force(port, "VBUS off");
+	port->vbus_present = false;
+	port->vbus_never_low = false;
+	switch (port->state) {
+	case SNK_HARD_RESET_SINK_OFF:
+		tcpm_set_state(port, SNK_HARD_RESET_WAIT_VBUS, 0);
+		break;
+	case HARD_RESET_SEND:
+		break;
+	case SNK_TRY:
+		/* Do nothing, waiting for timeout */
+		break;
+	case SRC_TRYWAIT:
+		/* Hand over to state machine if needed */
+		if (tcpm_port_is_source(port))
+			tcpm_set_state(port, SRC_TRYWAIT_DEBOUNCE, 0);
+		break;
+	case SNK_TRY_WAIT_DEBOUNCE:
+		/* Do nothing, waiting for PD_DEBOUNCE to do be done */
+		break;
+	case SNK_TRYWAIT:
+	case SNK_TRYWAIT_VBUS:
+	case SNK_TRYWAIT_DEBOUNCE:
+		break;
+	case SNK_ATTACH_WAIT:
+	case SNK_DEBOUNCED:
+		/* Do nothing, as TCPM is still waiting for vbus to reaach VSAFE5V to connect */
+		break;
+
+	case SNK_NEGOTIATE_CAPABILITIES:
+		break;
+
+	case PR_SWAP_SRC_SNK_TRANSITION_OFF:
+		tcpm_set_state(port, PR_SWAP_SRC_SNK_SOURCE_OFF, 0);
+		break;
+
+	case PR_SWAP_SNK_SRC_SINK_OFF:
+		/* Do nothing, expected */
+		break;
+
+	case PR_SWAP_SNK_SRC_SOURCE_ON:
+		/*
+		 * Do nothing when vbus off notification is received.
+		 * TCPM can wait for PD_T_NEWSRC in PR_SWAP_SNK_SRC_SOURCE_ON
+		 * for the vbus source to ramp up.
+		 */
+		break;
+
+	case PORT_RESET_WAIT_OFF:
+		tcpm_set_state(port, tcpm_default_state(port), 0);
+		break;
+
+	case SRC_TRY_WAIT:
+	case SRC_TRY_DEBOUNCE:
+		/* Do nothing, waiting for sink detection */
+		break;
+
+	case SRC_STARTUP:
+	case SRC_SEND_CAPABILITIES:
+	case SRC_SEND_CAPABILITIES_TIMEOUT:
+	case SRC_NEGOTIATE_CAPABILITIES:
+	case SRC_TRANSITION_SUPPLY:
+	case SRC_READY:
+	case SRC_WAIT_NEW_CAPABILITIES:
+		/*
+		 * Force to unattached state to re-initiate connection.
+		 * DRP port should move to Unattached.SNK instead of Unattached.SRC if
+		 * sink removed. Although sink removal here is due to source's vbus collapse,
+		 * treat it the same way for consistency.
+		 */
+		if (port->port_type == TYPEC_PORT_SRC)
+			tcpm_set_state(port, SRC_UNATTACHED, tcpm_wait_for_discharge(port));
+		else
+			tcpm_set_state(port, SNK_UNATTACHED, tcpm_wait_for_discharge(port));
+		break;
+
+	case PORT_RESET:
+		/*
+		 * State set back to default mode once the timer completes.
+		 * Ignore vbus changes here.
+		 */
+		break;
+
+	case FR_SWAP_SEND:
+	case FR_SWAP_SEND_TIMEOUT:
+	case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF:
+	case FR_SWAP_SNK_SRC_NEW_SINK_READY:
+	case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED:
+		/* Do nothing, vbus drop expected */
+		break;
+
+	case SNK_HARD_RESET_WAIT_VBUS:
+		/* Do nothing, its OK to receive vbus off events */
+		break;
+
+	default:
+		if (port->pwr_role == TYPEC_SINK && port->attached)
+			tcpm_set_state(port, SNK_UNATTACHED, tcpm_wait_for_discharge(port));
+		break;
+	}
+}
+
+static void _tcpm_pd_vbus_vsafe0v(struct tcpm_port *port)
+{
+	tcpm_log_force(port, "VBUS VSAFE0V");
+	port->vbus_vsafe0v = true;
+	switch (port->state) {
+	case SRC_HARD_RESET_VBUS_OFF:
+		/*
+		 * After establishing the vSafe0V voltage condition on VBUS, the Source Shall wait
+		 * tSrcRecover before re-applying VCONN and restoring VBUS to vSafe5V.
+		 */
+		tcpm_set_state(port, SRC_HARD_RESET_VBUS_ON, PD_T_SRC_RECOVER);
+		break;
+	case SRC_ATTACH_WAIT:
+		if (tcpm_port_is_source(port))
+			tcpm_set_state(port, tcpm_try_snk(port) ? SNK_TRY : SRC_ATTACHED,
+				       PD_T_CC_DEBOUNCE);
+		break;
+	case SRC_STARTUP:
+	case SRC_SEND_CAPABILITIES:
+	case SRC_SEND_CAPABILITIES_TIMEOUT:
+	case SRC_NEGOTIATE_CAPABILITIES:
+	case SRC_TRANSITION_SUPPLY:
+	case SRC_READY:
+	case SRC_WAIT_NEW_CAPABILITIES:
+		if (port->auto_vbus_discharge_enabled) {
+			if (port->port_type == TYPEC_PORT_SRC)
+				tcpm_set_state(port, SRC_UNATTACHED, 0);
+			else
+				tcpm_set_state(port, SNK_UNATTACHED, 0);
+		}
+		break;
+	case PR_SWAP_SNK_SRC_SINK_OFF:
+	case PR_SWAP_SNK_SRC_SOURCE_ON:
+		/* Do nothing, vsafe0v is expected during transition */
+		break;
+	case SNK_ATTACH_WAIT:
+	case SNK_DEBOUNCED:
+		/*Do nothing, still waiting for VSAFE5V for connect */
+		break;
+	case SNK_HARD_RESET_WAIT_VBUS:
+		/* Do nothing, its OK to receive vbus off events */
+		break;
+	default:
+		if (port->pwr_role == TYPEC_SINK && port->auto_vbus_discharge_enabled)
+			tcpm_set_state(port, SNK_UNATTACHED, 0);
+		break;
+	}
+}
+
+static void _tcpm_pd_hard_reset(struct tcpm_port *port)
+{
+	tcpm_log_force(port, "Received hard reset");
+	if (port->bist_request == BDO_MODE_TESTDATA && port->tcpc->set_bist_data)
+		port->tcpc->set_bist_data(port->tcpc, false);
+
+	switch (port->state) {
+	case ERROR_RECOVERY:
+	case PORT_RESET:
+	case PORT_RESET_WAIT_OFF:
+		return;
+	default:
+		break;
+	}
+
+	if (port->ams != NONE_AMS)
+		port->ams = NONE_AMS;
+	if (port->hard_reset_count < PD_N_HARD_RESET_COUNT)
+		port->ams = HARD_RESET;
+	/*
+	 * If we keep receiving hard reset requests, executing the hard reset
+	 * must have failed. Revert to error recovery if that happens.
+	 */
+	tcpm_set_state(port,
+		       port->hard_reset_count < PD_N_HARD_RESET_COUNT ?
+				HARD_RESET_START : ERROR_RECOVERY,
+		       0);
+}
+
+static void tcpm_pd_event_handler(struct kthread_work *work)
+{
+	struct tcpm_port *port = container_of(work, struct tcpm_port,
+					      event_work);
+	u32 events;
+
+	mutex_lock(&port->lock);
+
+	spin_lock(&port->pd_event_lock);
+	while (port->pd_events) {
+		events = port->pd_events;
+		port->pd_events = 0;
+		spin_unlock(&port->pd_event_lock);
+		if (events & TCPM_RESET_EVENT)
+			_tcpm_pd_hard_reset(port);
+		if (events & TCPM_VBUS_EVENT) {
+			bool vbus;
+
+			vbus = port->tcpc->get_vbus(port->tcpc);
+			if (vbus) {
+				_tcpm_pd_vbus_on(port);
+			} else {
+				_tcpm_pd_vbus_off(port);
+				/*
+				 * When TCPC does not support detecting vsafe0v voltage level,
+				 * treat vbus absent as vsafe0v. Else invoke is_vbus_vsafe0v
+				 * to see if vbus has discharge to VSAFE0V.
+				 */
+				if (!port->tcpc->is_vbus_vsafe0v ||
+				    port->tcpc->is_vbus_vsafe0v(port->tcpc))
+					_tcpm_pd_vbus_vsafe0v(port);
+			}
+		}
+		if (events & TCPM_CC_EVENT) {
+			enum typec_cc_status cc1, cc2;
+
+			if (port->tcpc->get_cc(port->tcpc, &cc1, &cc2) == 0)
+				_tcpm_cc_change(port, cc1, cc2);
+		}
+		if (events & TCPM_FRS_EVENT) {
+			if (port->state == SNK_READY) {
+				int ret;
+
+				port->upcoming_state = FR_SWAP_SEND;
+				ret = tcpm_ams_start(port, FAST_ROLE_SWAP);
+				if (ret == -EAGAIN)
+					port->upcoming_state = INVALID_STATE;
+			} else {
+				tcpm_log(port, "Discarding FRS_SIGNAL! Not in sink ready");
+			}
+		}
+		if (events & TCPM_SOURCING_VBUS) {
+			tcpm_log(port, "sourcing vbus");
+			/*
+			 * In fast role swap case TCPC autonomously sources vbus. Set vbus_source
+			 * true as TCPM wouldn't have called tcpm_set_vbus.
+			 *
+			 * When vbus is sourced on the command on TCPM i.e. TCPM called
+			 * tcpm_set_vbus to source vbus, vbus_source would already be true.
+			 */
+			port->vbus_source = true;
+			_tcpm_pd_vbus_on(port);
+		}
+
+		spin_lock(&port->pd_event_lock);
+	}
+	spin_unlock(&port->pd_event_lock);
+	mutex_unlock(&port->lock);
+}
+
+void tcpm_cc_change(struct tcpm_port *port)
+{
+	spin_lock(&port->pd_event_lock);
+	port->pd_events |= TCPM_CC_EVENT;
+	spin_unlock(&port->pd_event_lock);
+	kthread_queue_work(port->wq, &port->event_work);
+}
+EXPORT_SYMBOL_GPL(tcpm_cc_change);
+
+void tcpm_vbus_change(struct tcpm_port *port)
+{
+	spin_lock(&port->pd_event_lock);
+	port->pd_events |= TCPM_VBUS_EVENT;
+	spin_unlock(&port->pd_event_lock);
+	kthread_queue_work(port->wq, &port->event_work);
+}
+EXPORT_SYMBOL_GPL(tcpm_vbus_change);
+
+void tcpm_pd_hard_reset(struct tcpm_port *port)
+{
+	spin_lock(&port->pd_event_lock);
+	port->pd_events = TCPM_RESET_EVENT;
+	spin_unlock(&port->pd_event_lock);
+	kthread_queue_work(port->wq, &port->event_work);
+}
+EXPORT_SYMBOL_GPL(tcpm_pd_hard_reset);
+
+void tcpm_sink_frs(struct tcpm_port *port)
+{
+	spin_lock(&port->pd_event_lock);
+	port->pd_events |= TCPM_FRS_EVENT;
+	spin_unlock(&port->pd_event_lock);
+	kthread_queue_work(port->wq, &port->event_work);
+}
+EXPORT_SYMBOL_GPL(tcpm_sink_frs);
+
+void tcpm_sourcing_vbus(struct tcpm_port *port)
+{
+	spin_lock(&port->pd_event_lock);
+	port->pd_events |= TCPM_SOURCING_VBUS;
+	spin_unlock(&port->pd_event_lock);
+	kthread_queue_work(port->wq, &port->event_work);
+}
+EXPORT_SYMBOL_GPL(tcpm_sourcing_vbus);
+
+static void tcpm_enable_frs_work(struct kthread_work *work)
+{
+	struct tcpm_port *port = container_of(work, struct tcpm_port, enable_frs);
+	int ret;
+
+	mutex_lock(&port->lock);
+	/* Not FRS capable */
+	if (!port->connected || port->port_type != TYPEC_PORT_DRP ||
+	    port->pwr_opmode != TYPEC_PWR_MODE_PD ||
+	    !port->tcpc->enable_frs ||
+	    /* Sink caps queried */
+	    port->sink_cap_done || port->negotiated_rev < PD_REV30)
+		goto unlock;
+
+	/* Send when the state machine is idle */
+	if (port->state != SNK_READY || port->vdm_sm_running || port->send_discover)
+		goto resched;
+
+	port->upcoming_state = GET_SINK_CAP;
+	ret = tcpm_ams_start(port, GET_SINK_CAPABILITIES);
+	if (ret == -EAGAIN) {
+		port->upcoming_state = INVALID_STATE;
+	} else {
+		port->sink_cap_done = true;
+		goto unlock;
+	}
+resched:
+	mod_enable_frs_delayed_work(port, GET_SINK_CAP_RETRY_MS);
+unlock:
+	mutex_unlock(&port->lock);
+}
+
+static void tcpm_send_discover_work(struct kthread_work *work)
+{
+	struct tcpm_port *port = container_of(work, struct tcpm_port, send_discover_work);
+
+	mutex_lock(&port->lock);
+	/* No need to send DISCOVER_IDENTITY anymore */
+	if (!port->send_discover)
+		goto unlock;
+
+	if (port->data_role == TYPEC_DEVICE && port->negotiated_rev < PD_REV30) {
+		port->send_discover = false;
+		goto unlock;
+	}
+
+	/* Retry if the port is not idle */
+	if ((port->state != SRC_READY && port->state != SNK_READY) || port->vdm_sm_running) {
+		mod_send_discover_delayed_work(port, SEND_DISCOVER_RETRY_MS);
+		goto unlock;
+	}
+
+	tcpm_send_vdm(port, USB_SID_PD, CMD_DISCOVER_IDENT, NULL, 0);
+
+unlock:
+	mutex_unlock(&port->lock);
+}
+
+static int tcpm_dr_set(struct typec_port *p, enum typec_data_role data)
+{
+	struct tcpm_port *port = typec_get_drvdata(p);
+	int ret;
+
+	mutex_lock(&port->swap_lock);
+	mutex_lock(&port->lock);
+
+	if (port->typec_caps.data != TYPEC_PORT_DRD) {
+		ret = -EINVAL;
+		goto port_unlock;
+	}
+	if (port->state != SRC_READY && port->state != SNK_READY) {
+		ret = -EAGAIN;
+		goto port_unlock;
+	}
+
+	if (port->data_role == data) {
+		ret = 0;
+		goto port_unlock;
+	}
+
+	/*
+	 * XXX
+	 * 6.3.9: If an alternate mode is active, a request to swap
+	 * alternate modes shall trigger a port reset.
+	 * Reject data role swap request in this case.
+	 */
+
+	if (!port->pd_capable) {
+		/*
+		 * If the partner is not PD capable, reset the port to
+		 * trigger a role change. This can only work if a preferred
+		 * role is configured, and if it matches the requested role.
+		 */
+		if (port->try_role == TYPEC_NO_PREFERRED_ROLE ||
+		    port->try_role == port->pwr_role) {
+			ret = -EINVAL;
+			goto port_unlock;
+		}
+		port->non_pd_role_swap = true;
+		tcpm_set_state(port, PORT_RESET, 0);
+	} else {
+		port->upcoming_state = DR_SWAP_SEND;
+		ret = tcpm_ams_start(port, DATA_ROLE_SWAP);
+		if (ret == -EAGAIN) {
+			port->upcoming_state = INVALID_STATE;
+			goto port_unlock;
+		}
+	}
+
+	port->swap_status = 0;
+	port->swap_pending = true;
+	reinit_completion(&port->swap_complete);
+	mutex_unlock(&port->lock);
+
+	if (!wait_for_completion_timeout(&port->swap_complete,
+				msecs_to_jiffies(PD_ROLE_SWAP_TIMEOUT)))
+		ret = -ETIMEDOUT;
+	else
+		ret = port->swap_status;
+
+	port->non_pd_role_swap = false;
+	goto swap_unlock;
+
+port_unlock:
+	mutex_unlock(&port->lock);
+swap_unlock:
+	mutex_unlock(&port->swap_lock);
+	return ret;
+}
+
+static int tcpm_pr_set(struct typec_port *p, enum typec_role role)
+{
+	struct tcpm_port *port = typec_get_drvdata(p);
+	int ret;
+
+	mutex_lock(&port->swap_lock);
+	mutex_lock(&port->lock);
+
+	if (port->port_type != TYPEC_PORT_DRP) {
+		ret = -EINVAL;
+		goto port_unlock;
+	}
+	if (port->state != SRC_READY && port->state != SNK_READY) {
+		ret = -EAGAIN;
+		goto port_unlock;
+	}
+
+	if (role == port->pwr_role) {
+		ret = 0;
+		goto port_unlock;
+	}
+
+	port->upcoming_state = PR_SWAP_SEND;
+	ret = tcpm_ams_start(port, POWER_ROLE_SWAP);
+	if (ret == -EAGAIN) {
+		port->upcoming_state = INVALID_STATE;
+		goto port_unlock;
+	}
+
+	port->swap_status = 0;
+	port->swap_pending = true;
+	reinit_completion(&port->swap_complete);
+	mutex_unlock(&port->lock);
+
+	if (!wait_for_completion_timeout(&port->swap_complete,
+				msecs_to_jiffies(PD_ROLE_SWAP_TIMEOUT)))
+		ret = -ETIMEDOUT;
+	else
+		ret = port->swap_status;
+
+	goto swap_unlock;
+
+port_unlock:
+	mutex_unlock(&port->lock);
+swap_unlock:
+	mutex_unlock(&port->swap_lock);
+	return ret;
+}
+
+static int tcpm_vconn_set(struct typec_port *p, enum typec_role role)
+{
+	struct tcpm_port *port = typec_get_drvdata(p);
+	int ret;
+
+	mutex_lock(&port->swap_lock);
+	mutex_lock(&port->lock);
+
+	if (port->state != SRC_READY && port->state != SNK_READY) {
+		ret = -EAGAIN;
+		goto port_unlock;
+	}
+
+	if (role == port->vconn_role) {
+		ret = 0;
+		goto port_unlock;
+	}
+
+	port->upcoming_state = VCONN_SWAP_SEND;
+	ret = tcpm_ams_start(port, VCONN_SWAP);
+	if (ret == -EAGAIN) {
+		port->upcoming_state = INVALID_STATE;
+		goto port_unlock;
+	}
+
+	port->swap_status = 0;
+	port->swap_pending = true;
+	reinit_completion(&port->swap_complete);
+	mutex_unlock(&port->lock);
+
+	if (!wait_for_completion_timeout(&port->swap_complete,
+				msecs_to_jiffies(PD_ROLE_SWAP_TIMEOUT)))
+		ret = -ETIMEDOUT;
+	else
+		ret = port->swap_status;
+
+	goto swap_unlock;
+
+port_unlock:
+	mutex_unlock(&port->lock);
+swap_unlock:
+	mutex_unlock(&port->swap_lock);
+	return ret;
+}
+
+static int tcpm_try_role(struct typec_port *p, int role)
+{
+	struct tcpm_port *port = typec_get_drvdata(p);
+	struct tcpc_dev	*tcpc = port->tcpc;
+	int ret = 0;
+
+	mutex_lock(&port->lock);
+	if (tcpc->try_role)
+		ret = tcpc->try_role(tcpc, role);
+	if (!ret)
+		port->try_role = role;
+	port->try_src_count = 0;
+	port->try_snk_count = 0;
+	mutex_unlock(&port->lock);
+
+	return ret;
+}
+
+static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 req_op_curr)
+{
+	unsigned int target_mw;
+	int ret;
+
+	mutex_lock(&port->swap_lock);
+	mutex_lock(&port->lock);
+
+	if (!port->pps_data.active) {
+		ret = -EOPNOTSUPP;
+		goto port_unlock;
+	}
+
+	if (port->state != SNK_READY) {
+		ret = -EAGAIN;
+		goto port_unlock;
+	}
+
+	if (req_op_curr > port->pps_data.max_curr) {
+		ret = -EINVAL;
+		goto port_unlock;
+	}
+
+	target_mw = (req_op_curr * port->supply_voltage) / 1000;
+	if (target_mw < port->operating_snk_mw) {
+		ret = -EINVAL;
+		goto port_unlock;
+	}
+
+	port->upcoming_state = SNK_NEGOTIATE_PPS_CAPABILITIES;
+	ret = tcpm_ams_start(port, POWER_NEGOTIATION);
+	if (ret == -EAGAIN) {
+		port->upcoming_state = INVALID_STATE;
+		goto port_unlock;
+	}
+
+	/* Round down operating current to align with PPS valid steps */
+	req_op_curr = req_op_curr - (req_op_curr % RDO_PROG_CURR_MA_STEP);
+
+	reinit_completion(&port->pps_complete);
+	port->pps_data.req_op_curr = req_op_curr;
+	port->pps_status = 0;
+	port->pps_pending = true;
+	mutex_unlock(&port->lock);
+
+	if (!wait_for_completion_timeout(&port->pps_complete,
+				msecs_to_jiffies(PD_PPS_CTRL_TIMEOUT)))
+		ret = -ETIMEDOUT;
+	else
+		ret = port->pps_status;
+
+	goto swap_unlock;
+
+port_unlock:
+	mutex_unlock(&port->lock);
+swap_unlock:
+	mutex_unlock(&port->swap_lock);
+
+	return ret;
+}
+
+static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 req_out_volt)
+{
+	unsigned int target_mw;
+	int ret;
+
+	mutex_lock(&port->swap_lock);
+	mutex_lock(&port->lock);
+
+	if (!port->pps_data.active) {
+		ret = -EOPNOTSUPP;
+		goto port_unlock;
+	}
+
+	if (port->state != SNK_READY) {
+		ret = -EAGAIN;
+		goto port_unlock;
+	}
+
+	if (req_out_volt < port->pps_data.min_volt ||
+	    req_out_volt > port->pps_data.max_volt) {
+		ret = -EINVAL;
+		goto port_unlock;
+	}
+
+	target_mw = (port->current_limit * req_out_volt) / 1000;
+	if (target_mw < port->operating_snk_mw) {
+		ret = -EINVAL;
+		goto port_unlock;
+	}
+
+	port->upcoming_state = SNK_NEGOTIATE_PPS_CAPABILITIES;
+	ret = tcpm_ams_start(port, POWER_NEGOTIATION);
+	if (ret == -EAGAIN) {
+		port->upcoming_state = INVALID_STATE;
+		goto port_unlock;
+	}
+
+	/* Round down output voltage to align with PPS valid steps */
+	req_out_volt = req_out_volt - (req_out_volt % RDO_PROG_VOLT_MV_STEP);
+
+	reinit_completion(&port->pps_complete);
+	port->pps_data.req_out_volt = req_out_volt;
+	port->pps_status = 0;
+	port->pps_pending = true;
+	mutex_unlock(&port->lock);
+
+	if (!wait_for_completion_timeout(&port->pps_complete,
+				msecs_to_jiffies(PD_PPS_CTRL_TIMEOUT)))
+		ret = -ETIMEDOUT;
+	else
+		ret = port->pps_status;
+
+	goto swap_unlock;
+
+port_unlock:
+	mutex_unlock(&port->lock);
+swap_unlock:
+	mutex_unlock(&port->swap_lock);
+
+	return ret;
+}
+
+static int tcpm_pps_activate(struct tcpm_port *port, bool activate)
+{
+	int ret = 0;
+
+	mutex_lock(&port->swap_lock);
+	mutex_lock(&port->lock);
+
+	if (!port->pps_data.supported) {
+		ret = -EOPNOTSUPP;
+		goto port_unlock;
+	}
+
+	/* Trying to deactivate PPS when already deactivated so just bail */
+	if (!port->pps_data.active && !activate)
+		goto port_unlock;
+
+	if (port->state != SNK_READY) {
+		ret = -EAGAIN;
+		goto port_unlock;
+	}
+
+	if (activate)
+		port->upcoming_state = SNK_NEGOTIATE_PPS_CAPABILITIES;
+	else
+		port->upcoming_state = SNK_NEGOTIATE_CAPABILITIES;
+	ret = tcpm_ams_start(port, POWER_NEGOTIATION);
+	if (ret == -EAGAIN) {
+		port->upcoming_state = INVALID_STATE;
+		goto port_unlock;
+	}
+
+	reinit_completion(&port->pps_complete);
+	port->pps_status = 0;
+	port->pps_pending = true;
+
+	/* Trigger PPS request or move back to standard PDO contract */
+	if (activate) {
+		port->pps_data.req_out_volt = port->supply_voltage;
+		port->pps_data.req_op_curr = port->current_limit;
+	}
+	mutex_unlock(&port->lock);
+
+	if (!wait_for_completion_timeout(&port->pps_complete,
+				msecs_to_jiffies(PD_PPS_CTRL_TIMEOUT)))
+		ret = -ETIMEDOUT;
+	else
+		ret = port->pps_status;
+
+	goto swap_unlock;
+
+port_unlock:
+	mutex_unlock(&port->lock);
+swap_unlock:
+	mutex_unlock(&port->swap_lock);
+
+	return ret;
+}
+
+static void tcpm_init(struct tcpm_port *port)
+{
+	enum typec_cc_status cc1, cc2;
+
+	port->tcpc->init(port->tcpc);
+
+	tcpm_reset_port(port);
+
+	/*
+	 * XXX
+	 * Should possibly wait for VBUS to settle if it was enabled locally
+	 * since tcpm_reset_port() will disable VBUS.
+	 */
+	port->vbus_present = port->tcpc->get_vbus(port->tcpc);
+	if (port->vbus_present)
+		port->vbus_never_low = true;
+
+	/*
+	 * 1. When vbus_present is true, voltage on VBUS is already at VSAFE5V.
+	 * So implicitly vbus_vsafe0v = false.
+	 *
+	 * 2. When vbus_present is false and TCPC does NOT support querying
+	 * vsafe0v status, then, it's best to assume vbus is at VSAFE0V i.e.
+	 * vbus_vsafe0v is true.
+	 *
+	 * 3. When vbus_present is false and TCPC does support querying vsafe0v,
+	 * then, query tcpc for vsafe0v status.
+	 */
+	if (port->vbus_present)
+		port->vbus_vsafe0v = false;
+	else if (!port->tcpc->is_vbus_vsafe0v)
+		port->vbus_vsafe0v = true;
+	else
+		port->vbus_vsafe0v = port->tcpc->is_vbus_vsafe0v(port->tcpc);
+
+	tcpm_set_state(port, tcpm_default_state(port), 0);
+
+	if (port->tcpc->get_cc(port->tcpc, &cc1, &cc2) == 0)
+		_tcpm_cc_change(port, cc1, cc2);
+
+	/*
+	 * Some adapters need a clean slate at startup, and won't recover
+	 * otherwise. So do not try to be fancy and force a clean disconnect.
+	 */
+	tcpm_set_state(port, PORT_RESET, 0);
+}
+
+static int tcpm_port_type_set(struct typec_port *p, enum typec_port_type type)
+{
+	struct tcpm_port *port = typec_get_drvdata(p);
+
+	mutex_lock(&port->lock);
+	if (type == port->port_type)
+		goto port_unlock;
+
+	port->port_type = type;
+
+	if (!port->connected) {
+		tcpm_set_state(port, PORT_RESET, 0);
+	} else if (type == TYPEC_PORT_SNK) {
+		if (!(port->pwr_role == TYPEC_SINK &&
+		      port->data_role == TYPEC_DEVICE))
+			tcpm_set_state(port, PORT_RESET, 0);
+	} else if (type == TYPEC_PORT_SRC) {
+		if (!(port->pwr_role == TYPEC_SOURCE &&
+		      port->data_role == TYPEC_HOST))
+			tcpm_set_state(port, PORT_RESET, 0);
+	}
+
+port_unlock:
+	mutex_unlock(&port->lock);
+	return 0;
+}
+
+static const struct typec_operations tcpm_ops = {
+	.try_role = tcpm_try_role,
+	.dr_set = tcpm_dr_set,
+	.pr_set = tcpm_pr_set,
+	.vconn_set = tcpm_vconn_set,
+	.port_type_set = tcpm_port_type_set
+};
+
+void tcpm_tcpc_reset(struct tcpm_port *port)
+{
+	mutex_lock(&port->lock);
+	/* XXX: Maintain PD connection if possible? */
+	tcpm_init(port);
+	mutex_unlock(&port->lock);
+}
+EXPORT_SYMBOL_GPL(tcpm_tcpc_reset);
+
+static void tcpm_port_unregister_pd(struct tcpm_port *port)
+{
+	usb_power_delivery_unregister_capabilities(port->port_sink_caps);
+	port->port_sink_caps = NULL;
+	usb_power_delivery_unregister_capabilities(port->port_source_caps);
+	port->port_source_caps = NULL;
+	usb_power_delivery_unregister(port->pd);
+	port->pd = NULL;
+}
+
+static int tcpm_port_register_pd(struct tcpm_port *port)
+{
+	struct usb_power_delivery_desc desc = { port->typec_caps.pd_revision };
+	struct usb_power_delivery_capabilities_desc caps = { };
+	struct usb_power_delivery_capabilities *cap;
+	int ret;
+
+	if (!port->nr_src_pdo && !port->nr_snk_pdo)
+		return 0;
+
+	port->pd = usb_power_delivery_register(port->dev, &desc);
+	if (IS_ERR(port->pd)) {
+		ret = PTR_ERR(port->pd);
+		goto err_unregister;
+	}
+
+	if (port->nr_src_pdo) {
+		memcpy_and_pad(caps.pdo, sizeof(caps.pdo), port->src_pdo,
+			       port->nr_src_pdo * sizeof(u32), 0);
+		caps.role = TYPEC_SOURCE;
+
+		cap = usb_power_delivery_register_capabilities(port->pd, &caps);
+		if (IS_ERR(cap)) {
+			ret = PTR_ERR(cap);
+			goto err_unregister;
+		}
+
+		port->port_source_caps = cap;
+	}
+
+	if (port->nr_snk_pdo) {
+		memcpy_and_pad(caps.pdo, sizeof(caps.pdo), port->snk_pdo,
+			       port->nr_snk_pdo * sizeof(u32), 0);
+		caps.role = TYPEC_SINK;
+
+		cap = usb_power_delivery_register_capabilities(port->pd, &caps);
+		if (IS_ERR(cap)) {
+			ret = PTR_ERR(cap);
+			goto err_unregister;
+		}
+
+		port->port_sink_caps = cap;
+	}
+
+	return 0;
+
+err_unregister:
+	tcpm_port_unregister_pd(port);
+
+	return ret;
+}
+
+static int tcpm_fw_get_caps(struct tcpm_port *port,
+			    struct fwnode_handle *fwnode)
+{
+	const char *opmode_str;
+	int ret;
+	u32 mw, frs_current;
+
+	if (!fwnode)
+		return -EINVAL;
+
+	/*
+	 * This fwnode has a "compatible" property, but is never populated as a
+	 * struct device. Instead we simply parse it to read the properties.
+	 * This it breaks fw_devlink=on. To maintain backward compatibility
+	 * with existing DT files, we work around this by deleting any
+	 * fwnode_links to/from this fwnode.
+	 */
+	fw_devlink_purge_absent_suppliers(fwnode);
+
+	ret = typec_get_fw_cap(&port->typec_caps, fwnode);
+	if (ret < 0)
+		return ret;
+
+	port->port_type = port->typec_caps.type;
+	port->pd_supported = !fwnode_property_read_bool(fwnode, "pd-disable");
+
+	port->slow_charger_loop = fwnode_property_read_bool(fwnode, "slow-charger-loop");
+	if (port->port_type == TYPEC_PORT_SNK)
+		goto sink;
+
+	/* Get Source PDOs for the PD port or Source Rp value for the non-PD port */
+	if (port->pd_supported) {
+		ret = fwnode_property_count_u32(fwnode, "source-pdos");
+		if (ret == 0)
+			return -EINVAL;
+		else if (ret < 0)
+			return ret;
+
+		port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS);
+		ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
+						     port->src_pdo, port->nr_src_pdo);
+		if (ret)
+			return ret;
+		ret = tcpm_validate_caps(port, port->src_pdo, port->nr_src_pdo);
+		if (ret)
+			return ret;
+	} else {
+		ret = fwnode_property_read_string(fwnode, "typec-power-opmode", &opmode_str);
+		if (ret)
+			return ret;
+		ret = typec_find_pwr_opmode(opmode_str);
+		if (ret < 0)
+			return ret;
+		port->src_rp = tcpm_pwr_opmode_to_rp(ret);
+	}
+
+	if (port->port_type == TYPEC_PORT_SRC)
+		return 0;
+
+sink:
+	port->self_powered = fwnode_property_read_bool(fwnode, "self-powered");
+
+	if (!port->pd_supported)
+		return 0;
+
+	/* Get sink pdos */
+	ret = fwnode_property_count_u32(fwnode, "sink-pdos");
+	if (ret <= 0)
+		return -EINVAL;
+
+	port->nr_snk_pdo = min(ret, PDO_MAX_OBJECTS);
+	ret = fwnode_property_read_u32_array(fwnode, "sink-pdos",
+					     port->snk_pdo, port->nr_snk_pdo);
+	if ((ret < 0) || tcpm_validate_caps(port, port->snk_pdo,
+					    port->nr_snk_pdo))
+		return -EINVAL;
+
+	if (fwnode_property_read_u32(fwnode, "op-sink-microwatt", &mw) < 0)
+		return -EINVAL;
+	port->operating_snk_mw = mw / 1000;
+
+	/* FRS can only be supported by DRP ports */
+	if (port->port_type == TYPEC_PORT_DRP) {
+		ret = fwnode_property_read_u32(fwnode, "new-source-frs-typec-current",
+					       &frs_current);
+		if (ret >= 0 && frs_current <= FRS_5V_3A)
+			port->new_source_frs_current = frs_current;
+	}
+
+	/* sink-vdos is optional */
+	ret = fwnode_property_count_u32(fwnode, "sink-vdos");
+	if (ret < 0)
+		ret = 0;
+
+	port->nr_snk_vdo = min(ret, VDO_MAX_OBJECTS);
+	if (port->nr_snk_vdo) {
+		ret = fwnode_property_read_u32_array(fwnode, "sink-vdos",
+						     port->snk_vdo,
+						     port->nr_snk_vdo);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* If sink-vdos is found, sink-vdos-v1 is expected for backward compatibility. */
+	if (port->nr_snk_vdo) {
+		ret = fwnode_property_count_u32(fwnode, "sink-vdos-v1");
+		if (ret < 0)
+			return ret;
+		else if (ret == 0)
+			return -ENODATA;
+
+		port->nr_snk_vdo_v1 = min(ret, VDO_MAX_OBJECTS);
+		ret = fwnode_property_read_u32_array(fwnode, "sink-vdos-v1",
+						     port->snk_vdo_v1,
+						     port->nr_snk_vdo_v1);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+/* Power Supply access to expose source power information */
+enum tcpm_psy_online_states {
+	TCPM_PSY_OFFLINE = 0,
+	TCPM_PSY_FIXED_ONLINE,
+	TCPM_PSY_PROG_ONLINE,
+};
+
+static enum power_supply_property tcpm_psy_props[] = {
+	POWER_SUPPLY_PROP_USB_TYPE,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static int tcpm_psy_get_online(struct tcpm_port *port,
+			       union power_supply_propval *val)
+{
+	if (port->vbus_charge) {
+		if (port->pps_data.active)
+			val->intval = TCPM_PSY_PROG_ONLINE;
+		else
+			val->intval = TCPM_PSY_FIXED_ONLINE;
+	} else {
+		val->intval = TCPM_PSY_OFFLINE;
+	}
+
+	return 0;
+}
+
+static int tcpm_psy_get_voltage_min(struct tcpm_port *port,
+				    union power_supply_propval *val)
+{
+	if (port->pps_data.active)
+		val->intval = port->pps_data.min_volt * 1000;
+	else
+		val->intval = port->supply_voltage * 1000;
+
+	return 0;
+}
+
+static int tcpm_psy_get_voltage_max(struct tcpm_port *port,
+				    union power_supply_propval *val)
+{
+	if (port->pps_data.active)
+		val->intval = port->pps_data.max_volt * 1000;
+	else
+		val->intval = port->supply_voltage * 1000;
+
+	return 0;
+}
+
+static int tcpm_psy_get_voltage_now(struct tcpm_port *port,
+				    union power_supply_propval *val)
+{
+	val->intval = port->supply_voltage * 1000;
+
+	return 0;
+}
+
+static int tcpm_psy_get_current_max(struct tcpm_port *port,
+				    union power_supply_propval *val)
+{
+	if (port->pps_data.active)
+		val->intval = port->pps_data.max_curr * 1000;
+	else
+		val->intval = port->current_limit * 1000;
+
+	return 0;
+}
+
+static int tcpm_psy_get_current_now(struct tcpm_port *port,
+				    union power_supply_propval *val)
+{
+	val->intval = port->current_limit * 1000;
+
+	return 0;
+}
+
+static int tcpm_psy_get_prop(struct power_supply *psy,
+			     enum power_supply_property psp,
+			     union power_supply_propval *val)
+{
+	struct tcpm_port *port = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		val->intval = port->usb_type;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = tcpm_psy_get_online(port, val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		ret = tcpm_psy_get_voltage_min(port, val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		ret = tcpm_psy_get_voltage_max(port, val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = tcpm_psy_get_voltage_now(port, val);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		ret = tcpm_psy_get_current_max(port, val);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = tcpm_psy_get_current_now(port, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static int tcpm_psy_set_online(struct tcpm_port *port,
+			       const union power_supply_propval *val)
+{
+	int ret;
+
+	switch (val->intval) {
+	case TCPM_PSY_FIXED_ONLINE:
+		ret = tcpm_pps_activate(port, false);
+		break;
+	case TCPM_PSY_PROG_ONLINE:
+		ret = tcpm_pps_activate(port, true);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static int tcpm_psy_set_prop(struct power_supply *psy,
+			     enum power_supply_property psp,
+			     const union power_supply_propval *val)
+{
+	struct tcpm_port *port = power_supply_get_drvdata(psy);
+	int ret;
+
+	/*
+	 * All the properties below are related to USB PD. The check needs to be
+	 * property specific when a non-pd related property is added.
+	 */
+	if (!port->pd_supported)
+		return -EOPNOTSUPP;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = tcpm_psy_set_online(port, val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (val->intval < port->pps_data.min_volt * 1000 ||
+		    val->intval > port->pps_data.max_volt * 1000)
+			ret = -EINVAL;
+		else
+			ret = tcpm_pps_set_out_volt(port, val->intval / 1000);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		if (val->intval > port->pps_data.max_curr * 1000)
+			ret = -EINVAL;
+		else
+			ret = tcpm_pps_set_op_curr(port, val->intval / 1000);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	power_supply_changed(port->psy);
+	return ret;
+}
+
+static int tcpm_psy_prop_writeable(struct power_supply *psy,
+				   enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static enum power_supply_usb_type tcpm_psy_usb_types[] = {
+	POWER_SUPPLY_USB_TYPE_C,
+	POWER_SUPPLY_USB_TYPE_PD,
+	POWER_SUPPLY_USB_TYPE_PD_PPS,
+};
+
+static const char *tcpm_psy_name_prefix = "tcpm-source-psy-";
+
+static int devm_tcpm_psy_register(struct tcpm_port *port)
+{
+	struct power_supply_config psy_cfg = {};
+	const char *port_dev_name = dev_name(port->dev);
+	size_t psy_name_len = strlen(tcpm_psy_name_prefix) +
+				     strlen(port_dev_name) + 1;
+	char *psy_name;
+
+	psy_cfg.drv_data = port;
+	psy_cfg.fwnode = dev_fwnode(port->dev);
+	psy_name = devm_kzalloc(port->dev, psy_name_len, GFP_KERNEL);
+	if (!psy_name)
+		return -ENOMEM;
+
+	snprintf(psy_name, psy_name_len, "%s%s", tcpm_psy_name_prefix,
+		 port_dev_name);
+	port->psy_desc.name = psy_name;
+	port->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+	port->psy_desc.usb_types = tcpm_psy_usb_types;
+	port->psy_desc.num_usb_types = ARRAY_SIZE(tcpm_psy_usb_types);
+	port->psy_desc.properties = tcpm_psy_props;
+	port->psy_desc.num_properties = ARRAY_SIZE(tcpm_psy_props);
+	port->psy_desc.get_property = tcpm_psy_get_prop;
+	port->psy_desc.set_property = tcpm_psy_set_prop;
+	port->psy_desc.property_is_writeable = tcpm_psy_prop_writeable;
+
+	port->usb_type = POWER_SUPPLY_USB_TYPE_C;
+
+	port->psy = devm_power_supply_register(port->dev, &port->psy_desc,
+					       &psy_cfg);
+
+	return PTR_ERR_OR_ZERO(port->psy);
+}
+
+static enum hrtimer_restart state_machine_timer_handler(struct hrtimer *timer)
+{
+	struct tcpm_port *port = container_of(timer, struct tcpm_port, state_machine_timer);
+
+	if (port->registered)
+		kthread_queue_work(port->wq, &port->state_machine);
+	return HRTIMER_NORESTART;
+}
+
+static enum hrtimer_restart vdm_state_machine_timer_handler(struct hrtimer *timer)
+{
+	struct tcpm_port *port = container_of(timer, struct tcpm_port, vdm_state_machine_timer);
+
+	if (port->registered)
+		kthread_queue_work(port->wq, &port->vdm_state_machine);
+	return HRTIMER_NORESTART;
+}
+
+static enum hrtimer_restart enable_frs_timer_handler(struct hrtimer *timer)
+{
+	struct tcpm_port *port = container_of(timer, struct tcpm_port, enable_frs_timer);
+
+	if (port->registered)
+		kthread_queue_work(port->wq, &port->enable_frs);
+	return HRTIMER_NORESTART;
+}
+
+static enum hrtimer_restart send_discover_timer_handler(struct hrtimer *timer)
+{
+	struct tcpm_port *port = container_of(timer, struct tcpm_port, send_discover_timer);
+
+	if (port->registered)
+		kthread_queue_work(port->wq, &port->send_discover_work);
+	return HRTIMER_NORESTART;
+}
+
+struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc)
+{
+	struct tcpm_port *port;
+	int err;
+
+	if (!dev || !tcpc ||
+	    !tcpc->get_vbus || !tcpc->set_cc || !tcpc->get_cc ||
+	    !tcpc->set_polarity || !tcpc->set_vconn || !tcpc->set_vbus ||
+	    !tcpc->set_pd_rx || !tcpc->set_roles || !tcpc->pd_transmit)
+		return ERR_PTR(-EINVAL);
+
+	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return ERR_PTR(-ENOMEM);
+
+	port->dev = dev;
+	port->tcpc = tcpc;
+
+	mutex_init(&port->lock);
+	mutex_init(&port->swap_lock);
+
+	port->wq = kthread_create_worker(0, dev_name(dev));
+	if (IS_ERR(port->wq))
+		return ERR_CAST(port->wq);
+	sched_set_fifo(port->wq->task);
+
+	kthread_init_work(&port->state_machine, tcpm_state_machine_work);
+	kthread_init_work(&port->vdm_state_machine, vdm_state_machine_work);
+	kthread_init_work(&port->event_work, tcpm_pd_event_handler);
+	kthread_init_work(&port->enable_frs, tcpm_enable_frs_work);
+	kthread_init_work(&port->send_discover_work, tcpm_send_discover_work);
+	hrtimer_init(&port->state_machine_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	port->state_machine_timer.function = state_machine_timer_handler;
+	hrtimer_init(&port->vdm_state_machine_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	port->vdm_state_machine_timer.function = vdm_state_machine_timer_handler;
+	hrtimer_init(&port->enable_frs_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	port->enable_frs_timer.function = enable_frs_timer_handler;
+	hrtimer_init(&port->send_discover_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	port->send_discover_timer.function = send_discover_timer_handler;
+
+	spin_lock_init(&port->pd_event_lock);
+
+	init_completion(&port->tx_complete);
+	init_completion(&port->swap_complete);
+	init_completion(&port->pps_complete);
+	tcpm_debugfs_init(port);
+
+	err = tcpm_fw_get_caps(port, tcpc->fwnode);
+	if (err < 0)
+		goto out_destroy_wq;
+
+	port->try_role = port->typec_caps.prefer_role;
+
+	port->typec_caps.fwnode = tcpc->fwnode;
+	port->typec_caps.revision = 0x0120;	/* Type-C spec release 1.2 */
+	port->typec_caps.pd_revision = 0x0300;	/* USB-PD spec release 3.0 */
+	port->typec_caps.svdm_version = SVDM_VER_2_0;
+	port->typec_caps.driver_data = port;
+	port->typec_caps.ops = &tcpm_ops;
+	port->typec_caps.orientation_aware = 1;
+
+	port->partner_desc.identity = &port->partner_ident;
+	port->port_type = port->typec_caps.type;
+
+	port->role_sw = usb_role_switch_get(port->dev);
+	if (IS_ERR(port->role_sw)) {
+		err = PTR_ERR(port->role_sw);
+		goto out_destroy_wq;
+	}
+
+	err = devm_tcpm_psy_register(port);
+	if (err)
+		goto out_role_sw_put;
+	power_supply_changed(port->psy);
+
+	err = tcpm_port_register_pd(port);
+	if (err)
+		goto out_role_sw_put;
+
+	port->typec_caps.pd = port->pd;
+
+	port->typec_port = typec_register_port(port->dev, &port->typec_caps);
+	if (IS_ERR(port->typec_port)) {
+		err = PTR_ERR(port->typec_port);
+		goto out_unregister_pd;
+	}
+
+	typec_port_register_altmodes(port->typec_port,
+				     &tcpm_altmode_ops, port,
+				     port->port_altmode, ALTMODE_DISCOVERY_MAX);
+	port->registered = true;
+
+	mutex_lock(&port->lock);
+	tcpm_init(port);
+	mutex_unlock(&port->lock);
+
+	tcpm_log(port, "%s: registered", dev_name(dev));
+	return port;
+
+out_unregister_pd:
+	tcpm_port_unregister_pd(port);
+out_role_sw_put:
+	usb_role_switch_put(port->role_sw);
+out_destroy_wq:
+	tcpm_debugfs_exit(port);
+	kthread_destroy_worker(port->wq);
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(tcpm_register_port);
+
+void tcpm_unregister_port(struct tcpm_port *port)
+{
+	int i;
+
+	port->registered = false;
+	kthread_destroy_worker(port->wq);
+
+	hrtimer_cancel(&port->send_discover_timer);
+	hrtimer_cancel(&port->enable_frs_timer);
+	hrtimer_cancel(&port->vdm_state_machine_timer);
+	hrtimer_cancel(&port->state_machine_timer);
+
+	tcpm_reset_port(port);
+
+	tcpm_port_unregister_pd(port);
+
+	for (i = 0; i < ARRAY_SIZE(port->port_altmode); i++)
+		typec_unregister_altmode(port->port_altmode[i]);
+	typec_unregister_port(port->typec_port);
+	usb_role_switch_put(port->role_sw);
+	tcpm_debugfs_exit(port);
+}
+EXPORT_SYMBOL_GPL(tcpm_unregister_port);
+
+MODULE_AUTHOR("Guenter Roeck <groeck@chromium.org>");
+MODULE_DESCRIPTION("USB Type-C Port Manager");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/typec/tcpm/wcove.c b/drivers/usb/typec/tcpm/wcove.c
new file mode 100644
index 000000000..20917d85d
--- /dev/null
+++ b/drivers/usb/typec/tcpm/wcove.c
@@ -0,0 +1,704 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * typec_wcove.c - WhiskeyCove PMIC USB Type-C PHY driver
+ *
+ * Copyright (C) 2017 Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/usb/tcpm.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/intel_soc_pmic.h>
+
+/* Register offsets */
+#define WCOVE_CHGRIRQ0		0x4e09
+
+#define USBC_CONTROL1		0x7001
+#define USBC_CONTROL2		0x7002
+#define USBC_CONTROL3		0x7003
+#define USBC_CC1_CTRL		0x7004
+#define USBC_CC2_CTRL		0x7005
+#define USBC_STATUS1		0x7007
+#define USBC_STATUS2		0x7008
+#define USBC_STATUS3		0x7009
+#define USBC_CC1		0x700a
+#define USBC_CC2		0x700b
+#define USBC_CC1_STATUS		0x700c
+#define USBC_CC2_STATUS		0x700d
+#define USBC_IRQ1		0x7015
+#define USBC_IRQ2		0x7016
+#define USBC_IRQMASK1		0x7017
+#define USBC_IRQMASK2		0x7018
+#define USBC_PDCFG2		0x701a
+#define USBC_PDCFG3		0x701b
+#define USBC_PDSTATUS		0x701c
+#define USBC_RXSTATUS		0x701d
+#define USBC_RXINFO		0x701e
+#define USBC_TXCMD		0x701f
+#define USBC_TXINFO		0x7020
+#define USBC_RX_DATA		0x7028
+#define USBC_TX_DATA		0x7047
+
+/* Register bits */
+
+#define USBC_CONTROL1_MODE_MASK		0x3
+#define   USBC_CONTROL1_MODE_SNK	0
+#define   USBC_CONTROL1_MODE_SNKACC	1
+#define   USBC_CONTROL1_MODE_SRC	2
+#define   USBC_CONTROL1_MODE_SRCACC	3
+#define   USBC_CONTROL1_MODE_DRP	4
+#define   USBC_CONTROL1_MODE_DRPACC	5
+#define   USBC_CONTROL1_MODE_TEST	7
+#define USBC_CONTROL1_CURSRC_MASK	0xc
+#define   USBC_CONTROL1_CURSRC_UA_0	(0 << 3)
+#define   USBC_CONTROL1_CURSRC_UA_80	(1 << 3)
+#define   USBC_CONTROL1_CURSRC_UA_180	(2 << 3)
+#define   USBC_CONTROL1_CURSRC_UA_330	(3 << 3)
+#define USBC_CONTROL1_DRPTOGGLE_RANDOM	0xe0
+
+#define USBC_CONTROL2_UNATT_SNK		BIT(0)
+#define USBC_CONTROL2_UNATT_SRC		BIT(1)
+#define USBC_CONTROL2_DIS_ST		BIT(2)
+
+#define USBC_CONTROL3_DET_DIS		BIT(0)
+#define USBC_CONTROL3_PD_DIS		BIT(1)
+#define USBC_CONTROL3_RESETPHY		BIT(2)
+
+#define USBC_CC_CTRL_PU_EN		BIT(0)
+#define USBC_CC_CTRL_VCONN_EN		BIT(1)
+#define USBC_CC_CTRL_TX_EN		BIT(2)
+#define USBC_CC_CTRL_PD_EN		BIT(3)
+#define USBC_CC_CTRL_CDET_EN		BIT(4)
+#define USBC_CC_CTRL_RDET_EN		BIT(5)
+#define USBC_CC_CTRL_ADC_EN		BIT(6)
+#define USBC_CC_CTRL_VBUSOK		BIT(7)
+
+#define USBC_STATUS1_DET_ONGOING	BIT(6)
+#define USBC_STATUS1_RSLT(r)		((r) & 0xf)
+#define USBC_RSLT_NOTHING		0
+#define USBC_RSLT_SRC_DEFAULT		1
+#define USBC_RSLT_SRC_1_5A		2
+#define USBC_RSLT_SRC_3_0A		3
+#define USBC_RSLT_SNK			4
+#define USBC_RSLT_DEBUG_ACC		5
+#define USBC_RSLT_AUDIO_ACC		6
+#define USBC_RSLT_UNDEF			15
+#define USBC_STATUS1_ORIENT(r)		(((r) >> 4) & 0x3)
+#define USBC_ORIENT_NORMAL		1
+#define USBC_ORIENT_REVERSE		2
+
+#define USBC_STATUS2_VBUS_REQ		BIT(5)
+
+#define UCSC_CC_STATUS_SNK_RP		BIT(0)
+#define UCSC_CC_STATUS_PWRDEFSNK	BIT(1)
+#define UCSC_CC_STATUS_PWR_1P5A_SNK	BIT(2)
+#define UCSC_CC_STATUS_PWR_3A_SNK	BIT(3)
+#define UCSC_CC_STATUS_SRC_RP		BIT(4)
+#define UCSC_CC_STATUS_RX(r)		(((r) >> 5) & 0x3)
+#define   USBC_CC_STATUS_RD		1
+#define   USBC_CC_STATUS_RA		2
+
+#define USBC_IRQ1_ADCDONE1		BIT(2)
+#define USBC_IRQ1_OVERTEMP		BIT(1)
+#define USBC_IRQ1_SHORT			BIT(0)
+
+#define USBC_IRQ2_CC_CHANGE		BIT(7)
+#define USBC_IRQ2_RX_PD			BIT(6)
+#define USBC_IRQ2_RX_HR			BIT(5)
+#define USBC_IRQ2_RX_CR			BIT(4)
+#define USBC_IRQ2_TX_SUCCESS		BIT(3)
+#define USBC_IRQ2_TX_FAIL		BIT(2)
+
+#define USBC_IRQMASK1_ALL	(USBC_IRQ1_ADCDONE1 | USBC_IRQ1_OVERTEMP | \
+				 USBC_IRQ1_SHORT)
+
+#define USBC_IRQMASK2_ALL	(USBC_IRQ2_CC_CHANGE | USBC_IRQ2_RX_PD | \
+				 USBC_IRQ2_RX_HR | USBC_IRQ2_RX_CR | \
+				 USBC_IRQ2_TX_SUCCESS | USBC_IRQ2_TX_FAIL)
+
+#define USBC_PDCFG2_SOP			BIT(0)
+#define USBC_PDCFG2_SOP_P		BIT(1)
+#define USBC_PDCFG2_SOP_PP		BIT(2)
+#define USBC_PDCFG2_SOP_P_DEBUG		BIT(3)
+#define USBC_PDCFG2_SOP_PP_DEBUG	BIT(4)
+
+#define USBC_PDCFG3_DATAROLE_SHIFT	1
+#define USBC_PDCFG3_SOP_SHIFT		2
+
+#define USBC_RXSTATUS_RXCLEAR		BIT(0)
+#define USBC_RXSTATUS_RXDATA		BIT(7)
+
+#define USBC_RXINFO_RXBYTES(i)		(((i) >> 3) & 0x1f)
+
+#define USBC_TXCMD_BUF_RDY		BIT(0)
+#define USBC_TXCMD_START		BIT(1)
+#define USBC_TXCMD_NOP			(0 << 5)
+#define USBC_TXCMD_MSG			(1 << 5)
+#define USBC_TXCMD_CR			(2 << 5)
+#define USBC_TXCMD_HR			(3 << 5)
+#define USBC_TXCMD_BIST			(4 << 5)
+
+#define USBC_TXINFO_RETRIES(d)		(d << 3)
+
+struct wcove_typec {
+	struct mutex lock; /* device lock */
+	struct device *dev;
+	struct regmap *regmap;
+	guid_t guid;
+
+	bool vbus;
+
+	struct tcpc_dev tcpc;
+	struct tcpm_port *tcpm;
+};
+
+#define tcpc_to_wcove(_tcpc_) container_of(_tcpc_, struct wcove_typec, tcpc)
+
+enum wcove_typec_func {
+	WCOVE_FUNC_DRIVE_VBUS = 1,
+	WCOVE_FUNC_ORIENTATION,
+	WCOVE_FUNC_ROLE,
+	WCOVE_FUNC_DRIVE_VCONN,
+};
+
+enum wcove_typec_orientation {
+	WCOVE_ORIENTATION_NORMAL,
+	WCOVE_ORIENTATION_REVERSE,
+};
+
+enum wcove_typec_role {
+	WCOVE_ROLE_HOST,
+	WCOVE_ROLE_DEVICE,
+};
+
+#define WCOVE_DSM_UUID		"482383f0-2876-4e49-8685-db66211af037"
+
+static int wcove_typec_func(struct wcove_typec *wcove,
+			    enum wcove_typec_func func, int param)
+{
+	union acpi_object *obj;
+	union acpi_object tmp;
+	union acpi_object argv4 = ACPI_INIT_DSM_ARGV4(1, &tmp);
+
+	tmp.type = ACPI_TYPE_INTEGER;
+	tmp.integer.value = param;
+
+	obj = acpi_evaluate_dsm(ACPI_HANDLE(wcove->dev), &wcove->guid, 1, func,
+				&argv4);
+	if (!obj) {
+		dev_err(wcove->dev, "%s: failed to evaluate _DSM\n", __func__);
+		return -EIO;
+	}
+
+	ACPI_FREE(obj);
+	return 0;
+}
+
+static int wcove_init(struct tcpc_dev *tcpc)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+	int ret;
+
+	ret = regmap_write(wcove->regmap, USBC_CONTROL1, 0);
+	if (ret)
+		return ret;
+
+	/* Unmask everything */
+	ret = regmap_write(wcove->regmap, USBC_IRQMASK1, 0);
+	if (ret)
+		return ret;
+
+	return regmap_write(wcove->regmap, USBC_IRQMASK2, 0);
+}
+
+static int wcove_get_vbus(struct tcpc_dev *tcpc)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+	unsigned int cc1ctrl;
+	int ret;
+
+	ret = regmap_read(wcove->regmap, USBC_CC1_CTRL, &cc1ctrl);
+	if (ret)
+		return ret;
+
+	wcove->vbus = !!(cc1ctrl & USBC_CC_CTRL_VBUSOK);
+
+	return wcove->vbus;
+}
+
+static int wcove_set_vbus(struct tcpc_dev *tcpc, bool on, bool sink)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+
+	return wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VBUS, on);
+}
+
+static int wcove_set_vconn(struct tcpc_dev *tcpc, bool on)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+
+	return wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, on);
+}
+
+static enum typec_cc_status wcove_to_typec_cc(unsigned int cc)
+{
+	if (cc & UCSC_CC_STATUS_SNK_RP) {
+		if (cc & UCSC_CC_STATUS_PWRDEFSNK)
+			return TYPEC_CC_RP_DEF;
+		else if (cc & UCSC_CC_STATUS_PWR_1P5A_SNK)
+			return TYPEC_CC_RP_1_5;
+		else if (cc & UCSC_CC_STATUS_PWR_3A_SNK)
+			return TYPEC_CC_RP_3_0;
+	} else {
+		switch (UCSC_CC_STATUS_RX(cc)) {
+		case USBC_CC_STATUS_RD:
+			return TYPEC_CC_RD;
+		case USBC_CC_STATUS_RA:
+			return TYPEC_CC_RA;
+		default:
+			break;
+		}
+	}
+	return TYPEC_CC_OPEN;
+}
+
+static int wcove_get_cc(struct tcpc_dev *tcpc, enum typec_cc_status *cc1,
+			enum typec_cc_status *cc2)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+	unsigned int cc1_status;
+	unsigned int cc2_status;
+	int ret;
+
+	ret = regmap_read(wcove->regmap, USBC_CC1_STATUS, &cc1_status);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(wcove->regmap, USBC_CC2_STATUS, &cc2_status);
+	if (ret)
+		return ret;
+
+	*cc1 = wcove_to_typec_cc(cc1_status);
+	*cc2 = wcove_to_typec_cc(cc2_status);
+
+	return 0;
+}
+
+static int wcove_set_cc(struct tcpc_dev *tcpc, enum typec_cc_status cc)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+	unsigned int ctrl;
+
+	switch (cc) {
+	case TYPEC_CC_RD:
+		ctrl = USBC_CONTROL1_MODE_SNK;
+		break;
+	case TYPEC_CC_RP_DEF:
+		ctrl = USBC_CONTROL1_CURSRC_UA_80 | USBC_CONTROL1_MODE_SRC;
+		break;
+	case TYPEC_CC_RP_1_5:
+		ctrl = USBC_CONTROL1_CURSRC_UA_180 | USBC_CONTROL1_MODE_SRC;
+		break;
+	case TYPEC_CC_RP_3_0:
+		ctrl = USBC_CONTROL1_CURSRC_UA_330 | USBC_CONTROL1_MODE_SRC;
+		break;
+	case TYPEC_CC_OPEN:
+		ctrl = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_write(wcove->regmap, USBC_CONTROL1, ctrl);
+}
+
+static int wcove_set_polarity(struct tcpc_dev *tcpc, enum typec_cc_polarity pol)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+
+	return wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION, pol);
+}
+
+static int wcove_set_current_limit(struct tcpc_dev *tcpc, u32 max_ma, u32 mv)
+{
+	return 0;
+}
+
+static int wcove_set_roles(struct tcpc_dev *tcpc, bool attached,
+			   enum typec_role role, enum typec_data_role data)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+	unsigned int val;
+	int ret;
+
+	ret = wcove_typec_func(wcove, WCOVE_FUNC_ROLE, data == TYPEC_HOST ?
+			       WCOVE_ROLE_HOST : WCOVE_ROLE_DEVICE);
+	if (ret)
+		return ret;
+
+	val = role;
+	val |= data << USBC_PDCFG3_DATAROLE_SHIFT;
+	val |= PD_REV20 << USBC_PDCFG3_SOP_SHIFT;
+
+	return regmap_write(wcove->regmap, USBC_PDCFG3, val);
+}
+
+static int wcove_set_pd_rx(struct tcpc_dev *tcpc, bool on)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+
+	return regmap_write(wcove->regmap, USBC_PDCFG2,
+			    on ? USBC_PDCFG2_SOP : 0);
+}
+
+static int wcove_pd_transmit(struct tcpc_dev *tcpc,
+			     enum tcpm_transmit_type type,
+			     const struct pd_message *msg,
+			     unsigned int negotiated_rev)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+	unsigned int info = 0;
+	unsigned int cmd;
+	int ret;
+
+	ret = regmap_read(wcove->regmap, USBC_TXCMD, &cmd);
+	if (ret)
+		return ret;
+
+	if (!(cmd & USBC_TXCMD_BUF_RDY)) {
+		dev_warn(wcove->dev, "%s: Last transmission still ongoing!",
+			 __func__);
+		return -EBUSY;
+	}
+
+	if (msg) {
+		const u8 *data = (void *)msg;
+		int i;
+
+		for (i = 0; i < pd_header_cnt_le(msg->header) * 4 + 2; i++) {
+			ret = regmap_write(wcove->regmap, USBC_TX_DATA + i,
+					   data[i]);
+			if (ret)
+				return ret;
+		}
+	}
+
+	switch (type) {
+	case TCPC_TX_SOP:
+	case TCPC_TX_SOP_PRIME:
+	case TCPC_TX_SOP_PRIME_PRIME:
+	case TCPC_TX_SOP_DEBUG_PRIME:
+	case TCPC_TX_SOP_DEBUG_PRIME_PRIME:
+		info = type + 1;
+		cmd = USBC_TXCMD_MSG;
+		break;
+	case TCPC_TX_HARD_RESET:
+		cmd = USBC_TXCMD_HR;
+		break;
+	case TCPC_TX_CABLE_RESET:
+		cmd = USBC_TXCMD_CR;
+		break;
+	case TCPC_TX_BIST_MODE_2:
+		cmd = USBC_TXCMD_BIST;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* NOTE Setting maximum number of retries (7) */
+	ret = regmap_write(wcove->regmap, USBC_TXINFO,
+			   info | USBC_TXINFO_RETRIES(7));
+	if (ret)
+		return ret;
+
+	return regmap_write(wcove->regmap, USBC_TXCMD, cmd | USBC_TXCMD_START);
+}
+
+static int wcove_start_toggling(struct tcpc_dev *tcpc,
+				enum typec_port_type port_type,
+				enum typec_cc_status cc)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+	unsigned int usbc_ctrl;
+
+	if (port_type != TYPEC_PORT_DRP)
+		return -EOPNOTSUPP;
+
+	usbc_ctrl = USBC_CONTROL1_MODE_DRP | USBC_CONTROL1_DRPTOGGLE_RANDOM;
+
+	switch (cc) {
+	case TYPEC_CC_RP_1_5:
+		usbc_ctrl |= USBC_CONTROL1_CURSRC_UA_180;
+		break;
+	case TYPEC_CC_RP_3_0:
+		usbc_ctrl |= USBC_CONTROL1_CURSRC_UA_330;
+		break;
+	default:
+		usbc_ctrl |= USBC_CONTROL1_CURSRC_UA_80;
+		break;
+	}
+
+	return regmap_write(wcove->regmap, USBC_CONTROL1, usbc_ctrl);
+}
+
+static int wcove_read_rx_buffer(struct wcove_typec *wcove, void *msg)
+{
+	unsigned int info;
+	int ret;
+	int i;
+
+	ret = regmap_read(wcove->regmap, USBC_RXINFO, &info);
+	if (ret)
+		return ret;
+
+	/* FIXME: Check that USBC_RXINFO_RXBYTES(info) matches the header */
+
+	for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++) {
+		ret = regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i);
+		if (ret)
+			return ret;
+	}
+
+	return regmap_write(wcove->regmap, USBC_RXSTATUS,
+			    USBC_RXSTATUS_RXCLEAR);
+}
+
+static irqreturn_t wcove_typec_irq(int irq, void *data)
+{
+	struct wcove_typec *wcove = data;
+	unsigned int usbc_irq1 = 0;
+	unsigned int usbc_irq2 = 0;
+	unsigned int cc1ctrl;
+	int ret;
+
+	mutex_lock(&wcove->lock);
+
+	/* Read.. */
+	ret = regmap_read(wcove->regmap, USBC_IRQ1, &usbc_irq1);
+	if (ret)
+		goto err;
+
+	ret = regmap_read(wcove->regmap, USBC_IRQ2, &usbc_irq2);
+	if (ret)
+		goto err;
+
+	ret = regmap_read(wcove->regmap, USBC_CC1_CTRL, &cc1ctrl);
+	if (ret)
+		goto err;
+
+	if (!wcove->tcpm)
+		goto err;
+
+	/* ..check.. */
+	if (usbc_irq1 & USBC_IRQ1_OVERTEMP) {
+		dev_err(wcove->dev, "VCONN Switch Over Temperature!\n");
+		wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, false);
+		/* REVISIT: Report an error? */
+	}
+
+	if (usbc_irq1 & USBC_IRQ1_SHORT) {
+		dev_err(wcove->dev, "VCONN Switch Short Circuit!\n");
+		wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, false);
+		/* REVISIT: Report an error? */
+	}
+
+	if (wcove->vbus != !!(cc1ctrl & USBC_CC_CTRL_VBUSOK))
+		tcpm_vbus_change(wcove->tcpm);
+
+	/* REVISIT: See if tcpm code can be made to consider Type-C HW FSMs */
+	if (usbc_irq2 & USBC_IRQ2_CC_CHANGE)
+		tcpm_cc_change(wcove->tcpm);
+
+	if (usbc_irq2 & USBC_IRQ2_RX_PD) {
+		unsigned int status;
+
+		/*
+		 * FIXME: Need to check if TX is ongoing and report
+		 * TX_DIREGARDED if needed?
+		 */
+
+		ret = regmap_read(wcove->regmap, USBC_RXSTATUS, &status);
+		if (ret)
+			goto err;
+
+		/* Flush all buffers */
+		while (status & USBC_RXSTATUS_RXDATA) {
+			struct pd_message msg;
+
+			ret = wcove_read_rx_buffer(wcove, &msg);
+			if (ret) {
+				dev_err(wcove->dev, "%s: RX read failed\n",
+					__func__);
+				goto err;
+			}
+
+			tcpm_pd_receive(wcove->tcpm, &msg);
+
+			ret = regmap_read(wcove->regmap, USBC_RXSTATUS,
+					  &status);
+			if (ret)
+				goto err;
+		}
+	}
+
+	if (usbc_irq2 & USBC_IRQ2_RX_HR)
+		tcpm_pd_hard_reset(wcove->tcpm);
+
+	/* REVISIT: if (usbc_irq2 & USBC_IRQ2_RX_CR) */
+
+	if (usbc_irq2 & USBC_IRQ2_TX_SUCCESS)
+		tcpm_pd_transmit_complete(wcove->tcpm, TCPC_TX_SUCCESS);
+
+	if (usbc_irq2 & USBC_IRQ2_TX_FAIL)
+		tcpm_pd_transmit_complete(wcove->tcpm, TCPC_TX_FAILED);
+
+err:
+	/* ..and clear. */
+	if (usbc_irq1) {
+		ret = regmap_write(wcove->regmap, USBC_IRQ1, usbc_irq1);
+		if (ret)
+			dev_WARN(wcove->dev, "%s failed to clear IRQ1\n",
+				 __func__);
+	}
+
+	if (usbc_irq2) {
+		ret = regmap_write(wcove->regmap, USBC_IRQ2, usbc_irq2);
+		if (ret)
+			dev_WARN(wcove->dev, "%s failed to clear IRQ2\n",
+				 __func__);
+	}
+
+	/* REVISIT: Clear WhiskeyCove CHGR Type-C interrupt */
+	regmap_write(wcove->regmap, WCOVE_CHGRIRQ0, BIT(5));
+
+	mutex_unlock(&wcove->lock);
+	return IRQ_HANDLED;
+}
+
+/*
+ * The following power levels should be safe to use with Joule board.
+ */
+static const u32 src_pdo[] = {
+	PDO_FIXED(5000, 1500, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP |
+		  PDO_FIXED_USB_COMM),
+};
+
+static const u32 snk_pdo[] = {
+	PDO_FIXED(5000, 500, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP |
+		  PDO_FIXED_USB_COMM),
+	PDO_VAR(5000, 12000, 3000),
+};
+
+static const struct property_entry wcove_props[] = {
+	PROPERTY_ENTRY_STRING("data-role", "dual"),
+	PROPERTY_ENTRY_STRING("power-role", "dual"),
+	PROPERTY_ENTRY_STRING("try-power-role", "sink"),
+	PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo),
+	PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo),
+	PROPERTY_ENTRY_U32("op-sink-microwatt", 15000000),
+	{ }
+};
+
+static int wcove_typec_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+	struct wcove_typec *wcove;
+	int irq;
+	int ret;
+
+	wcove = devm_kzalloc(&pdev->dev, sizeof(*wcove), GFP_KERNEL);
+	if (!wcove)
+		return -ENOMEM;
+
+	mutex_init(&wcove->lock);
+	wcove->dev = &pdev->dev;
+	wcove->regmap = pmic->regmap;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	irq = regmap_irq_get_virq(pmic->irq_chip_data_chgr, irq);
+	if (irq < 0)
+		return irq;
+
+	ret = guid_parse(WCOVE_DSM_UUID, &wcove->guid);
+	if (ret)
+		return ret;
+
+	if (!acpi_check_dsm(ACPI_HANDLE(&pdev->dev), &wcove->guid, 0, 0x1f)) {
+		dev_err(&pdev->dev, "Missing _DSM functions\n");
+		return -ENODEV;
+	}
+
+	wcove->tcpc.init = wcove_init;
+	wcove->tcpc.get_vbus = wcove_get_vbus;
+	wcove->tcpc.set_vbus = wcove_set_vbus;
+	wcove->tcpc.set_cc = wcove_set_cc;
+	wcove->tcpc.get_cc = wcove_get_cc;
+	wcove->tcpc.set_polarity = wcove_set_polarity;
+	wcove->tcpc.set_vconn = wcove_set_vconn;
+	wcove->tcpc.set_current_limit = wcove_set_current_limit;
+	wcove->tcpc.start_toggling = wcove_start_toggling;
+
+	wcove->tcpc.set_pd_rx = wcove_set_pd_rx;
+	wcove->tcpc.set_roles = wcove_set_roles;
+	wcove->tcpc.pd_transmit = wcove_pd_transmit;
+
+	wcove->tcpc.fwnode = fwnode_create_software_node(wcove_props, NULL);
+	if (IS_ERR(wcove->tcpc.fwnode))
+		return PTR_ERR(wcove->tcpc.fwnode);
+
+	wcove->tcpm = tcpm_register_port(wcove->dev, &wcove->tcpc);
+	if (IS_ERR(wcove->tcpm)) {
+		fwnode_remove_software_node(wcove->tcpc.fwnode);
+		return PTR_ERR(wcove->tcpm);
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+					wcove_typec_irq, IRQF_ONESHOT,
+					"wcove_typec", wcove);
+	if (ret) {
+		tcpm_unregister_port(wcove->tcpm);
+		fwnode_remove_software_node(wcove->tcpc.fwnode);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, wcove);
+	return 0;
+}
+
+static int wcove_typec_remove(struct platform_device *pdev)
+{
+	struct wcove_typec *wcove = platform_get_drvdata(pdev);
+	unsigned int val;
+
+	/* Mask everything */
+	regmap_read(wcove->regmap, USBC_IRQMASK1, &val);
+	regmap_write(wcove->regmap, USBC_IRQMASK1, val | USBC_IRQMASK1_ALL);
+	regmap_read(wcove->regmap, USBC_IRQMASK2, &val);
+	regmap_write(wcove->regmap, USBC_IRQMASK2, val | USBC_IRQMASK2_ALL);
+
+	tcpm_unregister_port(wcove->tcpm);
+	fwnode_remove_software_node(wcove->tcpc.fwnode);
+
+	return 0;
+}
+
+static struct platform_driver wcove_typec_driver = {
+	.driver = {
+		.name		= "bxt_wcove_usbc",
+	},
+	.probe			= wcove_typec_probe,
+	.remove			= wcove_typec_remove,
+};
+
+module_platform_driver(wcove_typec_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("WhiskeyCove PMIC USB Type-C PHY driver");
+MODULE_ALIAS("platform:bxt_wcove_usbc");
diff --git a/drivers/usb/typec/tipd/Kconfig b/drivers/usb/typec/tipd/Kconfig
new file mode 100644
index 000000000..b82715293
--- /dev/null
+++ b/drivers/usb/typec/tipd/Kconfig
@@ -0,0 +1,12 @@
+config TYPEC_TPS6598X
+	tristate "TI TPS6598x USB Power Delivery controller driver"
+	depends on I2C
+	select POWER_SUPPLY
+	select REGMAP_I2C
+	select USB_ROLE_SWITCH
+	help
+	  Say Y or M here if your system has TI TPS65982 or TPS65983 USB Power
+	  Delivery controller.
+
+	  If you choose to build this driver as a dynamically linked module, the
+	  module will be called tps6598x.ko.
diff --git a/drivers/usb/typec/tipd/Makefile b/drivers/usb/typec/tipd/Makefile
new file mode 100644
index 000000000..aa439f80a
--- /dev/null
+++ b/drivers/usb/typec/tipd/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+CFLAGS_trace.o			:= -I$(src)
+
+obj-$(CONFIG_TYPEC_TPS6598X)	+= tps6598x.o
+tps6598x-y			:= core.o
+tps6598x-$(CONFIG_TRACING)	+= trace.o
diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
new file mode 100644
index 000000000..195c9c16f
--- /dev/null
+++ b/drivers/usb/typec/tipd/core.c
@@ -0,0 +1,896 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for TI TPS6598x USB Power Delivery controller family
+ *
+ * Copyright (C) 2017, Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/interrupt.h>
+#include <linux/usb/typec.h>
+#include <linux/usb/role.h>
+
+#include "tps6598x.h"
+#include "trace.h"
+
+/* Register offsets */
+#define TPS_REG_VID			0x00
+#define TPS_REG_MODE			0x03
+#define TPS_REG_CMD1			0x08
+#define TPS_REG_DATA1			0x09
+#define TPS_REG_INT_EVENT1		0x14
+#define TPS_REG_INT_EVENT2		0x15
+#define TPS_REG_INT_MASK1		0x16
+#define TPS_REG_INT_MASK2		0x17
+#define TPS_REG_INT_CLEAR1		0x18
+#define TPS_REG_INT_CLEAR2		0x19
+#define TPS_REG_SYSTEM_POWER_STATE	0x20
+#define TPS_REG_STATUS			0x1a
+#define TPS_REG_SYSTEM_CONF		0x28
+#define TPS_REG_CTRL_CONF		0x29
+#define TPS_REG_POWER_STATUS		0x3f
+#define TPS_REG_RX_IDENTITY_SOP		0x48
+#define TPS_REG_DATA_STATUS		0x5f
+
+/* TPS_REG_SYSTEM_CONF bits */
+#define TPS_SYSCONF_PORTINFO(c)		((c) & 7)
+
+enum {
+	TPS_PORTINFO_SINK,
+	TPS_PORTINFO_SINK_ACCESSORY,
+	TPS_PORTINFO_DRP_UFP,
+	TPS_PORTINFO_DRP_UFP_DRD,
+	TPS_PORTINFO_DRP_DFP,
+	TPS_PORTINFO_DRP_DFP_DRD,
+	TPS_PORTINFO_SOURCE,
+};
+
+/* TPS_REG_RX_IDENTITY_SOP */
+struct tps6598x_rx_identity_reg {
+	u8 status;
+	struct usb_pd_identity identity;
+} __packed;
+
+/* Standard Task return codes */
+#define TPS_TASK_TIMEOUT		1
+#define TPS_TASK_REJECTED		3
+
+enum {
+	TPS_MODE_APP,
+	TPS_MODE_BOOT,
+	TPS_MODE_BIST,
+	TPS_MODE_DISC,
+};
+
+static const char *const modes[] = {
+	[TPS_MODE_APP]	= "APP ",
+	[TPS_MODE_BOOT]	= "BOOT",
+	[TPS_MODE_BIST]	= "BIST",
+	[TPS_MODE_DISC]	= "DISC",
+};
+
+/* Unrecognized commands will be replaced with "!CMD" */
+#define INVALID_CMD(_cmd_)		(_cmd_ == 0x444d4321)
+
+struct tps6598x {
+	struct device *dev;
+	struct regmap *regmap;
+	struct mutex lock; /* device lock */
+	u8 i2c_protocol:1;
+
+	struct typec_port *port;
+	struct typec_partner *partner;
+	struct usb_pd_identity partner_identity;
+	struct usb_role_switch *role_sw;
+	struct typec_capability typec_cap;
+
+	struct power_supply *psy;
+	struct power_supply_desc psy_desc;
+	enum power_supply_usb_type usb_type;
+
+	u16 pwr_status;
+};
+
+static enum power_supply_property tps6598x_psy_props[] = {
+	POWER_SUPPLY_PROP_USB_TYPE,
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static enum power_supply_usb_type tps6598x_psy_usb_types[] = {
+	POWER_SUPPLY_USB_TYPE_C,
+	POWER_SUPPLY_USB_TYPE_PD,
+};
+
+static const char *tps6598x_psy_name_prefix = "tps6598x-source-psy-";
+
+/*
+ * Max data bytes for Data1, Data2, and other registers. See ch 1.3.2:
+ * https://www.ti.com/lit/ug/slvuan1a/slvuan1a.pdf
+ */
+#define TPS_MAX_LEN	64
+
+static int
+tps6598x_block_read(struct tps6598x *tps, u8 reg, void *val, size_t len)
+{
+	u8 data[TPS_MAX_LEN + 1];
+	int ret;
+
+	if (len + 1 > sizeof(data))
+		return -EINVAL;
+
+	if (!tps->i2c_protocol)
+		return regmap_raw_read(tps->regmap, reg, val, len);
+
+	ret = regmap_raw_read(tps->regmap, reg, data, len + 1);
+	if (ret)
+		return ret;
+
+	if (data[0] < len)
+		return -EIO;
+
+	memcpy(val, &data[1], len);
+	return 0;
+}
+
+static int tps6598x_block_write(struct tps6598x *tps, u8 reg,
+				const void *val, size_t len)
+{
+	u8 data[TPS_MAX_LEN + 1];
+
+	if (len + 1 > sizeof(data))
+		return -EINVAL;
+
+	if (!tps->i2c_protocol)
+		return regmap_raw_write(tps->regmap, reg, val, len);
+
+	data[0] = len;
+	memcpy(&data[1], val, len);
+
+	return regmap_raw_write(tps->regmap, reg, data, len + 1);
+}
+
+static inline int tps6598x_read8(struct tps6598x *tps, u8 reg, u8 *val)
+{
+	return tps6598x_block_read(tps, reg, val, sizeof(u8));
+}
+
+static inline int tps6598x_read16(struct tps6598x *tps, u8 reg, u16 *val)
+{
+	return tps6598x_block_read(tps, reg, val, sizeof(u16));
+}
+
+static inline int tps6598x_read32(struct tps6598x *tps, u8 reg, u32 *val)
+{
+	return tps6598x_block_read(tps, reg, val, sizeof(u32));
+}
+
+static inline int tps6598x_read64(struct tps6598x *tps, u8 reg, u64 *val)
+{
+	return tps6598x_block_read(tps, reg, val, sizeof(u64));
+}
+
+static inline int tps6598x_write16(struct tps6598x *tps, u8 reg, u16 val)
+{
+	return tps6598x_block_write(tps, reg, &val, sizeof(u16));
+}
+
+static inline int tps6598x_write32(struct tps6598x *tps, u8 reg, u32 val)
+{
+	return tps6598x_block_write(tps, reg, &val, sizeof(u32));
+}
+
+static inline int tps6598x_write64(struct tps6598x *tps, u8 reg, u64 val)
+{
+	return tps6598x_block_write(tps, reg, &val, sizeof(u64));
+}
+
+static inline int
+tps6598x_write_4cc(struct tps6598x *tps, u8 reg, const char *val)
+{
+	return tps6598x_block_write(tps, reg, val, 4);
+}
+
+static int tps6598x_read_partner_identity(struct tps6598x *tps)
+{
+	struct tps6598x_rx_identity_reg id;
+	int ret;
+
+	ret = tps6598x_block_read(tps, TPS_REG_RX_IDENTITY_SOP,
+				  &id, sizeof(id));
+	if (ret)
+		return ret;
+
+	tps->partner_identity = id.identity;
+
+	return 0;
+}
+
+static void tps6598x_set_data_role(struct tps6598x *tps,
+				   enum typec_data_role role, bool connected)
+{
+	enum usb_role role_val;
+
+	if (role == TYPEC_HOST)
+		role_val = USB_ROLE_HOST;
+	else
+		role_val = USB_ROLE_DEVICE;
+
+	if (!connected)
+		role_val = USB_ROLE_NONE;
+
+	usb_role_switch_set_role(tps->role_sw, role_val);
+	typec_set_data_role(tps->port, role);
+}
+
+static int tps6598x_connect(struct tps6598x *tps, u32 status)
+{
+	struct typec_partner_desc desc;
+	enum typec_pwr_opmode mode;
+	int ret;
+
+	if (tps->partner)
+		return 0;
+
+	mode = TPS_POWER_STATUS_PWROPMODE(tps->pwr_status);
+
+	desc.usb_pd = mode == TYPEC_PWR_MODE_PD;
+	desc.accessory = TYPEC_ACCESSORY_NONE; /* XXX: handle accessories */
+	desc.identity = NULL;
+
+	if (desc.usb_pd) {
+		ret = tps6598x_read_partner_identity(tps);
+		if (ret)
+			return ret;
+		desc.identity = &tps->partner_identity;
+	}
+
+	typec_set_pwr_opmode(tps->port, mode);
+	typec_set_pwr_role(tps->port, TPS_STATUS_TO_TYPEC_PORTROLE(status));
+	typec_set_vconn_role(tps->port, TPS_STATUS_TO_TYPEC_VCONN(status));
+	if (TPS_STATUS_TO_UPSIDE_DOWN(status))
+		typec_set_orientation(tps->port, TYPEC_ORIENTATION_REVERSE);
+	else
+		typec_set_orientation(tps->port, TYPEC_ORIENTATION_NORMAL);
+	tps6598x_set_data_role(tps, TPS_STATUS_TO_TYPEC_DATAROLE(status), true);
+
+	tps->partner = typec_register_partner(tps->port, &desc);
+	if (IS_ERR(tps->partner))
+		return PTR_ERR(tps->partner);
+
+	if (desc.identity)
+		typec_partner_set_identity(tps->partner);
+
+	power_supply_changed(tps->psy);
+
+	return 0;
+}
+
+static void tps6598x_disconnect(struct tps6598x *tps, u32 status)
+{
+	if (!IS_ERR(tps->partner))
+		typec_unregister_partner(tps->partner);
+	tps->partner = NULL;
+	typec_set_pwr_opmode(tps->port, TYPEC_PWR_MODE_USB);
+	typec_set_pwr_role(tps->port, TPS_STATUS_TO_TYPEC_PORTROLE(status));
+	typec_set_vconn_role(tps->port, TPS_STATUS_TO_TYPEC_VCONN(status));
+	typec_set_orientation(tps->port, TYPEC_ORIENTATION_NONE);
+	tps6598x_set_data_role(tps, TPS_STATUS_TO_TYPEC_DATAROLE(status), false);
+
+	power_supply_changed(tps->psy);
+}
+
+static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
+			     size_t in_len, u8 *in_data,
+			     size_t out_len, u8 *out_data)
+{
+	unsigned long timeout;
+	u32 val;
+	int ret;
+
+	ret = tps6598x_read32(tps, TPS_REG_CMD1, &val);
+	if (ret)
+		return ret;
+	if (val && !INVALID_CMD(val))
+		return -EBUSY;
+
+	if (in_len) {
+		ret = tps6598x_block_write(tps, TPS_REG_DATA1,
+					   in_data, in_len);
+		if (ret)
+			return ret;
+	}
+
+	ret = tps6598x_write_4cc(tps, TPS_REG_CMD1, cmd);
+	if (ret < 0)
+		return ret;
+
+	/* XXX: Using 1s for now, but it may not be enough for every command. */
+	timeout = jiffies + msecs_to_jiffies(1000);
+
+	do {
+		ret = tps6598x_read32(tps, TPS_REG_CMD1, &val);
+		if (ret)
+			return ret;
+		if (INVALID_CMD(val))
+			return -EINVAL;
+
+		if (time_is_before_jiffies(timeout))
+			return -ETIMEDOUT;
+	} while (val);
+
+	if (out_len) {
+		ret = tps6598x_block_read(tps, TPS_REG_DATA1,
+					  out_data, out_len);
+		if (ret)
+			return ret;
+		val = out_data[0];
+	} else {
+		ret = tps6598x_block_read(tps, TPS_REG_DATA1, &val, sizeof(u8));
+		if (ret)
+			return ret;
+	}
+
+	switch (val) {
+	case TPS_TASK_TIMEOUT:
+		return -ETIMEDOUT;
+	case TPS_TASK_REJECTED:
+		return -EPERM;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int tps6598x_dr_set(struct typec_port *port, enum typec_data_role role)
+{
+	const char *cmd = (role == TYPEC_DEVICE) ? "SWUF" : "SWDF";
+	struct tps6598x *tps = typec_get_drvdata(port);
+	u32 status;
+	int ret;
+
+	mutex_lock(&tps->lock);
+
+	ret = tps6598x_exec_cmd(tps, cmd, 0, NULL, 0, NULL);
+	if (ret)
+		goto out_unlock;
+
+	ret = tps6598x_read32(tps, TPS_REG_STATUS, &status);
+	if (ret)
+		goto out_unlock;
+
+	if (role != TPS_STATUS_TO_TYPEC_DATAROLE(status)) {
+		ret = -EPROTO;
+		goto out_unlock;
+	}
+
+	tps6598x_set_data_role(tps, role, true);
+
+out_unlock:
+	mutex_unlock(&tps->lock);
+
+	return ret;
+}
+
+static int tps6598x_pr_set(struct typec_port *port, enum typec_role role)
+{
+	const char *cmd = (role == TYPEC_SINK) ? "SWSk" : "SWSr";
+	struct tps6598x *tps = typec_get_drvdata(port);
+	u32 status;
+	int ret;
+
+	mutex_lock(&tps->lock);
+
+	ret = tps6598x_exec_cmd(tps, cmd, 0, NULL, 0, NULL);
+	if (ret)
+		goto out_unlock;
+
+	ret = tps6598x_read32(tps, TPS_REG_STATUS, &status);
+	if (ret)
+		goto out_unlock;
+
+	if (role != TPS_STATUS_TO_TYPEC_PORTROLE(status)) {
+		ret = -EPROTO;
+		goto out_unlock;
+	}
+
+	typec_set_pwr_role(tps->port, role);
+
+out_unlock:
+	mutex_unlock(&tps->lock);
+
+	return ret;
+}
+
+static const struct typec_operations tps6598x_ops = {
+	.dr_set = tps6598x_dr_set,
+	.pr_set = tps6598x_pr_set,
+};
+
+static bool tps6598x_read_status(struct tps6598x *tps, u32 *status)
+{
+	int ret;
+
+	ret = tps6598x_read32(tps, TPS_REG_STATUS, status);
+	if (ret) {
+		dev_err(tps->dev, "%s: failed to read status\n", __func__);
+		return false;
+	}
+	trace_tps6598x_status(*status);
+
+	return true;
+}
+
+static bool tps6598x_read_data_status(struct tps6598x *tps)
+{
+	u32 data_status;
+	int ret;
+
+	ret = tps6598x_read32(tps, TPS_REG_DATA_STATUS, &data_status);
+	if (ret < 0) {
+		dev_err(tps->dev, "failed to read data status: %d\n", ret);
+		return false;
+	}
+	trace_tps6598x_data_status(data_status);
+
+	return true;
+}
+
+static bool tps6598x_read_power_status(struct tps6598x *tps)
+{
+	u16 pwr_status;
+	int ret;
+
+	ret = tps6598x_read16(tps, TPS_REG_POWER_STATUS, &pwr_status);
+	if (ret < 0) {
+		dev_err(tps->dev, "failed to read power status: %d\n", ret);
+		return false;
+	}
+	tps->pwr_status = pwr_status;
+	trace_tps6598x_power_status(pwr_status);
+
+	return true;
+}
+
+static void tps6598x_handle_plug_event(struct tps6598x *tps, u32 status)
+{
+	int ret;
+
+	if (status & TPS_STATUS_PLUG_PRESENT) {
+		ret = tps6598x_connect(tps, status);
+		if (ret)
+			dev_err(tps->dev, "failed to register partner\n");
+	} else {
+		tps6598x_disconnect(tps, status);
+	}
+}
+
+static irqreturn_t cd321x_interrupt(int irq, void *data)
+{
+	struct tps6598x *tps = data;
+	u64 event = 0;
+	u32 status;
+	int ret;
+
+	mutex_lock(&tps->lock);
+
+	ret = tps6598x_read64(tps, TPS_REG_INT_EVENT1, &event);
+	if (ret) {
+		dev_err(tps->dev, "%s: failed to read events\n", __func__);
+		goto err_unlock;
+	}
+	trace_cd321x_irq(event);
+
+	if (!event)
+		goto err_unlock;
+
+	if (!tps6598x_read_status(tps, &status))
+		goto err_clear_ints;
+
+	if (event & APPLE_CD_REG_INT_POWER_STATUS_UPDATE)
+		if (!tps6598x_read_power_status(tps))
+			goto err_clear_ints;
+
+	if (event & APPLE_CD_REG_INT_DATA_STATUS_UPDATE)
+		if (!tps6598x_read_data_status(tps))
+			goto err_clear_ints;
+
+	/* Handle plug insert or removal */
+	if (event & APPLE_CD_REG_INT_PLUG_EVENT)
+		tps6598x_handle_plug_event(tps, status);
+
+err_clear_ints:
+	tps6598x_write64(tps, TPS_REG_INT_CLEAR1, event);
+
+err_unlock:
+	mutex_unlock(&tps->lock);
+
+	if (event)
+		return IRQ_HANDLED;
+	return IRQ_NONE;
+}
+
+static irqreturn_t tps6598x_interrupt(int irq, void *data)
+{
+	struct tps6598x *tps = data;
+	u64 event1 = 0;
+	u64 event2 = 0;
+	u32 status;
+	int ret;
+
+	mutex_lock(&tps->lock);
+
+	ret = tps6598x_read64(tps, TPS_REG_INT_EVENT1, &event1);
+	ret |= tps6598x_read64(tps, TPS_REG_INT_EVENT2, &event2);
+	if (ret) {
+		dev_err(tps->dev, "%s: failed to read events\n", __func__);
+		goto err_unlock;
+	}
+	trace_tps6598x_irq(event1, event2);
+
+	if (!(event1 | event2))
+		goto err_unlock;
+
+	if (!tps6598x_read_status(tps, &status))
+		goto err_clear_ints;
+
+	if ((event1 | event2) & TPS_REG_INT_POWER_STATUS_UPDATE)
+		if (!tps6598x_read_power_status(tps))
+			goto err_clear_ints;
+
+	if ((event1 | event2) & TPS_REG_INT_DATA_STATUS_UPDATE)
+		if (!tps6598x_read_data_status(tps))
+			goto err_clear_ints;
+
+	/* Handle plug insert or removal */
+	if ((event1 | event2) & TPS_REG_INT_PLUG_EVENT)
+		tps6598x_handle_plug_event(tps, status);
+
+err_clear_ints:
+	tps6598x_write64(tps, TPS_REG_INT_CLEAR1, event1);
+	tps6598x_write64(tps, TPS_REG_INT_CLEAR2, event2);
+
+err_unlock:
+	mutex_unlock(&tps->lock);
+
+	if (event1 | event2)
+		return IRQ_HANDLED;
+	return IRQ_NONE;
+}
+
+static int tps6598x_check_mode(struct tps6598x *tps)
+{
+	char mode[5] = { };
+	int ret;
+
+	ret = tps6598x_read32(tps, TPS_REG_MODE, (void *)mode);
+	if (ret)
+		return ret;
+
+	switch (match_string(modes, ARRAY_SIZE(modes), mode)) {
+	case TPS_MODE_APP:
+		return 0;
+	case TPS_MODE_BOOT:
+		dev_warn(tps->dev, "dead-battery condition\n");
+		return 0;
+	case TPS_MODE_BIST:
+	case TPS_MODE_DISC:
+	default:
+		dev_err(tps->dev, "controller in unsupported mode \"%s\"\n",
+			mode);
+		break;
+	}
+
+	return -ENODEV;
+}
+
+static const struct regmap_config tps6598x_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x7F,
+};
+
+static int tps6598x_psy_get_online(struct tps6598x *tps,
+				   union power_supply_propval *val)
+{
+	if (TPS_POWER_STATUS_CONNECTION(tps->pwr_status) &&
+	    TPS_POWER_STATUS_SOURCESINK(tps->pwr_status)) {
+		val->intval = 1;
+	} else {
+		val->intval = 0;
+	}
+	return 0;
+}
+
+static int tps6598x_psy_get_prop(struct power_supply *psy,
+				 enum power_supply_property psp,
+				 union power_supply_propval *val)
+{
+	struct tps6598x *tps = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		if (TPS_POWER_STATUS_PWROPMODE(tps->pwr_status) == TYPEC_PWR_MODE_PD)
+			val->intval = POWER_SUPPLY_USB_TYPE_PD;
+		else
+			val->intval = POWER_SUPPLY_USB_TYPE_C;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = tps6598x_psy_get_online(tps, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static int cd321x_switch_power_state(struct tps6598x *tps, u8 target_state)
+{
+	u8 state;
+	int ret;
+
+	ret = tps6598x_read8(tps, TPS_REG_SYSTEM_POWER_STATE, &state);
+	if (ret)
+		return ret;
+
+	if (state == target_state)
+		return 0;
+
+	ret = tps6598x_exec_cmd(tps, "SSPS", sizeof(u8), &target_state, 0, NULL);
+	if (ret)
+		return ret;
+
+	ret = tps6598x_read8(tps, TPS_REG_SYSTEM_POWER_STATE, &state);
+	if (ret)
+		return ret;
+
+	if (state != target_state)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int devm_tps6598_psy_register(struct tps6598x *tps)
+{
+	struct power_supply_config psy_cfg = {};
+	const char *port_dev_name = dev_name(tps->dev);
+	char *psy_name;
+
+	psy_cfg.drv_data = tps;
+	psy_cfg.fwnode = dev_fwnode(tps->dev);
+
+	psy_name = devm_kasprintf(tps->dev, GFP_KERNEL, "%s%s", tps6598x_psy_name_prefix,
+				  port_dev_name);
+	if (!psy_name)
+		return -ENOMEM;
+
+	tps->psy_desc.name = psy_name;
+	tps->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+	tps->psy_desc.usb_types = tps6598x_psy_usb_types;
+	tps->psy_desc.num_usb_types = ARRAY_SIZE(tps6598x_psy_usb_types);
+	tps->psy_desc.properties = tps6598x_psy_props;
+	tps->psy_desc.num_properties = ARRAY_SIZE(tps6598x_psy_props);
+	tps->psy_desc.get_property = tps6598x_psy_get_prop;
+
+	tps->usb_type = POWER_SUPPLY_USB_TYPE_C;
+
+	tps->psy = devm_power_supply_register(tps->dev, &tps->psy_desc,
+					       &psy_cfg);
+	return PTR_ERR_OR_ZERO(tps->psy);
+}
+
+static int tps6598x_probe(struct i2c_client *client)
+{
+	irq_handler_t irq_handler = tps6598x_interrupt;
+	struct device_node *np = client->dev.of_node;
+	struct typec_capability typec_cap = { };
+	struct tps6598x *tps;
+	struct fwnode_handle *fwnode;
+	u32 status;
+	u32 conf;
+	u32 vid;
+	int ret;
+	u64 mask1;
+
+	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+	if (!tps)
+		return -ENOMEM;
+
+	mutex_init(&tps->lock);
+	tps->dev = &client->dev;
+
+	tps->regmap = devm_regmap_init_i2c(client, &tps6598x_regmap_config);
+	if (IS_ERR(tps->regmap))
+		return PTR_ERR(tps->regmap);
+
+	ret = tps6598x_read32(tps, TPS_REG_VID, &vid);
+	if (ret < 0 || !vid)
+		return -ENODEV;
+
+	/*
+	 * Checking can the adapter handle SMBus protocol. If it can not, the
+	 * driver needs to take care of block reads separately.
+	 */
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		tps->i2c_protocol = true;
+
+	if (np && of_device_is_compatible(np, "apple,cd321x")) {
+		/* Switch CD321X chips to the correct system power state */
+		ret = cd321x_switch_power_state(tps, TPS_SYSTEM_POWER_STATE_S0);
+		if (ret)
+			return ret;
+
+		/* CD321X chips have all interrupts masked initially */
+		mask1 = APPLE_CD_REG_INT_POWER_STATUS_UPDATE |
+			APPLE_CD_REG_INT_DATA_STATUS_UPDATE |
+			APPLE_CD_REG_INT_PLUG_EVENT;
+
+		irq_handler = cd321x_interrupt;
+	} else {
+		/* Enable power status, data status and plug event interrupts */
+		mask1 = TPS_REG_INT_POWER_STATUS_UPDATE |
+			TPS_REG_INT_DATA_STATUS_UPDATE |
+			TPS_REG_INT_PLUG_EVENT;
+	}
+
+	/* Make sure the controller has application firmware running */
+	ret = tps6598x_check_mode(tps);
+	if (ret)
+		return ret;
+
+	ret = tps6598x_write64(tps, TPS_REG_INT_MASK1, mask1);
+	if (ret)
+		return ret;
+
+	ret = tps6598x_read32(tps, TPS_REG_STATUS, &status);
+	if (ret < 0)
+		goto err_clear_mask;
+	trace_tps6598x_status(status);
+
+	ret = tps6598x_read32(tps, TPS_REG_SYSTEM_CONF, &conf);
+	if (ret < 0)
+		goto err_clear_mask;
+
+	/*
+	 * This fwnode has a "compatible" property, but is never populated as a
+	 * struct device. Instead we simply parse it to read the properties.
+	 * This breaks fw_devlink=on. To maintain backward compatibility
+	 * with existing DT files, we work around this by deleting any
+	 * fwnode_links to/from this fwnode.
+	 */
+	fwnode = device_get_named_child_node(&client->dev, "connector");
+	if (fwnode)
+		fw_devlink_purge_absent_suppliers(fwnode);
+
+	tps->role_sw = fwnode_usb_role_switch_get(fwnode);
+	if (IS_ERR(tps->role_sw)) {
+		ret = PTR_ERR(tps->role_sw);
+		goto err_fwnode_put;
+	}
+
+	typec_cap.revision = USB_TYPEC_REV_1_2;
+	typec_cap.pd_revision = 0x200;
+	typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
+	typec_cap.driver_data = tps;
+	typec_cap.ops = &tps6598x_ops;
+	typec_cap.fwnode = fwnode;
+
+	switch (TPS_SYSCONF_PORTINFO(conf)) {
+	case TPS_PORTINFO_SINK_ACCESSORY:
+	case TPS_PORTINFO_SINK:
+		typec_cap.type = TYPEC_PORT_SNK;
+		typec_cap.data = TYPEC_PORT_UFP;
+		break;
+	case TPS_PORTINFO_DRP_UFP_DRD:
+	case TPS_PORTINFO_DRP_DFP_DRD:
+		typec_cap.type = TYPEC_PORT_DRP;
+		typec_cap.data = TYPEC_PORT_DRD;
+		break;
+	case TPS_PORTINFO_DRP_UFP:
+		typec_cap.type = TYPEC_PORT_DRP;
+		typec_cap.data = TYPEC_PORT_UFP;
+		break;
+	case TPS_PORTINFO_DRP_DFP:
+		typec_cap.type = TYPEC_PORT_DRP;
+		typec_cap.data = TYPEC_PORT_DFP;
+		break;
+	case TPS_PORTINFO_SOURCE:
+		typec_cap.type = TYPEC_PORT_SRC;
+		typec_cap.data = TYPEC_PORT_DFP;
+		break;
+	default:
+		ret = -ENODEV;
+		goto err_role_put;
+	}
+
+	ret = devm_tps6598_psy_register(tps);
+	if (ret)
+		goto err_role_put;
+
+	tps->port = typec_register_port(&client->dev, &typec_cap);
+	if (IS_ERR(tps->port)) {
+		ret = PTR_ERR(tps->port);
+		goto err_role_put;
+	}
+
+	if (status & TPS_STATUS_PLUG_PRESENT) {
+		ret = tps6598x_read16(tps, TPS_REG_POWER_STATUS, &tps->pwr_status);
+		if (ret < 0) {
+			dev_err(tps->dev, "failed to read power status: %d\n", ret);
+			goto err_unregister_port;
+		}
+		ret = tps6598x_connect(tps, status);
+		if (ret)
+			dev_err(&client->dev, "failed to register partner\n");
+	}
+
+	ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					irq_handler,
+					IRQF_SHARED | IRQF_ONESHOT,
+					dev_name(&client->dev), tps);
+	if (ret) {
+		tps6598x_disconnect(tps, 0);
+		goto err_unregister_port;
+	}
+
+	i2c_set_clientdata(client, tps);
+	fwnode_handle_put(fwnode);
+
+	return 0;
+
+err_unregister_port:
+	typec_unregister_port(tps->port);
+err_role_put:
+	usb_role_switch_put(tps->role_sw);
+err_fwnode_put:
+	fwnode_handle_put(fwnode);
+err_clear_mask:
+	tps6598x_write64(tps, TPS_REG_INT_MASK1, 0);
+	return ret;
+}
+
+static void tps6598x_remove(struct i2c_client *client)
+{
+	struct tps6598x *tps = i2c_get_clientdata(client);
+
+	tps6598x_disconnect(tps, 0);
+	typec_unregister_port(tps->port);
+	usb_role_switch_put(tps->role_sw);
+}
+
+static const struct of_device_id tps6598x_of_match[] = {
+	{ .compatible = "ti,tps6598x", },
+	{ .compatible = "apple,cd321x", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, tps6598x_of_match);
+
+static const struct i2c_device_id tps6598x_id[] = {
+	{ "tps6598x" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tps6598x_id);
+
+static struct i2c_driver tps6598x_i2c_driver = {
+	.driver = {
+		.name = "tps6598x",
+		.of_match_table = tps6598x_of_match,
+	},
+	.probe_new = tps6598x_probe,
+	.remove = tps6598x_remove,
+	.id_table = tps6598x_id,
+};
+module_i2c_driver(tps6598x_i2c_driver);
+
+MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TI TPS6598x USB Power Delivery Controller Driver");
diff --git a/drivers/usb/typec/tipd/tps6598x.h b/drivers/usb/typec/tipd/tps6598x.h
new file mode 100644
index 000000000..527857549
--- /dev/null
+++ b/drivers/usb/typec/tipd/tps6598x.h
@@ -0,0 +1,202 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Driver for TI TPS6598x USB Power Delivery controller family
+ *
+ * Copyright (C) 2017, Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+
+#ifndef __TPS6598X_H__
+#define __TPS6598X_H__
+
+#define TPS_FIELD_GET(_mask, _reg) ((typeof(_mask))(((_reg) & (_mask)) >> __bf_shf(_mask)))
+
+/* TPS_REG_STATUS bits */
+#define TPS_STATUS_PLUG_PRESENT		BIT(0)
+#define TPS_STATUS_PLUG_UPSIDE_DOWN	BIT(4)
+#define TPS_STATUS_TO_UPSIDE_DOWN(s)	(!!((s) & TPS_STATUS_PLUG_UPSIDE_DOWN))
+#define TPS_STATUS_PORTROLE		BIT(5)
+#define TPS_STATUS_TO_TYPEC_PORTROLE(s) (!!((s) & TPS_STATUS_PORTROLE))
+#define TPS_STATUS_DATAROLE		BIT(6)
+#define TPS_STATUS_TO_TYPEC_DATAROLE(s)	(!!((s) & TPS_STATUS_DATAROLE))
+#define TPS_STATUS_VCONN		BIT(7)
+#define TPS_STATUS_TO_TYPEC_VCONN(s)	(!!((s) & TPS_STATUS_VCONN))
+#define TPS_STATUS_OVERCURRENT		BIT(16)
+#define TPS_STATUS_GOTO_MIN_ACTIVE	BIT(26)
+#define TPS_STATUS_BIST			BIT(27)
+#define TPS_STATUS_HIGH_VOLAGE_WARNING	BIT(28)
+#define TPS_STATUS_HIGH_LOW_VOLTAGE_WARNING BIT(29)
+
+#define TPS_STATUS_CONN_STATE_MASK		GENMASK(3, 1)
+#define TPS_STATUS_CONN_STATE(x)		TPS_FIELD_GET(TPS_STATUS_CONN_STATE_MASK, (x))
+#define TPS_STATUS_PP_5V0_SWITCH_MASK		GENMASK(9, 8)
+#define TPS_STATUS_PP_5V0_SWITCH(x)		TPS_FIELD_GET(TPS_STATUS_PP_5V0_SWITCH_MASK, (x))
+#define TPS_STATUS_PP_HV_SWITCH_MASK		GENMASK(11, 10)
+#define TPS_STATUS_PP_HV_SWITCH(x)		TPS_FIELD_GET(TPS_STATUS_PP_HV_SWITCH_MASK, (x))
+#define TPS_STATUS_PP_EXT_SWITCH_MASK		GENMASK(13, 12)
+#define TPS_STATUS_PP_EXT_SWITCH(x)		TPS_FIELD_GET(TPS_STATUS_PP_EXT_SWITCH_MASK, (x))
+#define TPS_STATUS_PP_CABLE_SWITCH_MASK		GENMASK(15, 14)
+#define TPS_STATUS_PP_CABLE_SWITCH(x)		TPS_FIELD_GET(TPS_STATUS_PP_CABLE_SWITCH_MASK, (x))
+#define TPS_STATUS_POWER_SOURCE_MASK		GENMASK(19, 18)
+#define TPS_STATUS_POWER_SOURCE(x)		TPS_FIELD_GET(TPS_STATUS_POWER_SOURCE_MASK, (x))
+#define TPS_STATUS_VBUS_STATUS_MASK		GENMASK(21, 20)
+#define TPS_STATUS_VBUS_STATUS(x)		TPS_FIELD_GET(TPS_STATUS_VBUS_STATUS_MASK, (x))
+#define TPS_STATUS_USB_HOST_PRESENT_MASK	GENMASK(23, 22)
+#define TPS_STATUS_USB_HOST_PRESENT(x)		TPS_FIELD_GET(TPS_STATUS_USB_HOST_PRESENT_MASK, (x))
+#define TPS_STATUS_LEGACY_MASK			GENMASK(25, 24)
+#define TPS_STATUS_LEGACY(x)			TPS_FIELD_GET(TPS_STATUS_LEGACY_MASK, (x))
+
+#define TPS_STATUS_CONN_STATE_NO_CONN		0
+#define TPS_STATUS_CONN_STATE_DISABLED		1
+#define TPS_STATUS_CONN_STATE_AUDIO_CONN	2
+#define TPS_STATUS_CONN_STATE_DEBUG_CONN	3
+#define TPS_STATUS_CONN_STATE_NO_CONN_R_A	4
+#define TPS_STATUS_CONN_STATE_RESERVED		5
+#define TPS_STATUS_CONN_STATE_CONN_NO_R_A	6
+#define TPS_STATUS_CONN_STATE_CONN_WITH_R_A	7
+
+#define TPS_STATUS_PP_SWITCH_STATE_DISABLED	0
+#define TPS_STATUS_PP_SWITCH_STATE_FAULT	1
+#define TPS_STATUS_PP_SWITCH_STATE_OUT		2
+#define TPS_STATUS_PP_SWITCH_STATE_IN		3
+
+#define TPS_STATUS_POWER_SOURCE_UNKNOWN		0
+#define TPS_STATUS_POWER_SOURCE_VIN_3P3		1
+#define TPS_STATUS_POWER_SOURCE_DEAD_BAT	2
+#define TPS_STATUS_POWER_SOURCE_VBUS		3
+
+#define TPS_STATUS_VBUS_STATUS_VSAFE0V		0
+#define TPS_STATUS_VBUS_STATUS_VSAFE5V		1
+#define TPS_STATUS_VBUS_STATUS_PD		2
+#define TPS_STATUS_VBUS_STATUS_FAULT		3
+
+#define TPS_STATUS_USB_HOST_PRESENT_NO		0
+#define TPS_STATUS_USB_HOST_PRESENT_PD_NO_USB	1
+#define TPS_STATUS_USB_HOST_PRESENT_NO_PD	2
+#define TPS_STATUS_USB_HOST_PRESENT_PD_USB	3
+
+#define TPS_STATUS_LEGACY_NO			0
+#define TPS_STATUS_LEGACY_SINK			1
+#define TPS_STATUS_LEGACY_SOURCE		2
+
+/* TPS_REG_INT_* bits */
+#define TPS_REG_INT_USER_VID_ALT_MODE_OTHER_VDM		BIT_ULL(27+32)
+#define TPS_REG_INT_USER_VID_ALT_MODE_ATTN_VDM		BIT_ULL(26+32)
+#define TPS_REG_INT_USER_VID_ALT_MODE_EXIT		BIT_ULL(25+32)
+#define TPS_REG_INT_USER_VID_ALT_MODE_ENTERED		BIT_ULL(24+32)
+#define TPS_REG_INT_EXIT_MODES_COMPLETE			BIT_ULL(20+32)
+#define TPS_REG_INT_DISCOVER_MODES_COMPLETE		BIT_ULL(19+32)
+#define TPS_REG_INT_VDM_MSG_SENT			BIT_ULL(18+32)
+#define TPS_REG_INT_VDM_ENTERED_MODE			BIT_ULL(17+32)
+#define TPS_REG_INT_ERROR_UNABLE_TO_SOURCE		BIT_ULL(14+32)
+#define TPS_REG_INT_SRC_TRANSITION			BIT_ULL(10+32)
+#define TPS_REG_INT_ERROR_DISCHARGE_FAILED		BIT_ULL(9+32)
+#define TPS_REG_INT_ERROR_MESSAGE_DATA			BIT_ULL(7+32)
+#define TPS_REG_INT_ERROR_PROTOCOL_ERROR		BIT_ULL(6+32)
+#define TPS_REG_INT_ERROR_MISSING_GET_CAP_MESSAGE	BIT_ULL(4+32)
+#define TPS_REG_INT_ERROR_POWER_EVENT_OCCURRED		BIT_ULL(3+32)
+#define TPS_REG_INT_ERROR_CAN_PROVIDE_PWR_LATER		BIT_ULL(2+32)
+#define TPS_REG_INT_ERROR_CANNOT_PROVIDE_PWR		BIT_ULL(1+32)
+#define TPS_REG_INT_ERROR_DEVICE_INCOMPATIBLE		BIT_ULL(0+32)
+#define TPS_REG_INT_CMD2_COMPLETE			BIT(31)
+#define TPS_REG_INT_CMD1_COMPLETE			BIT(30)
+#define TPS_REG_INT_ADC_HIGH_THRESHOLD			BIT(29)
+#define TPS_REG_INT_ADC_LOW_THRESHOLD			BIT(28)
+#define TPS_REG_INT_PD_STATUS_UPDATE			BIT(27)
+#define TPS_REG_INT_STATUS_UPDATE			BIT(26)
+#define TPS_REG_INT_DATA_STATUS_UPDATE			BIT(25)
+#define TPS_REG_INT_POWER_STATUS_UPDATE			BIT(24)
+#define TPS_REG_INT_PP_SWITCH_CHANGED			BIT(23)
+#define TPS_REG_INT_HIGH_VOLTAGE_WARNING		BIT(22)
+#define TPS_REG_INT_USB_HOST_PRESENT_NO_LONGER		BIT(21)
+#define TPS_REG_INT_USB_HOST_PRESENT			BIT(20)
+#define TPS_REG_INT_GOTO_MIN_RECEIVED			BIT(19)
+#define TPS_REG_INT_PR_SWAP_REQUESTED			BIT(17)
+#define TPS_REG_INT_SINK_CAP_MESSAGE_READY		BIT(15)
+#define TPS_REG_INT_SOURCE_CAP_MESSAGE_READY		BIT(14)
+#define TPS_REG_INT_NEW_CONTRACT_AS_PROVIDER		BIT(13)
+#define TPS_REG_INT_NEW_CONTRACT_AS_CONSUMER		BIT(12)
+#define TPS_REG_INT_VDM_RECEIVED			BIT(11)
+#define TPS_REG_INT_ATTENTION_RECEIVED			BIT(10)
+#define TPS_REG_INT_OVERCURRENT				BIT(9)
+#define TPS_REG_INT_BIST				BIT(8)
+#define TPS_REG_INT_RDO_RECEIVED_FROM_SINK		BIT(7)
+#define TPS_REG_INT_DR_SWAP_COMPLETE			BIT(5)
+#define TPS_REG_INT_PR_SWAP_COMPLETE			BIT(4)
+#define TPS_REG_INT_PLUG_EVENT				BIT(3)
+#define TPS_REG_INT_HARD_RESET				BIT(1)
+#define TPS_REG_INT_PD_SOFT_RESET			BIT(0)
+
+/* Apple-specific TPS_REG_INT_* bits */
+#define APPLE_CD_REG_INT_DATA_STATUS_UPDATE		BIT(10)
+#define APPLE_CD_REG_INT_POWER_STATUS_UPDATE		BIT(9)
+#define APPLE_CD_REG_INT_STATUS_UPDATE			BIT(8)
+#define APPLE_CD_REG_INT_PLUG_EVENT			BIT(1)
+
+/* TPS_REG_SYSTEM_POWER_STATE states */
+#define TPS_SYSTEM_POWER_STATE_S0	0x00
+#define TPS_SYSTEM_POWER_STATE_S3	0x03
+#define TPS_SYSTEM_POWER_STATE_S4	0x04
+#define TPS_SYSTEM_POWER_STATE_S5	0x05
+
+/* TPS_REG_POWER_STATUS bits */
+#define TPS_POWER_STATUS_CONNECTION(x)  TPS_FIELD_GET(BIT(0), (x))
+#define TPS_POWER_STATUS_SOURCESINK(x)	TPS_FIELD_GET(BIT(1), (x))
+#define TPS_POWER_STATUS_BC12_DET(x)	TPS_FIELD_GET(BIT(2), (x))
+
+#define TPS_POWER_STATUS_TYPEC_CURRENT_MASK GENMASK(3, 2)
+#define TPS_POWER_STATUS_PWROPMODE(p)	    TPS_FIELD_GET(TPS_POWER_STATUS_TYPEC_CURRENT_MASK, (p))
+#define TPS_POWER_STATUS_BC12_STATUS_MASK   GENMASK(6, 5)
+#define TPS_POWER_STATUS_BC12_STATUS(p)	    TPS_FIELD_GET(TPS_POWER_STATUS_BC12_STATUS_MASK, (p))
+
+#define TPS_POWER_STATUS_TYPEC_CURRENT_USB     0
+#define TPS_POWER_STATUS_TYPEC_CURRENT_1A5     1
+#define TPS_POWER_STATUS_TYPEC_CURRENT_3A0     2
+#define TPS_POWER_STATUS_TYPEC_CURRENT_PD      3
+
+#define TPS_POWER_STATUS_BC12_STATUS_SDP 0
+#define TPS_POWER_STATUS_BC12_STATUS_CDP 2
+#define TPS_POWER_STATUS_BC12_STATUS_DCP 3
+
+/* TPS_REG_DATA_STATUS bits */
+#define TPS_DATA_STATUS_DATA_CONNECTION	     BIT(0)
+#define TPS_DATA_STATUS_UPSIDE_DOWN	     BIT(1)
+#define TPS_DATA_STATUS_ACTIVE_CABLE	     BIT(2)
+#define TPS_DATA_STATUS_USB2_CONNECTION	     BIT(4)
+#define TPS_DATA_STATUS_USB3_CONNECTION	     BIT(5)
+#define TPS_DATA_STATUS_USB3_GEN2	     BIT(6)
+#define TPS_DATA_STATUS_USB_DATA_ROLE	     BIT(7)
+#define TPS_DATA_STATUS_DP_CONNECTION	     BIT(8)
+#define TPS_DATA_STATUS_DP_SINK		     BIT(9)
+#define TPS_DATA_STATUS_TBT_CONNECTION	     BIT(16)
+#define TPS_DATA_STATUS_TBT_TYPE	     BIT(17)
+#define TPS_DATA_STATUS_OPTICAL_CABLE	     BIT(18)
+#define TPS_DATA_STATUS_ACTIVE_LINK_TRAIN    BIT(20)
+#define TPS_DATA_STATUS_FORCE_LSX	     BIT(23)
+#define TPS_DATA_STATUS_POWER_MISMATCH	     BIT(24)
+
+#define TPS_DATA_STATUS_DP_PIN_ASSIGNMENT_MASK GENMASK(11, 10)
+#define TPS_DATA_STATUS_DP_PIN_ASSIGNMENT(x) \
+	TPS_FIELD_GET(TPS_DATA_STATUS_DP_PIN_ASSIGNMENT_MASK, (x))
+#define TPS_DATA_STATUS_TBT_CABLE_SPEED_MASK   GENMASK(27, 25)
+#define TPS_DATA_STATUS_TBT_CABLE_SPEED \
+	TPS_FIELD_GET(TPS_DATA_STATUS_TBT_CABLE_SPEED_MASK, (x))
+#define TPS_DATA_STATUS_TBT_CABLE_GEN_MASK     GENMASK(29, 28)
+#define TPS_DATA_STATUS_TBT_CABLE_GEN \
+	TPS_FIELD_GET(TPS_DATA_STATUS_TBT_CABLE_GEN_MASK, (x))
+
+/* Map data status to DP spec assignments */
+#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT(x) \
+	((TPS_DATA_STATUS_DP_PIN_ASSIGNMENT(x) << 1) | \
+		TPS_FIELD_GET(TPS_DATA_STATUS_USB3_CONNECTION, (x)))
+#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_E    0
+#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_F    BIT(0)
+#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_C    BIT(1)
+#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_D    (BIT(1) | BIT(0))
+#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_A    BIT(2)
+#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_B    (BIT(2) | BIT(1))
+
+#endif /* __TPS6598X_H__ */
diff --git a/drivers/usb/typec/tipd/trace.c b/drivers/usb/typec/tipd/trace.c
new file mode 100644
index 000000000..016e68048
--- /dev/null
+++ b/drivers/usb/typec/tipd/trace.c
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI TPS6598x USB Power Delivery Controller Trace Support
+ *
+ * Copyright (C) 2021, Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+#define CREATE_TRACE_POINTS
+#include "trace.h"
diff --git a/drivers/usb/typec/tipd/trace.h b/drivers/usb/typec/tipd/trace.h
new file mode 100644
index 000000000..12cad1bde
--- /dev/null
+++ b/drivers/usb/typec/tipd/trace.h
@@ -0,0 +1,306 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Driver for TI TPS6598x USB Power Delivery controller family
+ *
+ * Copyright (C) 2020 Purism SPC
+ * Author: Guido Günther <agx@sigxcpu.org>
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM tps6598x
+
+#if !defined(_TPS6598X_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
+#define _TPS6598X_TRACE_H_
+
+#include "tps6598x.h"
+
+#include <linux/stringify.h>
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+
+#define show_irq_flags(flags) \
+	__print_flags_u64(flags, "|", \
+		{ TPS_REG_INT_PD_SOFT_RESET,			"PD_SOFT_RESET" }, \
+		{ TPS_REG_INT_HARD_RESET,			"HARD_RESET" }, \
+		{ TPS_REG_INT_PLUG_EVENT,			"PLUG_EVENT" }, \
+		{ TPS_REG_INT_PR_SWAP_COMPLETE,			"PR_SWAP_COMPLETE" }, \
+		{ TPS_REG_INT_DR_SWAP_COMPLETE,			"DR_SWAP_COMPLETE" }, \
+		{ TPS_REG_INT_RDO_RECEIVED_FROM_SINK,		"RDO_RECEIVED_FROM_SINK" }, \
+		{ TPS_REG_INT_BIST,				"BIST" }, \
+		{ TPS_REG_INT_OVERCURRENT,			"OVERCURRENT" }, \
+		{ TPS_REG_INT_ATTENTION_RECEIVED,		"ATTENTION_RECEIVED" }, \
+		{ TPS_REG_INT_VDM_RECEIVED,			"VDM_RECEIVED" }, \
+		{ TPS_REG_INT_NEW_CONTRACT_AS_CONSUMER,		"NEW_CONTRACT_AS_CONSUMER" }, \
+		{ TPS_REG_INT_NEW_CONTRACT_AS_PROVIDER,		"NEW_CONTRACT_AS_PROVIDER" }, \
+		{ TPS_REG_INT_SOURCE_CAP_MESSAGE_READY,		"SOURCE_CAP_MESSAGE_READY" }, \
+		{ TPS_REG_INT_SINK_CAP_MESSAGE_READY,		"SINK_CAP_MESSAGE_READY" }, \
+		{ TPS_REG_INT_PR_SWAP_REQUESTED,		"PR_SWAP_REQUESTED" }, \
+		{ TPS_REG_INT_GOTO_MIN_RECEIVED,		"GOTO_MIN_RECEIVED" }, \
+		{ TPS_REG_INT_USB_HOST_PRESENT,			"USB_HOST_PRESENT" }, \
+		{ TPS_REG_INT_USB_HOST_PRESENT_NO_LONGER,	"USB_HOST_PRESENT_NO_LONGER" }, \
+		{ TPS_REG_INT_HIGH_VOLTAGE_WARNING,		"HIGH_VOLTAGE_WARNING" }, \
+		{ TPS_REG_INT_PP_SWITCH_CHANGED,		"PP_SWITCH_CHANGED" }, \
+		{ TPS_REG_INT_POWER_STATUS_UPDATE,		"POWER_STATUS_UPDATE" }, \
+		{ TPS_REG_INT_DATA_STATUS_UPDATE,		"DATA_STATUS_UPDATE" }, \
+		{ TPS_REG_INT_STATUS_UPDATE,			"STATUS_UPDATE" }, \
+		{ TPS_REG_INT_PD_STATUS_UPDATE,			"PD_STATUS_UPDATE" }, \
+		{ TPS_REG_INT_ADC_LOW_THRESHOLD,		"ADC_LOW_THRESHOLD" }, \
+		{ TPS_REG_INT_ADC_HIGH_THRESHOLD,		"ADC_HIGH_THRESHOLD" }, \
+		{ TPS_REG_INT_CMD1_COMPLETE,			"CMD1_COMPLETE" }, \
+		{ TPS_REG_INT_CMD2_COMPLETE,			"CMD2_COMPLETE" }, \
+		{ TPS_REG_INT_ERROR_DEVICE_INCOMPATIBLE,	"ERROR_DEVICE_INCOMPATIBLE" }, \
+		{ TPS_REG_INT_ERROR_CANNOT_PROVIDE_PWR,		"ERROR_CANNOT_PROVIDE_PWR" }, \
+		{ TPS_REG_INT_ERROR_CAN_PROVIDE_PWR_LATER,	"ERROR_CAN_PROVIDE_PWR_LATER" }, \
+		{ TPS_REG_INT_ERROR_POWER_EVENT_OCCURRED,	"ERROR_POWER_EVENT_OCCURRED" }, \
+		{ TPS_REG_INT_ERROR_MISSING_GET_CAP_MESSAGE,	"ERROR_MISSING_GET_CAP_MESSAGE" }, \
+		{ TPS_REG_INT_ERROR_PROTOCOL_ERROR,		"ERROR_PROTOCOL_ERROR" }, \
+		{ TPS_REG_INT_ERROR_MESSAGE_DATA,		"ERROR_MESSAGE_DATA" }, \
+		{ TPS_REG_INT_ERROR_DISCHARGE_FAILED,		"ERROR_DISCHARGE_FAILED" }, \
+		{ TPS_REG_INT_SRC_TRANSITION,			"SRC_TRANSITION" }, \
+		{ TPS_REG_INT_ERROR_UNABLE_TO_SOURCE,		"ERROR_UNABLE_TO_SOURCE" }, \
+		{ TPS_REG_INT_VDM_ENTERED_MODE,			"VDM_ENTERED_MODE" }, \
+		{ TPS_REG_INT_VDM_MSG_SENT,			"VDM_MSG_SENT" }, \
+		{ TPS_REG_INT_DISCOVER_MODES_COMPLETE,		"DISCOVER_MODES_COMPLETE" }, \
+		{ TPS_REG_INT_EXIT_MODES_COMPLETE,		"EXIT_MODES_COMPLETE" }, \
+		{ TPS_REG_INT_USER_VID_ALT_MODE_ENTERED,	"USER_VID_ALT_MODE_ENTERED" }, \
+		{ TPS_REG_INT_USER_VID_ALT_MODE_EXIT,		"USER_VID_ALT_MODE_EXIT" }, \
+		{ TPS_REG_INT_USER_VID_ALT_MODE_ATTN_VDM,	"USER_VID_ALT_MODE_ATTN_VDM" }, \
+		{ TPS_REG_INT_USER_VID_ALT_MODE_OTHER_VDM,	"USER_VID_ALT_MODE_OTHER_VDM" })
+
+#define show_cd321x_irq_flags(flags) \
+	__print_flags_u64(flags, "|", \
+		{ APPLE_CD_REG_INT_PLUG_EVENT,			"PLUG_EVENT" }, \
+		{ APPLE_CD_REG_INT_POWER_STATUS_UPDATE,		"POWER_STATUS_UPDATE" }, \
+		{ APPLE_CD_REG_INT_DATA_STATUS_UPDATE,		"DATA_STATUS_UPDATE" }, \
+		{ APPLE_CD_REG_INT_STATUS_UPDATE,		"STATUS_UPDATE" })
+
+#define TPS6598X_STATUS_FLAGS_MASK (GENMASK(31, 0) ^ (TPS_STATUS_CONN_STATE_MASK | \
+						      TPS_STATUS_PP_5V0_SWITCH_MASK | \
+						      TPS_STATUS_PP_HV_SWITCH_MASK | \
+						      TPS_STATUS_PP_EXT_SWITCH_MASK | \
+						      TPS_STATUS_PP_CABLE_SWITCH_MASK | \
+						      TPS_STATUS_POWER_SOURCE_MASK | \
+						      TPS_STATUS_VBUS_STATUS_MASK | \
+						      TPS_STATUS_USB_HOST_PRESENT_MASK | \
+						      TPS_STATUS_LEGACY_MASK))
+
+#define show_status_conn_state(status) \
+	__print_symbolic(TPS_STATUS_CONN_STATE((status)), \
+		{ TPS_STATUS_CONN_STATE_CONN_WITH_R_A,	"conn-Ra"  }, \
+		{ TPS_STATUS_CONN_STATE_CONN_NO_R_A,	"conn-no-Ra" }, \
+		{ TPS_STATUS_CONN_STATE_NO_CONN_R_A,	"no-conn-Ra" },	\
+		{ TPS_STATUS_CONN_STATE_DEBUG_CONN,	"debug"	 }, \
+		{ TPS_STATUS_CONN_STATE_AUDIO_CONN,	"audio"	 }, \
+		{ TPS_STATUS_CONN_STATE_DISABLED,	"disabled" }, \
+		{ TPS_STATUS_CONN_STATE_NO_CONN,	"no-conn" })
+
+#define show_status_pp_switch_state(status) \
+	__print_symbolic(status, \
+		{ TPS_STATUS_PP_SWITCH_STATE_IN,	"in" }, \
+		{ TPS_STATUS_PP_SWITCH_STATE_OUT,	"out" }, \
+		{ TPS_STATUS_PP_SWITCH_STATE_FAULT,	"fault" }, \
+		{ TPS_STATUS_PP_SWITCH_STATE_DISABLED,	"off" })
+
+#define show_status_power_sources(status) \
+	__print_symbolic(TPS_STATUS_POWER_SOURCE(status), \
+		{ TPS_STATUS_POWER_SOURCE_VBUS,		"vbus" }, \
+		{ TPS_STATUS_POWER_SOURCE_VIN_3P3,	"vin-3p3" }, \
+		{ TPS_STATUS_POWER_SOURCE_DEAD_BAT,	"dead-battery" }, \
+		{ TPS_STATUS_POWER_SOURCE_UNKNOWN,	"unknown" })
+
+#define show_status_vbus_status(status) \
+	__print_symbolic(TPS_STATUS_VBUS_STATUS(status), \
+		{ TPS_STATUS_VBUS_STATUS_VSAFE0V,	"vSafe0V" }, \
+		{ TPS_STATUS_VBUS_STATUS_VSAFE5V,	"vSafe5V" }, \
+		{ TPS_STATUS_VBUS_STATUS_PD,		"pd" }, \
+		{ TPS_STATUS_VBUS_STATUS_FAULT,		"fault" })
+
+#define show_status_usb_host_present(status) \
+	__print_symbolic(TPS_STATUS_USB_HOST_PRESENT(status), \
+		{ TPS_STATUS_USB_HOST_PRESENT_PD_USB,	 "pd-usb" }, \
+		{ TPS_STATUS_USB_HOST_PRESENT_NO_PD,	 "no-pd" }, \
+		{ TPS_STATUS_USB_HOST_PRESENT_PD_NO_USB, "pd-no-usb" }, \
+		{ TPS_STATUS_USB_HOST_PRESENT_NO,	 "no" })
+
+#define show_status_legacy(status) \
+	__print_symbolic(TPS_STATUS_LEGACY(status),	     \
+		{ TPS_STATUS_LEGACY_SOURCE,		 "source" }, \
+		{ TPS_STATUS_LEGACY_SINK,		 "sink" }, \
+		{ TPS_STATUS_LEGACY_NO,			 "no" })
+
+#define show_status_flags(flags) \
+	__print_flags((flags & TPS6598X_STATUS_FLAGS_MASK), "|", \
+		      { TPS_STATUS_PLUG_PRESENT,	"PLUG_PRESENT" }, \
+		      { TPS_STATUS_PLUG_UPSIDE_DOWN,	"UPSIDE_DOWN" }, \
+		      { TPS_STATUS_PORTROLE,		"PORTROLE" }, \
+		      { TPS_STATUS_DATAROLE,		"DATAROLE" }, \
+		      { TPS_STATUS_VCONN,		"VCONN" }, \
+		      { TPS_STATUS_OVERCURRENT,		"OVERCURRENT" }, \
+		      { TPS_STATUS_GOTO_MIN_ACTIVE,	"GOTO_MIN_ACTIVE" }, \
+		      { TPS_STATUS_BIST,		"BIST" }, \
+		      { TPS_STATUS_HIGH_VOLAGE_WARNING,	"HIGH_VOLAGE_WARNING" }, \
+		      { TPS_STATUS_HIGH_LOW_VOLTAGE_WARNING, "HIGH_LOW_VOLTAGE_WARNING" })
+
+#define show_power_status_source_sink(power_status) \
+	__print_symbolic(TPS_POWER_STATUS_SOURCESINK(power_status), \
+		{ 1, "sink" }, \
+		{ 0, "source" })
+
+#define show_power_status_typec_status(power_status) \
+	__print_symbolic(TPS_POWER_STATUS_PWROPMODE(power_status), \
+		{ TPS_POWER_STATUS_TYPEC_CURRENT_PD,  "pd" }, \
+		{ TPS_POWER_STATUS_TYPEC_CURRENT_3A0, "3.0A" }, \
+		{ TPS_POWER_STATUS_TYPEC_CURRENT_1A5, "1.5A" }, \
+		{ TPS_POWER_STATUS_TYPEC_CURRENT_USB, "usb" })
+
+#define show_power_status_bc12_status(power_status) \
+	__print_symbolic(TPS_POWER_STATUS_BC12_STATUS(power_status), \
+		{ TPS_POWER_STATUS_BC12_STATUS_DCP, "dcp" }, \
+		{ TPS_POWER_STATUS_BC12_STATUS_CDP, "cdp" }, \
+		{ TPS_POWER_STATUS_BC12_STATUS_SDP, "sdp" })
+
+#define TPS_DATA_STATUS_FLAGS_MASK (GENMASK(31, 0) ^ (TPS_DATA_STATUS_DP_PIN_ASSIGNMENT_MASK | \
+						      TPS_DATA_STATUS_TBT_CABLE_SPEED_MASK | \
+						      TPS_DATA_STATUS_TBT_CABLE_GEN_MASK))
+
+#define show_data_status_flags(data_status) \
+	__print_flags(data_status & TPS_DATA_STATUS_FLAGS_MASK, "|", \
+		{ TPS_DATA_STATUS_DATA_CONNECTION,	"DATA_CONNECTION" }, \
+		{ TPS_DATA_STATUS_UPSIDE_DOWN,		"DATA_UPSIDE_DOWN" }, \
+		{ TPS_DATA_STATUS_ACTIVE_CABLE,		"ACTIVE_CABLE" }, \
+		{ TPS_DATA_STATUS_USB2_CONNECTION,	"USB2_CONNECTION" }, \
+		{ TPS_DATA_STATUS_USB3_CONNECTION,	"USB3_CONNECTION" }, \
+		{ TPS_DATA_STATUS_USB3_GEN2,		"USB3_GEN2" }, \
+		{ TPS_DATA_STATUS_USB_DATA_ROLE,	"USB_DATA_ROLE" }, \
+		{ TPS_DATA_STATUS_DP_CONNECTION,	"DP_CONNECTION" }, \
+		{ TPS_DATA_STATUS_DP_SINK,		"DP_SINK" }, \
+		{ TPS_DATA_STATUS_TBT_CONNECTION,	"TBT_CONNECTION" }, \
+		{ TPS_DATA_STATUS_TBT_TYPE,		"TBT_TYPE" }, \
+		{ TPS_DATA_STATUS_OPTICAL_CABLE,	"OPTICAL_CABLE" }, \
+		{ TPS_DATA_STATUS_ACTIVE_LINK_TRAIN,	"ACTIVE_LINK_TRAIN" }, \
+		{ TPS_DATA_STATUS_FORCE_LSX,		"FORCE_LSX" }, \
+		{ TPS_DATA_STATUS_POWER_MISMATCH,	"POWER_MISMATCH" })
+
+#define show_data_status_dp_pin_assignment(data_status) \
+	__print_symbolic(TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT(data_status), \
+		{ TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_E, "E" }, \
+		{ TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_F, "F" }, \
+		{ TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_C, "C" }, \
+		{ TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_D, "D" }, \
+		{ TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_A, "A" }, \
+		{ TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_B, "B" })
+
+#define maybe_show_data_status_dp_pin_assignment(data_status) \
+	(data_status & TPS_DATA_STATUS_DP_CONNECTION ? \
+	 show_data_status_dp_pin_assignment(data_status) : "")
+
+TRACE_EVENT(tps6598x_irq,
+	    TP_PROTO(u64 event1,
+		     u64 event2),
+	    TP_ARGS(event1, event2),
+
+	    TP_STRUCT__entry(
+			     __field(u64, event1)
+			     __field(u64, event2)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->event1 = event1;
+			   __entry->event2 = event2;
+			   ),
+
+	    TP_printk("event1=%s, event2=%s",
+		      show_irq_flags(__entry->event1),
+		      show_irq_flags(__entry->event2))
+);
+
+TRACE_EVENT(cd321x_irq,
+	    TP_PROTO(u64 event),
+	    TP_ARGS(event),
+
+	    TP_STRUCT__entry(
+			     __field(u64, event)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->event = event;
+			   ),
+
+	    TP_printk("event=%s",
+		      show_cd321x_irq_flags(__entry->event))
+);
+
+TRACE_EVENT(tps6598x_status,
+	    TP_PROTO(u32 status),
+	    TP_ARGS(status),
+
+	    TP_STRUCT__entry(
+			     __field(u32, status)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->status = status;
+			   ),
+
+	    TP_printk("conn: %s, pp_5v0: %s, pp_hv: %s, pp_ext: %s, pp_cable: %s, "
+		      "pwr-src: %s, vbus: %s, usb-host: %s, legacy: %s, flags: %s",
+		      show_status_conn_state(__entry->status),
+		      show_status_pp_switch_state(TPS_STATUS_PP_5V0_SWITCH(__entry->status)),
+		      show_status_pp_switch_state(TPS_STATUS_PP_HV_SWITCH(__entry->status)),
+		      show_status_pp_switch_state(TPS_STATUS_PP_EXT_SWITCH(__entry->status)),
+		      show_status_pp_switch_state(TPS_STATUS_PP_CABLE_SWITCH(__entry->status)),
+		      show_status_power_sources(__entry->status),
+		      show_status_vbus_status(__entry->status),
+		      show_status_usb_host_present(__entry->status),
+		      show_status_legacy(__entry->status),
+		      show_status_flags(__entry->status)
+		    )
+);
+
+TRACE_EVENT(tps6598x_power_status,
+	    TP_PROTO(u16 power_status),
+	    TP_ARGS(power_status),
+
+	    TP_STRUCT__entry(
+			     __field(u16, power_status)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->power_status = power_status;
+			   ),
+
+	    TP_printk("conn: %d, pwr-role: %s, typec: %s, bc: %s",
+		      !!TPS_POWER_STATUS_CONNECTION(__entry->power_status),
+		      show_power_status_source_sink(__entry->power_status),
+		      show_power_status_typec_status(__entry->power_status),
+		      show_power_status_bc12_status(__entry->power_status)
+		    )
+);
+
+TRACE_EVENT(tps6598x_data_status,
+	    TP_PROTO(u32 data_status),
+	    TP_ARGS(data_status),
+
+	    TP_STRUCT__entry(
+			     __field(u32, data_status)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->data_status = data_status;
+			   ),
+
+	    TP_printk("%s%s%s",
+		      show_data_status_flags(__entry->data_status),
+		      __entry->data_status & TPS_DATA_STATUS_DP_CONNECTION ? ", DP pinout " : "",
+		      maybe_show_data_status_dp_pin_assignment(__entry->data_status)
+		    )
+);
+
+#endif /* _TPS6598X_TRACE_H_ */
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#include <trace/define_trace.h>
diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig
new file mode 100644
index 000000000..8f9c4b9f3
--- /dev/null
+++ b/drivers/usb/typec/ucsi/Kconfig
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config TYPEC_UCSI
+	tristate "USB Type-C Connector System Software Interface driver"
+	depends on !CPU_BIG_ENDIAN
+	depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
+	help
+	  USB Type-C Connector System Software Interface (UCSI) is a
+	  specification for an interface that allows the operating system to
+	  control the USB Type-C ports. On UCSI system the USB Type-C ports
+	  function autonomously by default, but in order to get the status of
+	  the ports and support basic operations like role swapping, the driver
+	  is required. UCSI is available on most of the new Intel based systems
+	  that are equipped with Embedded Controller and USB Type-C ports.
+
+	  UCSI specification does not define the interface method, so depending
+	  on the platform, ACPI, PCI, I2C, etc. may be used. Therefore this
+	  driver only provides the core part, and separate drivers are needed
+	  for every supported interface method.
+
+	  The UCSI specification can be downloaded from:
+	  https://www.intel.com/content/www/us/en/io/universal-serial-bus/usb-type-c-ucsi-spec.html
+
+	  To compile the driver as a module, choose M here: the module will be
+	  called typec_ucsi.
+
+if TYPEC_UCSI
+
+config UCSI_CCG
+	tristate "UCSI Interface Driver for Cypress CCGx"
+	depends on I2C
+	help
+	  This driver enables UCSI support on platforms that expose a
+	  Cypress CCGx Type-C controller over I2C interface.
+
+	  To compile the driver as a module, choose M here: the module will be
+	  called ucsi_ccg.
+
+config UCSI_ACPI
+	tristate "UCSI ACPI Interface Driver"
+	depends on ACPI
+	help
+	  This driver enables UCSI support on platforms that expose UCSI
+	  interface as ACPI device. On new Intel Atom based platforms starting
+	  from Broxton SoCs and Core platforms stating from Skylake, UCSI is an
+	  ACPI enumerated device.
+
+	  To compile the driver as a module, choose M here: the module will be
+	  called ucsi_acpi
+
+config UCSI_STM32G0
+	tristate "UCSI Interface Driver for STM32G0"
+	depends on I2C
+	help
+	  This driver enables UCSI support on platforms that expose a STM32G0
+	  Type-C controller over I2C interface.
+
+	  To compile the driver as a module, choose M here: the module will be
+	  called ucsi_stm32g0.
+
+endif
diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
new file mode 100644
index 000000000..480d533d7
--- /dev/null
+++ b/drivers/usb/typec/ucsi/Makefile
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+CFLAGS_trace.o				:= -I$(src)
+
+obj-$(CONFIG_TYPEC_UCSI)		+= typec_ucsi.o
+
+typec_ucsi-y				:= ucsi.o
+
+typec_ucsi-$(CONFIG_TRACING)		+= trace.o
+
+ifneq ($(CONFIG_POWER_SUPPLY),)
+	typec_ucsi-y			+= psy.o
+endif
+
+ifneq ($(CONFIG_TYPEC_DP_ALTMODE),)
+	typec_ucsi-y			+= displayport.o
+endif
+
+obj-$(CONFIG_UCSI_ACPI)			+= ucsi_acpi.o
+obj-$(CONFIG_UCSI_CCG)			+= ucsi_ccg.o
+obj-$(CONFIG_UCSI_STM32G0)		+= ucsi_stm32g0.o
diff --git a/drivers/usb/typec/ucsi/displayport.c b/drivers/usb/typec/ucsi/displayport.c
new file mode 100644
index 000000000..73cd5bf35
--- /dev/null
+++ b/drivers/usb/typec/ucsi/displayport.c
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * UCSI DisplayPort Alternate Mode Support
+ *
+ * Copyright (C) 2018, Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/pd_vdo.h>
+
+#include "ucsi.h"
+
+#define UCSI_CMD_SET_NEW_CAM(_con_num_, _enter_, _cam_, _am_)		\
+	 (UCSI_SET_NEW_CAM | ((_con_num_) << 16) | ((_enter_) << 23) |	\
+	  ((_cam_) << 24) | ((u64)(_am_) << 32))
+
+struct ucsi_dp {
+	struct typec_displayport_data data;
+	struct ucsi_connector *con;
+	struct typec_altmode *alt;
+	struct work_struct work;
+	int offset;
+
+	bool override;
+	bool initialized;
+
+	u32 header;
+	u32 *vdo_data;
+	u8 vdo_size;
+};
+
+/*
+ * Note. Alternate mode control is optional feature in UCSI. It means that even
+ * if the system supports alternate modes, the OS may not be aware of them.
+ *
+ * In most cases however, the OS will be able to see the supported alternate
+ * modes, but it may still not be able to configure them, not even enter or exit
+ * them. That is because UCSI defines alt mode details and alt mode "overriding"
+ * as separate options.
+ *
+ * In case alt mode details are supported, but overriding is not, the driver
+ * will still display the supported pin assignments and configuration, but any
+ * changes the user attempts to do will lead into failure with return value of
+ * -EOPNOTSUPP.
+ */
+
+static int ucsi_displayport_enter(struct typec_altmode *alt, u32 *vdo)
+{
+	struct ucsi_dp *dp = typec_altmode_get_drvdata(alt);
+	struct ucsi *ucsi = dp->con->ucsi;
+	int svdm_version;
+	u64 command;
+	u8 cur = 0;
+	int ret;
+
+	mutex_lock(&dp->con->lock);
+
+	if (!dp->override && dp->initialized) {
+		const struct typec_altmode *p = typec_altmode_get_partner(alt);
+
+		dev_warn(&p->dev,
+			 "firmware doesn't support alternate mode overriding\n");
+		ret = -EOPNOTSUPP;
+		goto err_unlock;
+	}
+
+	command = UCSI_GET_CURRENT_CAM | UCSI_CONNECTOR_NUMBER(dp->con->num);
+	ret = ucsi_send_command(ucsi, command, &cur, sizeof(cur));
+	if (ret < 0) {
+		if (ucsi->version > 0x0100)
+			goto err_unlock;
+		cur = 0xff;
+	}
+
+	if (cur != 0xff) {
+		ret = dp->con->port_altmode[cur] == alt ? 0 : -EBUSY;
+		goto err_unlock;
+	}
+
+	/*
+	 * We can't send the New CAM command yet to the PPM as it needs the
+	 * configuration value as well. Pretending that we have now entered the
+	 * mode, and letting the alt mode driver continue.
+	 */
+
+	svdm_version = typec_altmode_get_svdm_version(alt);
+	if (svdm_version < 0) {
+		ret = svdm_version;
+		goto err_unlock;
+	}
+
+	dp->header = VDO(USB_TYPEC_DP_SID, 1, svdm_version, CMD_ENTER_MODE);
+	dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE);
+	dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+
+	dp->vdo_data = NULL;
+	dp->vdo_size = 1;
+
+	schedule_work(&dp->work);
+	ret = 0;
+err_unlock:
+	mutex_unlock(&dp->con->lock);
+
+	return ret;
+}
+
+static int ucsi_displayport_exit(struct typec_altmode *alt)
+{
+	struct ucsi_dp *dp = typec_altmode_get_drvdata(alt);
+	int svdm_version;
+	u64 command;
+	int ret = 0;
+
+	mutex_lock(&dp->con->lock);
+
+	if (!dp->override) {
+		const struct typec_altmode *p = typec_altmode_get_partner(alt);
+
+		dev_warn(&p->dev,
+			 "firmware doesn't support alternate mode overriding\n");
+		ret = -EOPNOTSUPP;
+		goto out_unlock;
+	}
+
+	command = UCSI_CMD_SET_NEW_CAM(dp->con->num, 0, dp->offset, 0);
+	ret = ucsi_send_command(dp->con->ucsi, command, NULL, 0);
+	if (ret < 0)
+		goto out_unlock;
+
+	svdm_version = typec_altmode_get_svdm_version(alt);
+	if (svdm_version < 0) {
+		ret = svdm_version;
+		goto out_unlock;
+	}
+
+	dp->header = VDO(USB_TYPEC_DP_SID, 1, svdm_version, CMD_EXIT_MODE);
+	dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE);
+	dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+
+	dp->vdo_data = NULL;
+	dp->vdo_size = 1;
+
+	schedule_work(&dp->work);
+
+out_unlock:
+	mutex_unlock(&dp->con->lock);
+
+	return ret;
+}
+
+/*
+ * We do not actually have access to the Status Update VDO, so we have to guess
+ * things.
+ */
+static int ucsi_displayport_status_update(struct ucsi_dp *dp)
+{
+	u32 cap = dp->alt->vdo;
+
+	dp->data.status = DP_STATUS_ENABLED;
+
+	/*
+	 * If pin assignement D is supported, claiming always
+	 * that Multi-function is preferred.
+	 */
+	if (DP_CAP_CAPABILITY(cap) & DP_CAP_UFP_D) {
+		dp->data.status |= DP_STATUS_CON_UFP_D;
+
+		if (DP_CAP_UFP_D_PIN_ASSIGN(cap) & BIT(DP_PIN_ASSIGN_D))
+			dp->data.status |= DP_STATUS_PREFER_MULTI_FUNC;
+	} else {
+		dp->data.status |= DP_STATUS_CON_DFP_D;
+
+		if (DP_CAP_DFP_D_PIN_ASSIGN(cap) & BIT(DP_PIN_ASSIGN_D))
+			dp->data.status |= DP_STATUS_PREFER_MULTI_FUNC;
+	}
+
+	dp->vdo_data = &dp->data.status;
+	dp->vdo_size = 2;
+
+	return 0;
+}
+
+static int ucsi_displayport_configure(struct ucsi_dp *dp)
+{
+	u32 pins = DP_CONF_GET_PIN_ASSIGN(dp->data.conf);
+	u64 command;
+
+	if (!dp->override)
+		return 0;
+
+	command = UCSI_CMD_SET_NEW_CAM(dp->con->num, 1, dp->offset, pins);
+
+	return ucsi_send_command(dp->con->ucsi, command, NULL, 0);
+}
+
+static int ucsi_displayport_vdm(struct typec_altmode *alt,
+				u32 header, const u32 *data, int count)
+{
+	struct ucsi_dp *dp = typec_altmode_get_drvdata(alt);
+	int cmd_type = PD_VDO_CMDT(header);
+	int cmd = PD_VDO_CMD(header);
+	int svdm_version;
+
+	mutex_lock(&dp->con->lock);
+
+	if (!dp->override && dp->initialized) {
+		const struct typec_altmode *p = typec_altmode_get_partner(alt);
+
+		dev_warn(&p->dev,
+			 "firmware doesn't support alternate mode overriding\n");
+		mutex_unlock(&dp->con->lock);
+		return -EOPNOTSUPP;
+	}
+
+	svdm_version = typec_altmode_get_svdm_version(alt);
+	if (svdm_version < 0) {
+		mutex_unlock(&dp->con->lock);
+		return svdm_version;
+	}
+
+	switch (cmd_type) {
+	case CMDT_INIT:
+		if (PD_VDO_SVDM_VER(header) < svdm_version) {
+			typec_partner_set_svdm_version(dp->con->partner, PD_VDO_SVDM_VER(header));
+			svdm_version = PD_VDO_SVDM_VER(header);
+		}
+
+		dp->header = VDO(USB_TYPEC_DP_SID, 1, svdm_version, cmd);
+		dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE);
+
+		switch (cmd) {
+		case DP_CMD_STATUS_UPDATE:
+			if (ucsi_displayport_status_update(dp))
+				dp->header |= VDO_CMDT(CMDT_RSP_NAK);
+			else
+				dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+			break;
+		case DP_CMD_CONFIGURE:
+			dp->data.conf = *data;
+			if (ucsi_displayport_configure(dp)) {
+				dp->header |= VDO_CMDT(CMDT_RSP_NAK);
+			} else {
+				dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+				if (dp->initialized)
+					ucsi_altmode_update_active(dp->con);
+				else
+					dp->initialized = true;
+			}
+			break;
+		default:
+			dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+			break;
+		}
+
+		schedule_work(&dp->work);
+		break;
+	default:
+		break;
+	}
+
+	mutex_unlock(&dp->con->lock);
+
+	return 0;
+}
+
+static const struct typec_altmode_ops ucsi_displayport_ops = {
+	.enter = ucsi_displayport_enter,
+	.exit = ucsi_displayport_exit,
+	.vdm = ucsi_displayport_vdm,
+};
+
+static void ucsi_displayport_work(struct work_struct *work)
+{
+	struct ucsi_dp *dp = container_of(work, struct ucsi_dp, work);
+	int ret;
+
+	mutex_lock(&dp->con->lock);
+
+	ret = typec_altmode_vdm(dp->alt, dp->header,
+				dp->vdo_data, dp->vdo_size);
+	if (ret)
+		dev_err(&dp->alt->dev, "VDM 0x%x failed\n", dp->header);
+
+	dp->vdo_data = NULL;
+	dp->vdo_size = 0;
+	dp->header = 0;
+
+	mutex_unlock(&dp->con->lock);
+}
+
+void ucsi_displayport_remove_partner(struct typec_altmode *alt)
+{
+	struct ucsi_dp *dp;
+
+	if (!alt)
+		return;
+
+	dp = typec_altmode_get_drvdata(alt);
+	if (!dp)
+		return;
+
+	dp->data.conf = 0;
+	dp->data.status = 0;
+	dp->initialized = false;
+}
+
+struct typec_altmode *ucsi_register_displayport(struct ucsi_connector *con,
+						bool override, int offset,
+						struct typec_altmode_desc *desc)
+{
+	u8 all_assignments = BIT(DP_PIN_ASSIGN_C) | BIT(DP_PIN_ASSIGN_D) |
+			     BIT(DP_PIN_ASSIGN_E);
+	struct typec_altmode *alt;
+	struct ucsi_dp *dp;
+
+	/* We can't rely on the firmware with the capabilities. */
+	desc->vdo |= DP_CAP_DP_SIGNALING | DP_CAP_RECEPTACLE;
+
+	/* Claiming that we support all pin assignments */
+	desc->vdo |= all_assignments << 8;
+	desc->vdo |= all_assignments << 16;
+
+	alt = typec_port_register_altmode(con->port, desc);
+	if (IS_ERR(alt))
+		return alt;
+
+	dp = devm_kzalloc(&alt->dev, sizeof(*dp), GFP_KERNEL);
+	if (!dp) {
+		typec_unregister_altmode(alt);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	INIT_WORK(&dp->work, ucsi_displayport_work);
+	dp->override = override;
+	dp->offset = offset;
+	dp->con = con;
+	dp->alt = alt;
+
+	alt->ops = &ucsi_displayport_ops;
+	typec_altmode_set_drvdata(alt, dp);
+
+	return alt;
+}
diff --git a/drivers/usb/typec/ucsi/psy.c b/drivers/usb/typec/ucsi/psy.c
new file mode 100644
index 000000000..b35c6e079
--- /dev/null
+++ b/drivers/usb/typec/ucsi/psy.c
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Power Supply for UCSI
+ *
+ * Copyright (C) 2020, Intel Corporation
+ * Author: K V, Abhilash <abhilash.k.v@intel.com>
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/property.h>
+#include <linux/usb/pd.h>
+
+#include "ucsi.h"
+
+/* Power Supply access to expose source power information */
+enum ucsi_psy_online_states {
+	UCSI_PSY_OFFLINE = 0,
+	UCSI_PSY_FIXED_ONLINE,
+	UCSI_PSY_PROG_ONLINE,
+};
+
+static enum power_supply_property ucsi_psy_props[] = {
+	POWER_SUPPLY_PROP_USB_TYPE,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_SCOPE,
+};
+
+static int ucsi_psy_get_scope(struct ucsi_connector *con,
+			      union power_supply_propval *val)
+{
+	u8 scope = POWER_SUPPLY_SCOPE_UNKNOWN;
+	struct device *dev = con->ucsi->dev;
+
+	device_property_read_u8(dev, "scope", &scope);
+	if (scope == POWER_SUPPLY_SCOPE_UNKNOWN) {
+		u32 mask = UCSI_CAP_ATTR_POWER_AC_SUPPLY |
+			   UCSI_CAP_ATTR_BATTERY_CHARGING;
+
+		if (con->ucsi->cap.attributes & mask)
+			scope = POWER_SUPPLY_SCOPE_SYSTEM;
+		else
+			scope = POWER_SUPPLY_SCOPE_DEVICE;
+	}
+	val->intval = scope;
+	return 0;
+}
+
+static int ucsi_psy_get_online(struct ucsi_connector *con,
+			       union power_supply_propval *val)
+{
+	val->intval = UCSI_PSY_OFFLINE;
+	if (con->status.flags & UCSI_CONSTAT_CONNECTED &&
+	    (con->status.flags & UCSI_CONSTAT_PWR_DIR) == TYPEC_SINK)
+		val->intval = UCSI_PSY_FIXED_ONLINE;
+	return 0;
+}
+
+static int ucsi_psy_get_voltage_min(struct ucsi_connector *con,
+				    union power_supply_propval *val)
+{
+	u32 pdo;
+
+	switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) {
+	case UCSI_CONSTAT_PWR_OPMODE_PD:
+		pdo = con->src_pdos[0];
+		val->intval = pdo_fixed_voltage(pdo) * 1000;
+		break;
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0:
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
+	case UCSI_CONSTAT_PWR_OPMODE_BC:
+	case UCSI_CONSTAT_PWR_OPMODE_DEFAULT:
+		val->intval = UCSI_TYPEC_VSAFE5V * 1000;
+		break;
+	default:
+		val->intval = 0;
+		break;
+	}
+	return 0;
+}
+
+static int ucsi_psy_get_voltage_max(struct ucsi_connector *con,
+				    union power_supply_propval *val)
+{
+	u32 pdo;
+
+	switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) {
+	case UCSI_CONSTAT_PWR_OPMODE_PD:
+		if (con->num_pdos > 0) {
+			pdo = con->src_pdos[con->num_pdos - 1];
+			val->intval = pdo_fixed_voltage(pdo) * 1000;
+		} else {
+			val->intval = 0;
+		}
+		break;
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0:
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
+	case UCSI_CONSTAT_PWR_OPMODE_BC:
+	case UCSI_CONSTAT_PWR_OPMODE_DEFAULT:
+		val->intval = UCSI_TYPEC_VSAFE5V * 1000;
+		break;
+	default:
+		val->intval = 0;
+		break;
+	}
+	return 0;
+}
+
+static int ucsi_psy_get_voltage_now(struct ucsi_connector *con,
+				    union power_supply_propval *val)
+{
+	int index;
+	u32 pdo;
+
+	switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) {
+	case UCSI_CONSTAT_PWR_OPMODE_PD:
+		index = rdo_index(con->rdo);
+		if (index > 0) {
+			pdo = con->src_pdos[index - 1];
+			val->intval = pdo_fixed_voltage(pdo) * 1000;
+		} else {
+			val->intval = 0;
+		}
+		break;
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0:
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
+	case UCSI_CONSTAT_PWR_OPMODE_BC:
+	case UCSI_CONSTAT_PWR_OPMODE_DEFAULT:
+		val->intval = UCSI_TYPEC_VSAFE5V * 1000;
+		break;
+	default:
+		val->intval = 0;
+		break;
+	}
+	return 0;
+}
+
+static int ucsi_psy_get_current_max(struct ucsi_connector *con,
+				    union power_supply_propval *val)
+{
+	u32 pdo;
+
+	switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) {
+	case UCSI_CONSTAT_PWR_OPMODE_PD:
+		if (con->num_pdos > 0) {
+			pdo = con->src_pdos[con->num_pdos - 1];
+			val->intval = pdo_max_current(pdo) * 1000;
+		} else {
+			val->intval = 0;
+		}
+		break;
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
+		val->intval = UCSI_TYPEC_1_5_CURRENT * 1000;
+		break;
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0:
+		val->intval = UCSI_TYPEC_3_0_CURRENT * 1000;
+		break;
+	case UCSI_CONSTAT_PWR_OPMODE_BC:
+	case UCSI_CONSTAT_PWR_OPMODE_DEFAULT:
+	/* UCSI can't tell b/w DCP/CDP or USB2/3x1/3x2 SDP chargers */
+	default:
+		val->intval = 0;
+		break;
+	}
+	return 0;
+}
+
+static int ucsi_psy_get_current_now(struct ucsi_connector *con,
+				    union power_supply_propval *val)
+{
+	u16 flags = con->status.flags;
+
+	if (UCSI_CONSTAT_PWR_OPMODE(flags) == UCSI_CONSTAT_PWR_OPMODE_PD)
+		val->intval = rdo_op_current(con->rdo) * 1000;
+	else
+		val->intval = 0;
+	return 0;
+}
+
+static int ucsi_psy_get_usb_type(struct ucsi_connector *con,
+				 union power_supply_propval *val)
+{
+	u16 flags = con->status.flags;
+
+	val->intval = POWER_SUPPLY_USB_TYPE_C;
+	if (flags & UCSI_CONSTAT_CONNECTED &&
+	    UCSI_CONSTAT_PWR_OPMODE(flags) == UCSI_CONSTAT_PWR_OPMODE_PD)
+		val->intval = POWER_SUPPLY_USB_TYPE_PD;
+
+	return 0;
+}
+
+static int ucsi_psy_get_prop(struct power_supply *psy,
+			     enum power_supply_property psp,
+			     union power_supply_propval *val)
+{
+	struct ucsi_connector *con = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		return ucsi_psy_get_usb_type(con, val);
+	case POWER_SUPPLY_PROP_ONLINE:
+		return ucsi_psy_get_online(con, val);
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		return ucsi_psy_get_voltage_min(con, val);
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		return ucsi_psy_get_voltage_max(con, val);
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		return ucsi_psy_get_voltage_now(con, val);
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		return ucsi_psy_get_current_max(con, val);
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		return ucsi_psy_get_current_now(con, val);
+	case POWER_SUPPLY_PROP_SCOPE:
+		return ucsi_psy_get_scope(con, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static enum power_supply_usb_type ucsi_psy_usb_types[] = {
+	POWER_SUPPLY_USB_TYPE_C,
+	POWER_SUPPLY_USB_TYPE_PD,
+	POWER_SUPPLY_USB_TYPE_PD_PPS,
+};
+
+int ucsi_register_port_psy(struct ucsi_connector *con)
+{
+	struct power_supply_config psy_cfg = {};
+	struct device *dev = con->ucsi->dev;
+	char *psy_name;
+
+	psy_cfg.drv_data = con;
+	psy_cfg.fwnode = dev_fwnode(dev);
+
+	psy_name = devm_kasprintf(dev, GFP_KERNEL, "ucsi-source-psy-%s%d",
+				  dev_name(dev), con->num);
+	if (!psy_name)
+		return -ENOMEM;
+
+	con->psy_desc.name = psy_name;
+	con->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+	con->psy_desc.usb_types = ucsi_psy_usb_types;
+	con->psy_desc.num_usb_types = ARRAY_SIZE(ucsi_psy_usb_types);
+	con->psy_desc.properties = ucsi_psy_props;
+	con->psy_desc.num_properties = ARRAY_SIZE(ucsi_psy_props);
+	con->psy_desc.get_property = ucsi_psy_get_prop;
+
+	con->psy = power_supply_register(dev, &con->psy_desc, &psy_cfg);
+
+	return PTR_ERR_OR_ZERO(con->psy);
+}
+
+void ucsi_unregister_port_psy(struct ucsi_connector *con)
+{
+	if (IS_ERR_OR_NULL(con->psy))
+		return;
+
+	power_supply_unregister(con->psy);
+	con->psy = NULL;
+}
+
+void ucsi_port_psy_changed(struct ucsi_connector *con)
+{
+	if (IS_ERR_OR_NULL(con->psy))
+		return;
+
+	power_supply_changed(con->psy);
+}
diff --git a/drivers/usb/typec/ucsi/trace.c b/drivers/usb/typec/ucsi/trace.c
new file mode 100644
index 000000000..cb62ad835
--- /dev/null
+++ b/drivers/usb/typec/ucsi/trace.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+#define CREATE_TRACE_POINTS
+#include "ucsi.h"
+#include "trace.h"
+
+static const char * const ucsi_cmd_strs[] = {
+	[0]				= "Unknown command",
+	[UCSI_PPM_RESET]		= "PPM_RESET",
+	[UCSI_CANCEL]			= "CANCEL",
+	[UCSI_CONNECTOR_RESET]		= "CONNECTOR_RESET",
+	[UCSI_ACK_CC_CI]		= "ACK_CC_CI",
+	[UCSI_SET_NOTIFICATION_ENABLE]	= "SET_NOTIFICATION_ENABLE",
+	[UCSI_GET_CAPABILITY]		= "GET_CAPABILITY",
+	[UCSI_GET_CONNECTOR_CAPABILITY]	= "GET_CONNECTOR_CAPABILITY",
+	[UCSI_SET_UOM]			= "SET_UOM",
+	[UCSI_SET_UOR]			= "SET_UOR",
+	[UCSI_SET_PDM]			= "SET_PDM",
+	[UCSI_SET_PDR]			= "SET_PDR",
+	[UCSI_GET_ALTERNATE_MODES]	= "GET_ALTERNATE_MODES",
+	[UCSI_GET_CAM_SUPPORTED]	= "GET_CAM_SUPPORTED",
+	[UCSI_GET_CURRENT_CAM]		= "GET_CURRENT_CAM",
+	[UCSI_SET_NEW_CAM]		= "SET_NEW_CAM",
+	[UCSI_GET_PDOS]			= "GET_PDOS",
+	[UCSI_GET_CABLE_PROPERTY]	= "GET_CABLE_PROPERTY",
+	[UCSI_GET_CONNECTOR_STATUS]	= "GET_CONNECTOR_STATUS",
+	[UCSI_GET_ERROR_STATUS]		= "GET_ERROR_STATUS",
+};
+
+const char *ucsi_cmd_str(u64 raw_cmd)
+{
+	u8 cmd = raw_cmd & GENMASK(7, 0);
+
+	return ucsi_cmd_strs[(cmd >= ARRAY_SIZE(ucsi_cmd_strs)) ? 0 : cmd];
+}
+
+const char *ucsi_cci_str(u32 cci)
+{
+	if (UCSI_CCI_CONNECTOR(cci)) {
+		if (cci & UCSI_CCI_ACK_COMPLETE)
+			return "Event pending (ACK completed)";
+		if (cci & UCSI_CCI_COMMAND_COMPLETE)
+			return "Event pending (command completed)";
+		return "Connector Change";
+	}
+	if (cci & UCSI_CCI_ACK_COMPLETE)
+		return "ACK completed";
+	if (cci & UCSI_CCI_COMMAND_COMPLETE)
+		return "Command completed";
+
+	return "";
+}
+
+static const char * const ucsi_recipient_strs[] = {
+	[UCSI_RECIPIENT_CON]		= "port",
+	[UCSI_RECIPIENT_SOP]		= "partner",
+	[UCSI_RECIPIENT_SOP_P]		= "plug (prime)",
+	[UCSI_RECIPIENT_SOP_PP]		= "plug (double prime)",
+};
+
+const char *ucsi_recipient_str(u8 recipient)
+{
+	return ucsi_recipient_strs[recipient];
+}
diff --git a/drivers/usb/typec/ucsi/trace.h b/drivers/usb/typec/ucsi/trace.h
new file mode 100644
index 000000000..a0d3a934d
--- /dev/null
+++ b/drivers/usb/typec/ucsi/trace.h
@@ -0,0 +1,120 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM ucsi
+
+#if !defined(__UCSI_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define __UCSI_TRACE_H
+
+#include <linux/tracepoint.h>
+#include <linux/usb/typec_altmode.h>
+
+const char *ucsi_cmd_str(u64 raw_cmd);
+const char *ucsi_cci_str(u32 cci);
+const char *ucsi_recipient_str(u8 recipient);
+
+DECLARE_EVENT_CLASS(ucsi_log_command,
+	TP_PROTO(u64 command, int ret),
+	TP_ARGS(command, ret),
+	TP_STRUCT__entry(
+		__field(u64, ctrl)
+		__field(int, ret)
+	),
+	TP_fast_assign(
+		__entry->ctrl = command;
+		__entry->ret = ret;
+	),
+	TP_printk("%s -> %s (err=%d)", ucsi_cmd_str(__entry->ctrl),
+		__entry->ret < 0 ? "FAIL" : "OK",
+		__entry->ret < 0 ? __entry->ret : 0)
+);
+
+DEFINE_EVENT(ucsi_log_command, ucsi_run_command,
+	TP_PROTO(u64 command, int ret),
+	TP_ARGS(command, ret)
+);
+
+DEFINE_EVENT(ucsi_log_command, ucsi_reset_ppm,
+	TP_PROTO(u64 command, int ret),
+	TP_ARGS(command, ret)
+);
+
+DECLARE_EVENT_CLASS(ucsi_log_connector_status,
+	TP_PROTO(int port, struct ucsi_connector_status *status),
+	TP_ARGS(port, status),
+	TP_STRUCT__entry(
+		__field(int, port)
+		__field(u16, change)
+		__field(u8, opmode)
+		__field(u8, connected)
+		__field(u8, pwr_dir)
+		__field(u8, partner_flags)
+		__field(u8, partner_type)
+		__field(u32, request_data_obj)
+		__field(u8, bc_status)
+	),
+	TP_fast_assign(
+		__entry->port = port - 1;
+		__entry->change = status->change;
+		__entry->opmode = UCSI_CONSTAT_PWR_OPMODE(status->flags);
+		__entry->connected = !!(status->flags & UCSI_CONSTAT_CONNECTED);
+		__entry->pwr_dir = !!(status->flags & UCSI_CONSTAT_PWR_DIR);
+		__entry->partner_flags = UCSI_CONSTAT_PARTNER_FLAGS(status->flags);
+		__entry->partner_type = UCSI_CONSTAT_PARTNER_TYPE(status->flags);
+		__entry->request_data_obj = status->request_data_obj;
+		__entry->bc_status = UCSI_CONSTAT_BC_STATUS(status->pwr_status);
+	),
+	TP_printk("port%d status: change=%04x, opmode=%x, connected=%d, "
+		"sourcing=%d, partner_flags=%x, partner_type=%x, "
+		"request_data_obj=%08x, BC status=%x", __entry->port,
+		__entry->change, __entry->opmode, __entry->connected,
+		__entry->pwr_dir, __entry->partner_flags, __entry->partner_type,
+		__entry->request_data_obj, __entry->bc_status)
+);
+
+DEFINE_EVENT(ucsi_log_connector_status, ucsi_connector_change,
+	TP_PROTO(int port, struct ucsi_connector_status *status),
+	TP_ARGS(port, status)
+);
+
+DEFINE_EVENT(ucsi_log_connector_status, ucsi_register_port,
+	TP_PROTO(int port, struct ucsi_connector_status *status),
+	TP_ARGS(port, status)
+);
+
+DECLARE_EVENT_CLASS(ucsi_log_register_altmode,
+	TP_PROTO(u8 recipient, struct typec_altmode *alt),
+	TP_ARGS(recipient, alt),
+	TP_STRUCT__entry(
+		__field(u8, recipient)
+		__field(u16, svid)
+		__field(u8, mode)
+		__field(u32, vdo)
+	),
+	TP_fast_assign(
+		__entry->recipient = recipient;
+		__entry->svid = alt->svid;
+		__entry->mode = alt->mode;
+		__entry->vdo = alt->vdo;
+	),
+	TP_printk("%s alt mode: svid %04x, mode %d vdo %x",
+		  ucsi_recipient_str(__entry->recipient), __entry->svid,
+		  __entry->mode, __entry->vdo)
+);
+
+DEFINE_EVENT(ucsi_log_register_altmode, ucsi_register_altmode,
+	TP_PROTO(u8 recipient, struct typec_altmode *alt),
+	TP_ARGS(recipient, alt)
+);
+
+#endif /* __UCSI_TRACE_H */
+
+/* This part must be outside protection */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
new file mode 100644
index 000000000..dc2dea376
--- /dev/null
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -0,0 +1,1460 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Type-C Connector System Software Interface driver
+ *
+ * Copyright (C) 2017, Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/completion.h>
+#include <linux/property.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/usb/typec_dp.h>
+
+#include "ucsi.h"
+#include "trace.h"
+
+/*
+ * UCSI_TIMEOUT_MS - PPM communication timeout
+ *
+ * Ideally we could use MIN_TIME_TO_RESPOND_WITH_BUSY (which is defined in UCSI
+ * specification) here as reference, but unfortunately we can't. It is very
+ * difficult to estimate the time it takes for the system to process the command
+ * before it is actually passed to the PPM.
+ */
+#define UCSI_TIMEOUT_MS		5000
+
+/*
+ * UCSI_SWAP_TIMEOUT_MS - Timeout for role swap requests
+ *
+ * 5 seconds is close to the time it takes for CapsCounter to reach 0, so even
+ * if the PPM does not generate Connector Change events before that with
+ * partners that do not support USB Power Delivery, this should still work.
+ */
+#define UCSI_SWAP_TIMEOUT_MS	5000
+
+static int ucsi_acknowledge_command(struct ucsi *ucsi)
+{
+	u64 ctrl;
+
+	ctrl = UCSI_ACK_CC_CI;
+	ctrl |= UCSI_ACK_COMMAND_COMPLETE;
+
+	return ucsi->ops->sync_write(ucsi, UCSI_CONTROL, &ctrl, sizeof(ctrl));
+}
+
+static int ucsi_acknowledge_connector_change(struct ucsi *ucsi)
+{
+	u64 ctrl;
+
+	ctrl = UCSI_ACK_CC_CI;
+	ctrl |= UCSI_ACK_CONNECTOR_CHANGE;
+
+	return ucsi->ops->sync_write(ucsi, UCSI_CONTROL, &ctrl, sizeof(ctrl));
+}
+
+static int ucsi_exec_command(struct ucsi *ucsi, u64 command);
+
+static int ucsi_read_error(struct ucsi *ucsi)
+{
+	u16 error;
+	int ret;
+
+	/* Acknowledge the command that failed */
+	ret = ucsi_acknowledge_command(ucsi);
+	if (ret)
+		return ret;
+
+	ret = ucsi_exec_command(ucsi, UCSI_GET_ERROR_STATUS);
+	if (ret < 0)
+		return ret;
+
+	ret = ucsi->ops->read(ucsi, UCSI_MESSAGE_IN, &error, sizeof(error));
+	if (ret)
+		return ret;
+
+	ret = ucsi_acknowledge_command(ucsi);
+	if (ret)
+		return ret;
+
+	switch (error) {
+	case UCSI_ERROR_INCOMPATIBLE_PARTNER:
+		return -EOPNOTSUPP;
+	case UCSI_ERROR_CC_COMMUNICATION_ERR:
+		return -ECOMM;
+	case UCSI_ERROR_CONTRACT_NEGOTIATION_FAIL:
+		return -EPROTO;
+	case UCSI_ERROR_DEAD_BATTERY:
+		dev_warn(ucsi->dev, "Dead battery condition!\n");
+		return -EPERM;
+	case UCSI_ERROR_INVALID_CON_NUM:
+	case UCSI_ERROR_UNREGONIZED_CMD:
+	case UCSI_ERROR_INVALID_CMD_ARGUMENT:
+		dev_err(ucsi->dev, "possible UCSI driver bug %u\n", error);
+		return -EINVAL;
+	case UCSI_ERROR_OVERCURRENT:
+		dev_warn(ucsi->dev, "Overcurrent condition\n");
+		break;
+	case UCSI_ERROR_PARTNER_REJECTED_SWAP:
+		dev_warn(ucsi->dev, "Partner rejected swap\n");
+		break;
+	case UCSI_ERROR_HARD_RESET:
+		dev_warn(ucsi->dev, "Hard reset occurred\n");
+		break;
+	case UCSI_ERROR_PPM_POLICY_CONFLICT:
+		dev_warn(ucsi->dev, "PPM Policy conflict\n");
+		break;
+	case UCSI_ERROR_SWAP_REJECTED:
+		dev_warn(ucsi->dev, "Swap rejected\n");
+		break;
+	case UCSI_ERROR_UNDEFINED:
+	default:
+		dev_err(ucsi->dev, "unknown error %u\n", error);
+		break;
+	}
+
+	return -EIO;
+}
+
+static int ucsi_exec_command(struct ucsi *ucsi, u64 cmd)
+{
+	u32 cci;
+	int ret;
+
+	ret = ucsi->ops->sync_write(ucsi, UCSI_CONTROL, &cmd, sizeof(cmd));
+	if (ret)
+		return ret;
+
+	ret = ucsi->ops->read(ucsi, UCSI_CCI, &cci, sizeof(cci));
+	if (ret)
+		return ret;
+
+	if (cmd != UCSI_CANCEL && cci & UCSI_CCI_BUSY)
+		return ucsi_exec_command(ucsi, UCSI_CANCEL);
+
+	if (!(cci & UCSI_CCI_COMMAND_COMPLETE))
+		return -EIO;
+
+	if (cci & UCSI_CCI_NOT_SUPPORTED)
+		return -EOPNOTSUPP;
+
+	if (cci & UCSI_CCI_ERROR) {
+		if (cmd == UCSI_GET_ERROR_STATUS)
+			return -EIO;
+		return ucsi_read_error(ucsi);
+	}
+
+	if (cmd == UCSI_CANCEL && cci & UCSI_CCI_CANCEL_COMPLETE) {
+		ret = ucsi_acknowledge_command(ucsi);
+		return ret ? ret : -EBUSY;
+	}
+
+	return UCSI_CCI_LENGTH(cci);
+}
+
+int ucsi_send_command(struct ucsi *ucsi, u64 command,
+		      void *data, size_t size)
+{
+	u8 length;
+	int ret;
+
+	mutex_lock(&ucsi->ppm_lock);
+
+	ret = ucsi_exec_command(ucsi, command);
+	if (ret < 0)
+		goto out;
+
+	length = ret;
+
+	if (data) {
+		ret = ucsi->ops->read(ucsi, UCSI_MESSAGE_IN, data, size);
+		if (ret)
+			goto out;
+	}
+
+	ret = ucsi_acknowledge_command(ucsi);
+	if (ret)
+		goto out;
+
+	ret = length;
+out:
+	mutex_unlock(&ucsi->ppm_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ucsi_send_command);
+
+/* -------------------------------------------------------------------------- */
+
+struct ucsi_work {
+	struct delayed_work work;
+	struct list_head node;
+	unsigned long delay;
+	unsigned int count;
+	struct ucsi_connector *con;
+	int (*cb)(struct ucsi_connector *);
+};
+
+static void ucsi_poll_worker(struct work_struct *work)
+{
+	struct ucsi_work *uwork = container_of(work, struct ucsi_work, work.work);
+	struct ucsi_connector *con = uwork->con;
+	int ret;
+
+	mutex_lock(&con->lock);
+
+	if (!con->partner) {
+		list_del(&uwork->node);
+		mutex_unlock(&con->lock);
+		kfree(uwork);
+		return;
+	}
+
+	ret = uwork->cb(con);
+
+	if (uwork->count-- && (ret == -EBUSY || ret == -ETIMEDOUT)) {
+		queue_delayed_work(con->wq, &uwork->work, uwork->delay);
+	} else {
+		list_del(&uwork->node);
+		kfree(uwork);
+	}
+
+	mutex_unlock(&con->lock);
+}
+
+static int ucsi_partner_task(struct ucsi_connector *con,
+			     int (*cb)(struct ucsi_connector *),
+			     int retries, unsigned long delay)
+{
+	struct ucsi_work *uwork;
+
+	if (!con->partner)
+		return 0;
+
+	uwork = kzalloc(sizeof(*uwork), GFP_KERNEL);
+	if (!uwork)
+		return -ENOMEM;
+
+	INIT_DELAYED_WORK(&uwork->work, ucsi_poll_worker);
+	uwork->count = retries;
+	uwork->delay = delay;
+	uwork->con = con;
+	uwork->cb = cb;
+
+	list_add_tail(&uwork->node, &con->partner_tasks);
+	queue_delayed_work(con->wq, &uwork->work, delay);
+
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+void ucsi_altmode_update_active(struct ucsi_connector *con)
+{
+	const struct typec_altmode *altmode = NULL;
+	u64 command;
+	int ret;
+	u8 cur;
+	int i;
+
+	command = UCSI_GET_CURRENT_CAM | UCSI_CONNECTOR_NUMBER(con->num);
+	ret = ucsi_send_command(con->ucsi, command, &cur, sizeof(cur));
+	if (ret < 0) {
+		if (con->ucsi->version > 0x0100) {
+			dev_err(con->ucsi->dev,
+				"GET_CURRENT_CAM command failed\n");
+			return;
+		}
+		cur = 0xff;
+	}
+
+	if (cur < UCSI_MAX_ALTMODES)
+		altmode = typec_altmode_get_partner(con->port_altmode[cur]);
+
+	for (i = 0; con->partner_altmode[i]; i++)
+		typec_altmode_update_active(con->partner_altmode[i],
+					    con->partner_altmode[i] == altmode);
+}
+
+static int ucsi_altmode_next_mode(struct typec_altmode **alt, u16 svid)
+{
+	u8 mode = 1;
+	int i;
+
+	for (i = 0; alt[i]; i++) {
+		if (i > MODE_DISCOVERY_MAX)
+			return -ERANGE;
+
+		if (alt[i]->svid == svid)
+			mode++;
+	}
+
+	return mode;
+}
+
+static int ucsi_next_altmode(struct typec_altmode **alt)
+{
+	int i = 0;
+
+	for (i = 0; i < UCSI_MAX_ALTMODES; i++)
+		if (!alt[i])
+			return i;
+
+	return -ENOENT;
+}
+
+static int ucsi_get_num_altmode(struct typec_altmode **alt)
+{
+	int i;
+
+	for (i = 0; i < UCSI_MAX_ALTMODES; i++)
+		if (!alt[i])
+			break;
+
+	return i;
+}
+
+static int ucsi_register_altmode(struct ucsi_connector *con,
+				 struct typec_altmode_desc *desc,
+				 u8 recipient)
+{
+	struct typec_altmode *alt;
+	bool override;
+	int ret;
+	int i;
+
+	override = !!(con->ucsi->cap.features & UCSI_CAP_ALT_MODE_OVERRIDE);
+
+	switch (recipient) {
+	case UCSI_RECIPIENT_CON:
+		i = ucsi_next_altmode(con->port_altmode);
+		if (i < 0) {
+			ret = i;
+			goto err;
+		}
+
+		ret = ucsi_altmode_next_mode(con->port_altmode, desc->svid);
+		if (ret < 0)
+			return ret;
+
+		desc->mode = ret;
+
+		switch (desc->svid) {
+		case USB_TYPEC_DP_SID:
+			alt = ucsi_register_displayport(con, override, i, desc);
+			break;
+		case USB_TYPEC_NVIDIA_VLINK_SID:
+			if (desc->vdo == USB_TYPEC_NVIDIA_VLINK_DBG_VDO)
+				alt = typec_port_register_altmode(con->port,
+								  desc);
+			else
+				alt = ucsi_register_displayport(con, override,
+								i, desc);
+			break;
+		default:
+			alt = typec_port_register_altmode(con->port, desc);
+			break;
+		}
+
+		if (IS_ERR(alt)) {
+			ret = PTR_ERR(alt);
+			goto err;
+		}
+
+		con->port_altmode[i] = alt;
+		break;
+	case UCSI_RECIPIENT_SOP:
+		i = ucsi_next_altmode(con->partner_altmode);
+		if (i < 0) {
+			ret = i;
+			goto err;
+		}
+
+		ret = ucsi_altmode_next_mode(con->partner_altmode, desc->svid);
+		if (ret < 0)
+			return ret;
+
+		desc->mode = ret;
+
+		alt = typec_partner_register_altmode(con->partner, desc);
+		if (IS_ERR(alt)) {
+			ret = PTR_ERR(alt);
+			goto err;
+		}
+
+		con->partner_altmode[i] = alt;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	trace_ucsi_register_altmode(recipient, alt);
+
+	return 0;
+
+err:
+	dev_err(con->ucsi->dev, "failed to registers svid 0x%04x mode %d\n",
+		desc->svid, desc->mode);
+
+	return ret;
+}
+
+static int
+ucsi_register_altmodes_nvidia(struct ucsi_connector *con, u8 recipient)
+{
+	int max_altmodes = UCSI_MAX_ALTMODES;
+	struct typec_altmode_desc desc;
+	struct ucsi_altmode alt;
+	struct ucsi_altmode orig[UCSI_MAX_ALTMODES];
+	struct ucsi_altmode updated[UCSI_MAX_ALTMODES];
+	struct ucsi *ucsi = con->ucsi;
+	bool multi_dp = false;
+	u64 command;
+	int ret;
+	int len;
+	int i;
+	int k = 0;
+
+	if (recipient == UCSI_RECIPIENT_CON)
+		max_altmodes = con->ucsi->cap.num_alt_modes;
+
+	memset(orig, 0, sizeof(orig));
+	memset(updated, 0, sizeof(updated));
+
+	/* First get all the alternate modes */
+	for (i = 0; i < max_altmodes; i++) {
+		memset(&alt, 0, sizeof(alt));
+		command = UCSI_GET_ALTERNATE_MODES;
+		command |= UCSI_GET_ALTMODE_RECIPIENT(recipient);
+		command |= UCSI_GET_ALTMODE_CONNECTOR_NUMBER(con->num);
+		command |= UCSI_GET_ALTMODE_OFFSET(i);
+		len = ucsi_send_command(con->ucsi, command, &alt, sizeof(alt));
+		/*
+		 * We are collecting all altmodes first and then registering.
+		 * Some type-C device will return zero length data beyond last
+		 * alternate modes. We should not return if length is zero.
+		 */
+		if (len < 0)
+			return len;
+
+		/* We got all altmodes, now break out and register them */
+		if (!len || !alt.svid)
+			break;
+
+		orig[k].mid = alt.mid;
+		orig[k].svid = alt.svid;
+		k++;
+	}
+	/*
+	 * Update the original altmode table as some ppms may report
+	 * multiple DP altmodes.
+	 */
+	if (recipient == UCSI_RECIPIENT_CON)
+		multi_dp = ucsi->ops->update_altmodes(ucsi, orig, updated);
+
+	/* now register altmodes */
+	for (i = 0; i < max_altmodes; i++) {
+		memset(&desc, 0, sizeof(desc));
+		if (multi_dp && recipient == UCSI_RECIPIENT_CON) {
+			desc.svid = updated[i].svid;
+			desc.vdo = updated[i].mid;
+		} else {
+			desc.svid = orig[i].svid;
+			desc.vdo = orig[i].mid;
+		}
+		desc.roles = TYPEC_PORT_DRD;
+
+		if (!desc.svid)
+			return 0;
+
+		ret = ucsi_register_altmode(con, &desc, recipient);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int ucsi_register_altmodes(struct ucsi_connector *con, u8 recipient)
+{
+	int max_altmodes = UCSI_MAX_ALTMODES;
+	struct typec_altmode_desc desc;
+	struct ucsi_altmode alt[2];
+	u64 command;
+	int num;
+	int ret;
+	int len;
+	int j;
+	int i;
+
+	if (!(con->ucsi->cap.features & UCSI_CAP_ALT_MODE_DETAILS))
+		return 0;
+
+	if (recipient == UCSI_RECIPIENT_SOP && con->partner_altmode[0])
+		return 0;
+
+	if (con->ucsi->ops->update_altmodes)
+		return ucsi_register_altmodes_nvidia(con, recipient);
+
+	if (recipient == UCSI_RECIPIENT_CON)
+		max_altmodes = con->ucsi->cap.num_alt_modes;
+
+	for (i = 0; i < max_altmodes;) {
+		memset(alt, 0, sizeof(alt));
+		command = UCSI_GET_ALTERNATE_MODES;
+		command |= UCSI_GET_ALTMODE_RECIPIENT(recipient);
+		command |= UCSI_GET_ALTMODE_CONNECTOR_NUMBER(con->num);
+		command |= UCSI_GET_ALTMODE_OFFSET(i);
+		len = ucsi_send_command(con->ucsi, command, alt, sizeof(alt));
+		if (len == -EBUSY)
+			continue;
+		if (len <= 0)
+			return len;
+
+		/*
+		 * This code is requesting one alt mode at a time, but some PPMs
+		 * may still return two. If that happens both alt modes need be
+		 * registered and the offset for the next alt mode has to be
+		 * incremented.
+		 */
+		num = len / sizeof(alt[0]);
+		i += num;
+
+		for (j = 0; j < num; j++) {
+			if (!alt[j].svid)
+				return 0;
+
+			memset(&desc, 0, sizeof(desc));
+			desc.vdo = alt[j].mid;
+			desc.svid = alt[j].svid;
+			desc.roles = TYPEC_PORT_DRD;
+
+			ret = ucsi_register_altmode(con, &desc, recipient);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)
+{
+	const struct typec_altmode *pdev;
+	struct typec_altmode **adev;
+	int i = 0;
+
+	switch (recipient) {
+	case UCSI_RECIPIENT_CON:
+		adev = con->port_altmode;
+		break;
+	case UCSI_RECIPIENT_SOP:
+		adev = con->partner_altmode;
+		break;
+	default:
+		return;
+	}
+
+	while (adev[i]) {
+		if (recipient == UCSI_RECIPIENT_SOP &&
+		    (adev[i]->svid == USB_TYPEC_DP_SID ||
+			(adev[i]->svid == USB_TYPEC_NVIDIA_VLINK_SID &&
+			adev[i]->vdo != USB_TYPEC_NVIDIA_VLINK_DBG_VDO))) {
+			pdev = typec_altmode_get_partner(adev[i]);
+			ucsi_displayport_remove_partner((void *)pdev);
+		}
+		typec_unregister_altmode(adev[i]);
+		adev[i++] = NULL;
+	}
+}
+
+static int ucsi_get_pdos(struct ucsi_connector *con, int is_partner,
+			 u32 *pdos, int offset, int num_pdos)
+{
+	struct ucsi *ucsi = con->ucsi;
+	u64 command;
+	int ret;
+
+	command = UCSI_COMMAND(UCSI_GET_PDOS) | UCSI_CONNECTOR_NUMBER(con->num);
+	command |= UCSI_GET_PDOS_PARTNER_PDO(is_partner);
+	command |= UCSI_GET_PDOS_PDO_OFFSET(offset);
+	command |= UCSI_GET_PDOS_NUM_PDOS(num_pdos - 1);
+	command |= UCSI_GET_PDOS_SRC_PDOS;
+	ret = ucsi_send_command(ucsi, command, pdos + offset,
+				num_pdos * sizeof(u32));
+	if (ret < 0 && ret != -ETIMEDOUT)
+		dev_err(ucsi->dev, "UCSI_GET_PDOS failed (%d)\n", ret);
+
+	return ret;
+}
+
+static int ucsi_get_src_pdos(struct ucsi_connector *con)
+{
+	int ret;
+
+	/* UCSI max payload means only getting at most 4 PDOs at a time */
+	ret = ucsi_get_pdos(con, 1, con->src_pdos, 0, UCSI_MAX_PDOS);
+	if (ret < 0)
+		return ret;
+
+	con->num_pdos = ret / sizeof(u32); /* number of bytes to 32-bit PDOs */
+	if (con->num_pdos < UCSI_MAX_PDOS)
+		return 0;
+
+	/* get the remaining PDOs, if any */
+	ret = ucsi_get_pdos(con, 1, con->src_pdos, UCSI_MAX_PDOS,
+			    PDO_MAX_OBJECTS - UCSI_MAX_PDOS);
+	if (ret < 0)
+		return ret;
+
+	con->num_pdos += ret / sizeof(u32);
+
+	ucsi_port_psy_changed(con);
+
+	return 0;
+}
+
+static int ucsi_check_altmodes(struct ucsi_connector *con)
+{
+	int ret, num_partner_am;
+
+	ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP);
+	if (ret && ret != -ETIMEDOUT)
+		dev_err(con->ucsi->dev,
+			"con%d: failed to register partner alt modes (%d)\n",
+			con->num, ret);
+
+	/* Ignoring the errors in this case. */
+	if (con->partner_altmode[0]) {
+		num_partner_am = ucsi_get_num_altmode(con->partner_altmode);
+		if (num_partner_am > 0)
+			typec_partner_set_num_altmodes(con->partner, num_partner_am);
+		ucsi_altmode_update_active(con);
+		return 0;
+	}
+
+	return ret;
+}
+
+static void ucsi_pwr_opmode_change(struct ucsi_connector *con)
+{
+	switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) {
+	case UCSI_CONSTAT_PWR_OPMODE_PD:
+		con->rdo = con->status.request_data_obj;
+		typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_PD);
+		ucsi_partner_task(con, ucsi_get_src_pdos, 30, 0);
+		ucsi_partner_task(con, ucsi_check_altmodes, 30, 0);
+		break;
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
+		con->rdo = 0;
+		typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_1_5A);
+		break;
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0:
+		con->rdo = 0;
+		typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_3_0A);
+		break;
+	default:
+		con->rdo = 0;
+		typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_USB);
+		break;
+	}
+}
+
+static int ucsi_register_partner(struct ucsi_connector *con)
+{
+	u8 pwr_opmode = UCSI_CONSTAT_PWR_OPMODE(con->status.flags);
+	struct typec_partner_desc desc;
+	struct typec_partner *partner;
+
+	if (con->partner)
+		return 0;
+
+	memset(&desc, 0, sizeof(desc));
+
+	switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) {
+	case UCSI_CONSTAT_PARTNER_TYPE_DEBUG:
+		desc.accessory = TYPEC_ACCESSORY_DEBUG;
+		break;
+	case UCSI_CONSTAT_PARTNER_TYPE_AUDIO:
+		desc.accessory = TYPEC_ACCESSORY_AUDIO;
+		break;
+	default:
+		break;
+	}
+
+	desc.usb_pd = pwr_opmode == UCSI_CONSTAT_PWR_OPMODE_PD;
+
+	partner = typec_register_partner(con->port, &desc);
+	if (IS_ERR(partner)) {
+		dev_err(con->ucsi->dev,
+			"con%d: failed to register partner (%ld)\n", con->num,
+			PTR_ERR(partner));
+		return PTR_ERR(partner);
+	}
+
+	con->partner = partner;
+
+	return 0;
+}
+
+static void ucsi_unregister_partner(struct ucsi_connector *con)
+{
+	if (!con->partner)
+		return;
+
+	ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP);
+	typec_unregister_partner(con->partner);
+	con->partner = NULL;
+}
+
+static void ucsi_partner_change(struct ucsi_connector *con)
+{
+	enum usb_role u_role = USB_ROLE_NONE;
+	int ret;
+
+	switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) {
+	case UCSI_CONSTAT_PARTNER_TYPE_UFP:
+	case UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP:
+		u_role = USB_ROLE_HOST;
+		fallthrough;
+	case UCSI_CONSTAT_PARTNER_TYPE_CABLE:
+		typec_set_data_role(con->port, TYPEC_HOST);
+		break;
+	case UCSI_CONSTAT_PARTNER_TYPE_DFP:
+		u_role = USB_ROLE_DEVICE;
+		typec_set_data_role(con->port, TYPEC_DEVICE);
+		break;
+	default:
+		break;
+	}
+
+	/* Only notify USB controller if partner supports USB data */
+	if (!(UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) & UCSI_CONSTAT_PARTNER_FLAG_USB))
+		u_role = USB_ROLE_NONE;
+
+	ret = usb_role_switch_set_role(con->usb_role_sw, u_role);
+	if (ret)
+		dev_err(con->ucsi->dev, "con:%d: failed to set usb role:%d\n",
+			con->num, u_role);
+}
+
+static int ucsi_check_connection(struct ucsi_connector *con)
+{
+	u8 prev_flags = con->status.flags;
+	u64 command;
+	int ret;
+
+	command = UCSI_GET_CONNECTOR_STATUS | UCSI_CONNECTOR_NUMBER(con->num);
+	ret = ucsi_send_command(con->ucsi, command, &con->status, sizeof(con->status));
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "GET_CONNECTOR_STATUS failed (%d)\n", ret);
+		return ret;
+	}
+
+	if (con->status.flags == prev_flags)
+		return 0;
+
+	if (con->status.flags & UCSI_CONSTAT_CONNECTED) {
+		ucsi_register_partner(con);
+		ucsi_pwr_opmode_change(con);
+		ucsi_partner_change(con);
+	} else {
+		ucsi_partner_change(con);
+		ucsi_port_psy_changed(con);
+		ucsi_unregister_partner(con);
+	}
+
+	return 0;
+}
+
+static void ucsi_handle_connector_change(struct work_struct *work)
+{
+	struct ucsi_connector *con = container_of(work, struct ucsi_connector,
+						  work);
+	struct ucsi *ucsi = con->ucsi;
+	enum typec_role role;
+	u64 command;
+	int ret;
+
+	mutex_lock(&con->lock);
+
+	command = UCSI_GET_CONNECTOR_STATUS | UCSI_CONNECTOR_NUMBER(con->num);
+	ret = ucsi_send_command(ucsi, command, &con->status, sizeof(con->status));
+	if (ret < 0) {
+		dev_err(ucsi->dev, "%s: GET_CONNECTOR_STATUS failed (%d)\n",
+			__func__, ret);
+		clear_bit(EVENT_PENDING, &con->ucsi->flags);
+		goto out_unlock;
+	}
+
+	trace_ucsi_connector_change(con->num, &con->status);
+
+	role = !!(con->status.flags & UCSI_CONSTAT_PWR_DIR);
+
+	if (con->status.change & UCSI_CONSTAT_POWER_DIR_CHANGE) {
+		typec_set_pwr_role(con->port, role);
+
+		/* Complete pending power role swap */
+		if (!completion_done(&con->complete))
+			complete(&con->complete);
+	}
+
+	if (con->status.change & UCSI_CONSTAT_CONNECT_CHANGE) {
+		typec_set_pwr_role(con->port, role);
+		ucsi_port_psy_changed(con);
+		ucsi_partner_change(con);
+
+		if (con->status.flags & UCSI_CONSTAT_CONNECTED) {
+			ucsi_register_partner(con);
+			ucsi_partner_task(con, ucsi_check_connection, 1, HZ);
+		} else {
+			ucsi_unregister_partner(con);
+		}
+	}
+
+	if (con->status.change & UCSI_CONSTAT_POWER_OPMODE_CHANGE ||
+	    con->status.change & UCSI_CONSTAT_POWER_LEVEL_CHANGE)
+		ucsi_pwr_opmode_change(con);
+
+	if (con->partner && con->status.change & UCSI_CONSTAT_PARTNER_CHANGE) {
+		ucsi_partner_change(con);
+
+		/* Complete pending data role swap */
+		if (!completion_done(&con->complete))
+			complete(&con->complete);
+	}
+
+	if (con->status.change & UCSI_CONSTAT_CAM_CHANGE)
+		ucsi_partner_task(con, ucsi_check_altmodes, 1, 0);
+
+	clear_bit(EVENT_PENDING, &con->ucsi->flags);
+
+	ret = ucsi_acknowledge_connector_change(ucsi);
+	if (ret)
+		dev_err(ucsi->dev, "%s: ACK failed (%d)", __func__, ret);
+
+out_unlock:
+	mutex_unlock(&con->lock);
+}
+
+/**
+ * ucsi_connector_change - Process Connector Change Event
+ * @ucsi: UCSI Interface
+ * @num: Connector number
+ */
+void ucsi_connector_change(struct ucsi *ucsi, u8 num)
+{
+	struct ucsi_connector *con = &ucsi->connector[num - 1];
+
+	if (!(ucsi->ntfy & UCSI_ENABLE_NTFY_CONNECTOR_CHANGE)) {
+		dev_dbg(ucsi->dev, "Bogus connector change event\n");
+		return;
+	}
+
+	if (!test_and_set_bit(EVENT_PENDING, &ucsi->flags))
+		schedule_work(&con->work);
+}
+EXPORT_SYMBOL_GPL(ucsi_connector_change);
+
+/* -------------------------------------------------------------------------- */
+
+static int ucsi_reset_connector(struct ucsi_connector *con, bool hard)
+{
+	u64 command;
+
+	command = UCSI_CONNECTOR_RESET | UCSI_CONNECTOR_NUMBER(con->num);
+	command |= hard ? UCSI_CONNECTOR_RESET_HARD : 0;
+
+	return ucsi_send_command(con->ucsi, command, NULL, 0);
+}
+
+static int ucsi_reset_ppm(struct ucsi *ucsi)
+{
+	u64 command = UCSI_PPM_RESET;
+	unsigned long tmo;
+	u32 cci;
+	int ret;
+
+	mutex_lock(&ucsi->ppm_lock);
+
+	ret = ucsi->ops->async_write(ucsi, UCSI_CONTROL, &command,
+				     sizeof(command));
+	if (ret < 0)
+		goto out;
+
+	tmo = jiffies + msecs_to_jiffies(UCSI_TIMEOUT_MS);
+
+	do {
+		if (time_is_before_jiffies(tmo)) {
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+
+		ret = ucsi->ops->read(ucsi, UCSI_CCI, &cci, sizeof(cci));
+		if (ret)
+			goto out;
+
+		/* If the PPM is still doing something else, reset it again. */
+		if (cci & ~UCSI_CCI_RESET_COMPLETE) {
+			ret = ucsi->ops->async_write(ucsi, UCSI_CONTROL,
+						     &command,
+						     sizeof(command));
+			if (ret < 0)
+				goto out;
+		}
+
+		msleep(20);
+	} while (!(cci & UCSI_CCI_RESET_COMPLETE));
+
+out:
+	mutex_unlock(&ucsi->ppm_lock);
+	return ret;
+}
+
+static int ucsi_role_cmd(struct ucsi_connector *con, u64 command)
+{
+	int ret;
+
+	ret = ucsi_send_command(con->ucsi, command, NULL, 0);
+	if (ret == -ETIMEDOUT) {
+		u64 c;
+
+		/* PPM most likely stopped responding. Resetting everything. */
+		ucsi_reset_ppm(con->ucsi);
+
+		c = UCSI_SET_NOTIFICATION_ENABLE | con->ucsi->ntfy;
+		ucsi_send_command(con->ucsi, c, NULL, 0);
+
+		ucsi_reset_connector(con, true);
+	}
+
+	return ret;
+}
+
+static int ucsi_dr_swap(struct typec_port *port, enum typec_data_role role)
+{
+	struct ucsi_connector *con = typec_get_drvdata(port);
+	u8 partner_type;
+	u64 command;
+	int ret = 0;
+
+	mutex_lock(&con->lock);
+
+	if (!con->partner) {
+		ret = -ENOTCONN;
+		goto out_unlock;
+	}
+
+	partner_type = UCSI_CONSTAT_PARTNER_TYPE(con->status.flags);
+	if ((partner_type == UCSI_CONSTAT_PARTNER_TYPE_DFP &&
+	     role == TYPEC_DEVICE) ||
+	    (partner_type == UCSI_CONSTAT_PARTNER_TYPE_UFP &&
+	     role == TYPEC_HOST))
+		goto out_unlock;
+
+	reinit_completion(&con->complete);
+
+	command = UCSI_SET_UOR | UCSI_CONNECTOR_NUMBER(con->num);
+	command |= UCSI_SET_UOR_ROLE(role);
+	command |= UCSI_SET_UOR_ACCEPT_ROLE_SWAPS;
+	ret = ucsi_role_cmd(con, command);
+	if (ret < 0)
+		goto out_unlock;
+
+	mutex_unlock(&con->lock);
+
+	if (!wait_for_completion_timeout(&con->complete,
+					 msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
+		return -ETIMEDOUT;
+
+	return 0;
+
+out_unlock:
+	mutex_unlock(&con->lock);
+
+	return ret;
+}
+
+static int ucsi_pr_swap(struct typec_port *port, enum typec_role role)
+{
+	struct ucsi_connector *con = typec_get_drvdata(port);
+	enum typec_role cur_role;
+	u64 command;
+	int ret = 0;
+
+	mutex_lock(&con->lock);
+
+	if (!con->partner) {
+		ret = -ENOTCONN;
+		goto out_unlock;
+	}
+
+	cur_role = !!(con->status.flags & UCSI_CONSTAT_PWR_DIR);
+
+	if (cur_role == role)
+		goto out_unlock;
+
+	reinit_completion(&con->complete);
+
+	command = UCSI_SET_PDR | UCSI_CONNECTOR_NUMBER(con->num);
+	command |= UCSI_SET_PDR_ROLE(role);
+	command |= UCSI_SET_PDR_ACCEPT_ROLE_SWAPS;
+	ret = ucsi_role_cmd(con, command);
+	if (ret < 0)
+		goto out_unlock;
+
+	mutex_unlock(&con->lock);
+
+	if (!wait_for_completion_timeout(&con->complete,
+					 msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
+		return -ETIMEDOUT;
+
+	mutex_lock(&con->lock);
+
+	/* Something has gone wrong while swapping the role */
+	if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) !=
+	    UCSI_CONSTAT_PWR_OPMODE_PD) {
+		ucsi_reset_connector(con, true);
+		ret = -EPROTO;
+	}
+
+out_unlock:
+	mutex_unlock(&con->lock);
+
+	return ret;
+}
+
+static const struct typec_operations ucsi_ops = {
+	.dr_set = ucsi_dr_swap,
+	.pr_set = ucsi_pr_swap
+};
+
+/* Caller must call fwnode_handle_put() after use */
+static struct fwnode_handle *ucsi_find_fwnode(struct ucsi_connector *con)
+{
+	struct fwnode_handle *fwnode;
+	int i = 1;
+
+	device_for_each_child_node(con->ucsi->dev, fwnode)
+		if (i++ == con->num)
+			return fwnode;
+	return NULL;
+}
+
+static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
+{
+	struct typec_capability *cap = &con->typec_cap;
+	enum typec_accessory *accessory = cap->accessory;
+	enum usb_role u_role = USB_ROLE_NONE;
+	u64 command;
+	char *name;
+	int ret;
+
+	name = kasprintf(GFP_KERNEL, "%s-con%d", dev_name(ucsi->dev), con->num);
+	if (!name)
+		return -ENOMEM;
+
+	con->wq = create_singlethread_workqueue(name);
+	kfree(name);
+	if (!con->wq)
+		return -ENOMEM;
+
+	INIT_WORK(&con->work, ucsi_handle_connector_change);
+	init_completion(&con->complete);
+	mutex_init(&con->lock);
+	INIT_LIST_HEAD(&con->partner_tasks);
+	con->ucsi = ucsi;
+
+	cap->fwnode = ucsi_find_fwnode(con);
+	con->usb_role_sw = fwnode_usb_role_switch_get(cap->fwnode);
+	if (IS_ERR(con->usb_role_sw))
+		return dev_err_probe(ucsi->dev, PTR_ERR(con->usb_role_sw),
+			"con%d: failed to get usb role switch\n", con->num);
+
+	/* Delay other interactions with the con until registration is complete */
+	mutex_lock(&con->lock);
+
+	/* Get connector capability */
+	command = UCSI_GET_CONNECTOR_CAPABILITY;
+	command |= UCSI_CONNECTOR_NUMBER(con->num);
+	ret = ucsi_send_command(ucsi, command, &con->cap, sizeof(con->cap));
+	if (ret < 0)
+		goto out_unlock;
+
+	if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DRP)
+		cap->data = TYPEC_PORT_DRD;
+	else if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DFP)
+		cap->data = TYPEC_PORT_DFP;
+	else if (con->cap.op_mode & UCSI_CONCAP_OPMODE_UFP)
+		cap->data = TYPEC_PORT_UFP;
+
+	if ((con->cap.flags & UCSI_CONCAP_FLAG_PROVIDER) &&
+	    (con->cap.flags & UCSI_CONCAP_FLAG_CONSUMER))
+		cap->type = TYPEC_PORT_DRP;
+	else if (con->cap.flags & UCSI_CONCAP_FLAG_PROVIDER)
+		cap->type = TYPEC_PORT_SRC;
+	else if (con->cap.flags & UCSI_CONCAP_FLAG_CONSUMER)
+		cap->type = TYPEC_PORT_SNK;
+
+	cap->revision = ucsi->cap.typec_version;
+	cap->pd_revision = ucsi->cap.pd_version;
+	cap->svdm_version = SVDM_VER_2_0;
+	cap->prefer_role = TYPEC_NO_PREFERRED_ROLE;
+
+	if (con->cap.op_mode & UCSI_CONCAP_OPMODE_AUDIO_ACCESSORY)
+		*accessory++ = TYPEC_ACCESSORY_AUDIO;
+	if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DEBUG_ACCESSORY)
+		*accessory = TYPEC_ACCESSORY_DEBUG;
+
+	cap->driver_data = con;
+	cap->ops = &ucsi_ops;
+
+	ret = ucsi_register_port_psy(con);
+	if (ret)
+		goto out;
+
+	/* Register the connector */
+	con->port = typec_register_port(ucsi->dev, cap);
+	if (IS_ERR(con->port)) {
+		ret = PTR_ERR(con->port);
+		goto out;
+	}
+
+	/* Alternate modes */
+	ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_CON);
+	if (ret) {
+		dev_err(ucsi->dev, "con%d: failed to register alt modes\n",
+			con->num);
+		goto out;
+	}
+
+	/* Get the status */
+	command = UCSI_GET_CONNECTOR_STATUS | UCSI_CONNECTOR_NUMBER(con->num);
+	ret = ucsi_send_command(ucsi, command, &con->status, sizeof(con->status));
+	if (ret < 0) {
+		dev_err(ucsi->dev, "con%d: failed to get status\n", con->num);
+		ret = 0;
+		goto out;
+	}
+	ret = 0; /* ucsi_send_command() returns length on success */
+
+	switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) {
+	case UCSI_CONSTAT_PARTNER_TYPE_UFP:
+	case UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP:
+		u_role = USB_ROLE_HOST;
+		fallthrough;
+	case UCSI_CONSTAT_PARTNER_TYPE_CABLE:
+		typec_set_data_role(con->port, TYPEC_HOST);
+		break;
+	case UCSI_CONSTAT_PARTNER_TYPE_DFP:
+		u_role = USB_ROLE_DEVICE;
+		typec_set_data_role(con->port, TYPEC_DEVICE);
+		break;
+	default:
+		break;
+	}
+
+	/* Check if there is already something connected */
+	if (con->status.flags & UCSI_CONSTAT_CONNECTED) {
+		typec_set_pwr_role(con->port,
+				  !!(con->status.flags & UCSI_CONSTAT_PWR_DIR));
+		ucsi_pwr_opmode_change(con);
+		ucsi_register_partner(con);
+		ucsi_port_psy_changed(con);
+	}
+
+	/* Only notify USB controller if partner supports USB data */
+	if (!(UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) & UCSI_CONSTAT_PARTNER_FLAG_USB))
+		u_role = USB_ROLE_NONE;
+
+	ret = usb_role_switch_set_role(con->usb_role_sw, u_role);
+	if (ret) {
+		dev_err(ucsi->dev, "con:%d: failed to set usb role:%d\n",
+			con->num, u_role);
+		ret = 0;
+	}
+
+	if (con->partner &&
+	    UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
+	    UCSI_CONSTAT_PWR_OPMODE_PD) {
+		ucsi_get_src_pdos(con);
+		ucsi_check_altmodes(con);
+	}
+
+	trace_ucsi_register_port(con->num, &con->status);
+
+out:
+	fwnode_handle_put(cap->fwnode);
+out_unlock:
+	mutex_unlock(&con->lock);
+
+	if (ret && con->wq) {
+		destroy_workqueue(con->wq);
+		con->wq = NULL;
+	}
+
+	return ret;
+}
+
+/**
+ * ucsi_init - Initialize UCSI interface
+ * @ucsi: UCSI to be initialized
+ *
+ * Registers all ports @ucsi has and enables all notification events.
+ */
+static int ucsi_init(struct ucsi *ucsi)
+{
+	struct ucsi_connector *con, *connector;
+	u64 command, ntfy;
+	int ret;
+	int i;
+
+	/* Reset the PPM */
+	ret = ucsi_reset_ppm(ucsi);
+	if (ret) {
+		dev_err(ucsi->dev, "failed to reset PPM!\n");
+		goto err;
+	}
+
+	/* Enable basic notifications */
+	ntfy = UCSI_ENABLE_NTFY_CMD_COMPLETE | UCSI_ENABLE_NTFY_ERROR;
+	command = UCSI_SET_NOTIFICATION_ENABLE | ntfy;
+	ret = ucsi_send_command(ucsi, command, NULL, 0);
+	if (ret < 0)
+		goto err_reset;
+
+	/* Get PPM capabilities */
+	command = UCSI_GET_CAPABILITY;
+	ret = ucsi_send_command(ucsi, command, &ucsi->cap, sizeof(ucsi->cap));
+	if (ret < 0)
+		goto err_reset;
+
+	if (!ucsi->cap.num_connectors) {
+		ret = -ENODEV;
+		goto err_reset;
+	}
+
+	/* Allocate the connectors. Released in ucsi_unregister() */
+	connector = kcalloc(ucsi->cap.num_connectors + 1, sizeof(*connector), GFP_KERNEL);
+	if (!connector) {
+		ret = -ENOMEM;
+		goto err_reset;
+	}
+
+	/* Register all connectors */
+	for (i = 0; i < ucsi->cap.num_connectors; i++) {
+		connector[i].num = i + 1;
+		ret = ucsi_register_port(ucsi, &connector[i]);
+		if (ret)
+			goto err_unregister;
+	}
+
+	/* Enable all notifications */
+	ntfy = UCSI_ENABLE_NTFY_ALL;
+	command = UCSI_SET_NOTIFICATION_ENABLE | ntfy;
+	ret = ucsi_send_command(ucsi, command, NULL, 0);
+	if (ret < 0)
+		goto err_unregister;
+
+	ucsi->connector = connector;
+	ucsi->ntfy = ntfy;
+	return 0;
+
+err_unregister:
+	for (con = connector; con->port; con++) {
+		ucsi_unregister_partner(con);
+		ucsi_unregister_altmodes(con, UCSI_RECIPIENT_CON);
+		ucsi_unregister_port_psy(con);
+		if (con->wq)
+			destroy_workqueue(con->wq);
+		typec_unregister_port(con->port);
+		con->port = NULL;
+	}
+	kfree(connector);
+err_reset:
+	memset(&ucsi->cap, 0, sizeof(ucsi->cap));
+	ucsi_reset_ppm(ucsi);
+err:
+	return ret;
+}
+
+static void ucsi_resume_work(struct work_struct *work)
+{
+	struct ucsi *ucsi = container_of(work, struct ucsi, resume_work);
+	struct ucsi_connector *con;
+	u64 command;
+	int ret;
+
+	/* Restore UCSI notification enable mask after system resume */
+	command = UCSI_SET_NOTIFICATION_ENABLE | ucsi->ntfy;
+	ret = ucsi_send_command(ucsi, command, NULL, 0);
+	if (ret < 0) {
+		dev_err(ucsi->dev, "failed to re-enable notifications (%d)\n", ret);
+		return;
+	}
+
+	for (con = ucsi->connector; con->port; con++) {
+		mutex_lock(&con->lock);
+		ucsi_partner_task(con, ucsi_check_connection, 1, 0);
+		mutex_unlock(&con->lock);
+	}
+}
+
+int ucsi_resume(struct ucsi *ucsi)
+{
+	if (ucsi->connector)
+		queue_work(system_long_wq, &ucsi->resume_work);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ucsi_resume);
+
+static void ucsi_init_work(struct work_struct *work)
+{
+	struct ucsi *ucsi = container_of(work, struct ucsi, work.work);
+	int ret;
+
+	ret = ucsi_init(ucsi);
+	if (ret)
+		dev_err(ucsi->dev, "PPM init failed (%d)\n", ret);
+
+	if (ret == -EPROBE_DEFER) {
+		if (ucsi->work_count++ > UCSI_ROLE_SWITCH_WAIT_COUNT)
+			return;
+
+		queue_delayed_work(system_long_wq, &ucsi->work,
+				   UCSI_ROLE_SWITCH_INTERVAL);
+	}
+}
+
+/**
+ * ucsi_get_drvdata - Return private driver data pointer
+ * @ucsi: UCSI interface
+ */
+void *ucsi_get_drvdata(struct ucsi *ucsi)
+{
+	return ucsi->driver_data;
+}
+EXPORT_SYMBOL_GPL(ucsi_get_drvdata);
+
+/**
+ * ucsi_set_drvdata - Assign private driver data pointer
+ * @ucsi: UCSI interface
+ * @data: Private data pointer
+ */
+void ucsi_set_drvdata(struct ucsi *ucsi, void *data)
+{
+	ucsi->driver_data = data;
+}
+EXPORT_SYMBOL_GPL(ucsi_set_drvdata);
+
+/**
+ * ucsi_create - Allocate UCSI instance
+ * @dev: Device interface to the PPM (Platform Policy Manager)
+ * @ops: I/O routines
+ */
+struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops)
+{
+	struct ucsi *ucsi;
+
+	if (!ops || !ops->read || !ops->sync_write || !ops->async_write)
+		return ERR_PTR(-EINVAL);
+
+	ucsi = kzalloc(sizeof(*ucsi), GFP_KERNEL);
+	if (!ucsi)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_WORK(&ucsi->resume_work, ucsi_resume_work);
+	INIT_DELAYED_WORK(&ucsi->work, ucsi_init_work);
+	mutex_init(&ucsi->ppm_lock);
+	ucsi->dev = dev;
+	ucsi->ops = ops;
+
+	return ucsi;
+}
+EXPORT_SYMBOL_GPL(ucsi_create);
+
+/**
+ * ucsi_destroy - Free UCSI instance
+ * @ucsi: UCSI instance to be freed
+ */
+void ucsi_destroy(struct ucsi *ucsi)
+{
+	kfree(ucsi);
+}
+EXPORT_SYMBOL_GPL(ucsi_destroy);
+
+/**
+ * ucsi_register - Register UCSI interface
+ * @ucsi: UCSI instance
+ */
+int ucsi_register(struct ucsi *ucsi)
+{
+	int ret;
+
+	ret = ucsi->ops->read(ucsi, UCSI_VERSION, &ucsi->version,
+			      sizeof(ucsi->version));
+	if (ret)
+		return ret;
+
+	if (!ucsi->version)
+		return -ENODEV;
+
+	queue_delayed_work(system_long_wq, &ucsi->work, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ucsi_register);
+
+/**
+ * ucsi_unregister - Unregister UCSI interface
+ * @ucsi: UCSI interface to be unregistered
+ *
+ * Unregister UCSI interface that was created with ucsi_register().
+ */
+void ucsi_unregister(struct ucsi *ucsi)
+{
+	u64 cmd = UCSI_SET_NOTIFICATION_ENABLE;
+	int i;
+
+	/* Make sure that we are not in the middle of driver initialization */
+	cancel_delayed_work_sync(&ucsi->work);
+	cancel_work_sync(&ucsi->resume_work);
+
+	/* Disable notifications */
+	ucsi->ops->async_write(ucsi, UCSI_CONTROL, &cmd, sizeof(cmd));
+
+	if (!ucsi->connector)
+		return;
+
+	for (i = 0; i < ucsi->cap.num_connectors; i++) {
+		cancel_work_sync(&ucsi->connector[i].work);
+		ucsi_unregister_partner(&ucsi->connector[i]);
+		ucsi_unregister_altmodes(&ucsi->connector[i],
+					 UCSI_RECIPIENT_CON);
+		ucsi_unregister_port_psy(&ucsi->connector[i]);
+
+		if (ucsi->connector[i].wq) {
+			struct ucsi_work *uwork;
+
+			mutex_lock(&ucsi->connector[i].lock);
+			/*
+			 * queue delayed items immediately so they can execute
+			 * and free themselves before the wq is destroyed
+			 */
+			list_for_each_entry(uwork, &ucsi->connector[i].partner_tasks, node)
+				mod_delayed_work(ucsi->connector[i].wq, &uwork->work, 0);
+			mutex_unlock(&ucsi->connector[i].lock);
+			destroy_workqueue(ucsi->connector[i].wq);
+		}
+		typec_unregister_port(ucsi->connector[i].port);
+	}
+
+	kfree(ucsi->connector);
+}
+EXPORT_SYMBOL_GPL(ucsi_unregister);
+
+MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("USB Type-C Connector System Software Interface driver");
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
new file mode 100644
index 000000000..60ce9fb6e
--- /dev/null
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -0,0 +1,390 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __DRIVER_USB_TYPEC_UCSI_H
+#define __DRIVER_USB_TYPEC_UCSI_H
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/power_supply.h>
+#include <linux/types.h>
+#include <linux/usb/typec.h>
+#include <linux/usb/pd.h>
+#include <linux/usb/role.h>
+
+/* -------------------------------------------------------------------------- */
+
+struct ucsi;
+struct ucsi_altmode;
+
+/* UCSI offsets (Bytes) */
+#define UCSI_VERSION			0
+#define UCSI_CCI			4
+#define UCSI_CONTROL			8
+#define UCSI_MESSAGE_IN			16
+#define UCSI_MESSAGE_OUT		32
+
+/* Command Status and Connector Change Indication (CCI) bits */
+#define UCSI_CCI_CONNECTOR(_c_)		(((_c_) & GENMASK(7, 1)) >> 1)
+#define UCSI_CCI_LENGTH(_c_)		(((_c_) & GENMASK(15, 8)) >> 8)
+#define UCSI_CCI_NOT_SUPPORTED		BIT(25)
+#define UCSI_CCI_CANCEL_COMPLETE	BIT(26)
+#define UCSI_CCI_RESET_COMPLETE		BIT(27)
+#define UCSI_CCI_BUSY			BIT(28)
+#define UCSI_CCI_ACK_COMPLETE		BIT(29)
+#define UCSI_CCI_ERROR			BIT(30)
+#define UCSI_CCI_COMMAND_COMPLETE	BIT(31)
+
+/**
+ * struct ucsi_operations - UCSI I/O operations
+ * @read: Read operation
+ * @sync_write: Blocking write operation
+ * @async_write: Non-blocking write operation
+ * @update_altmodes: Squashes duplicate DP altmodes
+ *
+ * Read and write routines for UCSI interface. @sync_write must wait for the
+ * Command Completion Event from the PPM before returning, and @async_write must
+ * return immediately after sending the data to the PPM.
+ */
+struct ucsi_operations {
+	int (*read)(struct ucsi *ucsi, unsigned int offset,
+		    void *val, size_t val_len);
+	int (*sync_write)(struct ucsi *ucsi, unsigned int offset,
+			  const void *val, size_t val_len);
+	int (*async_write)(struct ucsi *ucsi, unsigned int offset,
+			   const void *val, size_t val_len);
+	bool (*update_altmodes)(struct ucsi *ucsi, struct ucsi_altmode *orig,
+				struct ucsi_altmode *updated);
+};
+
+struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops);
+void ucsi_destroy(struct ucsi *ucsi);
+int ucsi_register(struct ucsi *ucsi);
+void ucsi_unregister(struct ucsi *ucsi);
+void *ucsi_get_drvdata(struct ucsi *ucsi);
+void ucsi_set_drvdata(struct ucsi *ucsi, void *data);
+
+void ucsi_connector_change(struct ucsi *ucsi, u8 num);
+
+/* -------------------------------------------------------------------------- */
+
+/* Commands */
+#define UCSI_PPM_RESET			0x01
+#define UCSI_CANCEL			0x02
+#define UCSI_CONNECTOR_RESET		0x03
+#define UCSI_ACK_CC_CI			0x04
+#define UCSI_SET_NOTIFICATION_ENABLE	0x05
+#define UCSI_GET_CAPABILITY		0x06
+#define UCSI_GET_CONNECTOR_CAPABILITY	0x07
+#define UCSI_SET_UOM			0x08
+#define UCSI_SET_UOR			0x09
+#define UCSI_SET_PDM			0x0a
+#define UCSI_SET_PDR			0x0b
+#define UCSI_GET_ALTERNATE_MODES	0x0c
+#define UCSI_GET_CAM_SUPPORTED		0x0d
+#define UCSI_GET_CURRENT_CAM		0x0e
+#define UCSI_SET_NEW_CAM		0x0f
+#define UCSI_GET_PDOS			0x10
+#define UCSI_GET_CABLE_PROPERTY		0x11
+#define UCSI_GET_CONNECTOR_STATUS	0x12
+#define UCSI_GET_ERROR_STATUS		0x13
+
+#define UCSI_CONNECTOR_NUMBER(_num_)		((u64)(_num_) << 16)
+#define UCSI_COMMAND(_cmd_)			((_cmd_) & 0xff)
+
+/* CONNECTOR_RESET command bits */
+#define UCSI_CONNECTOR_RESET_HARD		BIT(23) /* Deprecated in v1.1 */
+
+/* ACK_CC_CI bits */
+#define UCSI_ACK_CONNECTOR_CHANGE		BIT(16)
+#define UCSI_ACK_COMMAND_COMPLETE		BIT(17)
+
+/* SET_NOTIFICATION_ENABLE command bits */
+#define UCSI_ENABLE_NTFY_CMD_COMPLETE		BIT(16)
+#define UCSI_ENABLE_NTFY_EXT_PWR_SRC_CHANGE	BIT(17)
+#define UCSI_ENABLE_NTFY_PWR_OPMODE_CHANGE	BIT(18)
+#define UCSI_ENABLE_NTFY_CAP_CHANGE		BIT(21)
+#define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE	BIT(22)
+#define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE	BIT(23)
+#define UCSI_ENABLE_NTFY_CAM_CHANGE		BIT(24)
+#define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE	BIT(25)
+#define UCSI_ENABLE_NTFY_PARTNER_CHANGE		BIT(27)
+#define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE		BIT(28)
+#define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE	BIT(30)
+#define UCSI_ENABLE_NTFY_ERROR			BIT(31)
+#define UCSI_ENABLE_NTFY_ALL			0xdbe70000
+
+/* SET_UOR command bits */
+#define UCSI_SET_UOR_ROLE(_r_)		(((_r_) == TYPEC_HOST ? 1 : 2) << 23)
+#define UCSI_SET_UOR_ACCEPT_ROLE_SWAPS		BIT(25)
+
+/* SET_PDF command bits */
+#define UCSI_SET_PDR_ROLE(_r_)		(((_r_) == TYPEC_SOURCE ? 1 : 2) << 23)
+#define UCSI_SET_PDR_ACCEPT_ROLE_SWAPS		BIT(25)
+
+/* GET_ALTERNATE_MODES command bits */
+#define UCSI_ALTMODE_RECIPIENT(_r_)		(((_r_) >> 16) & 0x7)
+#define UCSI_GET_ALTMODE_RECIPIENT(_r_)		((u64)(_r_) << 16)
+#define   UCSI_RECIPIENT_CON			0
+#define   UCSI_RECIPIENT_SOP			1
+#define   UCSI_RECIPIENT_SOP_P			2
+#define   UCSI_RECIPIENT_SOP_PP			3
+#define UCSI_GET_ALTMODE_CONNECTOR_NUMBER(_r_)	((u64)(_r_) << 24)
+#define UCSI_ALTMODE_OFFSET(_r_)		(((_r_) >> 32) & 0xff)
+#define UCSI_GET_ALTMODE_OFFSET(_r_)		((u64)(_r_) << 32)
+#define UCSI_GET_ALTMODE_NUM_ALTMODES(_r_)	((u64)(_r_) << 40)
+
+/* GET_PDOS command bits */
+#define UCSI_GET_PDOS_PARTNER_PDO(_r_)		((u64)(_r_) << 23)
+#define UCSI_GET_PDOS_PDO_OFFSET(_r_)		((u64)(_r_) << 24)
+#define UCSI_GET_PDOS_NUM_PDOS(_r_)		((u64)(_r_) << 32)
+#define UCSI_MAX_PDOS				(4)
+#define UCSI_GET_PDOS_SRC_PDOS			((u64)1 << 34)
+
+/* -------------------------------------------------------------------------- */
+
+/* Error information returned by PPM in response to GET_ERROR_STATUS command. */
+#define UCSI_ERROR_UNREGONIZED_CMD		BIT(0)
+#define UCSI_ERROR_INVALID_CON_NUM		BIT(1)
+#define UCSI_ERROR_INVALID_CMD_ARGUMENT		BIT(2)
+#define UCSI_ERROR_INCOMPATIBLE_PARTNER		BIT(3)
+#define UCSI_ERROR_CC_COMMUNICATION_ERR		BIT(4)
+#define UCSI_ERROR_DEAD_BATTERY			BIT(5)
+#define UCSI_ERROR_CONTRACT_NEGOTIATION_FAIL	BIT(6)
+#define UCSI_ERROR_OVERCURRENT			BIT(7)
+#define UCSI_ERROR_UNDEFINED			BIT(8)
+#define UCSI_ERROR_PARTNER_REJECTED_SWAP	BIT(9)
+#define UCSI_ERROR_HARD_RESET			BIT(10)
+#define UCSI_ERROR_PPM_POLICY_CONFLICT		BIT(11)
+#define UCSI_ERROR_SWAP_REJECTED		BIT(12)
+
+#define UCSI_SET_NEW_CAM_ENTER(x)		(((x) >> 23) & 0x1)
+#define UCSI_SET_NEW_CAM_GET_AM(x)		(((x) >> 24) & 0xff)
+#define UCSI_SET_NEW_CAM_AM_MASK		(0xff << 24)
+#define UCSI_SET_NEW_CAM_SET_AM(x)		(((x) & 0xff) << 24)
+#define UCSI_CMD_CONNECTOR_MASK			(0x7)
+
+/* Data structure filled by PPM in response to GET_CAPABILITY command. */
+struct ucsi_capability {
+	u32 attributes;
+#define UCSI_CAP_ATTR_DISABLE_STATE		BIT(0)
+#define UCSI_CAP_ATTR_BATTERY_CHARGING		BIT(1)
+#define UCSI_CAP_ATTR_USB_PD			BIT(2)
+#define UCSI_CAP_ATTR_TYPEC_CURRENT		BIT(6)
+#define UCSI_CAP_ATTR_POWER_AC_SUPPLY		BIT(8)
+#define UCSI_CAP_ATTR_POWER_OTHER		BIT(10)
+#define UCSI_CAP_ATTR_POWER_VBUS		BIT(14)
+	u8 num_connectors;
+	u8 features;
+#define UCSI_CAP_SET_UOM			BIT(0)
+#define UCSI_CAP_SET_PDM			BIT(1)
+#define UCSI_CAP_ALT_MODE_DETAILS		BIT(2)
+#define UCSI_CAP_ALT_MODE_OVERRIDE		BIT(3)
+#define UCSI_CAP_PDO_DETAILS			BIT(4)
+#define UCSI_CAP_CABLE_DETAILS			BIT(5)
+#define UCSI_CAP_EXT_SUPPLY_NOTIFICATIONS	BIT(6)
+#define UCSI_CAP_PD_RESET			BIT(7)
+	u16 reserved_1;
+	u8 num_alt_modes;
+	u8 reserved_2;
+	u16 bc_version;
+	u16 pd_version;
+	u16 typec_version;
+} __packed;
+
+/* Data structure filled by PPM in response to GET_CONNECTOR_CAPABILITY cmd. */
+struct ucsi_connector_capability {
+	u8 op_mode;
+#define UCSI_CONCAP_OPMODE_DFP			BIT(0)
+#define UCSI_CONCAP_OPMODE_UFP			BIT(1)
+#define UCSI_CONCAP_OPMODE_DRP			BIT(2)
+#define UCSI_CONCAP_OPMODE_AUDIO_ACCESSORY	BIT(3)
+#define UCSI_CONCAP_OPMODE_DEBUG_ACCESSORY	BIT(4)
+#define UCSI_CONCAP_OPMODE_USB2			BIT(5)
+#define UCSI_CONCAP_OPMODE_USB3			BIT(6)
+#define UCSI_CONCAP_OPMODE_ALT_MODE		BIT(7)
+	u8 flags;
+#define UCSI_CONCAP_FLAG_PROVIDER		BIT(0)
+#define UCSI_CONCAP_FLAG_CONSUMER		BIT(1)
+} __packed;
+
+struct ucsi_altmode {
+	u16 svid;
+	u32 mid;
+} __packed;
+
+/* Data structure filled by PPM in response to GET_CABLE_PROPERTY command. */
+struct ucsi_cable_property {
+	u16 speed_supported;
+	u8 current_capability;
+	u8 flags;
+#define UCSI_CABLE_PROP_FLAG_VBUS_IN_CABLE	BIT(0)
+#define UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE	BIT(1)
+#define UCSI_CABLE_PROP_FLAG_DIRECTIONALITY	BIT(2)
+#define UCSI_CABLE_PROP_FLAG_PLUG_TYPE(_f_)	((_f_) & GENMASK(3, 0))
+#define   UCSI_CABLE_PROPERTY_PLUG_TYPE_A	0
+#define   UCSI_CABLE_PROPERTY_PLUG_TYPE_B	1
+#define   UCSI_CABLE_PROPERTY_PLUG_TYPE_C	2
+#define   UCSI_CABLE_PROPERTY_PLUG_OTHER	3
+#define UCSI_CABLE_PROP_MODE_SUPPORT		BIT(5)
+	u8 latency;
+} __packed;
+
+/* Data structure filled by PPM in response to GET_CONNECTOR_STATUS command. */
+struct ucsi_connector_status {
+	u16 change;
+#define UCSI_CONSTAT_EXT_SUPPLY_CHANGE		BIT(1)
+#define UCSI_CONSTAT_POWER_OPMODE_CHANGE	BIT(2)
+#define UCSI_CONSTAT_PDOS_CHANGE		BIT(5)
+#define UCSI_CONSTAT_POWER_LEVEL_CHANGE		BIT(6)
+#define UCSI_CONSTAT_PD_RESET_COMPLETE		BIT(7)
+#define UCSI_CONSTAT_CAM_CHANGE			BIT(8)
+#define UCSI_CONSTAT_BC_CHANGE			BIT(9)
+#define UCSI_CONSTAT_PARTNER_CHANGE		BIT(11)
+#define UCSI_CONSTAT_POWER_DIR_CHANGE		BIT(12)
+#define UCSI_CONSTAT_CONNECT_CHANGE		BIT(14)
+#define UCSI_CONSTAT_ERROR			BIT(15)
+	u16 flags;
+#define UCSI_CONSTAT_PWR_OPMODE(_f_)		((_f_) & GENMASK(2, 0))
+#define   UCSI_CONSTAT_PWR_OPMODE_NONE		0
+#define   UCSI_CONSTAT_PWR_OPMODE_DEFAULT	1
+#define   UCSI_CONSTAT_PWR_OPMODE_BC		2
+#define   UCSI_CONSTAT_PWR_OPMODE_PD		3
+#define   UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5	4
+#define   UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0	5
+#define UCSI_CONSTAT_CONNECTED			BIT(3)
+#define UCSI_CONSTAT_PWR_DIR			BIT(4)
+#define UCSI_CONSTAT_PARTNER_FLAGS(_f_)		(((_f_) & GENMASK(12, 5)) >> 5)
+#define   UCSI_CONSTAT_PARTNER_FLAG_USB		1
+#define   UCSI_CONSTAT_PARTNER_FLAG_ALT_MODE	2
+#define UCSI_CONSTAT_PARTNER_TYPE(_f_)		(((_f_) & GENMASK(15, 13)) >> 13)
+#define   UCSI_CONSTAT_PARTNER_TYPE_DFP		1
+#define   UCSI_CONSTAT_PARTNER_TYPE_UFP		2
+#define   UCSI_CONSTAT_PARTNER_TYPE_CABLE	3 /* Powered Cable */
+#define   UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP	4 /* Powered Cable */
+#define   UCSI_CONSTAT_PARTNER_TYPE_DEBUG	5
+#define   UCSI_CONSTAT_PARTNER_TYPE_AUDIO	6
+	u32 request_data_obj;
+	u8 pwr_status;
+#define UCSI_CONSTAT_BC_STATUS(_p_)		((_p_) & GENMASK(2, 0))
+#define   UCSI_CONSTAT_BC_NOT_CHARGING		0
+#define   UCSI_CONSTAT_BC_NOMINAL_CHARGING	1
+#define   UCSI_CONSTAT_BC_SLOW_CHARGING		2
+#define   UCSI_CONSTAT_BC_TRICKLE_CHARGING	3
+#define UCSI_CONSTAT_PROVIDER_CAP_LIMIT(_p_)	(((_p_) & GENMASK(6, 3)) >> 3)
+#define   UCSI_CONSTAT_CAP_PWR_LOWERED		0
+#define   UCSI_CONSTAT_CAP_PWR_BUDGET_LIMIT	1
+} __packed;
+
+/* -------------------------------------------------------------------------- */
+
+struct ucsi {
+	u16 version;
+	struct device *dev;
+	struct driver_data *driver_data;
+
+	const struct ucsi_operations *ops;
+
+	struct ucsi_capability cap;
+	struct ucsi_connector *connector;
+
+	struct work_struct resume_work;
+	struct delayed_work work;
+	int work_count;
+#define UCSI_ROLE_SWITCH_RETRY_PER_HZ	10
+#define UCSI_ROLE_SWITCH_INTERVAL	(HZ / UCSI_ROLE_SWITCH_RETRY_PER_HZ)
+#define UCSI_ROLE_SWITCH_WAIT_COUNT	(10 * UCSI_ROLE_SWITCH_RETRY_PER_HZ)
+
+	/* PPM Communication lock */
+	struct mutex ppm_lock;
+
+	/* The latest "Notification Enable" bits (SET_NOTIFICATION_ENABLE) */
+	u64 ntfy;
+
+	/* PPM communication flags */
+	unsigned long flags;
+#define EVENT_PENDING	0
+#define COMMAND_PENDING	1
+#define ACK_PENDING	2
+};
+
+#define UCSI_MAX_SVID		5
+#define UCSI_MAX_ALTMODES	(UCSI_MAX_SVID * 6)
+
+#define UCSI_TYPEC_VSAFE5V	5000
+#define UCSI_TYPEC_1_5_CURRENT	1500
+#define UCSI_TYPEC_3_0_CURRENT	3000
+
+struct ucsi_connector {
+	int num;
+
+	struct ucsi *ucsi;
+	struct mutex lock; /* port lock */
+	struct work_struct work;
+	struct completion complete;
+	struct workqueue_struct *wq;
+	struct list_head partner_tasks;
+
+	struct typec_port *port;
+	struct typec_partner *partner;
+
+	struct typec_altmode *port_altmode[UCSI_MAX_ALTMODES];
+	struct typec_altmode *partner_altmode[UCSI_MAX_ALTMODES];
+
+	struct typec_capability typec_cap;
+
+	struct ucsi_connector_status status;
+	struct ucsi_connector_capability cap;
+	struct power_supply *psy;
+	struct power_supply_desc psy_desc;
+	u32 rdo;
+	u32 src_pdos[PDO_MAX_OBJECTS];
+	int num_pdos;
+
+	struct usb_role_switch *usb_role_sw;
+};
+
+int ucsi_send_command(struct ucsi *ucsi, u64 command,
+		      void *retval, size_t size);
+
+void ucsi_altmode_update_active(struct ucsi_connector *con);
+int ucsi_resume(struct ucsi *ucsi);
+
+#if IS_ENABLED(CONFIG_POWER_SUPPLY)
+int ucsi_register_port_psy(struct ucsi_connector *con);
+void ucsi_unregister_port_psy(struct ucsi_connector *con);
+void ucsi_port_psy_changed(struct ucsi_connector *con);
+#else
+static inline int ucsi_register_port_psy(struct ucsi_connector *con) { return 0; }
+static inline void ucsi_unregister_port_psy(struct ucsi_connector *con) { }
+static inline void ucsi_port_psy_changed(struct ucsi_connector *con) { }
+#endif /* CONFIG_POWER_SUPPLY */
+
+#if IS_ENABLED(CONFIG_TYPEC_DP_ALTMODE)
+struct typec_altmode *
+ucsi_register_displayport(struct ucsi_connector *con,
+			  bool override, int offset,
+			  struct typec_altmode_desc *desc);
+
+void ucsi_displayport_remove_partner(struct typec_altmode *adev);
+
+#else
+static inline struct typec_altmode *
+ucsi_register_displayport(struct ucsi_connector *con,
+			  bool override, int offset,
+			  struct typec_altmode_desc *desc)
+{
+	return NULL;
+}
+
+static inline void
+ucsi_displayport_remove_partner(struct typec_altmode *adev) { }
+#endif /* CONFIG_TYPEC_DP_ALTMODE */
+
+/*
+ * NVIDIA VirtualLink (svid 0x955) has two altmode. VirtualLink
+ * DP mode with vdo=0x1 and NVIDIA test mode with vdo=0x3
+ */
+#define USB_TYPEC_NVIDIA_VLINK_DP_VDO	0x1
+#define USB_TYPEC_NVIDIA_VLINK_DBG_VDO	0x3
+
+#endif /* __DRIVER_USB_TYPEC_UCSI_H */
diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c
new file mode 100644
index 000000000..217355f1f
--- /dev/null
+++ b/drivers/usb/typec/ucsi/ucsi_acpi.c
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * UCSI ACPI driver
+ *
+ * Copyright (C) 2017, Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+
+#include "ucsi.h"
+
+#define UCSI_DSM_UUID		"6f8398c2-7ca4-11e4-ad36-631042b5008f"
+#define UCSI_DSM_FUNC_WRITE	1
+#define UCSI_DSM_FUNC_READ	2
+
+struct ucsi_acpi {
+	struct device *dev;
+	struct ucsi *ucsi;
+	void *base;
+	struct completion complete;
+	unsigned long flags;
+	guid_t guid;
+	u64 cmd;
+};
+
+static int ucsi_acpi_dsm(struct ucsi_acpi *ua, int func)
+{
+	union acpi_object *obj;
+
+	obj = acpi_evaluate_dsm(ACPI_HANDLE(ua->dev), &ua->guid, 1, func,
+				NULL);
+	if (!obj) {
+		dev_err(ua->dev, "%s: failed to evaluate _DSM %d\n",
+			__func__, func);
+		return -EIO;
+	}
+
+	ACPI_FREE(obj);
+	return 0;
+}
+
+static int ucsi_acpi_read(struct ucsi *ucsi, unsigned int offset,
+			  void *val, size_t val_len)
+{
+	struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi);
+	int ret;
+
+	ret = ucsi_acpi_dsm(ua, UCSI_DSM_FUNC_READ);
+	if (ret)
+		return ret;
+
+	memcpy(val, ua->base + offset, val_len);
+
+	return 0;
+}
+
+static int ucsi_acpi_async_write(struct ucsi *ucsi, unsigned int offset,
+				 const void *val, size_t val_len)
+{
+	struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi);
+
+	memcpy(ua->base + offset, val, val_len);
+	ua->cmd = *(u64 *)val;
+
+	return ucsi_acpi_dsm(ua, UCSI_DSM_FUNC_WRITE);
+}
+
+static int ucsi_acpi_sync_write(struct ucsi *ucsi, unsigned int offset,
+				const void *val, size_t val_len)
+{
+	struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi);
+	int ret;
+
+	set_bit(COMMAND_PENDING, &ua->flags);
+
+	ret = ucsi_acpi_async_write(ucsi, offset, val, val_len);
+	if (ret)
+		goto out_clear_bit;
+
+	if (!wait_for_completion_timeout(&ua->complete, 5 * HZ))
+		ret = -ETIMEDOUT;
+
+out_clear_bit:
+	clear_bit(COMMAND_PENDING, &ua->flags);
+
+	return ret;
+}
+
+static const struct ucsi_operations ucsi_acpi_ops = {
+	.read = ucsi_acpi_read,
+	.sync_write = ucsi_acpi_sync_write,
+	.async_write = ucsi_acpi_async_write
+};
+
+static int
+ucsi_zenbook_read(struct ucsi *ucsi, unsigned int offset, void *val, size_t val_len)
+{
+	struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi);
+	int ret;
+
+	if (offset == UCSI_VERSION || UCSI_COMMAND(ua->cmd) == UCSI_PPM_RESET) {
+		ret = ucsi_acpi_dsm(ua, UCSI_DSM_FUNC_READ);
+		if (ret)
+			return ret;
+	}
+
+	memcpy(val, ua->base + offset, val_len);
+
+	return 0;
+}
+
+static const struct ucsi_operations ucsi_zenbook_ops = {
+	.read = ucsi_zenbook_read,
+	.sync_write = ucsi_acpi_sync_write,
+	.async_write = ucsi_acpi_async_write
+};
+
+static const struct dmi_system_id zenbook_dmi_id[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UA_UM325UA"),
+		},
+	},
+	{ }
+};
+
+static void ucsi_acpi_notify(acpi_handle handle, u32 event, void *data)
+{
+	struct ucsi_acpi *ua = data;
+	u32 cci;
+	int ret;
+
+	ret = ua->ucsi->ops->read(ua->ucsi, UCSI_CCI, &cci, sizeof(cci));
+	if (ret)
+		return;
+
+	if (UCSI_CCI_CONNECTOR(cci))
+		ucsi_connector_change(ua->ucsi, UCSI_CCI_CONNECTOR(cci));
+
+	if (test_bit(COMMAND_PENDING, &ua->flags) &&
+	    cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))
+		complete(&ua->complete);
+}
+
+static int ucsi_acpi_probe(struct platform_device *pdev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+	const struct ucsi_operations *ops = &ucsi_acpi_ops;
+	struct ucsi_acpi *ua;
+	struct resource *res;
+	acpi_status status;
+	int ret;
+
+	if (adev->dep_unmet)
+		return -EPROBE_DEFER;
+
+	ua = devm_kzalloc(&pdev->dev, sizeof(*ua), GFP_KERNEL);
+	if (!ua)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "missing memory resource\n");
+		return -ENODEV;
+	}
+
+	ua->base = devm_memremap(&pdev->dev, res->start, resource_size(res), MEMREMAP_WB);
+	if (IS_ERR(ua->base))
+		return PTR_ERR(ua->base);
+
+	ret = guid_parse(UCSI_DSM_UUID, &ua->guid);
+	if (ret)
+		return ret;
+
+	init_completion(&ua->complete);
+	ua->dev = &pdev->dev;
+
+	if (dmi_check_system(zenbook_dmi_id))
+		ops = &ucsi_zenbook_ops;
+
+	ua->ucsi = ucsi_create(&pdev->dev, ops);
+	if (IS_ERR(ua->ucsi))
+		return PTR_ERR(ua->ucsi);
+
+	ucsi_set_drvdata(ua->ucsi, ua);
+
+	status = acpi_install_notify_handler(ACPI_HANDLE(&pdev->dev),
+					     ACPI_DEVICE_NOTIFY,
+					     ucsi_acpi_notify, ua);
+	if (ACPI_FAILURE(status)) {
+		dev_err(&pdev->dev, "failed to install notify handler\n");
+		ucsi_destroy(ua->ucsi);
+		return -ENODEV;
+	}
+
+	ret = ucsi_register(ua->ucsi);
+	if (ret) {
+		acpi_remove_notify_handler(ACPI_HANDLE(&pdev->dev),
+					   ACPI_DEVICE_NOTIFY,
+					   ucsi_acpi_notify);
+		ucsi_destroy(ua->ucsi);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, ua);
+
+	return 0;
+}
+
+static int ucsi_acpi_remove(struct platform_device *pdev)
+{
+	struct ucsi_acpi *ua = platform_get_drvdata(pdev);
+
+	ucsi_unregister(ua->ucsi);
+	ucsi_destroy(ua->ucsi);
+
+	acpi_remove_notify_handler(ACPI_HANDLE(&pdev->dev), ACPI_DEVICE_NOTIFY,
+				   ucsi_acpi_notify);
+
+	return 0;
+}
+
+static int ucsi_acpi_resume(struct device *dev)
+{
+	struct ucsi_acpi *ua = dev_get_drvdata(dev);
+
+	return ucsi_resume(ua->ucsi);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(ucsi_acpi_pm_ops, NULL, ucsi_acpi_resume);
+
+static const struct acpi_device_id ucsi_acpi_match[] = {
+	{ "PNP0CA0", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, ucsi_acpi_match);
+
+static struct platform_driver ucsi_acpi_platform_driver = {
+	.driver = {
+		.name = "ucsi_acpi",
+		.pm = pm_ptr(&ucsi_acpi_pm_ops),
+		.acpi_match_table = ACPI_PTR(ucsi_acpi_match),
+	},
+	.probe = ucsi_acpi_probe,
+	.remove = ucsi_acpi_remove,
+};
+
+module_platform_driver(ucsi_acpi_platform_driver);
+
+MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("UCSI ACPI driver");
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
new file mode 100644
index 000000000..835f1c437
--- /dev/null
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -0,0 +1,1494 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * UCSI driver for Cypress CCGx Type-C controller
+ *
+ * Copyright (C) 2017-2018 NVIDIA Corporation. All rights reserved.
+ * Author: Ajay Gupta <ajayg@nvidia.com>
+ *
+ * Some code borrowed from drivers/usb/typec/ucsi/ucsi_acpi.c
+ */
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/usb/typec_dp.h>
+
+#include <asm/unaligned.h>
+#include "ucsi.h"
+
+enum enum_fw_mode {
+	BOOT,   /* bootloader */
+	FW1,    /* FW partition-1 (contains secondary fw) */
+	FW2,    /* FW partition-2 (contains primary fw) */
+	FW_INVALID,
+};
+
+#define CCGX_RAB_DEVICE_MODE			0x0000
+#define CCGX_RAB_INTR_REG			0x0006
+#define  DEV_INT				BIT(0)
+#define  PORT0_INT				BIT(1)
+#define  PORT1_INT				BIT(2)
+#define  UCSI_READ_INT				BIT(7)
+#define CCGX_RAB_JUMP_TO_BOOT			0x0007
+#define  TO_BOOT				'J'
+#define  TO_ALT_FW				'A'
+#define CCGX_RAB_RESET_REQ			0x0008
+#define  RESET_SIG				'R'
+#define  CMD_RESET_I2C				0x0
+#define  CMD_RESET_DEV				0x1
+#define CCGX_RAB_ENTER_FLASHING			0x000A
+#define  FLASH_ENTER_SIG			'P'
+#define CCGX_RAB_VALIDATE_FW			0x000B
+#define CCGX_RAB_FLASH_ROW_RW			0x000C
+#define  FLASH_SIG				'F'
+#define  FLASH_RD_CMD				0x0
+#define  FLASH_WR_CMD				0x1
+#define  FLASH_FWCT1_WR_CMD			0x2
+#define  FLASH_FWCT2_WR_CMD			0x3
+#define  FLASH_FWCT_SIG_WR_CMD			0x4
+#define CCGX_RAB_READ_ALL_VER			0x0010
+#define CCGX_RAB_READ_FW2_VER			0x0020
+#define CCGX_RAB_UCSI_CONTROL			0x0039
+#define CCGX_RAB_UCSI_CONTROL_START		BIT(0)
+#define CCGX_RAB_UCSI_CONTROL_STOP		BIT(1)
+#define CCGX_RAB_UCSI_DATA_BLOCK(offset)	(0xf000 | ((offset) & 0xff))
+#define REG_FLASH_RW_MEM        0x0200
+#define DEV_REG_IDX				CCGX_RAB_DEVICE_MODE
+#define CCGX_RAB_PDPORT_ENABLE			0x002C
+#define  PDPORT_1		BIT(0)
+#define  PDPORT_2		BIT(1)
+#define CCGX_RAB_RESPONSE			0x007E
+#define  ASYNC_EVENT				BIT(7)
+
+/* CCGx events & async msg codes */
+#define RESET_COMPLETE		0x80
+#define EVENT_INDEX		RESET_COMPLETE
+#define PORT_CONNECT_DET	0x84
+#define PORT_DISCONNECT_DET	0x85
+#define ROLE_SWAP_COMPELETE	0x87
+
+/* ccg firmware */
+#define CYACD_LINE_SIZE         527
+#define CCG4_ROW_SIZE           256
+#define FW1_METADATA_ROW        0x1FF
+#define FW2_METADATA_ROW        0x1FE
+#define FW_CFG_TABLE_SIG_SIZE	256
+
+static int secondary_fw_min_ver = 41;
+
+enum enum_flash_mode {
+	SECONDARY_BL,	/* update secondary using bootloader */
+	PRIMARY,	/* update primary using secondary */
+	SECONDARY,	/* update secondary using primary */
+	FLASH_NOT_NEEDED,	/* update not required */
+	FLASH_INVALID,
+};
+
+static const char * const ccg_fw_names[] = {
+	"ccg_boot.cyacd",
+	"ccg_primary.cyacd",
+	"ccg_secondary.cyacd"
+};
+
+struct ccg_dev_info {
+#define CCG_DEVINFO_FWMODE_SHIFT (0)
+#define CCG_DEVINFO_FWMODE_MASK (0x3 << CCG_DEVINFO_FWMODE_SHIFT)
+#define CCG_DEVINFO_PDPORTS_SHIFT (2)
+#define CCG_DEVINFO_PDPORTS_MASK (0x3 << CCG_DEVINFO_PDPORTS_SHIFT)
+	u8 mode;
+	u8 bl_mode;
+	__le16 silicon_id;
+	__le16 bl_last_row;
+} __packed;
+
+struct version_format {
+	__le16 build;
+	u8 patch;
+	u8 ver;
+#define CCG_VERSION_PATCH(x) ((x) << 16)
+#define CCG_VERSION(x)	((x) << 24)
+#define CCG_VERSION_MIN_SHIFT (0)
+#define CCG_VERSION_MIN_MASK (0xf << CCG_VERSION_MIN_SHIFT)
+#define CCG_VERSION_MAJ_SHIFT (4)
+#define CCG_VERSION_MAJ_MASK (0xf << CCG_VERSION_MAJ_SHIFT)
+} __packed;
+
+/*
+ * Firmware version 3.1.10 or earlier, built for NVIDIA has known issue
+ * of missing interrupt when a device is connected for runtime resume
+ */
+#define CCG_FW_BUILD_NVIDIA	(('n' << 8) | 'v')
+#define CCG_OLD_FW_VERSION	(CCG_VERSION(0x31) | CCG_VERSION_PATCH(10))
+
+/* Firmware for Tegra doesn't support UCSI ALT command, built
+ * for NVIDIA has known issue of reporting wrong capability info
+ */
+#define CCG_FW_BUILD_NVIDIA_TEGRA	(('g' << 8) | 'n')
+
+/* Altmode offset for NVIDIA Function Test Board (FTB) */
+#define NVIDIA_FTB_DP_OFFSET	(2)
+#define NVIDIA_FTB_DBG_OFFSET	(3)
+
+struct version_info {
+	struct version_format base;
+	struct version_format app;
+};
+
+struct fw_config_table {
+	u32 identity;
+	u16 table_size;
+	u8 fwct_version;
+	u8 is_key_change;
+	u8 guid[16];
+	struct version_format base;
+	struct version_format app;
+	u8 primary_fw_digest[32];
+	u32 key_exp_length;
+	u8 key_modulus[256];
+	u8 key_exp[4];
+};
+
+/* CCGx response codes */
+enum ccg_resp_code {
+	CMD_NO_RESP             = 0x00,
+	CMD_SUCCESS             = 0x02,
+	FLASH_DATA_AVAILABLE    = 0x03,
+	CMD_INVALID             = 0x05,
+	FLASH_UPDATE_FAIL       = 0x07,
+	INVALID_FW              = 0x08,
+	INVALID_ARG             = 0x09,
+	CMD_NOT_SUPPORT         = 0x0A,
+	TRANSACTION_FAIL        = 0x0C,
+	PD_CMD_FAIL             = 0x0D,
+	UNDEF_ERROR             = 0x0F,
+	INVALID_RESP		= 0x10,
+};
+
+#define CCG_EVENT_MAX	(EVENT_INDEX + 43)
+
+struct ccg_cmd {
+	u16 reg;
+	u32 data;
+	int len;
+	u32 delay; /* ms delay for cmd timeout  */
+};
+
+struct ccg_resp {
+	u8 code;
+	u8 length;
+};
+
+struct ucsi_ccg_altmode {
+	u16 svid;
+	u32 mid;
+	u8 linked_idx;
+	u8 active_idx;
+#define UCSI_MULTI_DP_INDEX	(0xff)
+	bool checked;
+} __packed;
+
+struct ucsi_ccg {
+	struct device *dev;
+	struct ucsi *ucsi;
+	struct i2c_client *client;
+
+	struct ccg_dev_info info;
+	/* version info for boot, primary and secondary */
+	struct version_info version[FW2 + 1];
+	u32 fw_version;
+	/* CCG HPI communication flags */
+	unsigned long flags;
+#define RESET_PENDING	0
+#define DEV_CMD_PENDING	1
+	struct ccg_resp dev_resp;
+	u8 cmd_resp;
+	int port_num;
+	int irq;
+	struct work_struct work;
+	struct mutex lock; /* to sync between user and driver thread */
+
+	/* fw build with vendor information */
+	u16 fw_build;
+	struct work_struct pm_work;
+
+	struct completion complete;
+
+	u64 last_cmd_sent;
+	bool has_multiple_dp;
+	struct ucsi_ccg_altmode orig[UCSI_MAX_ALTMODES];
+	struct ucsi_ccg_altmode updated[UCSI_MAX_ALTMODES];
+};
+
+static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
+{
+	struct i2c_client *client = uc->client;
+	const struct i2c_adapter_quirks *quirks = client->adapter->quirks;
+	unsigned char buf[2];
+	struct i2c_msg msgs[] = {
+		{
+			.addr	= client->addr,
+			.flags  = 0x0,
+			.len	= sizeof(buf),
+			.buf	= buf,
+		},
+		{
+			.addr	= client->addr,
+			.flags  = I2C_M_RD,
+			.buf	= data,
+		},
+	};
+	u32 rlen, rem_len = len, max_read_len = len;
+	int status;
+
+	/* check any max_read_len limitation on i2c adapter */
+	if (quirks && quirks->max_read_len)
+		max_read_len = quirks->max_read_len;
+
+	pm_runtime_get_sync(uc->dev);
+	while (rem_len > 0) {
+		msgs[1].buf = &data[len - rem_len];
+		rlen = min_t(u16, rem_len, max_read_len);
+		msgs[1].len = rlen;
+		put_unaligned_le16(rab, buf);
+		status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+		if (status < 0) {
+			dev_err(uc->dev, "i2c_transfer failed %d\n", status);
+			pm_runtime_put_sync(uc->dev);
+			return status;
+		}
+		rab += rlen;
+		rem_len -= rlen;
+	}
+
+	pm_runtime_put_sync(uc->dev);
+	return 0;
+}
+
+static int ccg_write(struct ucsi_ccg *uc, u16 rab, const u8 *data, u32 len)
+{
+	struct i2c_client *client = uc->client;
+	unsigned char *buf;
+	struct i2c_msg msgs[] = {
+		{
+			.addr	= client->addr,
+			.flags  = 0x0,
+		}
+	};
+	int status;
+
+	buf = kzalloc(len + sizeof(rab), GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	put_unaligned_le16(rab, buf);
+	memcpy(buf + sizeof(rab), data, len);
+
+	msgs[0].len = len + sizeof(rab);
+	msgs[0].buf = buf;
+
+	pm_runtime_get_sync(uc->dev);
+	status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (status < 0) {
+		dev_err(uc->dev, "i2c_transfer failed %d\n", status);
+		pm_runtime_put_sync(uc->dev);
+		kfree(buf);
+		return status;
+	}
+
+	pm_runtime_put_sync(uc->dev);
+	kfree(buf);
+	return 0;
+}
+
+static int ucsi_ccg_init(struct ucsi_ccg *uc)
+{
+	unsigned int count = 10;
+	u8 data;
+	int status;
+
+	data = CCGX_RAB_UCSI_CONTROL_STOP;
+	status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data));
+	if (status < 0)
+		return status;
+
+	data = CCGX_RAB_UCSI_CONTROL_START;
+	status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data));
+	if (status < 0)
+		return status;
+
+	/*
+	 * Flush CCGx RESPONSE queue by acking interrupts. Above ucsi control
+	 * register write will push response which must be cleared.
+	 */
+	do {
+		status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
+		if (status < 0)
+			return status;
+
+		if (!(data & DEV_INT))
+			return 0;
+
+		status = ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
+		if (status < 0)
+			return status;
+
+		usleep_range(10000, 11000);
+	} while (--count);
+
+	return -ETIMEDOUT;
+}
+
+static void ucsi_ccg_update_get_current_cam_cmd(struct ucsi_ccg *uc, u8 *data)
+{
+	u8 cam, new_cam;
+
+	cam = data[0];
+	new_cam = uc->orig[cam].linked_idx;
+	uc->updated[new_cam].active_idx = cam;
+	data[0] = new_cam;
+}
+
+static bool ucsi_ccg_update_altmodes(struct ucsi *ucsi,
+				     struct ucsi_altmode *orig,
+				     struct ucsi_altmode *updated)
+{
+	struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi);
+	struct ucsi_ccg_altmode *alt, *new_alt;
+	int i, j, k = 0;
+	bool found = false;
+
+	alt = uc->orig;
+	new_alt = uc->updated;
+	memset(uc->updated, 0, sizeof(uc->updated));
+
+	/*
+	 * Copy original connector altmodes to new structure.
+	 * We need this before second loop since second loop
+	 * checks for duplicate altmodes.
+	 */
+	for (i = 0; i < UCSI_MAX_ALTMODES; i++) {
+		alt[i].svid = orig[i].svid;
+		alt[i].mid = orig[i].mid;
+		if (!alt[i].svid)
+			break;
+	}
+
+	for (i = 0; i < UCSI_MAX_ALTMODES; i++) {
+		if (!alt[i].svid)
+			break;
+
+		/* already checked and considered */
+		if (alt[i].checked)
+			continue;
+
+		if (!DP_CONF_GET_PIN_ASSIGN(alt[i].mid)) {
+			/* Found Non DP altmode */
+			new_alt[k].svid = alt[i].svid;
+			new_alt[k].mid |= alt[i].mid;
+			new_alt[k].linked_idx = i;
+			alt[i].linked_idx = k;
+			updated[k].svid = new_alt[k].svid;
+			updated[k].mid = new_alt[k].mid;
+			k++;
+			continue;
+		}
+
+		for (j = i + 1; j < UCSI_MAX_ALTMODES; j++) {
+			if (alt[i].svid != alt[j].svid ||
+			    !DP_CONF_GET_PIN_ASSIGN(alt[j].mid)) {
+				continue;
+			} else {
+				/* Found duplicate DP mode */
+				new_alt[k].svid = alt[i].svid;
+				new_alt[k].mid |= alt[i].mid | alt[j].mid;
+				new_alt[k].linked_idx = UCSI_MULTI_DP_INDEX;
+				alt[i].linked_idx = k;
+				alt[j].linked_idx = k;
+				alt[j].checked = true;
+				found = true;
+			}
+		}
+		if (found) {
+			uc->has_multiple_dp = true;
+		} else {
+			/* Didn't find any duplicate DP altmode */
+			new_alt[k].svid = alt[i].svid;
+			new_alt[k].mid |= alt[i].mid;
+			new_alt[k].linked_idx = i;
+			alt[i].linked_idx = k;
+		}
+		updated[k].svid = new_alt[k].svid;
+		updated[k].mid = new_alt[k].mid;
+		k++;
+	}
+	return found;
+}
+
+static void ucsi_ccg_update_set_new_cam_cmd(struct ucsi_ccg *uc,
+					    struct ucsi_connector *con,
+					    u64 *cmd)
+{
+	struct ucsi_ccg_altmode *new_port, *port;
+	struct typec_altmode *alt = NULL;
+	u8 new_cam, cam, pin;
+	bool enter_new_mode;
+	int i, j, k = 0xff;
+
+	port = uc->orig;
+	new_cam = UCSI_SET_NEW_CAM_GET_AM(*cmd);
+	new_port = &uc->updated[new_cam];
+	cam = new_port->linked_idx;
+	enter_new_mode = UCSI_SET_NEW_CAM_ENTER(*cmd);
+
+	/*
+	 * If CAM is UCSI_MULTI_DP_INDEX then this is DP altmode
+	 * with multiple DP mode. Find out CAM for best pin assignment
+	 * among all DP mode. Priorite pin E->D->C after making sure
+	 * the partner supports that pin.
+	 */
+	if (cam == UCSI_MULTI_DP_INDEX) {
+		if (enter_new_mode) {
+			for (i = 0; con->partner_altmode[i]; i++) {
+				alt = con->partner_altmode[i];
+				if (alt->svid == new_port->svid)
+					break;
+			}
+			/*
+			 * alt will always be non NULL since this is
+			 * UCSI_SET_NEW_CAM command and so there will be
+			 * at least one con->partner_altmode[i] with svid
+			 * matching with new_port->svid.
+			 */
+			for (j = 0; port[j].svid; j++) {
+				pin = DP_CONF_GET_PIN_ASSIGN(port[j].mid);
+				if (alt && port[j].svid == alt->svid &&
+				    (pin & DP_CONF_GET_PIN_ASSIGN(alt->vdo))) {
+					/* prioritize pin E->D->C */
+					if (k == 0xff || (k != 0xff && pin >
+					    DP_CONF_GET_PIN_ASSIGN(port[k].mid))
+					    ) {
+						k = j;
+					}
+				}
+			}
+			cam = k;
+			new_port->active_idx = cam;
+		} else {
+			cam = new_port->active_idx;
+		}
+	}
+	*cmd &= ~UCSI_SET_NEW_CAM_AM_MASK;
+	*cmd |= UCSI_SET_NEW_CAM_SET_AM(cam);
+}
+
+/*
+ * Change the order of vdo values of NVIDIA test device FTB
+ * (Function Test Board) which reports altmode list with vdo=0x3
+ * first and then vdo=0x. Current logic to assign mode value is
+ * based on order in altmode list and it causes a mismatch of CON
+ * and SOP altmodes since NVIDIA GPU connector has order of vdo=0x1
+ * first and then vdo=0x3
+ */
+static void ucsi_ccg_nvidia_altmode(struct ucsi_ccg *uc,
+				    struct ucsi_altmode *alt)
+{
+	switch (UCSI_ALTMODE_OFFSET(uc->last_cmd_sent)) {
+	case NVIDIA_FTB_DP_OFFSET:
+		if (alt[0].mid == USB_TYPEC_NVIDIA_VLINK_DBG_VDO)
+			alt[0].mid = USB_TYPEC_NVIDIA_VLINK_DP_VDO |
+				DP_CAP_DP_SIGNALING | DP_CAP_USB |
+				DP_CONF_SET_PIN_ASSIGN(BIT(DP_PIN_ASSIGN_E));
+		break;
+	case NVIDIA_FTB_DBG_OFFSET:
+		if (alt[0].mid == USB_TYPEC_NVIDIA_VLINK_DP_VDO)
+			alt[0].mid = USB_TYPEC_NVIDIA_VLINK_DBG_VDO;
+		break;
+	default:
+		break;
+	}
+}
+
+static int ucsi_ccg_read(struct ucsi *ucsi, unsigned int offset,
+			 void *val, size_t val_len)
+{
+	struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi);
+	u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(offset);
+	struct ucsi_capability *cap;
+	struct ucsi_altmode *alt;
+	int ret;
+
+	ret = ccg_read(uc, reg, val, val_len);
+	if (ret)
+		return ret;
+
+	if (offset != UCSI_MESSAGE_IN)
+		return ret;
+
+	switch (UCSI_COMMAND(uc->last_cmd_sent)) {
+	case UCSI_GET_CURRENT_CAM:
+		if (uc->has_multiple_dp)
+			ucsi_ccg_update_get_current_cam_cmd(uc, (u8 *)val);
+		break;
+	case UCSI_GET_ALTERNATE_MODES:
+		if (UCSI_ALTMODE_RECIPIENT(uc->last_cmd_sent) ==
+		    UCSI_RECIPIENT_SOP) {
+			alt = val;
+			if (alt[0].svid == USB_TYPEC_NVIDIA_VLINK_SID)
+				ucsi_ccg_nvidia_altmode(uc, alt);
+		}
+		break;
+	case UCSI_GET_CAPABILITY:
+		if (uc->fw_build == CCG_FW_BUILD_NVIDIA_TEGRA) {
+			cap = val;
+			cap->features &= ~UCSI_CAP_ALT_MODE_DETAILS;
+		}
+		break;
+	default:
+		break;
+	}
+	uc->last_cmd_sent = 0;
+
+	return ret;
+}
+
+static int ucsi_ccg_async_write(struct ucsi *ucsi, unsigned int offset,
+				const void *val, size_t val_len)
+{
+	u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(offset);
+
+	return ccg_write(ucsi_get_drvdata(ucsi), reg, val, val_len);
+}
+
+static int ucsi_ccg_sync_write(struct ucsi *ucsi, unsigned int offset,
+			       const void *val, size_t val_len)
+{
+	struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi);
+	struct ucsi_connector *con;
+	int con_index;
+	int ret;
+
+	mutex_lock(&uc->lock);
+	pm_runtime_get_sync(uc->dev);
+	set_bit(DEV_CMD_PENDING, &uc->flags);
+
+	if (offset == UCSI_CONTROL && val_len == sizeof(uc->last_cmd_sent)) {
+		uc->last_cmd_sent = *(u64 *)val;
+
+		if (UCSI_COMMAND(uc->last_cmd_sent) == UCSI_SET_NEW_CAM &&
+		    uc->has_multiple_dp) {
+			con_index = (uc->last_cmd_sent >> 16) &
+				    UCSI_CMD_CONNECTOR_MASK;
+			con = &uc->ucsi->connector[con_index - 1];
+			ucsi_ccg_update_set_new_cam_cmd(uc, con, (u64 *)val);
+		}
+	}
+
+	ret = ucsi_ccg_async_write(ucsi, offset, val, val_len);
+	if (ret)
+		goto err_clear_bit;
+
+	if (!wait_for_completion_timeout(&uc->complete, msecs_to_jiffies(5000)))
+		ret = -ETIMEDOUT;
+
+err_clear_bit:
+	clear_bit(DEV_CMD_PENDING, &uc->flags);
+	pm_runtime_put_sync(uc->dev);
+	mutex_unlock(&uc->lock);
+
+	return ret;
+}
+
+static const struct ucsi_operations ucsi_ccg_ops = {
+	.read = ucsi_ccg_read,
+	.sync_write = ucsi_ccg_sync_write,
+	.async_write = ucsi_ccg_async_write,
+	.update_altmodes = ucsi_ccg_update_altmodes
+};
+
+static irqreturn_t ccg_irq_handler(int irq, void *data)
+{
+	u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(UCSI_CCI);
+	struct ucsi_ccg *uc = data;
+	u8 intr_reg;
+	u32 cci;
+	int ret;
+
+	ret = ccg_read(uc, CCGX_RAB_INTR_REG, &intr_reg, sizeof(intr_reg));
+	if (ret)
+		return ret;
+
+	ret = ccg_read(uc, reg, (void *)&cci, sizeof(cci));
+	if (ret)
+		goto err_clear_irq;
+
+	if (UCSI_CCI_CONNECTOR(cci))
+		ucsi_connector_change(uc->ucsi, UCSI_CCI_CONNECTOR(cci));
+
+	if (test_bit(DEV_CMD_PENDING, &uc->flags) &&
+	    cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))
+		complete(&uc->complete);
+
+err_clear_irq:
+	ccg_write(uc, CCGX_RAB_INTR_REG, &intr_reg, sizeof(intr_reg));
+
+	return IRQ_HANDLED;
+}
+
+static int ccg_request_irq(struct ucsi_ccg *uc)
+{
+	unsigned long flags = IRQF_ONESHOT;
+
+	if (!has_acpi_companion(uc->dev))
+		flags |= IRQF_TRIGGER_HIGH;
+
+	return request_threaded_irq(uc->irq, NULL, ccg_irq_handler, flags, dev_name(uc->dev), uc);
+}
+
+static void ccg_pm_workaround_work(struct work_struct *pm_work)
+{
+	ccg_irq_handler(0, container_of(pm_work, struct ucsi_ccg, pm_work));
+}
+
+static int get_fw_info(struct ucsi_ccg *uc)
+{
+	int err;
+
+	err = ccg_read(uc, CCGX_RAB_READ_ALL_VER, (u8 *)(&uc->version),
+		       sizeof(uc->version));
+	if (err < 0)
+		return err;
+
+	uc->fw_version = CCG_VERSION(uc->version[FW2].app.ver) |
+			CCG_VERSION_PATCH(uc->version[FW2].app.patch);
+
+	err = ccg_read(uc, CCGX_RAB_DEVICE_MODE, (u8 *)(&uc->info),
+		       sizeof(uc->info));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static inline bool invalid_async_evt(int code)
+{
+	return (code >= CCG_EVENT_MAX) || (code < EVENT_INDEX);
+}
+
+static void ccg_process_response(struct ucsi_ccg *uc)
+{
+	struct device *dev = uc->dev;
+
+	if (uc->dev_resp.code & ASYNC_EVENT) {
+		if (uc->dev_resp.code == RESET_COMPLETE) {
+			if (test_bit(RESET_PENDING, &uc->flags))
+				uc->cmd_resp = uc->dev_resp.code;
+			get_fw_info(uc);
+		}
+		if (invalid_async_evt(uc->dev_resp.code))
+			dev_err(dev, "invalid async evt %d\n",
+				uc->dev_resp.code);
+	} else {
+		if (test_bit(DEV_CMD_PENDING, &uc->flags)) {
+			uc->cmd_resp = uc->dev_resp.code;
+			clear_bit(DEV_CMD_PENDING, &uc->flags);
+		} else {
+			dev_err(dev, "dev resp 0x%04x but no cmd pending\n",
+				uc->dev_resp.code);
+		}
+	}
+}
+
+static int ccg_read_response(struct ucsi_ccg *uc)
+{
+	unsigned long target = jiffies + msecs_to_jiffies(1000);
+	struct device *dev = uc->dev;
+	u8 intval;
+	int status;
+
+	/* wait for interrupt status to get updated */
+	do {
+		status = ccg_read(uc, CCGX_RAB_INTR_REG, &intval,
+				  sizeof(intval));
+		if (status < 0)
+			return status;
+
+		if (intval & DEV_INT)
+			break;
+		usleep_range(500, 600);
+	} while (time_is_after_jiffies(target));
+
+	if (time_is_before_jiffies(target)) {
+		dev_err(dev, "response timeout error\n");
+		return -ETIME;
+	}
+
+	status = ccg_read(uc, CCGX_RAB_RESPONSE, (u8 *)&uc->dev_resp,
+			  sizeof(uc->dev_resp));
+	if (status < 0)
+		return status;
+
+	status = ccg_write(uc, CCGX_RAB_INTR_REG, &intval, sizeof(intval));
+	if (status < 0)
+		return status;
+
+	return 0;
+}
+
+/* Caller must hold uc->lock */
+static int ccg_send_command(struct ucsi_ccg *uc, struct ccg_cmd *cmd)
+{
+	struct device *dev = uc->dev;
+	int ret;
+
+	switch (cmd->reg & 0xF000) {
+	case DEV_REG_IDX:
+		set_bit(DEV_CMD_PENDING, &uc->flags);
+		break;
+	default:
+		dev_err(dev, "invalid cmd register\n");
+		break;
+	}
+
+	ret = ccg_write(uc, cmd->reg, (u8 *)&cmd->data, cmd->len);
+	if (ret < 0)
+		return ret;
+
+	msleep(cmd->delay);
+
+	ret = ccg_read_response(uc);
+	if (ret < 0) {
+		dev_err(dev, "response read error\n");
+		switch (cmd->reg & 0xF000) {
+		case DEV_REG_IDX:
+			clear_bit(DEV_CMD_PENDING, &uc->flags);
+			break;
+		default:
+			dev_err(dev, "invalid cmd register\n");
+			break;
+		}
+		return -EIO;
+	}
+	ccg_process_response(uc);
+
+	return uc->cmd_resp;
+}
+
+static int ccg_cmd_enter_flashing(struct ucsi_ccg *uc)
+{
+	struct ccg_cmd cmd;
+	int ret;
+
+	cmd.reg = CCGX_RAB_ENTER_FLASHING;
+	cmd.data = FLASH_ENTER_SIG;
+	cmd.len = 1;
+	cmd.delay = 50;
+
+	mutex_lock(&uc->lock);
+
+	ret = ccg_send_command(uc, &cmd);
+
+	mutex_unlock(&uc->lock);
+
+	if (ret != CMD_SUCCESS) {
+		dev_err(uc->dev, "enter flashing failed ret=%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ccg_cmd_reset(struct ucsi_ccg *uc)
+{
+	struct ccg_cmd cmd;
+	u8 *p;
+	int ret;
+
+	p = (u8 *)&cmd.data;
+	cmd.reg = CCGX_RAB_RESET_REQ;
+	p[0] = RESET_SIG;
+	p[1] = CMD_RESET_DEV;
+	cmd.len = 2;
+	cmd.delay = 5000;
+
+	mutex_lock(&uc->lock);
+
+	set_bit(RESET_PENDING, &uc->flags);
+
+	ret = ccg_send_command(uc, &cmd);
+	if (ret != RESET_COMPLETE)
+		goto err_clear_flag;
+
+	ret = 0;
+
+err_clear_flag:
+	clear_bit(RESET_PENDING, &uc->flags);
+
+	mutex_unlock(&uc->lock);
+
+	return ret;
+}
+
+static int ccg_cmd_port_control(struct ucsi_ccg *uc, bool enable)
+{
+	struct ccg_cmd cmd;
+	int ret;
+
+	cmd.reg = CCGX_RAB_PDPORT_ENABLE;
+	if (enable)
+		cmd.data = (uc->port_num == 1) ?
+			    PDPORT_1 : (PDPORT_1 | PDPORT_2);
+	else
+		cmd.data = 0x0;
+	cmd.len = 1;
+	cmd.delay = 10;
+
+	mutex_lock(&uc->lock);
+
+	ret = ccg_send_command(uc, &cmd);
+
+	mutex_unlock(&uc->lock);
+
+	if (ret != CMD_SUCCESS) {
+		dev_err(uc->dev, "port control failed ret=%d\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int ccg_cmd_jump_boot_mode(struct ucsi_ccg *uc, int bl_mode)
+{
+	struct ccg_cmd cmd;
+	int ret;
+
+	cmd.reg = CCGX_RAB_JUMP_TO_BOOT;
+
+	if (bl_mode)
+		cmd.data = TO_BOOT;
+	else
+		cmd.data = TO_ALT_FW;
+
+	cmd.len = 1;
+	cmd.delay = 100;
+
+	mutex_lock(&uc->lock);
+
+	set_bit(RESET_PENDING, &uc->flags);
+
+	ret = ccg_send_command(uc, &cmd);
+	if (ret != RESET_COMPLETE)
+		goto err_clear_flag;
+
+	ret = 0;
+
+err_clear_flag:
+	clear_bit(RESET_PENDING, &uc->flags);
+
+	mutex_unlock(&uc->lock);
+
+	return ret;
+}
+
+static int
+ccg_cmd_write_flash_row(struct ucsi_ccg *uc, u16 row,
+			const void *data, u8 fcmd)
+{
+	struct i2c_client *client = uc->client;
+	struct ccg_cmd cmd;
+	u8 buf[CCG4_ROW_SIZE + 2];
+	u8 *p;
+	int ret;
+
+	/* Copy the data into the flash read/write memory. */
+	put_unaligned_le16(REG_FLASH_RW_MEM, buf);
+
+	memcpy(buf + 2, data, CCG4_ROW_SIZE);
+
+	mutex_lock(&uc->lock);
+
+	ret = i2c_master_send(client, buf, CCG4_ROW_SIZE + 2);
+	if (ret != CCG4_ROW_SIZE + 2) {
+		dev_err(uc->dev, "REG_FLASH_RW_MEM write fail %d\n", ret);
+		mutex_unlock(&uc->lock);
+		return ret < 0 ? ret : -EIO;
+	}
+
+	/* Use the FLASH_ROW_READ_WRITE register to trigger */
+	/* writing of data to the desired flash row */
+	p = (u8 *)&cmd.data;
+	cmd.reg = CCGX_RAB_FLASH_ROW_RW;
+	p[0] = FLASH_SIG;
+	p[1] = fcmd;
+	put_unaligned_le16(row, &p[2]);
+	cmd.len = 4;
+	cmd.delay = 50;
+	if (fcmd == FLASH_FWCT_SIG_WR_CMD)
+		cmd.delay += 400;
+	if (row == 510)
+		cmd.delay += 220;
+	ret = ccg_send_command(uc, &cmd);
+
+	mutex_unlock(&uc->lock);
+
+	if (ret != CMD_SUCCESS) {
+		dev_err(uc->dev, "write flash row failed ret=%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ccg_cmd_validate_fw(struct ucsi_ccg *uc, unsigned int fwid)
+{
+	struct ccg_cmd cmd;
+	int ret;
+
+	cmd.reg = CCGX_RAB_VALIDATE_FW;
+	cmd.data = fwid;
+	cmd.len = 1;
+	cmd.delay = 500;
+
+	mutex_lock(&uc->lock);
+
+	ret = ccg_send_command(uc, &cmd);
+
+	mutex_unlock(&uc->lock);
+
+	if (ret != CMD_SUCCESS)
+		return ret;
+
+	return 0;
+}
+
+static bool ccg_check_vendor_version(struct ucsi_ccg *uc,
+				     struct version_format *app,
+				     struct fw_config_table *fw_cfg)
+{
+	struct device *dev = uc->dev;
+
+	/* Check if the fw build is for supported vendors */
+	if (le16_to_cpu(app->build) != uc->fw_build) {
+		dev_info(dev, "current fw is not from supported vendor\n");
+		return false;
+	}
+
+	/* Check if the new fw build is for supported vendors */
+	if (le16_to_cpu(fw_cfg->app.build) != uc->fw_build) {
+		dev_info(dev, "new fw is not from supported vendor\n");
+		return false;
+	}
+	return true;
+}
+
+static bool ccg_check_fw_version(struct ucsi_ccg *uc, const char *fw_name,
+				 struct version_format *app)
+{
+	const struct firmware *fw = NULL;
+	struct device *dev = uc->dev;
+	struct fw_config_table fw_cfg;
+	u32 cur_version, new_version;
+	bool is_later = false;
+
+	if (request_firmware(&fw, fw_name, dev) != 0) {
+		dev_err(dev, "error: Failed to open cyacd file %s\n", fw_name);
+		return false;
+	}
+
+	/*
+	 * check if signed fw
+	 * last part of fw image is fw cfg table and signature
+	 */
+	if (fw->size < sizeof(fw_cfg) + FW_CFG_TABLE_SIG_SIZE)
+		goto out_release_firmware;
+
+	memcpy((uint8_t *)&fw_cfg, fw->data + fw->size -
+	       sizeof(fw_cfg) - FW_CFG_TABLE_SIG_SIZE, sizeof(fw_cfg));
+
+	if (fw_cfg.identity != ('F' | 'W' << 8 | 'C' << 16 | 'T' << 24)) {
+		dev_info(dev, "not a signed image\n");
+		goto out_release_firmware;
+	}
+
+	/* compare input version with FWCT version */
+	cur_version = le16_to_cpu(app->build) | CCG_VERSION_PATCH(app->patch) |
+			CCG_VERSION(app->ver);
+
+	new_version = le16_to_cpu(fw_cfg.app.build) |
+			CCG_VERSION_PATCH(fw_cfg.app.patch) |
+			CCG_VERSION(fw_cfg.app.ver);
+
+	if (!ccg_check_vendor_version(uc, app, &fw_cfg))
+		goto out_release_firmware;
+
+	if (new_version > cur_version)
+		is_later = true;
+
+out_release_firmware:
+	release_firmware(fw);
+	return is_later;
+}
+
+static int ccg_fw_update_needed(struct ucsi_ccg *uc,
+				enum enum_flash_mode *mode)
+{
+	struct device *dev = uc->dev;
+	int err;
+	struct version_info version[3];
+
+	err = ccg_read(uc, CCGX_RAB_DEVICE_MODE, (u8 *)(&uc->info),
+		       sizeof(uc->info));
+	if (err) {
+		dev_err(dev, "read device mode failed\n");
+		return err;
+	}
+
+	err = ccg_read(uc, CCGX_RAB_READ_ALL_VER, (u8 *)version,
+		       sizeof(version));
+	if (err) {
+		dev_err(dev, "read device mode failed\n");
+		return err;
+	}
+
+	if (memcmp(&version[FW1], "\0\0\0\0\0\0\0\0",
+		   sizeof(struct version_info)) == 0) {
+		dev_info(dev, "secondary fw is not flashed\n");
+		*mode = SECONDARY_BL;
+	} else if (le16_to_cpu(version[FW1].base.build) <
+		secondary_fw_min_ver) {
+		dev_info(dev, "secondary fw version is too low (< %d)\n",
+			 secondary_fw_min_ver);
+		*mode = SECONDARY;
+	} else if (memcmp(&version[FW2], "\0\0\0\0\0\0\0\0",
+		   sizeof(struct version_info)) == 0) {
+		dev_info(dev, "primary fw is not flashed\n");
+		*mode = PRIMARY;
+	} else if (ccg_check_fw_version(uc, ccg_fw_names[PRIMARY],
+		   &version[FW2].app)) {
+		dev_info(dev, "found primary fw with later version\n");
+		*mode = PRIMARY;
+	} else {
+		dev_info(dev, "secondary and primary fw are the latest\n");
+		*mode = FLASH_NOT_NEEDED;
+	}
+	return 0;
+}
+
+static int do_flash(struct ucsi_ccg *uc, enum enum_flash_mode mode)
+{
+	struct device *dev = uc->dev;
+	const struct firmware *fw = NULL;
+	const char *p, *s;
+	const char *eof;
+	int err, row, len, line_sz, line_cnt = 0;
+	unsigned long start_time = jiffies;
+	struct fw_config_table  fw_cfg;
+	u8 fw_cfg_sig[FW_CFG_TABLE_SIG_SIZE];
+	u8 *wr_buf;
+
+	err = request_firmware(&fw, ccg_fw_names[mode], dev);
+	if (err) {
+		dev_err(dev, "request %s failed err=%d\n",
+			ccg_fw_names[mode], err);
+		return err;
+	}
+
+	if (((uc->info.mode & CCG_DEVINFO_FWMODE_MASK) >>
+			CCG_DEVINFO_FWMODE_SHIFT) == FW2) {
+		err = ccg_cmd_port_control(uc, false);
+		if (err < 0)
+			goto release_fw;
+		err = ccg_cmd_jump_boot_mode(uc, 0);
+		if (err < 0)
+			goto release_fw;
+	}
+
+	eof = fw->data + fw->size;
+
+	/*
+	 * check if signed fw
+	 * last part of fw image is fw cfg table and signature
+	 */
+	if (fw->size < sizeof(fw_cfg) + sizeof(fw_cfg_sig))
+		goto not_signed_fw;
+
+	memcpy((uint8_t *)&fw_cfg, fw->data + fw->size -
+	       sizeof(fw_cfg) - sizeof(fw_cfg_sig), sizeof(fw_cfg));
+
+	if (fw_cfg.identity != ('F' | ('W' << 8) | ('C' << 16) | ('T' << 24))) {
+		dev_info(dev, "not a signed image\n");
+		goto not_signed_fw;
+	}
+	eof = fw->data + fw->size - sizeof(fw_cfg) - sizeof(fw_cfg_sig);
+
+	memcpy((uint8_t *)&fw_cfg_sig,
+	       fw->data + fw->size - sizeof(fw_cfg_sig), sizeof(fw_cfg_sig));
+
+	/* flash fw config table and signature first */
+	err = ccg_cmd_write_flash_row(uc, 0, (u8 *)&fw_cfg,
+				      FLASH_FWCT1_WR_CMD);
+	if (err)
+		goto release_fw;
+
+	err = ccg_cmd_write_flash_row(uc, 0, (u8 *)&fw_cfg + CCG4_ROW_SIZE,
+				      FLASH_FWCT2_WR_CMD);
+	if (err)
+		goto release_fw;
+
+	err = ccg_cmd_write_flash_row(uc, 0, &fw_cfg_sig,
+				      FLASH_FWCT_SIG_WR_CMD);
+	if (err)
+		goto release_fw;
+
+not_signed_fw:
+	wr_buf = kzalloc(CCG4_ROW_SIZE + 4, GFP_KERNEL);
+	if (!wr_buf) {
+		err = -ENOMEM;
+		goto release_fw;
+	}
+
+	err = ccg_cmd_enter_flashing(uc);
+	if (err)
+		goto release_mem;
+
+	/*****************************************************************
+	 * CCG firmware image (.cyacd) file line format
+	 *
+	 * :00rrrrllll[dd....]cc/r/n
+	 *
+	 * :00   header
+	 * rrrr is row number to flash				(4 char)
+	 * llll is data len to flash				(4 char)
+	 * dd   is a data field represents one byte of data	(512 char)
+	 * cc   is checksum					(2 char)
+	 * \r\n newline
+	 *
+	 * Total length: 3 + 4 + 4 + 512 + 2 + 2 = 527
+	 *
+	 *****************************************************************/
+
+	p = strnchr(fw->data, fw->size, ':');
+	while (p < eof) {
+		s = strnchr(p + 1, eof - p - 1, ':');
+
+		if (!s)
+			s = eof;
+
+		line_sz = s - p;
+
+		if (line_sz != CYACD_LINE_SIZE) {
+			dev_err(dev, "Bad FW format line_sz=%d\n", line_sz);
+			err =  -EINVAL;
+			goto release_mem;
+		}
+
+		if (hex2bin(wr_buf, p + 3, CCG4_ROW_SIZE + 4)) {
+			err =  -EINVAL;
+			goto release_mem;
+		}
+
+		row = get_unaligned_be16(wr_buf);
+		len = get_unaligned_be16(&wr_buf[2]);
+
+		if (len != CCG4_ROW_SIZE) {
+			err =  -EINVAL;
+			goto release_mem;
+		}
+
+		err = ccg_cmd_write_flash_row(uc, row, wr_buf + 4,
+					      FLASH_WR_CMD);
+		if (err)
+			goto release_mem;
+
+		line_cnt++;
+		p = s;
+	}
+
+	dev_info(dev, "total %d row flashed. time: %dms\n",
+		 line_cnt, jiffies_to_msecs(jiffies - start_time));
+
+	err = ccg_cmd_validate_fw(uc, (mode == PRIMARY) ? FW2 :  FW1);
+	if (err)
+		dev_err(dev, "%s validation failed err=%d\n",
+			(mode == PRIMARY) ? "FW2" :  "FW1", err);
+	else
+		dev_info(dev, "%s validated\n",
+			 (mode == PRIMARY) ? "FW2" :  "FW1");
+
+	err = ccg_cmd_port_control(uc, false);
+	if (err < 0)
+		goto release_mem;
+
+	err = ccg_cmd_reset(uc);
+	if (err < 0)
+		goto release_mem;
+
+	err = ccg_cmd_port_control(uc, true);
+	if (err < 0)
+		goto release_mem;
+
+release_mem:
+	kfree(wr_buf);
+
+release_fw:
+	release_firmware(fw);
+	return err;
+}
+
+/*******************************************************************************
+ * CCG4 has two copies of the firmware in addition to the bootloader.
+ * If the device is running FW1, FW2 can be updated with the new version.
+ * Dual firmware mode allows the CCG device to stay in a PD contract and support
+ * USB PD and Type-C functionality while a firmware update is in progress.
+ ******************************************************************************/
+static int ccg_fw_update(struct ucsi_ccg *uc, enum enum_flash_mode flash_mode)
+{
+	int err = 0;
+
+	while (flash_mode != FLASH_NOT_NEEDED) {
+		err = do_flash(uc, flash_mode);
+		if (err < 0)
+			return err;
+		err = ccg_fw_update_needed(uc, &flash_mode);
+		if (err < 0)
+			return err;
+	}
+	dev_info(uc->dev, "CCG FW update successful\n");
+
+	return err;
+}
+
+static int ccg_restart(struct ucsi_ccg *uc)
+{
+	struct device *dev = uc->dev;
+	int status;
+
+	status = ucsi_ccg_init(uc);
+	if (status < 0) {
+		dev_err(dev, "ucsi_ccg_start fail, err=%d\n", status);
+		return status;
+	}
+
+	status = ccg_request_irq(uc);
+	if (status < 0) {
+		dev_err(dev, "request_threaded_irq failed - %d\n", status);
+		return status;
+	}
+
+	status = ucsi_register(uc->ucsi);
+	if (status) {
+		dev_err(uc->dev, "failed to register the interface\n");
+		return status;
+	}
+
+	pm_runtime_enable(uc->dev);
+	return 0;
+}
+
+static void ccg_update_firmware(struct work_struct *work)
+{
+	struct ucsi_ccg *uc = container_of(work, struct ucsi_ccg, work);
+	enum enum_flash_mode flash_mode;
+	int status;
+
+	status = ccg_fw_update_needed(uc, &flash_mode);
+	if (status < 0)
+		return;
+
+	if (flash_mode != FLASH_NOT_NEEDED) {
+		ucsi_unregister(uc->ucsi);
+		pm_runtime_disable(uc->dev);
+		free_irq(uc->irq, uc);
+
+		ccg_fw_update(uc, flash_mode);
+		ccg_restart(uc);
+	}
+}
+
+static ssize_t do_flash_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t n)
+{
+	struct ucsi_ccg *uc = i2c_get_clientdata(to_i2c_client(dev));
+	bool flash;
+
+	if (kstrtobool(buf, &flash))
+		return -EINVAL;
+
+	if (!flash)
+		return n;
+
+	if (uc->fw_build == 0x0) {
+		dev_err(dev, "fail to flash FW due to missing FW build info\n");
+		return -EINVAL;
+	}
+
+	schedule_work(&uc->work);
+	return n;
+}
+
+static DEVICE_ATTR_WO(do_flash);
+
+static struct attribute *ucsi_ccg_attrs[] = {
+	&dev_attr_do_flash.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(ucsi_ccg);
+
+static int ucsi_ccg_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct ucsi_ccg *uc;
+	int status;
+
+	uc = devm_kzalloc(dev, sizeof(*uc), GFP_KERNEL);
+	if (!uc)
+		return -ENOMEM;
+
+	uc->dev = dev;
+	uc->client = client;
+	uc->irq = client->irq;
+	mutex_init(&uc->lock);
+	init_completion(&uc->complete);
+	INIT_WORK(&uc->work, ccg_update_firmware);
+	INIT_WORK(&uc->pm_work, ccg_pm_workaround_work);
+
+	/* Only fail FW flashing when FW build information is not provided */
+	status = device_property_read_u16(dev, "ccgx,firmware-build",
+					  &uc->fw_build);
+	if (status)
+		dev_err(uc->dev, "failed to get FW build information\n");
+
+	/* reset ccg device and initialize ucsi */
+	status = ucsi_ccg_init(uc);
+	if (status < 0) {
+		dev_err(uc->dev, "ucsi_ccg_init failed - %d\n", status);
+		return status;
+	}
+
+	status = get_fw_info(uc);
+	if (status < 0) {
+		dev_err(uc->dev, "get_fw_info failed - %d\n", status);
+		return status;
+	}
+
+	uc->port_num = 1;
+
+	if (uc->info.mode & CCG_DEVINFO_PDPORTS_MASK)
+		uc->port_num++;
+
+	uc->ucsi = ucsi_create(dev, &ucsi_ccg_ops);
+	if (IS_ERR(uc->ucsi))
+		return PTR_ERR(uc->ucsi);
+
+	ucsi_set_drvdata(uc->ucsi, uc);
+
+	status = ccg_request_irq(uc);
+	if (status < 0) {
+		dev_err(uc->dev, "request_threaded_irq failed - %d\n", status);
+		goto out_ucsi_destroy;
+	}
+
+	status = ucsi_register(uc->ucsi);
+	if (status)
+		goto out_free_irq;
+
+	i2c_set_clientdata(client, uc);
+
+	pm_runtime_set_active(uc->dev);
+	pm_runtime_enable(uc->dev);
+	pm_runtime_use_autosuspend(uc->dev);
+	pm_runtime_set_autosuspend_delay(uc->dev, 5000);
+	pm_runtime_idle(uc->dev);
+
+	return 0;
+
+out_free_irq:
+	free_irq(uc->irq, uc);
+out_ucsi_destroy:
+	ucsi_destroy(uc->ucsi);
+
+	return status;
+}
+
+static void ucsi_ccg_remove(struct i2c_client *client)
+{
+	struct ucsi_ccg *uc = i2c_get_clientdata(client);
+
+	cancel_work_sync(&uc->pm_work);
+	cancel_work_sync(&uc->work);
+	pm_runtime_disable(uc->dev);
+	ucsi_unregister(uc->ucsi);
+	ucsi_destroy(uc->ucsi);
+	free_irq(uc->irq, uc);
+}
+
+static const struct i2c_device_id ucsi_ccg_device_id[] = {
+	{"ccgx-ucsi", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ucsi_ccg_device_id);
+
+static const struct acpi_device_id amd_i2c_ucsi_match[] = {
+	{"AMDI0042"},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, amd_i2c_ucsi_match);
+
+static int ucsi_ccg_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ucsi_ccg *uc = i2c_get_clientdata(client);
+
+	return ucsi_resume(uc->ucsi);
+}
+
+static int ucsi_ccg_runtime_suspend(struct device *dev)
+{
+	return 0;
+}
+
+static int ucsi_ccg_runtime_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ucsi_ccg *uc = i2c_get_clientdata(client);
+
+	/*
+	 * Firmware version 3.1.10 or earlier, built for NVIDIA has known issue
+	 * of missing interrupt when a device is connected for runtime resume.
+	 * Schedule a work to call ISR as a workaround.
+	 */
+	if (uc->fw_build == CCG_FW_BUILD_NVIDIA &&
+	    uc->fw_version <= CCG_OLD_FW_VERSION)
+		schedule_work(&uc->pm_work);
+
+	return 0;
+}
+
+static const struct dev_pm_ops ucsi_ccg_pm = {
+	.resume = ucsi_ccg_resume,
+	.runtime_suspend = ucsi_ccg_runtime_suspend,
+	.runtime_resume = ucsi_ccg_runtime_resume,
+};
+
+static struct i2c_driver ucsi_ccg_driver = {
+	.driver = {
+		.name = "ucsi_ccg",
+		.pm = &ucsi_ccg_pm,
+		.dev_groups = ucsi_ccg_groups,
+		.acpi_match_table = amd_i2c_ucsi_match,
+	},
+	.probe = ucsi_ccg_probe,
+	.remove = ucsi_ccg_remove,
+	.id_table = ucsi_ccg_device_id,
+};
+
+module_i2c_driver(ucsi_ccg_driver);
+
+MODULE_AUTHOR("Ajay Gupta <ajayg@nvidia.com>");
+MODULE_DESCRIPTION("UCSI driver for Cypress CCGx Type-C controller");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/typec/ucsi/ucsi_stm32g0.c b/drivers/usb/typec/ucsi/ucsi_stm32g0.c
new file mode 100644
index 000000000..7b92f0c8d
--- /dev/null
+++ b/drivers/usb/typec/ucsi/ucsi_stm32g0.c
@@ -0,0 +1,775 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/*
+ * UCSI driver for STMicroelectronics STM32G0 Type-C PD controller
+ *
+ * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
+ * Author: Fabrice Gasnier <fabrice.gasnier@foss.st.com>.
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <asm/unaligned.h>
+
+#include "ucsi.h"
+
+/* STM32G0 I2C bootloader addr: 0b1010001x (See AN2606) */
+#define STM32G0_I2C_BL_ADDR	(0xa2 >> 1)
+
+/* STM32G0 I2C bootloader max data size */
+#define STM32G0_I2C_BL_SZ	256
+
+/* STM32 I2C bootloader commands (See AN4221) */
+#define STM32_CMD_GVR		0x01	/* Gets the bootloader version */
+#define STM32_CMD_GVR_LEN	1
+#define STM32_CMD_RM		0x11	/* Reag memory */
+#define STM32_CMD_WM		0x31	/* Write memory */
+#define STM32_CMD_ADDR_LEN	5	/* Address len for go, mem write... */
+#define STM32_CMD_ERASE		0x44	/* Erase page, bank or all */
+#define STM32_CMD_ERASE_SPECIAL_LEN	3
+#define STM32_CMD_GLOBAL_MASS_ERASE	0xffff /* All-bank erase */
+
+/* STM32 I2C bootloader answer status */
+#define STM32G0_I2C_BL_ACK	0x79
+#define STM32G0_I2C_BL_NACK	0x1f
+#define STM32G0_I2C_BL_BUSY	0x76
+
+/* STM32G0 flash definitions */
+#define STM32G0_USER_OPTION_BYTES	0x1fff7800
+#define STM32G0_USER_OB_NBOOT0		BIT(26)
+#define STM32G0_USER_OB_NBOOT_SEL	BIT(24)
+#define STM32G0_USER_OB_BOOT_MAIN	(STM32G0_USER_OB_NBOOT0 | STM32G0_USER_OB_NBOOT_SEL)
+#define STM32G0_MAIN_MEM_ADDR		0x08000000
+
+/* STM32 Firmware definitions: additional commands */
+#define STM32G0_FW_GETVER	0x00	/* Gets the firmware version */
+#define STM32G0_FW_GETVER_LEN	4
+#define STM32G0_FW_RSTGOBL	0x21	/* Reset and go to bootloader */
+#define STM32G0_FW_KEYWORD	0xa56959a6
+
+/* ucsi_stm32g0_fw_info located at the end of the firmware */
+struct ucsi_stm32g0_fw_info {
+	u32 version;
+	u32 keyword;
+};
+
+struct ucsi_stm32g0 {
+	struct i2c_client *client;
+	struct i2c_client *i2c_bl;
+	bool in_bootloader;
+	u8 bl_version;
+	struct completion complete;
+	struct device *dev;
+	unsigned long flags;
+	const char *fw_name;
+	struct ucsi *ucsi;
+	bool suspended;
+	bool wakeup_event;
+};
+
+/*
+ * Bootloader commands helpers:
+ * - send command (2 bytes)
+ * - check ack
+ * Then either:
+ * - receive data
+ * - receive data + check ack
+ * - send data + check ack
+ * These operations depends on the command and have various length.
+ */
+static int ucsi_stm32g0_bl_check_ack(struct ucsi *ucsi)
+{
+	struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi);
+	struct i2c_client *client = g0->i2c_bl;
+	unsigned char ack;
+	struct i2c_msg msg[] = {
+		{
+			.addr	= client->addr,
+			.flags  = I2C_M_RD,
+			.len	= 1,
+			.buf	= &ack,
+		},
+	};
+	int ret;
+
+	ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+	if (ret != ARRAY_SIZE(msg)) {
+		dev_err(g0->dev, "i2c bl ack (%02x), error: %d\n", client->addr, ret);
+
+		return ret < 0 ? ret : -EIO;
+	}
+
+	/* The 'ack' byte should contain bootloader answer: ack/nack/busy */
+	switch (ack) {
+	case STM32G0_I2C_BL_ACK:
+		return 0;
+	case STM32G0_I2C_BL_NACK:
+		return -ENOENT;
+	case STM32G0_I2C_BL_BUSY:
+		return -EBUSY;
+	default:
+		dev_err(g0->dev, "i2c bl ack (%02x), invalid byte: %02x\n",
+			client->addr, ack);
+		return -EINVAL;
+	}
+}
+
+static int ucsi_stm32g0_bl_cmd_check_ack(struct ucsi *ucsi, unsigned int cmd, bool check_ack)
+{
+	struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi);
+	struct i2c_client *client = g0->i2c_bl;
+	unsigned char buf[2];
+	struct i2c_msg msg[] = {
+		{
+			.addr	= client->addr,
+			.flags  = 0,
+			.len	= sizeof(buf),
+			.buf	= buf,
+		},
+	};
+	int ret;
+
+	/*
+	 * Send STM32 bootloader command format is two bytes:
+	 * - command code
+	 * - XOR'ed command code
+	 */
+	buf[0] = cmd;
+	buf[1] = cmd ^ 0xff;
+
+	ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+	if (ret != ARRAY_SIZE(msg)) {
+		dev_dbg(g0->dev, "i2c bl cmd %d (%02x), error: %d\n", cmd, client->addr, ret);
+
+		return ret < 0 ? ret : -EIO;
+	}
+
+	if (check_ack)
+		return ucsi_stm32g0_bl_check_ack(ucsi);
+
+	return 0;
+}
+
+static int ucsi_stm32g0_bl_cmd(struct ucsi *ucsi, unsigned int cmd)
+{
+	return ucsi_stm32g0_bl_cmd_check_ack(ucsi, cmd, true);
+}
+
+static int ucsi_stm32g0_bl_rcv_check_ack(struct ucsi *ucsi, void *data, size_t len, bool check_ack)
+{
+	struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi);
+	struct i2c_client *client = g0->i2c_bl;
+	struct i2c_msg msg[] = {
+		{
+			.addr	= client->addr,
+			.flags  = I2C_M_RD,
+			.len	= len,
+			.buf	= data,
+		},
+	};
+	int ret;
+
+	ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+	if (ret != ARRAY_SIZE(msg)) {
+		dev_err(g0->dev, "i2c bl rcv %02x, error: %d\n", client->addr, ret);
+
+		return ret < 0 ? ret : -EIO;
+	}
+
+	if (check_ack)
+		return ucsi_stm32g0_bl_check_ack(ucsi);
+
+	return 0;
+}
+
+static int ucsi_stm32g0_bl_rcv(struct ucsi *ucsi, void *data, size_t len)
+{
+	return ucsi_stm32g0_bl_rcv_check_ack(ucsi, data, len, true);
+}
+
+static int ucsi_stm32g0_bl_rcv_woack(struct ucsi *ucsi, void *data, size_t len)
+{
+	return ucsi_stm32g0_bl_rcv_check_ack(ucsi, data, len, false);
+}
+
+static int ucsi_stm32g0_bl_send(struct ucsi *ucsi, void *data, size_t len)
+{
+	struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi);
+	struct i2c_client *client = g0->i2c_bl;
+	struct i2c_msg msg[] = {
+		{
+			.addr	= client->addr,
+			.flags  = 0,
+			.len	= len,
+			.buf	= data,
+		},
+	};
+	int ret;
+
+	ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+	if (ret != ARRAY_SIZE(msg)) {
+		dev_err(g0->dev, "i2c bl send %02x, error: %d\n", client->addr, ret);
+
+		return ret < 0 ? ret : -EIO;
+	}
+
+	return ucsi_stm32g0_bl_check_ack(ucsi);
+}
+
+/* Bootloader commands */
+static int ucsi_stm32g0_bl_get_version(struct ucsi *ucsi, u8 *bl_version)
+{
+	int ret;
+
+	ret = ucsi_stm32g0_bl_cmd(ucsi, STM32_CMD_GVR);
+	if (ret)
+		return ret;
+
+	return ucsi_stm32g0_bl_rcv(ucsi, bl_version, STM32_CMD_GVR_LEN);
+}
+
+static int ucsi_stm32g0_bl_send_addr(struct ucsi *ucsi, u32 addr)
+{
+	u8 data8[STM32_CMD_ADDR_LEN];
+
+	/* Address format: 4 bytes addr (MSB first) + XOR'ed addr bytes */
+	put_unaligned_be32(addr, data8);
+	data8[4] = data8[0] ^ data8[1] ^ data8[2] ^ data8[3];
+
+	return ucsi_stm32g0_bl_send(ucsi, data8, STM32_CMD_ADDR_LEN);
+}
+
+static int ucsi_stm32g0_bl_global_mass_erase(struct ucsi *ucsi)
+{
+	u8 data8[4];
+	u16 *data16 = (u16 *)&data8[0];
+	int ret;
+
+	data16[0] = STM32_CMD_GLOBAL_MASS_ERASE;
+	data8[2] = data8[0] ^ data8[1];
+
+	ret = ucsi_stm32g0_bl_cmd(ucsi, STM32_CMD_ERASE);
+	if (ret)
+		return ret;
+
+	return ucsi_stm32g0_bl_send(ucsi, data8, STM32_CMD_ERASE_SPECIAL_LEN);
+}
+
+static int ucsi_stm32g0_bl_write(struct ucsi *ucsi, u32 addr, const void *data, size_t len)
+{
+	u8 *data8;
+	int i, ret;
+
+	if (!len || len > STM32G0_I2C_BL_SZ)
+		return -EINVAL;
+
+	/* Write memory: len bytes -1, data up to 256 bytes + XOR'ed bytes */
+	data8 = kmalloc(STM32G0_I2C_BL_SZ + 2, GFP_KERNEL);
+	if (!data8)
+		return -ENOMEM;
+
+	ret = ucsi_stm32g0_bl_cmd(ucsi, STM32_CMD_WM);
+	if (ret)
+		goto free;
+
+	ret = ucsi_stm32g0_bl_send_addr(ucsi, addr);
+	if (ret)
+		goto free;
+
+	data8[0] = len - 1;
+	memcpy(data8 + 1, data, len);
+	data8[len + 1] = data8[0];
+	for (i = 1; i <= len; i++)
+		data8[len + 1] ^= data8[i];
+
+	ret = ucsi_stm32g0_bl_send(ucsi, data8, len + 2);
+free:
+	kfree(data8);
+
+	return ret;
+}
+
+static int ucsi_stm32g0_bl_read(struct ucsi *ucsi, u32 addr, void *data, size_t len)
+{
+	int ret;
+
+	if (!len || len > STM32G0_I2C_BL_SZ)
+		return -EINVAL;
+
+	ret = ucsi_stm32g0_bl_cmd(ucsi, STM32_CMD_RM);
+	if (ret)
+		return ret;
+
+	ret = ucsi_stm32g0_bl_send_addr(ucsi, addr);
+	if (ret)
+		return ret;
+
+	ret = ucsi_stm32g0_bl_cmd(ucsi, len - 1);
+	if (ret)
+		return ret;
+
+	return ucsi_stm32g0_bl_rcv_woack(ucsi, data, len);
+}
+
+/* Firmware commands (the same address as the bootloader) */
+static int ucsi_stm32g0_fw_cmd(struct ucsi *ucsi, unsigned int cmd)
+{
+	return ucsi_stm32g0_bl_cmd_check_ack(ucsi, cmd, false);
+}
+
+static int ucsi_stm32g0_fw_rcv(struct ucsi *ucsi, void *data, size_t len)
+{
+	return ucsi_stm32g0_bl_rcv_woack(ucsi, data, len);
+}
+
+/* UCSI ops */
+static int ucsi_stm32g0_read(struct ucsi *ucsi, unsigned int offset, void *val, size_t len)
+{
+	struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi);
+	struct i2c_client *client = g0->client;
+	u8 reg = offset;
+	struct i2c_msg msg[] = {
+		{
+			.addr	= client->addr,
+			.flags  = 0,
+			.len	= 1,
+			.buf	= &reg,
+		},
+		{
+			.addr	= client->addr,
+			.flags  = I2C_M_RD,
+			.len	= len,
+			.buf	= val,
+		},
+	};
+	int ret;
+
+	ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+	if (ret != ARRAY_SIZE(msg)) {
+		dev_err(g0->dev, "i2c read %02x, %02x error: %d\n", client->addr, reg, ret);
+
+		return ret < 0 ? ret : -EIO;
+	}
+
+	return 0;
+}
+
+static int ucsi_stm32g0_async_write(struct ucsi *ucsi, unsigned int offset, const void *val,
+				    size_t len)
+{
+	struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi);
+	struct i2c_client *client = g0->client;
+	struct i2c_msg msg[] = {
+		{
+			.addr	= client->addr,
+			.flags  = 0,
+		}
+	};
+	unsigned char *buf;
+	int ret;
+
+	buf = kmalloc(len + 1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	buf[0] = offset;
+	memcpy(&buf[1], val, len);
+	msg[0].len = len + 1;
+	msg[0].buf = buf;
+
+	ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+	kfree(buf);
+	if (ret != ARRAY_SIZE(msg)) {
+		dev_err(g0->dev, "i2c write %02x, %02x error: %d\n", client->addr, offset, ret);
+
+		return ret < 0 ? ret : -EIO;
+	}
+
+	return 0;
+}
+
+static int ucsi_stm32g0_sync_write(struct ucsi *ucsi, unsigned int offset, const void *val,
+				   size_t len)
+{
+	struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi);
+	int ret;
+
+	set_bit(COMMAND_PENDING, &g0->flags);
+
+	ret = ucsi_stm32g0_async_write(ucsi, offset, val, len);
+	if (ret)
+		goto out_clear_bit;
+
+	if (!wait_for_completion_timeout(&g0->complete, msecs_to_jiffies(5000)))
+		ret = -ETIMEDOUT;
+
+out_clear_bit:
+	clear_bit(COMMAND_PENDING, &g0->flags);
+
+	return ret;
+}
+
+static irqreturn_t ucsi_stm32g0_irq_handler(int irq, void *data)
+{
+	struct ucsi_stm32g0 *g0 = data;
+	u32 cci;
+	int ret;
+
+	if (g0->suspended)
+		g0->wakeup_event = true;
+
+	ret = ucsi_stm32g0_read(g0->ucsi, UCSI_CCI, &cci, sizeof(cci));
+	if (ret)
+		return IRQ_NONE;
+
+	if (UCSI_CCI_CONNECTOR(cci))
+		ucsi_connector_change(g0->ucsi, UCSI_CCI_CONNECTOR(cci));
+
+	if (test_bit(COMMAND_PENDING, &g0->flags) &&
+	    cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))
+		complete(&g0->complete);
+
+	return IRQ_HANDLED;
+}
+
+static const struct ucsi_operations ucsi_stm32g0_ops = {
+	.read = ucsi_stm32g0_read,
+	.sync_write = ucsi_stm32g0_sync_write,
+	.async_write = ucsi_stm32g0_async_write,
+};
+
+static int ucsi_stm32g0_register(struct ucsi *ucsi)
+{
+	struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi);
+	struct i2c_client *client = g0->client;
+	int ret;
+
+	/* Request alert interrupt */
+	ret = request_threaded_irq(client->irq, NULL, ucsi_stm32g0_irq_handler, IRQF_ONESHOT,
+				   dev_name(g0->dev), g0);
+	if (ret) {
+		dev_err(g0->dev, "request IRQ failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = ucsi_register(ucsi);
+	if (ret) {
+		dev_err_probe(g0->dev, ret, "ucsi_register failed\n");
+		free_irq(client->irq, g0);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void ucsi_stm32g0_unregister(struct ucsi *ucsi)
+{
+	struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi);
+	struct i2c_client *client = g0->client;
+
+	ucsi_unregister(ucsi);
+	free_irq(client->irq, g0);
+}
+
+static void ucsi_stm32g0_fw_cb(const struct firmware *fw, void *context)
+{
+	struct ucsi_stm32g0 *g0;
+	const u8 *data, *end;
+	const struct ucsi_stm32g0_fw_info *fw_info;
+	u32 addr = STM32G0_MAIN_MEM_ADDR, ob, fw_version;
+	int ret, size;
+
+	if (!context)
+		return;
+
+	g0 = ucsi_get_drvdata(context);
+
+	if (!fw)
+		goto fw_release;
+
+	fw_info = (struct ucsi_stm32g0_fw_info *)(fw->data + fw->size - sizeof(*fw_info));
+
+	if (!g0->in_bootloader) {
+		/* Read running firmware version */
+		ret = ucsi_stm32g0_fw_cmd(g0->ucsi, STM32G0_FW_GETVER);
+		if (ret) {
+			dev_err(g0->dev, "Get version cmd failed %d\n", ret);
+			goto fw_release;
+		}
+		ret = ucsi_stm32g0_fw_rcv(g0->ucsi, &fw_version,
+					  STM32G0_FW_GETVER_LEN);
+		if (ret) {
+			dev_err(g0->dev, "Get version failed %d\n", ret);
+			goto fw_release;
+		}
+
+		/* Sanity check on keyword and firmware version */
+		if (fw_info->keyword != STM32G0_FW_KEYWORD || fw_info->version == fw_version)
+			goto fw_release;
+
+		dev_info(g0->dev, "Flashing FW: %08x (%08x cur)\n", fw_info->version, fw_version);
+
+		/* Switch to bootloader mode */
+		ucsi_stm32g0_unregister(g0->ucsi);
+		ret = ucsi_stm32g0_fw_cmd(g0->ucsi, STM32G0_FW_RSTGOBL);
+		if (ret) {
+			dev_err(g0->dev, "bootloader cmd failed %d\n", ret);
+			goto fw_release;
+		}
+		g0->in_bootloader = true;
+
+		/* STM32G0 reboot delay */
+		msleep(100);
+	}
+
+	ret = ucsi_stm32g0_bl_global_mass_erase(g0->ucsi);
+	if (ret) {
+		dev_err(g0->dev, "Erase failed %d\n", ret);
+		goto fw_release;
+	}
+
+	data = fw->data;
+	end = fw->data + fw->size;
+	while (data < end) {
+		if ((end - data) < STM32G0_I2C_BL_SZ)
+			size = end - data;
+		else
+			size = STM32G0_I2C_BL_SZ;
+
+		ret = ucsi_stm32g0_bl_write(g0->ucsi, addr, data, size);
+		if (ret) {
+			dev_err(g0->dev, "Write failed %d\n", ret);
+			goto fw_release;
+		}
+		addr += size;
+		data += size;
+	}
+
+	dev_dbg(g0->dev, "Configure to boot from main flash\n");
+
+	ret = ucsi_stm32g0_bl_read(g0->ucsi, STM32G0_USER_OPTION_BYTES, &ob, sizeof(ob));
+	if (ret) {
+		dev_err(g0->dev, "read user option bytes failed %d\n", ret);
+		goto fw_release;
+	}
+
+	dev_dbg(g0->dev, "STM32G0_USER_OPTION_BYTES 0x%08x\n", ob);
+
+	/* Configure user option bytes to boot from main flash next time */
+	ob |= STM32G0_USER_OB_BOOT_MAIN;
+
+	/* Writing option bytes will also reset G0 for updates to be loaded */
+	ret = ucsi_stm32g0_bl_write(g0->ucsi, STM32G0_USER_OPTION_BYTES, &ob, sizeof(ob));
+	if (ret) {
+		dev_err(g0->dev, "write user option bytes failed %d\n", ret);
+		goto fw_release;
+	}
+
+	dev_info(g0->dev, "Starting, option bytes:0x%08x\n", ob);
+
+	/* STM32G0 FW boot delay */
+	msleep(500);
+
+	/* Register UCSI interface */
+	if (!ucsi_stm32g0_register(g0->ucsi))
+		g0->in_bootloader = false;
+
+fw_release:
+	release_firmware(fw);
+}
+
+static int ucsi_stm32g0_probe_bootloader(struct ucsi *ucsi)
+{
+	struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi);
+	int ret;
+	u16 ucsi_version;
+
+	/* firmware-name is optional */
+	if (device_property_present(g0->dev, "firmware-name")) {
+		ret = device_property_read_string(g0->dev, "firmware-name", &g0->fw_name);
+		if (ret < 0)
+			return dev_err_probe(g0->dev, ret, "Error reading firmware-name\n");
+	}
+
+	if (g0->fw_name) {
+		/* STM32G0 in bootloader mode communicates at reserved address 0x51 */
+		g0->i2c_bl = i2c_new_dummy_device(g0->client->adapter, STM32G0_I2C_BL_ADDR);
+		if (IS_ERR(g0->i2c_bl)) {
+			ret = dev_err_probe(g0->dev, PTR_ERR(g0->i2c_bl),
+					    "Failed to register bootloader I2C address\n");
+			return ret;
+		}
+	}
+
+	/*
+	 * Try to guess if the STM32G0 is running a UCSI firmware. First probe the UCSI FW at its
+	 * i2c address. Fallback to bootloader i2c address only if firmware-name is specified.
+	 */
+	ret = ucsi_stm32g0_read(ucsi, UCSI_VERSION, &ucsi_version, sizeof(ucsi_version));
+	if (!ret || !g0->fw_name)
+		return ret;
+
+	/* Speculatively read the bootloader version that has a known length. */
+	ret = ucsi_stm32g0_bl_get_version(ucsi, &g0->bl_version);
+	if (ret < 0) {
+		i2c_unregister_device(g0->i2c_bl);
+		return ret;
+	}
+
+	/* Device in bootloader mode */
+	g0->in_bootloader = true;
+	dev_info(g0->dev, "Bootloader Version 0x%02x\n", g0->bl_version);
+
+	return 0;
+}
+
+static int ucsi_stm32g0_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct ucsi_stm32g0 *g0;
+	int ret;
+
+	g0 = devm_kzalloc(dev, sizeof(*g0), GFP_KERNEL);
+	if (!g0)
+		return -ENOMEM;
+
+	g0->dev = dev;
+	g0->client = client;
+	init_completion(&g0->complete);
+	i2c_set_clientdata(client, g0);
+
+	g0->ucsi = ucsi_create(dev, &ucsi_stm32g0_ops);
+	if (IS_ERR(g0->ucsi))
+		return PTR_ERR(g0->ucsi);
+
+	ucsi_set_drvdata(g0->ucsi, g0);
+
+	ret = ucsi_stm32g0_probe_bootloader(g0->ucsi);
+	if (ret < 0)
+		goto destroy;
+
+	/*
+	 * Don't register in bootloader mode: wait for the firmware to be loaded and started before
+	 * registering UCSI device.
+	 */
+	if (!g0->in_bootloader) {
+		ret = ucsi_stm32g0_register(g0->ucsi);
+		if (ret < 0)
+			goto freei2c;
+	}
+
+	if (g0->fw_name) {
+		/*
+		 * Asynchronously flash (e.g. bootloader mode) or update the running firmware,
+		 * not to hang the boot process
+		 */
+		ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, g0->fw_name, g0->dev,
+					      GFP_KERNEL, g0->ucsi, ucsi_stm32g0_fw_cb);
+		if (ret < 0) {
+			dev_err_probe(dev, ret, "firmware request failed\n");
+			goto unregister;
+		}
+	}
+
+	return 0;
+
+unregister:
+	if (!g0->in_bootloader)
+		ucsi_stm32g0_unregister(g0->ucsi);
+freei2c:
+	if (g0->fw_name)
+		i2c_unregister_device(g0->i2c_bl);
+destroy:
+	ucsi_destroy(g0->ucsi);
+
+	return ret;
+}
+
+static void ucsi_stm32g0_remove(struct i2c_client *client)
+{
+	struct ucsi_stm32g0 *g0 = i2c_get_clientdata(client);
+
+	if (!g0->in_bootloader)
+		ucsi_stm32g0_unregister(g0->ucsi);
+	if (g0->fw_name)
+		i2c_unregister_device(g0->i2c_bl);
+	ucsi_destroy(g0->ucsi);
+}
+
+static int ucsi_stm32g0_suspend(struct device *dev)
+{
+	struct ucsi_stm32g0 *g0 = dev_get_drvdata(dev);
+	struct i2c_client *client = g0->client;
+
+	if (g0->in_bootloader)
+		return 0;
+
+	/* Keep the interrupt disabled until the i2c bus has been resumed */
+	disable_irq(client->irq);
+
+	g0->suspended = true;
+	g0->wakeup_event = false;
+
+	if (device_may_wakeup(dev) || device_wakeup_path(dev))
+		enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static int ucsi_stm32g0_resume(struct device *dev)
+{
+	struct ucsi_stm32g0 *g0 = dev_get_drvdata(dev);
+	struct i2c_client *client = g0->client;
+
+	if (g0->in_bootloader)
+		return 0;
+
+	if (device_may_wakeup(dev) || device_wakeup_path(dev))
+		disable_irq_wake(client->irq);
+
+	enable_irq(client->irq);
+
+	/* Enforce any pending handler gets called to signal a wakeup_event */
+	synchronize_irq(client->irq);
+
+	if (g0->wakeup_event)
+		pm_wakeup_event(g0->dev, 0);
+
+	g0->suspended = false;
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(ucsi_stm32g0_pm_ops, ucsi_stm32g0_suspend, ucsi_stm32g0_resume);
+
+static const struct of_device_id __maybe_unused ucsi_stm32g0_typec_of_match[] = {
+	{ .compatible = "st,stm32g0-typec" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ucsi_stm32g0_typec_of_match);
+
+static const struct i2c_device_id ucsi_stm32g0_typec_i2c_devid[] = {
+	{"stm32g0-typec", 0},
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, ucsi_stm32g0_typec_i2c_devid);
+
+static struct i2c_driver ucsi_stm32g0_i2c_driver = {
+	.driver = {
+		.name = "ucsi-stm32g0-i2c",
+		.of_match_table = of_match_ptr(ucsi_stm32g0_typec_of_match),
+		.pm = pm_sleep_ptr(&ucsi_stm32g0_pm_ops),
+	},
+	.probe = ucsi_stm32g0_probe,
+	.remove = ucsi_stm32g0_remove,
+	.id_table = ucsi_stm32g0_typec_i2c_devid
+};
+module_i2c_driver(ucsi_stm32g0_i2c_driver);
+
+MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@foss.st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32G0 Type-C controller");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_ALIAS("platform:ucsi-stm32g0");
diff --git a/drivers/usb/typec/wusb3801.c b/drivers/usb/typec/wusb3801.c
new file mode 100644
index 000000000..a43a18d4b
--- /dev/null
+++ b/drivers/usb/typec/wusb3801.c
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Willsemi WUSB3801 Type-C port controller driver
+ *
+ * Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/typec.h>
+
+#define WUSB3801_REG_DEVICE_ID		0x01
+#define WUSB3801_REG_CTRL0		0x02
+#define WUSB3801_REG_INT		0x03
+#define WUSB3801_REG_STAT		0x04
+#define WUSB3801_REG_CTRL1		0x05
+#define WUSB3801_REG_TEST00		0x06
+#define WUSB3801_REG_TEST01		0x07
+#define WUSB3801_REG_TEST02		0x08
+#define WUSB3801_REG_TEST03		0x09
+#define WUSB3801_REG_TEST04		0x0a
+#define WUSB3801_REG_TEST05		0x0b
+#define WUSB3801_REG_TEST06		0x0c
+#define WUSB3801_REG_TEST07		0x0d
+#define WUSB3801_REG_TEST08		0x0e
+#define WUSB3801_REG_TEST09		0x0f
+#define WUSB3801_REG_TEST0A		0x10
+#define WUSB3801_REG_TEST0B		0x11
+#define WUSB3801_REG_TEST0C		0x12
+#define WUSB3801_REG_TEST0D		0x13
+#define WUSB3801_REG_TEST0E		0x14
+#define WUSB3801_REG_TEST0F		0x15
+#define WUSB3801_REG_TEST10		0x16
+#define WUSB3801_REG_TEST11		0x17
+#define WUSB3801_REG_TEST12		0x18
+
+#define WUSB3801_DEVICE_ID_VERSION_ID	GENMASK(7, 3)
+#define WUSB3801_DEVICE_ID_VENDOR_ID	GENMASK(2, 0)
+
+#define WUSB3801_CTRL0_DIS_ACC_SUPPORT	BIT(7)
+#define WUSB3801_CTRL0_TRY		GENMASK(6, 5)
+#define WUSB3801_CTRL0_TRY_NONE		(0x0 << 5)
+#define WUSB3801_CTRL0_TRY_SNK		(0x1 << 5)
+#define WUSB3801_CTRL0_TRY_SRC		(0x2 << 5)
+#define WUSB3801_CTRL0_CURRENT		GENMASK(4, 3) /* SRC */
+#define WUSB3801_CTRL0_CURRENT_DEFAULT	(0x0 << 3)
+#define WUSB3801_CTRL0_CURRENT_1_5A	(0x1 << 3)
+#define WUSB3801_CTRL0_CURRENT_3_0A	(0x2 << 3)
+#define WUSB3801_CTRL0_ROLE		GENMASK(2, 1)
+#define WUSB3801_CTRL0_ROLE_SNK		(0x0 << 1)
+#define WUSB3801_CTRL0_ROLE_SRC		(0x1 << 1)
+#define WUSB3801_CTRL0_ROLE_DRP		(0x2 << 1)
+#define WUSB3801_CTRL0_INT_MASK		BIT(0)
+
+#define WUSB3801_INT_ATTACHED		BIT(0)
+#define WUSB3801_INT_DETACHED		BIT(1)
+
+#define WUSB3801_STAT_VBUS_DETECTED	BIT(7)
+#define WUSB3801_STAT_CURRENT		GENMASK(6, 5) /* SNK */
+#define WUSB3801_STAT_CURRENT_STANDBY	(0x0 << 5)
+#define WUSB3801_STAT_CURRENT_DEFAULT	(0x1 << 5)
+#define WUSB3801_STAT_CURRENT_1_5A	(0x2 << 5)
+#define WUSB3801_STAT_CURRENT_3_0A	(0x3 << 5)
+#define WUSB3801_STAT_PARTNER		GENMASK(4, 2)
+#define WUSB3801_STAT_PARTNER_STANDBY	(0x0 << 2)
+#define WUSB3801_STAT_PARTNER_SNK	(0x1 << 2)
+#define WUSB3801_STAT_PARTNER_SRC	(0x2 << 2)
+#define WUSB3801_STAT_PARTNER_AUDIO	(0x3 << 2)
+#define WUSB3801_STAT_PARTNER_DEBUG	(0x4 << 2)
+#define WUSB3801_STAT_ORIENTATION	GENMASK(1, 0)
+#define WUSB3801_STAT_ORIENTATION_NONE	(0x0 << 0)
+#define WUSB3801_STAT_ORIENTATION_CC1	(0x1 << 0)
+#define WUSB3801_STAT_ORIENTATION_CC2	(0x2 << 0)
+#define WUSB3801_STAT_ORIENTATION_BOTH	(0x3 << 0)
+
+#define WUSB3801_CTRL1_SM_RESET		BIT(0)
+
+#define WUSB3801_TEST01_VENDOR_SUB_ID	(BIT(8) | BIT(6))
+
+#define WUSB3801_TEST02_FORCE_ERR_RCY	BIT(8)
+
+#define WUSB3801_TEST0A_WAIT_VBUS	BIT(5)
+
+struct wusb3801 {
+	struct typec_capability	cap;
+	struct device		*dev;
+	struct typec_partner	*partner;
+	struct typec_port	*port;
+	struct regmap		*regmap;
+	struct regulator	*vbus_supply;
+	unsigned int		partner_type;
+	enum typec_port_type	port_type;
+	enum typec_pwr_opmode	pwr_opmode;
+	bool			vbus_on;
+};
+
+static enum typec_role wusb3801_get_default_role(struct wusb3801 *wusb3801)
+{
+	switch (wusb3801->port_type) {
+	case TYPEC_PORT_SRC:
+		return TYPEC_SOURCE;
+	case TYPEC_PORT_SNK:
+		return TYPEC_SINK;
+	case TYPEC_PORT_DRP:
+	default:
+		if (wusb3801->cap.prefer_role == TYPEC_SOURCE)
+			return TYPEC_SOURCE;
+		return TYPEC_SINK;
+	}
+}
+
+static int wusb3801_map_port_type(enum typec_port_type type)
+{
+	switch (type) {
+	case TYPEC_PORT_SRC:
+		return WUSB3801_CTRL0_ROLE_SRC;
+	case TYPEC_PORT_SNK:
+		return WUSB3801_CTRL0_ROLE_SNK;
+	case TYPEC_PORT_DRP:
+	default:
+		return WUSB3801_CTRL0_ROLE_DRP;
+	}
+}
+
+static int wusb3801_map_pwr_opmode(enum typec_pwr_opmode mode)
+{
+	switch (mode) {
+	case TYPEC_PWR_MODE_USB:
+	default:
+		return WUSB3801_CTRL0_CURRENT_DEFAULT;
+	case TYPEC_PWR_MODE_1_5A:
+		return WUSB3801_CTRL0_CURRENT_1_5A;
+	case TYPEC_PWR_MODE_3_0A:
+		return WUSB3801_CTRL0_CURRENT_3_0A;
+	}
+}
+
+static unsigned int wusb3801_map_try_role(int role)
+{
+	switch (role) {
+	case TYPEC_NO_PREFERRED_ROLE:
+	default:
+		return WUSB3801_CTRL0_TRY_NONE;
+	case TYPEC_SINK:
+		return WUSB3801_CTRL0_TRY_SNK;
+	case TYPEC_SOURCE:
+		return WUSB3801_CTRL0_TRY_SRC;
+	}
+}
+
+static enum typec_orientation wusb3801_unmap_orientation(unsigned int status)
+{
+	switch (status & WUSB3801_STAT_ORIENTATION) {
+	case WUSB3801_STAT_ORIENTATION_NONE:
+	case WUSB3801_STAT_ORIENTATION_BOTH:
+	default:
+		return TYPEC_ORIENTATION_NONE;
+	case WUSB3801_STAT_ORIENTATION_CC1:
+		return TYPEC_ORIENTATION_NORMAL;
+	case WUSB3801_STAT_ORIENTATION_CC2:
+		return TYPEC_ORIENTATION_REVERSE;
+	}
+}
+
+static enum typec_pwr_opmode wusb3801_unmap_pwr_opmode(unsigned int status)
+{
+	switch (status & WUSB3801_STAT_CURRENT) {
+	case WUSB3801_STAT_CURRENT_STANDBY:
+	case WUSB3801_STAT_CURRENT_DEFAULT:
+	default:
+		return TYPEC_PWR_MODE_USB;
+	case WUSB3801_STAT_CURRENT_1_5A:
+		return TYPEC_PWR_MODE_1_5A;
+	case WUSB3801_STAT_CURRENT_3_0A:
+		return TYPEC_PWR_MODE_3_0A;
+	}
+}
+
+static int wusb3801_try_role(struct typec_port *port, int role)
+{
+	struct wusb3801 *wusb3801 = typec_get_drvdata(port);
+
+	return regmap_update_bits(wusb3801->regmap, WUSB3801_REG_CTRL0,
+				  WUSB3801_CTRL0_TRY,
+				  wusb3801_map_try_role(role));
+}
+
+static int wusb3801_port_type_set(struct typec_port *port,
+				  enum typec_port_type type)
+{
+	struct wusb3801 *wusb3801 = typec_get_drvdata(port);
+	int ret;
+
+	ret = regmap_update_bits(wusb3801->regmap, WUSB3801_REG_CTRL0,
+				 WUSB3801_CTRL0_ROLE,
+				 wusb3801_map_port_type(type));
+	if (ret)
+		return ret;
+
+	wusb3801->port_type = type;
+
+	return 0;
+}
+
+static const struct typec_operations wusb3801_typec_ops = {
+	.try_role	= wusb3801_try_role,
+	.port_type_set	= wusb3801_port_type_set,
+};
+
+static int wusb3801_hw_init(struct wusb3801 *wusb3801)
+{
+	return regmap_write(wusb3801->regmap, WUSB3801_REG_CTRL0,
+			    wusb3801_map_try_role(wusb3801->cap.prefer_role) |
+			    wusb3801_map_pwr_opmode(wusb3801->pwr_opmode) |
+			    wusb3801_map_port_type(wusb3801->port_type));
+}
+
+static void wusb3801_hw_update(struct wusb3801 *wusb3801)
+{
+	struct typec_port *port = wusb3801->port;
+	struct device *dev = wusb3801->dev;
+	unsigned int partner_type, status;
+	int ret;
+
+	ret = regmap_read(wusb3801->regmap, WUSB3801_REG_STAT, &status);
+	if (ret) {
+		dev_warn(dev, "Failed to read port status: %d\n", ret);
+		status = 0;
+	}
+	dev_dbg(dev, "status = 0x%02x\n", status);
+
+	partner_type = status & WUSB3801_STAT_PARTNER;
+
+	if (partner_type == WUSB3801_STAT_PARTNER_SNK) {
+		if (!wusb3801->vbus_on) {
+			ret = regulator_enable(wusb3801->vbus_supply);
+			if (ret)
+				dev_warn(dev, "Failed to enable VBUS: %d\n", ret);
+			wusb3801->vbus_on = true;
+		}
+	} else {
+		if (wusb3801->vbus_on) {
+			regulator_disable(wusb3801->vbus_supply);
+			wusb3801->vbus_on = false;
+		}
+	}
+
+	if (partner_type != wusb3801->partner_type) {
+		struct typec_partner_desc desc = {};
+		enum typec_data_role data_role;
+		enum typec_role pwr_role = wusb3801_get_default_role(wusb3801);
+
+		switch (partner_type) {
+		case WUSB3801_STAT_PARTNER_STANDBY:
+			break;
+		case WUSB3801_STAT_PARTNER_SNK:
+			pwr_role = TYPEC_SOURCE;
+			break;
+		case WUSB3801_STAT_PARTNER_SRC:
+			pwr_role = TYPEC_SINK;
+			break;
+		case WUSB3801_STAT_PARTNER_AUDIO:
+			desc.accessory = TYPEC_ACCESSORY_AUDIO;
+			break;
+		case WUSB3801_STAT_PARTNER_DEBUG:
+			desc.accessory = TYPEC_ACCESSORY_DEBUG;
+			break;
+		}
+
+		if (wusb3801->partner) {
+			typec_unregister_partner(wusb3801->partner);
+			wusb3801->partner = NULL;
+		}
+
+		if (partner_type != WUSB3801_STAT_PARTNER_STANDBY) {
+			wusb3801->partner = typec_register_partner(port, &desc);
+			if (IS_ERR(wusb3801->partner))
+				dev_err(dev, "Failed to register partner: %ld\n",
+					PTR_ERR(wusb3801->partner));
+		}
+
+		data_role = pwr_role == TYPEC_SOURCE ? TYPEC_HOST : TYPEC_DEVICE;
+		typec_set_data_role(port, data_role);
+		typec_set_pwr_role(port, pwr_role);
+		typec_set_vconn_role(port, pwr_role);
+	}
+
+	typec_set_pwr_opmode(wusb3801->port,
+			     partner_type == WUSB3801_STAT_PARTNER_SRC
+				? wusb3801_unmap_pwr_opmode(status)
+				: wusb3801->pwr_opmode);
+	typec_set_orientation(wusb3801->port,
+			      wusb3801_unmap_orientation(status));
+
+	wusb3801->partner_type = partner_type;
+}
+
+static irqreturn_t wusb3801_irq(int irq, void *data)
+{
+	struct wusb3801 *wusb3801 = data;
+	unsigned int dummy;
+
+	/*
+	 * The interrupt register must be read in order to clear the IRQ,
+	 * but all of the useful information is in the status register.
+	 */
+	regmap_read(wusb3801->regmap, WUSB3801_REG_INT, &dummy);
+
+	wusb3801_hw_update(wusb3801);
+
+	return IRQ_HANDLED;
+}
+
+static const struct regmap_config config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= WUSB3801_REG_TEST12,
+};
+
+static int wusb3801_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct fwnode_handle *connector;
+	struct wusb3801 *wusb3801;
+	const char *cap_str;
+	int ret;
+
+	wusb3801 = devm_kzalloc(dev, sizeof(*wusb3801), GFP_KERNEL);
+	if (!wusb3801)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, wusb3801);
+
+	wusb3801->dev = dev;
+
+	wusb3801->regmap = devm_regmap_init_i2c(client, &config);
+	if (IS_ERR(wusb3801->regmap))
+		return PTR_ERR(wusb3801->regmap);
+
+	wusb3801->vbus_supply = devm_regulator_get(dev, "vbus");
+	if (IS_ERR(wusb3801->vbus_supply))
+		return PTR_ERR(wusb3801->vbus_supply);
+
+	connector = device_get_named_child_node(dev, "connector");
+	if (!connector)
+		return -ENODEV;
+
+	ret = typec_get_fw_cap(&wusb3801->cap, connector);
+	if (ret)
+		goto err_put_connector;
+	wusb3801->port_type = wusb3801->cap.type;
+
+	ret = fwnode_property_read_string(connector, "typec-power-opmode", &cap_str);
+	if (ret)
+		goto err_put_connector;
+
+	ret = typec_find_pwr_opmode(cap_str);
+	if (ret < 0 || ret == TYPEC_PWR_MODE_PD)
+		goto err_put_connector;
+	wusb3801->pwr_opmode = ret;
+
+	/* Initialize the hardware with the devicetree settings. */
+	ret = wusb3801_hw_init(wusb3801);
+	if (ret)
+		goto err_put_connector;
+
+	wusb3801->cap.revision		= USB_TYPEC_REV_1_2;
+	wusb3801->cap.accessory[0]	= TYPEC_ACCESSORY_AUDIO;
+	wusb3801->cap.accessory[1]	= TYPEC_ACCESSORY_DEBUG;
+	wusb3801->cap.orientation_aware	= true;
+	wusb3801->cap.driver_data	= wusb3801;
+	wusb3801->cap.ops		= &wusb3801_typec_ops;
+
+	wusb3801->port = typec_register_port(dev, &wusb3801->cap);
+	if (IS_ERR(wusb3801->port)) {
+		ret = PTR_ERR(wusb3801->port);
+		goto err_put_connector;
+	}
+
+	/* Initialize the port attributes from the hardware state. */
+	wusb3801_hw_update(wusb3801);
+
+	ret = request_threaded_irq(client->irq, NULL, wusb3801_irq,
+				   IRQF_ONESHOT, dev_name(dev), wusb3801);
+	if (ret)
+		goto err_unregister_port;
+
+	fwnode_handle_put(connector);
+
+	return 0;
+
+err_unregister_port:
+	typec_unregister_port(wusb3801->port);
+err_put_connector:
+	fwnode_handle_put(connector);
+
+	return ret;
+}
+
+static void wusb3801_remove(struct i2c_client *client)
+{
+	struct wusb3801 *wusb3801 = i2c_get_clientdata(client);
+
+	free_irq(client->irq, wusb3801);
+
+	if (wusb3801->partner)
+		typec_unregister_partner(wusb3801->partner);
+	typec_unregister_port(wusb3801->port);
+
+	if (wusb3801->vbus_on)
+		regulator_disable(wusb3801->vbus_supply);
+}
+
+static const struct of_device_id wusb3801_of_match[] = {
+	{ .compatible = "willsemi,wusb3801" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, wusb3801_of_match);
+
+static struct i2c_driver wusb3801_driver = {
+	.probe_new	= wusb3801_probe,
+	.remove		= wusb3801_remove,
+	.driver		= {
+		.name		= "wusb3801",
+		.of_match_table	= wusb3801_of_match,
+	},
+};
+
+module_i2c_driver(wusb3801_driver);
+
+MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
+MODULE_DESCRIPTION("Willsemi WUSB3801 Type-C port controller driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
new file mode 100644
index 000000000..d87deee3e
--- /dev/null
+++ b/drivers/usb/usb-skeleton.c
@@ -0,0 +1,646 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Skeleton driver - 2.2
+ *
+ * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * This driver is based on the 2.6.3 version of drivers/usb/usb-skeleton.c
+ * but has been rewritten to be easier to read and use.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kref.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/mutex.h>
+
+
+/* Define these values to match your devices */
+#define USB_SKEL_VENDOR_ID	0xfff0
+#define USB_SKEL_PRODUCT_ID	0xfff0
+
+/* table of devices that work with this driver */
+static const struct usb_device_id skel_table[] = {
+	{ USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) },
+	{ }					/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, skel_table);
+
+
+/* Get a minor range for your devices from the usb maintainer */
+#define USB_SKEL_MINOR_BASE	192
+
+/* our private defines. if this grows any larger, use your own .h file */
+#define MAX_TRANSFER		(PAGE_SIZE - 512)
+/*
+ * MAX_TRANSFER is chosen so that the VM is not stressed by
+ * allocations > PAGE_SIZE and the number of packets in a page
+ * is an integer 512 is the largest possible packet on EHCI
+ */
+#define WRITES_IN_FLIGHT	8
+/* arbitrarily chosen */
+
+/* Structure to hold all of our device specific stuff */
+struct usb_skel {
+	struct usb_device	*udev;			/* the usb device for this device */
+	struct usb_interface	*interface;		/* the interface for this device */
+	struct semaphore	limit_sem;		/* limiting the number of writes in progress */
+	struct usb_anchor	submitted;		/* in case we need to retract our submissions */
+	struct urb		*bulk_in_urb;		/* the urb to read data with */
+	unsigned char           *bulk_in_buffer;	/* the buffer to receive data */
+	size_t			bulk_in_size;		/* the size of the receive buffer */
+	size_t			bulk_in_filled;		/* number of bytes in the buffer */
+	size_t			bulk_in_copied;		/* already copied to user space */
+	__u8			bulk_in_endpointAddr;	/* the address of the bulk in endpoint */
+	__u8			bulk_out_endpointAddr;	/* the address of the bulk out endpoint */
+	int			errors;			/* the last request tanked */
+	bool			ongoing_read;		/* a read is going on */
+	spinlock_t		err_lock;		/* lock for errors */
+	struct kref		kref;
+	struct mutex		io_mutex;		/* synchronize I/O with disconnect */
+	unsigned long		disconnected:1;
+	wait_queue_head_t	bulk_in_wait;		/* to wait for an ongoing read */
+};
+#define to_skel_dev(d) container_of(d, struct usb_skel, kref)
+
+static struct usb_driver skel_driver;
+static void skel_draw_down(struct usb_skel *dev);
+
+static void skel_delete(struct kref *kref)
+{
+	struct usb_skel *dev = to_skel_dev(kref);
+
+	usb_free_urb(dev->bulk_in_urb);
+	usb_put_intf(dev->interface);
+	usb_put_dev(dev->udev);
+	kfree(dev->bulk_in_buffer);
+	kfree(dev);
+}
+
+static int skel_open(struct inode *inode, struct file *file)
+{
+	struct usb_skel *dev;
+	struct usb_interface *interface;
+	int subminor;
+	int retval = 0;
+
+	subminor = iminor(inode);
+
+	interface = usb_find_interface(&skel_driver, subminor);
+	if (!interface) {
+		pr_err("%s - error, can't find device for minor %d\n",
+			__func__, subminor);
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	dev = usb_get_intfdata(interface);
+	if (!dev) {
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	retval = usb_autopm_get_interface(interface);
+	if (retval)
+		goto exit;
+
+	/* increment our usage count for the device */
+	kref_get(&dev->kref);
+
+	/* save our object in the file's private structure */
+	file->private_data = dev;
+
+exit:
+	return retval;
+}
+
+static int skel_release(struct inode *inode, struct file *file)
+{
+	struct usb_skel *dev;
+
+	dev = file->private_data;
+	if (dev == NULL)
+		return -ENODEV;
+
+	/* allow the device to be autosuspended */
+	usb_autopm_put_interface(dev->interface);
+
+	/* decrement the count on our device */
+	kref_put(&dev->kref, skel_delete);
+	return 0;
+}
+
+static int skel_flush(struct file *file, fl_owner_t id)
+{
+	struct usb_skel *dev;
+	int res;
+
+	dev = file->private_data;
+	if (dev == NULL)
+		return -ENODEV;
+
+	/* wait for io to stop */
+	mutex_lock(&dev->io_mutex);
+	skel_draw_down(dev);
+
+	/* read out errors, leave subsequent opens a clean slate */
+	spin_lock_irq(&dev->err_lock);
+	res = dev->errors ? (dev->errors == -EPIPE ? -EPIPE : -EIO) : 0;
+	dev->errors = 0;
+	spin_unlock_irq(&dev->err_lock);
+
+	mutex_unlock(&dev->io_mutex);
+
+	return res;
+}
+
+static void skel_read_bulk_callback(struct urb *urb)
+{
+	struct usb_skel *dev;
+	unsigned long flags;
+
+	dev = urb->context;
+
+	spin_lock_irqsave(&dev->err_lock, flags);
+	/* sync/async unlink faults aren't errors */
+	if (urb->status) {
+		if (!(urb->status == -ENOENT ||
+		    urb->status == -ECONNRESET ||
+		    urb->status == -ESHUTDOWN))
+			dev_err(&dev->interface->dev,
+				"%s - nonzero write bulk status received: %d\n",
+				__func__, urb->status);
+
+		dev->errors = urb->status;
+	} else {
+		dev->bulk_in_filled = urb->actual_length;
+	}
+	dev->ongoing_read = 0;
+	spin_unlock_irqrestore(&dev->err_lock, flags);
+
+	wake_up_interruptible(&dev->bulk_in_wait);
+}
+
+static int skel_do_read_io(struct usb_skel *dev, size_t count)
+{
+	int rv;
+
+	/* prepare a read */
+	usb_fill_bulk_urb(dev->bulk_in_urb,
+			dev->udev,
+			usb_rcvbulkpipe(dev->udev,
+				dev->bulk_in_endpointAddr),
+			dev->bulk_in_buffer,
+			min(dev->bulk_in_size, count),
+			skel_read_bulk_callback,
+			dev);
+	/* tell everybody to leave the URB alone */
+	spin_lock_irq(&dev->err_lock);
+	dev->ongoing_read = 1;
+	spin_unlock_irq(&dev->err_lock);
+
+	/* submit bulk in urb, which means no data to deliver */
+	dev->bulk_in_filled = 0;
+	dev->bulk_in_copied = 0;
+
+	/* do it */
+	rv = usb_submit_urb(dev->bulk_in_urb, GFP_KERNEL);
+	if (rv < 0) {
+		dev_err(&dev->interface->dev,
+			"%s - failed submitting read urb, error %d\n",
+			__func__, rv);
+		rv = (rv == -ENOMEM) ? rv : -EIO;
+		spin_lock_irq(&dev->err_lock);
+		dev->ongoing_read = 0;
+		spin_unlock_irq(&dev->err_lock);
+	}
+
+	return rv;
+}
+
+static ssize_t skel_read(struct file *file, char *buffer, size_t count,
+			 loff_t *ppos)
+{
+	struct usb_skel *dev;
+	int rv;
+	bool ongoing_io;
+
+	dev = file->private_data;
+
+	if (!count)
+		return 0;
+
+	/* no concurrent readers */
+	rv = mutex_lock_interruptible(&dev->io_mutex);
+	if (rv < 0)
+		return rv;
+
+	if (dev->disconnected) {		/* disconnect() was called */
+		rv = -ENODEV;
+		goto exit;
+	}
+
+	/* if IO is under way, we must not touch things */
+retry:
+	spin_lock_irq(&dev->err_lock);
+	ongoing_io = dev->ongoing_read;
+	spin_unlock_irq(&dev->err_lock);
+
+	if (ongoing_io) {
+		/* nonblocking IO shall not wait */
+		if (file->f_flags & O_NONBLOCK) {
+			rv = -EAGAIN;
+			goto exit;
+		}
+		/*
+		 * IO may take forever
+		 * hence wait in an interruptible state
+		 */
+		rv = wait_event_interruptible(dev->bulk_in_wait, (!dev->ongoing_read));
+		if (rv < 0)
+			goto exit;
+	}
+
+	/* errors must be reported */
+	rv = dev->errors;
+	if (rv < 0) {
+		/* any error is reported once */
+		dev->errors = 0;
+		/* to preserve notifications about reset */
+		rv = (rv == -EPIPE) ? rv : -EIO;
+		/* report it */
+		goto exit;
+	}
+
+	/*
+	 * if the buffer is filled we may satisfy the read
+	 * else we need to start IO
+	 */
+
+	if (dev->bulk_in_filled) {
+		/* we had read data */
+		size_t available = dev->bulk_in_filled - dev->bulk_in_copied;
+		size_t chunk = min(available, count);
+
+		if (!available) {
+			/*
+			 * all data has been used
+			 * actual IO needs to be done
+			 */
+			rv = skel_do_read_io(dev, count);
+			if (rv < 0)
+				goto exit;
+			else
+				goto retry;
+		}
+		/*
+		 * data is available
+		 * chunk tells us how much shall be copied
+		 */
+
+		if (copy_to_user(buffer,
+				 dev->bulk_in_buffer + dev->bulk_in_copied,
+				 chunk))
+			rv = -EFAULT;
+		else
+			rv = chunk;
+
+		dev->bulk_in_copied += chunk;
+
+		/*
+		 * if we are asked for more than we have,
+		 * we start IO but don't wait
+		 */
+		if (available < count)
+			skel_do_read_io(dev, count - chunk);
+	} else {
+		/* no data in the buffer */
+		rv = skel_do_read_io(dev, count);
+		if (rv < 0)
+			goto exit;
+		else
+			goto retry;
+	}
+exit:
+	mutex_unlock(&dev->io_mutex);
+	return rv;
+}
+
+static void skel_write_bulk_callback(struct urb *urb)
+{
+	struct usb_skel *dev;
+	unsigned long flags;
+
+	dev = urb->context;
+
+	/* sync/async unlink faults aren't errors */
+	if (urb->status) {
+		if (!(urb->status == -ENOENT ||
+		    urb->status == -ECONNRESET ||
+		    urb->status == -ESHUTDOWN))
+			dev_err(&dev->interface->dev,
+				"%s - nonzero write bulk status received: %d\n",
+				__func__, urb->status);
+
+		spin_lock_irqsave(&dev->err_lock, flags);
+		dev->errors = urb->status;
+		spin_unlock_irqrestore(&dev->err_lock, flags);
+	}
+
+	/* free up our allocated buffer */
+	usb_free_coherent(urb->dev, urb->transfer_buffer_length,
+			  urb->transfer_buffer, urb->transfer_dma);
+	up(&dev->limit_sem);
+}
+
+static ssize_t skel_write(struct file *file, const char *user_buffer,
+			  size_t count, loff_t *ppos)
+{
+	struct usb_skel *dev;
+	int retval = 0;
+	struct urb *urb = NULL;
+	char *buf = NULL;
+	size_t writesize = min_t(size_t, count, MAX_TRANSFER);
+
+	dev = file->private_data;
+
+	/* verify that we actually have some data to write */
+	if (count == 0)
+		goto exit;
+
+	/*
+	 * limit the number of URBs in flight to stop a user from using up all
+	 * RAM
+	 */
+	if (!(file->f_flags & O_NONBLOCK)) {
+		if (down_interruptible(&dev->limit_sem)) {
+			retval = -ERESTARTSYS;
+			goto exit;
+		}
+	} else {
+		if (down_trylock(&dev->limit_sem)) {
+			retval = -EAGAIN;
+			goto exit;
+		}
+	}
+
+	spin_lock_irq(&dev->err_lock);
+	retval = dev->errors;
+	if (retval < 0) {
+		/* any error is reported once */
+		dev->errors = 0;
+		/* to preserve notifications about reset */
+		retval = (retval == -EPIPE) ? retval : -EIO;
+	}
+	spin_unlock_irq(&dev->err_lock);
+	if (retval < 0)
+		goto error;
+
+	/* create a urb, and a buffer for it, and copy the data to the urb */
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	buf = usb_alloc_coherent(dev->udev, writesize, GFP_KERNEL,
+				 &urb->transfer_dma);
+	if (!buf) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	if (copy_from_user(buf, user_buffer, writesize)) {
+		retval = -EFAULT;
+		goto error;
+	}
+
+	/* this lock makes sure we don't submit URBs to gone devices */
+	mutex_lock(&dev->io_mutex);
+	if (dev->disconnected) {		/* disconnect() was called */
+		mutex_unlock(&dev->io_mutex);
+		retval = -ENODEV;
+		goto error;
+	}
+
+	/* initialize the urb properly */
+	usb_fill_bulk_urb(urb, dev->udev,
+			  usb_sndbulkpipe(dev->udev, dev->bulk_out_endpointAddr),
+			  buf, writesize, skel_write_bulk_callback, dev);
+	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	usb_anchor_urb(urb, &dev->submitted);
+
+	/* send the data out the bulk port */
+	retval = usb_submit_urb(urb, GFP_KERNEL);
+	mutex_unlock(&dev->io_mutex);
+	if (retval) {
+		dev_err(&dev->interface->dev,
+			"%s - failed submitting write urb, error %d\n",
+			__func__, retval);
+		goto error_unanchor;
+	}
+
+	/*
+	 * release our reference to this urb, the USB core will eventually free
+	 * it entirely
+	 */
+	usb_free_urb(urb);
+
+
+	return writesize;
+
+error_unanchor:
+	usb_unanchor_urb(urb);
+error:
+	if (urb) {
+		usb_free_coherent(dev->udev, writesize, buf, urb->transfer_dma);
+		usb_free_urb(urb);
+	}
+	up(&dev->limit_sem);
+
+exit:
+	return retval;
+}
+
+static const struct file_operations skel_fops = {
+	.owner =	THIS_MODULE,
+	.read =		skel_read,
+	.write =	skel_write,
+	.open =		skel_open,
+	.release =	skel_release,
+	.flush =	skel_flush,
+	.llseek =	noop_llseek,
+};
+
+/*
+ * usb class driver info in order to get a minor number from the usb core,
+ * and to have the device registered with the driver core
+ */
+static struct usb_class_driver skel_class = {
+	.name =		"skel%d",
+	.fops =		&skel_fops,
+	.minor_base =	USB_SKEL_MINOR_BASE,
+};
+
+static int skel_probe(struct usb_interface *interface,
+		      const struct usb_device_id *id)
+{
+	struct usb_skel *dev;
+	struct usb_endpoint_descriptor *bulk_in, *bulk_out;
+	int retval;
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	kref_init(&dev->kref);
+	sema_init(&dev->limit_sem, WRITES_IN_FLIGHT);
+	mutex_init(&dev->io_mutex);
+	spin_lock_init(&dev->err_lock);
+	init_usb_anchor(&dev->submitted);
+	init_waitqueue_head(&dev->bulk_in_wait);
+
+	dev->udev = usb_get_dev(interface_to_usbdev(interface));
+	dev->interface = usb_get_intf(interface);
+
+	/* set up the endpoint information */
+	/* use only the first bulk-in and bulk-out endpoints */
+	retval = usb_find_common_endpoints(interface->cur_altsetting,
+			&bulk_in, &bulk_out, NULL, NULL);
+	if (retval) {
+		dev_err(&interface->dev,
+			"Could not find both bulk-in and bulk-out endpoints\n");
+		goto error;
+	}
+
+	dev->bulk_in_size = usb_endpoint_maxp(bulk_in);
+	dev->bulk_in_endpointAddr = bulk_in->bEndpointAddress;
+	dev->bulk_in_buffer = kmalloc(dev->bulk_in_size, GFP_KERNEL);
+	if (!dev->bulk_in_buffer) {
+		retval = -ENOMEM;
+		goto error;
+	}
+	dev->bulk_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->bulk_in_urb) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	dev->bulk_out_endpointAddr = bulk_out->bEndpointAddress;
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, dev);
+
+	/* we can register the device now, as it is ready */
+	retval = usb_register_dev(interface, &skel_class);
+	if (retval) {
+		/* something prevented us from registering this driver */
+		dev_err(&interface->dev,
+			"Not able to get a minor for this device.\n");
+		usb_set_intfdata(interface, NULL);
+		goto error;
+	}
+
+	/* let the user know what node this device is now attached to */
+	dev_info(&interface->dev,
+		 "USB Skeleton device now attached to USBSkel-%d",
+		 interface->minor);
+	return 0;
+
+error:
+	/* this frees allocated memory */
+	kref_put(&dev->kref, skel_delete);
+
+	return retval;
+}
+
+static void skel_disconnect(struct usb_interface *interface)
+{
+	struct usb_skel *dev;
+	int minor = interface->minor;
+
+	dev = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
+
+	/* give back our minor */
+	usb_deregister_dev(interface, &skel_class);
+
+	/* prevent more I/O from starting */
+	mutex_lock(&dev->io_mutex);
+	dev->disconnected = 1;
+	mutex_unlock(&dev->io_mutex);
+
+	usb_kill_urb(dev->bulk_in_urb);
+	usb_kill_anchored_urbs(&dev->submitted);
+
+	/* decrement our usage count */
+	kref_put(&dev->kref, skel_delete);
+
+	dev_info(&interface->dev, "USB Skeleton #%d now disconnected", minor);
+}
+
+static void skel_draw_down(struct usb_skel *dev)
+{
+	int time;
+
+	time = usb_wait_anchor_empty_timeout(&dev->submitted, 1000);
+	if (!time)
+		usb_kill_anchored_urbs(&dev->submitted);
+	usb_kill_urb(dev->bulk_in_urb);
+}
+
+static int skel_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usb_skel *dev = usb_get_intfdata(intf);
+
+	if (!dev)
+		return 0;
+	skel_draw_down(dev);
+	return 0;
+}
+
+static int skel_resume(struct usb_interface *intf)
+{
+	return 0;
+}
+
+static int skel_pre_reset(struct usb_interface *intf)
+{
+	struct usb_skel *dev = usb_get_intfdata(intf);
+
+	mutex_lock(&dev->io_mutex);
+	skel_draw_down(dev);
+
+	return 0;
+}
+
+static int skel_post_reset(struct usb_interface *intf)
+{
+	struct usb_skel *dev = usb_get_intfdata(intf);
+
+	/* we are sure no URBs are active - no locking needed */
+	dev->errors = -EPIPE;
+	mutex_unlock(&dev->io_mutex);
+
+	return 0;
+}
+
+static struct usb_driver skel_driver = {
+	.name =		"skeleton",
+	.probe =	skel_probe,
+	.disconnect =	skel_disconnect,
+	.suspend =	skel_suspend,
+	.resume =	skel_resume,
+	.pre_reset =	skel_pre_reset,
+	.post_reset =	skel_post_reset,
+	.id_table =	skel_table,
+	.supports_autosuspend = 1,
+};
+
+module_usb_driver(skel_driver);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/usbip/Kconfig b/drivers/usb/usbip/Kconfig
new file mode 100644
index 000000000..b9f94e2e2
--- /dev/null
+++ b/drivers/usb/usbip/Kconfig
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config USBIP_CORE
+	tristate "USB/IP support"
+	depends on NET
+	select USB_COMMON
+	select SGL_ALLOC
+	help
+	  This enables pushing USB packets over IP to allow remote
+	  machines direct access to USB devices. It provides the
+	  USB/IP core that is required by both drivers.
+
+	  For more details, and to get the userspace utility
+	  programs, please see <http://usbip.sourceforge.net/>.
+
+	  To compile this as a module, choose M here: the module will
+	  be called usbip-core.
+
+	  If unsure, say N.
+
+config USBIP_VHCI_HCD
+	tristate "VHCI hcd"
+	depends on USBIP_CORE && USB
+	help
+	  This enables the USB/IP virtual host controller driver,
+	  which is run on the remote machine.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vhci-hcd.
+
+config USBIP_VHCI_HC_PORTS
+	int "Number of ports per USB/IP virtual host controller"
+	range 1 15
+	default 8
+	depends on USBIP_VHCI_HCD
+	help
+	  To increase number of ports available for USB/IP virtual
+	  host controller driver, this defines number of ports per
+	  USB/IP virtual host controller.
+
+config USBIP_VHCI_NR_HCS
+	int "Number of USB/IP virtual host controllers"
+	range 1 128
+	default 1
+	depends on USBIP_VHCI_HCD
+	help
+	  To increase number of ports available for USB/IP virtual
+	  host controller driver, this defines number of USB/IP
+	  virtual host controllers as if adding physical host
+	  controllers.
+
+config USBIP_HOST
+	tristate "Host driver"
+	depends on USBIP_CORE && USB
+	help
+	  This enables the USB/IP host driver, which is run on the
+	  machine that is sharing the USB devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbip-host.
+
+config USBIP_VUDC
+	tristate "VUDC driver"
+	depends on USBIP_CORE && USB_GADGET
+	help
+	  This enables the USB/IP virtual USB device controller
+	  driver, which is run on the host machine, allowing the
+	  machine itself to act as a device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbip-vudc.
+
+config USBIP_DEBUG
+	bool "Debug messages for USB/IP"
+	depends on USBIP_CORE
+	help
+	  This enables the debug messages from the USB/IP drivers.
diff --git a/drivers/usb/usbip/Makefile b/drivers/usb/usbip/Makefile
new file mode 100644
index 000000000..f4c8f3840
--- /dev/null
+++ b/drivers/usb/usbip/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+ccflags-$(CONFIG_USBIP_DEBUG) := -DDEBUG
+
+obj-$(CONFIG_USBIP_CORE) += usbip-core.o
+usbip-core-y := usbip_common.o usbip_event.o
+
+obj-$(CONFIG_USBIP_VHCI_HCD) += vhci-hcd.o
+vhci-hcd-y := vhci_sysfs.o vhci_tx.o vhci_rx.o vhci_hcd.o
+
+obj-$(CONFIG_USBIP_HOST) += usbip-host.o
+usbip-host-y := stub_dev.o stub_main.o stub_rx.o stub_tx.o
+
+obj-$(CONFIG_USBIP_VUDC) += usbip-vudc.o
+usbip-vudc-y := vudc_dev.o vudc_sysfs.o vudc_tx.o vudc_rx.o vudc_transfer.o vudc_main.o
diff --git a/drivers/usb/usbip/stub.h b/drivers/usb/usbip/stub.h
new file mode 100644
index 000000000..d11270560
--- /dev/null
+++ b/drivers/usb/usbip/stub.h
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ */
+
+#ifndef __USBIP_STUB_H
+#define __USBIP_STUB_H
+
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/usb.h>
+#include <linux/wait.h>
+
+#define STUB_BUSID_OTHER 0
+#define STUB_BUSID_REMOV 1
+#define STUB_BUSID_ADDED 2
+#define STUB_BUSID_ALLOC 3
+
+struct stub_device {
+	struct usb_device *udev;
+
+	struct usbip_device ud;
+	__u32 devid;
+
+	/*
+	 * stub_priv preserves private data of each urb.
+	 * It is allocated as stub_priv_cache and assigned to urb->context.
+	 *
+	 * stub_priv is always linked to any one of 3 lists;
+	 *	priv_init: linked to this until the comletion of a urb.
+	 *	priv_tx  : linked to this after the completion of a urb.
+	 *	priv_free: linked to this after the sending of the result.
+	 *
+	 * Any of these list operations should be locked by priv_lock.
+	 */
+	spinlock_t priv_lock;
+	struct list_head priv_init;
+	struct list_head priv_tx;
+	struct list_head priv_free;
+
+	/* see comments for unlinking in stub_rx.c */
+	struct list_head unlink_tx;
+	struct list_head unlink_free;
+
+	wait_queue_head_t tx_waitq;
+};
+
+/* private data into urb->priv */
+struct stub_priv {
+	unsigned long seqnum;
+	struct list_head list;
+	struct stub_device *sdev;
+	struct urb **urbs;
+	struct scatterlist *sgl;
+	int num_urbs;
+	int completed_urbs;
+	int urb_status;
+
+	int unlinking;
+};
+
+struct stub_unlink {
+	unsigned long seqnum;
+	struct list_head list;
+	__u32 status;
+};
+
+/* same as SYSFS_BUS_ID_SIZE */
+#define BUSID_SIZE 32
+
+struct bus_id_priv {
+	char name[BUSID_SIZE];
+	char status;
+	int interf_count;
+	struct stub_device *sdev;
+	struct usb_device *udev;
+	char shutdown_busid;
+	spinlock_t busid_lock;
+};
+
+/* stub_priv is allocated from stub_priv_cache */
+extern struct kmem_cache *stub_priv_cache;
+
+/* stub_dev.c */
+extern struct usb_device_driver stub_driver;
+
+/* stub_main.c */
+struct bus_id_priv *get_busid_priv(const char *busid);
+void put_busid_priv(struct bus_id_priv *bid);
+int del_match_busid(char *busid);
+void stub_free_priv_and_urb(struct stub_priv *priv);
+void stub_device_cleanup_urbs(struct stub_device *sdev);
+
+/* stub_rx.c */
+int stub_rx_loop(void *data);
+
+/* stub_tx.c */
+void stub_enqueue_ret_unlink(struct stub_device *sdev, __u32 seqnum,
+			     __u32 status);
+void stub_complete(struct urb *urb);
+int stub_tx_loop(void *data);
+
+#endif /* __USBIP_STUB_H */
diff --git a/drivers/usb/usbip/stub_dev.c b/drivers/usb/usbip/stub_dev.c
new file mode 100644
index 000000000..4104eea03
--- /dev/null
+++ b/drivers/usb/usbip/stub_dev.c
@@ -0,0 +1,535 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ */
+
+#include <linux/device.h>
+#include <linux/file.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+
+#include "usbip_common.h"
+#include "stub.h"
+
+/*
+ * usbip_status shows the status of usbip-host as long as this driver is bound
+ * to the target device.
+ */
+static ssize_t usbip_status_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct stub_device *sdev = dev_get_drvdata(dev);
+	int status;
+
+	if (!sdev) {
+		dev_err(dev, "sdev is null\n");
+		return -ENODEV;
+	}
+
+	spin_lock_irq(&sdev->ud.lock);
+	status = sdev->ud.status;
+	spin_unlock_irq(&sdev->ud.lock);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", status);
+}
+static DEVICE_ATTR_RO(usbip_status);
+
+/*
+ * usbip_sockfd gets a socket descriptor of an established TCP connection that
+ * is used to transfer usbip requests by kernel threads. -1 is a magic number
+ * by which usbip connection is finished.
+ */
+static ssize_t usbip_sockfd_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct stub_device *sdev = dev_get_drvdata(dev);
+	int sockfd = 0;
+	struct socket *socket;
+	int rv;
+	struct task_struct *tcp_rx = NULL;
+	struct task_struct *tcp_tx = NULL;
+
+	if (!sdev) {
+		dev_err(dev, "sdev is null\n");
+		return -ENODEV;
+	}
+
+	rv = sscanf(buf, "%d", &sockfd);
+	if (rv != 1)
+		return -EINVAL;
+
+	if (sockfd != -1) {
+		int err;
+
+		dev_info(dev, "stub up\n");
+
+		mutex_lock(&sdev->ud.sysfs_lock);
+		spin_lock_irq(&sdev->ud.lock);
+
+		if (sdev->ud.status != SDEV_ST_AVAILABLE) {
+			dev_err(dev, "not ready\n");
+			goto err;
+		}
+
+		socket = sockfd_lookup(sockfd, &err);
+		if (!socket) {
+			dev_err(dev, "failed to lookup sock");
+			goto err;
+		}
+
+		if (socket->type != SOCK_STREAM) {
+			dev_err(dev, "Expecting SOCK_STREAM - found %d",
+				socket->type);
+			goto sock_err;
+		}
+
+		/* unlock and create threads and get tasks */
+		spin_unlock_irq(&sdev->ud.lock);
+		tcp_rx = kthread_create(stub_rx_loop, &sdev->ud, "stub_rx");
+		if (IS_ERR(tcp_rx)) {
+			sockfd_put(socket);
+			goto unlock_mutex;
+		}
+		tcp_tx = kthread_create(stub_tx_loop, &sdev->ud, "stub_tx");
+		if (IS_ERR(tcp_tx)) {
+			kthread_stop(tcp_rx);
+			sockfd_put(socket);
+			goto unlock_mutex;
+		}
+
+		/* get task structs now */
+		get_task_struct(tcp_rx);
+		get_task_struct(tcp_tx);
+
+		/* lock and update sdev->ud state */
+		spin_lock_irq(&sdev->ud.lock);
+		sdev->ud.tcp_socket = socket;
+		sdev->ud.sockfd = sockfd;
+		sdev->ud.tcp_rx = tcp_rx;
+		sdev->ud.tcp_tx = tcp_tx;
+		sdev->ud.status = SDEV_ST_USED;
+		spin_unlock_irq(&sdev->ud.lock);
+
+		wake_up_process(sdev->ud.tcp_rx);
+		wake_up_process(sdev->ud.tcp_tx);
+
+		mutex_unlock(&sdev->ud.sysfs_lock);
+
+	} else {
+		dev_info(dev, "stub down\n");
+
+		spin_lock_irq(&sdev->ud.lock);
+		if (sdev->ud.status != SDEV_ST_USED)
+			goto err;
+
+		spin_unlock_irq(&sdev->ud.lock);
+
+		usbip_event_add(&sdev->ud, SDEV_EVENT_DOWN);
+		mutex_unlock(&sdev->ud.sysfs_lock);
+	}
+
+	return count;
+
+sock_err:
+	sockfd_put(socket);
+err:
+	spin_unlock_irq(&sdev->ud.lock);
+unlock_mutex:
+	mutex_unlock(&sdev->ud.sysfs_lock);
+	return -EINVAL;
+}
+static DEVICE_ATTR_WO(usbip_sockfd);
+
+static struct attribute *usbip_attrs[] = {
+	&dev_attr_usbip_status.attr,
+	&dev_attr_usbip_sockfd.attr,
+	&dev_attr_usbip_debug.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(usbip);
+
+static void stub_shutdown_connection(struct usbip_device *ud)
+{
+	struct stub_device *sdev = container_of(ud, struct stub_device, ud);
+
+	/*
+	 * When removing an exported device, kernel panic sometimes occurred
+	 * and then EIP was sk_wait_data of stub_rx thread. Is this because
+	 * sk_wait_data returned though stub_rx thread was already finished by
+	 * step 1?
+	 */
+	if (ud->tcp_socket) {
+		dev_dbg(&sdev->udev->dev, "shutdown sockfd %d\n", ud->sockfd);
+		kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR);
+	}
+
+	/* 1. stop threads */
+	if (ud->tcp_rx) {
+		kthread_stop_put(ud->tcp_rx);
+		ud->tcp_rx = NULL;
+	}
+	if (ud->tcp_tx) {
+		kthread_stop_put(ud->tcp_tx);
+		ud->tcp_tx = NULL;
+	}
+
+	/*
+	 * 2. close the socket
+	 *
+	 * tcp_socket is freed after threads are killed so that usbip_xmit does
+	 * not touch NULL socket.
+	 */
+	if (ud->tcp_socket) {
+		sockfd_put(ud->tcp_socket);
+		ud->tcp_socket = NULL;
+		ud->sockfd = -1;
+	}
+
+	/* 3. free used data */
+	stub_device_cleanup_urbs(sdev);
+
+	/* 4. free stub_unlink */
+	{
+		unsigned long flags;
+		struct stub_unlink *unlink, *tmp;
+
+		spin_lock_irqsave(&sdev->priv_lock, flags);
+		list_for_each_entry_safe(unlink, tmp, &sdev->unlink_tx, list) {
+			list_del(&unlink->list);
+			kfree(unlink);
+		}
+		list_for_each_entry_safe(unlink, tmp, &sdev->unlink_free,
+					 list) {
+			list_del(&unlink->list);
+			kfree(unlink);
+		}
+		spin_unlock_irqrestore(&sdev->priv_lock, flags);
+	}
+}
+
+static void stub_device_reset(struct usbip_device *ud)
+{
+	struct stub_device *sdev = container_of(ud, struct stub_device, ud);
+	struct usb_device *udev = sdev->udev;
+	int ret;
+
+	dev_dbg(&udev->dev, "device reset");
+
+	ret = usb_lock_device_for_reset(udev, NULL);
+	if (ret < 0) {
+		dev_err(&udev->dev, "lock for reset\n");
+		spin_lock_irq(&ud->lock);
+		ud->status = SDEV_ST_ERROR;
+		spin_unlock_irq(&ud->lock);
+		return;
+	}
+
+	/* try to reset the device */
+	ret = usb_reset_device(udev);
+	usb_unlock_device(udev);
+
+	spin_lock_irq(&ud->lock);
+	if (ret) {
+		dev_err(&udev->dev, "device reset\n");
+		ud->status = SDEV_ST_ERROR;
+	} else {
+		dev_info(&udev->dev, "device reset\n");
+		ud->status = SDEV_ST_AVAILABLE;
+	}
+	spin_unlock_irq(&ud->lock);
+}
+
+static void stub_device_unusable(struct usbip_device *ud)
+{
+	spin_lock_irq(&ud->lock);
+	ud->status = SDEV_ST_ERROR;
+	spin_unlock_irq(&ud->lock);
+}
+
+/**
+ * stub_device_alloc - allocate a new stub_device struct
+ * @udev: usb_device of a new device
+ *
+ * Allocates and initializes a new stub_device struct.
+ */
+static struct stub_device *stub_device_alloc(struct usb_device *udev)
+{
+	struct stub_device *sdev;
+	int busnum = udev->bus->busnum;
+	int devnum = udev->devnum;
+
+	dev_dbg(&udev->dev, "allocating stub device");
+
+	/* yes, it's a new device */
+	sdev = kzalloc(sizeof(struct stub_device), GFP_KERNEL);
+	if (!sdev)
+		return NULL;
+
+	sdev->udev = usb_get_dev(udev);
+
+	/*
+	 * devid is defined with devnum when this driver is first allocated.
+	 * devnum may change later if a device is reset. However, devid never
+	 * changes during a usbip connection.
+	 */
+	sdev->devid		= (busnum << 16) | devnum;
+	sdev->ud.side		= USBIP_STUB;
+	sdev->ud.status		= SDEV_ST_AVAILABLE;
+	spin_lock_init(&sdev->ud.lock);
+	mutex_init(&sdev->ud.sysfs_lock);
+	sdev->ud.tcp_socket	= NULL;
+	sdev->ud.sockfd		= -1;
+
+	INIT_LIST_HEAD(&sdev->priv_init);
+	INIT_LIST_HEAD(&sdev->priv_tx);
+	INIT_LIST_HEAD(&sdev->priv_free);
+	INIT_LIST_HEAD(&sdev->unlink_free);
+	INIT_LIST_HEAD(&sdev->unlink_tx);
+	spin_lock_init(&sdev->priv_lock);
+
+	init_waitqueue_head(&sdev->tx_waitq);
+
+	sdev->ud.eh_ops.shutdown = stub_shutdown_connection;
+	sdev->ud.eh_ops.reset    = stub_device_reset;
+	sdev->ud.eh_ops.unusable = stub_device_unusable;
+
+	usbip_start_eh(&sdev->ud);
+
+	dev_dbg(&udev->dev, "register new device\n");
+
+	return sdev;
+}
+
+static void stub_device_free(struct stub_device *sdev)
+{
+	kfree(sdev);
+}
+
+static int stub_probe(struct usb_device *udev)
+{
+	struct stub_device *sdev = NULL;
+	const char *udev_busid = dev_name(&udev->dev);
+	struct bus_id_priv *busid_priv;
+	int rc = 0;
+	char save_status;
+
+	dev_dbg(&udev->dev, "Enter probe\n");
+
+	/* Not sure if this is our device. Allocate here to avoid
+	 * calling alloc while holding busid_table lock.
+	 */
+	sdev = stub_device_alloc(udev);
+	if (!sdev)
+		return -ENOMEM;
+
+	/* check we should claim or not by busid_table */
+	busid_priv = get_busid_priv(udev_busid);
+	if (!busid_priv || (busid_priv->status == STUB_BUSID_REMOV) ||
+	    (busid_priv->status == STUB_BUSID_OTHER)) {
+		dev_info(&udev->dev,
+			"%s is not in match_busid table... skip!\n",
+			udev_busid);
+
+		/*
+		 * Return value should be ENODEV or ENOXIO to continue trying
+		 * other matched drivers by the driver core.
+		 * See driver_probe_device() in driver/base/dd.c
+		 */
+		rc = -ENODEV;
+		if (!busid_priv)
+			goto sdev_free;
+
+		goto call_put_busid_priv;
+	}
+
+	if (udev->descriptor.bDeviceClass == USB_CLASS_HUB) {
+		dev_dbg(&udev->dev, "%s is a usb hub device... skip!\n",
+			 udev_busid);
+		rc = -ENODEV;
+		goto call_put_busid_priv;
+	}
+
+	if (!strcmp(udev->bus->bus_name, "vhci_hcd")) {
+		dev_dbg(&udev->dev,
+			"%s is attached on vhci_hcd... skip!\n",
+			udev_busid);
+
+		rc = -ENODEV;
+		goto call_put_busid_priv;
+	}
+
+
+	dev_info(&udev->dev,
+		"usbip-host: register new device (bus %u dev %u)\n",
+		udev->bus->busnum, udev->devnum);
+
+	busid_priv->shutdown_busid = 0;
+
+	/* set private data to usb_device */
+	dev_set_drvdata(&udev->dev, sdev);
+
+	busid_priv->sdev = sdev;
+	busid_priv->udev = udev;
+
+	save_status = busid_priv->status;
+	busid_priv->status = STUB_BUSID_ALLOC;
+
+	/* release the busid_lock */
+	put_busid_priv(busid_priv);
+
+	/*
+	 * Claim this hub port.
+	 * It doesn't matter what value we pass as owner
+	 * (struct dev_state) as long as it is unique.
+	 */
+	rc = usb_hub_claim_port(udev->parent, udev->portnum,
+			(struct usb_dev_state *) udev);
+	if (rc) {
+		dev_dbg(&udev->dev, "unable to claim port\n");
+		goto err_port;
+	}
+
+	return 0;
+
+err_port:
+	dev_set_drvdata(&udev->dev, NULL);
+
+	/* we already have busid_priv, just lock busid_lock */
+	spin_lock(&busid_priv->busid_lock);
+	busid_priv->sdev = NULL;
+	busid_priv->status = save_status;
+	spin_unlock(&busid_priv->busid_lock);
+	/* lock is released - go to free */
+	goto sdev_free;
+
+call_put_busid_priv:
+	/* release the busid_lock */
+	put_busid_priv(busid_priv);
+
+sdev_free:
+	usb_put_dev(udev);
+	stub_device_free(sdev);
+
+	return rc;
+}
+
+static void shutdown_busid(struct bus_id_priv *busid_priv)
+{
+	usbip_event_add(&busid_priv->sdev->ud, SDEV_EVENT_REMOVED);
+
+	/* wait for the stop of the event handler */
+	usbip_stop_eh(&busid_priv->sdev->ud);
+}
+
+/*
+ * called in usb_disconnect() or usb_deregister()
+ * but only if actconfig(active configuration) exists
+ */
+static void stub_disconnect(struct usb_device *udev)
+{
+	struct stub_device *sdev;
+	const char *udev_busid = dev_name(&udev->dev);
+	struct bus_id_priv *busid_priv;
+	int rc;
+
+	dev_dbg(&udev->dev, "Enter disconnect\n");
+
+	busid_priv = get_busid_priv(udev_busid);
+	if (!busid_priv) {
+		BUG();
+		return;
+	}
+
+	sdev = dev_get_drvdata(&udev->dev);
+
+	/* get stub_device */
+	if (!sdev) {
+		dev_err(&udev->dev, "could not get device");
+		/* release busid_lock */
+		put_busid_priv(busid_priv);
+		return;
+	}
+
+	dev_set_drvdata(&udev->dev, NULL);
+
+	/* release busid_lock before call to remove device files */
+	put_busid_priv(busid_priv);
+
+	/*
+	 * NOTE: rx/tx threads are invoked for each usb_device.
+	 */
+
+	/* release port */
+	rc = usb_hub_release_port(udev->parent, udev->portnum,
+				  (struct usb_dev_state *) udev);
+	/*
+	 * NOTE: If a HUB disconnect triggered disconnect of the down stream
+	 * device usb_hub_release_port will return -ENODEV so we can safely ignore
+	 * that error here.
+	 */
+	if (rc && (rc != -ENODEV)) {
+		dev_dbg(&udev->dev, "unable to release port (%i)\n", rc);
+		return;
+	}
+
+	/* If usb reset is called from event handler */
+	if (usbip_in_eh(current))
+		return;
+
+	/* we already have busid_priv, just lock busid_lock */
+	spin_lock(&busid_priv->busid_lock);
+	if (!busid_priv->shutdown_busid)
+		busid_priv->shutdown_busid = 1;
+	/* release busid_lock */
+	spin_unlock(&busid_priv->busid_lock);
+
+	/* shutdown the current connection */
+	shutdown_busid(busid_priv);
+
+	usb_put_dev(sdev->udev);
+
+	/* we already have busid_priv, just lock busid_lock */
+	spin_lock(&busid_priv->busid_lock);
+	/* free sdev */
+	busid_priv->sdev = NULL;
+	stub_device_free(sdev);
+
+	if (busid_priv->status == STUB_BUSID_ALLOC)
+		busid_priv->status = STUB_BUSID_ADDED;
+	/* release busid_lock */
+	spin_unlock(&busid_priv->busid_lock);
+	return;
+}
+
+#ifdef CONFIG_PM
+
+/* These functions need usb_port_suspend and usb_port_resume,
+ * which reside in drivers/usb/core/usb.h. Skip for now. */
+
+static int stub_suspend(struct usb_device *udev, pm_message_t message)
+{
+	dev_dbg(&udev->dev, "stub_suspend\n");
+
+	return 0;
+}
+
+static int stub_resume(struct usb_device *udev, pm_message_t message)
+{
+	dev_dbg(&udev->dev, "stub_resume\n");
+
+	return 0;
+}
+
+#endif	/* CONFIG_PM */
+
+struct usb_device_driver stub_driver = {
+	.name		= "usbip-host",
+	.probe		= stub_probe,
+	.disconnect	= stub_disconnect,
+#ifdef CONFIG_PM
+	.suspend	= stub_suspend,
+	.resume		= stub_resume,
+#endif
+	.supports_autosuspend	=	0,
+	.dev_groups	= usbip_groups,
+};
diff --git a/drivers/usb/usbip/stub_main.c b/drivers/usb/usbip/stub_main.c
new file mode 100644
index 000000000..e8c3131a8
--- /dev/null
+++ b/drivers/usb/usbip/stub_main.c
@@ -0,0 +1,430 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ */
+
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
+
+#include "usbip_common.h"
+#include "stub.h"
+
+#define DRIVER_AUTHOR "Takahiro Hirofuchi"
+#define DRIVER_DESC "USB/IP Host Driver"
+
+struct kmem_cache *stub_priv_cache;
+
+/*
+ * busid_tables defines matching busids that usbip can grab. A user can change
+ * dynamically what device is locally used and what device is exported to a
+ * remote host.
+ */
+#define MAX_BUSID 16
+static struct bus_id_priv busid_table[MAX_BUSID];
+static DEFINE_SPINLOCK(busid_table_lock);
+
+static void init_busid_table(void)
+{
+	int i;
+
+	/*
+	 * This also sets the bus_table[i].status to
+	 * STUB_BUSID_OTHER, which is 0.
+	 */
+	memset(busid_table, 0, sizeof(busid_table));
+
+	for (i = 0; i < MAX_BUSID; i++)
+		spin_lock_init(&busid_table[i].busid_lock);
+}
+
+/*
+ * Find the index of the busid by name.
+ * Must be called with busid_table_lock held.
+ */
+static int get_busid_idx(const char *busid)
+{
+	int i;
+	int idx = -1;
+
+	for (i = 0; i < MAX_BUSID; i++) {
+		spin_lock(&busid_table[i].busid_lock);
+		if (busid_table[i].name[0])
+			if (!strncmp(busid_table[i].name, busid, BUSID_SIZE)) {
+				idx = i;
+				spin_unlock(&busid_table[i].busid_lock);
+				break;
+			}
+		spin_unlock(&busid_table[i].busid_lock);
+	}
+	return idx;
+}
+
+/* Returns holding busid_lock. Should call put_busid_priv() to unlock */
+struct bus_id_priv *get_busid_priv(const char *busid)
+{
+	int idx;
+	struct bus_id_priv *bid = NULL;
+
+	spin_lock(&busid_table_lock);
+	idx = get_busid_idx(busid);
+	if (idx >= 0) {
+		bid = &(busid_table[idx]);
+		/* get busid_lock before returning */
+		spin_lock(&bid->busid_lock);
+	}
+	spin_unlock(&busid_table_lock);
+
+	return bid;
+}
+
+void put_busid_priv(struct bus_id_priv *bid)
+{
+	if (bid)
+		spin_unlock(&bid->busid_lock);
+}
+
+static int add_match_busid(char *busid)
+{
+	int i;
+	int ret = -1;
+
+	spin_lock(&busid_table_lock);
+	/* already registered? */
+	if (get_busid_idx(busid) >= 0) {
+		ret = 0;
+		goto out;
+	}
+
+	for (i = 0; i < MAX_BUSID; i++) {
+		spin_lock(&busid_table[i].busid_lock);
+		if (!busid_table[i].name[0]) {
+			strscpy(busid_table[i].name, busid, BUSID_SIZE);
+			if ((busid_table[i].status != STUB_BUSID_ALLOC) &&
+			    (busid_table[i].status != STUB_BUSID_REMOV))
+				busid_table[i].status = STUB_BUSID_ADDED;
+			ret = 0;
+			spin_unlock(&busid_table[i].busid_lock);
+			break;
+		}
+		spin_unlock(&busid_table[i].busid_lock);
+	}
+
+out:
+	spin_unlock(&busid_table_lock);
+
+	return ret;
+}
+
+int del_match_busid(char *busid)
+{
+	int idx;
+	int ret = -1;
+
+	spin_lock(&busid_table_lock);
+	idx = get_busid_idx(busid);
+	if (idx < 0)
+		goto out;
+
+	/* found */
+	ret = 0;
+
+	spin_lock(&busid_table[idx].busid_lock);
+
+	if (busid_table[idx].status == STUB_BUSID_OTHER)
+		memset(busid_table[idx].name, 0, BUSID_SIZE);
+
+	if ((busid_table[idx].status != STUB_BUSID_OTHER) &&
+	    (busid_table[idx].status != STUB_BUSID_ADDED))
+		busid_table[idx].status = STUB_BUSID_REMOV;
+
+	spin_unlock(&busid_table[idx].busid_lock);
+out:
+	spin_unlock(&busid_table_lock);
+
+	return ret;
+}
+
+static ssize_t match_busid_show(struct device_driver *drv, char *buf)
+{
+	int i;
+	char *out = buf;
+
+	spin_lock(&busid_table_lock);
+	for (i = 0; i < MAX_BUSID; i++) {
+		spin_lock(&busid_table[i].busid_lock);
+		if (busid_table[i].name[0])
+			out += sprintf(out, "%s ", busid_table[i].name);
+		spin_unlock(&busid_table[i].busid_lock);
+	}
+	spin_unlock(&busid_table_lock);
+	out += sprintf(out, "\n");
+
+	return out - buf;
+}
+
+static ssize_t match_busid_store(struct device_driver *dev, const char *buf,
+				 size_t count)
+{
+	int len;
+	char busid[BUSID_SIZE];
+
+	if (count < 5)
+		return -EINVAL;
+
+	/* busid needs to include \0 termination */
+	len = strlcpy(busid, buf + 4, BUSID_SIZE);
+	if (sizeof(busid) <= len)
+		return -EINVAL;
+
+	if (!strncmp(buf, "add ", 4)) {
+		if (add_match_busid(busid) < 0)
+			return -ENOMEM;
+
+		pr_debug("add busid %s\n", busid);
+		return count;
+	}
+
+	if (!strncmp(buf, "del ", 4)) {
+		if (del_match_busid(busid) < 0)
+			return -ENODEV;
+
+		pr_debug("del busid %s\n", busid);
+		return count;
+	}
+
+	return -EINVAL;
+}
+static DRIVER_ATTR_RW(match_busid);
+
+static int do_rebind(char *busid, struct bus_id_priv *busid_priv)
+{
+	int ret = 0;
+
+	/* device_attach() callers should hold parent lock for USB */
+	if (busid_priv->udev->dev.parent)
+		device_lock(busid_priv->udev->dev.parent);
+	ret = device_attach(&busid_priv->udev->dev);
+	if (busid_priv->udev->dev.parent)
+		device_unlock(busid_priv->udev->dev.parent);
+	if (ret < 0)
+		dev_err(&busid_priv->udev->dev, "rebind failed\n");
+	return ret;
+}
+
+static void stub_device_rebind(void)
+{
+#if IS_MODULE(CONFIG_USBIP_HOST)
+	struct bus_id_priv *busid_priv;
+	int i;
+
+	/* update status to STUB_BUSID_OTHER so probe ignores the device */
+	spin_lock(&busid_table_lock);
+	for (i = 0; i < MAX_BUSID; i++) {
+		if (busid_table[i].name[0] &&
+		    busid_table[i].shutdown_busid) {
+			busid_priv = &(busid_table[i]);
+			busid_priv->status = STUB_BUSID_OTHER;
+		}
+	}
+	spin_unlock(&busid_table_lock);
+
+	/* now run rebind - no need to hold locks. driver files are removed */
+	for (i = 0; i < MAX_BUSID; i++) {
+		if (busid_table[i].name[0] &&
+		    busid_table[i].shutdown_busid) {
+			busid_priv = &(busid_table[i]);
+			do_rebind(busid_table[i].name, busid_priv);
+		}
+	}
+#endif
+}
+
+static ssize_t rebind_store(struct device_driver *dev, const char *buf,
+				 size_t count)
+{
+	int ret;
+	int len;
+	struct bus_id_priv *bid;
+
+	/* buf length should be less that BUSID_SIZE */
+	len = strnlen(buf, BUSID_SIZE);
+
+	if (!(len < BUSID_SIZE))
+		return -EINVAL;
+
+	bid = get_busid_priv(buf);
+	if (!bid)
+		return -ENODEV;
+
+	/* mark the device for deletion so probe ignores it during rescan */
+	bid->status = STUB_BUSID_OTHER;
+	/* release the busid lock */
+	put_busid_priv(bid);
+
+	ret = do_rebind((char *) buf, bid);
+	if (ret < 0)
+		return ret;
+
+	/* delete device from busid_table */
+	del_match_busid((char *) buf);
+
+	return count;
+}
+
+static DRIVER_ATTR_WO(rebind);
+
+static struct stub_priv *stub_priv_pop_from_listhead(struct list_head *listhead)
+{
+	struct stub_priv *priv, *tmp;
+
+	list_for_each_entry_safe(priv, tmp, listhead, list) {
+		list_del_init(&priv->list);
+		return priv;
+	}
+
+	return NULL;
+}
+
+void stub_free_priv_and_urb(struct stub_priv *priv)
+{
+	struct urb *urb;
+	int i;
+
+	for (i = 0; i < priv->num_urbs; i++) {
+		urb = priv->urbs[i];
+
+		if (!urb)
+			return;
+
+		kfree(urb->setup_packet);
+		urb->setup_packet = NULL;
+
+
+		if (urb->transfer_buffer && !priv->sgl) {
+			kfree(urb->transfer_buffer);
+			urb->transfer_buffer = NULL;
+		}
+
+		if (urb->num_sgs) {
+			sgl_free(urb->sg);
+			urb->sg = NULL;
+			urb->num_sgs = 0;
+		}
+
+		usb_free_urb(urb);
+	}
+	if (!list_empty(&priv->list))
+		list_del(&priv->list);
+	if (priv->sgl)
+		sgl_free(priv->sgl);
+	kfree(priv->urbs);
+	kmem_cache_free(stub_priv_cache, priv);
+}
+
+static struct stub_priv *stub_priv_pop(struct stub_device *sdev)
+{
+	unsigned long flags;
+	struct stub_priv *priv;
+
+	spin_lock_irqsave(&sdev->priv_lock, flags);
+
+	priv = stub_priv_pop_from_listhead(&sdev->priv_init);
+	if (priv)
+		goto done;
+
+	priv = stub_priv_pop_from_listhead(&sdev->priv_tx);
+	if (priv)
+		goto done;
+
+	priv = stub_priv_pop_from_listhead(&sdev->priv_free);
+
+done:
+	spin_unlock_irqrestore(&sdev->priv_lock, flags);
+
+	return priv;
+}
+
+void stub_device_cleanup_urbs(struct stub_device *sdev)
+{
+	struct stub_priv *priv;
+	int i;
+
+	dev_dbg(&sdev->udev->dev, "Stub device cleaning up urbs\n");
+
+	while ((priv = stub_priv_pop(sdev))) {
+		for (i = 0; i < priv->num_urbs; i++)
+			usb_kill_urb(priv->urbs[i]);
+
+		stub_free_priv_and_urb(priv);
+	}
+}
+
+static int __init usbip_host_init(void)
+{
+	int ret;
+
+	init_busid_table();
+
+	stub_priv_cache = KMEM_CACHE(stub_priv, SLAB_HWCACHE_ALIGN);
+	if (!stub_priv_cache) {
+		pr_err("kmem_cache_create failed\n");
+		return -ENOMEM;
+	}
+
+	ret = usb_register_device_driver(&stub_driver, THIS_MODULE);
+	if (ret) {
+		pr_err("usb_register failed %d\n", ret);
+		goto err_usb_register;
+	}
+
+	ret = driver_create_file(&stub_driver.drvwrap.driver,
+				 &driver_attr_match_busid);
+	if (ret) {
+		pr_err("driver_create_file failed\n");
+		goto err_create_file;
+	}
+
+	ret = driver_create_file(&stub_driver.drvwrap.driver,
+				 &driver_attr_rebind);
+	if (ret) {
+		pr_err("driver_create_file failed\n");
+		goto err_create_file;
+	}
+
+	return ret;
+
+err_create_file:
+	usb_deregister_device_driver(&stub_driver);
+err_usb_register:
+	kmem_cache_destroy(stub_priv_cache);
+	return ret;
+}
+
+static void __exit usbip_host_exit(void)
+{
+	driver_remove_file(&stub_driver.drvwrap.driver,
+			   &driver_attr_match_busid);
+
+	driver_remove_file(&stub_driver.drvwrap.driver,
+			   &driver_attr_rebind);
+
+	/*
+	 * deregister() calls stub_disconnect() for all devices. Device
+	 * specific data is cleared in stub_disconnect().
+	 */
+	usb_deregister_device_driver(&stub_driver);
+
+	/* initiate scan to attach devices */
+	stub_device_rebind();
+
+	kmem_cache_destroy(stub_priv_cache);
+}
+
+module_init(usbip_host_init);
+module_exit(usbip_host_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c
new file mode 100644
index 000000000..fc01b31bb
--- /dev/null
+++ b/drivers/usb/usbip/stub_rx.c
@@ -0,0 +1,688 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ */
+
+#include <asm/byteorder.h>
+#include <linux/kthread.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/scatterlist.h>
+
+#include "usbip_common.h"
+#include "stub.h"
+
+static int is_clear_halt_cmd(struct urb *urb)
+{
+	struct usb_ctrlrequest *req;
+
+	req = (struct usb_ctrlrequest *) urb->setup_packet;
+
+	return (req->bRequest == USB_REQ_CLEAR_FEATURE) &&
+	       (req->bRequestType == USB_RECIP_ENDPOINT) &&
+	       (req->wValue == USB_ENDPOINT_HALT);
+}
+
+static int is_set_interface_cmd(struct urb *urb)
+{
+	struct usb_ctrlrequest *req;
+
+	req = (struct usb_ctrlrequest *) urb->setup_packet;
+
+	return (req->bRequest == USB_REQ_SET_INTERFACE) &&
+		(req->bRequestType == USB_RECIP_INTERFACE);
+}
+
+static int is_set_configuration_cmd(struct urb *urb)
+{
+	struct usb_ctrlrequest *req;
+
+	req = (struct usb_ctrlrequest *) urb->setup_packet;
+
+	return (req->bRequest == USB_REQ_SET_CONFIGURATION) &&
+		(req->bRequestType == USB_RECIP_DEVICE);
+}
+
+static int is_reset_device_cmd(struct urb *urb)
+{
+	struct usb_ctrlrequest *req;
+	__u16 value;
+	__u16 index;
+
+	req = (struct usb_ctrlrequest *) urb->setup_packet;
+	value = le16_to_cpu(req->wValue);
+	index = le16_to_cpu(req->wIndex);
+
+	if ((req->bRequest == USB_REQ_SET_FEATURE) &&
+	    (req->bRequestType == USB_RT_PORT) &&
+	    (value == USB_PORT_FEAT_RESET)) {
+		usbip_dbg_stub_rx("reset_device_cmd, port %u\n", index);
+		return 1;
+	} else
+		return 0;
+}
+
+static int tweak_clear_halt_cmd(struct urb *urb)
+{
+	struct usb_ctrlrequest *req;
+	int target_endp;
+	int target_dir;
+	int target_pipe;
+	int ret;
+
+	req = (struct usb_ctrlrequest *) urb->setup_packet;
+
+	/*
+	 * The stalled endpoint is specified in the wIndex value. The endpoint
+	 * of the urb is the target of this clear_halt request (i.e., control
+	 * endpoint).
+	 */
+	target_endp = le16_to_cpu(req->wIndex) & 0x000f;
+
+	/* the stalled endpoint direction is IN or OUT?. USB_DIR_IN is 0x80.  */
+	target_dir = le16_to_cpu(req->wIndex) & 0x0080;
+
+	if (target_dir)
+		target_pipe = usb_rcvctrlpipe(urb->dev, target_endp);
+	else
+		target_pipe = usb_sndctrlpipe(urb->dev, target_endp);
+
+	ret = usb_clear_halt(urb->dev, target_pipe);
+	if (ret < 0)
+		dev_err(&urb->dev->dev,
+			"usb_clear_halt error: devnum %d endp %d ret %d\n",
+			urb->dev->devnum, target_endp, ret);
+	else
+		dev_info(&urb->dev->dev,
+			 "usb_clear_halt done: devnum %d endp %d\n",
+			 urb->dev->devnum, target_endp);
+
+	return ret;
+}
+
+static int tweak_set_interface_cmd(struct urb *urb)
+{
+	struct usb_ctrlrequest *req;
+	__u16 alternate;
+	__u16 interface;
+	int ret;
+
+	req = (struct usb_ctrlrequest *) urb->setup_packet;
+	alternate = le16_to_cpu(req->wValue);
+	interface = le16_to_cpu(req->wIndex);
+
+	usbip_dbg_stub_rx("set_interface: inf %u alt %u\n",
+			  interface, alternate);
+
+	ret = usb_set_interface(urb->dev, interface, alternate);
+	if (ret < 0)
+		dev_err(&urb->dev->dev,
+			"usb_set_interface error: inf %u alt %u ret %d\n",
+			interface, alternate, ret);
+	else
+		dev_info(&urb->dev->dev,
+			"usb_set_interface done: inf %u alt %u\n",
+			interface, alternate);
+
+	return ret;
+}
+
+static int tweak_set_configuration_cmd(struct urb *urb)
+{
+	struct stub_priv *priv = (struct stub_priv *) urb->context;
+	struct stub_device *sdev = priv->sdev;
+	struct usb_ctrlrequest *req;
+	__u16 config;
+	int err;
+
+	req = (struct usb_ctrlrequest *) urb->setup_packet;
+	config = le16_to_cpu(req->wValue);
+
+	usb_lock_device(sdev->udev);
+	err = usb_set_configuration(sdev->udev, config);
+	usb_unlock_device(sdev->udev);
+	if (err && err != -ENODEV)
+		dev_err(&sdev->udev->dev, "can't set config #%d, error %d\n",
+			config, err);
+	return 0;
+}
+
+static int tweak_reset_device_cmd(struct urb *urb)
+{
+	struct stub_priv *priv = (struct stub_priv *) urb->context;
+	struct stub_device *sdev = priv->sdev;
+
+	dev_info(&urb->dev->dev, "usb_queue_reset_device\n");
+
+	if (usb_lock_device_for_reset(sdev->udev, NULL) < 0) {
+		dev_err(&urb->dev->dev, "could not obtain lock to reset device\n");
+		return 0;
+	}
+	usb_reset_device(sdev->udev);
+	usb_unlock_device(sdev->udev);
+
+	return 0;
+}
+
+/*
+ * clear_halt, set_interface, and set_configuration require special tricks.
+ */
+static void tweak_special_requests(struct urb *urb)
+{
+	if (!urb || !urb->setup_packet)
+		return;
+
+	if (usb_pipetype(urb->pipe) != PIPE_CONTROL)
+		return;
+
+	if (is_clear_halt_cmd(urb))
+		/* tweak clear_halt */
+		 tweak_clear_halt_cmd(urb);
+
+	else if (is_set_interface_cmd(urb))
+		/* tweak set_interface */
+		tweak_set_interface_cmd(urb);
+
+	else if (is_set_configuration_cmd(urb))
+		/* tweak set_configuration */
+		tweak_set_configuration_cmd(urb);
+
+	else if (is_reset_device_cmd(urb))
+		tweak_reset_device_cmd(urb);
+	else
+		usbip_dbg_stub_rx("no need to tweak\n");
+}
+
+/*
+ * stub_recv_unlink() unlinks the URB by a call to usb_unlink_urb().
+ * By unlinking the urb asynchronously, stub_rx can continuously
+ * process coming urbs.  Even if the urb is unlinked, its completion
+ * handler will be called and stub_tx will send a return pdu.
+ *
+ * See also comments about unlinking strategy in vhci_hcd.c.
+ */
+static int stub_recv_cmd_unlink(struct stub_device *sdev,
+				struct usbip_header *pdu)
+{
+	int ret, i;
+	unsigned long flags;
+	struct stub_priv *priv;
+
+	spin_lock_irqsave(&sdev->priv_lock, flags);
+
+	list_for_each_entry(priv, &sdev->priv_init, list) {
+		if (priv->seqnum != pdu->u.cmd_unlink.seqnum)
+			continue;
+
+		/*
+		 * This matched urb is not completed yet (i.e., be in
+		 * flight in usb hcd hardware/driver). Now we are
+		 * cancelling it. The unlinking flag means that we are
+		 * now not going to return the normal result pdu of a
+		 * submission request, but going to return a result pdu
+		 * of the unlink request.
+		 */
+		priv->unlinking = 1;
+
+		/*
+		 * In the case that unlinking flag is on, prev->seqnum
+		 * is changed from the seqnum of the cancelling urb to
+		 * the seqnum of the unlink request. This will be used
+		 * to make the result pdu of the unlink request.
+		 */
+		priv->seqnum = pdu->base.seqnum;
+
+		spin_unlock_irqrestore(&sdev->priv_lock, flags);
+
+		/*
+		 * usb_unlink_urb() is now out of spinlocking to avoid
+		 * spinlock recursion since stub_complete() is
+		 * sometimes called in this context but not in the
+		 * interrupt context.  If stub_complete() is executed
+		 * before we call usb_unlink_urb(), usb_unlink_urb()
+		 * will return an error value. In this case, stub_tx
+		 * will return the result pdu of this unlink request
+		 * though submission is completed and actual unlinking
+		 * is not executed. OK?
+		 */
+		/* In the above case, urb->status is not -ECONNRESET,
+		 * so a driver in a client host will know the failure
+		 * of the unlink request ?
+		 */
+		for (i = priv->completed_urbs; i < priv->num_urbs; i++) {
+			ret = usb_unlink_urb(priv->urbs[i]);
+			if (ret != -EINPROGRESS)
+				dev_err(&priv->urbs[i]->dev->dev,
+					"failed to unlink %d/%d urb of seqnum %lu, ret %d\n",
+					i + 1, priv->num_urbs,
+					priv->seqnum, ret);
+		}
+		return 0;
+	}
+
+	usbip_dbg_stub_rx("seqnum %d is not pending\n",
+			  pdu->u.cmd_unlink.seqnum);
+
+	/*
+	 * The urb of the unlink target is not found in priv_init queue. It was
+	 * already completed and its results is/was going to be sent by a
+	 * CMD_RET pdu. In this case, usb_unlink_urb() is not needed. We only
+	 * return the completeness of this unlink request to vhci_hcd.
+	 */
+	stub_enqueue_ret_unlink(sdev, pdu->base.seqnum, 0);
+
+	spin_unlock_irqrestore(&sdev->priv_lock, flags);
+
+	return 0;
+}
+
+static int valid_request(struct stub_device *sdev, struct usbip_header *pdu)
+{
+	struct usbip_device *ud = &sdev->ud;
+	int valid = 0;
+
+	if (pdu->base.devid == sdev->devid) {
+		spin_lock_irq(&ud->lock);
+		if (ud->status == SDEV_ST_USED) {
+			/* A request is valid. */
+			valid = 1;
+		}
+		spin_unlock_irq(&ud->lock);
+	}
+
+	return valid;
+}
+
+static struct stub_priv *stub_priv_alloc(struct stub_device *sdev,
+					 struct usbip_header *pdu)
+{
+	struct stub_priv *priv;
+	struct usbip_device *ud = &sdev->ud;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdev->priv_lock, flags);
+
+	priv = kmem_cache_zalloc(stub_priv_cache, GFP_ATOMIC);
+	if (!priv) {
+		dev_err(&sdev->udev->dev, "alloc stub_priv\n");
+		spin_unlock_irqrestore(&sdev->priv_lock, flags);
+		usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
+		return NULL;
+	}
+
+	priv->seqnum = pdu->base.seqnum;
+	priv->sdev = sdev;
+
+	/*
+	 * After a stub_priv is linked to a list_head,
+	 * our error handler can free allocated data.
+	 */
+	list_add_tail(&priv->list, &sdev->priv_init);
+
+	spin_unlock_irqrestore(&sdev->priv_lock, flags);
+
+	return priv;
+}
+
+static int get_pipe(struct stub_device *sdev, struct usbip_header *pdu)
+{
+	struct usb_device *udev = sdev->udev;
+	struct usb_host_endpoint *ep;
+	struct usb_endpoint_descriptor *epd = NULL;
+	int epnum = pdu->base.ep;
+	int dir = pdu->base.direction;
+
+	if (epnum < 0 || epnum > 15)
+		goto err_ret;
+
+	if (dir == USBIP_DIR_IN)
+		ep = udev->ep_in[epnum & 0x7f];
+	else
+		ep = udev->ep_out[epnum & 0x7f];
+	if (!ep)
+		goto err_ret;
+
+	epd = &ep->desc;
+
+	if (usb_endpoint_xfer_control(epd)) {
+		if (dir == USBIP_DIR_OUT)
+			return usb_sndctrlpipe(udev, epnum);
+		else
+			return usb_rcvctrlpipe(udev, epnum);
+	}
+
+	if (usb_endpoint_xfer_bulk(epd)) {
+		if (dir == USBIP_DIR_OUT)
+			return usb_sndbulkpipe(udev, epnum);
+		else
+			return usb_rcvbulkpipe(udev, epnum);
+	}
+
+	if (usb_endpoint_xfer_int(epd)) {
+		if (dir == USBIP_DIR_OUT)
+			return usb_sndintpipe(udev, epnum);
+		else
+			return usb_rcvintpipe(udev, epnum);
+	}
+
+	if (usb_endpoint_xfer_isoc(epd)) {
+		/* validate number of packets */
+		if (pdu->u.cmd_submit.number_of_packets < 0 ||
+		    pdu->u.cmd_submit.number_of_packets >
+		    USBIP_MAX_ISO_PACKETS) {
+			dev_err(&sdev->udev->dev,
+				"CMD_SUBMIT: isoc invalid num packets %d\n",
+				pdu->u.cmd_submit.number_of_packets);
+			return -1;
+		}
+		if (dir == USBIP_DIR_OUT)
+			return usb_sndisocpipe(udev, epnum);
+		else
+			return usb_rcvisocpipe(udev, epnum);
+	}
+
+err_ret:
+	/* NOT REACHED */
+	dev_err(&sdev->udev->dev, "CMD_SUBMIT: invalid epnum %d\n", epnum);
+	return -1;
+}
+
+static void masking_bogus_flags(struct urb *urb)
+{
+	int				xfertype;
+	struct usb_device		*dev;
+	struct usb_host_endpoint	*ep;
+	int				is_out;
+	unsigned int	allowed;
+
+	if (!urb || urb->hcpriv || !urb->complete)
+		return;
+	dev = urb->dev;
+	if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED))
+		return;
+
+	ep = (usb_pipein(urb->pipe) ? dev->ep_in : dev->ep_out)
+		[usb_pipeendpoint(urb->pipe)];
+	if (!ep)
+		return;
+
+	xfertype = usb_endpoint_type(&ep->desc);
+	if (xfertype == USB_ENDPOINT_XFER_CONTROL) {
+		struct usb_ctrlrequest *setup =
+			(struct usb_ctrlrequest *) urb->setup_packet;
+
+		if (!setup)
+			return;
+		is_out = !(setup->bRequestType & USB_DIR_IN) ||
+			!setup->wLength;
+	} else {
+		is_out = usb_endpoint_dir_out(&ep->desc);
+	}
+
+	/* enforce simple/standard policy */
+	allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT |
+		   URB_DIR_MASK | URB_FREE_BUFFER);
+	switch (xfertype) {
+	case USB_ENDPOINT_XFER_BULK:
+		if (is_out)
+			allowed |= URB_ZERO_PACKET;
+		fallthrough;
+	default:			/* all non-iso endpoints */
+		if (!is_out)
+			allowed |= URB_SHORT_NOT_OK;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		allowed |= URB_ISO_ASAP;
+		break;
+	}
+	urb->transfer_flags &= allowed;
+}
+
+static int stub_recv_xbuff(struct usbip_device *ud, struct stub_priv *priv)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < priv->num_urbs; i++) {
+		ret = usbip_recv_xbuff(ud, priv->urbs[i]);
+		if (ret < 0)
+			break;
+	}
+
+	return ret;
+}
+
+static void stub_recv_cmd_submit(struct stub_device *sdev,
+				 struct usbip_header *pdu)
+{
+	struct stub_priv *priv;
+	struct usbip_device *ud = &sdev->ud;
+	struct usb_device *udev = sdev->udev;
+	struct scatterlist *sgl = NULL, *sg;
+	void *buffer = NULL;
+	unsigned long long buf_len;
+	int nents;
+	int num_urbs = 1;
+	int pipe = get_pipe(sdev, pdu);
+	int use_sg = pdu->u.cmd_submit.transfer_flags & USBIP_URB_DMA_MAP_SG;
+	int support_sg = 1;
+	int np = 0;
+	int ret, i;
+
+	if (pipe == -1)
+		return;
+
+	/*
+	 * Smatch reported the error case where use_sg is true and buf_len is 0.
+	 * In this case, It adds SDEV_EVENT_ERROR_MALLOC and stub_priv will be
+	 * released by stub event handler and connection will be shut down.
+	 */
+	priv = stub_priv_alloc(sdev, pdu);
+	if (!priv)
+		return;
+
+	buf_len = (unsigned long long)pdu->u.cmd_submit.transfer_buffer_length;
+
+	if (use_sg && !buf_len) {
+		dev_err(&udev->dev, "sg buffer with zero length\n");
+		goto err_malloc;
+	}
+
+	/* allocate urb transfer buffer, if needed */
+	if (buf_len) {
+		if (use_sg) {
+			sgl = sgl_alloc(buf_len, GFP_KERNEL, &nents);
+			if (!sgl)
+				goto err_malloc;
+
+			/* Check if the server's HCD supports SG */
+			if (!udev->bus->sg_tablesize) {
+				/*
+				 * If the server's HCD doesn't support SG, break
+				 * a single SG request into several URBs and map
+				 * each SG list entry to corresponding URB
+				 * buffer. The previously allocated SG list is
+				 * stored in priv->sgl (If the server's HCD
+				 * support SG, SG list is stored only in
+				 * urb->sg) and it is used as an indicator that
+				 * the server split single SG request into
+				 * several URBs. Later, priv->sgl is used by
+				 * stub_complete() and stub_send_ret_submit() to
+				 * reassemble the divied URBs.
+				 */
+				support_sg = 0;
+				num_urbs = nents;
+				priv->completed_urbs = 0;
+				pdu->u.cmd_submit.transfer_flags &=
+								~USBIP_URB_DMA_MAP_SG;
+			}
+		} else {
+			buffer = kzalloc(buf_len, GFP_KERNEL);
+			if (!buffer)
+				goto err_malloc;
+		}
+	}
+
+	/* allocate urb array */
+	priv->num_urbs = num_urbs;
+	priv->urbs = kmalloc_array(num_urbs, sizeof(*priv->urbs), GFP_KERNEL);
+	if (!priv->urbs)
+		goto err_urbs;
+
+	/* setup a urb */
+	if (support_sg) {
+		if (usb_pipeisoc(pipe))
+			np = pdu->u.cmd_submit.number_of_packets;
+
+		priv->urbs[0] = usb_alloc_urb(np, GFP_KERNEL);
+		if (!priv->urbs[0])
+			goto err_urb;
+
+		if (buf_len) {
+			if (use_sg) {
+				priv->urbs[0]->sg = sgl;
+				priv->urbs[0]->num_sgs = nents;
+				priv->urbs[0]->transfer_buffer = NULL;
+			} else {
+				priv->urbs[0]->transfer_buffer = buffer;
+			}
+		}
+
+		/* copy urb setup packet */
+		priv->urbs[0]->setup_packet = kmemdup(&pdu->u.cmd_submit.setup,
+					8, GFP_KERNEL);
+		if (!priv->urbs[0]->setup_packet) {
+			usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
+			return;
+		}
+
+		usbip_pack_pdu(pdu, priv->urbs[0], USBIP_CMD_SUBMIT, 0);
+	} else {
+		for_each_sg(sgl, sg, nents, i) {
+			priv->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
+			/* The URBs which is previously allocated will be freed
+			 * in stub_device_cleanup_urbs() if error occurs.
+			 */
+			if (!priv->urbs[i])
+				goto err_urb;
+
+			usbip_pack_pdu(pdu, priv->urbs[i], USBIP_CMD_SUBMIT, 0);
+			priv->urbs[i]->transfer_buffer = sg_virt(sg);
+			priv->urbs[i]->transfer_buffer_length = sg->length;
+		}
+		priv->sgl = sgl;
+	}
+
+	for (i = 0; i < num_urbs; i++) {
+		/* set other members from the base header of pdu */
+		priv->urbs[i]->context = (void *) priv;
+		priv->urbs[i]->dev = udev;
+		priv->urbs[i]->pipe = pipe;
+		priv->urbs[i]->complete = stub_complete;
+
+		/* no need to submit an intercepted request, but harmless? */
+		tweak_special_requests(priv->urbs[i]);
+
+		masking_bogus_flags(priv->urbs[i]);
+	}
+
+	if (stub_recv_xbuff(ud, priv) < 0)
+		return;
+
+	if (usbip_recv_iso(ud, priv->urbs[0]) < 0)
+		return;
+
+	/* urb is now ready to submit */
+	for (i = 0; i < priv->num_urbs; i++) {
+		ret = usb_submit_urb(priv->urbs[i], GFP_KERNEL);
+
+		if (ret == 0)
+			usbip_dbg_stub_rx("submit urb ok, seqnum %u\n",
+					pdu->base.seqnum);
+		else {
+			dev_err(&udev->dev, "submit_urb error, %d\n", ret);
+			usbip_dump_header(pdu);
+			usbip_dump_urb(priv->urbs[i]);
+
+			/*
+			 * Pessimistic.
+			 * This connection will be discarded.
+			 */
+			usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
+			break;
+		}
+	}
+
+	usbip_dbg_stub_rx("Leave\n");
+	return;
+
+err_urb:
+	kfree(priv->urbs);
+err_urbs:
+	kfree(buffer);
+	sgl_free(sgl);
+err_malloc:
+	usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
+}
+
+/* recv a pdu */
+static void stub_rx_pdu(struct usbip_device *ud)
+{
+	int ret;
+	struct usbip_header pdu;
+	struct stub_device *sdev = container_of(ud, struct stub_device, ud);
+	struct device *dev = &sdev->udev->dev;
+
+	usbip_dbg_stub_rx("Enter\n");
+
+	memset(&pdu, 0, sizeof(pdu));
+
+	/* receive a pdu header */
+	ret = usbip_recv(ud->tcp_socket, &pdu, sizeof(pdu));
+	if (ret != sizeof(pdu)) {
+		dev_err(dev, "recv a header, %d\n", ret);
+		usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
+		return;
+	}
+
+	usbip_header_correct_endian(&pdu, 0);
+
+	if (usbip_dbg_flag_stub_rx)
+		usbip_dump_header(&pdu);
+
+	if (!valid_request(sdev, &pdu)) {
+		dev_err(dev, "recv invalid request\n");
+		usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
+		return;
+	}
+
+	switch (pdu.base.command) {
+	case USBIP_CMD_UNLINK:
+		stub_recv_cmd_unlink(sdev, &pdu);
+		break;
+
+	case USBIP_CMD_SUBMIT:
+		stub_recv_cmd_submit(sdev, &pdu);
+		break;
+
+	default:
+		/* NOTREACHED */
+		dev_err(dev, "unknown pdu\n");
+		usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
+		break;
+	}
+}
+
+int stub_rx_loop(void *data)
+{
+	struct usbip_device *ud = data;
+
+	while (!kthread_should_stop()) {
+		if (usbip_event_happened(ud))
+			break;
+
+		stub_rx_pdu(ud);
+	}
+
+	return 0;
+}
diff --git a/drivers/usb/usbip/stub_tx.c b/drivers/usb/usbip/stub_tx.c
new file mode 100644
index 000000000..b1c2f6781
--- /dev/null
+++ b/drivers/usb/usbip/stub_tx.c
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ */
+
+#include <linux/kthread.h>
+#include <linux/socket.h>
+#include <linux/scatterlist.h>
+
+#include "usbip_common.h"
+#include "stub.h"
+
+/* be in spin_lock_irqsave(&sdev->priv_lock, flags) */
+void stub_enqueue_ret_unlink(struct stub_device *sdev, __u32 seqnum,
+			     __u32 status)
+{
+	struct stub_unlink *unlink;
+
+	unlink = kzalloc(sizeof(struct stub_unlink), GFP_ATOMIC);
+	if (!unlink) {
+		usbip_event_add(&sdev->ud, VDEV_EVENT_ERROR_MALLOC);
+		return;
+	}
+
+	unlink->seqnum = seqnum;
+	unlink->status = status;
+
+	list_add_tail(&unlink->list, &sdev->unlink_tx);
+}
+
+/**
+ * stub_complete - completion handler of a usbip urb
+ * @urb: pointer to the urb completed
+ *
+ * When a urb has completed, the USB core driver calls this function mostly in
+ * the interrupt context. To return the result of a urb, the completed urb is
+ * linked to the pending list of returning.
+ *
+ */
+void stub_complete(struct urb *urb)
+{
+	struct stub_priv *priv = (struct stub_priv *) urb->context;
+	struct stub_device *sdev = priv->sdev;
+	unsigned long flags;
+
+	usbip_dbg_stub_tx("complete! status %d\n", urb->status);
+
+	switch (urb->status) {
+	case 0:
+		/* OK */
+		break;
+	case -ENOENT:
+		dev_info(&urb->dev->dev,
+			 "stopped by a call to usb_kill_urb() because of cleaning up a virtual connection\n");
+		return;
+	case -ECONNRESET:
+		dev_info(&urb->dev->dev,
+			 "unlinked by a call to usb_unlink_urb()\n");
+		break;
+	case -EPIPE:
+		dev_info(&urb->dev->dev, "endpoint %d is stalled\n",
+			 usb_pipeendpoint(urb->pipe));
+		break;
+	case -ESHUTDOWN:
+		dev_info(&urb->dev->dev, "device removed?\n");
+		break;
+	default:
+		dev_info(&urb->dev->dev,
+			 "urb completion with non-zero status %d\n",
+			 urb->status);
+		break;
+	}
+
+	/*
+	 * If the server breaks single SG request into the several URBs, the
+	 * URBs must be reassembled before sending completed URB to the vhci.
+	 * Don't wake up the tx thread until all the URBs are completed.
+	 */
+	if (priv->sgl) {
+		priv->completed_urbs++;
+
+		/* Only save the first error status */
+		if (urb->status && !priv->urb_status)
+			priv->urb_status = urb->status;
+
+		if (priv->completed_urbs < priv->num_urbs)
+			return;
+	}
+
+	/* link a urb to the queue of tx. */
+	spin_lock_irqsave(&sdev->priv_lock, flags);
+	if (sdev->ud.tcp_socket == NULL) {
+		usbip_dbg_stub_tx("ignore urb for closed connection\n");
+		/* It will be freed in stub_device_cleanup_urbs(). */
+	} else if (priv->unlinking) {
+		stub_enqueue_ret_unlink(sdev, priv->seqnum, urb->status);
+		stub_free_priv_and_urb(priv);
+	} else {
+		list_move_tail(&priv->list, &sdev->priv_tx);
+	}
+	spin_unlock_irqrestore(&sdev->priv_lock, flags);
+
+	/* wake up tx_thread */
+	wake_up(&sdev->tx_waitq);
+}
+
+static inline void setup_base_pdu(struct usbip_header_basic *base,
+				  __u32 command, __u32 seqnum)
+{
+	base->command	= command;
+	base->seqnum	= seqnum;
+	base->devid	= 0;
+	base->ep	= 0;
+	base->direction = 0;
+}
+
+static void setup_ret_submit_pdu(struct usbip_header *rpdu, struct urb *urb)
+{
+	struct stub_priv *priv = (struct stub_priv *) urb->context;
+
+	setup_base_pdu(&rpdu->base, USBIP_RET_SUBMIT, priv->seqnum);
+	usbip_pack_pdu(rpdu, urb, USBIP_RET_SUBMIT, 1);
+}
+
+static void setup_ret_unlink_pdu(struct usbip_header *rpdu,
+				 struct stub_unlink *unlink)
+{
+	setup_base_pdu(&rpdu->base, USBIP_RET_UNLINK, unlink->seqnum);
+	rpdu->u.ret_unlink.status = unlink->status;
+}
+
+static struct stub_priv *dequeue_from_priv_tx(struct stub_device *sdev)
+{
+	unsigned long flags;
+	struct stub_priv *priv, *tmp;
+
+	spin_lock_irqsave(&sdev->priv_lock, flags);
+
+	list_for_each_entry_safe(priv, tmp, &sdev->priv_tx, list) {
+		list_move_tail(&priv->list, &sdev->priv_free);
+		spin_unlock_irqrestore(&sdev->priv_lock, flags);
+		return priv;
+	}
+
+	spin_unlock_irqrestore(&sdev->priv_lock, flags);
+
+	return NULL;
+}
+
+static int stub_send_ret_submit(struct stub_device *sdev)
+{
+	unsigned long flags;
+	struct stub_priv *priv, *tmp;
+
+	struct msghdr msg;
+	size_t txsize;
+
+	size_t total_size = 0;
+
+	while ((priv = dequeue_from_priv_tx(sdev)) != NULL) {
+		struct urb *urb = priv->urbs[0];
+		struct usbip_header pdu_header;
+		struct usbip_iso_packet_descriptor *iso_buffer = NULL;
+		struct kvec *iov = NULL;
+		struct scatterlist *sg;
+		u32 actual_length = 0;
+		int iovnum = 0;
+		int ret;
+		int i;
+
+		txsize = 0;
+		memset(&pdu_header, 0, sizeof(pdu_header));
+		memset(&msg, 0, sizeof(msg));
+
+		if (urb->actual_length > 0 && !urb->transfer_buffer &&
+		   !urb->num_sgs) {
+			dev_err(&sdev->udev->dev,
+				"urb: actual_length %d transfer_buffer null\n",
+				urb->actual_length);
+			return -1;
+		}
+
+		if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+			iovnum = 2 + urb->number_of_packets;
+		else if (usb_pipein(urb->pipe) && urb->actual_length > 0 &&
+			urb->num_sgs)
+			iovnum = 1 + urb->num_sgs;
+		else if (usb_pipein(urb->pipe) && priv->sgl)
+			iovnum = 1 + priv->num_urbs;
+		else
+			iovnum = 2;
+
+		iov = kcalloc(iovnum, sizeof(struct kvec), GFP_KERNEL);
+
+		if (!iov) {
+			usbip_event_add(&sdev->ud, SDEV_EVENT_ERROR_MALLOC);
+			return -1;
+		}
+
+		iovnum = 0;
+
+		/* 1. setup usbip_header */
+		setup_ret_submit_pdu(&pdu_header, urb);
+		usbip_dbg_stub_tx("setup txdata seqnum: %d\n",
+				  pdu_header.base.seqnum);
+
+		if (priv->sgl) {
+			for (i = 0; i < priv->num_urbs; i++)
+				actual_length += priv->urbs[i]->actual_length;
+
+			pdu_header.u.ret_submit.status = priv->urb_status;
+			pdu_header.u.ret_submit.actual_length = actual_length;
+		}
+
+		usbip_header_correct_endian(&pdu_header, 1);
+
+		iov[iovnum].iov_base = &pdu_header;
+		iov[iovnum].iov_len  = sizeof(pdu_header);
+		iovnum++;
+		txsize += sizeof(pdu_header);
+
+		/* 2. setup transfer buffer */
+		if (usb_pipein(urb->pipe) && priv->sgl) {
+			/* If the server split a single SG request into several
+			 * URBs because the server's HCD doesn't support SG,
+			 * reassemble the split URB buffers into a single
+			 * return command.
+			 */
+			for (i = 0; i < priv->num_urbs; i++) {
+				iov[iovnum].iov_base =
+					priv->urbs[i]->transfer_buffer;
+				iov[iovnum].iov_len =
+					priv->urbs[i]->actual_length;
+				iovnum++;
+			}
+			txsize += actual_length;
+		} else if (usb_pipein(urb->pipe) &&
+		    usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS &&
+		    urb->actual_length > 0) {
+			if (urb->num_sgs) {
+				unsigned int copy = urb->actual_length;
+				int size;
+
+				for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+					if (copy == 0)
+						break;
+
+					if (copy < sg->length)
+						size = copy;
+					else
+						size = sg->length;
+
+					iov[iovnum].iov_base = sg_virt(sg);
+					iov[iovnum].iov_len = size;
+
+					iovnum++;
+					copy -= size;
+				}
+			} else {
+				iov[iovnum].iov_base = urb->transfer_buffer;
+				iov[iovnum].iov_len  = urb->actual_length;
+				iovnum++;
+			}
+			txsize += urb->actual_length;
+		} else if (usb_pipein(urb->pipe) &&
+			   usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+			/*
+			 * For isochronous packets: actual length is the sum of
+			 * the actual length of the individual, packets, but as
+			 * the packet offsets are not changed there will be
+			 * padding between the packets. To optimally use the
+			 * bandwidth the padding is not transmitted.
+			 */
+
+			int i;
+
+			for (i = 0; i < urb->number_of_packets; i++) {
+				iov[iovnum].iov_base = urb->transfer_buffer +
+					urb->iso_frame_desc[i].offset;
+				iov[iovnum].iov_len =
+					urb->iso_frame_desc[i].actual_length;
+				iovnum++;
+				txsize += urb->iso_frame_desc[i].actual_length;
+			}
+
+			if (txsize != sizeof(pdu_header) + urb->actual_length) {
+				dev_err(&sdev->udev->dev,
+					"actual length of urb %d does not match iso packet sizes %zu\n",
+					urb->actual_length,
+					txsize-sizeof(pdu_header));
+				kfree(iov);
+				usbip_event_add(&sdev->ud,
+						SDEV_EVENT_ERROR_TCP);
+				return -1;
+			}
+		}
+
+		/* 3. setup iso_packet_descriptor */
+		if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+			ssize_t len = 0;
+
+			iso_buffer = usbip_alloc_iso_desc_pdu(urb, &len);
+			if (!iso_buffer) {
+				usbip_event_add(&sdev->ud,
+						SDEV_EVENT_ERROR_MALLOC);
+				kfree(iov);
+				return -1;
+			}
+
+			iov[iovnum].iov_base = iso_buffer;
+			iov[iovnum].iov_len  = len;
+			txsize += len;
+			iovnum++;
+		}
+
+		ret = kernel_sendmsg(sdev->ud.tcp_socket, &msg,
+						iov,  iovnum, txsize);
+		if (ret != txsize) {
+			dev_err(&sdev->udev->dev,
+				"sendmsg failed!, retval %d for %zd\n",
+				ret, txsize);
+			kfree(iov);
+			kfree(iso_buffer);
+			usbip_event_add(&sdev->ud, SDEV_EVENT_ERROR_TCP);
+			return -1;
+		}
+
+		kfree(iov);
+		kfree(iso_buffer);
+
+		total_size += txsize;
+	}
+
+	spin_lock_irqsave(&sdev->priv_lock, flags);
+	list_for_each_entry_safe(priv, tmp, &sdev->priv_free, list) {
+		stub_free_priv_and_urb(priv);
+	}
+	spin_unlock_irqrestore(&sdev->priv_lock, flags);
+
+	return total_size;
+}
+
+static struct stub_unlink *dequeue_from_unlink_tx(struct stub_device *sdev)
+{
+	unsigned long flags;
+	struct stub_unlink *unlink, *tmp;
+
+	spin_lock_irqsave(&sdev->priv_lock, flags);
+
+	list_for_each_entry_safe(unlink, tmp, &sdev->unlink_tx, list) {
+		list_move_tail(&unlink->list, &sdev->unlink_free);
+		spin_unlock_irqrestore(&sdev->priv_lock, flags);
+		return unlink;
+	}
+
+	spin_unlock_irqrestore(&sdev->priv_lock, flags);
+
+	return NULL;
+}
+
+static int stub_send_ret_unlink(struct stub_device *sdev)
+{
+	unsigned long flags;
+	struct stub_unlink *unlink, *tmp;
+
+	struct msghdr msg;
+	struct kvec iov[1];
+	size_t txsize;
+
+	size_t total_size = 0;
+
+	while ((unlink = dequeue_from_unlink_tx(sdev)) != NULL) {
+		int ret;
+		struct usbip_header pdu_header;
+
+		txsize = 0;
+		memset(&pdu_header, 0, sizeof(pdu_header));
+		memset(&msg, 0, sizeof(msg));
+		memset(&iov, 0, sizeof(iov));
+
+		usbip_dbg_stub_tx("setup ret unlink %lu\n", unlink->seqnum);
+
+		/* 1. setup usbip_header */
+		setup_ret_unlink_pdu(&pdu_header, unlink);
+		usbip_header_correct_endian(&pdu_header, 1);
+
+		iov[0].iov_base = &pdu_header;
+		iov[0].iov_len  = sizeof(pdu_header);
+		txsize += sizeof(pdu_header);
+
+		ret = kernel_sendmsg(sdev->ud.tcp_socket, &msg, iov,
+				     1, txsize);
+		if (ret != txsize) {
+			dev_err(&sdev->udev->dev,
+				"sendmsg failed!, retval %d for %zd\n",
+				ret, txsize);
+			usbip_event_add(&sdev->ud, SDEV_EVENT_ERROR_TCP);
+			return -1;
+		}
+
+		usbip_dbg_stub_tx("send txdata\n");
+		total_size += txsize;
+	}
+
+	spin_lock_irqsave(&sdev->priv_lock, flags);
+
+	list_for_each_entry_safe(unlink, tmp, &sdev->unlink_free, list) {
+		list_del(&unlink->list);
+		kfree(unlink);
+	}
+
+	spin_unlock_irqrestore(&sdev->priv_lock, flags);
+
+	return total_size;
+}
+
+int stub_tx_loop(void *data)
+{
+	struct usbip_device *ud = data;
+	struct stub_device *sdev = container_of(ud, struct stub_device, ud);
+
+	while (!kthread_should_stop()) {
+		if (usbip_event_happened(ud))
+			break;
+
+		/*
+		 * send_ret_submit comes earlier than send_ret_unlink.  stub_rx
+		 * looks at only priv_init queue. If the completion of a URB is
+		 * earlier than the receive of CMD_UNLINK, priv is moved to
+		 * priv_tx queue and stub_rx does not find the target priv. In
+		 * this case, vhci_rx receives the result of the submit request
+		 * and then receives the result of the unlink request. The
+		 * result of the submit is given back to the usbcore as the
+		 * completion of the unlink request. The request of the
+		 * unlink is ignored. This is ok because a driver who calls
+		 * usb_unlink_urb() understands the unlink was too late by
+		 * getting the status of the given-backed URB which has the
+		 * status of usb_submit_urb().
+		 */
+		if (stub_send_ret_submit(sdev) < 0)
+			break;
+
+		if (stub_send_ret_unlink(sdev) < 0)
+			break;
+
+		wait_event_interruptible(sdev->tx_waitq,
+					 (!list_empty(&sdev->priv_tx) ||
+					  !list_empty(&sdev->unlink_tx) ||
+					  kthread_should_stop()));
+	}
+
+	return 0;
+}
diff --git a/drivers/usb/usbip/usbip_common.c b/drivers/usb/usbip/usbip_common.c
new file mode 100644
index 000000000..f8b326eed
--- /dev/null
+++ b/drivers/usb/usbip/usbip_common.c
@@ -0,0 +1,852 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ * Copyright (C) 2015-2016 Samsung Electronics
+ *               Krzysztof Opasiak <k.opasiak@samsung.com>
+ */
+
+#include <asm/byteorder.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <net/sock.h>
+
+#include "usbip_common.h"
+
+#define DRIVER_AUTHOR "Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>"
+#define DRIVER_DESC "USB/IP Core"
+
+#ifdef CONFIG_USBIP_DEBUG
+unsigned long usbip_debug_flag = 0xffffffff;
+#else
+unsigned long usbip_debug_flag;
+#endif
+EXPORT_SYMBOL_GPL(usbip_debug_flag);
+module_param(usbip_debug_flag, ulong, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(usbip_debug_flag, "debug flags (defined in usbip_common.h)");
+
+/* FIXME */
+struct device_attribute dev_attr_usbip_debug;
+EXPORT_SYMBOL_GPL(dev_attr_usbip_debug);
+
+static ssize_t usbip_debug_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%lx\n", usbip_debug_flag);
+}
+
+static ssize_t usbip_debug_store(struct device *dev,
+				 struct device_attribute *attr, const char *buf,
+				 size_t count)
+{
+	if (sscanf(buf, "%lx", &usbip_debug_flag) != 1)
+		return -EINVAL;
+	return count;
+}
+DEVICE_ATTR_RW(usbip_debug);
+
+static void usbip_dump_buffer(char *buff, int bufflen)
+{
+	print_hex_dump(KERN_DEBUG, "usbip-core", DUMP_PREFIX_OFFSET, 16, 4,
+		       buff, bufflen, false);
+}
+
+static void usbip_dump_pipe(unsigned int p)
+{
+	unsigned char type = usb_pipetype(p);
+	unsigned char ep   = usb_pipeendpoint(p);
+	unsigned char dev  = usb_pipedevice(p);
+	unsigned char dir  = usb_pipein(p);
+
+	pr_debug("dev(%d) ep(%d) [%s] ", dev, ep, dir ? "IN" : "OUT");
+
+	switch (type) {
+	case PIPE_ISOCHRONOUS:
+		pr_debug("ISO\n");
+		break;
+	case PIPE_INTERRUPT:
+		pr_debug("INT\n");
+		break;
+	case PIPE_CONTROL:
+		pr_debug("CTRL\n");
+		break;
+	case PIPE_BULK:
+		pr_debug("BULK\n");
+		break;
+	default:
+		pr_debug("ERR\n");
+		break;
+	}
+}
+
+static void usbip_dump_usb_device(struct usb_device *udev)
+{
+	struct device *dev = &udev->dev;
+	int i;
+
+	dev_dbg(dev, "       devnum(%d) devpath(%s) usb speed(%s)",
+		udev->devnum, udev->devpath, usb_speed_string(udev->speed));
+
+	pr_debug("tt hub ttport %d\n", udev->ttport);
+
+	dev_dbg(dev, "                    ");
+	for (i = 0; i < 16; i++)
+		pr_debug(" %2u", i);
+	pr_debug("\n");
+
+	dev_dbg(dev, "       toggle0(IN) :");
+	for (i = 0; i < 16; i++)
+		pr_debug(" %2u", (udev->toggle[0] & (1 << i)) ? 1 : 0);
+	pr_debug("\n");
+
+	dev_dbg(dev, "       toggle1(OUT):");
+	for (i = 0; i < 16; i++)
+		pr_debug(" %2u", (udev->toggle[1] & (1 << i)) ? 1 : 0);
+	pr_debug("\n");
+
+	dev_dbg(dev, "       epmaxp_in   :");
+	for (i = 0; i < 16; i++) {
+		if (udev->ep_in[i])
+			pr_debug(" %2u",
+			    le16_to_cpu(udev->ep_in[i]->desc.wMaxPacketSize));
+	}
+	pr_debug("\n");
+
+	dev_dbg(dev, "       epmaxp_out  :");
+	for (i = 0; i < 16; i++) {
+		if (udev->ep_out[i])
+			pr_debug(" %2u",
+			    le16_to_cpu(udev->ep_out[i]->desc.wMaxPacketSize));
+	}
+	pr_debug("\n");
+
+	dev_dbg(dev, "parent %s, bus %s\n", dev_name(&udev->parent->dev),
+		udev->bus->bus_name);
+
+	dev_dbg(dev, "have_langid %d, string_langid %d\n",
+		udev->have_langid, udev->string_langid);
+
+	dev_dbg(dev, "maxchild %d\n", udev->maxchild);
+}
+
+static void usbip_dump_request_type(__u8 rt)
+{
+	switch (rt & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		pr_debug("DEVICE");
+		break;
+	case USB_RECIP_INTERFACE:
+		pr_debug("INTERF");
+		break;
+	case USB_RECIP_ENDPOINT:
+		pr_debug("ENDPOI");
+		break;
+	case USB_RECIP_OTHER:
+		pr_debug("OTHER ");
+		break;
+	default:
+		pr_debug("------");
+		break;
+	}
+}
+
+static void usbip_dump_usb_ctrlrequest(struct usb_ctrlrequest *cmd)
+{
+	if (!cmd) {
+		pr_debug("       : null pointer\n");
+		return;
+	}
+
+	pr_debug("       ");
+	pr_debug("bRequestType(%02X) bRequest(%02X) wValue(%04X) wIndex(%04X) wLength(%04X) ",
+		 cmd->bRequestType, cmd->bRequest,
+		 cmd->wValue, cmd->wIndex, cmd->wLength);
+	pr_debug("\n       ");
+
+	if ((cmd->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		pr_debug("STANDARD ");
+		switch (cmd->bRequest) {
+		case USB_REQ_GET_STATUS:
+			pr_debug("GET_STATUS\n");
+			break;
+		case USB_REQ_CLEAR_FEATURE:
+			pr_debug("CLEAR_FEAT\n");
+			break;
+		case USB_REQ_SET_FEATURE:
+			pr_debug("SET_FEAT\n");
+			break;
+		case USB_REQ_SET_ADDRESS:
+			pr_debug("SET_ADDRRS\n");
+			break;
+		case USB_REQ_GET_DESCRIPTOR:
+			pr_debug("GET_DESCRI\n");
+			break;
+		case USB_REQ_SET_DESCRIPTOR:
+			pr_debug("SET_DESCRI\n");
+			break;
+		case USB_REQ_GET_CONFIGURATION:
+			pr_debug("GET_CONFIG\n");
+			break;
+		case USB_REQ_SET_CONFIGURATION:
+			pr_debug("SET_CONFIG\n");
+			break;
+		case USB_REQ_GET_INTERFACE:
+			pr_debug("GET_INTERF\n");
+			break;
+		case USB_REQ_SET_INTERFACE:
+			pr_debug("SET_INTERF\n");
+			break;
+		case USB_REQ_SYNCH_FRAME:
+			pr_debug("SYNC_FRAME\n");
+			break;
+		default:
+			pr_debug("REQ(%02X)\n", cmd->bRequest);
+			break;
+		}
+		usbip_dump_request_type(cmd->bRequestType);
+	} else if ((cmd->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) {
+		pr_debug("CLASS\n");
+	} else if ((cmd->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) {
+		pr_debug("VENDOR\n");
+	} else if ((cmd->bRequestType & USB_TYPE_MASK) == USB_TYPE_RESERVED) {
+		pr_debug("RESERVED\n");
+	}
+}
+
+void usbip_dump_urb(struct urb *urb)
+{
+	struct device *dev;
+
+	if (!urb) {
+		pr_debug("urb: null pointer!!\n");
+		return;
+	}
+
+	if (!urb->dev) {
+		pr_debug("urb->dev: null pointer!!\n");
+		return;
+	}
+
+	dev = &urb->dev->dev;
+
+	usbip_dump_usb_device(urb->dev);
+
+	dev_dbg(dev, "   pipe                  :%08x ", urb->pipe);
+
+	usbip_dump_pipe(urb->pipe);
+
+	dev_dbg(dev, "   status                :%d\n", urb->status);
+	dev_dbg(dev, "   transfer_flags        :%08X\n", urb->transfer_flags);
+	dev_dbg(dev, "   transfer_buffer_length:%d\n",
+						urb->transfer_buffer_length);
+	dev_dbg(dev, "   actual_length         :%d\n", urb->actual_length);
+
+	if (urb->setup_packet && usb_pipetype(urb->pipe) == PIPE_CONTROL)
+		usbip_dump_usb_ctrlrequest(
+			(struct usb_ctrlrequest *)urb->setup_packet);
+
+	dev_dbg(dev, "   start_frame           :%d\n", urb->start_frame);
+	dev_dbg(dev, "   number_of_packets     :%d\n", urb->number_of_packets);
+	dev_dbg(dev, "   interval              :%d\n", urb->interval);
+	dev_dbg(dev, "   error_count           :%d\n", urb->error_count);
+}
+EXPORT_SYMBOL_GPL(usbip_dump_urb);
+
+void usbip_dump_header(struct usbip_header *pdu)
+{
+	pr_debug("BASE: cmd %u seq %u devid %u dir %u ep %u\n",
+		 pdu->base.command,
+		 pdu->base.seqnum,
+		 pdu->base.devid,
+		 pdu->base.direction,
+		 pdu->base.ep);
+
+	switch (pdu->base.command) {
+	case USBIP_CMD_SUBMIT:
+		pr_debug("USBIP_CMD_SUBMIT: x_flags %u x_len %u sf %u #p %d iv %d\n",
+			 pdu->u.cmd_submit.transfer_flags,
+			 pdu->u.cmd_submit.transfer_buffer_length,
+			 pdu->u.cmd_submit.start_frame,
+			 pdu->u.cmd_submit.number_of_packets,
+			 pdu->u.cmd_submit.interval);
+		break;
+	case USBIP_CMD_UNLINK:
+		pr_debug("USBIP_CMD_UNLINK: seq %u\n",
+			 pdu->u.cmd_unlink.seqnum);
+		break;
+	case USBIP_RET_SUBMIT:
+		pr_debug("USBIP_RET_SUBMIT: st %d al %u sf %d #p %d ec %d\n",
+			 pdu->u.ret_submit.status,
+			 pdu->u.ret_submit.actual_length,
+			 pdu->u.ret_submit.start_frame,
+			 pdu->u.ret_submit.number_of_packets,
+			 pdu->u.ret_submit.error_count);
+		break;
+	case USBIP_RET_UNLINK:
+		pr_debug("USBIP_RET_UNLINK: status %d\n",
+			 pdu->u.ret_unlink.status);
+		break;
+	default:
+		/* NOT REACHED */
+		pr_err("unknown command\n");
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(usbip_dump_header);
+
+/* Receive data over TCP/IP. */
+int usbip_recv(struct socket *sock, void *buf, int size)
+{
+	int result;
+	struct kvec iov = {.iov_base = buf, .iov_len = size};
+	struct msghdr msg = {.msg_flags = MSG_NOSIGNAL};
+	int total = 0;
+
+	if (!sock || !buf || !size)
+		return -EINVAL;
+
+	iov_iter_kvec(&msg.msg_iter, ITER_DEST, &iov, 1, size);
+
+	usbip_dbg_xmit("enter\n");
+
+	do {
+		sock->sk->sk_allocation = GFP_NOIO;
+
+		result = sock_recvmsg(sock, &msg, MSG_WAITALL);
+		if (result <= 0)
+			goto err;
+
+		total += result;
+	} while (msg_data_left(&msg));
+
+	if (usbip_dbg_flag_xmit) {
+		pr_debug("receiving....\n");
+		usbip_dump_buffer(buf, size);
+		pr_debug("received, osize %d ret %d size %zd total %d\n",
+			 size, result, msg_data_left(&msg), total);
+	}
+
+	return total;
+
+err:
+	return result;
+}
+EXPORT_SYMBOL_GPL(usbip_recv);
+
+/* there may be more cases to tweak the flags. */
+static unsigned int tweak_transfer_flags(unsigned int flags)
+{
+	flags &= ~URB_NO_TRANSFER_DMA_MAP;
+	return flags;
+}
+
+/*
+ * USBIP driver packs URB transfer flags in PDUs that are exchanged
+ * between Server (usbip_host) and Client (vhci_hcd). URB_* flags
+ * are internal to kernel and could change. Where as USBIP URB flags
+ * exchanged in PDUs are USBIP user API must not change.
+ *
+ * USBIP_URB* flags are exported as explicit API and client and server
+ * do mapping from kernel flags to USBIP_URB*. Details as follows:
+ *
+ * Client tx path (USBIP_CMD_SUBMIT):
+ * - Maps URB_* to USBIP_URB_* when it sends USBIP_CMD_SUBMIT packet.
+ *
+ * Server rx path (USBIP_CMD_SUBMIT):
+ * - Maps USBIP_URB_* to URB_* when it receives USBIP_CMD_SUBMIT packet.
+ *
+ * Flags aren't included in USBIP_CMD_UNLINK and USBIP_RET_SUBMIT packets
+ * and no special handling is needed for them in the following cases:
+ * - Server rx path (USBIP_CMD_UNLINK)
+ * - Client rx path & Server tx path (USBIP_RET_SUBMIT)
+ *
+ * Code paths:
+ * usbip_pack_pdu() is the common routine that handles packing pdu from
+ * urb and unpack pdu to an urb.
+ *
+ * usbip_pack_cmd_submit() and usbip_pack_ret_submit() handle
+ * USBIP_CMD_SUBMIT and USBIP_RET_SUBMIT respectively.
+ *
+ * usbip_map_urb_to_usbip() and usbip_map_usbip_to_urb() are used
+ * by usbip_pack_cmd_submit() and usbip_pack_ret_submit() to map
+ * flags.
+ */
+
+struct urb_to_usbip_flags {
+	u32 urb_flag;
+	u32 usbip_flag;
+};
+
+#define NUM_USBIP_FLAGS	17
+
+static const struct urb_to_usbip_flags flag_map[NUM_USBIP_FLAGS] = {
+	{URB_SHORT_NOT_OK, USBIP_URB_SHORT_NOT_OK},
+	{URB_ISO_ASAP, USBIP_URB_ISO_ASAP},
+	{URB_NO_TRANSFER_DMA_MAP, USBIP_URB_NO_TRANSFER_DMA_MAP},
+	{URB_ZERO_PACKET, USBIP_URB_ZERO_PACKET},
+	{URB_NO_INTERRUPT, USBIP_URB_NO_INTERRUPT},
+	{URB_FREE_BUFFER, USBIP_URB_FREE_BUFFER},
+	{URB_DIR_IN, USBIP_URB_DIR_IN},
+	{URB_DIR_OUT, USBIP_URB_DIR_OUT},
+	{URB_DIR_MASK, USBIP_URB_DIR_MASK},
+	{URB_DMA_MAP_SINGLE, USBIP_URB_DMA_MAP_SINGLE},
+	{URB_DMA_MAP_PAGE, USBIP_URB_DMA_MAP_PAGE},
+	{URB_DMA_MAP_SG, USBIP_URB_DMA_MAP_SG},
+	{URB_MAP_LOCAL, USBIP_URB_MAP_LOCAL},
+	{URB_SETUP_MAP_SINGLE, USBIP_URB_SETUP_MAP_SINGLE},
+	{URB_SETUP_MAP_LOCAL, USBIP_URB_SETUP_MAP_LOCAL},
+	{URB_DMA_SG_COMBINED, USBIP_URB_DMA_SG_COMBINED},
+	{URB_ALIGNED_TEMP_BUFFER, USBIP_URB_ALIGNED_TEMP_BUFFER},
+};
+
+static unsigned int urb_to_usbip(unsigned int flags)
+{
+	unsigned int map_flags = 0;
+	int loop;
+
+	for (loop = 0; loop < NUM_USBIP_FLAGS; loop++) {
+		if (flags & flag_map[loop].urb_flag)
+			map_flags |= flag_map[loop].usbip_flag;
+	}
+
+	return map_flags;
+}
+
+static unsigned int usbip_to_urb(unsigned int flags)
+{
+	unsigned int map_flags = 0;
+	int loop;
+
+	for (loop = 0; loop < NUM_USBIP_FLAGS; loop++) {
+		if (flags & flag_map[loop].usbip_flag)
+			map_flags |= flag_map[loop].urb_flag;
+	}
+
+	return map_flags;
+}
+
+static void usbip_pack_cmd_submit(struct usbip_header *pdu, struct urb *urb,
+				  int pack)
+{
+	struct usbip_header_cmd_submit *spdu = &pdu->u.cmd_submit;
+
+	/*
+	 * Some members are not still implemented in usbip. I hope this issue
+	 * will be discussed when usbip is ported to other operating systems.
+	 */
+	if (pack) {
+		/* map after tweaking the urb flags */
+		spdu->transfer_flags = urb_to_usbip(tweak_transfer_flags(urb->transfer_flags));
+		spdu->transfer_buffer_length	= urb->transfer_buffer_length;
+		spdu->start_frame		= urb->start_frame;
+		spdu->number_of_packets		= urb->number_of_packets;
+		spdu->interval			= urb->interval;
+	} else  {
+		urb->transfer_flags         = usbip_to_urb(spdu->transfer_flags);
+		urb->transfer_buffer_length = spdu->transfer_buffer_length;
+		urb->start_frame            = spdu->start_frame;
+		urb->number_of_packets      = spdu->number_of_packets;
+		urb->interval               = spdu->interval;
+	}
+}
+
+static void usbip_pack_ret_submit(struct usbip_header *pdu, struct urb *urb,
+				  int pack)
+{
+	struct usbip_header_ret_submit *rpdu = &pdu->u.ret_submit;
+
+	if (pack) {
+		rpdu->status		= urb->status;
+		rpdu->actual_length	= urb->actual_length;
+		rpdu->start_frame	= urb->start_frame;
+		rpdu->number_of_packets = urb->number_of_packets;
+		rpdu->error_count	= urb->error_count;
+	} else {
+		urb->status		= rpdu->status;
+		urb->actual_length	= rpdu->actual_length;
+		urb->start_frame	= rpdu->start_frame;
+		urb->number_of_packets = rpdu->number_of_packets;
+		urb->error_count	= rpdu->error_count;
+	}
+}
+
+void usbip_pack_pdu(struct usbip_header *pdu, struct urb *urb, int cmd,
+		    int pack)
+{
+	switch (cmd) {
+	case USBIP_CMD_SUBMIT:
+		usbip_pack_cmd_submit(pdu, urb, pack);
+		break;
+	case USBIP_RET_SUBMIT:
+		usbip_pack_ret_submit(pdu, urb, pack);
+		break;
+	default:
+		/* NOT REACHED */
+		pr_err("unknown command\n");
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(usbip_pack_pdu);
+
+static void correct_endian_basic(struct usbip_header_basic *base, int send)
+{
+	if (send) {
+		base->command	= cpu_to_be32(base->command);
+		base->seqnum	= cpu_to_be32(base->seqnum);
+		base->devid	= cpu_to_be32(base->devid);
+		base->direction	= cpu_to_be32(base->direction);
+		base->ep	= cpu_to_be32(base->ep);
+	} else {
+		base->command	= be32_to_cpu(base->command);
+		base->seqnum	= be32_to_cpu(base->seqnum);
+		base->devid	= be32_to_cpu(base->devid);
+		base->direction	= be32_to_cpu(base->direction);
+		base->ep	= be32_to_cpu(base->ep);
+	}
+}
+
+static void correct_endian_cmd_submit(struct usbip_header_cmd_submit *pdu,
+				      int send)
+{
+	if (send) {
+		pdu->transfer_flags = cpu_to_be32(pdu->transfer_flags);
+
+		cpu_to_be32s(&pdu->transfer_buffer_length);
+		cpu_to_be32s(&pdu->start_frame);
+		cpu_to_be32s(&pdu->number_of_packets);
+		cpu_to_be32s(&pdu->interval);
+	} else {
+		pdu->transfer_flags = be32_to_cpu(pdu->transfer_flags);
+
+		be32_to_cpus(&pdu->transfer_buffer_length);
+		be32_to_cpus(&pdu->start_frame);
+		be32_to_cpus(&pdu->number_of_packets);
+		be32_to_cpus(&pdu->interval);
+	}
+}
+
+static void correct_endian_ret_submit(struct usbip_header_ret_submit *pdu,
+				      int send)
+{
+	if (send) {
+		cpu_to_be32s(&pdu->status);
+		cpu_to_be32s(&pdu->actual_length);
+		cpu_to_be32s(&pdu->start_frame);
+		cpu_to_be32s(&pdu->number_of_packets);
+		cpu_to_be32s(&pdu->error_count);
+	} else {
+		be32_to_cpus(&pdu->status);
+		be32_to_cpus(&pdu->actual_length);
+		be32_to_cpus(&pdu->start_frame);
+		be32_to_cpus(&pdu->number_of_packets);
+		be32_to_cpus(&pdu->error_count);
+	}
+}
+
+static void correct_endian_cmd_unlink(struct usbip_header_cmd_unlink *pdu,
+				      int send)
+{
+	if (send)
+		pdu->seqnum = cpu_to_be32(pdu->seqnum);
+	else
+		pdu->seqnum = be32_to_cpu(pdu->seqnum);
+}
+
+static void correct_endian_ret_unlink(struct usbip_header_ret_unlink *pdu,
+				      int send)
+{
+	if (send)
+		cpu_to_be32s(&pdu->status);
+	else
+		be32_to_cpus(&pdu->status);
+}
+
+void usbip_header_correct_endian(struct usbip_header *pdu, int send)
+{
+	__u32 cmd = 0;
+
+	if (send)
+		cmd = pdu->base.command;
+
+	correct_endian_basic(&pdu->base, send);
+
+	if (!send)
+		cmd = pdu->base.command;
+
+	switch (cmd) {
+	case USBIP_CMD_SUBMIT:
+		correct_endian_cmd_submit(&pdu->u.cmd_submit, send);
+		break;
+	case USBIP_RET_SUBMIT:
+		correct_endian_ret_submit(&pdu->u.ret_submit, send);
+		break;
+	case USBIP_CMD_UNLINK:
+		correct_endian_cmd_unlink(&pdu->u.cmd_unlink, send);
+		break;
+	case USBIP_RET_UNLINK:
+		correct_endian_ret_unlink(&pdu->u.ret_unlink, send);
+		break;
+	default:
+		/* NOT REACHED */
+		pr_err("unknown command\n");
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(usbip_header_correct_endian);
+
+static void usbip_iso_packet_correct_endian(
+		struct usbip_iso_packet_descriptor *iso, int send)
+{
+	/* does not need all members. but copy all simply. */
+	if (send) {
+		iso->offset	= cpu_to_be32(iso->offset);
+		iso->length	= cpu_to_be32(iso->length);
+		iso->status	= cpu_to_be32(iso->status);
+		iso->actual_length = cpu_to_be32(iso->actual_length);
+	} else {
+		iso->offset	= be32_to_cpu(iso->offset);
+		iso->length	= be32_to_cpu(iso->length);
+		iso->status	= be32_to_cpu(iso->status);
+		iso->actual_length = be32_to_cpu(iso->actual_length);
+	}
+}
+
+static void usbip_pack_iso(struct usbip_iso_packet_descriptor *iso,
+			   struct usb_iso_packet_descriptor *uiso, int pack)
+{
+	if (pack) {
+		iso->offset		= uiso->offset;
+		iso->length		= uiso->length;
+		iso->status		= uiso->status;
+		iso->actual_length	= uiso->actual_length;
+	} else {
+		uiso->offset		= iso->offset;
+		uiso->length		= iso->length;
+		uiso->status		= iso->status;
+		uiso->actual_length	= iso->actual_length;
+	}
+}
+
+/* must free buffer */
+struct usbip_iso_packet_descriptor*
+usbip_alloc_iso_desc_pdu(struct urb *urb, ssize_t *bufflen)
+{
+	struct usbip_iso_packet_descriptor *iso;
+	int np = urb->number_of_packets;
+	ssize_t size = np * sizeof(*iso);
+	int i;
+
+	iso = kzalloc(size, GFP_KERNEL);
+	if (!iso)
+		return NULL;
+
+	for (i = 0; i < np; i++) {
+		usbip_pack_iso(&iso[i], &urb->iso_frame_desc[i], 1);
+		usbip_iso_packet_correct_endian(&iso[i], 1);
+	}
+
+	*bufflen = size;
+
+	return iso;
+}
+EXPORT_SYMBOL_GPL(usbip_alloc_iso_desc_pdu);
+
+/* some members of urb must be substituted before. */
+int usbip_recv_iso(struct usbip_device *ud, struct urb *urb)
+{
+	void *buff;
+	struct usbip_iso_packet_descriptor *iso;
+	int np = urb->number_of_packets;
+	int size = np * sizeof(*iso);
+	int i;
+	int ret;
+	int total_length = 0;
+
+	if (!usb_pipeisoc(urb->pipe))
+		return 0;
+
+	/* my Bluetooth dongle gets ISO URBs which are np = 0 */
+	if (np == 0)
+		return 0;
+
+	buff = kzalloc(size, GFP_KERNEL);
+	if (!buff)
+		return -ENOMEM;
+
+	ret = usbip_recv(ud->tcp_socket, buff, size);
+	if (ret != size) {
+		dev_err(&urb->dev->dev, "recv iso_frame_descriptor, %d\n",
+			ret);
+		kfree(buff);
+
+		if (ud->side == USBIP_STUB || ud->side == USBIP_VUDC)
+			usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
+		else
+			usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+
+		return -EPIPE;
+	}
+
+	iso = (struct usbip_iso_packet_descriptor *) buff;
+	for (i = 0; i < np; i++) {
+		usbip_iso_packet_correct_endian(&iso[i], 0);
+		usbip_pack_iso(&iso[i], &urb->iso_frame_desc[i], 0);
+		total_length += urb->iso_frame_desc[i].actual_length;
+	}
+
+	kfree(buff);
+
+	if (total_length != urb->actual_length) {
+		dev_err(&urb->dev->dev,
+			"total length of iso packets %d not equal to actual length of buffer %d\n",
+			total_length, urb->actual_length);
+
+		if (ud->side == USBIP_STUB || ud->side == USBIP_VUDC)
+			usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
+		else
+			usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+
+		return -EPIPE;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usbip_recv_iso);
+
+/*
+ * This functions restores the padding which was removed for optimizing
+ * the bandwidth during transfer over tcp/ip
+ *
+ * buffer and iso packets need to be stored and be in propeper endian in urb
+ * before calling this function
+ */
+void usbip_pad_iso(struct usbip_device *ud, struct urb *urb)
+{
+	int np = urb->number_of_packets;
+	int i;
+	int actualoffset = urb->actual_length;
+
+	if (!usb_pipeisoc(urb->pipe))
+		return;
+
+	/* if no packets or length of data is 0, then nothing to unpack */
+	if (np == 0 || urb->actual_length == 0)
+		return;
+
+	/*
+	 * if actual_length is transfer_buffer_length then no padding is
+	 * present.
+	 */
+	if (urb->actual_length == urb->transfer_buffer_length)
+		return;
+
+	/*
+	 * loop over all packets from last to first (to prevent overwriting
+	 * memory when padding) and move them into the proper place
+	 */
+	for (i = np-1; i > 0; i--) {
+		actualoffset -= urb->iso_frame_desc[i].actual_length;
+		memmove(urb->transfer_buffer + urb->iso_frame_desc[i].offset,
+			urb->transfer_buffer + actualoffset,
+			urb->iso_frame_desc[i].actual_length);
+	}
+}
+EXPORT_SYMBOL_GPL(usbip_pad_iso);
+
+/* some members of urb must be substituted before. */
+int usbip_recv_xbuff(struct usbip_device *ud, struct urb *urb)
+{
+	struct scatterlist *sg;
+	int ret = 0;
+	int recv;
+	int size;
+	int copy;
+	int i;
+
+	if (ud->side == USBIP_STUB || ud->side == USBIP_VUDC) {
+		/* the direction of urb must be OUT. */
+		if (usb_pipein(urb->pipe))
+			return 0;
+
+		size = urb->transfer_buffer_length;
+	} else {
+		/* the direction of urb must be IN. */
+		if (usb_pipeout(urb->pipe))
+			return 0;
+
+		size = urb->actual_length;
+	}
+
+	/* no need to recv xbuff */
+	if (!(size > 0))
+		return 0;
+
+	if (size > urb->transfer_buffer_length)
+		/* should not happen, probably malicious packet */
+		goto error;
+
+	if (urb->num_sgs) {
+		copy = size;
+		for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+			int recv_size;
+
+			if (copy < sg->length)
+				recv_size = copy;
+			else
+				recv_size = sg->length;
+
+			recv = usbip_recv(ud->tcp_socket, sg_virt(sg),
+						recv_size);
+
+			if (recv != recv_size)
+				goto error;
+
+			copy -= recv;
+			ret += recv;
+
+			if (!copy)
+				break;
+		}
+
+		if (ret != size)
+			goto error;
+	} else {
+		ret = usbip_recv(ud->tcp_socket, urb->transfer_buffer, size);
+		if (ret != size)
+			goto error;
+	}
+
+	return ret;
+
+error:
+	dev_err(&urb->dev->dev, "recv xbuf, %d\n", ret);
+	if (ud->side == USBIP_STUB || ud->side == USBIP_VUDC)
+		usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
+	else
+		usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+
+	return -EPIPE;
+}
+EXPORT_SYMBOL_GPL(usbip_recv_xbuff);
+
+static int __init usbip_core_init(void)
+{
+	return usbip_init_eh();
+}
+
+static void __exit usbip_core_exit(void)
+{
+	usbip_finish_eh();
+	return;
+}
+
+module_init(usbip_core_init);
+module_exit(usbip_core_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/usbip/usbip_common.h b/drivers/usb/usbip/usbip_common.h
new file mode 100644
index 000000000..d8cbd2dfc
--- /dev/null
+++ b/drivers/usb/usbip/usbip_common.h
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ * Copyright (C) 2015-2016 Samsung Electronics
+ *               Krzysztof Opasiak <k.opasiak@samsung.com>
+ */
+
+#ifndef __USBIP_COMMON_H
+#define __USBIP_COMMON_H
+
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/net.h>
+#include <linux/printk.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/usb.h>
+#include <linux/wait.h>
+#include <linux/sched/task.h>
+#include <linux/kcov.h>
+#include <uapi/linux/usbip.h>
+
+#undef pr_fmt
+
+#ifdef DEBUG
+#define pr_fmt(fmt)     KBUILD_MODNAME ": %s:%d: " fmt, __func__, __LINE__
+#else
+#define pr_fmt(fmt)     KBUILD_MODNAME ": " fmt
+#endif
+
+enum {
+	usbip_debug_xmit	= (1 << 0),
+	usbip_debug_sysfs	= (1 << 1),
+	usbip_debug_urb		= (1 << 2),
+	usbip_debug_eh		= (1 << 3),
+
+	usbip_debug_stub_cmp	= (1 << 8),
+	usbip_debug_stub_dev	= (1 << 9),
+	usbip_debug_stub_rx	= (1 << 10),
+	usbip_debug_stub_tx	= (1 << 11),
+
+	usbip_debug_vhci_rh	= (1 << 8),
+	usbip_debug_vhci_hc	= (1 << 9),
+	usbip_debug_vhci_rx	= (1 << 10),
+	usbip_debug_vhci_tx	= (1 << 11),
+	usbip_debug_vhci_sysfs  = (1 << 12)
+};
+
+#define usbip_dbg_flag_xmit	(usbip_debug_flag & usbip_debug_xmit)
+#define usbip_dbg_flag_vhci_rh	(usbip_debug_flag & usbip_debug_vhci_rh)
+#define usbip_dbg_flag_vhci_hc	(usbip_debug_flag & usbip_debug_vhci_hc)
+#define usbip_dbg_flag_vhci_rx	(usbip_debug_flag & usbip_debug_vhci_rx)
+#define usbip_dbg_flag_vhci_tx	(usbip_debug_flag & usbip_debug_vhci_tx)
+#define usbip_dbg_flag_stub_rx	(usbip_debug_flag & usbip_debug_stub_rx)
+#define usbip_dbg_flag_stub_tx	(usbip_debug_flag & usbip_debug_stub_tx)
+#define usbip_dbg_flag_vhci_sysfs  (usbip_debug_flag & usbip_debug_vhci_sysfs)
+
+extern unsigned long usbip_debug_flag;
+extern struct device_attribute dev_attr_usbip_debug;
+
+#define usbip_dbg_with_flag(flag, fmt, args...)		\
+	do {						\
+		if (flag & usbip_debug_flag)		\
+			pr_debug(fmt, ##args);		\
+	} while (0)
+
+#define usbip_dbg_sysfs(fmt, args...) \
+	usbip_dbg_with_flag(usbip_debug_sysfs, fmt , ##args)
+#define usbip_dbg_xmit(fmt, args...) \
+	usbip_dbg_with_flag(usbip_debug_xmit, fmt , ##args)
+#define usbip_dbg_urb(fmt, args...) \
+	usbip_dbg_with_flag(usbip_debug_urb, fmt , ##args)
+#define usbip_dbg_eh(fmt, args...) \
+	usbip_dbg_with_flag(usbip_debug_eh, fmt , ##args)
+
+#define usbip_dbg_vhci_rh(fmt, args...)	\
+	usbip_dbg_with_flag(usbip_debug_vhci_rh, fmt , ##args)
+#define usbip_dbg_vhci_hc(fmt, args...)	\
+	usbip_dbg_with_flag(usbip_debug_vhci_hc, fmt , ##args)
+#define usbip_dbg_vhci_rx(fmt, args...)	\
+	usbip_dbg_with_flag(usbip_debug_vhci_rx, fmt , ##args)
+#define usbip_dbg_vhci_tx(fmt, args...)	\
+	usbip_dbg_with_flag(usbip_debug_vhci_tx, fmt , ##args)
+#define usbip_dbg_vhci_sysfs(fmt, args...) \
+	usbip_dbg_with_flag(usbip_debug_vhci_sysfs, fmt , ##args)
+
+#define usbip_dbg_stub_cmp(fmt, args...) \
+	usbip_dbg_with_flag(usbip_debug_stub_cmp, fmt , ##args)
+#define usbip_dbg_stub_rx(fmt, args...) \
+	usbip_dbg_with_flag(usbip_debug_stub_rx, fmt , ##args)
+#define usbip_dbg_stub_tx(fmt, args...) \
+	usbip_dbg_with_flag(usbip_debug_stub_tx, fmt , ##args)
+
+/*
+ * USB/IP request headers
+ *
+ * Each request is transferred across the network to its counterpart, which
+ * facilitates the normal USB communication. The values contained in the headers
+ * are basically the same as in a URB. Currently, four request types are
+ * defined:
+ *
+ *  - USBIP_CMD_SUBMIT: a USB request block, corresponds to usb_submit_urb()
+ *    (client to server)
+ *
+ *  - USBIP_RET_SUBMIT: the result of USBIP_CMD_SUBMIT
+ *    (server to client)
+ *
+ *  - USBIP_CMD_UNLINK: an unlink request of a pending USBIP_CMD_SUBMIT,
+ *    corresponds to usb_unlink_urb()
+ *    (client to server)
+ *
+ *  - USBIP_RET_UNLINK: the result of USBIP_CMD_UNLINK
+ *    (server to client)
+ *
+ */
+#define USBIP_CMD_SUBMIT	0x0001
+#define USBIP_CMD_UNLINK	0x0002
+#define USBIP_RET_SUBMIT	0x0003
+#define USBIP_RET_UNLINK	0x0004
+
+#define USBIP_DIR_OUT	0x00
+#define USBIP_DIR_IN	0x01
+
+/*
+ * Arbitrary limit for the maximum number of isochronous packets in an URB,
+ * compare for example the uhci_submit_isochronous function in
+ * drivers/usb/host/uhci-q.c
+ */
+#define USBIP_MAX_ISO_PACKETS 1024
+
+/**
+ * struct usbip_header_basic - data pertinent to every request
+ * @command: the usbip request type
+ * @seqnum: sequential number that identifies requests; incremented per
+ *	    connection
+ * @devid: specifies a remote USB device uniquely instead of busnum and devnum;
+ *	   in the stub driver, this value is ((busnum << 16) | devnum)
+ * @direction: direction of the transfer
+ * @ep: endpoint number
+ */
+struct usbip_header_basic {
+	__u32 command;
+	__u32 seqnum;
+	__u32 devid;
+	__u32 direction;
+	__u32 ep;
+} __packed;
+
+/**
+ * struct usbip_header_cmd_submit - USBIP_CMD_SUBMIT packet header
+ * @transfer_flags: URB flags
+ * @transfer_buffer_length: the data size for (in) or (out) transfer
+ * @start_frame: initial frame for isochronous or interrupt transfers
+ * @number_of_packets: number of isochronous packets
+ * @interval: maximum time for the request on the server-side host controller
+ * @setup: setup data for a control request
+ */
+struct usbip_header_cmd_submit {
+	__u32 transfer_flags;
+	__s32 transfer_buffer_length;
+
+	/* it is difficult for usbip to sync frames (reserved only?) */
+	__s32 start_frame;
+	__s32 number_of_packets;
+	__s32 interval;
+
+	unsigned char setup[8];
+} __packed;
+
+/**
+ * struct usbip_header_ret_submit - USBIP_RET_SUBMIT packet header
+ * @status: return status of a non-iso request
+ * @actual_length: number of bytes transferred
+ * @start_frame: initial frame for isochronous or interrupt transfers
+ * @number_of_packets: number of isochronous packets
+ * @error_count: number of errors for isochronous transfers
+ */
+struct usbip_header_ret_submit {
+	__s32 status;
+	__s32 actual_length;
+	__s32 start_frame;
+	__s32 number_of_packets;
+	__s32 error_count;
+} __packed;
+
+/**
+ * struct usbip_header_cmd_unlink - USBIP_CMD_UNLINK packet header
+ * @seqnum: the URB seqnum to unlink
+ */
+struct usbip_header_cmd_unlink {
+	__u32 seqnum;
+} __packed;
+
+/**
+ * struct usbip_header_ret_unlink - USBIP_RET_UNLINK packet header
+ * @status: return status of the request
+ */
+struct usbip_header_ret_unlink {
+	__s32 status;
+} __packed;
+
+/**
+ * struct usbip_header - common header for all usbip packets
+ * @base: the basic header
+ * @u: packet type dependent header
+ */
+struct usbip_header {
+	struct usbip_header_basic base;
+
+	union {
+		struct usbip_header_cmd_submit	cmd_submit;
+		struct usbip_header_ret_submit	ret_submit;
+		struct usbip_header_cmd_unlink	cmd_unlink;
+		struct usbip_header_ret_unlink	ret_unlink;
+	} u;
+} __packed;
+
+/*
+ * This is the same as usb_iso_packet_descriptor but packed for pdu.
+ */
+struct usbip_iso_packet_descriptor {
+	__u32 offset;
+	__u32 length;			/* expected length */
+	__u32 actual_length;
+	__u32 status;
+} __packed;
+
+enum usbip_side {
+	USBIP_VHCI,
+	USBIP_STUB,
+	USBIP_VUDC,
+};
+
+/* event handler */
+#define USBIP_EH_SHUTDOWN	(1 << 0)
+#define USBIP_EH_BYE		(1 << 1)
+#define USBIP_EH_RESET		(1 << 2)
+#define USBIP_EH_UNUSABLE	(1 << 3)
+
+#define	SDEV_EVENT_REMOVED	(USBIP_EH_SHUTDOWN | USBIP_EH_BYE)
+#define	SDEV_EVENT_DOWN		(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
+#define	SDEV_EVENT_ERROR_TCP	(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
+#define	SDEV_EVENT_ERROR_SUBMIT	(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
+#define	SDEV_EVENT_ERROR_MALLOC	(USBIP_EH_SHUTDOWN | USBIP_EH_UNUSABLE)
+
+#define VUDC_EVENT_REMOVED   (USBIP_EH_SHUTDOWN | USBIP_EH_RESET | USBIP_EH_BYE)
+#define	VUDC_EVENT_DOWN		(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
+#define	VUDC_EVENT_ERROR_TCP	(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
+/* catastrophic emulated usb error */
+#define	VUDC_EVENT_ERROR_USB	(USBIP_EH_SHUTDOWN | USBIP_EH_UNUSABLE)
+#define	VUDC_EVENT_ERROR_MALLOC	(USBIP_EH_SHUTDOWN | USBIP_EH_UNUSABLE)
+
+#define	VDEV_EVENT_REMOVED (USBIP_EH_SHUTDOWN | USBIP_EH_RESET | USBIP_EH_BYE)
+#define	VDEV_EVENT_DOWN		(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
+#define	VDEV_EVENT_ERROR_TCP	(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
+#define	VDEV_EVENT_ERROR_MALLOC	(USBIP_EH_SHUTDOWN | USBIP_EH_UNUSABLE)
+
+/* a common structure for stub_device and vhci_device */
+struct usbip_device {
+	enum usbip_side side;
+	enum usbip_device_status status;
+
+	/* lock for status */
+	spinlock_t lock;
+
+	/* mutex for synchronizing sysfs store paths */
+	struct mutex sysfs_lock;
+
+	int sockfd;
+	struct socket *tcp_socket;
+
+	struct task_struct *tcp_rx;
+	struct task_struct *tcp_tx;
+
+	unsigned long event;
+	wait_queue_head_t eh_waitq;
+
+	struct eh_ops {
+		void (*shutdown)(struct usbip_device *);
+		void (*reset)(struct usbip_device *);
+		void (*unusable)(struct usbip_device *);
+	} eh_ops;
+
+#ifdef CONFIG_KCOV
+	u64 kcov_handle;
+#endif
+};
+
+#define kthread_get_run(threadfn, data, namefmt, ...)			   \
+({									   \
+	struct task_struct *__k						   \
+		= kthread_create(threadfn, data, namefmt, ## __VA_ARGS__); \
+	if (!IS_ERR(__k)) {						   \
+		get_task_struct(__k);					   \
+		wake_up_process(__k);					   \
+	}								   \
+	__k;								   \
+})
+
+#define kthread_stop_put(k)		\
+	do {				\
+		kthread_stop(k);	\
+		put_task_struct(k);	\
+	} while (0)
+
+/* usbip_common.c */
+void usbip_dump_urb(struct urb *purb);
+void usbip_dump_header(struct usbip_header *pdu);
+
+int usbip_recv(struct socket *sock, void *buf, int size);
+
+void usbip_pack_pdu(struct usbip_header *pdu, struct urb *urb, int cmd,
+		    int pack);
+void usbip_header_correct_endian(struct usbip_header *pdu, int send);
+
+struct usbip_iso_packet_descriptor*
+usbip_alloc_iso_desc_pdu(struct urb *urb, ssize_t *bufflen);
+
+/* some members of urb must be substituted before. */
+int usbip_recv_iso(struct usbip_device *ud, struct urb *urb);
+void usbip_pad_iso(struct usbip_device *ud, struct urb *urb);
+int usbip_recv_xbuff(struct usbip_device *ud, struct urb *urb);
+
+/* usbip_event.c */
+int usbip_init_eh(void);
+void usbip_finish_eh(void);
+int usbip_start_eh(struct usbip_device *ud);
+void usbip_stop_eh(struct usbip_device *ud);
+void usbip_event_add(struct usbip_device *ud, unsigned long event);
+int usbip_event_happened(struct usbip_device *ud);
+int usbip_in_eh(struct task_struct *task);
+
+static inline int interface_to_busnum(struct usb_interface *interface)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+
+	return udev->bus->busnum;
+}
+
+static inline int interface_to_devnum(struct usb_interface *interface)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+
+	return udev->devnum;
+}
+
+#ifdef CONFIG_KCOV
+
+static inline void usbip_kcov_handle_init(struct usbip_device *ud)
+{
+	ud->kcov_handle = kcov_common_handle();
+}
+
+static inline void usbip_kcov_remote_start(struct usbip_device *ud)
+{
+	kcov_remote_start_common(ud->kcov_handle);
+}
+
+static inline void usbip_kcov_remote_stop(void)
+{
+	kcov_remote_stop();
+}
+
+#else /* CONFIG_KCOV */
+
+static inline void usbip_kcov_handle_init(struct usbip_device *ud) { }
+static inline void usbip_kcov_remote_start(struct usbip_device *ud) { }
+static inline void usbip_kcov_remote_stop(void) { }
+
+#endif /* CONFIG_KCOV */
+
+#endif /* __USBIP_COMMON_H */
diff --git a/drivers/usb/usbip/usbip_event.c b/drivers/usb/usbip/usbip_event.c
new file mode 100644
index 000000000..26513540b
--- /dev/null
+++ b/drivers/usb/usbip/usbip_event.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ * Copyright (C) 2015 Nobuo Iwata
+ */
+
+#include <linux/kthread.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#include "usbip_common.h"
+
+struct usbip_event {
+	struct list_head node;
+	struct usbip_device *ud;
+};
+
+static DEFINE_SPINLOCK(event_lock);
+static LIST_HEAD(event_list);
+
+static void set_event(struct usbip_device *ud, unsigned long event)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ud->lock, flags);
+	ud->event |= event;
+	spin_unlock_irqrestore(&ud->lock, flags);
+}
+
+static void unset_event(struct usbip_device *ud, unsigned long event)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ud->lock, flags);
+	ud->event &= ~event;
+	spin_unlock_irqrestore(&ud->lock, flags);
+}
+
+static struct usbip_device *get_event(void)
+{
+	struct usbip_event *ue = NULL;
+	struct usbip_device *ud = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&event_lock, flags);
+	if (!list_empty(&event_list)) {
+		ue = list_first_entry(&event_list, struct usbip_event, node);
+		list_del(&ue->node);
+	}
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	if (ue) {
+		ud = ue->ud;
+		kfree(ue);
+	}
+	return ud;
+}
+
+static struct task_struct *worker_context;
+
+static void event_handler(struct work_struct *work)
+{
+	struct usbip_device *ud;
+
+	if (worker_context == NULL) {
+		worker_context = current;
+	}
+
+	while ((ud = get_event()) != NULL) {
+		usbip_dbg_eh("pending event %lx\n", ud->event);
+
+		mutex_lock(&ud->sysfs_lock);
+		/*
+		 * NOTE: shutdown must come first.
+		 * Shutdown the device.
+		 */
+		if (ud->event & USBIP_EH_SHUTDOWN) {
+			ud->eh_ops.shutdown(ud);
+			unset_event(ud, USBIP_EH_SHUTDOWN);
+		}
+
+		/* Reset the device. */
+		if (ud->event & USBIP_EH_RESET) {
+			ud->eh_ops.reset(ud);
+			unset_event(ud, USBIP_EH_RESET);
+		}
+
+		/* Mark the device as unusable. */
+		if (ud->event & USBIP_EH_UNUSABLE) {
+			ud->eh_ops.unusable(ud);
+			unset_event(ud, USBIP_EH_UNUSABLE);
+		}
+		mutex_unlock(&ud->sysfs_lock);
+
+		wake_up(&ud->eh_waitq);
+	}
+}
+
+int usbip_start_eh(struct usbip_device *ud)
+{
+	init_waitqueue_head(&ud->eh_waitq);
+	ud->event = 0;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usbip_start_eh);
+
+void usbip_stop_eh(struct usbip_device *ud)
+{
+	unsigned long pending = ud->event & ~USBIP_EH_BYE;
+
+	if (!(ud->event & USBIP_EH_BYE))
+		usbip_dbg_eh("usbip_eh stopping but not removed\n");
+
+	if (pending)
+		usbip_dbg_eh("usbip_eh waiting completion %lx\n", pending);
+
+	wait_event_interruptible(ud->eh_waitq, !(ud->event & ~USBIP_EH_BYE));
+	usbip_dbg_eh("usbip_eh has stopped\n");
+}
+EXPORT_SYMBOL_GPL(usbip_stop_eh);
+
+#define WORK_QUEUE_NAME "usbip_event"
+
+static struct workqueue_struct *usbip_queue;
+static DECLARE_WORK(usbip_work, event_handler);
+
+int usbip_init_eh(void)
+{
+	usbip_queue = create_singlethread_workqueue(WORK_QUEUE_NAME);
+	if (usbip_queue == NULL) {
+		pr_err("failed to create usbip_event\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+void usbip_finish_eh(void)
+{
+	destroy_workqueue(usbip_queue);
+	usbip_queue = NULL;
+}
+
+void usbip_event_add(struct usbip_device *ud, unsigned long event)
+{
+	struct usbip_event *ue;
+	unsigned long flags;
+
+	if (ud->event & USBIP_EH_BYE)
+		return;
+
+	set_event(ud, event);
+
+	spin_lock_irqsave(&event_lock, flags);
+
+	list_for_each_entry_reverse(ue, &event_list, node) {
+		if (ue->ud == ud)
+			goto out;
+	}
+
+	ue = kmalloc(sizeof(struct usbip_event), GFP_ATOMIC);
+	if (ue == NULL)
+		goto out;
+
+	ue->ud = ud;
+
+	list_add_tail(&ue->node, &event_list);
+	queue_work(usbip_queue, &usbip_work);
+
+out:
+	spin_unlock_irqrestore(&event_lock, flags);
+}
+EXPORT_SYMBOL_GPL(usbip_event_add);
+
+int usbip_event_happened(struct usbip_device *ud)
+{
+	int happened = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ud->lock, flags);
+	if (ud->event != 0)
+		happened = 1;
+	spin_unlock_irqrestore(&ud->lock, flags);
+
+	return happened;
+}
+EXPORT_SYMBOL_GPL(usbip_event_happened);
+
+int usbip_in_eh(struct task_struct *task)
+{
+	if (task == worker_context)
+		return 1;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usbip_in_eh);
diff --git a/drivers/usb/usbip/vhci.h b/drivers/usb/usbip/vhci.h
new file mode 100644
index 000000000..5659dce15
--- /dev/null
+++ b/drivers/usb/usbip/vhci.h
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ * Copyright (C) 2015 Nobuo Iwata
+ */
+
+#ifndef __USBIP_VHCI_H
+#define __USBIP_VHCI_H
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/wait.h>
+
+struct vhci_device {
+	struct usb_device *udev;
+
+	/*
+	 * devid specifies a remote usb device uniquely instead
+	 * of combination of busnum and devnum.
+	 */
+	__u32 devid;
+
+	/* speed of a remote device */
+	enum usb_device_speed speed;
+
+	/* vhci root-hub port to which this device is attached */
+	__u32 rhport;
+
+	struct usbip_device ud;
+
+	/* lock for the below link lists */
+	spinlock_t priv_lock;
+
+	/* vhci_priv is linked to one of them. */
+	struct list_head priv_tx;
+	struct list_head priv_rx;
+
+	/* vhci_unlink is linked to one of them */
+	struct list_head unlink_tx;
+	struct list_head unlink_rx;
+
+	/* vhci_tx thread sleeps for this queue */
+	wait_queue_head_t waitq_tx;
+};
+
+/* urb->hcpriv, use container_of() */
+struct vhci_priv {
+	unsigned long seqnum;
+	struct list_head list;
+
+	struct vhci_device *vdev;
+	struct urb *urb;
+};
+
+struct vhci_unlink {
+	/* seqnum of this request */
+	unsigned long seqnum;
+
+	struct list_head list;
+
+	/* seqnum of the unlink target */
+	unsigned long unlink_seqnum;
+};
+
+enum hub_speed {
+	HUB_SPEED_HIGH = 0,
+	HUB_SPEED_SUPER,
+};
+
+/* Number of supported ports. Value has an upperbound of USB_MAXCHILDREN */
+#ifdef CONFIG_USBIP_VHCI_HC_PORTS
+#define VHCI_HC_PORTS CONFIG_USBIP_VHCI_HC_PORTS
+#else
+#define VHCI_HC_PORTS 8
+#endif
+
+/* Each VHCI has 2 hubs (USB2 and USB3), each has VHCI_HC_PORTS ports */
+#define VHCI_PORTS	(VHCI_HC_PORTS*2)
+
+#ifdef CONFIG_USBIP_VHCI_NR_HCS
+#define VHCI_NR_HCS CONFIG_USBIP_VHCI_NR_HCS
+#else
+#define VHCI_NR_HCS 1
+#endif
+
+#define MAX_STATUS_NAME 16
+
+struct vhci {
+	spinlock_t lock;
+
+	struct platform_device *pdev;
+
+	struct vhci_hcd *vhci_hcd_hs;
+	struct vhci_hcd *vhci_hcd_ss;
+};
+
+/* for usb_hcd.hcd_priv[0] */
+struct vhci_hcd {
+	struct vhci *vhci;
+
+	u32 port_status[VHCI_HC_PORTS];
+
+	unsigned resuming:1;
+	unsigned long re_timeout;
+
+	atomic_t seqnum;
+
+	/*
+	 * NOTE:
+	 * wIndex shows the port number and begins from 1.
+	 * But, the index of this array begins from 0.
+	 */
+	struct vhci_device vdev[VHCI_HC_PORTS];
+};
+
+extern int vhci_num_controllers;
+extern struct vhci *vhcis;
+extern struct attribute_group vhci_attr_group;
+
+/* vhci_hcd.c */
+void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed);
+
+/* vhci_sysfs.c */
+int vhci_init_attr_group(void);
+void vhci_finish_attr_group(void);
+
+/* vhci_rx.c */
+struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, __u32 seqnum);
+int vhci_rx_loop(void *data);
+
+/* vhci_tx.c */
+int vhci_tx_loop(void *data);
+
+static inline __u32 port_to_rhport(__u32 port)
+{
+	return port % VHCI_HC_PORTS;
+}
+
+static inline int port_to_pdev_nr(__u32 port)
+{
+	return port / VHCI_PORTS;
+}
+
+static inline struct vhci_hcd *hcd_to_vhci_hcd(struct usb_hcd *hcd)
+{
+	return (struct vhci_hcd *) (hcd->hcd_priv);
+}
+
+static inline struct device *hcd_dev(struct usb_hcd *hcd)
+{
+	return (hcd)->self.controller;
+}
+
+static inline const char *hcd_name(struct usb_hcd *hcd)
+{
+	return (hcd)->self.bus_name;
+}
+
+static inline struct usb_hcd *vhci_hcd_to_hcd(struct vhci_hcd *vhci_hcd)
+{
+	return container_of((void *) vhci_hcd, struct usb_hcd, hcd_priv);
+}
+
+static inline struct vhci_hcd *vdev_to_vhci_hcd(struct vhci_device *vdev)
+{
+	return container_of((void *)(vdev - vdev->rhport), struct vhci_hcd, vdev);
+}
+
+#endif /* __USBIP_VHCI_H */
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
new file mode 100644
index 000000000..233265550
--- /dev/null
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -0,0 +1,1579 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ * Copyright (C) 2015-2016 Nobuo Iwata
+ */
+
+#include <linux/init.h>
+#include <linux/file.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "usbip_common.h"
+#include "vhci.h"
+
+#define DRIVER_AUTHOR "Takahiro Hirofuchi"
+#define DRIVER_DESC "USB/IP 'Virtual' Host Controller (VHCI) Driver"
+
+/*
+ * TODO
+ *	- update root hub emulation
+ *	- move the emulation code to userland ?
+ *		porting to other operating systems
+ *		minimize kernel code
+ *	- add suspend/resume code
+ *	- clean up everything
+ */
+
+/* See usb gadget dummy hcd */
+
+static int vhci_hub_status(struct usb_hcd *hcd, char *buff);
+static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+			    u16 wIndex, char *buff, u16 wLength);
+static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+			    gfp_t mem_flags);
+static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
+static int vhci_start(struct usb_hcd *vhci_hcd);
+static void vhci_stop(struct usb_hcd *hcd);
+static int vhci_get_frame_number(struct usb_hcd *hcd);
+
+static const char driver_name[] = "vhci_hcd";
+static const char driver_desc[] = "USB/IP Virtual Host Controller";
+
+int vhci_num_controllers = VHCI_NR_HCS;
+struct vhci *vhcis;
+
+static const char * const bit_desc[] = {
+	"CONNECTION",		/*0*/
+	"ENABLE",		/*1*/
+	"SUSPEND",		/*2*/
+	"OVER_CURRENT",		/*3*/
+	"RESET",		/*4*/
+	"L1",			/*5*/
+	"R6",			/*6*/
+	"R7",			/*7*/
+	"POWER",		/*8*/
+	"LOWSPEED",		/*9*/
+	"HIGHSPEED",		/*10*/
+	"PORT_TEST",		/*11*/
+	"INDICATOR",		/*12*/
+	"R13",			/*13*/
+	"R14",			/*14*/
+	"R15",			/*15*/
+	"C_CONNECTION",		/*16*/
+	"C_ENABLE",		/*17*/
+	"C_SUSPEND",		/*18*/
+	"C_OVER_CURRENT",	/*19*/
+	"C_RESET",		/*20*/
+	"C_L1",			/*21*/
+	"R22",			/*22*/
+	"R23",			/*23*/
+	"R24",			/*24*/
+	"R25",			/*25*/
+	"R26",			/*26*/
+	"R27",			/*27*/
+	"R28",			/*28*/
+	"R29",			/*29*/
+	"R30",			/*30*/
+	"R31",			/*31*/
+};
+
+static const char * const bit_desc_ss[] = {
+	"CONNECTION",		/*0*/
+	"ENABLE",		/*1*/
+	"SUSPEND",		/*2*/
+	"OVER_CURRENT",		/*3*/
+	"RESET",		/*4*/
+	"L1",			/*5*/
+	"R6",			/*6*/
+	"R7",			/*7*/
+	"R8",			/*8*/
+	"POWER",		/*9*/
+	"HIGHSPEED",		/*10*/
+	"PORT_TEST",		/*11*/
+	"INDICATOR",		/*12*/
+	"R13",			/*13*/
+	"R14",			/*14*/
+	"R15",			/*15*/
+	"C_CONNECTION",		/*16*/
+	"C_ENABLE",		/*17*/
+	"C_SUSPEND",		/*18*/
+	"C_OVER_CURRENT",	/*19*/
+	"C_RESET",		/*20*/
+	"C_BH_RESET",		/*21*/
+	"C_LINK_STATE",		/*22*/
+	"C_CONFIG_ERROR",	/*23*/
+	"R24",			/*24*/
+	"R25",			/*25*/
+	"R26",			/*26*/
+	"R27",			/*27*/
+	"R28",			/*28*/
+	"R29",			/*29*/
+	"R30",			/*30*/
+	"R31",			/*31*/
+};
+
+static void dump_port_status_diff(u32 prev_status, u32 new_status, bool usb3)
+{
+	int i = 0;
+	u32 bit = 1;
+	const char * const *desc = bit_desc;
+
+	if (usb3)
+		desc = bit_desc_ss;
+
+	pr_debug("status prev -> new: %08x -> %08x\n", prev_status, new_status);
+	while (bit) {
+		u32 prev = prev_status & bit;
+		u32 new = new_status & bit;
+		char change;
+
+		if (!prev && new)
+			change = '+';
+		else if (prev && !new)
+			change = '-';
+		else
+			change = ' ';
+
+		if (prev || new) {
+			pr_debug(" %c%s\n", change, desc[i]);
+
+			if (bit == 1) /* USB_PORT_STAT_CONNECTION */
+				pr_debug(" %c%s\n", change, "USB_PORT_STAT_SPEED_5GBPS");
+		}
+		bit <<= 1;
+		i++;
+	}
+	pr_debug("\n");
+}
+
+void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed)
+{
+	struct vhci_hcd	*vhci_hcd = vdev_to_vhci_hcd(vdev);
+	struct vhci *vhci = vhci_hcd->vhci;
+	int		rhport = vdev->rhport;
+	u32		status;
+	unsigned long	flags;
+
+	usbip_dbg_vhci_rh("rh_port_connect %d\n", rhport);
+
+	spin_lock_irqsave(&vhci->lock, flags);
+
+	status = vhci_hcd->port_status[rhport];
+
+	status |= USB_PORT_STAT_CONNECTION | (1 << USB_PORT_FEAT_C_CONNECTION);
+
+	switch (speed) {
+	case USB_SPEED_HIGH:
+		status |= USB_PORT_STAT_HIGH_SPEED;
+		break;
+	case USB_SPEED_LOW:
+		status |= USB_PORT_STAT_LOW_SPEED;
+		break;
+	default:
+		break;
+	}
+
+	vhci_hcd->port_status[rhport] = status;
+
+	spin_unlock_irqrestore(&vhci->lock, flags);
+
+	usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd));
+}
+
+static void rh_port_disconnect(struct vhci_device *vdev)
+{
+	struct vhci_hcd	*vhci_hcd = vdev_to_vhci_hcd(vdev);
+	struct vhci *vhci = vhci_hcd->vhci;
+	int		rhport = vdev->rhport;
+	u32		status;
+	unsigned long	flags;
+
+	usbip_dbg_vhci_rh("rh_port_disconnect %d\n", rhport);
+
+	spin_lock_irqsave(&vhci->lock, flags);
+
+	status = vhci_hcd->port_status[rhport];
+
+	status &= ~USB_PORT_STAT_CONNECTION;
+	status |= (1 << USB_PORT_FEAT_C_CONNECTION);
+
+	vhci_hcd->port_status[rhport] = status;
+
+	spin_unlock_irqrestore(&vhci->lock, flags);
+	usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd));
+}
+
+#define PORT_C_MASK				\
+	((USB_PORT_STAT_C_CONNECTION		\
+	  | USB_PORT_STAT_C_ENABLE		\
+	  | USB_PORT_STAT_C_SUSPEND		\
+	  | USB_PORT_STAT_C_OVERCURRENT		\
+	  | USB_PORT_STAT_C_RESET) << 16)
+
+/*
+ * Returns 0 if the status hasn't changed, or the number of bytes in buf.
+ * Ports are 0-indexed from the HCD point of view,
+ * and 1-indexed from the USB core pointer of view.
+ *
+ * @buf: a bitmap to show which port status has been changed.
+ *  bit  0: reserved
+ *  bit  1: the status of port 0 has been changed.
+ *  bit  2: the status of port 1 has been changed.
+ *  ...
+ */
+static int vhci_hub_status(struct usb_hcd *hcd, char *buf)
+{
+	struct vhci_hcd	*vhci_hcd = hcd_to_vhci_hcd(hcd);
+	struct vhci *vhci = vhci_hcd->vhci;
+	int		retval = DIV_ROUND_UP(VHCI_HC_PORTS + 1, 8);
+	int		rhport;
+	int		changed = 0;
+	unsigned long	flags;
+
+	memset(buf, 0, retval);
+
+	spin_lock_irqsave(&vhci->lock, flags);
+	if (!HCD_HW_ACCESSIBLE(hcd)) {
+		usbip_dbg_vhci_rh("hw accessible flag not on?\n");
+		goto done;
+	}
+
+	/* check pseudo status register for each port */
+	for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
+		if ((vhci_hcd->port_status[rhport] & PORT_C_MASK)) {
+			/* The status of a port has been changed, */
+			usbip_dbg_vhci_rh("port %d status changed\n", rhport);
+
+			buf[(rhport + 1) / 8] |= 1 << (rhport + 1) % 8;
+			changed = 1;
+		}
+	}
+
+	if ((hcd->state == HC_STATE_SUSPENDED) && (changed == 1))
+		usb_hcd_resume_root_hub(hcd);
+
+done:
+	spin_unlock_irqrestore(&vhci->lock, flags);
+	return changed ? retval : 0;
+}
+
+/* usb 3.0 root hub device descriptor */
+static struct {
+	struct usb_bos_descriptor bos;
+	struct usb_ss_cap_descriptor ss_cap;
+} __packed usb3_bos_desc = {
+
+	.bos = {
+		.bLength		= USB_DT_BOS_SIZE,
+		.bDescriptorType	= USB_DT_BOS,
+		.wTotalLength		= cpu_to_le16(sizeof(usb3_bos_desc)),
+		.bNumDeviceCaps		= 1,
+	},
+	.ss_cap = {
+		.bLength		= USB_DT_USB_SS_CAP_SIZE,
+		.bDescriptorType	= USB_DT_DEVICE_CAPABILITY,
+		.bDevCapabilityType	= USB_SS_CAP_TYPE,
+		.wSpeedSupported	= cpu_to_le16(USB_5GBPS_OPERATION),
+		.bFunctionalitySupport	= ilog2(USB_5GBPS_OPERATION),
+	},
+};
+
+static inline void
+ss_hub_descriptor(struct usb_hub_descriptor *desc)
+{
+	memset(desc, 0, sizeof *desc);
+	desc->bDescriptorType = USB_DT_SS_HUB;
+	desc->bDescLength = 12;
+	desc->wHubCharacteristics = cpu_to_le16(
+		HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
+	desc->bNbrPorts = VHCI_HC_PORTS;
+	desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/
+	desc->u.ss.DeviceRemovable = 0xffff;
+}
+
+static inline void hub_descriptor(struct usb_hub_descriptor *desc)
+{
+	int width;
+
+	memset(desc, 0, sizeof(*desc));
+	desc->bDescriptorType = USB_DT_HUB;
+	desc->wHubCharacteristics = cpu_to_le16(
+		HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
+
+	desc->bNbrPorts = VHCI_HC_PORTS;
+	BUILD_BUG_ON(VHCI_HC_PORTS > USB_MAXCHILDREN);
+	width = desc->bNbrPorts / 8 + 1;
+	desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * width;
+	memset(&desc->u.hs.DeviceRemovable[0], 0, width);
+	memset(&desc->u.hs.DeviceRemovable[width], 0xff, width);
+}
+
+static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+			    u16 wIndex, char *buf, u16 wLength)
+{
+	struct vhci_hcd	*vhci_hcd;
+	struct vhci	*vhci;
+	int             retval = 0;
+	int		rhport = -1;
+	unsigned long	flags;
+	bool invalid_rhport = false;
+
+	u32 prev_port_status[VHCI_HC_PORTS];
+
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		return -ETIMEDOUT;
+
+	/*
+	 * NOTE:
+	 * wIndex (bits 0-7) shows the port number and begins from 1?
+	 */
+	wIndex = ((__u8)(wIndex & 0x00ff));
+	usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue,
+			  wIndex);
+
+	/*
+	 * wIndex can be 0 for some request types (typeReq). rhport is
+	 * in valid range when wIndex >= 1 and < VHCI_HC_PORTS.
+	 *
+	 * Reference port_status[] only with valid rhport when
+	 * invalid_rhport is false.
+	 */
+	if (wIndex < 1 || wIndex > VHCI_HC_PORTS) {
+		invalid_rhport = true;
+		if (wIndex > VHCI_HC_PORTS)
+			pr_err("invalid port number %d\n", wIndex);
+	} else
+		rhport = wIndex - 1;
+
+	vhci_hcd = hcd_to_vhci_hcd(hcd);
+	vhci = vhci_hcd->vhci;
+
+	spin_lock_irqsave(&vhci->lock, flags);
+
+	/* store old status and compare now and old later */
+	if (usbip_dbg_flag_vhci_rh) {
+		if (!invalid_rhport)
+			memcpy(prev_port_status, vhci_hcd->port_status,
+				sizeof(prev_port_status));
+	}
+
+	switch (typeReq) {
+	case ClearHubFeature:
+		usbip_dbg_vhci_rh(" ClearHubFeature\n");
+		break;
+	case ClearPortFeature:
+		if (invalid_rhport) {
+			pr_err("invalid port number %d\n", wIndex);
+			goto error;
+		}
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			if (hcd->speed == HCD_USB3) {
+				pr_err(" ClearPortFeature: USB_PORT_FEAT_SUSPEND req not "
+				       "supported for USB 3.0 roothub\n");
+				goto error;
+			}
+			usbip_dbg_vhci_rh(
+				" ClearPortFeature: USB_PORT_FEAT_SUSPEND\n");
+			if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_SUSPEND) {
+				/* 20msec signaling */
+				vhci_hcd->resuming = 1;
+				vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(20);
+			}
+			break;
+		case USB_PORT_FEAT_POWER:
+			usbip_dbg_vhci_rh(
+				" ClearPortFeature: USB_PORT_FEAT_POWER\n");
+			if (hcd->speed == HCD_USB3)
+				vhci_hcd->port_status[rhport] &= ~USB_SS_PORT_STAT_POWER;
+			else
+				vhci_hcd->port_status[rhport] &= ~USB_PORT_STAT_POWER;
+			break;
+		default:
+			usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
+					  wValue);
+			if (wValue >= 32)
+				goto error;
+			vhci_hcd->port_status[rhport] &= ~(1 << wValue);
+			break;
+		}
+		break;
+	case GetHubDescriptor:
+		usbip_dbg_vhci_rh(" GetHubDescriptor\n");
+		if (hcd->speed == HCD_USB3 &&
+				(wLength < USB_DT_SS_HUB_SIZE ||
+				 wValue != (USB_DT_SS_HUB << 8))) {
+			pr_err("Wrong hub descriptor type for USB 3.0 roothub.\n");
+			goto error;
+		}
+		if (hcd->speed == HCD_USB3)
+			ss_hub_descriptor((struct usb_hub_descriptor *) buf);
+		else
+			hub_descriptor((struct usb_hub_descriptor *) buf);
+		break;
+	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+		if (hcd->speed != HCD_USB3)
+			goto error;
+
+		if ((wValue >> 8) != USB_DT_BOS)
+			goto error;
+
+		memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc));
+		retval = sizeof(usb3_bos_desc);
+		break;
+	case GetHubStatus:
+		usbip_dbg_vhci_rh(" GetHubStatus\n");
+		*(__le32 *) buf = cpu_to_le32(0);
+		break;
+	case GetPortStatus:
+		usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex);
+		if (invalid_rhport) {
+			pr_err("invalid port number %d\n", wIndex);
+			retval = -EPIPE;
+			goto error;
+		}
+
+		/* we do not care about resume. */
+
+		/* whoever resets or resumes must GetPortStatus to
+		 * complete it!!
+		 */
+		if (vhci_hcd->resuming && time_after(jiffies, vhci_hcd->re_timeout)) {
+			vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_SUSPEND);
+			vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_SUSPEND);
+			vhci_hcd->resuming = 0;
+			vhci_hcd->re_timeout = 0;
+		}
+
+		if ((vhci_hcd->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) !=
+		    0 && time_after(jiffies, vhci_hcd->re_timeout)) {
+			vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_RESET);
+			vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_RESET);
+			vhci_hcd->re_timeout = 0;
+
+			/*
+			 * A few drivers do usb reset during probe when
+			 * the device could be in VDEV_ST_USED state
+			 */
+			if (vhci_hcd->vdev[rhport].ud.status ==
+				VDEV_ST_NOTASSIGNED ||
+			    vhci_hcd->vdev[rhport].ud.status ==
+				VDEV_ST_USED) {
+				usbip_dbg_vhci_rh(
+					" enable rhport %d (status %u)\n",
+					rhport,
+					vhci_hcd->vdev[rhport].ud.status);
+				vhci_hcd->port_status[rhport] |=
+					USB_PORT_STAT_ENABLE;
+			}
+
+			if (hcd->speed < HCD_USB3) {
+				switch (vhci_hcd->vdev[rhport].speed) {
+				case USB_SPEED_HIGH:
+					vhci_hcd->port_status[rhport] |=
+					      USB_PORT_STAT_HIGH_SPEED;
+					break;
+				case USB_SPEED_LOW:
+					vhci_hcd->port_status[rhport] |=
+						USB_PORT_STAT_LOW_SPEED;
+					break;
+				default:
+					pr_err("vhci_device speed not set\n");
+					break;
+				}
+			}
+		}
+		((__le16 *) buf)[0] = cpu_to_le16(vhci_hcd->port_status[rhport]);
+		((__le16 *) buf)[1] =
+			cpu_to_le16(vhci_hcd->port_status[rhport] >> 16);
+
+		usbip_dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0],
+				  ((u16 *)buf)[1]);
+		break;
+	case SetHubFeature:
+		usbip_dbg_vhci_rh(" SetHubFeature\n");
+		retval = -EPIPE;
+		break;
+	case SetPortFeature:
+		switch (wValue) {
+		case USB_PORT_FEAT_LINK_STATE:
+			usbip_dbg_vhci_rh(
+				" SetPortFeature: USB_PORT_FEAT_LINK_STATE\n");
+			if (hcd->speed != HCD_USB3) {
+				pr_err("USB_PORT_FEAT_LINK_STATE req not "
+				       "supported for USB 2.0 roothub\n");
+				goto error;
+			}
+			/*
+			 * Since this is dummy we don't have an actual link so
+			 * there is nothing to do for the SET_LINK_STATE cmd
+			 */
+			break;
+		case USB_PORT_FEAT_U1_TIMEOUT:
+			usbip_dbg_vhci_rh(
+				" SetPortFeature: USB_PORT_FEAT_U1_TIMEOUT\n");
+			fallthrough;
+		case USB_PORT_FEAT_U2_TIMEOUT:
+			usbip_dbg_vhci_rh(
+				" SetPortFeature: USB_PORT_FEAT_U2_TIMEOUT\n");
+			/* TODO: add suspend/resume support! */
+			if (hcd->speed != HCD_USB3) {
+				pr_err("USB_PORT_FEAT_U1/2_TIMEOUT req not "
+				       "supported for USB 2.0 roothub\n");
+				goto error;
+			}
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			usbip_dbg_vhci_rh(
+				" SetPortFeature: USB_PORT_FEAT_SUSPEND\n");
+			/* Applicable only for USB2.0 hub */
+			if (hcd->speed == HCD_USB3) {
+				pr_err("USB_PORT_FEAT_SUSPEND req not "
+				       "supported for USB 3.0 roothub\n");
+				goto error;
+			}
+
+			if (invalid_rhport) {
+				pr_err("invalid port number %d\n", wIndex);
+				goto error;
+			}
+
+			vhci_hcd->port_status[rhport] |= USB_PORT_STAT_SUSPEND;
+			break;
+		case USB_PORT_FEAT_POWER:
+			usbip_dbg_vhci_rh(
+				" SetPortFeature: USB_PORT_FEAT_POWER\n");
+			if (invalid_rhport) {
+				pr_err("invalid port number %d\n", wIndex);
+				goto error;
+			}
+			if (hcd->speed == HCD_USB3)
+				vhci_hcd->port_status[rhport] |= USB_SS_PORT_STAT_POWER;
+			else
+				vhci_hcd->port_status[rhport] |= USB_PORT_STAT_POWER;
+			break;
+		case USB_PORT_FEAT_BH_PORT_RESET:
+			usbip_dbg_vhci_rh(
+				" SetPortFeature: USB_PORT_FEAT_BH_PORT_RESET\n");
+			if (invalid_rhport) {
+				pr_err("invalid port number %d\n", wIndex);
+				goto error;
+			}
+			/* Applicable only for USB3.0 hub */
+			if (hcd->speed != HCD_USB3) {
+				pr_err("USB_PORT_FEAT_BH_PORT_RESET req not "
+				       "supported for USB 2.0 roothub\n");
+				goto error;
+			}
+			fallthrough;
+		case USB_PORT_FEAT_RESET:
+			usbip_dbg_vhci_rh(
+				" SetPortFeature: USB_PORT_FEAT_RESET\n");
+			if (invalid_rhport) {
+				pr_err("invalid port number %d\n", wIndex);
+				goto error;
+			}
+			/* if it's already enabled, disable */
+			if (hcd->speed == HCD_USB3) {
+				vhci_hcd->port_status[rhport] = 0;
+				vhci_hcd->port_status[rhport] =
+					(USB_SS_PORT_STAT_POWER |
+					 USB_PORT_STAT_CONNECTION |
+					 USB_PORT_STAT_RESET);
+			} else if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_ENABLE) {
+				vhci_hcd->port_status[rhport] &= ~(USB_PORT_STAT_ENABLE
+					| USB_PORT_STAT_LOW_SPEED
+					| USB_PORT_STAT_HIGH_SPEED);
+			}
+
+			/* 50msec reset signaling */
+			vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
+			fallthrough;
+		default:
+			usbip_dbg_vhci_rh(" SetPortFeature: default %d\n",
+					  wValue);
+			if (invalid_rhport) {
+				pr_err("invalid port number %d\n", wIndex);
+				goto error;
+			}
+			if (wValue >= 32)
+				goto error;
+			if (hcd->speed == HCD_USB3) {
+				if ((vhci_hcd->port_status[rhport] &
+				     USB_SS_PORT_STAT_POWER) != 0) {
+					vhci_hcd->port_status[rhport] |= (1 << wValue);
+				}
+			} else
+				if ((vhci_hcd->port_status[rhport] &
+				     USB_PORT_STAT_POWER) != 0) {
+					vhci_hcd->port_status[rhport] |= (1 << wValue);
+				}
+		}
+		break;
+	case GetPortErrorCount:
+		usbip_dbg_vhci_rh(" GetPortErrorCount\n");
+		if (hcd->speed != HCD_USB3) {
+			pr_err("GetPortErrorCount req not "
+			       "supported for USB 2.0 roothub\n");
+			goto error;
+		}
+		/* We'll always return 0 since this is a dummy hub */
+		*(__le32 *) buf = cpu_to_le32(0);
+		break;
+	case SetHubDepth:
+		usbip_dbg_vhci_rh(" SetHubDepth\n");
+		if (hcd->speed != HCD_USB3) {
+			pr_err("SetHubDepth req not supported for "
+			       "USB 2.0 roothub\n");
+			goto error;
+		}
+		break;
+	default:
+		pr_err("default hub control req: %04x v%04x i%04x l%d\n",
+			typeReq, wValue, wIndex, wLength);
+error:
+		/* "protocol stall" on error */
+		retval = -EPIPE;
+	}
+
+	if (usbip_dbg_flag_vhci_rh) {
+		pr_debug("port %d\n", rhport);
+		/* Only dump valid port status */
+		if (!invalid_rhport) {
+			dump_port_status_diff(prev_port_status[rhport],
+					      vhci_hcd->port_status[rhport],
+					      hcd->speed == HCD_USB3);
+		}
+	}
+	usbip_dbg_vhci_rh(" bye\n");
+
+	spin_unlock_irqrestore(&vhci->lock, flags);
+
+	if (!invalid_rhport &&
+	    (vhci_hcd->port_status[rhport] & PORT_C_MASK) != 0) {
+		usb_hcd_poll_rh_status(hcd);
+	}
+
+	return retval;
+}
+
+static void vhci_tx_urb(struct urb *urb, struct vhci_device *vdev)
+{
+	struct vhci_priv *priv;
+	struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
+	unsigned long flags;
+
+	priv = kzalloc(sizeof(struct vhci_priv), GFP_ATOMIC);
+	if (!priv) {
+		usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
+		return;
+	}
+
+	spin_lock_irqsave(&vdev->priv_lock, flags);
+
+	priv->seqnum = atomic_inc_return(&vhci_hcd->seqnum);
+	if (priv->seqnum == 0xffff)
+		dev_info(&urb->dev->dev, "seqnum max\n");
+
+	priv->vdev = vdev;
+	priv->urb = urb;
+
+	urb->hcpriv = (void *) priv;
+
+	list_add_tail(&priv->list, &vdev->priv_tx);
+
+	wake_up(&vdev->waitq_tx);
+	spin_unlock_irqrestore(&vdev->priv_lock, flags);
+}
+
+static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
+{
+	struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
+	struct vhci *vhci = vhci_hcd->vhci;
+	struct device *dev = &urb->dev->dev;
+	u8 portnum = urb->dev->portnum;
+	int ret = 0;
+	struct vhci_device *vdev;
+	unsigned long flags;
+
+	if (portnum > VHCI_HC_PORTS) {
+		pr_err("invalid port number %d\n", portnum);
+		return -ENODEV;
+	}
+	vdev = &vhci_hcd->vdev[portnum-1];
+
+	if (!urb->transfer_buffer && !urb->num_sgs &&
+	     urb->transfer_buffer_length) {
+		dev_dbg(dev, "Null URB transfer buffer\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&vhci->lock, flags);
+
+	if (urb->status != -EINPROGRESS) {
+		dev_err(dev, "URB already unlinked!, status %d\n", urb->status);
+		spin_unlock_irqrestore(&vhci->lock, flags);
+		return urb->status;
+	}
+
+	/* refuse enqueue for dead connection */
+	spin_lock(&vdev->ud.lock);
+	if (vdev->ud.status == VDEV_ST_NULL ||
+	    vdev->ud.status == VDEV_ST_ERROR) {
+		dev_err(dev, "enqueue for inactive port %d\n", vdev->rhport);
+		spin_unlock(&vdev->ud.lock);
+		spin_unlock_irqrestore(&vhci->lock, flags);
+		return -ENODEV;
+	}
+	spin_unlock(&vdev->ud.lock);
+
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret)
+		goto no_need_unlink;
+
+	/*
+	 * The enumeration process is as follows;
+	 *
+	 *  1. Get_Descriptor request to DevAddrs(0) EndPoint(0)
+	 *     to get max packet length of default pipe
+	 *
+	 *  2. Set_Address request to DevAddr(0) EndPoint(0)
+	 *
+	 */
+	if (usb_pipedevice(urb->pipe) == 0) {
+		__u8 type = usb_pipetype(urb->pipe);
+		struct usb_ctrlrequest *ctrlreq =
+			(struct usb_ctrlrequest *) urb->setup_packet;
+
+		if (type != PIPE_CONTROL || !ctrlreq) {
+			dev_err(dev, "invalid request to devnum 0\n");
+			ret = -EINVAL;
+			goto no_need_xmit;
+		}
+
+		switch (ctrlreq->bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			/* set_address may come when a device is reset */
+			dev_info(dev, "SetAddress Request (%d) to port %d\n",
+				 ctrlreq->wValue, vdev->rhport);
+
+			usb_put_dev(vdev->udev);
+			vdev->udev = usb_get_dev(urb->dev);
+
+			spin_lock(&vdev->ud.lock);
+			vdev->ud.status = VDEV_ST_USED;
+			spin_unlock(&vdev->ud.lock);
+
+			if (urb->status == -EINPROGRESS) {
+				/* This request is successfully completed. */
+				/* If not -EINPROGRESS, possibly unlinked. */
+				urb->status = 0;
+			}
+
+			goto no_need_xmit;
+
+		case USB_REQ_GET_DESCRIPTOR:
+			if (ctrlreq->wValue == cpu_to_le16(USB_DT_DEVICE << 8))
+				usbip_dbg_vhci_hc(
+					"Not yet?:Get_Descriptor to device 0 (get max pipe size)\n");
+
+			usb_put_dev(vdev->udev);
+			vdev->udev = usb_get_dev(urb->dev);
+			goto out;
+
+		default:
+			/* NOT REACHED */
+			dev_err(dev,
+				"invalid request to devnum 0 bRequest %u, wValue %u\n",
+				ctrlreq->bRequest,
+				ctrlreq->wValue);
+			ret =  -EINVAL;
+			goto no_need_xmit;
+		}
+
+	}
+
+out:
+	vhci_tx_urb(urb, vdev);
+	spin_unlock_irqrestore(&vhci->lock, flags);
+
+	return 0;
+
+no_need_xmit:
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+no_need_unlink:
+	spin_unlock_irqrestore(&vhci->lock, flags);
+	if (!ret) {
+		/* usb_hcd_giveback_urb() should be called with
+		 * irqs disabled
+		 */
+		local_irq_disable();
+		usb_hcd_giveback_urb(hcd, urb, urb->status);
+		local_irq_enable();
+	}
+	return ret;
+}
+
+/*
+ * vhci_rx gives back the urb after receiving the reply of the urb.  If an
+ * unlink pdu is sent or not, vhci_rx receives a normal return pdu and gives
+ * back its urb. For the driver unlinking the urb, the content of the urb is
+ * not important, but the calling to its completion handler is important; the
+ * completion of unlinking is notified by the completion handler.
+ *
+ *
+ * CLIENT SIDE
+ *
+ * - When vhci_hcd receives RET_SUBMIT,
+ *
+ *	- case 1a). the urb of the pdu is not unlinking.
+ *		- normal case
+ *		=> just give back the urb
+ *
+ *	- case 1b). the urb of the pdu is unlinking.
+ *		- usbip.ko will return a reply of the unlinking request.
+ *		=> give back the urb now and go to case 2b).
+ *
+ * - When vhci_hcd receives RET_UNLINK,
+ *
+ *	- case 2a). a submit request is still pending in vhci_hcd.
+ *		- urb was really pending in usbip.ko and urb_unlink_urb() was
+ *		  completed there.
+ *		=> free a pending submit request
+ *		=> notify unlink completeness by giving back the urb
+ *
+ *	- case 2b). a submit request is *not* pending in vhci_hcd.
+ *		- urb was already given back to the core driver.
+ *		=> do not give back the urb
+ *
+ *
+ * SERVER SIDE
+ *
+ * - When usbip receives CMD_UNLINK,
+ *
+ *	- case 3a). the urb of the unlink request is now in submission.
+ *		=> do usb_unlink_urb().
+ *		=> after the unlink is completed, send RET_UNLINK.
+ *
+ *	- case 3b). the urb of the unlink request is not in submission.
+ *		- may be already completed or never be received
+ *		=> send RET_UNLINK
+ *
+ */
+static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
+	struct vhci *vhci = vhci_hcd->vhci;
+	struct vhci_priv *priv;
+	struct vhci_device *vdev;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vhci->lock, flags);
+
+	priv = urb->hcpriv;
+	if (!priv) {
+		/* URB was never linked! or will be soon given back by
+		 * vhci_rx. */
+		spin_unlock_irqrestore(&vhci->lock, flags);
+		return -EIDRM;
+	}
+
+	{
+		int ret = 0;
+
+		ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+		if (ret) {
+			spin_unlock_irqrestore(&vhci->lock, flags);
+			return ret;
+		}
+	}
+
+	 /* send unlink request here? */
+	vdev = priv->vdev;
+
+	if (!vdev->ud.tcp_socket) {
+		/* tcp connection is closed */
+		spin_lock(&vdev->priv_lock);
+
+		list_del(&priv->list);
+		kfree(priv);
+		urb->hcpriv = NULL;
+
+		spin_unlock(&vdev->priv_lock);
+
+		/*
+		 * If tcp connection is alive, we have sent CMD_UNLINK.
+		 * vhci_rx will receive RET_UNLINK and give back the URB.
+		 * Otherwise, we give back it here.
+		 */
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+		spin_unlock_irqrestore(&vhci->lock, flags);
+		usb_hcd_giveback_urb(hcd, urb, urb->status);
+		spin_lock_irqsave(&vhci->lock, flags);
+
+	} else {
+		/* tcp connection is alive */
+		struct vhci_unlink *unlink;
+
+		spin_lock(&vdev->priv_lock);
+
+		/* setup CMD_UNLINK pdu */
+		unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC);
+		if (!unlink) {
+			spin_unlock(&vdev->priv_lock);
+			spin_unlock_irqrestore(&vhci->lock, flags);
+			usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
+			return -ENOMEM;
+		}
+
+		unlink->seqnum = atomic_inc_return(&vhci_hcd->seqnum);
+		if (unlink->seqnum == 0xffff)
+			pr_info("seqnum max\n");
+
+		unlink->unlink_seqnum = priv->seqnum;
+
+		/* send cmd_unlink and try to cancel the pending URB in the
+		 * peer */
+		list_add_tail(&unlink->list, &vdev->unlink_tx);
+		wake_up(&vdev->waitq_tx);
+
+		spin_unlock(&vdev->priv_lock);
+	}
+
+	spin_unlock_irqrestore(&vhci->lock, flags);
+
+	usbip_dbg_vhci_hc("leave\n");
+	return 0;
+}
+
+static void vhci_cleanup_unlink_list(struct vhci_device *vdev,
+		struct list_head *unlink_list)
+{
+	struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
+	struct usb_hcd *hcd = vhci_hcd_to_hcd(vhci_hcd);
+	struct vhci *vhci = vhci_hcd->vhci;
+	struct vhci_unlink *unlink, *tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vhci->lock, flags);
+	spin_lock(&vdev->priv_lock);
+
+	list_for_each_entry_safe(unlink, tmp, unlink_list, list) {
+		struct urb *urb;
+
+		urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum);
+		if (!urb) {
+			list_del(&unlink->list);
+			kfree(unlink);
+			continue;
+		}
+
+		urb->status = -ENODEV;
+
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+		list_del(&unlink->list);
+
+		spin_unlock(&vdev->priv_lock);
+		spin_unlock_irqrestore(&vhci->lock, flags);
+
+		usb_hcd_giveback_urb(hcd, urb, urb->status);
+
+		spin_lock_irqsave(&vhci->lock, flags);
+		spin_lock(&vdev->priv_lock);
+
+		kfree(unlink);
+	}
+
+	spin_unlock(&vdev->priv_lock);
+	spin_unlock_irqrestore(&vhci->lock, flags);
+}
+
+static void vhci_device_unlink_cleanup(struct vhci_device *vdev)
+{
+	/* give back URB of unsent unlink request */
+	vhci_cleanup_unlink_list(vdev, &vdev->unlink_tx);
+
+	/* give back URB of unanswered unlink request */
+	vhci_cleanup_unlink_list(vdev, &vdev->unlink_rx);
+}
+
+/*
+ * The important thing is that only one context begins cleanup.
+ * This is why error handling and cleanup become simple.
+ * We do not want to consider race condition as possible.
+ */
+static void vhci_shutdown_connection(struct usbip_device *ud)
+{
+	struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
+
+	/* need this? see stub_dev.c */
+	if (ud->tcp_socket) {
+		pr_debug("shutdown tcp_socket %d\n", ud->sockfd);
+		kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR);
+	}
+
+	/* kill threads related to this sdev */
+	if (vdev->ud.tcp_rx) {
+		kthread_stop_put(vdev->ud.tcp_rx);
+		vdev->ud.tcp_rx = NULL;
+	}
+	if (vdev->ud.tcp_tx) {
+		kthread_stop_put(vdev->ud.tcp_tx);
+		vdev->ud.tcp_tx = NULL;
+	}
+	pr_info("stop threads\n");
+
+	/* active connection is closed */
+	if (vdev->ud.tcp_socket) {
+		sockfd_put(vdev->ud.tcp_socket);
+		vdev->ud.tcp_socket = NULL;
+		vdev->ud.sockfd = -1;
+	}
+	pr_info("release socket\n");
+
+	vhci_device_unlink_cleanup(vdev);
+
+	/*
+	 * rh_port_disconnect() is a trigger of ...
+	 *   usb_disable_device():
+	 *	disable all the endpoints for a USB device.
+	 *   usb_disable_endpoint():
+	 *	disable endpoints. pending urbs are unlinked(dequeued).
+	 *
+	 * NOTE: After calling rh_port_disconnect(), the USB device drivers of a
+	 * detached device should release used urbs in a cleanup function (i.e.
+	 * xxx_disconnect()). Therefore, vhci_hcd does not need to release
+	 * pushed urbs and their private data in this function.
+	 *
+	 * NOTE: vhci_dequeue() must be considered carefully. When shutting down
+	 * a connection, vhci_shutdown_connection() expects vhci_dequeue()
+	 * gives back pushed urbs and frees their private data by request of
+	 * the cleanup function of a USB driver. When unlinking a urb with an
+	 * active connection, vhci_dequeue() does not give back the urb which
+	 * is actually given back by vhci_rx after receiving its return pdu.
+	 *
+	 */
+	rh_port_disconnect(vdev);
+
+	pr_info("disconnect device\n");
+}
+
+static void vhci_device_reset(struct usbip_device *ud)
+{
+	struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ud->lock, flags);
+
+	vdev->speed  = 0;
+	vdev->devid  = 0;
+
+	usb_put_dev(vdev->udev);
+	vdev->udev = NULL;
+
+	if (ud->tcp_socket) {
+		sockfd_put(ud->tcp_socket);
+		ud->tcp_socket = NULL;
+		ud->sockfd = -1;
+	}
+	ud->status = VDEV_ST_NULL;
+
+	spin_unlock_irqrestore(&ud->lock, flags);
+}
+
+static void vhci_device_unusable(struct usbip_device *ud)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ud->lock, flags);
+	ud->status = VDEV_ST_ERROR;
+	spin_unlock_irqrestore(&ud->lock, flags);
+}
+
+static void vhci_device_init(struct vhci_device *vdev)
+{
+	memset(vdev, 0, sizeof(struct vhci_device));
+
+	vdev->ud.side   = USBIP_VHCI;
+	vdev->ud.status = VDEV_ST_NULL;
+	spin_lock_init(&vdev->ud.lock);
+	mutex_init(&vdev->ud.sysfs_lock);
+
+	INIT_LIST_HEAD(&vdev->priv_rx);
+	INIT_LIST_HEAD(&vdev->priv_tx);
+	INIT_LIST_HEAD(&vdev->unlink_tx);
+	INIT_LIST_HEAD(&vdev->unlink_rx);
+	spin_lock_init(&vdev->priv_lock);
+
+	init_waitqueue_head(&vdev->waitq_tx);
+
+	vdev->ud.eh_ops.shutdown = vhci_shutdown_connection;
+	vdev->ud.eh_ops.reset = vhci_device_reset;
+	vdev->ud.eh_ops.unusable = vhci_device_unusable;
+
+	usbip_start_eh(&vdev->ud);
+}
+
+static int hcd_name_to_id(const char *name)
+{
+	char *c;
+	long val;
+	int ret;
+
+	c = strchr(name, '.');
+	if (c == NULL)
+		return 0;
+
+	ret = kstrtol(c+1, 10, &val);
+	if (ret < 0)
+		return ret;
+
+	return val;
+}
+
+static int vhci_setup(struct usb_hcd *hcd)
+{
+	struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller));
+	if (usb_hcd_is_primary_hcd(hcd)) {
+		vhci->vhci_hcd_hs = hcd_to_vhci_hcd(hcd);
+		vhci->vhci_hcd_hs->vhci = vhci;
+		/*
+		 * Mark the first roothub as being USB 2.0.
+		 * The USB 3.0 roothub will be registered later by
+		 * vhci_hcd_probe()
+		 */
+		hcd->speed = HCD_USB2;
+		hcd->self.root_hub->speed = USB_SPEED_HIGH;
+	} else {
+		vhci->vhci_hcd_ss = hcd_to_vhci_hcd(hcd);
+		vhci->vhci_hcd_ss->vhci = vhci;
+		hcd->speed = HCD_USB3;
+		hcd->self.root_hub->speed = USB_SPEED_SUPER;
+	}
+
+	/*
+	 * Support SG.
+	 * sg_tablesize is an arbitrary value to alleviate memory pressure
+	 * on the host.
+	 */
+	hcd->self.sg_tablesize = 32;
+	hcd->self.no_sg_constraint = 1;
+
+	return 0;
+}
+
+static int vhci_start(struct usb_hcd *hcd)
+{
+	struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
+	int id, rhport;
+	int err;
+
+	usbip_dbg_vhci_hc("enter vhci_start\n");
+
+	if (usb_hcd_is_primary_hcd(hcd))
+		spin_lock_init(&vhci_hcd->vhci->lock);
+
+	/* initialize private data of usb_hcd */
+
+	for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
+		struct vhci_device *vdev = &vhci_hcd->vdev[rhport];
+
+		vhci_device_init(vdev);
+		vdev->rhport = rhport;
+	}
+
+	atomic_set(&vhci_hcd->seqnum, 0);
+
+	hcd->power_budget = 0; /* no limit */
+	hcd->uses_new_polling = 1;
+
+#ifdef CONFIG_USB_OTG
+	hcd->self.otg_port = 1;
+#endif
+
+	id = hcd_name_to_id(hcd_name(hcd));
+	if (id < 0) {
+		pr_err("invalid vhci name %s\n", hcd_name(hcd));
+		return -EINVAL;
+	}
+
+	/* vhci_hcd is now ready to be controlled through sysfs */
+	if (id == 0 && usb_hcd_is_primary_hcd(hcd)) {
+		err = vhci_init_attr_group();
+		if (err) {
+			dev_err(hcd_dev(hcd), "init attr group failed, err = %d\n", err);
+			return err;
+		}
+		err = sysfs_create_group(&hcd_dev(hcd)->kobj, &vhci_attr_group);
+		if (err) {
+			dev_err(hcd_dev(hcd), "create sysfs files failed, err = %d\n", err);
+			vhci_finish_attr_group();
+			return err;
+		}
+		pr_info("created sysfs %s\n", hcd_name(hcd));
+	}
+
+	return 0;
+}
+
+static void vhci_stop(struct usb_hcd *hcd)
+{
+	struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
+	int id, rhport;
+
+	usbip_dbg_vhci_hc("stop VHCI controller\n");
+
+	/* 1. remove the userland interface of vhci_hcd */
+	id = hcd_name_to_id(hcd_name(hcd));
+	if (id == 0 && usb_hcd_is_primary_hcd(hcd)) {
+		sysfs_remove_group(&hcd_dev(hcd)->kobj, &vhci_attr_group);
+		vhci_finish_attr_group();
+	}
+
+	/* 2. shutdown all the ports of vhci_hcd */
+	for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
+		struct vhci_device *vdev = &vhci_hcd->vdev[rhport];
+
+		usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED);
+		usbip_stop_eh(&vdev->ud);
+	}
+}
+
+static int vhci_get_frame_number(struct usb_hcd *hcd)
+{
+	dev_err_ratelimited(&hcd->self.root_hub->dev, "Not yet implemented\n");
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+/* FIXME: suspend/resume */
+static int vhci_bus_suspend(struct usb_hcd *hcd)
+{
+	struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller));
+	unsigned long flags;
+
+	dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
+
+	spin_lock_irqsave(&vhci->lock, flags);
+	hcd->state = HC_STATE_SUSPENDED;
+	spin_unlock_irqrestore(&vhci->lock, flags);
+
+	return 0;
+}
+
+static int vhci_bus_resume(struct usb_hcd *hcd)
+{
+	struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller));
+	int rc = 0;
+	unsigned long flags;
+
+	dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
+
+	spin_lock_irqsave(&vhci->lock, flags);
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		rc = -ESHUTDOWN;
+	else
+		hcd->state = HC_STATE_RUNNING;
+	spin_unlock_irqrestore(&vhci->lock, flags);
+
+	return rc;
+}
+
+#else
+
+#define vhci_bus_suspend      NULL
+#define vhci_bus_resume       NULL
+#endif
+
+/* Change a group of bulk endpoints to support multiple stream IDs */
+static int vhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
+	struct usb_host_endpoint **eps, unsigned int num_eps,
+	unsigned int num_streams, gfp_t mem_flags)
+{
+	dev_dbg(&hcd->self.root_hub->dev, "vhci_alloc_streams not implemented\n");
+	return 0;
+}
+
+/* Reverts a group of bulk endpoints back to not using stream IDs. */
+static int vhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
+	struct usb_host_endpoint **eps, unsigned int num_eps,
+	gfp_t mem_flags)
+{
+	dev_dbg(&hcd->self.root_hub->dev, "vhci_free_streams not implemented\n");
+	return 0;
+}
+
+static const struct hc_driver vhci_hc_driver = {
+	.description	= driver_name,
+	.product_desc	= driver_desc,
+	.hcd_priv_size	= sizeof(struct vhci_hcd),
+
+	.flags		= HCD_USB3 | HCD_SHARED,
+
+	.reset		= vhci_setup,
+	.start		= vhci_start,
+	.stop		= vhci_stop,
+
+	.urb_enqueue	= vhci_urb_enqueue,
+	.urb_dequeue	= vhci_urb_dequeue,
+
+	.get_frame_number = vhci_get_frame_number,
+
+	.hub_status_data = vhci_hub_status,
+	.hub_control    = vhci_hub_control,
+	.bus_suspend	= vhci_bus_suspend,
+	.bus_resume	= vhci_bus_resume,
+
+	.alloc_streams	= vhci_alloc_streams,
+	.free_streams	= vhci_free_streams,
+};
+
+static int vhci_hcd_probe(struct platform_device *pdev)
+{
+	struct vhci             *vhci = *((void **)dev_get_platdata(&pdev->dev));
+	struct usb_hcd		*hcd_hs;
+	struct usb_hcd		*hcd_ss;
+	int			ret;
+
+	usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id);
+
+	/*
+	 * Allocate and initialize hcd.
+	 * Our private data is also allocated automatically.
+	 */
+	hcd_hs = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd_hs) {
+		pr_err("create primary hcd failed\n");
+		return -ENOMEM;
+	}
+	hcd_hs->has_tt = 1;
+
+	/*
+	 * Finish generic HCD structure initialization and register.
+	 * Call the driver's reset() and start() routines.
+	 */
+	ret = usb_add_hcd(hcd_hs, 0, 0);
+	if (ret != 0) {
+		pr_err("usb_add_hcd hs failed %d\n", ret);
+		goto put_usb2_hcd;
+	}
+
+	hcd_ss = usb_create_shared_hcd(&vhci_hc_driver, &pdev->dev,
+				       dev_name(&pdev->dev), hcd_hs);
+	if (!hcd_ss) {
+		ret = -ENOMEM;
+		pr_err("create shared hcd failed\n");
+		goto remove_usb2_hcd;
+	}
+
+	ret = usb_add_hcd(hcd_ss, 0, 0);
+	if (ret) {
+		pr_err("usb_add_hcd ss failed %d\n", ret);
+		goto put_usb3_hcd;
+	}
+
+	usbip_dbg_vhci_hc("bye\n");
+	return 0;
+
+put_usb3_hcd:
+	usb_put_hcd(hcd_ss);
+remove_usb2_hcd:
+	usb_remove_hcd(hcd_hs);
+put_usb2_hcd:
+	usb_put_hcd(hcd_hs);
+	vhci->vhci_hcd_hs = NULL;
+	vhci->vhci_hcd_ss = NULL;
+	return ret;
+}
+
+static int vhci_hcd_remove(struct platform_device *pdev)
+{
+	struct vhci *vhci = *((void **)dev_get_platdata(&pdev->dev));
+
+	/*
+	 * Disconnects the root hub,
+	 * then reverses the effects of usb_add_hcd(),
+	 * invoking the HCD's stop() methods.
+	 */
+	usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss));
+	usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss));
+
+	usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs));
+	usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs));
+
+	vhci->vhci_hcd_hs = NULL;
+	vhci->vhci_hcd_ss = NULL;
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+/* what should happen for USB/IP under suspend/resume? */
+static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct usb_hcd *hcd;
+	struct vhci *vhci;
+	int rhport;
+	int connected = 0;
+	int ret = 0;
+	unsigned long flags;
+
+	dev_dbg(&pdev->dev, "%s\n", __func__);
+
+	hcd = platform_get_drvdata(pdev);
+	if (!hcd)
+		return 0;
+
+	vhci = *((void **)dev_get_platdata(hcd->self.controller));
+
+	spin_lock_irqsave(&vhci->lock, flags);
+
+	for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
+		if (vhci->vhci_hcd_hs->port_status[rhport] &
+		    USB_PORT_STAT_CONNECTION)
+			connected += 1;
+
+		if (vhci->vhci_hcd_ss->port_status[rhport] &
+		    USB_PORT_STAT_CONNECTION)
+			connected += 1;
+	}
+
+	spin_unlock_irqrestore(&vhci->lock, flags);
+
+	if (connected > 0) {
+		dev_info(&pdev->dev,
+			 "We have %d active connection%s. Do not suspend.\n",
+			 connected, (connected == 1 ? "" : "s"));
+		ret =  -EBUSY;
+	} else {
+		dev_info(&pdev->dev, "suspend vhci_hcd");
+		clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	}
+
+	return ret;
+}
+
+static int vhci_hcd_resume(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+
+	dev_dbg(&pdev->dev, "%s\n", __func__);
+
+	hcd = platform_get_drvdata(pdev);
+	if (!hcd)
+		return 0;
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	usb_hcd_poll_rh_status(hcd);
+
+	return 0;
+}
+
+#else
+
+#define vhci_hcd_suspend	NULL
+#define vhci_hcd_resume		NULL
+
+#endif
+
+static struct platform_driver vhci_driver = {
+	.probe	= vhci_hcd_probe,
+	.remove	= vhci_hcd_remove,
+	.suspend = vhci_hcd_suspend,
+	.resume	= vhci_hcd_resume,
+	.driver	= {
+		.name = driver_name,
+	},
+};
+
+static void del_platform_devices(void)
+{
+	struct platform_device *pdev;
+	int i;
+
+	for (i = 0; i < vhci_num_controllers; i++) {
+		pdev = vhcis[i].pdev;
+		if (pdev != NULL)
+			platform_device_unregister(pdev);
+		vhcis[i].pdev = NULL;
+	}
+	sysfs_remove_link(&platform_bus.kobj, driver_name);
+}
+
+static int __init vhci_hcd_init(void)
+{
+	int i, ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	if (vhci_num_controllers < 1)
+		vhci_num_controllers = 1;
+
+	vhcis = kcalloc(vhci_num_controllers, sizeof(struct vhci), GFP_KERNEL);
+	if (vhcis == NULL)
+		return -ENOMEM;
+
+	for (i = 0; i < vhci_num_controllers; i++) {
+		vhcis[i].pdev = platform_device_alloc(driver_name, i);
+		if (!vhcis[i].pdev) {
+			i--;
+			while (i >= 0)
+				platform_device_put(vhcis[i--].pdev);
+			ret = -ENOMEM;
+			goto err_device_alloc;
+		}
+	}
+	for (i = 0; i < vhci_num_controllers; i++) {
+		void *vhci = &vhcis[i];
+		ret = platform_device_add_data(vhcis[i].pdev, &vhci, sizeof(void *));
+		if (ret)
+			goto err_driver_register;
+	}
+
+	ret = platform_driver_register(&vhci_driver);
+	if (ret)
+		goto err_driver_register;
+
+	for (i = 0; i < vhci_num_controllers; i++) {
+		ret = platform_device_add(vhcis[i].pdev);
+		if (ret < 0) {
+			i--;
+			while (i >= 0)
+				platform_device_del(vhcis[i--].pdev);
+			goto err_add_hcd;
+		}
+	}
+
+	return ret;
+
+err_add_hcd:
+	platform_driver_unregister(&vhci_driver);
+err_driver_register:
+	for (i = 0; i < vhci_num_controllers; i++)
+		platform_device_put(vhcis[i].pdev);
+err_device_alloc:
+	kfree(vhcis);
+	return ret;
+}
+
+static void __exit vhci_hcd_exit(void)
+{
+	del_platform_devices();
+	platform_driver_unregister(&vhci_driver);
+	kfree(vhcis);
+}
+
+module_init(vhci_hcd_init);
+module_exit(vhci_hcd_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/usbip/vhci_rx.c b/drivers/usb/usbip/vhci_rx.c
new file mode 100644
index 000000000..7f2d1c241
--- /dev/null
+++ b/drivers/usb/usbip/vhci_rx.c
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ */
+
+#include <linux/kthread.h>
+#include <linux/slab.h>
+
+#include "usbip_common.h"
+#include "vhci.h"
+
+/* get URB from transmitted urb queue. caller must hold vdev->priv_lock */
+struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, __u32 seqnum)
+{
+	struct vhci_priv *priv, *tmp;
+	struct urb *urb = NULL;
+	int status;
+
+	list_for_each_entry_safe(priv, tmp, &vdev->priv_rx, list) {
+		if (priv->seqnum != seqnum)
+			continue;
+
+		urb = priv->urb;
+		status = urb->status;
+
+		usbip_dbg_vhci_rx("find urb seqnum %u\n", seqnum);
+
+		switch (status) {
+		case -ENOENT:
+			fallthrough;
+		case -ECONNRESET:
+			dev_dbg(&urb->dev->dev,
+				 "urb seq# %u was unlinked %ssynchronously\n",
+				 seqnum, status == -ENOENT ? "" : "a");
+			break;
+		case -EINPROGRESS:
+			/* no info output */
+			break;
+		default:
+			dev_dbg(&urb->dev->dev,
+				 "urb seq# %u may be in a error, status %d\n",
+				 seqnum, status);
+		}
+
+		list_del(&priv->list);
+		kfree(priv);
+		urb->hcpriv = NULL;
+
+		break;
+	}
+
+	return urb;
+}
+
+static void vhci_recv_ret_submit(struct vhci_device *vdev,
+				 struct usbip_header *pdu)
+{
+	struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
+	struct vhci *vhci = vhci_hcd->vhci;
+	struct usbip_device *ud = &vdev->ud;
+	struct urb *urb;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vdev->priv_lock, flags);
+	urb = pickup_urb_and_free_priv(vdev, pdu->base.seqnum);
+	spin_unlock_irqrestore(&vdev->priv_lock, flags);
+
+	if (!urb) {
+		pr_err("cannot find a urb of seqnum %u max seqnum %d\n",
+			pdu->base.seqnum,
+			atomic_read(&vhci_hcd->seqnum));
+		usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+		return;
+	}
+
+	/* unpack the pdu to a urb */
+	usbip_pack_pdu(pdu, urb, USBIP_RET_SUBMIT, 0);
+
+	/* recv transfer buffer */
+	if (usbip_recv_xbuff(ud, urb) < 0) {
+		urb->status = -EPROTO;
+		goto error;
+	}
+
+	/* recv iso_packet_descriptor */
+	if (usbip_recv_iso(ud, urb) < 0) {
+		urb->status = -EPROTO;
+		goto error;
+	}
+
+	/* restore the padding in iso packets */
+	usbip_pad_iso(ud, urb);
+
+error:
+	if (usbip_dbg_flag_vhci_rx)
+		usbip_dump_urb(urb);
+
+	if (urb->num_sgs)
+		urb->transfer_flags &= ~URB_DMA_MAP_SG;
+
+	usbip_dbg_vhci_rx("now giveback urb %u\n", pdu->base.seqnum);
+
+	spin_lock_irqsave(&vhci->lock, flags);
+	usb_hcd_unlink_urb_from_ep(vhci_hcd_to_hcd(vhci_hcd), urb);
+	spin_unlock_irqrestore(&vhci->lock, flags);
+
+	usb_hcd_giveback_urb(vhci_hcd_to_hcd(vhci_hcd), urb, urb->status);
+
+	usbip_dbg_vhci_rx("Leave\n");
+}
+
+static struct vhci_unlink *dequeue_pending_unlink(struct vhci_device *vdev,
+						  struct usbip_header *pdu)
+{
+	struct vhci_unlink *unlink, *tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vdev->priv_lock, flags);
+
+	list_for_each_entry_safe(unlink, tmp, &vdev->unlink_rx, list) {
+		pr_info("unlink->seqnum %lu\n", unlink->seqnum);
+		if (unlink->seqnum == pdu->base.seqnum) {
+			usbip_dbg_vhci_rx("found pending unlink, %lu\n",
+					  unlink->seqnum);
+			list_del(&unlink->list);
+
+			spin_unlock_irqrestore(&vdev->priv_lock, flags);
+			return unlink;
+		}
+	}
+
+	spin_unlock_irqrestore(&vdev->priv_lock, flags);
+
+	return NULL;
+}
+
+static void vhci_recv_ret_unlink(struct vhci_device *vdev,
+				 struct usbip_header *pdu)
+{
+	struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
+	struct vhci *vhci = vhci_hcd->vhci;
+	struct vhci_unlink *unlink;
+	struct urb *urb;
+	unsigned long flags;
+
+	usbip_dump_header(pdu);
+
+	unlink = dequeue_pending_unlink(vdev, pdu);
+	if (!unlink) {
+		pr_info("cannot find the pending unlink %u\n",
+			pdu->base.seqnum);
+		return;
+	}
+
+	spin_lock_irqsave(&vdev->priv_lock, flags);
+	urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum);
+	spin_unlock_irqrestore(&vdev->priv_lock, flags);
+
+	if (!urb) {
+		/*
+		 * I get the result of a unlink request. But, it seems that I
+		 * already received the result of its submit result and gave
+		 * back the URB.
+		 */
+		pr_info("the urb (seqnum %d) was already given back\n",
+			pdu->base.seqnum);
+	} else {
+		usbip_dbg_vhci_rx("now giveback urb %d\n", pdu->base.seqnum);
+
+		/* If unlink is successful, status is -ECONNRESET */
+		urb->status = pdu->u.ret_unlink.status;
+		pr_info("urb->status %d\n", urb->status);
+
+		spin_lock_irqsave(&vhci->lock, flags);
+		usb_hcd_unlink_urb_from_ep(vhci_hcd_to_hcd(vhci_hcd), urb);
+		spin_unlock_irqrestore(&vhci->lock, flags);
+
+		usb_hcd_giveback_urb(vhci_hcd_to_hcd(vhci_hcd), urb, urb->status);
+	}
+
+	kfree(unlink);
+}
+
+static int vhci_priv_tx_empty(struct vhci_device *vdev)
+{
+	int empty = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vdev->priv_lock, flags);
+	empty = list_empty(&vdev->priv_rx);
+	spin_unlock_irqrestore(&vdev->priv_lock, flags);
+
+	return empty;
+}
+
+/* recv a pdu */
+static void vhci_rx_pdu(struct usbip_device *ud)
+{
+	int ret;
+	struct usbip_header pdu;
+	struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
+
+	usbip_dbg_vhci_rx("Enter\n");
+
+	memset(&pdu, 0, sizeof(pdu));
+
+	/* receive a pdu header */
+	ret = usbip_recv(ud->tcp_socket, &pdu, sizeof(pdu));
+	if (ret < 0) {
+		if (ret == -ECONNRESET)
+			pr_info("connection reset by peer\n");
+		else if (ret == -EAGAIN) {
+			/* ignore if connection was idle */
+			if (vhci_priv_tx_empty(vdev))
+				return;
+			pr_info("connection timed out with pending urbs\n");
+		} else if (ret != -ERESTARTSYS)
+			pr_info("xmit failed %d\n", ret);
+
+		usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+		return;
+	}
+	if (ret == 0) {
+		pr_info("connection closed");
+		usbip_event_add(ud, VDEV_EVENT_DOWN);
+		return;
+	}
+	if (ret != sizeof(pdu)) {
+		pr_err("received pdu size is %d, should be %d\n", ret,
+		       (unsigned int)sizeof(pdu));
+		usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+		return;
+	}
+
+	usbip_header_correct_endian(&pdu, 0);
+
+	if (usbip_dbg_flag_vhci_rx)
+		usbip_dump_header(&pdu);
+
+	switch (pdu.base.command) {
+	case USBIP_RET_SUBMIT:
+		vhci_recv_ret_submit(vdev, &pdu);
+		break;
+	case USBIP_RET_UNLINK:
+		vhci_recv_ret_unlink(vdev, &pdu);
+		break;
+	default:
+		/* NOT REACHED */
+		pr_err("unknown pdu %u\n", pdu.base.command);
+		usbip_dump_header(&pdu);
+		usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+		break;
+	}
+}
+
+int vhci_rx_loop(void *data)
+{
+	struct usbip_device *ud = data;
+
+	while (!kthread_should_stop()) {
+		if (usbip_event_happened(ud))
+			break;
+
+		usbip_kcov_remote_start(ud);
+		vhci_rx_pdu(ud);
+		usbip_kcov_remote_stop();
+	}
+
+	return 0;
+}
diff --git a/drivers/usb/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c
new file mode 100644
index 000000000..e2847cd3e
--- /dev/null
+++ b/drivers/usb/usbip/vhci_sysfs.c
@@ -0,0 +1,527 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ * Copyright (C) 2015-2016 Nobuo Iwata
+ */
+
+#include <linux/kthread.h>
+#include <linux/file.h>
+#include <linux/net.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* Hardening for Spectre-v1 */
+#include <linux/nospec.h>
+
+#include "usbip_common.h"
+#include "vhci.h"
+
+/* TODO: refine locking ?*/
+
+/*
+ * output example:
+ * hub port sta spd dev       sockfd local_busid
+ * hs  0000 004 000 00000000  000003 1-2.3
+ * ................................................
+ * ss  0008 004 000 00000000  000004 2-3.4
+ * ................................................
+ *
+ * Output includes socket fd instead of socket pointer address to avoid
+ * leaking kernel memory address in:
+ *	/sys/devices/platform/vhci_hcd.0/status and in debug output.
+ * The socket pointer address is not used at the moment and it was made
+ * visible as a convenient way to find IP address from socket pointer
+ * address by looking up /proc/net/{tcp,tcp6}. As this opens a security
+ * hole, the change is made to use sockfd instead.
+ *
+ */
+static void port_show_vhci(char **out, int hub, int port, struct vhci_device *vdev)
+{
+	if (hub == HUB_SPEED_HIGH)
+		*out += sprintf(*out, "hs  %04u %03u ",
+				      port, vdev->ud.status);
+	else /* hub == HUB_SPEED_SUPER */
+		*out += sprintf(*out, "ss  %04u %03u ",
+				      port, vdev->ud.status);
+
+	if (vdev->ud.status == VDEV_ST_USED) {
+		*out += sprintf(*out, "%03u %08x ",
+				      vdev->speed, vdev->devid);
+		*out += sprintf(*out, "%06u %s",
+				      vdev->ud.sockfd,
+				      dev_name(&vdev->udev->dev));
+
+	} else {
+		*out += sprintf(*out, "000 00000000 ");
+		*out += sprintf(*out, "000000 0-0");
+	}
+
+	*out += sprintf(*out, "\n");
+}
+
+/* Sysfs entry to show port status */
+static ssize_t status_show_vhci(int pdev_nr, char *out)
+{
+	struct platform_device *pdev = vhcis[pdev_nr].pdev;
+	struct vhci *vhci;
+	struct usb_hcd *hcd;
+	struct vhci_hcd *vhci_hcd;
+	char *s = out;
+	int i;
+	unsigned long flags;
+
+	if (!pdev || !out) {
+		usbip_dbg_vhci_sysfs("show status error\n");
+		return 0;
+	}
+
+	hcd = platform_get_drvdata(pdev);
+	vhci_hcd = hcd_to_vhci_hcd(hcd);
+	vhci = vhci_hcd->vhci;
+
+	spin_lock_irqsave(&vhci->lock, flags);
+
+	for (i = 0; i < VHCI_HC_PORTS; i++) {
+		struct vhci_device *vdev = &vhci->vhci_hcd_hs->vdev[i];
+
+		spin_lock(&vdev->ud.lock);
+		port_show_vhci(&out, HUB_SPEED_HIGH,
+			       pdev_nr * VHCI_PORTS + i, vdev);
+		spin_unlock(&vdev->ud.lock);
+	}
+
+	for (i = 0; i < VHCI_HC_PORTS; i++) {
+		struct vhci_device *vdev = &vhci->vhci_hcd_ss->vdev[i];
+
+		spin_lock(&vdev->ud.lock);
+		port_show_vhci(&out, HUB_SPEED_SUPER,
+			       pdev_nr * VHCI_PORTS + VHCI_HC_PORTS + i, vdev);
+		spin_unlock(&vdev->ud.lock);
+	}
+
+	spin_unlock_irqrestore(&vhci->lock, flags);
+
+	return out - s;
+}
+
+static ssize_t status_show_not_ready(int pdev_nr, char *out)
+{
+	char *s = out;
+	int i = 0;
+
+	for (i = 0; i < VHCI_HC_PORTS; i++) {
+		out += sprintf(out, "hs  %04u %03u ",
+				    (pdev_nr * VHCI_PORTS) + i,
+				    VDEV_ST_NOTASSIGNED);
+		out += sprintf(out, "000 00000000 0000000000000000 0-0");
+		out += sprintf(out, "\n");
+	}
+
+	for (i = 0; i < VHCI_HC_PORTS; i++) {
+		out += sprintf(out, "ss  %04u %03u ",
+				    (pdev_nr * VHCI_PORTS) + VHCI_HC_PORTS + i,
+				    VDEV_ST_NOTASSIGNED);
+		out += sprintf(out, "000 00000000 0000000000000000 0-0");
+		out += sprintf(out, "\n");
+	}
+	return out - s;
+}
+
+static int status_name_to_id(const char *name)
+{
+	char *c;
+	long val;
+	int ret;
+
+	c = strchr(name, '.');
+	if (c == NULL)
+		return 0;
+
+	ret = kstrtol(c+1, 10, &val);
+	if (ret < 0)
+		return ret;
+
+	return val;
+}
+
+static ssize_t status_show(struct device *dev,
+			   struct device_attribute *attr, char *out)
+{
+	char *s = out;
+	int pdev_nr;
+
+	out += sprintf(out,
+		       "hub port sta spd dev      sockfd local_busid\n");
+
+	pdev_nr = status_name_to_id(attr->attr.name);
+	if (pdev_nr < 0)
+		out += status_show_not_ready(pdev_nr, out);
+	else
+		out += status_show_vhci(pdev_nr, out);
+
+	return out - s;
+}
+
+static ssize_t nports_show(struct device *dev, struct device_attribute *attr,
+			   char *out)
+{
+	char *s = out;
+
+	/*
+	 * Half the ports are for SPEED_HIGH and half for SPEED_SUPER,
+	 * thus the * 2.
+	 */
+	out += sprintf(out, "%d\n", VHCI_PORTS * vhci_num_controllers);
+	return out - s;
+}
+static DEVICE_ATTR_RO(nports);
+
+/* Sysfs entry to shutdown a virtual connection */
+static int vhci_port_disconnect(struct vhci_hcd *vhci_hcd, __u32 rhport)
+{
+	struct vhci_device *vdev = &vhci_hcd->vdev[rhport];
+	struct vhci *vhci = vhci_hcd->vhci;
+	unsigned long flags;
+
+	usbip_dbg_vhci_sysfs("enter\n");
+
+	mutex_lock(&vdev->ud.sysfs_lock);
+
+	/* lock */
+	spin_lock_irqsave(&vhci->lock, flags);
+	spin_lock(&vdev->ud.lock);
+
+	if (vdev->ud.status == VDEV_ST_NULL) {
+		pr_err("not connected %d\n", vdev->ud.status);
+
+		/* unlock */
+		spin_unlock(&vdev->ud.lock);
+		spin_unlock_irqrestore(&vhci->lock, flags);
+		mutex_unlock(&vdev->ud.sysfs_lock);
+
+		return -EINVAL;
+	}
+
+	/* unlock */
+	spin_unlock(&vdev->ud.lock);
+	spin_unlock_irqrestore(&vhci->lock, flags);
+
+	usbip_event_add(&vdev->ud, VDEV_EVENT_DOWN);
+
+	mutex_unlock(&vdev->ud.sysfs_lock);
+
+	return 0;
+}
+
+static int valid_port(__u32 *pdev_nr, __u32 *rhport)
+{
+	if (*pdev_nr >= vhci_num_controllers) {
+		pr_err("pdev %u\n", *pdev_nr);
+		return 0;
+	}
+	*pdev_nr = array_index_nospec(*pdev_nr, vhci_num_controllers);
+
+	if (*rhport >= VHCI_HC_PORTS) {
+		pr_err("rhport %u\n", *rhport);
+		return 0;
+	}
+	*rhport = array_index_nospec(*rhport, VHCI_HC_PORTS);
+
+	return 1;
+}
+
+static ssize_t detach_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	__u32 port = 0, pdev_nr = 0, rhport = 0;
+	struct usb_hcd *hcd;
+	struct vhci_hcd *vhci_hcd;
+	int ret;
+
+	if (kstrtoint(buf, 10, &port) < 0)
+		return -EINVAL;
+
+	pdev_nr = port_to_pdev_nr(port);
+	rhport = port_to_rhport(port);
+
+	if (!valid_port(&pdev_nr, &rhport))
+		return -EINVAL;
+
+	hcd = platform_get_drvdata(vhcis[pdev_nr].pdev);
+	if (hcd == NULL) {
+		dev_err(dev, "port is not ready %u\n", port);
+		return -EAGAIN;
+	}
+
+	usbip_dbg_vhci_sysfs("rhport %d\n", rhport);
+
+	if ((port / VHCI_HC_PORTS) % 2)
+		vhci_hcd = hcd_to_vhci_hcd(hcd)->vhci->vhci_hcd_ss;
+	else
+		vhci_hcd = hcd_to_vhci_hcd(hcd)->vhci->vhci_hcd_hs;
+
+	ret = vhci_port_disconnect(vhci_hcd, rhport);
+	if (ret < 0)
+		return -EINVAL;
+
+	usbip_dbg_vhci_sysfs("Leave\n");
+
+	return count;
+}
+static DEVICE_ATTR_WO(detach);
+
+static int valid_args(__u32 *pdev_nr, __u32 *rhport,
+		      enum usb_device_speed speed)
+{
+	if (!valid_port(pdev_nr, rhport)) {
+		return 0;
+	}
+
+	switch (speed) {
+	case USB_SPEED_LOW:
+	case USB_SPEED_FULL:
+	case USB_SPEED_HIGH:
+	case USB_SPEED_WIRELESS:
+	case USB_SPEED_SUPER:
+		break;
+	default:
+		pr_err("Failed attach request for unsupported USB speed: %s\n",
+			usb_speed_string(speed));
+		return 0;
+	}
+
+	return 1;
+}
+
+/* Sysfs entry to establish a virtual connection */
+/*
+ * To start a new USB/IP attachment, a userland program needs to setup a TCP
+ * connection and then write its socket descriptor with remote device
+ * information into this sysfs file.
+ *
+ * A remote device is virtually attached to the root-hub port of @rhport with
+ * @speed. @devid is embedded into a request to specify the remote device in a
+ * server host.
+ *
+ * write() returns 0 on success, else negative errno.
+ */
+static ssize_t attach_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct socket *socket;
+	int sockfd = 0;
+	__u32 port = 0, pdev_nr = 0, rhport = 0, devid = 0, speed = 0;
+	struct usb_hcd *hcd;
+	struct vhci_hcd *vhci_hcd;
+	struct vhci_device *vdev;
+	struct vhci *vhci;
+	int err;
+	unsigned long flags;
+	struct task_struct *tcp_rx = NULL;
+	struct task_struct *tcp_tx = NULL;
+
+	/*
+	 * @rhport: port number of vhci_hcd
+	 * @sockfd: socket descriptor of an established TCP connection
+	 * @devid: unique device identifier in a remote host
+	 * @speed: usb device speed in a remote host
+	 */
+	if (sscanf(buf, "%u %u %u %u", &port, &sockfd, &devid, &speed) != 4)
+		return -EINVAL;
+	pdev_nr = port_to_pdev_nr(port);
+	rhport = port_to_rhport(port);
+
+	usbip_dbg_vhci_sysfs("port(%u) pdev(%d) rhport(%u)\n",
+			     port, pdev_nr, rhport);
+	usbip_dbg_vhci_sysfs("sockfd(%u) devid(%u) speed(%u)\n",
+			     sockfd, devid, speed);
+
+	/* check received parameters */
+	if (!valid_args(&pdev_nr, &rhport, speed))
+		return -EINVAL;
+
+	hcd = platform_get_drvdata(vhcis[pdev_nr].pdev);
+	if (hcd == NULL) {
+		dev_err(dev, "port %d is not ready\n", port);
+		return -EAGAIN;
+	}
+
+	vhci_hcd = hcd_to_vhci_hcd(hcd);
+	vhci = vhci_hcd->vhci;
+
+	if (speed == USB_SPEED_SUPER)
+		vdev = &vhci->vhci_hcd_ss->vdev[rhport];
+	else
+		vdev = &vhci->vhci_hcd_hs->vdev[rhport];
+
+	mutex_lock(&vdev->ud.sysfs_lock);
+
+	/* Extract socket from fd. */
+	socket = sockfd_lookup(sockfd, &err);
+	if (!socket) {
+		dev_err(dev, "failed to lookup sock");
+		err = -EINVAL;
+		goto unlock_mutex;
+	}
+	if (socket->type != SOCK_STREAM) {
+		dev_err(dev, "Expecting SOCK_STREAM - found %d",
+			socket->type);
+		sockfd_put(socket);
+		err = -EINVAL;
+		goto unlock_mutex;
+	}
+
+	/* create threads before locking */
+	tcp_rx = kthread_create(vhci_rx_loop, &vdev->ud, "vhci_rx");
+	if (IS_ERR(tcp_rx)) {
+		sockfd_put(socket);
+		err = -EINVAL;
+		goto unlock_mutex;
+	}
+	tcp_tx = kthread_create(vhci_tx_loop, &vdev->ud, "vhci_tx");
+	if (IS_ERR(tcp_tx)) {
+		kthread_stop(tcp_rx);
+		sockfd_put(socket);
+		err = -EINVAL;
+		goto unlock_mutex;
+	}
+
+	/* get task structs now */
+	get_task_struct(tcp_rx);
+	get_task_struct(tcp_tx);
+
+	/* now begin lock until setting vdev status set */
+	spin_lock_irqsave(&vhci->lock, flags);
+	spin_lock(&vdev->ud.lock);
+
+	if (vdev->ud.status != VDEV_ST_NULL) {
+		/* end of the lock */
+		spin_unlock(&vdev->ud.lock);
+		spin_unlock_irqrestore(&vhci->lock, flags);
+
+		sockfd_put(socket);
+		kthread_stop_put(tcp_rx);
+		kthread_stop_put(tcp_tx);
+
+		dev_err(dev, "port %d already used\n", rhport);
+		/*
+		 * Will be retried from userspace
+		 * if there's another free port.
+		 */
+		err = -EBUSY;
+		goto unlock_mutex;
+	}
+
+	dev_info(dev, "pdev(%u) rhport(%u) sockfd(%d)\n",
+		 pdev_nr, rhport, sockfd);
+	dev_info(dev, "devid(%u) speed(%u) speed_str(%s)\n",
+		 devid, speed, usb_speed_string(speed));
+
+	vdev->devid         = devid;
+	vdev->speed         = speed;
+	vdev->ud.sockfd     = sockfd;
+	vdev->ud.tcp_socket = socket;
+	vdev->ud.tcp_rx     = tcp_rx;
+	vdev->ud.tcp_tx     = tcp_tx;
+	vdev->ud.status     = VDEV_ST_NOTASSIGNED;
+	usbip_kcov_handle_init(&vdev->ud);
+
+	spin_unlock(&vdev->ud.lock);
+	spin_unlock_irqrestore(&vhci->lock, flags);
+	/* end the lock */
+
+	wake_up_process(vdev->ud.tcp_rx);
+	wake_up_process(vdev->ud.tcp_tx);
+
+	rh_port_connect(vdev, speed);
+
+	dev_info(dev, "Device attached\n");
+
+	mutex_unlock(&vdev->ud.sysfs_lock);
+
+	return count;
+
+unlock_mutex:
+	mutex_unlock(&vdev->ud.sysfs_lock);
+	return err;
+}
+static DEVICE_ATTR_WO(attach);
+
+#define MAX_STATUS_NAME 16
+
+struct status_attr {
+	struct device_attribute attr;
+	char name[MAX_STATUS_NAME+1];
+};
+
+static struct status_attr *status_attrs;
+
+static void set_status_attr(int id)
+{
+	struct status_attr *status;
+
+	status = status_attrs + id;
+	if (id == 0)
+		strcpy(status->name, "status");
+	else
+		snprintf(status->name, MAX_STATUS_NAME+1, "status.%d", id);
+	status->attr.attr.name = status->name;
+	status->attr.attr.mode = S_IRUGO;
+	status->attr.show = status_show;
+	sysfs_attr_init(&status->attr.attr);
+}
+
+static int init_status_attrs(void)
+{
+	int id;
+
+	status_attrs = kcalloc(vhci_num_controllers, sizeof(struct status_attr),
+			       GFP_KERNEL);
+	if (status_attrs == NULL)
+		return -ENOMEM;
+
+	for (id = 0; id < vhci_num_controllers; id++)
+		set_status_attr(id);
+
+	return 0;
+}
+
+static void finish_status_attrs(void)
+{
+	kfree(status_attrs);
+}
+
+struct attribute_group vhci_attr_group = {
+	.attrs = NULL,
+};
+
+int vhci_init_attr_group(void)
+{
+	struct attribute **attrs;
+	int ret, i;
+
+	attrs = kcalloc((vhci_num_controllers + 5), sizeof(struct attribute *),
+			GFP_KERNEL);
+	if (attrs == NULL)
+		return -ENOMEM;
+
+	ret = init_status_attrs();
+	if (ret) {
+		kfree(attrs);
+		return ret;
+	}
+	*attrs = &dev_attr_nports.attr;
+	*(attrs + 1) = &dev_attr_detach.attr;
+	*(attrs + 2) = &dev_attr_attach.attr;
+	*(attrs + 3) = &dev_attr_usbip_debug.attr;
+	for (i = 0; i < vhci_num_controllers; i++)
+		*(attrs + i + 4) = &((status_attrs + i)->attr.attr);
+	vhci_attr_group.attrs = attrs;
+	return 0;
+}
+
+void vhci_finish_attr_group(void)
+{
+	finish_status_attrs();
+	kfree(vhci_attr_group.attrs);
+}
diff --git a/drivers/usb/usbip/vhci_tx.c b/drivers/usb/usbip/vhci_tx.c
new file mode 100644
index 000000000..0ae40a13a
--- /dev/null
+++ b/drivers/usb/usbip/vhci_tx.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ */
+
+#include <linux/kthread.h>
+#include <linux/slab.h>
+#include <linux/scatterlist.h>
+
+#include "usbip_common.h"
+#include "vhci.h"
+
+static void setup_cmd_submit_pdu(struct usbip_header *pdup,  struct urb *urb)
+{
+	struct vhci_priv *priv = ((struct vhci_priv *)urb->hcpriv);
+	struct vhci_device *vdev = priv->vdev;
+
+	usbip_dbg_vhci_tx("URB, local devnum %u, remote devid %u\n",
+			  usb_pipedevice(urb->pipe), vdev->devid);
+
+	pdup->base.command   = USBIP_CMD_SUBMIT;
+	pdup->base.seqnum    = priv->seqnum;
+	pdup->base.devid     = vdev->devid;
+	pdup->base.direction = usb_pipein(urb->pipe) ?
+		USBIP_DIR_IN : USBIP_DIR_OUT;
+	pdup->base.ep	     = usb_pipeendpoint(urb->pipe);
+
+	usbip_pack_pdu(pdup, urb, USBIP_CMD_SUBMIT, 1);
+
+	if (urb->setup_packet)
+		memcpy(pdup->u.cmd_submit.setup, urb->setup_packet, 8);
+}
+
+static struct vhci_priv *dequeue_from_priv_tx(struct vhci_device *vdev)
+{
+	struct vhci_priv *priv, *tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vdev->priv_lock, flags);
+
+	list_for_each_entry_safe(priv, tmp, &vdev->priv_tx, list) {
+		list_move_tail(&priv->list, &vdev->priv_rx);
+		spin_unlock_irqrestore(&vdev->priv_lock, flags);
+		return priv;
+	}
+
+	spin_unlock_irqrestore(&vdev->priv_lock, flags);
+
+	return NULL;
+}
+
+static int vhci_send_cmd_submit(struct vhci_device *vdev)
+{
+	struct usbip_iso_packet_descriptor *iso_buffer = NULL;
+	struct vhci_priv *priv = NULL;
+	struct scatterlist *sg;
+
+	struct msghdr msg;
+	struct kvec *iov;
+	size_t txsize;
+
+	size_t total_size = 0;
+	int iovnum;
+	int err = -ENOMEM;
+	int i;
+
+	while ((priv = dequeue_from_priv_tx(vdev)) != NULL) {
+		int ret;
+		struct urb *urb = priv->urb;
+		struct usbip_header pdu_header;
+
+		txsize = 0;
+		memset(&pdu_header, 0, sizeof(pdu_header));
+		memset(&msg, 0, sizeof(msg));
+		memset(&iov, 0, sizeof(iov));
+
+		usbip_dbg_vhci_tx("setup txdata urb seqnum %lu\n",
+				  priv->seqnum);
+
+		if (urb->num_sgs && usb_pipeout(urb->pipe))
+			iovnum = 2 + urb->num_sgs;
+		else
+			iovnum = 3;
+
+		iov = kcalloc(iovnum, sizeof(*iov), GFP_KERNEL);
+		if (!iov) {
+			usbip_event_add(&vdev->ud, SDEV_EVENT_ERROR_MALLOC);
+			return -ENOMEM;
+		}
+
+		if (urb->num_sgs)
+			urb->transfer_flags |= URB_DMA_MAP_SG;
+
+		/* 1. setup usbip_header */
+		setup_cmd_submit_pdu(&pdu_header, urb);
+		usbip_header_correct_endian(&pdu_header, 1);
+		iovnum = 0;
+
+		iov[iovnum].iov_base = &pdu_header;
+		iov[iovnum].iov_len  = sizeof(pdu_header);
+		txsize += sizeof(pdu_header);
+		iovnum++;
+
+		/* 2. setup transfer buffer */
+		if (!usb_pipein(urb->pipe) && urb->transfer_buffer_length > 0) {
+			if (urb->num_sgs &&
+				      !usb_endpoint_xfer_isoc(&urb->ep->desc)) {
+				for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+					iov[iovnum].iov_base = sg_virt(sg);
+					iov[iovnum].iov_len = sg->length;
+					iovnum++;
+				}
+			} else {
+				iov[iovnum].iov_base = urb->transfer_buffer;
+				iov[iovnum].iov_len  =
+						urb->transfer_buffer_length;
+				iovnum++;
+			}
+			txsize += urb->transfer_buffer_length;
+		}
+
+		/* 3. setup iso_packet_descriptor */
+		if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+			ssize_t len = 0;
+
+			iso_buffer = usbip_alloc_iso_desc_pdu(urb, &len);
+			if (!iso_buffer) {
+				usbip_event_add(&vdev->ud,
+						SDEV_EVENT_ERROR_MALLOC);
+				goto err_iso_buffer;
+			}
+
+			iov[iovnum].iov_base = iso_buffer;
+			iov[iovnum].iov_len  = len;
+			iovnum++;
+			txsize += len;
+		}
+
+		ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, iov, iovnum,
+				     txsize);
+		if (ret != txsize) {
+			pr_err("sendmsg failed!, ret=%d for %zd\n", ret,
+			       txsize);
+			usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_TCP);
+			err = -EPIPE;
+			goto err_tx;
+		}
+
+		kfree(iov);
+		/* This is only for isochronous case */
+		kfree(iso_buffer);
+		iso_buffer = NULL;
+
+		usbip_dbg_vhci_tx("send txdata\n");
+
+		total_size += txsize;
+	}
+
+	return total_size;
+
+err_tx:
+	kfree(iso_buffer);
+err_iso_buffer:
+	kfree(iov);
+
+	return err;
+}
+
+static struct vhci_unlink *dequeue_from_unlink_tx(struct vhci_device *vdev)
+{
+	struct vhci_unlink *unlink, *tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vdev->priv_lock, flags);
+
+	list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) {
+		list_move_tail(&unlink->list, &vdev->unlink_rx);
+		spin_unlock_irqrestore(&vdev->priv_lock, flags);
+		return unlink;
+	}
+
+	spin_unlock_irqrestore(&vdev->priv_lock, flags);
+
+	return NULL;
+}
+
+static int vhci_send_cmd_unlink(struct vhci_device *vdev)
+{
+	struct vhci_unlink *unlink = NULL;
+
+	struct msghdr msg;
+	struct kvec iov;
+	size_t txsize;
+	size_t total_size = 0;
+
+	while ((unlink = dequeue_from_unlink_tx(vdev)) != NULL) {
+		int ret;
+		struct usbip_header pdu_header;
+
+		memset(&pdu_header, 0, sizeof(pdu_header));
+		memset(&msg, 0, sizeof(msg));
+		memset(&iov, 0, sizeof(iov));
+
+		usbip_dbg_vhci_tx("setup cmd unlink, %lu\n", unlink->seqnum);
+
+		/* 1. setup usbip_header */
+		pdu_header.base.command = USBIP_CMD_UNLINK;
+		pdu_header.base.seqnum  = unlink->seqnum;
+		pdu_header.base.devid	= vdev->devid;
+		pdu_header.base.ep	= 0;
+		pdu_header.u.cmd_unlink.seqnum = unlink->unlink_seqnum;
+
+		usbip_header_correct_endian(&pdu_header, 1);
+
+		iov.iov_base = &pdu_header;
+		iov.iov_len  = sizeof(pdu_header);
+		txsize = sizeof(pdu_header);
+
+		ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, &iov, 1, txsize);
+		if (ret != txsize) {
+			pr_err("sendmsg failed!, ret=%d for %zd\n", ret,
+			       txsize);
+			usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_TCP);
+			return -1;
+		}
+
+		usbip_dbg_vhci_tx("send txdata\n");
+
+		total_size += txsize;
+	}
+
+	return total_size;
+}
+
+int vhci_tx_loop(void *data)
+{
+	struct usbip_device *ud = data;
+	struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
+
+	while (!kthread_should_stop()) {
+		if (vhci_send_cmd_submit(vdev) < 0)
+			break;
+
+		if (vhci_send_cmd_unlink(vdev) < 0)
+			break;
+
+		wait_event_interruptible(vdev->waitq_tx,
+					 (!list_empty(&vdev->priv_tx) ||
+					  !list_empty(&vdev->unlink_tx) ||
+					  kthread_should_stop()));
+
+		usbip_dbg_vhci_tx("pending urbs ?, now wake up\n");
+	}
+
+	return 0;
+}
diff --git a/drivers/usb/usbip/vudc.h b/drivers/usb/usbip/vudc.h
new file mode 100644
index 000000000..1bd4bc005
--- /dev/null
+++ b/drivers/usb/usbip/vudc.h
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Karol Kosik <karo9@interia.eu>
+ * Copyright (C) 2015-2016 Samsung Electronics
+ *               Igor Kotrasinski <i.kotrasinsk@samsung.com>
+ *               Krzysztof Opasiak <k.opasiak@samsung.com>
+ */
+
+#ifndef __USBIP_VUDC_H
+#define __USBIP_VUDC_H
+
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/ch9.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/time.h>
+#include <linux/sysfs.h>
+
+#include "usbip_common.h"
+
+#define GADGET_NAME "usbip-vudc"
+
+struct vep {
+	struct usb_ep ep;
+	unsigned type:2; /* type, as USB_ENDPOINT_XFER_* */
+	char name[8];	/* space for ep name */
+
+	const struct usb_endpoint_descriptor *desc;
+	struct usb_gadget *gadget;
+	struct list_head req_queue; /* Request queue */
+	unsigned halted:1;
+	unsigned wedged:1;
+	unsigned already_seen:1;
+	unsigned setup_stage:1;
+};
+
+struct vrequest {
+	struct usb_request req;
+	struct vudc *udc;
+	struct list_head req_entry; /* Request queue */
+};
+
+struct urbp {
+	struct urb *urb;
+	struct vep *ep;
+	struct list_head urb_entry; /* urb queue */
+	unsigned long seqnum;
+	unsigned type:2; /* for tx, since ep type can change after */
+	unsigned new:1;
+};
+
+struct v_unlink {
+	unsigned long seqnum;
+	__u32 status;
+};
+
+enum tx_type {
+	TX_UNLINK,
+	TX_SUBMIT,
+};
+
+struct tx_item {
+	struct list_head tx_entry;
+	enum tx_type type;
+	union {
+		struct urbp *s;
+		struct v_unlink *u;
+	};
+};
+
+enum tr_state {
+	VUDC_TR_RUNNING,
+	VUDC_TR_IDLE,
+	VUDC_TR_STOPPED,
+};
+
+struct transfer_timer {
+	struct timer_list timer;
+	enum tr_state state;
+	unsigned long frame_start;
+	int frame_limit;
+};
+
+struct vudc {
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *driver;
+	struct platform_device *pdev;
+
+	struct usb_device_descriptor dev_desc;
+
+	struct usbip_device ud;
+	struct transfer_timer tr_timer;
+	struct timespec64 start_time;
+
+	struct list_head urb_queue;
+
+	spinlock_t lock_tx;
+	struct list_head tx_queue;
+	wait_queue_head_t tx_waitq;
+
+	spinlock_t lock;
+	struct vep *ep;
+	int address;
+	u16 devstatus;
+
+	unsigned pullup:1;
+	unsigned connected:1;
+	unsigned desc_cached:1;
+};
+
+struct vudc_device {
+	struct platform_device *pdev;
+	struct list_head dev_entry;
+};
+
+extern const struct attribute_group *vudc_groups[];
+
+/* visible everywhere */
+
+static inline struct vep *to_vep(struct usb_ep *_ep)
+{
+	return container_of(_ep, struct vep, ep);
+}
+
+static inline struct vrequest *to_vrequest(
+	struct usb_request *_req)
+{
+	return container_of(_req, struct vrequest, req);
+}
+
+static inline struct vudc *usb_gadget_to_vudc(
+	struct usb_gadget *_gadget)
+{
+	return container_of(_gadget, struct vudc, gadget);
+}
+
+static inline struct vudc *ep_to_vudc(struct vep *ep)
+{
+	return container_of(ep->gadget, struct vudc, gadget);
+}
+
+/* vudc_sysfs.c */
+
+int get_gadget_descs(struct vudc *udc);
+
+/* vudc_tx.c */
+
+int v_tx_loop(void *data);
+void v_enqueue_ret_unlink(struct vudc *udc, __u32 seqnum, __u32 status);
+void v_enqueue_ret_submit(struct vudc *udc, struct urbp *urb_p);
+
+/* vudc_rx.c */
+
+int v_rx_loop(void *data);
+
+/* vudc_transfer.c */
+
+void v_init_timer(struct vudc *udc);
+void v_start_timer(struct vudc *udc);
+void v_kick_timer(struct vudc *udc, unsigned long time);
+void v_stop_timer(struct vudc *udc);
+
+/* vudc_dev.c */
+
+struct urbp *alloc_urbp(void);
+void free_urbp_and_urb(struct urbp *urb_p);
+
+struct vep *vudc_find_endpoint(struct vudc *udc, u8 address);
+
+struct vudc_device *alloc_vudc_device(int devid);
+void put_vudc_device(struct vudc_device *udc_dev);
+
+int vudc_probe(struct platform_device *pdev);
+int vudc_remove(struct platform_device *pdev);
+
+#endif /* __USBIP_VUDC_H */
diff --git a/drivers/usb/usbip/vudc_dev.c b/drivers/usb/usbip/vudc_dev.c
new file mode 100644
index 000000000..2bc428f2e
--- /dev/null
+++ b/drivers/usb/usbip/vudc_dev.c
@@ -0,0 +1,640 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Karol Kosik <karo9@interia.eu>
+ * Copyright (C) 2015-2016 Samsung Electronics
+ *               Igor Kotrasinski <i.kotrasinsk@samsung.com>
+ *               Krzysztof Opasiak <k.opasiak@samsung.com>
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/hcd.h>
+#include <linux/kthread.h>
+#include <linux/file.h>
+#include <linux/byteorder/generic.h>
+
+#include "usbip_common.h"
+#include "vudc.h"
+
+#define VIRTUAL_ENDPOINTS (1 /* ep0 */ + 15 /* in eps */ + 15 /* out eps */)
+
+/* urb-related structures alloc / free */
+
+
+static void free_urb(struct urb *urb)
+{
+	if (!urb)
+		return;
+
+	kfree(urb->setup_packet);
+	urb->setup_packet = NULL;
+
+	kfree(urb->transfer_buffer);
+	urb->transfer_buffer = NULL;
+
+	usb_free_urb(urb);
+}
+
+struct urbp *alloc_urbp(void)
+{
+	struct urbp *urb_p;
+
+	urb_p = kzalloc(sizeof(*urb_p), GFP_KERNEL);
+	if (!urb_p)
+		return urb_p;
+
+	urb_p->urb = NULL;
+	urb_p->ep = NULL;
+	INIT_LIST_HEAD(&urb_p->urb_entry);
+	return urb_p;
+}
+
+static void free_urbp(struct urbp *urb_p)
+{
+	kfree(urb_p);
+}
+
+void free_urbp_and_urb(struct urbp *urb_p)
+{
+	if (!urb_p)
+		return;
+	free_urb(urb_p->urb);
+	free_urbp(urb_p);
+}
+
+
+/* utilities ; almost verbatim from dummy_hcd.c */
+
+/* called with spinlock held */
+static void nuke(struct vudc *udc, struct vep *ep)
+{
+	struct vrequest	*req;
+
+	while (!list_empty(&ep->req_queue)) {
+		req = list_first_entry(&ep->req_queue, struct vrequest,
+				       req_entry);
+		list_del_init(&req->req_entry);
+		req->req.status = -ESHUTDOWN;
+
+		spin_unlock(&udc->lock);
+		usb_gadget_giveback_request(&ep->ep, &req->req);
+		spin_lock(&udc->lock);
+	}
+}
+
+/* caller must hold lock */
+static void stop_activity(struct vudc *udc)
+{
+	int i;
+	struct urbp *urb_p, *tmp;
+
+	udc->address = 0;
+
+	for (i = 0; i < VIRTUAL_ENDPOINTS; i++)
+		nuke(udc, &udc->ep[i]);
+
+	list_for_each_entry_safe(urb_p, tmp, &udc->urb_queue, urb_entry) {
+		list_del(&urb_p->urb_entry);
+		free_urbp_and_urb(urb_p);
+	}
+}
+
+struct vep *vudc_find_endpoint(struct vudc *udc, u8 address)
+{
+	int i;
+
+	if ((address & ~USB_DIR_IN) == 0)
+		return &udc->ep[0];
+
+	for (i = 1; i < VIRTUAL_ENDPOINTS; i++) {
+		struct vep *ep = &udc->ep[i];
+
+		if (!ep->desc)
+			continue;
+		if (ep->desc->bEndpointAddress == address)
+			return ep;
+	}
+	return NULL;
+}
+
+/* gadget ops */
+
+static int vgadget_get_frame(struct usb_gadget *_gadget)
+{
+	struct timespec64 now;
+	struct vudc *udc = usb_gadget_to_vudc(_gadget);
+
+	ktime_get_ts64(&now);
+	return ((now.tv_sec - udc->start_time.tv_sec) * 1000 +
+		(now.tv_nsec - udc->start_time.tv_nsec) / NSEC_PER_MSEC)
+			& 0x7FF;
+}
+
+static int vgadget_set_selfpowered(struct usb_gadget *_gadget, int value)
+{
+	struct vudc *udc = usb_gadget_to_vudc(_gadget);
+
+	if (value)
+		udc->devstatus |= (1 << USB_DEVICE_SELF_POWERED);
+	else
+		udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
+	return 0;
+}
+
+static int vgadget_pullup(struct usb_gadget *_gadget, int value)
+{
+	struct vudc *udc = usb_gadget_to_vudc(_gadget);
+	unsigned long flags;
+	int ret;
+
+
+	spin_lock_irqsave(&udc->lock, flags);
+	value = !!value;
+	if (value == udc->pullup)
+		goto unlock;
+
+	udc->pullup = value;
+	if (value) {
+		udc->gadget.speed = min_t(u8, USB_SPEED_HIGH,
+					   udc->driver->max_speed);
+		udc->ep[0].ep.maxpacket = 64;
+		/*
+		 * This is the first place where we can ask our
+		 * gadget driver for descriptors.
+		 */
+		ret = get_gadget_descs(udc);
+		if (ret) {
+			dev_err(&udc->gadget.dev, "Unable go get desc: %d", ret);
+			goto unlock;
+		}
+
+		spin_unlock_irqrestore(&udc->lock, flags);
+		usbip_start_eh(&udc->ud);
+	} else {
+		/* Invalidate descriptors */
+		udc->desc_cached = 0;
+
+		spin_unlock_irqrestore(&udc->lock, flags);
+		usbip_event_add(&udc->ud, VUDC_EVENT_REMOVED);
+		usbip_stop_eh(&udc->ud); /* Wait for eh completion */
+	}
+
+	return 0;
+
+unlock:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+static int vgadget_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct vudc *udc = usb_gadget_to_vudc(g);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->driver = driver;
+	udc->pullup = udc->connected = udc->desc_cached = 0;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int vgadget_udc_stop(struct usb_gadget *g)
+{
+	struct vudc *udc = usb_gadget_to_vudc(g);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->driver = NULL;
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+static const struct usb_gadget_ops vgadget_ops = {
+	.get_frame	= vgadget_get_frame,
+	.set_selfpowered = vgadget_set_selfpowered,
+	.pullup		= vgadget_pullup,
+	.udc_start	= vgadget_udc_start,
+	.udc_stop	= vgadget_udc_stop,
+};
+
+
+/* endpoint ops */
+
+static int vep_enable(struct usb_ep *_ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct vep	*ep;
+	struct vudc	*udc;
+	unsigned int	maxp;
+	unsigned long	flags;
+
+	ep = to_vep(_ep);
+	udc = ep_to_vudc(ep);
+
+	if (!_ep || !desc || ep->desc || _ep->caps.type_control
+			|| desc->bDescriptorType != USB_DT_ENDPOINT)
+		return -EINVAL;
+
+	if (!udc->driver)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	maxp = usb_endpoint_maxp(desc);
+	_ep->maxpacket = maxp;
+	ep->desc = desc;
+	ep->type = usb_endpoint_type(desc);
+	ep->halted = ep->wedged = 0;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int vep_disable(struct usb_ep *_ep)
+{
+	struct vep *ep;
+	struct vudc *udc;
+	unsigned long flags;
+
+	ep = to_vep(_ep);
+	udc = ep_to_vudc(ep);
+	if (!_ep || !ep->desc || _ep->caps.type_control)
+		return -EINVAL;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	ep->desc = NULL;
+	nuke(udc, ep);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static struct usb_request *vep_alloc_request(struct usb_ep *_ep,
+		gfp_t mem_flags)
+{
+	struct vrequest *req;
+
+	if (!_ep)
+		return NULL;
+
+	req = kzalloc(sizeof(*req), mem_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->req_entry);
+
+	return &req->req;
+}
+
+static void vep_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct vrequest *req;
+
+	/* ep is always valid here - see usb_ep_free_request() */
+	if (!_req)
+		return;
+
+	req = to_vrequest(_req);
+	kfree(req);
+}
+
+static int vep_queue(struct usb_ep *_ep, struct usb_request *_req,
+		gfp_t mem_flags)
+{
+	struct vep *ep;
+	struct vrequest *req;
+	struct vudc *udc;
+	unsigned long flags;
+
+	if (!_ep || !_req)
+		return -EINVAL;
+
+	ep = to_vep(_ep);
+	req = to_vrequest(_req);
+	udc = ep_to_vudc(ep);
+
+	spin_lock_irqsave(&udc->lock, flags);
+	_req->actual = 0;
+	_req->status = -EINPROGRESS;
+
+	list_add_tail(&req->req_entry, &ep->req_queue);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int vep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct vep *ep;
+	struct vrequest *req;
+	struct vudc *udc;
+	struct vrequest *lst;
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	if (!_ep || !_req)
+		return ret;
+
+	ep = to_vep(_ep);
+	req = to_vrequest(_req);
+	udc = req->udc;
+
+	if (!udc->driver)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	list_for_each_entry(lst, &ep->req_queue, req_entry) {
+		if (&lst->req == _req) {
+			list_del_init(&lst->req_entry);
+			_req->status = -ECONNRESET;
+			ret = 0;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (ret == 0)
+		usb_gadget_giveback_request(_ep, _req);
+
+	return ret;
+}
+
+static int
+vep_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
+{
+	struct vep *ep;
+	struct vudc *udc;
+	unsigned long flags;
+	int ret = 0;
+
+	ep = to_vep(_ep);
+	if (!_ep)
+		return -EINVAL;
+
+	udc = ep_to_vudc(ep);
+	if (!udc->driver)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (!value)
+		ep->halted = ep->wedged = 0;
+	else if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) &&
+			!list_empty(&ep->req_queue))
+		ret = -EAGAIN;
+	else {
+		ep->halted = 1;
+		if (wedged)
+			ep->wedged = 1;
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return ret;
+}
+
+static int
+vep_set_halt(struct usb_ep *_ep, int value)
+{
+	return vep_set_halt_and_wedge(_ep, value, 0);
+}
+
+static int vep_set_wedge(struct usb_ep *_ep)
+{
+	return vep_set_halt_and_wedge(_ep, 1, 1);
+}
+
+static const struct usb_ep_ops vep_ops = {
+	.enable		= vep_enable,
+	.disable	= vep_disable,
+
+	.alloc_request	= vep_alloc_request,
+	.free_request	= vep_free_request,
+
+	.queue		= vep_queue,
+	.dequeue	= vep_dequeue,
+
+	.set_halt	= vep_set_halt,
+	.set_wedge	= vep_set_wedge,
+};
+
+
+/* shutdown / reset / error handlers */
+
+static void vudc_shutdown(struct usbip_device *ud)
+{
+	struct vudc *udc = container_of(ud, struct vudc, ud);
+	int call_disconnect = 0;
+	unsigned long flags;
+
+	dev_dbg(&udc->pdev->dev, "device shutdown");
+	if (ud->tcp_socket)
+		kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR);
+
+	if (ud->tcp_rx) {
+		kthread_stop_put(ud->tcp_rx);
+		ud->tcp_rx = NULL;
+	}
+	if (ud->tcp_tx) {
+		kthread_stop_put(ud->tcp_tx);
+		ud->tcp_tx = NULL;
+	}
+
+	if (ud->tcp_socket) {
+		sockfd_put(ud->tcp_socket);
+		ud->tcp_socket = NULL;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	stop_activity(udc);
+	if (udc->connected && udc->driver->disconnect)
+		call_disconnect = 1;
+	udc->connected = 0;
+	spin_unlock_irqrestore(&udc->lock, flags);
+	if (call_disconnect)
+		udc->driver->disconnect(&udc->gadget);
+}
+
+static void vudc_device_reset(struct usbip_device *ud)
+{
+	struct vudc *udc = container_of(ud, struct vudc, ud);
+	unsigned long flags;
+
+	dev_dbg(&udc->pdev->dev, "device reset");
+	spin_lock_irqsave(&udc->lock, flags);
+	stop_activity(udc);
+	spin_unlock_irqrestore(&udc->lock, flags);
+	if (udc->driver)
+		usb_gadget_udc_reset(&udc->gadget, udc->driver);
+	spin_lock_irqsave(&ud->lock, flags);
+	ud->status = SDEV_ST_AVAILABLE;
+	spin_unlock_irqrestore(&ud->lock, flags);
+}
+
+static void vudc_device_unusable(struct usbip_device *ud)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ud->lock, flags);
+	ud->status = SDEV_ST_ERROR;
+	spin_unlock_irqrestore(&ud->lock, flags);
+}
+
+/* device setup / cleanup */
+
+struct vudc_device *alloc_vudc_device(int devid)
+{
+	struct vudc_device *udc_dev = NULL;
+
+	udc_dev = kzalloc(sizeof(*udc_dev), GFP_KERNEL);
+	if (!udc_dev)
+		goto out;
+
+	INIT_LIST_HEAD(&udc_dev->dev_entry);
+
+	udc_dev->pdev = platform_device_alloc(GADGET_NAME, devid);
+	if (!udc_dev->pdev) {
+		kfree(udc_dev);
+		udc_dev = NULL;
+	}
+
+out:
+	return udc_dev;
+}
+
+void put_vudc_device(struct vudc_device *udc_dev)
+{
+	platform_device_put(udc_dev->pdev);
+	kfree(udc_dev);
+}
+
+static int init_vudc_hw(struct vudc *udc)
+{
+	int i;
+	struct usbip_device *ud = &udc->ud;
+	struct vep *ep;
+
+	udc->ep = kcalloc(VIRTUAL_ENDPOINTS, sizeof(*udc->ep), GFP_KERNEL);
+	if (!udc->ep)
+		goto nomem_ep;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+
+	/* create ep0 and 15 in, 15 out general purpose eps */
+	for (i = 0; i < VIRTUAL_ENDPOINTS; ++i) {
+		int is_out = i % 2;
+		int num = (i + 1) / 2;
+
+		ep = &udc->ep[i];
+
+		sprintf(ep->name, "ep%d%s", num,
+			i ? (is_out ? "out" : "in") : "");
+		ep->ep.name = ep->name;
+
+		ep->ep.ops = &vep_ops;
+
+		usb_ep_set_maxpacket_limit(&ep->ep, ~0);
+		ep->ep.max_streams = 16;
+		ep->gadget = &udc->gadget;
+		INIT_LIST_HEAD(&ep->req_queue);
+
+		if (i == 0) {
+			/* ep0 */
+			ep->ep.caps.type_control = true;
+			ep->ep.caps.dir_out = true;
+			ep->ep.caps.dir_in = true;
+
+			udc->gadget.ep0 = &ep->ep;
+		} else {
+			/* All other eps */
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_int = true;
+			ep->ep.caps.type_bulk = true;
+
+			if (is_out)
+				ep->ep.caps.dir_out = true;
+			else
+				ep->ep.caps.dir_in = true;
+
+			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+		}
+	}
+
+	spin_lock_init(&udc->lock);
+	spin_lock_init(&udc->lock_tx);
+	INIT_LIST_HEAD(&udc->urb_queue);
+	INIT_LIST_HEAD(&udc->tx_queue);
+	init_waitqueue_head(&udc->tx_waitq);
+
+	spin_lock_init(&ud->lock);
+	mutex_init(&ud->sysfs_lock);
+	ud->status = SDEV_ST_AVAILABLE;
+	ud->side = USBIP_VUDC;
+
+	ud->eh_ops.shutdown = vudc_shutdown;
+	ud->eh_ops.reset    = vudc_device_reset;
+	ud->eh_ops.unusable = vudc_device_unusable;
+
+	v_init_timer(udc);
+	return 0;
+
+nomem_ep:
+		return -ENOMEM;
+}
+
+static void cleanup_vudc_hw(struct vudc *udc)
+{
+	kfree(udc->ep);
+}
+
+/* platform driver ops */
+
+int vudc_probe(struct platform_device *pdev)
+{
+	struct vudc *udc;
+	int ret = -ENOMEM;
+
+	udc = kzalloc(sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		goto out;
+
+	udc->gadget.name = GADGET_NAME;
+	udc->gadget.ops = &vgadget_ops;
+	udc->gadget.max_speed = USB_SPEED_HIGH;
+	udc->gadget.dev.parent = &pdev->dev;
+	udc->pdev = pdev;
+
+	ret = init_vudc_hw(udc);
+	if (ret)
+		goto err_init_vudc_hw;
+
+	ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
+	if (ret < 0)
+		goto err_add_udc;
+
+	platform_set_drvdata(pdev, udc);
+
+	return ret;
+
+err_add_udc:
+	cleanup_vudc_hw(udc);
+err_init_vudc_hw:
+	kfree(udc);
+out:
+	return ret;
+}
+
+int vudc_remove(struct platform_device *pdev)
+{
+	struct vudc *udc = platform_get_drvdata(pdev);
+
+	usb_del_gadget_udc(&udc->gadget);
+	cleanup_vudc_hw(udc);
+	kfree(udc);
+	return 0;
+}
diff --git a/drivers/usb/usbip/vudc_main.c b/drivers/usb/usbip/vudc_main.c
new file mode 100644
index 000000000..993e721cb
--- /dev/null
+++ b/drivers/usb/usbip/vudc_main.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Karol Kosik <karo9@interia.eu>
+ * Copyright (C) 2015-2016 Samsung Electronics
+ *               Igor Kotrasinski <i.kotrasinsk@samsung.com>
+ *               Krzysztof Opasiak <k.opasiak@samsung.com>
+ */
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/module.h>
+
+#include "vudc.h"
+
+static unsigned int vudc_number = 1;
+
+module_param_named(num, vudc_number, uint, S_IRUGO);
+MODULE_PARM_DESC(num, "number of emulated controllers");
+
+static struct platform_driver vudc_driver = {
+	.probe		= vudc_probe,
+	.remove		= vudc_remove,
+	.driver		= {
+		.name	= GADGET_NAME,
+		.dev_groups = vudc_groups,
+	},
+};
+
+static LIST_HEAD(vudc_devices);
+
+static int __init vudc_init(void)
+{
+	int retval = -ENOMEM;
+	int i;
+	struct vudc_device *udc_dev = NULL, *udc_dev2 = NULL;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	if (vudc_number < 1) {
+		pr_err("Number of emulated UDC must be no less than 1");
+		return -EINVAL;
+	}
+
+	retval = platform_driver_register(&vudc_driver);
+	if (retval < 0)
+		goto out;
+
+	for (i = 0; i < vudc_number; i++) {
+		udc_dev = alloc_vudc_device(i);
+		if (!udc_dev) {
+			retval = -ENOMEM;
+			goto cleanup;
+		}
+
+		retval = platform_device_add(udc_dev->pdev);
+		if (retval < 0) {
+			put_vudc_device(udc_dev);
+			goto cleanup;
+		}
+
+		list_add_tail(&udc_dev->dev_entry, &vudc_devices);
+		if (!platform_get_drvdata(udc_dev->pdev)) {
+			/*
+			 * The udc was added successfully but its probe
+			 * function failed for some reason.
+			 */
+			retval = -EINVAL;
+			goto cleanup;
+		}
+	}
+	goto out;
+
+cleanup:
+	list_for_each_entry_safe(udc_dev, udc_dev2, &vudc_devices, dev_entry) {
+		list_del(&udc_dev->dev_entry);
+		/*
+		 * Just do platform_device_del() here, put_vudc_device()
+		 * calls the platform_device_put()
+		 */
+		platform_device_del(udc_dev->pdev);
+		put_vudc_device(udc_dev);
+	}
+
+	platform_driver_unregister(&vudc_driver);
+out:
+	return retval;
+}
+module_init(vudc_init);
+
+static void __exit vudc_cleanup(void)
+{
+	struct vudc_device *udc_dev = NULL, *udc_dev2 = NULL;
+
+	list_for_each_entry_safe(udc_dev, udc_dev2, &vudc_devices, dev_entry) {
+		list_del(&udc_dev->dev_entry);
+		/*
+		 * Just do platform_device_del() here, put_vudc_device()
+		 * calls the platform_device_put()
+		 */
+		platform_device_del(udc_dev->pdev);
+		put_vudc_device(udc_dev);
+	}
+	platform_driver_unregister(&vudc_driver);
+}
+module_exit(vudc_cleanup);
+
+MODULE_DESCRIPTION("USB over IP Device Controller");
+MODULE_AUTHOR("Krzysztof Opasiak, Karol Kosik, Igor Kotrasinski");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/usbip/vudc_rx.c b/drivers/usb/usbip/vudc_rx.c
new file mode 100644
index 000000000..d4a2f30a7
--- /dev/null
+++ b/drivers/usb/usbip/vudc_rx.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Karol Kosik <karo9@interia.eu>
+ * Copyright (C) 2015-2016 Samsung Electronics
+ *               Igor Kotrasinski <i.kotrasinsk@samsung.com>
+ */
+
+#include <net/sock.h>
+#include <linux/list.h>
+#include <linux/kthread.h>
+
+#include "usbip_common.h"
+#include "vudc.h"
+
+static int alloc_urb_from_cmd(struct urb **urbp,
+			      struct usbip_header *pdu, u8 type)
+{
+	struct urb *urb;
+
+	if (type == USB_ENDPOINT_XFER_ISOC)
+		urb = usb_alloc_urb(pdu->u.cmd_submit.number_of_packets,
+					  GFP_KERNEL);
+	else
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+
+	if (!urb)
+		goto err;
+
+	usbip_pack_pdu(pdu, urb, USBIP_CMD_SUBMIT, 0);
+
+	if (urb->transfer_buffer_length > 0) {
+		urb->transfer_buffer = kzalloc(urb->transfer_buffer_length,
+			GFP_KERNEL);
+		if (!urb->transfer_buffer)
+			goto free_urb;
+	}
+
+	urb->setup_packet = kmemdup(&pdu->u.cmd_submit.setup, 8,
+			    GFP_KERNEL);
+	if (!urb->setup_packet)
+		goto free_buffer;
+
+	/*
+	 * FIXME - we only setup pipe enough for usbip functions
+	 * to behave nicely
+	 */
+	urb->pipe |= pdu->base.direction == USBIP_DIR_IN ?
+			USB_DIR_IN : USB_DIR_OUT;
+
+	*urbp = urb;
+	return 0;
+
+free_buffer:
+	kfree(urb->transfer_buffer);
+	urb->transfer_buffer = NULL;
+free_urb:
+	usb_free_urb(urb);
+err:
+	return -ENOMEM;
+}
+
+static int v_recv_cmd_unlink(struct vudc *udc,
+				struct usbip_header *pdu)
+{
+	unsigned long flags;
+	struct urbp *urb_p;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	list_for_each_entry(urb_p, &udc->urb_queue, urb_entry) {
+		if (urb_p->seqnum != pdu->u.cmd_unlink.seqnum)
+			continue;
+		urb_p->urb->unlinked = -ECONNRESET;
+		urb_p->seqnum = pdu->base.seqnum;
+		v_kick_timer(udc, jiffies);
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return 0;
+	}
+	/* Not found, completed / not queued */
+	spin_lock(&udc->lock_tx);
+	v_enqueue_ret_unlink(udc, pdu->base.seqnum, 0);
+	wake_up(&udc->tx_waitq);
+	spin_unlock(&udc->lock_tx);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int v_recv_cmd_submit(struct vudc *udc,
+				 struct usbip_header *pdu)
+{
+	int ret = 0;
+	struct urbp *urb_p;
+	u8 address;
+	unsigned long flags;
+
+	urb_p = alloc_urbp();
+	if (!urb_p) {
+		usbip_event_add(&udc->ud, VUDC_EVENT_ERROR_MALLOC);
+		return -ENOMEM;
+	}
+
+	/* base.ep is pipeendpoint(pipe) */
+	address = pdu->base.ep;
+	if (pdu->base.direction == USBIP_DIR_IN)
+		address |= USB_DIR_IN;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	urb_p->ep = vudc_find_endpoint(udc, address);
+	if (!urb_p->ep) {
+		/* we don't know the type, there may be isoc data! */
+		dev_err(&udc->pdev->dev, "request to nonexistent endpoint");
+		spin_unlock_irqrestore(&udc->lock, flags);
+		usbip_event_add(&udc->ud, VUDC_EVENT_ERROR_TCP);
+		ret = -EPIPE;
+		goto free_urbp;
+	}
+	urb_p->type = urb_p->ep->type;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	urb_p->new = 1;
+	urb_p->seqnum = pdu->base.seqnum;
+
+	if (urb_p->ep->type == USB_ENDPOINT_XFER_ISOC) {
+		/* validate packet size and number of packets */
+		unsigned int maxp, packets, bytes;
+
+		maxp = usb_endpoint_maxp(urb_p->ep->desc);
+		maxp *= usb_endpoint_maxp_mult(urb_p->ep->desc);
+		bytes = pdu->u.cmd_submit.transfer_buffer_length;
+		packets = DIV_ROUND_UP(bytes, maxp);
+
+		if (pdu->u.cmd_submit.number_of_packets < 0 ||
+		    pdu->u.cmd_submit.number_of_packets > packets) {
+			dev_err(&udc->gadget.dev,
+				"CMD_SUBMIT: isoc invalid num packets %d\n",
+				pdu->u.cmd_submit.number_of_packets);
+			ret = -EMSGSIZE;
+			goto free_urbp;
+		}
+	}
+
+	ret = alloc_urb_from_cmd(&urb_p->urb, pdu, urb_p->ep->type);
+	if (ret) {
+		usbip_event_add(&udc->ud, VUDC_EVENT_ERROR_MALLOC);
+		ret = -ENOMEM;
+		goto free_urbp;
+	}
+
+	urb_p->urb->status = -EINPROGRESS;
+
+	/* FIXME: more pipe setup to please usbip_common */
+	urb_p->urb->pipe &= ~(3 << 30);
+	switch (urb_p->ep->type) {
+	case USB_ENDPOINT_XFER_BULK:
+		urb_p->urb->pipe |= (PIPE_BULK << 30);
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		urb_p->urb->pipe |= (PIPE_INTERRUPT << 30);
+		break;
+	case USB_ENDPOINT_XFER_CONTROL:
+		urb_p->urb->pipe |= (PIPE_CONTROL << 30);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		urb_p->urb->pipe |= (PIPE_ISOCHRONOUS << 30);
+		break;
+	}
+	ret = usbip_recv_xbuff(&udc->ud, urb_p->urb);
+	if (ret < 0)
+		goto free_urbp;
+
+	ret = usbip_recv_iso(&udc->ud, urb_p->urb);
+	if (ret < 0)
+		goto free_urbp;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	v_kick_timer(udc, jiffies);
+	list_add_tail(&urb_p->urb_entry, &udc->urb_queue);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+
+free_urbp:
+	free_urbp_and_urb(urb_p);
+	return ret;
+}
+
+static int v_rx_pdu(struct usbip_device *ud)
+{
+	int ret;
+	struct usbip_header pdu;
+	struct vudc *udc = container_of(ud, struct vudc, ud);
+
+	memset(&pdu, 0, sizeof(pdu));
+	ret = usbip_recv(ud->tcp_socket, &pdu, sizeof(pdu));
+	if (ret != sizeof(pdu)) {
+		usbip_event_add(ud, VUDC_EVENT_ERROR_TCP);
+		if (ret >= 0)
+			return -EPIPE;
+		return ret;
+	}
+	usbip_header_correct_endian(&pdu, 0);
+
+	spin_lock_irq(&ud->lock);
+	ret = (ud->status == SDEV_ST_USED);
+	spin_unlock_irq(&ud->lock);
+	if (!ret) {
+		usbip_event_add(ud, VUDC_EVENT_ERROR_TCP);
+		return -EBUSY;
+	}
+
+	switch (pdu.base.command) {
+	case USBIP_CMD_UNLINK:
+		ret = v_recv_cmd_unlink(udc, &pdu);
+		break;
+	case USBIP_CMD_SUBMIT:
+		ret = v_recv_cmd_submit(udc, &pdu);
+		break;
+	default:
+		ret = -EPIPE;
+		pr_err("rx: unknown command");
+		break;
+	}
+	return ret;
+}
+
+int v_rx_loop(void *data)
+{
+	struct usbip_device *ud = data;
+	int ret = 0;
+
+	while (!kthread_should_stop()) {
+		if (usbip_event_happened(ud))
+			break;
+		ret = v_rx_pdu(ud);
+		if (ret < 0) {
+			pr_warn("v_rx exit with error %d", ret);
+			break;
+		}
+	}
+	return ret;
+}
diff --git a/drivers/usb/usbip/vudc_sysfs.c b/drivers/usb/usbip/vudc_sysfs.c
new file mode 100644
index 000000000..c95e6b2bf
--- /dev/null
+++ b/drivers/usb/usbip/vudc_sysfs.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Karol Kosik <karo9@interia.eu>
+ * Copyright (C) 2015-2016 Samsung Electronics
+ *               Igor Kotrasinski <i.kotrasinsk@samsung.com>
+ *               Krzysztof Opasiak <k.opasiak@samsung.com>
+ */
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/ch9.h>
+#include <linux/sysfs.h>
+#include <linux/kthread.h>
+#include <linux/byteorder/generic.h>
+
+#include "usbip_common.h"
+#include "vudc.h"
+
+#include <net/sock.h>
+
+/* called with udc->lock held */
+int get_gadget_descs(struct vudc *udc)
+{
+	struct vrequest *usb_req;
+	struct vep *ep0 = to_vep(udc->gadget.ep0);
+	struct usb_device_descriptor *ddesc = &udc->dev_desc;
+	struct usb_ctrlrequest req;
+	int ret;
+
+	if (!udc->driver || !udc->pullup)
+		return -EINVAL;
+
+	req.bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE;
+	req.bRequest = USB_REQ_GET_DESCRIPTOR;
+	req.wValue = cpu_to_le16(USB_DT_DEVICE << 8);
+	req.wIndex = cpu_to_le16(0);
+	req.wLength = cpu_to_le16(sizeof(*ddesc));
+
+	spin_unlock(&udc->lock);
+	ret = udc->driver->setup(&(udc->gadget), &req);
+	spin_lock(&udc->lock);
+	if (ret < 0)
+		goto out;
+
+	/* assuming request queue is empty; request is now on top */
+	usb_req = list_last_entry(&ep0->req_queue, struct vrequest, req_entry);
+	list_del(&usb_req->req_entry);
+
+	if (usb_req->req.length > sizeof(*ddesc)) {
+		ret = -EOVERFLOW;
+		goto giveback_req;
+	}
+
+	memcpy(ddesc, usb_req->req.buf, sizeof(*ddesc));
+	udc->desc_cached = 1;
+	ret = 0;
+giveback_req:
+	usb_req->req.status = 0;
+	usb_req->req.actual = usb_req->req.length;
+	usb_gadget_giveback_request(&(ep0->ep), &(usb_req->req));
+out:
+	return ret;
+}
+
+/*
+ * Exposes device descriptor from the gadget driver.
+ */
+static ssize_t dev_desc_read(struct file *file, struct kobject *kobj,
+			     struct bin_attribute *attr, char *out,
+			     loff_t off, size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct vudc *udc = (struct vudc *)dev_get_drvdata(dev);
+	char *desc_ptr = (char *) &udc->dev_desc;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (!udc->desc_cached) {
+		ret = -ENODEV;
+		goto unlock;
+	}
+
+	memcpy(out, desc_ptr + off, count);
+	ret = count;
+unlock:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return ret;
+}
+static BIN_ATTR_RO(dev_desc, sizeof(struct usb_device_descriptor));
+
+static ssize_t usbip_sockfd_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *in, size_t count)
+{
+	struct vudc *udc = (struct vudc *) dev_get_drvdata(dev);
+	int rv;
+	int sockfd = 0;
+	int err;
+	struct socket *socket;
+	unsigned long flags;
+	int ret;
+	struct task_struct *tcp_rx = NULL;
+	struct task_struct *tcp_tx = NULL;
+
+	rv = kstrtoint(in, 0, &sockfd);
+	if (rv != 0)
+		return -EINVAL;
+
+	if (!udc) {
+		dev_err(dev, "no device");
+		return -ENODEV;
+	}
+	mutex_lock(&udc->ud.sysfs_lock);
+	spin_lock_irqsave(&udc->lock, flags);
+	/* Don't export what we don't have */
+	if (!udc->driver || !udc->pullup) {
+		dev_err(dev, "gadget not bound");
+		ret = -ENODEV;
+		goto unlock;
+	}
+
+	if (sockfd != -1) {
+		if (udc->connected) {
+			dev_err(dev, "Device already connected");
+			ret = -EBUSY;
+			goto unlock;
+		}
+
+		spin_lock(&udc->ud.lock);
+
+		if (udc->ud.status != SDEV_ST_AVAILABLE) {
+			ret = -EINVAL;
+			goto unlock_ud;
+		}
+
+		socket = sockfd_lookup(sockfd, &err);
+		if (!socket) {
+			dev_err(dev, "failed to lookup sock");
+			ret = -EINVAL;
+			goto unlock_ud;
+		}
+
+		if (socket->type != SOCK_STREAM) {
+			dev_err(dev, "Expecting SOCK_STREAM - found %d",
+				socket->type);
+			ret = -EINVAL;
+			goto sock_err;
+		}
+
+		/* unlock and create threads and get tasks */
+		spin_unlock(&udc->ud.lock);
+		spin_unlock_irqrestore(&udc->lock, flags);
+
+		tcp_rx = kthread_create(&v_rx_loop, &udc->ud, "vudc_rx");
+		if (IS_ERR(tcp_rx)) {
+			sockfd_put(socket);
+			mutex_unlock(&udc->ud.sysfs_lock);
+			return -EINVAL;
+		}
+		tcp_tx = kthread_create(&v_tx_loop, &udc->ud, "vudc_tx");
+		if (IS_ERR(tcp_tx)) {
+			kthread_stop(tcp_rx);
+			sockfd_put(socket);
+			mutex_unlock(&udc->ud.sysfs_lock);
+			return -EINVAL;
+		}
+
+		/* get task structs now */
+		get_task_struct(tcp_rx);
+		get_task_struct(tcp_tx);
+
+		/* lock and update udc->ud state */
+		spin_lock_irqsave(&udc->lock, flags);
+		spin_lock(&udc->ud.lock);
+
+		udc->ud.tcp_socket = socket;
+		udc->ud.tcp_rx = tcp_rx;
+		udc->ud.tcp_tx = tcp_tx;
+		udc->ud.status = SDEV_ST_USED;
+
+		spin_unlock(&udc->ud.lock);
+
+		ktime_get_ts64(&udc->start_time);
+		v_start_timer(udc);
+		udc->connected = 1;
+
+		spin_unlock_irqrestore(&udc->lock, flags);
+
+		wake_up_process(udc->ud.tcp_rx);
+		wake_up_process(udc->ud.tcp_tx);
+
+		mutex_unlock(&udc->ud.sysfs_lock);
+		return count;
+
+	} else {
+		if (!udc->connected) {
+			dev_err(dev, "Device not connected");
+			ret = -EINVAL;
+			goto unlock;
+		}
+
+		spin_lock(&udc->ud.lock);
+		if (udc->ud.status != SDEV_ST_USED) {
+			ret = -EINVAL;
+			goto unlock_ud;
+		}
+		spin_unlock(&udc->ud.lock);
+
+		usbip_event_add(&udc->ud, VUDC_EVENT_DOWN);
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	mutex_unlock(&udc->ud.sysfs_lock);
+
+	return count;
+
+sock_err:
+	sockfd_put(socket);
+unlock_ud:
+	spin_unlock(&udc->ud.lock);
+unlock:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	mutex_unlock(&udc->ud.sysfs_lock);
+
+	return ret;
+}
+static DEVICE_ATTR_WO(usbip_sockfd);
+
+static ssize_t usbip_status_show(struct device *dev,
+			       struct device_attribute *attr, char *out)
+{
+	struct vudc *udc = (struct vudc *) dev_get_drvdata(dev);
+	int status;
+
+	if (!udc) {
+		dev_err(dev, "no device");
+		return -ENODEV;
+	}
+	spin_lock_irq(&udc->ud.lock);
+	status = udc->ud.status;
+	spin_unlock_irq(&udc->ud.lock);
+
+	return snprintf(out, PAGE_SIZE, "%d\n", status);
+}
+static DEVICE_ATTR_RO(usbip_status);
+
+static struct attribute *dev_attrs[] = {
+	&dev_attr_usbip_sockfd.attr,
+	&dev_attr_usbip_status.attr,
+	NULL,
+};
+
+static struct bin_attribute *dev_bin_attrs[] = {
+	&bin_attr_dev_desc,
+	NULL,
+};
+
+static const struct attribute_group vudc_attr_group = {
+	.attrs = dev_attrs,
+	.bin_attrs = dev_bin_attrs,
+};
+
+const struct attribute_group *vudc_groups[] = {
+	&vudc_attr_group,
+	NULL,
+};
diff --git a/drivers/usb/usbip/vudc_transfer.c b/drivers/usb/usbip/vudc_transfer.c
new file mode 100644
index 000000000..7e801fee3
--- /dev/null
+++ b/drivers/usb/usbip/vudc_transfer.c
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Karol Kosik <karo9@interia.eu>
+ * Copyright (C) 2015-2016 Samsung Electronics
+ *               Igor Kotrasinski <i.kotrasinsk@samsung.com>
+ *
+ * Based on dummy_hcd.c, which is:
+ * Copyright (C) 2003 David Brownell
+ * Copyright (C) 2003-2005 Alan Stern
+ */
+
+#include <linux/usb.h>
+#include <linux/timer.h>
+#include <linux/usb/ch9.h>
+
+#include "vudc.h"
+
+#define DEV_REQUEST	(USB_TYPE_STANDARD | USB_RECIP_DEVICE)
+#define DEV_INREQUEST	(DEV_REQUEST | USB_DIR_IN)
+#define INTF_REQUEST	(USB_TYPE_STANDARD | USB_RECIP_INTERFACE)
+#define INTF_INREQUEST	(INTF_REQUEST | USB_DIR_IN)
+#define EP_REQUEST	(USB_TYPE_STANDARD | USB_RECIP_ENDPOINT)
+#define EP_INREQUEST	(EP_REQUEST | USB_DIR_IN)
+
+static int get_frame_limit(enum usb_device_speed speed)
+{
+	switch (speed) {
+	case USB_SPEED_LOW:
+		return 8 /*bytes*/ * 12 /*packets*/;
+	case USB_SPEED_FULL:
+		return 64 /*bytes*/ * 19 /*packets*/;
+	case USB_SPEED_HIGH:
+		return 512 /*bytes*/ * 13 /*packets*/ * 8 /*uframes*/;
+	case USB_SPEED_SUPER:
+		/* Bus speed is 500000 bytes/ms, so use a little less */
+		return 490000;
+	default:
+		/* error */
+		return -1;
+	}
+
+}
+
+/*
+ * handle_control_request() - handles all control transfers
+ * @udc: pointer to vudc
+ * @urb: the urb request to handle
+ * @setup: pointer to the setup data for a USB device control
+ *	 request
+ * @status: pointer to request handling status
+ *
+ * Return 0 - if the request was handled
+ *	  1 - if the request wasn't handles
+ *	  error code on error
+ *
+ * Adapted from drivers/usb/gadget/udc/dummy_hcd.c
+ */
+static int handle_control_request(struct vudc *udc, struct urb *urb,
+				  struct usb_ctrlrequest *setup,
+				  int *status)
+{
+	struct vep	*ep2;
+	int		ret_val = 1;
+	unsigned int	w_index;
+	unsigned int	w_value;
+
+	w_index = le16_to_cpu(setup->wIndex);
+	w_value = le16_to_cpu(setup->wValue);
+	switch (setup->bRequest) {
+	case USB_REQ_SET_ADDRESS:
+		if (setup->bRequestType != DEV_REQUEST)
+			break;
+		udc->address = w_value;
+		ret_val = 0;
+		*status = 0;
+		break;
+	case USB_REQ_SET_FEATURE:
+		if (setup->bRequestType == DEV_REQUEST) {
+			ret_val = 0;
+			switch (w_value) {
+			case USB_DEVICE_REMOTE_WAKEUP:
+				break;
+			case USB_DEVICE_B_HNP_ENABLE:
+				udc->gadget.b_hnp_enable = 1;
+				break;
+			case USB_DEVICE_A_HNP_SUPPORT:
+				udc->gadget.a_hnp_support = 1;
+				break;
+			case USB_DEVICE_A_ALT_HNP_SUPPORT:
+				udc->gadget.a_alt_hnp_support = 1;
+				break;
+			default:
+				ret_val = -EOPNOTSUPP;
+			}
+			if (ret_val == 0) {
+				udc->devstatus |= (1 << w_value);
+				*status = 0;
+			}
+		} else if (setup->bRequestType == EP_REQUEST) {
+			/* endpoint halt */
+			ep2 = vudc_find_endpoint(udc, w_index);
+			if (!ep2 || ep2->ep.name == udc->ep[0].ep.name) {
+				ret_val = -EOPNOTSUPP;
+				break;
+			}
+			ep2->halted = 1;
+			ret_val = 0;
+			*status = 0;
+		}
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+		if (setup->bRequestType == DEV_REQUEST) {
+			ret_val = 0;
+			switch (w_value) {
+			case USB_DEVICE_REMOTE_WAKEUP:
+				w_value = USB_DEVICE_REMOTE_WAKEUP;
+				break;
+
+			case USB_DEVICE_U1_ENABLE:
+			case USB_DEVICE_U2_ENABLE:
+			case USB_DEVICE_LTM_ENABLE:
+				ret_val = -EOPNOTSUPP;
+				break;
+			default:
+				ret_val = -EOPNOTSUPP;
+				break;
+			}
+			if (ret_val == 0) {
+				udc->devstatus &= ~(1 << w_value);
+				*status = 0;
+			}
+		} else if (setup->bRequestType == EP_REQUEST) {
+			/* endpoint halt */
+			ep2 = vudc_find_endpoint(udc, w_index);
+			if (!ep2) {
+				ret_val = -EOPNOTSUPP;
+				break;
+			}
+			if (!ep2->wedged)
+				ep2->halted = 0;
+			ret_val = 0;
+			*status = 0;
+		}
+		break;
+	case USB_REQ_GET_STATUS:
+		if (setup->bRequestType == DEV_INREQUEST
+				|| setup->bRequestType == INTF_INREQUEST
+				|| setup->bRequestType == EP_INREQUEST) {
+			char *buf;
+			/*
+			 * device: remote wakeup, selfpowered
+			 * interface: nothing
+			 * endpoint: halt
+			 */
+			buf = (char *)urb->transfer_buffer;
+			if (urb->transfer_buffer_length > 0) {
+				if (setup->bRequestType == EP_INREQUEST) {
+					ep2 = vudc_find_endpoint(udc, w_index);
+					if (!ep2) {
+						ret_val = -EOPNOTSUPP;
+						break;
+					}
+					buf[0] = ep2->halted;
+				} else if (setup->bRequestType ==
+					   DEV_INREQUEST) {
+					buf[0] = (u8)udc->devstatus;
+				} else
+					buf[0] = 0;
+			}
+			if (urb->transfer_buffer_length > 1)
+				buf[1] = 0;
+			urb->actual_length = min_t(u32, 2,
+				urb->transfer_buffer_length);
+			ret_val = 0;
+			*status = 0;
+		}
+		break;
+	}
+	return ret_val;
+}
+
+/* Adapted from dummy_hcd.c ; caller must hold lock */
+static int transfer(struct vudc *udc,
+		struct urb *urb, struct vep *ep, int limit)
+{
+	struct vrequest	*req;
+	int sent = 0;
+top:
+	/* if there's no request queued, the device is NAKing; return */
+	list_for_each_entry(req, &ep->req_queue, req_entry) {
+		unsigned int	host_len, dev_len, len;
+		void		*ubuf_pos, *rbuf_pos;
+		int		is_short, to_host;
+		int		rescan = 0;
+
+		/*
+		 * 1..N packets of ep->ep.maxpacket each ... the last one
+		 * may be short (including zero length).
+		 *
+		 * writer can send a zlp explicitly (length 0) or implicitly
+		 * (length mod maxpacket zero, and 'zero' flag); they always
+		 * terminate reads.
+		 */
+		host_len = urb->transfer_buffer_length - urb->actual_length;
+		dev_len = req->req.length - req->req.actual;
+		len = min(host_len, dev_len);
+
+		to_host = usb_pipein(urb->pipe);
+		if (unlikely(len == 0))
+			is_short = 1;
+		else {
+			/* send multiple of maxpacket first, then remainder */
+			if (len >= ep->ep.maxpacket) {
+				is_short = 0;
+				if (len % ep->ep.maxpacket > 0)
+					rescan = 1;
+				len -= len % ep->ep.maxpacket;
+			} else {
+				is_short = 1;
+			}
+
+			ubuf_pos = urb->transfer_buffer + urb->actual_length;
+			rbuf_pos = req->req.buf + req->req.actual;
+
+			if (urb->pipe & USB_DIR_IN)
+				memcpy(ubuf_pos, rbuf_pos, len);
+			else
+				memcpy(rbuf_pos, ubuf_pos, len);
+
+			urb->actual_length += len;
+			req->req.actual += len;
+			sent += len;
+		}
+
+		/*
+		 * short packets terminate, maybe with overflow/underflow.
+		 * it's only really an error to write too much.
+		 *
+		 * partially filling a buffer optionally blocks queue advances
+		 * (so completion handlers can clean up the queue) but we don't
+		 * need to emulate such data-in-flight.
+		 */
+		if (is_short) {
+			if (host_len == dev_len) {
+				req->req.status = 0;
+				urb->status = 0;
+			} else if (to_host) {
+				req->req.status = 0;
+				if (dev_len > host_len)
+					urb->status = -EOVERFLOW;
+				else
+					urb->status = 0;
+			} else {
+				urb->status = 0;
+				if (host_len > dev_len)
+					req->req.status = -EOVERFLOW;
+				else
+					req->req.status = 0;
+			}
+
+		/* many requests terminate without a short packet */
+		/* also check if we need to send zlp */
+		} else {
+			if (req->req.length == req->req.actual) {
+				if (req->req.zero && to_host)
+					rescan = 1;
+				else
+					req->req.status = 0;
+			}
+			if (urb->transfer_buffer_length == urb->actual_length) {
+				if (urb->transfer_flags & URB_ZERO_PACKET &&
+				    !to_host)
+					rescan = 1;
+				else
+					urb->status = 0;
+			}
+		}
+
+		/* device side completion --> continuable */
+		if (req->req.status != -EINPROGRESS) {
+
+			list_del_init(&req->req_entry);
+			spin_unlock(&udc->lock);
+			usb_gadget_giveback_request(&ep->ep, &req->req);
+			spin_lock(&udc->lock);
+
+			/* requests might have been unlinked... */
+			rescan = 1;
+		}
+
+		/* host side completion --> terminate */
+		if (urb->status != -EINPROGRESS)
+			break;
+
+		/* rescan to continue with any other queued i/o */
+		if (rescan)
+			goto top;
+	}
+	return sent;
+}
+
+static void v_timer(struct timer_list *t)
+{
+	struct vudc *udc = from_timer(udc, t, tr_timer.timer);
+	struct transfer_timer *timer = &udc->tr_timer;
+	struct urbp *urb_p, *tmp;
+	unsigned long flags;
+	struct usb_ep *_ep;
+	struct vep *ep;
+	int ret = 0;
+	int total, limit;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	total = get_frame_limit(udc->gadget.speed);
+	if (total < 0) {	/* unknown speed, or not set yet */
+		timer->state = VUDC_TR_IDLE;
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return;
+	}
+	/* is it next frame now? */
+	if (time_after(jiffies, timer->frame_start + msecs_to_jiffies(1))) {
+		timer->frame_limit = total;
+		/* FIXME: how to make it accurate? */
+		timer->frame_start = jiffies;
+	} else {
+		total = timer->frame_limit;
+	}
+
+	/* We have to clear ep0 flags separately as it's not on the list */
+	udc->ep[0].already_seen = 0;
+	list_for_each_entry(_ep, &udc->gadget.ep_list, ep_list) {
+		ep = to_vep(_ep);
+		ep->already_seen = 0;
+	}
+
+restart:
+	list_for_each_entry_safe(urb_p, tmp, &udc->urb_queue, urb_entry) {
+		struct urb *urb = urb_p->urb;
+
+		ep = urb_p->ep;
+		if (urb->unlinked)
+			goto return_urb;
+		if (timer->state != VUDC_TR_RUNNING)
+			continue;
+
+		if (!ep) {
+			urb->status = -EPROTO;
+			goto return_urb;
+		}
+
+		/* Used up bandwidth? */
+		if (total <= 0 && ep->type == USB_ENDPOINT_XFER_BULK)
+			continue;
+
+		if (ep->already_seen)
+			continue;
+		ep->already_seen = 1;
+		if (ep == &udc->ep[0] && urb_p->new) {
+			ep->setup_stage = 1;
+			urb_p->new = 0;
+		}
+		if (ep->halted && !ep->setup_stage) {
+			urb->status = -EPIPE;
+			goto return_urb;
+		}
+
+		if (ep == &udc->ep[0] && ep->setup_stage) {
+			/* TODO - flush any stale requests */
+			ep->setup_stage = 0;
+			ep->halted = 0;
+
+			ret = handle_control_request(udc, urb,
+				(struct usb_ctrlrequest *) urb->setup_packet,
+				(&urb->status));
+			if (ret > 0) {
+				spin_unlock(&udc->lock);
+				ret = udc->driver->setup(&udc->gadget,
+					(struct usb_ctrlrequest *)
+					urb->setup_packet);
+				spin_lock(&udc->lock);
+			}
+			if (ret >= 0) {
+				/* no delays (max 64kb data stage) */
+				limit = 64 * 1024;
+				goto treat_control_like_bulk;
+			} else {
+				urb->status = -EPIPE;
+				urb->actual_length = 0;
+				goto return_urb;
+			}
+		}
+
+		limit = total;
+		switch (ep->type) {
+		case USB_ENDPOINT_XFER_ISOC:
+			/* TODO: support */
+			urb->status = -EXDEV;
+			break;
+
+		case USB_ENDPOINT_XFER_INT:
+			/*
+			 * TODO: figure out bandwidth guarantees
+			 * for now, give unlimited bandwidth
+			 */
+			limit += urb->transfer_buffer_length;
+			fallthrough;
+		default:
+treat_control_like_bulk:
+			total -= transfer(udc, urb, ep, limit);
+		}
+		if (urb->status == -EINPROGRESS)
+			continue;
+
+return_urb:
+		if (ep)
+			ep->already_seen = ep->setup_stage = 0;
+
+		spin_lock(&udc->lock_tx);
+		list_del(&urb_p->urb_entry);
+		if (!urb->unlinked) {
+			v_enqueue_ret_submit(udc, urb_p);
+		} else {
+			v_enqueue_ret_unlink(udc, urb_p->seqnum,
+					     urb->unlinked);
+			free_urbp_and_urb(urb_p);
+		}
+		wake_up(&udc->tx_waitq);
+		spin_unlock(&udc->lock_tx);
+
+		goto restart;
+	}
+
+	/* TODO - also wait on empty usb_request queues? */
+	if (list_empty(&udc->urb_queue))
+		timer->state = VUDC_TR_IDLE;
+	else
+		mod_timer(&timer->timer,
+			  timer->frame_start + msecs_to_jiffies(1));
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+/* All timer functions are run with udc->lock held */
+
+void v_init_timer(struct vudc *udc)
+{
+	struct transfer_timer *t = &udc->tr_timer;
+
+	timer_setup(&t->timer, v_timer, 0);
+	t->state = VUDC_TR_STOPPED;
+}
+
+void v_start_timer(struct vudc *udc)
+{
+	struct transfer_timer *t = &udc->tr_timer;
+
+	dev_dbg(&udc->pdev->dev, "timer start");
+	switch (t->state) {
+	case VUDC_TR_RUNNING:
+		return;
+	case VUDC_TR_IDLE:
+		return v_kick_timer(udc, jiffies);
+	case VUDC_TR_STOPPED:
+		t->state = VUDC_TR_IDLE;
+		t->frame_start = jiffies;
+		t->frame_limit = get_frame_limit(udc->gadget.speed);
+		return v_kick_timer(udc, jiffies);
+	}
+}
+
+void v_kick_timer(struct vudc *udc, unsigned long time)
+{
+	struct transfer_timer *t = &udc->tr_timer;
+
+	dev_dbg(&udc->pdev->dev, "timer kick");
+	switch (t->state) {
+	case VUDC_TR_RUNNING:
+		return;
+	case VUDC_TR_IDLE:
+		t->state = VUDC_TR_RUNNING;
+		fallthrough;
+	case VUDC_TR_STOPPED:
+		/* we may want to kick timer to unqueue urbs */
+		mod_timer(&t->timer, time);
+	}
+}
+
+void v_stop_timer(struct vudc *udc)
+{
+	struct transfer_timer *t = &udc->tr_timer;
+
+	/* timer itself will take care of stopping */
+	dev_dbg(&udc->pdev->dev, "timer stop");
+	t->state = VUDC_TR_STOPPED;
+}
diff --git a/drivers/usb/usbip/vudc_tx.c b/drivers/usb/usbip/vudc_tx.c
new file mode 100644
index 000000000..3ccb17c3e
--- /dev/null
+++ b/drivers/usb/usbip/vudc_tx.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Karol Kosik <karo9@interia.eu>
+ * Copyright (C) 2015-2016 Samsung Electronics
+ *               Igor Kotrasinski <i.kotrasinsk@samsung.com>
+ */
+
+#include <net/sock.h>
+#include <linux/list.h>
+#include <linux/kthread.h>
+
+#include "usbip_common.h"
+#include "vudc.h"
+
+static inline void setup_base_pdu(struct usbip_header_basic *base,
+				  __u32 command, __u32 seqnum)
+{
+	base->command	= command;
+	base->seqnum	= seqnum;
+	base->devid	= 0;
+	base->ep	= 0;
+	base->direction = 0;
+}
+
+static void setup_ret_submit_pdu(struct usbip_header *rpdu, struct urbp *urb_p)
+{
+	setup_base_pdu(&rpdu->base, USBIP_RET_SUBMIT, urb_p->seqnum);
+	usbip_pack_pdu(rpdu, urb_p->urb, USBIP_RET_SUBMIT, 1);
+}
+
+static void setup_ret_unlink_pdu(struct usbip_header *rpdu,
+				 struct v_unlink *unlink)
+{
+	setup_base_pdu(&rpdu->base, USBIP_RET_UNLINK, unlink->seqnum);
+	rpdu->u.ret_unlink.status = unlink->status;
+}
+
+static int v_send_ret_unlink(struct vudc *udc, struct v_unlink *unlink)
+{
+	struct msghdr msg;
+	struct kvec iov[1];
+	size_t txsize;
+
+	int ret;
+	struct usbip_header pdu_header;
+
+	txsize = 0;
+	memset(&pdu_header, 0, sizeof(pdu_header));
+	memset(&msg, 0, sizeof(msg));
+	memset(&iov, 0, sizeof(iov));
+
+	/* 1. setup usbip_header */
+	setup_ret_unlink_pdu(&pdu_header, unlink);
+	usbip_header_correct_endian(&pdu_header, 1);
+
+	iov[0].iov_base = &pdu_header;
+	iov[0].iov_len  = sizeof(pdu_header);
+	txsize += sizeof(pdu_header);
+
+	ret = kernel_sendmsg(udc->ud.tcp_socket, &msg, iov,
+			     1, txsize);
+	if (ret != txsize) {
+		usbip_event_add(&udc->ud, VUDC_EVENT_ERROR_TCP);
+		if (ret >= 0)
+			return -EPIPE;
+		return ret;
+	}
+	kfree(unlink);
+
+	return txsize;
+}
+
+static int v_send_ret_submit(struct vudc *udc, struct urbp *urb_p)
+{
+	struct urb *urb = urb_p->urb;
+	struct usbip_header pdu_header;
+	struct usbip_iso_packet_descriptor *iso_buffer = NULL;
+	struct kvec *iov = NULL;
+	int iovnum = 0;
+	int ret = 0;
+	size_t txsize;
+	struct msghdr msg;
+
+	txsize = 0;
+	memset(&pdu_header, 0, sizeof(pdu_header));
+	memset(&msg, 0, sizeof(msg));
+
+	if (urb->actual_length > 0 && !urb->transfer_buffer) {
+		dev_err(&udc->gadget.dev,
+			"urb: actual_length %d transfer_buffer null\n",
+			urb->actual_length);
+		return -1;
+	}
+
+	if (urb_p->type == USB_ENDPOINT_XFER_ISOC)
+		iovnum = 2 + urb->number_of_packets;
+	else
+		iovnum = 2;
+
+	iov = kcalloc(iovnum, sizeof(*iov), GFP_KERNEL);
+	if (!iov) {
+		usbip_event_add(&udc->ud, VUDC_EVENT_ERROR_MALLOC);
+		ret = -ENOMEM;
+		goto out;
+	}
+	iovnum = 0;
+
+	/* 1. setup usbip_header */
+	setup_ret_submit_pdu(&pdu_header, urb_p);
+	usbip_dbg_stub_tx("setup txdata seqnum: %d\n",
+			  pdu_header.base.seqnum);
+	usbip_header_correct_endian(&pdu_header, 1);
+
+	iov[iovnum].iov_base = &pdu_header;
+	iov[iovnum].iov_len  = sizeof(pdu_header);
+	iovnum++;
+	txsize += sizeof(pdu_header);
+
+	/* 2. setup transfer buffer */
+	if (urb_p->type != USB_ENDPOINT_XFER_ISOC &&
+	    usb_pipein(urb->pipe) && urb->actual_length > 0) {
+		iov[iovnum].iov_base = urb->transfer_buffer;
+		iov[iovnum].iov_len  = urb->actual_length;
+		iovnum++;
+		txsize += urb->actual_length;
+	} else if (urb_p->type == USB_ENDPOINT_XFER_ISOC &&
+		usb_pipein(urb->pipe)) {
+		/* FIXME - copypasted from stub_tx, refactor */
+		int i;
+
+		for (i = 0; i < urb->number_of_packets; i++) {
+			iov[iovnum].iov_base = urb->transfer_buffer +
+				urb->iso_frame_desc[i].offset;
+			iov[iovnum].iov_len =
+				urb->iso_frame_desc[i].actual_length;
+			iovnum++;
+			txsize += urb->iso_frame_desc[i].actual_length;
+		}
+
+		if (txsize != sizeof(pdu_header) + urb->actual_length) {
+			usbip_event_add(&udc->ud, VUDC_EVENT_ERROR_TCP);
+			ret = -EPIPE;
+			goto out;
+		}
+	}
+	/* else - no buffer to send */
+
+	/* 3. setup iso_packet_descriptor */
+	if (urb_p->type == USB_ENDPOINT_XFER_ISOC) {
+		ssize_t len = 0;
+
+		iso_buffer = usbip_alloc_iso_desc_pdu(urb, &len);
+		if (!iso_buffer) {
+			usbip_event_add(&udc->ud,
+					VUDC_EVENT_ERROR_MALLOC);
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		iov[iovnum].iov_base = iso_buffer;
+		iov[iovnum].iov_len  = len;
+		txsize += len;
+		iovnum++;
+	}
+
+	ret = kernel_sendmsg(udc->ud.tcp_socket, &msg,
+						iov,  iovnum, txsize);
+	if (ret != txsize) {
+		usbip_event_add(&udc->ud, VUDC_EVENT_ERROR_TCP);
+		if (ret >= 0)
+			ret = -EPIPE;
+		goto out;
+	}
+
+out:
+	kfree(iov);
+	kfree(iso_buffer);
+	free_urbp_and_urb(urb_p);
+	if (ret < 0)
+		return ret;
+	return txsize;
+}
+
+static int v_send_ret(struct vudc *udc)
+{
+	unsigned long flags;
+	struct tx_item *txi;
+	size_t total_size = 0;
+	int ret = 0;
+
+	spin_lock_irqsave(&udc->lock_tx, flags);
+	while (!list_empty(&udc->tx_queue)) {
+		txi = list_first_entry(&udc->tx_queue, struct tx_item,
+				       tx_entry);
+		list_del(&txi->tx_entry);
+		spin_unlock_irqrestore(&udc->lock_tx, flags);
+
+		switch (txi->type) {
+		case TX_SUBMIT:
+			ret = v_send_ret_submit(udc, txi->s);
+			break;
+		case TX_UNLINK:
+			ret = v_send_ret_unlink(udc, txi->u);
+			break;
+		}
+		kfree(txi);
+
+		if (ret < 0)
+			return ret;
+
+		total_size += ret;
+
+		spin_lock_irqsave(&udc->lock_tx, flags);
+	}
+
+	spin_unlock_irqrestore(&udc->lock_tx, flags);
+	return total_size;
+}
+
+
+int v_tx_loop(void *data)
+{
+	struct usbip_device *ud = (struct usbip_device *) data;
+	struct vudc *udc = container_of(ud, struct vudc, ud);
+	int ret;
+
+	while (!kthread_should_stop()) {
+		if (usbip_event_happened(&udc->ud))
+			break;
+		ret = v_send_ret(udc);
+		if (ret < 0) {
+			pr_warn("v_tx exit with error %d", ret);
+			break;
+		}
+		wait_event_interruptible(udc->tx_waitq,
+					 (!list_empty(&udc->tx_queue) ||
+					 kthread_should_stop()));
+	}
+
+	return 0;
+}
+
+/* called with spinlocks held */
+void v_enqueue_ret_unlink(struct vudc *udc, __u32 seqnum, __u32 status)
+{
+	struct tx_item *txi;
+	struct v_unlink *unlink;
+
+	txi = kzalloc(sizeof(*txi), GFP_ATOMIC);
+	if (!txi) {
+		usbip_event_add(&udc->ud, VDEV_EVENT_ERROR_MALLOC);
+		return;
+	}
+	unlink = kzalloc(sizeof(*unlink), GFP_ATOMIC);
+	if (!unlink) {
+		kfree(txi);
+		usbip_event_add(&udc->ud, VDEV_EVENT_ERROR_MALLOC);
+		return;
+	}
+
+	unlink->seqnum = seqnum;
+	unlink->status = status;
+	txi->type = TX_UNLINK;
+	txi->u = unlink;
+
+	list_add_tail(&txi->tx_entry, &udc->tx_queue);
+}
+
+/* called with spinlocks held */
+void v_enqueue_ret_submit(struct vudc *udc, struct urbp *urb_p)
+{
+	struct tx_item *txi;
+
+	txi = kzalloc(sizeof(*txi), GFP_ATOMIC);
+	if (!txi) {
+		usbip_event_add(&udc->ud, VDEV_EVENT_ERROR_MALLOC);
+		return;
+	}
+
+	txi->type = TX_SUBMIT;
+	txi->s = urb_p;
+
+	list_add_tail(&txi->tx_entry, &udc->tx_queue);
+}